2018 CATALOGUE
CO_OSAWA 2018.indd 1 25/09/17 11:49
MATERIALS HARDNESS/Rm
P1 Free cutting steel and structural steel < 500 N/mm²
P2 Carbon steel and low alloy steel 500-700 N/mm²
P3 Medium alloy steel and heat treated steel 600-800 N/mm²
P4 High alloy steel 800-1000 N/mm²
P5 Tool steel 900-1200 N/mm²
P6 High tensile strength steel 1200-1600 N/mm²
M1 Ferritic stainless steel 400-700 N/mm²
M2 Austenitic stainless steel (good machinability) 500-750 N/mm²
M3 Austenitic stainless steel (medium machinability) 550-850 N/mm²
M4 Martensitic stainless steel 650-950 N/mm²
M5 PH stainless steel 800-1250 N/mm²
K1 Grey cast iron 150-250 HB
K2 Nodular cast iron 150-350 HB
K3 Austenitic cast iron 120-260 HB
K4 ADI cast iron 250-500 HB
N1 Aluminium alloys ≤ 12% Si
N2 Aluminium alloys > 12% Si
N3 Copper
N4 Bronze and brass
N5 Plastic materials
N6 Fiber and composites
S1 Heat resistant super alloys (HRSA) - good machinability < 25 HRC
S2
Heat resistant super alloys (HRSA) - medium machinability
25-35 HRC
S3 Heat resistant super alloys (HRSA) - low machinability 35-45 HRC
S4 Low alloy titanium (good machinability)
S5 High alloy titanium (medium machinability)
H1 Hardened steel 50-56 HRC
H2 Hardened bearing steel 54-62 HRC
H3 Hardened tool steel 60-65 HRC
H4 Hardened martensitic stainless steel 50-56 HRC
H5 Hardened white cast iron 48-55 HRC
REFER TO PAGES 15-39 FOR THE COMPLETE LIST OF WORKPIECE MATERIALS.
CONSULTARE PAGG. 15-39 PER LA LISTA COMPLETA DEI MATERIALI
AUF DEN SEITEN 15 BIS 39 FÜR DIE VOLLSTÄNDIGE LISTE VON WERKSTOFFMATERIALIEN
CONSULTER DE LA PAGE 15 À LA PAGE 39 POUR LA LISTE COMPLÈTE DES MATÉRIAUX
CONSULTAR DESDE PÁG. 15 A PÁG. 39 PARA LA LISTA COMPLETA DE LOS MATERIALES
ПОЛНЫЙ СПИСОК ОБРАБАТЫВАЕМЫХ МАТЕРИАЛОВ СМОТРИ НА СТР. 15-39.
CO_OSAWA 2018.indd 2 25/09/17 11:49
2018 CATALOGUE
Osawa is a trademark owned by Sorma S.p.A. which is on a mission to provide the cutting tool market with
solid tools for milling and drilling. Based on the well-established know how of Sorma S.p.A., coming from
Japanese and European best technologies, the brand Osawa was launched in 2001 and groups different tools
manifacturers located worldwide (Europe, Far East and USA). To keep up with the evolution of production
systems and costs, Sorma is increasing its investments in China, Taiwan and Korea, always putting quality first:
Osawa producers are strictly selected on the strength of their tools’ performances and they are all certified
ISO 9001. Such structure makes Osawa able to meet a very wide spectrum of customers’ requests, even on
most critical applications. Its production flexibility together with the highly qualified direction of Sorma gives
Osawa the possibility to have high profile tools in any item of the range. Arturo Sorgato
President - Sorma S.p.A.
Osawa è un marchio registrato da Sorma S.p.A. che ha la mission di offrire al mercato dell’industria meccanica
utensili integrali per foratura e fresatura. Basato sull’esperienza maturata da Sorma con le migliori tecnologie
giapponesi ed europee, il marchio Osawa è stato lanciato nel 2001 e raggruppa diversi produttori di utensili
collocati in varie parti del mondo (Europa, Estremo Oriente e USA). Per far fronte all’evoluzione dei sistemi
e dei costi di produzione, Sorma sta incrementando i propri investimenti in Cina, Taiwan e Corea, facendo
sempre della qualità il proprio baluardo: i produttori Osawa sono selezionati severamente sulla base delle
prestazioni dei loro utensili e sono tutti certificati ISO 9001. Questa struttura permette ad Osawa di far fronte
ad un ampio quadro di richieste da parte dei clienti, anche nelle applicazioni più critiche. La sua flessibilità
produttiva, insieme alla direzione altamente qualificata di Sorma, danno la possibilità ad Osawa di offrire
utensili di alto profilo in ogni componente della gamma. Arturo Sorgato
Presidente - Sorma S.p.A.
Osawa ist eine geschützte Handelsmarke der Firma Sorma S.p.A., die als Ziel, ein umfangreiches Angebot
von Bohr- und Fräswerkzeugen für den Maschinenbau anbieten soll. Dank der langen Erfahrung, die Sorma
während der Jahrzehnte sammeln konnte, und der besten japanischen und europäischen Technologien,
wurde im Jahre 2001 die Handelsmarke Osawa gegründet. Osawa enthält hochwertige Werkzeuge von
verschiedenen ausgelesenen Herstellern aus aller Welt (Europa, Ferner Osten, USA). Um den Schritt der
ständigen Entwicklung der Fertigungsprozesse und Produktionskosten halten zu können, hat Sorma seine
Investionen in China, Taiwan und Korea erhöht, ohne selbstverständlich auf die Qualität zu verzichten,
die seit immer im Mittelpunkt steht. Die Osawa Lieferanten sind auf sehr sorgfältiger Weise ausgewählt,
verfügen alle über eine ISO 9001 Zertifizierung, und müssen die streng angeforderten Leistungsverhältnisse
der Werkzeuge einhalten können. Dieser Hintergrund ermöglicht Osawa ein sehr breites Spektrum von
Anfragen zu befriedigen, auch für die kritischsten Anwendungsfälle. Seine Flexibilität bei den verschiedenen
Fertigungsprozesse, in Verbindung mit einer hochqualifizierten Führung der Firma Sorma, gibt Osawa die
Möglichkeit hochwertige Werkzeuge in den verschiedenen Produktsegmente anzubieten. Arturo Sorgato
Präsident - Sorma S.p.A.
Osawa est une marque déposée par Sorma S.p.A. qui a la mission d’offrir au marché de l’industrie mécanique
des outils monobloc pour le perçage et le fraisage. Basée sur l’expérience acquise par Sorma avec les
meilleures technologies japonaises et européennes, la marque Osawa a été lancée en 2001 et elle regroupe
plusieurs producteurs d’outils qui se trouvent partout dans le monde (Europe, Extrême Orient et USA). Pour
faire face à l’évolution des procédés de fabrication et des couts de production, Sorma est en train d’augmenter
ses propres investissements en Chine, à Taiwan et en Corée, en faisant toujours de la qualité son point de
force : les producteurs Osawa sont sélectionnés sévèrement en fonction de la performance de leurs outils,
et sont tous certifiés ISO 9001. Cette structure permet à Osawa de faire face à un large cadre de demandes
de la part des clients, aussi dans les applications les plus critiques. Sa flexibilité productive, sous la direction
hautement qualifiée de Sorma, donne à Osawa la possibilité d’offrir des outils de haut profil pour chaque
composant de la gamme. Arturo Sorgato
Président - Sorma S.p.A.
Osawa es una marca registrada de Sorma S.p.A. cuya misión es ofrecer al mercado de la industria
mecánica herramientas integrales para el taladrado y el fresado. Basada en la experiencia adquirida por
Sorma con las mejores tecnologías Japonesas y Europeas, la marca Osawa fue lanzada en el 2001 y reúne
a diferentes fabricantes de herramientas ubicados en varias partes del mundo (Europa, Extremo Oriente
y EE.UU.). Para hacer frente a la evolución de los sistemas y de los costes de producción, Sorma está
aumentando su inversión en China, Taiwán y Corea, haciendo siempre de la calidad el propio baluarte:
los productores Osawa se seleccionan basándose en el rendimiento de sus herramientas y son todos
certificados ISO 9001. Esta estructura permite a Osawa de hacer frente a un panorama amplio de peticiones
por parte de los clientes, incluso en las aplicaciones más críticas. Su flexibilidad productiva, junto a la dirección
de profesionales altamente calificados de Sorma, dan la posibilidad a Osawa de ofrecer herramientas de alto
perfil en cada componente de la gama. Arturo Sorgato
Presidente - Sorma S.p.A.
Osawa – это марка зарегистрированная ЗАО «Sorma S.p.A.», которая включает в себя широкую гамму
продукции интегрального осевого инструмента для сверления и фрезерования, применяемого в
металлообрабатывающей промышленности. Компания «Sorma» обладает передовыми технологиями,
накопленными благодаря многолетнему опыту работы с лучшими японскими и европейскими
производителями. Марка Osawa появилась в 2001 году и объединила ведущих производителей
инструментов, расположенных в разных частях мира (Европе, Дальнем Востоке и США). Следуя
требованиям современного рынка по оптимизации стоимости и качества продукции, компания
«Sorma» увеличила свои инвестиции в производство в таких странах как Китай, Тайвань и Корея,
при условии соблюдения высочайших стандартов качества: все производители Osawa проходят
строгий контроль качества продукции и высоких производственных стандартов. Всё производство
сертифицировано согласно стандартам ISO 9001. Благодаря этому, продукция Osawa может быть
применена для решения широкого спектра даже самых сложных задач и в состоянии удовлетворить
требования потребителя возникающих при металлообработке. Гибкое производство Osawa,
совместно с высококвалифицированным специалистами компании «Sorma», позволяют предложить
качественный инструмент по всем направлениям продукции. Arturo Sorgato
Президент ЗАО «Sorma S.p.A.»
WARNING
read carefully before using our products
- Tools may chatter if broken. The wearing of eye protection is strongly
advised in the vicinity of the working area.
- The correct using condition and handling of our tools is essential to
ensure maximum life and hazard-free operation.
- Cutting tools have sharp edges and care must be taken when
handling to avoid cuts/lacerations to unprotected hands.
- The wearing of gloves is forbidden as the gloves may entangle with
turning tools.
- Tools may hurt the user’s feet when falling off. Safety shoes should
be put on at all time.
- While fitting the tools to machine spindles and/or sleeves, care
should be taken to avoid subjecting them to shock or impact.
- Check that the workpieces are properly seated and securely held in
the chuck before switching on machine power.
- Do not use a tool which cutting edges are worn-out or chipped
severely.
- Grinding operations may produce potentially hazardous dust
particles or vapour. Adequate ventilation equipment should be
provided.
VORSICHT
bitte sorgfältig durchlesen, bevor Sie unsere Produkte gebrauchen
- Beschädigte Werkzeuge können vibrieren, es wird daher dringend
empfohlen Schutzbrillen in der Nähe der Arbeitstelle zu tragen.
- Ordnungsgemäße Handhabung und Arbeitsvoraussetzung sind
Grundbedingungen für lange Lebensdauer und Sicherheit.
- Die Schneidkanten der Werkzeuge sind sehr scharf und können
ungeschützte Hände verletzen. Vorsicht bei der Handhabung.
- Handschuhe können sich mit drehenden Werkzeugen verfangen,
siesind daher verboten.
- Unfallschutzschuhe ständig anziehen: beim Hinunterfallen können
die Werkzeuge die Füße verletzten.
- Beim Einsetzen der Werkzeuge auf die Maschinen ist darauf zu
achten, Stöße zu vermeiden.
- Prüfen Sie vor Inbetriebnahme der Maschine die genaue Befestigung
der Werkstücke.
- Werkzeuge mit beschädigten Schneiden nicht mehr verwenden.
- Beim Schleifen können gefährliche Partikel oder Gase enstehen.
Angemessene Entlüftung muß gewährleistet sein.
ADVERTENCIAS
leer atentamente antes de comenzar a utilizar nuestros productos
- Si las herramientas están rotas, pueden vibrar. Se aconseja
absolutamente el uso de gafas de protección cuando se está cerca
del área de trabajo.
- El uso correcto de nuestras herramientas es esencial para asegurarse
la mayor duración y para evitar operaciones peligrosas.
- Las herramientas de corte poseen bordes muy afilados que pueden
causar heridas en las manos si no están debidamente protegidas.
- Está prohibido el uso de guantes. El tejido puede pegarse al filo y ser
arrastrado por la herramienta en rotación.
- Las herramientas que caen pueden dañar los pies del operador.
El calzado de protección contra accidentes debe usarse en
todomomento.
- Si se fija una herramienta a la máquina tener la precaución de no
averiarla.
- Controlar el posicionamiento perfecto y la fijación de la pieza a
mecanizar antes de accionar la máquina.
- No utilizar herramientas muy gastadas o averiadas.
- Cuando se afila una herramienta pueden formarse polvos y vapores
peligrosos. Disponer un sistema de ventilación adecuado.
AVVERTENZE
leggere attentamente prima dell’utilizzo dei nostri prodotti
- Gli utensili, se rotti, possono vibrare. L’uso di occhiali protettivi è
assolutamente consigliato in prossimità dell’ area di lavoro.
- Il corretto utilizzo dei nostri utensili è essenziale al fine di assicurarne
la miglior durata ed evitare operazioni pericolose.
- Gli utensili da taglio hanno un tagliente molto affilato che può
procurare ferite alle mani se non protette adeguatamente.
- L’uso di guanti è vietato. Il tessuto può legarsi al tagliente ed essere
trascinato dall’utensile in rotazione.
- Gli utensili che cadono possono danneggiare i piedi dell’operatore.
Le scarpe antinfortunistiche devono essere indossate in qualsiasi
momento
- Nel fissare l’utensile alla macchina fare sempre attenzione a non
danneggiarlo.
- Controllare il perfetto posizionamento e fissaggio del pezzo da
lavorare prima di azionare la macchina.
- Non riutilizzare utensili fortemente usurati o danneggiati.
- La riaffilatura può generare polveri e vapori pericolosi. Attrezzarsi
con un sistema di ventilazione adeguato.
AVERTISSEMENT
à lire attentivement avant utilisation de nos produits
- Les outils si cassés peuvent vibrer. Le port de lunettes de sécurité
près de la zone de travail est vivement recommandé.
- Des conditions d’emploi correctes de nos produits sont essentielles
pour assurer une durée de vie maximum et éviter des accidents.
- Les outils ont des arêtes vives et peuvent blesser les mains non
protégées.
- Le port de gants près d’outils en rotation est interdit car ils peuvent
être happés par l’outil.
- Des outils tombant à terre peuvent blesser les pieds de l’opérateur:
leport de chaussures de sécurité est conseillé.
- En montant les outils sur le porte-outils, veiller à éviter les chocs.
- S’assurer que la pièce soit parfaitement fixée avant de mettre la
machine en route.
- Ne pas utiliser des outils usés ou endommagés.
- Le réaffûtage des outils peut provoquer des vapeurs et des
poussières dangereuses qui devront être convenablement aspirées.
ПРЕДУПРЕЖДЕНИЕ
внимательно прочитайте перед использованием нашей продукции
- Повреждённый инструмент подвержен вибрациям. Настоятельно
рекомендуется использование средств защиты глаз,
в непосредственной близости от рабочей зоны.
- Правильное использование нашего инструмента обеспечит
максимальный срок его службы и безопасность работы.
- Режущий инструмент, имеет острые кромки, поэтому
необходимо соблюдать осторожность при его использовании.
- Использование перчаток запрещено, так как ткань перчатки
может зацепиться за части инструмента, что может привести к
травмам при вращении инструмента.
- При падении инструмент может повредить ноги пользователя.
Во время работы с инструментом должна быть использована
специальная защитная обувь.
- Устанавливать инструмент в станок необходимо с
осторожностью, во избежание его повреждения.
- Необходимо проверить надёжность крепления заготовки до
включения станка.
- Не использовать повторно повреждённый или пришедший
в негодность инструмент.
- Переточка инструмента может привести к образованию опасных
испарений и пыли. Строго рекомендуется использование
соответствующих вентиляционных систем.
006 .................................... Catalogue Navigation System
012 .................................... Alphanumeric index
015 .................................... ISO classification
018 .................................... Workpiece materials
040 .................................... Hardness
041 .................................... Formulas
043. CARBIDE DRILLS
051 .................................... TYPHOON TA - HTA - 4HTA general purpose
081 .................................... TYPHOON PU - HPU universal application
103 .................................... TYPHOON SUH stainless steel
117 .................................... TYPHOON ALH non-ferrous materials
127 .................................... TYPHOON HRC hardened steel 45÷62 HRC
133 .................................... TYPHOON SUH MINI short, long and extra long
165 .................................... TYPHOON HL long and extra-long
199 .................................... C-SD-TA NC spotting
203. HSS DRILLS
213 .................................... LFTA high performance
223 .................................... SUTA high performance
233 .................................... HSS - HSS/Co general purpose
299. CARBIDE END MILLS
317 .................................... G2 general purpose
363 .................................... MDTA general purpose
387 .................................... HF VH/UP universal and multi-purpose
483 .................................... MEF stainless steel and super alloys
497 .................................... ALU non ferrous materials
523 .................................... MEX steel and hardened steel 30÷55 HRC
583 .................................... UH steel and hardened steel < 70 HRC
645. HSS END MILLS
657 .................................... HSS/Co - HSSP general purpose
699. CARBIDE BURRS
701 .................................... Carbide burrs
INDEX
Catalogue Navigation System
Introduzione al catalogo Einleitung zum Katalog Introduction au catalogue Introducción al catálogo Как Пользоваться Каталогом
6
CATALOGUE STRUCTURE
SUDDIVISIONE DEL CATALOGO
AUFTEILUNG DES KATALOGS
STRUCTURE DU CATALOGUE
SUBDIVISIÓN DEL CATÁLOGO
СТРУКТУРА КАТАЛОГА
006 .................................... Catalogue Navigation System
012 .................................... Alphanumeric index
015 .................................... ISO classification
018 .................................... Workpiece materials
040 .................................... Hardness
041 .................................... Formulas
043. CARBIDE DRILLS
051 .................................... TYPHOON TA - HTA - 4HTA general purpose
081 .................................... TYPHOON PU - HPU universal application
103 .................................... TYPHOON SUH stainless steel
117 .................................... TYPHOON ALH non-ferrous materials
127 .................................... TYPHOON HRC hardened steel 45÷62 HRC
133 .................................... TYPHOON SUH MINI short, long and extra long
165 .................................... TYPHOON HL long and extra-long
199 .................................... C-SD-TA NC spotting
203. HSS DRILLS
213 .................................... LFTA high performance
223 .................................... SUTA high performance
233 .................................... HSS - HSS/Co general purpose
299. CARBIDE END MILLS
317 .................................... G2 general purpose
363 .................................... MDTA general purpose
387 .................................... HF VH/UP universal and multi-purpose
483 .................................... MEF stainless steel and super alloys
497 .................................... ALU non ferrous materials
523 .................................... MEX steel and hardened steel 30÷55 HRC
583 .................................... UH steel and hardened steel < 70 HRC
645. HSS END MILLS
657 .................................... HSS/Co - HSSP general purpose
699. CARBIDE BURRS
701 .................................... Carbide burrs
INDEX
5 MAIN SECTIONS
1 carbide drills
2 HSS drills
3 micrograin carbide end mills
4 HSS end mills
5 carbide burrs
5 MACRO SEZIONI
1 punte in metallo duro
2 punte in HSS
3 frese in metallo duro micrograna
4 frese in HSSCo e HSSP
5 lime rotative in metallo duro
5 HAUBTABSCHNITTE
1 VHM Bohrer
2 HSS Bohrer
3 VHM Fräser Mikrokörnung
4 Fräser aus HSSCo und HSSP
5 Hartmetall-Rotierfeilen
5 CHAPITRES
1 forets en carbure
2 forets en HSS
3 fraises en carbure micrograin
4 fraises en HSSCo et HSSP
5 limes rotatives en carbure
5 MACRO SECCIONES
1 brocas en metal duro
2 brocas en HSS
3 fresas en metal duro micrograno
4 fresas en HSS/Co y HSSP
5 limas rotativas en metal duro
5 ПОДРАЗДЕЛОВ
1 твёрдосплавные свёрла
2 свёрла из быстрорежущей стали
3 фрезы из мелкозернистого твёрдого сплава
4 фрезы из порошковой и легированной Со
быстрорежущей стали
5 борфрезы твёрдосплавные
1
2
3
4
5
Catalogue Navigation System
Introduzione al catalogo Einleitung zum Katalog Introduction au catalogue Introducción al catálogo Как Пользоваться Каталогом
7
006 .................................... Catalogue Navigation System
012 .................................... Alphanumeric index
015 .................................... ISO classification
018 .................................... Workpiece materials
040 .................................... Hardness
041 .................................... Formulas
043. CARBIDE DRILLS
051 .................................... TYPHOON TA - HTA - 4HTA general purpose
081 .................................... TYPHOON PU - HPU universal application
103 .................................... TYPHOON SUH stainless steel
117 .................................... TYPHOON ALH non-ferrous materials
127 .................................... TYPHOON HRC hardened steel 45÷62 HRC
133 .................................... TYPHOON SUH MINI short, long and extra long
165 .................................... TYPHOON HL long and extra-long
199 .................................... C-SD-TA NC spotting
203. HSS DRILLS
213 .................................... LFTA high performance
223 .................................... SUTA high performance
233 .................................... HSS - HSS/Co general purpose
299. CARBIDE END MILLS
317 .................................... G2 general purpose
363 .................................... MDTA general purpose
387 .................................... HF VH/UP universal and multi-purpose
483 .................................... MEF stainless steel and super alloys
497 .................................... ALU non ferrous materials
523 .................................... MEX steel and hardened steel 30÷55 HRC
583 .................................... UH steel and hardened steel < 70 HRC
645. HSS END MILLS
657 .................................... HSS/Co - HSSP general purpose
699. CARBIDE BURRS
701 .................................... Carbide burrs
INDEX
PRODUCT SEARCH
RICERCA PRODOTTI
PRODUKTSUCHE
RECHERCHE PRODUITS
BÚSQUEDA PRODUCTOS
ПОДБОР ИНСТРУМЕНТА
ALPHANUMERIC INDEX
If product code (e.g. ITEM No. 118N) is known, check
the alphanumeric index at page 12.
INDICE ALFANUMERICO
Conoscendo il codice prodotto (es. ITEM No. 118N),
consultare l’indice alfanumerico a pag. 12.
ALPHANUMERISCHER INDEX
Wenn Sie die Art.Nr kennen (z.B. ART.Nr 118N),
können Sie die entsprechende Seite durch den
Alphanumerischen Index – Seite 12 - finden.
INDEX ALPHANUMÉRIQUE
En connaissant le code produit (ex. ITEM No. 118N),
consulter l’index alphanumérique à la page 12.
ÍNDICE ALFANUMÉRICO
Conociendo el producto (ej. ITEM No. 118N),
consultar el índice alfanumérico en pág. 12.
АЛФАВИТНЫЙ УКАЗАТЕЛЬ
Если артикул (т.е. код № 118n) известен, смотрите
алфавитный указатель на стр. 12.
GENERAL AND THUMB INDEX
If product series (e.g. G2) is known, check general
index at page 5 or follow the thumb index.
INDICE E RUBRICATURA
Conoscendo la serie prodotto (es. G2), consultare
l’indice generale a pag. 5 o seguire la rubricatura.
INDEX UND DAUMEN INDEX
Wenn die Produktgruppe bekannt ist (z.B G2),
schlagen Sie im Index -Seite 5- nach, oder folgend
Sie dem Daumen Index.
INDEX ET RUBRIQUE
En connaissant la référence du produit (ex. G2),
consulter l’index général à la page 5 ou suivre la
rubrique.
ÍNDICE Y DIRECTORIO
Conociendo la serie de producto (ej. G2), consultar
el índice general en pág. 5 o seguir el directorio.
OГЛАВЛЕНИЕ И РУБРИКАТОР
Если известна серия продукции (т.е. g2), смотри
общее оглавление на стр. 5 или используйте
pубрикатор.
Alphanumeric index
Indice alfanumerico Alphanumerischer I
n
ITEM No. PAGE
118N 234
134N (234NVA) 272
1385NTI (1386STI) 243
1386STI 243
1386STI SET 246
138HB 254
ITEM
N
G2211
G2212
G2250
G2251
G2310
G2311
G2 - General purpose - Ball nose
357
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
h stock standard f non-standard stock m stock exhaustion
D D Tol. R R Tol. d(h6) l l1 L Z EDP No. Stock
10/-0.020 0.50 +/-0.015 4 2 50 2 G2CSB2010 h
1.5 0/-0.020 0.75 +/-0.015 4 3 50 2 G2CSB2015 h
20/-0.020 1.00 +/-0.015 4 4 50 2 G2CSB2020 h
2.5 0/-0.020 1.25 +/-0.015 4 5 50 2 G2CSB2025 h
30/-0.020 1.50 +/-0.015 4 6 50 2 G2CSB2030 h
3.5 0/-0.020 1.75 +/-0.015 4 7 50 2 G2CSB2035 h
40/-0.020 2.00 +/-0.015 4 8 50 2 G2CSB2040 h
4.5 0/-0.020 2.25 +/-0.015 6 9 50 2 G2CSB2045 h
50/-0.020 2.50 +/-0.015 6 10 50 2 G2CSB2050 h
5.5 0/-0.020 2.75 +/-0.015 6 11 50 2 G2CSB2055 h
60/-0.020 3.00 +/-0.015 6 12 50 2 G2CSB2060 h
6.5 0/-0.025 3.25 +/-0.015 8 13 60 2 G2CSB2065 h
70/-0.025 3.50 +/-0.015 8 14 60 2 G2CSB2070 h
80/-0.025 4.00 +/-0.015 8 16 60 2 G2CSB2080 h
90/-0.025 4.50 +/-0.015 10 18 75 2 G2CSB2090 h
10 0/-0.025 5.00 +/-0.015 10 20 75 2 G2CSB2100 h
12 0/-0.025 6.00 +/-0.015 12 24 75 2 G2CSB2120 h
16 0/-0.030 8.00 +/-0.015 16 30 92 2 G2CSB2160 h
20 0/-0.030 10.00 +/-0.015 20 30 100 2 G2CSB2200 h
G2CSB2
cylindrical shank, 2 flutes ball nose
OSAWA
NORM
<45
HRC
PMKNSH
+,+,
+ 1st choice , suitable
COPYING
R
1
2
Catalogue Navigation System
Introduzione al catalogo Einleitung zum Katalog Introduction au catalogue Introducción al catálogo Как Пользоваться Каталогом
8
SELECTION GUIDE
An easy graphic index with tool and application
information is available at the beginning of each
section.
GUIDA ALLA SELEZIONE
All’inizio di ogni macro sezione è disponibile un
indice grafico con informazioni relative all’utensile e
alle sue applicazioni.
AUSWAHLHILFE
Am Anfang von jedem Hauptabschnitt ist ein
grafischer Index, mit Infos bezüglich des Werkzeugs
und seinem Anwendungsfeld, vorhanden.
GUIDE DE SÉLECTION
Un index graphique avec les informations relatives à
l’outil et à ses applications est disponible au début
de chaque chapitre.
GUÍA DE SELECCIÓN
Al inicio de cada macro sección está disponible
un índice gráfico con informaciones relativas a la
herramienta y a sus aplicaciones.
ПОМОЩНИК ПО ПОДБОРУ
В начале каждого подраздела находиться
простой графический индекс инструмента,
который даёт информацию об инструменте и его
применении.
Selection Guide
Indice grafico Auswahlhilfe Indice graphique Índice gráfico Руководство по выбору
46
ITEM No. PAGE
TA-HTA-4HTA general purpose
3xD - 5xD - 8xD
343TA 54
318N 54
353TA 58
353HTA 58
355TA 66
355HTA 66
3584HTA 74
PU-HPU universal application
3xD - 5xD
353PU 83
353HPU 83
355PU 92
355HPU 92
SUH stainless steel
3xD - 5xD
353SUH 105
355SUH 111
ALH non-ferrous material
3xD - 5xD
353ALH 119
355ALH 123
HRC hardened steel 45-62 HRC
3xD 353HRC 129
SUH MINI short and long
5xD ÷ 30xD
355SUH MINI 111
358SUH MINI 144
3512SUH MINI 148
3520SUH MINI 152
3525SUH MINI 156
3530SUH MINI 160
HL long and extra long
12xD ÷ 30xD
3512HL 173
3515HL 178
3520HL 183
3525HL 188
3530HL 193
NC spotting
90° - 120°
CS-D-TA 90 200
CS-D-TA 120 200
Selection Guide
Indice grafico Auswahlhilfe Indice graphique Índice gráfico Руководство по выбору
47
RANGE DRILLING
DEPTH NORM TYPE MATERIAL /
COATING HRC POINT
ANGLE
HELIX
ANGLE
CHAMFER
ISO P ISO M ISO K ISO N ISO S ISO H
1-16 3xD DIN6539 TA MG
PV200 140° 30° +,,,
1-13 3xD DIN6539 TA MG
BR 140° 30° +,,
,
3-20 3xD DIN6537K TA MG
PV200 140° 30° +,, ,
3-20 3xD DIN6537K HTA MG
PV200 140° 30° +,,,,
3-20 5xD DIN3537L TA MG
PV200 140° 30° +,, ,
3-20 5xD DIN3537L HTA MG
PV200 140° 30° +,,,,
3-16 8xD OSAWA 4HTA MG
PV300 140° 30° +++,,
3-20 3xD DIN6537K PU MG
PV250 140° 30° 45° +++,+
3-20 3xD DIN6537K HPU MG
PV250 140° 30° 45° +++,+
3-20 5xD DIN6537L PU MG
PV250 140° 30° 45° +++,+
3-20 5xD DIN6537L HPU MG
PV250 140° 30° 45° +++,+
3-20 3xD DIN6537K SUH MG
PV300 140° 30° ,+,,,
3-20 5xD DIN6537L SUH MG
PV300 140° 30° ,+,,,
3-20 3xD DIN6537K ALH MG
POLISHED 130° 30° +
3-20 5xD DIN6537L ALH MG
POLISHED 130° 30° +
2.6-14.2 3xD DIN6537K HRC MG
PV1000 45-62 150° 15° 45° +
1-3 5xD OSAWA SUH
MINI
MG
PV300 135° 30° +++,,
1-3 8xD OSAWA SUH
MINI
MG
PV300 135° 30° +++,,
1-3 12xD OSAWA SUH
MINI
MG
PV300 135° 30° +++,,
1-3 20xD OSAWA SUH
MINI
MG
PV300 135° 30° +++,,
1-3 25xD OSAWA SUH
MINI
MG
PV300 135° 30° +++,,
1-3 30xD OSAWA SUH
MINI
MG
PV300 135° 30° +++,,
3.1-10 12xD OSAWA HL MG
PV250 135° 30° +++,,
3.1-10 15xD OSAWA HL MG
PV250 135° 30° +++,,
3.1-10 20xD OSAWA HL MG
PV250 135° 30° +++,,
3.1-9.5 25xD OSAWA HL MG
PV250 135° 30° +++,,
3.1-8 30xD OSAWA HL MG
PV250 135° 30° +++,,
6-16 OSAWA SD MG
PV200 90° 30° ++++,
6-16 OSAWA SD MG
PV200 120° 30° ++++,
+ 1st choice , suitable
3
PRODUCT SEARCH
RICERCA PRODOTTI
PRODUKTSUCHE
RECHERCHE PRODUITS
BÚSQUEDA PRODUCTOS
ПОДБОР ИНСТРУМЕНТА
SELECTION GUIDE INDEX
CARBIDE DRILLS page 46
HSS DRILLS page 208
CARBIDE END MILLS page 304
HSS END MILLS page 650
CARBIDE BURRS page 700
Catalogue Navigation System
Introduzione al catalogo Einleitung zum Katalog Introduction au catalogue Introducción al catálogo Как Пользоваться Каталогом
9
SYSTEM CHART
An easy guide to the application range by work-
piece material, for each tool series is available at the
beginning of each section.
SYSTEM CHART
All’inizio di ogni macro sezione per ogni famiglia di
utensili è disponibile un sistema di grafici applicativi
in base al materiale da lavorare.
SYSTEM CHART
Am Anfang von jedem Hauptabschnitt stehen
Diagramme für die verschiedenen Werkzeuge, die
je nach zu bearbeitendem Material erstellt sind, zur
Verfügung.
SYSTEM CHART
Au début de chaque chapitre, pour chaque famille
d’outils, un système graphique d’application est
disponible sur la base de la matière à usiner.
SYSTEM CHART
Al inicio de cada macro sección para cada família de
herramientas está disponible un sistema de tablas
aplicativas en base al material a mecanizar.
SYSTEM CHART
В начале каждого подраздела, для каждой
группы инструмента находиться система
графических диаграмм соответствующих типу
обрабатываемого материала.
System charts
Grafici applicativi Anwendungsgrafiken Graphiques d’application Gráficos aplicativos Диаграммы
48
ISO P
ISO M
TA+
HTA+
4HTA+
Vc [m/min]
40 80 120 160
400
600
800
1000
1300
Rm [N/mm2]
HL+
SUH mini+
PU+
HPU+
SUH,
Vc [m/min]
25 50 75 100
high
medium
high
medium
low
low
Machinability
SUH+
PU+
PUH+
S
HL+
SUH mini+
TA,
HTA,
4HTA+
STEEL APPLICATION
STAINLESS STEEL APPLICATION
TA : general purpose (page 51)
HTA : general purpose with inside coolant (page 51)
4HTA : 4 margins general purpose with inside coolant (page 51)
PU : universal purpose (page 81)
HPU : universal purpose with inside coolant (page 81)
SUH : special purpose with inside coolant (page 103)
SUH MINI : miniature 5xD ÷ 30xD with inside coolant (page 133)
HL : long 12xD ÷ 30xD (page 165)
+ 1st choice , suitable
+ 1st choice , suitable
System charts
Grafici applicativi Anwendungsgrafiken Graphiques d’application Gráficos aplicativos Диаграммы
49
ISO K
ISO N
Vc [m/min]
50 100 150 200
100
200
300
400
HB hardness
Vc [m/min]
150 200 250 300
4
8
Si %
12
16
20
HL
UH
TA+
HTA+
4HTA+
SUH,
PU+
HPU+
HL,
SUH mini,
ALH+
PU,
HPU,
SUH,
HTA,
4HTA,
CAST IRON APPLICATION
NON-FERROUS MATERIALS APPLICATION
HL+
SUH mini+
TA : general purpose (page 51)
HTA : general purpose with inside coolant (page 51)
4HTA : 4 margins general purpose with inside coolant (page 51)
PU : universal purpose (page 81)
HPU : universal purpose with inside coolant (page 81)
SUH : special purpose with inside coolant (page 103)
ALH : special purpose with inside coolant (page 117)
SUH MINI : miniature 5xD ÷ 30xD with inside coolant (page 133)
HL : long 12xD ÷ 30xD (page 165)
+ 1st choice , suitable
+ 1st choice , suitable
4
PRODUCT SEARCH
RICERCA PRODOTTI
PRODUKTSUCHE
RECHERCHE PRODUITS
BÚSQUEDA PRODUCTOS
ПОДБОР ИНСТРУМЕНТА
SYSTEM CHART INDEX
CARBIDE DRILLS page 48
HSS DRILLS page 210
CARBIDE END MILLS page 314
HSS END MILLS page 654
Catalogue Navigation System
Introduzione al catalogo Einleitung zum Katalog Introduction au catalogue Introducción al catálogo Как Пользоваться Каталогом
10
PRODUCT PAGE
PAGINA PRODOTTO
SEITE DES PRODUKTS
PAGE PRODUIT
PÁGINA PRODUCTO
СТРАНИЦА АРТИКУЛА
G2 - General purpose - Square
320
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
h stock standard f non-standard stock m stock exhaustion
D D Tol. C C Tol. d(h6) l l1 L Z EDP No. Stock
10/-0.020 4 3 50 2 G2CS2010 h
1.5 0/-0.020 4 4.5 50 2 G2CS2015 h
20/-0.020 4 6 50 2 G2CS2020 h
2.5 0/-0.020 4 7 50 2 G2CS2025 h
30/-0.020 4 8 50 2 G2CS2030 h
3.5 0/-0.020 4 10 50 2 G2CS2035 h
40/-0.020 4 11 50 2 G2CS2040 h
4.5 0/-0.020 6 13 50 2 G2CS2045 h
50/-0.020 6 13 50 2 G2CS2050 h
5.5 0/-0.020 6 13 50 2 G2CS2055 h
60/-0.020 6 15 50 2 G2CS2060 h
6.5 0/-0.025 8 17 60 2 G2CS2065 h
70/-0.025 8 17 60 2 G2CS2070 h
7.5 0/-0.025 8 17 60 2 G2CS2075 h
80/-0.025 8 20 60 2 G2CS2080 h
8.5 0/-0.025 10 23 75 2 G2CS2085 h
90/-0.025 10 23 75 2 G2CS2090 h
10 0/-0.025 10 30 75 2 G2CS2100 h
10.5 0/-0.025 12 25 75 2 G2CS2105 h
11 0/-0.025 12 28 75 2 G2CS2110 h
12 0/-0.025 12 30 75 2 G2CS2120 h
13 0/-0.030 16 33 100 2 G2CS2130 h
14 0/-0.030 14 26 83 2 G2CS2140 h
15 0/-0.030 16 40 100 2 G2CS2150 h
16 0/-0.030 16 32 92 2 G2CS2160 h
17 0/-0.030 20 40 100 2 G2CS2170 h
18 0/-0.030 20 40 100 2 G2CS2180 h
20 0/-0.030 20 40 100 2 G2CS2200 h
G2CS2
cylindrical shank, 2 flutes
OSAWA
NORM
<45
HRC
PMKNSH
+,+,
+ 1st choice , suitable
SLOTTING
SIDE MILLING
DRILLING
Product code or ITEM nr.
Codice prodotto o ITEM No.
Name des Produkts oder Artikelnummer
Code produit ou ITEM No.
Código producto o ITEM No.
Артикул или КОД №
Icons
Icone descrittive
Beschreibende Symbole
Icônes descriptives
Iconos descriptivos
Икона
ISO Materials table with black or white stars to
indicate applicability
Tabella materiali ISO con stellina nera o bianca
per indicazione applicabilità
ISO Materialtabelle, mit weissem oder schwarzem
Stern je nach Anwendbarkeit
Tableau des matières ISO avec étoile noire ou
blanche pour indiquer l’application
Tabla materiales ISO con estrella negra y blanca
para indicar aplicabilidad
Таблица материалов ISO с чёрными или белыми
звёздочками обозначающие применяемость
Machining icons available also in the parameters
tables (Only for milling)
Icone di lavorazione, riportate anche nelle tabelle
parametri (solo per fresatura)
Bearbeitungssymbole, sind auch bei der Tabelle
der Parameter vorhanden (nur für Fräsen)
Icônes d’usinage, reportées également dans le
tableau des paramètres (seulement pour le fraisage).
Iconos de mecanizado, indicados también en la
tabla de parámetros (solo para fresado)
Иконки обработки обозначенные также в
таблицах с рабочими параметрами (Только для
фрезерования)
Dimensions table with EDP Nr. and stock
classification
Tabella dimensionale con codice prodotto (EDP
No.) e classificazione stock
Tabelle mit Abmessungen, Art.Nummer (EDP Nr.),
Verfügbarkeit
Tableau des dimensions avec code produit (EDP
No.) et classification du stock
Tabla de dimensiones con código producto (EDP
No.) y clasificación de stock
Таблица размеров с кодом артикула и
складской классификацией
Catalogue Navigation System
Introduzione al catalogo Einleitung zum Katalog Introduction au catalogue Introducción al catálogo Как Пользоваться Каталогом
11
PRODUCT PAGE
PAGINA PRODOTTO
SEITE DES PRODUKTS
PAGE PRODUIT
PÁGINA PRODUCTO
СТРАНИЦА АРТИКУЛА
G2 - General purpose - Square
320
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
h stock standard f non-standard stock m stock exhaustion
D D Tol. C C Tol. d(h6) l l1 L Z EDP No. Stock
10/-0.020 4 3 50 2 G2CS2010 h
1.5 0/-0.020 4 4.5 50 2 G2CS2015 h
20/-0.020 4 6 50 2 G2CS2020 h
2.5 0/-0.020 4 7 50 2 G2CS2025 h
30/-0.020 4 8 50 2 G2CS2030 h
3.5 0/-0.020 4 10 50 2 G2CS2035 h
40/-0.020 4 11 50 2 G2CS2040 h
4.5 0/-0.020 6 13 50 2 G2CS2045 h
50/-0.020 6 13 50 2 G2CS2050 h
5.5 0/-0.020 6 13 50 2 G2CS2055 h
60/-0.020 6 15 50 2 G2CS2060 h
6.5 0/-0.025 8 17 60 2 G2CS2065 h
70/-0.025 8 17 60 2 G2CS2070 h
7.5 0/-0.025 8 17 60 2 G2CS2075 h
80/-0.025 8 20 60 2 G2CS2080 h
8.5 0/-0.025 10 23 75 2 G2CS2085 h
90/-0.025 10 23 75 2 G2CS2090 h
10 0/-0.025 10 30 75 2 G2CS2100 h
10.5 0/-0.025 12 25 75 2 G2CS2105 h
11 0/-0.025 12 28 75 2 G2CS2110 h
12 0/-0.025 12 30 75 2 G2CS2120 h
13 0/-0.030 16 33 100 2 G2CS2130 h
14 0/-0.030 14 26 83 2 G2CS2140 h
15 0/-0.030 16 40 100 2 G2CS2150 h
16 0/-0.030 16 32 92 2 G2CS2160 h
17 0/-0.030 20 40 100 2 G2CS2170 h
18 0/-0.030 20 40 100 2 G2CS2180 h
20 0/-0.030 20 40 100 2 G2CS2200 h
G2CS2
cylindrical shank, 2 flutes
OSAWA
NORM
<45
HRC
PMKNSH
+,+,
+ 1st choice , suitable
SLOTTING
SIDE MILLING
DRILLING
G2 - General purpose - Square
321
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
CUTTING PARAMETERS
G2CS2
SLOTTING
Material Group
ISO 513 P1 P2 K1 P3 P4 M1 M2 K2 P5 M3 K3 N1 N2 N3 N4
Hardness/Rm < 700 N/mm² 700-1000 N/mm² < 40 HRC
ap x ae 0.5D x D 0.5D x D 0.5D x D 0.5D x D
Vc (m/min) 80-100 50-70 30-50 100-120
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
128660 0.004 230 19110 0.003 130 12740 0.003 80 35030 0.005 360
214330 0.008 230 9550 0.007 130 6370 0.006 80 17520 0.010 360
39550 0.012 230 6370 0.010 130 4250 0.009 80 11680 0.016 360
47170 0.016 230 4780 0.014 130 3180 0.012 80 8760 0.021 360
55730 0.020 230 3820 0.017 130 2550 0.015 80 7010 0.026 360
64780 0.025 240 3180 0.021 140 2120 0.019 80 5840 0.033 380
83580 0.032 230 2390 0.027 130 1590 0.024 80 4380 0.042 360
10 2870 0.038 220 1910 0.032 120 1270 0.029 70 3500 0.049 350
12 2390 0.045 220 1590 0.038 120 1060 0.034 70 2920 0.059 340
14 2050 0.052 210 1360 0.044 120 910 0.039 70 2500 0.068 340
16 1790 0.060 210 1190 0.051 120 800 0.045 70 2190 0.078 340
18 1590 0.070 220 1060 0.060 130 710 0.053 70 1950 0.091 350
20 1430 0.080 230 960 0.068 130 640 0.060 80 1750 0.104 360
< D3 mm: ap = 0.2D
SIDE MILLING
Material Group
ISO 513 P1 P2 K1 P3 P4 M1 M2 K2 P5 M3 K3 N1 N2 N3 N4
Hardness/Rm < 700 N/mm² 700-1000 N/mm² < 40 HRC
ap x ae 1.5D x 0.5D 1.5D x 0.5D 1.5D x 0.5D 1.5D x 0.5D
Vc (m/min) 80-100 50-70 30-50 100-120
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
128660 0.005 280 19110 0.004 160 12740 0.004 90 35030 0.006 440
214330 0.010 280 9550 0.008 160 6370 0.007 90 17520 0.012 440
39550 0.014 280 6370 0.012 160 4250 0.011 90 11680 0.019 440
47170 0.019 280 4780 0.016 160 3180 0.014 90 8760 0.025 440
55730 0.024 280 3820 0.020 160 2550 0.018 90 7010 0.031 440
64780 0.030 290 3180 0.026 160 2120 0.023 100 5840 0.039 460
83580 0.038 270 2390 0.033 160 1590 0.029 90 4380 0.050 440
10 2870 0.046 260 1910 0.039 150 1270 0.034 90 3500 0.059 410
12 2390 0.054 260 1590 0.046 150 1060 0.041 90 2920 0.070 410
14 2050 0.062 260 1360 0.053 140 910 0.047 90 2500 0.081 410
16 1790 0.072 260 1190 0.061 150 800 0.054 90 2190 0.094 410
18 1590 0.084 270 1060 0.071 150 710 0.063 90 1950 0.109 430
20 1430 0.096 270 960 0.082 160 640 0.072 90 1750 0.125 440
< D3 mm: ae = 0.2D
DRILLING
Material Group
ISO 513 P1 P2 K1 P3 P4 M1 M2 K2 P5 M3 K3 N1 N2 N3 N4
Hardness/Rm < 700 N/mm² 700-1000 N/mm² < 40 HRC
ap x ae 0.5D x D 0.5D x D 0.5D x D 0.5D x D
Vc (m/min) 70-90 40-60 25-35 80-100
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
125480 0.002 120 15920 0.002 60 9550 0.002 30 28660 0.003 180
212740 0.005 120 7960 0.004 60 4780 0.004 30 14330 0.006 180
38490 0.007 120 5310 0.006 60 3180 0.005 30 9550 0.009 180
46370 0.010 120 3980 0.008 60 2390 0.007 30 7170 0.012 180
55100 0.012 120 3180 0.010 60 1910 0.009 30 5730 0.016 180
64250 0.015 130 2650 0.013 70 1590 0.011 40 4780 0.020 190
83180 0.019 120 1990 0.016 60 1190 0.014 30 3580 0.025 180
10 2550 0.023 120 1590 0.019 60 960 0.017 30 2870 0.030 170
12 2120 0.027 110 1330 0.023 60 800 0.020 30 2390 0.035 170
14 1820 0.031 110 1140 0.027 60 680 0.023 30 2050 0.041 170
16 1590 0.036 110 1000 0.031 60 600 0.027 30 1790 0.047 170
18 1420 0.042 120 880 0.036 60 530 0.032 30 1590 0.055 170
20 1270 0.048 120 800 0.041 70 480 0.036 30 1430 0.062 180
< D3 mm: ap = 0.5D
PARAMETERS TABLE
Cutting parameters table is available next to each
product page for easier and faster consultation.
TABELLA PARAMETRI
La tabella dei parametri di lavorazione è riportata
di seguito ad ogni pagina prodotto per una
consultazione più semplice e rapida.
TABELLE DER PARAMETER
Die Tabelle der Parameter folgt nach jeder Seite der
Produkte, um auf dieser Weise sofort griffbereit zu
sein.
TABLEAU DES PARAMÈTRES
Le tableau des paramètres d’usinage se trouve après
chaque page produit pour une consultation plus
facile et rapide.
TABLA DE PARÁMETROS
La tabla de parámetros de corte está disponible al
lado de cada página producto para una consulta
más rápida y simple.
ТАБЛИЦА РАБОЧИХ ПАРАМЕТРОВ
Для лёгкого и быстрого поиска рабочих
параметров обработки таблица с их
указанием находится на следующей странице
соответствующего артикула.
Alphanumeric index
Indice alfanumerico Alphanumerischer Index Index alphanumérique Índice alfanumérico Алфавитный указатель
12
ITEM No. PAGE
118N 234
134N (234NVA) 272
1385NTI (1386STI) 243
1386STI 243
1386STI SET 246
138HB 254
138N 248
138N SET 252
138NTI 248
138WB 258
145N 285
145NTI 285
1692LS 281
1693LS 283
218LFTA 214
218NVA 239
234LS 276
234LSTH 276
234NVA 272
2385NTI (2386STI) 262
2386STI 262
2386STI SET 265
238LFTA 218
238NVA 267
238NVA SET 270
241LS 292
245N 290
2691LS 279
2691LSTH 279
2701LS 294
2702LS 296
318N 54
343TA 54
3512HL 173
3512SUH MINI 148
3515HL 178
3520HL 183
3520SUH MINI 152
3525HL 188
3525SUH MINI 156
3530HL 193
3530SUH MINI 160
353ALH 119
353HPU 83
353HRC 129
353HTA 58
353PU 83
353SUH 105
353TA 58
355ALH 123
355HPU 92
355HTA 66
355PU 92
355SUH 111
355SUH MINI 140
355TA 66
3584HTA 74
358SUH MINI 144
980SUTA 224
990SUTA 228
A15FW 716
A16FW 716
BUR10 716
CSDTA 120° 200
CSDTA 90° 200
FFR 687
FM 685
G2210 324
ITEM No. PAGE
G2211 324
G2212 324
G2250 359
G2251 359
G2310 333
G2311 333
G2312 333
G2410 341
G2411 341
G2412 341
G2413 341
G2CL4R 353
G2CS2 320
G2CS2R 349
G2CS4 337
G2CS4R 351
G2CSB2 357
G2CSB4 361
G2CSFR 345
G2CSH3 329
G2CSHM 343
G2WS2 322
G2WS4 339
G2WSFR 347
G2WSH3 331
GB205 318
GB255 355
GB305 327
GB405 335
HF342 418
HF440 394
HF441 399
HF442 425
HF443 430
HF444 409
HF445 413
HF450 467
HF451 471
HF452 479
HF542 435
HF642 446
HF643 449
HF742 452
HF743 455
HF840 390
HF842 421
HF844 405
HF850 463
HF852 475
HF861 458
HF942 438
HF943 442
HFA53 504
HFAL3 501
HFAL4 498
MCA212R 519
MDA310 514
MDA311 514
MDA312 514
MDCAB2 521
MDCL2 368
MDCL4 378
MDCSA1 507
MDCSA2 509
MDCSA3 512
MDCSAM 517
MDTA210 366
MDTA250 384
ITEM No. PAGE
MDTA410 376
MDTACS2 364
MDTACS3 370
MDTACS4 374
MDTACSB2 382
MDTAUPR 380
MDTAWSH3 372
MEF600 490
MEF901 492
MEF902 494
MEFCS2 484
MEFCS4 488
MEFCSH3 486
MEX253 581
MEX410R 558
MEX610R 562
MEX611R 564
MEXCL2 535
MEXCL4 539
MEXCLHM 543
MEXCLSB2 579
MEXCS2 533
MEXCS4 537
MEXCS4R 555
MEXCSB2 577
MEXCSFR 545
MEXCSHM 541
MEXLN2 528
MEXLN2R 547
MEXLNB2 570
MEXLNB206 575
MEXLS2R 553
MEXLS4R 560
MEXM2 524
MEXM2SC 526
MEXMB2 566
MEXMB2SC 568
SA 703
SB 704
SC 705
SD 706
SE 707
SF 708
SG 709
SH 710
SJ 711
SK 712
SL 713
SM 714
SN 715
TAFFR 687
TAFM 685
TAWL2 661
TAWL3 667
TAWL4(6) 673
TAWLB2 683
TAWLFR 679
TAWS2 658
TAWS3 665
TAWS4(6) 671
TAWSB2 681
TAWSFR 677
TAWSH3 669
TAWSR 675
UH211 597
UH212 599
UH250 640
UH253 642
ITEM No. PAGE
UH410 614
UH411 617
UH412 619
UH413 621
UH600 591
UH610R 623
UH611R 625
UH612 593
UHCRB2 636
UHCS2 604
UHCS4 612
UHCSB2 638
UHF4 610
UHF4LN 606
UHLN2 586
UHLNB2 631
UHM204 584
UHM206 595
UHMB204 627
UHMB206 629
UMWS2 658
UMWS4 671
UMWSFR 677
WCR 689
WDC 45° 691
WDC 60° 691
WDD 45° 693
WDD 60° 693
WL2 661
WL3 667
WL4(6) 673
WLB2 683
WLFR 679
WS2 658
WS3 665
WS4(6) 671
WSA2 663
WSB2 681
WSFR 677
WTM 695
WWK 697
INFO
ISO CLASSIFICATION . 15
WORKPIECE MATERIALS . 018
HARDNESS . 040
FORMULAS . 041
ISO classification
15
TYPHOON
PU-HPU
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
INFO
MATERIALS HARDNESS/Rm
P1
Free cutting steel and structural steel
Acciai automatici e acciai strutturali
Automatenstähle und Baustähle
Aciers pour décolletage et aciers structurels
Aceros de fácil mecanización y aceros de construcción
Автоматные и конструкционные стали
< 500 N/mm²
P2
Carbon steel and low alloy steel
Acciai al carbonio e acciai basso legati
Kohlenstoff-Stähle und niedriglegierte Stähle
Aciers au carbone et aciers faiblement alliés
Aceros al carbono y aceros de baja aleación
Углеродистые и низколегированные стали
500-700 N/mm²
P3
Medium alloy steel and heat treated steel
Acciai medio legati e acciai di bonifica
Mittellegierte Stähle und Vergütungsstähle
Aciers moyennement alliés et aciers trempés et recuits
Aceros de media aleación y aceros bonificados
Среднелегированные и отоженные стали
600-800 N/mm²
P4
High alloy steel
Acciai alto legati
Hochlegierte Stähle
Aciers fortement alliés
Aceros de alta aleación
Высоколегированные стали
800-1000 N/mm²
P5
Tool steel
Acciai per utensili
Werkzeugstähle
Aciers pour outils
Aceros para herramientas
Инструментальные стали
900-1200 N/mm²
P6
High tensile strength steel
Acciai ad alta resistenza
HSLA-Stähle
Aciers haute résistance
Aceros de alta resistencia
Высокопрочная сталь
1200-1600 N/mm²
M1
Ferritic stainless steel
Acciai inossidabili ferritici
Ferritische Edelstähle
Aciers inoxydables ferritiques
Aceros inoxidables ferríticos
Ферритные нержавеющие стали
400-700 N/mm²
M2
Austenitic stainless steel (good machinability)
Acciai inossidabili austenitici - buona lavorabilità
Austenitische Edelstähle - gute Verarbeitbarkeit
Aciers inoxydables austénitiques - bonne usinabilité
Aceros inoxidables austeníticos - fácil mecanización
Аустенитные нержавеющие стали (хорошая обрабатываемость)
500-750 N/mm²
M3
Austenitic stainless steel (medium machinability)
Acciai inossidabili austenitici - media lavorabilità
Austenitische Edelstähle - mittlere Verarbeitbarkeit
Aciers inoxydables austénitiques - moyenne usinabilité
Aceros inoxidables austeníticos - maquinabilidad media
Аустенитные нержавеющие стали (средняя обрабатываемость)
550-850 N/mm²
M4
Martensitic stainless steel
Acciai inossidabili martensitici
Martensitische Edelstähle
Aciers inoxydables martensitiques
Aceros inoxidables martensíticos
Мартенситные нержавеющие стали
650-950 N/mm²
M5
PH stainless steel
Acciai inossidabili PH - indurenti per precipitazione
Ausscheidungshärtbare Edelstähle
Aciers inoxydables à durcissement par précipitation
Aceros inoxidables PH
Нержавеющие стали PH
800-1250 N/mm²
ISO classification
16
TYPHOON
PU-HPU
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
INFO
MATERIALS HARDNESS/Rm
K1
Grey cast iron
Ghise grigie
Grauguss
Fonte grise
Fundición gris
Серый чугун
150-250 HB
K2
Nodular cast iron
Ghise sferoidali
Sphäroguss
Fonte nodulaire
Fundición nodular
Чугун с шаровидным графитом
150-350 HB
K3
Austenitic cast iron
Ghise austenitiche
Austenitischer Guss
Fonte austénitique
Fundición austenítica
Аустенитный чугун
120-260 HB
K4
ADI cast iron
Ghise ADI
ADI Guss
Fonte ADI
Fundición ADI
Отпущенный ковкий чугун
250-500 HB
N1
Aluminium alloys ≤ 12% Si
Leghe di alluminio ≤ 12% Si
Aluminiumlegierungen ≤ 12% Si
Alliages d'aluminium ≤ 12 % Si
Aleación de aluminio ≤ 12% Si
Алюминиевое литье ≤ 12% Si
N2
Aluminium alloys > 12% Si
Leghe di alluminio > 12% Si
Aluminiumlegierungen > 12% Si
Alliages d'aluminium > 12 % Si
Aleación de aluminio > 12% Si
Алюминиевое литье > 12% Si
N3
Copper
Rame
Kupfer
Cuivre
Cobre
Медные сплавы
N4
Bronze and brass
Bronzo e ottone
Bronze und Messing
Bronze et laiton
Bronce y latón
Бронзы и Латуни
N5
Plastic materials
Materiali plastici
Kunstoffmaterialien
Matériaux plastiques
Materiales plásticos
Пластические материалы
N6
Fiber and composites
Fibre e compositi
Faserwerkstoffe und Verbundwerkstoffe
Fibres et composites
Fibras y compuestos
Композитные материалы
ISO classification
17
TYPHOON
PU-HPU
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
INFO
MATERIALS HARDNESS/Rm
S1
Heat resistant super alloys (HRSA) - good machinability
Leghe resistenti al calore - buona lavorabilità
Warmfeste Legierungen - gute Verarbeitbarkeit
Alliages résistants à la chaleur - bonne usinabilité
Aleaciones resistentes al calor de facil mecanización
Жаропрочные суперсплавы (хорошая обрабатываемость)
< 25 HRC
S2
Heat resistant super alloys (HRSA) - medium machinability
Leghe resistenti al calore - media lavorabilità
Warmfeste Legierungen - mittlere Verarbeitbarkeit
Alliages résistants à la chaleur - moyenne usinabilité
Aleaciones resistentes al calor de media mecanización
Жаропрочные суперсплавы (средняя обрабатываемость)
25-35 HRC
S3
Heat resistant super alloys (HRSA) - low machinability
Leghe resistenti al calore - difficile lavorabilità
Warmfeste Legierungen - schwere Verarbeitbarkeit
Alliages résistants à la chaleur - faible usinabilité
Aleaciones resistentes al calor de difícil mecanización
Жаропрочные суперсплавы (плохая обрабатываемость)
35-45 HRC
S4
Low alloy titanium (good machinability)
Leghe di titanio basso legate e medio legate
Niedriglegierte und mittellegierte Titanlegierungen
Alliages de titane faiblement alliés et moyennement alliés
Aleaciones de titanio
de fácil mecanización
Низколегированные титановые сплавы (хорошая обрабатываемость)
S5
High alloy titanium (medium machinability)
Leghe di titanio medio legate e alto legate
Mittellegierte und hochlegierte Titanlegierungen
Alliages de titane moyennement alliés et fortement alliés
Aleaciones de titanio
de media mecanización
Высоколегированные титановые сплавы (средняя обрабатываемость)
H1
Hardened steel
Acciai temprati generali
Allgemeine gehärtete Stähle
Aciers trempés
Aceros templados
Закаленные стали
50-56 HRC
H2
Hardened bearing steel
Acciai temprati per cuscinetti
Gehärtete Kugellagerstähle
Aciers trempés pour roulements
Aceros templados para rodamientos
Закаленные подшипниковые стали
54-62 HRC
H3
Hardened tool steel
Acciai temprati per utensili
Gehärtete Werkzeugstähle
Aciers trempés pour outils
Aceros templados para herramientas
Закаленные инструментальные стали
60-65 HRC
H4
Hardened martensitic stainless steel
Acciai inossidabili martensitici temprati
Gehärtete martensitische Edelstähle
Aciers inoxydables martensitiques trempés
Aceros inoxidables martensíticos templados
Закаленные мартенситные нержавеющие стали
50-56 HRC
H5
Hardened white cast iron
Ghise bianche temprate
Gehärteter Weißguss
Fonte blanche trempée
Fundición blanca templada
Закаленный белый чугун
48-55 HRC
Workpiece materials
Materiali Werkstoffmaterialien Matériaux Materiales Материалы
18
TYPHOON
PU-HPU
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
INFO
MATERIALS TRADE MARK AISI-ASTM W.-Nr DIN BS
P1
< 500 N/mm²
Free cutting steel and structural steel
Acciai automatici e acciai strutturali
Automatenstähle und Baustähle
Aciers pour décolletage et aciers structurels
Aceros de fácil mecanización y aceros de
construcción
Автоматные и конструкционные стали
AVP 1213 1.0715 9 SMn 28 230 M 07
12 L 13 1.0718 9 SMnPb 28
1108 1.0721 10 S 20 210 M 15
11 L 08 1.0722 10 SPb 20
1.0723 15 S 20 210 A 15
1140 1.0726 35 S 20 212 M 36
1146 1.0727 46 S 20 212 M 44
AVZ 1215 1.0736 9 SMn 36 240 M 07
12 L 14 1.0737 9 SMnPb 36
1.0037 St 37-2
PR80 A29 1.0765 36 SMnPb 14
A 573 Gr. 58 1.0116 St 37-3 4360-40 C
A 573 Gr. 70 1.0144 St 44-3 N 4360-43 C
1010 1.0301 C 10 045 M 10
1015 1.0401 C 15 080 M 15
1023 1.0402 C 22 050 A 20
1.0570 St 52-3 4360-50 C
1015 1.1141 Ck 15 080 M 15
1025 1.1158 Ck 25 060 A 25
P2
500-700 N/mm²
Carbon steel and low alloy steel
Acciai al carbonio e acciai basso legati
Kohlenstoff-Stähle und niedriglegierte Stähle
Aciers au carbone et aciers faiblement alliés
Aceros al carbono y aceros de baja aleación
Углеродистые и низколегированные стали
1.2162 21 MnCr 5
A 204 Gr. A 1.5415 15 Mo 3 1501-240
4520 1.5423 16 Mo 5 1503-245-420
3310, 9314 1.5752 14 NiCr 14 655 M 13
4320 1.5919 15 CrNi 6 S 107
1.6587 18 CrNiMo 7 6 820 A 16
5115 1.7131 16 MnCr 5 527 M 17
1.7139 16 MnCrS 5
5120 1.7147 20 MnCr 5
5120 H 1.7149 20 MnCrS 5
A 182-F11, F12 1.7335 13 CrMo 4 4 1501-620 Gr. 27
A 387 Gr. 12 Cl. 2 1.7337 16 CrMo 4 4 1501-620 Gr. 27
A 182-F22 1.7380 10 CrMo 9 10 1501-622 Gr. 31
1035 1.0501 C 35 060 A 35
1045 1.0503 C 45 80 M 46
1040 1.0511 C 40 080 M 40
1055 1.0535 St 70-2
1060 1.0601 C 60 080 A 62
1039 1.1157 40 Mn 4 150 M 36
1330 1.1165 30 Mn 5 120 M 36
1335 1.1167 36 Mn 5 150 M 36
1035 1.1181 Ck 35 080 M 36
1045 1.1191 Ck 45 080 M 46
1064 1.1221 Ck 60 080 A 62
1060 1.1740 C 60 W
P3
600-800 N/mm²
Medium alloy steel and heat treated steel
Acciai medio legati e acciai di bonifica
Mittellegierte Stähle und Vergütungsstähle
Aciers moyennement alliés et aciers trempés
et recuits
Aceros de media aleación y aceros bonificados
Среднелегированные и отоженные стали
9255 1.0904 55 Si 7 250 A 53
4142, 4140 1.1201 42 CrMo 4 708 M 40
4142, 4140 1.7225 42 CrMo 4 708 M 40
4135 1.2330 35 CrMo 4 708 A 37
S1 1.2542 45 WCrV 7 BS 1
L6 1.2714 56 NiCrMoV 7 BH 224-5
5045 1.5121 46 MnSi 4
3135 1.5710 36 NiCr 6 640 A 35
3435 1.5736 36 NiCr 10
9840 1.6511 36 CrNiMo 4 816 M 40
4340 1.6582 34 CrNiMo 6 817 M 40
5132 1.7033 34 Cr 4 530 A 32
5140 1.7035 41 Cr 4 530 M 40
4130 1.7218 25 CrMo 4 708 M 25
1.7361 32 CrMo 12 722 M 24
6150 1.8159 50 CrV 4 735 A 50
A 355 Cl. A 1.8509 41 CrAlMo 7 905 M 39
Workpiece materials
Materiali Werkstoffmaterialien Matériaux Materiales Материалы
19
TYPHOON
PU-HPU
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
INFO
SS AFNOR UNE-IHA JIS UNI EN UNS GOST
1912 S 250 11SMn28 SUM 22 CF 9 SMn 28 11 SMn30 G12130
1914 S 250 Pb 11SMnPb28 SUM 22 L CF 9 SMnPb 28 11 SMnPb30 G12134
10 F 1 CF 10 S 20 10 S 20
10 PbF 2 10 SPb 20 CF 10 SPb 20
1922 F.210.F SUM 32 15 SMn13
1957 35 MF 4 F.210.G 35 S20 G11400 40
1973 45 MF 4 46 S20 G11460
S 300 12 SMn 35 CF 9 SMn 36 11 SMn37 G12150
1926 S 300 Pb F.2114-12 CF 9 SMnPb 36 11 SMnPb 37 G12144
1311 E 24-2 STKM 12 C Fe 360 B S235JR 16D
Cf 35 SMnPb 10 36SMnPb14
1312, 1313 E 24-3, E 24-4 Fe 360 D FF S235JRG2 18kp
1412, 1414 E 28-3, E 28-4 SM 41 C Fe 430 D FF S275J2G3 St14kP
AF 34 C 10, XC 10 F.110 S 10 C C 10 C 10 G10100 10
1350 AF3 7 C 12, XC 18 F.111 C 15, C 16 G10170 15
1450 C 20 F.112 C 20, C 21 C22+N G10200 20
2172, 2132 E 36-3, E 36-4 SM 50 YA Fe 510 B S355JR 17G1S
1370 XC 15, XC 18 F.1511 S 15 C, S 15 CK C 15, C 16 C 15R G10170 15
XC 25 F.1120 S 25 C C 25 G10250 25
20 NC 5 SCR 420 H
2912 15 D 3 16 Mo3 16 Mo 3 16 Mo 3
SB 450 M 16 Mo 5 G45200
12 NC 15 SNC 815 (H) 14 NiCr 14 G33106 20X2H4A
16 NC 6 16 CrNi 4
18 NCD 6 18 NiCrMo 7 18 NiCrMo 7 6
2511 16 MC 5 F.1516 SCR 415 16 MnCr 5 16 MnCr 5 G51170 12KHN2
16 MnCrS 5 18HG
20 MC 5 SMnC 420 (H) 20 MnCr 5 20 MnCr 5 G51200 20KH
20 MnCrS 5 SMnC 21 H 20 MnCrS 5 20KH
2216 15 CD 3.5 14 CrMo 4 5 13 CrMo 4 5 12KHM
2216 15 CD 4.5 14 CrMo 4 5
2218 10 CD 9.10 12 CrMo 9 10 10 CrMo 9 10 J21890 12KH8
1550 AF 55 C 35 F.113 C 35 C35+N G10350 35
1650 AF 65 C 45 F.114 S 45 C C 45 E 335 G10430 45
AF 60 C 40 F.114.A S 40 C C 40 C40+N 40
1655 A 70-2 Fe 690 E 360 55
CC 55 C 60 C60+N G10600 60
35 M 5 G10390 40G
SMn 1 H, SCMn 2 G 28 Mn6 G13300 30G2
2120 40 M 5 F.411 SMn 438 (H), SCMn 3 G 28 Mn6+QT G13350 35G2
1572 XC 38 H1 F.1130 S 35 C C 35 C 35E G10340 35
1672 XC 42 F.1140 S 45 C C 45 C 45E G10420 45
1665, 1678 XC 60 F.1150 S 58 C C 60 C 60E G10640 60
Y3 55 SK 7 60
2085, 2090 55 S 7 55 Si 8 55 SiCr7 55S2
2244 42 CD 4 SCM 440 (H) 42 CrMo 4 42 CrMo 4 G41400 38HM
2244 42 CD 4 F.1252 SCM 440 (H) 42 CrMo 4 42 CrMo 4 G41400 38HM
2234 34 CD 4 F.1250 35 CrMo 4 T51620 35KHM
2710 45 WCrV 8 KU T41901 5KHV2S
SKT 4 56 NiCrMoV7-KU T61206 5KHNV
35 NC 6 SNC 236
35 NC 11 SNC 631 (H) 35 NiCr 9
40 NCD 3 38 NiCrMo 4 (KB) 36CrNiMo4+TA G98400
2541 35 NCD 6 F.1280 SNCM 447 35 NiCrMo 6 (KW) 34 CrNiMo 6 38H2N2MA
32 C 4 35Cr4 SCr 430 (H) 34 Cr 4 (KB) 34 Cr 4 G51320 35KH
42 C 4 42 Cr 4 SCr 440 (H) 41 Cr 4 41 Cr 4 G51400 40H
2225 25 CD 4 S F.1251/55Cr3 SCM 425 25 CrMo 4 (KB) 25 CrMo 4 G41300 20KHM
2240 30 CD 12 F.124.A 32 CrMo 12
2230 50 CV 4 F.143 SUP 10 51 CrV 4 50 CrV 4 H61500 50KHFA
2940 40 CAD 6.12 F.1740 SACM 645 41 CrAlMo 7 41 CrAlMo 7 10 K24065
Workpiece materials
Materiali Werkstoffmaterialien Matériaux Materiales Материалы
20
TYPHOON
PU-HPU
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
INFO
MATERIALS TRADE MARK AISI-ASTM W.-Nr DIN BS
P4
800-1000 N/mm²
High alloy steel
Acciai alto legati
Hochlegierte Stähle
Aciers fortement alliés
Aceros de alta aleación
Высоколегированные стали
1070 1.1231 Ck 67 060 A 67
1095 1.1274 Ck 101 060 A 96
W1 1.1545 C 105 W1
1.1645 C 105 W2
W1 1.1663 C 125 W
L2 1.2210 115 CrV 3
O1 1.2510 100 MnCrW 4 BO 1
K720 O2 1.2842 90 MnCrV 8 BO 2
HARDOX HiTuf
52100 1.3505 100 Cr 6 534 A 99
TOOLOX 33
P5
900-1200 N/mm²
Tool steel
Acciai per utensili
Werkzeugstähle
Aciers pour outils
Aceros para herramientas
Инструментальные стали
K100 D3 1.2080 X 210 Cr 12 BD 3
M310 1.2083 X 42 Cr 13
M201 1.2311 40 CrMnMo 7
M200-HOLDAX 1.2312 40 CrMnMoS 86
1.2316 X 36 CrMo 17
W300 H11 1.2343 X 38 CrMoV 5 1 BH 11
W302 H13 1.2344 X 40 CrMoV 5 1 BH 13
A2 1.2363 X 100 CrMoV 5 1 BA 2
W320 H10 1.2365 X 32 CrMoV 3 3 BH 10
K110 1.2379 X 155 CrVMo 12 1
1.2436 X 210 CrW 12
1.2601 X 165 CrMoV 12
L6 1.2713 55 NiCrMoV 6
W500 1.2714 56 NiCrMoV 7
M238 1.2738 40 CrMnNiMo8 6 4
M35 1.3243 S 6-5-2-5
M42 1.3247 S 2-10-1-8 BM 42
T4 1.3255 S 18-1-2-5 BT 4
S600 M2 1.3343 S 6-5-2 BM 2
M7 1.3348 S 2-9-2
TOOLOX 40
T1 1.3355 S 18-0-1 BT 1
VANADIS 4
VANADIS 10
P6
1200-1600 N/mm²
High tensile strength steel
Acciai ad alta resistenza
HSLA-Stähle
Aciers haute résistance
Aceros de alta resistencia
Высокопрочная сталь
TOOLOX 44
HARDOX 400
HARDOX 450
HARDOX 500
WELDOX 1100
CREUSABRO DUAL
CREUSABRO 8000
W720 1.6358 X 2 NiCrMo 18 9 5
MARAGING 1.2706 X 3 NiCrMo 18 8 5
Workpiece materials
Materiali Werkstoffmaterialien Matériaux Materiales Материалы
21
TYPHOON
PU-HPU
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
INFO
SS AFNOR UNE-IHA JIS UNI EN UNS GOST
1770 XC 68 F.5103 C 70 C 67S G10700 70
1870 F.5117 SUP 4 C 100S G10950
1880 Y1 105 F.5118 C 100 KU C 105U U10A
Y1 105 SK 3 C 100 KU U10
Y2 120 SK 2 C 120 KU U13
100 C 3 107 CrV 3 KU 107 CrV 3 T61202 11KHF
2140 90 MWCV 5 F.5220 SKS 3 95 MnWCr 5 KU T31501 9KHVG
90 MV 8 90 MnVCr 8 KU 90 MnCrV 8 T31502 9G2F
2258 100 C 6 F.131 SUJ 2 100 Cr 6 100 Cr 6 G51986 SHKH15
Z 200 C 12 F.5212 SKD 1 X 210 Cr 13 KU X 210 Cr 12 T30403 KH12
X 41 Cr 13 KU
F.5263
X210CrW12
X 38 CrMo 16 1 KU
Z 38 CDV 5 SKD 6 X 37 CrMoV 5 1 KU T20811 4KH5MFS
2242 Z 40 CDV 5 F.5318 SKD 61 X 40 CrMo 5 1 1 KU X 40 CrMoV 5 1 T20813 4KH5MF1S
2260 Z 100 CDV 5 F.5227 SKD 12 X 100 CrMoV 5 1 KU X 100 CrMoV 5 T30102 9KH5VF
32 DCV 28 SKD 7 30 CrMoV 12 27 KU T20810 3KH3M3F
F.520.A X 155 CrMo 12 KU
2312 F.5213 SKD 2 X 215 CrW 12 1 KU KH12
2310 F.5211 X 165 CrMoW 12 KU KH12MF
55 NCDV 7 F.520.S SKT 4 T61206 5KHNM
56 NiCrMoV 7 KU
2723
Z 85 WDKCV 06-05-05-04-02
F.5613 SKH 55 HS 6-5-2-5 HS 6-5-2-5 R6M5K5
Z 110 DKCWV 09-08-04
SKH 51 HS 2-9-1-8 HS 2-10-1-8 T11342 R2AM9K5
Z 80 WKCV 18-05-04-01
SKH 3 HS 18-1-1-5 HS 18-1-2-5 T12004 R18K5F2
2722
Z 85 WDCV 06-05-04-02
F.5603 SKH 9, SKH 51 HS 6-5-2 HS 6-5-2 T11302 R6M5
2782
Z 100 DCWV 09-04-02-02
SKH 58 HS 2-9-2 HS 2-9-2 T11307
Z 80 WCV 18-04-01 SKH 2 HS 18-0-1 HS 18-0-1 T12001 R18
K93120
Workpiece materials
Materiali Werkstoffmaterialien Matériaux Materiales Материалы
22
TYPHOON
PU-HPU
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
INFO
MATERIALS TRADE MARK AISI-ASTM W.-Nr DIN BS
M1
400-700 N/mm²
Ferritic stainless steel
Acciai inossidabili ferritici
Ferritische Edelstähle
Aciers inoxydables ferritiques
Aceros inoxidables ferríticos
Ферритные нержавеющие стали
405 1.4002 X 6 CrAl 13 405 S 17
430 1.4016 X 6 Cr 17 430 S 15
430 F 1.4104 X 12 CrMoS 17
434 1.4113 X 6 CrMo 17 434 S 17
CA-6NM 1.4313 X 5 CrNi 13 4 425 C 11
430 Ti 1.4510 X 6 CrTi 17
409 1.4512 X 5 CrTi 12 409 S 17
446 1.4749 X 18 CrN 28
M2
500-750 N/mm²
Austenitic stainless steel (good machinability)
Acciai inossidabili austenitici - buona
lavorabilità
Austenitische Edelstähle - gute
Verarbeitbarkeit
Aciers inoxydables austénitiques - bonne
usinabilité
Aceros inoxidables austeníticos - fácil
mecanización
Аустенитные нержавеющие стали (хорошая
обрабатываемость)
303 1.4305 X 10 CrNiS 18 9 303 S 31
302 1.4300 X 12 CrNi 18 8 302 S 25
304, 304 H 1.4301 X 6 CrNi 18 10 304 S 31
305 1.4303 X5 CrNi 18 12 305 S 19
304 L 1.4306 X 2 CrNi 19 11 304 S 12
301 1.4310 X 12 CrNi 17 7 301 S 21
304 1.4350 X5 CrNi 18 9 304 S 31
347 1.4550 X 6 CrNiNb 18 10 347 S 31
304 LN 1.4311 X 2 CrNiN 19 11 304 S 62
M3
550-850 N/mm²
Austenitic stainless steel (medium
machinability)
Acciai inossidabili austenitici - media
lavorabilità
Austenitische Edelstähle - mittlere
Verarbeitbarkeit
Aciers inoxydables austénitiques - moyenne
usinabilité
Aceros inoxidables austeníticos -
maquinabilidad media
Аустенитные нержавеющие стали (средняя
обрабатываемость)
310 S 1.4335 X 12 CrNi 25 21 310 S 24
316 1.4401 X 5 CrNiMo 17 12 2 316 S 31
316 LN 1.4429 X 2 CrNiMoN 17 13 3 316 S 62
316 L 1.4435 X 2 CrNiMo 18 14 3 316 S 12
317 L 1.4438 X2 CrNiMo 18 16 317 S 12
329 1.4460 X 4 CrNiMo 27 5 2
DUPLEX F 51-329 A 1.4462 X 2 CrNiMoN 22 5 332 S 15
317 1.4466 X 5 CrNi 18 15 317 S 16
321 1.4541 X10 CrNiTi 18 9 321 S 12
347 1.4550 X10 CrNiNb 18 9 347 S 17
316 Ti 1.4571 X10 CrNiMoTi 18 10 320 S 17
309 1.4828 X15 CrNiSi 20 12 309 S 24
330 1.4864 X12 NiCrSi 36 16
253 MA 1.4893
X 9 CrNiSiNCe 21 11 2
310 S 31
3RE60 1.4417 X 2 CrNiMoSi 19 5
M4
650-950 N/mm²
Martensitic stainless steel
Acciai inossidabili martensitici
Martensitische Edelstähle
Aciers inoxydables martensitiques
Aceros inoxidables martensíticos
Мартенситные нержавеющие стали
403 1.4000 X 6 Cr 13 403 S 17
416 1.4005 X 12 CrS 13 416 S 21
410, CA-15 1.4006 X 10 Cr 13 410 S 21
420 1.4021 X 20 Cr 13 420 S 37
420F 1.4028 X 30 Cr 13 420 S 45
420 1.4031 X 40 Cr 13 420 S 45
431 1.4057 X 20 CrNi 17 2
440 A 1.4109 X 65 CrMo 14
440 B 1.4112 X 90 CrMoV 18 409 S 19
440 C 1.4125 X 105 CrMo 17
SUPER DUPLEX F 53-329 S1 1.4410 X 2 CrNiMoN 25 7 4
SUPER DUPLEX F 55-329 S 1.4501
X 2 CrNiMoCuWN 15 7 4
904L 1.4539
X 2 NiCrMoCu 25 20 5
904 S 13
329 A
254 SMO 1.4529 X 1 CrNiMoN 20 18 7
PH13-8Mo XM-13 1.4534 X 3 CrNiMoAl 13 8 2
654 SMO 1.4652 X 2 CrNiMoN 25 22 7
Alloy 800 1.4876 X 10 NiCrAlTi 32 20
M5
800-1250 N/mm²
PH stainless steel
Acciai inossidabili PH - indurenti per
precipitazione
Ausscheidungshärtbare Edelstähle
Aciers inoxydables à durcissement par
précipitation
Aceros inoxidables PH
Нержавеющие стали PH
15-5-PH XM-12 1.4540 X 4 CrNiCuNb 16 4
17-4-PH 630 1.4542 X 5 CrNiNb 16 4
17-7-PH 631 1.4568 X 7 CrNiAl 17 7 301 S 81
A286 660 1.4943 X 4 NiCrTi 25 15 HR 51
Workpiece materials
Materiali Werkstoffmaterialien Matériaux Materiales Материалы
23
TYPHOON
PU-HPU
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
INFO
SS AFNOR UNE-IHA JIS UNI EN UNS GOST
Z 8 CA 12 F.3111 SUS 405 X 6 CrAl 13
2320 Z 8 C 17 F.3113 SUS 430 X 8 Cr 17 X 6 Cr 17 S43000 12KH17
2383 Z 10 CF 17 F.3117 SUS 430 F X 10 CrS 17
2325 Z 8 CD 17.01 SUS 434 X 8 CrMo 17
2385 Z 5 CN 13.4 SCS 5 X 6 CrNi 13 04 X 3 CrNIMo 13 3 J91540
Z 4 CT 17 SUS 430 LX X 6 CrTi 17
Z 6 CT 12 SUH 409 X 5 CrTi 12
2322 Z 18 C 25 X 18 CrN 28 S44600 15KH28
2346 Z 10 CNF 18.09 F.3508 SUS 303 X 10 CrNi 18 09 X 10 CrNiS 18 9 S30300 12KH19N9
2331 Z 12 CN 18 SUS 302 X 12 CrNi 18 8 S30200 12KH18N9
2333 Z 6 CN 18.09 F.3551 SUS 304 X 5 CrNi 18 11 X 5 CrNi 18 9 S30400 08KH18N10
Z 8 CN 18.12 SUS 305 X 8 CrNi 19 10
2352 Z 2 CN 18.10 F.3503 SUS 304 L X 3 Cr Ni 18 11 X 2 CrNi 19 11 S30403 03KH18N11
(2331) Z 12 CN 17.07 F.3517 SUS 301 X 12 CrNi 17 07 X 9 CrNi 18 8 S30100 07KH16N6
2333 Z 6 CN 18.09 F.3551 SUS 304 X 5 CrNi 18 10
2338 Z 6 CNNb 18.10 SUS 347 X 6 CrNiNb 18 11 X 6 CrNiNb 18 10 S34700 08KH18N12B
2371 Z 2 CN 18 .10 Az SUS 304 LN X 2 CrNiN 18 11 X 2 CrNiN 18 10 S30453 03KH18N11
2361 Z 12 CN 25.20 SUH 310, SUS 310 S X 6 CrNi 26 20 X 12 CrNi 25 21 S31008 12KH25N20
2347 Z 3 CND 17.11.1 F.3543 SUS 316 X 5 CrNiMo 17 12 X 5 CrNiMo 17 12 2 S31600 08KH17H13M2T
2375 Z 2 CND 17.13 Az SUS 316 LN X 2 CrNiMoN 17 13 3 X 2 CrNiMoN 17 13 3 S31653 03KH16N15M3
2353 Z 2 CND 17.13 SCS 16, SUS 316 L X 2 CrNiMo 17 13 2 X 2 CrNiMo 18 14 3 S31603 03KH17N14M3
2367 Z 2 CND 19.15 SUS 317 L X2CrNiMo18 16
2324 Z 3 CND 25.7 Az F.3309 SUS 329 J 1 X 3 CrNiMo 27 5 2 X 3 CrNiMo 27 5 2 S32900
2377 Z 2 CND 22.05 Az X 2 CrNiMoN 22 5 X 2 CrNiMoN 22 5 3 S31803
2366 SUS 317 X 5 CrNi 18 15 X 3 CrNiMo 18 12 3 S31700 08KH17H15M3T
2337 Z 6 CND 18.10 F.3553 SUS 321 X6CrNiTi18 11
2338 Z 6 CNNb 18.10 F.3552 SUS 347 X6CrNiNb18 11
2350 Z 6 CNDT 17.12 F.3535 — X6CrNiMoTi 17 12
Z 15 CN 24.13 SUS 309 X16 CrNi 24 14
Z 12 NCS 35.16 SUH 330
2368
X 9 CrNiSiNCe 21 11 2
S30815
2376 Z 2 CND 18.05.03 X 2 CrNiMoSi 19 5 S31500
2301 Z 6 C 12 F.3110 SUS 403 X 6 Cr 13 X 6 Cr 13 S41008 08KH13
Z 11 CF 13 F.3411 SUS 416 X 12 CrS 13
2302 Z 10 C 13 F.3401 SUS 410 X 12 Cr 13 X 12 Cr 13 S41000 12KH13, 08KH13
2303 Z 20 C 13 F.3402 SUS 420 J1 X 20 Cr 13 X 20 Cr 13 S42000 20KH13
2304 Z 30 C 13 F.3403 SUS 420 J2 X 30 Cr 13
2304 Z 40 C 14 F.3404 SUS 420 X 40 Cr 14 X 39 Cr 13 S40280 40KH13
2321 Z 15 CNi 16.02 F.3427 SUS 431 X 16 CrNi 16
Z 70 D 14 SUS 440 A X 70 CrMo 15 S44002
2327 Z 2 CND 18 05 SUS 440 B X CrTi 12 X 90 CrMoV 18 S44003 95KH18
Z 100 CD 17 SUS 440 C X 105 CrMo 17 X 105 CrMo 17 S44004 95KH18
2328 Z 3 CND 25.07 Az X 2 CrNiMoN 25 7 4 X 2 CrNiMoN 25 7 4 S32750
X 2 CrNiMoCuWN 15 7 4
S32760
2562 Z 2 NCDU 25 20
X 2 NiCrMoCu 25 20 5
N08904
2778
Z 1 CNDU 20.18.05 Az
X 1 CrNiMoN 20 18 7 X 1 CrNiMoN 20 18 7 S31254
X 6 NiCrTiMoV 25 15 S13800
X 1 CrNiMoN 25 22 8 S32654
Z 10 NC 32.21 NCF 800 X 10 NiCrAlTi 32 20 N08800
Z 4 CNUNb 16.4 M S15500
SUS 630
2388 Z 9 CAN 17.7 SUS 631 X 7 CrNiAl 17 7 X 3 CrNiMoAl 13 8 2 S17700 09KH17N7YU1
2570 Z 6 NCTDV 25.15 SUH 660 X 5 CrNiCuNb 16 4 S66286
Workpiece materials
Materiali Werkstoffmaterialien Matériaux Materiales Материалы
24
TYPHOON
PU-HPU
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
INFO
MATERIALS TRADE MARK AISI-ASTM W.-Nr DIN BS
K1
150-250 HB
Grey cast iron
Ghise grigie
Grauguss
Fonte grise
Fundición gris
Серый чугун
A48-20B 0.6010 GG-10 Grade 100
A48 25 B 0.6015 GG-15 Grade 150
A48 30 B 0.6020 GG-20 Grade 220
G 3500 GG-220 HB
A48 35 B 0.6025 GG-25 Grade 260
A48 45 B 0.6030 GG-30 Grade 300
A48 50 B 0.6035 GG-35 Grade 350
A48-60B 0.6040 GG-40 Grade 400
K2
150-350 HB
Nodular cast iron
Ghise sferoidali
Sphäroguss
Fonte nodulaire
Fundición nodular
Чугун с шаровидным графитом
Grade 350 GJV-300
Grade 400 GJV-350
Grade 400-15 GJV-400
Grade 450 GJV-450
Grade 500 GJV-500
0.7033 GGG-35.3 Grade 350/22
60-40-18 0.7040 GGG-40 Grade 420/12
60-40-18 0.7043 GGG-40.3 Grade 370/17
A536 80-55-6 0.7050 GGG-50 Grade 500/7
A476 80-60-03 0.7060 GGG-60 Grade 600/3
A536 100-70-03 0.7070 GGG-70 Grade 700/2
K3
120-260 HB
Austenitic cast iron
Ghise austenitiche
Austenitischer Guss
Fonte austénitique
Fundición austenítica
Аустенитный чугун
(Tempered) A220 60004 GTS-55-04 P 540/5
Ni-Resist 2 A436 Type 2 0.6660 GGL-NiCr 20 2 Grade F2
Ni-Resist 3 A436 Type 3 0.6676 GGL-NiCr 30 3 Grade F3
Ni-Resist 1 A436 Type 1 0.6655 GGL-NiCuCr 15 6 2 Grade F1
Ni-Resist D-5 A439 Type D-5 0.7683 GGG-Ni 35
Ni-Resist D-2 A436 Type D-2 0.7660 GGG-NiCr 20 2 Grade S2
Ni-Resist D-3 A436 Type D-3 0.7676 GGG-NiCr 30 3 Grade S3
Nodumag — 0.7652 GGG-NiMn 13 7 Grade S6
Ni-Resist D-2M A439 Type D-2M 0.7673 GGG-NiMn 23 4 Grade S2M
K4
250-500 HB
ADI cast iron
Ghise ADI
ADI Guss
Fonte ADI
Fundición ADI
Отпущенный ковкий чугун
ADI 800 850/550/10 GJS-800-8
ADI 1000 1050/700/7 GJS-1000-5
ADI 1200 1200/850/4 GJS-1200-2
ADI 1400 1400/1100/1 GJS-1400-1
ADI 1600 1600/1300/- GJS-1600-1
Workpiece materials
Materiali Werkstoffmaterialien Matériaux Materiales Материалы
25
TYPHOON
PU-HPU
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
INFO
SS AFNOR UNE-IHA JIS UNI EN UNS GOST
01 10-00 FC 100 G 10 Sc 10
01 15-00 Ft 15 D FG 15 FC 150 G15 EN-GJL-150 F11601 Sc 15
01 20-00 Ft 20 D FG 20 FC 200 G20 EN-GJL-200 F12101 Sc 20
02 19-00 EN-GJL-215
01 25-00 Ft 25 D FG 25 FC 250 G25 EN-GJL-250 F12401 Sc 25
01 30-00 Ft 30 D FG 30 FC 300 G30 EN-GJL-300 F13101 Sc 30
01 35-00 Ft 35 D FG 35 FC 350 G35 EN-GJL-350 F13502 Sc 35
0140-00 Ft 40 D FC 40
EN-GJV-300
EN-GJV-350
EN-GJV-400
EN-GJV-450
EN-GJV-500
07 17-15 FGS 370-17 FCD 350-22L EN-GJS-350-22
07 17-02 FGS 400-12 FGE 38-17 FCD 400-18L GS 400-12 EN-GJS-400-15 F32800 Vc 42-12
07 17-12 FGS-370-17 GSO 42/17 EN-GJS-400-18 F32800 Vc 42-12
07 27-02 FGS 500-7 FGE 50-7 FCD 500-7 GS 500-7 EN-GJS-500-7 F33800 Vc 50-2
07 32-03 FGS 600-3 FGE 60-2 FCD 600-3 GS 600-3 EN-GJS-600-3 F34100 Vc 60-2
07 37-01 FGS 700-2 FGS 70-2 FCD 700-2 GS 700-2 EN-GJS-700-2 F34800 Vc 70-2
08 54-00 P 540/5 PCMP55-04 P 55-04 EN-GJMB-550-4 F24130
05 23-00 FGL Ni20 Cr2 EN-GJLA-XNiCr 20-2 F41002
FGL Ni30 Cr3 EN-GJLA-XNiCr 30-3 F41004
FGL Ni15 Cu6 Cr2
EN-GJLA-XNiCuCr15-6-2
F41000
FGS Ni35 EN-GJSA-XNi35 F43006
FGS Ni20 Cr2 EN-GJSA-XNiCr20-2 F43000
FGS Ni30 Cr3 EN-GJSA-XNiCr30-3 F43003
07 72-00 FGS Ni13 Mn7 EN-GJSA-XNiMn13-7 —
FGS Ni23 Mn4 EN-GJSA-XNiMn23-4 F43010
EN-GJS-800-8 ADI grade 1
EN-GJS-1000-5 ADI grade 2
EN-GJS-1200-2 ADI grade 3
EN-GJS-1400-1 ADI grade 4
EN-GJS-1600-1 ADI grade 5
Workpiece materials
Materiali Werkstoffmaterialien Matériaux Materiales Материалы
26
TYPHOON
PU-HPU
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
INFO
MATERIALS TRADE MARK AISI-ASTM W.-Nr DIN BS
N1
Aluminium alloys ≤ 12% Si
Leghe di alluminio ≤ 12% Si
Aluminiumlegierungen ≤ 12% Si
Alliages d'aluminium ≤ 12 % Si
Aleación de aluminio ≤ 12% Si
Алюминиевое литье ≤ 12% Si
A1200 3.0205 Al 99 1C
A1050/1050A 3.0255 Al 99.5 1B
1070/1070A 3.0275 Al 99.7
1080/1080A 3.0285 Al 99.8 1A
3.0515 AlMn1 N3
Aluman 100 3.0517 AlMn1Cu
3105 3.0505 AlMn0.5Mg0.5 N31
3005 3.0525 ALMn1Mg0.5
3004 3.0526 AlMn1Mg1
6012 3.0615 AlMgSiPb
Avional 660 2014/2014A 3.1255 AlCuSiMn H15
Avional 050 2117 3.1305 AlCuMg0.5 L86
Avional 100 2017/2017A 3.1325 AlCuMg 1 (H14)
Avional 150 2024 3.1355 AlCuMg 2 DTD5090
—2030 3.1645 AlCuMgPb —
Recidal 11 2011 3.1655 AlCuBiPb FC1
A380 3.2161 G-AlSi8Cu3
B26 3.2341 G-AlSi5Mg LM25
Anticorodal 063 3.3206 AlMgSi0.5 (H9)
3.3210 AlMgSi0.7 (H10)
Anticorodal 061 6061 3.3211 AlMg1SiCu H20
Peraluman 080 3.3315 AlMg1 N41
Peraluman 150 5050 3.3316 AlMg1.5
Peraluman 250 5052 3.3523 AlMg2.5
5251 3.3525 AlMg2Mn0.3 N4
Peraluman 350 5154 3.3535 ALMg3 N5/N56
5454 3.3537 AlMg2.7Mn N51
Peraluman 440 5083 3.3547 AlMg4.5Mn N8
Peraluman 500 5056 3.3555 ALMg5 N6
Anticorodal 061 6061 3.3211 AlMg1SiCu H20
Anticorodal 100 6082 3.2315 AlMgSi 1 H30
Aldrey 051 6101 EAlMgSi0.5 E91E
6106 AlMgSiMn
6463
6262
7010 AlZn6MgCu DTD5130
7020 3.4335 AlZn4.5Mg1 H17
Ergal 55 7075 3.4365 AlZnMgCu1.5 2L95
Workpiece materials
Materiali Werkstoffmaterialien Matériaux Materiales Материалы
27
TYPHOON
PU-HPU
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
INFO
SS AFNOR UNE-IHA JIS UNI EN UNS GOST
4010 A4 L-3001 A1×3 9001/1
4007 A5 A1×1 9001/2 AW-1050A AA1050A
A7
A8
4054 L-3811 AW-3103 AA3103
A-M1/3003 A3003 AW-3003 AA3003
AMG0.5 9003/4
AM1G L-3820 9003/2
ASGPB
4338 A-U4SG/2014 L-3130 9002/3 AW-2014 AA2014
AU2G 9002/1
AU4G L-3120 A3×2 9002/2
AU4G1 L-3140 A3×4 9002/4
4335 AU4Pb L-3121 — 9002/8
4355 A-U5PbBi/2011 L-3192 A2011 9002/5 AW-2011 AA2011
4251 AC-46200 A13800
4244 A-S7G AC 4C 3599 AC-42000
4103 A-GS/6060 L-3441 9006/1 AW-6060 AA6060
4104,4107 A-GSUC/6061 L-3454 (A6063) AW-6063 AA6005
AGSUC L-3420 A2×4 9006/2
4106 A-G0.6 L-3350 9005/1 AW-5005 AA5005
9005/7
4120 AG2.5C L-3360 A2×1 9005/2
AG2M L-3361
AG3 9005/8
AG2.5MC L-3391 A2×9 9005/3
4140 AG4.5MC L-3321 A2×7 9005/5
A-G5
AGSUC A2×4 9006/2
4212 ASGM 0.7 L-3451 — 9006/4
AGS/L
9007/4
4425 AZ5G L-3741 — 9007/1 AW-7020 AA7020
AZ5GU L-3710 A34×6 9007/2 AW-7075 AA7075
Workpiece materials
Materiali Werkstoffmaterialien Matériaux Materiales Материалы
28
TYPHOON
PU-HPU
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
INFO
MATERIALS TRADE MARK AISI-ASTM W.-Nr DIN BS
N2
Aluminium alloys > 12% Si
Leghe di alluminio > 12% Si
Aluminiumlegierungen > 12% Si
Alliages d'aluminium > 12 % Si
Aleación de aluminio > 12% Si
Алюминиевое литье > 12% Si
AMS 4442 3.5103 G-MgSe3Zn2Zr1 MAG6-TE
G-AlSi2
G-AlSi4.5 DTD716A
355.1 G-AlSi5 LM16
A356 3.2371 G-AlSi7Mg LM25
A380 G-AlSi8Cu3 LM24
3.2373 G-AlSi9Mg
A360 3.2381 G-AlSi10Mg LM9
3.2383 G-AlSi10Mg (Cu) (LM9)
A413.0 3.2582 GD-AlSi12
A413.1 3.2583 G-AlSi12(Cu) LM20
A413.2 3.2581 G-AlSi12 LM6
3.3561 G-AlMg5 LM5
319 G-AlSi6Cu4 LM21
319.2 G-AlSi6Cu4 LM4
— LM2
319.2 G-AlSi6Cu4 LM22
204 AEA 24860
LM28
336.0 LM13
3.5812 G-MgAl8Zn1 MAG1
3.5312 G-MgAl3Zn —
3.5912 G-MgAl9Zn1 MAG7
3.5101 G-MgZn4SE1Zr1 MAG5
3.5102 G-MgZn5Th2Zr1
3.5106 G-MgAg3SE2Zr1 MAG 12
AZ61A 3.5612 G-MgAl6Zn MAG-E-121
AZ80A 3.5812 G-MgAl8Zn
3.2315 AlMgSi1 H30
B85 3.2381 G-AlSi10Mg LM9
A413.2 3.2382 GD-AlSi12
B390.0
Workpiece materials
Materiali Werkstoffmaterialien Matériaux Materiales Материалы
29
TYPHOON
PU-HPU
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
INFO
SS AFNOR UNE-IHA JIS UNI EN UNS GOST
ZRE1 MN65120 M12330
41000 —
AS4G ALSi5Mg
AS4GU 45300 ALSi5Cu 1
4244 A-S7G AC4C 42000 AlSi7Mg
4250 A-S9U3 AC4B 46500 Al Si9 Cu3 (Fe) (Zn)
4253 A-S10G 43100 Al Si 10 Mg
43200
4247
4260 A-S12 47000 Al Si 12 (Cu)
4261 A-S12U AC3A 44100 Al Si 12
4252 A-SU12 AC4A 51300 ALMg 6
A-S5UZ AC2A 45000 Al Si 6 Cu 4
A-S5U3 AC2A 45200 Al Si 5 Cu 3 Mn
ADC12
A-S5U AC2A 45400 Al Si 5 Cu 3
A-U5GT AC1B 2100 Al Cu 4 Mg Ti
AlSi18Cu1Mg1Ni1
A-S12UN AC8A AlSi12Cu1Mg1Ni1
G-A9
G-A9Z1
G-Z4TR
G-Ag22.5
G-A6-Z1 MG-P-63 M11600
(G-A7-Z1) MG-P-61
4212 A-SGM0.7/6082 AW-6082 AA6082
4253 A-S10G AC-43400 A13600
AC-44200
ADC14
Workpiece materials
Materiali Werkstoffmaterialien Matériaux Materiales Материалы
30
TYPHOON
PU-HPU
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
INFO
MATERIALS TRADE MARK AISI-ASTM W.-Nr DIN BS
N3
Copper
Rame
Kupfer
Cuivre
Cobre
Медные сплавы
2.0060 E-Cu57 C101
2.0065 E-Cu58 —
2.0070 SE Cu —
— C102
——
2.0090 SF Cu C106
— C104
— C110
— C105
2.0040 OF Cu C103
CA952 2.0940-01 CuAl10Fe AB1
CA955 2.0975-01 CuAl10Ni AB2
2.0872 CuNi10Fe1Mn CN102
CuNi10Zn45
2.0790 CuNi18Zn19Pb
CA937 2.1176 CuPb10Sn LB2
2.1050-01 CuSn10 CT1
2.1087 CuSn10Zn
2.0240 CuZn15 CZ102
2.0321 CuZn37 CZ108
2.0530 CuZn38Sn1
2.0401 CuZn39Pb3 CZ121
2.0402 CuZn40Pb2 CZ120
2.1202 SB Cu C107
2.1356 Cu Mn 3 —
2.1522 Cu Si2 Mn —
— C108
— CC101
— CC102
— CC102
2.0857 — —
— CB101
— C112
——
——
— CS101
— C109
— C111
Workpiece materials
Materiali Werkstoffmaterialien Matériaux Materiales Материалы
31
TYPHOON
PU-HPU
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
INFO
SS AFNOR UNE-IHA JIS UNI EN UNS GOST
— Cu/a1 C1100 E-Cu57 CW004A C11000
—— ————
— — — — CW021A C10300
— — — — CW005A C11020
— — — — CW023A C12000
— Cu/b C1220 — CW024A C12200
— — — — CW006A C12500
— — — — CW009A C10100
—— ————
— Cu/c1 C1020 — CW008A C10200
5710 CuAl10Fe CC331G C95200 BrA9ZH3L
5716 CuAl10Ni5Fe5 CC333G C95500 BrA10ZH4N4L
5667 CuNi10Fe1Mn C70600
CuNi18Zn19Pb1 C76300
5640 CuSn10Pb10 CW352H C93700
5443 CuSn10 CC480K C90700
5458 C90500
5112 CuZn15 C2300 CW502L C23000 L90
5150 CuZn37 CW508L C27200
CW717R C46400 LO60-1
5170 CuZn39Pb3 CW614N C38500
5168 CuZn39Pb2 CW612N C37800
— — — — — C14200
—— ————
—— ————
— — — — — C16200
— — — — CW105C C18200
— — — — CW106C —
— — — — CW111C C70250
— — — — CW112C C70320
— — — — CW101C C17200
— — — — CW104C C17500
— — — — CW120C C15000
— — — — CW115C C65100
— — — — CW116C C65500
— — — — CW118C C14500
— — — — CW114C C14700
Workpiece materials
Materiali Werkstoffmaterialien Matériaux Materiales Материалы
32
TYPHOON
PU-HPU
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
INFO
MATERIALS TRADE MARK AISI-ASTM W.-Nr DIN BS
N4
Bronze and brass
Bronzo e ottone
Bronze und Messing
Bronze et laiton
Bronce y latón
Бронзы и Латуни
C50700 2.1010 CuSn2 —
C51100 2.1016 CuSn4 PB101
C51000 — CUSn5 PB102
C51900 2.1020 CuSn6 PB103
C52100 2.1030 CUSn8 PB104
C54400
CuSn10
CuSn12
2.1020 CuSn6 PB103
AMPCO 18
AMPCO 21
AMPCO 22
2.0220 CuZn5 CZ125
2.0230 CuZn10 Cz101
2.0240 CuZn15 CZ102
2.0250 CuZn20 CZ103
2.0261 CuZn28
2.0265 CuZn30 CZ106
2.0280 CuZn33
2.0335 CuZn36 CZ107
2.0321 CuZn37 CZ108
2.0360 CuZn40 CZ109
2.0331 CuZn36Pb1.5 CZ119
2.0331 CuZn36Pb1.5 CZ119
2.0375 CuZn36Pb3 CZ124
2.0371 CuZn38Pb1.5 CZ128
2.0372 CuZn39Pb0.5 CZ123
CuZn38Pb2
2.0380 CuZn39Pb2 CZ131 / (CZ128)
2.0401 CuZn39Pb3 CZ121
2.0402 CuZn40Pb2 CZ122
2.0410 CuZn44Pb2 CZ130
2.0470 CuZn28Sn1 CZ111
2.0530 CuZn38Sn1
— CuZn19Sn
2.0460 CuZn20Al2 CZ110
2.0561 CuZn40Al1
2.0550 CuZn40Al2
— CuZn20Al2As
2.0572 CuZn40Mn2 CZ136
2.0932 CuAl8Fe3
2.0966 CuAl10Ni5Fe4 CA104
N5
Plastic materials
Materiali plastici
Kunstoffmaterialien
Matériaux plastiques
Materiales plásticos
Пластические материалы
Polycarbonate (PC)
N6
Fiber and composites
Fibre e compositi
Faserwerkstoffe und Verbundwerkstoffe
Fibres et composites
Fibras y compuestos
Композитные материалы
T300
T700
T800
HTA
Epoxy
PPS
PEEK
Epoxy
HX
E-glass
Kevlar
Workpiece materials
Materiali Werkstoffmaterialien Matériaux Materiales Материалы
33
TYPHOON
PU-HPU
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
INFO
SS AFNOR UNE-IHA JIS UNI EN UNS GOST
—
C5111
C5102
C5191
C5212
C5441
5428 CuSn6 C5191 CW452K C51900 BrOF6.5-0.15
C2100 CW500L C21000
C2200 CW501L C22000
C2300 CW502L C23000
C2400 CW503L C24000
CW504L
C2600 CW505L C26000
C2680 CW506L C26800
C2700 CW507L C27000
C2700 CW508L C27200
C2800 CW509L C28000
CW601N C34500
C3501 CW600N C34000
C3601 CW603N C36000
C35300
CW610N C36500
C3771 CW612N C37700
C3603 CW614N C38500
CW617N C38000
C44300
C68700
CW723R
CW303G C61400
CW307G C63000
Workpiece materials
Materiali Werkstoffmaterialien Matériaux Materiales Материалы
34
TYPHOON
PU-HPU
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
INFO
MATERIALS TRADE MARK STRUCTURE
MF*
AISI-ASTM W.-Nr DIN
S1
< 25 HRC
Heat resistant super alloys (HRSA) - good
machinability
Leghe resistenti al calore - buona
lavorabilità
Warmfeste Legierungen - gute
Verarbeitbarkeit
Alliages résistants à la chaleur - bonne
usinabilité
Aleaciones resistentes al calor de fácil
mecanización
Жаропрочные суперсплавы (хорошая
обрабатываемость)
Nickel 201
Nickel based superalloys
4.3
17-4 PH (solubilized)
Iron based superalloys
2.1
AM 350
Iron based superalloys
1.8
Lapelloy
Iron based superalloys
1.8
17-7 (precipitation)
Iron based superalloys
1.8
Hastelloy C (plate)
Nickel based superalloys
1.8 N10002 NiCr17Mo17Few
Hastelloy S
Nickel based superalloys
1.8
Inconel 625 (cast)
Nickel based superalloys
1.7 N06625 2.4856 NiCr22Mo9Nb
A 286 (plate)
Iron based superalloys
1.4
IN 801
Iron based superalloys
1.4
M 308
Iron based superalloys
1.4
Hastelloy B-2
Nickel based superalloys
1.4 2.4617
Hastelloy C (cast)
Nickel based superalloys
1.4 N10002 NiCr17Mo17Few
Hastelloy C-22
Nickel based superalloys
1.4
Hastelloy N (forged)
Nickel based superalloys
1.4 N10003
Inconel 600
Nickel based superalloys
1.4 N06600 2.4816
Inconel 601
Nickel based superalloys
1.4 N06601 2.4851 NiCr23Fe
Inconel 706
Nickel based superalloys
1.4
Inconel X750 (solubilized) Nickel based superalloys
1.4 N07750 2.4669 NiCr 15 Fe 7 TiAl
S2
25-35 HRC
Heat resistant super alloys (HRSA) -
medium machinability
Leghe resistenti al calore - media
lavorabilità
Warmfeste Legierungen - mittlere
Verarbeitbarkeit
Alliages résistants à la chaleur - moyenne
usinabilité
Aleaciones resistentes al calor de media
mecanización
Жаропрочные суперсплавы (средняя
обрабатываемость)
A 286 (lsolubilizzato)
Iron based superalloys
1.3
AM 350 (cast)
Iron based superalloys
1.3
Incoloy 800
Iron based superalloys
1.3 N08800 1.4876 X10NiCrAlTi32-21
Incoloy 825
Iron based superalloys
1.3 N08825 2.4858 NiCr21Mo
Hastelloy C-276
Nickel based superalloys
1.3
Hastelloy C-4
Nickel based superalloys
1.3
Hastelloy D
Nickel based superalloys
1.3
Hastelloy G
Nickel based superalloys
1.3
Hastelloy G-3
Nickel based superalloys
1.3
Hastelloy N (cast)
Nickel based superalloys
1.3 N10003
Hastelloy W
Nickel based superalloys
1.3
Hastelloy X
Nickel based superalloys
1.3 N06002 2.4665 NiCr22FeMo
Inconel 625 (pipe)
Nickel based superalloys
1.3 N06625 2.4856 NiCr22Mo9Nb
Inconel 708 (forged)
Nickel based superalloys
1.3
Nimonic 80
Nickel based superalloys
1.3 N06075 2.4630 NiCr20Ti
Nimonic 105
Nickel based superalloys
1.3
A 286 (precipitation)
Iron based superalloys
1.1
AM 355
Iron based superalloys
1.1
IN 800
Iron based superalloys
1.1
N 155
Iron based superalloys
1.1
15-5 PH
Iron based superalloys
1.1
17-4 PH (lsolubilizzato)
Iron based superalloys
1.1
Incoloy 909
Iron based superalloys
1.1
Stellite 21
Cobalt based superalloys
1.1
Stellite 30
Cobalt based superalloys
1.1
Stellite 31
Cobalt based superalloys
1.1
Inconel 625 (forged)
Nickel based superalloys
1.1 N06625 2.4856 NiCr22Mo9Nb
Inconel 713
Nickel based superalloys
1.1
Inconel 718 (cast)
Nickel based superalloys
1.1 N07718 2.4668 NiCr19Fe19NbMo
Inconel 718 (pipe)
Nickel based superalloys
1.1 N07718 2.4668 NiCr19Fe19NbMo
Inconel 901
Nickel based superalloys
1.1
Nimonic 81
Nickel based superalloys
1.1 N07080 2.4631 NiCr20TiAl
Nimonic 263
Nickel based superalloys
1.1
Waspalloy (cast)
Nickel based superalloys
1.1 N07001 2.4654 NiCr20Co14MoTi
* Machinability Factor based on Inconel 718 (forged) = 1.0
Workpiece materials
Materiali Werkstoffmaterialien Matériaux Materiales Материалы
35
TYPHOON
PU-HPU
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
INFO
BS SS AFNOR UNE-IHA JIS UNI EN UNS GOST
NC17DWY
NC22DNb
NiMo28 N10665
NC17DWY
NC15Fe
HR505 NC19FeNB
3075(NA15)
NC21FeDU
HR6.204 NC22FeD
NC22DNb
HR5.203-4 NC20T
NC22DNb
Hr8 Nc19FeNb
Hr8 Nc19FeNb
HR401,601 NC20TA
NC20K14
Workpiece materials
Materiali Werkstoffmaterialien Matériaux Materiales Материалы
36
TYPHOON
PU-HPU
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
INFO
MATERIALS TRADE MARK STRUCTURE
MF*
AISI-ASTM W.-Nr DIN
S3
35-45 HRC
Heat resistant super alloys (HRSA) - low
machinability
Leghe resistenti al calore - difficile
lavorabilità
Warmfeste Legierungen - schwere
Verarbeitbarkeit
Alliages résistants à la chaleur - faible
usinabilité
Aleaciones resistentes al calor de difícil
mecanización
Жаропрочные суперсплавы (плохая
обрабатываемость)
Cobalt based superalloys
Haynes 188 (pipe) 1.0
Nickel based superalloys
Inconel X750 (precipitation)
1.0 N07750 2.4669 NiCr 15 Fe 7 TiAl
Nickel based superalloys
Inconel 718 (forged) 1.0 N07718 2.4668 NiCr19Fe19NbMo
Nickel based superalloys
Nimonic 115 1.0
Nickel based superalloys
Waspalloy (forged) 1.0 N07001 2.4654 NiCr20Co14MoTi
Cobalt based superalloys
Haynes 25 0.9
Cobalt based superalloys
Haynes 188 (forged) 0.9
Nickel based superalloys
Udimet 500 0.9 NiCr18cCoMoAlTi
Nickel based superalloys
Udimet 700 0.9
NiCo15Cr15MoAlTi
Nickel based superalloys
Nimonic 90 0.7
Nickel based superalloys
Nimonic 91 0.7
Nickel based superalloys
Nimonic 101 0.7
Nickel based superalloys
Mar-M 247 0.7
NiCo10W10Cr9AlTi
Nickel based superalloys
Mar-M 200 0.6
NiW13Co10Cr9AlTi
Cobalt based superalloys
H 531 0.4
Nickel based superalloys
Rene 95 0.4
Cobalt based superalloys
Air Resist 0.3
S4
Low alloy titanium (good
machinability)
Leghe di titanio basso legate e medio
legate
Niedriglegierte und mittellegierte
Titanlegierungen
Alliages de titane faiblement alliés et
moyennement alliés
Aleaciones de titanio
de fácil
mecanización
Низколегированные титановые сплавы
(хорошая обрабатываемость)
Grade 1 265-G1 TiAl2Sn4Zr2MoSi
Grade 2 265-G2 TiAl2Sn4Zr6Mo
Grade 3 (13 HRC) 265-G3 3.7055 Ti 99.6
Grade 9 (15 HRC) 3.7195 Ti3Al2.5V
TiAl7Mo4
3.7115 TiAl5Sn2.5
3.7124 TiCu2.5
3.7155 TiAl6Zr5Mo0.5
— TiAl5Mo4Sn4Si0.5
3.7175 TiAl6V6Sn2
3.7185 TiAl4Mo4Sn2
3.7025 Ti 99.8
3.7035 Ti 99.7a
S5
High alloy titanium (medium
machinability)
Leghe di titanio medio legate e alto
legate
Mittellegierte und hochlegierte
Titanlegierungen
Alliages de titane moyennement alliés
et fortement alliés
Aleaciones de titanio
de media
mecanización
Высоколегированные титановые сплавы
(средняя обрабатываемость)
Grade 4 (23 HRC) 265-G4
Grade 5 (36 HRC) 3.7164 Ti6Al4V
Grade 6 (36 HRC) Ti5Al2.5SN
Grade 23 (35 HRC) 3.7165 Ti6Al4VELI
6242 (34 HRC) 4975 TiAl2Sn4Zr2MoSi
6246 (39 HRC) TiAl2Sn4Zr6Mo
TiV10Fe2Al3
* Machinability Factor based on Inconel 718 (forged) = 1.0
Workpiece materials
Materiali Werkstoffmaterialien Matériaux Materiales Материалы
37
TYPHOON
PU-HPU
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
INFO
BS SS AFNOR UNE-IHA JIS UNI EN UNS GOST
HR505 NC19FeNB
Hr8 Nc19FeNb
NC20K14
NCK19DAT
NCKD20AT
R50250
R50400
R50550
Ti9 R56320
TA14/17 T-A6V
TA 1
TA 2-5
R50700
TA10-13/TA29 T-A5E TiAl6V4 R56400
R54250
TA11 R56401
R56260
Workpiece materials
Materiali Werkstoffmaterialien Matériaux Materiales Материалы
38
TYPHOON
PU-HPU
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
INFO
MATERIALS W.-Nr DIN BS SS AFNOR
H1
50-56 HRC
Hardened steel
Acciai temprati generali
Allgemeine gehärtete Stähle
Aciers trempés
Aceros templados
Закаленные стали
1.7131 16 MnCr 5 527 M 17 2511 16 MC 5
1.1201 42 CrMo 4 708 M40 2244 42 CD 4
1.1231 Ck 67 060 A 67 1770 XC 68
1.1248 Ck 75 060 A 78 1774, 1778 XC 75
1.1274 Ck 101 060 A 96 1870
1.1545 C 105 W1 1880 Y1 105
1.2550 60 WCrV 7 55 WC 20
1.7176 55 Cr 3 527 A 60 2253 55 C 3
1.3401 X 120 Mn 12 BW 10 2183 Z 120 M 12
H2
54-62 HRC
Hardened bearing steel
Acciai temprati per cuscinetti
Gehärtete Kugellagerstähle
Aciers trempés pour roulements
Aceros templados para rodamientos
Закаленные подшипниковые стали
1.2210 115 CrV 3 100 C 3
1.2510 100 MnCrW 4 BO 1 2140 90 MWCV 5
1.2842 90 MnCrV 8 BO 2 90 MV 8
1.3505 100 Cr 6 534 A 99 2258 100 C 6
H3
60-65 HRC
Hardened tool steel
Acciai per utensili temprati
Gehärtete Werkzeugstähle
Aciers trempés pour outils
Aceros templados para herramientas
Закаленные инструментальные стали
1.2344 X 40 CrMoV 5 1 BH 13 2242 Z 40 CDV 5
1.2363 X 100 CrMoV 5 1 BA 2 2260 Z 100 CDV 5
1.2379 X 155 CrVMo 12 1 BD 2 Z 160 CDV 12
1.2436 X 210 CrW 12 2312
1.2601 X 165 CrMoV 12 2310
1.2713 55 NiCrMoV 6 55 NCDV 7
1.3243 S 6-5-2-5 2723
Z 85 WDKCV 06-05-05-04-02
1.3247 S 2-10-1-8 BM 42
Z 110 DKCWV 09-08-04
1.3343 S 6-5-2 BM 2 2722
Z 85 WDCV 06-05-04-0
1.3355 S 18-0-1 BT 1
Z 80 WCV 18-04-01
H4
50-56 HRC
Hardened martensitic stainless steel
Acciai inossidabili martensitici temprati
Gehärtete martensitische Edelstähle
Aciers inoxydables martensitiques trempés
Aceros inoxidables martensíticos templados
Закаленные мартенситные нержавеющие
стали
1.4021 X 20 Cr 13 420 S 37 2303 Z 20 C 13
1.4109 X 65 CrMo 14 Z 70 D 14
1.4112 X 90 CrMoV 18 409 S 19 2327 Z 2 CND 18 05
1.4125 X 105 CrMo 17 Z 100 CD 17
1.4534 X 3 CrNiMoAl 13 8 2
1.4542 X 5 CrNiCuNb 17 4 Z 6 CNU 17.4
1.4568 X 7 CrNiAl 17 7 301 S 81 2388 Z 9 CAN 17.7
1.4943 X 4 NiCrTi 25 15 HR 51 2570 Z 6 NCTDV 25.15
H5
48-55 HRC
Hardened white cast iron
Ghise bianche temprate
Gehärteter Weißguss
Fonte blanche trempée
Fundición blanca templada
Закаленный белый чугун
G-X330 NiCr 4 2 FB Ni4 Cr2 BC Grade 2 A 05 12-00 Grade 2 A
G-X260 NiCr 4 2 FB Ni4 Cr2 HC Grade 2 B 05 13-00 Grade 2 B
G-X300 CrNiSi 9 5 2 FB Cr9 Ni5 Grade 2 C, D, E 04 57-00 Grade 2 C, D, E
Workpiece materials
Materiali Werkstoffmaterialien Matériaux Materiales Материалы
39
TYPHOON
PU-HPU
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
INFO
UNE-IHA JIS UNI EN UNS GOST
SCR 415 16 MnCr 5 16 MnCr 5 G51170
SCM 440 (H) 42 CrMo 4 42 CrMo 4 G41400
C 70 C 67S G10700
C 75 C 75S G10780
SUP 4 C 100S G10950
C 100 KU C 105U
55 WCrV 8 KU
SUP 9 (A) 55 Cr 3 55 Cr 3 G51550
SC MnH 1
107 CrV 3 KU 107 CrV 3 T61202
SKS 3 95 MnWCr 5 KU T31501
90 MnVCr 8 KU 90 MnCrV 8 T31502
SUJ 2 100 Cr 6 100 Cr 6 G51986
SKD 61 X 40 CrMo 5 1 1 KU X 40 CrMoV 5 1 T20813
SKD 12 X 100 CrMoV 5 1 KU X 100 CrMoV 5 T30102
SKD 11 X 155 CrVMo 12 1 KU X 155 CrVMo 12 1 T30402
SKD 2 X 215 CrW 12 1 KU
X 165 CrMoW 12 KU
SKT 4 T61206
SKH 55 HS 6-5-2-5 HS 6-5-2-5
SKH 51 HS 2-9-1-8 HS 2-10-1-8 T11342
SKH 9, SKH 51 HS 6-5-2 HS 6-5-2 T11302
SKH 2 HS 18-0-1 HS 18-0-1 T12001
SUS 420 J 1 X 20 Cr 13 X 20 Cr 13 S42000
SUS 440 A X 70 CrMo 15 S44002
SUS 440 B X CrTi 12 X 90 CrMoV 18 S44003
SUS 440 C X 105 CrMo 17 X 105 CrMo 17 S44004
X 3 CrNiMoAl 13 8 2 S13800
SCS 24, SUS 630 X 5 CrNiCuNb 16 4 S17400
SUS 631 X 7 CrNiAl 17 7 X 7 CrNiAl 17 7 S17700
SUH 660 X 6 NiCrTiMoV 25 15 S66286
EN-GJN-HV520 F45001
EN-GJN-HV550 F45000
EN-GJN-HV600(X-
Cr11) F45003
Hardness
Durezza Härte Dureté Dureza Твёрдость
40
TYPHOON
PU-HPU
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
INFO
HRC VICKERS
BRINELL HARDNESS ROCKWELL HARDNESS ROCKWELL SUPERFICIAL HARDNESS SHORE
HARDNESS
N/mm2
TENSILE
STRENGHT
HRC
standard
ball
tungsten
carbide ball A scale B scale D scale 15-N scale 30-N scale 45-N scale
68 940 - - 85.6 - 76.9 93.2 84.4 75.4 97 - 68
67 900 - - 85.0 - 76.1 92.9 83.6 74.2 95 - 67
66 865 - - 84.5 - 75.4 92.5 82.8 73.3 92 - 66
65 832 - (739) 83.9 - 74.5 92.2 81.9 72.0 91 - 65
64 800 - (722) 83.4 - 73.8 91.8 81.1 71.0 88 - 64
63 772 - (705) 82.8 - 73.0 91.4 80.1 69.9 87 - 63
62 746 - (688) 82.3 - 72.2 91.1 79.3 68.8 85 - 62
61 720 - (670) 81.8 - 71.5 90.7 78.4 67.7 83 - 61
60 697 - (654) 81.2 - 70.7 90.2 77.5 66.7 81 - 60
59 674 - (634) 80.7 - 69.9 89.8 76.6 65.5 80 - 59
58 653 - 615 80.1 - 69.2 89.3 75.7 64.3 78 - 58
57 633 - 595 79.6 - 68.5 88.9 74.8 63.2 76 - 57
56 613 - 577 79.0 - 67.7 88.3 73.9 62.0 75 - 56
55 595 - 560 78.5 - 66.9 87.9 73.0 60.9 74 2075 55
54 577 - 543 78.0 - 66.1 87.4 72.0 59.8 72 2015 54
53 560 - 525 77.4 - 65.4 86.9 71.2 58.6 71 1950 53
52 544 (500) 512 76.8 - 64.6 86.4 70.2 57.4 69 1880 52
51 528 (487) 496 76.3 - 63.8 85.9 69.4 56.1 68 1820 51
50 513 (475) 481 75.9 - 63.1 85.5 68.5 55.0 67 1760 50
49 498 (464) 469 75.2 - 62.1 85.0 67.6 53.8 66 1695 49
48 484 451 455 74.7 - 61.4 84.5 66.7 52.5 64 1635 48
47 471 442 443 74.1 - 60.8 83.9 65.8 51.4 63 1580 47
46 458 432 432 73.6 - 60.0 83.5 64.8 50.3 62 1530 46
45 446 421 421 73.1 - 59.2 83.0 64.0 49.0 60 1480 45
44 434 409 409 72.5 - 58.5 82.5 63.1 47.8 58 1435 44
43 423 400 400 72.0 - 57.7 82.0 62.2 46.7 57 1385 43
42 412 390 390 71.5 - 56.9 81.5 61.3 45.5 56 1340 42
41 402 381 381 70.9 - 56.2 80.9 60.4 44.3 55 1295 41
40 392 371 371 70.4 - 55.4 80.4 59.5 43.1 54 1250 40
39 382 362 362 69.9 - 54.6 79.9 58.6 41.9 52 1215 39
38 372 353 353 69.4 - 53.8 79.4 57.7 40.8 51 1180 38
37 363 344 344 68.9 - 53.1 78.8 56.8 39.6 50 1160 37
36 354 336 336 68.4 (109.0) 52.3 78.3 55.9 38.4 49 1115 36
35 345 327 327 67.9 (108.5) 51.5 77.7 55.0 37.2 48 1080 35
34 336 319 319 67.4 (108.0) 50.8 77.2 54.2 36.1 47 1055 34
33 327 311 311 66.8 (107.5) 50.0 76.6 53.3 34.9 46 1025 33
32 318 301 301 66.3 (107.0) 49.2 76.1 52.1 33.7 44 1000 32
31 310 294 294 65.8 (106.0) 48.4 75.6 51.3 32.5 43 980 31
30 302 286 286 65.3 (105.5) 47.7 75.0 50.4 31.3 42 950 30
29 294 279 279 64.7 (104.5) 47.0 74.5 49.5 30.1 41 930 29
28 286 271 271 64.3 (104.0) 46.1 73.9 48.6 28.9 41 910 28
27 279 264 264 63.8 (103.0) 45.2 73.3 47.7 27.8 40 880 27
26 272 258 258 63.3 (102.5) 44.6 72.8 46.8 26.7 38 860 26
25 266 253 253 62.8 (101.5) 43.8 72.2 45.9 25.5 38 840 25
24 260 247 247 62.4 (101.0) 43.1 71.6 45.0 24.3 37 825 24
23 254 243 243 62.0 100.0 42.1 71.0 44.0 23.1 36 805 23
22 248 237 237 61.5 99.0 41.6 70.5 43.2 22.0 35 785 22
21 243 231 231 61.0 98.5 40.9 69.9 42.3 20.7 35 770 21
20 238 226 226 60.5 97.8 40.1 69.4 41.5 19.6 34 760 20
(18) 230 219 219 - 96.7 - - - - 33 730 (18)
(16) 222 212 212 - 95.5 - - - - 32 705 (16)
(14) 213 203 203 - 93.9 - - - - 31 675 (14)
(12) 204 194 194 - 92.3 - - - - 29 650 (12)
(10) 196 187 187 - 90.7 - - - - 28 620 (10)
(8) 188 179 179 - 89.5 - - - - 27 600 (8)
(6) 180 171 171 - 87.1 - - - - 26 580 (6)
(4) 173 165 165 - 85.5 - - - - 25 550 (4)
(2) 166 158 158 - 83.5 - - - - 24 530 (2)
(0) 160 152 152 - 81.7 - - - - 24 515 (0)
Formulas
Formule Formeln Formules Fórmulas Формулы
41
TYPHOON
PU-HPU
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
INFO
CUTTING SPEED VELOCITÀ DI TAGLIO SCHNITTGESCHWINDIGKEIT
VITESSE DE COUPE VELOCIDAD DE CORTE СКОРОСТЬ РЕЗАНИЯ
SPLINDLE SPEED VELOCITÀ DI ROTAZIONE MANDRINO SPINDELGESCHWINDIGKEIT
VITESSE DE ROTATION DU MANDRIN VELOCIDAD DE ROTACIÓN DEL MANDRIL ЧАСТОТА ВРАЩЕНИЯ ШПИНДЕЛЯ
FEED PER REVOLUTION AVANZAMENTO PER GIRO VORSCHUB PRO UMDREHUNG
AVANCE PAR TOUR AVANCE POR VUELTA ОБОРОТНАЯ ПОДАЧА
FEED RATE VELOCITÀ DI AVANZAMENTO VORSCHUBSGESCHWINDIGKEIT
VITESSE D’AVANCE VELOCIDAD DE AVANCE МИНУТНАЯ ПОДАЧА
FEED/TOOTH AVANZAMENTO/TAGLIENTE VORSCHUB/SCHNEIDE
AVANCE/ARÊTE DE COUPE AVANCE/FILO ПОДАЧА НА ЗУБ
METAL (CHIP) REMOVAL RATE VOLUME TRUCIOLO ASPORTATO VOLUMEN ABGETRAGENER SPÄNE
VOLUME DE COPEAU VOLUMEN VIRUTA EXTRAÍDA ОБЪЕМ УДАЛЕННОЙ СТРУЖКИ
Vc =
D x π x n
1000 m/min
n =
Vc x 1000
π x D rpm
fn =
Vf
nmm/rev mm/rev
Vf = fn x n mm/min
fz =
Vf
n x z mm
Q =
ap x ae x Vf
1000 cm3/min
fn = fz x z
D DIAMETER DIAMETRO DURCHMESSER DIAMÈTRE DIÁMETRO ДИАМЕТР
Z
NUMBER OF TEETH NUMERO TAGLIENTI SCHNEIDENANZAHL NUMÉRO DE DENTS NÚMERO DE DIENTES КОЛИЧЕСТВО ЗУБЬЕВ
ap
ae
CARBIDE DRILLS
CAPTION . 044
SELECTION GUIDE . 046
SYSTEM CHARTS . 048
TYPHOON TA - HTA - 4HTA . 051
TYPHOON PU - HPU . 081
TYPHOON SUH . 103
TYPHOON ALH . 117
TYPHOON HRC . 127
TYPHOON SUH MINI . 133
TYPHOON HL . 165
C-SD-TA NC . 199
Caption
Legenda Verzeichnis Légende Leyenda Условные обозначения
44
STOCK
h
stock standard
stock standard
Standard Lager
stock standard
stock estándar
складская позиция
f
non-standard stock
stock non standard
nicht Standard Lager
stock non standard
stock no estándar
не складская позиция
m
stock exhaustion
esaurimento stock
Vorraterschöpfung
épuisement du stock
agotamiento de stock
складские остатки
APPLICATION GUIDELINES INDICAZIONI PER L'APPLICAZIONE LEITFADEN ZUR ANWENDUNG
INDICATIONS POUR L’APPLICATION INDICACIONES PARA SU APLICACIÓN УКАЗАНИЯ ПО ПРИМЕНЕНИЮ
0
1st choice
1a scelta
1. Wahl
1er choix
1ª elección
1-й выбор
,
suitable
adatto
geeignet
adapté
adecuado
пригоден
SHANK ATTACCO SCHAFT QUEUE MANGO ХВОСТОВИК
cylindrical shank
attacco cilindrico
zylindrischer Schaft
queue cylindrique
mango cilíndrico
цилиндрическое крепление
GEOMETRY GEOMETRIA GEOMETRIE GÉOMÉTRIE GEOMETRÍA ГЕОМЕТРИЯ
general purpose
uso generico
allgemeine Anwendung
applications génériques
uso genérico
общего назначения
general purpose with inside coolant
uso generico con refrigerazione interna
allgemeine Anwendung mit innerer Kühlmittelzuführung
applications génériques à trous d’huile
uso genérico con refrigeración interna
общего назначения с внутренней подачей СОЖ
4 guides chamfer with inside coolant
4 fasi con refrigerazione interna
4 Führungsfasen mit innerer Kühlmittelzuführung
4 listels à trous d’huile
4 fases con refrigeración interna
4 направляющих с внутренней подачей СОЖ
140°+C45°
universal application
applicazione universale
Universelle Anwendung
application universelle
aplicación universal
универсальное применение
140°+C45°
universal application with inside coolant
applicazione universale con refrigerazione interna
Universelle Anwendung mit Innenkühlung
application universelle avec lubrification interne
aplicación universal con refrigeración interna
универсальное применение с внутренним охлаждением
stainless steel with inside coolant
acciaio inossidabile con refrigerazione interna
rostfreien Stahl mit innerer Kühlmittelzuführung
acier inoxydable à trous d’huile
acero inoxidable con refrigeración interna
нержавеющая сталь с внутренней подачей подачей СОЖ
ALU
130°
aluminium with inside coolant
alluminio con refrigerazione interna
Aluminium mit innerer Kühlmittelzuführung
aluminium à trous d’huile
aluminio con refrigeración interna
алюминий с внутренней подачей подачей СОЖ
Caption
Legenda Verzeichnis Légende Leyenda Условные обозначения
45
GEOMETRY GEOMETRIA GEOMETRIE GÉOMÉTRIE GEOMETRÍA ГЕОМЕТРИЯ
150°+C45°
hardened steel
acciaio temprato
Hartstahl
acier trempé
acero templado
закалённая сталь
SUH MINI
135°
wide range of materials, with inside coolant, mini
ampia gamma di materiali, con refrigerazione interna, mini
breite Auswahl an Materialien, mit Innenkühlung, mini
large gamme de matériaux, avec lubrification interne, mini
amplia gama de materiales, con refrigeración interna, min
i
широкий выбор материалов, с внутренним охлаждением, мини
135°
wide range of materials, with inside coolant, long
ampia gamma di materiali, con refrigerazione interna, lunga
breite Auswahl an Materialien, mit Innenkühlung, lang
large gamme de matériaux, avec lubrification interne, longue
amplia gama de materiales, con refrigeración interna, larga
широкий выбор материалов, с внутренним охлаждением, длинная
90-120°
NC starting drill
punte da centri NC
NC Anbohrer mit Spitzenwinkel
forets à centrer NC
brocas de hacer punto NC
центровочные свёрла для станков с ЧПУ
MATERIAL MATERIALE WERKSTOFF MATIÈRE MATERIAL МАТЕРИАЛ
micrograin
micrograna
Mikrokörnung
micrograin
micrograno
микрозернистый твёрдый сплав
SURFACE TREATMENT TRATTAMENTO SUPERFICIALE OBERFLÄCHENBEHANDLUNG
TRAITMENT DE SURFACE TRATAMIENTO SUPERFICIAL ОБРАБОТКА ПОВЕРХНОСТИ
...
BR
uncoated
non rivestito
unbeschichtet
non revêtu
no revestido
без покрытия
...
POLISHED
polished
lappato
geläppt
poli
pulido
полированный
COATINGS RIVESTIMENTI BESCHICHTUNGEN REVÊTEMENTS RECUBRIMIENTOS ПОКРЫТИЕ
PV250
hardness (HV)
durezza (HV)
Härte (HV)
dureté (HV)
dureza (HV)
твёрдость (HV)
3300 3300 3300 3600
friction coefficient
coefficiente d’attrito
Reibungskoeffizient
coefficent de frottement
coeficiente de rozamiento
коэффициент трения
0.3 0.3 0.3 0.25
thickness (μ)
spessore (μ)
dicke (μ)
épaisseur (μ)
espesor (μ)
толщина (мкм)
3 2.5÷3.5 2.5÷3.5 2÷3
max working temperature (°C)
temperatura max (°C)
hochste Temperatur (°C)
température maximale (°C)
temperatura máx (°C)
макс. температура (°C)
950° 900° 1100° 1200°
Selection Guide
Indice grafico Auswahlhilfe Indice graphique Índice gráfico Руководство по выбору
46
ITEM No. PAGE
TA-HTA-4HTA general purpose
3xD - 5xD - 8xD
343TA 54
318N 54
353TA 58
353HTA 58
355TA 66
355HTA 66
3584HTA 74
PU-HPU universal application
3xD - 5xD
353PU 83
353HPU 83
355PU 92
355HPU 92
SUH stainless steel
3xD - 5xD
353SUH 105
355SUH 111
ALH non-ferrous material
3xD - 5xD
353ALH 119
355ALH 123
HRC hardened steel 45-62 HRC
3xD 353HRC 129
SUH MINI short, long and extra long
5xD ÷ 30xD
355SUH MINI 140
358SUH MINI 144
3512SUH MINI 148
3520SUH MINI 152
3525SUH MINI 156
3530SUH MINI 160
HL long and extra long
12xD ÷ 30xD
3512HL 173
3515HL 178
3520HL 183
3525HL 188
3530HL 193
NC spotting
90° - 120°
CS-D-TA 90 200
CS-D-TA 120 200
Selection Guide
Indice grafico Auswahlhilfe Indice graphique Índice gráfico Руководство по выбору
47
RANGE DRILLING
DEPTH NORM TYPE MATERIAL /
COATING HRC POINT
ANGLE
HELIX
ANGLE
CHAMFER
ISO P ISO M ISO K ISO N ISO S ISO H
1-16 3xD DIN6539 TA MG
PV200 140° 30° +,,,
1-13 3xD DIN6539 TA MG
BR 140° 30° +,,
,
3-20 3xD DIN6537K TA MG
PV200 140° 30° +,, ,
3-20 3xD DIN6537K HTA MG
PV200 140° 30° +,,,,
3-20 5xD DIN3537L TA MG
PV200 140° 30° +,, ,
3-20 5xD DIN3537L HTA MG
PV200 140° 30° +,,,,
3-16 8xD OSAWA 4HTA MG
PV300 140° 30° +++,,
3-20 3xD DIN6537K PU MG
PV250 140° 30° 45° +++,+
3-20 3xD DIN6537K HPU MG
PV250 140° 30° 45° +++,+
3-20 5xD DIN6537L PU MG
PV250 140° 30° 45° +++,+
3-20 5xD DIN6537L HPU MG
PV250 140° 30° 45° +++,+
3-20 3xD DIN6537K SUH MG
PV300 140° 30° ,+,,,
3-20 5xD DIN6537L SUH MG
PV300 140° 30° ,+,,,
3-20 3xD DIN6537K ALH MG
POLISHED 130° 30° +
3-20 5xD DIN6537L ALH MG
POLISHED 130° 30° +
2.6-14.2 3xD DIN6537K HRC MG
PV1000 45-62 150° 15° 45° +
1-3 5xD OSAWA SUH
MINI
MG
PV300 135° 30° +++,,
1-3 8xD OSAWA SUH
MINI
MG
PV300 135° 30° +++,,
1-3 12xD OSAWA SUH
MINI
MG
PV300 135° 30° +++,,
1-3 20xD OSAWA SUH
MINI
MG
PV300 135° 30° +++,,
1-3 25xD OSAWA SUH
MINI
MG
PV300 135° 30° +++,,
1-3 30xD OSAWA SUH
MINI
MG
PV300 135° 30° +++,,
3.1-10 12xD OSAWA HL MG
PV250 135° 30° +++,,
3.1-10 15xD OSAWA HL MG
PV250 135° 30° +++,,
3.1-10 20xD OSAWA HL MG
PV250 135° 30° +++,,
3.1-9.5 25xD OSAWA HL MG
PV250 135° 30° +++,,
3.1-8 30xD OSAWA HL MG
PV250 135° 30° +++,,
6-16 OSAWA SD MG
PV200 90° 30° ++++,
6-16 OSAWA SD MG
PV200 120° 30° ++++,
+ 1st choice , suitable
System charts
Grafici applicativi Anwendungsgrafiken Graphiques d’application Gráficos aplicativos Диаграммы
48
ISO P
ISO M
TA+
HTA+
4HTA+
Vc [m/min]
40 80 120 160
400
600
800
1000
1300
Rm [N/mm2]
HL+
SUH mini+
PU+
HPU+
SUH,
Vc [m/min]
25 50 75 100
high
medium
high
medium
low
low
Machinability
SUH+
PU+
HPU+
S
HL+
SUH mini+
TA,
HTA,
4HTA+
STEEL APPLICATION
STAINLESS STEEL APPLICATION
TA : general purpose (page 51)
HTA : general purpose with inside coolant (page 51)
4HTA : 4 margins general purpose with inside coolant (page 51)
PU : universal purpose (page 81)
HPU : universal purpose with inside coolant (page 81)
SUH : special purpose with inside coolant (page 103)
SUH MINI : miniature 5xD ÷ 30xD with inside coolant (page 133)
HL : long 12xD ÷ 30xD (page 165)
+ 1st choice , suitable
+ 1st choice , suitable
System charts
Grafici applicativi Anwendungsgrafiken Graphiques d’application Gráficos aplicativos Диаграммы
49
ISO K
ISO N
Vc [m/min]
50 100 150 200
100
200
300
400
HB hardness
Vc [m/min]
150 200 250 300
4
8
Si %
12
16
20
HL
UH
TA+
HTA+
4HTA+
SUH,
PU+
HPU+
HL,
SUH mini,
ALH+
PU,
HPU,
SUH,
HTA,
4HTA,
CAST IRON APPLICATION
NON-FERROUS MATERIALS APPLICATION
HL+
SUH mini+
TA : general purpose (page 51)
HTA : general purpose with inside coolant (page 51)
4HTA : 4 margins general purpose with inside coolant (page 51)
PU : universal purpose (page 81)
HPU : universal purpose with inside coolant (page 81)
SUH : special purpose with inside coolant (page 103)
ALH : special purpose with inside coolant (page 117)
SUH MINI : miniature 5xD ÷ 30xD with inside coolant (page 133)
HL : long 12xD ÷ 30xD (page 165)
+ 1st choice , suitable
+ 1st choice , suitable
System charts
Grafici applicativi Anwendungsgrafiken Graphiques d’application Gráficos aplicativos Диаграммы
50
ISO S
ISO H
Vc [m/min]
30 45 60 75
10
20
30
50
HRC hardness
Vc [m/min]
10 15 20 25
45
50
HRC hardness
HRC+
55
60
62
40
SUH,
HL,
SUH mini,
TA,
HTA,
4HTA,HPU+
SUPER ALLOYS APPLICATION
HARDENED STEEL APPLICATION
TA : general purpose (page 51)
HTA : general purpose with inside coolant (page 51)
4HTA : 4 margins general purpose with inside coolant (page 51)
HPU : universal purpose with inside coolant (page 81)
SUH : special purpose with inside coolant (page 103)
HRC : special purpose (page 127)
SUH MINI : miniature 5xD ÷ 30xD with inside coolant (page 133)
HL : long 12xD ÷ 30xD (page 165)
+ 1st choice , suitable
+ 1st choice , suitable
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON TA-HTA-4HTA
HIGH PERFORMANCE - GENERAL PURPOSE
The tool of choice for multi-purpose drilling on ISO P, M, K
below 1100N/mm².
La soluzione ideale per la foratura di materiali ISO P, M, K
sino a 1100N/mm².
Die optimale Lösung für das Bohren der Materialien
ISO P, M, K bis zu 1100 N/mm².
La solution idéale pour le perçage de matériaux ISO P, M, K
jusqu’à 1100N/mm².
La solución ideal para el taladro de materiales ISO P, M, K
hasta 1100N/mm².
Идеальное решение для сверления материалов по
ISO P, M, K до 1100 Н/мм².
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
52
TYPHOON TA-HTA-4HTA HIGH PERFORMANCE - GENERAL PURPOSE
TA-HTA
- Self-centering geometry for accurate holes
- Curved cutting edge for low cutting forces.
- High relief angle: reduces cutting forces,
improves chip shape and ejection
- Wide chip pocket: improves chip ejection
- Back taper geometry: improves the cutting
performance
- Modified oil holes: improves coolant feed
- Substrate and coating: specifically selected
for high wear resistance, long and reliable
life
TA-HTA
- Affûtage autocentré pour un perçage plus
précis
- Profil de l’arête ondulé pour faible effort
de coupe
- Géométrie de l’arête avec dépouille
accentuée pour réduire l’effort de coupe
et améliorer la forme et le contrôle des
copeaux
- Goujoures recourbées et larges pour
améliorer l’évacuation des copeaux
- Géométrie du corps avec conicité arrière
pour faciliter la coupe
- Trous d'arrosage avec géométrie modifiée
pour apporter une lubrification plus
importante.
- Substrat et revêtement spécifiques pour
garantir durée et fiabilité
TA-HTA
- Affilatura autocentrante per fori precisi
- Profilo del tagliente ondulato per basso
sforzo di taglio
- Geometria del tagliente con spoglia
accentuata per ridurre lo sforzo di taglio e
migliorare la forma e il controllo dei trucioli
- Gole ricurve e ampie per migliorare
l’evacuazione dei trucioli
- Geometria del corpo con conicità
posteriore per agevolare l’azione di taglio
- Fori di refrigerazione con geometria
modificata per un maggior apporto di
refrigerante
- Substrato e rivestimento specifici per
garantire durata e affidabilità
TA-HTA
- Afilado autocentrante para agujeros
precisos
- Perfil del filo ondulado, para bajo esfuerzo
de corte
- Geometría del filo con salida acentuada
para reducir el esfuerzo de corte y mejorar
la forma y el control de las virutas
- Ranuras curvadas y amplias para mejorar
la evacuación de las virutas
- Geometría del cuerpo con conicidad
posterior para facilitar la acción de corte
- Agujeros de refrigeración con geometría
modificada para una mayor aportación de
refrigerante
- Sustrato y revestimiento específicos para
garantizar duración y fiabilidad
TA-HTA
- Selbstzentrierender Schliff für präzise
Bohrungen
- Gewelltes Schneidkantenprofil für
geringen Schneiddruck
- Geometrie der Schneidkante mit
ausgeprägtem Hinterschliff zur Reduzierung
des Schneiddrucks und zur Verbesserung
der Späneform und -kontrolle
- Gebogene und breite Nuten zur
Verbesserung der Späneabführung
- Geometrie des Körpers mit konischem
hinteren Bereich zur Erleichterung des
Schnittvorgangs
- Kühlöffnungen mit abgeänderter
Geometrie für einen verbesserten
Kühlmittelzufluss
- Spezielles Trägermaterial und spezielle
Beschichtung zur Gewährleistung von
Standzeit und Zuverlässigkeit
TA-HTA
- Самоцентрирующаяся заточка для
сверления отверстий высокой точности
- Закругленный профиль режущей
кромки для низких режущий усилий
- Большой угол наклона спиральной
канавки для уменьшения сил резания и
улучшения условий удаления стружки
- Широкие стружечные канавки для
лучшего вывода стружки
- Геометрия с обратным конусом для
повышения производительности
- Большие отверстия: увеличена
эффективность подвода СОЖ
- Специальное покрытие для повышения
стойкости инструмента
TA
HTA
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
53
TYPHOON TA-HTA-4HTA HIGH PERFORMANCE - GENERAL PURPOSE
4HTA 8xD
- Self-centering geometry for accurate holes
- 4 margin lands: reliable machining for
highly accurate and straight holes even in
deep drilling
- Straight cutting edge: short chips for easy
evacuation and high reliability
- Special edge design: high performance
and edge protection
- Back taper geometry: improves the cutting
performance
- Chip pocket finishing: highly polished to
reduce welding and improves chip ejection
- Large oil holes: improves coolant feed
- Substrate and coating: specifically selected
for high wear resistance, long and reliable
life
4HTA 8xD
- Affûtage autocentré pour un perçage plus
précis.
- Géométrie avec «4 listels»: trous droits et
précis, même en présence de trous profonds.
- Profil de l’arête droit et renforcé : il génère
des copeaux courts et garantit une grande
fiabilité
- Géométrie de l’arête avec affûtage
spécifique pour protéger l’arête et les angles
- Géométrie du corps avec conicité arrière
pour faciliter l’action de coupe
- Finition des goujoures : polie pour réduire le
problème du collage et faciliter l’évacuation
des copeaux
- Trous de lubrification avec géométrie
modifiée pour un apport de lubrifiant plus
important
- Substrat et revêtement spécifiques pour
garantir durée et fiabilité
4HTA 8xD
- Affilatura autocentrante per fori precisi
- Geometria con “4 Margini": fori rettilinei e
precisi, anche nel caso di profondità elevate.
- Profilo del tagliente diritto e rinforzato:
genera trucioli corti e garantisce grande
affidabilità
- Geometria del tagliente con affilatura
specifica a protezione del tagliente e degli
spigoli
- Geometria del corpo con conicità posteriore
per agevolare l’azione di taglio
- Finitura gole: lappate per ridurre il problema
dell’incollaggio e facilitare l’evacuazione dei
trucioli
- Fori di refrigerazione con geometria
modificata per un maggior apporto di
refrigerante
- Substrato e rivestimento specifici per
garantire durata e affidabilità
4HTA 8xD
- Afilado autocentrante para agujeros
precisos
- Geometría con «4 Márgenes»: agujeros
rectilíneos y precisos, incluso en caso de
profundidades elevadas.
- Perfil del filo recto y reforzado: genera
virutas cortas y garantiza una gran fiabilidad
- Geometría del filo con afilado específico
para proteger el filo y los ángulos
- Geometría del cuerpo con conicidad
posterior para facilitar la acción de corte
- Acabado ranuras: lapeadas para reducir
el problema del encolado y facilitar la
evacuación de las virutas
- Agujeros de refrigeración con geometría
modificada para una mayor aportación de
refrigerante
- Sustrato y revestimiento específicos para
garantizar duración y fiabilidad
4HTA 8xD
- Selbstzentrierender Schliff für präzise
Bohrungen
- Geometrie mit „4 Fasen“: gerade und präzise
Bohrungen, auch bei großen Tiefen.
- Gerades und verstärktes Schneidkantenprofil:
zur Erzeugung kurzer Späne und zur
Gewährleistung hoher Zuverlässigkeit
- Geometrie der Schneidkante mit speziellem
Schliff zum Schutz von Schneidkante und Kanten
- Geometrie des Körpers mit konischem hinteren
Bereich zur Erleichterung des Schnittvorgangs
- Schlichtbearbeitung der Nuten: geläppt, um
Probleme durch Verkleben zu reduzieren und
um die Späneabführung zu erleichtern
- Kühlöffnungen mit abgeänderter Geometrie für
einen verbesserten Kühlmittelzufluss
- Spezielles Trägermaterial und spezielle
Beschichtung zur Gewährleistung von Standzeit
und Zuverlässigkeit
4HTA 8xD
- Самоцентрирующаяся заточка для
сверления отверстий высокой точности
- Геометрия с 4 режущими кромками:
надежная обработка и высокая точность
отверстия, даже, при глубоком сверлении
-
Прямые режущие кромки: легкий вывод
короткой стружки и высокая эффективность
- Геометрия режущих кромок со
специальной заточкой: высокая
производительность и защита кромок
- Геометрия с обратным конусом:
повышение производительности
- Отполированные стружечные канавки:
уменьшают вероятность приваривания
стружки и облегчают ее вывод
- Большие отверстия: увеличена
эффективность подвода СОЖ
- Специальное покрытие для повышения
стойкости инструмента
1
2
3
4
4HTA
TYPHOON - high performance solid carbide drills
54
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
h stock standard f non-standard stock m stock exhaustion
D(h7) D Tol. d(h6) l l1 L EDP No. Stock EDP No. Stock
1.00 0/-0.010 2 6 40 343TA0100 hP318N0100 h
1.10 0/-0.010 2 7 40 343TA0110 hP318N0110 h
1.20 0/-0.010 2 8 40 343TA0120 hP318N0120 h
1.30 0/-0.010 2 8 40 343TA0130 hP318N0130 h
1.40 0/-0.010 2 9 40 343TA0140 hP318N0140 h
1.50 0/-0.010 2 9 40 343TA0150 hP318N0150 h
1.60 0/-0.010 2 10 40 343TA0160 hP318N0160 h
1.70 0/-0.010 2 10 40 343TA0170 hP318N0170 h
1.80 0/-0.010 2 11 40 343TA0180 hP318N0180 h
1.90 0/-0.010 2 11 40 343TA0190 hP318N0190 h
2.00 0/-0.010 2 12 40 343TA0200 hP318N0200 h
2.10 0/-0.010 2.1 12 40 343TA0210 hP318N0210 h
2.20 0/-0.010 2.2 13 40 343TA0220 hP318N0220 h
2.30 0/-0.010 2.3 13 46 343TA0230 hP318N0230 h
2.40 0/-0.010 2.4 14 46 343TA0240 hP318N0240 h
2.50 0/-0.010 2.5 14 46 343TA0250 hP318N0250 h
2.60 0/-0.010 2.6 14 46 343TA0260 hP318N0260 h
2.70 0/-0.010 2.7 16 46 343TA0270 hP318N0270 h
2.80 0/-0.010 2.8 16 49 343TA0280 hP318N0280 h
2.90 0/-0.010 2.9 16 49 343TA0290 hP318N0290 h
3.00 0/-0.010 3 16 49 343TA0300 hP318N0300 h
3.10 0/-0.012 3.1 18 49 343TA0310 hP318N0310 h
3.20 0/-0.012 3.2 18 49 343TA0320 hP318N0320 h
3.30 0/-0.012 3.3 18 52 343TA0330 hP318N0330 h
3.40 0/-0.012 3.4 20 52 343TA0340 hP318N0340 h
3.50 0/-0.012 3.5 20 52 343TA0350 hP318N0350 h
3.60 0/-0.012 3.6 20 52 343TA0360 hP318N0360 h
3.70 0/-0.012 3.7 20 52 343TA0370 hP318N0370 h
3.80 0/-0.012 3.8 22 55 343TA0380 hP318N0380 h
3.90 0/-0.012 3.9 22 55 343TA0390 hP318N0390 h
4.00 0/-0.012 4 22 55 343TA0400 hP318N0400 h
4.10 0/-0.012 4.1 22 55 343TA0410 hP318N0410 h
4.20 0/-0.012 4.2 22 55 343TA0420 hP318N0420 h
4.30 0/-0.012 4.3 24 58 343TA0430 hP318N0430 h
4.40 0/-0.012 4.4 24 58 343TA0440 hP318N0440 h
4.50 0/-0.012 4.5 24 58 343TA0450 hP318N0450 h
4.60 0/-0.012 4.6 24 58 343TA0460 hP318N0460 h
4.70 0/-0.012 4.7 24 58 343TA0470 hP318N0470 h
4.80 0/-0.012 4.8 26 62 343TA0480 hP318N0480 h
343TA-318N
general purpose, coated (343TA) and uncoated (318N)
3XD DIN
6539
343TA 318N
343TA
318N
PMKNSH
+,,, 343TA
+,,, 318N
+ 1st choice , suitable
343TA 318N
< ø2 mm
≥ ø2 mm
TYPHOON - high performance solid carbide drills
55
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
h stock standard f non-standard stock m stock exhaustion
D(h7) D Tol. d(h6) l l1 L EDP No. Stock EDP No. Stock
4.90 0/-0.012 4.9 26 62 343TA0490 hP318N0490 h
5.00 0/-0.012 5 26 62 343TA0500 hP318N0500 h
5.10 0/-0.012 5.1 26 62 343TA0510 hP318N0510 h
5.20 0/-0.012 5.2 26 62 343TA0520 hP318N0520 h
5.30 0/-0.012 5.3 26 66 343TA0530 hP318N0530 h
5.40 0/-0.012 5.4 28 66 343TA0540 hP318N0540 h
5.50 0/-0.012 5.5 28 66 343TA0550 hP318N0550 h
5.60 0/-0.012 5.6 28 66 343TA0560 hP318N0560 h
5.70 0/-0.012 5.7 28 66 343TA0570 hP318N0570 h
5.80 0/-0.012 5.8 28 70 343TA0580 hP318N0580 h
5.90 0/-0.012 5.9 28 70 343TA0590 hP318N0590 h
6.00 0/-0.012 6 28 70 343TA0600 hP318N0600 h
6.10 0/-0.015 6.1 31 70 343TA0610 hP318N0610 h
6.20 0/-0.015 6.2 31 70 343TA0620 hP318N0620 h
6.30 0/-0.015 6.3 31 70 343TA0630 hP318N0630 h
6.40 0/-0.015 6.4 31 70 343TA0640 hP318N0640 h
6.50 0/-0.015 6.5 31 70 343TA0650 hP318N0650 h
6.60 0/-0.015 6.6 31 70 343TA0660 hP318N0660 h
6.70 0/-0.015 6.7 31 70 343TA0670 hP318N0670 h
6.80 0/-0.015 6.8 34 74 343TA0680 hP318N0680 h
6.90 0/-0.015 6.9 34 74 343TA0690 hP318N0690 h
7.00 0/-0.015 7 34 74 343TA0700 hP318N0700 h
7.10 0/-0.015 7.1 34 74 343TA0710 hP318N0710 h
7.20 0/-0.015 7.2 34 74 343TA0720 hP318N0720 h
7.30 0/-0.015 7.3 34 79 343TA0730 hP318N0730 h
7.40 0/-0.015 7.4 34 79 343TA0740 hP318N0740 h
7.50 0/-0.015 7.5 34 79 343TA0750 hP318N0750 h
7.60 0/-0.015 7.6 37 79 343TA0760 hP318N0760 f
7.70 0/-0.015 7.7 37 79 343TA0770 hP318N0770 f
7.80 0/-0.015 7.8 37 79 343TA0780 hP318N0780 h
7.90 0/-0.015 7.9 37 79 343TA0790 hP318N0790 f
8.00 0/-0.015 8 37 79 343TA0800 hP318N0800 h
8.10 0/-0.015 8.1 37 79 343TA0810 hP318N0810 h
8.20 0/-0.015 8.2 37 79 343TA0820 hP318N0820 h
8.30 0/-0.015 8.3 37 84 343TA0830 hP318N0830 h
8.40 0/-0.015 8.4 37 84 343TA0840 hP318N0840 f
8.50 0/-0.015 8.5 37 84 343TA0850 hP318N0850 h
8.60 0/-0.015 8.6 40 84 343TA0860 hP318N0860 h
8.70 0/-0.015 8.7 40 84 343TA0870 hP318N0870 h
343TA-318N
general purpose, coated (343TA) and uncoated (318N)
3XD DIN
6539
343TA 318N
343TA
318N
PMKNSH
+,,, 343TA
+,,, 318N
+ 1st choice , suitable
343TA 318N
TYPHOON - high performance solid carbide drills
56
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
h stock standard f non-standard stock m stock exhaustion
D(h7) D Tol. d(h6) l l1 L EDP No. Stock EDP No. Stock
8.80 0/-0.015 8.8 40 84 343TA0880 hP318N0880 h
8.90 0/-0.015 8.9 40 84 343TA0890 hP318N0890 f
9.00 0/-0.015 9 40 84 343TA0900 hP318N0900 h
9.10 0/-0.015 9.1 40 84 343TA0910 hP318N0910 f
9.20 0/-0.015 9.2 40 84 343TA0920 hP318N0920 h
9.30 0/-0.015 9.3 40 89 343TA0930 hP318N0930 h
9.40 0/-0.015 9.4 40 89 343TA0940 hP318N0940 f
9.50 0/-0.015 9.5 40 89 343TA0950 hP318N0950 h
9.60 0/-0.015 9.6 43 89 343TA0960 hP318N0960 f
9.70 0/-0.015 9.7 43 89 343TA0970 hP318N0970 f
9.80 0/-0.015 9.8 43 89 343TA0980 hP318N0980 h
9.90 0/-0.015 9.9 43 89 343TA0990 hP318N0990 f
10.00 0/-0.015 10 43 89 343TA1000 hP318N1000 h
10.20 0/-0.018 10.2 43 89 343TA1020 hP318N1020 h
10.50 0/-0.018 10.5 43 95 343TA1050 hP318N1050 h
11.00 0/-0.018 11 47 95 343TA1100 hP318N1100 h
11.50 0/-0.018 11.5 47 102 343TA1150 hP318N1150 h
12.00 0/-0.018 12 51 102 343TA1200 hP318N1200 h
12.50 0/-0.018 12.5 51 103 343TA1250 hP318N1250 h
13.00 0/-0.018 13 51 103 343TA1300 hP318N1300 h
13.50 0/-0.018 13.5 54 107 343TA1350 h
14.00 0/-0.018 14 54 107 343TA1400 h
14.50 0/-0.018 14.5 56 111 343TA1450 h
15.00 0/-0.018 15 56 111 343TA1500 h
15.50 0/-0.018 15.5 58 115 343TA1550 h
16.00 0/-0.018 16 58 115 343TA1600 h
343TA-318N
general purpose, coated (343TA) and uncoated (318N)
3XD DIN
6539
343TA 318N
343TA
318N
PMKNSH
+,,, 343TA
+,,, 318N
+ 1st choice , suitable
343TA 318N
TYPHOON - high performance solid carbide drills
57
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
CUTTING PARAMETERS
343TA
Ø RUN OUT
<0.02mm
Material Group
ISO 513 P1 P2 P3 M1 M2 K1 N1 N2
Hardness/Rm < 800 N/mm² < 750 N/mm² 150-250 HB
Vc (m/min) 80-100 35-45 80-100 140-180
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
128660 0.050 1430 12740 0.035 450 28660 0.050 1430 50960 0.065 3310
214330 0.070 1000 6370 0.049 310 14330 0.070 1000 25480 0.091 2320
39550 0.086 820 4250 0.060 260 9550 0.086 820 16990 0.112 1900
47170 0.126 900 3180 0.088 280 7170 0.126 900 12740 0.164 2090
55730 0.131 750 2550 0.092 230 5730 0.131 750 10190 0.170 1740
64780 0.145 690 2120 0.102 220 4780 0.145 690 8490 0.189 1600
74090 0.165 670 1820 0.116 210 4090 0.165 670 7280 0.215 1560
83580 0.185 660 1590 0.130 210 3580 0.185 660 6370 0.241 1530
93180 0.205 650 1420 0.144 200 3180 0.205 650 5660 0.267 1510
10 2870 0.224 640 1270 0.157 200 2870 0.224 640 5100 0.291 1490
11 2610 0.244 640 1160 0.171 200 2610 0.244 640 4630 0.317 1470
12 2390 0.263 630 1060 0.184 200 2390 0.263 630 4250 0.342 1450
13 2200 0.282 620 980 0.197 190 2200 0.282 620 3920 0.367 1440
14 2050 0.302 620 910 0.211 190 2050 0.302 620 3640 0.393 1430
15 1910 0.315 600 850 0.221 190 1910 0.315 600 3400 0.410 1390
16 1790 0.336 600 800 0.235 190 1790 0.336 600 3180 0.437 1390
318N
Ø RUN OUT
<0.02mm
Material Group
ISO 513 P1 P2 P3 M1 M2 K1 N1 N2
Hardness/Rm < 800 N/mm² < 750 N/mm² 150-250 HB
Vc (m/min) 60-80 20-30 50-70 100-140
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
122290 0.035 780 7960 0.025 200 19110 0.032 600 38220 0.046 1740
211150 0.050 560 3980 0.035 140 9550 0.045 430 19110 0.065 1240
37430 0.065 480 2650 0.046 120 6370 0.059 370 12740 0.085 1080
45570 0.080 450 1990 0.056 110 4780 0.072 340 9550 0.104 990
54460 0.095 420 1590 0.067 110 3820 0.086 330 7640 0.124 940
63720 0.110 410 1330 0.077 100 3180 0.099 310 6370 0.143 910
73180 0.125 400 1140 0.088 100 2730 0.113 310 5460 0.163 890
82790 0.140 390 1000 0.098 100 2390 0.126 300 4780 0.182 870
92480 0.155 380 880 0.109 100 2120 0.140 300 4250 0.202 860
10 2230 0.170 380 800 0.119 100 1910 0.153 290 3820 0.221 840
11 2030 0.185 380 720 0.130 90 1740 0.167 290 3470 0.241 830
12 1860 0.200 370 660 0.140 90 1590 0.180 290 3180 0.260 830
13 1710 0.215 370 610 0.151 90 1470 0.194 280 2940 0.280 820
TYPHOON - high performance solid carbide drills
58
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
h stock standard f non-standard stock m stock exhaustion
D(m7) D Tol. d(h6) l l1 L EDP No. Stock EDP No. Stock
3.00 +0.012/+0.002 6 14 20 62 353TA0300 h353HTA0300 h
3.10 +0.016/+0.004 6 14 20 62 353TA0310 h353HTA0310 h
3.20 +0.016/+0.004 6 14 20 62 353TA0320 h353HTA0320 h
3.30 +0.016/+0.004 6 14 20 62 353TA0330 h353HTA0330 h
3.40 +0.016/+0.004 6 14 20 62 353TA0340 h353HTA0340 h
3.50 +0.016/+0.004 6 14 20 62 353TA0350 h353HTA0350 h
3.60 +0.016/+0.004 6 14 20 62 353TA0360 h353HTA0360 h
3.70 +0.016/+0.004 6 14 20 62 353TA0370 h353HTA0370 h
3.80 +0.016/+0.004 6 17 24 66 353TA0380 h353HTA0380 h
3.90 +0.016/+0.004 6 17 24 66 353TA0390 h353HTA0390 h
4.00 +0.016/+0.004 6 17 24 66 353TA0400 h353HTA0400 h
4.10 +0.016/+0.004 6 17 24 66 353TA0410 h353HTA0410 h
4.20 +0.016/+0.004 6 17 24 66 353TA0420 h353HTA0420 h
4.30 +0.016/+0.004 6 17 24 66 353TA0430 h353HTA0430 h
4.40 +0.016/+0.004 6 17 24 66 353TA0440 h353HTA0440 h
4.50 +0.016/+0.004 6 17 24 66 353TA0450 h353HTA0450 h
4.60 +0.016/+0.004 6 17 24 66 353TA0460 h353HTA0460 h
4.70 +0.016/+0.004 6 17 24 66 353TA0470 h353HTA0470 h
4.80 +0.016/+0.004 6 20 28 66 353TA0480 h353HTA0480 h
4.90 +0.016/+0.004 6 20 28 66 353TA0490 h353HTA0490 h
5.00 +0.016/+0.004 6 20 28 66 353TA0500 h353HTA0500 h
5.10 +0.016/+0.004 6 20 28 66 353TA0510 h353HTA0510 h
5.20 +0.016/+0.004 6 20 28 66 353TA0520 h353HTA0520 h
5.30 +0.016/+0.004 6 20 28 66 353TA0530 h353HTA0530 h
5.40 +0.016/+0.004 6 20 28 66 353TA0540 h353HTA0540 h
5.50 +0.016/+0.004 6 20 28 66 353TA0550 h353HTA0550 h
5.60 +0.016/+0.004 6 20 28 66 353TA0560 h353HTA0560 h
5.70 +0.016/+0.004 6 20 28 66 353TA0570 h353HTA0570 h
5.80 +0.016/+0.004 6 20 28 66 353TA0580 h353HTA0580 h
5.90 +0.016/+0.004 6 20 28 66 353TA0590 h353HTA0590 h
6.00 +0.016/+0.004 6 20 28 66 353TA0600 h353HTA0600 h
6.10 +0.021/+0.006 8 24 34 79 353TA0610 h353HTA0610 h
6.20 +0.021/+0.006 8 24 34 79 353TA0620 h353HTA0620 h
6.30 +0.021/+0.006 8 24 34 79 353TA0630 h353HTA0630 h
6.40 +0.021/+0.006 8 24 34 79 353TA0640 h353HTA0640 h
6.50 +0.021/+0.006 8 24 34 79 353TA0650 h353HTA0650 h
6.60 +0.021/+0.006 8 24 34 79 353TA0660 h353HTA0660 h
6.70 +0.021/+0.006 8 24 34 79 353TA0670 h353HTA0670 h
6.80 +0.021/+0.006 8 24 34 79 353TA0680 h353HTA0680 h
353TA 353HTA
353TA-353HTA
general purpose, TA and HTA (through coolant)
3XD DIN
6537K
353TA 353HTA
353TA
353HTA
PMKNSH
+,, , 353TA
+,,,, 353HTA
+ 1st choice , suitable
353TA
353HTA
TYPHOON - high performance solid carbide drills
59
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
353TA 353HTA
353TA-353HTA
general purpose, TA and HTA (through coolant)
3XD DIN
6537K
353TA 353HTA
353TA
353HTA
PMKNSH
+,, , 353TA
+,,,, 353HTA
+ 1st choice , suitable
353TA
353HTA
h stock standard f non-standard stock m stock exhaustion
D(m7) D Tol. d(h6) l l1 L EDP No. Stock EDP No. Stock
6.90 +0.021/+0.006 8 24 34 79 353TA0690 h353HTA0690 h
7.00 +0.021/+0.006 8 24 34 79 353TA0700 h353HTA0700 h
7.10 +0.021/+0.006 8 29 41 79 353TA0710 h353HTA0710 h
7.20 +0.021/+0.006 8 29 41 79 353TA0720 h353HTA0720 h
7.30 +0.021/+0.006 8 29 41 79 353TA0730 h353HTA0730 h
7.40 +0.021/+0.006 8 29 41 79 353TA0740 h353HTA0740 h
7.50 +0.021/+0.006 8 29 41 79 353TA0750 h353HTA0750 h
7.60 +0.021/+0.006 8 29 41 79 353TA0760 h353HTA0760 h
7.70 +0.021/+0.006 8 29 41 79 353TA0770 h353HTA0770 h
7.80 +0.021/+0.006 8 29 41 79 353TA0780 h353HTA0780 h
7.90 +0.021/+0.006 8 29 41 79 353TA0790 h353HTA0790 h
8.00 +0.021/+0.006 8 29 41 79 353TA0800 h353HTA0800 h
8.10 +0.021/+0.006 10 35 47 89 353TA0810 h353HTA0810 h
8.20 +0.021/+0.006 10 35 47 89 353TA0820 h353HTA0820 h
8.30 +0.021/+0.006 10 35 47 89 353TA0830 h353HTA0830 h
8.40 +0.021/+0.006 10 35 47 89 353TA0840 h353HTA0840 h
8.50 +0.021/+0.006 10 35 47 89 353TA0850 h353HTA0850 h
8.60 +0.021/+0.006 10 35 47 89 353TA0860 h353HTA0860 h
8.70 +0.021/+0.006 10 35 47 89 353TA0870 h353HTA0870 h
8.80 +0.021/+0.006 10 35 47 89 353TA0880 h353HTA0880 h
8.90 +0.021/+0.006 10 35 47 89 353TA0890 h353HTA0890 h
9.00 +0.021/+0.006 10 35 47 89 353TA0900 h353HTA0900 h
9.10 +0.021/+0.006 10 35 47 89 353TA0910 h353HTA0910 h
9.20 +0.021/+0.006 10 35 47 89 353TA0920 h353HTA0920 h
9.30 +0.021/+0.006 10 35 47 89 353TA0930 h353HTA0930 h
9.40 +0.021/+0.006 10 35 47 89 353TA0940 h353HTA0940 h
9.50 +0.021/+0.006 10 35 47 89 353TA0950 h353HTA0950 h
9.60 +0.021/+0.006 10 35 47 89 353TA0960 h353HTA0960 h
9.70 +0.021/+0.006 10 35 47 89 353TA0970 h353HTA0970 h
9.80 +0.021/+0.006 10 35 47 89 353TA0980 h353HTA0980 h
9.90 +0.021/+0.006 10 35 47 89 353TA0990 h353HTA0990 h
10.00 +0.021/+0.006 10 35 47 89 353TA1000 h353HTA1000 h
10.10 +0.025/+0.007 12 40 55 102 353TA1010 h
10.20 +0.025/+0.007 12 40 55 102 353TA1020 h353HTA1020 h
10.30 +0.025/+0.007 12 40 55 102 353TA1030 h
10.40 +0.025/+0.007 12 40 55 102 353TA1040 h353HTA1040 h
10.50 +0.025/+0.007 12 40 55 102 353TA1050 h353HTA1050 h
10.60 +0.025/+0.007 12 40 55 102 353TA1060 h353HTA1060 h
10.70 +0.025/+0.007 12 40 55 102 353TA1070 h
TYPHOON - high performance solid carbide drills
60
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
h stock standard f non-standard stock m stock exhaustion
D(m7) D Tol. d(h6) l l1 L EDP No. Stock EDP No. Stock
10.80 +0.025/+0.007 12 40 55 102 353TA1080 h353HTA1080 h
10.90 +0.025/+0.007 12 40 55 102 353TA1090 f353HTA1090 f
11.00 +0.025/+0.007 12 40 55 102 353TA1100 h353HTA1100 h
11.10 +0.025/+0.007 12 40 55 102 353TA1110 f
11.20 +0.025/+0.007 12 40 55 102 353TA1120 h353HTA1120 h
11.30 +0.025/+0.007 12 40 55 102 353TA1130 h353HTA1130 h
11.40 +0.025/+0.007 12 40 55 102 353TA1140 f
11.50 +0.025/+0.007 12 40 55 102 353TA1150 h353HTA1150 h
11.60 +0.025/+0.007 12 40 55 102 353TA1160 f
11.70 +0.025/+0.007 12 40 55 102 353TA1170 f
11.80 +0.025/+0.007 12 40 55 102 353TA1180 h353HTA1180 h
11.90 +0.025/+0.007 12 40 55 102 353TA1190 f
12.00 +0.025/+0.007 12 40 55 102 353TA1200 h353HTA1200 h
12.20 +0.025/+0.007 14 43 60 107 353TA1220 h353HTA1220 h
12.50 +0.025/+0.007 14 43 60 107 353TA1250 h353HTA1250 h
12.80 +0.025/+0.007 14 43 60 107 353TA1280 h353HTA1280 h
13.00 +0.025/+0.007 14 43 60 107 353TA1300 h353HTA1300 h
13.30 +0.025/+0.007 14 43 60 107 353HTA1330 h
13.50 +0.025/+0.007 14 43 60 107 353TA1350 h353HTA1350 h
13.80 +0.025/+0.007 14 43 60 107 353HTA1380 h
14.00 +0.025/+0.007 14 43 60 107 353TA1400 h353HTA1400 h
14.50 +0.025/+0.007 16 45 65 115 353TA1450 h353HTA1450 h
15.00 +0.025/+0.007 16 65 65 115 353TA1500 h353HTA1500 h
15.30 +0.025/+0.007 16 65 65 115 353HTA1530 h
15.50 +0.025/+0.007 16 65 65 115 353TA1550 h353HTA1550 h
15.80 +0.025/+0.007 16 65 65 115 353HTA1580 h
16.00 +0.025/+0.007 16 65 65 115 353TA1600 h353HTA1600 h
16.50 +0.025/+0.007 18 73 73 123 353TA1650 h353HTA1650 h
17.00 +0.025/+0.007 18 73 73 123 353TA1700 h353HTA1700 h
17.50 +0.025/+0.007 18 73 73 123 353TA1750 h353HTA1750 h
18.00 +0.025/+0.007 18 73 73 123 353TA1800 h353HTA1800 h
18.50 +0.029/+0.008 20 79 79 131 353TA1850 h353HTA1850 h
19.00 +0.029/+0.008 20 79 79 131 353TA1900 h353HTA1900 h
19.50 +0.029/+0.008 20 79 79 131 353TA1950 h353HTA1950 h
20.00 +0.029/+0.008 20 79 79 131 353TA2000 h353HTA2000 h
353TA 353HTA
353TA-353HTA
general purpose, TA and HTA (through coolant)
3XD DIN
6537K
353TA 353HTA
353TA
353HTA
PMKNSH
+,, , 353TA
+,,,, 353HTA
+ 1st choice , suitable
353TA
353HTA
TYPHOON - high performance solid carbide drills
61
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
CUTTING PARAMETERS
353TA
Ø RUN OUT
<0.02mm
Material Group
ISO 513 P1 P2 P3 P4 P5 P6
Hardness/Rm 500-700 N/mm² 600-1000 N/mm² 900-1200 N/mm² 1200-1400 N/mm²
Vc (m/min) 90-110 80-100 50-70 30-50
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
310620 0.100 1060 9550 0.085 810 6370 0.075 480 4250 0.060 260
47960 0.110 880 7170 0.094 670 4780 0.083 390 3180 0.066 210
56370 0.120 760 5730 0.102 580 3820 0.090 340 2550 0.072 180
65310 0.135 720 4780 0.115 550 3180 0.101 320 2120 0.081 170
74550 0.150 680 4090 0.128 520 2730 0.113 310 1820 0.090 160
83980 0.165 660 3580 0.140 500 2390 0.124 300 1590 0.099 160
93540 0.180 640 3180 0.153 490 2120 0.135 290 1420 0.108 150
10 3180 0.195 620 2870 0.166 480 1910 0.146 280 1270 0.117 150
11 2900 0.210 610 2610 0.179 470 1740 0.158 270 1160 0.126 150
12 2650 0.230 610 2390 0.196 470 1590 0.173 270 1060 0.138 150
13 2450 0.250 610 2200 0.213 470 1470 0.188 280 980 0.150 150
14 2270 0.270 610 2050 0.230 470 1360 0.203 280 910 0.162 150
15 2120 0.290 610 1910 0.247 470 1270 0.218 280 850 0.174 150
16 1990 0.310 620 1790 0.264 470 1190 0.233 280 800 0.186 150
17 1870 0.330 620 1690 0.281 470 1120 0.248 280 750 0.198 150
18 1770 0.350 620 1590 0.298 470 1060 0.263 280 710 0.210 150
19 1680 0.370 620 1510 0.315 470 1010 0.278 280 670 0.222 150
20 1590 0.390 620 1430 0.332 470 960 0.293 280 640 0.234 150
353HTA
Ø RUN OUT
<0.02mm
Material Group
ISO 513 P1 P2 P3 P4 P5 P6
Hardness/Rm 500-700 N/mm² 600-1000 N/mm² 900-1200 N/mm² 1200-1400 N/mm²
Vc (m/min) 100-140 80-120 70-90 50-70
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
312740 0.110 1400 10620 0.099 1050 8490 0.088 750 6370 0.077 490
49550 0.130 1240 7960 0.117 930 6370 0.104 660 4780 0.091 430
57640 0.150 1150 6370 0.135 860 5100 0.120 610 3820 0.105 400
66370 0.170 1080 5310 0.153 810 4250 0.136 580 3180 0.119 380
75460 0.190 1040 4550 0.171 780 3640 0.152 550 2730 0.133 360
84780 0.210 1000 3980 0.189 750 3180 0.168 530 2390 0.147 350
94250 0.230 980 3540 0.207 730 2830 0.184 520 2120 0.161 340
10 3820 0.250 960 3180 0.225 720 2550 0.200 510 1910 0.175 330
11 3470 0.260 900 2900 0.234 680 2320 0.208 480 1740 0.182 320
12 3180 0.280 890 2650 0.252 670 2120 0.224 470 1590 0.196 310
13 2940 0.300 880 2450 0.270 660 1960 0.240 470 1470 0.210 310
14 2730 0.320 870 2270 0.288 650 1820 0.256 470 1360 0.224 300
15 2550 0.340 870 2120 0.306 650 1700 0.272 460 1270 0.238 300
16 2390 0.360 860 1990 0.324 640 1590 0.288 460 1190 0.252 300
17 2250 0.370 830 1870 0.333 620 1500 0.296 440 1120 0.259 290
18 2120 0.380 810 1770 0.342 610 1420 0.304 430 1060 0.266 280
19 2010 0.390 780 1680 0.351 590 1340 0.312 420 1010 0.273 280
20 1910 0.400 760 1590 0.360 570 1270 0.320 410 960 0.280 270
TYPHOON - high performance solid carbide drills
62
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
CUTTING PARAMETERS
353TA
Ø RUN OUT
<0.02mm
Material Group
ISO 513 M1 M2 M3 M4 M5
Hardness/Rm < 750 N/mm² 550-850 N/mm² 650-950 N/mm² 850-1200 N/mm²
Vc (m/min) 35-55 25-45 20-30 15-25
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
34780 0.070 330 3720 0.060 220 2650 0.053 140 2120 0.042 90
43580 0.077 280 2790 0.065 180 1990 0.058 110 1590 0.046 70
52870 0.084 240 2230 0.071 160 1590 0.063 100 1270 0.050 60
62390 0.095 230 1860 0.080 150 1330 0.071 90 1060 0.057 60
72050 0.105 220 1590 0.089 140 1140 0.079 90 910 0.063 60
81790 0.116 210 1390 0.098 140 1000 0.087 90 800 0.069 60
91590 0.126 200 1240 0.107 130 880 0.095 80 710 0.076 50
10 1430 0.137 200 1110 0.116 130 800 0.102 80 640 0.082 50
11 1300 0.147 190 1010 0.125 130 720 0.110 80 580 0.088 50
12 1190 0.161 190 930 0.137 130 660 0.121 80 530 0.097 50
13 1100 0.175 190 860 0.149 130 610 0.131 80 490 0.105 50
14 1020 0.189 190 800 0.161 130 570 0.142 80 450 0.113 50
15 960 0.203 190 740 0.173 130 530 0.152 80 420 0.122 50
16 900 0.217 200 700 0.184 130 500 0.163 80 400 0.130 50
17 840 0.231 190 660 0.196 130 470 0.173 80 370 0.139 50
18 800 0.245 200 620 0.208 130 440 0.184 80 350 0.147 50
19 750 0.259 190 590 0.220 130 420 0.194 80 340 0.155 50
20 720 0.273 200 560 0.232 130 400 0.205 80 320 0.164 50
353HTA
Ø RUN OUT
<0.02mm
Material Group
ISO 513 M1 M2 M3 M4 M5
Hardness/Rm < 750 N/mm² 550-850 N/mm² 650-950 N/mm² 850-1200 N/mm²
Vc (m/min) 40-60 30-50 25-35 15-25
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
35310 0.070 370 4250 0.056 240 3180 0.049 160 2120 0.042 90
43980 0.090 360 3180 0.072 230 2390 0.063 150 1590 0.054 90
53180 0.100 320 2550 0.080 200 1910 0.070 130 1270 0.060 80
62650 0.110 290 2120 0.088 190 1590 0.077 120 1060 0.066 70
72270 0.130 300 1820 0.104 190 1360 0.091 120 910 0.078 70
81990 0.150 300 1590 0.120 190 1190 0.105 120 800 0.090 70
91770 0.160 280 1420 0.128 180 1060 0.112 120 710 0.096 70
10 1590 0.175 280 1270 0.140 180 960 0.123 120 640 0.105 70
11 1450 0.180 260 1160 0.144 170 870 0.126 110 580 0.108 60
12 1330 0.200 270 1060 0.160 170 800 0.140 110 530 0.120 60
13 1220 0.215 260 980 0.172 170 730 0.151 110 490 0.129 60
14 1140 0.230 260 910 0.184 170 680 0.161 110 450 0.138 60
15 1060 0.245 260 850 0.196 170 640 0.172 110 420 0.147 60
16 1000 0.260 260 800 0.208 170 600 0.182 110 400 0.156 60
17 940 0.270 250 750 0.216 160 560 0.189 110 370 0.162 60
18 880 0.285 250 710 0.228 160 530 0.200 110 350 0.171 60
19 840 0.300 250 670 0.240 160 500 0.210 110 340 0.180 60
20 800 0.310 250 640 0.248 160 480 0.217 100 320 0.186 60
TYPHOON - high performance solid carbide drills
63
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
CUTTING PARAMETERS
353TA
Ø RUN OUT
<0.02mm
Material Group
ISO 513 K1 K2 K3 K4
Hardness/Rm 150-250 HB 150-350 HB 120-260 HB 250-500 HB
Vc (m/min) 90-110 80-100 50-70 30-50
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
310620 0.100 1060 9550 0.085 810 6370 0.075 480 4250 0.060 260
47960 0.110 880 7170 0.094 670 4780 0.083 390 3180 0.066 210
56370 0.120 760 5730 0.102 580 3820 0.090 340 2550 0.072 180
65310 0.135 720 4780 0.115 550 3180 0.101 320 2120 0.081 170
74550 0.150 680 4090 0.128 520 2730 0.113 310 1820 0.090 160
83980 0.165 660 3580 0.140 500 2390 0.124 300 1590 0.099 160
93540 0.180 640 3180 0.153 490 2120 0.135 290 1420 0.108 150
10 3180 0.195 620 2870 0.166 480 1910 0.146 280 1270 0.117 150
11 2900 0.210 610 2610 0.179 470 1740 0.158 270 1160 0.126 150
12 2650 0.230 610 2390 0.196 470 1590 0.173 270 1060 0.138 150
13 2450 0.250 610 2200 0.213 470 1470 0.188 280 980 0.150 150
14 2270 0.270 610 2050 0.230 470 1360 0.203 280 910 0.162 150
15 2120 0.290 610 1910 0.247 470 1270 0.218 280 850 0.174 150
16 1990 0.310 620 1790 0.264 470 1190 0.233 280 800 0.186 150
17 1870 0.330 620 1690 0.281 470 1120 0.248 280 750 0.198 150
18 1770 0.350 620 1590 0.298 470 1060 0.263 280 710 0.210 150
19 1680 0.370 620 1510 0.315 470 1010 0.278 280 670 0.222 150
20 1590 0.390 620 1430 0.332 470 960 0.293 280 640 0.234 150
353HTA
Ø RUN OUT
<0.02mm
Material Group
ISO 513 K1 K2 K3 K4
Hardness/Rm 150-250 HB 150-350 HB 120-260 HB 250-500 HB
Vc (m/min) 100-120 80-100 60-80 50-70
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
311680 0.110 1280 9550 0.099 950 7430 0.088 650 6370 0.077 490
48760 0.130 1140 7170 0.117 840 5570 0.104 580 4780 0.091 430
57010 0.150 1050 5730 0.135 770 4460 0.120 540 3820 0.105 400
65840 0.170 990 4780 0.153 730 3720 0.136 510 3180 0.119 380
75000 0.190 950 4090 0.171 700 3180 0.152 480 2730 0.133 360
84380 0.210 920 3580 0.189 680 2790 0.168 470 2390 0.147 350
93890 0.230 890 3180 0.207 660 2480 0.184 460 2120 0.161 340
10 3500 0.250 880 2870 0.225 650 2230 0.200 450 1910 0.175 330
11 3180 0.260 830 2610 0.234 610 2030 0.208 420 1740 0.182 320
12 2920 0.280 820 2390 0.252 600 1860 0.224 420 1590 0.196 310
13 2690 0.300 810 2200 0.270 590 1710 0.240 410 1470 0.210 310
14 2500 0.320 800 2050 0.288 590 1590 0.256 410 1360 0.224 300
15 2340 0.340 800 1910 0.306 580 1490 0.272 410 1270 0.238 300
16 2190 0.360 790 1790 0.324 580 1390 0.288 400 1190 0.252 300
17 2060 0.370 760 1690 0.333 560 1310 0.296 390 1120 0.259 290
18 1950 0.380 740 1590 0.342 540 1240 0.304 380 1060 0.266 280
19 1840 0.390 720 1510 0.351 530 1170 0.312 370 1010 0.273 280
20 1750 0.400 700 1430 0.360 510 1110 0.320 360 960 0.280 270
TYPHOON - high performance solid carbide drills
64
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
CUTTING PARAMETERS
353HTA
Ø RUN OUT
<0.02mm
Material Group
ISO 513 N1 > 5% Si N2 N4
Hardness/Rm
Vc (m/min) 180-220 160-200 160-180
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
321230 0.132 2800 19110 0.119 2270 18050 0.119 2140
415920 0.156 2480 14330 0.140 2010 13540 0.140 1900
512740 0.180 2290 11460 0.162 1860 10830 0.162 1750
610620 0.204 2170 9550 0.184 1750 9020 0.184 1660
79100 0.228 2070 8190 0.205 1680 7730 0.205 1590
87960 0.252 2010 7170 0.227 1630 6770 0.227 1540
97080 0.276 1950 6370 0.248 1580 6020 0.248 1500
10 6370 0.300 1910 5730 0.270 1550 5410 0.270 1460
11 5790 0.312 1810 5210 0.281 1460 4920 0.281 1380
12 5310 0.336 1780 4780 0.302 1450 4510 0.302 1360
13 4900 0.360 1760 4410 0.324 1430 4160 0.324 1350
14 4550 0.384 1750 4090 0.346 1410 3870 0.346 1340
15 4250 0.408 1730 3820 0.367 1400 3610 0.367 1330
16 3980 0.432 1720 3580 0.389 1390 3380 0.389 1310
17 3750 0.444 1670 3370 0.400 1350 3180 0.400 1270
18 3540 0.456 1610 3180 0.410 1310 3010 0.410 1240
19 3350 0.468 1570 3020 0.421 1270 2850 0.421 1200
20 3180 0.480 1530 2870 0.432 1240 2710 0.432 1170
TYPHOON - high performance solid carbide drills
65
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
CUTTING PARAMETERS
353TA
Ø RUN OUT
<0.02mm
Material Group
ISO 513 S1 S2 S3 S4 S5
Hardness/Rm < 35 HRC 35-45 HRC
Vc (m/min) 25-35 15-25 30-40 20-30
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
33180 0.045 140 2120 0.032 70 3720 0.043 160 2650 0.036 100
42390 0.050 120 1590 0.035 60 2790 0.047 130 1990 0.040 80
51910 0.054 100 1270 0.038 50 2230 0.051 110 1590 0.043 70
61590 0.061 100 1060 0.043 50 1860 0.058 110 1330 0.049 60
71360 0.068 90 910 0.047 40 1590 0.064 100 1140 0.054 60
81190 0.074 90 800 0.052 40 1390 0.071 100 1000 0.059 60
91060 0.081 90 710 0.057 40 1240 0.077 100 880 0.065 60
10 960 0.088 80 640 0.061 40 1110 0.083 90 800 0.070 60
11 870 0.095 80 580 0.066 40 1010 0.090 90 720 0.076 50
12 800 0.104 80 530 0.072 40 930 0.098 90 660 0.083 50
13 730 0.113 80 490 0.079 40 860 0.107 90 610 0.090 50
14 680 0.122 80 450 0.085 40 800 0.115 90 570 0.097 60
15 640 0.131 80 420 0.091 40 740 0.124 90 530 0.104 60
16 600 0.140 80 400 0.098 40 700 0.133 90 500 0.112 60
17 560 0.149 80 370 0.104 40 660 0.141 90 470 0.119 60
18 530 0.158 80 350 0.110 40 620 0.150 90 440 0.126 60
19 500 0.167 80 340 0.117 40 590 0.158 90 420 0.133 60
20 480 0.176 80 320 0.123 40 560 0.167 90 400 0.140 60
353HTA
Ø RUN OUT
<0.02mm
Material Group
ISO 513 S1 S2 S3 S4 S5
Hardness/Rm < 35 HRC 35-45 HRC
Vc (m/min) 30-40 20-30 40-60 30-40
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
33720 0.046 170 2650 0.032 90 5310 0.044 230 3720 0.037 140
42790 0.055 150 1990 0.039 80 3980 0.052 210 2790 0.044 120
52230 0.063 140 1590 0.044 70 3180 0.060 190 2230 0.050 110
61860 0.073 140 1330 0.051 70 2650 0.069 180 1860 0.058 110
71590 0.080 130 1140 0.056 60 2270 0.076 170 1590 0.064 100
81390 0.090 130 1000 0.063 60 1990 0.086 170 1390 0.072 100
91240 0.100 120 880 0.070 60 1770 0.095 170 1240 0.080 100
10 1110 0.110 120 800 0.077 60 1590 0.105 170 1110 0.088 100
11 1010 0.120 120 720 0.084 60 1450 0.114 170 1010 0.096 100
12 930 0.130 120 660 0.091 60 1330 0.124 160 930 0.104 100
13 860 0.137 120 610 0.096 60 1220 0.130 160 860 0.110 90
14 800 0.145 120 570 0.102 60 1140 0.138 160 800 0.116 90
15 740 0.153 110 530 0.107 60 1060 0.145 150 740 0.122 90
16 700 0.160 110 500 0.112 60 1000 0.152 150 700 0.128 90
17 660 0.170 110 470 0.119 60 940 0.162 150 660 0.136 90
18 620 0.180 110 440 0.126 60 880 0.171 150 620 0.144 90
19 590 0.190 110 420 0.133 60 840 0.181 150 590 0.152 90
20 560 0.200 110 400 0.140 60 800 0.190 150 560 0.160 90
TYPHOON - high performance solid carbide drills
66
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
h stock standard f non-standard stock m stock exhaustion
D(m7) D Tol. d(h6) l l1 L EDP No. Stock EDP No. Stock
3.00 +0.012/+0.002 6 23 28 66 355TA0300 h355HTA0300 h
3.10 +0.016/+0.004 6 23 28 66 355TA0310 h355HTA0310 h
3.20 +0.016/+0.004 6 23 28 66 355TA0320 h355HTA0320 h
3.30 +0.016/+0.004 6 23 28 66 355TA0330 h355HTA0330 h
3.40 +0.016/+0.004 6 23 28 66 355TA0340 h355HTA0340 h
3.50 +0.016/+0.004 6 23 28 66 355TA0350 h355HTA0350 h
3.60 +0.016/+0.004 6 23 28 66 355TA0360 h355HTA0360 h
3.70 +0.016/+0.004 6 23 28 66 355TA0370 h355HTA0370 h
3.80 +0.016/+0.004 6 29 36 74 355TA0380 h355HTA0380 h
3.90 +0.016/+0.004 6 29 36 74 355TA0390 h355HTA0390 h
4.00 +0.016/+0.004 6 29 36 74 355TA0400 h355HTA0400 h
4.10 +0.016/+0.004 6 29 36 74 355TA0410 h355HTA0410 h
4.20 +0.016/+0.004 6 29 36 74 355TA0420 h355HTA0420 h
4.30 +0.016/+0.004 6 29 36 74 355TA0430 h355HTA0430 h
4.40 +0.016/+0.004 6 29 36 74 355TA0440 h355HTA0440 h
4.50 +0.016/+0.004 6 29 36 74 355TA0450 h355HTA0450 h
4.60 +0.016/+0.004 6 29 36 74 355TA0460 h355HTA0460 h
4.70 +0.016/+0.004 6 29 36 74 355TA0470 h355HTA0470 h
4.80 +0.016/+0.004 6 35 44 82 355TA0480 h355HTA0480 h
4.90 +0.016/+0.004 6 35 44 82 355TA0490 h355HTA0490 h
5.00 +0.016/+0.004 6 35 44 82 355TA0500 h355HTA0500 h
5.10 +0.016/+0.004 6 35 44 82 355TA0510 h355HTA0510 h
5.20 +0.016/+0.004 6 35 44 82 355TA0520 h355HTA0520 h
5.30 +0.016/+0.004 6 35 44 82 355TA0530 h355HTA0530 h
5.40 +0.016/+0.004 6 35 44 82 355TA0540 h355HTA0540 h
5.50 +0.016/+0.004 6 35 44 82 355TA0550 h355HTA0550 h
5.60 +0.016/+0.004 6 35 44 82 355TA0560 h355HTA0560 h
5.70 +0.016/+0.004 6 35 44 82 355TA0570 h355HTA0570 h
5.80 +0.016/+0.004 6 35 44 82 355TA0580 h355HTA0580 h
5.90 +0.016/+0.004 6 35 44 82 355TA0590 h355HTA0590 h
6.00 +0.016/+0.004 6 35 44 82 355TA0600 h355HTA0600 h
6.10 +0.021/+0.006 8 43 53 91 355TA0610 h355HTA0610 h
6.20 +0.021/+0.006 8 43 53 91 355TA0620 h355HTA0620 h
6.30 +0.021/+0.006 8 43 53 91 355TA0630 h355HTA0630 h
6.40 +0.021/+0.006 8 43 53 91 355TA0640 h355HTA0640 h
6.50 +0.021/+0.006 8 43 53 91 355TA0650 h355HTA0650 h
6.60 +0.021/+0.006 8 43 53 91 355TA0660 h355HTA0660 h
6.70 +0.021/+0.006 8 43 53 91 355TA0670 h355HTA0670 h
6.80 +0.021/+0.006 8 43 53 91 355TA0680 h355HTA0680 h
355TA-355HTA
general purpose, TA and HTA (through coolant)
5XD DIN
6537L
355TA 355HTA
355TA
355HTA
PMKNSH
+,, , 355TA
+,,,, 355HTA
+ 1st choice , suitable
355TA 355HTA
355TA
355HTA
TYPHOON - high performance solid carbide drills
67
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
355TA-355HTA
general purpose, TA and HTA (through coolant)
5XD DIN
6537L
355TA 355HTA
355TA
355HTA
PMKNSH
+,, , 355TA
+,,,, 355HTA
+ 1st choice , suitable
355TA 355HTA
355TA
355HTA
h stock standard f non-standard stock m stock exhaustion
D(m7) D Tol. d(h6) l l1 L EDP No. Stock EDP No. Stock
6.90 +0.021/+0.006 8 43 53 91 355TA0690 h355HTA0690 h
7.00 +0.021/+0.006 8 43 53 91 355TA0700 h355HTA0700 h
7.10 +0.021/+0.006 8 43 53 91 355TA0710 h355HTA0710 h
7.20 +0.021/+0.006 8 43 53 91 355TA0720 h355HTA0720 h
7.30 +0.021/+0.006 8 43 53 91 355TA0730 h355HTA0730 h
7.40 +0.021/+0.006 8 43 53 91 355TA0740 h355HTA0740 h
7.50 +0.021/+0.006 8 43 53 91 355TA0750 h355HTA0750 h
7.60 +0.021/+0.006 8 43 53 91 355TA0760 h355HTA0760 h
7.70 +0.021/+0.006 8 43 53 91 355TA0770 h355HTA0770 h
7.80 +0.021/+0.006 8 43 53 91 355TA0780 h355HTA0780 h
7.90 +0.021/+0.006 8 43 53 91 355TA0790 h355HTA0790 h
8.00 +0.021/+0.006 8 43 53 91 355TA0800 h355HTA0800 h
8.10 +0.021/+0.006 10 49 61 103 355TA0810 h355HTA0810 h
8.20 +0.021/+0.006 10 49 61 103 355TA0820 h355HTA0820 h
8.30 +0.021/+0.006 10 49 61 103 355TA0830 h355HTA0830 h
8.40 +0.021/+0.006 10 49 61 103 355TA0840 h355HTA0840 h
8.50 +0.021/+0.006 10 49 61 103 355TA0850 h355HTA0850 h
8.60 +0.021/+0.006 10 49 61 103 355TA0860 h355HTA0860 h
8.70 +0.021/+0.006 10 49 61 103 355TA0870 h355HTA0870 h
8.80 +0.021/+0.006 10 49 61 103 355TA0880 h355HTA0880 h
8.90 +0.021/+0.006 10 49 61 103 355TA0890 h355HTA0890 h
9.00 +0.021/+0.006 10 49 61 103 355TA0900 h355HTA0900 h
9.10 +0.021/+0.006 10 49 61 103 355TA0910 h355HTA0910 h
9.20 +0.021/+0.006 10 49 61 103 355TA0920 h355HTA0920 h
9.30 +0.021/+0.006 10 49 61 103 355TA0930 h355HTA0930 h
9.40 +0.021/+0.006 10 49 61 103 355TA0940 h355HTA0940 h
9.50 +0.021/+0.006 10 61 61 103 355TA0950 h355HTA0950 h
9.60 +0.021/+0.006 10 61 61 103 355TA0960 h355HTA0960 h
9.70 +0.021/+0.006 10 61 61 103 355TA0970 h355HTA0970 h
9.80 +0.021/+0.006 10 61 61 103 355TA0980 h355HTA0980 h
9.90 +0.021/+0.006 10 61 61 103 355TA0990 h355HTA0990 h
10.00 +0.021/+0.006 10 61 61 103 355TA1000 h355HTA1000 h
10.10 +0.025/+0.007 12 71 71 118 355TA1010 h
10.20 +0.025/+0.007 12 71 71 118 355TA1020 h355HTA1020 h
10.30 +0.025/+0.007 12 71 71 118 355TA1030 h
10.40 +0.025/+0.007 12 71 71 118 355TA1040 f
10.50 +0.025/+0.007 12 71 71 118 355TA1050 h355HTA1050 h
10.60 +0.025/+0.007 12 71 71 118 355TA1060 h
10.70 +0.025/+0.007 12 71 71 118 355TA1070 h
TYPHOON - high performance solid carbide drills
68
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
h stock standard f non-standard stock m stock exhaustion
D(m7) D Tol. d(h6) l l1 L EDP No. Stock EDP No. Stock
10.80 +0.025/+0.007 12 71 71 118 355TA1080 h355HTA1080 h
10.90 +0.025/+0.007 12 71 71 118 355TA1090 f355HTA1090 f
11.00 +0.025/+0.007 12 71 71 118 355TA1100 h355HTA1100 h
11.10 +0.025/+0.007 12 71 71 118 355TA1110 f
11.20 +0.025/+0.007 12 71 71 118 355TA1120 h355HTA1120 h
11.30 +0.025/+0.007 12 71 71 118 355TA1130 h355HTA1130 h
11.40 +0.025/+0.007 12 71 71 118 355TA1140 h
11.50 +0.025/+0.007 12 71 71 118 355TA1150 h355HTA1150 h
11.60 +0.025/+0.007 12 71 71 118 355TA1160 f
11.70 +0.025/+0.007 12 71 71 118 355TA1170 h
11.80 +0.025/+0.007 12 71 71 118 355TA1180 h355HTA1180 h
11.90 +0.025/+0.007 12 71 71 118 355TA1190 f
12.00 +0.025/+0.007 12 71 71 118 355TA1200 h355HTA1200 h
12.20 +0.025/+0.007 14 77 77 124 355TA1220 h355HTA1220 h
12.50 +0.025/+0.007 14 77 77 124 355TA1250 h355HTA1250 h
12.80 +0.025/+0.007 14 77 77 124 355HTA1280 h
13.00 +0.025/+0.007 14 77 77 124 355TA1300 h355HTA1300 h
13.30 +0.025/+0.007 14 77 77 124 355HTA1330 h
13.50 +0.025/+0.007 14 77 77 124 355TA1350 h355HTA1350 h
13.80 +0.025/+0.007 14 77 77 124 355HTA1380 h
14.00 +0.025/+0.007 14 77 77 124 355TA1400 h355HTA1400 h
14.50 +0.025/+0.007 16 83 83 133 355TA1450 h355HTA1450 h
15.00 +0.025/+0.007 16 83 83 133 355TA1500 h355HTA1500 h
15.30 +0.025/+0.007 16 83 83 133 355HTA1530 h
15.50 +0.025/+0.007 16 83 83 133 355TA1550 h355HTA1550 h
15.80 +0.025/+0.007 16 83 83 133 355HTA1580 h
16.00 +0.025/+0.007 16 83 83 133 355TA1600 h355HTA1600 h
16.50 +0.025/+0.007 18 93 93 143 355TA1650 h355HTA1650 h
17.00 +0.025/+0.007 18 93 93 143 355TA1700 h355HTA1700 h
17.50 +0.025/+0.007 18 93 93 143 355TA1750 h355HTA1750 h
18.00 +0.025/+0.007 18 93 93 143 355TA1800 h355HTA1800 h
18.50 +0.029/+0.008 20 101 101 153 355TA1850 h355HTA1850 h
19.00 +0.029/+0.008 20 101 101 153 355TA1900 h355HTA1900 h
19.50 +0.029/+0.008 20 101 101 153 355TA1950 f355HTA1950 h
20.00 +0.029/+0.008 20 101 101 153 355TA2000 h355HTA2000 h
355TA-355HTA
general purpose, TA and HTA (through coolant)
5XD DIN
6537L
355TA 355HTA
355TA
355HTA
PMKNSH
+,, , 355TA
+,,,, 355HTA
+ 1st choice , suitable
355TA 355HTA
355TA
355HTA
TYPHOON - high performance solid carbide drills
69
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
CUTTING PARAMETERS
355TA
Ø RUN OUT
<0.02mm
Material Group
ISO 513 P1 P2 P3 P4 P5 P6
Hardness/Rm 500-700 N/mm² 600-1000 N/mm² 900-1200 N/mm² 1200-1400 N/mm²
Vc (m/min) 80-100 70-90 40-60 20-40
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
39550 0.085 810 8490 0.068 580 5310 0.060 320 3180 0.043 140
47170 0.094 670 6370 0.075 480 3980 0.065 260 2390 0.047 110
55730 0.102 580 5100 0.082 420 3180 0.071 230 1910 0.051 100
64780 0.115 550 4250 0.092 390 2650 0.080 210 1590 0.057 90
74090 0.128 520 3640 0.102 370 2270 0.089 200 1360 0.064 90
83580 0.140 500 3180 0.112 360 1990 0.098 200 1190 0.070 80
93180 0.153 490 2830 0.122 350 1770 0.107 190 1060 0.077 80
10 2870 0.166 480 2550 0.133 340 1590 0.116 180 960 0.083 80
11 2610 0.179 470 2320 0.143 330 1450 0.125 180 870 0.089 80
12 2390 0.196 470 2120 0.156 330 1330 0.137 180 800 0.098 80
13 2200 0.213 470 1960 0.170 330 1220 0.149 180 730 0.106 80
14 2050 0.230 470 1820 0.184 330 1140 0.161 180 680 0.115 80
15 1910 0.247 470 1700 0.197 340 1060 0.173 180 640 0.123 80
16 1790 0.264 470 1590 0.211 340 1000 0.184 180 600 0.132 80
17 1690 0.281 470 1500 0.224 340 940 0.196 180 560 0.140 80
18 1590 0.298 470 1420 0.238 340 880 0.208 180 530 0.149 80
19 1510 0.315 470 1340 0.252 340 840 0.220 180 500 0.157 80
20 1430 0.332 470 1270 0.265 340 800 0.232 190 480 0.166 80
355HTA
Ø RUN OUT
<0.02mm
Material Group
ISO 513 P1 P2 P3 P4 P5 P6
Hardness/Rm 500-700 N/mm² 600-1000 N/mm² 900-1200 N/mm² 1200-1400 N/mm²
Vc (m/min) 100-120 80-100 60-80 40-60
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
311680 0.094 1090 9550 0.070 670 7430 0.056 420 5310 0.047 250
48760 0.111 970 7170 0.083 590 5570 0.066 370 3980 0.055 220
57010 0.128 890 5730 0.096 550 4460 0.077 340 3180 0.064 200
65840 0.145 840 4780 0.108 520 3720 0.087 320 2650 0.072 190
75000 0.162 810 4090 0.121 500 3180 0.097 310 2270 0.081 180
84380 0.179 780 3580 0.134 480 2790 0.107 300 1990 0.089 180
93890 0.196 760 3180 0.147 470 2480 0.117 290 1770 0.098 170
10 3500 0.213 740 2870 0.159 460 2230 0.128 280 1590 0.106 170
11 3180 0.221 700 2610 0.166 430 2030 0.133 270 1450 0.111 160
12 2920 0.238 690 2390 0.179 430 1860 0.143 270 1330 0.119 160
13 2690 0.255 690 2200 0.191 420 1710 0.153 260 1220 0.128 160
14 2500 0.272 680 2050 0.204 420 1590 0.163 260 1140 0.136 160
15 2340 0.289 680 1910 0.217 410 1490 0.173 260 1060 0.145 150
16 2190 0.306 670 1790 0.230 410 1390 0.184 260 1000 0.153 150
17 2060 0.315 650 1690 0.236 400 1310 0.189 250 940 0.157 150
18 1950 0.323 630 1590 0.242 390 1240 0.194 240 880 0.162 140
19 1840 0.332 610 1510 0.249 380 1170 0.199 230 840 0.166 140
20 1750 0.340 600 1430 0.255 360 1110 0.204 230 800 0.170 140
TYPHOON - high performance solid carbide drills
70
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
CUTTING PARAMETERS
355TA
Ø RUN OUT
<0.02mm
Material Group
ISO 513 M1 M2 M3 M4 M5
Hardness/Rm < 750 N/mm² 550-850 N/mm² 650-950 N/mm² 850-1200 N/mm²
Vc (m/min) 30-50 25-35 20-30 15-25
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
34250 0.060 250 3180 0.048 150 2650 0.042 110 2120 0.030 60
43180 0.065 210 2390 0.052 130 1990 0.046 90 1590 0.033 50
52550 0.071 180 1910 0.057 110 1590 0.050 80 1270 0.036 50
62120 0.080 170 1590 0.064 100 1330 0.056 70 1060 0.040 40
71820 0.089 160 1360 0.071 100 1140 0.062 70 910 0.045 40
81590 0.098 160 1190 0.079 90 1000 0.069 70 800 0.049 40
91420 0.107 150 1060 0.086 90 880 0.075 70 710 0.054 40
10 1270 0.116 150 960 0.093 90 800 0.081 60 640 0.058 40
11 1160 0.125 140 870 0.100 90 720 0.087 60 580 0.062 40
12 1060 0.137 150 800 0.109 90 660 0.096 60 530 0.068 40
13 980 0.149 150 730 0.119 90 610 0.104 60 490 0.074 40
14 910 0.161 150 680 0.129 90 570 0.112 60 450 0.080 40
15 850 0.173 150 640 0.138 90 530 0.121 60 420 0.086 40
16 800 0.184 150 600 0.148 90 500 0.129 60 400 0.092 40
17 750 0.196 150 560 0.157 90 470 0.137 60 370 0.098 40
18 710 0.208 150 530 0.167 90 440 0.146 60 350 0.104 40
19 670 0.220 150 500 0.176 90 420 0.154 60 340 0.110 40
20 640 0.232 150 480 0.186 90 400 0.162 60 320 0.116 40
355HTA
Ø RUN OUT
<0.02mm
Material Group
ISO 513 M1 M2 M3 M4 M5
Hardness/Rm < 750 N/mm² 550-850 N/mm² 650-950 N/mm² 850-1200 N/mm²
Vc (m/min) 30-50 25-35 20-30 10-20
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
34250 0.060 250 3180 0.048 150 2650 0.042 110 1590 0.036 60
43180 0.077 240 2390 0.061 150 1990 0.054 110 1190 0.046 50
52550 0.085 220 1910 0.068 130 1590 0.060 90 960 0.051 50
62120 0.094 200 1590 0.075 120 1330 0.065 90 800 0.056 40
71820 0.111 200 1360 0.088 120 1140 0.077 90 680 0.066 50
81590 0.128 200 1190 0.102 120 1000 0.089 90 600 0.077 50
91420 0.136 190 1060 0.109 120 880 0.095 80 530 0.082 40
10 1270 0.149 190 960 0.119 110 800 0.104 80 480 0.089 40
11 1160 0.153 180 870 0.122 110 720 0.107 80 430 0.092 40
12 1060 0.170 180 800 0.136 110 660 0.119 80 400 0.102 40
13 980 0.183 180 730 0.146 110 610 0.128 80 370 0.110 40
14 910 0.196 180 680 0.156 110 570 0.137 80 340 0.117 40
15 850 0.208 180 640 0.167 110 530 0.146 80 320 0.125 40
16 800 0.221 180 600 0.177 110 500 0.155 80 300 0.133 40
17 750 0.230 170 560 0.184 100 470 0.161 80 280 0.138 40
18 710 0.242 170 530 0.194 100 440 0.170 70 270 0.145 40
19 670 0.255 170 500 0.204 100 420 0.179 70 250 0.153 40
20 640 0.264 170 480 0.211 100 400 0.184 70 240 0.158 40
TYPHOON - high performance solid carbide drills
71
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
CUTTING PARAMETERS
355TA
Ø RUN OUT
<0.02mm
Material Group
ISO 513 K1 K2 K3 K4
Hardness/Rm 150-250 HB 150-350 HB 120-260 HB 250-500 HB
Vc (m/min) 80-100 70-90 40-60 20-40
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
39550 0.085 810 8490 0.068 580 5310 0.060 320 3180 0.043 140
47170 0.094 670 6370 0.075 480 3980 0.065 260 2390 0.047 110
55730 0.102 580 5100 0.082 420 3180 0.071 230 1910 0.051 100
64780 0.115 550 4250 0.092 390 2650 0.080 210 1590 0.057 90
74090 0.128 520 3640 0.102 370 2270 0.089 200 1360 0.064 90
83580 0.140 500 3180 0.112 360 1990 0.098 200 1190 0.070 80
93180 0.153 490 2830 0.122 350 1770 0.107 190 1060 0.077 80
10 2870 0.166 480 2550 0.133 340 1590 0.116 180 960 0.083 80
11 2610 0.179 470 2320 0.143 330 1450 0.125 180 870 0.089 80
12 2390 0.196 470 2120 0.156 330 1330 0.137 180 800 0.098 80
13 2200 0.213 470 1960 0.170 330 1220 0.149 180 730 0.106 80
14 2050 0.230 470 1820 0.184 330 1140 0.161 180 680 0.115 80
15 1910 0.247 470 1700 0.197 340 1060 0.173 180 640 0.123 80
16 1790 0.264 470 1590 0.211 340 1000 0.184 180 600 0.132 80
17 1690 0.281 470 1500 0.224 340 940 0.196 180 560 0.140 80
18 1590 0.298 470 1420 0.238 340 880 0.208 180 530 0.149 80
19 1510 0.315 470 1340 0.252 340 840 0.220 180 500 0.157 80
20 1430 0.332 470 1270 0.265 340 800 0.232 190 480 0.166 80
355HTA
Ø RUN OUT
<0.02mm
Material Group
ISO 513 K1 K2 K3 K4
Hardness/Rm 150-250 HB 150-350 HB 120-260 HB 250-500 HB
Vc (m/min) 90-110 70-90 50-70 40-60
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
310620 0.094 990 8490 0.084 710 6370 0.075 480 5310 0.065 350
47960 0.111 880 6370 0.099 630 4780 0.088 420 3980 0.077 310
56370 0.128 810 5100 0.115 590 3820 0.102 390 3180 0.089 280
65310 0.145 770 4250 0.130 550 3180 0.116 370 2650 0.101 270
74550 0.162 730 3640 0.145 530 2730 0.129 350 2270 0.113 260
83980 0.179 710 3180 0.161 510 2390 0.143 340 1990 0.125 250
93540 0.196 690 2830 0.176 500 2120 0.156 330 1770 0.137 240
10 3180 0.213 680 2550 0.191 490 1910 0.170 320 1590 0.149 240
11 2900 0.221 640 2320 0.199 460 1740 0.177 310 1450 0.155 220
12 2650 0.238 630 2120 0.214 450 1590 0.190 300 1330 0.167 220
13 2450 0.255 620 1960 0.230 450 1470 0.204 300 1220 0.179 220
14 2270 0.272 620 1820 0.245 450 1360 0.218 300 1140 0.190 220
15 2120 0.289 610 1700 0.260 440 1270 0.231 290 1060 0.202 210
16 1990 0.306 610 1590 0.275 440 1190 0.245 290 1000 0.214 210
17 1870 0.315 590 1500 0.283 420 1120 0.252 280 940 0.220 210
18 1770 0.323 570 1420 0.291 410 1060 0.258 270 880 0.226 200
19 1680 0.332 560 1340 0.298 400 1010 0.265 270 840 0.232 190
20 1590 0.340 540 1270 0.306 390 960 0.272 260 800 0.238 190
TYPHOON - high performance solid carbide drills
72
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
CUTTING PARAMETERS
355HTA
Ø RUN OUT
<0.02mm
Material Group
ISO 513 N1 > 5% Si N2 N4
Hardness/Rm
Vc (m/min) 180-220 160-200 160-180
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
321230 0.112 2380 19110 0.101 1930 18050 0.090 1620
415920 0.133 2110 14330 0.119 1710 13540 0.106 1440
512740 0.153 1950 11460 0.138 1580 10830 0.122 1330
610620 0.173 1840 9550 0.156 1490 9020 0.139 1250
79100 0.194 1760 8190 0.174 1430 7730 0.155 1200
87960 0.214 1710 7170 0.193 1380 6770 0.171 1160
97080 0.235 1660 6370 0.211 1340 6020 0.188 1130
10 6370 0.255 1620 5730 0.230 1320 5410 0.204 1100
11 5790 0.265 1540 5210 0.239 1240 4920 0.212 1040
12 5310 0.286 1520 4780 0.257 1230 4510 0.228 1030
13 4900 0.306 1500 4410 0.275 1210 4160 0.245 1020
14 4550 0.326 1490 4090 0.294 1200 3870 0.261 1010
15 4250 0.347 1470 3820 0.312 1190 3610 0.277 1000
16 3980 0.367 1460 3580 0.330 1180 3380 0.294 990
17 3750 0.377 1420 3370 0.340 1140 3180 0.302 960
18 3540 0.388 1370 3180 0.349 1110 3010 0.310 930
19 3350 0.398 1330 3020 0.358 1080 2850 0.318 910
20 3180 0.408 1300 2870 0.367 1050 2710 0.326 880
TYPHOON - high performance solid carbide drills
73
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
CUTTING PARAMETERS
355TA
Ø RUN OUT
<0.02mm
Material Group
ISO 513 S1 S2 S3 S4 S5
Hardness/Rm < 35 HRC 35-45 HRC
Vc (m/min) 20-30 10-20 25-35 15-25
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
32650 0.038 100 1590 0.027 40 3180 0.036 120 2120 0.031 60
41990 0.042 80 1190 0.029 40 2390 0.040 100 1590 0.034 50
51590 0.046 70 960 0.032 30 1910 0.044 80 1270 0.037 50
61330 0.052 70 800 0.036 30 1590 0.049 80 1060 0.041 40
71140 0.057 70 680 0.040 30 1360 0.055 70 910 0.046 40
81000 0.063 60 600 0.044 30 1190 0.060 70 800 0.050 40
9880 0.069 60 530 0.048 30 1060 0.065 70 710 0.055 40
10 800 0.075 60 480 0.052 30 960 0.071 70 640 0.060 40
11 720 0.080 60 430 0.056 20 870 0.076 70 580 0.064 40
12 660 0.088 60 400 0.062 20 800 0.084 70 530 0.070 40
13 610 0.096 60 370 0.067 20 730 0.091 70 490 0.077 40
14 570 0.103 60 340 0.072 20 680 0.098 70 450 0.083 40
15 530 0.111 60 320 0.078 20 640 0.105 70 420 0.089 40
16 500 0.119 60 300 0.083 20 600 0.113 70 400 0.095 40
17 470 0.126 60 280 0.088 20 560 0.120 70 370 0.101 40
18 440 0.134 60 270 0.094 30 530 0.127 70 350 0.107 40
19 420 0.142 60 250 0.099 20 500 0.134 70 340 0.113 40
20 400 0.149 60 240 0.104 30 480 0.142 70 320 0.119 40
355HTA
Ø RUN OUT
<0.02mm
Material Group
ISO 513 S1 S2 S3 S4 S5
Hardness/Rm < 35 HRC 35-45 HRC
Vc (m/min) 25-35 15-25 40-50 25-35
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
33180 0.039 120 2120 0.027 60 4780 0.037 180 3180 0.031 100
42390 0.047 110 1590 0.033 50 3580 0.044 160 2390 0.037 90
51910 0.054 100 1270 0.037 50 2870 0.051 150 1910 0.043 80
61590 0.062 100 1060 0.043 50 2390 0.059 140 1590 0.050 80
71360 0.068 90 910 0.048 40 2050 0.065 130 1360 0.054 70
81190 0.077 90 800 0.054 40 1790 0.073 130 1190 0.061 70
91060 0.085 90 710 0.060 40 1590 0.081 130 1060 0.068 70
10 960 0.094 90 640 0.065 40 1430 0.089 130 960 0.075 70
11 870 0.102 90 580 0.071 40 1300 0.097 130 870 0.082 70
12 800 0.111 90 530 0.077 40 1190 0.105 120 800 0.088 70
13 730 0.116 90 490 0.082 40 1100 0.111 120 730 0.093 70
14 680 0.123 80 450 0.086 40 1020 0.117 120 680 0.099 70
15 640 0.130 80 420 0.091 40 960 0.124 120 640 0.104 70
16 600 0.136 80 400 0.095 40 900 0.129 120 600 0.109 70
17 560 0.145 80 370 0.101 40 840 0.137 120 560 0.116 60
18 530 0.153 80 350 0.107 40 800 0.145 120 530 0.122 60
19 500 0.162 80 340 0.113 40 750 0.153 120 500 0.129 60
20 480 0.170 80 320 0.119 40 720 0.162 120 480 0.136 70
TYPHOON - high performance solid carbide drills
74
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
h stock standard f non-standard stock m stock exhaustion
D(m7) D Tol. d(h6) l l1 L EDP No. Stock
3.00 +0.012/+0.002 6 32 40 85 358HTA0300 h
3.10 +0.016/+0.004 6 32 40 85 358HTA0310 h
3.20 +0.016/+0.004 6 32 40 85 358HTA0320 h
3.30 +0.016/+0.004 6 32 40 85 358HTA0330 h
3.40 +0.016/+0.004 6 32 40 85 358HTA0340 h
3.50 +0.016/+0.004 6 32 40 85 358HTA0350 h
3.60 +0.016/+0.004 6 36 40 85 358HTA0360 h
3.70 +0.016/+0.004 6 36 40 85 358HTA0370 h
3.80 +0.016/+0.004 6 36 40 85 358HTA0380 h
3.90 +0.016/+0.004 6 36 40 85 358HTA0390 f
4.00 +0.016/+0.004 6 38 46 85 358HTA0400 h
4.10 +0.016/+0.004 6 38 46 85 358HTA0410 h
4.20 +0.016/+0.004 6 38 46 85 358HTA0420 h
4.30 +0.016/+0.004 6 40 46 97 358HTA0430 h
4.40 +0.016/+0.004 6 40 46 97 358HTA0440 f
4.50 +0.016/+0.004 6 44 46 97 358HTA0450 h
4.60 +0.016/+0.004 6 44 46 97 358HTA0460 h
4.70 +0.016/+0.004 6 44 46 97 358HTA0470 h
4.80 +0.016/+0.004 6 44 46 97 358HTA0480 h
4.90 +0.016/+0.004 6 44 46 97 358HTA0490 f
5.00 +0.016/+0.004 6 48 57 97 358HTA0500 h
5.10 +0.016/+0.004 6 48 57 97 358HTA0510 h
5.20 +0.016/+0.004 6 48 57 97 358HTA0520 h
5.30 +0.016/+0.004 6 48 57 97 358HTA0530 h
5.40 +0.016/+0.004 6 48 57 97 358HTA0540 f
5.50 +0.016/+0.004 6 48 57 97 358HTA0550 h
5.60 +0.016/+0.004 6 48 57 97 358HTA0560 h
5.70 +0.016/+0.004 6 48 57 97 358HTA0570 f
5.80 +0.016/+0.004 6 48 57 97 358HTA0580 h
5.90 +0.016/+0.004 6 48 57 97 358HTA0590 h
6.00 +0.016/+0.004 6 48 57 97 358HTA0600 h
6.10 +0.021/+0.006 8 64 76 116 358HTA0610 h
6.20 +0.021/+0.006 8 64 76 116 358HTA0620 h
6.30 +0.021/+0.006 8 64 76 116 358HTA0630 h
6.40 +0.021/+0.006 8 64 76 116 358HTA0640 f
6.50 +0.021/+0.006 8 64 76 116 358HTA0650 h
6.60 +0.021/+0.006 8 64 76 116 358HTA0660 f
6.70 +0.021/+0.006 8 64 76 116 358HTA0670 h
6.80 +0.021/+0.006 8 64 76 116 358HTA0680 h
3584HTA
4-margin lands, long (8xD), 4HTA (through coolant)
8XD OSAWA
NORM
PMKNSH
+++,,
+ 1st choice , suitable
TYPHOON - high performance solid carbide drills
75
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
h stock standard f non-standard stock m stock exhaustion
D(m7) D Tol. d(h6) l l1 L EDP No. Stock
6.90 +0.021/+0.006 8 64 76 116 358HTA0690 h
7.00 +0.021/+0.006 8 64 76 116 358HTA0700 h
7.10 +0.021/+0.006 8 64 76 116 358HTA0710 h
7.20 +0.021/+0.006 8 64 76 116 358HTA0720 h
7.30 +0.021/+0.006 8 64 76 116 358HTA0730 h
7.40 +0.021/+0.006 8 64 76 116 358HTA0740 h
7.50 +0.021/+0.006 8 64 76 116 358HTA0750 h
7.60 +0.021/+0.006 8 64 76 116 358HTA0760 h
7.70 +0.021/+0.006 8 64 76 116 358HTA0770 f
7.80 +0.021/+0.006 8 64 76 116 358HTA0780 h
7.90 +0.021/+0.006 8 64 76 116 358HTA0790 f
8.00 +0.021/+0.006 8 64 76 116 358HTA0800 h
8.10 +0.021/+0.006 10 80 95 142 358HTA0810 h
8.20 +0.021/+0.006 10 80 95 142 358HTA0820 h
8.30 +0.021/+0.006 10 80 95 142 358HTA0830 h
8.40 +0.021/+0.006 10 80 95 142 358HTA0840 f
8.50 +0.021/+0.006 10 80 95 142 358HTA0850 h
8.60 +0.021/+0.006 10 80 95 142 358HTA0860 h
8.70 +0.021/+0.006 10 80 95 142 358HTA0870 h
8.80 +0.021/+0.006 10 80 95 142 358HTA0880 h
8.90 +0.021/+0.006 10 80 95 142 358HTA0890 f
9.00 +0.021/+0.006 10 80 95 142 358HTA0900 h
9.10 +0.021/+0.006 10 80 95 142 358HTA0910 h
9.20 +0.021/+0.006 10 80 95 142 358HTA0920 h
9.30 +0.021/+0.006 10 80 95 142 358HTA0930 h
9.40 +0.021/+0.006 10 80 95 142 358HTA0940 f
9.50 +0.021/+0.006 10 80 95 142 358HTA0950 h
9.60 +0.021/+0.006 10 80 95 142 358HTA0960 f
9.70 +0.021/+0.006 10 80 95 142 358HTA0970 f
9.80 +0.021/+0.006 10 80 95 142 358HTA0980 h
9.90 +0.021/+0.006 10 80 95 142 358HTA0990 f
10.00 +0.021/+0.006 10 80 95 142 358HTA1000 h
10.20 +0.025/+0.007 12 96 114 163 358HTA1020 h
10.50 +0.025/+0.007 12 96 114 163 358HTA1050 h
10.80 +0.025/+0.007 12 96 114 163 358HTA1080 h
11.00 +0.025/+0.007 12 96 114 163 358HTA1100 h
11.20 +0.025/+0.007 12 96 114 163 358HTA1120 h
11.30 +0.025/+0.007 12 96 114 163 358HTA1130 f
11.50 +0.025/+0.007 12 96 114 163 358HTA1150 h
3584HTA
4-margin lands, long (8xD), 4HTA (through coolant)
8XD OSAWA
NORM
PMKNSH
+++,,
+ 1st choice , suitable
TYPHOON - high performance solid carbide drills
76
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
h stock standard f non-standard stock m stock exhaustion
D(m7) D Tol. d(h6) l l1 L EDP No. Stock
11.80 +0.025/+0.007 12 96 114 163 358HTA1180 h
12.00 +0.025/+0.007 12 96 114 163 358HTA1200 h
12.20 +0.025/+0.007 14 112 133 182 358HTA1220 h
12.50 +0.025/+0.007 14 112 133 182 358HTA1250 h
12.80 +0.025/+0.007 14 112 133 182 358HTA1280 h
13.00 +0.025/+0.007 14 112 133 182 358HTA1300 h
13.50 +0.025/+0.007 14 112 133 182 358HTA1350 h
14.00 +0.025/+0.007 14 112 133 182 358HTA1400 h
14.50 +0.025/+0.007 16 128 152 204 358HTA1450 h
15.00 +0.025/+0.007 16 128 152 204 358HTA1500 h
15.50 +0.025/+0.007 16 128 152 204 358HTA1550 h
16.00 +0.025/+0.007 16 128 152 204 358HTA1600 h
3584HTA
4-margin lands, long (8xD), 4HTA (through coolant)
8XD OSAWA
NORM
PMKNSH
+++,,
+ 1st choice , suitable
TYPHOON - high performance solid carbide drills
77
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
CUTTING PARAMETERS
3584HTA
Ø RUN OUT
<0.02mm
Material Group
ISO 513 P1 P2 P3 P4 P5 P6
Hardness/Rm 500-700 N/mm² 600-1000 N/mm² 900-1200 N/mm² 1200-1400 N/mm²
Vc (m/min) 100-120 80-100 50-70 40-60
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
311680 0.072 840 9550 0.065 620 6370 0.058 370 5310 0.050 270
48760 0.089 780 7170 0.080 570 4780 0.071 340 3980 0.062 250
57010 0.106 740 5730 0.095 550 3820 0.085 320 3180 0.074 240
65840 0.122 710 4780 0.110 520 3180 0.098 310 2650 0.085 230
75000 0.139 700 4090 0.125 510 2730 0.111 300 2270 0.097 220
84380 0.155 680 3580 0.140 500 2390 0.124 300 1990 0.109 220
93890 0.172 670 3180 0.155 490 2120 0.138 290 1770 0.120 210
10 3500 0.188 660 2870 0.169 490 1910 0.150 290 1590 0.132 210
11 3180 0.205 650 2610 0.185 480 1740 0.164 290 1450 0.144 210
12 2920 0.221 650 2390 0.199 480 1590 0.177 280 1330 0.155 210
13 2690 0.238 640 2200 0.214 470 1470 0.190 280 1220 0.167 200
14 2500 0.254 640 2050 0.229 470 1360 0.203 280 1140 0.178 200
15 2340 0.270 630 1910 0.243 460 1270 0.216 270 1060 0.189 200
16 2190 0.286 630 1790 0.257 460 1190 0.229 270 1000 0.200 200
Ø RUN OUT
<0.02mm
Material Group
ISO 513 M1 M2 M3 M4 M5
Hardness/Rm < 750 N/mm² 550-850 N/mm² 650-950 N/mm² 850-1200 N/mm²
Vc (m/min) 40-50 30-40 20-30 15-25
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
34780 0.070 330 3720 0.056 210 2650 0.049 130 2120 0.042 90
43580 0.090 320 2790 0.072 200 1990 0.063 130 1590 0.054 90
52870 0.100 290 2230 0.080 180 1590 0.070 110 1270 0.060 80
62390 0.110 260 1860 0.088 160 1330 0.077 100 1060 0.066 70
72050 0.130 270 1590 0.104 170 1140 0.091 100 910 0.078 70
81790 0.150 270 1390 0.120 170 1000 0.105 110 800 0.090 70
91590 0.160 250 1240 0.128 160 880 0.112 100 710 0.096 70
10 1430 0.175 250 1110 0.140 160 800 0.123 100 640 0.105 70
11 1300 0.180 230 1010 0.144 150 720 0.126 90 580 0.108 60
12 1190 0.200 240 930 0.160 150 660 0.140 90 530 0.120 60
13 1100 0.215 240 860 0.172 150 610 0.151 90 490 0.129 60
14 1020 0.230 230 800 0.184 150 570 0.161 90 450 0.138 60
15 960 0.245 240 740 0.196 150 530 0.172 90 420 0.147 60
16 900 0.260 230 700 0.208 150 500 0.182 90 400 0.156 60
TYPHOON - high performance solid carbide drills
78
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
CUTTING PARAMETERS
3584HTA
Ø RUN OUT
<0.02mm
Material Group
ISO 513 K1 K2 K3 K4
Hardness/Rm 150-250 HB 150-350 HB 120-260 HB 250-500 HB
Vc (m/min) 100-120 80-100 50-70 40-60
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
311680 0.072 840 9550 0.065 620 6370 0.058 370 5310 0.050 270
48760 0.089 780 7170 0.080 570 4780 0.071 340 3980 0.062 250
57010 0.106 740 5730 0.095 550 3820 0.085 320 3180 0.074 240
65840 0.122 710 4780 0.110 520 3180 0.098 310 2650 0.085 230
75000 0.139 700 4090 0.125 510 2730 0.111 300 2270 0.097 220
84380 0.155 680 3580 0.140 500 2390 0.124 300 1990 0.109 220
93890 0.172 670 3180 0.155 490 2120 0.138 290 1770 0.120 210
10 3500 0.188 660 2870 0.169 490 1910 0.150 290 1590 0.132 210
11 3180 0.205 650 2610 0.185 480 1740 0.164 290 1450 0.144 210
12 2920 0.221 650 2390 0.199 480 1590 0.177 280 1330 0.155 210
13 2690 0.238 640 2200 0.214 470 1470 0.190 280 1220 0.167 200
14 2500 0.254 640 2050 0.229 470 1360 0.203 280 1140 0.178 200
15 2340 0.270 630 1910 0.243 460 1270 0.216 270 1060 0.189 200
16 2190 0.286 630 1790 0.257 460 1190 0.229 270 1000 0.200 200
Ø RUN OUT
<0.02mm
Material Group
ISO 513 N1 > 5% Si N2 N4
Hardness/Rm
Vc (m/min) 160-200 140-180 130-170
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
319110 0.086 1650 16990 0.078 1320 15920 0.078 1240
414330 0.107 1530 12740 0.096 1220 11940 0.096 1150
511460 0.127 1460 10190 0.114 1170 9550 0.114 1090
69550 0.146 1400 8490 0.132 1120 7960 0.132 1050
78190 0.167 1370 7280 0.150 1090 6820 0.150 1020
87170 0.186 1330 6370 0.167 1070 5970 0.167 1000
96370 0.206 1310 5660 0.186 1050 5310 0.186 990
10 5730 0.226 1290 5100 0.203 1040 4780 0.203 970
11 5210 0.246 1280 4630 0.221 1030 4340 0.221 960
12 4780 0.265 1270 4250 0.239 1010 3980 0.239 950
13 4410 0.286 1260 3920 0.257 1010 3670 0.257 940
14 4090 0.305 1250 3640 0.274 1000 3410 0.274 940
15 3820 0.324 1240 3400 0.292 990 3180 0.292 930
16 3580 0.343 1230 3180 0.309 980 2990 0.309 920
TYPHOON - high performance solid carbide drills
79
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
CUTTING PARAMETERS
3584HTA
Ø RUN OUT
<0.02mm
Material Group
ISO 513 S1 S2 S3 S4 S5
Hardness/Rm < 35 HRC 35-45 HRC
Vc (m/min) 25-35 15-25 35-45 25-35
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
33180 0.046 150 2120 0.032 70 4250 0.044 190 3180 0.037 120
42390 0.055 130 1590 0.039 60 3180 0.052 170 2390 0.044 110
51910 0.063 120 1270 0.044 60 2550 0.060 150 1910 0.050 100
61590 0.073 120 1060 0.051 50 2120 0.069 150 1590 0.058 90
71360 0.080 110 910 0.056 50 1820 0.076 140 1360 0.064 90
81190 0.090 110 800 0.063 50 1590 0.086 140 1190 0.072 90
91060 0.100 110 710 0.070 50 1420 0.095 130 1060 0.080 80
10 960 0.110 110 640 0.077 50 1270 0.105 130 960 0.088 80
11 870 0.120 100 580 0.084 50 1160 0.114 130 870 0.096 80
12 800 0.130 100 530 0.091 50 1060 0.124 130 800 0.104 80
13 730 0.137 100 490 0.096 50 980 0.130 130 730 0.110 80
14 680 0.145 100 450 0.102 50 910 0.138 130 680 0.116 80
15 640 0.153 100 420 0.107 40 850 0.145 120 640 0.122 80
16 600 0.160 100 400 0.112 40 800 0.152 120 600 0.128 80
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
PU-HPU
TYPHOON PU-HPU
HIGH PERFORMANCE - UNIVERSAL APPLICATION
Universal high performance drills for ISO P, M, K, N, S.
Punte universali ad alto rendimento per applicazione su
materiali ISO P, M, K, N, S.
Universelle Hochleistungsbohrer für Anwendungen auf den
Materialien ISO P, M, K, N, S.
Forets universels haute performance pour des applications
sur des matériaux ISO P, M, K, N, S.
Puntas universales de alto rendimiento para aplicación en
materiales ISO P, M, K, N, S.
Универсальные высокопроизводительные сверла для
обработки материалов по ISO P, M, K, N, S.
82
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
PU-HPU
82
TYPHOON PU-HPU HIGH PERFORMANCE - UNIVERSAL APPLICATION
- Self-centering geometry for accurate holes
- Reinforced geometry for higher feed rate
- Wide flute for smoother chip ejection
- Straight cutting edge: high chipping
resistance and short chip shape
- Thicker chisel edge: enables higher feed
rate
- 45° chamfer for wear and chipping
protection
- Selected substrate and last generation
coating for great wear resistance and long
life even at high cutting speed
- Affûtage autocentré pour des trous précis
- Géométrie renforcée pour des vitesses
d’avance élevées
- Géométrie des goujures large pour une
évacuation meilleure des copeaux
- Géométrie de l’arête rectiligne : très
robuste, elle permet de former des copeaux
courts
- Géométrie de l’arête transversale :
épaissie pour permettre des avancements
plus élevés
- Angles de l’arête biseautés à 45° pour les
protéger de l’usure et des éclats
- Substrat en carbure et revêtement
spécifique pour garantir une longue durée
à des vitesses de coupe élevées
- Affilatura autocentrante per fori precisi
- Geometria rinforzata per elevati
avanzamenti
- Geometria gole ampia per una migliore
evacuazione dei trucioli
- Geometria del tagliente rettilineo: molto
robusta che permette di formare trucioli
corti
- Geometria del tagliente trasversale:
inspessita per consentire avanzamenti più
elevati
- Spigoli del tagliente smussati a 45° per
proteggerli da usura e scheggiature
- Substrato in metallo duro e rivestimento
specifici per garantire lunga durata anche a
velocità di taglio elevate
- Afilado autocentrante para agujeros
precisos
- Geometría reforzada para elevados
avances
- Geometría de las ranuras amplia para una
mejor evacuación de las virutas
- Geometría del filo rectilíneo: muy
resistente, que permite formar virutas cortas
- Geometría del filo transversal: engrosada
para permitir avances más elevados
- Ángulos del filo redondeados a 45º para
protegerlos del desgaste y astillado
- Sustrato en metal duro y revestimiento
específicos para garantizar una larga
duración incluso a velocidades de corte
elevadas
- Selbstzentrierender Schliff für präzise
Bohrungen
- Verstärkte Geometrie für erhöhten
Vorschub
- Breite Geometrie der Nuten für eine
verbesserte Späneabführung
- Gerade Geometrie der Schneidkante:
äußerst robust, wodurch kurze Späne
erzeugt werden
- Transversale Geometrie der Schneidkante:
verstärkt für erhöhten Vorschub
- Im 45°-Winkel angefaste Schneidkanten
zum Schutz gegen Verschleiß und
Absplittern
- Trägermaterial aus Hartmetall und
spezielle Beschichtung zur Gewährleistung
einer langen Lebensdauer auch bei hohen
Schnittgeschwindigkeiten
- Самоцентрирующаяся заточка для
сверления отверстий высокой точности
- Усиленная геометрия для работы с
высокими подачами
- Широкие канавки для хорошего отвода
стружки
- Прямые режущие кромки:
формирование короткой стружки и
предотвращение ее пакетирования
- Увеличенная перемычка: позволяет
увеличить подачу
- Фаски 45° для защиты от износа и
пакетирования стружки
- Специальное покрытие последнего
поколения для повышения стойкости
и надежности при работе с высокими
скоростями резания
PU
HPU
TYPHOON - high performance solid carbide drills
83
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
PU-HPU
h stock standard f non-standard stock m stock exhaustion
D(m7) D Tol. d(h6) l l1 L EDP No. Stock EDP No. Stock
3.00 +0.012/+0.002 6 14 20 62 353PU0300 h353HPU0300 h
3.10 +0.016/+0.004 6 14 20 62 353PU0310 h353HPU0310 h
3.20 +0.016/+0.004 6 14 20 62 353PU0320 h353HPU0320 h
3.30 +0.016/+0.004 6 14 20 62 353PU0330 h353HPU0330 h
3.40 +0.016/+0.004 6 14 20 62 353PU0340 h353HPU0340 h
3.50 +0.016/+0.004 6 14 20 62 353PU0350 h353HPU0350 h
3.60 +0.016/+0.004 6 14 20 62 353PU0360 h353HPU0360 h
3.70 +0.016/+0.004 6 14 20 62 353PU0370 h353HPU0370 h
3.80 +0.016/+0.004 6 17 24 66 353PU0380 h353HPU0380 h
3.90 +0.016/+0.004 6 17 24 66 353PU0390 h353HPU0390 h
4.00 +0.016/+0.004 6 17 24 66 353PU0400 h353HPU0400 h
4.10 +0.016/+0.004 6 17 24 66 353PU0410 h353HPU0410 h
4.20 +0.016/+0.004 6 17 24 66 353PU0420 h353HPU0420 h
4.30 +0.016/+0.004 6 17 24 66 353PU0430 h353HPU0430 h
4.40 +0.016/+0.004 6 17 24 66 353PU0440 h353HPU0440 h
4.50 +0.016/+0.004 6 17 24 66 353PU0450 h353HPU0450 h
4.60 +0.016/+0.004 6 17 24 66 353PU0460 h353HPU0460 h
4.70 +0.016/+0.004 6 17 24 66 353PU0470 h353HPU0470 h
4.80 +0.016/+0.004 6 20 28 66 353PU0480 h353HPU0480 h
4.90 +0.016/+0.004 6 20 28 66 353PU0490 h353HPU0490 h
5.00 +0.016/+0.004 6 20 28 66 353PU0500 h353HPU0500 h
5.10 +0.016/+0.004 6 20 28 66 353PU0510 h353HPU0510 h
5.20 +0.016/+0.004 6 20 28 66 353PU0520 h353HPU0520 h
5.30 +0.016/+0.004 6 20 28 66 353PU0530 h353HPU0530 h
5.40 +0.016/+0.004 6 20 28 66 353PU0540 h353HPU0540 h
5.50 +0.016/+0.004 6 20 28 66 353PU0550 h353HPU0550 h
5.60 +0.016/+0.004 6 20 28 66 353PU0560 h353HPU0560 h
5.70 +0.016/+0.004 6 20 28 66 353PU0570 h353HPU0570 h
5.80 +0.016/+0.004 6 20 28 66 353PU0580 h353HPU0580 h
5.90 +0.016/+0.004 6 20 28 66 353PU0590 h353HPU0590 h
6.00 +0.016/+0.004 6 20 28 66 353PU0600 h353HPU0600 h
6.10 +0.021/+0.006 8 24 34 79 353PU0610 h353HPU0610 h
6.20 +0.021/+0.006 8 24 34 79 353PU0620 h353HPU0620 h
6.30 +0.021/+0.006 8 24 34 79 353PU0630 h353HPU0630 h
6.40 +0.021/+0.006 8 24 34 79 353PU0640 h353HPU0640 h
6.50 +0.021/+0.006 8 24 34 79 353PU0650 h353HPU0650 h
6.60 +0.021/+0.006 8 24 34 79 353PU0660 h353HPU0660 h
6.70 +0.021/+0.006 8 24 34 79 353PU0670 h353HPU0670 h
6.80 +0.021/+0.006 8 24 34 79 353PU0680 h353HPU0680 h
353PU-353HPU
universal application, high productivity,
PU and HPU (through coolant)
3XD DIN
6537K
140°+C45°
353PU 353HPU
353PU
353HPU
PMKNSH
+++,+
+ 1st choice , suitable
353PU 353HPU
353PU
353HPU
C45°
C45°
TYPHOON - high performance solid carbide drills
84
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
PU-HPU
D(m7) D Tol. d(h6) l l1 L EDP No. Stock EDP No. Stock
6.90 +0.021/+0.006 8 24 34 79 353PU0690 h353HPU0690 h
7.00 +0.021/+0.006 8 24 34 79 353PU0700 h353HPU0700 h
7.10 +0.021/+0.006 8 29 41 79 353PU0710 h353HPU0710 h
7.20 +0.021/+0.006 8 29 41 79 353PU0720 h353HPU0720 h
7.30 +0.021/+0.006 8 29 41 79 353PU0730 h353HPU0730 h
7.40 +0.021/+0.006 8 29 41 79 353PU0740 h353HPU0740 h
7.50 +0.021/+0.006 8 29 41 79 353PU0750 h353HPU0750 h
7.60 +0.021/+0.006 8 29 41 79 353PU0760 h353HPU0760 h
7.70 +0.021/+0.006 8 29 41 79 353PU0770 h353HPU0770 h
7.80 +0.021/+0.006 8 29 41 79 353PU0780 h353HPU0780 h
7.90 +0.021/+0.006 8 29 41 79 353PU0790 h353HPU0790 h
8.00 +0.021/+0.006 8 29 41 79 353PU0800 h353HPU0800 h
8.10 +0.021/+0.006 10 35 47 89 353PU0810 h353HPU0810 h
8.20 +0.021/+0.006 10 35 47 89 353PU0820 h353HPU0820 h
8.30 +0.021/+0.006 10 35 47 89 353PU0830 h353HPU0830 h
8.40 +0.021/+0.006 10 35 47 89 353PU0840 h353HPU0840 h
8.50 +0.021/+0.006 10 35 47 89 353PU0850 h353HPU0850 h
8.60 +0.021/+0.006 10 35 47 89 353PU0860 h353HPU0860 h
8.70 +0.021/+0.006 10 35 47 89 353PU0870 h353HPU0870 h
8.80 +0.021/+0.006 10 35 47 89 353PU0880 h353HPU0880 h
8.90 +0.021/+0.006 10 35 47 89 353PU0890 h353HPU0890 h
9.00 +0.021/+0.006 10 35 47 89 353PU0900 h353HPU0900 h
9.10 +0.021/+0.006 10 35 47 89 353PU0910 h353HPU0910 h
9.20 +0.021/+0.006 10 35 47 89 353PU0920 h353HPU0920 h
9.30 +0.021/+0.006 10 35 47 89 353PU0930 h353HPU0930 h
9.40 +0.021/+0.006 10 35 47 89 353PU0940 h353HPU0940 h
9.50 +0.021/+0.006 10 35 47 89 353PU0950 h353HPU0950 h
9.60 +0.021/+0.006 10 35 47 89 353PU0960 h353HPU0960 h
9.70 +0.021/+0.006 10 35 47 89 353PU0970 h353HPU0970 h
9.80 +0.021/+0.006 10 35 47 89 353PU0980 h353HPU0980 h
9.90 +0.021/+0.006 10 35 47 89 353PU0990 h353HPU0990 h
10.00 +0.021/+0.006 10 35 47 89 353PU1000 h353HPU1000 h
10.10 +0.025/+0.007 12 40 55 102 353PU1010 h353HPU1010 h
10.20 +0.025/+0.007 12 40 55 102 353PU1020 h353HPU1020 h
10.30 +0.025/+0.007 12 40 55 102 353PU1030 h353HPU1030 h
10.40 +0.025/+0.007 12 40 55 102 353PU1040 h353HPU1040 h
10.50 +0.025/+0.007 12 40 55 102 353PU1050 h353HPU1050 h
10.60 +0.025/+0.007 12 40 55 102 353PU1060 h353HPU1060 h
10.70 +0.025/+0.007 12 40 55 102 353PU1070 h353HPU1070 h
h stock standard f non-standard stock m stock exhaustion
353PU-353HPU
universal application, high productivity,
PU and HPU (through coolant)
3XD DIN
6537K
140°+C45°
353PU 353HPU
353PU
353HPU
PMKNSH
+++,+
+ 1st choice , suitable
353PU 353HPU
353PU
353HPU
C45°
C45°
TYPHOON - high performance solid carbide drills
85
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
PU-HPU
D(m7) D Tol. d(h6) l l1 L EDP No. Stock EDP No. Stock
10.80 +0.025/+0.007 12 40 55 102 353PU1080 h353HPU1080 h
10.90 +0.025/+0.007 12 40 55 102 353PU1090 h353HPU1090 h
11.00 +0.025/+0.007 12 40 55 102 353PU1100 h353HPU1100 h
11.10 +0.025/+0.007 12 40 55 102 353PU1110 h353HPU1110 h
11.20 +0.025/+0.007 12 40 55 102 353PU1120 h353HPU1120 h
11.30 +0.025/+0.007 12 40 55 102 353PU1130 h353HPU1130 h
11.40 +0.025/+0.007 12 40 55 102 353PU1140 h353HPU1140 h
11.50 +0.025/+0.007 12 40 55 102 353PU1150 h353HPU1150 h
11.60 +0.025/+0.007 12 40 55 102 353PU1160 h353HPU1160 h
11.70 +0.025/+0.007 12 40 55 102 353PU1170 h353HPU1170 h
11.80 +0.025/+0.007 12 40 55 102 353PU1180 h353HPU1180 h
11.90 +0.025/+0.007 12 40 55 102 353PU1190 h353HPU1190 h
12.00 +0.025/+0.007 12 40 55 102 353PU1200 h353HPU1200 h
12.10 +0.025/+0.007 14 43 60 107 353PU1210 h353HPU1210 h
12.20 +0.025/+0.007 14 43 60 107 353PU1220 h353HPU1220 h
12.30 +0.025/+0.007 14 43 60 107 353PU1230 h353HPU1230 h
12.40 +0.025/+0.007 14 43 60 107 353PU1240 h353HPU1240 h
12.50 +0.025/+0.007 14 43 60 107 353PU1250 h353HPU1250 h
12.60 +0.025/+0.007 14 43 60 107 353PU1260 h353HPU1260 h
12.70 +0.025/+0.007 14 43 60 107 353PU1270 h353HPU1270 h
12.80 +0.025/+0.007 14 43 60 107 353PU1280 h353HPU1280 h
12.90 +0.025/+0.007 14 43 60 107 353PU1290 h353HPU1290 h
13.00 +0.025/+0.007 14 43 60 107 353PU1300 h353HPU1300 h
13.10 +0.025/+0.007 14 43 60 107 353PU1310 h353HPU1310 h
13.20 +0.025/+0.007 14 43 60 107 353PU1320 h353HPU1320 h
13.30 +0.025/+0.007 14 43 60 107 353PU1330 h353HPU1330 h
13.40 +0.025/+0.007 14 43 60 107 353PU1340 h353HPU1340 h
13.50 +0.025/+0.007 14 43 60 107 353PU1350 h353HPU1350 h
13.60 +0.025/+0.007 14 43 60 107 353PU1360 h353HPU1360 h
13.70 +0.025/+0.007 14 43 60 107 353PU1370 h353HPU1370 h
13.80 +0.025/+0.007 14 43 60 107 353PU1380 h353HPU1380 h
13.90 +0.025/+0.007 14 43 60 107 353PU1390 h353HPU1390 h
14.00 +0.025/+0.007 14 43 60 107 353PU1400 h353HPU1400 h
14.10 +0.025/+0.007 16 45 65 115 353PU1410 h353HPU1410 h
14.20 +0.025/+0.007 16 45 65 115 353PU1420 h353HPU1420 h
14.30 +0.025/+0.007 16 45 65 115 353PU1430 h353HPU1430 h
14.50 +0.025/+0.007 16 45 65 115 353PU1450 h353HPU1450 h
14.60 +0.025/+0.007 16 45 65 115 353PU1460 h353HPU1460 h
14.70 +0.025/+0.007 16 45 65 115 353PU1470 h
h stock standard f non-standard stock m stock exhaustion
353PU-353HPU
universal application, high productivity,
PU and HPU (through coolant)
3XD DIN
6537K
140°+C45°
353PU 353HPU
353PU
353HPU
PMKNSH
+++,+
+ 1st choice , suitable
353PU 353HPU
353PU
353HPU
C45°
C45°
TYPHOON - high performance solid carbide drills
86
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
PU-HPU
D(m7) D Tol. d(h6) l l1 L EDP No. Stock EDP No. Stock
14.80 +0.025/+0.007 16 45 65 115 353PU1480 h353HPU1480 h
15.00 +0.025/+0.007 16 65 65 115 353PU1500 h353HPU1500 h
15.10 +0.025/+0.007 16 65 65 115 353PU1510 h353HPU1510 h
15.20 +0.025/+0.007 16 65 65 115 353PU1520 h353HPU1520 h
15.30 +0.025/+0.007 16 65 65 115 353PU1530 h353HPU1530 h
15.50 +0.025/+0.007 16 65 65 115 353PU1550 h353HPU1550 h
15.60 +0.025/+0.007 16 65 65 115 353PU1560 h353HPU1560 h
15.70 +0.025/+0.007 16 65 65 115 353PU1570 h353HPU1570 h
15.80 +0.025/+0.007 16 65 65 115 353PU1580 h353HPU1580 h
16.00 +0.025/+0.007 16 65 65 115 353PU1600 h353HPU1600 h
16.10 +0.025/+0.007 18 73 73 123 353HPU1610 h
16.20 +0.025/+0.007 18 73 73 123 353HPU1620 h
16.30 +0.025/+0.007 18 73 73 123 353HPU1630 h
16.50 +0.025/+0.007 18 73 73 123 353PU1650 h353HPU1650 h
16.70 +0.025/+0.007 18 73 73 123 353HPU1670 h
16.80 +0.025/+0.007 18 73 73 123 353HPU1680 h
17.00 +0.025/+0.007 18 73 73 123 353PU1700 h353HPU1700 h
17.10 +0.025/+0.007 18 73 73 123 353HPU1710 h
17.20 +0.025/+0.007 18 73 73 123 353HPU1720 h
17.50 +0.025/+0.007 18 73 73 123 353PU1750 h353HPU1750 h
17.60 +0.025/+0.007 18 73 73 123 353HPU1760 h
17.70 +0.025/+0.007 18 73 73 123 353HPU1770 h
17.80 +0.025/+0.007 18 73 73 123 353HPU1780 h
18.00 +0.025/+0.007 18 73 73 123 353PU1800 h353HPU1800 h
18.10 +0.029/+0.008 20 79 79 131 353HPU1810 h
18.20 +0.029/+0.008 20 79 79 131 353HPU1820 h
18.30 +0.029/+0.008 20 79 79 131 353HPU1830 h
18.50 +0.029/+0.008 20 79 79 131 353PU1850 h353HPU1850 h
18.60 +0.029/+0.008 20 79 79 131 353HPU1860 h
18.70 +0.029/+0.008 20 79 79 131 353HPU1870 h
18.80 +0.029/+0.008 20 79 79 131 353HPU1880 h
19.00 +0.029/+0.008 20 79 79 131 353PU1900 h353HPU1900 h
19.20 +0.029/+0.008 20 79 79 131 353HPU1920 h
19.30 +0.029/+0.008 20 79 79 131 353HPU1930 h
19.50 +0.029/+0.008 20 79 79 131 353PU1950 h353HPU1950 h
19.60 +0.029/+0.008 20 79 79 131 353HPU1960 h
19.80 +0.029/+0.008 20 79 79 131 353HPU1980 h
20.00 +0.029/+0.008 20 79 79 131 353PU2000 h353HPU2000 h
h stock standard f non-standard stock m stock exhaustion
353PU-353HPU
universal application, high productivity,
PU and HPU (through coolant)
3XD DIN
6537K
140°+C45°
353PU 353HPU
353PU
353HPU
PMKNSH
+++,+
+ 1st choice , suitable
353PU 353HPU
353PU
353HPU
C45°
C45°
TYPHOON - high performance solid carbide drills
87
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
PU-HPU
CUTTING PARAMETERS
353PU
Ø RUN OUT
<0.02mm
Material Group
ISO 513 P1 P2 P3 P4 P5 P6
Hardness/Rm 500-700 N/mm² 600-1000 N/mm² 900-1200 N/mm² 1200-1400 N/mm²
Vc (m/min) 110-130 90-110 60-80 40-60
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
312740 0.110 1400 10620 0.094 990 7430 0.083 610 5310 0.066 350
49550 0.120 1150 7960 0.102 810 5570 0.090 500 3980 0.072 290
57640 0.130 990 6370 0.111 700 4460 0.098 430 3180 0.078 250
66370 0.145 920 5310 0.123 650 3720 0.109 400 2650 0.087 230
75460 0.160 870 4550 0.136 620 3180 0.120 380 2270 0.096 220
84780 0.175 840 3980 0.149 590 2790 0.131 370 1990 0.105 210
94250 0.190 810 3540 0.162 570 2480 0.143 350 1770 0.114 200
10 3820 0.205 780 3180 0.174 550 2230 0.154 340 1590 0.123 200
11 3470 0.220 760 2900 0.187 540 2030 0.165 330 1450 0.132 190
12 3180 0.240 760 2650 0.204 540 1860 0.180 330 1330 0.144 190
13 2940 0.260 760 2450 0.221 540 1710 0.195 330 1220 0.156 190
14 2730 0.285 780 2270 0.242 550 1590 0.214 340 1140 0.171 190
15 2550 0.310 790 2120 0.264 560 1490 0.233 350 1060 0.186 200
16 2390 0.335 800 1990 0.285 570 1390 0.251 350 1000 0.201 200
17 2250 0.360 810 1870 0.306 570 1310 0.270 350 940 0.216 200
18 2120 0.385 820 1770 0.327 580 1240 0.289 360 880 0.231 200
19 2010 0.410 820 1680 0.349 590 1170 0.308 360 840 0.246 210
20 1910 0.435 830 1590 0.370 590 1110 0.326 360 800 0.261 210
353HPU
Ø RUN OUT
<0.02mm
Material Group
ISO 513 P1 P2 P3 P4 P5 P6
Hardness/Rm 500-700 N/mm² 600-1000 N/mm² 900-1200 N/mm² 1200-1400 N/mm²
Vc (m/min) 140-160 120-150 90-110 60-80
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
315920 0.127 2010 13800 0.114 1570 10620 0.101 1070 7430 0.089 660
411940 0.150 1790 10350 0.135 1390 7960 0.120 950 5570 0.105 580
59550 0.173 1650 8280 0.155 1290 6370 0.138 880 4460 0.121 540
67960 0.196 1560 6900 0.176 1210 5310 0.156 830 3720 0.137 510
76820 0.219 1490 5910 0.197 1160 4550 0.175 800 3180 0.153 490
85970 0.242 1440 5180 0.217 1130 3980 0.193 770 2790 0.169 470
95310 0.265 1400 4600 0.238 1100 3540 0.212 750 2480 0.185 460
10 4780 0.288 1370 4140 0.259 1070 3180 0.230 730 2230 0.201 450
11 4340 0.299 1300 3760 0.269 1010 2900 0.239 690 2030 0.209 420
12 3980 0.322 1280 3450 0.290 1000 2650 0.258 680 1860 0.225 420
13 3670 0.345 1270 3180 0.311 990 2450 0.276 680 1710 0.242 410
14 3410 0.368 1250 2960 0.331 980 2270 0.294 670 1590 0.258 410
15 3180 0.391 1240 2760 0.352 970 2120 0.313 660 1490 0.274 410
16 2990 0.414 1240 2590 0.373 970 1990 0.331 660 1390 0.290 400
17 2810 0.426 1200 2440 0.383 930 1870 0.340 640 1310 0.298 390
18 2650 0.437 1160 2300 0.393 900 1770 0.350 620 1240 0.306 380
19 2510 0.449 1130 2180 0.404 880 1680 0.359 600 1170 0.314 370
20 2390 0.460 1100 2070 0.414 860 1590 0.368 590 1110 0.322 360
TYPHOON - high performance solid carbide drills
88
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
PU-HPU
CUTTING PARAMETERS
353PU
Ø RUN OUT
<0.02mm
Material Group
ISO 513 M1 M2 M3 M4 M5
Hardness/Rm < 750 N/mm² 550-850 N/mm² 650-950 N/mm² 850-1200 N/mm²
Vc (m/min) 45-55 35-45 25-35 20-30
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
35310 0.077 410 4250 0.065 280 3180 0.058 180 2650 0.046 120
43980 0.084 330 3180 0.071 230 2390 0.063 150 1990 0.050 100
53180 0.091 290 2550 0.077 200 1910 0.068 130 1590 0.055 90
62650 0.102 270 2120 0.086 180 1590 0.076 120 1330 0.061 80
72270 0.112 250 1820 0.095 170 1360 0.084 110 1140 0.067 80
81990 0.123 240 1590 0.104 170 1190 0.092 110 1000 0.074 70
91770 0.133 240 1420 0.113 160 1060 0.100 110 880 0.080 70
10 1590 0.144 230 1270 0.122 150 960 0.108 100 800 0.086 70
11 1450 0.154 220 1160 0.131 150 870 0.116 100 720 0.092 70
12 1330 0.168 220 1060 0.143 150 800 0.126 100 660 0.101 70
13 1220 0.182 220 980 0.155 150 730 0.137 100 610 0.109 70
14 1140 0.200 230 910 0.170 150 680 0.150 100 570 0.120 70
15 1060 0.217 230 850 0.184 160 640 0.163 100 530 0.130 70
16 1000 0.235 230 800 0.199 160 600 0.176 110 500 0.141 70
17 940 0.252 240 750 0.214 160 560 0.189 110 470 0.151 70
18 880 0.270 240 710 0.229 160 530 0.202 110 440 0.162 70
19 840 0.287 240 670 0.244 160 500 0.215 110 420 0.172 70
20 800 0.305 240 640 0.259 170 480 0.228 110 400 0.183 70
353HPU
Ø RUN OUT
<0.02mm
Material Group
ISO 513 M1 M2 M3 M4 M5
Hardness/Rm < 750 N/mm² 550-850 N/mm² 650-950 N/mm² 850-1200 N/mm²
Vc (m/min) 60-80 50-70 35-45 20-40
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
37430 0.082 610 6370 0.066 420 4250 0.058 240 3180 0.049 160
45570 0.097 540 4780 0.078 370 3180 0.068 220 2390 0.058 140
54460 0.112 500 3820 0.090 340 2550 0.078 200 1910 0.067 130
63720 0.127 470 3180 0.102 320 2120 0.089 190 1590 0.076 120
73180 0.142 450 2730 0.114 310 1820 0.099 180 1360 0.085 120
82790 0.157 440 2390 0.126 300 1590 0.110 170 1190 0.094 110
92480 0.172 430 2120 0.138 290 1420 0.120 170 1060 0.103 110
10 2230 0.187 420 1910 0.150 290 1270 0.131 170 960 0.112 110
11 2030 0.194 390 1740 0.155 270 1160 0.136 160 870 0.117 100
12 1860 0.209 390 1590 0.167 270 1060 0.147 160 800 0.126 100
13 1710 0.224 380 1470 0.179 260 980 0.157 150 730 0.135 100
14 1590 0.239 380 1360 0.191 260 910 0.167 150 680 0.144 100
15 1490 0.254 380 1270 0.203 260 850 0.178 150 640 0.152 100
16 1390 0.269 370 1190 0.215 260 800 0.188 150 600 0.161 100
17 1310 0.277 360 1120 0.221 250 750 0.194 150 560 0.166 90
18 1240 0.284 350 1060 0.227 240 710 0.199 140 530 0.170 90
19 1170 0.292 340 1010 0.233 240 670 0.204 140 500 0.175 90
20 1110 0.299 330 960 0.239 230 640 0.209 130 480 0.179 90
TYPHOON - high performance solid carbide drills
89
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
PU-HPU
CUTTING PARAMETERS
353PU
Ø RUN OUT
<0.02mm
Material Group
ISO 513 K1 K2 K3 K4
Hardness/Rm 150-250 HB 150-350 HB 120-260 HB 250-500 HB
Vc (m/min) 110-130 90-110 60-80 40-60
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
312740 0.110 1400 10620 0.094 990 7430 0.083 610 5310 0.066 350
49550 0.120 1150 7960 0.102 810 5570 0.090 500 3980 0.072 290
57640 0.130 990 6370 0.111 700 4460 0.098 430 3180 0.078 250
66370 0.145 920 5310 0.123 650 3720 0.109 400 2650 0.087 230
75460 0.160 870 4550 0.136 620 3180 0.120 380 2270 0.096 220
84780 0.175 840 3980 0.149 590 2790 0.131 370 1990 0.105 210
94250 0.190 810 3540 0.162 570 2480 0.143 350 1770 0.114 200
10 3820 0.205 780 3180 0.174 550 2230 0.154 340 1590 0.123 200
11 3470 0.220 760 2900 0.187 540 2030 0.165 330 1450 0.132 190
12 3180 0.240 760 2650 0.204 540 1860 0.180 330 1330 0.144 190
13 2940 0.260 760 2450 0.221 540 1710 0.195 330 1220 0.156 190
14 2730 0.285 780 2270 0.242 550 1590 0.214 340 1140 0.171 190
15 2550 0.310 790 2120 0.264 560 1490 0.233 350 1060 0.186 200
16 2390 0.335 800 1990 0.285 570 1390 0.251 350 1000 0.201 200
17 2250 0.360 810 1870 0.306 570 1310 0.270 350 940 0.216 200
18 2120 0.385 820 1770 0.327 580 1240 0.289 360 880 0.231 200
19 2010 0.410 820 1680 0.349 590 1170 0.308 360 840 0.246 210
20 1910 0.435 830 1590 0.370 590 1110 0.326 360 800 0.261 210
353HPU
Ø RUN OUT
<0.02mm
Material Group
ISO 513 K1 K2 K3 K4
Hardness/Rm 150-250 HB 150-350 HB 120-260 HB 250-500 HB
Vc (m/min) 120-140 100-120 80-100 60-80
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
313800 0.127 1750 11680 0.114 1330 9550 0.101 970 7430 0.089 660
410350 0.150 1550 8760 0.135 1180 7170 0.120 860 5570 0.105 580
58280 0.173 1430 7010 0.155 1090 5730 0.138 790 4460 0.121 540
66900 0.196 1350 5840 0.176 1030 4780 0.156 750 3720 0.137 510
75910 0.219 1290 5000 0.197 980 4090 0.175 710 3180 0.153 490
85180 0.242 1250 4380 0.217 950 3580 0.193 690 2790 0.169 470
94600 0.265 1220 3890 0.238 930 3180 0.212 670 2480 0.185 460
10 4140 0.288 1190 3500 0.259 910 2870 0.230 660 2230 0.201 450
11 3760 0.299 1120 3180 0.269 860 2610 0.239 620 2030 0.209 420
12 3450 0.322 1110 2920 0.290 850 2390 0.258 620 1860 0.225 420
13 3180 0.345 1100 2690 0.311 840 2200 0.276 610 1710 0.242 410
14 2960 0.368 1090 2500 0.331 830 2050 0.294 600 1590 0.258 410
15 2760 0.391 1080 2340 0.352 820 1910 0.313 600 1490 0.274 410
16 2590 0.414 1070 2190 0.373 820 1790 0.331 590 1390 0.290 400
17 2440 0.426 1040 2060 0.383 790 1690 0.340 580 1310 0.298 390
18 2300 0.437 1010 1950 0.393 770 1590 0.350 560 1240 0.306 380
19 2180 0.449 980 1840 0.404 740 1510 0.359 540 1170 0.314 370
20 2070 0.460 950 1750 0.414 720 1430 0.368 530 1110 0.322 360
TYPHOON - high performance solid carbide drills
90
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
PU-HPU
CUTTING PARAMETERS
353PU
Ø RUN OUT
<0.02mm
Material Group
ISO 513 N1 > 5%Si N2 N3 N4
Hardness/Rm
Vc (m/min) 220-260 200-240 160-200
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
325480 0.132 3360 23350 0.119 2770 19110 0.106 2020
419110 0.144 2750 17520 0.130 2270 14330 0.115 1650
515290 0.156 2390 14010 0.140 1970 11460 0.125 1430
612740 0.174 2220 11680 0.157 1830 9550 0.139 1330
710920 0.192 2100 10010 0.173 1730 8190 0.154 1260
89550 0.210 2010 8760 0.189 1660 7170 0.168 1200
98490 0.228 1940 7780 0.205 1600 6370 0.182 1160
10 7640 0.246 1880 7010 0.221 1550 5730 0.197 1130
11 6950 0.264 1830 6370 0.238 1510 5210 0.211 1100
12 6370 0.288 1830 5840 0.259 1510 4780 0.230 1100
13 5880 0.312 1830 5390 0.281 1510 4410 0.250 1100
14 5460 0.342 1870 5000 0.308 1540 4090 0.274 1120
15 5100 0.372 1900 4670 0.335 1560 3820 0.298 1140
16 4780 0.402 1920 4380 0.362 1580 3580 0.322 1150
17 4500 0.432 1940 4120 0.389 1600 3370 0.346 1160
18 4250 0.462 1960 3890 0.416 1620 3180 0.370 1180
19 4020 0.492 1980 3690 0.443 1630 3020 0.394 1190
20 3820 0.522 1990 3500 0.470 1640 2870 0.418 1200
353HPU
Ø RUN OUT
<0.02mm
Material Group
ISO 513 N1 > 5%Si N2 N3 N4
Hardness/Rm
Vc (m/min) 240-280 220-260 180-220
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
327600 0.152 4190 25480 0.139 3550 21230 0.111 2360
420700 0.179 3710 19110 0.164 3140 15920 0.132 2090
516560 0.207 3430 15290 0.190 2900 12740 0.152 1930
613800 0.235 3240 12740 0.215 2740 10620 0.172 1830
711830 0.262 3100 10920 0.240 2620 9100 0.192 1750
810350 0.290 3000 9550 0.266 2540 7960 0.213 1690
99200 0.317 2920 8490 0.291 2470 7080 0.233 1650
10 8280 0.345 2860 7640 0.316 2420 6370 0.253 1610
11 7530 0.359 2700 6950 0.329 2290 5790 0.263 1520
12 6900 0.386 2670 6370 0.354 2260 5310 0.283 1500
13 6370 0.414 2640 5880 0.380 2230 4900 0.304 1490
14 5910 0.442 2610 5460 0.405 2210 4550 0.324 1470
15 5520 0.469 2590 5100 0.430 2190 4250 0.344 1460
16 5180 0.497 2570 4780 0.455 2180 3980 0.364 1450
17 4870 0.511 2490 4500 0.468 2110 3750 0.374 1400
18 4600 0.524 2410 4250 0.481 2040 3540 0.385 1360
19 4360 0.538 2350 4020 0.493 1980 3350 0.395 1320
20 4140 0.552 2290 3820 0.506 1930 3180 0.405 1290
TYPHOON - high performance solid carbide drills
91
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
PU-HPU
CUTTING PARAMETERS
353PU
Ø RUN OUT
<0.02mm
Material Group
ISO 513 S1 S2 S3 S4 S5
Hardness/Rm < 35 HRC 35-45 HRC
Vc (m/min) 30-40 20-30 35-45 25-35
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
33720 0.050 180 2650 0.035 90 4250 0.047 200 3180 0.040 130
42790 0.054 150 1990 0.038 80 3180 0.051 160 2390 0.043 100
52230 0.059 130 1590 0.041 70 2550 0.056 140 1910 0.047 90
61860 0.065 120 1330 0.046 60 2120 0.062 130 1590 0.052 80
71590 0.072 110 1140 0.050 60 1820 0.068 120 1360 0.058 80
81390 0.079 110 1000 0.055 60 1590 0.075 120 1190 0.063 70
91240 0.086 110 880 0.060 50 1420 0.081 120 1060 0.068 70
10 1110 0.092 100 800 0.065 50 1270 0.088 110 960 0.074 70
11 1010 0.099 100 720 0.069 50 1160 0.094 110 870 0.079 70
12 930 0.108 100 660 0.076 50 1060 0.103 110 800 0.086 70
13 860 0.117 100 610 0.082 50 980 0.111 110 730 0.094 70
14 800 0.128 100 570 0.090 50 910 0.122 110 680 0.103 70
15 740 0.140 100 530 0.098 50 850 0.133 110 640 0.112 70
16 700 0.151 110 500 0.106 50 800 0.143 110 600 0.121 70
17 660 0.162 110 470 0.113 50 750 0.154 120 560 0.130 70
18 620 0.173 110 440 0.121 50 710 0.165 120 530 0.139 70
19 590 0.185 110 420 0.129 50 670 0.175 120 500 0.148 70
20 560 0.196 110 400 0.137 50 640 0.186 120 480 0.157 80
353HPU
Ø RUN OUT
<0.02mm
Material Group
ISO 513 S1 S2 S3 S4 S5
Hardness/Rm < 35 HRC 35-45 HRC
Vc (m/min) 40-60 25-45 50-70 40-60
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
35310 0.057 300 3720 0.040 150 6370 0.054 340 5310 0.046 240
43980 0.067 270 2790 0.047 130 4780 0.064 310 3980 0.054 210
53180 0.078 250 2230 0.054 120 3820 0.074 280 3180 0.062 200
62650 0.088 230 1860 0.062 110 3180 0.084 270 2650 0.070 190
72270 0.098 220 1590 0.069 110 2730 0.093 260 2270 0.079 180
81990 0.109 220 1390 0.076 110 2390 0.103 250 1990 0.087 170
91770 0.119 210 1240 0.083 100 2120 0.113 240 1770 0.095 170
10 1590 0.129 210 1110 0.091 100 1910 0.123 230 1590 0.104 160
11 1450 0.135 200 1010 0.094 100 1740 0.128 220 1450 0.108 160
12 1330 0.145 190 930 0.101 90 1590 0.138 220 1330 0.116 150
13 1220 0.155 190 860 0.109 90 1470 0.147 220 1220 0.124 150
14 1140 0.166 190 800 0.116 90 1360 0.157 210 1140 0.132 150
15 1060 0.176 190 740 0.123 90 1270 0.167 210 1060 0.141 150
16 1000 0.186 190 700 0.130 90 1190 0.177 210 1000 0.149 150
17 940 0.191 180 660 0.134 90 1120 0.182 200 940 0.153 140
18 880 0.197 170 620 0.138 90 1060 0.187 200 880 0.157 140
19 840 0.202 170 590 0.141 80 1010 0.192 190 840 0.161 140
20 800 0.207 170 560 0.145 80 960 0.197 190 800 0.166 130
TYPHOON - high performance solid carbide drills
92
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
PU-HPU
h stock standard f non-standard stock m stock exhaustion
D(m7) D Tol. d(h6) l l1 L EDP No. Stock EDP No. Stock
3.00 +0.012/+0.002 6 23 28 66 355PU0300 h355HPU0300 h
3.10 +0.016/+0.004 6 23 28 66 355PU0310 h355HPU0310 h
3.20 +0.016/+0.004 6 23 28 66 355PU0320 h355HPU0320 h
3.25 +0.016/+0.004 6 23 28 66 355HPU0325 h
3.30 +0.016/+0.004 6 23 28 66 355PU0330 h355HPU0330 h
3.40 +0.016/+0.004 6 23 28 66 355PU0340 h355HPU0340 h
3.50 +0.016/+0.004 6 23 28 66 355PU0350 h355HPU0350 h
3.60 +0.016/+0.004 6 23 28 66 355PU0360 h355HPU0360 h
3.70 +0.016/+0.004 6 23 28 66 355PU0370 h355HPU0370 h
3.80 +0.016/+0.004 6 29 36 74 355PU0380 h355HPU0380 h
3.90 +0.016/+0.004 6 29 36 74 355PU0390 h355HPU0390 h
4.00 +0.016/+0.004 6 29 36 74 355PU0400 h355HPU0400 h
4.10 +0.016/+0.004 6 29 36 74 355PU0410 h355HPU0410 h
4.20 +0.016/+0.004 6 29 36 74 355PU0420 h355HPU0420 h
4.30 +0.016/+0.004 6 29 36 74 355PU0430 h355HPU0430 h
4.40 +0.016/+0.004 6 29 36 74 355PU0440 h355HPU0440 h
4.50 +0.016/+0.004 6 29 36 74 355PU0450 h355HPU0450 h
4.60 +0.016/+0.004 6 29 36 74 355PU0460 h355HPU0460 h
4.65 +0.016/+0.004 6 29 36 74 355HPU0465 h
4.70 +0.016/+0.004 6 29 36 74 355PU0470 h355HPU0470 h
4.80 +0.016/+0.004 6 35 44 82 355PU0480 h355HPU0480 h
4.90 +0.016/+0.004 6 35 44 82 355PU0490 h355HPU0490 h
5.00 +0.016/+0.004 6 35 44 82 355PU0500 h355HPU0500 h
5.10 +0.016/+0.004 6 35 44 82 355PU0510 h355HPU0510 h
5.20 +0.016/+0.004 6 35 44 82 355PU0520 h355HPU0520 h
5.30 +0.016/+0.004 6 35 44 82 355PU0530 h355HPU0530 h
5.40 +0.016/+0.004 6 35 44 82 355PU0540 h355HPU0540 h
5.50 +0.016/+0.004 6 35 44 82 355PU0550 h355HPU0550 h
5.55 +0.016/+0.004 6 35 44 82 355HPU0555 h
5.60 +0.016/+0.004 6 35 44 82 355PU0560 h355HPU0560 h
5.70 +0.016/+0.004 6 35 44 82 355PU0570 h355HPU0570 h
5.80 +0.016/+0.004 6 35 44 82 355PU0580 h355HPU0580 h
5.90 +0.016/+0.004 6 35 44 82 355PU0590 h355HPU0590 h
6.00 +0.016/+0.004 6 35 44 82 355PU0600 h355HPU0600 h
6.10 +0.021/+0.006 8 43 53 91 355PU0610 h355HPU0610 h
6.20 +0.021/+0.006 8 43 53 91 355PU0620 h355HPU0620 h
6.30 +0.021/+0.006 8 43 53 91 355PU0630 h355HPU0630 h
6.40 +0.021/+0.006 8 43 53 91 355PU0640 h355HPU0640 h
6.50 +0.021/+0.006 8 43 53 91 355PU0650 h355HPU0650 h
355PU-355HPU
universal application, high productivity,
PU and HPU (throughcoolant)
5XD DIN
6537L
140°+C45°
355PU 355HPU
355PU
355HPU
PMKNSH
+++,+
+ 1st choice , suitable
355PU 355HPU
C45°
C45°
355PU
355HPU
TYPHOON - high performance solid carbide drills
93
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
PU-HPU
355PU-355HPU
universal application, high productivity,
PU and HPU (throughcoolant)
5XD DIN
6537L
140°+C45°
355PU 355HPU
355PU
355HPU
PMKNSH
+++,+
+ 1st choice , suitable
355PU 355HPU
C45°
C45°
355PU
355HPU
D(m7) D Tol. d(h6) l l1 L EDP No. Stock EDP No. Stock
6.60 +0.021/+0.006 8 43 53 91 355PU0660 h355HPU0660 h
6.70 +0.021/+0.006 8 43 53 91 355PU0670 h355HPU0670 h
6.80 +0.021/+0.006 8 43 53 91 355PU0680 h355HPU0680 h
6.90 +0.021/+0.006 8 43 53 91 355PU0690 h355HPU0690 h
7.00 +0.021/+0.006 8 43 53 91 355PU0700 h355HPU0700 h
7.10 +0.021/+0.006 8 43 53 91 355PU0710 h355HPU0710 h
7.20 +0.021/+0.006 8 43 53 91 355PU0720 h355HPU0720 h
7.30 +0.021/+0.006 8 43 53 91 355PU0730 h355HPU0730 h
7.40 +0.021/+0.006 8 43 53 91 355PU0740 h355HPU0740 h
7.45 +0.021/+0.006 8 43 53 91 355HPU0745 h
7.50 +0.021/+0.006 8 43 53 91 355PU0750 h355HPU0750 h
7.60 +0.021/+0.006 8 43 53 91 355PU0760 h355HPU0760 h
7.70 +0.021/+0.006 8 43 53 91 355PU0770 h355HPU0770 h
7.80 +0.021/+0.006 8 43 53 91 355PU0780 h355HPU0780 h
7.90 +0.021/+0.006 8 43 53 91 355PU0790 h355HPU0790 h
8.00 +0.021/+0.006 8 43 53 91 355PU0800 h355HPU0800 h
8.10 +0.021/+0.006 10 49 61 103 355PU0810 h355HPU0810 h
8.20 +0.021/+0.006 10 49 61 103 355PU0820 h355HPU0820 h
8.30 +0.021/+0.006 10 49 61 103 355PU0830 h355HPU0830 h
8.40 +0.021/+0.006 10 49 61 103 355PU0840 h355HPU0840 h
8.50 +0.021/+0.006 10 49 61 103 355PU0850 h355HPU0850 h
8.60 +0.021/+0.006 10 49 61 103 355PU0860 h355HPU0860 h
8.70 +0.021/+0.006 10 49 61 103 355PU0870 h355HPU0870 h
8.80 +0.021/+0.006 10 49 61 103 355PU0880 h355HPU0880 h
8.90 +0.021/+0.006 10 49 61 103 355PU0890 h355HPU0890 h
9.00 +0.021/+0.006 10 49 61 103 355PU0900 h355HPU0900 h
9.10 +0.021/+0.006 10 49 61 103 355PU0910 h355HPU0910 h
9.20 +0.021/+0.006 10 49 61 103 355PU0920 h355HPU0920 h
9.25 +0.021/+0.006 10 49 61 103 355HPU0925 h
9.30 +0.021/+0.006 10 49 61 103 355PU0930 h355HPU0930 h
9.40 +0.021/+0.006 10 49 61 103 355PU0940 h355HPU0940 h
9.45 +0.021/+0.006 10 49 61 103 355HPU0945 h
9.50 +0.021/+0.006 10 61 61 103 355PU0950 h355HPU0950 h
9.60 +0.021/+0.006 10 61 61 103 355PU0960 h355HPU0960 h
9.70 +0.021/+0.006 10 61 61 103 355PU0970 h355HPU0970 h
9.80 +0.021/+0.006 10 61 61 103 355PU0980 h355HPU0980 h
9.90 +0.021/+0.006 10 61 61 103 355PU0990 h355HPU0990 h
10.00 +0.021/+0.006 10 61 61 103 355PU1000 h355HPU1000 h
10.10 +0.025/+0.007 12 71 71 118 355PU1010 h355HPU1010 h
h stock standard f non-standard stock m stock exhaustion
TYPHOON - high performance solid carbide drills
94
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
PU-HPU
D(m7) D Tol. d(h6) l l1 L EDP No. Stock EDP No. Stock
10.20 +0.025/+0.007 12 71 71 118 355PU1020 h355HPU1020 h
10.30 +0.025/+0.007 12 71 71 118 355PU1030 h355HPU1030 h
10.40 +0.025/+0.007 12 71 71 118 355PU1040 h355HPU1040 h
10.50 +0.025/+0.007 12 71 71 118 355PU1050 h355HPU1050 h
10.60 +0.025/+0.007 12 71 71 118 355PU1060 h355HPU1060 h
10.70 +0.025/+0.007 12 71 71 118 355PU1070 h355HPU1070 h
10.80 +0.025/+0.007 12 71 71 118 355PU1080 h355HPU1080 h
10.90 +0.025/+0.007 12 71 71 118 355PU1090 h355HPU1090 h
11.00 +0.025/+0.007 12 71 71 118 355PU1100 h355HPU1100 h
11.10 +0.025/+0.007 12 71 71 118 355PU1110 h355HPU1110 h
11.20 +0.025/+0.007 12 71 71 118 355PU1120 h355HPU1120 h
11.25 +0.025/+0.007 12 71 71 118 355HPU1125 h
11.30 +0.025/+0.007 12 71 71 118 355PU1130 h355HPU1130 h
11.40 +0.025/+0.007 12 71 71 118 355PU1140 h355HPU1140 h
11.50 +0.025/+0.007 12 71 71 118 355PU1150 h355HPU1150 h
11.60 +0.025/+0.007 12 71 71 118 355PU1160 h355HPU1160 h
11.70 +0.025/+0.007 12 71 71 118 355PU1170 h355HPU1170 h
11.80 +0.025/+0.007 12 71 71 118 355PU1180 h355HPU1180 h
11.90 +0.025/+0.007 12 71 71 118 355PU1190 h355HPU1190 h
12.00 +0.025/+0.007 12 71 71 118 355PU1200 h355HPU1200 h
12.10 +0.025/+0.007 14 77 77 124 355PU1210 h355HPU1210 h
12.20 +0.025/+0.007 14 77 77 124 355PU1220 h355HPU1220 h
12.30 +0.025/+0.007 14 77 77 124 355HPU1230 h
12.40 +0.025/+0.007 14 77 77 124 355HPU1240 h
12.50 +0.025/+0.007 14 77 77 124 355PU1250 h355HPU1250 h
12.60 +0.025/+0.007 14 77 77 124 355HPU1260 h
12.70 +0.025/+0.007 14 77 77 124 355PU1270 h355HPU1270 h
12.80 +0.025/+0.007 14 77 77 124 355PU1280 h355HPU1280 h
12.90 +0.025/+0.007 14 77 77 124 355HPU1290 h
13.00 +0.025/+0.007 14 77 77 124 355PU1300 h355HPU1300 h
13.10 +0.025/+0.007 14 77 77 124 355PU1310 h355HPU1310 h
13.20 +0.025/+0.007 14 77 77 124 355PU1320 h355HPU1320 h
13.30 +0.025/+0.007 14 77 77 124 355PU1330 h355HPU1330 h
13.40 +0.025/+0.007 14 77 77 124 355HPU1340 h
13.50 +0.025/+0.007 14 77 77 124 355PU1350 h355HPU1350 h
13.60 +0.025/+0.007 14 77 77 124 355HPU1360 h
13.70 +0.025/+0.007 14 77 77 124 355PU1370 h355HPU1370 h
13.80 +0.025/+0.007 14 77 77 124 355PU1380 h355HPU1380 h
13.90 +0.025/+0.007 14 77 77 124 355HPU1390 h
h stock standard f non-standard stock m stock exhaustion
355PU-355HPU
universal application, high productivity,
PU and HPU (throughcoolant)
5XD DIN
6537L
140°+C45°
355PU 355HPU
355PU
355HPU
PMKNSH
+++,+
+ 1st choice , suitable
355PU 355HPU
C45°
C45°
355PU
355HPU
TYPHOON - high performance solid carbide drills
95
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
PU-HPU
D(m7) D Tol. d(h6) l l1 L EDP No. Stock EDP No. Stock
14.00 +0.025/+0.007 14 77 77 124 355PU1400 h355HPU1400 h
14.10 +0.025/+0.007 16 83 83 133 355HPU1410 h
14.20 +0.025/+0.007 16 83 83 133 355HPU1420 h
14.30 +0.025/+0.007 16 83 83 133 355HPU1430 h
14.40 +0.025/+0.007 16 83 83 133 355HPU1440 h
14.50 +0.025/+0.007 16 83 83 133 355PU1450 h355HPU1450 h
14.60 +0.025/+0.007 16 83 83 133 355HPU1460 h
14.70 +0.025/+0.007 16 83 83 133 355HPU1470 h
14.80 +0.025/+0.007 16 83 83 133 355HPU1480 h
14.90 +0.025/+0.007 16 83 83 133 355HPU1490 h
15.00 +0.025/+0.007 16 83 83 133 355PU1500 h355HPU1500 h
15.10 +0.025/+0.007 16 83 83 133 355HPU1510 h
15.20 +0.025/+0.007 16 83 83 133 355HPU1520 h
15.30 +0.025/+0.007 16 83 83 133 355PU1530 h355HPU1530 h
15.40 +0.025/+0.007 16 83 83 133 355HPU1540 h
15.50 +0.025/+0.007 16 83 83 133 355PU1550 h355HPU1550 h
15.60 +0.025/+0.007 16 83 83 133 355HPU1560 h
15.70 +0.025/+0.007 16 83 83 133 355HPU1570 h
15.80 +0.025/+0.007 16 83 83 133 355PU1580 h355HPU1580 h
15.90 +0.025/+0.007 16 83 83 133 355HPU1590 h
16.00 +0.025/+0.007 16 83 83 133 355PU1600 h355HPU1600 h
16.10 +0.025/+0.007 18 93 93 143 355HPU1610 h
16.20 +0.025/+0.007 18 93 93 143 355HPU1620 h
16.30 +0.025/+0.007 18 93 93 143 355HPU1630 h
16.40 +0.025/+0.007 18 93 93 143 355HPU1640 h
16.50 +0.025/+0.007 18 93 93 143 355PU1650 h355HPU1650 h
16.60 +0.025/+0.007 18 93 93 143 355HPU1660 h
16.70 +0.025/+0.007 18 93 93 143 355HPU1670 h
16.80 +0.025/+0.007 18 93 93 143 355HPU1680 h
16.90 +0.025/+0.007 18 93 93 143 355HPU1690 h
17.00 +0.025/+0.007 18 93 93 143 355PU1700 h355HPU1700 h
17.10 +0.025/+0.007 18 93 93 143 355HPU1710 h
17.20 +0.025/+0.007 18 93 93 143 355HPU1720 h
17.30 +0.025/+0.007 18 93 93 143 355HPU1730 h
17.40 +0.025/+0.007 18 93 93 143 355HPU1740 h
17.50 +0.025/+0.007 18 93 93 143 355PU1750 h355HPU1750 h
17.60 +0.025/+0.007 18 93 93 143 355HPU1760 h
17.70 +0.025/+0.007 18 93 93 143 355HPU1770 h
17.80 +0.025/+0.007 18 93 93 143 355HPU1780 h
h stock standard f non-standard stock m stock exhaustion
355PU-355HPU
universal application, high productivity,
PU and HPU (throughcoolant)
5XD DIN
6537L
140°+C45°
355PU 355HPU
355PU
355HPU
PMKNSH
+++,+
+ 1st choice , suitable
355PU 355HPU
C45°
C45°
355PU
355HPU
TYPHOON - high performance solid carbide drills
96
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
PU-HPU
D(m7) D Tol. d(h6) l l1 L EDP No. Stock EDP No. Stock
17.90 +0.025/+0.007 18 93 93 143 355HPU1790 h
18.00 +0.025/+0.007 18 93 93 143 355PU1800 h355HPU1800 h
18.10 +0.029/+0.008 20 101 101 153 355HPU1810 h
18.20 +0.029/+0.008 20 101 101 153 355HPU1820 h
18.30 +0.029/+0.008 20 101 101 153 355HPU1830 h
18.40 +0.029/+0.008 20 101 101 153 355HPU1840 h
18.50 +0.029/+0.008 20 101 101 153 355PU1850 h355HPU1850 h
18.60 +0.029/+0.008 20 101 101 153 355HPU1860 h
18.70 +0.029/+0.008 20 101 101 153 355HPU1870 h
18.80 +0.029/+0.008 20 101 101 153 355HPU1880 h
18.90 +0.029/+0.008 20 101 101 153 355HPU1890 h
19.00 +0.029/+0.008 20 101 101 153 355PU1900 h355HPU1900 h
19.10 +0.029/+0.008 20 101 101 153 355HPU1910 h
19.20 +0.029/+0.008 20 101 101 153 355HPU1920 h
19.30 +0.029/+0.008 20 101 101 153 355HPU1930 h
19.40 +0.029/+0.008 20 101 101 153 355HPU1940 h
19.50 +0.029/+0.008 20 101 101 153 355PU1950 h355HPU1950 h
19.60 +0.029/+0.008 20 101 101 153 355HPU1960 h
19.70 +0.029/+0.008 20 101 101 153 355HPU1970 h
19.80 +0.029/+0.008 20 101 101 153 355HPU1980 h
19.90 +0.029/+0.008 20 101 101 153 355HPU1990 h
20.00 +0.029/+0.008 20 101 101 153 355PU2000 h355HPU2000 h
h stock standard f non-standard stock m stock exhaustion
355PU-355HPU
universal application, high productivity,
PU and HPU (throughcoolant)
5XD DIN
6537L
140°+C45°
355PU 355HPU
355PU
355HPU
PMKNSH
+++,+
+ 1st choice , suitable
355PU 355HPU
C45°
C45°
355PU
355HPU
TYPHOON - high performance solid carbide drills
97
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
PU-HPU
CUTTING PARAMETERS
355PU
Ø RUN OUT
<0.02mm
Material Group
ISO 513 P1 P2 P3 P4 P5 P6
Hardness/Rm 500-700 N/mm² 600-1000 N/mm² 900-1200 N/mm² 1200-1400 N/mm²
Vc (m/min) 100-120 80-100 50-70 30-50
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
311680 0.094 1090 9550 0.075 710 6370 0.065 420 4250 0.047 200
48760 0.102 890 7170 0.082 590 4780 0.071 340 3180 0.051 160
57010 0.111 770 5730 0.088 510 3820 0.077 300 2550 0.055 140
65840 0.123 720 4780 0.099 470 3180 0.086 270 2120 0.062 130
75000 0.136 680 4090 0.109 440 2730 0.095 260 1820 0.068 120
84380 0.149 650 3580 0.119 430 2390 0.104 250 1590 0.074 120
93890 0.162 630 3180 0.129 410 2120 0.113 240 1420 0.081 110
10 3500 0.174 610 2870 0.139 400 1910 0.122 230 1270 0.087 110
11 3180 0.187 590 2610 0.150 390 1740 0.131 230 1160 0.094 110
12 2920 0.204 600 2390 0.163 390 1590 0.143 230 1060 0.102 110
13 2690 0.221 590 2200 0.177 390 1470 0.155 230 980 0.111 110
14 2500 0.242 610 2050 0.194 400 1360 0.170 230 910 0.121 110
15 2340 0.264 620 1910 0.211 400 1270 0.184 230 850 0.132 110
16 2190 0.285 620 1790 0.228 410 1190 0.199 240 800 0.142 110
17 2060 0.306 630 1690 0.245 410 1120 0.214 240 750 0.153 110
18 1950 0.327 640 1590 0.262 420 1060 0.229 240 710 0.164 120
19 1840 0.349 640 1510 0.279 420 1010 0.244 250 670 0.174 120
20 1750 0.370 650 1430 0.296 420 960 0.259 250 640 0.185 120
355HPU
Ø RUN OUT
<0.02mm
Material Group
ISO 513 P1 P2 P3 P4 P5 P6
Hardness/Rm 500-700 N/mm² 600-1000 N/mm² 900-1200 N/mm² 1200-1400 N/mm²
Vc (m/min) 130-150 110-130 80-100 50-70
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
314860 0.108 1600 12740 0.081 1030 9550 0.065 620 6370 0.054 340
411150 0.127 1420 9550 0.095 910 7170 0.076 550 4780 0.064 300
58920 0.147 1310 7640 0.110 840 5730 0.088 500 3820 0.073 280
67430 0.166 1230 6370 0.125 790 4780 0.100 480 3180 0.083 260
76370 0.186 1180 5460 0.139 760 4090 0.111 460 2730 0.093 250
85570 0.205 1140 4780 0.154 740 3580 0.123 440 2390 0.103 250
94950 0.225 1110 4250 0.169 720 3180 0.135 430 2120 0.112 240
10 4460 0.244 1090 3820 0.183 700 2870 0.147 420 1910 0.122 230
11 4050 0.254 1030 3470 0.191 660 2610 0.152 400 1740 0.127 220
12 3720 0.274 1020 3180 0.205 650 2390 0.164 390 1590 0.137 220
13 3430 0.293 1010 2940 0.220 650 2200 0.176 390 1470 0.147 220
14 3180 0.313 990 2730 0.235 640 2050 0.188 380 1360 0.156 210
15 2970 0.332 990 2550 0.249 640 1910 0.199 380 1270 0.166 210
16 2790 0.352 980 2390 0.264 630 1790 0.211 380 1190 0.176 210
17 2620 0.362 950 2250 0.271 610 1690 0.217 370 1120 0.181 200
18 2480 0.371 920 2120 0.279 590 1590 0.223 350 1060 0.186 200
19 2350 0.381 900 2010 0.286 570 1510 0.229 350 1010 0.191 190
20 2230 0.391 870 1910 0.293 560 1430 0.235 340 960 0.196 190
TYPHOON - high performance solid carbide drills
98
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
PU-HPU
CUTTING PARAMETERS
355PU
Ø RUN OUT
<0.02mm
Material Group
ISO 513 M1 M2 M3 M4 M5
Hardness/Rm < 750 N/mm² 550-850 N/mm² 650-950 N/mm² 850-1200 N/mm²
Vc (m/min) 40-50 30-40 25-35 20-30
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
34780 0.065 310 3720 0.052 190 3180 0.046 150 2650 0.033 90
43580 0.071 260 2790 0.057 160 2390 0.050 120 1990 0.036 70
52870 0.077 220 2230 0.062 140 1910 0.054 100 1590 0.039 60
62390 0.086 210 1860 0.069 130 1590 0.060 100 1330 0.043 60
72050 0.095 200 1590 0.076 120 1360 0.067 90 1140 0.048 50
81790 0.104 190 1390 0.083 120 1190 0.073 90 1000 0.052 50
91590 0.113 180 1240 0.090 110 1060 0.079 80 880 0.057 50
10 1430 0.122 170 1110 0.098 110 960 0.085 80 800 0.061 50
11 1300 0.131 170 1010 0.105 110 870 0.092 80 720 0.065 50
12 1190 0.143 170 930 0.114 110 800 0.100 80 660 0.071 50
13 1100 0.155 170 860 0.124 110 730 0.108 80 610 0.077 50
14 1020 0.170 170 800 0.136 110 680 0.119 80 570 0.085 50
15 960 0.184 180 740 0.148 110 640 0.129 80 530 0.092 50
16 900 0.199 180 700 0.159 110 600 0.140 80 500 0.100 50
17 840 0.214 180 660 0.171 110 560 0.150 80 470 0.107 50
18 800 0.229 180 620 0.183 110 530 0.160 80 440 0.115 50
19 750 0.244 180 590 0.195 120 500 0.171 90 420 0.122 50
20 720 0.259 190 560 0.207 120 480 0.181 90 400 0.129 50
355HPU
Ø RUN OUT
<0.02mm
Material Group
ISO 513 M1 M2 M3 M4 M5
Hardness/Rm < 750 N/mm² 550-850 N/mm² 650-950 N/mm² 850-1200 N/mm²
Vc (m/min) 50-70 40-60 30-40 20-30
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
36370 0.070 450 5310 0.056 300 3720 0.049 180 2650 0.042 110
44780 0.083 390 3980 0.066 260 2790 0.058 160 1990 0.050 100
53820 0.095 360 3180 0.076 240 2230 0.067 150 1590 0.057 90
63180 0.108 340 2650 0.086 230 1860 0.076 140 1330 0.065 90
72730 0.121 330 2270 0.097 220 1590 0.085 130 1140 0.072 80
82390 0.133 320 1990 0.107 210 1390 0.093 130 1000 0.080 80
92120 0.146 310 1770 0.117 210 1240 0.102 130 880 0.088 80
10 1910 0.159 300 1590 0.127 200 1110 0.111 120 800 0.095 80
11 1740 0.165 290 1450 0.132 190 1010 0.116 120 720 0.099 70
12 1590 0.178 280 1330 0.142 190 930 0.125 120 660 0.107 70
13 1470 0.191 280 1220 0.152 190 860 0.133 110 610 0.114 70
14 1360 0.203 280 1140 0.163 190 800 0.142 110 570 0.122 70
15 1270 0.216 270 1060 0.173 180 740 0.151 110 530 0.130 70
16 1190 0.229 270 1000 0.183 180 700 0.160 110 500 0.137 70
17 1120 0.235 260 940 0.188 180 660 0.165 110 470 0.141 70
18 1060 0.241 260 880 0.193 170 620 0.169 100 440 0.145 60
19 1010 0.248 250 840 0.198 170 590 0.173 100 420 0.149 60
20 960 0.254 240 800 0.203 160 560 0.178 100 400 0.152 60
TYPHOON - high performance solid carbide drills
99
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
PU-HPU
CUTTING PARAMETERS
355PU
Ø RUN OUT
<0.02mm
Material Group
ISO 513 K1 K2 K3 K4
Hardness/Rm 150-250 HB 150-350 HB 120-260 HB 250-500 HB
Vc (m/min) 100-120 80-100 50-70 30-50
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
311680 0.094 1090 9550 0.075 710 6370 0.065 420 4250 0.047 200
48760 0.102 890 7170 0.082 590 4780 0.071 340 3180 0.051 160
57010 0.111 770 5730 0.088 510 3820 0.077 300 2550 0.055 140
65840 0.123 720 4780 0.099 470 3180 0.086 270 2120 0.062 130
75000 0.136 680 4090 0.109 440 2730 0.095 260 1820 0.068 120
84380 0.149 650 3580 0.119 430 2390 0.104 250 1590 0.074 120
93890 0.162 630 3180 0.129 410 2120 0.113 240 1420 0.081 110
10 3500 0.174 610 2870 0.139 400 1910 0.122 230 1270 0.087 110
11 3180 0.187 590 2610 0.150 390 1740 0.131 230 1160 0.094 110
12 2920 0.204 600 2390 0.163 390 1590 0.143 230 1060 0.102 110
13 2690 0.221 590 2200 0.177 390 1470 0.155 230 980 0.111 110
14 2500 0.242 610 2050 0.194 400 1360 0.170 230 910 0.121 110
15 2340 0.264 620 1910 0.211 400 1270 0.184 230 850 0.132 110
16 2190 0.285 620 1790 0.228 410 1190 0.199 240 800 0.142 110
17 2060 0.306 630 1690 0.245 410 1120 0.214 240 750 0.153 110
18 1950 0.327 640 1590 0.262 420 1060 0.229 240 710 0.164 120
19 1840 0.349 640 1510 0.279 420 1010 0.244 250 670 0.174 120
20 1750 0.370 650 1430 0.296 420 960 0.259 250 640 0.185 120
355HPU
Ø RUN OUT
<0.02mm
Material Group
ISO 513 K1 K2 K3 K4
Hardness/Rm 150-250 HB 150-350 HB 120-260 HB 250-500 HB
Vc (m/min) 110-130 90-110 65-85 45-65
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
312740 0.108 1370 10620 0.097 1030 7960 0.086 680 5840 0.075 440
49550 0.127 1210 7960 0.114 910 5970 0.102 610 4380 0.089 390
57640 0.147 1120 6370 0.132 840 4780 0.117 560 3500 0.103 360
66370 0.166 1060 5310 0.150 790 3980 0.133 530 2920 0.116 340
75460 0.186 1010 4550 0.167 760 3410 0.149 510 2500 0.130 330
84780 0.205 980 3980 0.185 740 2990 0.164 490 2190 0.144 310
94250 0.225 960 3540 0.202 720 2650 0.180 480 1950 0.157 310
10 3820 0.244 930 3180 0.220 700 2390 0.196 470 1750 0.171 300
11 3470 0.254 880 2900 0.229 660 2170 0.203 440 1590 0.178 280
12 3180 0.274 870 2650 0.246 650 1990 0.219 440 1460 0.192 280
13 2940 0.293 860 2450 0.264 650 1840 0.235 430 1350 0.205 280
14 2730 0.313 850 2270 0.282 640 1710 0.250 430 1250 0.219 270
15 2550 0.332 850 2120 0.299 630 1590 0.266 420 1170 0.233 270
16 2390 0.352 840 1990 0.317 630 1490 0.282 420 1090 0.246 270
17 2250 0.362 810 1870 0.326 610 1410 0.289 410 1030 0.253 260
18 2120 0.371 790 1770 0.334 590 1330 0.297 400 970 0.260 250
19 2010 0.381 770 1680 0.343 580 1260 0.305 380 920 0.267 250
20 1910 0.391 750 1590 0.352 560 1190 0.313 370 880 0.274 240
TYPHOON - high performance solid carbide drills
100
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
PU-HPU
CUTTING PARAMETERS
355PU
Ø RUN OUT
<0.02mm
Material Group
ISO 513 N1 > 5%Si N2 N3 N4
Hardness/Rm
Vc (m/min) 200-240 180-220 140-180
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
323350 0.112 2620 21230 0.101 2140 16990 0.090 1530
417520 0.122 2140 15920 0.110 1750 12740 0.098 1250
514010 0.133 1860 12740 0.119 1520 10190 0.106 1080
611680 0.148 1730 10620 0.133 1410 8490 0.118 1000
710010 0.163 1630 9100 0.147 1340 7280 0.131 950
88760 0.179 1560 7960 0.161 1280 6370 0.143 910
97780 0.194 1510 7080 0.174 1230 5660 0.155 880
10 7010 0.209 1470 6370 0.188 1200 5100 0.167 850
11 6370 0.224 1430 5790 0.202 1170 4630 0.180 830
12 5840 0.245 1430 5310 0.220 1170 4250 0.196 830
13 5390 0.265 1430 4900 0.239 1170 3920 0.212 830
14 5000 0.291 1450 4550 0.262 1190 3640 0.233 850
15 4670 0.316 1480 4250 0.285 1210 3400 0.253 860
16 4380 0.342 1500 3980 0.308 1220 3180 0.273 870
17 4120 0.367 1510 3750 0.330 1240 3000 0.294 880
18 3890 0.393 1530 3540 0.353 1250 2830 0.314 890
19 3690 0.418 1540 3350 0.376 1260 2680 0.335 900
20 3500 0.444 1550 3180 0.399 1270 2550 0.355 910
355HPU
Ø RUN OUT
<0.02mm
Material Group
ISO 513 N1 > 5%Si N2 N3 N4
Hardness/Rm
Vc (m/min) 230-270 210-250 170-210
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
326540 0.129 3420 24420 0.116 2840 20170 0.090 1820
419900 0.152 3030 18310 0.137 2510 15130 0.107 1620
515920 0.176 2800 14650 0.158 2320 12100 0.123 1490
613270 0.199 2650 12210 0.179 2190 10080 0.140 1410
711370 0.223 2530 10460 0.201 2100 8640 0.156 1350
89950 0.246 2450 9160 0.222 2030 7560 0.172 1300
98850 0.270 2390 8140 0.243 1980 6720 0.189 1270
10 7960 0.293 2330 7320 0.264 1930 6050 0.205 1240
11 7240 0.305 2210 6660 0.274 1830 5500 0.213 1170
12 6630 0.328 2180 6100 0.296 1800 5040 0.230 1160
13 6120 0.352 2150 5630 0.317 1780 4650 0.246 1150
14 5690 0.375 2140 5230 0.338 1770 4320 0.263 1140
15 5310 0.399 2120 4880 0.359 1750 4030 0.279 1130
16 4980 0.422 2100 4580 0.380 1740 3780 0.296 1120
17 4680 0.434 2030 4310 0.391 1680 3560 0.304 1080
18 4420 0.446 1970 4070 0.401 1630 3360 0.312 1050
19 4190 0.457 1920 3860 0.412 1590 3180 0.320 1020
20 3980 0.469 1870 3660 0.422 1550 3030 0.328 1000
TYPHOON - high performance solid carbide drills
101
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
PU-HPU
CUTTING PARAMETERS
355PU
Ø RUN OUT
<0.02mm
Material Group
ISO 513 S1 S2 S3 S4 S5
Hardness/Rm < 35 HRC 35-45 HRC
Vc (m/min) 25-35 15-25 30-40 20-30
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
33180 0.042 130 2120 0.029 60 3720 0.040 150 2650 0.034 90
42390 0.046 110 1590 0.032 50 2790 0.044 120 1990 0.037 70
51910 0.050 90 1270 0.035 40 2230 0.047 110 1590 0.040 60
61590 0.055 90 1060 0.039 40 1860 0.053 100 1330 0.044 60
71360 0.061 80 910 0.043 40 1590 0.058 90 1140 0.049 60
81190 0.067 80 800 0.047 40 1390 0.064 90 1000 0.054 50
91060 0.073 80 710 0.051 40 1240 0.069 90 880 0.058 50
10 960 0.078 80 640 0.055 40 1110 0.074 80 800 0.063 50
11 870 0.084 70 580 0.059 30 1010 0.080 80 720 0.067 50
12 800 0.092 70 530 0.064 30 930 0.087 80 660 0.073 50
13 730 0.099 70 490 0.070 30 860 0.094 80 610 0.080 50
14 680 0.109 70 450 0.076 30 800 0.104 80 570 0.087 50
15 640 0.119 80 420 0.083 30 740 0.113 80 530 0.095 50
16 600 0.128 80 400 0.090 40 700 0.122 90 500 0.103 50
17 560 0.138 80 370 0.096 40 660 0.131 90 470 0.110 50
18 530 0.147 80 350 0.103 40 620 0.140 90 440 0.118 50
19 500 0.157 80 340 0.110 40 590 0.149 90 420 0.125 50
20 480 0.166 80 320 0.116 40 560 0.158 90 400 0.133 50
355HPU
Ø RUN OUT
<0.02mm
Material Group
ISO 513 S1 S2 S3 S4 S5
Hardness/Rm < 35 HRC 35-45 HRC
Vc (m/min) 35-55 20-40 45-65 35-55
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
34780 0.048 230 3180 0.034 110 5840 0.046 270 4780 0.039 190
43580 0.057 200 2390 0.040 100 4380 0.054 240 3580 0.046 160
52870 0.066 190 1910 0.046 90 3500 0.063 220 2870 0.053 150
62390 0.075 180 1590 0.052 80 2920 0.071 210 2390 0.060 140
72050 0.084 170 1360 0.059 80 2500 0.079 200 2050 0.067 140
81790 0.092 170 1190 0.065 80 2190 0.088 190 1790 0.074 130
91590 0.101 160 1060 0.071 80 1950 0.096 190 1590 0.081 130
10 1430 0.110 160 960 0.077 70 1750 0.104 180 1430 0.088 130
11 1300 0.114 150 870 0.080 70 1590 0.109 170 1300 0.091 120
12 1190 0.123 150 800 0.086 70 1460 0.117 170 1190 0.099 120
13 1100 0.132 150 730 0.092 70 1350 0.125 170 1100 0.106 120
14 1020 0.141 140 680 0.099 70 1250 0.134 170 1020 0.113 110
15 960 0.150 140 640 0.105 70 1170 0.142 170 960 0.120 110
16 900 0.158 140 600 0.111 70 1090 0.150 160 900 0.127 110
17 840 0.163 140 560 0.114 60 1030 0.155 160 840 0.130 110
18 800 0.167 130 530 0.117 60 970 0.159 150 800 0.134 110
19 750 0.172 130 500 0.120 60 920 0.163 150 750 0.137 100
20 720 0.176 130 480 0.123 60 880 0.167 150 720 0.141 100
TYPHOON
PU-HPU
INFO
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
SUH
TYPHOON SUH
HIGH PERFORMANCE - STAINLESS STEEL
High performance tools for stainless steel (ISO M), steel
(ISOP), cast iron (ISO K) and HRSA super alloys (ISO S) below
45 HRC.
Punte ad alto rendimento per la foratura di acciaio
inossidabile (ISO M), acciaio (ISO P), ghisa (ISO K) e super leghe
(ISO S) sino a 45 HRC.
Hochleistungsbohrer für das Bohren von rostfreiem Stahl
(ISO M), Stahl (ISO P), Gusseisen (ISO K) und Superlegierungen
(ISO S) bis 45 HRC.
Forets haute performance pour le perçage de l’acier
inoxydable (ISO M), de l'acier (ISO P), de la fonte (ISO K) et des
super alliages (ISO S) jusqu’à 45 HRC.
Puntas de alto rendimiento para el taladro de acero
inoxidable (ISO M), acero (ISO P), hierro fundido (ISO K) e súper
aleaciones (ISO S) hasta 45 HRC.
Высокопроизводительный инструмент для обработки
нержавеющей стали (ISO M), стали (ISO P), чугуна (ISO K) и
жаропрочных сплавов (ISO S) с твёрдостью до 45 HRC.
104
TYPHOON
PU-HPU
INFO
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
SUH
104
TYPHOON SUH HIGH PERFORMANCE - STAINLESS STEEL
- Self-centering geometry: highly accurate
holes
- Straight cutting edge: short chips for easy
evacuation and high reliability
- Special edge design: high performance
and edge protection
- Back taper geometry: improves the cutting
efficiency
- Chip pocket finishing: highly polished to
reduce welding and improve chip ejection
- Large oil holes: improves coolant feed
- Substrate and coating: specifically selected
for high wear resistance, long and reliable
life
- Affûtage autocentré pour l’exécution de
trous précis
- Profil de l’arête droit et renforcé : il génère
des copeaux courts et garantit une grande
fiabilité
- Géométrie de l’arête avec affûtage
spécifique pour protéger l’arête et les
angles
- Géométrie du corps avec conicité arrière
pour faciliter l’action de coupe
- Finition des goujoures : polie pour
réduire le problème du collage et facilitent
l’évacuation des copeaux
- Trous de lubrification avec géométrie
modifiée pour un apport de lubrifiant plus
important
- Substrat et revêtement spécifiques pour
garantir durée et fiabilité
- Affilatura autocentrante per l’esecuzione di
fori precisi
- Profilo del tagliente diritto e rinforzato:
genera trucioli corti e garantisce grande
affidabilità
- Geometria del tagliente con affilatura
specifica a protezione del tagliente e degli
spigoli
- Geometria del corpo con conicità
posteriore per agevolare l’azione di taglio
- Finitura gole: lappate per ridurre il
problema dell’incollaggio e facilitare
l’evacuazione dei trucioli
- Fori di refrigerazione con geometria
modificata per un maggior apporto di
refrigerante
- Substrato e rivestimento specifici per
garantire durata e affidabilità
- Afilado autocentrante para la ejecución de
agujeros precisos
- Perfil del filo recto y reforzado: genera
virutas cortas y garantiza una gran fiabilidad
- Geometría del filo con afilado específico
para proteger el filo y los ángulos
- Geometría del cuerpo con conicidad
posterior para facilitar la acción de corte
- Acabado ranuras: lapeadas para reducir
el problema del encolado y facilitar la
evacuación de las virutas
- Agujeros de refrigeración con geometría
modificada para una mayor aportación de
refrigerante
- Sustrato y revestimiento específicos para
garantizar duración y fiabilidad
- Selbstzentrierender Schliff für die Herstellung
von präzisen Bohrungen
- Gerades und verstärktes Schneidkantenprofil:
zur Erzeugung kurzer Späne und zur
Gewährleistung hoher Zuverlässigkeit
- Geometrie der Schneidkante mit speziellem
Schliff zum Schutz von Schneidkante und
Kanten
- Geometrie des Körpers mit konischem
hinteren Bereich zur Erleichterung des
Schnittvorgangs
- Schlichtbearbeitung der Nuten: geläppt, um
Probleme durch Verkleben zu reduzieren und
um die Späneabführung zu erleichtern
- Kühlöffnungen mit abgeänderter Geometrie
für einen verbesserten Kühlmittelzufluss
- Spezielles Trägermaterial und spezielle
Beschichtung zur Gewährleistung von Standzeit
und Zuverlässigkeit
- Самоцентрирующаяся геометрия:
высокая точность отверстий
- Прямые режущие кромки:
формирование короткой стружки и
высокая надежность
- Геометрия режущей кромки со
специальной заточкой: высокая
производительность и защита кромок
- Геометрия с обратным конусом:
увеличивает эффективность обработки
- Отполированные стружечные канавки:
уменьшают вероятность приваривания
стружки и облегчают ее вывод
- Широкие каналы для СОЖ: увеличена
эффективность подвода СОЖ
- Специальное покрытие для повышения
стойкости инструмента
TYPHOON - high performance solid carbide drills
105
TYPHOON
PU-HPU
INFO
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
SUH
h stock standard f non-standard stock m stock exhaustion
D(m7) D Tol. d(h6) l l1 L EDP No. Stock
3.00 +0.012/+0.002 6 14 20 62 353SUH0300 h
3.10 +0.016/+0.004 6 14 20 62 353SUH0310 h
3.20 +0.016/+0.004 6 14 20 62 353SUH0320 h
3.30 +0.016/+0.004 6 14 20 62 353SUH0330 h
3.40 +0.016/+0.004 6 14 20 62 353SUH0340 h
3.50 +0.016/+0.004 6 14 20 62 353SUH0350 h
3.60 +0.016/+0.004 6 14 20 62 353SUH0360 h
3.70 +0.016/+0.004 6 14 20 62 353SUH0370 h
3.80 +0.016/+0.004 6 17 24 66 353SUH0380 h
3.90 +0.016/+0.004 6 17 24 66 353SUH0390 h
4.00 +0.016/+0.004 6 17 24 66 353SUH0400 h
4.10 +0.016/+0.004 6 17 24 66 353SUH0410 h
4.20 +0.016/+0.004 6 17 24 66 353SUH0420 h
4.30 +0.016/+0.004 6 17 24 66 353SUH0430 h
4.40 +0.016/+0.004 6 17 24 66 353SUH0440 h
4.50 +0.016/+0.004 6 17 24 66 353SUH0450 h
4.60 +0.016/+0.004 6 17 24 66 353SUH0460 h
4.70 +0.016/+0.004 6 17 24 66 353SUH0470 h
4.80 +0.016/+0.004 6 20 28 66 353SUH0480 h
4.90 +0.016/+0.004 6 20 28 66 353SUH0490 h
5.00 +0.016/+0.004 6 20 28 66 353SUH0500 h
5.10 +0.016/+0.004 6 20 28 66 353SUH0510 h
5.20 +0.016/+0.004 6 20 28 66 353SUH0520 h
5.30 +0.016/+0.004 6 20 28 66 353SUH0530 h
5.40 +0.016/+0.004 6 20 28 66 353SUH0540 h
5.50 +0.016/+0.004 6 20 28 66 353SUH0550 h
5.60 +0.016/+0.004 6 20 28 66 353SUH0560 h
5.70 +0.016/+0.004 6 20 28 66 353SUH0570 h
5.80 +0.016/+0.004 6 20 28 66 353SUH0580 h
5.90 +0.016/+0.004 6 20 28 66 353SUH0590 h
6.00 +0.016/+0.004 6 20 28 66 353SUH0600 h
6.10 +0.021/+0.006 8 24 34 79 353SUH0610 h
6.20 +0.021/+0.006 8 24 34 79 353SUH0620 h
6.30 +0.021/+0.006 8 24 34 79 353SUH0630 h
6.40 +0.021/+0.006 8 24 34 79 353SUH0640 h
6.50 +0.021/+0.006 8 24 34 79 353SUH0650 h
6.60 +0.021/+0.006 8 24 34 79 353SUH0660 h
6.70 +0.021/+0.006 8 24 34 79 353SUH0670 h
6.80 +0.021/+0.006 8 24 34 79 353SUH0680 h
353SUH
stainless steel, polished flutes, SUH (through coolant)
3XD DIN
6537K
PMKNSH
,+,,,
+ 1st choice , suitable
TYPHOON - high performance solid carbide drills
106
TYPHOON
PU-HPU
INFO
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
SUH
353SUH
stainless steel, polished flutes, SUH (through coolant)
3XD DIN
6537K
PMKNSH
,+,,,
+ 1st choice , suitable
h stock standard f non-standard stock m stock exhaustion
D(m7) D Tol. d(h6) l l1 L EDP No. Stock
6.90 +0.021/+0.006 8 24 34 79 353SUH0690 h
7.00 +0.021/+0.006 8 24 34 79 353SUH0700 h
7.10 +0.021/+0.006 8 29 41 79 353SUH0710 h
7.20 +0.021/+0.006 8 29 41 79 353SUH0720 h
7.30 +0.021/+0.006 8 29 41 79 353SUH0730 h
7.40 +0.021/+0.006 8 29 41 79 353SUH0740 h
7.50 +0.021/+0.006 8 29 41 79 353SUH0750 h
7.60 +0.021/+0.006 8 29 41 79 353SUH0760 h
7.70 +0.021/+0.006 8 29 41 79 353SUH0770 h
7.80 +0.021/+0.006 8 29 41 79 353SUH0780 h
7.90 +0.021/+0.006 8 29 41 79 353SUH0790 h
8.00 +0.021/+0.006 8 29 41 79 353SUH0800 h
8.10 +0.021/+0.006 10 35 47 89 353SUH0810 h
8.20 +0.021/+0.006 10 35 47 89 353SUH0820 h
8.30 +0.021/+0.006 10 35 47 89 353SUH0830 h
8.40 +0.021/+0.006 10 35 47 89 353SUH0840 h
8.50 +0.021/+0.006 10 35 47 89 353SUH0850 h
8.60 +0.021/+0.006 10 35 47 89 353SUH0860 h
8.70 +0.021/+0.006 10 35 47 89 353SUH0870 h
8.80 +0.021/+0.006 10 35 47 89 353SUH0880 h
8.90 +0.021/+0.006 10 35 47 89 353SUH0890 h
9.00 +0.021/+0.006 10 35 47 89 353SUH0900 h
9.10 +0.021/+0.006 10 35 47 89 353SUH0910 h
9.20 +0.021/+0.006 10 35 47 89 353SUH0920 h
9.30 +0.021/+0.006 10 35 47 89 353SUH0930 h
9.40 +0.021/+0.006 10 35 47 89 353SUH0940 h
9.50 +0.021/+0.006 10 35 47 89 353SUH0950 h
9.60 +0.021/+0.006 10 35 47 89 353SUH0960 h
9.70 +0.021/+0.006 10 35 47 89 353SUH0970 h
9.80 +0.021/+0.006 10 35 47 89 353SUH0980 h
9.90 +0.021/+0.006 10 35 47 89 353SUH0990 h
10.00 +0.021/+0.006 10 35 47 89 353SUH1000 h
10.20 +0.025/+0.007 12 40 55 102 353SUH1020 h
10.50 +0.025/+0.007 12 40 55 102 353SUH1050 h
10.80 +0.025/+0.007 12 40 55 102 353SUH1080 h
11.00 +0.025/+0.007 12 40 55 102 353SUH1100 h
11.20 +0.025/+0.007 12 40 55 102 353SUH1120 f
11.30 +0.025/+0.007 12 40 55 102 353SUH1130 f
11.50 +0.025/+0.007 12 40 55 102 353SUH1150 h
TYPHOON - high performance solid carbide drills
107
TYPHOON
PU-HPU
INFO
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
SUH
h stock standard f non-standard stock m stock exhaustion
D(m7) D Tol. d(h6) l l1 L EDP No. Stock
11.80 +0.025/+0.007 12 40 55 102 353SUH1180 h
12.00 +0.025/+0.007 12 40 55 102 353SUH1200 h
12.20 +0.025/+0.007 14 43 60 107 353SUH1220 h
12.50 +0.025/+0.007 14 43 60 107 353SUH1250 h
12.80 +0.025/+0.007 14 43 60 107 353SUH1280 h
13.00 +0.025/+0.007 14 43 60 107 353SUH1300 h
13.30 +0.025/+0.007 14 43 60 107 353SUH1330 h
13.50 +0.025/+0.007 14 43 60 107 353SUH1350 h
13.80 +0.025/+0.007 14 43 60 107 353SUH1380 h
14.00 +0.025/+0.007 14 43 60 107 353SUH1400 h
14.50 +0.025/+0.007 16 45 65 115 353SUH1450 h
15.00 +0.025/+0.007 16 65 65 115 353SUH1500 h
15.30 +0.025/+0.007 16 65 65 115 353SUH1530 h
15.50 +0.025/+0.007 16 65 65 115 353SUH1550 h
15.80 +0.025/+0.007 16 65 65 115 353SUH1580 h
16.00 +0.025/+0.007 16 65 65 115 353SUH1600 h
16.50 +0.025/+0.007 18 73 73 123 353SUH1650 h
17.00 +0.025/+0.007 18 73 73 123 353SUH1700 h
17.50 +0.025/+0.007 18 73 73 123 353SUH1750 h
18.00 +0.025/+0.007 18 73 73 123 353SUH1800 h
18.50 +0.029/+0.008 20 79 79 131 353SUH1850 h
19.00 +0.029/+0.008 20 79 79 131 353SUH1900 h
19.50 +0.029/+0.008 20 79 79 131 353SUH1950 h
20.00 +0.029/+0.008 20 79 79 131 353SUH2000 h
353SUH
stainless steel, polished flutes, SUH (through coolant)
3XD DIN
6537K
PMKNSH
,+,,,
+ 1st choice , suitable
TYPHOON - high performance solid carbide drills
108
TYPHOON
PU-HPU
INFO
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
SUH
CUTTING PARAMETERS
353SUH
Ø RUN OUT
<0.02mm
Material Group
ISO 513 P1 P2 P3 P4 P5 P6
Hardness/Rm 500-700 N/mm² 600-1000 N/mm² 900-1200 N/mm² 1200-1400 N/mm²
Vc (m/min) 130-150 100-140 80-100 55-75
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
314860 0.118 1760 12740 0.106 1360 9550 0.095 900 6900 0.083 570
411150 0.140 1560 9550 0.126 1200 7170 0.112 800 5180 0.098 510
58920 0.161 1440 7640 0.145 1110 5730 0.129 740 4140 0.113 470
67430 0.183 1360 6370 0.164 1050 4780 0.146 700 3450 0.128 440
76370 0.204 1300 5460 0.184 1000 4090 0.163 670 2960 0.143 420
85570 0.226 1260 4780 0.203 970 3580 0.181 650 2590 0.158 410
94950 0.247 1220 4250 0.223 950 3180 0.198 630 2300 0.173 400
10 4460 0.269 1200 3820 0.242 920 2870 0.215 620 2070 0.188 390
11 4050 0.280 1130 3470 0.252 870 2610 0.224 580 1880 0.196 370
12 3720 0.301 1120 3180 0.271 860 2390 0.241 580 1730 0.211 360
13 3430 0.323 1110 2940 0.290 850 2200 0.258 570 1590 0.226 360
14 3180 0.344 1090 2730 0.310 850 2050 0.275 560 1480 0.241 360
15 2970 0.366 1090 2550 0.329 840 1910 0.292 560 1380 0.256 350
16 2790 0.387 1080 2390 0.348 830 1790 0.310 550 1290 0.271 350
17 2620 0.398 1040 2250 0.358 810 1690 0.318 540 1220 0.278 340
18 2480 0.409 1010 2120 0.368 780 1590 0.327 520 1150 0.286 330
19 2350 0.419 990 2010 0.377 760 1510 0.335 510 1090 0.293 320
20 2230 0.430 960 1910 0.387 740 1430 0.344 490 1040 0.301 310
Ø RUN OUT
<0.02mm
Material Group
ISO 513 M1 M2 M3 M4 M5
Hardness/Rm < 750 N/mm² 550-850 N/mm² 650-950 N/mm² 850-1200 N/mm²
Vc (m/min) 50-70 40-60 30-40 20-30
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
36370 0.077 490 5310 0.061 330 3720 0.054 200 2650 0.046 120
44780 0.091 430 3980 0.073 290 2790 0.064 180 1990 0.055 110
53820 0.105 400 3180 0.084 270 2230 0.073 160 1590 0.063 100
63180 0.119 380 2650 0.095 250 1860 0.083 150 1330 0.071 90
72730 0.133 360 2270 0.106 240 1590 0.093 150 1140 0.080 90
82390 0.147 350 1990 0.117 230 1390 0.103 140 1000 0.088 90
92120 0.161 340 1770 0.129 230 1240 0.112 140 880 0.096 80
10 1910 0.175 330 1590 0.140 220 1110 0.122 140 800 0.105 80
11 1740 0.182 320 1450 0.145 210 1010 0.127 130 720 0.109 80
12 1590 0.196 310 1330 0.157 210 930 0.137 130 660 0.117 80
13 1470 0.210 310 1220 0.168 200 860 0.147 130 610 0.126 80
14 1360 0.224 300 1140 0.179 200 800 0.157 130 570 0.134 80
15 1270 0.238 300 1060 0.190 200 740 0.166 120 530 0.143 80
16 1190 0.252 300 1000 0.201 200 700 0.176 120 500 0.151 80
17 1120 0.259 290 940 0.207 190 660 0.181 120 470 0.155 70
18 1060 0.266 280 880 0.212 190 620 0.186 120 440 0.159 70
19 1010 0.273 280 840 0.218 180 590 0.191 110 420 0.164 70
20 960 0.280 270 800 0.224 180 560 0.196 110 400 0.168 70
TYPHOON - high performance solid carbide drills
109
TYPHOON
PU-HPU
INFO
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
SUH
CUTTING PARAMETERS
353SUH
Ø RUN OUT
<0.02mm
Material Group
ISO 513 K1 K2 K3 K4
Hardness/Rm 150-250 HB 150-350 HB 120-260 HB 250-500 HB
Vc (m/min) 110-130 90-110 70-90 55-75
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
312740 0.118 1510 10620 0.106 1130 8490 0.095 800 6900 0.083 570
49550 0.140 1330 7960 0.126 1000 6370 0.112 710 5180 0.098 510
57640 0.161 1230 6370 0.145 920 5100 0.129 660 4140 0.113 470
66370 0.183 1160 5310 0.164 870 4250 0.146 620 3450 0.128 440
75460 0.204 1120 4550 0.184 840 3640 0.163 590 2960 0.143 420
84780 0.226 1080 3980 0.203 810 3180 0.181 570 2590 0.158 410
94250 0.247 1050 3540 0.223 790 2830 0.198 560 2300 0.173 400
10 3820 0.269 1030 3180 0.242 770 2550 0.215 550 2070 0.188 390
11 3470 0.280 970 2900 0.252 730 2320 0.224 520 1880 0.196 370
12 3180 0.301 960 2650 0.271 720 2120 0.241 510 1730 0.211 360
13 2940 0.323 950 2450 0.290 710 1960 0.258 510 1590 0.226 360
14 2730 0.344 940 2270 0.310 700 1820 0.275 500 1480 0.241 360
15 2550 0.366 930 2120 0.329 700 1700 0.292 500 1380 0.256 350
16 2390 0.387 920 1990 0.348 690 1590 0.310 490 1290 0.271 350
17 2250 0.398 890 1870 0.358 670 1500 0.318 480 1220 0.278 340
18 2120 0.409 870 1770 0.368 650 1420 0.327 460 1150 0.286 330
19 2010 0.419 840 1680 0.377 630 1340 0.335 450 1090 0.293 320
20 1910 0.430 820 1590 0.387 620 1270 0.344 440 1040 0.301 310
Ø RUN OUT
<0.02mm
Material Group
ISO 513 N2 N4
Hardness/Rm
Vc (m/min) 180-220 160-200
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
321230 0.128 2710 19110 0.128 2440
415920 0.151 2400 14330 0.151 2160
512740 0.174 2220 11460 0.174 2000
610620 0.197 2100 9550 0.197 1880
79100 0.221 2010 8190 0.221 1810
87960 0.244 1940 7170 0.244 1750
97080 0.267 1890 6370 0.267 1700
10 6370 0.290 1850 5730 0.290 1660
11 5790 0.302 1750 5210 0.302 1570
12 5310 0.325 1730 4780 0.325 1550
13 4900 0.348 1710 4410 0.348 1540
14 4550 0.372 1690 4090 0.372 1520
15 4250 0.395 1680 3820 0.395 1510
16 3980 0.418 1660 3580 0.418 1500
17 3750 0.430 1610 3370 0.430 1450
18 3540 0.441 1560 3180 0.441 1400
19 3350 0.453 1520 3020 0.453 1370
20 3180 0.464 1480 2870 0.464 1330
TYPHOON - high performance solid carbide drills
110
TYPHOON
PU-HPU
INFO
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
SUH
CUTTING PARAMETERS
353SUH
Ø RUN OUT
<0.02mm
Material Group
ISO 513 S1 S2 S3 S4 S5
Hardness/Rm < 35 HRC 35-45 HRC
Vc (m/min) 30-50 20-40 45-65 35-55
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
34250 0.053 230 3180 0.037 120 5840 0.051 300 4780 0.043 200
43180 0.063 200 2390 0.044 110 4380 0.060 260 3580 0.050 180
52550 0.073 190 1910 0.051 100 3500 0.069 240 2870 0.058 170
62120 0.082 170 1590 0.058 90 2920 0.078 230 2390 0.066 160
71820 0.092 170 1360 0.064 90 2500 0.087 220 2050 0.074 150
81590 0.102 160 1190 0.071 80 2190 0.097 210 1790 0.081 150
91420 0.111 160 1060 0.078 80 1950 0.106 210 1590 0.089 140
10 1270 0.121 150 960 0.085 80 1750 0.115 200 1430 0.097 140
11 1160 0.126 150 870 0.088 80 1590 0.119 190 1300 0.101 130
12 1060 0.135 140 800 0.095 80 1460 0.129 190 1190 0.108 130
13 980 0.145 140 730 0.102 70 1350 0.138 190 1100 0.116 130
14 910 0.155 140 680 0.108 70 1250 0.147 180 1020 0.124 130
15 850 0.164 140 640 0.115 70 1170 0.156 180 960 0.132 130
16 800 0.174 140 600 0.122 70 1090 0.165 180 900 0.139 130
17 750 0.179 130 560 0.125 70 1030 0.170 180 840 0.143 120
18 710 0.184 130 530 0.129 70 970 0.175 170 800 0.147 120
19 670 0.189 130 500 0.132 70 920 0.179 160 750 0.151 110
20 640 0.194 120 480 0.135 70 880 0.155 140 720 0.155 110
TYPHOON - high performance solid carbide drills
111
TYPHOON
PU-HPU
INFO
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
SUH
h stock standard f non-standard stock m stock exhaustion
D(m7) D Tol. d(h6) l l1 L EDP No. Stock
3.00 +0.012/+0.002 6 23 28 66 355SUH0300 h
3.10 +0.016/+0.004 6 23 28 66 355SUH0310 h
3.20 +0.016/+0.004 6 23 28 66 355SUH0320 h
3.30 +0.016/+0.004 6 23 28 66 355SUH0330 h
3.40 +0.016/+0.004 6 23 28 66 355SUH0340 h
3.50 +0.016/+0.004 6 23 28 66 355SUH0350 h
3.60 +0.016/+0.004 6 23 28 66 355SUH0360 h
3.70 +0.016/+0.004 6 23 28 66 355SUH0370 h
3.80 +0.016/+0.004 6 29 36 74 355SUH0380 h
3.90 +0.016/+0.004 6 29 36 74 355SUH0390 h
4.00 +0.016/+0.004 6 29 36 74 355SUH0400 h
4.10 +0.016/+0.004 6 29 36 74 355SUH0410 h
4.20 +0.016/+0.004 6 29 36 74 355SUH0420 h
4.30 +0.016/+0.004 6 29 36 74 355SUH0430 h
4.40 +0.016/+0.004 6 29 36 74 355SUH0440 h
4.50 +0.016/+0.004 6 29 36 74 355SUH0450 h
4.60 +0.016/+0.004 6 29 36 74 355SUH0460 h
4.70 +0.016/+0.004 6 29 36 74 355SUH0470 h
4.80 +0.016/+0.004 6 35 44 82 355SUH0480 h
4.90 +0.016/+0.004 6 35 44 82 355SUH0490 h
5.00 +0.016/+0.004 6 35 44 82 355SUH0500 h
5.10 +0.016/+0.004 6 35 44 82 355SUH0510 h
5.20 +0.016/+0.004 6 35 44 82 355SUH0520 h
5.30 +0.016/+0.004 6 35 44 82 355SUH0530 h
5.40 +0.016/+0.004 6 35 44 82 355SUH0540 h
5.50 +0.016/+0.004 6 35 44 82 355SUH0550 h
5.60 +0.016/+0.004 6 35 44 82 355SUH0560 h
5.70 +0.016/+0.004 6 35 44 82 355SUH0570 h
5.80 +0.016/+0.004 6 35 44 82 355SUH0580 h
5.90 +0.016/+0.004 6 35 44 82 355SUH0590 h
6.00 +0.016/+0.004 6 35 44 82 355SUH0600 h
6.10 +0.021/+0.006 8 43 53 91 355SUH0610 h
6.20 +0.021/+0.006 8 43 53 91 355SUH0620 h
6.30 +0.021/+0.006 8 43 53 91 355SUH0630 h
6.40 +0.021/+0.006 8 43 53 91 355SUH0640 h
6.50 +0.021/+0.006 8 43 53 91 355SUH0650 h
6.60 +0.021/+0.006 8 43 53 91 355SUH0660 h
6.70 +0.021/+0.006 8 43 53 91 355SUH0670 h
6.80 +0.021/+0.006 8 43 53 91 355SUH0680 h
355SUH
stainless steel, polished flutes, SUH (through coolant)
5XD DIN
6537L
PMKNSH
,+,,,
+ 1st choice , suitable
TYPHOON - high performance solid carbide drills
112
TYPHOON
PU-HPU
INFO
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
SUH
355SUH
stainless steel, polished flutes, SUH (through coolant)
5XD DIN
6537L
PMKNSH
,+,,,
+ 1st choice , suitable
h stock standard f non-standard stock m stock exhaustion
D(m7) D Tol. d(h6) l l1 L EDP No. Stock
6.90 +0.021/+0.006 8 43 53 91 355SUH0690 h
7.00 +0.021/+0.006 8 43 53 91 355SUH0700 h
7.10 +0.021/+0.006 8 43 53 91 355SUH0710 h
7.20 +0.021/+0.006 8 43 53 91 355SUH0720 h
7.30 +0.021/+0.006 8 43 53 91 355SUH0730 h
7.40 +0.021/+0.006 8 43 53 91 355SUH0740 h
7.50 +0.021/+0.006 8 43 53 91 355SUH0750 h
7.60 +0.021/+0.006 8 43 53 91 355SUH0760 h
7.70 +0.021/+0.006 8 43 53 91 355SUH0770 h
7.80 +0.021/+0.006 8 43 53 91 355SUH0780 h
7.90 +0.021/+0.006 8 43 53 91 355SUH0790 h
8.00 +0.021/+0.006 8 43 53 91 355SUH0800 h
8.10 +0.021/+0.006 10 49 61 103 355SUH0810 h
8.20 +0.021/+0.006 10 49 61 103 355SUH0820 h
8.30 +0.021/+0.006 10 49 61 103 355SUH0830 h
8.40 +0.021/+0.006 10 49 61 103 355SUH0840 h
8.50 +0.021/+0.006 10 49 61 103 355SUH0850 h
8.60 +0.021/+0.006 10 49 61 103 355SUH0860 h
8.70 +0.021/+0.006 10 49 61 103 355SUH0870 h
8.80 +0.021/+0.006 10 49 61 103 355SUH0880 h
8.90 +0.021/+0.006 10 49 61 103 355SUH0890 h
9.00 +0.021/+0.006 10 49 61 103 355SUH0900 h
9.10 +0.021/+0.006 10 49 61 103 355SUH0910 h
9.20 +0.021/+0.006 10 49 61 103 355SUH0920 h
9.30 +0.021/+0.006 10 49 61 103 355SUH0930 h
9.40 +0.021/+0.006 10 49 61 103 355SUH0940 h
9.50 +0.021/+0.006 10 61 61 103 355SUH0950 h
9.60 +0.021/+0.006 10 61 61 103 355SUH0960 h
9.70 +0.021/+0.006 10 61 61 103 355SUH0970 h
9.80 +0.021/+0.006 10 61 61 103 355SUH0980 h
9.90 +0.021/+0.006 10 61 61 103 355SUH0990 h
10.00 +0.021/+0.006 10 61 61 103 355SUH1000 h
10.20 +0.025/+0.007 12 71 71 118 355SUH1020 h
10.30 +0.025/+0.007 12 71 71 118 355SUH1030 h
10.50 +0.025/+0.007 12 71 71 118 355SUH1050 h
10.80 +0.025/+0.007 12 71 71 118 355SUH1080 h
11.00 +0.025/+0.007 12 71 71 118 355SUH1100 h
11.20 +0.025/+0.007 12 71 71 118 355SUH1120 h
11.30 +0.025/+0.007 12 71 71 118 355SUH1130 h
TYPHOON - high performance solid carbide drills
113
TYPHOON
PU-HPU
INFO
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
SUH
h stock standard f non-standard stock m stock exhaustion
D(m7) D Tol. d(h6) l l1 L EDP No. Stock
11.50 +0.025/+0.007 12 71 71 118 355SUH1150 h
11.80 +0.025/+0.007 12 71 71 118 355SUH1180 h
12.00 +0.025/+0.007 12 71 71 118 355SUH1200 h
12.20 +0.025/+0.007 14 77 77 124 355SUH1220 h
12.50 +0.025/+0.007 14 77 77 124 355SUH1250 h
12.80 +0.025/+0.007 14 77 77 124 355SUH1280 h
13.00 +0.025/+0.007 14 77 77 124 355SUH1300 h
13.30 +0.025/+0.007 14 77 77 124 355SUH1330 h
13.50 +0.025/+0.007 14 77 77 124 355SUH1350 h
13.80 +0.025/+0.007 14 77 77 124 355SUH1380 h
14.00 +0.025/+0.007 14 77 77 124 355SUH1400 h
14.50 +0.025/+0.007 16 83 83 133 355SUH1450 h
15.00 +0.025/+0.007 16 83 83 133 355SUH1500 h
15.30 +0.025/+0.007 16 83 83 133 355SUH1530 h
15.50 +0.025/+0.007 16 83 83 133 355SUH1550 h
15.80 +0.025/+0.007 16 83 83 133 355SUH1580 h
16.00 +0.025/+0.007 16 83 83 133 355SUH1600 h
16.50 +0.025/+0.007 18 93 93 143 355SUH1650 h
17.00 +0.025/+0.007 18 93 93 143 355SUH1700 h
17.50 +0.025/+0.007 18 93 93 143 355SUH1750 h
18.00 +0.025/+0.007 18 93 93 143 355SUH1800 h
18.50 +0.029/+0.008 20 101 101 153 355SUH1850 h
19.00 +0.029/+0.008 20 101 101 153 355SUH1900 h
19.50 +0.029/+0.008 20 101 101 153 355SUH1950 h
20.00 +0.029/+0.008 20 101 101 153 355SUH2000 h
355SUH
stainless steel, polished flutes, SUH (through coolant)
5XD DIN
6537L
PMKNSH
,+,,,
+ 1st choice , suitable
TYPHOON - high performance solid carbide drills
114
TYPHOON
PU-HPU
INFO
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
SUH
CUTTING PARAMETERS
355SUH
Ø RUN OUT
<0.02mm
Material Group
ISO 513 P1 P2 P3 P4 P5 P6
Hardness/Rm 500-700 N/mm² 600-1000 N/mm² 900-1200 N/mm² 1200-1400 N/mm²
Vc (m/min) 120-140 100-120 70-90 45-65
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
313800 0.101 1390 11680 0.075 880 8490 0.060 510 5840 0.050 290
410350 0.119 1230 8760 0.089 780 6370 0.071 450 4380 0.059 260
58280 0.137 1130 7010 0.103 720 5100 0.082 420 3500 0.069 240
66900 0.155 1070 5840 0.117 680 4250 0.093 400 2920 0.078 230
75910 0.174 1030 5000 0.130 650 3640 0.104 380 2500 0.087 220
85180 0.192 990 4380 0.144 630 3180 0.115 370 2190 0.096 210
94600 0.210 970 3890 0.158 610 2830 0.126 360 1950 0.105 200
10 4140 0.228 950 3500 0.171 600 2550 0.137 350 1750 0.114 200
11 3760 0.238 890 3180 0.178 570 2320 0.143 330 1590 0.119 190
12 3450 0.256 880 2920 0.192 560 2120 0.154 330 1460 0.128 190
13 3180 0.274 870 2690 0.206 550 1960 0.164 320 1350 0.137 190
14 2960 0.292 870 2500 0.219 550 1820 0.175 320 1250 0.146 180
15 2760 0.311 860 2340 0.233 550 1700 0.186 320 1170 0.155 180
16 2590 0.329 850 2190 0.247 540 1590 0.197 310 1090 0.164 180
17 2440 0.338 820 2060 0.254 520 1500 0.203 300 1030 0.169 170
18 2300 0.347 800 1950 0.260 510 1420 0.208 300 970 0.174 170
19 2180 0.356 780 1840 0.267 490 1340 0.214 290 920 0.178 160
20 2070 0.366 760 1750 0.274 480 1270 0.219 280 880 0.183 160
Ø RUN OUT
<0.02mm
Material Group
ISO 513 M1 M3 M4 M5
Hardness/Rm < 750 N/mm² 550-850 N/mm² 650-950 N/mm² 850-1200 N/mm²
Vc (m/min) 40-60 30-50 25-35 15-25
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
35310 0.065 350 4250 0.052 220 3180 0.046 150 2120 0.039 80
43980 0.077 310 3180 0.062 200 2390 0.054 130 1590 0.046 70
53180 0.089 280 2550 0.071 180 1910 0.062 120 1270 0.053 70
62650 0.101 270 2120 0.081 170 1590 0.071 110 1060 0.061 60
72270 0.113 260 1820 0.090 160 1360 0.079 110 910 0.068 60
81990 0.125 250 1590 0.100 160 1190 0.087 100 800 0.075 60
91770 0.137 240 1420 0.109 160 1060 0.096 100 710 0.082 60
10 1590 0.148 240 1270 0.119 150 960 0.104 100 640 0.089 60
11 1450 0.154 220 1160 0.124 140 870 0.108 90 580 0.093 50
12 1330 0.166 220 1060 0.133 140 800 0.116 90 530 0.100 50
13 1220 0.178 220 980 0.143 140 730 0.125 90 490 0.107 50
14 1140 0.190 220 910 0.152 140 680 0.133 90 450 0.114 50
15 1060 0.202 210 850 0.162 140 640 0.141 90 420 0.121 50
16 1000 0.214 210 800 0.171 140 600 0.150 90 400 0.128 50
17 940 0.220 210 750 0.176 130 560 0.154 90 370 0.132 50
18 880 0.226 200 710 0.181 130 530 0.158 80 350 0.135 50
19 840 0.232 190 670 0.185 120 500 0.162 80 340 0.139 50
20 800 0.238 190 640 0.190 120 480 0.166 80 320 0.143 50
TYPHOON - high performance solid carbide drills
115
TYPHOON
PU-HPU
INFO
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
SUH
CUTTING PARAMETERS
355SUH
Ø RUN OUT
<0.02mm
Material Group
ISO 513 K1 K2 K3 K4
Hardness/Rm 150-250 HB 150-350 HB 120-260 HB 250-500 HB
Vc (m/min) 100-120 80-100 55-75 40-60
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
311680 0.101 1170 9550 0.090 860 6900 0.080 550 5310 0.070 370
48760 0.119 1040 7170 0.107 770 5180 0.095 490 3980 0.083 330
57010 0.137 960 5730 0.123 710 4140 0.110 450 3180 0.096 310
65840 0.155 910 4780 0.140 670 3450 0.124 430 2650 0.109 290
75000 0.174 870 4090 0.156 640 2960 0.139 410 2270 0.122 280
84380 0.192 840 3580 0.173 620 2590 0.154 400 1990 0.134 270
93890 0.210 820 3180 0.189 600 2300 0.168 390 1770 0.147 260
10 3500 0.228 800 2870 0.206 590 2070 0.183 380 1590 0.160 250
11 3180 0.238 760 2610 0.214 560 1880 0.190 360 1450 0.166 240
12 2920 0.256 750 2390 0.230 550 1730 0.205 350 1330 0.179 240
13 2690 0.274 740 2200 0.247 540 1590 0.219 350 1220 0.192 230
14 2500 0.292 730 2050 0.263 540 1480 0.234 350 1140 0.205 230
15 2340 0.311 730 1910 0.280 530 1380 0.249 340 1060 0.217 230
16 2190 0.329 720 1790 0.296 530 1290 0.263 340 1000 0.230 230
17 2060 0.338 700 1690 0.304 510 1220 0.270 330 940 0.237 220
18 1950 0.347 680 1590 0.313 500 1150 0.278 320 880 0.243 210
19 1840 0.356 660 1510 0.321 480 1090 0.285 310 840 0.249 210
20 1750 0.366 640 1430 0.329 470 1040 0.292 300 800 0.256 200
Ø RUN OUT
<0.02mm
Material Group
ISO 513 N2 N4
Hardness/Rm
Vc (m/min) 180-220 160-200
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
321230 0.109 2300 19110 0.096 1840
415920 0.128 2040 14330 0.114 1630
512740 0.148 1890 11460 0.132 1510
610620 0.168 1780 9550 0.149 1420
79100 0.188 1710 8190 0.167 1370
87960 0.207 1650 7170 0.184 1320
97080 0.227 1610 6370 0.202 1290
10 6370 0.247 1570 5730 0.219 1260
11 5790 0.257 1490 5210 0.228 1190
12 5310 0.276 1470 4780 0.246 1170
13 4900 0.296 1450 4410 0.263 1160
14 4550 0.316 1440 4090 0.281 1150
15 4250 0.336 1430 3820 0.298 1140
16 3980 0.355 1410 3580 0.316 1130
17 3750 0.365 1370 3370 0.325 1090
18 3540 0.375 1330 3180 0.333 1060
19 3350 0.385 1290 3020 0.342 1030
20 3180 0.395 1260 2870 0.351 1010
TYPHOON - high performance solid carbide drills
116
TYPHOON
PU-HPU
INFO
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
SUH
CUTTING PARAMETERS
355SUH
Ø RUN OUT
<0.02mm
Material Group
ISO 513 S1 S2 S3 S4 S5
Hardness/Rm < 35 HRC 35-45 HRC
Vc (m/min) 25-45 15-35 40-60 30-50
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
33720 0.045 170 2650 0.032 80 5310 0.043 230 4250 0.036 150
42790 0.053 150 1990 0.037 70 3980 0.051 200 3180 0.043 140
52230 0.062 140 1590 0.043 70 3180 0.059 190 2550 0.049 130
61860 0.070 130 1330 0.049 70 2650 0.066 180 2120 0.056 120
71590 0.078 120 1140 0.055 60 2270 0.074 170 1820 0.063 110
81390 0.086 120 1000 0.060 60 1990 0.082 160 1590 0.069 110
91240 0.095 120 880 0.066 60 1770 0.090 160 1420 0.076 110
10 1110 0.103 110 800 0.072 60 1590 0.098 160 1270 0.082 100
11 1010 0.107 110 720 0.075 50 1450 0.102 150 1160 0.086 100
12 930 0.115 110 660 0.081 50 1330 0.109 150 1060 0.092 100
13 860 0.123 110 610 0.086 50 1220 0.117 140 980 0.099 100
14 800 0.132 110 570 0.092 50 1140 0.125 140 910 0.105 100
15 740 0.140 100 530 0.098 50 1060 0.133 140 850 0.112 100
16 700 0.148 100 500 0.104 50 1000 0.141 140 800 0.118 90
17 660 0.152 100 470 0.106 50 940 0.145 140 750 0.122 90
18 620 0.156 100 440 0.109 50 880 0.148 130 710 0.125 90
19 590 0.160 90 420 0.112 50 840 0.152 130 670 0.128 90
20 560 0.164 90 400 0.115 50 800 0.156 130 640 0.132 80
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
ALH
Drills specifically designed for non-ferrous materials (ISO N).
Punte progettate appositamente per la foratura di materiali
non ferrosi (ISO N).
Eigens für das Bohren von nicht eisenhaltigen Materialien
(ISO N) entwickelte Bohrer.
Forets conçus spécialement pour le perçage de matériaux
non ferreux (ISO N).
Puntas proyectadas específicamente para el taladro de
materiales no ferrosos (ISO N).
Свёрла, разработанные специально для сверления
отверстий в цветных металлах (ISO N).
TYPHOON ALH
HIGH PERFORMANCE - NON-FERROUS MATERIALS
118
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
ALH
TYPHOON ALH HIGH PERFORMANCE - NON-FERROUS MATERIALS
- Self-centering geometry: highly accurate
holes
- Straight cutting edge and highly positive
geometry: low cutting forces to prevent
welding
- Chip pocket: wide and curved to improve
the chip ejection
- Back taper geometry: improves the cutting
efficiency
- Chip pocket finishing: highly polished to
reduce welding and improve chip ejection
- Modified oil holes: improves coolant feed
- Substrate: specifically selected for high
wear resistance, long and reliable life
- Affûtage autocentré pour l’exécution de
trous précis
- Profil de l’arête droit avec affûtage
spécifique pour réduire l’effort de coupe
- Géométrie des goujoures : arquées
et larges pour faciliter l’évacuation des
copeaux
- Géométrie du corps avec conicité arrière
pour faciliter l’action de coupe
- Finition des goujoures : polie pour
réduire le problème du collage et faciliter
l’évacuation des copeaux
- Trous de lubrification avec géométrie
modifiée pour un apport de lubrifiant plus
important
- Substrat spécifique pour garantir durée et
fiabilité
- Affilatura autocentrante per l’esecuzione di
fori precisi
- Profilo del tagliente diritto con affilatura
specifica per ridurre lo sforzo di taglio
- Geometria delle gole: arcuate e ampie per
agevolare l’evacuazione dei trucioli
- Geometria del corpo con conicità
posteriore per agevolare l’azione di taglio
- Finitura gole: lappate per ridurre il
problema dell’incollaggio e facilitare
l’evacuazione dei trucioli
- Fori di refrigerazione con geometria
modificata per un maggior apporto di
refrigerante
- Substrato specifico per garantire durata e
affidabilità
- Afilado autocentrante para la ejecución de
agujeros precisos
- Perfil del borde recto con afilado
específico para reducir el esfuerzo de corte
- Geometría de las ranuras: arqueadas y
amplias para facilitar la evacuación de las
virutas
- Geometría del cuerpo con conicidad
posterior para facilitar la acción de corte
- Acabado ranuras: lapeadas para reducir
el problema del encolado y facilitar la
evacuación de las virutas
- Agujeros de refrigeración con geometría
modificada para una mayor aportación de
refrigerante
- Sustrato específico para garantizar
duración y fiabilidad
- Selbstzentrierender Schliff für die
Herstellung von präzisen Bohrungen
- Gerades Schneidkantenprofil mit
Spezialschliff zur Reduzierung des
Schneiddrucks
- Geometrie der Nuten: gebogen und breit
zur Vereinfachung der Späneabführung
- Geometrie des Körpers mit konischem
hinteren Bereich zur Erleichterung des
Schnittvorgangs
- Schlichtbearbeitung der Nuten: geläppt,
um Probleme durch Verkleben zu reduzieren
und um die Späneabführung zu erleichtern
- Kühlöffnungen mit abgeänderter
Geometrie für einen verbesserten
Kühlmittelzufluss
- Spezielles Trägermaterial zur
Gewährleistung von Lebensdauer und
Zuverlässigkeit
- Самоцентрирующаяся геометрия:
высокая точность отверстий
- Прямые режущие кромки и большой
передний угол: низкие силы резания
- Стружечные канавки: широкие с
большим наклоном для надежной
эвакуации стружки
- Геометрия с обратным конусом:
увеличивает эффективность обработки
- Отполированные стружечные канавки:
уменьшают вероятность приваривания
стружки и облегчают ее вывод
- Большие отверстия: увеличена
эффективность подвода СОЖ
- Специальное покрытие для повышения
стойкости инструмента
TYPHOON - high performance solid carbide drills
119
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
ALH
h stock standard f non-standard stock m stock exhaustion
D(m7) D Tol. d(h6) l l1 L EDP No. Stock
3.00 +0.012/+0.002 6 14 20 62 353ALH0300 h
3.10 +0.016/+0.004 6 14 20 62 353ALH0310 h
3.20 +0.016/+0.004 6 14 20 62 353ALH0320 h
3.30 +0.016/+0.004 6 14 20 62 353ALH0330 h
3.40 +0.016/+0.004 6 14 20 62 353ALH0340 h
3.50 +0.016/+0.004 6 14 20 62 353ALH0350 h
3.60 +0.016/+0.004 6 14 20 62 353ALH0360 h
3.70 +0.016/+0.004 6 14 20 62 353ALH0370 h
3.80 +0.016/+0.004 6 17 24 66 353ALH0380 h
3.90 +0.016/+0.004 6 17 24 66 353ALH0390 h
4.00 +0.016/+0.004 6 17 24 66 353ALH0400 h
4.10 +0.016/+0.004 6 17 24 66 353ALH0410 h
4.20 +0.016/+0.004 6 17 24 66 353ALH0420 h
4.30 +0.016/+0.004 6 17 24 66 353ALH0430 h
4.40 +0.016/+0.004 6 17 24 66 353ALH0440 f
4.50 +0.016/+0.004 6 17 24 66 353ALH0450 h
4.60 +0.016/+0.004 6 17 24 66 353ALH0460 h
4.70 +0.016/+0.004 6 17 24 66 353ALH0470 h
4.80 +0.016/+0.004 6 20 28 66 353ALH0480 h
4.90 +0.016/+0.004 6 20 28 66 353ALH0490 f
5.00 +0.016/+0.004 6 20 28 66 353ALH0500 h
5.10 +0.016/+0.004 6 20 28 66 353ALH0510 h
5.20 +0.016/+0.004 6 20 28 66 353ALH0520 h
5.30 +0.016/+0.004 6 20 28 66 353ALH0530 h
5.40 +0.016/+0.004 6 20 28 66 353ALH0540 f
5.50 +0.016/+0.004 6 20 28 66 353ALH0550 h
5.60 +0.016/+0.004 6 20 28 66 353ALH0560 h
5.70 +0.016/+0.004 6 20 28 66 353ALH0570 h
5.80 +0.016/+0.004 6 20 28 66 353ALH0580 h
5.90 +0.016/+0.004 6 20 28 66 353ALH0590 f
6.00 +0.016/+0.004 6 20 28 66 353ALH0600 h
6.10 +0.021/+0.006 8 24 34 79 353ALH0610 h
6.20 +0.021/+0.006 8 24 34 79 353ALH0620 h
6.30 +0.021/+0.006 8 24 34 79 353ALH0630 h
6.40 +0.021/+0.006 8 24 34 79 353ALH0640 f
6.50 +0.021/+0.006 8 24 34 79 353ALH0650 h
6.60 +0.021/+0.006 8 24 34 79 353ALH0660 f
6.70 +0.021/+0.006 8 24 34 79 353ALH0670 h
6.80 +0.021/+0.006 8 24 34 79 353ALH0680 h
353ALH
aluminium, polished flutes, ALH (through coolant)
3XD DIN
6537K POLISHED
PMKNSH
+
+ 1st choice , suitable
TYPHOON - high performance solid carbide drills
120
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
ALH
353ALH
aluminium, polished flutes, ALH (through coolant)
3XD DIN
6537K POLISHED
PMKNSH
+
+ 1st choice , suitable
h stock standard f non-standard stock m stock exhaustion
D(m7) D Tol. d(h6) l l1 L EDP No. Stock
6.90 +0.021/+0.006 8 24 34 79 353ALH0690 f
7.00 +0.021/+0.006 8 24 34 79 353ALH0700 h
7.10 +0.021/+0.006 8 29 41 79 353ALH0710 f
7.20 +0.021/+0.006 8 29 41 79 353ALH0720 h
7.30 +0.021/+0.006 8 29 41 79 353ALH0730 f
7.40 +0.021/+0.006 8 29 41 79 353ALH0740 f
7.50 +0.021/+0.006 8 29 41 79 353ALH0750 h
7.60 +0.021/+0.006 8 29 41 79 353ALH0760 f
7.70 +0.021/+0.006 8 29 41 79 353ALH0770 f
7.80 +0.021/+0.006 8 29 41 79 353ALH0780 h
7.90 +0.021/+0.006 8 29 41 79 353ALH0790 f
8.00 +0.021/+0.006 8 29 41 79 353ALH0800 h
8.10 +0.021/+0.006 10 35 47 89 353ALH0810 f
8.20 +0.021/+0.006 10 35 47 89 353ALH0820 h
8.30 +0.021/+0.006 10 35 47 89 353ALH0830 h
8.40 +0.021/+0.006 10 35 47 89 353ALH0840 f
8.50 +0.021/+0.006 10 35 47 89 353ALH0850 h
8.60 +0.021/+0.006 10 35 47 89 353ALH0860 h
8.70 +0.021/+0.006 10 35 47 89 353ALH0870 f
8.80 +0.021/+0.006 10 35 47 89 353ALH0880 h
8.90 +0.021/+0.006 10 35 47 89 353ALH0890 f
9.00 +0.021/+0.006 10 35 47 89 353ALH0900 h
9.10 +0.021/+0.006 10 35 47 89 353ALH0910 f
9.20 +0.021/+0.006 10 35 47 89 353ALH0920 f
9.30 +0.021/+0.006 10 35 47 89 353ALH0930 f
9.40 +0.021/+0.006 10 35 47 89 353ALH0940 f
9.50 +0.021/+0.006 10 35 47 89 353ALH0950 h
9.60 +0.021/+0.006 10 35 47 89 353ALH0960 f
9.70 +0.021/+0.006 10 35 47 89 353ALH0970 f
9.80 +0.021/+0.006 10 35 47 89 353ALH0980 f
9.90 +0.021/+0.006 10 35 47 89 353ALH0990 f
10.00 +0.021/+0.006 10 35 47 89 353ALH1000 h
10.20 +0.025/+0.007 12 40 55 102 353ALH1020 h
10.30 +0.025/+0.007 12 40 55 102 353ALH1030 h
10.50 +0.025/+0.007 12 40 55 102 353ALH1050 h
10.80 +0.025/+0.007 12 40 55 102 353ALH1080 f
11.00 +0.025/+0.007 12 40 55 102 353ALH1100 h
11.20 +0.025/+0.007 12 40 55 102 353ALH1120 f
11.30 +0.025/+0.007 12 40 55 102 353ALH1130 f
TYPHOON - high performance solid carbide drills
121
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
ALH
h stock standard f non-standard stock m stock exhaustion
D(m7) D Tol. d(h6) l l1 L EDP No. Stock
11.50 +0.025/+0.007 12 40 55 102 353ALH1150 h
11.80 +0.025/+0.007 12 40 55 102 353ALH1180 f
12.00 +0.025/+0.007 12 40 55 102 353ALH1200 h
12.20 +0.025/+0.007 14 43 60 107 353ALH1220 f
12.50 +0.025/+0.007 14 43 60 107 353ALH1250 f
12.80 +0.025/+0.007 14 43 60 107 353ALH1280 f
13.00 +0.025/+0.007 14 43 60 107 353ALH1300 f
13.50 +0.025/+0.007 14 43 60 107 353ALH1350 f
14.00 +0.025/+0.007 14 43 60 107 353ALH1400 f
14.50 +0.025/+0.007 16 45 65 115 353ALH1450 f
15.00 +0.025/+0.007 16 65 65 115 353ALH1500 f
15.50 +0.025/+0.007 16 65 65 115 353ALH1550 f
16.00 +0.025/+0.007 16 65 65 115 353ALH1600 f
16.50 +0.025/+0.007 18 73 73 123 353ALH1650 f
17.00 +0.025/+0.007 18 73 73 123 353ALH1700 f
17.50 +0.025/+0.007 18 73 73 123 353ALH1750 f
18.00 +0.025/+0.007 18 73 73 123 353ALH1800 f
18.50 +0.029/+0.008 20 79 79 131 353ALH1850 f
19.00 +0.029/+0.008 20 79 79 131 353ALH1900 f
19.50 +0.029/+0.008 20 79 79 131 353ALH1950 f
20.00 +0.029/+0.008 20 79 79 131 353ALH2000 f
353ALH
aluminium, polished flutes, ALH (through coolant)
3XD DIN
6537K POLISHED
PMKNSH
+
+ 1st choice , suitable
TYPHOON - high performance solid carbide drills
122
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
ALH
CUTTING PARAMETERS
353ALH
Ø RUN OUT
<0.02mm
Material Group
ISO 513 N1 N2 N3 N4 N5
Hardness/Rm
Vc (m/min) 260-300 230-270 200-240 280-320
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
329720 0.160 4760 26540 0.152 4030 23350 0.136 3180 31850 0.176 5610
422290 0.190 4240 19900 0.181 3590 17520 0.162 2830 23890 0.209 4990
517830 0.220 3920 15920 0.209 3330 14010 0.187 2620 19110 0.242 4620
614860 0.250 3720 13270 0.238 3150 11680 0.213 2480 15920 0.275 4380
712740 0.280 3570 11370 0.266 3020 10010 0.238 2380 13650 0.308 4200
811150 0.310 3460 9950 0.295 2930 8760 0.264 2310 11940 0.341 4070
99910 0.340 3370 8850 0.323 2860 7780 0.289 2250 10620 0.374 3970
10 8920 0.370 3300 7960 0.352 2800 7010 0.315 2200 9550 0.407 3890
11 8110 0.400 3240 7240 0.380 2750 6370 0.340 2170 8690 0.440 3820
12 7430 0.430 3190 6630 0.409 2710 5840 0.366 2130 7960 0.473 3770
13 6860 0.460 3160 6120 0.437 2670 5390 0.391 2110 7350 0.506 3720
14 6370 0.490 3120 5690 0.466 2650 5000 0.417 2080 6820 0.539 3680
15 5940 0.520 3090 5310 0.494 2620 4670 0.442 2060 6370 0.572 3640
16 5570 0.550 3060 4980 0.523 2600 4380 0.468 2050 5970 0.605 3610
17 5250 0.580 3050 4680 0.551 2580 4120 0.493 2030 5620 0.638 3590
18 4950 0.610 3020 4420 0.580 2560 3890 0.519 2020 5310 0.671 3560
19 4690 0.640 3000 4190 0.608 2550 3690 0.544 2010 5030 0.704 3540
20 4460 0.670 2990 3980 0.637 2530 3500 0.570 1990 4780 0.737 3520
TYPHOON - high performance solid carbide drills
123
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
ALH
h stock standard f non-standard stock m stock exhaustion
D(m7) D Tol. d(h6) l l1 L EDP No. Stock
3.00 +0.012/+0.002 6 23 28 66 355ALH0300 h
3.10 +0.016/+0.004 6 23 28 66 355ALH0310 f
3.20 +0.016/+0.004 6 23 28 66 355ALH0320 h
3.30 +0.016/+0.004 6 23 28 66 355ALH0330 h
3.40 +0.016/+0.004 6 23 28 66 355ALH0340 h
3.50 +0.016/+0.004 6 23 28 66 355ALH0350 h
3.60 +0.016/+0.004 6 23 28 66 355ALH0360 h
3.70 +0.016/+0.004 6 23 28 66 355ALH0370 h
3.80 +0.016/+0.004 6 29 36 74 355ALH0380 h
3.90 +0.016/+0.004 6 29 36 74 355ALH0390 f
4.00 +0.016/+0.004 6 29 36 74 355ALH0400 h
4.10 +0.016/+0.004 6 29 36 74 355ALH0410 f
4.20 +0.016/+0.004 6 29 36 74 355ALH0420 h
4.30 +0.016/+0.004 6 29 36 74 355ALH0430 h
4.40 +0.016/+0.004 6 29 36 74 355ALH0440 f
4.50 +0.016/+0.004 6 29 36 74 355ALH0450 h
4.60 +0.016/+0.004 6 29 36 74 355ALH0460 f
4.70 +0.016/+0.004 6 29 36 74 355ALH0470 f
4.80 +0.016/+0.004 6 35 44 82 355ALH0480 h
4.90 +0.016/+0.004 6 35 44 82 355ALH0490 f
5.00 +0.016/+0.004 6 35 44 82 355ALH0500 h
5.10 +0.016/+0.004 6 35 44 82 355ALH0510 h
5.20 +0.016/+0.004 6 35 44 82 355ALH0520 h
5.30 +0.016/+0.004 6 35 44 82 355ALH0530 f
5.40 +0.016/+0.004 6 35 44 82 355ALH0540 f
5.50 +0.016/+0.004 6 35 44 82 355ALH0550 h
5.60 +0.016/+0.004 6 35 44 82 355ALH0560 h
5.70 +0.016/+0.004 6 35 44 82 355ALH0570 f
5.80 +0.016/+0.004 6 35 44 82 355ALH0580 h
5.90 +0.016/+0.004 6 35 44 82 355ALH0590 f
6.00 +0.016/+0.004 6 35 44 82 355ALH0600 h
6.10 +0.021/+0.006 8 43 53 91 355ALH0610 f
6.20 +0.021/+0.006 8 43 53 91 355ALH0620 h
6.30 +0.021/+0.006 8 43 53 91 355ALH0630 f
6.40 +0.021/+0.006 8 43 53 91 355ALH0640 f
6.50 +0.021/+0.006 8 43 53 91 355ALH0650 h
6.60 +0.021/+0.006 8 43 53 91 355ALH0660 f
6.70 +0.021/+0.006 8 43 53 91 355ALH0670 h
6.80 +0.021/+0.006 8 43 53 91 355ALH0680 h
355ALH
aluminium, polished flutes, ALH (through coolant)
5XD DIN
6537L POLISHED
PMKNSH
+
+ 1st choice , suitable
TYPHOON - high performance solid carbide drills
124
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
ALH
355ALH
aluminium, polished flutes, ALH (through coolant)
5XD DIN
6537L POLISHED
PMKNSH
+
+ 1st choice , suitable
h stock standard f non-standard stock m stock exhaustion
D(m7) D Tol. d(h6) l l1 L EDP No. Stock
6.90 +0.021/+0.006 8 43 53 91 355ALH0690 h
7.00 +0.021/+0.006 8 43 53 91 355ALH0700 h
7.10 +0.021/+0.006 8 43 53 91 355ALH0710 f
7.20 +0.021/+0.006 8 43 53 91 355ALH0720 h
7.30 +0.021/+0.006 8 43 53 91 355ALH0730 f
7.40 +0.021/+0.006 8 43 53 91 355ALH0740 f
7.50 +0.021/+0.006 8 43 53 91 355ALH0750 h
7.60 +0.021/+0.006 8 43 53 91 355ALH0760 f
7.70 +0.021/+0.006 8 43 53 91 355ALH0770 f
7.80 +0.021/+0.006 8 43 53 91 355ALH0780 h
7.90 +0.021/+0.006 8 43 53 91 355ALH0790 f
8.00 +0.021/+0.006 8 43 53 91 355ALH0800 h
8.10 +0.021/+0.006 10 49 61 103 355ALH0810 f
8.20 +0.021/+0.006 10 49 61 103 355ALH0820 h
8.30 +0.021/+0.006 10 49 61 103 355ALH0830 f
8.40 +0.021/+0.006 10 49 61 103 355ALH0840 f
8.50 +0.021/+0.006 10 49 61 103 355ALH0850 h
8.60 +0.021/+0.006 10 49 61 103 355ALH0860 f
8.70 +0.021/+0.006 10 49 61 103 355ALH0870 f
8.80 +0.021/+0.006 10 49 61 103 355ALH0880 h
8.90 +0.021/+0.006 10 49 61 103 355ALH0890 f
9.00 +0.021/+0.006 10 49 61 103 355ALH0900 h
9.10 +0.021/+0.006 10 49 61 103 355ALH0910 f
9.20 +0.021/+0.006 10 49 61 103 355ALH0920 f
9.30 +0.021/+0.006 10 49 61 103 355ALH0930 f
9.40 +0.021/+0.006 10 49 61 103 355ALH0940 f
9.50 +0.021/+0.006 10 61 61 103 355ALH0950 h
9.60 +0.021/+0.006 10 61 61 103 355ALH0960 f
9.70 +0.021/+0.006 10 61 61 103 355ALH0970 f
9.80 +0.021/+0.006 10 61 61 103 355ALH0980 f
9.90 +0.021/+0.006 10 61 61 103 355ALH0990 f
10.00 +0.021/+0.006 10 61 61 103 355ALH1000 h
10.20 +0.025/+0.007 12 71 71 118 355ALH1020 h
10.50 +0.025/+0.007 12 71 71 118 355ALH1050 h
10.80 +0.025/+0.007 12 71 71 118 355ALH1080 f
11.00 +0.025/+0.007 12 71 71 118 355ALH1100 h
11.20 +0.025/+0.007 12 71 71 118 355ALH1120 f
11.30 +0.025/+0.007 12 71 71 118 355ALH1130 f
11.50 +0.025/+0.007 12 71 71 118 355ALH1150 h
TYPHOON - high performance solid carbide drills
125
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
ALH
h stock standard f non-standard stock m stock exhaustion
D(m7) D Tol. d(h6) l l1 L EDP No. Stock
11.80 +0.025/+0.007 12 71 71 118 355ALH1180 f
12.00 +0.025/+0.007 12 71 71 118 355ALH1200 h
12.50 +0.025/+0.007 14 77 77 124 355ALH1250 f
13.00 +0.025/+0.007 14 77 77 124 355ALH1300 f
13.50 +0.025/+0.007 14 77 77 124 355ALH1350 f
14.00 +0.025/+0.007 14 77 77 124 355ALH1400 f
14.50 +0.025/+0.007 16 83 83 133 355ALH1450 f
15.00 +0.025/+0.007 16 83 83 133 355ALH1500 f
15.50 +0.025/+0.007 16 83 83 133 355ALH1550 f
16.00 +0.025/+0.007 16 83 83 133 355ALH1600 f
16.50 +0.025/+0.007 18 93 93 143 355ALH1650 f
17.00 +0.025/+0.007 18 93 93 143 355ALH1700 f
17.50 +0.025/+0.007 18 93 93 143 355ALH1750 f
18.00 +0.025/+0.007 18 93 93 143 355ALH1800 f
18.50 +0.029/+0.008 20 101 101 153 355ALH1850 f
19.00 +0.029/+0.008 20 101 101 153 355ALH1900 f
19.50 +0.029/+0.008 20 101 101 153 355ALH1950 f
20.00 +0.029/+0.008 20 101 101 153 355ALH2000 f
355ALH
aluminium, polished flutes, ALH (through coolant)
5XD DIN
6537L POLISHED
PMKNSH
+
+ 1st choice , suitable
TYPHOON - high performance solid carbide drills
126
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
HRC
TYPHOON
SUH MINI
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
ALH
CUTTING PARAMETERS
355ALH
Ø RUN OUT
<0.02mm
Material Group
ISO 513 N1 N2 N3 N4 N5
Hardness/Rm
Vc (m/min) 240-280 200-240 180-220 260-300
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
327600 0.136 3750 23350 0.129 3020 21230 0.116 2450 29720 0.150 4450
420700 0.162 3340 17520 0.153 2690 15920 0.137 2190 22290 0.178 3960
516560 0.187 3100 14010 0.178 2490 12740 0.159 2030 17830 0.206 3670
613800 0.213 2930 11680 0.202 2360 10620 0.181 1920 14860 0.234 3470
711830 0.238 2820 10010 0.226 2260 9100 0.202 1840 12740 0.262 3340
810350 0.264 2730 8760 0.250 2190 7960 0.224 1780 11150 0.290 3230
99200 0.289 2660 7780 0.275 2140 7080 0.246 1740 9910 0.318 3150
10 8280 0.315 2600 7010 0.299 2090 6370 0.267 1700 8920 0.346 3090
11 7530 0.340 2560 6370 0.323 2060 5790 0.289 1670 8110 0.374 3030
12 6900 0.366 2520 5840 0.347 2030 5310 0.311 1650 7430 0.402 2990
13 6370 0.391 2490 5390 0.371 2000 4900 0.332 1630 6860 0.430 2950
14 5910 0.417 2460 5000 0.396 1980 4550 0.354 1610 6370 0.458 2920
15 5520 0.442 2440 4670 0.420 1960 4250 0.376 1600 5940 0.486 2890
16 5180 0.468 2420 4380 0.444 1950 3980 0.397 1580 5570 0.514 2860
17 4870 0.493 2400 4120 0.468 1930 3750 0.419 1570 5250 0.542 2850
18 4600 0.519 2390 3890 0.493 1920 3540 0.441 1560 4950 0.570 2820
19 4360 0.544 2370 3690 0.517 1910 3350 0.462 1550 4690 0.598 2810
20 4140 0.570 2360 3500 0.541 1890 3180 0.484 1540 4460 0.626 2790
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
MINI SUH
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HRC
TYPHOON HRC
HIGH PERFORMANCE - HARDENED STEEL 45÷62 HRC
Reliable high precision drills for hardened steel 45÷62 HRC.
Punte ad alta precisione per la foratura di acciai temprati
45÷62 HRC.
Hohe Präzision und zuverlässige Bohrungen für gehärteten
Stahl 45÷62 HRC.
Forets haute précision et fiables pour acier trempé
45÷62HRC.
Brocas de alta precisión para aceros templados 45÷62 HRC.
Высокоточные и высокопроизводительные сверла для
обработки сталей с твердостью 45÷62 HRC.
128
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
MINI SUH
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HRC
TYPHOON HRC HIGH PERFORMANCE - HARDENED STEEL 45÷62 HRC
- Drills for hardened steel 45÷62 HRC
- Self-centering geometry: high accurate
holes
- Straight and reinforced edge: high stability
and chipping resistance
- 45° chamfer: edge corners protection
- Thicker web: high rigidity and stability
- 15° helix angle: low helix for higher rigidity
- Substrate and coating: specifically selected
for high wear resistance, long and reliable
life
- Forets pour aciers trempés 45÷62 HRC
- Affûtage autocentré pour l’exécution de
trous précis
- Profil de l’arête droit et renforcé
- Géométrie des angles : protection avec
biseau à 45°
- Cœur très épais pour garantir rigidité et
stabilité
- Angle de l’hélice à 15° : angle peu
accentué pour une solidité maximale
- Substrat et revêtement spécifiques pour
garantir durée et fiabilité
- Punte per acciai temprati 45÷62 HRC
- Affilatura autocentrante per l’esecuzione di
fori precisi
- Profilo del tagliente diritto e rinforzato
- Geometria degli spigoli: protezione con
smusso a 45°
- Nocciolo molto spesso per garantire
rigidità e stabilità
- Angolo dell’elica a 15°: angolo poco
accentuato per massima robustezza
- Substrato e rivestimento specifici per
garantire durata e affidabilità
- Brocas para aceros templados 45÷62 HRC
- Geometría autocentrante para la
realización de agujeros precisos
- Perfil del filo recto y reforzado
- Geometría de las bordes: protección con
redondeo a 45º
- Núcleo muy grueso para garantizar
rigidez y estabilidad
- Ángulo de la hélice a 15º: ángulo poco
acentuado para la máxima resistencia
- Sustrato y revestimiento específicos para
garantizar duración y fiabilidad
- Bohrer für gehärteten Stahl 45-62 HRC
- Selbstzentrierender Schliff für die
Herstellung von präzisen Bohrungen
- Gerades und verstärktes
Schneidkantenprofil
- Geometrie der Kanten: Schutzfase mit 45°
- Sehr starker Kern zur Gewährleistung von
Steifigkeit und Stabilität
- Anstellwinkel 15°: geringer Winkel für
maximale Robustheit
- Spezielles Trägermaterial und spezielle
Beschichtung zur Gewährleistung von
Standzeit und Zuverlässigkeit
- Свёрла для закалённой стали 45÷62
HRC
- Самоцентрирующаяся геометрия:
высокая точность отверстий
- Прямые усиленные кромки: высокая
стабильность резания и предотвращение
пакетирования
- Фаска 45°: защита кромок
- Утолщенная сердцевина: высокая
жесткость и стабильность
- Угол наклона винтовой канавки 15°:
маленький угол для высокой жесткости
- Специальное покрытие для повышения
стойкости инструмента
TYPHOON - high performance solid carbide drills
129
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
MINI SUH
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HRC
h stock standard f non-standard stock m stock exhaustion
D(h7) D Tol. d(h6) l l1 L EDP No. Stock
2.60 0/-0.010 6 14 20 62 353HRC0260 h
3.00 0/-0.010 6 14 20 62 353HRC0300 h
3.30 0/-0.012 6 14 20 62 353HRC0330 h
3.40 0/-0.012 6 14 20 62 353HRC0340 h
3.50 0/-0.012 6 14 20 62 353HRC0350 h
3.70 0/-0.012 6 14 20 62 353HRC0370 h
3.80 0/-0.012 6 17 24 66 353HRC0380 h
4.00 0/-0.012 6 17 24 66 353HRC0400 h
4.10 0/-0.012 6 17 24 66 353HRC0410 h
4.20 0/-0.012 6 17 24 66 353HRC0420 h
4.30 0/-0.012 6 17 24 66 353HRC0430 h
4.50 0/-0.012 6 17 24 66 353HRC0450 h
4.60 0/-0.012 6 17 24 66 353HRC0460 h
4.80 0/-0.012 6 20 28 66 353HRC0480 h
5.00 0/-0.012 6 20 28 66 353HRC0500 h
5.10 0/-0.012 6 20 28 66 353HRC0510 h
5.20 0/-0.012 6 20 28 66 353HRC0520 h
5.30 0/-0.012 6 20 28 66 353HRC0530 h
5.50 0/-0.012 6 20 28 66 353HRC0550 h
5.60 0/-0.012 6 20 28 66 353HRC0560 h
5.80 0/-0.012 6 20 28 66 353HRC0580 h
6.00 0/-0.012 6 20 28 66 353HRC0600 h
6.10 0/-0.015 8 29 41 79 353HRC0610 h
6.20 0/-0.015 8 29 41 79 353HRC0620 h
6.50 0/-0.015 8 29 41 79 353HRC0650 h
6.80 0/-0.015 8 29 41 79 353HRC0680 h
6.90 0/-0.015 8 29 41 79 353HRC0690 h
7.00 0/-0.015 8 29 41 79 353HRC0700 h
7.40 0/-0.015 8 29 41 79 353HRC0740 h
7.50 0/-0.015 8 29 41 79 353HRC0750 h
7.80 0/-0.015 8 29 41 79 353HRC0780 h
8.00 0/-0.015 8 29 41 79 353HRC0800 h
8.10 0/-0.015 10 35 47 89 353HRC0810 h
8.20 0/-0.015 10 35 47 89 353HRC0820 h
8.50 0/-0.015 10 35 47 89 353HRC0850 h
8.60 0/-0.015 10 35 47 89 353HRC0860 h
8.70 0/-0.015 10 35 47 89 353HRC0870 h
8.80 0/-0.015 10 35 47 89 353HRC0880 h
9.00 0/-0.015 10 35 47 89 353HRC0900 h
353HRC
hardened steel 45÷62 HRC
3XD DIN
6537K
150°+C45°
PMKNSH
+
+ 1st choice , suitable
C45°
TYPHOON - high performance solid carbide drills
130
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
MINI SUH
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HRC
h stock standard f non-standard stock m stock exhaustion
D(h7) D Tol. d(h6) l l1 L EDP No. Stock
9.30 0/-0.015 10 35 47 89 353HRC0930 h
9.50 0/-0.015 10 35 47 89 353HRC0950 h
9.80 0/-0.015 10 35 47 89 353HRC0980 h
10.00 0/-0.015 10 35 47 89 353HRC1000 h
10.20 0/-0.018 12 40 55 102 353HRC1020 h
10.30 0/-0.018 12 40 55 102 353HRC1030 h
10.40 0/-0.018 12 40 55 102 353HRC1040 h
10.50 0/-0.018 12 40 55 102 353HRC1050 h
10.80 0/-0.018 12 40 55 102 353HRC1080 h
11.00 0/-0.018 12 40 55 102 353HRC1100 h
11.20 0/-0.018 12 40 55 102 353HRC1120 h
11.50 0/-0.018 12 40 55 102 353HRC1150 h
11.80 0/-0.018 12 40 55 102 353HRC1180 h
12.00 0/-0.018 12 40 55 102 353HRC1200 h
12.20 0/-0.018 14 43 60 107 353HRC1220 h
12.50 0/-0.018 14 43 60 107 353HRC1250 h
12.80 0/-0.018 14 43 60 107 353HRC1280 h
13.00 0/-0.018 14 43 60 107 353HRC1300 h
14.20 0/-0.018 16 45 65 115 353HRC1420 h
353HRC
hardened steel 45÷62 HRC
3XD DIN
6537K
150°+C45°
PMKNSH
+
+ 1st choice , suitable
C45°
TYPHOON - high performance solid carbide drills
131
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
MINI SUH
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HRC
CUTTING PARAMETERS
353HRC
Ø RUN OUT
<0.02mm
Material Group
ISO 513 H1 H4 H2 H3 H5
Hardness/Rm 50-56 HRC 54-62 HRC < 62 HRC 48-55 HRC
Vc (m/min) 15-25 12-18 8-12 20-30
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
32120 0.020 40 1590 0.017 30 1060 0.013 10 2650 0.020 50
41590 0.030 50 1190 0.026 30 800 0.020 20 1990 0.030 60
51270 0.040 50 960 0.034 30 640 0.026 20 1590 0.040 60
61060 0.050 50 800 0.043 30 530 0.033 20 1330 0.050 70
7910 0.060 50 680 0.051 30 450 0.039 20 1140 0.060 70
8800 0.070 60 600 0.060 40 400 0.046 20 1000 0.070 70
9710 0.080 60 530 0.068 40 350 0.052 20 880 0.080 70
10 640 0.090 60 480 0.077 40 320 0.059 20 800 0.090 70
11 580 0.100 60 430 0.085 40 290 0.065 20 720 0.100 70
12 530 0.110 60 400 0.094 40 270 0.072 20 660 0.110 70
13 490 0.120 60 370 0.102 40 240 0.078 20 610 0.120 70
14.2 450 0.130 60 340 0.111 40 230 0.085 20 570 0.130 70
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
SUH MINI
TYPHOON SUH MINI
HIGH PERFORMANCE - MINIATURE SHORT, LONG AND
EXTRA LONG
Miniature drills, from short (5xD) to extra-long (30xD) type,
suitable for ISO P, M, K, N, S materials.
Mini punte corte (5xD), lunghe ed extra-lunghe (30xD),
adatte alla foratura di materiali ISO P, M, K, N, S.
Kurze (5xD), lange und extra-lange (30xD) Kleinstbohrer für
das Bohren der Materialien ISO P, M, K, N, S.
Mini forets courts (5xD), longs et extra-longs (30xD),
appropriés au perçage de matériaux ISO P, M, K, N, S.
Mini brocas cortas (5xD), largas y extra largas (30xD),
adecuadas para el taladro de materiales ISO P, M, K, N, S.
Мини-свёрла от коротких (5xD) до супердлинных (30xD).
Пригодны для обработки отверстий в материалах по
ISO P, M, K, N, S.
134
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
SUH MINI
TYPHOON SUH MINI HIGH PERFORMANCE - MINIATURE SHORT AND LONG
- Miniature drills are manufactured with
unified 3 mm shank
- Oil holes for internal coolant feed
- Self-centering geometry: highly accurate
holes
- Straight and reinforced edge: high stability
and chipping resistance
- Edge geometry: special design for edge
and corners protection
- Chip pocket: highly polished to prevent
welding and to improve the chip ejection
- Substrate and coating: specifically selected
for high wear resistance, long and reliable
life
- Available from Ø1 mm to Ø3 mm
- Different cutting length types from short
(5xD) to extra-long (30xD)
- Mini forets fabriqués avec une tige unifiée
ayant un diamètre de 3 mm
- Trous de lubrification
- Affûtage autocentré pour l’exécution de
trous précis et peu d’efforts de coupe
- Profil de l’arête droit et renforcé : il génère
des copeaux courts et garantit une grande
fiabilité
- Géométrie de l’arête avec affûtage
spécifique pour protéger l’arête et les
angles
- Finition des goujoures : polie pour
réduire le problème du collage et faciliter
l’évacuation des copeaux
- Substrat et revêtement : spécifiques pour
garantir durée et fiabilité
- Disponibles du Ø1 mm au Ø3mm
- Différents types de longueur, de la plus
courte (5xD) aux extra-longues (30xD)
- Mini-punte costruite con gambo unificato
Ø3 mm
- Fori di refrigerazione
- Affilatura autocentrante per l’esecuzione di
fori precisi e bassi sforzi di taglio
- Profilo del tagliente diritto e rinforzato:
genera trucioli corti e garantisce grande
affidabilità
- Geometria del tagliente con affilatura
specifica a protezione del tagliente e degli
spigoli
- Finitura gole: lappate per ridurre il
problema dell’incollaggio e facilitare
l’evacuazione dei trucioli
- Substrato e rivestimento: specifici per
garantire durata e affidabilità
- Disponibili da Ø1 mm a Ø3 mm
- Differenti tipi di lunghezza, dalle corte
(5XD) alle extra-lunghe (30XD)
- Mini-brocas fabricadas con mango
unificado con diámetro de 3 mm
- Agujeros de refrigeración
- Afilado autocentrante para la realización
de agujeros precisos y bajos esfuerzos de
corte
- Perfil del filo recto y reforzado: genera
virutas cortas y garantiza una gran fiabilidad
- Geometría del filo con afilado específico
para proteger el filo y los ángulos
- Acabado ranuras: lapeadas para reducir
el problema del encolado y facilitar la
evacuación de las virutas
- Sustrato y revestimiento: específicos para
garantizar duración y fiabilidad
- Disponibles de Ø1 mm a Ø3mm
- Diferentes tipos de longitud, desde las
cortas (5XD) hasta las extra-largas (30XD)
- Kleinstbohrer mit genormtem Schaft und
einem Durchmesser von 3 mm
- Kühlöffnungen
- Selbstzentrierender Schliff für präzise
Bohrungen und geringen Schneiddruck
- Gerades und verstärktes Schneidkantenprofil:
zur Erzeugung kurzer Späne und zur
Gewährleistung hoher Zuverlässigkeit
- Geometrie der Schneidkante mit speziellem
Schliff zum Schutz von Schneidkante und
Kanten
- Schlichtbearbeitung der Nuten: geläppt, um
Probleme durch Verkleben zu reduzieren und
um die Späneabführung zu erleichtern
- Trägermaterial und Beschichtung: speziell
zur Gewährleistung von Standzeit und
Zuverlässigkeit
- Erhältlich von Ø1 mm bis Ø3 mm
- Verschiedene Längen, von kurz (5XD) bis
extra-lang (30XD)
- Мини-свёрла с унифицированным 3х мм
хвостовиком
- Отверстия для подвода СОЖ
- Самоцентрирующаяся геометрия:
высокая точность отверстий
- Прямые усиленные кромки: высокая
стабильность резания и предотвращение
пакетирования
- Геометрия режущей кромки со
специальной заточкой для защиты лезвия
и кромок
- Отполированные стружечные канавки:
уменьшают вероятность приваривания
стружки и облегчают ее вывод
- Специальное покрытие для повышения
стойкости инструмента
- Доступны диаметром от Ø1 мм до Ø3 мм
- Различные длины: от коротких (5XD) до
супердлинных (30XD)
135
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
SUH MINI
TYPHOON SUH MINI HIGH PERFORMANCE - MINIATURE SHORT AND LONG
MACHINING OF DEEP HOLES
PERPENDICULAR TO THE SURFACE
ESECUZIONE FORI PROFONDI
ORTOGONALI ALLA SUPERFICIE
HERSTELLUNG TIEFER RECHTWINKLIGER
BOHRUNGEN
EXÉCUTION DE TROUS PROFONDS
ORTHOGONAUX À LA SURFACE
MECANIZADO DE AGUJEROS PROFUNDOS
PERPENDICULARES A LA SUPERFÍCIE
СВЕРЛЕНИЕ ГЛУБОКИХ ОТВЕРСТИЙ ПЕРПЕНДИКУЛЯРНО
ОБРАБАТЫВАЕМОЙ ПОВЕХНОСТИ
STEP 1
As pilot drill (1xD,1.5xD), please use 343TA
with head angle 140° (SUH MINI=135°) and
m7 tolerance (SUH MINI=h7)
Utiliser un foret 343TA avec un angle en
bout de 140° (SUH MINI=135°) et une
tolérance m7 (SUH MINI=h7), pour effectuer
un trou pilote (1xD -1.5xD) très précis.
Utilizzare una punta 343TA con angolo in
testa di 140° (SUH MINI=135°) e tolleranza
m7 (SUH MINI=h7), per eseguire un foro
pilota (1xD -1.5xD) molto preciso
Utilice una broca 343TA con ángulo de
punta de 140° (SUH MINI=135°) y tolerancia
m7 (SUH MINI=h7), para realizar un agujero
piloto (1xD -1,5xD) muy preciso
Einen Bohrer 343TA mit einem
Spitzenwinkel von 140° (SUH MINI=135°)
und Toleranz m7 (SUH MINI=h7) für
die Herstellung einer äußerst präzisen
Richtbohrung (1xD - 1.5xD) verwenden.
Для пилотного отверстия (1xD -1.5xD)
используйте сверло 343TA с углом
при вершине 140° (SUH MINI=135°) и
допуском на диаметр m7 (SUH MINI=h7).
STEP 2
With coolant feed OFF, enter the pilot hole
with SUH MINI drill at Vc=20m/min and
fn=0.3mm/rev. Position the SUH MINI drill
at 1mm from the end of the pilot hole, then
start supplying the coolant and start drilling.
Sans actionner la lubrification interne,
entrer avec le foret long série SUH MINI
àl’intérieur du trou. Vc=20m/min,
fn=0.3mm/rév. Placer le foret SUH MINI
jusqu’à 1mm du fond du trou pilote.
Actionner la lubrification interne à haute
pression et commencer le perçage.
Senza azionare il refrigerante interno,
entrare con la punta lunga serie SUH
MINI all’interno del foro. Vc=20m/min,
fn=0.3mm/rev. Posizionare la punta SUH
MINI sino a 1mm dal fondo del foro pilota.
Azionare il refrigerante interno ad alta
pressione e cominciare la foratura.
Sin accionar el refrigerante interno,
entre con la broca larga de la serie SUH
MINI dentro del agujero. Vc=20m/min,
fn=0.3mm/rev. Posicione la broca SUH
MINI hasta 1 mm. del fondo del agujero
piloto. Accione el refrigerante interno a alta
presión y comience el taladro.
Ohne Aktivierung der internen Kühlung,
einen langen Bohrer der Serie SUH MINI
in die Bohrung einführen. Vc=20 m/min,
fn=0,3 mm/U. Den Bohrer SUH MINI bis 1
mm vom Ende der Richtbohrung ansetzen.
Die interne Kühlung mit Hochdruck
aktivieren und mit der Bohrung beginnen.
Без подачи СОЖ, введите длинное
сверло серии SUH MINI внутрь пилотного
отверстия с режимами Vc=20 м/мин и
fn=0,3 мм/об. Спозиционируйте сверло
SUH MINI на расстоянии 1 мм от дна
отверстия. Включите подачу СОЖ и
начните сверление.
1D÷1.5D
1.0mm
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
SUH MINI
136
TYPHOON SUH MINI HIGH PERFORMANCE - MINIATURE SHORT AND LONG
STEP 3
Make continue drilling operation without
steps for chip ejection.
In case of through holes, reduce the feed by
30% before the hole exit (approx. 1mm).
Stop the coolant feed.
Percer sans step pour l'évacuation des
copeaux.
En présence de trous débouchants, 1
mm avant d’avoir terminé le trou, réduire
l’avance de 30 %.
Arrêter la lubrification.
Forare senza step per scarico trucioli.
Nel caso di fori passanti, 1 mm prima di aver
completato il foro, ridurre l’avanzamento
del 30%.
Fermare il refrigerante.
Taladre sin step para la descarga de virutas.
En el caso de agujeros pasantes, 1 mm
antes de haber completado el agujero,
reduzca el avance un 30%.
Pare el refrigerante.
Für die Späneabführung Stufenlos bohren.
Bei Durchgangsbohrungen 1 mm vor
Fertigstellung der Bohrung den Vorschub
um 30% reduzieren.
Die Kühlung deaktivieren.
Сверлите без остановок и выводов
инструмента.
В случае обработки сквозного отверстия,
снизьте подачу на 30%, за 1 мм до
выхода.
Отключите подачу СОЖ.
STEP 4
Withdraw the drill using max rpm and
double fn, until 2xD from the hole entrance.
Retirer le foret en utilisant le maximum
de tours disponibles et le double de
l’avancement conseillé jusqu’à une
profondeur 2xD.
Ritirare la punta utilizzando il massimo dei
giri disponibili e il doppio dell’avanzamento
consigliato sino ad una profondità 2xD.
Retire la broca utilizando el máximo de
rpm disponibles y el doble del avance
aconsejado hasta una profundidad 2xD.
Den Bohrer zurückziehen, dabei die
maximal verfügbare Drehzahl und den
doppelten Wert des empfohlenen
Vorschubs bis zu einer Tiefe 2xD einsetzen.
Выньте сверло до уровня 2хD, используя
максимальную частоту вращения и
двойную подачу.
STEP 5
Completing the exit from the hole by using
slow and constant speed.
Terminer la dernière partie du perçage avec
une vitesse réduite et constante.
Completare l’ultimo tratto di arretramento
con velocità ridotta e costante.
Complete el último tramo de retroceso con
velocidad reducida y constante.
Den letzten Abschnitt beim Zurückziehen
mit reduzierter und konstanter
Geschwindigkeit fertigstellen.
Полностью выньте сверло на заниженных
режимах.
2D÷2.5D
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
SUH MINI
137
TYPHOON SUH MINI HIGH PERFORMANCE - MINIATURE SHORT AND LONG
MACHINING OF DEEP HOLES ON
SLANTED OR IRREGULAR SURFACES
ESECUZIONE FORI PROFONDI SU
SUPERFICI IRREGOLARI O OBLIQUE
HERSTELLUNG TIEFER BOHRUNGEN AUF
SCHRÄGEN ODER UNREGELMÄSSIGEN
OBERFLÄCHEN
EXÉCUTION DE TROUS PROFONDS SUR DES
SURFACES IRRÉGULIÈRES OU OBLIQUES
MECANIZADO DE AGUJEROS PROFUNDOS
SOBRE SUPERFÍCIES IRREGULARES U
OBLICUAS
ОБРАБОТКА ГЛУБОКИХ ОТВЕРСТИЙ
НА НАКЛОННЫХ ИЛИ НЕРОВНЫХ
ПЛОСКОСТЯХ
STEP 1
Prepare a flat surface of the same size as the
drilling diameter.
Réaliser une surface plane en utilisant
une fraise avec une arête frontale. Le plan
réalisé doit avoir les mêmes dimensions que
le diamètre de perçage profond.
Realizzare una superficie piana utilizzando
una fresa con tagliente frontale. Il piano
realizzato deve avere le stesse dimensioni
del diametro di foratura profonda.
Realizar una superficie plana usando una
fresa con filo frontal. El plano realizado tiene
que tener las mismas dimensiones que el
diámetro de taladro profundo.
Eine ebene Oberfläche, durch einen Fräser
mit stirnseitiger Schneidkante, herstellen.
Die hergestellte Oberfläche muss dieselben
Abmessungen des Durchmessers der tiefen
Bohrung aufweisen.
Подготовьте ровную поверхность
с помощью концевой фрезы. Эта
поверхность должна быть того же
размера, что и диаметр будущего
глубокого отверстия.
STEP 2
As pilot drill (1xD,1.5xD), please use 343TA
with head angle 140° (SUH MINI=135°) and
m7 tolerance (SUH MINI=h7).
Utiliser un foret 343TA avec un angle en
bout de 140° (SUH MINI=135°) et une
tolérance m7 (SUH MINI=h7), pour effectuer
un trou pilote (1xD -1.5xD) très précis.
Utilizzare una punta 343TA con angolo in
testa di 140° (SUH MINI=135°) e tolleranza
m7 (SUH MINI=h7), per eseguire un foro
pilota (1xD -1.5xD) molto preciso.
Utilice una broca 343TA con ángulo punta
de 140° (SUH MINI=135°) y tolerancia m7
(SUH MINI=h7), para realizar un agujero
piloto (1xD -1,5xD) muy preciso.
Einen Bohrer 343TA mit einem
Spitzenwinkel von 140° (SUH MINI=135°)
und Toleranz m7 (SUH MINI=h7) für
die Herstellung einer äußerst präzisen
Richtbohrung (1xD - 1.5xD) verwenden.
Для пилотного отверстия (1xD -1.5xD)
используйте сверло 343TA с углом
при вершине 140° (SUH MINI=135°) и
допуском на диаметр m7 (SUH MINI=h7).
1D÷1.5D
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
SUH MINI
138
TYPHOON SUH MINI HIGH PERFORMANCE - MINIATURE SHORT AND LONG
STEP 3
With coolant feed OFF, enter the pilot hole
with SUH MINI drill at Vc=20m/min and
fn=0.3mm/rev. Position the SUH MINI drill
at 1mm from the end of the pilot hole, then
start supplying the coolant and start drilling.
Sans actionner la lubrification interne,
entrer avec le foret long série SUH MINI
àl’intérieur du trou. Vc=20m/min,
fn=0.3mm/rév. Placer le foret SUH MINI
jusqu’à 1mm du fond du trou pilote.
Actionner la lubrification interne à haute
pression et commencer le perçage.
Senza azionare il refrigerante interno,
entrare con la punta lunga serie SUH
MINI all’interno del foro. Vc=20m/min,
fn=0.3mm/rev. Posizionare la punta SUH
MINI sino a 1mm dal fondo del foro pilota.
Azionare il refrigerante interno ad alta
pressione e cominciare la foratura.
Sin accionar el refrigerante interno,
entre con la broca larga de la serie SUH
MINI dentro del agujero. Vc=20m/min,
fn=0.3mm/rev. Posicione la broca SUH
MINI hasta 1 mm. del fondo del agujero
piloto. Accione el refrigerante interno a alta
presión y comience el taladro.
Ohne Aktivierung der internen Kühlung,
einen langen Bohrer der Serie SUH MINI
in die Bohrung einführen. Vc=20 m/min,
fn=0,3 mm/U. Den Bohrer SUH MINI bis 1
mm vom Ende der Richtbohrung ansetzen.
Die interne Kühlung mit Hochdruck
aktivieren und mit der Bohrung beginnen.
Без включения СОЖ, введите длинное
сверло серии SUH MINI внутрь пилотного
отверстия с режимами Vc=20 м/мин и
fn=0.3 мм/об. Спозиционируйте сверло
SUH MINI на расстоянии 1 мм от дна
отверстия. Включите подачу СОЖ и
начните сверление.
STEP 4
Make continue drilling operation without
steps for chip ejection.
In case of through holes, reduce the feed by
30% before the hole exit (approx. 1mm).
Stop the coolant feed.
Percer sans step pour l'évacuation des
copeaux.
En présence de trous débouchants, 1
mm avant d’avoir terminé le trou, réduire
l’avance de 30 %.
Arrêter la lubrification.
Forare senza step per scarico trucioli.
Nel caso di fori passanti, 1mm prima di aver
completato il foro, ridurre l’avanzamento
del 30%.
Fermare il refrigerante.
Taladre sin step para la descarga de virutas.
En el caso de agujeros pasantes, 1 mm
antes de haber completado el agujero,
reduzca el avance un 30%.
Pare el refrigerante.
Für die Späneabführung Stufenlos bohren.
Bei Durchgangsbohrungen 1 mm vor
Fertigstellung der Bohrung den Vorschub
um 30% reduzieren.
Die Kühlung deaktivieren.
Сверлите без остановок и выводов
инструмента.
В случае обработки сквозного отверстия,
снизьте подачу на 30%, за 1 мм до
выхода.
Отключите подачу СОЖ.
1.0mm
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
SUH MINI
139
TYPHOON SUH MINI HIGH PERFORMANCE - MINIATURE SHORT AND LONG
STEP 5
Withdraw the drill using max rpm and
double fn, until 2xD÷2.5xD from the hole
entrance.
Retirer le foret en utilisant le maximum
de tours disponibles et le double de
l’avancement conseillé jusqu’à une
profondeur 2xD÷2.5xD.
Ritirare la punta utilizzando il massimo dei
giri disponibili e il doppio dell’avanzamento
consigliato sino ad una profondità
2xD÷2.5xD.
Retire la broca utilizando el máximo de
rpm disponibles y el doble del avance
aconsejado hasta una profundidad de
2xD÷2.5xD.
Den Bohrer zurückziehen, dabei die
maximal verfügbare Drehzahl und den
doppelten Wert des empfohlenen
Vorschubs bis zu einer Tiefe 2xD÷2.5xD
einsetzen.
Выньте сверло до уровня 2хD, используя
максимальную частоту вращения и
двойную подачу.
STEP 6
Completing the exit from the hole by using
slow and constant speed.
Terminer la dernière partie du perçage avec
une vitesse réduite et constante.
Completare l’ultimo tratto di arretramento
con velocità ridotta e costante.
Complete el último tramo de retroceso con
velocidad reducida y constante.
Den letzten Abschnitt beim Zurückziehen
mit reduzierter und konstanter
Geschwindigkeit fertigstellen.
Полностью выньте сверло на заниженных
режимах.
2D÷2.5D
TYPHOON - high performance solid carbide drills
140
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
SUH MINI
h stock standard f non-standard stock m stock exhaustion
D(h7) D Tol. d(h6) l l1 L drilling length EDP No. Stock
1.00 0/-0.010 3 6.5 8 50 5 x D 355SUH0100 h
1.10 0/-0.010 3 7.2 8.7 50 5 x D 355SUH0110 h
1.20 0/-0.010 3 7.8 9.3 50 5 x D 355SUH0120 h
1.30 0/-0.010 3 8.5 10 50 5 x D 355SUH0130 h
1.40 0/-0.010 3 9.1 10.6 50 5 x D 355SUH0140 h
1.50 0/-0.010 3 9.8 11.3 50 5 x D 355SUH0150 h
1.60 0/-0.010 3 10.4 11.9 50 5 x D 355SUH0160 h
1.70 0/-0.010 3 11.1 12.6 55 5 x D 355SUH0170 h
1.80 0/-0.010 3 11.7 13.2 55 5 x D 355SUH0180 h
1.90 0/-0.010 3 12.4 13.9 55 5 x D 355SUH0190 h
2.00 0/-0.010 3 13 16 55 5 x D 355SUH0200 h
2.10 0/-0.010 3 13.7 16.9 55 5 x D 355SUH0210 h
2.20 0/-0.010 3 14.3 17.6 55 5 x D 355SUH0220 h
2.30 0/-0.010 3 15 18.5 55 5 x D 355SUH0230 h
2.40 0/-0.010 3 15.6 19.2 55 5 x D 355SUH0240 h
2.50 0/-0.010 3 16.3 20.1 55 5 x D 355SUH0250 h
2.60 0/-0.010 3 16.9 20.8 55 5 x D 355SUH0260 h
2.70 0/-0.010 3 17.6 21.7 55 5 x D 355SUH0270 h
2.80 0/-0.010 3 18.2 22.4 55 5 x D 355SUH0280 h
2.90 0/-0.010 3 18.9 23.3 55 5 x D 355SUH0290 h
3.00 0/-0.010 3 19.5 24 55 5 x D 355SUH030003 h
355SUH MINI
3 mm shank, short (5xD), polished flutes, SUH (through coolant)
5XD OSAWA
NORM 135°
PMKNSH
+++,,
+ 1st choice , suitable
TYPHOON - high performance solid carbide drills
141
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
SUH MINI
CUTTING PARAMETERS
355SUH MINI
Ø RUN OUT
<0.02mm
Material Group
ISO 513 P1 P2 P3 P4 P5 P6
Hardness/Rm 500-700 N/mm² 600-1000 N/mm² 900-1200 N/mm² 1200-1400 N/mm²
Vc (m/min) 50-70* 40-60* 30-50* 20-40*
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
1.0 19110 0.0108 210 15920 0.0097 150 12740 0.0086 110 9550 0.0076 72
1.1 17370 0.0120 210 14480 0.0108 160 11580 0.0096 110 8690 0.0084 73
1.2 15920 0.0132 210 13270 0.0119 160 10620 0.0106 110 7960 0.0092 74
1.3 14700 0.0144 210 12250 0.0130 160 9800 0.0115 110 7350 0.0101 74
1.4 13650 0.0156 210 11370 0.0140 160 9100 0.0125 110 6820 0.0109 74
1.5 12740 0.0180 230 10620 0.0162 170 8490 0.0144 120 6370 0.0126 80
1.6 11940 0.0204 240 9950 0.0184 180 7960 0.0163 130 5970 0.0143 85
1.7 11240 0.0228 260 9370 0.0205 190 7490 0.0182 140 5620 0.0160 90
1.8 10620 0.0252 270 8850 0.0227 200 7080 0.0202 140 5310 0.0176 94
1.9 10060 0.0276 280 8380 0.0248 210 6700 0.0221 150 5030 0.0193 97
2.0 9550 0.0300 290 7960 0.0270 210 6370 0.0240 150 4780 0.0210 100
2.1 9100 0.0324 290 7580 0.0292 220 6070 0.0259 160 4550 0.0227 103
2.2 8690 0.0348 300 7240 0.0313 230 5790 0.0278 160 4340 0.0244 106
2.3 8310 0.0372 310 6920 0.0335 230 5540 0.0298 160 4150 0.0260 108
2.4 7960 0.0396 320 6630 0.0356 240 5310 0.0317 170 3980 0.0277 110
2.5 7640 0.0420 320 6370 0.0378 240 5100 0.0336 170 3820 0.0294 112
2.6 7350 0.0444 330 6120 0.0400 240 4900 0.0355 170 3670 0.0311 114
2.7 7080 0.0468 330 5900 0.0421 250 4720 0.0374 180 3540 0.0328 116
2.8 6820 0.0492 340 5690 0.0443 250 4550 0.0394 180 3410 0.0344 117
2.9 6590 0.0516 340 5490 0.0464 250 4390 0.0413 180 3290 0.0361 119
3.0 6370 0.0540 340 5310 0.0486 260 4250 0.0432 180 3180 0.0378 120
*if the machine tool or the equipment wouldn’t allow to reach the requested rpm, please use the max. available rpm recalculating the Vf value
(Vf=n available x fn)
Ø RUN OUT
<0.02mm
Material Group
ISO 513 M1 M2 M3 M4 M5
Hardness/Rm < 750 N/mm² 550-850 N/mm² 650-950 N/mm² 850-1200 N/mm²
Vc (m/min) 20-40* 20-30* 20-30* 15-25*
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
1.0 9550 0.0081 80 7960 0.0069 55 7960 0.0057 45 6370 0.0049 31
1.1 8690 0.0090 80 7240 0.0077 55 7240 0.0063 46 5790 0.0054 31
1.2 7960 0.0099 80 6630 0.0084 56 6630 0.0069 46 5310 0.0059 32
1.3 7350 0.0108 80 6120 0.0092 56 6120 0.0076 46 4900 0.0065 32
1.4 6820 0.0117 80 5690 0.0099 57 5690 0.0082 47 4550 0.0070 32
1.5 6370 0.0135 90 5310 0.0115 60 5310 0.0095 50 4250 0.0081 34
1.6 5970 0.0153 90 4980 0.0130 60 4980 0.0107 53 3980 0.0092 37
1.7 5620 0.0171 100 4680 0.0145 70 4680 0.0120 56 3750 0.0103 38
1.8 5310 0.0189 100 4420 0.0161 70 4420 0.0132 58 3540 0.0113 40
1.9 5030 0.0207 100 4190 0.0176 70 4190 0.0145 60 3350 0.0124 42
2.0 4780 0.0225 110 3980 0.0191 80 3980 0.0158 60 3180 0.0135 43
2.1 4550 0.0243 110 3790 0.0207 80 3790 0.0170 60 3030 0.0146 44
2.2 4340 0.0261 110 3620 0.0222 80 3620 0.0183 70 2900 0.0157 45
2.3 4150 0.0279 120 3460 0.0237 80 3460 0.0195 70 2770 0.0167 46
2.4 3980 0.0297 120 3320 0.0252 80 3320 0.0208 70 2650 0.0178 47
2.5 3820 0.0315 120 3180 0.0268 90 3180 0.0221 70 2550 0.0189 48
2.6 3670 0.0333 120 3060 0.0283 90 3060 0.0233 70 2450 0.0200 49
2.7 3540 0.0351 120 2950 0.0298 90 2950 0.0246 70 2360 0.0211 50
2.8 3410 0.0369 130 2840 0.0314 90 2840 0.0258 70 2270 0.0221 50
2.9 3290 0.0387 130 2750 0.0329 90 2750 0.0271 70 2200 0.0232 51
3.0 3180 0.0405 130 2650 0.0344 90 2650 0.0284 80 2120 0.0243 52
*if the machine tool or the equipment wouldn’t allow to reach the requested rpm, please use the max. available rpm recalculating the Vf value
(Vf=n available x fn)
TYPHOON - high performance solid carbide drills
142
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
SUH MINI
CUTTING PARAMETERS
355SUH MINI
Ø RUN OUT
<0.02mm
Material Group
ISO 513 K1 K2 K3 K4
Hardness/Rm 150-250 HB 150-350 HB 120-260 HB 250-500 HB
Vc (m/min) 50-70* 40-60* 30-50* 20-40*
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
1.0 19110 0.0108 210 15920 0.0097 150 12740 0.0086 110 9550 0.0076 70
1.1 17370 0.0120 210 14480 0.0108 160 11580 0.0096 110 8690 0.0084 70
1.2 15920 0.0132 210 13270 0.0119 160 10620 0.0106 110 7960 0.0092 70
1.3 14700 0.0144 210 12250 0.0130 160 9800 0.0115 110 7350 0.0101 70
1.4 13650 0.0156 210 11370 0.0140 160 9100 0.0125 110 6820 0.0109 70
1.5 12740 0.0180 230 10620 0.0162 170 8490 0.0144 120 6370 0.0126 80
1.6 11940 0.0204 240 9950 0.0184 180 7960 0.0163 130 5970 0.0143 90
1.7 11240 0.0228 260 9370 0.0205 190 7490 0.0182 140 5620 0.0160 90
1.8 10620 0.0252 270 8850 0.0227 200 7080 0.0202 140 5310 0.0176 90
1.9 10060 0.0276 280 8380 0.0248 210 6700 0.0221 150 5030 0.0193 100
2.0 9550 0.0300 290 7960 0.0270 210 6370 0.0240 150 4780 0.0210 100
2.1 9100 0.0324 290 7580 0.0292 220 6070 0.0259 160 4550 0.0227 100
2.2 8690 0.0348 300 7240 0.0313 230 5790 0.0278 160 4340 0.0244 110
2.3 8310 0.0372 310 6920 0.0335 230 5540 0.0298 160 4150 0.0260 110
2.4 7960 0.0396 320 6630 0.0356 240 5310 0.0317 170 3980 0.0277 110
2.5 7640 0.0420 320 6370 0.0378 240 5100 0.0336 170 3820 0.0294 110
2.6 7350 0.0444 330 6120 0.0400 240 4900 0.0355 170 3670 0.0311 110
2.7 7080 0.0468 330 5900 0.0421 250 4720 0.0374 180 3540 0.0328 120
2.8 6820 0.0492 340 5690 0.0443 250 4550 0.0394 180 3410 0.0344 120
2.9 6590 0.0516 340 5490 0.0464 250 4390 0.0413 180 3290 0.0361 120
3.0 6370 0.0540 340 5310 0.0486 260 4250 0.0432 180 3180 0.0378 120
*if the machine tool or the equipment wouldn’t allow to reach the requested rpm, please use the max. available rpm recalculating the Vf value
(Vf=n available x fn)
Ø RUN OUT
<0.02mm
Material Group
ISO 513 N1 N2 N3 N4 N5
Hardness/Rm
Vc (m/min) 80-120* 80-120* 80-120* 100-140*
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
1.0 31850 0.0135 430 31850 0.0122 390 31850 0.0108 340 38220 0.0149 570
1.1 28950 0.0150 430 28950 0.0135 390 28950 0.0120 350 34740 0.0165 570
1.2 26540 0.0165 440 26540 0.0149 390 26540 0.0132 350 31850 0.0182 580
1.3 24500 0.0180 440 24500 0.0162 400 24500 0.0144 350 29400 0.0198 580
1.4 22750 0.0195 440 22750 0.0176 400 22750 0.0156 350 27300 0.0215 590
1.5 21230 0.0225 480 21230 0.0203 430 21230 0.0180 380 25480 0.0248 630
1.6 19900 0.0255 510 19900 0.0230 460 19900 0.0204 410 23890 0.0281 670
1.7 18730 0.0285 530 18730 0.0257 480 18730 0.0228 430 22480 0.0314 700
1.8 17690 0.0315 560 17690 0.0284 500 17690 0.0252 450 21230 0.0347 740
1.9 16760 0.0345 580 16760 0.0311 520 16760 0.0276 460 20110 0.0380 760
2.0 15920 0.0375 600 15920 0.0338 540 15920 0.0300 480 19110 0.0413 790
2.1 15170 0.0405 610 15170 0.0365 550 15170 0.0324 490 18200 0.0446 810
2.2 14480 0.0435 630 14480 0.0392 570 14480 0.0348 500 17370 0.0479 830
2.3 13850 0.0465 640 13850 0.0419 580 13850 0.0372 520 16620 0.0512 850
2.4 13270 0.0495 660 13270 0.0446 590 13270 0.0396 530 15920 0.0545 870
2.5 12740 0.0525 670 12740 0.0473 600 12740 0.0420 540 15290 0.0578 880
2.6 12250 0.0555 680 12250 0.0500 610 12250 0.0444 540 14700 0.0611 900
2.7 11800 0.0585 690 11800 0.0527 620 11800 0.0468 550 14150 0.0644 910
2.8 11370 0.0615 700 11370 0.0554 630 11370 0.0492 560 13650 0.0677 920
2.9 10980 0.0645 710 10980 0.0581 640 10980 0.0516 570 13180 0.0710 940
3.0 10620 0.0675 720 10620 0.0608 650 10620 0.0540 570 12740 0.0743 950
*if the machine tool or the equipment wouldn’t allow to reach the requested rpm, please use the max. available rpm recalculating the Vf value
(Vf=n available x fn)
TYPHOON - high performance solid carbide drills
143
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
SUH MINI
CUTTING PARAMETERS
355SUH MINI
Ø RUN OUT
<0.02mm
Material Group
ISO 513 S1 S2 S3 S4 S5
Hardness/Rm < 35 HRC 35-45 HRC
Vc (m/min) 20-40* 10-20* 30-50* 20-40*
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
1.0 9550 0.0076 70 4780 0.0053 25 12740 0.0072 90 9550 0.0060 58
1.1 8690 0.0084 70 4340 0.0059 26 11580 0.0080 90 8690 0.0067 58
1.2 7960 0.0092 70 3980 0.0065 26 10620 0.0088 90 7960 0.0074 59
1.3 7350 0.0101 70 3670 0.0071 26 9800 0.0096 90 7350 0.0081 59
1.4 6820 0.0109 70 3410 0.0076 26 9100 0.0104 90 6820 0.0087 60
1.5 6370 0.0126 80 3180 0.0088 28 8490 0.0120 100 6370 0.0101 60
1.6 5970 0.0143 90 2990 0.0100 30 7960 0.0136 110 5970 0.0114 70
1.7 5620 0.0160 90 2810 0.0112 31 7490 0.0152 110 5620 0.0128 70
1.8 5310 0.0176 90 2650 0.0123 33 7080 0.0168 120 5310 0.0141 70
1.9 5030 0.0193 100 2510 0.0135 34 6700 0.0184 120 5030 0.0155 80
2.0 4780 0.0210 100 2390 0.0147 35 6370 0.0200 130 4780 0.0168 80
2.1 4550 0.0227 100 2270 0.0159 36 6070 0.0215 130 4550 0.0181 80
2.2 4340 0.0244 110 2170 0.0171 37 5790 0.0231 130 4340 0.0195 80
2.3 4150 0.0260 110 2080 0.0182 38 5540 0.0247 140 4150 0.0208 90
2.4 3980 0.0277 110 1990 0.0194 39 5310 0.0263 140 3980 0.0222 90
2.5 3820 0.0294 110 1910 0.0206 39 5100 0.0279 140 3820 0.0235 90
2.6 3670 0.0311 110 1840 0.0218 40 4900 0.0295 140 3670 0.0249 90
2.7 3540 0.0328 120 1770 0.0229 41 4720 0.0311 150 3540 0.0262 90
2.8 3410 0.0344 120 1710 0.0241 41 4550 0.0327 150 3410 0.0276 90
2.9 3290 0.0361 120 1650 0.0253 42 4390 0.0343 150 3290 0.0289 100
3.0 3180 0.0378 120 1590 0.0265 42 4250 0.0359 150 3180 0.0302 100
*if the machine tool or the equipment wouldn’t allow to reach the requested rpm, please use the max. available rpm recalculating the Vf value
(Vf=n available x fn)
TYPHOON - high performance solid carbide drills
144
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
SUH MINI
h stock standard f non-standard stock m stock exhaustion
358SUH MINI
3 mm shank, short (8xD), polished flutes, SUH (through coolant)
8XD OSAWA
NORM 135°
PMKNSH
+++,,
+ 1st choice , suitable
D(h7) D Tol. d(h6) l l1 L drilling length EDP No. Stock
1.00 0/-0.010 3 9.5 11 50 8 x D 358SUH0100 h
1.10 0/-0.010 3 10.5 12 50 8 x D 358SUH0110 h
1.20 0/-0.010 3 11.4 12.9 50 8 x D 358SUH0120 h
1.30 0/-0.010 3 12.4 13.9 50 8 x D 358SUH0130 h
1.40 0/-0.010 3 13.3 14.8 50 8 x D 358SUH0140 h
1.50 0/-0.010 3 14.3 15.8 50 8 x D 358SUH0150 h
1.60 0/-0.010 3 15.2 16.7 50 8 x D 358SUH0160 h
1.70 0/-0.010 3 16.2 17.7 60 8 x D 358SUH0170 h
1.80 0/-0.010 3 17.1 18.6 60 8 x D 358SUH0180 h
1.90 0/-0.010 3 18.1 19.6 60 8 x D 358SUH0190 h
2.00 0/-0.010 3 19 22 60 8 x D 358SUH0200 h
2.10 0/-0.010 3 20 23.2 60 8 x D 358SUH0210 h
2.20 0/-0.010 3 20.9 24.2 60 8 x D 358SUH0220 h
2.30 0/-0.010 3 21.9 25.4 60 8 x D 358SUH0230 h
2.40 0/-0.010 3 22.8 26.4 60 8 x D 358SUH0240 h
2.50 0/-0.010 3 23.8 27.6 60 8 x D 358SUH0250 h
2.60 0/-0.010 3 24.7 28.6 60 8 x D 358SUH0260 h
2.70 0/-0.010 3 25.7 29.8 60 8 x D 358SUH0270 h
2.80 0/-0.010 3 26.6 30.8 60 8 x D 358SUH0280 h
2.90 0/-0.010 3 27.6 32 60 8 x D 358SUH0290 h
3.00 0/-0.010 3 28.5 33 60 8 x D 358SUH0300 h
TYPHOON - high performance solid carbide drills
145
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
SUH MINI
CUTTING PARAMETERS
358SUH MINI
Ø RUN OUT
<0.02mm
Material Group
ISO 513 P1 P2 P3 P4 P5 P6
Hardness/Rm 500-700 N/mm² 600-1000 N/mm² 900-1200 N/mm² 1200-1400 N/mm²
Vc (m/min) 50-70* 40-60* 30-50* 20-40*
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
1.0 19110 0.0090 170 15920 0.0081 130 12740 0.0072 90 9550 0.0063 60
1.1 17370 0.0100 170 14480 0.0090 130 11580 0.0080 93 8690 0.0070 61
1.2 15920 0.0110 180 13270 0.0099 131 10620 0.0088 93 7960 0.0077 61
1.3 14700 0.0120 180 12250 0.0108 132 9800 0.0096 94 7350 0.0084 62
1.4 13650 0.0130 180 11370 0.0117 133 9100 0.0104 95 6820 0.0091 62
1.5 12740 0.0150 190 10620 0.0135 143 8490 0.0120 102 6370 0.0105 67
1.6 11940 0.0170 200 9950 0.0153 152 7960 0.0136 108 5970 0.0119 71
1.7 11240 0.0190 210 9370 0.0171 160 7490 0.0152 114 5620 0.0133 75
1.8 10620 0.0210 220 8850 0.0189 167 7080 0.0168 119 5310 0.0147 78
1.9 10060 0.0230 230 8380 0.0207 173 6700 0.0184 123 5030 0.0161 81
2.0 9550 0.0250 240 7960 0.0225 179 6370 0.0200 127 4780 0.0175 84
2.1 9100 0.0270 250 7580 0.0243 184 6070 0.0216 131 4550 0.0189 86
2.2 8690 0.0290 250 7240 0.0261 189 5790 0.0232 134 4340 0.0203 88
2.3 8310 0.0310 260 6920 0.0279 193 5540 0.0248 137 4150 0.0217 90
2.4 7960 0.0330 260 6630 0.0297 197 5310 0.0264 140 3980 0.0231 92
2.5 7640 0.0350 270 6370 0.0315 201 5100 0.0280 143 3820 0.0245 94
2.6 7350 0.0370 270 6120 0.0333 204 4900 0.0296 145 3670 0.0259 95
2.7 7080 0.0390 280 5900 0.0351 207 4720 0.0312 147 3540 0.0273 97
2.8 6820 0.0410 280 5690 0.0369 210 4550 0.0328 149 3410 0.0287 98
2.9 6590 0.0430 280 5490 0.0387 212 4390 0.0344 151 3290 0.0301 99
3.0 6370 0.0450 290 5310 0.0405 215 4250 0.0360 153 3180 0.0315 100
*if the machine tool or the equipment wouldn’t allow to reach the requested rpm, please use the max. available rpm recalculating the Vf value
(Vf=n available x fn)
Ø RUN OUT
<0.02mm
Material Group
ISO 513 M1 M2 M3 M4 M5
Hardness/Rm < 750 N/mm² 550-850 N/mm² 650-950 N/mm² 850-1200 N/mm²
Vc (m/min) 20-40* 20-30* 20-30* 15-25*
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
1.0 9550 0.0068 60 7960 0.0057 46 7960 0.0047 38 6370 0.0041 26
1.1 8690 0.0075 70 7240 0.0064 46 7240 0.0053 38 5790 0.0045 26
1.2 7960 0.0083 70 6630 0.0070 46 6630 0.0058 38 5310 0.0050 26
1.3 7350 0.0090 70 6120 0.0077 47 6120 0.0063 39 4900 0.0054 26
1.4 6820 0.0098 70 5690 0.0083 47 5690 0.0068 39 4550 0.0059 27
1.5 6370 0.0113 70 5310 0.0096 51 5310 0.0079 42 4250 0.0068 29
1.6 5970 0.0128 80 4980 0.0108 54 4980 0.0089 44 3980 0.0077 30
1.7 5620 0.0143 80 4680 0.0121 57 4680 0.0100 47 3750 0.0086 32
1.8 5310 0.0158 80 4420 0.0134 59 4420 0.0110 49 3540 0.0095 33
1.9 5030 0.0173 90 4190 0.0147 60 4190 0.0121 51 3350 0.0104 35
2.0 4780 0.0188 90 3980 0.0159 60 3980 0.0131 52 3180 0.0113 36
2.1 4550 0.0203 90 3790 0.0172 70 3790 0.0142 54 3030 0.0122 37
2.2 4340 0.0218 90 3620 0.0185 70 3620 0.0152 55 2900 0.0131 38
2.3 4150 0.0233 100 3460 0.0198 70 3460 0.0163 56 2770 0.0140 39
2.4 3980 0.0248 100 3320 0.0210 70 3320 0.0173 58 2650 0.0149 39
2.5 3820 0.0263 100 3180 0.0223 70 3180 0.0184 58 2550 0.0158 40
2.6 3670 0.0278 100 3060 0.0236 70 3060 0.0194 59 2450 0.0167 41
2.7 3540 0.0293 100 2950 0.0249 70 2950 0.0205 60 2360 0.0176 41
2.8 3410 0.0308 100 2840 0.0261 70 2840 0.0215 60 2270 0.0185 42
2.9 3290 0.0323 110 2750 0.0274 80 2750 0.0226 60 2200 0.0194 43
3.0 3180 0.0338 110 2650 0.0287 80 2650 0.0236 60 2120 0.0203 43
*if the machine tool or the equipment wouldn’t allow to reach the requested rpm, please use the max. available rpm recalculating the Vf value
(Vf=n available x fn)
TYPHOON - high performance solid carbide drills
146
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
SUH MINI
CUTTING PARAMETERS
358SUH MINI
Ø RUN OUT
<0.02mm
Material Group
ISO 513 K1 K2 K3 K4
Hardness/Rm 150-250 HB 150-350 HB 120-260 HB 250-500 HB
Vc (m/min) 50-70* 40-60* 30-50* 20-40*
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
1.0 19110 0.0090 170 15920 0.0081 130 12740 0.0072 90 9550 0.0063 60
1.1 17370 0.0100 170 14480 0.0090 130 11580 0.0080 90 8690 0.0070 60
1.2 15920 0.0110 180 13270 0.0099 130 10620 0.0088 90 7960 0.0077 60
1.3 14700 0.0120 180 12250 0.0108 130 9800 0.0096 90 7350 0.0084 60
1.4 13650 0.0130 180 11370 0.0117 130 9100 0.0104 90 6820 0.0091 60
1.5 12740 0.0150 190 10620 0.0135 140 8490 0.0120 100 6370 0.0105 70
1.6 11940 0.0170 200 9950 0.0153 150 7960 0.0136 110 5970 0.0119 70
1.7 11240 0.0190 210 9370 0.0171 160 7490 0.0152 110 5620 0.0133 70
1.8 10620 0.0210 220 8850 0.0189 170 7080 0.0168 120 5310 0.0147 80
1.9 10060 0.0230 230 8380 0.0207 170 6700 0.0184 120 5030 0.0161 80
2.0 9550 0.0250 240 7960 0.0225 180 6370 0.0200 130 4780 0.0175 80
2.1 9100 0.0270 250 7580 0.0243 180 6070 0.0216 130 4550 0.0189 90
2.2 8690 0.0290 250 7240 0.0261 190 5790 0.0232 130 4340 0.0203 90
2.3 8310 0.0310 260 6920 0.0279 190 5540 0.0248 140 4150 0.0217 90
2.4 7960 0.0330 260 6630 0.0297 200 5310 0.0264 140 3980 0.0231 90
2.5 7640 0.0350 270 6370 0.0315 200 5100 0.0280 140 3820 0.0245 90
2.6 7350 0.0370 270 6120 0.0333 200 4900 0.0296 150 3670 0.0259 100
2.7 7080 0.0390 280 5900 0.0351 210 4720 0.0312 150 3540 0.0273 100
2.8 6820 0.0410 280 5690 0.0369 210 4550 0.0328 150 3410 0.0287 100
2.9 6590 0.0430 280 5490 0.0387 210 4390 0.0344 150 3290 0.0301 100
3.0 6370 0.0450 290 5310 0.0405 220 4250 0.0360 150 3180 0.0315 100
*if the machine tool or the equipment wouldn’t allow to reach the requested rpm, please use the max. available rpm recalculating the Vf value
(Vf=n available x fn)
Ø RUN OUT
<0.02mm
Material Group
ISO 513 N1 N2 N3 N4 N5
Hardness/Rm
Vc (m/min) 80-120* 80-120* 80-120* 100-140*
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
1.0 31850 0.0113 360 31850 0.0101 320 31850 0.0090 290 38220 0.0124 470
1.1 28950 0.0125 360 28950 0.0113 330 28950 0.0100 290 34740 0.0138 480
1.2 26540 0.0138 360 26540 0.0124 330 26540 0.0110 290 31850 0.0151 480
1.3 24500 0.0150 370 24500 0.0135 330 24500 0.0120 290 29400 0.0165 490
1.4 22750 0.0163 370 22750 0.0146 330 22750 0.0130 300 27300 0.0179 490
1.5 21230 0.0188 400 21230 0.0169 360 21230 0.0150 320 25480 0.0206 530
1.6 19900 0.0213 420 19900 0.0191 380 19900 0.0170 340 23890 0.0234 560
1.7 18730 0.0238 440 18730 0.0214 400 18730 0.0190 360 22480 0.0261 590
1.8 17690 0.0263 460 17690 0.0236 420 17690 0.0210 370 21230 0.0289 610
1.9 16760 0.0288 480 16760 0.0259 430 16760 0.0230 390 20110 0.0316 640
2.0 15920 0.0313 500 15920 0.0281 450 15920 0.0250 400 19110 0.0344 660
2.1 15170 0.0338 510 15170 0.0304 460 15170 0.0270 410 18200 0.0371 680
2.2 14480 0.0363 520 14480 0.0326 470 14480 0.0290 420 17370 0.0399 690
2.3 13850 0.0388 540 13850 0.0349 480 13850 0.0310 430 16620 0.0426 710
2.4 13270 0.0413 550 13270 0.0371 490 13270 0.0330 440 15920 0.0454 720
2.5 12740 0.0438 560 12740 0.0394 500 12740 0.0350 450 15290 0.0481 740
2.6 12250 0.0463 570 12250 0.0416 510 12250 0.0370 450 14700 0.0509 750
2.7 11800 0.0488 580 11800 0.0439 520 11800 0.0390 460 14150 0.0536 760
2.8 11370 0.0513 580 11370 0.0461 520 11370 0.0410 470 13650 0.0564 770
2.9 10980 0.0538 590 10980 0.0484 530 10980 0.0430 470 13180 0.0591 780
3.0 10620 0.0563 600 10620 0.0506 540 10620 0.0450 480 12740 0.0619 790
*if the machine tool or the equipment wouldn’t allow to reach the requested rpm, please use the max. available rpm recalculating the Vf value
(Vf=n available x fn)
TYPHOON - high performance solid carbide drills
147
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
SUH MINI
CUTTING PARAMETERS
358SUH MINI
Ø RUN OUT
<0.02mm
Material Group
ISO 513 S1 S2 S3 S4 S5
Hardness/Rm < 35 HRC 35-45 HRC
Vc (m/min) 20-40* 10-20* 30-50* 20-40*
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
1.0 9550 0.0063 60 4780 0.0044 21 12740 0.0060 80 9550 0.0050 48
1.1 8690 0.0070 60 4340 0.0049 21 11580 0.0067 80 8690 0.0056 49
1.2 7960 0.0077 60 3980 0.0054 21 10620 0.0073 80 7960 0.0062 49
1.3 7350 0.0084 60 3670 0.0059 22 9800 0.0080 80 7350 0.0067 49
1.4 6820 0.0091 60 3410 0.0064 22 9100 0.0086 80 6820 0.0073 50
1.5 6370 0.0105 70 3180 0.0074 23 8490 0.0100 80 6370 0.0084 54
1.6 5970 0.0119 70 2990 0.0083 25 7960 0.0113 90 5970 0.0095 57
1.7 5620 0.0133 70 2810 0.0093 26 7490 0.0126 90 5620 0.0106 60
1.8 5310 0.0147 80 2650 0.0103 27 7080 0.0140 100 5310 0.0118 60
1.9 5030 0.0161 80 2510 0.0113 28 6700 0.0153 100 5030 0.0129 60
2.0 4780 0.0175 80 2390 0.0123 29 6370 0.0166 110 4780 0.0140 70
2.1 4550 0.0189 90 2270 0.0132 30 6070 0.0180 110 4550 0.0151 70
2.2 4340 0.0203 90 2170 0.0142 31 5790 0.0193 110 4340 0.0162 70
2.3 4150 0.0217 90 2080 0.0152 32 5540 0.0206 110 4150 0.0174 70
2.4 3980 0.0231 90 1990 0.0162 32 5310 0.0219 120 3980 0.0185 70
2.5 3820 0.0245 90 1910 0.0172 33 5100 0.0233 120 3820 0.0196 70
2.6 3670 0.0259 100 1840 0.0181 33 4900 0.0246 120 3670 0.0207 80
2.7 3540 0.0273 100 1770 0.0191 34 4720 0.0259 120 3540 0.0218 80
2.8 3410 0.0287 100 1710 0.0201 34 4550 0.0273 120 3410 0.0230 80
2.9 3290 0.0301 100 1650 0.0211 35 4390 0.0286 130 3290 0.0241 80
3.0 3180 0.0315 100 1590 0.0221 35 4250 0.0299 130 3180 0.0252 80
*if the machine tool or the equipment wouldn’t allow to reach the requested rpm, please use the max. available rpm recalculating the Vf value
(Vf=n available x fn)
TYPHOON - high performance solid carbide drills
148
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
SUH MINI
h stock standard f non-standard stock m stock exhaustion
3512SUH MINI
3 mm shank, short (12xD), polished flutes, SUH (through coolant)
12XD OSAWA
NORM 135°
PMKNSH
+++,,
+ 1st choice , suitable
D(h7) D Tol. d(h6) l l1 L drilling length EDP No. Stock
1.00 0/-0.010 3 13.5 15 55 12 x D 3512SUH0100 h
1.10 0/-0.010 3 14.9 16.4 55 12 x D 3512SUH0110 h
1.20 0/-0.010 3 16.2 17.7 55 12 x D 3512SUH0120 h
1.30 0/-0.010 3 17.6 19.1 55 12 x D 3512SUH0130 h
1.40 0/-0.010 3 18.9 20.4 55 12 x D 3512SUH0140 h
1.50 0/-0.010 3 20.3 21.8 55 12 x D 3512SUH0150 h
1.60 0/-0.010 3 21.6 23.1 65 12 x D 3512SUH0160 h
1.70 0/-0.010 3 23 24.5 65 12 x D 3512SUH0170 h
1.80 0/-0.010 3 24.3 25.8 65 12 x D 3512SUH0180 h
1.90 0/-0.010 3 25.7 27.2 65 12 x D 3512SUH0190 h
2.00 0/-0.010 3 27 30 65 12 x D 3512SUH0200 h
2.10 0/-0.010 3 28.4 31.6 65 12 x D 3512SUH0210 h
2.20 0/-0.010 3 29.7 33 65 12 x D 3512SUH0220 h
2.30 0/-0.010 3 31.1 34.6 65 12 x D 3512SUH0230 h
2.40 0/-0.010 3 32.4 36 75 12 x D 3512SUH0240 h
2.50 0/-0.010 3 33.8 37.6 75 12 x D 3512SUH0250 h
2.60 0/-0.010 3 35.1 39 75 12 x D 3512SUH0260 h
2.70 0/-0.010 3 36.5 40.6 75 12 x D 3512SUH0270 h
2.80 0/-0.010 3 37.8 42 75 12 x D 3512SUH0280 h
2.90 0/-0.010 3 39.2 43.6 75 12 x D 3512SUH0290 h
3.00 0/-0.010 3 40.5 45 75 12 x D 3512SUH0300 h
TYPHOON - high performance solid carbide drills
149
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
SUH MINI
CUTTING PARAMETERS
3512SUH MINI
Ø RUN OUT
<0.02mm
Material Group
ISO 513 P1 P2 P3 P4 P5 P6
Hardness/Rm 500-700 N/mm² 600-1000 N/mm² 900-1200 N/mm² 1200-1400 N/mm²
Vc (m/min) 50-70* 40-60* 30-50* 20-40*
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
1.0 19110 0.0077 150 15920 0.0069 110 12740 0.0061 80 9550 0.0054 51
1.1 17370 0.0085 150 14480 0.0077 110 11580 0.0068 80 8690 0.0060 52
1.2 15920 0.0094 150 13270 0.0084 110 10620 0.0075 80 7960 0.0065 52
1.3 14700 0.0102 150 12250 0.0092 110 9800 0.0082 80 7350 0.0071 52
1.4 13650 0.0111 150 11370 0.0099 110 9100 0.0088 80 6820 0.0077 53
1.5 12740 0.0128 160 10620 0.0115 120 8490 0.0102 90 6370 0.0089 57
1.6 11940 0.0145 170 9950 0.0130 130 7960 0.0116 90 5970 0.0101 60
1.7 11240 0.0162 180 9370 0.0145 140 7490 0.0129 100 5620 0.0113 60
1.8 10620 0.0179 190 8850 0.0161 140 7080 0.0143 100 5310 0.0125 70
1.9 10060 0.0196 200 8380 0.0176 150 6700 0.0156 100 5030 0.0137 70
2.0 9550 0.0213 200 7960 0.0191 150 6370 0.0170 110 4780 0.0149 70
2.1 9100 0.0230 210 7580 0.0207 160 6070 0.0184 110 4550 0.0161 70
2.2 8690 0.0247 210 7240 0.0222 160 5790 0.0197 110 4340 0.0173 70
2.3 8310 0.0264 220 6920 0.0237 160 5540 0.0211 120 4150 0.0184 80
2.4 7960 0.0281 220 6630 0.0252 170 5310 0.0224 120 3980 0.0196 80
2.5 7640 0.0298 230 6370 0.0268 170 5100 0.0238 120 3820 0.0208 80
2.6 7350 0.0315 230 6120 0.0283 170 4900 0.0252 120 3670 0.0220 80
2.7 7080 0.0332 230 5900 0.0298 180 4720 0.0265 130 3540 0.0232 80
2.8 6820 0.0349 240 5690 0.0314 180 4550 0.0279 130 3410 0.0244 80
2.9 6590 0.0366 240 5490 0.0329 180 4390 0.0292 130 3290 0.0256 80
3.0 6370 0.0383 240 5310 0.0344 180 4250 0.0306 130 3180 0.0268 90
*if the machine tool or the equipment wouldn’t allow to reach the requested rpm, please use the max. available rpm recalculating the Vf value
(Vf=n available x fn)
Ø RUN OUT
<0.02mm
Material Group
ISO 513 M1 M2 M3 M4 M5
Hardness/Rm < 750 N/mm² 550-850 N/mm² 650-950 N/mm² 850-1200 N/mm²
Vc (m/min) 20-40* 20-30* 20-30* 15-25*
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
1.0 9550 0.0057 55 7960 0.0049 39 7960 0.0040 32 6370 0.0034 22
1.1 8690 0.0064 55 7240 0.0054 39 7240 0.0045 32 5790 0.0038 22
1.2 7960 0.0070 56 6630 0.0060 40 6630 0.0049 33 5310 0.0042 22
1.3 7350 0.0077 56 6120 0.0065 40 6120 0.0054 33 4900 0.0046 22
1.4 6820 0.0083 57 5690 0.0070 40 5690 0.0058 33 4550 0.0050 23
1.5 6370 0.0096 60 5310 0.0081 43 5310 0.0067 36 4250 0.0057 24
1.6 5970 0.0108 60 4980 0.0092 46 4980 0.0076 38 3980 0.0065 26
1.7 5620 0.0121 70 4680 0.0103 48 4680 0.0085 40 3750 0.0073 27
1.8 5310 0.0134 70 4420 0.0114 50 4420 0.0094 41 3540 0.0080 28
1.9 5030 0.0147 70 4190 0.0125 52 4190 0.0103 43 3350 0.0088 29
2.0 4780 0.0159 80 3980 0.0135 54 3980 0.0112 44 3180 0.0096 30
2.1 4550 0.0172 80 3790 0.0146 55 3790 0.0120 46 3030 0.0103 31
2.2 4340 0.0185 80 3620 0.0157 57 3620 0.0129 47 2900 0.0111 32
2.3 4150 0.0198 80 3460 0.0168 58 3460 0.0138 48 2770 0.0119 33
2.4 3980 0.0210 80 3320 0.0179 59 3320 0.0147 49 2650 0.0126 33
2.5 3820 0.0223 90 3180 0.0190 60 3180 0.0156 50 2550 0.0134 34
2.6 3670 0.0236 90 3060 0.0200 60 3060 0.0165 51 2450 0.0142 35
2.7 3540 0.0249 90 2950 0.0211 60 2950 0.0174 51 2360 0.0149 35
2.8 3410 0.0261 90 2840 0.0222 60 2840 0.0183 52 2270 0.0157 36
2.9 3290 0.0274 90 2750 0.0233 60 2750 0.0192 53 2200 0.0164 36
3.0 3180 0.0287 90 2650 0.0244 60 2650 0.0201 53 2120 0.0172 36
*if the machine tool or the equipment wouldn’t allow to reach the requested rpm, please use the max. available rpm recalculating the Vf value
(Vf=n available x fn)
TYPHOON - high performance solid carbide drills
150
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
SUH MINI
CUTTING PARAMETERS
3512SUH MINI
Ø RUN OUT
<0.02mm
Material Group
ISO 513 K1 K2 K3 K4
Hardness/Rm 150-250 HB 150-350 HB 120-260 HB 250-500 HB
Vc (m/min) 50-70* 40-60* 30-50* 20-40*
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
1.0 19110 0.0077 150 15920 0.0069 110 12740 0.0061 80 9550 0.0054 51
1.1 17370 0.0085 150 14480 0.0077 110 11580 0.0068 80 8690 0.0060 52
1.2 15920 0.0094 150 13270 0.0084 110 10620 0.0075 80 7960 0.0065 52
1.3 14700 0.0102 150 12250 0.0092 110 9800 0.0082 80 7350 0.0071 52
1.4 13650 0.0111 150 11370 0.0099 110 9100 0.0088 80 6820 0.0077 53
1.5 12740 0.0128 160 10620 0.0115 120 8490 0.0102 90 6370 0.0089 57
1.6 11940 0.0145 170 9950 0.0130 130 7960 0.0116 90 5970 0.0101 60
1.7 11240 0.0162 180 9370 0.0145 140 7490 0.0129 100 5620 0.0113 60
1.8 10620 0.0179 190 8850 0.0161 140 7080 0.0143 100 5310 0.0125 70
1.9 10060 0.0196 200 8380 0.0176 150 6700 0.0156 100 5030 0.0137 70
2.0 9550 0.0213 200 7960 0.0191 150 6370 0.0170 110 4780 0.0149 70
2.1 9100 0.0230 210 7580 0.0207 160 6070 0.0184 110 4550 0.0161 70
2.2 8690 0.0247 210 7240 0.0222 160 5790 0.0197 110 4340 0.0173 70
2.3 8310 0.0264 220 6920 0.0237 160 5540 0.0211 120 4150 0.0184 80
2.4 7960 0.0281 220 6630 0.0252 170 5310 0.0224 120 3980 0.0196 80
2.5 7640 0.0298 230 6370 0.0268 170 5100 0.0238 120 3820 0.0208 80
2.6 7350 0.0315 230 6120 0.0283 170 4900 0.0252 120 3670 0.0220 80
2.7 7080 0.0332 230 5900 0.0298 180 4720 0.0265 130 3540 0.0232 80
2.8 6820 0.0349 240 5690 0.0314 180 4550 0.0279 130 3410 0.0244 80
2.9 6590 0.0366 240 5490 0.0329 180 4390 0.0292 130 3290 0.0256 80
3.0 6370 0.0383 240 5310 0.0344 180 4250 0.0306 130 3180 0.0268 90
*if the machine tool or the equipment wouldn’t allow to reach the requested rpm, please use the max. available rpm recalculating the Vf value
(Vf=n available x fn)
Ø RUN OUT
<0.02mm
Material Group
ISO 513 N1 N2 N3 N4 N5
Hardness/Rm
Vc (m/min) 80-120* 80-120* 80-120* 100-140*
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
1.0 31850 0.0096 300 31850 0.0086 270 31850 0.0077 240 38220 0.0105 400
1.1 28950 0.0106 310 28950 0.0096 280 28950 0.0085 250 34740 0.0117 410
1.2 26540 0.0117 310 26540 0.0105 280 26540 0.0094 250 31850 0.0129 410
1.3 24500 0.0128 310 24500 0.0115 280 24500 0.0102 250 29400 0.0140 410
1.4 22750 0.0138 310 22750 0.0124 280 22750 0.0111 250 27300 0.0152 410
1.5 21230 0.0159 340 21230 0.0143 300 21230 0.0128 270 25480 0.0175 450
1.6 19900 0.0181 360 19900 0.0163 320 19900 0.0145 290 23890 0.0199 470
1.7 18730 0.0202 380 18730 0.0182 340 18730 0.0162 300 22480 0.0222 500
1.8 17690 0.0223 390 17690 0.0201 360 17690 0.0179 320 21230 0.0245 520
1.9 16760 0.0244 410 16760 0.0220 370 16760 0.0196 330 20110 0.0269 540
2.0 15920 0.0266 420 15920 0.0239 380 15920 0.0213 340 19110 0.0292 560
2.1 15170 0.0287 440 15170 0.0258 390 15170 0.0230 350 18200 0.0316 570
2.2 14480 0.0308 450 14480 0.0277 400 14480 0.0247 360 17370 0.0339 590
2.3 13850 0.0329 460 13850 0.0296 410 13850 0.0264 360 16620 0.0362 600
2.4 13270 0.0351 470 13270 0.0316 420 13270 0.0281 370 15920 0.0386 610
2.5 12740 0.0372 470 12740 0.0335 430 12740 0.0298 380 15290 0.0409 630
2.6 12250 0.0393 480 12250 0.0354 430 12250 0.0315 390 14700 0.0432 640
2.7 11800 0.0414 490 11800 0.0373 440 11800 0.0332 390 14150 0.0456 640
2.8 11370 0.0436 500 11370 0.0392 450 11370 0.0349 400 13650 0.0479 650
2.9 10980 0.0457 500 10980 0.0411 450 10980 0.0366 400 13180 0.0503 660
3.0 10620 0.0478 510 10620 0.0430 460 10620 0.0383 410 12740 0.0526 670
*if the machine tool or the equipment wouldn’t allow to reach the requested rpm, please use the max. available rpm recalculating the Vf value
(Vf=n available x fn)
TYPHOON - high performance solid carbide drills
151
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
SUH MINI
CUTTING PARAMETERS
3512SUH MINI
Ø RUN OUT
<0.02mm
Material Group
ISO 513 S1 S2 S3 S4 S5
Hardness/Rm < 35 HRC 35-45 HRC
Vc (m/min) 20-40* 10-20* 30-50* 20-40*
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
1.0 9550 0.0054 51 4780 0.0037 18 12740 0.0051 60 9550 0.0043 41
1.1 8690 0.0060 52 4340 0.0042 18 11580 0.0057 70 8690 0.0048 41
1.2 7960 0.0065 52 3980 0.0046 18 10620 0.0062 70 7960 0.0052 42
1.3 7350 0.0071 52 3670 0.0050 18 9800 0.0068 70 7350 0.0057 42
1.4 6820 0.0077 53 3410 0.0054 18 9100 0.0073 70 6820 0.0062 42
1.5 6370 0.0089 57 3180 0.0062 20 8490 0.0085 70 6370 0.0071 45
1.6 5970 0.0101 60 2990 0.0071 21 7960 0.0096 80 5970 0.0081 48
1.7 5620 0.0113 60 2810 0.0079 22 7490 0.0107 80 5620 0.0090 51
1.8 5310 0.0125 70 2650 0.0087 23 7080 0.0119 80 5310 0.0100 53
1.9 5030 0.0137 70 2510 0.0096 24 6700 0.0130 90 5030 0.0109 55
2.0 4780 0.0149 70 2390 0.0104 25 6370 0.0141 90 4780 0.0119 57
2.1 4550 0.0161 70 2270 0.0112 26 6070 0.0153 90 4550 0.0129 58
2.2 4340 0.0173 70 2170 0.0121 26 5790 0.0164 90 4340 0.0138 60
2.3 4150 0.0184 80 2080 0.0129 27 5540 0.0175 100 4150 0.0148 60
2.4 3980 0.0196 80 1990 0.0137 27 5310 0.0187 100 3980 0.0157 60
2.5 3820 0.0208 80 1910 0.0146 28 5100 0.0198 100 3820 0.0167 60
2.6 3670 0.0220 80 1840 0.0154 28 4900 0.0209 100 3670 0.0176 60
2.7 3540 0.0232 80 1770 0.0162 29 4720 0.0220 100 3540 0.0186 70
2.8 3410 0.0244 80 1710 0.0171 29 4550 0.0232 110 3410 0.0195 70
2.9 3290 0.0256 80 1650 0.0179 30 4390 0.0243 110 3290 0.0205 70
3.0 3180 0.0268 90 1590 0.0187 30 4250 0.0254 110 3180 0.0214 70
*if the machine tool or the equipment wouldn’t allow to reach the requested rpm, please use the max. available rpm recalculating the Vf value
(Vf=n available x fn)
TYPHOON - high performance solid carbide drills
152
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
SUH MINI
h stock standard f non-standard stock m stock exhaustion
3520SUH MINI
3 mm shank, short (20xD), polished flutes, SUH (through coolant)
20XD OSAWA
NORM 135°
PMKNSH
+++,,
+ 1st choice , suitable
D(h7) D Tol. d(h6) l l1 L drilling length EDP No. Stock
1.00 0/-0.010 3 21.5 23 65 20 x D 3520SUH0100 h
1.10 0/-0.010 3 23.7 25.2 65 20 x D 3520SUH0110 f
1.20 0/-0.010 3 25.8 27.3 65 20 x D 3520SUH0120 h
1.30 0/-0.010 3 28 29.5 65 20 x D 3520SUH0130 h
1.40 0/-0.010 3 30.1 31.6 65 20 x D 3520SUH0140 f
1.50 0/-0.010 3 32.3 33.8 75 20 x D 3520SUH0150 h
1.60 0/-0.010 3 34.4 35.9 75 20 x D 3520SUH0160 h
1.70 0/-0.010 3 36.6 38.1 75 20 x D 3520SUH0170 h
1.80 0/-0.010 3 38.7 40.2 75 20 x D 3520SUH0180 h
1.90 0/-0.010 3 40.9 42.4 75 20 x D 3520SUH0190 f
2.00 0/-0.010 3 43 46 82 20 x D 3520SUH0200 h
2.10 0/-0.010 3 45.2 48.4 82 20 x D 3520SUH0210 f
2.20 0/-0.010 3 47.3 50.6 82 20 x D 3520SUH0220 h
2.30 0/-0.010 3 49.5 53 100 20 x D 3520SUH0230 h
2.40 0/-0.010 3 51.6 55.2 100 20 x D 3520SUH0240 f
2.50 0/-0.010 3 53.8 57.6 100 20 x D 3520SUH0250 h
2.60 0/-0.010 3 55.9 59.8 100 20 x D 3520SUH0260 f
2.70 0/-0.010 3 58.1 62.2 100 20 x D 3520SUH0270 f
2.80 0/-0.010 3 60.2 64.4 100 20 x D 3520SUH0280 h
2.90 0/-0.010 3 61.4 65.8 100 20 x D 3520SUH0290 f
3.00 0/-0.010 3 64.5 69 100 20 x D 3520SUH0300 h
TYPHOON - high performance solid carbide drills
153
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
SUH MINI
CUTTING PARAMETERS
3520SUH MINI
Ø RUN OUT
<0.02mm
Material Group
ISO 513 P1 P2 P3 P4 P5 P6
Hardness/Rm 500-700 N/mm² 600-1000 N/mm² 900-1200 N/mm² 1200-1400 N/mm²
Vc (m/min) 45-65* 40-50* 30-40* 20-30*
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
1.0 17520 0.0063 110 14330 0.0057 80 11150 0.0050 56 7960 0.0044 35
1.1 15920 0.0070 110 13030 0.0063 80 10130 0.0056 57 7240 0.0049 35
1.2 14600 0.0077 110 11940 0.0069 80 9290 0.0062 57 6630 0.0054 36
1.3 13470 0.0084 110 11020 0.0076 80 8570 0.0067 58 6120 0.0059 36
1.4 12510 0.0091 110 10240 0.0082 80 7960 0.0073 58 5690 0.0064 36
1.5 11680 0.0105 120 9550 0.0095 90 7430 0.0084 60 5310 0.0074 39
1.6 10950 0.0119 130 8960 0.0107 100 6970 0.0095 70 4980 0.0083 41
1.7 10300 0.0133 140 8430 0.0120 100 6560 0.0106 70 4680 0.0093 44
1.8 9730 0.0147 140 7960 0.0132 110 6190 0.0118 70 4420 0.0103 45
1.9 9220 0.0161 150 7540 0.0145 110 5870 0.0129 80 4190 0.0113 47
2.0 8760 0.0175 150 7170 0.0158 110 5570 0.0140 80 3980 0.0123 49
2.1 8340 0.0189 160 6820 0.0170 120 5310 0.0151 80 3790 0.0132 50
2.2 7960 0.0203 160 6510 0.0183 120 5070 0.0162 80 3620 0.0142 51
2.3 7620 0.0217 170 6230 0.0195 120 4850 0.0174 80 3460 0.0152 53
2.4 7300 0.0231 170 5970 0.0208 120 4640 0.0185 90 3320 0.0162 54
2.5 7010 0.0245 170 5730 0.0221 130 4460 0.0196 90 3180 0.0172 55
2.6 6740 0.0259 170 5510 0.0233 130 4290 0.0207 90 3060 0.0181 55
2.7 6490 0.0273 180 5310 0.0246 130 4130 0.0218 90 2950 0.0191 56
2.8 6260 0.0287 180 5120 0.0258 130 3980 0.0230 90 2840 0.0201 57
2.9 6040 0.0301 180 4940 0.0271 130 3840 0.0241 90 2750 0.0211 58
3.0 5840 0.0315 180 4780 0.0284 140 3720 0.0252 90 2650 0.0221 58
*if the machine tool or the equipment wouldn’t allow to reach the requested rpm, please use the max. available rpm recalculating the Vf value
(Vf=n available x fn)
Ø RUN OUT
<0.02mm
Material Group
ISO 513 M1 M2 M3 M4 M5
Hardness/Rm < 750 N/mm² 550-850 N/mm² 650-950 N/mm² 850-1200 N/mm²
Vc (m/min) 20-30* 15-25* 15-25* 10-20*
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
1.0 7960 0.0047 38 6370 0.0040 26 6370 0.0033 21 4780 0.0028 14
1.1 7240 0.0053 38 5790 0.0045 26 5790 0.0037 21 4340 0.0032 14
1.2 6630 0.0058 38 5310 0.0049 26 5310 0.0040 21 3980 0.0035 14
1.3 6120 0.0063 39 4900 0.0054 26 4900 0.0044 22 3670 0.0038 14
1.4 5690 0.0068 39 4550 0.0058 26 4550 0.0048 22 3410 0.0041 14
1.5 5310 0.0079 42 4250 0.0067 28 4250 0.0055 23 3180 0.0047 15
1.6 4980 0.0089 44 3980 0.0076 30 3980 0.0062 25 2990 0.0054 16
1.7 4680 0.0100 47 3750 0.0085 32 3750 0.0070 26 2810 0.0060 17
1.8 4420 0.0110 49 3540 0.0094 33 3540 0.0077 27 2650 0.0066 18
1.9 4190 0.0121 51 3350 0.0103 34 3350 0.0085 28 2510 0.0072 18
2.0 3980 0.0131 52 3180 0.0112 35 3180 0.0092 29 2390 0.0079 19
2.1 3790 0.0142 54 3030 0.0120 37 3030 0.0099 30 2270 0.0085 19
2.2 3620 0.0152 55 2900 0.0129 38 2900 0.0107 31 2170 0.0091 20
2.3 3460 0.0163 56 2770 0.0138 38 2770 0.0114 32 2080 0.0098 20
2.4 3320 0.0173 58 2650 0.0147 39 2650 0.0121 32 1990 0.0104 21
2.5 3180 0.0184 58 2550 0.0156 40 2550 0.0129 33 1910 0.0110 21
2.6 3060 0.0194 59 2450 0.0165 40 2450 0.0136 33 1840 0.0117 21
2.7 2950 0.0205 60 2360 0.0174 41 2360 0.0143 34 1770 0.0123 22
2.8 2840 0.0215 60 2270 0.0183 42 2270 0.0151 34 1710 0.0129 22
2.9 2750 0.0226 60 2200 0.0192 42 2200 0.0158 35 1650 0.0135 22
3.0 2650 0.0236 60 2120 0.0201 43 2120 0.0165 35 1590 0.0142 23
*if the machine tool or the equipment wouldn’t allow to reach the requested rpm, please use the max. available rpm recalculating the Vf value
(Vf=n available x fn)
TYPHOON - high performance solid carbide drills
154
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
SUH MINI
CUTTING PARAMETERS
3520SUH MINI
Ø RUN OUT
<0.02mm
Material Group
ISO 513 K1 K2 K3 K4
Hardness/Rm 150-250 HB 150-350 HB 120-260 HB 250-500 HB
Vc (m/min) 45-65* 40-50* 30-40* 20-30*
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
1.0 17520 0.0063 110 14330 0.0057 80 11150 0.0050 56 7960 0.0044 35
1.1 15920 0.0070 110 13030 0.0063 80 10130 0.0056 57 7240 0.0049 35
1.2 14600 0.0077 110 11940 0.0069 80 9290 0.0062 57 6630 0.0054 36
1.3 13470 0.0084 110 11020 0.0076 80 8570 0.0067 58 6120 0.0059 36
1.4 12510 0.0091 110 10240 0.0082 80 7960 0.0073 58 5690 0.0064 36
1.5 11680 0.0105 120 9550 0.0095 90 7430 0.0084 62 5310 0.0074 39
1.6 10950 0.0119 130 8960 0.0107 100 6970 0.0095 66 4980 0.0083 41
1.7 10300 0.0133 140 8430 0.0120 100 6560 0.0106 70 4680 0.0093 44
1.8 9730 0.0147 140 7960 0.0132 110 6190 0.0118 70 4420 0.0103 45
1.9 9220 0.0161 150 7540 0.0145 110 5870 0.0129 80 4190 0.0113 47
2.0 8760 0.0175 150 7170 0.0158 110 5570 0.0140 80 3980 0.0123 49
2.1 8340 0.0189 160 6820 0.0170 120 5310 0.0151 80 3790 0.0132 50
2.2 7960 0.0203 160 6510 0.0183 120 5070 0.0162 80 3620 0.0142 51
2.3 7620 0.0217 170 6230 0.0195 120 4850 0.0174 80 3460 0.0152 53
2.4 7300 0.0231 170 5970 0.0208 120 4640 0.0185 90 3320 0.0162 54
2.5 7010 0.0245 170 5730 0.0221 130 4460 0.0196 90 3180 0.0172 55
2.6 6740 0.0259 170 5510 0.0233 130 4290 0.0207 90 3060 0.0181 55
2.7 6490 0.0273 180 5310 0.0246 130 4130 0.0218 90 2950 0.0191 56
2.8 6260 0.0287 180 5120 0.0258 130 3980 0.0230 90 2840 0.0201 57
2.9 6040 0.0301 180 4940 0.0271 130 3840 0.0241 90 2750 0.0211 58
3.0 5840 0.0315 180 4780 0.0284 140 3720 0.0252 90 2650 0.0221 58
*if the machine tool or the equipment wouldn’t allow to reach the requested rpm, please use the max. available rpm recalculating the Vf value
(Vf=n available x fn)
Ø RUN OUT
<0.02mm
Material Group
ISO 513 N1 N2 N3 N4 N5
Hardness/Rm
Vc (m/min) 80-100* 80-120* 80-120* 80-120*
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
1.0 28660 0.0079 230 28660 0.0071 200 28660 0.0063 180 38220 0.0087 330
1.1 26060 0.0088 230 26060 0.0079 210 26060 0.0070 180 34740 0.0096 330
1.2 23890 0.0096 230 23890 0.0087 210 23890 0.0077 180 31850 0.0106 340
1.3 22050 0.0105 230 22050 0.0095 210 22050 0.0084 190 29400 0.0116 340
1.4 20470 0.0114 230 20470 0.0102 210 20470 0.0091 190 27300 0.0125 340
1.5 19110 0.0131 250 19110 0.0118 230 19110 0.0105 200 25480 0.0144 370
1.6 17910 0.0149 270 17910 0.0134 240 17910 0.0119 210 23890 0.0164 390
1.7 16860 0.0166 280 16860 0.0150 250 16860 0.0133 220 22480 0.0183 410
1.8 15920 0.0184 290 15920 0.0165 260 15920 0.0147 230 21230 0.0202 430
1.9 15090 0.0201 300 15090 0.0181 270 15090 0.0161 240 20110 0.0221 450
2.0 14330 0.0219 310 14330 0.0197 280 14330 0.0175 250 19110 0.0241 460
2.1 13650 0.0236 320 13650 0.0213 290 13650 0.0189 260 18200 0.0260 470
2.2 13030 0.0254 330 13030 0.0228 300 13030 0.0203 260 17370 0.0279 480
2.3 12460 0.0271 340 12460 0.0244 300 12460 0.0217 270 16620 0.0298 500
2.4 11940 0.0289 340 11940 0.0260 310 11940 0.0231 280 15920 0.0318 510
2.5 11460 0.0306 350 11460 0.0276 320 11460 0.0245 280 15290 0.0337 520
2.6 11020 0.0324 360 11020 0.0291 320 11020 0.0259 290 14700 0.0356 520
2.7 10620 0.0341 360 10620 0.0307 330 10620 0.0273 290 14150 0.0375 530
2.8 10240 0.0359 370 10240 0.0323 330 10240 0.0287 290 13650 0.0395 540
2.9 9880 0.0376 370 9880 0.0339 330 9880 0.0301 300 13180 0.0414 550
3.0 9550 0.0394 380 9550 0.0354 340 9550 0.0315 300 12740 0.0433 550
*if the machine tool or the equipment wouldn’t allow to reach the requested rpm, please use the max. available rpm recalculating the Vf value
(Vf=n available x fn)
TYPHOON - high performance solid carbide drills
155
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
SUH MINI
CUTTING PARAMETERS
3520SUH MINI
Ø RUN OUT
<0.02mm
Material Group
ISO 513 S1 S2 S3 S4 S5
Hardness/Rm < 35 HRC 35-45 HRC
Vc (m/min) 20-30* 10-20* 30-40* 20-30*
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
1.0 7960 0.0044 35 6370 0.0031 20 11150 0.0042 47 7960 0.0035 28
1.1 7240 0.0049 35 5790 0.0034 20 10130 0.0047 47 7240 0.0039 28
1.2 6630 0.0054 36 5310 0.0038 20 9290 0.0051 48 6630 0.0043 29
1.3 6120 0.0059 36 4900 0.0041 20 8570 0.0056 48 6120 0.0047 29
1.4 5690 0.0064 36 4550 0.0045 20 7960 0.0061 48 5690 0.0051 29
1.5 5310 0.0074 39 4250 0.0051 22 7430 0.0070 52 5310 0.0059 31
1.6 4980 0.0083 41 3980 0.0058 23 6970 0.0079 55 4980 0.0067 33
1.7 4680 0.0093 44 3750 0.0065 24 6560 0.0088 58 4680 0.0074 35
1.8 4420 0.0103 45 3540 0.0072 25 6190 0.0098 60 4420 0.0082 36
1.9 4190 0.0113 47 3350 0.0079 26 5870 0.0107 60 4190 0.0090 38
2.0 3980 0.0123 49 3180 0.0086 27 5570 0.0116 60 3980 0.0098 39
2.1 3790 0.0132 50 3030 0.0093 28 5310 0.0126 70 3790 0.0106 40
2.2 3620 0.0142 51 2900 0.0099 29 5070 0.0135 70 3620 0.0114 41
2.3 3460 0.0152 53 2770 0.0106 29 4850 0.0144 70 3460 0.0122 42
2.4 3320 0.0162 54 2650 0.0113 30 4640 0.0154 70 3320 0.0129 43
2.5 3180 0.0172 55 2550 0.0120 31 4460 0.0163 70 3180 0.0137 44
2.6 3060 0.0181 55 2450 0.0127 31 4290 0.0172 70 3060 0.0145 44
2.7 2950 0.0191 56 2360 0.0134 32 4130 0.0182 70 2950 0.0153 45
2.8 2840 0.0201 57 2270 0.0141 32 3980 0.0191 80 2840 0.0161 46
2.9 2750 0.0211 58 2200 0.0147 32 3840 0.0200 80 2750 0.0169 46
3.0 2650 0.0221 58 2120 0.0154 33 3720 0.0209 80 2650 0.0176 47
*if the machine tool or the equipment wouldn’t allow to reach the requested rpm, please use the max. available rpm recalculating the Vf value
(Vf=n available x fn)
TYPHOON - high performance solid carbide drills
156
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
SUH MINI
h stock standard f non-standard stock m stock exhaustion
3525SUH MINI
3 mm shank, short (25xD), polished flutes, SUH (through coolant)
25XD OSAWA
NORM 135°
PMKNSH
+++,,
+ 1st choice , suitable
D(h7) D Tol. d(h6) l l1 L drilling length EDP No. Stock
1.00 0/-0.010 3 26.5 28 70 25 x D 3525SUH0100 h
1.10 0/-0.010 3 29.2 30.7 70 25 x D 3525SUH0110 f
1.20 0/-0.010 3 31.8 33.3 75 25 x D 3525SUH0120 f
1.30 0/-0.010 3 34.5 36 75 25 x D 3525SUH0130 f
1.40 0/-0.010 3 37.1 38.6 75 25 x D 3525SUH0140 f
1.50 0/-0.010 3 39.8 41.3 80 25 x D 3525SUH0150 h
1.60 0/-0.010 3 42.4 43.9 80 25 x D 3525SUH0160 f
1.70 0/-0.010 3 45.1 46.6 80 25 x D 3525SUH0170 f
1.80 0/-0.010 3 47.7 49.2 90 25 x D 3525SUH0180 f
1.90 0/-0.010 3 50.4 51.9 90 25 x D 3525SUH0190 f
2.00 0/-0.010 3 53 56 90 25 x D 3525SUH0200 h
2.10 0/-0.010 3 55.7 58.8 100 25 x D 3525SUH0210 f
2.20 0/-0.010 3 58.3 61.6 100 25 x D 3525SUH0220 f
2.30 0/-0.010 3 61 64.4 100 25 x D 3525SUH0230 f
2.40 0/-0.010 3 63.6 67.2 100 25 x D 3525SUH0240 f
2.50 0/-0.010 3 66.3 70 110 25 x D 3525SUH0250 h
2.60 0/-0.010 3 68.9 72.8 110 25 x D 3525SUH0260 f
2.70 0/-0.010 3 71.6 75.6 110 25 x D 3525SUH0270 f
2.80 0/-0.010 3 74.2 78.4 110 25 x D 3525SUH0280 f
2.90 0/-0.010 3 76.9 81.2 120 25 x D 3525SUH0290 f
3.00 0/-0.010 3 79.5 84 120 25 x D 3525SUH0300 h
TYPHOON - high performance solid carbide drills
157
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
SUH MINI
CUTTING PARAMETERS
3525SUH MINI
Ø RUN OUT
<0.02mm
Material Group
ISO 513 P1 P2 P3 P4 P5 P6
Hardness/Rm 500-700 N/mm² 600-1000 N/mm² 900-1200 N/mm² 1200-1400 N/mm²
Vc (m/min) 45-55* 35-45* 25-35* 15-25*
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
1.0 15920 0.0054 90 12740 0.0049 60 9550 0.0043 41 6370 0.0038 24
1.1 14480 0.0060 90 11580 0.0054 60 8690 0.0048 42 5790 0.0042 24
1.2 13270 0.0066 90 10620 0.0059 60 7960 0.0053 42 5310 0.0046 25
1.3 12250 0.0072 90 9800 0.0065 60 7350 0.0058 42 4900 0.0050 25
1.4 11370 0.0078 90 9100 0.0070 60 6820 0.0062 43 4550 0.0055 25
1.5 10620 0.0090 100 8490 0.0081 70 6370 0.0072 46 4250 0.0063 27
1.6 9950 0.0102 100 7960 0.0092 70 5970 0.0082 49 3980 0.0071 28
1.7 9370 0.0114 110 7490 0.0103 80 5620 0.0091 51 3750 0.0080 30
1.8 8850 0.0126 110 7080 0.0113 80 5310 0.0101 54 3540 0.0088 31
1.9 8380 0.0138 120 6700 0.0124 80 5030 0.0110 56 3350 0.0097 32
2.0 7960 0.0150 120 6370 0.0135 90 4780 0.0120 57 3180 0.0105 33
2.1 7580 0.0162 120 6070 0.0146 90 4550 0.0130 59 3030 0.0113 34
2.2 7240 0.0174 130 5790 0.0157 90 4340 0.0139 60 2900 0.0122 35
2.3 6920 0.0186 130 5540 0.0167 90 4150 0.0149 60 2770 0.0130 36
2.4 6630 0.0198 130 5310 0.0178 90 3980 0.0158 60 2650 0.0139 37
2.5 6370 0.0210 130 5100 0.0189 100 3820 0.0168 60 2550 0.0147 37
2.6 6120 0.0222 140 4900 0.0200 100 3670 0.0178 70 2450 0.0155 38
2.7 5900 0.0234 140 4720 0.0211 100 3540 0.0187 70 2360 0.0164 39
2.8 5690 0.0246 140 4550 0.0221 100 3410 0.0197 70 2270 0.0172 39
2.9 5490 0.0258 140 4390 0.0232 100 3290 0.0206 70 2200 0.0181 40
3.0 5310 0.0270 140 4250 0.0243 100 3180 0.0216 70 2120 0.0189 40
*if the machine tool or the equipment wouldn’t allow to reach the requested rpm, please use the max. available rpm recalculating the Vf value
(Vf=n available x fn)
Ø RUN OUT
<0.02mm
Material Group
ISO 513 M1 M2 M3 M4 M5
Hardness/Rm < 750 N/mm² 550-850 N/mm² 650-950 N/mm² 850-1200 N/mm²
Vc (m/min) 15-25* 10-20* 10-20* 8-12*
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
1.0 6370 0.0041 26 4780 0.0034 16 4780 0.0028 14 3180 0.0024 8
1.1 5790 0.0045 26 4343 0.0038 17 4343 0.0032 14 2895 0.0027 8
1.2 5308 0.0050 26 3981 0.0042 17 3981 0.0035 14 2654 0.0030 8
1.3 4900 0.0054 26 3675 0.0046 17 3675 0.0038 14 2450 0.0032 8
1.4 4550 0.0059 27 3412 0.0050 17 3412 0.0041 14 2275 0.0035 8
1.5 4246 0.0068 29 3185 0.0057 18 3185 0.0047 15 2123 0.0041 9
1.6 3981 0.0077 30 2986 0.0065 19 2986 0.0054 16 1990 0.0046 9
1.7 3747 0.0086 32 2810 0.0073 20 2810 0.0060 17 1873 0.0051 10
1.8 3539 0.0095 33 2654 0.0080 21 2654 0.0066 18 1769 0.0057 10
1.9 3352 0.0104 35 2514 0.0088 22 2514 0.0072 18 1676 0.0062 10
2.0 3185 0.0113 36 2389 0.0096 23 2389 0.0079 19 1592 0.0068 11
2.1 3033 0.0122 37 2275 0.0103 23 2275 0.0085 19 1517 0.0073 11
2.2 2895 0.0131 38 2171 0.0111 24 2171 0.0091 20 1448 0.0078 11
2.3 2769 0.0140 39 2077 0.0119 25 2077 0.0098 20 1385 0.0084 12
2.4 2654 0.0149 39 1990 0.0126 25 1990 0.0104 21 1327 0.0089 12
2.5 2548 0.0158 40 1911 0.0134 26 1911 0.0110 21 1274 0.0095 12
2.6 2450 0.0167 41 1837 0.0142 26 1837 0.0117 21 1225 0.0100 12
2.7 2359 0.0176 41 1769 0.0149 26 1769 0.0123 22 1180 0.0105 12
2.8 2275 0.0185 42 1706 0.0157 27 1706 0.0129 22 1137 0.0111 13
2.9 2196 0.0194 42 1647 0.0164 27 1647 0.0135 22 1098 0.0116 13
3.0 2123 0.0203 43 1592 0.0172 27 1592 0.0142 23 1062 0.0122 13
*if the machine tool or the equipment wouldn’t allow to reach the requested rpm, please use the max. available rpm recalculating the Vf value
(Vf=n available x fn)
TYPHOON - high performance solid carbide drills
158
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
SUH MINI
CUTTING PARAMETERS
3525SUH MINI
Ø RUN OUT
<0.02mm
Material Group
ISO 513 K1 K2 K3 K4
Hardness/Rm 150-250 HB 150-350 HB 120-260 HB 250-500 HB
Vc (m/min) 45-55* 35-45* 25-35* 15-25*
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
1.0 15920 0.0054 90 12740 0.0049 60 9550 0.0043 41 6370 0.0038 24
1.1 14480 0.0060 90 11580 0.0054 60 8690 0.0048 42 5790 0.0042 24
1.2 13270 0.0066 90 10620 0.0059 60 7960 0.0053 42 5310 0.0046 25
1.3 12250 0.0072 90 9800 0.0065 60 7350 0.0058 42 4900 0.0050 25
1.4 11370 0.0078 90 9100 0.0070 60 6820 0.0062 43 4550 0.0055 25
1.5 10620 0.0090 100 8490 0.0081 70 6370 0.0072 46 4250 0.0063 27
1.6 9950 0.0102 100 7960 0.0092 70 5970 0.0082 49 3980 0.0071 28
1.7 9370 0.0114 110 7490 0.0103 80 5620 0.0091 51 3750 0.0080 30
1.8 8850 0.0126 110 7080 0.0113 80 5310 0.0101 54 3540 0.0088 31
1.9 8380 0.0138 120 6700 0.0124 80 5030 0.0110 56 3350 0.0097 32
2.0 7960 0.0150 120 6370 0.0135 90 4780 0.0120 57 3180 0.0105 33
2.1 7580 0.0162 120 6070 0.0146 90 4550 0.0130 59 3030 0.0113 34
2.2 7240 0.0174 130 5790 0.0157 90 4340 0.0139 60 2900 0.0122 35
2.3 6920 0.0186 130 5540 0.0167 90 4150 0.0149 60 2770 0.0130 36
2.4 6630 0.0198 130 5310 0.0178 90 3980 0.0158 60 2650 0.0139 37
2.5 6370 0.0210 130 5100 0.0189 100 3820 0.0168 60 2550 0.0147 37
2.6 6120 0.0222 140 4900 0.0200 100 3670 0.0178 70 2450 0.0155 38
2.7 5900 0.0234 140 4720 0.0211 100 3540 0.0187 70 2360 0.0164 39
2.8 5690 0.0246 140 4550 0.0221 100 3410 0.0197 70 2270 0.0172 39
2.9 5490 0.0258 140 4390 0.0232 100 3290 0.0206 70 2200 0.0181 40
3.0 5310 0.0270 140 4250 0.0243 100 3180 0.0216 70 2120 0.0189 40
*if the machine tool or the equipment wouldn’t allow to reach the requested rpm, please use the max. available rpm recalculating the Vf value
(Vf=n available x fn)
Ø RUN OUT
<0.02mm
Material Group
ISO 513 N1 N2 N3 N4 N5
Hardness/Rm
Vc (m/min) 60-80* 60-80* 60-80* 90-110*
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
1.0 22290 0.0068 150 22290 0.0061 140 22290 0.0054 120 31850 0.0074 240
1.1 20270 0.0075 150 20270 0.0068 140 20270 0.0060 120 28950 0.0083 240
1.2 18580 0.0083 150 18580 0.0074 140 18580 0.0066 120 26540 0.0091 240
1.3 17150 0.0090 150 17150 0.0081 140 17150 0.0072 120 24500 0.0099 240
1.4 15920 0.0098 160 15920 0.0088 140 15920 0.0078 120 22750 0.0107 240
1.5 14860 0.0113 170 14860 0.0101 150 14860 0.0090 130 21230 0.0124 260
1.6 13930 0.0128 180 13930 0.0115 160 13930 0.0102 140 19900 0.0140 280
1.7 13110 0.0143 190 13110 0.0128 170 13110 0.0114 150 18730 0.0157 290
1.8 12380 0.0158 190 12380 0.0142 180 12380 0.0126 160 17690 0.0173 310
1.9 11730 0.0173 200 11730 0.0155 180 11730 0.0138 160 16760 0.0190 320
2.0 11150 0.0188 210 11150 0.0169 190 11150 0.0150 170 15920 0.0206 330
2.1 10620 0.0203 220 10620 0.0182 190 10620 0.0162 170 15170 0.0223 340
2.2 10130 0.0218 220 10130 0.0196 200 10130 0.0174 180 14480 0.0239 350
2.3 9690 0.0233 230 9690 0.0209 200 9690 0.0186 180 13850 0.0256 350
2.4 9290 0.0248 230 9290 0.0223 210 9290 0.0198 180 13270 0.0272 360
2.5 8920 0.0263 230 8920 0.0236 210 8920 0.0210 190 12740 0.0289 370
2.6 8570 0.0278 240 8570 0.0250 210 8570 0.0222 190 12250 0.0305 370
2.7 8260 0.0293 240 8260 0.0263 220 8260 0.0234 190 11800 0.0322 380
2.8 7960 0.0308 240 7960 0.0277 220 7960 0.0246 200 11370 0.0338 380
2.9 7690 0.0323 250 7690 0.0290 220 7690 0.0258 200 10980 0.0355 390
3.0 7430 0.0338 250 7430 0.0304 230 7430 0.0270 200 10620 0.0371 390
*if the machine tool or the equipment wouldn’t allow to reach the requested rpm, please use the max. available rpm recalculating the Vf value
(Vf=n available x fn)
TYPHOON - high performance solid carbide drills
159
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
SUH MINI
CUTTING PARAMETERS
3525SUH MINI
Ø RUN OUT
<0.02mm
Material Group
ISO 513 S1 S2 S3 S4 S5
Hardness/Rm < 35 HRC 35-45 HRC
Vc (m/min) 10-20* 10-20* 25-35* 10-20*
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
1.0 6370 0.0038 24 4780 0.0026 13 9550 0.0036 34 6370 0.0030 19
1.1 5790 0.0042 24 4340 0.0029 13 8690 0.0040 35 5790 0.0034 19
1.2 5310 0.0046 25 3980 0.0032 13 7960 0.0044 35 5310 0.0037 20
1.3 4900 0.0050 25 3670 0.0035 13 7350 0.0048 35 4900 0.0040 20
1.4 4550 0.0055 25 3410 0.0038 13 6820 0.0052 35 4550 0.0044 20
1.5 4250 0.0063 27 3180 0.0044 14 6370 0.0060 38 4250 0.0050 21
1.6 3980 0.0071 28 2990 0.0050 15 5970 0.0068 40 3980 0.0057 23
1.7 3750 0.0080 30 2810 0.0056 16 5620 0.0076 43 3750 0.0064 24
1.8 3540 0.0088 31 2650 0.0062 16 5310 0.0084 44 3540 0.0071 25
1.9 3350 0.0097 32 2510 0.0068 17 5030 0.0092 46 3350 0.0077 26
2.0 3180 0.0105 33 2390 0.0074 18 4780 0.0100 48 3180 0.0084 27
2.1 3030 0.0113 34 2270 0.0079 18 4550 0.0108 49 3030 0.0091 27
2.2 2900 0.0122 35 2170 0.0085 19 4340 0.0116 50 2900 0.0097 28
2.3 2770 0.0130 36 2080 0.0091 19 4150 0.0124 51 2770 0.0104 29
2.4 2650 0.0139 37 1990 0.0097 19 3980 0.0132 52 2650 0.0111 29
2.5 2550 0.0147 37 1910 0.0103 20 3820 0.0140 53 2550 0.0118 30
2.6 2450 0.0155 38 1840 0.0109 20 3670 0.0148 54 2450 0.0124 30
2.7 2360 0.0164 39 1770 0.0115 20 3540 0.0156 55 2360 0.0131 31
2.8 2270 0.0172 39 1710 0.0121 21 3410 0.0164 56 2270 0.0138 31
2.9 2200 0.0181 40 1650 0.0126 21 3290 0.0172 56 2200 0.0144 32
3.0 2120 0.0189 40 1590 0.0132 21 3180 0.0180 57 2120 0.0151 32
*if the machine tool or the equipment wouldn’t allow to reach the requested rpm, please use the max. available rpm recalculating the Vf value
(Vf=n available x fn)
TYPHOON - high performance solid carbide drills
160
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
SUH MINI
h stock standard f non-standard stock m stock exhaustion
3530SUH MINI
3 mm shank, short (30xD), polished flutes, SUH (through coolant)
30XD OSAWA
NORM 135°
PMKNSH
+++,,
+ 1st choice , suitable
D(h7) D Tol. d(h6) l l1 L drilling length EDP No. Stock
1.00 0/-0.010 3 31.5 33 75 30 x D 3530SUH0100 h
1.10 0/-0.010 3 34.7 36.2 75 30 x D 3530SUH0110 f
1.20 0/-0.010 3 37.8 39.3 75 30 x D 3530SUH0120 f
1.30 0/-0.010 3 41 42.5 85 30 x D 3530SUH0130 f
1.40 0/-0.010 3 44.1 45.6 85 30 x D 3530SUH0140 f
1.50 0/-0.010 3 47.3 48.8 85 30 x D 3530SUH0150 h
1.60 0/-0.010 3 50.4 51.9 90 30 x D 3530SUH0160 f
1.70 0/-0.010 3 53.6 55.1 90 30 x D 3530SUH0170 f
1.80 0/-0.010 3 56.7 58.2 100 30 x D 3530SUH0180 f
1.90 0/-0.010 3 59.9 61.4 100 30 x D 3530SUH0190 f
2.00 0/-0.010 3 63 66 100 30 x D 3530SUH0200 h
2.10 0/-0.010 3 66.2 69.3 110 30 x D 3530SUH0210 f
2.20 0/-0.010 3 69.3 72.6 110 30 x D 3530SUH0220 f
2.30 0/-0.010 3 72.5 75.9 110 30 x D 3530SUH0230 f
2.40 0/-0.010 3 75.6 79.2 120 30 x D 3530SUH0240 f
2.50 0/-0.010 3 78.8 82.5 120 30 x D 3530SUH0250 h
2.60 0/-0.010 3 81.9 85.8 120 30 x D 3530SUH0260 f
2.70 0/-0.010 3 85.1 89.1 130 30 x D 3530SUH0270 f
2.80 0/-0.010 3 88.2 92.4 130 30 x D 3530SUH0280 f
2.90 0/-0.010 3 91.4 95.7 130 30 x D 3530SUH0290 f
3.00 0/-0.010 3 94.5 99 130 30 x D 3530SUH0300 h
TYPHOON - high performance solid carbide drills
161
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
SUH MINI
CUTTING PARAMETERS
3530SUH MINI
Ø RUN OUT
<0.02mm
Material Group
ISO 513 P1 P2 P3 P4 P5 P6
Hardness/Rm 500-700 N/mm² 600-1000 N/mm² 900-1200 N/mm² 1200-1400 N/mm²
Vc (m/min) 45-55* 35-45* 25-35* 15-25*
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
1.0 15920 0.0050 80 12740 0.0045 57 9550 0.0040 38 6370 0.0035 22
1.1 14480 0.0055 80 11580 0.0050 57 8690 0.0044 38 5790 0.0039 22
1.2 13270 0.0061 80 10620 0.0054 58 7960 0.0048 39 5310 0.0042 22
1.3 12250 0.0066 80 9800 0.0059 58 7350 0.0053 39 4900 0.0046 23
1.4 11370 0.0072 80 9100 0.0064 59 6820 0.0057 39 4550 0.0050 23
1.5 10620 0.0083 90 8490 0.0074 60 6370 0.0066 42 4250 0.0058 25
1.6 9950 0.0094 90 7960 0.0084 70 5970 0.0075 45 3980 0.0065 26
1.7 9370 0.0105 100 7490 0.0094 70 5620 0.0084 47 3750 0.0073 27
1.8 8850 0.0116 100 7080 0.0104 70 5310 0.0092 49 3540 0.0081 29
1.9 8380 0.0127 110 6700 0.0114 80 5030 0.0101 51 3350 0.0089 30
2.0 7960 0.0138 110 6370 0.0124 80 4780 0.0110 53 3180 0.0096 31
2.1 7580 0.0149 110 6070 0.0134 80 4550 0.0119 54 3030 0.0104 31
2.2 7240 0.0160 120 5790 0.0144 80 4340 0.0128 55 2900 0.0112 32
2.3 6920 0.0171 120 5540 0.0153 90 4150 0.0136 57 2770 0.0119 33
2.4 6630 0.0182 120 5310 0.0163 90 3980 0.0145 58 2650 0.0127 34
2.5 6370 0.0193 120 5100 0.0173 90 3820 0.0154 59 2550 0.0135 34
2.6 6120 0.0204 120 4900 0.0183 90 3670 0.0163 60 2450 0.0142 35
2.7 5900 0.0215 130 4720 0.0193 90 3540 0.0172 60 2360 0.0150 35
2.8 5690 0.0226 130 4550 0.0203 90 3410 0.0180 60 2270 0.0158 36
2.9 5490 0.0237 130 4390 0.0213 90 3290 0.0189 60 2200 0.0166 36
3.0 5310 0.0248 130 4250 0.0223 90 3180 0.0198 60 2120 0.0173 37
*if the machine tool or the equipment wouldn’t allow to reach the requested rpm, please use the max. available rpm recalculating the Vf value
(Vf=n available x fn)
Ø RUN OUT
<0.02mm
Material Group
ISO 513 M1 M2 M3 M4 M5
Hardness/Rm < 750 N/mm² 550-850 N/mm² 650-950 N/mm² 850-1200 N/mm²
Vc (m/min) 15-25* 10-20* 10-20* 8-12*
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
1.0 6370 0.0037 24 4780 0.0032 15 4780 0.0026 12 3180 0.0022 7
1.1 5790 0.0041 24 4343 0.0035 15 4343 0.0029 13 2895 0.0025 7
1.2 5308 0.0045 24 3981 0.0039 15 3981 0.0032 13 2654 0.0027 7
1.3 4900 0.0050 24 3675 0.0042 15 3675 0.0035 13 2450 0.0030 7
1.4 4550 0.0054 24 3412 0.0046 16 3412 0.0038 13 2275 0.0032 7
1.5 4246 0.0062 26 3185 0.0053 17 3185 0.0043 14 2123 0.0037 8
1.6 3981 0.0070 28 2986 0.0060 18 2986 0.0049 15 1990 0.0042 8
1.7 3747 0.0078 29 2810 0.0067 19 2810 0.0055 15 1873 0.0047 9
1.8 3539 0.0087 31 2654 0.0074 20 2654 0.0061 16 1769 0.0052 9
1.9 3352 0.0095 32 2514 0.0081 20 2514 0.0066 17 1676 0.0057 10
2.0 3185 0.0103 33 2389 0.0088 21 2389 0.0072 17 1592 0.0062 10
2.1 3033 0.0111 34 2275 0.0095 22 2275 0.0078 18 1517 0.0067 10
2.2 2895 0.0120 35 2171 0.0102 22 2171 0.0084 18 1448 0.0072 10
2.3 2769 0.0128 35 2077 0.0109 23 2077 0.0090 19 1385 0.0077 11
2.4 2654 0.0136 36 1990 0.0116 23 1990 0.0095 19 1327 0.0082 11
2.5 2548 0.0144 37 1911 0.0123 23 1911 0.0101 19 1274 0.0087 11
2.6 2450 0.0153 37 1837 0.0130 24 1837 0.0107 20 1225 0.0092 11
2.7 2359 0.0161 38 1769 0.0137 24 1769 0.0113 20 1180 0.0097 11
2.8 2275 0.0169 38 1706 0.0144 25 1706 0.0118 20 1137 0.0101 12
2.9 2196 0.0177 39 1647 0.0151 25 1647 0.0124 20 1098 0.0106 12
3.0 2123 0.0186 39 1592 0.0158 25 1592 0.0130 21 1062 0.0111 12
*if the machine tool or the equipment wouldn’t allow to reach the requested rpm, please use the max. available rpm recalculating the Vf value
(Vf=n available x fn)
TYPHOON - high performance solid carbide drills
162
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
SUH MINI
CUTTING PARAMETERS
3530SUH MINI
Ø RUN OUT
<0.02mm
Material Group
ISO 513 K1 K2 K3 K4
Hardness/Rm 150-250 HB 150-350 HB 120-260 HB 250-500 HB
Vc (m/min) 45-55* 35-45* 25-35* 15-25*
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
1.0 15920 0.0050 80 12740 0.0045 57 9550 0.0040 38 6370 0.0035 22
1.1 14480 0.0055 80 11580 0.0050 57 8690 0.0044 38 5790 0.0039 22
1.2 13270 0.0061 80 10620 0.0054 58 7960 0.0048 39 5310 0.0042 22
1.3 12250 0.0066 80 9800 0.0059 58 7350 0.0053 39 4900 0.0046 23
1.4 11370 0.0072 80 9100 0.0064 59 6820 0.0057 39 4550 0.0050 23
1.5 10620 0.0083 90 8490 0.0074 60 6370 0.0066 42 4250 0.0058 25
1.6 9950 0.0094 90 7960 0.0084 70 5970 0.0075 45 3980 0.0065 26
1.7 9370 0.0105 100 7490 0.0094 70 5620 0.0084 47 3750 0.0073 27
1.8 8850 0.0116 100 7080 0.0104 70 5310 0.0092 49 3540 0.0081 29
1.9 8380 0.0127 110 6700 0.0114 80 5030 0.0101 51 3350 0.0089 30
2.0 7960 0.0138 110 6370 0.0124 80 4780 0.0110 53 3180 0.0096 31
2.1 7580 0.0149 110 6070 0.0134 80 4550 0.0119 54 3030 0.0104 31
2.2 7240 0.0160 120 5790 0.0144 80 4340 0.0128 55 2900 0.0112 32
2.3 6920 0.0171 120 5540 0.0153 90 4150 0.0136 57 2770 0.0119 33
2.4 6630 0.0182 120 5310 0.0163 90 3980 0.0145 58 2650 0.0127 34
2.5 6370 0.0193 120 5100 0.0173 90 3820 0.0154 59 2550 0.0135 34
2.6 6120 0.0204 120 4900 0.0183 90 3670 0.0163 60 2450 0.0142 35
2.7 5900 0.0215 130 4720 0.0193 90 3540 0.0172 61 2360 0.0150 35
2.8 5690 0.0226 130 4550 0.0203 90 3410 0.0180 62 2270 0.0158 36
2.9 5490 0.0237 130 4390 0.0213 90 3290 0.0189 62 2200 0.0166 36
3.0 5310 0.0248 130 4250 0.0223 90 3180 0.0198 63 2120 0.0173 37
*if the machine tool or the equipment wouldn’t allow to reach the requested rpm, please use the max. available rpm recalculating the Vf value
(Vf=n available x fn)
Ø RUN OUT
<0.02mm
Material Group
ISO 513 N1 N2 N3 N4 N5
Hardness/Rm
Vc (m/min) 60-80* 60-80* 60-80* 90-110*
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
1.0 22290 0.0062 140 22290 0.0056 120 22290 0.0050 110 31850 0.0068 220
1.1 20270 0.0069 140 20270 0.0062 130 20270 0.0055 110 28950 0.0076 220
1.2 18580 0.0076 140 18580 0.0068 130 18580 0.0061 110 26540 0.0083 220
1.3 17150 0.0083 140 17150 0.0074 130 17150 0.0066 110 24500 0.0091 220
1.4 15920 0.0089 140 15920 0.0080 130 15920 0.0072 110 22750 0.0098 220
1.5 14860 0.0103 150 14860 0.0093 140 14860 0.0083 120 21230 0.0113 240
1.6 13930 0.0117 160 13930 0.0105 150 13930 0.0094 130 19900 0.0129 260
1.7 13110 0.0131 170 13110 0.0118 150 13110 0.0105 140 18730 0.0144 270
1.8 12380 0.0144 180 12380 0.0130 160 12380 0.0116 140 17690 0.0159 280
1.9 11730 0.0158 190 11730 0.0142 170 11730 0.0127 150 16760 0.0174 290
2.0 11150 0.0172 190 11150 0.0155 170 11150 0.0138 150 15920 0.0189 300
2.1 10620 0.0186 200 10620 0.0167 180 10620 0.0149 160 15170 0.0204 310
2.2 10130 0.0199 200 10130 0.0179 180 10130 0.0160 160 14480 0.0219 320
2.3 9690 0.0213 210 9690 0.0192 190 9690 0.0171 170 13850 0.0234 320
2.4 9290 0.0227 210 9290 0.0204 190 9290 0.0182 170 13270 0.0250 330
2.5 8920 0.0241 210 8920 0.0217 190 8920 0.0193 170 12740 0.0265 340
2.6 8570 0.0254 220 8570 0.0229 200 8570 0.0204 170 12250 0.0280 340
2.7 8260 0.0268 220 8260 0.0241 200 8260 0.0215 180 11800 0.0295 350
2.8 7960 0.0282 220 7960 0.0254 200 7960 0.0226 180 11370 0.0310 350
2.9 7690 0.0296 230 7690 0.0266 200 7690 0.0237 180 10980 0.0325 360
3.0 7430 0.0309 230 7430 0.0278 210 7430 0.0248 180 10620 0.0340 360
*if the machine tool or the equipment wouldn’t allow to reach the requested rpm, please use the max. available rpm recalculating the Vf value
(Vf=n available x fn)
TYPHOON - high performance solid carbide drills
163
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
HL
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
SUH MINI
CUTTING PARAMETERS
3530SUH MINI
Ø RUN OUT
<0.02mm
Material Group
ISO 513 S1 S2 S3 S4 S5
Hardness/Rm < 35 HRC 35-45 HRC
Vc (m/min) 10-20* 10-20* 25-35* 10-20*
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
1.0 6370 0.0035 22 4780 0.0024 12 9550 0.0033 31 6370 0.0028 18
1.1 5790 0.0039 22 4340 0.0027 12 8690 0.0037 32 5790 0.0031 18
1.2 5310 0.0042 22 3980 0.0030 12 7960 0.0040 32 5310 0.0034 18
1.3 4900 0.0046 23 3670 0.0032 12 7350 0.0044 32 4900 0.0037 18
1.4 4550 0.0050 23 3410 0.0035 12 6820 0.0048 32 4550 0.0040 18
1.5 4250 0.0058 25 3180 0.0040 13 6370 0.0055 35 4250 0.0046 20
1.6 3980 0.0065 26 2990 0.0046 14 5970 0.0062 37 3980 0.0052 21
1.7 3750 0.0073 27 2810 0.0051 14 5620 0.0069 39 3750 0.0059 22
1.8 3540 0.0081 29 2650 0.0057 15 5310 0.0077 41 3540 0.0065 23
1.9 3350 0.0089 30 2510 0.0062 16 5030 0.0084 42 3350 0.0071 24
2.0 3180 0.0096 31 2390 0.0067 16 4780 0.0091 44 3180 0.0077 24
2.1 3030 0.0104 31 2270 0.0073 17 4550 0.0099 45 3030 0.0083 25
2.2 2900 0.0112 32 2170 0.0078 17 4340 0.0106 46 2900 0.0089 26
2.3 2770 0.0119 33 2080 0.0084 17 4150 0.0113 47 2770 0.0095 26
2.4 2650 0.0127 34 1990 0.0089 18 3980 0.0121 48 2650 0.0102 27
2.5 2550 0.0135 34 1910 0.0094 18 3820 0.0128 49 2550 0.0108 27
2.6 2450 0.0142 35 1840 0.0100 18 3670 0.0135 50 2450 0.0114 28
2.7 2360 0.0150 35 1770 0.0105 19 3540 0.0143 50 2360 0.0120 28
2.8 2270 0.0158 36 1710 0.0110 19 3410 0.0150 51 2270 0.0126 29
2.9 2200 0.0166 36 1650 0.0116 19 3290 0.0157 52 2200 0.0132 29
3.0 2120 0.0173 37 1590 0.0121 19 3180 0.0165 52 2120 0.0139 29
*if the machine tool or the equipment wouldn’t allow to reach the requested rpm, please use the max. available rpm recalculating the Vf value
(Vf=n available x fn)
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
TYPHOON HL
HIGH PERFORMANCE - LONG AND EXTRA-LONG
The Typhoon HL long and extra-long drills are the tool of
choice for deep holes on ISO P, M, K, N, S.
La gamma Typhoon HL di punte lunghe ed extra-lunghe è
progettata per la foratura di materiali ISO P, M, K, N, S.
Die Produktlinie Typhoon HL mit langen und extra-langen
Bohrern wurde für das Bohren der Materialien ISO P, M, K, N,
S entwickelt.
La gamme Typhoon HL de forets longs et extra longs est
conçue pour le perçage de matériaux ISO P, M, K, N, S.
La gama Typhoon HL de brocas largas y extra-largas está
diseñada para el taladro de materiales ISO P, M, K, N, S.
Серия Typhoon HL длинных и супердлинных свёрл
предназначена для сверления отверстий в материалах по
ISO P, M, K, N, S.
166
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
TYPHOON HL HIGH PERFORMANCE - LONG AND EXTRA-LONG
- Suitable for deep and extra-deep drilling
on ISO P, M, K, N, S materials
- Drill geometry: 4 margin lands for accurate
and straight deep holes. Very stable and
reliable even in case of work-pieces with
slant exit holes and cross holes
- Chip pocket: highly polished to prevent
welding and to improve the chip ejection
- Substrate and coating: specifically selected
for high wear resistance, long and reliable
life
- Drilling process: no steps for reliable and
faster process
- Addressable industries: automotive,
hydraulic component, mould and die,
energy, general engineering
- Available from Ø3.1*mm to Ø10mm
- Different cutting length types, from long
(12xD) to extra-long (30xD).
- Forets conçus pour le perçage profond de
matériaux ISO P, M, K, N, S
- Géométrie de l’arête : «4 listels» pour
l’exécution de trous profonds précis
etdroits
- Elle garantit stabilité et fiabilité même en
présence de trous avec sortie inclinée ou de
trous croisés
- Finition des goujoures : polie pour
réduire le problème du collage et faciliter
l’évacuation des copeaux
- Substrat et revêtement : spécifiques pour
garantir durée et fiabilité
- Processus de perçage : le perçage sans
step garantit un processus fiable et rapide
- Secteurs industriels : automotive,
oléohydraulique, moules, énergie,
mécanique générale
- Disponibles du Ø3.1*mm au Ø10 mm
- Différents types de longueur, de la
longueur 12xD aux extra-longues 30xD
- Punte progettate per la foratura profonda
di materiali ISO P, M, K, N, S
- Geometria del tagliente: 4 Margini per
esecuzione di fori profondi precisi e
rettilinei. Garantisce stabilità e affidabilità
anche nel caso di fori con uscita inclinata o
fori intersecanti
- Finitura gole: lappate per ridurre il
problema dell’incollaggio e facilitare
l’evacuazione dei trucioli
- Substrato e rivestimento: specifici per
garantire durata e affidabilità
- Processo di foratura: la foratura senza step
garantisce un processo affidabile e veloce
- Settori industriali: automotive,
oleodinamica, stampi, energia, meccanica
generale
- Disponibili dal Ø3.1*mm fino a Ø10 mm
- Differenti tipi di lunghezza, dalle lunghe
(12xD) alle extra-lunghe (30xD)
- Brocas proyectadas para el taladro
profundo de materiales ISO P, M, K, N, S
- Geometría del filo: 4 Márgenes para
el mecanizado de agujeros profundos,
precisos y rectilíneos. Garantiza estabilidad
y fiabilidad incluso en caso de agujeros con
salida inclinada o agujeros que se cruzan
- Acabado ranuras: lapeadas para reducir
el problema del encolado y facilitar la
evacuación de las virutas
- Sustrato y revestimiento: específicos para
garantizar duración y fiabilidad
- Proceso de taladro: el taladro sin step
garantiza un proceso fiable y rápido
- Sectores industriales: automoción,
oleodinámico, moldes, energía, mecánica
general
- Disponibles de Ø3.1*mm hasta Ø10 mm
- Diferentes tipos de longitud, desde las
largas (12XD) hasta las extra-largas (30XD)
1
2
3
4
* < Ø3.1 = SUH MINI
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
167
TYPHOON HL HIGH PERFORMANCE - LONG AND EXTRA-LONG
- Für das tiefe Bohren der Materialien ISO P,
M, K, N, S entwickelte Bohrer
- Schneidkantengeometrie: 4 Fasen für
die Herstellung von präzisen und geraden
Tiefbohrungen. Zur Gewährleistung von
Stabilität und Zuverlässigkeit, auch bei
Bohrungen mit geneigtem Ausgang oder
sich kreuzenden Bohrungen
- Schlichtbearbeitung der Nuten: geläppt,
um Probleme durch Verkleben zu
reduzieren und um die Späneabführung zu
erleichtern
- Trägermaterial und Beschichtung: speziell
zur Gewährleistung von Standzeit und
Zuverlässigkeit
- Bohrverfahren: das stufenlose Bohren
gewährleistet ein zuverlässiges und rasches
Verfahren
- Industriesektoren: Automobilindustrie,
Ölhydraulik, Formpressen, Energie,
allgemeine Mechanik
- Erhältlich von Ø3.1*mm bis Ø10 mm
- Verschiedene Längen, von lang (12XD) bis
extra-lang (30XD)
- Свёрла предназначены для сверления
глубоких отверстий в материалах по
ISOP, M, K, N, S
- Геометрия с 4 режущими кромками для
выполнения точных и прямолинейных
отверстий. Гарантирует стабильность и
надёжность, даже, в случае обработки
отверстий с выходом в наклонную
плоскость или взаимопересекающихся
отверстий
- Отполированные стружечные канавки:
уменьшают вероятность приваривания
стружки и облегчают ее вывод
- Специальное покрытие для повышения
стойкости инструмента
- Процесс сверления отверстий:
сверление без ступенчатых отходов,
гарантирующее производительность
- Промышленные отрасли:
автомобилестроение, детали
гидравлики, пресс-формы, энергетика,
общее машиностроение
- Доступны диаметром от Ø3.1*мм до
Ø10 мм
- Различные длины: от длинных (12XD) до
супердлинных (30XD)
1
2
3
4
* < Ø3.1 = SUH MINI
168
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
TYPHOON HL HIGH PERFORMANCE - LONG AND EXTRA-LONG
MACHINING OF DEEP HOLES
PERPENDICULAR TO THE SURFACE
ESECUZIONE FORI PROFONDI
ORTOGONALI ALLA SUPERFICIE
HERSTELLUNG TIEFER RECHTWINKLIGER
BOHRUNGEN
EXÉCUTION DE TROUS PROFONDS
ORTHOGONAUX À LA SURFACE
MECANIZADO DE AGUJEROS PROFUNDOS
PERPENDICULARES A LA SUPERFÍCIE
СВЕРЛЕНИЕ ГЛУБОКИХ ОТВЕРСТИЙ ПЕРПЕНДИКУЛЯРНО
ОБРАБАТЫВАЕМОЙ ПОВЕХНОСТИ
STEP 1
As pilot drill (1xD,1.5xD), please use
353HTA or 353HPU with head angle 140°
(HL=135°) and m7 tolerance (HL=h7).
Utiliser un foret 353HTA ou 353HPU avec
un angle en bout de 140° (HL=135°) et une
tolérance m7 (HL=h7), pour effectuer un
trou pilote (1xD÷1.5xD) très précis.
Utilizzare una punta 353HTA o 353HPU
con angolo in testa di 140° (HL=135°) e
tolleranza m7 (HL=h7), per eseguire un foro
pilota (1xD÷1.5xD) molto preciso.
Utilice una broca 353HTA o 353HPU
con ángulo punta de 140° (HL=135°) y
tolerancia m7 (HL=h7), para realizar un
agujero piloto (1xD÷1,5xD) muy preciso.
Einen Bohrer 353HTA oder 353HPU
mit einem Spitzenwinkel von 140°
(HL=135°) und Toleranz m7 (HL=h7) für
die Herstellung einer äußerst präzisen
Richtbohrung (1xD÷1.5xD) verwenden.
Для пилотного отверстия (1xD÷1.5xD)
используйте сверло 353HTA или 353HPU
с углом при вершине 140° (HL=135°) и
допуском на диаметр m7 (HL=h7).
STEP 2
With coolant feed OFF, enter the pilot
hole with HL drill at Vc=20m/min and
fn=0.3mm/rev. Position the HL drill at 1 mm
from the end of the pilot hole, then start
supplying the coolant and start drilling.
Sans actionner la lubrification interne, entrer
avec le foret long série HL à l’intérieur du
trou. Vc=20m/min, fn=0.3mm/rév. Placer
le foret HL jusqu’à 1mm du fond du trou
pilote. Actionner la lubrification interne à
haute pression et commencer le perçage.
Senza azionare il refrigerante interno,
entrare con la punta lunga serie HL
all’interno del foro. Vc=20m/min,
fn=0.3mm/rev. Posizionare la punta HL sino
a 1mm dal fondo del foro pilota. Azionare
il refrigerante interno ad alta pressione e
cominciare la foratura.
Sin accionar el refrigerante interno, entre
con la broca larga de la serie HL dentro del
agujero. Vc=20m/min, fn=0.3mm/rev.
Posicione la punta HL hasta 1 mm del fondo
del agujero piloto. Accione el refrigerante
interno a alta presión y comience el taladro.
Ohne Aktivierung der internen Kühlung,
einen langen Bohrer der Serie HL in
die Bohrung einführen. Vc=20 m/min,
fn=0.3mm/U den Bohrer HL bis 1 mm
vom Ende der Richtbohrung ansetzen. Die
interne Kühlung mit Hochdruck aktivieren
und mit der Bohrung beginnen.
Без включения СОЖ, введите длинное
сверло серии HL внутрь пилотного
отверстия с режимами Vc=20 м/мин и
fn=0.3 мм/об. Спозиционируйте сверло
HL на расстоянии 1 мм от дна отверстия.
Включите подачу СОЖ и начните
сверление.
1D÷1.5D
1.0mm
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
169
TYPHOON HL HIGH PERFORMANCE - LONG AND EXTRA-LONG
STEP 3
Make continue drilling operation without
steps for chip ejection.
In case of through holes, reduce the feed by
30% before the hole exit (approx. 1 mm).
Stop the coolant feed.
Percer sans step pour l'évacuation des
copeaux.
En présence de trous débouchants,
1 mm avant d’avoir terminé le trou,
réduire l’avancement du 30 %. Arrêter la
lubrification.
Forare senza step per scarico trucioli.
Nel caso di fori passanti, 1 mm prima di aver
completato il foro, ridurre l’avanzamento
del 30%.
Fermare il refrigerante.
Taladre sin step para la descarga de virutas.
En el caso de agujeros pasantes, 1 mm
antes de haber completado el agujero,
reduzca el avance un 30%. Pare el
refrigerante.
Für die Späneabführung Stufenlos bohren.
Bei Durchgangsbohrungen 1 mm vor
Fertigstellung der Bohrung den Vorschub
um 30% reduzieren. Die Kühlung
deaktivieren.
Сверлите без остановок и выводов
инструмента.
В случае обработки сквозного отверстия,
снизьте подачу на 30%, за 1 мм до
выхода. Отключите подачу СОЖ.
STEP 4
Withdraw the drill using max rpm and
double fn, until 2xD from the hole entrance.
Retirer le foret en utilisant le maximum
de tours disponibles et le double de
l’avancement conseillé jusqu’à une
profondeur 2xD.
Ritirare la punta utilizzando il massimo dei
giri disponibili e il doppio dell’avanzamento
consigliato sino ad una profondità 2xD.
Retire la broca utilizando el máximo de
rpm disponibles y el doble del avance
aconsejado hasta una profundidad 2xD.
Den Bohrer zurückziehen, dabei die
maximal verfügbare Drehzahl und den
doppelten Wert des empfohlenen
Vorschubs bis zu einer Tiefe 2xD einsetzen.
Выньте сверло до уровня 2хD, используя
максимальную частоту вращения и
двойную подачу.
STEP 5
Completing the exit from the hole by using
slow and constant speed.
Terminer la dernière partie du perçage avec
une vitesse réduite et constante.
Completare l’ultimo tratto di arretramento
con velocità ridotta e costante.
Complete el último tramo de retroceso con
velocidad reducida y constante.
Den letzten Abschnitt beim Zurückziehen
mit reduzierter und konstanter
Geschwindigkeit fertigstellen.
Полностью выньте сверло на заниженных
режимах.
2D÷2.5D
170
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
MACHINING OF DEEP HOLES ON
SLANTED OR IRREGULAR SURFACES
ESECUZIONE FORI PROFONDI SU
SUPERFICI IRREGOLARI O OBLIQUE
HERSTELLUNG TIEFER BOHRUNGEN AUF
SCHRÄGEN ODER UNREGELMÄSSIGEN
OBERFLÄCHEN
EXÉCUTION DE TROUS PROFONDS SUR DES
SURFACES IRRÉGULIÈRES OU OBLIQUES
MECANIZADO DE AGUJEROS
PROFUNDOS SOBRE SUPERFÍCIES
IRREGULARES U OBLICUAS
ОБРАБОТКА ГЛУБОКИХ ОТВЕРСТИЙ
НА НАКЛОННЫХ ИЛИ НЕРОВНЫХ
ПЛОСКОСТЯХ
STEP 1
Prepare a flat surface of the same size as the
drilling diameter.
Réaliser une surface plane en utilisant
une fraise avec une arête frontale. Le plan
réalisé doit avoir les mêmes dimensions que
le diamètre de perçage profond.
Realizzare una superficie piana utilizzando
una fresa con tagliente frontale. Il piano
realizzato deve avere le stesse dimensioni
del diametro di foratura profonda.
Realizar una superficie plana usando una
fresa con filo frontal. El plano realizado tiene
que tener las mismas dimensiones que el
diámetro de taladro profundo.
Eine ebene Oberfläche, durch einen Fräser
mit stirnseitiger Schneidkante, herstellen.
Die hergestellte Oberfläche muss dieselben
Abmessungen des Durchmessers der tiefen
Bohrung aufweisen.
Подготовьте ровную поверхность
с помощью концевой фрезы. Эта
поверхность должна быть того же
размера, что и диаметр будущего
глубокого отверстия.
STEP 2
As pilot drill (1xD,1.5xD), please use
353HTA or 353HPU with head angle 140°
(HL=135°) and m7 tolerance (HL=h7).
Utiliser un foret 353HTA ou 353HPU avec
un angle en bout de 140° (HL=135°) et une
tolérance m7 (HL=h7), pour effectuer un
trou pilote (1xD÷1.5xD) très précis.
Utilizzare una punta 353HTA o 353HPU
con angolo in testa di 140° (HL=135°) e
tolleranza m7 (HL=h7), per eseguire un foro
pilota (1xD÷1.5xD) molto preciso.
Utilice una broca 353HTA o 353HPU
con ángulo punta de 140° (HL=135°) y
tolerancia m7 (HL=h7), para realizar un
agujero piloto (1xD÷1,5xD) muy preciso.
Einen Bohrer 353HTA oder 353HPU
mit einem Spitzenwinkel von 140°
(HL=135°) und Toleranz m7 (HL=h7) für
die Herstellung einer äußerst präzisen
Richtbohrung (1xD÷1.5xD) verwenden.
Для пилотного отверстия (1xD÷1.5xD)
используйте сверло 353HTA или 353HPU
с углом при вершине 140° (HL=135°) и
допуском на диаметр m7 (HL=h7).
1D÷1.5D
TYPHOON HL HIGH PERFORMANCE - LONG AND EXTRA-LONG
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
171
STEP 3
With coolant feed OFF, enter the pilot
holewith HL drill at Vc=20m/min and
fn=0.3mm/rev. Position the HL drill at 1 mm
from the end of the pilot hole, then start
supplying the coolant and start drilling.
Sans actionner la lubrification interne, entrer
avec le foret long série HL à l’intérieur du
trou. Vc=20m/min, fn=0.3mm/rév. Placer
le foret HL jusqu’à 1mm du fond du trou
pilote. Actionner la lubrification interne à
haute pression et commencer le perçage.
Senza azionare il refrigerante interno,
entrare con la punta lunga serie HL
all’interno del foro. Vc=20m/min,
fn=0.3mm/rev. Posizionare la punta HL sino
a 1 mm dal fondo del foro pilota. Azionare
il refrigerante interno ad alta pressione e
cominciare la foratura.
Sin accionar el refrigerante interno, entre
con la broca larga de la serie HL dentro del
agujero. Vc=20m/min, fn=0.3mm/rev.
Posicione la broca HL hasta 1 mm del fondo
del agujero piloto. Accione el refrigerante
interno a alta presión y comience el taladro.
Ohne Aktivierung der internen Kühlung,
einen langen Bohrer der Serie HL in
die Bohrung einführen. Vc=20 m/min,
fn=0.3mm/Umdr. Den Bohrer HL bis 1mm
vom Ende der Richtbohrung ansetzen.
Dieinterne Kühlung mit Hochdruck
aktivieren und mit der Bohrung beginnen.
Без включения СОЖ, введите длинное
сверло серии HL внутрь пилотного
отверстия с режимами Vc=20 м/мин и
fn=0.3 мм/об. Спозиционируйте сверло
HL на расстоянии 1 мм от дна отверстия.
Включите подачу СОЖ и начните
сверление.
STEP 4
Make continue drilling operation without
steps for chip ejection.
In case of through holes, reduce the feed by
30% before the hole exit (approx 1mm).
Stop the coolant feed.
Percer sans step pour l'évacuation des
copeaux.
En présence de trous débouchants,
1 mm avant d’avoir terminé le trou,
réduire l’avancement du 30 %. Arrêter la
lubrification.
Forare senza step per scarico trucioli.
Nel caso di fori passanti, 1mm prima di aver
completato il foro, ridurre l’avanzamento
del 30%
Fermare il refrigerante.
Taladre sin step para la descarga de virutas.
En el caso de agujeros pasantes, 1 mm
antes de haber completado el agujero,
reduzca el avance un 30%.
Pare el refrigerante.
Für die Späneabführung Stufenlos bohren.
Bei Durchgangsbohrungen 1 mm vor
Fertigstellung der Bohrung den Vorschub
um 30% reduzieren.
Die Kühlung deaktivieren.
Сверлите без остановок и выводов
инструмента.
В случае обработки сквозного отверстия,
снизьте подачу на 30%, за 1 мм до
выхода.
Отключите подачу СОЖ.
1.0mm
TYPHOON HL HIGH PERFORMANCE - LONG AND EXTRA-LONG
172
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
TYPHOON HL HIGH PERFORMANCE - LONG AND EXTRA-LONG
STEP 5
Withdraw the drill using max rpm and
double fn, until 2xD÷2.5xD from the hole
entrance.
Retirer le foret en utilisant le maximum
de tours disponibles et le double de
l’avancement conseillé jusqu’à une
profondeur 2xD÷2.5xD.
Ritirare la punta utilizzando il massimo dei
giri disponibili e il doppio dell’avanzamento
consigliato sino ad una profondità
2xD÷2.5xD.
Retire la broca utilizando el máximo de
rpm disponibles y el doble del avance
aconsejado hasta una profundidad de
2xD÷2.5xD.
Den Bohrer zurückziehen, dabei die maximal
verfügbare Drehzahl und den doppelten
Wert des empfohlenen Vorschubs bis zu
einer Tiefe 2xD÷2.5xD einsetzen.
Выньте сверло до уровня 2xD÷2.5xD,
используя максимальную частоту
вращения и двойную подачу.
STEP 6
Completing the exit from the hole by using
slow and constant speed.
Terminer la dernière partie du perçage avec
une vitesse réduite et constante.
Completare l’ultimo tratto di arretramento
con velocità ridotta e costante.
Complete el último tramo de retroceso con
velocidad reducida y constante.
Den letzten Abschnitt beim Zurückziehen
mit reduzierter und konstanter
Geschwindigkeit fertigstellen.
Полностью выньте сверло на заниженных
режимах.
2D÷2.5D
TYPHOON - high performance solid carbide drills
173
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
h stock standard f non-standard stock m stock exhaustion
* Ø1÷Ø3 = 3512 SUH MINI page 148
D(h7) D Tol. d(h6) l l1 L l-4M drilling length EDP No. Stock
3.10* 0/-0.012 4 45 50 85 15.5 12 x D 3512HL0310 h
3.20 0/-0.012 4 45 50 85 16 12 x D 3512HL0320 h
3.30 0/-0.012 4 45 50 85 16.5 12 x D 3512HL0330 h
3.40 0/-0.012 4 48 54 90 17 12 x D 3512HL0340 f
3.50 0/-0.012 4 48 54 90 17.5 12 x D 3512HL0350 h
3.60 0/-0.012 4 48 54 90 18 12 x D 3512HL0360 f
3.70 0/-0.012 4 48 54 90 18.5 12 x D 3512HL0370 h
3.80 0/-0.012 4 57 64 100 19 12 x D 3512HL0380 h
3.90 0/-0.012 4 57 64 100 19.5 12 x D 3512HL0390 f
4.00 0/-0.012 4 57 64 100 20 12 x D 3512HL0400 h
4.10 0/-0.012 5 57 64 100 20.5 12 x D 3512HL0410 h
4.20 0/-0.012 5 57 64 100 21 12 x D 3512HL0420 h
4.30 0/-0.012 5 57 64 100 21.5 12 x D 3512HL0430 h
4.40 0/-0.012 5 57 64 100 22 12 x D 3512HL0440 f
4.50 0/-0.012 5 57 64 100 22.5 12 x D 3512HL0450 h
4.60 0/-0.012 5 57 64 100 23 12 x D 3512HL0460 f
4.70 0/-0.012 5 57 64 100 23.5 12 x D 3512HL0470 f
4.80 0/-0.012 5 67 74 110 24 12 x D 3512HL0480 h
4.90 0/-0.012 5 72 81 120 24.5 12 x D 3512HL0490 f
5.00 0/-0.012 5 72 81 120 25 12 x D 3512HL0500 h
5.10 0/-0.012 6 72 81 120 25.5 12 x D 3512HL0510 h
5.20 0/-0.012 6 72 81 120 26 12 x D 3512HL0520 h
5.30 0/-0.012 6 72 81 120 26.5 12 x D 3512HL0530 h
5.40 0/-0.012 6 72 81 120 27 12 x D 3512HL0540 f
5.50 0/-0.012 6 72 81 120 27.5 12 x D 3512HL0550 h
5.60 0/-0.012 6 72 81 120 28 12 x D 3512HL0560 h
5.70 0/-0.012 6 72 81 120 28.5 12 x D 3512HL0570 f
5.80 0/-0.012 6 72 81 120 29 12 x D 3512HL0580 h
5.90 0/-0.012 6 72 81 120 29.5 12 x D 3512HL0590 f
6.00 0/-0.012 6 72 81 120 30 12 x D 3512HL0600 h
6.10 0/-0.015 8 88 97 135 30.5 12 x D 3512HL0610 h
6.20 0/-0.015 8 88 97 135 31 12 x D 3512HL0620 h
6.30 0/-0.015 8 88 97 135 31.5 12 x D 3512HL0630 h
6.40 0/-0.015 8 96 108 145 32 12 x D 3512HL0640 f
6.50 0/-0.015 8 96 108 145 32.5 12 x D 3512HL0650 h
6.60 0/-0.015 8 96 108 145 33 12 x D 3512HL0660 f
6.70 0/-0.015 8 96 108 145 33.5 12 x D 3512HL0670 h
6.80 0/-0.015 8 96 108 145 34 12 x D 3512HL0680 h
6.90 0/-0.015 8 96 108 145 34.5 12 x D 3512HL0690 h
3512HL
4-margin lands, long (12xD), polished flutes,
HL (through coolant)
12XD OSAWA
NORM 135°
PMKNSH
+++,,
+ 1st choice , suitable
TYPHOON - high performance solid carbide drills
174
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
3512HL
4-margin lands, long (12xD), polished flutes,
HL (through coolant)
12XD OSAWA
NORM 135°
PMKNSH
+++,,
+ 1st choice , suitable
h stock standard f non-standard stock m stock exhaustion
D(h7) D Tol. d(h6) l l1 L l-4M drilling length EDP No. Stock
7.00 0/-0.015 8 96 108 145 35 12 x D 3512HL0700 h
7.10 0/-0.015 8 96 108 145 35.5 12 x D 3512HL0710 h
7.20 0/-0.015 8 96 108 145 36 12 x D 3512HL0720 h
7.30 0/-0.015 8 96 108 145 36.5 12 x D 3512HL0730 f
7.40 0/-0.015 8 96 108 145 37 12 x D 3512HL0740 f
7.50 0/-0.015 8 96 108 145 37.5 12 x D 3512HL0750 h
7.60 0/-0.015 8 96 108 145 38 12 x D 3512HL0760 f
7.70 0/-0.015 8 96 108 145 38.5 12 x D 3512HL0770 f
7.80 0/-0.015 8 96 108 145 39 12 x D 3512HL0780 h
7.90 0/-0.015 8 96 108 145 39.5 12 x D 3512HL0790 f
8.00 0/-0.015 8 96 108 145 40 12 x D 3512HL0800 h
8.10 0/-0.015 10 115 127 170 40.5 12 x D 3512HL0810 h
8.20 0/-0.015 10 120 135 180 41 12 x D 3512HL0820 h
8.30 0/-0.015 10 120 135 180 41.5 12 x D 3512HL0830 h
8.40 0/-0.015 10 120 135 180 42 12 x D 3512HL0840 f
8.50 0/-0.015 10 120 135 180 42.5 12 x D 3512HL0850 h
8.60 0/-0.015 10 120 135 180 43 12 x D 3512HL0860 h
8.70 0/-0.015 10 120 135 180 43.5 12 x D 3512HL0870 h
8.80 0/-0.015 10 120 135 180 44 12 x D 3512HL0880 h
8.90 0/-0.015 10 120 135 180 44.5 12 x D 3512HL0890 f
9.00 0/-0.015 10 120 135 180 45 12 x D 3512HL0900 h
9.10 0/-0.015 10 120 135 180 45.5 12 x D 3512HL0910 h
9.20 0/-0.015 10 120 135 180 46 12 x D 3512HL0920 h
9.30 0/-0.015 10 120 135 180 46.5 12 x D 3512HL0930 h
9.40 0/-0.015 10 120 135 180 47 12 x D 3512HL0940 f
9.50 0/-0.015 10 120 135 180 47.5 12 x D 3512HL0950 h
9.60 0/-0.015 10 120 135 180 48 12 x D 3512HL0960 f
9.70 0/-0.015 10 120 135 180 48.5 12 x D 3512HL0970 f
9.80 0/-0.015 10 120 135 180 49 12 x D 3512HL0980 h
9.90 0/-0.015 10 120 135 180 49.5 12 x D 3512HL0990 f
10.00 0/-0.015 10 120 135 180 50 12 x D 3512HL1000 h
TYPHOON - high performance solid carbide drills
175
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
CUTTING PARAMETERS
3512HL
Ø RUN OUT
<0.02mm
Material Group
ISO 513 P1 P2 P3 P4 P5 P6
Hardness/Rm 500-700 N/mm² 600-1000 N/mm² 900-1200 N/mm² 1200-1400 N/mm²
Vc (m/min) 70-90 60-80 50-70 40-60
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
3.0 8490 0.065 550 7430 0.059 430 6370 0.052 330 5310 0.046 240
3.5 7280 0.075 550 6369 0.068 430 5460 0.060 330 4550 0.053 240
4.0 6370 0.090 570 5573 0.081 450 4780 0.072 340 3980 0.063 250
4.5 5660 0.105 590 4954 0.095 470 4250 0.084 360 3540 0.074 260
5.0 5100 0.120 610 4459 0.108 480 3820 0.096 370 3180 0.084 270
5.5 4630 0.135 630 4053 0.122 490 3470 0.108 370 2900 0.095 270
6.0 4250 0.150 640 3715 0.135 500 3180 0.120 380 2650 0.105 280
6.5 3920 0.165 650 3430 0.149 510 2940 0.132 390 2450 0.116 280
7.0 3640 0.180 660 3185 0.162 520 2730 0.144 390 2270 0.126 290
7.5 3400 0.195 660 2972 0.176 520 2550 0.156 400 2120 0.137 290
8.0 3180 0.210 670 2787 0.189 530 2390 0.168 400 1990 0.147 290
8.5 3000 0.225 680 2623 0.203 530 2250 0.180 410 1870 0.158 290
9.0 2830 0.240 680 2477 0.216 540 2120 0.192 410 1770 0.168 300
9.5 2680 0.255 680 2347 0.230 540 2010 0.204 410 1680 0.179 300
10.0 2550 0.270 690 2229 0.243 540 1910 0.216 410 1590 0.189 300
Ø RUN OUT
<0.02mm
Material Group
ISO 513 M1 M2 M3 M4 M5
Hardness/Rm < 750 N/mm² 550-850 N/mm² 650-950 N/mm² 850-1200 N/mm²
Vc (m/min) 45-55 30-50 30-40 25-35
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
3.0 5310 0.049 260 4250 0.041 180 3720 0.034 130 3180 0.029 90
3.5 4550 0.056 260 3640 0.048 170 3180 0.039 130 2730 0.034 90
4.0 3980 0.068 270 3180 0.057 180 2790 0.047 130 2390 0.041 100
4.5 3540 0.079 280 2830 0.067 190 2480 0.055 140 2120 0.047 100
5.0 3180 0.090 290 2550 0.077 200 2230 0.063 140 1910 0.054 100
5.5 2900 0.101 290 2320 0.086 200 2030 0.071 140 1740 0.061 110
6.0 2650 0.113 300 2120 0.096 200 1860 0.079 150 1590 0.068 110
6.5 2450 0.124 300 1960 0.105 210 1710 0.087 150 1470 0.074 110
7.0 2270 0.135 310 1820 0.115 210 1590 0.095 150 1360 0.081 110
7.5 2120 0.146 310 1700 0.124 210 1490 0.102 150 1270 0.088 110
8.0 1990 0.158 310 1590 0.134 210 1390 0.110 150 1190 0.095 110
8.5 1870 0.169 320 1500 0.143 220 1310 0.118 150 1120 0.101 110
9.0 1770 0.180 320 1420 0.153 220 1240 0.126 160 1060 0.108 110
9.5 1680 0.191 320 1340 0.163 220 1170 0.134 160 1010 0.115 120
10.0 1590 0.203 320 1270 0.172 220 1110 0.142 160 960 0.122 120
TYPHOON - high performance solid carbide drills
176
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
CUTTING PARAMETERS
3512HL
Ø RUN OUT
<0.02mm
Material Group
ISO 513 K1 K2 K3 K4
Hardness/Rm 150-250 HB 150-350 HB 120-260 HB 250-500 HB
Vc (m/min) 70-90 60-80 50-70 40-60
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
3.0 8490 0.065 550 7430 0.059 430 6370 0.052 330 5310 0.046 240
3.5 7280 0.075 550 6370 0.068 430 5460 0.060 330 4550 0.053 240
4.0 6370 0.090 570 5570 0.081 450 4780 0.072 340 3980 0.063 250
4.5 5660 0.105 590 4950 0.095 470 4250 0.084 360 3540 0.074 260
5.0 5100 0.120 610 4460 0.108 480 3820 0.096 370 3180 0.084 270
5.5 4630 0.135 630 4050 0.122 490 3470 0.108 370 2900 0.095 270
6.0 4250 0.150 640 3720 0.135 500 3180 0.120 380 2650 0.105 280
6.5 3920 0.165 650 3430 0.149 510 2940 0.132 390 2450 0.116 280
7.0 3640 0.180 660 3180 0.162 520 2730 0.144 390 2270 0.126 290
7.5 3400 0.195 660 2970 0.176 520 2550 0.156 400 2120 0.137 290
8.0 3180 0.210 670 2790 0.189 530 2390 0.168 400 1990 0.147 290
8.5 3000 0.225 680 2620 0.203 530 2250 0.180 410 1870 0.158 290
9.0 2830 0.240 680 2480 0.216 540 2120 0.192 410 1770 0.168 300
9.5 2680 0.255 680 2350 0.230 540 2010 0.204 410 1680 0.179 300
10.0 2550 0.270 690 2230 0.243 540 1910 0.216 410 1590 0.189 300
Ø RUN OUT
<0.02mm
Material Group
ISO 513 N1 N2 N3 N4
Hardness/Rm
Vc (m/min) 70-90 60-80 60-80
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
3.0 8490 0.081 690 7430 0.073 540 7430 0.065 480
3.5 7280 0.094 680 6370 0.084 540 6370 0.075 480
4.0 6370 0.113 720 5570 0.101 560 5570 0.090 500
4.5 5660 0.131 740 4950 0.118 580 4950 0.105 520
5.0 5100 0.150 770 4460 0.135 600 4460 0.120 540
5.5 4630 0.169 780 4050 0.152 620 4050 0.135 550
6.0 4250 0.188 800 3720 0.169 630 3720 0.150 560
6.5 3920 0.206 810 3430 0.186 640 3430 0.165 570
7.0 3640 0.225 820 3180 0.203 640 3180 0.180 570
7.5 3400 0.244 830 2970 0.219 650 2970 0.195 580
8.0 3180 0.263 830 2790 0.236 660 2790 0.210 590
8.5 3000 0.281 840 2620 0.253 660 2620 0.225 590
9.0 2830 0.300 850 2480 0.270 670 2480 0.240 600
9.5 2680 0.319 850 2350 0.287 670 2350 0.255 600
10.0 2550 0.338 860 2230 0.304 680 2230 0.270 600
TYPHOON - high performance solid carbide drills
177
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
CUTTING PARAMETERS
3512HL
Ø RUN OUT
<0.02mm
Material Group
ISO 513 S1 S2 S3 S4 S5
Hardness/Rm < 35 HRC 35-45 HRC
Vc (m/min) 30-40 20-30 30-40 20-30
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
3.0 3720 0.046 170 2650 0.032 80 3720 0.043 160 2650 0.036 100
3.5 3180 0.053 170 2270 0.037 80 3180 0.050 160 2270 0.042 100
4.0 2790 0.063 180 1990 0.044 90 2790 0.060 170 1990 0.050 100
4.5 2480 0.074 180 1770 0.051 90 2480 0.070 170 1770 0.059 100
5.0 2230 0.084 190 1590 0.059 90 2230 0.080 180 1590 0.067 110
5.5 2030 0.095 190 1450 0.066 100 2030 0.090 180 1450 0.076 110
6.0 1860 0.105 200 1330 0.074 100 1860 0.100 190 1330 0.084 110
6.5 1710 0.116 200 1220 0.081 100 1710 0.110 190 1220 0.092 110
7.0 1590 0.126 200 1140 0.088 100 1590 0.120 190 1140 0.101 110
7.5 1490 0.137 200 1060 0.096 100 1490 0.130 190 1060 0.109 120
8.0 1390 0.147 200 1000 0.103 100 1390 0.140 190 1000 0.118 120
8.5 1310 0.158 210 940 0.110 100 1310 0.150 200 940 0.126 120
9.0 1240 0.168 210 880 0.118 100 1240 0.160 200 880 0.134 120
9.5 1170 0.179 210 840 0.125 100 1170 0.170 200 840 0.143 120
10.0 1110 0.189 210 800 0.132 110 1110 0.180 200 800 0.151 120
TYPHOON - high performance solid carbide drills
178
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
h stock standard f non-standard stock m stock exhaustion
D(h7) D Tol. d(h6) l l1 L l-4M drilling length EDP No. Stock
3.10 0/-0.012 4 50 55 90 15.5 15 x D 3515HL0310 f
3.20 0/-0.012 4 50 55 90 16 15 x D 3515HL0320 f
3.30 0/-0.012 4 52 56 90 16.5 15 x D 3515HL0330 f
3.40 0/-0.012 4 53 58 95 17 15 x D 3515HL0340 f
3.50 0/-0.012 4 55 60 95 17.5 15 x D 3515HL0350 h
3.60 0/-0.012 4 56 61 95 18 15 x D 3515HL0360 f
3.70 0/-0.012 4 58 63 100 18.5 15 x D 3515HL0370 f
3.80 0/-0.012 4 60 65 100 19 15 x D 3515HL0380 f
3.90 0/-0.012 4 60 66 100 19.5 15 x D 3515HL0390 f
4.00 0/-0.012 4 62 68 105 20 15 x D 3515HL0400 h
4.10 0/-0.012 5 64 70 105 20.5 15 x D 3515HL0410 f
4.20 0/-0.012 5 65 71 110 21 15 x D 3515HL0420 f
4.30 0/-0.012 5 67 73 110 21.5 15 x D 3515HL0430 f
4.40 0/-0.012 5 68 75 110 22 15 x D 3515HL0440 f
4.50 0/-0.012 5 70 76 115 22.5 15 x D 3515HL0450 h
4.60 0/-0.012 5 71 78 115 23 15 x D 3515HL0460 f
4.70 0/-0.012 5 73 80 115 23.5 15 x D 3515HL0470 f
4.80 0/-0.012 5 75 82 115 24 15 x D 3515HL0480 f
4.90 0/-0.012 5 76 83 120 24.5 15 x D 3515HL0490 f
5.00 0/-0.012 5 77 85 120 25 15 x D 3515HL0500 h
5.10 0/-0.012 6 79 86 125 25.5 15 x D 3515HL0510 f
5.20 0/-0.012 6 80 88 125 26 15 x D 3515HL0520 f
5.30 0/-0.012 6 82 89 130 26.5 15 x D 3515HL0530 f
5.40 0/-0.012 6 83 91 130 27 15 x D 3515HL0540 f
5.50 0/-0.012 6 85 93 130 27.5 15 x D 3515HL0550 h
5.60 0/-0.012 6 86 94 135 28 15 x D 3515HL0560 f
5.70 0/-0.012 6 88 96 135 28.5 15 x D 3515HL0570 f
5.80 0/-0.012 6 89 98 135 29 15 x D 3515HL0580 f
5.90 0/-0.012 6 91 99 140 29.5 15 x D 3515HL0590 f
6.00 0/-0.012 6 92 101 140 30 15 x D 3515HL0600 h
6.10 0/-0.015 8 94 103 140 30.5 15 x D 3515HL0610 f
6.20 0/-0.015 8 95 104 140 31 15 x D 3515HL0620 f
6.30 0/-0.015 8 98 108 145 31.5 15 x D 3515HL0630 f
6.40 0/-0.015 8 100 110 145 32 15 x D 3515HL0640 f
6.50 0/-0.015 8 100 110 150 32.5 15 x D 3515HL0650 h
6.60 0/-0.015 8 101 111 150 33 15 x D 3515HL0660 f
6.70 0/-0.015 8 103 113 150 33.5 15 x D 3515HL0670 f
6.80 0/-0.015 8 104 114 155 34 15 x D 3515HL0680 f
6.90 0/-0.015 8 106 116 155 34.5 15 x D 3515HL0690 f
3515HL
4-margin lands, long (15xD), polished flutes,
HL (through coolant)
15XD OSAWA
NORM 135°
PMKNSH
+++,,
+ 1st choice , suitable
TYPHOON - high performance solid carbide drills
179
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
h stock standard f non-standard stock m stock exhaustion
D(h7) D Tol. d(h6) l l1 L l-4M drilling length EDP No. Stock
7.00 0/-0.015 8 107 118 160 35 15 x D 3515HL0700 h
7.10 0/-0.015 8 109 119 160 35.5 15 x D 3515HL0710 f
7.20 0/-0.015 8 110 121 160 36 15 x D 3515HL0720 f
7.30 0/-0.015 8 112 122 165 36.5 15 x D 3515HL0730 f
7.40 0/-0.015 8 113 124 165 37 15 x D 3515HL0740 f
7.50 0/-0.015 8 115 126 165 37.5 15 x D 3515HL0750 h
7.60 0/-0.015 8 116 127 170 38 15 x D 3515HL0760 f
7.70 0/-0.015 8 118 129 170 38.5 15 x D 3515HL0770 f
7.80 0/-0.015 8 119 131 170 39 15 x D 3515HL0780 f
7.90 0/-0.015 8 121 132 175 39.5 15 x D 3515HL0790 f
8.00 0/-0.015 8 122 134 175 40 15 x D 3515HL0800 h
8.10 0/-0.015 10 125 137 180 40.5 15 x D 3515HL0810 f
8.20 0/-0.015 10 125 137 180 41 15 x D 3515HL0820 f
8.30 0/-0.015 10 127 139 180 41.5 15 x D 3515HL0830 f
8.40 0/-0.015 10 128 141 185 42 15 x D 3515HL0840 f
8.50 0/-0.015 10 130 142 185 42.5 15 x D 3515HL0850 h
8.60 0/-0.015 10 131 144 185 43 15 x D 3515HL0860 f
8.70 0/-0.015 10 133 146 190 43.5 15 x D 3515HL0870 f
8.80 0/-0.015 10 134 147 190 44 15 x D 3515HL0880 f
8.90 0/-0.015 10 136 149 190 44.5 15 x D 3515HL0890 f
9.00 0/-0.015 10 137 151 195 45 15 x D 3515HL0900 h
9.10 0/-0.015 10 139 152 195 45.5 15 x D 3515HL0910 f
9.20 0/-0.015 10 140 154 195 46 15 x D 3515HL0920 f
9.30 0/-0.015 10 142 155 200 46.5 15 x D 3515HL0930 f
9.40 0/-0.015 10 143 157 200 47 15 x D 3515HL0940 f
9.50 0/-0.015 10 145 159 200 47.5 15 x D 3515HL0950 h
9.60 0/-0.015 10 146 160 205 48 15 x D 3515HL0960 f
9.70 0/-0.015 10 148 162 205 48.5 15 x D 3515HL0970 f
9.80 0/-0.015 10 149 164 205 49 15 x D 3515HL0980 f
9.90 0/-0.015 10 151 165 210 49.5 15 x D 3515HL0990 f
10.00 0/-0.015 10 152 167 210 50 15 x D 3515HL1000 h
3515HL
4-margin lands, long (15xD), polished flutes,
HL (through coolant)
15XD OSAWA
NORM 135°
PMKNSH
+++,,
+ 1st choice , suitable
TYPHOON - high performance solid carbide drills
180
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
CUTTING PARAMETERS
3515HL
Ø RUN OUT
<0.02mm
Material Group
ISO 513 P1 P2 P3 P4 P5 P6
Hardness/Rm 500-700 N/mm² 600-1000 N/mm² 900-1200 N/mm² 1200-1400 N/mm²
Vc (m/min) 70-90 60-80 50-70 40-60
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
3.0 8490 0.062 520 7430 0.056 410 6370 0.049 310 5310 0.043 230
3.5 7280 0.071 520 6370 0.064 410 5460 0.057 310 4550 0.050 230
4.0 6370 0.086 540 5570 0.077 430 4780 0.068 330 3980 0.060 240
4.5 5660 0.100 560 4950 0.090 440 4250 0.080 340 3540 0.070 250
5.0 5100 0.114 580 4460 0.103 460 3820 0.091 350 3180 0.080 250
5.5 4630 0.128 590 4050 0.115 470 3470 0.103 360 2900 0.090 260
6.0 4250 0.143 610 3720 0.128 480 3180 0.114 360 2650 0.100 260
6.5 3920 0.157 610 3430 0.141 480 2940 0.125 370 2450 0.110 270
7.0 3640 0.171 620 3180 0.154 490 2730 0.137 370 2270 0.120 270
7.5 3400 0.185 630 2970 0.167 500 2550 0.148 380 2120 0.130 270
8.0 3180 0.200 630 2790 0.180 500 2390 0.160 380 1990 0.140 280
8.5 3000 0.214 640 2620 0.192 500 2250 0.171 380 1870 0.150 280
9.0 2830 0.228 650 2480 0.205 510 2120 0.182 390 1770 0.160 280
9.5 2680 0.242 650 2350 0.218 510 2010 0.194 390 1680 0.170 280
10.0 2550 0.257 650 2230 0.231 510 1910 0.205 390 1590 0.180 290
Ø RUN OUT
<0.02mm
Material Group
ISO 513 M1 M2 M3 M4 M5
Hardness/Rm < 750 N/mm² 550-850 N/mm² 650-950 N/mm² 850-1200 N/mm²
Vc (m/min) 45-55 30-50 30-40 25-35
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
3.0 5310 0.046 250 4250 0.039 170 3720 0.032 120 3180 0.028 90
3.5 4550 0.053 240 3640 0.045 170 3180 0.037 120 2730 0.032 90
4.0 3980 0.064 260 3180 0.055 170 2790 0.045 130 2390 0.038 90
4.5 3540 0.075 260 2830 0.064 180 2480 0.052 130 2120 0.045 100
5.0 3180 0.086 270 2550 0.073 190 2230 0.060 130 1910 0.051 100
5.5 2900 0.096 280 2320 0.082 190 2030 0.067 140 1740 0.058 100
6.0 2650 0.107 280 2120 0.091 190 1860 0.075 140 1590 0.064 100
6.5 2450 0.118 290 1960 0.100 200 1710 0.082 140 1470 0.071 100
7.0 2270 0.128 290 1820 0.109 200 1590 0.090 140 1360 0.077 100
7.5 2120 0.139 290 1700 0.118 200 1490 0.097 140 1270 0.083 110
8.0 1990 0.150 300 1590 0.127 200 1390 0.105 150 1190 0.090 110
8.5 1870 0.160 300 1500 0.136 200 1310 0.112 150 1120 0.096 110
9.0 1770 0.171 300 1420 0.145 210 1240 0.120 150 1060 0.103 110
9.5 1680 0.182 310 1340 0.154 210 1170 0.127 150 1010 0.109 110
10.0 1590 0.192 310 1270 0.164 210 1110 0.135 150 960 0.115 110
TYPHOON - high performance solid carbide drills
181
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
CUTTING PARAMETERS
3515HL
Ø RUN OUT
<0.02mm
Material Group
ISO 513 K1 K2 K3 K4
Hardness/Rm 150-250 HB 150-350 HB 120-260 HB 250-500 HB
Vc (m/min) 70-90 60-80 50-70 40-60
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
3.0 8490 0.062 520 7430 0.056 410 6370 0.049 310 5310 0.043 230
3.5 7280 0.071 520 6370 0.064 410 5460 0.057 310 4550 0.050 230
4.0 6370 0.086 540 5570 0.077 430 4780 0.068 330 3980 0.060 240
4.5 5660 0.100 560 4950 0.090 440 4250 0.080 340 3540 0.070 250
5.0 5100 0.114 580 4460 0.103 460 3820 0.091 350 3180 0.080 250
5.5 4630 0.128 590 4050 0.115 470 3470 0.103 360 2900 0.090 260
6.0 4250 0.143 610 3720 0.128 480 3180 0.114 360 2650 0.100 260
6.5 3920 0.157 610 3430 0.141 480 2940 0.125 370 2450 0.110 270
7.0 3640 0.171 620 3180 0.154 490 2730 0.137 370 2270 0.120 270
7.5 3400 0.185 630 2970 0.167 500 2550 0.148 380 2120 0.130 270
8.0 3180 0.200 630 2790 0.180 500 2390 0.160 380 1990 0.140 280
8.5 3000 0.214 640 2620 0.192 500 2250 0.171 380 1870 0.150 280
9.0 2830 0.228 650 2480 0.205 510 2120 0.182 390 1770 0.160 280
9.5 2680 0.242 650 2350 0.218 510 2010 0.194 390 1680 0.170 280
10.0 2550 0.257 650 2230 0.231 510 1910 0.205 390 1590 0.180 290
Ø RUN OUT
<0.02mm
Material Group
ISO 513 N1 N2 N3 N4
Hardness/Rm
Vc (m/min) 70-90 60-80 60-80
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
3.0 8490 0.077 660 7430 0.069 520 7430 0.062 460
3.5 7280 0.089 650 6370 0.080 510 6370 0.071 450
4.0 6370 0.107 680 5570 0.096 540 5570 0.086 480
4.5 5660 0.125 710 4950 0.112 560 4950 0.100 490
5.0 5100 0.143 730 4460 0.128 570 4460 0.114 510
5.5 4630 0.160 740 4050 0.144 580 4050 0.128 520
6.0 4250 0.178 760 3720 0.160 600 3720 0.143 530
6.5 3920 0.196 770 3430 0.176 600 3430 0.157 540
7.0 3640 0.214 780 3180 0.192 610 3180 0.171 540
7.5 3400 0.232 790 2970 0.208 620 2970 0.185 550
8.0 3180 0.249 790 2790 0.224 630 2790 0.200 560
8.5 3000 0.267 800 2620 0.240 630 2620 0.214 560
9.0 2830 0.285 810 2480 0.257 640 2480 0.228 570
9.5 2680 0.303 810 2350 0.273 640 2350 0.242 570
10.0 2550 0.321 820 2230 0.289 640 2230 0.257 570
TYPHOON - high performance solid carbide drills
182
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
CUTTING PARAMETERS
3515HL
Ø RUN OUT
<0.02mm
Material Group
ISO 513 S1 S2 S3 S4 S5
Hardness/Rm < 35 HRC 35-45 HRC
Vc (m/min) 30-40 20-30 30-40 20-30
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
3.0 3720 0.043 160 2650 0.030 80 3720 0.041 150 2650 0.035 90
3.5 3180 0.050 160 2270 0.035 80 3180 0.047 150 2270 0.040 90
4.0 2790 0.060 170 1990 0.042 80 2790 0.057 160 1990 0.048 100
4.5 2480 0.070 170 1770 0.049 90 2480 0.066 160 1770 0.056 100
5.0 2230 0.080 180 1590 0.056 90 2230 0.076 170 1590 0.064 100
5.5 2030 0.090 180 1450 0.063 90 2030 0.085 170 1450 0.072 100
6.0 1860 0.100 190 1330 0.070 90 1860 0.095 180 1330 0.080 110
6.5 1710 0.110 190 1220 0.077 90 1710 0.104 180 1220 0.088 110
7.0 1590 0.120 190 1140 0.084 100 1590 0.114 180 1140 0.096 110
7.5 1490 0.130 190 1060 0.091 100 1490 0.123 180 1060 0.104 110
8.0 1390 0.140 190 1000 0.098 100 1390 0.133 180 1000 0.112 110
8.5 1310 0.150 200 940 0.105 100 1310 0.142 190 940 0.120 110
9.0 1240 0.160 200 880 0.112 100 1240 0.152 190 880 0.128 110
9.5 1170 0.170 200 840 0.119 100 1170 0.161 190 840 0.136 110
10.0 1110 0.180 200 800 0.126 100 1110 0.171 190 800 0.144 110
TYPHOON - high performance solid carbide drills
183
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
h stock standard f non-standard stock m stock exhaustion
D(h7) D Tol. d(h6) l l1 L l-4M drilling length EDP No. Stock
3.10* 0/-0.012 4 64 69 105 15.5 20 x D 3520HL0310 f
3.20 0/-0.012 4 66 71 105 16 20 x D 3520HL0320 h
3.30 0/-0.012 4 68 73 110 16.5 20 x D 3520HL0330 h
3.40 0/-0.012 4 70 75 110 17 20 x D 3520HL0340 f
3.50 0/-0.012 4 72 77 110 17.5 20 x D 3520HL0350 h
3.60 0/-0.012 4 74 79 115 18 20 x D 3520HL0360 f
3.70 0/-0.012 4 76 82 115 18.5 20 x D 3520HL0370 f
3.80 0/-0.012 4 78 84 120 19 20 x D 3520HL0380 h
3.90 0/-0.012 4 80 86 120 19.5 20 x D 3520HL0390 f
4.00 0/-0.012 4 82 88 125 20 20 x D 3520HL0400 h
4.10 0/-0.012 5 84 90 125 20.5 20 x D 3520HL0410 f
4.20 0/-0.012 5 86 92 130 21 20 x D 3520HL0420 h
4.30 0/-0.012 5 88 94 130 21.5 20 x D 3520HL0430 f
4.40 0/-0.012 5 90 97 135 22 20 x D 3520HL0440 f
4.50 0/-0.012 5 92 99 135 22.5 20 x D 3520HL0450 h
4.60 0/-0.012 5 94 101 140 23 20 x D 3520HL0460 f
4.70 0/-0.012 5 96 103 140 23.5 20 x D 3520HL0470 f
4.80 0/-0.012 5 98 105 140 24 20 x D 3520HL0480 h
4.90 0/-0.012 5 100 107 145 24.5 20 x D 3520HL0490 f
5.00 0/-0.012 5 102 110 145 25 20 x D 3520HL0500 h
5.10 0/-0.012 6 104 112 150 25.5 20 x D 3520HL0510 f
5.20 0/-0.012 6 106 114 155 26 20 x D 3520HL0520 f
5.30 0/-0.012 6 108 116 155 26.5 20 x D 3520HL0530 f
5.40 0/-0.012 6 110 118 155 27 20 x D 3520HL0540 f
5.50 0/-0.012 6 112 120 160 27.5 20 x D 3520HL0550 h
5.60 0/-0.012 6 114 122 160 28 20 x D 3520HL0560 f
5.70 0/-0.012 6 116 125 165 28.5 20 x D 3520HL0570 f
5.80 0/-0.012 6 118 127 165 29 20 x D 3520HL0580 h
5.90 0/-0.012 6 120 129 170 29.5 20 x D 3520HL0590 f
6.00 0/-0.012 6 122 131 170 30 20 x D 3520HL0600 h
6.10 0/-0.015 8 124 133 170 30.5 20 x D 3520HL0610 f
6.20 0/-0.015 8 126 135 175 31 20 x D 3520HL0620 f
6.30 0/-0.015 8 128 137 175 31.5 20 x D 3520HL0630 f
6.40 0/-0.015 8 130 140 180 32 20 x D 3520HL0640 f
6.50 0/-0.015 8 132 142 180 32.5 20 x D 3520HL0650 h
6.60 0/-0.015 8 134 144 185 33 20 x D 3520HL0660 f
6.70 0/-0.015 8 136 146 185 33.5 20 x D 3520HL0670 f
6.80 0/-0.015 8 138 148 185 34 20 x D 3520HL0680 h
6.90 0/-0.015 8 140 150 190 34.5 20 x D 3520HL0690 f
3520HL
4-margin lands, long (20xD), polished flutes,
HL (through coolant)
20XD OSAWA
NORM 135°
PMKNSH
+++,,
+ 1st choice , suitable
* Ø1÷Ø3 = 3520 SUH MINI page 152
TYPHOON - high performance solid carbide drills
184
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
h stock standard f non-standard stock m stock exhaustion
D(h7) D Tol. d(h6) l l1 L l-4M drilling length EDP No. Stock
7.00 0/-0.015 8 142 153 195 35 20 x D 3520HL0700 h
7.10 0/-0.015 8 144 155 195 35.5 20 x D 3520HL0710 f
7.20 0/-0.015 8 146 157 200 36 20 x D 3520HL0720 f
7.30 0/-0.015 8 148 159 200 36.5 20 x D 3520HL0730 f
7.40 0/-0.015 8 150 161 200 37 20 x D 3520HL0740 f
7.50 0/-0.015 8 152 163 205 37.5 20 x D 3520HL0750 h
7.60 0/-0.015 8 154 165 205 38 20 x D 3520HL0760 f
7.70 0/-0.015 8 156 168 210 38.5 20 x D 3520HL0770 f
7.80 0/-0.015 8 158 170 210 39 20 x D 3520HL0780 f
7.90 0/-0.015 8 160 172 215 39.5 20 x D 3520HL0790 f
8.00 0/-0.015 8 162 174 215 40 20 x D 3520HL0800 h
8.10 0/-0.015 10 164 176 220 40.5 20 x D 3520HL0810 f
8.20 0/-0.015 10 166 178 220 41 20 x D 3520HL0820 f
8.30 0/-0.015 10 168 180 225 41.5 20 x D 3520HL0830 f
8.40 0/-0.015 10 170 183 225 42 20 x D 3520HL0840 f
8.50 0/-0.015 10 172 185 230 42.5 20 x D 3520HL0850 h
8.60 0/-0.015 10 174 187 230 43 20 x D 3520HL0860 f
8.70 0/-0.015 10 176 189 230 43.5 20 x D 3520HL0870 f
8.80 0/-0.015 10 178 191 235 44 20 x D 3520HL0880 h
8.90 0/-0.015 10 180 193 235 44.5 20 x D 3520HL0890 f
9.00 0/-0.015 10 182 196 240 45 20 x D 3520HL0900 h
9.10 0/-0.015 10 184 198 240 45.5 20 x D 3520HL0910 f
9.20 0/-0.015 10 186 200 245 46 20 x D 3520HL0920 f
9.30 0/-0.015 10 188 202 245 46.5 20 x D 3520HL0930 f
9.40 0/-0.015 10 190 204 245 47 20 x D 3520HL0940 f
9.50 0/-0.015 10 192 206 250 47.5 20 x D 3520HL0950 h
9.60 0/-0.015 10 194 208 250 48 20 x D 3520HL0960 f
9.70 0/-0.015 10 196 211 255 48.5 20 x D 3520HL0970 f
9.80 0/-0.015 10 198 213 255 49 20 x D 3520HL0980 f
9.90 0/-0.015 10 200 215 260 49.5 20 x D 3520HL0990 f
10.00 0/-0.015 10 202 217 260 50 20 x D 3520HL1000 h
3520HL
4-margin lands, long (20xD), polished flutes,
HL (through coolant)
20XD OSAWA
NORM 135°
PMKNSH
+++,,
+ 1st choice , suitable
TYPHOON - high performance solid carbide drills
185
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
CUTTING PARAMETERS
3520HL
Ø RUN OUT
<0.02mm
Material Group
ISO 513 P1 P2 P3 P4 P5 P6
Hardness/Rm 500-700 N/mm² 600-1000 N/mm² 900-1200 N/mm² 1200-1400 N/mm²
Vc (m/min) 60-80 50-70 40-60 30-50
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
3.0 7430 0.055 410 6369 0.050 320 5308 0.044 230 4246 0.039 160
3.5 6370 0.064 410 5460 0.057 310 4550 0.051 230 3640 0.045 160
4.0 5570 0.077 430 4777 0.069 330 3981 0.061 240 3185 0.054 170
4.5 4950 0.089 440 4246 0.080 340 3539 0.071 250 2831 0.062 180
5.0 4460 0.102 450 3822 0.092 350 3185 0.082 260 2548 0.071 180
5.5 4050 0.115 460 3474 0.103 360 2895 0.092 270 2316 0.080 190
6.0 3720 0.128 470 3185 0.115 370 2654 0.102 270 2123 0.089 190
6.5 3430 0.140 480 2940 0.126 370 2450 0.112 270 1960 0.098 190
7.0 3180 0.153 490 2730 0.138 380 2275 0.122 280 1820 0.107 190
7.5 2970 0.166 490 2548 0.149 380 2123 0.133 280 1699 0.116 200
8.0 2790 0.179 500 2389 0.161 380 1990 0.143 280 1592 0.125 200
8.5 2620 0.191 500 2248 0.172 390 1873 0.153 290 1499 0.134 200
9.0 2480 0.204 510 2123 0.184 390 1769 0.163 290 1415 0.143 200
9.5 2350 0.217 510 2011 0.195 390 1676 0.173 290 1341 0.152 200
10.0 2230 0.230 510 1911 0.207 390 1592 0.184 290 1274 0.161 200
Ø RUN OUT
<0.02mm
Material Group
ISO 513 M1 M2 M3 M4 M5
Hardness/Rm < 750 N/mm² 550-850 N/mm² 650-950 N/mm² 850-1200 N/mm²
Vc (m/min) 30-50 30-40 25-35 20-30
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
3.0 4780 0.041 200 3720 0.035 130 3180 0.029 90 2650 0.025 70
3.5 4090 0.048 200 3180 0.041 130 2730 0.033 90 2275 0.029 70
4.0 3580 0.057 210 2790 0.049 140 2390 0.040 100 1990 0.034 70
4.5 3180 0.067 210 2480 0.057 140 2120 0.047 100 1769 0.040 70
5.0 2870 0.077 220 2230 0.065 150 1910 0.054 100 1592 0.046 70
5.5 2610 0.086 220 2030 0.073 150 1740 0.060 100 1448 0.052 70
6.0 2390 0.096 230 1860 0.081 150 1590 0.067 110 1327 0.057 80
6.5 2200 0.105 230 1710 0.089 150 1470 0.074 110 1225 0.063 80
7.0 2050 0.115 240 1590 0.098 160 1360 0.080 110 1137 0.069 80
7.5 1910 0.124 240 1490 0.106 160 1270 0.087 110 1062 0.075 80
8.0 1790 0.134 240 1390 0.114 160 1190 0.094 110 995 0.080 80
8.5 1690 0.143 240 1310 0.122 160 1120 0.100 110 937 0.086 80
9.0 1590 0.153 240 1240 0.130 160 1060 0.107 110 885 0.092 80
9.5 1510 0.163 250 1170 0.138 160 1010 0.114 110 838 0.098 80
10.0 1430 0.172 250 1110 0.146 160 960 0.120 120 796 0.103 80
TYPHOON - high performance solid carbide drills
186
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
CUTTING PARAMETERS
3520HL
Ø RUN OUT
<0.02mm
Material Group
ISO 513 K1 K2 K3 K4
Hardness/Rm 150-250 HB 150-350 HB 120-260 HB 250-500 HB
Vc (m/min) 60-80 50-70 40-60 30-50
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
3.0 7430 0.055 410 6370 0.050 320 5310 0.044 230 4250 0.039 160
3.5 6370 0.064 410 5460 0.057 310 4550 0.051 230 3640 0.045 160
4.0 5570 0.077 430 4780 0.069 330 3980 0.061 240 3180 0.054 170
4.5 4950 0.089 440 4250 0.080 340 3540 0.071 250 2830 0.062 180
5.0 4460 0.102 450 3820 0.092 350 3180 0.082 260 2550 0.071 180
5.5 4050 0.115 460 3470 0.103 360 2900 0.092 270 2320 0.080 190
6.0 3720 0.128 470 3180 0.115 360 2650 0.102 270 2120 0.089 190
6.5 3430 0.140 480 2940 0.126 370 2450 0.112 270 1960 0.098 190
7.0 3180 0.153 490 2730 0.138 380 2270 0.122 280 1820 0.107 190
7.5 2970 0.166 490 2550 0.149 380 2120 0.133 280 1700 0.116 200
8.0 2790 0.179 500 2390 0.161 380 1990 0.143 280 1590 0.125 200
8.5 2620 0.191 500 2250 0.172 390 1870 0.153 290 1500 0.134 200
9.0 2480 0.204 510 2120 0.184 390 1770 0.163 290 1420 0.143 200
9.5 2350 0.217 510 2010 0.195 390 1680 0.173 290 1340 0.152 200
10.0 2230 0.230 510 1910 0.207 390 1590 0.184 290 1270 0.161 200
Ø RUN OUT
<0.02mm
Material Group
ISO 513 N1 N2 N3 N4
Hardness/Rm
Vc (m/min) 60-80 50-70 50-70
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
3.0 7430 0.069 510 6370 0.062 400 6370 0.055 350
3.5 6370 0.080 510 5460 0.072 390 5460 0.064 350
4.0 5570 0.096 530 4780 0.086 410 4780 0.077 370
4.5 4950 0.112 550 4250 0.100 430 4250 0.089 380
5.0 4460 0.128 570 3820 0.115 440 3820 0.102 390
5.5 4050 0.143 580 3470 0.129 450 3470 0.115 400
6.0 3720 0.159 590 3180 0.143 460 3180 0.128 410
6.5 3430 0.175 600 2940 0.158 460 2940 0.140 410
7.0 3180 0.191 610 2730 0.172 470 2730 0.153 420
7.5 2970 0.207 620 2550 0.186 480 2550 0.166 420
8.0 2790 0.223 620 2390 0.201 480 2390 0.179 430
8.5 2620 0.239 630 2250 0.215 480 2250 0.191 430
9.0 2480 0.255 630 2120 0.230 490 2120 0.204 430
9.5 2350 0.271 640 2010 0.244 490 2010 0.217 440
10.0 2230 0.287 640 1910 0.258 490 1910 0.230 440
TYPHOON - high performance solid carbide drills
187
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
CUTTING PARAMETERS
3520HL
Ø RUN OUT
<0.02mm
Material Group
ISO 513 S1 S2 S3 S4 S5
Hardness/Rm < 35 HRC 35-45 HRC
Vc (m/min) 25-35 15-25 25-35 15-25
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
3.0 3180 0.039 120 2120 0.027 57 3180 0.037 120 2120 0.031 66
3.5 2730 0.045 120 1820 0.031 57 2730 0.042 120 1820 0.036 65
4.0 2390 0.054 130 1590 0.037 60 2390 0.051 120 1590 0.043 68
4.5 2120 0.062 130 1420 0.044 62 2120 0.059 130 1420 0.050 70
5.0 1910 0.071 140 1270 0.050 63 1910 0.068 130 1270 0.057 70
5.5 1740 0.080 140 1160 0.056 65 1740 0.076 130 1160 0.064 70
6.0 1590 0.089 140 1060 0.062 66 1590 0.085 130 1060 0.071 80
6.5 1470 0.098 140 980 0.069 67 1470 0.093 140 980 0.079 80
7.0 1360 0.107 150 910 0.075 68 1360 0.102 140 910 0.086 80
7.5 1270 0.116 150 850 0.081 69 1270 0.110 140 850 0.093 80
8.0 1190 0.125 150 800 0.087 70 1190 0.119 140 800 0.100 80
8.5 1120 0.134 150 750 0.094 70 1120 0.127 140 750 0.107 80
9.0 1060 0.143 150 710 0.100 70 1060 0.136 140 710 0.114 80
9.5 1010 0.152 150 670 0.106 70 1010 0.144 150 670 0.121 80
10.0 960 0.161 150 640 0.112 70 960 0.153 150 640 0.129 80
TYPHOON - high performance solid carbide drills
188
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
h stock standard f non-standard stock m stock exhaustion
D(h7) D Tol. d(h6) l l1 L l-4M drilling length EDP No. Stock
3.10* 0/-0.012 4 79 83 120 15.5 25 x D 3525HL0310 f
3.20 0/-0.012 4 81 86 120 16 25 x D 3525HL0320 f
3.30 0/-0.012 4 84 88 125 16.5 25 x D 3525HL0330 f
3.40 0/-0.012 4 86 91 125 17 25 x D 3525HL0340 f
3.50 0/-0.012 4 89 94 130 17.5 25 x D 3525HL0350 h
3.60 0/-0.012 4 91 96 130 18 25 x D 3525HL0360 f
3.70 0/-0.012 4 94 99 135 18.5 25 x D 3525HL0370 f
3.80 0/-0.012 4 96 102 135 19 25 x D 3525HL0380 f
3.90 0/-0.012 4 99 104 140 19.5 25 x D 3525HL0390 f
4.00 0/-0.012 4 101 107 140 20 25 x D 3525HL0400 h
4.10 0/-0.012 5 104 110 145 20.5 25 x D 3525HL0410 f
4.20 0/-0.012 5 106 112 150 21 25 x D 3525HL0420 f
4.30 0/-0.012 5 109 115 150 21.5 25 x D 3525HL0430 f
4.40 0/-0.012 5 111 118 155 22 25 x D 3525HL0440 f
4.50 0/-0.012 5 114 120 155 22.5 25 x D 3525HL0450 h
4.60 0/-0.012 5 116 123 160 23 25 x D 3525HL0460 f
4.70 0/-0.012 5 119 126 165 23.5 25 x D 3525HL0470 f
4.80 0/-0.012 5 121 128 165 24 25 x D 3525HL0480 f
4.90 0/-0.012 5 124 131 170 24.5 25 x D 3525HL0490 f
5.00 0/-0.012 5 126 134 170 25 25 x D 3525HL0500 h
5.10 0/-0.012 6 129 136 175 25.5 25 x D 3525HL0510 f
5.20 0/-0.012 6 131 139 180 26 25 x D 3525HL0520 f
5.30 0/-0.012 6 134 141 180 26.5 25 x D 3525HL0530 f
5.40 0/-0.012 6 136 144 185 27 25 x D 3525HL0540 f
5.50 0/-0.012 6 139 147 185 27.5 25 x D 3525HL0550 h
5.60 0/-0.012 6 141 149 190 28 25 x D 3525HL0560 f
5.70 0/-0.012 6 144 152 190 28.5 25 x D 3525HL0570 f
5.80 0/-0.012 6 146 155 195 29 25 x D 3525HL0580 f
5.90 0/-0.012 6 149 157 195 29.5 25 x D 3525HL0590 f
6.00 0/-0.012 6 151 160 200 30 25 x D 3525HL0600 h
6.10 0/-0.015 8 154 163 200 30.5 25 x D 3525HL0610 f
6.20 0/-0.015 8 156 165 205 31 25 x D 3525HL0620 f
6.30 0/-0.015 8 159 168 205 31.5 25 x D 3525HL0630 f
6.40 0/-0.015 8 161 171 210 32 25 x D 3525HL0640 f
6.50 0/-0.015 8 164 173 210 32.5 25 x D 3525HL0650 h
6.60 0/-0.015 8 166 176 215 33 25 x D 3525HL0660 f
6.70 0/-0.015 8 169 179 220 33.5 25 x D 3525HL0670 f
6.80 0/-0.015 8 171 181 220 34 25 x D 3525HL0680 f
6.90 0/-0.015 8 174 184 225 34.5 25 x D 3525HL0690 f
3525HL
4-margin lands, long (25xD), polished flutes,
HL (through coolant)
25XD OSAWA
NORM 135°
PMKNSH
+++,,
+ 1st choice , suitable
* Ø1÷Ø3 = 3525 SUH MINI page 156
TYPHOON - high performance solid carbide drills
189
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
h stock standard f non-standard stock m stock exhaustion
D(h7) D Tol. d(h6) l l1 L l-4M drilling length EDP No. Stock
7.00 0/-0.015 8 176 187 230 35 25 x D 3525HL0700 h
7.10 0/-0.015 8 179 189 230 35.5 25 x D 3525HL0710 f
7.20 0/-0.015 8 181 192 235 36 25 x D 3525HL0720 f
7.30 0/-0.015 8 184 194 235 36.5 25 x D 3525HL0730 f
7.40 0/-0.015 8 186 197 240 37 25 x D 3525HL0740 f
7.50 0/-0.015 8 189 200 240 37.5 25 x D 3525HL0750 f
7.60 0/-0.015 8 191 202 245 38 25 x D 3525HL0760 f
7.70 0/-0.015 8 194 205 245 38.5 25 x D 3525HL0770 f
7.80 0/-0.015 8 196 208 250 39 25 x D 3525HL0780 f
7.90 0/-0.015 8 199 210 250 39.5 25 x D 3525HL0790 f
8.00 0/-0.015 8 201 213 255 40 25 x D 3525HL0800 h
8.10 0/-0.015 10 204 216 260 40.5 25 x D 3525HL0810 f
8.20 0/-0.015 10 206 218 260 41 25 x D 3525HL0820 f
8.30 0/-0.015 10 209 221 265 41.5 25 x D 3525HL0830 f
8.40 0/-0.015 10 211 224 265 42 25 x D 3525HL0840 f
8.50 0/-0.015 10 214 226 270 42.5 25 x D 3525HL0850 f
8.60 0/-0.015 10 216 229 270 43 25 x D 3525HL0860 f
8.70 0/-0.015 10 219 232 275 43.5 25 x D 3525HL0870 f
8.80 0/-0.015 10 221 234 275 44 25 x D 3525HL0880 f
8.90 0/-0.015 10 224 237 280 44.5 25 x D 3525HL0890 f
9.00 0/-0.015 10 226 240 285 45 25 x D 3525HL0900 f
9.10 0/-0.015 10 229 242 285 45.5 25 x D 3525HL0910 f
9.20 0/-0.015 10 231 245 290 46 25 x D 3525HL0920 f
9.30 0/-0.015 10 234 247 290 46.5 25 x D 3525HL0930 f
9.40 0/-0.015 10 236 250 295 47 25 x D 3525HL0940 f
9.50 0/-0.015 10 239 253 295 47.5 25 x D 3525HL0950 f
3525HL
4-margin lands, long (25xD), polished flutes,
HL (through coolant)
25XD OSAWA
NORM 135°
PMKNSH
+++,,
+ 1st choice , suitable
TYPHOON - high performance solid carbide drills
190
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
CUTTING PARAMETERS
3525HL
Ø RUN OUT
<0.02mm
Material Group
ISO 513 P1 P2 P3 P4 P5 P6
Hardness/Rm 500-700 N/mm² 600-1000 N/mm² 900-1200 N/mm² 1200-1400 N/mm²
Vc (m/min) 55-75 45-65 35-55 30-40
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
3.0 6900 0.052 360 5840 0.047 270 4780 0.042 200 3720 0.036 140
3.5 5910 0.060 350 5000 0.054 270 4090 0.048 200 3180 0.042 130
4.0 5180 0.072 370 4380 0.065 280 3580 0.058 210 2790 0.050 140
4.5 4600 0.084 390 3890 0.076 290 3180 0.067 210 2480 0.059 150
5.0 4140 0.096 400 3500 0.086 300 2870 0.077 220 2230 0.067 150
5.5 3760 0.108 410 3180 0.097 310 2610 0.086 230 2030 0.076 150
6.0 3450 0.120 410 2920 0.108 320 2390 0.096 230 1860 0.084 160
6.5 3180 0.132 420 2690 0.119 320 2200 0.106 230 1710 0.092 160
7.0 2960 0.144 430 2500 0.130 320 2050 0.115 240 1590 0.101 160
7.5 2760 0.156 430 2340 0.140 330 1910 0.125 240 1490 0.109 160
8.0 2590 0.168 440 2190 0.151 330 1790 0.134 240 1390 0.118 160
8.5 2440 0.180 440 2060 0.162 330 1690 0.144 240 1310 0.126 170
9.0 2300 0.192 440 1950 0.173 340 1590 0.154 240 1240 0.134 170
9.5 2180 0.204 440 1840 0.184 340 1510 0.163 250 1170 0.143 170
Ø RUN OUT
<0.02mm
Material Group
ISO 513 M1 M2 M3 M4 M5
Hardness/Rm < 750 N/mm² 550-850 N/mm² 650-950 N/mm² 850-1200 N/mm²
Vc (m/min) 30-50 30-40 25-35 20-30
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
3.0 4780 0.039 190 3720 0.033 120 3180 0.027 90 2650 0.023 62
3.5 4090 0.045 180 3180 0.038 120 2730 0.032 90 2270 0.027 61
4.0 3580 0.054 190 2790 0.046 130 2390 0.038 90 1990 0.032 64
4.5 3180 0.063 200 2480 0.054 130 2120 0.044 90 1770 0.038 67
5.0 2870 0.072 210 2230 0.061 140 1910 0.050 100 1590 0.043 69
5.5 2610 0.081 210 2030 0.069 140 1740 0.057 100 1450 0.049 70
6.0 2390 0.090 220 1860 0.077 140 1590 0.063 100 1330 0.054 70
6.5 2200 0.099 220 1710 0.084 140 1470 0.069 100 1220 0.059 70
7.0 2050 0.108 220 1590 0.092 150 1360 0.076 100 1140 0.065 70
7.5 1910 0.117 220 1490 0.099 150 1270 0.082 100 1060 0.070 70
8.0 1790 0.126 230 1390 0.107 150 1190 0.088 100 1000 0.076 80
8.5 1690 0.135 230 1310 0.115 150 1120 0.095 110 940 0.081 80
9.0 1590 0.144 230 1240 0.122 150 1060 0.101 110 880 0.086 80
9.5 1510 0.153 230 1170 0.130 150 1010 0.107 110 840 0.092 80
TYPHOON - high performance solid carbide drills
191
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
CUTTING PARAMETERS
3525HL
Ø RUN OUT
<0.02mm
Material Group
ISO 513 K1 K2 K3 K4
Hardness/Rm 150-250 HB 150-350 HB 120-260 HB 250-500 HB
Vc (m/min) 55-75 45-65 35-55 30-40
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
3.0 6900 0.052 360 5840 0.047 270 4780 0.042 200 3720 0.036 140
3.5 5910 0.060 350 5000 0.054 270 4090 0.048 200 3180 0.042 130
4.0 5180 0.072 370 4380 0.065 280 3580 0.058 210 2790 0.050 140
4.5 4600 0.084 390 3890 0.076 290 3180 0.067 210 2480 0.059 150
5.0 4140 0.096 400 3500 0.086 300 2870 0.077 220 2230 0.067 150
5.5 3760 0.108 410 3180 0.097 310 2610 0.086 230 2030 0.076 150
6.0 3450 0.120 410 2920 0.108 320 2390 0.096 230 1860 0.084 160
6.5 3180 0.132 420 2690 0.119 320 2200 0.106 230 1710 0.092 160
7.0 2960 0.144 430 2500 0.130 320 2050 0.115 240 1590 0.101 160
7.5 2760 0.156 430 2340 0.140 330 1910 0.125 240 1490 0.109 160
8.0 2590 0.168 440 2190 0.151 330 1790 0.134 240 1390 0.118 160
8.5 2440 0.180 440 2060 0.162 330 1690 0.144 240 1310 0.126 170
9.0 2300 0.192 440 1950 0.173 340 1590 0.154 240 1240 0.134 170
9.5 2180 0.204 440 1840 0.184 340 1510 0.163 250 1170 0.143 170
Ø RUN OUT
<0.02mm
Material Group
ISO 513 N1 N2 N3 N4
Hardness/Rm
Vc (m/min) 60-80 50-70 50-70
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
3.0 7430 0.065 480 6370 0.059 370 6370 0.052 330
3.5 6370 0.075 480 5460 0.068 370 5460 0.060 330
4.0 5570 0.090 500 4780 0.081 390 4780 0.072 340
4.5 4950 0.105 520 4250 0.095 400 4250 0.084 360
5.0 4460 0.120 540 3820 0.108 410 3820 0.096 370
5.5 4050 0.135 550 3470 0.122 420 3470 0.108 370
6.0 3720 0.150 560 3180 0.135 430 3180 0.120 380
6.5 3430 0.165 570 2940 0.149 440 2940 0.132 390
7.0 3180 0.180 570 2730 0.162 440 2730 0.144 390
7.5 2970 0.195 580 2550 0.176 450 2550 0.156 400
8.0 2790 0.210 590 2390 0.189 450 2390 0.168 400
8.5 2620 0.225 590 2250 0.203 460 2250 0.180 410
9.0 2480 0.240 600 2120 0.216 460 2120 0.192 410
9.5 2350 0.255 600 2010 0.230 460 2010 0.204 410
TYPHOON - high performance solid carbide drills
192
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
CUTTING PARAMETERS
3525HL
Ø RUN OUT
<0.02mm
Material Group
ISO 513 S1 S2 S3 S4 S5
Hardness/Rm < 35 HRC 35-45 HRC
Vc (m/min) 25-35 15-25 25-35 15-25
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
3.0 3180 0.036 120 2120 0.025 54 3180 0.035 110 2120 0.029 60
3.5 2730 0.042 110 1820 0.029 54 2730 0.040 110 1820 0.034 60
4.0 2390 0.050 120 1590 0.035 56 2390 0.048 110 1590 0.040 60
4.5 2120 0.059 120 1420 0.041 58 2120 0.056 120 1420 0.047 70
5.0 1910 0.067 130 1270 0.047 60 1910 0.064 120 1270 0.054 70
5.5 1740 0.076 130 1160 0.053 61 1740 0.072 120 1160 0.060 70
6.0 1590 0.084 130 1060 0.059 62 1590 0.080 130 1060 0.067 70
6.5 1470 0.092 140 980 0.065 63 1470 0.088 130 980 0.074 70
7.0 1360 0.101 140 910 0.071 64 1360 0.096 130 910 0.081 70
7.5 1270 0.109 140 850 0.076 65 1270 0.104 130 850 0.087 70
8.0 1190 0.118 140 800 0.082 66 1190 0.112 130 800 0.094 80
8.5 1120 0.126 140 750 0.088 66 1120 0.120 130 750 0.101 80
9.0 1060 0.134 140 710 0.094 67 1060 0.128 140 710 0.108 80
9.5 1010 0.143 140 670 0.100 67 1010 0.136 140 670 0.114 80
TYPHOON - high performance solid carbide drills
193
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
h stock standard f non-standard stock m stock exhaustion
D(h7) D Tol. d(h6) l l1 L l-4M drilling length EDP No. Stock
3.10* 0/-0.012 4 94 99 135 15.5 30 x D 3530HL0310 f
3.20 0/-0.012 4 97 102 135 16 30 x D 3530HL0320 f
3.30 0/-0.012 4 100 105 140 16.5 30 x D 3530HL0330 f
3.40 0/-0.012 4 103 108 145 17 30 x D 3530HL0340 f
3.50 0/-0.012 4 106 111 145 17.5 30 x D 3530HL0350 h
3.60 0/-0.012 4 109 114 150 18 30 x D 3530HL0360 f
3.70 0/-0.012 4 112 118 155 18.5 30 x D 3530HL0370 f
3.80 0/-0.012 4 115 121 155 19 30 x D 3530HL0380 f
3.90 0/-0.012 4 118 124 160 19.5 30 x D 3530HL0390 f
4.00 0/-0.012 4 121 127 160 20 30 x D 3530HL0400 h
4.10 0/-0.012 5 124 130 165 20.5 30 x D 3530HL0410 f
4.20 0/-0.012 5 127 133 170 21 30 x D 3530HL0420 f
4.30 0/-0.012 5 130 136 175 21.5 30 x D 3530HL0430 f
4.40 0/-0.012 5 133 140 175 22 30 x D 3530HL0440 f
4.50 0/-0.012 5 136 143 180 22.5 30 x D 3530HL0450 h
4.60 0/-0.012 5 139 146 185 23 30 x D 3530HL0460 f
4.70 0/-0.012 5 142 149 185 23.5 30 x D 3530HL0470 f
4.80 0/-0.012 5 145 152 190 24 30 x D 3530HL0480 f
4.90 0/-0.012 5 148 155 190 24.5 30 x D 3530HL0490 f
5.00 0/-0.012 5 151 159 195 25 30 x D 3530HL0500 h
5.10 0/-0.012 6 154 162 200 25.5 30 x D 3530HL0510 f
5.20 0/-0.012 6 157 165 205 26 30 x D 3530HL0520 f
5.30 0/-0.012 6 160 168 205 26.5 30 x D 3530HL0530 f
5.40 0/-0.012 6 163 171 210 27 30 x D 3530HL0540 f
5.50 0/-0.012 6 166 174 215 27.5 30 x D 3530HL0550 h
5.60 0/-0.012 6 169 177 215 28 30 x D 3530HL0560 f
5.70 0/-0.012 6 172 181 220 28.5 30 x D 3530HL0570 f
5.80 0/-0.012 6 175 184 225 29 30 x D 3530HL0580 f
5.90 0/-0.012 6 178 187 225 29.5 30 x D 3530HL0590 f
6.00 0/-0.012 6 181 190 230 30 30 x D 3530HL0600 h
6.10 0/-0.015 8 184 193 230 30.5 30 x D 3530HL0610 f
6.20 0/-0.015 8 187 196 135 31 30 x D 3530HL0620 f
6.30 0/-0.015 8 190 199 240 31.5 30 x D 3530HL0630 f
6.40 0/-0.015 8 193 203 240 32 30 x D 3530HL0640 f
6.50 0/-0.015 8 196 206 245 32.5 30 x D 3530HL0650 h
6.60 0/-0.015 8 199 209 250 33 30 x D 3530HL0660 f
6.70 0/-0.015 8 202 212 250 33.5 30 x D 3530HL0670 f
6.80 0/-0.015 8 205 215 255 34 30 x D 3530HL0680 f
6.90 0/-0.015 8 208 218 255 34.5 30 x D 3530HL0690 f
3530HL
4-margin lands, long (30xD), polished flutes,
HL (through coolant)
30XD OSAWA
NORM 135°
PMKNSH
+++,,
+ 1st choice , suitable
* Ø1÷Ø3 = 3530 SUH MINI page 160
TYPHOON - high performance solid carbide drills
194
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
h stock standard f non-standard stock m stock exhaustion
D(h7) D Tol. d(h6) l l1 L l-4M drilling length EDP No. Stock
7.00 0/-0.015 8 211 222 265 35 30 x D 3530HL0700 f
7.10 0/-0.015 8 214 225 265 35.5 30 x D 3530HL0710 f
7.20 0/-0.015 8 217 228 270 36 30 x D 3530HL0720 f
7.30 0/-0.015 8 220 231 270 36.5 30 x D 3530HL0730 f
7.40 0/-0.015 8 223 234 275 37 30 x D 3530HL0740 f
7.50 0/-0.015 8 226 237 280 37.5 30 x D 3530HL0750 f
7.60 0/-0.015 8 229 240 280 38 30 x D 3530HL0760 f
7.70 0/-0.015 8 232 244 285 38.5 30 x D 3530HL0770 f
7.80 0/-0.015 8 235 247 290 39 30 x D 3530HL0780 f
7.90 0/-0.015 8 238 250 290 39.5 30 x D 3530HL0790 f
8.00 0/-0.015 8 241 253 295 40 30 x D 3530HL0800 h
3530HL
4-margin lands, long (30xD), polished flutes,
HL (through coolant)
30XD OSAWA
NORM
135°
PMKNSH
+++,,
+ 1st choice , suitable
TYPHOON - high performance solid carbide drills
195
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
CUTTING PARAMETERS
3530HL
Ø RUN OUT
<0.02mm
Material Group
ISO 513 P1 P2 P3 P4 P5 P6
Hardness/Rm 500-700 N/mm² 600-1000 N/mm² 900-1200 N/mm² 1200-1400 N/mm²
Vc (m/min) 50-70 40-60 30-50 25-35
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
3.0 6370 0.046 290 5310 0.041 220 4250 0.036 150 3180 0.032 100
3.5 5460 0.053 287 4550 0.047 210 3640 0.042 150 2730 0.037 100
4.0 4780 0.063 301 3980 0.057 230 3180 0.050 160 2390 0.044 110
4.5 4250 0.074 312 3540 0.066 230 2830 0.059 170 2120 0.051 110
5.0 3820 0.084 321 3180 0.076 240 2550 0.067 170 1910 0.059 110
5.5 3470 0.095 328 2900 0.085 250 2320 0.076 180 1740 0.066 120
6.0 3180 0.105 334 2650 0.095 250 2120 0.084 180 1590 0.074 120
6.5 2940 0.116 340 2450 0.104 250 1960 0.092 180 1470 0.081 120
7.0 2730 0.126 344 2270 0.113 260 1820 0.101 180 1360 0.088 120
7.5 2550 0.137 348 2120 0.123 260 1700 0.109 190 1270 0.096 120
8.0 2390 0.147 351 1990 0.132 260 1590 0.118 190 1190 0.103 120
Ø RUN OUT
<0.02mm
Material Group
ISO 513 M1 M2 M3 M4 M5
Hardness/Rm < 750 N/mm² 550-850 N/mm² 650-950 N/mm² 850-1200 N/mm²
Vc (m/min) 35-45 25-35 20-30 15-25
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
3.0 4250 0.034 150 3180 0.029 90 2650 0.024 63 2120 0.020 43
3.5 3640 0.039 140 2730 0.033 90 2270 0.028 63 1820 0.024 43
4.0 3180 0.047 150 2390 0.040 100 1990 0.033 66 1590 0.028 45
4.5 2830 0.055 160 2120 0.047 100 1770 0.039 68 1420 0.033 47
5.0 2550 0.063 160 1910 0.054 100 1590 0.044 70 1270 0.038 48
5.5 2320 0.071 160 1740 0.060 100 1450 0.050 70 1160 0.043 49
6.0 2120 0.079 170 1590 0.067 110 1330 0.055 70 1060 0.047 50
6.5 1960 0.087 170 1470 0.074 110 1220 0.061 70 980 0.052 51
7.0 1820 0.095 170 1360 0.080 110 1140 0.066 80 910 0.057 52
7.5 1700 0.102 170 1270 0.087 110 1060 0.072 80 850 0.061 52
8.0 1590 0.110 180 1190 0.094 110 1000 0.077 80 800 0.066 53
TYPHOON - high performance solid carbide drills
196
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
CUTTING PARAMETERS
3530HL
Ø RUN OUT
<0.02mm
Material Group
ISO 513 K1 K2 K3 K4
Hardness/Rm 150-250 HB 150-350 HB 120-260 HB 250-500 HB
Vc (m/min) 50-70 40-60 30-50 25-35
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
3.0 6370 0.046 290 5310 0.041 220 4250 0.036 150 3180 0.032 100
3.5 5460 0.053 290 4550 0.047 210 3640 0.042 150 2730 0.037 100
4.0 4780 0.063 300 3980 0.057 230 3180 0.050 160 2390 0.044 110
4.5 4250 0.074 310 3540 0.066 230 2830 0.059 170 2120 0.051 110
5.0 3820 0.084 320 3180 0.076 240 2550 0.067 170 1910 0.059 110
5.5 3470 0.095 330 2900 0.085 250 2320 0.076 180 1740 0.066 120
6.0 3180 0.105 330 2650 0.095 250 2120 0.084 180 1590 0.074 120
6.5 2940 0.116 340 2450 0.104 250 1960 0.092 180 1470 0.081 120
7.0 2730 0.126 340 2270 0.113 260 1820 0.101 180 1360 0.088 120
7.5 2550 0.137 350 2120 0.123 260 1700 0.109 190 1270 0.096 120
8.0 2390 0.147 350 1990 0.132 260 1590 0.118 190 1190 0.103 120
Ø RUN OUT
<0.02mm
Material Group
ISO 513 N1 N2 N3 N4
Hardness/Rm
Vc (m/min) 50-70 40-60 40-60
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
3.0 6370 0.057 360 5310 0.051 270 5310 0.046 240
3.5 5460 0.066 360 4550 0.059 270 4550 0.053 240
4.0 4780 0.079 380 3980 0.071 280 3980 0.063 250
4.5 4250 0.092 390 3540 0.083 290 3540 0.074 260
5.0 3820 0.105 400 3180 0.095 300 3180 0.084 270
5.5 3470 0.118 410 2900 0.106 310 2900 0.095 270
6.0 3180 0.131 420 2650 0.118 310 2650 0.105 280
6.5 2940 0.144 420 2450 0.130 320 2450 0.116 280
7.0 2730 0.158 430 2270 0.142 320 2270 0.126 290
7.5 2550 0.171 440 2120 0.154 330 2120 0.137 290
8.0 2390 0.184 440 1990 0.165 330 1990 0.147 290
TYPHOON - high performance solid carbide drills
197
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
CUTTING PARAMETERS
3530HL
Ø RUN OUT
<0.02mm
Material Group
ISO 513 S1 S2 S3 S4 S5
Hardness/Rm < 35 HRC 35-45 HRC
Vc (m/min) 25-35 15-25 25-35 15-25
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
3.0 3180 0.032 100 2120 0.022 47 3180 0.030 100 2120 0.025 54
3.5 2730 0.037 100 1820 0.026 47 2730 0.035 100 1820 0.029 54
4.0 2390 0.044 110 1590 0.031 49 2390 0.042 100 1590 0.035 56
4.5 2120 0.051 110 1420 0.036 51 2120 0.049 100 1420 0.041 58
5.0 1910 0.059 110 1270 0.041 52 1910 0.056 110 1270 0.047 60
5.5 1740 0.066 120 1160 0.046 54 1740 0.063 110 1160 0.053 61
6.0 1590 0.074 120 1060 0.051 55 1590 0.070 110 1060 0.059 62
6.5 1470 0.081 120 980 0.057 55 1470 0.077 110 980 0.065 63
7.0 1360 0.088 120 910 0.062 56 1360 0.084 110 910 0.071 64
7.5 1270 0.096 120 850 0.067 57 1270 0.091 120 850 0.076 65
8.0 1190 0.103 120 800 0.072 58 1190 0.098 120 800 0.082 66
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
C-SD-TA
C-SD-TA
NC SPOTTING
90° - 120° starting drills for NC centering and chamfering on
a wide range of materials.
Punte da centri a 90° e 120° per NC. Centratura e svasatura
su una vasta gamma di materiali.
Anbohrer mit Spitzenwinkel 90° und 120° für NC Maschinen.
Zentrierung und Ansenkung auf einem sehr breiten Spektrum
von Materialien.
Forets à centrer et chanfreiner 90°-120°, pour une grande
variété de matériaux.
Brocas para puntear y escariar 90°-120° sobre una gran
variedad de materiales.
Центровочные свёрла с углами при вершине 90°-120°
для сверления центровых отверстий и зенкования в
широкой гамме материалов на станках с ЧПУ.
NC starting drills
200
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
C-SD-TA
h stock standard f non-standard stock m stock exhaustion
C-SD-TA
solid carbide NC starting drills, 90°-120°
OSAWA
NORM
90-120°
90°
120°
PMKNSH
++++,
+ 1st choice , suitable
C-SD-TA 90° C-SD-TA 120°
D(h6) D Tol. D(h6) l l1 L EDP No. Stock EDP No. Stock
6.00 0/-0.008 6 16 50 CSDTA060A hCSDTA060B h
8.00 0/-0.009 8 20 64 CSDTA080A hCSDTA080B h
10.00 0/-0.009 10 25 70 CSDTA100A hCSDTA100B h
12.00 0/-0.011 12 25 75 CSDTA120A hCSDTA120B h
16.00 0/-0.011 16 26 90 CSDTA160A hCSDTA160B h
NC starting drills
201
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
C-SD-TA
CUTTING PARAMETERS
C-SD-TA
Material Group
ISO 513 P1 P2 P3 P4 P5 P6
Hardness/Rm 500-700 N/mm² 600-1000 N/mm² 900-1200 N/mm² 1200-1400 N/mm²
Vc (m/min) 90-110 70-90 60-80 50-70
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
65310 0.140 740 4250 0.126 540 3720 0.112 420 3180 0.098 310
74550 0.160 730 3640 0.144 520 3180 0.128 410 2730 0.112 310
83980 0.180 720 3180 0.162 520 2790 0.144 400 2390 0.126 300
93540 0.200 710 2830 0.180 510 2480 0.160 400 2120 0.140 300
10 3180 0.220 700 2550 0.198 500 2230 0.176 390 1910 0.154 290
11 2900 0.240 700 2320 0.216 500 2030 0.192 390 1740 0.168 290
12 2650 0.260 690 2120 0.234 500 1860 0.208 390 1590 0.182 290
13 2450 0.280 690 1960 0.252 490 1710 0.224 380 1470 0.196 290
14 2270 0.300 680 1820 0.270 490 1590 0.240 380 1360 0.210 290
15 2120 0.320 680 1700 0.288 490 1490 0.256 380 1270 0.224 280
16 1990 0.340 680 1590 0.306 490 1390 0.272 380 1190 0.238 280
Material Group
ISO 513 M1 M2 M3 M4 M5
Hardness/Rm < 750 N/mm² 550-850 N/mm² 650-950 N/mm² 850-1200 N/mm²
Vc (m/min) 50-70 40-60 30-40 20-30
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
63180 0.091 290 2650 0.073 190 1860 0.064 120 1330 0.055 70
72730 0.104 280 2270 0.083 190 1590 0.073 120 1140 0.062 70
82390 0.117 280 1990 0.094 190 1390 0.082 110 1000 0.070 70
92120 0.130 280 1770 0.104 180 1240 0.091 110 880 0.078 70
10 1910 0.143 270 1590 0.114 180 1110 0.100 110 800 0.086 70
11 1740 0.156 270 1450 0.125 180 1010 0.109 110 720 0.094 70
12 1590 0.169 270 1330 0.135 180 930 0.118 110 660 0.101 70
13 1470 0.182 270 1220 0.146 180 860 0.127 110 610 0.109 70
14 1360 0.195 270 1140 0.156 180 800 0.137 110 570 0.117 70
15 1270 0.208 260 1060 0.166 180 740 0.146 110 530 0.125 70
16 1190 0.221 260 1000 0.177 180 700 0.155 110 500 0.133 70
Material Group
ISO 513 K1 K2 K3 K4
Hardness/Rm 150-250 HB 150-350 HB 120-260 HB 250-500 HB
Vc (m/min) 90-110 70-90 60-80 50-70
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
65310 0.140 740 4250 0.126 540 3720 0.112 420 3180 0.098 310
74550 0.160 730 3640 0.144 520 3180 0.128 410 2730 0.112 310
83980 0.180 720 3180 0.162 520 2790 0.144 400 2390 0.126 300
93540 0.200 710 2830 0.180 510 2480 0.160 400 2120 0.140 300
10 3180 0.220 700 2550 0.198 500 2230 0.176 390 1910 0.154 290
11 2900 0.240 700 2320 0.216 500 2030 0.192 390 1740 0.168 290
12 2650 0.260 690 2120 0.234 500 1860 0.208 390 1590 0.182 290
13 2450 0.280 690 1960 0.252 490 1710 0.224 380 1470 0.196 290
14 2270 0.300 680 1820 0.270 490 1590 0.240 380 1360 0.210 290
15 2120 0.320 680 1700 0.288 490 1490 0.256 380 1270 0.224 280
16 1990 0.340 680 1590 0.306 490 1390 0.272 380 1190 0.238 280
NC starting drills
202
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
LFTA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
C-SD-TA
CUTTING PARAMETERS
C-SD-TA
Material Group
ISO 513 N1 N2 N3 N4 N5
Hardness/Rm
Vc (m/min) 160-200 140-180 130-170 160-200
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
69550 0.175 1670 8490 0.158 1340 7960 0.140 1110 9550 0.158 1500
78190 0.200 1640 7280 0.180 1310 6820 0.160 1090 8190 0.180 1470
87170 0.225 1610 6370 0.203 1290 5970 0.180 1070 7170 0.203 1450
96370 0.250 1590 5660 0.225 1270 5310 0.200 1060 6370 0.225 1430
10 5730 0.275 1580 5100 0.248 1260 4780 0.220 1050 5730 0.248 1420
11 5210 0.300 1560 4630 0.270 1250 4340 0.240 1040 5210 0.270 1410
12 4780 0.325 1550 4250 0.293 1240 3980 0.260 1030 4780 0.293 1400
13 4410 0.350 1540 3920 0.315 1230 3670 0.280 1030 4410 0.315 1390
14 4090 0.375 1530 3640 0.338 1230 3410 0.300 1020 4090 0.338 1380
15 3820 0.400 1530 3400 0.360 1220 3180 0.320 1020 3820 0.360 1380
16 3580 0.425 1520 3180 0.383 1220 2990 0.340 1020 3580 0.383 1370
Material Group
ISO 513 S1 S2 S3 S4 S5
Hardness/Rm < 35 HRC 35-45 HRC
Vc (m/min) 30-50 20-40 45-65 35-55
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
62120 0.063 130 1590 0.044 70 2920 0.060 170 2390 0.050 120
71820 0.072 130 1360 0.050 70 2500 0.068 170 2050 0.058 120
81590 0.081 130 1190 0.057 70 2190 0.077 170 1790 0.065 120
91420 0.090 130 1060 0.063 70 1950 0.086 170 1590 0.072 110
10 1270 0.099 130 960 0.069 70 1750 0.094 160 1430 0.079 110
11 1160 0.108 130 870 0.076 70 1590 0.103 160 1300 0.086 110
12 1060 0.117 120 800 0.082 70 1460 0.111 160 1190 0.094 110
13 980 0.126 120 730 0.088 60 1350 0.120 160 1100 0.101 110
14 910 0.135 120 680 0.095 60 1250 0.128 160 1020 0.108 110
15 850 0.144 120 640 0.101 60 1170 0.137 160 960 0.115 110
16 800 0.153 120 600 0.107 60 1090 0.145 160 900 0.122 110
HSS DRILLS
CAPTION . 204
SELECTION GUIDE . 208
SYSTEM CHARTS . 210
LFTA . 213
SUTA . 223
DIN1897 . 234
DIN338 . 243
DIN340 . 272
DIN1869 . 279
DIN345 . 285
DIN341 . 292
DIN1870 . 294
Caption
Legenda Verzeichnis Légende Leyenda Условные обозначения
204
STOCK
h
stock standard
stock standard
Standard Lager
stock standard
stock estándar
складская позиция
f
non-standard stock
stock non standard
nicht Standard Lager
stock non standard
stock no estándar
не складская позиция
m
stock exhaustion
esaurimento stock
Vorraterschöpfung
épuisement du stock
agotamiento de stock
складские остатки
APPLICATION GUIDELINES INDICAZIONI PER L'APPLICAZIONE LEITFADEN ZUR ANWENDUNG
INDICATIONS POUR L’APPLICATION INDICACIONES PARA SU APLICACIÓN УКАЗАНИЯ ПО ПРИМЕНЕНИЮ
0
1st choice
1a scelta
1. Wahl
1er choix
1ª elección
1-й выбор
,
suitable
adatto
geeignet
adapté
adecuado
пригоден
SHANK ATTACCO SCHAFT QUEUE MANGO ХВОСТОВИК
cylindrical shank
attacco cilindrico
zylindrischer Schaft
queue cylindrique
mango cilíndrico
цилиндрическое крепление
Morse Taper shank
attacco Cono Morse
MK Schaft
queue conique
mango Cono Morse
конус Морзе
GEOMETRY GEOMETRIA GEOMETRIE GÉOMÉTRIE GEOMETRÍA ГЕОМЕТРИЯ
130° 35°÷40°
high performance, selfcentering
alto rendimento, autocentrante
hochleistung, selbstzentrierende
haute performance, auto centreur
alto rendimiento, autocentrante
высокопроизводительные, самоцентрующиеся
120°-130° 38°
for stainless steel and general application
per acciaio inossidabile e applicazioni generiche
für rostfreien Stahl und allgemeine Anwendung
pour acier inoxydable et applications génériques
para acero inoxidable y aplicaciones genéricas
для нержавеющих сталей и общего назначения
118° 25°÷30°
HSS general purpose
HSS uso generico
HSS allgemeine Anwendung
HSS applications génériques
HSS uso genérico
HSS общего назначения
118°
HSS Tin Pointed
135° 33°
HSS/Co Tin Pointed
Caption
Legenda Verzeichnis Légende Leyenda Условные обозначения
205
GEOMETRY GEOMETRIA GEOMETRIE GÉOMÉTRIE GEOMETRÍA ГЕОМЕТРИЯ
130° 33°
for stainless steel and general application
per acciaio inossidabile e applicazioni generiche
für rostfreien Stahl und allgemeine Anwendung
pour acier inoxydable et applications génériques
para acero inoxidable y aplicaciones genéricas
для нержавеющих сталей и общего назначения
130° 35°÷40°
for deep holes
per fori profondi
für tiefe Löcher
pour trous profonds
para agujeros profundos
для глубоких отверстий
118° 12°÷15°
for brass
per ottone
für Messing
pour laiton
para latón
для латуни
130° 35°÷40°
for aluminium
per alluminio
für Aluminium
pour aluminium
para aluminio
для алюминия
MATERIAL MATERIALE WERKSTOFF MATIÈRE MATERIAL МАТЕРИАЛ
high speed steel
acciaio super rapido
Hochleistungsschnellschnittstahl
acier rapide
acero súper rápido
быстрорежущая сталь
high speed steel - 5% ÷ 8% Co
acciaio super rapido - 5% ÷ 8% Co
Hochleistungsschnellschnittstahl - 5% ÷ 8% Co
acier rapide - 5% ÷ 8% Co
acero súper rápido - 5% ÷ 8% Co
быстрорежущая сталь - 5% ÷ 8% Co
HSS/Co + EV
SURFACE TREATMENT TRATTAMENTO SUPERFICIALE OBERFLÄCHENBEHANDLUNG
TRAITMENT DE SURFACE TRATAMIENTO SUPERFICIAL ОБРАБОТКА ПОВЕРХНОСТИ
...
BR
uncoated
non rivestito
unbeschichtet
non revêtu
no revestido
без покрытия
vaporization
vaporizzazione
Dämpfung
traitment vapeur
vaporización
окисление
heat treatment
trattamento termico
thermische Behandlung
traitment thermique
tratamiento térmico
термическая обработка
Caption
Legenda Verzeichnis Légende Leyenda Условные обозначения
206
COATINGS RIVESTIMENTI BESCHICHTUNGEN REVÊTEMENTS RECUBRIMIENTOS ПОКРЫТИЕ
hardness (HV)
durezza (HV)
Härte (HV)
dureté (HV)
dureza (HV)
твёрдость (HV)
2300 3300
TiAlN
+
WC/C
friction coefficient
coefficiente d’attrito
Reibungskoeffizient
coefficent de frottement
coeficiente de rozamiento
коэффициент трения
0.4 0.35 0.2
thickness (μ)
spessore (μ)
dicke (μ)
épaisseur (μ)
espesor (μ)
толщина (мкм)
1÷4 1÷5 2÷5
max working temperature (°C)
temperatura max (°C)
hochste Temperatur (°C)
température maximale (°C)
temperatura máx (°C)
макс. температура (°C)
600° 900° 1000°
Selection Guide
Indice grafico Auswahlhilfe Indice graphique Índice gráfico Руководство по выбору
208
ITEM No. PAGE
LFTA high performance
218LFTA 214
238LFTA 218
SUTA high perfromance
980SUTA 224
990SUTA 228
HSS-HSS/Co general purpose
118N 234
218NVA 239
1386STI 243
138N 248
138NTI 248
138HB 254
138WB 258
2386STI 262
238NVA 267
234NVA 272
234LS 276
234LSTH 276
2691LS 279
2691LSTH 279
1692LS 281
1693LS 283
145N 285
145NTI 285
245N 290
241LS 292
2701LS 294
2702LS 296
Selection Guide
Indice grafico Auswahlhilfe Indice graphique Índice gráfico Руководство по выбору
209
RANGE DRILLING
DEPTH NORM TYPE MATERIAL /
COATING HRC POINT
ANGLE
HELIX
ANGLE
CHAMFER
ISO P ISO M ISO K ISO N ISO S ISO H
2-20 extra short DIN1897 LF HSS/Co
PV10 130° 35°-40° +,+,
2-20 short DIN338 LF HSS/Co
PV10 130° 35°-40° +,+,
2-13 extra short OSAWA SU HSSE
PV10 120° 38° ++ +,
2-20 short OSAWA SU HSSE
PV10 120° 38° ++ +,
1-16 extra short DIN1897 N HSS
OX 118° 25°-30° +,
,
1-20 extra short DIN1897 NH HSS/Co
HT 130° 30° ++,,,
1-13 short DIN338 SPLIT
POINT
HSS
TiN 118° 30° +,+,,
0.2-20 short DIN338 N HSS
OX 118° 25°-30° +,,
1-16 short DIN338 N HSS
TiN 118° 25°-30° +,,
1.5-10 short DIN338 H HSS
BR 118° 12°-15° +
1.5-10 short DIN338 W HSS
BR 130° 35°-40° +
1-13 short DIN338 SPLIT
POINT
HSS/Co
TiN 135° 33° +++,,
1-20 short DIN338 NH HSS/Co
HT 130° 30° ++,,,
0.5-12 long DIN340 NH HSS/Co
HT 130° 30° ++,,,
2-13 long DIN340 LS HSS/Co
OX 130° 35°-40° +,+
2-13 long DIN340 LS HSS/Co
PV15 130° 35°-40° +,+
2-13 extra long DIN1869/1 LS HSS/Co
BR 130° 35°-40° +,+
2-13 extra long DIN1869/1 LS HSS/Co
PV15 130° 35°-40° +,+
3-12 extra long DIN1869/2 LS HSS
BR 130° 35°-40° ++
3.5-12 extra long DIN1869/3 LS HSS
BR 130° 35°-40° ++
5-60 short DIN345 N HSS
OX 118° 25°-30° +,,
13-30 short DIN345 N HSS
TiN 118° 25°-30° +,,
13-30 short DIN345 NH HSS/Co
OX 118° 30° ++,,,
13-30 long DIN341 LS HSS/Co
OX 130° 35°-40° +,+
13-30 extra long DIN1870/1 LS HSS/Co
OX 130° 35°-40° +,+
13-30 extra long DIN1870/2 LS HSS/Co
OX 130° 35°-40° +,+
+ 1st choice , suitable
System charts
Grafici applicativi Anwendungsgrafiken Graphiques d’application Gráficos aplicativos Диаграммы
210
ISO P
ISO M
Vc [m/min]
10 20 30 40
400
600
800
1000
1300
Rm [N/mm2]
Vc [m/min]
10 15 20 25
high
medium
high
medium
low
low
Machinability
medium
HSS+
HSS/Co+SU-TA+
HSS
LF-TA+
HSS/Co+
LF-TA,
SU-TA+
STEEL APPLICATION
STAINLESS STEEL APPLICATION
LFTA : high performance (page 213)
SUTA : high performance (page 223)
HSS-HSS/Co : general purpose (page 233)
+ 1st choice , suitable
+ 1st choice , suitable
System charts
Grafici applicativi Anwendungsgrafiken Graphiques d’application Gráficos aplicativos Диаграммы
211
ISO K
ISO N
LF-TA+
Vc [m/min]
10 20 30 40
100
200
300
400
HB hardness
HSS/Co+
Vc [m/min]
40 60 80 100
8
10
Si %
HSS/Co+
LF-TA,
SU-TA+
12
14
16
CAST IRON APPLICATION
NON-FERROUS MATERIALS APPLICATION
LFTA : high performance (page 213)
SUTA : high performance (page 223)
HSS-HSS/Co : general purpose (page 233)
+ 1st choice , suitable
+ 1st choice , suitable
System charts
Grafici applicativi Anwendungsgrafiken Graphiques d’application Gráficos aplicativos Диаграммы
212
ISO S
ISO
SUTA,
Vc [m/min]
6 9 12 15
10
15
20
30
HRC hardness
HSS/Co,
Vc
1122
4
5
HRC
HR
5
6
6
25
SUPER ALLOYS APPLICATION
SUTA : high performance (page 223)
HSS-HSS/Co : general purpose (page 233)
+ 1st choice , suitable
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
LFTA
LFTA
HIGH PERFORMANCE
High performance and self-centering geometry. Featuring
top quality HSS/Co+PV10 and very versatile cutting geometry,
enables outstanding performance on a wide range of materials.
Alto rendimento e affilatura autocentrante. Costruita con
HSS/Co+PV10 di alta qualità e caratterizzata da una geometria
di taglio molto versatile, garantisce elevate prestazioni su una
vasta gamma di materiali.
Hohe Leistungen und selbstzentrierende Schnittgeometrie.
Aus hervorragendem HSS/Co mit PV10 Beschichtung.
Dank der vielseitigen Geometrie, sind hohe Leistungen
auf einem sehr breiten Spektrum von Materialien
möglich.
Haute performance et affûtage auto-centré. Fabriquée
en HSS/Co+PV10 de la plus haute qualité et caractérisée
par une géométrie de coupe très polyvalente, elle garantit
des performances excellentes dans une grande variété de
matériaux.
Broca de alto rendimiento con afilado autocentrante.
Fabricada en HSS/Co con recubrimiento PV10, gracias a su
geometría de corte muy versátil, permite lograr un altísimo
rendimiento en una gama muy amplia de materiales.
Высокопроизводительная и самоцентрующаяся
геометрия. Использование HSS/Co высочайшего качества
с покрытием PV10 и универсальная геометрия, позволяет
получить повышенную производительность на широком
спектре обрабатываемых материалов.
LFTA - High performance drills
214
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
LFTA
h stock standard f non-standard stock m stock exhaustion
D(h8) D Tol. d(h7) l L PACKAGING EDP No. Stock
2.00 0/-0.014 2 12 38 5 P218LFTA0200 h
2.10 0/-0.014 2.1 12 38 5 P218LFTA0210 h
2.20 0/-0.014 2.2 13 40 5 P218LFTA0220 h
2.30 0/-0.014 2.3 13 40 5 P218LFTA0230 h
2.40 0/-0.014 2.4 14 43 5 P218LFTA0240 h
2.50 0/-0.014 2.5 14 43 5 P218LFTA0250 h
2.60 0/-0.014 2.6 14 43 5 P218LFTA0260 h
2.70 0/-0.014 2.7 16 46 5 P218LFTA0270 h
2.80 0/-0.014 2.8 16 46 5 P218LFTA0280 h
2.90 0/-0.014 2.9 16 46 5 P218LFTA0290 h
3.00 0/-0.014 3 16 46 5 P218LFTA0300 h
3.10 0/-0.018 3.1 18 49 5 P218LFTA0310 h
3.20 0/-0.018 3.2 18 49 5 P218LFTA0320 h
3.30 0/-0.018 3.3 18 49 5 P218LFTA0330 h
3.40 0/-0.018 3.4 20 52 5 P218LFTA0340 h
3.50 0/-0.018 3.5 20 52 5 P218LFTA0350 h
3.60 0/-0.018 3.6 20 52 5 P218LFTA0360 h
3.70 0/-0.018 3.7 20 52 5 P218LFTA0370 h
3.80 0/-0.018 3.8 22 55 5 P218LFTA0380 h
3.90 0/-0.018 3.9 22 55 5 P218LFTA0390 h
4.00 0/-0.018 4 22 55 5 P218LFTA0400 h
4.10 0/-0.018 4.1 22 55 5 P218LFTA0410 h
4.20 0/-0.018 4.2 22 55 5 P218LFTA0420 h
4.30 0/-0.018 4.3 24 58 5 P218LFTA0430 h
4.40 0/-0.018 4.4 24 58 5 P218LFTA0440 h
4.50 0/-0.018 4.5 24 58 5 P218LFTA0450 h
4.60 0/-0.018 4.6 24 58 5 P218LFTA0460 h
4.70 0/-0.018 4.7 24 58 5 P218LFTA0470 h
4.80 0/-0.018 4.8 26 62 5 P218LFTA0480 h
4.90 0/-0.018 4.9 26 62 5 P218LFTA0490 h
5.00 0/-0.018 5 26 62 5 P218LFTA0500 h
5.10 0/-0.018 5.1 26 62 5 P218LFTA0510 h
5.20 0/-0.018 5.2 26 62 5 P218LFTA0520 h
5.30 0/-0.018 5.3 26 62 5 P218LFTA0530 h
5.40 0/-0.018 5.4 28 66 5 P218LFTA0540 h
5.50 0/-0.018 5.5 28 66 5 P218LFTA0550 h
5.60 0/-0.018 5.6 28 66 5 P218LFTA0560 h
5.70 0/-0.018 5.7 28 66 5 P218LFTA0570 h
5.80 0/-0.018 5.8 28 66 5 P218LFTA0580 h
218LFTA
self-centering, general purpose, extra-short
DIN
1897
PMKNSH
+,+,
+ 1st choice , suitable
LFTA - High performance drills
215
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
LFTA
218LFTA
self-centering, general purpose, extra-short
DIN
1897
PMKNSH
+,+,
+ 1st choice , suitable
D(h8) D Tol. d(h7) l L PACKAGING EDP No. Stock
5.90 0/-0.018 5.9 28 66 5 P218LFTA0590 h
6.00 0/-0.018 6 28 66 5 P218LFTA0600 h
6.10 0/-0.022 6.1 31 70 5 P218LFTA0610 h
6.20 0/-0.022 6.2 31 70 5 P218LFTA0620 h
6.30 0/-0.022 6.3 31 70 5 P218LFTA0630 h
6.40 0/-0.022 6.4 31 70 5 P218LFTA0640 h
6.50 0/-0.022 6.5 31 70 5 P218LFTA0650 h
6.60 0/-0.022 6.6 31 70 5 P218LFTA0660 h
6.70 0/-0.022 6.7 31 70 5 P218LFTA0670 h
6.80 0/-0.022 6.8 34 74 5 P218LFTA0680 h
6.90 0/-0.022 6.9 34 74 5 P218LFTA0690 h
7.00 0/-0.022 7 34 74 5 P218LFTA0700 h
7.10 0/-0.022 7.1 34 74 5 P218LFTA0710 h
7.20 0/-0.022 7.2 34 74 5 P218LFTA0720 h
7.30 0/-0.022 7.3 34 74 5 P218LFTA0730 h
7.40 0/-0.022 7.4 34 74 5 P218LFTA0740 h
7.50 0/-0.022 7.5 34 74 5 P218LFTA0750 h
7.60 0/-0.022 7.6 37 79 5 P218LFTA0760 h
7.70 0/-0.022 7.7 37 79 5 P218LFTA0770 h
7.80 0/-0.022 7.8 37 79 5 P218LFTA0780 h
7.90 0/-0.022 7.9 37 79 5 P218LFTA0790 h
8.00 0/-0.022 8 37 79 5 P218LFTA0800 h
8.10 0/-0.022 8.1 37 79 5 P218LFTA0810 h
8.20 0/-0.022 8.2 37 79 5 P218LFTA0820 h
8.30 0/-0.022 8.3 37 79 5 P218LFTA0830 h
8.40 0/-0.022 8.4 37 79 5 P218LFTA0840 h
8.50 0/-0.022 8.5 37 79 5 P218LFTA0850 h
8.60 0/-0.022 8.6 40 84 5 P218LFTA0860 h
8.70 0/-0.022 8.7 40 84 5 P218LFTA0870 h
8.80 0/-0.022 8.8 40 84 5 P218LFTA0880 h
8.90 0/-0.022 8.9 40 84 5 P218LFTA0890 h
9.00 0/-0.022 9 40 84 5 P218LFTA0900 h
9.10 0/-0.022 9.1 40 84 5 P218LFTA0910 h
9.20 0/-0.022 9.2 40 84 5 P218LFTA0920 h
9.30 0/-0.022 9.3 40 84 5 P218LFTA0930 h
9.40 0/-0.022 9.4 40 84 5 P218LFTA0940 h
9.50 0/-0.022 9.5 40 84 5 P218LFTA0950 h
9.60 0/-0.022 9.6 43 89 5 P218LFTA0960 h
9.70 0/-0.022 9.7 43 89 5 P218LFTA0970 h
h stock standard f non-standard stock m stock exhaustion
LFTA - High performance drills
216
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
LFTA
218LFTA
self-centering, general purpose, extra-short
DIN
1897
PMKNSH
+,+,
+ 1st choice , suitable
D(h8) D Tol. d(h7) l L PACKAGING EDP No. Stock
9.80 0/-0.022 9.8 43 89 5 P218LFTA0980 h
9.90 0/-0.022 9.9 43 89 5 P218LFTA0990 h
10.00 0/-0.022 10 43 89 5 P218LFTA1000 h
10.20 0/-0.027 10.2 43 89 1 P218LFTA1020 h
10.30 0/-0.027 10.3 43 89 1 P218LFTA1030 h
10.50 0/-0.027 10.5 43 89 1 P218LFTA1050 h
10.80 0/-0.027 10.8 47 95 1 P218LFTA1080 h
11.00 0/-0.027 11 47 95 1 P218LFTA1100 h
11.20 0/-0.027 11.2 47 95 1 P218LFTA1120 h
11.30 0/-0.027 11.3 47 95 1 P218LFTA1130 h
11.50 0/-0.027 11.5 47 95 1 P218LFTA1150 h
11.80 0/-0.027 11.8 47 95 1 P218LFTA1180 h
12.00 0/-0.027 12 51 102 1 P218LFTA1200 h
12.20 0/-0.027 12.2 51 102 1 P218LFTA1220 h
12.50 0/-0.027 12.5 51 102 1 P218LFTA1250 h
12.80 0/-0.027 12.8 51 102 1 P218LFTA1280 h
13.00 0/-0.027 13 51 102 1 P218LFTA1300 h
13.30 0/-0.027 13.3 54 107 1 P218LFTA1330 h
13.50 0/-0.027 13.5 54 107 1 P218LFTA1350 h
13.80 0/-0.027 13.8 54 107 1 P218LFTA1380 h
14.00 0/-0.027 14 54 107 1 P218LFTA1400 h
14.50 0/-0.027 14.5 56 111 1 P218LFTA1450 h
14.80 0/-0.027 14.8 56 111 1 P218LFTA1480 h
15.00 0/-0.027 15 56 111 1 P218LFTA1500 h
15.30 0/-0.027 15.3 56 111 1 P218LFTA1530 h
15.50 0/-0.027 15.5 58 115 1 P218LFTA1550 h
15.80 0/-0.027 15.8 58 115 1 P218LFTA1580 h
16.00 0/-0.027 16 58 115 1 P218LFTA1600 h
16.50 0/-0.027 16.5 60 119 1 P218LFTA1650 h
17.00 0/-0.027 17 60 119 1 P218LFTA1700 h
17.50 0/-0.027 17.5 62 123 1 P218LFTA1750 h
18.00 0/-0.027 18 62 123 1 P218LFTA1800 h
18.50 0/-0.033 18.5 64 127 1 P218LFTA1850 h
19.00 0/-0.033 19 64 127 1 P218LFTA1900 h
19.50 0/-0.033 19.5 66 131 1 P218LFTA1950 h
20.00 0/-0.033 20 66 131 1 P218LFTA2000 h
h stock standard f non-standard stock m stock exhaustion
LFTA - High performance drills
217
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
LFTA
CUTTING PARAMETERS
218LFTA
Material Group
ISO 513 P1 P2 P3 P4 M1 M2
Hardness/Rm 500-700 N/mm² 600-1000 N/mm² < 750 N/mm²
Vc (m/min) 40-50 30-40 18-22
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
27170 0.060 430 5570 0.051 280 3180 0.042 130
34780 0.084 400 3720 0.071 270 2120 0.059 120
43580 0.108 390 2790 0.092 260 1590 0.076 120
52870 0.132 380 2230 0.112 250 1270 0.092 120
62390 0.156 370 1860 0.133 250 1060 0.109 120
72050 0.180 370 1590 0.153 240 910 0.126 110
81790 0.204 370 1390 0.173 240 800 0.143 110
91590 0.228 360 1240 0.194 240 710 0.160 110
10 1430 0.252 360 1110 0.214 240 640 0.176 110
11 1300 0.276 360 1010 0.235 240 580 0.179 100
12 1190 0.300 360 930 0.255 240 530 0.195 100
13 1100 0.324 360 860 0.275 240 490 0.204 100
14 1020 0.348 350 800 0.296 240 450 0.219 100
15 960 0.372 360 740 0.316 230 420 0.223 90
16 900 0.396 360 700 0.337 240 400 0.238 100
17 840 0.420 350 660 0.357 240 370 0.252 90
18 800 0.444 360 620 0.377 230 350 0.266 90
19 750 0.468 350 590 0.398 230 340 0.281 100
20 720 0.492 350 560 0.418 230 320 0.295 90
Material Group
ISO 513 K1 K2 N1 N2 N3 N4
Hardness/Rm 150-350 HB
Vc (m/min) 30-40 65-75 45-55
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
25570 0.057 320 11150 0.066 740 7960 0.060 480
33720 0.080 300 7430 0.092 690 5310 0.084 450
42790 0.103 290 5570 0.119 660 3980 0.108 430
52230 0.125 280 4460 0.145 650 3180 0.132 420
61860 0.148 280 3720 0.172 640 2650 0.156 410
71590 0.171 270 3180 0.198 630 2270 0.180 410
81390 0.194 270 2790 0.224 630 1990 0.204 410
91240 0.217 270 2480 0.251 620 1770 0.228 400
10 1110 0.239 270 2230 0.277 620 1590 0.252 400
11 1010 0.262 260 2030 0.304 620 1450 0.276 400
12 930 0.285 270 1860 0.330 610 1330 0.300 400
13 860 0.308 260 1710 0.356 610 1220 0.324 400
14 800 0.331 260 1590 0.383 610 1140 0.348 400
15 740 0.353 260 1490 0.409 610 1060 0.372 390
16 700 0.376 260 1390 0.436 610 1000 0.396 400
17 660 0.399 260 1310 0.462 610 940 0.420 390
18 620 0.422 260 1240 0.488 610 880 0.444 390
19 590 0.445 260 1170 0.515 600 840 0.468 390
20 560 0.467 260 1110 0.541 600 800 0.492 390
LFTA - High performance drills
218
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
LFTA
h stock standard f non-standard stock m stock exhaustion
238LFTA
self-centering, general purpose, short
DIN
338
PMKNSH
+,+,
+ 1st choice , suitable
D(h8) D Tol. d(h7) l L PACKAGING EDP No. Stock
2.00 0/-0.014 2 24 49 5 P238LFTA0200 h
2.10 0/-0.014 2.1 24 49 5 P238LFTA0210 h
2.20 0/-0.014 2.2 27 53 5 P238LFTA0220 h
2.30 0/-0.014 2.3 27 53 5 P238LFTA0230 h
2.40 0/-0.014 2.4 30 57 5 P238LFTA0240 h
2.50 0/-0.014 2.5 30 57 5 P238LFTA0250 h
2.60 0/-0.014 2.6 30 57 5 P238LFTA0260 h
2.70 0/-0.014 2.7 33 61 5 P238LFTA0270 h
2.80 0/-0.014 2.8 33 61 5 P238LFTA0280 h
2.90 0/-0.014 2.9 33 61 5 P238LFTA0290 h
3.00 0/-0.014 3 33 61 5 P238LFTA0300 h
3.10 0/-0.018 3.1 36 65 5 P238LFTA0310 h
3.20 0/-0.018 3.2 36 65 5 P238LFTA0320 h
3.30 0/-0.018 3.3 36 65 5 P238LFTA0330 h
3.40 0/-0.018 3.4 39 70 5 P238LFTA0340 h
3.50 0/-0.018 3.5 39 70 5 P238LFTA0350 h
3.60 0/-0.018 3.6 39 70 5 P238LFTA0360 h
3.70 0/-0.018 3.7 39 70 5 P238LFTA0370 h
3.80 0/-0.018 3.8 43 75 5 P238LFTA0380 h
3.90 0/-0.018 3.9 43 75 5 P238LFTA0390 h
4.00 0/-0.018 4 43 75 5 P238LFTA0400 h
4.10 0/-0.018 4.1 43 75 5 P238LFTA0410 h
4.20 0/-0.018 4.2 43 75 5 P238LFTA0420 h
4.30 0/-0.018 4.3 47 80 5 P238LFTA0430 h
4.40 0/-0.018 4.4 47 80 5 P238LFTA0440 h
4.50 0/-0.018 4.5 47 80 5 P238LFTA0450 h
4.60 0/-0.018 4.6 47 80 5 P238LFTA0460 h
4.70 0/-0.018 4.7 47 80 5 P238LFTA0470 h
4.80 0/-0.018 4.8 52 86 5 P238LFTA0480 h
4.90 0/-0.018 4.9 52 86 5 P238LFTA0490 h
5.00 0/-0.018 5 52 86 5 P238LFTA0500 h
5.10 0/-0.018 5.1 52 86 5 P238LFTA0510 h
5.20 0/-0.018 5.2 52 86 5 P238LFTA0520 h
5.30 0/-0.018 5.3 52 86 5 P238LFTA0530 h
5.40 0/-0.018 5.4 57 93 5 P238LFTA0540 h
5.50 0/-0.018 5.5 57 93 5 P238LFTA0550 h
5.60 0/-0.018 5.6 57 93 5 P238LFTA0560 h
5.70 0/-0.018 5.7 57 93 5 P238LFTA0570 h
5.80 0/-0.018 5.8 57 93 5 P238LFTA0580 h
h stock standard f non-standard stock m stock exhaustion
LFTA - High performance drills
219
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
LFTA
238LFTA
self-centering, general purpose, short
DIN
338
PMKNSH
+,+,
+ 1st choice , suitable
D(h8) D Tol. d(h7) l L PACKAGING EDP No. Stock
5.90 0/-0.018 5.9 57 93 5 P238LFTA0590 h
6.00 0/-0.018 6 57 93 5 P238LFTA0600 h
6.10 0/-0.022 6.1 63 101 1 P238LFTA0610 h
6.20 0/-0.022 6.2 63 101 1 P238LFTA0620 h
6.30 0/-0.022 6.3 63 101 1 P238LFTA0630 h
6.40 0/-0.022 6.4 63 101 1 P238LFTA0640 h
6.50 0/-0.022 6.5 63 101 1 P238LFTA0650 h
6.60 0/-0.022 6.6 63 101 1 P238LFTA0660 h
6.70 0/-0.022 6.7 63 101 1 P238LFTA0670 h
6.80 0/-0.022 6.8 69 109 1 P238LFTA0680 h
6.90 0/-0.022 6.9 69 109 1 P238LFTA0690 h
7.00 0/-0.022 7 69 109 1 P238LFTA0700 h
7.10 0/-0.022 7.1 69 109 1 P238LFTA0710 h
7.20 0/-0.022 7.2 69 109 1 P238LFTA0720 h
7.30 0/-0.022 7.3 69 109 1 P238LFTA0730 h
7.40 0/-0.022 7.4 69 109 1 P238LFTA0740 h
7.50 0/-0.022 7.5 69 109 1 P238LFTA0750 h
7.60 0/-0.022 7.6 75 117 1 P238LFTA0760 h
7.70 0/-0.022 7.7 75 117 1 P238LFTA0770 h
7.80 0/-0.022 7.8 75 117 1 P238LFTA0780 h
7.90 0/-0.022 7.9 75 117 1 P238LFTA0790 h
8.00 0/-0.022 8 75 117 1 P238LFTA0800 h
8.10 0/-0.022 8.1 75 117 1 P238LFTA0810 h
8.20 0/-0.022 8.2 75 117 1 P238LFTA0820 h
8.30 0/-0.022 8.3 75 117 1 P238LFTA0830 h
8.40 0/-0.022 8.4 75 117 1 P238LFTA0840 h
8.50 0/-0.022 8.5 75 117 1 P238LFTA0850 h
8.60 0/-0.022 8.6 81 125 1 P238LFTA0860 h
8.70 0/-0.022 8.7 81 125 1 P238LFTA0870 h
8.80 0/-0.022 8.8 81 125 1 P238LFTA0880 h
8.90 0/-0.022 8.9 81 125 1 P238LFTA0890 h
9.00 0/-0.022 9 81 125 1 P238LFTA0900 h
9.10 0/-0.022 9.1 81 125 1 P238LFTA0910 h
9.20 0/-0.022 9.2 81 125 1 P238LFTA0920 h
9.30 0/-0.022 9.3 81 125 1 P238LFTA0930 h
9.40 0/-0.022 9.4 81 125 1 P238LFTA0940 h
9.50 0/-0.022 9.5 81 125 1 P238LFTA0950 h
9.60 0/-0.022 9.6 87 133 1 P238LFTA0960 h
9.70 0/-0.022 9.7 87 133 1 P238LFTA0970 h
h stock standard f non-standard stock m stock exhaustion
LFTA - High performance drills
220
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
LFTA
238LFTA
self-centering, general purpose, short
DIN
338
PMKNSH
+,+,
+ 1st choice , suitable
D(h8) D Tol. d(h7) l L PACKAGING EDP No. Stock
9.80 0/-0.022 9.8 87 133 1 P238LFTA0980 h
9.90 0/-0.022 9.9 87 133 1 P238LFTA0990 h
10.00 0/-0.022 10 87 133 1 P238LFTA1000 h
10.20 0/-0.027 10.2 87 133 1 P238LFTA1020 h
10.30 0/-0.027 10.3 87 133 1 P238LFTA1030 h
10.50 0/-0.027 10.5 87 133 1 P238LFTA1050 h
10.80 0/-0.027 10.8 94 142 1 P238LFTA1080 h
11.00 0/-0.027 11 94 142 1 P238LFTA1100 h
11.20 0/-0.027 11.2 94 142 1 P238LFTA1120 h
11.30 0/-0.027 11.3 94 142 1 P238LFTA1130 h
11.50 0/-0.027 11.5 94 142 1 P238LFTA1150 h
11.80 0/-0.027 11.8 94 142 1 P238LFTA1180 h
12.00 0/-0.027 12 101 151 1 P238LFTA1200 h
12.20 0/-0.027 12.2 101 151 1 P238LFTA1220 h
12.50 0/-0.027 12.5 101 151 1 P238LFTA1250 h
12.80 0/-0.027 12.8 101 151 1 P238LFTA1280 h
13.00 0/-0.027 13 101 151 1 P238LFTA1300 h
13.30 0/-0.027 13.3 108 160 1 P238LFTA1330 h
13.50 0/-0.027 13.5 108 160 1 P238LFTA1350 h
13.80 0/-0.027 13.8 108 160 1 P238LFTA1380 h
14.00 0/-0.027 14 108 160 1 P238LFTA1400 h
14.50 0/-0.027 14.5 114 169 1 P238LFTA1450 h
14.80 0/-0.027 14.8 114 169 1 P238LFTA1480 h
15.00 0/-0.027 15 114 169 1 P238LFTA1500 h
15.30 0/-0.027 15.3 120 178 1 P238LFTA1530 h
15.50 0/-0.027 15.5 120 178 1 P238LFTA1550 h
15.80 0/-0.027 15.8 120 178 1 P238LFTA1580 h
16.00 0/-0.027 16 120 178 1 P238LFTA1600 h
16.50 0/-0.027 16.5 125 184 1 P238LFTA1650 h
17.00 0/-0.027 17 125 184 1 P238LFTA1700 h
17.50 0/-0.027 17.5 130 191 1 P238LFTA1750 h
18.00 0/-0.027 18 130 191 1 P238LFTA1800 h
18.50 0/-0.033 18.5 135 198 1 P238LFTA1850 h
19.00 0/-0.033 19 135 198 1 P238LFTA1900 h
19.50 0/-0.033 19.5 140 205 1 P238LFTA1950 h
20.00 0/-0.033 20 140 205 1 P238LFTA2000 h
h stock standard f non-standard stock m stock exhaustion
LFTA - High performance drills
221
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
SUTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
LFTA
CUTTING PARAMETERS
238LFTA
Material Group
ISO 513 P1 P2 P3 P4 M1 M2
Hardness/Rm 500-700 N/mm² 600-1000 N/mm² < 750 N/mm²
Vc (m/min) 30-40 20-30 14-18
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
25570 0.054 300 3980 0.046 180 2550 0.038 100
33720 0.076 280 2650 0.064 170 1700 0.053 90
42790 0.097 270 1990 0.083 160 1270 0.068 90
52230 0.119 260 1590 0.101 160 1020 0.083 80
61860 0.140 260 1330 0.119 160 850 0.098 80
71590 0.162 260 1140 0.138 160 730 0.113 80
81390 0.184 260 1000 0.156 160 640 0.129 80
91240 0.205 250 880 0.174 150 570 0.144 80
10 1110 0.227 250 800 0.193 150 510 0.159 80
11 1010 0.248 250 720 0.211 150 460 0.161 70
12 930 0.270 250 660 0.230 150 420 0.176 70
13 860 0.292 250 610 0.248 150 390 0.184 70
14 800 0.313 250 570 0.266 150 360 0.197 70
15 740 0.335 250 530 0.285 150 340 0.201 70
16 700 0.356 250 500 0.303 150 320 0.214 70
17 660 0.378 250 470 0.321 150 300 0.227 70
18 620 0.400 250 440 0.340 150 280 0.240 70
19 590 0.421 250 420 0.358 150 270 0.253 70
20 560 0.443 250 400 0.376 150 250 0.266 70
Material Group
ISO 513 K1 K2 N1 N2 N3 N4
Hardness/Rm 150-350 HB
Vc (m/min) 25-35 50-60 35-45
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
24780 0.051 250 8760 0.059 520 6370 0.054 340
33180 0.072 230 5840 0.083 490 4250 0.076 320
42390 0.092 220 4380 0.107 470 3180 0.097 310
51910 0.113 220 3500 0.131 460 2550 0.119 300
61590 0.133 210 2920 0.154 450 2120 0.140 300
71360 0.154 210 2500 0.178 450 1820 0.162 290
81190 0.174 210 2190 0.202 440 1590 0.184 290
91060 0.195 210 1950 0.226 440 1420 0.205 290
10 960 0.215 210 1750 0.249 440 1270 0.227 290
11 870 0.236 210 1590 0.273 430 1160 0.248 290
12 800 0.257 210 1460 0.297 430 1060 0.270 290
13 730 0.277 200 1350 0.321 430 980 0.292 290
14 680 0.298 200 1250 0.345 430 910 0.313 290
15 640 0.318 200 1170 0.368 430 850 0.335 280
16 600 0.339 200 1090 0.392 430 800 0.356 290
17 560 0.359 200 1030 0.416 430 750 0.378 280
18 530 0.380 200 970 0.440 430 710 0.400 280
19 500 0.400 200 920 0.463 430 670 0.421 280
20 480 0.421 200 880 0.487 430 640 0.443 280
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
SUTA
SUTA
HIGH PERFORMANCE
High performance and self-centering geometry.
Featuring premium HSSE+PV10 coating and special edge
design, enables very low cutting pressure and outstanding
performance on stainless steel, steel and non-ferrous
materials.
Alto rendimento e affilatura autocentrante. Costruita con
i migliori HSSE+PV10 e speciale geometria del tagliente,
garantisce un bassissimo sforzo di taglio e prestazioni
eccezionali nella foratura di acciaio inossidabile, acciaio e
materiali non ferrosi.
Hohe Leistungen und selbstzentrierende Schnittgeometrie.
Aus hervorragendem HSSE mit PV10 Beschichtung. Dank des
sehr geringen Schneiddrucks, sind unschlagbare Leistungen
auf rostfreien Stählen, Stählen und NE-Metall-Werkstoffe
möglich.
Haute performance et affûtage autocentré. Fabriquée
avec les meilleurs HSSE+PV10 et une géométrie spécifique
de l'arête, elle permet de minimiser les efforts de coupe
en garantissant des performances exceptionnelles dans le
perçage des aciers inoxydables, des aciers et des matériaux
non ferreux.
Broca de alto rendimiento con afilado autocentrante.
Fabricada en HSSE Premium con recubrimiento PV10 y
geometría especial, minimiza el esfuerzo de corte y permite
lograr un altísimo rendimiento en aceros inoxidables, aceros y
materiales no ferrosos.
Высокопроизводительная и самоцентрующаяся
геометрия. Высококачественная быстрорежущая сталь с
покрытием PV10 и специальная геометрия режущих кромок
обеспечивает низкие силы резания и непревзойденную
производительность при работе по нержавеющей стали,
конструкционной стали и цветным металлам.
SUTA - High performance drills
224
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
SUTA
h stock standard f non-standard stock m stock exhaustion
D(h8) D Tol. d(h7) l L PACKAGING EDP No. Stock
2.00 0/-0.014 2 12 44 1 P980SUTA0200 h
2.10 0/-0.014 2.1 12 44 1 P980SUTA0210 h
2.20 0/-0.014 2.2 13 45 1 P980SUTA0220 h
2.30 0/-0.014 2.3 13 45 1 P980SUTA0230 h
2.40 0/-0.014 2.4 14 46 1 P980SUTA0240 h
2.50 0/-0.014 2.5 14 46 1 P980SUTA0250 h
2.60 0/-0.014 2.6 14 46 1 P980SUTA0260 h
2.70 0/-0.014 2.7 16 48 1 P980SUTA0270 h
2.80 0/-0.014 2.8 16 48 1 P980SUTA0280 h
2.90 0/-0.014 2.9 16 48 1 P980SUTA0290 h
3.00 0/-0.014 3 16 48 1 P980SUTA0300 h
3.10 0/-0.018 3.1 18 50 1 P980SUTA0310 h
3.20 0/-0.018 3.2 18 50 1 P980SUTA0320 h
3.30 0/-0.018 3.3 18 50 1 P980SUTA0330 h
3.40 0/-0.018 3.4 20 52 1 P980SUTA0340 h
3.50 0/-0.018 3.5 20 52 1 P980SUTA0350 h
3.60 0/-0.018 3.6 20 52 1 P980SUTA0360 h
3.70 0/-0.018 3.7 20 52 1 P980SUTA0370 h
3.80 0/-0.018 3.8 22 54 1 P980SUTA0380 h
3.90 0/-0.018 3.9 22 54 1 P980SUTA0390 h
4.00 0/-0.018 4 22 54 1 P980SUTA0400 h
4.10 0/-0.018 4.1 22 66 1 P980SUTA0410 h
4.20 0/-0.018 4.2 22 66 1 P980SUTA0420 h
4.30 0/-0.018 4.3 24 68 1 P980SUTA0430 h
4.40 0/-0.018 4.4 24 68 1 P980SUTA0440 h
4.50 0/-0.018 4.5 24 68 1 P980SUTA0450 h
4.60 0/-0.018 4.6 24 68 1 P980SUTA0460 h
4.70 0/-0.018 4.7 24 68 1 P980SUTA0470 h
4.80 0/-0.018 4.8 26 70 1 P980SUTA0480 h
4.90 0/-0.018 4.9 26 70 1 P980SUTA0490 h
5.00 0/-0.018 5 26 70 1 P980SUTA0500 h
5.10 0/-0.018 5.1 26 70 1 P980SUTA0510 h
5.20 0/-0.018 5.2 26 70 1 P980SUTA0520 h
5.30 0/-0.018 5.3 26 70 1 P980SUTA0530 h
5.40 0/-0.018 5.4 28 72 1 P980SUTA0540 h
5.50 0/-0.018 5.5 28 72 1 P980SUTA0550 h
5.60 0/-0.018 5.6 28 72 1 P980SUTA0560 h
5.70 0/-0.018 5.7 28 72 1 P980SUTA0570 h
5.80 0/-0.018 5.8 28 72 1 P980SUTA0580 h
980SUTA
self centering, stainless steel, extra-short
OSAWA
NORM
PMKNSH
++ +,
+ 1st choice , suitable
SUTA - High performance drills
225
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
SUTA
980SUTA
self centering, stainless steel, extra-short
OSAWA
NORM
PMKNSH
++ +,
+ 1st choice , suitable
D(h8) D Tol. d(h7) l L PACKAGING EDP No. Stock
5.90 0/-0.018 5.9 28 72 1 P980SUTA0590 h
6.00 0/-0.018 6 28 72 1 P980SUTA0600 h
6.10 0/-0.022 6.1 31 75 1 P980SUTA0610 h
6.20 0/-0.022 6.2 31 75 1 P980SUTA0620 h
6.30 0/-0.022 6.3 31 75 1 P980SUTA0630 h
6.40 0/-0.022 6.4 31 75 1 P980SUTA0640 h
6.50 0/-0.022 6.5 31 75 1 P980SUTA0650 h
6.60 0/-0.022 6.6 31 75 1 P980SUTA0660 h
6.70 0/-0.022 6.7 31 75 1 P980SUTA0670 h
6.80 0/-0.022 6.8 34 78 1 P980SUTA0680 h
6.90 0/-0.022 6.9 34 78 1 P980SUTA0690 h
7.00 0/-0.022 7 34 78 1 P980SUTA0700 h
7.10 0/-0.022 7.1 34 78 1 P980SUTA0710 h
7.20 0/-0.022 7.2 34 78 1 P980SUTA0720 h
7.30 0/-0.022 7.3 34 78 1 P980SUTA0730 h
7.40 0/-0.022 7.4 34 78 1 P980SUTA0740 h
7.50 0/-0.022 7.5 34 78 1 P980SUTA0750 h
7.60 0/-0.022 7.6 37 81 1 P980SUTA0760 h
7.70 0/-0.022 7.7 37 81 1 P980SUTA0770 h
7.80 0/-0.022 7.8 37 81 1 P980SUTA0780 h
7.90 0/-0.022 7.9 37 81 1 P980SUTA0790 h
8.00 0/-0.022 8 37 81 1 P980SUTA0800 h
8.10 0/-0.022 8.1 37 87 1 P980SUTA0810 h
8.20 0/-0.022 8.2 37 87 1 P980SUTA0820 h
8.30 0/-0.022 8.3 37 87 1 P980SUTA0830 h
8.40 0/-0.022 8.4 37 87 1 P980SUTA0840 h
8.50 0/-0.022 8.5 37 87 1 P980SUTA0850 h
8.60 0/-0.022 8.6 40 90 1 P980SUTA0860 h
8.70 0/-0.022 8.7 40 90 1 P980SUTA0870 h
8.80 0/-0.022 8.8 40 90 1 P980SUTA0880 h
8.90 0/-0.022 8.9 40 90 1 P980SUTA0890 h
9.00 0/-0.022 9 40 90 1 P980SUTA0900 h
9.10 0/-0.022 9.1 40 90 1 P980SUTA0910 h
9.20 0/-0.022 9.2 40 90 1 P980SUTA0920 h
9.30 0/-0.022 9.3 40 90 1 P980SUTA0930 h
9.40 0/-0.022 9.4 40 90 1 P980SUTA0940 h
9.50 0/-0.022 9.5 40 90 1 P980SUTA0950 h
9.60 0/-0.022 9.6 43 93 1 P980SUTA0960 h
9.70 0/-0.022 9.7 43 93 1 P980SUTA0970 h
h stock standard f non-standard stock m stock exhaustion
SUTA - High performance drills
226
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
SUTA
980SUTA
self centering, stainless steel, extra-short
OSAWA
NORM
PMKNSH
++ +,
+ 1st choice , suitable
D(h8) D Tol. d(h7) l L PACKAGING EDP No. Stock
9.80 0/-0.022 9.8 43 93 1 P980SUTA0980 h
9.90 0/-0.022 9.9 43 93 1 P980SUTA0990 h
10.00 0/-0.022 10 43 93 1 P980SUTA1000 h
10.10 0/-0.022 10.1 43 100 1 P980SUTA1010 h
10.20 0/-0.022 10.2 43 100 1 P980SUTA1020 h
10.30 0/-0.022 10.3 43 100 1 P980SUTA1030 h
10.40 0/-0.022 10.4 43 100 1 P980SUTA1040 h
10.50 0/-0.022 10.5 43 100 1 P980SUTA1050 h
10.60 0/-0.022 10.6 43 100 1 P980SUTA1060 h
10.70 0/-0.022 10.7 47 104 1 P980SUTA1070 h
10.80 0/-0.022 10.8 47 104 1 P980SUTA1080 h
10.90 0/-0.022 10.9 47 104 1 P980SUTA1090 h
11.00 0/-0.022 11 47 104 1 P980SUTA1100 h
11.10 0/-0.022 11.1 47 104 1 P980SUTA1110 h
11.20 0/-0.022 11.2 47 104 1 P980SUTA1120 h
11.30 0/-0.022 11.3 47 104 1 P980SUTA1130 h
11.40 0/-0.022 11.4 47 104 1 P980SUTA1140 h
11.50 0/-0.022 11.5 47 104 1 P980SUTA1150 h
11.60 0/-0.022 11.6 47 104 1 P980SUTA1160 h
11.70 0/-0.022 11.7 47 104 1 P980SUTA1170 h
11.80 0/-0.022 11.8 47 104 1 P980SUTA1180 h
11.90 0/-0.022 11.9 51 108 1 P980SUTA1190 h
12.00 0/-0.022 12 51 108 1 P980SUTA1200 h
12.10 0/-0.022 12.1 51 108 1 P980SUTA1210 h
12.20 0/-0.022 12.2 51 108 1 P980SUTA1220 h
12.30 0/-0.022 12.3 51 108 1 P980SUTA1230 h
12.40 0/-0.022 12.4 51 108 1 P980SUTA1240 h
12.50 0/-0.022 12.5 51 108 1 P980SUTA1250 h
12.60 0/-0.022 12.6 51 108 1 P980SUTA1260 h
12.70 0/-0.022 12.7 51 108 1 P980SUTA1270 h
12.80 0/-0.022 12.8 51 108 1 P980SUTA1280 h
12.90 0/-0.022 12.9 51 108 1 P980SUTA1290 h
13.00 0/-0.022 13 51 108 1 P980SUTA1300 h
h stock standard f non-standard stock m stock exhaustion
SUTA - High performance drills
227
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
SUTA
CUTTING PARAMETERS
980SUTA
Material Group
ISO 513 P1 P2 M1 M2 M3
Hardness/Rm 500-700 N/mm² < 750 N/mm² 550-850 N/mm²
Vc (m/min) 35-45 18-22 12-16
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
26370 0.060 380 3180 0.060 190 2230 0.042 90
34250 0.080 340 2120 0.080 170 1490 0.056 80
43180 0.100 320 1590 0.100 160 1110 0.070 80
52550 0.120 310 1270 0.120 150 890 0.084 70
62120 0.140 300 1060 0.140 150 740 0.098 70
71820 0.160 290 910 0.160 150 640 0.112 70
81590 0.180 290 800 0.180 140 560 0.126 70
91420 0.200 280 710 0.200 140 500 0.140 70
10 1270 0.230 290 640 0.230 150 450 0.161 70
11 1160 0.260 300 580 0.260 150 410 0.169 70
12 1060 0.300 320 530 0.300 160 370 0.195 70
13 980 0.340 330 490 0.340 170 340 0.221 80
14 910 0.360 330 450 0.360 160 320 0.234 70
15 850 0.380 320 420 0.380 160 300 0.247 70
16 800 0.400 320 400 0.400 160 280 0.260 70
17 750 0.425 320 370 0.425 160 260 0.276 70
18 710 0.450 320 350 0.450 160 250 0.293 70
19 670 0.460 310 340 0.460 160 230 0.299 70
20 640 0.470 300 320 0.470 150 220 0.306 70
Material Group
ISO 513 N1 N2 N4 N3 S1 S2 S4
Hardness/Rm < 30 HRC
Vc (m/min) 60-80 30-40 8-12 12-16
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
211150 0.066 740 5570 0.051 280 1590 0.024 38 2230 0.042 90
37430 0.088 650 3720 0.068 250 1060 0.032 34 1490 0.056 80
45570 0.120 670 2790 0.085 240 800 0.040 32 1110 0.070 80
54460 0.144 640 2230 0.102 230 640 0.060 38 890 0.084 70
63720 0.182 680 1860 0.119 220 530 0.070 37 740 0.098 70
73180 0.208 660 1590 0.136 220 450 0.096 43 640 0.128 80
82790 0.252 700 1390 0.153 210 400 0.108 43 560 0.144 80
92480 0.280 690 1240 0.170 210 350 0.120 42 500 0.160 80
10 2230 0.322 720 1110 0.196 220 320 0.138 44 450 0.184 80
11 2030 0.364 740 1010 0.221 220 290 0.156 45 410 0.208 90
12 1860 0.420 780 930 0.255 240 270 0.180 49 370 0.240 90
13 1710 0.476 810 860 0.289 250 240 0.204 49 340 0.272 90
14 1590 0.504 800 800 0.306 240 230 0.216 50 320 0.288 90
15 1490 0.532 790 740 0.323 240 210 0.228 48 300 0.304 90
16 1390 0.560 780 700 0.340 240 200 0.240 48 280 0.320 90
17 1310 0.595 780 660 0.361 240 190 0.255 48 260 0.340 90
18 1240 0.630 780 620 0.383 240 180 0.270 49 250 0.360 90
19 1170 0.644 750 590 0.391 230 170 0.276 47 230 0.368 80
20 1110 0.658 730 560 0.400 220 160 0.282 45 220 0.376 80
SUTA - High performance drills
228
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
SUTA
h stock standard f non-standard stock m stock exhaustion
990SUTA
self centering, stainless steel, short
OSAWA
NORM
PMKNSH
++ +,
+ 1st choice , suitable
D(h8) D Tol. d(h7) l L PACKAGING EDP No. Stock
2.00 0/-0.014 2 24 56 1 P990SUTA0200 h
2.10 0/-0.014 2.1 24 56 1 P990SUTA0210 h
2.20 0/-0.014 2.2 27 59 1 P990SUTA0220 h
2.30 0/-0.014 2.3 27 59 1 P990SUTA0230 h
2.40 0/-0.014 2.4 30 62 1 P990SUTA0240 h
2.50 0/-0.014 2.5 30 62 1 P990SUTA0250 h
2.60 0/-0.014 2.6 30 62 1 P990SUTA0260 h
2.70 0/-0.014 2.7 33 65 1 P990SUTA0270 h
2.80 0/-0.014 2.8 33 65 1 P990SUTA0280 h
2.90 0/-0.014 2.9 33 65 1 P990SUTA0290 h
3.00 0/-0.014 3 33 65 1 P990SUTA0300 h
3.10 0/-0.018 3.1 36 68 1 P990SUTA0310 h
3.20 0/-0.018 3.2 36 68 1 P990SUTA0320 h
3.30 0/-0.018 3.3 36 68 1 P990SUTA0330 h
3.40 0/-0.018 3.4 39 71 1 P990SUTA0340 h
3.50 0/-0.018 3.5 39 71 1 P990SUTA0350 h
3.60 0/-0.018 3.6 39 71 1 P990SUTA0360 h
3.70 0/-0.018 3.7 39 71 1 P990SUTA0370 h
3.80 0/-0.018 3.8 43 75 1 P990SUTA0380 h
3.90 0/-0.018 3.9 43 75 1 P990SUTA0390 h
4.00 0/-0.018 4 43 75 1 P990SUTA0400 h
4.10 0/-0.018 4.1 43 87 1 P990SUTA0410 h
4.20 0/-0.018 4.2 43 87 1 P990SUTA0420 h
4.30 0/-0.018 4.3 47 91 1 P990SUTA0430 h
4.40 0/-0.018 4.4 47 91 1 P990SUTA0440 h
4.50 0/-0.018 4.5 47 91 1 P990SUTA0450 h
4.60 0/-0.018 4.6 47 91 1 P990SUTA0460 h
4.70 0/-0.018 4.7 47 91 1 P990SUTA0470 h
4.80 0/-0.018 4.8 52 96 1 P990SUTA0480 h
4.90 0/-0.018 4.9 52 96 1 P990SUTA0490 h
5.00 0/-0.018 5 52 96 1 P990SUTA0500 h
5.10 0/-0.018 5.1 52 96 1 P990SUTA0510 h
5.20 0/-0.018 5.2 52 96 1 P990SUTA0520 h
5.30 0/-0.018 5.3 52 96 1 P990SUTA0530 h
5.40 0/-0.018 5.4 57 101 1 P990SUTA0540 h
5.50 0/-0.018 5.5 57 101 1 P990SUTA0550 h
5.60 0/-0.018 5.6 57 101 1 P990SUTA0560 h
5.70 0/-0.018 5.7 57 101 1 P990SUTA0570 h
5.80 0/-0.018 5.8 57 101 1 P990SUTA0580 h
h stock standard f non-standard stock m stock exhaustion
SUTA - High performance drills
229
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
SUTA
990SUTA
self centering, stainless steel, short
OSAWA
NORM
PMKNSH
+0 +,
+ 1st choice , suitable
D(h8) D Tol. d(h7) l L PACKAGING EDP No. Stock
5.90 0/-0.018 5.9 57 101 1 P990SUTA0590 h
6.00 0/-0.018 6 57 101 1 P990SUTA0600 h
6.10 0/-0.022 6.1 63 107 1 P990SUTA0610 h
6.20 0/-0.022 6.2 63 107 1 P990SUTA0620 h
6.30 0/-0.022 6.3 63 107 1 P990SUTA0630 h
6.40 0/-0.022 6.4 63 107 1 P990SUTA0640 h
6.50 0/-0.022 6.5 63 107 1 P990SUTA0650 h
6.60 0/-0.022 6.6 63 107 1 P990SUTA0660 h
6.70 0/-0.022 6.7 63 107 1 P990SUTA0670 h
6.80 0/-0.022 6.8 69 113 1 P990SUTA0680 h
6.90 0/-0.022 6.9 69 113 1 P990SUTA0690 h
7.00 0/-0.022 7 69 113 1 P990SUTA0700 h
7.10 0/-0.022 7.1 69 113 1 P990SUTA0710 h
7.20 0/-0.022 7.2 69 113 1 P990SUTA0720 h
7.30 0/-0.022 7.3 69 113 1 P990SUTA0730 h
7.40 0/-0.022 7.4 69 113 1 P990SUTA0740 h
7.50 0/-0.022 7.5 69 113 1 P990SUTA0750 h
7.60 0/-0.022 7.6 75 119 1 P990SUTA0760 h
7.70 0/-0.022 7.7 75 119 1 P990SUTA0770 h
7.80 0/-0.022 7.8 75 119 1 P990SUTA0780 h
7.90 0/-0.022 7.9 75 119 1 P990SUTA0790 h
8.00 0/-0.022 8 75 119 1 P990SUTA0800 h
8.10 0/-0.022 8.1 75 125 1 P990SUTA0810 h
8.20 0/-0.022 8.2 75 125 1 P990SUTA0820 h
8.30 0/-0.022 8.3 75 125 1 P990SUTA0830 h
8.40 0/-0.022 8.4 75 125 1 P990SUTA0840 h
8.50 0/-0.022 8.5 75 125 1 P990SUTA0850 h
8.60 0/-0.022 8.6 81 131 1 P990SUTA0860 h
8.70 0/-0.022 8.7 81 131 1 P990SUTA0870 h
8.80 0/-0.022 8.8 81 131 1 P990SUTA0880 h
8.90 0/-0.022 8.9 81 131 1 P990SUTA0890 h
9.00 0/-0.022 9 81 131 1 P990SUTA0900 h
9.10 0/-0.022 9.1 81 131 1 P990SUTA0910 h
9.20 0/-0.022 9.2 81 131 1 P990SUTA0920 h
9.30 0/-0.022 9.3 81 131 1 P990SUTA0930 h
9.40 0/-0.022 9.4 81 131 1 P990SUTA0940 h
9.50 0/-0.022 9.5 81 131 1 P990SUTA0950 h
9.60 0/-0.022 9.6 87 137 1 P990SUTA0960 h
9.70 0/-0.022 9.7 87 137 1 P990SUTA0970 h
h stock standard f non-standard stock m stock exhaustion
SUTA - High performance drills
230
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
SUTA
990SUTA
self centering, stainless steel, short
OSAWA
NORM
PMKNSH
+0 +,
+ 1st choice , suitable
D(h8) D Tol. d(h7) l L PACKAGING EDP No. Stock
9.80 0/-0.022 9.8 87 137 1 P990SUTA0980 h
9.90 0/-0.022 9.9 87 137 1 P990SUTA0990 h
10.00 0/-0.022 10 87 137 1 P990SUTA1000 h
10.10 0/-0.027 10.1 87 144 1 P990SUTA1010 h
10.20 0/-0.027 10.2 87 144 1 P990SUTA1020 h
10.30 0/-0.027 10.3 87 144 1 P990SUTA1030 h
10.40 0/-0.027 10.4 87 144 1 P990SUTA1040 h
10.50 0/-0.027 10.5 87 144 1 P990SUTA1050 h
10.60 0/-0.027 10.6 87 144 1 P990SUTA1060 h
10.70 0/-0.027 10.7 94 151 1 P990SUTA1070 h
10.80 0/-0.027 10.8 94 151 1 P990SUTA1080 h
10.90 0/-0.027 10.9 94 151 1 P990SUTA1090 h
11.00 0/-0.027 11 94 151 1 P990SUTA1100 h
11.10 0/-0.027 11.1 94 151 1 P990SUTA1110 h
11.20 0/-0.027 11.2 94 151 1 P990SUTA1120 h
11.30 0/-0.027 11.3 94 151 1 P990SUTA1130 h
11.40 0/-0.027 11.4 94 151 1 P990SUTA1140 h
11.50 0/-0.027 11.5 94 151 1 P990SUTA1150 h
11.60 0/-0.027 11.6 94 151 1 P990SUTA1160 h
11.70 0/-0.027 11.7 94 151 1 P990SUTA1170 h
11.80 0/-0.027 11.8 94 151 1 P990SUTA1180 h
11.90 0/-0.027 11.9 101 158 1 P990SUTA1190 h
12.00 0/-0.027 12 101 158 1 P990SUTA1200 h
12.10 0/-0.027 12.1 101 158 1 P990SUTA1210 h
12.20 0/-0.027 12.2 101 158 1 P990SUTA1220 h
12.30 0/-0.027 12.3 101 158 1 P990SUTA1230 h
12.40 0/-0.027 12.4 101 158 1 P990SUTA1240 h
12.50 0/-0.027 12.5 101 158 1 P990SUTA1250 h
12.60 0/-0.027 12.6 101 158 1 P990SUTA1260 h
12.70 0/-0.027 12.7 101 158 1 P990SUTA1270 h
12.80 0/-0.027 12.8 101 158 1 P990SUTA1280 h
12.90 0/-0.027 12.9 101 158 1 P990SUTA1290 h
13.00 0/-0.027 13 101 158 1 P990SUTA1300 h
13.50 0/-0.027 13.5 106 166 1 P990SUTA1350 h
14.00 0/-0.027 14 106 166 1 P990SUTA1400 h
14.10 0/-0.027 14.1 109 169 1 P990SUTA1410 h
14.50 0/-0.027 14.5 109 169 1 P990SUTA1450 h
15.00 0/-0.027 15 109 169 1 P990SUTA1500 h
15.50 0/-0.027 15.5 112 172 1 P990SUTA1550 h
h stock standard f non-standard stock m stock exhaustion
SUTA - High performance drills
231
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
SUTA
990SUTA
self centering, stainless steel, short
OSAWA
NORM
PMKNSH
+0 +,
+ 1st choice , suitable
D(h8) D Tol. d(h7) l L PACKAGING EDP No. Stock
15.60 0/-0.027 15.6 112 172 1 P990SUTA1560 h
16.00 0/-0.027 16 112 172 1 P990SUTA1600 h
16.50 0/-0.027 16.5 115 181 1 P990SUTA1650 h
17.00 0/-0.027 17 115 181 1 P990SUTA1700 h
17.50 0/-0.027 17.5 118 184 1 P990SUTA1750 h
17.6 0/-0.027 17.6 118 184 1 P990SUTA1760 h
18.00 0/-0.027 18 118 184 1 P990SUTA1800 h
18.50 0/-0.033 18.5 122 188 1 P990SUTA1850 h
19.00 0/-0.033 19 122 188 1 P990SUTA1900 h
19.50 0/-0.033 19.5 125 191 1 P990SUTA1950 h
20.00 0/-0.033 20 125 191 1 P990SUTA2000 h
h stock standard f non-standard stock m stock exhaustion
SUTA - High performance drills
232
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
HSS-HSS/CO
DRILLS
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
SUTA
CUTTING PARAMETERS
990SUTA
Material Group
ISO 513 P1 P2 M1 M2 M3
Hardness/Rm 500-700 N/mm² < 750 N/mm² 550-850 N/mm²
Vc (m/min) 35-45 18-22 12-16
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
26370 0.057 360 3180 0.057 180 2230 0.040 90
34250 0.076 320 2120 0.076 160 1490 0.053 80
43180 0.095 300 1590 0.095 150 1110 0.067 70
52550 0.114 290 1270 0.114 140 890 0.080 70
62120 0.133 280 1060 0.133 140 740 0.093 70
71820 0.152 280 910 0.152 140 640 0.106 70
81590 0.171 270 800 0.171 140 560 0.120 70
91420 0.190 270 710 0.190 130 500 0.133 70
10 1270 0.219 280 640 0.219 140 450 0.153 70
11 1160 0.247 290 580 0.247 140 410 0.161 70
12 1060 0.285 300 530 0.285 150 370 0.185 70
13 980 0.323 320 490 0.323 160 340 0.203 70
14 910 0.342 310 450 0.342 150 320 0.215 70
15 850 0.361 310 420 0.361 150 300 0.217 60
16 800 0.380 300 400 0.380 150 280 0.228 60
17 750 0.404 300 370 0.404 150 260 0.242 60
18 710 0.428 300 350 0.428 150 250 0.257 60
19 670 0.437 290 340 0.437 150 230 0.262 60
20 640 0.447 290 320 0.447 140 220 0.268 60
Material Group
ISO 513 N1 N2 N3 N4 S1 S2 S4
Hardness/Rm < 30 HRC
Vc (m/min) 60-80 30-40 8-12 12-16
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
211150 0.063 700 5570 0.048 270 1590 0.023 36 2230 0.040 90
37430 0.084 620 3720 0.065 240 1060 0.030 32 1490 0.053 80
45570 0.105 580 2790 0.081 230 800 0.038 30 1110 0.067 70
54460 0.125 560 2230 0.097 220 640 0.057 36 890 0.080 70
63720 0.146 540 1860 0.113 210 530 0.067 35 740 0.093 70
73180 0.167 530 1590 0.129 210 450 0.091 41 640 0.122 80
82790 0.188 520 1390 0.145 200 400 0.103 41 560 0.137 80
92480 0.209 520 1240 0.162 200 350 0.114 40 500 0.152 80
10 2230 0.240 540 1110 0.186 210 320 0.131 42 450 0.175 80
11 2030 0.272 550 1010 0.210 210 290 0.148 43 410 0.198 80
12 1860 0.314 580 930 0.242 230 270 0.171 46 370 0.228 80
13 1710 0.355 610 860 0.275 240 240 0.194 47 340 0.258 90
14 1590 0.376 600 800 0.291 230 230 0.205 47 320 0.274 90
15 1490 0.397 590 740 0.307 230 210 0.217 45 300 0.289 90
16 1390 0.418 580 700 0.323 230 200 0.228 46 280 0.304 90
17 1310 0.444 580 660 0.343 230 190 0.242 46 260 0.323 80
18 1240 0.470 580 620 0.363 230 180 0.257 46 250 0.342 90
19 1170 0.481 560 590 0.371 220 170 0.262 45 230 0.350 80
20 1110 0.491 550 560 0.380 210 160 0.268 43 220 0.357 80
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
HSS-HSS/CO
GENERAL PURPOSE
A wide variety of geometries and standards, as well as a
profitable mix of performance and price.
Un’ampia varietà di geometrie e standard costruttivi,
con una vantaggiosa combinazione di rendimento e
convenienza, sono i punti di forza delle punte in HSS e HSS/Co
Osawa.
Die breite Palette an Geometrien und genormten Baumaßen
bieten eine außergewöhnlich vorteilhafte Verbindung von Preis
und Leistung: unschlagbare Stärken der Osawa Bohrer aus HSS
und HSS/Co.
La gamme de forets HSS et HSS/Co Osawa offre une
grande variété de géométries standards permettant
une combinaison très rentable de performance et de
prix.
Una amplia variedad de geometrías y estándares de
fabricación, y una ventajosa combinación de rendimiento y
conveniencia, son los puntos de fuerza de las brocas HSS y
HSS/Co Osawa.
Исходный материал наивысшего качества в комбинации
с современным покрытием и специальной геометрией.
Отличное сочетание производительности и стоимости.
HSS and HSS/Co drills
234
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
h stock standard f non-standard stock m stock exhaustion
D(h8) D Tol. d l L PACKAGING EDP No. Stock
1.00 0/-0.014 1 6 26 10 P118NB0100 h
1.10 0/-0.014 1.1 7 28 10 P118NB0110 h
1.20 0/-0.014 1.2 8 30 10 P118NB0120 h
1.25 0/-0.014 1.25 8 30 10 P118NB0125 h
1.30 0/-0.014 1.3 8 30 10 P118NB0130 h
1.40 0/-0.014 1.4 9 32 10 P118NB0140 h
1.50 0/-0.014 1.5 9 32 10 P118NB0150 h
1.60 0/-0.014 1.6 10 34 10 P118NB0160 h
1.70 0/-0.014 1.7 10 34 10 P118NB0170 h
1.75 0/-0.014 1.75 11 36 10 P118NB0175 h
1.80 0/-0.014 1.8 11 36 10 P118NB0180 h
1.90 0/-0.014 1.9 11 36 10 P118NB0190 h
2.00 0/-0.014 2 12 38 10 P118N0200 h
2.10 0/-0.014 2.1 12 38 10 P118N0210 h
2.20 0/-0.014 2.2 13 40 10 P118N0220 h
2.25 0/-0.014 2.25 13 40 10 P118N0225 h
2.30 0/-0.014 2.3 13 40 10 P118N0230 h
2.40 0/-0.014 2.4 14 43 10 P118N0240 h
2.50 0/-0.014 2.5 14 43 10 P118N0250 h
2.60 0/-0.014 2.6 14 43 10 P118N0260 h
2.70 0/-0.014 2.7 16 46 10 P118N0270 h
2.75 0/-0.014 2.75 16 46 10 P118N0275 h
2.80 0/-0.014 2.8 16 46 10 P118N0280 h
2.90 0/-0.014 2.9 16 46 10 P118N0290 h
3.00 0/-0.014 3 16 46 10 P118N0300 h
3.10 0/-0.018 3.1 18 49 10 P118N0310 h
3.20 0/-0.018 3.2 18 49 10 P118N0320 h
3.25 0/-0.018 3.25 18 49 10 P118N0325 h
3.30 0/-0.018 3.3 18 49 10 P118N0330 h
3.40 0/-0.018 3.4 20 52 10 P118N0340 h
3.50 0/-0.018 3.5 20 52 10 P118N0350 h
3.60 0/-0.018 3.6 20 52 10 P118N0360 h
3.70 0/-0.018 3.7 20 52 10 P118N0370 h
3.75 0/-0.018 3.75 20 52 10 P118N0375 h
3.80 0/-0.018 3.8 22 55 10 P118N0380 h
3.90 0/-0.018 3.9 22 55 10 P118N0390 h
4.00 0/-0.018 4 22 55 10 P118N0400 h
4.10 0/-0.018 4.1 22 55 10 P118N0410 h
4.20 0/-0.018 4.2 22 55 10 P118N0420 h
118N
N type for general purpose, extra-short
DIN
1897
* < Ø2 mm = BR
PMKNSH
+,,
+ 1st choice , suitable
HSS and HSS/Co drills
235
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
h stock standard f non-standard stock m stock exhaustion
D(h8) D Tol. d l L PACKAGING EDP No. Stock
4.25 0/-0.018 4.25 22 55 10 P118N0425 h
4.30 0/-0.018 4.3 24 58 10 P118N0430 h
4.40 0/-0.018 4.4 24 58 10 P118N0440 f
4.50 0/-0.018 4.5 24 58 10 P118N0450 h
4.60 0/-0.018 4.6 24 58 10 P118N0460 h
4.70 0/-0.018 4.7 24 58 10 P118N0470 h
4.75 0/-0.018 4.75 24 58 10 P118N0475 h
4.80 0/-0.018 4.8 26 62 10 P118N0480 h
4.90 0/-0.018 4.9 26 62 10 P118N0490 h
5.00 0/-0.018 5 26 62 10 P118N0500 h
5.10 0/-0.018 5.1 26 62 10 P118N0510 h
5.20 0/-0.018 5.2 26 62 10 P118N0520 h
5.25 0/-0.018 5.25 26 62 10 P118N0525 h
5.30 0/-0.018 5.3 26 62 10 P118N0530 h
5.40 0/-0.018 5.4 28 66 10 P118N0540 h
5.50 0/-0.018 5.5 28 66 10 P118N0550 h
5.60 0/-0.018 5.6 28 66 10 P118N0560 h
5.70 0/-0.018 5.7 28 66 10 P118N0570 h
5.75 0/-0.018 5.75 28 66 10 P118N0575 h
5.80 0/-0.018 5.8 28 66 10 P118N0580 h
5.90 0/-0.018 5.9 28 66 10 P118N0590 f
6.00 0/-0.018 6 28 66 10 P118N0600 h
6.10 0/-0.022 6.1 31 70 10 P118N0610 h
6.20 0/-0.022 6.2 31 70 10 P118N0620 h
6.25 0/-0.022 6.25 31 70 10 P118N0625 h
6.30 0/-0.022 6.3 31 70 10 P118N0630 h
6.40 0/-0.022 6.4 31 70 10 P118N0640 h
6.50 0/-0.022 6.5 31 70 10 P118N0650 h
6.60 0/-0.022 6.6 31 70 5 P118N0660 f
6.70 0/-0.022 6.7 31 70 5 P118N0670 h
6.75 0/-0.022 6.75 34 74 5 P118N0675 h
6.80 0/-0.022 6.8 34 74 5 P118N0680 h
6.90 0/-0.022 6.9 34 74 5 P118N0690 h
7.00 0/-0.022 7 34 74 5 P118N0700 h
7.10 0/-0.022 7.1 34 74 5 P118N0710 h
7.20 0/-0.022 7.2 34 74 5 P118N0720 h
7.25 0/-0.022 7.25 34 74 5 P118N0725 h
7.30 0/-0.022 7.3 34 74 5 P118N0730 h
7.40 0/-0.022 7.4 34 74 5 P118N0740 f
118N
N type for general purpose, extra-short
DIN
1897
PMKNSH
+,,
+ 1st choice , suitable
HSS and HSS/Co drills
236
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
h stock standard f non-standard stock m stock exhaustion
D(h8) D Tol. d l L PACKAGING EDP No. Stock
7.50 0/-0.022 7.5 34 74 5 P118N0750 h
7.60 0/-0.022 7.6 37 79 5 P118N0760 h
7.70 0/-0.022 7.7 37 79 5 P118N0770 f
7.75 0/-0.022 7.75 37 79 5 P118N0775 h
7.80 0/-0.022 7.8 37 79 5 P118N0780 h
7.90 0/-0.022 7.9 37 79 5 P118N0790 f
8.00 0/-0.022 8 37 79 5 P118N0800 h
8.10 0/-0.022 8.1 37 79 5 P118N0810 h
8.20 0/-0.022 8.2 37 79 5 P118N0820 h
8.25 0/-0.022 8.25 37 79 5 P118N0825 h
8.30 0/-0.022 8.3 37 79 5 P118N0830 f
8.40 0/-0.022 8.4 37 79 5 P118N0840 f
8.50 0/-0.022 8.5 37 79 5 P118N0850 h
8.60 0/-0.022 8.6 40 84 5 P118N0860 h
8.70 0/-0.022 8.7 40 84 5 P118N0870 f
8.75 0/-0.022 8.75 40 84 5 P118N0875 h
8.80 0/-0.022 8.8 40 84 5 P118N0880 f
8.90 0/-0.022 8.9 40 84 5 P118N0890 h
9.00 0/-0.022 9 40 84 5 P118N0900 h
9.10 0/-0.022 9.1 40 84 5 P118N0910 h
9.20 0/-0.022 9.2 40 84 5 P118N0920 f
9.25 0/-0.022 9.25 40 84 5 P118N0925 f
9.30 0/-0.022 9.3 40 84 5 P118N0930 f
9.40 0/-0.022 9.4 40 84 5 P118N0940 f
9.50 0/-0.022 9.5 40 84 5 P118N0950 h
9.60 0/-0.022 9.6 43 89 5 P118N0960 f
9.70 0/-0.022 9.7 43 89 5 P118N0970 f
9.75 0/-0.022 9.75 43 89 5 P118N0975 f
9.80 0/-0.022 9.8 43 89 5 P118N0980 f
9.90 0/-0.022 9.9 43 89 5 P118N0990 f
10.00 0/-0.022 10 43 89 5 P118N1000 h
10.25 0/-0.027 10.25 43 89 5 P118N1025 h
10.50 0/-0.027 10.5 43 89 5 P118N1050 h
10.75 0/-0.027 10.75 47 95 5 P118N1075 h
11.00 0/-0.027 11 47 95 5 P118N1100 h
11.25 0/-0.027 11.25 47 95 5 P118N1125 h
11.50 0/-0.027 11.5 47 95 5 P118N1150 h
11.75 0/-0.027 11.75 47 95 5 P118N1175 h
12.00 0/-0.027 12 51 102 5 P118N1200 h
118N
N type for general purpose, extra-short
DIN
1897
PMKNSH
+,,
+ 1st choice , suitable
HSS and HSS/Co drills
237
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
h stock standard f non-standard stock m stock exhaustion
D(h8) D Tol. d l L PACKAGING EDP No. Stock
12.25 0/-0.027 12.25 51 102 5 P118N1225 h
12.50 0/-0.027 12.5 51 102 5 P118N1250 h
12.75 0/-0.027 12.75 51 102 5 P118N1275 h
13.00 0/-0.027 13 51 102 5 P118N1300 h
13.25 0/-0.027 13.25 54 107 1 P118N1325 h
13.50 0/-0.027 13.5 54 107 1 P118N1350 h
13.75 0/-0.027 13.75 54 107 1 P118N1375 h
14.00 0/-0.027 14 54 107 1 P118N1400 h
14.25 0/-0.027 14.25 56 111 1 P118N1425 h
14.50 0/-0.027 14.5 56 111 1 P118N1450 h
14.75 0/-0.027 14.75 56 111 1 P118N1475 h
15.00 0/-0.027 15 56 111 1 P118N1500 h
15.25 0/-0.027 15.25 58 115 1 P118N1525 h
15.50 0/-0.027 15.5 58 115 1 P118N1550 h
15.75 0/-0.027 15.75 58 115 1 P118N1575 f
16.00 0/-0.027 16 58 115 1 P118N1600 h
118N
N type for general purpose, extra-short
DIN
1897
PMKNSH
+,,
+ 1st choice , suitable
HSS and HSS/Co drills
238
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
CUTTING PARAMETERS
118N
Material Group
ISO 513 P1 P2 P3 P4 K1 K2 N1 N5 N2 N3 N4
Hardness/Rm 500-700 N/mm² 600-1000 N/mm² 150-350 HB
Vc (m/min) 25-35 20-30 25-35 50-70 40-60
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
19550 0.017 160 7960 0.014 120 9550 0.019 180 19110 0.024 450 15920 0.017 270
1.5 6370 0.035 220 5310 0.030 160 6370 0.039 250 12740 0.049 620 10620 0.035 370
24780 0.050 240 3980 0.043 170 4780 0.055 260 9550 0.070 670 7960 0.050 400
2.5 3820 0.070 270 3180 0.060 190 3820 0.077 290 7640 0.098 750 6370 0.070 450
33180 0.080 250 2650 0.068 180 3180 0.088 280 6370 0.112 710 5310 0.080 420
3.5 2730 0.090 250 2270 0.077 170 2730 0.099 270 5460 0.126 690 4550 0.090 410
42390 0.100 240 1990 0.085 170 2390 0.110 260 4780 0.140 670 3980 0.100 400
51910 0.110 210 1590 0.094 150 1910 0.121 230 3820 0.154 590 3180 0.110 350
61590 0.120 190 1330 0.102 140 1590 0.132 210 3180 0.168 530 2650 0.120 320
71360 0.130 180 1140 0.111 130 1360 0.143 190 2730 0.182 500 2270 0.130 300
81190 0.140 170 1000 0.119 120 1190 0.154 180 2390 0.196 470 1990 0.140 280
91060 0.160 170 880 0.136 120 1060 0.176 190 2120 0.224 470 1770 0.160 280
10 960 0.170 160 800 0.145 120 960 0.187 180 1910 0.238 450 1590 0.170 270
11 870 0.180 160 720 0.153 110 870 0.198 170 1740 0.252 440 1450 0.180 260
12 800 0.190 150 660 0.162 110 800 0.209 170 1590 0.266 420 1330 0.190 250
13 730 0.200 150 610 0.170 100 730 0.220 160 1470 0.280 410 1220 0.200 240
14 680 0.210 140 570 0.179 100 680 0.231 160 1360 0.294 400 1140 0.210 240
15 640 0.220 140 530 0.187 100 640 0.242 150 1270 0.308 390 1060 0.220 230
16 600 0.240 140 500 0.204 100 600 0.264 160 1190 0.336 400 1000 0.240 240
HSS and HSS/Co drills
239
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
h stock standard f non-standard stock m stock exhaustion
218NVA
NVA type for tough materials, extra-short
DIN
1897
PMKNSH
++,,,
+ 1st choice , suitable
D(h8) D Tol. d l L PACKAGING EDP No. Stock
1.00 0/-0.014 1 6 26 10 P218NVA0100 h
1.10 0/-0.014 1.1 7 28 10 P218NVA0110 f
1.20 0/-0.014 1.2 8 30 10 P218NVA0120 h
1.30 0/-0.014 1.3 8 30 10 P218NVA0130 h
1.40 0/-0.014 1.4 9 32 10 P218NVA0140 f
1.50 0/-0.014 1.5 9 32 10 P218NVA0150 h
1.60 0/-0.014 1.6 10 34 10 P218NVA0160 h
1.70 0/-0.014 1.7 10 34 10 P218NVA0170 f
1.80 0/-0.014 1.8 11 36 10 P218NVA0180 f
1.90 0/-0.014 1.9 11 36 10 P218NVA0190 h
2.00 0/-0.014 2 12 38 10 P218NVA0200 h
2.10 0/-0.014 2.1 12 38 10 P218NVA0210 h
2.20 0/-0.014 2.2 13 40 10 P218NVA0220 f
2.30 0/-0.014 2.3 13 40 10 P218NVA0230 h
2.40 0/-0.014 2.4 14 43 10 P218NVA0240 h
2.50 0/-0.014 2.5 14 43 10 P218NVA0250 h
2.60 0/-0.014 2.6 14 43 10 P218NVA0260 h
2.70 0/-0.014 2.7 16 46 10 P218NVA0270 f
2.80 0/-0.014 2.8 16 46 10 P218NVA0280 h
2.90 0/-0.014 2.9 16 46 10 P218NVA0290 f
3.00 0/-0.014 3 16 46 10 P218NVA0300 h
3.10 0/-0.018 3.1 18 49 10 P218NVA0310 f
3.20 0/-0.018 3.2 18 49 10 P218NVA0320 h
3.30 0/-0.018 3.3 18 49 10 P218NVA0330 h
3.40 0/-0.018 3.4 20 52 10 P218NVA0340 h
3.50 0/-0.018 3.5 20 52 10 P218NVA0350 h
3.60 0/-0.018 3.6 20 52 10 P218NVA0360 f
3.70 0/-0.018 3.7 20 52 10 P218NVA0370 h
3.80 0/-0.018 3.8 22 55 10 P218NVA0380 h
3.90 0/-0.018 3.9 22 55 10 P218NVA0390 f
4.00 0/-0.018 4 22 55 10 P218NVA0400 h
4.10 0/-0.018 4.1 22 55 10 P218NVA0410 h
4.20 0/-0.018 4.2 22 55 10 P218NVA0420 h
4.30 0/-0.018 4.3 24 58 10 P218NVA0430 h
4.40 0/-0.018 4.4 24 58 10 P218NVA0440 f
4.50 0/-0.018 4.5 24 58 10 P218NVA0450 h
4.60 0/-0.018 4.6 24 58 10 P218NVA0460 h
4.70 0/-0.018 4.7 24 58 10 P218NVA0470 f
4.80 0/-0.018 4.8 26 62 10 P218NVA0480 h
HSS and HSS/Co drills
240
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
h stock standard f non-standard stock m stock exhaustion
218NVA
NVA type for tough materials, extra-short
DIN
1897
PMKNSH
++,,,
+ 1st choice , suitable
D(h8) D Tol. d l L PACKAGING EDP No. Stock
4.90 0/-0.018 4.9 26 62 10 P218NVA0490 f
5.00 0/-0.018 5 26 62 10 P218NVA0500 h
5.10 0/-0.018 5.1 26 62 10 P218NVA0510 h
5.20 0/-0.018 5.2 26 62 10 P218NVA0520 h
5.30 0/-0.018 5.3 26 62 10 P218NVA0530 f
5.40 0/-0.018 5.4 28 66 10 P218NVA0540 f
5.50 0/-0.018 5.5 28 66 10 P218NVA0550 h
5.60 0/-0.018 5.6 28 66 10 P218NVA0560 h
5.70 0/-0.018 5.7 28 66 10 P218NVA0570 f
5.80 0/-0.018 5.8 28 66 10 P218NVA0580 f
5.90 0/-0.018 5.9 28 66 10 P218NVA0590 f
6.00 0/-0.018 6 28 66 10 P218NVA0600 h
6.10 0/-0.022 6.1 31 70 10 P218NVA0610 f
6.20 0/-0.022 6.2 31 70 10 P218NVA0620 f
6.30 0/-0.022 6.3 31 70 10 P218NVA0630 f
6.40 0/-0.022 6.4 31 70 10 P218NVA0640 f
6.50 0/-0.022 6.5 31 70 10 P218NVA0650 h
6.60 0/-0.022 6.6 31 70 5 P218NVA0660 f
6.70 0/-0.022 6.7 31 70 5 P218NVA0670 h
6.80 0/-0.022 6.8 34 74 5 P218NVA0680 h
6.90 0/-0.022 6.9 34 74 5 P218NVA0690 h
7.00 0/-0.022 7 34 74 5 P218NVA0700 h
7.10 0/-0.022 7.1 34 74 5 P218NVA0710 f
7.20 0/-0.022 7.2 34 74 5 P218NVA0720 f
7.30 0/-0.022 7.3 34 74 5 P218NVA0730 f
7.40 0/-0.022 7.4 34 74 5 P218NVA0740 f
7.50 0/-0.022 7.5 34 74 5 P218NVA0750 h
7.60 0/-0.022 7.6 37 79 5 P218NVA0760 f
7.70 0/-0.022 7.7 37 79 5 P218NVA0770 f
7.80 0/-0.022 7.8 37 79 5 P218NVA0780 h
7.90 0/-0.022 7.9 37 79 5 P218NVA0790 f
8.00 0/-0.022 8 37 79 5 P218NVA0800 h
8.10 0/-0.022 8.1 37 79 5 P218NVA0810 f
8.20 0/-0.022 8.2 37 79 5 P218NVA0820 h
8.30 0/-0.022 8.3 37 79 5 P218NVA0830 h
8.40 0/-0.022 8.4 37 79 5 P218NVA0840 f
8.50 0/-0.022 8.5 37 79 5 P218NVA0850 h
8.60 0/-0.022 8.6 40 84 5 P218NVA0860 h
8.70 0/-0.022 8.7 40 84 5 P218NVA0870 h
HSS and HSS/Co drills
241
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
h stock standard f non-standard stock m stock exhaustion
218NVA
NVA type for tough materials, extra-short
DIN
1897
PMKNSH
++,,,
+ 1st choice , suitable
D(h8) D Tol. d l L PACKAGING EDP No. Stock
8.80 0/-0.022 8.8 40 84 5 P218NVA0880 f
8.90 0/-0.022 8.9 40 84 5 P218NVA0890 f
9.00 0/-0.022 9 40 84 5 P218NVA0900 h
9.10 0/-0.022 9.1 40 84 5 P218NVA0910 f
9.20 0/-0.022 9.2 40 84 5 P218NVA0920 h
9.30 0/-0.022 9.3 40 84 5 P218NVA0930 f
9.40 0/-0.022 9.4 40 84 5 P218NVA0940 h
9.50 0/-0.022 9.5 40 84 5 P218NVA0950 h
9.60 0/-0.022 9.6 43 89 5 P218NVA0960 f
9.70 0/-0.022 9.7 43 89 5 P218NVA0970 f
9.80 0/-0.022 9.8 43 89 5 P218NVA0980 h
9.90 0/-0.022 9.9 43 89 5 P218NVA0990 f
10.00 0/-0.022 10 43 89 5 P218NVA1000 h
10.20 0/-0.027 10.2 43 89 5 P218NVA1020 h
10.25 0/-0.027 10.25 43 89 5 P218NVA1025 h
10.50 0/-0.027 10.5 43 89 5 P218NVA1050 h
11.00 0/-0.027 11 47 95 5 P218NVA1100 h
11.50 0/-0.027 11.5 47 95 5 P218NVA1150 h
12.00 0/-0.027 12 51 102 5 P218NVA1200 h
12.50 0/-0.027 12.5 51 102 5 P218NVA1250 h
13.00 0/-0.027 13 51 102 5 P218NVA1300 h
13.50 0/-0.027 13.5 54 107 1 P218NVA1350 h
14.00 0/-0.027 14 54 107 1 P218NVA1400 h
14.50 0/-0.027 14.5 56 111 1 P218NVA1450 h
15.00 0/-0.027 15 56 111 1 P218NVA1500 h
15.50 0/-0.027 15.5 58 115 1 P218NVA1550 h
16.00 0/-0.027 16 58 115 1 P218NVA1600 h
16.50 0/-0.027 16.5 60 119 1 P218NVA1650 h
17.00 0/-0.027 17 60 119 1 P218NVA1700 h
17.50 0/-0.027 17.5 62 123 1 P218NVA1750 h
18.00 0/-0.027 18 62 123 1 P218NVA1800 h
18.50 0/-0.033 18.5 64 127 1 P218NVA1850 h
19.00 0/-0.033 19 64 127 1 P218NVA1900 h
19.50 0/-0.033 19.5 66 131 1 P218NVA1950 h
20.00 0/-0.033 20 66 131 1 P218NVA2000 h
HSS and HSS/Co drills
242
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
CUTTING PARAMETERS
218NVA
Material Group
ISO 513 P1 P2 P3 P4 M1 M2 M3 M4 K1 K2
Hardness/Rm 500-700 N/mm² 600-1000 N/mm² < 750 N/mm² 550-850 N/mm² 150-350 HB
Vc (m/min) 25-35 20-30 12-18 8-12 25-35
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
19550 0.017 160 7960 0.014 120 4780 0.012 57 3180 0.009 27 9550 0.019 180
1.5 6370 0.035 220 5310 0.030 160 3180 0.025 80 2120 0.018 37 6370 0.039 250
24780 0.050 240 3980 0.043 170 2390 0.035 80 1590 0.025 40 4780 0.055 260
2.5 3820 0.070 270 3180 0.060 190 1910 0.049 90 1270 0.035 44 3820 0.077 290
33180 0.080 250 2650 0.068 180 1590 0.056 90 1060 0.040 42 3180 0.088 280
3.5 2730 0.090 250 2270 0.077 170 1360 0.063 90 910 0.045 41 2730 0.099 270
42390 0.100 240 1990 0.085 170 1190 0.070 80 800 0.050 40 2390 0.110 260
51910 0.110 210 1590 0.094 150 960 0.077 70 640 0.055 35 1910 0.121 230
61590 0.120 190 1330 0.102 140 800 0.084 70 530 0.060 32 1590 0.132 210
71360 0.130 180 1140 0.111 130 680 0.091 60 450 0.065 29 1360 0.143 190
81190 0.140 170 1000 0.119 120 600 0.098 60 400 0.070 28 1190 0.154 180
91060 0.160 170 880 0.136 120 530 0.112 60 350 0.080 28 1060 0.176 190
10 960 0.170 160 800 0.145 120 480 0.119 60 320 0.085 27 960 0.187 180
11 870 0.180 160 720 0.153 110 430 0.126 54 290 0.090 26 870 0.198 170
12 800 0.190 150 660 0.162 110 400 0.133 53 270 0.095 26 800 0.209 170
13 730 0.200 150 610 0.170 100 370 0.140 52 240 0.100 24 730 0.220 160
14 680 0.210 140 570 0.179 100 340 0.147 50 230 0.105 24 680 0.231 160
15 640 0.220 140 530 0.187 100 320 0.154 49 210 0.110 23 640 0.242 150
16 600 0.240 140 500 0.204 100 300 0.168 50 200 0.120 24 600 0.264 160
17 560 0.260 150 470 0.221 100 280 0.182 51 190 0.130 25 560 0.286 160
18 530 0.280 150 440 0.238 100 270 0.196 53 180 0.140 25 530 0.308 160
19 500 0.300 150 420 0.255 110 250 0.210 53 170 0.150 26 500 0.330 170
20 480 0.320 150 400 0.272 110 240 0.224 54 160 0.160 26 480 0.352 170
Material Group
ISO 513 K3 K4 N1 N5 N2 N3 N4 S1 S2 S4
Hardness/Rm < 350 HB < 35 HRC
Vc (m/min) 20-30 50-70 40-60 8-12
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
17960 0.013 100 19110 0.024 450 15920 0.017 270 3180 0.007 22
1.5 5310 0.026 140 12740 0.049 620 10620 0.035 370 2120 0.014 30
23980 0.038 150 9550 0.070 670 7960 0.050 400 1590 0.020 32
2.5 3180 0.053 170 7640 0.098 750 6370 0.070 450 1270 0.028 36
32650 0.060 160 6370 0.112 710 5310 0.080 420 1060 0.032 34
3.5 2270 0.068 150 5460 0.126 690 4550 0.090 410 910 0.036 33
41990 0.075 150 4780 0.140 670 3980 0.100 400 800 0.040 32
51590 0.083 130 3820 0.154 590 3180 0.110 350 640 0.044 28
61330 0.090 120 3180 0.168 530 2650 0.120 320 530 0.048 25
71140 0.098 110 2730 0.182 500 2270 0.130 300 450 0.052 23
81000 0.105 110 2390 0.196 470 1990 0.140 280 400 0.056 22
9880 0.120 110 2120 0.224 470 1770 0.160 280 350 0.064 22
10 800 0.128 100 1910 0.238 450 1590 0.170 270 320 0.068 22
11 720 0.135 100 1740 0.252 440 1450 0.180 260 290 0.072 21
12 660 0.143 90 1590 0.266 420 1330 0.190 250 270 0.076 21
13 610 0.150 90 1470 0.280 410 1220 0.200 240 240 0.080 19
14 570 0.158 90 1360 0.294 400 1140 0.210 240 230 0.084 19
15 530 0.165 90 1270 0.308 390 1060 0.220 230 210 0.088 18
16 500 0.180 90 1190 0.336 400 1000 0.240 240 200 0.096 19
17 470 0.195 90 1120 0.364 410 940 0.260 240 190 0.104 20
18 440 0.210 90 1060 0.392 420 880 0.280 250 180 0.112 20
19 420 0.225 90 1010 0.420 420 840 0.300 250 170 0.120 20
20 400 0.240 100 960 0.448 430 800 0.320 260 160 0.128 20
HSS and HSS/Co drills
243
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
h stock standard f non-standard stock m stock exhaustion
D(h8) D Tol. d l L PACKAGING EDP No. Stock
1.00 0/-0.014 1 12 34 10 P1385NTI0100 h
1.10 0/-0.014 1.1 14 36 10 P1385NTI0110 h
1.20 0/-0.014 1.2 16 38 10 P1385NTI0120 h
1.30 0/-0.014 1.3 16 38 10 P1385NTI0130 h
1.40 0/-0.014 1.4 18 40 10 P1385NTI0140 h
1.50 0/-0.014 1.5 18 40 10 P1385NTI0150 h
1.60 0/-0.014 1.6 20 43 10 P1386STI0160 h
1.70 0/-0.014 1.7 20 43 10 P1386STI0170 h
1.80 0/-0.014 1.8 22 46 10 P1386STI0180 h
1.90 0/-0.014 1.9 22 46 10 P1386STI0190 h
2.00 0/-0.014 2 24 49 10 P1386STI0200 h
2.10 0/-0.014 2.1 24 49 10 P1386STI0210 h
2.20 0/-0.014 2.2 27 53 10 P1386STI0220 h
2.30 0/-0.014 2.3 27 53 10 P1386STI0230 h
2.40 0/-0.014 2.4 30 57 10 P1386STI0240 h
2.50 0/-0.014 2.5 30 57 10 P1386STI0250 h
2.60 0/-0.014 2.6 30 57 10 P1386STI0260 h
2.70 0/-0.014 2.7 33 61 10 P1386STI0270 h
2.80 0/-0.014 2.8 33 61 10 P1386STI0280 h
2.90 0/-0.014 2.9 33 61 10 P1386STI0290 h
3.00 0/-0.014 3 33 61 10 P1386STI0300 h
3.10 0/-0.018 3.1 36 65 10 P1386STI0310 h
3.20 0/-0.018 3.2 36 65 10 P1386STI0320 h
3.30 0/-0.018 3.3 36 65 10 P1386STI0330 h
3.40 0/-0.018 3.4 39 70 10 P1386STI0340 h
3.50 0/-0.018 3.5 39 70 10 P1386STI0350 h
3.60 0/-0.018 3.6 39 70 10 P1386STI0360 h
3.70 0/-0.018 3.7 39 70 10 P1386STI0370 h
3.80 0/-0.018 3.8 43 75 10 P1386STI0380 h
3.90 0/-0.018 3.9 43 75 10 P1386STI0390 h
4.00 0/-0.018 4 43 75 10 P1386STI0400 h
4.10 0/-0.018 4.1 43 75 10 P1386STI0410 h
4.20 0/-0.018 4.2 43 75 10 P1386STI0420 h
4.30 0/-0.018 4.3 47 80 10 P1386STI0430 h
4.40 0/-0.018 4.4 47 80 10 P1386STI0440 h
4.50 0/-0.018 4.5 47 80 10 P1386STI0450 h
4.60 0/-0.018 4.6 47 80 10 P1386STI0460 h
4.70 0/-0.018 4.7 47 80 10 P1386STI0470 h
4.80 0/-0.018 4.8 52 86 10 P1386STI0480 h
1386STI
STI type for general purpose, split point,
TiN pointed, short
DIN
338
PMKNSH
+,+,,
+ 1st choice , suitable
HSS and HSS/Co drills
244
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
h stock standard f non-standard stock m stock exhaustion
D(h8) D Tol. d l L PACKAGING EDP No. Stock
4.90 0/-0.018 4.9 52 86 10 P1386STI0490 h
5.00 0/-0.018 5 52 86 10 P1386STI0500 h
5.10 0/-0.018 5.1 52 86 10 P1386STI0510 h
5.20 0/-0.018 5.2 52 86 10 P1386STI0520 h
5.30 0/-0.018 5.3 52 86 10 P1386STI0530 h
5.40 0/-0.018 5.4 57 93 10 P1386STI0540 h
5.50 0/-0.018 5.5 57 93 10 P1386STI0550 h
5.60 0/-0.018 5.6 57 93 10 P1386STI0560 h
5.70 0/-0.018 5.7 57 93 10 P1386STI0570 h
5.80 0/-0.018 5.8 57 93 10 P1386STI0580 h
5.90 0/-0.018 5.9 57 93 10 P1386STI0590 h
6.00 0/-0.018 6 57 93 10 P1386STI0600 h
6.10 0/-0.022 6.1 63 101 10 P1386STI0610 h
6.20 0/-0.022 6.2 63 101 10 P1386STI0620 h
6.30 0/-0.022 6.3 63 101 10 P1386STI0630 h
6.40 0/-0.022 6.4 63 101 10 P1386STI0640 h
6.50 0/-0.022 6.5 63 101 10 P1386STI0650 h
6.60 0/-0.022 6.6 63 101 5 P1386STI0660 h
6.70 0/-0.022 6.7 63 101 5 P1386STI0670 h
6.80 0/-0.022 6.8 69 109 5 P1386STI0680 h
6.90 0/-0.022 6.9 69 109 5 P1386STI0690 h
7.00 0/-0.022 7 69 109 5 P1386STI0700 h
7.10 0/-0.022 7.1 69 109 5 P1386STI0710 h
7.20 0/-0.022 7.2 69 109 5 P1386STI0720 h
7.30 0/-0.022 7.3 69 109 5 P1386STI0730 h
7.40 0/-0.022 7.4 69 109 5 P1386STI0740 h
7.50 0/-0.022 7.5 69 109 5 P1386STI0750 h
7.60 0/-0.022 7.6 75 117 5 P1386STI0760 h
7.70 0/-0.022 7.7 75 117 5 P1386STI0770 h
7.80 0/-0.022 7.8 75 117 5 P1386STI0780 h
7.90 0/-0.022 7.9 75 117 5 P1386STI0790 h
8.00 0/-0.022 8 75 117 5 P1386STI0800 h
8.10 0/-0.022 8.1 75 117 5 P1386STI0810 h
8.20 0/-0.022 8.2 75 117 5 P1386STI0820 h
8.30 0/-0.022 8.3 75 117 5 P1386STI0830 h
8.40 0/-0.022 8.4 75 117 5 P1386STI0840 h
8.50 0/-0.022 8.5 75 117 5 P1386STI0850 h
8.60 0/-0.022 8.6 81 125 5 P1386STI0860 h
8.70 0/-0.022 8.7 81 125 5 P1386STI0870 h
1386STI
STI type for general purpose, split point,
TiN pointed, short
DIN
338
PMKNSH
+,+,,
+ 1st choice , suitable
HSS and HSS/Co drills
245
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
h stock standard f non-standard stock m stock exhaustion
D(h8) D Tol. d l L PACKAGING EDP No. Stock
8.80 0/-0.022 8.8 81 125 5 P1386STI0880 h
8.90 0/-0.022 8.9 81 125 5 P1386STI0890 h
9.00 0/-0.022 9 81 125 5 P1386STI0900 h
9.10 0/-0.022 9.1 81 125 5 P1386STI0910 h
9.20 0/-0.022 9.2 81 125 5 P1386STI0920 h
9.30 0/-0.022 9.3 81 125 5 P1386STI0930 h
9.40 0/-0.022 9.4 81 125 5 P1386STI0940 h
9.50 0/-0.022 9.5 81 125 5 P1386STI0950 h
9.60 0/-0.022 9.6 87 133 5 P1386STI0960 h
9.70 0/-0.022 9.7 87 133 5 P1386STI0970 h
9.80 0/-0.022 9.8 87 133 5 P1386STI0980 h
9.90 0/-0.022 9.9 87 133 5 P1386STI0990 h
10.00 0/-0.022 10 87 133 5 P1386STI1000 h
10.10 0/-0.027 10.1 87 133 5 P1386STI1010 h
10.20 0/-0.027 10.2 87 133 5 P1386STI1020 h
10.30 0/-0.027 10.3 87 133 5 P1386STI1030 h
10.40 0/-0.027 10.4 87 133 5 P1386STI1040 h
10.50 0/-0.027 10.5 87 133 5 P1386STI1050 h
10.60 0/-0.027 10.6 87 133 5 P1386STI1060 h
10.70 0/-0.027 10.7 94 142 5 P1386STI1070 h
10.80 0/-0.027 10.8 94 142 5 P1386STI1080 h
10.90 0/-0.027 10.9 94 142 5 P1386STI1090 h
11.00 0/-0.027 11 94 142 5 P1386STI1100 h
11.10 0/-0.027 11.1 94 142 5 P1386STI1110 h
11.20 0/-0.027 11.2 94 142 5 P1386STI1120 h
11.30 0/-0.027 11.3 94 142 5 P1386STI1130 h
11.40 0/-0.027 11.4 94 142 5 P1386STI1140 h
11.50 0/-0.027 11.5 94 142 5 P1386STI1150 h
11.60 0/-0.027 11.6 94 142 5 P1386STI1160 h
11.70 0/-0.027 11.7 94 142 5 P1386STI1170 h
11.80 0/-0.027 11.8 94 142 5 P1386STI1180 h
11.90 0/-0.027 11.9 101 151 5 P1386STI1190 h
12.00 0/-0.027 12 101 151 5 P1386STI1200 h
12.10 0/-0.027 12.1 101 151 5 P1386STI1210 h
12.20 0/-0.027 12.2 101 151 5 P1386STI1220 h
12.30 0/-0.027 12.3 101 151 5 P1386STI1230 h
12.40 0/-0.027 12.4 101 151 5 P1386STI1240 h
12.50 0/-0.027 12.5 101 151 5 P1386STI1250 h
12.60 0/-0.027 12.6 101 151 5 P1386STI1260 h
1386STI
STI type for general purpose, split point,
TiN pointed, short
DIN
338
PMKNSH
+,+,,
+ 1st choice , suitable
HSS and HSS/Co drills
246
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
h stock standard f non-standard stock m stock exhaustion
D(h8) D Tol. d l L PACKAGING EDP No. Stock
12.70 0/-0.027 12.7 101 151 5 P1386STI1270 h
12.80 0/-0.027 12.8 101 151 5 P1386STI1280 h
12.90 0/-0.027 12.9 101 151 5 P1386STI1290 h
13.00 0/-0.027 13 101 151 5 P1386STI1300 h
1386STI
STI type for general purpose, split point,
TiN pointed, short
DIN
338
PMKNSH
+,+,,
+ 1st choice , suitable
1386STIA01A 1386STIA01B 1386STIA05C
Set 50 pcs.
1386STI DIN338 HSS TIN POINTED
Ø1 mm÷Ø5.9 mm x 0.1 mm
Set 41 pcs.
1386STI DIN338 HSS TIN POINTED
Ø6 mm÷Ø10 mm x 0.1 mm
Set 25 pcs.
1386STI DIN338 HSS TIN POINTED
Ø1 mm÷Ø13 mm x 0.5 mm
HSS and HSS/Co drills
247
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
CUTTING PARAMETERS
1386STI
Material Group
ISO 513 P1 P2 P3 P4 M1 M2 K1 K2
Hardness/Rm 500-700 N/mm² 600-1000 N/mm² < 750 N/mm² 150-350 HB
Vc (m/min) 30-40 25-35 15-25 30-40
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
111150 0.017 190 9550 0.014 140 6370 0.012 80 11150 0.019 210
1.5 7430 0.035 260 6370 0.030 190 4250 0.025 100 7430 0.039 290
25570 0.050 280 4780 0.043 200 3180 0.035 110 5570 0.055 310
2.5 4460 0.075 330 3820 0.064 240 2550 0.053 130 4460 0.083 370
33720 0.090 330 3180 0.077 240 2120 0.063 130 3720 0.099 370
3.5 3180 0.105 330 2730 0.089 240 1820 0.074 130 3180 0.116 370
42790 0.110 310 2390 0.094 220 1590 0.077 120 2790 0.121 340
52230 0.125 280 1910 0.106 200 1270 0.088 110 2230 0.138 310
61860 0.160 300 1590 0.136 220 1060 0.112 120 1860 0.176 330
71590 0.175 280 1360 0.149 200 910 0.123 110 1590 0.193 310
81390 0.200 280 1190 0.170 200 800 0.140 110 1390 0.220 310
91240 0.210 260 1060 0.179 190 710 0.147 100 1240 0.231 290
10 1110 0.220 240 960 0.187 180 640 0.154 100 1110 0.242 270
11 1010 0.235 240 870 0.200 170 580 0.165 100 1010 0.259 260
12 930 0.250 230 800 0.213 170 530 0.175 90 930 0.275 260
13 860 0.265 230 730 0.225 160 490 0.186 90 860 0.292 250
Material Group
ISO 513 N1 N5 N2 N3 N4 S1 S2 S4
Hardness/Rm < 35 HRC
Vc (m/min) 60-80 50-70 12-18
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
122290 0.024 530 19110 0.017 320 4780 0.007 35
1.5 14860 0.049 730 12740 0.035 450 3180 0.014 45
211150 0.070 780 9550 0.050 480 2390 0.020 50
2.5 8920 0.105 940 7640 0.075 570 1910 0.030 55
37430 0.126 940 6370 0.090 570 1590 0.036 55
3.5 6370 0.147 940 5460 0.105 570 1360 0.042 55
45570 0.154 860 4780 0.110 530 1190 0.044 50
54460 0.175 780 3820 0.125 480 960 0.050 50
63720 0.224 830 3180 0.160 510 800 0.064 50
73180 0.245 780 2730 0.175 480 680 0.070 50
82790 0.280 780 2390 0.200 480 600 0.080 50
92480 0.294 730 2120 0.210 450 530 0.084 45
10 2230 0.308 690 1910 0.220 420 480 0.088 40
11 2030 0.329 670 1740 0.235 410 430 0.094 40
12 1860 0.350 650 1590 0.250 400 400 0.100 40
13 1710 0.371 630 1470 0.265 390 370 0.106 40
HSS and HSS/Co drills
248
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
h stock standard f non-standard stock m stock exhaustion
138N-138NTI
N type for general purpose, short (138N),
N type for general purpose, TiN coated, short (138NTI)
DIN
338
138N 138NTI
138N
* < Ø2 mm = BR
138NTI
PMKNSH
+,,
+ 1st choice , suitable
D(h8) D Tol. d l L PACKAGING EDP No. Stock EDP No. Stock
0.20 0/-0.014 0.2 2.5 19 10 P138NB0020 h
0.30 0/-0.014 0.3 3 19 10 P138NB0030 h
0.40 0/-0.014 0.4 5 20 10 P138NB0040 h
0.50 0/-0.014 0.5 6 22 10 P138NB0050 h
0.60 0/-0.014 0.6 7 24 10 P138NB0060 h
0.70 0/-0.014 0.7 9 28 10 P138NB0070 h
0.80 0/-0.014 0.8 10 30 10 P138NB0080 h
0.90 0/-0.014 0.9 11 32 10 P138NB0090 h
1.00 0/-0.014 1 12 34 10 P138NB0100 hP138NTI0100 h
1.10 0/-0.014 1.1 14 36 10 P138NB0110 hP138NTI0110 h
1.20 0/-0.014 1.2 16 38 10 P138NB0120 hP138NTI0120 h
1.25 0/-0.014 1.25 16 38 10 P138NB0125 h
1.30 0/-0.014 1.3 16 38 10 P138NB0130 hP138NTI0130 h
1.40 0/-0.014 1.4 18 40 10 P138NB0140 hP138NTI0140 h
1.50 0/-0.014 1.5 18 40 10 P138NB0150 hP138NTI0150 h
1.60 0/-0.014 1.6 20 43 10 P138NB0160 hP138NTI0160 h
1.70 0/-0.014 1.7 20 43 10 P138NB0170 hP138NTI0170 h
1.75 0/-0.014 1.75 22 46 10 P138NB0175 h
1.80 0/-0.014 1.8 22 46 10 P138NB0180 hP138NTI0180 h
1.90 0/-0.014 1.9 22 46 10 P138NB0190 hP138NTI0190 h
2.00 0/-0.014 2 24 49 10 P138N0200 hP138NTI0200 h
2.10 0/-0.014 2.1 24 49 10 P138N0210 hP138NTI0210 h
2.20 0/-0.014 2.2 27 53 10 P138N0220 hP138NTI0220 h
2.25 0/-0.014 2.25 27 53 10 P138N0225 h
2.30 0/-0.014 2.3 27 53 10 P138N0230 hP138NTI0230 h
2.40 0/-0.014 2.4 30 57 10 P138N0240 hP138NTI0240 h
2.50 0/-0.014 2.5 30 57 10 P138N0250 hP138NTI0250 h
2.60 0/-0.014 2.6 30 57 10 P138N0260 hP138NTI0260 h
2.70 0/-0.014 2.7 33 61 10 P138N0270 hP138NTI0270 h
2.75 0/-0.014 2.75 33 61 10 P138N0275 h
2.80 0/-0.014 2.8 33 61 10 P138N0280 hP138NTI0280 h
2.90 0/-0.014 2.9 33 61 10 P138N0290 hP138NTI0290 h
3.00 0/-0.014 3 33 61 10 P138N0300 hP138NTI0300 h
3.10 0/-0.018 3.1 36 65 10 P138N0310 hP138NTI0310 h
3.20 0/-0.018 3.2 36 65 10 P138N0320 hP138NTI0320 h
3.25 0/-0.018 3.25 36 65 10 P138N0325 h
3.30 0/-0.018 3.3 36 65 10 P138N0330 hP138NTI0330 h
3.40 0/-0.018 3.4 39 70 10 P138N0340 hP138NTI0340 h
3.50 0/-0.018 3.5 39 70 10 P138N0350 hP138NTI0350 h
138N 138NTI
HSS and HSS/Co drills
249
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
h stock standard f non-standard stock m stock exhaustion
138N-138NTI
N type for general purpose, short (138N),
N type for general purpose, TiN coated, short (138NTI)
DIN
338
138N 138NTI
138N
138NTI
PMKNSH
+,,
+ 1st choice , suitable
D(h8) D Tol. d l L PACKAGING EDP No. Stock EDP No. Stock
3.60 0/-0.018 3.6 39 70 10 P138N0360 hP138NTI0360 h
3.70 0/-0.018 3.7 39 70 10 P138N0370 hP138NTI0370 h
3.75 0/-0.018 3.75 39 70 10 P138N0375 h
3.80 0/-0.018 3.8 43 75 10 P138N0380 hP138NTI0380 h
3.90 0/-0.018 3.9 43 75 10 P138N0390 hP138NTI0390 h
4.00 0/-0.018 4 43 75 10 P138N0400 hP138NTI0400 h
4.10 0/-0.018 4.1 43 75 10 P138N0410 hP138NTI0410 h
4.20 0/-0.018 4.2 43 75 10 P138N0420 hP138NTI0420 h
4.25 0/-0.018 4.25 43 75 10 P138N0425 h
4.30 0/-0.018 4.3 47 80 10 P138N0430 hP138NTI0430 h
4.40 0/-0.018 4.4 47 80 10 P138N0440 hP138NTI0440 h
4.50 0/-0.018 4.5 47 80 10 P138N0450 hP138NTI0450 h
4.60 0/-0.018 4.6 47 80 10 P138N0460 hP138NTI0460 h
4.70 0/-0.018 4.7 47 80 10 P138N0470 hP138NTI0470 h
4.75 0/-0.018 4.75 47 80 10 P138N0475 h
4.80 0/-0.018 4.8 52 86 10 P138N0480 hP138NTI0480 h
4.90 0/-0.018 4.9 52 86 10 P138N0490 hP138NTI0490 h
5.00 0/-0.018 5 52 86 10 P138N0500 hP138NTI0500 h
5.10 0/-0.018 5.1 52 86 10 P138N0510 hP138NTI0510 h
5.20 0/-0.018 5.2 52 86 10 P138N0520 hP138NTI0520 h
5.25 0/-0.018 5.25 52 86 10 P138N0525 h
5.30 0/-0.018 5.3 52 86 10 P138N0530 hP138NTI0530 h
5.40 0/-0.018 5.4 57 93 10 P138N0540 hP138NTI0540 h
5.50 0/-0.018 5.5 57 93 10 P138N0550 hP138NTI0550 h
5.60 0/-0.018 5.6 57 93 10 P138N0560 hP138NTI0560 h
5.70 0/-0.018 5.7 57 93 10 P138N0570 hP138NTI0570 h
5.75 0/-0.018 5.75 57 93 10 P138N0575 h
5.80 0/-0.018 5.8 57 93 10 P138N0580 hP138NTI0580 h
5.90 0/-0.018 5.9 57 93 10 P138N0590 hP138NTI0590 h
6.00 0/-0.018 6 57 93 10 P138N0600 hP138NTI0600 h
6.10 0/-0.022 6.1 63 101 10 P138N0610 hP138NTI0610 h
6.20 0/-0.022 6.2 63 101 10 P138N0620 hP138NTI0620 h
6.25 0/-0.022 6.25 63 101 10 P138N0625 h
6.30 0/-0.022 6.3 63 101 10 P138N0630 hP138NTI0630 h
6.40 0/-0.022 6.4 63 101 10 P138N0640 hP138NTI0640 h
6.50 0/-0.022 6.5 63 101 10 P138N0650 hP138NTI0650 h
6.60 0/-0.022 6.6 63 101 5 P138N0660 hP138NTI0660 h
6.70 0/-0.022 6.7 63 101 5 P138N0670 hP138NTI0670 h
6.75 0/-0.022 6.75 69 109 5 P138N0675 h
138N 138NTI
HSS and HSS/Co drills
250
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
h stock standard f non-standard stock m stock exhaustion
138N-138NTI
N type for general purpose, short (138N),
N type for general purpose, TiN coated, short (138NTI)
DIN
338
138N 138NTI
138N
138NTI
PMKNSH
+,,
+ 1st choice , suitable
D(h8) D Tol. d l L PACKAGING EDP No. Stock EDP No. Stock
6.80 0/-0.022 6.8 69 109 5 P138N0680 hP138NTI0680 h
6.90 0/-0.022 6.9 69 109 5 P138N0690 hP138NTI0690 h
7.00 0/-0.022 7 69 109 5 P138N0700 hP138NTI0700 h
7.10 0/-0.022 7.1 69 109 5 P138N0710 hP138NTI0710 h
7.20 0/-0.022 7.2 69 109 5 P138N0720 hP138NTI0720 h
7.25 0/-0.022 7.25 69 109 5 P138N0725 h
7.30 0/-0.022 7.3 69 109 5 P138N0730 hP138NTI0730 h
7.40 0/-0.022 7.4 69 109 5 P138N0740 hP138NTI0740 h
7.50 0/-0.022 7.5 69 109 5 P138N0750 hP138NTI0750 h
7.60 0/-0.022 7.6 75 117 5 P138N0760 hP138NTI0760 h
7.70 0/-0.022 7.7 75 117 5 P138N0770 hP138NTI0770 h
7.75 0/-0.022 7.75 75 117 5 P138N0775 h
7.80 0/-0.022 7.8 75 117 5 P138N0780 hP138NTI0780 h
7.90 0/-0.022 7.9 75 117 5 P138N0790 hP138NTI0790 h
8.00 0/-0.022 8 75 117 5 P138N0800 hP138NTI0800 h
8.10 0/-0.022 8.1 75 117 5 P138N0810 hP138NTI0810 h
8.20 0/-0.022 8.2 75 117 5 P138N0820 hP138NTI0820 h
8.25 0/-0.022 8.25 75 117 5 P138N0825 h
8.30 0/-0.022 8.3 75 117 5 P138N0830 hP138NTI0830 h
8.40 0/-0.022 8.4 75 117 5 P138N0840 hP138NTI0840 h
8.50 0/-0.022 8.5 75 117 5 P138N0850 hP138NTI0850 h
8.60 0/-0.022 8.6 81 125 5 P138N0860 hP138NTI0860 h
8.70 0/-0.022 8.7 81 125 5 P138N0870 hP138NTI0870 h
8.75 0/-0.022 8.75 81 125 5 P138N0875 h
8.80 0/-0.022 8.8 81 125 5 P138N0880 hP138NTI0880 h
8.90 0/-0.022 8.9 81 125 5 P138N0890 hP138NTI0890 h
9.00 0/-0.022 9 81 125 5 P138N0900 hP138NTI0900 h
9.10 0/-0.022 9.1 81 125 5 P138N0910 hP138NTI0910 h
9.20 0/-0.022 9.2 81 125 5 P138N0920 hP138NTI0920 h
9.25 0/-0.022 9.25 81 125 5 P138N0925 h
9.30 0/-0.022 9.3 81 125 5 P138N0930 hP138NTI0930 h
9.40 0/-0.022 9.4 81 125 5 P138N0940 hP138NTI0940 h
9.50 0/-0.022 9.5 81 125 5 P138N0950 hP138NTI0950 h
9.60 0/-0.022 9.6 87 133 5 P138N0960 hP138NTI0960 h
9.70 0/-0.022 9.7 87 133 5 P138N0970 hP138NTI0970 h
9.75 0/-0.022 9.75 87 133 5 P138N0975 h
9.80 0/-0.022 9.8 87 133 5 P138N0980 hP138NTI0980 h
9.90 0/-0.022 9.9 87 133 5 P138N0990 hP138NTI0990 h
10.00 0/-0.022 10 87 133 5 P138N1000 hP138NTI1000 h
138N 138NTI
HSS and HSS/Co drills
251
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
h stock standard f non-standard stock m stock exhaustion
138N-138NTI
N type for general purpose, short (138N),
N type for general purpose, TiN coated, short (138NTI)
DIN
338
138N 138NTI
138N
138NTI
PMKNSH
+,,
+ 1st choice , suitable
D(h8) D Tol. d l L PACKAGING EDP No. Stock EDP No. Stock
10.10 0/-0.027 10.1 87 133 5 P138N1010 h
10.20 0/-0.027 10.2 87 133 5 P138N1020 hP138NTI1020 h
10.25 0/-0.027 10.25 87 133 5 P138N1025 h
10.30 0/-0.027 10.3 87 133 5 P138N1030 h
10.40 0/-0.027 10.4 87 133 5 P138N1040 h
10.50 0/-0.027 10.5 87 133 5 P138N1050 hP138NTI1050 h
10.60 0/-0.027 10.6 87 133 5 P138N1060 h
10.70 0/-0.027 10.7 94 142 5 P138N1070 h
10.75 0/-0.027 10.75 94 142 5 P138N1075 h
10.80 0/-0.027 10.8 94 142 5 P138N1080 h
10.90 0/-0.027 10.9 94 142 5 P138N1090 h
11.00 0/-0.027 11 94 142 5 P138N1100 hP138NTI1100 h
11.10 0/-0.027 11.1 94 142 5 P138N1110 h
11.20 0/-0.027 11.2 94 142 5 P138N1120 h
11.25 0/-0.027 11.25 94 142 5 P138N1125 h
11.30 0/-0.027 11.3 94 142 5 P138N1130 h
11.40 0/-0.027 11.4 94 142 5 P138N1140 h
11.50 0/-0.027 11.5 94 142 5 P138N1150 hP138NTI1150 h
11.60 0/-0.027 11.6 94 142 5 P138N1160 h
11.70 0/-0.027 11.7 94 142 5 P138N1170 h
11.75 0/-0.027 11.75 94 142 5 P138N1175 h
11.80 0/-0.027 11.8 94 142 5 P138N1180 h
11.90 0/-0.027 11.9 101 151 5 P138N1190 h
12.00 0/-0.027 12 101 151 5 P138N1200 hP138NTI1200 h
12.10 0/-0.027 12.1 101 151 5 P138N1210 h
12.20 0/-0.027 12.2 101 151 5 P138N1220 h
12.25 0/-0.027 12.25 101 151 5 P138N1225 h
12.30 0/-0.027 12.3 101 151 5 P138N1230 h
12.40 0/-0.027 12.4 101 151 5 P138N1240 h
12.50 0/-0.027 12.5 101 151 5 P138N1250 hP138NTI1250 h
12.60 0/-0.027 12.6 101 151 5 P138N1260 h
12.70 0/-0.027 12.7 101 151 5 P138N1270 h
12.75 0/-0.027 12.75 101 151 5 P138N1275 h
12.80 0/-0.027 12.8 101 151 5 P138N1280 h
12.90 0/-0.027 12.9 101 151 5 P138N1290 h
13.00 0/-0.027 13 101 151 5 P138N1300 hP138NTI1300 h
13.25 0/-0.027 13.25 108 160 1 P138N1325 h
13.50 0/-0.027 13.5 108 160 1 P138N1350 hP138NTI1350 h
13.75 0/-0.027 13.75 108 160 1 P138N1375 h
138N 138NTI
HSS and HSS/Co drills
252
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
h stock standard f non-standard stock m stock exhaustion
138N-138NTI
N type for general purpose, short (138N),
N type for general purpose, TiN coated, short (138NTI)
DIN
338
138N 138NTI
138N
138NTI
PMKNSH
+,,
+ 1st choice , suitable
D(h8) D Tol. d l L PACKAGING EDP No. Stock EDP No. Stock
14.00 0/-0.027 14 108 160 1 P138N1400 hP138NTI1400 h
14.25 0/-0.027 14.25 114 169 1 P138N1425 h
14.50 0/-0.027 14.5 114 169 1 P138N1450 hP138NTI1450 h
14.75 0/-0.027 14.75 114 169 1 P138N1475 h
15.00 0/-0.027 15 114 169 1 P138N1500 hP138NTI1500 h
15.25 0/-0.027 15.25 120 178 1 P138N1525 h
15.50 0/-0.027 15.5 120 178 1 P138N1550 hP138NTI1550 h
15.75 0/-0.027 15.75 120 178 1 P138N1575 h
16.00 0/-0.027 16 120 178 1 P138N1600 hP138NTI1600 h
16.25 0/-0.027 16.25 125 184 1 P138N1625 h
16.50 0/-0.027 16.5 125 184 1 P138N1650 h
16.75 0/-0.027 16.75 125 184 1 P138N1675 h
17.00 0/-0.027 17 125 184 1 P138N1700 h
17.50 0/-0.027 17.5 130 191 1 P138N1750 h
18.00 0/-0.027 18 130 191 1 P138N1800 h
18.50 0/-0.033 18.5 135 198 1 P138N1850 h
19.00 0/-0.033 19 135 198 1 P138N1900 h
19.50 0/-0.033 19.5 140 205 1 P138N1950 h
20.00 0/-0.033 20 140 205 1 P138N2000 h
138N 138NTI
138NA01A
Set 50 pcs.
138N DIN338 HSS
Ø1 mm÷Ø5.9 mm x 0.1 mm
138NA01B
Set 41 pcs.
138N DIN338 HSS
Ø6 mm÷Ø10 mm x 0.1 mm
138NA05C
Set 25 pcs.
138N DIN338 HSS
Ø1 mm÷Ø13 mm x 0.5 mm
HSS and HSS/Co drills
253
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
CUTTING PARAMETERS
138N
Material Group
ISO 513 P1 P2 P3 P4 K1 K2 N1 N5 N2 N3 N4
Hardness/Rm
Vc (m/min) 25-35 20-30 25-35 50-70 40-60
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
0.2 47770 0.007 330 39810 0.006 240 47770 0.008 370 95540 0.010 940 79620 0.007 560
0.5 19110 0.011 210 15920 0.009 150 19110 0.012 230 38220 0.015 590 31850 0.011 350
0.8 11940 0.013 160 9950 0.011 110 11940 0.014 170 23890 0.018 430 19900 0.013 260
19550 0.017 160 7960 0.014 120 9550 0.019 180 19110 0.024 450 15920 0.017 270
1.5 6370 0.035 220 5310 0.030 160 6370 0.039 250 12740 0.049 620 10620 0.035 370
24780 0.050 240 3980 0.043 170 4780 0.055 260 9550 0.070 670 7960 0.050 400
2.5 3820 0.060 230 3180 0.051 160 3820 0.066 250 7640 0.084 640 6370 0.060 380
33180 0.070 220 2650 0.060 160 3180 0.077 240 6370 0.098 620 5310 0.070 370
3.5 2730 0.080 220 2270 0.068 150 2730 0.088 240 5460 0.112 610 4550 0.080 360
42390 0.090 220 1990 0.077 150 2390 0.099 240 4780 0.126 600 3980 0.090 360
51910 0.100 190 1590 0.085 140 1910 0.110 210 3820 0.140 530 3180 0.100 320
61590 0.110 170 1330 0.094 120 1590 0.121 190 3180 0.154 490 2650 0.110 290
71360 0.120 160 1140 0.102 120 1360 0.132 180 2730 0.168 460 2270 0.120 270
81190 0.130 150 1000 0.111 110 1190 0.143 170 2390 0.182 430 1990 0.130 260
91060 0.140 150 880 0.119 100 1060 0.154 160 2120 0.196 420 1770 0.140 250
10 960 0.160 150 800 0.136 110 960 0.176 170 1910 0.224 430 1590 0.160 250
11 870 0.170 150 720 0.145 100 870 0.187 160 1740 0.238 410 1450 0.170 250
12 800 0.180 140 660 0.153 100 800 0.198 160 1590 0.252 400 1330 0.180 240
13 730 0.190 140 610 0.162 100 730 0.209 150 1470 0.266 390 1220 0.190 230
14 680 0.200 140 570 0.170 100 680 0.220 150 1360 0.280 380 1140 0.200 230
15 640 0.210 130 530 0.179 90 640 0.231 150 1270 0.294 370 1060 0.210 220
16 600 0.220 130 500 0.187 90 600 0.242 150 1190 0.308 370 1000 0.220 220
17 560 0.230 130 470 0.196 90 560 0.253 140 1120 0.322 360 940 0.230 220
18 530 0.240 130 440 0.204 90 530 0.264 140 1060 0.336 360 880 0.240 210
19 500 0.250 130 420 0.213 90 500 0.275 140 1010 0.350 350 840 0.250 210
20 480 0.260 120 400 0.221 90 480 0.286 140 960 0.364 350 800 0.260 210
138NTI
Material Group
ISO 513 P1 P2 P3 P4 K1 K2 N1 N5 N2 N3 N4
Hardness/Rm 500-700 N/mm² 600-1000 N/mm² 150-350 HB
Vc (m/min) 30-40 25-35 30-40 60-80 50-70
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
111150 0.017 190 9550 0.014 140 11150 0.019 210 22290 0.024 530 19110 0.017 320
1.5 7430 0.035 260 6370 0.030 190 7430 0.039 290 14860 0.049 730 12740 0.035 450
25570 0.050 280 4780 0.043 200 5570 0.055 310 11150 0.070 780 9550 0.050 480
2.5 4460 0.060 270 3820 0.051 190 4460 0.066 290 8920 0.084 750 7640 0.060 460
33720 0.070 260 3180 0.060 190 3720 0.077 290 7430 0.098 730 6370 0.070 450
3.5 3180 0.080 250 2730 0.068 190 3180 0.088 280 6370 0.112 710 5460 0.080 440
42790 0.090 250 2390 0.077 180 2790 0.099 280 5570 0.126 700 4780 0.090 430
52230 0.100 220 1910 0.085 160 2230 0.110 250 4460 0.140 620 3820 0.100 380
61860 0.110 200 1590 0.094 150 1860 0.121 230 3720 0.154 570 3180 0.110 350
71590 0.120 190 1360 0.102 140 1590 0.132 210 3180 0.168 530 2730 0.120 330
81390 0.130 180 1190 0.111 130 1390 0.143 200 2790 0.182 510 2390 0.130 310
91240 0.140 170 1060 0.119 130 1240 0.154 190 2480 0.196 490 2120 0.140 300
10 1110 0.160 180 960 0.136 130 1110 0.176 200 2230 0.224 500 1910 0.160 310
11 1010 0.170 170 870 0.145 130 1010 0.187 190 2030 0.238 480 1740 0.170 300
12 930 0.180 170 800 0.153 120 930 0.198 180 1860 0.252 470 1590 0.180 290
13 860 0.190 160 730 0.162 120 860 0.209 180 1710 0.266 450 1470 0.190 280
14 800 0.200 160 680 0.170 120 800 0.220 180 1590 0.280 450 1360 0.200 270
15 740 0.210 160 640 0.179 110 740 0.231 170 1490 0.294 440 1270 0.210 270
16 700 0.220 150 600 0.187 110 700 0.242 170 1390 0.308 430 1190 0.220 260
HSS and HSS/Co drills
254
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
h stock standard f non-standard stock m stock exhaustion
D(h8) D Tol. d l L PACKAGING EDP No. Stock
1.50 0/-0.014 1.5 18 40 10 P138HB0150 h
1.60 0/-0.014 1.6 20 43 10 P138HB0160 h
1.70 0/-0.014 1.7 20 43 10 P138HB0170 h
1.80 0/-0.014 1.8 22 46 10 P138HB0180 h
1.90 0/-0.014 1.9 22 46 10 P138HB0190 h
2.00 0/-0.014 2 24 49 10 P138HB0200 h
2.10 0/-0.014 2.1 24 49 10 P138HB0210 h
2.20 0/-0.014 2.2 27 53 10 P138HB0220 h
2.30 0/-0.014 2.3 27 53 10 P138HB0230 h
2.40 0/-0.014 2.4 30 57 10 P138HB0240 h
2.50 0/-0.014 2.5 30 57 10 P138HB0250 h
2.60 0/-0.014 2.6 30 57 10 P138HB0260 h
2.70 0/-0.014 2.7 33 61 10 P138HB0270 h
2.80 0/-0.014 2.8 33 61 10 P138HB0280 h
2.90 0/-0.014 2.9 33 61 10 P138HB0290 h
3.00 0/-0.014 3 33 61 10 P138HB0300 h
3.10 0/-0.018 3.1 36 65 10 P138HB0310 h
3.20 0/-0.018 3.2 36 65 10 P138HB0320 h
3.30 0/-0.018 3.3 36 65 10 P138HB0330 h
3.40 0/-0.018 3.4 39 70 10 P138HB0340 h
3.50 0/-0.018 3.5 39 70 10 P138HB0350 h
3.60 0/-0.018 3.6 39 70 10 P138HB0360 h
3.70 0/-0.018 3.7 39 70 10 P138HB0370 h
3.80 0/-0.018 3.8 43 75 10 P138HB0380 h
3.90 0/-0.018 3.9 43 75 10 P138HB0390 h
4.00 0/-0.018 4 43 75 10 P138HB0400 h
4.10 0/-0.018 4.1 43 75 10 P138HB0410 h
4.20 0/-0.018 4.2 43 75 10 P138HB0420 h
4.30 0/-0.018 4.3 47 80 10 P138HB0430 h
4.40 0/-0.018 4.4 47 80 10 P138HB0440 f
4.50 0/-0.018 4.5 47 80 10 P138HB0450 h
4.60 0/-0.018 4.6 47 80 10 P138HB0460 h
4.70 0/-0.018 4.7 47 80 10 P138HB0470 h
4.80 0/-0.018 4.8 52 86 10 P138HB0480 h
4.90 0/-0.018 4.9 52 86 10 P138HB0490 f
5.00 0/-0.018 5 52 86 10 P138HB0500 h
5.10 0/-0.018 5.1 52 86 10 P138HB0510 f
5.20 0/-0.018 5.2 52 86 10 P138HB0520 f
5.30 0/-0.018 5.3 52 86 10 P138HB0530 f
138HB
HB type for brass, short
DIN
338
PMKNSH
+
+ 1st choice , suitable
HSS and HSS/Co drills
255
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
h stock standard f non-standard stock m stock exhaustion
D(h8) D Tol. d l L PACKAGING EDP No. Stock
5.40 0/-0.018 5.4 57 93 10 P138HB0540 f
5.50 0/-0.018 5.5 57 93 10 P138HB0550 h
5.60 0/-0.018 5.6 57 93 10 P138HB0560 f
5.70 0/-0.018 5.7 57 93 10 P138HB0570 f
5.80 0/-0.018 5.8 57 93 10 P138HB0580 f
5.90 0/-0.018 5.9 57 93 10 P138HB0590 f
6.00 0/-0.018 6 57 93 10 P138HB0600 h
6.10 0/-0.022 6.1 63 101 10 P138HB0610 f
6.20 0/-0.022 6.2 63 101 10 P138HB0620 f
6.30 0/-0.022 6.3 63 101 10 P138HB0630 f
6.40 0/-0.022 6.4 63 101 10 P138HB0640 f
6.50 0/-0.022 6.5 63 101 10 P138HB0650 h
6.60 0/-0.022 6.6 63 101 5 P138HB0660 f
6.70 0/-0.022 6.7 63 101 5 P138HB0670 f
6.80 0/-0.022 6.8 69 109 5 P138HB0680 f
6.90 0/-0.022 6.9 69 109 5 P138HB0690 f
7.00 0/-0.022 7 69 109 5 P138HB0700 h
7.10 0/-0.022 7.1 69 109 5 P138HB0710 f
7.20 0/-0.022 7.2 69 109 5 P138HB0720 f
7.30 0/-0.022 7.3 69 109 5 P138HB0730 f
7.40 0/-0.022 7.4 69 109 5 P138HB0740 f
7.50 0/-0.022 7.5 69 109 5 P138HB0750 h
7.60 0/-0.022 7.6 75 117 5 P138HB0760 f
7.70 0/-0.022 7.7 75 117 5 P138HB0770 f
7.80 0/-0.022 7.8 75 117 5 P138HB0780 h
7.90 0/-0.022 7.9 75 117 5 P138HB0790 f
8.00 0/-0.022 8 75 117 5 P138HB0800 h
8.10 0/-0.022 8.1 75 117 5 P138HB0810 f
8.20 0/-0.022 8.2 75 117 5 P138HB0820 f
8.30 0/-0.022 8.3 75 117 5 P138HB0830 f
8.40 0/-0.022 8.4 75 117 5 P138HB0840 f
8.50 0/-0.022 8.5 75 117 5 P138HB0850 h
8.60 0/-0.022 8.6 81 125 5 P138HB0860 f
8.70 0/-0.022 8.7 81 125 5 P138HB0870 f
8.80 0/-0.022 8.8 81 125 5 P138HB0880 f
8.90 0/-0.022 8.9 81 125 5 P138HB0890 f
9.00 0/-0.022 9 81 125 5 P138HB0900 h
9.10 0/-0.022 9.1 81 125 5 P138HB0910 f
9.20 0/-0.022 9.2 81 125 5 P138HB0920 f
138HB
HB type for brass, short
DIN
338
PMKNSH
+
+ 1st choice , suitable
HSS and HSS/Co drills
256
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
h stock standard f non-standard stock m stock exhaustion
D(h8) D Tol. d l L PACKAGING EDP No. Stock
9.30 0/-0.022 9.3 81 125 5 P138HB0930 f
9.40 0/-0.022 9.4 81 125 5 P138HB0940 f
9.50 0/-0.022 9.5 81 125 5 P138HB0950 h
9.60 0/-0.022 9.6 87 133 5 P138HB0960 f
9.70 0/-0.022 9.7 87 133 5 P138HB0970 f
9.80 0/-0.022 9.8 87 133 5 P138HB0980 f
9.90 0/-0.022 9.9 87 133 5 P138HB0990 f
10.00 0/-0.022 10 87 133 5 P138HB1000 h
138HB
HB type for brass, short
DIN
338
PMKNSH
+
+ 1st choice , suitable
HSS and HSS/Co drills
257
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
CUTTING PARAMETERS
138HB
Material Group
ISO 513 N4
Hardness/Rm
Vc (m/min) 40-60
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
1.5 10620 0.065 690
27960 0.080 640
2.5 6370 0.090 570
35310 0.100 530
3.5 4550 0.110 500
43980 0.120 480
4.5 3540 0.130 460
53180 0.140 450
62650 0.160 420
72270 0.180 410
81990 0.200 400
91770 0.220 390
10 1590 0.250 400
HSS and HSS/Co drills
258
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
h stock standard f non-standard stock m stock exhaustion
D(h8) D Tol. d l L PACKAGING EDP No. Stock
1.50 0/-0.014 1.5 18 40 10 P138WB0150 h
1.60 0/-0.014 1.6 20 43 10 P138WB0160 f
1.70 0/-0.014 1.7 20 43 10 P138WB0170 f
1.80 0/-0.014 1.8 22 46 10 P138WB0180 f
1.90 0/-0.014 1.9 22 46 10 P138WB0190 f
2.00 0/-0.014 2 24 49 10 P138WB0200 h
2.10 0/-0.014 2.1 24 49 10 P138WB0210 f
2.20 0/-0.014 2.2 27 53 10 P138WB0220 h
2.30 0/-0.014 2.3 27 53 10 P138WB0230 f
2.40 0/-0.014 2.4 30 57 10 P138WB0240 h
2.50 0/-0.014 2.5 30 57 10 P138WB0250 h
2.60 0/-0.014 2.6 30 57 10 P138WB0260 h
2.70 0/-0.014 2.7 33 61 10 P138WB0270 f
2.80 0/-0.014 2.8 33 61 10 P138WB0280 h
2.90 0/-0.014 2.9 33 61 10 P138WB0290 f
3.00 0/-0.014 3 33 61 10 P138WB0300 h
3.10 0/-0.018 3.1 36 65 10 P138WB0310 h
3.20 0/-0.018 3.2 36 65 10 P138WB0320 h
3.30 0/-0.018 3.3 36 65 10 P138WB0330 h
3.40 0/-0.018 3.4 39 70 10 P138WB0340 h
3.50 0/-0.018 3.5 39 70 10 P138WB0350 h
3.60 0/-0.018 3.6 39 70 10 P138WB0360 h
3.70 0/-0.018 3.7 39 70 10 P138WB0370 h
3.80 0/-0.018 3.8 43 75 10 P138WB0380 h
3.90 0/-0.018 3.9 43 75 10 P138WB0390 h
4.00 0/-0.018 4 43 75 10 P138WB0400 h
4.10 0/-0.018 4.1 43 75 10 P138WB0410 h
4.20 0/-0.018 4.2 43 75 10 P138WB0420 h
4.30 0/-0.018 4.3 47 80 10 P138WB0430 f
4.40 0/-0.018 4.4 47 80 10 P138WB0440 f
4.50 0/-0.018 4.5 47 80 10 P138WB0450 h
4.60 0/-0.018 4.6 47 80 10 P138WB0460 h
4.70 0/-0.018 4.7 47 80 10 P138WB0470 f
4.80 0/-0.018 4.8 52 86 10 P138WB0480 h
4.90 0/-0.018 4.9 52 86 10 P138WB0490 h
5.00 0/-0.018 5 52 86 10 P138WB0500 h
5.10 0/-0.018 5.1 52 86 10 P138WB0510 f
5.20 0/-0.018 5.2 52 86 10 P138WB0520 h
5.30 0/-0.018 5.3 52 86 10 P138WB0530 f
138WB
WB type for aluminium, short
DIN
338
PMKNSH
+
+ 1st choice , suitable
HSS and HSS/Co drills
259
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
h stock standard f non-standard stock m stock exhaustion
D(h8) D Tol. d l L PACKAGING EDP No. Stock
5.40 0/-0.018 5.4 57 93 10 P138WB0540 f
5.50 0/-0.018 5.5 57 93 10 P138WB0550 h
5.60 0/-0.018 5.6 57 93 10 P138WB0560 h
5.70 0/-0.018 5.7 57 93 10 P138WB0570 f
5.80 0/-0.018 5.8 57 93 10 P138WB0580 f
5.90 0/-0.018 5.9 57 93 10 P138WB0590 f
6.00 0/-0.018 6 57 93 10 P138WB0600 h
6.10 0/-0.022 6.1 63 101 10 P138WB0610 f
6.20 0/-0.022 6.2 63 101 10 P138WB0620 f
6.30 0/-0.022 6.3 63 101 10 P138WB0630 f
6.40 0/-0.022 6.4 63 101 10 P138WB0640 f
6.50 0/-0.022 6.5 63 101 10 P138WB0650 h
6.60 0/-0.022 6.6 63 101 5 P138WB0660 f
6.70 0/-0.022 6.7 63 101 5 P138WB0670 f
6.80 0/-0.022 6.8 69 109 5 P138WB0680 h
6.90 0/-0.022 6.9 69 109 5 P138WB0690 f
7.00 0/-0.022 7 69 109 5 P138WB0700 h
7.10 0/-0.022 7.1 69 109 5 P138WB0710 f
7.20 0/-0.022 7.2 69 109 5 P138WB0720 f
7.30 0/-0.022 7.3 69 109 5 P138WB0730 f
7.40 0/-0.022 7.4 69 109 5 P138WB0740 f
7.50 0/-0.022 7.5 69 109 5 P138WB0750 h
7.60 0/-0.022 7.6 75 117 5 P138WB0760 f
7.70 0/-0.022 7.7 75 117 5 P138WB0770 f
7.80 0/-0.022 7.8 75 117 5 P138WB0780 f
7.90 0/-0.022 7.9 75 117 5 P138WB0790 f
8.00 0/-0.022 8 75 117 5 P138WB0800 h
8.10 0/-0.022 8.1 75 117 5 P138WB0810 f
8.20 0/-0.022 8.2 75 117 5 P138WB0820 h
8.30 0/-0.022 8.3 75 117 5 P138WB0830 f
8.40 0/-0.022 8.4 75 117 5 P138WB0840 f
8.50 0/-0.022 8.5 75 117 5 P138WB0850 h
8.60 0/-0.022 8.6 81 125 5 P138WB0860 f
8.70 0/-0.022 8.7 81 125 5 P138WB0870 f
8.80 0/-0.022 8.8 81 125 5 P138WB0880 f
8.90 0/-0.022 8.9 81 125 5 P138WB0890 f
9.00 0/-0.022 9 81 125 5 P138WB0900 h
9.10 0/-0.022 9.1 81 125 5 P138WB0910 f
9.20 0/-0.022 9.2 81 125 5 P138WB0920 f
138WB
WB type for aluminium, short
DIN
338
PMKNSH
+
+ 1st choice , suitable
HSS and HSS/Co drills
260
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
h stock standard f non-standard stock m stock exhaustion
D(h8) D Tol. d l L PACKAGING EDP No. Stock
9.30 0/-0.022 9.3 81 125 5 P138WB0930 f
9.40 0/-0.022 9.4 81 125 5 P138WB0940 f
9.50 0/-0.022 9.5 81 125 5 P138WB0950 h
9.60 0/-0.022 9.6 87 133 5 P138WB0960 f
9.70 0/-0.022 9.7 87 133 5 P138WB0970 f
9.80 0/-0.022 9.8 87 133 5 P138WB0980 f
9.90 0/-0.022 9.9 87 133 5 P138WB0990 f
10.00 0/-0.022 10 87 133 5 P138WB1000 h
138WB
WB type for aluminium, short
DIN
338
PMKNSH
+
+ 1st choice , suitable
HSS and HSS/Co drills
261
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
CUTTING PARAMETERS
138WB
Material Group
ISO 513 N1 N2 N3
Hardness/Rm
Vc (m/min) 40-60 30-50 25-45
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
1.5 10620 0.070 740 8490 0.063 530 7430 0.060 440
27962 0.080 640 6369 0.072 460 5573 0.068 380
2.5 6369 0.090 570 5096 0.081 410 4459 0.077 340
35308 0.100 530 4246 0.090 380 3715 0.085 320
3.5 4550 0.110 500 3640 0.099 360 3185 0.094 300
43981 0.120 480 3185 0.108 340 2787 0.102 280
4.5 3539 0.130 460 2831 0.117 330 2477 0.111 270
53185 0.140 450 2548 0.126 320 2229 0.119 270
62654 0.160 420 2123 0.144 310 1858 0.136 250
72275 0.180 410 1820 0.162 290 1592 0.153 240
81990 0.200 400 1592 0.180 290 1393 0.170 240
91769 0.220 390 1415 0.198 280 1238 0.187 230
10 1592 0.250 400 1274 0.225 290 1115 0.213 240
HSS and HSS/Co drills
262
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
h stock standard f non-standard stock m stock exhaustion
D(h8) D Tol. d l L PACKAGING EDP No. Stock
1.00 0/-0.014 1 12 34 10 P2385NTI0100 h
1.10 0/-0.014 1.1 14 36 10 P2385NTI0110 h
1.20 0/-0.014 1.2 16 38 10 P2385NTI0120 h
1.30 0/-0.014 1.3 16 38 10 P2385NTI0130 h
1.40 0/-0.014 1.4 18 40 10 P2385NTI0140 h
1.50 0/-0.014 1.5 18 40 10 P2385NTI0150 h
1.60 0/-0.014 1.6 20 43 10 P2386STI0160 h
1.70 0/-0.014 1.7 20 43 10 P2386STI0170 h
1.80 0/-0.014 1.8 22 46 10 P2386STI0180 h
1.90 0/-0.014 1.9 22 46 10 P2386STI0190 h
2.00 0/-0.014 2 24 49 10 P2386STI0200 h
2.10 0/-0.014 2.1 24 49 10 P2386STI0210 h
2.20 0/-0.014 2.2 27 53 10 P2386STI0220 h
2.30 0/-0.014 2.3 27 53 10 P2386STI0230 h
2.40 0/-0.014 2.4 30 57 10 P2386STI0240 h
2.50 0/-0.014 2.5 30 57 10 P2386STI0250 h
2.60 0/-0.014 2.6 30 57 10 P2386STI0260 h
2.70 0/-0.014 2.7 33 61 10 P2386STI0270 h
2.80 0/-0.014 2.8 33 61 10 P2386STI0280 h
2.90 0/-0.014 2.9 33 61 10 P2386STI0290 h
3.00 0/-0.014 3 33 61 10 P2386STI0300 h
3.10 0/-0.018 3.1 36 65 10 P2386STI0310 h
3.20 0/-0.018 3.2 36 65 10 P2386STI0320 h
3.30 0/-0.018 3.3 36 65 10 P2386STI0330 h
3.40 0/-0.018 3.4 39 70 10 P2386STI0340 h
3.50 0/-0.018 3.5 39 70 10 P2386STI0350 h
3.60 0/-0.018 3.6 39 70 10 P2386STI0360 h
3.70 0/-0.018 3.7 39 70 10 P2386STI0370 h
3.80 0/-0.018 3.8 43 75 10 P2386STI0380 h
3.90 0/-0.018 3.9 43 75 10 P2386STI0390 h
4.00 0/-0.018 4 43 75 10 P2386STI0400 h
4.10 0/-0.018 4.1 43 75 10 P2386STI0410 h
4.20 0/-0.018 4.2 43 75 10 P2386STI0420 h
4.30 0/-0.018 4.3 47 80 10 P2386STI0430 h
4.40 0/-0.018 4.4 47 80 10 P2386STI0440 h
4.50 0/-0.018 4.5 47 80 10 P2386STI0450 h
4.60 0/-0.018 4.6 47 80 10 P2386STI0460 h
4.70 0/-0.018 4.7 47 80 10 P2386STI0470 h
4.80 0/-0.018 4.8 52 86 10 P2386STI0480 h
2386STI
STI type for tough materials, split point, TiN pointed, short
DIN
338 135°
PMKNSH
+0+,,
+ 1st choice , suitable
HSS and HSS/Co drills
263
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
h stock standard f non-standard stock m stock exhaustion
D(h8) D Tol. d l L PACKAGING EDP No. Stock
4.90 0/-0.018 4.9 52 86 10 P2386STI0490 h
5.00 0/-0.018 5 52 86 10 P2386STI0500 h
5.10 0/-0.018 5.1 52 86 10 P2386STI0510 h
5.20 0/-0.018 5.2 52 86 10 P2386STI0520 h
5.30 0/-0.018 5.3 52 86 10 P2386STI0530 h
5.40 0/-0.018 5.4 57 93 10 P2386STI0540 h
5.50 0/-0.018 5.5 57 93 10 P2386STI0550 h
5.60 0/-0.018 5.6 57 93 10 P2386STI0560 h
5.70 0/-0.018 5.7 57 93 10 P2386STI0570 h
5.80 0/-0.018 5.8 57 93 10 P2386STI0580 h
5.90 0/-0.018 5.9 57 93 10 P2386STI0590 h
6.00 0/-0.018 6 57 93 10 P2386STI0600 h
6.10 0/-0.022 6.1 63 101 10 P2386STI0610 h
6.20 0/-0.022 6.2 63 101 10 P2386STI0620 h
6.30 0/-0.022 6.3 63 101 10 P2386STI0630 h
6.40 0/-0.022 6.4 63 101 10 P2386STI0640 h
6.50 0/-0.022 6.5 63 101 10 P2386STI0650 h
6.60 0/-0.022 6.6 63 101 5 P2386STI0660 h
6.70 0/-0.022 6.7 63 101 5 P2386STI0670 h
6.80 0/-0.022 6.8 69 109 5 P2386STI0680 h
6.90 0/-0.022 6.9 69 109 5 P2386STI0690 h
7.00 0/-0.022 7 69 109 5 P2386STI0700 h
7.10 0/-0.022 7.1 69 109 5 P2386STI0710 h
7.20 0/-0.022 7.2 69 109 5 P2386STI0720 h
7.30 0/-0.022 7.3 69 109 5 P2386STI0730 h
7.40 0/-0.022 7.4 69 109 5 P2386STI0740 h
7.50 0/-0.022 7.5 69 109 5 P2386STI0750 h
7.60 0/-0.022 7.6 75 117 5 P2386STI0760 h
7.70 0/-0.022 7.7 75 117 5 P2386STI0770 h
7.80 0/-0.022 7.8 75 117 5 P2386STI0780 h
7.90 0/-0.022 7.9 75 117 5 P2386STI0790 h
8.00 0/-0.022 8 75 117 5 P2386STI0800 h
8.10 0/-0.022 8.1 75 117 5 P2386STI0810 h
8.20 0/-0.022 8.2 75 117 5 P2386STI0820 h
8.30 0/-0.022 8.3 75 117 5 P2386STI0830 h
8.40 0/-0.022 8.4 75 117 5 P2386STI0840 h
8.50 0/-0.022 8.5 75 117 5 P2386STI0850 h
8.60 0/-0.022 8.6 81 125 5 P2386STI0860 h
8.70 0/-0.022 8.7 81 125 5 P2386STI0870 h
2386STI
STI type for tough materials, split point, TiN pointed, short
DIN
338 135°
PMKNSH
+0+,,
+ 1st choice , suitable
HSS and HSS/Co drills
264
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
h stock standard f non-standard stock m stock exhaustion
D(h8) D Tol. d l L PACKAGING EDP No. Stock
8.80 0/-0.022 8.8 81 125 5 P2386STI0880 h
8.90 0/-0.022 8.9 81 125 5 P2386STI0890 h
9.00 0/-0.022 9 81 125 5 P2386STI0900 h
9.10 0/-0.022 9.1 81 125 5 P2386STI0910 h
9.20 0/-0.022 9.2 81 125 5 P2386STI0920 h
9.30 0/-0.022 9.3 81 125 5 P2386STI0930 h
9.40 0/-0.022 9.4 81 125 5 P2386STI0940 h
9.50 0/-0.022 9.5 81 125 5 P2386STI0950 h
9.60 0/-0.022 9.6 87 133 5 P2386STI0960 h
9.70 0/-0.022 9.7 87 133 5 P2386STI0970 h
9.80 0/-0.022 9.8 87 133 5 P2386STI0980 h
9.90 0/-0.022 9.9 87 133 5 P2386STI0990 h
10.00 0/-0.022 10 87 133 5 P2386STI1000 h
10.10 0/-0.027 10.1 87 133 5 P2386STI1010 h
10.20 0/-0.027 10.2 87 133 5 P2386STI1020 h
10.30 0/-0.027 10.3 87 133 5 P2386STI1030 h
10.40 0/-0.027 10.4 87 133 5 P2386STI1040 h
10.50 0/-0.027 10.5 87 133 5 P2386STI1050 h
10.60 0/-0.027 10.6 87 133 5 P2386STI1060 h
10.70 0/-0.027 10.7 94 142 5 P2386STI1070 h
10.80 0/-0.027 10.8 94 142 5 P2386STI1080 h
10.90 0/-0.027 10.9 94 142 5 P2386STI1090 h
11.00 0/-0.027 11 94 142 5 P2386STI1100 h
11.10 0/-0.027 11.1 94 142 5 P2386STI1110 h
11.20 0/-0.027 11.2 94 142 5 P2386STI1120 h
11.30 0/-0.027 11.3 94 142 5 P2386STI1130 h
11.40 0/-0.027 11.4 94 142 5 P2386STI1140 h
11.50 0/-0.027 11.5 94 142 5 P2386STI1150 h
11.60 0/-0.027 11.6 94 142 5 P2386STI1160 h
11.70 0/-0.027 11.7 94 142 5 P2386STI1170 h
11.80 0/-0.027 11.8 94 142 5 P2386STI1180 h
11.90 0/-0.027 11.9 101 151 5 P2386STI1190 h
12.00 0/-0.027 12 101 151 5 P2386STI1200 h
12.10 0/-0.027 12.1 101 151 5 P2386STI1210 h
12.20 0/-0.027 12.2 101 151 5 P2386STI1220 h
12.30 0/-0.027 12.3 101 151 5 P2386STI1230 h
12.40 0/-0.027 12.4 101 151 5 P2386STI1240 h
12.50 0/-0.027 12.5 101 151 5 P2386STI1250 h
12.60 0/-0.027 12.6 101 151 5 P2386STI1260 h
2386STI
STI type for tough materials, split point, TiN pointed, short
DIN
338 135°
PMKNSH
+++,,
+ 1st choice , suitable
HSS and HSS/Co drills
265
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
h stock standard f non-standard stock m stock exhaustion
D(h8) D Tol. d l L PACKAGING EDP No. Stock
12.70 0/-0.027 12.7 101 151 5 P2386STI1270 h
12.80 0/-0.027 12.8 101 151 5 P2386STI1280 h
12.90 0/-0.027 12.9 101 151 5 P2386STI1290 h
13.00 0/-0.027 13 101 151 5 P2386STI1300 h
2386STI
STI type for tough materials, split point, TiN pointed, short
DIN
338 135°
PMKNSH
+0+,,
+ 1st choice , suitable
2386STIA01A
Set 50pcs.
2386STI DIN338 HSS/Co TIN POINTED
Ø1 mm÷Ø5.9 mm x 0.1 mm
2386STIA01B
Set 41pcs.
2386STI DIN338 HSS/Co TIN POINTED
Ø6 mm÷Ø10 mm x 0.1 mm
2386STIA05C
Set 25pcs.
2386STI DIN338 HSS/Co TIN POINTED
Ø1 mm÷Ø13 mm x 0.5 mm
HSS and HSS/Co drills
266
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
CUTTING PARAMETERS
2386STI
Material Group
ISO 513 P1 P2 P3 P4 M1 M2 M3 K1 K2
Hardness/Rm 500-700 N/mm² 600-1000 N/mm² < 750 N/mm² 550-850 N/mm² 150-350 HB
Vc (m/min) 30-40 25-35 15-25 12-18 30-40
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
111150 0.017 190 9550 0.014 140 6370 0.012 80 4780 0.009 40 11150 0.019 210
1.5 7430 0.035 260 6370 0.030 190 4250 0.025 100 3180 0.018 55 7430 0.039 290
25570 0.050 280 4780 0.043 200 3180 0.035 110 2390 0.025 60 5570 0.055 310
2.5 4460 0.075 330 3820 0.064 240 2550 0.053 130 1910 0.038 70 4460 0.083 370
33720 0.090 330 3180 0.077 240 2120 0.063 130 1590 0.045 70 3720 0.099 370
3.5 3180 0.105 330 2730 0.089 240 1820 0.074 130 1360 0.053 70 3180 0.116 370
42790 0.110 310 2390 0.094 220 1590 0.077 120 1190 0.055 65 2790 0.121 340
52230 0.125 280 1910 0.106 200 1270 0.088 110 960 0.063 60 2230 0.138 310
61860 0.160 300 1590 0.136 220 1060 0.112 120 800 0.080 65 1860 0.176 330
71590 0.175 280 1360 0.149 200 910 0.123 110 680 0.088 60 1590 0.193 310
81390 0.200 280 1190 0.170 200 800 0.140 110 600 0.100 60 1390 0.220 310
91240 0.210 260 1060 0.179 190 710 0.147 100 530 0.105 55 1240 0.231 290
10 1110 0.220 240 960 0.187 180 640 0.154 100 480 0.110 55 1110 0.242 270
11 1010 0.235 240 870 0.200 170 580 0.165 100 430 0.118 50 1010 0.259 260
12 930 0.250 230 800 0.213 170 530 0.175 90 400 0.125 50 930 0.275 260
13 860 0.265 230 730 0.225 160 490 0.186 90 370 0.133 50 860 0.292 250
Material Group
ISO 513 K3 K4 N1 N5 N2 N3 N4 S1 S2 S4
Hardness/Rm < 350 HB < 35 HRC
Vc (m/min) 25-35 60-80 50-70 12-18
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
19550 0.013 120 22290 0.024 530 19110 0.017 320 4780 0.007 35
1.5 6370 0.026 170 14860 0.049 730 12740 0.035 450 3180 0.014 45
24780 0.038 180 11150 0.070 780 9550 0.050 480 2390 0.020 50
2.5 3820 0.056 210 8920 0.105 940 7640 0.075 570 1910 0.030 55
33180 0.068 210 7430 0.126 940 6370 0.090 570 1590 0.036 55
3.5 2730 0.079 210 6370 0.147 940 5460 0.105 570 1360 0.042 55
42390 0.083 200 5570 0.154 860 4780 0.110 530 1190 0.044 50
51910 0.094 180 4460 0.175 780 3820 0.125 480 960 0.050 50
61590 0.120 190 3720 0.224 830 3180 0.160 510 800 0.064 50
71360 0.131 180 3180 0.245 780 2730 0.175 480 680 0.070 50
81190 0.150 180 2790 0.280 780 2390 0.200 480 600 0.080 50
91060 0.158 170 2480 0.294 730 2120 0.210 450 530 0.084 45
10 960 0.165 160 2230 0.308 690 1910 0.220 420 480 0.088 40
11 870 0.176 150 2030 0.329 670 1740 0.235 410 430 0.094 40
12 800 0.188 150 1860 0.350 650 1590 0.250 400 400 0.100 40
13 730 0.199 150 1710 0.371 630 1470 0.265 390 370 0.106 40
HSS and HSS/Co drills
267
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
h stock standard f non-standard stock m stock exhaustion
D(h8) D Tol. d l L PACKAGING EDP No. Stock
1.00 0/-0.014 1 12 34 10 P238NVA0100 h
1.10 0/-0.014 1.1 14 36 10 P238NVA0110 h
1.20 0/-0.014 1.2 16 38 10 P238NVA0120 h
1.25 0/-0.014 1.25 16 38 10 P238NVA0125 h
1.30 0/-0.014 1.3 16 38 10 P238NVA0130 h
1.40 0/-0.014 1.4 18 40 10 P238NVA0140 h
1.50 0/-0.014 1.5 18 40 10 P238NVA0150 h
1.60 0/-0.014 1.6 20 43 10 P238NVA0160 h
1.70 0/-0.014 1.7 20 43 10 P238NVA0170 h
1.75 0/-0.014 1.75 22 46 10 P238NVA0175 h
1.80 0/-0.014 1.8 22 46 10 P238NVA0180 h
1.90 0/-0.014 1.9 22 46 10 P238NVA0190 h
2.00 0/-0.014 2 24 49 10 P238NVA0200 h
2.10 0/-0.014 2.1 24 49 10 P238NVA0210 h
2.20 0/-0.014 2.2 27 53 10 P238NVA0220 h
2.25 0/-0.014 2.25 27 53 10 P238NVA0225 h
2.30 0/-0.014 2.3 27 53 10 P238NVA0230 h
2.40 0/-0.014 2.4 30 57 10 P238NVA0240 h
2.50 0/-0.014 2.5 30 57 10 P238NVA0250 h
2.60 0/-0.014 2.6 30 57 10 P238NVA0260 h
2.70 0/-0.014 2.7 33 61 10 P238NVA0270 h
2.75 0/-0.014 2.75 33 61 10 P238NVA0275 h
2.80 0/-0.014 2.8 33 61 10 P238NVA0280 h
2.90 0/-0.014 2.9 33 61 10 P238NVA0290 h
3.00 0/-0.014 3 33 61 10 P238NVA0300 h
3.10 0/-0.018 3.1 36 65 10 P238NVA0310 h
3.20 0/-0.018 3.2 36 65 10 P238NVA0320 h
3.25 0/-0.018 3.25 36 65 10 P238NVA0325 h
3.30 0/-0.018 3.3 36 65 10 P238NVA0330 h
3.40 0/-0.018 3.4 39 70 10 P238NVA0340 h
3.50 0/-0.018 3.5 39 70 10 P238NVA0350 h
3.60 0/-0.018 3.6 39 70 10 P238NVA0360 h
3.70 0/-0.018 3.7 39 70 10 P238NVA0370 h
3.75 0/-0.018 3.75 39 70 10 P238NVA0375 h
3.80 0/-0.018 3.8 43 75 10 P238NVA0380 h
3.90 0/-0.018 3.9 43 75 10 P238NVA0390 h
4.00 0/-0.018 4 43 75 10 P238NVA0400 h
4.10 0/-0.018 4.1 43 75 10 P238NVA0410 h
4.20 0/-0.018 4.2 43 75 10 P238NVA0420 h
238NVA
NVA type for tough materials, short
DIN
338
PMKNSH
++,,,
+ 1st choice , suitable
HSS and HSS/Co drills
268
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
238NVA
NVA type for tough materials, short
DIN
338
PMKNSH
++,,,
+ 1st choice , suitable
h stock standard f non-standard stock m stock exhaustion
D(h8) D Tol. d l L PACKAGING EDP No. Stock
4.25 0/-0.018 4.25 43 75 10 P238NVA0425 h
4.30 0/-0.018 4.3 47 80 10 P238NVA0430 h
4.40 0/-0.018 4.4 47 80 10 P238NVA0440 h
4.50 0/-0.018 4.5 47 80 10 P238NVA0450 h
4.60 0/-0.018 4.6 47 80 10 P238NVA0460 h
4.70 0/-0.018 4.7 47 80 10 P238NVA0470 h
4.75 0/-0.018 4.75 47 80 10 P238NVA0475 h
4.80 0/-0.018 4.8 52 86 10 P238NVA0480 h
4.90 0/-0.018 4.9 52 86 10 P238NVA0490 h
5.00 0/-0.018 5 52 86 10 P238NVA0500 h
5.10 0/-0.018 5.1 52 86 10 P238NVA0510 h
5.20 0/-0.018 5.2 52 86 10 P238NVA0520 h
5.25 0/-0.018 5.25 52 86 10 P238NVA0525 h
5.30 0/-0.018 5.3 52 86 10 P238NVA0530 h
5.40 0/-0.018 5.4 57 93 10 P238NVA0540 h
5.50 0/-0.018 5.5 57 93 10 P238NVA0550 h
5.60 0/-0.018 5.6 57 93 10 P238NVA0560 h
5.70 0/-0.018 5.7 57 93 10 P238NVA0570 h
5.75 0/-0.018 5.75 57 93 10 P238NVA0575 h
5.80 0/-0.018 5.8 57 93 10 P238NVA0580 h
5.90 0/-0.018 5.9 57 93 10 P238NVA0590 h
6.00 0/-0.018 6 57 93 10 P238NVA0600 h
6.10 0/-0.022 6.1 63 101 10 P238NVA0610 h
6.20 0/-0.022 6.2 63 101 10 P238NVA0620 h
6.25 0/-0.022 6.25 63 101 10 P238NVA0625 h
6.30 0/-0.022 6.3 63 101 10 P238NVA0630 h
6.40 0/-0.022 6.4 63 101 10 P238NVA0640 h
6.50 0/-0.022 6.5 63 101 10 P238NVA0650 h
6.60 0/-0.022 6.6 63 101 5 P238NVA0660 h
6.70 0/-0.022 6.7 63 101 5 P238NVA0670 h
6.75 0/-0.022 6.75 69 109 5 P238NVA0675 h
6.80 0/-0.022 6.8 69 109 5 P238NVA0680 h
6.90 0/-0.022 6.9 69 109 5 P238NVA0690 h
7.00 0/-0.022 7 69 109 5 P238NVA0700 h
7.10 0/-0.022 7.1 69 109 5 P238NVA0710 h
7.20 0/-0.022 7.2 69 109 5 P238NVA0720 h
7.25 0/-0.022 7.25 69 109 5 P238NVA0725 h
7.30 0/-0.022 7.3 69 109 5 P238NVA0730 h
7.40 0/-0.022 7.4 69 109 5 P238NVA0740 h
HSS and HSS/Co drills
269
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
h stock standard f non-standard stock m stock exhaustion
D(h8) D Tol. d l L PACKAGING EDP No. Stock
7.50 0/-0.022 7.5 69 109 5 P238NVA0750 h
7.60 0/-0.022 7.6 75 117 5 P238NVA0760 h
7.70 0/-0.022 7.7 75 117 5 P238NVA0770 h
7.75 0/-0.022 7.75 75 117 5 P238NVA0775 h
7.80 0/-0.022 7.8 75 117 5 P238NVA0780 h
7.90 0/-0.022 7.9 75 117 5 P238NVA0790 h
8.00 0/-0.022 8 75 117 5 P238NVA0800 h
8.10 0/-0.022 8.1 75 117 5 P238NVA0810 h
8.20 0/-0.022 8.2 75 117 5 P238NVA0820 h
8.25 0/-0.022 8.25 75 117 5 P238NVA0825 h
8.30 0/-0.022 8.3 75 117 5 P238NVA0830 h
8.40 0/-0.022 8.4 75 117 5 P238NVA0840 h
8.50 0/-0.022 8.5 75 117 5 P238NVA0850 h
8.60 0/-0.022 8.6 81 125 5 P238NVA0860 h
8.70 0/-0.022 8.7 81 125 5 P238NVA0870 h
8.75 0/-0.022 8.75 81 125 5 P238NVA0875 h
8.80 0/-0.022 8.8 81 125 5 P238NVA0880 h
8.90 0/-0.022 8.9 81 125 5 P238NVA0890 h
9.00 0/-0.022 9 81 125 5 P238NVA0900 h
9.10 0/-0.022 9.1 81 125 5 P238NVA0910 h
9.20 0/-0.022 9.2 81 125 5 P238NVA0920 h
9.25 0/-0.022 9.25 81 125 5 P238NVA0925 h
9.30 0/-0.022 9.3 81 125 5 P238NVA0930 h
9.40 0/-0.022 9.4 81 125 5 P238NVA0940 h
9.50 0/-0.022 9.5 81 125 5 P238NVA0950 h
9.60 0/-0.022 9.6 87 133 5 P238NVA0960 h
9.70 0/-0.022 9.7 87 133 5 P238NVA0970 h
9.75 0/-0.022 9.75 87 133 5 P238NVA0975 h
9.80 0/-0.022 9.8 87 133 5 P238NVA0980 h
9.90 0/-0.022 9.9 87 133 5 P238NVA0990 h
10.00 0/-0.022 10 87 133 5 P238NVA1000 h
10.20 0/-0.027 10.2 87 133 5 P238NVA1020 h
10.50 0/-0.027 10.5 87 133 5 P238NVA1050 h
11.00 0/-0.027 11 94 142 5 P238NVA1100 h
11.50 0/-0.027 11.5 94 142 5 P238NVA1150 h
12.00 0/-0.027 12 101 151 5 P238NVA1200 h
12.50 0/-0.027 12.5 101 151 5 P238NVA1250 h
13.00 0/-0.027 13 101 151 5 P238NVA1300 h
13.50 0/-0.027 13.5 108 160 1 P238NVA1350 h
238NVA
NVA type for tough materials, short
DIN
338
PMKNSH
++,,,
+ 1st choice , suitable
HSS and HSS/Co drills
270
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
238NVA
NVA type for tough materials, short
DIN
338
PMKNSH
++,,,
+ 1st choice , suitable
h stock standard f non-standard stock m stock exhaustion
D(h8) D Tol. d l L PACKAGING EDP No. Stock
14.00 0/-0.027 14 108 160 1 P238NVA1400 h
14.50 0/-0.027 14.5 114 169 1 P238NVA1450 h
15.00 0/-0.027 15 114 169 1 P238NVA1500 h
15.50 0/-0.027 15.5 120 178 1 P238NVA1550 h
16.00 0/-0.027 16 120 178 1 P238NVA1600 h
16.50 0/-0.027 16.5 125 184 1 P238NVA1650 h
17.00 0/-0.027 17 125 184 1 P238NVA1700 h
17.50 0/-0.027 17.5 130 191 1 P238NVA1750 h
18.00 0/-0.027 18 130 191 1 P238NVA1800 h
18.50 0/-0.033 18.5 135 198 1 P238NVA1850 h
19.00 0/-0.033 19 135 198 1 P238NVA1900 h
19.50 0/-0.033 19.5 140 205 1 P238NVA1950 f
20.00 0/-0.033 20 140 205 1 P238NVA2000 h
238NVAA01A
Set 50pcs.
238NVA DIN338 HSS/Co
Ø1 mm÷Ø5.9 mm x 0.1 mm
238NVAA01B
Set 41pcs.
238NVA DIN338 HSS/Co
Ø6 mm÷Ø10 mm x 0.1 mm
238NVAA05C
Set 25pcs.
238NVA DIN338 HSS/Co
Ø1 mm÷Ø13 mm x 0.5 mm
HSS and HSS/Co drills
271
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
CUTTING PARAMETERS
238NVA
Material Group
ISO 513 P1 P2 P3 P4 M1 M2 M3 M4 K1 K2
Hardness/Rm 500-700 N/mm² 600-1000 N/mm² < 750 N/mm² 550-850 N/mm² 150-350 HB
Vc (m/min) 25-35 20-30 12-18 8-12 25-35
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
19550 0.017 160 7960 0.014 120 4780 0.012 57 3180 0.009 27 9550 0.019 180
1.5 6370 0.035 220 5310 0.030 160 3180 0.025 80 2120 0.018 37 6370 0.039 250
24780 0.050 240 3980 0.043 170 2390 0.035 80 1590 0.025 40 4780 0.055 260
2.5 3820 0.060 230 3180 0.051 160 1910 0.042 80 1270 0.030 38 3820 0.066 250
33180 0.070 220 2650 0.060 160 1590 0.049 80 1060 0.035 37 3180 0.077 240
3.5 2730 0.080 220 2270 0.068 150 1360 0.056 80 910 0.040 36 2730 0.088 240
42390 0.090 220 1990 0.077 150 1190 0.063 70 800 0.045 36 2390 0.099 240
51910 0.100 190 1590 0.085 140 960 0.070 70 640 0.050 32 1910 0.110 210
61590 0.110 170 1330 0.094 120 800 0.077 60 530 0.055 29 1590 0.121 190
71360 0.120 160 1140 0.102 120 680 0.084 60 450 0.060 27 1360 0.132 180
81190 0.130 150 1000 0.111 110 600 0.091 55 400 0.065 26 1190 0.143 170
91060 0.140 150 880 0.119 100 530 0.098 52 350 0.070 25 1060 0.154 160
10 960 0.160 150 800 0.136 110 480 0.112 54 320 0.080 26 960 0.176 170
11 870 0.170 150 720 0.145 100 430 0.119 51 290 0.085 25 870 0.187 160
12 800 0.180 140 660 0.153 100 400 0.126 50 270 0.090 24 800 0.198 160
13 730 0.190 140 610 0.162 100 370 0.133 49 240 0.095 23 730 0.209 150
14 680 0.200 140 570 0.170 100 340 0.140 48 230 0.100 23 680 0.220 150
15 640 0.210 130 530 0.179 90 320 0.147 47 210 0.105 22 640 0.231 150
16 600 0.220 130 500 0.187 90 300 0.154 46 200 0.110 22 600 0.242 150
17 560 0.230 130 470 0.196 90 280 0.161 45 190 0.115 22 560 0.253 140
18 530 0.240 130 440 0.204 90 270 0.168 45 180 0.120 22 530 0.264 140
19 500 0.250 130 420 0.213 90 250 0.175 44 170 0.125 21 500 0.275 140
20 480 0.260 120 400 0.221 90 240 0.182 44 160 0.130 21 480 0.286 140
Material Group
ISO 513 K3 K4 N1 N5 N2 N3 N4 S1 S2 S4
Hardness/Rm < 350 HB < 35 HRC
Vc (m/min) 20-30 50-70 40-60 8-12
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
17960 0.013 100 19110 0.024 450 15920 0.017 270 3180 0.007 22
1.5 5310 0.026 140 12740 0.049 620 10620 0.035 370 2120 0.014 30
23980 0.038 150 9550 0.070 670 7960 0.050 400 1590 0.020 32
2.5 3180 0.045 140 7640 0.084 640 6370 0.060 380 1270 0.024 30
32650 0.053 140 6370 0.098 620 5310 0.070 370 1060 0.028 30
3.5 2270 0.060 140 5460 0.112 610 4550 0.080 360 910 0.032 29
41990 0.068 130 4780 0.126 600 3980 0.090 360 800 0.036 29
51590 0.075 120 3820 0.140 530 3180 0.100 320 640 0.040 26
61330 0.083 110 3180 0.154 490 2650 0.110 290 530 0.044 23
71140 0.090 100 2730 0.168 460 2270 0.120 270 450 0.048 22
81000 0.098 100 2390 0.182 430 1990 0.130 260 400 0.052 21
9880 0.105 90 2120 0.196 420 1770 0.140 250 350 0.056 20
10 800 0.120 100 1910 0.224 430 1590 0.160 250 320 0.064 20
11 720 0.128 90 1740 0.238 410 1450 0.170 250 290 0.068 20
12 660 0.135 90 1590 0.252 400 1330 0.180 240 270 0.072 19
13 610 0.143 90 1470 0.266 390 1220 0.190 230 240 0.076 18
14 570 0.150 90 1360 0.280 380 1140 0.200 230 230 0.080 18
15 530 0.158 80 1270 0.294 370 1060 0.210 220 210 0.084 18
16 500 0.165 80 1190 0.308 370 1000 0.220 220 200 0.088 18
17 470 0.173 80 1120 0.322 360 940 0.230 220 190 0.092 17
18 440 0.180 80 1060 0.336 360 880 0.240 210 180 0.096 17
19 420 0.188 80 1010 0.350 350 840 0.250 210 170 0.100 17
20 400 0.195 80 960 0.364 350 800 0.260 210 160 0.104 17
HSS and HSS/Co drills
272
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
h stock standard f non-standard stock m stock exhaustion
D(h8) D Tol. d l L PACKAGING EDP No. Stock
0.50 0/-0.014 0.5 12 32 10 P134NB0050 h
0.60 0/-0.014 0.6 15 35 10 P134NB0060 h
0.70 0/-0.014 0.7 21 42 10 P134NB0070 h
0.80 0/-0.014 0.8 25 46 10 P134NB0080 h
0.90 0/-0.014 0.9 29 51 10 P134NB0090 h
1.00 0/-0.014 1 33 56 10 P134NB0100 h
1.10 0/-0.014 1.1 37 60 10 P134NB0110 h
1.20 0/-0.014 1.2 41 65 10 P134NB0120 h
1.30 0/-0.014 1.3 41 65 10 P134NB0130 h
1.40 0/-0.014 1.4 45 70 10 P134NB0140 h
1.50 0/-0.014 1.5 45 70 10 P134NB0150 h
1.60 0/-0.014 1.6 50 76 10 P134NB0160 h
1.70 0/-0.014 1.7 50 76 10 P134NB0170 h
1.80 0/-0.014 1.8 53 80 10 P134NB0180 h
1.90 0/-0.014 1.9 53 80 10 P134NB0190 h
2.00 0/-0.014 2 56 85 10 P234NVA0200 h
2.10 0/-0.014 2.1 56 85 10 P234NVA0210 h
2.20 0/-0.014 2.2 59 90 10 P234NVA0220 h
2.30 0/-0.014 2.3 59 90 10 P234NVA0230 h
2.40 0/-0.014 2.4 62 95 10 P234NVA0240 h
2.50 0/-0.014 2.5 62 95 10 P234NVA0250 h
2.60 0/-0.014 2.6 62 95 10 P234NVA0260 h
2.70 0/-0.014 2.7 66 100 10 P234NVA0270 h
2.80 0/-0.014 2.8 66 100 10 P234NVA0280 h
2.90 0/-0.014 2.9 66 100 10 P234NVA0290 h
3.00 0/-0.014 3 66 100 10 P234NVA0300 h
3.10 0/-0.018 3.1 69 106 10 P234NVA0310 h
3.20 0/-0.018 3.2 69 106 10 P234NVA0320 h
3.30 0/-0.018 3.3 69 106 10 P234NVA0330 h
3.40 0/-0.018 3.4 73 112 10 P234NVA0340 h
3.50 0/-0.018 3.5 73 112 10 P234NVA0350 h
3.60 0/-0.018 3.6 73 112 10 P234NVA0360 h
3.70 0/-0.018 3.7 73 112 10 P234NVA0370 h
3.80 0/-0.018 3.8 78 119 10 P234NVA0380 h
3.90 0/-0.018 3.9 78 119 10 P234NVA0390 h
4.00 0/-0.018 4 78 119 10 P234NVA0400 h
4.10 0/-0.018 4.1 78 119 10 P234NVA0410 h
4.20 0/-0.018 4.2 78 119 10 P234NVA0420 h
4.30 0/-0.018 4.3 82 126 10 P234NVA0430 h
234NVA
NVA type for tough materials, long
DIN
340
* < Ø2 mm = HSS BR
PMKNSH
++,,,
+ 1st choice , suitable
HSS and HSS/Co drills
273
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
234NVA
NVA type for tough materials, long
DIN
340
PMKNSH
++,,,
+ 1st choice , suitable
h stock standard f non-standard stock m stock exhaustion
D(h8) D Tol. d l L PACKAGING EDP No. Stock
4.40 0/-0.018 4.4 82 126 10 P234NVA0440 h
4.50 0/-0.018 4.5 82 126 10 P234NVA0450 h
4.60 0/-0.018 4.6 82 126 10 P234NVA0460 h
4.70 0/-0.018 4.7 82 126 10 P234NVA0470 h
4.80 0/-0.018 4.8 87 132 10 P234NVA0480 h
4.90 0/-0.018 4.9 87 132 10 P234NVA0490 h
5.00 0/-0.018 5 87 132 10 P234NVA0500 h
5.10 0/-0.018 5.1 87 132 10 P234NVA0510 h
5.20 0/-0.018 5.2 87 132 10 P234NVA0520 h
5.30 0/-0.018 5.3 87 132 10 P234NVA0530 h
5.40 0/-0.018 5.4 91 139 10 P234NVA0540 h
5.50 0/-0.018 5.5 91 139 10 P234NVA0550 h
5.60 0/-0.018 5.6 91 139 10 P234NVA0560 h
5.70 0/-0.018 5.7 91 139 10 P234NVA0570 h
5.80 0/-0.018 5.8 91 139 10 P234NVA0580 h
5.90 0/-0.018 5.9 91 139 10 P234NVA0590 h
6.00 0/-0.018 6 91 139 10 P234NVA0600 h
6.10 0/-0.022 6.1 97 148 5 P234NVA0610 h
6.20 0/-0.022 6.2 97 148 5 P234NVA0620 h
6.30 0/-0.022 6.3 97 148 5 P234NVA0630 h
6.40 0/-0.022 6.4 97 148 5 P234NVA0640 f
6.50 0/-0.022 6.5 97 148 5 P234NVA0650 h
6.60 0/-0.022 6.6 97 148 5 P234NVA0660 h
6.70 0/-0.022 6.7 97 148 5 P234NVA0670 h
6.80 0/-0.022 6.8 102 156 5 P234NVA0680 h
6.90 0/-0.022 6.9 102 156 5 P234NVA0690 h
7.00 0/-0.022 7 102 156 5 P234NVA0700 h
7.10 0/-0.022 7.1 102 156 5 P234NVA0710 h
7.20 0/-0.022 7.2 102 156 5 P234NVA0720 h
7.30 0/-0.022 7.3 102 156 5 P234NVA0730 f
7.40 0/-0.022 7.4 102 156 5 P234NVA0740 h
7.50 0/-0.022 7.5 102 156 5 P234NVA0750 h
7.60 0/-0.022 7.6 109 165 5 P234NVA0760 h
7.70 0/-0.022 7.7 109 165 5 P234NVA0770 h
7.80 0/-0.022 7.8 109 165 5 P234NVA0780 h
7.90 0/-0.022 7.9 109 165 5 P234NVA0790 h
8.00 0/-0.022 8 109 165 5 P234NVA0800 h
8.10 0/-0.022 8.1 109 165 5 P234NVA0810 h
8.20 0/-0.022 8.2 109 165 5 P234NVA0820 h
HSS and HSS/Co drills
274
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
h stock standard f non-standard stock m stock exhaustion
D(h8) D Tol. d l L PACKAGING EDP No. Stock
8.30 0/-0.022 8.3 109 165 5 P234NVA0830 h
8.40 0/-0.022 8.4 109 165 5 P234NVA0840 h
8.50 0/-0.022 8.5 109 165 5 P234NVA0850 h
8.60 0/-0.022 8.6 115 175 5 P234NVA0860 h
8.70 0/-0.022 8.7 115 175 5 P234NVA0870 h
8.80 0/-0.022 8.8 115 175 5 P234NVA0880 h
8.90 0/-0.022 8.9 115 175 5 P234NVA0890 h
9.00 0/-0.022 9 115 175 5 P234NVA0900 h
9.10 0/-0.022 9.1 115 175 5 P234NVA0910 h
9.20 0/-0.022 9.2 115 175 5 P234NVA0920 h
9.30 0/-0.022 9.3 115 175 5 P234NVA0930 h
9.40 0/-0.022 9.4 115 175 5 P234NVA0940 h
9.50 0/-0.022 9.5 115 175 5 P234NVA0950 h
9.60 0/-0.022 9.6 121 184 5 P234NVA0960 h
9.70 0/-0.022 9.7 121 184 5 P234NVA0970 h
9.80 0/-0.022 9.8 121 184 5 P234NVA0980 h
9.90 0/-0.022 9.9 121 184 5 P234NVA0990 h
10.00 0/-0.022 10 121 184 5 P234NVA1000 h
10.20 0/-0.027 10.2 121 184 5 P234NVA1020 h
10.50 0/-0.027 10.5 121 184 5 P234NVA1050 h
10.80 0/-0.027 10.8 128 195 5 P234NVA1080 h
11.00 0/-0.027 11 128 195 5 P234NVA1100 h
11.20 0/-0.027 11.20 128 195 5 P234NVA1120 h
11.50 0/-0.027 11.5 128 195 5 P234NVA1150 h
11.80 0/-0.027 11.80 128 195 5 P234NVA1180 h
12.00 0/-0.027 12 134 205 5 P234NVA1200 h
234NVA
NVA type for tough materials, long
DIN
340
PMKNSH
++,,,
+ 1st choice , suitable
HSS and HSS/Co drills
275
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
CUTTING PARAMETERS
234NVA
Material Group
ISO 513 P1 P2 P3 P4 M1 M2 M3 M4 K1 K2
Hardness/Rm 500-700 N/mm² 600-1000 N/mm² < 750 N/mm² 550-850 N/mm² 150-350 HB
Vc (m/min) 20-30 15-25 12-16 8-12 20-30
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
0.5 15920 0.008 130 12740 0.007 90 8920 0.006 50 6370 0.004 25 15920 0.009 140
0.8 9950 0.015 150 7960 0.013 100 5570 0.011 58 3980 0.008 30 9950 0.017 160
17960 0.020 160 6370 0.017 110 4460 0.014 62 3180 0.010 32 7960 0.022 180
1.5 5310 0.030 160 4250 0.026 110 2970 0.021 62 2120 0.015 32 5310 0.033 180
23980 0.040 160 3180 0.034 110 2230 0.028 62 1590 0.020 32 3980 0.044 180
2.5 3180 0.050 160 2550 0.043 110 1780 0.035 62 1270 0.025 32 3180 0.055 170
32650 0.060 160 2120 0.051 110 1490 0.042 63 1060 0.030 32 2650 0.066 170
3.5 2270 0.070 160 1820 0.060 110 1270 0.049 62 910 0.035 32 2270 0.077 170
41990 0.080 160 1590 0.068 110 1110 0.056 62 800 0.040 32 1990 0.088 180
51590 0.090 140 1270 0.077 100 890 0.063 56 640 0.045 29 1590 0.099 160
61330 0.100 130 1060 0.085 90 740 0.070 52 530 0.050 27 1330 0.110 150
71140 0.110 130 910 0.094 90 640 0.077 49 450 0.055 25 1140 0.121 140
81000 0.120 120 800 0.102 80 560 0.084 47 400 0.060 24 1000 0.132 130
9880 0.130 110 710 0.111 80 500 0.091 46 350 0.065 23 880 0.143 130
10 800 0.140 110 640 0.119 80 450 0.098 44 320 0.070 22 800 0.154 120
11 720 0.150 110 580 0.128 70 410 0.105 43 290 0.075 22 720 0.165 120
12 660 0.160 110 530 0.136 70 370 0.112 41 270 0.080 22 660 0.176 120
Material Group
ISO 513 K3 K4 N1 N5 N2 N3 N4 S1 S2 S4
Hardness/Rm < 350 HB < 35 HRC
Vc (m/min) 20-30 40-60 30-50 8-12
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
0.5 15920 0.006 100 31850 0.011 360 25480 0.008 200 6370 0.003 20
0.8 9950 0.011 110 19900 0.021 420 15920 0.015 240 3980 0.006 24
17960 0.015 120 15920 0.028 450 12740 0.020 250 3180 0.008 25
1.5 5310 0.023 120 10620 0.042 450 8490 0.030 250 2120 0.012 25
23980 0.030 120 7960 0.056 450 6370 0.040 250 1590 0.016 25
2.5 3180 0.038 120 6370 0.070 450 5100 0.050 260 1270 0.020 25
32650 0.045 120 5310 0.084 450 4250 0.060 260 1060 0.024 25
3.5 2270 0.053 120 4550 0.098 450 3640 0.070 250 910 0.028 25
41990 0.060 120 3980 0.112 450 3180 0.080 250 800 0.032 26
51590 0.068 110 3180 0.126 400 2550 0.090 230 640 0.036 23
61330 0.075 100 2650 0.140 370 2120 0.100 210 530 0.040 21
71140 0.083 90 2270 0.154 350 1820 0.110 200 450 0.044 20
81000 0.090 90 1990 0.168 330 1590 0.120 190 400 0.048 19
9880 0.098 90 1770 0.182 320 1420 0.130 180 350 0.052 18
10 800 0.105 80 1590 0.196 310 1270 0.140 180 320 0.056 18
11 720 0.113 80 1450 0.210 300 1160 0.150 170 290 0.060 17
12 660 0.120 80 1330 0.224 300 1060 0.160 170 270 0.064 17
HSS and HSS/Co drills
276
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
h stock standard f non-standard stock m stock exhaustion
234LS-234LSTH
LS type for deep holes, long (234LS),
LS type for deep holes, PV15 coated, long (234LSTH)
DIN
340
234LS 234LSTH
234LS
234LSTH
PMKNSH
+,+
+ 1st choice , suitable
234LS 234LSTH
D(h8) D Tol. d l L PACKAGING EDP No. Stock EDP No. Stock
2.00 0/-0.014 2 56 85 10 P234LS0200 hP234LSTH0200 h
2.10 0/-0.014 2.1 56 85 10 P234LS0210 hP234LSTH0210 h
2.20 0/-0.014 2.2 59 90 10 P234LS0220 hP234LSTH0220 h
2.30 0/-0.014 2.3 59 90 10 P234LS0230 hP234LSTH0230 h
2.40 0/-0.014 2.4 62 95 10 P234LS0240 hP234LSTH0240 h
2.50 0/-0.014 2.5 62 95 10 P234LS0250 hP234LSTH0250 h
2.60 0/-0.014 2.6 62 95 10 P234LS0260 hP234LSTH0260 h
2.70 0/-0.014 2.7 66 100 10 P234LS0270 hP234LSTH0270 h
2.80 0/-0.014 2.8 66 100 10 P234LS0280 hP234LSTH0280 h
2.90 0/-0.014 2.9 66 100 10 P234LS0290 hP234LSTH0290 h
3.00 0/-0.014 3 66 100 10 P234LS0300 hP234LSTH0300 h
3.10 0/-0.018 3.1 69 106 10 P234LS0310 hP234LSTH0310 h
3.20 0/-0.018 3.2 69 106 10 P234LS0320 hP234LSTH0320 h
3.30 0/-0.018 3.3 69 106 10 P234LS0330 hP234LSTH0330 h
3.40 0/-0.018 3.4 73 112 10 P234LS0340 hP234LSTH0340 h
3.50 0/-0.018 3.5 73 112 10 P234LS0350 hP234LSTH0350 h
3.60 0/-0.018 3.6 73 112 10 P234LS0360 hP234LSTH0360 h
3.70 0/-0.018 3.7 73 112 10 P234LS0370 hP234LSTH0370 h
3.80 0/-0.018 3.8 78 119 10 P234LS0380 hP234LSTH0380 h
3.90 0/-0.018 3.9 78 119 10 P234LS0390 hP234LSTH0390 h
4.00 0/-0.018 4 78 119 10 P234LS0400 hP234LSTH0400 h
4.20 0/-0.018 4.2 78 119 10 P234LS0420 hP234LSTH0420 h
4.50 0/-0.018 4.5 82 126 10 P234LS0450 hP234LSTH0450 h
4.80 0/-0.018 4.8 87 132 10 P234LS0480 hP234LSTH0480 h
5.00 0/-0.018 5 87 132 10 P234LS0500 hP234LSTH0500 h
5.20 0/-0.018 5.2 87 132 10 P234LS0520 hP234LSTH0520 h
5.50 0/-0.018 5.5 91 139 10 P234LS0550 hP234LSTH0550 h
5.80 0/-0.018 5.8 91 139 10 P234LS0580 hP234LSTH0580 h
6.00 0/-0.018 6 91 139 10 P234LS0600 hP234LSTH0600 h
6.20 0/-0.022 6.2 97 148 5 P234LS0620 hP234LSTH0620 h
6.50 0/-0.022 6.5 97 148 5 P234LS0650 hP234LSTH0650 h
6.80 0/-0.022 6.8 102 156 5 P234LS0680 hP234LSTH0680 h
7.00 0/-0.022 7 102 156 5 P234LS0700 hP234LSTH0700 h
7.20 0/-0.022 7.2 102 156 5 P234LS0720 h
7.50 0/-0.022 7.5 102 156 5 P234LS0750 hP234LSTH0750 h
7.80 0/-0.022 7.8 109 165 5 P234LS0780 h
8.00 0/-0.022 8 109 165 5 P234LS0800 hP234LSTH0800 h
8.20 0/-0.022 8.2 109 165 5 P234LS0820 h
8.50 0/-0.022 8.5 109 165 5 P234LS0850 hP234LSTH0850 h
HSS and HSS/Co drills
277
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
h stock standard f non-standard stock m stock exhaustion
234LS-234LSTH
LS type for deep holes, long (234LS),
LS type for deep holes, PV15 coated, long (234LSTH)
DIN
340
234LS 234LSTH
234LS
234LSTH
PMKNSH
+,+
+ 1st choice , suitable
234LS 234LSTH
D(h8) D Tol. d l L PACKAGING EDP No. Stock EDP No. Stock
9.00 0/-0.022 9 115 175 5 P234LS0900 hP234LSTH0900 h
9.50 0/-0.022 9.5 115 175 5 P234LS0950 hP234LSTH0950 h
9.80 0/-0.022 9.8 121 184 5 P234LS0980 h
10.00 0/-0.022 10 121 184 5 P234LS1000 hP234LSTH1000 h
10.50 0/-0.027 10.5 121 184 5 P234LS1050 hP234LSTH1050 h
11.00 0/-0.027 11 128 195 5 P234LS1100 hP234LSTH1100 h
11.50 0/-0.027 11.5 128 195 5 P234LS1150 hP234LSTH1150 h
12.00 0/-0.027 12 134 205 5 P234LS1200 hP234LSTH1200 h
12.50 0/-0.027 12.5 134 205 5 P234LS1250 hP234LSTH1250 h
13.00 0/-0.027 13 134 205 5 P234LS1300 hP234LSTH1300 h
HSS and HSS/Co drills
278
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
CUTTING PARAMETERS
234LS
Material Group
ISO 513 P1 P2 P3 P4 M1 M2 K1 K2
Hardness/Rm 500-700 N/mm² 600-1000 N/mm² < 750 N/mm² 150-350 HB
Vc (m/min) 20-30 15-25 10-14 20-30
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
23980 0.040 160 3180 0.034 110 1910 0.028 53 3980 0.044 180
2.5 3180 0.050 160 2550 0.043 110 1530 0.035 54 3180 0.055 170
32650 0.060 160 2120 0.051 110 1270 0.042 53 2650 0.066 170
3.5 2270 0.070 160 1820 0.060 110 1090 0.049 53 2270 0.077 170
41990 0.080 160 1590 0.068 110 960 0.056 54 1990 0.088 180
51590 0.090 140 1270 0.077 100 760 0.063 48 1590 0.099 160
61330 0.100 130 1060 0.085 90 640 0.070 45 1330 0.110 150
71140 0.110 130 910 0.094 90 550 0.077 42 1140 0.121 140
81000 0.120 120 800 0.102 80 480 0.084 40 1000 0.132 130
9880 0.130 110 710 0.111 80 420 0.091 38 880 0.143 130
10 800 0.140 110 640 0.119 80 380 0.098 37 800 0.154 120
11 720 0.150 110 580 0.128 70 350 0.105 37 720 0.165 120
12 660 0.160 110 530 0.136 70 320 0.112 36 660 0.176 120
13 610 0.170 100 490 0.145 70 290 0.119 35 610 0.187 110
234LSTH
Material Group
ISO 513 P1 P2 P3 P4 M1 M2 K1 K2
Hardness/Rm 500-700 N/mm² 600-1000 N/mm² < 750 N/mm² 150-350 HB
Vc (m/min) 25-35 20-30 16-20 25-35
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
24780 0.040 190 3980 0.034 140 2870 0.028 80 4780 0.044 210
2.5 3820 0.050 190 3180 0.043 140 2290 0.035 80 3820 0.055 210
33180 0.060 190 2650 0.051 140 1910 0.042 80 3180 0.066 210
3.5 2730 0.070 190 2270 0.060 140 1640 0.049 80 2730 0.077 210
42390 0.080 190 1990 0.068 140 1430 0.056 80 2390 0.088 210
51910 0.090 170 1590 0.077 120 1150 0.063 72 1910 0.099 190
61590 0.100 160 1330 0.085 110 960 0.070 67 1590 0.110 170
71360 0.110 150 1140 0.094 110 820 0.077 63 1360 0.121 160
81190 0.120 140 1000 0.102 100 720 0.084 60 1190 0.132 160
91060 0.130 140 880 0.111 100 640 0.091 58 1060 0.143 150
10 960 0.140 130 800 0.119 100 570 0.098 56 960 0.154 150
11 870 0.150 130 720 0.128 90 520 0.105 55 870 0.165 140
12 800 0.160 130 660 0.136 90 480 0.112 54 800 0.176 140
13 730 0.170 120 610 0.145 90 440 0.119 52 730 0.187 140
HSS and HSS/Co drills
279
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
h stock standard f non-standard stock m stock exhaustion
2691LS-2691LSTH
LS type for deep holes, extra-long/1 (2691LS);
LS type for deep holes, PV15 coated, extra-long/1 (2691LSTH)
DIN
1869/1
2691LS 2691LSTH
2691LS
2691LSTH
PMKNSH
+,+
+ 1st choice , suitable
D(h8) D Tol. d l L PACKAGING EDP No. Stock EDP No. Stock
2.00 0/-0.014 2 85 125 10 P2691LS0200 hP2691LSTH0200 h
2.50 0/-0.014 2.5 95 140 10 P2691LS0250 hP2691LSTH0250 h
3.00 0/-0.014 3 100 150 10 P2691LS0300 hP2691LSTH0300 h
3.50 0/-0.018 3.5 115 165 10 P2691LS0350 hP2691LSTH0350 h
4.00 0/-0.018 4 120 175 10 P2691LS0400 hP2691LSTH0400 h
4.50 0/-0.018 4.5 125 185 10 P2691LS0450 hP2691LSTH0450 h
5.00 0/-0.018 5 135 195 10 P2691LS0500 hP2691LSTH0500 h
5.50 0/-0.018 5.5 140 205 10 P2691LS0550 hP2691LSTH0550 h
6.00 0/-0.018 6 140 205 10 P2691LS0600 hP2691LSTH0600 h
6.50 0/-0.022 6.5 150 215 5 P2691LS0650 hP2691LSTH0650 h
6.75 0/-0.022 6.75 155 225 5 P2691LS0675 h
7.00 0/-0.022 7 155 225 5 P2691LS0700 hP2691LSTH0700 h
7.50 0/-0.022 7.5 155 225 5 P2691LS0750 hP2691LSTH0750 h
8.00 0/-0.022 8 165 240 5 P2691LS0800 hP2691LSTH0800 h
8.50 0/-0.022 8.5 165 240 5 P2691LS0850 hP2691LSTH0850 h
9.00 0/-0.022 9 175 250 5 P2691LS0900 hP2691LSTH0900 h
9.50 0/-0.022 9.5 175 250 5 P2691LS0950 hP2691LSTH0950 h
10.00 0/-0.022 10 185 265 5 P2691LS1000 hP2691LSTH1000 h
10.50 0/-0.027 10.5 185 265 5 P2691LS1050 hP2691LSTH1050 h
11.00 0/-0.027 11 195 280 5 P2691LS1100 hP2691LSTH1100 h
11.50 0/-0.027 11.5 195 280 5 P2691LS1150 hP2691LSTH1150 h
12.00 0/-0.027 12 205 295 5 P2691LS1200 hP2691LSTH1200 h
12.50 0/-0.027 12.5 205 295 5 P2691LS1250 hP2691LSTH1250 h
13.00 0/-0.027 13 205 295 5 P2691LS1300 hP2691LSTH1300 h
2691LS 2691LSTH
HSS and HSS/Co drills
280
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
CUTTING PARAMETERS
2691LS
Material Group
ISO 513 P1 P2 P3 P4 M1 M2 K1 K2
Hardness/Rm 500-700 N/mm² 600-1000 N/mm² < 750 N/mm² 150-350 HB
Vc (m/min) 20-24 16-20 8-12 20-24
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
23500 0.032 110 2870 0.027 80 1590 0.022 36 3500 0.035 125
2.5 2800 0.040 110 2290 0.034 80 1270 0.028 36 2800 0.044 125
32340 0.048 110 1910 0.041 80 1060 0.034 36 2340 0.053 125
3.5 2000 0.056 110 1640 0.048 80 910 0.039 36 2000 0.062 125
41750 0.064 110 1430 0.054 80 800 0.045 36 1750 0.070 125
51400 0.072 100 1150 0.061 70 640 0.050 32 1400 0.079 110
61170 0.080 95 960 0.068 65 530 0.056 30 1170 0.088 105
71000 0.088 90 820 0.075 60 450 0.062 28 1000 0.097 95
8880 0.096 85 720 0.082 60 400 0.067 27 880 0.106 95
9780 0.104 80 640 0.088 55 350 0.073 25 780 0.114 90
10 700 0.112 80 570 0.095 55 320 0.078 25 700 0.123 85
11 640 0.120 75 520 0.102 55 290 0.084 24 640 0.132 85
12 580 0.128 75 480 0.109 50 270 0.090 24 580 0.141 80
13 540 0.136 75 440 0.116 50 240 0.095 23 540 0.150 80
2691LSTH
Material Group
ISO 513 P1 P2 P3 P4 M1 M2 K1 K2
Hardness/Rm 500-700 N/mm² 600-1000 N/mm² < 750 N/mm² 150-350 HB
Vc (m/min) 24-28 20-24 10-14 24-28
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
24140 0.032 132 3503 0.027 95 1911 0.022 43 4140 0.035 146
2.5 3312 0.040 132 2803 0.034 95 1529 0.028 43 3312 0.044 146
32760 0.048 132 2335 0.041 95 1274 0.034 43 2760 0.053 146
3.5 2366 0.056 132 2002 0.048 95 1092 0.039 43 2366 0.062 146
42070 0.064 132 1752 0.054 95 955 0.045 43 2070 0.070 146
51656 0.072 119 1401 0.061 86 764 0.050 39 1656 0.079 131
61380 0.080 110 1168 0.068 79 637 0.056 36 1380 0.088 121
71183 0.088 104 1001 0.075 75 546 0.062 34 1183 0.097 115
81035 0.096 99 876 0.082 71 478 0.067 32 1035 0.106 109
9920 0.104 96 778 0.088 69 425 0.073 31 920 0.114 105
10 828 0.112 93 701 0.095 67 382 0.078 30 828 0.123 102
11 753 0.120 90 637 0.102 65 347 0.084 29 753 0.132 99
12 690 0.128 88 584 0.109 64 318 0.090 29 690 0.141 97
13 637 0.136 87 539 0.116 62 294 0.095 28 637 0.150 95
HSS and HSS/Co drills
281
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
h stock standard f non-standard stock m stock exhaustion
D(h8) D Tol. d l L PACKAGING EDP No. Stock
3.00 0/-0.014 3 130 190 1 P1692LS0300 h
3.50 0/-0.018 3.5 145 210 1 P1692LS0350 h
4.00 0/-0.018 4 150 220 1 P1692LS0400 h
4.50 0/-0.018 4.5 160 235 1 P1692LS0450 h
5.00 0/-0.018 5 170 245 1 P1692LS0500 h
5.50 0/-0.018 5.5 180 260 1 P1692LS0550 h
6.00 0/-0.018 6 180 260 1 P1692LS0600 h
6.50 0/-0.022 6.5 190 275 1 P1692LS0650 h
7.00 0/-0.022 7 200 290 1 P1692LS0700 h
7.50 0/-0.022 7.5 200 290 1 P1692LS0750 h
8.00 0/-0.022 8 210 305 1 P1692LS0800 h
8.50 0/-0.022 8.5 210 305 1 P1692LS0850 h
9.00 0/-0.022 9 220 320 1 P1692LS0900 h
9.50 0/-0.022 9.5 220 320 1 P1692LS0950 h
10.00 0/-0.022 10 235 340 1 P1692LS1000 h
10.50 0/-0.027 10.5 235 340 1 P1692LS1050 h
11.00 0/-0.027 11 250 365 1 P1692LS1100 h
12.00 0/-0.027 12 260 375 1 P1692LS1200 h
1692LS
LS type for deep holes, extra-long/2
DIN
1869/2
PMKNSH
++
+ 1st choice , suitable
HSS and HSS/Co drills
282
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
CUTTING PARAMETERS
1692LS
Material Group
ISO 513 P1 P2 P3 P4 K1 K2
Hardness/Rm 500-700 N/mm² 600-1000 N/mm² 150-350 HB
Vc (m/min) 20-24 16-20 20-24
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
32340 0.040 95 1910 0.034 65 2340 0.044 105
3.5 2000 0.048 95 1640 0.041 65 2000 0.053 105
41750 0.056 100 1430 0.048 70 1750 0.062 110
51400 0.064 90 1150 0.054 65 1400 0.070 100
61170 0.072 85 960 0.061 60 1170 0.079 95
71000 0.080 80 820 0.068 55 1000 0.088 90
8880 0.088 75 720 0.075 55 880 0.097 85
9780 0.096 75 640 0.082 50 780 0.106 80
10 700 0.104 75 570 0.088 50 700 0.114 80
11 640 0.112 70 520 0.095 50 640 0.123 80
12 580 0.120 70 480 0.102 50 580 0.132 75
13 540 0.128 70 440 0.109 50 540 0.141 75
HSS and HSS/Co drills
283
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
h stock standard f non-standard stock m stock exhaustion
D(h8) D Tol. d l L PACKAGING EDP No. Stock
3.50 0/-0.018 3.5 180 265 1 P1693LS0350 h
4.00 0/-0.018 4 190 280 1 P1693LS0400 h
4.50 0/-0.018 4.5 200 295 1 P1693LS0450 h
5.00 0/-0.018 5 210 315 1 P1693LS0500 h
5.50 0/-0.018 5.5 225 330 1 P1693LS0550 h
6.00 0/-0.018 6 225 330 1 P1693LS0600 h
6.50 0/-0.022 6.5 235 350 1 P1693LS0650 h
7.00 0/-0.022 7 250 370 1 P1693LS0700 h
7.50 0/-0.022 7.5 250 370 1 P1693LS0750 h
8.00 0/-0.022 8 265 390 1 P1693LS0800 h
8.50 0/-0.022 8.5 265 390 1 P1693LS0850 h
9.00 0/-0.022 9 280 410 1 P1693LS0900 h
9.50 0/-0.022 9.5 280 410 1 P1693LS0950 h
10.00 0/-0.022 10 295 430 1 P1693LS1000 h
10.50 0/-0.027 10.5 295 430 1 P1693LS1050 h
11.00 0/-0.027 11 310 455 1 P1693LS1100 h
12.00 0/-0.027 12 330 480 1 P1693LS1200 h
1693LS
LS type for deep holes, extra-long/3
DIN
1869/3
PMKNSH
++
+ 1st choice , suitable
HSS and HSS/Co drills
284
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
CUTTING PARAMETERS
1693LS
Material Group
ISO 513 P1 P2 P3 P4 K1 K2
Hardness/Rm 500-700 N/mm² 600-1000 N/mm² 150-350 HB
Vc (m/min) 15-25 10-20 15-25
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
3.5 1820 0.045 80 1360 0.038 50 1820 0.050 90
41590 0.053 85 1190 0.045 55 1590 0.058 90
51270 0.060 75 960 0.051 50 1270 0.066 85
61060 0.068 70 800 0.057 45 1060 0.074 80
7910 0.075 70 680 0.064 45 910 0.083 75
8800 0.083 65 600 0.070 40 800 0.091 75
9710 0.090 65 530 0.077 40 710 0.099 70
10 640 0.098 60 480 0.083 40 640 0.107 70
11 580 0.105 60 430 0.089 40 580 0.116 65
12 530 0.113 60 400 0.096 40 530 0.124 65
13 490 0.120 60 370 0.102 40 490 0.132 65
HSS and HSS/Co drills
285
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
h stock standard f non-standard stock m stock exhaustion
145N-145NTI
N type for general purpose, MT shank, short (145N),
N type for general purpose, MT shank, TiN coated, short (145NTI)
DIN
345
145N 145NTI
145N
145NTI
PMKNSH
+,,
+ 1st choice , suitable
D(h8) D Tol. MT l L PACKAGING EDP No. Stock EDP No. Stock
5.00 0/-0.018 1 52 133 1 P145N0500 h
5.25 0/-0.018 1 52 133 1 P145N0525 f
5.50 0/-0.018 1 57 138 1 P145N0550 h
5.75 0/-0.018 1 57 138 1 P145N0575 f
6.00 0/-0.018 1 57 138 1 P145N0600 h
6.25 0/-0.022 1 63 144 1 P145N0625 f
6.50 0/-0.022 1 63 144 1 P145N0650 h
6.75 0/-0.022 1 69 150 1 P145N0675 h
7.00 0/-0.022 1 69 150 1 P145N0700 h
7.25 0/-0.022 1 69 150 1 P145N0725 f
7.50 0/-0.022 1 69 150 1 P145N0750 h
7.75 0/-0.022 1 75 156 1 P145N0775 f
8.00 0/-0.022 1 75 156 1 P145N0800 h
8.25 0/-0.022 1 75 156 1 P145N0825 f
8.50 0/-0.022 1 75 156 1 P145N0850 h
8.75 0/-0.022 1 81 162 1 P145N0875 f
9.00 0/-0.022 1 81 162 1 P145N0900 h
9.25 0/-0.022 1 81 162 1 P145N0925 f
9.50 0/-0.022 1 81 162 1 P145N0950 h
9.75 0/-0.022 1 87 168 1 P145N0975 f
10.00 0/-0.022 1 87 168 1 P145N1000 h
10.25 0/-0.027 1 87 168 1 P145N1025 h
10.50 0/-0.027 1 87 168 1 P145N1050 h
10.75 0/-0.027 1 94 175 1 P145N1075 f
11.00 0/-0.027 1 94 175 1 P145N1100 h
11.25 0/-0.027 1 94 175 1 P145N1125 f
11.50 0/-0.027 1 94 175 1 P145N1150 h
11.75 0/-0.027 1 94 175 1 P145N1175 f
12.00 0/-0.027 1 101 182 1 P145N1200 h
12.25 0/-0.027 1 101 182 1 P145N1225 f
12.50 0/-0.027 1 101 182 1 P145N1250 h
12.75 0/-0.027 1 101 182 1 P145N1275 f
13.00 0/-0.027 1 101 182 1 P145N1300 hP145NTI1300 h
13.25 0/-0.027 1 108 189 1 P145N1325 h
13.50 0/-0.027 1 108 189 1 P145N1350 hP145NTI1350 h
13.75 0/-0.027 1 108 189 1 P145N1375 h
14.00 0/-0.027 1 108 189 1 P145N1400 hP145NTI1400 h
14.25 0/-0.027 2 114 212 1 P145N1425 h
14.50 0/-0.027 2 114 212 1 P145N1450 hP145NTI1450 h
145N 145NTI
HSS and HSS/Co drills
286
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
h stock standard f non-standard stock m stock exhaustion
145N-145NTI
N type for general purpose, MT shank, short (145N),
N type for general purpose, MT shank, TiN coated, short (145NTI)
DIN
345
145N 145NTI
145N
145NTI
PMKNSH
+,,
+ 1st choice , suitable
D(h8) D Tol. MT l L PACKAGING EDP No. Stock EDP No. Stock
14.75 0/-0.027 2 114 212 1 P145N1475 h
15.00 0/-0.027 2 114 212 1 P145N1500 hP145NTI1500 h
15.25 0/-0.027 2 120 218 1 P145N1525 h
15.50 0/-0.027 2 120 218 1 P145N1550 hP145NTI1550 h
15.75 0/-0.027 2 120 218 1 P145N1575 h
16.00 0/-0.027 2 120 218 1 P145N1600 hP145NTI1600 h
16.25 0/-0.027 2 125 223 1 P145N1625 h
16.50 0/-0.027 2 125 223 1 P145N1650 hP145NTI1650 h
16.75 0/-0.027 2 125 223 1 P145N1675 h
17.00 0/-0.027 2 125 223 1 P145N1700 hP145NTI1700 h
17.25 0/-0.027 2 130 228 1 P145N1725 h
17.50 0/-0.027 2 130 228 1 P145N1750 hP145NTI1750 h
17.75 0/-0.027 2 130 228 1 P145N1775 h
18.00 0/-0.027 2 130 228 1 P145N1800 hP145NTI1800 h
18.25 0/-0.033 2 135 233 1 P145N1825 h
18.50 0/-0.033 2 135 233 1 P145N1850 hP145NTI1850 h
18.75 0/-0.033 2 135 233 1 P145N1875 h
19.00 0/-0.033 2 135 233 1 P145N1900 hP145NTI1900 h
19.25 0/-0.033 2 140 238 1 P145N1925 h
19.50 0/-0.033 2 140 238 1 P145N1950 hP145NTI1950 h
19.75 0/-0.033 2 140 238 1 P145N1975 h
20.00 0/-0.033 2 140 238 1 P145N2000 hP145NTI2000 h
20.25 0/-0.033 2 145 243 1 P145N2025 h
20.50 0/-0.033 2 145 243 1 P145N2050 hP145NTI2050 h
20.75 0/-0.033 2 145 243 1 P145N2075 h
21.00 0/-0.033 2 145 243 1 P145N2100 hP145NTI2100 h
21.25 0/-0.033 2 150 248 1 P145N2125 h
21.50 0/-0.033 2 150 248 1 P145N2150 hP145NTI2150 h
21.75 0/-0.033 2 150 248 1 P145N2175 h
22.00 0/-0.033 2 150 248 1 P145N2200 hP145NTI2200 h
22.25 0/-0.033 2 150 248 1 P145N2225 h
22.50 0/-0.033 2 155 253 1 P145N2250 hP145NTI2250 h
22.75 0/-0.033 2 155 253 1 P145N2275 h
23.00 0/-0.033 2 155 253 1 P145N2300 hP145NTI2300 h
23.25 0/-0.033 3 155 276 1 P145N2325 h
23.50 0/-0.033 3 155 276 1 P145N2350 hP145NTI2350 h
23.75 0/-0.033 3 160 281 1 P145N2375 h
24.00 0/-0.033 3 160 281 1 P145N2400 hP145NTI2400 h
24.25 0/-0.033 3 160 281 1 P145N2425 h
145N 145NTI
HSS and HSS/Co drills
287
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
h stock standard f non-standard stock m stock exhaustion
145N-145NTI
N type for general purpose, MT shank, short (145N),
N type for general purpose, MT shank, TiN coated, short (145NTI)
DIN
345
145N 145NTI
145N
145NTI
PMKNSH
+,,
+ 1st choice , suitable
D(h8) D Tol. MT l L PACKAGING EDP No. Stock EDP No. Stock
24.50 0/-0.033 3 160 281 1 P145N2450 hP145NTI2450 h
24.75 0/-0.033 3 160 281 1 P145N2475 h
25.00 0/-0.033 3 160 281 1 P145N2500 hP145NTI2500 h
25.25 0/-0.033 3 165 286 1 P145N2525 f
25.50 0/-0.033 3 165 286 1 P145N2550 h
25.75 0/-0.033 3 165 286 1 P145N2575 f
26.00 0/-0.033 3 165 286 1 P145N2600 hP145NTI2600 h
26.25 0/-0.033 3 165 286 1 P145N2625 f
26.50 0/-0.033 3 165 286 1 P145N2650 h
26.75 0/-0.033 3 170 291 1 P145N2675 f
27.00 0/-0.033 3 170 291 1 P145N2700 hP145NTI2700 h
27.25 0/-0.033 3 170 291 1 P145N2725 f
27.50 0/-0.033 3 170 291 1 P145N2750 h
27.75 0/-0.033 3 170 291 1 P145N2775 f
28.00 0/-0.033 3 170 291 1 P145N2800 hP145NTI2800 h
28.25 0/-0.033 3 175 296 1 P145N2825 f
28.50 0/-0.033 3 175 296 1 P145N2850 h
28.75 0/-0.033 3 175 296 1 P145N2875 f
29.00 0/-0.033 3 175 296 1 P145N2900 hP145NTI2900 h
29.25 0/-0.033 3 175 296 1 P145N2925 f
29.50 0/-0.033 3 175 296 1 P145N2950 h
29.75 0/-0.033 3 175 296 1 P145N2975 f
30.00 0/-0.033 3 175 296 1 P145N3000 hP145NTI3000 h
30.25 0/-0.039 3 180 301 1 P145N3025 f
30.50 0/-0.039 3 180 301 1 P145N3050 h
30.75 0/-0.039 3 180 301 1 P145N3075 f
31.00 0/-0.039 3 180 301 1 P145N3100 h
31.25 0/-0.039 3 180 301 1 P145N3125 f
31.50 0/-0.039 3 180 301 1 P145N3150 h
31.75 0/-0.039 3 185 306 1 P145N3175 f
32.00 0/-0.039 4 185 334 1 P145N3200 h
32.50 0/-0.039 4 185 334 1 P145N3250 h
33.00 0/-0.039 4 185 334 1 P145N3300 h
33.50 0/-0.039 4 185 334 1 P145N3350 h
34.00 0/-0.039 4 190 339 1 P145N3400 h
34.50 0/-0.039 4 190 339 1 P145N3450 h
35.00 0/-0.039 4 190 339 1 P145N3500 h
35.50 0/-0.039 4 190 339 1 P145N3550 h
36.00 0/-0.039 4 195 344 1 P145N3600 h
145N 145NTI
HSS and HSS/Co drills
288
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
h stock standard f non-standard stock m stock exhaustion
145N-145NTI
N type for general purpose, MT shank, short (145N),
N type for general purpose, MT shank, TiN coated, short (145NTI)
DIN
345
145N 145NTI
145N
145NTI
PMKNSH
+,,
+ 1st choice , suitable
D(h8) D Tol. MT l L PACKAGING EDP No. Stock EDP No. Stock
36.50 0/-0.039 4 195 344 1 P145N3650 h
37.00 0/-0.039 4 195 344 1 P145N3700 h
37.50 0/-0.039 4 195 344 1 P145N3750 h
38.00 0/-0.039 4 200 349 1 P145N3800 h
38.50 0/-0.039 4 200 349 1 P145N3850 h
39.00 0/-0.039 4 200 349 1 P145N3900 h
39.50 0/-0.039 4 200 349 1 P145N3950 h
40.00 0/-0.039 4 200 349 1 P145N4000 h
40.50 0/-0.039 4 205 354 1 P145N4050 h
41.00 0/-0.039 4 205 354 1 P145N4100 h
42.00 0/-0.039 4 205 354 1 P145N4200 h
43.00 0/-0.039 4 210 359 1 P145N4300 h
44.00 0/-0.039 4 210 359 1 P145N4400 h
45.00 0/-0.039 4 210 359 1 P145N4500 h
46.00 0/-0.039 4 215 364 1 P145N4600 h
47.00 0/-0.039 4 215 364 1 P145N4700 h
48.00 0/-0.039 4 220 369 1 P145N4800 h
49.00 0/-0.039 4 220 369 1 P145N4900 h
50.00 0/-0.039 4 220 369 1 P145N5000 h
55.00 0/-0.046 5 230 417 1 P145N5500 h
60.00 0/-0.046 5 235 422 1 P145N6000 h
145N 145NTI
HSS and HSS/Co drills
289
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
CUTTING PARAMETERS
145N
Material Group
ISO 513 P1 P2 P3 P4 K1 K2 N1 N5 N2 N3 N4
Hardness/Rm 500-700 N/mm² 600-1000 N/mm² 150-350 HB
Vc (m/min) 25-35 20-30 25-35 50-70 40-60
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
51910 0.100 190 1590 0.085 140 1910 0.110 210 3820 0.140 530 3180 0.100 320
61590 0.120 190 1330 0.102 140 1590 0.132 210 3180 0.168 530 2650 0.120 320
71360 0.140 190 1140 0.119 140 1360 0.154 210 2730 0.196 540 2270 0.140 320
81190 0.160 190 1000 0.136 140 1190 0.176 210 2390 0.224 540 1990 0.160 320
91060 0.180 190 880 0.153 130 1060 0.198 210 2120 0.252 530 1770 0.180 320
10 960 0.200 190 800 0.170 140 960 0.220 210 1910 0.280 530 1590 0.200 320
11 870 0.208 180 720 0.177 130 870 0.229 200 1740 0.291 510 1450 0.208 300
12 800 0.216 170 660 0.184 120 800 0.238 190 1590 0.302 480 1330 0.216 290
13 730 0.224 160 610 0.190 120 730 0.246 180 1470 0.314 460 1220 0.224 270
14 680 0.232 160 570 0.197 110 680 0.255 170 1360 0.325 440 1140 0.232 260
15 640 0.240 150 530 0.204 110 640 0.264 170 1270 0.336 430 1060 0.240 250
16 600 0.250 150 500 0.213 110 600 0.275 170 1190 0.350 420 1000 0.250 250
17 560 0.265 150 470 0.225 110 560 0.292 160 1120 0.371 420 940 0.265 250
18 530 0.280 150 440 0.238 100 530 0.308 160 1060 0.392 420 880 0.280 250
19 500 0.295 150 420 0.251 110 500 0.325 160 1010 0.413 420 840 0.295 250
20 480 0.315 150 400 0.268 110 480 0.347 170 960 0.441 420 800 0.315 250
22 430 0.330 140 360 0.281 100 430 0.363 160 870 0.462 400 720 0.330 240
25 380 0.350 130 320 0.298 100 380 0.385 150 760 0.490 370 640 0.350 220
27 350 0.370 130 290 0.315 90 350 0.407 140 710 0.518 370 590 0.370 220
30 320 0.400 130 270 0.340 90 320 0.440 140 640 0.560 360 530 0.400 210
35 270 0.450 120 230 0.383 90 270 0.495 130 550 0.630 350 450 0.450 200
40 240 0.500 120 200 0.425 90 240 0.550 130 480 0.700 340 400 0.500 200
45 210 0.560 120 180 0.476 90 210 0.616 130 420 0.784 330 350 0.560 200
50 190 0.630 120 160 0.536 90 190 0.693 130 380 0.882 340 320 0.630 200
55 170 0.700 120 140 0.595 80 170 0.770 130 350 0.980 340 290 0.700 200
60 160 0.800 130 130 0.680 90 160 0.880 140 320 1.120 360 270 0.800 220
145NTI
Material Group
ISO 513 P1 P2 P3 P4 K1 K2 N1 N5 N2 N3 N4
Hardness/Rm 500-700 N/mm² 600-1000 N/mm² 150-350 HB
Vc (m/min) 30-40 25-35 30-40 60-80 50-70
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
13 860 0.224 190 730 0.190 139 860 0.246 210 1710 0.314 540 1470 0.224 330
14 800 0.232 190 680 0.197 134 800 0.255 200 1590 0.325 520 1360 0.232 320
15 740 0.240 180 640 0.204 131 740 0.264 200 1490 0.336 500 1270 0.240 300
16 700 0.250 180 600 0.213 128 700 0.275 190 1390 0.350 490 1190 0.250 300
17 660 0.265 170 560 0.225 126 660 0.292 190 1310 0.371 490 1120 0.265 300
18 620 0.280 170 530 0.238 126 620 0.308 190 1240 0.392 490 1060 0.280 300
19 590 0.295 170 500 0.251 125 590 0.325 190 1170 0.413 480 1010 0.295 300
20 560 0.315 180 480 0.268 129 560 0.347 190 1110 0.441 490 960 0.315 300
22 510 0.330 170 430 0.281 121 510 0.363 190 1010 0.462 470 870 0.330 290
25 450 0.350 160 380 0.298 113 450 0.385 170 890 0.490 440 760 0.350 270
27 410 0.370 150 350 0.315 110 410 0.407 170 830 0.518 430 710 0.370 260
30 370 0.400 150 320 0.340 109 370 0.440 160 740 0.560 410 640 0.400 260
HSS and HSS/Co drills
290
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
h stock standard f non-standard stock m stock exhaustion
D(h8) D Tol. MT l L PACKAGING EDP No. Stock
13.00 0/-0.027 1 101 182 1 P245N1300 h
13.50 0/-0.027 1 108 189 1 P245N1350 h
14.00 0/-0.027 1 108 189 1 P245N1400 h
14.50 0/-0.027 2 114 212 1 P245N1450 h
15.00 0/-0.027 2 114 212 1 P245N1500 h
15.50 0/-0.027 2 120 218 1 P245N1550 h
16.00 0/-0.027 2 120 218 1 P245N1600 h
16.50 0/-0.027 2 125 223 1 P245N1650 h
17.00 0/-0.027 2 125 223 1 P245N1700 h
17.50 0/-0.027 2 130 228 1 P245N1750 h
18.00 0/-0.027 2 130 228 1 P245N1800 h
18.50 0/-0.033 2 135 233 1 P245N1850 h
19.00 0/-0.033 2 135 233 1 P245N1900 h
19.50 0/-0.033 2 140 238 1 P245N1950 h
20.00 0/-0.033 2 140 238 1 P245N2000 h
20.50 0/-0.033 2 145 243 1 P245N2050 h
21.00 0/-0.033 2 145 243 1 P245N2100 h
21.50 0/-0.033 2 150 248 1 P245N2150 h
22.00 0/-0.033 2 150 248 1 P245N2200 h
22.50 0/-0.033 2 155 253 1 P245N2250 h
23.00 0/-0.033 2 155 253 1 P245N2300 h
23.50 0/-0.033 3 155 276 1 P245N2350 h
24.00 0/-0.033 3 160 281 1 P245N2400 h
24.50 0/-0.033 3 160 281 1 P245N2450 h
25.00 0/-0.033 3 160 281 1 P245N2500 h
26.00 0/-0.033 3 165 286 1 P245N2600 h
27.00 0/-0.033 3 170 291 1 P245N2700 h
28.00 0/-0.033 3 170 291 1 P245N2800 h
29.00 0/-0.033 3 175 296 1 P245N2900 h
30.00 0/-0.033 3 175 296 1 P245N3000 h
245N
N type for tough materials, MT shank, short
DIN
345
PMKNSH
++,,,
+ 1st choice , suitable
HSS and HSS/Co drills
291
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
CUTTING PARAMETERS
245N
Material Group
ISO 513 P1 P2 P3 P4 M1 M2 M3 M4 K1 K2
Hardness/Rm 500-700 N/mm² 600-1000 N/mm² < 750 N/mm² 550-850 N/mm² 150-350 HB
Vc (m/min) 25-35 20-30 12-18 8-12 25-35
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
13 730 0.224 160 610 0.190 120 370 0.157 60 240 0.112 27 730 0.246 180
14 680 0.232 160 570 0.197 110 340 0.162 55 230 0.116 27 680 0.255 170
15 640 0.240 150 530 0.204 110 320 0.168 55 210 0.120 25 640 0.264 170
16 600 0.250 150 500 0.213 110 300 0.175 55 200 0.125 25 600 0.275 170
17 560 0.265 150 470 0.225 110 280 0.186 50 190 0.133 25 560 0.292 160
18 530 0.280 150 440 0.238 100 270 0.196 55 180 0.140 25 530 0.308 160
19 500 0.295 150 420 0.251 110 250 0.207 50 170 0.148 25 500 0.325 160
20 480 0.315 150 400 0.268 110 240 0.221 55 160 0.158 25 480 0.347 170
22 430 0.330 140 360 0.281 100 220 0.231 50 140 0.165 23 430 0.363 160
25 380 0.350 130 320 0.298 100 190 0.245 47 130 0.175 23 380 0.385 150
27 350 0.370 130 290 0.315 90 180 0.259 47 120 0.185 22 350 0.407 140
30 320 0.400 130 270 0.340 90 160 0.280 45 110 0.200 22 320 0.440 140
Material Group
ISO 513 K3 K4 N1 N5 N2 N3 N4 S1 S2 S4
Hardness/Rm < 350 HB < 35 HRC
Vc (m/min) 20-30 50-70 40-60 8-12
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
13 610 0.168 100 1470 0.314 460 1220 0.224 270 240 0.090 22
14 570 0.174 100 1360 0.325 440 1140 0.232 260 230 0.093 21
15 530 0.180 100 1270 0.336 430 1060 0.240 250 210 0.096 20
16 500 0.188 90 1190 0.350 420 1000 0.250 250 200 0.100 20
17 470 0.199 90 1120 0.371 420 940 0.265 250 190 0.106 20
18 440 0.210 90 1060 0.392 420 880 0.280 250 180 0.112 20
19 420 0.221 90 1010 0.413 420 840 0.295 250 170 0.118 20
20 400 0.236 90 960 0.441 420 800 0.315 250 160 0.126 20
22 360 0.248 90 870 0.462 400 720 0.330 240 140 0.132 18
25 320 0.263 80 760 0.490 370 640 0.350 220 130 0.140 18
27 290 0.278 80 710 0.518 370 590 0.370 220 120 0.148 18
30 270 0.300 80 640 0.560 360 530 0.400 210 110 0.160 18
HSS and HSS/Co drills
292
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
h stock standard f non-standard stock m stock exhaustion
D(h8) D Tol. MT l L PACKAGING EDP No. Stock
13.00 0/-0.027 1 134 215 1 P241LS1300 h
14.00 0/-0.027 1 142 223 1 P241LS1400 h
14.50 0/-0.027 2 147 245 1 P241LS1450 h
15.00 0/-0.027 2 147 245 1 P241LS1500 h
15.50 0/-0.027 2 153 251 1 P241LS1550 h
16.00 0/-0.027 2 153 251 1 P241LS1600 h
16.50 0/-0.027 2 159 257 1 P241LS1650 h
17.00 0/-0.027 2 159 257 1 P241LS1700 h
17.50 0/-0.027 2 165 263 1 P241LS1750 h
18.00 0/-0.027 2 165 263 1 P241LS1800 h
18.50 0/-0.033 2 171 269 1 P241LS1850 h
19.00 0/-0.033 2 171 269 1 P241LS1900 h
19.50 0/-0.033 2 177 275 1 P241LS1950 h
20.00 0/-0.033 2 177 275 1 P241LS2000 h
21.00 0/-0.033 2 184 282 1 P241LS2100 h
22.00 0/-0.033 2 191 289 1 P241LS2200 h
23.00 0/-0.033 2 198 296 1 P241LS2300 h
24.00 0/-0.033 3 206 327 1 P241LS2400 h
25.00 0/-0.033 3 206 327 1 P241LS2500 h
26.00 0/-0.033 3 214 335 1 P241LS2600 h
27.00 0/-0.033 3 222 343 1 P241LS2700 h
28.00 0/-0.033 3 222 343 1 P241LS2800 h
29.00 0/-0.033 3 230 351 1 P241LS2900 h
30.00 0/-0.033 3 230 351 1 P241LS3000 h
241LS
LS type for deep holes, MT shank, long
DIN
341
PMKNSH
+,+
+ 1st choice , suitable
HSS and HSS/Co drills
293
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
CUTTING PARAMETERS
241LS
Material Group
ISO 513 P1 P2 P3 P4 M1 M2 K1 K2
Hardness/Rm 500-700 N/mm² 600-1000 N/mm² < 750 N/mm² 150-350 HB
Vc (m/min) 15-25 10-20 10-14 20-30
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
13 490 0.160 80 370 0.136 50 290 0.112 32 610 0.176 110
14 450 0.170 75 340 0.145 49 270 0.119 32 570 0.187 110
15 420 0.180 75 320 0.153 49 250 0.126 32 530 0.198 100
16 400 0.200 80 300 0.170 51 240 0.140 34 500 0.220 110
17 370 0.190 70 280 0.162 45 220 0.133 29 470 0.209 100
18 350 0.205 70 270 0.174 47 210 0.144 30 440 0.226 100
19 340 0.220 75 250 0.187 47 200 0.154 31 420 0.242 100
20 320 0.235 75 240 0.200 48 190 0.165 31 400 0.259 100
21 300 0.250 75 230 0.213 49 180 0.175 32 380 0.275 100
22 290 0.265 75 220 0.225 50 170 0.186 32 360 0.292 100
23 280 0.280 80 210 0.238 50 170 0.196 33 350 0.308 110
24 270 0.295 80 200 0.251 50 160 0.207 33 330 0.325 110
25 250 0.310 80 190 0.264 50 150 0.217 33 320 0.341 110
26 240 0.325 80 180 0.276 50 150 0.228 34 310 0.358 110
27 240 0.340 80 180 0.289 52 140 0.238 33 290 0.374 110
28 230 0.355 80 170 0.302 51 140 0.249 35 280 0.391 110
29 220 0.370 80 160 0.315 50 130 0.259 34 270 0.407 110
30 210 0.385 80 160 0.327 52 130 0.270 35 270 0.424 110
HSS and HSS/Co drills
294
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
h stock standard f non-standard stock m stock exhaustion
D(h8) D Tol. MT l L PACKAGING EDP No. Stock
13.00 0/-0.027 1 205 310 1 P2701LS1300 h
13.50 0/-0.027 1 220 325 1 P2701LS1350 h
14.00 0/-0.027 1 220 325 1 P2701LS1400 h
14.50 0/-0.027 2 220 340 1 P2701LS1450 h
15.00 0/-0.027 2 220 340 1 P2701LS1500 h
15.50 0/-0.027 2 230 355 1 P2701LS1550 h
16.00 0/-0.027 2 230 355 1 P2701LS1600 h
16.50 0/-0.027 2 230 355 1 P2701LS1650 h
17.00 0/-0.027 2 230 355 1 P2701LS1700 h
17.50 0/-0.027 2 245 370 1 P2701LS1750 h
18.00 0/-0.027 2 245 370 1 P2701LS1800 h
18.50 0/-0.033 2 245 370 1 P2701LS1850 h
19.00 0/-0.033 2 245 370 1 P2701LS1900 h
19.50 0/-0.033 2 260 385 1 P2701LS1950 h
20.00 0/-0.033 2 260 385 1 P2701LS2000 h
21.00 0/-0.033 2 260 385 1 P2701LS2100 h
22.00 0/-0.033 2 270 405 1 P2701LS2200 h
23.00 0/-0.033 2 270 405 1 P2701LS2300 h
24.00 0/-0.033 3 290 440 1 P2701LS2400 h
25.00 0/-0.033 3 290 440 1 P2701LS2500 h
26.00 0/-0.033 3 290 440 1 P2701LS2600 h
27.00 0/-0.033 3 305 460 1 P2701LS2700 h
28.00 0/-0.033 3 305 460 1 P2701LS2800 h
29.00 0/-0.033 3 305 460 1 P2701LS2900 h
30.00 0/-0.033 3 305 460 1 P2701LS3000 h
2701LS
LS type for deep holes, MT shank, extra-long/1
DIN
1870/1
PMKNSH
+,+
+ 1st choice , suitable
HSS and HSS/Co drills
295
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
CUTTING PARAMETERS
2701LS
Material Group
ISO 513 P1 P2 P3 P4 M1 M2 K1 K2
Hardness/Rm 500-700 N/mm² 600-1000 N/mm² < 750 N/mm² 150-350 HB
Vc (m/min) 20-24 16-20 8-12 20-24
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
13 540 0.140 75 440 0.119 50 240 0.098 24 540 0.154 83
14 500 0.150 75 410 0.128 50 230 0.105 24 500 0.165 83
15 470 0.160 75 380 0.136 50 210 0.112 24 470 0.176 83
16 440 0.180 80 360 0.153 55 200 0.126 25 440 0.198 87
17 410 0.190 80 340 0.162 55 190 0.133 25 410 0.209 86
18 390 0.200 80 320 0.170 55 180 0.140 25 390 0.220 86
19 370 0.210 80 300 0.179 55 170 0.147 25 370 0.231 85
20 350 0.220 75 290 0.187 55 160 0.154 25 350 0.242 85
21 330 0.220 75 270 0.187 50 150 0.154 23 330 0.242 80
22 320 0.230 75 260 0.196 50 140 0.161 23 320 0.253 81
23 300 0.250 75 250 0.213 55 140 0.175 25 300 0.275 83
24 290 0.260 75 240 0.221 55 130 0.182 24 290 0.286 83
25 280 0.280 80 230 0.238 55 130 0.196 25 280 0.308 86
26 270 0.290 80 220 0.247 55 120 0.203 24 270 0.319 86
27 260 0.300 80 210 0.255 55 120 0.210 25 260 0.330 86
28 250 0.310 80 200 0.264 55 110 0.217 24 250 0.341 85
29 240 0.325 80 200 0.276 55 110 0.228 25 240 0.358 86
30 230 0.340 80 190 0.289 55 110 0.238 26 230 0.374 86
HSS and HSS/Co drills
296
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
h stock standard f non-standard stock m stock exhaustion
D(h8) D Tol. MT l L PACKAGING EDP No. Stock
13.00 0/-0.027 1 260 395 1 P2702LS1300 h
14.00 0/-0.027 1 275 410 1 P2702LS1400 h
14.50 0/-0.027 2 275 425 1 P2702LS1450 h
15.00 0/-0.027 2 275 425 1 P2702LS1500 h
15.50 0/-0.027 2 295 445 1 P2702LS1550 h
16.00 0/-0.027 2 295 445 1 P2702LS1600 h
16.50 0/-0.027 2 295 445 1 P2702LS1650 h
17.00 0/-0.027 2 295 445 1 P2702LS1700 h
17.50 0/-0.027 2 310 465 1 P2702LS1750 h
18.00 0/-0.027 2 310 465 1 P2702LS1800 h
18.50 0/-0.033 2 310 465 1 P2702LS1850 h
19.00 0/-0.033 2 310 465 1 P2702LS1900 h
19.50 0/-0.033 2 325 490 1 P2702LS1950 h
20.00 0/-0.033 2 325 490 1 P2702LS2000 h
21.00 0/-0.033 2 325 490 1 P2702LS2100 h
22.00 0/-0.033 2 345 515 1 P2702LS2200 h
23.00 0/-0.033 2 345 515 1 P2702LS2300 h
24.00 0/-0.033 3 365 555 1 P2702LS2400 h
25.00 0/-0.033 3 365 555 1 P2702LS2500 h
26.00 0/-0.033 3 365 555 1 P2702LS2600 h
27.00 0/-0.033 3 385 580 1 P2702LS2700 h
28.00 0/-0.033 3 385 580 1 P2702LS2800 h
29.00 0/-0.033 3 385 580 1 P2702LS2900 h
30.00 0/-0.033 3 385 580 1 P2702LS3000 h
2702LS
LS type for deep holes, MT shank, extra-long/2
DIN
1870/2
PMKNSH
+,+
+ 1st choice , suitable
HSS and HSS/Co drills
297
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
G2
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
CUTTING PARAMETERS
2702LS
Material Group
ISO 513 P1 P2 P3 P4 M1 M2 K1 K2
Hardness/Rm 500-700 N/mm² 600-1000 N/mm² < 750 N/mm² 150-350 HB
Vc (m/min) 15-25 10-20 10-14 20-30
D
(mm)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
n
(rpm)
fn
(mm/rev)
Vf
(mm/min)
13 490 0.130 65 370 0.111 40 290 0.091 26 610 0.143 85
14 450 0.140 65 340 0.119 40 270 0.098 26 570 0.154 90
15 420 0.150 65 320 0.128 40 250 0.105 26 530 0.165 85
16 400 0.160 65 300 0.136 40 240 0.112 27 500 0.176 90
17 370 0.170 65 280 0.145 40 220 0.119 26 470 0.187 90
18 350 0.180 65 270 0.153 40 210 0.126 26 440 0.198 85
19 340 0.190 65 250 0.162 40 200 0.133 27 420 0.209 90
20 320 0.200 65 240 0.170 40 190 0.140 27 400 0.220 90
21 300 0.210 65 230 0.179 40 180 0.147 26 380 0.231 90
22 290 0.220 65 220 0.187 40 170 0.154 26 360 0.242 85
23 280 0.230 65 210 0.196 40 170 0.161 27 350 0.253 90
24 270 0.240 65 200 0.204 40 160 0.168 27 330 0.264 85
25 250 0.250 65 190 0.213 40 150 0.175 26 320 0.275 90
26 240 0.270 65 180 0.230 40 150 0.189 28 310 0.297 90
27 240 0.280 65 180 0.238 45 140 0.196 27 290 0.308 90
28 230 0.290 65 170 0.247 40 140 0.203 28 280 0.319 90
29 220 0.300 65 160 0.255 40 130 0.210 27 270 0.330 90
30 210 0.310 65 160 0.264 40 130 0.217 28 270 0.341 90
CARBIDE END MILLS
CAPTION . 300
SELECTION GUIDE . 304
SYSTEM CHARTS . 314
G2 . 317
MDTA . 363
HF VH/UP . 387
MEF . 483
ALU . 497
MEX . 523
UH . 583
Caption
Legenda Verzeichnis Légende Leyenda Условные обозначения
300
STOCK
h
stock standard
stock standard
Standard Lager
stock standard
stock estándar
складская позиция
f
non-standard stock
stock non standard
nicht Standard Lager
stock non standard
stock no estándar
не складская позиция
m
stock exhaustion
esaurimento stock
Vorraterschöpfung
épuisement du stock
agotamiento de stock
складские остатки
APPLICATION GUIDELINES INDICAZIONI PER L'APPLICAZIONE LEITFADEN ZUR ANWENDUNG
INDICATIONS POUR L’APPLICATION INDICACIONES PARA SU APLICACIÓN УКАЗАНИЯ ПО ПРИМЕНЕНИЮ
0
1st choice
1a scelta
1. Wahl
1er choix
1ª elección
1-й выбор
,
suitable
adatto
geeignet
adapté
adecuado
пригоден
SHANK ATTACCO SCHAFT QUEUE MANGO ХВОСТОВИК
cylindrical shank
attacco cilindrico
zylindrischer Schaft
queue cylindrique
mango cilíndrico
цилиндрическое крепление
Weldon
MILLING STRATEGY STRATEGIA DI FRESATURA FRÄSSTRATEGIE
STRATÉGIES DE FRAISAGE ESTRATEGIA DE FRESADO СТРАТЕГИЯ ФРЕЗЕРОВАНИЯ
SLOTTING
slotting
fresatura di cave
Nutfräsen
rainurage
ranurado
фрезерование канавок
SIDE MILLING
side milling
contornatura
Konturfräsen
contournage
perfiladura
фрезерование по контуру
SQUARE RIB
square rib
nervatura piana
Flachrippen
rainurage
nervio plano
прямоугольное оребрение
COPYING
copying
copiatura
Kopieren
copiage
copia
копирование
ROUND RIB
round rib
nervatura raggiata
Rundrippen
rainurage rayonné
nervio radiado
радиальное оребрение
Caption
Legenda Verzeichnis Légende Leyenda Условные обозначения
301
MILLING STRATEGY STRATEGIA DI FRESATURA FRÄSSTRATEGIE
STRATÉGIES DE FRAISAGE ESTRATEGIA DE FRESADO СТРАТЕГИЯ ФРЕЗЕРОВАНИЯ
HELICAL
helical
interpolazione elicoidale
Helixinterpolation
interpolation hélicoïdale
interpolación helicoidal
винтовая интерполяция
RAMPING
ramping
entrata in rampa
Rampen
entrée en ramping
entrada en rampa
фрезерование под углом
VERTICAL
vertical
fresatura assiale
Vertikalfräsen
fraisage axial
fresado axial
осевое фрезерование
DRILLING
drilling
foratura
Bohren
perçage
taladro
сверление
TROCHOIDAL
trochoidal
fresatura trocoidale
trochoidales Fräsen
fraisage trochoïdal
fresado trocoidal
трохоидальное фрезерование
APPLICATION RANGE GAMMA DI APPLICAZIONE ANWENDUNGSBEREICH
GAMME D'APPLICATION RANGO DE APLICACIÓN ОБЛАСТЬ ПРИМЕНЕНИЯ
general purpose
uso generico
allgemeine Anwendung
applications génériques
uso genérico
общего назначения
< 40 HRC variable helix and unequal pitch
< 40 HRC elica variabile e passo differenziato
< 40 HRC ungleicher Teilung und Winkel
< 40 HRC hélice et pas différencié
< 40 HRC hélice variable y paso diferenciado
< 40 HRC переменный завиток и дифференциальная кромка
30÷55 HRC unequal pitch
30÷55 HRC passo differenziato
30÷55 HRC ungleicher Teilung
30÷55 HRC pas différencié
30÷55 HRC paso diferenciado
30÷55 HRC неодинаковый шаг режущих кромок
for stainless steel
per acciaio inossidabile
für rostfreien Stahl
pour acier inoxydable
para acero inoxidable
для нержавеющих сталей
for aluminium
per alluminio
für Aluminium
pour aluminium
para aluminio
для алюминия
unequal pitch (UP) for Aluminium
passo differenziato (UP) per alluminio
ungleiche Teilung (UP) für Aluminium
pas différencié (UP) pour aluminium
paso diferenciado (UP) para aluminio
неравномерный шаг (UP) для алюминия
30÷55 HRC general purpose and hardened steel
30÷55 HRC uso generico e acciaio temprato
30÷55 HRC allgemeine Anwendung und gehärtete Stähle
30÷55 HRC utilisation générale et aciers trempés
30÷55 HRC mecanizado genérico y acero templado
30÷55 HRC общее назначение и для закалённых сталей
< 70 HRC for hardened steel
< 70 HRC per acciai temprati
< 70 HRC für Hartstahl
< 70 HRC pour acier trempé
< 70 HRC para aceros templados
< 70 HRC для закалённых сталей
Caption
Legenda Verzeichnis Légende Leyenda Условные обозначения
302
TYPE TIPO TYP TYPE TIPO ТИП
sharp corner
spigolo vivo
scharfe Kante
arête vive
borde puntiagudo
острая кромка
45° chamfer
smusso a 45°
45° abgeschrägt
biseau à 45°
chaflán a 45°
фаска 45°
45° chamfer + radius
smusso a 45° + raggio
45° abgeschrägt + Radius
biseau à 45° + rayon
chaflán a 45° + radio
фаска 45° + радиус
corner radius
torica
Eckradius
torique
tórica
с радиусом при вершине
ball nose
raggiata
runder Stirn
bout hémisphérique
fresa de bola
сферическая
high feed
alto avanzamento
hoher Vorschub
haute vitesse
alto avance
высокая подача
NR. OF FLUTES N. DI TAGLIENTI ANZAHL DER SCHNEIDEN NOMBRE DE DENTS N. DE LABIOS КОЛИЧЕСТВО РЕЖУЩИХ КРОМОК
single flute
monotagliente
Einzelschneide
monocoupe
monofilo
1 зуб
2 flutes
2 taglienti
2 Schneiden
2 arêtes de coupe
2 filos
2 зуба
3 flutes
3 taglienti
3 Schneiden
3 arêtes de coupe
3 filos
3 зуба
3 flutes unequal pitch
3 taglienti passo differenziato
3 Schneiden ungleiche Teilung
3 arêtes de coupe pas différencié
3 filos paso diferenciado
3 зуба с неравномерным шагом
4 flutes
4 taglienti
4 Schneiden
4 arêtes de coupe
4 filos
4 зуба
4 flutes unequal pitch
4 taglienti passo differenziato
4 Schneiden ungleiche Teilung
4 arêtes de coupe pas différencié
4 filos paso diferenciado
4 зуба с неравномерным шагом
5 flutes
5 taglienti
5 Schneiden
5 arêtes de coupe
5 filos
5 зуба
6 flutes
6 taglienti
6 Schneiden
6 arêtes de coupe
6 filos
6 зуба
Caption
Legenda Verzeichnis Légende Leyenda Условные обозначения
303
CHIPBREAKER STYLE TIPO DI ROMPITRUCIOLO SPÄNEBRECHER TYP
TYPE DE BRISE-COPEAUX TIPO DE ROMPEVIRUTAS ТИП СТРУЖКОЛОМА
roughing coarse pitch
sgrossare passo grosso
Schruppfräser Regelgewinde
ébauche pas gros
desbaste paso grueso
черновая с крупным шагом
roughing fine pitch
sgrossare passo fine
Schruppfräser Feingewinde
ébauche pas fin
desbaste paso fino
черновая с мелким шагом
MATERIAL MATERIALE WERKSTOFF MATIÈRE MATERIAL МАТЕРИАЛ
nano micrograin
nano micrograna
nano Mikrokörnung
nano micrograin
nano micrograno
нано микрозернистый твёрдый сплав
ultra fine micrograin
micrograna ultra fine
ultrafeine Mikrokörnung
micrograin ultra-fin
micrograno ultra fino
ультра микрозернистый твёрдый сплав
micrograin
micrograna
Mikrokörnung
micrograin
micrograno
микрозернистый твёрдый сплав
SURFACE TREATMENT TRATTAMENTO SUPERFICIALE OBERFLÄCHENBEHANDLUNG
TRAITMENT DE SURFACE TRATAMIENTO SUPERFICIAL ОБРАБОТКА ПОВЕРХНОСТИ
...
BR
uncoated
non rivestito
unbeschichtet
non revêtu
no revestido
без покрытия
...
POLISHED
polished
lappato
geläppt
poli
pulido
полированный
COATINGS RIVESTIMENTI BESCHICHTUNGEN REVÊTEMENTS RECUBRIMIENTOS ПОКРЫТИЕ
hardness (HV)
durezza (HV)
Härte (HV)
dureté (HV)
dureza (HV)
твёрдость (HV)
3300 3300 3300 3300 3600
friction coefficient
coefficiente d’attrito
Reibungskoeffizient
coefficent de frottement
coeficiente de rozamiento
коэффициент трения
0.3 0.3 0.3 0.35 0.35
thickness (μ)
spessore (μ)
dicke (μ)
epaisseur (μ)
espesor (μ)
толщина (мкм)
3 2.5÷3.5 2.5÷3.5 2.5÷3.5 2.5÷3.5
max working temperature (°C)
temperatura max (°C)
hochste Temperatur (°C)
température maximale (°C)
temperatura máx (°C)
макс. температура (°C)
950° 1100° 900° 1000° 1200°
Selection Guide
Indice grafico Auswahlhilfe Indice graphique Índice gráfico Руководство по выбору
304
ITEM No. PAGE
G2 general purpose, square
GB205 318
G2CS2 320
G2WS2 322
G2210 324
G2211 324
G2212 324
GB305 327
G2CSH3 329
G2WSH3 331
G2310 333
G2311 333
G2312 333
GB405 335
G2CS4 337
G2WS4 339
G2410 341
G2411 341
G2412 341
G2413 341
G2CSHM 343
G2 general purpose, roughing
G2CSFR 345
G2WSFR 347
G2 general purpose, corner radius
G2CS2R 349
G2CS4R 351
G2CL4R 353
G2 general purpose, ball nose
GB255 355
G2CSB2 357
Selection Guide
Indice grafico Auswahlhilfe Indice graphique Índice gráfico Руководство по выбору
305
RANGE NORM TYPE MATERIAL /
COATING HRC HELIX
ANGLE
GEOMETRY
Z
ISO P ISO M ISO K ISO N ISO S ISO H
1-12 OSAWA N MG
BR <45 30° SQUARE 2 +,+,
1-20 OSAWA N MG
PV200 <45 30° SQUARE 2 +,+,
3-20 OSAWA N MG
PV200 <45 30° SQUARE 2 +,+,
2-6 OSAWA N MG
PV200 <45 30° SQUARE 2 +,+,
5-12 OSAWA N MG
PV200 <45 30° SQUARE 2 +,+,
8-16 OSAWA N MG
PV200 <45 30° SQUARE 2 +,+,
1-12 OSAWA N MG
BR <45 45° SQUARE 3 +,+,
1-20 OSAWA N MG
PV200 <45 45° SQUARE 3 +,+,
3-20 OSAWA N MG
PV200 <45 45° SQUARE 3 +,+,
2-6 OSAWA N MG
PV200 <45 45° SQUARE 3 +,+,
4-12 OSAWA N MG
PV200 <45 45° SQUARE 3 +,+,
8-20 OSAWA N MG
PV200 <45 45° SQUARE 3 +,+,
1-12 OSAWA N MG
BR <45 30° SQUARE 4 +,+,
1-25 OSAWA N MG
PV200 <45 30° SQUARE 4 +,+,
3-20 OSAWA N MG
PV200 <45 30° SQUARE 4 +,+,
2-6 OSAWA N MG
PV200 <45 30° SQUARE 4 +,+,
3-12 OSAWA N MG
PV200 <45 30° SQUARE 4 +,+,
8-20 OSAWA N MG
PV200 <45 30° SQUARE 4 +,+,
16-20 OSAWA N MG
PV200 <45 30° SQUARE 4 +,+,
6-20 OSAWA N MG
PV200 <45 45° SQUARE 6 +,+,
4-20 OSAWA N - HR MG
PV200 <45 30° SQUARE 3-4 +,+,
6-20 OSAWA N - HR MG
PV200 <45 30° SQUARE 3-4 +,+,
1-12 OSAWA N MG
PV200 <45 30° CORNER
RADIUS 2+,+,
1-12 OSAWA N MG
PV200 <45 30° CORNER
RADIUS 4+,+,
2-12 OSAWA N MG
PV200 <45 30° CORNER
RADIUS 4+,+,
1-12 OSAWA N MG
BR <45 30° BALL
NOSE 2+,+,
1-20 OSAWA N MG
PV200 <45 30° BALL
NOSE 2+,+,
+ 1st choice , suitable
Selection Guide
Indice grafico Auswahlhilfe Indice graphique Índice gráfico Руководство по выбору
306
ITEM No. PAGE
G2 general purpose, ball nose
G2250 359
G2251 359
G2CSB4 361
MDTA general purpose, square
MDTACS2 364
MDTA210 366
MDCL2 368
MDTACS3 370
MDTAWSH3 372
MDTACS4 374
MDTA410 376
MDCL4 378
MDTA general purpose, roughing MDTAUPR 380
MDTA general purpose, ball nose
MDTACSB2 382
MDTA250 384
HF UNI < 40 HRC, 45° chamfer
HF840 390
HF440 394
HF441 399
HF UNI < 40 HRC, roughing
HF844 405
HF444 409
HF445 413
HF UNI < 40 HRC, corner radius
HF342 418
HF842 421
HF442 425
HF443 430
HF542 435
HF942 438
HF943 442
Selection Guide
Indice grafico Auswahlhilfe Indice graphique Índice gráfico Руководство по выбору
307
RANGE NORM TYPE MATERIAL /
COATING HRC HELIX
ANGLE
GEOMETRY
Z
ISO P ISO M ISO K ISO N ISO S ISO H
1-12 OSAWA N MG
PV200 <45 30° BALL
NOSE 2+,+,
6-20 OSAWA N MG
PV200 <45 30° BALL
NOSE 2+,+,
1-20 OSAWA N MG
PV200 <45 30° BALL
NOSE 4+,+,
1-20 OSAWA N MG
PV200 <45 30° SQUARE 2 +,+,
3-12 OSAWA N MG
PV200 <45 30° SQUARE 2 +,+,
3-12 OSAWA N MG
BR <45 30° SQUARE 2 +,+,
1-20 OSAWA N MG
PV200 <45 30° SQUARE 3 +,+,
3-20 OSAWA N MG
PV200 <45 45° SQUARE 3 +,+,
1-20 OSAWA N MG
PV200 <45 30° SQUARE 4 +,+,
3-16 OSAWA N MG
PV200 <45 30° SQUARE 4 +,+,
3-20 OSAWA N MG
BR <45 30° SQUARE 4 +,+,
6-20 OSAWA N – UP – NR MG
PV200 <45 40° C45° 3-4 +,+
1-12 OSAWA N MG
PV200 <45 30° BALL
NOSE 2+,+,
3-12 OSAWA N MG
PV200 <45 30° BALL
NOSE 2+,+,
3-20 OSAWA VH/UP MG
PV300 <40 36°/39°
CHAMFER
45° 4+++ +
3-20 OSAWA VH/UP MG
PV300 <40 36°/39°
CHAMFER
45° 4+++ +
3-20 OSAWA VH/UP MG
PV300 <40 36°/39°
CHAMFER
45° 4+++ +
6-20 OSAWA VH/UP – HR MG
PV300 <40 36°/39°
CHAMFER
45° 4+++ +
6-20 OSAWA VH/UP – HR MG
PV300 <40 36°/39°
CHAMFER
45° 4+++ +
6-20 OSAWA VH/UP – HR MG
PV300 <40 36°/39°
CHAMFER
45° 4+++ +
3-12 OSAWA VH/UP MG
PV300 <40 36°/39° CORNER
RADIUS 4+++ +
4-20 OSAWA VH/UP MG
PV300 <40 36°/39° CORNER
RADIUS 4+++ +
3-20 OSAWA VH/UP MG
PV300 <40 36°/39° CORNER
RADIUS 4+++ +
3-20 OSAWA VH/UP MG
PV300 <40 36°/39° CORNER
RADIUS 4+++ +
6-20 OSAWA VH/UP MG
PV300 <40 36°/39° CORNER
RADIUS 4+++ +
4-20 OSAWA VH/UP MG
PV300 <40 36°/39° CORNER
RADIUS 4+++ +
4-20 OSAWA VH/UP MG
PV300 <40 36°/39° CORNER
RADIUS 4+++ +
+ 1st choice , suitable
Selection Guide
Indice grafico Auswahlhilfe Indice graphique Índice gráfico Руководство по выбору
308
ITEM No. PAGE
HF UNI < 40 HRC, corner radius
HF642 446
HF643 449
HF742 452
HF743 455
HF UNI SC < 40 HRC, 45° chamfer + corner radius HF861 458
HF HARD 30÷55 HRC, 45° chamfer
HF850 463
HF450 467
HF451 471
HF HARD 30÷55 HRC, corner radius
HF852 475
HF452 479
MEF stainless steel and super alloys, square
MEFCS2 484
MEFCSH3 486
MEFCS4 488
MEF600 490
MEF stainless steel and super alloys, roughing
MEF901 492
MEF902 494
ALU unequal pitch, square HFAL4 498
ALU unequal pitch, corner radius
HFAL3 501
HFA53 504
ALU square
MDCSA1 507
MDCSA2 509
MDCSA3 512
MDA310 514
MDA311 514
MDA312 514
MDCSAM 517
ALU corner radius MCA212R 519
Selection Guide
Indice grafico Auswahlhilfe Indice graphique Índice gráfico Руководство по выбору
309
RANGE NORM TYPE MATERIAL /
COATING HRC HELIX
ANGLE
GEOMETRY
Z
ISO P ISO M ISO K ISO N ISO S ISO H
4-20 OSAWA VH MG
PV300 <40
36
°
/37
°
/38
°CORNER
RADIUS 5+++ +
4-20 OSAWA VH MG
PV300 <40
36
°
/37
°
/38
°CORNER
RADIUS 5+++ +
6-20 OSAWA VH MG
PV300 <40
36
°
/37
°
/38
°CORNER
RADIUS 5+++ +
6-20 OSAWA VH MG
PV300 <40
36
°
/37
°
/38
°CORNER
RADIUS 5+++ +
1-20 OSAWA VH/UP MG
PV300 <40 36°/39° CR+C45° 4 +++ +
3-20 OSAWA UP MG
PV300 35÷55 40°
CHAMFER
45° 4+++ ++
3-20 OSAWA UP MG
PV300 35÷55 40°
CHAMFER
45° 4+++ ++
3-20 OSAWA UP MG
PV300 35÷55 40°
CHAMFER
45° 4+++ ++
4-20 OSAWA UP MG
PV300 35÷55 40° CORNER
RADIUS 4+++ ++
3-20 OSAWA UP MG
PV300 35÷55 40° CORNER
RADIUS 4+++ ++
1-16 OSAWA VA UMG
ENDLESS <45 35° SQUARE 2 ++ +
6-20 OSAWA VA UMG
ENDLESS <45 50° SQUARE 3 ++ +
2-20 OSAWA VA UMG
ENDLESS <45 35° SQUARE 4 ++ +
6-20 OSAWA VA UMG
ENDLESS <45 50° SQUARE 6-8 ++ +
4-20 OSAWA VA - HR UMG
ENDLESS <45 45° SQUARE 3-6 ++ +
6-20 OSAWA VA - HR UMG
ENDLESS <45 45° SQUARE 4-6 ++ +
3-20 OSAWA UP ALU MG
BR 40° SQUARE 4 +
2-20 OSAWA UP ALU MG
POLISHED 30° CORNER
RADIUS 3+
3-20 OSAWA UP ALU MG
BR 30° CORNER
RADIUS 3+
2-12 OSAWA ALU MG
POLISHED 25° SQUARE 1 +
1-20 OSAWA ALU MG
POLISHED 45° SQUARE 2 +
1-20 OSAWA ALU MG
POLISHED 55° SQUARE 3 +
3-6 OSAWA ALU MG
POLISHED 55° SQUARE 3 +
3-12 OSAWA ALU MG
POLISHED 55° SQUARE 3 +
8-20 OSAWA ALU MG
POLISHED 55° SQUARE 3 +
6-12 OSAWA ALU MG
POLISHED 50° SQUARE 6 +
2-12 OSAWA ALU MG
PV200 25° CORNER
RADIUS 2+
+ 1st choice , suitable
Selection Guide
Indice grafico Auswahlhilfe Indice graphique Índice gráfico Руководство по выбору
310
ITEM No. PAGE
ALU ball nose MDCAB2 521
MEX 30÷55 HRC, square
MEXM2 524
MEXM2SC 526
MEXLN2 528
MEXCS2 533
MEXCL2 535
MEX 30÷55 HRC, square
MEXCS4 537
MEXCL4 539
MEXCSHM 541
MEXCLHM 543
MEX 30÷55 HRC, roughing MEXCSFR 545
MEX 30÷55 HRC, corner radius
MEXLN2R 547
MEXLS2R 553
MEXCS4R 555
MEX410R 558
MEXLS4R 560
MEX610R 562
MEX611R 564
MEX 30÷55 HRC, ball nose
MEXMB2 566
MEXMB2SC 568
MEXLNB2 570
MEXLNB206 575
MEXCSB2 577
MEXCLSB2 579
MEX253 581
UH < 70 HRC, square
UHM204 584
UHLN2 586
Selection Guide
Indice grafico Auswahlhilfe Indice graphique Índice gráfico Руководство по выбору
311
RANGE NORM TYPE MATERIAL /
COATING HRC HELIX
ANGLE
GEOMETRY
Z
ISO P ISO M ISO K ISO N ISO S ISO H
1-12 OSAWA ALU MG
POLISHED 40° BALL
NOSE 2+
0.3-2 OSAWA MEX
UMG
ENDLESS ORANGE
<55 40° SQUARE 2 ++ +
0.2-0.9 OSAWA MEX
UMG
ENDLESS ORANGE
<55 40° SQUARE 2 ++ +
0.2-4 OSAWA MEX
UMG
ENDLESS ORANGE
<55 40° SQUARE 2 ++ +
1-20 OSAWA MEX
UMG
ENDLESS ORANGE
<55 30° SQUARE 2 ++ +
1-12 OSAWA MEX
UMG
ENDLESS ORANGE
<55 30° SQUARE 2 ++ +
1-25 OSAWA MEX
UMG
ENDLESS ORANGE
<55 30° SQUARE 4 ++ +
2-25 OSAWA MEX
UMG
ENDLESS ORANGE
<55 30°-40° SQUARE 4 ++ +
3-20 OSAWA MEX
UMG
ENDLESS ORANGE
<55 50° SQUARE 6-8 ++ +
3-20 OSAWA MEX
UMG
ENDLESS ORANGE
<55 45° SQUARE 6-8 ++ +
6-20 OSAWA MEX - HR
UMG
ENDLESS ORANGE
<55 20° SQUARE 3-4 ++ +
0.3-4 OSAWA MEX
UMG
ENDLESS ORANGE
<55 40° CORNER
RADIUS 2++ +
2-16 OSAWA MEX
UMG
ENDLESS ORANGE
<55 40° CORNER
RADIUS 2++ +
1-20 OSAWA MEX
UMG
ENDLESS ORANGE
<55 40° CORNER
RADIUS 4++ +
2-12 OSAWA MEX
UMG
ENDLESS ORANGE
<55 30° CORNER
RADIUS 4++ +
2-16 OSAWA MEX
UMG
ENDLESS ORANGE
<55 40° CORNER
RADIUS 4++ +
6-12 OSAWA MEX
UMG
ENDLESS ORANGE
<55 45° CORNER
RADIUS 6++ +
6-12 OSAWA MEX
UMG
ENDLESS ORANGE
<55 45° CORNER
RADIUS 6++ +
0.2-2 OSAWA MEX
UMG
ENDLESS ORANGE
<55 30° BALL
NOSE 2++ +
0.2-0.8 OSAWA MEX
UMG
ENDLESS ORANGE
<55 30° BALL
NOSE 2++ +
0.2-4 OSAWA MEX
UMG
ENDLESS ORANGE
<55 30° BALL
NOSE 2++ +
0.5-2 OSAWA MEX
UMG
ENDLESS ORANGE
<55 30° BALL
NOSE 2++ +
1-20 OSAWA MEX
UMG
ENDLESS ORANGE
<55 30° BALL
NOSE 2++ +
1-20 OSAWA MEX
UMG
ENDLESS ORANGE
<55 30° BALL
NOSE 2++ +
1-20 OSAWA MEX
UMG
ENDLESS ORANGE
<55 30° BALL
NOSE 2++ +
0.1-0.9 OSAWA UH NMG
UH RED <70 40° SQUARE 2 ,, +
0.2-4 OSAWA UH NMG
UH RED <70 40° SQUARE 2 ,, +
+ 1st choice , suitable
Selection Guide
Indice grafico Auswahlhilfe Indice graphique Índice gráfico Руководство по выбору
312
ITEM No. PAGE
UH < 70 HRC, square
UH600 591
UH612 593
UH < 70 HRC, corner radius
UHM206 595
UH211 597
UH212 599
UHCS2 604
UHF4LN 606
UHF4 610
UHCS4 612
UH410 614
UH411 617
UH412 619
UH413 621
UH610R 623
UH611R 625
UH < 70 HRC, ball nose
UHMB204 627
UHMB206 629
UHLNB2 631
UHCRB2 636
UHCSB2 638
UH250 640
UH253 642
Selection Guide
Indice grafico Auswahlhilfe Indice graphique Índice gráfico Руководство по выбору
313
RANGE NORM TYPE MATERIAL /
COATING HRC HELIX
ANGLE
GEOMETRY
Z
ISO P ISO M ISO K ISO N ISO S ISO H
3-20 OSAWA UH NMG
UH RED <70 50° SQUARE 6-8 ,, +
3-20 OSAWA UH NMG
UH RED <70 50° SQUARE 6-8 ,, +
0.3-2 OSAWA UH NMG
UH RED <70 40° CORNER
RADIUS 2,, +
1-6 OSAWA UH NMG
UH RED <70 30° CORNER
RADIUS 2,, +
0.2-4 OSAWA UH NMG
UH RED <70 40° CORNER
RADIUS 2,, +
1-12 OSAWA UH NMG
UH RED <70 30° CORNER
RADIUS 2,, +
1-4 OSAWA UP – UH NMG
UH RED <70 25° CORNER
RADIUS 4,, +
2-12 OSAWA UH NMG
UH RED <70 25° CORNER
RADIUS 4,, +
1-12 OSAWA UH NMG
UH RED <70 30° CORNER
RADIUS 4,, +
1-20 OSAWA UH NMG
UH RED <70 40° CORNER
RADIUS 4,, +
3-12 OSAWA UH NMG
UH RED <70 30° CORNER
RADIUS 4,, +
2-12 OSAWA UH NMG
UH RED <70 40° CORNER
RADIUS 4,, +
6-16 OSAWA UH NMG
UH RED <70 40° CORNER
RADIUS 4,, +
6-12 OSAWA UH NMG
UH RED <70 45° CORNER
RADIUS 6,, +
6-20 OSAWA UH NMG
UH RED <70 45° CORNER
RADIUS 6,, +
0.2-0.8 OSAWA UH NMG
UH RED <70 30° BALL
NOSE 2,, +
0.4-0.8 OSAWA UH NMG
UH RED <70 30° BALL
NOSE 2,, +
0.2-4 OSAWA UH NMG
UH RED <70 30° BALL
NOSE 2,, +
0.5-2 OSAWA UH NMG
UH RED <70 30° BALL
NOSE 2,, +
1-20 OSAWA UH NMG
UH RED <70 30° BALL
NOSE 2,, +
1-20 OSAWA UH NMG
UH RED <70 30° BALL
NOSE 2,, +
1-20 OSAWA UH NMG
UH RED <70 30° BALL
NOSE 2,, +
+ 1st choice , suitable
System charts
Grafici applicativi Anwendungsgrafiken Graphiques d’application Gráficos aplicativos Диаграммы
314
ISO M
Vc [m/min]
40 80 120 160
high
medium
high
medium
low
low
Machinability
medium
ISO P
Vc [m/min]
50 100 150 200
20
30
40
50
60
HRC Hardness
HF Uni+
HF
Hard+
MEX+
UH,
G2+
MDTA+
MEF+
G2,
MDTA,HF Uni+
MEF+
HF
Hard+
STEEL APPLICATION
STAINLESS STEEL APPLICATION
G2 : general purpose (page 317)
MDTA : general purpose (page 363)
HF UNI : universal purpose (page 387)
HF HARD : special purpose (page 463)
MEF : special purpose (page 483)
MEX : special purpose (page 523)
UH :special purpose (page 583)
+ 1st choice , suitable
+ 1st choice , suitable
System charts
Grafici applicativi Anwendungsgrafiken Graphiques d’application Gráficos aplicativos Диаграммы
315
ISO K
ISO N
Vc [m/min]
50 100 150 200
100
200
300
400
HB hardness
Vc [m/min]
100 200 300 400
8
12
Si %
G2,
MDTA,
ALU+
HF Alu+
16
20
24
G2+
MDTA+
MEX+
HF Uni+
UH,
HF
Hard+
CAST IRON APPLICATION
NON-FERROUS MATERIALS APPLICATION
G2 : general purpose (page 317)
MDTA : general purpose (page 363)
HF UNI : universal purpose (page 387)
HF HARD : special purpose (page 463)
ALU : special purpose (page 497)
MEX : special purpose (page 523)
UH :special purpose (page 583)
+ 1st choice , suitable
+ 1st choice , suitable
System charts
Grafici applicativi Anwendungsgrafiken Graphiques d’application Gráficos aplicativos Диаграммы
316
ISO S
ISO H
Vc [m/min]
25 50 75 100
10
20
30
50
HRC hardness
Vc [m/min]
50 100 150 200
30
40
HRC hardness
50
60
70
40
HF
Hard+
MEF
MEF+
HF Uni+
MEX+
HF
Hard+
UH+
SUPER ALLOYS APPLICATION
HARDENED STEEL APPLICATION
HF UNI : universal purpose (page 387)
HF HARD : special purpose (page 463)
MEF : special purpose (page 483)
MEX : special purpose (page 523)
UH :special purpose (page 583)
+ 1st choice , suitable
+ 1st choice , suitable
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
G2
GENERAL PURPOSE
Range of general-purpose endmills, featuring new cutting
geometries and innovative coatings for enhanced performance.
The answer given by Osawa to the market demand for higher
performance tools. Thanks to a fully optimized manufacturing
process and to large production batches the G2 range excels
in the cost-performance ratio.
Gamma di frese per uso generico, dotate di geometria di
taglio e rivestimenti innovativi per garantire prestazioni ancora
più elevate. La risposta di Osawa ad un mercato che chiede
utensili sempre più performanti e competitivi. L'innovazione nei
processi produttivi consente alla gamma G2 di eccellere nel
rapporto qualità-prezzo.
Produktpalette von Fräser für allgemeine Anwendungen,
ausgestattet mit einer Schnittgeometrie und innovativen
Beschichtungen zur Gewährleistung noch höherer Leistungen.
Die Antwort von Osawa auf einen Markt, der immer
leistungsstärkere und wettbewerbsfähigere Werkzeuge
fordert. Dank der Innovation der Produktionsprozesse zeichnet
sich die Produktreihe G2 durch ein außergewöhnliches Preis-
Leistungsverhältnis aus.
Gamme de fraises pour un usage général, dotées de
géométrie de coupe et de revêtements innovants pour garantir
des prestations encore plus élevées. C'est la réponse d’Osawa à
un marché qui nécessite d'outils de plus en plus performants et
compétitifs. L’innovation des processus de production permet
à la gamme G2 d’avoir un rapport qualité-prix excellent.
Gama de fresas para uso genérico, provistas de geometría
de corte y revestimientos innovadores para garantizar
prestaciones aún más elevadas. La respuesta de Osawa a
un mercado que pide herramientas cada vez con mayor
rendimiento y más competitivas. La innovación en los procesos
de producción permite a la gama G2 sobresalir en la relación
calidad-precio.
Ассортимент фрез общего назначения, с новой
геометрией и покрытиями, гарантирующими
высокоэффективную работу. Это ответ компании
Osawa на запросы рынка, который требует всё более
конкурентоспособные инструменты с высокими
эксплуатационными характеристиками. Инновации в
производственных процессах и большие изготавливаемые
партии позволяют серии G2 иметь превосходное
соотношение цена-качество.
G2 - General purpose - Square
318
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
h stock standard f non-standard stock m stock exhaustion
D D Tol. C C Tol. d(h6) l l1 L z EDP No. Stock
10/-0.020 4 3 50 2 GB205010 h
1.5 0/-0.020 4 4.5 50 2 GB205015 h
20/-0.020 4 6 50 2 GB205020 h
30/-0.020 4 8 50 2 GB205030 h
40/-0.020 4 11 50 2 GB205040 h
50/-0.020 6 13 50 2 GB205050 h
60/-0.020 6 15 50 2 GB205060 h
80/-0.025 8 20 60 2 GB205080 h
10 0/-0.025 10 30 75 2 GB205100 h
12 0/-0.025 12 30 75 2 GB205120 h
GB205
cylindrical shank, 2 flutes
OSAWA
NORM
<45
HRC
PMKNSH
+,+,
+ 1st choice , suitable
SLOTTING
SIDE MILLING
DRILLING
G2 - General purpose - Square
319
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
CUTTING PARAMETERS
GB205
SLOTTING
Material Group
ISO 513 P1 K1 P2 M1 K2 P3 M2 N1 N2 N3 N4
Hardness/Rm < 700 N/mm² 700-1000 N/mm² < 40 HRC
ap x ae 0.5D x D 0.5D x D 0.3D x D 0.5D x D
Vc (m/min) 50-60 30-50 20-40 70-90
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
117520 0.004 120 12740 0.003 80 9550 0.003 50 25480 0.005 230
28760 0.007 120 6370 0.006 80 4780 0.005 50 12740 0.009 230
35840 0.010 120 4250 0.009 70 3180 0.008 50 8490 0.013 220
44380 0.014 120 3180 0.012 80 2390 0.011 50 6370 0.018 230
53500 0.018 130 2550 0.015 80 1910 0.014 50 5100 0.023 240
62920 0.023 130 2120 0.020 80 1590 0.017 50 4250 0.030 250
82190 0.030 130 1590 0.026 80 1190 0.023 50 3180 0.039 250
10 1750 0.038 130 1270 0.032 80 960 0.029 50 2550 0.049 250
12 1460 0.045 130 1060 0.038 80 800 0.034 50 2120 0.059 250
< D3 mm: ap = 0.2D
SIDE MILLING
Material Group
ISO 513 P1 K1 P2 M1 K2 P3 M2 N1 N2 N3 N4
Hardness/Rm < 700 N/mm² 700-1000 N/mm² < 40 HRC
ap x ae 1.5D x 0.3D 1.5D x 0.3D 1.5D x 0.2D 1.5D x 0.3D
Vc (m/min) 50-60 30-50 20-40 70-90
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
117520 0.004 150 12740 0.004 90 9550 0.003 60 25480 0.006 290
28760 0.009 150 6370 0.007 90 4780 0.007 60 12740 0.011 290
35840 0.013 150 4250 0.011 90 3180 0.009 60 8490 0.016 280
44380 0.018 150 3180 0.015 90 2390 0.013 60 6370 0.023 290
53500 0.023 160 2550 0.019 100 1910 0.017 60 5100 0.029 300
62920 0.029 170 2120 0.024 100 1590 0.022 70 4250 0.037 320
82190 0.038 160 1590 0.032 100 1190 0.028 70 3180 0.049 310
10 1750 0.048 170 1270 0.040 100 960 0.036 70 2550 0.062 310
12 1460 0.056 160 1060 0.048 100 800 0.042 70 2120 0.073 310
< D3 mm: ae = 0.2D
DRILLING
Material Group
ISO 513 P1 K1 P2 M1 K2 P3 M2 N1 N2 N3 N4
Hardness/Rm < 700 N/mm² 700-1000 N/mm² < 40 HRC
ap x ae D X D D X D 0.5D X D D X D
Vc (m/min) 40-50 30-40 20-30 60-80
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
114330 0.002 60 11150 0.002 40 7960 0.002 30 22290 0.003 130
27170 0.004 60 5570 0.004 40 3980 0.003 30 11150 0.006 130
34780 0.006 60 3720 0.005 40 2650 0.005 20 7430 0.008 120
43580 0.009 60 2790 0.007 40 1990 0.007 30 5570 0.011 130
52870 0.011 60 2230 0.010 40 1590 0.008 30 4460 0.015 130
62390 0.014 70 1860 0.012 50 1330 0.011 30 3720 0.019 140
81790 0.019 70 1390 0.016 40 1000 0.014 30 2790 0.024 140
10 1430 0.024 70 1110 0.020 40 800 0.018 30 2230 0.031 140
12 1190 0.028 70 930 0.024 40 660 0.021 30 1860 0.037 140
< D3 mm: ap = 0.5D
G2 - General purpose - Square
320
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
h stock standard f non-standard stock m stock exhaustion
D D Tol. C C Tol. d(h6) l l1 L z EDP No. Stock
10/-0.020 4 3 50 2 G2CS2010 h
1.5 0/-0.020 4 4.5 50 2 G2CS2015 h
20/-0.020 4 6 50 2 G2CS2020 h
2.5 0/-0.020 4 7 50 2 G2CS2025 h
30/-0.020 4 8 50 2 G2CS2030 h
3.5 0/-0.020 4 10 50 2 G2CS2035 h
40/-0.020 4 11 50 2 G2CS2040 h
4.5 0/-0.020 6 13 50 2 G2CS2045 h
50/-0.020 6 13 50 2 G2CS2050 h
5.5 0/-0.020 6 13 50 2 G2CS2055 h
60/-0.020 6 15 50 2 G2CS2060 h
6.5 0/-0.025 8 17 60 2 G2CS2065 h
70/-0.025 8 17 60 2 G2CS2070 h
7.5 0/-0.025 8 17 60 2 G2CS2075 h
80/-0.025 8 20 60 2 G2CS2080 h
8.5 0/-0.025 10 23 75 2 G2CS2085 h
90/-0.025 10 23 75 2 G2CS2090 h
10 0/-0.025 10 30 75 2 G2CS2100 h
10.5 0/-0.025 12 25 75 2 G2CS2105 h
11 0/-0.025 12 28 75 2 G2CS2110 h
12 0/-0.025 12 30 75 2 G2CS2120 h
13 0/-0.030 16 33 100 2 G2CS2130 h
14 0/-0.030 14 26 83 2 G2CS2140 h
15 0/-0.030 16 40 100 2 G2CS2150 h
16 0/-0.030 16 32 92 2 G2CS2160 h
17 0/-0.030 20 40 100 2 G2CS2170 h
18 0/-0.030 20 40 100 2 G2CS2180 h
20 0/-0.030 20 40 100 2 G2CS2200 h
G2CS2
cylindrical shank, 2 flutes
OSAWA
NORM
<45
HRC
PMKNSH
+,+,
+ 1st choice , suitable
SLOTTING
SIDE MILLING
DRILLING
G2 - General purpose - Square
321
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
CUTTING PARAMETERS
G2CS2
SLOTTING
Material Group
ISO 513 P1 P2 K1 P3 P4 M1 M2 K2 P5 M3 K3 N1 N2 N3 N4
Hardness/Rm < 700 N/mm² 700-1000 N/mm² < 40 HRC
ap x ae 0.5D x D 0.5D x D 0.5D x D 0.5D x D
Vc (m/min) 80-100 50-70 30-50 100-120
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
128660 0.004 230 19110 0.003 130 12740 0.003 80 35030 0.005 360
214330 0.008 230 9550 0.007 130 6370 0.006 80 17520 0.010 360
39550 0.012 230 6370 0.010 130 4250 0.009 80 11680 0.016 360
47170 0.016 230 4780 0.014 130 3180 0.012 80 8760 0.021 360
55730 0.020 230 3820 0.017 130 2550 0.015 80 7010 0.026 360
64780 0.025 240 3180 0.021 140 2120 0.019 80 5840 0.033 380
83580 0.032 230 2390 0.027 130 1590 0.024 80 4380 0.042 360
10 2870 0.038 220 1910 0.032 120 1270 0.029 70 3500 0.049 350
12 2390 0.045 220 1590 0.038 120 1060 0.034 70 2920 0.059 340
14 2050 0.052 210 1360 0.044 120 910 0.039 70 2500 0.068 340
16 1790 0.060 210 1190 0.051 120 800 0.045 70 2190 0.078 340
18 1590 0.070 220 1060 0.060 130 710 0.053 70 1950 0.091 350
20 1430 0.080 230 960 0.068 130 640 0.060 80 1750 0.104 360
< D3 mm: ap = 0.2D
SIDE MILLING
Material Group
ISO 513 P1 P2 K1 P3 P4 M1 M2 K2 P5 M3 K3 N1 N2 N3 N4
Hardness/Rm < 700 N/mm² 700-1000 N/mm² < 40 HRC
ap x ae 1.5D x 0.5D 1.5D x 0.5D 1.5D x 0.5D 1.5D x 0.5D
Vc (m/min) 80-100 50-70 30-50 100-120
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
128660 0.005 280 19110 0.004 160 12740 0.004 90 35030 0.006 440
214330 0.010 280 9550 0.008 160 6370 0.007 90 17520 0.012 440
39550 0.014 280 6370 0.012 160 4250 0.011 90 11680 0.019 440
47170 0.019 280 4780 0.016 160 3180 0.014 90 8760 0.025 440
55730 0.024 280 3820 0.020 160 2550 0.018 90 7010 0.031 440
64780 0.030 290 3180 0.026 160 2120 0.023 100 5840 0.039 460
83580 0.038 270 2390 0.033 160 1590 0.029 90 4380 0.050 440
10 2870 0.046 260 1910 0.039 150 1270 0.034 90 3500 0.059 410
12 2390 0.054 260 1590 0.046 150 1060 0.041 90 2920 0.070 410
14 2050 0.062 260 1360 0.053 140 910 0.047 90 2500 0.081 410
16 1790 0.072 260 1190 0.061 150 800 0.054 90 2190 0.094 410
18 1590 0.084 270 1060 0.071 150 710 0.063 90 1950 0.109 430
20 1430 0.096 270 960 0.082 160 640 0.072 90 1750 0.125 440
< D3 mm: ae = 0.2D
DRILLING
Material Group
ISO 513 P1 P2 K1 P3 P4 M1 M2 K2 P5 M3 K3 N1 N2 N3 N4
Hardness/Rm < 700 N/mm² 700-1000 N/mm² < 40 HRC
ap x ae 0.5D x D 0.5D x D 0.5D x D 0.5D x D
Vc (m/min) 70-90 40-60 25-35 80-100
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
125480 0.002 120 15920 0.002 60 9550 0.002 30 28660 0.003 180
212740 0.005 120 7960 0.004 60 4780 0.004 30 14330 0.006 180
38490 0.007 120 5310 0.006 60 3180 0.005 30 9550 0.009 180
46370 0.010 120 3980 0.008 60 2390 0.007 30 7170 0.012 180
55100 0.012 120 3180 0.010 60 1910 0.009 30 5730 0.016 180
64250 0.015 130 2650 0.013 70 1590 0.011 40 4780 0.020 190
83180 0.019 120 1990 0.016 60 1190 0.014 30 3580 0.025 180
10 2550 0.023 120 1590 0.019 60 960 0.017 30 2870 0.030 170
12 2120 0.027 110 1330 0.023 60 800 0.020 30 2390 0.035 170
14 1820 0.031 110 1140 0.027 60 680 0.023 30 2050 0.041 170
16 1590 0.036 110 1000 0.031 60 600 0.027 30 1790 0.047 170
18 1420 0.042 120 880 0.036 60 530 0.032 30 1590 0.055 170
20 1270 0.048 120 800 0.041 70 480 0.036 30 1430 0.062 180
< D3 mm: ap = 0.5D
G2 - General purpose - Square
322
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
h stock standard f non-standard stock m stock exhaustion
D D Tol. C C Tol. d(h6) l l1 L z EDP No. Stock
30/-0.020 6 8 57 2 G2WS2030 h
40/-0.020 6 11 57 2 G2WS2040 h
50/-0.020 6 13 57 2 G2WS2050 h
60/-0.020 6 13 57 2 G2WS2060 h
80/-0.025 8 19 63 2 G2WS2080 h
10 0/-0.025 10 22 72 2 G2WS2100 h
12 0/-0.025 12 26 83 2 G2WS2120 h
14 0/-0.030 14 26 83 2 G2WS2140 h
16 0/-0.030 16 32 92 2 G2WS2160 h
20 0/-0.030 20 38 104 2 G2WS2200 h
G2WS2
weldon shank, 2 flutes
OSAWA
NORM
<45
HRC
PMKNSH
+,+,
+ 1st choice , suitable
SLOTTING
SIDE MILLING
DRILLING
G2 - General purpose - Square
323
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
CUTTING PARAMETERS
G2WS2
SLOTTING
Material Group
ISO 513 P1 P2 K1 P3 P4 M1 M2 K2 P5 M3 K3 N1 N2 N3 N4
Hardness/Rm < 700 N/mm² 700-1000 N/mm² < 40 HRC
ap x ae 0.5D x D 0.5D x D 0.5D x D 0.5D x D
Vc (m/min) 80-100 50-70 30-50 100-120
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
39550 0.012 230 6370 0.010 130 4250 0.009 80 11680 0.016 360
47170 0.016 230 4780 0.014 130 3180 0.012 80 8760 0.021 360
55730 0.020 230 3820 0.017 130 2550 0.015 80 7010 0.026 360
64780 0.025 240 3180 0.021 140 2120 0.019 80 5840 0.033 380
83580 0.032 230 2390 0.027 130 1590 0.024 80 4380 0.042 360
10 2870 0.038 220 1910 0.032 120 1270 0.029 70 3500 0.049 350
12 2390 0.045 220 1590 0.038 120 1060 0.034 70 2920 0.059 340
14 2050 0.052 210 1360 0.044 120 910 0.039 70 2500 0.068 340
16 1790 0.060 210 1190 0.051 120 800 0.045 70 2190 0.078 340
18 1590 0.070 220 1060 0.060 130 710 0.053 70 1950 0.091 350
20 1430 0.080 230 960 0.068 130 640 0.060 80 1750 0.104 360
< D3 mm: ap = 0.2D
SIDE MILLING
Material Group
ISO 513 P1 P2 K1 P3 P4 M1 M2 K2 P5 M3 K3 N1 N2 N3 N4
Hardness/Rm < 700 N/mm² 700-1000 N/mm² < 40 HRC
ap x ae 1.5D x 0.3D 1.5D x 0.5D 1.5D x 0.5D 1.5D x 0.5D
Vc (m/min) 80-100 50-70 30-50 100-120
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
39550 0.014 280 6370 0.012 160 4250 0.011 90 11680 0.019 440
47170 0.019 280 4780 0.016 160 3180 0.014 90 8760 0.025 440
55730 0.024 280 3820 0.020 160 2550 0.018 90 7010 0.031 440
64780 0.030 290 3180 0.026 160 2120 0.023 100 5840 0.039 460
83580 0.038 270 2390 0.033 160 1590 0.029 90 4380 0.050 440
10 2870 0.046 260 1910 0.039 150 1270 0.034 90 3500 0.059 410
12 2390 0.054 260 1590 0.046 150 1060 0.041 90 2920 0.070 410
14 2050 0.062 260 1360 0.053 140 910 0.047 90 2500 0.081 410
16 1790 0.072 260 1190 0.061 150 800 0.054 90 2190 0.094 410
18 1590 0.084 270 1060 0.071 150 710 0.063 90 1950 0.109 430
20 1430 0.096 270 960 0.082 160 640 0.072 90 1750 0.125 440
< D3 mm: ae = 0.2D
DRILLING
Material Group
ISO 513 P1 P2 K1 P3 P4 M1 M2 K2 P5 M3 K3 N1 N2 N3 N4
Hardness/Rm < 700 N/mm² 700-1000 N/mm² < 40 HRC
ap x ae D x D D x D 0.5D x D D x D
Vc (m/min) 70-90 40-60 25-35 80-100
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
38490 0.007 120 5310 0.006 60 3180 0.005 30 9550 0.009 180
46370 0.010 120 3980 0.008 60 2390 0.007 30 7170 0.012 180
55100 0.012 120 3180 0.010 60 1910 0.009 30 5730 0.016 180
64250 0.015 130 2650 0.013 70 1590 0.011 40 4780 0.020 190
83180 0.019 120 1990 0.016 60 1190 0.014 30 3580 0.025 180
10 2550 0.023 120 1590 0.019 60 960 0.017 30 2870 0.030 170
12 2120 0.027 110 1330 0.023 60 800 0.020 30 2390 0.035 170
14 1820 0.031 110 1140 0.027 60 680 0.023 30 2050 0.041 170
16 1590 0.036 110 1000 0.031 60 600 0.027 30 1790 0.047 170
18 1420 0.042 120 880 0.036 60 530 0.032 30 1590 0.055 170
20 1270 0.048 120 800 0.041 70 480 0.036 30 1430 0.062 180
< D3 mm: ap = 0.5D
G2 - General purpose - Square
324
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
h stock standard f non-standard stock m stock exhaustion
D D Tol. C C Tol. d(h6) l l1 L z EDP No. Stock
20/-0.030 4 9 75 2 G2210020 h
30/-0.030 4 15 75 2 G2210030 h
40/-0.030 4 20 75 2 G2210040 h
50/-0.030 6 25 75 2 G2210050 h
60/-0.030 6 25 75 2 G2210060 h
50/-0.030 6 30 100 2 G2211050 h
60/-0.030 6 30 100 2 G2211060 h
80/-0.035 8 35 100 2 G2211080 h
10 0/-0.035 10 40 100 2 G2211100 h
12 0/-0.035 12 45 100 2 G2211120 h
80/-0.035 8 40 150 2 G2212080 h
10 0/-0.035 10 50 150 2 G2212100 h
12 0/-0.035 12 50 150 2 G2212120 h
16 0/-0.040 16 70 150 2 G2212160 h
G2210-11-12
cylindrical shank, 2 flutes, long
OSAWA
NORM
<45
HRC
G2210
G2211-G2212
PMKNSH
+,+,
+ 1st choice , suitable
SLOTTING
SIDE MILLING
DRILLING
G2 - General purpose - Square
325
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
CUTTING PARAMETERS
G2210-G2211
SLOTTING
Material Group
ISO 513 P1 P2 K1 P3 P4 M1 M2 K2 P5 M3 K3 N1 N2 N3 N4
Hardness/Rm < 700 N/mm² 700-1000 N/mm² < 40 HRC
ap x ae 0.5D x D 0.5D x D 0.5D x D 0.5D x D
Vc (m/min) 70-90 45-65 30-50 80-120
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
212740 0.007 180 8760 0.006 100 6370 0.005 70 15920 0.009 290
38490 0.010 170 5840 0.009 100 4250 0.008 60 10620 0.013 280
46370 0.014 180 4380 0.012 100 3180 0.011 70 7960 0.018 290
55100 0.018 180 3500 0.015 110 2550 0.014 70 6370 0.023 300
64250 0.023 190 2920 0.019 110 2120 0.017 70 5310 0.029 310
83180 0.030 190 2190 0.026 110 1590 0.023 70 3980 0.039 310
10 2550 0.035 180 1750 0.030 100 1270 0.026 70 3180 0.046 290
12 2120 0.041 170 1460 0.035 100 1060 0.031 70 2650 0.053 280
< D3 mm: ap = 0.2D
SIDE MILLING
Material Group
ISO 513 P1 P2 K1 P3 P4 M1 M2 K2 P5 M3 K3 N1 N2 N3 N4
Hardness/Rm < 700 N/mm² 700-1000 N/mm² < 40 HRC
ap x ae 1.5D x 0.5D 1.5D x 0.5D 1.5D x 0.5D 1.5D x 0.5D
Vc (m/min) 70-90 45-65 30-50 80-120
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
212740 0.008 210 8760 0.007 130 6370 0.006 80 15920 0.011 350
38490 0.012 200 5840 0.010 120 4250 0.009 80 10620 0.016 330
46370 0.017 210 4380 0.014 130 3180 0.013 80 7960 0.022 350
55100 0.022 220 3500 0.018 130 2550 0.016 80 6370 0.028 360
64250 0.027 230 2920 0.023 130 2120 0.020 90 5310 0.035 370
83180 0.036 230 2190 0.031 130 1590 0.027 90 3980 0.047 370
10 2550 0.042 210 1750 0.036 120 1270 0.032 80 3180 0.055 350
12 2120 0.049 210 1460 0.042 120 1060 0.037 80 2650 0.064 340
< D3 mm: ae = 0.2D
DRILLING
Material Group
ISO 513 P1 P2 K1 P3 P4 M1 M2 K2 P5 M3 K3 N1 N2 N3 N4
Hardness/Rm < 700 N/mm² 700-1000 N/mm² < 40 HRC
ap x ae D X D D X D 0.5D X D D X D
Vc (m/min) 60-80 40-60 25-45 70-110
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
211150 0.004 90 7960 0.004 60 5570 0.003 40 14330 0.005 160
37430 0.006 90 5310 0.005 50 3720 0.005 30 9550 0.008 150
45570 0.008 90 3980 0.007 60 2790 0.006 40 7170 0.011 160
54460 0.011 100 3180 0.009 60 2230 0.008 40 5730 0.014 160
63720 0.014 100 2650 0.011 60 1860 0.010 40 4780 0.018 170
82790 0.018 100 1990 0.015 60 1390 0.014 40 3580 0.023 170
10 2230 0.021 90 1590 0.018 60 1110 0.016 30 2870 0.027 160
12 1860 0.025 90 1330 0.021 60 930 0.018 30 2390 0.032 150
< D3 mm: ap = 0.5D
G2 - General purpose - Square
326
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
CUTTING PARAMETERS
G2212
SLOTTING
Material Group
ISO 513 P1 P2 K1 P3 P4 M1 M2 K2 P5 M3 K3 N1 N2 N3 N4
Hardness/Rm < 700 N/mm² 700-1000 N/mm² < 40 HRC
ap x ae 0.3D x D 0.3D x D 0.3D x D 0.3D x D
Vc (m/min) 55-75 40-60 20-40 70-90
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
82590 0.026 130 1990 0.022 90 1190 0.020 50 3180 0.034 210
10 2070 0.032 130 1590 0.027 90 960 0.024 50 2550 0.042 210
12 1730 0.036 120 1330 0.031 80 800 0.027 40 2120 0.047 200
14 1480 0.042 120 1140 0.036 80 680 0.032 40 1820 0.055 200
16 1290 0.048 120 1000 0.041 80 600 0.036 40 1590 0.062 200
SIDE MILLING
Material Group
ISO 513 P1 P2 K1 P3 P4 M1 M2 K2 P5 M3 K3 N1 N2 N3 N4
Hardness/Rm < 700 N/mm² 700-1000 N/mm² < 40 HRC
ap x ae 1.5D x 0.3D 1.5D x 0.3D 1.5D x 0.3D 1.5D x 0.3D
Vc (m/min) 55-75 40-60 20-40 70-90
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
82590 0.031 160 1990 0.027 110 1190 0.023 60 3180 0.041 260
10 2070 0.038 160 1590 0.033 100 960 0.029 60 2550 0.050 250
12 1730 0.043 150 1330 0.037 100 800 0.032 50 2120 0.056 240
14 1480 0.050 150 1140 0.043 100 680 0.038 50 1820 0.066 240
16 1290 0.058 150 1000 0.049 100 600 0.043 50 1590 0.075 240
DRILLING
Material Group
ISO 513 P1 P2 K1 P3 P4 M1 M2 K2 P5 M3 K3 N1 N2 N3 N4
Hardness/Rm < 700 N/mm² 700-1000 N/mm² < 40 HRC
ap x ae D X D D X D 0.5D X D D X D
Vc (m/min) 50-70 35-55 20-30 60-80
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
82390 0.016 70 1790 0.013 50 1000 0.012 20 2790 0.020 110
10 1910 0.019 70 1430 0.016 50 800 0.014 20 2230 0.025 110
12 1590 0.022 70 1190 0.018 40 660 0.016 20 1860 0.028 100
14 1360 0.025 70 1020 0.021 40 570 0.019 20 1590 0.033 100
16 1190 0.029 70 900 0.024 40 500 0.022 20 1390 0.037 100
G2 - General purpose - Square
327
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
h stock standard f non-standard stock m stock exhaustion
D D Tol. C C Tol. d(h6) l l1 L z EDP No. Stock
10/-0.020 4 3 50 3 GB305010 h
1.5 0/-0.020 4 4.5 50 3 GB305015 h
20/-0.020 4 6 50 3 GB305020 h
30/-0.020 4 8 50 3 GB305030 h
40/-0.020 4 11 50 3 GB305040 h
50/-0.020 6 13 50 3 GB305050 h
60/-0.020 6 15 50 3 GB305060 h
80/-0.025 8 20 60 3 GB305080 h
10 0/-0.025 10 30 75 3 GB305100 h
12 0/-0.025 12 30 75 3 GB305120 h
GB305
cylindrical shank, 3 flutes
OSAWA
NORM
<45
HRC
PMKNSH
+,+,
+ 1st choice , suitable
SLOTTING
SIDE MILLING
G2 - General purpose - Square
328
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
CUTTING PARAMETERS
GB305
SLOTTING
Material Group
ISO 513 P1 K1 P2 M1 K2 P3 M2 N1 N2 N3 N4
Hardness/Rm < 700 N/mm² 700-1000 N/mm² < 40 HRC
ap x ae 0.5D x D 0.5D x D 0.3D x D 0.5D x D
Vc (m/min) 50-60 30-50 20-40 70-90
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
117520 0.003 160 12740 0.003 100 9550 0.002 60 25480 0.004 300
28760 0.006 160 6370 0.005 100 4780 0.004 60 12740 0.008 300
35840 0.009 150 4250 0.007 90 3180 0.006 60 8490 0.011 280
44380 0.012 160 3180 0.010 100 2390 0.009 60 6370 0.016 300
53500 0.015 160 2550 0.013 100 1910 0.012 70 5100 0.020 310
62920 0.020 170 2120 0.017 110 1590 0.015 70 4250 0.026 330
82190 0.026 170 1590 0.022 100 1190 0.019 70 3180 0.033 320
10 1750 0.032 170 1270 0.028 110 960 0.024 70 2550 0.042 320
12 1460 0.038 170 1060 0.033 100 800 0.029 70 2120 0.050 320
< D3 mm: ap = 0.2D
SIDE MILLING
Material Group
ISO 513 P1 K1 P2 M1 K2 P3 M2 N1 N2 N3 N4
Hardness/Rm < 700 N/mm² 700-1000 N/mm² < 40 HRC
ap x ae 1.5D x 0.3D 1.5D x 0.3D 1.5D x 0.2D 1.5D x 0.3D
Vc (m/min) 50-70 40-50 20-40 80-100
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
119110 0.004 210 14330 0.003 130 9550 0.003 80 28660 0.005 400
29550 0.007 210 7170 0.006 130 4780 0.005 80 14330 0.009 400
36370 0.010 200 4780 0.009 130 3180 0.008 70 9550 0.013 380
44780 0.014 210 3580 0.012 130 2390 0.011 80 7170 0.019 400
53820 0.018 210 2870 0.016 140 1910 0.014 80 5730 0.024 410
63180 0.024 230 2390 0.020 140 1590 0.018 80 4780 0.031 440
82390 0.031 220 1790 0.026 140 1190 0.023 80 3580 0.040 430
10 1910 0.039 220 1430 0.033 140 960 0.029 80 2870 0.051 440
12 1590 0.046 220 1190 0.039 140 800 0.035 80 2390 0.060 430
< D3 mm: ae = 0.1D
G2 - General purpose - Square
329
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
h stock standard f non-standard stock m stock exhaustion
D D Tol. C C Tol. d(h6) l l1 L z EDP No. Stock
10/-0.020 4 3 50 3 G2CSH3010 h
1.5 0/-0.020 4 4.5 50 3 G2CSH3015 h
20/-0.020 4 6 50 3 G2CSH3020 h
2.5 0/-0.020 4 7 50 3 G2CSH3025 h
30/-0.020 4 8 50 3 G2CSH3030 h
3.5 0/-0.020 4 10 50 3 G2CSH3035 h
40/-0.020 4 11 50 3 G2CSH3040 h
4.5 0/-0.020 6 13 50 3 G2CSH3045 h
50/-0.020 6 13 50 3 G2CSH3050 h
5.5 0/-0.020 6 13 50 3 G2CSH3055 h
60/-0.020 6 15 50 3 G2CSH3060 h
6.5 0/-0.025 8 17 60 3 G2CSH3065 h
70/-0.025 8 17 60 3 G2CSH3070 h
7.5 0/-0.025 8 17 60 3 G2CSH3075 h
80/-0.025 8 20 60 3 G2CSH3080 h
8.5 0/-0.025 10 23 75 3 G2CSH3085 h
90/-0.025 10 23 75 3 G2CSH3090 h
10 0/-0.025 10 30 75 3 G2CSH3100 h
11 0/-0.025 12 28 75 3 G2CSH3110 h
12 0/-0.025 12 30 75 3 G2CSH3120 h
14 0/-0.030 14 26 83 3 G2CSH3140 h
16 0/-0.030 16 32 92 3 G2CSH3160 h
18 0/-0.030 20 40 100 3 G2CSH3180 h
20 0/-0.030 20 40 100 3 G2CSH3200 h
G2CSH3
cylindrical shank, 3 flutes
OSAWA
NORM
<45
HRC
PMKNSH
+,+,
+ 1st choice , suitable
SLOTTING
SIDE MILLING
G2 - General purpose - Square
330
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
CUTTING PARAMETERS
G2CSH3
SLOTTING
Material Group
ISO 513 P1 P2 K1 P3 P4 M1 M2 K2 P5 M3 K3 N1 N2 N3 N4
Hardness/Rm < 700 N/mm² 700-1000 N/mm² < 40 HRC
ap x ae 0.5D x D 0.5D x D 0.5D x D 0.5D x D
Vc (m/min) 80-100 50-70 30-50 80-120
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
128660 0.003 260 19110 0.003 150 12740 0.002 90 31850 0.004 370
214330 0.006 270 9550 0.005 150 6370 0.005 90 15920 0.008 390
39550 0.009 270 6370 0.008 150 4250 0.007 90 10620 0.012 390
47170 0.013 270 4780 0.011 150 3180 0.009 90 7960 0.016 390
55730 0.016 270 3820 0.013 150 2550 0.012 90 6370 0.020 390
64780 0.019 270 3180 0.016 150 2120 0.014 90 5310 0.024 390
83580 0.025 270 2390 0.021 150 1590 0.019 90 3980 0.033 390
10 2870 0.031 270 1910 0.027 150 1270 0.023 90 3180 0.041 390
12 2390 0.040 290 1590 0.034 160 1060 0.030 100 2650 0.052 410
14 2050 0.046 280 1360 0.039 160 910 0.035 90 2270 0.060 410
16 1790 0.056 300 1190 0.048 170 800 0.042 100 1990 0.073 440
18 1590 0.065 310 1060 0.055 180 710 0.049 100 1770 0.085 450
20 1430 0.075 320 960 0.064 180 640 0.056 110 1590 0.098 470
< D3 mm: ap = 0.2D
SIDE MILLING
Material Group
ISO 513 P1 P2 K1 P3 P4 M1 M2 K2 P5 M3 K3 N1 N2 N3 N4
Hardness/Rm < 700 N/mm² 700-1000 N/mm² < 40 HRC
ap x ae 1.5D x 0.3D 1.5D x 0.3D 1.5D x 0.3D 1.5D x 0.3D
Vc (m/min) 90-110 60-80 40-60 110-120
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
131850 0.004 340 22290 0.003 200 15920 0.003 130 38220 0.005 540
215920 0.008 360 11150 0.006 210 7960 0.006 130 19110 0.010 560
310620 0.011 360 7430 0.010 210 5310 0.008 130 12740 0.015 560
47960 0.015 360 5570 0.013 210 3980 0.011 130 9550 0.020 560
56370 0.019 360 4460 0.016 210 3180 0.014 130 7640 0.024 560
65310 0.023 360 3720 0.019 210 2650 0.017 130 6370 0.029 560
83980 0.030 360 2790 0.026 210 1990 0.023 130 4780 0.039 560
10 3180 0.038 360 2230 0.032 210 1590 0.028 130 3820 0.049 560
12 2650 0.048 380 1860 0.041 230 1330 0.036 140 3180 0.062 600
14 2270 0.056 380 1590 0.047 230 1140 0.042 140 2730 0.072 590
16 1990 0.068 400 1390 0.057 240 1000 0.051 150 2390 0.088 630
18 1770 0.078 410 1240 0.066 250 880 0.059 150 2120 0.101 640
20 1590 0.090 430 1110 0.077 250 800 0.068 160 1910 0.117 670
< D3 mm: ae = 0.1D
G2 - General purpose - Square
331
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
h stock standard f non-standard stock m stock exhaustion
D D Tol. C C Tol. d(h6) l l1 L z EDP No. Stock
30/-0.020 6 8 57 3 G2WSH3030 h
40/-0.020 6 11 57 3 G2WSH3040 h
50/-0.020 6 13 57 3 G2WSH3050 h
60/-0.020 6 13 57 3 G2WSH3060 h
80/-0.025 8 19 63 3 G2WSH3080 h
10 0/-0.025 10 22 72 3 G2WSH3100 h
12 0/-0.025 12 26 83 3 G2WSH3120 h
14 0/-0.030 14 26 83 3 G2WSH3140 h
16 0/-0.030 16 32 92 3 G2WSH3160 h
20 0/-0.030 20 38 104 3 G2WSH3200 h
G2WSH3
weldon shank, 3 flutes
OSAWA
NORM
<45
HRC
PMKNSH
+,+,
+ 1st choice , suitable
SLOTTING
SIDE MILLING
G2 - General purpose - Square
332
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
CUTTING PARAMETERS
G2WSH3
SLOTTING
Material Group
ISO 513 P1 P2 K1 P3 P4 M1 M2 K2 P5 M3 K3 N1 N2 N3 N4
Hardness/Rm < 700 N/mm² 700-1000 N/mm² < 40 HRC
ap x ae 0.5D x D 0.5D x D 0.5D x D 0.5D x D
Vc (m/min) 80-100 50-70 30-50 80-120
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
39550 0.009 270 6370 0.008 150 4250 0.007 90 10620 0.012 390
47170 0.013 270 4780 0.011 150 3180 0.009 90 7960 0.016 390
55730 0.016 270 3820 0.013 150 2550 0.012 90 6370 0.020 390
64780 0.019 270 3180 0.016 150 2120 0.014 90 5310 0.024 390
83580 0.025 270 2390 0.021 150 1590 0.019 90 3980 0.033 390
10 2870 0.031 270 1910 0.027 150 1270 0.023 90 3180 0.041 390
12 2390 0.040 290 1590 0.034 160 1060 0.030 100 2650 0.052 410
14 2050 0.046 280 1360 0.039 160 910 0.035 90 2270 0.060 410
16 1790 0.056 300 1190 0.048 170 800 0.042 100 1990 0.073 440
18 1590 0.065 310 1060 0.055 180 710 0.049 100 1770 0.085 450
20 1430 0.075 320 960 0.064 180 640 0.056 110 1590 0.098 470
< D3 mm: ap = 0.2D
SIDE MILLING
Material Group
ISO 513 P1 P2 K1 P3 P4 M1 M2 K2 P5 M3 K3 N1 N2 N3 N4
Hardness/Rm < 700 N/mm² 700-1000 N/mm² < 40 HRC
ap x ae 1.5D x 0.3D 1.5D x 0.3D 1.5D x 0.3D 1.5D x 0.3D
Vc (m/min) 90-110 60-80 40-60 110-120
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
310620 0.011 360 7430 0.010 210 5310 0.008 130 12740 0.015 560
47960 0.015 360 5570 0.013 210 3980 0.011 130 9550 0.020 560
56370 0.019 360 4460 0.016 210 3180 0.014 130 7640 0.024 560
65310 0.023 360 3720 0.019 210 2650 0.017 130 6370 0.029 560
83980 0.030 360 2790 0.026 210 1990 0.023 130 4780 0.039 560
10 3180 0.038 360 2230 0.032 210 1590 0.028 130 3820 0.049 560
12 2650 0.048 380 1860 0.041 230 1330 0.036 140 3180 0.062 600
14 2270 0.056 380 1590 0.047 230 1140 0.042 140 2730 0.072 590
16 1990 0.068 400 1390 0.057 240 1000 0.051 150 2390 0.088 630
18 1770 0.078 410 1240 0.066 250 880 0.059 150 2120 0.101 640
20 1590 0.090 430 1110 0.077 250 800 0.068 160 1910 0.117 670
< D3 mm: ae = 0.1D
G2 - General purpose - Square
333
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
h stock standard f non-standard stock m stock exhaustion
D D Tol. C C Tol. d(h6) l l1 L z EDP No. Stock
20/-0.030 4 9 75 3 G2310020 h
30/-0.030 4 15 75 3 G2310030 h
40/-0.030 4 20 75 3 G2310040 h
50/-0.030 6 25 75 3 G2310050 h
60/-0.030 6 25 75 3 G2310060 h
40/-0.030 6 25 100 3 G2311040 h
50/-0.030 6 30 100 3 G2311050 h
60/-0.030 6 30 100 3 G2311060 h
70/-0.030 8 35 100 3 G2311070 h
80/-0.035 8 35 100 3 G2311080 h
90/-0.035 10 40 100 3 G2311090 h
10 0/-0.035 10 40 100 3 G2311100 h
11 0/-0.035 12 45 100 3 G2311110 h
12 0/-0.035 12 45 100 3 G2311120 h
80/-0.035 8 40 150 3 G2312080 h
10 0/-0.035 10 50 150 3 G2312100 h
12 0/-0.035 12 50 150 3 G2312120 h
16 0/-0.040 16 70 150 3 G2312160 h
20 0/-0.040 20 80 150 3 G2312200 h
G2310-11-12
cylindrical shank, 3 flutes, long
OSAWA
NORM
<45
HRC
G2310
G2311-G2312
PMKNSH
+,+,
+ 1st choice , suitable
SLOTTING
SIDE MILLING
G2 - General purpose - Square
334
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
CUTTING PARAMETERS
G2310-G2311
SLOTTING
Material Group
ISO 513 P1 P2 K1 P3 P4 M1 M2 K2 P5 M3 K3 N1 N2 N3 N4
Hardness/Rm < 700 N/mm² 700-1000 N/mm² < 40 HRC
ap x ae 0.5D x D 0.5D x D 0.5D x D 0.5D x D
Vc (m/min) 60-80 35-55 25-35 80-100
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
211150 0.006 190 7170 0.005 100 4780 0.004 60 14330 0.007 310
37430 0.008 190 4780 0.007 100 3180 0.006 60 9550 0.011 310
45570 0.011 190 3580 0.010 100 2390 0.008 60 7170 0.015 310
54460 0.014 190 2870 0.012 100 1910 0.011 60 5730 0.018 310
63720 0.017 190 2390 0.014 100 1590 0.013 60 4780 0.022 310
82790 0.023 190 1790 0.019 100 1190 0.017 60 3580 0.029 310
10 2230 0.028 190 1430 0.024 100 960 0.021 60 2870 0.037 310
12 1860 0.036 200 1190 0.031 110 800 0.027 60 2390 0.047 340
< D3 mm: ap = 0.2D
SIDE MILLING
Material Group
ISO 513 P1 P2 K1 P3 P4 M1 M2 K2 P5 M3 K3 N1 N2 N3 N4
Hardness/Rm < 700 N/mm² 700-1000 N/mm² < 40 HRC
ap x ae 1.5D x 0.3D 1.5D x 0.3D 1.5D x 0.3D 1.5D x 0.3D
Vc (m/min) 70-90 45-65 30-50 80-120
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
212740 0.007 270 8760 0.006 160 6370 0.005 100 15920 0.009 440
38490 0.011 270 5840 0.009 160 4250 0.008 100 10620 0.014 440
46370 0.014 270 4380 0.012 160 3180 0.011 100 7960 0.018 440
55100 0.018 270 3500 0.015 160 2550 0.013 100 6370 0.023 440
64250 0.021 270 2920 0.018 160 2120 0.016 100 5310 0.027 440
83180 0.028 270 2190 0.024 160 1590 0.021 100 3980 0.037 440
10 2550 0.035 270 1750 0.030 160 1270 0.026 100 3180 0.046 440
12 2120 0.045 290 1460 0.038 170 1060 0.034 110 2650 0.059 470
< D3 mm: ae = 0.1D
G2312
SIDE MILLING
Material Group
ISO 513 P1 P2 K1 P3 P4 M1 M2 K2 P5 M3 K3 N1 N2 N3 N4
Hardness/Rm < 700 N/mm² 700-1000 N/mm² < 40 HRC
ap x ae 1.5D x 0.2D 1.5D x 0.2D 1.5D x 0.2D 1.5D x 0.2D
Vc (m/min) 55-75 40-60 20-40 70-90
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
82590 0.020 160 1990 0.017 100 1190 0.015 50 3180 0.026 250
10 2070 0.025 160 1590 0.021 100 960 0.019 50 2550 0.033 250
12 1730 0.032 170 1330 0.027 110 800 0.024 60 2120 0.042 260
14 1480 0.037 160 1140 0.031 110 680 0.028 60 1820 0.048 260
16 1290 0.045 170 1000 0.038 110 600 0.034 60 1590 0.059 280
G2 - General purpose - Square
335
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
h stock standard f non-standard stock m stock exhaustion
D D Tol. C C Tol. d(h6) l l1 L z EDP No. Stock
10/-0.020 4 3 50 4 GB405010 h
1.5 0/-0.020 4 4.5 50 4 GB405015 h
20/-0.020 4 6 50 4 GB405020 h
30/-0.020 4 8 50 4 GB405030 h
40/-0.020 4 11 50 4 GB405040 h
50/-0.020 6 13 50 4 GB405050 h
60/-0.020 6 15 50 4 GB405060 h
80/-0.025 8 20 60 4 GB405080 h
10 0/-0.025 10 30 75 4 GB405100 h
12 0/-0.025 12 30 75 4 GB405120 h
GB405
cylindrical shank, 4 flutes
OSAWA
NORM
<45
HRC
PMKNSH
+,+,
+ 1st choice , suitable
SIDE MILLING
G2 - General purpose - Square
336
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
CUTTING PARAMETERS
GB405
SIDE MILLING
Material Group
ISO 513 P1 K1 P2 M1 K2 P3 M2 N1 N2 N3 N4
Hardness/Rm < 700 N/mm² 700-1000 N/mm² < 40 HRC
ap x ae 1.5D x 0.2D 1.5D x 0.2D 1.5D x 0.2D 1.5D x 0.2D
Vc (m/min) 50-70 40-50 20-40 80-100
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
119110 0.003 250 14330 0.003 160 9550 0.002 90 28660 0.004 480
29550 0.006 250 7170 0.006 160 4780 0.005 90 14330 0.008 480
36370 0.010 250 4780 0.008 160 3180 0.007 90 9550 0.013 480
44780 0.013 250 3580 0.011 160 2390 0.010 90 7170 0.017 480
53820 0.016 250 2870 0.014 160 1910 0.012 90 5730 0.021 480
63180 0.020 260 2390 0.017 160 1590 0.015 100 4780 0.026 500
82390 0.026 250 1790 0.022 160 1190 0.019 90 3580 0.034 480
10 1910 0.031 240 1430 0.026 150 960 0.023 90 2870 0.040 460
12 1590 0.036 230 1190 0.031 150 800 0.027 90 2390 0.047 450
< D3 mm: ae = 0.1D
G2 - General purpose - Square
337
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
h stock standard f non-standard stock m stock exhaustion
D D Tol. C C Tol. d(h6) l l1 L z EDP No. Stock
10/-0.020 4 3 50 4 G2CS4010 h
1.5 0/-0.020 4 4.5 50 4 G2CS4015 h
20/-0.020 4 6 50 4 G2CS4020 h
2.5 0/-0.020 4 7 50 4 G2CS4025 h
30/-0.020 4 8 50 4 G2CS4030 h
3.5 0/-0.020 4 10 50 4 G2CS4035 h
40/-0.020 4 11 50 4 G2CS4040 h
4.5 0/-0.020 6 13 50 4 G2CS4045 h
50/-0.020 6 13 50 4 G2CS4050 h
5.5 0/-0.020 6 13 50 4 G2CS4055 h
60/-0.020 6 15 50 4 G2CS4060 h
6.5 0/-0.025 8 17 60 4 G2CS4065 h
70/-0.025 8 17 60 4 G2CS4070 h
7.5 0/-0.025 8 17 60 4 G2CS4075 h
80/-0.025 8 20 60 4 G2CS4080 h
8.5 0/-0.025 10 23 75 4 G2CS4085 h
90/-0.025 10 23 75 4 G2CS4090 h
9.5 0/-0.025 10 25 75 4 G2CS4095 h
10 0/-0.025 10 30 75 4 G2CS4100 h
10.5 0/-0.025 12 25 75 4 G2CS4105 h
11 0/-0.025 12 30 75 4 G2CS4110 h
11.5 0/-0.025 12 28 75 4 G2CS4115 h
12 0/-0.025 12 30 75 4 G2CS4120 h
12.5 0/-0.030 14 26 83 4 G2CS4125 h
13 0/-0.030 14 26 83 4 G2CS4130 h
13.5 0/-0.030 14 26 83 4 G2CS4135 h
14 0/-0.030 14 26 83 4 G2CS4140 h
14.5 0/-0.030 16 32 92 4 G2CS4145 h
15 0/-0.030 16 32 92 4 G2CS4150 h
15.5 0/-0.030 16 32 92 4 G2CS4155 h
16 0/-0.030 16 32 92 4 G2CS4160 h
17 0/-0.030 20 40 100 4 G2CS4170 h
18 0/-0.030 20 40 100 4 G2CS4180 h
19 0/-0.030 20 40 100 4 G2CS4190 h
20 0/-0.030 20 40 100 4 G2CS4200 h
22 0/-0.030 25 40 100 4 G2CS4220 h
25 0/-0.030 25 40 100 4 G2CS4250 h
G2CS4
cylindrical shank, 4 flutes
OSAWA
NORM
<45
HRC
PMKNSH
+,+,
+ 1st choice , suitable
SIDE MILLING
G2 - General purpose - Square
338
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
CUTTING PARAMETERS
G2CS4
SIDE MILLING
Material Group
ISO 513 P1 P2 K1 P3 P4 M1 M2 K2 P5 M3 K3 N1 N2 N3 N4
Hardness/Rm < 700 N/mm² 700-1000 N/mm² < 40 HRC
ap x ae 1.5D x 0.2D 1.5D x 0.2D 1.5D x 0.2D 1.5D x 0.2D
Vc (m/min) 80-100 50-70 30-50 100-120
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
128660 0.004 400 19110 0.003 230 12740 0.003 130 35030 0.005 640
214330 0.007 400 9550 0.006 230 6370 0.005 130 17520 0.009 640
39550 0.010 380 6370 0.009 220 4250 0.008 130 11680 0.013 610
47170 0.013 370 4780 0.011 210 3180 0.010 120 8760 0.017 590
55730 0.016 370 3820 0.014 210 2550 0.012 120 7010 0.021 580
64780 0.019 360 3180 0.016 210 2120 0.014 120 5840 0.025 580
83580 0.025 360 2390 0.021 200 1590 0.019 120 4380 0.033 570
10 2870 0.032 370 1910 0.027 210 1270 0.024 120 3500 0.042 580
12 2390 0.040 380 1590 0.034 220 1060 0.030 130 2920 0.052 610
14 2050 0.047 390 1360 0.040 220 910 0.035 130 2500 0.061 610
16 1790 0.054 390 1190 0.046 220 800 0.041 130 2190 0.070 610
18 1590 0.060 380 1060 0.051 220 710 0.045 130 1950 0.078 610
20 1430 0.065 370 960 0.055 210 640 0.049 120 1750 0.085 590
22 1300 0.073 380 870 0.062 220 580 0.055 130 1590 0.095 600
25 1150 0.083 380 760 0.071 210 510 0.062 130 1400 0.108 600
< D3 mm: ae = 0.1D
G2 - General purpose - Square
339
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
h stock standard f non-standard stock m stock exhaustion
D D Tol. C C Tol. d(h6) l l1 L z EDP No. Stock
30/-0.020 6 8 57 4 G2WS4030 h
40/-0.020 6 11 57 4 G2WS4040 h
50/-0.020 6 13 57 4 G2WS4050 h
60/-0.020 6 13 57 4 G2WS4060 h
80/-0.025 8 19 63 4 G2WS4080 h
10 0/-0.025 10 22 72 4 G2WS4100 h
12 0/-0.025 12 26 83 4 G2WS4120 h
14 0/-0.030 14 26 83 4 G2WS4140 h
16 0/-0.030 16 32 92 4 G2WS4160 h
20 0/-0.030 20 38 104 4 G2WS4200 h
G2WS4
weldon shank, 4 flutes
OSAWA
NORM
<45
HRC
PMKNSH
+,+,
+ 1st choice , suitable
SIDE MILLING
G2 - General purpose - Square
340
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
CUTTING PARAMETERS
G2WS4
SIDE MILLING
Material Group
ISO 513 P1 P2 K1 P3 P4 M1 M2 K2 P5 M3 K3 N1 N2 N3 N4
Hardness/Rm < 700 N/mm² 700-1000 N/mm² < 40 HRC
ap x ae 1.5D x 0.2D 1.5D x 0.2D 1.5D x 0.2D 1.5D x 0.2D
Vc (m/min) 80-100 50-70 30-50 100-120
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
39550 0.01 380 6370 0.0085 220 4250 0.0075 130 11680 0.013 610
47170 0.013 370 4780 0.011 210 3180 0.010 120 8760 0.017 590
55730 0.016 370 3820 0.014 210 2550 0.012 120 7010 0.021 580
64780 0.019 360 3180 0.016 210 2120 0.014 120 5840 0.025 580
83580 0.025 360 2390 0.021 200 1590 0.019 120 4380 0.033 570
10 2870 0.032 370 1910 0.027 210 1270 0.024 120 3500 0.042 580
12 2390 0.040 380 1590 0.034 220 1060 0.030 130 2920 0.052 610
14 2050 0.047 390 1360 0.040 220 910 0.035 130 2500 0.061 610
16 1790 0.054 390 1190 0.046 220 800 0.041 130 2190 0.070 610
18 1590 0.060 380 1060 0.051 220 710 0.045 130 1950 0.078 610
20 1430 0.065 370 960 0.055 210 640 0.049 120 1750 0.085 590
G2 - General purpose - Square
341
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
h stock standard f non-standard stock m stock exhaustion
D D Tol. C C Tol. d(h6) l l1 L z EDP No. Stock
20/-0.030 4 9 75 4 G2410020 h
2.5 0/-0.030 4 10 75 4 G2410025 h
30/-0.030 4 15 75 4 G2410030 h
3.5 0/-0.030 4 15 75 4 G2410035 h
40/-0.030 4 20 75 4 G2410040 h
4.5 0/-0.030 6 20 75 4 G2410045 h
50/-0.030 6 25 75 4 G2410050 h
60/-0.030 6 25 75 4 G2410060 h
30/-0.030 6 15 100 4 G2411030 h
40/-0.030 6 25 100 4 G2411040 h
50/-0.030 6 30 100 4 G2411050 h
60/-0.030 6 30 100 4 G2411060 h
70/-0.030 8 35 100 4 G2411070 h
80/-0.035 8 35 100 4 G2411080 h
90/-0.035 10 40 100 4 G2411090 h
10 0/-0.035 10 40 100 4 G2411100 h
11 0/-0.035 12 45 100 4 G2411110 h
12 0/-0.035 12 45 100 4 G2411120 h
80/-0.035 8 40 150 4 G2412080 h
10 0/-0.035 10 50 150 4 G2412100 h
12 0/-0.035 12 50 150 4 G2412120 h
16 0/-0.040 16 70 150 4 G2412160 h
18 0/-0.040 20 80 150 4 G2412180 h
20 0/-0.040 20 80 150 4 G2412200 h
16 0/-0.040 16 40 200 4 G2413160 h
20 0/-0.040 20 40 200 4 G2413200 h
G2410-11-12-13
cylindrical shank, 4 flutes, long
OSAWA
NORM
<45
HRC
G2410
G2411-G2412-G2413
PMKNSH
+,+,
+ 1st choice , suitable
SIDE MILLING
G2 - General purpose - Square
342
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
CUTTING PARAMETERS
G2410-G2411
SIDE MILLING
Material Group
ISO 513 P1 P2 K1 P3 P4 M1 M2 K2 P5 M3 K3 N1 N2 N3 N4
Hardness/Rm < 700 N/mm² 700-1000 N/mm² < 40 HRC
ap x ae 1.5D x 0.1D 1.5D x 0.1D 1.5D x 0.1D 1.5D x 0.1D
Vc (m/min) 70-90 45-65 30-50 80-120
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
mm rpm mm/rev mm/min rpm mm/rev mm/min rpm mm/rev mm/min rpm mm/rev mm/min
212740 0.006 320 8760 0.005 190 6370 0.005 120 15920 0.008 520
38490 0.009 310 5840 0.008 180 4250 0.007 110 10620 0.012 500
46370 0.012 300 4380 0.010 170 3180 0.009 110 7960 0.015 480
55100 0.014 290 3500 0.012 170 2550 0.011 110 6370 0.019 480
64250 0.017 290 2920 0.015 170 2120 0.013 110 5310 0.022 470
83180 0.023 290 2190 0.019 170 1590 0.017 110 3980 0.029 470
10 2550 0.029 290 1750 0.024 170 1270 0.022 110 3180 0.037 480
12 2120 0.036 310 1460 0.031 180 1060 0.027 110 2650 0.047 500
G2412-G2413
SIDE MILLING
Material Group
ISO 513 P1 P2 K1 P3 P4 M1 M2 K2 P5 M3 K3 N1 N2 N3 N4
Hardness/Rm < 700 N/mm² 700-1000 N/mm² < 40 HRC
ap x ae 1.5D x 0.1D 1.5D x 0.1D 1.5D x 0.1D 1.5D x 0.1D
Vc (m/min) 55-75 40-60 20-40 70-90
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
82590 0.020 210 1990 0.017 140 1190 0.015 70 3180 0.026 330
10 2070 0.026 210 1590 0.022 140 960 0.019 70 2550 0.033 340
12 1730 0.032 220 1330 0.027 140 800 0.024 80 2120 0.042 350
14 1480 0.038 220 1140 0.032 150 680 0.028 80 1820 0.049 360
16 1290 0.043 220 1000 0.037 150 600 0.032 80 1590 0.056 360
20 1040 0.065 270 800 0.055 180 480 0.049 90 1270 0.085 430
G2 - General purpose - Square
343
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
h stock standard f non-standard stock m stock exhaustion
D D Tol. C C Tol. d(h6) l l1 L z EDP No. Stock
60/-0.020 6 15 50 6 G2CSHM060 h
80/-0.025 8 20 60 6 G2CSHM080 h
10 0/-0.025 10 30 75 6 G2CSHM100 h
12 0/-0.025 12 30 75 6 G2CSHM120 h
14 0/-0.030 14 30 83 6 G2CSHM140 h
16 0/-0.030 16 35 92 6 G2CSHM160 h
20 0/-0.030 20 40 100 6 G2CSHM200 h
G2CSHM
cylindrical shank, multi flute
OSAWA
NORM
<45
HRC
PMKNSH
+,+,
+ 1st choice , suitable
SIDE MILLING
G2 - General purpose - Square
344
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
CUTTING PARAMETERS
G2CSHM
SIDE MILLING
Material Group
ISO 513 P1 P2 K1 P3 P4 M1 M2 K2 P5 M3 K3
Hardness/Rm < 700 N/mm² 700-1000 N/mm² < 40 HRC
ap x ae 1.5D x 0.1D 1.5D x 0.1D 1.5D x 0.1D
Vc (m/min) 100-120 70-90 50-70
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
65840 0.016 560 4250 0.014 350 3180 0.012 230
84380 0.020 530 3180 0.017 320 2390 0.015 220
10 3500 0.025 530 2550 0.021 330 1910 0.019 210
12 2920 0.030 530 2120 0.026 320 1590 0.023 210
14 2500 0.035 530 1820 0.030 320 1360 0.026 210
16 2190 0.040 530 1590 0.034 320 1190 0.030 210
20 1750 0.050 530 1270 0.043 320 960 0.038 220
G2 - General purpose - Square
345
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
h stock standard f non-standard stock m stock exhaustion
D D Tol. C C Tol. d(h6) l l1 L z EDP No. Stock
40/-0.070 6 11 50 3 G2CSFR040 h
50/-0.070 6 13 50 3 G2CSFR050 h
60/-0.070 6 15 50 3 G2CSFR060 h
70/-0.070 8 20 60 3 G2CSFR070 h
80/-0.070 8 20 60 3 G2CSFR080 h
90/-0.070 10 25 75 3 G2CSFR090 h
10 0/-0.070 10 30 75 4 G2CSFR100 h
11 0/-0.070 12 30 75 4 G2CSFR110 h
12 0/-0.070 12 30 75 4 G2CSFR120 h
13 0/-0.070 14 30 83 4 G2CSFR130 h
14 0/-0.070 14 30 83 4 G2CSFR140 h
15 0/-0.070 16 30 92 4 G2CSFR150 h
16 0/-0.070 16 35 92 4 G2CSFR160 h
20 0/-0.070 20 40 100 4 G2CSFR200 h
G2CSFR
cylindrical shank, roughing HR
OSAWA
NORM
<45
HRC
PMKNSH
+,+,
+ 1st choice , suitable
SIDE MILLING
G2 - General purpose - Square
346
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
CUTTING PARAMETERS
G2CSFR
SIDE MILLING
Material Group
ISO 513 P1 P2 K1 P3 P4 M1 M2 K2 P5 M3 K3
Hardness/Rm < 700 N/mm² 700-1000 N/mm² < 40 HRC
ap x ae 1.5D x 0.3D 1.5D x 0.3D 1.5D x 0.3D
Vc (m/min) 70-90 50-70 30-50
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
64250 0.030 380 3180 0.026 320 2120 0.023 190
83180 0.045 430 2390 0.038 370 1590 0.034 210
10 2550 0.060 610 1910 0.051 390 1270 0.045 230
12 2120 0.072 610 1590 0.061 390 1060 0.054 230
14 1820 0.085 620 1360 0.072 390 910 0.064 230
16 1590 0.096 610 1190 0.082 390 800 0.072 230
20 1270 0.120 610 960 0.102 390 640 0.090 230
D6-9: Z3
D10-20: Z4
G2 - General purpose - Square
347
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
h stock standard f non-standard stock m stock exhaustion
D D Tol. C C Tol. d(h6) l l1 L z EDP No. Stock
60/-0.070 6 13 57 3 G2WSFR060 h
80/-0.070 8 19 63 3 G2WSFR080 h
10 0/-0.070 10 22 72 4 G2WSFR100 h
12 0/-0.070 12 26 83 4 G2WSFR120 h
14 0/-0.070 14 26 83 4 G2WSFR140 h
16 0/-0.070 16 32 92 4 G2WSFR160 h
20 0/-0.070 20 38 104 4 G2WSFR200 h
G2WSFR
weldon shank, roughing HR
OSAWA
NORM
<45
HRC
PMKNSH
+,+,
+ 1st choice , suitable
SIDE MILLING
G2 - General purpose - Square
348
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
CUTTING PARAMETERS
G2WSFR
SIDE MILLING
Material Group
ISO 513 P1 P2 K1 P3 P4 M1 M2 K2 P5 M3 K3
Hardness/Rm < 700 N/mm² 700-1000 N/mm² < 40 HRC
ap x ae 1.5D x 0.3D 1.5D x 0.3D 1.5D x 0.3D
Vc (m/min) 70-90 50-70 30-50
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
64250 0.030 380 3180 0.026 320 2120 0.023 190
83180 0.045 430 2390 0.038 370 1590 0.034 210
10 2550 0.060 610 1910 0.051 390 1270 0.045 230
12 2120 0.072 610 1590 0.061 390 1060 0.054 230
14 1820 0.085 620 1360 0.072 390 910 0.064 230
16 1590 0.096 610 1190 0.082 390 800 0.072 230
20 1270 0.120 610 960 0.102 390 640 0.090 230
D6-8: Z3
D10-20: Z4
G2 - General purpose - Corner radius
349
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
h stock standard f non-standard stock m stock exhaustion
D D Tol. CR CR Tol. d(h6) l l1 L z EDP No. Stock
10/-0.020 0.20 +/-0.010 4 2 50 2 G2CS2R02010 h
1.5 0/-0.020 0.20 +/-0.010 4 3 50 2 G2CS2R02015 h
1.5 0/-0.020 0.50 +/-0.010 4 3 50 2 G2CS2R05015 h
20/-0.020 0.20 +/-0.010 4 4 50 2 G2CS2R02020 h
20/-0.020 0.50 +/-0.010 4 4 50 2 G2CS2R05020 h
2.5 0/-0.020 0.20 +/-0.010 4 5 50 2 G2CS2R02025 h
2.5 0/-0.020 0.50 +/-0.010 4 5 50 2 G2CS2R05025 h
30/-0.020 0.20 +/-0.010 4 6 50 2 G2CS2R02030 h
30/-0.020 0.50 +/-0.010 4 6 50 2 G2CS2R05030 h
30/-0.020 1.00 +/-0.010 4 6 50 2 G2CS2R10030 h
40/-0.020 0.20 +/-0.010 4 8 50 2 G2CS2R02040 h
40/-0.020 0.50 +/-0.010 4 8 50 2 G2CS2R05040 h
40/-0.020 1.00 +/-0.010 4 8 50 2 G2CS2R10040 h
50/-0.020 0.50 +/-0.010 6 10 50 2 G2CS2R05050 h
50/-0.020 1.00 +/-0.010 6 10 50 2 G2CS2R10050 h
60/-0.020 0.20 +/-0.010 6 12 50 2 G2CS2R02060 h
60/-0.020 0.50 +/-0.010 6 12 50 2 G2CS2R05060 h
60/-0.020 1.00 +/-0.010 6 12 50 2 G2CS2R10060 h
60/-0.020 1.50 +/-0.010 6 12 50 2 G2CS2R15060 h
60/-0.020 2.00 +/-0.010 6 12 50 2 G2CS2R20060 h
80/-0.025 0.50 +/-0.010 8 16 60 2 G2CS2R05080 h
80/-0.025 1.00 +/-0.010 8 16 60 2 G2CS2R10080 h
80/-0.025 1.50 +/-0.010 8 16 60 2 G2CS2R15080 h
80/-0.025 2.00 +/-0.010 8 16 60 2 G2CS2R20080 h
10 0/-0.025 0.50 +/-0.010 10 20 75 2 G2CS2R05100 h
10 0/-0.025 1.00 +/-0.010 10 20 75 2 G2CS2R10100 h
10 0/-0.025 1.50 +/-0.010 10 20 75 2 G2CS2R15100 h
10 0/-0.025 2.00 +/-0.010 10 20 75 2 G2CS2R20100 h
12 0/-0.025 0.50 +/-0.010 12 24 75 2 G2CS2R05120 h
12 0/-0.025 1.00 +/-0.010 12 24 75 2 G2CS2R10120 h
12 0/-0.025 1.50 +/-0.010 12 24 75 2 G2CS2R15120 h
12 0/-0.025 2.00 +/-0.010 12 24 75 2 G2CS2R20120 h
G2CS2R
cylindrical shank, 2 flutes, corner radius
OSAWA
NORM
<45
HRC
PMKNSH
+,+,
+ 1st choice , suitable
SLOTTING
SIDE MILLING
DRILLING
CR
CR
G2 - General purpose - Corner radius
350
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
CUTTING PARAMETERS
G2CS2R
SLOTTING
Material Group
ISO 513 P1 P2 K1 P3 P4 M1 M2 K2 P5 M3 K3 N1 N2 N3 N4
Hardness/Rm < 700 N/mm² 700-1000 N/mm² < 40 HRC
ap x ae 0.5D x D 0.5D x D 0.5D x D 0.5D x D
Vc (m/min) 80-100 50-70 30-50 100-120
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
128660 0.004 230 19110 0.003 130 12740 0.003 80 35030 0.005 360
214330 0.008 230 9550 0.007 130 6370 0.006 80 17520 0.010 360
39550 0.012 230 6370 0.010 130 4250 0.009 80 11680 0.016 360
47170 0.016 230 4780 0.014 130 3180 0.012 80 8760 0.021 360
55730 0.020 230 3820 0.017 130 2550 0.015 80 7010 0.026 360
64780 0.025 240 3180 0.021 140 2120 0.019 80 5840 0.033 380
83580 0.032 230 2390 0.027 130 1590 0.024 80 4380 0.042 360
10 2870 0.038 220 1910 0.032 120 1270 0.029 70 3500 0.049 350
12 2390 0.045 220 1590 0.038 120 1060 0.034 70 2920 0.059 340
< D3 mm: ap = 0.2D
SIDE MILLING
Material Group
ISO 513 P1 P2 K1 P3 P4 M1 M2 K2 P5 M3 K3 N1 N2 N3 N4
Hardness/Rm < 700 N/mm² 700-1000 N/mm² < 40 HRC
ap x ae 1.5D x 0.5D 1.5D x 0.5D 1.5D x 0.5D 1.5D x 0.5D
Vc (m/min) 80-100 50-70 30-50 100-120
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
128660 0.005 280 19110 0.004 160 12740 0.004 90 35030 0.006 440
214330 0.010 280 9550 0.008 160 6370 0.007 90 17520 0.012 440
39550 0.014 280 6370 0.012 160 4250 0.011 90 11680 0.019 440
47170 0.019 280 4780 0.016 160 3180 0.014 90 8760 0.025 440
55730 0.024 280 3820 0.020 160 2550 0.018 90 7010 0.031 440
64780 0.030 290 3180 0.026 160 2120 0.023 100 5840 0.039 460
83580 0.038 270 2390 0.033 160 1590 0.029 90 4380 0.050 440
10 2870 0.046 260 1910 0.039 150 1270 0.034 90 3500 0.059 410
12 2390 0.054 260 1590 0.046 150 1060 0.041 90 2920 0.070 410
< D3 mm: ae = 0.2D
DRILLING
Material Group
ISO 513 P1 P2 K1 P3 P4 M1 M2 K2 P5 M3 K3 N1 N2 N3 N4
Hardness/Rm < 700 N/mm² 700-1000 N/mm² < 40 HRC
ap x ae D x D D x D 0.5D x D D x D
Vc (m/min) 70-90 40-60 25-35 80-100
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
125480 0.002 120 15920 0.002 60 9550 0.002 30 28660 0.003 180
212740 0.005 120 7960 0.004 60 4780 0.004 30 14330 0.006 180
38490 0.007 120 5310 0.006 60 3180 0.005 30 9550 0.009 180
46370 0.010 120 3980 0.008 60 2390 0.007 30 7170 0.012 180
55100 0.012 120 3180 0.010 60 1910 0.009 30 5730 0.016 180
64250 0.015 130 2650 0.013 70 1590 0.011 40 4780 0.020 190
83180 0.019 120 1990 0.016 60 1190 0.014 30 3580 0.025 180
10 2550 0.023 120 1590 0.019 60 960 0.017 30 2870 0.030 170
12 2120 0.027 110 1330 0.023 60 800 0.020 30 2390 0.035 170
< D3 mm: ap = 0.5D
G2 - General purpose - Corner radius
351
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
h stock standard f non-standard stock m stock exhaustion
D D Tol. CR CR Tol. d(h6) l l1 L z EDP No. Stock
10/-0.020 0.20 +/-0.010 4 2 50 4 G2CS4R02010 h
1.5 0/-0.020 0.20 +/-0.010 4 3 50 4 G2CS4R02015 h
1.5 0/-0.020 0.50 +/-0.010 4 3 50 4 G2CS4R05015 h
20/-0.020 0.20 +/-0.010 4 4 50 4 G2CS4R02020 h
20/-0.020 0.50 +/-0.010 4 4 50 4 G2CS4R05020 h
2.5 0/-0.020 0.20 +/-0.010 4 5 50 4 G2CS4R02025 h
2.5 0/-0.020 0.50 +/-0.010 4 5 50 4 G2CS4R05025 h
30/-0.020 0.20 +/-0.010 4 6 50 4 G2CS4R02030 h
30/-0.020 0.50 +/-0.010 4 6 50 4 G2CS4R05030 h
30/-0.020 1.00 +/-0.010 4 6 50 4 G2CS4R10030 h
40/-0.020 0.20 +/-0.010 4 8 50 4 G2CS4R02040 h
40/-0.020 0.50 +/-0.010 4 8 50 4 G2CS4R05040 h
40/-0.020 1.00 +/-0.010 4 8 50 4 G2CS4R10040 h
50/-0.020 0.50 +/-0.010 6 10 50 4 G2CS4R05050 h
50/-0.020 1.00 +/-0.010 6 10 50 4 G2CS4R10050 h
60/-0.020 0.20 +/-0.010 6 12 50 4 G2CS4R02060 h
60/-0.020 0.50 +/-0.010 6 12 50 4 G2CS4R05060 h
60/-0.020 1.00 +/-0.010 6 12 50 4 G2CS4R10060 h
60/-0.020 1.50 +/-0.010 6 12 50 4 G2CS4R15060 h
60/-0.020 2.00 +/-0.010 6 12 50 4 G2CS4R20060 h
80/-0.025 0.50 +/-0.010 8 16 60 4 G2CS4R05080 h
80/-0.025 1.00 +/-0.010 8 16 60 4 G2CS4R10080 h
80/-0.025 1.50 +/-0.010 8 16 60 4 G2CS4R15080 h
80/-0.025 2.00 +/-0.010 8 16 60 4 G2CS4R20080 h
10 0/-0.025 0.50 +/-0.010 10 20 75 4 G2CS4R05100 h
10 0/-0.025 1.00 +/-0.010 10 20 75 4 G2CS4R10100 h
10 0/-0.025 1.50 +/-0.010 10 20 75 4 G2CS4R15100 h
10 0/-0.025 2.00 +/-0.010 10 20 75 4 G2CS4R20100 h
10 0/-0.025 2.50 +/-0.010 10 20 75 4 G2CS4R25100 h
10 0/-0.025 3.00 +/-0.010 10 20 75 4 G2CS4R30100 h
12 0/-0.025 0.50 +/-0.010 12 24 75 4 G2CS4R05120 h
12 0/-0.025 1.00 +/-0.010 12 24 75 4 G2CS4R10120 h
12 0/-0.025 1.50 +/-0.010 12 24 75 4 G2CS4R15120 h
12 0/-0.025 2.00 +/-0.010 12 24 75 4 G2CS4R20120 h
12 0/-0.025 2.50 +/-0.010 12 24 75 4 G2CS4R25120 h
12 0/-0.025 3.00 +/-0.010 12 24 75 4 G2CS4R30120 h
G2CS4R
cylindrical shank, 4 flutes, corner radius
OSAWA
NORM
<45
HRC
PMKNSH
+,+,
+ 1st choice , suitable
SIDE MILLING
CR
CR
G2 - General purpose - Corner radius
352
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
CUTTING PARAMETERS
G2CS4R
SIDE MILLING
Material Group
ISO 513 P1 P2 K1 P3 P4 M1 M2 K2 P5 M3 K3 N1 N2 N3 N4
Hardness/Rm < 700 N/mm² 700-1000 N/mm² < 40 HRC
ap x ae 1.5D x 0.2D 1.5D x 0.2D 1.5D x 0.2D 1.5D x 0.2D
Vc (m/min) 80-100 50-70 30-50 100-120
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
128660 0.004 400 19110 0.003 230 12740 0.003 130 35030 0.005 640
214330 0.007 400 9550 0.006 230 6370 0.005 130 17520 0.009 640
39550 0.010 380 6370 0.009 220 4250 0.008 130 11680 0.013 610
47170 0.013 370 4780 0.011 210 3180 0.010 120 8760 0.017 590
55730 0.016 370 3820 0.014 210 2550 0.012 120 7010 0.021 580
64780 0.019 360 3180 0.016 210 2120 0.014 120 5840 0.025 580
83580 0.025 360 2390 0.021 200 1590 0.019 120 4380 0.033 570
10 2870 0.032 370 1910 0.027 210 1270 0.024 120 3500 0.042 580
12 2390 0.040 380 1590 0.034 220 1060 0.030 130 2920 0.052 610
< D3 mm: ae = 0.1D
G2 - General purpose - Corner radius
353
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
h stock standard f non-standard stock m stock exhaustion
D D Tol. CR CR Tol. d(h6) l l1 L z EDP No. Stock
20/-0.030 0.20 +/-0.010 4 4 75 4 G2CL4R02020 h
20/-0.030 0.50 +/-0.010 4 4 75 4 G2CL4R05020 h
30/-0.030 0.20 +/-0.010 4 6 75 4 G2CL4R02030 h
30/-0.030 0.50 +/-0.010 4 6 75 4 G2CL4R05030 h
30/-0.030 1.00 +/-0.010 4 6 75 4 G2CL4R10030 h
40/-0.030 0.20 +/-0.010 4 8 75 4 G2CL4R02040 h
40/-0.030 0.50 +/-0.010 4 8 75 4 G2CL4R05040 h
40/-0.030 1.00 +/-0.010 4 8 75 4 G2CL4R10040 h
50/-0.030 0.50 +/-0.010 6 10 75 4 G2CL4R05050 h
50/-0.030 1.00 +/-0.010 6 10 75 4 G2CL4R10050 h
60/-0.030 0.50 +/-0.010 6 12 75 4 G2CL4R05060 h
60/-0.030 1.00 +/-0.010 6 12 75 4 G2CL4R10060 h
80/-0.035 0.50 +/-0.010 8 16 100 4 G2CL4R05080 h
80/-0.035 1.00 +/-0.010 8 16 100 4 G2CL4R10080 h
80/-0.035 2.00 +/-0.010 8 16 100 4 G2CL4R20080 h
10 0/-0.035 0.50 +/-0.010 10 20 100 4 G2CL4R05100 h
10 0/-0.035 1.00 +/-0.010 10 20 100 4 G2CL4R10100 h
10 0/-0.035 2.00 +/-0.010 10 20 100 4 G2CL4R20100 h
12 0/-0.035 0.50 +/-0.010 12 24 100 4 G2CL4R05120 h
12 0/-0.035 1.00 +/-0.010 12 24 100 4 G2CL4R10120 h
12 0/-0.035 2.00 +/-0.010 12 24 100 4 G2CL4R20120 h
G2CL4R
cylindrical shank, 4 flutes, long, corner radius
OSAWA
NORM
<45
HRC
PMKNSH
+,+,
+ 1st choice , suitable
SIDE MILLING
CR
CR
G2 - General purpose - Corner radius
354
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
CUTTING PARAMETERS
G2CL4R
SIDE MILLING
Material Group
ISO 513 P1 P2 K1 P3 P4 M1 M2 K2 P5 M3 K3 N1 N2 N3 N4
Hardness/Rm < 700 N/mm² 700-1000 N/mm² < 40 HRC
ap x ae 1.5D x 0.2D 1.5D x 0.2D 1.5D x 0.2D 1.5D x 0.2D
Vc (m/min) 55-75 40-60 20-40 70-90
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
210350 0.006 250 7960 0.005 160 4780 0.005 90 12740 0.007 340
36900 0.009 250 5310 0.008 160 3180 0.007 90 8490 0.010 340
45180 0.012 250 3980 0.010 160 2390 0.009 90 6370 0.013 340
54140 0.015 250 3180 0.013 160 1910 0.011 90 5100 0.017 340
63450 0.017 230 2650 0.014 150 1590 0.013 80 4250 0.019 320
82590 0.023 240 1990 0.020 160 1190 0.017 80 3180 0.030 380
10 2070 0.029 240 1590 0.025 160 960 0.022 80 2550 0.038 380
12 1730 0.036 250 1330 0.031 160 800 0.027 90 2120 0.047 400
< D3 mm: ae = 0.1D
G2 - General purpose - Ball nose
355
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
h stock standard f non-standard stock m stock exhaustion
D D Tol. R R Tol. d(h6) l l1 L z EDP No. Stock
10/-0.020 0.50 +/-0.015 4 2 50 2 GB255010 h
1.5 0/-0.020 0.75 +/-0.015 4 3 50 2 GB255015 h
20/-0.020 1.00 +/-0.015 4 4 50 2 GB255020 h
30/-0.020 1.50 +/-0.015 4 6 50 2 GB255030 h
40/-0.020 2.00 +/-0.015 4 8 50 2 GB255040 h
50/-0.020 2.50 +/-0.015 6 10 50 2 GB255050 h
60/-0.020 3.00 +/-0.015 6 12 50 2 GB255060 h
80/-0.025 4.00 +/-0.015 8 16 60 2 GB255080 h
10 0/-0.025 5.00 +/-0.015 10 20 75 2 GB255100 h
12 0/-0.025 6.00 +/-0.015 12 24 75 2 GB255120 h
GB255
cylindrical shank, 2 flutes ball nose
OSAWA
NORM
<45
HRC
PMKNSH
+,+,
+ 1st choice , suitable
COPYING
R
G2 - General purpose - Ball nose
356
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
CUTTING PARAMETERS
GB255
COPYING
Material Group
ISO 513 P1 K1 P2 M1 K2 P3 M2 N1 N2 N3 N4
Hardness/Rm < 700 N/mm² 700-1000 N/mm² < 40 HRC
ap x ae 0.1D x 0.1D 0.1D x 0.1D 0.1D x 0.1D 0.1D x 0.1D
Vc (m/min) 50-70 35-55 20-40 80-120
D
(mm)
D (e.)
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
1 0.60 19110 0.030 1150 14330 0.023 640 9550 0.021 400 31850 0.036 2290
2 1.20 9550 0.040 760 7170 0.030 430 4780 0.028 270 15920 0.048 1530
3 1.80 6370 0.050 640 4780 0.038 360 3180 0.035 220 10620 0.060 1270
4 2.40 4780 0.060 570 3580 0.045 320 2390 0.042 200 7960 0.072 1150
5 3.00 3820 0.070 530 2870 0.053 300 1910 0.049 190 6370 0.084 1070
6 3.60 3180 0.080 510 2390 0.060 290 1590 0.056 180 5310 0.096 1020
8 4.80 2390 0.090 430 1790 0.068 240 1190 0.063 150 3980 0.108 860
10 6.00 1910 0.105 400 1430 0.079 230 960 0.074 140 3180 0.126 800
12 7.20 1590 0.120 380 1190 0.090 210 800 0.084 130 2650 0.144 760
G2 - General purpose - Ball nose
357
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
h stock standard f non-standard stock m stock exhaustion
D D Tol. R R Tol. d(h6) l l1 L z EDP No. Stock
10/-0.020 0.50 +/-0.015 4 2 50 2 G2CSB2010 h
1.5 0/-0.020 0.75 +/-0.015 4 3 50 2 G2CSB2015 h
20/-0.020 1.00 +/-0.015 4 4 50 2 G2CSB2020 h
2.5 0/-0.020 1.25 +/-0.015 4 5 50 2 G2CSB2025 h
30/-0.020 1.50 +/-0.015 4 6 50 2 G2CSB2030 h
3.5 0/-0.020 1.75 +/-0.015 4 7 50 2 G2CSB2035 h
40/-0.020 2.00 +/-0.015 4 8 50 2 G2CSB2040 h
4.5 0/-0.020 2.25 +/-0.015 6 9 50 2 G2CSB2045 h
50/-0.020 2.50 +/-0.015 6 10 50 2 G2CSB2050 h
5.5 0/-0.020 2.75 +/-0.015 6 11 50 2 G2CSB2055 h
60/-0.020 3.00 +/-0.015 6 12 50 2 G2CSB2060 h
6.5 0/-0.025 3.25 +/-0.015 8 13 60 2 G2CSB2065 h
70/-0.025 3.50 +/-0.015 8 14 60 2 G2CSB2070 h
80/-0.025 4.00 +/-0.015 8 16 60 2 G2CSB2080 h
90/-0.025 4.50 +/-0.015 10 18 75 2 G2CSB2090 h
10 0/-0.025 5.00 +/-0.015 10 20 75 2 G2CSB2100 h
12 0/-0.025 6.00 +/-0.015 12 24 75 2 G2CSB2120 h
16 0/-0.030 8.00 +/-0.015 16 30 92 2 G2CSB2160 h
20 0/-0.030 10.00 +/-0.015 20 30 100 2 G2CSB2200 h
G2CSB2
cylindrical shank, 2 flutes ball nose
OSAWA
NORM
<45
HRC
PMKNSH
+,+,
+ 1st choice , suitable
COPYING
R
G2 - General purpose - Ball nose
358
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
CUTTING PARAMETERS
G2CSB2
COPYING
Material Group
ISO 513 P1 P2 K1 P3 P4 M1 M2 K2 P5 M3 K3 N1 N2 N3 N4
Hardness/Rm < 700 N/mm² 700-1000 N/mm² < 40 HRC
ap x ae 0.1D x 0.1D 0.1D x 0.1D 0.1D x 0.1D 0.1D x 0.1D
Vc (m/min) 80-100 60-80 40-60 110-130
D
(mm)
D (e.)
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
1 0.60 28660 0.030 1720 22290 0.023 1000 15920 0.021 670 38220 0.036 2750
2 1.20 14330 0.040 1150 11150 0.030 670 7960 0.028 450 19110 0.048 1830
3 1.80 9550 0.050 960 7430 0.038 560 5310 0.035 370 12740 0.060 1530
4 2.40 7170 0.060 860 5570 0.045 500 3980 0.042 330 9550 0.072 1380
5 3.00 5730 0.070 800 4460 0.053 470 3180 0.049 310 7640 0.084 1280
6 3.60 4780 0.080 760 3720 0.060 450 2650 0.056 300 6370 0.096 1220
8 4.80 3580 0.090 640 2790 0.068 380 1990 0.063 250 4780 0.108 1030
10 6.00 2870 0.105 600 2230 0.079 350 1590 0.074 230 3820 0.126 960
12 7.20 2390 0.120 570 1860 0.090 330 1330 0.084 220 3180 0.144 920
16 9.60 1790 0.150 540 1390 0.113 310 1000 0.105 210 2390 0.180 860
20 12.00 1430 0.180 510 1110 0.135 300 800 0.126 200 1910 0.216 830
G2 - General purpose - Ball nose
359
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
h stock standard f non-standard stock m stock exhaustion
D D Tol. R R Tol. d(h6) l l1 L z EDP No. Stock
10/-0.025 0.50 +/-0.015 4 2 75 2 G2250010 h
1.5 0/-0.025 0.75 +/-0.015 4 3 75 2 G2250015 h
20/-0.025 1.00 +/-0.015 4 4 75 2 G2250020 h
30/-0.025 1.50 +/-0.015 4 6 75 2 G2250030 h
40/-0.025 2.00 +/-0.015 4 8 75 2 G2250040 h
50/-0.025 2.50 +/-0.015 6 10 75 2 G2250050 h
60/-0.025 3.00 +/-0.015 6 12 100 2 G2250060 h
80/-0.030 4.00 +/-0.015 8 16 100 2 G2250080 h
10 0/-0.030 5.00 +/-0.015 10 20 100 2 G2250100 h
12 0/-0.030 6.00 +/-0.015 12 24 100 2 G2250120 h
60/-0.025 3.00 +/-0.015 6 12 150 2 G2251060 h
80/-0.030 4.00 +/-0.015 8 16 150 2 G2251080 h
10 0/-0.030 5.00 +/-0.015 10 20 150 2 G2251100 h
12 0/-0.030 6.00 +/-0.015 12 24 150 2 G2251120 h
16 0/-0.035 8.00 +/-0.015 16 30 150 2 G2251160 h
20 0/-0.035 10.00 +/-0.015 20 30 150 2 G2251200 h
G2250-51
cylindrical shank, 2 flutes ball nose, long
OSAWA
NORM
<45
HRC
G2250
G2251
PMKNSH
+,+,
+ 1st choice , suitable
COPYING
R
G2 - General purpose - Ball nose
360
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
CUTTING PARAMETERS
G2250
COPYING
Material Group
ISO 513 P1 P2 K1 P3 P4 M1 M2 K2 P5 M3 K3 N1 N2 N3 N4
Hardness/Rm < 700 N/mm² 700-1000 N/mm² < 40 HRC
ap x ae 0.1D x 0.1D 0.1D x 0.1D 0.1D x 0.1D 0.1D x 0.1D
Vc (m/min) 70-90 50-70 40-50 100-120
D
(mm)
D (e.)
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
1 0.60 25480 0.027 1380 19110 0.020 770 14330 0.019 540 35030 0.032 2270
2 1.20 12740 0.036 920 9550 0.027 520 7170 0.025 360 17520 0.043 1510
3 1.80 8490 0.045 760 6370 0.034 430 4780 0.032 300 11680 0.054 1260
4 2.40 6370 0.054 690 4780 0.041 390 3580 0.038 270 8760 0.065 1140
5 3.00 5100 0.063 640 3820 0.047 360 2870 0.044 250 7010 0.076 1060
6 3.60 4250 0.072 610 3180 0.054 340 2390 0.050 240 5840 0.086 1010
8 4.80 3180 0.081 520 2390 0.061 290 1790 0.057 200 4380 0.097 850
10 6.00 2550 0.095 480 1910 0.071 270 1430 0.066 190 3500 0.113 790
12 7.20 2120 0.108 460 1590 0.081 260 1190 0.076 180 2920 0.130 760
G2251
COPYING
Material Group
ISO 513 P1 P2 K1 P3 P4 M1 M2 K2 P5 M3 K3 N1 N2 N3 N4
Hardness/Rm < 700 N/mm² 700-1000 N/mm² < 40 HRC
ap x ae 0.1D x 0.1D 0.1D x 0.1D 0.1D x 0.1D 0.1D x 0.1D
Vc (m/min) 60-80 40-60 35-45 90-110
D
(mm)
D (e.)
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
6 3.60 3720 0.058 430 2650 0.044 230 2120 0.041 170 5310 0.070 740
8 4.80 2790 0.066 370 1990 0.049 200 1590 0.046 150 3980 0.079 630
10 6.00 2230 0.077 340 1590 0.057 180 1270 0.054 140 3180 0.092 580
12 7.20 1860 0.087 330 1330 0.066 170 1060 0.061 130 2650 0.105 560
16 9.60 1390 0.122 340 1000 0.092 180 800 0.085 140 1990 0.146 580
20 12.00 1110 0.146 320 800 0.110 180 640 0.102 130 1590 0.175 560
G2 - General purpose - Ball nose
361
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
h stock standard f non-standard stock m stock exhaustion
D D Tol. R R Tol. d(h6) l l1 L z EDP No. Stock
10/-0.020 0.50 +/-0.015 4 2 50 2 G2CSB4010 h
1.5 0/-0.020 0.75 +/-0.015 4 3 50 2 G2CSB4015 h
20/-0.020 1.00 +/-0.015 4 4 50 2 G2CSB4020 h
30/-0.020 1.50 +/-0.015 4 6 50 2 G2CSB4030 h
40/-0.020 2.00 +/-0.015 4 8 50 2 G2CSB4040 h
50/-0.020 2.50 +/-0.015 6 10 50 2 G2CSB4050 h
60/-0.020 3.00 +/-0.015 6 12 50 2 G2CSB4060 h
80/-0.025 4.00 +/-0.015 8 16 60 2 G2CSB4080 h
10 0/-0.025 5.00 +/-0.015 10 20 75 2 G2CSB4100 h
12 0/-0.025 6.00 +/-0.015 12 24 75 2 G2CSB4120 h
16 0/-0.030 8.00 +/-0.015 16 30 92 2 G2CSB4160 h
20 0/-0.030 10.00 +/-0.015 20 30 100 2 G2CSB4200 h
G2CSB4
cylindrical shank, 4 flutes ball nose
OSAWA
NORM
<45
HRC
PMKNSH
+,+,
+ 1st choice , suitable
COPYING
R
G2 - General purpose - Ball nose
362
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
MDTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
CUTTING PARAMETERS
G2CSB4
COPYING
Material Group
ISO 513 P1 P2 K1 P3 P4 M1 M2 K2 P5 M3 K3 N1 N2 N3 N4
Hardness/Rm < 700 N/mm² 700-1000 N/mm² < 40 HRC
ap x ae 0.1D x 0.3D 0.1D x 0.3D 0.1D x 0.3D 0.1D x 0.3D
Vc (m/min) 80-100 60-80 40-60 110-130
D
(mm)
D (e.)
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
1 0.60 28660 0.030 3440 22290 0.023 2010 15920 0.021 1340 38220 0.036 5500
2 1.20 14330 0.040 2290 11150 0.030 1340 7960 0.028 890 19110 0.048 3670
3 1.80 9550 0.050 1910 7430 0.038 1110 5310 0.035 740 12740 0.060 3060
4 2.40 7170 0.060 1720 5570 0.045 1000 3980 0.042 670 9550 0.072 2750
5 3.00 5730 0.070 1600 4460 0.053 940 3180 0.049 620 7640 0.084 2570
6 3.60 4780 0.080 1530 3720 0.060 890 2650 0.056 590 6370 0.096 2450
8 4.80 3580 0.090 1290 2790 0.068 750 1990 0.063 500 4780 0.108 2060
10 6.00 2870 0.105 1210 2230 0.079 700 1590 0.074 470 3820 0.126 1930
12 7.20 2390 0.120 1150 1860 0.090 670 1330 0.084 450 3180 0.144 1830
16 9.60 1790 0.150 1070 1390 0.113 630 1000 0.105 420 2390 0.180 1720
20 12.00 1430 0.180 1030 1110 0.135 600 800 0.126 400 1910 0.216 1650
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MDTA
GENERAL PURPOSE
MDTA is the Osawa range of micrograin carbide end mills
with PV200 coating. MDTA endmills have been developed
for general purpose milling up to 45 HRC. The exclusive
and innovative PV200 coating (3500HV) ensures the best
performance, even in applications with air blow or MQL
(Minimum Quantity Lubrication).
MDTA sono le frese Osawa in metallo duro micrograna con
rivestimento PV200 sviluppate per la fresatura di materiali
generici sino a 45 HRC. L’esclusivo e innovativo rivestimento
PV200 (3500HV) garantisce performance elevate anche in
lavorazioni con impiego di refrigerazione con getto d’aria o
MQL (Minimum Quantity Lubrication).
MDTA sind Fräser von Osawa aus Mikrokörnungs-Hartmetall
mit Beschichtung PV200, die für das Fräsen von allgemeinen
Materialien bis zu 45 HRC entwickelt wurden. Die exklusive und
innovative Beschichtung PV200 (3500HV) gewährleistet auch
bei Bearbeitungen mit Kühlung durch Luftstrahl oder MQL
(Minimum Quantity Lubrication) hohe Leistungen.
MDTA sont les fraises Osawa en carbure micrograin avec
revêtement PV200 développées pour le fraisage de matériaux
génériques jusqu’à 45 HRC. Le revêtement PV200 (3500HV)
exclusif et innovant garantit des performances élevées même
pour les usinages employant un système de lubrification avec
jet d’air ou MQL (Minimum Quantity Lubrication).
MDTA son las fresas Osawa de metal duro micrograno
con revestimiento PV200 desarrolladas para el fresado de
materiales genéricos hasta 45 HRC. Su exclusivo e innovador
revestimiento PV200 (3500HV) garantiza rendimientos
elevados incluso en elaboraciones con el uso de refrigeración
con chorro de aire o MQL (Minimum Quantity Lubrication).
MDTA - это фрезы фирмы Osawa из твёрдого сплава
с мелкозернистой структурой и покрытием PV200,
предназначенные для стандартной обработки материалов
с твёрдостью до 45 HRC. Эксклюзивное и инновационное
покрытие PV200 (3500HV) гарантирует высокую
производительность, даже, при обработке с обдувом
воздухом или с масляным туманом.
MDTA - General purpose - Square
364
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
h stock standard f non-standard stock m stock exhaustion
D D Tol. C C Tol. d(h6) l l1 L z EDP No. Stock
10/-0.020 3 3 40 2 MDTACS2010403 h
10/-0.020 4 3 40 2 MDTACS2010404 h
1.5 0/-0.020 3 4.5 40 2 MDTACS2015403 h
1.5 0/-0.020 4 4.5 40 2 MDTACS2015404 h
20/-0.030 2 8 32 2 MDTACS2020 h
20/-0.020 3 6.5 40 2 MDTACS2020403 h
20/-0.020 4 6.5 40 2 MDTACS2020404 h
2.5 0/-0.020 3 6.5 40 2 MDTACS2025403 h
2.5 0/-0.020 4 6.5 40 2 MDTACS2025404 h
30/-0.025 3 9 40 2 MDTACS2030403 h
40/-0.025 4 12 50 2 MDTACS2040504 h
50/-0.025 6 15 50 2 MDTACS2050506 h
60/-0.025 6 16 50 2 MDTACS2060 h
80/-0.030 8 20 64 2 MDTACS208064 h
10 0/-0.030 10 22 70 2 MDTACS2100 h
12 0/-0.030 12 25 75 2 MDTACS212075 h
14 0/-0.030 14 25 75 2 MDTACS2140 h
16 0/-0.030 16 32 90 2 MDTACS216090 h
20 0/-0.030 20 38 100 2 MDTACS220038 h
MDTACS2
cylindrical shank, 2 flutes
OSAWA
NORM
<45
HRC
PMKNSH
+,+,
+ 1st choice , suitable
SLOTTING
SIDE MILLING
DRILLING
MDTA - General purpose - Square
365
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
CUTTING PARAMETERS
MDTACS2
SLOTTING
Material Group
ISO 513 P1 P2 K1 P3 P4 M1 M2 K2 P5 M3 K3 N1 N2 N3 N4
Hardness/Rm < 700 N/mm² 700-1000 N/mm² < 40 HRC
ap x ae 0.5D x D 0.5D x D 0.5D x D 0.5D x D
Vc (m/min) 80-100 50-70 30-50 100-120
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
128660 0.004 230 19110 0.003 130 12740 0.003 80 35030 0.005 360
214330 0.008 230 9550 0.007 130 6370 0.006 80 17520 0.010 360
39550 0.012 230 6370 0.010 130 4250 0.009 80 11680 0.016 360
47170 0.016 230 4780 0.014 130 3180 0.012 80 8760 0.021 360
55730 0.020 230 3820 0.017 130 2550 0.015 80 7010 0.026 360
64780 0.025 240 3180 0.021 140 2120 0.019 80 5840 0.033 380
83580 0.032 230 2390 0.027 130 1590 0.024 80 4380 0.042 360
10 2870 0.038 220 1910 0.032 120 1270 0.029 70 3500 0.049 350
12 2390 0.045 220 1590 0.038 120 1060 0.034 70 2920 0.059 340
14 2050 0.052 210 1360 0.044 120 910 0.039 70 2500 0.068 340
16 1790 0.060 210 1190 0.051 120 800 0.045 70 2190 0.078 340
18 1590 0.070 220 1060 0.060 130 710 0.053 70 1950 0.091 350
20 1430 0.080 230 960 0.068 130 640 0.060 80 1750 0.104 360
< D3 mm: ap = 0.2D
SIDE MILLING
Material Group
ISO 513 P1 P2 K1 P3 P4 M1 M2 K2 P5 M3 K3 N1 N2 N3 N4
Hardness/Rm < 700 N/mm² 700-1000 N/mm² < 40 HRC
ap x ae 1.5D x 0.5D 1.5D x 0.5D 1.5D x 0.5D 1.5D x 0.5D
Vc (m/min) 80-100 50-70 30-50 100-120
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
128660 0.005 280 19110 0.004 160 12740 0.004 90 35030 0.006 440
214330 0.010 280 9550 0.008 160 6370 0.007 90 17520 0.012 440
39550 0.014 280 6370 0.012 160 4250 0.011 90 11680 0.019 440
47170 0.019 280 4780 0.016 160 3180 0.014 90 8760 0.025 440
55730 0.024 280 3820 0.020 160 2550 0.018 90 7010 0.031 440
64780 0.030 290 3180 0.026 160 2120 0.023 100 5840 0.039 460
83580 0.038 270 2390 0.033 160 1590 0.029 90 4380 0.050 440
10 2870 0.046 260 1910 0.039 150 1270 0.034 90 3500 0.059 410
12 2390 0.054 260 1590 0.046 150 1060 0.041 90 2920 0.070 410
14 2050 0.062 260 1360 0.053 140 910 0.047 90 2500 0.081 410
16 1790 0.072 260 1190 0.061 150 800 0.054 90 2190 0.094 410
18 1590 0.084 270 1060 0.071 150 710 0.063 90 1950 0.109 430
20 1430 0.096 270 960 0.082 160 640 0.072 90 1750 0.125 440
< D3 mm: ae = 0.2D
DRILLING
Material Group
ISO 513 P1 P2 K1 P3 P4 M1 M2 K2 P5 M3 K3 N1 N2 N3 N4
Hardness/Rm < 700 N/mm² 700-1000 N/mm² < 40 HRC
ap x ae D x D D x D 0.5D x D D x D
Vc (m/min) 70-90 40-60 25-35 80-100
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
125480 0.002 120 15920 0.002 60 9550 0.002 30 28660 0.003 180
212740 0.005 120 7960 0.004 60 4780 0.004 30 14330 0.006 180
38490 0.007 120 5310 0.006 60 3180 0.005 30 9550 0.009 180
46370 0.010 120 3980 0.008 60 2390 0.007 30 7170 0.012 180
55100 0.012 120 3180 0.010 60 1910 0.009 30 5730 0.016 180
64250 0.015 130 2650 0.013 70 1590 0.011 40 4780 0.020 190
83180 0.019 120 1990 0.016 60 1190 0.014 30 3580 0.025 180
10 2550 0.023 120 1590 0.019 60 960 0.017 30 2870 0.030 170
12 2120 0.027 110 1330 0.023 60 800 0.020 30 2390 0.035 170
14 1820 0.031 110 1140 0.027 60 680 0.023 30 2050 0.041 170
16 1590 0.036 110 1000 0.031 60 600 0.027 30 1790 0.047 170
18 1420 0.042 120 880 0.036 60 530 0.032 30 1590 0.055 170
20 1270 0.048 120 800 0.041 70 480 0.036 30 1430 0.062 180
< D3 mm: ap = 0.5D
MDTA - General purpose - Square
366
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
h stock standard f non-standard stock m stock exhaustion
D D Tol. C C Tol. d(h6) l l1 L z EDP No. Stock
30/-0.030 3 20 60 2 MDTA210030 h
40/-0.030 4 20 60 2 MDTA210040 h
50/-0.030 5 25 75 2 MDTA210050 h
60/-0.030 6 30 75 2 MDTA210060 h
80/-0.030 8 30 75 2 MDTA210080 h
10 0/-0.030 10 40 100 2 MDTA210100 h
12 0/-0.030 12 45 100 2 MDTA210120 h
MDTA210
cylindrical shank, 2 flutes, long
OSAWA
NORM
<45
HRC
PMKNSH
+,+,
+ 1st choice , suitable
SLOTTING
SIDE MILLING
DRILLING
MDTA - General purpose - Square
367
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
CUTTING PARAMETERS
MDTA210
SLOTTING
Material Group
ISO 513 P1 P2 K1 P3 P4 M1 M2 K2 P5 M3 K3 N1 N2 N3 N4
Hardness/Rm < 700 N/mm² 700-1000 N/mm² < 40 HRC
ap x ae 0.5D x D 0.5D x D 0.5D x D 0.5D x D
Vc (m/min) 60-80 40-60 30-40 70-80
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
37430 0.011 160 5310 0.009 100 3720 0.008 60 8490 0.014 240
45570 0.014 160 3980 0.012 100 2790 0.011 60 6370 0.019 240
54460 0.018 160 3180 0.015 100 2230 0.014 60 5100 0.023 240
63720 0.023 170 2650 0.019 100 1860 0.017 60 4250 0.029 250
82790 0.029 160 1990 0.024 100 1390 0.022 60 3180 0.037 240
10 2230 0.034 150 1590 0.029 90 1110 0.026 60 2550 0.044 230
12 1860 0.041 150 1330 0.034 90 930 0.030 60 2120 0.053 220
SIDE MILLING
Material Group
ISO 513 P1 P2 K1 P3 P4 M1 M2 K2 P5 M3 K3 N1 N2 N3 N4
Hardness/Rm < 700 N/mm² 700-1000 N/mm² < 40 HRC
ap x ae 1.5D x 0.5D 1.5D x 0.5D 1.5D x 0.5D 1.5D x 0.5D
Vc (m/min) 60-80 40-60 30-40 70-80
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
37430 0.014 200 5310 0.011 120 3720 0.010 80 8490 0.018 300
45570 0.018 200 3980 0.015 120 2790 0.014 80 6370 0.023 300
54460 0.023 200 3180 0.019 120 2230 0.017 80 5100 0.029 300
63720 0.028 210 2650 0.024 130 1860 0.021 80 4250 0.037 310
82790 0.036 200 1990 0.031 120 1390 0.027 80 3180 0.047 300
10 2230 0.043 190 1590 0.036 120 1110 0.032 70 2550 0.056 280
12 1860 0.051 190 1330 0.043 110 930 0.038 70 2120 0.066 280
DRILLING
Material Group
ISO 513 P1 P2 K1 P3 P4 M1 M2 K2 P5 M3 K3 N1 N2 N3 N4
Hardness/Rm < 700 N/mm² 700-1000 N/mm² < 40 HRC
ap x ae D x D D x D 0.5D x D D x D
Vc (m/min) 50-70 35-45 25-35 60-80
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
36370 0.007 90 4250 0.006 50 3180 0.005 30 7430 0.009 130
44780 0.009 90 3180 0.008 50 2390 0.007 30 5570 0.012 130
53820 0.011 90 2550 0.010 50 1910 0.008 30 4460 0.015 130
63180 0.014 90 2120 0.012 50 1590 0.011 30 3720 0.018 140
82390 0.018 90 1590 0.015 50 1190 0.014 30 2790 0.023 130
10 1910 0.021 80 1270 0.018 50 960 0.016 30 2230 0.028 120
12 1590 0.025 80 1060 0.022 50 800 0.019 30 1860 0.033 120
MDTA - General purpose - Square
368
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
h stock standard f non-standard stock m stock exhaustion
D D Tol. C C Tol. d(h6) l l1 L z EDP No. Stock
30/-0.040 3 30 75 2 MDCL2030 h
40/-0.048 4 30 75 2 MDCL2040 h
50/-0.048 5 40 100 2 MDCL2050 h
60/-0.048 6 50 150 2 MDCL2060 h
80/-0.058 8 50 150 2 MDCL2080 h
10 0/-0.058 10 60 150 2 MDCL2100 h
12 0/-0.070 12 75 150 2 MDCL2120 h
MDCL2
cylindrical shank, 2 flutes, long
OSAWA
NORM
<45
HRC
PMKNSH
+,+,
+ 1st choice , suitable
SLOTTING
SIDE MILLING
MDTA - General purpose - Square
369
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
CUTTING PARAMETERS
MDCL2
SLOTTING
Material Group
ISO 513 P1 P2 K1 P3 P4 M1 M2 K2 P5 M3 K3 N1 N2 N3 N4
Hardness/Rm < 700 N/mm² 700-1000 N/mm² < 40 HRC
ap x ae 0.3D x D 0.3D x D 0.3D x D 0.3D x D
Vc (m/min) 40-50 25-35 20-30 60-80
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
34780 0.010 90 3180 0.008 50 2650 0.007 40 7430 0.011 160
43580 0.013 90 2390 0.011 50 1990 0.010 40 5570 0.014 160
52870 0.016 90 1910 0.014 50 1590 0.012 40 4460 0.018 160
62390 0.020 100 1590 0.017 50 1330 0.015 40 3720 0.022 160
81790 0.026 90 1190 0.022 50 1000 0.019 40 2790 0.033 190
10 1430 0.030 90 960 0.026 50 800 0.023 40 2230 0.040 180
12 1190 0.036 90 800 0.031 50 660 0.027 40 1860 0.047 170
SIDE MILLING
Material Group
ISO 513 P1 P2 K1 P3 P4 M1 M2 K2 P5 M3 K3 N1 N2 N3 N4
Hardness/Rm < 700 N/mm² 700-1000 N/mm² < 40 HRC
ap x ae 1.5D x 0.3D 1.5D x 0.3D 1.5D x 0.3D 1.5D x 0.3D
Vc (m/min) 45-55 30-40 25-35 70-90
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
35310 0.012 120 3720 0.010 70 3180 0.009 50 8490 0.013 220
43980 0.015 120 2790 0.013 70 2390 0.012 60 6370 0.017 220
53180 0.019 120 2230 0.016 70 1910 0.014 60 5100 0.021 220
62650 0.024 130 1860 0.020 80 1590 0.018 60 4250 0.027 230
81990 0.031 120 1390 0.026 70 1190 0.023 50 3180 0.040 250
10 1590 0.036 120 1110 0.031 70 960 0.027 50 2550 0.047 240
12 1330 0.043 110 930 0.037 70 800 0.032 50 2120 0.056 240
MDTA - General purpose - Square
370
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
h stock standard f non-standard stock m stock exhaustion
D D Tol. C C Tol. d(h6) l l1 L z EDP No. Stock
10/-0.020 3 3 40 3 MDTACS3010403 h
10/-0.020 4 3 40 3 MDTACS3010404 h
1.5 0/-0.020 3 4.5 40 3 MDTACS3015403 h
1.5 0/-0.020 4 4.5 40 3 MDTACS3015404 h
20/-0.020 3 6.5 40 3 MDTACS3020403 h
20/-0.020 4 6.5 40 3 MDTACS3020404 h
2.5 0/-0.020 3 6.5 40 3 MDTACS3025403 h
2.5 0/-0.020 4 6.5 40 3 MDTACS3025404 h
30/-0.025 3 9 40 3 MDTACS3030403 h
40/-0.025 4 12 50 3 MDTACS3040504 h
50/-0.025 6 15 50 3 MDTACS3050506 h
60/-0.025 6 16 50 3 MDTACS3060 h
80/-0.030 8 20 64 3 MDTACS308064 h
10 0/-0.030 10 22 70 3 MDTACS3100 h
12 0/-0.030 12 25 75 3 MDTACS312075 h
14 0/-0.030 14 25 75 3 MDTACS3140 h
16 0/-0.030 16 32 90 3 MDTACS316090 h
20 0/-0.030 20 38 100 3 MDTACS320038 h
MDTACS3
cylindrical shank, 3 flutes
OSAWA
NORM
<45
HRC
PMKNSH
+,+,
+ 1st choice , suitable
SLOTTING
SIDE MILLING
MDTA - General purpose - Square
371
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
CUTTING PARAMETERS
MDTACS3
SLOTTING
Material Group
ISO 513 P1 P2 K1 P3 P4 M1 M2 K2 P5 M3 K3 N1 N2 N3 N4
Hardness/Rm < 700 N/mm² 700-1000 N/mm² < 40 HRC
ap x ae 0.5D x D 0.5D x D 0.5D x D 0.5D x D
Vc (m/min) 80-100 50-70 30-50 100-120
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
128660 0.004 330 19110 0.003 190 12740 0.003 110 35030 0.005 530
214330 0.008 330 9550 0.007 190 6370 0.006 110 17520 0.010 530
39550 0.011 320 6370 0.009 180 4250 0.008 110 11680 0.014 500
47170 0.014 310 4780 0.012 170 3180 0.011 100 8760 0.019 490
55730 0.018 300 3820 0.015 170 2550 0.013 100 7010 0.023 480
64780 0.021 300 3180 0.018 170 2120 0.016 100 5840 0.027 480
83580 0.028 300 2390 0.023 170 1590 0.021 100 4380 0.036 470
10 2870 0.035 300 1910 0.030 170 1270 0.026 100 3500 0.046 480
12 2390 0.044 320 1590 0.037 180 1060 0.033 100 2920 0.057 500
14 2050 0.052 320 1360 0.044 180 910 0.039 110 2500 0.067 500
16 1790 0.059 320 1190 0.050 180 800 0.045 110 2190 0.077 510
18 1590 0.066 310 1060 0.056 180 710 0.050 110 1950 0.086 500
20 1430 0.072 310 960 0.061 180 640 0.054 100 1750 0.093 490
< D3 mm: ap = 0.2D
SIDE MILLING
Material Group
ISO 513 P1 P2 K1 P3 P4 M1 M2 K2 P5 M3 K3 N1 N2 N3 N4
Hardness/Rm < 700 N/mm² 700-1000 N/mm² < 40 HRC
ap x ae 1.5D x 0.3D 1.5D x 0.3D 1.5D x 0.3D 1.5D x 0.3D
Vc (m/min) 80-100 50-70 30-50 100-120
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
128660 0.005 400 19110 0.004 230 12740 0.003 130 35030 0.006 630
214330 0.009 400 9550 0.008 230 6370 0.007 130 17520 0.012 630
39550 0.013 380 6370 0.011 210 4250 0.010 130 11680 0.017 600
47170 0.017 370 4780 0.015 210 3180 0.013 120 8760 0.022 590
55730 0.021 360 3820 0.018 210 2550 0.016 120 7010 0.027 580
64780 0.025 360 3180 0.021 200 2120 0.019 120 5840 0.033 570
83580 0.033 350 2390 0.028 200 1590 0.025 120 4380 0.043 560
10 2870 0.042 360 1910 0.036 210 1270 0.032 120 3500 0.055 580
12 2390 0.053 380 1590 0.045 210 1060 0.040 130 2920 0.069 600
14 2050 0.062 380 1360 0.053 220 910 0.047 130 2500 0.081 600
16 1790 0.071 380 1190 0.061 220 800 0.053 130 2190 0.093 610
18 1590 0.079 380 1060 0.067 210 710 0.059 130 1950 0.103 600
20 1430 0.086 370 960 0.073 210 640 0.064 120 1750 0.112 590
< D3 mm: ae = 0.1D
MDTA - General purpose - Square
372
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
h stock standard f non-standard stock m stock exhaustion
D D Tol. C C Tol. d(h6) l l1 L z EDP No. Stock
30/-0.030 6 7 57 3 MDTAWSH3030 h
40/-0.030 6 8 57 3 MDTAWSH3040 h
50/-0.030 6 10 57 3 MDTAWSH3050 h
60/-0.030 6 10 57 3 MDTAWSH3060 h
80/-0.030 8 16 63 3 MDTAWSH3080 h
10 0/-0.030 10 19 72 3 MDTAWSH3100 h
12 0/-0.030 12 22 83 3 MDTAWSH3120 h
14 0/-0.030 14 22 83 3 MDTAWSH3140 h
16 0/-0.030 16 26 92 3 MDTAWSH3160 h
20 0/-0.030 20 32 104 3 MDTAWSH3200 h
MDTAWSH3
weldon shank, 3 flutes
OSAWA
NORM
<45
HRC
PMKNSH
+,+,
+ 1st choice , suitable
SLOTTING
SIDE MILLING
MDTA - General purpose - Square
373
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
CUTTING PARAMETERS
MDTAWSH3
SLOTTING
Material Group
ISO 513 P1 P2 K1 P3 P4 M1 M2 K2 P5 M3 K3 N1 N2 N3 N4
Hardness/Rm < 700 N/mm² 700-1000 N/mm² < 40 HRC
ap x ae 0.5D x D 0.5D x D 0.5D x D 0.5D x D
Vc (m/min) 80-100 50-70 30-50 80-120
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
39550 0.011 320 6370 0.009 180 4250 0.008 110 10620 0.014 460
47170 0.014 310 4780 0.012 170 3180 0.011 100 7960 0.019 440
55730 0.018 300 3820 0.015 170 2550 0.013 100 6370 0.023 440
64780 0.021 300 3180 0.018 170 2120 0.016 100 5310 0.027 430
83580 0.028 300 2390 0.023 170 1590 0.021 100 3980 0.036 430
10 2870 0.035 300 1910 0.030 170 1270 0.026 100 3180 0.046 440
12 2390 0.044 320 1590 0.037 180 1060 0.033 100 2650 0.057 450
14 2050 0.052 320 1360 0.044 180 910 0.039 110 2270 0.067 460
16 1790 0.059 320 1190 0.050 180 800 0.045 110 1990 0.077 460
18 1590 0.066 310 1060 0.056 180 710 0.050 110 1770 0.086 460
20 1430 0.072 310 960 0.061 180 640 0.054 100 1590 0.093 440
SIDE MILLING
Material Group
ISO 513 P1 P2 K1 P3 P4 M1 M2 K2 P5 M3 K3 N1 N2 N3 N4
Hardness/Rm < 700 N/mm² 700-1000 N/mm² < 40 HRC
ap x ae 1.5D x 0.3D 1.5D x 0.3D 1.5D x 0.3D 1.5D x 0.3D
Vc (m/min) 90-110 60-80 40-60 110-120
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
310620 0.013 420 7430 0.011 250 5310 0.010 160 12740 0.017 660
47960 0.017 410 5570 0.015 240 3980 0.013 150 9550 0.022 640
56370 0.021 400 4460 0.018 240 3180 0.016 150 7640 0.027 630
65310 0.025 400 3720 0.021 240 2650 0.019 150 6370 0.033 620
83980 0.033 390 2790 0.028 230 1990 0.025 150 4780 0.043 620
10 3180 0.042 400 2230 0.036 240 1590 0.032 150 3820 0.055 630
12 2650 0.053 420 1860 0.045 250 1330 0.040 160 3180 0.069 650
14 2270 0.062 420 1590 0.053 250 1140 0.047 160 2730 0.081 660
16 1990 0.071 430 1390 0.061 250 1000 0.053 160 2390 0.093 660
18 1770 0.079 420 1240 0.067 250 880 0.059 160 2120 0.103 650
20 1590 0.086 410 1110 0.073 240 800 0.064 150 1910 0.112 640
MDTA - General purpose - Square
374
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
h stock standard f non-standard stock m stock exhaustion
D D Tol. C C Tol. d(h6) l l1 L z EDP No. Stock
10/-0.020 3 3 40 4 MDTACS4010403 h
10/-0.020 4 3 40 4 MDTACS4010404 h
1.5 0/-0.020 3 4.5 40 4 MDTACS4015403 h
1.5 0/-0.020 4 4.5 40 4 MDTACS4015404 h
20/-0.030 2 8 32 4 MDTACS4020 h
20/-0.020 3 6.5 40 4 MDTACS4020403 h
20/-0.020 4 6.5 40 4 MDTACS4020404 h
2.5 0/-0.020 3 6.5 40 4 MDTACS4025403 h
2.5 0/-0.020 4 6.5 40 4 MDTACS4025404 h
30/-0.025 3 9 40 4 MDTACS4030403 h
40/-0.025 4 12 50 4 MDTACS4040504 h
50/-0.025 6 15 50 4 MDTACS4050506 h
60/-0.030 6 16 50 4 MDTACS4060 h
80/-0.030 8 20 64 4 MDTACS408064 h
10 0/-0.030 10 22 70 4 MDTACS4100 h
12 0/-0.030 12 25 75 4 MDTACS412075 h
14 0/-0.030 14 25 75 4 MDTACS4140 h
16 0/-0.030 16 32 90 4 MDTACS416090 h
20 0/-0.030 20 38 100 4 MDTACS420038 h
MDTACS4
cylindrical shank, 4 flutes
OSAWA
NORM
<45
HRC
PMKNSH
+,+,
+ 1st choice , suitable
SIDE MILLING
MDTA - General purpose - Square
375
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
CUTTING PARAMETERS
MDTACS4
SIDE MILLING
Material Group
ISO 513 P1 P2 K1 P3 P4 M1 M2 K2 P5 M3 K3 N1 N2 N3 N4
Hardness/Rm < 700 N/mm² 700-1000 N/mm² < 40 HRC
ap x ae 1.5D x 0.2D 1.5D x 0.2D 1.5D x 0.2D 1.5D x 0.2D
Vc (m/min) 80-100 50-70 30-50 100-120
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
128660 0.004 400 19110 0.003 230 12740 0.003 130 35030 0.005 640
214330 0.007 400 9550 0.006 230 6370 0.005 130 17520 0.009 640
39550 0.010 380 6370 0.009 220 4250 0.008 130 11680 0.013 610
47170 0.013 370 4780 0.011 210 3180 0.010 120 8760 0.017 590
55730 0.016 370 3820 0.014 210 2550 0.012 120 7010 0.021 580
64780 0.019 360 3180 0.016 210 2120 0.014 120 5840 0.025 580
83580 0.025 360 2390 0.021 200 1590 0.019 120 4380 0.033 570
10 2870 0.032 370 1910 0.027 210 1270 0.024 120 3500 0.042 580
12 2390 0.040 380 1590 0.034 220 1060 0.030 130 2920 0.052 610
14 2050 0.047 390 1360 0.040 220 910 0.035 130 2500 0.061 610
16 1790 0.054 390 1190 0.046 220 800 0.041 130 2190 0.070 610
18 1590 0.060 380 1060 0.051 220 710 0.045 130 1950 0.078 610
20 1430 0.065 370 960 0.055 210 640 0.049 120 1750 0.085 590
< D3 mm: ae = 0.1D
MDTA - General purpose - Square
376
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
h stock standard f non-standard stock m stock exhaustion
D D Tol. C C Tol. d(h6) l l1 L z EDP No. Stock
30/-0.030 3 20 60 4 MDTA410030 h
40/-0.030 4 20 60 4 MDTA410040 h
50/-0.030 5 25 75 4 MDTA410050 h
60/-0.030 6 30 75 4 MDTA410060 h
80/-0.030 8 30 75 4 MDTA410080 h
10 0/-0.030 10 40 100 4 MDTA410100 h
12 0/-0.030 12 45 100 4 MDTA410120 h
14 0/-0.030 14 45 100 4 MDTA410140 h
16 0/-0.030 16 45 100 4 MDTA410160 h
MDTA410
cylindrical shank, 4 flutes, long
OSAWA
NORM
<45
HRC
PMKNSH
+,+,
+ 1st choice , suitable
SIDE MILLING
MDTA - General purpose - Square
377
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
CUTTING PARAMETERS
MDTA410
SIDE MILLING
Material Group
ISO 513 P1 P2 K1 P3 P4 M1 M2 K2 P5 M3 K3 N1 N2 N3 N4
Hardness/Rm < 700 N/mm² 700-1000 N/mm² < 40 HRC
ap x ae 1.5D x 0.1D 1.5D x 0.1D 1.5D x 0.1D 1.5D x 0.1D
Vc (m/min) 70-90 45-65 30-50 80-120
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
38490 0.009 310 5840 0.008 180 4250 0.007 110 10620 0.012 500
46370 0.012 300 4380 0.010 170 3180 0.009 110 7960 0.015 480
55100 0.014 290 3500 0.012 170 2550 0.011 110 6370 0.019 480
64250 0.017 290 2920 0.015 170 2120 0.013 110 5310 0.022 470
83180 0.023 290 2190 0.019 170 1590 0.017 110 3980 0.029 470
10 2550 0.029 290 1750 0.024 170 1270 0.022 110 3180 0.037 480
12 2120 0.036 310 1460 0.031 180 1060 0.027 110 2650 0.047 500
14 1820 0.042 310 1250 0.036 180 910 0.032 110 2270 0.055 500
16 1590 0.048 310 1090 0.041 180 800 0.036 120 1990 0.062 500
MDTA - General purpose - Square
378
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
h stock standard f non-standard stock m stock exhaustion
D D Tol. C C Tol. d(h6) l l1 L z EDP No. Stock
30/-0.040 3 30 75 4 MDCL4030 h
40/-0.048 4 30 75 4 MDCL4040 h
50/-0.048 5 40 100 4 MDCL4050 h
60/-0.048 6 50 150 4 MDCL4060 h
80/-0.058 8 50 150 4 MDCL4080 h
10 0/-0.058 10 60 150 4 MDCL4100 h
12 0/-0.030 12 75 150 4 MDCL4120 h
14 0/-0.030 14 75 150 4 MDCL4140 h
16 0/-0.030 16 75 150 4 MDCL4160 h
20 0/-0.030 20 75 150 4 MDCL4200 h
MDCL4
cylindrical shank, 4 flutes, long
OSAWA
NORM
<45
HRC
PMKNSH
+,+,
+ 1st choice , suitable
SIDE MILLING
MDTA - General purpose - Square
379
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
CUTTING PARAMETERS
MDCL4
SIDE MILLING
Material Group
ISO 513 P1 P2 K1 P3 P4 M1 M2 K2 P5 M3 K3 N1 N2 N3 N4
Hardness/Rm < 700 N/mm² 700-1000 N/mm² < 40 HRC
ap x ae 1.5D x 0.1D 1.5D x 0.1D 1.5D x 0.1D 1.5D x 0.1D
Vc (m/min) 40-50 25-35 20-30 60-80
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
34780 0.008 150 3180 0.007 90 2650 0.006 60 7430 0.009 260
43580 0.010 150 2390 0.009 80 1990 0.008 60 5570 0.011 260
52870 0.013 150 1910 0.011 80 1590 0.010 60 4460 0.014 250
62390 0.015 150 1590 0.013 80 1330 0.011 60 3720 0.017 250
81790 0.020 140 1190 0.017 80 1000 0.015 60 2790 0.026 290
10 1430 0.026 150 960 0.022 80 800 0.019 60 2230 0.033 300
12 1190 0.032 150 800 0.027 90 660 0.024 60 1860 0.042 310
14 1020 0.038 150 680 0.032 90 570 0.028 60 1590 0.049 310
16 900 0.043 160 600 0.037 90 500 0.032 60 1390 0.056 310
20 720 0.052 150 480 0.044 80 400 0.039 60 1110 0.068 300
MDTA - General purpose - 45° chamfer
380
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
h stock standard f non-standard stock m stock exhaustion
D D Tol. C45° C45° Tol. d(h6) l l1 L z EDP No. Stock
60/-0.030 0.10 +/-0.020 6 16 57 3 MDTAUPR060 h
80/-0.030 0.20 +/-0.020 8 16 63 3 MDTAUPR080 h
10 0/-0.030 0.20 +/-0.020 10 22 72 4 MDTAUPR100 h
12 0/-0.030 0.20 +/-0.020 12 26 83 4 MDTAUPR120 h
14 0/-0.030 0.30 +/-0.020 14 26 83 4 MDTAUPR140 h
16 0/-0.030 0.30 +/-0.020 16 32 92 4 MDTAUPR160 h
20 0/-0.030 0.40 +/-0.020 20 38 104 4 MDTAUPR200 h
MDTAUPR
weldon shank, roughing HR, unequal pitch
OSAWA
NORM
<45
HRC
≤ Ø8 > Ø8
PMKNSH
+,+
+ 1st choice , suitable
SIDE MILLING
C45°
C45°
MDTA - General purpose - 45° chamfer
381
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
CUTTING PARAMETERS
MDTAUPR
SLOTTING
Material Group
ISO 513 P1 P2 K1 P3 P4 M1 M2 K2 P5 M3 K3
Hardness/Rm < 700 N/mm² 700-1000 N/mm² < 40 HRC
ap x ae 0.5D x D 0.5D x D 0.5D x D
Vc (m/min) 80-100 50-70 30-50
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
64780 0.030 430 3180 0.026 240 2120 0.023 140
83580 0.045 480 2390 0.038 270 1590 0.034 160
10 2870 0.055 630 1910 0.047 360 1270 0.041 210
12 2390 0.065 620 1590 0.055 350 1060 0.049 210
14 2050 0.075 620 1360 0.064 350 910 0.056 200
16 1790 0.085 610 1190 0.072 340 800 0.064 200
20 1430 0.100 570 960 0.085 330 640 0.075 190
D6-8: Z3
D10-20: Z4
SIDE MILLING
Material Group
ISO 513 P1 P2 K1 P3 P4 M1 M2 K2 P5 M3 K3
Hardness/Rm < 700 N/mm² 700-1000 N/mm² < 40 HRC
ap x ae 1.5D x 0.3D 1.5D x 0.3D 1.5D x 0.3D
Vc (m/min) 80-100 50-70 30-50
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
64780 0.040 570 3180 0.034 320 2120 0.030 190
83580 0.055 590 2390 0.047 340 1590 0.041 200
10 2870 0.065 750 1910 0.055 420 1270 0.049 250
12 2390 0.080 760 1590 0.068 430 1060 0.060 250
14 2050 0.090 740 1360 0.077 420 910 0.068 250
16 1790 0.100 720 1190 0.085 400 800 0.075 240
20 1430 0.120 690 960 0.102 390 640 0.090 230
D6-8: Z3
D10-20: Z4
MDTA - General purpose - Ball nose
382
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
h stock standard f non-standard stock m stock exhaustion
D D Tol. R R Tol. d(h6) l l1 L z EDP No. Stock
10/-0.030 0.50 0/-0.020 3 3 40 2 MDTACSB2010 h
1.5 0/-0.030 0.75 0/-0.020 3 5 40 2 MDTACSB2015 h
20/-0.030 1.00 0/-0.020 3 7 40 2 MDTACSB2020 h
2.5 0/-0.030 1.25 0/-0.020 3 8 40 2 MDTACSB2025 h
30/-0.030 1.50 0/-0.020 3 10 40 2 MDTACSB2030 h
40/-0.030 2.00 0/-0.020 4 12 40 2 MDTACSB2040 h
50/-0.030 2.50 0/-0.020 5 14 50 2 MDTACSB2050 h
60/-0.030 3.00 0/-0.020 6 7 50 2 MDTACSB2060 h
80/-0.030 4.00 0/-0.020 8 9 60 2 MDTACSB2080 h
10 0/-0.030 5.00 0/-0.020 10 10 60 2 MDTACSB2100 h
12 0/-0.030 6.00 0/-0.020 12 14 70 2 MDTACSB2120 h
MDTACSB2
cylindrical shank, 2 flutes ball nose
OSAWA
NORM
<45
HRC
PMKNSH
+,+,
+ 1st choice , suitable
COPYING
R
MDTA - General purpose - Ball nose
383
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
CUTTING PARAMETERS
MDTACSB2
COPYING
Material Group
ISO 513 P1 P2 K1 P3 P4 M1 M2 K2 P5 M3 K3 N1 N2 N3 N4
Hardness/Rm < 700 N/mm² 700-1000 N/mm² < 40 HRC
ap x ae 0.1D x 0.1D 0.1D x 0.1D 0.1D x 0.1D 0.1D x 0.1D
Vc (m/min) 80-100 60-80 40-60 110-130
D
(mm)
D (e.)
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
1 0.60 28660 0.030 1720 22290 0.023 1000 15920 0.021 670 38220 0.036 2750
2 1.20 14330 0.040 1150 11150 0.030 670 7960 0.028 450 19110 0.048 1830
3 1.80 9550 0.050 960 7430 0.038 560 5310 0.035 370 12740 0.060 1530
4 2.40 7170 0.060 860 5570 0.045 500 3980 0.042 330 9550 0.072 1380
5 3.00 5730 0.070 800 4460 0.053 470 3180 0.049 310 7640 0.084 1280
6 3.60 4780 0.080 760 3720 0.060 450 2650 0.056 300 6370 0.096 1220
8 4.80 3580 0.090 640 2790 0.068 380 1990 0.063 250 4780 0.108 1030
10 6.00 2870 0.105 600 2230 0.079 350 1590 0.074 230 3820 0.126 960
12 7.20 2390 0.120 570 1860 0.090 330 1330 0.084 220 3180 0.144 920
MDTA - General purpose - Ball nose
384
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
h stock standard f non-standard stock m stock exhaustion
D D Tol. R R Tol. d(h6) l l1 L z EDP No. Stock
30/-0.030 1.50 0/-0.020 3 5 75 2 MDTA250030 h
40/-0.030 2.00 0/-0.020 4 8 75 2 MDTA250040 h
50/-0.030 2.50 0/-0.020 5 9 75 2 MDTA250050 h
60/-0.030 3.00 0/-0.020 6 10 100 2 MDTA250060 h
80/-0.030 4.00 0/-0.020 8 12 100 2 MDTA250080 h
10 0/-0.030 5.00 0/-0.020 10 14 100 2 MDTA250100 h
12 0/-0.030 6.00 0/-0.020 12 16 100 2 MDTA250120 h
MDTA250
cylindrical shank, 2 flutes ball nose, long
OSAWA
NORM
<45
HRC
PMKNSH
+,+,
+ 1st choice , suitable
COPYING
R
MDTA - General purpose - Ball nose
385
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
CUTTING PARAMETERS
MDTA250
COPYING
Material Group
ISO 513 P1 P2 K1 P3 P4 M1 M2 K2 P5 M3 K3 N1 N2 N3 N4
Hardness/Rm < 700 N/mm² 700-1000 N/mm² < 40 HRC
ap x ae 0.1D x 0.1D 0.1D x 0.1D 0.1D x 0.1D 0.1D x 0.1D
Vc (m/min) 70-90 50-70 40-50 100-120
D
(mm)
D (e.)
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
3 1.80 8490 0.045 760 6370 0.034 430 4780 0.032 300 11680 0.054 1260
4 2.40 6370 0.054 690 4780 0.041 390 3580 0.038 270 8760 0.065 1140
5 3.00 5100 0.063 640 3820 0.047 360 2870 0.044 250 7010 0.076 1060
6 3.60 4250 0.072 610 3180 0.054 340 2390 0.050 240 5840 0.086 1010
8 4.80 3180 0.081 520 2390 0.061 290 1790 0.057 200 4380 0.097 850
10 6.00 2550 0.095 480 1910 0.071 270 1430 0.066 190 3500 0.113 790
12 7.20 2120 0.108 460 1590 0.081 260 1190 0.076 180 2920 0.130 760
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
HF VH/UP
UNIVERSAL PURPOSE
HF EVOlution is the Osawa family of micrograin carbide
endmills for universal application with coatings and cutting
edges specifically designed for high performance machining
of all ISO materials. The HF EVOlution endmills are available
in a broad range of types, lengths and radii. They are the ideal
tools for both mass production and small batch manufacturing,
thanks to the outstanding performance delivered and the
universal applicability.
HF EVOlution è la linea Osawa di frese universali in metallo
duro micrograna con spoglie e rivestimenti specifici per la
lavorazione ad alto rendimento di tutti i materiali della scala
ISO. Le frese HF EVOlution sono disponibili in un’ampia gamma
di tipologie, lunghezze e raggi torici. Sono gli utensili ideali sia
per le superproduzioni di serie che per la produzione di piccoli
lotti, grazie all’eccellenza del rendimento e all’universalità
d’impiego.
HF EVOlution heißt die Linie der Universalfräser aus
mikrokörnigem Hartmetall von Osawa, mit Schneidekanten und
spezifischen Beschichtungen zur Hochleistungsbearbeitung
von allen Materialien der ISO-Skala. Die Fräser HF EVOlution
sind in einer reichen Auswahl an Typologien, Längen und
Torusradien erhältlich. Mit ihren ausgezeichneten Leistungen
und dem universellen Einsatz sind sie die idealen Werkzeuge,
sowohl für die Serienproduktion großer Mengen als auch für
die Herstellung kleiner Lose.
HF EVOlution est la ligne Osawa de fraises universelles en
carbure micrograin avec dépouilles et revêtements spécifiques
pour l’usinage de haute performance de tous les matériaux de
l’échelle ISO. Les fraises HF EVOlution sont disponibles dans
une large gamme, longueurs et rayons. Ce sont des outils
aussi bien pour les grandes séries que pour la production
de prototypes, grâce à leur excellence de rendement et leur
polyvalence.
HF EVOlution es la línea de fresas universales de metal duro
microgranulado con inclinación y revestimientos específicos
para el mecanizado de alto rendimiento de todos los materiales
de la escala ISO. Las fresas HF EVOlution están disponibles en
una amplia gama de tipologías, longitudes y radios tóricos. Son
las herramientas ideales tanto para las superproducciones en
serie como para la producción de pequeños lotes, gracias a la
excelencia del rendimiento y la universalidad de empleo.
HF EVOlution - это линейка универсальных фрез Osawa
из мелкозернистого твердого сплава со специальным
покрытием для высокопроизводительной обработки всех
материалов по ISO. Доступна широкая гамма фрез этой
серии, имеющих различную длину и радиусы на уголках.
Благодаря высокой эффективности и универсальности,
это идеальные инструменты как для массового, так и для
мелкосерийного производства.
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
388
HF VH/UP UNIVERSAL PURPOSE
HIGH PERFORMANCE
Thanks to the variable helix geometry VH (1)
with unequal pitch UP (2) and to the highly
sophisticated cutting edge preparation (3), the
HF EVOlution endmills enable the highest level
of performances in terms of tool life, volume of
chip removed, productivity and surface finishing.
Grâce à la géométrie à hélice variable VH
(1) à pas décalé UP (2) et à la préparation
technique de la partie coupante (3), les fraises
HF EVOlution garantissent des performances
de haut niveau en termes de durée, volume
de débit copeau, productivité et finition
superficielle.
Grazie alla geometria ad elica variabile VH (1)
con passo differenziato UP (2) e alla sofisticata
preparazione del tagliente (3), le frese HF
EVOlution garantiscono performance di alto
livello in termini di durata, volume truciolo
asportato, produttività e finitura superficiale.
Gracias a la geometría de hélice variable
VH (1) con paso diferenciado UP (2) y a la
sofisticada preparación del filo (3), las fresas
HF EVOlution garantizan rendimientos de alto
nivel en términos de duración, volumen de la
viruta extraída, productividad y acabado de la
superficie.
Dank der Geometrie mit variabler Helix
VH (1) mit ungleicher Teilung UP (2) und
der sorgfältigen Herstellung der Schneide
(3) gewährleisten die Fräser HF EVOlution
Höchstleistungen, was die Dauer, das Volumen
des abgetragenen Spans, die Produktivität und
das Oberflächenfinish betrifft.
Благодаря геометрии с переменным углом
наклона спирали VH (1) с неравномерным
шагом UP (2) и сложной формой зубьев
(3), фрезы HF EVOlution гарантируют
высокую производительность, стойкость,
объем удаляемого материала и низкую
шероховатость обработанной поверхности.
UNIVERSAL
The HF EVOlution endmills are universal
tools, both for the broad range of materials
machineable, the type of applications and for
the milling strategies applicable: slotting, side
milling, helical interpolation, ramping, vertical
milling, drilling and trochoidal milling. Just one
single HF tool enables roughing, semi-finishing
and finishing applications.
Les fraises HF EVOlution sont des outils
universels aussi bien pour tous types de
matériaux que pour tous types d’usinages et
de stratégies de fraisages applicables : fraisage
de pièces taillées dans la masse, contournage,
interpolation hélicoïdale, entrée sur rampe,
fraisage axial, perçage et fraisage trochoïdal. Un
seul outil HF permet de réaliser des usinages
d'ébauche, semi finition et finition.
Le frese HF EVOlution sono utensili universali
sia per la gamma dei materiali lavorabili che
per il tipo di lavorazione e strategia di fresatura
applicabile: fresatura dal pieno, contornatura,
interpolazione elicoidale, entrata in rampa,
fresatura assiale, foratura e fresatura trocoidale.
Un unico utensile HF permette lavorazioni di
sgrossatura, semi-sgrossatura e finitura.
Las fresas HF EVOlution son herramientas
universales tanto por su gama de materiales
trabajables como por el tipo de elaboración y
estrategia de fresado aplicable: fresado de una
sola pieza, contorneado, interpolación helicoidal,
entrada en rampa, fresado axial, perforación
y fresado trocoidal. Un sola herramienta
HF permite elaboraciones de desbastado,
semidesbastado y acabado.
Die Fräser HF EVOlution sind universelle
Werkzeuge, sowohl aufgrund der breiten
Palette bearbeitbarer Materialien als auch
dank der anwendbaren Bearbeitungsarten
und Frässtrategien: Nutfräsen, Konturfräsen,
Helixinterpolation, Rampenfräsen, Vertikalfräsen,
Bohren und trochoidales Fräsen. Ein einziges HF
Werkzeug kann zum Schruppen, Vorschlichten
und Schlichten eingesetzt werden.
Фрезы HF EVOlution являются универсальными
инструментами как для широкой гаммы
обрабатываемых материалов, так и для многих
стратегий фрезерования: фрезерование пазов,
уступов, по спирали, под углом, вдоль оси,
сверление и трохоидальное фрезерование.
С помощью одной фрезы серии HF можно
выполнять черновую, получистовую и
чистовую обработку.
(1) VH
(2) UP
(3) MARGIN
MARGIN
SLOTTING
SIDE MILLING
HELICAL RAMPING
VERTICAL DRILLING
TROCHOIDAL
ISO P
ISO M
ISO K
ISO S
ISO H
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
389
HF VH/UP UNIVERSAL PURPOSE
COMPLETE RANGE
2 families of tools with application-specific
geometries.
- HF UNI (VH+UP), designed for milling
of materials with hardness up to 40 HRC:
steel (ISO P), stainless steel (ISO M), cast
iron (ISOK) and super alloys (ISO S), such
as Inconel or Titanium. The HF UNI range
is now extended with the new HF UNI SC
“smooth cut” which reduces significantly the
cutting forces thanks to the cutting edge
geometry, becoming particularly suitable
in case of machining with less powerful
machines.
- HF HARD (UP) for steel (ISO P), stainless
steel (ISO M), cast iron (ISO K), super alloys
(ISO S), hardened steel (ISO H) milling,
withhardness up to 55 HRC.
2 familles d’outils avec des géométries
spécifiques.
- HF UNI (VH+UP), pour fraisage de
matériaux dont la dureté peut atteindre
40HRC : acier (ISO P), acier inoxydable
(ISOM), fonte (ISO K) et super alliages
(ISOS), tels que l' inconel ou titane.
La gamme HF UNI s’enrichit de la
nouvelle HF UNI SC « smooth cut » qui,
grâce à la géométrie de coupe, réduit
considérablement les efforts de coupe,
ce qui la rend particulièrement adaptée
à l’utilisation sur des machines peu
puissantes.
- HF HARD (UP), pour fraisage d’acier
(ISOP), acier inoxydable (ISO M), fonte
(ISOK) et super alliages (ISO S), acier
trempé (ISO H), dont la dureté peut
atteindre 55HRC.
2 famiglie di utensili con geometrie
specifiche.
- HF UNI (VH+UP), per fresatura di materiali
con durezza sino a 40 HRC: acciaio (ISOP),
acciaio inossidabile (ISO M), ghisa (ISOK)
esuper leghe (ISO S), quali Inconel o
titanio. La gamma HF UNI si arricchisce
della nuova HF UNI SC “smooth cut” che,
grazie allageometria del tagliente, riduce
notevolmente gli sforzi di taglio, risultando
particolarmente adatta all’utilizzo su
macchine poco potenti.
- HF HARD (UP) per fresatura di acciaio
(ISOP), acciaio inossidabile (ISO M),
ghisa (ISO K), super leghe (ISO S), acciaio
temprato (ISOH), con durezza sino a
55HRC.
2 familias de herramientas con geometrías
específicas.
- HF UNI (VH+UP), para fresado de
materiales con dureza hasta 40HRC: acero
(ISO P), acero inoxidable (ISO M), fundición
(ISO K) y súper aleaciones (ISO S), como
Inconel o titanio. La gama HF UNI se
enriquece con la nueva HF UNI SC «smooth
cut», que, gracias a la geometría del filo
cortante, reduce de forma importante
los esfuerzos de corte, resultando
especialmente adecuada para su uso en
máquinas poco potentes.
- HF HARD (UP), para fresado de acero
(ISO P), acero inoxidable (ISO M), fundición
(ISO K) y súper aleaciones (ISO S), acero
templado (ISO H), con duración de hasta
55 HRC.
2 Werkzeugfamilien mit spezifischen
Geometrien.
- HF UNI (VH+UP), zum Fräsen von
Materialien mit einer Härte bis zu 40HRC:
Stahl (ISO P), korrosionsbeständiger
Stahl (ISO M), Gusseisen (ISO K) und
Superlegierungen (ISO S) wie Inconel oder
Titan. Die Serie HF UNI wird durch den
neuen Fräser HF UNI SC „Smooth Cut“
erweitert, bei dem dank der Geometrie der
Schneide die aufzubringende Schnittkraft
wesentlich verringert werden konnte,
so dass dieser Fräser besonders für den
Einsatz auf weniger leistungsfähigen
Maschinen geeignet ist.
- HF HARD (UP) für das Fräsen von
Stahl (ISO P), korrosionsbeständigem
Stahl (ISOM), Gusseisen (ISO K),
Superlegierungen (ISO S), gehärtetem Stahl
(ISO H) mit einer Härten bis zu 55HRC.
2 семейства инструментов со
специальной геометрией.
- HF UNI (VH+UP), для фрезерования
материалов твердостью до 40HRC: сталь
(ISO P), нержавеющая сталь (ISOM),
чугун (ISO K) и жаропрочные сплавы
(ISO S), такие как инконель и титан.
К этому семейству добавлена новая
фреза HF UNI SC «smooth cut» (плавное
резание), которая, благодаря форме
зубьев, значительно сокращает усилия
резания, что делает ее пригодной для
использования на маломощных станках.
- HF HARD (UP) для фрезерования стали
(ISO P), нержавеющей стали (ISO M),
чугуна (ISO K), жаропрочных сплавов
(ISOS), закаленной стали (ISO H)
твердостью до 55HRC.
~40HRC
~40HRC
30÷55HRC
HF UNI - Variable Helix and unequal pitch - 45° chamfer
390
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
h stock standard f non-standard stock m stock exhaustion
D D Tol. C45° C45° Tol. d(h6) l l1 L z EDP No. Stock
30/-0.030 0.10 +/-0.020 6 9 57 4 HF840030 h
40/-0.025 0.10 +/-0.020 6 11 57 4 HF840040 h
50/-0.025 0.10 +/-0.020 6 13 57 4 HF840050 h
60/-0.025 0.10 +/-0.020 6 13 57 4 HF840060 h
80/-0.030 0.20 +/-0.020 8 20 64 4 HF840080 h
10 0/-0.030 0.20 +/-0.020 10 22 72 4 HF840100 h
12 0/-0.030 0.20 +/-0.020 12 26 83 4 HF840120 h
14 0/-0.030 0.30 +/-0.020 14 32 90 4 HF840140 h
16 0/-0.030 0.30 +/-0.020 16 32 92 4 HF840160 h
18 0/-0.030 0.30 +/-0.020 18 32 92 4 HF840180 h
20 0/-0.030 0.40 +/-0.020 20 38 104 4 HF840200 h
HF840
cylindrical shank, 45° chamfer
OSAWA
NORM
PMKNSH
+++ +
+ 1st choice , suitable
SLOTTING
SIDE MILLING
HELICAL RAMPING VERTICAL DRILLING
TROCHOIDAL
C45°
C45°
HF UNI - Variable Helix and unequal pitch - 45° chamfer
391
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
CUTTING PARAMETERS
HF840
SLOTTING
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
ap x ae D X D D x D 0.5D x D 0.5D x D
Vc (m/min) 130-150 80-100 60-80 30-50
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
314860 0.014 830 9550 0.013 480 7430 0.011 310 4250 0.010 170
411150 0.019 830 7170 0.017 480 5570 0.014 310 3180 0.013 160
58920 0.023 820 5730 0.021 470 4460 0.017 310 2550 0.016 160
67430 0.027 800 4780 0.024 460 3720 0.020 300 2120 0.019 160
85570 0.035 780 3580 0.032 450 2790 0.026 290 1590 0.025 160
10 4460 0.042 750 2870 0.038 430 2230 0.032 280 1270 0.029 150
12 3720 0.048 710 2390 0.043 410 1860 0.036 270 1060 0.034 140
14 3180 0.054 690 2050 0.049 400 1590 0.041 260 910 0.038 140
16 2790 0.060 670 1790 0.054 390 1390 0.045 250 800 0.042 130
18 2480 0.066 650 1590 0.059 380 1240 0.050 250 710 0.046 130
20 2230 0.073 650 1430 0.066 380 1110 0.055 240 640 0.051 130
ap x ae ≤ D5 0.5D x D 0.5D x D 0.25D x D 0.25D x D
SIDE MILLING
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
ap x ae 1.5D x 0.5D 1.5D x 0.5D 1.2D x 0.3D 1.2D x 0.3D
Vc (m/min) 160-180 100-120 70-90 40-60
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
318050 0.017 1210 11680 0.015 710 8490 0.013 460 5310 0.018 390
413540 0.022 1200 8760 0.020 700 6370 0.018 450 3980 0.024 390
510830 0.028 1200 7010 0.025 700 5100 0.022 450 3180 0.030 390
69020 0.032 1170 5840 0.029 680 4250 0.026 440 2650 0.036 380
86770 0.042 1140 4380 0.038 660 3180 0.034 430 1990 0.046 370
10 5410 0.050 1090 3500 0.045 640 2550 0.040 410 1590 0.055 350
12 4510 0.058 1040 2920 0.052 610 2120 0.046 390 1330 0.063 340
14 3870 0.065 1000 2500 0.058 580 1820 0.052 380 1140 0.071 330
16 3380 0.072 970 2190 0.065 570 1590 0.058 370 1000 0.079 320
18 3010 0.079 950 1950 0.071 560 1420 0.063 360 880 0.087 310
20 2710 0.088 950 1750 0.079 550 1270 0.070 360 800 0.096 310
ap x ae ≤ D5 1.5D x 0.25D 1.5D x 0.25D 1.2D x 0.1D 1.2D x 0.1D
HELICAL
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
_° x ae 5° x 0.4D 4° x 0.4D 3° x 0.4D 3° x 0.4D
Vc (m/min) 130-150 80-100 60-80 30-50
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
314860 0.010 605 9550 0.010 365 7430 0.008 250 4250 0.008 133
411150 0.013 600 7170 0.013 360 5570 0.011 247 3180 0.010 132
58920 0.017 600 5730 0.016 360 4460 0.014 246 2550 0.013 131
67430 0.020 585 4780 0.018 350 3720 0.016 241 2120 0.015 128
85570 0.025 570 3580 0.024 340 2790 0.021 235 1590 0.020 125
10 4460 0.031 545 2870 0.029 325 2230 0.025 225 1270 0.024 120
12 3720 0.035 520 2390 0.033 310 1860 0.029 214 1060 0.027 114
14 3180 0.039 500 2050 0.037 300 1590 0.032 206 910 0.030 110
16 2790 0.044 490 1790 0.041 290 1390 0.036 200 800 0.034 108
18 2480 0.048 475 1590 0.045 285 1240 0.040 197 710 0.037 105
20 2230 0.053 475 1430 0.050 285 1110 0.044 195 640 0.041 105
_° max ≤ D5 2° 2° 1° 1°
PARAMETERS SUGGESTED WITH HIGH POWER MILLING CHUCK AND STABLE MACHINING CONDITION
HF UNI - Variable Helix and unequal pitch - 45° chamfer
392
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
CUTTING PARAMETERS
HF840
RAMPING
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
_° x ae 15° x D 10° x D 5° x D 5° x D
Vc (m/min) 130-150 80-100 60-80 30-50
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
67430 0.022 640 4780 0.020 380 3720 0.019 281 2120 0.026 220
85570 0.028 620 3580 0.026 370 2790 0.024 273 1590 0.034 214
10 4460 0.034 600 2870 0.031 355 2230 0.029 262 1270 0.040 205
12 3720 0.038 570 2390 0.035 335 1860 0.034 250 1060 0.046 196
14 3180 0.043 550 2050 0.040 325 1590 0.038 240 910 0.052 189
16 2790 0.048 535 1790 0.044 315 1390 0.042 233 800 0.058 185
18 2480 0.053 520 1590 0.048 310 1240 0.046 229 710 0.063 180
20 2230 0.058 520 1430 0.054 305 1110 0.051 227 640 0.070 180
VERTICAL
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
ap x ae D x 0.4D D x 0.4D D x 0.25D D x 0.25D
Vc (m/min) 130-150 80-100 60-80 30-50
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
67430 0.027 800 4780 0.024 460 3720 0.020 300 2120 0.019 160
85570 0.035 780 3580 0.032 450 2790 0.026 290 1590 0.025 160
10 4460 0.042 750 2870 0.038 430 2230 0.032 280 1270 0.029 150
12 3720 0.048 710 2390 0.043 410 1860 0.036 270 1060 0.034 140
14 3180 0.054 690 2050 0.049 400 1590 0.041 260 910 0.038 140
16 2790 0.060 670 1790 0.054 390 1390 0.045 250 800 0.042 130
18 2480 0.066 650 1590 0.059 380 1240 0.050 250 710 0.046 130
20 2230 0.073 650 1430 0.066 380 1110 0.055 240 640 0.051 130
DRILLING
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
ap x ae D x D D x D 0.5D x D 0.5D x D
Vc (m/min) 100-120 60-80 45-65 590-690
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
311680 0.007 330 7430 0.006 190 5840 0.006 130 3180 0.008 100
48760 0.009 320 5570 0.008 190 4380 0.007 130 2390 0.010 100
57010 0.012 320 4460 0.010 180 3500 0.009 130 1910 0.013 100
65840 0.014 320 3720 0.012 180 2920 0.011 130 1590 0.015 90
84380 0.018 310 2790 0.016 180 2190 0.014 120 1190 0.019 90
10 3500 0.021 290 2230 0.019 170 1750 0.017 120 960 0.023 90
12 2920 0.024 280 1860 0.022 160 1460 0.019 110 800 0.026 80
14 2500 0.027 270 1590 0.024 150 1250 0.022 110 680 0.030 80
16 2190 0.030 260 1390 0.027 150 1090 0.024 100 600 0.033 80
18 1950 0.033 260 1240 0.030 150 970 0.026 100 530 0.036 80
20 1750 0.037 260 1110 0.033 150 880 0.029 100 480 0.040 80
ap x ae ≤ D5 0.5D x D 0.5D x D 0.25D x D 0.25D x D
PARAMETERS SUGGESTED WITH HIGH POWER MILLING CHUCK AND STABLE MACHINING CONDITION
HF UNI - Variable Helix and unequal pitch - 45° chamfer
393
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
CUTTING PARAMETERS
HF840
TROCHOIDAL
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
ap x ae 2D x 0.2D 2D x 0.2D 1.5D x 0.1D 1.5D x 0.1D
Vc (m/min) 190-230 130-150 100-120 50-70
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
311680 0.035 1640 7430 0.032 940 5840 0.028 650 3180 0.039 490
48760 0.046 1620 5570 0.042 930 4380 0.037 650 2390 0.051 490
57010 0.058 1610 4460 0.052 920 3500 0.046 640 1910 0.063 480
65840 0.068 1580 3720 0.061 900 2920 0.054 630 1590 0.074 470
84380 0.088 1530 2790 0.079 880 2190 0.070 610 1190 0.096 460
10 3500 0.105 1470 2230 0.095 840 1750 0.084 590 960 0.116 440
12 2920 0.120 1400 1860 0.108 800 1460 0.096 560 800 0.132 420
14 2500 0.135 1350 1590 0.122 770 1250 0.108 540 680 0.149 400
16 2190 0.150 1310 1390 0.135 750 1090 0.120 520 600 0.165 400
18 1950 0.165 1290 1240 0.149 740 970 0.132 510 530 0.182 380
20 1750 0.183 1280 1110 0.164 730 880 0.146 510 480 0.201 390
ap x ae ≤ D5 1.5D x 0.1D 1.5D x 0.1D
NOTES:
Down milling CNC programming is required.
“ae” value max 0.2xD - “T” value max 0.1xD.
The use of end mill with diameter 30-40% smaller than the width of the slot is recommended.
The cutting conditions are based on CNC programming with medium dynamic speed.
With lower CNC dynamic speed, use the same cutting conditions or reduce the cutting speed Vc.
With higher CNC dynamic speed, reduce the “T” value by approximately -30 -50% and apply the maximum available cutting speed Vc.
X (+)
Y (+) Y
R1 Cutter radius
R2 Half of slot width
T Programming width of cut
ae Actual width of cut
ae
T
R2
R1
PARAMETERS SUGGESTED WITH HIGH POWER MILLING CHUCK AND STABLE MACHINING CONDITION
HF UNI - Variable Helix and unequal pitch - 45° chamfer
394
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
h stock standard f non-standard stock m stock exhaustion
D D Tol. C45° C45° Tol. d(h6) l l1 d1 L z EDP No. Stock
30/-0.030 0.10 +/-0.020 6 9 15 2.80 57 4 HF440030 h
40/-0.030 0.10 +/-0.020 6 11 18 3.80 57 4 HF440040 h
50/-0.030 0.10 +/-0.020 6 13 19 4.80 57 4 HF440050 h
60/-0.030 0.10 +/-0.020 6 13 20 5.80 57 4 HF440060 h
80/-0.030 0.20 +/-0.020 8 20 26 7.80 64 4 HF440080 h
10 0/-0.030 0.20 +/-0.020 10 22 30 9.80 72 4 HF440100 h
12 0/-0.030 0.20 +/-0.020 12 26 36 11.80 83 4 HF440120 h
14 0/-0.030 0.20 +/-0.020 14 26 36 13.70 83 4 HF440140 h
16 0/-0.030 0.30 +/-0.020 16 32 42 15.70 92 4 HF440160 h
20 0/-0.030 0.40 +/-0.020 20 38 50 19.70 104 4 HF440200 h
HF440
cylindrical shank and reduced neck, 45° chamfer
OSAWA
NORM
PMKNSH
+++ +
+ 1st choice , suitable
SLOTTING
1.5D
SIDE MILLING
HELICAL RAMPING VERTICAL DRILLING
TROCHOIDAL
C45°
C45°
HF UNI - Variable Helix and unequal pitch - 45° chamfer
395
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
CUTTING PARAMETERS
HF440
SLOTTING
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
ap x ae D X D D x D 0.5D x D 0.5D x D
Vc (m/min) 110-130 70-90 50-70 30-50
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
312740 0.013 640 8490 0.011 390 6370 0.009 240 4250 0.009 150
49550 0.017 640 6370 0.015 380 4780 0.012 240 3180 0.012 150
57640 0.021 630 5100 0.019 380 3820 0.016 240 2550 0.014 150
66370 0.024 620 4250 0.022 370 3180 0.018 230 2120 0.017 140
84780 0.032 600 3180 0.028 360 2390 0.024 230 1590 0.022 140
10 3820 0.038 580 2550 0.034 350 1910 0.028 220 1270 0.026 130
12 3180 0.043 550 2120 0.039 330 1590 0.032 210 1060 0.030 130
14 2730 0.049 530 1820 0.044 320 1360 0.036 200 910 0.034 120
16 2390 0.054 520 1590 0.049 310 1190 0.041 190 800 0.038 120
20 1910 0.066 500 1270 0.059 300 960 0.049 190 640 0.046 120
ap x ae ≤ D5 0.5D x D 0.5D x D 0.25D x D 0.25D x D
SLOTTING
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm²
ap x ae 1.5D x D 1.5D x D
Vc (m/min) 85-105 55-75
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
83780 0.025 380 2590 0.023 230
10 3030 0.030 370 2070 0.027 230
12 2520 0.035 350 1730 0.031 220
14 2160 0.039 340 1480 0.035 210
16 1890 0.043 330 1290 0.039 200
20 1510 0.053 320 1040 0.047 200
SIDE MILLING
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
ap x ae 1.5D x 0.5D 1.5D x 0.5D 1.2D x 0.3D 1.2D x 0.3D
Vc (m/min) 130-150 90-110 60-80 40-60
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
314860 0.015 900 10620 0.014 580 7430 0.012 360 5310 0.017 350
411150 0.020 890 7960 0.018 570 5570 0.016 360 3980 0.022 350
58920 0.025 890 6370 0.022 570 4460 0.020 350 3180 0.027 350
67430 0.029 870 5310 0.026 560 3720 0.023 350 2650 0.032 340
85570 0.038 840 3980 0.034 540 2790 0.030 340 1990 0.042 330
10 4460 0.045 810 3180 0.041 520 2230 0.036 320 1590 0.050 320
12 3720 0.052 770 2650 0.047 490 1860 0.041 310 1330 0.057 300
14 3180 0.058 740 2270 0.052 480 1590 0.047 300 1140 0.064 290
16 2790 0.065 720 1990 0.058 460 1390 0.052 290 1000 0.071 290
20 2230 0.079 700 1590 0.071 450 1110 0.063 280 800 0.087 280
ap x ae ≤ D5 1.5D x 0.25D 1.5D x 0.25D 1.2D x 0.1D 1.2D x 0.1D
PARAMETERS SUGGESTED WITH HIGH POWER MILLING CHUCK AND STABLE MACHINING CONDITION
HF UNI - Variable Helix and unequal pitch - 45° chamfer
396
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
CUTTING PARAMETERS
HF440
HELICAL
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
_° x ae 5° x 0.4D 4° x 0.4D 3° x 0.4D 3° x 0.4D
Vc (m/min) 110-130 70-90 50-70 30-50
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
312740 0.009 470 8490 0.009 290 6370 0.008 193 4250 0.007 120
49550 0.012 465 6370 0.011 290 4780 0.010 191 3180 0.009 119
57640 0.015 460 5100 0.014 285 3820 0.012 190 2550 0.012 118
66370 0.018 450 4250 0.016 280 3180 0.015 186 2120 0.014 115
84780 0.023 440 3180 0.021 270 2390 0.019 181 1590 0.018 112
10 3820 0.028 420 2550 0.026 260 1910 0.023 173 1270 0.021 108
12 3180 0.031 400 2120 0.029 250 1590 0.026 165 1060 0.024 103
14 2730 0.035 385 1820 0.033 240 1360 0.029 159 910 0.027 99
16 2390 0.039 375 1590 0.037 235 1190 0.032 154 800 0.030 97
20 1910 0.048 365 1270 0.045 225 960 0.039 151 640 0.037 94
_° max ≤ D5 2° 2° 1° 1°
RAMPING
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
_° x ae 15° x D 10° x D 5° x D 5° x D
Vc (m/min) 100-120 60-80 45-65 30-40
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
65840 0.019 455 3720 0.018 265 2920 0.017 198 1860 0.023 174
84380 0.025 440 2790 0.023 260 2190 0.022 193 1390 0.030 168
10 3500 0.030 420 2230 0.028 250 1750 0.026 185 1110 0.036 161
12 2920 0.034 405 1860 0.032 235 1460 0.030 176 930 0.042 154
14 2500 0.039 390 1590 0.036 225 1250 0.034 170 800 0.047 149
16 2190 0.043 375 1390 0.040 220 1090 0.038 165 700 0.052 145
20 1750 0.052 365 1110 0.048 215 880 0.046 162 560 0.063 141
RAMPING
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm²
_° x ae 30° x D 15° x D
Vc (m/min) 80-100 45-65
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
10 2870 0.025 280 1750 0.023 160
12 2390 0.028 270 1460 0.026 150
14 2050 0.032 260 1250 0.029 145
16 1790 0.035 250 1090 0.032 140
20 1430 0.043 245 880 0.039 140
PARAMETERS SUGGESTED WITH HIGH POWER MILLING CHUCK AND STABLE MACHINING CONDITION
HF UNI - Variable Helix and unequal pitch - 45° chamfer
397
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
CUTTING PARAMETERS
HF440
VERTICAL
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
ap x ae D x 0.4D D x 0.4D D x 0.25D D x 0.25D
Vc (m/min) 100-120 60-80 45-65 30-40
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
65840 0.024 570 3720 0.022 330 2920 0.018 210 1860 0.017 130
84380 0.032 550 2790 0.028 320 2190 0.024 210 1390 0.022 120
10 3500 0.038 530 2230 0.034 300 1750 0.028 200 1110 0.026 120
12 2920 0.043 500 1860 0.039 290 1460 0.032 190 930 0.030 110
14 2500 0.049 490 1590 0.044 280 1250 0.036 180 800 0.034 110
16 2190 0.054 470 1390 0.049 270 1090 0.041 180 700 0.038 110
20 1750 0.066 460 1110 0.059 260 880 0.049 170 560 0.046 100
DRILLING
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
ap x ae D x D D x D 0.5D x D 0.5D x D
Vc (m/min) 85-105 55-75 40-60 20-40
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
310080 0.006 250 6900 0.006 160 5310 0.005 110 3180 0.007 90
47560 0.008 250 5180 0.007 160 3980 0.007 110 2390 0.009 90
56050 0.010 250 4140 0.009 150 3180 0.008 110 1910 0.011 90
65040 0.012 240 3450 0.011 150 2650 0.010 100 1590 0.013 90
83780 0.016 240 2590 0.014 150 1990 0.013 100 1190 0.017 80
10 3030 0.019 230 2070 0.017 140 1590 0.015 100 960 0.021 80
12 2520 0.022 220 1730 0.019 130 1330 0.017 90 800 0.024 80
14 2160 0.024 210 1480 0.022 130 1140 0.019 90 680 0.027 70
16 1890 0.027 200 1290 0.024 130 1000 0.022 90 600 0.030 70
20 1510 0.033 200 1040 0.030 120 800 0.026 80 480 0.036 70
ap x ae ≤ D5 0.5D x D 0.5D x D 0.25D x D 0.25D x D
PARAMETERS SUGGESTED WITH HIGH POWER MILLING CHUCK AND STABLE MACHINING CONDITION
HF UNI - Variable Helix and unequal pitch - 45° chamfer
398
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
CUTTING PARAMETERS
HF440
TROCHOIDAL
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
ap x ae 2D x 0.2D 2D x 0.1D 1.5D x 0.1D 1.5D x 0.1D
Vc (m/min) 160-200 110-130 80-100 50-70
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
310080 0.032 1270 6900 0.028 780 5310 0.025 540 3180 0.035 440
47560 0.042 1260 5180 0.037 780 3980 0.033 530 2390 0.046 440
56050 0.052 1250 4140 0.047 770 3180 0.041 530 1910 0.057 430
65040 0.061 1220 3450 0.055 750 2650 0.049 520 1590 0.067 430
83780 0.079 1190 2590 0.071 730 1990 0.063 500 1190 0.087 410
10 3030 0.095 1150 2070 0.085 700 1590 0.076 480 960 0.104 400
12 2520 0.108 1090 1730 0.097 670 1330 0.086 460 800 0.119 380
14 2160 0.122 1050 1480 0.109 650 1140 0.097 440 680 0.134 360
16 1890 0.135 1020 1290 0.122 630 1000 0.108 430 600 0.149 360
20 1510 0.164 990 1040 0.148 610 800 0.131 420 480 0.181 350
ap x ae ≤ D5 1.5D x 0.1D 1.5D x 0.1D
NOTES:
Down milling CNC programming is required.
“ae” value max 0.2xD - “T” value max 0.1xD.
The use of end mill with diameter 30-40% smaller than the width of the slot is recommended.
The cutting conditions are based on CNC programming with medium dynamic speed.
With lower CNC dynamic speed, use the same cutting conditions or reduce the cutting speed Vc.
With higher CNC dynamic speed, reduce the “T” value by approximately -30 -50% and apply the maximum available cutting speed Vc.
X (+)
Y (+) Y
R1 Cutter radius
R2 Half of slot width
T Programming width of cut
ae Actual width of cut
ae
T
R2
R1
PARAMETERS SUGGESTED WITH HIGH POWER MILLING CHUCK AND STABLE MACHINING CONDITION
HF UNI - Variable Helix and unequal pitch - 45° chamfer
399
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
h stock standard f non-standard stock m stock exhaustion
D D Tol. C45° C45° Tol. d(h6) l l1 d1 L z EDP No. Stock
30/-0.030 0.10 +/-0.020 6 9 15 2.80 57 4 HF441030 h
40/-0.030 0.10 +/-0.020 6 11 18 3.80 57 4 HF441040 h
50/-0.030 0.10 +/-0.020 6 13 19 4.80 57 4 HF441050 h
60/-0.030 0.10 +/-0.020 6 13 20 5.80 57 4 HF441060 h
80/-0.030 0.20 +/-0.020 8 20 26 7.80 64 4 HF441080 h
10 0/-0.030 0.20 +/-0.020 10 22 30 9.80 72 4 HF441100 h
12 0/-0.030 0.20 +/-0.020 12 26 36 11.80 83 4 HF441120 h
14 0/-0.030 0.20 +/-0.020 14 26 36 13.70 83 4 HF441140 h
16 0/-0.030 0.30 +/-0.020 16 32 42 15.70 92 4 HF441160 h
18 0/-0.030 0.30 +/-0.020 18 32 42 17.70 92 4 HF441180 h
20 0/-0.030 0.40 +/-0.020 20 38 50 19.70 104 4 HF441200 h
HF441
weldon shank and reduced neck, 45° chamfer
OSAWA
NORM
PMKNSH
+++ +
+ 1st choice , suitable
SLOTTING
2D
SIDE MILLING
HELICAL RAMPING VERTICAL DRILLING
TROCHOIDAL
C45°
C45°
HF UNI - Variable Helix and unequal pitch - 45° chamfer
400
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
CUTTING PARAMETERS
HF441
SLOTTING
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
ap x ae D X D D x D 0.5D x D 0.5D x D
Vc (m/min) 110-130 70-90 50-70 30-50
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
312740 0.013 640 8490 0.011 390 6370 0.009 240 4250 0.009 150
49550 0.017 640 6370 0.015 380 4780 0.012 240 3180 0.012 150
57640 0.021 630 5100 0.019 380 3820 0.016 240 2550 0.014 150
66370 0.024 620 4250 0.022 370 3180 0.018 230 2120 0.017 140
84780 0.032 600 3180 0.028 360 2390 0.024 230 1590 0.022 140
10 3820 0.038 580 2550 0.034 350 1910 0.028 220 1270 0.026 130
12 3180 0.043 550 2120 0.039 330 1590 0.032 210 1060 0.030 130
14 2730 0.049 530 1820 0.044 320 1360 0.036 200 910 0.034 120
16 2390 0.054 520 1590 0.049 310 1190 0.041 190 800 0.038 120
18 2120 0.059 500 1420 0.053 300 1060 0.045 190 710 0.042 120
20 1910 0.066 500 1270 0.059 300 960 0.049 190 640 0.046 120
ap x ae ≤ D5 0.5D x D 0.5D x D 0.25D x D 0.25D x D
SLOTTING
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm²
ap x ae 1.5D x D 1.5D x D
Vc (m/min) 85-105 55-75
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
83780 0.025 380 2590 0.023 230
10 3030 0.030 370 2070 0.027 230
12 2520 0.035 350 1730 0.031 220
14 2160 0.039 340 1480 0.035 210
16 1890 0.043 330 1290 0.039 200
18 1680 0.048 320 1150 0.043 200
20 1510 0.053 320 1040 0.047 200
SLOTTING
Material Group
ISO 513 P1 P2 M1 K1
Hardness/Rm ≤ 700 N/mm²
ap x ae 2D x D
Vc (m/min) 60-80
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
10 2230 0.023 200
12 1860 0.026 190
14 1590 0.029 190
16 1390 0.032 180
18 1240 0.036 180
20 1110 0.039 180
PARAMETERS SUGGESTED WITH HIGH PRECISION WELDON CHUCK AND STABLE MACHINING CONDITION.
FOR APPLICATION ON HIGH POWER MILLING CHUCK, PLEASE REFER TO HF440 PARAMETERS.
HF UNI - Variable Helix and unequal pitch - 45° chamfer
401
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
CUTTING PARAMETERS
HF441
SIDE MILLING
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
ap x ae 1.5D x 0.5D 1.5D x 0.5D 1.2D x 0.3D 1.2D x 0.3D
Vc (m/min) 130-150 90-110 60-80 40-60
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
314860 0.015 900 10620 0.014 580 7430 0.012 360 5310 0.017 350
411150 0.020 890 7960 0.018 570 5570 0.016 360 3980 0.022 350
58920 0.025 890 6370 0.022 570 4460 0.020 350 3180 0.027 350
67430 0.029 870 5310 0.026 560 3720 0.023 350 2650 0.032 340
85570 0.038 840 3980 0.034 540 2790 0.030 340 1990 0.042 330
10 4460 0.045 810 3180 0.041 520 2230 0.036 320 1590 0.050 320
12 3720 0.052 770 2650 0.047 490 1860 0.041 310 1330 0.057 300
14 3180 0.058 740 2270 0.052 480 1590 0.047 300 1140 0.064 290
16 2790 0.065 720 1990 0.058 460 1390 0.052 290 1000 0.071 290
18 2480 0.071 710 1770 0.064 450 1240 0.057 280 880 0.078 280
20 2230 0.079 700 1590 0.071 450 1110 0.063 280 800 0.087 280
ap x ae ≤ D5 1.5D x 0.25D 1.5D x 0.25D 1.2D x 0.1D 1.2D x 0.1D
HELICAL
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
_° x ae 5° x 0.4D 4° x 0.4D 3° x 0.4D 3° x 0.4D
Vc (m/min) 110-130 70-90 50-70 30-50
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
312740 0.009 470 8490 0.009 290 6370 0.008 193 4250 0.007 120
49550 0.012 465 6370 0.011 290 4780 0.010 191 3180 0.009 119
57640 0.015 460 5100 0.014 285 3820 0.012 190 2550 0.012 118
66370 0.018 450 4250 0.016 280 3180 0.015 186 2120 0.014 115
84780 0.023 440 3180 0.021 270 2390 0.019 181 1590 0.018 112
10 3820 0.028 420 2550 0.026 260 1910 0.023 173 1270 0.021 108
12 3180 0.031 400 2120 0.029 250 1590 0.026 165 1060 0.024 103
14 2730 0.035 385 1820 0.033 240 1360 0.029 159 910 0.027 99
16 2390 0.039 375 1590 0.037 235 1190 0.032 154 800 0.030 97
18 2120 0.043 365 1420 0.040 230 1060 0.036 151 710 0.033 95
20 1910 0.048 365 1270 0.045 225 960 0.039 151 640 0.037 94
_° max ≤ D5 2° 2° 1° 1°
PARAMETERS SUGGESTED WITH HIGH PRECISION WELDON CHUCK AND STABLE MACHINING CONDITION.
FOR APPLICATION ON HIGH POWER MILLING CHUCK, PLEASE REFER TO HF440 PARAMETERS.
HF UNI - Variable Helix and unequal pitch - 45° chamfer
402
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
CUTTING PARAMETERS
HF441
RAMPING
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
_° x ae 15° x D 10° x D 5° x D 5° x D
Vc (m/min) 100-120 60-80 45-65 30-40
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
65840 0.019 455 3720 0.018 265 2920 0.017 198 1860 0.023 174
84380 0.025 440 2790 0.023 260 2190 0.022 193 1390 0.030 168
10 3500 0.030 420 2230 0.028 250 1750 0.026 185 1110 0.036 161
12 2920 0.034 405 1860 0.032 235 1460 0.030 176 930 0.042 154
14 2500 0.039 390 1590 0.036 225 1250 0.034 170 800 0.047 149
16 2190 0.043 375 1390 0.040 220 1090 0.038 165 700 0.052 145
18 1950 0.047 370 1240 0.044 215 970 0.042 161 620 0.057 142
20 1750 0.052 365 1110 0.048 215 880 0.046 162 560 0.063 141
RAMPING
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm²
_° x ae 30° x D 15° x D
Vc (m/min) 85-105 55-75
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
10 2870 0.025 280 1750 0.023 160
12 2390 0.028 270 1460 0.026 150
14 2050 0.032 260 1250 0.029 145
16 1790 0.035 250 1090 0.032 140
18 1590 0.039 245 970 0.036 140
20 1430 0.043 245 880 0.039 140
RAMPING
Material Group
ISO 513 P1 P2 M1 K1
Hardness/Rm ≤ 700 N/mm²
_° x ae 45° x D
Vc (m/min) 60-80
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
10 2070 0.024 200
12 1730 0.028 195
14 1480 0.031 185
16 1290 0.035 180
18 1150 0.038 175
20 1040 0.042 175
PARAMETERS SUGGESTED WITH HIGH PRECISION WELDON CHUCK AND STABLE MACHINING CONDITION.
FOR APPLICATION ON HIGH POWER MILLING CHUCK, PLEASE REFER TO HF440 PARAMETERS.
HF UNI - Variable Helix and unequal pitch - 45° chamfer
403
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
CUTTING PARAMETERS
HF441
VERTICAL
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
ap x ae D x 0.4D D x 0.4D D x 0.25D D x 0.25D
Vc (m/min) 100-120 60-80 45-65 30-40
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
65840 0.024 570 3720 0.022 330 2920 0.018 210 1860 0.017 130
84380 0.032 550 2790 0.028 320 2190 0.024 210 1390 0.022 120
10 3500 0.038 530 2230 0.034 300 1750 0.028 200 1110 0.026 120
12 2920 0.043 500 1860 0.039 290 1460 0.032 190 930 0.030 110
14 2500 0.049 490 1590 0.044 280 1250 0.036 180 800 0.034 110
16 2190 0.054 470 1390 0.049 270 1090 0.041 180 700 0.038 110
18 1950 0.059 460 1240 0.053 270 970 0.045 170 620 0.042 100
20 1750 0.066 460 1110 0.059 260 880 0.049 170 560 0.046 100
DRILLING
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
ap x ae D x D D x D 0.5D x D 0.5D x D
Vc (m/min) 85-105 55-75 40-60 20-40
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
310080 0.006 250 6900 0.006 160 5310 0.005 110 3180 0.007 90
47560 0.008 250 5180 0.007 160 3980 0.007 110 2390 0.009 90
56050 0.010 250 4140 0.009 150 3180 0.008 110 1910 0.011 90
65040 0.012 240 3450 0.011 150 2650 0.010 100 1590 0.013 90
83780 0.016 240 2590 0.014 150 1990 0.013 100 1190 0.017 80
10 3030 0.019 230 2070 0.017 140 1590 0.015 100 960 0.021 80
12 2520 0.022 220 1730 0.019 130 1330 0.017 90 800 0.024 80
14 2160 0.024 210 1480 0.022 130 1140 0.019 90 680 0.027 70
16 1890 0.027 200 1290 0.024 130 1000 0.022 90 600 0.030 70
18 1680 0.030 200 1150 0.027 120 880 0.024 80 530 0.033 70
20 1510 0.033 200 1040 0.030 120 800 0.026 80 480 0.036 70
ap x ae ≤ D5 0.5D x D 0.5D x D 0.25D x D 0.25D x D
PARAMETERS SUGGESTED WITH HIGH PRECISION WELDON CHUCK AND STABLE MACHINING CONDITION.
FOR APPLICATION ON HIGH POWER MILLING CHUCK, PLEASE REFER TO HF440 PARAMETERS.
HF UNI - Variable Helix and unequal pitch - 45° chamfer
404
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
CUTTING PARAMETERS
HF441
TROCHOIDAL
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
ap x ae 2D x 0.2D 2D x 0.1D 1.5D x 0.1D 1.5D x 0.1D
Vc (m/min) 160-200 110-130 80-100 50-70
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
310080 0.032 1270 6900 0.028 780 5310 0.025 540 3180 0.035 440
47560 0.042 1260 5180 0.037 780 3980 0.033 530 2390 0.046 440
56050 0.052 1250 4140 0.047 770 3180 0.041 530 1910 0.057 430
65040 0.061 1220 3450 0.055 750 2650 0.049 520 1590 0.067 430
83780 0.079 1190 2590 0.071 730 1990 0.063 500 1190 0.087 410
10 3030 0.095 1150 2070 0.085 700 1590 0.076 480 960 0.104 400
12 2520 0.108 1090 1730 0.097 670 1330 0.086 460 800 0.119 380
14 2160 0.122 1050 1480 0.109 650 1140 0.097 440 680 0.134 360
16 1890 0.135 1020 1290 0.122 630 1000 0.108 430 600 0.149 360
18 1680 0.149 1000 1150 0.134 610 880 0.119 420 530 0.163 350
20 1510 0.164 990 1040 0.148 610 800 0.131 420 480 0.181 350
ap x ae ≤ D5 1.5D x 0.1D 1.5D x 0.1D
NOTES:
Down milling CNC programming is required.
“ae” value max 0.2xD - “T” value max 0.1xD.
The use of end mill with diameter 30-40% smaller than the width of the slot is recommended.
The cutting conditions are based on CNC programming with medium dynamic speed.
With lower CNC dynamic speed, use the same cutting conditions or reduce the cutting speed Vc.
With higher CNC dynamic speed, reduce the “T” value by approximately -30 -50% and apply the maximum available cutting speed Vc.
X (+)
Y (+) Y
R1 Cutter radius
R2 Half of slot width
T Programming width of cut
ae Actual width of cut
ae
T
R2
R1
PARAMETERS SUGGESTED WITH HIGH PRECISION WELDON CHUCK AND STABLE MACHINING CONDITION.
FOR APPLICATION ON HIGH POWER MILLING CHUCK, PLEASE REFER TO HF440 PARAMETERS.
HF UNI - Variable Helix and unequal pitch - 45° chamfer
405
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
h stock standard f non-standard stock m stock exhaustion
D D Tol. C45° C45° Tol. d(h6) l l1 L z EDP No. Stock
60/-0.030 0.10 +/-0.020 6 16 57 4 HF844060 h
80/-0.030 0.20 +/-0.020 8 20 64 4 HF844080 h
10 0/-0.030 0.20 +/-0.020 10 22 72 4 HF844100 h
12 0/-0.030 0.20 +/-0.020 12 26 83 4 HF844120 h
14 0/-0.030 0.20 +/-0.020 14 26 83 4 HF844140 h
16 0/-0.030 0.30 +/-0.020 16 32 92 4 HF844160 h
18 0/-0.030 0.30 +/-0.020 18 32 92 4 HF844180 h
20 0/-0.030 0.40 +/-0.020 20 38 104 4 HF844200 h
HF844
cylindrical shank, 45° chamfer, roughing HR
OSAWA
NORM
PMKNSH
+++ +
+ 1st choice , suitable
SLOTTING
1.5D
SIDE MILLING
HELICAL RAMPING VERTICAL
TROCHOIDAL
C45°
C45°
HF UNI - Variable Helix and unequal pitch - 45° chamfer
406
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
CUTTING PARAMETERS
HF844
SLOTTING
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
ap x ae D X D D x D 0.5D x D 0.5D x D
Vc (m/min) 110-130 70-90 50-70 30-50
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
66370 0.029 740 4250 0.026 450 3180 0.022 280 2120 0.020 170
84780 0.038 720 3180 0.034 430 2390 0.028 270 1590 0.026 170
10 3820 0.045 690 2550 0.041 420 1910 0.034 260 1270 0.032 160
12 3180 0.052 660 2120 0.047 400 1590 0.039 250 1060 0.036 150
14 2730 0.058 640 1820 0.052 380 1360 0.044 240 910 0.041 150
16 2390 0.065 620 1590 0.058 370 1190 0.049 230 800 0.045 150
18 2120 0.071 600 1420 0.064 360 1060 0.053 230 710 0.050 140
20 1910 0.079 600 1270 0.071 360 960 0.059 230 640 0.055 140
SLOTTING
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm²
ap x ae 1.5D x D 1.5D x D
Vc (m/min) 85-105 55-75
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
65040 0.023 470 3450 0.021 290
83780 0.030 460 2590 0.027 280
10 3030 0.036 440 2070 0.033 270
12 2520 0.041 420 1730 0.037 260
14 2160 0.047 400 1480 0.042 250
16 1890 0.052 390 1290 0.047 240
18 1680 0.057 380 1150 0.051 240
20 1510 0.063 380 1040 0.057 240
SIDE MILLING
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
ap x ae 1.5D x 0.5D 1.5D x 0.5D 1.2D x 0.3D 1.2D x 0.3D
Vc (m/min) 130-150 90-110 60-80 40-60
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
67430 0.035 1040 5310 0.031 670 3720 0.028 420 2650 0.038 410
85570 0.045 1010 3980 0.041 650 2790 0.036 400 1990 0.050 400
10 4460 0.054 970 3180 0.049 620 2230 0.044 390 1590 0.060 380
12 3720 0.062 930 2650 0.056 590 1860 0.050 370 1330 0.068 360
14 3180 0.070 890 2270 0.063 570 1590 0.056 360 1140 0.077 350
16 2790 0.078 870 1990 0.070 560 1390 0.062 350 1000 0.086 340
18 2480 0.086 850 1770 0.077 550 1240 0.068 340 880 0.094 330
20 2230 0.095 840 1590 0.085 540 1110 0.076 340 800 0.104 330
PARAMETERS SUGGESTED WITH HIGH POWER MILLING CHUCK AND STABLE MACHINING CONDITION
HF UNI - Variable Helix and unequal pitch - 45° chamfer
407
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
CUTTING PARAMETERS
HF844
HELICAL
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
_° x ae 8° x 0.4D 6° x 0.4D 4° x 0.4D 3° x 0.4D
Vc (m/min) 110-130 70-90 50-70 30-50
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
66370 0.020 515 4250 0.019 315 3180 0.016 210 2120 0.016 139
84780 0.026 500 3180 0.024 310 2390 0.021 204 1590 0.021 135
10 3820 0.031 480 2550 0.029 295 1910 0.026 196 1270 0.025 129
12 3180 0.036 455 2120 0.033 280 1590 0.029 187 1060 0.029 123
14 2730 0.040 440 1820 0.037 270 1360 0.033 179 910 0.033 119
16 2390 0.045 430 1590 0.041 265 1190 0.037 174 800 0.036 116
18 2120 0.049 420 1420 0.046 260 1060 0.040 171 710 0.040 113
20 1910 0.055 415 1270 0.050 255 960 0.045 171 640 0.044 113
RAMPING
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
_° x ae 15° x D 10° x D 5° x D 5° x D
Vc (m/min) 100-120 60-80 45-65 30-40
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
65840 0.023 545 3720 0.021 320 2920 0.020 238 1860 0.028 209
84380 0.030 530 2790 0.028 310 2190 0.026 231 1390 0.036 202
10 3500 0.036 505 2230 0.033 295 1750 0.032 222 1110 0.044 194
12 2920 0.041 485 1860 0.038 285 1460 0.036 212 930 0.050 185
14 2500 0.047 465 1590 0.043 270 1250 0.041 204 800 0.056 179
16 2190 0.052 455 1390 0.048 265 1090 0.045 197 700 0.062 174
18 1950 0.057 445 1240 0.052 260 970 0.050 193 620 0.069 170
20 1750 0.063 440 1110 0.058 255 880 0.055 194 560 0.076 170
RAMPING
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm²
_° x ae 30° x D 15° x D
Vc (m/min) 85-105 45-65
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
10 2870 0.030 340 1750 0.027 190
12 2390 0.034 320 1460 0.031 180
14 2050 0.038 310 1250 0.035 175
16 1790 0.042 300 1090 0.039 170
18 1590 0.046 295 970 0.043 165
20 1430 0.051 295 880 0.047 165
PARAMETERS SUGGESTED WITH HIGH POWER MILLING CHUCK AND STABLE MACHINING CONDITION
HF UNI - Variable Helix and unequal pitch - 45° chamfer
408
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
CUTTING PARAMETERS
HF844
VERTICAL
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
ap x ae D x 0.4D D x 0.4D D x 0.25D D x 0.25D
Vc (m/min) 100-120 60-80 45-65 30-40
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
65840 0.029 680 3720 0.026 390 2920 0.022 260 1860 0.020 150
84380 0.038 660 2790 0.034 380 2190 0.028 250 1390 0.026 150
10 3500 0.045 640 2230 0.041 360 1750 0.034 240 1110 0.032 140
12 2920 0.052 610 1860 0.047 350 1460 0.039 230 930 0.036 130
14 2500 0.058 580 1590 0.052 330 1250 0.044 220 800 0.041 130
16 2190 0.065 570 1390 0.058 320 1090 0.049 210 700 0.045 130
18 1950 0.071 560 1240 0.064 320 970 0.053 210 620 0.050 120
20 1750 0.079 550 1110 0.071 320 880 0.059 210 560 0.055 120
TROCHOIDAL
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
ap x ae 2D x 0.2D 2D x 0.1D 1.5D x 0.1D 1.5D x 0.1D
Vc (m/min) 160-200 110-130 80-100 50-70
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
65040 0.073 1470 3450 0.066 910 2650 0.058 620 1590 0.080 510
83780 0.095 1430 2590 0.085 880 1990 0.076 600 1190 0.104 490
10 3030 0.113 1370 2070 0.102 850 1590 0.091 580 960 0.125 480
12 2520 0.130 1310 1730 0.117 810 1330 0.104 550 800 0.143 460
14 2160 0.146 1260 1480 0.131 780 1140 0.117 530 680 0.160 440
16 1890 0.162 1220 1290 0.146 750 1000 0.130 520 600 0.178 430
18 1680 0.178 1200 1150 0.160 740 880 0.143 500 530 0.196 420
20 1510 0.197 1190 1040 0.177 740 800 0.158 500 480 0.217 420
NOTES:
Down milling CNC programming is required.
“ae” value max 0.2xD - “T” value max 0.1xD.
The use of end mill with diameter 30-40% smaller than the width of the slot is recommended.
The cutting conditions are based on CNC programming with medium dynamic speed.
With lower CNC dynamic speed, use the same cutting conditions or reduce the cutting speed Vc.
With higher CNC dynamic speed, reduce the “T” value by approximately -30 -50% and apply the maximum available cutting speed Vc.
X (+)
Y (+) Y
R1 Cutter radius
R2 Half of slot width
T Programming width of cut
ae Actual width of cut
ae
T
R2
R1
PARAMETERS SUGGESTED WITH HIGH POWER MILLING CHUCK AND STABLE MACHINING CONDITION
HF UNI - Variable Helix and unequal pitch - 45° chamfer
409
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
h stock standard f non-standard stock m stock exhaustion
D D Tol. C45° C45° Tol. d(h6) l l1 d1 L z EDP No. Stock
60/-0.030 0.10 +/-0.020 6 13 20 5.80 57 4 HF444060 h
80/-0.030 0.20 +/-0.020 8 20 26 7.80 64 4 HF444080 h
10 0/-0.030 0.20 +/-0.020 10 22 30 9.80 72 4 HF444100 h
12 0/-0.030 0.20 +/-0.020 12 26 36 11.80 83 4 HF444120 h
14 0/-0.030 0.20 +/-0.020 14 26 36 13.70 83 4 HF444140 h
16 0/-0.030 0.30 +/-0.020 16 32 42 15.70 92 4 HF444160 h
20 0/-0.030 0.40 +/-0.020 20 38 50 19.70 104 4 HF444200 h
HF444
cylindrical shank and reduced neck, 45° chamfer,
roughing HR
OSAWA
NORM
PMKNSH
+++ +
+ 1st choice , suitable
SLOTTING
1.5D
SIDE MILLING
HELICAL RAMPING VERTICAL
TROCHOIDAL
C45°
C45°
HF UNI - Variable Helix and unequal pitch - 45° chamfer
410
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
CUTTING PARAMETERS
HF444
SLOTTING
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
ap x ae D X D D x D 0.5D x D 0.5D x D
Vc (m/min) 110-130 70-90 50-70 30-50
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
66370 0.026 670 4250 0.024 400 3180 0.020 250 2120 0.018 160
84780 0.034 650 3180 0.031 390 2390 0.026 240 1590 0.024 150
10 3820 0.041 620 2550 0.037 370 1910 0.031 230 1270 0.029 150
12 3180 0.047 590 2120 0.042 360 1590 0.035 220 1060 0.033 140
14 2730 0.052 570 1820 0.047 340 1360 0.039 210 910 0.037 130
16 2390 0.058 560 1590 0.052 330 1190 0.044 210 800 0.041 130
20 1910 0.071 540 1270 0.064 320 960 0.053 200 640 0.050 130
SLOTTING
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm²
ap x ae 1.5D x D 1.5D x D
Vc (m/min) 85-105 55-75
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
65040 0.021 420 3450 0.019 260
83780 0.027 410 2590 0.024 250
10 3030 0.033 400 2070 0.029 240
12 2520 0.037 380 1730 0.034 230
14 2160 0.042 360 1480 0.038 220
16 1890 0.047 350 1290 0.042 220
20 1510 0.057 340 1040 0.051 210
SIDE MILLING
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
ap x ae 1.5D x 0.5D 1.5D x 0.5D 1.2D x 0.3D 1.2D x 0.3D
Vc (m/min) 130-150 90-110 60-80 40-60
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
67430 0.031 940 5310 0.028 600 3720 0.025 370 2650 0.035 370
85570 0.041 910 3980 0.037 580 2790 0.033 360 1990 0.045 360
10 4460 0.049 870 3180 0.044 560 2230 0.039 350 1590 0.054 340
12 3720 0.056 830 2650 0.050 530 1860 0.045 330 1330 0.062 330
14 3180 0.063 800 2270 0.057 510 1590 0.050 320 1140 0.069 320
16 2790 0.070 780 1990 0.063 500 1390 0.056 310 1000 0.077 310
20 2230 0.085 760 1590 0.077 490 1110 0.068 300 800 0.094 300
PARAMETERS SUGGESTED WITH HIGH POWER MILLING CHUCK AND STABLE MACHINING CONDITION
HF UNI - Variable Helix and unequal pitch - 45° chamfer
411
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
CUTTING PARAMETERS
HF444
HELICAL
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
_° x ae 7° x 0.4D 5° x 0.4D 3° x 0.4D 3° x 0.4D
Vc (m/min) 110-130 70-90 50-70 30-50
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
66370 0.018 470 4250 0.017 290 3180 0.016 200 2120 0.015 125
84780 0.024 455 3180 0.022 285 2390 0.020 195 1590 0.019 121
10 3820 0.029 435 2550 0.027 275 1910 0.025 187 1270 0.023 116
12 3180 0.033 415 2120 0.031 260 1590 0.028 178 1060 0.026 111
14 2730 0.037 400 1820 0.034 250 1360 0.032 171 910 0.029 107
16 2390 0.041 390 1590 0.038 245 1190 0.035 167 800 0.033 105
20 1910 0.050 380 1270 0.046 235 960 0.043 164 640 0.040 102
RAMPING
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
_° x ae 15° x D 10° x D 5° x D 5° x D
Vc (m/min) 100-120 60-80 45-65 30-40
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
65840 0.021 490 3720 0.019 285 2920 0.018 214 1860 0.025 188
84380 0.027 475 2790 0.025 280 2190 0.024 208 1390 0.033 182
10 3500 0.033 455 2230 0.030 265 1750 0.029 200 1110 0.039 174
12 2920 0.037 435 1860 0.034 255 1460 0.033 190 930 0.045 167
14 2500 0.042 420 1590 0.039 245 1250 0.037 183 800 0.050 161
16 2190 0.047 410 1390 0.043 240 1090 0.041 178 700 0.056 157
20 1750 0.057 395 1110 0.052 230 880 0.050 175 560 0.068 153
RAMPING
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm²
_° x ae 30° x D 15° x D
Vc (m/min) 85-105 45-65
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
10 2870 0.027 305 1750 0.024 170
12 2390 0.030 290 1460 0.028 165
14 2050 0.034 280 1250 0.031 155
16 1790 0.038 270 1090 0.035 150
20 1430 0.046 265 880 0.042 150
PARAMETERS SUGGESTED WITH HIGH POWER MILLING CHUCK AND STABLE MACHINING CONDITION
HF UNI - Variable Helix and unequal pitch - 45° chamfer
412
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
CUTTING PARAMETERS
HF444
VERTICAL
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
ap x ae D x 0.4D D x 0.4D D x 0.25D D x 0.25D
Vc (m/min) 100-120 60-80 45-65 30-40
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
65840 0.026 610 3720 0.024 350 2920 0.020 230 1860 0.018 140
84380 0.034 600 2790 0.031 340 2190 0.026 220 1390 0.024 130
10 3500 0.041 570 2230 0.037 330 1750 0.031 210 1110 0.029 130
12 2920 0.047 540 1860 0.042 310 1460 0.035 200 930 0.033 120
14 2500 0.052 520 1590 0.047 300 1250 0.039 200 800 0.037 120
16 2190 0.058 510 1390 0.052 290 1090 0.044 190 700 0.041 110
20 1750 0.071 500 1110 0.064 280 880 0.053 190 560 0.050 110
TROCHOIDAL
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
ap x ae 2D x 0.2D 2D x 0.1D 1.5D x 0.1D 1.5D x 0.1D
Vc (m/min) 160-200 110-130 80-100 50-70
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
65040 0.066 1320 3450 0.059 810 2650 0.052 560 1590 0.072 460
83780 0.085 1290 2590 0.077 790 1990 0.068 540 1190 0.094 450
10 3030 0.102 1240 2070 0.092 760 1590 0.082 520 960 0.112 430
12 2520 0.117 1180 1730 0.105 730 1330 0.093 500 800 0.128 410
14 2160 0.131 1130 1480 0.118 700 1140 0.105 480 680 0.144 390
16 1890 0.146 1100 1290 0.131 680 1000 0.117 470 600 0.160 380
20 1510 0.177 1070 1040 0.160 660 800 0.142 450 480 0.195 370
NOTES:
Down milling CNC programming is required.
“ae” value max 0.2xD - “T” value max 0.1xD.
The use of end mill with diameter 30-40% smaller than the width of the slot is recommended.
The cutting conditions are based on CNC programming with medium dynamic speed.
With lower CNC dynamic speed, use the same cutting conditions or reduce the cutting speed Vc.
With higher CNC dynamic speed, reduce the “T” value by approximately -30 -50% and apply the maximum available cutting speed Vc.
X (+)
Y (+) Y
R1 Cutter radius
R2 Half of slot width
T Programming width of cut
ae Actual width of cut
ae
T
R2
R1
PARAMETERS SUGGESTED WITH HIGH POWER MILLING CHUCK AND STABLE MACHINING CONDITION
HF UNI - Variable Helix and unequal pitch - 45° chamfer
413
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
h stock standard f non-standard stock m stock exhaustion
D D Tol. C45° C45° Tol. d(h6) l l1 d1 L z EDP No. Stock
60/-0.030 0.10 +/-0.020 6 13 20 5.80 57 4 HF445060 h
80/-0.030 0.20 +/-0.020 8 20 26 7.80 64 4 HF445080 h
10 0/-0.030 0.20 +/-0.020 10 22 30 9.80 72 4 HF445100 h
12 0/-0.030 0.20 +/-0.020 12 26 36 11.80 83 4 HF445120 h
14 0/-0.030 0.20 +/-0.020 14 26 36 13.70 83 4 HF445140 h
16 0/-0.030 0.30 +/-0.020 16 32 42 15.70 92 4 HF445160 h
20 0/-0.030 0.40 +/-0.020 20 38 50 19.70 104 4 HF445200 h
HF445
weldon shank and reduced neck, 45° chamfer,
roughing HR
OSAWA
NORM
PMKNSH
+++ +
+ 1st choice , suitable
SLOTTING
1.5D
SIDE MILLING
HELICAL RAMPING VERTICAL
TROCHOIDAL
C45°
C45°
HF UNI - Variable Helix and unequal pitch - 45° chamfer
414
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
CUTTING PARAMETERS
HF445
SLOTTING
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
ap x ae D X D D x D 0.5D x D 0.5D x D
Vc (m/min) 110-130 70-90 50-70 30-50
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
66370 0.026 670 4250 0.024 400 3180 0.020 250 2120 0.018 160
84780 0.034 650 3180 0.031 390 2390 0.026 240 1590 0.024 150
10 3820 0.041 620 2550 0.037 370 1910 0.031 230 1270 0.029 150
12 3180 0.047 590 2120 0.042 360 1590 0.035 220 1060 0.033 140
14 2730 0.052 570 1820 0.047 340 1360 0.039 210 910 0.037 130
16 2390 0.058 560 1590 0.052 330 1190 0.044 210 800 0.041 130
20 1910 0.071 540 1270 0.064 320 960 0.053 200 640 0.050 130
SLOTTING
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm²
ap x ae 1.5D x D 1.5D x D
Vc (m/min) 85-105 55-75
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
83780 0.027 410 2590 0.024 250
10 3030 0.033 400 2070 0.029 240
12 2520 0.037 380 1730 0.034 230
14 2160 0.042 360 1480 0.038 220
16 1890 0.047 350 1290 0.042 220
20 1510 0.057 340 1040 0.051 210
SLOTTING
Material Group
ISO 513 P1 P2 M1 K1
Hardness/Rm ≤ 700 N/mm²
ap x ae 2D x D
Vc (m/min) 60-80
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
63720 0.016 230
82790 0.020 230
10 2230 0.024 220
12 1860 0.028 210
14 1590 0.031 200
16 1390 0.035 190
20 1110 0.043 190
PARAMETERS SUGGESTED WITH HIGH PRECISION WELDON CHUCK AND STABLE MACHINING CONDITION.
FOR APPLICATION ON HIGH POWER MILLING CHUCK, PLEASE REFER TO HF444 PARAMETERS.
HF UNI - Variable Helix and unequal pitch - 45° chamfer
415
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
CUTTING PARAMETERS
HF445
SIDE MILLING
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
ap x ae 1.5D x 0.5D 1.5D x 0.5D 1.2D x 0.3D 1.2D x 0.3D
Vc (m/min) 130-150 90-110 60-80 40-60
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
67430 0.031 940 5310 0.028 600 3720 0.025 370 2650 0.035 370
85570 0.041 910 3980 0.037 580 2790 0.033 360 1990 0.045 360
10 4460 0.049 870 3180 0.044 560 2230 0.039 350 1590 0.054 340
12 3720 0.056 830 2650 0.050 530 1860 0.045 330 1330 0.062 330
14 3180 0.063 800 2270 0.057 510 1590 0.050 320 1140 0.069 320
16 2790 0.070 780 1990 0.063 500 1390 0.056 310 1000 0.077 310
20 2230 0.085 760 1590 0.077 490 1110 0.068 300 800 0.094 300
HELICAL
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
_° x ae 7° x 0.4D 5° x 0.4D 3° x 0.4D 3° x 0.4D
Vc (m/min) 110-130 70-90 50-70 30-50
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
66370 0.018 470 4250 0.017 290 3180 0.016 200 2120 0.015 125
84780 0.024 455 3180 0.022 285 2390 0.020 195 1590 0.019 121
10 3820 0.029 435 2550 0.027 275 1910 0.025 187 1270 0.023 116
12 3180 0.033 415 2120 0.031 260 1590 0.028 178 1060 0.026 111
14 2730 0.037 400 1820 0.034 250 1360 0.032 171 910 0.029 107
16 2390 0.041 390 1590 0.038 245 1190 0.035 167 800 0.033 105
20 1910 0.050 380 1270 0.046 235 960 0.043 164 640 0.040 102
RAMPING
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
_° x ae 15° x D 10° x D 5° x D 5° x D
Vc (m/min) 100-120 60-80 45-65 30-40
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
84380 0.027 475 2790 0.025 280 2190 0.024 208 1390 0.033 182
10 3500 0.033 455 2230 0.030 265 1750 0.029 200 1110 0.039 174
12 2920 0.037 435 1860 0.034 255 1460 0.033 190 930 0.045 167
14 2500 0.042 420 1590 0.039 245 1250 0.037 183 800 0.050 161
16 2190 0.047 410 1390 0.043 240 1090 0.041 178 700 0.056 157
20 1750 0.057 395 1110 0.052 230 880 0.050 175 560 0.068 153
PARAMETERS SUGGESTED WITH HIGH PRECISION WELDON CHUCK AND STABLE MACHINING CONDITION.
FOR APPLICATION ON HIGH POWER MILLING CHUCK, PLEASE REFER TO HF444 PARAMETERS.
HF UNI - Variable Helix and unequal pitch - 45° chamfer
416
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
CUTTING PARAMETERS
HF445
RAMPING
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
_° x ae 30° x D 15° x D
Vc (m/min) 85-105 45-65
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
10 2870 0.027 305 1750 0.024 170
12 2390 0.030 290 1460 0.028 165
14 2050 0.034 280 1250 0.031 155
16 1790 0.038 270 1090 0.035 150
20 1430 0.046 265 880 0.042 150
RAMPING
Material Group
ISO 513 P1 P2 M1 K1
Hardness/Rm ≤ 700 N/mm²
_° x ae 45° x D
Vc (m/min) 55-75
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
10 2070 0.026 220
12 1730 0.030 210
14 1480 0.034 200
16 1290 0.038 195
20 1040 0.046 190
VERTICAL
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
ap x ae D x 0.4D D x 0.4D D x 0.25D D x 0.25D
Vc (m/min) 100-120 60-80 45-65 30-40
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
65840 0.026 610 3720 0.024 350 2920 0.020 230 1860 0.018 140
84380 0.034 600 2790 0.031 340 2190 0.026 220 1390 0.024 130
10 3500 0.041 570 2230 0.037 330 1750 0.031 210 1110 0.029 130
12 2920 0.047 540 1860 0.042 310 1460 0.035 200 930 0.033 120
14 2500 0.052 520 1590 0.047 300 1250 0.039 200 800 0.037 120
16 2190 0.058 510 1390 0.052 290 1090 0.044 190 700 0.041 110
20 1750 0.071 500 1110 0.064 280 880 0.053 190 560 0.050 110
PARAMETERS SUGGESTED WITH HIGH PRECISION WELDON CHUCK AND STABLE MACHINING CONDITION.
FOR APPLICATION ON HIGH POWER MILLING CHUCK, PLEASE REFER TO HF444 PARAMETERS.
HF UNI - Variable Helix and unequal pitch - 45° chamfer
417
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
CUTTING PARAMETERS
HF445
TROCHOIDAL
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
ap x ae 2D x 0.2D 2D x 0.1D 1.5D x 0.1D 1.5D x 0.1D
Vc (m/min) 160-200 110-130 80-100 50-70
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
65040 0.066 1320 3450 0.059 810 2650 0.052 560 1590 0.072 460
83780 0.085 1290 2590 0.077 790 1990 0.068 540 1190 0.094 450
10 3030 0.102 1240 2070 0.092 760 1590 0.082 520 960 0.112 430
12 2520 0.117 1180 1730 0.105 730 1330 0.093 500 800 0.128 410
14 2160 0.131 1130 1480 0.118 700 1140 0.105 480 680 0.144 390
16 1890 0.146 1100 1290 0.131 680 1000 0.117 470 600 0.160 380
20 1510 0.177 1070 1040 0.160 660 800 0.142 450 480 0.195 370
NOTES:
Down milling CNC programming is required.
“ae” value max 0.2xD - “T” value max 0.1xD.
The use of end mill with diameter 30-40% smaller than the width of the slot is recommended.
The cutting conditions are based on CNC programming with medium dynamic speed.
With lower CNC dynamic speed, use the same cutting conditions or reduce the cutting speed Vc.
With higher CNC dynamic speed, reduce the “T” value by approximately -30 -50% and apply the maximum available cutting speed Vc.
X (+)
Y (+) Y
R1 Cutter radius
R2 Half of slot width
T Programming width of cut
ae Actual width of cut
ae
T
R2
R1
PARAMETERS SUGGESTED WITH HIGH PRECISION WELDON CHUCK AND STABLE MACHINING CONDITION.
FOR APPLICATION ON HIGH POWER MILLING CHUCK, PLEASE REFER TO HF444 PARAMETERS.
HF UNI - Variable Helix and unequal pitch - Corner radius
418
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
h stock standard f non-standard stock m stock exhaustion
D D Tol. CR CR Tol. d(h6) l l1 d1 L z EDP No. Stock
30/-0.030 0.20 +/-0.010 6 5 9 2.80 50 4 HF34202030 h
40/-0.030 0.20 +/-0.010 6 6 12 3.80 50 4 HF34202040 h
50/-0.030 0.20 +/-0.010 6 8 14 4.80 50 4 HF34202050 h
60/-0.030 0.30 +/-0.010 6 9 18 5.80 55 4 HF34203060 h
80/-0.030 0.50 +/-0.010 8 12 24 7.80 60 4 HF34205080 h
10 0/-0.030 1.00 +/-0.010 10 15 30 9.80 70 4 HF34210100 h
12 0/-0.030 1.00 +/-0.010 12 18 35 11.80 80 4 HF34210120 h
HF342
cylindrical shank and reduced neck, extra short,
corner radius
OSAWA
NORM
PMKNSH
+++ +
+ 1st choice , suitable
SLOTTING
SIDE MILLING
HELICAL RAMPING VERTICAL DRILLING
CR
CR
HF UNI - Variable Helix and unequal pitch - Corner radius
419
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
CUTTING PARAMETERS
HF342
SLOTTING
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
ap x ae D X D D x D 0.5D x D 0.5D x D
Vc (m/min) 110-130 70-90 50-70 30-50
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
314860 0.014 830 9550 0.013 480 7430 0.011 310 4250 0.010 170
411150 0.019 830 7170 0.017 480 5570 0.014 310 3180 0.013 160
58920 0.023 820 5730 0.021 470 4460 0.017 310 2550 0.016 160
67430 0.027 800 4780 0.024 460 3720 0.020 300 2120 0.019 160
85570 0.035 780 3580 0.032 450 2790 0.026 290 1590 0.025 160
10 4460 0.042 750 2870 0.038 430 2230 0.032 280 1270 0.029 150
12 3720 0.048 710 2390 0.043 410 1860 0.036 270 1060 0.034 140
ap x ae ≤ D5 0.5D x D 0.5D x D 0.25D x D 0.25D x D
SIDE MILLING
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
ap x ae 1.2D x 0.5D 1.2D x 0.5D D x 0.3D D x 0.3D
Vc (m/min) 160-180 100-120 70-90 40-60
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
318050 0.017 1210 11680 0.015 710 8490 0.013 460 5310 0.018 390
413540 0.022 1200 8760 0.020 700 6370 0.018 450 3980 0.024 390
510830 0.028 1200 7010 0.025 700 5100 0.022 450 3180 0.030 390
69020 0.032 1170 5840 0.029 680 4250 0.026 440 2650 0.036 380
86770 0.042 1140 4380 0.038 660 3180 0.034 430 1990 0.046 370
10 5410 0.050 1090 3500 0.045 640 2550 0.040 410 1590 0.055 350
12 4510 0.058 1040 2920 0.052 610 2120 0.046 390 1330 0.063 340
ap x ae ≤ D5 1.2D x 0.3D 1.2D x 0.3D D x 0.2D D x 0.2D
HELICAL
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
_° x ae 5° x 0.4D 4° x 0.4D 3° x 0.4D 3° x 0.4D
Vc (m/min) 130-150 80-100 60-80 30-50
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
314860 0.010 605 9550 0.010 365 7430 0.008 250 4250 0.008 133
411150 0.013 600 7170 0.013 360 5570 0.011 247 3180 0.010 132
58920 0.017 600 5730 0.016 360 4460 0.014 246 2550 0.013 131
67430 0.020 585 4780 0.018 350 3720 0.016 241 2120 0.015 128
85570 0.025 570 3580 0.024 340 2790 0.021 235 1590 0.020 125
10 4460 0.031 545 2870 0.029 325 2230 0.025 225 1270 0.024 120
12 3720 0.035 520 2390 0.033 310 1860 0.029 214 1060 0.027 114
_° ≤ D5 2° 2° 1° 1°
PARAMETERS SUGGESTED WITH HIGH POWER MILLING CHUCK AND STABLE MACHINING CONDITION
HF UNI - Variable Helix and unequal pitch - Corner radius
420
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
CUTTING PARAMETERS
HF342
RAMPING
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
_° x ae 15° x 0.4D 10° x 0.4D 5° x 0.4D 5° x 0.4D
Vc (m/min) 120-140 70-90 55-75 25-45
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
66900 0.022 595 4250 0.020 335 3450 0.019 260 1860 0.026 193
85180 0.028 580 3180 0.026 325 2590 0.024 253 1390 0.034 187
10 4140 0.034 555 2550 0.031 315 2070 0.029 243 1110 0.040 179
12 3450 0.038 530 2120 0.035 300 1730 0.034 232 930 0.046 172
VERTICAL
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
ap x ae D x 0.4D D x 0.4D D x 0.25D D x 0.25D
Vc (m/min) 120-140 70-90 55-75 25-45
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
66900 0.027 750 4250 0.024 410 3450 0.020 280 1860 0.019 140
85180 0.035 730 3180 0.032 400 2590 0.026 270 1390 0.025 140
10 4140 0.042 700 2550 0.038 390 2070 0.032 260 1110 0.029 130
12 3450 0.048 660 2120 0.043 370 1730 0.036 250 930 0.034 120
DRILLING
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
ap x ae D x D D x D 0.5D x D 0.5D x D
Vc (m/min) 100-120 60-80 45-65 590-690
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
311680 0.007 330 7430 0.006 190 5840 0.006 130 3180 0.008 100
48760 0.009 320 5570 0.008 190 4380 0.007 130 2390 0.010 100
57010 0.012 320 4460 0.010 180 3500 0.009 130 1910 0.013 100
65840 0.014 320 3720 0.012 180 2920 0.011 130 1590 0.015 90
84380 0.018 310 2790 0.016 180 2190 0.014 120 1190 0.019 90
10 3500 0.021 290 2230 0.019 170 1750 0.017 120 960 0.023 90
12 2920 0.024 280 1860 0.022 160 1460 0.019 110 800 0.026 80
ap x ae ≤ D5 0.5D x D 0.5D x D 0.25D x D 0.25D x D
PARAMETERS SUGGESTED WITH HIGH POWER MILLING CHUCK AND STABLE MACHINING CONDITION
HF UNI - Variable Helix and unequal pitch - Corner radius
421
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
h stock standard f non-standard stock m stock exhaustion
D D Tol. CR CR Tol. d(h6) l l1 L z EDP No. Stock
40/-0.025 0.30 +/-0.010 6 11 57 4 HF84203040 h
40/-0.025 0.50 +/-0.010 6 11 57 4 HF84205040 h
50/-0.025 0.30 +/-0.010 6 13 57 4 HF84203050 h
50/-0.025 0.50 +/-0.010 6 13 57 4 HF84205050 h
60/-0.025 0.30 +/-0.010 6 13 57 4 HF84203060 h
60/-0.025 0.50 +/-0.010 6 13 57 4 HF84205060 h
60/-0.025 1.00 +/-0.010 6 13 57 4 HF84210060 h
80/-0.030 0.50 +/-0.010 8 20 64 4 HF84205080 h
80/-0.030 1.00 +/-0.010 8 20 64 4 HF84210080 h
10 0/-0.030 0.50 +/-0.010 10 22 72 4 HF84205100 h
10 0/-0.030 1.00 +/-0.010 10 22 72 4 HF84210100 h
12 0/-0.030 0.50 +/-0.010 12 26 83 4 HF84205120 h
12 0/-0.030 1.00 +/-0.010 12 26 83 4 HF84210120 h
12 0/-0.030 2.00 +/-0.010 12 26 83 4 HF84220120 h
12 0/-0.030 3.00 +/-0.010 12 26 83 4 HF84230120 h
14 0/-0.030 1.00 +/-0.010 14 26 83 4 HF84210140 h
16 0/-0.030 1.00 +/-0.010 16 32 92 4 HF84210160 h
16 0/-0.030 2.00 +/-0.010 16 32 92 4 HF84220160 h
16 0/-0.030 3.00 +/-0.010 16 32 92 4 HF84230160 h
18 0/-0.030 1.00 +/-0.010 18 32 92 4 HF84210180 h
20 0/-0.030 1.00 +/-0.010 20 38 104 4 HF84210200 h
20 0/-0.030 2.00 +/-0.010 20 38 104 4 HF84220200 h
20 0/-0.030 3.00 +/-0.010 20 38 104 4 HF84230200 h
HF842
cylindrical shank, corner radius
OSAWA
NORM
PMKNSH
+++ +
+ 1st choice , suitable
SLOTTING
SIDE MILLING
HELICAL RAMPING VERTICAL DRILLING
TROCHOIDAL
CR
CR
HF UNI - Variable Helix and unequal pitch - Corner radius
422
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
CUTTING PARAMETERS
HF842
SLOTTING
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
ap x ae D X D D x D 0.5D x D 0.5D x D
Vc (m/min) 130-150 80-100 60-80 30-50
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
411150 0.019 830 7170 0.017 480 5570 0.014 310 3180 0.013 160
58920 0.023 820 5730 0.021 470 4460 0.017 310 2550 0.016 160
67430 0.027 800 4780 0.024 460 3720 0.020 300 2120 0.019 160
85570 0.035 780 3580 0.032 450 2790 0.026 290 1590 0.025 160
10 4460 0.042 750 2870 0.038 430 2230 0.032 280 1270 0.029 150
12 3720 0.048 710 2390 0.043 410 1860 0.036 270 1060 0.034 140
14 3180 0.054 690 2050 0.049 400 1590 0.041 260 910 0.038 140
16 2790 0.060 670 1790 0.054 390 1390 0.045 250 800 0.042 130
18 2480 0.066 650 1590 0.059 380 1240 0.050 250 710 0.046 130
20 2230 0.073 650 1430 0.066 380 1110 0.055 240 640 0.051 130
ap x ae ≤ D5 0.5D x D 0.5D x D 0.25D x D 0.25D x D
SIDE MILLING
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
ap x ae 1.5D x 0.5D 1.5D x 0.5D 1.2D x 0.3D 1.2D x 0.3D
Vc (m/min) 160-180 100-120 70-90 40-60
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
413540 0.022 1200 8760 0.020 700 6370 0.018 450 3980 0.024 390
510830 0.028 1200 7010 0.025 700 5100 0.022 450 3180 0.030 390
69020 0.032 1170 5840 0.029 680 4250 0.026 440 2650 0.036 380
86770 0.042 1140 4380 0.038 660 3180 0.034 430 1990 0.046 370
10 5410 0.050 1090 3500 0.045 640 2550 0.040 410 1590 0.055 350
12 4510 0.058 1040 2920 0.052 610 2120 0.046 390 1330 0.063 340
14 3870 0.065 1000 2500 0.058 580 1820 0.052 380 1140 0.071 330
16 3380 0.072 970 2190 0.065 570 1590 0.058 370 1000 0.079 320
18 3010 0.079 950 1950 0.071 560 1420 0.063 360 880 0.087 310
20 2710 0.088 950 1750 0.079 550 1270 0.070 360 800 0.096 310
ap x ae ≤ D5 1.5D x 0.25D 1.5D x 0.25D 1.2D x 0.1D 1.2D x 0.1D
HELICAL
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
_° x ae 5° x 0.4D 4° x 0.4D 3° x 0.4D 3° x 0.4D
Vc (m/min) 130-150 80-100 60-80 30-50
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
411150 0.013 600 7170 0.013 360 5570 0.011 247 3180 0.010 132
58920 0.017 600 5730 0.016 360 4460 0.014 246 2550 0.013 131
67430 0.020 585 4780 0.018 350 3720 0.016 241 2120 0.015 128
85570 0.025 570 3580 0.024 340 2790 0.021 235 1590 0.020 125
10 4460 0.031 545 2870 0.029 325 2230 0.025 225 1270 0.024 120
12 3720 0.035 520 2390 0.033 310 1860 0.029 214 1060 0.027 114
14 3180 0.039 500 2050 0.037 300 1590 0.032 206 910 0.030 110
16 2790 0.044 490 1790 0.041 290 1390 0.036 200 800 0.034 108
18 2480 0.048 475 1590 0.045 285 1240 0.040 197 710 0.037 105
20 2230 0.053 475 1430 0.050 285 1110 0.044 195 640 0.041 105
_° max ≤ D5 2° 2° 1° 1°
PARAMETERS SUGGESTED WITH HIGH POWER MILLING CHUCK AND STABLE MACHINING CONDITION
HF UNI - Variable Helix and unequal pitch - Corner radius
423
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
CUTTING PARAMETERS
HF842
RAMPING
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
_° x ae 15° x 0.4D 10° x 0.4D 5° x 0.4D 5° x 0.4D
Vc (m/min) 130-150 80-100 60-80 30-50
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
67430 0.022 640 4780 0.020 380 3720 0.019 281 2120 0.026 220
85570 0.028 620 3580 0.026 370 2790 0.024 273 1590 0.034 214
10 4460 0.034 600 2870 0.031 355 2230 0.029 262 1270 0.040 205
12 3720 0.038 570 2390 0.035 335 1860 0.034 250 1060 0.046 196
14 3180 0.043 550 2050 0.040 325 1590 0.038 240 910 0.052 189
16 2790 0.048 535 1790 0.044 315 1390 0.042 233 800 0.058 185
18 2480 0.053 520 1590 0.048 310 1240 0.046 229 710 0.063 180
20 2230 0.058 520 1430 0.054 305 1110 0.051 227 640 0.070 180
VERTICAL
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
ap x ae D x 0.4D D x 0.4D D x 0.25D D x 0.25D
Vc (m/min) 130-150 80-100 60-80 30-50
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
67430 0.027 800 4780 0.024 460 3720 0.020 300 2120 0.019 160
85570 0.035 780 3580 0.032 450 2790 0.026 290 1590 0.025 160
10 4460 0.042 750 2870 0.038 430 2230 0.032 280 1270 0.029 150
12 3720 0.048 710 2390 0.043 410 1860 0.036 270 1060 0.034 140
14 3180 0.054 690 2050 0.049 400 1590 0.041 260 910 0.038 140
16 2790 0.060 670 1790 0.054 390 1390 0.045 250 800 0.042 130
18 2480 0.066 650 1590 0.059 380 1240 0.050 250 710 0.046 130
20 2230 0.073 650 1430 0.066 380 1110 0.055 240 640 0.051 130
DRILLING
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
ap x ae D x D D x D 0.5D x D 0.5D x D
Vc (m/min) 100-120 60-80 45-65 590-690
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
48760 0.009 320 5570 0.008 190 4380 0.007 130 2390 0.010 100
57010 0.012 320 4460 0.010 180 3500 0.009 130 1910 0.013 100
65840 0.014 320 3720 0.012 180 2920 0.011 130 1590 0.015 90
84380 0.018 310 2790 0.016 180 2190 0.014 120 1190 0.019 90
10 3500 0.021 290 2230 0.019 170 1750 0.017 120 960 0.023 90
12 2920 0.024 280 1860 0.022 160 1460 0.019 110 800 0.026 80
14 2500 0.027 270 1590 0.024 150 1250 0.022 110 680 0.030 80
16 2190 0.030 260 1390 0.027 150 1090 0.024 100 600 0.033 80
18 1950 0.033 260 1240 0.030 150 970 0.026 100 530 0.036 80
20 1750 0.037 260 1110 0.033 150 880 0.029 100 480 0.040 80
ap x ae ≤ D5 0.5D x D 0.5D x D 0.25D x D 0.25D x D
PARAMETERS SUGGESTED WITH HIGH POWER MILLING CHUCK AND STABLE MACHINING CONDITION
HF UNI - Variable Helix and unequal pitch - Corner radius
424
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
CUTTING PARAMETERS
HF842
TROCHOIDAL
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
ap x ae 2D x 0.2D 2D x 0.1D 1.5D x 0.1D 1.5D x 0.1D
Vc (m/min) 190-230 130-150 100-120 50-70
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
48760 0.046 1620 5570 0.042 930 4380 0.037 650 2390 0.051 490
57010 0.058 1610 4460 0.052 920 3500 0.046 640 1910 0.063 480
65840 0.068 1580 3720 0.061 900 2920 0.054 630 1590 0.074 470
84380 0.088 1530 2790 0.079 880 2190 0.070 610 1190 0.096 460
10 3500 0.105 1470 2230 0.095 840 1750 0.084 590 960 0.116 440
12 2920 0.120 1400 1860 0.108 800 1460 0.096 560 800 0.132 420
14 2500 0.135 1350 1590 0.122 770 1250 0.108 540 680 0.149 400
16 2190 0.150 1310 1390 0.135 750 1090 0.120 520 600 0.165 400
18 1950 0.165 1290 1240 0.149 740 970 0.132 510 530 0.182 380
20 1750 0.183 1280 1110 0.164 730 880 0.146 510 480 0.201 390
ap x ae ≤ D5 1.5D x 0.1D 1.5D x 0.1D
NOTES:
Down milling CNC programming is required.
“ae” value max 0.2xD - “T” value max 0.1xD.
The use of end mill with diameter 30-40% smaller than the width of the slot is recommended.
The cutting conditions are based on CNC programming with medium dynamic speed.
With lower CNC dynamic speed, use the same cutting conditions or reduce the cutting speed Vc.
With higher CNC dynamic speed, reduce the “T” value by approximately -30 -50% and apply the maximum available cutting speed Vc.
X (+)
Y (+) Y
R1 Cutter radius
R2 Half of slot width
T Programming width of cut
ae Actual width of cut
ae
T
R2
R1
PARAMETERS SUGGESTED WITH HIGH POWER MILLING CHUCK AND STABLE MACHINING CONDITION
HF UNI - Variable Helix and unequal pitch - Corner radius
425
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
h stock standard f non-standard stock m stock exhaustion
D D Tol. CR CR Tol. d(h6) l l1 d1 L z EDP No. Stock
30/-0.030 0.30 +/-0.020 6 9 15 2.80 57 4 HF44203030 h
30/-0.030 0.50 +/-0.020 6 9 15 2.80 57 4 HF44205030 h
40/-0.030 0.30 +/-0.020 6 11 18 3.80 57 4 HF44203040 h
40/-0.030 0.50 +/-0.020 6 11 18 3.80 57 4 HF44205040 h
50/-0.030 0.30 +/-0.020 6 13 19 4.80 57 4 HF44203050 h
50/-0.030 0.50 +/-0.020 6 13 19 4.80 57 4 HF44205050 h
60/-0.030 0.30 +/-0.020 6 13 20 5.80 57 4 HF44203060 h
60/-0.030 0.50 +/-0.020 6 13 20 5.80 57 4 HF44205060 h
60/-0.030 1.00 +/-0.020 6 13 20 5.80 57 4 HF44210060 h
80/-0.030 0.50 +/-0.020 8 20 26 7.80 64 4 HF44205080 h
80/-0.030 1.00 +/-0.020 8 20 26 7.80 64 4 HF44210080 h
10 0/-0.030 0.50 +/-0.020 10 22 30 9.80 72 4 HF44205100 h
10 0/-0.030 1.00 +/-0.020 10 22 30 9.80 72 4 HF44210100 h
12 0/-0.030 0.50 +/-0.020 12 26 36 11.80 83 4 HF44205120 h
12 0/-0.030 1.00 +/-0.020 12 26 36 11.80 83 4 HF44210120 h
14 0/-0.030 1.00 +/-0.020 14 26 36 13.70 83 4 HF44210140 h
16 0/-0.030 1.00 +/-0.020 16 32 42 15.70 92 4 HF44210160 h
16 0/-0.030 2.00 +/-0.020 16 32 42 15.70 92 4 HF44220160 h
20 0/-0.030 1.00 +/-0.020 20 38 50 19.70 104 4 HF44210200 h
20 0/-0.030 2.00 +/-0.020 20 38 50 19.70 104 4 HF44220200 h
HF442
cylindrical shank and reduced neck, corner radius
OSAWA
NORM
PMKNSH
+++ +
+ 1st choice , suitable
SLOTTING
1.5D
SIDE MILLING
HELICAL RAMPING VERTICAL DRILLING
TROCHOIDAL
CR
CR
HF UNI - Variable Helix and unequal pitch - Corner radius
426
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
CUTTING PARAMETERS
HF442
SLOTTING
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
ap x ae D X D D x D 0.5D x D 0.5D x D
Vc (m/min) 110-130 70-90 50-70 30-50
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
312740 0.013 640 8490 0.011 390 6370 0.009 240 4250 0.009 150
49550 0.017 640 6370 0.015 380 4780 0.012 240 3180 0.012 150
57640 0.021 630 5100 0.019 380 3820 0.016 240 2550 0.014 150
66370 0.024 620 4250 0.022 370 3180 0.018 230 2120 0.017 140
84780 0.032 600 3180 0.028 360 2390 0.024 230 1590 0.022 140
10 3820 0.038 580 2550 0.034 350 1910 0.028 220 1270 0.026 130
12 3180 0.043 550 2120 0.039 330 1590 0.032 210 1060 0.030 130
14 2730 0.049 530 1820 0.044 320 1360 0.036 200 910 0.034 120
16 2390 0.054 520 1590 0.049 310 1190 0.041 190 800 0.038 120
20 1910 0.066 500 1270 0.059 300 960 0.049 190 640 0.046 120
ap x ae ≤ D5 0.5D x D 0.5D x D 0.25D x D 0.25D x D
SLOTTING
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm²
ap x ae 1.5D x D 1.5D x D
Vc (m/min) 85-105 55-75
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
83780 0.025 380 2590 0.023 230
10 3030 0.030 370 2070 0.027 230
12 2520 0.035 350 1730 0.031 220
14 2160 0.039 340 1480 0.035 210
16 1890 0.043 330 1290 0.039 200
20 1510 0.053 320 1040 0.047 200
SIDE MILLING
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
ap x ae 1.5D x 0.5D 1.5D x 0.5D 1.2D x 0.3D 1.2D x 0.3D
Vc (m/min) 130-150 90-110 60-80 40-60
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
314860 0.015 900 10620 0.014 580 7430 0.012 360 5310 0.017 350
411150 0.020 890 7960 0.018 570 5570 0.016 360 3980 0.022 350
58920 0.025 890 6370 0.022 570 4460 0.020 350 3180 0.027 350
67430 0.029 870 5310 0.026 560 3720 0.023 350 2650 0.032 340
85570 0.038 840 3980 0.034 540 2790 0.030 340 1990 0.042 330
10 4460 0.045 810 3180 0.041 520 2230 0.036 320 1590 0.050 320
12 3720 0.052 770 2650 0.047 490 1860 0.041 310 1330 0.057 300
14 3180 0.058 740 2270 0.052 480 1590 0.047 300 1140 0.064 290
16 2790 0.065 720 1990 0.058 460 1390 0.052 290 1000 0.071 290
20 2230 0.079 700 1590 0.071 450 1110 0.063 280 800 0.087 280
ap x ae ≤ D5 1.5D x 0.25D 1.5D x 0.25D 1.2D x 0.1D 1.2D x 0.1D
PARAMETERS SUGGESTED WITH HIGH POWER MILLING CHUCK AND STABLE MACHINING CONDITION
HF UNI - Variable Helix and unequal pitch - Corner radius
427
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
CUTTING PARAMETERS
HF442
HELICAL
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
_° x ae 5° x 0.4D 4° x 0.4D 3° x 0.4D 3° x 0.4D
Vc (m/min) 110-130 70-90 50-70 30-50
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
312740 0.009 470 8490 0.009 290 6370 0.008 193 4250 0.007 120
49550 0.012 465 6370 0.011 290 4780 0.010 191 3180 0.009 119
57640 0.015 460 5100 0.014 285 3820 0.012 190 2550 0.012 118
66370 0.018 450 4250 0.016 280 3180 0.015 186 2120 0.014 115
84780 0.023 440 3180 0.021 270 2390 0.019 181 1590 0.018 112
10 3820 0.028 420 2550 0.026 260 1910 0.023 173 1270 0.021 108
12 3180 0.031 400 2120 0.029 250 1590 0.026 165 1060 0.024 103
14 2730 0.035 385 1820 0.033 240 1360 0.029 159 910 0.027 99
16 2390 0.039 375 1590 0.037 235 1190 0.032 154 800 0.030 97
20 1910 0.048 365 1270 0.045 225 960 0.039 151 640 0.037 94
_° max ≤ D5 2° 2° 1° 1°
RAMPING
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
_° x ae 15° x D 10° x D 5° x D 5° x D
Vc (m/min) 100-120 60-80 45-65 30-40
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
65840 0.019 455 3720 0.018 265 2920 0.017 198 1860 0.023 174
84380 0.025 440 2790 0.023 260 2190 0.022 193 1390 0.030 168
10 3500 0.030 420 2230 0.028 250 1750 0.026 185 1110 0.036 161
12 2920 0.034 405 1860 0.032 235 1460 0.030 176 930 0.042 154
14 2500 0.039 390 1590 0.036 225 1250 0.034 170 800 0.047 149
16 2190 0.043 375 1390 0.040 220 1090 0.038 165 700 0.052 145
20 1750 0.052 365 1110 0.048 215 880 0.046 162 560 0.063 141
RAMPING
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm²
_° x ae 30° x D 15° x D
Vc (m/min) 80-100 45-65
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
10 2870 0.025 280 1750 0.023 160
12 2390 0.028 270 1460 0.026 150
14 2050 0.032 260 1250 0.029 145
16 1790 0.035 250 1090 0.032 140
20 1430 0.043 245 880 0.039 140
PARAMETERS SUGGESTED WITH HIGH POWER MILLING CHUCK AND STABLE MACHINING CONDITION
HF UNI - Variable Helix and unequal pitch - Corner radius
428
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
CUTTING PARAMETERS
HF442
VERTICAL
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
ap x ae D x 0.4D D x 0.4D D x 0.25D D x 0.25D
Vc (m/min) 100-120 60-80 45-65 30-40
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
65840 0.024 570 3720 0.022 330 2920 0.018 210 1860 0.017 130
84380 0.032 550 2790 0.028 320 2190 0.024 210 1390 0.022 120
10 3500 0.038 530 2230 0.034 300 1750 0.028 200 1110 0.026 120
12 2920 0.043 500 1860 0.039 290 1460 0.032 190 930 0.030 110
14 2500 0.049 490 1590 0.044 280 1250 0.036 180 800 0.034 110
16 2190 0.054 470 1390 0.049 270 1090 0.041 180 700 0.038 110
20 1750 0.066 460 1110 0.059 260 880 0.049 170 560 0.046 100
DRILLING
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
ap x ae D x D D x D 0.5D x D 0.5D x D
Vc (m/min) 85-105 55-75 40-60 20-40
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
310080 0.006 250 6900 0.006 160 5310 0.005 110 3180 0.007 90
47560 0.008 250 5180 0.007 160 3980 0.007 110 2390 0.009 90
56050 0.010 250 4140 0.009 150 3180 0.008 110 1910 0.011 90
65040 0.012 240 3450 0.011 150 2650 0.010 100 1590 0.013 90
83780 0.016 240 2590 0.014 150 1990 0.013 100 1190 0.017 80
10 3030 0.019 230 2070 0.017 140 1590 0.015 100 960 0.021 80
12 2520 0.022 220 1730 0.019 130 1330 0.017 90 800 0.024 80
14 2160 0.024 210 1480 0.022 130 1140 0.019 90 680 0.027 70
16 1890 0.027 200 1290 0.024 130 1000 0.022 90 600 0.030 70
20 1510 0.033 200 1040 0.030 120 800 0.026 80 480 0.036 70
ap x ae ≤ D5 0.5D x D 0.5D x D 0.25D x D 0.25D x D
PARAMETERS SUGGESTED WITH HIGH POWER MILLING CHUCK AND STABLE MACHINING CONDITION
HF UNI - Variable Helix and unequal pitch - Corner radius
429
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
CUTTING PARAMETERS
HF442
TROCHOIDAL
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
ap x ae 2D x 0.2D 2D x 0.1D 1.5D x 0.1D 1.5D x 0.1D
Vc (m/min) 160-200 110-130 80-100 50-70
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
310080 0.032 1270 6900 0.028 780 5310 0.025 540 3180 0.035 440
47560 0.042 1260 5180 0.037 780 3980 0.033 530 2390 0.046 440
56050 0.052 1250 4140 0.047 770 3180 0.041 530 1910 0.057 430
65040 0.061 1220 3450 0.055 750 2650 0.049 520 1590 0.067 430
83780 0.079 1190 2590 0.071 730 1990 0.063 500 1190 0.087 410
10 3030 0.095 1150 2070 0.085 700 1590 0.076 480 960 0.104 400
12 2520 0.108 1090 1730 0.097 670 1330 0.086 460 800 0.119 380
14 2160 0.122 1050 1480 0.109 650 1140 0.097 440 680 0.134 360
16 1890 0.135 1020 1290 0.122 630 1000 0.108 430 600 0.149 360
20 1510 0.164 990 1040 0.148 610 800 0.131 420 480 0.181 350
ap x ae ≤ D5 1.5D x 0.1D 1.5D x 0.1D
NOTES:
Down milling CNC programming is required.
“ae” value max 0.2xD - “T” value max 0.1xD.
The use of end mill with diameter 30-40% smaller than the width of the slot is recommended.
The cutting conditions are based on CNC programming with medium dynamic speed.
With lower CNC dynamic speed, use the same cutting conditions or reduce the cutting speed Vc.
With higher CNC dynamic speed, reduce the “T” value by approximately -30 -50% and apply the maximum available cutting speed Vc.
X (+)
Y (+) Y
R1 Cutter radius
R2 Half of slot width
T Programming width of cut
ae Actual width of cut
ae
T
R2
R1
PARAMETERS SUGGESTED WITH HIGH POWER MILLING CHUCK AND STABLE MACHINING CONDITION
HF UNI - Variable Helix and unequal pitch - Corner radius
430
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
h stock standard f non-standard stock m stock exhaustion
D D Tol. CR CR Tol. d(h6) l l1 d1 L z EDP No. Stock
30/-0.030 0.30 +/-0.020 6 9 15 2.80 57 4 HF44303030 h
30/-0.030 0.50 +/-0.020 6 9 15 2.80 57 4 HF44305030 h
40/-0.030 0.30 +/-0.020 6 11 18 3.80 57 4 HF44303040 h
40/-0.030 0.50 +/-0.020 6 11 18 3.80 57 4 HF44305040 h
50/-0.030 0.50 +/-0.020 6 13 19 4.80 57 4 HF44305050 h
60/-0.030 0.50 +/-0.020 6 13 20 5.80 57 4 HF44305060 h
60/-0.030 1.00 +/-0.020 6 13 20 5.80 57 4 HF44310060 h
80/-0.030 0.50 +/-0.020 8 20 26 7.80 64 4 HF44305080 h
80/-0.030 1.00 +/-0.020 8 20 26 7.80 64 4 HF44310080 h
10 0/-0.030 0.50 +/-0.020 10 22 30 9.80 72 4 HF44305100 h
10 0/-0.030 1.00 +/-0.020 10 22 30 9.80 72 4 HF44310100 h
12 0/-0.030 0.50 +/-0.020 12 26 36 11.80 83 4 HF44305120 h
12 0/-0.030 1.00 +/-0.020 12 26 36 11.80 83 4 HF44310120 h
14 0/-0.030 1.00 +/-0.020 14 26 36 13.70 83 4 HF44310140 h
16 0/-0.030 1.00 +/-0.020 16 32 42 15.70 92 4 HF44310160 h
20 0/-0.030 1.00 +/-0.020 20 38 50 19.70 104 4 HF44310200 h
HF443
weldon shank and reduced neck, corner radius
OSAWA
NORM
PMKNSH
+++ +
+ 1st choice , suitable
SLOTTING
2D
SIDE MILLING
HELICAL RAMPING VERTICAL DRILLING
TROCHOIDAL
CR
CR
HF UNI - Variable Helix and unequal pitch - Corner radius
431
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
CUTTING PARAMETERS
HF443
SLOTTING
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
ap x ae D X D D x D 0.5D x D 0.5D x D
Vc (m/min) 110-130 70-90 50-70 30-50
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
312740 0.013 640 8490 0.011 390 6370 0.009 240 4250 0.009 150
49550 0.017 640 6370 0.015 380 4780 0.012 240 3180 0.012 150
57640 0.021 630 5100 0.019 380 3820 0.016 240 2550 0.014 150
66370 0.024 620 4250 0.022 370 3180 0.018 230 2120 0.017 140
84780 0.032 600 3180 0.028 360 2390 0.024 230 1590 0.022 140
10 3820 0.038 580 2550 0.034 350 1910 0.028 220 1270 0.026 130
12 3180 0.043 550 2120 0.039 330 1590 0.032 210 1060 0.030 130
14 2730 0.049 530 1820 0.044 320 1360 0.036 200 910 0.034 120
16 2390 0.054 520 1590 0.049 310 1190 0.041 190 800 0.038 120
20 1910 0.066 500 1270 0.059 300 960 0.049 190 640 0.046 120
ap x ae ≤ D5 0.5D x D 0.5D x D 0.25D x D 0.25D x D
SLOTTING
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm²
ap x ae 1.5D x D 1.5D x D
Vc (m/min) 85-105 55-75
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
83780 0.025 380 2590 0.023 230
10 3030 0.030 370 2070 0.027 230
12 2520 0.035 350 1730 0.031 220
14 2160 0.039 340 1480 0.035 210
16 1890 0.043 330 1290 0.039 200
20 1510 0.053 320 1040 0.047 200
SLOTTING
Material Group
ISO 513 P1 P2 M1 K1
Hardness/Rm ≤ 700 N/mm²
ap x ae 2D x D
Vc (m/min) 60-80
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
10 2230 0.023 200
12 1860 0.026 190
14 1590 0.029 190
16 1390 0.032 180
20 1110 0.039 180
PARAMETERS SUGGESTED WITH HIGH PRECISION WELDON CHUCK AND STABLE MACHINING CONDITION.
FOR APPLICATION ON HIGH POWER MILLING CHUCK, PLEASE REFER TO HF442 PARAMETERS.
HF UNI - Variable Helix and unequal pitch - Corner radius
432
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
CUTTING PARAMETERS
HF443
SIDE MILLING
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
ap x ae 1.5D x 0.5D 1.5D x 0.5D 1.2D x 0.3D 1.2D x 0.3D
Vc (m/min) 130-150 90-110 60-80 40-60
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
314860 0.015 900 10620 0.014 580 7430 0.012 360 5310 0.017 350
411150 0.020 890 7960 0.018 570 5570 0.016 360 3980 0.022 350
58920 0.025 890 6370 0.022 570 4460 0.020 350 3180 0.027 350
67430 0.029 870 5310 0.026 560 3720 0.023 350 2650 0.032 340
85570 0.038 840 3980 0.034 540 2790 0.030 340 1990 0.042 330
10 4460 0.045 810 3180 0.041 520 2230 0.036 320 1590 0.050 320
12 3720 0.052 770 2650 0.047 490 1860 0.041 310 1330 0.057 300
14 3180 0.058 740 2270 0.052 480 1590 0.047 300 1140 0.064 290
16 2790 0.065 720 1990 0.058 460 1390 0.052 290 1000 0.071 290
20 2230 0.079 700 1590 0.071 450 1110 0.063 280 800 0.087 280
ap x ae ≤ D5 1.5D x 0.25D 1.5D x 0.25D 1.2D x 0.1D 1.2D x 0.1D
HELICAL
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
_° x ae 5° x 0.4D 4° x 0.4D 3° x 0.4D 3° x 0.4D
Vc (m/min) 110-130 70-90 50-70 30-50
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
312740 0.009 470 8490 0.009 290 6370 0.008 193 4250 0.007 120
49550 0.012 465 6370 0.011 290 4780 0.010 191 3180 0.009 119
57640 0.015 460 5100 0.014 285 3820 0.012 190 2550 0.012 118
66370 0.018 450 4250 0.016 280 3180 0.015 186 2120 0.014 115
84780 0.023 440 3180 0.021 270 2390 0.019 181 1590 0.018 112
10 3820 0.028 420 2550 0.026 260 1910 0.023 173 1270 0.021 108
12 3180 0.031 400 2120 0.029 250 1590 0.026 165 1060 0.024 103
14 2730 0.035 385 1820 0.033 240 1360 0.029 159 910 0.027 99
16 2390 0.039 375 1590 0.037 235 1190 0.032 154 800 0.030 97
20 1910 0.048 365 1270 0.045 225 960 0.039 151 640 0.037 94
_° max ≤ D5 2° 2° 1° 1°
RAMPING
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
_° x ae 15° x D 10° x D 5° x D 5° x D
Vc (m/min) 100-120 60-80 45-65 30-40
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
65840 0.019 455 3720 0.018 265 2920 0.017 198 1860 0.023 174
84380 0.025 440 2790 0.023 260 2190 0.022 193 1390 0.030 168
10 3500 0.030 420 2230 0.028 250 1750 0.026 185 1110 0.036 161
12 2920 0.034 405 1860 0.032 235 1460 0.030 176 930 0.042 154
14 2500 0.039 390 1590 0.036 225 1250 0.034 170 800 0.047 149
16 2190 0.043 375 1390 0.040 220 1090 0.038 165 700 0.052 145
20 1750 0.052 365 1110 0.048 215 880 0.046 162 560 0.063 141
PARAMETERS SUGGESTED WITH HIGH PRECISION WELDON CHUCK AND STABLE MACHINING CONDITION.
FOR APPLICATION ON HIGH POWER MILLING CHUCK, PLEASE REFER TO HF442 PARAMETERS.
HF UNI - Variable Helix and unequal pitch - Corner radius
433
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
CUTTING PARAMETERS
HF443
RAMPING
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
_° x ae 30° x D 15° x D
Vc (m/min) 85-105 55-75
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
10 2870 0.025 280 1750 0.023 160
12 2390 0.028 270 1460 0.026 150
14 2050 0.032 260 1250 0.029 145
16 1790 0.035 250 1090 0.032 140
20 1430 0.043 245 880 0.039 140
RAMPING
Material Group
ISO 513 P1 P2 M1 K1
Hardness/Rm ≤ 700 N/mm²
_° x ae 45° x D
Vc (m/min) 60-80
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
10 2070 0.024 200
12 1730 0.028 195
14 1480 0.031 185
16 1290 0.035 180
20 1040 0.042 175
VERTICAL
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
ap x ae D x 0.4D D x 0.4D D x 0.25D D x 0.25D
Vc (m/min) 100-120 60-80 45-65 30-40
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
65840 0.024 570 3720 0.022 330 2920 0.018 210 1860 0.017 130
84380 0.032 550 2790 0.028 320 2190 0.024 210 1390 0.022 120
10 3500 0.038 530 2230 0.034 300 1750 0.028 200 1110 0.026 120
12 2920 0.043 500 1860 0.039 290 1460 0.032 190 930 0.030 110
14 2500 0.049 490 1590 0.044 280 1250 0.036 180 800 0.034 110
16 2190 0.054 470 1390 0.049 270 1090 0.041 180 700 0.038 110
20 1750 0.066 460 1110 0.059 260 880 0.049 170 560 0.046 100
PARAMETERS SUGGESTED WITH HIGH PRECISION WELDON CHUCK AND STABLE MACHINING CONDITION.
FOR APPLICATION ON HIGH POWER MILLING CHUCK, PLEASE REFER TO HF442 PARAMETERS.
HF UNI - Variable Helix and unequal pitch - Corner radius
434
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
CUTTING PARAMETERS
HF443
DRILLING
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
ap x ae D x D D x D 0.5D x D 0.5D x D
Vc (m/min) 85-105 55-75 40-60 20-40
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
310080 0.006 250 6900 0.006 160 5310 0.005 110 3180 0.007 90
47560 0.008 250 5180 0.007 160 3980 0.007 110 2390 0.009 90
56050 0.010 250 4140 0.009 150 3180 0.008 110 1910 0.011 90
65040 0.012 240 3450 0.011 150 2650 0.010 100 1590 0.013 90
83780 0.016 240 2590 0.014 150 1990 0.013 100 1190 0.017 80
10 3030 0.019 230 2070 0.017 140 1590 0.015 100 960 0.021 80
12 2520 0.022 220 1730 0.019 130 1330 0.017 90 800 0.024 80
14 2160 0.024 210 1480 0.022 130 1140 0.019 90 680 0.027 70
16 1890 0.027 200 1290 0.024 130 1000 0.022 90 600 0.030 70
20 1510 0.033 200 1040 0.030 120 800 0.026 80 480 0.036 70
ap x ae ≤ D5 0.5D x D 0.5D x D 0.25D x D 0.25D x D
TROCHOIDAL
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
ap x ae 2D x 0.2D 2D x 0.1D 1.5D x 0.1D 1.5D x 0.1D
Vc (m/min) 160-200 110-130 80-100 50-70
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
310080 0.032 1270 6900 0.028 780 5310 0.025 540 3180 0.035 440
47560 0.042 1260 5180 0.037 780 3980 0.033 530 2390 0.046 440
56050 0.052 1250 4140 0.047 770 3180 0.041 530 1910 0.057 430
65040 0.061 1220 3450 0.055 750 2650 0.049 520 1590 0.067 430
83780 0.079 1190 2590 0.071 730 1990 0.063 500 1190 0.087 410
10 3030 0.095 1150 2070 0.085 700 1590 0.076 480 960 0.104 400
12 2520 0.108 1090 1730 0.097 670 1330 0.086 460 800 0.119 380
14 2160 0.122 1050 1480 0.109 650 1140 0.097 440 680 0.134 360
16 1890 0.135 1020 1290 0.122 630 1000 0.108 430 600 0.149 360
20 1510 0.164 990 1040 0.148 610 800 0.131 420 480 0.181 350
ap x ae ≤ D5 1.5D x 0.1D 1.5D x 0.1D
NOTES:
Down milling CNC programming is required.
“ae” value max 0.2xD - “T” value max 0.1xD.
The use of end mill with diameter 30-40% smaller than the width of the slot is recommended.
The cutting conditions are based on CNC programming with medium dynamic speed.
With lower CNC dynamic speed, use the same cutting conditions or reduce the cutting speed Vc.
With higher CNC dynamic speed, reduce the “T” value by approximately -30 -50% and apply the maximum available cutting speed Vc.
X (+)
Y (+) Y
R1 Cutter radius
R2 Half of slot width
T Programming width of cut
ae Actual width of cut
ae
T
R2
R1
PARAMETERS SUGGESTED WITH HIGH PRECISION WELDON CHUCK AND STABLE MACHINING CONDITION.
FOR APPLICATION ON HIGH POWER MILLING CHUCK, PLEASE REFER TO HF442 PARAMETERS.
HF UNI - Variable Helix and unequal pitch - Corner radius
435
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
h stock standard f non-standard stock m stock exhaustion
D D Tol. CR CR Tol. d(h6) l l1 d1 L z EDP No. Stock
60/-0.030 0.30 +/-0.010 6 12 30 5.80 75 4 HF5420306075 h
60/-0.030 0.50 +/-0.010 6 12 30 5.80 75 4 HF5420506075 h
60/-0.030 1.00 +/-0.010 6 12 30 5.80 75 4 HF5421006075 h
60/-0.030 0.30 +/-0.010 6 12 30 5.80 100 4 HF54203060100 h
60/-0.030 0.50 +/-0.010 6 12 30 5.80 100 4 HF54205060100 h
60/-0.030 1.00 +/-0.010 6 12 30 5.80 100 4 HF54210060100 h
80/-0.030 0.50 +/-0.010 8 16 40 7.80 100 4 HF54205080100 h
80/-0.030 1.00 +/-0.010 8 16 40 7.80 100 4 HF54210080100 h
80/-0.030 2.00 +/-0.010 8 16 40 7.80 100 4 HF54220080100 h
10 0/-0.030 0.50 +/-0.010 10 20 50 9.80 125 4 HF54205100125 h
10 0/-0.030 1.00 +/-0.010 10 20 50 9.80 125 4 HF54210100125 h
10 0/-0.030 2.00 +/-0.010 10 20 50 9.80 125 4 HF54220100125 h
12 0/-0.030 0.50 +/-0.010 12 24 60 11.80 125 4 HF54205120125 h
12 0/-0.030 1.00 +/-0.010 12 24 60 11.80 125 4 HF54210120125 h
12 0/-0.030 2.00 +/-0.010 12 24 60 11.80 125 4 HF54220120125 h
12 0/-0.030 3.00 +/-0.010 12 24 60 11.80 125 4 HF54230120125 h
12 0/-0.030 0.50 +/-0.010 12 24 60 11.80 150 4 HF54205120150 h
12 0/-0.030 1.00 +/-0.010 12 24 60 11.80 150 4 HF54210120150 h
12 0/-0.030 2.00 +/-0.010 12 24 60 11.80 150 4 HF54220120150 h
12 0/-0.030 3.00 +/-0.010 12 24 60 11.80 150 4 HF54230120150 h
16 0/-0.030 0.50 +/-0.010 16 32 80 15.70 150 4 HF54205160150 h
16 0/-0.030 1.00 +/-0.010 16 32 80 15.70 150 4 HF54210160150 h
16 0/-0.030 2.00 +/-0.010 16 32 80 15.70 150 4 HF54220160150 h
16 0/-0.030 3.00 +/-0.010 16 32 80 15.70 150 4 HF54230160150 h
16 0/-0.030 4.00 +/-0.010 16 32 80 15.70 150 4 HF54240160150 h
20 0/-0.030 0.50 +/-0.010 20 40 100 19.70 150 4 HF54205200150 h
20 0/-0.030 1.00 +/-0.010 20 40 100 19.70 150 4 HF54210200150 h
20 0/-0.030 2.00 +/-0.010 20 40 100 19.70 150 4 HF54220200150 h
20 0/-0.030 3.00 +/-0.010 20 40 100 19.70 150 4 HF54230200150 h
20 0/-0.030 4.00 +/-0.010 20 40 100 19.70 150 4 HF54240200150 h
HF542
cylindrical shank and reduced neck, long reach,
corner radius
OSAWA
NORM
PMKNSH
+++ +
+ 1st choice , suitable
SLOTTING
SIDE MILLING
HELICAL RAMPING VERTICAL DRILLING
TROCHOIDAL
CR
CR
HF UNI - Variable Helix and unequal pitch - Corner radius
436
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
CUTTING PARAMETERS
HF542
SLOTTING
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
ap x ae 0.5D x D 0.3D x D 0.2D x D 0.2D x D
Vc (m/min) 90-110 60-80 40-60 20-40
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
65310 0.019 410 3720 0.017 260 2650 0.015 150 1590 0.014 90
83980 0.025 400 2790 0.023 250 1990 0.019 150 1190 0.018 80
10 3180 0.030 380 2230 0.027 240 1590 0.023 140 960 0.021 80
12 2650 0.035 370 1860 0.031 230 1330 0.026 140 800 0.024 80
16 1990 0.043 340 1390 0.039 220 1000 0.032 130 600 0.030 70
20 1590 0.053 330 1110 0.047 210 800 0.039 130 480 0.037 70
SIDE MILLING
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
ap x ae 1.5D x 0.3D 1.5D x 0.3D 1.2D x 0.2D 1.2D x 0.2D
Vc (m/min) 110-130 70-90 50-70 30-50
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
66370 0.023 590 4250 0.021 360 3180 0.019 240 2120 0.026 220
84780 0.030 580 3180 0.027 350 2390 0.024 230 1590 0.033 210
10 3820 0.036 550 2550 0.033 330 1910 0.029 220 1270 0.040 200
12 3180 0.041 530 2120 0.037 320 1590 0.033 210 1060 0.046 190
16 2390 0.052 500 1590 0.047 300 1190 0.041 200 800 0.057 180
20 1910 0.063 480 1270 0.057 290 960 0.050 190 640 0.069 180
HELICAL
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
_° x ae 4° x 0.4D 3° x 0.4D 3° x 0.4D 2° x 0.4D
Vc (m/min) 90-110 60-80 40-60 20-40
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
65310 0.015 310 3720 0.014 210 2650 0.012 124 1590 0.012 78
83980 0.019 305 2790 0.018 205 1990 0.015 120 1190 0.016 76
10 3180 0.023 290 2230 0.022 195 1590 0.018 115 960 0.019 73
12 2650 0.026 275 1860 0.025 185 1330 0.021 110 800 0.022 70
16 1990 0.033 260 1390 0.031 175 1000 0.026 104 600 0.027 66
20 1590 0.040 250 1110 0.038 170 800 0.032 101 480 0.033 64
RAMPING
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
_° x ae 7° x 0.4D 5° x 0.4D 3° x 0.4D 3° x 0.4D
Vc (m/min) 80-100 50-70 35-55 20-30
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
64780 0.016 310 3180 0.015 195 2390 0.015 143 1330 0.021 109
83580 0.021 305 2390 0.020 190 1790 0.019 139 1000 0.027 107
10 2870 0.025 290 1910 0.024 180 1430 0.023 133 800 0.032 102
12 2390 0.029 275 1590 0.027 175 1190 0.027 126 660 0.037 96
16 1790 0.036 260 1190 0.034 160 900 0.033 120 500 0.046 91
20 1430 0.044 250 960 0.041 160 720 0.040 116 400 0.056 89
PARAMETERS SUGGESTED WITH HIGH POWER MILLING CHUCK AND STABLE MACHINING CONDITION
HF UNI - Variable Helix and unequal pitch - Corner radius
437
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
CUTTING PARAMETERS
HF542
VERTICAL
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
ap x ae D x 0.4D D x 0.4D D x 0.25D D x 0.25D
Vc (m/min) 80-100 50-70 35-55 20-30
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
64780 0.019 370 3180 0.017 220 2390 0.015 140 1330 0.014 70
83580 0.025 360 2390 0.023 220 1790 0.019 140 1000 0.018 70
10 2870 0.030 350 1910 0.027 210 1430 0.023 130 800 0.021 70
12 2390 0.035 330 1590 0.031 200 1190 0.026 120 660 0.024 60
16 1790 0.043 310 1190 0.039 190 900 0.032 120 500 0.030 60
20 1430 0.053 300 960 0.047 180 720 0.039 110 400 0.037 60
DRILLING
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
ap x ae D x D D x D 0.5D x D 0.5D x D
Vc (m/min) 85-105 55-75 40-60 20-40
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
64250 0.010 170 2920 0.009 100 2120 0.008 70 1330 0.011 60
83180 0.013 160 2190 0.011 100 1590 0.010 60 1000 0.014 60
10 2550 0.015 150 1750 0.014 100 1270 0.012 60 800 0.017 50
12 2120 0.017 150 1460 0.016 90 1060 0.014 60 660 0.019 50
16 1590 0.022 140 1090 0.019 80 800 0.017 60 500 0.024 50
20 1270 0.026 130 880 0.024 80 640 0.021 50 400 0.029 50
TROCHOIDAL
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
ap x ae 2D x 0.1D 2D x 0.1D 1.5D x 0.1D 1.5D x 0.1D
Vc (m/min) 160-200 110-130 80-100 50-70
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
64250 0.049 830 2920 0.044 510 2120 0.039 330 1330 0.053 280
83180 0.063 800 2190 0.057 500 1590 0.050 320 1000 0.069 280
10 2550 0.076 770 1750 0.068 480 1270 0.060 310 800 0.083 270
12 2120 0.086 730 1460 0.078 450 1060 0.069 290 660 0.095 250
16 1590 0.108 690 1090 0.097 420 800 0.086 280 500 0.119 240
20 1270 0.131 670 880 0.118 420 640 0.105 270 400 0.145 230
NOTES:
Down milling CNC programming is required.
“ae” value max 0.2xD - “T” value max 0.1xD.
The use of end mill with diameter 30-40% smaller than the width of the slot is recommended.
The cutting conditions are based on CNC programming with medium dynamic speed.
With lower CNC dynamic speed, use the same cutting conditions or reduce the cutting speed Vc.
With higher CNC dynamic speed, reduce the “T” value by approximately -30 -50% and apply the maximum available cutting speed Vc.
X (+)
Y (+) Y
R1 Cutter radius
R2 Half of slot width
T Programming width of cut
ae Actual width of cut
ae
T
R2
R1
PARAMETERS SUGGESTED WITH HIGH POWER MILLING CHUCK AND STABLE MACHINING CONDITION
HF UNI - Variable Helix and unequal pitch - Corner radius
438
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
h stock standard f non-standard stock m stock exhaustion
D D Tol. CR CR Tol. d(h6) l l1 L z EDP No. Stock
40/-0.025 0.10 +/-0.010 6 19 75 4 HF9420104075 h
50/-0.025 0.10 +/-0.010 6 19 75 4 HF9420105075 h
60/-0.025 0.10 +/-0.010 6 25 75 4 HF9420106075 h
80/-0.030 0.20 +/-0.010 8 30 75 4 HF9420208075 h
10 0/-0.030 0.20 +/-0.010 10 40 100 4 HF94202100100 h
12 0/-0.030 0.30 +/-0.010 12 45 100 4 HF94203120100 h
16 0/-0.030 0.30 +/-0.010 16 65 125 4 HF94203160125 h
20 0/-0.030 0.30 +/-0.010 20 65 125 4 HF94203200125 h
HF942
cylindrical shank, long cutting edge ideal for
trochoidal milling, corner radius
OSAWA
NORM
PMKNSH
+++ +
+ 1st choice , suitable
SIDE MILLING
HELICAL RAMPING VERTICAL DRILLING
TROCHOIDAL
CR
CR
HF UNI - Variable Helix and unequal pitch - Corner radius
439
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
CUTTING PARAMETERS
HF942
SIDE MILLING
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
ap x ae 1.5D x 0.3D 1.5D x 0.3D 1.2D x 0.2D 1.2D x 0.2D
Vc (m/min) 110-130 70-90 50-70 30-50
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
49550 0.016 620 6370 0.015 370 4780 0.013 250 3180 0.018 230
57640 0.021 650 5100 0.019 390 3820 0.017 260 2550 0.023 240
66370 0.026 660 4250 0.023 400 3180 0.021 260 2120 0.029 240
84780 0.031 590 3180 0.028 350 2390 0.025 230 1590 0.034 210
10 3820 0.036 560 2550 0.033 330 1910 0.029 220 1270 0.040 200
12 3180 0.041 530 2120 0.037 320 1590 0.033 210 1060 0.045 190
16 2390 0.047 450 1590 0.042 270 1190 0.038 180 800 0.052 170
20 1910 0.063 480 1270 0.057 290 960 0.051 190 640 0.070 180
ap x ae ≤ D5 1.5D x 0.1D 1.5D x 0.1D 1.2D x 0.1D 1.2D x 0.1D
HELICAL
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
_° x ae 4° x 0.4D 3° x 0.4D 3° x 0.4D 2° x 0.4D
Vc (m/min) 90-110 60-80 40-60 20-40
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
47960 0.010 325 5570 0.010 220 3980 0.008 130 2390 0.009 82
56370 0.013 340 4460 0.013 225 3180 0.011 134 1910 0.011 85
65310 0.016 345 3720 0.016 230 2650 0.013 137 1590 0.014 87
83980 0.019 305 2790 0.018 205 1990 0.015 122 1190 0.016 77
10 3180 0.023 290 2230 0.022 195 1590 0.018 116 960 0.019 74
12 2650 0.026 275 1860 0.025 185 1330 0.021 110 800 0.022 70
16 1990 0.030 235 1390 0.028 155 1000 0.024 94 600 0.025 59
20 1590 0.040 255 1110 0.038 170 800 0.032 101 480 0.033 64
_° max ≤ D5 2° 2° 1° 1°
PARAMETERS SUGGESTED WITH HIGH POWER MILLING CHUCK AND STABLE MACHINING CONDITION
HF UNI - Variable Helix and unequal pitch - Corner radius
440
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
CUTTING PARAMETERS
HF942
RAMPING
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
_° x ae 5° x 0.4D 5° x 0.4D 3° x 0.4D 3° x 0.4D
Vc (m/min) 80-100 50-70 35-55 20-30
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
47170 0.012 340 4780 0.011 205 3580 0.010 150 1990 0.014 114
55730 0.015 350 3820 0.014 210 2870 0.014 155 1590 0.019 118
64780 0.019 360 3180 0.017 215 2390 0.017 159 1330 0.023 121
83580 0.022 320 2390 0.020 190 1790 0.020 141 1000 0.027 108
10 2870 0.027 305 1910 0.024 185 1430 0.023 134 800 0.032 103
12 2390 0.030 285 1590 0.027 170 1190 0.026 126 660 0.036 96
16 1790 0.034 245 1190 0.031 145 900 0.030 108 500 0.041 83
20 1430 0.046 265 960 0.042 160 720 0.041 117 400 0.056 89
VERTICAL
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
ap x ae D x 0.4D D x 0.4D D x 0.25D D x 0.25D
Vc (m/min) 80-100 50-70 35-55 20-30
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
47170 0.014 390 4780 0.012 230 3580 0.010 150 1990 0.010 80
55730 0.018 400 3820 0.016 240 2870 0.013 150 1590 0.012 80
64780 0.022 410 3180 0.019 250 2390 0.016 150 1330 0.015 80
83580 0.026 370 2390 0.023 220 1790 0.019 140 1000 0.018 70
10 2870 0.030 350 1910 0.027 210 1430 0.023 130 800 0.021 70
12 2390 0.034 330 1590 0.031 200 1190 0.026 120 660 0.024 60
16 1790 0.039 280 1190 0.035 170 900 0.029 110 500 0.027 50
20 1430 0.053 300 960 0.048 180 720 0.040 110 400 0.037 60
DRILLING
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
ap x ae D x D D x D 0.5D x D 0.5D x D
Vc (m/min) 85-105 55-75 40-60 20-40
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
46370 0.007 170 4380 0.006 110 3180 0.005 70 1990 0.007 60
55100 0.009 180 3500 0.008 110 2550 0.007 70 1590 0.010 60
64250 0.011 180 2920 0.010 110 2120 0.009 70 1330 0.012 60
83180 0.013 160 2190 0.012 100 1590 0.010 70 1000 0.014 60
10 2550 0.015 160 1750 0.014 100 1270 0.012 60 800 0.017 50
12 2120 0.017 150 1460 0.015 90 1060 0.014 60 660 0.019 50
16 1590 0.020 120 1090 0.018 80 800 0.016 50 500 0.022 40
20 1270 0.026 130 880 0.024 80 640 0.021 50 400 0.029 50
ap x ae ≤ D5 0.5D x D 0.5D x D 0.25D x D 0.25D x D
PARAMETERS SUGGESTED WITH HIGH POWER MILLING CHUCK AND STABLE MACHINING CONDITION
HF UNI - Variable Helix and unequal pitch - Corner radius
441
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
CUTTING PARAMETERS
HF942
TROCHOIDAL
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
ap x ae 2D x 0.1D 2D x 0.1D 1.5D x 0.1D 1.5D x 0.1D
Vc (m/min) 160-200 110-130 80-100 50-70
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
46370 0.034 870 4380 0.031 540 3180 0.027 350 1990 0.037 300
55100 0.044 900 3500 0.040 550 2550 0.035 360 1590 0.048 310
64250 0.054 920 2920 0.049 570 2120 0.043 370 1330 0.059 320
83180 0.064 810 2190 0.058 500 1590 0.051 330 1000 0.070 280
10 2550 0.076 780 1750 0.068 480 1270 0.061 310 800 0.084 270
12 2120 0.086 730 1460 0.077 450 1060 0.069 290 660 0.095 250
16 1590 0.098 620 1090 0.088 380 800 0.078 250 500 0.108 220
20 1270 0.132 670 880 0.119 420 640 0.106 270 400 0.145 230
ap x ae ≤ D5 1.5D x 0.1D 1.5D x 0.1D 1.2D x 0.05D 1.2D x 0.05D
NOTES:
Down milling CNC programming is required.
“ae” value max 0.2xD - “T” value max 0.1xD.
The use of end mill with diameter 30-40% smaller than the width of the slot is recommended.
The cutting conditions are based on CNC programming with medium dynamic speed.
With lower CNC dynamic speed, use the same cutting conditions or reduce the cutting speed Vc.
With higher CNC dynamic speed, reduce the “T” value by approximately -30 -50% and apply the maximum available cutting speed Vc.
X (+)
Y (+) Y
R1 Cutter radius
R2 Half of slot width
T Programming width of cut
ae Actual width of cut
ae
T
R2
R1
PARAMETERS SUGGESTED WITH HIGH POWER MILLING CHUCK AND STABLE MACHINING CONDITION
HF UNI - Variable Helix and unequal pitch - Corner radius
442
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
h stock standard f non-standard stock m stock exhaustion
D D Tol. CR CR Tol. d(h6) l l1 L z EDP No. Stock
40/-0.025 0.10 +/-0.010 6 19 75 4 HF9430104075 h
50/-0.025 0.10 +/-0.010 6 19 75 4 HF9430105075 h
60/-0.025 0.10 +/-0.010 6 25 75 4 HF9430106075 h
80/-0.030 0.20 +/-0.010 8 30 75 4 HF9430208075 h
10 0/-0.030 0.20 +/-0.010 10 40 100 4 HF94302100100 h
12 0/-0.030 0.30 +/-0.010 12 45 100 4 HF94303120100 h
16 0/-0.030 0.30 +/-0.010 16 65 125 4 HF94303160125 h
20 0/-0.030 0.30 +/-0.010 20 65 125 4 HF94303200125 h
HF943
weldon shank, long cutting edge ideal for
trochoidal milling, corner radius
OSAWA
NORM
PMKNSH
+++ +
+ 1st choice , suitable
SIDE MILLING
HELICAL RAMPING VERTICAL DRILLING
TROCHOIDAL
CR
CR
HF UNI - Variable Helix and unequal pitch - Corner radius
443
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
CUTTING PARAMETERS
HF943
SIDE MILLING
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
ap x ae 1.5D x 0.3D 1.5D x 0.3D 1.2D x 0.2D 1.2D x 0.2D
Vc (m/min) 110-130 70-90 50-70 30-50
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
49550 0.016 620 6370 0.015 370 4780 0.013 250 3180 0.018 230
57640 0.021 650 5100 0.019 390 3820 0.017 260 2550 0.023 240
66370 0.026 660 4250 0.023 400 3180 0.021 260 2120 0.029 240
84780 0.031 590 3180 0.028 350 2390 0.025 230 1590 0.034 210
10 3820 0.036 560 2550 0.033 330 1910 0.029 220 1270 0.040 200
12 3180 0.041 530 2120 0.037 320 1590 0.033 210 1060 0.045 190
16 2390 0.047 450 1590 0.042 270 1190 0.038 180 800 0.052 170
20 1910 0.063 480 1270 0.057 290 960 0.051 190 640 0.070 180
ap x ae ≤ D5 1.5D x 0.1D 1.5D x 0.1D 1.2D x 0.1D 1.2D x 0.1D
HELICAL
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
_° x ae 4° x 0.4D 3° x 0.4D 3° x 0.4D 2° x 0.4D
Vc (m/min) 90-110 60-80 40-60 20-40
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
47960 0.010 325 5570 0.010 220 3980 0.008 130 2390 0.009 82
56370 0.013 340 4460 0.013 225 3180 0.011 134 1910 0.011 85
65310 0.016 345 3720 0.016 230 2650 0.013 137 1590 0.014 87
83980 0.019 305 2790 0.018 205 1990 0.015 122 1190 0.016 77
10 3180 0.023 290 2230 0.022 195 1590 0.018 116 960 0.019 74
12 2650 0.026 275 1860 0.025 185 1330 0.021 110 800 0.022 70
16 1990 0.030 235 1390 0.028 155 1000 0.024 94 600 0.025 59
20 1590 0.040 255 1110 0.038 170 800 0.032 101 480 0.033 64
_° max ≤ D5 2° 2° 1° 1°
PARAMETERS SUGGESTED WITH HIGH PRECISION WELDON CHUCK AND STABLE MACHINING CONDITION.
FOR APPLICATION ON HIGH POWER MILLING CHUCK, PLEASE REFER TO HF942 PARAMETERS.
HF UNI - Variable Helix and unequal pitch - Corner radius
444
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
CUTTING PARAMETERS
HF943
RAMPING
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
_° x ae 5° x 0.4D 5° x 0.4D 3° x 0.4D 3° x 0.4D
Vc (m/min) 80-100 50-70 35-55 20-30
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
47170 0.012 340 4780 0.011 205 3580 0.010 150 1990 0.014 114
55730 0.015 350 3820 0.014 210 2870 0.014 155 1590 0.019 118
64780 0.019 360 3180 0.017 215 2390 0.017 159 1330 0.023 121
83580 0.022 320 2390 0.020 190 1790 0.020 141 1000 0.027 108
10 2870 0.027 305 1910 0.024 185 1430 0.023 134 800 0.032 103
12 2390 0.030 285 1590 0.027 170 1190 0.026 126 660 0.036 96
16 1790 0.034 245 1190 0.031 145 900 0.030 108 500 0.041 83
20 1430 0.046 265 960 0.042 160 720 0.041 117 400 0.056 89
VERTICAL
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
ap x ae D x 0.4D D x 0.4D D x 0.25D D x 0.25D
Vc (m/min) 80-100 50-70 35-55 20-30
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
47170 0.014 390 4780 0.012 230 3580 0.010 150 1990 0.010 80
55730 0.018 400 3820 0.016 240 2870 0.013 150 1590 0.012 80
64780 0.022 410 3180 0.019 250 2390 0.016 150 1330 0.015 80
83580 0.026 370 2390 0.023 220 1790 0.019 140 1000 0.018 70
10 2870 0.030 350 1910 0.027 210 1430 0.023 130 800 0.021 70
12 2390 0.034 330 1590 0.031 200 1190 0.026 120 660 0.024 60
16 1790 0.039 280 1190 0.035 170 900 0.029 110 500 0.027 50
20 1430 0.053 300 960 0.048 180 720 0.040 110 400 0.037 60
DRILLING
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
ap x ae D x D D x D 0.5D x D 0.5D x D
Vc (m/min) 85-105 55-75 40-60 20-40
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
46370 0.007 170 4380 0.006 110 3180 0.005 70 1990 0.007 60
55100 0.009 180 3500 0.008 110 2550 0.007 70 1590 0.010 60
64250 0.011 180 2920 0.010 110 2120 0.009 70 1330 0.012 60
83180 0.013 160 2190 0.012 100 1590 0.010 70 1000 0.014 60
10 2550 0.015 160 1750 0.014 100 1270 0.012 60 800 0.017 50
12 2120 0.017 150 1460 0.015 90 1060 0.014 60 660 0.019 50
16 1590 0.020 120 1090 0.018 80 800 0.016 50 500 0.022 40
20 1270 0.026 130 880 0.024 80 640 0.021 50 400 0.029 50
ap x ae ≤ D5 0.5D x D 0.5D x D 0.25D x D 0.25D x D
PARAMETERS SUGGESTED WITH HIGH PRECISION WELDON CHUCK AND STABLE MACHINING CONDITION.
FOR APPLICATION ON HIGH POWER MILLING CHUCK, PLEASE REFER TO HF942 PARAMETERS.
HF UNI - Variable Helix and unequal pitch - Corner radius
445
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
CUTTING PARAMETERS
HF943
TROCHOIDAL
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
ap x ae 2D x 0.1D 2D x 0.1D 1.5D x 0.1D 1.5D x 0.1D
Vc (m/min) 160-200 110-130 80-100 50-70
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
46370 0.034 870 4380 0.031 540 3180 0.027 350 1990 0.037 300
55100 0.044 900 3500 0.040 550 2550 0.035 360 1590 0.048 310
64250 0.054 920 2920 0.049 570 2120 0.043 370 1330 0.059 320
83180 0.064 810 2190 0.058 500 1590 0.051 330 1000 0.070 280
10 2550 0.076 780 1750 0.068 480 1270 0.061 310 800 0.084 270
12 2120 0.086 730 1460 0.077 450 1060 0.069 290 660 0.095 250
16 1590 0.098 620 1090 0.088 380 800 0.078 250 500 0.108 220
20 1270 0.132 670 880 0.119 420 640 0.106 270 400 0.145 230
ap x ae ≤ D5 1.5D x 0.1D 1.5D x 0.1D 1.2D x 0.05D 1.2D x 0.05D
NOTES:
Down milling CNC programming is required.
“ae” value max 0.2xD - “T” value max 0.1xD.
The use of end mill with diameter 30-40% smaller than the width of the slot is recommended.
The cutting conditions are based on CNC programming with medium dynamic speed.
With lower CNC dynamic speed, use the same cutting conditions or reduce the cutting speed Vc.
With higher CNC dynamic speed, reduce the “T” value by approximately -30 -50% and apply the maximum available cutting speed Vc.
X (+)
Y (+) Y
R1 Cutter radius
R2 Half of slot width
T Programming width of cut
ae Actual width of cut
ae
T
R2
R1
PARAMETERS SUGGESTED WITH HIGH PRECISION WELDON CHUCK AND STABLE MACHINING CONDITION.
FOR APPLICATION ON HIGH POWER MILLING CHUCK, PLEASE REFER TO HF942 PARAMETERS.
HF UNI - Variable helix - Corner radius
446
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
h stock standard f non-standard stock m stock exhaustion
D D Tol. CR CR Tol. d(h6) l l1 L z EDP No. Stock
40/-0.025 0.10 +/-0.010 6 12 57 5 HF64201040 h
50/-0.025 0.10 +/-0.010 6 13 57 5 HF64201050 h
60/-0.025 0.10 +/-0.010 6 13 57 5 HF64201060 h
80/-0.030 0.20 +/-0.010 8 20 64 5 HF64202080 h
10 0/-0.030 0.20 +/-0.010 10 22 72 5 HF64202100 h
12 0/-0.030 0.30 +/-0.010 12 26 83 5 HF64203120 h
16 0/-0.030 0.30 +/-0.010 16 32 92 5 HF64203160 h
20 0/-0.030 0.30 +/-0.010 20 38 104 5 HF64203200 h
HF642
cylindrical shank, 5F ideal for trochoidal milling, corner radius
OSAWA
NORM
PMKNSH
+++ +
+ 1st choice , suitable
SIDE MILLING
HELICAL RAMPING VERTICAL
TROCHOIDAL
CR
CR
HF UNI - Variable helix - Corner radius
447
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
CUTTING PARAMETERS
HF642
SIDE MILLING
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
ap x ae 1.5D x 0.5D 1.5D x 0.5D 1.2D x 0.3D 1.2D x 0.3D
Vc (m/min) 160-180 100-120 70-90 40-60
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
413540 0.019 1280 8760 0.017 740 6370 0.015 480 3980 0.021 410
510830 0.023 1270 7010 0.021 740 5100 0.019 480 3180 0.026 410
69020 0.028 1240 5840 0.025 720 4250 0.022 470 2650 0.030 400
86770 0.036 1210 4380 0.032 700 3180 0.029 450 1990 0.039 390
10 5410 0.043 1160 3500 0.039 670 2550 0.034 440 1590 0.047 370
12 4510 0.049 1100 2920 0.044 640 2120 0.039 420 1330 0.054 360
16 3380 0.061 1030 2190 0.055 600 1590 0.049 390 1000 0.067 340
20 2710 0.074 1010 1750 0.067 590 1270 0.060 380 800 0.082 330
ap x ae ≤ D5 1.5D x 0.3D 1.5D x 0.3D 1.2D x 0.2D 1.2D x 0.2D
HELICAL
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
_° x ae 5° x 0.4D 4° x 0.4D 3° x 0.4D 3° x 0.4D
Vc (m/min) 130-150 80-100 60-80 30-50
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
411150 0.011 640 7170 0.011 385 5570 0.009 263 3180 0.009 140
58920 0.014 635 5730 0.013 380 4460 0.012 262 2550 0.011 140
67430 0.017 620 4780 0.016 370 3720 0.014 256 2120 0.013 136
85570 0.022 605 3580 0.020 360 2790 0.018 249 1590 0.017 133
10 4460 0.026 580 2870 0.024 350 2230 0.021 239 1270 0.020 127
12 3720 0.030 555 2390 0.028 330 1860 0.024 228 1060 0.023 121
16 2790 0.037 520 1790 0.035 310 1390 0.031 213 800 0.029 114
20 2230 0.045 505 1430 0.042 300 1110 0.037 207 640 0.035 111
_° max ≤ D5 2° 2° 1° 1°
PARAMETERS SUGGESTED WITH HIGH POWER MILLING CHUCK AND STABLE MACHINING CONDITION
HF UNI - Variable helix - Corner radius
448
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
CUTTING PARAMETERS
HF642
RAMPING
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
_° x ae 15° x D 10° x D 5° x D 5° x D
Vc (m/min) 130-150 80-100 60-80 30-50
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
67430 0.018 680 4780 0.017 405 3720 0.016 298 2120 0.022 234
85570 0.024 660 3580 0.022 390 2790 0.021 290 1590 0.029 227
10 4460 0.028 635 2870 0.026 375 2230 0.025 278 1270 0.034 218
12 3720 0.033 605 2390 0.030 360 1860 0.029 265 1060 0.039 208
16 2790 0.041 570 1790 0.037 335 1390 0.036 248 800 0.049 196
20 2230 0.050 550 1430 0.046 325 1110 0.043 241 640 0.060 191
VERTICAL
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
ap x ae D x 0.4D D x 0.4D D x 0.25D D x 0.25D
Vc (m/min) 130-150 80-100 60-80 30-50
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
67430 0.023 850 4780 0.021 490 3720 0.017 320 2120 0.016 170
85570 0.030 830 3580 0.027 480 2790 0.022 310 1590 0.021 170
10 4460 0.036 800 2870 0.032 460 2230 0.027 300 1270 0.025 160
12 3720 0.041 760 2390 0.037 440 1860 0.031 280 1060 0.029 150
16 2790 0.051 710 1790 0.046 410 1390 0.038 270 800 0.036 140
20 2230 0.062 690 1430 0.056 400 1110 0.047 260 640 0.043 140
TROCHOIDAL
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
ap x ae 2D x 0.2D 2D x 0.1D 1.5D x 0.1D 1.5D x 0.1D
Vc (m/min) 190-230 130-150 100-120 50-70
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
65840 0.057 1680 3720 0.052 960 2920 0.046 670 1590 0.063 500
84380 0.074 1630 2790 0.067 930 2190 0.060 650 1190 0.082 490
10 3500 0.089 1560 2230 0.080 900 1750 0.071 620 960 0.098 470
12 2920 0.102 1490 1860 0.092 850 1460 0.082 600 800 0.112 450
16 2190 0.128 1400 1390 0.115 800 1090 0.102 560 600 0.140 420
20 1750 0.155 1360 1110 0.140 770 880 0.124 550 480 0.171 410
ap x ae ≤ D5 1.5D x 0.1D 1.5D x 0.1D D x 0.1D D x 0.1D
NOTES:
Down milling CNC programming is required.
“ae” value max 0.2xD - “T” value max 0.1xD.
The use of end mill with diameter 30-40% smaller than the width of the slot is recommended.
The cutting conditions are based on CNC programming with medium dynamic speed.
With lower CNC dynamic speed, use the same cutting conditions or reduce the cutting speed Vc.
With higher CNC dynamic speed, reduce the “T” value by approximately -30 -50% and apply the maximum available cutting speed Vc.
X (+)
Y (+) Y
R1 Cutter radius
R2 Half of slot width
T Programming width of cut
ae Actual width of cut
ae
T
R2
R1
PARAMETERS SUGGESTED WITH HIGH POWER MILLING CHUCK AND STABLE MACHINING CONDITION
HF UNI - Variable helix - Corner radius
449
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
h stock standard f non-standard stock m stock exhaustion
D D Tol. CR CR Tol. d(h6) l l1 L z EDP No. Stock
40/-0.025 0.10 +/-0.010 6 12 57 5 HF64301040 h
50/-0.025 0.10 +/-0.010 6 13 57 5 HF64301050 h
60/-0.025 0.10 +/-0.010 6 13 57 5 HF64301060 h
80/-0.030 0.20 +/-0.010 8 20 64 5 HF64302080 h
10 0/-0.030 0.20 +/-0.010 10 22 72 5 HF64302100 h
12 0/-0.030 0.30 +/-0.010 12 26 83 5 HF64303120 h
16 0/-0.030 0.30 +/-0.010 16 32 92 5 HF64303160 h
20 0/-0.030 0.30 +/-0.010 20 38 104 5 HF64303200 h
HF643
weldon shank, 5 flutes ideal for trochoidal milling, corner radius
OSAWA
NORM
PMKNSH
+++ +
+ 1st choice , suitable
SIDE MILLING
HELICAL RAMPING VERTICAL
TROCHOIDAL
CR
CR
HF UNI - Variable helix - Corner radius
450
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
CUTTING PARAMETERS
HF643
SIDE MILLING
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
ap x ae 1.5D x 0.5D 1.5D x 0.5D 1.2D x 0.3D 1.2D x 0.3D
Vc (m/min) 160-180 100-120 70-90 40-60
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
413540 0.019 1280 8760 0.017 740 6370 0.015 480 3980 0.021 410
510830 0.023 1270 7010 0.021 740 5100 0.019 480 3180 0.026 410
69020 0.028 1240 5840 0.025 720 4250 0.022 470 2650 0.030 400
86770 0.036 1210 4380 0.032 700 3180 0.029 450 1990 0.039 390
10 5410 0.043 1160 3500 0.039 670 2550 0.034 440 1590 0.047 370
12 4510 0.049 1100 2920 0.044 640 2120 0.039 420 1330 0.054 360
16 3380 0.061 1030 2190 0.055 600 1590 0.049 390 1000 0.067 340
20 2710 0.074 1010 1750 0.067 590 1270 0.060 380 800 0.082 330
ap x ae ≤ D5 1.5D x 0.3D 1.5D x 0.3D 1.2D x 0.2D 1.2D x 0.2D
HELICAL
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
_° x ae 5° x 0.4D 3° x 0.4D 3° x 0.4D 3° x 0.4D
Vc (m/min) 130-150 80-100 60-80 30-50
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
411150 0.011 640 7170 0.011 385 5570 0.009 263 3180 0.009 140
58920 0.014 635 5730 0.013 380 4460 0.012 262 2550 0.011 140
67430 0.017 620 4780 0.016 370 3720 0.014 256 2120 0.013 136
85570 0.022 605 3580 0.020 360 2790 0.018 249 1590 0.017 133
10 4460 0.026 580 2870 0.024 350 2230 0.021 239 1270 0.020 127
12 3720 0.030 555 2390 0.028 330 1860 0.024 228 1060 0.023 121
16 2790 0.037 520 1790 0.035 310 1390 0.031 213 800 0.029 114
20 2230 0.045 505 1430 0.042 300 1110 0.037 207 640 0.035 111
_° max ≤ D5 2° 2° 1° 1°
RAMPING
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
_° x ae 15° x D 10° x D 5° x D 5° x D
Vc (m/min) 130-150 80-100 60-80 30-50
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
411150 0.013 700 7170 0.012 415 5570 0.011 306 3180 0.015 240
58920 0.016 695 5730 0.014 410 4460 0.014 305 2550 0.019 240
67430 0.018 680 4780 0.017 405 3720 0.016 298 2120 0.022 234
85570 0.024 660 3580 0.022 390 2790 0.021 290 1590 0.029 227
10 4460 0.028 635 2870 0.026 375 2230 0.025 278 1270 0.034 218
12 3720 0.033 605 2390 0.030 360 1860 0.029 265 1060 0.039 208
16 2790 0.041 570 1790 0.037 335 1390 0.036 248 800 0.049 196
20 2230 0.050 550 1430 0.046 325 1110 0.043 241 640 0.060 191
PARAMETERS SUGGESTED WITH HIGH PRECISION WELDON CHUCK AND STABLE MACHINING CONDITION.
FOR APPLICATION ON HIGH POWER MILLING CHUCK, PLEASE REFER TO HF642 PARAMETERS.
HF UNI - Variable helix - Corner radius
451
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
CUTTING PARAMETERS
HF643
VERTICAL
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
ap x ae D x 0.4D D x 0.4D D x 0.25D D x 0.25D
Vc (m/min) 130-150 80-100 60-80 30-50
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
411150 0.016 880 7170 0.014 510 5570 0.012 330 3180 0.011 180
58920 0.020 870 5730 0.018 500 4460 0.015 330 2550 0.014 170
67430 0.023 850 4780 0.021 490 3720 0.017 320 2120 0.016 170
85570 0.030 830 3580 0.027 480 2790 0.022 310 1590 0.021 170
10 4460 0.036 800 2870 0.032 460 2230 0.027 300 1270 0.025 160
12 3720 0.041 760 2390 0.037 440 1860 0.031 280 1060 0.029 150
16 2790 0.051 710 1790 0.046 410 1390 0.038 270 800 0.036 140
20 2230 0.062 690 1430 0.056 400 1110 0.047 260 640 0.043 140
TROCHOIDAL
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
ap x ae 2D x 0.2D 2D x 0.1D 1.5D x 0.1D 1.5D x 0.1D
Vc (m/min) 190-230 130-150 100-120 50-70
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
48760 0.039 1720 5570 0.035 990 4380 0.031 690 2390 0.043 520
57010 0.049 1710 4460 0.044 980 3500 0.039 680 1910 0.054 510
65840 0.057 1680 3720 0.052 960 2920 0.046 670 1590 0.063 500
84380 0.074 1630 2790 0.067 930 2190 0.060 650 1190 0.082 490
10 3500 0.089 1560 2230 0.080 900 1750 0.071 620 960 0.098 470
12 2920 0.102 1490 1860 0.092 850 1460 0.082 600 800 0.112 450
16 2190 0.128 1400 1390 0.115 800 1090 0.102 560 600 0.140 420
20 1750 0.155 1360 1110 0.140 770 880 0.124 550 480 0.171 410
ap x ae ≤ D5 1.5D x 0.1D 1.5D x 0.1D D x 0.1D D x 0.1D
NOTES:
Down milling CNC programming is required.
“ae” value max 0.2xD - “T” value max 0.1xD.
The use of end mill with diameter 30-40% smaller than the width of the slot is recommended.
The cutting conditions are based on CNC programming with medium dynamic speed.
With lower CNC dynamic speed, use the same cutting conditions or reduce the cutting speed Vc.
With higher CNC dynamic speed, reduce the “T” value by approximately -30 -50% and apply the maximum available cutting speed Vc.
X (+)
Y (+) Y
R1 Cutter radius
R2 Half of slot width
T Programming width of cut
ae Actual width of cut
ae
T
R2
R1
PARAMETERS SUGGESTED WITH HIGH PRECISION WELDON CHUCK AND STABLE MACHINING CONDITION.
FOR APPLICATION ON HIGH POWER MILLING CHUCK, PLEASE REFER TO HF642 PARAMETERS.
HF UNI - Variable helix - Corner radius
452
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
h stock standard f non-standard stock m stock exhaustion
D D Tol. CR CR Tol. d(h6) l l1 L z EDP No. Stock
60/-0.025 0.10 +/-0.010 6 25 75 5 HF7420106075 h
80/-0.030 0.20 +/-0.010 8 25 75 5 HF7420208075 h
10 0/-0.030 0.20 +/-0.010 10 38 100 5 HF74202100100 h
12 0/-0.030 0.30 +/-0.010 12 45 100 5 HF74203120100 h
16 0/-0.030 0.30 +/-0.010 16 55 125 5 HF74203160125 h
20 0/-0.030 0.30 +/-0.010 20 65 125 5 HF74203200125 h
HF742
cylindrical shank, long 5 flutes ideal for trochoidal milling, corner radius
OSAWA
NORM
PMKNSH
+++ +
+ 1st choice , suitable
SIDE MILLING
HELICAL RAMPING VERTICAL
TROCHOIDAL
CR
CR
HF UNI - Variable helix - Corner radius
453
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
CUTTING PARAMETERS
HF742
SIDE MILLING
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
ap x ae 1.5D x 03D 1.5D x 0.3D 1.2D x 0.2D 1.2D x 0.2D
Vc (m/min) 110-130 70-90 50-70 30-50
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
66370 0.023 740 4250 0.021 450 3180 0.019 300 2120 0.026 270
84780 0.028 660 3180 0.025 400 2390 0.022 260 1590 0.030 240
10 3820 0.033 630 2550 0.030 380 1910 0.026 250 1270 0.036 230
12 3180 0.037 590 2120 0.033 350 1590 0.030 240 1060 0.041 220
16 2390 0.042 510 1590 0.038 300 1190 0.034 200 800 0.047 190
20 1910 0.057 540 1270 0.051 330 960 0.046 220 640 0.063 200
HELICAL
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
_° x ae 4° x 0.4D 3° x 0.4D 3° x 0.4D 2° x 0.4D
Vc (m/min) 90-110 60-80 40-60 20-40
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
65310 0.016 435 3720 0.016 290 2650 0.013 172 1590 0.014 109
83980 0.019 385 2790 0.018 255 1990 0.015 153 1190 0.016 96
10 3180 0.023 365 2230 0.022 245 1590 0.018 145 960 0.019 92
12 2650 0.026 345 1860 0.025 230 1330 0.021 137 800 0.022 87
16 1990 0.030 295 1390 0.028 195 1000 0.024 118 600 0.025 74
20 1590 0.040 315 1110 0.038 210 800 0.032 127 480 0.033 80
RAMPING
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
_° x ae 5° x D 4° x D 3° x D 3° x D
Vc (m/min) 80-100 50-70 35-55 20-30
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
64780 0.017 405 3180 0.016 250 2390 0.015 179 1330 0.021 137
83580 0.020 360 2390 0.019 225 1790 0.018 158 1000 0.024 122
10 2870 0.024 345 1910 0.022 215 1430 0.021 150 800 0.029 116
12 2390 0.027 325 1590 0.025 200 1190 0.024 142 660 0.033 108
16 1790 0.031 275 1190 0.029 170 900 0.027 122 500 0.037 93
20 1430 0.042 295 960 0.039 185 720 0.037 131 400 0.050 100
PARAMETERS SUGGESTED WITH HIGH POWER MILLING CHUCK AND STABLE MACHINING CONDITION
HF UNI - Variable helix - Corner radius
454
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
CUTTING PARAMETERS
HF742
VERTICAL
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
ap x ae D x 0.4D D x 0.4D D x 0.25D D x 0.25D
Vc (m/min) 80-100 50-70 35-55 20-30
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
64780 0.022 520 3180 0.019 310 2390 0.016 190 1330 0.015 100
83580 0.026 460 2390 0.023 280 1790 0.019 170 1000 0.018 90
10 2870 0.030 440 1910 0.027 260 1430 0.023 160 800 0.021 90
12 2390 0.034 410 1590 0.031 250 1190 0.026 150 660 0.024 80
16 1790 0.039 350 1190 0.035 210 900 0.029 130 500 0.027 70
20 1430 0.053 380 960 0.048 230 720 0.040 140 400 0.037 70
TROCHOIDAL
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
ap x ae 3D x 0.1D 3D x 0.1D 2D x 0.1D 2D x 0.1D
Vc (m/min) 130-170 100-130 70-90 40-60
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
64250 0.054 1150 2920 0.049 710 2120 0.043 460 1330 0.059 400
83180 0.064 1020 2190 0.058 630 1590 0.051 410 1000 0.070 350
10 2550 0.076 970 1750 0.068 600 1270 0.061 390 800 0.084 330
12 2120 0.086 910 1460 0.077 570 1060 0.069 360 660 0.095 310
16 1590 0.098 780 1090 0.088 480 800 0.078 310 500 0.108 270
20 1270 0.132 840 880 0.119 520 640 0.106 340 400 0.145 290
NOTES:
Down milling CNC programming is required.
“ae” value max 0.2xD - “T” value max 0.1xD.
The use of end mill with diameter 30-40% smaller than the width of the slot is recommended.
The cutting conditions are based on CNC programming with medium dynamic speed.
With lower CNC dynamic speed, use the same cutting conditions or reduce the cutting speed Vc.
With higher CNC dynamic speed, reduce the “T” value by approximately -30 -50% and apply the maximum available cutting speed Vc.
X (+)
Y (+) Y
R1 Cutter radius
R2 Half of slot width
T Programming width of cut
ae Actual width of cut
ae
T
R2
R1
PARAMETERS SUGGESTED WITH HIGH POWER MILLING CHUCK AND STABLE MACHINING CONDITION
HF UNI - Variable helix - Corner radius
455
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
h stock standard f non-standard stock m stock exhaustion
D D Tol. CR CR Tol. d(h6) l l1 L z EDP No. Stock
60/-0.025 0.10 +/-0.010 6 25 75 5 HF7430106075 h
80/-0.030 0.20 +/-0.010 8 25 75 5 HF7430208075 h
10 0/-0.030 0.20 +/-0.010 10 38 100 5 HF74302100100 h
12 0/-0.030 0.30 +/-0.010 12 45 100 5 HF74303120100 h
16 0/-0.030 0.30 +/-0.010 16 55 125 5 HF74303160125 h
20 0/-0.030 0.30 +/-0.010 20 65 125 5 HF74303200125 h
HF743
weldon shank, long 5 flutes ideal for trochoidal milling, corner radius
OSAWA
NORM
PMKNSH
+++ +
+ 1st choice , suitable
SIDE MILLING
HELICAL RAMPING VERTICAL
TROCHOIDAL
CR
CR
HF UNI - Variable helix - Corner radius
456
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
CUTTING PARAMETERS
HF743
SIDE MILLING
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
ap x ae 1.5D x 03D 1.5D x 0.3D 1.2D x 0.2D 1.2D x 0.2D
Vc (m/min) 110-130 70-90 50-70 30-50
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
66370 0.023 740 4250 0.021 450 3180 0.019 300 2120 0.026 270
84780 0.028 660 3180 0.025 400 2390 0.022 260 1590 0.030 240
10 3820 0.033 630 2550 0.030 380 1910 0.026 250 1270 0.036 230
12 3180 0.037 590 2120 0.033 350 1590 0.030 240 1060 0.041 220
16 2390 0.042 510 1590 0.038 300 1190 0.034 200 800 0.047 190
20 1910 0.057 540 1270 0.051 330 960 0.046 220 640 0.063 200
HELICAL
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
_° x ae 4° x 0.4D 3° x 0.4D 3° x 0.4D 2° x 0.4D
Vc (m/min) 90-110 60-80 40-60 20-40
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
65310 0.016 435 3720 0.016 290 2650 0.013 172 1590 0.014 109
83980 0.019 385 2790 0.018 255 1990 0.015 153 1190 0.016 96
10 3180 0.023 365 2230 0.022 245 1590 0.018 145 960 0.019 92
12 2650 0.026 345 1860 0.025 230 1330 0.021 137 800 0.022 87
16 1990 0.030 295 1390 0.028 195 1000 0.024 118 600 0.025 74
20 1590 0.040 315 1110 0.038 210 800 0.032 127 480 0.033 80
RAMPING
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
_° x ae 5° x D 4° x D 3° x D 3° x D
Vc (m/min) 80-100 50-70 35-55 20-30
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
64780 0.017 405 3180 0.016 250 2390 0.015 179 1330 0.021 137
83580 0.020 360 2390 0.019 225 1790 0.018 158 1000 0.024 122
10 2870 0.024 345 1910 0.022 215 1430 0.021 150 800 0.029 116
12 2390 0.027 325 1590 0.025 200 1190 0.024 142 660 0.033 108
16 1790 0.031 275 1190 0.029 170 900 0.027 122 500 0.037 93
20 1430 0.042 295 960 0.039 185 720 0.037 131 400 0.050 100
PARAMETERS SUGGESTED WITH HIGH PRECISION WELDON CHUCK AND STABLE MACHINING CONDITION.
FOR APPLICATION ON HIGH POWER MILLING CHUCK, PLEASE REFER TO HF742 PARAMETERS.
HF UNI - Variable helix - Corner radius
457
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
CUTTING PARAMETERS
HF743
VERTICAL
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
ap x ae D x 0.4D D x 0.4D D x 0.25D D x 0.25D
Vc (m/min) 80-100 50-70 35-55 20-30
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
64780 0.022 520 3180 0.019 310 2390 0.016 190 1330 0.015 100
83580 0.026 460 2390 0.023 280 1790 0.019 170 1000 0.018 90
10 2870 0.030 440 1910 0.027 260 1430 0.023 160 800 0.021 90
12 2390 0.034 410 1590 0.031 250 1190 0.026 150 660 0.024 80
16 1790 0.039 350 1190 0.035 210 900 0.029 130 500 0.027 70
20 1430 0.053 380 960 0.048 230 720 0.040 140 400 0.037 70
TROCHOIDAL
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
ap x ae 3D x 0.1D 3D x 0.1D 2D x 0.1D 2D x 0.1D
Vc (m/min) 130-170 100-130 70-90 40-60
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
64250 0.054 1150 2920 0.049 710 2120 0.043 460 1330 0.059 400
83180 0.064 1020 2190 0.058 630 1590 0.051 410 1000 0.070 350
10 2550 0.076 970 1750 0.068 600 1270 0.061 390 800 0.084 330
12 2120 0.086 910 1460 0.077 570 1060 0.069 360 660 0.095 310
16 1590 0.098 780 1090 0.088 480 800 0.078 310 500 0.108 270
20 1270 0.132 840 880 0.119 520 640 0.106 340 400 0.145 290
NOTES:
Down milling CNC programming is required.
“ae” value max 0.2xD - “T” value max 0.1xD.
The use of end mill with diameter 30-40% smaller than the width of the slot is recommended.
The cutting conditions are based on CNC programming with medium dynamic speed.
With lower CNC dynamic speed, use the same cutting conditions or reduce the cutting speed Vc.
With higher CNC dynamic speed, reduce the “T” value by approximately -30 -50% and apply the maximum available cutting speed Vc.
X (+)
Y (+) Y
R1 Cutter radius
R2 Half of slot width
T Programming width of cut
ae Actual width of cut
ae
T
R2
R1
PARAMETERS SUGGESTED WITH HIGH PRECISION WELDON CHUCK AND STABLE MACHINING CONDITION.
FOR APPLICATION ON HIGH POWER MILLING CHUCK, PLEASE REFER TO HF742 PARAMETERS.
HF UNI SC - Variable Helix and unequal pitch - C+R
458
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
h stock standard f non-standard stock m stock exhaustion
D D Tol. C+R C+R Tol d(h6) l l1 L z EDP No. Stock
10/-0.020 +/-0.020 4 3 50 4 HF861010 h
1.5 0/-0.020 +/-0.020 4 4.5 50 4 HF861015 h
20/-0.020 +/-0.020 4 6.5 50 4 HF861020 h
2.5 0/-0.020 +/-0.020 4 6.5 50 4 HF861025 h
30/-0.025 0.1 +/-0.020 6 9 50 4 HF861030 h
3.5 0/-0.025 0.1 +/-0.020 6 12 50 4 HF861035 h
40/-0.025 0.1 +/-0.020 6 12 50 4 HF861040 h
4.5 0/-0.025 0.1 +/-0.020 6 15 50 4 HF861045 h
50/-0.025 0.1 +/-0.020 6 15 50 4 HF861050 h
60/-0.025 0.1 +/-0.020 6 20 60 4 HF861060 h
70/-0.030 0.2 +/-0.020 8 22 64 4 HF861070 h
80/-0.030 0.2 +/-0.020 8 22 64 4 HF861080 h
90/-0.030 0.2 +/-0.020 10 27 70 4 HF861090 h
10 0/-0.030 0.2 +/-0.020 10 27 70 4 HF861100 h
11 0/-0.030 0.2 +/-0.020 12 32 75 4 HF861110 h
12 0/-0.030 0.2 +/-0.020 12 32 75 4 HF861120 h
13 0/-0.030 0.2 +/-0.020 14 32 90 4 HF861130 h
14 0/-0.030 0.2 +/-0.020 14 32 90 4 HF861140 h
15 0/-0.030 0.2 +/-0.020 16 32 90 4 HF861150 h
16 0/-0.030 0.2 +/-0.020 16 32 90 4 HF861160 h
18 0/-0.030 0.2 +/-0.020 18 38 100 4 HF861180 h
20 0/-0.030 0.2 +/-0.020 20 38 100 4 HF861200 h
HF861
weldon shank, SC smooth cut for low cutting
force, chamfer + radius
OSAWA
NORM
PMKNSH
+++ +
+ 1st choice , suitable
SLOTTING
2D
SIDE MILLING
HELICAL RAMPING VERTICAL DRILLING
TROCHOIDAL
C+R
from D1 to D2.5: cylindrical shank
from D3: weldon shank
C+R
HF UNI SC - Variable Helix and unequal pitch - C+R
459
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
CUTTING PARAMETERS
HF861
SLOTTING
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
ap x ae D X D D x D 0.5D x D 0.5D x D
Vc (m/min) 130-150 80-100 60-80 30-50
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
130000 0.005 600 28660 0.005 520 22290 0.004 330 12740 0.004 180
1.5 29720 0.008 890 19110 0.007 520 14860 0.006 330 8490 0.005 180
222290 0.010 890 14330 0.009 520 11150 0.008 330 6370 0.007 180
314860 0.014 830 9550 0.013 480 7430 0.011 310 4250 0.010 170
411150 0.019 830 7170 0.017 480 5570 0.014 310 3180 0.013 160
58920 0.023 820 5730 0.021 470 4460 0.017 310 2550 0.016 160
67430 0.027 800 4780 0.024 460 3720 0.020 300 2120 0.019 160
85570 0.035 780 3580 0.032 450 2790 0.026 290 1590 0.025 160
10 4460 0.042 750 2870 0.038 430 2230 0.032 280 1270 0.029 150
12 3720 0.048 710 2390 0.043 410 1860 0.036 270 1060 0.034 140
14 3180 0.054 690 2050 0.049 400 1590 0.041 260 910 0.038 140
16 2790 0.060 670 1790 0.054 390 1390 0.045 250 800 0.042 130
18 2480 0.066 650 1590 0.059 380 1240 0.050 250 710 0.046 130
20 2230 0.073 650 1430 0.066 380 1110 0.055 240 640 0.051 130
ap x ae D1 0.25D x D
ap x ae ≤ D3 0.5D x D
SLOTTING
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm²
ap x ae 1.5D x D 1.5D x D
Vc (m/min) 100-120 60-80
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
84380 0.028 490 2790 0.025 280
10 3500 0.034 470 2230 0.030 270
12 2920 0.038 450 1860 0.035 260
14 2500 0.043 430 1590 0.039 250
16 2190 0.048 420 1390 0.043 240
18 1950 0.053 410 1240 0.048 240
20 1750 0.058 410 1110 0.053 230
SLOTTING
Material Group
ISO 513 P1 P2 M1 K1
Hardness/Rm ≤ 700 N/mm²
ap x ae 2D x D
Vc (m/min) 75-95
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
10 2710 0.025 270
12 2260 0.029 260
14 1930 0.032 250
16 1690 0.036 240
18 1500 0.040 240
20 1350 0.044 240
PARAMETERS SUGGESTED WITH HIGH PRECISION WELDON CHUCK AND STABLE MACHINING CONDITION.
FOR APPLICATION ON HIGH POWER MILLING CHUCK, PLEASE REFER TO HF840 PARAMETERS.
HF UNI SC - Variable Helix and unequal pitch - C+R
460
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
CUTTING PARAMETERS
HF861
SIDE MILLING
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
ap x ae 1.5D x 0.5D 1.5D x 0.5D 1.2D x 0.3D 1.2D x 0.3D
Vc (m/min) 160-180 100-120 70-90 40-60
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
130000 0.006 720 30000 0.005 650 25480 0.005 490 15920 0.007 420
1.5 36090 0.009 1300 23350 0.008 760 16990 0.007 490 10620 0.010 420
227070 0.012 1300 17520 0.011 760 12740 0.010 490 7960 0.013 420
318050 0.017 1210 11680 0.015 710 8490 0.013 460 5310 0.018 390
413540 0.022 1200 8760 0.020 700 6370 0.018 450 3980 0.024 390
510830 0.028 1200 7010 0.025 700 5100 0.022 450 3180 0.030 390
69020 0.032 1170 5840 0.029 680 4250 0.026 440 2650 0.036 380
86770 0.042 1140 4380 0.038 660 3180 0.034 430 1990 0.046 370
10 5410 0.050 1090 3500 0.045 640 2550 0.040 410 1590 0.055 350
12 4510 0.058 1040 2920 0.052 610 2120 0.046 390 1330 0.063 340
14 3870 0.065 1000 2500 0.058 580 1820 0.052 380 1140 0.071 330
16 3380 0.072 970 2190 0.065 570 1590 0.058 370 1000 0.079 320
18 3010 0.079 950 1950 0.071 560 1420 0.063 360 880 0.087 310
20 2710 0.088 950 1750 0.079 550 1270 0.070 360 800 0.096 310
ap x ae ≤ D3 1.5D x 0.1D
HELICAL
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
_° x ae 5° x 0.4D 4° x 0.4D 3° x 0.4D 3° x 0.4D
Vc (m/min) 130-150 80-100 60-80 30-50
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
130000 0.004 435 28660 0.003 390 22290 0.003 268 12740 0.003 143
1.5 29720 0.005 650 19110 0.005 390 14860 0.005 268 8490 0.004 143
222290 0.007 650 14330 0.007 390 11150 0.006 268 6370 0.006 143
314860 0.010 605 9550 0.010 365 7430 0.008 250 4250 0.008 133
411150 0.013 600 7170 0.013 360 5570 0.011 247 3180 0.010 132
58920 0.017 600 5730 0.016 360 4460 0.014 246 2550 0.013 131
67430 0.020 585 4780 0.018 350 3720 0.016 241 2120 0.015 128
85570 0.025 570 3580 0.024 340 2790 0.021 235 1590 0.020 125
10 4460 0.031 545 2870 0.029 325 2230 0.025 225 1270 0.024 120
12 3720 0.035 520 2390 0.033 310 1860 0.029 214 1060 0.027 114
14 3180 0.039 500 2050 0.037 300 1590 0.032 206 910 0.030 110
16 2790 0.044 490 1790 0.041 290 1390 0.036 200 800 0.034 108
18 2480 0.048 475 1590 0.045 285 1240 0.040 197 710 0.037 105
20 2230 0.053 475 1430 0.050 285 1110 0.044 195 640 0.041 105
_° max ≤ D3 1°
PARAMETERS SUGGESTED WITH HIGH PRECISION WELDON CHUCK AND STABLE MACHINING CONDITION.
FOR APPLICATION ON HIGH POWER MILLING CHUCK, PLEASE REFER TO HF840 PARAMETERS.
HF UNI SC - Variable Helix and unequal pitch - C+R
461
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
CUTTING PARAMETERS
HF861
RAMPING
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
_° x ae 15° x D 10° x D 5° x D 5° x D
Vc (m/min) 130-150 80-100 60-80 30-50
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
67430 0.022 640 4780 0.020 380 3720 0.019 281 2120 0.026 220
85570 0.028 620 3580 0.026 370 2790 0.024 273 1590 0.034 214
10 4460 0.034 600 2870 0.031 355 2230 0.029 262 1270 0.040 205
12 3720 0.038 570 2390 0.035 335 1860 0.034 250 1060 0.046 196
14 3180 0.043 550 2050 0.040 325 1590 0.038 240 910 0.052 189
16 2790 0.048 535 1790 0.044 315 1390 0.042 233 800 0.058 185
18 2480 0.053 520 1590 0.048 310 1240 0.046 229 710 0.063 180
20 2230 0.058 520 1430 0.054 305 1110 0.051 227 640 0.070 180
VERTICAL
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
ap x ae D x 0.4D D x 0.4D D x 0.25D D x 0.25D
Vc (m/min) 130-150 80-100 60-80 30-50
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
67430 0.027 800 4780 0.024 460 3720 0.020 300 2120 0.019 160
85570 0.035 780 3580 0.032 450 2790 0.026 290 1590 0.025 160
10 4460 0.042 750 2870 0.038 430 2230 0.032 280 1270 0.029 150
12 3720 0.048 710 2390 0.043 410 1860 0.036 270 1060 0.034 140
14 3180 0.054 690 2050 0.049 400 1590 0.041 260 910 0.038 140
16 2790 0.060 670 1790 0.054 390 1390 0.045 250 800 0.042 130
18 2480 0.066 650 1590 0.059 380 1240 0.050 250 710 0.046 130
20 2230 0.073 650 1430 0.066 380 1110 0.055 240 640 0.051 130
DRILLING
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
ap x ae D x D D x D 0.5D x D 0.5D x D
Vc (m/min) 100-120 60-80 45-55 20-40
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
130000 0.003 300 22290 0.002 200 17520 0.002 140 9550 0.003 110
1.5 23350 0.004 350 14860 0.003 200 11680 0.003 140 6370 0.004 110
217520 0.005 350 11150 0.005 200 8760 0.004 140 4780 0.006 110
311680 0.007 330 7430 0.006 190 5840 0.006 130 3180 0.008 100
48760 0.009 320 5570 0.008 190 4380 0.007 130 2390 0.010 100
57010 0.012 320 4460 0.010 180 3500 0.009 130 1910 0.013 100
65840 0.014 320 3720 0.012 180 2920 0.011 130 1590 0.015 90
84380 0.018 310 2790 0.016 180 2190 0.014 120 1190 0.019 90
10 3500 0.021 290 2230 0.019 170 1750 0.017 120 960 0.023 90
12 2920 0.024 280 1860 0.022 160 1460 0.019 110 800 0.026 80
14 2500 0.027 270 1590 0.024 150 1250 0.022 110 680 0.030 80
16 2190 0.030 260 1390 0.027 150 1090 0.024 100 600 0.033 80
18 1950 0.033 260 1240 0.030 150 970 0.026 100 530 0.036 80
20 1750 0.037 260 1110 0.033 150 880 0.029 100 480 0.040 80
ap x ae ≤ D3 0.5D x D
PARAMETERS SUGGESTED WITH HIGH PRECISION WELDON CHUCK AND STABLE MACHINING CONDITION.
FOR APPLICATION ON HIGH POWER MILLING CHUCK, PLEASE REFER TO HF840 PARAMETERS.
HF UNI SC - Variable Helix and unequal pitch - C+R
462
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
CUTTING PARAMETERS
HF861
TROCHOIDAL
Material Group
ISO 513 P1 P2 M1 K1 P3 P4 M2 K2 K3 P5 M3 M4 K4 S1 S4 S2 S3 S5
Hardness/Rm ≤ 700 N/mm² 700-1000 N/mm² ≤ 35 HRC ≤ 40 HRC
ap x ae 2D x 0.2D 2D x 0.1D 1.5D x 0.1D 1.5D x 0.1D
Vc (m/min) 190-230 130-150 100-120 50-70
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
130000 0.013 1500 22290 0.011 1000 17520 0.010 700 9550 0.014 530
1.5 23350 0.019 1750 14860 0.017 1000 11680 0.015 700 6370 0.021 530
217520 0.025 1750 11150 0.023 1000 8760 0.020 700 4780 0.028 530
311680 0.035 1640 7430 0.032 940 5840 0.028 650 3180 0.039 490
48760 0.046 1620 5570 0.042 930 4380 0.037 650 2390 0.051 490
57010 0.058 1610 4460 0.052 920 3500 0.046 640 1910 0.063 480
65840 0.068 1580 3720 0.061 900 2920 0.054 630 1590 0.074 470
84380 0.088 1530 2790 0.079 880 2190 0.070 610 1190 0.096 460
10 3500 0.105 1470 2230 0.095 840 1750 0.084 590 960 0.116 440
12 2920 0.120 1400 1860 0.108 800 1460 0.096 560 800 0.132 420
14 2500 0.135 1350 1590 0.122 770 1250 0.108 540 680 0.149 400
16 2190 0.150 1310 1390 0.135 750 1090 0.120 520 600 0.165 400
18 1950 0.165 1290 1240 0.149 740 970 0.132 510 530 0.182 380
20 1750 0.183 1280 1110 0.164 730 880 0.146 510 480 0.201 390
ap x ae D1 D x 0.1D D x 0.1D D x 0.1D D x 0.1D
ap x ae ≤ D3 1.5D x 0.1D 1.5D x 0.1D D x 0.1D D x 0.1D
NOTES:
Down milling CNC programming is required.
“ae” value max 0.2xD - “T” value max 0.1xD.
The use of end mill with diameter 30-40% smaller than the width of the slot is recommended.
The cutting conditions are based on CNC programming with medium dynamic speed.
With lower CNC dynamic speed, use the same cutting conditions or reduce the cutting speed Vc.
With higher CNC dynamic speed, reduce the “T” value by approximately -30 -50% and apply the maximum available cutting speed Vc.
X (+)
Y (+) Y
R1 Cutter radius
R2 Half of slot width
T Programming width of cut
ae Actual width of cut
ae
T
R2
R1
PARAMETERS SUGGESTED WITH HIGH PRECISION WELDON CHUCK AND STABLE MACHINING CONDITION.
FOR APPLICATION ON HIGH POWER MILLING CHUCK, PLEASE REFER TO HF840 PARAMETERS.
HF HARD - Unequal pitch - 45° chamfer
463
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
h stock standard f non-standard stock m stock exhaustion
D D Tol. C45° C45° Tol. d(h6) l l1 L z EDP No. Stock
30/-0.030 0.10 +/-0.020 6 9 57 4 HF850030 h
40/-0.030 0.10 +/-0.020 6 11 57 4 HF850040 h
50/-0.030 0.10 +/-0.020 6 13 57 4 HF850050 h
60/-0.030 0.10 +/-0.020 6 13 57 4 HF850060 h
80/-0.030 0.20 +/-0.020 8 20 64 4 HF850080 h
10 0/-0.030 0.20 +/-0.020 10 22 72 4 HF850100 h
12 0/-0.030 0.20 +/-0.020 12 26 83 4 HF850120 h
14 0/-0.030 0.30 +/-0.020 14 32 90 4 HF850140 h
16 0/-0.030 0.30 +/-0.020 16 32 92 4 HF850160 h
20 0/-0.030 0.40 +/-0.020 20 38 104 4 HF850200 h
HF850
cylindrical shank, 45° chamfer
OSAWA
NORM
PMKNSH
+++ ++
+ 1st choice , suitable
SLOTTING
SIDE MILLING
HELICAL RAMPING VERTICAL
TROCHOIDAL
C45°
C45°
HF HARD - Unequal pitch - 45° chamfer
464
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
CUTTING PARAMETERS
HF850
SLOTTING
Material Group
ISO 513 P4 M4 K4 P4 P5 M4 M5 K4 S1
P5 P6 M5
K4 S2 S3
H1 H4 H5
Hardness/Rm 800-1000 N/mm² 900-1200 N/mm² 35-45 HRC ≤ 55 HRC
ap x ae 0.5D x D 0.5D x D 0.3D x D 0.3D x D
Vc (m/min) 80-100 60-80 40-60 30-50
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
39550 0.012 450 7430 0.011 320 5310 0.009 190 4250 0.008 140
47170 0.016 450 5570 0.014 320 3980 0.012 190 3180 0.011 140
55730 0.020 450 4460 0.018 310 3180 0.015 190 2550 0.014 140
64780 0.023 440 3720 0.021 310 2650 0.017 180 2120 0.016 140
83580 0.030 430 2790 0.027 300 1990 0.022 180 1590 0.021 130
10 2870 0.036 410 2230 0.032 290 1590 0.027 170 1270 0.025 130
12 2390 0.041 390 1860 0.037 270 1330 0.031 160 1060 0.029 120
14 2050 0.046 380 1590 0.041 260 1140 0.034 160 910 0.032 120
16 1790 0.051 370 1390 0.046 260 1000 0.038 150 800 0.036 110
20 1430 0.062 350 1110 0.056 250 800 0.047 150 640 0.043 110
ap x ae ≤ D5 0.3D x D 0.3D x D 0.2D x D 0.1D x D
SIDE MILLING
Material Group
ISO 513 P4 M4 K4 P4 P5 M4 M5 K4 S1
P5 P6 M5
K4 S2 S3
H1 H4 H5
Hardness/Rm 800-1000 N/mm² 900-1200 N/mm² 35-45 HRC ≤ 55 HRC
ap x ae 1.5D x 0.3D 1.5D x 0.2D 1.2D x 0.2D 1.2D x 0.1D
Vc (m/min) 100-120 70-90 50-70 40-60
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
311680 0.014 670 8490 0.013 440 6370 0.011 290 5310 0.016 330
48760 0.019 660 6370 0.017 430 4780 0.015 290 3980 0.021 330
57010 0.023 660 5100 0.021 430 3820 0.019 290 3180 0.026 330
65840 0.028 640 4250 0.025 420 3180 0.022 280 2650 0.030 320
84380 0.036 630 3180 0.032 410 2390 0.029 270 1990 0.039 310
10 3500 0.043 600 2550 0.039 390 1910 0.034 260 1590 0.047 300
12 2920 0.049 570 2120 0.044 370 1590 0.039 250 1330 0.054 290
14 2500 0.055 550 1820 0.050 360 1360 0.044 240 1140 0.061 280
16 2190 0.061 540 1590 0.055 350 1190 0.049 230 1000 0.067 270
20 1750 0.074 520 1270 0.067 340 960 0.060 230 800 0.082 260
ap x ae ≤ D5 1.2D x 0.2D 1.2D x 0.1D D x 0.2D D x 0.1D
HELICAL
Material Group
ISO 513 P4 M4 K4 P4 P5 M4 M5 K4 S1
P5 P6 M5
K4 S2 S3
H1 H4 H5
Hardness/Rm 800-1000 N/mm² 900-1200 N/mm² 35-45 HRC ≤ 55 HRC
_° x ae 5° x 0.4D 4° x 0.4D 3° x 0.4D 2° x 0.4D
Vc (m/min) 80-100 60-80 40-60 30-50
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
39550 0.009 330 7430 0.008 240 5310 0.007 152 4250 0.008 128
47170 0.011 330 5570 0.011 240 3980 0.009 150 3180 0.010 126
55730 0.014 325 4460 0.013 235 3180 0.012 149 2550 0.012 126
64780 0.017 320 3720 0.016 230 2650 0.014 146 2120 0.015 123
83580 0.022 310 2790 0.020 225 1990 0.018 142 1590 0.019 120
10 2870 0.026 300 2230 0.024 215 1590 0.021 136 1270 0.023 115
12 2390 0.030 285 1860 0.028 205 1330 0.024 130 1060 0.026 109
14 2050 0.033 275 1590 0.031 200 1140 0.028 126 910 0.029 106
16 1790 0.037 265 1390 0.035 190 1000 0.031 122 800 0.032 103
20 1430 0.045 260 1110 0.042 185 800 0.037 119 640 0.039 100
_° ≤ D5 2° 2° 1° 1°
PARAMETERS SUGGESTED WITH HIGH POWER MILLING CHUCK AND STABLE MACHINING CONDITION
HF HARD - Unequal pitch - 45° chamfer
465
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
CUTTING PARAMETERS
HF850
RAMPING
Material Group
ISO 513 P4 M4 K4 P4 P5 M4 M5 K4 S1
P5 P6 M5
K4 S2 S3
H1 H4 H5
Hardness/Rm 800-1000 N/mm² 900-1200 N/mm² 35-45 HRC ≤ 55 HRC
_° x ae 5° x D 4° x D 3° x D 2° x D
Vc (m/min) 80-100 60-80 40-60 30-50
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
64780 0.020 385 3720 0.019 280 2650 0.018 187 2120 0.027 232
83580 0.026 370 2790 0.024 270 1990 0.023 182 1590 0.035 226
10 2870 0.031 360 2230 0.029 260 1590 0.027 175 1270 0.043 216
12 2390 0.036 340 1860 0.033 245 1330 0.031 167 1060 0.049 206
14 2050 0.040 330 1590 0.037 240 1140 0.035 161 910 0.055 199
16 1790 0.045 320 1390 0.042 230 1000 0.039 157 800 0.061 195
20 1430 0.054 310 1110 0.051 225 800 0.048 153 640 0.074 189
VERTICAL
Material Group
ISO 513 P4 M4 K4 P4 P5 M4 M5 K4 S1
P5 P6 M5
K4 S2 S3
H1 H4 H5
Hardness/Rm 800-1000 N/mm² 900-1200 N/mm² 35-45 HRC ≤ 55 HRC
ap x ae D x 0.4D D x 0.4D D x 0.25D D x 0.25D
Vc (m/min) 80-100 60-80 40-60 30-50
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
64780 0.023 440 3720 0.021 310 2650 0.017 180 2120 0.016 140
83580 0.030 430 2790 0.027 300 1990 0.022 180 1590 0.021 130
10 2870 0.036 410 2230 0.032 290 1590 0.027 170 1270 0.025 130
12 2390 0.041 390 1860 0.037 270 1330 0.031 160 1060 0.029 120
14 2050 0.046 380 1590 0.041 260 1140 0.034 160 910 0.032 120
16 1790 0.051 370 1390 0.046 260 1000 0.038 150 800 0.036 110
20 1430 0.062 350 1110 0.056 250 800 0.047 150 640 0.043 110
PARAMETERS SUGGESTED WITH HIGH POWER MILLING CHUCK AND STABLE MACHINING CONDITION
HF HARD - Unequal pitch - 45° chamfer
466
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
CUTTING PARAMETERS
HF850
TROCHOIDAL
Material Group
ISO 513 P4 M4 K4 P4 P5 M4 M5 K4 S1
P5 P6 M5
K4 S2 S3
H1 H4 H5
Hardness/Rm 800-1000 N/mm² 900-1200 N/mm² 35-45 HRC ≤ 55 HRC
ap x ae 2D x 0.2D 2D x 0.1D 1.5D x 0.1D 1.5D x 0.1D
Vc (m/min) 130-150 100-120 70-90 50-70
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
37430 0.030 880 5840 0.027 630 4250 0.024 400 3180 0.033 420
45570 0.039 880 4380 0.035 620 3180 0.031 400 2390 0.043 410
54460 0.049 870 3500 0.044 620 2550 0.039 400 1910 0.054 410
63720 0.057 850 2920 0.052 600 2120 0.046 390 1590 0.063 400
82790 0.074 830 2190 0.067 590 1590 0.060 380 1190 0.082 390
10 2230 0.089 800 1750 0.080 560 1270 0.071 360 960 0.098 380
12 1860 0.102 760 1460 0.092 540 1060 0.082 350 800 0.112 360
14 1590 0.115 730 1250 0.103 520 910 0.092 330 680 0.126 340
16 1390 0.128 710 1090 0.115 500 800 0.102 330 600 0.140 340
20 1110 0.155 690 880 0.140 490 640 0.124 320 480 0.171 330
ap x ae ≤ D5 1.5D x 0.1D 1.5D x 0.1D D x 0.1D D x 0.05D
NOTES:
Down milling CNC programming is required.
“ae” value max 0.2xD - “T” value max 0.1xD.
The use of end mill with diameter 30-40% smaller than the width of the slot is recommended.
The cutting conditions are based on CNC programming with medium dynamic speed.
With lower CNC dynamic speed, use the same cutting conditions or reduce the cutting speed Vc.
With higher CNC dynamic speed, reduce the “T” value by approximately -30 -50% and apply the maximum available cutting speed Vc.
X (+)
Y (+) Y
R1 Cutter radius
R2 Half of slot width
T Programming width of cut
ae Actual width of cut
ae
T
R2
R1
PARAMETERS SUGGESTED WITH HIGH POWER MILLING CHUCK AND STABLE MACHINING CONDITION
HF HARD - Unequal pitch - 45° chamfer
467
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
h stock standard f non-standard stock m stock exhaustion
D D Tol. C45° C45° Tol. d(h6) l l1 d1 L z EDP No. Stock
30/-0.030 0.10 +/-0.020 6 9 15 2.80 57 4 HF450030 h
40/-0.030 0.10 +/-0.020 6 11 18 3.80 57 4 HF450040 h
50/-0.030 0.10 +/-0.020 6 13 19 4.80 57 4 HF450050 h
60/-0.030 0.10 +/-0.020 6 13 20 5.80 57 4 HF450060 h
80/-0.030 0.20 +/-0.020 8 20 26 7.80 64 4 HF450080 h
10 0/-0.030 0.20 +/-0.020 10 22 30 9.80 72 4 HF450100 h
12 0/-0.030 0.20 +/-0.020 12 26 36 11.80 83 4 HF450120 h
14 0/-0.030 0.20 +/-0.020 14 26 36 13.70 83 4 HF450140 h
16 0/-0.030 0.30 +/-0.020 16 32 42 15.70 92 4 HF450160 h
20 0/-0.030 0.40 +/-0.020 20 38 50 19.70 104 4 HF450200 h
HF450
cylindrical shank and reduced neck, 45° chamfer
OSAWA
NORM
PMKNSH
+++ ++
+ 1st choice , suitable
SLOTTING
SIDE MILLING
HELICAL RAMPING VERTICAL
TROCHOIDAL
C45°
C45°
HF HARD - Unequal pitch - 45° chamfer
468
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
CUTTING PARAMETERS
HF450
SLOTTING
Material Group
ISO 513 P4 M4 K4 P4 P5 M4 M5 K4 S1
P5 P6 M5
K4 S2 S3
H1 H4 H5
Hardness/Rm 800-1000 N/mm² 900-1200 N/mm² 35-45 HRC ≤ 55 HRC
ap x ae 0.5D x D 0.5D x D 0.3D x D 0.2D x D
Vc (m/min) 70-90 50-70 30-50 20-40
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
38490 0.011 360 6370 0.010 250 4250 0.008 140 3180 0.007 100
46370 0.014 360 4780 0.013 240 3180 0.011 140 2390 0.010 90
55100 0.018 360 3820 0.016 240 2550 0.013 130 1910 0.012 90
64250 0.021 350 3180 0.019 240 2120 0.015 130 1590 0.014 90
83180 0.027 340 2390 0.024 230 1590 0.020 130 1190 0.019 90
10 2550 0.032 330 1910 0.029 220 1270 0.024 120 960 0.022 90
12 2120 0.037 310 1590 0.033 210 1060 0.028 120 800 0.026 80
14 1820 0.041 300 1360 0.037 200 910 0.031 110 680 0.029 80
16 1590 0.046 290 1190 0.041 200 800 0.034 110 600 0.032 80
20 1270 0.056 280 960 0.050 190 640 0.042 110 480 0.039 80
ap x ae ≤ D5 0.3D x D 0.3D x D 0.2D x D 0.1D x D
SIDE MILLING
Material Group
ISO 513 P4 M4 K4 P4 P5 M4 M5 K4 S1
P5 P6 M5
K4 S2 S3
H1 H4 H5
Hardness/Rm 800-1000 N/mm² 900-1200 N/mm² 35-45 HRC ≤ 55 HRC
ap x ae 1.5D x 0.3D 1.5D x 0.2D 1.2D x 0.2D D x 0.1D
Vc (m/min) 90-110 60-80 40-60 30-50
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
310620 0.013 550 7430 0.012 340 5310 0.010 220 4250 0.014 240
47960 0.017 540 5570 0.015 340 3980 0.014 220 3180 0.019 240
56370 0.021 540 4460 0.019 340 3180 0.017 210 2550 0.023 240
65310 0.025 530 3720 0.022 330 2650 0.020 210 2120 0.027 230
83980 0.032 510 2790 0.029 320 1990 0.026 200 1590 0.035 220
10 3180 0.039 490 2230 0.035 310 1590 0.031 200 1270 0.042 220
12 2650 0.044 470 1860 0.040 300 1330 0.035 190 1060 0.048 210
14 2270 0.050 450 1590 0.045 280 1140 0.040 180 910 0.055 200
16 1990 0.055 440 1390 0.050 280 1000 0.044 180 800 0.061 190
20 1590 0.067 430 1110 0.060 270 800 0.054 170 640 0.074 190
ap x ae ≤ D5 1.2D x 0.2D 1.2D x 0.1D D x 0.1D D x 0.05D
HELICAL
Material Group
ISO 513 P4 M4 K4 P4 P5 M4 M5 K4 S1
P5 P6 M5
K4 S2 S3
H1 H4 H5
Hardness/Rm 800-1000 N/mm² 900-1200 N/mm² 35-45 HRC ≤ 55 HRC
_° x ae 5° x 0.4D 4° x 0.4D 3° x 0.4D 2° x 0.4D
Vc (m/min) 70-90 50-70 30-50 20-40
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
38490 0.008 265 6370 0.007 185 4250 0.006 109 3180 0.007 86
46370 0.010 265 4780 0.010 185 3180 0.008 108 2390 0.009 86
55100 0.013 260 3820 0.012 185 2550 0.011 108 1910 0.011 85
64250 0.015 255 3180 0.014 180 2120 0.012 105 1590 0.013 83
83180 0.019 250 2390 0.018 175 1590 0.016 102 1190 0.017 81
10 2550 0.023 240 1910 0.022 165 1270 0.019 98 960 0.020 78
12 2120 0.027 225 1590 0.025 160 1060 0.022 93 800 0.023 74
14 1820 0.030 220 1360 0.028 155 910 0.025 90 680 0.026 71
16 1590 0.033 215 1190 0.031 150 800 0.028 88 600 0.029 70
20 1270 0.041 205 960 0.038 145 640 0.034 86 480 0.035 68
_° ≤ D5 2° 2° 1° 1°
PARAMETERS SUGGESTED WITH HIGH POWER MILLING CHUCK AND STABLE MACHINING CONDITION
HF HARD - Unequal pitch - 45° chamfer
469
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
CUTTING PARAMETERS
HF450
RAMPING
Material Group
ISO 513 P4 M4 K4 P4 P5 M4 M5 K4 S1
P5 P6 M5
K4 S2 S3
H1 H4 H5
Hardness/Rm 800-1000 N/mm² 900-1200 N/mm² 35-45 HRC ≤ 55 HRC
_° x ae 5° x D 4° x D 3° x D 2° x D
Vc (m/min) 60-80 50-60 30-40 20-30
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
63720 0.018 270 2920 0.017 195 1860 0.016 118 1330 0.025 131
82790 0.023 260 2190 0.022 190 1390 0.021 114 1000 0.032 128
10 2230 0.028 250 1750 0.026 185 1110 0.025 110 800 0.038 123
12 1860 0.032 240 1460 0.030 175 930 0.028 105 660 0.044 116
14 1590 0.036 230 1250 0.034 170 800 0.032 102 570 0.049 112
16 1390 0.040 225 1090 0.037 165 700 0.035 99 500 0.055 109
20 1110 0.049 215 880 0.045 160 560 0.043 96 400 0.067 107
VERTICAL
Material Group
ISO 513 P4 M4 K4 P4 P5 M4 M5 K4 S1
P5 P6 M5
K4 S2 S3
H1 H4 H5
Hardness/Rm 800-1000 N/mm² 900-1200 N/mm² 35-45 HRC ≤ 55 HRC
ap x ae D x 0.4D D x 0.4D D x 0.25D D x 0.25D
Vc (m/min) 60-80 50-60 30-40 20-30
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
63720 0.021 310 2920 0.019 220 1860 0.015 120 1330 0.014 80
82790 0.027 300 2190 0.024 210 1390 0.020 110 1000 0.019 70
10 2230 0.032 290 1750 0.029 200 1110 0.024 110 800 0.022 70
12 1860 0.037 270 1460 0.033 190 930 0.028 100 660 0.026 70
14 1590 0.041 260 1250 0.037 190 800 0.031 100 570 0.029 70
16 1390 0.046 260 1090 0.041 180 700 0.034 100 500 0.032 60
20 1110 0.056 250 880 0.050 180 560 0.042 90 400 0.039 60
PARAMETERS SUGGESTED WITH HIGH POWER MILLING CHUCK AND STABLE MACHINING CONDITION
HF HARD - Unequal pitch - 45° chamfer
470
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
CUTTING PARAMETERS
HF450
TROCHOIDAL
Material Group
ISO 513 P4 M4 K4 P4 P5 M4 M5 K4 S1
P5 P6 M5
K4 S2 S3
H1 H4 H5
Hardness/Rm 800-1000 N/mm² 900-1200 N/mm² 35-45 HRC ≤ 55 HRC
ap x ae 1.5D x 0.1D 1.5D x 0.1D D x 0.1D D x 0.1D
Vc (m/min) 110-130 80-100 50-70 40-60
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
36900 0.027 740 5310 0.024 510 3180 0.021 270 2650 0.029 310
45180 0.035 730 3980 0.032 510 2390 0.028 270 1990 0.039 310
54140 0.044 730 3180 0.040 500 1910 0.035 270 1590 0.048 310
63450 0.052 710 2650 0.046 490 1590 0.041 260 1330 0.057 300
82590 0.067 690 1990 0.060 480 1190 0.054 250 1000 0.074 290
10 2070 0.080 670 1590 0.072 460 960 0.064 250 800 0.088 280
12 1730 0.092 640 1330 0.083 440 800 0.073 240 660 0.101 270
14 1480 0.103 610 1140 0.093 420 680 0.083 220 570 0.114 260
16 1290 0.115 590 1000 0.103 410 600 0.092 220 500 0.126 250
20 1040 0.140 580 800 0.126 400 480 0.112 210 400 0.154 250
ap x ae ≤ D5 1.5D x 0.1D 1.5D x 0.1D D x 0.1D D x 0.05D
NOTES:
Down milling CNC programming is required.
“ae” value max 0.2xD - “T” value max 0.1xD.
The use of end mill with diameter 30-40% smaller than the width of the slot is recommended.
The cutting conditions are based on CNC programming with medium dynamic speed.
With lower CNC dynamic speed, use the same cutting conditions or reduce the cutting speed Vc.
With higher CNC dynamic speed, reduce the “T” value by approximately -30 -50% and apply the maximum available cutting speed Vc.
X (+)
Y (+) Y
R1 Cutter radius
R2 Half of slot width
T Programming width of cut
ae Actual width of cut
ae
T
R2
R1
PARAMETERS SUGGESTED WITH HIGH POWER MILLING CHUCK AND STABLE MACHINING CONDITION
HF HARD - Unequal pitch - 45° chamfer
471
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
h stock standard f non-standard stock m stock exhaustion
D D Tol. C45° C45° Tol. d(h6) l l1 d1 L z EDP No. Stock
30/-0.030 0.10 +/-0.020 6 9 15 2.80 57 4 HF451030 h
40/-0.030 0.10 +/-0.020 6 11 18 3.80 57 4 HF451040 h
50/-0.030 0.10 +/-0.020 6 13 19 4.80 57 4 HF451050 h
60/-0.030 0.10 +/-0.020 6 13 20 5.80 57 4 HF451060 h
80/-0.030 0.20 +/-0.020 8 20 26 7.80 64 4 HF451080 h
10 0/-0.030 0.20 +/-0.020 10 22 30 9.80 72 4 HF451100 h
12 0/-0.030 0.20 +/-0.020 12 26 36 11.80 83 4 HF451120 h
14 0/-0.030 0.20 +/-0.020 14 26 36 13.70 83 4 HF451140 h
16 0/-0.030 0.30 +/-0.020 16 32 42 15.70 92 4 HF451160 h
20 0/-0.030 0.40 +/-0.020 20 38 50 19.70 104 4 HF451200 h
HF451
weldon shank and reduced neck, 45° chamfer
OSAWA
NORM
PMKNSH
+++ ++
+ 1st choice , suitable
SLOTTING
SIDE MILLING
HELICAL RAMPING VERTICAL
TROCHOIDAL
C45°
C45°
HF HARD - Unequal pitch - 45° chamfer
472
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
CUTTING PARAMETERS
HF451
SLOTTING
Material Group
ISO 513 P4 M4 K4 P4 P5 M4 M5 K4 S1
P5 P6 M5
K4 S2 S3
H1 H4 H5
Hardness/Rm 800-1000 N/mm² 900-1200 N/mm² 35-45 HRC ≤ 55 HRC
ap x ae 0.5D x D 0.5D x D 0.3D x D 0.2D x D
Vc (m/min) 70-90 50-70 30-50 20-40
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
38490 0.011 360 6370 0.010 250 4250 0.008 140 3180 0.007 100
46370 0.014 360 4780 0.013 240 3180 0.011 140 2390 0.010 90
55100 0.018 360 3820 0.016 240 2550 0.013 130 1910 0.012 90
64250 0.021 350 3180 0.019 240 2120 0.015 130 1590 0.014 90
83180 0.027 340 2390 0.024 230 1590 0.020 130 1190 0.019 90
10 2550 0.032 330 1910 0.029 220 1270 0.024 120 960 0.022 90
12 2120 0.037 310 1590 0.033 210 1060 0.028 120 800 0.026 80
14 1820 0.041 300 1360 0.037 200 910 0.031 110 680 0.029 80
16 1590 0.046 290 1190 0.041 200 800 0.034 110 600 0.032 80
20 1270 0.056 280 960 0.050 190 640 0.042 110 480 0.039 80
ap x ae ≤ D5 0.3D x D 0.3D x D 0.2D x D 0.1D x D
SIDE MILLING
Material Group
ISO 513 P4 M4 K4 P4 P5 M4 M5 K4 S1
P5 P6 M5
K4 S2 S3
H1 H4 H5
Hardness/Rm 800-1000 N/mm² 900-1200 N/mm² 35-45 HRC ≤ 55 HRC
ap x ae 1.5D x 0.3D 1.5D x 0.2D 1.2D x 0.2D D x 0.1D
Vc (m/min) 90-110 60-80 40-60 30-50
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
310620 0.013 550 7430 0.012 340 5310 0.010 220 4250 0.014 240
47960 0.017 540 5570 0.015 340 3980 0.014 220 3180 0.019 240
56370 0.021 540 4460 0.019 340 3180 0.017 210 2550 0.023 240
65310 0.025 530 3720 0.022 330 2650 0.020 210 2120 0.027 230
83980 0.032 510 2790 0.029 320 1990 0.026 200 1590 0.035 220
10 3180 0.039 490 2230 0.035 310 1590 0.031 200 1270 0.042 220
12 2650 0.044 470 1860 0.040 300 1330 0.035 190 1060 0.048 210
14 2270 0.050 450 1590 0.045 280 1140 0.040 180 910 0.055 200
16 1990 0.055 440 1390 0.050 280 1000 0.044 180 800 0.061 190
20 1590 0.067 430 1110 0.060 270 800 0.054 170 640 0.074 190
ap x ae ≤ D5 1.2D x 0.2D 1.2D x 0.1D D x 0.1D D x 0.05D
HELICAL
Material Group
ISO 513 P4 M4 K4 P4 P5 M4 M5 K4 S1
P5 P6 M5
K4 S2 S3
H1 H4 H5
Hardness/Rm 800-1000 N/mm² 900-1200 N/mm² 35-45 HRC ≤ 55 HRC
_° x ae 5° x 0.4D 4° x 0.4D 3° x 0.4D 2° x 0.4D
Vc (m/min) 70-90 50-70 30-50 20-40
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
38490 0.008 265 6370 0.007 185 4250 0.006 109 3180 0.007 86
46370 0.010 265 4780 0.010 185 3180 0.008 108 2390 0.009 86
55100 0.013 260 3820 0.012 185 2550 0.011 108 1910 0.011 85
64250 0.015 255 3180 0.014 180 2120 0.012 105 1590 0.013 83
83180 0.019 250 2390 0.018 175 1590 0.016 102 1190 0.017 81
10 2550 0.023 240 1910 0.022 165 1270 0.019 98 960 0.020 78
12 2120 0.027 225 1590 0.025 160 1060 0.022 93 800 0.023 74
14 1820 0.030 220 1360 0.028 155 910 0.025 90 680 0.026 71
16 1590 0.033 215 1190 0.031 150 800 0.028 88 600 0.029 70
20 1270 0.041 205 960 0.038 145 640 0.034 86 480 0.035 68
_° ≤ D5 2° 2° 1° 1°
PARAMETERS SUGGESTED WITH HIGH PRECISION WELDON CHUCK AND STABLE MACHINING CONDITION.
FOR APPLICATION ON HIGH POWER MILLING CHUCK, PLEASE REFER TO HF450 PARAMETERS.
HF HARD - Unequal pitch - 45° chamfer
473
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
CUTTING PARAMETERS
HF451
RAMPING
Material Group
ISO 513 P4 M4 K4 P4 P5 M4 M5 K4 S1
P5 P6 M5
K4 S2 S3
H1 H4 H5
Hardness/Rm 800-1000 N/mm² 900-1200 N/mm² 35-45 HRC ≤ 55 HRC
_° x ae 5° x D 4° x D 3° x D 2° x D
Vc (m/min) 60-80 50-60 30-40 20-30
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
63720 0.018 270 2920 0.017 195 1860 0.016 118 1330 0.025 131
82790 0.023 260 2190 0.022 190 1390 0.021 114 1000 0.032 128
10 2230 0.028 250 1750 0.026 185 1110 0.025 110 800 0.038 123
12 1860 0.032 240 1460 0.030 175 930 0.028 105 660 0.044 116
14 1590 0.036 230 1250 0.034 170 800 0.032 102 570 0.049 112
16 1390 0.040 225 1090 0.037 165 700 0.035 99 500 0.055 109
20 1110 0.049 215 880 0.045 160 560 0.043 96 400 0.067 107
VERTICAL
Material Group
ISO 513 P4 M4 K4 P4 P5 M4 M5 K4 S1
P5 P6 M5
K4 S2 S3
H1 H4 H5
Hardness/Rm 800-1000 N/mm² 900-1200 N/mm² 35-45 HRC ≤ 55 HRC
ap x ae D x 0.4D D x 0.4D D x 0.25D D x 0.25D
Vc (m/min) 60-80 50-60 30-40 20-30
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
63720 0.021 310 2920 0.019 220 1860 0.015 120 1330 0.014 80
82790 0.027 300 2190 0.024 210 1390 0.020 110 1000 0.019 70
10 2230 0.032 290 1750 0.029 200 1110 0.024 110 800 0.022 70
12 1860 0.037 270 1460 0.033 190 930 0.028 100 660 0.026 70
14 1590 0.041 260 1250 0.037 190 800 0.031 100 570 0.029 70
16 1390 0.046 260 1090 0.041 180 700 0.034 100 500 0.032 60
20 1110 0.056 250 880 0.050 180 560 0.042 90 400 0.039 60
PARAMETERS SUGGESTED WITH HIGH PRECISION WELDON CHUCK AND STABLE MACHINING CONDITION.
FOR APPLICATION ON HIGH POWER MILLING CHUCK, PLEASE REFER TO HF450 PARAMETERS.
HF HARD - Unequal pitch - 45° chamfer
474
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
CUTTING PARAMETERS
HF451
TROCHOIDAL
Material Group
ISO 513 P4 M4 K4 P4 P5 M4 M5 K4 S1
P5 P6 M5
K4 S2 S3
H1 H4 H5
Hardness/Rm 800-1000 N/mm² 900-1200 N/mm² 35-45 HRC ≤ 55 HRC
ap x ae 1.5D x 0.1D 1.5D x 0.1D D x 0.1D D x 0.1D
Vc (m/min) 110-130 80-100 50-70 40-60
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
36900 0.027 740 5310 0.024 510 3180 0.021 270 2650 0.029 310
45180 0.035 730 3980 0.032 510 2390 0.028 270 1990 0.039 310
54140 0.044 730 3180 0.040 500 1910 0.035 270 1590 0.048 310
63450 0.052 710 2650 0.046 490 1590 0.041 260 1330 0.057 300
82590 0.067 690 1990 0.060 480 1190 0.054 250 1000 0.074 290
10 2070 0.080 670 1590 0.072 460 960 0.064 250 800 0.088 280
12 1730 0.092 640 1330 0.083 440 800 0.073 240 660 0.101 270
14 1480 0.103 610 1140 0.093 420 680 0.083 220 570 0.114 260
16 1290 0.115 590 1000 0.103 410 600 0.092 220 500 0.126 250
20 1040 0.140 580 800 0.126 400 480 0.112 210 400 0.154 250
ap x ae ≤ D5 1.5D x 0.1D 1.5D x 0.1D D x 0.1D D x 0.05D
NOTES:
Down milling CNC programming is required.
“ae” value max 0.2xD - “T” value max 0.1xD.
The use of end mill with diameter 30-40% smaller than the width of the slot is recommended.
The cutting conditions are based on CNC programming with medium dynamic speed.
With lower CNC dynamic speed, use the same cutting conditions or reduce the cutting speed Vc.
With higher CNC dynamic speed, reduce the “T” value by approximately -30 -50% and apply the maximum available cutting speed Vc.
X (+)
Y (+) Y
R1 Cutter radius
R2 Half of slot width
T Programming width of cut
ae Actual width of cut
ae
T
R2
R1
PARAMETERS SUGGESTED WITH HIGH PRECISION WELDON CHUCK AND STABLE MACHINING CONDITION.
FOR APPLICATION ON HIGH POWER MILLING CHUCK, PLEASE REFER TO HF450 PARAMETERS.
HF HARD - Unequal pitch - Corner radius
475
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
h stock standard f non-standard stock m stock exhaustion
D D Tol. CR CR Tol. d(h6) l l1 L z EDP No. Stock
40/-0.025 0.30 +/-0.010 6 11 57 4 HF85203040 h
40/-0.025 0.50 +/-0.010 6 11 57 4 HF85205040 h
50/-0.025 0.30 +/-0.010 6 15 57 4 HF85203050 h
50/-0.025 0.50 +/-0.010 6 15 57 4 HF85205050 h
60/-0.025 0.30 +/-0.010 6 13 57 4 HF85203060 h
60/-0.025 0.50 +/-0.010 6 13 57 4 HF85205060 h
60/-0.025 1.00 +/-0.010 6 13 57 4 HF85210060 h
80/-0.030 0.50 +/-0.010 8 20 64 4 HF85205080 h
80/-0.030 1.00 +/-0.010 8 20 64 4 HF85210080 h
10 0/-0.030 0.50 +/-0.010 10 22 72 4 HF85205100 h
10 0/-0.030 1.00 +/-0.010 10 22 72 4 HF85210100 h
12 0/-0.030 0.50 +/-0.010 12 26 83 4 HF85205120 h
12 0/-0.030 1.00 +/-0.010 12 26 83 4 HF85210120 h
12 0/-0.030 2.00 +/-0.010 12 26 83 4 HF85220120 h
12 0/-0.030 3.00 +/-0.010 12 26 83 4 HF85230120 h
14 0/-0.030 1.00 +/-0.010 14 26 83 4 HF85210140 h
16 0/-0.030 1.00 +/-0.010 16 32 92 4 HF85210160 h
16 0/-0.030 2.00 +/-0.010 16 32 92 4 HF85220160 h
20 0/-0.030 1.00 +/-0.010 20 38 104 4 HF85210200 h
20 0/-0.030 2.00 +/-0.010 20 38 104 4 HF85220200 h
HF852
cylindrical shank, corner radius
OSAWA
NORM
PMKNSH
+++ ++
+ 1st choice , suitable
SLOTTING
SIDE MILLING
HELICAL RAMPING VERTICAL
TROCHOIDAL
CR
CR
HF HARD - Unequal pitch - Corner radius
476
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
CUTTING PARAMETERS
HF852
SLOTTING
Material Group
ISO 513 P4 M4 K4 P4 P5 M4 M5 K4 S1
P5 P6 M5
K4 S2 S3
H1 H4 H5
Hardness/Rm 800-1000 N/mm² 900-1200 N/mm² 35-45 HRC ≤ 55 HRC
ap x ae 0.5D x D 0.5D x D 0.3D x D 0.2D x D
Vc (m/min) 80-100 60-80 40-60 30-50
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
47170 0.016 450 5570 0.014 320 3980 0.012 190 3180 0.011 140
55730 0.020 450 4460 0.018 310 3180 0.015 190 2550 0.014 140
64780 0.023 440 3720 0.021 310 2650 0.017 180 2120 0.016 140
83580 0.030 430 2790 0.027 300 1990 0.022 180 1590 0.021 130
10 2870 0.036 410 2230 0.032 290 1590 0.027 170 1270 0.025 130
12 2390 0.041 390 1860 0.037 270 1330 0.031 160 1060 0.029 120
14 2050 0.046 380 1590 0.041 260 1140 0.034 160 910 0.032 120
16 1790 0.051 370 1390 0.046 260 1000 0.038 150 800 0.036 110
20 1430 0.062 350 1110 0.056 250 800 0.047 150 640 0.043 110
ap x ae ≤ D5 0.3D x D 0.3D x D 0.2D x D 0.1D x D
SIDE MILLING
Material Group
ISO 513 P4 M4 K4 P4 P5 M4 M5 K4 S1
P5 P6 M5
K4 S2 S3
H1 H4 H5
Hardness/Rm 800-1000 N/mm² 900-1200 N/mm² 35-45 HRC ≤ 55 HRC
ap x ae 1.5D x 0.3D 1.5D x 0.2D 1.2D x 0.2D 1.2D x 0.1D
Vc (m/min) 100-120 70-90 50-70 40-60
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
48760 0.019 660 6370 0.017 430 4780 0.015 290 3980 0.021 330
57010 0.023 660 5100 0.021 430 3820 0.019 290 3180 0.026 330
65840 0.028 640 4250 0.025 420 3180 0.022 280 2650 0.030 320
84380 0.036 630 3180 0.032 410 2390 0.029 270 1990 0.039 310
10 3500 0.043 600 2550 0.039 390 1910 0.034 260 1590 0.047 300
12 2920 0.049 570 2120 0.044 370 1590 0.039 250 1330 0.054 290
14 2500 0.055 550 1820 0.050 360 1360 0.044 240 1140 0.061 280
16 2190 0.061 540 1590 0.055 350 1190 0.049 230 1000 0.067 270
20 1750 0.074 520 1270 0.067 340 960 0.060 230 800 0.082 260
ap x ae ≤ D5 1.2D x 0.2D 1.2D x 0.1D D x 0.2D D x 0.1D
HELICAL
Material Group
ISO 513 P4 M4 K4 P4 P5 M4 M5 K4 S1
P5 P6 M5
K4 S2 S3
H1 H4 H5
Hardness/Rm 800-1000 N/mm² 900-1200 N/mm² 35-45 HRC ≤ 55 HRC
_° x ae 5° x 0.4D 4° x 0.4D 3° x 0.4D 2° x 0.4D
Vc (m/min) 80-100 60-80 40-60 30-50
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
47170 0.011 330 5570 0.011 240 3980 0.009 150 3180 0.010 126
55730 0.014 325 4460 0.013 235 3180 0.012 149 2550 0.012 126
64780 0.017 320 3720 0.016 230 2650 0.014 146 2120 0.015 123
83580 0.022 310 2790 0.020 225 1990 0.018 142 1590 0.019 120
10 2870 0.026 300 2230 0.024 215 1590 0.021 136 1270 0.023 115
12 2390 0.030 285 1860 0.028 205 1330 0.024 130 1060 0.026 109
14 2050 0.033 275 1590 0.031 200 1140 0.028 126 910 0.029 106
16 1790 0.037 265 1390 0.035 190 1000 0.031 122 800 0.032 103
20 1430 0.045 260 1110 0.042 185 800 0.037 119 640 0.039 100
_° ≤ D5 2° 2° 1° 1°
PARAMETERS SUGGESTED WITH HIGH POWER MILLING CHUCK AND STABLE MACHINING CONDITION
HF HARD - Unequal pitch - Corner radius
477
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
CUTTING PARAMETERS
HF852
RAMPING
Material Group
ISO 513 P4 M4 K4 P4 P5 M4 M5 K4 S1
P5 P6 M5
K4 S2 S3
H1 H4 H5
Hardness/Rm 800-1000 N/mm² 900-1200 N/mm² 35-45 HRC ≤ 55 HRC
_° x ae 5° x D 4° x D 3° x D 2° x D
Vc (m/min) 80-100 60-80 40-60 30-50
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
64780 0.020 385 3720 0.019 280 2650 0.018 187 2120 0.027 232
83580 0.026 370 2790 0.024 270 1990 0.023 182 1590 0.035 226
10 2870 0.031 360 2230 0.029 260 1590 0.027 175 1270 0.043 216
12 2390 0.036 340 1860 0.033 245 1330 0.031 167 1060 0.049 206
14 2050 0.040 330 1590 0.037 240 1140 0.035 161 910 0.055 199
16 1790 0.045 320 1390 0.042 230 1000 0.039 157 800 0.061 195
20 1430 0.054 310 1110 0.051 225 800 0.048 153 640 0.074 189
VERTICAL
Material Group
ISO 513 P4 M4 K4 P4 P5 M4 M5 K4 S1
P5 P6 M5
K4 S2 S3
H1 H4 H5
Hardness/Rm 800-1000 N/mm² 900-1200 N/mm² 35-45 HRC ≤ 55 HRC
ap x ae D x 0.4D D x 0.4D D x 0.25D D x 0.25D
Vc (m/min) 80-100 60-80 40-60 30-50
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
64780 0.023 440 3720 0.021 310 2650 0.017 180 2120 0.016 140
83580 0.030 430 2790 0.027 300 1990 0.022 180 1590 0.021 130
10 2870 0.036 410 2230 0.032 290 1590 0.027 170 1270 0.025 130
12 2390 0.041 390 1860 0.037 270 1330 0.031 160 1060 0.029 120
14 2050 0.046 380 1590 0.041 260 1140 0.034 160 910 0.032 120
16 1790 0.051 370 1390 0.046 260 1000 0.038 150 800 0.036 110
20 1430 0.062 350 1110 0.056 250 800 0.047 150 640 0.043 110
PARAMETERS SUGGESTED WITH HIGH POWER MILLING CHUCK AND STABLE MACHINING CONDITION
HF HARD - Unequal pitch - Corner radius
478
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
CUTTING PARAMETERS
HF852
TROCHOIDAL
Material Group
ISO 513 P4 M4 K4 P4 P5 M4 M5 K4 S1
P5 P6 M5
K4 S2 S3
H1 H4 H5
Hardness/Rm 800-1000 N/mm² 900-1200 N/mm² 35-45 HRC ≤ 55 HRC
ap x ae 2D x 0.2D 2D x 0.1D 1.5D x 0.1D 1.5D x 0.1D
Vc (m/min) 130-150 100-120 70-90 50-70
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
45570 0.039 880 4380 0.035 620 3180 0.031 400 2390 0.043 410
54460 0.049 870 3500 0.044 620 2550 0.039 400 1910 0.054 410
63720 0.057 850 2920 0.052 600 2120 0.046 390 1590 0.063 400
82790 0.074 830 2190 0.067 590 1590 0.060 380 1190 0.082 390
10 2230 0.089 800 1750 0.080 560 1270 0.071 360 960 0.098 380
12 1860 0.102 760 1460 0.092 540 1060 0.082 350 800 0.112 360
14 1590 0.115 730 1250 0.103 520 910 0.092 330 680 0.126 340
16 1390 0.128 710 1090 0.115 500 800 0.102 330 600 0.140 340
20 1110 0.155 690 880 0.140 490 640 0.124 320 480 0.171 330
ap x ae ≤ D5 1.5D x 0.1D 1.5D x 0.1D D x 0.1D D x 0.05D
NOTES:
Down milling CNC programming is required.
“ae” value max 0.2xD - “T” value max 0.1xD.
The use of end mill with diameter 30-40% smaller than the width of the slot is recommended.
The cutting conditions are based on CNC programming with medium dynamic speed.
With lower CNC dynamic speed, use the same cutting conditions or reduce the cutting speed Vc.
With higher CNC dynamic speed, reduce the “T” value by approximately -30 -50% and apply the maximum available cutting speed Vc.
X (+)
Y (+) Y
R1 Cutter radius
R2 Half of slot width
T Programming width of cut
ae Actual width of cut
ae
T
R2
R1
PARAMETERS SUGGESTED WITH HIGH POWER MILLING CHUCK AND STABLE MACHINING CONDITION
HF HARD - Unequal pitch - Corner radius
479
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
h stock standard f non-standard stock m stock exhaustion
D D Tol. CR CR Tol. d(h6) l l1 d1 L z EDP No. Stock
30/-0.030 0.30 +/-0.020 6 9 15 2.80 57 4 HF45203030 h
30/-0.030 0.50 +/-0.020 6 9 15 2.80 57 4 HF45205030 h
40/-0.030 0.30 +/-0.020 6 11 18 3.80 57 4 HF45203040 h
40/-0.030 0.50 +/-0.020 6 11 18 3.80 57 4 HF45205040 h
50/-0.030 0.50 +/-0.020 6 13 19 4.80 57 4 HF45205050 h
60/-0.030 0.50 +/-0.020 6 13 20 5.80 57 4 HF45205060 h
60/-0.030 1.00 +/-0.020 6 13 20 5.80 57 4 HF45210060 h
80/-0.030 0.50 +/-0.020 8 20 26 7.80 64 4 HF45205080 h
80/-0.030 1.00 +/-0.020 8 20 26 7.80 64 4 HF45210080 h
10 0/-0.030 0.50 +/-0.020 10 22 30 9.80 72 4 HF45205100 h
10 0/-0.030 1.00 +/-0.020 10 22 30 9.80 72 4 HF45210100 h
12 0/-0.030 0.50 +/-0.020 12 26 36 11.80 83 4 HF45205120 h
12 0/-0.030 1.00 +/-0.020 12 26 36 11.80 83 4 HF45210120 h
16 0/-0.030 1.00 +/-0.020 16 32 42 15.70 92 4 HF45210160 h
16 0/-0.030 2.00 +/-0.020 16 32 42 15.70 92 4 HF45220160 h
20 0/-0.030 1.00 +/-0.020 20 38 50 19.70 104 4 HF45210200 h
20 0/-0.030 2.00 +/-0.020 20 38 50 19.70 104 4 HF45220200 h
HF452
cylindrical shank and reduced neck, corner radius
OSAWA
NORM
PMKNSH
+++ ++
+ 1st choice , suitable
SLOTTING
SIDE MILLING
HELICAL RAMPING VERTICAL
TROCHOIDAL
CR
CR
HF HARD - Unequal pitch - Corner radius
480
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
CUTTING PARAMETERS
HF452
SLOTTING
Material Group
ISO 513 P4 M4 K4 P4 P5 M4 M5 K4 S1
P5 P6 M5
K4 S2 S3
H1 H4 H5
Hardness/Rm 800-1000 N/mm² 900-1200 N/mm² 35-45 HRC ≤ 55 HRC
ap x ae 0.5D x D 0.5D x D 0.3D x D 0.2D x D
Vc (m/min) 70-90 50-70 30-50 20-40
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
38490 0.011 360 6370 0.010 250 4250 0.008 140 3180 0.007 100
46370 0.014 360 4780 0.013 240 3180 0.011 140 2390 0.010 90
55100 0.018 360 3820 0.016 240 2550 0.013 130 1910 0.012 90
64250 0.021 350 3180 0.019 240 2120 0.015 130 1590 0.014 90
83180 0.027 340 2390 0.024 230 1590 0.020 130 1190 0.019 90
10 2550 0.032 330 1910 0.029 220 1270 0.024 120 960 0.022 90
12 2120 0.037 310 1590 0.033 210 1060 0.028 120 800 0.026 80
14 1820 0.041 300 1360 0.037 200 910 0.031 110 680 0.029 80
16 1590 0.046 290 1190 0.041 200 800 0.034 110 600 0.032 80
20 1270 0.056 280 960 0.050 190 640 0.042 110 480 0.039 80
ap x ae ≤ D5 0.3D x D 0.3D x D 0.2D x D 0.1D x D
SIDE MILLING
Material Group
ISO 513 P4 M4 K4 P4 P5 M4 M5 K4 S1
P5 P6 M5
K4 S2 S3
H1 H4 H5
Hardness/Rm 800-1000 N/mm² 900-1200 N/mm² 35-45 HRC ≤ 55 HRC
ap x ae 1.5D x 0.3D 1.5D x 0.2D 1.2D x 0.2D D x 0.1D
Vc (m/min) 90-110 60-80 40-60 30-50
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
310620 0.013 550 7430 0.012 340 5310 0.010 220 4250 0.014 240
47960 0.017 540 5570 0.015 340 3980 0.014 220 3180 0.019 240
56370 0.021 540 4460 0.019 340 3180 0.017 210 2550 0.023 240
65310 0.025 530 3720 0.022 330 2650 0.020 210 2120 0.027 230
83980 0.032 510 2790 0.029 320 1990 0.026 200 1590 0.035 220
10 3180 0.039 490 2230 0.035 310 1590 0.031 200 1270 0.042 220
12 2650 0.044 470 1860 0.040 300 1330 0.035 190 1060 0.048 210
14 2270 0.050 450 1590 0.045 280 1140 0.040 180 910 0.055 200
16 1990 0.055 440 1390 0.050 280 1000 0.044 180 800 0.061 190
20 1590 0.067 430 1110 0.060 270 800 0.054 170 640 0.074 190
ap x ae ≤ D5 1.2D x 0.2D 1.2D x 0.1D D x 0.1D D x 0.05D
HELICAL
Material Group
ISO 513 P4 M4 K4 P4 P5 M4 M5 K4 S1
P5 P6 M5
K4 S2 S3
H1 H4 H5
Hardness/Rm 800-1000 N/mm² 900-1200 N/mm² 35-45 HRC ≤ 55 HRC
_° x ae 5° x 0.4D 4° x 0.4D 3° x 0.4D 2° x 0.4D
Vc (m/min) 70-90 50-70 30-50 20-40
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
38490 0.008 265 6370 0.007 185 4250 0.006 109 3180 0.007 86
46370 0.010 265 4780 0.010 185 3180 0.008 108 2390 0.009 86
55100 0.013 260 3820 0.012 185 2550 0.011 108 1910 0.011 85
64250 0.015 255 3180 0.014 180 2120 0.012 105 1590 0.013 83
83180 0.019 250 2390 0.018 175 1590 0.016 102 1190 0.017 81
10 2550 0.023 240 1910 0.022 165 1270 0.019 98 960 0.020 78
12 2120 0.027 225 1590 0.025 160 1060 0.022 93 800 0.023 74
14 1820 0.030 220 1360 0.028 155 910 0.025 90 680 0.026 71
16 1590 0.033 215 1190 0.031 150 800 0.028 88 600 0.029 70
20 1270 0.041 205 960 0.038 145 640 0.034 86 480 0.035 68
_° ≤ D5 2° 2° 1° 1°
PARAMETERS SUGGESTED WITH HIGH POWER MILLING CHUCK AND STABLE MACHINING CONDITION
HF HARD - Unequal pitch - Corner radius
481
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
CUTTING PARAMETERS
HF452
RAMPING
Material Group
ISO 513 P4 M4 K4 P4 P5 M4 M5 K4 S1
P5 P6 M5
K4 S2 S3
H1 H4 H5
Hardness/Rm 800-1000 N/mm² 900-1200 N/mm² 35-45 HRC ≤ 55 HRC
_° x ae 5° x D 4° x D 3° x D 2° x D
Vc (m/min) 60-80 50-60 30-40 20-30
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
63720 0.018 270 2920 0.017 195 1860 0.016 118 1330 0.025 131
82790 0.023 260 2190 0.022 190 1390 0.021 114 1000 0.032 128
10 2230 0.028 250 1750 0.026 185 1110 0.025 110 800 0.038 123
12 1860 0.032 240 1460 0.030 175 930 0.028 105 660 0.044 116
14 1590 0.036 230 1250 0.034 170 800 0.032 102 570 0.049 112
16 1390 0.040 225 1090 0.037 165 700 0.035 99 500 0.055 109
20 1110 0.049 215 880 0.045 160 560 0.043 96 400 0.067 107
VERTICAL
Material Group
ISO 513 P4 M4 K4 P4 P5 M4 M5 K4 S1
P5 P6 M5
K4 S2 S3
H1 H4 H5
Hardness/Rm 800-1000 N/mm² 900-1200 N/mm² 35-45 HRC ≤ 55 HRC
ap x ae D x 0.4D D x 0.4D D x 0.25D D x 0.25D
Vc (m/min) 60-80 50-60 30-40 20-30
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
63720 0.021 310 2920 0.019 220 1860 0.015 120 1330 0.014 80
82790 0.027 300 2190 0.024 210 1390 0.020 110 1000 0.019 70
10 2230 0.032 290 1750 0.029 200 1110 0.024 110 800 0.022 70
12 1860 0.037 270 1460 0.033 190 930 0.028 100 660 0.026 70
14 1590 0.041 260 1250 0.037 190 800 0.031 100 570 0.029 70
16 1390 0.046 260 1090 0.041 180 700 0.034 100 500 0.032 60
20 1110 0.056 250 880 0.050 180 560 0.042 90 400 0.039 60
PARAMETERS SUGGESTED WITH HIGH POWER MILLING CHUCK AND STABLE MACHINING CONDITION
HF HARD - Unequal pitch - Corner radius
482
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
HF VH/UP
CUTTING PARAMETERS
HF452
TROCHOIDAL
Material Group
ISO 513 P4 M4 K4 P4 P5 M4 M5 K4 S1
P5 P6 M5
K4 S2 S3
H1 H4 H5
Hardness/Rm 800-1000 N/mm² 900-1200 N/mm² 35-45 HRC ≤ 55 HRC
ap x ae 1.5D x 0.1D 1.5D x 0.1D D x 0.1D D x 0.1D
Vc (m/min) 110-130 80-100 50-70 40-60
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
36900 0.027 740 5310 0.024 510 3180 0.021 270 2650 0.029 310
45180 0.035 730 3980 0.032 510 2390 0.028 270 1990 0.039 310
54140 0.044 730 3180 0.040 500 1910 0.035 270 1590 0.048 310
63450 0.052 710 2650 0.046 490 1590 0.041 260 1330 0.057 300
82590 0.067 690 1990 0.060 480 1190 0.054 250 1000 0.074 290
10 2070 0.080 670 1590 0.072 460 960 0.064 250 800 0.088 280
12 1730 0.092 640 1330 0.083 440 800 0.073 240 660 0.101 270
14 1480 0.103 610 1140 0.093 420 680 0.083 220 570 0.114 260
16 1290 0.115 590 1000 0.103 410 600 0.092 220 500 0.126 250
20 1040 0.140 580 800 0.126 400 480 0.112 210 400 0.154 250
ap x ae ≤ D5 1.5D x 0.1D 1.5D x 0.1D D x 0.1D D x 0.05D
NOTES:
Down milling CNC programming is required.
“ae” value max 0.2xD - “T” value max 0.1xD.
The use of end mill with diameter 30-40% smaller than the width of the slot is recommended.
The cutting conditions are based on CNC programming with medium dynamic speed.
With lower CNC dynamic speed, use the same cutting conditions or reduce the cutting speed Vc.
With higher CNC dynamic speed, reduce the “T” value by approximately -30 -50% and apply the maximum available cutting speed Vc.
X (+)
Y (+) Y
R1 Cutter radius
R2 Half of slot width
T Programming width of cut
ae Actual width of cut
ae
T
R2
R1
PARAMETERS SUGGESTED WITH HIGH POWER MILLING CHUCK AND STABLE MACHINING CONDITION
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
STAINLESS STEEL AND SUPER ALLOYS
Ultra-fine micrograin and Endless Black coating for high
performance machining on stainless steel, HRSA and titanium
alloy, carbon and low alloy steel. The unique design of the
cutting geometry and the Endless Black coating are specifically
developed to control the cutting friction delivering longer tool
life through the reduction of the heat generation.
Micrograna ultrafine e rivestimento Endless Black per
la lavorazione ad alto rendimento di acciai al carbonio,
acciai inossidabili, HRSA e leghe di titanio. La geometria e il
rivestimento specifici consentono di generare bassi sforzi di
taglio e l'abbassamento del coefficiente di attrito, garantendo
una riduzione dello sviluppo del calore con conseguente
rallentamento del processo di usura del tagliente.
Besonders feine Mikrokörnung und Beschichtung Endless
Black für Hochleistungsbearbeitungen von Kohlenstoffstahl,
Edelstahl, HRSA und Titanlegierungen. Dank der speziellen
Geometrie und der spezifischen Beschichtung werden ein
niedriger Schneiddruck erzeugt und der Reibungsfaktor
gesenkt, wodurch die Hitzeentwicklung reduziert und in Folge
die Abnutzung der Schneidkante verzögert werden.
Ultra Micrograin et revêtement Endless Black pour l’usinage
à haute performance pour les aciers au carbone, aciers
inoxydables, HRSA et alliages de titane. La géométrie et le
revêtement spécifiques permettent de générer peu d’efforts
de coupe et de réduire le coefficient de frottement, en
garantissant une diminution du développement de la chaleur
et le ralentissement consécutif du processus d’usure de l’arête.
Micrograno ultrafino y revestimiento Endless Black para el
mecanizado a alto rendimiento de aceros al carbono, aceros
inoxidables, HRSA y aleaciones de titanio. La geometría y
revestimiento específicos permiten generar bajos esfuerzos de
corte y reducción del coeficiente de rozamiento, garantizando
una reducción del desarrollo de calor con la consiguiente
ralentización del proceso de desgaste del filo.
Микрозернистая супермелкая структура твердого сплава
и покрытие Endless Black служат для высокоэффективной
обработки нержавеющей стали, жаропрочных и
титановых сплавов, низко- и высокоуглеродистых сталей.
Специальные геометрия и покрытие позволяют снизить
трение и тепловыделение при резании и, тем самым,
увеличить стойкость инструмента.
MEF - Stainless steel and super alloys
484
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
h stock standard f non-stock standard m stock exhaustion
MEFCS2
cylindrical shank, 2 flutes
OSAWA
NORM
<45
HRC
PMKNSH
++ +
+ 1st choice , suitable
SLOTTING
SIDE MILLING
DRILLING
D D Tol. C C Tol. d(h6) l l1 L z EDP No. Stock
10/-0.030 4 2.5 40 2 MEFCS2010 h
1.5 0/-0.030 4 4 40 2 MEFCS2015 h
20/-0.030 4 6 40 2 MEFCS2020 h
2.5 0/-0.030 4 8 40 2 MEFCS2025 h
30/-0.030 6 8 45 2 MEFCS2030 h
40/-0.030 6 11 45 2 MEFCS2040 h
50/-0.030 6 13 50 2 MEFCS2050 h
60/-0.030 6 13 50 2 MEFCS2060 h
80/-0.030 8 19 60 2 MEFCS2080 h
10 0/-0.030 10 22 70 2 MEFCS2100 h
12 0/-0.030 12 26 75 2 MEFCS2120 h
14 0/-0.030 14 26 85 2 MEFCS2140 h
16 0/-0.030 16 32 100 2 MEFCS2160 h
MEF - Stainless steel and super alloys
485
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
CUTTING PARAMETERS
MEFCS2
SLOTTING
Material Group
ISO 513 P1 P2 P3 P4 M1 M2 P5 M3 M4 S1 S2 S4 M5 S3 S5
Hardness/Rm < 700 N/mm² 700-1000 N/mm² < 35 HRC < 45 HRC
ap x ae 0.5D x D 0.5D x D 0.3D x D 0.2D x D
Vc (m/min) 90-110 50-70 30-50 20-40
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
131850 0.005 290 19110 0.004 150 12740 0.004 90 9550 0.004 70
215920 0.009 290 9550 0.008 150 6370 0.007 90 4780 0.007 70
310620 0.012 240 6370 0.010 120 4250 0.009 80 3180 0.009 60
47960 0.017 270 4780 0.015 140 3180 0.014 90 2390 0.014 70
56370 0.023 290 3820 0.020 150 2550 0.018 90 1910 0.018 70
65310 0.029 310 3180 0.024 160 2120 0.023 100 1590 0.023 70
83980 0.035 270 2390 0.029 140 1590 0.028 90 1190 0.028 70
10 3180 0.040 260 1910 0.034 130 1270 0.032 80 960 0.032 60
12 2650 0.046 240 1590 0.039 120 1060 0.037 80 800 0.037 60
14 2270 0.052 230 1360 0.044 120 910 0.041 80 680 0.041 60
16 1990 0.058 230 1190 0.049 120 800 0.046 70 600 0.046 60
< D3 mm: ap = 0.1D - 0.2D
SIDE MILLING
Material Group
ISO 513 P1 P2 P3 P4 M1 M2 P5 M3 M4 S1 S2 S4 M5 S3 S5
Hardness/Rm < 700 N/mm² 700-1000 N/mm² < 35 HRC < 45 HRC
ap x ae 1.5D x 0.5D 1.5D x 0.5D D x 0.3D D x 0.1D
Vc (m/min) 90-110 60-80 40-60 30-50
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
131850 0.006 350 22290 0.005 210 15920 0.004 140 12740 0.004 110
215920 0.011 350 11150 0.009 210 7960 0.009 140 6370 0.009 110
310620 0.014 290 7430 0.012 170 5310 0.011 120 4250 0.011 90
47960 0.021 330 5570 0.018 200 3980 0.017 130 3180 0.017 110
56370 0.028 350 4460 0.023 210 3180 0.022 140 2550 0.022 110
65310 0.035 370 3720 0.029 220 2650 0.028 150 2120 0.028 120
83980 0.041 330 2790 0.035 200 1990 0.033 130 1590 0.033 110
10 3180 0.048 310 2230 0.041 180 1590 0.039 120 1270 0.039 100
12 2650 0.055 290 1860 0.047 170 1330 0.044 120 1060 0.044 90
14 2270 0.062 280 1590 0.053 170 1140 0.050 110 910 0.050 90
16 1990 0.069 270 1390 0.059 160 1000 0.055 110 800 0.055 90
< D3 mm: ae = 0.05D - 0.2D
DRILLING
Material Group
ISO 513 P1 P2 P3 P4 M1 M2 P5 M3 M4 S1 S2 S4 M5 S3 S5
Hardness/Rm < 700 N/mm² 700-1000 N/mm² < 35 HRC < 45 HRC
ap x ae D x D D x D 0.5D x D 0.2D x D
Vc (m/min) 90-110 50-70 30-50 20-40
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
131850 0.003 180 19110 0.002 90 12740 0.002 60 9550 0.022 420
215920 0.006 180 9550 0.005 90 6370 0.004 60 4780 0.044 420
310620 0.007 150 6370 0.006 70 4250 0.006 50 3180 0.055 350
47960 0.010 160 4780 0.009 80 3180 0.008 50 2390 0.083 400
56370 0.014 180 3820 0.012 90 2550 0.011 60 1910 0.110 420
65310 0.017 180 3180 0.015 90 2120 0.014 60 1590 0.138 440
83980 0.021 160 2390 0.018 80 1590 0.017 50 1190 0.166 390
10 3180 0.024 150 1910 0.021 80 1270 0.019 50 960 0.193 370
12 2650 0.028 150 1590 0.023 70 1060 0.022 50 800 0.221 350
14 2270 0.031 140 1360 0.026 70 910 0.025 50 680 0.248 340
16 1990 0.035 140 1190 0.029 70 800 0.028 40 600 0.276 330
< D3 mm: ap = 0.1D - 0.2D
MEF - Stainless steel and super alloys
486
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
h stock standard f non-stock standard m stock exhaustion
MEFCSH3
cylindrical shank, 3 flutes
OSAWA
NORM
<45
HRC
≤ Ø18 > Ø18
PMKNSH
++ +
+ 1st choice , suitable
SLOTTING
SIDE MILLING
D D Tol. C C Tol. d(h6) l l1 L z EDP No. Stock
60/-0.030 6 13 50 3 MEFCSH3060 h
80/-0.030 8 19 60 3 MEFCSH3080 h
10 0/-0.030 10 22 70 3 MEFCSH3100 h
12 0/-0.030 12 26 75 3 MEFCSH3120 h
16 0/-0.030 16 32 100 3 MEFCSH3160 h
18 0/-0.030 18 32 90 3 MEFCSH3180 h
20 0/-0.030 20 38 105 4 MEFCSH4200 h
MEF - Stainless steel and super alloys
487
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
CUTTING PARAMETERS
MEFCSH3
SLOTTING
Material Group
ISO 513 P1 P2 P3 P4 M1 M2 P5 M3 M4 S1 S2 S4 M5 S3 S5
Hardness/Rm < 700 N/mm² 700-1000 N/mm² < 35 HRC < 45 HRC
ap x ae 0.5D x D 0.5D x D 0.3D x D 0.2D x D
Vc (m/min) 80-100 60-80 40-60 30-50
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
64780 0.022 220 3720 0.013 140 2650 0.012 100 2120 0.012 80
83580 0.029 210 2790 0.017 140 1990 0.015 90 1590 0.016 80
10 2870 0.036 220 2230 0.021 140 1590 0.019 90 1270 0.020 80
12 2390 0.046 230 1860 0.027 150 1330 0.024 100 1060 0.026 80
14 2050 0.053 230 1590 0.031 150 1140 0.028 90 910 0.030 80
16 1790 0.065 240 1390 0.038 160 1000 0.034 100 800 0.036 90
18 1590 0.075 250 1240 0.044 160 880 0.039 100 710 0.042 90
20 1430 0.086 260 1110 0.051 170 800 0.045 110 640 0.048 90
SIDE MILLING
Material Group
ISO 513 P1 P2 P3 P4 M1 M2 P5 M3 M4 S1 S2 S4 M5 S3 S5
Hardness/Rm < 700 N/mm² 700-1000 N/mm² < 35 HRC < 45 HRC
ap x ae 1.5D x 0.3D 1.5D x 0.3D 1.5D x 0.2D 1.5D x 0.1D
Vc (m/min) 80-120 60-80 40-60 100-140
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
64780 0.026 260 3720 0.015 170 2650 0.014 110 2120 0.014 90
83580 0.035 260 2790 0.020 170 1990 0.019 110 1590 0.019 90
10 2870 0.043 260 2230 0.026 170 1590 0.024 110 1270 0.024 90
12 2390 0.055 280 1860 0.033 180 1330 0.031 120 1060 0.031 100
14 2050 0.064 270 1590 0.038 180 1140 0.036 120 910 0.036 100
16 1790 0.078 290 1390 0.046 190 1000 0.043 130 800 0.043 100
18 1590 0.090 300 1240 0.053 200 880 0.050 130 710 0.050 110
20 1430 0.104 310 1110 0.061 200 800 0.058 140 640 0.058 110
MEF - Stainless steel and super alloys
488
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
h stock standard f non-stock standard m stock exhaustion
MEFCS4
cylindrical shank, 4 flutes
OSAWA
NORM
<45
HRC
PMKNSH
++ +
+ 1st choice , suitable
SIDE MILLING
D D Tol. C C Tol. d(h6) l l1 L z EDP No. Stock
20/-0.030 4 6 40 4 MEFCS4020 h
2.5 0/-0.030 4 8 40 4 MEFCS4025 h
30/-0.030 6 8 45 4 MEFCS4030 h
40/-0.030 6 11 45 4 MEFCS4040 h
50/-0.030 6 13 50 4 MEFCS4050 h
60/-0.030 6 13 50 4 MEFCS4060 h
80/-0.030 8 19 60 4 MEFCS4080 h
10 0/-0.030 10 22 70 4 MEFCS4100 h
12 0/-0.030 12 26 75 4 MEFCS4120 h
14 0/-0.030 14 26 85 4 MEFCS4140 h
16 0/-0.030 16 32 100 4 MEFCS4160 h
20 0/-0.030 20 38 105 4 MEFCS4200 h
MEF - Stainless steel and super alloys
489
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
CUTTING PARAMETERS
MEFCS4
SIDE MILLING
Material Group
ISO 513 P1 P2 P3 P4 M1 M2 P5 M3 M4 S1 S2 S4 M5 S3 S5
Hardness/Rm < 700 N/mm² 700-1000 N/mm² < 35 HRC < 45 HRC
ap x ae 1.5D x 0.1D 1.5D x 0.1D 1.5D x 0.1D 1.5D x 0.1D
Vc (m/min) 90-110 60-80 40-60 30-50
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
310620 0.012 510 7430 0.010 300 5310 0.010 200 4250 0.010 160
47960 0.015 480 5570 0.013 280 3980 0.012 190 3180 0.012 150
56370 0.018 460 4460 0.015 270 3180 0.014 180 2550 0.014 150
65310 0.023 490 3720 0.020 290 2650 0.018 200 2120 0.018 160
83980 0.030 480 2790 0.026 280 1990 0.024 190 1590 0.024 150
10 3180 0.038 480 2230 0.032 290 1590 0.030 190 1270 0.030 150
12 2650 0.045 480 1860 0.038 280 1330 0.036 190 1060 0.036 150
14 2270 0.052 470 1590 0.044 280 1140 0.042 190 910 0.042 150
16 1990 0.058 460 1390 0.049 270 1000 0.046 190 800 0.046 150
18 1770 0.066 470 1240 0.056 280 880 0.053 190 710 0.053 150
20 1590 0.075 480 1110 0.064 280 800 0.060 190 640 0.060 150
MEF - Stainless steel and super alloys
490
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
h stock standard f non-stock standard m stock exhaustion
MEF600
cylindrical shank, multi flute
OSAWA
NORM
<45
HRC
PMKNSH
++ +
+ 1st choice , suitable
SIDE MILLING
D D Tol. C C Tol. d(h6) l l1 L z EDP No. Stock
60/-0.030 6 13 57 6 MEF600060 h
80/-0.030 8 19 63 6 MEF600080 h
10 0/-0.030 10 22 72 6 MEF600100 h
12 0/-0.030 12 26 83 6 MEF600120 h
16 0/-0.030 16 32 92 6 MEF600160 h
20 0/-0.030 20 38 104 8 MEF600200 h
MEF - Stainless steel and super alloys
491
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
CUTTING PARAMETERS
MEF600
SIDE MILLING
Material Group
ISO 513 P1 P2 P3 P4 M1 M2 P5 M3 M4 S1 S2 S4 M5 S3 S5
Hardness/Rm < 700 N/mm² 700-1000 N/mm² < 35 HRC < 45 HRC
ap x ae 1.5D x 0.1D 1.5D x 0.1D 1.5D x 0.1D 1.5D x 0.05D
Vc (m/min) 100-140 70-110 50-90 50-70
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
66370 0.015 570 4780 0.013 370 3720 0.012 270 3180 0.012 230
84780 0.020 570 3580 0.017 370 2790 0.016 270 2390 0.016 230
10 3820 0.025 570 2870 0.021 370 2230 0.020 270 1910 0.020 230
12 3180 0.030 570 2390 0.026 370 1860 0.024 270 1590 0.024 230
14 2730 0.035 570 2050 0.030 370 1590 0.028 270 1360 0.028 230
16 2390 0.040 570 1790 0.034 370 1390 0.032 270 1190 0.032 230
20 1910 0.050 760 1430 0.043 490 1110 0.040 360 960 0.040 310
MEF - Stainless steel and super alloys - 45° chamfer
492
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
h stock standard f non-stock standard m stock exhaustion
MEF901
cylindrical shank, roughing
OSAWA
NORM
<45
HRC
PMKNSH
++ +
+ 1st choice , suitable
SIDE MILLING
D D Tol. C C Tol. d(h6) l l1 L z EDP No. Stock
40/-0.048 0.10 +/-0.020 6 11 57 3 MEF901040 h
50/-0.048 0.10 +/-0.020 6 13 57 4 MEF901050 h
60/-0.048 0.15 +/-0.020 6 16 57 4 MEF901060 h
80/-0.058 0.20 +/-0.020 8 16 63 4 MEF901080 h
10 0/-0.058 0.20 +/-0.020 10 22 72 4 MEF901100 h
12 0/-0.070 0.20 +/-0.020 12 26 83 4 MEF901120 h
14 0/-0.070 0.20 +/-0.020 14 26 83 5 MEF901140 h
16 0/-0.070 0.20 +/-0.020 16 32 92 5 MEF901160 h
20 0/-0.084 0.20 +/-0.020 20 38 104 6 MEF901200 h
MEF - Stainless steel and super alloys - 45° chamfer
493
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
CUTTING PARAMETERS
MEF901
SIDE MILLING
Material Group
ISO 513 P1 P2 P3 P4 M1 M2 P5 M3 M4 S1 S2 S4 M5 S3 S5
Hardness/Rm < 700 N/mm² 700-1000 N/mm² < 35 HRC < 45 HRC
ap x ae 1.5D x 0.3D 1.5D x 0.3D 1.5D x 0.2D D x 0.1D
Vc (m/min) 100-140 70-90 50-70 40-60
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
49550 0.018 520 6370 0.015 290 4780 0.014 210 3980 0.014 170
57640 0.022 670 5100 0.019 380 3820 0.018 270 3180 0.018 220
66370 0.028 710 4250 0.024 400 3180 0.022 280 2650 0.022 240
84780 0.035 670 3180 0.030 380 2390 0.028 270 1990 0.028 220
10 3820 0.040 610 2550 0.034 350 1910 0.032 240 1590 0.032 200
12 3180 0.045 570 2120 0.038 320 1590 0.036 230 1330 0.036 190
14 2730 0.050 680 1820 0.043 390 1360 0.040 270 1140 0.040 230
16 2390 0.057 680 1590 0.048 390 1190 0.046 270 1000 0.046 230
20 1910 0.073 840 1270 0.062 470 960 0.058 340 800 0.058 280
MEF - Stainless steel and super alloys - 45° chamfer
494
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
h stock standard f non-stock standard m stock exhaustion
MEF902
cylindrical shank, reduced neck, roughing
OSAWA
NORM
<45
HRC
PMKNSH
++ +
+ 1st choice , suitable
SIDE MILLING
D D Tol. C C Tol. d(h6) l l1 d1 L z EDP No. Stock
60/-0.048 0.15 +/-0.020 6 16 20 5.50 57 4 MEF902060 h
80/-0.058 0.20 +/-0.020 8 16 26 7.50 63 4 MEF902080 h
10 0/-0.058 0.20 +/-0.020 10 22 31 9.50 72 4 MEF902100 h
12 0/-0.070 0.20 +/-0.020 12 26 37 11.50 83 4 MEF902120 h
16 0/-0.070 0.20 +/-0.020 16 32 51 15.50 92 5 MEF902160 h
20 0/-0.084 0.20 +/-0.020 20 38 59 19.20 104 6 MEF902200 h
MEF - Stainless steel and super alloys - 45° chamfer
495
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
CUTTING PARAMETERS
MEF902
SIDE MILLING
Material Group
ISO 513 P1 P2 P3 P4 M1 M2 P5 M3 M4 S1 S2 S4 M5 S3 S5
Hardness/Rm < 700 N/mm² 700-1000 N/mm² < 35 HRC < 45 HRC
ap x ae 1.5D x 0.3D 1.5D x 0.3D 1.5D x 0.2D D x 0.1D
Vc (m/min) 100-120 60-80 40-60 40-50
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
65840 0.027 620 3720 0.023 340 2650 0.021 230 2390 0.021 200
84380 0.033 580 2790 0.028 320 1990 0.027 210 1790 0.027 190
10 3500 0.038 530 2230 0.032 290 1590 0.030 190 1430 0.030 170
12 2920 0.043 500 1860 0.036 270 1330 0.034 180 1190 0.034 160
14 2500 0.048 590 1590 0.040 320 1140 0.038 220 1020 0.038 190
16 2190 0.054 590 1390 0.046 320 1000 0.043 220 900 0.043 190
20 1750 0.069 730 1110 0.059 390 800 0.055 270 720 0.055 240
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
ALU
ALU
NON-FERROUS MATERIALS
Uncoated polished micrograin with cutting geometry
specifically designed for aluminium and non-ferrous materials.
The polished edge and the wide chip pockets, deliver low
cutting friction, high precision, excellent surface finishing and
smooth chip ejection.
Micrograna non rivestita e geometria di taglio sviluppata
specificamente per la lavorazione di materiali non-ferrosi.
Taglienti lappati e particolare profilo del vano truciolo per
bassi sforzi di taglio e un'eccellente finitura superficiale.
Disponibile anche la versione HF Alu con passo differenziato
(UP) con un particolare design che permette finiture a specchio
e lavorazioni DxD, anche nella versione a 4 taglienti.
Unbeschichtete Mikrokörnung und eigens für die
Bearbeitung von NE-Metallen entwickelte Schnittgeometrie.
Dank der geläppten Schneiden und der besonderen Form
der Nuten ist die aufzubringende Schnittkraft gering, bei
gleichzeitig ausgezeichnetem Oberflächenfinish. Auch in der
Version HF Alu mit ungleicher Teilung (UP) und besonderer
Form erhältlich, die auch in der Version mit 4 Schneiden ein
spiegelblankes Oberflächenfinish und DxD-Bearbeitungen
ermöglicht.
Micrograin non revêtu et poli avec une géométrie de
coupe développée spécialement pour l’usinage d’aluminium,
d'alliages et de matériaux non ferreux en général. La finition
polie des arêtes, associée au profil particulier de la goujure,
permet de générer peu d’efforts de coupe et d’obtenir
précision et qualité de finition ; une capacité exceptionnelle
d’évacuation des copeaux garantit une possibilité de débit
copeaux très élevée.
Micrograna no revestida y geometría de corte desarrollada
específicamente para la elaboración de materiales no ferrosos.
Filos de corte lapeados y perfil especial del compartimento de
virutas, para bajos esfuerzos de corte y un excelente acabado
de la superfície. También está disponible la versión HF Alu con
paso diferenciado (UP) con un diseño especial que permite
acabados a espejo y elaboraciones D x D, incluso en la versión
de 4 filos.
Микрозернистая структура твердого сплава без покрытия,
отполированная поверхность и специальная геометрия
предназначены для обработки алюминия и цветных металлов.
Отполированные кромки и широкие стружечные канавки
обеспечивают снижение трения, увеличение точности,
снижение шероховатости и улучшение вывода стружки.
ALU - Unequal pitch - Square
498
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
ALU
h stock standard f non-standard stock m stock exhaustion
D D Tol. C C Tol. d(h6) l l1 L z EDP No. Stock
30/-0.025 6 9 57 4 HFAL4030 h
40/-0.025 6 12 57 4 HFAL4040 h
50/-0.025 6 13 57 4 HFAL4050 h
60/-0.025 6 13 57 4 HFAL4060 h
80/-0.030 8 20 64 4 HFAL4080 h
10 0/-0.030 10 22 72 4 HFAL4100 h
12 0/-0.030 12 26 83 4 HFAL4120 h
14 0/-0.030 14 32 90 4 HFAL4140 h
16 0/-0.030 16 32 92 4 HFAL4160 h
20 0/-0.030 20 38 104 4 HFAL4200 h
HFAL4
cylindrical shank, 4 flutes
OSAWA
NORM
PMKNSH
+
+ 1st choice , suitable
SLOTTING
SIDE MILLING
HELICAL RAMPING VERTICAL DRILLING
ALU - Unequal pitch - Square
499
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
ALU
CUTTING PARAMETERS
HFAL4
SLOTTING
Material Group
ISO 513 N1 N2 N3 N4 N5
Material Alluminium ≤ 12% Si -
Copper Alloy
Alluminium > 12% Si -
Copper Alloy Brass and bronze Plastics
ap x ae D x D D x D D x D D x D
Vc (m/min) 300-500 200-400 150-350 600-1000
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
342460 0.030 5040 31850 0.025 3220 26540 0.021 2210 50000 0.033 6530
431850 0.040 5050 23890 0.034 3220 19900 0.028 2210 50000 0.044 8710
525480 0.050 5050 19110 0.042 3220 15920 0.035 2210 50000 0.054 10890
621230 0.059 4970 15920 0.050 3170 13270 0.041 2170 42460 0.064 10930
815920 0.077 4930 11940 0.066 3140 9950 0.054 2160 31850 0.085 10850
10 12740 0.095 4820 9550 0.080 3070 7960 0.066 2110 25480 0.104 10590
12 10620 0.108 4590 7960 0.092 2920 6630 0.076 2000 21230 0.119 10090
14 9100 0.126 4590 6820 0.107 2920 5690 0.088 2010 18200 0.139 10090
16 7960 0.144 4580 5970 0.122 2920 4980 0.101 2010 15920 0.158 10090
18 7080 0.158 4490 5310 0.135 2860 4420 0.111 1960 14150 0.174 9860
20 6370 0.176 4470 4780 0.149 2850 3980 0.123 1960 12740 0.193 9840
SIDE MILLING
Material Group
ISO 513 N1 N2 N3 N4 N5
Material Alluminium ≤ 12% Si -
Copper Alloy
Alluminium > 12% Si -
Copper Alloy Brass and bronze Plastics
ap x ae 1.5D x 0.5D 1.5D x 0.5D 1.5D x 0.5D 1.5D x 0.5D
Vc (m/min) 300-600 200-500 200-400 600-1000
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
347770 0.036 6810 37150 0.032 4770 31850 0.029 3630 50000 0.039 7840
435830 0.048 6810 27870 0.043 4770 23890 0.038 3630 50000 0.052 10450
528660 0.059 6810 22290 0.053 4770 19110 0.048 3630 50000 0.065 13070
623890 0.070 6710 18580 0.063 4700 15920 0.056 3580 42460 0.077 13120
817910 0.093 6650 13930 0.084 4660 11940 0.074 3550 31850 0.102 13020
10 14330 0.113 6500 11150 0.102 4550 9550 0.091 3470 25480 0.125 12710
12 11940 0.130 6190 9290 0.117 4330 7960 0.104 3300 21230 0.143 12110
14 10240 0.151 6190 7960 0.136 4330 6820 0.121 3300 18200 0.166 12110
16 8960 0.173 6190 6970 0.156 4340 5970 0.138 3300 15920 0.190 12100
18 7960 0.190 6050 6190 0.171 4240 5310 0.152 3230 14150 0.209 11830
20 7170 0.211 6040 5570 0.190 4220 4780 0.168 3220 12740 0.232 11810
HELICAL
Material Group
ISO 513 N1 N2 N3 N4 N5
Material Alluminium ≤ 12% Si -
Copper Alloy
Alluminium > 12% Si -
Copper Alloy Brass and bronze Plastics
_° x ae 8° x 0.5D 5° x 0.5D 5° x 0.5D 8° x 0.5D
Vc (m/min) 300-600 200-500 200-400 600-1000
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
347770 0.021 3925 37150 0.018 2730 31850 0.015 1929 50000 0.023 4517
435830 0.027 3925 27870 0.025 2730 23890 0.020 1929 50000 0.030 6023
528660 0.034 3925 22290 0.031 2730 19110 0.025 1929 50000 0.038 7529
623890 0.040 3865 18580 0.036 2690 15920 0.030 1899 42460 0.044 7556
817910 0.054 3835 13930 0.048 2670 11940 0.039 1884 31850 0.059 7499
10 14330 0.065 3745 11150 0.058 2610 9550 0.048 1840 25480 0.072 7325
12 11940 0.075 3565 9290 0.067 2485 7960 0.055 1753 21230 0.082 6975
14 10240 0.087 3570 7960 0.078 2485 6820 0.064 1752 18200 0.096 6976
16 8960 0.100 3570 6970 0.089 2485 5970 0.073 1753 15920 0.110 6974
18 7960 0.110 3485 6190 0.098 2425 5310 0.081 1715 14150 0.120 6818
20 7170 0.121 3480 5570 0.109 2420 4780 0.089 1710 12740 0.133 6801
PARAMETERS SUGGESTED WITH HIGH POWER MILLING CHUCK AND STABLE MACHINING CONDITION
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
ALU
ALU - Unequal pitch - Square
500
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
ALU
CUTTING PARAMETERS
HFAL4
RAMPING
Material Group
ISO 513 N1 N2 N3 N4 N5
Material Alluminium ≤ 12% Si -
Copper Alloy
Alluminium > 12% Si -
Copper Alloy Brass and bronze Plastics
_° x ae 15° x 0.5D 10° x 0.5D 7° x 0.5D 15° x 0.5D
Vc (m/min) 300-500 200-400 200-300 600-1000
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
342460 0.020 3355 31850 0.017 2185 26540 0.015 1545 50000 0.022 4344
431850 0.026 3355 23890 0.023 2185 19900 0.019 1544 50000 0.029 5792
525480 0.033 3355 19110 0.029 2185 15920 0.024 1544 50000 0.036 7240
621230 0.039 3305 15920 0.034 2150 13270 0.029 1521 42460 0.043 7266
815920 0.051 3275 11940 0.045 2135 9950 0.038 1509 31850 0.057 7211
10 12740 0.063 3200 9550 0.055 2085 7960 0.046 1474 25480 0.069 7043
12 10620 0.072 3050 7960 0.062 1985 6630 0.053 1403 21230 0.079 6707
14 9100 0.084 3050 6820 0.073 1985 5690 0.062 1405 18200 0.092 6708
16 7960 0.096 3050 5970 0.083 1985 4980 0.071 1405 15920 0.105 6706
18 7080 0.105 2980 5310 0.092 1945 4420 0.078 1372 14150 0.116 6556
20 6370 0.117 2975 4780 0.101 1940 3980 0.086 1369 12740 0.128 6540
VERTICAL
Material Group
ISO 513 N1 N2 N3 N4 N5
Material Alluminium ≤ 12% Si -
Copper Alloy
Alluminium > 12% Si -
Copper Alloy Brass and bronze Plastics
ap x ae D x 0.4D D x 0.4D D x 0.4D D x 0.4D
Vc (m/min) 300-500 200-400 150-350 600-1000
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
342460 0.030 5040 31850 0.027 3410 26540 0.024 2520 50000 0.033 6530
431850 0.040 5050 23890 0.036 3410 19900 0.032 2520 50000 0.044 8710
525480 0.050 5050 19110 0.045 3410 15920 0.040 2520 50000 0.054 10890
621230 0.059 4970 15920 0.053 3350 13270 0.047 2480 42460 0.064 10930
815920 0.077 4930 11940 0.070 3330 9950 0.062 2460 31850 0.085 10850
10 12740 0.095 4820 9550 0.085 3250 7960 0.076 2410 25480 0.104 10590
12 10620 0.108 4590 7960 0.097 3090 6630 0.086 2290 21230 0.119 10090
14 9100 0.126 4590 6820 0.113 3090 5690 0.101 2290 18200 0.139 10090
16 7960 0.144 4580 5970 0.130 3090 4980 0.115 2290 15920 0.158 10090
18 7080 0.158 4490 5310 0.143 3030 4420 0.127 2240 14150 0.174 9860
20 6370 0.176 4470 4780 0.158 3020 3980 0.140 2240 12740 0.193 9840
DRILLING
Material Group
ISO 513 N1 N2 N3 N4 N5
Material Alluminium ≤ 12% Si -
Copper Alloy
Alluminium > 12% Si -
Copper Alloy Brass and bronze Plastics
ap x ae D x D D x D 0.5D x D 0.5D x D
Vc (m/min) 270-370 190-290 150-250 590-690
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
333970 0.015 2020 25480 0.013 1360 21230 0.012 1010 50000 0.016 3270
425480 0.020 2020 19110 0.018 1360 15920 0.016 1010 50000 0.022 4360
520380 0.025 2020 15290 0.022 1360 12740 0.020 1010 40760 0.027 4440
616990 0.029 1990 12740 0.026 1340 10620 0.023 990 33970 0.032 4370
812740 0.039 1970 9550 0.035 1330 7960 0.031 990 25480 0.043 4340
10 10190 0.047 1930 7640 0.043 1300 6370 0.038 960 20380 0.052 4240
12 8490 0.054 1830 6370 0.049 1240 5310 0.043 920 16990 0.059 4040
14 7280 0.063 1830 5460 0.057 1240 4550 0.050 920 14560 0.069 4040
16 6370 0.072 1830 4780 0.065 1240 3980 0.058 920 12740 0.079 4040
18 5660 0.079 1790 4250 0.071 1210 3540 0.063 900 11320 0.087 3940
20 5100 0.088 1790 3820 0.079 1210 3180 0.070 890 10190 0.097 3930
PARAMETERS SUGGESTED WITH HIGH POWER MILLING CHUCK AND STABLE MACHINING CONDITION
ALU - Unequal pitch - Corner radius
501
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
ALU
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
ALU
h stock standard f non-standard stock m stock exhaustion
D D Tol. CR CR Tol. d(h6) l l1 L z EDP No. Stock
20/-0.030 0.10 +/-0.010 6 6.5 50 3 HFAL301020 h
30/-0.030 0.10 +/-0.010 6 9 50 3 HFAL301030 h
40/-0.030 0.10 +/-0.010 6 12 50 3 HFAL301040 h
50/-0.030 0.10 +/-0.010 6 15 50 3 HFAL301050 h
60/-0.030 0.10 +/-0.010 6 20 60 3 HFAL301060 h
80/-0.030 0.10 +/-0.010 8 20 64 3 HFAL301080 h
10 0/-0.030 0.10 +/-0.010 10 22 75 3 HFAL301100 h
12 0/-0.030 0.10 +/-0.010 12 25 75 3 HFAL301120 h
14 0/-0.030 0.10 +/-0.010 14 32 90 3 HFAL301140 h
16 0/-0.030 0.10 +/-0.010 16 32 90 3 HFAL301160 h
20 0/-0.030 0.10 +/-0.010 20 38 100 3 HFAL301200 h
HFAL3
cylindrical shank, 3 flutes, corner radius
OSAWA
NORM POLISHED
PMKNSH
+
+ 1st choice , suitable
SLOTTING
SIDE MILLING
HELICAL RAMPING VERTICAL DRILLING
CR
CR
ALU - Unequal pitch - Corner radius
502
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
ALU
CUTTING PARAMETERS
HFAL3
SLOTTING
Material Group
ISO 513 N1 N2 N3 N4 N5
Material Alluminium ≤ 12% Si -
Copper Alloy
Alluminium > 12% Si -
Copper Alloy Brass and bronze Plastics
ap x ae D x D D x D D x D D x D
Vc (m/min) 300-500 200-400 150-350 600-900
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
250000 0.022 3300 47770 0.019 2680 39810 0.015 1840 50000 0.024 3630
342460 0.033 4200 31850 0.028 2680 26540 0.023 1840 50000 0.036 5450
431850 0.044 4200 23890 0.037 2680 19900 0.031 1840 50000 0.048 7260
525480 0.055 4200 19110 0.047 2680 15920 0.039 1840 47770 0.061 8670
621230 0.065 4140 15920 0.055 2640 13270 0.046 1810 39810 0.072 8540
815920 0.086 4110 11940 0.073 2620 9950 0.060 1800 29860 0.095 8470
10 12740 0.105 4010 9550 0.089 2560 7960 0.074 1760 23890 0.116 8280
12 10620 0.120 3820 7960 0.102 2440 6630 0.084 1670 19900 0.132 7880
14 9100 0.140 3820 6820 0.119 2430 5690 0.098 1670 17060 0.154 7880
16 7960 0.160 3820 5970 0.136 2440 4980 0.112 1670 14930 0.176 7880
18 7080 0.176 3740 5310 0.150 2380 4420 0.123 1630 13270 0.194 7710
20 6370 0.195 3730 4780 0.166 2380 3980 0.137 1630 11940 0.215 7680
SIDE MILLING
Material Group
ISO 513 N1 N2 N3 N4 N5
Material Alluminium ≤ 12% Si -
Copper Alloy
Alluminium > 12% Si -
Copper Alloy Brass and bronze Plastics
ap x ae 1.5D x 0.5D 1.5D x 0.5D 1.5D x 0.5D 1.5D x 0.5D
Vc (m/min) 300-600 200-500 200-400 600-1000
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
250000 0.026 3960 55730 0.024 3970 47770 0.021 3030 50000 0.029 4360
347770 0.040 5680 37150 0.036 3970 31850 0.032 3030 50000 0.044 6530
435830 0.053 5680 27870 0.048 3970 23890 0.042 3030 50000 0.058 8710
528660 0.066 5670 22290 0.059 3970 19110 0.053 3030 50000 0.073 10890
623890 0.078 5590 18580 0.070 3910 15920 0.062 2980 42460 0.086 10930
817910 0.103 5540 13930 0.093 3880 11940 0.083 2960 31850 0.114 10850
10 14330 0.126 5420 11150 0.113 3790 9550 0.101 2890 25480 0.139 10590
12 11940 0.144 5160 9290 0.130 3610 7960 0.115 2750 21230 0.158 10090
14 10240 0.168 5160 7960 0.151 3610 6820 0.134 2750 18200 0.185 10090
16 8960 0.192 5160 6970 0.173 3610 5970 0.154 2750 15920 0.211 10090
18 7960 0.211 5040 6190 0.190 3530 5310 0.169 2690 14150 0.232 9860
20 7170 0.234 5030 5570 0.211 3520 4780 0.187 2680 12740 0.257 9840
HELICAL
Material Group
ISO 513 N1 N2 N3 N4 N5
Material Alluminium ≤ 12% Si -
Copper Alloy
Alluminium > 12% Si -
Copper Alloy Brass and bronze Plastics
_° x ae 8° x 0.5D 5° x 0.5D 5° x 0.5D 8° x 0.5D
Vc (m/min) 300-500 200-400 150-350 600-900
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
250000 0.015 2280 47770 0.014 1950 39810 0.011 1339 50000 0.017 2510
342460 0.023 2905 31850 0.020 1950 26540 0.017 1339 50000 0.025 3764
431850 0.030 2905 23890 0.027 1950 19900 0.022 1339 50000 0.033 5019
525480 0.038 2905 19110 0.034 1950 15920 0.028 1339 47770 0.042 5994
621230 0.045 2860 15920 0.040 1920 13270 0.033 1319 39810 0.049 5904
815920 0.059 2840 11940 0.053 1905 9950 0.044 1308 29860 0.065 5859
10 12740 0.073 2775 9550 0.065 1860 7960 0.054 1278 23890 0.080 5723
12 10620 0.083 2645 7960 0.074 1775 6630 0.061 1217 19900 0.091 5448
14 9100 0.097 2640 6820 0.087 1775 5690 0.071 1218 17060 0.106 5449
16 7960 0.111 2640 5970 0.099 1775 4980 0.082 1218 14930 0.122 5450
18 7080 0.122 2585 5310 0.109 1735 4420 0.090 1189 13270 0.134 5328
20 6370 0.135 2575 4780 0.121 1730 3980 0.099 1187 11940 0.148 5312
PARAMETERS SUGGESTED WITH HIGH POWER MILLING CHUCK AND STABLE MACHINING CONDITION
ALU - Unequal pitch - Corner radius
503
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
ALU
CUTTING PARAMETERS
HFAL3
RAMPING
Material Group
ISO 513 N1 N2 N3 N4 N5
Material Alluminium ≤ 12% Si -
Copper Alloy
Alluminium > 12% Si -
Copper Alloy Brass and bronze Plastics
_° x ae 15° x 0.5D 10° x 0.5D 7° x 0.5D 15° x 0.5D
Vc (m/min) 300-500 200-400 150-350 600-900
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
250000 0.015 2194 47770 0.013 1822 39810 0.011 1287 50000 0.016 2413
342460 0.022 2794 31850 0.019 1822 26540 0.016 1287 50000 0.024 3620
431850 0.029 2795 23890 0.025 1822 19900 0.022 1287 50000 0.032 4826
525480 0.037 2795 19110 0.032 1822 15920 0.027 1287 47770 0.040 5764
621230 0.043 2752 15920 0.038 1794 13270 0.032 1268 39810 0.048 5677
815920 0.057 2731 11940 0.050 1780 9950 0.042 1258 29860 0.063 5634
10 12740 0.070 2668 9550 0.061 1738 7960 0.051 1228 23890 0.077 5503
12 10620 0.080 2542 7960 0.069 1656 6630 0.059 1169 19900 0.088 5239
14 9100 0.093 2541 6820 0.081 1655 5690 0.069 1171 17060 0.102 5240
16 7960 0.106 2540 5970 0.092 1656 4980 0.078 1171 14930 0.117 5241
18 7080 0.117 2485 5310 0.102 1620 4420 0.086 1143 13270 0.129 5124
20 6370 0.130 2477 4780 0.113 1616 3980 0.096 1141 11940 0.143 5108
VERTICAL
Material Group
ISO 513 N1 N2 N3 N4 N5
Material Alluminium ≤ 12% Si -
Copper Alloy
Alluminium > 12% Si -
Copper Alloy Brass and bronze Plastics
ap x ae D x 0.4D D x 0.4D D x 0.4D D x 0.4D
Vc (m/min) 300-500 200-400 150-350 600-900
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
250000 0.022 3300 47770 0.020 2840 39810 0.018 2100 50000 0.024 3630
342460 0.033 4200 31850 0.030 2840 26540 0.026 2100 50000 0.036 5450
431850 0.044 4200 23890 0.040 2840 19900 0.035 2100 50000 0.048 7260
525480 0.055 4200 19110 0.050 2840 15920 0.044 2100 47770 0.061 8670
621230 0.065 4140 15920 0.059 2790 13270 0.052 2070 39810 0.072 8540
815920 0.086 4110 11940 0.077 2770 9950 0.069 2050 29860 0.095 8470
10 12740 0.105 4010 9550 0.095 2710 7960 0.084 2010 23890 0.116 8280
12 10620 0.120 3820 7960 0.108 2580 6630 0.096 1910 19900 0.132 7880
14 9100 0.140 3820 6820 0.126 2580 5690 0.112 1910 17060 0.154 7880
16 7960 0.160 3820 5970 0.144 2580 4980 0.128 1910 14930 0.176 7880
18 7080 0.176 3740 5310 0.158 2520 4420 0.141 1870 13270 0.194 7710
20 6370 0.195 3730 4780 0.176 2520 3980 0.156 1860 11940 0.215 7680
DRILLING
Material Group
ISO 513 N1 N2 N3 N4 N5
Material Alluminium ≤ 12% Si -
Copper Alloy
Alluminium > 12% Si -
Copper Alloy Brass and bronze Plastics
ap x ae D x D D x D 0.5D x D 0.5D x D
Vc (m/min) 270-370 190-290 150-250 500-700
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
250000 0.011 1650 38220 0.010 1140 31850 0.009 840 50000 0.012 1820
333970 0.017 1680 25480 0.015 1140 21230 0.013 840 50000 0.018 2720
425480 0.022 1680 19110 0.020 1140 15920 0.018 840 47770 0.024 3470
520380 0.028 1680 15290 0.025 1140 12740 0.022 840 38220 0.030 3470
616990 0.033 1660 12740 0.029 1120 10620 0.026 830 31850 0.036 3420
812740 0.043 1640 9550 0.039 1110 7960 0.034 820 23890 0.047 3390
10 10190 0.053 1600 7640 0.047 1080 6370 0.042 800 19110 0.058 3310
12 8490 0.060 1530 6370 0.054 1030 5310 0.048 760 15920 0.066 3150
14 7280 0.070 1530 5460 0.063 1030 4550 0.056 760 13650 0.077 3150
16 6370 0.080 1530 4780 0.072 1030 3980 0.064 760 11940 0.088 3150
18 5660 0.088 1490 4250 0.079 1010 3540 0.070 750 10620 0.097 3080
20 5100 0.098 1490 3820 0.088 1010 3180 0.078 740 9550 0.107 3070
PARAMETERS SUGGESTED WITH HIGH POWER MILLING CHUCK AND STABLE MACHINING CONDITION
ALU - Unequal pitch - Corner radius
504
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
ALU
h stock standard f non-standard stock m stock exhaustion
D D Tol. CR CR Tol. d(h6) l l1 d1 L z EDP No. Stock
30/-0.030 0.2 +/-0.010 6 5 18 2.80 60 3 HFA5302030 h
30/-0.030 0.5 +/-0.010 6 5 18 2.80 60 3 HFA5305030 h
40/-0.030 0.5 +/-0.010 6 6 22 3.80 60 3 HFA5305040 h
40/-0.030 1.0 +/-0.010 6 6 22 3.80 60 3 HFA5310040 h
50/-0.030 0.5 +/-0.010 6 8 24 4.80 60 3 HFA5305050 h
50/-0.030 1.0 +/-0.010 6 8 24 4.80 60 3 HFA5310050 h
60/-0.030 0.5 +/-0.010 6 9 29 5.80 65 3 HFA5305060 h
60/-0.030 1.0 +/-0.010 6 9 29 5.80 65 3 HFA5310060 h
60/-0.030 2.0 +/-0.010 6 9 29 5.80 65 3 HFA5320060 h
80/-0.030 0.5 +/-0.010 8 12 39 7.80 75 3 HFA5305080 h
80/-0.030 1.0 +/-0.010 8 12 39 7.80 75 3 HFA5310080 h
80/-0.030 2.0 +/-0.010 8 12 39 7.80 75 3 HFA5320080 h
80/-0.030 3.0 +/-0.010 8 12 39 7.80 75 3 HFA5330080 h
10 0/-0.030 0.5 +/-0.010 10 15 52 9.80 100 3 HFA5305100 h
10 0/-0.030 1.0 +/-0.010 10 15 52 9.80 100 3 HFA5310100 h
10 0/-0.030 2.0 +/-0.010 10 15 52 9.80 100 3 HFA5320100 h
10 0/-0.030 3.0 +/-0.010 10 15 52 9.80 100 3 HFA5330100 h
10 0/-0.030 4.0 +/-0.010 10 15 52 9.80 100 3 HFA5340100 h
12 0/-0.030 0.5 +/-0.010 12 18 62 11.80 120 3 HFA5305120 h
12 0/-0.030 1.0 +/-0.010 12 18 62 11.80 120 3 HFA5310120 h
12 0/-0.030 2.0 +/-0.010 12 18 62 11.80 120 3 HFA5320120 h
12 0/-0.030 3.0 +/-0.010 12 18 62 11.80 120 3 HFA5330120 h
12 0/-0.030 4.0 +/-0.010 12 18 62 11.80 120 3 HFA5340120 h
16 0/-0.030 0.5 +/-0.010 16 24 82 15.70 130 3 HFA5305160 h
16 0/-0.030 1.0 +/-0.010 16 24 82 15.70 130 3 HFA5310160 h
16 0/-0.030 2.0 +/-0.010 16 24 82 15.70 130 3 HFA5320160 h
16 0/-0.030 3.0 +/-0.010 16 24 82 15.70 130 3 HFA5330160 h
16 0/-0.030 4.0 +/-0.010 16 24 82 15.70 130 3 HFA5340160 h
20 0/-0.030 0.5 +/-0.010 20 30 100 19.70 150 3 HFA5305200 h
20 0/-0.030 1.0 +/-0.010 20 30 100 19.70 150 3 HFA5310200 h
20 0/-0.030 2.0 +/-0.010 20 30 100 19.70 150 3 HFA5320200 h
20 0/-0.030 3.0 +/-0.010 20 30 100 19.70 150 3 HFA5330200 h
20 0/-0.030 4.0 +/-0.010 20 30 100 19.70 150 3 HFA5340200 h
HFA53
cylincrical shank, reduced neck, 3 flutes, long reach,
corner radius
OSAWA
NORM
PMKNSH
+
+ 1st choice , suitable
SLOTTING
SIDE MILLING
HELICAL RAMPING VERTICAL DRILLING
CR
CR
ALU - Unequal pitch - Corner radius
505
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
ALU
CUTTING PARAMETERS
HFA53
SLOTTING
Material Group
ISO 513 N1 N2 N3 N4 N5
Material Alluminium ≤ 12% Si -
Copper Alloy
Alluminium > 12% Si -
Copper Alloy Brass and bronze Plastics
ap x ae 0.5D x D 0.5D x D 0.5D x D 0.5D x D
Vc (m/min) 200-500 150-350 150-250 500-900
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
337150 0.026 2940 26540 0.022 1790 21230 0.018 1180 50000 0.029 4360
427870 0.035 2940 19900 0.030 1790 15920 0.025 1180 50000 0.039 5810
522290 0.044 2940 15920 0.037 1790 12740 0.031 1180 44590 0.048 6470
618580 0.052 2900 13270 0.044 1760 10620 0.036 1160 37150 0.057 6370
813930 0.069 2880 9950 0.058 1750 7960 0.048 1150 27870 0.076 6330
10 11150 0.084 2810 7960 0.071 1710 6370 0.059 1120 22290 0.092 6180
12 9290 0.096 2680 6630 0.082 1620 5310 0.067 1070 18580 0.106 5890
14 7960 0.112 2670 5690 0.095 1630 4550 0.078 1070 15920 0.123 5880
16 6970 0.128 2680 4980 0.109 1630 3980 0.090 1070 13930 0.141 5880
18 6190 0.141 2610 4420 0.120 1590 3540 0.099 1050 12380 0.155 5750
20 5570 0.156 2610 3980 0.133 1580 3180 0.109 1040 11150 0.172 5740
SIDE MILLING
Material Group
ISO 513 N1 N2 N3 N4 N5
Material Alluminium ≤ 12% Si -
Copper Alloy
Alluminium > 12% Si -
Copper Alloy Brass and bronze Plastics
ap x ae 1.5D x 0.5D 1.5D x 0.5D 1.5D x 0.5D 1.5D x 0.5D
Vc (m/min) 300-500 200-400 150-350 600-900
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
342460 0.032 4040 31850 0.029 2720 26540 0.025 2020 50000 0.035 5230
431850 0.042 4040 23890 0.038 2720 19900 0.034 2020 50000 0.046 6970
525480 0.053 4040 19110 0.048 2720 15920 0.042 2020 47770 0.058 8320
621230 0.062 3970 15920 0.056 2680 13270 0.050 1990 39810 0.069 8200
815920 0.083 3940 11940 0.074 2660 9950 0.066 1970 29860 0.091 8140
10 12740 0.101 3850 9550 0.091 2600 7960 0.081 1930 23890 0.111 7950
12 10620 0.115 3670 7960 0.104 2480 6630 0.092 1830 19900 0.127 7570
14 9100 0.134 3670 6820 0.121 2470 5690 0.108 1840 17060 0.148 7570
16 7960 0.154 3670 5970 0.138 2480 4980 0.123 1840 14930 0.169 7570
18 7080 0.169 3590 5310 0.152 2420 4420 0.135 1790 13270 0.186 7400
20 6370 0.187 3580 4780 0.168 2420 3980 0.150 1790 11940 0.206 7380
HELICAL
Material Group
ISO 513 N1 N2 N3 N4 N5
Material Alluminium ≤ 12% Si -
Copper Alloy
Alluminium > 12% Si -
Copper Alloy Brass and bronze Plastics
_° x ae 8° x 0.5D 5° x 0.5D 5° x 0.5D 8° x 0.5D
Vc (m/min) 200-500 150-350 200-400 500-900
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
337150 0.018 2035 26540 0.016 1300 31850 0.013 1285 50000 0.020 3010
427870 0.024 2035 19900 0.022 1300 23890 0.018 1285 50000 0.027 4015
522290 0.030 2035 15920 0.027 1300 19110 0.022 1285 44590 0.033 4475
618580 0.036 2005 13270 0.032 1280 15920 0.027 1265 37150 0.040 4405
813930 0.048 1990 9950 0.043 1270 11940 0.035 1255 27870 0.052 4375
10 11150 0.058 1945 7960 0.052 1240 9550 0.043 1225 22290 0.064 4270
12 9290 0.066 1850 6630 0.059 1180 7960 0.049 1170 18580 0.073 4070
14 7960 0.077 1850 5690 0.069 1185 6820 0.057 1170 15920 0.085 4070
16 6970 0.088 1850 4980 0.079 1185 5970 0.065 1170 13930 0.097 4070
18 6190 0.097 1810 4420 0.087 1155 5310 0.072 1145 12380 0.107 3975
20 5570 0.108 1800 3980 0.097 1155 4780 0.080 1140 11150 0.119 3970
PARAMETERS SUGGESTED WITH HIGH POWER MILLING CHUCK AND STABLE MACHINING CONDITION
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
ALU
ALU - Unequal pitch - Corner radius
506
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
ALU
CUTTING PARAMETERS
HFA53
RAMPING
Material Group
ISO 513 N1 N2 N3 N4 N5
Material Alluminium ≤ 12% Si -
Copper Alloy
Alluminium > 12% Si -
Copper Alloy Brass and bronze Plastics
_° x ae 15° x D 10° x D 7° x D 15° x D
Vc (m/min) 200-500 150-350 200-400 500-900
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
337150 0.018 1955 26540 0.014 1095 21230 0.013 825 50000 0.019 2895
427870 0.023 1955 19900 0.018 1095 15920 0.017 825 50000 0.026 3860
522290 0.029 1955 15920 0.023 1095 12740 0.022 825 44590 0.032 4305
618580 0.035 1925 13270 0.027 1075 10620 0.025 810 37150 0.038 4240
813930 0.046 1910 9950 0.036 1070 7960 0.034 805 27870 0.050 4205
10 11150 0.056 1870 7960 0.044 1045 6370 0.041 785 22290 0.061 4110
12 9290 0.064 1780 6630 0.050 995 5310 0.047 750 18580 0.070 3915
14 7960 0.074 1780 5690 0.058 995 4550 0.055 750 15920 0.082 3910
16 6970 0.085 1780 4980 0.067 995 3980 0.063 750 13930 0.094 3910
18 6190 0.094 1740 4420 0.073 970 3540 0.069 735 12380 0.103 3825
20 5570 0.104 1735 3980 0.081 970 3180 0.076 730 11150 0.114 3815
VERTICAL
Material Group
ISO 513 N1 N2 N3 N4 N5
Material Alluminium ≤ 12% Si -
Copper Alloy
Alluminium > 12% Si -
Copper Alloy Brass and bronze Plastics
ap x ae D x 0.4D D x 0.4D D x 0.4D D x 0.4D
Vc (m/min) 200-500 150-350 150-250 500-900
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
337150 0.026 2940 26540 0.024 1890 21230 0.021 1350 50000 0.029 4360
427870 0.035 2940 19900 0.032 1890 15920 0.028 1340 50000 0.039 5810
522290 0.044 2940 15920 0.040 1890 12740 0.035 1350 44590 0.048 6470
618580 0.052 2900 13270 0.047 1860 10620 0.042 1330 37150 0.057 6370
813930 0.069 2880 9950 0.062 1850 7960 0.055 1310 27870 0.076 6330
10 11150 0.084 2810 7960 0.076 1810 6370 0.067 1280 22290 0.092 6180
12 9290 0.096 2680 6630 0.086 1720 5310 0.077 1220 18580 0.106 5890
14 7960 0.112 2670 5690 0.101 1720 4550 0.090 1220 15920 0.123 5880
16 6970 0.128 2680 4980 0.115 1720 3980 0.102 1220 13930 0.141 5880
18 6190 0.141 2610 4420 0.127 1680 3540 0.113 1200 12380 0.155 5750
20 5570 0.156 2610 3980 0.140 1680 3180 0.125 1190 11150 0.172 5740
DRILLING
Material Group
ISO 513 N1 N2 N3 N4 N5
Material Alluminium ≤ 12% Si -
Copper Alloy
Alluminium > 12% Si -
Copper Alloy Brass and bronze Plastics
ap x ae 0.5D x D 0.5D x D 0.5D x D 0.5D x D
Vc (m/min) 230-330 150-250 110-210 510-610
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
329720 0.013 1180 21230 0.012 760 16990 0.011 540 50000 0.015 2180
422290 0.018 1180 15920 0.016 760 12740 0.014 540 44590 0.019 2590
517830 0.022 1180 12740 0.020 760 10190 0.018 540 35670 0.024 2590
614860 0.026 1160 10620 0.023 750 8490 0.021 530 29720 0.029 2550
811150 0.034 1150 7960 0.031 740 6370 0.028 530 22290 0.038 2530
10 8920 0.042 1120 6370 0.038 720 5100 0.034 510 17830 0.046 2470
12 7430 0.048 1070 5310 0.043 690 4250 0.038 490 14860 0.053 2350
14 6370 0.056 1070 4550 0.050 690 3640 0.045 490 12740 0.062 2350
16 5570 0.064 1070 3980 0.058 690 3180 0.051 490 11150 0.070 2350
18 4950 0.070 1050 3540 0.063 670 2830 0.056 480 9910 0.077 2300
20 4460 0.078 1040 3180 0.070 670 2550 0.062 480 8920 0.086 2300
PARAMETERS SUGGESTED WITH HIGH POWER MILLING CHUCK AND STABLE MACHINING CONDITION
ALU - Square
507
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
ALU
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
ALU
h stock standard f non-standard stock m stock exhaustion
D D Tol. C C Tol. d(h6) l l1 L z EDP No. Stock
20/-0.020 2 10 40 1 MDCSA1020 h
30/-0.020 3 12 40 1 MDCSA1030 h
40/-0.020 4 15 50 1 MDCSA1040 h
50/-0.020 5 16 50 1 MDCSA1050 h
60/-0.020 6 20 60 1 MDCSA1060 h
80/-0.020 8 22 63 1 MDCSA1080 h
10 0/-0.020 10 25 72 1 MDCSA1100 h
12 0/-0.020 12 30 83 1 MDCSA1120 h
MDCSA1
cylindrical shank, 1 flute, polished
OSAWA
NORM POLISHED
PMKNSH
+
+ 1st choice , suitable
SLOTTING
SIDE MILLING
DRILLING
ALU - Square
508
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
ALU
CUTTING PARAMETERS
MDCSA1
SLOTTING
Material Group
ISO 513 N1 N2 N3 N4 N5
Material Alluminium ≤ 12% Si -
Copper Alloy
Alluminium > 12% Si -
Copper Alloy Brass and bronze Plastics
ap x ae 0.5D x D 0.5D x D 0.5D x D 0.5D x D
Vc (m/min) 300-500 200-400 150-350 400-600
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
250000 0.023 1130 47770 0.019 910 39810 0.016 630 50000 0.023 1130
342460 0.030 1270 31850 0.026 810 31850 0.021 670 50000 0.030 1500
435830 0.039 1400 27870 0.033 920 23890 0.027 650 39810 0.039 1550
528660 0.049 1400 22290 0.041 920 19110 0.034 650 38220 0.049 1860
623890 0.058 1380 18580 0.049 910 15920 0.040 640 31850 0.058 1840
817910 0.079 1410 13930 0.067 930 11940 0.055 660 23890 0.079 1880
10 14330 0.098 1400 11150 0.083 920 9550 0.068 650 19110 0.098 1860
12 11940 0.116 1390 9290 0.099 920 7960 0.081 650 15920 0.116 1850
< D3 ap x ae D x 0.25D
SIDE MILLING
Material Group
ISO 513 N1 N2 N3 N4 N5
Material Alluminium ≤ 12% Si -
Copper Alloy
Alluminium > 12% Si -
Copper Alloy Brass and bronze Plastics
ap x ae D x 0.5D D x 0.5D D x 0.5D D x 0.5D
Vc (m/min) 300-600 200-500 200-400 400-800
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
250000 0.030 1500 50000 0.026 1280 47770 0.021 1000 50000 0.030 1500
347770 0.040 1910 37150 0.034 1260 31850 0.028 890 50000 0.040 2000
435830 0.052 1860 27870 0.044 1230 23890 0.036 870 47770 0.052 2480
528660 0.065 1860 22290 0.055 1230 19110 0.046 870 38220 0.065 2480
623890 0.077 1840 18580 0.065 1220 15920 0.054 860 31850 0.077 2450
817910 0.105 1880 13930 0.089 1240 11940 0.074 880 23890 0.105 2510
10 14330 0.130 1860 11150 0.111 1230 9550 0.091 870 19110 0.130 2480
12 11940 0.155 1850 9290 0.132 1220 7960 0.109 860 15920 0.155 2470
< D3 ap x ae D x 0.25D
DRILLING
Material Group
ISO 513 N1 N2 N3 N4 N5
Material Alluminium ≤ 12% Si -
Copper Alloy
Alluminium > 12% Si -
Copper Alloy Brass and bronze Plastics
ap x ae D x D D x D D x D 0.5D x D
Vc (m/min) 200-400 150-350 100-300 300-500
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
247770 0.011 540 39810 0.010 380 31850 0.008 250 50000 0.011 560
331850 0.015 480 26540 0.013 340 21230 0.011 220 42460 0.015 640
423890 0.020 470 19900 0.017 330 15920 0.014 220 31850 0.020 620
519110 0.024 470 15920 0.021 330 12740 0.017 220 25480 0.024 620
615920 0.029 460 13270 0.025 330 10620 0.020 210 21230 0.029 610
811940 0.039 470 9950 0.033 330 7960 0.028 220 15920 0.039 630
10 9550 0.049 470 7960 0.041 330 6370 0.034 220 12740 0.049 620
12 7960 0.058 460 6630 0.049 330 5310 0.041 220 10620 0.058 620
< D3 ap x ae 0.5D x D
ALU - Square
509
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
ALU
h stock standard f non-standard stock m stock exhaustion
D D Tol. C C Tol. d(h6) l l1 L z EDP No. Stock
10/-0.020 4 3 40 2 MDCSA2010 h
1.5 0/-0.020 4 4.5 40 2 MDCSA2015 h
20/-0.020 4 6.5 40 2 MDCSA2020 h
2.5 0/-0.020 4 6.5 40 2 MDCSA2025 h
30/-0.030 6 8 57 2 MDCSA2030 h
40/-0.030 6 11 57 2 MDCSA2040 h
50/-0.030 6 13 57 2 MDCSA2050 h
60/-0.030 6 13 57 2 MDCSA2060 h
80/-0.030 8 19 63 2 MDCSA2080 h
10 0/-0.030 10 22 72 2 MDCSA2100 h
12 0/-0.030 12 26 83 2 MDCSA2120 h
14 0/-0.030 14 26 83 2 MDCSA2140 h
16 0/-0.030 16 32 92 2 MDCSA2160 h
18 0/-0.030 18 32 92 2 MDCSA2180 h
20 0/-0.030 20 38 104 2 MDCSA2200 h
MDCSA2
cylindrical shank, 2 flutes, polished
OSAWA
NORM POLISHED
PMKNSH
+
+ 1st choice , suitable
SLOTTING
SIDE MILLING
DRILLING
ALU - Square
510
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
ALU
CUTTING PARAMETERS
MDCSA2
SLOTTING
Material Group
ISO 513 N1 N2 N3 N4 N5
Material Alluminium ≤ 12% Si -
Copper Alloy
Alluminium > 12% Si -
Copper Alloy Brass and bronze Plastics
ap x ae 0.5D x D 0.5D x D 0.5D x D 0.5D x D
Vc (m/min) 200-600 150-350 150-250 500-900
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
150000 0.011 1120 50000 0.010 950 50000 0.008 780 50000 0.011 1120
1.5 50000 0.017 1680 50000 0.014 1430 42460 0.012 1000 50000 0.017 1680
250000 0.022 2240 39810 0.019 1520 31850 0.016 1000 50000 0.022 2240
337150 0.028 2100 26540 0.024 1270 21230 0.020 840 50000 0.028 2820
427870 0.038 2090 19900 0.032 1270 15920 0.026 840 50000 0.038 3750
522290 0.047 2100 15920 0.040 1270 12740 0.033 840 44590 0.047 4200
618580 0.056 2090 13270 0.048 1270 10620 0.039 840 37150 0.056 4190
813930 0.075 2080 9950 0.064 1270 7960 0.052 830 27870 0.075 4170
10 11150 0.094 2090 7960 0.080 1270 6370 0.066 840 22290 0.094 4170
12 9290 0.112 2080 6630 0.095 1260 5310 0.078 830 18580 0.112 4160
14 7960 0.130 2080 5690 0.111 1260 4550 0.091 830 15920 0.130 4150
16 6970 0.148 2060 4980 0.126 1250 3980 0.103 820 13930 0.148 4120
18 6190 0.166 2060 4420 0.141 1250 3540 0.116 820 12380 0.166 4120
20 5570 0.185 2060 3980 0.157 1250 3180 0.129 820 11150 0.185 4120
< D3 ap x ae 0.25D x D
SIDE MILLING
Material Group
ISO 513 N1 N2 N3 N4 N5
Material Alluminium ≤ 12% Si -
Copper Alloy
Alluminium > 12% Si -
Copper Alloy Brass and bronze Plastics
ap x ae D x 0.5D D x 0.5D D x 0.5D D x 0.5D
Vc (m/min) 300-500 200-400 150-350 600-1000
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
150000 0.013 1340 50000 0.011 1140 50000 0.009 940 50000 0.013 1340
1.5 50000 0.020 2020 50000 0.017 1710 50000 0.014 1410 50000 0.020 2020
250000 0.027 2690 50000 0.023 2280 39810 0.019 1500 50000 0.027 2690
342460 0.034 2880 31850 0.029 1830 26540 0.024 1260 50000 0.034 3390
431850 0.045 2870 23890 0.038 1830 19900 0.032 1250 50000 0.045 4500
525480 0.056 2880 19110 0.048 1830 15920 0.040 1260 50000 0.056 5640
621230 0.068 2870 15920 0.057 1830 13270 0.047 1260 42460 0.068 5740
815920 0.090 2860 11940 0.076 1820 9950 0.063 1250 31850 0.090 5720
10 12740 0.112 2860 9550 0.096 1820 7960 0.079 1250 25480 0.112 5730
12 10620 0.134 2850 7960 0.114 1820 6630 0.094 1250 21230 0.134 5710
14 9100 0.157 2850 6820 0.133 1820 5690 0.110 1250 18200 0.157 5700
16 7960 0.177 2820 5970 0.151 1800 4980 0.124 1240 15920 0.177 5650
18 7080 0.200 2830 5310 0.170 1800 4420 0.140 1240 14150 0.200 5650
20 6370 0.222 2830 4780 0.188 1800 3980 0.155 1240 12740 0.222 5650
< D3 ap x ae D x 0.5D
ALU - Square
511
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
ALU
CUTTING PARAMETERS
MDCSA2
DRILLING
Material Group
ISO 513 N1 N2 N3 N4 N5
Material Alluminium ≤ 12% Si -
Copper Alloy
Alluminium > 12% Si -
Copper Alloy Brass and bronze Plastics
ap x ae 0.5D x D 0.5D x D 0.5D x D 0.5D x D
Vc (m/min) 200-400 150-350 150-350 500-900
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
150000 0.006 560 50000 0.005 480 50000 0.004 390 50000 0.006 560
1.5 50000 0.008 840 50000 0.007 710 50000 0.006 590 50000 0.008 840
247770 0.011 1070 39810 0.010 760 39810 0.008 620 50000 0.011 1120
331850 0.014 900 26540 0.012 640 26540 0.010 520 50000 0.014 1410
423890 0.019 900 19900 0.016 630 19900 0.013 520 50000 0.019 1880
519110 0.024 900 15920 0.020 640 15920 0.016 520 44590 0.024 2100
615920 0.028 900 13270 0.024 640 13270 0.020 520 37150 0.028 2090
811940 0.037 890 9950 0.032 630 9950 0.026 520 27870 0.037 2090
10 9550 0.047 890 7960 0.040 630 7960 0.033 520 22290 0.047 2090
12 7960 0.056 890 6630 0.048 630 6630 0.039 520 18580 0.056 2080
14 6820 0.065 890 5690 0.055 630 5690 0.046 520 15920 0.065 2080
16 5970 0.074 880 4980 0.063 630 4980 0.052 520 13930 0.074 2060
18 5310 0.083 880 4420 0.071 620 4420 0.058 510 12380 0.083 2060
20 4780 0.092 880 3980 0.079 630 3980 0.065 510 11150 0.092 2060
< D3 ap x ae 0.25D x D
ALU - Square
512
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
ALU
h stock standard f non-standard stock m stock exhaustion
D D Tol. C C Tol. d(h6) l l1 L z EDP No. Stock
10/-0.020 4 3 50 3 MDCSA3010 h
1.5 0/-0.020 4 4.5 50 3 MDCSA3015 h
20/-0.020 4 6 50 3 MDCSA3020 h
30/-0.020 4 8 50 3 MDCSA3030 h
40/-0.020 4 11 50 3 MDCSA3040 h
50/-0.020 6 13 50 3 MDCSA3050 h
60/-0.020 6 15 50 3 MDCSA3060 h
80/-0.025 8 20 60 3 MDCSA3080 h
10 0/-0.025 10 25 75 3 MDCSA3100 h
12 0/-0.025 12 30 75 3 MDCSA3120 h
16 0/-0.030 16 40 100 3 MDCSA3160 h
20 0/-0.030 20 40 100 3 MDCSA3200 h
MDCSA3
cylindrical shank, 3 flutes, polished
OSAWA
NORM POLISHED
PMKNSH
+
+ 1st choice , suitable
SLOTTING
SIDE MILLING
ALU - Square
513
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
ALU
CUTTING PARAMETERS
MDCSA3
SLOTTING
Material Group
ISO 513 N1 N2 N3 N4 N5
Material Alluminium ≤ 12% Si -
Copper Alloy
Alluminium > 12% Si -
Copper Alloy Brass and bronze Plastics
ap x ae 0.5D x D 0.5D x D 0.5D x D 0.5D x D
Vc (m/min) 200-600 150-350 150-250 500-900
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
150000 0.010 1510 50000 0.009 1290 50000 0.007 1060 50000 0.010 1510
1.5 50000 0.015 2270 50000 0.013 1930 42460 0.011 1350 50000 0.015 2270
250000 0.020 3020 39810 0.017 2050 31850 0.014 1350 50000 0.020 3020
337150 0.025 2830 26540 0.022 1720 21230 0.018 1130 50000 0.025 3810
427870 0.034 2820 19900 0.029 1710 15920 0.024 1130 50000 0.034 5070
522290 0.042 2830 15920 0.036 1720 12740 0.030 1130 44590 0.042 5660
618580 0.051 2830 13270 0.043 1720 10620 0.035 1130 37150 0.051 5650
813930 0.067 2810 9950 0.057 1710 7960 0.047 1130 27870 0.067 5630
10 11150 0.084 2820 7960 0.072 1710 6370 0.059 1130 22290 0.084 5640
12 9290 0.101 2810 6630 0.086 1700 5310 0.071 1120 18580 0.101 5620
14 7960 0.117 2800 5690 0.100 1700 4550 0.082 1120 15920 0.117 5610
16 6970 0.133 2780 4980 0.113 1690 3980 0.093 1110 13930 0.133 5560
18 6190 0.150 2780 4420 0.127 1690 3540 0.105 1110 12380 0.150 5560
20 5570 0.166 2780 3980 0.141 1690 3180 0.116 1110 11150 0.166 5560
< D3 ap x ae 0.25D x D
SIDE MILLING
Material Group
ISO 513 N1 N2 N3 N4 N5
Material Alluminium ≤ 12% Si -
Copper Alloy
Alluminium > 12% Si -
Copper Alloy Brass and bronze Plastics
ap x ae 1.5D x 0.3D 1.5D x 0.3D 1.5D x 0.3D 1.5D x 0.3D
Vc (m/min) 300-500 200-400 150-350 600-1000
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
150000 0.012 1810 50000 0.010 1540 50000 0.008 1270 50000 0.012 1810
1.5 50000 0.018 2720 50000 0.015 2310 50000 0.013 1910 50000 0.018 2720
250000 0.024 3630 50000 0.021 3080 39810 0.017 2020 50000 0.024 3630
342460 0.030 3880 31850 0.026 2480 26540 0.021 1700 50000 0.030 4570
431850 0.041 3870 23890 0.034 2470 19900 0.028 1690 50000 0.041 6080
525480 0.051 3880 19110 0.043 2480 15920 0.036 1700 50000 0.051 7620
621230 0.061 3880 15920 0.052 2470 13270 0.043 1700 42460 0.061 7750
815920 0.081 3860 11940 0.069 2460 9950 0.057 1690 31850 0.081 7720
10 12740 0.101 3860 9550 0.086 2460 7960 0.071 1690 25480 0.101 7730
12 10620 0.121 3850 7960 0.103 2460 6630 0.085 1680 21230 0.121 7700
14 9100 0.141 3850 6820 0.120 2450 5690 0.099 1680 18200 0.141 7690
16 7960 0.160 3810 5970 0.136 2430 4980 0.112 1670 15920 0.160 7630
18 7080 0.180 3820 5310 0.153 2430 4420 0.126 1670 14150 0.180 7630
20 6370 0.200 3810 4780 0.170 2430 3980 0.140 1670 12740 0.200 7630
< D3 ap x ae D x 0.1D
ALU - Square
514
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
ALU
h stock standard f non-standard stock m stock exhaustion
D D Tol. C C Tol. d(h6) l l1 L z EDP No. Stock
30/-0.030 6 12 75 3 MDA310030 h
40/-0.030 6 16 75 3 MDA310040 h
50/-0.030 6 20 75 3 MDA310050 h
60/-0.030 6 25 75 3 MDA310060 h
30/-0.030 6 15 100 3 MDA311030 h
40/-0.030 6 20 100 3 MDA311040 h
50/-0.030 6 25 100 3 MDA311050 h
60/-0.030 6 30 100 3 MDA311060 h
80/-0.035 8 35 100 3 MDA311080 h
10 0/-0.035 10 40 100 3 MDA311100 h
12 0/-0.035 12 45 100 3 MDA311120 h
80/-0.035 8 40 150 3 MDA312080 h
10 0/-0.035 10 50 150 3 MDA312100 h
12 0/-0.035 12 50 150 3 MDA312120 h
16 0/-0.040 16 70 150 3 MDA312160 h
20 0/-0.040 20 80 150 3 MDA312200 h
MDA310-11-12
cylindrical shank, 3 flutes polished, long
OSAWA
NORM POLISHED
MDA310
MDA311 - MDA312
PMKNSH
+
+ 1st choice , suitable
SLOTTING
SIDE MILLING
ALU - Square
515
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
ALU
CUTTING PARAMETERS
MDA310
SLOTTING
Material Group
ISO 513 N1 N2 N3 N4 N5
Material Alluminium ≤ 12% Si -
Copper Alloy
Alluminium > 12% Si -
Copper Alloy Brass and bronze Plastics
ap x ae 0.3D x D 0.3D x D 0.3D x D 0.3D x D
Vc (m/min) 220-340 150-250 100-200 400-700
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
329720 0.023 2040 21230 0.019 1240 15920 0.016 760 50000 0.023 3430
422290 0.030 2030 15920 0.026 1230 11940 0.021 760 50000 0.030 4560
517830 0.038 2040 12740 0.032 1240 9550 0.027 760 35030 0.038 4000
614860 0.046 2030 10620 0.039 1240 7960 0.032 760 29190 0.046 4000
SIDE MILLING
Material Group
ISO 513 N1 N2 N3 N4 N5
Material Alluminium ≤ 12% Si -
Copper Alloy
Alluminium > 12% Si -
Copper Alloy Brass and bronze Plastics
ap x ae 1.5D x 0.1D 1.5D x 0.1D 1.5D x 0.1D 1.5D x 0.1D
Vc (m/min) 270-370 200-300 150-250 500-800
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
333970 0.027 2800 26540 0.023 1860 21230 0.019 1220 50000 0.027 4120
425480 0.036 2790 19900 0.031 1850 15920 0.026 1220 50000 0.036 5470
520380 0.046 2800 15920 0.039 1860 12740 0.032 1220 50000 0.046 6860
616990 0.055 2790 13270 0.047 1850 10620 0.038 1220 34500 0.055 5670
MDA311
SLOTTING
Material Group
ISO 513 N1 N2 N3 N4 N5
Material Alluminium ≤ 12% Si -
Copper Alloy
Alluminium > 12% Si -
Copper Alloy Brass and bronze Plastics
ap x ae 0.3D x D 0.3D x D 0.3D x D 0.3D x D
Vc (m/min) 180-280 110-210 100-160 350-550
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
324420 0.019 1400 16990 0.016 830 13800 0.013 550 50000 0.019 2860
418310 0.025 1390 12740 0.022 820 10350 0.018 550 50000 0.025 3800
514650 0.032 1400 10190 0.027 830 8280 0.022 550 28660 0.032 2730
612210 0.038 1390 8490 0.032 820 6900 0.027 550 23890 0.038 2730
89160 0.051 1390 6370 0.043 820 5180 0.035 550 17910 0.051 2710
10 7320 0.063 1390 5100 0.054 820 4140 0.044 550 14330 0.063 2720
12 6100 0.076 1380 4250 0.064 820 3450 0.053 550 11940 0.076 2710
Material Group
ISO 513 N1 N2 N3 N4 N5
SIDE MILLING
Material Alluminium ≤ 12% Si -
Copper Alloy
Alluminium > 12% Si -
Copper Alloy Brass and bronze Plastics
ap x ae 2D x 0.05D 2D x 0.05D 2D x 0.05D 2D x 0.05D
Vc (m/min) 210-310 150-250 110-210 420-620
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
327600 0.023 1890 21230 0.019 1240 16990 0.016 820 50000 0.023 3430
420700 0.030 1890 15920 0.026 1230 12740 0.021 810 50000 0.030 4560
516560 0.038 1890 12740 0.032 1240 10190 0.027 820 50000 0.038 5720
613800 0.046 1890 10620 0.039 1240 8490 0.032 810 27600 0.046 3780
810350 0.061 1880 7960 0.052 1230 6370 0.042 810 20700 0.061 3760
10 8280 0.076 1880 6370 0.064 1230 5100 0.053 810 16560 0.076 3770
12 6900 0.091 1880 5310 0.077 1230 4250 0.064 810 13800 0.091 3760
ALU - Square
516
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
ALU
CUTTING PARAMETERS
MDA312
SLOTTING
Material Group
ISO 513 N1 N2 N3 N4 N5
Material Alluminium ≤ 12% Si -
Copper Alloy
Alluminium > 12% Si -
Copper Alloy Brass and bronze Plastics
ap x ae 0.1D x D 0.1D x D 0.1D x D 0.1D x D
Vc (m/min) 130-230 100-160 80-120 250-450
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
87170 0.040 870 5180 0.034 530 3980 0.028 340 13930 0.040 1690
10 5730 0.051 870 4140 0.043 530 3180 0.035 340 11150 0.051 1690
12 4780 0.060 870 3450 0.051 530 2650 0.042 340 9290 0.060 1690
16 3580 0.080 860 2590 0.068 530 1990 0.056 330 6970 0.080 1670
20 2870 0.100 860 2070 0.085 530 1590 0.070 330 5570 0.100 1670
SIDE MILLING
Material Group
ISO 513 N1 N2 N3 N4 N5
Material Alluminium ≤ 12% Si -
Copper Alloy
Alluminium > 12% Si -
Copper Alloy Brass and bronze Plastics
ap x ae 2.5D x 0.05D 2.5D x 0.05D 2.5D x 0.05D 2.5D x 0.05D
Vc (m/min) 150-250 100-200 100-160 300-500
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
87960 0.048 1160 5970 0.041 740 5180 0.034 530 15920 0.048 2320
10 6370 0.061 1160 4780 0.052 740 4140 0.042 530 12740 0.061 2320
12 5310 0.073 1160 3980 0.062 740 3450 0.051 530 10620 0.073 2310
16 3980 0.096 1140 2990 0.081 730 2590 0.067 520 7960 0.096 2290
20 3180 0.120 1140 2390 0.102 730 2070 0.084 520 6370 0.120 2290
ALU - Square
517
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
ALU
h stock standard f non-standard stock m stock exhaustion
D D Tol. C C Tol. d(h6) l l1 L z EDP No. Stock
60/-0.025 6 15 57 6 MDCSAM060 h
80/-0.030 8 20 64 6 MDCSAM080 h
10 0/-0.030 10 22 75 6 MDCSAM100 h
12 0/-0.030 12 25 75 6 MDCSAM120 h
MDCSAM
cylindrical shank, 6F, polished
OSAWA
NORM POLISHED
PMKNSH
+
+ 1st choice , suitable
SIDE MILLING
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
ALU
ALU - Square
518
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
ALU
CUTTING PARAMETERS
MDCSAM
SIDE MILLING
Material Group
ISO 513 N1 N2 N3 N4 N5
Material Alluminium ≤ 12% Si -
Copper Alloy
Alluminium > 12% Si -
Copper Alloy Brass and bronze Plastics
ap x ae 1.5D x 0.05D 1.5D x 0.05D 1.5D x 0.05D 1.5D x 0.05D
Vc (m/min) 600-1000 400-800 300-700 900-1300
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
642460 0.050 12810 31850 0.043 8170 26540 0.035 5610 50000 0.050 15090
831850 0.067 12770 23890 0.057 8140 19900 0.047 5580 43790 0.067 17550
10 25480 0.084 12780 19110 0.071 8150 15920 0.059 5590 35030 0.084 17570
12 21230 0.100 12740 15920 0.085 8120 13270 0.070 5570 29190 0.100 17510
ALU - Corner radius
519
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
ALU
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
ALU
h stock standard f non-standard stock m stock exhaustion
D D Tol. CR CR Tol. d(h6) l l1 d1 L z EDP No. Stock
20/-0.030 0.20 +/-0.020 3 3 6 1.90 40 2 MCA212R02020 h
30/-0.030 0.20 +/-0.020 3 4 8 2.80 40 2 MCA212R02030 h
40/-0.030 0.20 +/-0.020 4 5 12 3.70 50 2 MCA212R02040 h
50/-0.030 0.20 +/-0.020 5 8 14 4.80 50 2 MCA212R02050 h
60/-0.030 0.20 +/-0.020 6 8 18 5.50 65 2 MCA212R02060 h
80/-0.030 0.20 +/-0.020 8 10 22 7.40 70 2 MCA212R02080 h
10 0/-0.030 0.20 +/-0.020 10 14 28 9.70 80 2 MCA212R02100 h
12 0/-0.030 0.20 +/-0.020 12 16 35 11.00 90 2 MCA212R02120 h
MCA212R
cylindrical shank, 2 flutes, corner radius
OSAWA
NORM
PMKNSH
+
+ 1st choice , suitable
SLOTTING
SIDE MILLING
CR
CR
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
ALU
ALU - Corner radius
520
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
ALU
CUTTING PARAMETERS
MCA212R
SLOTTING
Material Group
ISO 513 N1 N2 N3 N4 N5
Material Alluminium ≤ 12% Si -
Copper Alloy
Alluminium > 12% Si -
Copper Alloy Brass and bronze Plastics
ap x ae 0.5D x D 0.5D x D 0.5D x D 0.5D x D
Vc (m/min) 200-600 200-400 150-350 600-1000w
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
250000 0.022 2240 47770 0.019 1820 39810 0.016 1250 50000 0.022 2240
342460 0.028 2400 31850 0.024 1530 26540 0.020 1050 50000 0.028 2820
431850 0.038 2390 23890 0.032 1520 19900 0.026 1050 50000 0.038 3750
525480 0.047 2400 19110 0.040 1530 15920 0.033 1050 50000 0.047 4700
621230 0.056 2390 15920 0.048 1520 13270 0.039 1050 42460 0.056 4780
815920 0.075 2380 11940 0.064 1520 9950 0.052 1040 31850 0.075 4770
10 12740 0.094 2390 9550 0.080 1520 7960 0.066 1040 25480 0.094 4770
12 10620 0.112 2380 7960 0.095 1520 6630 0.078 1040 21230 0.112 4760
< D3 ap x ae 0.25D x D
SIDE MILLING
Material Group
ISO 513 N1 N2 N3 N4 N5
Material Alluminium ≤ 12% Si -
Copper Alloy
Alluminium > 12% Si -
Copper Alloy Brass and bronze Plastics
ap x ae 1.5D x 0.3D 1.5D x 0.3D 1.5D x 0.3D 1.5D x 0.3D
Vc (m/min) 300-600 250-450 200-400 600-1000
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
250000 0.027 2690 50000 0.023 2280 47770 0.019 1800 50000 0.027 2690
347770 0.034 3240 37150 0.029 2140 31850 0.024 1510 50000 0.034 3390
435830 0.045 3230 27870 0.038 2130 23890 0.032 1510 50000 0.045 4500
528660 0.056 3240 22290 0.048 2140 19110 0.040 1510 50000 0.056 5640
623890 0.068 3230 18580 0.057 2140 15920 0.047 1510 42460 0.068 5740
817910 0.090 3220 13930 0.076 2130 11940 0.063 1500 31850 0.090 5720
10 14330 0.112 3220 11150 0.096 2130 9550 0.079 1500 25480 0.112 5730
12 11940 0.134 3210 9290 0.114 2120 7960 0.094 1500 21230 0.134 5710
< D3 ap x ae D x 0.5D
ALU - Ball nose
521
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
ALU
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
ALU
h stock standard f non-standard stock m stock exhaustion
D D Tol. R R Tol. d(h6) l l1 L z EDP No. Stock
10/-0.020 0.50 +/-0.010 4 2 50 2 MDCAB2010 h
1.5 0/-0.020 0.75 +/-0.010 4 3 50 2 MDCAB2015 h
20/-0.020 1.00 +/-0.010 4 4 50 2 MDCAB2020 h
30/-0.020 1.50 +/-0.010 4 6 50 2 MDCAB2030 h
40/-0.020 2.00 +/-0.010 4 8 50 2 MDCAB2040 h
50/-0.020 2.50 +/-0.010 6 10 50 2 MDCAB2050 h
60/-0.020 3.00 +/-0.010 6 12 50 2 MDCAB2060 h
80/-0.025 4.00 +/-0.010 8 16 60 2 MDCAB2080 h
10 0/-0.025 5.00 +/-0.010 10 20 75 2 MDCAB2100 h
12 0/-0.025 6.00 +/-0.010 12 24 75 2 MDCAB2120 h
MDCAB2
cylindrical shank, 2 flutes ball nose, polished
OSAWA
NORM POLISHED
PMKNSH
+
+ 1st choice , suitable
COPYING
R
ALU - Ball nose
522
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
MEX
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
ALU
CUTTING PARAMETERS
MDCAB2
COPYING
ae
ap
Material Group
ISO 513 N1 N2 N3 N4 N5
Material Alluminium ≤ 12% Si -
Copper Alloy
Alluminium > 12% Si -
Copper Alloy Brass and bronze Plastics
ap x ae 0.2D x 0.4D 0.2D x 0.4D 0.2D x 0.4D 0.2D x 0.4D
Vc (m/min) 200-600 250-450 200-400 600-1000
D
(mm)
D (e.)
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
1 0.80 40000 0.013 1010 111460 0.011 2530 95540 0.010 1930 254780 0.013 6420
1.5 1.20 84930 0.017 2850 74310 0.015 2250 63690 0.013 1710 169850 0.017 5710
2 1.60 63690 0.017 2140 55730 0.015 1690 47770 0.013 1280 127390 0.017 4280
2.5 2.00 50960 0.021 2140 44590 0.019 1690 38220 0.017 1280 101910 0.021 4280
3 2.40 42460 0.025 2140 37150 0.023 1690 31850 0.020 1280 84930 0.025 4280
4 3.20 31850 0.035 2230 27870 0.032 1760 23890 0.028 1340 63690 0.035 4460
5 4.00 25480 0.045 2280 22290 0.040 1800 19110 0.036 1370 50960 0.045 4570
6 4.80 21230 0.053 2260 18580 0.048 1780 15920 0.043 1360 42460 0.053 4520
8 6.40 15920 0.067 2140 13930 0.060 1680 11940 0.054 1280 31850 0.067 4280
10 8.00 12740 0.080 2030 11150 0.072 1600 9550 0.064 1220 25480 0.080 4070
12 9.60 10620 0.094 1990 9290 0.084 1570 7960 0.075 1190 21230 0.094 3980
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
MEX
STEEL AND HARDENED STEEL 30÷55 HRC
Ultra-fine micrograin and Endless Orange coating for high
perfromance machining on 30÷55 HRC materials. Wide range
of tools available for general milling, roughing, copying and
super finishing.
Micrograna ultrafine e rivestimento Endless Orange per
lavorazione ad alto rendimento di materiali con durezza
compresa tra 30÷55 HRC. Ampia gamma per soddisfare
applicazioni di fresatura generale, sgrossatura, copiatura e
super finitura.
Besonders feine Mikrokörnung und Beschichtung Endless
Orange für Hochleistungsbearbeitungen von Materialien mit
einer Härte zwischen 30 und 55 HRC. Große Produktpalette
für Anwendungen zum Fräsen im Allgemeinen, Schruppen,
Kopierfräsen und Schlichtbearbeitung.
Ultra Micrograin et revêtement Endless Orange pour un
usinage à rendement élevé de matériaux ayant une dureté
comprise entre 30÷55 HRC. Une large gamme pour satisfaire
les applications de fraisage général, ébauche, copiage et super
finition.
Micrograno ultrafino y revestimiento Endless Orange para el
mecanizado a alto rendimiento de materiales con una dureza
comprendida entre 30 y 55 HRC. Amplia gama para satisfacer
aplicaciones de fresado general, desbaste, copiado y súper
acabado.
Микрозернистая структура твердого сплава и покрытие
Endless Orange служат для высокоэффективной обработки
материалов с твёрдостью 30÷55 HRC. Представлен
широкий ассортимент инструментов для стандартных
операций фрезерования, черновой обработки, обработки
криволинейных поверхностей и чистовой обработки.
MEX - 30÷55HRC - Square
524
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
h stock standard f non-stock standard m stock exhaustion
MEXM2
cylindrical shank, 2 flutes, miniature
OSAWA
NORM
<55
PMKNSH
++ +
+ 1st choice , suitable
SLOTTING
D D Tol. CR CR Tol. d(h6) l l1 L z EDP No. Stock
0.3 0/-0.020 4 0.6 40 2 MEXM20030 h
0.4 0/-0.020 4 0.8 40 2 MEXM20040 h
0.5 0/-0.020 4 1 40 2 MEXM20050 h
0.6 0/-0.020 4 1.2 40 2 MEXM20060 h
0.7 0/-0.020 4 1.4 40 2 MEXM20070 h
0.8 0/-0.020 4 1.6 40 2 MEXM20080 h
0.9 0/-0.020 4 1.8 40 2 MEXM20090 h
10/-0.020 3 2 40 2 MEXM20100 h
1.1 0/-0.020 3 2.2 40 2 MEXM20110 h
1.2 0/-0.020 3 2.4 40 2 MEXM20120 h
1.3 0/-0.020 3 2.6 40 2 MEXM20130 h
1.4 0/-0.020 3 2.8 40 2 MEXM20140 h
1.5 0/-0.020 3 3 40 2 MEXM20150 h
1.6 0/-0.020 3 3.2 40 2 MEXM20160 h
1.7 0/-0.020 3 3.4 40 2 MEXM20170 h
1.8 0/-0.020 3 3.6 40 2 MEXM20180 h
1.9 0/-0.020 3 3.8 40 2 MEXM20190 h
20/-0.020 3 4 40 2 MEXM20200 h
MEX - 30÷55HRC - Square
525
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
CUTTING PARAMETERS
MEXM2
SLOTTING
Material
Group
ISO 513
P2 P3 P4 K1 K2 P4 P5 K3 P6 K4 H1 H4 H5
Hardness/Rm < 1000 N/mm² < 35 HRC 35 - 45 HRC 45 - 55 HRC
ap x ae ap x D ap x D ap x D ap x D
Vc (m/min) 70-110 50-90 30-70 20-40
D
(mm)
ap
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
0.3 0.02 40000 0.004 320 40000 0.004 290 40000 0.003 255 31800 0.003 180
0.4 0.02 40000 0.006 480 40000 0.005 430 39800 0.005 380 23900 0.004 200
0.5 0.03 40000 0.007 560 40000 0.006 500 31800 0.006 355 19100 0.005 185
0.6 0.03 40000 0.008 640 37200 0.007 540 26500 0.006 340 15900 0.006 180
0.8 0.04 35800 0.010 720 27900 0.009 500 19900 0.008 320 11900 0.007 165
1 0.05 28700 0.012 690 22300 0.011 480 15900 0.010 305 9600 0.008 160
1.2 0.06 23900 0.022 1050 18600 0.020 740 13300 0.018 470 8000 0.015 245
1.4 0.07 20500 0.024 980 15900 0.022 690 11400 0.019 440 6800 0.017 230
1.5 0.08 19100 0.025 960 14900 0.023 670 10600 0.020 425 6400 0.018 225
1.6 0.08 17900 0.026 930 13900 0.023 650 10000 0.021 415 6000 0.018 220
1.8 0.09 15900 0.028 890 12400 0.025 620 8800 0.022 395 5300 0.020 210
2 0.10 14300 0.030 860 11100 0.027 600 8000 0.024 190 4800 0.021 200
MEX - 30÷55HRC - Square
526
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
h stock standard f non-stock standard m stock exhaustion
MEXM2SC
cylindrical shank, 2 flutes, short cutting length, miniature
OSAWA
NORM
<55
PMKNSH
++ +
+ 1st choice , suitable
SLOTTING
D D Tol. CR CR Tol. d(h6) l l1 L z EDP No. Stock
0.2 0/-0.020 4 0.3 50 2 MEXM2SC0020 h
0.3 0/-0.020 4 0.4 50 2 MEXM2SC0030 h
0.4 0/-0.020 4 0.6 50 2 MEXM2SC0040 h
0.5 0/-0.020 4 0.7 50 2 MEXM2SC0050 h
0.6 0/-0.020 4 0.9 50 2 MEXM2SC0060 h
0.7 0/-0.020 4 1 50 2 MEXM2SC0070 h
0.8 0/-0.020 4 1.2 50 2 MEXM2SC0080 h
0.9 0/-0.020 4 1.4 50 2 MEXM2SC0090 h
MEX - 30÷55HRC - Square
527
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
CUTTING PARAMETERS
MEXM2SC
SLOTTING
Material
Group
ISO 513
P2 P3 P4 K1 K2 P4 P5 K3 P6 K4 H1 H4 H5
Hardness/Rm < 1000 N/mm² < 35 HRC 35 - 45 HRC 45 - 55 HRC
ap x ae ap x D ap x D ap x D ap x D
Vc (m/min) 70-110 50-90 30-70 20-40
D
(mm)
ap
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
0.2 0.01 40000 0.003 240 40000 0.003 220 40000 0.002 190 40000 0.002 170
0.3 0.02 40000 0.004 320 40000 0.004 290 40000 0.003 255 31850 0.003 180
0.4 0.02 40000 0.006 480 40000 0.005 430 39810 0.005 380 23890 0.004 200
0.5 0.03 40000 0.007 560 40000 0.006 500 31850 0.006 355 19110 0.005 185
0.6 0.03 40000 0.008 640 37150 0.007 530 26540 0.006 340 15920 0.006 180
0.8 0.04 35830 0.010 720 27870 0.009 500 19900 0.008 320 11940 0.007 165
0.9 0.05 31850 0.012 760 24770 0.011 540 17690 0.010 340 10620 0.008 180
MEX - 30÷55HRC - Square
528
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
h stock standard f non-stock standard m stock exhaustion
D D Tol. CR CR Tol. d(h6) l l1 d1 L z 30’ 1° 1°30’ 2° 3° EDP No. Stock
0.2 0/-0.020 4 0.3 0.5 0.16 50 2 0.57 0.59 0.61 0.63 0.68 MEXLN2002005 h
0.2 0/-0.020 4 0.3 1 0.16 50 2 1.09 1.12 1.16 1.21 1.30 MEXLN200201 h
0.2 0/-0.020 4 0.3 1.5 0.16 50 2 1.60 1.66 1.72 1.78 1.91 MEXLN2002015 h
0.3 0/-0.020 4 0.4 1 0.26 50 2 1.09 1.12 1.16 1.21 1.30 MEXLN200301 h
0.3 0/-0.020 4 0.4 2 0.26 50 2 2.12 2.19 2.27 2.35 2.53 MEXLN200302 h
0.3 0/-0.020 4 0.4 3 0.26 50 2 3.15 3.26 3.38 3.50 3.76 MEXLN200303 h
0.4 0/-0.020 4 0.6 2 0.37 50 2 2.12 2.19 2.27 2.35 2.53 MEXLN200402 h
0.4 0/-0.020 4 0.6 3 0.37 50 2 3.15 3.26 3.38 3.50 3.76 MEXLN200403 h
0.4 0/-0.020 4 0.6 4 0.37 50 2 4.19 4.33 4.49 4.65 5.00 MEXLN200404 h
0.4 0/-0.020 4 0.6 5 0.37 50 2 5.22 5.40 5.59 5.79 6.23 MEXLN200405 h
0.5 0/-0.020 4 0.7 2 0.45 50 2 2.16 2.23 2.31 2.40 2.57 MEXLN200502 h
0.5 0/-0.020 4 0.7 4 0.45 50 2 4.23 4.37 4.53 4.69 5.04 MEXLN200504 h
0.5 0/-0.020 4 0.7 6 0.45 50 2 6.29 6.51 6.74 6.98 7.51 MEXLN200506 h
0.5 0/-0.020 4 0.7 8 0.45 50 2 8.36 8.65 8.96 9.28 9.98 MEXLN200508 h
0.6 0/-0.020 4 0.9 2 0.55 50 2 2.16 2.23 2.31 2.40 2.57 MEXLN200602 h
0.6 0/-0.020 4 0.9 4 0.55 50 2 4.23 4.37 4.53 4.69 5.04 MEXLN200604 h
0.6 0/-0.020 4 0.9 6 0.55 50 2 6.29 6.51 6.74 6.98 7.51 MEXLN200606 h
0.6 0/-0.020 4 0.9 8 0.55 50 2 8.36 8.65 8.96 9.28 9.98 MEXLN200608 h
0.6 0/-0.020 4 0.9 10 0.55 50 2 10.43 10.79 11.17 11.57 12.44 MEXLN200610 h
0.7 0/-0.020 4 1.0 2 0.65 50 2 2.16 2.23 2.31 2.40 2.57 MEXLN200702 h
0.7 0/-0.020 4 1.0 4 0.65 50 2 4.23 4.37 4.53 4.69 5.04 MEXLN200704 h
0.7 0/-0.020 4 1.0 6 0.65 50 2 6.29 6.51 6.74 6.98 7.51 MEXLN200706 h
0.7 0/-0.020 4 1.0 8 0.65 50 2 8.36 8.65 8.96 9.28 9.98 MEXLN200708 h
0.7 0/-0.020 4 1.0 10 0.65 50 2 10.43 10.79 11.17 11.57 12.44 MEXLN200710 h
0.8 0/-0.020 4 1.2 4 0.75 50 2 4.23 4.37 4.53 4.69 5.04 MEXLN200804 h
0.8 0/-0.020 4 1.2 6 0.75 50 2 6.29 6.51 6.74 6.98 7.51 MEXLN200806 h
0.8 0/-0.020 4 1.2 8 0.75 50 2 8.36 8.65 8.96 9.28 9.98 MEXLN200808 h
0.8 0/-0.020 4 1.2 10 0.75 50 2 10.43 10.79 11.17 11.57 12.44 MEXLN200810 h
0.8 0/-0.020 4 1.2 12 0.75 50 2 12.49 12.93 13.38 13.87 14.91 MEXLN200812 h
0.9 0/-0.020 4 1.4 6 0.85 50 2 6.29 6.51 6.74 6.98 7.51 MEXLN200906 h
0.9 0/-0.020 4 1.4 8 0.85 50 2 8.36 8.65 8.96 9.28 9.98 MEXLN200908 h
0.9 0/-0.020 4 1.4 10 0.85 50 2 10.43 10.79 11.17 11.57 12.44 MEXLN200910 h
0.9 0/-0.020 4 1.4 15 0.85 50 2 15.6 16.14 16.71 17.31 18.61 MEXLN200915 h
1.0 0/-0.020 4 1.5 6 0.95 50 2 6.39 6.61 6.84 7.09 7.62 MEXLN201006 h
1.0 0/-0.020 4 1.5 8 0.95 50 2 8.46 8.75 9.06 9.38 10.09 MEXLN201008 h
1.0 0/-0.020 4 1.5 10 0.95 50 2 10.52 10.89 11.27 11.68 12.56 MEXLN201010 h
1.0 0/-0.020 4 1.5 12 0.95 50 2 12.59 13.03 13.49 13.97 15.02 MEXLN201012 h
1.0 0/-0.020 4 1.5 14 0.95 50 2 14.66 15.17 15.70 16.27 17.49 MEXLN201014 h
1.0 0/-0.020 4 1.5 16 0.95 50 2 16.73 17.3 17.92 18.56 19.96 MEXLN201016 h
MEXLN2
cylindrical shank, 2 flutes, extended and reduced neck
OSAWA
NORM
<55
PMKNSH
++ +
+ 1st choice , suitable
SQUARE RIB
α
actual length
actual length according to _ angle
MEX - 30÷55HRC - Square
529
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
h stock standard f non-stock standard m stock exhaustion
D D Tol. CR CR Tol. d(h6) l l1 d1 L z 30’ 1° 1°30’ 2° 3° EDP No. Stock
1.2 0/-0.020 4 1.8 6 1.15 50 2 6.39 6.61 6.84 7.09 7.62 MEXLN201206 h
1.2 0/-0.020 4 1.8 8 1.15 50 2 8.46 8.75 9.06 9.38 10.09 MEXLN201208 h
1.2 0/-0.020 4 1.8 10 1.15 50 2 10.52 10.89 11.27 11.68 12.56 MEXLN201210 h
1.2 0/-0.020 4 1.8 12 1.15 50 2 12.59 13.03 13.49 13.97 15.02 MEXLN201212 h
1.4 0/-0.020 4 2.1 6 1.35 50 2 6.39 6.61 6.84 7.09 7.62 MEXLN201406 h
1.4 0/-0.020 4 2.1 8 1.35 50 2 8.46 8.75 9.06 9.38 10.09 MEXLN201408 h
1.4 0/-0.020 4 2.1 10 1.35 50 2 10.52 10.89 11.27 11.68 12.56 MEXLN201410 h
1.4 0/-0.020 4 2.1 12 1.35 50 2 12.59 13.03 13.49 13.97 15.02 MEXLN201412 h
1.4 0/-0.020 4 2.1 16 1.35 50 2 16.73 17.3 17.92 18.56 19.96 MEXLN201416 h
1.5 0/-0.020 4 2.3 6 1.45 50 2 6.39 6.61 6.84 7.09 7.62 MEXLN201506 h
1.5 0/-0.020 4 2.3 8 1.45 50 2 8.46 8.75 9.06 9.38 10.09 MEXLN201508 h
1.5 0/-0.020 4 2.3 10 1.45 50 2 10.52 10.89 11.27 11.68 12.56 MEXLN201510 h
1.5 0/-0.020 4 2.3 12 1.45 50 2 12.59 13.03 13.49 13.97 15.02 MEXLN201512 h
1.5 0/-0.020 4 2.3 14 1.45 50 2 14.66 15.17 15.70 16.27 17.49 MEXLN201514 h
1.5 0/-0.020 4 2.3 16 1.45 50 2 16.73 17.30 17.92 18.56 19.96 MEXLN201516 h
1.5 0/-0.020 4 2.3 18 1.45 60 2 18.79 19.44 20.13 20.86 22.43 MEXLN201518 h
1.5 0/-0.020 4 2.3 20 1.45 60 2 20.86 21.58 22.35 23.15 - MEXLN201520 h
1.6 0/-0.020 4 2.4 6 1.55 50 2 6.39 6.61 6.84 7.09 7.62 MEXLN201606 h
1.6 0/-0.020 4 2.4 8 1.55 50 2 8.46 8.75 9.06 9.38 10.09 MEXLN201608 h
1.6 0/-0.020 4 2.4 10 1.55 50 2 10.52 10.89 11.27 11.68 12.56 MEXLN201610 h
1.6 0/-0.020 4 2.4 12 1.55 50 2 12.59 13.03 13.49 13.97 15.02 MEXLN201612 h
1.6 0/-0.020 4 2.4 14 1.55 50 2 14.66 15.17 15.70 16.27 17.49 MEXLN201614 h
1.6 0/-0.020 4 2.4 16 1.55 50 2 16.73 17.30 17.92 18.56 19.96 MEXLN201616 h
1.6 0/-0.020 4 2.4 18 1.55 60 2 18.79 19.44 20.13 20.86 22.43 MEXLN201618 h
1.6 0/-0.020 4 2.4 20 1.55 60 2 20.86 21.58 22.35 23.15 - MEXLN201620 h
1.8 0/-0.020 4 2.7 6 1.75 50 2 6.39 6.61 6.84 7.09 7.62 MEXLN201806 h
1.8 0/-0.020 4 2.7 8 1.75 50 2 8.46 8.75 9.06 9.38 10.09 MEXLN201808 h
1.8 0/-0.020 4 2.7 10 1.75 50 2 10.52 10.89 11.27 11.68 12.56 MEXLN201810 h
1.8 0/-0.020 4 2.7 12 1.75 50 2 12.59 13.03 13.49 13.97 15.02 MEXLN201812 h
1.8 0/-0.020 4 2.7 16 1.75 50 2 16.73 17.30 17.92 18.56 19.96 MEXLN201816 h
1.8 0/-0.020 4 2.7 20 1.75 60 2 20.86 21.58 22.35 23.15 - MEXLN201820 h
20/-0.020 4 3 6 1.95 50 2 6.39 6.61 6.84 7.09 7.62 MEXLN202006 h
20/-0.020 4 3 8 1.95 50 2 8.46 8.75 9.06 9.38 10.09 MEXLN202008 h
20/-0.020 4 3 10 1.95 50 2 10.52 10.89 11.27 11.68 12.56 MEXLN202010 h
20/-0.020 4 3 12 1.95 50 2 12.59 13.03 13.49 13.97 15.02 MEXLN202012 h
20/-0.020 4 3 14 1.95 50 2 14.66 15.17 15.70 16.27 17.49 MEXLN202014 h
20/-0.020 4 3 16 1.95 50 2 16.73 17.30 17.92 18.56 - MEXLN202016 h
20/-0.020 4 3 18 1.95 60 2 18.79 19.44 20.13 20.86 - MEXLN202018 h
20/-0.020 4 3 20 1.95 60 2 20.86 21.58 22.35 23.15 - MEXLN202020 h
MEXLN2
cylindrical shank, 2 flutes, extended and reduced neck
OSAWA
NORM
<55
PMKNSH
++ +
+ 1st choice , suitable
SQUARE RIB
α
actual length
actual length according to _ angle
MEX - 30÷55HRC - Square
530
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
h stock standard f non-stock standard m stock exhaustion
D D Tol. CR CR Tol. d(h6) l l1 d1 L z 30’ 1° 1°30’ 2° 3° EDP No. Stock
20/-0.020 4 3 25 1.95 75 2 26.03 26.93 27.88 - - MEXLN202025 h
20/-0.020 4 3 30 1.95 75 2 31.20 32.28 33.42 - - MEXLN202030 h
2.5 0/-0.020 4 3.7 8 2.40 50 2 8.46 8.75 9.06 9.38 10.09 MEXLN202508 h
2.5 0/-0.020 4 3.7 10 2.40 50 2 10.52 10.89 11.27 11.68 12.56 MEXLN202510 h
2.5 0/-0.020 4 3.7 12 2.40 50 2 12.59 13.03 13.49 13.97 - MEXLN202512 h
2.5 0/-0.020 4 3.7 16 2.40 50 2 16.73 17.3 17.92 18.56 - MEXLN202516 h
2.5 0/-0.020 4 3.7 20 2.40 60 2 20.86 21.58 22.35 - - MEXLN202520 h
2.5 0/-0.020 4 3.7 25 2.40 60 2 26.03 26.93 27.88 - - MEXLN202525 h
2.5 0/-0.020 4 3.7 30 2.40 75 2 31.20 32.28 - - - MEXLN202530 h
30/-0.025 6 4.5 8 2.85 50 2 8.65 8.95 9.26 9.60 10.31 MEXLN203008 h
30/-0.025 6 4.5 10 2.85 50 2 10.72 11.09 11.48 11.89 12.78 MEXLN203010 h
30/-0.025 6 4.5 12 2.85 50 2 12.78 13.23 13.69 14.18 15.25 MEXLN203012 h
30/-0.025 6 4.5 14 2.85 50 2 14.85 15.36 15.91 16.48 17.72 MEXLN203014 h
30/-0.025 6 4.5 16 2.85 60 2 16.92 17.50 18.12 18.77 20.18 MEXLN203016 h
30/-0.025 6 4.5 18 2.85 60 2 18.99 19.64 20.34 21.07 22.65 MEXLN203018 h
30/-0.025 6 4.5 20 2.85 60 2 21.05 21.78 22.55 23.36 25.12 MEXLN203020 h
30/-0.025 6 4.5 25 2.85 75 2 26.22 27.13 28.09 29.10 - MEXLN203025 h
40/-0.025 6 4.5 10 3.85 60 2 10.91 11.29 11.68 12.10 13.00 MEXLN204010 h
40/-0.025 6 4.5 15 3.85 60 2 16.08 16.63 17.22 17.84 19.17 MEXLN204015 h
40/-0.025 6 4.5 20 3.85 60 2 21.25 21.98 22.76 23.57 - MEXLN204020 h
40/-0.025 6 4.5 25 3.85 75 2 26.41 27.33 28.29 - - MEXLN204025 h
40/-0.025 6 4.5 30 3.85 75 2 31.58 32.67 33.83 - - MEXLN204030 h
40/-0.025 6 4.5 40 3.85 75 2 41.92 43.37 - - - MEXLN204040 h
MEXLN2
cylindrical shank, 2 flutes, extended and reduced neck
OSAWA
NORM
<55
PMKNSH
++ +
+ 1st choice , suitable
SQUARE RIB
α
actual length
actual length according to _ angle
MEX - 30÷55HRC - Square
531
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
CUTTING PARAMETERS
MEXLN2
SQUARE RIB
Material Group
ISO 513 P2 P3 P4 K1 K2 P4 P5 K3 P6 K4 H1 H4 H5
Hardness/Rm < 1000 N/mm² < 35 HRC 35 - 45 HRC 45 - 55 HRC
ap x ae ap x D ap x D ap x D ap x D
Vc (m/min) 70-110 50-90 30-70 20-40
D
(mm)
l1
(mm)
ap
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
0.2
≤ 6D 0.01 40000 0.003 240 40000 0.003 220 40000 0.002 190 40000 0.002 170
≤ 8D 0.01 40000 0.003 200 40000 0.002 180 40000 0.002 165 40000 0.002 145
≤ 10D 0.01 40000 0.002 170 40000 0.002 150 40000 0.002 135 38200 0.001 110
≤ 12D 0.01 40000 0.002 130 40000 0.001 120 40000 0.001 105 33400 0.001 75
0.3
≤ 6D 0.02 40000 0.004 320 40000 0.004 290 40000 0.003 255 31800 0.003 180
≤ 8D 0.01 40000 0.004 290 40000 0.003 260 40000 0.003 230 28700 0.003 145
≤ 10D 0.01 40000 0.003 260 40000 0.003 230 40000 0.003 205 25500 0.002 115
≤ 12D 0.01 40000 0.003 220 40000 0.003 200 37200 0.002 165 22300 0.002 85
0.4
≤ 6D 0.02 40000 0.006 480 40000 0.005 430 39800 0.005 380 23900 0.004 200
≤ 8D 0.02 40000 0.005 430 40000 0.005 390 35800 0.004 310 21500 0.004 165
≤ 10D 0.01 40000 0.005 380 40000 0.004 350 31800 0.004 245 19100 0.003 130
≤ 12D 0.01 40000 0.004 340 40000 0.004 300 27900 0.003 185 16700 0.003 100
0.5
≤ 6D 0.03 40000 0.007 560 40000 0.006 500 31800 0.006 355 19100 0.005 185
≤ 8D 0.02 40000 0.006 500 40000 0.006 450 28700 0.005 290 17200 0.004 150
≤ 10D 0.02 40000 0.006 450 35700 0.005 360 25500 0.004 230 15300 0.004 120
≤ 12D 0.01 40000 0.005 390 31200 0.004 280 22300 0.004 175 13400 0.003 90
0.6
≤ 6D 0.03 40000 0.008 640 37200 0.007 540 26500 0.006 340 15900 0.006 180
≤ 8D 0.03 40000 0.007 580 33400 0.006 430 23900 0.006 275 14300 0.005 145
≤ 10D 0.02 38200 0.006 490 29700 0.006 340 21200 0.005 215 12700 0.004 115
≤ 12D 0.02 33400 0.006 370 26000 0.005 260 18600 0.004 165 11100 0.004 85
0.8
≤ 6D 0.04 35800 0.010 720 27900 0.009 500 19900 0.008 320 11900 0.007 165
≤ 8D 0.03 32200 0.009 580 25100 0.008 410 17900 0.007 260 10700 0.006 135
≤ 10D 0.03 28700 0.008 460 22300 0.007 320 15900 0.006 205 9600 0.006 110
≤ 12D 0.02 25100 0.007 350 19500 0.006 250 13900 0.006 155 8400 0.005 80
1
≤ 6D 0.05 28700 0.012 690 22300 0.011 480 15900 0.010 305 9600 0.008 160
≤ 8D 0.04 25800 0.011 560 20100 0.010 390 14300 0.009 245 8600 0.008 130
≤ 10D 0.04 22900 0.010 440 17800 0.009 310 12700 0.008 195 7600 0.007 100
≤ 12D 0.03 20100 0.008 340 15600 0.008 240 11100 0.007 150 6700 0.006 80
1.2
≤ 6D 0.06 23900 0.022 1050 18600 0.020 740 13300 0.018 470 8000 0.015 245
≤ 8D 0.05 21500 0.020 850 16700 0.018 600 11900 0.016 375 7200 0.014 200
≤ 10D 0.04 19100 0.018 670 14900 0.016 470 10600 0.014 300 6400 0.012 160
≤ 12D 0.03 16700 0.015 510 13000 0.014 360 9300 0.012 230 5600 0.011 120
1.4
≤ 6D 0.07 20500 0.024 980 15900 0.022 690 11400 0.019 440 6800 0.017 230
≤ 8D 0.06 18400 0.022 790 14300 0.019 560 10200 0.017 355 6100 0.015 185
≤ 10D 0.05 16400 0.019 630 12700 0.017 440 9100 0.015 280 5500 0.013 150
≤ 12D 0.04 14300 0.017 480 11100 0.015 340 8000 0.013 215 4800 0.012 115
≤ 15D 0.03 12300 0.014 350 9600 0.013 250 6800 0.012 155 4100 0.010 85
> 15D 0.02 10200 0.012 240 8000 0.011 170 5700 0.010 110 3400 0.008 55
1.5
≤ 6D 0.08 19100 0.025 960 14900 0.023 670 10600 0.020 425 6400 0.018 225
≤ 8D 0.06 17200 0.023 770 13400 0.020 540 9600 0.018 345 5700 0.016 180
≤ 10D 0.05 15300 0.020 610 11900 0.018 430 8500 0.016 270 5100 0.014 145
≤ 12D 0.04 13400 0.018 470 10400 0.016 330 7400 0.014 205 4500 0.012 110
≤ 15D 0.03 11500 0.015 350 8900 0.014 240 6400 0.012 155 3800 0.011 80
> 15D 0.02 9600 0.013 240 7400 0.011 170 5300 0.010 105 3200 0.009 55
1.6
≤ 6D 0.08 17900 0.026 930 13900 0.023 650 10000 0.021 415 6000 0.018 220
≤ 8D 0.07 16100 0.023 750 12500 0.021 530 9000 0.019 335 5400 0.016 175
≤ 10D 0.06 14300 0.021 590 11100 0.019 420 8000 0.017 265 4800 0.015 140
≤ 12D 0.04 12500 0.018 450 9800 0.016 320 7000 0.015 205 4200 0.013 105
≤ 15D 0.04 10700 0.016 330 8400 0.014 240 6000 0.012 150 3600 0.011 80
> 15D 0.02 9000 0.013 230 7000 0.012 160 5000 0.010 105 3000 0.009 55
MEX - 30÷55HRC - Square
532
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
CUTTING PARAMETERS
MEXLN2
SQUARE RIB
Material Group
ISO 513 P2 P3 P4 K1 K2 P4 P5 K3 P6 K4 H1 H4 H5
Hardness/Rm < 1000 N/mm² < 35 HRC 35 - 45 HRC 45 - 55 HRC
ap x ae ap x D ap x D ap x D ap x D
Vc (m/min) 70-110 50-90 30-70 20-40
D
(mm)
l1
(mm)
ap
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
1.8
≤ 6D 0.09 15900 0.028 890 12400 0.025 620 8800 0.022 395 5300 0.020 210
≤ 8D 0.08 14300 0.025 720 11100 0.023 500 8000 0.020 325 4800 0.018 170
≤ 10D 0.06 12700 0.022 570 9900 0.020 400 7100 0.018 255 4200 0.016 130
≤ 12D 0.05 11100 0.020 440 8700 0.018 310 6200 0.016 195 3700 0.014 100
≤ 15D 0.04 9600 0.017 320 7400 0.015 220 5300 0.013 140 3200 0.012 75
> 15D 0.03 8000 0.014 220 6200 0.013 160 4400 0.011 100 2700 0.010 55
2
≤ 6D 0.10 14300 0.030 860 11100 0.027 600 8000 0.024 385 4800 0.021 200
≤ 8D 0.09 12900 0.027 700 10000 0.024 490 7200 0.022 310 4300 0.019 165
≤ 10D 0.07 11500 0.024 550 8900 0.022 380 6400 0.019 245 3800 0.017 130
≤ 12D 0.06 10000 0.021 420 7800 0.019 290 5600 0.017 190 3300 0.015 95
≤ 15D 0.05 8600 0.018 310 6700 0.016 220 4800 0.014 140 2900 0.013 75
> 15D 0.03 8600 0.018 310 6700 0.016 220 4800 0.014 140 2900 0.013 75
2.5
≤ 6D 0.13 11500 0.035 810 8900 0.032 560 6400 0.028 360 3800 0.025 185
≤ 8D 0.11 10300 0.032 650 8000 0.028 450 5700 0.025 285 3400 0.022 150
≤ 10D 0.09 9200 0.028 520 7100 0.025 360 5100 0.022 230 3100 0.020 120
≤ 12D 0.07 8000 0.025 390 6200 0.022 270 4500 0.020 175 2700 0.017 95
≤ 15D 0.06 6900 0.021 290 5400 0.019 200 3800 0.017 130 2300 0.015 70
> 15D 0.04 6900 0.021 290 5400 0.019 200 3800 0.017 130 2300 0.015 70
3
≤ 6D 0.15 9600 0.040 770 7400 0.036 530 5300 0.032 340 3200 0.028 180
≤ 8D 0.13 8600 0.036 620 6700 0.032 430 4800 0.029 275 2900 0.025 145
≤ 10D 0.11 7600 0.032 490 5900 0.029 340 4200 0.026 215 2500 0.022 110
≤ 12D 0.08 6700 0.028 380 5200 0.025 260 3700 0.022 165 2200 0.020 85
≤ 15D 0.07 5700 0.024 270 4500 0.022 190 3200 0.019 125 1900 0.017 65
> 15D 0.05 5700 0.024 270 4500 0.022 190 3200 0.019 125 1900 0.017 65
4
≤ 6D 0.20 7200 0.050 720 5600 0.045 500 4000 0.040 320 2400 0.035 170
≤ 8D 0.17 6400 0.045 580 5000 0.041 410 3600 0.036 260 2100 0.032 130
≤ 10D 0.14 5700 0.040 460 4500 0.036 320 3200 0.032 205 1900 0.028 105
≤ 12D 0.11 5000 0.035 350 3900 0.032 250 2800 0.028 155 1700 0.025 85
≤ 15D 0.09 4300 0.030 260 3300 0.027 180 2400 0.024 115 1400 0.021 60
> 15D 0.06 4300 0.030 260 3300 0.027 180 2400 0.024 115 1400 0.021 60
MEX - 30÷55HRC - Square
533
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
h stock standard f non-stock standard m stock exhaustion
MEXCS2
cylindrical shank, 2 flutes
OSAWA
NORM
<55
≥ Ø14
PMKNSH
++ +
+ 1st choice , suitable
SLOTTING
D D Tol. CR CR Tol. d(h6) l l1 L z EDP No. Stock
10/-0.030 4 2.5 40 2 MEXCS2010 h
1.5 0/-0.030 4 4 40 2 MEXCS2015 h
20/-0.030 4 6 40 2 MEXCS2020 h
2.5 0/-0.030 4 8 40 2 MEXCS2025 h
30/-0.012 6 8 55 2 MEXCS2030 h
3.5 0/-0.012 6 10 55 2 MEXCS2035 h
40/-0.012 6 10 55 2 MEXCS2040 h
4.5 0/-0.012 6 12 55 2 MEXCS2045 h
50/-0.012 6 13 55 2 MEXCS2050 h
5.5 0/-0.012 6 14 55 2 MEXCS2055 h
60/-0.012 6 15 60 2 MEXCS2060 h
6.5 0/-0.012 8 17 65 2 MEXCS2065 h
70/-0.012 8 18 65 2 MEXCS2070 h
80/-0.012 8 20 70 2 MEXCS2080 h
8.5 0/-0.012 10 21 70 2 MEXCS2085 h
90/-0.012 10 23 70 2 MEXCS2090 h
10 0/-0.012 10 22 75 2 MEXCS2100 h
11 0/-0.012 12 28 75 2 MEXCS2110 h
12 0/-0.012 12 26 80 2 MEXCS2120 h
14 0/-0.030 14 32 90 2 MEXCS2140 h
16 0/-0.030 16 32 90 2 MEXCS2160 h
18 0/-0.030 18 38 100 2 MEXCS2180 h
20 0/-0.030 20 38 100 2 MEXCS2200 h
MEX - 30÷55HRC - Square
534
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
CUTTING PARAMETERS
MEXCS2
SLOTTING
Material
Group
ISO 513
P2 P3 P4 K1 K2 P4 P5 K3 P6 K4 H1 H4 H5
Hardness/Rm < 1000 N/mm² < 35 HRC 35 - 45 HRC 45 - 55 HRC
ap x ae 0.5D x D 0.3D x D 0.2D x D 0.1D x D
Vc (m/min) 70-110 50-90 30-70 20-40
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
128660 0.006 340 22290 0.005 240 15920 0.005 150 9550 0.004 80
214330 0.010 290 11150 0.009 200 7960 0.008 130 4780 0.007 70
39550 0.014 280 7430 0.013 190 5310 0.012 125 3180 0.010 65
47170 0.020 280 5570 0.018 200 3980 0.016 125 2390 0.014 65
55730 0.026 290 4460 0.023 200 3180 0.020 130 1910 0.018 70
64780 0.032 310 3720 0.029 220 2650 0.026 135 1590 0.023 70
83580 0.038 270 2790 0.034 190 1990 0.031 120 1190 0.027 65
10 2870 0.046 260 2230 0.041 180 1590 0.037 115 960 0.032 60
12 2390 0.055 260 1860 0.050 180 1330 0.044 120 800 0.039 60
14 2050 0.064 260 1590 0.057 180 1140 0.051 115 680 0.045 60
16 1790 0.072 260 1390 0.065 180 1000 0.058 115 600 0.051 60
18 1590 0.082 260 1240 0.074 180 880 0.066 115 530 0.058 60
20 1430 0.094 270 1110 0.084 190 800 0.075 120 480 0.065 65
MEX - 30÷55HRC - Square
535
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
h stock standard f non-stock standard m stock exhaustion
MEXCL2
cylindrical shank, 2 flutes, long
OSAWA
NORM
<55
PMKNSH
++ +
+ 1st choice , suitable
SLOTTING
D D Tol. C C Tol. d(h6) l l1 L z EDP No. Stock
10/-0.030 6 8 60 2 MEXCL2010 h
1.5 0/-0.030 6 12 60 2 MEXCL2015 h
20/-0.030 6 12 60 2 MEXCL2020 h
30/-0.030 6 15 60 2 MEXCL2030 h
40/-0.030 6 20 60 2 MEXCL2040 h
50/-0.030 6 25 70 2 MEXCL2050 h
60/-0.030 6 25 70 2 MEXCL2060 h
80/-0.030 8 30 80 2 MEXCL2080 h
10 0/-0.030 10 35 90 2 MEXCL2100 h
12 0/-0.030 12 40 90 2 MEXCL2120 h
MEX - 30÷55HRC - Square
536
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
CUTTING PARAMETERS
MEXCL2
SLOTTING
Material
Group
ISO 513
P2 P3 P4 K1 K2 P4 P5 K3 P6 K4 H1 H4 H5
Hardness/Rm < 1000 N/mm² < 35 HRC 35 - 45 HRC 45 - 55 HRC
ap x ae 0.3D x D 0.3D x D 0.2D x D 0.05D x D
Vc (m/min) 70-110 50-90 30-70 20-40
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
128700 0.005 290 22300 0.005 200 15900 0.004 125 9600 0.004 65
1.5 19100 0.006 230 14900 0.005 160 10600 0.005 100 6400 0.004 55
214300 0.009 260 11100 0.008 180 8000 0.007 115 4800 0.006 60
39600 0.012 230 7400 0.011 160 5300 0.010 100 3200 0.008 55
47200 0.018 260 5600 0.016 180 4000 0.014 115 2400 0.013 60
55700 0.024 270 4500 0.022 190 3200 0.019 125 1900 0.017 65
64800 0.029 280 3700 0.026 190 2700 0.023 125 1600 0.020 65
83600 0.035 250 2800 0.032 180 2000 0.028 110 1200 0.025 60
10 2900 0.041 240 2200 0.037 160 1600 0.033 105 1000 0.029 55
12 2400 0.050 240 1900 0.045 170 1300 0.040 105 800 0.035 55
< D3: ap = 0.4mm max
MEX - 30÷55HRC - Square
537
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
h stock standard f non-stock standard m stock exhaustion
MEXCS4
cylindrical shank, 4 flutes
OSAWA
NORM
<55
PMKNSH
++ +
+ 1st choice , suitable
SIDE MILLING
D D Tol. CR CR Tol. d(h6) l l1 L z EDP No. Stock
10/-0.030 4 3 50 4 MEXCS401050 h
1.5 0/-0.030 4 4.5 50 4 MEXCS401550 h
20/-0.030 4 6 40 4 MEXCS4020 h
2.5 0/-0.030 4 8 40 4 MEXCS4025 h
30/-0.030 6 8 55 4 MEXCS4030 h
3.5 0/-0.030 6 10 55 4 MEXCS4035 h
40/-0.030 6 11 55 4 MEXCS4040 h
4.5 0/-0.030 6 11 55 4 MEXCS4045 h
50/-0.030 6 13 55 4 MEXCS4050 h
5.5 0/-0.030 6 13 55 4 MEXCS4055 h
60/-0.030 6 15 60 4 MEXCS4060 h
6.5 0/-0.030 8 17 65 4 MEXCS4065 h
70/-0.030 8 18 65 4 MEXCS4070 h
80/-0.030 8 20 70 4 MEXCS4080 h
90/-0.030 10 23 70 4 MEXCS4090 h
10 0/-0.030 10 22 75 4 MEXCS4100 h
11 0/-0.030 12 28 75 4 MEXCS4110 h
12 0/-0.030 12 26 80 4 MEXCS4120 h
14 0/-0.030 12 35 90 4 MEXCS4140 h
16 0/-0.030 16 32 100 4 MEXCS4160 h
20 0/-0.030 20 40 100 4 MEXCS4200 h
25 0/-0.030 25 40 100 4 MEXCS4250 h
MEX - 30÷55HRC - Square
538
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
CUTTING PARAMETERS
MEXCS4
SIDE MILLING
Material
Group
ISO 513
P2 P3 P4 K1 K2 P4 P5 K3 P6 K4 H1 H4 H5
Hardness/Rm < 1000 N/mm² < 35 HRC 35 - 45 HRC 45 - 55 HRC
ap x ae D x 0.01D D x 0.01D D x 0.05D D x 0.05D
Vc (m/min) 80-120 50-90 40-60 20-40
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
131850 0.009 1080 22290 0.008 680 15920 0.007 435 9550 0.006 225
215920 0.017 1080 11150 0.015 680 7960 0.014 435 4780 0.012 230
310620 0.026 1080 7430 0.023 680 5310 0.020 435 3180 0.018 225
47960 0.034 1080 5570 0.031 680 3980 0.027 435 2390 0.024 230
56370 0.038 970 4460 0.034 610 3180 0.031 390 1910 0.027 205
65310 0.043 900 3720 0.038 570 2650 0.034 360 1590 0.030 190
83980 0.055 880 2790 0.050 550 1990 0.044 350 1190 0.039 185
10 3180 0.071 900 2230 0.064 570 1590 0.057 360 960 0.050 190
12 2650 0.085 900 1860 0.077 570 1330 0.068 360 800 0.060 190
14 2270 0.098 890 1590 0.088 560 1140 0.078 355 680 0.068 185
16 1990 0.110 880 1390 0.099 550 1000 0.088 350 600 0.077 185
18 1770 0.125 890 1240 0.113 560 880 0.100 350 530 0.088 185
20 1590 0.140 890 1110 0.126 560 800 0.112 360 480 0.098 190
22 1450 0.155 900 1010 0.140 560 720 0.124 355 430 0.109 185
25 1270 0.177 900 890 0.159 570 640 0.142 360 380 0.124 190
MEX - 30÷55HRC - Square
539
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
h stock standard f non-stock standard m stock exhaustion
MEXCL4
cylindrical shank, 4 flutes, long
OSAWA
NORM
<55
*
PMKNSH
++ +
+ 1st choice , suitable
SIDE MILLING
D D Tol. CR CR Tol. d(h6) l l1 L z EDP No. Stock
20/-0.020 6 8 60 4 MEXCL4020 h
30/-0.020 6 15 60 4 MEXCL4030 h
40/-0.020 6 20 60 4 MEXCL4040 h
50/-0.020 6 25 70 4 MEXCL4050 h
60/-0.020 6 25 70 4 MEXCL4060 h
80/-0.020 8 30 80 4 MEXCL4080 h
10 0/-0.020 10 35 90 4 MEXCL4100 h
12 0/-0.020 12 40 90 4 MEXCL4120 h
14 0/-0.020 16 50 110 4 MEXCL4140 h
16 0/-0.020 16 50 110 4 MEXCL4160 h
20 0/-0.020 20 50 110 4 MEXCL4200 h
25 0/-0.050 25 70 130 4 MEXCL4250 h
30/-0.025 6 25 100 4 MEXCL4030100 * h
40/-0.025 6 31 100 4 MEXCL4040100 * h
50/-0.025 6 31 100 4 MEXCL4050100 * h
60/-0.025 6 38 100 4 MEXCL4060100 * h
80/-0.030 8 41 100 4 MEXCL4080100 * h
10 0/-0.030 10 57 125 4 MEXCL4100125 * h
12 0/-0.030 12 75 150 4 MEXCL4120150 * h
14 0/-0.030 14 75 150 4 MEXCL4140150 * h
16 0/-0.030 16 75 150 4 MEXCL4160150 * h
20 0/-0.030 20 75 150 4 MEXCL4200150 * h
MEX - 30÷55HRC - Square
540
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
CUTTING PARAMETERS
MEXCL4
SIDE MILLING
Material
Group
ISO 513
P2 P3 P4 K1 K2 P4 P5 K3 P6 K4 H1 H4 H5
Hardness/Rm < 1000 N/mm² < 35 HRC 35 - 45 HRC 45 - 55 HRC
ap x ae 1.5D x 0.05D 1.5D x 0.05D 1.5D x 0.05D 1.5D x 0.05D
Vc (m/min) 60-100 40-80 20-60 20-40
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
212740 0.014 740 9550 0.013 500 6370 0.012 295 4780 0.010 195
38490 0.022 740 6370 0.020 500 4250 0.017 295 3180 0.015 195
46370 0.029 740 4780 0.026 500 3180 0.023 295 2390 0.020 195
55100 0.033 660 3820 0.029 450 2550 0.026 265 1910 0.023 175
64250 0.036 610 3180 0.033 410 2120 0.029 245 1590 0.025 160
83180 0.047 600 2390 0.042 400 1590 0.038 240 1190 0.033 155
10 2550 0.060 620 1910 0.054 410 1270 0.048 245 960 0.042 160
12 2120 0.072 610 1590 0.065 410 1060 0.058 245 800 0.051 160
14 1820 0.083 600 1360 0.075 410 910 0.066 240 680 0.058 160
16 1590 0.094 590 1190 0.084 400 800 0.075 240 600 0.065 155
20 1270 0.119 600 960 0.107 410 640 0.095 245 480 0.083 160
25 1020 0.150 610 760 0.135 410 510 0.120 245 380 0.105 160
MEX - 30÷55HRC - Square
541
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
h stock standard f non-stock standard m stock exhaustion
MEXCSHM
cylindrical shank, multi flute
OSAWA
NORM
<55
PMKNSH
++ +
+ 1st choice , suitable
SIDE MILLING
D D Tol. CR CR Tol. d(h6) l l1 L z EDP No. Stock
30/-0.025 6 8 50 6 MEXCSHM030 h
40/-0.025 6 11 50 6 MEXCSHM040 h
50/-0.025 6 13 50 6 MEXCSHM050 h
60/-0.030 6 15 60 6 MEXCSHM060 h
80/-0.030 8 20 70 6 MEXCSHM080 h
10 0/-0.030 10 25 80 6 MEXCSHM100 h
12 0/-0.030 12 30 80 6 MEXCSHM120 h
14 0/-0.030 14 30 90 6 MEXCSHM140 h
16 0/-0.030 16 40 100 6 MEXCSHM160 h
18 0/-0.030 18 35 100 8 MEXCSHM180 h
20 0/-0.030 20 50 100 8 MEXCSHM200 h
MEX - 30÷55HRC - Square
542
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
CUTTING PARAMETERS
MEXCSHM
SIDE MILLING
Material
Group
ISO 513
P2 P3 P4 K1 K2 P4 P5 K3 P6 K4 H1 H4 H5
Hardness/Rm < 1000 N/mm² < 35 HRC 35 - 45 HRC 45 - 55 HRC
ap x ae 1.5D x 0.1D 1.5D x 0.1D 1.5D x 0.05D 1.5D x 0.05D
Vc (m/min) 120-160 90-130 60-100 50-70
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
314860 0.008 750 11680 0.008 530 8490 0.007 340 6370 0.006 220
411150 0.012 800 8760 0.011 570 6370 0.010 370 4780 0.008 240
58920 0.014 770 7010 0.013 550 5100 0.012 350 3820 0.010 230
67430 0.018 800 5840 0.016 570 4250 0.014 370 3180 0.013 240
85570 0.028 920 4380 0.025 650 3180 0.022 420 2390 0.019 280
10 4460 0.034 900 3500 0.030 640 2550 0.027 410 1910 0.024 270
12 3720 0.041 910 2920 0.037 640 2120 0.033 420 1590 0.029 270
14 3180 0.048 920 2500 0.043 650 1820 0.038 420 1360 0.034 270
16 2790 0.056 940 2190 0.051 670 1590 0.045 430 1190 0.039 280
18 2480 0.065 970 1950 0.059 680 1420 0.052 440 1060 0.046 290
20 2230 0.073 1300 1750 0.066 920 1270 0.058 590 960 0.051 390
MEX - 30÷55HRC - Square
543
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
h stock standard f non-stock standard m stock exhaustion
MEXCLHM
cylindrical shank, multi flute, long
OSAWA
NORM
<55
PMKNSH
++ +
+ 1st choice , suitable
SIDE MILLING
D D Tol. CR CR Tol. d(h6) l l1 L z EDP No. Stock
30/-0.025 6 19 75 6 MEXCLHM030 h
40/-0.025 6 19 75 6 MEXCLHM040 h
50/-0.025 6 19 75 6 MEXCLHM050 h
60/-0.030 6 25 80 6 MEXCLHM060 h
80/-0.030 8 40 100 6 MEXCLHM080 h
10 0/-0.030 10 45 120 6 MEXCLHM100 h
12 0/-0.030 12 60 120 6 MEXCLHM120 h
16 0/-0.030 16 80 150 6 MEXCLHM160 h
20 0/-0.030 20 80 150 8 MEXCLHM200 h
MEX - 30÷55HRC - Square
544
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
CUTTING PARAMETERS
MEXCLHM
SIDE MILLING
Material
Group
ISO 513
P2 P3 P4 K1 K2 P4 P5 K3 P6 K4 H1 H4 H5
Hardness/Rm < 1000 N/mm² < 35 HRC 35 - 45 HRC 45 - 55 HRC
ap x ae 1.5D x 0.05D 1.5D x 0.05D 1.5D x 0.05D 1.5D x 0.05D
Vc (m/min) 80-120 50-90 40-60 20-40
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
310620 0.007 450 7430 0.006 290 5310 0.006 180 3180 0.005 100
47960 0.010 490 5570 0.009 310 3980 0.008 190 2390 0.007 100
56370 0.012 470 4460 0.011 290 3180 0.010 190 1910 0.009 100
65310 0.015 490 3720 0.014 310 2650 0.012 190 1590 0.011 100
83980 0.023 560 2790 0.021 350 1990 0.019 220 1190 0.016 120
10 3180 0.029 540 2230 0.026 340 1590 0.023 220 960 0.020 120
12 2650 0.035 550 1860 0.031 350 1330 0.028 220 800 0.024 120
14 2270 0.041 560 1590 0.037 350 1140 0.033 220 680 0.029 120
16 1990 0.048 570 1390 0.043 360 1000 0.038 230 600 0.034 120
18 1770 0.055 580 1240 0.050 370 880 0.044 230 530 0.039 120
20 1590 0.063 800 1110 0.057 500 800 0.050 320 480 0.044 170
MEX - 30÷55HRC - 45° chamfer
545
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
MEXCSFR
cylindrical shank, roughing
OSAWA
NORM
<55
PMKNSH
++ +
+ 1st choice , suitable
SLOTTING
SIDE MILLING
D D Tol. CR CR Tol. d(h6) l l1 L z EDP No. Stock
60/-0.048 0.40 +/-0.020 6 15 60 3 MEXCSFR060 h
80/-0.058 0.40 +/-0.020 8 20 65 3 MEXCSFR080 h
10 0/-0.058 0.50 +/-0.020 10 25 70 4 MEXCSFR100 h
12 0/-0.070 0.50 +/-0.020 12 30 80 4 MEXCSFR120 h
14 0/-0.070 0.50 +/-0.020 14 25 100 4 MEXCSFR140 h
16 0/-0.070 0.50 +/-0.020 16 40 100 4 MEXCSFR160 h
20 0/-0.084 0.50 +/-0.020 20 50 100 4 MEXCSFR200 h
MEX - 30÷55HRC - 45° chamfer
546
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
CUTTING PARAMETERS
MEXCSFR
SLOTTING
Material
Group
ISO 513
P2 P3 P4 K1 K2 P4 P5 K3 P6 K4 H1 H4 H5
Hardness/Rm < 1000 N/mm² < 35 HRC 35 - 45 HRC 45 - 55 HRC
ap x ae 0.5D x D 0.5D x D 0.3D x D 0.1D x D
Vc (m/min) 70-90 50-70 40-60 20-40
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
64250 0.043 720 3180 0.038 490 2650 0.034 360 1590 0.030 190
83180 0.055 700 2390 0.050 480 1990 0.044 350 1190 0.039 185
10 2550 0.071 720 1910 0.064 490 1590 0.057 360 960 0.050 190
12 2120 0.085 720 1590 0.077 490 1330 0.068 360 800 0.060 190
14 1820 0.098 710 1360 0.088 480 1140 0.078 355 680 0.068 185
16 1590 0.110 700 1190 0.099 470 1000 0.088 350 600 0.077 185
20 1270 0.140 710 960 0.126 480 800 0.112 360 480 0.098 190
D6-8: Z=3
SIDE MILLING
Hardness/Rm < 1000 N/mm² < 35 HRC 35 - 45 HRC 45 - 55 HRC
ap x ae 1.5D x 0.3D 1.5D x 0.3D D x 0.1D D x 0.05D
Vc (m/min) 80-100 60-80 50-70 30-50
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
64250 0.047 790 3180 0.042 540 2650 0.037 395 1590 0.033 210
83180 0.061 770 2390 0.055 520 1990 0.049 385 1190 0.043 205
10 2550 0.078 800 1910 0.070 540 1590 0.062 395 960 0.055 210
12 2120 0.094 790 1590 0.084 540 1330 0.075 400 800 0.065 210
14 1820 0.108 780 1360 0.097 530 1140 0.086 390 680 0.075 205
16 1590 0.121 770 1190 0.109 520 1000 0.097 385 600 0.085 205
20 1270 0.154 780 960 0.139 530 800 0.123 395 480 0.108 205
D6-8: Z=3
MEX - 30÷55HRC - Corner radius
547
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
h stock standard f non-stock standard m stock exhaustion
MEXLN2R
cylindrical shank, 2 flutes, extended and reduced
neck, corner radius
OSAWA
NORM
<55
PMKNSH
++ +
+ 1st choice , suitable
SQUARE RIB
D D Tol. CR CR Tol. d(h6) l l1 d1 L z 30’ 1° 1°30’ 2° 3° EDP No. Stock
0.3 0/-0.020 0.05 +/-0.010 4 0.4 1 0.26 50 2 1.08 1.12 1.15 1.19 1.25 MEXLN20030001 h
0.3 0/-0.020 0.05 +/-0.010 4 0.4 1.5 0.26 50 2 1.60 1.65 1.70 1.75 1.85 MEXLN20030065 h
0.3 0/-0.020 0.05 +/-0.010 4 0.4 2 0.26 50 2 2.12 2.19 2.25 2.32 2.46 MEXLN20030002 h
0.3 0/-0.020 0.05 +/-0.010 4 0.4 3 0.26 50 2 3.15 3.25 3.35 3.46 3.66 MEXLN20030003 h
0.3 0/-0.020 0.10 +/-0.010 4 0.4 1 0.26 50 2 1.08 1.12 1.15 1.18 1.24 MEXLN20030101 h
0.3 0/-0.020 0.10 +/-0.010 4 0.4 1.5 0.26 50 2 1.60 1.65 1.70 1.75 1.84 MEXLN20030165 h
0.3 0/-0.020 0.10 +/-0.010 4 0.4 2 0.26 50 2 2.12 2.18 2.25 2.31 2.45 MEXLN20030102 h
0.3 0/-0.020 0.10 +/-0.010 4 0.4 3 0.26 50 2 3.15 3.25 3.35 3.45 3.65 MEXLN20030103 h
0.4 0/-0.020 0.05 +/-0.010 4 0.6 1 0.37 50 2 1.08 1.12 1.15 1.19 1.25 MEXLN20040001 h
0.4 0/-0.020 0.05 +/-0.010 4 0.6 2 0.37 50 2 2.12 2.19 2.25 2.32 2.46 MEXLN20040006 h
0.4 0/-0.020 0.05 +/-0.010 4 0.6 3 0.37 50 2 3.15 3.25 3.35 3.46 3.66 MEXLN20040003 h
0.4 0/-0.020 0.05 +/-0.010 4 0.6 4 0.37 50 2 4.19 4.32 4.46 4.59 4.86 MEXLN20040004 h
0.4 0/-0.020 0.10 +/-0.010 4 0.6 1 0.37 50 2 1.08 1.12 1.15 1.18 1.24 MEXLN20040101 h
0.4 0/-0.020 0.10 +/-0.010 4 0.6 2 0.37 50 2 2.12 2.18 2.25 2.31 2.45 MEXLN20040102 h
0.4 0/-0.020 0.10 +/-0.010 4 0.6 3 0.37 50 2 3.15 3.25 3.35 3.45 3.65 MEXLN20040103 h
0.4 0/-0.020 0.10 +/-0.010 4 0.6 4 0.37 50 2 4.18 4.32 4.45 4.58 4.85 MEXLN20040104 h
0.5 0/-0.020 0.05 +/-0.010 4 0.7 2 0.45 50 2 2.16 2.23 2.29 2.36 2.50 MEXLN20050002 h
0.5 0/-0.020 0.05 +/-0.010 4 0.7 4 0.45 50 2 4.22 4.36 4.50 4.63 4.90 MEXLN20050004 h
0.5 0/-0.020 0.05 +/-0.010 4 0.7 6 0.45 50 2 6.29 6.49 6.70 6.90 7.31 MEXLN20050006 h
0.5 0/-0.020 0.10 +/-0.010 4 0.7 2 0.45 50 2 2.16 2.22 2.29 2.36 2.49 MEXLN20050102 h
0.5 0/-0.020 0.10 +/-0.010 4 0.7 4 0.45 50 2 4.22 4.36 4.49 4.63 4.89 MEXLN20050104 h
0.5 0/-0.020 0.10 +/-0.010 4 0.7 6 0.45 50 2 6.29 6.49 6.69 6.89 7.30 MEXLN20050106 h
0.6 0/-0.020 0.10 +/-0.010 4 0.9 2 0.55 50 2 2.16 2.22 2.29 2.36 2.49 MEXLN20060102 h
0.6 0/-0.020 0.10 +/-0.010 4 0.9 4 0.55 50 2 4.22 4.36 4.49 4.63 4.89 MEXLN20060104 h
0.6 0/-0.020 0.10 +/-0.010 4 0.9 6 0.55 50 2 6.29 6.49 6.69 6.89 7.30 MEXLN20060106 h
0.7 0/-0.020 0.10 +/-0.010 4 1.0 4 0.65 50 2 4.22 4.36 4.49 4.63 4.89 MEXLN20070104 h
0.7 0/-0.020 0.10 +/-0.010 4 1.0 6 0.65 50 2 6.29 6.49 6.69 6.89 7.30 MEXLN20070106 h
0.8 0/-0.020 0.05 +/-0.010 4 1.2 4 0.75 50 2 4.22 4.36 4.50 4.63 4.90 MEXLN20080004 h
0.8 0/-0.020 0.05 +/-0.010 4 1.2 6 0.75 50 2 6.29 6.49 6.70 6.90 7.31 MEXLN20080006 h
0.8 0/-0.020 0.05 +/-0.010 4 1.2 8 0.75 50 2 8.36 8.63 8.90 9.17 9.71 MEXLN20080008 h
0.8 0/-0.020 0.10 +/-0.010 4 1.2 4 0.75 50 2 4.22 4.36 4.49 4.63 4.89 MEXLN20080104 h
0.8 0/-0.020 0.10 +/-0.010 4 1.2 6 0.75 50 2 6.29 6.49 6.69 6.89 7.30 MEXLN20080106 h
0.8 0/-0.020 0.10 +/-0.010 4 1.2 8 0.75 50 2 8.36 8.63 8.89 9.16 9.70 MEXLN20080108 h
0.9 0/-0.020 0.10 +/-0.010 4 1.4 8 0.85 50 2 8.36 8.63 8.89 9.16 9.70 MEXLN20090108 h
0.9 0/-0.020 0.10 +/-0.010 4 1.4 15 0.85 50 2 15.59 16.1 16.6 17.11 18.12 MEXLN20090115 h
10/-0.020 0.10 +/-0.010 4 1.5 4 0.95 50 2 4.32 4.46 4.59 4.73 5.01 MEXLN20100104 h
10/-0.020 0.10 +/-0.010 4 1.5 6 0.95 50 2 6.39 6.59 6.80 7.00 7.41 MEXLN20100106 h
10/-0.020 0.10 +/-0.010 4 1.5 8 0.95 50 2 8.45 8.73 9.00 9.27 9.81 MEXLN20100108 h
10/-0.020 0.10 +/-0.010 4 1.5 10 0.95 50 2 10.52 10.86 11.20 11.54 12.22 MEXLN20100110 h
CR CR
α
actual length
actual length according to _ angle
MEX - 30÷55HRC - Corner radius
548
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
D D Tol. CR CR Tol. d(h6) l l1 d1 L z 30’ 1° 1°30’ 2° 3° EDP No. Stock
10/-0.020 0.10 +/-0.010 4 1.5 12 0.95 50 2 12.59 12.99 13.40 13.81 14.62 MEXLN20100112 h
10/-0.020 0.10 +/-0.010 4 1.5 16 0.95 50 2 16.72 17.26 17.80 18.35 19.43 MEXLN20100116 h
10/-0.020 0.10 +/-0.010 4 1.5 20 0.95 50 2 20.86 21.53 22.21 22.88 24.24 MEXLN20100120 h
10/-0.020 0.20 +/-0.010 4 1.5 4 0.95 50 2 4.32 4.45 4.58 4.72 4.99 MEXLN20100204 h
10/-0.020 0.20 +/-0.010 4 1.5 6 0.95 50 2 6.38 6.58 6.79 6.99 7.39 MEXLN20100206 h
10/-0.020 0.20 +/-0.010 4 1.5 8 0.95 50 2 8.45 8.72 8.99 9.26 9.79 MEXLN20100208 h
10/-0.020 0.20 +/-0.010 4 1.5 10 0.95 50 2 10.52 10.85 11.19 11.52 12.20 MEXLN20100210 h
10/-0.020 0.20 +/-0.010 4 1.5 12 0.95 50 2 12.58 12.99 13.39 13.79 14.60 MEXLN20100212 h
10/-0.020 0.20 +/-0.010 4 1.5 16 0.95 50 2 16.72 17.26 17.79 18.33 19.41 MEXLN20100216 h
10/-0.020 0.20 +/-0.010 4 1.5 20 0.95 50 2 20.85 21.53 22.20 22.87 24.22 MEXLN20100220 h
10/-0.020 0.30 +/-0.010 4 1.5 6 0.95 50 2 6.38 6.58 6.78 6.97 7.37 MEXLN20100306 h
10/-0.020 0.30 +/-0.010 4 1.5 10 0.95 50 2 10.51 10.85 11.18 11.51 12.18 MEXLN20100310 h
10/-0.020 0.30 +/-0.010 4 1.5 16 0.95 50 2 16.72 17.25 17.78 18.32 19.39 MEXLN20100316 h
10/-0.020 0.30 +/-0.010 4 1.5 20 0.95 50 2 20.85 21.52 22.19 22.86 24.20 MEXLN20100320 h
1.2 0/-0.020 0.10 +/-0.010 4 1.8 6 1.15 50 2 6.39 6.59 6.80 7.00 7.41 MEXLN20120106 h
1.2 0/-0.020 0.10 +/-0.010 4 1.8 8 1.15 50 2 8.45 8.73 9.00 9.27 9.81 MEXLN20120108 h
1.2 0/-0.020 0.10 +/-0.010 4 1.8 10 1.15 50 2 10.52 10.86 11.20 11.54 12.22 MEXLN20120110 h
1.2 0/-0.020 0.10 +/-0.010 4 1.8 12 1.15 50 2 12.59 12.99 13.40 13.81 14.62 MEXLN20120112 h
1.4 0/-0.020 0.10 +/-0.010 4 2.1 6 1.35 50 2 6.39 6.59 6.80 7.00 7.41 MEXLN20140106 h
1.4 0/-0.020 0.10 +/-0.010 4 2.1 8 1.35 50 2 8.45 8.73 9.00 9.27 9.81 MEXLN20140108 h
1.4 0/-0.020 0.10 +/-0.010 4 2.1 10 1.35 50 2 10.52 10.86 11.20 11.54 12.22 MEXLN20140110 h
1.4 0/-0.020 0.10 +/-0.010 4 2.1 12 1.35 50 2 12.59 12.99 13.40 13.81 14.62 MEXLN20140112 h
1.4 0/-0.020 0.10 +/-0.010 4 2.1 16 1.35 50 2 16.72 17.26 17.80 18.35 19.43 MEXLN20140116 h
1.5 0/-0.020 0.10 +/-0.010 4 2.3 4 1.45 50 2 4.32 4.46 4.59 4.73 5.01 MEXLN20150104 h
1.5 0/-0.020 0.10 +/-0.010 4 2.3 8 1.45 50 2 8.45 8.73 9.00 9.27 9.81 MEXLN20150108 h
1.5 0/-0.020 0.10 +/-0.010 4 2.3 12 1.45 50 2 12.59 12.99 13.40 13.81 14.62 MEXLN20150112 h
1.5 0/-0.020 0.10 +/-0.010 4 2.3 16 1.45 50 2 16.72 17.26 17.80 18.35 19.43 MEXLN20150116 h
1.5 0/-0.020 0.10 +/-0.010 4 2.3 20 1.45 60 2 20.86 21.53 22.21 22.88 24.24 MEXLN20150120 h
1.5 0/-0.020 0.20 +/-0.010 4 2.3 8 1.45 50 2 8.45 8.72 8.99 9.26 9.79 MEXLN20150208 h
1.5 0/-0.020 0.20 +/-0.010 4 2.3 10 1.45 50 2 10.52 10.85 11.19 11.52 12.20 MEXLN20150210 h
1.5 0/-0.020 0.20 +/-0.010 4 2.3 12 1.45 50 2 12.58 12.99 13.39 13.79 14.60 MEXLN20150212 h
1.5 0/-0.020 0.20 +/-0.010 4 2.3 16 1.45 50 2 16.72 17.26 17.79 18.33 19.41 MEXLN20150216 h
1.5 0/-0.020 0.20 +/-0.010 4 2.3 20 1.45 60 2 20.85 21.53 22.20 22.87 24.22 MEXLN20150220 h
1.5 0/-0.020 0.30 +/-0.010 4 2.3 8 1.45 50 2 8.45 8.71 8.98 9.24 9.77 MEXLN20150308 h
1.5 0/-0.020 0.30 +/-0.010 4 2.3 16 1.45 50 2 16.72 17.25 17.78 18.32 19.39 MEXLN20150316 h
1.5 0/-0.020 0.30 +/-0.010 4 2.3 20 1.45 60 2 20.85 21.52 22.19 22.86 24.20 MEXLN20150320 h
1.6 0/-0.020 0.10 +/-0.010 4 2.4 8 1.55 50 2 8.45 8.73 9.00 9.27 9.81 MEXLN20160108 h
1.6 0/-0.020 0.10 +/-0.010 4 2.4 12 1.55 50 2 12.59 12.99 13.40 13.81 14.62 MEXLN20160112 h
1.6 0/-0.020 0.10 +/-0.010 4 2.4 16 1.55 50 2 16.72 17.26 17.80 18.35 19.43 MEXLN20160116 h
h stock standard f non-stock standard m stock exhaustion
MEXLN2R
cylindrical shank, 2 flutes, extended and reduced
neck, corner radius
OSAWA
NORM
<55
PMKNSH
++ +
+ 1st choice , suitable
SQUARE RIB
CR CR
α
actual length
actual length according to _ angle
MEX - 30÷55HRC - Corner radius
549
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
D D Tol. CR CR Tol. d(h6) l l1 d1 L z 30’ 1° 1°30’ 2° 3° EDP No. Stock
1.8 0/-0.020 0.20 +/-0.010 4 2.7 8 1.75 50 2 8.45 8.72 8.99 9.26 9.79 MEXLN20180208 h
1.8 0/-0.020 0.20 +/-0.010 4 2.7 12 1.75 50 2 12.58 12.99 13.39 13.79 14.60 MEXLN20180212 h
1.8 0/-0.020 0.20 +/-0.010 4 2.7 16 1.75 50 2 16.72 17.26 17.79 18.33 19.41 MEXLN20180216 h
20/-0.020 0.20 +/-0.010 4 3 6 1.95 50 2 6.38 6.58 6.79 6.99 7.39 MEXLN20200206 h
20/-0.020 0.20 +/-0.010 4 3 8 1.95 50 2 8.45 8.72 8.99 9.26 9.79 MEXLN20200208 h
20/-0.020 0.20 +/-0.010 4 3 10 1.95 50 2 10.52 10.85 11.19 11.52 12.20 MEXLN20200210 h
20/-0.020 0.20 +/-0.010 4 3 12 1.95 50 2 12.58 12.99 13.39 13.79 14.60 MEXLN20200212 h
20/-0.020 0.20 +/-0.010 4 3 14 1.95 50 2 14.65 15.12 15.59 16.06 17.01 MEXLN20200214 h
20/-0.020 0.20 +/-0.010 4 3 16 1.95 50 2 16.72 17.26 17.79 18.33 19.41 MEXLN20200216 h
20/-0.020 0.20 +/-0.010 4 3 20 1.95 60 2 20.85 21.53 22.20 22.87 - MEXLN20200220 h
20/-0.020 0.20 +/-0.010 4 3 25 1.95 75 2 26.02 26.86 27.70 28.54 - MEXLN20200225 h
20/-0.020 0.20 +/-0.010 4 3 30 1.95 75 2 31.19 32.20 33.21 - - MEXLN20200230 h
20/-0.020 0.50 +/-0.010 4 3 6 1.95 50 2 6.37 6.56 6.75 6.95 7.33 MEXLN20200506 h
20/-0.020 0.50 +/-0.010 4 3 8 1.95 50 2 8.44 8.70 8.96 9.22 9.73 MEXLN20200508 h
20/-0.020 0.50 +/-0.010 4 3 12 1.95 50 2 12.57 12.97 13.36 13.75 14.54 MEXLN20200512 h
20/-0.020 0.50 +/-0.010 4 3 16 1.95 50 2 16.71 17.24 17.76 18.29 19.35 MEXLN20200516 h
20/-0.020 0.50 +/-0.010 4 3 20 1.95 60 2 20.84 21.51 22.17 22.83 - MEXLN20200520 h
20/-0.020 0.50 +/-0.010 4 3 25 1.95 75 2 26.01 26.84 27.67 28.50 - MEXLN20200525 h
20/-0.020 0.50 +/-0.010 4 3 30 1.95 75 2 31.18 32.18 33.18 - - MEXLN20200530 h
2.5 0/-0.020 0.30 +/-0.010 4 3.7 8 2.40 50 2 8.45 8.71 8.98 9.24 9.77 MEXLN20250308 h
2.5 0/-0.020 0.30 +/-0.010 4 3.7 12 2.40 50 2 12.58 12.98 13.38 13.78 14.58 MEXLN20250312 h
2.5 0/-0.020 0.30 +/-0.010 4 3.7 16 2.40 50 2 16.72 17.25 17.78 18.32 - MEXLN20250316 h
2.5 0/-0.020 0.30 +/-0.010 4 3.7 20 2.40 60 2 20.85 21.52 22.19 - - MEXLN20250320 h
2.5 0/-0.020 0.30 +/-0.010 4 3.7 25 2.40 60 2 26.02 26.86 27.69 - - MEXLN20250325 h
2.5 0/-0.020 0.30 +/-0.010 4 3.7 30 2.40 75 2 31.19 32.19 - - - MEXLN20250330 h
2.5 0/-0.020 0.50 +/-0.010 4 3.7 8 2.40 50 2 8.44 8.70 8.96 9.22 9.73 MEXLN20250508 h
2.5 0/-0.020 0.50 +/-0.010 4 3.7 12 2.40 50 2 12.57 12.97 13.36 13.75 14.54 MEXLN20250512 h
2.5 0/-0.020 0.50 +/-0.010 4 3.7 16 2.40 50 2 16.71 17.24 17.76 18.29 - MEXLN20250516 h
2.5 0/-0.020 0.50 +/-0.010 4 3.7 20 2.40 60 2 20.84 21.51 22.17 - - MEXLN20250520 h
2.5 0/-0.020 0.50 +/-0.010 4 3.7 25 2.40 60 2 26.01 26.84 27.67 - - MEXLN20250525 h
2.5 0/-0.020 0.50 +/-0.010 4 3.7 30 2.40 75 2 31.18 32.18 - - - MEXLN20250530 h
30/-0.025 0.20 +/-0.010 6 4.5 10 2.85 50 2 10.71 11.05 11.39 11.74 12.42 MEXLN20300210 h
30/-0.025 0.20 +/-0.010 6 4.5 12 2.85 50 2 12.78 13.19 13.60 14.00 14.82 MEXLN20300212 h
30/-0.025 0.20 +/-0.010 6 4.5 16 2.85 60 2 16.91 17.46 18.00 18.54 19.63 MEXLN20300216 h
30/-0.025 0.20 +/-0.010 6 4.5 20 2.85 60 2 21.05 21.72 22.40 23.08 24.44 MEXLN20300220 h
30/-0.025 0.20 +/-0.010 6 4.5 25 2.85 75 2 26.21 27.06 27.91 28.75 30.45 MEXLN20300225 h
30/-0.025 0.30 +/-0.010 6 4.5 10 2.85 50 2 10.71 11.04 11.38 11.72 12.40 MEXLN20300310 h
30/-0.025 0.30 +/-0.010 6 4.5 12 2.85 50 2 12.77 13.18 13.59 13.99 14.80 MEXLN20300312 h
30/-0.025 0.30 +/-0.010 6 4.5 16 2.85 60 2 16.91 17.45 17.99 18.53 19.61 MEXLN20300316 h
h stock standard f non-stock standard m stock exhaustion
MEXLN2R
cylindrical shank, 2 flutes, extended and reduced
neck, corner radius
OSAWA
NORM
<55
PMKNSH
++ +
+ 1st choice , suitable
SQUARE RIB
CR CR
α
actual length
actual length according to _ angle
MEX - 30÷55HRC - Corner radius
550
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
D D Tol. CR CR Tol. d(h6) l l1 d1 L z 30’ 1° 1°30’ 2° 3° EDP No. Stock
30/-0.025 0.30 +/-0.010 6 4.5 20 2.85 60 2 21.04 21.72 22.39 23.07 24.42 MEXLN20300320 h
30/-0.025 0.30 +/-0.010 6 4.5 25 2.85 75 2 26.21 27.05 27.90 28.74 30.43 MEXLN20300325 h
30/-0.025 0.50 +/-0.010 6 4.5 10 2.85 50 2 10.70 11.03 11.36 11.70 12.36 MEXLN20300510 h
30/-0.025 0.50 +/-0.010 6 4.5 12 2.85 50 2 12.77 13.17 13.57 13.96 14.76 MEXLN20300512 h
30/-0.025 0.50 +/-0.010 6 4.5 16 2.85 60 2 16.90 17.44 17.97 18.50 19.57 MEXLN20300516 h
30/-0.025 0.50 +/-0.010 6 4.5 20 2.85 60 2 21.04 21.70 22.37 23.04 24.38 MEXLN20300520 h
30/-0.025 0.50 +/-0.010 6 4.5 25 2.85 75 2 26.20 27.04 27.88 28.71 30.39 MEXLN20300525 h
40/-0.025 0.30 +/-0.010 6 4.5 10 3.85 60 2 10.90 11.24 11.59 11.93 12.62 MEXLN20400310 h
40/-0.025 0.30 +/-0.010 6 4.5 15 3.85 60 2 16.07 16.58 17.09 17.61 18.63 MEXLN20400315 h
40/-0.025 0.30 +/-0.010 6 4.5 20 3.85 60 2 21.24 21.92 22.60 23.28 - MEXLN20400320 h
40/-0.025 0.30 +/-0.010 6 4.5 25 3.85 75 2 26.40 27.25 28.10 28.95 - MEXLN20400325 h
40/-0.025 0.30 +/-0.010 6 4.5 30 3.85 75 2 31.57 32.59 33.61 - - MEXLN20400330 h
40/-0.025 0.30 +/-0.010 6 4.5 40 3.85 75 2 41.91 43.26 - - - MEXLN20400340 h
40/-0.025 0.50 +/-0.010 6 4.5 10 3.85 60 2 10.89 11.23 11.57 11.91 12.58 MEXLN20400510 h
40/-0.025 0.50 +/-0.010 6 4.5 15 3.85 60 2 16.06 16.57 17.07 17.58 18.59 MEXLN20400515 h
40/-0.025 0.50 +/-0.010 6 4.5 20 3.85 60 2 21.23 21.90 22.58 23.25 - MEXLN20400520 h
40/-0.025 0.50 +/-0.010 6 4.5 25 3.85 75 2 26.40 27.24 28.08 28.92 - MEXLN20400525 h
40/-0.025 0.50 +/-0.010 6 4.5 30 3.85 75 2 31.57 32.58 33.59 - - MEXLN20400530 h
40/-0.025 0.50 +/-0.010 6 4.5 40 3.85 75 2 41.9 43.25 - - - MEXLN20400540 h
h stock standard f non-stock standard m stock exhaustion
MEXLN2R
cylindrical shank, 2 flutes, extended and reduced
neck, corner radius
OSAWA
NORM
<55
PMKNSH
++ +
+ 1st choice , suitable
SQUARE RIB
CR CR
α
actual length
actual length according to _ angle
MEX - 30÷55HRC - Corner radius
551
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
CUTTING PARAMETERS
MEXLN2R
SQUARE RIB
Material Group
ISO 513 P2 P3 P4 K1 K2 P4 P5 K3 P6 K4 H1 H4 H5
Hardness/Rm < 1000 N/mm² < 35 HRC 35 - 45 HRC 45 - 55 HRC
ap x ae ap x D ap x D ap x D ap x D
Vc (m/min) 70-110 50-90 30-70 20-40
D
(mm)
l1
(mm)
ap
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
0.3
≤ 6D 0.02 40000 0.004 320 40000 0.004 290 40000 0.003 255 31800 0.003 180
≤ 8D 0.01 40000 0.004 290 40000 0.003 260 40000 0.003 230 28700 0.003 145
≤ 10D 0.01 40000 0.003 260 40000 0.003 230 40000 0.003 205 25500 0.002 115
≤ 12D 0.01 40000 0.003 220 40000 0.003 200 37200 0.002 165 22300 0.002 85
0.4
≤ 6D 0.02 40000 0.006 480 40000 0.005 430 39800 0.005 380 23900 0.004 200
≤ 8D 0.02 40000 0.005 430 40000 0.005 390 35800 0.004 310 21500 0.004 165
≤ 10D 0.01 40000 0.005 380 40000 0.004 350 31800 0.004 245 19100 0.003 130
≤ 12D 0.01 40000 0.004 340 39000 0.004 290 27900 0.003 185 16700 0.003 100
0.5
≤ 6D 0.03 40000 0.007 560 40000 0.006 500 31800 0.006 355 19100 0.005 185
≤ 8D 0.02 40000 0.006 500 40000 0.006 450 28700 0.005 290 17200 0.004 150
≤ 10D 0.02 40000 0.006 450 35700 0.005 360 25500 0.004 230 15300 0.004 120
≤ 12D 0.01 40000 0.005 390 31200 0.004 280 22300 0.004 175 13400 0.003 90
0.6
≤ 6D 0.03 40000 0.008 640 37200 0.007 540 26500 0.006 340 15900 0.006 180
≤ 8D 0.03 40000 0.007 580 33400 0.006 430 23900 0.006 275 14300 0.005 145
≤ 10D 0.02 38200 0.006 490 29700 0.006 340 21200 0.005 215 12700 0.004 115
≤ 12D 0.02 33400 0.006 370 26000 0.005 260 18600 0.004 165 11100 0.004 85
0.8
≤ 6D 0.04 35800 0.010 720 27900 0.009 500 19900 0.008 320 11900 0.007 165
≤ 8D 0.03 32200 0.009 580 25100 0.008 410 17900 0.007 260 10700 0.006 135
≤ 10D 0.03 28700 0.008 460 22300 0.007 320 15900 0.006 205 9600 0.006 110
≤ 12D 0.02 25100 0.007 350 19500 0.006 250 13900 0.006 155 8400 0.005 80
1
≤ 6D 0.05 28700 0.012 690 22300 0.011 480 15900 0.010 305 9600 0.008 160
≤ 8D 0.04 25800 0.011 560 20100 0.010 390 14300 0.009 245 8600 0.008 130
≤ 10D 0.04 22900 0.010 440 17800 0.009 310 12700 0.008 195 7600 0.007 100
≤ 12D 0.03 20100 0.008 340 15600 0.008 240 11100 0.007 150 6700 0.006 80
1.2
≤ 6D 0.06 23900 0.022 1050 18600 0.020 740 13300 0.018 470 8000 0.015 245
≤ 8D 0.05 21500 0.020 850 16700 0.018 600 11900 0.016 375 7200 0.014 200
≤ 10D 0.04 19100 0.018 670 14900 0.016 470 10600 0.014 300 6400 0.012 160
≤ 12D 0.03 16700 0.015 510 13000 0.014 360 9300 0.012 230 5600 0.011 120
1.4
≤ 6D 0.07 20500 0.024 980 15900 0.022 690 11400 0.019 440 6800 0.017 230
≤ 8D 0.06 18400 0.022 790 14300 0.019 560 10200 0.017 355 6100 0.015 185
≤ 10D 0.05 16400 0.019 630 12700 0.017 440 9100 0.015 280 5500 0.013 150
≤ 12D 0.04 14300 0.017 480 11100 0.015 340 8000 0.013 215 4800 0.012 115
≤ 15D 0.03 12300 0.014 350 9600 0.013 250 6800 0.012 155 4100 0.010 85
> 15D 0.02 10200 0.012 240 8000 0.011 170 5700 0.010 110 3400 0.008 55
1.5
≤ 6D 0.08 19100 0.025 960 14900 0.023 670 10600 0.020 425 6400 0.018 225
≤ 8D 0.06 17200 0.023 770 13400 0.020 540 9600 0.018 345 5700 0.016 180
≤ 10D 0.05 15300 0.020 610 11900 0.018 430 8500 0.016 270 5100 0.014 145
≤ 12D 0.04 13400 0.018 470 10400 0.016 330 7400 0.014 205 4500 0.012 110
≤ 15D 0.03 11500 0.015 350 8900 0.014 240 6400 0.012 155 3800 0.011 80
> 15D 0.02 9600 0.013 240 7400 0.011 170 5300 0.010 105 3200 0.009 55
1.6
≤ 6D 0.08 17900 0.026 930 13900 0.023 650 10000 0.021 415 6000 0.018 220
≤ 8D 0.07 16100 0.023 750 12500 0.021 530 9000 0.019 335 5400 0.016 175
≤ 10D 0.06 14300 0.021 590 11100 0.019 420 8000 0.017 265 4800 0.015 140
≤ 12D 0.04 12500 0.018 450 9800 0.016 320 7000 0.015 205 4200 0.013 105
≤ 15D 0.04 10700 0.016 330 8400 0.014 240 6000 0.012 150 3600 0.011 80
> 15D 0.02 9000 0.013 230 7000 0.012 160 5000 0.010 105 3000 0.009 55
MEX - 30÷55HRC - Corner radius
552
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
CUTTING PARAMETERS
MEXLN2R
SQUARE RIB
Material Group
ISO 513 P2 P3 P4 K1 K2 P4 P5 K3 P6 K4 H1 H4 H5
Hardness/Rm < 1000 N/mm² < 35 HRC 35 - 45 HRC 45 - 55 HRC
ap x ae ap x D ap x D ap x D ap x D
Vc (m/min) 70-110 50-90 30-70 20-40
D
(mm)
l1
(mm)
ap
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
1.8
≤ 6D 0.09 15900 0.028 890 12400 0.025 620 8800 0.022 395 5300 0.020 210
≤ 8D 0.08 14300 0.025 720 11100 0.023 500 8000 0.020 325 4800 0.018 170
≤ 10D 0.06 12700 0.022 570 9900 0.020 400 7100 0.018 255 4200 0.016 130
≤ 12D 0.05 11100 0.020 440 8700 0.018 310 6200 0.016 195 3700 0.014 100
≤ 15D 0.04 9600 0.017 320 7400 0.015 220 5300 0.013 140 3200 0.012 75
> 15D 0.03 8000 0.014 220 6200 0.013 160 4400 0.011 100 2700 0.010 55
2
≤ 6D 0.10 14300 0.030 860 11100 0.027 600 8000 0.024 385 4800 0.021 200
≤ 8D 0.09 12900 0.027 700 10000 0.024 490 7200 0.022 310 4300 0.019 165
≤ 10D 0.07 11500 0.024 550 8900 0.022 380 6400 0.019 245 3800 0.017 130
≤ 12D 0.06 10000 0.021 420 7800 0.019 290 5600 0.017 190 3300 0.015 95
≤ 15D 0.05 8600 0.018 310 6700 0.016 220 4800 0.014 140 2900 0.013 75
> 15D 0.03 8600 0.018 310 6700 0.016 220 4800 0.014 140 2900 0.013 75
2.5
≤ 6D 0.13 11500 0.035 810 8900 0.032 560 6400 0.028 360 3800 0.025 185
≤ 8D 0.11 10300 0.032 650 8000 0.028 450 5700 0.025 285 3400 0.022 150
≤ 10D 0.09 9200 0.028 520 7100 0.025 360 5100 0.022 230 3100 0.020 120
≤ 12D 0.07 8000 0.025 390 6200 0.022 270 4500 0.020 175 2700 0.017 95
≤ 15D 0.06 6900 0.021 290 5400 0.019 200 3800 0.017 130 2300 0.015 70
> 15D 0.04 6900 0.021 290 5400 0.019 200 3800 0.017 130 2300 0.015 70
3
≤ 6D 0.15 9600 0.040 770 7400 0.036 530 5300 0.032 340 3200 0.028 180
≤ 8D 0.13 8600 0.036 620 6700 0.032 430 4800 0.029 275 2900 0.025 145
≤ 10D 0.11 7600 0.032 490 5900 0.029 340 4200 0.026 215 2500 0.022 110
≤ 12D 0.08 6700 0.028 380 5200 0.025 260 3700 0.022 165 2200 0.020 85
≤ 15D 0.07 5700 0.024 270 4500 0.022 190 3200 0.019 125 1900 0.017 65
> 15D 0.05 5700 0.024 270 4500 0.022 190 3200 0.019 125 1900 0.017 65
4
≤ 6D 0.20 7200 0.050 720 5600 0.045 500 4000 0.040 320 2400 0.035 170
≤ 8D 0.17 6400 0.045 580 5000 0.041 410 3600 0.036 260 2100 0.032 130
≤ 10D 0.14 5700 0.040 460 4500 0.036 320 3200 0.032 205 1900 0.028 105
≤ 12D 0.11 5000 0.035 350 3900 0.032 250 2800 0.028 155 1700 0.025 85
≤ 15D 0.09 4300 0.030 260 3300 0.027 180 2400 0.024 115 1400 0.021 60
> 15D 0.06 4300 0.030 260 3300 0.027 180 2400 0.024 115 1400 0.021 60
MEX - 30÷55HRC - Corner radius
553
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
h stock standard f non-stock standard m stock exhaustion
MEXLS2R
cylindrical shank, 2 flutes, long, corner radius
OSAWA
NORM
<55
PMKNSH
++ +
+ 1st choice , suitable
SLOTTING
D D Tol. CR CR Tol. d(h6) l l1 L z EDP No. Stock
20/-0.020 0.30 +/-0.010 6 4 75 2 MEXLS2R03020 h
30/-0.025 0.30 +/-0.010 6 5 75 2 MEXLS2R03030 h
30/-0.025 0.50 +/-0.010 6 5 75 2 MEXLS2R05030 h
40/-0.025 0.30 +/-0.010 6 8 75 2 MEXLS2R03040 h
40/-0.025 0.50 +/-0.010 6 8 75 2 MEXLS2R05040 h
50/-0.025 0.30 +/-0.010 6 9 75 2 MEXLS2R03050 h
50/-0.025 0.50 +/-0.010 6 9 75 2 MEXLS2R05050 h
60/-0.025 0.30 +/-0.010 6 10 75 2 MEXLS2R03060 h
60/-0.025 0.50 +/-0.010 6 10 75 2 MEXLS2R05060 h
60/-0.025 1.00 +/-0.010 6 10 75 2 MEXLS2R10060 h
80/-0.030 0.30 +/-0.010 8 12 75 2 MEXLS2R03080 h
80/-0.030 0.50 +/-0.010 8 12 75 2 MEXLS2R05080 h
80/-0.030 1.00 +/-0.010 8 12 75 2 MEXLS2R10080 h
10 0/-0.030 0.50 +/-0.010 10 14 100 2 MEXLS2R05100 h
10 0/-0.030 1.00 +/-0.010 10 14 100 2 MEXLS2R10100 h
12 0/-0.030 0.50 +/-0.010 12 16 100 2 MEXLS2R05120 h
12 0/-0.030 1.00 +/-0.010 12 16 100 2 MEXLS2R10120 h
16 0/-0.030 0.50 +/-0.010 16 22 125 2 MEXLS2R05160 h
16 0/-0.030 1.00 +/-0.010 16 22 125 2 MEXLS2R10160 h
CR
CR
MEX - 30÷55HRC - Corner radius
554
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
CUTTING PARAMETERS
MEXLS2R
SLOTTING
Material
Group
ISO 513
P2 P3 P4 K1 K2 P4 P5 K3 P6 K4 H1 H4 H5
Hardness/Rm < 1000 N/mm² < 35 HRC 35 - 45 HRC 45 - 55 HRC
ap x ae 0.3D x D 0.3D x D 0.2D x D 0.05D x D
Vc (m/min) 70-110 50-90 30-70 20-40
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
214300 0.009 260 11440 0.008 190 8580 0.007 125 5150 0.006 65
39600 0.012 230 7680 0.011 170 5760 0.010 110 3460 0.008 60
47200 0.018 260 5760 0.016 190 4320 0.014 125 2590 0.013 65
55700 0.024 270 4560 0.022 200 3420 0.019 130 2050 0.017 70
64800 0.029 280 3840 0.026 200 2880 0.023 135 1730 0.020 70
83600 0.035 250 2880 0.032 180 2160 0.028 120 1300 0.025 65
10 2900 0.041 240 2320 0.037 170 1740 0.033 115 1040 0.029 60
12 2400 0.050 240 1920 0.045 170 1440 0.040 115 860 0.035 60
16 1800 0.065 230 1400 0.059 160 1000 0.052 105 600 0.046 55
< D3: ap = 0.4mm max
MEX - 30÷55HRC - Corner radius
555
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
h stock standard f non-stock standard m stock exhaustion
D D Tol. CR CR Tol. d(h6) l l1 L z EDP No. Stock
10/-0.020 0.20 +/-0.010 4 3 50 4 MEXCS4R01002 h
1.5 0/-0.020 0.20 +/-0.010 4 4.5 50 4 MEXCS4R01502 h
20/-0.020 0.20 +/-0.010 4 6.5 50 4 MEXCS4R02002 h
20/-0.020 0.30 +/-0.010 4 6.5 50 4 MEXCS4R02003 h
2.5 0/-0.020 0.20 +/-0.010 4 6.5 50 4 MEXCS4R02502 h
2.5 0/-0.020 0.50 +/-0.010 4 6.5 50 4 MEXCS4R02505 h
30/-0.025 0.20 +/-0.010 4 9 50 4 MEXCS4R03002 h
30/-0.025 0.30 +/-0.010 4 9 50 4 MEXCS4R03003 h
30/-0.025 0.50 +/-0.010 4 9 50 4 MEXCS4R03005 h
40/-0.025 0.30 +/-0.010 4 12 50 4 MEXCS4R04003 h
40/-0.025 0.50 +/-0.010 4 12 50 4 MEXCS4R04005 h
40/-0.025 1.00 +/-0.010 4 12 50 4 MEXCS4R04010 h
50/-0.025 0.30 +/-0.010 5 15 50 4 MEXCS4R05003 h
50/-0.025 0.50 +/-0.010 5 15 50 4 MEXCS4R05005 h
50/-0.025 1.00 +/-0.010 5 15 50 4 MEXCS4R05010 h
60/-0.025 0.30 +/-0.010 6 16 50 4 MEXCS4R06003 h
60/-0.025 0.50 +/-0.010 6 16 50 4 MEXCS4R06005 h
60/-0.025 1.00 +/-0.010 6 16 50 4 MEXCS4R06010 h
80/-0.030 0.30 +/-0.010 8 20 64 4 MEXCS4R08003 h
80/-0.030 0.50 +/-0.010 8 20 64 4 MEXCS4R08005 h
80/-0.030 1.00 +/-0.010 8 20 64 4 MEXCS4R08010 h
80/-0.030 1.50 +/-0.010 8 20 64 4 MEXCS4R08015 h
80/-0.030 2.00 +/-0.010 8 20 64 4 MEXCS4R08020 h
10 0/-0.030 0.30 +/-0.010 10 22 75 4 MEXCS4R10003 h
10 0/-0.030 0.50 +/-0.010 10 22 75 4 MEXCS4R10005 h
10 0/-0.030 1.00 +/-0.010 10 22 75 4 MEXCS4R10010 h
10 0/-0.030 1.50 +/-0.010 10 22 75 4 MEXCS4R10015 h
10 0/-0.030 2.00 +/-0.010 10 22 75 4 MEXCS4R10020 h
12 0/-0.030 0.30 +/-0.010 12 25 75 4 MEXCS4R12003 h
12 0/-0.030 0.50 +/-0.010 12 25 75 4 MEXCS4R12005 h
12 0/-0.030 1.00 +/-0.010 12 25 75 4 MEXCS4R12010 h
12 0/-0.030 1.50 +/-0.010 12 25 75 4 MEXCS4R12015 h
12 0/-0.030 2.00 +/-0.010 12 25 75 4 MEXCS4R12020 h
12 0/-0.030 3.00 +/-0.010 12 25 75 4 MEXCS4R12030 h
14 0/-0.030 0.50 +/-0.010 14 32 90 4 MEXCS4R14005 f
14 0/-0.030 1.00 +/-0.010 14 32 90 4 MEXCS4R14010 h
14 0/-0.030 2.00 +/-0.010 14 32 90 4 MEXCS4R14020 f
16 0/-0.030 0.50 +/-0.010 16 32 90 4 MEXCS4R16005 h
16 0/-0.030 1.00 +/-0.010 16 32 90 4 MEXCS4R16010 h
MEXCS4R
cylindrical shank, 4 flutes, corner radius
OSAWA
NORM
<55
PMKNSH
++ +
+ 1st choice , suitable
SIDE MILLING
CR
CR
MEX - 30÷55HRC - Corner radius
556
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
h stock standard f non-stock standard m stock exhaustion
D D Tol. CR CR Tol. d(h6) l l1 L z EDP No. Stock
16 0/-0.030 2.00 +/-0.010 16 32 90 4 MEXCS4R16020 h
16 0/-0.030 3.00 +/-0.010 16 32 90 4 MEXCS4R16030 h
18 0/-0.030 0.50 +/-0.010 18 38 100 4 MEXCS4R18005 h
18 0/-0.030 1.00 +/-0.010 18 38 100 4 MEXCS4R18010 h
20 0/-0.030 0.50 +/-0.010 20 38 100 4 MEXCS4R20005 h
20 0/-0.030 1.00 +/-0.010 20 38 100 4 MEXCS4R20010 h
20 0/-0.030 2.00 +/-0.010 20 38 100 4 MEXCS4R20020 h
20 0/-0.030 3.00 +/-0.010 20 38 100 4 MEXCS4R20030 h
MEXCS4R
cylindrical shank, 4 flutes, corner radius
OSAWA
NORM
<55
PMKNSH
++ +
+ 1st choice , suitable
SIDE MILLING
CR
CR
MEX - 30÷55HRC - Corner radius
557
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
CUTTING PARAMETERS
MEXCS4R
SIDE MILLING
Material
Group
ISO 513
P2 P3 P4 K1 K2 P4 P5 K3 P6 K4 H1 H4 H5
Hardness/Rm < 1000 N/mm² < 35 HRC 35 - 45 HRC 45 - 55 HRC
ap x ae D x 0.1D D x 0.1D D x 0.05D D x 0.05D
Vc (m/min) 80-120 50-90 40-60 20-40
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
131850 0.009 1080 22290 0.008 680 15920 0.007 435 9550 0.006 225
215920 0.017 1080 11150 0.015 680 7960 0.014 435 4780 0.012 230
310620 0.026 1080 7430 0.023 680 5310 0.020 435 3180 0.018 225
47960 0.034 1080 5570 0.031 680 3980 0.027 435 2390 0.024 230
56370 0.038 970 4460 0.034 610 3180 0.031 390 1910 0.027 205
65310 0.043 900 3720 0.038 570 2650 0.034 360 1590 0.030 190
83980 0.055 880 2790 0.050 550 1990 0.044 350 1190 0.039 185
10 3180 0.071 900 2230 0.064 570 1590 0.057 360 960 0.050 190
12 2650 0.085 900 1860 0.077 570 1330 0.068 360 800 0.060 190
14 2270 0.098 890 1590 0.088 560 1140 0.078 355 680 0.068 185
16 1990 0.110 880 1390 0.099 550 1000 0.088 350 600 0.077 185
18 1770 0.125 890 1240 0.113 560 880 0.100 350 530 0.088 185
20 1590 0.140 890 1110 0.126 560 800 0.112 360 480 0.098 190
MEX - 30÷55HRC - Corner radius
558
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
CR
h stock standard f non-stock standard m stock exhaustion
MEX410R
cylindrical shank, 4 flutes, short, corner radius
OSAWA
NORM
<55
PMKNSH
++ +
+ 1st choice , suitable
SIDE MILLING
D D Tol. CR CR Tol. d(h6) l l1 d1 L z EDP No. Stock
20/-0.012 0.20 +/-0.020 6 2.5 5 1.90 50 4 MEX410R02020 h
2.5 0/-0.012 0.25 +/-0.020 6 3 6 2.40 50 4 MEX410R025025 h
30/-0.012 0.30 +/-0.020 6 4 7 2.80 50 4 MEX410R03030 h
40/-0.012 0.50 +/-0.020 6 5 9 3.70 50 4 MEX410R05040 h
50/-0.012 0.50 +/-0.020 6 6 12 4.60 50 4 MEX410R05050 h
60/-0.012 0.50 +/-0.020 6 7 14 5.60 60 4 MEX410R05060 h
80/-0.015 1.00 +/-0.020 8 10 18 7.40 70 4 MEX410R10080 h
10 0/-0.015 1.00 +/-0.020 10 12 25 9.40 75 4 MEX410R10100 h
12 0/-0.015 1.00 +/-0.020 12 15 30 11.40 80 4 MEX410R10120 h
CR
MEX - 30÷55HRC - Corner radius
559
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
CUTTING PARAMETERS
MEX410R
SIDE MILLING
Material
Group
ISO 513
P2 P3 P4 K1 K2 P4 P5 K3 P6 K4 H1 H4 H5
Hardness/Rm < 1000 N/mm² < 35 HRC 35 - 45 HRC 45 - 55 HRC
ap x ae D x 0.1D D x 0.1D D x 0.05D D x 0.05D
Vc (m/min) 80-120 50-90 40-60 20-40
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
215920 0.015 970 11150 0.014 610 7960 0.012 390 4780 0.011 205
310620 0.023 970 7430 0.021 610 5310 0.018 390 3180 0.016 205
47960 0.031 970 5570 0.028 610 3980 0.024 390 2390 0.021 205
56370 0.034 880 4460 0.031 550 3180 0.028 350 1910 0.024 185
65310 0.038 810 3720 0.034 510 2650 0.031 325 1590 0.027 170
83980 0.050 790 2790 0.045 500 1990 0.040 315 1190 0.035 165
10 3180 0.065 830 2230 0.059 520 1590 0.052 330 960 0.046 175
12 2650 0.077 810 1860 0.069 510 1330 0.061 325 800 0.054 170
MEX - 30÷55HRC - Corner radius
560
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
h stock standard f non-stock standard m stock exhaustion
MEXLS4R
cylindrical shank, 4 flutes, long, corner radius
OSAWA
NORM
<55
PMKNSH
++ +
+ 1st choice , suitable
SIDE MILLING
D D Tol. CR CR Tol. d(h6) l l1 L z EDP No. Stock
20/-0.020 0.30 +/-0.010 6 4 75 4 MEXLS4R03020 h
30/-0.025 0.30 +/-0.010 6 5 75 4 MEXLS4R03030 h
30/-0.025 0.50 +/-0.010 6 5 75 4 MEXLS4R05030 h
40/-0.025 0.30 +/-0.010 6 8 75 4 MEXLS4R03040 h
40/-0.025 0.50 +/-0.010 6 8 75 4 MEXLS4R05040 h
50/-0.025 0.30 +/-0.010 6 9 75 4 MEXLS4R03050 h
50/-0.025 0.50 +/-0.010 6 9 75 4 MEXLS4R05050 h
60/-0.025 0.30 +/-0.010 6 10 75 4 MEXLS4R03060 h
60/-0.025 0.50 +/-0.010 6 10 75 4 MEXLS4R05060 h
60/-0.025 1.00 +/-0.010 6 10 75 4 MEXLS4R10060 h
80/-0.030 0.30 +/-0.010 8 12 75 4 MEXLS4R03080 h
80/-0.030 0.50 +/-0.010 8 12 75 4 MEXLS4R05080 h
80/-0.030 1.00 +/-0.010 8 12 75 4 MEXLS4R10080 h
10 0/-0.030 0.50 +/-0.010 10 14 100 4 MEXLS4R05100 h
10 0/-0.030 1.00 +/-0.010 10 14 100 4 MEXLS4R10100 h
12 0/-0.030 0.50 +/-0.010 12 16 100 4 MEXLS4R05120 h
12 0/-0.030 1.00 +/-0.010 12 16 100 4 MEXLS4R10120 h
16 0/-0.030 0.50 +/-0.010 16 22 125 4 MEXLS4R05160 h
16 0/-0.030 1.00 +/-0.010 16 22 125 4 MEXLS4R10160 h
CR
CR
MEX - 30÷55HRC - Corner radius
561
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
CUTTING PARAMETERS
MEXLS4R
SIDE MILLING
Material
Group
ISO 513
P2 P3 P4 K1 K2 P4 P5 K3 P6 K4 H1 H4 H5
Hardness/Rm < 1000 N/mm² < 35 HRC 35 - 45 HRC 45 - 55 HRC
ap x ae D x 0.05D D x 0.05D D x 0.05D D x 0.05D
Vc (m/min) 70-110 50-90 40-60 20-40
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
214330 0.014 830 11150 0.013 580 7960 0.012 370 4780 0.010 195
39550 0.022 830 7430 0.020 580 5310 0.017 370 3180 0.015 195
47170 0.029 830 5570 0.026 580 3980 0.023 370 2390 0.020 195
55730 0.033 750 4460 0.029 520 3180 0.026 330 1910 0.023 175
64780 0.036 690 3720 0.033 480 2650 0.029 305 1590 0.025 160
83580 0.047 670 2790 0.042 470 1990 0.038 300 1190 0.033 155
10 2870 0.060 690 2230 0.054 480 1590 0.048 305 960 0.042 160
12 2390 0.072 690 1860 0.065 480 1330 0.058 305 800 0.051 160
16 1790 0.094 670 1390 0.084 470 1000 0.075 300 600 0.065 155
MEX - 30÷55HRC - Corner radius
562
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
h stock standard f non-stock standard m stock exhaustion
MEX610R
cylindrical shank, multi flute, short, corner radius
OSAWA
NORM
<55
PMKNSH
++ +
+ 1st choice , suitable
SIDE MILLING
D D Tol. CR CR Tol. d(h6) l l1 d1 L z EDP No. Stock
60/-0.030 0.50 +/-0.020 6 6 14 5.50 50 6 MEX610R05060 h
80/-0.030 0.50 +/-0.020 8 8 24 7.40 60 6 MEX610R05080 h
10 0/-0.030 1.00 +/-0.020 10 10 30 9.20 70 6 MEX610R10100 h
12 0/-0.030 1.00 +/-0.020 12 12 30 11.00 75 6 MEX610R10120 h
CR
CR
MEX - 30÷55HRC - Corner radius
563
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
CUTTING PARAMETERS
MEX610R
SIDE MILLING
Material
Group
ISO 513
P2 P3 P4 K1 K2 P4 P5 K3 P6 K4 H1 H4 H5
Hardness/Rm < 1000 N/mm² < 35 HRC 35 - 45 HRC 45 - 55 HRC
ap x ae D x 0.1D D x 0.1D D x 0.05D D x 0.05D
Vc (m/min) 120-160 90-130 60-100 50-70
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
67430 0.018 800 5840 0.016 570 4250 0.014 370 3180 0.013 240
85570 0.028 920 4380 0.025 650 3180 0.022 420 2390 0.019 280
10 4460 0.034 900 3500 0.030 640 2550 0.027 410 1910 0.024 270
12 3720 0.041 910 2920 0.037 640 2120 0.033 420 1590 0.029 270
MEX - 30÷55HRC - Corner radius
564
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
h stock standard f non-stock standard m stock exhaustion
MEX611R
cylindrical shank, multi flute, long, corner radius
OSAWA
NORM
<55
PMKNSH
++ +
+ 1st choice , suitable
SIDE MILLING
D D Tol. CR CR Tol. d(h6) l l1 L z EDP No. Stock
60/-0.030 0.50 +/-0.020 6 15 90 6 MEX611R05060 h
80/-0.030 0.50 +/-0.020 8 20 100 6 MEX611R05080 h
10 0/-0.030 0.50 +/-0.020 10 25 100 6 MEX611R05100 h
10 0/-0.030 1.00 +/-0.020 10 25 100 6 MEX611R10100 h
12 0/-0.030 0.50 +/-0.020 12 30 100 6 MEX611R05120 h
12 0/-0.030 1.00 +/-0.020 12 30 100 6 MEX611R10120 h
CR
CR
MEX - 30÷55HRC - Corner radius
565
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
CUTTING PARAMETERS
MEX611R
SIDE MILLING
Material
Group
ISO 513
P2 P3 P4 K1 K2 P4 P5 K3 P6 K4 H1 H4 H5
Hardness/Rm < 1000 N/mm² < 35 HRC 35 - 45 HRC 45 - 55 HRC
ap x ae 1.5D x 0.05D 1.5D x 0.05D 1.5D x 0.05D 1.5D x 0.05D
Vc (m/min) 100-140 80-120 40-80 20-60
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
66370 0.015 580 5310 0.014 440 3180 0.012 230 2120 0.011 140
84780 0.023 670 3980 0.021 500 2390 0.019 270 1590 0.016 160
10 3820 0.029 650 3180 0.026 490 1910 0.023 260 1270 0.020 150
12 3180 0.035 660 2650 0.031 500 1590 0.028 260 1060 0.024 150
14 2730 0.041 670 2270 0.037 500 1360 0.033 270 910 0.029 160
16 2390 0.048 690 1990 0.043 520 1190 0.038 270 800 0.034 160
18 2120 0.055 700 1770 0.050 530 1060 0.044 280 710 0.039 160
20 1910 0.063 720 1590 0.057 540 960 0.050 290 640 0.044 170
MEX - 30÷55HRC - Ball nose
566
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
h stock standard f non-stock standard m stock exhaustion
MEXMB2
cylindrical shank, 2 flutes ball nose, miniature
OSAWA
NORM
<55
PMKNSH
++ +
+ 1st choice , suitable
COPYING
D D Tol. R R Tol. d(h6) l l1 L z EDP No. Stock
0.2 0/-0.020 0.10 0/-0.020 4 0.4 40 2 MEXMB20020 h
0.3 0/-0.020 0.15 0/-0.020 4 0.6 40 2 MEXMB20030 h
0.4 0/-0.020 0.20 0/-0.020 4 0.8 40 2 MEXMB20040 h
0.5 0/-0.020 0.25 0/-0.020 4 1.2 40 2 MEXMB20050 h
0.6 0/-0.020 0.30 0/-0.020 4 1.4 40 2 MEXMB20060 h
0.7 0/-0.020 0.35 0/-0.020 4 1.6 40 2 MEXMB20070 h
0.8 0/-0.020 0.40 0/-0.020 4 1.8 40 2 MEXMB20080 h
0.9 0/-0.020 0.45 0/-0.020 4 2 40 2 MEXMB20090 h
10/-0.020 0.50 0/-0.020 4 3 50 2 MEXMB2010050 h
1.5 0/-0.020 0.75 0/-0.020 4 3 50 2 MEXMB2015050 h
20/-0.020 1.00 0/-0.020 4 4 50 2 MEXMB2020050 h
R
MEX - 30÷55HRC - Ball nose
567
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
CUTTING PARAMETERS
MEXMB2
COPYING
ae
ap
Material
Group
ISO 513
P2 P3 P4 K1 K2 P4 P5 K3 P6 K4 H1 H4 H5
Hardness/Rm < 1000 N/mm² < 35 HRC 35 - 45 HRC 45 - 55 HRC
ap x ae 0.05D x 0.2D 0.05D x 0.1D 0.05D x 0.1D 0.05D x 0.1D
Vc (m/min) 110-130 90-110 50-70 45-55
D
(mm)
D (e.)
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
0.2 0.09 40000 0.006 480 40000 0.005 430 40000 0.005 360 40000 0.004 310
0.3 0.13 40000 0.007 580 40000 0.006 520 40000 0.006 460 40000 0.005 405
0.4 0.17 40000 0.009 720 40000 0.008 650 40000 0.007 575 40000 0.006 505
0.5 0.22 40000 0.011 860 40000 0.010 780 38220 0.009 660 31850 0.008 480
0.6 0.26 40000 0.014 1080 40000 0.012 970 31850 0.011 690 26540 0.009 500
0.7 0.31 40000 0.016 1300 40000 0.015 1170 27300 0.013 710 22750 0.011 515
0.8 0.35 40000 0.018 1440 40000 0.016 1300 23890 0.014 690 19900 0.013 500
0.9 0.39 40000 0.021 1660 35390 0.019 1320 21230 0.017 705 17690 0.014 515
1 0.44 38220 0.023 1790 40000 0.021 1680 19110 0.019 715 15920 0.016 520
1.5 0.65 25480 0.036 1830 21230 0.032 1380 12740 0.029 735 10620 0.025 535
2 0.87 19110 0.050 1890 15920 0.045 1420 9550 0.040 755 7960 0.035 550
_
_
n
(rpm)
Vf
(mm/min)
15° x 1.1 x 1.1
MEX - 30÷55HRC - Ball nose
568
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
h stock standard f non-stock standard m stock exhaustion
MEXMB2SC
cylindrical shank, 2 flutes ball nose, short cutting length,
miniature
OSAWA
NORM
<55
PMKNSH
++ +
+ 1st choice , suitable
COPYING
D D Tol. R R Tol. d(h6) l l1 L z EDP No. Stock
0.2 0/-0.020 0.10 0/-0.020 4 0.2 50 2 MEXMB2SC0020 h
0.3 0/-0.020 0.15 0/-0.020 4 0.3 50 2 MEXMB2SC0030 h
0.4 0/-0.020 0.20 0/-0.020 4 0.4 50 2 MEXMB2SC0040 h
0.5 0/-0.020 0.25 0/-0.020 4 0.4 50 2 MEXMB2SC0050 h
0.6 0/-0.020 0.30 0/-0.020 4 0.5 50 2 MEXMB2SC0060 h
0.8 0/-0.020 0.40 0/-0.020 4 0.6 50 2 MEXMB2SC0080 h
R
MEX - 30÷55HRC - Ball nose
569
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
CUTTING PARAMETERS
MEXMB2SC
COPYING
ae
ap
Material
Group
ISO 513
P2 P3 P4 K1 K2 P4 P5 K3 P6 K4 H1 H4 H5
Hardness/Rm < 1000 N/mm² < 35 HRC 35 - 45 HRC 45 - 55 HRC
ap x ae 0.05D x 0.1D 0.05D x 0.1D 0.05D x 0.1D 0.05D x 0.1D
Vc (m/min) 110-130 90-110 50-70 45-55
D
(mm)
D (e.)
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
0.2 0.09 40000 0.006 480 40000 0.005 430 40000 0.005 385 40000 0.004 335
0.3 0.13 40000 0.008 640 40000 0.007 580 40000 0.006 510 40000 0.006 450
0.4 0.17 40000 0.010 800 40000 0.009 720 40000 0.008 640 40000 0.007 560
0.5 0.22 40000 0.012 960 40000 0.011 860 38220 0.010 735 31850 0.008 535
0.6 0.26 40000 0.015 1200 40000 0.014 1080 31850 0.012 765 26540 0.011 555
0.8 0.35 40000 0.018 1440 40000 0.016 1300 27300 0.014 785 22750 0.013 575
_
_
n
(rpm)
Vf
(mm/min)
15° x 1.1 x 1.1
MEX - 30÷55HRC - Ball nose
570
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
h stock standard f non-stock standard m stock exhaustion
D D Tol. R R Tol. d(h6) l l1 d1 L z 30’ 1° 1°30’ 2° 3° EDP No. Stock
0.2 0/-0.020 0.10 0/-0.020 4 0.2 0.5 0.15 50 2 0.57 0.58 0.6 0.62 0.66 MEXLNB2002005 h
0.2 0/-0.020 0.10 0/-0.020 4 0.2 1 0.15 50 2 1.08 1.12 1.15 1.19 1.27 MEXLNB200201 h
0.2 0/-0.020 0.10 0/-0.020 4 0.2 1.5 0.15 50 2 1.60 1.65 1.71 1.76 1.89 MEXLNB2002015 h
0.3 0/-0.020 0.15 0/-0.020 4 0.3 1 0.25 50 2 1.08 1.11 1.15 1.18 1.26 MEXLNB200301 h
0.3 0/-0.020 0.15 0/-0.020 4 0.3 2 0.25 50 2 2.12 2.18 2.25 2.33 2.49 MEXLNB200302 h
0.3 0/-0.020 0.15 0/-0.020 4 0.3 3 0.25 50 2 3.15 3.25 3.36 3.48 3.73 MEXLNB200303 h
0.4 0/-0.020 0.20 0/-0.020 4 0.4 1 0.35 50 2 1.08 1.11 1.14 1.18 1.25 MEXLNB200401 h
0.4 0/-0.020 0.20 0/-0.020 4 0.4 2 0.35 50 2 2.11 2.18 2.25 2.32 2.48 MEXLNB200402 h
0.4 0/-0.020 0.20 0/-0.020 4 0.4 3 0.35 50 2 3.15 3.25 3.36 3.47 3.72 MEXLNB200403 h
0.4 0/-0.020 0.20 0/-0.020 4 0.4 4 0.35 50 2 4.18 4.32 4.46 4.62 4.95 MEXLNB200404 h
0.4 0/-0.020 0.20 0/-0.020 4 0.4 5 0.35 50 2 5.21 5.39 5.57 5.77 6.18 MEXLNB200405 h
0.5 0/-0.020 0.25 0/-0.020 4 0.4 2 0.45 50 2 2.15 2.22 2.29 2.36 2.52 MEXLNB200502 h
0.5 0/-0.020 0.25 0/-0.020 4 0.4 3 0.45 50 2 3.18 3.29 3.39 3.51 3.75 MEXLNB200503 h
0.5 0/-0.020 0.25 0/-0.020 4 0.4 4 0.45 50 2 4.22 4.35 4.5 4.65 4.98 MEXLNB200504 h
0.5 0/-0.020 0.25 0/-0.020 4 0.4 5 0.45 50 2 5.25 5.42 5.61 5.8 6.22 MEXLNB200505 h
0.5 0/-0.020 0.25 0/-0.020 4 0.4 6 0.45 50 2 6.28 6.49 6.71 6.95 7.45 MEXLNB200506 h
0.5 0/-0.020 0.25 0/-0.020 4 0.4 8 0.45 50 2 8.35 8.63 8.93 9.24 9.92 MEXLNB200508 h
0.6 0/-0.020 0.30 0/-0.020 4 0.5 2 0.55 50 2 2.15 2.21 2.28 2.35 2.50 MEXLNB200602 h
0.6 0/-0.020 0.30 0/-0.020 4 0.5 3 0.55 50 2 3.18 3.28 3.39 3.50 3.74 MEXLNB200603 h
0.6 0/-0.020 0.30 0/-0.020 4 0.5 4 0.55 50 2 4.22 4.35 4.49 4.65 4.97 MEXLNB200604 h
0.6 0/-0.020 0.30 0/-0.020 4 0.5 5 0.55 50 2 5.25 5.42 5.60 5.79 6.21 MEXLNB200605 h
0.6 0/-0.020 0.30 0/-0.020 4 0.5 6 0.55 50 2 6.28 6.49 6.71 6.94 7.44 MEXLNB200606 h
0.6 0/-0.020 0.30 0/-0.020 4 0.5 8 0.55 50 2 8.35 8.63 8.92 9.23 9.91 MEXLNB200608 h
0.8 0/-0.020 0.40 0/-0.020 4 0.6 2 0.75 50 2 2.15 2.21 2.27 2.34 2.48 MEXLNB200802 h
0.8 0/-0.020 0.40 0/-0.020 4 0.6 4 0.75 50 2 4.21 4.34 4.48 4.63 4.95 MEXLNB200804 h
0.8 0/-0.020 0.40 0/-0.020 4 0.6 5 0.75 50 2 5.25 5.41 5.59 5.78 6.18 MEXLNB200805 h
0.8 0/-0.020 0.40 0/-0.020 4 0.6 6 0.75 50 2 6.28 6.48 6.70 6.93 7.42 MEXLNB200806 h
0.8 0/-0.020 0.40 0/-0.020 4 0.6 7 0.75 50 2 7.31 7.55 7.81 8.07 8.65 MEXLNB200807 h
0.8 0/-0.020 0.40 0/-0.020 4 0.6 8 0.75 50 2 8.35 8.62 8.91 9.22 9.88 MEXLNB200808 h
0.8 0/-0.020 0.40 0/-0.020 4 0.6 10 0.75 50 2 10.41 10.76 11.13 11.51 12.35 MEXLNB200810 h
10/-0.020 0.50 0/-0.020 4 0.8 3 0.95 50 2 3.27 3.37 3.47 3.57 3.80 MEXLNB201003 h
10/-0.020 0.50 0/-0.020 4 0.8 4 0.95 50 2 4.31 4.44 4.58 4.72 5.04 MEXLNB201004 h
10/-0.020 0.50 0/-0.020 4 0.8 5 0.95 50 2 5.34 5.51 5.68 5.87 6.27 MEXLNB201005 h
10/-0.020 0.50 0/-0.020 4 0.8 6 0.95 50 2 6.37 6.58 6.79 7.02 7.50 MEXLNB201006 h
10/-0.020 0.50 0/-0.020 4 0.8 7 0.95 50 2 7.41 7.64 7.90 8.16 8.74 MEXLNB201007 h
10/-0.020 0.50 0/-0.020 4 0.8 8 0.95 50 2 8.44 8.71 9.00 9.31 9.97 MEXLNB201008 h
10/-0.020 0.50 0/-0.020 4 0.8 9 0.95 50 2 9.47 9.78 10.11 10.46 11.21 MEXLNB201009 h
10/-0.020 0.50 0/-0.020 4 0.8 10 0.95 50 2 10.51 10.85 11.22 11.61 12.44 MEXLNB201010 h
10/-0.020 0.50 0/-0.020 4 0.8 12 0.95 50 2 12.57 12.99 13.43 13.9 14.91 MEXLNB201012 h
MEXLNB2
cylindrical shank, 2 flutes ball nose, extended and
reduced neck
OSAWA
NORM
<55
PMKNSH
++ +
+ 1st choice , suitable
ROUND RIB
R
actual length
α
actual length according to _ angle
MEX - 30÷55HRC - Ball nose
571
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
h stock standard f non-stock standard m stock exhaustion
D D Tol. R R Tol. d(h6) l l1 d1 L z 30’ 1° 1°30’ 2° 3° EDP No. Stock
10/-0.020 0.50 0/-0.020 4 0.8 14 0.95 50 2 14.64 15.13 15.65 16.19 17.37 MEXLNB201014 h
10/-0.020 0.50 0/-0.020 4 0.8 16 0.95 50 2 16.71 15.13 15.65 16.19 17.37 MEXLNB201016 h
10/-0.020 0.50 0/-0.020 4 0.8 20 0.95 60 2 20.84 21.55 22.29 23.08 24.78 MEXLNB201020 h
1.2 0/-0.020 0.60 0/-0.020 4 1 6 1.15 50 2 6.37 6.57 6.78 7.00 7.48 MEXLNB201206 h
1.2 0/-0.020 0.60 0/-0.020 4 1 8 1.15 50 2 8.44 8.71 8.99 9.30 9.95 MEXLNB201208 h
1.2 0/-0.020 0.60 0/-0.020 4 1 10 1.15 50 2 10.50 10.85 11.21 11.59 12.42 MEXLNB201210 h
1.2 0/-0.020 0.60 0/-0.020 4 1 12 1.15 50 2 12.57 12.98 13.42 13.89 14.88 MEXLNB201212 h
1.4 0/-0.020 0.70 0/-0.020 4 1.1 8 1.35 50 2 8.43 8.70 8.98 9.28 9.93 MEXLNB201408 h
1.4 0/-0.020 0.70 0/-0.020 4 1.1 12 1.35 50 2 12.57 12.98 13.41 13.87 14.86 MEXLNB201412 h
1.4 0/-0.020 0.70 0/-0.020 4 1.1 16 1.35 50 2 16.70 17.26 17.84 18.46 19.8 MEXLNB201416 h
1.5 0/-0.020 0.75 0/-0.020 4 1.2 8 1.45 50 2 8.43 8.70 8.98 9.27 9.91 MEXLNB201508 h
1.5 0/-0.020 0.75 0/-0.020 4 1.2 12 1.45 50 2 12.57 12.97 13.41 13.86 14.85 MEXLNB201512 h
1.5 0/-0.020 0.75 0/-0.020 4 1.2 16 1.45 50 2 16.7 17.25 17.84 18.45 19.78 MEXLNB201516 h
1.5 0/-0.020 0.75 0/-0.020 4 1.2 18 1.45 60 2 18.77 19.39 20.05 20.75 22.25 MEXLNB201518 h
1.6 0/-0.020 0.80 0/-0.020 4 1.3 8 1.55 50 2 8.43 8.69 8.97 9.27 9.90 MEXLNB201608 h
1.6 0/-0.020 0.80 0/-0.020 4 1.3 12 1.55 50 2 12.56 12.97 13.40 13.86 14.84 MEXLNB201612 h
1.6 0/-0.020 0.80 0/-0.020 4 1.3 16 1.55 50 2 16.7 17.25 17.83 18.45 19.77 MEXLNB201616 h
1.6 0/-0.020 0.80 0/-0.020 4 1.3 20 1.55 60 2 20.83 21.53 22.26 23.03 - MEXLNB201620 h
1.8 0/-0.020 0.90 0/-0.020 4 1.4 8 1.75 50 2 8.43 8.69 8.96 9.25 9.88 MEXLNB201808 h
1.8 0/-0.020 0.90 0/-0.020 4 1.4 12 1.75 50 2 12.56 12.96 13.39 13.84 14.81 MEXLNB201812 h
1.8 0/-0.020 0.90 0/-0.020 4 1.4 16 1.75 50 2 16.7 17.24 17.82 18.43 19.75 MEXLNB201816 h
1.8 0/-0.020 0.90 0/-0.020 4 1.4 20 1.75 60 2 20.83 21.52 22.25 23.02 - MEXLNB201820 h
20/-0.020 1.00 0/-0.020 4 1.6 4 1.95 50 2 4.29 4.40 4.52 4.65 4.92 MEXLNB202004 h
20/-0.020 1.00 0/-0.020 4 1.6 6 1.95 50 2 6.36 6.54 6.74 6.94 7.39 MEXLNB202006 h
20/-0.020 1.00 0/-0.020 4 1.6 8 1.95 50 2 8.42 8.68 8.95 9.24 9.86 MEXLNB202008 h
20/-0.020 1.00 0/-0.020 4 1.6 10 1.95 50 2 10.49 10.82 11.17 11.53 12.32 MEXLNB202010 h
20/-0.020 1.00 0/-0.020 4 1.6 12 1.95 50 2 12.56 12.96 13.38 13.83 14.79 MEXLNB202012 h
20/-0.020 1.00 0/-0.020 4 1.6 14 1.95 50 2 14.62 15.10 15.59 16.12 17.26 MEXLNB202014 h
20/-0.020 1.00 0/-0.020 4 1.6 16 1.95 50 2 16.69 17.23 17.81 18.42 19.73 MEXLNB202016 h
20/-0.020 1.00 0/-0.020 4 1.6 18 1.95 60 2 18.76 19.37 20.02 20.71 - MEXLNB202018 h
20/-0.020 1.00 0/-0.020 4 1.6 20 1.95 60 2 20.83 21.51 22.24 23.00 - MEXLNB202020 h
20/-0.020 1.00 0/-0.020 4 1.6 25 1.95 75 2 25.99 26.86 27.77 28.74 - MEXLNB202025 h
20/-0.020 1.00 0/-0.020 4 1.6 30 1.95 75 2 31.16 32.21 33.31 - - MEXLNB202030 h
30/-0.025 1.50 0/-0.020 6 2.4 8 2.85 50 2 8.60 8.84 9.10 9.37 9.96 MEXLNB203008 h
30/-0.025 1.50 0/-0.020 6 2.4 10 2.85 50 2 10.67 10.98 11.32 11.67 12.43 MEXLNB203010 h
30/-0.025 1.50 0/-0.020 6 2.4 16 2.85 60 2 16.87 17.4 17.96 18.55 19.83 MEXLNB203016 h
30/-0.025 1.50 0/-0.020 6 2.4 20 2.85 60 2 21.00 21.68 22.39 23.14 24.77 MEXLNB203020 h
30/-0.025 1.50 0/-0.020 6 2.4 25 2.85 75 2 26.17 27.02 27.93 28.88 - MEXLNB203025 h
30/-0.025 1.50 0/-0.020 6 2.4 30 2.85 75 2 31.34 32.37 33.46 34.62 - MEXLNB203030 h
MEXLNB2
cylindrical shank, 2 flutes ball nose, extended and
reduced neck
OSAWA
NORM
<55
PMKNSH
++ +
+ 1st choice , suitable
ROUND RIB
R
actual length
α
actual length according to _ angle
MEX - 30÷55HRC - Ball nose
572
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
h stock standard f non-stock standard m stock exhaustion
D D Tol. R R Tol. d(h6) l l1 d1 L z 30’ 1° 1°30’ 2° 3° EDP No. Stock
30/-0.025 1.50 0/-0.020 6 2.4 35 2.85 75 2 36.51 37.72 39.00 40.35 - MEXLNB203035 h
40/-0.025 2.00 0/-0.020 6 3.2 10 3.85 50 2 10.84 11.15 11.47 11.81 12.54 MEXLNB204010 h
40/-0.025 2.00 0/-0.020 6 3.2 16 3.85 60 2 17.04 17.56 18.11 18.69 19.94 MEXLNB204016 h
40/-0.025 2.00 0/-0.020 6 3.2 20 3.85 60 2 21.18 21.84 22.54 23.28 - MEXLNB204020 h
40/-0.025 2.00 0/-0.020 6 3.2 25 3.85 75 2 26.35 27.19 28.08 29.02 - MEXLNB204025 h
40/-0.025 2.00 0/-0.020 6 3.2 30 3.85 75 2 31.51 32.53 33.61 - - MEXLNB204030 h
40/-0.025 2.00 0/-0.020 6 3.2 35 3.85 75 2 36.68 37.88 39.15 - - MEXLNB204035 h
40/-0.025 2.00 0/-0.020 6 3.2 40 3.85 100 2 41.85 43.23 - - - MEXLNB204040 h
40/-0.025 2.00 0/-0.020 6 3.2 50 3.85 100 2 52.19 53.92 - - - MEXLNB204050 h
MEXLNB2
cylindrical shank, 2 flutes ball nose, extended and
reduced neck
OSAWA
NORM
<55
PMKNSH
++ +
+ 1st choice , suitable
ROUND RIB
R
actual length
α
actual length according to _ angle
MEX - 30÷55HRC - Ball nose
573
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
CUTTING PARAMETERS
MEXLNB2
ROUND RIB
Material Group
ISO 513 P2 P3 P4 K1 K2 P4 P5 K3 P6 K4 H1 H4 H5
Hardness/Rm < 1000 N/mm² < 35 HRC 35 - 45 HRC 45 - 55 HRC
ap x ae ap x 0.2D ap x 0.1D ap x 0.1D ap x 0.1D
Vc (m/min) 110-130 90-110 50-70 45-55
D
(mm)
l1
(mm)
ap
(mm)
D (e.)
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
0.2
≤ 6D 0.01 0.09 40000 0.007 580 40000 0.006 520 40000 0.006 460 40000 0.005 405
≤ 8D 0.01 0.08 40000 0.006 520 40000 0.005 420 40000 0.005 375 40000 0.004 325
≤ 10D 0.01 0.07 40000 0.006 460 40000 0.004 330 40000 0.004 295 40000 0.003 260
0.3
≤ 6D 0.02 0.13 40000 0.009 720 40000 0.008 650 40000 0.007 575 40000 0.006 505
≤ 8D 0.01 0.12 40000 0.008 650 40000 0.007 520 40000 0.006 465 40000 0.005 410
≤ 10D 0.01 0.11 40000 0.007 580 40000 0.005 410 40000 0.005 370 40000 0.004 325
0.4
≤ 6D 0.02 0.17 40000 0.012 940 40000 0.011 840 40000 0.009 750 40000 0.008 655
≤ 8D 0.02 0.16 40000 0.011 840 40000 0.009 680 40000 0.008 605 35830 0.007 475
≤ 10D 0.01 0.15 40000 0.009 750 40000 0.007 540 38220 0.006 460 31850 0.005 335
0.5
≤ 6D 0.03 0.22 40000 0.015 1220 40000 0.014 1100 38220 0.012 935 31850 0.011 680
≤ 8D 0.02 0.20 40000 0.014 1100 40000 0.011 890 34390 0.010 680 28660 0.009 495
≤ 10D 0.02 0.18 40000 0.012 980 40000 0.009 710 30570 0.008 480 25480 0.007 350
0.6
≤ 6D 0.03 0.26 40000 0.019 1510 40000 0.017 1360 31850 0.015 965 26540 0.013 700
≤ 8D 0.03 0.24 40000 0.017 1360 40000 0.014 1100 28660 0.012 700 23890 0.011 510
≤ 10D 0.02 0.22 40000 0.015 1210 40000 0.011 870 25480 0.010 495 21230 0.008 360
0.8
≤ 6D 0.04 0.35 40000 0.023 1800 39810 0.020 1610 23890 0.018 860 19900 0.016 625
≤ 8D 0.03 0.32 40000 0.020 1620 35830 0.016 1180 21500 0.015 625 17910 0.013 455
≤ 10D 0.03 0.29 38220 0.018 1380 31850 0.013 830 19110 0.012 440 15920 0.010 320
1
≤ 6D 0.05 0.44 38220 0.027 2060 31850 0.024 1550 19110 0.022 825 15920 0.019 600
≤ 8D 0.04 0.40 34390 0.024 1670 28660 0.020 1130 17200 0.017 600 14330 0.015 440
≤ 10D 0.04 0.37 30570 0.022 1320 25480 0.016 790 15290 0.014 425 12740 0.012 310
≤ 12D 0.03 0.33 26750 0.019 1010 22290 0.012 530 13380 0.011 285 11150 0.009 205
> 12D 0.02 0.30 22930 0.016 740 19110 0.009 330 11460 0.008 180 9550 0.007 130
1.2
≤ 6D 0.06 0.52 31850 0.032 2010 21230 0.028 1200 15920 0.025 800 13270 0.022 585
≤ 8D 0.05 0.48 28660 0.028 1630 19110 0.023 880 14330 0.020 585 11940 0.018 425
≤ 10D 0.04 0.44 25480 0.025 1280 16990 0.018 620 12740 0.016 410 10620 0.014 300
≤ 12D 0.03 0.39 22290 0.022 980 14860 0.014 410 11150 0.012 275 9290 0.011 200
> 12D 0.03 0.36 19110 0.019 720 12740 0.010 260 9550 0.009 175 7960 0.008 125
1.5
≤ 6D 0.08 0.65 25480 0.041 2060 21230 0.036 1550 12740 0.032 825 10620 0.028 600
≤ 8D 0.06 0.61 22930 0.036 1670 19110 0.030 1130 11460 0.026 600 9550 0.023 440
≤ 10D 0.05 0.55 20380 0.032 1320 16990 0.023 790 10190 0.021 425 8490 0.018 310
≤ 12D 0.04 0.49 17830 0.028 1010 14860 0.018 530 8920 0.016 285 7430 0.014 205
> 12D 0.03 0.44 15290 0.024 740 12740 0.013 330 7640 0.012 180 6370 0.010 130
2
≤ 6D 0.10 0.87 19110 0.054 2060 15920 0.049 1550 9550 0.043 825 7960 0.038 600
≤ 8D 0.09 0.81 17200 0.049 1670 14330 0.039 1130 8600 0.035 600 7170 0.031 440
≤ 10D 0.07 0.74 15290 0.043 1320 12740 0.031 790 7640 0.028 420 6370 0.024 310
≤ 12D 0.06 0.65 13380 0.038 1010 11150 0.024 530 6690 0.021 285 5570 0.019 205
> 12D 0.05 0.59 11460 0.032 740 9550 0.017 330 5730 0.016 180 4780 0.014 130
2.5
≤ 6D 0.13 1.09 15290 0.054 1650 12740 0.049 1240 7640 0.043 660 6370 0.038 480
≤ 8D 0.11 1.01 13760 0.049 1340 11460 0.039 900 6880 0.035 480 5730 0.031 350
≤ 10D 0.09 0.92 12230 0.043 1060 10190 0.031 630 6110 0.028 340 5100 0.024 245
≤ 12D 0.07 0.82 10700 0.038 810 8920 0.024 420 5350 0.021 225 4460 0.019 165
> 12D 0.06 0.74 9170 0.032 590 7640 0.017 270 4590 0.016 145 3820 0.014 105
_
_
n
(rpm)
Vf
(mm/min)
45° x 1.65 x 1.65
30° x 1.30 x 1.30
15° x 1.15 x 1.15
MEX - 30÷55HRC - Ball nose
574
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
CUTTING PARAMETERS
MEXLNB2
ROUND RIB
Material Group
ISO 513 P2 P3 P4 K1 K2 P4 P5 K3 P6 K4 H1 H4 H5
Hardness/Rm < 1000 N/mm² < 35 HRC 35 - 45 HRC 45 - 55 HRC
ap x ae ap x 0.2D ap x 0.1D ap x 0.1D ap x 0.1D
Vc (m/min) 110-130 90-110 50-70 45-55
D
(mm)
l1
(mm)
ap
(mm)
D (e.)
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
3
≤ 6D 0.15 1.31 12740 0.068 1720 10620 0.061 1290 6370 0.054 690 5310 0.047 500
≤ 8D 0.13 1.21 11460 0.061 1390 9550 0.049 940 5730 0.044 500 4780 0.038 365
≤ 10D 0.11 1.10 10190 0.054 1100 8490 0.039 660 5100 0.035 355 4250 0.030 255
≤ 12D 0.08 0.98 8920 0.047 840 7430 0.030 440 4460 0.026 235 3720 0.023 170
> 12D 0.07 0.89 7640 0.041 620 6370 0.022 280 3820 0.019 150 3180 0.017 110
4
≤ 6D 0.20 1.74 9550 0.086 1630 7960 0.077 1230 4780 0.068 655 3980 0.060 475
≤ 8D 0.17 1.61 8600 0.077 1320 7170 0.062 890 4300 0.055 475 3580 0.048 345
≤ 10D 0.14 1.47 7640 0.068 1050 6370 0.049 630 3820 0.044 335 3180 0.038 245
≤ 12D 0.11 1.31 6690 0.060 800 5570 0.038 420 3340 0.034 225 2790 0.029 165
> 12D 0.09 1.19 5730 0.051 590 4780 0.028 260 2870 0.025 140 2390 0.022 105
_
_
n
(rpm)
Vf
(mm/min)
45° x 1.65 x 1.65
30° x 1.30 x 1.30
15° x 1.15 x 1.15
MEX - 30÷55HRC - Ball nose
575
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
h stock standard f non-stock standard m stock exhaustion
MEXLNB206
cylindrical shank, 2 flutes ball nose,
extended and reduced neck, 6mm. shank
OSAWA
NORM
<55
PMKNSH
++ +
+ 1st choice , suitable
ROUND RIB
D D Tol. R R Tol. d(h6) l l1 d1 L z 30’ 1° 1°30’ 2° 3° EDP No. Stock
0.5 0/-0.020 0.25 0/-0.020 6 0.5 2.5 0.45 60 2 2.67 2.75 2.82 2.90 2.90 MEXLNB2005026 h
0.6 0/-0.020 0.30 0/-0.020 6 0.6 6 0.55 60 2 6.28 6.48 6.67 6.87 6.87 MEXLNB2006066 h
0.8 0/-0.020 0.40 0/-0.020 6 0.8 4 0.75 60 2 4.21 4.34 4.46 4.58 4.58 MEXLNB2008046 h
0.8 0/-0.020 0.40 0/-0.020 6 0.8 8 0.75 60 2 8.35 8.61 8.86 9.12 9.12 MEXLNB2008086 h
10/-0.020 0.50 0/-0.020 6 1.5 5 0.95 60 2 5.34 5.50 5.65 5.81 5.81 MEXLNB2010056 h
10/-0.020 0.50 0/-0.020 6 1.5 8 0.95 60 2 8.44 8.70 8.96 9.22 9.22 MEXLNB2010086 h
10/-0.020 0.50 0/-0.020 6 1.5 12 0.95 60 2 12.57 12.97 13.36 13.75 13.75 MEXLNB2010126 h
1.2 0/-0.020 0.60 0/-0.020 6 1.8 6 1.15 60 2 6.37 6.56 6.74 6.93 6.93 MEXLNB2012066 h
1.5 0/-0.020 0.75 0/-0.020 6 2.3 8 1.45 60 2 8.43 8.68 8.93 9.18 9.18 MEXLNB2015086 h
1.5 0/-0.020 0.75 0/-0.020 6 2.3 12 1.45 60 2 12.57 12.95 13.34 13.72 13.72 MEXLNB2015126 h
1.5 0/-0.020 0.75 0/-0.020 6 2.3 16 1.45 60 2 16.70 17.22 17.74 18.26 18.26 MEXLNB2015166 h
1.6 0/-0.020 0.80 0/-0.020 6 2.4 16 1.55 60 2 16.70 17.22 17.73 18.25 18.25 MEXLNB2016166 h
1.8 0/-0.020 0.90 0/-0.020 6 2.7 16 1.75 60 2 16.70 17.21 17.72 18.24 18.24 MEXLNB2018166 h
20/-0.020 1.00 0/-0.020 6 3 12 1.95 60 2 12.56 12.93 13.31 13.69 13.69 MEXLNB2020126 h
20/-0.020 1.00 0/-0.020 6 3 16 1.95 60 2 16.69 17.2 17.71 18.22 18.22 MEXLNB2020166 h
20/-0.020 1.00 0/-0.020 6 3 20 1.95 75 2 20.83 21.47 22.12 22.76 22.76 MEXLNB2020206 h
R
actual length
α
actual length according to _ angle
MEX - 30÷55HRC - Ball nose
576
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
CUTTING PARAMETERS
MEXLNB206
ROUND RIB
Material Group
ISO 513 P2 P3 P4 K1 K2 P4 P5 K3 P6 K4 H1 H4 H5
Hardness/Rm < 1000 N/mm² < 35 HRC 35 - 45 HRC 45 - 55 HRC
ap x ae ap x 0.2D ap x 0.1D ap x 0.1D ap x 0.1D
Vc (m/min) 110-130 90-110 50-70 45-55
D
(mm)
l1
(mm)
ap
(mm)
D (e.)
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
0.5 ≤ 6D 0.03 0.22 40000 0.015 1220 40000 0.014 1100 38220 0.012 935 31850 0.011 680
≤ 10D 0.02 0.22 40000 0.015 1210 40000 0.011 870 25480 0.010 495 21230 0.008 360
0.8 ≤ 6D 0.04 0.35 40000 0.023 1800 39810 0.020 1610 23890 0.018 860 19900 0.016 625
≤ 10D 0.03 0.29 38220 0.018 1380 31850 0.013 830 19110 0.012 440 15920 0.010 320
1
≤ 6D 0.05 0.44 38220 0.027 2060 31850 0.024 1550 19110 0.022 825 15920 0.019 600
≤ 8D 0.04 0.40 34390 0.024 1670 28660 0.020 1130 17200 0.017 600 14330 0.015 440
≤ 12D 0.03 0.33 26750 0.019 1010 22290 0.012 530 13380 0.011 285 11150 0.009 205
1.2 ≤ 6D 0.06 0.52 31850 0.032 2010 21230 0.028 1200 15920 0.025 800 13270 0.022 585
1.5
≤ 6D 0.08 0.65 25480 0.041 2060 21230 0.036 1550 12740 0.032 825 10620 0.028 600
≤ 8D 0.06 0.61 22930 0.036 1670 19110 0.030 1130 11460 0.026 600 9550 0.023 440
≤ 12D 0.04 0.49 17830 0.028 1010 14860 0.018 530 8920 0.016 285 7430 0.014 205
1.6 ≤ 10D 0.06 0.59 19110 0.030 1130 15920 0.021 680 9550 0.019 360 7960 0.017 265
1.8 ≤ 10D 0.06 0.66 16990 0.032 1100 14150 0.023 660 8490 0.021 350 7080 0.018 255
2
≤ 6D 0.10 0.87 19110 0.054 2060 15920 0.049 1550 9550 0.043 825 7960 0.038 600
≤ 8D 0.09 0.81 17200 0.049 1670 14330 0.039 1130 8600 0.035 600 7170 0.031 440
≤ 10D 0.07 0.74 15290 0.043 1320 12740 0.031 790 7640 0.028 420 6370 0.024 310
_
_
n
(rpm)
Vf
(mm/min)
45° x 1.65 x 1.65
30° x 1.30 x 1.30
15° x 1.15 x 1.15
MEX - 30÷55HRC - Ball nose
577
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
h stock standard f non-stock standard m stock exhaustion
MEXCSB2
cylindrical shank, 2 flutes ball nose
OSAWA
NORM
<55
PMKNSH
++ +
+ 1st choice , suitable
COPYING
D D Tol. R R Tol. d(h6) l l1 L z EDP No. Stock
10/-0.030 0.50 +/-0.010 3 3 38 2 MEXCSB2010 h
1.5 0/-0.030 0.75 +/-0.010 3 3 38 2 MEXCSB2015 h
20/-0.030 1.00 +/-0.010 6 3 50 2 MEXCSB2020 h
2.5 0/-0.030 1.25 0/-0.020 4 4 50 2 MEXCSB202550 h
30/-0.030 1.50 +/-0.010 6 4 50 2 MEXCSB2030 h
40/-0.030 2.00 +/-0.010 6 5 54 2 MEXCSB2040 h
50/-0.030 2.50 +/-0.010 6 6 54 2 MEXCSB2050 h
60/-0.030 3.00 +/-0.010 6 12 60 2 MEXCSB2060 h
80/-0.030 4.00 +/-0.010 8 14 60 2 MEXCSB2080 h
10 0/-0.030 5.00 +/-0.010 10 18 70 2 MEXCSB2100 h
12 0/-0.030 6.00 +/-0.010 12 22 80 2 MEXCSB2120 h
14 0/-0.030 7.00 0/-0.020 14 32 90 2 MEXCSB2140 h
16 0/-0.030 8.00 0/-0.020 16 32 90 2 MEXCSB2160 h
18 0/-0.030 9.00 0/-0.020 18 38 100 2 MEXCSB2180 h
20 0/-0.030 10.00 0/-0.020 20 38 100 2 MEXCSB2200 h
R
MEX - 30÷55HRC - Ball nose
578
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
CUTTING PARAMETERS
MEXCSB2
COPYING
ae
ap
Material
Group
ISO 513
P2 P3 P4 K1 K2 P4 P5 K3 P6 K4 H1 H4 H5
Hardness/Rm < 1000 N/mm² < 35 HRC 35 - 45 HRC 45 - 55 HRC
ap x ae 0.05D x 0.2D 0.05D x 0.1D 0.05D x 0.1D 0.05D x 0.1D
Vc (m/min) 120-160 80-120 60-100 50-70
D
(mm)
D (e.)
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
1 0.44 40000 0.009 720 31850 0.008 520 25480 0.007 370 19110 0.006 240
1.5 0.79 29720 0.012 710 21230 0.011 460 16990 0.010 330 12740 0.008 210
2 1.20 22290 0.012 530 15920 0.011 340 12740 0.010 240 9550 0.008 160
2.5 1.65 17830 0.015 530 12740 0.014 340 10190 0.012 240 7640 0.011 160
3 2.14 14860 0.018 530 10620 0.016 340 8490 0.014 240 6370 0.013 160
4 3.20 11150 0.025 560 7960 0.023 360 6370 0.020 250 4780 0.018 170
5 4.33 8920 0.032 570 6370 0.029 370 5100 0.026 260 3820 0.022 170
6 5.50 7430 0.038 560 5310 0.034 360 4250 0.030 260 3180 0.027 170
8 7.84 5570 0.048 530 3980 0.043 340 3180 0.038 240 2390 0.034 160
10 10.00 4460 0.057 510 3180 0.051 330 2550 0.046 230 1910 0.040 150
12 11.76 3720 0.067 500 2650 0.060 320 2120 0.054 230 1590 0.047 150
14 12.83 3180 0.08 510 2270 0.072 330 1820 0.064 230 1360 0.056 150
16 12.80 2790 0.095 530 1990 0.086 340 1590 0.076 240 1190 0.067 160
18 10.80 2480 0.108 540 1770 0.097 340 1420 0.086 250 1060 0.076 160
20 12.00 2230 0.108 480 1590 0.097 310 1270 0.086 220 960 0.076 150
_
_
n
(rpm)
Vf
(mm/min)
15° x 1.1 x 1.1
MEX - 30÷55HRC - Ball nose
579
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
h stock standard f non-stock standard m stock exhaustion
MEXCLSB2
cylindrical shank, 2 flutes ball nose, long reach
OSAWA
NORM
<55
PMKNSH
++ +
+ 1st choice , suitable
COPYING
D D Tol. R R Tol. d(h6) l l1 L z EDP No. Stock
10/-0.012 0.50 +/-0.010 4 2.5 50 2 MEXCLSB2010 h
1.2 0/-0.030 0.60 0/-0.020 4 3 50 2 MEXCLSB2012 h
1.5 0/-0.012 0.75 +/-0.010 4 4 50 2 MEXCLSB2015 h
20/-0.012 1.00 +/-0.010 6 5 50 2 MEXCLSB2020 h
2.5 0/-0.012 1.25 +/-0.010 6 6 60 2 MEXCLSB2025 h
30/-0.012 1.50 +/-0.010 6 8 60 2 MEXCLSB2030 h
40/-0.012 2.00 +/-0.010 6 8 70 2 MEXCLSB2040 h
50/-0.012 2.50 +/-0.010 6 10 80 2 MEXCLSB2050 h
60/-0.012 3.00 +/-0.010 6 12 90 2 MEXCLSB2060 h
80/-0.015 4.00 +/-0.010 8 14 100 2 MEXCLSB2080 h
10 0/-0.015 5.00 +/-0.010 10 18 100 2 MEXCLSB2100 h
12 0/-0.015 6.00 +/-0.010 12 22 110 2 MEXCLSB2120 h
14 0/-0.030 7.00 0/-0.020 14 32 125 2 MEXCLSB2140 h
16 0/-0.030 8.00 0/-0.020 16 32 150 2 MEXCLSB2160 h
20 0/-0.030 10.00 0/-0.020 20 38 150 2 MEXCLSB2200 h
R
MEX - 30÷55HRC - Ball nose
580
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
CUTTING PARAMETERS
MEXCLSB2
_ 45°
Material
Group
ISO 513
P2 P3 P4 K1 K2 P4 P5 K3 P6 K4 H1 H4 H5
Hardness/Rm < 1000 N/mm² < 35 HRC 35 - 45 HRC 45 - 55 HRC
ap x ae 0.05D x 0.2D 0.05D x 0.2D 0.05D x 0.2D 0.05D x 0.2D
Vc (m/min) 100-140 80-120 60-80 40-60
D
(mm)
D (e.)
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
1 0.44 38220 0.015 1150 31850 0.014 860 22290 0.012 530 15920 0.011 330
2 0.87 19110 0.021 810 15920 0.019 610 11150 0.017 380 7960 0.015 240
3 1.31 12740 0.027 690 10620 0.024 520 7430 0.022 320 5310 0.019 200
4 1.74 9550 0.037 700 7960 0.033 520 5570 0.029 330 3980 0.026 200
5 2.18 7640 0.045 690 6370 0.041 520 4460 0.036 320 3180 0.032 200
6 2.62 6370 0.051 650 5310 0.046 490 3720 0.041 300 2650 0.036 190
8 3.49 4780 0.060 570 3980 0.054 430 2790 0.048 270 1990 0.042 170
10 4.36 3820 0.068 520 3180 0.061 390 2230 0.054 240 1590 0.048 150
12 5.23 3180 0.077 490 2650 0.069 360 1860 0.061 230 1330 0.054 140
14 6.10 2730 0.089 490 2270 0.080 360 1590 0.071 230 1140 0.062 140
16 6.97 2390 0.102 490 1990 0.092 370 1390 0.082 230 1000 0.071 140
18 7.85 2120 0.115 490 1770 0.103 370 1240 0.092 230 880 0.080 140
20 8.72 1910 0.132 500 1590 0.119 380 1110 0.106 230 800 0.092 150
COPYING
ae
ap
_
n
(rpm)
Vf
(mm/min)
30° x 0.8 x 0.8
15° x 0.7 x 0.7
0° x 0.6 x 0.6
MEX - 30÷55HRC - Ball nose
581
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
h stock standard f non-stock standard m stock exhaustion
D D Tol. R R Tol. d(h6) l l1 L z EDP No. Stock
10/-0.020 0.50 0/-0.020 4 3 75 2 MEX25301075 h
10/-0.020 0.50 0/-0.020 4 3 100 2 MEX253010100 h
1.5 0/-0.020 0.75 0/-0.020 4 3 75 2 MEX25301575 h
1.5 0/-0.020 0.75 0/-0.020 4 3 100 2 MEX253015100 h
20/-0.020 1.00 0/-0.020 4 4 75 2 MEX25302075 h
20/-0.020 1.00 0/-0.020 4 4 100 2 MEX253020100 h
30/-0.025 1.50 0/-0.020 6 5 75 2 MEX25303075 h
30/-0.025 1.50 0/-0.020 6 5 100 2 MEX253030 h
40/-0.025 2.00 0/-0.020 6 8 100 2 MEX253040 h
50/-0.025 2.50 0/-0.020 6 9 100 2 MEX253050100 h
60/-0.025 3.00 0/-0.020 6 10 150 2 MEX253060150 h
80/-0.030 4.00 0/-0.020 8 12 150 2 MEX253080 h
10 0/-0.030 5.00 0/-0.020 10 14 150 2 MEX25310150 h
12 0/-0.030 6.00 0/-0.020 12 16 150 2 MEX25312150 h
16 0/-0.030 8.00 0/-0.020 16 32 200 2 MEX253160 h
20 0/-0.030 10.00 0/-0.020 20 38 200 2 MEX253200 h
MEX253
cylindrical shank, 2 flutes ball nose, extra long reach
OSAWA
NORM
<55
PMKNSH
++ +
+ 1st choice , suitable
COPYING
R
MEX - 30÷55HRC - Ball nose
582
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
UH
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
CUTTING PARAMETERS
MEX253
_ 45°
Material
Group
ISO 513
P2 P3 P4 K1 K2 P4 P5 K3 P6 K4 H1 H4 H5
Hardness/Rm < 1000 N/mm² < 35 HRC 35 - 45 HRC 45 - 55 HRC
ap x ae 0.05D x 0.2D 0.05D x 0.2D 0.05D x 0.2D 0.05D x 0.2D
Vc (m/min) 90-130 60-100 50-70 30-50
D
(mm)
D (e.)
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
1 0.44 35030 0.015 1050 25480 0.014 690 19110 0.012 460 12740 0.011 270
2 0.87 17520 0.021 740 12740 0.019 490 9550 0.017 320 6370 0.015 190
3 1.31 11680 0.027 640 8490 0.024 420 6370 0.022 280 4250 0.019 160
4 1.74 8760 0.037 640 6370 0.033 420 4780 0.029 280 3180 0.026 160
5 2.18 7010 0.045 630 5100 0.041 410 3820 0.036 280 2550 0.032 160
6 2.62 5840 0.051 600 4250 0.046 390 3180 0.041 260 2120 0.036 150
8 3.49 4380 0.060 520 3180 0.054 340 2390 0.048 230 1590 0.042 130
10 4.36 3500 0.068 480 2550 0.061 310 1910 0.054 210 1270 0.048 120
12 5.23 2920 0.077 450 2120 0.069 290 1590 0.061 190 1060 0.054 110
14 6.10 2500 0.089 450 1820 0.080 290 1360 0.071 190 910 0.062 110
16 6.97 2190 0.102 450 1590 0.092 290 1190 0.082 190 800 0.071 110
18 7.85 1950 0.115 450 1420 0.103 290 1060 0.092 190 710 0.080 110
20 8.72 1750 0.132 460 1270 0.119 300 960 0.106 200 640 0.092 120
COPYING
ae
ap
_
n
(rpm)
Vf
(mm/min)
30° x 0.8 x 0.8
15° x 0.7 x 0.7
0° x 0.6 x 0.6
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
UH
UH
STEEL AND HARDENED STEEL < 70 HRC
Nano micrograin and UH RED TiSi base coating for high
performance milling on hardened steel up to 70 HRC. High
reliability and long life in dry milling operation adopting high
speed or high feed strategy. The cutting geometry has been
specifically designed to obtain high precision and high quality
surface finishing.
Nano micrograna e rivestimento UH RED a base TiSi
per la fresatura di materiali temprati sino a 70 HRC. Grande
affidabilità e durata nell’utilizzo di strategie di lavorazione ad
alta velocità o alto avanzamento e con la possibilità di evitare
l’utilizzo del refrigerante. Le geometrie di taglio specifiche
garantiscono elevata precisione ed eccellente finitura della
superficie lavorata.
Nano-Mikrokörnung und Beschichtung UH RED auf
TiSi-Basis für das Fräsen von gehärteten Materialien bis zu
70 HRC. Hohe Zuverlässigkeit und lange Standzeit auch
bei Bearbeitungsverfahren mit hoher Geschwindigkeit und
großem Vorschub und mit der Möglichkeit, ohne Kühlmittel
zu arbeiten. Die spezifischen Schnittgeometrien gewährleisten
eine hohe Präzision und eine hervorragende Endbearbeitung
der bearbeiteten Fläche.
Nano micrograin et revêtement UH RED à base TiSi pour le
fraisage de matériaux trempés jusqu’à 70 HRC. Grande fiabilité
et durée dans l’utilisation stratégique d’usinage à haute
vitesse ou avancement élevé et avec la possibilité d’éviter
l’utilisation de lubrifiant. Les géométries de coupe spécifiques
garantissent une précision élevée et une excellente finition de
la surface usinée.
Nano micrograno y revestimiento UH RED a base de TiSi
para el fresado de materiales templados hasta 70 HRC.
Gran fiabilidad y duración en la utilización de estrategias de
elaboración a alta velocidad o alto avance con la posibilidad
de evitar la utilización del refrigerante. Las geometrías de
corte específicas garantizan una elevada precisión y excelente
acabado de la superficie trabajada.
Микрозернистая наноструктура твердого сплава и покрытие
UH RED на основе TiSi служат для фрезерования закалённых
сталей с твёрдостью до 70 HRC. Высокая надёжность и
стойкость при работе с высокой скоростью резания и подачей
без использования СОЖ. Режущая геометрия специально
создана для достижения высокой точности и низкой
шероховатости обработанной поверхности.
UH - < 70HRC - Square
584
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
UH
h stock standard f non-standard stock m stock exhaustion
D D Tol. CR CR Tol. d(h6) l l1 L z EDP No. Stock
0.1 0/-0.020 4 0.2 40 2 UHM200104 h
0.2 0/-0.020 4 0.3 50 2 UHM200204 h
0.3 0/-0.020 4 0.4 50 2 UHM200304 h
0.4 0/-0.020 4 0.6 50 2 UHM200404 h
0.5 0/-0.020 4 0.7 50 2 UHM200504 h
0.6 0/-0.020 4 0.9 50 2 UHM200604 h
0.7 0/-0.020 4 1 50 2 UHM200704 h
0.8 0/-0.020 4 1.2 50 2 UHM200804 h
0.9 0/-0.020 4 1.4 50 2 UHM200904 h
UHM204
cylindrical shank, 2F, miniature
OSAWA
NORM
<70
PMKNSH
,, +
+ 1st choice , suitable
SLOTTING
UH - < 70HRC - Square
585
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
UH
CUTTING PARAMETERS
UHM204
SLOTTING
Material
Group
ISO 513
P3 P4 P5 K2 K3 P6 K4 H1 H4 H5 H2 H3
Hardness/Rm < 45 HRC 45 - 55 HRC 55 - 60 HRC 60 - 65 HRC
ap x ae ap x D ap x D ap x D ap x D
Vc (m/min) 80-120 60-100 50-70 30-50
D
(mm)
ap
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
0.1 0.01 40000 0.002 160 40000 0.002 140 40000 0.002 130 40000 0.001 110
0.2 0.01 40000 0.003 240 40000 0.003 220 40000 0.002 190 40000 0.002 170
0.3 0.02 40000 0.004 320 40000 0.004 290 40000 0.003 255 40000 0.003 225
0.4 0.02 40000 0.006 480 40000 0.005 430 40000 0.005 385 31850 0.004 270
0.5 0.03 40000 0.007 560 40000 0.006 500 38220 0.006 430 25480 0.005 250
0.6 0.03 40000 0.008 640 40000 0.007 580 31850 0.006 410 21230 0.006 240
0.8 0.04 39810 0.010 800 31850 0.009 570 23890 0.008 380 15920 0.007 225
0.9 0.05 35390 0.012 850 28310 0.011 610 21230 0.010 410 14150 0.008 240
UH - < 70HRC - Square
586
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
UH
h stock standard f non-standard stock m stock exhaustion
D D Tol. CR CR Tol. d(h6) l l1 d1 L z 30’ 1° 1°30’ 2° 3° EDP No. Stock
0.2 0/-0.020 4 0.3 0.5 0.16 50 2 0.57 0.59 0.61 0.63 0.68 UHLN2002005 h
0.2 0/-0.020 4 0.3 1 0.16 50 2 1.09 1.12 1.16 1.21 1.30 UHLN200201 h
0.2 0/-0.020 4 0.3 1.5 0.16 50 2 1.60 1.66 1.72 1.78 1.91 UHLN2002015 h
0.3 0/-0.020 4 0.4 1 0.26 50 2 1.09 1.12 1.16 1.21 1.30 UHLN200301 h
0.3 0/-0.020 4 0.4 2 0.26 50 2 2.12 2.19 2.27 2.35 2.53 UHLN200302 h
0.3 0/-0.020 4 0.4 3 0.26 50 2 3.15 3.26 3.38 3.50 3.76 UHLN200303 h
0.4 0/-0.020 4 0.6 2 0.37 50 2 2.12 2.19 2.27 2.35 2.53 UHLN200402 h
0.4 0/-0.020 4 0.6 3 0.37 50 2 3.15 3.26 3.38 3.50 3.76 UHLN200403 h
0.4 0/-0.020 4 0.6 4 0.37 50 2 4.19 4.33 4.49 4.65 5.00 UHLN200404 h
0.4 0/-0.020 4 0.6 5 0.37 50 2 5.22 5.40 5.59 5.79 6.23 UHLN200405 h
0.5 0/-0.020 4 0.7 2 0.45 50 2 2.16 2.23 2.31 2.40 2.57 UHLN200502 h
0.5 0/-0.020 4 0.7 4 0.45 50 2 4.23 4.37 4.53 4.69 5.04 UHLN200504 h
0.5 0/-0.020 4 0.7 6 0.45 50 2 6.29 6.51 6.74 6.98 7.51 UHLN200506 h
0.5 0/-0.020 4 0.7 8 0.45 50 2 8.36 8.65 8.96 9.28 9.98 UHLN200508 h
0.6 0/-0.020 4 0.9 2 0.55 50 2 2.16 2.23 2.31 2.40 2.57 UHLN200602 h
0.6 0/-0.020 4 0.9 4 0.55 50 2 4.23 4.37 4.53 4.69 5.04 UHLN200604 h
0.6 0/-0.020 4 0.9 6 0.55 50 2 6.29 6.51 6.74 6.98 7.51 UHLN200606 h
0.6 0/-0.020 4 0.9 8 0.55 50 2 8.36 8.65 8.96 9.28 9.98 UHLN200608 h
0.6 0/-0.020 4 0.9 10 0.55 50 2 10.43 10.79 11.17 11.57 12.44 UHLN200610 h
0.7 0/-0.020 4 1.0 2 0.65 50 2 2.16 2.23 2.31 2.40 2.57 UHLN200702 h
0.7 0/-0.020 4 1.0 4 0.65 50 2 4.23 4.37 4.53 4.69 5.04 UHLN200704 h
0.7 0/-0.020 4 1.0 6 0.65 50 2 6.29 6.51 6.74 6.98 7.51 UHLN200706 h
0.7 0/-0.020 4 1.0 8 0.65 50 2 8.36 8.65 8.96 9.28 9.98 UHLN200708 h
0.7 0/-0.020 4 1.0 10 0.65 50 2 10.43 10.79 11.17 11.57 12.44 UHLN200710 h
0.8 0/-0.020 4 1.2 4 0.75 50 2 4.23 4.37 4.53 4.69 5.04 UHLN200804 h
0.8 0/-0.020 4 1.2 6 0.75 50 2 6.29 6.51 6.74 6.98 7.51 UHLN200806 h
0.8 0/-0.020 4 1.2 8 0.75 50 2 8.36 8.65 8.96 9.28 9.98 UHLN200808 h
0.8 0/-0.020 4 1.2 10 0.75 50 2 10.43 10.79 11.17 11.57 12.44 UHLN200810 h
0.8 0/-0.020 4 1.2 12 0.75 50 2 12.49 12.93 13.38 13.87 14.91 UHLN200812 h
0.9 0/-0.020 4 1.4 6 0.85 50 2 6.29 6.51 6.74 6.98 7.51 UHLN200906 h
0.9 0/-0.020 4 1.4 8 0.85 50 2 8.36 8.65 8.96 9.28 9.98 UHLN200908 h
0.9 0/-0.020 4 1.4 10 0.85 50 2 10.43 10.79 11.17 11.57 12.44 UHLN200910 h
0.9 0/-0.020 4 1.4 15 0.85 50 2 15.6 16.14 16.71 17.31 18.61 UHLN200915 h
10/-0.020 4 1.5 6 0.95 50 2 6.39 6.61 6.84 7.09 7.62 UHLN201006 h
10/-0.020 4 1.5 8 0.95 50 2 8.46 8.75 9.06 9.38 10.09 UHLN201008 h
10/-0.020 4 1.5 10 0.95 50 2 10.52 10.89 11.27 11.68 12.56 UHLN201010 h
10/-0.020 4 1.5 12 0.95 50 2 12.59 13.03 13.49 13.97 15.02 UHLN201012 h
10/-0.020 4 1.5 14 0.95 50 2 14.66 15.17 15.70 16.27 17.49 UHLN201014 h
10/-0.020 4 1.5 16 0.95 50 2 16.73 17.30 17.92 18.56 19.96 UHLN201016 h
UHLN2
cylindrical shank, 2F, extended and reduced neck
OSAWA
NORM
<70
PMKNSH
,, +
+ 1st choice , suitable
SQUARE RIB
α
actual length
actual length according to _ angle
UH - < 70HRC - Square
587
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
UH
h stock standard f non-standard stock m stock exhaustion
D D Tol. CR CR Tol. d(h6) l l1 d1 L z 30’ 1° 1°30’ 2° 3° EDP No. Stock
1.2 0/-0.020 4 1.8 6 1.15 50 2 6.39 6.61 6.84 7.09 7.62 UHLN201206 h
1.2 0/-0.020 4 1.8 8 1.15 50 2 8.46 8.75 9.06 9.38 10.09 UHLN201208 h
1.2 0/-0.020 4 1.8 10 1.15 50 2 10.52 10.89 11.27 11.68 12.56 UHLN201210 h
1.2 0/-0.020 4 1.8 12 1.15 50 2 12.59 13.03 13.49 13.97 15.02 UHLN201212 h
1.4 0/-0.020 4 2.1 6 1.35 50 2 6.39 6.61 6.84 7.09 7.62 UHLN201406 h
1.4 0/-0.020 4 2.1 8 1.35 50 2 8.46 8.75 9.06 9.38 10.09 UHLN201408 h
1.4 0/-0.020 4 2.1 10 1.35 50 2 10.52 10.89 11.27 11.68 12.56 UHLN201410 h
1.4 0/-0.020 4 2.1 12 1.35 50 2 12.59 13.03 13.49 13.97 15.02 UHLN201412 h
1.4 0/-0.020 4 2.1 14 1.35 50 2 14.66 15.17 15.70 16.27 17.49 UHLN201414 h
1.4 0/-0.020 4 2.1 16 1.35 50 2 16.73 17.30 17.92 18.56 19.96 UHLN201416 h
1.5 0/-0.020 4 2.3 6 1.45 50 2 6.39 6.61 6.84 7.09 7.62 UHLN201506 h
1.5 0/-0.020 4 2.3 8 1.45 50 2 8.46 8.75 9.06 9.38 10.09 UHLN201508 h
1.5 0/-0.020 4 2.3 10 1.45 50 2 10.52 10.89 11.27 11.68 12.56 UHLN201510 h
1.5 0/-0.020 4 2.3 12 1.45 50 2 12.59 13.03 13.49 13.97 15.02 UHLN201512 h
1.5 0/-0.020 4 2.3 14 1.45 50 2 14.66 15.17 15.7 16.27 17.49 UHLN201514 h
1.5 0/-0.020 4 2.3 16 1.45 50 2 16.73 17.30 17.92 18.56 19.96 UHLN201516 h
1.5 0/-0.020 4 2.3 18 1.45 60 2 18.79 19.44 20.13 20.86 22.43 UHLN201518 h
1.5 0/-0.020 4 2.3 20 1.45 60 2 20.86 21.58 22.35 23.15 - UHLN201520 h
1.6 0/-0.020 4 2.4 6 1.55 50 2 6.39 6.61 6.84 7.09 7.62 UHLN201606 h
1.6 0/-0.020 4 2.4 8 1.55 50 2 8.46 8.75 9.06 9.38 10.09 UHLN201608 h
1.6 0/-0.020 4 2.4 10 1.55 50 2 10.52 10.89 11.27 11.68 12.56 UHLN201610 h
1.6 0/-0.020 4 2.4 12 1.55 50 2 12.59 13.03 13.49 13.97 15.02 UHLN201612 h
1.6 0/-0.020 4 2.4 14 1.55 50 2 14.66 15.17 15.70 16.27 17.49 UHLN201614 h
1.6 0/-0.020 4 2.4 16 1.55 50 2 16.73 17.30 17.92 18.56 19.96 UHLN201616 h
1.6 0/-0.020 4 2.4 18 1.55 60 2 18.79 19.44 20.13 20.86 22.43 UHLN201618 h
1.6 0/-0.020 4 2.4 20 1.55 60 2 20.86 21.58 22.35 23.15 - UHLN201620 h
1.8 0/-0.020 4 2.7 6 1.75 50 2 6.39 6.61 6.84 7.09 7.62 UHLN201806 h
1.8 0/-0.020 4 2.7 8 1.75 50 2 8.46 8.75 9.06 9.38 10.09 UHLN201808 h
1.8 0/-0.020 4 2.7 10 1.75 50 2 10.52 10.89 11.27 11.68 12.56 UHLN201810 h
1.8 0/-0.020 4 2.7 12 1.75 50 2 12.59 13.03 13.49 13.97 15.02 UHLN201812 h
1.8 0/-0.020 4 2.7 14 1.75 50 2 14.66 15.17 15.70 16.27 17.49 UHLN201814 h
1.8 0/-0.020 4 2.7 16 1.75 50 2 16.73 17.30 17.92 18.56 19.96 UHLN201816 h
1.8 0/-0.020 4 2.7 18 1.75 60 2 18.79 19.44 20.13 20.86 - UHLN201818 h
1.8 0/-0.020 4 2.7 20 1.75 60 2 20.86 21.58 22.35 23.15 - UHLN201820 h
20/-0.020 4 3 6 1.95 50 2 6.39 6.61 6.84 7.09 7.62 UHLN202006 h
20/-0.020 4 3 8 1.95 50 2 8.46 8.75 9.06 9.38 10.09 UHLN202008 h
20/-0.020 4 3 10 1.95 50 2 10.52 10.89 11.27 11.68 12.56 UHLN202010 h
20/-0.020 4 3 12 1.95 50 2 12.59 13.03 13.49 13.97 15.02 UHLN202012 h
20/-0.020 4 3 14 1.95 50 2 14.66 15.17 15.70 16.27 17.49 UHLN202014 h
UHLN2
cylindrical shank, 2F, extended and reduced neck
OSAWA
NORM
<70
PMKNSH
,, +
+ 1st choice , suitable
SQUARE RIB
α
actual length
actual length according to _ angle
UH - < 70HRC - Square
588
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
UH
h stock standard f non-standard stock m stock exhaustion
D D Tol. CR CR Tol. d(h6) l l1 d1 L z 30’ 1° 1°30’ 2° 3° EDP No. Stock
20/-0.020 4 3 16 1.95 50 2 16.73 17.30 17.92 18.56 - UHLN202016 h
20/-0.020 4 3 18 1.95 60 2 18.79 19.44 20.13 20.86 - UHLN202018 h
20/-0.020 4 3 20 1.95 60 2 20.86 21.58 22.35 23.15 - UHLN202020 h
20/-0.020 4 3 25 1.95 75 2 26.03 26.93 27.88 - - UHLN202025 h
20/-0.020 4 3 30 1.95 75 2 31.2 32.28 33.42 - - UHLN202030 h
2.5 0/-0.020 4 3.7 8 2.4 50 2 8.46 8.75 9.06 9.38 10.09 UHLN202508 h
2.5 0/-0.020 4 3.7 10 2.4 50 2 10.52 10.89 11.27 11.68 12.56 UHLN202510 h
2.5 0/-0.020 4 3.7 12 2.4 50 2 12.59 13.03 13.49 13.97 - UHLN202512 h
2.5 0/-0.020 4 3.7 14 2.4 50 2 14.66 15.17 15.70 16.27 - UHLN202514 h
2.5 0/-0.020 4 3.7 16 2.4 50 2 16.73 17.30 17.92 18.56 - UHLN202516 h
2.5 0/-0.020 4 3.7 18 2.4 60 2 18.79 19.44 20.13 20.86 - UHLN202518 h
2.5 0/-0.020 4 3.7 20 2.4 60 2 20.86 21.58 22.35 - - UHLN202520 h
2.5 0/-0.020 4 3.7 25 2.4 75 2 24.1 24.94 25.83 - - UHLN202525 h
2.5 0/-0.020 4 3.7 30 2.4 75 2 31.2 32.28 - - - UHLN202530 h
30/-0.025 6 4.5 8 2.85 50 2 8.65 8.95 9.26 9.60 10.31 UHLN203008 h
30/-0.025 6 4.5 10 2.85 50 2 10.72 11.09 11.48 11.89 12.78 UHLN203010 h
30/-0.025 6 4.5 12 2.85 50 2 12.78 13.23 13.69 14.18 15.25 UHLN203012 h
30/-0.025 6 4.5 14 2.85 50 2 14.85 15.36 15.91 16.48 17.72 UHLN203014 h
30/-0.025 6 4.5 16 2.85 60 2 16.92 17.50 18.12 18.77 20.18 UHLN203016 h
30/-0.025 6 4.5 18 2.85 60 2 18.99 19.64 20.34 21.07 22.65 UHLN203018 h
30/-0.025 6 4.5 20 2.85 60 2 21.05 21.78 22.55 23.36 25.12 UHLN203020 h
30/-0.025 6 4.5 25 2.85 75 2 26.22 27.13 28.09 29.10 - UHLN203025 h
40/-0.025 6 4.5 10 3.85 60 2 10.91 11.29 11.68 12.10 13.00 UHLN204010 h
40/-0.025 6 4.5 15 3.85 60 2 16.08 16.63 17.22 17.84 19.17 UHLN204015 h
40/-0.025 6 4.5 20 3.85 60 2 21.25 21.98 22.76 23.57 - UHLN204020 h
40/-0.025 6 4.5 25 3.85 75 2 26.41 27.33 28.29 - - UHLN204025 h
40/-0.025 6 4.5 30 3.85 75 2 31.58 32.67 33.83 - - UHLN204030 h
40/-0.025 6 4.5 40 3.85 75 2 41.92 43.37 - - - UHLN204040 h
UHLN2
cylindrical shank, 2F, extended and reduced neck
OSAWA
NORM
<70
PMKNSH
,, +
+ 1st choice , suitable
SQUARE RIB
α
actual length
actual length according to _ angle
UH - < 70HRC - Square
589
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
UH
CUTTING PARAMETERS
UHLN2
SQUARE RIB
Material Group
ISO 513 P3 P4 P5 K2 K3 P6 K4 H1 H4 H5 H2 H3
Hardness/Rm < 45 HRC 45 - 55 HRC 55 - 60 HRC 60 - 65 HRC
ap x ae ap x D ap x D ap x D ap x D
Vc (m/min) 80-120 60-100 50-70 30-50
D
(mm)
l1
(mm)
ap
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
0.2
≤ 6D 0.01 40000 0.003 240 40000 0.003 220 40000 0.002 190 40000 0.002 170
≤ 8D 0.01 40000 0.003 200 40000 0.002 180 40000 0.002 165 40000 0.002 145
≤ 10D 0.01 40000 0.002 170 40000 0.002 150 40000 0.002 135 40000 0.001 120
≤ 12D 0.01 40000 0.002 130 40000 0.001 120 40000 0.001 105 40000 0.001 90
0.3
≤ 6D 0.02 40000 0.004 320 40000 0.004 290 40000 0.003 255 40000 0.003 225
≤ 8D 0.01 40000 0.003 270 40000 0.003 240 40000 0.003 220 38200 0.002 180
≤ 10D 0.01 40000 0.003 220 40000 0.003 200 40000 0.002 180 34000 0.002 135
≤ 12D 0.01 40000 0.002 180 40000 0.002 160 40000 0.002 140 29700 0.002 90
0.4
≤ 6D 0.02 40000 0.006 480 40000 0.005 430 40000 0.005 385 31800 0.004 265
≤ 8D 0.02 40000 0.005 410 40000 0.005 370 40000 0.004 325 28700 0.004 205
≤ 10D 0.01 40000 0.004 340 40000 0.004 300 38200 0.003 255 25500 0.003 150
≤ 12D 0.01 40000 0.003 260 40000 0.003 240 33400 0.003 175 22300 0.002 105
0.5
≤ 6D 0.03 40000 0.007 560 40000 0.006 500 38200 0.006 430 25500 0.005 250
≤ 8D 0.02 40000 0.006 480 40000 0.005 430 34400 0.005 325 22900 0.004 190
≤ 10D 0.02 40000 0.005 390 40000 0.004 350 30600 0.004 240 20400 0.003 140
≤ 12D 0.01 35000 0.004 270 35700 0.003 250 26800 0.003 165 17800 0.003 95
0.6
≤ 6D 0.03 40000 0.008 640 40000 0.007 580 31800 0.006 405 21200 0.006 235
≤ 8D 0.03 40000 0.007 540 38200 0.006 470 28700 0.005 310 19100 0.005 180
≤ 10D 0.02 40000 0.006 450 34000 0.005 340 25500 0.004 230 17000 0.004 135
≤ 12D 0.02 37200 0.004 330 29700 0.004 240 22300 0.004 155 14900 0.003 90
0.8
≤ 6D 0.04 39800 0.010 800 31800 0.009 570 23900 0.008 380 15900 0.007 225
≤ 8D 0.03 35800 0.009 610 28700 0.008 440 21500 0.007 290 14300 0.006 170
≤ 10D 0.03 31800 0.007 450 25500 0.006 320 19100 0.006 215 12700 0.005 125
≤ 12D 0.02 27900 0.006 310 22300 0.005 220 16700 0.004 145 11100 0.004 85
1
≤ 6D 0.05 31800 0.012 760 25500 0.011 550 19100 0.010 365 12700 0.008 215
≤ 8D 0.04 28700 0.010 590 22900 0.009 420 17200 0.008 280 11500 0.007 165
≤ 10D 0.04 25500 0.008 430 20400 0.008 310 15300 0.007 205 10200 0.006 120
≤ 12D 0.03 22300 0.007 290 17800 0.006 210 13400 0.005 140 8900 0.005 80
1.2
≤ 6D 0.06 26500 0.022 1170 21200 0.020 840 15900 0.018 560 10600 0.015 325
≤ 8D 0.05 23900 0.019 890 19120 0.017 640 14340 0.015 430 9560 0.013 250
≤ 10D 0.04 21200 0.015 650 16960 0.014 470 12720 0.012 315 8480 0.011 185
≤ 12D 0.03 18600 0.012 450 14880 0.011 320 11160 0.010 215 7440 0.008 125
1.4
≤ 6D 0.07 22700 0.024 1090 18160 0.022 780 13620 0.019 525 9080 0.017 305
≤ 8D 0.06 20500 0.020 840 16400 0.018 600 12300 0.016 400 8200 0.014 235
≤ 10D 0.05 18200 0.017 610 14560 0.015 440 10920 0.013 295 7280 0.012 170
≤ 12D 0.04 15900 0.013 420 12720 0.012 300 9540 0.011 200 6360 0.009 120
≤ 15D 0.03 13600 0.011 290 10880 0.010 210 8160 0.009 140 5440 0.008 80
> 15D 0.02 11400 0.007 160 9120 0.006 120 6840 0.006 80 4560 0.005 45
1.5
≤ 6D 0.08 21200 0.025 1060 16960 0.023 760 12720 0.020 510 8480 0.018 295
≤ 8D 0.06 19100 0.021 810 15280 0.019 580 11460 0.017 390 7640 0.015 225
≤ 10D 0.05 17000 0.018 590 13600 0.016 430 10200 0.014 285 6800 0.012 165
≤ 12D 0.04 14900 0.014 410 11920 0.012 300 8940 0.011 195 5960 0.010 115
≤ 15D 0.03 12700 0.011 290 10160 0.010 210 7620 0.009 135 5080 0.008 80
> 15D 0.02 10600 0.008 160 8480 0.007 110 6360 0.006 75 4240 0.005 45
1.6
≤ 6D 0.08 19900 0.026 1030 15920 0.023 750 11940 0.021 495 7960 0.018 290
≤ 8D 0.07 17900 0.022 790 14320 0.020 570 10740 0.018 380 7160 0.015 220
≤ 10D 0.06 15900 0.018 580 12720 0.016 420 9540 0.015 280 6360 0.013 160
≤ 12D 0.04 13900 0.014 400 11120 0.013 290 8340 0.011 190 5560 0.010 110
≤ 15D 0.04 11900 0.012 280 9520 0.011 200 7140 0.009 135 4760 0.008 80
> 15D 0.02 10000 0.008 160 8000 0.007 110 6000 0.006 75 4000 0.005 45
UH - < 70HRC - Square
590
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
UH
CUTTING PARAMETERS
UHLN2
SQUARE RIB
Material Group
ISO 513 P3 P4 P5 K2 K3 P6 K4 H1 H4 H5 H2 H3
Hardness/Rm < 45 HRC 45 - 55 HRC 55 - 60 HRC 60 - 65 HRC
ap x ae ap x D ap x D ap x D ap x D
Vc (m/min) 80-120 60-100 50-70 30-50
D
(mm)
l1
(mm)
ap
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
1.8
≤ 6D 0.09 17700 0.028 990 14160 0.025 710 10620 0.022 475 7080 0.020 280
≤ 8D 0.08 15900 0.024 760 12720 0.021 540 9540 0.019 365 6360 0.017 210
≤ 10D 0.06 14200 0.020 560 11360 0.018 400 8520 0.016 265 5680 0.014 155
≤ 12D 0.05 12400 0.015 380 9920 0.014 270 7440 0.012 185 4960 0.011 105
≤ 15D 0.04 10600 0.013 270 8480 0.011 190 6360 0.010 130 4240 0.009 75
> 15D 0.03 8800 0.008 150 7040 0.008 110 5280 0.007 70 3520 0.006 40
2
≤ 6D 0.10 15900 0.030 950 12720 0.027 690 9540 0.024 460 6360 0.021 265
≤ 8D 0.09 14300 0.026 730 11440 0.023 530 8580 0.020 350 5720 0.018 205
≤ 10D 0.07 12700 0.021 530 10160 0.019 380 7620 0.017 255 5080 0.015 150
≤ 12D 0.06 11100 0.017 370 8880 0.015 260 6660 0.013 175 4440 0.012 105
≤ 15D 0.05 9600 0.014 260 7680 0.012 190 5760 0.011 125 3840 0.009 75
> 15D 0.03 9600 0.009 170 7680 0.008 120 5760 0.007 85 3840 0.006 50
2.5
≤ 6D 0.13 12700 0.035 890 10160 0.032 640 7620 0.028 425 5080 0.025 250
≤ 8D 0.11 11500 0.030 680 9200 0.027 490 6900 0.024 330 4600 0.021 190
≤ 10D 0.09 10200 0.025 500 8160 0.022 360 6120 0.020 240 4080 0.017 140
≤ 12D 0.07 8900 0.019 340 7120 0.017 250 5340 0.015 165 3560 0.013 95
≤ 15D 0.06 7600 0.016 240 6080 0.014 170 4560 0.013 115 3040 0.011 65
> 15D 0.04 7600 0.011 160 6080 0.009 110 4560 0.008 75 3040 0.007 45
3
≤ 6D 0.15 10600 0.040 850 8480 0.036 610 6360 0.032 405 4240 0.028 235
≤ 8D 0.13 9600 0.034 650 7680 0.031 470 5760 0.027 315 3840 0.024 185
≤ 10D 0.11 8500 0.028 480 6800 0.025 340 5100 0.022 230 3400 0.020 135
≤ 12D 0.08 7400 0.022 330 5920 0.020 230 4440 0.018 155 2960 0.015 90
≤ 15D 0.07 6400 0.018 230 5120 0.016 170 3840 0.014 110 2560 0.013 65
> 15D 0.05 6400 0.012 150 5120 0.011 110 3840 0.010 75 2560 0.008 45
4
≤ 6D 0.20 8000 0.050 800 6400 0.045 580 4800 0.040 385 3200 0.035 225
≤ 8D 0.17 7200 0.043 610 5760 0.038 440 4320 0.034 295 2880 0.030 170
≤ 10D 0.14 6400 0.035 450 5120 0.032 320 3840 0.028 215 2560 0.025 125
≤ 12D 0.11 5600 0.028 310 4480 0.025 220 3360 0.022 150 2240 0.019 85
≤ 15D 0.09 4800 0.023 220 3840 0.020 160 2880 0.018 105 1920 0.016 60
> 15D 0.06 4800 0.015 140 3840 0.014 100 2880 0.012 70 1920 0.011 40
UH - < 70HRC - Square
591
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
UH
h stock standard f non-standard stock m stock exhaustion
D D Tol. CR CR Tol. d(h6) l l1 L z EDP No. Stock
30/-0.025 6 8 50 6 UH600030 h
40/-0.025 6 11 50 6 UH600040 h
50/-0.025 6 13 50 6 UH600050 h
60/-0.025 6 20 60 6 UH600060 h
80/-0.030 8 20 64 6 UH600080 h
10 0/-0.030 10 22 70 6 UH600100 h
12 0/-0.030 12 25 75 6 UH600120 h
14 0/-0.030 14 30 90 6 UH600140 h
16 0/-0.030 16 30 90 8 UH600160 h
20 0/-0.030 20 38 100 8 UH600200 h
UH600
cylindrical shank, multi flute
OSAWA
NORM
<70
PMKNSH
,, +
+ 1st choice , suitable
SIDE MILLING
UH - < 70HRC - Square
592
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
UH
CUTTING PARAMETERS
UH600
SIDE MILLING
Material
Group
ISO 513
P3 P4 P5 K2 K3 P6 K4 H1 H4 H5 H2 H3
Hardness/Rm < 45 HRC 45 - 55 HRC 55 - 60 HRC 60 - 65 HRC
ap x ae 1.5D x 0.1D 1.5D x 0.05D 1.5D x 0.05D 1.5D x 0.05D
Vc (m/min) 140-180 100-140 80-100 60-80
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
316990 0.008 860 12740 0.008 580 9550 0.007 390 7430 0.006 260
412740 0.012 920 9550 0.011 620 7170 0.010 410 5570 0.008 280
510190 0.014 880 7640 0.013 590 5730 0.012 400 4460 0.010 270
68490 0.018 920 6370 0.016 620 4780 0.014 410 3720 0.013 280
86370 0.028 1050 4780 0.025 710 3580 0.022 470 2790 0.019 320
10 5100 0.034 1030 3820 0.030 690 2870 0.027 460 2230 0.024 310
12 4250 0.041 1040 3180 0.037 700 2390 0.033 470 1860 0.029 320
14 3640 0.048 1050 2730 0.043 710 2050 0.038 470 1590 0.034 320
16 3180 0.056 1080 2390 0.051 730 1790 0.045 480 1390 0.039 330
18 2830 0.066 1120 2120 0.059 760 1590 0.053 500 1240 0.046 340
20 2550 0.078 1190 1910 0.070 800 1430 0.062 540 1110 0.055 360
UH - < 70HRC - Square
593
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
UH
h stock standard f non-standard stock m stock exhaustion
D D Tol. CR CR Tol. d(h6) l l1 d1 L z EDP No. Stock
30/-0.025 6 19 30 2.80 75 6 UH612030 h
40/-0.025 6 19 32 3.70 75 6 UH612040 h
50/-0.025 6 19 32 4.60 75 6 UH612050 h
60/-0.025 6 38 60 5.50 100 6 UH612060 h
80/-0.030 8 41 60 7.40 100 6 UH612080 h
10 0/-0.030 10 57 85 9.20 125 6 UH612100 h
12 0/-0.030 12 75 110 11.00 150 6 UH612120 h
16 0/-0.030 16 75 110 15.00 150 8 UH612160 h
20 0/-0.030 20 75 110 19.00 150 8 UH612200 h
UH612
cylindrical shank, multi flute, long
OSAWA
NORM
<70
PMKNSH
,, +
+ 1st choice , suitable
SIDE MILLING
UH - < 70HRC - Square
594
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
UH
CUTTING PARAMETERS
UH612
SIDE MILLING
Material
Group
ISO 513
P3 P4 P5 K2 K3 P6 K4 H1 H4 H5 H2 H3
Hardness/Rm < 45 HRC 45 - 55 HRC 55 - 60 HRC 60 - 65 HRC
ap x ae 1.5D x 0.05D 1.5D x 0.05D 1.5D x 0.05D 1.5D x 0.05D
Vc (m/min) 90-130 70-110 50-70 20-40
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
311680 0.007 500 9550 0.006 370 6370 0.006 220 3180 0.005 100
48760 0.010 540 7170 0.009 390 4780 0.008 230 2390 0.007 100
57010 0.012 510 5730 0.011 380 3820 0.010 220 1910 0.009 100
65840 0.015 540 4780 0.014 390 3180 0.012 230 1590 0.011 100
84380 0.023 620 3580 0.021 450 2390 0.019 270 1190 0.016 120
10 3500 0.029 600 2870 0.026 440 1910 0.023 260 960 0.020 120
12 2920 0.035 610 2390 0.031 450 1590 0.028 260 800 0.024 120
14 2500 0.041 610 2050 0.037 450 1360 0.033 270 680 0.029 120
16 2190 0.048 630 1790 0.043 460 1190 0.038 270 600 0.034 120
18 1950 0.056 660 1590 0.050 480 1060 0.045 290 530 0.039 120
20 1750 0.066 700 1430 0.060 510 960 0.053 310 480 0.046 130
UH - < 70HRC - Corner radius
595
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
UH
h stock standard f non-standard stock m stock exhaustion
D D Tol. CR CR Tol. d(h6) l l1 L z EDP No. Stock
0.3 0/-0.012 6 0.45 50 2 UHM200306 h
0.4 0/-0.012 6 0.6 50 2 UHM200406 h
0.5 0/-0.012 0.05 +/-0.010 6 0.7 50 2 UHM200506 h
0.6 0/-0.012 0.05 +/-0.010 6 0.9 50 2 UHM200606 h
0.8 0/-0.012 0.05 +/-0.010 6 1.2 50 2 UHM200806 h
10/-0.012 0.10 +/-0.010 6 1.5 50 2 UHM201006 h
1.5 0/-0.012 0.15 +/-0.010 6 2.2 50 2 UHM201506 h
20/-0.012 0.15 +/-0.010 6 2.2 50 2 UHM202006 h
UHM206
cylindrical shank, 2F, miniature, 6mm. shank
OSAWA
NORM
<70
< Ø0.5 ≤ Ø0.5
PMKNSH
,, +
+ 1st choice , suitable
SLOTTING
CR
CR
UH - < 70HRC - Corner radius
596
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
UH
CUTTING PARAMETERS
UHM206
SLOTTING
Material
Group
ISO 513
P3 P4 P5 K2 K3 P6 K4 H1 H4 H5 H2 H3
Hardness/Rm < 45 HRC 45 - 55 HRC 55 - 60 HRC 60 - 65 HRC
ap x ae ap x D ap x D ap x D ap x D
Vc (m/min) 80-120 60-100 50-70 30-50
D
(mm)
ap
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
0.3 0.02 40000 0.004 320 40000 0.004 290 40000 0.003 255 40000 0.003 225
0.4 0.02 40000 0.006 480 40000 0.005 430 40000 0.005 385 31850 0.004 270
0.5 0.03 40000 0.007 560 40000 0.006 500 38220 0.006 430 25480 0.005 250
0.6 0.03 40000 0.008 640 40000 0.007 580 31850 0.006 410 21230 0.006 240
0.8 0.04 39810 0.010 800 31850 0.009 570 23890 0.008 380 15920 0.007 225
1 0.05 31850 0.012 760 25480 0.011 550 19110 0.010 365 12740 0.008 215
1.5 0.08 21230 0.025 1060 16990 0.023 760 12740 0.020 510 8490 0.018 295
2 0.10 15920 0.030 960 12740 0.027 690 9550 0.024 460 6370 0.021 270
UH - < 70HRC - Corner radius
597
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
UH
h stock standard f non-standard stock m stock exhaustion
D D Tol. CR CR Tol. d(h6) l l1 d1 L z 30’ 1° 1°30’ 2° 3° EDP No. Stock
10/-0.012 0.10 +/-0.010 4 2 4 0.95 50 2 4.36 4.60 4.86 5.16 5.89 UH2110100104 h
10/-0.012 0.10 +/-0.010 4 2 6 0.95 50 2 6.46 6.82 7.21 7.66 8.74 UH2110100106 h
10/-0.012 0.10 +/-0.010 4 2 8 0.90 50 2 8.45 8.73 9.00 9.27 9.81 UH2110100108 h
10/-0.012 0.20 +/-0.010 4 2 4 0.95 50 2 4.36 4.60 4.86 5.16 5.89 UH2110100204 h
10/-0.012 0.20 +/-0.010 4 2 8 0.95 50 2 8.57 9.04 9.56 10.15 11.18 UH2110100208 h
10/-0.012 0.30 +/-0.010 4 2 4 0.90 50 2 4.31 4.44 4.57 4.70 4.97 UH2110100304 h
10/-0.012 0.30 +/-0.010 4 2 8 0.95 50 2 8.57 9.04 9.56 10.15 11.18 UH2110100308 h
1.5 0/-0.012 0.10 +/-0.010 4 2.5 6 1.45 50 2 6.30 6.52 6.75 7.01 7.57 UH2110150106 h
1.5 0/-0.012 0.10 +/-0.010 4 2.5 10 1.45 50 2 10.43 10.8 11.19 11.61 12.55 UH2110150110 h
1.5 0/-0.012 0.20 +/-0.010 4 2.5 8 1.45 50 2 8.37 8.66 8.97 9.31 10.06 UH2110150208 h
1.5 0/-0.012 0.20 +/-0.010 4 2.5 12 1.45 50 2 12.50 12.94 13.40 13.91 15.03 UH2110150212 h
20/-0.012 0.10 +/-0.010 4 3 6 1.95 50 2 6.30 6.52 6.75 7.01 7.57 UH2110200106 h
20/-0.012 0.10 +/-0.010 4 3 12 1.95 50 2 12.50 12.94 13.40 13.91 15.03 UH2110200112 h
20/-0.012 0.20 +/-0.010 4 3 6 1.95 50 2 6.30 6.52 6.75 7.01 7.57 UH2110200206 h
20/-0.012 0.20 +/-0.010 4 3 12 1.95 50 2 12.50 12.94 13.40 13.91 15.03 UH2110200212 h
20/-0.012 0.30 +/-0.010 4 3 8 1.95 50 2 8.37 8.66 8.97 9.31 10.06 UH2110200308 h
20/-0.012 0.30 +/-0.010 4 3 12 1.95 50 2 12.50 12.94 13.40 13.91 15.03 UH2110200312 h
20/-0.012 0.30 +/-0.010 4 3 16 1.95 50 2 16.64 17.21 17.84 18.50 - UH2110200316 h
20/-0.012 0.50 +/-0.010 4 3 6 1.95 50 2 6.30 6.52 6.75 7.01 7.57 UH2110200506 h
20/-0.012 0.50 +/-0.010 4 3 12 1.95 50 2 12.50 12.94 13.40 13.91 15.03 UH2110200512 h
30/-0.012 0.30 +/-0.010 6 4.5 10 2.80 55 2 10.71 11.04 11.38 11.72 12.40 UH2110300310 h
30/-0.012 0.30 +/-0.010 6 4.5 16 2.85 55 2 16.83 17.41 18.04 18.72 20.24 UH2110300316 h
30/-0.012 0.50 +/-0.010 6 4.5 10 2.85 55 2 10.63 11.00 11.39 11.82 12.78 UH2110300510 h
30/-0.012 0.50 +/-0.010 6 4.5 16 2.85 55 2 16.83 17.41 18.04 18.72 20.24 UH2110300516 h
40/-0.012 0.20 +/-0.010 6 6 20 3.85 60 2 20.96 21.69 22.48 23.32 - UH2110400220 h
40/-0.012 0.30 +/-0.010 6 6 12 3.85 55 2 12.69 13.14 13.61 14.12 15.27 UH2110400312 h
40/-0.012 0.30 +/-0.010 6 6 20 3.85 60 2 20.96 21.69 22.48 23.32 - UH2110400320 h
40/-0.012 0.50 +/-0.010 6 6 12 3.85 55 2 12.69 13.14 13.61 14.12 15.27 UH2110400512 h
40/-0.012 0.50 +/-0.010 6 6 20 3.85 60 2 20.96 21.69 22.48 23.32 - UH2110400520 h
40/-0.012 1.00 +/-0.010 6 6 16 3.85 55 2 16.83 17.41 18.04 18.72 - UH2110401016 h
60/-0.015 0.50 +/-0.015 6 9 15 5.85 60 2 - - - - - UH2110600520 h
60/-0.015 1.00 +/-0.015 6 9 15 5.85 60 2 - - - - - UH2110601020 h
60/-0.015 2.00 +/-0.015 6 9 15 5.85 60 2 - - - - - UH2110602020 h
UH211
cylindrical shank, 2F, extended and reduced neck,
corner radius
OSAWA
NORM
<70
PMKNSH
,, +
+ 1st choice , suitable
SQUARE RIB
CR CR
α
actual length
actual length according to _ angle
UH - < 70HRC - Corner radius
598
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
UH
CUTTING PARAMETERS
UH211
SQUARE RIB
Material Group
ISO 513 P3 P4 P5 K2 K3 P6 K4 H1 H4 H5 H2 H3
Hardness/Rm < 45 HRC 45 - 55 HRC 55 - 60 HRC 60 - 65 HRC
ap x ae ap x D ap x D ap x D ap x D
Vc (m/min) 80-120 60-100 50-70 30-50
D
(mm)
l1
(mm)
ap
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
1
≤ 6D 0.05 30000 0.012 720 24000 0.011 520 18000 0.010 345 12000 0.008 200
≤ 8D 0.04 28700 0.010 590 22960 0.009 420 17220 0.008 280 11480 0.007 165
≤ 10D 0.04 25500 0.008 430 20400 0.008 310 15300 0.007 205 10200 0.006 120
≤ 12D 0.03 22300 0.007 290 17840 0.006 210 13380 0.005 140 8920 0.005 80
1.5
≤ 6D 0.08 21200 0.025 1060 16960 0.023 760 12720 0.020 510 8480 0.018 295
≤ 8D 0.06 19100 0.021 810 15280 0.019 580 11460 0.017 390 7640 0.015 225
≤ 10D 0.05 17000 0.018 590 13600 0.016 430 10200 0.014 285 6800 0.012 165
≤ 12D 0.04 14900 0.014 410 11920 0.012 300 8940 0.011 195 5960 0.010 115
≤ 15D 0.03 12700 0.011 290 10160 0.010 210 7620 0.009 135 5080 0.008 80
> 15D 0.02 10600 0.008 160 8480 0.007 110 6360 0.006 75 4240 0.005 45
2
≤ 6D 0.10 15900 0.030 950 12720 0.027 690 9540 0.024 460 6360 0.021 265
≤ 8D 0.09 14300 0.026 730 11440 0.023 530 8580 0.020 350 5720 0.018 205
≤ 10D 0.07 12700 0.021 530 10160 0.019 380 7620 0.017 255 5080 0.015 150
≤ 12D 0.06 11100 0.017 370 8880 0.015 260 6660 0.013 175 4440 0.012 105
≤ 15D 0.05 9600 0.014 260 7680 0.012 190 5760 0.011 125 3840 0.009 75
> 15D 0.03 9600 0.009 170 7680 0.008 120 5760 0.007 85 3840 0.006 50
2.5
≤ 6D 0.13 12700 0.035 890 10160 0.032 640 7620 0.028 425 5080 0.025 250
≤ 8D 0.11 11500 0.030 680 9200 0.027 490 6900 0.024 330 4600 0.021 190
≤ 10D 0.09 10200 0.025 500 8160 0.022 360 6120 0.020 240 4080 0.017 140
≤ 12D 0.07 8900 0.019 340 7120 0.017 250 5340 0.015 165 3560 0.013 95
≤ 15D 0.06 7600 0.016 240 6080 0.014 170 4560 0.013 115 3040 0.011 65
> 15D 0.04 7600 0.011 160 6080 0.009 110 4560 0.008 75 3040 0.007 45
3
≤ 6D 0.15 10600 0.040 850 8480 0.036 610 6360 0.032 405 4240 0.028 235
≤ 8D 0.13 9600 0.034 650 7680 0.031 470 5760 0.027 315 3840 0.024 185
≤ 10D 0.11 8500 0.028 480 6800 0.025 340 5100 0.022 230 3400 0.020 135
≤ 12D 0.08 7400 0.022 330 5920 0.020 230 4440 0.018 155 2960 0.015 90
≤ 15D 0.07 6400 0.018 230 5120 0.016 170 3840 0.014 110 2560 0.013 65
> 15D 0.05 6400 0.012 150 5120 0.011 110 3840 0.010 75 2560 0.008 45
4
≤ 6D 0.20 8000 0.050 800 6400 0.045 580 4800 0.040 385 3200 0.035 225
≤ 8D 0.17 7200 0.043 610 5760 0.038 440 4320 0.034 295 2880 0.030 170
≤ 10D 0.14 6400 0.035 450 5120 0.032 320 3840 0.028 215 2560 0.025 125
≤ 12D 0.11 5600 0.028 310 4480 0.025 220 3360 0.022 150 2240 0.019 85
≤ 15D 0.09 4800 0.023 220 3840 0.020 160 2880 0.018 105 1920 0.016 60
> 15D 0.06 4800 0.015 140 3840 0.014 100 2880 0.012 70 1920 0.011 40
6
≤ 6D 0.30 5300 0.070 740 4240 0.063 530 3180 0.056 355 2120 0.049 210
≤ 8D 0.26 4800 0.060 570 3840 0.054 410 2880 0.048 275 1920 0.042 160
≤ 10D 0.21 4200 0.049 410 3360 0.044 300 2520 0.039 200 1680 0.034 115
≤ 12D 0.17 3700 0.039 280 2960 0.035 210 2220 0.031 135 1480 0.027 80
> 12D 0.14 3200 0.032 200 2560 0.028 150 1920 0.025 95 1280 0.022 55
UH - < 70HRC - Corner radius
599
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
UH
h stock standard f non-standard stock m stock exhaustion
D D Tol. CR CR Tol. d(h6) l l1 d1 L z 30’ 1° 1°30’ 2° 3° EDP No. Stock
0.2 0/-0.020 0.02 +/-0.010 4 0.3 0.5 0.16 50 2 0.57 0.59 0.6 0.62 0.66 UH21200202005 h
0.2 0/-0.020 0.02 +/-0.010 4 0.3 1 0.16 50 2 1.09 1.12 1.16 1.19 1.26 UH2120020201 h
0.2 0/-0.020 0.02 +/-0.010 4 0.3 1.5 0.16 50 2 1.60 1.65 1.71 1.76 1.86 UH21200202015 h
0.3 0/-0.020 0.03 +/-0.010 4 0.4 1 0.26 50 2 1.09 1.12 1.15 1.19 1.26 UH21200300301 h
0.3 0/-0.020 0.03 +/-0.010 4 0.4 2 0.26 50 2 2.12 2.19 2.26 2.32 2.46 UH21200300302 h
0.3 0/-0.020 0.03 +/-0.010 4 0.4 3 0.26 50 2 3.15 3.25 3.36 3.46 3.66 UH21200300303 h
0.4 0/-0.020 0.03 +/-0.010 4 0.6 2 0.37 50 2 2.12 2.19 2.26 2.32 2.46 UH21200400302 h
0.4 0/-0.020 0.03 +/-0.010 4 0.6 3 0.37 50 2 3.15 3.25 3.36 3.46 3.66 UH21200400303 h
0.4 0/-0.020 0.03 +/-0.010 4 0.6 4 0.37 50 2 4.19 4.32 4.46 4.59 4.86 UH21200400304 h
0.4 0/-0.020 0.03 +/-0.010 4 0.6 5 0.37 50 2 5.22 5.39 5.56 5.73 6.07 UH21200400305 h
0.5 0/-0.020 0.05 +/-0.010 4 0.7 2 0.45 50 2 2.16 2.23 2.29 2.36 2.50 UH21200500502 h
0.5 0/-0.020 0.05 +/-0.010 4 0.7 4 0.45 50 2 4.22 4.36 4.50 4.63 4.90 UH21200500504 h
0.5 0/-0.020 0.05 +/-0.010 4 0.7 6 0.45 50 2 6.29 6.49 6.70 6.90 7.31 UH21200500506 h
0.5 0/-0.020 0.05 +/-0.010 4 0.7 8 0.45 50 2 8.36 8.63 8.90 9.17 9.71 UH21200500508 h
0.6 0/-0.020 0.05 +/-0.010 4 0.9 2 0.55 50 2 2.16 2.23 2.29 2.36 2.50 UH21200600502 h
0.6 0/-0.020 0.05 +/-0.010 4 0.9 4 0.55 50 2 4.22 4.36 4.50 4.63 4.90 UH21200600504 h
0.6 0/-0.020 0.05 +/-0.010 4 0.9 6 0.55 50 2 6.29 6.49 6.70 6.90 7.31 UH21200600506 h
0.6 0/-0.020 0.05 +/-0.010 4 0.9 8 0.55 50 2 8.36 8.63 8.90 9.17 9.71 UH21200600508 h
0.6 0/-0.020 0.05 +/-0.010 4 0.9 10 0.55 50 2 10.43 10.76 11.10 11.44 12.12 UH21200600510 h
0.7 0/-0.020 0.08 +/-0.010 4 1.0 2 0.65 50 2 2.16 2.22 2.29 2.36 2.49 UH21200700802 h
0.7 0/-0.020 0.08 +/-0.010 4 1.0 4 0.65 50 2 4.22 4.36 4.49 4.63 4.90 UH21200700804 h
0.7 0/-0.020 0.08 +/-0.010 4 1.0 6 0.65 50 2 6.29 6.49 6.69 6.90 7.30 UH21200700806 h
0.7 0/-0.020 0.08 +/-0.010 4 1.0 8 0.65 50 2 8.36 8.63 8.90 9.17 9.71 UH21200700808 h
0.7 0/-0.020 0.08 +/-0.010 4 1.0 10 0.65 50 2 10.42 10.76 11.10 11.44 12.11 UH21200700810 h
0.8 0/-0.020 0.08 +/-0.010 4 1.2 4 0.75 50 2 4.22 4.36 4.49 4.63 4.90 UH21200800804 h
0.8 0/-0.020 0.08 +/-0.010 4 1.2 6 0.75 50 2 6.29 6.49 6.69 6.90 7.30 UH21200800806 h
0.8 0/-0.020 0.08 +/-0.010 4 1.2 8 0.75 50 2 8.36 8.63 8.90 9.17 9.71 UH21200800808 h
0.8 0/-0.020 0.08 +/-0.010 4 1.2 10 0.75 50 2 10.42 10.76 11.10 11.44 12.11 UH21200800810 h
0.8 0/-0.020 0.08 +/-0.010 4 1.2 12 0.75 50 2 12.49 12.90 13.30 13.7 14.51 UH21200800812 h
0.9 0/-0.020 0.08 +/-0.010 4 1.4 6 0.85 50 2 6.29 6.49 6.69 6.90 7.30 UH21200900806 h
0.9 0/-0.020 0.08 +/-0.010 4 1.4 8 0.85 50 2 8.36 8.63 8.90 9.17 9.71 UH21200900808 h
0.9 0/-0.020 0.08 +/-0.010 4 1.4 10 0.85 50 2 10.42 10.76 11.10 11.44 12.11 UH21200900810 h
0.9 0/-0.020 0.08 +/-0.010 4 1.4 15 0.85 50 2 15.59 16.1 16.60 17.11 18.12 UH21200900815 h
1.0 0/-0.020 0.10 +/-0.010 4 1.5 6 0.95 50 2 6.39 6.59 6.80 7.00 7.41 UH2120100106 h
1.0 0/-0.020 0.10 +/-0.010 4 1.5 8 0.95 50 2 8.45 8.73 9.00 9.27 9.81 UH2120100108 h
1.0 0/-0.020 0.10 +/-0.010 4 1.5 10 0.95 50 2 10.52 10.86 11.20 11.54 12.22 UH2120100110 h
1.0 0/-0.020 0.10 +/-0.010 4 1.5 12 0.95 50 2 12.59 12.99 13.40 13.81 14.62 UH2120100112 h
1.0 0/-0.020 0.10 +/-0.010 4 1.5 14 0.95 50 2 14.66 15.13 15.60 16.08 17.03 UH2120100114 h
1.0 0/-0.020 0.10 +/-0.010 4 1.5 16 0.95 50 2 16.72 17.26 17.80 18.35 19.43 UH2120100116 h
UH212
cylindrical shank, 2F, extended and reduced neck,
corner radius
OSAWA
NORM
<70
PMKNSH
,, +
+ 1st choice , suitable
SQUARE RIB
CR CR
α
actual length
actual length according to _ angle
UH - < 70HRC - Corner radius
600
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
UH
h stock standard f non-standard stock m stock exhaustion
D D Tol. CR CR Tol. d(h6) l l1 d1 L z 30’ 1° 1°30’ 2° 3° EDP No. Stock
1.2 0/-0.020 0.10 +/-0.010 4 1.8 6 1.15 50 2 6.39 6.59 6.80 7.00 7.41 UH2120120106 h
1.2 0/-0.020 0.10 +/-0.010 4 1.8 8 1.15 50 2 8.45 8.73 9.00 9.27 9.81 UH2120120108 h
1.2 0/-0.020 0.10 +/-0.010 4 1.8 10 1.15 50 2 10.52 10.86 11.20 11.54 12.22 UH2120120110 h
1.2 0/-0.020 0.10 +/-0.010 4 1.8 12 1.15 50 2 12.59 12.99 13.40 13.81 14.62 UH2120120112 h
1.4 0/-0.020 0.15 +/-0.010 4 2.1 6 1.35 50 2 6.38 6.59 6.79 6.99 7.40 UH21201401506 h
1.4 0/-0.020 0.15 +/-0.010 4 2.1 8 1.35 50 2 8.45 8.72 8.99 9.26 9.80 UH21201401508 h
1.4 0/-0.020 0.15 +/-0.010 4 2.1 10 1.35 50 2 10.52 10.86 11.19 11.53 12.21 UH21201401510 h
1.4 0/-0.020 0.15 +/-0.010 4 2.1 12 1.35 50 2 12.59 12.99 13.40 13.80 14.61 UH21201401512 h
1.4 0/-0.020 0.15 +/-0.010 4 2.1 14 1.35 50 2 14.65 15.13 15.60 16.07 17.02 UH21201401514 h
1.4 0/-0.020 0.15 +/-0.010 4 2.1 16 1.35 50 2 16.72 17.26 17.80 18.34 19.42 UH21201401516 h
1.5 0/-0.020 0.15 +/-0.010 4 2.3 6 1.45 50 2 6.38 6.59 6.79 6.99 7.40 UH21201501506 h
1.5 0/-0.020 0.15 +/-0.010 4 2.3 8 1.45 50 2 8.45 8.72 8.99 9.26 9.80 UH21201501508 h
1.5 0/-0.020 0.15 +/-0.010 4 2.3 10 1.45 50 2 10.52 10.86 11.19 11.53 12.21 UH21201501510 h
1.5 0/-0.020 0.15 +/-0.010 4 2.3 12 1.45 50 2 12.59 12.99 13.40 13.80 14.61 UH21201501512 h
1.5 0/-0.020 0.15 +/-0.010 4 2.3 14 1.45 50 2 14.65 15.13 15.60 16.07 17.02 UH21201501514 h
1.5 0/-0.020 0.15 +/-0.010 4 2.3 16 1.45 50 2 16.72 17.26 17.80 18.34 19.42 UH21201501516 h
1.5 0/-0.020 0.15 +/-0.010 4 2.3 18 1.45 60 2 18.79 19.39 20.00 20.61 21.82 UH21201501518 h
1.5 0/-0.020 0.15 +/-0.010 4 2.3 20 1.45 60 2 20.86 21.53 22.20 22.88 24.23 UH21201501520 h
1.6 0/-0.020 0.15 +/-0.010 4 2.4 6 1.55 50 2 6.38 6.59 6.79 6.99 7.40 UH21201601506 h
1.6 0/-0.020 0.15 +/-0.010 4 2.4 8 1.55 50 2 8.45 8.72 8.99 9.26 9.80 UH21201601508 h
1.6 0/-0.020 0.15 +/-0.010 4 2.4 10 1.55 50 2 10.52 10.86 11.19 11.53 12.21 UH21201601510 h
1.6 0/-0.020 0.15 +/-0.010 4 2.4 12 1.55 50 2 12.59 12.99 13.40 13.80 14.61 UH21201601512 h
1.6 0/-0.020 0.15 +/-0.010 4 2.4 14 1.55 50 2 14.65 15.13 15.60 16.07 17.02 UH21201601514 h
1.6 0/-0.020 0.15 +/-0.010 4 2.4 16 1.55 50 2 16.72 17.26 17.80 18.34 19.42 UH21201601516 h
1.6 0/-0.020 0.15 +/-0.010 4 2.4 18 1.55 60 2 18.79 19.39 20.00 20.61 21.82 UH21201601518 h
1.6 0/-0.020 0.15 +/-0.010 4 2.4 20 1.55 60 2 20.86 21.53 22.20 22.88 24.23 UH21201601520 h
1.8 0/-0.020 0.20 +/-0.010 4 2.7 6 1.75 50 2 6.38 6.58 6.79 6.99 7.39 UH2120180206 h
1.8 0/-0.020 0.20 +/-0.010 4 2.7 8 1.75 50 2 8.45 8.72 8.99 9.26 9.79 UH2120180208 h
1.8 0/-0.020 0.20 +/-0.010 4 2.7 10 1.75 50 2 10.52 10.85 11.19 11.52 12.20 UH2120180210 h
1.8 0/-0.020 0.20 +/-0.010 4 2.7 12 1.75 50 2 12.58 12.99 13.39 13.79 14.60 UH2120180212 h
1.8 0/-0.020 0.20 +/-0.010 4 2.7 14 1.75 50 2 14.65 15.12 15.59 16.06 17.01 UH2120180214 h
1.8 0/-0.020 0.20 +/-0.010 4 2.7 16 1.75 50 2 16.72 17.26 17.79 18.33 19.41 UH2120180216 h
1.8 0/-0.020 0.20 +/-0.010 4 2.7 18 1.75 60 2 18.79 19.39 20.00 20.6 21.81 UH2120180218 h
1.8 0/-0.020 0.20 +/-0.010 4 2.7 20 1.75 60 2 20.85 21.53 22.20 22.87 24.22 UH2120180220 h
20/-0.020 0.20 +/-0.010 4 3 6 1.95 50 2 6.38 6.58 6.79 6.99 7.39 UH2120200206 h
20/-0.020 0.20 +/-0.010 4 3 8 1.95 50 2 8.45 8.72 8.99 9.26 9.79 UH2120200208 h
20/-0.020 0.20 +/-0.010 4 3 10 1.95 50 2 10.52 10.85 11.19 11.52 12.20 UH2120200210 h
20/-0.020 0.20 +/-0.010 4 3 12 1.95 50 2 12.58 12.99 13.39 13.79 14.60 UH2120200212 h
20/-0.020 0.20 +/-0.010 4 3 14 1.95 50 2 14.65 15.12 15.59 16.06 17.01 UH2120200214 h
UH212
cylindrical shank, 2F, extended and reduced neck,
corner radius
OSAWA
NORM
<70
PMKNSH
,, +
+ 1st choice , suitable
SQUARE RIB
CR CR
α
actual length
actual length according to _ angle
UH - < 70HRC - Corner radius
601
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
UH
h stock standard f non-standard stock m stock exhaustion
D D Tol. CR CR Tol. d(h6) l l1 d1 L z 30’ 1° 1°30’ 2° 3° EDP No. Stock
20/-0.020 0.20 +/-0.010 4 3 16 1.95 50 2 16.72 17.26 17.79 18.33 19.41 UH2120200216 h
20/-0.020 0.20 +/-0.010 4 3 18 1.95 60 2 18.79 19.39 20.00 20.60 21.81 UH2120200218 h
20/-0.020 0.20 +/-0.010 4 3 20 1.95 60 2 20.85 21.53 22.20 22.87 - UH2120200220 h
20/-0.020 0.20 +/-0.010 4 3 25 1.95 75 2 26.02 26.86 27.70 28.54 - UH2120200225 h
20/-0.020 0.20 +/-0.010 4 3 30 1.95 75 2 31.19 32.20 33.21 - - UH2120200230 h
2.5 0/-0.020 0.30 +/-0.010 4 3.7 8 2.40 50 2 8.45 8.71 8.98 9.24 9.77 UH2120250308 h
2.5 0/-0.020 0.30 +/-0.010 4 3.7 10 2.40 50 2 10.51 10.85 11.18 11.51 12.18 UH2120250310 h
2.5 0/-0.020 0.30 +/-0.010 4 3.7 12 2.40 50 2 12.58 12.98 13.38 13.78 14.58 UH2120250312 h
2.5 0/-0.020 0.30 +/-0.010 4 3.7 14 2.40 50 2 14.65 15.12 15.58 16.05 - UH2120250314 h
2.5 0/-0.020 0.30 +/-0.010 4 3.7 16 2.40 50 2 16.72 17.25 17.78 18.32 - UH2120250316 h
2.5 0/-0.020 0.30 +/-0.010 4 3.7 18 2.40 60 2 18.78 19.38 19.99 20.59 - UH2120250318 h
2.5 0/-0.020 0.30 +/-0.010 4 3.7 20 2.40 60 2 20.85 21.52 22.19 22.86 - UH2120250320 h
2.5 0/-0.020 0.30 +/-0.010 4 3.7 25 2.40 60 2 26.02 26.86 27.69 - - UH2120250325 h
2.5 0/-0.020 0.30 +/-0.010 4 3.7 30 2.40 75 2 31.19 32.19 - - - UH2120250330 h
30/-0.025 0.30 +/-0.010 6 4.5 8 2.85 50 2 8.64 8.91 9.18 9.45 10.00 UH2120300308 h
30/-0.025 0.30 +/-0.010 6 4.5 10 2.85 50 2 10.71 11.04 11.38 11.72 12.40 UH2120300310 h
30/-0.025 0.30 +/-0.010 6 4.5 12 2.85 50 2 12.77 13.18 13.59 13.99 14.80 UH2120300312 h
30/-0.025 0.30 +/-0.010 6 4.5 14 2.85 50 2 14.84 15.31 15.79 16.26 17.21 UH2120300314 h
30/-0.025 0.30 +/-0.010 6 4.5 16 2.85 60 2 16.91 17.45 17.99 18.53 19.61 UH2120300316 h
30/-0.025 0.30 +/-0.010 6 4.5 18 2.85 60 2 18.98 19.58 20.19 20.80 22.02 UH2120300318 h
30/-0.025 0.30 +/-0.010 6 4.5 20 2.85 60 2 21.04 21.72 22.39 23.07 24.42 UH2120300320 h
30/-0.025 0.30 +/-0.010 6 4.5 25 2.85 75 2 26.21 27.05 27.90 28.74 30.43 UH2120300325 h
40/-0.025 0.40 +/-0.010 6 4.5 10 3.85 60 2 10.90 11.24 11.58 11.92 12.60 UH2120400410 h
40/-0.025 0.40 +/-0.010 6 4.5 15 3.85 60 2 16.06 16.57 17.08 17.59 18.61 UH2120400415 h
40/-0.025 0.40 +/-0.010 6 4.5 20 3.85 60 2 21.23 21.91 22.59 23.27 - UH2120400420 h
40/-0.025 0.40 +/-0.010 6 4.5 25 3.85 75 2 26.40 27.25 28.09 28.94 - UH2120400425 h
40/-0.025 0.40 +/-0.010 6 4.5 30 3.85 75 2 31.57 32.58 33.60 - - UH2120400430 h
40/-0.025 0.40 +/-0.010 6 4.5 40 3.85 75 2 41.90 43.25 - - - UH2120400440 h
UH212
cylindrical shank, 2F, extended and reduced neck,
corner radius
OSAWA
NORM
<70
PMKNSH
,, +
+ 1st choice , suitable
SQUARE RIB
CR CR
α
actual length
actual length according to _ angle
UH - < 70HRC - Corner radius
602
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
UH
CUTTING PARAMETERS
UH212
SQUARE RIB
Material Group
ISO 513 P3 P4 P5 K2 K3 P6 K4 H1 H4 H5 H2 H3
Hardness/Rm < 45 HRC 45 - 55 HRC 55 - 60 HRC 60 - 65 HRC
ap x ae ap x D ap x D ap x D ap x D
Vc (m/min) 80-120 60-100 50-70 30-50
D
(mm)
l1
(mm)
ap
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
0.2
≤ 6D 0.01 40000 0.003 240 40000 0.003 220 40000 0.002 190 40000 0.002 170
≤ 8D 0.01 40000 0.003 200 40000 0.002 180 40000 0.002 165 40000 0.002 145
≤ 10D 0.01 40000 0.002 170 40000 0.002 150 40000 0.002 135 40000 0.001 120
≤ 12D 0.01 40000 0.002 130 40000 0.001 120 40000 0.001 105 40000 0.001 90
0.3
≤ 6D 0.02 40000 0.004 320 40000 0.004 290 40000 0.003 255 40000 0.003 225
≤ 8D 0.01 40000 0.003 270 40000 0.003 240 40000 0.003 220 38200 0.002 180
≤ 10D 0.01 40000 0.003 220 40000 0.003 200 40000 0.002 180 34000 0.002 135
≤ 12D 0.01 40000 0.002 180 40000 0.002 160 40000 0.002 140 29700 0.002 90
0.4
≤ 6D 0.02 40000 0.006 480 40000 0.005 430 40000 0.005 385 31800 0.004 265
≤ 8D 0.02 40000 0.005 410 40000 0.005 370 40000 0.004 325 28700 0.004 205
≤ 10D 0.01 40000 0.004 340 40000 0.004 300 38200 0.003 255 25500 0.003 150
≤ 12D 0.01 40000 0.003 260 40000 0.003 240 33400 0.003 175 22300 0.002 105
0.5
≤ 6D 0.03 40000 0.007 560 40000 0.006 500 38200 0.006 430 25500 0.005 250
≤ 8D 0.02 40000 0.006 480 40000 0.005 430 34400 0.005 325 22900 0.004 190
≤ 10D 0.02 40000 0.005 390 40000 0.004 350 30600 0.004 240 20400 0.003 140
≤ 12D 0.01 35000 0.004 270 35700 0.003 250 26800 0.003 165 17800 0.003 95
0.6
≤ 6D 0.03 40000 0.008 640 40000 0.007 580 31800 0.006 405 21200 0.006 235
≤ 8D 0.03 40000 0.007 540 38200 0.006 470 28700 0.005 310 19100 0.005 180
≤ 10D 0.02 40000 0.006 450 34000 0.005 340 25500 0.004 230 17000 0.004 135
≤ 12D 0.02 37200 0.004 330 29700 0.004 240 22300 0.004 155 14900 0.003 90
0.8
≤ 6D 0.04 39800 0.010 800 31840 0.009 570 23880 0.008 380 15920 0.007 225
≤ 8D 0.03 35800 0.009 610 28640 0.008 440 21480 0.007 290 14320 0.006 170
≤ 10D 0.03 31800 0.007 450 25440 0.006 320 19080 0.006 215 12720 0.005 125
≤ 12D 0.02 27900 0.006 310 22320 0.005 220 16740 0.004 145 11160 0.004 85
1
≤ 6D 0.05 31800 0.012 760 25440 0.011 550 19080 0.010 365 12720 0.008 215
≤ 8D 0.04 28700 0.010 590 22960 0.009 420 17220 0.008 280 11480 0.007 165
≤ 10D 0.04 25500 0.008 430 20400 0.008 310 15300 0.007 205 10200 0.006 120
≤ 12D 0.03 22300 0.007 290 17840 0.006 210 13380 0.005 140 8920 0.005 80
1.2
≤ 6D 0.06 26500 0.022 1170 21200 0.020 840 15900 0.018 560 10600 0.015 325
≤ 8D 0.05 23900 0.019 890 19120 0.017 640 14340 0.015 430 9560 0.013 250
≤ 10D 0.04 21200 0.015 650 16960 0.014 470 12720 0.012 315 8480 0.011 185
≤ 12D 0.03 18600 0.012 450 14880 0.011 320 11160 0.010 215 7440 0.008 125
1.4
≤ 6D 0.07 22700 0.024 1090 18160 0.022 780 13620 0.019 525 9080 0.017 305
≤ 8D 0.06 20500 0.020 840 16400 0.018 600 12300 0.016 400 8200 0.014 235
≤ 10D 0.05 18200 0.017 610 14560 0.015 440 10920 0.013 295 7280 0.012 170
≤ 12D 0.04 15900 0.013 420 12720 0.012 300 9540 0.011 200 6360 0.009 120
≤ 15D 0.03 13600 0.011 290 10880 0.010 210 8160 0.009 140 5440 0.008 80
> 15D 0.02 11400 0.007 160 9120 0.006 120 6840 0.006 80 4560 0.005 45
1.5
≤ 6D 0.08 21200 0.025 1060 16960 0.023 760 12720 0.020 510 8480 0.018 295
≤ 8D 0.06 19100 0.021 810 15280 0.019 580 11460 0.017 390 7640 0.015 225
≤ 10D 0.05 17000 0.018 590 13600 0.016 430 10200 0.014 285 6800 0.012 165
≤ 12D 0.04 14900 0.014 410 11920 0.012 300 8940 0.011 195 5960 0.010 115
≤ 15D 0.03 12700 0.011 290 10160 0.010 210 7620 0.009 135 5080 0.008 80
> 15D 0.02 10600 0.008 160 8480 0.007 110 6360 0.006 75 4240 0.005 45
1.6
≤ 6D 0.08 19900 0.026 1030 15920 0.023 750 11940 0.021 495 7960 0.018 290
≤ 8D 0.07 17900 0.022 790 14320 0.020 570 10740 0.018 380 7160 0.015 220
≤ 10D 0.06 15900 0.018 580 12720 0.016 420 9540 0.015 280 6360 0.013 160
≤ 12D 0.04 13900 0.014 400 11120 0.013 290 8340 0.011 190 5560 0.010 110
≤ 15D 0.04 11900 0.012 280 9520 0.011 200 7140 0.009 135 4760 0.008 80
> 15D 0.02 10000 0.008 160 8000 0.007 110 6000 0.006 75 4000 0.005 45
UH - < 70HRC - Corner radius
603
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
UH
CUTTING PARAMETERS
UH212
SQUARE RIB
Material Group
ISO 513 P3 P4 P5 K2 K3 P6 K4 H1 H4 H5 H2 H3
Hardness/Rm < 45 HRC 45 - 55 HRC 55 - 60 HRC 60 - 65 HRC
ap x ae ap x D ap x D ap x D ap x D
Vc (m/min) 80-120 60-100 50-70 30-50
D
(mm)
l1
(mm)
ap
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
1.8
≤ 6D 0.09 17700 0.028 990 14160 0.025 710 10620 0.022 475 7080 0.020 280
≤ 8D 0.08 15900 0.024 760 12720 0.021 540 9540 0.019 365 6360 0.017 210
≤ 10D 0.06 14200 0.020 560 11360 0.018 400 8520 0.016 265 5680 0.014 155
≤ 12D 0.05 12400 0.015 380 9920 0.014 270 7440 0.012 185 4960 0.011 105
≤ 15D 0.04 10600 0.013 270 8480 0.011 190 6360 0.010 130 4240 0.009 75
> 15D 0.03 8800 0.008 150 7040 0.008 110 5280 0.007 70 3520 0.006 40
2
≤ 6D 0.10 15900 0.030 950 12720 0.027 690 9540 0.024 460 6360 0.021 265
≤ 8D 0.09 14300 0.026 730 11440 0.023 530 8580 0.020 350 5720 0.018 205
≤ 10D 0.07 12700 0.021 530 10160 0.019 380 7620 0.017 255 5080 0.015 150
≤ 12D 0.06 11100 0.017 370 8880 0.015 260 6660 0.013 175 4440 0.012 105
≤ 15D 0.05 9600 0.014 260 7680 0.012 190 5760 0.011 125 3840 0.009 75
> 15D 0.03 9600 0.009 170 7680 0.008 120 5760 0.007 85 3840 0.006 50
2.5
≤ 6D 0.13 12700 0.035 890 10160 0.032 640 7620 0.028 425 5080 0.025 250
≤ 8D 0.11 11500 0.030 680 9200 0.027 490 6900 0.024 330 4600 0.021 190
≤ 10D 0.09 10200 0.025 500 8160 0.022 360 6120 0.020 240 4080 0.017 140
≤ 12D 0.07 8900 0.019 340 7120 0.017 250 5340 0.015 165 3560 0.013 95
≤ 15D 0.06 7600 0.016 240 6080 0.014 170 4560 0.013 115 3040 0.011 65
> 15D 0.04 7600 0.011 160 6080 0.009 110 4560 0.008 75 3040 0.007 45
3
≤ 6D 0.15 10600 0.040 850 8480 0.036 610 6360 0.032 405 4240 0.028 235
≤ 8D 0.13 9600 0.034 650 7680 0.031 470 5760 0.027 315 3840 0.024 185
≤ 10D 0.11 8500 0.028 480 6800 0.025 340 5100 0.022 230 3400 0.020 135
≤ 12D 0.08 7400 0.022 330 5920 0.020 230 4440 0.018 155 2960 0.015 90
≤ 15D 0.07 6400 0.018 230 5120 0.016 170 3840 0.014 110 2560 0.013 65
> 15D 0.05 6400 0.012 150 5120 0.011 110 3840 0.010 75 2560 0.008 45
4
≤ 6D 0.20 8000 0.050 800 6400 0.045 580 4800 0.040 385 3200 0.035 225
≤ 8D 0.17 7200 0.043 610 5760 0.038 440 4320 0.034 295 2880 0.030 170
≤ 10D 0.14 6400 0.035 450 5120 0.032 320 3840 0.028 215 2560 0.025 125
≤ 12D 0.11 5600 0.028 310 4480 0.025 220 3360 0.022 150 2240 0.019 85
≤ 15D 0.09 4800 0.023 220 3840 0.020 160 2880 0.018 105 1920 0.016 60
> 15D 0.06 4800 0.015 140 3840 0.014 100 2880 0.012 70 1920 0.011 40
UH - < 70HRC - Corner radius
604
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
UH
h stock standard f non-standard stock m stock exhaustion
D D Tol. CR CR Tol. d(h6) l l1 d1 L z EDP No. Stock
10/-0.012 0.10 +/-0.010 4 2 3 0.95 50 2 UHCS2010 h
1.5 0/-0.012 0.10 +/-0.010 4 2.5 4 1.45 50 2 UHCS2015 h
20/-0.012 0.10 +/-0.010 4 3 6 1.95 50 2 UHCS2020 h
30/-0.012 0.10 +/-0.010 6 4.5 8 2.85 55 2 UHCS2030 h
40/-0.012 0.10 +/-0.010 6 6 10 3.85 55 2 UHCS2040 h
50/-0.012 0.20 +/-0.010 6 6 11 4.85 50 2 UHCS2050 h
60/-0.012 0.20 +/-0.010 6 9 15 5.85 60 2 UHCS2060 h
80/-0.015 0.20 +/-0.015 8 12 20 7.70 70 2 UHCS2080 h
10 0/-0.015 0.20 +/-0.015 10 15 25 9.70 70 2 UHCS2100 h
12 0/-0.015 0.30 +/-0.015 12 18 30 11.70 80 2 UHCS2120 h
UHCS2
cylindrical shank, 2F, reduced neck, corner radius
OSAWA
NORM
<70
PMKNSH
,, +
+ 1st choice , suitable
SLOTTING
CR
CR
UH - < 70HRC - Corner radius
605
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
UH
CUTTING PARAMETERS
UHCS2
SLOTTING
Material
Group
ISO 513
P3 P4 P5 K2 K3 P6 K4 H1 H4 H5 H2 H3
Hardness/Rm < 45 HRC 45 - 55 HRC 55 - 60 HRC 60 - 65 HRC
ap x ae 0.3D x D 0.2D x D 0.2D x D 0.1D x D
Vc (m/min) 80-120 60-100 50-70 30-50
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
130000 0.007 420 25480 0.006 320 19110 0.006 215 12740 0.005 125
215920 0.012 380 12740 0.011 280 9550 0.010 185 6370 0.008 105
310620 0.017 360 8490 0.015 260 6370 0.014 175 4250 0.012 100
47960 0.023 370 6370 0.021 260 4780 0.018 175 3180 0.016 100
56370 0.030 380 5100 0.027 280 3820 0.024 185 2550 0.021 105
65310 0.038 400 4250 0.034 290 3180 0.030 195 2120 0.027 115
83980 0.050 400 3180 0.045 290 2390 0.040 190 1590 0.035 110
10 3180 0.065 410 2550 0.059 300 1910 0.052 200 1270 0.046 115
12 2650 0.080 420 2120 0.072 310 1590 0.064 205 1060 0.056 120
UH - < 70HRC - Corner radius
606
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
UH
UHF4LN
cylindrical shank, 4F Unequal Pitch,
extended and reduced neck, corner radius
OSAWA
NORM
<70
PMKNSH
,, +
+ 1st choice , suitable
SQUARE RIB
CR
h stock standard f non-standard stock m stock exhaustion
D D Tol. CR CR Tol. d(h6) l l1 d1 L z 30’ 1° 1°30’ 2° 3° EDP No. Stock
10/-0.020 0.10 +/-0.010 4 1 4 0.90 50 4 4.32 4.46 4.62 4.78 5.13 UHF4LN0100104 h
10/-0.020 0.10 +/-0.010 4 1 6 0.90 50 4 6.39 6.60 6.83 7.08 7.60 UHF4LN0100106 h
10/-0.020 0.10 +/-0.010 4 1 8 0.90 50 4 8.45 8.74 9.05 9.37 10.07 UHF4LN0100108 h
10/-0.020 0.10 +/-0.010 4 1 10 0.90 50 4 10.52 10.88 11.26 11.66 12.53 UHF4LN0100110 h
10/-0.020 0.10 +/-0.010 4 1 12 0.90 50 4 12.59 13.02 13.48 13.96 15.00 UHF4LN0100112 h
10/-0.020 0.10 +/-0.010 4 1 14 0.90 50 4 14.66 15.16 15.69 16.25 17.47 UHF4LN0100114 h
10/-0.020 0.10 +/-0.010 4 1 16 0.90 50 4 16.72 17.30 17.91 18.55 19.94 UHF4LN0100116 h
10/-0.020 0.10 +/-0.010 4 1 20 0.90 75 4 20.86 21.57 22.33 23.14 24.87 UHF4LN0100120 h
10/-0.020 0.20 +/-0.010 4 1 4 0.90 50 4 4.32 4.46 4.61 4.77 5.11 UHF4LN0100204 h
10/-0.020 0.20 +/-0.010 4 1 6 0.90 50 4 6.38 6.60 6.82 7.06 7.57 UHF4LN0100206 h
10/-0.020 0.20 +/-0.010 4 1 8 0.90 50 4 8.45 8.73 9.04 9.35 10.04 UHF4LN0100208 h
10/-0.020 0.20 +/-0.010 4 1 10 0.90 50 4 10.52 10.87 11.25 11.65 12.51 UHF4LN0100210 h
10/-0.020 0.20 +/-0.010 4 1 12 0.90 50 4 12.58 13.01 13.47 13.94 14.98 UHF4LN0100212 h
10/-0.020 0.20 +/-0.010 4 1 14 0.90 50 4 14.65 15.15 15.68 16.24 17.45 UHF4LN0100214 h
10/-0.020 0.20 +/-0.010 4 1 16 0.90 50 4 16.72 17.29 17.89 18.53 19.91 UHF4LN0100216 h
10/-0.020 0.20 +/-0.010 4 1 20 0.90 60 4 20.85 21.57 22.32 23.12 24.85 UHF4LN0100220 h
10/-0.020 0.30 +/-0.010 4 1 6 0.90 50 4 6.38 6.59 6.81 7.05 7.55 UHF4LN0100306 h
10/-0.020 0.30 +/-0.010 4 1 10 0.90 50 4 10.51 10.87 11.24 11.63 12.49 UHF4LN0100310 h
10/-0.020 0.30 +/-0.010 4 1 16 0.90 50 4 16.72 17.28 17.88 18.52 19.89 UHF4LN0100316 h
10/-0.020 0.30 +/-0.010 4 1 20 0.90 60 4 20.85 21.56 22.31 23.11 24.82 UHF4LN0100320 h
1.5 0/-0.020 0.10 +/-0.010 4 1.5 6 1.40 50 4 6.39 6.60 6.83 7.08 7.60 UHF4LN0150106 h
1.5 0/-0.020 0.10 +/-0.010 4 1.5 8 1.40 50 4 8.45 8.74 9.05 9.37 10.07 UHF4LN0150108 h
1.5 0/-0.020 0.10 +/-0.010 4 1.5 12 1.40 50 4 12.59 13.02 13.48 13.96 15.00 UHF4LN0150112 h
1.5 0/-0.020 0.10 +/-0.010 4 1.5 16 1.40 50 4 16.72 17.3 17.91 18.55 19.94 UHF4LN0150116 h
1.5 0/-0.020 0.10 +/-0.010 4 1.5 20 1.40 60 4 20.86 21.57 22.33 23.14 - UHF4LN0150120 h
1.5 0/-0.020 0.20 +/-0.010 4 1.5 6 1.40 50 4 6.38 6.60 6.82 7.06 7.57 UHF4LN0150206 h
1.5 0/-0.020 0.20 +/-0.010 4 1.5 8 1.40 50 4 8.45 8.73 9.04 9.35 10.04 UHF4LN0150208 h
1.5 0/-0.020 0.20 +/-0.010 4 1.5 10 1.40 50 4 10.52 10.87 11.25 11.65 12.51 UHF4LN0150210 h
1.5 0/-0.020 0.20 +/-0.010 4 1.5 12 1.40 50 4 12.58 13.01 13.47 13.94 14.98 UHF4LN0150212 h
1.5 0/-0.020 0.20 +/-0.010 4 1.5 14 1.40 50 4 14.65 15.15 15.68 16.24 17.45 UHF4LN0150214 h
1.5 0/-0.020 0.20 +/-0.010 4 1.5 16 1.40 50 4 16.72 17.29 17.89 18.53 19.91 UHF4LN0150216 h
1.5 0/-0.020 0.20 +/-0.010 4 1.5 18 1.40 60 4 18.79 19.43 20.11 20.83 22.38 UHF4LN0150218 h
1.5 0/-0.020 0.20 +/-0.010 4 1.5 20 1.40 60 4 20.85 21.57 22.32 23.12 - UHF4LN0150220 h
1.5 0/-0.020 0.30 +/-0.010 4 1.5 8 1.40 50 4 8.45 8.73 9.03 9.34 10.02 UHF4LN0150308 h
1.5 0/-0.020 0.30 +/-0.010 4 1.5 16 1.40 50 4 16.72 17.28 17.88 18.52 19.89 UHF4LN0150316 h
1.5 0/-0.020 0.30 +/-0.010 4 1.5 20 1.40 60 4 20.85 21.56 22.31 23.11 - UHF4LN0150320 h
20/-0.020 0.20 +/-0.010 4 2 6 1.90 50 4 6.38 6.60 6.82 7.06 7.57 UHF4LN0200206 h
20/-0.020 0.20 +/-0.010 4 2 8 1.90 50 4 8.45 8.73 9.04 9.35 10.04 UHF4LN0200208 h
20/-0.020 0.20 +/-0.010 4 2 10 1.90 50 4 10.52 10.87 11.25 11.65 12.51 UHF4LN0200210 h
CR
α
actual length
actual length according to _ angle
UH - < 70HRC - Corner radius
607
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
UH
h stock standard f non-standard stock m stock exhaustion
D D Tol. CR CR Tol. d(h6) l l1 d1 L z 30’ 1° 1°30’ 2° 3° EDP No. Stock
20/-0.020 0.20 +/-0.010 4 2 12 1.90 50 4 12.58 13.01 13.47 13.94 14.98 UHF4LN0200212 h
20/-0.020 0.20 +/-0.010 4 2 14 1.90 50 4 14.65 15.15 15.68 16.24 17.45 UHF4LN0200214 h
20/-0.020 0.20 +/-0.010 4 2 16 1.90 50 4 16.72 17.29 17.89 18.53 - UHF4LN0200216 h
20/-0.020 0.20 +/-0.010 4 2 18 1.90 60 4 18.79 19.43 20.11 20.83 - UHF4LN0200218 h
20/-0.020 0.20 +/-0.010 4 2 20 1.90 60 4 20.85 21.57 22.32 23.12 - UHF4LN0200220 h
20/-0.020 0.20 +/-0.010 4 2 25 1.90 75 4 26.02 26.91 27.86 - - UHF4LN0200225 h
20/-0.020 0.20 +/-0.010 4 2 30 1.90 75 4 31.19 32.26 33.40 - - UHF4LN0200230 h
20/-0.020 0.30 +/-0.010 4 2 8 1.90 50 4 8.45 8.73 9.03 9.34 10.02 UHF4LN0200308 h
20/-0.020 0.30 +/-0.010 4 2 16 1.90 50 4 16.72 17.28 17.88 18.52 - UHF4LN0200316 h
20/-0.020 0.30 +/-0.010 4 2 20 1.90 60 4 20.85 21.56 22.31 23.11 - UHF4LN0200320 h
20/-0.020 0.50 +/-0.010 4 2 6 1.90 50 4 6.37 6.58 6.79 7.02 7.50 UHF4LN0200506 h
20/-0.020 0.50 +/-0.010 4 2 8 1.90 50 4 8.44 8.71 9.00 9.31 9.97 UHF4LN0200508 h
20/-0.020 0.50 +/-0.010 4 2 12 1.90 50 4 12.57 12.99 13.43 13.9 14.91 UHF4LN0200512 h
20/-0.020 0.50 +/-0.010 4 2 16 1.90 50 4 16.71 17.27 17.86 18.49 - UHF4LN0200516 h
20/-0.020 0.50 +/-0.010 4 2 20 1.90 60 4 20.84 21.55 22.29 23.08 - UHF4LN0200520 h
20/-0.020 0.50 +/-0.010 4 2 25 1.90 75 4 26.01 26.89 27.83 28.82 - UHF4LN0200525 h
20/-0.020 0.50 +/-0.010 4 2 30 1.90 75 4 31.18 32.24 33.36 - - UHF4LN0200530 h
2.5 0/-0.020 0.30 +/-0.010 4 2.5 8 2.40 50 4 8.45 8.73 9.03 9.34 10.02 UHF4LN0250308 h
2.5 0/-0.020 0.30 +/-0.010 4 2.5 10 2.40 50 4 10.51 10.87 11.24 11.63 12.49 UHF4LN0250310 h
2.5 0/-0.020 0.30 +/-0.010 4 2.5 12 2.40 50 4 12.58 13.01 13.45 13.93 - UHF4LN0250312 h
2.5 0/-0.020 0.30 +/-0.010 4 2.5 14 2.40 50 4 14.65 15.14 15.67 16.22 - UHF4LN0250314 h
2.5 0/-0.020 0.30 +/-0.010 4 2.5 16 2.40 50 4 16.72 17.28 17.88 18.52 - UHF4LN0250316 h
2.5 0/-0.020 0.30 +/-0.010 4 2.5 18 2.40 60 4 18.78 19.42 20.10 20.81 - UHF4LN0250318 h
2.5 0/-0.020 0.30 +/-0.010 4 2.5 20 2.40 60 4 20.85 21.56 22.31 - - UHF4LN0250320 h
2.5 0/-0.020 0.30 +/-0.010 4 2.5 25 2.40 60 4 26.02 26.91 27.85 - - UHF4LN0250325 h
2.5 0/-0.020 0.30 +/-0.010 4 2.5 30 2.40 75 4 31.19 32.25 - - - UHF4LN0250330 h
2.5 0/-0.020 0.50 +/-0.010 4 2.5 8 2.40 50 4 8.44 8.71 9.00 9.31 9.97 UHF4LN0250508 h
2.5 0/-0.020 0.50 +/-0.010 4 2.5 12 2.40 50 4 12.57 12.99 13.43 13.90 - UHF4LN0250512 h
2.5 0/-0.020 0.50 +/-0.010 4 2.5 16 2.40 50 4 16.71 17.27 17.86 18.49 - UHF4LN0250516 h
2.5 0/-0.020 0.50 +/-0.010 4 2.5 20 2.40 60 4 20.84 21.55 22.29 - - UHF4LN0250520 h
2.5 0/-0.020 0.50 +/-0.010 4 2.5 25 2.40 60 4 26.01 26.89 27.83 - - UHF4LN0250525 h
2.5 0/-0.020 0.50 +/-0.010 4 2.5 30 2.40 75 4 31.18 32.24 - - - UHF4LN0250530 h
30/-0.025 0.20 +/-0.010 6 3 8 2.80 50 4 8.64 8.93 9.24 9.57 10.27 UHF4LN0300208 h
30/-0.025 0.20 +/-0.010 6 3 10 2.80 50 4 10.71 11.07 11.46 11.86 12.73 UHF4LN0300210 h
30/-0.025 0.20 +/-0.010 6 3 12 2.80 50 4 12.78 13.21 13.67 14.16 15.20 UHF4LN0300212 h
30/-0.025 0.20 +/-0.010 6 3 14 2.80 50 4 14.84 15.35 15.89 16.45 17.67 UHF4LN0300214 h
30/-0.025 0.20 +/-0.010 6 3 16 2.80 60 4 16.91 17.49 18.10 18.74 20.14 UHF4LN0300216 h
30/-0.025 0.20 +/-0.010 6 3 18 2.80 60 4 18.98 19.63 20.31 21.04 22.60 UHF4LN0300218 h
30/-0.025 0.20 +/-0.010 6 3 20 2.80 60 4 21.05 21.77 22.53 23.33 25.07 UHF4LN0300220 h
UHF4LN
cylindrical shank, 4F Unequal Pitch,
extended and reduced neck, corner radius
OSAWA
NORM
<70
PMKNSH
,, +
+ 1st choice , suitable
SQUARE RIB
CR CR
α
actual length
actual length according to _ angle
UH - < 70HRC - Corner radius
608
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
UH
h stock standard f non-standard stock m stock exhaustion
D D Tol. CR CR Tol. d(h6) l l1 d1 L z 30’ 1° 1°30’ 2° 3° EDP No. Stock
30/-0.025 0.20 +/-0.010 6 3 25 2.80 75 4 26.21 27.11 28.07 29.07 - UHF4LN0300225 h
30/-0.025 0.30 +/-0.010 6 3 8 2.80 50 4 8.64 8.93 9.23 9.55 10.24 UHF4LN0300308 h
30/-0.025 0.30 +/-0.010 6 3 10 2.80 50 4 10.71 11.07 11.45 11.85 12.71 UHF4LN0300310 h
30/-0.025 0.30 +/-0.010 6 3 12 2.80 50 4 12.77 13.20 13.66 14.14 15.18 UHF4LN0300312 h
30/-0.025 0.30 +/-0.010 6 3 14 2.80 50 4 14.84 15.34 15.87 16.44 17.64 UHF4LN0300314 h
30/-0.025 0.30 +/-0.010 6 3 16 2.80 60 4 16.91 17.48 18.09 18.73 20.11 UHF4LN0300316 h
30/-0.025 0.30 +/-0.010 6 3 18 2.80 60 4 18.98 19.62 20.30 21.02 22.58 UHF4LN0300318 h
30/-0.025 0.30 +/-0.010 6 3 20 2.80 60 4 21.04 21.76 22.52 23.32 25.05 UHF4LN0300320 h
30/-0.025 0.30 +/-0.010 6 3 30 2.80 75 4 31.38 32.45 33.59 34.79 - UHF4LN0300330 h
30/-0.025 0.50 +/-0.010 6 3 8 2.80 50 4 8.63 8.91 9.21 9.52 10.20 UHF4LN0300508 h
30/-0.025 0.50 +/-0.010 6 3 10 2.80 50 4 10.7 11.05 11.42 11.82 12.66 UHF4LN0300510 h
30/-0.025 0.50 +/-0.010 6 3 12 2.80 50 4 12.77 13.19 13.64 14.11 15.13 UHF4LN0300512 h
30/-0.025 0.50 +/-0.010 6 3 14 2.80 50 4 14.83 15.33 15.85 16.41 17.60 UHF4LN0300514 h
30/-0.025 0.50 +/-0.010 6 3 16 2.80 60 4 16.9 17.47 18.07 18.70 20.07 UHF4LN0300516 h
30/-0.025 0.50 +/-0.010 6 3 18 2.80 60 4 18.97 19.61 20.28 20.99 22.53 UHF4LN0300518 h
30/-0.025 0.50 +/-0.010 6 3 20 2.80 60 4 21.04 21.75 22.50 23.29 25.00 UHF4LN0300520 h
30/-0.025 0.50 +/-0.010 6 3 30 2.80 75 4 31.37 32.44 33.57 34.76 - UHF4LN0300530 h
40/-0.025 0.30 +/-0.010 6 4 10 3.70 60 4 10.90 11.26 11.65 12.06 12.93 UHF4LN0400310 h
40/-0.025 0.30 +/-0.010 6 4 15 3.70 60 4 16.07 16.61 17.19 17.79 19.10 UHF4LN0400315 h
40/-0.025 0.30 +/-0.010 6 4 20 3.70 60 4 21.24 21.96 22.72 23.53 - UHF4LN0400320 h
40/-0.025 0.30 +/-0.010 6 4 25 3.70 75 4 26.4 27.31 28.26 - - UHF4LN0400325 h
40/-0.025 0.30 +/-0.010 6 4 32 3.70 75 4 33.64 34.79 36.01 - - UHF4LN0400332 h
40/-0.025 0.30 +/-0.010 6 4 40 3.70 75 4 41.91 43.35 - - - UHF4LN0400340 h
40/-0.025 0.50 +/-0.010 6 4 10 3.70 60 4 10.89 11.25 11.63 12.03 12.89 UHF4LN0400510 h
40/-0.025 0.50 +/-0.010 6 4 15 3.70 60 4 16.06 16.60 17.17 17.76 19.06 UHF4LN0400515 h
40/-0.025 0.50 +/-0.010 6 4 20 3.70 60 4 21.23 21.94 22.7 23.50 - UHF4LN0400520 h
40/-0.025 0.50 +/-0.010 6 4 25 3.70 75 4 26.4 27.29 28.24 - - UHF4LN0400525 h
40/-0.025 0.50 +/-0.010 6 4 32 3.70 75 4 33.63 34.78 35.99 - - UHF4LN0400532 h
40/-0.025 0.50 +/-0.010 6 4 40 3.70 75 4 41.9 43.33 - - - UHF4LN0400540 h
UHF4LN
cylindrical shank, 4F Unequal Pitch,
extended and reduced neck, corner radius
OSAWA
NORM
<70
PMKNSH
,, +
+ 1st choice , suitable
SQUARE RIB
CR CR
α
actual length
actual length according to _ angle
UH - < 70HRC - Corner radius
609
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
UH
CUTTING PARAMETERS
UHF4LN
SQUARE RIB
Material Group
ISO 513 P3 P4 P5 K2 K3 P6 K4 H1 H4 H5 H2 H3
Hardness/Rm < 45 HRC 45 - 55 HRC 55 - 60 HRC 60 - 65 HRC
ap x ae ap x D ap x D ap x D ap x D
Vc (m/min) 80-120 60-100 50-70 30-50
D
(mm)
l1
(mm)
ae
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
1
≤ 6D 0.05 31800 0.010 1300 25440 0.009 930 19080 0.008 625 12720 0.007 365
≤ 8D 0.04 28700 0.009 1000 22960 0.008 720 17220 0.007 480 11480 0.006 280
≤ 10D 0.04 25500 0.007 730 20400 0.006 520 15300 0.006 350 10200 0.005 205
≤ 12D 0.03 22300 0.006 500 17840 0.005 360 13380 0.004 240 8920 0.004 140
1.5
≤ 6D 0.08 21200 0.021 1800 16960 0.019 1300 12720 0.017 865 8480 0.015 505
≤ 8D 0.06 19100 0.018 1380 15280 0.016 990 11460 0.014 660 7640 0.013 385
≤ 10D 0.05 17000 0.015 1010 13600 0.013 730 10200 0.012 485 6800 0.010 285
≤ 12D 0.04 14900 0.012 700 11920 0.011 500 8940 0.009 335 5960 0.008 195
≤ 15D 0.03 12700 0.010 490 10160 0.009 350 7620 0.008 235 5080 0.007 135
> 15D 0.02 10600 0.006 270 8480 0.006 190 6360 0.005 130 4240 0.004 75
2
≤ 6D 0.10 15900 0.026 1620 12720 0.023 1170 9540 0.020 780 6360 0.018 455
≤ 8D 0.09 14300 0.022 1240 11440 0.020 890 8580 0.017 595 5720 0.015 345
≤ 10D 0.07 12700 0.018 910 10160 0.016 650 7620 0.014 435 5080 0.012 255
≤ 12D 0.06 11100 0.014 620 8880 0.013 450 6660 0.011 300 4440 0.010 175
≤ 15D 0.05 9600 0.011 440 7680 0.010 320 5760 0.009 210 3840 0.008 125
> 15D 0.03 9600 0.008 290 7680 0.007 210 5760 0.006 140 3840 0.005 80
2.5
≤ 6D 0.13 12700 0.030 1510 10160 0.027 1090 7620 0.024 725 5080 0.021 425
≤ 8D 0.11 11500 0.025 1160 9200 0.023 840 6900 0.020 560 4600 0.018 325
≤ 10D 0.09 10200 0.021 850 8160 0.019 610 6120 0.017 410 4080 0.015 240
≤ 12D 0.07 8900 0.016 580 7120 0.015 420 5340 0.013 280 3560 0.011 165
≤ 15D 0.06 7600 0.013 410 6080 0.012 290 4560 0.011 195 3040 0.009 115
> 15D 0.04 7600 0.009 270 6080 0.008 200 4560 0.007 130 3040 0.006 75
3
≤ 6D 0.15 10600 0.034 1440 8480 0.031 1040 6360 0.027 690 4240 0.024 405
≤ 8D 0.13 9600 0.029 1110 7680 0.026 800 5760 0.023 535 3840 0.020 310
≤ 10D 0.11 8500 0.024 810 6800 0.021 580 5100 0.019 390 3400 0.017 225
≤ 12D 0.08 7400 0.019 550 5920 0.017 400 4440 0.015 265 2960 0.013 155
≤ 15D 0.07 6400 0.015 390 5120 0.014 280 3840 0.012 190 2560 0.011 110
> 15D 0.05 6400 0.010 260 5120 0.009 190 3840 0.008 125 2560 0.007 75
4
≤ 6D 0.20 8000 0.043 1360 6400 0.038 980 4800 0.034 655 3200 0.030 380
≤ 8D 0.17 7200 0.036 1040 5760 0.033 750 4320 0.029 500 2880 0.025 290
≤ 10D 0.14 6400 0.030 760 5120 0.027 550 3840 0.024 365 2560 0.021 215
≤ 12D 0.11 5600 0.023 520 4480 0.021 380 3360 0.019 250 2240 0.016 145
≤ 15D 0.09 4800 0.019 370 3840 0.017 260 2880 0.015 175 1920 0.013 105
> 15D 0.06 4800 0.013 240 3840 0.011 180 2880 0.010 120 1920 0.009 70
UH - < 70HRC - Corner radius
610
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
UH
h stock standard f non-standard stock m stock exhaustion
D D Tol. CR CR Tol. d(h6) l l1 d1 L z EDP No. Stock
20/-0.030 0.50 +/-0.020 6 1 6 1.95 70 4 UHF405020 h
30/-0.030 0.50 +/-0.020 6 1.2 8 2.85 70 4 UHF405030 h
40/-0.030 0.50 +/-0.020 6 1.5 10 3.85 70 4 UHF405040 h
50/-0.030 0.50 +/-0.020 6 2 10 4.85 70 4 UHF405050 h
60/-0.030 0.50 +/-0.020 6 2.5 12 5.85 90 4 UHF405060 h
60/-0.030 1.00 +/-0.020 6 2.5 12 5.85 90 4 UHF410060 h
80/-0.030 1.00 +/-0.020 8 3.5 16 7.7 100 4 UHF410080 h
10 0/-0.030 1.00 +/-0.020 10 4 20 9.7 100 4 UHF410100 h
80/-0.030 2.00 +/-0.020 8 3.5 16 7.7 100 4 UHF420080 h
10 0/-0.030 2.00 +/-0.020 10 4 20 9.7 100 4 UHF420100 h
12 0/-0.030 2.00 +/-0.020 12 5 25 11.7 110 4 UHF420120 h
12 0/-0.030 3.00 +/-0.020 12 5 25 11.7 110 4 UHF430120 h
UHF4
cylindrical shank, 4F corner radius
OSAWA
NORM
<70
PMKNSH
,, +
+ 1st choice , suitable
SIDE MILLING
CR
CR
UH - < 70HRC - Corner radius
611
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
UH
CUTTING PARAMETERS
UHF4
SIDE MILLING
Material
Group
ISO 513
P3 P4 P5 K2 K3 P6 K4 H1 H4 H5 H2 H3
Hardness/Rm < 45 HRC 45 - 55 HRC 55 - 60 HRC 60 - 65 HRC
ap x ae 0.03D x 0.4D 0.03D x 0.3D 0.02D x 0.3D 0.02D x 0.3D
Vc (m/min) 110-150 90-130 60-100 50-70
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
220700 0.033 2710 17520 0.029 2070 12740 0.026 1335 9550 0.023 875
313800 0.050 2730 11680 0.045 2080 8490 0.040 1345 6370 0.035 885
410350 0.068 2790 8760 0.061 2130 6370 0.054 1375 4780 0.047 905
58280 0.086 2830 7010 0.077 2160 5100 0.068 1395 3820 0.060 915
66900 0.104 2860 5840 0.093 2180 4250 0.083 1410 3180 0.072 920
85180 0.122 2520 4380 0.109 1920 3180 0.097 1235 2390 0.085 815
10 4140 0.140 2310 3500 0.126 1760 2550 0.112 1140 1910 0.098 745
12 3450 0.158 2170 2920 0.142 1660 2120 0.126 1070 1590 0.110 700
ap x ae D2 - D3 0.02D x 0.3D 0.02D x 0.25D 0.01D x 0.02D 0.01D x 0.02D
UH - < 70HRC - Corner radius
612
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
UH
h stock standard f non-standard stock m stock exhaustion
D D Tol. CR CR Tol. d(h6) l l1 d1 L z EDP No. Stock
10/-0.012 0.10 +/-0.010 4 2 3 0.95 50 4 UHCS4010 h
1.5 0/-0.012 0.10 +/-0.010 4 2.5 4 1.45 50 4 UHCS4015 h
20/-0.012 0.10 +/-0.010 4 3 6 1.95 50 4 UHCS4020 h
30/-0.012 0.10 +/-0.010 6 4 8 2.85 55 4 UHCS4030 h
40/-0.012 0.10 +/-0.010 6 6 10 3.85 55 4 UHCS4040 h
50/-0.012 0.20 +/-0.010 6 6 11 4.85 50 4 UHCS4050 h
60/-0.012 0.20 +/-0.010 6 9 15 5.85 60 4 UHCS4060 h
80/-0.015 0.20 +/-0.015 8 12 20 7.70 70 4 UHCS4080 h
10 0/-0.015 0.20 +/-0.015 10 15 25 9.70 70 4 UHCS4100 h
12 0/-0.015 0.30 +/-0.015 12 18 30 11.70 80 4 UHCS4120 h
UHCS4
cylindrical shank, 4F, reduced neck, corner radius
OSAWA
NORM
<70
PMKNSH
,, +
+ 1st choice , suitable
SIDE MILLING
CR
CR
UH - < 70HRC - Corner radius
613
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
UH
CUTTING PARAMETERS
UHCS4
SIDE MILLING
Material
Group
ISO 513
P3 P4 P5 K2 K3 P6 K4 H1 H4 H5 H2 H3
Hardness/Rm < 45 HRC 45 - 55 HRC 55 - 60 HRC 60 - 65 HRC
ap x ae 0.3D x D 0.2D x D 0.2D x D 0.1D x D
Vc (m/min) 90-130 60-100 50-70 30-50
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
130000 0.010 1200 25480 0.009 920 19110 0.008 610 12740 0.007 355
217520 0.020 1400 12740 0.018 920 9550 0.016 610 6370 0.014 355
311680 0.030 1400 8490 0.027 920 6370 0.024 610 4250 0.021 355
48760 0.040 1400 6370 0.036 920 4780 0.032 610 3180 0.028 355
57010 0.045 1260 5100 0.041 830 3820 0.036 550 2550 0.032 320
65840 0.050 1170 4250 0.045 770 3180 0.040 510 2120 0.035 295
84380 0.065 1140 3180 0.059 740 2390 0.052 495 1590 0.046 290
10 3500 0.085 1190 2550 0.077 780 1910 0.068 520 1270 0.060 300
12 2920 0.100 1170 2120 0.090 760 1590 0.080 510 1060 0.070 295
UH - < 70HRC - Corner radius
614
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
UH
h stock standard f non-standard stock m stock exhaustion
D D Tol. CR CR Tol. d(h6) l l1 L z EDP No. Stock
10/-0.020 0.20 +/-0.010 6 3 50 4 UH41001002 h
1.5 0/-0.020 0.20 +/-0.010 6 4.5 50 4 UH41001502 h
20/-0.020 0.30 +/-0.010 6 6.5 50 4 UH41002003 h
2.5 0/-0.020 0.30 +/-0.010 6 6.5 50 4 UH41002503 h
2.5 0/-0.020 0.50 +/-0.010 6 6.5 50 4 UH41002505 h
30/-0.025 0.20 +/-0.010 6 9 50 4 UH41003002 h
30/-0.025 0.30 +/-0.010 6 9 50 4 UH41003003 h
30/-0.025 0.50 +/-0.010 6 9 50 4 UH41003005 h
40/-0.025 0.30 +/-0.010 6 12 50 4 UH41004003 h
40/-0.025 0.50 +/-0.010 6 12 50 4 UH41004005 h
40/-0.025 1.00 +/-0.010 6 12 50 4 UH41004010 h
50/-0.025 0.30 +/-0.010 6 15 50 4 UH41005003 h
50/-0.025 0.50 +/-0.010 6 15 50 4 UH41005005 h
50/-0.025 1.00 +/-0.010 6 15 50 4 UH41005010 h
60/-0.025 0.30 +/-0.010 6 16 50 4 UH41006003 h
60/-0.025 0.50 +/-0.010 6 16 50 4 UH41006005 h
60/-0.025 1.00 +/-0.010 6 16 50 4 UH41006010 h
80/-0.030 0.30 +/-0.010 8 20 64 4 UH41008003 h
80/-0.030 0.50 +/-0.010 8 20 64 4 UH41008005 h
80/-0.030 1.00 +/-0.010 8 20 64 4 UH41008010 h
80/-0.030 1.50 +/-0.010 8 20 64 4 UH41008015 h
80/-0.030 2.00 +/-0.010 8 20 64 4 UH41008020 h
10 0/-0.030 0.30 +/-0.010 10 22 70 4 UH41010003 h
10 0/-0.030 0.50 +/-0.010 10 22 70 4 UH41010005 h
10 0/-0.030 1.00 +/-0.010 10 22 70 4 UH41010010 h
10 0/-0.030 1.50 +/-0.010 10 22 70 4 UH41010015 h
10 0/-0.030 2.00 +/-0.010 10 22 70 4 UH41010020 h
12 0/-0.030 0.30 +/-0.010 12 25 75 4 UH41012003 h
12 0/-0.030 0.50 +/-0.010 12 25 75 4 UH41012005 h
12 0/-0.030 1.00 +/-0.010 12 25 75 4 UH41012010 h
12 0/-0.030 1.50 +/-0.010 12 25 75 4 UH41012015 h
12 0/-0.030 2.00 +/-0.010 12 25 75 4 UH41012020 h
12 0/-0.030 3.00 +/-0.010 12 25 75 4 UH41012030 h
14 0/-0.030 0.50 +/-0.010 14 32 90 4 UH41014005 h
14 0/-0.030 1.00 +/-0.010 14 32 90 4 UH41014010 h
14 0/-0.030 2.00 +/-0.010 14 32 90 4 UH41014020 f
16 0/-0.030 0.30 +/-0.010 16 32 90 4 UH41016003 f
16 0/-0.030 0.50 +/-0.010 16 32 90 4 UH41016005 h
16 0/-0.030 1.00 +/-0.010 16 32 90 4 UH41016010 h
UH410
cylindrical shank, 4F, corner radius
OSAWA
NORM
<70
PMKNSH
,, +
+ 1st choice , suitable
SIDE MILLING
CR
CR
UH - < 70HRC - Corner radius
615
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
UH
h stock standard f non-standard stock m stock exhaustion
D D Tol. CR CR Tol. d(h6) l l1 L z EDP No. Stock
16 0/-0.030 1.50 +/-0.010 16 32 90 4 UH41016015 f
16 0/-0.030 2.00 +/-0.010 16 32 90 4 UH41016020 h
16 0/-0.030 3.00 +/-0.010 16 32 90 4 UH41016030 f
18 0/-0.030 0.50 +/-0.010 18 38 100 4 UH41018005 f
18 0/-0.030 1.00 +/-0.010 18 38 100 4 UH41018010 h
18 0/-0.030 2.00 +/-0.010 18 38 100 4 UH41018020 f
20 0/-0.030 0.30 +/-0.010 20 38 100 4 UH41020003 f
20 0/-0.030 0.50 +/-0.010 20 38 100 4 UH41020005 h
20 0/-0.030 1.00 +/-0.010 20 38 100 4 UH41020010 h
20 0/-0.030 1.50 +/-0.010 20 38 100 4 UH41020015 f
20 0/-0.030 2.00 +/-0.010 20 38 100 4 UH41020020 h
20 0/-0.030 3.00 +/-0.010 20 38 100 4 UH41020030 f
UH410
cylindrical shank, 4F, corner radius
OSAWA
NORM
<70
PMKNSH
,, +
+ 1st choice , suitable
SIDE MILLING
CR
CR
UH - < 70HRC - Corner radius
616
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
UH
CUTTING PARAMETERS
UH410
SIDE MILLING
Material
Group
ISO 513
P3 P4 P5 K2 K3 P6 K4 H1 H4 H5 H2 H3
Hardness/Rm < 45 HRC 45 - 55 HRC 55 - 60 HRC 60 - 65 HRC
ap x ae D x 0.05D D x 0.05D D x 0.05D D x 0.05D
Vc (m/min) 90-130 60-100 50-70 30-50
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
135030 0.010 1400 25480 0.009 920 19110 0.008 575 12740 0.007 330
217520 0.018 1260 12740 0.016 830 9550 0.014 550 6370 0.013 320
311680 0.027 1260 8490 0.024 830 6370 0.022 550 4250 0.019 320
48760 0.036 1260 6370 0.032 830 4780 0.029 550 3180 0.025 320
57010 0.041 1140 5100 0.036 740 3820 0.032 495 2550 0.028 290
65840 0.045 1050 4250 0.041 690 3180 0.036 460 2120 0.032 265
84380 0.059 1020 3180 0.053 670 2390 0.047 445 1590 0.041 260
10 3500 0.077 1070 2550 0.069 700 1910 0.061 470 1270 0.054 270
12 2920 0.090 1050 2120 0.081 690 1590 0.072 460 1060 0.063 265
14 2500 0.102 1020 1820 0.092 670 1360 0.082 445 910 0.071 260
16 2190 0.114 1000 1590 0.103 650 1190 0.091 435 800 0.080 255
18 1950 0.126 980 1420 0.113 640 1060 0.101 425 710 0.088 250
20 1750 0.138 970 1270 0.124 630 960 0.110 425 640 0.097 245
UH - < 70HRC - Corner radius
617
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
UH
h stock standard f non-standard stock m stock exhaustion
D D Tol. CR CR Tol. d(h6) l l1 d1 L z EDP No. Stock
30/-0.012 0.30 +/-0.010 6 4 12 2.85 55 4 UH4110300312 h
30/-0.012 0.30 +/-0.010 6 4 20 2.85 60 4 UH4110300320 h
30/-0.012 0.50 +/-0.010 6 4 10 2.85 55 4 UH4110300510 h
30/-0.012 0.50 +/-0.010 6 4 20 2.85 60 4 UH4110300520 h
40/-0.012 0.30 +/-0.010 6 6 12 3.85 55 4 UH4110400312 h
40/-0.012 0.30 +/-0.010 6 6 20 3.85 60 4 UH4110400320 h
40/-0.012 0.50 +/-0.010 6 6 12 3.85 55 4 UH4110400512 h
40/-0.012 0.50 +/-0.010 6 6 20 3.85 60 4 UH4110400520 h
40/-0.012 1.00 +/-0.010 6 6 12 3.85 55 4 UH4110401012 h
60/-0.012 0.50 +/-0.010 6 9 15 5.85 60 4 UH4110600520 h
60/-0.012 1.00 +/-0.010 6 9 15 5.85 60 4 UH4110601020 h
80/-0.015 0.50 +/-0.015 8 12 20 7.70 70 4 UH4110800525 h
80/-0.015 1.00 +/-0.015 8 12 20 7.70 70 4 UH4110801025 h
80/-0.015 2.00 +/-0.015 8 12 20 7.70 70 4 UH4110802025 h
10 0/-0.015 0.50 +/-0.015 10 15 25 9.70 70 4 UH4111000532 h
10 0/-0.015 1.00 +/-0.015 10 15 25 9.70 70 4 UH4111001032 h
10 0/-0.015 2.00 +/-0.015 10 15 25 9.70 70 4 UH4111002032 h
12 0/-0.015 0.50 +/-0.015 12 18 30 11.70 80 4 UH4111200538 h
12 0/-0.015 1.00 +/-0.015 12 18 30 11.70 80 4 UH4111201038 h
12 0/-0.015 2.00 +/-0.015 12 18 30 11.70 80 4 UH4111202038 h
UH411
cylindrical shank, 4F, reduced neck, corner radius, long
OSAWA
NORM
<70
PMKNSH
,, +
+ 1st choice , suitable
SIDE MILLING
CR
CR
UH - < 70HRC - Corner radius
618
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
UH
CUTTING PARAMETERS
UH411
SIDE MILLING
Material
Group
ISO 513
P3 P4 P5 K2 K3 P6 K4 H1 H4 H5 H2 H3
Hardness/Rm < 45 HRC 45 - 55 HRC 55 - 60 HRC 60 - 65 HRC
ap x ae D x 0.05D D x 0.05D D x 0.05D D x 0.05D
Vc (m/min) 90-130 60-100 50-70 30-50
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
311680 0.027 1260 8490 0.024 830 6370 0.022 550 4250 0.019 320
48760 0.036 1260 6370 0.032 830 4780 0.029 550 3180 0.025 320
57010 0.041 1140 5100 0.036 740 3820 0.032 495 2550 0.028 290
65840 0.045 1050 4250 0.041 690 3180 0.036 460 2120 0.032 265
84380 0.059 1020 3180 0.053 670 2390 0.047 445 1590 0.041 260
10 3500 0.077 1070 2550 0.069 700 1910 0.061 470 1270 0.054 270
12 2920 0.090 1050 2120 0.081 690 1590 0.072 460 1060 0.063 265
UH - < 70HRC - Corner radius
619
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
UH
h stock standard f non-standard stock m stock exhaustion
D D Tol. CR CR Tol. d(h6) l l1 d1 L z EDP No. Stock
20/-0.020 0.30 +/-0.010 6 4 30 1.90 75 4 UH4120200330 h
20/-0.020 0.30 +/-0.010 6 4 60 1.90 100 4 UH4120200360 h
30/-0.025 0.30 +/-0.010 6 5 30 2.80 75 4 UH4120300330 h
30/-0.025 0.30 +/-0.010 6 5 60 2.80 100 4 UH4120300360 h
30/-0.025 0.50 +/-0.010 6 5 30 2.80 75 4 UH4120300530 h
30/-0.025 0.50 +/-0.010 6 5 60 2.80 100 4 UH4120300560 h
40/-0.025 0.30 +/-0.010 6 8 32 3.70 75 4 UH4120400332 h
40/-0.025 0.30 +/-0.010 6 8 60 3.70 100 4 UH4120400360 h
40/-0.025 0.50 +/-0.010 6 8 32 3.70 75 4 UH4120400532 h
40/-0.025 0.50 +/-0.010 6 8 60 3.70 100 4 UH4120400560 h
60/-0.025 0.50 +/-0.010 6 9 20 5.85 90 4 UH4120600520 h
60/-0.025 1.00 +/-0.010 6 9 20 5.85 90 4 UH4120601020 h
80/-0.025 0.50 +/-0.015 8 12 25 7.70 100 4 UH4120800525 h
80/-0.025 1.00 +/-0.015 8 12 25 7.70 100 4 UH4120801025 h
10 0/-0.025 0.50 +/-0.015 10 15 32 9.70 100 4 UH4121000532 h
10 0/-0.025 1.00 +/-0.015 10 15 32 9.70 100 4 UH4121001032 h
10 0/-0.025 2.00 +/-0.015 10 15 32 9.70 100 4 UH4121002032 h
12 0/-0.025 0.50 +/-0.015 12 18 38 11.70 110 4 UH4121200538 h
12 0/-0.025 1.00 +/-0.015 12 18 38 11.70 110 4 UH4121201038 h
12 0/-0.025 2.00 +/-0.015 12 18 38 11.70 110 4 UH4121202038 h
UH412
cylindrical shank, 4F, reduced neck, corner radius, long
OSAWA
NORM
<70
PMKNSH
,, +
+ 1st choice , suitable
SIDE MILLING
CR
CR
UH - < 70HRC - Corner radius
620
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
UH
CUTTING PARAMETERS
UH412
SIDE MILLING
Material
Group
ISO 513
P3 P4 P5 K2 K3 P6 K4 H1 H4 H5 H2 H3
Hardness/Rm < 45 HRC 45 - 55 HRC 55 - 60 HRC 60 - 65 HRC
ap x ae D x 0.05D D x 0.05D D x 0.05D D x 0.05D
Vc (m/min) 80-120 60-100 50-70 30-50
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
215920 0.016 1030 12740 0.015 740 9550 0.013 495 6370 0.011 290
310620 0.024 1030 8490 0.022 740 6370 0.019 495 4250 0.017 290
47960 0.032 1030 6370 0.029 740 4780 0.026 495 3180 0.023 290
56370 0.036 930 5100 0.033 670 3820 0.029 445 2550 0.026 260
65310 0.041 860 4250 0.036 620 3180 0.032 410 2120 0.028 240
83980 0.053 840 3180 0.047 600 2390 0.042 405 1590 0.037 235
10 3180 0.069 880 2550 0.062 630 1910 0.055 420 1270 0.048 245
12 2650 0.081 860 2120 0.073 620 1590 0.065 410 1060 0.057 240
UH - < 70HRC - Corner radius
621
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
UH
h stock standard f non-standard stock m stock exhaustion
UH413
cylindrical shank, 4F, reduced neck, corner radius, long
OSAWA
NORM
<70
PMKNSH
,, +
+ 1st choice , suitable
SIDE MILLING
CR
D D Tol. CR CR Tol. d(h6) l l1 d1 L z EDP No. Stock
60/-0.025 0.30 +/-0.010 6 10 60 5.50 125 4 UH4130600360 h
60/-0.025 0.50 +/-0.010 6 10 60 5.50 125 4 UH4130600560 h
60/-0.025 1.00 +/-0.010 6 10 60 5.50 125 4 UH4130601060 h
80/-0.030 0.30 +/-0.010 8 12 60 7.40 125 4 UH4130800360 h
80/-0.030 0.50 +/-0.010 8 12 60 7.40 125 4 UH4130800560 h
80/-0.030 1.00 +/-0.010 8 12 60 7.40 125 4 UH4130801060 h
80/-0.030 2.00 +/-0.010 8 12 60 7.40 125 4 UH4130802060 h
10 0/-0.030 0.30 +/-0.010 10 14 85 9.20 125 4 UH4131000385 h
10 0/-0.030 0.50 +/-0.010 10 14 85 9.20 125 4 UH4131000585 h
10 0/-0.030 1.00 +/-0.010 10 14 85 9.20 125 4 UH4131001085 h
10 0/-0.030 2.00 +/-0.010 10 14 85 9.20 125 4 UH4131002085 h
12 0/-0.030 0.50 +/-0.010 12 16 110 11.00 150 4 UH41312005110 h
12 0/-0.030 1.00 +/-0.010 12 16 110 11.00 150 4 UH41312010110 h
12 0/-0.030 2.00 +/-0.010 12 16 110 11.00 150 4 UH41312020110 h
16 0/-0.030 0.50 +/-0.010 16 22 110 15.00 150 4 UH41316005110 h
16 0/-0.030 1.00 +/-0.010 16 22 110 15.00 150 4 UH41316010110 h
CR
UH - < 70HRC - Corner radius
622
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
UH
CUTTING PARAMETERS
UH413
SIDE MILLING
Material
Group
ISO 513
P3 P4 P5 K2 K3 P6 K4 H1 H4 H5 H2 H3
Hardness/Rm < 45 HRC 45 - 55 HRC 55 - 60 HRC 60 - 65 HRC
ap x ae D x 0.05D D x 0.05D D x 0.05D D x 0.05D
Vc (m/min) 70-110 60-80 40-60 30-50
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
64780 0.041 770 3720 0.036 540 2650 0.032 345 2120 0.028 240
83580 0.053 750 2790 0.047 530 1990 0.042 335 1590 0.037 235
10 2870 0.069 790 2230 0.062 550 1590 0.055 350 1270 0.048 245
12 2390 0.081 770 1860 0.073 540 1330 0.065 345 1060 0.057 240
16 1790 0.095 680 1390 0.086 480 1000 0.076 305 800 0.067 215
UH - < 70HRC - Corner radius
623
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
UH
h stock standard f non-standard stock m stock exhaustion
D D Tol. CR CR Tol. d(h6) l l1 d1 L z EDP No. Stock
60/-0.030 0.50 +/-0.015 6 6 15 5.50 50 6 UH610R05060 h
80/-0.030 0.50 +/-0.015 8 8 25 7.40 60 6 UH610R05080 h
10 0/-0.030 1.00 +/-0.015 10 10 30 9.20 70 6 UH610R10100 h
12 0/-0.030 1.00 +/-0.015 12 12 30 11.00 75 6 UH610R10120 h
UH610R
cylindrical shank, multi flute, reduced neck, corner radius
OSAWA
NORM
<70
PMKNSH
,, +
+ 1st choice , suitable
SIDE MILLING
CR
CR
UH - < 70HRC - Corner radius
624
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
UH
CUTTING PARAMETERS
UH610R
SIDE MILLING
Material
Group
ISO 513
P3 P4 P5 K2 K3 P6 K4 H1 H4 H5 H2 H3
Hardness/Rm < 45 HRC 45 - 55 HRC 55 - 60 HRC 60 - 65 HRC
ap x ae D x 0.1D D x 0.05D D x 0.05D D x 0.05D
Vc (m/min) 140-180 100-140 70-110 60-80
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
68490 0.018 920 6370 0.016 620 4780 0.014 410 3720 0.013 280
86370 0.028 1050 4780 0.025 710 3580 0.022 470 2790 0.019 320
10 5100 0.034 1030 3820 0.030 690 2870 0.027 460 2230 0.024 310
12 4250 0.041 1040 3180 0.037 700 2390 0.033 470 1860 0.029 320
UH - < 70 HRC - Corner radius
625
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
UH
h stock standard f non-standard stock m stock exhaustion
D D Tol. CR CR Tol. d(h6) l l1 L z EDP No. Stock
60/-0.030 0.50 +/-0.015 6 15 90 6 UH611R05060 h
80/-0.030 0.50 +/-0.015 8 20 100 6 UH611R05080 h
10 0/-0.030 0.50 +/-0.015 10 25 100 6 UH611R05100 h
10 0/-0.030 1.00 +/-0.015 10 25 100 6 UH611R10100 h
12 0/-0.030 0.50 +/-0.015 12 30 110 6 UH611R05120 h
12 0/-0.030 1.00 +/-0.015 12 30 110 6 UH611R10120 h
16 0/-0.030 1.00 +/-0.015 16 32 130 6 UH611R10160 h
20 0/-0.030 1.00 +/-0.015 20 38 140 6 UH611R10200 h
20 0/-0.030 2.00 +/-0.015 20 38 140 6 UH611R20200 h
UH611R
cylindrical shank, multi flute, long, corner radius
OSAWA
NORM
<70
PMKNSH
,, +
+ 1st choice , suitable
SIDE MILLING
CR
CR
UH - < 70 HRC - Corner radius
626
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
UH
CUTTING PARAMETERS
UH611R
SIDE MILLING
Material
Group
ISO 513
P3 P4 P5 K2 K3 P6 K4 H1 H4 H5 H2 H3
Hardness/Rm < 45 HRC 45 - 55 HRC 55 - 60 HRC 60 - 65 HRC
ap x ae 1.5D x 0.05D 1.5D x 0.05D 1.5D x 0.05D 1.5D x 0.05D
Vc (m/min) 110-150 90-130 60-80 40-60
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
66900 0.015 630 5840 0.014 480 3720 0.012 270 2650 0.011 170
85180 0.023 730 4380 0.021 550 2790 0.019 310 1990 0.016 200
10 4140 0.029 710 3500 0.026 540 2230 0.023 310 1590 0.020 190
12 3450 0.035 720 2920 0.031 550 1860 0.028 310 1330 0.024 190
14 2960 0.041 720 2500 0.037 550 1590 0.033 310 1140 0.029 200
16 2590 0.048 740 2190 0.043 570 1390 0.038 320 1000 0.034 200
18 2300 0.056 770 1950 0.050 590 1240 0.045 330 880 0.039 210
20 2070 0.066 820 1750 0.060 630 1110 0.053 350 800 0.046 220
UH - < 70 HRC - Ball nose
627
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
UH
h stock standard f non-standard stock m stock exhaustion
D D Tol. R R Tol. d(h6) l l1 L z EDP No. Stock
0.2 0/-0.020 0.10 0/-0.020 4 0.2 50 2 UHMB200204 h
0.3 0/-0.020 0.15 0/-0.020 4 0.3 50 2 UHMB200304 h
0.4 0/-0.020 0.20 0/-0.020 4 0.4 50 2 UHMB200404 h
0.5 0/-0.020 0.25 0/-0.020 4 0.4 50 2 UHMB200504 h
0.6 0/-0.020 0.30 0/-0.020 4 0.5 50 2 UHMB200604 h
0.8 0/-0.020 0.40 0/-0.020 4 0.6 50 2 UHMB200804 h
UHMB204
cylindrical shank, 2 flutes ball nose, miniature
OSAWA
NORM
<70
PMKNSH
,, +
+ 1st choice , suitable
COPYING
R
UH - < 70 HRC - Ball nose
628
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
UH
CUTTING PARAMETERS
UHMB204
COPYING
ae
ap
Material
Group
ISO 513
P3 P4 P5 K2 K3 P6 K4 H1 H4 H5 H2 H3
Hardness/Rm < 45 HRC 45 - 55 HRC 55 - 60 HRC 60 - 65 HRC
ap x ae 0.05D x 0.1D 0.05D x 0.1D 0.05D x 0.1D 0.05D x 0.1D
Vc (m/min) 80-120 60-100 50-70 30-50
D
(mm)
D (e.)
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
0.1 0.04 40000 0.004 320 40000 0.004 290 40000 0.003 255 40000 0.003 225
0.2 0.09 40000 0.006 480 40000 0.005 430 40000 0.005 385 40000 0.004 335
0.3 0.13 40000 0.008 640 40000 0.007 580 40000 0.006 510 40000 0.006 450
0.4 0.17 40000 0.010 800 40000 0.009 720 40000 0.008 640 31850 0.007 445
0.5 0.22 40000 0.012 960 40000 0.011 860 38220 0.010 735 25480 0.008 430
0.6 0.26 40000 0.015 1200 40000 0.014 1080 31850 0.012 765 21230 0.011 445
0.7 0.31 40000 0.018 1440 36400 0.016 1180 27300 0.014 785 18200 0.013 460
0.8 0.35 39810 0.020 1590 31850 0.018 1150 23890 0.016 765 15920 0.014 445
0.9 0.39 35390 0.023 1630 28310 0.021 1170 21230 0.018 780 14150 0.016 455
_
_
n
(rpm)
Vf
(mm/min)
15° x 1.1 x 1.1
UH - < 70 HRC - Ball nose
629
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
UH
h stock standard f non-standard stock m stock exhaustion
D D Tol. R R Tol. d(h6) l l1 L z EDP No. Stock
0.4 0/-0.020 0.20 0/-0.020 6 0.4 50 2 UHMB200406 h
0.5 0/-0.020 0.25 0/-0.020 6 0.5 50 2 UHMB200506 h
0.6 0/-0.020 0.30 0/-0.020 6 0.6 50 2 UHMB200606 h
0.8 0/-0.020 0.40 0/-0.020 6 0.8 50 2 UHMB200806 h
UHMB206
cylindrical shank, 2 flutes ball nose, miniature, 6mm. shank
OSAWA
NORM
<70
PMKNSH
,, +
+ 1st choice , suitable
COPYING
R
UH - < 70 HRC - Ball nose
630
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
UH
CUTTING PARAMETERS
UHMB206
COPYING
ae
ap
Material
Group
ISO 513
P3 P4 P5 K2 K3 P6 K4 H1 H4 H5 H2 H3
Hardness/Rm < 45 HRC 45 - 55 HRC 55 - 60 HRC 60 - 65 HRC
ap x ae 0.05D x 0.2D 0.05D x 0.2D 0.05D x 0.2D 0.05D x 0.2D
Vc (m/min) 80-120 60-100 50-70 30-50
D
(mm)
D (e.)
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
0.4 0.17 40000 0.010 800 40000 0.009 720 40000 0.008 640 31850 0.007 445
0.5 0.22 40000 0.012 960 40000 0.011 860 38220 0.010 735 25480 0.008 430
0.6 0.26 40000 0.015 1200 40000 0.014 1080 31850 0.012 765 21230 0.011 445
0.8 0.35 39810 0.020 1590 31850 0.018 1150 23890 0.016 765 15920 0.014 445
_
_
n
(rpm)
Vf
(mm/min)
15° x 1.1 x 1.1
UH - 45÷70 HRC
631
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
UH
h stock standard f non-standard stock m stock exhaustion
D D Tol. R R Tol. d(h6) l l1 d1 L z 30’ 1° 1°30’ 2° 3° EDP No. Stock
0.2 0/-0.020 0.10 0/-0.020 4 0.2 0.5 0.15 50 2 0.57 0.58 0.60 0.62 0.66 UHLNB2002005 h
0.2 0/-0.020 0.10 0/-0.020 4 0.2 1 0.15 50 2 1.08 1.12 1.15 1.19 1.27 UHLNB200201 h
0.2 0/-0.020 0.10 0/-0.020 4 0.2 1.5 0.15 50 2 1.60 1.65 1.71 1.76 1.89 UHLNB2002015 h
0.3 0/-0.020 0.15 0/-0.020 4 0.3 1 0.25 50 2 1.08 1.11 1.15 1.18 1.26 UHLNB200301 h
0.3 0/-0.020 0.15 0/-0.020 4 0.3 2 0.25 50 2 2.12 2.18 2.25 2.33 2.49 UHLNB200302 h
0.3 0/-0.020 0.15 0/-0.020 4 0.3 3 0.25 50 2 3.15 3.25 3.36 3.48 3.73 UHLNB200303 h
0.4 0/-0.020 0.20 0/-0.020 4 0.4 1 0.35 50 2 1.08 1.11 1.14 1.18 1.25 UHLNB200401 h
0.4 0/-0.020 0.20 0/-0.020 4 0.4 2 0.35 50 2 2.11 2.18 2.25 2.32 2.48 UHLNB200402 h
0.4 0/-0.020 0.20 0/-0.020 4 0.4 3 0.35 50 2 3.15 3.25 3.36 3.47 3.72 UHLNB200403 h
0.4 0/-0.020 0.20 0/-0.020 4 0.4 4 0.35 50 2 4.18 4.32 4.46 4.62 4.95 UHLNB200404 h
0.4 0/-0.020 0.20 0/-0.020 4 0.4 5 0.35 50 2 5.21 5.39 5.57 5.77 6.18 UHLNB200405 h
0.5 0/-0.020 0.25 0/-0.020 4 0.4 2 0.45 50 2 2.15 2.22 2.29 2.36 2.52 UHLNB200502 h
0.5 0/-0.020 0.25 0/-0.020 4 0.4 3 0.45 50 2 3.18 3.29 3.39 3.51 3.75 UHLNB200503 h
0.5 0/-0.020 0.25 0/-0.020 4 0.4 4 0.45 50 2 4.22 4.35 4.50 4.65 4.98 UHLNB200504 h
0.5 0/-0.020 0.25 0/-0.020 4 0.4 5 0.45 50 2 5.25 5.42 5.61 5.80 6.22 UHLNB200505 h
0.5 0/-0.020 0.25 0/-0.020 4 0.4 6 0.45 50 2 6.28 6.49 6.71 6.95 7.45 UHLNB200506 h
0.5 0/-0.020 0.25 0/-0.020 4 0.4 8 0.45 50 2 8.35 8.63 8.93 9.24 9.92 UHLNB200508 h
0.6 0/-0.020 0.30 0/-0.020 4 0.5 2 0.55 50 2 2.15 2.21 2.28 2.35 2.50 UHLNB200602 h
0.6 0/-0.020 0.30 0/-0.020 4 0.5 3 0.55 50 2 3.18 3.28 3.39 3.50 3.74 UHLNB200603 h
0.6 0/-0.020 0.30 0/-0.020 4 0.5 4 0.55 50 2 4.22 4.35 4.49 4.65 4.97 UHLNB200604 h
0.6 0/-0.020 0.30 0/-0.020 4 0.5 5 0.55 50 2 5.25 5.42 5.60 5.79 6.21 UHLNB200605 h
0.6 0/-0.020 0.30 0/-0.020 4 0.5 6 0.55 50 2 6.28 6.49 6.71 6.94 7.44 UHLNB200606 h
0.6 0/-0.020 0.30 0/-0.020 4 0.5 8 0.55 50 2 8.35 8.63 8.92 9.23 9.91 UHLNB200608 h
0.8 0/-0.020 0.40 0/-0.020 4 0.6 2 0.75 50 2 2.15 2.21 2.27 2.34 2.48 UHLNB200802 h
0.8 0/-0.020 0.40 0/-0.020 4 0.6 4 0.75 50 2 4.21 4.34 4.48 4.63 4.95 UHLNB200804 h
0.8 0/-0.020 0.40 0/-0.020 4 0.6 6 0.75 50 2 6.28 6.48 6.70 6.93 7.42 UHLNB200806 h
0.8 0/-0.020 0.40 0/-0.020 4 0.6 8 0.75 50 2 8.35 8.62 8.91 9.22 9.88 UHLNB200808 h
0.8 0/-0.020 0.40 0/-0.020 4 0.6 10 0.75 50 2 10.41 10.76 11.13 11.51 12.35 UHLNB200810 h
10/-0.020 0.50 0/-0.020 4 0.8 3 0.95 50 2 3.27 3.37 3.47 3.57 3.80 UHLNB201003 h
10/-0.020 0.50 0/-0.020 4 0.8 4 0.95 50 2 4.31 4.44 4.58 4.72 5.04 UHLNB201004 h
10/-0.020 0.50 0/-0.020 4 0.8 5 0.95 50 2 5.34 5.51 5.68 5.87 6.27 UHLNB201005 h
10/-0.020 0.50 0/-0.020 4 0.8 6 0.95 50 2 6.37 6.58 6.79 7.02 7.50 UHLNB201006 h
10/-0.020 0.50 0/-0.020 4 0.8 8 0.95 50 2 8.44 8.71 9.00 9.31 9.97 UHLNB201008 h
10/-0.020 0.50 0/-0.020 4 0.8 10 0.95 50 2 10.51 10.85 11.22 11.61 12.44 UHLNB201010 h
10/-0.020 0.50 0/-0.020 4 0.8 12 0.95 50 2 12.57 12.99 13.43 13.90 14.91 UHLNB201012 h
10/-0.020 0.50 0/-0.020 4 0.8 14 0.95 50 2 14.64 15.13 15.65 16.19 17.37 UHLNB201014 h
10/-0.020 0.50 0/-0.020 4 0.8 16 0.95 50 2 16.71 17.27 17.86 18.49 19.84 UHLNB201016 h
10/-0.020 0.50 0/-0.020 4 0.8 20 0.95 60 2 20.84 21.55 22.29 23.08 24.78 UHLNB201020 h
1.2 0/-0.020 0.60 0/-0.020 4 1 6 1.15 50 2 6.37 6.57 6.78 7.00 7.48 UHLNB201206 h
UHLNB2
cylindrical shank, 2 flutes ball nose, extended and
reduced neck, miniature
OSAWA
NORM
<70
PMKNSH
,, +
+ 1st choice , suitable
ROUND RIB
R
actual length
α
actual length according to _ angle
UH - 45÷70 HRC
632
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
UH
h stock standard f non-standard stock m stock exhaustion
D D Tol. R R Tol. d(h6) l l1 d1 L z 30’ 1° 1°30’ 2° 3° EDP No. Stock
1.2 0/-0.020 0.60 0/-0.020 4 1 8 1.15 50 2 8.44 8.71 8.99 9.30 9.95 UHLNB201208 h
1.2 0/-0.020 0.60 0/-0.020 4 1 10 1.15 50 2 10.50 10.85 11.21 11.59 12.42 UHLNB201210 h
1.2 0/-0.020 0.60 0/-0.020 4 1 12 1.15 50 2 12.57 12.98 13.42 13.89 14.88 UHLNB201212 h
1.4 0/-0.020 0.70 0/-0.020 4 1.1 8 1.35 50 2 8.43 8.70 8.98 9.28 9.93 UHLNB201408 h
1.4 0/-0.020 0.70 0/-0.020 4 1.1 12 1.35 50 2 12.57 12.98 13.41 13.87 14.86 UHLNB201412 h
1.4 0/-0.020 0.70 0/-0.020 4 1.1 16 1.35 50 2 16.70 17.26 17.84 18.46 19.80 UHLNB201416 h
1.5 0/-0.020 0.75 0/-0.020 4 1.2 8 1.45 50 2 8.43 8.70 8.98 9.27 9.91 UHLNB201508 h
1.5 0/-0.020 0.75 0/-0.020 4 1.2 12 1.45 50 2 12.57 12.97 13.41 13.86 14.85 UHLNB201512 h
1.5 0/-0.020 0.75 0/-0.020 4 1.2 16 1.45 50 2 16.70 17.25 17.84 18.45 19.78 UHLNB201516 h
1.5 0/-0.020 0.75 0/-0.020 4 1.2 18 1.45 60 2 18.77 19.39 20.05 20.75 22.25 UHLNB201518 h
1.5 0/-0.020 0.75 0/-0.020 4 1.2 20 1.45 60 2 20.84 21.53 22.26 23.04 24.72 UHLNB201520 h
1.6 0/-0.020 0.80 0/-0.020 4 1.3 8 1.55 50 2 8.43 8.69 8.97 9.27 9.90 UHLNB201608 h
1.6 0/-0.020 0.80 0/-0.020 4 1.3 12 1.55 50 2 12.56 12.97 13.40 13.86 14.84 UHLNB201612 h
1.6 0/-0.020 0.80 0/-0.020 4 1.3 16 1.55 50 2 16.70 17.25 17.83 18.45 19.77 UHLNB201616 h
1.6 0/-0.020 0.80 0/-0.020 4 1.3 20 1.55 60 2 20.83 21.53 22.26 23.03 - UHLNB201620 h
1.8 0/-0.020 0.90 0/-0.020 4 1.4 8 1.75 50 2 8.43 8.69 8.96 9.25 9.88 UHLNB201808 h
1.8 0/-0.020 0.90 0/-0.020 4 1.4 12 1.75 50 2 12.56 12.96 13.39 13.84 14.81 UHLNB201812 h
1.8 0/-0.020 0.90 0/-0.020 4 1.4 16 1.75 50 2 16.70 17.24 17.82 18.43 19.75 UHLNB201816 h
1.8 0/-0.020 0.90 0/-0.020 4 1.4 20 1.75 60 2 20.83 21.52 22.25 23.02 - UHLNB201820 h
20/-0.020 1.00 0/-0.020 4 1.6 4 1.95 50 2 4.29 4.40 4.52 4.65 4.92 UHLNB202004 h
20/-0.020 1.00 0/-0.020 4 1.6 6 1.95 50 2 6.36 6.54 6.74 6.94 7.39 UHLNB202006 h
20/-0.020 1.00 0/-0.020 4 1.6 8 1.95 50 2 8.42 8.68 8.95 9.24 9.86 UHLNB202008 h
20/-0.020 1.00 0/-0.020 4 1.6 10 1.95 50 2 10.49 10.82 11.17 11.53 12.32 UHLNB202010 h
20/-0.020 1.00 0/-0.020 4 1.6 12 1.95 50 2 12.56 12.96 13.38 13.83 14.79 UHLNB202012 h
20/-0.020 1.00 0/-0.020 4 1.6 14 1.95 50 2 14.62 15.10 15.59 16.12 17.26 UHLNB202014 h
20/-0.020 1.00 0/-0.020 4 1.6 16 1.95 50 2 16.69 17.23 17.81 18.42 19.73 UHLNB202016 h
20/-0.020 1.00 0/-0.020 4 1.6 18 1.95 60 2 18.76 19.37 20.02 20.71 - UHLNB202018 h
20/-0.020 1.00 0/-0.020 4 1.6 20 1.95 60 2 20.83 21.51 22.24 23.00 - UHLNB202020 h
20/-0.020 1.00 0/-0.020 4 1.6 22 1.95 60 2 22.89 23.65 24.45 25.30 - UHLNB202022 h
20/-0.020 1.00 0/-0.020 4 1.6 25 1.95 75 2 25.99 26.86 27.77 28.74 - UHLNB202025 h
20/-0.020 1.00 0/-0.020 4 1.6 30 1.95 75 2 31.16 32.21 33.31 - - UHLNB202030 h
30/-0.025 1.50 0/-0.020 6 2.4 8 2.85 50 2 8.60 8.84 9.10 9.37 9.96 UHLNB203008 h
30/-0.025 1.50 0/-0.020 6 2.4 10 2.85 50 2 10.67 10.98 11.32 11.67 12.43 UHLNB203010 h
30/-0.025 1.50 0/-0.020 6 2.4 12 2.85 50 2 12.73 13.12 13.53 13.96 14.90 UHLNB203012 h
30/-0.025 1.50 0/-0.020 6 2.4 16 2.85 60 2 16.87 17.40 17.96 18.55 19.83 UHLNB203016 h
30/-0.025 1.50 0/-0.020 6 2.4 20 2.85 60 2 21.00 21.68 22.39 23.14 24.77 UHLNB203020 h
30/-0.025 1.50 0/-0.020 6 2.4 25 2.85 75 2 26.17 27.02 27.93 28.88 - UHLNB203025 h
30/-0.025 1.50 0/-0.020 6 2.4 30 2.85 75 2 31.34 32.37 33.46 34.62 - UHLNB203030 h
30/-0.025 1.50 0/-0.020 6 2.4 35 2.85 75 2 36.51 37.72 39.00 40.35 - UHLNB203035 h
UHLNB2
cylindrical shank, 2 flutes ball nose, extended and
reduced neck, miniature
OSAWA
NORM
<70
PMKNSH
,, +
+ 1st choice , suitable
ROUND RIB
R
actual length
α
actual length according to _ angle
UH - 45÷70 HRC
633
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
UH
h stock standard f non-standard stock m stock exhaustion
D D Tol. R R Tol. d(h6) l l1 d1 L z 30’ 1° 1°30’ 2° 3° EDP No. Stock
40/-0.025 2.00 0/-0.020 6 3.2 10 3.85 50 2 10.84 11.15 11.47 11.81 12.54 UHLNB204010 h
40/-0.025 2.00 0/-0.020 6 3.2 16 3.85 60 2 17.04 17.56 18.11 18.69 19.94 UHLNB204016 h
40/-0.025 2.00 0/-0.020 6 3.2 20 3.85 60 2 21.18 21.84 22.54 23.28 - UHLNB204020 h
40/-0.025 2.00 0/-0.020 6 3.2 25 3.85 75 2 26.35 27.19 28.08 29.02 - UHLNB204025 h
40/-0.025 2.00 0/-0.020 6 3.2 30 3.85 75 2 31.51 32.53 33.61 - - UHLNB204030 h
40/-0.025 2.00 0/-0.020 6 3.2 35 3.85 75 2 36.68 37.88 39.15 - - UHLNB204035 h
40/-0.025 2.00 0/-0.020 6 3.2 40 3.85 100 2 41.85 43.23 - - - UHLNB204040 h
40/-0.025 2.00 0/-0.020 6 3.2 45 3.85 100 2 47.02 48.57 - - - UHLNB204045 h
40/-0.025 2.00 0/-0.020 6 3.2 50 3.85 100 2 52.19 53.92 - - - UHLNB204050 h
UHLNB2
cylindrical shank, 2 flutes ball nose, extended and
reduced neck, miniature
OSAWA
NORM
<70
PMKNSH
,, +
+ 1st choice , suitable
ROUND RIB
R
actual length
α
actual length according to _ angle
UH - 45÷70 HRC
634
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
UH
CUTTING PARAMETERS
UHLNB2
ROUND RIB
Material Group
ISO 513 P3 P4 P5 K2 K3 P6 K4 H1 H4 H5 H2 H3
Hardness/Rm < 45 HRC 45 - 55 HRC 55 - 60 HRC 60 - 65 HRC
ap x ae ap x 0.2D ap x 0.2D ap x 0.2D ap x 0.2D
Vc (m/min) 140-160 110-130 80-100 50-70
D
(mm)
l1
(mm)
ap
(mm)
D (e.)
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
0.2
≤ 6D 0.01 0.09 40000 0.008 640 40000 0.007 580 40000 0.006 510 40000 0.006 450
≤ 8D 0.01 0.08 40000 0.007 580 40000 0.006 470 40000 0.005 415 40000 0.005 365
≤ 10D 0.01 0.07 40000 0.006 510 40000 0.005 370 40000 0.004 330 40000 0.004 285
0.3
≤ 6D 0.02 0.13 40000 0.010 800 40000 0.009 720 40000 0.008 640 40000 0.007 560
≤ 8D 0.01 0.12 40000 0.009 720 40000 0.007 580 40000 0.006 520 40000 0.006 455
≤ 10D 0.01 0.11 40000 0.008 640 40000 0.006 460 40000 0.005 410 40000 0.004 360
0.4
≤ 6D 0.02 0.17 40000 0.013 1040 40000 0.012 940 40000 0.010 830 40000 0.009 730
≤ 8D 0.02 0.16 40000 0.012 940 40000 0.009 760 40000 0.008 675 40000 0.007 590
≤ 10D 0.01 0.15 40000 0.010 830 40000 0.007 600 40000 0.007 530 38220 0.006 445
0.5
≤ 6D 0.03 0.22 40000 0.017 1360 40000 0.015 1220 40000 0.014 1090 38220 0.012 910
≤ 8D 0.02 0.20 40000 0.015 1220 40000 0.012 990 40000 0.011 880 34390 0.010 665
≤ 10D 0.02 0.18 40000 0.014 1090 40000 0.010 780 40000 0.009 695 30570 0.008 465
0.6
≤ 6D 0.03 0.26 40000 0.021 1680 40000 0.019 1510 40000 0.017 1345 31850 0.015 935
≤ 8D 0.03 0.24 40000 0.019 1510 40000 0.015 1220 40000 0.014 1090 28660 0.012 685
≤ 10D 0.02 0.22 40000 0.017 1340 40000 0.012 970 38220 0.011 820 25480 0.009 480
0.8
≤ 6D 0.04 0.35 40000 0.025 2000 40000 0.023 1800 35830 0.020 1435 23890 0.018 835
≤ 8D 0.03 0.32 40000 0.023 1800 40000 0.018 1460 32250 0.016 1045 21500 0.014 610
≤ 10D 0.03 0.29 40000 0.020 1600 38220 0.014 1100 28660 0.013 735 19110 0.011 430
1
≤ 6D 0.05 0.44 40000 0.030 2400 38220 0.027 2060 28660 0.024 1375 19110 0.021 805
≤ 8D 0.04 0.40 40000 0.027 2160 34390 0.022 1500 25800 0.019 1005 17200 0.017 585
≤ 10D 0.04 0.37 38220 0.024 1830 30570 0.017 1060 22930 0.015 705 15290 0.013 410
≤ 12D 0.03 0.33 33440 0.021 1400 26750 0.013 710 20060 0.012 470 13380 0.010 275
> 12D 0.02 0.30 28660 0.018 1030 22930 0.010 450 17200 0.009 295 11460 0.008 175
1.2
≤ 6D 0.06 0.52 39810 0.035 2790 31850 0.032 2010 23890 0.028 1340 15920 0.025 780
≤ 8D 0.05 0.48 35830 0.032 2260 28660 0.026 1460 21500 0.023 975 14330 0.020 570
≤ 10D 0.04 0.44 31850 0.028 1780 25480 0.020 1030 19110 0.018 685 12740 0.016 400
≤ 12D 0.03 0.39 27870 0.025 1370 22290 0.015 690 16720 0.014 460 11150 0.012 270
> 12D 0.03 0.36 23890 0.021 1000 19110 0.011 430 14330 0.010 290 9550 0.009 170
1.5
≤ 6D 0.08 0.65 31850 0.045 2870 25480 0.041 2060 19110 0.036 1375 12740 0.032 805
≤ 8D 0.06 0.61 28660 0.041 2320 22930 0.033 1500 17200 0.029 1005 11460 0.026 585
≤ 10D 0.05 0.55 25480 0.036 1830 20380 0.026 1060 15290 0.023 705 10190 0.020 410
≤ 12D 0.04 0.49 22290 0.032 1400 17830 0.020 710 13380 0.018 470 8920 0.015 275
> 12D 0.03 0.44 19110 0.027 1030 15290 0.015 450 11460 0.013 295 7640 0.011 175
2
≤ 6D 0.10 0.87 23890 0.060 2870 19110 0.054 2060 14330 0.048 1375 9550 0.042 800
≤ 8D 0.09 0.81 21500 0.054 2320 17200 0.044 1500 12900 0.039 1005 8600 0.034 585
≤ 10D 0.07 0.74 19110 0.048 1830 15290 0.035 1060 11460 0.031 705 7640 0.027 410
≤ 12D 0.06 0.65 16720 0.042 1400 13380 0.026 710 10030 0.024 470 6690 0.021 275
> 12D 0.05 0.59 14330 0.036 1030 11460 0.019 450 8600 0.017 295 5730 0.015 175
2.5
≤ 6D 0.13 1.09 19110 0.060 2290 15290 0.054 1650 11460 0.048 1100 7640 0.042 640
≤ 8D 0.11 1.01 17200 0.054 1860 13760 0.044 1200 10320 0.039 800 6880 0.034 470
≤ 10D 0.09 0.92 15290 0.048 1470 12230 0.035 850 9170 0.031 565 6110 0.027 330
≤ 12D 0.07 0.82 13380 0.042 1120 10700 0.026 570 8030 0.024 380 5350 0.021 220
> 12D 0.06 0.74 11460 0.036 830 9170 0.019 360 6880 0.017 240 4590 0.015 140
3
≤ 6D 0.15 1.31 15920 0.075 2390 12740 0.068 1720 9550 0.060 1145 6370 0.053 670
≤ 8D 0.13 1.21 14330 0.068 1930 11460 0.055 1250 8600 0.049 835 5730 0.043 485
≤ 10D 0.11 1.10 12740 0.060 1530 10190 0.043 880 7640 0.038 585 5100 0.034 345
≤ 12D 0.08 0.98 11150 0.053 1170 8920 0.033 590 6690 0.029 395 4460 0.026 230
> 12D 0.07 0.89 9550 0.045 860 7640 0.024 370 5730 0.022 250 3820 0.019 145
_
_
n
(rpm)
Vf
(mm/min)
45° x 1.65 x 1.65
30° x 1.30 x 1.30
15° x 1.15 x 1.15
UH - 45÷70 HRC
635
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
UH
CUTTING PARAMETERS
UHLNB2
ROUND RIB
Material Group
ISO 513 P3 P4 P5 K2 K3 P6 K4 H1 H4 H5 H2 H3
Hardness/Rm < 45 HRC 45 - 55 HRC 55 - 60 HRC 60 - 65 HRC
ap x ae ap x 0.2D ap x 0.2D ap x 0.2D ap x 0.2D
Vc 140-160 110-130 80-100 50-70
D
(mm)
l1
(mm)
ap
(mm)
D (e.)
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
4
≤ 6D 0.20 1.74 11940 0.095 2270 9550 0.086 1630 7170 0.076 1090 4780 0.067 635
≤ 8D 0.17 1.61 10750 0.086 1840 8600 0.069 1190 6450 0.062 795 4300 0.054 465
≤ 10D 0.14 1.47 9550 0.076 1450 7640 0.055 840 5730 0.049 555 3820 0.043 325
≤ 12D 0.11 1.31 8360 0.067 1110 6690 0.042 560 5020 0.037 375 3340 0.033 220
> 12D 0.09 1.19 7170 0.057 820 5730 0.031 350 4300 0.027 235 2870 0.024 135
_
_
n
(rpm)
Vf
(mm/min)
45° x 1.65 x 1.65
30° x 1.30 x 1.30
15° x 1.15 x 1.15
UH - 45÷70 HRC
636
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
UH
h stock standard f non-standard stock m stock exhaustion
UHCRB2
cylindrical shank, 2 flutes ball nose, extended and
reduced neck, miniature, 6mm. shank
OSAWA
NORM
<70
PMKNSH
,, +
+ 1st choice , suitable
ROUND RIB
D D Tol. R R Tol. d(h6) l l1 d1 L z 30’ 1° 1°30’ 2° 3° EDP No. Stock
0.5 0/-0.012 0.25 +/-0.005 6 0.5 2 0.45 50 2 2.15 2.22 2.29 2.36 2.52 UHCRB20050156 h
0.5 0/-0.012 0.25 +/-0.005 6 0.5 4 0.45 50 2 4.22 4.35 4.50 4.65 4.98 UHCRB20050336 h
0.6 0/-0.012 0.30 +/-0.005 6 0.5 2 0.55 50 2 2.15 2.21 2.28 2.35 2.50 UHCRB20060206 h
0.6 0/-0.012 0.30 +/-0.005 6 0.5 4 0.55 50 2 4.22 4.35 4.49 4.65 4.97 UHCRB20060406 h
0.6 0/-0.012 0.30 +/-0.005 6 0.5 6 0.55 50 2 6.28 6.49 6.71 6.94 7.44 UHCRB20060606 h
0.8 0/-0.012 0.40 +/-0.005 6 0.8 2 0.75 50 2 2.15 2.21 2.27 2.34 2.48 UHCRB20080256 h
0.8 0/-0.012 0.40 +/-0.005 6 0.8 4 0.75 50 2 4.21 4.34 4.48 4.63 4.95 UHCRB20080406 h
0.8 0/-0.012 0.40 +/-0.005 6 0.8 6 0.75 50 2 6.28 6.48 6.70 6.93 7.42 UHCRB20080556 h
10/-0.012 0.50 +/-0.005 6 1 3 0.90 50 2 3.27 3.37 3.47 3.57 3.80 UHCRB20100336 h
10/-0.012 0.50 +/-0.005 6 1 6 0.90 50 2 6.37 6.58 6.79 7.02 7.50 UHCRB20100676 h
10/-0.012 0.50 +/-0.005 6 1 8 0.90 50 2 8.44 8.71 9.00 9.31 9.97 UHCRB20100806 h
10/-0.012 0.50 +/-0.005 6 1 10 0.90 50 2 10.51 10.85 11.22 11.61 12.44 UHCRB20101206 h
1.2 0/-0.012 0.60 +/-0.005 6 1.2 6 1.10 50 2 6.37 6.57 6.78 7.00 7.48 UHCRB20120606 h
1.2 0/-0.012 0.60 +/-0.005 6 1.2 8 1.10 50 2 8.44 8.71 8.99 9.30 9.95 UHCRB2012086 h
1.2 0/-0.012 0.60 +/-0.005 6 1.2 10 1.10 50 2 10.50 10.85 11.21 11.59 12.42 UHCRB20121006 h
1.5 0/-0.012 0.75 +/-0.005 6 1.5 4 1.40 50 2 4.30 4.42 4.55 4.68 4.98 UHCRB2015056 h
1.5 0/-0.012 0.75 +/-0.005 6 1.5 8 1.40 50 2 8.43 8.70 8.98 9.27 9.91 UHCRB20150806 h
1.5 0/-0.012 0.75 +/-0.005 6 1.5 10 1.40 50 2 10.50 10.84 11.19 11.57 12.38 UHCRB20150976 h
1.5 0/-0.012 0.75 +/-0.005 6 1.5 12 1.40 50 2 12.57 12.97 13.41 13.86 14.85 UHCRB2015156 h
1.5 0/-0.012 0.75 +/-0.005 6 1.5 16 1.40 50 2 16.70 17.25 17.84 18.45 19.78 UHCRB20151606 h
20/-0.012 1.00 +/-0.005 6 3 6 1.90 50 2 6.36 6.54 6.74 6.94 7.39 UHCRB2020066 h
20/-0.012 1.00 +/-0.005 6 3 8 1.90 50 2 8.42 8.68 8.95 9.24 9.86 UHCRB20200806 h
20/-0.012 1.00 +/-0.005 6 3 10 1.90 50 2 10.49 10.82 11.17 11.53 12.32 UHCRB20201006 h
20/-0.012 1.00 +/-0.005 6 3 12 1.90 50 2 12.56 12.96 13.38 13.83 14.79 UHCRB2020136 h
20/-0.012 1.00 +/-0.005 6 3 16 1.90 50 2 16.69 17.23 17.81 18.42 19.73 UHCRB20201606 h
20/-0.012 1.00 +/-0.005 6 3 20 1.90 50 2 20.83 21.51 22.24 23.00 24.66 UHCRB2020206 h
R
actual length
α
actual length according to _ angle
UH - 45÷70 HRC
637
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
UH
CUTTING PARAMETERS
UHCRB2
ROUND RIB
Material Group
ISO 513 P3 P4 P5 K2 K3 P6 K4 H1 H4 H5 H2 H3
Hardness/Rm < 45 HRC 45 - 55 HRC 55 - 60 HRC 60 - 65 HRC
ap x ae ap x 0.2D ap x 0.2D ap x 0.2D ap x 0.2D
Vc (m/min) 140-160 110-130 80-100 50-70
D
(mm)
l1
(mm)
ap
(mm)
D (e.)
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
0.5
≤ 6D 0.03 0.22 40000 0.020 1600 40000 0.018 1440 40000 0.016 1280 38220 0.014 1070
≤ 8D 0.02 0.20 40000 0.018 1440 40000 0.015 1170 40000 0.013 1035 34390 0.011 780
≤ 10D 0.02 0.18 40000 0.016 1280 40000 0.012 920 40000 0.010 820 30570 0.009 550
0.6
≤ 6D 0.03 0.26 40000 0.022 1760 40000 0.020 1580 40000 0.018 1410 31850 0.015 980
≤ 8D 0.03 0.24 40000 0.020 1580 40000 0.016 1280 40000 0.014 1140 28660 0.012 715
≤ 10D 0.02 0.22 40000 0.018 1410 40000 0.013 1010 38220 0.011 860 25480 0.010 500
0.8
≤ 6D 0.04 0.35 40000 0.025 2000 40000 0.023 1800 35830 0.020 1435 23890 0.018 835
≤ 8D 0.03 0.32 40000 0.023 1800 40000 0.018 1460 32250 0.016 1045 21500 0.014 610
≤ 10D 0.03 0.29 40000 0.020 1600 38220 0.014 1100 28660 0.013 735 19110 0.011 430
1
≤ 6D 0.05 0.44 40000 0.030 2400 38220 0.027 2060 28660 0.024 1375 19110 0.021 805
≤ 8D 0.04 0.40 40000 0.027 2160 34390 0.022 1500 25800 0.019 1005 17200 0.017 585
≤ 10D 0.04 0.37 38220 0.024 1830 30570 0.017 1060 19110 0.015 585 15290 0.013 410
≤ 12D 0.03 0.33 33440 0.021 1400 26750 0.013 710 16720 0.012 395 13380 0.010 275
> 12D 0.02 0.30 28660 0.018 1030 22930 0.010 450 14330 0.009 250 11460 0.008 175
1.2
≤ 6D 0.06 0.52 39810 0.035 2790 31850 0.032 2010 23890 0.028 1340 15920 0.025 780
≤ 8D 0.05 0.48 35830 0.032 2260 28660 0.026 1460 21500 0.023 975 14330 0.020 570
≤ 10D 0.04 0.44 31850 0.028 1780 25480 0.020 1030 19110 0.018 685 12740 0.016 400
≤ 12D 0.03 0.39 27870 0.025 1370 22290 0.015 690 16720 0.014 460 11150 0.012 270
> 12D 0.03 0.36 23890 0.021 1000 19110 0.011 430 14330 0.010 290 9550 0.009 170
1.5
≤ 6D 0.08 0.65 31850 0.045 2870 25480 0.041 2060 19110 0.036 1375 12740 0.032 805
≤ 8D 0.06 0.61 28660 0.041 2320 22930 0.033 1500 17200 0.029 1005 11460 0.026 585
≤ 10D 0.05 0.55 25480 0.036 1830 20380 0.026 1060 15290 0.023 705 10190 0.020 410
≤ 12D 0.04 0.49 22290 0.032 1400 17830 0.020 710 13380 0.018 470 8920 0.015 275
> 12D 0.03 0.44 19110 0.027 1030 15290 0.015 450 11460 0.013 295 7640 0.011 175
2
≤ 6D 0.10 0.87 23890 0.060 2870 19110 0.054 2060 14330 0.048 1375 9550 0.042 800
≤ 8D 0.09 0.81 21500 0.054 2320 17200 0.044 1500 12900 0.039 1005 8600 0.034 585
≤ 10D 0.07 0.74 19110 0.048 1830 15290 0.035 1060 11460 0.031 705 7640 0.027 410
≤ 12D 0.06 0.65 16720 0.042 1400 13380 0.026 710 10030 0.024 470 6690 0.021 275
> 12D 0.05 0.59 14330 0.036 1030 11460 0.019 450 8600 0.017 295 5730 0.015 175
_
_
n
(rpm)
Vf
(mm/min)
45° x 1.65 x 1.65
30° x 1.30 x 1.30
15° x 1.15 x 1.15
UH - 45÷70 HRC
638
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
UH
h stock standard f non-standard stock m stock exhaustion
D D Tol. R R Tol. d(h6) l l1 L z EDP No. Stock
10/-0.012 0.50 +/-0.005 6 1.5 40 2 UHCSB2010 h
1.5 0/-0.012 0.75 +/-0.005 6 2.5 40 2 UHCSB2015 h
20/-0.012 1.00 +/-0.005 6 3 40 2 UHCSB2020 h
2.5 0/-0.012 1.25 +/-0.005 6 3 50 2 UHCSB2025 h
30/-0.012 1.50 +/-0.005 6 4.5 50 2 UHCSB2030 h
40/-0.012 2.00 +/-0.005 6 6 50 2 UHCSB2040 h
50/-0.012 2.50 +/-0.005 6 7.5 50 2 UHCSB2050 h
60/-0.012 3.00 +/-0.010 6 9 50 2 UHCSB2060 h
80/-0.015 4.00 +/-0.010 8 12 50 2 UHCSB2080 h
10 0/-0.015 5.00 +/-0.010 10 15 60 2 UHCSB2100 h
12 0/-0.015 6.00 +/-0.010 12 18 60 2 UHCSB2120 h
14 0/-0.030 7.00 +/-0.020 14 32 90 2 UHCSB2140 h
16 0/-0.030 8.00 +/-0.020 16 32 90 2 UHCSB2160 h
18 0/-0.030 9.00 +/-0.020 18 38 100 2 UHCSB2180 h
20 0/-0.030 10.00 +/-0.020 20 38 100 2 UHCSB2200 h
UHCSB2
cylindrical shank, 2 flutes ball nose
OSAWA
NORM
<70
PMKNSH
,, +
+ 1st choice , suitable
COPYING
R
UH - 45÷70 HRC
639
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
UH
CUTTING PARAMETERS
UHCSB2
COPYING
ae
ap
Material
Group
ISO 513
P3 P4 P5 K2 K3 P6 K4 H1 H4 H5 H2 H3
Hardness/Rm < 45 HRC 45 - 55 HRC 55 - 60 HRC 60 - 65 HRC
ap x ae 0.05D x 0.2D 0.05D x 0.2D 0.05D x 0.2D 0.05D x 0.2D
Vc (m/min) 140-180 100-140 80-100 60-80
D
(mm)
D (e.)
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
1 0.44 40000 0.009 720 38220 0.008 620 28660 0.007 410 22290 0.006 280
1.5 0.65 33970 0.012 820 25480 0.011 550 19110 0.010 370 14860 0.008 250
2 0.87 25480 0.012 610 19110 0.011 410 14330 0.010 280 11150 0.008 190
2.5 1.09 20380 0.015 610 15290 0.014 410 11460 0.012 280 8920 0.011 190
3 1.31 16990 0.018 610 12740 0.016 410 9550 0.014 280 7430 0.013 190
4 1.74 12740 0.025 640 9550 0.023 430 7170 0.020 290 5570 0.018 190
5 2.18 10190 0.032 650 7640 0.029 440 5730 0.026 290 4460 0.022 200
6 2.62 8490 0.038 650 6370 0.034 440 4780 0.030 290 3720 0.027 200
8 3.49 6370 0.048 610 4780 0.043 410 3580 0.038 270 2790 0.034 190
10 4.36 5100 0.057 580 3820 0.051 390 2870 0.046 260 2230 0.040 180
12 5.23 4250 0.067 570 3180 0.060 380 2390 0.054 260 1860 0.047 170
14 6.10 3640 0.08 580 2730 0.072 390 2050 0.064 260 1590 0.056 180
16 6.97 3180 0.095 600 2390 0.086 410 1790 0.076 270 1390 0.067 180
18 7.85 2830 0.108 610 2120 0.097 410 1590 0.086 270 1240 0.076 190
20 8.72 2550 0.108 550 1910 0.097 370 1430 0.086 250 1110 0.076 170
_
_
n
(rpm)
Vf
(mm/min)
15° x 1.1 x 1.1
UH - 45÷70 HRC
640
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
UH
h stock standard f non-standard stock m stock exhaustion
D D Tol. R R Tol. d(h6) l l1 d1 L z EDP No. Stock
10/-0.012 0.50 +/-0.005 4 1 2.2 0.95 50 2 UH250010 h
1.5 0/-0.012 0.75 +/-0.005 4 1.5 3 1.45 50 2 UH250015 h
20/-0.012 1.00 +/-0.005 6 2 4 1.95 50 2 UH250020 h
2.5 0/-0.012 1.25 +/-0.005 6 4 10 2.40 50 2 UH250025 h
30/-0.012 1.50 +/-0.005 6 3 6 2.85 60 2 UH250030 h
40/-0.012 2.00 +/-0.005 6 4 8 3.85 70 2 UH250040 h
50/-0.012 2.50 +/-0.005 6 5 10 4.85 80 2 UH250050 h
60/-0.012 3.00 +/-0.010 6 6 12 5.85 90 2 UH250060 h
80/-0.015 4.00 +/-0.010 8 8 16 7.70 100 2 UH250080 h
10 0/-0.015 5.00 +/-0.010 10 10 20 9.70 100 2 UH250100 h
12 0/-0.015 6.00 +/-0.010 12 12 24 11.70 110 2 UH250120 h
14 0/-0.030 7.00 0/-0.020 14 32 80 13.00 125 2 UH250140 h
16 0/-0.030 8.00 0/-0.020 16 32 80 15.00 125 2 UH250160 h
18 0/-0.030 9.00 0/-0.020 18 38 80 17.00 125 2 UH250180 h
20 0/-0.030 10.00 0/-0.020 20 38 80 19.00 125 2 UH250200 h
UH250
cylindrical shank, 2 flutes ball nose, long reach
and reduced neck
OSAWA
NORM
<70
PMKNSH
,, +
+ 1st choice , suitable
COPYING
R
UH - 45÷70 HRC
641
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
UH
CUTTING PARAMETERS
UH250
_ 45°
Material
Group
ISO 513
P3 P4 P5 K2 K3 P6 K4 H1 H4 H5 H2 H3
Hardness/Rm < 45 HRC 45 - 55 HRC 55 - 60 HRC 60 - 65 HRC
ap x ae 0.05D x 0.2D 0.05D x 0.2D 0.05D x 0.2D 0.05D x 0.2D
Vc (m/min) 120-160 90-130 70-90 50-70
D
(mm)
D (e.)
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
1 0.44 30000 0.015 900 30000 0.014 810 25480 0.012 610 19110 0.011 400
2 0.87 22290 0.021 950 17520 0.019 670 12740 0.017 430 9550 0.015 280
3 1.31 14860 0.027 810 11680 0.024 570 8490 0.022 370 6370 0.019 240
4 1.74 11150 0.037 820 8760 0.033 580 6370 0.029 370 4780 0.026 240
5 2.18 8920 0.045 800 7010 0.041 570 5100 0.036 370 3820 0.032 240
6 2.62 7430 0.051 760 5840 0.046 540 4250 0.041 350 3180 0.036 230
8 3.49 5570 0.060 660 4380 0.054 470 3180 0.048 300 2390 0.042 200
10 4.36 4460 0.068 610 3500 0.061 430 2550 0.054 280 1910 0.048 180
12 5.23 3720 0.077 570 2920 0.069 400 2120 0.061 260 1590 0.054 170
14 6.10 3180 0.089 570 2500 0.080 400 1820 0.071 260 1360 0.062 170
16 6.97 2790 0.102 570 2190 0.092 400 1590 0.082 260 1190 0.071 170
18 7.85 2480 0.115 570 1950 0.103 400 1420 0.092 260 1060 0.080 170
20 8.72 2230 0.132 590 1750 0.119 420 1270 0.106 270 960 0.092 180
COPYING
ae
ap
_
n
(rpm)
Vf
(mm/min)
30° x 0.8 x 0.8
15° x 0.7 x 0.7
0° x 0.6 x 0.6
UH - 45÷70 HRC
642
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
UH
h stock standard f non-standard stock m stock exhaustion
UH253
cylindrical shank, 2 flutes ball nose, extra-long reach
and reduced neck
OSAWA
NORM
<70
PMKNSH
,, +
+ 1st choice , suitable
COPYING
D D Tol. R R Tol. d(h6) l l1 d1 L z EDP No. Stock
10/-0.020 0.50 0/-0.020 6 3 7 0.90 75 2 UH25301075 h
10/-0.020 0.50 0/-0.020 6 3 10 0.90 100 2 UH253010100 h
1.5 0/-0.020 0.75 0/-0.020 6 3 10 1.40 75 2 UH25301575 h
1.5 0/-0.020 0.75 0/-0.020 6 3 15 1.40 100 2 UH253015100 h
20/-0.020 1.00 0/-0.020 6 4 14 1.90 75 2 UH25302075 h
20/-0.020 1.00 0/-0.020 6 4 20 1.90 100 2 UH253020100 h
2.5 0/-0.020 1.25 0/-0.020 6 4 18 2.40 75 2 UH25302575 h
30/-0.025 1.50 0/-0.020 6 5 21 2.80 75 2 UH25303075 h
30/-0.025 1.50 0/-0.020 6 5 30 2.80 100 2 UH253030100 h
40/-0.025 2.00 0/-0.020 6 8 28 3.70 75 2 UH25304075 h
40/-0.025 2.00 0/-0.020 6 8 40 3.70 100 2 UH253040100 h
50/-0.025 2.50 0/-0.020 6 9 50 4.60 100 2 UH253050100 h
60/-0.025 3.00 0/-0.020 6 10 60 5.50 100 2 UH253060100 h
60/-0.025 3.00 0/-0.020 6 10 60 5.50 150 2 UH253060150 h
80/-0.030 4.00 0/-0.020 8 12 60 7.40 100 2 UH253080100 h
80/-0.030 4.00 0/-0.020 8 12 80 7.40 150 2 UH253080150 h
10 0/-0.030 5.00 0/-0.020 10 14 85 9.20 125 2 UH253100125 h
10 0/-0.030 5.00 0/-0.020 10 14 100 9.20 150 2 UH253100150 h
12 0/-0.030 6.00 0/-0.020 12 16 85 11.00 125 2 UH253120125 h
12 0/-0.030 6.00 0/-0.020 12 16 110 11.00 150 2 UH253120150 h
14 0/-0.030 7.00 0/-0.020 14 32 110 13.00 150 2 UH253140150 h
14 0/-0.030 7.00 0/-0.020 14 32 150 13.00 200 2 UH253140200 h
16 0/-0.030 8.00 0/-0.020 16 32 110 15.00 150 2 UH253160150 h
16 0/-0.030 8.00 0/-0.020 16 32 150 15.00 200 2 UH253160200 h
20 0/-0.030 10.00 0/-0.020 20 38 110 19.00 150 2 UH253200150 h
20 0/-0.030 10.00 0/-0.020 20 38 150 19.00 200 2 UH253200200 h
R
UH - 45÷70 HRC
643
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
HSS/CO-HSSP
END MILLS
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
UH
CUTTING PARAMETERS
UH253
_ 45°
Material
Group
ISO 513
P3 P4 P5 K2 K3 P6 K4 H1 H4 H5 H2 H3
Hardness/Rm < 45 HRC 45 - 55 HRC 55 - 60 HRC 60 - 65 HRC
ap x ae 0.05D x 0.2D 0.05D x 0.2D 0.05D x 0.2D 0.05D x 0.2D
Vc (m/min) 110-150 80-120 60-80 40-60
D
(mm)
D (e.)
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
1 0.44 30000 0.021 1280 30000 0.019 1150 22290 0.017 760 15920 0.015 470
2 0.87 20700 0.021 880 15920 0.019 610 11150 0.017 380 7960 0.015 240
3 1.31 13800 0.027 750 10620 0.024 520 7430 0.022 320 5310 0.019 200
4 1.74 10350 0.037 760 7960 0.033 520 5570 0.029 330 3980 0.026 200
5 2.18 8280 0.045 750 6370 0.041 520 4460 0.036 320 3180 0.032 200
6 2.62 6900 0.051 700 5310 0.046 490 3720 0.041 300 2650 0.036 190
8 3.49 5180 0.060 620 3980 0.054 430 2790 0.048 270 1990 0.042 170
10 4.36 4140 0.068 560 3180 0.061 390 2230 0.054 240 1590 0.048 150
12 5.23 3450 0.077 530 2650 0.069 360 1860 0.061 230 1330 0.054 140
14 6.10 2960 0.089 530 2270 0.080 360 1590 0.071 230 1140 0.062 140
16 6.97 2590 0.102 530 1990 0.092 370 1390 0.082 230 1000 0.071 140
18 7.85 2300 0.115 530 1770 0.103 370 1240 0.092 230 880 0.080 140
20 8.72 2070 0.132 550 1590 0.119 380 1110 0.106 230 800 0.092 150
COPYING
ae
ap
_
n
(rpm)
Vf
(mm/min)
30° x 0.8 x 0.8
15° x 0.7 x 0.7
0° x 0.6 x 0.6
HSS END MILLS
CAPTION . 646
SELECTION GUIDE . 650
SYSTEM CHARTS . 654
2 FLUTES . 658
2 FLUTE ALU . 663
3 FLUTES . 665
3 FLUTES 50° HELIX . 669
4-6 FLUTES . 671
ROUGHING HR - NR . 675
2 FLUTES BALL NOSE . 681
SHELL . 685
CORNER ROUNDING . 689
DOVETAIL . 691
T-SLOT . 695
WOODRUFF . 697
Caption
Legenda Verzeichnis Légende Leyenda Условные обозначения
646
STOCK
h
stock standard
stock standard
Standard Lager
stock standard
stock estándar
складская позиция
f
non-standard stock
stock non standard
nicht Standard Lager
stock non standard
stock no estándar
не складская позиция
m
stock exhaustion
esaurimento stock
Vorraterschöpfung
épuisement du stock
agotamiento de stock
складские остатки
APPLICATION GUIDELINES INDICAZIONI PER L'APPLICAZIONE LEITFADEN ZUR ANWENDUNG
INDICATIONS POUR L’APPLICATION INDICACIONES PARA SU APLICACIÓN УКАЗАНИЯ ПО ПРИМЕНЕНИЮ
0
1st choice
1° scelta
1. Wahl
1er choix
1ª elección
1-й выбор
,
suitable
adatto
geeignet
adapté
adecuado
пригоден
SHANK ATTACCO SCHAFT QUEUE MANGO ХВОСТОВИК
cylindrical shank
attacco cilindrico
zylindrischer Schaft
queue cylindrique
mango cilíndrico
цилиндрическое крепление
Weldon
MILLING STRATEGY STRATEGIA DI FRESATURA FRÄSSTRATEGIE
STRATÉGIES DE FRAISAGE ESTRATEGIA DE FRESADO СТРАТЕГИЯ ФРЕЗЕРОВАНИЯ
SLOTTING
slotting
fresatura di cave
Nutfräsen
fraisage de pièce taillée dans la masse
fresado de una sola pieza
фрезерование пазов
SIDE MILLING
side milling
contornatura
Konturfräsen
contournage
perfiladura
фрезерование по контуру
COPYING
copying
copiatura
Kopieren
copiage
copia
копирование
DRILLING
drilling
foratura
Bohren
perçage
perforación
сверление
Caption
Legenda Verzeichnis Légende Leyenda Условные обозначения
647
MILLING STRATEGY STRATEGIA DI FRESATURA FRÄSSTRATEGIE
STRATÉGIES DE FRAISAGE ESTRATEGIA DE FRESADO СТРАТЕГИЯ ФРЕЗЕРОВАНИЯ
ROUNDING
rounding
raggiatura concava
Konkavradius
rayon concave
redondeo cóncavo
кругление
DOVETAIL A
45°-60°
dovetail A
DOVETAIL B
45°-60°
dovetail B
T SLOT
T slot
cave a T
T Nut
rainure en T
ranurado en T
обработка Т-образного паза
WOODRUFF
Woodruff
APPLICATION RANGE GAMMA DI APPLICAZIONE ANWENDUNGSBEREICH
GAMME D'APPLICATION RANGO DE APLICACIÓN ОБЛАСТЬ ПРИМЕНЕНИЯ
general purpose
uso generico
allgemeine Anwendung
applications génériques
uso genérico
общего назначения
HSSP high performance
HSSP alto rendimento
HSSP hochleistung
HSSP haute performance
HSSP alto rendimiento
Высокопроизводительная быстрорежущая сталь
for aluminium
per alluminio
für Aluminium
pour aluminium
para aluminio
для алюминия
TYPE TIPO TYP TYPE TIPO ТИП
sharp corner
spigolo vivo
scharfe Kante
arête vive
arista viva
острая кромка
ball nose
raggiata
runder Stirn
bout hémisphérique
fresa de bola
сферическая
Caption
Legenda Verzeichnis Légende Leyenda Условные обозначения
648
NR. OF FLUTES N. DI TAGLIENTI ANZAHL DER SCHNEIDEN NOMBRE DE DENTS N. DE LABIOS КОЛИЧЕСТВО РЕЖУЩИХ КРОМОК
2 flutes
2 taglienti
2 Schneiden
2 arêtes de coupe
2 filos
2 зуба
3 flutes
3 taglienti
3 Schneiden
3 arêtes de coupe
3 filos
3 зуба
4 flutes
4 taglienti
4 Schneiden
4 arêtes de coupe
4 filos
4 зуба
6 flutes
6 taglienti
6 Schneiden
6 arêtes de coupe
6 filos
6 зубьев
Z>6
>6 flutes
>6 taglienti
>6 Schneiden
>6 arêtes de coupe
>6 filos
>6 зубьев
CHIPBREAKER STYLE TIPO DI ROMPITRUCIOLO SPÄNEBRECHER TYP
TYPE DE BRISE-COPEAUX TIPO DE ROMPEVIRUTAS ТИП СТРУЖКОЛОМА
roughing coarse pitch
sgrossare passo grosso
Schruppfräser Regelgewinde
ébauche pas gros
desbaste paso grueso
черновая с крупным шагом
roughing fine pitch
sgrossare passo fine
Schruppfräser Feingewinde
ébauche pas fin
desbaste paso fino
черновая с мелким шагом
MATERIAL MATERIALE WERKSTOFF MATIÈRE MATERIAL МАТЕРИАЛ
high speed steel 5%÷8% Co
acciaio super rapido 5%÷8% Co
Hochleistungsschnellschnittstahl 5%÷8% Co
acier rapide 5%÷8% Co
acero súper rápido 5%÷8% Co
быстрорежущая сталь с кобальтом 5÷8%
powder steel
acciaio sinterizzato
Sinterstahl
acier fritté
acero sinterizado
порошковая сталь
SURFACE TREATMENT TRATTAMENTO SUPERFICIALE OBERFLÄCHENBEHANDLUNG
TRAITMENT DE SURFACE TRATAMIENTO SUPERFICIAL ОБРАБОТКА ПОВЕРХНОСТИ
...
BR
uncoated
non rivestito
unbeschichtet
non revêtu
no revestido
без покрытия
Caption
Legenda Verzeichnis Légende Leyenda Условные обозначения
649
COATINGS RIVESTIMENTI BESCHICHTUNGEN REVÊTEMENTS RECUBRIMIENTOS ПОКРЫТИЕ
hardness (HV)
durezza (HV)
Härte (HV)
dureté (HV)
dureza (HV)
твёрдость (HV)
3300
friction coefficient
coefficiente d’attrito
Reibungskoeffizient
coefficent de frottement
coeficiente de rozamiento
коэффициент трения
0.3
thickness (μ)
spessore (μ)
dicke (μ)
epaisseur (μ)
espesor (μ)
толщина (мкм)
3
max working temperature (°C)
temperatura max (°C)
hochste Temperatur (°C)
température maximale (°C)
temperatura máx (°C)
макс. температура (°C)
950
Selection Guide
Indice grafico Auswahlhilfe Indice graphique Índice gráfico Руководство по выбору
650
ITEM No. PAGE
HSS/Co - HSSP general purpose, square
WS2 658
TAWS2 658
UMWS2 658
WL2 661
TAWL2 661
WSA2 663
WS3 665
TAWS3 665
WL3 667
TAWL3 667
TAWSH3 669
WS4(6) 671
TAWS4(6) 671
UMWS4 671
WL4(6) 673
TAWL4(6) 673
HSS/Co - HSSP general purpose, roughing
TAWSR 675
WSFR 677
TAWSFR 677
UMWSFR 677
WLFR 679
TAWLFR 679
HSS/Co general purpose, ball nose
WSB2 681
TAWSB2 681
WLB2 683
TAWLB2 683
Selection Guide
Indice grafico Auswahlhilfe Indice graphique Índice gráfico Руководство по выбору
651
RANGE NORM TYPE MATERIAL /
COATING
HELIX
ANGLE
GEOMETRY
Z
ISO P ISO M ISO K ISO N ISO S ISO H
1-30 DIN 327 N HSS/Co
BR 30° SQUARE 2 +,+,
1-25 DIN 327 N HSS/Co
PV200 30° SQUARE 2 +,+,
2-20 DIN 327 UM HSSP
PV200 30° SQUARE 2 +++
3-30 DIN 844 N HSS/Co
BR 30° SQUARE 2 +,+,
3-20 DIN 844 N HSS/Co
PV200 30° SQUARE 2 +,+,
2-20 DIN 844 ALU HSS/Co
BR 42° SQUARE 2 +
1-32 DIN 844 N HSS/Co
BR 30° SQUARE 3 +,+,
1-25 DIN 844 N HSS/Co
PV200 30° SQUARE 3 +,+,
3-25 DIN 844 N HSS/Co
BR 30° SQUARE 3 +,+,
3-20 DIN 844 N HSS/Co
PV200 30° SQUARE 3 +,+,
6-20 DIN 844 N HSS/Co
PV200 45° SQUARE 3 +,+,
2-30 DIN 844 N HSS/Co
BR 30° SQUARE 4-6 +,+,
2-40 DIN 844 N HSS/Co
PV200 30° SQUARE 4-6 +,+,
3-20 DIN 844 UM HSSP
PV200 30° SQUARE 4 +++
3-25 DIN 844 N HSS/Co
BR 30° SQUARE 4-6 +,+,
3-40 DIN 844 N HSS/Co
PV200 30° SQUARE 4-6 +,+,
6-20 DIN 844 N - NR HSS/Co
PV200 30° SQUARE 3-4 +,+,
6-20 DIN 844 N - HR HSS/Co
BR 30° SQUARE 3-4 +,+,
6-40 DIN 844 N - HR HSS/Co
PV200 30° SQUARE 3-6 +,+,
6-20 DIN 844 UM - HR HSSP
PV200 30° SQUARE 3-4 +++
6-20 DIN 844 N - HR HSS/Co
BR 30° SQUARE 3-4 +,+,
6-40 DIN 844 N - HR HSS/Co
PV200 30° SQUARE 3-6 +,+,
2-30 DIN 327 N HSS/Co
BR 30° BALL
NOSE 2+,+,
2-20 DIN 327 N HSS/Co
PV200 30° BALL
NOSE 2+,+,
3-20 DIN 1889 N HSS/Co
BR 30° BALL
NOSE 2+,+,
3-20 DIN 1889 N HSS/Co
PV200 30° BALL
NOSE 2+,+,
+ 1st choice , suitable
Selection Guide
Indice grafico Auswahlhilfe Indice graphique Índice gráfico Руководство по выбору
652
ITEM No. PAGE
HSS/Co general purpose, shell
FM 685
TAFM 685
FFR 687
HSS/Co general purpose, shell TAFFR 687
HSS/Co general purpose, corner rounding WCR 689
HSS/Co general purpose, dovetail
WDC 691
WDD 693
HSS/Co general purpose, T-slot WTM 695
HSS/Co general purpose, woodru WWK 697
Selection Guide
Indice grafico Auswahlhilfe Indice graphique Índice gráfico Руководство по выбору
653
RANGE NORM TYPE MATERIAL /
COATING
HELIX
ANGLE
GEOMETRY
Z
ISO P ISO M ISO K ISO N ISO S ISO H
40-100 DIN 1880 N HSS/Co
BR 30° SQUARE 8-10 +,+,
40-100 DIN 1880 N HSS/Co
PV200 30° SQUARE 8-10 +,+,
40-100 DIN 1880 N - HR HSS/Co
BR 30° SQUARE 6-10 +,+,
40-100 DIN 1880 N - HR HSS/Co
PV200 30° SQUARE 6-10 +,+,
R1-R11 DIN 6518 N HSS/Co
BR 0° RADIUS 4 +,+,
16-38 DIN 1833 N HSS/Co
BR 45°-60° SQUARE 6-12 +,+,
16-38 DIN 1833 N HSS/Co
BR 45°-60° SQUARE 6-12 +,+,
12.5-36 DIN 851 N HSS/Co
BR 15° SQUARE 6-8 +,+,
10.5-32.5 DIN850 N HSS/Co
BR 10° SQUARE 8-12 +,+,
+ 1st choice , suitable
System charts
Grafici applicativi Anwendungsgrafiken Graphiques d’application Gráficos aplicativos Диаграммы
654
ISO P
ISO M
Vc [m/min]
20 40 60 80
500
700
900
1100
Rm [N/mm2]
HSSP+
Vc [m/min]
10 20 30 40
high
medium
high
medium
low
low
Machinability
HSS/Co,
medium
HSSP+
HSS/Co+
STEEL APPLICATION
STAINLESS STEEL APPLICATION
HSS/Co : general purpose (page 658)
HSSP : high performance (page 658)
+ 1st choice , suitable
+ 1st choice , suitable
System charts
Grafici applicativi Anwendungsgrafiken Graphiques d’application Gráficos aplicativos Диаграммы
655
ISO K
ISO N
Vc [m/min]
30 40 50 60
100
200
300
400
HB hardness
HSS/Co+
Vc [m/min]
60 80 100 120
8
10
Si %
HSS/Co+
12
14
16
HSSP+
CAST IRON APPLICATION
NON-FERROUS MATERIALS APPLICATION
HSS/Co : general purpose (page 658)
HSSP : high performance (page 658)
+ 1st choice , suitable
+ 1st choice , suitable
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
UH
HSS/CO-HSSP
END MILLS
HSS/CO - HSSP
GENERAL PURPOSE
The Osawa catalogue includes a wide range of HSS/Co -
HSSP end mills, both coated and uncoated.
Il catalogo Osawa include un’ampia scelta di frese in
HSS/Co - HSSP nudo e rivestito.
Der Osawa Katalog umfasst eine große Auswahl an
beschichteten und unbeschichteten Fräsern aus HSS/Co - HSSP.
Le catalogue Osawa inclut une large gamme de fraises en
HSS/Co - HSSP, soit revêtues, soit non revêtues.
El catálogo Osawa incluye una amplia variedad de fresas de
HSS/Co - HSSP con o sin recubrimiento.
В каталоге Osawa также представлена широкая
гамма концевых фрез изготовленных из HSS/Co - HSSP с
покрытием и без покрытия.
HSS/Co - HSSP end mills
658
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
UH
HSS/CO-HSSP
END MILLS
h stock standard f non-standard stock m stock exhaustion
D(e8) D Tol. d(h6) l l1 L z EDP No. Stock EDP No. Stock EDP No. Stock
1-0.014/-0.028 6 2.5 47 2 WS2010 hTAWS2010 h
1.5 -0.014/-0.028 6 3 47 2 WS2015 hTAWS2015 h
2-0.014/-0.028 6 4 48 2 WS2020 hTAWS2020 hUMWS2020 h
2.5 -0.014/-0.028 6 5 49 2 WS2025 hTAWS2025 h
3-0.014/-0.028 6 5 49 2 WS2030 hTAWS2030 hUMWS2030 h
3.5 -0.020/-0.038 6 6 50 2 WS2035 hTAWS2035 h
4-0.020/-0.038 6 7 51 2 WS2040 hTAWS2040 hUMWS2040 h
4.5 -0.020/-0.038 6 7 51 2 WS2045 hTAWS2045 h
5 -0.020/-0.038 6 8 52 2 WS2050 hTAWS2050 hUMWS2050 h
5.5 -0.020/-0.038 6 8 52 2 WS2055 hTAWS2055 h
6-0.020/-0.038 6 8 52 2 WS2060 hTAWS2060 hUMWS2060 h
6.5 -0.025/-0.047 10 10 60 2 WS2065 hTAWS2065 h
7-0.025/-0.047 10 10 60 2 WS2070 hTAWS2070 h
7.5 -0.025/-0.047 10 10 60 2 WS2075 hTAWS2075 h
8-0.025/-0.047 10 11 61 2 WS2080 hTAWS2080 hUMWS2080 h
8.5 -0.025/-0.047 10 11 61 2 WS2085 hTAWS2085 h
9-0.025/-0.047 10 11 61 2 WS2090 hTAWS2090 h
9.5 -0.025/-0.047 10 11 61 2 WS2095 hTAWS2095 h
10 -0.025/-0.047 10 13 63 2 WS2100 hTAWS2100 hUMWS2100 h
10.5 -0.032/-0.059 12 13 70 2 WS2105 hTAWS2105 h
11 -0.032/-0.059 12 13 70 2 WS2110 hTAWS2110 h
11.5 -0.032/-0.059 12 13 70 2 WS2115 hTAWS2115 h
12 -0.032/-0.059 12 16 73 2 WS2120 hTAWS2120 hUMWS2120 h
12.5 -0.032/-0.059 12 16 73 2 WS2125 hTAWS2125 h
13 -0.032/-0.059 12 16 73 2 WS2130 hTAWS2130 h
13.5 -0.032/-0.059 12 16 73 2 WS2135 hTAWS2135 h
14 -0.032/-0.059 12 16 73 2 WS2140 hTAWS2140 hUMWS2140 h
15 -0.032/-0.059 12 16 73 2 WS2150 hTAWS2150 h
16 -0.032/-0.059 16 19 79 2 WS2160 hTAWS2160 hUMWS2160 h
17 -0.032/-0.059 16 19 79 2 WS2170 hTAWS2170 h
18 -0.032/-0.059 16 19 79 2 WS2180 hTAWS2180 hUMWS2180 h
19 -0.040/-0.073 16 19 79 2 WS2190 hTAWS2190 h
20 -0.040/-0.073 20 22 88 2 WS2200 hTAWS2200 hUMWS2200 h
22 -0.040/-0.073 20 22 88 2 WS2220 hTAWS2220 h
24 -0.040/-0.073 25 26 102 2 WS2240 h
25 -0.040/-0.073 25 26 102 2 WS2250 hTAWS2250 h
26 -0.040/-0.073 25 26 102 2 WS2260 h
28 -0.040/-0.073 25 26 102 2 WS2280 h
30 -0.040/-0.073 25 26 102 2 WS2300 h
WS2-TAWS2-UMWS2
weldon shank, 2 flutes
DIN
327
WS2/ TAWS2
WS2 TAWS2
WS2 TAWS2
UMWS2
UMWS2
PMKNSH
+,+, WS2-TAWS2
+++ UMWS2
+ 1st choice , suitable
SLOTTING
SIDE MILLING
DRILLING
WS2 TAWS2 UMWS2
HSS/Co - HSSP end mills
659
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
UH
HSS/CO-HSSP
END MILLS
CUTTING PARAMETERS
TAWS2
UMWS2 (n and Vf = +20%) - WS2 (n and Vf = -20% ÷ -30%)
SLOTTING
Material Group
ISO 513 P1 P2 P3 M1 K1 P4 M2 K2 P5 M3
Hardness/Rm ≤ 700 N/mm² 600-800 N/mm² 800-1000 N/mm² 900-1200 N/mm²
ap x ae 0.5D x D 0.5D x D 0.5D x D 0.5D x D
Vc (m/min) 40-60 30-50 25-35 15-25
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
115920 0.003 90 12740 0.003 60 9550 0.002 40 6370 0.002 20
27960 0.006 95 6370 0.005 70 4780 0.005 45 3180 0.004 25
35310 0.009 95 4250 0.008 70 3180 0.007 45 2120 0.006 25
43980 0.013 105 3180 0.012 75 2390 0.010 45 1590 0.009 30
53180 0.017 110 2550 0.015 80 1910 0.013 50 1270 0.012 30
62650 0.022 115 2120 0.020 85 1590 0.017 50 1060 0.015 35
81990 0.032 125 1590 0.029 90 1190 0.024 55 800 0.022 35
10 1590 0.040 125 1270 0.036 90 960 0.030 60 640 0.028 35
12 1330 0.048 130 1060 0.043 90 800 0.036 60 530 0.034 35
14 1140 0.057 130 910 0.051 95 680 0.043 60 450 0.040 35
16 1000 0.067 135 800 0.060 95 600 0.050 60 400 0.047 40
18 880 0.077 135 710 0.069 100 530 0.058 60 350 0.054 40
20 800 0.088 140 640 0.079 100 480 0.066 65 320 0.062 40
22 720 0.098 140 580 0.088 100 430 0.074 65 290 0.069 40
24 660 0.105 140 530 0.095 100 400 0.079 65 270 0.074 40
25 640 0.110 140 510 0.099 100 380 0.083 65 250 0.077 40
26 610 0.116 140 490 0.104 100 370 0.087 65 240 0.081 40
28 570 0.122 140 450 0.110 100 340 0.092 60 230 0.085 40
30 530 0.128 135 420 0.115 95 320 0.096 60 210 0.090 40
ap x ae ≤ D3 0.25D x D
SIDE MILLING
Material Group
ISO 513 P1 P2 P3 M1 K1 P4 M2 K2 P5 M3
Hardness/Rm ≤ 700 N/mm² 600-800 N/mm² 800-1000 N/mm² 900-1200 N/mm²
ap x ae 1.5D x 0.5D 1.5D x 0.5D 1.5D x 0.3D 1.5D x 0.3D
Vc (m/min) 50-70 40-60 25-35 20-30
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
119110 0.003 130 15920 0.003 100 11150 0.003 60 7960 0.004 60
29550 0.007 140 7960 0.006 100 5570 0.006 60 3980 0.008 60
36370 0.007 90 5310 0.006 70 3720 0.006 45 2650 0.005 25
44780 0.011 105 3980 0.010 75 2790 0.009 50 1990 0.008 30
53820 0.016 120 3180 0.014 90 2230 0.012 55 1590 0.011 35
63180 0.020 130 2650 0.018 95 1860 0.016 60 1330 0.014 40
82390 0.026 125 1990 0.024 95 1390 0.021 60 1000 0.018 35
10 1910 0.038 145 1590 0.035 110 1110 0.031 70 800 0.027 45
12 1590 0.048 155 1330 0.043 115 930 0.038 70 660 0.034 45
14 1360 0.058 155 1140 0.052 120 800 0.046 75 570 0.040 45
16 1190 0.068 165 1000 0.062 125 700 0.055 75 500 0.048 50
18 1060 0.080 170 880 0.072 125 620 0.064 80 440 0.056 50
20 960 0.092 175 800 0.083 135 560 0.074 85 400 0.065 50
22 870 0.106 185 720 0.095 135 510 0.084 85 360 0.074 55
24 800 0.118 190 660 0.106 140 460 0.094 85 330 0.082 55
25 760 0.126 190 640 0.113 145 450 0.101 90 320 0.088 55
26 730 0.132 195 610 0.119 145 430 0.106 90 310 0.092 55
28 680 0.139 190 570 0.125 145 400 0.111 90 280 0.097 55
30 640 0.146 185 530 0.132 140 370 0.117 85 270 0.102 55
ap x ae ≤ D3 1.5D x 0.25D 1.5D x 0.25D 1.2D x 0.1D 1.2D x 0.1D
HSS/Co - HSSP end mills
660
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
UH
HSS/CO-HSSP
END MILLS
CUTTING PARAMETERS
TAWS2
UMWS2 (n and Vf = +20%) - WS2 (n and Vf = -20% ÷ -30%)
DRILLING
Material Group
ISO 513 P1 P2 P3 M1 K1 P4 M2 K2 P5 M3
Hardness/Rm ≤ 700 N/mm² 600-800 N/mm² 800-1000 N/mm² 900-1200 N/mm²
ap x ae 0.5D x D 0.5D x D 0.5D x D 0.5D x D
Vc (m/min) 30-50 25-35 20-30 12-18
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
34250 0.005 40 3180 0.003 15 2650 0.002 10 1590 0.002 5
43180 0.007 40 2390 0.004 20 1990 0.003 15 1190 0.003 5
52550 0.009 45 1910 0.006 20 1590 0.005 15 960 0.005 10
62120 0.011 45 1590 0.008 25 1330 0.006 15 800 0.006 10
81590 0.016 50 1190 0.010 25 1000 0.008 15 600 0.008 10
10 1270 0.020 50 960 0.014 30 800 0.012 20 480 0.011 10
12 1060 0.024 50 800 0.018 30 660 0.015 20 400 0.014 10
14 910 0.029 50 680 0.022 30 570 0.018 20 340 0.017 10
16 800 0.034 55 600 0.026 30 500 0.021 20 300 0.020 10
18 710 0.039 55 530 0.030 30 440 0.025 20 270 0.023 15
20 640 0.044 55 480 0.035 35 400 0.029 25 240 0.027 15
22 580 0.049 55 430 0.040 35 360 0.033 25 220 0.031 15
24 530 0.053 55 400 0.044 35 330 0.037 25 200 0.034 15
25 510 0.055 55 380 0.047 35 320 0.039 25 190 0.037 15
26 490 0.058 55 370 0.050 35 310 0.041 25 180 0.039 15
28 450 0.061 55 340 0.052 35 280 0.044 25 170 0.041 15
30 420 0.064 55 320 0.055 35 270 0.046 25 160 0.043 15
HSS/Co end mills
661
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
UH
HSS/CO-HSSP
END MILLS
h stock standard f non-standard stock m stock exhaustion
D(e8) D Tol. d(h6) l l1 L z EDP No. Stock EDP No. Stock
3-0.014/-0.028 6 8 56 2 WL2030 hTAWL2030 h
4-0.020/-0.038 6 11 63 2 WL2040 hTAWL2040 h
5 -0.020/-0.038 6 13 68 2 WL2050 hTAWL2050 h
6-0.020/-0.038 6 13 68 2 WL2060 hTAWL2060 h
7-0.025/-0.047 10 16 80 2 WL2070 h
8-0.025/-0.047 10 19 88 2 WL2080 hTAWL2080 h
9-0.025/-0.047 10 19 88 2 WL2090 h
10 -0.025/-0.047 10 22 95 2 WL2100 hTAWL2100 h
11 -0.032/-0.059 12 22 102 2 WL2110 h
12 -0.032/-0.059 12 26 110 2 WL2120 hTAWL2120 h
13 -0.032/-0.059 12 26 110 2 WL2130 h
14 -0.032/-0.059 12 26 110 2 WL2140 hTAWL2140 h
15 -0.032/-0.059 12 26 110 2 WL2150 h
16 -0.032/-0.059 16 32 123 2 WL2160 hTAWL2160 h
18 -0.032/-0.059 16 32 123 2 WL2180 hTAWL2180 h
20 -0.040/-0.073 20 38 141 2 WL2200 hTAWL2200 h
22 -0.040/-0.073 20 38 141 2 WL2220 h
24 -0.040/-0.073 25 45 166 2 WL2240 f
25 -0.040/-0.073 25 45 166 2 WL2250 h
28 -0.040/-0.073 25 45 166 2 WL2280 h
30 -0.040/-0.073 25 45 166 2 WL2300 h
WL2 TAWL2
WL2-TAWL2
weldon shank, 2 flutes, long
DIN
844
WL2 TAWL2
WL2
TAWL2
PMKNSH
+,+,
+ 1st choice , suitable
SLOTTING
SIDE MILLING
HSS/Co end mills
662
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
UH
HSS/CO-HSSP
END MILLS
CUTTING PARAMETERS
TAWL2
WL2 (n and Vf = -20% ÷ -30%)
SLOTTING
Material Group
ISO 513 P1 P2 P3 M1 K1 P4 M2 K2 P5 M3
Hardness/Rm ≤ 700 N/mm² 600-800 N/mm² 800-1000 N/mm² 900-1200 N/mm²
ap x ae 0.3D x D 0.3D x D 0.3D x D 0.2D x D
Vc (m/min) 30-50 25-35 20-30 12-18
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
34250 0.006 50 3180 0.005 30 2650 0.005 25 1590 0.004 15
43180 0.008 50 2390 0.007 35 1990 0.007 25 1190 0.006 15
52550 0.011 55 1910 0.010 35 1590 0.009 25 960 0.008 15
62120 0.014 60 1590 0.012 40 1330 0.011 30 800 0.010 15
81590 0.020 65 1190 0.018 45 1000 0.016 30 600 0.015 20
10 1270 0.025 65 960 0.023 45 800 0.020 30 480 0.019 20
12 1060 0.030 65 800 0.027 45 660 0.024 30 400 0.023 20
14 910 0.036 65 680 0.032 45 570 0.029 35 340 0.027 20
16 800 0.042 70 600 0.038 45 500 0.034 35 300 0.032 20
18 710 0.048 70 530 0.043 45 440 0.038 35 270 0.036 20
20 640 0.053 70 480 0.048 45 400 0.043 35 240 0.040 20
22 580 0.060 70 430 0.054 45 360 0.048 35 220 0.045 20
25 510 0.070 70 380 0.063 50 320 0.056 35 190 0.053 20
28 450 0.077 70 340 0.069 45 280 0.062 35 170 0.058 20
30 420 0.084 70 320 0.076 50 270 0.067 35 160 0.063 20
ap x ae ≤ D5 0.25D x D
SIDE MILLING
Material Group
ISO 513 P1 P2 P3 M1 K1 P4 M2 K2 P5 M3
Hardness/Rm ≤ 700 N/mm² 600-800 N/mm² 800-1000 N/mm² 900-1200 N/mm²
ap x ae 2D x 0.1D 2D x 0.1D 2D x 0.1D 2D x 0.1D
Vc (m/min) 40-50 30-40 25-35 10-20
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
34780 0.006 60 3720 0.006 40 3180 0.005 30 1590 0.005 10
43580 0.009 65 2790 0.008 50 2390 0.007 30 1190 0.007 20
52870 0.012 70 2230 0.011 50 1910 0.009 40 960 0.009 20
62390 0.015 75 1860 0.014 50 1590 0.012 40 800 0.011 20
81790 0.022 80 1390 0.020 60 1190 0.018 40 600 0.017 20
10 1430 0.028 80 1110 0.025 60 960 0.022 40 480 0.021 20
12 1190 0.033 80 930 0.030 60 800 0.027 40 400 0.025 20
14 1020 0.040 80 800 0.036 60 680 0.032 40 340 0.030 20
16 900 0.046 85 700 0.042 60 600 0.037 40 300 0.035 20
18 800 0.052 85 620 0.047 60 530 0.042 40 270 0.039 20
20 720 0.059 85 560 0.053 60 480 0.047 40 240 0.044 20
22 650 0.065 85 510 0.059 60 430 0.052 50 220 0.049 20
25 570 0.077 90 450 0.069 60 380 0.062 50 190 0.058 20
28 510 0.085 85 400 0.076 60 340 0.068 50 170 0.064 20
30 480 0.092 90 370 0.083 60 320 0.074 50 160 0.069 20
ap x ae ≤ D5 1.5D x 0.05D
HSS/Co end mills
663
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
UH
HSS/CO-HSSP
END MILLS
h stock standard f non-standard stock m stock exhaustion
D(e8) D Tol. d(h6) l l1 L z EDP No. Stock
2 -0.014/-0.028 6 7 51 2 WSA2020 h
2.5 -0.014/-0.028 6 8 52 2 WSA2025 h
3-0.014/-0.028 6 8 52 2 WSA2030 h
4-0.020/-0.038 6 11 55 2 WSA2040 h
5-0.020/-0.038 6 13 57 2 WSA2050 h
6-0.020/-0.038 6 13 57 2 WSA2060 h
8-0.025/-0.047 10 19 69 2 WSA2080 h
10 -0.025/-0.047 10 22 72 2 WSA2100 h
12 -0.032/-0.059 12 26 83 2 WSA2120 h
14 -0.032/-0.059 12 26 83 2 WSA2140 h
16 -0.032/-0.059 16 32 92 2 WSA2160 h
18 -0.032/-0.059 16 32 92 2 WSA2180 h
20 -0.040/-0.073 20 38 104 2 WSA2200 h
WSA2
weldon shank, 2 flutes for aluminium
DIN
844
PMKNSH
+
+ 1st choice , suitable
SLOTTING
SIDE MILLING
DRILLING
HSS/Co end mills
664
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
UH
HSS/CO-HSSP
END MILLS
CUTTING PARAMETERS
WSA2
SLOTTING
Material Group
ISO 513 N1 N2 N3 N4 N5
Material ≤ 12% Si > 12% Si Non ferrous materials Plastics
ap x ae 0.5D x D 0.5D x D 0.5D x D 0.5D x D
Vc (m/min) 90-110 70-90 60-80 100-140
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
215920 0.015 480 12740 0.014 345 11150 0.012 270 19110 0.018 690
310620 0.020 425 8490 0.018 305 7430 0.016 240 12740 0.024 610
47960 0.030 480 6370 0.027 345 5570 0.024 265 9550 0.036 690
56370 0.035 445 5100 0.032 320 4460 0.028 250 7640 0.042 640
65310 0.042 445 4250 0.038 320 3720 0.034 250 6370 0.050 640
83980 0.056 445 3180 0.050 320 2790 0.045 250 4780 0.067 640
10 3180 0.073 465 2550 0.066 335 2230 0.058 260 3820 0.088 670
12 2650 0.090 475 2120 0.081 345 1860 0.072 270 3180 0.108 685
14 2270 0.106 480 1820 0.095 345 1590 0.085 270 2730 0.127 695
16 1990 0.120 480 1590 0.108 345 1390 0.096 265 2390 0.144 690
18 1770 0.135 480 1420 0.122 345 1240 0.108 270 2120 0.162 685
20 1590 0.150 475 1270 0.135 345 1110 0.120 265 1910 0.180 690
ap x ae ≤ D3 0.2D x D
SIDE MILLING
Material Group
ISO 513 N1 N2 N3 N4 N5
Material ≤ 12% Si > 12% Si Non ferrous materials Plastics
ap x ae 1.5D x 0.5D 1.5D x 0.5D 1.5D x 0.5D 1.5D x 0.5D
Vc (m/min) 100-140 90-110 70-90 130-150
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
219110 0.018 690 15920 0.016 520 12740 0.014 370 22290 0.020 880
312740 0.018 460 10620 0.016 345 8490 0.014 245 14860 0.013 375
49550 0.024 460 7960 0.022 345 6370 0.019 245 11150 0.017 375
57640 0.036 550 6370 0.032 415 5100 0.029 295 8920 0.025 450
66370 0.042 535 5310 0.038 400 4250 0.034 285 7430 0.029 435
84780 0.050 480 3980 0.045 360 3180 0.040 255 5570 0.035 395
10 3820 0.067 515 3180 0.060 385 2550 0.054 275 4460 0.047 420
12 3180 0.088 555 2650 0.079 420 2120 0.070 295 3720 0.061 455
14 2730 0.108 590 2270 0.097 440 1820 0.086 315 3180 0.076 480
16 2390 0.127 610 1990 0.114 455 1590 0.102 325 2790 0.089 495
18 2120 0.144 610 1770 0.130 460 1420 0.115 325 2480 0.101 500
20 1910 0.162 620 1590 0.146 465 1270 0.130 330 2230 0.113 505
ap x ae ≤ D3 1.2D x 0.1D
DRILLING
Material Group
ISO 513 N1 N2 N3 N4 N5
Material ≤ 12% Si > 12% Si Non ferrous materials Plastics
ap x ae 0.5D x D 0.5D x D 0.5D x D 0.5D x D
Vc (m/min) 70-90 55-75 50-60 90-110
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
38490 0.010 170 6900 0.007 95 5840 0.006 70 10620 0.009 192
46370 0.015 190 5180 0.009 95 4380 0.008 70 7960 0.012 192
55100 0.018 180 4140 0.014 110 3500 0.012 85 6370 0.018 230
64250 0.021 180 3450 0.016 110 2920 0.014 80 5310 0.021 224
83180 0.028 180 2590 0.019 100 2190 0.017 75 3980 0.025 200
10 2550 0.037 185 2070 0.025 105 1750 0.022 80 3180 0.034 214
12 2120 0.045 190 1730 0.033 115 1460 0.029 85 2650 0.044 232
14 1820 0.053 195 1480 0.041 120 1250 0.036 90 2270 0.054 246
16 1590 0.060 190 1290 0.048 125 1090 0.042 90 1990 0.064 254
18 1420 0.068 190 1150 0.054 125 970 0.048 95 1770 0.072 254
20 1270 0.075 190 1040 0.061 125 880 0.054 95 1590 0.081 258
HSS/Co end mills
665
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
UH
HSS/CO-HSSP
END MILLS
h stock standard f non-standard stock m stock exhaustion
D(e8) D Tol. d(h6) l l1 L z EDP No. Stock EDP No. Stock
1-0.014/-0.028 6 3 47 3 WS3010 hTAWS3010 f
1.5 -0.014/-0.028 6 7 51 3 WS3015 hTAWS3015 f
2-0.014/-0.028 6 7 51 3 WS3020 hTAWS3020 h
2.5 -0.014/-0.028 6 8 52 3 WS3025 hTAWS3025 h
3-0.014/-0.028 6 8 52 3 WS3030 hTAWS3030 h
3.5 -0.020/-0.038 6 10 54 3 WS3035 hTAWS3035 h
4-0.020/-0.038 6 11 55 3 WS3040 hTAWS3040 h
4.5 -0.020/-0.038 6 11 55 3 WS3045 hTAWS3045 h
5 -0.020/-0.038 6 13 57 3 WS3050 hTAWS3050 h
5.5 -0.020/-0.038 6 13 57 3 WS3055 hTAWS3055 h
6-0.020/-0.038 6 13 57 3 WS3060 hTAWS3060 h
6.5 -0.025/-0.047 10 16 66 3 WS3065 hTAWS3065 h
7-0.025/-0.047 10 16 66 3 WS3070 hTAWS3070 h
8-0.025/-0.047 10 19 69 3 WS3080 hTAWS3080 h
8.5 -0.025/-0.047 10 19 69 3 WS3085 hTAWS3085 h
9-0.025/-0.047 10 19 69 3 WS3090 hTAWS3090 h
10 -0.025/-0.047 10 22 72 3 WS3100 hTAWS3100 h
11 -0.032/-0.059 12 22 79 3 WS3110 hTAWS3110 h
12 -0.032/-0.059 12 26 83 3 WS3120 hTAWS3120 h
13 -0.032/-0.059 12 26 83 3 WS3130 hTAWS3130 h
14 -0.032/-0.059 12 26 83 3 WS3140 hTAWS3140 h
15 -0.032/-0.059 12 26 83 3 WS3150 hTAWS3150 h
16 -0.032/-0.059 16 32 92 3 WS3160 hTAWS3160 h
18 -0.032/-0.059 16 32 92 3 WS3180 hTAWS3180 h
20 -0.040/-0.073 20 38 104 3 WS3200 hTAWS3200 h
22 -0.040/-0.073 20 38 104 3 WS3220 hTAWS3220 h
25 -0.040/-0.073 25 45 121 3 WS3250 hTAWS3250 h
30 -0.040/-0.073 25 45 121 3 WS3300 h
32 -0.050/-0.089 32 53 133 3 WS3320 h
WS3 TAWS3
WS3-TAWS3
weldon shank, 3 flutes
DIN
844
WS3 TAWS3
WS3
TAWS3
PMKNSH
+,+,
+ 1st choice , suitable
SLOTTING
SIDE MILLING
HSS/Co end mills
666
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
UH
HSS/CO-HSSP
END MILLS
CUTTING PARAMETERS
TAWS3
WS3 (n and Vf = -20% ÷ -30%)
SLOTTING
Material Group
ISO 513 P1 P2 P3 M1 K1 P4 M2 K2 P5 M3
Hardness/Rm ≤ 700 N/mm² 600-800 N/mm² 800-1000 N/mm² 900-1200 N/mm²
ap x ae 0.3D x D 0.3D x D 0.3D x D 0.3D x D
Vc (m/min) 40-60 30-50 25-35 15-25
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
115920 0.003 120 12740 0.002 90 9550 0.002 50 6370 0.002 30
27960 0.005 130 6370 0.005 95 4780 0.004 60 3180 0.004 35
35310 0.008 130 4250 0.007 95 3180 0.006 60 2120 0.006 35
43980 0.012 140 3180 0.011 100 2390 0.009 65 1590 0.008 40
53180 0.015 145 2550 0.014 105 1910 0.011 65 1270 0.011 40
62650 0.020 155 2120 0.018 115 1590 0.015 70 1060 0.014 45
81990 0.029 170 1590 0.026 125 1190 0.022 75 800 0.020 50
10 1590 0.036 170 1270 0.032 125 960 0.027 80 640 0.025 50
12 1330 0.043 170 1060 0.039 125 800 0.032 80 530 0.030 50
14 1140 0.051 175 910 0.046 125 680 0.038 80 450 0.036 50
16 1000 0.060 180 800 0.054 130 600 0.045 80 400 0.042 50
18 880 0.069 185 710 0.062 135 530 0.052 85 350 0.049 50
20 800 0.079 190 640 0.071 135 480 0.059 85 320 0.055 55
22 720 0.088 190 580 0.079 140 430 0.066 85 290 0.062 55
25 640 0.099 190 510 0.089 135 380 0.074 85 250 0.069 50
28 570 0.122 210 450 0.110 150 340 0.092 95 230 0.085 60
30 530 0.128 205 420 0.115 145 320 0.096 90 210 0.090 55
32 500 0.136 200 400 0.116 140 300 0.095 90 200 0.095 60
ap x ae ≤ D3 0.2D x D
SIDE MILLING
Material Group
ISO 513 P1 P2 P3 M1 K1 P4 M2 K2 P5 M3
Hardness/Rm ≤ 700 N/mm² 600-800 N/mm² 800-1000 N/mm² 900-1200 N/mm²
ap x ae 1.5D x 0.5D 1.5D x 0.5D 1.5D x 0.3D 1.5D x 0.3D
Vc (m/min) 50-70 40-60 25-35 20-30
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
119110 0.003 170 15920 0.003 130 11150 0.002 80 7960 0.003 80
29550 0.006 190 7960 0.006 140 5570 0.005 90 3980 0.007 90
36370 0.006 125 5310 0.006 95 3720 0.005 60 2650 0.005 35
44780 0.010 140 3980 0.009 105 2790 0.008 65 1990 0.007 40
53820 0.014 160 3180 0.013 120 2230 0.011 75 1590 0.010 45
63180 0.018 175 2650 0.017 130 1860 0.015 80 1330 0.013 50
82390 0.024 170 1990 0.021 130 1390 0.019 80 1000 0.017 50
10 1910 0.035 200 1590 0.031 150 1110 0.028 90 800 0.024 60
12 1590 0.043 205 1330 0.039 155 930 0.035 95 660 0.030 60
14 1360 0.052 210 1140 0.047 160 800 0.041 100 570 0.036 60
16 1190 0.062 220 1000 0.055 165 700 0.049 105 500 0.043 65
18 1060 0.072 230 880 0.065 170 620 0.058 110 440 0.051 65
20 960 0.083 240 800 0.075 180 560 0.067 110 400 0.058 70
22 870 0.095 250 720 0.086 185 510 0.076 115 360 0.067 70
25 760 0.113 260 640 0.102 195 450 0.091 120 320 0.079 75
28 680 0.139 285 570 0.125 215 400 0.111 135 280 0.097 80
32 600 0.146 265 500 0.132 200 350 0.117 125 250 0.102 75
ap x ae ≤ D3 1.5D x 0.25D 1.5D x 0.25D 1.2D x 0.1D 1.2D x 0.1D
HSS/Co end mills
667
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
UH
HSS/CO-HSSP
END MILLS
h stock standard f non-standard stock m stock exhaustion
D(e8) D(e8) Tol. d(h6) l l1 L z EDP No. Stock EDP No. Stock
3-0.014/-0.028 6 12 56 3 WL3030 hTAWL3030 h
4-0.020/-0.038 6 19 63 3 WL3040 hTAWL3040 h
5-0.020/-0.038 6 24 68 3 WL3050 hTAWL3050 h
6-0.020/-0.038 6 24 68 3 WL3060 hTAWL3060 h
8-0.025/-0.047 10 38 88 3 WL3080 hTAWL3080 h
10 -0.025/-0.047 10 45 95 3 WL3100 hTAWL3100 h
12 -0.032/-0.059 12 53 110 3 WL3120 hTAWL3120 h
14 -0.032/-0.059 12 53 110 3 WL3140 hTAWL3140 h
16 -0.032/-0.059 16 63 123 3 WL3160 hTAWL3160 h
18 -0.032/-0.059 16 63 123 3 WL3180 hTAWL3180 h
20 -0.040/-0.073 20 75 141 3 WL3200 hTAWL3200 h
22 -0.040/-0.073 20 75 141 3 WL3220 h
25 -0.040/-0.073 25 90 166 3 WL3250 h
WL3 TAWL3
WL3-TAWL3
weldon shank, 3 flutes, long
DIN
844
WL3 TAWL3
WL3
TAWL3
PMKNSH
+,+,
+ 1st choice , suitable
SLOTTING
SIDE MILLING
HSS/Co end mills
668
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
UH
HSS/CO-HSSP
END MILLS
CUTTING PARAMETERS
TAWL3
WL3 (n and Vf = -20% ÷ -30%)
SLOTTING
Material Group
ISO 513 P1 P2 P3 M1 K1 P4 M2 K2 P5 M3
Hardness/Rm ≤ 700 N/mm² 600-800 N/mm² 800-1000 N/mm² 900-1200 N/mm²
ap x ae 0.3D x D 0.3D x D 0.3D x D 0.2D x D
Vc (m/min) 30-50 25-35 20-30 12-18
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
34250 0.006 70 3180 0.005 50 2650 0.005 35 1590 0.004 20
43180 0.008 80 2390 0.007 55 1990 0.007 40 1190 0.006 20
52550 0.011 80 1910 0.010 55 1590 0.009 40 960 0.008 25
62120 0.014 90 1590 0.012 60 1330 0.011 45 800 0.010 25
81590 0.020 95 1190 0.018 65 1000 0.016 50 600 0.015 25
10 1270 0.025 95 960 0.023 65 800 0.020 50 480 0.019 25
12 1060 0.030 95 800 0.027 65 660 0.024 50 400 0.023 25
14 910 0.036 100 680 0.032 65 570 0.029 50 340 0.027 25
16 800 0.042 100 600 0.038 70 500 0.034 50 300 0.032 30
18 710 0.048 100 530 0.043 70 440 0.038 50 270 0.036 30
20 640 0.053 100 480 0.048 70 400 0.043 50 240 0.040 30
22 580 0.060 105 430 0.054 70 360 0.048 50 220 0.045 30
25 510 0.070 105 380 0.063 70 320 0.056 55 190 0.053 30
ap x ae ≤ D5 0.25D x D
SIDE MILLING
Material Group
ISO 513 P1 P2 P3 M1 K1 P4 M2 K2 P5 M3
Hardness/Rm ≤ 700 N/mm² 600-800 N/mm² 800-1000 N/mm² 900-1200 N/mm²
ap x ae 2D x 0.1D 2D x 0.1D 2D x 0.1D 2D x 0.1D
Vc (m/min) 40-50 30-40 25-35 10-20
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
34780 0.006 90 3720 0.006 60 3180 0.005 50 1590 0.005 20
43580 0.009 95 2790 0.008 70 2390 0.007 50 1190 0.007 20
52870 0.012 100 2230 0.011 70 1910 0.009 50 960 0.009 30
62390 0.015 110 1860 0.014 80 1590 0.012 60 800 0.011 30
81790 0.022 120 1390 0.020 80 1190 0.018 60 600 0.017 30
10 1430 0.028 120 1110 0.025 80 960 0.022 60 480 0.021 30
12 1190 0.033 120 930 0.030 80 800 0.027 60 400 0.025 30
14 1020 0.040 120 800 0.036 90 680 0.032 60 340 0.030 30
16 900 0.046 125 700 0.042 90 600 0.037 70 300 0.035 30
18 800 0.052 125 620 0.047 90 530 0.042 70 270 0.039 30
20 720 0.059 125 560 0.053 90 480 0.047 70 240 0.044 30
22 650 0.065 130 510 0.059 90 430 0.052 70 220 0.049 30
25 570 0.077 130 450 0.069 90 380 0.062 70 190 0.058 30
ap x ae ≤ D5 1.5D x 0.05D
HSS/Co end mills
669
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
UH
HSS/CO-HSSP
END MILLS
h stock standard f non-standard stock m stock exhaustion
D D Tol. d(h6) l l1 L z EDP No. Stock
60/+0.048 6 13 57 3 TAWSH3060 h
80/+0.058 10 19 69 3 TAWSH3080 h
10 0/+0.058 10 22 72 3 TAWSH3100 h
12 0/+0.070 12 26 83 3 TAWSH3120 h
14 0/+0.070 12 26 83 3 TAWSH3140 h
16 0/+0.070 16 32 92 3 TAWSH3160 h
18 0/+0.070 16 32 92 3 TAWSH3180 h
20 0/+0.084 20 38 104 3 TAWSH3200 h
TAWSH3
weldon shank 3 flutes
DIN
844
PMKNSH
+,+,
+ 1st choice , suitable
SLOTTING
SIDE MILLING
HSS/Co end mills
670
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
UH
HSS/CO-HSSP
END MILLS
CUTTING PARAMETERS
TAWSH3
SLOTTING
Material Group
ISO 513 P1 P2 P3 M1 K1 P4 M2 K2 P5 M3
Hardness/Rm ≤ 700 N/mm² 600-800 N/mm² 800-1000 N/mm² 900-1200 N/mm²
ap x ae 0.3D x D 0.3D x D 0.3D x D 0.3D x D
Vc (m/min) 40-60 30-50 25-35 15-25
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
62650 0.020 155 2120 0.018 115 1590 0.015 70 1060 0.014 45
81990 0.029 170 1590 0.026 125 1190 0.022 75 800 0.020 50
10 1590 0.036 170 1270 0.032 125 960 0.027 80 640 0.025 50
12 1330 0.043 170 1060 0.039 125 800 0.032 80 530 0.030 50
14 1140 0.051 175 910 0.046 125 680 0.038 80 450 0.036 50
16 1000 0.060 180 800 0.054 130 600 0.045 80 400 0.042 50
18 880 0.069 185 710 0.062 135 530 0.052 85 350 0.049 50
20 800 0.079 190 640 0.071 135 480 0.059 85 320 0.055 55
SIDE MILLING
Material Group
ISO 513 P1 P2 P3 M1 K1 P4 M2 K2 P5 M3
Hardness/Rm ≤ 700 N/mm² 600-800 N/mm² 800-1000 N/mm² 900-1200 N/mm²
ap x ae 1.5D x 0.5D 1.5D x 0.5D 1.5D x 0.3D 1.5D x 0.3D
Vc (m/min) 50-70 40-60 25-35 20-30
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
63180 0.018 175 2650 0.017 130 1860 0.015 80 1330 0.013 50
82390 0.024 170 1990 0.021 130 1390 0.019 80 1000 0.017 50
10 1910 0.035 200 1590 0.031 150 1110 0.028 90 800 0.024 60
12 1590 0.043 205 1330 0.039 155 930 0.035 95 660 0.030 60
14 1360 0.052 210 1140 0.047 160 800 0.041 100 570 0.036 60
16 1190 0.062 220 1000 0.055 165 700 0.049 105 500 0.043 65
18 1060 0.072 230 880 0.065 170 620 0.058 110 440 0.051 65
20 960 0.083 240 800 0.075 180 560 0.067 110 400 0.058 70
HSS/Co - HSSP end mills
671
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
UH
HSS/CO-HSSP
END MILLS
h stock standard f non-standard stock m stock exhaustion
D D Tol. d(h6) l l1 L z EDP No. Stock EDP No. Stock EDP No. Stock
20/+0.040 6 7 51 4 WS4020 hTAWS4020 h
30/+0.040 6 8 52 4 WS4030 hTAWS4030 hUMWS4030 h
40/+0.040 6 11 55 4 WS4040 hTAWS4040 hUMWS4040 h
50/+0.040 6 13 57 4 WS4050 hTAWS4050 hUMWS4050 h
60/+0.040 6 13 57 4 WS4060 hTAWS4060 hUMWS4060 h
70/+0.040 10 16 66 4 WS4070 hTAWS4070 h
80/+0.040 10 19 69 4 WS4080 hTAWS4080 hUMWS4080 h
90/+0.040 10 19 69 4 WS4090 hTAWS4090 h
10 0/+0.040 10 22 72 4 WS4100 hTAWS4100 hUMWS4100 h
11 0/+0.040 12 22 79 4 WS4110 hTAWS4110 h
12 0/+0.040 12 26 83 4 WS4120 hTAWS4120 hUMWS4120 h
13 0/+0.040 12 26 83 4 WS4130 hTAWS4130 h
14 0/+0.040 12 26 83 4 WS4140 hTAWS4140 hUMWS4140 h
15 0/+0.040 12 26 83 4 WS4150 hTAWS4150 h
16 0/+0.040 16 32 92 4 WS4160 hTAWS4160 hUMWS4160 h
17 0/+0.040 16 32 92 4 TAWS4170 h
18 0/+0.040 16 32 92 4 WS4180 hTAWS4180 hUMWS4180 h
19 0/+0.040 16 32 92 4 TAWS4190 h
20 0/+0.040 20 38 104 4 WS4200 hTAWS4200 hUMWS4200 h
22 0/+0.040 20 38 104 4 WS4220 hTAWS4220 h
24 0/+0.040 25 45 121 6 WS6240 h
25 0/+0.040 25 45 121 4 WS4250 hTAWS4250 h
28 0/+0.040 25 45 121 6 WS6280 hTAWS6280 h
30 0/+0.040 25 45 121 6 WS6300 hTAWS6300 h
32 0/+0.040 32 53 133 6 TAWS6320 h
36 0/+0.040 32 53 133 6 TAWS6360 h
40 0/+0.040 32 63 143 6 TAWS6400 h
WS4(6)-TAWS4(6)-UMWS4
weldon shank, 4 flutes-6 flutes
DIN
844
WS4(6)
TAWS4(6)
WS4(6)
TAWS4(6)
WS4(6)
(
)
TAWS4(6)
UMWS4
UMWS4
PMKNSH
+,+, WS4(6)-TAWS4(6)
+++ UMWS4
+ 1st choice , suitable
SIDE MILLING
WS4(6) TAWS4(6) UMWS4
HSS/Co - HSSP end mills
672
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
UH
HSS/CO-HSSP
END MILLS
CUTTING PARAMETERS
TAWS4
UMWS4 (n and Vf = +20%) - WS4 (n and Vf = -20% ÷ -30%)
SIDE MILLING
Material Group
ISO 513 P1 P2 P3 M1 K1 P4 M2 K2 P5 M3
Hardness/Rm ≤ 700 N/mm² 600-800 N/mm² 800-1000 N/mm² 900-1200 N/mm²
ap x ae 1.5D x 0.5D 1.5D x 0.5D 1.5D x 0.3D 1.5D x 0.3D
Vc (m/min) 50-70 40-60 25-35 20-30
D
(mm)
Z
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
249550 0.006 220 7960 0.005 170 5570 0.005 100 3980 0.004 70
346370 0.006 145 5310 0.005 110 3720 0.005 70 2650 0.004 45
444780 0.009 165 3980 0.008 125 2790 0.007 75 1990 0.006 50
543820 0.012 190 3180 0.011 145 2230 0.010 90 1590 0.009 60
643180 0.016 210 2650 0.015 155 1860 0.013 95 1330 0.012 65
842390 0.021 200 1990 0.019 150 1390 0.017 95 1000 0.016 65
10 4 1910 0.031 235 1590 0.028 175 1110 0.025 110 800 0.023 75
12 4 1590 0.038 245 1330 0.035 185 930 0.031 115 660 0.029 75
14 4 1360 0.046 250 1140 0.041 190 800 0.037 120 570 0.035 80
16 4 1190 0.055 260 1000 0.049 195 700 0.044 125 500 0.041 80
18 4 1060 0.064 275 880 0.058 205 620 0.051 130 440 0.048 85
20 4 960 0.074 285 800 0.067 215 560 0.059 130 400 0.055 90
22 4 870 0.084 295 720 0.076 220 510 0.068 140 360 0.063 90
24 6 800 0.088 425 660 0.079 315 460 0.071 195 330 0.066 130
25 4 760 0.106 320 640 0.095 245 450 0.084 150 320 0.079 100
28 6 680 0.102 420 570 0.092 315 400 0.082 195 280 0.077 130
30 6 640 0.108 415 530 0.097 310 370 0.086 190 270 0.081 130
32 6 600 0.113 410 500 0.102 305 350 0.091 190 250 0.085 130
36 6 530 0.127 405 440 0.114 300 310 0.101 190 220 0.095 125
40 6 480 0.139 400 400 0.125 300 280 0.111 185 200 0.104 125
ap x ae ≤ D3 1.5D x 0.25D 1.5D x 0.25D 1.2D x 0.1D 1.2D x 0.1D
HSS/Co end mills
673
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
UH
HSS/CO-HSSP
END MILLS
h stock standard f non-standard stock m stock exhaustion
D D Tol. d(h6) l l1 L z EDP No. Stock EDP No. Stock
30/+0.040 6 12 56 4 WL4030 hTAWL4030 h
40/+0.040 6 19 63 4 WL4040 hTAWL4040 h
50/+0.040 6 24 68 4 WL4050 hTAWL4050 h
60/+0.040 6 24 68 4 WL4060 hTAWL4060 h
70/+0.050 10 30 80 4 WL4070 hTAWL4070 h
80/+0.050 10 38 88 4 WL4080 hTAWL4080 h
90/+0.050 10 38 88 4 WL4090 hTAWL4090 h
10 0/+0.050 10 45 95 4 WL4100 hTAWL4100 h
11 0/+0.050 12 45 102 4 WL4110 hTAWL4110 h
12 0/+0.050 12 53 110 4 WL4120 hTAWL4120 h
13 0/+0.050 12 53 110 4 WL4130 hTAWL4130 h
14 0/+0.050 12 53 110 4 WL4140 hTAWL4140 h
15 0/+0.050 12 53 110 4 WL4150 hTAWL4150 h
16 0/+0.050 16 63 123 4 WL4160 hTAWL4160 h
17 0/+0.050 16 63 123 4 WL4170 hTAWL4170 h
18 0/+0.050 16 63 123 4 WL4180 hTAWL4180 h
19 0/+0.050 16 63 123 4 WL4190 hTAWL4190 h
20 0/+0.050 20 75 141 4 WL4200 hTAWL4200 h
22 0/+0.050 20 75 141 6 WL6220 hTAWL6220 h
25 0/+0.050 25 90 166 6 WL6250 hTAWL6250 h
30 0/+0.050 25 90 166 6 TAWL6300 h
32 0/+0.050 32 106 186 6 TAWL6320 h
36 0/+0.050 32 106 186 6 TAWL6360 h
40 0/+0.050 40 125 217 6 TAWL6400 h
WL4(6) TAWL4(6)
WL4(6)-TAWL4(6)
weldon shank, 4 flutes-6 flutes, long
DIN
844
WL4(6)
TAWL4(6)
WL4(6)
TAWL4(6)
PMKNSH
+,+,
+ 1st choice , suitable
SIDE MILLING
HSS/Co end mills
674
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
UH
HSS/CO-HSSP
END MILLS
CUTTING PARAMETERS
TAWL4
WL4 (n and Vf = -20% ÷ -30%)
SIDE MILLING
Material Group
ISO 513 P1 P2 P3 M1 K1 P4 M2 K2 P5 M3
Hardness/Rm ≤ 700 N/mm² 600-800 N/mm² 800-1000 N/mm² 900-1200 N/mm²
ap x ae 2D x 0.1D 2D x 0.1D 2D x 0.1D 2D x 0.1D
Vc (m/min) 40-50 30-40 25-35 10-20
D
(mm)
Z
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
344780 0.004 75 3720 0.004 50 3180 0.003 40 1590 0.003 20
443580 0.006 85 2790 0.005 60 2390 0.005 50 1190 0.004 20
542870 0.009 100 2230 0.008 70 1910 0.007 50 960 0.006 20
642390 0.012 115 1860 0.011 80 1590 0.010 60 800 0.009 30
841790 0.015 105 1390 0.013 70 1190 0.012 60 600 0.011 30
10 4 1430 0.021 120 1110 0.019 90 960 0.017 70 480 0.016 30
12 4 1190 0.027 125 930 0.024 90 800 0.021 70 400 0.020 30
14 4 1020 0.032 130 800 0.029 90 680 0.026 70 340 0.024 30
16 4 900 0.038 135 700 0.034 100 600 0.030 70 300 0.028 30
18 4 800 0.045 145 620 0.040 100 530 0.036 80 270 0.033 40
20 4 720 0.050 145 560 0.045 100 480 0.040 80 240 0.038 40
22 6 650 0.056 220 510 0.051 155 430 0.045 115 220 0.042 55
25 6 570 0.068 230 450 0.061 165 380 0.054 125 190 0.051 60
32 6 450 0.077 210 350 0.069 145 300 0.062 110 150 0.054 50
36 6 400 0.085 205 310 0.077 140 270 0.068 110 130 0.060 45
40 6 360 0.095 205 280 0.086 145 240 0.076 110 120 0.067 50
ap x ae ≤ D5 1.5D x 0.05D 1.5D x 0.05D 1.2D x 0.05D 1.2D x 0.05D
HSS/Co end mills
675
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
UH
HSS/CO-HSSP
END MILLS
h stock standard f non-standard stock m stock exhaustion
D(js12) D Tol. d(h6) l l1 L z EDP No. Stock
6+/-0.060 6 13 57 3 TAWSR060 h
7+/-0.075 10 16 66 3 TAWSR070 h
8+/-0.075 10 19 69 3 TAWSR080 h
9+/-0.075 10 19 69 3 TAWSR090 h
10 +/-0.075 10 22 72 4 TAWSR100 h
11 +/-0.090 12 22 79 4 TAWSR110 h
12 +/-0.090 12 26 83 4 TAWSR120 h
13 +/-0.090 12 26 83 4 TAWSR130 h
14 +/-0.090 12 26 83 4 TAWSR140 h
15 +/-0.090 12 26 83 4 TAWSR150 h
16 +/-0.090 16 32 92 4 TAWSR160 h
17 +/-0.090 16 32 92 4 TAWSR170 h
18 +/-0.090 16 32 92 4 TAWSR180 h
20 +/-0.105 20 38 104 4 TAWSR200 h
TAWSR
weldon shank, roughing NR
DIN
844
PMKNSH
+,+,
+ 1st choice , suitable
SLOTTING
SIDE MILLING
HSS/Co end mills
676
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
UH
HSS/CO-HSSP
END MILLS
CUTTING PARAMETERS
TAWSR
SLOTTING
Material Group
ISO 513 P1 P2 P3 M1 K1 P4 M2 K2 P5 M3
Hardness/Rm ≤ 700 N/mm² 600-800 N/mm² 800-1000 N/mm² 900-1200 N/mm²
ap x ae D x D D x D D x D 0.5D x D
Vc (m/min) 40-60 30-50 25-35 15-25
D
(mm)
Z
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
632650 0.022 175 2120 0.020 125 1590 0.018 85 1060 0.017 50
831990 0.028 165 1590 0.025 120 1190 0.022 80 800 0.019 45
10 4 1590 0.035 225 1270 0.032 160 960 0.028 110 640 0.025 65
12 4 1330 0.045 240 1060 0.041 170 800 0.036 115 530 0.032 65
14 4 1140 0.055 250 910 0.050 180 680 0.044 120 450 0.039 70
16 4 1000 0.065 260 800 0.059 185 600 0.052 125 400 0.046 75
18 4 880 0.075 265 710 0.068 190 530 0.060 125 350 0.053 75
20 4 800 0.085 270 640 0.077 195 480 0.068 130 320 0.060 75
SIDE MILLING
Material Group
ISO 513 P1 P2 P3 M1 K1 P4 M2 K2 P5 M3
Hardness/Rm ≤ 700 N/mm² 600-800 N/mm² 800-1000 N/mm² 900-1200 N/mm²
ap x ae 1.5D x 0.5D 1.5D x 0.5D 1.5D x 0.3D 1.5D x 0.3D
Vc (m/min) 50-70 40-60 30-40 20-30
D
(mm)
Z
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
633180 0.026 250 2650 0.024 190 1860 0.021 120 1330 0.018 75
832390 0.033 235 1990 0.030 175 1390 0.026 110 1000 0.023 70
10 4 1910 0.042 320 1590 0.038 180 1110 0.034 110 800 0.029 70
12 4 1590 0.054 345 1330 0.049 195 930 0.043 120 660 0.038 75
14 4 1360 0.066 360 1140 0.059 205 800 0.053 125 570 0.046 80
16 4 1190 0.078 370 1000 0.070 210 700 0.062 130 500 0.055 80
18 4 1060 0.090 380 880 0.081 215 620 0.072 135 440 0.063 85
20 4 960 0.102 390 800 0.092 220 560 0.082 135 400 0.071 85
HSS/Co - HSSP end mills
677
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
UH
HSS/CO-HSSP
END MILLS
h stock standard f non-standard stock m stock exhaustion
D(js12) D Tol. d(h6) l l1 L z EDP No. Stock EDP No. Stock EDP No. Stock
6+/-0.060 6 13 57 3 WSFR060 hTAWSFR060 hUMWSFR060 h
7+/-0.075 10 16 66 3 TAWSFR070 hUMWSFR070 h
8+/-0.075 10 19 69 3 WSFR080 hTAWSFR080 hUMWSFR080 h
9+/-0.075 10 19 69 3 TAWSFR090 hUMWSFR090 h
10 +/-0.075 10 22 72 4 WSFR100 hTAWSFR100 hUMWSFR100 h
11 +/-0.090 12 22 79 4 TAWSFR110 h
12 +/-0.090 12 26 83 4 WSFR120 hTAWSFR120 hUMWSFR120 h
13 +/-0.090 12 26 83 4 TAWSFR130 h
14 +/-0.090 12 26 83 4 WSFR140 hTAWSFR140 hUMWSFR140 h
15 +/-0.090 12 26 83 4 TAWSFR150 h
16 +/-0.090 16 32 92 4 WSFR160 hTAWSFR160 hUMWSFR160 h
17 +/-0.090 16 32 92 4 TAWSFR170 h
18 +/-0.090 16 32 92 4 WSFR180 hTAWSFR180 hUMWSFR180 h
20 +/-0.105 20 38 104 4 WSFR200 hTAWSFR200 hUMWSFR200 h
22 +/-0.105 20 38 104 5 TAWSFR220 h
25 +/-0.105 25 45 121 5 TAWSFR250 h
28 +/-0.105 25 45 121 6 CH TAWSFR280 h
30 +/-0.105 25 45 121 6 TAWSFR300 h
32 +/-0.125 32 53 133 6 TAWSFR320 h
36 +/-0.125 32 53 133 6 TAWSFR360 h
40 +/-0.125 32 63 155 6 TAWSFR400 h
WSFR-TAWSFR-UMWSFR
weldon shank, roughing HR
DIN
844
WSFR
TAWSFR
WSFR TAWSFR
WSFR TAWSFR
UMWSFR
UMWSFR
PMKNSH
+,+, WSFR-TAWSFR
+++ UMWSFR
+ 1st choice , suitable
SLOTTING
SIDE MILLING
WSFR TAWSFR UMWSFR
HSS/Co - HSSP end mills
678
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
UH
HSS/CO-HSSP
END MILLS
CUTTING PARAMETERS
TAWSFR
UMWSFR (n and Vf = +20%) - WSFR (n and Vf = -20% ÷ -30%)
SLOTTING
Material Group
ISO 513 P1 P2 P3 M1 K1 P4 M2 K2 P5 M3
Hardness/Rm ≤ 700 N/mm² 600-800 N/mm² 800-1000 N/mm² 900-1200 N/mm²
ap x ae D x D D x D D x D 0.5D x D
Vc (m/min) 40-60 30-50 25-35 15-25
D
(mm)
Z
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
632650 0.022 175 2120 0.020 125 1590 0.018 85 1060 0.017 50
831990 0.028 165 1590 0.025 120 1190 0.022 80 800 0.019 45
10 4 1590 0.035 225 1270 0.032 160 960 0.028 110 640 0.025 65
12 4 1330 0.045 240 1060 0.041 170 800 0.036 115 530 0.032 65
14 4 1140 0.055 250 910 0.050 180 680 0.044 120 450 0.039 70
16 4 1000 0.065 260 800 0.059 185 600 0.052 125 400 0.046 75
18 4 880 0.075 265 710 0.068 190 530 0.060 125 350 0.053 75
20 4 800 0.085 270 640 0.077 195 480 0.068 130 320 0.060 75
22 5 720 0.086 310 580 0.077 225 430 0.068 145 290 0.060 85
25 5 640 0.099 315 510 0.089 225 380 0.079 150 250 0.069 85
28 6 570 0.100 340 450 0.090 245 340 0.080 165 230 0.070 95
30 6 530 0.108 345 420 0.097 245 320 0.086 165 210 0.076 95
32 6 500 0.116 350 400 0.104 250 300 0.093 165 200 0.081 95
36 6 440 0.130 345 350 0.111 230 270 0.104 170 180 0.091 100
40 6 400 0.145 350 320 0.123 235 240 0.116 165 160 0.102 95
SIDE MILLING
Material Group
ISO 513 P1 P2 P3 M1 K1 P4 M2 K2 P5 M3
Hardness/Rm ≤ 700 N/mm² 600-800 N/mm² 800-1000 N/mm² 900-1200 N/mm²
ap x ae 1.5D x 0.5D 1.5D x 0.5D 1.5D x 0.3D 1.5D x 0.3D
Vc (m/min) 50-70 40-60 30-40 20-30
D
(mm)
Z
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
633180 0.026 250 2650 0.024 190 1860 0.021 120 1330 0.018 75
832390 0.033 235 1990 0.030 175 1390 0.026 110 1000 0.023 70
10 4 1910 0.042 320 1590 0.038 180 1110 0.034 110 800 0.029 70
12 4 1590 0.054 345 1330 0.049 195 930 0.043 120 660 0.038 75
14 4 1360 0.066 360 1140 0.059 205 800 0.053 125 570 0.046 80
16 4 1190 0.078 370 1000 0.070 210 700 0.062 130 500 0.055 80
18 4 1060 0.090 380 880 0.081 215 620 0.072 135 440 0.063 85
20 4 960 0.102 390 800 0.092 220 560 0.082 135 400 0.071 85
22 5 870 0.103 445 720 0.092 200 510 0.082 125 360 0.072 80
25 5 760 0.119 450 640 0.107 205 450 0.095 130 320 0.083 80
28 6 680 0.120 490 570 0.108 245 400 0.096 155 280 0.084 95
30 6 640 0.130 500 530 0.117 245 370 0.104 155 270 0.091 100
32 6 600 0.139 500 500 0.125 250 350 0.111 155 250 0.097 95
36 6 530 0.156 495 440 0.140 245 310 0.125 155 220 0.109 95
40 6 480 0.174 500 400 0.157 250 280 0.139 155 200 0.122 95
HSS/Co end mills
679
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
UH
HSS/CO-HSSP
END MILLS
h stock standard f non-standard stock m stock exhaustion
D(js12) D Tol. d(h6) l l1 L z EDP No. Stock EDP No. Stock
6+/-0.060 6 24 68 3 WLFR060 hTAWLFR060 h
8+/-0.075 10 38 88 3 WLFR080 hTAWLFR080 h
10 +/-0.075 10 45 95 4 WLFR100 hTAWLFR100 h
12 +/-0.090 12 53 110 4 WLFR120 hTAWLFR120 h
14 +/-0.090 12 53 110 4 WLFR140 hTAWLFR140 h
16 +/-0.090 16 63 123 4 WLFR160 hTAWLFR160 h
18 +/-0.090 16 63 123 4 WLFR180 hTAWLFR180 h
20 +/-0.105 20 75 141 4 WLFR200 hTAWLFR200 h
22 +/-0.105 20 75 141 5 TAWLFR220 h
25 +/-0.105 25 90 166 5 TAWLFR250 h
30 +/-0.105 25 90 166 6 TAWLFR300 h
32 +/-0.105 32 106 186 6 TAWLFR320 h
36 +/-0.125 32 106 186 6 TAWLFR360 h
40 +/-0.125 32 125 217 6 TAWLFR400 h
WLFR TAWLFR
WLFR-TAWLFR
weldon shank, roughing HR, long
DIN
844
WLFR TAWLFR
WLFR
TAWLFR
PMKNSH
+,+,
+ 1st choice , suitable
SLOTTING
SIDE MILLING
HSS/Co end mills
680
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
UH
HSS/CO-HSSP
END MILLS
CUTTING PARAMETERS
TAWLFR
WLFR (n and Vf = -20% ÷ -30%)
SLOTTING
Material Group
ISO 513 P1 P2 P3 M1 K1 P4 M2 K2 P5 M3
Hardness/Rm ≤ 700 N/mm² 600-800 N/mm² 800-1000 N/mm² 900-1200 N/mm²
ap x ae 0.5D x D 0.5D x D 0.5D x D 0.3D x D
Vc (m/min) 35-45 25-35 20-30 10-20
D
(mm)
Z
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
632120 0.014 90 1590 0.013 60 1330 0.011 45 800 0.011 25
831590 0.020 95 1190 0.018 65 1000 0.016 50 600 0.014 25
10 4 1270 0.025 125 960 0.022 85 800 0.020 65 480 0.017 35
12 4 1060 0.032 135 800 0.028 90 660 0.025 65 400 0.022 35
14 4 910 0.039 140 680 0.035 95 570 0.031 70 340 0.027 35
16 4 800 0.046 145 600 0.041 100 500 0.036 75 300 0.032 40
18 4 710 0.053 150 530 0.047 100 440 0.042 75 270 0.037 40
20 4 640 0.060 150 480 0.054 105 400 0.048 75 240 0.042 40
22 5 580 0.060 175 430 0.054 115 360 0.048 85 220 0.042 45
25 5 510 0.069 175 380 0.062 120 320 0.055 90 190 0.049 45
28 6 450 0.070 190 340 0.063 130 280 0.056 95 170 0.049 50
30 6 420 0.076 190 320 0.068 130 270 0.060 100 160 0.053 50
32 6 400 0.081 195 300 0.073 130 250 0.065 95 150 0.057 50
36 6 350 0.091 190 270 0.077 125 220 0.073 95 130 0.064 50
40 6 320 0.102 195 240 0.086 125 200 0.081 95 120 0.071 50
SIDE MILLING
Material Group
ISO 513 P1 P2 P3 M1 K1 P4 M2 K2 P5 M3
Hardness/Rm ≤ 700 N/mm² 600-800 N/mm² 800-1000 N/mm² 900-1200 N/mm²
ap x ae 1.5D x 0.3D 1.5D x 0.3D 1.5D x 0.3D 1.5D x 0.2D
Vc (m/min) 40-50 30-40 25-35 10-20
D
(mm)
Z
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
632390 0.017 120 1860 0.015 85 1590 0.013 65 800 0.012 30
831790 0.024 130 1390 0.022 90 1190 0.019 70 600 0.017 30
10 4 1430 0.029 170 1110 0.026 90 960 0.024 70 480 0.021 30
12 4 1190 0.038 180 930 0.034 95 800 0.030 75 400 0.026 30
14 4 1020 0.046 190 800 0.042 100 680 0.037 75 340 0.032 35
16 4 900 0.055 195 700 0.049 105 600 0.044 80 300 0.038 35
18 4 800 0.063 200 620 0.057 105 530 0.050 80 270 0.044 35
20 4 720 0.071 205 560 0.064 110 480 0.057 80 240 0.050 35
22 5 650 0.072 235 510 0.065 100 430 0.057 75 220 0.050 35
25 5 570 0.083 235 450 0.075 100 380 0.067 75 190 0.058 35
28 6 510 0.084 255 400 0.076 120 340 0.067 90 170 0.059 40
30 6 480 0.091 260 370 0.082 120 320 0.073 95 160 0.064 40
32 6 450 0.097 265 350 0.088 125 300 0.078 95 150 0.068 40
36 6 400 0.109 260 310 0.098 120 270 0.087 95 130 0.076 40
40 6 360 0.122 265 280 0.110 125 240 0.097 95 120 0.085 40
HSS/Co end mills
681
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
UH
HSS/CO-HSSP
END MILLS
h stock standard f non-standard stock m stock exhaustion
D(e8) D(e8) Tol. R R Tol. d(h6) l l1 L z EDP No. Stock EDP No. Stock
2-0.014/-0.028 1.00 +0.020/-0.020 6 4 48 2 WSB2020 hTAWSB2020 f
3-0.014/-0.028 1.50 +0.020/-0.020 6 5 49 2 WSB2030 hTAWSB2030 h
4-0.020/-0.038 2.00 +0.020/-0.020 6 7 51 2 WSB2040 hTAWSB2040 h
5-0.020/-0.038 2.50 +0.020/-0.020 6 8 52 2 WSB2050 hTAWSB2050 h
6-0.020/-0.038 3.00 +0.020/-0.020 6 8 52 2 WSB2060 hTAWSB2060 h
8-0.025/-0.047 4.00 +0.020/-0.020 10 11 61 2 WSB2080 hTAWSB2080 h
10 -0.025/-0.047 5.00 +0.020/-0.020 10 13 63 2 WSB2100 hTAWSB2100 h
12 -0.032/-0.059 6.00 +0.020/-0.020 12 16 73 2 WSB2120 hTAWSB2120 h
14 -0.032/-0.059 7.00 +0.020/-0.020 12 16 73 2 WSB2140 hTAWSB2140 h
16 -0.032/-0.059 8.00 +0.020/-0.020 16 19 79 2 WSB2160 hTAWSB2160 h
18 -0.032/-0.059 9.00 +0.020/-0.020 16 19 79 2 WSB2180 hTAWSB2180 h
20 -0.040/-0.073 10.00 +0.020/-0.020 20 22 88 2 WSB2200 hTAWSB2200 h
25 -0.040/-0.073 12.50 +0.020/-0.020 25 26 102 2 WSB2250 h
28 -0.040/-0.073 14.00 +0.020/-0.020 25 26 102 2 WSB2280 f
30 -0.040/-0.073 15.00 +0.020/-0.020 25 26 102 2 WSB2300 f
WSB2 TAWSB2
WSB2-TAWSB2
weldon shank, 2 flutes ball nose
DIN
327
WSB2 TAWSB2
WSB2
TAWSB2
PMKNSH
+,+,
+ 1st choice , suitable
COPYING
R
HSS/Co end mills
682
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
UH
HSS/CO-HSSP
END MILLS
CUTTING PARAMETERS
TAWSB2
WSB2 (n and Vf = -20% ÷ -30%)
COPYING
ae
ap
Material Group
ISO 513 P1 P2 P3 M1 K1 P4 M2 K2 P5 M3
Hardness/Rm ≤ 700 N/mm² 600-800 N/mm² 800-1000 N/mm² 900-1200 N/mm²
ap x ae 0.1 D x 0.2 D 0.1 D x 0.2 D 0.1 D x 0.2 D 0.1 D x 0.2 D
Vc (m/min) 40-60 30-50 25-35 15-25
D
(mm)
D (e.)
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
2 1.20 7960 0.020 320 6370 0.018 230 4780 0.016 150 3180 0.015 100
3 1.80 5310 0.040 420 4250 0.036 310 3180 0.032 200 2120 0.030 130
4 2.40 3980 0.060 480 3180 0.054 340 2390 0.048 230 1590 0.045 140
5 3.00 3180 0.070 450 2550 0.063 320 1910 0.056 210 1270 0.053 130
6 3.60 2650 0.082 430 2120 0.074 310 1590 0.066 210 1060 0.062 130
8 4.80 1990 0.094 370 1590 0.085 270 1190 0.075 180 800 0.071 110
10 6.00 1590 0.110 350 1270 0.099 250 960 0.088 170 640 0.083 110
12 7.20 1330 0.130 350 1060 0.117 250 800 0.104 170 530 0.098 100
14 8.40 1140 0.150 340 910 0.135 250 680 0.120 160 450 0.113 100
16 9.60 1000 0.170 340 800 0.153 240 600 0.136 160 400 0.128 100
18 10.80 880 0.190 330 710 0.171 240 530 0.152 160 350 0.143 100
20 12.00 800 0.210 340 640 0.189 240 480 0.168 160 320 0.158 100
22 13.20 720 0.232 330 580 0.209 240 430 0.186 160 290 0.174 100
25 15.00 640 0.262 340 510 0.236 240 380 0.210 160 250 0.197 100
28 16.80 570 0.285 320 450 0.257 230 340 0.228 160 230 0.214 100
30 18.00 530 0.292 310 420 0.263 220 320 0.233 150 210 0.219 90
_
_
n
(rpm)
Vf
(mm/min)
15° x 1.1 x 1.1
HSS/Co end mills
683
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
UH
HSS/CO-HSSP
END MILLS
h stock standard f non-standard stock m stock exhaustion
WLB2 TAWLB2
WLB2-TAWLB2
weldon shank, 2 flutes ball nose, long
DIN
1889
WLB2 TAWLB2
WLB2
TAWLB2
PMKNSH
+,+,
+ 1st choice , suitable
COPYING
D(e8) D(e8) Tol. R R Tol. d(h6) l l1 L z EDP No. Stock EDP No. Stock
3-0.014/-0.028 1.50 +0.020/-0.020 6 8 56 2 WLB2030 hTAWLB2030 f
4-0.020/-0.038 2.00 +0.020/-0.020 6 11 63 2 WLB2040 hTAWLB2040 f
5-0.020/-0.038 2.50 +0.020/-0.020 6 13 68 2 WLB2050 hTAWLB2050 f
6-0.020/-0.038 3.00 +0.020/-0.020 6 13 68 2 WLB2060 hTAWLB2060 f
8-0.025/-0.047 4.00 +0.020/-0.020 10 19 88 2 WLB2080 hTAWLB2080 f
10 -0.025/-0.047 5.00 +0.020/-0.020 10 22 95 2 WLB2100 hTAWLB2100 f
12 -0.032/-0.059 6.00 +0.020/-0.020 12 26 110 2 WLB2120 hTAWLB2120 f
14 -0.032/-0.059 7.00 +0.020/-0.020 12 26 110 2 WLB2140 hTAWLB2140 f
16 -0.032/-0.059 8.00 +0.020/-0.020 16 32 123 2 WLB2160 hTAWLB2160 f
18 -0.032/-0.059 9.00 +0.020/-0.020 16 32 123 2 WLB2180 hTAWLB2180 f
20 -0.040/-0.073 10.00 +0.020/-0.020 20 38 141 2 WLB2200 hTAWLB2200 f
R
HSS/Co end mills
684
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
UH
HSS/CO-HSSP
END MILLS
CUTTING PARAMETERS
TAWLB2
WLB2 (n and Vf = -20% ÷ -30%)
COPYING
ae
ap
Material Group
ISO 513 P1 P2 P3 M1 K1 P4 M2 K2 P5 M3
Hardness/Rm ≤ 700 N/mm² 600-800 N/mm² 800-1000 N/mm² 900-1200 N/mm²
ap x ae 0.1 D x 0.2 D 0.1 D x 0.2 D 0.1 D x 0.2 D 0.1 D x 0.2 D
Vc (m/min) 30-50 25-35 20-30 12-18
D
(mm)
D (e.)
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
3 1.80 4250 0.034 290 3180 0.031 190 2650 0.027 140 1590 0.026 80
4 2.40 3180 0.051 320 2390 0.046 220 1990 0.041 160 1190 0.038 90
5 3.00 2550 0.060 300 1910 0.054 200 1590 0.048 150 960 0.045 90
6 3.60 2120 0.070 300 1590 0.063 200 1330 0.056 150 800 0.052 80
8 4.80 1590 0.080 250 1190 0.072 170 1000 0.064 130 600 0.060 70
10 6.00 1270 0.094 240 960 0.084 160 800 0.075 120 480 0.070 70
12 7.20 1060 0.111 230 800 0.099 160 660 0.088 120 400 0.083 70
14 8.40 910 0.128 230 680 0.115 160 570 0.102 120 340 0.096 70
16 9.60 800 0.145 230 600 0.130 160 500 0.116 120 300 0.108 70
18 10.80 710 0.162 230 530 0.145 150 440 0.129 110 270 0.121 70
20 12.00 640 0.179 230 480 0.161 150 400 0.143 110 240 0.134 60
_
_
n
(rpm)
Vf
(mm/min)
15° x 1.1 x 1.1
HSS end mills
685
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
UH
HSS/CO-HSSP
END MILLS
h stock standard f non-standard stock m stock exhaustion
D D Tol. d1 d1 Tol. H H Tol. z EDP No. Stock EDP No. Stock
40 +0.250/-0.150 16 +0.020/0 32 +0.50/0 8 FM40 hTAFM40 h
50 +0.250/-0.150 22 +0.020/0 36 +0.50/0 8 FM50 hTAFM50 h
63 +0.250/-0.150 27 +0.020/0 40 +0.50/0 8 FM63 hTAFM63 h
80 +0.250/-0.150 27 +0.020/0 45 +0.50/0 10 FM80 fTAFM80 f
100 +0.250/-0.150 32 +0.020/0 50 +0.50/0 10 FM100 fTAFM100 f
FM TAFM
FM-TAFM
shell mill, multi flute
DIN
1880
FM TAFM
FM
TAFM
PMKNSH
+,+,
+ 1st choice , suitable
SIDE MILLING
HSS end mills
686
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
UH
HSS/CO-HSSP
END MILLS
CUTTING PARAMETERS
TAFM
FM (n and Vf = -20% ÷ -30%)
SIDE MILLING
Material Group
ISO 513 P1 P2 P3 M1 K1 P4 M2 K2 P5 M3
Hardness/Rm ≤ 700 N/mm² 600-800 N/mm² 800-1000 N/mm² 900-1200 N/mm²
ap x ae 0.25D x 0.75D 0.25D x 0.75D 0.25D x 0.75D 0.25D x 0.75D
Vc (m/min) 40-60 30-50 25-35 15-25
D
(mm)
Z
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
40 8 400 0.060 190 320 0.054 140 240 0.048 90 160 0.045 60
50 8 320 0.070 180 250 0.063 125 190 0.056 85 130 0.053 55
63 8 250 0.080 200 200 0.072 145 150 0.064 95 100 0.060 60
80 10 200 0.100 200 160 0.090 145 120 0.080 95 80 0.075 60
100 10 160 0.120 190 130 0.108 140 100 0.096 95 60 0.090 55
HSS end mills
687
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
UH
HSS/CO-HSSP
END MILLS
h stock standard f non-standard stock m stock exhaustion
D D Tol. d1 d1 Tol. H H Tol. z EDP No. Stock EDP No. Stock
40 +0.250/-0.150 16 +0.020/0 32 +0.50/0 6 FFR40 hTAFFR40 h
50 +0.250/-0.150 22 +0.020/0 36 +0.50/0 8 FFR50 hTAFFR50 h
63 +0.250/-0.150 27 +0.020/0 40 +0.50/0 8 FFR63 hTAFFR50 h
80 +0.250/-0.150 27 +0.020/0 45 +0.50/0 10 FFR80 fTAFFR63 f
100 +0.250/-0.150 32 +0.020/0 50 +0.50/0 10 FFR100 fTAFFR100 f
FFR TAFFR
FFR-TAFFR
shell mill, multi flute, roughing HR
DIN
1880 Z6~Z10
FFR TAFFR
FFR
TAFFR
PMKNSH
+,+,
+ 1st choice , suitable
SIDE MILLING
HSS end mills
688
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
UH
HSS/CO-HSSP
END MILLS
CUTTING PARAMETERS
TAFFR
FFR (n and Vf = -20% ÷ -30%)
SIDE MILLING
Material Group
ISO 513 P1 P2 P3 M1 K1 P4 M2 K2 P5 M3
Hardness/Rm ≤ 700 N/mm² 600-800 N/mm² 800-1000 N/mm² 900-1200 N/mm²
ap x ae 0.25D x 0.75D 0.25D x 0.75D 0.25D x 0.75D 0.25D x 0.75D
Vc (m/min) 40-60 30-50 25-35 15-25
D
(mm)
Z
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
40 8 400 0.080 255 320 0.072 185 240 0.064 125 160 0.060 75
50 8 320 0.100 255 250 0.090 180 190 0.080 120 130 0.075 80
63 8 250 0.120 300 200 0.108 215 150 0.096 145 100 0.090 90
80 10 200 0.120 240 160 0.108 175 120 0.096 115 80 0.090 70
100 10 160 0.140 225 130 0.126 165 100 0.112 110 60 0.105 65
HSS end mills
689
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
UH
HSS/CO-HSSP
END MILLS
h stock standard f non-standard stock m stock exhaustion
D R R(H11) Tol. d(h6) L z EDP No. Stock
81.00 +0.060/0 10 60 4 WCR080 h
91.50 +0.060/0 10 60 4 WCR090 h
10 2.00 +0.060/0 10 60 4 WCR100 h
11 2.50 +0.060/0 10 60 4 WCR110 h
12 3.00 +0.060/0 12 60 4 WCR120 h
13 3.50 +0.075/0 12 60 4 WCR130 h
14 4.00 +0.075/0 12 60 4 WCR140 h
15 4.50 +0.075/0 12 60 4 WCR150 h
16 5.00 +0.075/0 12 60 4 WCR160 h
19 5.50 +0.075/0 16 67 4 WCR190 h
20 6.00 +0.075/0 16 67 4 WCR200 h
21 6.50 +0.090/0 16 71 4 WCR210 h
22 7.00 +0.090/0 16 71 4 WCR220 h
23 7.50 +0.090/0 16 71 4 WCR230 h
24 8.00 +0.090/0 16 71 4 WCR240 h
25 8.50 +0.090/0 25 85 4 WCR250 h
26 9.00 +0.090/0 25 85 4 WCR260 h
27 9.50 +0.090/0 25 85 4 WCR270 h
28 10.00 +0.090/0 25 85 4 WCR280 h
32 11.00 +0.110/0 25 90 4 WCR320 h
WCR
corner rounding
DIN
6518
PMKNSH
+,+,
+ 1st choice , suitable
ROUNDING
HSS end mills
690
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
UH
HSS/CO-HSSP
END MILLS
CUTTING PARAMETERS
WCR
ROUNDING
Material Group
ISO 513 P1 P2 P3 P4 M1 M2 K1 K2 N1 N2 N3 N4
Hardness/Rm <800 N/mm² <750 N/mm² <350 HB
ap x ae 0.2D x 0.2D 0.2D x 0.2D 0.2D x 0.2D 0.2D x 0.2D
Vc (m/min) 30-50 15-25 30-40 60-80
D
(mm)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
81590 0.006 40 800 0.004 10 1390 0.005 30 2790 0.007 70
91420 0.008 45 710 0.006 15 1240 0.007 35 2480 0.009 85
10 1270 0.010 50 640 0.007 20 1110 0.009 40 2230 0.011 100
11 1160 0.012 55 580 0.008 20 1010 0.010 40 2030 0.013 105
12 1060 0.015 60 530 0.010 20 930 0.012 45 1860 0.016 120
13 980 0.017 65 490 0.012 25 860 0.014 50 1710 0.019 130
14 910 0.020 70 450 0.014 25 800 0.017 55 1590 0.021 135
15 850 0.023 75 420 0.016 25 740 0.019 55 1490 0.025 150
16 800 0.025 80 400 0.018 30 700 0.021 60 1390 0.028 155
17 750 0.026 80 370 0.018 25 660 0.022 60 1310 0.029 150
18 710 0.027 75 350 0.019 25 620 0.023 55 1240 0.030 145
19 670 0.029 75 340 0.020 25 590 0.024 55 1170 0.031 145
20 640 0.030 75 320 0.021 25 560 0.026 55 1110 0.033 145
21 610 0.033 80 300 0.023 25 530 0.028 60 1060 0.036 150
22 580 0.035 80 290 0.025 30 510 0.030 60 1010 0.039 155
23 550 0.038 85 280 0.026 30 480 0.032 60 970 0.041 160
24 530 0.040 85 270 0.028 30 460 0.034 65 930 0.044 165
25 510 0.042 85 250 0.029 30 450 0.035 65 890 0.046 165
26 490 0.043 85 240 0.030 30 430 0.037 65 860 0.047 165
27 470 0.045 85 240 0.031 30 410 0.038 60 830 0.049 165
28 450 0.046 85 230 0.032 30 400 0.039 65 800 0.051 160
32 400 0.050 80 200 0.035 30 350 0.043 60 700 0.055 155
HSS end mills
691
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
UH
HSS/CO-HSSP
END MILLS
h stock standard f non-standard stock m stock exhaustion
D D Tol. d(h6) H L alfa z EDP No. Stock
16 +/-0.065 12 4 60 45° 6 WDC45160 h
20 +/-0.065 12 5 63 45° 6 WDC45200 h
22 +/-0.065 12 6 67 45° 6 WDC45220 h
25 +/-0.065 16 6.3 67 45° 8 WDC45250 h
28 +/-0.065 16 7.5 67 45° 8 WDC45280 h
32 +/-0.080 16 8 71 45° 10 WDC45320 h
38 +/-0.080 16 10 80 45° 12 WDC45380 f
16 +/-0.065 12 6.3 60 60° 6 WDC60160 h
20 +/-0.065 12 8 63 60° 6 WDC60200 h
22 +/-0.065 12 9 67 60° 6 WDC60220 h
25 +/-0.065 16 10 67 60° 8 WDC60250 h
28 +/-0.065 16 11 67 60° 8 WDC60280 h
32 +/-0.080 16 12.5 71 60° 10 WDC60320 h
38 +/-0.080 16 16 80 60° 12 WDC60380 f
WDC
Dovetail cutter
DIN
1833
WDC 45 WDC 60
PMKNSH
+,+,
+ 1st choice , suitable
DOVETAIL B
45°-60°
HSS end mills
692
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
UH
HSS/CO-HSSP
END MILLS
CUTTING PARAMETERS
WDC 45° - 60°
DOVETAIL B
45°-60°
Material Group
ISO 513 P1 P2 P3 P4 M1 M2 K1 K2 N1 N2 N3 N4
Hardness/Rm <800 N/mm² <750 N/mm² <350 HB
ap x ae 0.2D x 0.15D 0.2D x 0.15D 0.2D x 0.15D 0.2D x 0.15D
Vc (m/min) 30-50 15-25 30-40 50-70
D
(mm) z
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
16 6 800 0.015 70 400 0.011 25 700 0.013 55 1190 0.017 120
20 6 640 0.017 65 320 0.012 20 560 0.014 45 960 0.018 105
22 6 580 0.018 65 290 0.013 20 510 0.015 45 870 0.020 105
25 8 510 0.020 80 250 0.014 20 450 0.017 45 760 0.022 100
28 8 450 0.023 80 230 0.016 20 400 0.019 45 680 0.025 100
32 10 400 0.025 100 200 0.018 20 350 0.021 45 600 0.028 100
38 12 340 0.028 115 170 0.020 20 290 0.024 40 500 0.031 90
HSS end mills
693
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
UH
HSS/CO-HSSP
END MILLS
h stock standard f non-standard stock m stock exhaustion
D D Tol. d(h6) H L alfa z EDP No. Stock
16 +/-0.065 12 4 60 45° 6 WDD45160 h
20 +/-0.065 12 5 63 45° 6 WDD45200 h
22 +/-0.065 12 6 67 45° 6 WDD45220 h
25 +/-0.065 16 6.3 67 45° 8 WDD45250 h
28 +/-0.065 16 7.5 67 45° 8 WDD45280 h
32 +/-0.080 16 8 71 45° 10 WDD45320 h
38 +/-0.080 16 10 80 45° 12 WDD45380 f
16 +/-0.065 12 6.3 60 60° 6 WDD60160 h
20 +/-0.065 12 8 63 60° 6 WDD60200 h
22 +/-0.065 12 9 67 60° 6 WDD60220 h
25 +/-0.065 16 10 67 60° 8 WDD60250 h
28 +/-0.065 16 11 67 60° 8 WDD60280 h
32 +/-0.080 16 12.5 71 60° 10 WDD60320 h
38 +/-0.080 16 16 80 60° 12 WDD60380 f
WDD
Dovetail cutter
DIN
1833
WDD 45 WDD 60
H
D
PMKNSH
+,+,
+ 1st choice , suitable
DOVETAIL A
45°-60°
HSS end mills
694
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
UH
HSS/CO-HSSP
END MILLS
CUTTING PARAMETERS
WDD 45° - 60°
DOVETAIL A
45°-60°
Material Group
ISO 513 P1 P2 P3 P4 M1 M2 K1 K2 N1 N2 N3 N4
Hardness/Rm <800 N/mm² <750 N/mm² <350 HB
ap x ae 0.2D x 0.15D 0.2D x 0.15D 0.2D x 0.15D 0.2D x 0.15D
Vc (m/min) 30-50 15-25 30-40 50-70
D
(mm) z
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
16 6 800 0.015 70 400 0.011 25 700 0.013 55 1190 0.017 120
20 6 640 0.017 65 320 0.012 20 560 0.014 45 960 0.018 105
22 6 580 0.018 65 290 0.013 20 510 0.015 45 870 0.020 105
25 8 510 0.020 80 250 0.014 20 450 0.017 45 760 0.022 100
28 8 450 0.023 80 230 0.016 20 400 0.019 45 680 0.025 100
32 10 400 0.025 100 200 0.018 20 350 0.021 45 600 0.028 100
38 12 340 0.028 115 170 0.020 20 290 0.024 40 500 0.031 90
HSS end mills
695
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
UH
HSS/CO-HSSP
END MILLS
h stock standard f non-standard stock m stock exhaustion
D(d11) D(d11) Tol. d(h6) d1(h12) d1 Tol. H(d11) H Tol. L z EDP No. Stock
12.5 -0.050/-0.160 10 5 0/-0.012 6 -0-030/-0.105 57 6 WTM125 h
16 -0.050/-0.160 10 6.5 0/-0.015 8 -0-040/-0.130 62 6 WTM160 h
18 -0.050/-0.160 12 8 0/-0.015 8 -0-040/-0.130 70 6 WTM180 h
19 -0.065/-0.195 12 8 0/-0.015 9 -0-040/-0.130 71 6 WTM190 h
21 -0.065/-0.195 12 10 0/-0.015 9 -0-040/-0.130 74 6 WTM210 h
22 -0.065/-0.195 12 10 0/-0.015 10 -0-040/-0.130 75 6 WTM220 h
25 -0.065/-0.195 16 12 0/-0.018 11 -0-050/-0.160 82 6 WTM250 h
28 -0.065/-0.195 16 13 0/-0.018 12 -0-050/-0.160 83 6 WTM280 h
32 -0.080/-0.240 16 15 0/-0.018 14 -0-050/-0.160 90 8 WTM320 h
36 -0.080/-0.240 25 17 0/-0.018 16 -0-050/-0.160 103 8 WTM360 h
WTM
T-slot
DIN
851
PMKNSH
+,+,
+ 1st choice , suitable
T SLOT
HSS end mills
696
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
UH
HSS/CO-HSSP
END MILLS
CUTTING PARAMETERS
WTM
T SLOT
Material Group
ISO 513 P1 P2 P3 P4 M1 M2 K1 K2 N1 N2 N3 N4
Hardness/Rm <800 N/mm² <750 N/mm² <350 HB
ap x ae DIN Norm 650 DIN Norm 650 DIN Norm 650 DIN Norm 650
Vc (m/min) 25-35 12-18 20-30 40-60
D
(mm) z
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
12.5 6 760 0.010 45 380 0.007 15 640 0.009 35 1270 0.011 85
16 6 600 0.025 90 300 0.018 30 500 0.021 65 1000 0.028 165
18 6 530 0.030 95 270 0.021 35 440 0.026 65 880 0.033 175
19 6 500 0.035 105 250 0.025 35 420 0.030 75 840 0.039 195
21 6 450 0.040 110 230 0.028 40 380 0.034 80 760 0.044 200
22 6 430 0.043 110 220 0.030 40 360 0.036 80 720 0.047 200
25 6 380 0.045 105 190 0.032 35 320 0.038 75 640 0.050 190
28 6 340 0.050 100 170 0.035 35 280 0.043 70 570 0.055 190
32 8 300 0.057 135 150 0.040 50 250 0.048 95 500 0.063 250
36 8 270 0.065 140 130 0.046 45 220 0.055 95 440 0.072 250
HSS end mills
697
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
ALU
MEF
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
UH
HSS/CO-HSSP
END MILLS
h stock standard f non-standard stock m stock exhaustion
D(h11) D Tol. d(h6) H(e8) H Tol. L z EDP No. Stock
10.5 0/-0.110 6 2 -0.032/-0.059 50 8 WWK105A h
10.5 0/-0.110 6 2.5 -0.032/-0.059 50 8 WWK105B h
10.5 0/-0.110 6 3 -0.032/-0.059 50 8 WWK105C h
13.5 0/-0.110 10 2 -0.032/-0.059 56 8 WWK135A h
13.5 0/-0.110 10 2.5 -0.032/-0.059 56 8 WWK135B h
13.5 0/-0.110 10 3 -0.032/-0.059 56 8 WWK135C h
13.5 0/-0.110 10 4 -0.032/-0.059 56 8 WWK135D h
16.5 0/-0.110 10 2.5 -0.032/-0.059 56 8 WWK165B h
16.5 0/-0.110 10 3 -0.032/-0.059 56 8 WWK165C h
16.5 0/-0.110 10 4 -0.032/-0.059 56 8 WWK165D h
16.5 0/-0.110 10 5 -0.032/-0.059 56 8 WWK165E h
19.5 0/-0.130 10 3 -0.040/-0.073 63 8 WWK195C h
19.5 0/-0.130 10 4 -0.040/-0.073 63 8 WWK195D h
19.5 0/-0.130 10 5 -0.040/-0.073 63 8 WWK195E h
19.5 0/-0.130 10 6 -0.040/-0.073 63 8 WWK195F h
22.5 0/-0.130 10 4 -0.040/-0.073 63 10 WWK225D h
22.5 0/-0.130 10 5 -0.040/-0.073 63 10 WWK225E h
22.5 0/-0.130 10 6 -0.040/-0.073 63 10 WWK225F h
22.5 0/-0.130 10 8 -0.040/-0.073 63 10 WWK225H h
25.5 0/-0.130 10 5 -0.040/-0.073 63 10 WWK255E h
25.5 0/-0.130 10 6 -0.040/-0.073 63 10 WWK255F h
25.5 0/-0.130 10 7 -0.040/-0.073 63 10 WWK255G h
25.5 0/-0.130 10 8 -0.040/-0.073 63 10 WWK255H h
28.5 0/-0.130 10 5 -0.040/-0.073 63 10 WWK285E h
28.5 0/-0.130 10 6 -0.040/-0.073 63 10 WWK285F h
28.5 0/-0.130 10 7 -0.040/-0.073 63 10 WWK285G h
28.5 0/-0.130 10 8 -0.040/-0.073 63 10 WWK285H h
32.5 0/-0.160 12 5 -0.050/-0.089 71 12 WWK325E h
32.5 0/-0.160 12 6 -0.050/-0.089 71 12 WWK325F h
32.5 0/-0.160 12 7 -0.050/-0.089 71 12 WWK325G h
32.5 0/-0.160 12 8 -0.050/-0.089 71 12 WWK325H h
32.5 0/-0.160 12 10 -0.050/-0.089 71 12 WWK325L h
WWK
Woodruff
DIN
850
PMKNSH
+,+,
+ 1st choice , suitable
WOODRUFF
HSS end mills
698
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
ALU
CARBIDE
BURRS
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
UH
HSS/CO-HSSP
END MILLS
CUTTING PARAMETERS
WWK
WOODRUFF
Material Group
ISO 513 P1 P2 P3 P4 M1 M2 K1 K2 N1 N2 N3 N4
Hardness/Rm <800 N/mm² <750 N/mm² <350 HB
ap x ae DIN Norm 6888 DIN Norm 6888 DIN Norm 6888 DIN Norm 6888
Vc (m/min) 25-35 12-18 20-30 40-60
D
(mm) z
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
n
(rpm)
fz
(mm/z)
Vf
(mm/min)
10.5 8 910 0.010 75 450 0.007 25 760 0.009 50 1520 0.011 135
13.5 8 710 0.018 100 350 0.012 35 590 0.015 70 1180 0.019 180
16.5 8 580 0.025 115 290 0.018 40 480 0.021 80 970 0.028 215
19.5 8 490 0.033 125 240 0.023 45 410 0.028 90 820 0.036 235
22.5 10 420 0.040 170 210 0.028 60 350 0.034 120 710 0.044 310
25.5 10 370 0.045 165 190 0.032 60 310 0.038 120 620 0.050 305
28.5 10 340 0.050 170 170 0.035 60 280 0.043 120 560 0.055 310
32.5 12 290 0.055 190 150 0.039 70 240 0.047 135 490 0.061 355
CARBIDE BURRS
Selection Guide
Indice grafico Auswahlhilfe Indice graphique Índice gráfico Руководство по выбору
700
ITEM No. PAGE Ø3 mm Ø6 mm
SA 703
SB 704
SC 705
SD 706
SE 707
SF 708
SG 709
SH 710
SJ 711
SK 712
SL 713
SM 714
SN 715
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
ALU
MEF
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
UH
HSS/CO-HSSP
END MILLS
CARBIDE
BURRS
CARBIDE BURRS
STEEL AND HARDENED STEEL < 55 HRC
Don’t miss the Osawa quality on carbide rotary burrs,
available in a wide variety of shapes and geometries.
Ritrovate tutta la qualità Osawa anche nella gamma di lime
rotative in metallo duro, disponibili in un’ampia scelta di forme
e geometrie.
Die Osawa- Qualität steht auch für Hartmetall-Rotierfeilen.
Diese sind in einer breiten Auswahl an Formen und Geometrien
erhältlich.
Retrouvez toute la qualité Osawa dans la gamme de limes
rotatives carbure, disponibles dans une grande variété de
formes et géométries.
Toda la calidad Osawa también se propone en la gama
de limas rotativas de metal duro, disponibles con una amplia
variedad de formas y geometrías.
Широкий выбор форм и геометрии в сочетании
с высочайшим качеством характеризует линию
твёрдосплавных борфрез Osawa.
702
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
ALU
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
UH
HSS/CO-HSSP
END MILLS
CARBIDE
BURRS
CARBIDE BURRS
M
Double cut
Doppio taglio
2 Schneiden
Coupe double
Doble corte
Двойная заточка
MPC
Plain cut
Taglio piano
Flachschneide
Coupe plane
Corte plano
Обычная заточка
MFN
Alucut
SPEED TABLE
TABELLA VELOCITÀ
GESCHWINDIGKEITSTABELLE
TABLEAU DE VITESSE
TABLA DE VELOCIDAD
ТАБЛИЦА СКОРОСТЕЙ
M
MPC
MNF
Carbide Burrs
703
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
ALU
MEF
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
UH
HSS/CO-HSSP
END MILLS
CARBIDE
BURRS
h stock standard f non-standard stock m stock exhaustion
SA OSAWA
NORM
Always wear goggles when using the rotary burrs
Per l’uso delle lime rotative è obbligatorio indossare occhiali protettivi
Tragen Sie immer die Schutzbrille wenn Sie die Fräser benutzen
Toujours porter les lunettes de securité en utilisant les limes rotatives
Para usar las limas rotativas es obligatorio usar gafas de protección
При работе с борфрезами всегда используйте защитные очки
M MPC MNF
D d (3) d (6) l L ANGLE PACKAGING EDP No. Stock EDP No. Stock EDP No. Stock
1.5 3 6 38 5 SA41M hSA41MPC h
2.5 3 11 38 5 SA42M hSA42MPC h
3.0 3 14 38 5 SA43M hSA43MPC h
3.0 6 12 50 5 SA11M hSA11MPC f
4.0 3 12 38 5 SA52M hSA52MPC h
4.0 6 13 50 5 SA13M hSA13MPC f
5.0 3 12.7 38 5 SA53M hSA53MPC h
5.0 6 16 50 5 SA14M hSA14MPC f
6.0 6 18 50 5 SA1M hSA1MPC fSA1MNF f
6.3 3 12.7 45 5 SA51M hSA51MPC h
8.0 6 19 64 5 SA2M hSA2MPC f
9.5 6 19 64 5 SA3M hSA3MPC fSA3MNF f
11.0 6 25 70 5 SA4M hSA4MPC f
12.7 6 25 70 5 SA5M hSA5MPC fSA5MNF f
16.0 6 25 70 5 SA6M hSA6MPC fSA6MNF f
19.0 6 25 70 5 SA7M hSA7MPC fSA7MNF f
25.0 6 25 70 5 SA9M hSA9MPC f
Carbide Burrs
704
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
ALU
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
UH
HSS/CO-HSSP
END MILLS
CARBIDE
BURRS
h stock standard f non-standard stock m stock exhaustion
D d (3) d (6) l L ANGLE PACKAGING EDP No. Stock EDP No. Stock EDP No. Stock
1.5 3 6 38 5 SB41M hSB41MPC h
2.5 3 11 38 5 SB42M hSB42MPC h
3.0 3 14 38 5 SB43M hSB43MPC h
3.0 6 12 50 5 SB11M hSB11MPC f
4.0 6 13 50 5 SB13M hSB13MPC f
5.0 6 16 50 5 SB14M hSB14MPC f
6.0 6 18 50 5 SB1M hSB1MPC fSB1MNF f
6.3 3 4.7 44 5 SB51M hSB51MPC h
8.0 6 19 64 5 SB2M hSB2MPC f
9.5 6 19 64 5 SB3M hSB3MPC fSB3MNF f
11.0 6 25 70 5 SB4M hSB4MPC f
12.7 6 25 70 5 SB5M hSB5MPC fSB5MNF f
16.0 6 25 70 5 SB6M hSB6MPC fSB6MNF f
19.0 6 25 70 5 SB7M fSB7MPC fSB7MNF f
25.0 6 25 70 5 SB9M fSB9MPC f
SB OSAWA
NORM
Always wear goggles when using the rotary burrs
Per l’uso delle lime rotative è obbligatorio indossare occhiali protettivi
Tragen Sie immer die Schutzbrille wenn Sie die Fräser benutzen
Toujours porter les lunettes de securité en utilisant les limes rotatives
Para usar las limas rotativas es obligatorio usar gafas de protección
При работе с борфрезами всегда используйте защитные очки
M MPC MNF
Carbide Burrs
705
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
ALU
MEF
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
UH
HSS/CO-HSSP
END MILLS
CARBIDE
BURRS
h stock standard f non-standard stock m stock exhaustion
D d (3) d (6) l L ANGLE PACKAGING EDP No. Stock EDP No. Stock EDP No. Stock
2.5 3 11 38 5 SC41M hSC41MPC h
3.0 3 14 38 5 SC42M hSC42MPC h
3.0 6 12 50 5 SC11M hSC11MPC f
4.0 6 13 50 5 SC13M hSC13MPC f
5.0 3 12.7 38 5 SC53M hSC53MPC h
5.0 6 16 50 5 SC14M hSC14MPC f
6.0 6 18 50 5 SC1M hSC1MPC fSC1MNF f
6.3 3 12.7 45 5 SC51M hSC51MPC h
8.0 6 19 63 5 SC2M hSC2MPC f
9.5 6 19 63 5 SC3M hSC3MPC fSC3MNF f
11.0 6 25 70 5 SC4M hSC4MPC f
12.7 6 25 70 5 SC5M hSC5MPC fSC5MNF f
16.0 6 25 70 5 SC6M hSC6MPC fSC6MNF f
19.0 6 25 70 5 SC7M fSC7MPC fSC7MNF f
25.0 6 25 70 5 SC9M fSC9MPC f
SC OSAWA
NORM
Always wear goggles when using the rotary burrs
Per l’uso delle lime rotative è obbligatorio indossare occhiali protettivi
Tragen Sie immer die Schutzbrille wenn Sie die Fräser benutzen
Toujours porter les lunettes de securité en utilisant les limes rotatives
Para usar las limas rotativas es obligatorio usar gafas de protección
При работе с борфрезами всегда используйте защитные очки
M MPC MNF
Carbide Burrs
706
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
ALU
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
UH
HSS/CO-HSSP
END MILLS
CARBIDE
BURRS
h stock standard f non-standard stock m stock exhaustion
D d (3) d (6) l L ANGLE PACKAGING EDP No. Stock EDP No. Stock EDP No. Stock
2.5 3 2.3 38 5 SD41M hSD41MPC h
3.0 3 2.5 38 5 SD42M hSD42MPC h
3.0 6 2.5 50 5 SD11M hSD11MPC f
5.0 3 4.7 38 5 SD53M hSD53MPC h
5.0 6 4 50 5 SD14M hSD14MPC f
6.0 6 4.7 50 5 SD1M hSD1MPC fSD1MNF f
6.3 3 5 38 5 SD51M hSD51MPC h
8.0 6 6 52 5 SD2M hSD2MPC f
9.5 6 8 54 5 SD3M hSD3MPC fSD3MNF f
11.0 6 9.5 55 5 SD4M hSD4MPC f
12.7 6 11 56 5 SD5M hSD5MPC fSD5MNF f
16.0 6 14 60 5 SD6M hSD6MPC fSD6MNF f
19.0 6 16.5 62 5 SD7M hSD7MPC fSD7MNF f
25.0 6 22 68 5 SD9M hSD9MPC f
SD OSAWA
NORM
Always wear goggles when using the rotary burrs
Per l’uso delle lime rotative è obbligatorio indossare occhiali protettivi
Tragen Sie immer die Schutzbrille wenn Sie die Fräser benutzen
Toujours porter les lunettes de securité en utilisant les limes rotatives
Para usar las limas rotativas es obligatorio usar gafas de protección
При работе с борфрезами всегда используйте защитные очки
M MPC MNF
Carbide Burrs
707
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
ALU
MEF
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
UH
HSS/CO-HSSP
END MILLS
CARBIDE
BURRS
h stock standard f non-standard stock m stock exhaustion
D d (3) d (6) l L ANGLE PACKAGING EDP No. Stock EDP No. Stock EDP No. Stock
3.0 3 5.5 38 5 SE41M hSE41MPC h
6.0 6 10 50 5 SE1M hSE1MPC f
5.0 3 7.1 38 5 SE53M hSE53MPC h
6.3 3 9.5 42 5 SE51M hSE51MPC h
9.5 6 16 60 5 SE3M hSE3MPC fSE3MNF f
12.7 6 22 67 5 SE5M hSE5MPC fSE5MNF f
16.0 6 25 70 5 SE6M hSE6MPC fSE6MNF f
19.0 6 25 70 5 SE7M fSE7MPC fSE7MNF f
SE OSAWA
NORM
Always wear goggles when using the rotary burrs
Per l’uso delle lime rotative è obbligatorio indossare occhiali protettivi
Tragen Sie immer die Schutzbrille wenn Sie die Fräser benutzen
Toujours porter les lunettes de securité en utilisant les limes rotatives
Para usar las limas rotativas es obligatorio usar gafas de protección
При работе с борфрезами всегда используйте защитные очки
M MPC MNF
Carbide Burrs
708
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
ALU
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
UH
HSS/CO-HSSP
END MILLS
CARBIDE
BURRS
h stock standard f non-standard stock m stock exhaustion
D d (3) d (6) l L ANGLE PACKAGING EDP No. Stock EDP No. Stock EDP No. Stock
3.0 3 6 38 5 SF41M hSF41MPC h
3.0 3 14 38 5 SF42M hSF42MPC h
3.0 6 12 50 5 SF11M hSF11MPC f
5.0 3 12.7 38 5 SF53M hSF53MPC h
6.0 6 18 50 5 SF1M hSF1MPC fSF1MNF f
6.3 3 12.7 45 5 SF51M hSF51MPC h
9.6 6 19 64 5 SF3M hSF3MPC fSF3MNF f
11.0 6 25 70 5 SF4M hSF4MPC f
12.7 6 19 65 5 SF13M fSF13MPC f
12.7 6 25 70 5 SF5M hSF5MPC fSF5MNF f
16.0 6 25 70 5 SF6M hSF6MPC fSF6MNF f
19.0 6 25 70 5 SF7M fSF7MPC f
SF OSAWA
NORM
Always wear goggles when using the rotary burrs
Per l’uso delle lime rotative è obbligatorio indossare occhiali protettivi
Tragen Sie immer die Schutzbrille wenn Sie die Fräser benutzen
Toujours porter les lunettes de securité en utilisant les limes rotatives
Para usar las limas rotativas es obligatorio usar gafas de protección
При работе с борфрезами всегда используйте защитные очки
M MPC MNF
Carbide Burrs
709
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
ALU
MEF
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
UH
HSS/CO-HSSP
END MILLS
CARBIDE
BURRS
h stock standard f non-standard stock m stock exhaustion
D d (3) d (6) l L ANGLE PACKAGING EDP No. Stock EDP No. Stock EDP No. Stock
3.0 3 6 38 5 SG41M hSG41MPC h
3.0 3 10 38 5 SG43M hSG43MPC h
3.0 3 14 38 5 SG44M hSG44MPC h
5.0 3 12.7 38 5 SG53M hSG53MPC h
6.0 6 18 50 5 SG1M hSG1MPC f
6.3 3 12.7 45 5 SG51M hSG51MPC h
8.0 6 19 64 5 SG2M hSG2MPC f
9.5 6 19 64 5 SG3M hSG3MPC f
12.7 6 19 64 5 SG13M fSG13MPC f
12.7 6 25 70 5 SG5M hSG5MPC f
16.0 6 25 70 5 SG6M hSG6MPC f
19.0 6 25 70 5 SG7M hSG7MPC f
19.0 6 38 83 5 SG15M fSG15MPC f
SG OSAWA
NORM
Always wear goggles when using the rotary burrs
Per l’uso delle lime rotative è obbligatorio indossare occhiali protettivi
Tragen Sie immer die Schutzbrille wenn Sie die Fräser benutzen
Toujours porter les lunettes de securité en utilisant les limes rotatives
Para usar las limas rotativas es obligatorio usar gafas de protección
При работе с борфрезами всегда используйте защитные очки
M MPC MNF
Carbide Burrs
710
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
ALU
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
UH
HSS/CO-HSSP
END MILLS
CARBIDE
BURRS
h stock standard f non-standard stock m stock exhaustion
D d (3) d (6) l L ANGLE PACKAGING EDP No. Stock EDP No. Stock EDP No. Stock
3.0 3 6 38 5 SH41M hSH41MPC h
5.0 3 9.5 38 5 SH53M hSH53MPC h
8.0 6 19 64 5 SH2M hSH2MPC f
12.7 6 32 77 5 SH5M hSH5MPC f
16.0 6 36 80 5 SH6M fSH6MPC f
SH OSAWA
NORM
Always wear goggles when using the rotary burrs
Per l’uso delle lime rotative è obbligatorio indossare occhiali protettivi
Tragen Sie immer die Schutzbrille wenn Sie die Fräser benutzen
Toujours porter les lunettes de securité en utilisant les limes rotatives
Para usar las limas rotativas es obligatorio usar gafas de protección
При работе с борфрезами всегда используйте защитные очки
M MPC MNF
Carbide Burrs
711
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
ALU
MEF
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
UH
HSS/CO-HSSP
END MILLS
CARBIDE
BURRS
h stock standard f non-standard stock m stock exhaustion
D d (3) d (6) l L ANGLE PACKAGING EDP No. Stock EDP No. Stock EDP No. Stock
3.0 3 2.5 38 60° 5 SJ42M hSJ42MPC h
6.0 6 4 50 60° 5 SJ1M fSJ1MPC f
9.5 6 8 56 60° 5 SJ3M hSJ3MPC f
12.7 6 11 59 60° 5 SJ5M hSJ5MPC f
16.0 6 14.5 63 60° 5 SJ6M fSJ6MPC f
19.0 6 17.5 65 60° 5 SJ7M fSJ7MPC f
25.0 6 24.5 70 60° 5 SJ9M fSJ9MPC f
SJ OSAWA
NORM
Always wear goggles when using the rotary burrs
Per l’uso delle lime rotative è obbligatorio indossare occhiali protettivi
Tragen Sie immer die Schutzbrille wenn Sie die Fräser benutzen
Toujours porter les lunettes de securité en utilisant les limes rotatives
Para usar las limas rotativas es obligatorio usar gafas de protección
При работе с борфрезами всегда используйте защитные очки
M MPC MNF
Carbide Burrs
712
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
ALU
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
UH
HSS/CO-HSSP
END MILLS
CARBIDE
BURRS
h stock standard f non-standard stock m stock exhaustion
D d (3) d (6) l L ANGLE PACKAGING EDP No. Stock EDP No. Stock EDP No. Stock
3.0 3 1.5 38 90° 5 SK42M hSK42MPC h
6.0 6 3 50 90° 5 SK1M hSK1MPC f
9.5 6 4.7 53 90° 5 SK3M hSK3MPC f
12.7 6 6.3 55 90° 5 SK5M hSK5MPC f
16.0 6 8 57 90° 5 SK6M hSK6MPC f
19.0 6 9.5 59 90° 5 SK7M fSK7MPC f
25.0 6 12.7 60 90° 5 SK9M fSK9MPC f
SK OSAWA
NORM
Always wear goggles when using the rotary burrs
Per l’uso delle lime rotative è obbligatorio indossare occhiali protettivi
Tragen Sie immer die Schutzbrille wenn Sie die Fräser benutzen
Toujours porter les lunettes de securité en utilisant les limes rotatives
Para usar las limas rotativas es obligatorio usar gafas de protección
При работе с борфрезами всегда используйте защитные очки
M MPC MNF
Carbide Burrs
713
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
ALU
MEF
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
UH
HSS/CO-HSSP
END MILLS
CARBIDE
BURRS
h stock standard f non-standard stock m stock exhaustion
D d (3) d (6) l L ANGLE PACKAGING EDP No. Stock EDP No. Stock EDP No. Stock
3.0 3 10 38 10° 5 SL41M hSL41MPC h
3.0 3 14 38 8° 5 SL42M hSL42MPC h
5.0 3 12.7 38 14° 5 SL53M hSL53MPC h
6.0 6 18 50 14° 5 SL1M hSL1MPC f
8.0 6 25.4 70 14° 5 SL2M hSL2MPC f
9.6 6 30.2 76 14° 5 SL3M hSL3MPC fSL3MNF f
12.7 6 32 77 14° 5 SL4M hSL4MPC fSL4MNF f
16.0 6 33.3 78 14° 5 SL5M hSL5MPC fSL5MNF f
19.0 6 41.3 86 14° 5 SL7M fSL7MPC f
SL OSAWA
NORM
Always wear goggles when using the rotary burrs
Per l’uso delle lime rotative è obbligatorio indossare occhiali protettivi
Tragen Sie immer die Schutzbrille wenn Sie die Fräser benutzen
Toujours porter les lunettes de securité en utilisant les limes rotatives
Para usar las limas rotativas es obligatorio usar gafas de protección
При работе с борфрезами всегда используйте защитные очки
M MPC MNF
Carbide Burrs
714
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
ALU
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
UH
HSS/CO-HSSP
END MILLS
CARBIDE
BURRS
h stock standard f non-standard stock m stock exhaustion
D d (3) d (6) l L ANGLE PACKAGING EDP No. Stock EDP No. Stock EDP No. Stock
3.0 3 8 38 18° 5 SM41M hSM41MPC h
3.0 3 11 38 14° 5 SM42M hSM42MPC h
3.0 3 15 38 10° 5 SM43M hSM43MPC h
6.0 6 12.7 50 22° 5 SM1M hSM1MPC f
6.0 6 20 50 14° 5 SM2M hSM2MPC f
6.0 6 25 50 10° 5 SM3M hSM3MPC f
6.3 3 12.7 51 22° 5 SM51M hSM51MPC h
9.5 6 16 64 28° 5 SM4M hSM4MPC f
12.7 6 22 71 28° 5 SM5M hSM5MPC f
16.0 6 25 74 31° 5 SM6M hSM6MPC f
SM OSAWA
NORM
Always wear goggles when using the rotary burrs
Per l’uso delle lime rotative è obbligatorio indossare occhiali protettivi
Tragen Sie immer die Schutzbrille wenn Sie die Fräser benutzen
Toujours porter les lunettes de securité en utilisant les limes rotatives
Para usar las limas rotativas es obligatorio usar gafas de protección
При работе с борфрезами всегда используйте защитные очки
M MPC MNF
Carbide Burrs
715
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
ALU
MEF
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEX
UH
HSS/CO-HSSP
END MILLS
CARBIDE
BURRS
h stock standard f non-standard stock m stock exhaustion
D d (3) d (6) l L ANGLE PACKAGING EDP No. Stock EDP No. Stock EDP No. Stock
3.0 3 4 38 10° 5 SN42M hSN42MPC h
6.0 6 8 50 10° 5 SN1M hSN1MPC f
6.3 3 6 39 12° 5 SN51M fSN51MPC f
9.5 6 9.5 55 13° 5 SN2M hSN2MPC f
12.7 6 12.7 58 28° 5 SN4M hSN4MPC f
16.0 6 19 64 18° 5 SN6M fSN6MPC f
19.0 6 16 61 30° 5 SN7M fSN7MPC f
SN OSAWA
NORM
Always wear goggles when using the rotary burrs
Per l’uso delle lime rotative è obbligatorio indossare occhiali protettivi
Tragen Sie immer die Schutzbrille wenn Sie die Fräser benutzen
Toujours porter les lunettes de securité en utilisant les limes rotatives
Para usar las limas rotativas es obligatorio usar gafas de protección
При работе с борфрезами всегда используйте защитные очки
M MPC MNF
Carbide Burrs
716
TYPHOON
PU-HPU
INFO
TYPHOON
SUH
TYPHOON
ALH
TYPHOON
HRC
TYPHOON
SUH MINI
C-SD-TA
LFTA
SUTA
HF VH/UP
ALU
TYPHOON
TA-HTA-4HTA
TYPHOON
HL
HSS-HSS/CO
DRILLS
G2
MDTA
MEF
MEX
UH
HSS/CO-HSSP
END MILLS
CARBIDE
BURRS
BUR10 M TYPE
Set 10pcs. - shank Ø6 mm
SA1 - SB1 - SC1 - SD1 - SE1 - SF1 - SG1 - SL1 - SM1 - SN1
A15FW MPC TYPE
Set 15pcs. - shank Ø3 mm
SA41 - SA42 - SA43 - SA52 - SB43 -
SC42 - SD41 - SD42 - SD53 - SE41 -
SG43 - SL42 - SM42 - SM43 - SN42
A16FW M TYPE
Set 15pcs. - shank Ø3 mm
SA41 - SA42 - SA43 - SA52 - SB43 - SC42 - SD41
SD42 - SD53 - SE41 - SG43 - SL42 - SM42 - SM43 - SN42
M
MMPC
Sorma S.p.A. / © Copyright 2017. All rights reserved.
This publication may not be reprinted in whole or part without our express permission. All right reserved. No rights may be derived from any errors in content or from typographical or typesetting errors. Diagrams,
features and dimensions represent the current status on the date of issue of this catalog. We reserve the right to make technical changes. The visual appearance of the products may not necessarily correspond to the
actual appearance in all cases or in every detail.
www.osawa.it
Sorma S.p.a. / Via Don F. Tosatto 8 / 30174 Mestre Venezia - ITALY / t. +39 041.959179 / f. +39 02.57760374 / info@sorma.net / www.sorma.net
CO_OSAWA 2018.indd 1 25/09/17 11:49
