2017 Master Catalogue
_WID_Master16_Covers_Metric_52mm.indd 1 12/17/15 11:51 AM
For more than 90 years, WIDIA™ brand products and services
have defi ned excellence in innovation, technology, and
customer service.
From turning, indexable milling, solid end milling, holemaking,
tapping, and tooling systems — WIDIA offers a broad range
of solutions, all delivered from a single source. Match the
most expansive portfolio of precision-engineered products
and engineered solution services available today with a
global, specialised network of Authorised Distributor partners,
and you have the tools you need — and the power that only
comes from WIDIA.
_WID_Master16_Covers_Metric_52mm.indd 2 12/17/15 11:51 AM
i
widia.com
LViWID M 16 MAIN INTRO 001 M i N b 23 2015 7 48 AM
Table of Contents
Introduction ................................................................................................................................................................ii–v
Services and Support ............................................................................................................................................ vi–viii
Stationary Tools
Turning ......................................................................................................................................................... A1–F101
Turning Introduction ..................................................................................................................................A2–A7
Turning ISO Inserts ...............................................................................................................................B1–B218
Tools for External Turning and Internal Boring .................................................................................... C1–C129
Tools for Small Hole Boring ....................................................................................................................D1–D91
Grooving and Cut-Off ............................................................................................................................ E1–E133
Threading .............................................................................................................................................. F1–F101
Rotating Tools
Indexable Milling ........................................................................................................................................G1–M130
Indexable Milling Introduction ................................................................................................................ G2–G19
Face Mills ............................................................................................................................................... H1–H74
Chamfer Mills .............................................................................................................................................I1–I10
90° Shoulder Mills ....................................................................................................................................J1–J51
Helical Mills ...............................................................................................................................................K1–K9
Slotting Mills .............................................................................................................................................L1–L33
Copy Mills ........................................................................................................................................... M1–M130
Solid End Milling .......................................................................................................................................... N1–R18
Solid End Milling Introduction ................................................................................................................ N2–N21
High-Performance Solid Carbide End Mills ......................................................................................... O1–O212
General Purpose Solid Carbide End Mills ...............................................................................................P1–P44
High-Performance High-Speed Steel (HSS-E/PM) ................................................................................ Q1–Q13
Burs .........................................................................................................................................................R1–R18
Holemaking ..................................................................................................................................................S1–W81
Holemaking Introduction ...........................................................................................................................S2–S8
Solid Carbide Drills ................................................................................................................................ T1–T149
Modular Drills ......................................................................................................................................... U1–U45
Indexable Drills ........................................................................................................................................ V1–V40
Hole Finishing ........................................................................................................................................W1–W81
Tapping ........................................................................................................................................................X1–Y115
Tapping Introduction ................................................................................................................................. X2–X9
Tapping Portfolio ...................................................................................................................................Y1–Y115
Ordering Information ........................................................................................................................................Z2–Z151
Index by Order Number .................................................................................................................................. Z2–Z75
Index by Catalogue Number ....................................................................................................................... Z76–Z145
Global Contacts ........................................................................................................................................ Z146–Z147
Icon Legend .............................................................................................................................................. Z148–Z150
Material Overview ............................................................................................................................................... Z151
WID_Master16_MAIN INTRO_001_Metric.indd 1 11/23/15 7:51 AM
A Powerful History
of High Performance
For more than 90 years, WIDIA™ brand products and services have defi ned
excellence in innovation, technology, and customer service. From the world’s
fi rst patent for carbide indexable inserts to the development of the world’s fi rst
coated grades, WIDIA delivers extreme results, no matter what the challenge.
From turning, indexable milling, solid end milling, holemaking, tapping, and
tooling systems — WIDIA offers a broad range of solutions. Match the most
expansive portfolio of precision-engineered products and engineered solution
services available today with a global, specialized network of Authorised
Distributor partners, and you have the tools you need — and the power that
only comes from WIDIA.
Launch of
fi rst global
coated grade
1926
Tungsten carbide
production begins
1937
WIDIA™ wins the
Grand Prix at the
world exposition
in Paris 1962
First patent
granted for coated
carbide inserts
1967
WIDIA (India)
begins producing
carbide and tools
1968
ii
WID_Master16_MAIN INTRO_002_003_Metric.indd 2 11/11/15 9:15 AM
1982
Launch of first
PVD TiN coated
taps (VTD)
1987
Launch of the
Widaflex™ tooling
system for turning,
holemaking, and
milling 2000
QS 9000 TES and
VDA 6.4 certification
for the WIDIA
operations in Germany
2009
The WIDIA, Hanita, Greenfield
Tap & Die, Circle, ClappDiCo,
Manchester, Metal Removal,
Metcut, and Rübig brands
combine to create the
WIDIA Products Group
2011
Launch
KM™ and
ERICKSON™
Portfolio
2013
Launch of new
VariTap™ series
2016
WIDIA celebrates
90 years
WID_Master16_MAIN INTRO_002_003_Metric.indd 3 11/11/15 9:15 AM
NOVO KNOWS
ART TO PART TO PROFIT
Being as productive and profi table as
possible is your fundamental goal. With
the addition of NOVO™ to your team, your
goal can be achieved. NOVO possesses
powerful digital tools that link together
process planning, inventory availability
and purchase, cost-per-part management,
and productivity improvements.
NOVO can ensure you have the right tools
on your machines, in the right sequence.
Resulting in fl awless execution that
accelerates every job, and maximises
every shift.
WID_Master16_MAIN INTRO_004_005_Metric.indd 4 11/2/15 2:56 PM
WID_Master16_MAIN INTRO_004_005_Metric.indd 5 11/2/15 2:56 PM
Language Version: WID_Master16_MAIN INTRO_006_007_Metric December 21, 2015 9:21 AM
NOVO™ possesses powerful digital tools that link together process
planning, inventory availability and purchase, cost-per-part management,
and productivity improvements.
NOVO™
WIDIA™ Customer Application Engineers assist customers and engineering
groups throughout the world with expert tool selection and application
recommendations for the entire range of WIDIA tooling.
Customer Application Support
ToolBOSS™ Vending Solution
ToolBOSS vending solutions help to reduce costs and improve efficiencies
to give you a competitive edge.
See pages M131 and U9 to learn more.
See pages D92–D93, H61, S9, and Y57 to learn more.
See pages D75, L15, and W67 to learn more.
CAS
vi
WIDIA™ Metalworking Services
WIDIA™ provides an array of products and support services from onsite tool management and engineering
personnel, to inventory control systems, to tool manufacturing, reconditioning, and recycling to support tools
and their processes throughout their entire lifecycle. Our metalworking services are designed to save your
business time, money, and inventory, and protect your cutting tool investment for the long term.
Let WIDIA help you extend the life of your tools and maintain their performance in delivering productivity.
Contact your local authorised WIDIA distributor or visit widia.com/services to learn more.
Language Version: WID_Master16_MAIN INTRO_006_007_Metric December 21, 2015 9:21 AM
vii
Language Version: WID_Master16_MAIN INTRO_006_007_Metric December 21, 2015 9:21 AM
When your WIDIA™ advanced tooling products need to be serviced, the
WIDIA Service and Repair Department has the highly trained staff to
provide expert assistance.
Toolholder Service and Repair
The WIDIA™ Carbide Recycling Programme can turn accumulated scrap
carbide tooling in your shop into cash.
Carbide Recycling
Tool Reconditioning
WIDIA Reconditioning Services optimise the value of metalcutting tools
throughout their entire lifecycle by giving like-new performance — with
rapid turnaround time — so tools are always on hand and perform just
like new.
The Knowledge Center offers several ways to get trained. In-person
classes include lecture, lab, and machining demonstrations.
We have Machine Tool Industry (MTI) specialists in more than 60 countries around
the world, so there’s always someone near you: W-MTI.Solutions@WIDIA.com.
Knowledge Center
WIDIA and the Machine Tool Industry (MTI)
See pages I11, N22–N23, T140–T141, V42–V43, and Y87 to learn more.
See page M71 to learn more.
See pages R19 and T97 to learn more.
See pages L31 and U39 to learn more.
See page O216–O217 to learn more.
CENTER
KNOWLEDGE
WIDIA™ Metalworking Services
viii
LViWID M 16 MAIN INTRO 008 009 M i N b 20 2015 7 13 AM
widia.com
WIDIA™ Customer Application Engineers assist customers and engineering groups throughout the world
with expert tool selection and application recommendations for the entire range of WIDIA tooling.
Easy access to proven metalworking expertise!
ORIGINATING
COUNTRY LANGUAGE TEL FAX EMAIL
Australia English +61 001 724 539 6921 * 001 724 539 6830 * ap.techsupport@widia.com
Austria German 0800 291630 0049 911 9735 429* eu.techsupport@widia.com
Belgium English / French 0800 80410 0049 911 9735 429* eu.techsupport@widia.com
China Chinese +86 400 889 2237 +86 21 58999985 * w-cn.techsupport@widia.com
Denmark English +45 808 89295 001 724 539 6830 * na.techsupport@widia.com
Finland English 0800 919413 001 724 539 6830 * na.techsupport@widia.com
France Frensh +33 080 5540 379 0049 911 9735 429* eu.techsupport@widia.com
Germany German 0800 1015774 0911 9735 429* eu.techsupport@widia.com
India English +91 001 724539 6921 * 001 724 539 6830 * ap.techsupport@widia.com
Israel English +972 1809 449907 001 724 539 6830 * na.techsupport@widia.com
Italy Italian 800 916568 02 89512146 * eu.techsupport@widia.com
Japan English +81 001 724539 6921 * 001 724 539 6830 * ap.techsupport@widia.com
Korea (South) English +82 001 724539 6921 * 001 724 539 6830 * ap.techsupport@widia.com
Malaysia English +60 001 724539 6921 * 001 724 539 6830 * ap.techsupport@widia.com
Netherlands English 0800 0201131 001 724 539 6830 * na.techsupport@widia.com
New Zealand English +64 001 724539 6921 * 001 724 539 6830 * ap.techsupport@widia.com
Norway English 800 10081 001 724 539 6830 * na.techsupport@widia.com
Poland Polish 00800 4411943 06166 56504* eu.techsupport@widia.com
Russia (landline) Russian +7 8800 5556395 0048 6166 56504* eu.techsupport@widia.com
Russia (cell phone) Russian +7 8005556395 0048 6166 56504* eu.techsupport@widia.com
Singapore English +65 001 724539 6921 * 001 724 539 6830 * ap.techsupport@widia.com
South Africa English +27 0800 981644 001 724 539 6830 * na.techsupport@widia.com
Sweden English +46 020798794 001 724 539 6830 * na.techsupport@widia.com
Taiwan English +886 001 724539 6921 * 001 724 539 6830 * ap.techsupport@widia.com
Thailand English +66 001 724539 6921 * 001 724 539 6830 * ap.techsupport@widia.com
United Kingdom English +44 0800 028 2996 001 724 539 6830 * na.techsupport@widia.com
Ukraine Russian +380 0800502665 0048 6166 56504* eu.techsupport@widia.com
USA English 888 539 5145 001 724 539 6830 * na.techsupport@widia.com
Service Level Excellence:
• Fast telephone response.
• Quick technical solutions.
• Effi cient case management.
Services Provided:
• Tooling selection.
• Operating parameters.
• Troubleshooting.
• Process optimisation.
•
Hardware support.
Best-in-Class Support Tools
and Technology:
• Tooling performance experts.
• Materials database.
• Application calculators.
• Easy access to proven metalworking expertise.
• Service level excellence.
• Best-in-class application support tools and technology.
*Noted phone and fax numbers are not toll free.
Customer Application Support (CAS)
Get fast and reliable answers to your toughest metalcutting problems.
Our Customer Application Support (CAS) Team is the metalworking industry’s leading help desk resource
for tooling application solutions and problem resolution.
WID_Master16_MAIN INTRO_008_009_Metric.indd 8 11/20/15 7:13 AM
• Find a local WIDIA™ Authorised Distributor near you.
• Contact our Customer Application Support team for technical support
and product recommendations.
• Log in to NOVO™ for instant access to inventory availability, application
recommendations, CAD drawings, and 3D models.
• Purchase WIDIA-branded merchandise.
• Get social with us on Facebook, Twitter, Instagram, YouTube, and more!
Visit our homepage at widia.com to:
You can also use our NOVO app to guide you to the
correct choice!
For more information, please visit widia.com/novo.
NOVO: The Digital Source for Delivering
Smart Machining Solutions
For more information, contact your local WIDIA
Authorized Distributor or visit widia.com/services.
On the Web
We are here to serve you.
WID_Master16_MAIN INTRO_008_009_Metric.indd 9 11/20/15 7:13 AM
LViWID M 16 T i A000 A001 M i REBRAND O b 26 2015 8 21 AM
WID_Master16_Turning_A000_A001_Metric_REBRAND.indd 1 10/30/15 2:29 PM
A1
LViWID M 16 T i A000 A001 M i REBRANDO b 26 20158 21AM
widia.com
Turning
Turning Introduction ............................................................................................................................................... A2–A7
Turning ISO Inserts ............................................................................................................................................. B1–B218
Tools for External Turning and Internal Boring ................................................................................................C1–C129
Tools for Small Hole Boring..................................................................................................................................D1–D91
Grooving and Cut-Off .......................................................................................................................................... E1–E133
Threading ..............................................................................................................................................................F1–F101
WID_Master16_Turning_A000_A001_Metric_REBRAND.indd 1 10/30/15 2:29 PM
A2
LViWID M 16 T i A002 A003 M i REBRAND D b 2 2015 1 00 PM
widia.com
-FS Geometry
With three geometries and three grades, WIDIA Victory has a complete portfolio for high-temp turning applications
in nickel-based (INCONEL®, Udimet®, Rene), cobalt-based (Haynes®), and Fe-based (Airmet 100) materials,
as well as diffi cult-to-machine stainless (460SS, duplex, high-alloy stainless), cobalt-chrome, and stainless-based
powdered metals. These materials are commonly found in rings, housings, hubs, compressors, fans, rotors,
and medical devices.
The -FS Geometry is a ground, highly-positive design best used
in fi nishing cuts where size control, fi nish, and minimisation of
part defl ection are considerations.
• Excellent chip control versus similar competitive
geometries. This chip control adds process stability
and reduces machine stoppages to remove stringers.
• Increased cutting speed and/or feed rate for better chip
control to reduce cycle time, gain productivity, and reduce
machining cost.
• Reduced cutting forces provide longer tool life and/or
better surface fi nish.
• Improved depth-of-cut (DOC) notching resistance
for longer tool life.
• Advanced PVD grades provide more wear resistance
and longer tool life.
WIDIA™ Victory™ High-Temp Turning
Turning Product Highlights
WID_Master16_Turning_A002_A003_Metric_REBRAND.indd 2 12/2/15 2:48 PM
A3
LViWID M 16 T i A002 A003 M i REBRANDD b 2 20152 48PM
widia.com
-UR Geometry -MS Geometry
-MS geometry is a moulded geometry with
increased edge toughness that is best used
in medium machining.
• The -MS geometry offers excellent chip control versus
similar competitive geometries. This chip control adds
process stability and reduces machine stoppages to
remove stringers.
• Available in two PVD grades, -MS is a high-
performance geometry. Compete with confi dence
against any competitor. The -MS is also available
in an uncoated grade.
• The WIDIA™ Victory™ grades offer better
depth-of-cut (DOC) notching resistance and
improved edge toughness. This offers customers
an improved solution from other competitors.
• -UR geometry offers a roughing solution for high-temp
materials. Available in WS10PT™ and WS25PT™, the
-UR geometry provides smooth chip forming and improved
coolant fl ow for increased tool life. This positive geometry,
with its unique chipbreaker without infl ection points,
reduces cutting forces and improves depth-of-cut (DOC)
notching resistance.
WID_Master16_Turning_A002_A003_Metric_REBRAND.indd 3 12/2/15 2:49 PM
A4 widia.com
WMT™ System
The WMT platform is the economical and reliable option for all grooving, face grooving, cut-off, turning,
and profi ling applications. The WMT system ensures precise insert positioning and provides only the
most accurate machining, with exceptionally fast cycle times and superior performance.
The WMT portfolio offers:
• Proven higher stability.
– WMT insert design has the best clamping system
for stability.
• Platform fl exibility, with multiple geometries in single holder
for multiple application types.
• Victory™ grades:
– WU10HT™ — Uncoated
– WU10PT, WU25PT — PVD
– WP10CT, WP10CT — CVD
• Greater depth-of-cut (DOC) capability.
Versatile and Well Constructed
• Specifi cally designed to increase speeds
and feeds.
• Excellent geometry for even the most demanding
deep grooving applications.
• The WMT system enables heavy stock removal
in turning applications.
• Ensures fi ner surface fi nishes and a long,
reliable tool life.
WIDIA™ VariTurn™
Formerly known as WIDIA Value, the WIDIA VariTurn platform offers high-performance inserts with
versatility. With eight grades and eight geometries, VariTurn covers 80% of all turning applications.
Every insert is gold, which exposes wear as the tool continues to be used. This makes it easy to detect
when an insert is ready to be changed, maximising the product’s value and protecting the workpiece.
Also, because WIDIA VariTurn inserts can be used in most applications, a single insert can take on any
number of tasks, thus reducing inventory. WIDIA VariTurn products are reliable enough to cut steel,
stainless steel, cast iron, and high-temperature alloys, enabling quick changes in workpiece materials
without the need to swap inserts, saving time and money.
Turning Product Highlights
widia.com
WID_Master16_Turning_A004_A005_Metric_REBRAND.indd 4 12/2/15 2:50 PM
A5
widia.com
WIDIA™ Tools for Small Hole Boring
• Versatile and engineered to give exceptional
performance for I.D. machining applications.
Quick, accurate insert indexing.
• Internal coolant can be used with all tool bodies.
Cutting inserts have special slots that direct
coolant to the cutting edge.
• Carbide grades for steels, stainless steels,
non-ferrous materials, super alloys, titanium,
and hard materials.
A/B Series Tooling
• Inserts repeat within ±0,013mm, allowing quick
and accurate setups.
• Elliptical, ground insert shanks allow for maximum
strength and rigidity.
• Available in boring, grooving, threading, and profi ling
insert styles.
• Coated and uncoated carbide grades and cubic boron
nitride/polycrystalline diamond-tipped inserts to support
all machining applications.
When the application calls for boring at a D min of less than 35mm, WIDIA offers
comprehensive and easy solutions to choose from. Our portfolio of tools for small hole boring
offer solutions in either indexable inserts or solid carbide inserts, and inserts are available for
boring, profi ling, threading, and grooving.
I.D. Indexable Tooling
• Steel and solid carbide shanks with through coolant
in inch and metric sizes.
• Ground-in and pressed-type chipbreaker inserts.
• Coated and uncoated carbide grades and cubic boron
nitride/polycrystalline diamond-tipped inserts to support
all machining applications.
Quadralock™ System
WID_Master16_Turning_A004_A005_Metric_REBRAND.indd 5 12/2/15 2:50 PM
A6
LViWID M 16 T i A006 A007 M i REBRAND N b 25 2015 12 02 PM
widia.com
Turning
Insert Selection Reference Guide Tool
ISO Turning Inserts
Threading, Grooving, and Cut-Off
WIDIA
™
Turning Solutions
LT TopThread
™
WMT
™
TopGroove
™
Separator
™
ProGroove
™
inserts F42–F68 F8–F22 E12–E26 E48–E72 E112–E121 E94–E101
toolholders F69–F77 F23–F35 E28–E39 E73–E79 E122–E128 E102–E104
Carbide Inserts,
Negative
Carbide Inserts,
Positive
Ceramic
Inserts
PcBN/PCD
Inserts
CRhomboid
80° B35–B45 B30–B34
B45–B46 B179–B181 B197–B203
DRhomboid
55° B51–B63 B47–B50
B63–B64 B182–B183 B206–B210
RRound B67 B65–B66 B184–B186 B210
SSquare
90° B70–B77 B68–B70
B78–B80 B187–B192 B210–B212
TTriangular
60° B83–B91 B91–B93 B193–B195 B212–B215
VRhomboid
35° B95–B99 B94–B95 B196 B216–B218
W
Trigon
80°
with enlarged
corner angles
B99–B105 B105 B196 B218
Step 1 • Select Insert Style
Inserts to Machine Aluminium VariTurn
™
Tools for Small Hole Boring
inserts B150–B157 B106–B149 D2–D91
WID_Master16_Turning_A006_A007_Metric_REBRAND.indd 6 11/25/15 12:03 PM
A7
LViWID M 16 T i A006 A007 M i REBRANDN b 25 201512 03PM
widia.com
D-Style
Clamping
P-Style
Clamping
Negative
C-Style Clamping
S-Style
Clamping
Positive
C-Style Clamping
CRhomboid
80°
conventional
C8–C10 C20–C22 C31–C32 C42–C43 –
DRhomboid
55° C11 C23–C24 C32–C33 C43–C42 –
RRound conventional C12 –C35 –C40–C41
SSquare
90° conventional C12–C14 C25–C27 C36–C37 C45 –
TTriangular
60° conventional C15 C28–C29 C37–C39 C46–C47 –
VRhomboid
35° conventional C16–C17 ––
C48 –
W
Trigon
80°
with enlarged
corner angles
conventional C19 C30 –C48–C49 –
External Machining
Step 2 • Select Application and Clamping System
D-Style
Clamping
P-Style
Clamping
Negative
C-Style Clamping
S-Style
Clamping
Positive
C-Style Clamping
CRhomboid
80°
conventional
C56 C60 C62 C66–C70 –
DRhomboid
55° C56–C57 – C63 C71–C76 –
RRound conventional – – – – –
SSquare
90° conventional – – C63–C64 – –
TTriangular
60° conventional C58 C60 – C77–C80 C65
VRhomboid
35° conventional C58 – – C80–C81 –
W
Trigon
80°
with enlarged
corner angles
conventional C59 C61 C64 – –
Internal Machining
Turning
Insert Selection Reference Guide Tool
WID_Master16_Turning_A006_A007_Metric_REBRAND.indd 7 11/25/15 12:03 PM
LViWID M 16 T i I B000 B001 M i REBRAND D b 14 2015 2 38 PM
WID_Master16_Turning_Inserts_B000_B001_Metric_REBRAND.indd 1 12/14/15 2:42 PM
widia.com B1
LViWID M 16 T i I B000 B001 M i REBRANDD b 14 20152 38PM
WIDIA Victory High-Performance Inserts ......................................................................................................B2–B105
WIDIA VariTurn .............................................................................................................................................B106–B149
Inserts for Machining Aluminium ................................................................................................................B150–B157
Ceramic, PcBN, and PCD Inserts................................................................................................................B158–B218
Turning • ISO Inserts
WID_Master16_Turning_Inserts_B000_B001_Metric_REBRAND.indd 1 12/14/15 2:42 PM
widia.com
B2
LViWID M 16 T i I B002 B003 M i REBRAND N b 11 2015 10 01 AM
Steel and Stainless Steel Grades
• Reduced cycle times — high speed and feed capability.
• Long tool life — new multilayer coating provides better wear resistance.
• Proven seating — smooth and secure seating surface.
• Outer layer is bronze-colored for easier wear detection.
Post-coat treatment
• Improves edge toughness.
• Long, predictable tool life.
• Reduces depth-of-cut notching.
• Wide range of applications.
Improved edge toughness
• Provides smooth outer surface to reduce
forces, friction, and workpiece sticking.
Post-coat grinding
• Provides secure seating surface.
Alpha aluminia layer
• Provides coating integrity at
elevated speeds.
• Higher productivity and dependability
at high cutting temperatures.
New geometry
identifi cation system.
MT-CVD/CVD–TiN-TiCN-
AI2O3-ZrCN
Victory
A Complete High-Performance Turning Portfolio •
WIDIA™ Victory™
• Market-leading technology.
• Longer tool life.
• Higher productivity through increased speed capability.
Specifi cally engineered multilayer coating provides high-speed
capability for fi nishing to roughing operations. New geometries
enhance chip control for better tool life and superior surface fi nshes.
WID_Master16_Turning_Inserts_B002_B003_Metric_REBRAND.indd 2 11/11/15 5:36 PM
widia.com B3
LViWID M 16 T i I B002 B003 M i REBRANDN b 11 201510 01AM
WIDIA™ Inserts
New WIDIA™ Victory™ grades and geometries are designed to offer better tool life and surface fi nishes.
..MG-MS Geometry
..GG-FS Geometry
• All ..GG-FS inserts are G tolerance inserts. This is a
critical feature in some applications, especially the
aerospace industry.
• Reduced cycle times — high speed and feed capability.
• Reduced cutting forces — improved dimensional control
and reduced defl ections.
• New chip forming elements — better chip control.
• Long tool life — new multilayer coating provides better
wear resistance.
• Proven seating — smooth and secure seating surface.
High rake to allow smooth chip fl ow.
Precision ground provides high cutting
edge quality to reduce depth-of-cut
notching and provide consistency in
component dimensions.
Proprietary nose geometry
for better chipbreaking under
medium parameters.
• High positive rake angle delivers improved tool life by reducing cutting
forces and built-up edge when machining high-temp alloys.
• Improved chip control and reduced crater wear due to proprietary
chipbreakers with varying shapes and distances.
• Reduced thermal wear and cracking due to near sharp cutting edge
with optimised edge treatment.
• Improved chipbreaking at various depths of cut due to variable land
width, which improves impact strength.
• All MG-MS inserts are moulded, which supports increased tool life
due to the elimination of grinding stress.
High rake to allow smooth chip fl ow.
Variable land width to provide good
impact strength and low wear.
Proprietary nose geometry
for better chipbreaking under
medium parameters.
WID_Master16_Turning_Inserts_B002_B003_Metric_REBRAND.indd 3 11/11/15 5:36 PM
B4
LViWID M 16 T i I B004 B005 M i REBRAND D b 10 2015 10 57 AM
widia.com
Catalogue Numbering System
CNMG120408UR
Each character in our catalogue number signi es a speci c
trait of that product. Use the following key columns and
corresponding images to easily identify which attributes apply.
How Do Catalogue Numbers Work?
CNMG12
Insert Shape Insert Clearance
Angle
Tolerance
Class
Insert
Features
Size
H
Hexagon
120°
A
Tolerances apply prior
to edge prep and coating
N
R
F
A
M
G
W
T
Q
U
B
H
C
J
RεRε
O
Octagon
135°
B
P
Pentagon
108°
C
R
Round
—
D
Rε
S
Square
90°
E
T
Triangular
60°
F
C
D
E
M
V
Rhomboid
80°
55°
75°
86°
35°
G
D = Theoretical diameter
of the insert inscribed
circle
S = Thickness
B = See gures below
X
V
Special
Design
W
Trigon
80°
with enlarged
corner angles
N
L
Rectangular
90°
P
A
B
N/K
Parallelogram
85°
82°
55°
O
Indicated for other
clearance angles
requiring descriptions.
Code for mm
cutting edge length
“L10”
“D”
mm C D R S T V W
3,97 S4 04 03 03 06 — —
4,76 04 05 04 04 08 08 S3
5,56 05 06 05 05 09 09 03
6,00 — — 06 — — — —
6,35 06 07 06 06 11 11 04
7,94 08 09 07 07 13 13 05
8,00 — — 08 — — — —
9,52 09 11 09 09 16 16 06
10,00 — — 10 — — — —
11,11 11 13 11 11 19 19 07
12,00 — — 12 — — — —
12,70 12 15 12 12 22 22 08
14,29 14 17 14 14 24 24 09
15,88 16 19 15 15 27 27 10
16,00 — — 16 — — — —
17,46 17 21 17 17 30 30 11
19,05 19 23 19 19 33 33 13
20,00 — — 20 — — — —
22,22 22 27 22 22 38 38 15
25,00 — — 25 — — — —
25,40 25 31 25 25 44 44 17
31,75 32 38 31 31 54 54 21
32,00 — — 32 — — — —
tolerance
class
tolerance
on “D”
tolerance
on “B”
tolerance
on “S”
C ±0,025 ±0,013 ±0,025
H ±0,013 ±0,013 ±0,025
E ±0,025 ±0,025 ±0,025
G ±0,025 ±0,025 ±0,013
M See tables on next page ±0,013
U See tables on next page ±0,013
WIDIA™ Inserts
WID_Master16_Turning_Inserts_B004_B005_Metric_REBRAND.indd 4 12/10/15 10:57 AM
B5
LViWID M 16 T i I B004 B005 M i REBRANDD b 10 201510 57AM
widia.com
WIDIA™ Inserts
Catalogue Numbering System
symbol thickness
mm mm
— 0,79
T0 1,00
01 1,59
T1 1,98
02 2,38
03 3,18
T3 3,97
04 4,76
05 5,56
06 6,35
07 7,94
9 9,52
11 11,11
12 12,70
CNMG120408UR
By referencing this easy-to-use guide, you can
identify the correct product to meet your needs.
symbol corner
radius
mm mm
X0 0,04
01 0,1
02 0,2
04 0,4
08 0,8
12 1,2
16 1,6
20 2,0
24 2,4
28 2,8
32 3,2
00
round
insert
M0
—
04 08 UR
Thickness
S
Corner
Radius “R¡”
Hand of Insert
(optional)
Cutting Edge
(optional)
Chipbreaker
(optional)
R
= Right hand
F
Sharp
L
= Left hand
E
Rounded
N
= Neutral
T
Chamfered
S
Chamfered
and Rounded
K
Double-
Chamfered
P
Double-
Chamfered
and Rounded
13
=
Railroad
Light
CT
=
Copy
Turning
FF
=
Fine
Finishing
FP
=
Finish
Positive
FW
=
Finish
Wiper
ML
=
Medium
Light
MR
=
Medium
Roughing
MW
=
Medium
Wiper
RH
=
Roughing
Heavy
T
=
Negative
Land
UF
=
Universal
Finishing
UM
=
Universal
Medium
UR
=
Universal
Roughing
.NMP
=
Sharp
Medium
MP
=
Medium
Positive
FS
=
Finishing
High-Temp(S)
MS
=
Medium
High-Temp(S)
MU
=
Medium
Universal
SR
=
Super
Roughing
65
=
Heavy
Roughing
± Tolerance on “D” ± Tolerance on “B”
Class M Tolerance Class U
Tolerance Class M Tolerance Class U
Tolerance
“D”
Shapes
S, T, C,
R, & W
Shape
D
Shape
V
Shapes
S, T, & C “D”
Shapes
S, T, C,
R, & W
Shape
D
Shape
V
Shapes
S, T, & C
mm mm mm mm mm mm mm mm mm mm
3,97 0,05 –––
3,97 0,08 –––
4,76 0,05 – – 0,08 4,76 0,08 – – 0,13
5,56 0,05 0,05 0,05 0,08 5,56 0,08 0,11 – 0,13
6,35 0,05 0,05 0,05 0,08 6,35 0,08 0,11 – 0,13
7,94 0,05 0,05 0,05 0,08 7,94 0,08 0,11 – 0,13
9,52 0,05 0,05 0,05 0,08 9,52 0,08 0,11 0,18 0,13
11,11 0,08 0,08 0,08 0,13 11,11 0,13 0,15 ––
12,70 0,08 0,08 0,08 0,13 12,70 0,13 0,15 0,25 0,20
14,29 0,08 0,08 0,08 0,13 14,29 0,13 0,15 ––
15,88 0,10 0,10 0,10 0,18 15,88 0,15 0,18 –0,27
17,46 0,10 0,10 0,10 0,18 17,46 0,15 0,18 – 0,27
19,05 0,10 0,10 0,10 0,18 19,05 0,15 0,18 – 0,27
22,22 0,13 – – 0,25 22,22 0,15 – –0,38
25,40 0,13 – – 0,25 25,40 0,18 – – 0,38
31,75 0,15 – – 0,25 31,75 0,20 – – 0,38
R
L
N
WID_Master16_Turning_Inserts_B004_B005_Metric_REBRAND.indd 5 12/10/15 10:57 AM
B6
LViWID M 16 T i I B006 B007 M i REBRAND O b 15 2015 9 19 AM
widia.com
WIDIA™ Victory™ • High-Performance Inserts
Grade Numbering System
A system of grades, geometries, and application guidelines to provide optimal solutions for your metalcutting
needs. It’s easy to determine which WIDIA™ chip-control cutting tool will work best in your speci c
workpiece materials and applications!
}
}
}
WP 15C T
Brand Primary
Workpiece
Material
Application
Range*
Insert Material Application
05 = ne nishing H
=
Uncoated Carbide T= Turning
10 = nishing C
=
Carbide + CVD M= Milling
15 =
medium to
roughing
P= Carbide + PVD H= Holemaking
20 =T
=
Cermet D= Solid Drills
25 =Y=Ceramics E= Solid End Mills
30 =roughing D=Diamond G= Taps
35 =B=PcBN R= Reamer
40 =
heaviest
roughing
S=HSS V= Thread Mills
45 =E=HSS-E
50 =M=HSS-E-PM
* Samples shown are based
on turning and will differ
within applications
PSteel
MStainless Steel
KCast Iron
NNon-Ferrous
SHigh-Temp Alloys
HHardened Materials
UUniversal Machining
WID_Master16_Turning_Inserts_B006_B007_Metric_REBRAND.indd 6 10/30/15 2:35 PM
B7
LViWID M 16 T i I B006 B007 M i REBRANDO b 15 20159 19AM
widia.com
WIDIA™ Inserts
Positive and Negative Inserts
WS Grades for
High-Temp Alloys
• Two grades for use in roughing
to nishing operations.
• Very good wear resistance for
longer tool life.
• One uncoated grade for use
in titanium.
WK Grades for Cast Iron
• Three grades across 12 geometries for
use in roughing to nishing operations.
• Very good balance of wear resistance
and toughness for long predictable tool
life. Flat top geometry for machining
cast iron. For nishing to roughing
applications.
WM Grades for
Stainless Steel
• Two grades to cover all of your
cast iron turning operations.
• Increase cutting speed and/or
feed rate by up to 30% over similar
competitive grades.
WP Grades for Steel
• Three grades and seven primary
geometries for use in roughing to
nishing operations.
• Increase cutting speed and/or
feed rate to gain productivity.
Victory Toughness/Wear Resistance
wear resistance wear resistance
wear resistance
wear resistance
toughness
toughness
toughness
toughness
Positive Inserts Negative Inserts
• Screw-on inserts are the rst choice for
I.D. turning of all materials and O.D. turning
on small to medium lathes.
• Suitable for all workpiece materials.
• Negative style inserts are your rst choice for general
machining of all materials on medium to large lathes.
• Negative style inserts offer the best economy for high
metal removal rates.
• Available in at-top and chip-control geometries
with both moulded and ground peripheries.
• Suitable for all workpiece materials.
Ceramic Inserts PcBN and PCD Inserts
• Ceramic inserts are a great choice for productive
machining of high-temp alloys.
• Negative rake inserts are also recommended for
the machining of hardened materials and cast irons.
• Available in at-top geometries with moulded and
ground peripheries.
• PcBN can be used for machining steels with a hardness
higher than 48 HRC.
• PcBN inserts can also be used for productivity improvements
in machining cast irons and high-temp alloys.
• PCD inserts are used for machining non-ferrous materials.
WID_Master16_Turning_Inserts_B006_B007_Metric_REBRAND.indd 7 10/30/15 2:35 PM
B8
LViWID M 16 T i I B008 B009 M i REBRAND N b 11 2015 10 19 AM
widia.com
WIDIA™ Victory™ • High-Performance Inserts
Insert Selection System
Step 1 • Select the insert geometry
Step 2 • Select the grade
Step 3 • Select the cutting speed
How to Use
The WIDIA three-step insert selection system makes choosing and applying the most productive tool as easy as 1, 2, 3.
Tool recommendations are based on six workpiece material groups, optimising selection accuracy.
Given: depths of cut = 1mm (.040")
feed = 4mm (.016 IPR)
Unknown: insert geometry
Solution: -RH
Given: cutting conditions:
lightly interrupted cut
Geometry: -RH
Unknown: grade
Solution: WP25CT™
Given: grade WP35CT™
cutting conditions
material CK15
Unknown: cutting speed
Solution: 210 m/min
Need help in selecting a product?
Additional information can be obtained by contacting
the WIDIA Customer Application Support Team.
Go to widia.com for your country’s phone number.
Insert Selection System
Example:
Six workpiece material groups
WID_Master16_Turning_Inserts_B008_B009_Metric_REBRAND.indd 8 11/11/15 5:36 PM
B9
LViWID M 16 T i I B008 B009 M i REBRANDN b 11 201510 19AM
widia.com
Negative Inserts
feed rate (mm/rev)
depth of cut (in)
depth of cut (mm)
-RH -UR
Roughing
-ML -MR
Medium
Machining
feed rate (in/rev)
-FF
Finishing
WIDIA™ Victory™ • High-Performance Inserts
Insert Selection System
Step 1 • Select the insert geometry
WIDIA Material Group Selection Guide:
To optimise speed recommendations, material subgroups have
been added to each of the six workpiece material groups.
Step 3 • Selecting the cutting speed
Step 2 • Select the grade
PSteel
MStainless Steel
KCast Iron
NNon-Ferrous
SHigh-Temp Alloys
HHardened Materials
cutting condition
Negative Insert Geometry Positive Insert Geometry
-FF -ML -MR -UR -RH -FP -MU -MP
heavily interrupted cut WP15CT WP25CT WP35CT/
WP25CT WP35CT WP35CT WP25CT/
WS25PT WP35CT WM35CT
lightly interrupted cut WP15CT WP25CT WP25CT WP35CT WP35CT WP25CT WP25CT WP25CT
varying depth of cut,
casting, or forging skin WP15CT WP15CT WP15CT WP25CT WP25CT WP15CT WP15CT WP15CT
smooth cut, pre-turned surface WP15CT WP15CT WP15CT WP25CT WP25CT WP15CT WP15CT WP15CT
Low-Carbon (<0.3% C) and Free-Machining Steel speed — m/min Starting Conditions
material
group grade 135 180 225 275 320 360 410 455 495 m/min
P0/P1
WP15CT 395
WP25CT 275
WP35CT 210
WS10PT 280
material
material group
ISO code
number of material
subgroups
steel
P
1–6
stainless steel
M
1–3
cast iron
K
1–3
non-ferrous materials
N
1–8
high-temp alloys
S
1–4
hardened materials
H
1
WID_Master16_Turning_Inserts_B008_B009_Metric_REBRAND.indd 9 11/11/15 5:36 PM
B10
LViWID M 16 T i I B010 B011 M i REBRAND O b 15 2015 9 21 AM
widia.com
WIDIA™ Victory™ • High-Performance Inserts
Steel • Carbon, Alloy, and Tool Steels up to 450 HB (48 HRC)
(continued)
Negative Wiper Inserts Positive Wiper Inserts
feed rate (mm/rev) feed rate (mm/rev)
depth of cut (in)
depth of cut (mm)
depth of cut (in)
depth of cut (mm)
-MW -MW
Medium Wiper Medium Wiper
-FW -FW
Finishing Wiper Finishing Wiper
feed rate (in/rev) feed rate (in/rev)
Step 1 • Select the insert geometry
Step 2 • Select the grade
cutting condition
Negative Insert Geometry Positive Insert Geometry
-FW -MW -FW -MW
heavily interrupted cut WP15CT WP25CT – WP25CT
lightly interrupted cut WP15CT WP25CT WP15CT WP25CT
varying depth of cut,
casting, or forging skin WP15CT WP15CT WP15CT WP15CT
smooth cut, pre-turned surface WP15CT WP15CT WP15CT WP15CT
Negative Inserts Positive Inserts
feed rate (mm/rev) feed rate (mm/rev)
depth of cut (in)
depth of cut (mm)
depth of cut (in)
depth of cut (mm)
-RH -UR -MP -MU
Roughing Medium
Machining
-ML -MR -FP
Medium
Machining
Finishing
feed rate (in/rev) feed rate (in/rev)
-FF
Finishing
Step 1 • Select the insert geometry
Step 2 • Select the grade
cutting condition
Negative Insert Geometry Positive Insert Geometry
-FF -ML -MR -UR -RH -FP -MU -MP
heavily interrupted cut WP15CT WP25CT WP35CT/
WP25CT WP35CT WP35CT WP25CT/
WS25PT WP35CT WM35CT
lightly interrupted cut WP15CT WP25CT WP25CT WP35CT WP35CT WP25CT WP25CT WP25CT
varying depth of cut,
casting, or forging skin WP15CT WP15CT WP15CT WP25CT/
WP10CT WP25CT WP15CT WP25CT/
WP10CT WP15CT
smooth cut, pre-turned surface WP15CT WP15CT WP15CT WP25CT/
WP10CT WP25CT WP15CT WP25CT/
WP10CT WP15CT
WID_Master16_Turning_Inserts_B010_B011_Metric_REBRAND.indd 10 10/30/15 2:35 PM
B11
LViWID M 16 T i I B010 B011 M i REBRANDO b 15 20159 21AM
widia.com
WIDIA™ Victory™ • High-Performance Inserts
Steel • Carbon, Alloy, and Tool Steels up to 450 HB (48 HRC)
Step 3 • Select the cutting speed
Low-Carbon (<0.3% C) and Free-Machining Steel speed — m/min Starting Conditions
material
group grade 135 180 225 275 320 360 410 455 495 m/min
P0/P1
WP15CT 395
WP25CT 275
WP35CT 210
WS10PT 280
WM35CT 280
Medium- and High-Carbon Steels (<0.3% C) speed — m/min Starting Conditions
material
group grade 135 180 225 275 320 360 410 455 495 m/min
P2
WP15CT 265
WP25CT 195
WP35CT 150
WS10PT 200
WM35CT 200
Ferritic, Martensitic, and PH Stainless Steels
(340–450 HB) (36–48 HRC) speed — m/min Starting Conditions
material
group grade 105 135 165 195 225 255 285 315 345 m/min
P6
WP15CT 180
WP25CT 150
WP35CT 105
WS10PT 150
Ferritic, Martensitic, and PH Stainless Steels
()330 HB) ()35 HB) speed — m/min Starting Conditions
material
group grade 120 150 180 210 240 270 300 330 360 m/min
P5
WP15CT 215
WP25CT 195
WP35CT 135
WS10PT 200
Alloy steels and Tool Steels (340–450 HB) (36–48 HRC) speed — m/min Starting Conditions
material
group grade 60 90 120 150 180 210 240 270 300 m/min
P4
WP15CT 145
WP25CT 105
WP35CT 95
WS10PT 110
WM35CT 110
Alloy Steels and Tool Steels ()330 HB) ()35 HRC) speed — m/min Starting Conditions
material
group grade 135 180 225 275 320 360 410 455 495 m/min
P3
WP15CT 190
WP25CT 155
WP35CT 120
WS10PT 155
WM35CT 155
(continued)
WID_Master16_Turning_Inserts_B010_B011_Metric_REBRAND.indd 11 10/30/15 2:35 PM
B12
LViWID M 16 T i I B012 B013 M i REBRAND O b 15 2015 9 20 AM
widia.com
WIDIA™ Victory™ • High-Performance Inserts
Stainless Steel • Austenitic Stainless Steels
(continued)
Step 2 • Select the grade
cutting condition
Negative Insert Geometry Positive Insert Geometry
-FW -MW -FW
heavily interrupted cut WM15CT WM15CT WM15CT
lightly interrupted cut WM15CT WM25CT WM15CT
varying depth of cut,
casting, or forging skin WM15CT WM25CT WM15CT
smooth cut, pre-turned surface WM15CT WM25CT WM15CT
Step 1 • Select the insert geometry
Negative Wiper Inserts Positive Wiper Inserts
feed rate (mm/rev) feed rate (mm/rev)
depth of cut (in)
depth of cut (mm)
depth of cut (in)
depth of cut (mm)
-MW -FW
Medium Wiper Finishing Wiper
-FW
Finishing Wiper
feed rate (in/rev) feed rate (in/rev)
Step 1 • Select the insert geometry
Negative Inserts Positive Inserts
feed rate (mm/rev) feed rate (mm/rev)
depth of cut (in)
depth of cut (mm)
depth of cut (in)
depth of cut (mm)
-RH -UR -MP -MU
Roughing Medium
Machining
-MR -UM -FP
Medium
Machining
Finishing
feed rate (in/rev) feed rate (in/rev)
-UF -FF
Finishing
WID_Master16_Turning_Inserts_B012_B013_Metric_REBRAND.indd 12 10/30/15 2:36 PM
B13
LViWID M 16 T i I B012 B013 M i REBRANDO b 15 20159 20AM
widia.com
WIDIA™ Victory™ • High-Performance Inserts
Stainless Steel • Austenitic Stainless Steels
(continued)
Step 2 • Select the grade
cutting condition
Positive Insert Geometry
-FP -MU -MP
heavily interrupted cut WM25CT WM35CT/ WS25PT WM25CT
lightly interrupted cut WM25CT WM25CT/ WS10PT WM25CT
varying depth of cut,
casting, or forging skin WM25CT/ WM15CT WM25CT WM25CT/ WM15CT
smooth cut, pre-turned surface WM15CT WM25CT WM15CT
cutting condition
Negative Insert Geometry
-FF -UF -MR -UM -RH -UR
heavily interrupted cut WS10PT WM15CT WM35CT WM35CT – WM35CT
lightly interrupted cut WS10PT WM15CT WM25CT WM25CT WM35CT WM35CT/
WM25CT
varying depth of cut,
casting, or forging skin WM15CT WM15CT/
WS10PT WM15CT WM15CT WM35CT WM25CT
smooth cut, pre-turned surface WM15CT WM15CT WM15CT WM15CT – WM15CT
Step 3 • Select the cutting speed
Austenitic Stainless Steel: Duplex
(Ferritic and Austenitic Mixture) speed — m/min Starting Conditions
material
group grade 90 135 180 225 270 315 200 360 405 450 m/min
M3
WM15CT 150
WM25CT 120
WM35CT 90
WS10PT 185
WS25PT 150
Austenitic Stainless Steel speed — m/min Starting Conditions
material
group grade 90 135 180 225 270 315 200 360 405 450 m/min
M2
WM15CT 165
WM25CT 140
WM35CT 105
WS10PT 200
WS25PT 165
Austenitic Stainless Steel speed — m/min Starting Conditions
material
group grade 90 135 180 225 270 315 200 360 405 450 m/min
M1
WM15CT 180
WM25CT 150
WM35CT 120
WS10PT 215
WS25PT 180
WID_Master16_Turning_Inserts_B012_B013_Metric_REBRAND.indd 13 10/30/15 2:36 PM
B14
LViWID M 16 T i I B014 B015 M i REBRAND O b 15 2015 9 21 AM
widia.com
WIDIA™ Victory™ • High-Performance Inserts
Cast Iron • Grey and Ductile Irons
(continued)
Step 2 • Select the grade
cutting condition
Negative Insert Geometry Positive Insert Geometry
-FW -MW -FW -MW
heavily interrupted cut ––––
lightly interrupted cut WK05CT WK05CT WK05CT WK05CT
varying depth of cut,
casting, or forging skin WK05CT WK05CT WK05CT WK05CT
smooth cut, pre-turned surface WK05CT WK05CT WK05CT WK05CT
Step 1 • Select the insert geometry
Negative Inserts Positive Inserts
feed rate (mm/rev) feed rate (mm/rev)
depth of cut (in)
depth of cut (mm)
depth of cut (in)
depth of cut (mm)
-RH ..MA -MP -MU
Roughing Medium
Machining
-ML -FP
Medium
Machining
Finishing
feed rate (in/rev) feed rate (in/rev)
-FF
Finishing
Step 1 • Select the insert geometry
Negative Wiper Inserts Positive Wiper Inserts
feed rate (mm/rev) feed rate (mm/rev)
depth of cut (in)
depth of cut (mm)
depth of cut (in)
depth of cut (mm)
-MW -MW
Medium Wiper Medium Wiper
-FW -FW
Finishing Wiper Finishing Wiper
feed rate (in/rev) feed rate (in/rev)
WID_Master16_Turning_Inserts_B014_B015_Metric_REBRAND.indd 14 10/30/15 2:36 PM
B15
LViWID M 16 T i I B014 B015 M i REBRANDO b 15 20159 21AM
widia.com
WIDIA™ Victory™ • High-Performance Inserts
Cast Iron • Grey and Ductile Irons
(continued)
Step 2 • Select the grade
cutting condition
Negative Insert Geometry Positive Insert Geometry
-FF -ML -UR ..MA -FP -MU -MP
heavily interrupted cut WK20CT WK20CT WK20CT WK20CT WK20CT WK20CT WK20CT
lightly interrupted cut WK20CT WK20CT WK20CT WK20CT WK20CT WK20CT WK20CT
varying depth of cut,
casting, or forging skin WK20CT WK05CT WK20CT WK05CT WK20CT WK20CT WK20CT
smooth cut, pre-turned surface WK20CT WK05CT WS10PT WK05CT WK20CT
WK20CT/
WK05CT/
WS10PT
WK20CT
Step 3 • Select the cutting speed
Ductile, Malleable, and Austempered Cast Irons
(>600 MPa tensile strength) speed — m/min Starting Conditions
material
group grade 90 135 180 225 275 320 360 410 460 500 m/min
K3
WS10PT 150
WK05CT 240
WK20CT 210
Ductile, Compacted Graphite, and Malleable Cast Irons
(<600 MPa tensile strength) speed — m/min Starting Conditions
material
group grade 90 135 180 225 275 320 360 410 460 500 m/min
K2
WS10PT 200
WK05CT 360
WK20CT 240
Grey Cast Iron speed — m/min Starting Conditions
material
group grade 60 180 305 430 550 675 800 920 1040 1160 m/min
K1 WK05CT 450
WK20CT 300
WID_Master16_Turning_Inserts_B014_B015_Metric_REBRAND.indd 15 10/30/15 2:36 PM
B16
LViWID M 16 T i I B016 B017 M i REBRAND N b 11 2015 10 22 AM
widia.com
WIDIA™ Victory™ • High-Performance Inserts
High-Temp Alloys • Iron-, Cobalt-, and Nickel-Based and Titanium Alloys
Step 1 • Select the insert geometry
Step 2 • Select the grade
cutting condition
Negative Insert Geometry Positive Insert Geometry
-FS -NGP/-NMP -MS -UR -FP -MU
heavily interrupted cut WS25PT WS25PT WS25PT WS25PT/
WM35CT
WS25PT/
WM15CT WS25PT
lightly interrupted cut WS10PT WS10PT WS25PT WS25PT/
WM25CT WS25PT WS25PT
varying depth of cut,
casting, or forging skin WS10PT WS10PT WS10PT WS25PT WS10PT WS10PT
smooth cut, pre-turned surface WS10PT/
WU10HT
WS10PT/
WU10HT WS10PT WS10PT WS10PT WS10PT
Negative Inserts Positive Inserts
feed rate (mm/rev) feed rate (mm/rev)
depth of cut (in)
depth of cut (mm)
depth of cut (in)
depth of cut (mm)
-UR -MU
Roughing Medium
Machining
-MS .NMP -FP
Finishing
.NGP
feed rate (in/rev) feed rate (in/rev)
Medium
Machining
-FS
Finishing
(continued)
WID_Master16_Turning_Inserts_B016_B017_Metric_REBRAND.indd 16 11/11/15 5:37 PM
B17
LViWID M 16 T i I B016 B017 M i REBRANDN b 11 201510 22AM
widia.com
WIDIA™ Victory™ • High-Performance Inserts
High-Temp Alloys • Iron-, Cobalt-, and Nickel-Based and Titanium Alloys
Step 3 • Select the cutting speed
Titanium and Titanium Alloys (110–450 HB) ()48 HRC) speed — m/min Starting Conditions
material
group grade 15 45 75 105 140 170 200 230 290 310 m/min
S4
WU10HT 45
WM15CT 70
WM25CT/WM35CT 55
Nickel-Based, Heat-Resistant Alloys
(140–475 HB) ()48 HRC) speed — m/min Starting Conditions
material
group grade 15 45 75 105 140 170 200 230 290 310 m/min
S3
WU10HT 40
WS10PT 70
WS25PT 40
WM15CT 70
WM25CT/WM35CT 40
Cobalt-Based, Heat-Resistant Alloys (150–425 HB) ()45 HRC) speed — m/min Starting Conditions
material
group grade 15 45 75 105 140 170 200 230 290 310 m/min
S2
WU10HT 35
WS10PT 60
WS25PT 30
WM15CT 60
WM25CT/WM35CT 30
Iron-Based, Heat-Resistant Alloys
(135–320 HB) ()34 HRC) speed — m/min Starting Conditions
material
group grade 15 45 75 105 140 170 200 230 290 310 m/min
S1
WU10HT 30
WS10PT 55
WS25PT 40
WM15CT 55
WM25CT/WM35CT 40
(continued)
WID_Master16_Turning_Inserts_B016_B017_Metric_REBRAND.indd 17 11/11/15 5:37 PM
B18
LViWID M 16 T i I B018 B019 M i REBRAND N b 11 2015 10 23 AM
widia.com
WIDIA™ Victory™ • High-Performance Inserts
Chipbreaker Geometries
Negative Inserts
Cutting Edge
Cutting Edge
Corner Radius
Cutting Edge
Corner Radius
..MA
Flat top geometry for machining cast iron. For nishing to roughing applications.
ap
depth of cut (mm)
K
feed rate (mm) fn
.NMP
For medium-duty machining of tough work materials, such as chrome- and
nickel-based alloys. Minimises tendency for materials to adhere to insert.
ap
M
depth of cut (mm)
S
feed rate (mm) fn
4
Semi- nishing geometry for light- to medium-duty steel machining. Reduced back forces
result from adjusted inclination angle. Well-suited for positive, vibration-prone parts. P
ap
M
depth of cut (mm)
feed rate (mm) fn
(continued)
WID_Master16_Turning_Inserts_B018_B019_Metric_REBRAND.indd 18 11/11/15 5:37 PM
B19
LViWID M 16 T i I B018 B019 M i REBRANDN b 11 201510 23AM
widia.com
WIDIA™ Victory™ • High-Performance Inserts
Chipbreaker Geometries
(continued)
Cutting Edge
Corner Radius
Cutting Edge
Corner Radius
Corner Radius
22
For nish turning, producing smooth, accurate surfaces. Very good chip control,
especially at low depths of cut. P
ap
M
depth of cut (mm)
K
feed rate (mm) fn
Negative Inserts
65
Rough-turning geometry with chip control extending to the medium-duty range.
Positive rake angle lowers cutting forces, reducing power requirements.
Used on low-tensile and stainless steels.
P
ap
M
depth of cut (mm)
feed rate (mm) fn
CT
Designed for outward copy turning. Where other geometries produce long chips,
the unique distribution of the cut results in good chip control.
ap
M
depth of cut (mm)
feed rate (mm) fn
(continued)
WID_Master16_Turning_Inserts_B018_B019_Metric_REBRAND.indd 19 11/11/15 5:37 PM
B20
LViWID M 16 T i I B020 B021 M i REBRAND N b 11 2015 7 22 AM
widia.com
WIDIA™ Victory™ • High-Performance Inserts
Chipbreaker Geometries
(continued)
Negative Inserts
Cutting Edge
Cutting Edge
Corner Radius
Cutting Edge
Corner Radius
FF
For nish turning, producing smooth, accurate surfaces.
Very good chip control, especially at low depths of cut. P
ap
M
depth of cut (mm)
K
S
feed rate (mm) fn
FS
For nishing applications. Ground periphery with positive cutting edge ideally
suited for high-temp alloys. Micro nished edge on the ground periphery adds
just a slight hone for improved edge integrity and reliability.
ap
depth of cut (mm)
S
feed rate (mm) fn
FW
Wiper geometry for nishing when good surface nish is needed using high feed rates.
First choice for high-performance nishing. P
ap
M
depth of cut (mm)
K
feed rate (mm) fn
(continued)
Corner Radius
WID_Master16_Turning_Inserts_B020_B021_Metric_REBRAND.indd 20 11/11/15 9:20 AM
B21
LViWID M 16 T i I B020 B021 M i REBRANDN b 11 20157 22AM
widia.com
WIDIA™ Victory™ • High-Performance Inserts
Chipbreaker Geometries
Negative Inserts
(continued)
Cutting Edge
Corner Radius
Cutting Edge
Corner Radius
Cutting Edge
Corner Radius
MG
For light machining to light roughing. P
ap
M
depth of cut (mm)
K
feed rate (mm) fn
ML
For nishing to medium machining with a negative, stable cutting edge. P
ap
16,0
8,0
4,0
2,0
1,0
0,5
1,60,80,40,20,1
depth of cut (mm)
K
feed rate (mm) fn
MR
For medium to light roughing of steels, dif cult-to-machine high-alloy titanium,
and aluminium materials. High strength to deal with heavy chip deformation. P
ap
M
depth of cut (mm)
feed rate (mm) fn
(continued)
WID_Master16_Turning_Inserts_B020_B021_Metric_REBRAND.indd 21 11/11/15 9:20 AM
B22
LViWID M 16 T i I B022 B023 M i REBRAND O b 15 2015 9 22 AM
widia.com
WIDIA™ Victory™ • High-Performance Inserts
Chipbreaker Geometries
(continued)
Negative Inserts
Cutting Edge
Corner Radius
Cutting Edge
Corner Radius
Cutting Edge
Corner Radius
MS
For medium machining in high-temp materials. Utilises a micro- nished
edge preparation to increase edge toughness.
ap
depth of cut (mm)
S
feed rate (mm) fn
MW
Wiper geometry for light to medium turning with high feed rates. Feed twice as high
as with edges with full corner radii to produce same surface nish. P
ap
M
depth of cut (mm)
K
feed rate (mm) fn
RH
For medium-duty to roughing. Outstanding chip control. High edge strength
for interrupted cuts, forging skin, or scale. Preferred for all cast iron, such as
grey, malleable, and nodular.
P
ap
M
depth of cut (mm)
K
feed rate (mm) fn
(continued)
WID_Master16_Turning_Inserts_B022_B023_Metric_REBRAND.indd 22 10/30/15 2:38 PM
B23
LViWID M 16 T i I B022 B023 M i REBRANDO b 15 20159 22AM
widia.com
WIDIA™ Victory™ • High-Performance Inserts
Chipbreaker Geometries
(continued)
Negative Inserts
Cutting Edge
Corner Radius
Cutting Edge
Corner Radius
Cutting Edge
Corner Radius
SR
A super roughing geometry. The SR has a strong cutting edge to support
high cutting loads in roughing applications. Can produce high metal removal rates. P
ap
M
depth of cut (mm)
feed rate (mm) fn
UF
For nishing with a positive cutting edge for reduced cutting forces
and superior surface quality.
ap
1,60,80,40,20,1
16,0
8,0
4,0
2,0
1,0
0,5
M
depth of cut (mm)
S
feed rate (mm) fn
UM
For medium-duty turning operations. Soft-cutting chipbreaker. Used in applications
producing varying chip sections, such as pro le or copy turning. Good dimensional
accuracy. For soft steel materials and stainless steels.
P
ap
M
depth of cut (mm)
S
feed rate (mm) fn
(continued)
WID_Master16_Turning_Inserts_B022_B023_Metric_REBRAND.indd 23 10/30/15 2:38 PM
B24
LViWID M 16 T i I B024 B025 M i REBRAND O b 15 2015 9 22 AM
widia.com
WIDIA™ Victory™ • High-Performance Inserts
Chipbreaker Geometries
(continued)
Negative Inserts
UR
Roughing geometry with smooth chip forming and improved coolant ow for increased tool life.
Positive geometry reduces cutting forces and improves depth-of-cut notching resistance. Ideally
suitable for stainless steel applications and for smooth machining of steel.
P
ap
1,60,80,40,20,1
16,0
8,0
4,0
2,0
1,0
0,5
M
depth of cut (mm)
K
S
feed rate (mm) fn
Positive Inserts
Cutting Edge
Corner Radius
Cutting Edge
Corner Radius
2
Sharp edge for nish machining. Good chip control with very small chip sections.
High dimensional accuracy and smooth surface nishes. Inserts with .008" corner radius
precision-ground on all sides.
P
ap
M
depth of cut (mm)
K
N
S
Hfeed rate (mm) fn
Cutting Edge
Corner Radius
41
Preferred for light- to medium-duty machining. Low cutting forces and reduced power
requirements due to positive rake angle. Good chip control over a wide range. Also used
on short-chipping cast iron.
P
ap
M
depth of cut (mm)
K
feed rate (mm) fn
(continued)
WID_Master16_Turning_Inserts_B024_B025_Metric_REBRAND.indd 24 10/30/15 2:38 PM
B25
LViWID M 16 T i I B024 B025 M i REBRANDO b 15 20159 22AM
widia.com
WIDIA™ Victory™ • High-Performance Inserts
Chipbreaker Geometries
FP
For nishing to medium turning operations with optimal chip control over
a wide range of cutting conditions and workpiece materials. P
ap
16,0
8,0
4,0
2,0
1,0
0,5
1,60,80,40,20,1
M
depth of cut (mm)
K
S
feed rate (mm) fn
MP
For medium to rough turning with reduced cutting forces and improved chip control
for high feed rates. Suitable for high metal removal rates and spindling applications. P
ap
16,0
8,0
4,0
2,0
1,0
0,5
1,60,80,40,20,1
M
depth of cut (mm)
K
S
feed rate (mm) fn
Cutting Edge
Corner Radius
MU
A medium universal geometry with a soft cutting action due to its positive geometry.
Has a versatile application range and is suited for turning unstable components and
for boring applications.
P
ap
M
depth of cut (mm)
K
S
feed rate (mm) fn
Cutting Edge
Corner Radius
Cutting Edge
Corner Radius
Positive Inserts (continued)
WID_Master16_Turning_Inserts_B024_B025_Metric_REBRAND.indd 25 10/30/15 2:38 PM
B26
LViWID M 16 T i I B026 B027 M i REBRAND N b 18 2015 7 34 AM
widia.com
Coatings provide high-speed
capability and are engineered
for fi nishing to heavy roughing.
WIDIA™ Victory™ • High-Performance Inserts
Grades and Grade Descriptions
Grade
wear
resistance toughness
Coating Grade Description 05 10 15 20 25 30 35 40 45
WP15CT
Coated carbide. MT-CVD/CVD — TiN-TiCN-Al2O3-ZrCN. Good balance
of wear resistance and toughness properties. High productivity machining
on smooth to lightly interrupted cuts. For steels.
P
K
HC-P15
WP25CT
Coated carbide. MT-CVD/CVD — TiN-TiCN-Al2O3-ZrCN. Good toughness properties.
Excellent rst choice for steel machining, high productivity metal removal for all but the
harshest interrupted cuts.
P
K
HC-P25
WP35CT
Coated carbide. MT-CVD/CVD — TiN-TiCN-Al2O3-ZrCN. Proven on all roughing
and heavy roughing operations, wet or dry, on interrupted and uninterrupted cuts.
P
M
HC-P35
WM15CT
Coated carbide. MT-CVD/CVD — TiN-TiCN-Al2O3-ZrCN. High degree of
wear resistance and good resistance to depth-of-cut notching for long
tool life in nishing to medium turning applications.
P
M
S
HC-M15
WM25CT
Coated carbide. MT-CVD/CVD — TiN-TiCN-Al2O3-ZrCN. Good balance of
wear resistance and toughness properties. Light and medium machining.
For austenitic stainless steel AISI series.
P
M
S
HC-M25
WM35CT
Coated carbide. MT-CVD/CVD — TiN-TiCN-Al2O3-ZrCN. Good toughness
and wear resistance balance. For medium to roughing operations with light
and heavily interrupted cuts.
P
M
S
HC-M35
PSteel
MStainless Steel
KCast Iron
NNon-Ferrous
SHigh-Temp Alloys
HHardened Materials
WID_Master16_Turning_Inserts_B026_B027_Metric_REBRAND.indd 26 11/18/15 7:35 AM
B27
LViWID M 16 T i I B026 B027 M i REBRANDN b 18 20157 34AM
widia.com
WK05CT
Coated carbide. MT-CVD/CVD — TiN-TiCN-Al2O3. Increased wear resistance
for long tool life at high cutting speeds. Enhanced edge strength against
depth-of-cut notching in interrupted cuts. Maximum wear resistance for long
tool life at high cutting speeds in nish to medium machining.
P
K
HC-K05
WK20CT
Coated carbide. MT-CVD/CVD — TiN-TiCN-Al2O3. First choice for a wide range
of machining on all grey and ductile irons, light to heavy machining, smooth
or interrupted cuts, and wet or dry.
P
K
HC-K20
Coatings provide high-speed
capability and are engineered
for fi nishing to heavy roughing.
WIDIA™ Victory™ • High-Performance Inserts
Grades and Grade Descriptions
wear
resistance toughness
Coating Grade Description 05 10 15 20 25 30 35 40 45
Grade
WS10PT
An advanced multilayer PVD coating over a very deformation-resistant unalloyed
carbide substrate. The new and improved coating improves edge stability with
wide range speed and feed capabilities. WS10PT
™
is ideal for nishing to general
machining of most workpiece materials at a wide range of speed and feed
capabilities. Excellent for machining most steels, stainless steels, cast irons,
non-ferrous materials, and super alloys with improved edge toughness and
higher cutting speed and feed capabilities.
P
M
K
N
S
HC-S10
H
WS25PT
An advanced PVD grade with hard AlTiN coating and ne-grain unalloyed substrate.
The new and improved coating improves edge stability with wide range speed and
feed capabilities. WS25PT
™
is ideal for general machining of most steels, stainless
steels, high-temp alloys, titanium, irons, and non-ferrous materials at moderate
speeds and over a wide range of feeds, with improved edge toughness for interrupted
cut and high feed rates.
P
M
K
N
S
HC-S25
WU10HT
An uncoated, hard, low-binder content, unalloyed WC/Co ne-grain grade.
WU10HT
™
offers exceptional edge wear and superior thermal deformation
and depth-of-cut notch resistance. The grain structure is well controlled
for minimal pits and aws, which contributes to long, reliable service.
M
N
S
C3-C4
PSteel
MStainless Steel
KCast Iron
NNon-Ferrous
SHigh-Temp Alloys
HHardened Materials
WID_Master16_Turning_Inserts_B026_B027_Metric_REBRAND.indd 27 11/18/15 7:35 AM
widia.com
B28
LViWID M 16 T i I B028 B029 M i REBRAND N b 11 2015 10 28 AM
B28
LViWID M 16 T i I B028 B029 M i REBRAND N b 11 2015 10 28 AM
TTM
Uncoated carbide. Medium machining. For steel.
P
M
HW-P25
TTR
Uncoated carbide. Light and medium machining. For steel.
To be used at low cutting speeds. Effective in unfavourable conditions.
P
HW-P35
TTI15
Cermet. Light machining. Extremely good wear resistance at higher cutting speeds.
For steels and nodular cast iron. Recommended for high cutting speeds under
favourable conditions.
P
M
K
HT-P15
THM
Uncoated carbide. Extraordinarily good balance of hardness, wear resistance,
edge stability, and toughness. Light and medium machining. For cast iron,
all non-ferrous metals, and non-metals. Useful in unfavourable conditions.
K
N
S
HW-K15 H
WIDIA™ Inserts
Grades and Grade Descriptions
wear
resistance toughness
Coating Grade Description 05 10 15 20 25 30 35 40 45
Coatings provide high-speed
capability and are engineered
for fi nishing to heavy roughing.
Grade
PSteel
MStainless Steel
KCast Iron
NNon-Ferrous
SHigh-Temp Alloys
HHardened Materials
WID_Master16_Turning_Inserts_B028_B029_Metric_REBRAND.indd 28 11/11/15 5:37 PM
NOVO KNOWS CAD/CAM
With the addition of NOVO™ to your team, your CAD/CAM capabilities become much
more accurate, streamlined, and productive.
With NOVO: The powerful digital intelligence
of NOVO not only helps the programmer find
the right tool for the metalcutting job, but also
automatically integrates all the tooling data into a
complete CAD/CAM solution. The integration of all
the tooling data increases the viability of the part
being programmed, and is delivered quickly —
saving you time.
Before NOVO: The programmer would be in
their CAD/CAM software, programming a part.
Using the outdated method of finding a tool in
a catalogue, and then manually inputting the
tooling information from the catalogue into the
CAD/CAM software.
The concern is that assumptions are made,
and only partial tooling information is entered.
NOVO can ensure you have the right tools on your machines, in the right sequence. Resulting in
flawless execution that accelerates every job, and maximises every shift. widia.com/novo
WID_Master16_Turning_Inserts_B028_B029_Metric_REBRAND.indd 29 11/11/15 5:37 PM
B30
LViWID M 16 T i I B030 B031 M i REBRAND O b 15 2015 9 24 AM
widia.com
WIDIA™ Victory™ • High-Performance Inserts
ISO Carbide Inserts
P
M
K
N
S
H
rst choice
alternate choice
CCMT
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
CCMT060202 6,35 6,45 2,38 0,2 2,80
–
–
–
–
–
–
–
–
–
–
–
2031658
–
–
–
CCMT060204 6,35 6,45 2,38 0,4 2,80
–
–
–
–
–
–
–
–
–
–
–
2031666
–
2031668
2031665
CCMT090304 9,53 9,67 3,18 0,4 4,40
–
–
–
–
–
–
–
–
–
–
–
2031693
–
2031695
–
CCMT090308 9,53 9,67 3,18 0,8 4,40
–
–
–
–
–
–
–
–
–
–
–
2031706
–
2027339
–
CCMT09T304 9,53 9,67 3,97 0,4 4,40
–
–
–
–
–
–
–
–
–
–
–
2031723
–
–
–
CCMT09T308 9,53 9,67 3,97 0,8 4,40
–
–
–
–
–
–
–
–
–
–
–
2027432
–
–
–
CCMT09T312 9,53 9,67 3,97 1,2 4,40
–
–
–
–
–
–
–
–
–
–
–
–
–
2027465
–
CCMT120408 12,70 12,90 4,76 0,8 5,50
–
–
–
–
–
–
–
–
–
–
–
2027472
–
2027484
–
Inserts
CCMT-2
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
CCMT0602042 6,35 6,45 2,38 0,4 2,80
–
–
–
–
–
–
–
–
–
–
–
–
–
–
2021947
WID_Master16_Turning_Inserts_B030_B031_Metric_REBRAND.indd 30 10/30/15 2:39 PM
B31
LViWID M 16 T i I B030 B031 M i REBRANDO b 15 20159 24AM
WIDIA™ Victory™ • High-Performance Inserts
CCMT-41
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
CCMT12040441 12,70 12,90 4,76 0,4 5,50
–
–
–
–
–
–
–
–
–
–
–
2010027
–
–
–
CCMT12040841 12,70 12,90 4,76 0,8 5,50
–
–
–
–
–
–
–
–
–
–
–
2010061
–
–
–
rst choice
alternate choice
ISO Carbide Inserts
Inserts
CCMT-FP
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
CCMT060202FP 6,35 6,45 2,38 0,2 2,80
4169857
4170140
–
–
4168778
–
–
–
–
–
–
–
–
–
–
CCMT060204FP 6,35 6,45 2,38 0,4 2,80
4169858
4170141
–
4168738
4168779
–
–
4170032
5684337
5684340
–
–
–
–
–
CCMT060208FP 6,35 6,45 2,38 0,8 2,80
4169859
4170142
–
4168739
4168780
–
–
4170083
5684342
5684344
–
–
–
–
–
CCMT09T302FP 9,53 9,67 3,97 0,2 4,40
–
4170293
–
–
4168781
–
–
–
–
–
–
–
–
–
–
CCMT09T304FP 9,53 9,67 3,97 0,4 4,40
4169860
4170294
–
4168740
4168782
–
–
4170084
5684341
5684343
–
–
–
–
–
CCMT09T308FP 9,53 9,67 3,97 0,8 4,40
4169861
4170295
–
4168741
4168783
–
–
4170085
–
5684338
–
–
–
–
–
CCMT120404FP 12,70 12,90 4,76 0,4 5,50
4169862
4170296
–
4168742
4168784
–
–
4170086
–
–
–
–
–
–
–
CCMT120408FP 12,70 12,90 4,76 0,8 5,50
4169993
4170297
–
4168763
4168785
–
–
4170087
–
–
–
–
–
–
–
CCMT120412FP 12,70 12,90 4,76 1,2 5,50
4169994
4170298
–
–
4168786
–
–
4170088
–
–
–
–
–
–
–
P
M
K
N
S
H
C2–C49 C50–C81 C86–C129 B8–B25 B26–B28 B30–B105
WID_Master16_Turning_Inserts_B030_B031_Metric_REBRAND.indd 31 10/30/15 2:39 PM
B32
LViWID M 16 T i I B032 B033 M i REBRAND O b 15 2015 9 24 AM
widia.com
WIDIA™ Victory™ • High-Performance Inserts
CCMT-FW
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
CCMT060202FW 6,35 6,45 2,38 0,2 2,80
5623344
–
–
–
–
–
–
–
–
–
–
–
–
–
–
CCMT060204FW 6,35 6,45 2,38 0,4 2,80
5623345
–
–
5623346
–
–
–
–
–
–
–
–
–
–
–
CCMT060208FW 6,35 6,45 2,38 0,8 2,80
5623347
–
–
5623348
–
–
–
–
–
–
–
–
–
–
–
CCMT09T304FW 9,53 9,67 3,97 0,4 4,40
5623349
–
–
5623470
–
–
–
–
–
–
–
–
–
–
–
CCMT09T308FW 9,53 9,67 3,97 0,8 4,40
5623473
–
–
–
–
–
–
–
–
–
–
–
–
–
–
P
M
K
N
S
H
rst choice
alternate choice
ISO Carbide Inserts
Inserts
CCMT-MP
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
CCMT060204MP 6,35 6,45 2,38 0,4 2,80
4170197
4170217
–
4168893
4168906
–
–
4170237
5684351
–
–
–
–
–
–
CCMT09T304MP 9,53 9,67 3,97 0,4 4,40
4170198
4170218
–
4168894
4168907
–
–
4170238
5684352
–
–
–
–
–
–
CCMT09T308MP 9,53 9,67 3,97 0,8 4,40
4170199
4170219
–
4168895
4168908
–
–
4170239
5684350
–
–
–
–
–
–
CCMT09T312MP 9,53 9,67 3,97 1,2 4,40
–
4170220
–
–
4168909
–
–
–
–
–
–
–
–
–
–
CCMT120408MP 12,70 12,90 4,76 0,8 5,50
4170200
4170221
–
4168896
4168910
–
–
4170240
5684349
–
–
–
–
–
–
CCMT120412MP 12,70 12,90 4,76 1,2 5,50
–
4170222
–
4168897
4168911
–
–
4170241
–
–
–
–
–
–
–
WID_Master16_Turning_Inserts_B032_B033_Metric_REBRAND.indd 32 10/30/15 2:39 PM
B33
LViWID M 16 T i I B032 B033 M i REBRANDO b 15 20159 24AM
WIDIA™ Victory™ • High-Performance Inserts
CCMT-MU
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
CCMT060208MU 6,35 6,45 2,38 0,8 2,80
–
–
–
–
5623159
–
–
5623158
–
–
–
–
–
–
–
CCMT090304MU 9,53 9,67 3,18 0,4 4,40
–
5623420
–
–
5623421
–
–
–
–
–
–
–
–
–
–
CCMT090308MU 9,53 9,67 3,18 0,8 4,40
5623425
5623424
–
–
5623423
–
–
–
–
–
–
–
–
–
–
CCMT09T304MU 9,53 9,67 3,97 0,4 4,40
5623431
5623430
–
–
5623427
–
5623429
5623432
5623428
5623426
–
–
–
–
–
CCMT09T308MU 9,53 9,67 3,97 0,8 4,40
5623434
5623436
5623439
–
5623435
–
–
5623433
5623438
5623437
–
–
–
–
–
CCMT120408MU 12,70 12,90 4,76 0,8 5,50
5623440
5623443
–
–
5623442
–
–
5623441
–
5623444
–
–
–
–
–
P
M
K
N
S
H
rst choice
alternate choice
ISO Carbide Inserts
Inserts
CCMT-MW
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
CCMT09T304MW 9,53 9,67 3,97 0,4 4,40
5623471
5623472
–
–
–
–
–
–
–
–
–
–
–
–
–
CCMT09T308MW 9,53 9,67 3,97 0,8 4,40
5623474
5623475
–
–
–
–
–
–
–
–
–
–
–
–
–
CCMT120404MW 12,70 12,90 4,76 0,4 5,50
5623476
5623477
–
–
–
–
–
–
–
–
–
–
–
–
–
CCMT120408MW 12,70 12,90 4,76 0,8 5,50
5623478
5623479
–
–
–
–
–
–
–
–
–
–
–
–
–
C2–C49 C50–C81 C86–C129 B8–B25 B26–B28 B30–B105
WID_Master16_Turning_Inserts_B032_B033_Metric_REBRAND.indd 33 10/30/15 2:39 PM
B34
LViWID M 16 T i I B034 B035 M i REBRAND O b 15 2015 9 24 AM
widia.com
WIDIA™ Victory™ • High-Performance Inserts
CCMW
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
CCMW060202 6,35 6,45 2,38 0,2 2,80
–
–
–
–
–
–
–
–
–
–
–
2031733
–
–
–
CCMW060204 6,35 6,45 2,38 0,4 2,80
–
–
–
–
–
–
4170464
4170368
–
–
–
2027507
–
–
–
CCMW090302 9,53 9,67 3,18 0,2 4,40
–
–
–
–
–
–
–
–
–
–
–
2031734
–
–
–
CCMW090304 9,53 9,67 3,18 0,4 4,40
–
–
–
–
–
–
4170465
4170369
–
–
–
2027509
–
–
–
CCMW090308 9,53 9,67 3,18 0,8 4,40
–
–
–
–
–
–
4170466
4170370
–
–
–
–
–
–
–
CCMW09T304 9,53 9,67 3,97 0,4 4,40
–
–
–
–
–
–
4170467
4170371
–
–
–
2027511
–
–
–
CCMW09T308 9,53 9,67 3,97 0,8 4,40
–
–
–
–
–
–
4170468
4170372
–
–
–
2027512
–
–
–
CCMW120404 12,70 12,90 4,76 0,4 5,50
–
–
–
–
–
–
4170469
4170373
–
–
–
2027524
–
–
–
CCMW120408 12,70 12,90 4,76 0,8 5,50
–
–
–
–
–
–
4170470
4170374
–
–
–
2027525
–
–
–
P
M
K
N
S
H
rst choice
alternate choice
ISO Carbide Inserts
Inserts
WID_Master16_Turning_Inserts_B034_B035_Metric_REBRAND.indd 34 10/30/15 2:40 PM
B35
LViWID M 16 T i I B034 B035 M i REBRANDO b 15 20159 24AM
WIDIA™ Victory™ • High-Performance Inserts
CNGG-FS
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
CNGG120401FS 12,70 12,90 4,76 0,1 5,16
–
–
–
–
–
–
–
–
5548576
–
–
–
–
–
–
CNGG120402FS 12,70 12,90 4,76 0,2 5,16
–
–
–
–
–
–
–
–
5548575
–
–
–
–
–
–
CNGG120404FS 12,70 12,90 4,76 0,4 5,16
–
–
–
–
–
–
–
–
5548577
5538204
5549945
–
–
–
–
CNGG120408FS 12,70 12,90 4,76 0,8 5,16
–
–
–
–
–
–
–
–
5548578
5538205
5549946
–
–
–
–
CNGG120412FS 12,70 12,90 4,76 1,2 5,16
–
–
–
–
–
–
–
–
5548579
–
–
–
–
–
–
P
M
K
N
S
H
rst choice
alternate choice
ISO Carbide Inserts
Inserts
CNGP
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
CNGP120401 12,70 12,90 4,76 0,1 5,16
–
–
–
–
–
–
–
–
5549137
–
–
–
–
–
–
CNGP120402 12,70 12,90 4,76 0,2 5,16
–
–
–
–
–
–
–
–
5549138
–
5549206
–
–
–
–
CNGP120404 12,70 12,90 4,76 0,4 5,16
–
–
–
–
–
–
–
–
5549139
–
5549207
–
–
–
–
CNGP120408 12,70 12,90 4,76 0,8 5,16
–
–
–
–
–
–
–
–
5549190
–
5549208
–
–
–
–
C2–C49 C50–C81 C86–C129 B8–B25 B26–B28 B30–B105
WID_Master16_Turning_Inserts_B034_B035_Metric_REBRAND.indd 35 10/30/15 2:40 PM
B36
LViWID M 16 T i I B036 B037 M i REBRAND O b 15 2015 9 24 AM
widia.com
WIDIA™ Victory™ • High-Performance Inserts
CNMA
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
CNMA120404 12,70 12,90 4,76 0,4 5,16
–
–
–
–
–
–
4171595
4171863
–
–
–
–
–
–
–
CNMA120408 12,70 12,90 4,76 0,8 5,16
–
–
–
–
–
–
4171596
4171864
–
–
–
–
–
–
–
CNMA120412 12,70 12,90 4,76 1,2 5,16
–
–
–
–
–
–
4171597
4171865
–
–
–
–
–
–
–
CNMA120416 12,70 12,90 4,76 1,6 5,16
–
–
–
–
–
–
4171598
4171866
–
–
–
–
–
–
–
CNMA160608 15,88 16,12 6,35 0,8 6,35
–
–
–
–
–
–
–
4171867
–
–
–
–
–
–
–
CNMA160612 15,88 16,12 6,35 1,2 6,35
–
–
–
–
–
–
4171599
4171868
–
–
–
–
–
–
–
CNMA160616 15,88 16,12 6,35 1,6 6,35
–
–
–
–
–
–
4171600
4171869
–
–
–
–
–
–
–
CNMA190608 19,05 19,34 6,35 0,8 7,93
–
–
–
–
–
–
4171601
4171870
–
–
–
–
–
–
–
CNMA190612 19,05 19,34 6,35 1,2 7,93
–
–
–
–
–
–
4171602
4171871
–
–
–
–
–
–
–
CNMA190616 19,05 19,34 6,35 1,6 7,93
–
–
–
–
–
–
4171633
4171872
–
–
–
–
–
–
–
P
M
K
N
S
H
rst choice
alternate choice
ISO Carbide Inserts
Inserts
WID_Master16_Turning_Inserts_B036_B037_Metric_REBRAND.indd 36 10/30/15 2:40 PM
B37
LViWID M 16 T i I B036 B037 M i REBRANDO b 15 20159 24AM
WIDIA™ Victory™ • High-Performance Inserts
P
M
K
N
S
H
rst choice
alternate choice
ISO Carbide Inserts
CNMG
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
CNMG120404 12,70 12,90 4,76 0,4 5,16
–
–
–
–
–
–
–
–
–
–
–
2559561
–
–
–
CNMG120408 12,70 12,90 4,76 0,8 5,16
–
–
–
–
–
–
–
–
–
–
–
2027567
–
–
–
CNMG190612 19,05 19,34 6,35 1,2 7,93
–
–
–
–
–
–
–
–
–
–
–
2559382
–
–
–
CNMG190616 19,05 19,34 6,35 1,6 7,93
–
–
–
–
–
–
–
–
–
–
–
2559317
–
–
–
Inserts
CNMG-22
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
CNMG12040422 12,70 12,90 4,76 0,4 5,16
–
–
–
–
–
–
–
–
–
–
–
–
–
–
2010175
CNMG-FF
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
CNMG120404FF 12,70 12,90 4,76 0,4 5,16
4171025
–
–
–
4172345
–
–
4171318
5684271
–
–
–
–
–
–
CNMG120408FF 12,70 12,90 4,76 0,8 5,16
4171026
–
–
–
4172346
–
–
4171319
5684272
–
–
–
–
–
–
CNMG120412FF 12,70 12,90 4,76 1,2 5,16
4171027
–
–
–
4172347
–
–
4171320
–
–
–
–
–
–
–
C2–C49 C50–C81 C86–C129 B8–B25 B26–B28 B30–B105
WID_Master16_Turning_Inserts_B036_B037_Metric_REBRAND.indd 37 10/30/15 2:40 PM
B38
LViWID M 16 T i I B038 B039 M i REBRAND O b 15 2015 9 24 AM
widia.com
CNMG-FW
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
CNMG120404FW 12,70 12,90 4,76 0,4 5,16
–
–
–
4171755
4172702
–
4171680
–
–
–
–
–
–
–
–
CNMG120408FW 12,70 12,90 4,76 0,8 5,16
5623480
–
–
4171756
4173103
–
4171681
–
–
–
–
–
–
–
–
CNMG120412FW 12,70 12,90 4,76 1,2 5,16
5623481
–
–
4171757
4173104
–
4171683
–
–
–
–
–
–
–
–
Inserts
P
M
K
N
S
H
rst choice
alternate choice
WIDIA™ Victory™ • High-Performance Inserts
ISO Carbide Inserts
CNMG-ML
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
CNMG120404ML 12,70 12,90 4,76 0,4 5,16
4171059
4170458
–
–
–
–
4171657
4171390
–
–
–
–
–
–
–
CNMG120408ML 12,70 12,90 4,76 0,8 5,16
4171060
4170459
–
–
–
–
4171658
4171391
–
–
–
–
–
–
–
CNMG120412ML 12,70 12,90 4,76 1,2 5,16
4171348
4170460
–
–
–
–
4171659
4171392
–
–
–
–
–
–
–
CNMG120416ML 12,70 12,90 4,76 1,6 5,16
–
5684346
–
–
–
–
–
4171393
–
–
–
–
–
–
–
WID_Master16_Turning_Inserts_B038_B039_Metric_REBRAND.indd 38 10/30/15 2:40 PM
B39
LViWID M 16 T i I B038 B039 M i REBRANDO b 15 20159 24AM
WIDIA™ Victory™ • High-Performance Inserts
CNMG-MR
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
CNMG120404MR 12,70 12,90 4,76 0,4 5,16
4171130
4170546
4170043
–
–
–
–
–
–
–
–
–
–
–
–
CNMG120408MR 12,70 12,90 4,76 0,8 5,16
4171131
4170547
4170044
–
4172955
4173120
–
–
–
–
–
–
–
–
–
CNMG120412MR 12,70 12,90 4,76 1,2 5,16
4171132
4170548
4170045
–
4172956
4173121
–
–
–
–
–
–
–
–
–
CNMG120416MR 12,70 12,90 4,76 1,6 5,16
4171133
5684353
–
–
4172957
4173122
–
–
–
–
–
–
–
–
–
CNMG160608MR 15,88 16,12 6,35 0,8 6,35
4171134
4170549
–
–
4172958
4173133
–
–
–
–
–
–
–
–
–
CNMG160612MR 15,88 16,12 6,35 1,2 6,35
4171135
4170550
4170046
–
4172959
4173134
–
–
–
–
–
–
–
–
–
CNMG160616MR 15,88 16,12 6,35 1,6 6,35
4171136
4170551
4170047
–
4172960
4173135
–
–
–
–
–
–
–
–
–
CNMG190612MR 19,05 19,34 6,35 1,2 7,93
4171137
4170552
4170048
–
4172961
4173136
–
–
–
–
–
–
–
–
–
CNMG190616MR 19,05 19,34 6,35 1,6 7,93
4171138
4170563
4170049
–
4172962
4173137
–
–
–
–
–
–
–
–
–
P
M
K
N
S
H
rst choice
alternate choice
ISO Carbide Inserts
Inserts
C2–C49 C50–C81 C86–C129 B8–B25 B26–B28 B30–B105
WID_Master16_Turning_Inserts_B038_B039_Metric_REBRAND.indd 39 10/30/15 2:40 PM
B40
LViWID M 16 T i I B040 B041 M i REBRAND O b 15 2015 9 25 AM
widia.com
WIDIA™ Victory™ • High-Performance Inserts
CNMG-MS
P
M
K
N
S
H
rst choice
alternate choice
ISO Carbide Inserts
Inserts
CNMG-MW
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
CNMG120408MW 12,70 12,90 4,76 0,8 5,16
–
–
–
–
4173112
–
4171682
–
–
–
–
–
–
–
–
CNMG120412MW 12,70 12,90 4,76 1,2 5,16
–
–
–
–
4173113
–
4171684
–
–
–
–
–
–
–
–
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
CNMG120404MS 12,70 12,90 4,76 0,4 5,16
–
–
–
–
–
–
–
–
5908742
5908743
5908744
–
–
–
–
CNMG120408MS 12,70 12,90 4,76 0,8 5,16
–
–
–
–
–
–
–
–
5908745
5908746
5908747
–
–
–
–
CNMG120412MS 12,70 12,90 4,76 1,2 5,16
–
–
–
–
–
–
–
–
5908748
5908749
5908750
–
–
–
–
CNMG120416MS 12,70 12,90 4,76 1,6 5,16
–
–
–
–
–
–
–
–
5908751
5908752
5908753
–
–
–
–
CNMG160608MS 15,88 16,12 6,35 0,8 6,35
–
–
–
–
–
–
–
–
5908754
5908755
5908756
–
–
–
–
CNMG160612MS 15,88 16,12 6,35 1,2 6,35
–
–
–
–
–
–
–
–
5908757
5908758
5908759
–
–
–
–
CNMG190608MS 19,05 19,34 6,35 0,8 7,93
–
–
–
–
–
–
–
–
5908760
5908761
5908762
–
–
–
–
CNMG190612MS 19,05 19,34 6,35 1,2 7,92
–
–
–
–
–
–
–
–
5908763
5908764
5908765
–
–
–
–
CNMG190616MS 19,05 19,34 6,35 1,6 7,92
–
–
–
–
–
–
–
–
5908766
5908767
5908768
–
–
–
–
WID_Master16_Turning_Inserts_B040_B041_Metric_REBRAND.indd 40 10/30/15 2:41 PM
B41
LViWID M 16 T i I B040 B041 M i REBRANDO b 15 20159 25AM
WIDIA™ Victory™ • High-Performance Inserts
CNMG-RH
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
CNMG120408RH 12,70 12,90 4,76 0,8 5,16
4170979
4171504
5684356
–
4173035
–
–
4171903
–
–
–
–
–
–
–
CNMG120412RH 12,70 12,90 4,76 1,2 5,16
4170980
4171505
4171698
–
4173036
–
–
4171904
–
–
–
–
–
–
–
CNMG120416RH 12,70 12,90 4,76 1,6 5,16
4170981
4171506
4171699
–
4173037
–
–
4171905
–
–
–
–
–
–
–
CNMG160608RH 15,88 16,12 6,35 0,8 6,35
4170982
4171507
4171700
–
4173038
–
–
4171906
–
–
–
–
–
–
–
CNMG160612RH 15,88 16,12 6,35 1,2 6,35
4170983
4171508
4171701
–
4173039
–
–
4171907
–
–
–
–
–
–
–
CNMG160616RH 15,88 16,12 6,35 1,6 6,35
4170984
4171509
4171702
–
4173040
–
–
4171908
–
–
–
–
–
–
–
CNMG190608RH 19,05 19,34 6,35 0,8 7,93
4170985
4171510
4171703
–
4173041
–
–
4171909
–
–
–
–
–
–
–
CNMG190612RH 19,05 19,34 6,35 1,2 7,93
4170986
4171511
4171704
–
4173042
–
–
4171910
–
–
–
–
–
–
–
CNMG190616RH 19,05 19,34 6,35 1,6 7,93
4170987
4171512
4171705
–
4173043
–
–
4171911
–
–
–
–
–
–
–
CNMG190624RH 19,05 19,34 6,35 2,4 7,93
4170988
4171523
4171706
–
4173044
–
–
–
–
–
–
–
–
–
–
P
M
K
N
S
H
rst choice
alternate choice
ISO Carbide Inserts
Inserts
C2–C49 C50–C81 C86–C129 B8–B25 B26–B28 B30–B105
WID_Master16_Turning_Inserts_B040_B041_Metric_REBRAND.indd 41 10/30/15 2:41 PM
B42
LViWID M 16 T i I B042 B043 M i REBRAND O b 15 2015 9 25 AM
widia.com
WIDIA™ Victory™ • High-Performance Inserts
CNMG-UF
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
CNMG120404UF 12,70 12,90 4,76 0,4 5,16
5645589
–
–
4169353
4169379
–
–
–
5645600
–
–
–
–
–
–
CNMG120408UF 12,70 12,90 4,76 0,8 5,16
–
–
–
4169354
4169380
–
–
–
5645588
–
–
–
–
–
–
CNMG120412UF 12,70 12,90 4,76 1,2 5,16
–
–
–
4169355
4169381
–
–
–
–
–
–
–
–
–
–
P
M
K
N
S
H
rst choice
alternate choice
ISO Carbide Inserts
Inserts
CNMG-UM
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
CNMG120404UM 12,70 12,90 4,76 0,4 5,16
–
–
–
4172334
4172380
4172410
–
–
5645217
–
–
–
–
–
–
CNMG120408UM 12,70 12,90 4,76 0,8 5,16
5645250
5645219
–
4172335
4172381
4172411
–
–
–
–
–
–
–
–
–
CNMG120412UM 12,70 12,90 4,76 1,2 5,16
–
–
–
4172336
4172382
4172412
–
–
5301414
–
–
–
–
–
–
WID_Master16_Turning_Inserts_B042_B043_Metric_REBRAND.indd 42 10/30/15 2:41 PM
B43
LViWID M 16 T i I B042 B043 M i REBRANDO b 15 20159 25AM
WIDIA™ Victory™ • High-Performance Inserts
CNMG-UR
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
CNMG120404UR 12,70 12,90 4,76 0,4 5,16
4171022
4170500
–
4169406
4169444
4169479
–
–
5578894
5578895
–
–
–
–
–
CNMG120408UR 12,70 12,90 4,76 0,8 5,16
4171093
4170501
4169960
4169407
4169445
4169480
5680086
5680085
5301400
5301402
–
–
–
–
–
CNMG120412UR 12,70 12,90 4,76 1,2 5,16
4171094
4170502
4169961
4169408
4169446
4169481
5680087
4171419
5301413
5301416
–
–
–
–
–
CNMG120416UR 12,70 12,90 4,76 1,6 5,16
4171095
4170503
–
4169409
4169447
4169482
–
4171420
5680089
5680170
–
–
–
–
–
CNMG160608UR 15,88 16,12 6,35 0,8 6,35
4171096
4170504
–
4169410
4169448
4169483
–
4171421
5578896
5578897
–
–
–
–
–
CNMG160612UR 15,88 16,12 6,35 1,2 6,35
4171097
4170505
4169962
4169411
4169449
4169484
–
4171422
5578898
–
–
–
–
–
–
CNMG160616UR 15,88 16,12 6,35 1,6 6,35
4171098
4170506
4169963
–
4169450
4169485
–
4171423
5578900
5578901
–
–
–
–
–
CNMG190612UR 19,05 19,34 6,35 1,2 7,93
4171099
4170507
4169964
4169412
4169451
4169486
5680088
4171424
5578902
5512536
–
–
–
–
–
CNMG190616UR 19,05 19,34 6,35 1,6 7,93
4171100
4170508
4169965
4169423
4169452
4169487
–
4171425
5345183
5579234
–
–
–
–
–
P
M
K
N
S
H
rst choice
alternate choice
ISO Carbide Inserts
Inserts
C2–C49 C50–C81 C86–C129 B8–B25 B26–B28 B30–B105
WID_Master16_Turning_Inserts_B042_B043_Metric_REBRAND.indd 43 10/30/15 2:41 PM
B44
LViWID M 16 T i I B044 B045 M i REBRAND O b 15 2015 9 25 AM
widia.com
WIDIA™ Victory™ • High-Performance Inserts
CNMM-65
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
CNMM12040865 12,70 12,90 4,76 0,8 5,16
5698348
5698349
5698360
–
5698347
–
–
–
–
–
–
–
–
–
–
CNMM12041265 12,70 12,90 4,76 1,2 5,16
5698362
5698363
–
–
5698361
–
–
–
–
–
–
–
–
–
–
CNMM12041665 12,70 12,90 4,76 1,6 5,16
–
5698365
–
–
5698364
–
–
–
–
–
–
–
–
–
–
CNMM16060865 15,88 16,12 6,35 0,8 6,35
–
5698366
5698367
–
–
–
–
–
–
–
–
–
–
–
–
CNMM16061265 15,88 16,12 6,35 1,2 6,35
5698369
5698370
5698371
–
5698368
–
–
–
–
–
–
–
–
–
–
CNMM16061665 15,88 16,12 6,35 1,6 6,35
5698372
5698373
–
–
–
–
–
–
–
–
–
–
–
–
–
CNMM19061265 19,05 19,34 6,35 1,2 7,93
–
–
5698376
–
5698374
–
–
–
–
–
–
–
–
–
–
CNMM19061665 19,05 19,34 6,35 1,6 7,93
5698378
–
–
–
5698377
–
–
–
–
–
–
–
–
–
–
CNMM19062465 19,05 19,34 6,35 2,4 7,93
5698410
5698411
–
–
5698379
–
–
–
–
–
–
–
–
–
–
rst choice
alternate choice
ISO Carbide Inserts
Inserts
CNMM-SR
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
CNMM190616SR 19,05 19,34 6,35 1,6 7,93
5696643
–
–
–
5696642
–
–
–
–
–
–
–
–
–
–
CNMM190624SR 19,05 19,34 6,35 2,4 7,93
–
–
5696644
–
–
–
–
–
–
–
–
–
–
–
–
CNMM250924SR 25,40 25,79 9,53 2,4 9,12
5696645
5696646
5696647
–
–
–
–
–
–
–
–
–
–
–
–
P
M
K
N
S
H
WID_Master16_Turning_Inserts_B044_B045_Metric_REBRAND.indd 44 10/30/15 2:41 PM
B45
LViWID M 16 T i I B044 B045 M i REBRANDO b 15 20159 25AM
CNMP
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
CNMP120404 12,70 12,90 4,76 0,4 5,16
–
–
–
4171585
4173552
4173681
–
–
4172439
–
–
–
–
–
–
CNMP120408 12,70 12,90 4,76 0,8 5,16
–
–
–
4171586
4173653
4173682
–
–
4172440
4172614
–
–
–
–
–
CNMP120412 12,70 12,90 4,76 1,2 5,16
–
–
–
4171587
4173654
4173693
–
–
4172441
4172615
–
–
–
–
–
CNMP160608 15,88 16,12 6,35 0,8 6,35
–
–
–
4171588
4173655
4173694
–
–
–
–
–
–
–
–
–
CNMP160612 15,88 16,12 6,35 1,2 6,35
–
–
–
4171589
4173656
4173695
–
–
4172442
–
–
–
–
–
–
CNMP190612 19,05 19,34 6,35 1,2 7,93
–
–
–
–
–
–
–
–
4172483
–
–
–
–
–
–
CNMP190616 19,05 19,34 6,35 1,6 7,93
–
–
–
4171590
4173657
4173696
–
–
–
–
–
–
–
–
–
WIDIA™ Victory™ • High-Performance Inserts
rst choice
alternate choice
ISO Carbide Inserts
Inserts
CPGT-3
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
CPGT04T1043 4,76 4,83 1,98 0,4 2,15
–
–
–
–
–
–
–
–
–
–
–
–
–
2022082
–
L10
D
RεS
80°
D1
11°
P
M
K
N
S
H
C2–C49 C50–C81 C86–C129 B8–B25 B26–B28 B30–B105
WID_Master16_Turning_Inserts_B044_B045_Metric_REBRAND.indd 45 10/30/15 2:41 PM
B46
LViWID M 16 T i I B046 B047 M i REBRAND O b 15 2015 9 26 AM
widia.com
WIDIA™ Victory™ • High-Performance Inserts
rst choice
alternate choice
ISO Carbide Inserts
CPMT-FP
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
CPMT060202FP 6,35 6,45 2,38 0,2 2,80
4170015
4170325
–
–
4168822
–
–
–
–
–
–
–
–
–
–
CPMT060204FP 6,35 6,45 2,38 0,4 2,80
4170016
4170326
–
4168812
4168823
–
–
4170105
–
–
–
–
–
–
–
CPMT060208FP 6,35 6,45 2,38 0,8 2,80
4170017
4170327
–
4168813
4168824
–
–
4170106
–
–
–
–
–
–
–
CPMT09T302FP 9,53 9,67 3,97 0,2 4,40
–
–
–
–
4168825
–
–
–
–
–
–
–
–
–
–
CPMT09T304FP 9,53 9,67 3,97 0,4 4,40
4170018
4170328
–
4168814
4168826
–
–
4170107
–
–
–
–
–
–
–
CPMT09T308FP 9,53 9,67 3,97 0,8 4,40
4170019
4170329
–
4168815
4168827
–
–
4170108
–
–
–
–
–
–
–
Inserts
CPMT-MP
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
CPMT060208MP 6,35 6,45 2,38 0,8 2,80
4170255
4170257
–
–
–
–
–
–
–
–
–
–
–
–
–
CPMT09T308MP 9,53 9,67 3,97 0,8 4,40
4170256
4170258
–
4168923
4168926
–
–
4170266
–
–
–
–
–
–
–
CPMT09T312MP 9,53 9,67 3,97 1,2 4,40
–
4170259
–
4168924
–
–
–
4170267
–
–
–
–
–
–
–
P
M
K
N
S
H
WID_Master16_Turning_Inserts_B046_B047_Metric_REBRAND.indd 46 10/30/15 2:41 PM
B47
LViWID M 16 T i I B046 B047 M i REBRANDO b 15 20159 26AM
WIDIA™ Victory™ • High-Performance Inserts
DCMT
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
DCMT070204 6,35 7,75 2,38 0,4 2,80
–
–
–
–
–
–
–
–
–
–
–
2027768
–
–
–
DCMT11T304 9,53 11,63 3,97 0,4 4,40
–
–
–
–
–
–
–
–
–
–
–
2027805
–
2027807
2027804
DCMT11T308 9,53 11,63 3,97 0,8 4,40
–
–
–
–
–
–
–
–
–
–
–
2027843
–
–
–
DCMT11T312 9,53 11,63 3,97 1,2 4,40
–
–
–
–
–
–
–
–
–
–
–
2027868
–
–
–
DCMT150404 12,70 15,50 4,76 0,4 5,50
–
–
–
–
–
–
–
–
–
–
–
2027887
–
–
–
DCMT150408 12,70 15,50 4,76 0,8 5,50
–
–
–
–
–
–
–
–
–
–
–
2027908
–
2027910
–
DCMT150412 12,70 15,50 4,76 1,2 5,50
–
–
–
–
–
–
–
–
–
–
–
2027932
–
–
–
DCMT150416 12,70 15,50 4,76 1,6 5,50
–
–
–
–
–
–
–
–
–
–
–
2027965
–
–
–
P
M
K
N
S
H
rst choice
alternate choice
ISO Carbide Inserts
Inserts
C2–C49 C50–C81 C86–C129 B8–B25 B26–B28 B30–B105
WID_Master16_Turning_Inserts_B046_B047_Metric_REBRAND.indd 47 10/30/15 2:41 PM
B48
LViWID M 16 T i I B048 B049 M i REBRAND O b 15 2015 9 26 AM
widia.com
WIDIA™ Victory™ • High-Performance Inserts
DCMT-FP
rst choice
alternate choice
ISO Carbide Inserts
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
DCMT070202FP 6,35 7,75 2,38 0,2 2,80
–
4170299
–
–
4168787
–
–
–
–
–
–
–
–
–
–
DCMT070204FP 6,35 7,75 2,38 0,4 2,80
4169995
4170300
–
4168764
4168788
–
–
4170089
–
–
–
–
–
–
–
DCMT070208FP 6,35 7,75 2,38 0,8 2,80
–
4170301
–
–
4168789
–
–
–
–
–
–
–
–
–
–
DCMT11T302FP 9,53 11,63 3,97 0,2 4,40
4169996
4170302
–
–
4168790
–
–
–
–
–
–
–
–
–
–
DCMT11T304FP 9,53 11,63 3,97 0,4 4,40
4169997
4170303
–
4168765
4168791
–
–
4170090
–
–
–
–
–
–
–
DCMT11T308FP 9,53 11,63 3,97 0,8 4,40
4169998
4170304
–
4168766
4168792
–
–
4170091
–
–
–
–
–
–
–
DCMT11T312FP 9,53 11,63 3,97 1,2 4,40
4169999
4170305
–
–
–
–
–
–
–
–
–
–
–
–
–
DCMT150404FP 12,70 15,50 4,76 0,4 5,50
4170000
4170306
–
–
4168793
–
–
–
–
–
–
–
–
–
–
DCMT150408FP 12,70 15,50 4,76 0,8 5,50
4170001
4170307
–
–
4168794
–
–
4170092
–
–
–
–
–
–
–
Inserts
DCMT-FW
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
DCMT11T304FW 9,53 11,63 3,97 0,2 4,40
5623482
–
–
5623483
–
–
–
–
–
–
–
–
–
–
–
DCMT11T308FW 9,53 11,63 3,97 0,8 4,40
5623486
–
–
5623487
–
–
–
–
–
–
–
–
–
–
–
P
M
K
N
S
H
WID_Master16_Turning_Inserts_B048_B049_Metric_REBRAND.indd 48 10/30/15 2:42 PM
B49
LViWID M 16 T i I B048 B049 M i REBRANDO b 15 20159 26AM
WIDIA™ Victory™ • High-Performance Inserts
P
M
K
N
S
H
rst choice
alternate choice
ISO Carbide Inserts
DCMT-MP
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
DCMT11T304MP 9,53 11,63 3,97 0,4 4,40
4170201
4170223
–
–
–
–
–
4170242
–
–
–
–
–
–
–
DCMT11T308MP 9,53 11,63 3,97 0,8 4,40
4170202
4170224
–
4168898
4168912
–
–
4170243
–
–
–
–
–
–
–
DCMT11T312MP 9,53 11,63 3,97 1,2 4,40
4170213
4170225
–
–
–
–
–
–
–
–
–
–
–
–
–
Inserts
DCMT-MU
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
DCMT11T304MU 9,53 11,63 3,97 0,4 4,40
5623585
5623583
–
–
5623581
–
5623586
5623587
5623582
5623584
–
–
–
–
–
DCMT11T308MU 9,52 11,63 3,97 0,8 4,40
5623600
–
–
–
5623588
–
5623602
5623589
5623601
5623603
–
–
–
–
–
DCMT150408MU 12,70 15,50 4,76 0,8 5,50
5623606
5623608
–
–
5623604
–
5623605
5623607
5623609
5623610
–
–
–
–
–
DCMT150412MU 12,70 15,50 4,76 1,2 5,50
–
–
–
–
–
–
5623611
5623612
–
–
–
–
–
–
–
C2–C49 C50–C81 C86–C129 B8–B25 B26–B28 B30–B105
WID_Master16_Turning_Inserts_B048_B049_Metric_REBRAND.indd 49 10/30/15 2:42 PM
B50
LViWID M 16 T i I B050 B051 M i REBRAND N b 11 2015 10 30 AM
widia.com
WIDIA™ Victory™ • High-Performance Inserts
rst choice
alternate choice
ISO Carbide Inserts
DCMT-MW
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
DCMT11T304MW 9,52 11,63 3,97 0,2 4,40
5623484
5623485
–
–
–
–
–
–
–
–
–
–
–
–
–
DCMT11T308MW 9,53 11,63 3,97 0,8 4,40
5623488
5623489
–
–
–
–
–
–
–
–
–
–
–
–
–
Inserts
DCMX-18
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
DCMX11T302R18 9,53 11,63 3,97 0,2 4,30
–
–
–
–
–
–
–
–
–
–
–
2011507
–
–
–
DCMW
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
DCMW070204 6,35 7,75 2,38 0,4 2,80
–
–
–
–
–
–
4170471
4170375
–
–
–
2027966
–
–
–
DCMW11T304 9,53 11,63 3,97 0,4 4,40
–
–
–
–
–
–
4170472
4170376
–
–
–
2027967
–
–
–
DCMW150408 12,70 15,50 4,76 0,8 5,50
–
–
–
–
–
–
4170473
4170377
–
–
–
2031737
–
–
–
P
M
K
N
S
H
WID_Master16_Turning_Inserts_B050_B051_Metric_REBRAND.indd 50 11/11/15 5:37 PM
B51
LViWID M 16 T i I B050 B051 M i REBRANDN b 11 201510 30AM
WIDIA™ Victory™ • High-Performance Inserts
DNGG-FS
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
DNGG110402FS 9,52 11,63 4,76 0,2 3,81
–
–
–
–
–
–
–
–
5548670
5538206
5549947
–
–
–
–
DNGG110404FS 9,52 11,63 4,76 0,4 3,81
–
–
–
–
–
–
–
–
5548671
–
5549948
–
–
–
–
DNGG110408FS 9,52 11,63 4,76 0,8 3,81
–
–
–
–
–
–
–
–
5548672
–
5549949
–
–
–
–
DNGG150401FS 12,70 15,50 4,76 0,1 5,16
–
–
–
–
–
–
–
–
5548674
–
5549991
–
–
–
–
DNGG150402FS 12,70 15,50 4,76 0,2 5,16
–
–
–
–
–
–
–
–
5548673
–
5549990
–
–
–
–
DNGG150404FS 12,70 15,50 4,76 0,4 5,16
–
–
–
–
–
–
–
–
5548675
5538207
5549992
–
–
–
–
DNGG150408FS 12,70 15,50 4,76 0,8 5,16
–
–
–
–
–
–
–
–
5548676
5538208
5549993
–
–
–
–
DNGG150412FS 12,70 15,50 4,76 1,2 5,16
–
–
–
–
–
–
–
–
5548677
–
5549994
–
–
–
–
DNGG150604FS 12,70 15,50 6,35 0,4 5,16
–
–
–
–
–
–
–
–
5548678
5538209
5549995
–
–
–
–
DNGG150608FS 12,70 15,50 6,35 0,8 5,16
–
–
–
–
–
–
–
–
5548679
5538230
5549996
–
–
–
–
P
M
K
N
S
H
rst choice
alternate choice
ISO Carbide Inserts
Inserts
C2–C49 C50–C81 C86–C129 B8–B25 B26–B28 B30–B105
WID_Master16_Turning_Inserts_B050_B051_Metric_REBRAND.indd 51 11/11/15 5:37 PM
B52
LViWID M 16 T i I B052 B053 M i REBRAND O b 15 2015 9 26 AM
widia.com
WIDIA™ Victory™ • High-Performance Inserts
DNGP
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
DNGP150401 12,70 15,50 4,76 0,1 5,16
–
–
–
–
–
–
–
–
5549191
–
–
–
–
–
–
DNGP150402 12,70 15,50 4,76 0,2 5,16
–
–
–
–
–
–
–
–
5549192
–
–
–
–
–
–
DNGP150404 12,70 15,50 4,76 0,4 5,16
–
–
–
–
–
–
–
–
5549193
–
5549209
–
–
–
–
DNGP150408 12,70 15,50 4,76 0,8 5,16
–
–
–
–
–
–
–
–
5549194
–
5549210
–
–
–
–
rst choice
alternate choice
ISO Carbide Inserts
Inserts
P
M
K
N
S
H
DNMA
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
DNMA110408 9,53 11,63 4,76 0,8 3,81
–
–
–
–
–
–
4171634
4171873
–
–
–
–
–
–
–
DNMA110412 9,53 11,63 4,76 1,2 3,81
–
–
–
–
–
–
–
4171874
–
–
–
–
–
–
–
DNMA150408 12,70 15,50 4,76 0,8 5,16
–
–
–
–
–
–
4171635
4171875
–
–
–
–
–
–
–
DNMA150412 12,70 15,50 4,76 1,2 5,16
–
–
–
–
–
–
4171636
4171876
–
–
–
–
–
–
–
DNMA150416 12,70 15,50 4,76 1,6 5,16
–
–
–
–
–
–
–
4171877
–
–
–
–
–
–
–
DNMA150608 12,70 15,50 6,35 0,8 5,16
–
–
–
–
–
–
4171637
4171878
–
–
–
–
–
–
–
DNMA150612 12,70 15,50 6,35 1,2 5,16
–
–
–
–
–
–
4171638
4171879
–
–
–
–
–
–
–
DNMA150616 12,70 15,50 6,35 1,6 5,16
–
–
–
–
–
–
–
4171880
–
–
–
–
–
–
–
WID_Master16_Turning_Inserts_B052_B053_Metric_REBRAND.indd 52 10/30/15 2:42 PM
B53
LViWID M 16 T i I B052 B053 M i REBRANDO b 15 20159 26AM
WIDIA™ Victory™ • High-Performance Inserts
P
M
K
N
S
H
rst choice
alternate choice
ISO Carbide Inserts
Inserts
DNMG-22
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
DNMG11040822 9,53 11,63 4,76 0,8 3,81
–
–
–
–
–
–
–
–
–
–
–
–
–
–
2022221
DNMG-CT
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
DNMG150604CT 12,70 15,50 6,35 0,3 5,16
–
–
–
4171742
4172699
–
–
–
–
–
–
–
–
–
–
DNMG150608CT 12,70 15,50 6,35 0,8 5,16
–
–
–
4171753
4172700
–
–
–
–
–
–
–
–
–
–
DNMG150612CT 12,70 15,50 6,35 1,1 5,16
–
–
–
4171754
4172701
–
–
–
–
–
–
–
–
–
–
C2–C49 C50–C81 C86–C129 B8–B25 B26–B28 B30–B105
WID_Master16_Turning_Inserts_B052_B053_Metric_REBRAND.indd 53 10/30/15 2:42 PM
B54
LViWID M 16 T i I B054 B055 M i REBRAND O b 15 2015 9 26 AM
widia.com
WIDIA™ Victory™ • High-Performance Inserts
DNMG-FF
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
DNMG110404FF 9,53 11,63 4,76 0,4 3,81
4171028
–
–
–
4172348
–
–
4171321
5684273
–
–
–
–
–
–
DNMG110408FF 9,53 11,63 4,76 0,8 3,81
4171029
–
–
–
4172349
–
–
4171322
–
–
–
–
–
–
–
DNMG110412FF 9,53 11,63 4,76 1,2 3,81
–
–
–
–
4172350
–
–
–
–
–
–
–
–
–
–
DNMG150404FF 12,70 15,50 4,76 0,4 5,16
4171030
–
–
–
4172351
–
–
–
5684274
–
–
–
–
–
–
DNMG150408FF 12,70 15,50 4,76 0,8 5,16
4171031
–
–
–
4172352
–
–
4171373
5684275
–
–
–
–
–
–
DNMG150412FF 12,70 15,50 4,76 1,2 5,16
–
–
–
–
–
–
–
4171374
–
–
–
–
–
–
–
DNMG150604FF 12,70 15,50 6,35 0,4 5,16
4171032
–
–
–
4172683
–
–
4171375
5684276
–
–
–
–
–
–
DNMG150608FF 12,70 15,50 6,35 0,8 5,16
4171043
–
–
–
4172684
–
–
4171376
–
–
–
–
–
–
–
DNMG150612FF 12,70 15,50 6,35 1,2 5,16
4171044
–
–
–
4172685
–
–
4171377
–
–
–
–
–
–
–
P
M
K
N
S
H
rst choice
alternate choice
ISO Carbide Inserts
Inserts
WID_Master16_Turning_Inserts_B054_B055_Metric_REBRAND.indd 54 10/30/15 2:42 PM
B55
LViWID M 16 T i I B054 B055 M i REBRANDO b 15 20159 26AM
DNMG-FW
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
DNMG110404FW 9,53 11,63 4,76 0,4 3,81
5623490
–
–
–
–
–
–
–
–
–
–
–
–
–
–
DNMG110408FW 9,53 11,63 4,76 0,8 3,81
5623491
–
–
–
–
–
–
–
–
–
–
–
–
–
–
DNMG150404FW 12,70 15,50 4,76 0,4 5,16
5623492
–
–
4171758
4173105
–
4171685
–
–
–
–
–
–
–
–
DNMG150408FW 12,70 15,50 4,76 0,4 5,16
5623493
–
–
4171759
4173106
–
4171686
–
–
–
–
–
–
–
–
DNMG150604FW 12,70 15,50 6,35 0,4 5,16
5623496
–
–
4171760
4173107
–
4171689
–
–
–
–
–
–
–
–
DNMG150608FW 12,70 15,50 6,35 0,4 5,16
5623497
–
–
4171761
4173108
–
4171690
–
–
–
–
–
–
–
–
P
M
K
N
S
H
rst choice
alternate choice
WIDIA™ Victory™ • High-Performance Inserts
ISO Carbide Inserts
Inserts
C2–C49 C50–C81 C86–C129 B8–B25 B26–B28 B30–B105
WID_Master16_Turning_Inserts_B054_B055_Metric_REBRAND.indd 55 10/30/15 2:42 PM
B56
LViWID M 16 T i I B056 B057 M i REBRAND O b 15 2015 9 27 AM
widia.com
WIDIA™ Victory™ • High-Performance Inserts
DNMG-ML
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
DNMG110404ML 9,53 11,63 4,76 0,4 3,81
4171062
4170461
–
–
–
–
4171660
4171394
–
–
–
–
–
–
–
DNMG110408ML 9,53 11,63 4,76 0,8 3,81
4171063
4170462
–
–
–
–
4171661
4171395
–
–
–
–
–
–
–
DNMG110412ML 9,53 11,63 4,76 1,2 3,81
4171064
–
–
–
–
–
–
–
–
–
–
–
–
–
–
DNMG150404ML 12,70 15,50 4,76 0,4 5,16
4171065
4170483
–
–
–
–
4171662
4171396
–
–
–
–
–
–
–
DNMG150408ML 12,70 15,50 4,76 0,8 5,16
4171066
4170484
–
–
–
–
4171663
4171397
–
–
–
–
–
–
–
DNMG150412ML 12,70 15,50 4,76 1,2 5,16
4171067
–
–
–
–
–
4171664
4171398
–
–
–
–
–
–
–
DNMG150604ML 12,70 15,50 6,35 0,4 5,16
4171068
4170485
–
–
–
–
4171665
4171399
–
–
–
–
–
–
–
DNMG150608ML 12,70 15,50 6,35 0,8 5,16
4171069
4170486
–
–
–
–
4171666
4171400
–
–
–
–
–
–
–
DNMG150612ML 12,70 15,50 6,35 1,2 5,16
4171070
4170487
–
–
–
–
4171667
4171401
–
–
–
–
–
–
–
P
M
K
N
S
H
rst choice
alternate choice
ISO Carbide Inserts
Inserts
WID_Master16_Turning_Inserts_B056_B057_Metric_REBRAND.indd 56 10/30/15 2:42 PM
B57
LViWID M 16 T i I B056 B057 M i REBRANDO b 15 20159 27AM
WIDIA™ Victory™ • High-Performance Inserts
DNMG-MR
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
DNMG110408MR 9,53 11,63 4,76 0,8 3,81
4171139
4170564
4170050
–
–
–
–
–
–
–
–
–
–
–
–
DNMG150404MR 12,70 15,50 4,76 0,4 5,16
4171140
4170565
4170051
–
–
–
–
–
–
–
–
–
–
–
–
DNMG150408MR 12,70 15,50 4,76 0,8 5,16
4171141
4170566
4170052
–
–
–
–
–
–
–
–
–
–
–
–
DNMG150412MR 12,70 15,50 4,76 1,2 5,16
4171142
4170567
4170053
–
–
–
–
–
–
–
–
–
–
–
–
DNMG150604MR 12,70 15,50 6,35 0,4 5,16
4171143
4170568
4170054
–
–
–
–
–
–
–
–
–
–
–
–
DNMG150608MR 12,70 15,50 6,35 0,8 5,16
4171144
4170569
4170055
–
4173023
4173138
–
–
–
–
–
–
–
–
–
DNMG150612MR 12,70 15,50 6,35 1,2 5,16
4171145
4170570
4170056
–
4173024
4173139
–
–
–
–
–
–
–
–
–
P
M
K
N
S
H
rst choice
alternate choice
ISO Carbide Inserts
Inserts
C2–C49 C50–C81 C86–C129 B8–B25 B26–B28 B30–B105
WID_Master16_Turning_Inserts_B056_B057_Metric_REBRAND.indd 57 10/30/15 2:42 PM
B58
LViWID M 16 T i I B058 B059 M i REBRAND N b 11 2015 10 31 AM
widia.com
DNMG-MW
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
DNMG150408MW 12,70 15,50 4,76 0,4 5,16
5623494
5623495
–
–
4173114
–
4171687
–
–
–
–
–
–
–
–
DNMG150412MW 12,70 15,50 4,76 1,2 5,16
–
–
–
–
4173115
–
4171688
–
–
–
–
–
–
–
–
DNMG150608MW 12,70 15,50 6,35 0,4 5,16
5623498
5623499
–
–
4173116
–
4171691
–
–
–
–
–
–
–
–
DNMG150612MW 12,70 15,50 6,35 1,2 5,16
–
–
–
–
4173117
–
4171692
–
–
–
–
–
–
–
–
DNMG-MS
WIDIA™ Victory™ • High-Performance Inserts
P
M
K
N
S
H
rst choice
alternate choice
ISO Carbide Inserts
Inserts
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
DNMG110408MS 9,53 11,63 4,76 0,8 3,81
–
–
–
–
–
–
–
–
5908769
5908770
5908781
–
–
–
–
DNMG150404MS 12,70 15,50 4,76 0,4 5,16
–
–
–
–
–
–
–
–
5908782
5908783
5908784
–
–
–
–
DNMG150408MS 12,70 15,50 4,76 0,8 5,16
–
–
–
–
–
–
–
–
5908785
5908787
5908788
–
–
–
–
DNMG150412MS 12,70 15,50 4,76 1,2 5,16
–
–
–
–
–
–
–
–
5908789
5908790
5908791
–
–
–
–
DNMG150604MS 12,70 15,50 6,35 0,4 5,16
–
–
–
–
–
–
–
–
5908792
5908793
5908794
–
–
–
–
DNMG150608MS 12,70 15,50 6,35 0,8 5,16
–
–
–
–
–
–
–
–
5908795
5908796
5908797
–
–
–
–
DNMG150612MS 12,70 15,50 6,35 1,2 5,16
–
–
–
–
–
–
–
–
5908798
5908799
5908800
–
–
–
–
WID_Master16_Turning_Inserts_B058_B059_Metric_REBRAND.indd 58 11/11/15 5:37 PM
B59
LViWID M 16 T i I B058 B059 M i REBRANDN b 11 201510 31AM
DNMG-RH
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
DNMG150408RH 12,70 15,50 4,76 0,8 5,16
4170989
4171524
4171707
–
4173045
–
–
4171912
–
–
–
–
–
–
–
DNMG150412RH 12,70 15,50 4,76 1,2 5,16
4170990
4171525
4171708
–
–
–
–
4171913
–
–
–
–
–
–
–
DNMG150608RH 12,70 15,50 6,35 0,8 5,16
4170991
4171526
4171709
–
4173046
–
–
4171914
–
–
–
–
–
–
–
DNMG150612RH 12,70 15,50 6,35 1,2 5,16
4170992
4171527
4171710
–
4173047
–
–
4171915
–
–
–
–
–
–
–
DNMG150616RH 12,70 15,50 6,35 1,6 5,16
4170993
4171528
4171711
–
4173048
–
–
4171916
–
–
–
–
–
–
–
DNMG190612RH 15,88 19,38 6,35 1,2 6,35
4170994
4171529
4171712
–
–
–
–
–
–
–
–
–
–
–
–
P
M
K
N
S
H
rst choice
alternate choice
WIDIA™ Victory™ • High-Performance Inserts
ISO Carbide Inserts
Inserts
C2–C49 C50–C81 C86–C129 B8–B25 B26–B28 B30–B105
WID_Master16_Turning_Inserts_B058_B059_Metric_REBRAND.indd 59 11/11/15 5:37 PM
B60
LViWID M 16 T i I B060 B061 M i REBRAND O b 15 2015 9 27 AM
widia.com
WIDIA™ Victory™ • High-Performance Inserts
DNMG-UF
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
DNMG110404UF 9,53 11,63 4,76 0,4 3,81
–
–
–
4169356
4169382
–
–
–
5645603
–
–
–
–
–
–
DNMG110408UF 9,53 11,63 4,76 0,8 3,81
–
–
–
4169357
4169383
–
–
–
5645604
–
–
–
–
–
–
DNMG150404UF 12,70 15,50 4,76 0,4 5,16
–
–
–
4169358
4169384
–
–
–
5645601
–
–
–
–
–
–
DNMG150408UF 12,70 15,50 4,76 0,8 5,16
5645606
5645605
–
4169359
4169385
–
–
–
5645602
–
–
–
–
–
–
DNMG150412UF 12,70 15,50 4,76 1,2 5,16
–
–
–
4169360
4169386
–
–
–
–
–
–
–
–
–
–
DNMG150604UF 12,70 15,50 6,35 0,4 5,16
–
–
–
4169361
4169387
–
–
–
5645608
–
–
–
–
–
–
DNMG150608UF 12,70 15,50 6,35 0,8 5,16
–
5645609
–
4169362
4169388
–
–
–
5645607
–
–
–
–
–
–
DNMG150612UF 12,70 15,50 6,35 1,2 5,16
–
–
–
4169363
4169389
–
–
–
–
–
–
–
–
–
–
P
M
K
N
S
H
rst choice
alternate choice
ISO Carbide Inserts
Inserts
WID_Master16_Turning_Inserts_B060_B061_Metric_REBRAND.indd 60 10/30/15 2:43 PM
B61
LViWID M 16 T i I B060 B061 M i REBRANDO b 15 20159 27AM
WIDIA™ Victory™ • High-Performance Inserts
DNMG-UM
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
DNMG110404UM 9,53 11,63 4,76 0,4 3,81
–
–
–
4172337
4172383
4172413
–
–
–
–
–
–
–
–
–
DNMG110408UM 9,53 11,63 4,76 0,8 3,81
–
–
–
4172338
4172384
4172414
–
–
5645256
–
–
–
–
–
–
DNMG110412UM 9,53 11,63 4,76 1,2 3,81
–
–
–
4172339
4172385
4172415
–
–
–
–
–
–
–
–
–
DNMG150404UM 12,70 15,50 4,76 0,4 5,16
–
–
–
4172340
4172386
4172416
–
–
5645254
–
–
–
–
–
–
DNMG150408UM 12,70 15,50 4,76 0,8 5,16
5645260
5645261
–
4172341
4172387
4172417
–
–
5645251
–
–
–
–
–
–
DNMG150412UM 12,70 15,50 4,76 1,2 5,16
–
–
–
4172342
4172388
4172418
–
–
5645259
–
–
–
–
–
–
DNMG150604UM 12,70 15,50 6,35 0,4 5,16
–
–
–
4172363
4172389
4172419
–
–
5645255
–
–
–
–
–
–
DNMG150608UM 12,70 15,50 6,35 0,8 5,16
–
5645262
–
4172364
4172390
4172420
–
–
5645253
5645264
–
–
–
–
–
DNMG150612UM 12,70 15,50 6,35 1,2 5,16
–
–
–
4172365
4172391
4172421
–
–
5645258
5645257
–
–
–
–
–
DNMG150616UM 12,70 15,50 6,35 1,6 5,16
–
–
–
–
4172392
4172422
–
–
–
–
–
–
–
–
–
P
M
K
N
S
H
rst choice
alternate choice
ISO Carbide Inserts
Inserts
C2–C49 C50–C81 C86–C129 B8–B25 B26–B28 B30–B105
WID_Master16_Turning_Inserts_B060_B061_Metric_REBRAND.indd 61 10/30/15 2:43 PM
B62
LViWID M 16 T i I B062 B063 M i REBRAND O b 15 2015 9 28 AM
widia.com
DNMM-65
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
DNMM15060865 12,70 15,50 6,35 0,8 5,16
5698413
5698414
5698415
–
5698412
–
–
–
–
–
–
–
–
–
–
DNMM15061265 12,70 15,50 6,35 1,2 5,16
5698417
–
–
–
5698416
–
–
–
–
–
–
–
–
–
–
DNMM15061665 12,70 15,50 6,35 1,6 5,16
5698418
5698419
–
–
–
–
–
–
–
–
–
–
–
–
–
WIDIA™ Victory™ • High-Performance Inserts
P
M
K
N
S
H
rst choice
alternate choice
ISO Carbide Inserts
DNMG-UR
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
DNMG110408UR 9,53 11,63 4,76 0,8 3,81
4171101
4170509
4169966
4169424
4169453
4169488
–
4171426
–
–
–
–
–
–
–
DNMG110412UR 9,53 11,63 4,76 1,2 3,81
4171102
4170510
–
4169425
–
–
–
4171427
–
–
–
–
–
–
–
DNMG150408UR 12,70 15,50 4,76 0,8 5,16
4171103
4170511
4169967
4169426
4169454
4169489
–
4171428
–
5579271
–
–
–
–
–
DNMG150412UR 12,70 15,50 4,76 1,2 5,16
4171104
4170512
4169968
–
4169455
4169490
–
4171429
–
5579292
–
–
–
–
–
DNMG150416UR 12,70 15,50 4,76 1,6 5,16
–
–
–
–
–
4169491
–
4171430
5680171
–
–
–
–
–
–
DNMG150608UR 12,70 15,50 6,35 0,8 5,16
4171105
4170513
4169969
4169427
4169456
4169492
–
4171431
–
5579276
–
–
–
–
–
DNMG150612UR 12,70 15,50 6,35 1,2 5,16
4171106
4170514
4169970
4169428
4169457
4169493
5680172
4171432
–
–
–
–
–
–
–
DNMG150616UR 12,70 15,50 6,35 1,6 5,16
4171107
4170515
4169971
–
–
4169494
–
4171433
–
–
–
–
–
–
–
Inserts
WID_Master16_Turning_Inserts_B062_B063_Metric_REBRAND.indd 62 10/30/15 2:43 PM
B63
LViWID M 16 T i I B062 B063 M i REBRANDO b 15 20159 28AM
DNMP
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
DNMP150404 12,70 15,50 4,76 0,4 5,16
–
–
–
4171591
4173658
4173697
–
–
4172484
–
–
–
–
–
–
DNMP150408 12,70 15,50 4,76 0,8 5,16
–
–
–
4171592
4173659
4173698
–
–
4172485
–
–
–
–
–
–
DNMP150412 12,70 15,50 4,76 1,2 5,16
–
–
–
4172133
4173660
4173699
–
–
–
–
–
–
–
–
–
DNMP150604 12,70 15,50 6,35 0,4 5,16
–
–
–
4172134
4173661
4173700
–
–
4172486
–
–
–
–
–
–
DNMP150608 12,70 15,50 6,35 0,8 5,16
–
–
–
4172135
4173662
4173701
–
–
4172487
4172616
–
–
–
–
–
DNMP150612 12,70 15,50 6,35 1,2 5,16
–
–
–
4172136
4173663
4173702
–
–
4172488
4172617
–
–
–
–
–
NOTE: DNMP-style inserts are single sided.
rst choice
alternate choice
WIDIA™ Victory™ • High-Performance Inserts
P
M
K
N
S
H
ISO Carbide Inserts
Inserts
DPMT-FP
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
DPMT070204FP 6,35 7,75 2,38 0,4 2,80
4170020
4170330
–
4168816
4168828
–
–
–
–
–
–
–
–
–
–
DPMT11T304FP 9,53 11,63 3,97 0,4 4,40
4170021
4170331
–
4168817
4168829
–
–
–
–
–
–
–
–
–
–
DPMT11T308FP 9,53 11,63 3,97 0,8 4,40
4170022
4170332
–
–
4168830
–
–
4170109
–
–
–
–
–
–
–
D55°
RεL10
11°
C2–C49 C50–C81 C86–C129 B8–B25 B26–B28 B30–B105
WID_Master16_Turning_Inserts_B062_B063_Metric_REBRAND.indd 63 10/30/15 2:43 PM
B64
LViWID M 16 T i I B064 B065 M i REBRAND O b 15 2015 9 28 AM
widia.com
LNUX-EN95
ISO
catalogue number W LI S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
LNUX400924EN95 25,40 40,00 9,53 2,4 9,12
–
–
–
–
–
–
–
–
–
–
–
–
–
2012231
–
WIDIA™ Victory™ • High-Performance Inserts
DPMT-MP
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
DPMT11T308MP 9,53 11,63 3,97 0,8 4,40
–
4170260
–
–
–
–
–
4170268
–
–
–
–
–
–
–
P
M
K
N
S
H
rst choice
alternate choice
ISO Carbide Inserts
D55°
RεL10
11°
Inserts
LNUX-13
ISO
catalogue number W LI S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
LNUX19194013 10,00 19,05 19,05 4,0 6,35
–
–
–
–
–
–
–
4170966
–
–
–
–
–
–
–
LNUX30194013 12,00 30,00 19,05 4,0 6,35
–
–
–
–
–
–
–
4170968
–
–
–
–
–
–
–
WID_Master16_Turning_Inserts_B064_B065_Metric_REBRAND.indd 64 10/30/15 2:43 PM
B65
LViWID M 16 T i I B064 B065 M i REBRANDO b 15 20159 28AM
LNUX-T
ISO
catalogue number W LI S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
LNUX191940T 10,00 19,05 19,05 4,0 6,35
–
–
–
–
–
–
–
4170967
–
–
–
–
–
–
–
LNUX301940T 12,00 30,00 19,05 4,0 6,35
–
–
–
–
–
–
–
4170969
–
–
–
–
–
–
–
rst choice
alternate choice
WIDIA™ Victory™ • High-Performance Inserts
P
M
K
N
S
H
ISO Carbide Inserts
Inserts
RCMT
ISO
catalogue number D S D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
RCMT0602M0 6,00 2,38 2,80
4169975
4170536
–
–
–
–
–
4170478
–
–
–
2028115
–
–
–
RCMT0803M0 8,00 3,18 3,40
4169976
4170537
–
–
–
–
–
4170479
–
–
–
2028129
–
–
–
RCMT10T3M0 10,00 3,97 4,40
4169977
4170538
4170752
–
–
–
–
4170480
–
–
–
2028143
–
2028145
–
RCMT1204M0 12,00 4,76 4,40
4169978
4170539
4170803
–
–
–
–
4170481
–
–
–
2028157
–
–
–
RCMT1606M0 16,00 6,35 5,50
4169979
–
4170804
–
–
–
–
4170482
–
–
–
–
–
–
–
RCMT-43
ISO
catalogue number D S D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
RCMT1606M043 16,00 6,35 5,50
–
–
–
–
–
–
–
–
–
–
–
2028170
–
–
–
C2–C49 C50–C81 C86–C129 B8–B25 B26–B28 B30–B105
WID_Master16_Turning_Inserts_B064_B065_Metric_REBRAND.indd 65 10/30/15 2:43 PM
B66
LViWID M 16 T i I B066 B067 M i REBRAND O b 15 2015 9 28 AM
widia.com
WIDIA™ Victory™ • High-Performance Inserts
ISO Carbide Inserts
RCMT-T
ISO
catalogue number D S D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
RCMT1606M0T 16,00 6,35 5,50
–
4170540
–
–
–
–
–
–
–
–
–
–
–
–
–
rst choice
alternate choice
P
M
K
N
S
H
Inserts
RCMX
ISO
catalogue number D S D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
RCMX2006M0T 20,00 6,35 6,50
4169980
4170541
4170805
–
–
–
–
4170543
–
–
–
–
–
–
–
RCMX2507M0T 25,00 7,94 7,40
4169981
4170542
4170806
–
–
–
–
4170544
–
–
–
–
–
2028196
–
RCMX3209M0T 32,00 9,53 9,50
4169982
–
–
–
–
–
–
–
–
–
–
–
–
–
–
WID_Master16_Turning_Inserts_B066_B067_Metric_REBRAND.indd 66 10/30/15 2:43 PM
B67
LViWID M 16 T i I B066 B067 M i REBRANDO b 15 20159 28AM
RNMA
ISO
catalogue number D S D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
RNMA120400 12,70 4,76 5,16
–
–
–
–
–
–
4171639
4171881
–
–
–
–
–
–
–
WIDIA™ Victory™ • High-Performance Inserts
ISO Carbide Inserts
Inserts
RNMG-RH
ISO
catalogue number D S D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
RNMG090300RH 9,53 3,18 3,81
4170995
4171530
–
–
–
–
–
–
–
–
–
–
–
–
–
RNMG120400RH 12,70 4,76 5,16
4170996
4171531
4171713
–
–
–
–
–
–
–
–
–
–
–
–
RNMG190600RH 19,05 6,35 7,93
4170997
4171532
4171714
–
–
–
–
4171917
–
–
–
–
–
–
–
rst choice
alternate choice
P
M
K
N
S
H
C2–C49 C50–C81 C86–C129 B8–B25 B26–B28 B30–B105
WID_Master16_Turning_Inserts_B066_B067_Metric_REBRAND.indd 67 10/30/15 2:43 PM
B68
LViWID M 16 T i I B068 B069 M i REBRAND N b 11 2015 10 32 AM
widia.com
SCMT
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
SCMT090304 9,53 9,53 3,18 0,4 4,40
–
–
–
–
–
–
–
–
–
–
–
–
–
2028225
–
SCMT09T304 9,53 9,53 3,97 0,4 4,40
–
–
–
–
–
–
–
–
–
–
–
2028255
–
–
–
SCMT09T308 9,53 9,53 3,97 0,8 4,40
–
–
–
–
–
–
–
–
–
–
–
2028270
–
2028272
–
SCMT120408 12,70 12,70 4,76 0,8 5,50
–
–
–
–
–
–
–
–
–
–
–
2028286
–
2028289
–
SCMT120412 12,70 12,70 4,76 1,2 5,50
–
–
–
–
–
–
–
–
–
–
–
2028296
–
–
2028295
SCMT150512 15,88 15,88 5,56 1,2 5,50
–
–
–
–
–
–
–
–
–
–
–
2028306
–
2028307
–
rst choice
alternate choice
WIDIA™ Victory™ • High-Performance Inserts
P
M
K
N
S
H
ISO Carbide Inserts
SCMT-FP
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
SCMT09T304FP 9,53 9,53 3,97 0,4 4,40
4170002
4170308
–
4168767
4168795
–
–
4170093
–
–
–
–
–
–
–
SCMT09T308FP 9,53 9,53 3,97 0,8 4,40
4170003
4170309
–
4168768
4168796
–
–
4170094
–
–
–
–
–
–
–
SCMT120404FP 12,70 12,70 4,76 0,4 5,50
–
4170310
–
–
4168797
–
–
–
–
–
–
–
–
–
–
SCMT120408FP 12,70 12,70 4,76 0,8 5,50
4170004
4170311
–
4168769
4168798
–
–
4170095
–
–
–
–
–
–
–
SCMT120412FP 12,70 12,70 4,76 1,2 5,50
4170005
4170312
–
–
4168799
–
–
4170096
–
–
–
–
–
–
–
Inserts
WID_Master16_Turning_Inserts_B068_B069_Metric_REBRAND.indd 68 11/11/15 5:37 PM
B69
LViWID M 16 T i I B068 B069 M i REBRANDN b 11 201510 32AM
WIDIA™ Victory™ • High-Performance Inserts
SCMT-MP
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
SCMT09T304MP 9,53 9,53 3,97 0,4 4,40
–
4170226
–
4168899
4168913
–
–
4170244
–
–
–
–
–
–
–
SCMT09T308MP 9,53 9,53 3,97 0,8 4,40
4170214
4170227
–
4168900
4168914
–
–
4170245
–
–
–
–
–
–
–
SCMT120404MP 12,70 12,70 4,76 0,4 5,50
–
4170228
–
4168901
4168915
–
–
4170246
–
–
–
–
–
–
–
SCMT120408MP 12,70 12,70 4,76 0,8 5,50
4170215
4170229
–
4168902
4168916
–
–
4170247
–
–
–
–
–
–
–
SCMT120412MP 12,70 12,70 4,76 1,2 5,50
–
4170230
–
4168903
4168917
–
–
4170248
–
–
–
–
–
–
–
P
M
K
N
S
H
rst choice
alternate choice
ISO Carbide Inserts
Inserts
SCMT-MU
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
SCMT090308MU 9,53 9,53 3,18 0,8 4,40
5623446
–
–
–
–
–
–
5623445
–
–
–
–
–
–
–
SCMT09T304MU 9,53 9,53 3,97 0,4 4,40
–
–
–
–
5623447
–
–
–
–
–
–
–
–
–
–
SCMT09T308MU 9,53 9,53 3,97 0,8 4,40
5623461
5623464
5623462
–
5623448
–
–
5623449
5623460
–
–
–
–
–
–
C2–C49 C50–C81 C86–C129 B8–B25 B26–B28 B30–B105
WID_Master16_Turning_Inserts_B068_B069_Metric_REBRAND.indd 69 11/11/15 5:37 PM
B70
LViWID M 16 T i I B070 B071 M i REBRAND N b 11 2015 10 33 AM
widia.com
WIDIA™ Victory™ • High-Performance Inserts
SCMW
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
SCMW090304 9,53 9,53 3,18 0,4 4,40
–
–
–
–
–
–
4170474
4170378
–
–
–
2028308
–
–
–
SCMW09T308 9,53 9,53 3,97 0,8 4,40
–
–
–
–
–
–
–
4170379
–
–
–
–
–
–
–
SCMW120408 12,70 12,70 4,76 0,8 5,50
–
–
–
–
–
–
4170475
4170380
–
–
–
2028310
–
–
–
P
M
K
N
S
H
rst choice
alternate choice
ISO Carbide Inserts
Inserts
SNGG-FS
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
SNGG120408FS 12,70 12,70 4,76 0,8 5,16
–
–
–
–
–
–
–
–
5548680
–
5549997
–
–
–
–
WID_Master16_Turning_Inserts_B070_B071_Metric_REBRAND.indd 70 11/11/15 5:37 PM
B71
LViWID M 16 T i I B070 B071 M i REBRANDN b 11 201510 33AM
WIDIA™ Victory™ • High-Performance Inserts
SNMA
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
SNMA120408 12,70 12,70 4,76 0,8 5,16
–
–
–
–
–
–
4171640
4171882
–
–
–
2028371
–
–
–
SNMA120412 12,70 12,70 4,76 1,2 5,16
–
–
–
–
–
–
4171641
4171883
–
–
–
–
–
–
–
SNMA120416 12,70 12,70 4,76 1,6 5,16
–
–
–
–
–
–
4171642
4171884
–
–
–
–
–
–
–
SNMA150608 15,88 15,88 6,35 0,8 6,35
–
–
–
–
–
–
–
4171885
–
–
–
–
–
–
–
SNMA150612 15,88 15,88 6,35 1,2 6,35
–
–
–
–
–
–
4171643
4171886
–
–
–
–
–
–
–
SNMA150616 15,88 15,88 6,35 1,6 6,35
–
–
–
–
–
–
4171644
4171887
–
–
–
–
–
–
–
SNMA190612 19,05 19,05 6,35 1,2 7,93
–
–
–
–
–
–
4171645
4171888
–
–
–
–
–
–
–
SNMA190616 19,05 19,05 6,35 1,6 7,93
–
–
–
–
–
–
4171646
4171889
–
–
–
–
–
–
–
P
M
K
N
S
H
rst choice
alternate choice
ISO Carbide Inserts
Inserts
SNMG
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
SNMG250924 25,40 25,40 9,53 2,4 9,12
–
–
5091303
–
–
–
–
–
–
–
–
–
–
–
–
C2–C49 C50–C81 C86–C129 B8–B25 B26–B28 B30–B105
WID_Master16_Turning_Inserts_B070_B071_Metric_REBRAND.indd 71 11/11/15 5:37 PM
B72
LViWID M 16 T i I B072 B073 M i REBRAND N b 11 2015 10 35 AM
widia.com
WIDIA™ Victory™ • High-Performance Inserts
SNMG-FF
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
SNMG090304FF 9,53 9,53 3,18 0,4 3,81
4171045
–
–
–
–
–
–
4171378
5684279
–
–
–
–
–
–
SNMG090308FF 9,53 9,53 3,18 0,8 3,81
4171046
–
–
–
4172686
–
–
4171379
5684277
–
–
–
–
–
–
SNMG120404FF 12,70 12,70 4,76 0,4 5,16
4171047
–
–
–
4172687
–
–
4171380
5684330
–
–
–
–
–
–
SNMG120408FF 12,70 12,70 4,76 0,8 5,16
4171048
–
–
–
4172688
–
–
4171381
5684278
–
–
–
–
–
–
SNMG120412FF 12,70 12,70 4,76 1,2 5,16
4171049
–
–
–
4172689
–
–
4171382
–
–
–
–
–
–
–
SNMG120416FF 12,70 12,70 4,76 1,6 5,16
–
–
–
–
4172690
–
–
–
–
–
–
–
–
–
–
P
M
K
N
S
H
rst choice
alternate choice
ISO Carbide Inserts
Inserts
SNMG-ML
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
SNMG090304ML 9,53 9,53 3,18 0,4 3,81
4171071
–
–
–
–
–
–
–
–
–
–
–
–
–
–
SNMG090308ML 9,53 9,53 3,18 0,8 3,81
4171072
4170488
–
–
–
–
4171668
4171402
–
–
–
–
–
–
–
SNMG120404ML 12,70 12,70 4,76 0,4 5,16
–
–
–
–
–
–
–
4171403
–
–
–
–
–
–
–
SNMG120408ML 12,70 12,70 4,76 0,8 5,16
4171073
4170489
–
–
–
–
4171669
4171404
–
–
–
–
–
–
–
SNMG120412ML 12,70 12,70 4,76 1,2 5,16
4171074
4170490
–
–
–
–
4171670
4171405
–
–
–
–
–
–
–
SNMG120416ML 12,70 12,70 4,76 1,6 5,16
–
–
–
–
–
–
–
4171406
–
–
–
–
–
–
–
WID_Master16_Turning_Inserts_B072_B073_Metric_REBRAND.indd 72 11/11/15 5:38 PM
B73
LViWID M 16 T i I B072 B073 M i REBRANDN b 11 201510 35AM
WIDIA™ Victory™ • High-Performance Inserts
SNMG-MR
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
SNMG120408MR 12,70 12,70 4,76 0,8 5,16
4171146
4170571
4170057
–
4173025
4173140
–
–
–
–
–
–
–
–
–
SNMG120412MR 12,70 12,70 4,76 1,2 5,16
5684354
5684355
–
–
4173026
4173141
–
–
–
–
–
–
–
–
–
SNMG120416MR 12,70 12,70 4,76 1,6 5,16
–
–
–
–
4173027
4173142
–
–
–
–
–
–
–
–
–
SNMG150608MR 15,88 15,88 6,35 0,8 6,35
–
–
–
–
4173028
4173143
–
–
–
–
–
–
–
–
–
SNMG150612MR 15,88 15,88 6,35 1,2 6,35
4171147
–
–
–
4173029
4173144
–
–
–
–
–
–
–
–
–
SNMG150616MR 15,88 15,88 6,35 1,6 6,35
–
–
–
–
4173030
4173145
–
–
–
–
–
–
–
–
–
SNMG190612MR 19,05 19,05 6,35 1,2 7,93
4171148
4170572
4170058
–
4173031
4173146
–
–
–
–
–
–
–
–
–
SNMG190616MR 19,05 19,05 6,35 1,6 7,93
4171149
–
–
–
4173032
4173147
–
–
–
–
–
–
–
–
–
P
M
K
N
S
H
rst choice
alternate choice
ISO Carbide Inserts
Inserts
SNMG-MS
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
SNMG120408MS 12,70 12,70 4,76 0,8 5,16
–
–
–
–
–
–
–
–
5908847
5908848
5908849
–
–
–
–
SNMG120412MS 12,70 12,70 4,76 1,2 5,16
–
–
–
–
–
–
–
–
5908850
5908921
5908922
–
–
–
–
SNMG150612MS 15,88 15,88 6,35 1,2 6,35
–
–
–
–
–
–
–
–
–
5908923
5908924
–
–
–
–
SNMG190612MS 19,05 19,05 6,35 1,2 7,94
–
–
–
–
–
–
–
–
5908925
5908926
–
–
–
–
–
C2–C49 C50–C81 C86–C129 B8–B25 B26–B28 B30–B105
WID_Master16_Turning_Inserts_B072_B073_Metric_REBRAND.indd 73 11/11/15 5:38 PM
B74
LViWID M 16 T i I B074 B075 M i REBRAND O b 15 2015 9 29 AM
widia.com
WIDIA™ Victory™ • High-Performance Inserts
SNMG-RH
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
SNMG120408RH 12,70 12,70 4,76 0,8 5,16
4170998
4171533
4171715
–
4173049
–
–
4171918
–
–
–
–
–
–
–
SNMG120412RH 12,70 12,70 4,76 1,2 5,16
4170999
4171534
4171716
–
4173050
–
–
4171919
–
–
–
–
–
–
–
SNMG120416RH 12,70 12,70 4,76 1,6 5,16
4171000
4171535
4171717
–
4173051
–
–
4171920
–
–
–
–
–
–
–
SNMG150608RH 15,88 15,88 6,35 0,8 6,35
4171001
4171536
4171718
–
4173052
–
–
4171921
–
–
–
–
–
–
–
SNMG150612RH 15,88 15,88 6,35 1,2 6,35
4171002
4171537
4171719
–
4173053
–
–
4171922
–
–
–
–
–
–
–
SNMG150616RH 15,88 15,88 6,35 1,6 6,35
4171003
4171538
4171720
–
4173054
–
–
4171923
–
–
–
–
–
–
–
SNMG190608RH 19,05 19,05 6,35 0,8 7,93
4171004
4171539
4171721
–
4173055
–
–
4171924
–
–
–
–
–
–
–
SNMG190612RH 19,05 19,05 6,35 1,2 7,93
4171005
4171540
4171722
–
4173056
–
–
4171925
–
–
–
–
–
–
–
SNMG190616RH 19,05 19,05 6,35 1,6 7,93
4171006
4171541
4171723
–
4173057
–
–
4171926
–
–
–
–
–
–
–
P
M
K
N
S
H
rst choice
alternate choice
ISO Carbide Inserts
Inserts
SNMG-UF
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
SNMG120404UF 12,70 12,70 4,76 0,4 5,16
–
–
–
4169364
4169390
–
–
–
5645610
–
–
–
–
–
–
SNMG120408UF 12,70 12,70 4,76 0,8 5,16
–
–
–
4169365
4169391
–
–
–
5645611
–
–
–
–
–
–
SNMG120412UF 12,70 12,70 4,76 1,2 5,16
–
–
–
4169366
4169392
–
–
–
–
–
–
–
–
–
–
WID_Master16_Turning_Inserts_B074_B075_Metric_REBRAND.indd 74 10/30/15 2:44 PM
B75
LViWID M 16 T i I B074 B075 M i REBRANDO b 15 20159 29AM
WIDIA™ Victory™ • High-Performance Inserts
SNMG-UM
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
SNMG120404UM 12,70 12,70 4,76 0,4 5,16
–
–
–
4172366
4172393
4172423
–
–
–
–
–
–
–
–
–
SNMG120408UM 12,70 12,70 4,76 0,8 5,16
–
–
–
4172367
4172394
4172424
–
–
–
–
–
–
–
–
–
SNMG120412UM 12,70 12,70 4,76 1,2 5,16
–
–
–
4172368
4172395
4172425
–
–
–
–
–
–
–
–
–
P
M
K
N
S
H
rst choice
alternate choice
ISO Carbide Inserts
Inserts
SNMG-UR
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
SNMG120408UR 12,70 12,70 4,76 0,8 5,16
4171108
4170516
4169989
4169429
4169458
4169495
–
4171434
–
–
–
–
–
–
–
SNMG120412UR 12,70 12,70 4,76 1,2 5,16
4171109
4170517
4169990
4169430
4169459
4169496
–
4171435
–
5579350
–
–
–
–
–
SNMG120416UR 12,70 12,70 4,76 1,6 5,16
4171110
–
–
–
4169460
4169497
–
4171436
5680174
5680173
–
–
–
–
–
SNMG150612UR 15,88 15,88 6,35 1,2 6,35
4171111
4170518
4169991
4169431
4169461
4169498
–
4171437
–
5579352
–
–
–
–
–
SNMG150616UR 15,88 15,88 6,35 1,6 6,35
4171112
4170519
4169992
4169432
4169462
4169499
–
4171438
–
–
–
–
–
–
–
SNMG190612UR 19,05 19,05 6,35 1,2 7,93
4171113
4170520
4170033
–
4169463
4169500
–
4171439
–
5512538
–
–
–
–
–
SNMG190616UR 19,05 19,05 6,35 1,6 7,93
4171114
4170521
4170034
–
4169464
4169501
–
4171440
–
5579357
–
–
–
–
–
SNMG190616UR 19,05 19,05 6,35 1,2 7,93
–
–
–
4169433
–
–
–
–
–
–
–
–
–
–
–
C2–C49 C50–C81 C86–C129 B8–B25 B26–B28 B30–B105
WID_Master16_Turning_Inserts_B074_B075_Metric_REBRAND.indd 75 10/30/15 2:44 PM
B76
LViWID M 16 T i I B076 B077 M i REBRAND O b 15 2015 9 30 AM
widia.com
WIDIA™ Victory™ • High-Performance Inserts
SNMM-65
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
SNMM12040865 12,70 12,70 4,76 0,8 5,16
–
5696554
5696555
–
5696553
–
–
–
–
–
–
–
–
–
–
SNMM12041265 12,70 12,70 4,76 1,2 5,16
–
5696557
–
–
5696556
–
–
–
–
–
–
–
–
–
–
SNMM15061665 15,88 15,88 6,35 1,6 6,35
–
5696559
–
–
5696558
–
–
–
–
–
–
–
–
–
–
SNMM19061265 19,05 19,05 6,35 1,2 7,93
5696611
5696612
5696613
–
5696610
–
–
–
–
–
–
–
–
–
–
SNMM19061665 19,05 19,05 6,35 1,6 7,93
5696615
–
–
–
5696614
–
–
–
–
–
–
–
–
–
–
SNMM19062465 19,05 19,05 6,35 2,4 7,93
–
5696617
–
–
5696616
–
–
–
–
–
–
–
–
–
–
P
M
K
N
S
H
rst choice
alternate choice
ISO Carbide Inserts
Inserts
SNMM-SR
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
SNMM190616SR 19,05 19,05 6,35 1,6 7,93
–
–
–
–
5696648
–
–
–
–
–
–
–
–
–
–
SNMM190624SR 19,05 19,05 6,35 2,4 7,93
5696680
5696681
–
–
5696649
–
–
–
–
–
–
–
–
–
–
WID_Master16_Turning_Inserts_B076_B077_Metric_REBRAND.indd 76 10/30/15 2:45 PM
B77
LViWID M 16 T i I B076 B077 M i REBRANDO b 15 20159 30AM
WIDIA™ Victory™ • High-Performance Inserts
P
M
K
N
S
H
rst choice
alternate choice
ISO Carbide Inserts
SNMP
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
SNMP120408 12,70 12,70 4,76 0,8 5,16
–
–
–
4172137
4173664
4173703
–
–
4172489
4172618
–
–
–
–
–
SNMP120412 12,70 12,70 4,76 1,2 5,16
–
–
–
4172138
4173665
4173704
–
–
4172490
4172619
–
–
–
–
–
SNMP150608 15,88 15,88 6,35 0,8 6,35
–
–
–
4172139
4173666
4173705
–
–
–
4172620
–
–
–
–
–
SNMP150612 15,88 15,88 6,35 1,2 6,35
–
–
–
4172140
4173667
4173706
–
–
–
4172621
–
–
–
–
–
SNMP150616 15,88 15,88 6,35 1,6 6,35
–
–
–
4172141
4173668
4173707
–
–
–
4172622
–
–
–
–
–
SNMP190616 19,05 19,05 6,35 1,6 7,93
–
–
–
4172142
4173669
4173708
–
–
–
–
–
–
–
–
–
Inserts
SNU
ISO
catalogue number D L10 S R¡
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
SNUN120408 12,70 12,70 4,76 0,8
–
–
–
–
–
–
–
4170962
–
–
–
–
–
–
–
SNUN120412 12,70 12,70 4,76 1,2
–
–
–
–
–
–
–
4170963
–
–
–
–
–
–
–
C2–C49 C50–C81 C86–C129 B8–B25 B26–B28 B30–B105
WID_Master16_Turning_Inserts_B076_B077_Metric_REBRAND.indd 77 10/30/15 2:45 PM
B78
LViWID M 16 T i I B078 B079 M i REBRAND O b 15 2015 9 30 AM
widia.com
WIDIA™ Victory™ • High-Performance Inserts
SPG
ISO
catalogue number D L10 S R¡
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
SPGN090308 9,53 9,53 3,18 0,8
–
–
–
–
–
–
–
4170943
–
–
–
–
–
–
–
SPGN120308 12,70 12,70 3,18 0,8
–
–
–
–
–
–
–
4170944
–
–
–
–
–
–
–
SPGN120312 12,70 12,70 3,18 1,2
–
–
–
–
–
–
–
4170945
–
–
–
–
–
–
–
P
M
K
N
S
H
rst choice
alternate choice
ISO Carbide Inserts
Inserts
SPMR
ISO
catalogue number D L10 S R¡
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
SPMR090308 9,53 9,53 3,18 0,8
–
–
4170650
–
–
–
–
4170946
–
–
–
–
–
–
–
SPMR120304 12,70 12,70 3,18 0,4
4170853
–
4170651
–
–
–
–
4170947
–
–
–
–
–
–
–
SPMR120308 12,70 12,70 3,18 0,8
4170854
–
4170652
–
–
–
–
4170948
–
–
–
–
–
–
–
SPMR120312 12,70 12,70 3,18 1,2
–
–
4170783
–
–
–
–
4170949
–
–
–
–
–
–
–
WID_Master16_Turning_Inserts_B078_B079_Metric_REBRAND.indd 78 10/30/15 2:45 PM
B79
LViWID M 16 T i I B078 B079 M i REBRANDO b 15 20159 30AM
SPMT-FP
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
SPMT09T304FP 9,53 9,53 3,97 0,4 4,40
4170023
4170333
–
–
4168831
–
–
4170110
–
–
–
–
–
–
–
SPMT09T308FP 9,53 9,53 3,97 0,8 4,40
4170024
4170334
–
–
4168832
–
–
4170111
–
–
–
–
–
–
–
P
M
K
N
S
H
rst choice
alternate choice
WIDIA™ Victory™ • High-Performance Inserts
ISO Carbide Inserts
Inserts
SPMT-MP
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
SPMT09T308MP 9,53 9,53 3,97 0,8 4,40
–
4170261
–
4168925
–
–
–
4170269
–
–
–
–
–
–
–
SPMT120408MP 12,70 12,70 4,76 0,8 5,50
–
4170262
–
–
–
–
–
4170270
–
–
–
–
–
–
–
C2–C49 C50–C81 C86–C129 B8–B25 B26–B28 B30–B105
WID_Master16_Turning_Inserts_B078_B079_Metric_REBRAND.indd 79 10/30/15 2:45 PM
B80
LViWID M 16 T i I B080 B081 M i REBRAND O b 15 2015 9 30 AM
widia.com
SPU
ISO
catalogue number D L10 S R¡
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
SPUN090308 9,53 9,53 3,18 0,8
–
–
–
–
–
–
–
–
–
–
–
2028543
–
–
–
SPUN120304 12,70 12,70 3,18 0,4
4170856
–
–
–
–
–
–
–
–
–
–
2028547
–
–
–
SPUN120308 12,70 12,70 3,18 0,8
4170857
–
–
–
–
–
–
4170950
–
–
–
2028555
–
–
–
SPUN120312 12,70 12,70 3,18 1,2
–
–
–
–
–
–
–
4170951
–
–
–
2028560
–
–
–
SPUN120412 12,70 12,70 4,76 1,2
–
–
–
–
–
–
–
–
–
–
–
2028562
–
–
–
SPUN150412 15,88 15,88 4,76 1,2
–
–
–
–
–
–
–
–
–
–
–
2028565
–
2028567
–
SPUN190412 19,05 19,05 4,76 1,2
–
–
–
–
–
–
–
–
–
–
–
2028568
–
–
–
SPUN190416 19,05 19,05 4,76 1,6
–
–
–
–
–
–
–
–
–
–
–
2561892
–
–
–
P
M
K
N
S
H
rst choice
alternate choice
Inserts
SPU-T
ISO
catalogue number D L10 S R¡
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
SPUN250620T 25,40 25,40 6,35 2,0
4170858
–
–
–
–
–
–
–
–
–
–
–
–
–
–
WIDIA™ Victory™ • High-Performance Inserts
ISO Carbide Inserts
WID_Master16_Turning_Inserts_B080_B081_Metric_REBRAND.indd 80 10/30/15 2:45 PM
B81
LViWID M 16 T i I B080 B081 M i REBRANDO b 15 20159 30AM
WIDIA™ Victory™ • High-Performance Inserts
TCMT
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
TCMT110202 6,35 11,00 2,38 0,2 2,80
–
–
–
–
–
–
–
–
–
–
–
2028579
–
–
–
TCMT110204 6,35 11,00 2,38 0,4 2,80
–
–
–
–
–
–
–
–
–
–
–
2028587
–
2028589
–
TCMT16T304 9,53 16,50 3,97 0,4 4,40
–
–
–
–
–
–
–
–
–
–
–
2028607
–
–
–
TCMT16T308 9,53 16,50 3,97 0,8 4,40
–
–
–
–
–
–
–
–
–
–
–
2028624
–
2028627
–
TCMT220408 12,70 22,00 4,76 0,8 5,50
–
–
–
–
–
–
–
–
–
–
–
2028660
–
–
–
P
M
K
N
S
H
rst choice
alternate choice
ISO Carbide Inserts
Inserts
TCMT-2
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
TCMT1102042 6,35 11,00 2,38 0,4 2,80
–
–
–
–
–
–
–
–
–
–
–
–
–
–
2014082
C2–C49 C50–C81 C86–C129 B8–B25 B26–B28 B30–B105
WID_Master16_Turning_Inserts_B080_B081_Metric_REBRAND.indd 81 10/30/15 2:45 PM
B82
LViWID M 16 T i I B082 B083 M i REBRAND O b 15 2015 9 30 AM
widia.com
WIDIA™ Victory™ • High-Performance Inserts
TCMT-FP
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
TCMT110202FP 6,35 11,00 2,38 0,2 2,90
–
–
–
–
4168800
–
–
–
–
–
–
–
–
–
–
TCMT110204FP 6,35 11,00 2,38 0,4 2,80
4170006
4170313
–
4168770
4168801
–
–
4170097
–
–
–
–
–
–
–
TCMT110208FP 6,35 11,00 2,38 0,8 2,80
4170007
4170314
–
4168771
4168802
–
–
4170098
–
–
–
–
–
–
–
TCMT16T304FP 9,53 16,50 3,97 0,4 4,40
4170008
4170315
–
4168772
4168803
–
–
4170099
–
–
–
–
–
–
–
TCMT16T308FP 9,53 16,50 3,97 0,8 4,40
4170009
4170316
–
4168773
4168804
–
–
4170100
–
–
–
–
–
–
–
TCMT16T312FP 9,53 16,50 3,97 1,2 4,40
4170010
–
–
–
4168805
–
–
4170101
–
–
–
–
–
–
–
TCMT220408FP 12,70 22,00 4,76 0,8 5,50
4170011
4170317
–
–
4168806
–
–
4170102
–
–
–
–
–
–
–
P
M
K
N
S
H
rst choice
alternate choice
ISO Carbide Inserts
Inserts
TCMT-MP
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
TCMT110208MP 6,35 11,00 2,38 0,8 2,80
–
4170231
–
–
–
–
–
4170249
–
–
–
–
–
–
–
TCMT16T304MP 9,53 16,50 3,97 0,4 4,40
–
4170232
–
4168904
4168918
–
–
4170250
–
–
–
–
–
–
–
TCMT16T308MP 9,53 16,50 3,97 0,8 4,40
4170216
4170233
–
4168905
4168919
–
–
4170251
–
–
–
–
–
–
–
TCMT16T312MP 9,53 16,50 3,97 1,2 4,40
–
4170234
–
–
4168920
–
–
4170252
–
–
–
–
–
–
–
WID_Master16_Turning_Inserts_B082_B083_Metric_REBRAND.indd 82 10/30/15 2:45 PM
B83
LViWID M 16 T i I B082 B083 M i REBRANDO b 15 20159 30AM
WIDIA™ Victory™ • High-Performance Inserts
TCMT-MU
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
TCMT16T304MU 9,53 16,50 3,97 0,4 4,40
5623614
5623615
–
–
5623613
–
–
5623616
–
5623617
–
–
–
–
–
TCMT16T308MU 9,53 16,50 3,97 0,8 4,40
5623621
5623620
–
–
5623619
–
–
5623618
5623622
–
–
–
–
–
–
P
M
K
N
S
H
rst choice
alternate choice
ISO Carbide Inserts
Inserts
TCMW
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
TCMW110204 6,35 11,00 2,38 0,4 2,80
–
–
–
–
–
–
4170476
4170381
–
–
–
2028668
–
–
–
TCMW16T304 9,53 16,50 3,97 0,4 4,40
–
–
–
–
–
–
4170477
4170382
–
–
–
2028670
–
–
–
TNGG-FS
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
TNGG160404FS 9,53 16,50 4,76 0,4 3,81
–
–
–
–
–
–
–
–
5548681
5538231
5549998
–
–
–
–
TNGG220408FS 12,70 22,00 4,76 0,8 5,16
–
–
–
–
–
–
–
–
5548682
–
–
–
–
–
–
C2–C49 C50–C81 C86–C129 B8–B25 B26–B28 B30–B105
WID_Master16_Turning_Inserts_B082_B083_Metric_REBRAND.indd 83 10/30/15 2:45 PM
B84
LViWID M 16 T i I B084 B085 M i REBRAND O b 15 2015 9 31 AM
widia.com
WIDIA™ Victory™ • High-Performance Inserts
TNMA
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
TNMA160408 9,53 16,50 4,76 0,8 3,81
–
–
–
–
–
–
4171647
4171890
–
–
–
–
–
–
–
TNMA160412 9,53 16,50 4,76 1,2 3,81
–
–
–
–
–
–
4171648
4171891
–
–
–
–
–
–
–
TNMA160416 9,53 16,50 4,76 1,6 3,81
–
–
–
–
–
–
–
4171892
–
–
–
–
–
–
–
TNMA220408 12,70 22,00 4,76 0,8 5,16
–
–
–
–
–
–
4171649
4171893
–
–
–
–
–
–
–
TNMA220412 12,70 22,00 4,76 1,2 5,16
–
–
–
–
–
–
4172230
4171894
–
–
–
–
–
–
–
TNMA220416 12,70 22,00 4,76 1,6 5,16
–
–
–
–
–
–
4171651
4171895
–
–
–
–
–
–
–
TNMA270616 15,88 27,50 6,35 1,6 6,35
–
–
–
–
–
–
–
4171896
–
–
–
–
–
–
–
P
M
K
N
S
H
rst choice
alternate choice
ISO Carbide Inserts
Inserts
TNMG-FF
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
TNMG110304FF 6,35 11,00 3,18 0,4 2,26
–
–
–
–
–
–
–
4171383
5684331
–
–
–
–
–
–
TNMG110308FF 6,35 11,00 3,18 0,8 2,26
–
–
–
–
–
–
–
4171384
5684332
–
–
–
–
–
–
TNMG160404FF 9,53 16,50 4,76 0,4 3,81
4171050
–
–
–
4172691
–
–
4171385
–
–
–
–
–
–
–
TNMG160408FF 9,53 16,50 4,76 0,8 3,81
4171051
–
–
–
4172692
–
–
4171386
–
–
–
–
–
–
–
TNMG160412FF 9,53 16,50 4,76 1,2 3,81
4171052
–
–
–
4172693
–
–
4171387
–
–
–
–
–
–
–
WID_Master16_Turning_Inserts_B084_B085_Metric_REBRAND.indd 84 10/30/15 2:45 PM
B85
LViWID M 16 T i I B084 B085 M i REBRANDO b 15 20159 31AM
WIDIA™ Victory™ • High-Performance Inserts
P
M
K
N
S
H
rst choice
alternate choice
ISO Carbide Inserts
TNMG-ML
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
TNMG110304ML 6,35 11,00 3,18 0,4 2,26
–
5684347
–
–
–
–
–
4171407
–
–
–
–
–
–
–
TNMG110308ML 6,35 11,00 3,18 0,8 2,26
–
–
–
–
–
–
–
4171408
–
–
–
–
–
–
–
TNMG160404ML 9,53 16,50 4,76 0,4 3,81
4171075
4170491
–
–
–
–
4171671
4171409
–
–
–
–
–
–
–
TNMG160408ML 9,53 16,50 4,76 0,8 3,81
4171076
4170492
–
–
–
–
4171672
4171410
–
–
–
–
–
–
–
TNMG160412ML 9,53 16,50 4,76 1,2 3,81
4171077
4170493
–
–
–
–
4171673
4171411
–
–
–
–
–
–
–
TNMG220404ML 12,70 22,00 4,76 0,4 5,16
5684348
–
–
–
–
–
–
4171412
–
–
–
–
–
–
–
TNMG220408ML 12,70 22,00 4,76 0,8 5,16
4171078
4170494
–
–
–
–
–
–
–
–
–
–
–
–
–
Inserts
C2–C49 C50–C81 C86–C129 B8–B25 B26–B28 B30–B105
WID_Master16_Turning_Inserts_B084_B085_Metric_REBRAND.indd 85 10/30/15 2:45 PM
B86
LViWID M 16 T i I B086 B087 M i REBRAND O b 15 2015 9 31 AM
widia.com
WIDIA™ Victory™ • High-Performance Inserts
TNMG-MR
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
TNMG160404MR 9,53 16,50 4,76 0,4 3,81
4171150
4170573
4170059
–
–
–
–
–
–
–
–
–
–
–
–
TNMG160408MR 9,53 16,50 4,76 0,8 3,81
4171151
4170574
4170060
–
–
–
–
–
–
–
–
–
–
–
–
TNMG160412MR 9,53 16,50 4,76 1,2 3,81
4171152
4170575
4170061
–
–
–
–
–
–
–
–
–
–
–
–
TNMG220404MR 12,70 22,00 4,76 0,4 5,16
4171153
4170576
4170062
–
–
–
–
–
–
–
–
–
–
–
–
TNMG220408MR 12,70 22,00 4,76 0,8 5,16
4171154
4170577
4170063
–
–
–
–
–
–
–
–
–
–
–
–
TNMG220412MR 12,70 22,00 4,76 1,2 5,16
4171155
4170578
4170064
–
–
–
–
–
–
–
–
–
–
–
–
TNMG220416MR 12,70 22,00 4,76 1,6 5,16
4171156
4170579
4170065
–
–
–
–
–
–
–
–
–
–
–
–
P
M
K
N
S
H
rst choice
alternate choice
ISO Carbide Inserts
Inserts
TNMG-MS
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
TNMG160404MS 9,53 16,50 4,76 0,4 3,81
–
–
–
–
–
–
–
–
5908927
5908928
5908929
–
–
–
–
TNMG160408MS 9,53 16,50 4,76 0,8 3,81
–
–
–
–
–
–
–
–
5908930
5908931
5908932
–
–
–
–
TNMG220404MS 12,70 22,00 4,76 0,4 5,16
–
–
–
–
–
–
–
–
5908933
5908934
5908935
–
–
–
–
TNMG220408MS 12,70 22,00 4,76 0,8 5,16
–
–
–
–
–
–
–
–
5908936
5908937
5908938
–
–
–
–
TNMG220412MS 12,70 22,00 4,76 1,2 5,16
–
–
–
–
–
–
–
–
5908939
5908940
5908941
–
–
–
–
TNMG270608MS 15,88 27,50 6,35 0,8 6,35
–
–
–
–
–
–
–
–
–
5908942
5908943
–
–
–
–
WID_Master16_Turning_Inserts_B086_B087_Metric_REBRAND.indd 86 10/30/15 2:45 PM
B87
LViWID M 16 T i I B086 B087 M i REBRANDO b 15 20159 31AM
WIDIA™ Victory™ • High-Performance Inserts
TNMG-RH
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
TNMG160408RH 9,53 16,50 4,76 0,8 3,81
4171007
4171542
4171724
–
4173058
–
–
4171927
–
–
–
–
–
–
–
TNMG160412RH 9,53 16,50 4,76 1,2 3,81
4171008
4171543
4171725
–
4173059
–
–
4171928
–
–
–
–
–
–
–
TNMG220408RH 12,70 22,00 4,76 0,8 5,16
4171009
4171544
4171726
–
4173060
–
–
4171929
–
–
–
–
–
–
–
TNMG220412RH 12,70 22,00 4,76 1,2 5,16
4171010
4171545
4171727
–
4173061
–
–
4171930
–
–
–
–
–
–
–
TNMG220416RH 12,70 22,00 4,76 1,6 5,16
4171011
4171546
4171728
–
4173062
–
–
4171931
–
–
–
–
–
–
–
TNMG270612RH 15,88 27,50 6,35 1,2 6,35
4171012
4171547
4171729
–
–
–
–
–
–
–
–
–
–
–
–
TNMG270616RH 15,88 27,50 6,35 1,6 6,35
4171013
4171548
4171730
–
–
–
–
–
–
–
–
–
–
–
–
TNMG330924RH 19,05 33,00 9,53 2,4 7,93
4171014
4171549
4171731
–
–
–
–
–
–
–
–
–
–
–
–
P
M
K
N
S
H
rst choice
alternate choice
ISO Carbide Inserts
Inserts
C2–C49 C50–C81 C86–C129 B8–B25 B26–B28 B30–B105
WID_Master16_Turning_Inserts_B086_B087_Metric_REBRAND.indd 87 10/30/15 2:46 PM
B88
LViWID M 16 T i I B088 B089 M i REBRAND O b 15 2015 9 32 AM
widia.com
WIDIA™ Victory™ • High-Performance Inserts
P
M
K
N
S
H
rst choice
alternate choice
ISO Carbide Inserts
TNMG-UF
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
TNMG160404UF 9,53 16,50 4,76 0,4 3,81
–
–
–
4169367
4169393
–
–
–
5432605
–
–
–
–
–
–
TNMG160408UF 9,53 16,50 4,76 0,8 3,81
5645615
–
–
4169368
4169394
–
–
–
5432606
–
–
–
–
–
–
TNMG160412UF 9,53 16,50 4,76 1,2 3,81
–
–
–
4169369
4169395
–
–
–
5645613
–
–
–
–
–
–
TNMG220404UF 12,70 22,00 4,76 0,4 5,16
–
–
–
4169370
4169396
–
–
–
5645612
–
–
–
–
–
–
TNMG220408UF 12,70 22,00 4,76 0,8 5,16
–
–
–
4169371
4169397
–
–
–
5645614
–
–
–
–
–
–
Inserts
TNMG-UM
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
TNMG160404UM 9,53 16,50 4,76 0,4 3,81
–
–
–
4172369
4172396
4172426
–
–
5550226
–
–
–
–
–
–
TNMG160408UM 9,53 16,50 4,76 0,8 3,81
–
–
–
4172370
4172397
4172427
–
–
5550228
–
–
–
–
–
–
TNMG160412UM 9,53 16,50 4,76 1,2 3,81
–
–
–
4172371
4172398
4172428
–
–
–
–
–
–
–
–
–
TNMG160416UM 9,53 16,50 4,76 1,6 3,81
–
–
–
–
4172399
4172429
–
–
–
–
–
–
–
–
–
TNMG220404UM 12,70 22,00 4,76 0,4 5,16
–
–
–
4172372
4172400
4172430
–
–
–
–
–
–
–
–
–
TNMG220408UM 12,70 22,00 4,76 0,8 5,16
5645266
–
–
4172373
4172401
4172431
–
–
5645265
–
–
–
–
–
–
TNMG220412UM 12,70 22,00 4,76 1,2 5,16
–
–
–
4172374
4172402
–
–
–
5473222
–
–
–
–
–
–
WID_Master16_Turning_Inserts_B088_B089_Metric_REBRAND.indd 88 10/30/15 2:46 PM
B89
LViWID M 16 T i I B088 B089 M i REBRANDO b 15 20159 32AM
TNMG-UR
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
TNMG160408UR 9,53 16,50 4,76 0,8 3,81
4171115
4170522
4170035
4169434
4169465
–
–
4171441
–
5579395
–
–
–
–
–
TNMG160412UR 9,53 16,50 4,76 1,2 3,81
4171116
4170523
–
–
4169466
4169502
–
4171442
–
5680175
–
–
–
–
–
TNMG160416UR 9,53 16,50 4,76 1,6 3,81
4171117
–
–
–
4169467
–
–
4171443
–
–
–
–
–
–
–
TNMG220408UR 12,70 22,00 4,76 0,8 5,16
4171118
4170524
4170036
4169435
4169468
4169503
–
4171444
–
5579397
–
–
–
–
–
TNMG220412UR 12,70 22,00 4,76 1,2 5,16
4171119
4170525
4170037
4169436
4169469
4169504
–
4171445
–
5473198
–
–
–
–
–
TNMG220416UR 12,70 22,00 4,76 1,6 5,16
4171120
4170526
–
–
4169470
4169505
–
4171446
–
–
–
–
–
–
–
TNMG270612UR 15,88 27,50 6,35 1,2 6,35
4171121
4170527
–
4169437
4169471
4169506
–
4171447
–
5579405
–
–
–
–
–
TNMG270616UR 15,88 27,50 6,35 1,6 6,35
4171122
4170528
–
4169438
4169472
4169507
–
4171448
–
–
–
–
–
–
–
P
M
K
N
S
H
rst choice
alternate choice
Inserts
WIDIA™ Victory™ • High-Performance Inserts
ISO Carbide Inserts
C2–C49 C50–C81 C86–C129 B8–B25 B26–B28 B30–B105
WID_Master16_Turning_Inserts_B088_B089_Metric_REBRAND.indd 89 10/30/15 2:46 PM
B90
LViWID M 16 T i I B090 B091 M i REBRAND O b 15 2015 9 32 AM
widia.com
WIDIA™ Victory™ • High-Performance Inserts
TNMM-65
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
TNMM16040865 9,53 16,50 4,76 0,8 3,81
–
5696618
5696619
–
–
–
–
–
–
–
–
–
–
–
–
TNMM16041265 9,53 16,50 4,76 1,2 3,81
–
–
5696620
–
–
–
–
–
–
–
–
–
–
–
–
TNMM22040865 12,70 22,00 4,76 0,8 5,16
5696621
5696622
5696623
–
–
–
–
–
–
–
–
–
–
–
–
TNMM22041265 12,70 22,00 4,76 1,2 5,16
–
5696625
5696626
–
5696624
–
–
–
–
–
–
–
–
–
–
TNMM22041665 12,70 22,00 4,76 1,6 5,16
5696628
5696629
–
–
5696627
–
–
–
–
–
–
–
–
–
–
P
M
K
N
S
H
rst choice
alternate choice
ISO Carbide Inserts
TNMP
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
TNMP160404 9,53 16,50 4,76 0,4 3,81
–
–
–
4172143
4173670
4173709
–
–
4172491
–
–
–
–
–
–
TNMP160408 9,53 16,50 4,76 0,8 3,81
–
–
–
4172144
4173671
4173710
–
–
4172492
4172623
–
–
–
–
–
TNMP160412 9,53 16,50 4,76 1,2 3,81
–
–
–
4172145
4173672
4173711
–
–
4172493
4172624
–
–
–
–
–
TNMP220404 12,70 22,00 4,76 0,4 5,16
–
–
–
4172146
4173673
4173712
–
–
4172494
–
–
–
–
–
–
TNMP220408 12,70 22,00 4,76 0,8 5,16
–
–
–
4172147
4173674
4173713
–
–
4172495
4172625
–
–
–
–
–
TNMP220412 12,70 22,00 4,76 1,2 5,16
–
–
–
4172148
4173675
4173714
–
–
4172496
4172626
–
–
–
–
–
Inserts
WID_Master16_Turning_Inserts_B090_B091_Metric_REBRAND.indd 90 10/30/15 2:46 PM
B91
LViWID M 16 T i I B090 B091 M i REBRANDO b 15 20159 32AM
WIDIA™ Victory™ • High-Performance Inserts
TNU
ISO
catalogue number D L10 S R¡
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
TNUN160408 9,53 16,50 4,76 0,8
–
–
–
–
–
–
–
4170964
–
–
–
–
–
–
–
P
M
K
N
S
H
rst choice
alternate choice
ISO Carbide Inserts
Inserts
TPG
ISO
catalogue number D L10 S R¡
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
TPGN110308 6,35 11,00 3,18 0,8
–
–
–
–
–
–
–
4170952
–
–
–
–
–
–
–
TPGN160308 9,53 16,50 3,18 0,8
–
–
–
–
–
–
–
4170953
–
–
–
–
–
–
–
S
TPGA
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
TPGA110204 6,35 11,00 2,38 0,4 2,80
–
–
–
–
–
–
–
–
–
–
–
2015081
–
–
–
TPGA110208 6,35 11,00 2,38 0,8 2,80
–
–
–
–
–
–
–
–
–
–
–
2031786
–
–
–
C2–C49 C50–C81 C86–C129 B8–B25 B26–B28 B30–B105
WID_Master16_Turning_Inserts_B090_B091_Metric_REBRAND.indd 91 10/30/15 2:46 PM
B92
LViWID M 16 T i I B092 B093 M i REBRAND O b 15 2015 9 32 AM
widia.com
WIDIA™ Victory™ • High-Performance Inserts
TPMR
ISO
catalogue number D L10 S R¡
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
TPMR110304 6,35 11,00 3,18 0,4
4170859
–
4170784
–
–
–
–
–
–
–
–
–
–
–
–
TPMR110308 6,35 11,00 3,18 0,8
4170860
–
4170785
–
–
–
–
4170954
–
–
–
–
–
–
–
TPMR160304 9,53 16,50 3,18 0,4
4170861
–
4170786
–
–
–
–
4170955
–
–
–
–
–
–
–
TPMR160308 9,53 16,50 3,18 0,8
4170862
–
4170787
–
–
–
–
4170956
–
–
–
–
–
–
–
TPMR160312 9,53 16,50 3,18 1,2
4170863
–
4170788
–
–
–
–
4170957
–
–
–
–
–
–
–
P
M
K
N
S
H
ISO Carbide Inserts
Inserts
S
rst choice
alternate choice
TPMT-FP
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
TPMT090208FP 5,56 9,63 2,38 0,8 2,50
4170025
4170335
–
4168818
4168833
–
–
4170112
–
–
–
–
–
–
–
TPMT110204FP 6,35 11,00 2,38 0,4 2,80
4170026
4170336
–
4168819
4168834
–
–
4170113
–
–
–
–
–
–
–
TPMT110208FP 6,35 11,00 2,38 0,8 2,80
4170027
4170337
–
4168820
4168835
–
–
4170114
–
–
–
–
–
–
–
TPMT16T304FP 9,53 16,50 3,97 0,4 4,40
4170028
4170338
–
–
4168836
–
–
4170115
–
–
–
–
–
–
–
TPMT16T308FP 9,53 16,50 3,97 0,8 4,40
4170029
4170339
–
–
4168837
–
–
4170116
–
–
–
–
–
–
–
TPMT16T312FP 9,53 16,50 3,97 1,2 4,40
–
–
–
–
4168838
–
–
–
–
–
–
–
–
–
–
TPMT220408FP 12,70 22,00 4,76 0,8 5,50
–
4170340
–
–
–
–
–
–
–
–
–
–
–
–
–
WID_Master16_Turning_Inserts_B092_B093_Metric_REBRAND.indd 92 10/30/15 2:46 PM
B93
LViWID M 16 T i I B092 B093 M i REBRANDO b 15 20159 32AM
WIDIA™ Victory™ • High-Performance Inserts
TPMT-MP
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
TPMT110208MP 6,35 11,00 2,38 0,8 2,80
–
4170263
–
–
–
–
–
4170271
–
–
–
–
–
–
–
TPMT16T308MP 9,53 16,50 3,97 0,8 4,40
–
4170264
–
–
–
–
–
4170272
–
–
–
–
–
–
–
TPMT16T312MP 9,53 16,50 3,97 1,2 4,40
–
4170265
–
–
–
–
–
4170273
–
–
–
–
–
–
–
P
M
K
N
S
H
rst choice
alternate choice
ISO Carbide Inserts
Inserts
TPU
ISO
catalogue number D L10 S R¡
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
TPUN110304 6,35 11,00 3,18 0,4
4170864
–
4170789
–
–
–
–
–
–
–
–
2028806
–
–
–
TPUN110308 6,35 11,00 3,18 0,8
4170865
–
–
–
–
–
–
–
–
–
–
2028814
–
–
–
TPUN160304 9,53 16,50 3,18 0,4
4170866
4170645
–
–
–
–
–
4170958
–
–
–
2028821
–
–
–
TPUN160308 9,53 16,50 3,18 0,8
4170867
4170646
–
–
–
–
–
4170959
–
–
–
2028830
–
2028832
–
TPUN160312 9,53 16,50 3,18 1,2
–
4170647
–
–
–
–
–
4170960
–
–
–
2028833
–
–
–
TPUN220408 12,70 22,00 4,76 0,8
4170868
4170648
4170790
–
–
–
–
–
–
–
–
–
–
–
–
TPUN220412 12,70 22,00 4,76 1,2
–
4170649
4170791
–
–
–
–
4170961
–
–
–
2028843
–
2028847
–
S
C2–C49 C50–C81 C86–C129 B8–B25 B26–B28 B30–B105
WID_Master16_Turning_Inserts_B092_B093_Metric_REBRAND.indd 93 10/30/15 2:46 PM
B94
LViWID M 16 T i I B094 B095 M i REBRAND N b 11 2015 10 44 AM
widia.com
WIDIA™ Victory™ • High-Performance Inserts
VBMT
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
VBMT160404 9,53 16,61 4,76 0,4 4,40
4169983
4170553
4170807
–
–
–
–
–
–
–
–
–
–
–
–
VBMT160408 9,53 16,61 4,76 0,8 4,40
4169984
4170554
4170808
–
–
–
–
–
–
–
–
–
–
–
–
VBMT160412 9,53 16,61 4,76 1,2 4,40
4169985
4170555
4170809
–
–
–
–
–
–
–
–
–
–
–
–
P
M
K
N
S
H
rst choice
alternate choice
ISO Carbide Inserts
Inserts
VBMT-FP
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
VBMT110302FP 6,35 11,07 3,18 0,2 2,80
–
4170318
–
–
–
–
–
–
–
–
–
–
–
–
–
VBMT110304FP 6,35 11,07 3,18 0,4 2,80
4170012
4170319
–
4168774
4168807
–
–
–
–
–
–
–
–
–
–
VBMT110308FP 6,35 11,07 3,18 0,8 2,80
–
4170320
–
4168775
4168808
–
–
–
–
–
–
–
–
–
–
VBMT160402FP 9,53 16,61 4,76 0,2 4,40
–
4170321
–
–
4168809
–
–
–
–
–
–
–
–
–
–
VBMT160404FP 9,53 16,61 4,76 0,4 4,40
4170013
4170322
–
4168776
4168810
–
–
4170103
–
–
–
–
–
–
–
VBMT160408FP 9,53 16,61 4,76 0,8 4,40
4170014
4170323
–
4168777
4168811
–
–
4170104
–
–
–
–
–
–
–
VBMT160412FP 9,53 16,61 4,76 1,2 4,40
–
4170324
–
–
–
–
–
–
–
–
–
–
–
–
–
WID_Master16_Turning_Inserts_B094_B095_Metric_REBRAND.indd 94 11/11/15 5:38 PM
B95
LViWID M 16 T i I B094 B095 M i REBRANDN b 11 201510 44AM
WIDIA™ Victory™ • High-Performance Inserts
VBMT-MP
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
VBMT160404MP 9,53 16,61 4,76 0,4 4,40
–
4170235
–
–
4168921
–
–
4170253
–
–
–
–
–
–
–
VBMT160408MP 9,53 16,61 4,76 0,8 4,40
–
4170236
–
–
4168922
–
–
4170254
–
–
–
–
–
–
–
P
M
K
N
S
H
rst choice
alternate choice
ISO Carbide Inserts
Inserts
VNGG-FS
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
VNGG160401FS 9,53 16,61 4,76 0,1 3,81
–
–
–
–
–
–
–
–
5548684
–
5550000
–
–
–
–
VNGG160402FS 9,53 16,61 4,76 0,2 3,81
–
–
–
–
–
–
–
–
5548683
–
5549999
–
–
–
–
VNGG160404FS 9,53 16,61 4,76 0,4 3,81
–
–
–
–
–
–
–
–
5548685
5538232
5550001
–
–
–
–
VNGG160408FS 9,53 16,61 4,76 0,8 3,81
–
–
–
–
–
–
–
–
5548686
5538233
5550002
–
–
–
–
C2–C49 C50–C81 C86–C129 B8–B25 B26–B28 B30–B105
WID_Master16_Turning_Inserts_B094_B095_Metric_REBRAND.indd 95 11/11/15 5:38 PM
B96
LViWID M 16 T i I B096 B097 M i REBRAND O b 15 2015 9 32 AM
widia.com
WIDIA™ Victory™ • High-Performance Inserts
P
M
K
N
S
H
rst choice
alternate choice
ISO Carbide Inserts
VNGP
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
VNGP160401 9,53 16,61 4,76 0,1 3,81
–
–
–
–
–
–
–
–
5549195
–
5549211
–
–
–
–
VNGP160402 9,53 16,61 4,76 0,2 3,81
–
–
–
–
–
–
–
–
5549196
–
–
–
–
–
–
VNGP220404 12,70 22,14 4,76 0,4 5,16
–
–
–
–
–
–
–
–
5549197
–
–
–
–
–
–
VNGP220408 12,70 22,14 4,76 0,8 5,16
–
–
–
–
–
–
–
–
5549198
–
5549212
–
–
–
–
Inserts
VNMA
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
VNMA160408 9,53 16,61 4,76 0,8 3,81
–
–
–
–
–
–
4171652
4171897
–
–
–
–
–
–
–
VNMG
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
VNMG12T304 7,14 12,45 3,97 0,4 3,60
–
–
–
–
–
–
–
–
5095163
5095164
–
–
–
–
–
VNMG12T308 7,14 12,45 3,97 0,8 3,65
–
–
–
–
–
–
–
4170965
5095165
5095166
–
–
–
–
–
WID_Master16_Turning_Inserts_B096_B097_Metric_REBRAND.indd 96 10/30/15 2:46 PM
B97
LViWID M 16 T i I B096 B097 M i REBRANDO b 15 20159 32AM
WIDIA™ Victory™ • High-Performance Inserts
VNMG-FF
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
VNMG160404FF 9,53 16,61 4,76 0,4 3,81
4171053
–
–
–
4172694
–
–
–
5684334
–
–
–
–
–
–
VNMG160408FF 9,53 16,61 4,76 0,8 3,81
4171054
–
–
–
4172695
–
–
–
5684333
–
–
–
–
–
–
P
M
K
N
S
H
rst choice
alternate choice
ISO Carbide Inserts
Inserts
VNMG-ML
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
VNMG160404ML 9,53 16,61 4,76 0,4 3,81
4171079
4170495
–
–
–
–
4171674
4171413
–
–
–
–
–
–
–
VNMG160408ML 9,53 16,61 4,76 0,8 3,81
4171080
4170496
–
–
–
–
4171675
4171414
–
–
–
–
–
–
–
VNMG-MR
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
VNMG160408MR 9,53 16,61 4,76 0,8 3,81
4171157
4170580
4170066
–
–
–
–
–
–
–
–
–
–
–
–
C2–C49 C50–C81 C86–C129 B8–B25 B26–B28 B30–B105
WID_Master16_Turning_Inserts_B096_B097_Metric_REBRAND.indd 97 10/30/15 2:47 PM
B98
LViWID M 16 T i I B098 B099 M i REBRAND O b 15 2015 9 33 AM
widia.com
WIDIA™ Victory™ • High-Performance Inserts
P
M
K
N
S
H
rst choice
alternate choice
ISO Carbide Inserts
VNMG-MS
Inserts
VNMG-RH
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
VNMG160408RH 9,53 16,61 4,76 0,8 3,81
4171015
4171550
4171732
–
–
–
–
–
–
–
–
–
–
–
–
VNMG220408RH 12,70 22,14 4,76 0,8 5,16
4171016
4171551
4171733
–
–
–
–
–
–
–
–
–
–
–
–
VNMG220412RH 12,70 22,14 4,76 1,2 5,16
4171017
4171552
4171734
–
–
–
–
–
–
–
–
–
–
–
–
VNMG-UF
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
VNMG160404UF 9,53 16,61 4,76 0,4 3,81
–
–
–
4169372
4169398
–
–
–
5645616
–
–
–
–
–
–
VNMG160408UF 9,53 16,61 4,76 0,8 3,81
5645618
–
–
4169373
4169399
–
–
–
5645617
–
–
–
–
–
–
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
VNMG160404MS 9,53 16,61 4,76 0,4 3,81
–
–
–
–
–
–
–
–
5908944
5908945
5908946
–
–
–
–
VNMG160408MS 9,53 16,61 4,76 0,8 3,81
–
–
–
–
–
–
–
–
5908947
5908948
5908949
–
–
–
–
VNMG220404MS 12,70 22,14 4,76 0,4 5,16
–
–
–
–
–
–
–
–
5908950
5908961
5908962
–
–
–
–
VNMG220408MS 12,70 22,14 4,76 0,8 5,16
–
–
–
–
–
–
–
–
5908963
5908964
5908965
–
–
–
–
WID_Master16_Turning_Inserts_B098_B099_Metric_REBRAND.indd 98 10/30/15 2:47 PM
B99
LViWID M 16 T i I B098 B099 M i REBRANDO b 15 20159 33AM
WIDIA™ Victory™ • High-Performance Inserts
VNMG-UR
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
VNMG160408UR 9,53 16,61 4,76 0,8 3,81
4171123
4170529
4170038
4169439
4169473
4169508
–
4171449
–
5579416
–
–
–
–
–
VNMG160412UR 9,53 16,61 4,76 1,2 3,81
4171124
4170530
–
4169440
4169474
–
–
4171450
5680176
–
–
–
–
–
–
P
M
K
N
S
H
rst choice
alternate choice
ISO Carbide Inserts
Inserts
VNMP
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
VNMP160404 9,53 16,61 4,76 0,4 3,81
–
–
–
–
–
–
–
–
4172497
–
–
–
–
–
–
VNMP160408 9,52 16,61 4,76 0,8 3,81
–
–
–
–
–
–
–
–
4172498
–
–
–
–
–
–
NOTE: DNMP-style inserts are single-sided.
WNGG-FS
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
WNGG080404FS 12,70 8,69 4,76 0,4 5,16
–
–
–
–
–
–
–
–
5548687
5538234
5550003
–
–
–
–
WNGG080408FS 12,70 8,69 4,76 0,8 5,16
–
–
–
–
–
–
–
–
5548688
5538235
5550004
–
–
–
–
C2–C49 C50–C81 C86–C129 B8–B25 B26–B28 B30–B105
WID_Master16_Turning_Inserts_B098_B099_Metric_REBRAND.indd 99 10/30/15 2:47 PM
B100
LViWID M 16 T i I B100 B101 M i REBRAND O b 15 2015 9 33 AM
widia.com
WIDIA™ Victory™ • High-Performance Inserts
WNMA
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
WNMA060408 9,53 6,52 4,76 0,8 3,81
–
–
–
–
–
–
4171653
4171898
–
–
–
–
–
–
–
WNMA060412 9,53 6,52 4,76 1,2 3,81
–
–
–
–
–
–
–
4171899
–
–
–
–
–
–
–
WNMA080408 12,70 8,69 4,76 0,8 5,16
–
–
–
–
–
–
4171654
4171900
–
–
–
–
–
–
–
WNMA080412 12,70 8,69 4,76 1,2 5,16
–
–
–
–
–
–
4171655
4171901
–
–
–
–
–
–
–
WNMA080416 12,70 8,69 4,76 1,6 5,16
–
–
–
–
–
–
4171656
4171902
–
–
–
–
–
–
–
P
M
K
N
S
H
rst choice
alternate choice
ISO Carbide Inserts
Inserts
WNMG-FF
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
WNMG060404FF 9,53 6,52 4,76 0,4 3,81
4171055
–
–
–
4172696
–
–
4171388
–
–
–
–
–
–
–
WNMG060408FF 9,53 6,52 4,76 0,8 3,81
4171056
–
–
–
–
–
–
4171389
–
–
–
–
–
–
–
WNMG080404FF 12,70 8,69 4,76 0,4 5,16
4171057
–
–
–
4172697
–
–
–
5684336
–
–
–
–
–
–
WNMG080408FF 12,70 8,69 4,76 0,8 5,16
4171058
–
–
–
4172698
–
–
–
5684335
–
–
–
–
–
–
WID_Master16_Turning_Inserts_B100_B101_Metric_REBRAND.indd 100 10/30/15 2:47 PM
B101
LViWID M 16 T i I B100 B101 M i REBRANDO b 15 20159 33AM
WIDIA™ Victory™ • High-Performance Inserts
WNMG-FW
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
WNMG060404FW 9,53 6,52 4,76 0,4 3,81
5623510
–
–
–
–
–
–
–
–
–
–
–
–
–
–
WNMG060408FW 9,53 6,52 4,76 0,8 3,81
5623511
–
–
–
–
–
–
–
–
–
–
–
–
–
–
WNMG080404FW 12,70 8,69 4,76 0,4 5,16
5623514
–
–
4171762
4173109
–
4171693
–
–
–
–
–
–
–
–
WNMG080408FW 12,70 8,69 4,76 0,8 5,16
5623515
–
–
4171763
4173110
–
4171694
–
–
–
–
–
–
–
–
WNMG080412FW 12,70 8,69 4,76 1,2 5,16
–
–
–
4171764
4173111
–
4171696
–
–
–
–
–
–
–
–
P
M
K
N
S
H
rst choice
alternate choice
ISO Carbide Inserts
Inserts
WNMG-ML
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
WNMG060404ML 9,53 6,52 4,76 0,4 3,81
4171081
–
–
–
–
–
4171676
4171415
–
–
–
–
–
–
–
WNMG060408ML 9,53 6,52 4,76 0,8 3,81
4171082
4170497
–
–
–
–
4171677
4171416
–
–
–
–
–
–
–
WNMG080404ML 12,70 8,69 4,76 0,4 5,16
4171083
4170498
–
–
–
–
4171678
4171417
–
–
–
–
–
–
–
WNMG080408ML 12,70 8,69 4,76 0,8 5,16
4171084
4170499
–
–
–
–
4171679
4171418
–
–
–
–
–
–
–
C2–C49 C50–C81 C86–C129 B8–B25 B26–B28 B30–B105
WID_Master16_Turning_Inserts_B100_B101_Metric_REBRAND.indd 101 10/30/15 2:47 PM
widia.com
B102
LViWID M 16 T i I B102 B103 M i REBRAND N b 11 2015 7 26 AM
WIDIA™ Victory™ • High-Performance Inserts
WNMG-MR
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
WNMG080408MR 12,70 8,69 4,76 0,8 5,16
4171158
4170581
4170067
–
4173033
4173148
–
–
–
–
–
–
–
–
–
WNMG080412MR 12,70 8,69 4,76 1,2 5,16
4171159
4170582
4170068
–
4173034
4173149
–
–
–
–
–
–
–
–
–
WNMG080416MR 12,70 8,69 4,76 1,6 5,16
4171160
4170583
–
–
–
–
–
–
–
–
–
–
–
–
–
P
M
K
N
S
H
rst choice
alternate choice
ISO Carbide Inserts
Inserts
WNMG-MS
WNMG-MW
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
WNMG060408MW 9,53 6,52 4,76 0,8 3,81
5623512
5623513
–
–
–
–
–
–
–
–
–
–
–
–
–
WNMG080408MW 12,70 8,69 4,76 0,8 5,16
5623516
5623517
–
–
4173118
–
4171695
–
–
–
–
–
–
–
–
WNMG080412MW 12,70 8,69 4,76 1,2 5,16
–
–
–
–
4173119
–
4171697
–
–
–
–
–
–
–
–
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
WNMG060408MS 9,53 6,52 4,76 0,8 3,81
–
–
–
–
–
–
–
–
5908966
5908967
5908968
–
–
–
–
WNMG080404MS 12,70 8,69 4,76 0,4 5,16
–
–
–
–
–
–
–
–
5908969
5908970
5908971
–
–
–
–
WNMG080408MS 12,70 8,69 4,76 0,8 5,16
–
–
–
–
–
–
–
–
5908972
5908973
5908974
–
–
–
–
WID_Master16_Turning_Inserts_B102_B103_Metric_REBRAND.indd 102 11/11/15 9:21 AM
B103
LViWID M 16 T i I B102 B103 M i REBRANDN b 11 20157 26AM
WIDIA™ Victory™ • High-Performance Inserts
P
M
K
N
S
H
rst choice
alternate choice
ISO Carbide Inserts
WNMG-RH
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
WNMG060408RH 9,53 6,52 4,76 0,8 3,81
4171018
4171553
4171735
–
4173063
–
–
–
–
–
–
–
–
–
–
WNMG080408RH 12,70 8,69 4,76 0,8 5,16
4171019
4171554
4171736
–
4173064
–
–
4171932
–
–
–
–
–
–
–
WNMG080412RH 12,70 8,69 4,76 1,2 5,16
4171020
4171555
4171737
–
4173065
–
–
4171933
–
–
–
–
–
–
–
WNMG080416RH 12,70 8,69 4,76 1,6 5,16
4171021
4171556
4171738
–
4173066
–
–
4171934
–
–
–
–
–
–
–
Inserts
WNMG-UF
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
WNMG060404UF 9,53 6,52 4,76 0,4 3,81
–
–
–
4169374
4169400
–
–
–
5645621
–
–
–
–
–
–
WNMG060408UF 9,53 6,52 4,76 0,8 3,81
–
–
–
4169375
4169401
–
–
–
5645622
–
–
–
–
–
–
WNMG080404UF 12,70 8,69 4,76 0,4 5,16
–
–
–
4169376
4169402
–
–
–
5645619
–
–
–
–
–
–
WNMG080408UF 12,70 8,69 4,76 0,8 5,16
–
–
–
4169377
4169403
–
–
–
5645623
–
–
–
–
–
–
WNMG080412UF 12,70 8,69 4,76 1,2 5,16
–
–
–
4169378
4169404
–
–
–
5645624
–
–
–
–
–
–
C2–C49 C50–C81 C86–C129 B8–B25 B26–B28 B30–B105
WID_Master16_Turning_Inserts_B102_B103_Metric_REBRAND.indd 103 11/11/15 9:21 AM
B104
LViWID M 16 T i I B104 B105 M i REBRAND O b 15 2015 9 34 AM
widia.com
WIDIA™ Victory™ • High-Performance Inserts
WNMG-UM
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
WNMG060404UM 9,53 6,52 4,76 0,4 3,81
–
–
–
4172375
4172403
4172432
–
–
5645268
–
–
–
–
–
–
WNMG060408UM 9,53 6,52 4,76 0,8 3,81
–
–
–
4172376
4172404
4172433
–
–
5645267
–
–
–
–
–
–
WNMG060412UM 9,53 6,52 4,76 1,2 3,81
–
–
–
–
4172405
4172434
–
–
–
–
–
–
–
–
–
WNMG080404UM 12,70 8,69 4,76 0,4 5,16
–
–
–
4172377
4172406
4172435
–
–
–
–
–
–
–
–
–
WNMG080408UM 12,70 8,69 4,76 0,8 5,16
–
5645270
–
4172378
4172407
4172436
–
–
–
–
–
–
–
–
–
WNMG080412UM 12,70 8,69 4,76 1,2 5,16
5645271
–
–
4172379
4172408
4172437
–
–
5645269
–
–
–
–
–
–
WNMG080416UM 12,70 8,69 4,76 1,6 5,16
–
–
–
–
4172409
4172438
–
–
–
–
–
–
–
–
–
P
M
K
N
S
H
rst choice
alternate choice
ISO Carbide Inserts
Inserts
WNMG-UR
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
WNMG060408UR 9,53 6,52 4,76 0,8 3,81
4171125
4170531
4170039
4169441
4169475
–
–
4171451
5680178
5680177
–
–
–
–
–
WNMG060412UR 9,53 6,52 4,76 1,2 3,81
4171126
4170532
–
–
–
–
–
4171452
–
–
–
–
–
–
–
WNMG080408UR 12,70 8,69 4,76 0,8 5,16
4171127
4170533
4170040
4169442
4169476
4169509
5680179
4171453
–
–
–
–
–
–
–
WNMG080412UR 12,70 8,69 4,76 1,2 5,16
4171128
4170534
4170041
4169443
4169477
4169510
–
4171454
5579420
–
–
–
–
–
–
WNMG080416UR 12,70 8,69 4,76 1,6 5,16
4171129
4170535
4170042
–
4169478
4169511
–
4171455
–
–
–
–
–
–
–
WID_Master16_Turning_Inserts_B104_B105_Metric_REBRAND.indd 104 10/30/15 2:48 PM
B105
LViWID M 16 T i I B104 B105 M i REBRANDO b 15 20159 34AM
WNMP
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
WNMP080408 12,70 8,69 4,76 0,8 5,16
–
–
–
–
–
–
–
–
4172499
–
–
–
–
–
–
WNMP080412 12,70 8,69 4,76 1,2 5,16
–
–
–
–
–
–
–
–
4172500
–
–
–
–
–
–
P
M
K
N
S
H
rst choice
alternate choice
WIDIA™ Victory™ • High-Performance Inserts
ISO Carbide Inserts
Inserts
WPMT-FP
ISO
catalogue number D L10 S R¡D1
WP15CT
WP25CT
WP35CT
WM15CT
WM25CT
WM35CT
WK05CT
WK20CT
WS10PT
WS25PT
WU10HT
THM
TTM
TTR
TTI15
WPMT040204FP 6,35 4,34 2,38 0,4 2,80
–
4170341
–
–
–
–
–
–
–
–
–
–
–
–
–
WPMT06T304FP 9,53 6,52 3,97 0,4 4,40
4170030
–
–
4168821
4168839
–
–
–
–
–
–
–
–
–
–
WPMT06T308FP 9,53 6,52 3,97 0,8 4,40
4170031
4170342
–
–
4168840
–
–
–
–
–
–
–
–
–
–
WPMTS3T104FP 4,76 3,25 1,98 0,4 2,15
–
4170343
–
–
4168841
–
–
–
–
–
–
–
–
–
–
C2–C49 C50–C81 C86–C129 B8–B25 B26–B28 B30–B105
WID_Master16_Turning_Inserts_B104_B105_Metric_REBRAND.indd 105 10/30/15 2:48 PM
B106
LViWID M 16 T i I B106 B107 M i REBRAND N b 11 2015 10 45 AM
widia.com
WIDIA VariTurn is the cost-effective line of inserts from the
brand you already know and trust for quality. Each insert is
100% manufactured by WIDIA to outperform the competition.
WIDIA VariTurn offers the versatility for those operators that
are cutting steel today and cast iron tomorrow and need an
insert to get the job done. A focused portfolio with a simple
grade selection method allows WIDIA VariTurn to be used
for up to approximately 80% of all turning applications.
• Engineered to optimise performance.
• Gold coating on every insert.
• Proven grade technologies.
The Gold Standard for Value •
WIDIA™ VariTurn™
VariTurn
WID_Master16_Turning_Inserts_B106_B107_Metric_REBRAND.indd 106 11/11/15 5:38 PM
B107
LViWID M 16 T i I B106 B107 M i REBRANDN b 11 201510 45AM
widia.com
Getting the Most from Every Insert
WIDIA™ VariTurn™ products make it simple to get the most out of your inserts, and your money. Every insert is gold,
which exposes wear as the tool continues to be used. This makes it easy to detect when an insert is ready to be
changed — maximising the product’s value and protecting the workpiece. Also, because WIDIA VariTurn inserts can
be used in most applications, a single insert can take on any number of tasks, thus reducing your inventory. WIDIA
VariTurn products are also reliable enough to cut steel, stainless steel, cast iron, and high-temperature alloys, enabling
quick changes in workpiece materials without the need to swap inserts, saving time and money.
WIDIA VariTurn Options
This versatile line offers a simple geometry selection system, eight grades, and eight geometries,
including negative rake and screw-on. With these options, WIDIA VariTurn inserts cover 80% of all
general turning applications.
Post-coat treatment
• Improves edge toughness.
• Wide range of applications.
Improved edge toughness
• Provides smooth outer surface to reduce
forces, friction, and workpiece sticking.
Post-coat grinding
• Provides secure seating surface.
MT-CVD/CVD–
TiN-TiCN-AI203-TiN
WID_Master16_Turning_Inserts_B106_B107_Metric_REBRAND.indd 107 11/11/15 5:38 PM
B108
LViWID M 16 T i I B108 B109 M i REBRAND N b 11 2015 10 47 AM
widia.com
How Do Catalogue Numbers Work?
VariTurn™ Inserts
Catalogue Numbering System
Each character in our catalogue number signi es a speci c
trait of that product. Use the following key columns and
corresponding images to easily identify which attributes apply.
CNMG1204086P
CNMG12
Insert Shape Insert Clearance
Angle
Tolerance
Class
Insert
Features
Size
HHexagon
120° ATolerances apply prior
to edge prep and coating
N
R
F
A
M
G
W
T
Q
U
B
H
C
J
RεRε
OOctagon
135° B
PPentagon
108° C
RRound
—D
Rε
SSquare
90° E
TTriangular
60° F
C
D
E
M
V
Rhomboid
80°
55°
75°
86°
35°
G
D = Theoretical diameter
of the insert inscribed
circle
S = Thickness
B = See gures below
X
V
Special
Design
W
Trigon
80°
with enlarged
corner angles
N
LRectangular
90° P
A
B
N/K
Parallelogram
85°
82°
55°
O
Indicated for other
clearance angles
requiring descriptions.
“Code for mm
cutting edge length
“L10”
“D”
mm C D R S T V W
3,97 S4 04 03 03 06 – –
4,76 04 05 04 04 08 08 S3
5,56 05 06 05 05 09 09 03
6,00 – – 06 – – – –
6,35 06 07 06 06 11 11 04
7,94 08 09 07 07 13 13 05
8,00 – – 08 – – – –
9,52 09 11 09 09 16 16 06
10,00 – – 10 – – – –
11,11 11 13 11 11 19 19 07
12,00 – – 12 – – – –
12,70 12 15 12 12 22 22 08
14,29 14 17 14 14 24 24 09
15,88 16 19 15 15 27 27 10
16,00 – – 16 – – – –
17,46 17 21 17 17 30 30 11
19,05 19 23 19 19 33 33 13
20,00 – – 20 – – – –
22,22 22 27 22 22 38 38 15
25,00 – – 25 – – – –
25,40 25 31 25 25 44 44 17
31,75 32 38 31 31 54 54 21
32,00 – – 32 – – – –
tolerance
class
tolerance
on “D”
tolerance
on “B”
tolerance
on “S”
C ±0,025 ±0,013 ±0,025
H ±0,013 ±0,013 ±0,025
E ±0,025 ±0,025 ±0,025
G ±0,025 ±0,025 ±0,13
M See tables on next page ±0,13
U See tables on next page ±0,13
WID_Master16_Turning_Inserts_B108_B109_Metric_REBRAND.indd 108 11/11/15 5:38 PM
B109
LViWID M 16 T i I B108 B109 M i REBRANDN b 11 201510 47AM
widia.com
VariTurn™ Inserts
Catalogue Numbering System
By referencing this easy-to-use guide, you can
identify the correct product to meet your needs.
04 08 6P
Thickness
S
Corner
Radius “R¡”
Hand of Insert
(optional)
Cutting Edge
(optional)
Chipbreaker
(optional)
R
= Right hand
F
Sharp
L
= Left hand
E
Rounded
N
= Neutral
T
Chamfered
S
Chamfered
and Rounded
KDouble-
Chamfered
PDouble-
Chamfered
and Rounded
CNMG1204086P
1P = Finishing
2P = Finishing
..GP = Medium
Machining
4P = Medium
Machining
6P = Medium
Roughing
..MA = Roughing
7N = Heavy
Roughing
symbol thickness
mm mm
— 0,79
T0 1,00
01 1,59
T1 1,98
02 2,38
03 3,18
T3 3,97
04 4,76
05 5,56
06 6,35
07 7,94
9 9,52
11 11,11
12 12,70
symbol
corner
radius
mm mm
X0 0,04
01 0,1
02 0,2
04 0,4
08 0,8
12 1,2
16 1,6
20 2,0
24 2,4
28 2,8
32 3,2
00
round
insert
M0
—
R
L
N
± Tolerance on “D” ± Tolerance on “B”
Class M Tolerance
Class U
Tolerance Class M Tolerance
Class U
Tolerance
“D”
Shapes
S, T, C, R,
& W
Shape
D
Shape
V
Shapes
S, T, & C “D”
Shapes
S, T, C, R,
& W
Shape
D
Shape
V
Shapes
S, T, & C
mm mm mm mm mm mm mm mm mm mm
3,97 0,05 –– – 3,97 0,08 –– –
4,76 0,05 – – 0,08 4,76 0,08 – – 0,13
5,56 0,05 0,05 0,05 0,08 5,56 0,08 0,11 – 0,13
6,35 0,05 0,05 0,05 0,08 6,35 0,08 0,11 – 0,13
7,94 0,05 0,05 0,05 0,08 7,94 0,08 0,11 – 0,13
9,52 0,05 0,05 0,05 0,08 9,52 0,08 0,11 0,18 0,13
11,11 0,08 0,08 0,08 0,13 11,11 0,13 0,15 ––
12,70 0,08 0,08 0,08 0,13 12,70 0,13 0,15 0,25 0,20
14,29 0,08 0,08 0,08 0,13 14,29 0,13 0,15 ––
15,88 0,10 0,10 0,10 0,18 15,88 0,15 0,18 –0,27
17,46 0,10 0,10 0,10 0,18 17,46 0,15 0,18 – 0,27
19,05 0,10 0,10 0,10 0,18 19,05 0,15 0,18 – 0,27
22,22 0,13 – – 0,25 22,22 0,15 – –0,38
25,40 0,13 – – 0,25 25,40 0,18 – – 0,38
31,75 0,15 – – 0,25 31,75 0,20 – – 0,38
WID_Master16_Turning_Inserts_B108_B109_Metric_REBRAND.indd 109 11/11/15 5:38 PM
widia.com
B110
LViWID M 16 T i I B110 B111 M i REBRAND N b 11 2015 10 49 AM
WIDIA™ VariTurn
Grade Numbering System
A system of grades, geometries, and application guidelines to provide optimal solutions for your
metalcutting needs. It’s easy to determine which WIDIA™ chip-control cutting tool will work best in
your speci c workpiece materials and applications!
TN 15 M
Brand Relative Hardness
(ISO 513)
Primary
Workpiece
Material (ISO 513)
TN = WIDIA
01 =
Hardest
10
20
30
40
50
=Toughest
PSteel
MStainless Steel
KCast Iron
NNon-Ferrous
SHigh-Temp Alloys
HHardened Materials
UUniversal Machining
WID_Master16_Turning_Inserts_B110_B111_Metric_REBRAND.indd 110 11/11/15 5:38 PM
• Proprietary features provide superior surface fi nish and increased productivity.
• Wide product offering — from boring bars, extensions, and holders to rotating
adaptors and modular sections.
• Reduce setup time with KM™ Quick Change Tooling — now an ISO Standard!
• Customise WIDIA pre-tuned boring bars — after they’re on the machine —
to optimise performance in your specifi c machining operations.
For tighter tolerances, reduced scrap rates, and improved tool life,
you can rely on WIDIA Tunable Tooling!
WIDIA™
Tunable Tooling
Internal dampening package eliminates chatter, vibration,
and harmonics in all your deep-hole boring applications!
To learn more, contact your local Authorised Distributor or visit widia.com
WID_Master16_Turning_Inserts_B110_B111_Metric_REBRAND.indd 111 11/11/15 5:38 PM
B112
LViWID M 16 T i I B112 B113 M i REBRAND O b 15 2015 9 36 AM
widia.com
WIDIA™ VariTurn™
Steel • Carbon, Alloy, and Tool Steels up to 450 HB (48 HRC)
Step 1 • Select the insert geometry
Negative Inserts Positive Inserts
feed rate (mm/rev) feed rate (mm/rev)
depth of cut (in)
depth of cut (mm)
depth of cut (in)
depth of cut (mm)
2P
Finishing
1P
Finishing
6P
Roughing
7N
Heavy Roughing
feed rate (in/rev) feed rate (in/rev)
Step 2 • Select the grade
cutting condition
Negative Insert Geometry Positive Insert Geometry
2P 6P 7N 1P
heavily interrupted cut TN30P TN30P TN30P TN30P
lightly interrupted cut TN20P/TN30P TN20P/TN30P TN20P/TN30P TN20P
varying depth of cut,
casting, or forging skin TN20P/TN30P TN20P/TN30P TN20P/TN30P TN10P
smooth cut, pre-turned surface TN10P TN10P TN10P TN10P
(continued)
WID_Master16_Turning_Inserts_B112_B113_Metric_REBRAND.indd 112 10/30/15 2:50 PM
B113
LViWID M 16 T i I B112 B113 M i REBRANDO b 15 20159 36AM
widia.com
WIDIA™ VariTurn™
Steel • Carbon, Alloy, and Tool Steels up to 450 HB (48 HRC)
Step 3 • Selecting the cutting speed
Alloy Steels and Tool Steels
()330 HB) ()35 HRC) speed — m/min Starting Conditions
Material
Group grade 135 180 225 275 320 360 410 455 495 m/min
P3
TN10P 152
TN20P 140
TN30P 108
Medium- and High-Carbon Steels
(>0.3% C) speed — m/min Starting Conditions
Material
Group grade 135 180 225 275 320 360 410 455 495 m/min
P2
TN10P 212
TN20P 176
TN30P 135
Low-Carbon (<0.3% C)
and Free-Machining Steel speed — m/min Starting Conditions
Material
Group grade 135 180 225 275 320 360 410 455 495 m/min
P0/P1
TN10P 316
TN20P 248
TN30P 189
Ferritic, Martensitic, and PH Stainless Steels
(340–450 HB) (36–48 HRC) speed — m/min Starting Conditions
Material
Group grade 105 135 165 195 225 255 285 315 345 m/min
P6
TN10P 144
TN20P 135
TN30P 95
Ferritic, Martensitic, and PH Stainless Steels
()330 HB) ()35 HRC) speed — m/min Starting Conditions
Material
Group grade 120 150 180 210 240 270 300 330 360 m/min
P5
TN10P 172
TN20P 176
TN30P 122
Alloy Steels and Tool Steels
(340–450 HB) (36–48 HRC) speed — m/min Starting Conditions
Material
Group grade 60 90 120 150 180 210 240 270 300 m/min
P4
TN10P 116
TN20P 95
TN30P 86
(continued)
WID_Master16_Turning_Inserts_B112_B113_Metric_REBRAND.indd 113 10/30/15 2:50 PM
B114
LViWID M 16 T i I B114 B115 M i REBRAND O b 15 2015 9 36 AM
widia.com
WIDIA™ VariTurn™
Stainless Steel • Austenitic Stainless Steels
Step 1 • Select the insert geometry
Step 2 • Select the grade
cutting condition
Negative Insert
Geometry
Positive Insert
Geometry
2P 4P 6P 1P
heavily interrupted cut TN15M/TN10 TN30M TN30M TN30M/TN10
lightly interrupted cut TN15M/TN10 TN30M TN30M TN30M
varying depth of cut,
casting, or forging skin TN15M TN15M/TN30M TN15M/TN30M TN15M/TN30M
smooth cut, pre-turned surface TN15M TN15M TN15M TN15M
Negative Inserts Positive Inserts
feed rate (mm/rev) feed rate (mm/rev)
depth of cut (in)
depth of cut (mm)
depth of cut (in)
depth of cut (mm)
2P
Finishing
1P
Finishing
4P
Medium
feed rate (in/rev) feed rate (in/rev)
6P
Roughing
Austenitic Stainless Steel speed — m/min Starting Conditions
Material
Group grade 90 135 180 225 270 315 360 405 450 m/min
M1
TN15M 162
TN30M 135
TN10U 194
TN15U 129
Step 3 • Selecting the cutting speed
Austenitic Stainless Steel: Duplex
(Ferritic and Austenitic Mixture) speed — m/min Starting Conditions
Material
Group grade 90 135 180 225 270 315 360 405 450 m/min
M3
TN15M 135
TN30M 108
TN10U 167
TN15U 111
Austenitic Stainless Steel speed — m/min Starting Conditions
Material
Group grade 90 135 180 225 270 315 360 405 450 m/min
M2
TN15M 149
TN30M 135
TN10U 180
TN15U 120
WID_Master16_Turning_Inserts_B114_B115_Metric_REBRAND.indd 114 10/30/15 2:50 PM
B115
LViWID M 16 T i I B114 B115 M i REBRANDO b 15 20159 36AM
widia.com
WIDIA™ VariTurn™
Cast Iron •Grey and Ductile Irons
Step 1 • Select the insert geometry
Negative Inserts Positive Inserts
feed rate (mm/rev) feed rate (mm/rev)
depth of cut (in)
depth of cut (mm)
depth of cut (in)
depth of cut (mm)
2P
Finishing
1P
Finishing
..MA
Heavy Roughing
feed rate (in/rev) feed rate (in/rev)
7N
Heavy Roughing
Step 2 • Select the grade
cutting condition
Negative Insert Geometry Positive Insert Geometry
2P ..MA 7N 1P
heavily interrupted cut TN20K TN20K TN20K TN20K
lightly interrupted cut TN20K TN20K TN20K TN20K
varying depth of cut,
casting, or forging skin TN20K TN20K TN20K TN20K
smooth cut, pre-turned surface TN20K TN20K TN20K TN20K
Step 3 • Selecting the cutting speed
Ductile, Compacted Graphite, and Malleable Cast Irons
(>80 KSI tensile strength) speed — m/min Starting Conditions
Material
Group grade 60 150 240 330 420 510 600 690 780 m/min
K3 TN20K 189
Ductile, Compacted Graphite, and Malleable Cast Irons
(<80 KSI tensile strength) speed — m/min Starting Conditions
Material
Group grade 60 150 240 330 420 510 600 690 780 m/min
K2 TN20K 216
Grey Cast Iron speed — m/min Starting Conditions
Material
Group grade 60 150 240 330 420 510 600 690 780 m/min
K1 TN20K 270
WID_Master16_Turning_Inserts_B114_B115_Metric_REBRAND.indd 115 10/30/15 2:50 PM
B116
LViWID M 16 T i I B116 B117 M i REBRAND O b 15 2015 9 37 AM
widia.com
WIDIA™ VariTurn™
High-Temp Alloys •Iron-, Cobalt-, Nickel-Based, and Titanium Alloys
Step 1 • Select the insert geometry
Negative Inserts Positive Inserts
feed rate (mm/rev) feed rate (mm/rev)
depth of cut (in)
depth of cut (mm)
depth of cut (in)
depth of cut (mm)
2P
Finishing
1P
Finishing
..GP
Medium
feed rate (in/rev) feed rate (in/rev)
Step 2 • Select the grade
cutting condition
Negative Insert Geometry Positive Insert Geometry
2P ..GP 1P
heavily interrupted cut TN15U – TN15U
lightly interrupted cut TN10U TN10U TN15U
varying depth of cut,
casting, or forging skin TN10U TN10U TN10U
smooth cut, pre-turned surface TN10U TN10U TN10U
Titanium and Titanium Alloys
(110–450 HB) ()48 HRC) speed — m/min Starting Conditions
Material
Group grade 15 45 75 105 140 170 200 230 260 m/min
S4 TN10U 63
TN15U 42
Nickel-Based, Heat-Resistant Alloys
(140–475 HB) ()48 HRC) speed — m/min Starting Conditions
Material
Group grade 15 45 75 105 140 170 200 230 260 m/min
S3 TN10U 63
TN15U 42
Cobalt-Based, Heat-Resistant Alloys
(150–425 HB) ()45 HRC) speed — m/min Starting Conditions
Material
Group grade 15 45 75 105 140 170 200 230 260 m/min
S2 TN10U 54
TN15U 36
Iron-Based, Heat-Resistant Alloys
(135–320 HB) ()34 HRC) speed — m/min Starting Conditions
Material
Group grade 15 45 75 105 140 170 200 230 260 m/min
S1 TN10U 50
TN15U 33
Step 3 • Select the cutting speed
WID_Master16_Turning_Inserts_B116_B117_Metric_REBRAND.indd 116 10/30/15 2:50 PM
B117
LViWID M 16 T i I B116 B117 M i REBRANDO b 15 20159 37AM
widia.com
WIDIA™ VariTurn™
Chipbreaker Geometries
Positive and Negative Inserts
Cutting Edge
Corner Radius
Cutting Edge
Corner Radius
Cutting Edge
1P
Preferred for light nishing. Low cutting forces and reduced power requirements
due to positive rake angle. Good chip control over a wide range. P
ap
M
depth of cut (mm)
K
S
feed rate (mm) fn
2P
For nish turning, producing smooth, accurate surfaces. Very good chip control,
especially at low depths of cut. P
ap
M
depth of cut (mm)
K
S
feed rate (mm) fn
4P
For medium-duty turning operations. Soft-cutting chipbreaker. Used in applications
producing varying chip sections, such as pro le or copy turning. Good dimensional accuracy.
For soft steel materials and stainless steels.
ap
M
depth of cut (mm)
feed rate (mm) fn
Corner Radius
(continued)
WID_Master16_Turning_Inserts_B116_B117_Metric_REBRAND.indd 117 10/30/15 2:50 PM
B118
LViWID M 16 T i I B118 B119 M i REBRAND O b 15 2015 9 37 AM
widia.com
WIDIA™ VariTurn™
Chipbreaker Geometries
Positive and Negative Inserts
Cutting Edge
Corner Radius
Cutting Edge
Corner Radius
6P
For medium to rough turning. Outstanding chip control due to specially con gured
chipbreaker element in corner area. Good chip forming with low depths of cut. P
ap
M
depth of cut (mm)
feed rate (mm) fn
7N
For medium-duty to roughing. Outstanding chip control. High edge strength for interrupted
cuts, forging skin, or scale. Preferred for all cast iron such as grey, malleable, and nodular. P
ap
depth of cut (mm)
K
feed rate (mm) fn
(continued)
(continued)
WID_Master16_Turning_Inserts_B118_B119_Metric_REBRAND.indd 118 10/30/15 2:50 PM
B119
LViWID M 16 T i I B118 B119 M i REBRANDO b 15 20159 37AM
widia.com
WIDIA™ VariTurn™
..MA
Flat top geometry for machining cast iron. For nishing to roughing applications.
ap
depth of cut (mm)
K
feed rate (mm) fn
Chipbreaker Geometries
..GP
For light machining to light roughing.
ap
depth of cut (mm)
S
feed rate (mm) fn
Positive and Negative Inserts
Cutting Edge
Corner Radius
Cutting Edge
(continued)
WID_Master16_Turning_Inserts_B118_B119_Metric_REBRAND.indd 119 10/30/15 2:50 PM
B120
LViWID M 16 T i I B120 B121 M i REBRAND O b 15 2015 9 37 AM
widia.com
Coatings provide high-speed
capability and are engineered
for fi nishing to heavy roughing.
Grade
PSteel
MStainless Steel
KCast Iron
NNon-Ferrous
SHigh-Temp Alloys
HHardened Materials
wear
resistance
toughness
Coating Grade Description 05 10 15 20 25 30 35 40 45
TN10P
Coated carbide. MTCVD-TiN-TiCN-Al2O3-TiN. Ideal for light nishing to medium
machining applications. Superior wear resistance.
P
K
HC-P10
TN30P
Coated carbide. MTCVD-TiN-TiCN-Al2O3-TiN. Tough carbide grade.
Ideal for roughing and heavy roughing applications.
P
HC-P30
TN20P
Coated carbide. MTCVD-TiN-TiCN-Al2O3-TiN. Great general-purpose turning grade
for steels. Ideal for semi- nishing to moderately heavy roughing.
P
K
HC-P20
TN15M
Coated carbide. MTCVD-TiN-TiCN-Al2O3-TiN. Ideal for general-purpose machining
of stainless steels.
P
M
S
HC-M15
WIDIA™ VariTurn™
Grades and Grade Descriptions
WID_Master16_Turning_Inserts_B120_B121_Metric_REBRAND.indd 120 10/30/15 2:50 PM
B121
LViWID M 16 T i I B120 B121 M i REBRANDO b 15 20159 37AM
widia.com
WIDIA™ VariTurn™
Grades and Grade Descriptions
Coatings provide high-speed
capability and are engineered
for fi nishing to heavy roughing.
Grade
PSteel
MStainless Steel
KCast Iron
NNon-Ferrous
SHigh-Temp Alloys
HHardened Materials
TN30M
Coated carbide. MTCVD-TiN-TiCN-Al2O3-TiN. Ideal for general-purpose
machining of stainless steels.
P
M
S
HC-M30
wear
resistance toughness
Coating Grade Description 05 10 15 20 25 30 35 40 45
TN20K
Coated carbide. MTCVD-TiN-TiCN-Al2O3-TiN. Great when used for straight
or lightly interrupted cut applications of ductile and cast irons.
P
K
HC-K20
TN10U
Coated carbide. PVD-TiAlN-TiN. Ideal for nishing of dif cult to machine
alloys and stainless steels.
P
M
K
N
S
HC-S10
TN15U
Uncoated carbide. Excellent abarasion resistance for machining cast irons,
austentic stainless steels, and most high-temperature alloys.
P
M
K
N
S
HW-P15
WID_Master16_Turning_Inserts_B120_B121_Metric_REBRAND.indd 121 10/30/15 2:50 PM
B122
LViWID M 16 T i I B122 B123 M i REBRAND N b 11 2015 7 31 AM
widia.com
CCGT-1P
ISO
catalogue number D L10 S R¡D1
TN10P
TN20P
TN30P
TN15M
TN30M
TN20K
TN10U
TN15U
CCGT0602021P 6,35 6,45 2,38 0,2 2,80
–
–
–
–
–
–
4163978
4163979
CCGT0602041P 6,35 6,45 2,38 0,4 2,80
–
–
–
–
–
–
4163980
4163981
CCGT0602081P 6,35 6,45 2,38 0,8 2,80
–
–
–
–
–
–
4163982
–
CCGT09T3011P 9,53 9,67 3,97 0,1 4,40
–
–
–
–
–
–
4164495
4164496
CCGT09T3021P 9,53 9,67 3,97 0,2 4,40
–
–
–
–
–
–
4164493
4164494
CCGT09T3041P 9,53 9,67 3,97 0,4 4,40
–
–
–
–
–
–
4164497
4164498
CCGT09T3081P 9,53 9,67 3,97 0,8 4,40
–
–
–
–
–
–
4164499
4164500
rst choice
alternate choice
P
M
K
N
S
H
Inserts
WIDIA™ VariTurn™
Inserts
WID_Master16_Turning_Inserts_B122_B123_Metric_REBRAND.indd 122 11/11/15 9:21 AM
B123
LViWID M 16 T i I B122 B123 M i REBRANDN b 11 20157 31AM
WIDIA™ VariTurn™
CCMT-1P
ISO
catalogue number D L10 S R¡D1
TN10P
TN20P
TN30P
TN15M
TN30M
TN20K
TN10U
TN15U
CCMT0602021P 6,35 6,45 2,38 0,2 2,80
4165244
–
–
4166242
4166323
4165245
4166324
4166325
CCMT0602041P 6,35 6,45 2,38 0,4 2,80
4166326
4166327
–
4166329
4166330
4166328
4166331
4166332
CCMT0602081P 6,35 6,45 2,38 0,8 2,80
4166333
4166334
–
4166336
4166337
4166335
4166338
–
CCMT09T3021P 9,53 9,67 3,97 0,2 4,40
–
–
–
–
–
–
4166339
4166340
CCMT09T3041P 9,53 9,67 3,97 0,4 4,40
4166341
4166342
–
4166344
4166345
4166343
4166346
4166347
CCMT09T3081P 9,53 9,67 3,97 0,8 4,40
4166348
4166349
–
4166351
4166352
4166350
4166353
4166354
CCMT1204041P 12,70 12,90 4,76 0,4 5,50
4166355
4166356
–
4166358
4166359
4166357
4166558
–
CCMT1204081P 12,70 12,90 4,76 0,8 5,50
4166559
4166560
–
4166562
4166623
4166561
4166624
–
rst choice
alternate choice
Inserts
P
M
K
N
S
H
Inserts
C2–C49 C50–C81 C86–C129 B8–B25 B26–B28 B30–B105
WID_Master16_Turning_Inserts_B122_B123_Metric_REBRAND.indd 123 11/11/15 9:21 AM
B124
LViWID M 16 T i I B124 B125 M i REBRAND O b 15 2015 9 38 AM
widia.com
WIDIA™ VariTurn™
CNGP
ISO
catalogue number D L10 S R¡D1
TN10P
TN20P
TN30P
TN15M
TN30M
TN20K
TN10U
TN15U
CNGP120401 12,70 12,90 4,76 0,1 5,16
–
–
–
–
–
–
4164565
–
CNGP120402 12,70 12,90 4,76 0,2 5,16
–
–
–
–
–
–
4164564
–
CNGP120404 12,70 12,90 4,76 0,4 5,16
–
–
–
–
–
–
4164566
4164567
CNGP120408 12,70 12,90 4,76 0,8 5,16
–
–
–
–
–
–
4164568
4164569
CNGP120412 12,70 12,90 4,76 1,2 5,16
–
–
–
–
–
–
4164570
4164571
rst choice
alternate choice
Inserts
P
M
K
N
S
H
Inserts
WID_Master16_Turning_Inserts_B124_B125_Metric_REBRAND.indd 124 10/30/15 2:50 PM
B125
LViWID M 16 T i I B124 B125 M i REBRANDO b 15 20159 38AM
WIDIA™ VariTurn™
CNMA
ISO
catalogue number D L10 S R¡D1
TN10P
TN20P
TN30P
TN15M
TN30M
TN20K
TN10U
TN15U
CNMA120404 12,70 12,90 4,76 0,4 5,16
–
–
–
–
–
4165470
–
–
CNMA120408 12,70 12,90 4,76 0,8 5,16
–
–
–
–
–
4165471
–
–
CNMA120412 12,70 12,90 4,76 1,2 5,16
–
–
–
–
–
4165472
–
–
CNMA120416 12,70 12,90 4,76 1,6 5,16
–
–
–
–
–
4165833
–
–
CNMA160612 15,88 16,12 6,35 1,2 6,35
–
–
–
–
–
4165834
–
–
CNMA160616 15,88 16,12 6,35 1,6 6,35
–
–
–
–
–
4165835
–
–
CNMA190612 19,05 19,34 6,35 1,2 7,93
–
–
–
–
–
4165836
–
–
CNMA190616 19,05 19,34 6,35 1,6 7,93
–
–
–
–
–
4165837
–
–
rst choice
alternate choice
Inserts
P
M
K
N
S
H
Inserts
C2–C49 C50–C81 C86–C129 B8–B25 B26–B28 B30–B105
WID_Master16_Turning_Inserts_B124_B125_Metric_REBRAND.indd 125 10/30/15 2:50 PM
B126
LViWID M 16 T i I B126 B127 M i REBRAND O b 15 2015 9 38 AM
widia.com
WIDIA™ VariTurn™
CNMG-2P
ISO
catalogue number D L10 S R¡D1
TN10P
TN20P
TN30P
TN15M
TN30M
TN20K
TN10U
TN15U
CNMG1204042P 12,70 12,90 4,76 0,4 5,16
4166171
4166172
–
4166244
4166245
4166243
4166246
4166247
CNMG1204082P 12,70 12,90 4,76 0,8 5,16
4166248
4166249
–
4166251
4166252
4166250
4166253
4166254
CNMG1204122P 12,70 12,90 4,76 1,2 5,16
4166255
4166256
–
4166258
–
4166257
4166259
–
rst choice
alternate choice
Inserts
P
M
K
N
S
H
Inserts
CNMG-4P
ISO
catalogue number D L10 S R¡D1
TN10P
TN20P
TN30P
TN15M
TN30M
TN20K
TN10U
TN15U
CNMG1204044P 12,70 12,90 4,76 0,4 5,16
–
5359116
–
4165830
4165831
–
5359117
–
CNMG1204084P 12,70 12,90 4,76 0,8 5,16
–
5359118
–
4165832
4165853
–
5359119
–
CNMG1204124P 12,70 12,90 4,76 1,2 5,16
–
5359240
–
4165854
4165855
–
5359241
–
CNMG1606124P 15,88 16,12 6,35 1,2 6,35
–
–
–
4165856
4165857
–
–
–
CNMG1906124P 19,05 19,34 6,35 1,2 7,93
–
–
–
4165858
4165859
–
–
–
WID_Master16_Turning_Inserts_B126_B127_Metric_REBRAND.indd 126 10/30/15 2:50 PM
B127
LViWID M 16 T i I B126 B127 M i REBRANDO b 15 20159 38AM
WIDIA™ VariTurn™
CNMG-6P
ISO
catalogue number D L10 S R¡D1
TN10P
TN20P
TN30P
TN15M
TN30M
TN20K
TN10U
TN15U
CNMG0903086P 9,53 9,67 3,18 0,8 3,81
4165948
4165949
–
4165950
4165951
–
–
–
CNMG1204046P 12,70 12,90 4,76 0,4 5,16
4165952
4165963
–
4165964
4165965
–
–
–
CNMG1204086P 12,70 12,90 4,76 0,8 5,16
4165966
4165967
4165968
4165969
4165970
–
–
–
CNMG1204126P 12,70 12,90 4,76 1,2 5,16
4165971
4165972
4165973
4165974
4165975
–
–
–
CNMG1606126P 15,88 16,12 6,35 1,2 6,35
–
4165976
4165977
4165978
4165979
–
–
–
CNMG1906126P 19,05 19,34 6,35 1,2 7,93
–
4165980
4165981
4165982
4165983
–
–
–
rst choice
alternate choice
Inserts
P
M
K
N
S
H
Inserts
C2–C49 C50–C81 C86–C129 B8–B25 B26–B28 B30–B105
WID_Master16_Turning_Inserts_B126_B127_Metric_REBRAND.indd 127 10/30/15 2:50 PM
B128
LViWID M 16 T i I B128 B129 M i REBRAND O b 15 2015 9 39 AM
widia.com
WIDIA™ VariTurn™
rst choice
alternate choice
Inserts
P
M
K
N
S
H
CNMG-7N
ISO
catalogue number D L10 S R¡D1
TN10P
TN20P
TN30P
TN15M
TN30M
TN20K
TN10U
TN15U
CNMG1204047N 12,70 12,90 4,76 0,4 5,16
4166386
4166387
–
–
–
4166388
–
–
CNMG1204087N 12,70 12,90 4,76 0,8 5,16
4166389
4166390
4166391
–
–
4166392
–
–
CNMG1204127N 12,70 12,90 4,76 1,2 5,16
4166433
4166434
4166435
–
–
4166436
–
–
CNMG1204167N 12,70 12,90 4,76 1,6 5,16
4166437
4166438
–
–
–
4166439
–
–
CNMG1606127N 15,88 16,12 6,35 1,2 6,35
4166440
4166441
4166442
–
–
4166443
–
–
CNMG1606167N 15,88 16,12 6,35 1,6 6,35
4166444
4166445
–
–
–
4166446
–
–
CNMG1906087N 19,05 19,34 6,35 0,8 7,93
4166447
–
–
–
–
4166448
–
–
CNMG1906127N 19,05 19,34 6,35 1,2 7,93
4166449
4166450
4166451
–
–
4166452
–
–
CNMG1906167N 19,05 19,34 6,35 1,6 7,93
4166453
4166454
4166455
–
–
4166456
–
–
CNMG2509247N 25,40 25,79 9,53 2,4 9,12
–
–
4166457
–
–
–
–
–
Inserts
WID_Master16_Turning_Inserts_B128_B129_Metric_REBRAND.indd 128 10/30/15 2:51 PM
B129
LViWID M 16 T i I B128 B129 M i REBRANDO b 15 20159 39AM
WIDIA™ VariTurn™
DCGT-1P
ISO
catalogue number D L10 S R¡D1
TN10P
TN20P
TN30P
TN15M
TN30M
TN20K
TN10U
TN15U
DCGT0702011P 6,35 7,75 2,38 0,1 2,80
–
–
–
–
–
–
4164501
4164502
DCGT11T3011P 9,53 11,63 3,97 0,1 4,40
–
–
–
–
–
–
4164523
4164524
DCGT1504081P 12,70 15,50 4,76 0,8 5,50
–
–
–
–
–
–
4164525
–
rst choice
alternate choice
Inserts
P
M
K
N
S
H
Inserts
DCMT-1P
ISO
catalogue number D L10 S R¡D1
TN10P
TN20P
TN30P
TN15M
TN30M
TN20K
TN10U
TN15U
DCMT0702021P 6,35 7,75 2,38 0,2 2,80
–
–
–
–
–
–
4166625
4166626
DCMT0702041P 6,35 7,75 2,38 0,4 2,80
4166627
4166628
–
4166630
4166631
4166629
4166632
4166633
DCMT11T3021P 9,53 11,63 3,97 0,2 4,40
–
–
–
–
–
–
4166634
4166635
DCMT11T3041P 9,53 11,63 3,97 0,4 4,40
4166636
4166637
–
4166639
4166640
4166638
4166641
4166642
DCMT11T3081P 9,53 11,63 3,97 0,8 4,40
4166643
4166644
–
4166646
4166647
4166645
4166648
–
DCMT11T3121P 9,53 11,63 3,97 1,2 4,40
4166649
–
–
4166651
–
4166650
4166652
–
DCMT1504041P 12,70 15,50 4,76 0,4 5,50
4166653
4166654
–
–
–
4166655
–
–
DCMT1504081P 12,70 15,50 4,76 0,8 5,50
4166656
4166657
–
–
–
4166361
–
–
C2–C49 C50–C81 C86–C129 B8–B25 B26–B28 B30–B105
WID_Master16_Turning_Inserts_B128_B129_Metric_REBRAND.indd 129 10/30/15 2:51 PM
B130
LViWID M 16 T i I B130 B131 M i REBRAND O b 15 2015 9 39 AM
widia.com
WIDIA™ VariTurn™
DNGP
ISO
catalogue number D L10 S R¡D1
TN10P
TN20P
TN30P
TN15M
TN30M
TN20K
TN10U
TN15U
DNGP150401 12,70 15,50 4,76 0,1 5,16
–
–
–
–
–
–
4164784
–
DNGP150402 12,70 15,50 4,76 0,2 5,16
–
–
–
–
–
–
4164572
4164783
DNGP150404 12,70 15,50 4,76 0,4 5,16
–
–
–
–
–
–
4164785
4164786
DNGP150408 12,70 15,50 4,76 0,8 5,16
–
–
–
–
–
–
4164787
4164788
rst choice
alternate choice
Inserts
P
M
K
N
S
H
Inserts
DNMA
ISO
catalogue number D L10 S R¡D1
TN10P
TN20P
TN30P
TN15M
TN30M
TN20K
TN10U
TN15U
DNMA150408 12,70 15,50 4,76 0,8 5,16
–
–
–
–
–
4165838
–
–
DNMA150608 12,70 15,50 6,35 0,8 5,16
–
–
–
–
–
4165840
–
–
DNMA150412 12,70 15,50 4,76 1,2 5,16
–
–
–
–
–
4165839
–
–
DNMA150612 12,70 15,50 6,35 1,2 5,16
–
–
–
–
–
4165841
–
–
WID_Master16_Turning_Inserts_B130_B131_Metric_REBRAND.indd 130 10/30/15 2:51 PM
B131
LViWID M 16 T i I B130 B131 M i REBRANDO b 15 20159 39AM
WIDIA™ VariTurn™
DNMG-2P
ISO
catalogue number D L10 S R¡D1
TN10P
TN20P
TN30P
TN15M
TN30M
TN20K
TN10U
TN15U
DNMG1504042P 12,70 15,50 4,76 0,4 5,16
4166260
4166261
–
4166263
4166264
4166262
4166265
4166266
DNMG1506042P 12,70 15,50 6,35 0,4 5,16
4166825
4166826
–
4166828
–
4166827
4166829
4166830
DNMG1504082P 12,70 15,50 4,76 0,8 5,16
4166267
4166269
–
4166273
4166275
4166271
4166277
4166279
DNMG1506082P 12,70 15,50 6,35 0,8 5,16
4166831
4166832
–
4166844
–
4166843
4166845
4166846
DNMG1506122P 12,70 15,50 6,35 1,2 5,16
4166847
4166848
–
4166850
4166851
4166849
4166852
–
rst choice
alternate choice
Inserts
P
M
K
N
S
H
Inserts
DNMG-4P
ISO
catalogue number D L10 S R¡D1
TN10P
TN20P
TN30P
TN15M
TN30M
TN20K
TN10U
TN15U
DNMG1504044P 12,70 15,50 4,76 0,4 5,16
–
–
–
4165860
4165861
–
–
–
DNMG1506044P 12,70 15,50 6,35 0,4 5,16
–
5359244
–
4165864
4165865
–
–
–
DNMG1504084P 12,70 15,50 4,76 0,8 5,16
–
5359242
–
4165862
4165863
–
5359243
–
DNMG1506084P 12,70 15,50 6,35 0,8 5,16
–
5359245
–
4165866
4165867
–
–
–
DNMG1506124P 12,70 15,50 6,35 1,2 5,16
–
–
–
4165868
4165869
–
–
–
C2–C49 C50–C81 C86–C129 B8–B25 B26–B28 B30–B105
WID_Master16_Turning_Inserts_B130_B131_Metric_REBRAND.indd 131 10/30/15 2:51 PM
B132
LViWID M 16 T i I B132 B133 M i REBRAND O b 15 2015 9 39 AM
widia.com
WIDIA™ VariTurn™
DNMG-6P
ISO
catalogue number D L10 S R¡D1
TN10P
TN20P
TN30P
TN15M
TN30M
TN20K
TN10U
TN15U
DNMG1104086P 9,53 11,63 4,76 0,8 3,81
4165984
4165985
–
–
4165986
–
–
–
DNMG1504046P 12,70 15,50 4,76 0,4 5,16
4165987
4165988
–
4165989
4165990
–
–
–
DNMG1506046P 12,70 15,50 6,35 0,4 5,16
4166767
4166768
–
4166769
4166770
–
–
–
DNMG1504086P 12,70 15,50 4,76 0,8 5,16
4165991
4165992
4165993
4165994
4165995
–
–
–
DNMG1506086P 12,70 15,50 6,35 0,8 5,16
4166771
4166772
4166793
4166794
4166795
–
–
–
DNMG1504126P 12,70 15,50 4,76 1,2 5,16
4165996
4165997
–
4166765
4166766
–
–
–
DNMG1506126P 12,70 15,50 6,35 1,2 5,16
4166796
4166797
4166798
4166799
4166800
–
–
–
DNMG1906126P 15,88 19,38 6,35 1,2 6,35
–
–
4166801
–
–
–
–
–
rst choice
alternate choice
Inserts
P
M
K
N
S
H
Inserts
WID_Master16_Turning_Inserts_B132_B133_Metric_REBRAND.indd 132 10/30/15 2:51 PM
B133
LViWID M 16 T i I B132 B133 M i REBRANDO b 15 20159 39AM
WIDIA™ VariTurn™
DNMG-7N
ISO
catalogue number D L10 S R¡D1
TN10P
TN20P
TN30P
TN15M
TN30M
TN20K
TN10U
TN15U
DNMG1504047N 12,70 15,50 4,76 0,4 5,16
4166458
4166459
–
–
–
–
–
–
DNMG1504087N 12,70 15,50 4,76 0,8 5,16
4166460
4166461
4166462
–
–
4166463
–
–
DNMG1506087N 12,70 15,50 6,35 0,8 5,16
4166484
4166485
4166486
–
–
4166487
–
–
DNMG1504127N 12,70 15,50 4,76 1,2 5,16
4166464
4166465
4166432
–
–
4166483
–
–
DNMG1506127N 12,70 15,50 6,35 1,2 5,16
4166488
4166489
4166490
–
–
4166491
–
–
DNMG1906127N 15,88 19,38 6,35 1,2 6,35
–
4166492
4166493
–
–
–
–
–
rst choice
alternate choice
Inserts
P
M
K
N
S
H
Inserts
RNMG-7N
ISO
catalogue number D S D1
TN10P
TN20P
TN30P
TN15M
TN30M
TN20K
TN10U
TN15U
RNMG12047N 12,70 4,76 5,16
–
4166494
–
–
–
4166495
–
–
RNMG19067N 19,05 6,35 7,93
4166496
4166497
–
–
–
–
–
–
C2–C49 C50–C81 C86–C129 B8–B25 B26–B28 B30–B105
WID_Master16_Turning_Inserts_B132_B133_Metric_REBRAND.indd 133 10/30/15 2:51 PM
B134
LViWID M 16 T i I B134 B135 M i REBRAND O b 15 2015 9 39 AM
widia.com
WIDIA™ VariTurn™
SCMT-1P
ISO
catalogue number D L10 S R¡D1
TN10P
TN20P
TN30P
TN15M
TN30M
TN20K
TN10U
TN15U
SCMT09T3041P 9,53 9,53 3,97 0,4 4,40
4166362
4166393
–
4166395
4166396
4166394
4166397
–
SCMT09T3081P 9,53 9,53 3,97 0,8 4,40
4166398
4166399
–
4166401
4166402
4166400
4166403
–
SCMT1204041P 12,70 12,70 4,76 0,4 5,50
–
–
–
–
–
–
4166404
–
SCMT1204081P 12,70 12,70 4,76 0,8 5,50
4166405
4166406
–
4166408
4166409
4166407
4166410
–
rst choice
alternate choice
Inserts
P
M
K
N
S
H
Inserts
SNMA
ISO
catalogue number D L10 S R¡D1
TN10P
TN20P
TN30P
TN15M
TN30M
TN20K
TN10U
TN15U
SNMA120408 12,70 12,70 4,76 0,8 5,16
–
–
–
–
–
4165842
–
–
SNMA120412 12,70 12,70 4,76 1,2 5,16
–
–
–
–
–
4165843
–
–
SNMA150612 15,88 15,88 6,35 1,2 6,35
–
–
–
–
–
4165844
–
–
SNMA190612 19,05 19,05 6,35 1,2 7,93
–
–
–
–
–
4165845
–
–
WID_Master16_Turning_Inserts_B134_B135_Metric_REBRAND.indd 134 10/30/15 2:51 PM
B135
LViWID M 16 T i I B134 B135 M i REBRANDO b 15 20159 39AM
WIDIA™ VariTurn™
rst choice
alternate choice
Inserts
P
M
K
N
S
H
SNMG-2P
ISO
catalogue number D L10 S R¡D1
TN10P
TN20P
TN30P
TN15M
TN30M
TN20K
TN10U
TN15U
SNMG0903082P 9,53 9,53 3,18 0,8 3,81
4166853
4166854
–
–
–
4166855
4166856
–
SNMG1204082P 12,70 12,70 4,76 0,8 5,16
4166857
4166858
–
4166860
–
4166859
4166861
4166862
Inserts
SNMG-4P
ISO
catalogue number D L10 S R¡D1
TN10P
TN20P
TN30P
TN15M
TN30M
TN20K
TN10U
TN15U
SNMG1204084P 12,70 12,70 4,76 0,8 5,16
–
–
–
4165870
4165871
–
–
–
SNMG1204124P 12,70 12,70 4,76 1,2 5,16
–
–
–
4165872
4165873
–
–
–
C2–C49 C50–C81 C86–C129 B8–B25 B26–B28 B30–B105
WID_Master16_Turning_Inserts_B134_B135_Metric_REBRAND.indd 135 10/30/15 2:51 PM
B136
LViWID M 16 T i I B136 B137 M i REBRAND O b 15 2015 9 39 AM
widia.com
SNMG-6P
ISO
catalogue number D L10 S R¡D1
TN10P
TN20P
TN30P
TN15M
TN30M
TN20K
TN10U
TN15U
SNMG0903086P 9,53 9,53 3,18 0,8 3,81
4166802
4166803
–
–
–
–
–
–
SNMG1204046P 12,70 12,70 4,76 0,4 5,16
4166804
4166805
–
4166806
4166807
–
–
–
SNMG1204086P 12,70 12,70 4,76 0,8 5,16
4166808
4166809
4166810
4166811
4166812
–
–
–
SNMG1204126P 12,70 12,70 4,76 1,2 5,16
4166813
4166814
4166815
4166816
4166817
–
–
–
SNMG1906166P 19,05 19,05 6,35 1,6 7,92
–
–
5308173
–
–
–
–
–
SNMG1906126P 19,05 19,05 6,35 1,2 7,93
–
4166818
4166819
4166820
4166821
–
–
–
rst choice
alternate choice
P
M
K
N
S
H
Inserts
WIDIA™ VariTurn™
Inserts
WID_Master16_Turning_Inserts_B136_B137_Metric_REBRAND.indd 136 10/30/15 2:51 PM
B137
LViWID M 16 T i I B136 B137 M i REBRANDO b 15 20159 39AM
WIDIA™ VariTurn™
SNMG-7N
ISO
catalogue number D L10 S R¡D1
TN10P
TN20P
TN30P
TN15M
TN30M
TN20K
TN10U
TN15U
SNMG1204087N 12,70 12,70 4,76 0,8 5,16
4166498
4166499
–
–
–
4166500
–
–
SNMG1204127N 12,70 12,70 4,76 1,2 5,16
4166501
4166502
4166503
–
–
4166504
–
–
SNMG1204167N 12,70 12,70 4,76 1,6 5,16
4166505
4166506
4166507
–
–
4166508
–
–
SNMG1506127N 15,88 15,88 6,35 1,2 6,35
–
4166509
4166510
–
–
4166511
–
–
SNMG1506167N 15,88 15,88 6,35 1,6 6,35
–
4166512
4166513
–
–
4166514
–
–
SNMG1906127N 19,05 19,05 6,35 1,2 7,93
–
4166515
4166516
–
–
4166517
–
–
SNMG1906167N 19,05 19,05 6,35 1,6 7,93
–
4166518
4166519
–
–
4166520
–
–
rst choice
alternate choice
Inserts
P
M
K
N
S
H
Inserts
C2–C49 C50–C81 C86–C129 B8–B25 B26–B28 B30–B105
WID_Master16_Turning_Inserts_B136_B137_Metric_REBRAND.indd 137 10/30/15 2:51 PM
B138
LViWID M 16 T i I B138 B139 M i REBRAND O b 15 2015 9 40 AM
widia.com
WIDIA™ VariTurn™
TCGT-1P
ISO
catalogue number D L10 S R¡D1
TN10P
TN20P
TN30P
TN15M
TN30M
TN20K
TN10U
TN15U
TCGT1102011P 6,35 11,00 2,38 0,1 2,80
–
–
–
–
–
–
4164526
4164527
TCGT1102041P 6,35 11,00 2,38 0,4 2,80
–
–
–
–
–
–
4164528
4164529
TCGT16T3021P 9,53 16,50 3,97 0,2 4,40
–
–
–
–
–
–
4164530
–
TCGT16T3041P 9,53 16,50 3,97 0,4 4,40
–
–
–
–
–
–
4164531
4164532
TCGT16T3081P 9,53 16,50 3,97 0,8 4,40
–
–
–
–
–
–
4164543
–
rst choice
alternate choice
Inserts
P
M
K
N
S
H
Inserts
WID_Master16_Turning_Inserts_B138_B139_Metric_REBRAND.indd 138 10/30/15 2:51 PM
B139
LViWID M 16 T i I B138 B139 M i REBRANDO b 15 20159 40AM
WIDIA™ VariTurn™
TCMT-1P
ISO
catalogue number D L10 S R¡D1
TN10P
TN20P
TN30P
TN15M
TN30M
TN20K
TN10U
TN15U
TCMT1102041P 6,35 11,00 2,38 0,4 2,80
4166414
4166415
–
4166417
4166418
4166416
4166419
–
TCMT1102081P 6,35 11,00 2,38 0,8 2,80
4166420
4166421
–
–
–
4166422
4166423
–
TCMT1102021P 6,35 11,00 2,38 0,2 2,90
4166411
–
–
–
–
4166412
4166413
–
TCMT16T3021P 9,53 16,50 3,97 0,2 4,40
–
–
–
–
–
–
4166424
–
TCMT16T3041P 9,53 16,50 3,97 0,4 4,40
4166425
4166426
–
4166428
4166429
4166427
4166430
–
TCMT16T3081P 9,53 16,50 3,97 0,8 4,40
4166469
4166471
–
4166563
4166564
4166472
4166565
–
TCMT16T3121P 9,53 16,50 3,97 1,2 4,40
–
–
–
–
–
–
4166566
–
TCMT2204081P 12,70 22,00 4,76 0,8 5,50
4166567
4166568
–
4166570
4166571
4166569
4166572
–
rst choice
alternate choice
Inserts
P
M
K
N
S
H
Inserts
C2–C49 C50–C81 C86–C129 B8–B25 B26–B28 B30–B105
WID_Master16_Turning_Inserts_B138_B139_Metric_REBRAND.indd 139 10/30/15 2:51 PM
B140
LViWID M 16 T i I B140 B141 M i REBRAND O b 15 2015 9 40 AM
widia.com
WIDIA™ VariTurn™
TNGP
ISO
catalogue number D L10 S R¡D1
TN10P
TN20P
TN30P
TN15M
TN30M
TN20K
TN10U
TN15U
TNGP160402 9,53 16,50 4,76 0,2 3,81
–
–
–
–
–
–
4164789
4164790
TNGP160404 9,53 16,50 4,76 0,4 3,81
–
–
–
–
–
–
4164791
4164792
TNGP160408 9,53 16,50 4,76 0,8 3,81
–
–
–
–
–
–
4164793
–
rst choice
alternate choice
Inserts
P
M
K
N
S
H
Inserts
TNMA
ISO
catalogue number D L10 S R¡D1
TN10P
TN20P
TN30P
TN15M
TN30M
TN20K
TN10U
TN15U
TNMA160408 9,53 16,50 4,76 0,8 3,81
–
–
–
–
–
4165846
–
–
TNMA160412 9,53 16,50 4,76 1,2 3,81
–
–
–
–
–
4165847
–
–
TNMA220408 12,70 22,00 4,76 0,8 5,16
–
–
–
–
–
4165848
–
–
WID_Master16_Turning_Inserts_B140_B141_Metric_REBRAND.indd 140 10/30/15 2:51 PM
B141
LViWID M 16 T i I B140 B141 M i REBRANDO b 15 20159 40AM
WIDIA™ VariTurn™
TNMG-2P
ISO
catalogue number D L10 S R¡D1
TN10P
TN20P
TN30P
TN15M
TN30M
TN20K
TN10U
TN15U
TNMG1604042P 9,53 16,50 4,76 0,4 3,81
4166863
4166864
–
4166866
4166867
4166865
4166868
4166869
TNMG1604082P 9,53 16,50 4,76 0,8 3,81
4166870
4166871
–
4166873
–
4166872
4166874
4166875
TNMG1604122P 9,53 16,50 4,76 1,2 3,81
4166876
4166877
–
4166879
4166880
4166878
4166881
–
TNMG2204082P 12,70 22,00 4,76 0,8 5,16
4166882
4166883
–
4166885
–
4166884
4166886
4166887
rst choice
alternate choice
Inserts
Inserts
TNMG-4P
ISO
catalogue number D L10 S R¡D1
TN10P
TN20P
TN30P
TN15M
TN30M
TN20K
TN10U
TN15U
TNMG1604044P 9,53 16,50 4,76 0,4 3,81
–
5359246
–
4165874
4165875
–
–
–
TNMG1604084P 9,53 16,50 4,76 0,8 3,81
–
5359247
–
4165876
4165877
–
–
–
TNMG1604124P 9,53 16,50 4,76 1,2 3,81
–
–
–
4165878
4165879
–
–
–
TNMG2204044P 12,70 22,00 4,76 0,4 5,16
–
5359248
–
4165880
4165881
–
–
–
TNMG2204084P 12,70 22,00 4,76 0,8 5,16
–
5359249
–
4165882
4165883
–
–
–
TNMG2204124P 12,70 22,00 4,76 1,2 5,16
–
5359250
–
–
–
–
–
–
P
M
K
N
S
H
C2–C49 C50–C81 C86–C129 B8–B25 B26–B28 B30–B105
WID_Master16_Turning_Inserts_B140_B141_Metric_REBRAND.indd 141 10/30/15 2:51 PM
B142
LViWID M 16 T i I B142 B143 M i REBRAND O b 15 2015 9 40 AM
widia.com
WIDIA™ VariTurn™
TNMG-6P
ISO
catalogue number D L10 S R¡D1
TN10P
TN20P
TN30P
TN15M
TN30M
TN20K
TN10U
TN15U
TNMG1604046P 9,53 16,50 4,76 0,4 3,81
4166822
4166823
–
4166824
4167086
–
–
–
TNMG1604086P 9,53 16,50 4,76 0,8 3,81
4167087
4167088
4167089
4167090
4167091
–
–
–
TNMG1604126P 9,53 16,50 4,76 1,2 3,81
4167092
4167113
–
4167114
4167115
–
–
–
TNMG2204046P 12,70 22,00 4,76 0,4 5,16
4167116
4167117
–
4167118
4167119
–
–
–
TNMG2204086P 12,70 22,00 4,76 0,8 5,16
4167120
4167121
4167122
4167123
4167124
–
–
–
rst choice
alternate choice
Inserts
P
M
K
N
S
H
Inserts
WID_Master16_Turning_Inserts_B142_B143_Metric_REBRAND.indd 142 10/30/15 2:51 PM
B143
LViWID M 16 T i I B142 B143 M i REBRANDO b 15 20159 40AM
WIDIA™ VariTurn™
TNMG-7N
ISO
catalogue number D L10 S R¡D1
TN10P
TN20P
TN30P
TN15M
TN30M
TN20K
TN10U
TN15U
TNMG1604047N 9,53 16,50 4,76 0,4 3,81
–
4166521
–
–
–
–
–
–
TNMG1604087N 9,53 16,50 4,76 0,8 3,81
4166522
4166523
4166524
–
–
4166525
–
–
TNMG1604127N 9,53 16,50 4,76 1,2 3,81
4166526
4166527
4166528
–
–
4166529
–
–
TNMG2204047N 12,70 22,00 4,76 0,4 5,16
4166530
4166531
–
–
–
–
–
–
TNMG2204087N 12,70 22,00 4,76 0,8 5,16
4166532
4166533
4166534
–
–
4166535
–
–
TNMG2204127N 12,70 22,00 4,76 1,2 5,16
–
4166536
4166537
–
–
4166538
–
–
TNMG2706127N 15,88 27,50 6,35 1,2 6,35
4166539
4166540
4166541
–
–
4166542
–
–
TNMG3309247N 19,05 33,00 9,53 2,4 7,93
4166543
4166544
4166545
–
–
4166546
–
–
rst choice
alternate choice
Inserts
P
M
K
N
S
H
Inserts
C2–C49 C50–C81 C86–C129 B8–B25 B26–B28 B30–B105
WID_Master16_Turning_Inserts_B142_B143_Metric_REBRAND.indd 143 10/30/15 2:51 PM
B144
LViWID M 16 T i I B144 B145 M i REBRAND N b 11 2015 10 51 AM
widia.com
WIDIA™ VariTurn™
VBGT-1P
ISO
catalogue number D L10 S R¡D1
TN10P
TN20P
TN30P
TN15M
TN30M
TN20K
TN10U
TN15U
VBGT1103011P 6,35 11,07 3,18 0,1 2,80
–
–
–
–
–
–
4164546
4164547
VBGT1103021P 6,35 11,07 3,18 0,2 2,80
–
–
–
–
–
–
4164544
4164545
VBGT1103041P 6,35 11,07 3,18 0,4 2,80
–
–
–
–
–
–
4164548
–
VBGT1604011P 9,53 16,61 4,76 0,1 4,40
–
–
–
–
–
–
4164551
–
VBGT1604021P 9,53 16,61 4,76 0,2 4,40
–
–
–
–
–
–
4164549
4164550
VBGT1604041P 9,53 16,61 4,76 0,4 4,40
–
–
–
–
–
–
4164552
4164563
rst choice
alternate choice
Inserts
P
M
K
N
S
H
Inserts
VBMT-1P
ISO
catalogue number D L10 S R¡D1
TN10P
TN20P
TN30P
TN15M
TN30M
TN20K
TN10U
TN15U
VBMT1103021P 6,35 11,07 3,18 0,2 2,80
–
–
–
–
–
–
4166573
4166574
VBMT1103041P 6,35 11,07 3,18 0,4 2,80
4166575
4166576
–
4166578
4166579
4166577
4166580
4166581
VBMT1103081P 6,35 11,07 3,18 0,8 2,80
4166582
4166583
–
4166585
–
4166584
4166586
–
VBMT1604021P 9,53 16,61 4,76 0,2 4,40
4166587
–
–
–
4166589
4166588
4166590
4166591
VBMT1604041P 9,53 16,61 4,76 0,4 4,40
4166592
4166593
–
4166595
4166596
4166594
4166597
4166598
VBMT1604081P 9,53 16,61 4,76 0,8 4,40
4166599
4166600
–
4166602
4166603
4166601
4166604
4166605
WID_Master16_Turning_Inserts_B144_B145_Metric_REBRAND.indd 144 11/11/15 5:38 PM
B145
LViWID M 16 T i I B144 B145 M i REBRANDN b 11 201510 51AM
VNGP
ISO
catalogue number D L10 S R¡D1
TN10P
TN20P
TN30P
TN15M
TN30M
TN20K
TN10U
TN15U
VNGP160401 9,53 16,61 4,76 0,1 3,81
–
–
–
–
–
–
4164795
4164796
VNGP160402 9,53 16,61 4,76 0,2 3,81
–
–
–
–
–
–
4164794
–
VNGP220404 12,70 22,14 4,76 0,4 5,16
–
–
–
–
–
–
4164797
4164798
VNGP220408 12,70 22,14 4,76 0,8 5,16
–
–
–
–
–
–
4164799
4164800
rst choice
alternate choice
P
M
K
N
S
H
Inserts
WIDIA™ VariTurn™
Inserts
VNMA
ISO
catalogue number D L10 S R¡D1
TN10P
TN20P
TN30P
TN15M
TN30M
TN20K
TN10U
TN15U
VNMA160408 9,53 16,61 4,76 0,8 3,81
–
–
–
–
–
4165849
–
–
C2–C49 C50–C81 C86–C129 B8–B25 B26–B28 B30–B105
WID_Master16_Turning_Inserts_B144_B145_Metric_REBRAND.indd 145 11/11/15 5:38 PM
B146
LViWID M 16 T i I B146 B147 M i REBRAND O b 15 2015 9 41 AM
widia.com
WIDIA™ VariTurn™
VNMG-2P
ISO
catalogue number D L10 S R¡D1
TN10P
TN20P
TN30P
TN15M
TN30M
TN20K
TN10U
TN15U
VNMG1604042P 9,53 16,61 4,76 0,4 3,81
4166281
4166282
–
4166284
4166285
4166283
4166286
4166287
VNMG1604082P 9,53 16,61 4,76 0,8 3,81
4166288
4166289
–
4166291
–
4166290
4166292
4166293
rst choice
alternate choice
Inserts
P
M
K
N
S
H
Inserts
VNMG-4P
ISO
catalogue number D L10 S R¡D1
TN10P
TN20P
TN30P
TN15M
TN30M
TN20K
TN10U
TN15U
VNMG1604044P 9,53 16,61 4,76 0,4 3,81
–
5359251
–
4165884
4165885
–
5359252
–
VNMG1604084P 9,53 16,61 4,76 0,8 3,81
–
5359253
–
4165886
4165887
–
5359254
–
WID_Master16_Turning_Inserts_B146_B147_Metric_REBRAND.indd 146 10/30/15 2:52 PM
B147
LViWID M 16 T i I B146 B147 M i REBRANDO b 15 20159 41AM
WIDIA™ VariTurn™
VNMG-6P
ISO
catalogue number D L10 S R¡D1
TN10P
TN20P
TN30P
TN15M
TN30M
TN20K
TN10U
TN15U
VNMG1604086P 9,53 16,61 4,76 0,8 3,81
4167125
4167126
–
4167127
4167128
–
–
–
rst choice
alternate choice
Inserts
P
M
K
N
S
H
Inserts
WNMA
ISO
catalogue number D L10 S R¡D1
TN10P
TN20P
TN30P
TN15M
TN30M
TN20K
TN10U
TN15U
WNMA060408 9,53 6,52 4,76 0,8 3,81
–
–
–
–
–
4165850
–
–
WNMA080408 12,70 8,69 4,76 0,8 5,16
–
–
–
–
–
4165851
–
–
WNMA080412 12,70 8,69 4,76 1,2 5,16
–
–
–
–
–
4165852
–
–
C2–C49 C50–C81 C86–C129 B8–B25 B26–B28 B30–B105
WID_Master16_Turning_Inserts_B146_B147_Metric_REBRAND.indd 147 10/30/15 2:52 PM
B148
LViWID M 16 T i I B148 B149 M i REBRAND O b 15 2015 9 41 AM
widia.com
WIDIA™ VariTurn™
WNMG-2P
ISO
catalogue number D L10 S R¡D1
TN10P
TN20P
TN30P
TN15M
TN30M
TN20K
TN10U
TN15U
WNMG0804042P 12,70 8,69 4,76 0,4 5,16
4166294
4166295
–
4166297
4166298
4166296
4166299
4166300
WNMG0804082P 12,70 8,69 4,76 0,8 5,16
4166301
4166302
–
4166304
–
4166303
4166305
4166306
rst choice
alternate choice
Inserts
P
M
K
N
S
H
Inserts
WNMG-4P
ISO
catalogue number D L10 S R¡D1
TN10P
TN20P
TN30P
TN15M
TN30M
TN20K
TN10U
TN15U
WNMG0804044P 12,70 8,69 4,76 0,4 5,16
–
–
–
4165888
4165889
–
–
–
WNMG0804084P 12,70 8,69 4,76 0,8 5,16
–
5359255
–
4165890
4165891
–
5359256
–
WNMG0804124P 12,70 8,69 4,76 1,2 5,16
–
–
–
–
4165892
–
–
–
WID_Master16_Turning_Inserts_B148_B149_Metric_REBRAND.indd 148 10/30/15 2:52 PM
B149
LViWID M 16 T i I B148 B149 M i REBRANDO b 15 20159 41AM
WIDIA™ VariTurn™
WNMG-6P
ISO
catalogue number D L10 S R¡D1
TN10P
TN20P
TN30P
TN15M
TN30M
TN20K
TN10U
TN15U
WNMG0604086P 9,53 6,52 4,76 0,8 3,81
4167129
4167130
–
4167131
4167132
–
–
–
WNMG0804086P 12,70 8,69 4,76 0,8 5,16
4167133
4167134
4167135
4167136
4167137
–
–
–
WNMG0804126P 12,70 8,69 4,76 1,2 5,16
4167138
4167139
4167140
4167141
4167142
–
–
–
rst choice
alternate choice
Inserts
P
M
K
N
S
H
Inserts
WNMG-7N
ISO
catalogue number D L10 S R¡D1
TN10P
TN20P
TN30P
TN15M
TN30M
TN20K
TN10U
TN15U
WNMG0804087N 12,70 8,69 4,76 0,8 5,16
4166547
4166548
4166549
–
–
4166550
–
–
WNMG0804127N 12,70 8,69 4,76 1,2 5,16
4166551
4166552
4166553
–
–
4166554
–
–
WNMG0804167N 12,70 8,69 4,76 1,6 5,16
–
4166555
4166556
–
–
4166557
–
–
C2–C49 C50–C81 C86–C129 B8–B25 B26–B28 B30–B105
WID_Master16_Turning_Inserts_B148_B149_Metric_REBRAND.indd 149 10/30/15 2:52 PM
B150
LViWID M 16 T i I B150 B151 M i REBRAND O b 27 2015 4 52 PM
widia.com
• Easy to choose platform — one geometry and two grades.
• Longer tool life.
High positive rake for
smooth chip fl ow.
High polish inserts to prevent built-up edge
and for longer tool life.
G tolerance inserts for
better precision.
Inserts for Aluminium
WIDIA offers a series of inserts specifi cally designed for machining
aluminium materials. These inserts are available in both an uncoated
and a PVD grade for better performance and better tool life.
WIDIA™ Inserts for Machining Aluminium
WID_Master16_Turning_Inserts_B150_B151_Metric_REBRAND.indd 150 10/30/15 2:52 PM
B151
LViWID M 16 T i I B150 B151 M i REBRANDO b 27 20154 52PM
widia.com
WIDIA™ Inserts • Machining Aluminium
Chipbreaker Geometries
Negative Inserts
AL1
For turning cast aluminium, light alloys, non-ferrous metals, high-melting metals, plastics,
glass bre, reinforced plastics, laminated board, carbon, and ne ceramics.
ap
depth of cut (mm)
N
feed rate (mm)
fn
AL3
For cost-effective machining of aluminium, non-ferrous metals, and plastics. Extremely
sharp cutting edges result in optimum part nishes with low cutting forces and short chips.
Finishing of steel, stainless steel, and grey iron is possible with the coated grade HCK10
™
.
ap
depth of cut (mm)
N
feed rate (mm)
fn
WID_Master16_Turning_Inserts_B150_B151_Metric_REBRAND.indd 151 10/30/15 2:52 PM
B152
LViWID M 16 T i I B152 B153 M i REBRAND O b 15 2015 9 42 AM
widia.com
WIDIA™ • Inserts for Machining Aluminium
Non-Ferrous Materials • Aluminium Alloys
Step 1 • Select the insert geometry
Step 2 • Select the grade
cutting condition
Positive Insert Geometry
-AL1 -AL3
heavily interrupted cut HCK10/HWK10 HCK10/HWK15
lightly interrupted cut HCK10/HWK10 HCK10/HWK15
varying depth of cut,
casting, or forging skin HCK10/HWK10 HCK10/HWK15
smooth cut, pre-turned surface HCK10/HWK10 HCK10/HWK15
Positive Inserts
feed rate (mm/rev)
depth of cut (in)
depth of cut (mm)
AL1
AL3
feed rate (in/rev)
Step 3 • Selecting the cutting speed
High-Silicon Aluminium Alloys
(hypereutectic >12,2% Si) and Magnesium Alloys speed — m/min Starting Conditions
Material
Group grade 250 500 750 1000 1250 1500 1750 2000 2250 2500 m/min
N3 HCK10 550
Low-Silicon Aluminium Alloys
(hypoeutectic <12,2% Si) and Magnesium Alloys speed — m/min Starting Conditions
Material
Group grade 250 500 750 1000 1250 1500 1750 2000 2250 2500 m/min
N2 HCK10 550
WID_Master16_Turning_Inserts_B152_B153_Metric_REBRAND.indd 152 10/30/15 2:52 PM
B153
LViWID M 16 T i I B152 B153 M i REBRANDO b 15 20159 42AM
widia.com
WIDIA™ • Inserts for Machining Aluminium
Non-Ferrous Materials • Miscellaneous Workpiece Materials
Additional cutting speed recommendations for miscellaneous workpiece materials
Tin Alloys, Cast: ASTM 823, Alloys 1, 2, 3, 11 speed — m/min Starting Conditions
Material
Group grade 250 500 750 1000 m/min
N8 HCK10 215
HWK10/HWK15 180
MMCs (Aluminium-Based Metal Matrix Composites) speed — m/min Starting Conditions
Material
Group grade 250 500 750 1000 m/min
N7 HCK10 170
Carbon and Graphite Composites:
Brush Alloys, Kevlar, and Graphite (280–400 HB) (30–43 HRC) speed — m/min Starting Conditions
Material
Group grade 250 500 750 1000 m/min
N6 HCK10 200
Nylon, Plastics, Rubbers, Phenolics, Resins, Fibreglass, and Glass speed — m/min Starting Conditions
Material
Group grade 250 500 750 1000 m/min
N5 HCK10 275
Copper-, Brass-, Zinc-Based on a Machinability
Index Range of 70–100 speed — m/min Starting Conditions
Material
Group grade 250 500 750 1000 m/min
N4 HCK10 275
HWK10/HWK15 260
WID_Master16_Turning_Inserts_B152_B153_Metric_REBRAND.indd 153 10/30/15 2:52 PM
B154
LViWID M 16 T i I B154 B155 M i REBRAND O b 15 2015 9 42 AM
widia.com
WIDIA™ Inserts • Machining Aluminium
Grades and Grade Descriptions
Coatings provide high-speed
capability and are engineered
for fi nishing to heavy roughing.
Grade
PSteel
MStainless Steel
KCast Iron
NNon-Ferrous
SHigh-Temp Alloys
HHardened Materials
HCK10
Coated carbide. PVD — TIALN-Al2O3 on micro-grain carbide. Light and medium
machining. For aluminium alloys. N
HC-N10
HWK10
Uncoated carbide. Micro-grain carbide with high cutting edge stability.
Light machining. For non-ferrous metals and non-metals. N
HF-N10
HWK15
Uncoated carbide. Micro-grain carbide with high cutting edge stability.
Light and medium machining. For non-ferrous metals and non-metals. N
HF-N15
wear
resistance toughness
Coating Grade Description 05 10 15 20 25 30 35 40 45
WID_Master16_Turning_Inserts_B154_B155_Metric_REBRAND.indd 154 10/30/15 2:52 PM
B155
LViWID M 16 T i I B154 B155 M i REBRANDO b 15 20159 42AM
WIDIA™ Inserts • Machining Aluminium
CCGT-AL3
ISO
catalogue number D L10 S R¡D1
HCK10
HWK10
HWK15
CCGT060202AL3 6,35 6,45 2,38 0,2 2,80
2022257
–
2022258
CCGT060204AL3 6,35 6,45 2,38 0,4 2,80
2022259
–
2022260
CCGT09T302AL3 9,53 9,67 3,97 0,2 4,40
–
–
2022854
CCGT09T304AL3 9,53 9,67 3,97 0,4 4,40
2022261
–
2022262
CCGT09T308AL3 9,53 9,67 3,97 0,8 4,40
–
–
2022858
CCGT120402AL3 12,70 12,90 4,76 0,2 5,50
–
–
2022859
CCGT120404AL3 12,70 12,90 4,76 0,4 5,50
2022323
–
2022324
CCGT120408AL3 12,70 12,90 4,76 0,8 5,50
2022325
–
2022326
P
M
K
N
S
H
rst choice
alternate choice
ISO Carbide Inserts
Inserts
C2–C49 C50–C81 C86–C129 B8–B25 B26–B28 B30–B105
WID_Master16_Turning_Inserts_B154_B155_Metric_REBRAND.indd 155 10/30/15 2:52 PM
B156
LViWID M 16 T i I B156 B157 M i REBRAND O b 15 2015 9 42 AM
widia.com
DCGT-AL3
ISO
catalogue number D L10 S R¡D1
HCK10
HWK10
HWK15
DCGT070202AL3 6,35 7,75 2,38 0,2 2,80
2022327
–
2022328
DCGT070204AL3 6,35 7,75 2,38 0,4 2,80
2022329
–
2022330
DCGT11T302AL3 9,53 11,63 3,97 0,2 4,40
–
–
2022861
DCGT11T304AL3 9,53 11,63 3,97 0,4 4,40
2014890
–
2022331
DCGT11T308AL3 9,53 11,63 3,97 0,8 4,40
2022332
–
2022483
rst choice
alternate choice
Inserts
WIDIA™ Inserts • Machining Aluminium
ISO Carbide Inserts
RCGT-AL1
ISO
catalogue number D S D1
HCK10
HWK10
HWK15
RCGT0803M0AL1 8,00 3,18 3,40
2002473
2002474
–
SCGT-AL3
ISO
catalogue number D L10 S R¡D1
HCK10
HWK10
HWK15
SCGT120408AL3 12,70 12,70 4,76 0,8 5,50
–
–
2023638
P
M
K
N
S
H
WID_Master16_Turning_Inserts_B156_B157_Metric_REBRAND.indd 156 10/30/15 2:52 PM
B157
LViWID M 16 T i I B156 B157 M i REBRANDO b 15 20159 42AM
WIDIA™ Inserts • Machining Aluminium
TCGT-AL1
ISO
catalogue number D L10 S R¡D1
HCK10
HWK10
HWK15
TCGT110204AL1 6,35 11,00 2,38 0,4 2,80
–
2006991
–
TCGT16T308AL1 9,53 16,50 3,97 0,8 4,40
–
2007004
–
rst choice
alternate choice
ISO Carbide Inserts
VCGT-AL3
ISO
catalogue number D L10 S R¡D1
HCK10
HWK10
HWK15
VCGT110302AL3 6,35 11,07 3,18 0,2 2,80
–
–
2024559
VCGT110304AL3 6,35 11,07 3,18 0,4 2,80
–
–
2024561
VCGT160404AL3 9,53 16,61 4,76 0,4 4,40
2022484
–
2022485
VCGT160408AL3 9,53 16,61 4,76 0,8 4,40
2022487
–
2022488
VCGT160412AL3 9,53 16,61 4,76 1,2 4,40
2002503
–
2022489
VCGT220530AL3 12,70 22,14 5,56 3,0 5,50
2002505
–
2002506
Inserts
P
M
K
N
S
H
C2–C49 C50–C81 C86–C129 B8–B25 B26–B28 B30–B105
WID_Master16_Turning_Inserts_B156_B157_Metric_REBRAND.indd 157 10/30/15 2:52 PM
B158
LViWID M 16 T i I B158 B159 M i REBRAND N b 11 2015 10 58 AM
widia.com
Hard part turning, along with the machining of cast irons, high-temp
alloys, and non-ferrous materials, can be accomplished through the use
of inserts made from advanced materials. These advanced materials
include ceramics, PcBN (polycrystalline cubic boron nitride), and PCD
(polycrystalline diamond). WIDIA™ offers:
• Improved performance.
• Greater wear resistance.
• Longer tool life.
Ceramic Inserts
• Silicon-nitride based ceramic for cast iron machining.
• Mixed ceramic for hard machining and fi nishing of cast iron.
• Whisker ceramic for high-temp alloy and
hard machining.
CW2015 —
Mixed Ceramic
KH
CW5025 —
Silicon-Nitride
Ceramic
K
Advanced Material Inserts
Ceramic, PcBN, and PCD Inserts
WID_Master16_Turning_Inserts_B158_B159_Metric_REBRAND.indd 158 11/11/15 5:38 PM
B159
LViWID M 16 T i I B158 B159 M i REBRANDN b 11 201510 58AM
widia.com
PcBN
• Inserts are made only from PcBN.
• No material joint.
• Best heat-absorption capacity.
• Can work at highest temperatures.
Tipped Inserts
PCD
Solid Inserts
• Require a carrier and a PcBN tip.
• The tips are brazed to a carrier.
• The substrate has to have a pocket that will
accommodate and support the tip.
• Targeted machining of non-ferrous materials.
• Signifi cant advantage in hardness over carbide tools.
• Increased productivity through higher speeds and longer tool life.
• Best used in processing materials that are un-machinable
with conventional tooling.
WDN25U
N
WBH25P
H
WBH25P
H
WID_Master16_Turning_Inserts_B158_B159_Metric_REBRAND.indd 159 11/11/15 5:38 PM
B160
LViWID M 16 T i I B160 B161 M i REBRAND N b 11 2015 10 59 AM
widia.com
Cubic Boron Nitride and Polycrystalline Diamond Inserts
CCGW-C
ISO
catalogue number D L10 S R D1
WBH10P
WBH25P
WBH30P
WBK40U
WDN00U
WDN25U
CCGW060202EC 6,35 6,45 2,38 0,2 2,80
–
3883561
–
–
–
–
CCGW060202S01015C 6,35 6,45 2,38 0,2 2,80
3883505
–
–
–
–
–
CCGW060204S01015C 635 645 238 04 280
3
506
3
573
–
–
–
–
P
M
K
N
S
H
rst choice
alternate choice
ISO Inserts
(C)
Advanced Material Inserts
Catalogue Numbering System
How Do Catalogue Numbers Work?
Each character in our catalogue number signi es a speci c trait of
that product. Use the following key columns and corresponding
images to easily identify which attributes apply.
CCGW21505EC
CC GW2
Insert Shape Insert Clearance
Angle
Tolerance
Class
Insert
Features
Size
H
Hexagon
120°
A
Tolerances apply prior
to edge prep and coating
N
R
F
A
M
G
W
T
Q
U
B
H
C
J
RεRε
O
Octagon
135°
B
P
Pentagon
108°
C
R
Round
—
D
Rε
S
Square
90°
E
T
Triangular
60°
F
C
D
E
M
V
Rhomboid
80°
55°
75°
86°
35°
G
D = Theoretical diameter of
the insert inscribed circle
S = Thickness
B = See gures below
X
V
Special
Design
W
Trigon
80°
with enlarged
corner angles
N
L
Rectangular
90°
P
A
B
N/K
Parallelogram
85°
82°
55°
O
For other clearance
angles requiring
descriptions.
Code for metric
cutting edge
length “L10”
“D”
mm C D R S T V W
3,97 S4 04 03 03 06 — —
4,76 04 05 04 04 08 08 S3
5,56 05 06 05 05 09 09 03
6,00 — — 06 ————
6,35 06 07 06 06 11 11 04
7,94 08 09 07 07 13 13 05
8,00 — — 08 ————
9,52 09 11 09 09 16 16 06
10,00 — — 10 — — — —
11,11 11 13 11 11 19 19 07
12,00 — — 12 — — — —
12,70 12 15 12 12 22 22 08
14,29 14 17 14 14 24 24 09
15,88 16 19 15 15 27 27 10
16,00 — — 16 — — — —
17,46 17 21 17 17 30 30 11
19,05 19 23 19 19 33 33 13
20,00 — — 20 — — — —
22,22 22 27 22 22 38 38 15
25,00 — — 25 ————
25,40 25 31 25 25 44 44 17
31,75 32 38 31 31 54 54 21
32,00 — — 32 ————
tolerance
class*
tolerance
on “D”
tolerance
on “B”
tolerance
on “S”
C ±0,025 ±0,013 ±0,025
H ±0,013 ±0,013 ±0,025
E ±0,025 ±0,025 ±0,025
G ±0,025 ±0,025 ±0,013
M See tables on next page ±0,013
U See tables on next page ±0,013
*Tolerances apply prior to edge prep and coating.
WID_Master16_Turning_Inserts_B160_B161_Metric_REBRAND.indd 160 11/11/15 5:39 PM
B161
LViWID M 16 T i I B160 B161 M i REBRANDN b 11 201510 59AM
widia.com
Cubic Boron Nitride and Polycrystalline Diamond Inserts
CCGW-C
ISO
catalogue number D L10 S R D1
WBH10P
WBH25P
WBH30P
WBK40U
WDN00U
WDN25U
CCGW060202EC 6,35 6,45 2,38 0,2 2,80
–
3883561
–
–
–
–
CCGW060202S01015C 6,35 6,45 2,38 0,2 2,80
3883505
–
–
–
–
–
CCGW060204S01015C 6,35 6,45 2,38 0,4 2,80
8
83506
8
83573
–
–
–
–
P
M
K
N
S
H
rst choice
alternate choice
ISO Inserts
(C)
Advanced Material Inserts
Catalogue Numbering System
By referencing this easy-to-use guide, you can
identify the correct product to meet your needs.
15 05 E C
Thickness
“S”
Corner
Radius “R¡”
Hand of Insert
(optional)
Cutting Edge
(optional)
T-Land Width
(optional)
T-Land Angle
(optional)
Tip
Style
(optional)
Chipbreaker
(optional)
R = Right
hand F*
Sharp
L = Left
hand E
Rounded
N = Neutral T*
Chamfered
S*
Chamfered and Rounded
K
Double-Chamfered
P
Double-Chamfered and Rounded
symbol
corner
radius
mm mm
X0 .04
01 0,1
02 0,2
04 0,4
08 0,8
12 1,2
16 1,6
20 2,0
24 2,4
28 2,8
32 3,2
00 round
insert
M0
symbol
thick-
ness
mm mm
— 0,79
T0 1,00
01 11,59
T1 1,98
02 2,38
03 3,18
T3 3,97
04 4,76
05 5,56
06 6,35
07 7,94
09 9,52
11 11,11
12 12,70
symbol mm symbol size
ISO size
010 0,01 10 10°
020 0,02 15 15°
20 20°
25 25°
30 30°
FW = Finishing
Wiper
MW = Medium
Wiper
symbol usage
Cfull top
Mmini tip
MT multi-tip
ST single tip
± Tolerance on “D” ± Tolerance on “B”
Class M Tolerance Class U
Tolerance Class M Tolerance Class U
Tolerance
“D” Shapes S, T, C,
R, & W
Shape
D
Shape
V
Shapes
S, T, & C “D” Shapes
S, T, C, R, & W
Shape
D
Shape
V
Shapes
S, T, & C
mm mm mm mm mm mm mm mm mm mm
3,97 0,05 –– –
3,97 0,08 –– –
4,76 0,05 – – 0,08 4,76 0,08 – – 0,13
5,56 0,05 0,05 0,05 0,08 5,56 0,08 0,11 – 0,13
6,35 0,05 0,05 0,05 0,08 6,35 0,08 0,11 – 0,13
7,94 0,05 0,05 0,05 0,08 7,94 0,08 0,11 – 0,13
9,52 0,05 0,05 0,05 0,08 9,52 0,08 0,11 0,18 0,13
11,11 0,08 0,08 0,08 0,13 11,11 0,13 0,15 ––
12,70 0,08 0,08 0,08 0,13 12,70 0,13 0,15 0,25 0,20
14,29 0,08 0,08 0,08 0,13 14,29 0,13 0,15 ––
15,88 0,10 0,10 0,10 0,18 15,88 0,15 0,18 –0,27
17,46 0,10 0,10 0,10 0,18 17,46 0,15 0,18 – 0,27
19,05 0,10 0,10 0,10 0,18 19,05 0,15 0,18 – 0,27
22,22 0,13 – – 0,25 22,22 0,15 – –0,38
25,40 0,13 – – 0,25 25,40 0,18 – – 0,38
31,75 0,15 – – 0,25 31,75 0,20 – – 0,38
*Also available in wiper style.
R
L
N
CCGW21505EC
WID_Master16_Turning_Inserts_B160_B161_Metric_REBRAND.indd 161 11/11/15 5:39 PM
B162
LViWID M 16 T i I B162 B163 M i REBRAND O b 15 2015 9 44 AM
widia.com
Advanced Material Inserts
WBH25P™ Features and Benefi ts
1
2
3
WBH25P for Enhanced Performance — Five Unique Features
Newly developed substrate enables application
in a wide variety of demanding situations.
Nano-composite coating that enhances speed
capabilities and tool life.
Improved edge preparation technology for longer tool life, reliable performance,
better surface fi nish, and tighter workpiece tolerances.
The substrate contains superhard grains with a uniquely formulated
size distribution and nano-structured binder phase. This unique
combination provides an unparalleled balance of wear resistance
and toughness. The net result is a robust hard turning tooling
solution for a wide range of applications, including continuous
to interrupted cutting.
• Specially developed, advanced PVD coating with
nano-composite architecture for improved performance.
• Improved wear resistance by PVD coating chemistry
technology for machining hardened steels.
• Enhanced PVD coating adhesion on PcBN substrates.
A critical performance factor is the edge preparation itself. The grind
direction, surface roughness, hone sizes, and tolerances have great impact
on performance and process reliability. WIDIA
™
has performed signi cant
research work and optimised edge preparation to improve your overall
machining effectiveness.
Advanced PVD nano-composite
coatings PcBN
WID_Master16_Turning_Inserts_B162_B163_Metric_REBRAND.indd 162 10/30/15 2:53 PM
B163
LViWID M 16 T i I B162 B163 M i REBRANDO b 15 20159 44AM
widia.com
Advanced Material Inserts
WBH25P™ Features and Benefits
4
5
Large standard portfolio.
CB1 chipbreaker in positive and negative geometries,
solving chipbreaking and chip control issues.
Insert without Chipbreaker
• Long chips.
• Bird-nest formation.
Insert with Chipbreaker
• Chips are broken.
Standard edge preparation — the optimum combination of T-land
angle, T-land width, and hone size — is paramount in achieving
maximum performance. WIDIA
™
has developed three standard
edge congurations, including wiper inserts.
Chipbreaker — when machining case-hardened steel with a
hard outer skin and a tough and softer core, a chipbreaker
provides a great advantage. The CB1 chipbreaker is a proven
solution to effectively breaking chips. Long chips can form
bird nests, causing machine malfunctions, increasing scrap-
rates, and reducing the overall equipment effectiveness.
Available as a custom solution product.
These edge preps are available in common styles, sizes,
and nose radii in both positive and negative geometries.
• Light machining edge prep E.
• Medium machining edge prep S01015.
• Heavy machining edge prep S01025.
E: Honed cutting edge
S01015: W x ß = 0,10mm x 15°
S01025: W x ß = 0,10mm x 25°
` —T-Land Angle
W
α
β
WID_Master16_Turning_Inserts_B162_B163_Metric_REBRAND.indd 163 10/30/15 2:53 PM
B164
LViWID M 16 T i I B164 B165 M i REBRAND N b 11 2015 7 33 AM
widia.com
Advanced Material Inserts
Grade Numbering System
Grade Numbering System — Ceramics
CW 2 0 15
Brand Cutting
Material Group
Application Range
CW = WIDIA
™
2= CM Mixed (black)
ceramic
0= Stationary cutting edges
(turning, parting, threading)
3= CR Whisker reinforced
ceramic
1= First successor
5= CN Silicon nitride
ceramic
2= Semi-standard
rotating cutting edges
3= Semi-standard
general applications
5= Rotating cutting edges
(milling, drilling, reaming)
05
=
ne nishing
10
=
nishing
15
=
medium
to roughing
20
=
25
=
30
=
roughing
35
=
40
=
heaviest
roughing
45
=
50
=
}
}
}
WID_Master16_Turning_Inserts_B164_B165_Metric_REBRAND.indd 164 11/11/15 9:21 AM
B165
LViWID M 16 T i I B164 B165 M i REBRANDN b 11 20157 33AM
widia.com
Advanced Material Inserts
Grade Numbering System
Grade Numbering System — PcBN and PCD
WB H 30 P
Brand Cutting
Material Group
Material
Range
Application Range Coating
WIDIA
™
B= CBN U= Uncoated
D= PCD C= CVD Coated
P= PVD Coated
PSteel
MStainless Steel
KCast Iron
NNon-Ferrous
SHigh-Temp Alloys
HHardened Materials
UUniversal Machining
05
=
ne nishing
10
=
nishing
15
=
medium
to roughing
20
=
25
=
30
=
roughing
35
=
40
=
heaviest
roughing
45
=
50
=
}
}
}
WID_Master16_Turning_Inserts_B164_B165_Metric_REBRAND.indd 165 11/11/15 9:21 AM
B166
LViWID M 16 T i I B166 B167 M i REBRAND N b 13 2015 2 56 PM
widia.com
main group sub-group
(symbol) feature
hard metal
HW Uncoated WC-base hard metal
HT Uncoated TiC/TiN-base hard metal (cermets)
HC Coated hard metal
ceramics
CA Al2O3-base oxide ceramics
CM Composite ceramics Al2O3 + metal carbide
CN Si3N4-base nitride ceramics
CC Coated ceramics
cubic boron nitride BL Cubic boron nitride (CBN) with low CBN content
BH Cubic boron nitride (CBN) with high CBN content
diamond DP Polycrystalline diamond (PCD)
The cutting tool materials are classi ed by the combination
of their hardness and wear resistance characteristics.
The extended standard DIN ISO 513 also includes ceramic
cutting materials and the superhard polycrystalline materials,
boron nitride and diamond, resulting in additional identi cation
symbols for these cutting material groups.
Advanced Material Inserts
DP
BN
CA
CM
CN + CC
HT
HC
Polycrystalline Diamond
Cubic Boron Nitride
Ceramics
Cermets Coated Hard Metal
Uncoated Hard Metal
wear resistance
toughness
HW
Cutting Material Groups
WID_Master16_Turning_Inserts_B166_B167_Metric_REBRAND.indd 166 11/13/15 4:27 PM
B167
LViWID M 16 T i I B166 B167 M i REBRANDN b 13 20152 56PM
widia.com
Ceramic Inserts
Overview
Ceramic Inserts for Hard Turning, Turning in Cast Iron Materials, and Turning in High-Temp Alloys
Ceramic Turning Grades
• Ceramics offer greater wear resistance and toughness.
• Ceramics can be used in high-speed, continuous, and lightly interrupted turning
applications in cast iron materials.
• Ceramics can be used for high-speed applications in high-temp alloys.
Machining INCONEL®
Hard Machining
Cast Iron Machining
CW2015
CW3020 CW5025
Alumina-Based Ceramics
Mixed Ceramics
Silicon-Nitride Based Ceramics
Non-Oxide Ceramics
AI2O3 + ZrO2 +
TiC, TiCN
AI2O3 +
SiC-Whiskers
Si3N4 +
Y2O3
CW2015
™
CW3020
™
CW5025
™
• Aluminia and titanium carbo-nitride.
• High hardness and wear resistance.
• TiCN increases strength
and hardness.
• Black in colour.
• Aluminia + SiC whisker.
• High hardness and wear resistance.
• Whisker ceramic with elongated
crystals and very high strength.
• Grey-green colour.
• Pure silicon-nitride composition.
• Used in high-speed turning
applications.
• Designed for use in grey cast iron
and lower tensile ductile irons.
WID_Master16_Turning_Inserts_B166_B167_Metric_REBRAND.indd 167 11/13/15 4:27 PM
B168
Language Version: WID_Master16_Turning_Inserts_B168_B169_Metric_REBRAND December 18, 2015 10:41 AM
widia.com
PcBN Inserts
Overview
• PVD-coated grades available.
• Complete range of CBN grades for continuous to heavily interrupted turning.
• Industry-leading grades for grey cast iron machining.
• Full line of grades for hard turning.
• For best performance: solid, full-top, and tipped inserts are available.
PcBN Grades for Hard Turning, Powder Metal, and Grey Cast Iron Machining
Hard Turning Grades
Low-Content CBN
Grades for Fine Finishing
in Continuous Cutting
Medium-Content CBN
Grades for Continuous to
Interrupted Cutting
High-Content CBN
Grades for Heavily
Interrupted Cuts
WBH10P
™
• PVD-coated low-content grade.
• Coating provides thermal barrier to reduce crater wear.
• High temperature resistant ceramic binder improves
high-speed capability.
wear resistance
WBH25P
™
• PVD-coated medium-content grade.
• Coating provides thermal barrier to reduce crater wear.
• Withstands moderate interruptions.
WBH30P
™
• PVD-coated high-content grade.
• Superior abrasion-resistance.
• Withstands heaviest interruptions.
toughness
WBH10P
WBH25P
WBH30P
wear resistance
WBK40U
™
• Uncoated high-content grade, solid inserts only.
• Superior abrasion-resistance enables
high material removal rates.
• Withstands heaviest interruptions.
toughness
WBK40U
Grey Cast Iron Grades
B169
LViWID M 16 T i I B168 B169 M i REBRANDN b 11 201511 01AM
widia.com
WDN25U
™
wear resistance
• Multi-modal grade.
• Versatile grade for general
machining applications.
• Withstands moderate interruptions.
WDN00U
™
• Ultra- ne grain grade.
• Ideal for high-speed nishing operations.
• Fine grain structure provides a ner edge prep
and better surface nish.
toughness
PCD Grades for Turning Non-Ferrous Materials
Polycrystalline Diamond Inserts
Overview
• Two PCD grades — WDN25U and WDN00U — cover a wide range of applications.
• New grades provide outstanding performance to increase productivity
and cut manufacturing costs.
• High abrasion and chipping resistance.
• Used in machining aluminium alloys with low- and high-silicon content, copper alloys,
ceramics, and plastics.
• Suitable for machining highly abrasive materials such as titanium and
Metal Matrix Composites (MMC).
WDN25U
WDN00U
WID_Master16_Turning_Inserts_B168_B169_Metric_REBRAND.indd 169 11/11/15 5:39 PM
B170
LViWID M 16 T i I B170 B171 M i REBRAND O b 15 2015 9 45 AM
widia.com
Advanced Materials for Hard Turning
Overview
Advanced Materials for Hard Turning
Hard Turning Grade Selection
NOTE: For heavy machining, WBK40U
™
and CW3020
™
are the ideal choices.
Interrupted cutting?
No
No
No
No
No
CW2015
Hardness >62 HRC
Ra<0,8μm; Rz<4μm
Forged component?
Large batches?
Yes
Yes
Yes
Yes
Yes
Low PcBN [%] High Ceramics
Hardened
Steels
WBH10P
WBH25P
WBH30P
WBK40U
CW2015
CW3020
Finishing
Interrupted Heavy
Machining
WID_Master16_Turning_Inserts_B170_B171_Metric_REBRAND.indd 170 10/30/15 2:54 PM
B171
LViWID M 16 T i I B170 B171 M i REBRANDO b 15 20159 45AM
widia.com
Advanced Materials for Cast Iron Machining
Overview
Advanced Materials for Cast Iron Machining
Cast Iron Machining Grade Selection
Constant and high-quality casting?
Roughing Roughing
Roughing
Finishing Finishing
Finishing
WBK40U
WBK40U
CW5025
CW5025 CW5025
CW5025
WBH30P
Yes
Yes
High load?
No
No
WBK40U CW2015
CW2015
WBH30P
PcBN Ceramics
Cast Iron
Chip Cross-Section
WBH30P
CW2015
WBK40U
CW5025
Finishing
Heavy Machining
WID_Master16_Turning_Inserts_B170_B171_Metric_REBRAND.indd 171 10/30/15 2:54 PM
B172
LViWID M 16 T i I B172 B173 M i REBRAND N b 11 2015 7 34 AM
widia.com
Advanced Materials for High-Temperature and Non-Ferrous Machining
Overview
Advanced Materials for Non-Ferrous Machining
Advanced Materials for High-Temperature Machining
Titanium
PCD
Nickel-Based
Super Alloys
Non-Ferrous
WBH30P
CW3020
WDN00U
WDN00U
WDN25U
Finishing
Finishing
Heavy Machining
Heavy Machining
Chip Cross-Section Chip Cross-Section
WID_Master16_Turning_Inserts_B172_B173_Metric_REBRAND.indd 172 11/11/15 9:21 AM
B173
LViWID M 16 T i I B172 B173 M i REBRANDN b 11 20157 34AM
widia.com
Advanced Material Inserts
PSteel
MStainless Steel
KCast Iron
NNon-Ferrous
SHigh-Temp Alloys
HHardened Materials
Grades and Grade Descriptions
Reduce cycle times. High speed
and feed capability. Long tool life.
New multi-layer coating provides
better wear resistance.
Grade
wear
resistance toughness
Coating Grade Description 05 10 15 20 25 30 35 40 45
CW2015
Mixed (black) ceramic. Matrix Al2O3 and TiCN. Good toughness properties combined
with good wear resistance. Semi- nishing and nishing. For hardened iron base
materials and grey cast iron ( nishing).
K
CM-H10 H
CW5025
Silicon-nitride ceramic. Extraordinary toughness properties. Roughing, also in heavily
interrupted cuts. Capable of high-performance turning. To be used with or without
coolant. For grey cast iron.
K
CN-K15
CW3020
Whisker ceramic with a matrix of Al2O3 + SiCw. The SiC whiskers embedded in the
micro-structure give this ceramic excellent toughness for cutting high-temp alloys
and cast materials with high Brinell hardness.
S
C4 H
WBK40U
A high CBN content, solid CBN insert with multiple cutting edges. Applied in roughing
to nishing of fully pearlitic grey cast iron, chilled irons, high-chrome alloyed steels,
sintered powdered metals, and heavy cuts in hardened steels (>45 HRC). Use for
nishing chilled and fully pearlitic cast iron. Solid inserts offer better security and
shock-resistance than tipped inserts, while also enabling deeper depth-of-cut
capability.
K
BN-K40 H
WBH10P
A low content CBN grade with a PVD-TiAlN coating for added wear resistance.
Designed for precision machining of hardened steels (>45 HRC); the harder the steel
the better. PVD coating offers improved wear resistance and excellent surface nish
capability. Effectively applied on bearing steels, hot and cold work tool steels,
high-speed steels, die steels, case-hardened steels, carburised and nitrided irons,
and some hard coatings.
BN-H10 H
WID_Master16_Turning_Inserts_B172_B173_Metric_REBRAND.indd 173 11/11/15 9:21 AM
B174
LViWID M 16 T i I B174 B175 M i REBRAND N b 11 2015 11 04 AM
widia.com
Advanced Material Inserts
PSteel
MStainless Steel
KCast Iron
NNon-Ferrous
SHigh-Temp Alloys
HHardened Materials
Grades and Grade Descriptions
wear
resistance toughness
Coating Grade Description 05 10 15 20 25 30 35 40 45
Reduce cycle times. High speed
and feed capability. Long tool life.
New multi-layer coating provides
better wear resistance.
Grade
WBH25P
A PVD-TiAlN coating over a low content, CBN tip brazed onto a carbide insert.
Designed for roughing to nishing of hardened steels (>45 HRC). Use on bearing steel,
hot and cold work tool steels, high-speed steels, die steels, case-hardened steels,
carburised and nitrided irons, and some hard coatings.
BN-H25 H
WBH30P
A PVD-TiAlN coating over a low content, CBN tip brazed onto a carbide insert.
Designed for roughing to nishing in interrupted cuts on hardened steels (>45 HRC).
Applied on grey cast iron, chilled irons, high-chrome alloyed steels, high-temp alloys,
and sintered powdered metals.
K
S
BN-H30 H
WDN00U*
An ultra- ne grained polycrystalline diamond (PCD) tip brazed onto a carbide
substrate. Designed for general purpose turning of primarily non-ferrous materials.
Applied over a wide range of continuous to interrupted cuts where superior surface
nish is needed. Use on low- to medium-silicon content aluminium alloys,
non-metallics, copper, brass, and zinc-based alloys. The ultra- ne grained diamond
particle size enables superior surface nishes while ensuring the best mechanical
shock resistance of any PCD cutting tool.
N
S
DP-N10
*Grade available as Custom Solution only.
WDN25U
A multi-modal PCD grade with a range of grain sizes brazed onto a carbide substrate.
Engineered for extreme abrasion resistance and good edge strength for demanding
applications. An ideal choice for high-silicon aluminium alloys, bi-metallic (AL/GCI)
materials, MMC, carbon- bre reinforced plastics, and other abrasive
non-metallic materials.
N
DP-N25
WID_Master16_Turning_Inserts_B174_B175_Metric_REBRAND.indd 174 11/11/15 5:39 PM
B175
LViWID M 16 T i I B174 B175 M i REBRANDN b 11 201511 04AM
widia.com
Speed and Feed Chart
Ceramics • Metric
Inserts
Cutting Speed — vc
m/min
Material
Group
CW2015 CW3020 CW5025
min Start max min Start max min Start max
ap [mm] 0,5 4,0 0,5 4,0 1,0 8,0
f [mm/rev] 0,2 0,4 0,1 5,0 0,2 0,6
P
0–––––––––
1–––––––––
2–––––––––
3–––––––––
4–––––––––
5–––––––––
6–––––––––
M
1–––––––––
2–––––––––
3–––––––––
K
1250 475 725 – –– 250 760 1000
2300 550 800 – –– 275 365 490
3250 400 600 – –– 275 335 440
N
1–––––––––
2–––––––––
3–––––––––
4–––––––––
5–––––––––
6–––––––––
7–––––––––
8–––––––––
S
1––– 170 200 375 – ––
2––– 170 200 375 – ––
3––– 190 250 375 – ––
4–––––––––
H
160 100 140 45 85 125 – ––
260 100 140 45 85 125 – ––
360 100 140 45 85 125 – ––
460 100 140 45 85 125 – ––
WID_Master16_Turning_Inserts_B174_B175_Metric_REBRAND.indd 175 11/11/15 5:39 PM
B176
LViWID M 16 T i I B176 B177 M i REBRAND O b 15 2015 9 46 AM
widia.com
Speed and Feed Chart
PcBN and PCD • Metric
Inserts
Cutting Speed — vc
m/min
Material
Group
WBH10P WBH25P WBH30P WBK40U WDN00U WDN25U
min Start max min Start max min Start max min Start max min Start max min Start max
ap [mm] 0,10 0,50 0,10 0,50 0,08 0,40 0,10 1,50 0,20 2,00 0,20 2,00
f [mm/rev] 0,06 0,25 0,05 0,20 0,05 0,20 0,08 0,20 0,10 0,30 0,10 0,25
P
0/1 ––––––––––––––––––
2––––––––––––––––––
3––––––––––––––––––
4––––––––––––––––––
5––––––––––––––––––
6––––––––––––––––––
M
1––––––––––––––––––
2––––––––––––––––––
3––––––––––––––––––
K
1–––––– 400 600 800 650 800 1200 – –––––
2––––––––––––––––––
3––––––––––––––––––
N
1–––––––––––– 500 765 2500 500 765 2500
2––––––––––––––– 350 580 1000
3–––––––––––– 250 520 1000 250 520 1000
4–––––––––––– 250 400 750 250 400 750
5–––––––––––– 550 760 1000 550 760 1000
6–––––––––––– 400 460 850 400 365 750
7––––––––––––––––––
S
1–––––– 120 160 200 – ––––––––
2–––––– 120 160 200 – ––––––––
3–––––– 120 160 200 – ––––––––
4–––––––––––– 100 180 320 – ––
H
180 170 260 80 160 230 60 120 220 60 120 220 – –––––
280 170 260 80 160 230 60 120 220 60 120 220 – –––––
380 170 260 80 160 230 60 120 220 60 120 220 – –––––
480 170 260 80 160 230 60 120 220 60 120 220 – –––––
WID_Master16_Turning_Inserts_B176_B177_Metric_REBRAND.indd 176 10/30/15 2:54 PM
B177
LViWID M 16 T i I B176 B177 M i REBRANDO b 15 20159 46AM
Ceramic Inserts
CNGN/CNG
ISO
catalogue number D L10 S R¡D1
CW2015
CW3020
CW5025
CNGN120404T02020 12,70 12,90 4,76 0,4 —
2952551
–
–
CNGN120408T01020 12,70 12,90 4,76 0,8 —
–
3869578
–
CNGN120408T02020 12,70 12,90 4,76 0,8 —
2952552
–
2952082
CNGN120412T01020 12,70 12,90 4,76 1,2 —
–
3869579
–
CNGN120412T02020 12,70 12,90 4,76 1,2 —
2952603
–
2952113
CNGN120416T01020 12,70 12,90 4,76 1,6 —
–
3869580
–
CNGN120416T02020 12,70 12,90 4,76 1,6 —
2952604
–
2952114
CNGN120712T01020 12,70 12,90 7,94 1,2 —
–
3869581
–
CNGN120712T02020 12,70 12,90 7,94 1,2 —
2952605
–
2952115
CNGN120716T01020 12,70 12,90 7,94 1,6 —
–
3869582
–
P
M
K
N
S
H
rst choice
alternate choice
ISO Inserts
Inserts
C2–C49 C50–C81 C86–C129 B8–B25 B26–B28 B30–B105
WID_Master16_Turning_Inserts_B176_B177_Metric_REBRAND.indd 177 10/30/15 2:54 PM
B178
LViWID M 16 T i I B178 B179 M i REBRAND O b 15 2015 9 46 AM
widia.com
Ceramic Inserts
CNGA
ISO
catalogue number D L10 S R¡D1
CW2015
CW3020
CW5025
CNGA120404T02020 12,70 12,90 4,76 0,4 5,16
2952526
–
–
CNGA120408T02020 12,70 12,90 4,76 0,8 5,16
2952527
–
2952159
CNGA120412T02020 12,70 12,90 4,76 1,2 5,16
2952528
–
2952161
CNGA120416T02020 12,70 12,90 4,76 1,6 5,16
–
–
2952173
CNGA160612T02020 15,88 16,12 6,35 1,2 6,35
2952529
–
2952174
CNGA160616T02020 15,88 16,12 6,35 1,6 6,35
–
–
2952175
CNGA190612T02020 19,05 19,34 6,35 1,2 7,93
2952530
–
2952176
CNGA190616T02020 19,05 19,34 6,35 1,6 7,93
2952531
–
–
P
M
K
N
S
H
rst choice
alternate choice
ISO Inserts
Inserts
CNGA-FW
ISO
catalogue number D L10 S R¡D1
CW2015
CW3020
CW5025
CNGA120408T01020FW 12,70 12,90 4,76 0,8 5,16
–
–
2952158
CNGA120412T01020FW 12,70 12,90 4,76 1,2 5,16
–
–
2952160
CNGA120416T01020FW 12,70 12,90 4,76 1,6 5,16
–
–
2952162
WID_Master16_Turning_Inserts_B178_B179_Metric_REBRAND.indd 178 10/30/15 2:54 PM
B179
LViWID M 16 T i I B178 B179 M i REBRANDO b 15 20159 46AM
Ceramic Inserts
CNGX
ISO
catalogue number D L10 S R¡D1
CW2015
CW3020
CW5025
CNGX120708T02020 12,70 12,90 7,94 0,8 —
–
–
2952117
CNGX120712T02020 12,70 12,90 7,94 1,2 —
–
–
2952119
CNGX160716T02020 15,88 16,12 7,94 1,6 —
–
–
2952121
P
M
K
N
S
H
rst choice
alternate choice
ISO Inserts
Inserts
CNGX-FW
ISO
catalogue number D L10 S R¡D1
CW2015
CW3020
CW5025
CNGX120712T01020FW 12,70 12,90 7,94 1,2 —
–
–
2952118
C2–C49 C50–C81 C86–C129 B8–B25 B26–B28 B30–B105
WID_Master16_Turning_Inserts_B178_B179_Metric_REBRAND.indd 179 10/30/15 2:54 PM
B180
LViWID M 16 T i I B180 B181 M i REBRAND O b 15 2015 9 46 AM
widia.com
Ceramic Inserts
DNGN/DNG
ISO
catalogue number D L10 S R¡D1
CW2015
CW3020
CW5025
DNGN150704T02020 12,70 15,50 7,94 0,4 —
2952607
–
–
DNGN150708T01020 12,70 15,50 7,94 0,8 —
–
3869743
–
DNGN150708T02020 12,70 15,50 7,94 0,8 —
2952608
–
–
DNGN150712T02020 12,70 15,50 7,94 1,2 —
2952609
–
–
DNGN150716T01020 12,70 15,50 7,94 1,6 —
–
3869745
–
P
M
K
N
S
H
rst choice
alternate choice
ISO Inserts
Inserts
WID_Master16_Turning_Inserts_B180_B181_Metric_REBRAND.indd 180 10/30/15 2:54 PM
B181
LViWID M 16 T i I B180 B181 M i REBRANDO b 15 20159 46AM
Ceramic Inserts
DNGA
ISO
catalogue number D L10 S R¡D1
CW2015
CW3020
CW5025
DNGA150404T02020 12,70 15,50 4,76 0,4 5,16
2952532
–
–
DNGA150408T02020 12,70 15,50 4,76 0,8 5,16
2952533
–
–
DNGA150412T02020 12,70 15,50 4,76 1,2 5,16
2952534
–
2952184
DNGA150604T02020 12,70 15,50 6,35 0,4 5,16
2952535
–
–
DNGA150608T02020 12,70 15,50 6,35 0,8 5,16
2952536
–
–
DNGA150612T02020 12,70 15,50 6,35 1,2 5,16
2952537
–
2952185
P
M
K
N
S
H
rst choice
alternate choice
ISO Inserts
Inserts
DNGX
ISO
catalogue number D L10 S R¡D1
CW2015
CW3020
CW5025
DNGX120712T02020 10,00 12,21 7,94 1,2 —
–
–
2952124
DNGX120716T02020 10,00 12,21 7,94 1,6 —
–
–
2952125
DNGX150708T02020 12,70 15,50 7,94 0,8 —
–
–
2952126
DNGX150712T02020 12,70 15,50 7,94 1,2 —
–
–
2952127
DNGX150716T02020 12,70 15,50 7,94 1,6 —
–
–
2952128
C2–C49 C50–C81 C86–C129 B8–B25 B26–B28 B30–B105
WID_Master16_Turning_Inserts_B180_B181_Metric_REBRAND.indd 181 10/30/15 2:54 PM
B182
LViWID M 16 T i I B182 B183 M i REBRAND N b 11 2015 7 35 AM
widia.com
ENGN/ENG
ISO
catalogue number D L10 S R¡D1
CW2015
CW3020
CW5025
ENGN130704T02020 12,70 13,15 7,94 0,4 —
2952611
–
–
ENGN130708T02020 12,70 13,15 7,94 0,8 —
2952612
–
–
ENGN130712T02020 12,70 13,15 7,94 1,2 —
2952613
–
–
ENGN130716T02020 12,70 13,15 7,94 1,6 —
2952614
–
–
Ceramic Inserts
P
M
K
N
S
H
rst choice
alternate choice
ISO Inserts
Inserts
ENGX
ISO
catalogue number D L10 S R¡D1
CW2015
CW3020
CW5025
ENGX130716T02020 12,70 13,15 7,94 1,6 —
–
–
2952130
WID_Master16_Turning_Inserts_B182_B183_Metric_REBRAND.indd 182 11/11/15 9:21 AM
B183
LViWID M 16 T i I B182 B183 M i REBRANDN b 11 20157 35AM
Ceramic Inserts
RCGX/RCGV
ISO
catalogue number D S
CW2015
CW3020
CW5025
RCGX060400T01020 6,35 4,76
–
3869746
–
RCGX090700T02020 9,53 7,92
2952694
–
–
RCGX090700T07015 9,53 7,92
2952695
–
–
RCGX090700T01020 9,53 7,94
2952693
3869747
–
RCGX120700T01020 12,70 7,92
–
3869748
–
RCGX120700T02020 12,70 7,92
2952697
–
–
RCGX120700T20015 12,70 7,92
2952698
–
–
P
M
K
N
S
H
rst choice
alternate choice
ISO Inserts
Inserts
C2–C49 C50–C81 C86–C129 B8–B25 B26–B28 B30–B105
WID_Master16_Turning_Inserts_B182_B183_Metric_REBRAND.indd 183 11/11/15 9:21 AM
B184
LViWID M 16 T i I B184 B185 M i REBRAND O b 15 2015 9 47 AM
widia.com
Ceramic Inserts
RNGN/RNG
ISO
catalogue number D S
CW2015
CW3020
CW5025
RNGN090300T01020 9,53 3,18
–
3869749
–
RNGN090400T02020 9,53 4,76
2952615
–
–
RNGN120400T01020 12,70 4,76
–
3869750
–
RNGN120400T02020 12,70 4,76
2952616
–
2952131
RNGN120700T01020 12,70 7,94
–
3869751
–
RNGN120700T02020 12,70 7,94
2952617
–
–
RNGN120700T10015 12,70 7,94
2952618
–
–
RNGN120700T20015 12,70 7,94
2952619
–
–
RNGN150700T02020 15,88 7,94
2952620
–
2952133
P
M
K
N
S
H
rst choice
alternate choice
ISO Inserts
Inserts
WID_Master16_Turning_Inserts_B184_B185_Metric_REBRAND.indd 184 10/30/15 2:54 PM
B185
LViWID M 16 T i I B184 B185 M i REBRANDO b 15 20159 47AM
RPGV
ISO
catalogue number D S
CW2015
CW3020
CW5025
RPGX060400T01020 6,35 4,78
–
3869753
–
RPGX090700T01020 9,53 7,92
–
3869754
–
RPGX120700T01020 12,70 7,94
–
3869755
–
Ceramic Inserts
P
M
K
N
S
H
rst choice
alternate choice
ISO Inserts
Inserts
C2–C49 C50–C81 C86–C129 B8–B25 B26–B28 B30–B105
WID_Master16_Turning_Inserts_B184_B185_Metric_REBRAND.indd 185 10/30/15 2:54 PM
B186
LViWID M 16 T i I B186 B187 M i REBRAND O b 15 2015 9 47 AM
widia.com
Ceramic Inserts
SCGN/SCG
ISO
catalogue number D L10 S R¡D1
CW2015
CW3020
CW5025
SCGN090412T00520 9,53 9,53 4,76 1,2 —
–
–
2952147
P
M
K
N
S
H
rst choice
alternate choice
ISO Inserts
Inserts
SCUN/SCU
ISO
catalogue number D L10 S R¡D1
CW2015
CW3020
CW5025
SCUN120412T00520 12,70 12,70 4,76 1,2 —
2952699
–
–
WID_Master16_Turning_Inserts_B186_B187_Metric_REBRAND.indd 186 10/30/15 2:54 PM
B187
LViWID M 16 T i I B186 B187 M i REBRANDO b 15 20159 47AM
Ceramic Inserts
SNGN/SNG
P
M
K
N
S
H
rst choice
alternate choice
ISO Inserts
Inserts
(continued)
ISO
catalogue number D L10 S R¡D1
CW2015
CW3020
CW5025
SNGN090308T02020 9,53 9,53 3,18 0,8 —
2952748
–
–
SNGN090412T00515 9,53 9,53 4,76 1,2 —
2952749
–
–
SNGN120408T00520 12,70 12,70 4,76 0,8 —
2952750
–
–
SNGN120408T02020 12,70 12,70 4,76 0,8 —
2952751
–
2952135
SNGN120412T01020 12,70 12,70 4,76 1,2 —
–
3869756
–
SNGN120412T02020 12,70 12,70 4,76 1,2 —
2952752
–
2952136
SNGN120416T01020 12,70 12,70 4,76 1,6 —
–
3869757
–
SNGN120416T02020 12,70 12,70 4,76 1,6 —
–
–
2952137
SNGN120704T02020 12,70 12,70 7,94 0,4 —
2952824
–
–
SNGN120708T02020 12,70 12,70 7,94 0,8 —
2952825
–
–
SNGN120712T00520 12,70 12,70 7,94 1,2 —
2953339
–
–
SNGN120712T01020 12,70 12,70 7,94 1,2 —
–
3869758
–
C2–C49 C50–C81 C86–C129 B8–B25 B26–B28 B30–B105
WID_Master16_Turning_Inserts_B186_B187_Metric_REBRAND.indd 187 10/30/15 2:54 PM
B188
LViWID M 16 T i I B188 B189 M i REBRAND O b 15 2015 9 47 AM
widia.com
Ceramic Inserts
P
M
K
N
S
H
rst choice
alternate choice
ISO Inserts
Inserts
(SNGN/SNG — continued)
ISO
catalogue number D L10 S R¡D1
CW2015
CW3020
CW5025
SNGN120712T02020 12,70 12,70 7,94 1,2 —
2952826
–
2952138
SNGN120716T00520 12,70 12,70 7,94 1,6 —
2953340
–
–
SNGN120716T01020 12,70 12,70 7,94 1,6 —
–
3869759
–
SNGN120716T02020 12,70 12,70 7,94 1,6 —
–
–
2952139
SNGN120720T02020 12,70 12,70 7,94 2,0 —
2952828
–
–
SNGN120720T10015 12,70 12,70 7,94 2,0 —
2952829
–
–
SNGN150712T02020 15,88 15,88 7,94 1,2 —
2952830
–
–
SNGN150716T02020 15,88 15,88 7,94 1,6 —
2952831
–
–
SNGN190720K20015 19,05 19,05 7,94 2,0 —
2952832
–
–
SNGN190720T20015 19,05 19,05 7,94 2,0 —
2952833
–
–
WID_Master16_Turning_Inserts_B188_B189_Metric_REBRAND.indd 188 10/30/15 2:55 PM
B189
LViWID M 16 T i I B188 B189 M i REBRANDO b 15 20159 47AM
Ceramic Inserts
SNGA
ISO
catalogue number D L10 S R¡D1
CW2015
CW3020
CW5025
SNGA120408T02020 12,70 12,70 4,76 0,8 5,16
2952538
–
2952187
SNGA120412T02020 12,70 12,70 4,76 1,2 5,16
2952539
–
2952188
SNGA120416T02020 12,70 12,70 4,76 1,6 5,16
2952540
–
2952189
SNGA150612T02020 15,88 15,88 6,35 1,2 6,35
–
–
2952190
SNGA150616T02020 15,88 15,88 6,35 1,6 6,35
–
–
2952191
P
M
K
N
S
H
rst choice
alternate choice
ISO Inserts
Inserts
SNGX
ISO
catalogue number D L10 S R¡D1
CW2015
CW3020
CW5025
SNGX120708T02020 12,70 12,70 7,94 0,8 —
–
–
2952140
SNGX150716T02020 15,88 15,88 7,94 1,6 —
–
–
2952144
C2–C49 C50–C81 C86–C129 B8–B25 B26–B28 B30–B105
WID_Master16_Turning_Inserts_B188_B189_Metric_REBRAND.indd 189 10/30/15 2:55 PM
B190
LViWID M 16 T i I B190 B191 M i REBRAND O b 15 2015 9 48 AM
widia.com
Ceramic Inserts
SNGX-FW
ISO
catalogue number D L10 S R¡D1
CW2015
CW3020
CW5025
SNGX120712T01020FW 12,70 12,70 7,94 1,2 —
–
–
2952141
P
M
K
N
S
H
rst choice
alternate choice
ISO Inserts
Inserts
SNMX
ISO
catalogue number D L10 S R¡D1
CW2015
CW3020
CW5025
SNMX120712T02020 12,70 12,70 7,94 1,2 —
–
–
2952069
SNMX120716T02020 12,70 12,70 7,94 1,6 —
–
–
2952070
SNMX150716T02020 15,88 15,88 7,94 1,6 —
–
–
2952071
SPGN-T/SPG-T
ISO
catalogue number D L10 S R¡D1
CW2015
CW3020
CW5025
SPGN090308T01020 9,53 9,53 3,18 0,8 —
2952700
–
–
SPGN120304T01020 12,70 12,70 3,18 0,4 —
2952701
–
–
SPGN120308T01020 12,70 12,70 3,18 0,8 —
2952702
–
–
WID_Master16_Turning_Inserts_B190_B191_Metric_REBRAND.indd 190 10/30/15 2:55 PM
B191
LViWID M 16 T i I B190 B191 M i REBRANDO b 15 20159 48AM
Ceramic Inserts
SPUN-T
ISO
catalogue number D L10 S R¡D1
CW2015
CW3020
CW5025
SPUN120304T00520 12,70 12,70 3,18 0,4 —
2952703
–
–
SPUN120308T00520 12,70 12,70 3,18 0,8 —
2952704
–
–
SPUN120312T00520 12,70 12,70 3,18 1,2 —
2952705
–
–
P
M
K
N
S
H
rst choice
alternate choice
ISO Inserts
Inserts
C2–C49 C50–C81 C86–C129 B8–B25 B26–B28 B30–B105
WID_Master16_Turning_Inserts_B190_B191_Metric_REBRAND.indd 191 10/30/15 2:55 PM
B192
LViWID M 16 T i I B192 B193 M i REBRAND O b 15 2015 9 48 AM
widia.com
Ceramic Inserts
TNGN/TNG
ISO
catalogue number D L10 S R¡D1
CW2015
CW3020
CW5025
TNGN160404T02020 9,53 16,50 4,76 0,4 —
2952835
–
–
TNGN160408T01020 9,53 16,50 4,76 0,8 —
–
3869761
–
TNGN160408T02020 9,53 16,50 4,76 0,8 —
2952836
–
2952072
TNGN160412T02020 9,53 16,50 4,76 1,2 —
2952837
–
2952153
TNGN160416T02020 9,53 16,50 4,76 1,6 —
2952838
–
–
TNGN160708T02020 9,53 16,50 7,94 0,8 —
2952839
–
–
TNGN160712T02020 9,53 16,50 7,94 1,2 —
2952840
–
–
TNGN220408T02020 12,70 22,00 4,76 0,8 —
2952841
–
–
TNGN220416T02020 12,70 22,00 4,76 1,6 —
–
–
2952154
P
M
K
N
S
H
rst choice
alternate choice
ISO Inserts
Inserts
WID_Master16_Turning_Inserts_B192_B193_Metric_REBRAND.indd 192 10/30/15 2:55 PM
B193
LViWID M 16 T i I B192 B193 M i REBRANDO b 15 20159 48AM
Ceramic Inserts
TNGA
ISO
catalogue number D L10 S R¡D1
CW2015
CW3020
CW5025
TNGA160408T02020 9,53 16,50 4,76 0,8 3,81
2952541
–
2952195
TNGA160412T02020 9,53 16,50 4,76 1,2 3,81
2952542
–
2952196
TNGA160416T02020 9,53 16,50 4,76 1,6 3,81
2952543
–
2952197
TNGA220408T02020 12,70 22,00 4,76 0,8 5,16
2952544
–
–
P
M
K
N
S
H
rst choice
alternate choice
ISO Inserts
Inserts
D
Rε
D1
S
L10
60˚
C2–C49 C50–C81 C86–C129 B8–B25 B26–B28 B30–B105
WID_Master16_Turning_Inserts_B192_B193_Metric_REBRAND.indd 193 10/30/15 2:55 PM
B194
LViWID M 16 T i I B194 B195 M i REBRAND O b 15 2015 9 48 AM
widia.com
Ceramic Inserts
TPG
ISO
catalogue number D L10 S R¡D1
CW2015
CW3020
CW5025
TPGN110304T01020 6,35 11,00 3,18 0,4 —
2952706
–
–
TPGN110308T01020 6,35 11,00 3,18 0,8 —
2952707
–
–
TPGN110312T01020 6,35 11,00 3,18 1,2 —
2952708
–
–
TPGN160304T00520 9,53 16,50 3,18 0,4 —
2952709
–
–
TPGN160304T01020 9,53 16,50 3,18 0,4 —
2952710
–
–
TPGN160308T00520 9,53 16,50 3,18 0,8 —
2952711
–
–
TPGN160308T01020 9,53 16,50 3,18 0,8 —
2952712
–
–
TPGN160308T02020 9,53 16,50 3,18 0,8 —
–
–
2952155
TPGN160312T01020 9,53 16,50 3,18 1,2 —
2952713
–
–
TPGN160312T02020 9,53 16,50 3,18 1,2 —
–
–
2952156
P
M
K
N
S
H
rst choice
alternate choice
ISO Inserts
Inserts
S
WID_Master16_Turning_Inserts_B194_B195_Metric_REBRAND.indd 194 10/30/15 2:55 PM
B195
LViWID M 16 T i I B194 B195 M i REBRANDO b 15 20159 48AM
Ceramic Inserts
VNGA
ISO
catalogue number D L10 S R¡D1
CW2015
CW3020
CW5025
VNGA160404T02020 9,53 16,61 4,76 0,4 3,81
2952545
–
–
VNGA160408T02020 9,53 16,61 4,76 0,8 3,81
2952546
–
2952198
VNGA160412T02020 9,53 16,61 4,76 1,2 3,81
2952547
–
–
VNGA220408T02020 12,70 22,14 4,76 0,8 5,16
2952548
–
–
P
M
K
N
S
H
rst choice
alternate choice
ISO Inserts
Inserts
WNGA
ISO
catalogue number D L10 S R¡D1
CW2015
CW3020
CW5025
WNGA080408T02020 12,70 8,69 4,76 0,8 5,16
–
–
2952199
WNGA080412T02020 12,70 8,69 4,76 1,2 5,16
–
–
2952200
WNGA080416T02020 12,70 8,69 4,76 1,6 5,16
–
–
2952201
C2–C49 C50–C81 C86–C129 B8–B25 B26–B28 B30–B105
WID_Master16_Turning_Inserts_B194_B195_Metric_REBRAND.indd 195 10/30/15 2:55 PM
B196
LViWID M 16 T i I B196 B197 M i REBRAND O b 15 2015 9 48 AM
widia.com
WNGX
ISO
catalogue number D L10 S R¡D1
CW2015
CW3020
CW5025
WNGX080712T02020 12,70 8,69 7,94 1,2 —
–
–
2952157
P
M
K
N
S
H
rst choice
alternate choice
Ceramic Inserts
ISO Inserts
Inserts
WID_Master16_Turning_Inserts_B196_B197_Metric_REBRAND.indd 196 10/30/15 2:55 PM
B197
LViWID M 16 T i I B196 B197 M i REBRANDO b 15 20159 48AM
Cubic Boron Nitride and Polycrystalline Diamond Inserts
CCGW-C
ISO
catalogue number D L10 S R¡D1
WBH10P
WBH25P
WBH30P
WBK40U
WDN00U
WDN25U
CCGW060202EC 6,35 6,45 2,38 0,2 2,80
–
3883561
–
–
–
–
CCGW060202S01015C 6,35 6,45 2,38 0,2 2,80
3883505
–
–
–
–
–
CCGW060204S01015C 6,35 6,45 2,38 0,4 2,80
3883506
3883573
–
–
–
–
CCGW09T304S01015C 9,53 9,67 3,97 0,4 4,40
–
3883575
–
–
–
–
CCGW09T308S01015C 9,53 9,67 3,97 0,8 4,40
–
3883577
–
–
–
–
P
M
K
N
S
H
rst choice
alternate choice
ISO Inserts
Inserts
(C)
CCGW-FST
ISO
catalogue number D L10 S R¡D1
WBH10P
WBH25P
WBH30P
WBK40U
WDN00U
WDN25U
CCGW060204FST 6,35 6,45 2,38 0,4 2,80
–
–
–
–
5885722
3898746
CCGW09T304FST 9,53 9,67 3,97 0,4 4,40
–
–
–
–
5885723
3898749
CCGW09T308FST 9,53 9,67 3,97 0,8 4,40
–
–
–
–
5885724
3898750
(FST)
C2–C49 C50–C81 C86–C129 B8–B25 B26–B28 B30–B105
WID_Master16_Turning_Inserts_B196_B197_Metric_REBRAND.indd 197 10/30/15 2:55 PM
B198
LViWID M 16 T i I B198 B199 M i REBRAND O b 15 2015 9 49 AM
widia.com
Cubic Boron Nitride and Polycrystalline Diamond Inserts
CCGW-FWC
ISO
catalogue number D L10 S R¡D1
WBH10P
WBH25P
WBH30P
WBK40U
WDN00U
WDN25U
CCGW060202EFWC 6,35 6,45 2,38 0,2 2,80
–
3883560
–
–
–
–
CCGW060204EFWC 6,35 6,45 2,38 0,4 2,80
–
3883562
–
–
–
–
CCGW09T304EFWC 9,53 9,67 3,97 0,4 4,40
–
3883574
–
–
–
–
CCGW09T308EFWC 9,53 9,67 3,97 0,8 4,40
–
3883576
–
–
–
–
P
M
K
N
S
H
rst choice
alternate choice
ISO Inserts
Inserts
(FWC)
CCGW-MT
ISO
catalogue number D L10 S R¡D1
WBH10P
WBH25P
WBH30P
WBK40U
WDN00U
WDN25U
CCGW09T304S01015MT 9,52 9,67 3,99 0,4 4,40
3883507
–
–
–
–
–
CCGW09T308S01015MT 9,52 9,67 3,99 0,8 4,40
3883508
–
6018004
–
–
–
(MT)
WID_Master16_Turning_Inserts_B198_B199_Metric_REBRAND.indd 198 10/30/15 2:55 PM
B199
LViWID M 16 T i I B198 B199 M i REBRANDO b 15 20159 49AM
CCMW-FST
ISO
catalogue number D L10 S R¡D1
WBH10P
WBH25P
WBH30P
WBK40U
WDN00U
WDN25U
CCMW060204FST 6,35 6,45 2,38 0,4 2,80
–
–
–
–
–
3883135
CCMW060208FST 6,35 6,45 2,38 0,8 2,80
–
–
–
–
–
3883133
CCMW09T304FST 9,53 9,67 3,97 0,4 4,40
–
–
–
–
–
3883134
CCMW09T308FST 9,53 9,67 3,97 0,8 4,40
–
–
–
–
–
3883136
Cubic Boron Nitride and Polycrystalline Diamond Inserts
P
M
K
N
S
H
rst choice
alternate choice
ISO Inserts
Inserts
(FST)
CDHB-FST
ISO
catalogue number D L10 S R¡D1
WBH10P
WBH25P
WBH30P
WBK40U
WDN00U
WDN25U
CDHBS4T002FST 3,97 4,03 1,02 0,1 2,13
–
–
–
–
–
3898745
CDHBS4T004FST 3,97 4,03 1,02 0,2 2,13
–
–
–
–
–
3898744
(FST)
RεL10
D1
D
80º
S
15º
C2–C49 C50–C81 C86–C129 B8–B25 B26–B28 B30–B105
WID_Master16_Turning_Inserts_B198_B199_Metric_REBRAND.indd 199 10/30/15 2:55 PM
B200
LViWID M 16 T i I B200 B201 M i REBRAND O b 15 2015 9 49 AM
widia.com
Cubic Boron Nitride and Polycrystalline Diamond Inserts
CNGA-EMT
ISO
catalogue number D L10 S R¡D1
WBH10P
WBH25P
WBH30P
WBK40U
WDN00U
WDN25U
CNGA120408EMT 12,70 12,90 4,76 0,8 5,16
–
3883363
–
–
–
–
CNGA120412EMT 12,70 12,90 4,76 1,2 5,16
–
3883364
–
–
–
–
P
M
K
N
S
H
rst choice
alternate choice
ISO Inserts
Inserts
(EMT)
CNGA-FST
ISO
catalogue number D L10 S R¡D1
WBH10P
WBH25P
WBH30P
WBK40U
WDN00U
WDN25U
CNGA120404FST 12,70 12,90 4,76 0,4 5,16
–
–
–
–
5885725
3898726
CNGA120408FST 12,70 12,90 4,76 0,8 5,16
–
–
–
–
5885726
3898727
(FST)
WID_Master16_Turning_Inserts_B200_B201_Metric_REBRAND.indd 200 10/30/15 2:55 PM
B201
LViWID M 16 T i I B200 B201 M i REBRANDO b 15 20159 49AM
Cubic Boron Nitride and Polycrystalline Diamond Inserts
CNGA-FW/MW MT
ISO
catalogue number D L10 S R¡D1
WBH10P
WBH25P
WBH30P
WBK40U
WDN00U
WDN25U
CNGA120404EFWMT 12,70 12,90 4,76 0,4 5,15
–
3883356
–
–
–
–
CNGA120408EFWMT 12,70 12,90 4,76 0,8 5,16
–
3883912
–
–
–
–
CNGA120408S01025FWMT 12,70 12,90 4,78 0,8 5,16
3883523
–
–
–
–
–
P
M
K
N
S
H
rst choice
alternate choice
ISO Inserts
Inserts
(MT)
CNGA-MT
ISO
catalogue number D L10 S R¡D1
WBH10P
WBH25P
WBH30P
WBK40U
WDN00U
WDN25U
CNGA120404S01025MT 12,70 12,90 4,78 0,4 5,16
3883509
3883885
6018006
–
–
–
CNGA120408S01025MT 12,70 12,90 4,78 0,8 5,16
3883510
3883886
6018008
–
–
–
CNGA120412S01020MT 12,70 12,90 4,78 1,2 5,16
–
–
6018009
–
–
–
CNGA120412S01025MT 12,70 12,90 4,78 1,2 5,16
3883511
3883887
6018010
–
–
–
(MT)
C2–C49 C50–C81 C86–C129 B8–B25 B26–B28 B30–B105
WID_Master16_Turning_Inserts_B200_B201_Metric_REBRAND.indd 201 10/30/15 2:55 PM
B202
LViWID M 16 T i I B202 B203 M i REBRAND N b 11 2015 7 36 AM
widia.com
Cubic Boron Nitride and Polycrystalline Diamond Inserts
CNMN
ISO
catalogue number D L10 S R¡D1
WBH10P
WBH25P
WBH30P
WBK40U
WDN00U
WDN25U
CNMN090312S02020 9,53 9,67 3,18 1,2 —
–
–
–
3883278
–
–
CNMN120408S02020 12,70 12,90 4,76 0,8 —
–
–
–
3883279
–
–
CNMN120412S02020 12,70 12,90 4,76 1,2 —
–
–
–
3883280
–
–
P
M
K
N
S
H
rst choice
alternate choice
ISO Inserts
Inserts
CNMA
ISO
catalogue number D L10 S R¡D1
WBH10P
WBH25P
WBH30P
WBK40U
WDN00U
WDN25U
CNMA120408S02020 12,70 12,90 4,76 0,8 5,16
–
–
–
3883281
–
–
CNMA120412S02020 12,70 12,90 4,76 1,2 5,16
–
–
–
3883282
–
–
CNMS-FST
ISO
catalogue number D L10 S R¡D1
WBH10P
WBH25P
WBH30P
WBK40U
WDN00U
WDN25U
CNMS120408FST 12,70 12,90 4,76 0,8 5,16
–
–
–
–
–
3898729
(FST)
WID_Master16_Turning_Inserts_B202_B203_Metric_REBRAND.indd 202 11/11/15 9:21 AM
B203
LViWID M 16 T i I B202 B203 M i REBRANDN b 11 20157 36AM
CPGN
ISO
catalogue number D L10 S R¡D1
WBH10P
WBH25P
WBH30P
WBK40U
WDN00U
WDN25U
CPGN120304F 12,70 12,90 3,18 0,4 —
–
–
–
–
–
3898717
CPGN120308F 12,70 12,90 3,18 0,8 —
–
–
–
–
–
3898718
L10
D
RεS
80°
11°
Cubic Boron Nitride and Polycrystalline Diamond Inserts
P
M
K
N
S
H
rst choice
alternate choice
ISO Inserts
Inserts
CPGW-C
ISO
catalogue number D L10 S R¡D1
WBH10P
WBH25P
WBH30P
WBK40U
WDN00U
WDN25U
CPGW060202EC 6,35 6,45 2,38 0,2 2,80
–
3883578
–
–
–
–
CPGW060202S01015C 6,35 6,45 2,38 0,2 2,80
3883524
–
6018081
–
–
–
CPGW060204S01015C 6,35 6,45 2,38 0,4 2,80
3883525
3883579
6018082
–
–
–
CPGW060208S01015C 6,35 6,45 2,38 0,8 2,80
–
3883580
–
–
–
–
CPGW09T304S01015C 9,53 9,67 3,97 0,4 4,40
–
3883581
–
–
–
–
CPGW09T308S01015C 9,53 9,67 3,97 0,8 4,40
–
3883584
–
–
–
–
(C)
C2–C49 C50–C81 C86–C129 B8–B25 B26–B28 B30–B105
WID_Master16_Turning_Inserts_B202_B203_Metric_REBRAND.indd 203 11/11/15 9:21 AM
B204
LViWID M 16 T i I B204 B205 M i REBRAND O b 15 2015 9 49 AM
widia.com
Cubic Boron Nitride and Polycrystalline Diamond Inserts
CPGW-FST
ISO
catalogue number D L10 S R¡D1
WBH10P
WBH25P
WBH30P
WBK40U
WDN00U
WDN25U
CPGW060202FST 6,35 6,45 2,38 0,2 2,80
–
–
–
–
–
3898751
CPGW060204FST 6,35 6,45 2,38 0,4 2,80
–
–
–
–
–
3898752
CPGW060208FST 6,35 6,45 2,38 0,8 2,80
–
–
–
–
–
3898753
CPGW09T304FST 9,53 9,67 3,97 0,4 4,40
–
–
–
–
–
3898754
CPGW09T308FST 9,53 9,67 3,97 0,8 4,40
–
–
–
–
–
3898755
CPGW120404FST 12,70 12,90 4,76 0,4 5,50
–
–
–
–
–
3898756
CPGW120408FST 12,70 12,90 4,76 0,8 5,50
–
–
–
–
–
3898757
P
M
K
N
S
H
rst choice
alternate choice
ISO Inserts
(FST)
Inserts
CPGW-FWST
ISO
catalogue number D L10 S R¡D1
WBH10P
WBH25P
WBH30P
WBK40U
WDN00U
WDN25U
CPGW060204FWST 6,35 6,45 2,38 0,4 2,80
–
–
–
–
5885758
3898758
CPGW09T308FWST 9,53 9,67 3,97 0,8 4,40
–
–
–
–
5885759
3898759
CPGW120408FWST 12,70 12,90 4,76 0,8 5,50
–
–
–
–
5885760
3898760
(FWST)
WID_Master16_Turning_Inserts_B204_B205_Metric_REBRAND.indd 204 10/30/15 2:55 PM
B205
LViWID M 16 T i I B204 B205 M i REBRANDO b 15 20159 49AM
Cubic Boron Nitride and Polycrystalline Diamond Inserts
CPGW-MT
ISO
catalogue number D L10 S R¡D1
WBH10P
WBH25P
WBH30P
WBK40U
WDN00U
WDN25U
CPGW09T304S01015MT 9,53 9,67 3,99 0,4 4,40
3883526
–
6018084
–
–
–
CPGW09T308S01015MT 9,53 9,67 3,99 0,8 4,40
3883527
–
6018085
–
–
–
P
M
K
N
S
H
rst choice
alternate choice
ISO Inserts
Inserts
(MT)
CPMW-FST
ISO
catalogue number D L10 S R¡D1
WBH10P
WBH25P
WBH30P
WBK40U
WDN00U
WDN25U
CPMW050204FST 5,56 5,65 2,38 0,4 2,50
–
–
–
–
–
3883139
CPMW060204FST 6,35 6,45 2,38 0,4 2,80
–
–
–
–
–
3883137
(FST)
CPMW-FWST
ISO
catalogue number D L10 S R¡D1
WBH10P
WBH25P
WBH30P
WBK40U
WDN00U
WDN25U
CPMW09T304FWST 9,53 9,67 3,97 0,4 4,40
–
–
–
–
–
3883138
(FWST)
C2–C49 C50–C81 C86–C129 B8–B25 B26–B28 B30–B105
WID_Master16_Turning_Inserts_B204_B205_Metric_REBRAND.indd 205 10/30/15 2:55 PM
B206
LViWID M 16 T i I B206 B207 M i REBRAND O b 15 2015 9 50 AM
widia.com
Cubic Boron Nitride and Polycrystalline Diamond Inserts
DCGW-C
ISO
catalogue number D L10 S R¡D1
WBH10P
WBH25P
WBH30P
WBK40U
WDN00U
WDN25U
DCGW070202EC 6,35 7,75 2,38 0,2 2,80
–
3883585
–
–
–
–
DCGW070202S01015C 6,35 7,75 2,38 0,2 2,80
3883528
–
–
–
–
–
DCGW070204S01015C 6,35 7,75 2,38 0,4 2,80
3883529
3883586
–
–
–
–
P
M
K
N
S
H
rst choice
alternate choice
ISO Inserts
Inserts
(C)
DCGW-FST
ISO
catalogue number D L10 S R¡D1
WBH10P
WBH25P
WBH30P
WBK40U
WDN00U
WDN25U
DCGW070204FST 6,35 7,75 2,38 0,4 2,80
–
–
–
–
–
3898761
DCGW11T304FST 9,53 11,63 3,97 0,4 4,40
–
–
–
–
–
3898762
(FST)
DCGW-MT
ISO
catalogue number D L10 S R¡D1
WBH10P
WBH25P
WBH30P
WBK40U
WDN00U
WDN25U
DCGW11T304S01015MT 9,52 11,63 3,99 0,4 4,40
3883530
–
–
–
–
–
DCGW11T308S01015MT 9,52 11,63 3,99 0,8 4,40
3883531
–
–
–
–
–
(MT)
WID_Master16_Turning_Inserts_B206_B207_Metric_REBRAND.indd 206 10/30/15 2:55 PM
B207
LViWID M 16 T i I B206 B207 M i REBRANDO b 15 20159 50AM
Cubic Boron Nitride and Polycrystalline Diamond Inserts
DCMW-FST
ISO
catalogue number D L10 S R¡D1
WBH10P
WBH25P
WBH30P
WBK40U
WDN00U
WDN25U
DCMW070204FST 6,35 7,75 2,38 0,4 2,80
–
–
–
–
–
3883142
DCMW11T304FST 9,53 11,63 3,97 0,4 4,40
–
–
–
–
–
3883122
DCMW11T308FST 9,53 11,63 3,97 0,8 4,40
–
–
–
–
–
3883143
P
M
K
N
S
H
rst choice
alternate choice
ISO Inserts
(FST)
Inserts
DNGA-EMT
ISO
catalogue number D L10 S R¡D1
WBH10P
WBH25P
WBH30P
WBK40U
WDN00U
WDN25U
DNGA150408EMT 12,70 15,50 4,76 0,8 5,16
–
3883365
–
–
–
–
DNGA150412EMT 12,70 15,50 4,76 1,2 5,16
–
3883327
–
–
–
–
(EMT)
DNGA-FST
ISO
catalogue number D L10 S R¡D1
WBH10P
WBH25P
WBH30P
WBK40U
WDN00U
WDN25U
DNGA150404FST 12,70 15,50 4,76 0,4 5,16
–
–
–
–
5885774
3898730
DNGA150408FST 12,70 15,50 4,76 0,8 5,16
–
–
–
–
5885775
3898731
(FST)
C2–C49 C50–C81 C86–C129 B8–B25 B26–B28 B30–B105
WID_Master16_Turning_Inserts_B206_B207_Metric_REBRAND.indd 207 10/30/15 2:56 PM
B208
LViWID M 16 T i I B208 B209 M i REBRAND O b 15 2015 9 50 AM
widia.com
DNGA-FWMT
ISO
catalogue number D L10 S R¡D1
WBH10P
WBH25P
WBH30P
WBK40U
WDN00U
WDN25U
DNGA150404EFWMT 12,70 15,50 4,76 0,4 5,16
–
3883358
–
–
–
–
DNGA150408EFWMT 12,70 15,50 4,76 0,8 5,16
–
3883359
–
–
–
–
DNGA150412EFWMT 12,70 15,50 4,76 1,2 5,16
–
3883360
–
–
–
–
rst choice
alternate choice
(FWMT)
Inserts
Cubic Boron Nitride and Polycrystalline Diamond Inserts
P
M
K
N
S
H
ISO Inserts
DNGA-MT
ISO
catalogue number D L10 S R¡D1
WBH10P
WBH25P
WBH30P
WBK40U
WDN00U
WDN25U
DNGA150404S01025MT 12,70 15,50 4,78 0,4 5,16
3883532
3883888
6018090
–
–
–
DNGA150408S01025MT 12,70 15,50 4,78 0,8 5,16
3883533
3883889
–
–
–
–
(MT)
DNMA
ISO
catalogue number D L10 S R¡D1
WBH10P
WBH25P
WBH30P
WBK40U
WDN00U
WDN25U
DNMA110408S02020 9,53 11,63 4,76 0,8 3,81
–
–
–
3883313
–
–
WID_Master16_Turning_Inserts_B208_B209_Metric_REBRAND.indd 208 10/30/15 2:56 PM
B209
LViWID M 16 T i I B208 B209 M i REBRANDO b 15 20159 50AM
DNMS-FST
ISO
catalogue number D L10 S R¡D1
WBH10P
WBH25P
WBH30P
WBK40U
WDN00U
WDN25U
DNMS150404FST 12,70 15,50 4,76 0,4 5,16
–
–
–
–
5885776
3898732
DNMS150408FST 12,70 15,50 4,76 0,8 5,16
–
–
–
–
5885777
3898733
Cubic Boron Nitride and Polycrystalline Diamond Inserts
P
M
K
N
S
H
rst choice
alternate choice
ISO Inserts
Inserts
(FST)
DPGW-C
ISO
catalogue number D L10 S R¡D1
WBH10P
WBH25P
WBH30P
WBK40U
WDN00U
WDN25U
DPGW070202EC 6,35 7,75 2,38 0,2 2,80
–
3883582
–
–
–
–
DPGW070204S01015C 6,35 7,75 2,38 0,4 2,80
–
3883583
–
–
–
–
DPGW070208S01015C 6,35 7,75 2,38 0,8 2,80
–
3883587
–
–
–
–
(C)
C2–C49 C50–C81 C86–C129 B8–B25 B26–B28 B30–B105
WID_Master16_Turning_Inserts_B208_B209_Metric_REBRAND.indd 209 10/30/15 2:56 PM
B210
LViWID M 16 T i I B210 B211 M i REBRAND N b 11 2015 11 08 AM
widia.com
Cubic Boron Nitride and Polycrystalline Diamond Inserts
DPGW-FST
ISO
catalogue number D L10 S R¡D1
WBH10P
WBH25P
WBH30P
WBK40U
WDN00U
WDN25U
DPGW070202FST 6,35 7,75 2,38 0,2 2,80
–
–
–
–
5885778
3898763
DPGW070204FST 6,35 7,75 2,38 0,4 2,80
–
–
–
–
5885779
3898764
DPGW11T304FST 9,53 11,63 3,97 0,4 4,40
–
–
–
–
5885780
3898765
P
M
K
N
S
H
rst choice
alternate choice
ISO Inserts
(FST)
DPGW-FWST
ISO
catalogue number D L10 S R¡D1
WBH10P
WBH25P
WBH30P
WBK40U
WDN00U
WDN25U
DPGW070204FWST 6,35 7,75 2,38 0,2 2,80
–
–
–
–
5885792
3898766
DPGW11T304FWST 9,53 11,63 3,97 0,2 4,40
–
–
–
–
5885791
3898767
(FWST)
Inserts
RNM
ISO
catalogue number D S
WBH10P
WBH25P
WBH30P
WBK40U
WDN00U
WDN25U
RNMN090300S02020 9,53 3,18
–
–
–
3883315
–
–
RNMN120300S02020 12,70 3,18
–
–
–
3883316
–
–
RNMN120400S02020 12,70 4,76
–
–
–
3883317
–
–
WID_Master16_Turning_Inserts_B210_B211_Metric_REBRAND.indd 210 11/11/15 5:39 PM
B211
LViWID M 16 T i I B210 B211 M i REBRANDN b 11 201511 08AM
SNGA-MT
ISO
catalogue number D L10 S R¡D1
WBH10P
WBH25P
WBH30P
WBK40U
WDN00U
WDN25U
SNGA120404S01025MT 12,70 12,70 4,78 0,4 5,16
–
3883915
–
–
–
–
SNGA120408S01025MT 12,70 12,70 4,78 0,8 5,16
–
3883328
–
–
–
–
SNGA120412S01025MT 12,70 12,70 4,78 1,2 5,16
–
3883891
–
–
–
–
rst choice
alternate choice
(MT)
Cubic Boron Nitride and Polycrystalline Diamond Inserts
P
M
K
N
S
H
ISO Inserts
Inserts
SNM
ISO
catalogue number D L10 S R¡D1
WBH10P
WBH25P
WBH30P
WBK40U
WDN00U
WDN25U
SNMN090316S02020 9,53 9,53 3,18 1,6 —
–
–
–
3883320
–
–
SNMN120416T02020 12,70 12,70 4,76 1,6 —
–
–
–
3883324
–
–
C2–C49 C50–C81 C86–C129 B8–B25 B26–B28 B30–B105
WID_Master16_Turning_Inserts_B210_B211_Metric_REBRAND.indd 211 11/11/15 5:39 PM
B212
LViWID M 16 T i I B212 B213 M i REBRAND O b 15 2015 9 51 AM
widia.com
Cubic Boron Nitride and Polycrystalline Diamond Inserts
P
M
K
N
S
H
rst choice
alternate choice
ISO Inserts
SNMA
ISO
catalogue number D L10 S R¡D1
WBH10P
WBH25P
WBH30P
WBK40U
WDN00U
WDN25U
SNMA120408S02020 12,70 12,70 4,76 0,8 5,16
–
–
–
3883325
–
–
SNMA120412S02020 12,70 12,70 4,76 1,2 5,16
–
–
–
3883326
–
–
Inserts
SNMS-FST
ISO
catalogue number D L10 S R¡D1
WBH10P
WBH25P
WBH30P
WBK40U
WDN00U
WDN25U
SNMS120408FST 12,70 12,70 4,76 0,8 5,16
–
–
–
–
–
3898742
SNMS120412FST 12,70 12,70 4,76 1,2 5,16
–
–
–
–
–
3898743
TCGW-C
ISO
catalogue number D L10 S R¡D1
WBH10P
WBH25P
WBH30P
WBK40U
WDN00U
WDN25U
TCGW110202EC 6,35 11,00 2,38 0,2 2,80
–
3883588
–
–
–
–
TCGW110204S01015C 6,35 11,00 2,38 0,4 2,80
–
3883589
–
–
–
–
(FST)
(C)
WID_Master16_Turning_Inserts_B212_B213_Metric_REBRAND.indd 212 10/30/15 2:56 PM
B213
LViWID M 16 T i I B212 B213 M i REBRANDO b 15 20159 51AM
TCGW-FST
ISO
catalogue number D L10 S R¡D1
WBH10P
WBH25P
WBH30P
WBK40U
WDN00U
WDN25U
TCGW110204FST 6,35 11,00 2,38 0,4 2,80
–
–
–
–
–
3898768
TCGW16T304FST 9,53 16,50 3,97 0,4 4,40
–
–
–
–
–
3898769
(FST)
rst choice
alternate choice
Cubic Boron Nitride and Polycrystalline Diamond Inserts
P
M
K
N
S
H
ISO Inserts
TCMW-FST
ISO
catalogue number D L10 S R¡D1
WBH10P
WBH25P
WBH30P
WBK40U
WDN00U
WDN25U
TCMW110204FST 6,35 11,00 2,38 0,4 2,80
–
–
–
–
–
3883144
(FST)
TNGA-FWMT
ISO
catalogue number D L10 S R¡D1
WBH10P
WBH25P
WBH30P
WBK40U
WDN00U
WDN25U
TNGA160408EFWMT 9,53 16,50 4,76 0,8 3,81
–
3883361
–
–
–
–
TNGA160412EFWMT 9,53 16,50 4,76 1,2 3,81
–
3883362
–
–
–
–
(FWMT)
Inserts
C2–C49 C50–C81 C86–C129 B8–B25 B26–B28 B30–B105
WID_Master16_Turning_Inserts_B212_B213_Metric_REBRAND.indd 213 10/30/15 2:56 PM
B214
LViWID M 16 T i I B214 B215 M i REBRAND N b 13 2015 3 01 PM
widia.com
TNGA-MT
ISO
catalogue number D L10 S R¡D1
WBH10P
WBH25P
WBH30P
WBK40U
WDN00U
WDN25U
TNGA160404S01025MT 9,53 16,50 4,78 0,4 3,81
–
3883329
–
–
–
–
TNGA160408S01025MT 9,53 16,50 4,78 0,8 3,81
–
3883892
–
–
–
–
TNGA160412S01025MT 9,53 16,50 4,78 1,2 3,81
–
3883893
–
–
–
–
(MT)
Cubic Boron Nitride and Polycrystalline Diamond Inserts
P
M
K
N
S
H
rst choice
alternate choice
ISO Inserts
Inserts
TNMS-FST
ISO
catalogue number D L10 S R¡D1
WBH10P
WBH25P
WBH30P
WBK40U
WDN00U
WDN25U
TNMS160404FST 9,53 16,50 4,76 0,4 3,81
–
–
–
–
–
3898734
TNMS160408FST 9,53 16,50 4,76 0,8 3,81
–
–
–
–
–
3898735
(FST)
WID_Master16_Turning_Inserts_B214_B215_Metric_REBRAND.indd 214 11/13/15 4:27 PM
B215
LViWID M 16 T i I B214 B215 M i REBRANDN b 13 20153 01PM
TPGW-C
ISO
catalogue number D L10 S R¡D1
WBH10P
WBH25P
WBH30P
WBK40U
WDN00U
WDN25U
TPGW110202EC 6,35 11,00 2,38 0,2 2,80
–
3883590
–
–
–
–
TPGW110204S01015C 6,35 11,00 2,38 0,4 2,80
3883534
3883591
6018092
–
–
–
TPGW110208S01015C 6,35 11,00 2,38 0,8 2,80
3883535
3883592
6018093
–
–
–
(C)
TPGN
ISO
catalogue number D L10 S R¡D1
WBH10P
WBH25P
WBH30P
WBK40U
WDN00U
WDN25U
TPGN110304F 6,35 11,00 3,18 0,4 —
–
–
–
–
–
3898719
TPGN110308F 6,35 11,00 3,18 0,8 —
–
–
–
–
–
3898720
TPGN160304F 9,53 16,50 3,18 0,4 —
–
–
–
–
–
3898721
TPGN160308F 9,53 16,50 3,18 0,8 —
–
–
–
–
–
3898722
TPGN220408F 12,70 22,00 4,76 0,8 —
–
–
–
–
–
3898725
S
rst choice
alternate choice
P
M
K
N
S
H
Cubic Boron Nitride and Polycrystalline Diamond Inserts
ISO Inserts
Inserts
C2–C49 C50–C81 C86–C129 B8–B25 B26–B28 B30–B105
WID_Master16_Turning_Inserts_B214_B215_Metric_REBRAND.indd 215 11/13/15 4:27 PM
B216
LViWID M 16 T i I B216 B217 M i REBRAND O b 15 2015 9 51 AM
widia.com
TPGW-FST
ISO
catalogue number D L10 S R¡D1
WBH10P
WBH25P
WBH30P
WBK40U
WDN00U
WDN25U
TPGW110204FST 6,35 11,00 2,38 0,4 2,80
–
–
–
–
–
3898770
TPGW110208FST 6,35 11,00 2,38 0,8 2,80
–
–
–
–
–
3898771
TPGW16T304FST 9,53 16,50 3,97 0,4 4,40
–
–
–
–
–
3898772
TPGW16T308FST 9,53 16,50 3,97 0,8 4,40
–
–
–
–
–
3898773
P
M
K
N
S
H
rst choice
alternate choice
(FST)
Cubic Boron Nitride and Polycrystalline Diamond Inserts
ISO Inserts
Inserts
VBGW-FST
ISO
catalogue number D L10 S R¡D1
WBH10P
WBH25P
WBH30P
WBK40U
WDN00U
WDN25U
VBGW110304FST 6,35 11,07 3,18 0,4 2,80
–
–
–
–
–
3898774
VBGW160404FST 9,53 16,61 4,76 0,4 4,40
–
–
–
–
–
3898775
(FST)
VBGW-MT
ISO
catalogue number D L10 S R¡D1
WBH10P
WBH25P
WBH30P
WBK40U
WDN00U
WDN25U
VBGW160408S01015MT 9,52 16,61 4,78 0,8 4,40
3883537
–
6018095
–
–
–
VBGW160404S01015MT 9,53 16,61 4,78 0,4 4,40
3883536
–
6018094
–
–
–
(MT)
WID_Master16_Turning_Inserts_B216_B217_Metric_REBRAND.indd 216 10/30/15 2:56 PM
B217
LViWID M 16 T i I B216 B217 M i REBRANDO b 15 20159 51AM
VCMW-FST
ISO
catalogue number D L10 S R¡D1
WBH10P
WBH25P
WBH30P
WBK40U
WDN00U
WDN25U
VCMW110304FST 6,35 11,07 3,18 0,4 2,80
–
–
–
–
–
3883147
P
M
K
N
S
H
rst choice
alternate choice
(FST)
VNGA-FST
ISO
catalogue number D L10 S R¡D1
WBH10P
WBH25P
WBH30P
WBK40U
WDN00U
WDN25U
VNGA160404FST 9,53 16,61 4,76 0,4 3,81
–
–
–
–
–
3898736
VNGA160408FST 9,53 16,61 4,76 0,8 3,81
–
–
–
–
–
3898737
(FST)
VNGA-MT
ISO
catalogue number D L10 S R¡D1
WBH10P
WBH25P
WBH30P
WBK40U
WDN00U
WDN25U
VNGA160404S01025MT 9,53 16,61 4,78 0,4 3,81
3883538
3883894
6018096
–
–
–
VNGA160408S01025MT 9,53 16,61 4,78 0,8 3,81
3883539
3883896
6018097
–
–
–
(MT)
35˚
Cubic Boron Nitride and Polycrystalline Diamond Inserts
ISO Inserts
Inserts
C2–C49 C50–C81 C86–C129 B8–B25 B26–B28 B30–B105
WID_Master16_Turning_Inserts_B216_B217_Metric_REBRAND.indd 217 10/30/15 2:56 PM
B218
LViWID M 16 T i I B218 B219 M i REBRAND N b 10 2015 12 15 PM
widia.com
VNMS-FST
ISO
catalogue number D L10 S R¡D1
WBH10P
WBH25P
WBH30P
WBK40U
WDN00U
WDN25U
VNMS160404FST 9,53 16,61 4,76 0,4 3,81
–
–
–
–
–
3898738
VNMS160408FST 9,53 16,61 4,76 0,8 3,81
–
–
–
–
–
3898739
P
M
K
N
S
H
rst choice
alternate choice
(FST)
WNGA-FST
ISO
catalogue number D L10 S R¡D1
WBH10P
WBH25P
WBH30P
WBK40U
WDN00U
WDN25U
WNGA080404FST 12,70 8,69 4,76 0,4 5,16
–
–
–
–
–
3898740
WNGA080408FST 12,70 8,69 4,76 0,8 5,16
–
–
–
–
–
3898741
(FST)
Cubic Boron Nitride and Polycrystalline Diamond Inserts
ISO Inserts
Inserts
WID_Master16_Turning_Inserts_B218_B219_Metric_REBRAND.indd 218 11/10/15 2:18 PM
LViWID M 16 T i I B218 B219 M i REBRANDN b 10 201512 15PM
Available in WS10PT™ and WS25PT™, the -UR geometry provides smooth chip forming
and improved coolant fl ow for increased tool life. This positive geometry, with its unique
chipbreaker without infl ection points, reduces cutting forces and improves depth-of-cut
(DOC) notching resistance, while still providing superior edge stability.
-UR geometry offers a roughing solution for high-temp materials.
Victory™ -UR Geometry
To learn more, contact your local Authorised Distributor or visit widia.com.
WID_Master16_Turning_Inserts_B218_B219_Metric_REBRAND.indd 219 11/10/15 2:18 PM
LViWID M 16 T i H ld C000 C001 M i REBRAND D b 14 2015 2 37 PM
WID_Master16_Turning_Holders_C000_C001_Metric_REBRAND.indd 2 12/14/15 2:42 PM
LViWID M 16 T i H ld C000 C001 M i REBRANDD b 14 20152 37PM
widia.com C1
Turning • Tools for External Turning and Internal Boring
Tools for External Turning ..................................................................................................................................C2–C49
Tools for Internal Boring ...................................................................................................................................C50–C81
Tunable Boring Bars..........................................................................................................................................C82–C84
Cartridges ........................................................................................................................................................C86–C129
WID_Master16_Turning_Holders_C000_C001_Metric_REBRAND.indd 1 12/14/15 2:42 PM
LViWID M 16 T i H ld C002 C003 M i REBRAND N b 11 201511 15 AM
C2 widia.com
D-Style Clamping P-Style Clamping
Whatever your operation requirements — from light fi nishing cuts at very high cutting
speeds to heavy roughing applications — there is a WIDIA solution to meet your needs.
The complete programme includes toolholders for pin-, screw-, or clamp-type holding.
• Used for negative style inserts.
• Clamp assembly contains clamp, screw,
and retaining ring.
• Quick insert indexing.
• Ensures insert repeatability and seating.
• Reduced chatter and extended tool life.
• Lever-type clamping system for negative
indexable inserts.
• No interference to chip fl ow.
• Fast insert changes.
P-style available in metric sizes only.
Tools for External Turning
Modern machining operations performed on CNC machine tools and
fl exible production facilities require high-performance tools that provide
straightforward design and application versatility. WIDIA™ offers an extensive
range of toolholders for external turning to meet even the most exacting
production demands across a broad spectrum of workpiece shapes and sizes.
WID_Master16_Turning_Holders_C002_C003_Metric_REBRAND.indd 2 11/11/15 5:35 PM
C3
LViWID M 16 T i H ld C002 C003 M i REBRANDN b 11201511 15AM
widia.com
S-Style Clamping
C-Style Clamping
• Screw clamping system for positive
indexable inserts.
• Compact design for high reliability
and cost effi ciency.
• Carbide shim for additional
tool protection.
• Height-adjustable clamp permits
use of additional chipbreakers.
• Universal clamping system for positive
and negative fl at top inserts.
• Robust engineering makes it easy to handle.
• Carbide shim for extra tool protection.
WID_Master16_Turning_Holders_C002_C003_Metric_REBRAND.indd 3 11/11/15 5:35 PM
widia.com
C4
LViWID M 16 T i H ld C004 C005 M i REBRAND N b 11 201511 25 AM
Each unique clamping system offers product options to ll your
speci c toolholder needs. Find the illustration that ts your application
and navigate to the corresponding page to get the correct solution.
Toolholder Selection Guide
DCKN Product Name
Application Illustration
Page: C8 Page Number
D-Style Clamping
DDCKN DCLN DCRN DCSN
75° 95° 75° 45°
Page: Page: Page: Page:
C8 C9 C10 C10
One-piece clamp
assembly holder for
use with negative style
inserts. An extremely
rigid clamping system.
The tool is protected
by a carbide shim.
DDJN DDNN DRGN DSDN
93° 63° 45°
Page: Page: Page: Page:
C11 C11 C12 C12
DSKN DSRN DSSN DTFN
75° 75° 45° 90°
Page: Page: Page: Page:
C13 C14 C15 C16
DTGN DVJN DVON DVVN
90° 93° 117,5° 72,5°
Page: Page: Page: Page:
C16 C17 C18 C18
DWLN
95°
Page:
C19
P-Style Clamping
PPCBN PCKN PCLN PDJN
75° 75° 95° 93°
Page: Page: Page: Page:
C20 C21 C22 C23
Lever-type clamping
system for negative
indexable inserts with
hole to DIN 4988 and
positive round inserts
more than 20mm in
diameter. Inserts with
one- and two-side chip
control geometries have
positive rakes from 6°
to 18°. Advantages of
this system are fast
insert changes and
no interference with
chip ow.
PDNN PSBN PSDN PSKN
62,5° 75° 45° 75°
Page: Page: Page: Page:
C24 C25 C26 C26
PSSN PTFN PTGN PWLN
45° 90° 90° 95°
Page: Page: Page: Page:
C27 C28 C29 C30
WID_Master16_Turning_Holders_C004_C005_Metric_REBRAND.indd 4 11/11/15 5:35 PM
widia.com C5
LViWID M 16 T i H ld C004 C005 M i REBRANDN b 11201511 25AM
Toolholder Selection Guide
S-Style Clamping
SSCLC SCDP SCLP SDHC
95° 45° 95° 107,5°
Page: Page: Page: Page:
C42 C42 C43 C43
Screw clamping system
for positive indexable
inserts with countersunk
hole to DIN 4967.
Compact design using
a minimum of spare
parts for high reliability
and cost ef ciency.
A carbide shim
provides additional tool
protection. Toolholders
with cutting edge
heights upwards of
16mm and insert iCs
from 9,52mm are secured
by means of a threaded
bushing.
SDJC SDNC SRDC SSBC
93° 62,5° 75°
Page: Page: Page: Page:
C44 C45 C45 C46
SSSC STFC SVHB SVJB
45° 90° 107,5° 93°
Page: Page: Page: Page:
C47 C48 C48 C49
SVVB
72,5°
Page:
C49
C-Style Clamping
CCCLN-MX CCLN-MN CCLN-MF CDJN-MX
95° 95° 95° 93°
Page: Page: Page: Page:
C31 C31 C32 C32
Top clamping system
for negative and positive
indexable inserts to DIN
4968. This universal
clamping system is
robust and easy to handle.
Some height-adjustable
clamps enable the use of
additional chipbreakers.
A carbide shim provides
additional tool protection.
Toolholders with cutting
edge heights upwards
of 16mm and insert iCs
greater than 6,35mm.
CDJN-MN CELN-MF CELN-MN CKJN
93° 97,5° 97,5°
Page: Page: Page: Page:
C33 C33 C34 C34
CRDN-MN CRSN-MN CSBP CSDP
75° 45°
Page: Page: Page: Page:
C35 C35 C36 C36
CSSP CTCP CTDP CTFP
45° 90° 45° 90°
Page: Page: Page: Page:
C37 C37 C38 C38
CTGP CRDP* CRGP*
90
°
Page: Page: Page:
C39 C40 C41
*Exact Clamping System not shown.
WID_Master16_Turning_Holders_C004_C005_Metric_REBRAND.indd 5 11/11/15 5:35 PM
C6
LViWID M 16 T i H ld C006 C007 M i REBRAND O b 15 2015 9 54 AM
widia.com
DC L NR
Insert
Holding Method
Insert Shape Tool Style or
Lead Angle
Insert
Clearance Angle
Hand of Tool Additional
Information
D
A
A L N
R = C =
Deep pocket for
ceramic insert
B
B
15°
P
,
BRight hand
L = S =
C
C Q
,
CLeft hand Single pocket
locating wall
N = F =
C
D
D R P Neutral Straight shank,
no offset
E
E S D
R
H
F U E
S
K
G V
,
F
L
Y
L
M
PO
N
P
R
S
T
V
W
How Do Catalogue Numbers Work?
Each character in our catalogue number signi es a speci c trait of that
product. Use the following key columns and corresponding images
toeasily identify which attributes apply.
Toolholders
Catalogue Numbering System
DCLNR2525M12KC04
WID_Master16_Turning_Holders_C006_C007_Metric_REBRAND.indd 6 10/30/15 3:04 PM
C7
LViWID M 16 T i H ld C006 C007 M i REBRANDO b 15 20159 54AM
widia.com
By referencing this easy-to-use guide, you can
identify the correct product to meet your needs.
Toolholders
Catalogue Numbering System
25 25 M 12 KC 04
Shank Dimensions Tool Length Insert Size Additional
Information
Insert Thickness
(optional)
KC
=
04 = 4,76mm
D-Style Clamping 06
=
6,35mm
The seventh and eighth
position shall be a
signi cant two-digit
number that indicates
the holder cross section.
• If the dimension for the
width “B” or the height
“H” is represented by
a one-digit number, a
0 (zero) will be used in
front of it.
Example: 8,0mm = 08
Cutting Edge Length L10
HHexagon
120° CRhomboid
80°
D55°
OOctagon
135°
E75°
M86°
V35°
PPentagon
108°
W
Trigon
80°
with enlarged
corner angles
SSquare
90° LRectangular
90°
TTriangular
60°
AParallelogram
85°
RRound
—
B82°
K55°
L1 ISO
32 A
40 B
50 C
60 D
70 E
80 F
90 G
100 H
110 J
125 K
140 L
150 M
160 N
170 P
180 Q
200 R
250 S
300 T
350 U
400 V
450 W
500 Y
Special
Design
X
DCLNR2525M12KC04
WID_Master16_Turning_Holders_C006_C007_Metric_REBRAND.indd 7 10/30/15 3:04 PM
C8
LViWID M 16 T i H ld C008 C009 M i REBRAND O b 15 2015 9 54 AM
widia.com
D-Style Clamping Toolholders for Negative Inserts
DCKN 75°
order number catalogue number H B F L1 LH L1A B3
gage
insert shim
shim
screw
Torx
Plus
clamp
assembly
Torx
Plus
slotted
pin
optional
lock pin
right hand
5697856 DCKNR2020K12KC04 20 20 25,0 125 32,0 3,1 6,0 CN..120408 ICSN433 KMSP415IP 15 IP CM234R ASSY 15 IP SSP025016M KLM4615IP
5697857 DCKNR2525M12KC04 25 25 32,0 150 32,0 3,1 — CN..120408 ICSN443 KMSP415IP 15 IP CM234R ASSY 15 IP SSP025016M KLM46L15IP
5697858 DCKNR3225P12KC04 32 25 32,0 170 32,0 3,1 — CN..120408 ICSN443 KMSP415IP 15 IP CM234R ASSY 15 IP SSP025016M KLM46L15IP
5697859 DCKNR3232P16KC06 32 32 40,0 170 32,0 3,8 — CN..160612 ICSN543 KMSP515IP 15 IP CM209R ASSY 15 IP SSP025016M KLM58L15IP
5697880 DCKNR3232P19KC06 32 32 40,0 170 38,0 4,6 — CN..190612 ICSN643 KMSP625IP 25 IP CM210R ASSY 25 IP SSP025016M KLM68L25IP
left hand
5697853 DCKNL2020K12KC04 20 20 25,0 125 32,0 3,1 6,0 CN..120408 ICSN433 KMSP415IP 15 IP CM234R ASSY 15 IP SSP025016M KLM4615IP
5697854 DCKNL2525M12KC04 25 25 32,0 150 32,0 3,1 — CN..120408 ICSN443 KMSP415IP 15 IP CM234R ASSY 15 IP SSP025016M KLM46L15IP
5697855 DCKNL3225P12KC04 32 25 32,0 170 32,0 3,1 — CN..120408 ICSN443 KMSP415IP 15 IP CM234R ASSY 15 IP SSP025016M KLM46L15IP
Tools for External Turning and Internal Boring
See pages B30–B46
for inserts.
WID_Master16_Turning_Holders_C008_C009_Metric_REBRAND.indd 8 10/30/15 3:04 PM
C9
LViWID M 16 T i H ld C008 C009 M i REBRANDO b 15 20159 54AM
widia.com
D-Style Clamping Toolholders for Negative Inserts
DCLN 95°
order number catalogue number H B F L1 LH B3
gage
insert shim
shim
screw
Torx
Plus
clamp
assembly
Torx
Plus
slotted
pin
optional
lock pin
right hand
5697890 DCLNR1616H09KC03 16 16 20,0 100 30,0 6,0 CN..090308 ICSN332 KMSP39IP 9 IP CM234R ASSY 15 IP SSP025016M KLM34L9IP
5697891 DCLNR2020K09KC03 20 20 25,0 125 30,0 2,0 CN..090308 ICSN332 KMSP39IP 9 IP CM234R ASSY 15 IP SSP025016M KLM34L9IP
5697892 DCLNR2020K12KC04 20 20 25,0 125 32,0 4,0 CN..120408 ICSN433 KMSP415IP 15 IP CM234R ASSY 15 IP SSP025016M KLM4615IP
5697893 DCLNR2525M12KC04 25 25 32,0 150 32,0 — CN..120408 ICSN443 KMSP415IP 15 IP CM234R ASSY 15 IP SSP025016M KLM46L15IP
5697894 DCLNR2525M16KC06 25 25 32,0 150 33,0 — CN..160612 ICSN543 KMSP515IP 15 IP CM209R ASSY 15 IP SSP025016M KLM58L15IP
5697895 DCLNR3232P16KC06 32 32 40,0 170 33,0 — CN..160612 ICSN543 KMSP515IP 15 IP CM209R ASSY 15 IP SSP025016M KLM58L15IP
5697896 DCLNR3232P19KC06 32 32 40,0 170 40,0 — CN..190612 ICSN643 KMSP625IP 25 IP CM210R ASSY 25 IP SSP025016M KLM68L25IP
5697897 DCLNR4040S19KC06 40 40 50,0 250 40,0 — CN..190612 ICSN643 KMSP625IP 25 IP CM210R ASSY 25 IP SSP025016M KLM68L25IP
5697898 DCLNR4040S25KC09 40 40 50,0 250 51,0 — CN..250924 ICSN846 KMSP825IP 25 IP CM236R ASSY 25 IP SSP025018M KLM81025IP
left hand
5697881 DCLNL1616H09KC03 16 16 20,0 100 30,0 6,0 CN..090308 ICSN332 KMSP315IP 15 IP CM234R ASSY 15 IP SSP025016M KLM34L9IP
5697882 DCLNL2020K09KC03 20 20 25,0 125 30,0 2,0 CN..090308 ICSN332 KMSP315IP 15 IP CM234R ASSY 15 IP SSP025016M KLM34L9IP
5697883 DCLNL2020K12KC04 20 20 25,0 125 32,0 4,0 CN..120408 ICSN433 KMSP415IP 15 IP CM234R ASSY 15 IP SSP025016M KLM4615IP
5697884 DCLNL2525M12KC04 25 25 32,0 150 32,0 — CN..120408 ICSN443 KMSP415IP 15 IP CM234R ASSY 15 IP SSP025016M KLM46L15IP
5697885 DCLNL2525M16KC06 25 25 32,0 150 33,0 — CN..160612 ICSN543 KMSP515IP 15 IP CM209R ASSY 15 IP SSP025016M KLM58L15IP
5697886 DCLNL3232P16KC06 32 32 40,0 170 33,0 — CN..160612 ICSN543 KMSP515IP 15 IP CM209R ASSY 15 IP SSP025016M KLM58L15IP
5697887 DCLNL3232P19KC06 32 32 40,0 170 40,0 — CN..190612 ICSN643 KMSP625IP 25 IP CM210R ASSY 25 IP SSP025016M KLM68L25IP
5697888 DCLNL4040S19KC06 40 40 50,0 250 40,0 — CN..190612 ICSN643 KMSP625IP 25 IP CM210R ASSY 25 IP SSP025016M KLM68L25IP
5697889 DCLNL4040S25KC09 40 40 50,0 250 51,0 — CN..250924 ICSN846 KMSP825IP 25 IP CM236R ASSY 25 IP SSP025018M KLM81025IP
Tools for External Turning and Internal Boring
See pages B30–B46
for inserts.
WID_Master16_Turning_Holders_C008_C009_Metric_REBRAND.indd 9 10/30/15 3:04 PM
C10
LViWID M 16 T i H ld C010 C011 M i REBRAND N b 11 201511 28 AM
widia.com
D-Style Clamping Toolholders for Negative Inserts
DCRN 75°
order number catalogue number H B F L1 LH FA
gage
insert shim
shim
screw
Torx
Plus
clamp
assembly
Torx
Plus
slotted
pin
optional
lock pin
right hand
5697903 DCRNR2020K12KC04 20 20 25,0 125 32,0 3,3 CN..120408 ICSN433 KMSP415IP 15 IP CM234R ASSY 15 IP SSP025016M KLM4615IP
5697904 DCRNR2525M12KC04 25 25 32,0 150 32,0 3,3 CN..120408 ICSN443 KMSP415IP 15 IP CM234R ASSY 15 IP SSP025016M KLM46L15IP
5697905 DCRNR3225P12KC04 32 25 32,0 170 32,0 3,3 CN..120408 ICSN443 KMSP415IP 15 IP CM234R ASSY 15 IP SSP025016M KLM46L15IP
5697906 DCRNR3232P16KC06 32 32 40,0 170 38,0 4,1 CN..160612 ICSN543 KMSP515IP 15 IP CM209R ASSY 15 IP SSP025016M KLM58L15IP
5697907 DCRNR3232P19KC06 32 32 40,0 170 38,0 4,9 CN..190612 ICSN643 KMSP625IP 25 IP CM210R ASSY 25 IP SSP025016M KLM68L25IP
left hand
5697899 DCRNL2020K12KC04 20 20 25,0 125 32,0 3,3 CN..120408 ICSN433 KMSP415IP 15 IP CM234R ASSY 15 IP SSP025016M KLM4615IP
5697900 DCRNL2525M12KC04 25 25 32,0 150 32,0 3,3 CN..120408 ICSN443 KMSP415IP 15 IP CM234R ASSY 15 IP SSP025016M KLM46L15IP
5697901 DCRNL3225P12KC04 32 25 32,0 170 32,0 3,3 CN..120408 ICSN443 KMSP415IP 15 IP CM234R ASSY 15 IP SSP025016M KLM46L15IP
5697902 DCRNL3232P16KC06 32 32 40,0 170 38,0 4,1 CN..160612 ICSN543 KMSP515IP 15 IP CM209R ASSY 15 IP SSP025016M KLM58L15IP
DCSN 45°
order number catalogue number H B F L1 LH FA L1A
gage
insert shim
shim
screw
Torx
Plus
clamp
assembly
Torx
Plus
slotted
pin
optional
lock pin
right hand
5697911 DCSNR2020K12KC04 20 20 25,0 125 35,0 8,2 8,5 CN..120408 ICSN433 KMSP415IP 15 IP CM234R ASSY 15 IP SSP025016M KLM4615IP
5697913 DCSNR2525M12KC04 25 25 32,0 150 35,0 8,2 8,5 CN..120408 ICSN443 KMSP415IP 15 IP CM234R ASSY 15 IP SSP025016M KLM46L15IP
left hand
5697908 DCSNL2020K12KC04 20 20 25,0 125 35,0 8,2 8,5 CN..120408 ICSN433 KMSP415IP 15 IP CM234R ASSY 15 IP SSP025016M KLM4615IP
5697909 DCSNL2525M12KC04 25 25 32,0 150 35,0 8,2 8,5 CN..120408 ICSN443 KMSP415IP 15 IP CM234R ASSY 15 IP SSP025016M KLM46L15IP
Tools for External Turning and Internal Boring
See pages B30–B46
for inserts.
See pages B30–B46
for inserts.
WID_Master16_Turning_Holders_C010_C011_Metric_REBRAND.indd 10 11/11/15 5:36 PM
C11
LViWID M 16 T i H ld C010 C011 M i REBRANDN b 11 201511 28AM
widia.com
D-Style Clamping Toolholders for Negative Inserts
DDJN 93°
order number catalogue number H B F L1 LH B3
gage
insert shim
shim
screw
Torx
Plus
clamp
assembly
Torx
Plus
slotted
pin
optional
lock pin
right hand
5697924 DDJNR2020K11KC04 20 20 25,0 125 30,0 2,0 DN..110408 IDSN322 KMSP315IP 15 IP CM234R ASSY 15 IP SSP025016M KLM34L9IP
5697926 DDJNR2020K15KC06 20 20 25,0 125 32,0 4,0 DN..150608 IDSN433 KMSP415IP 15 IP CM234R ASSY 15 IP SSP025016M KLM46L15IP
5697928 DDJNR2525M11KC04 25 25 32,0 150 30,0 — DN..110408 IDSN322 KMSP315IP 15 IP CM234R ASSY 15 IP SSP025016M KLM34L9IP
5697930 DDJNR2525M15KC06 25 25 32,0 150 32,0 — DN..150608 IDSN433 KMSP415IP 15 IP CM234R ASSY 15 IP SSP025016M KLM46L15IP
5697932 DDJNR3225P15KC06 32 25 32,0 170 32,0 — DN..150608 IDSN433 KMSP415IP 15 IP CM234R ASSY 15 IP SSP025016M KLM46L15IP
5564336 DDJNR3232P15KC06 32 32 40,0 170 32,0 — DN..150608 IDSN433 KMSP415IP 15 IP CM234R ASSY 15 IP SSP025016M KLM46L15IP
left hand
5697915 DDJNL2020K11KC04 20 20 25,0 125 30,0 2,0 DN..110408 IDSN322 KMSP315IP 15 IP CM234R ASSY 15 IP SSP025016M KLM34L9IP
5697916 DDJNL2020K15KC06 20 20 25,0 125 32,0 4,0 DN..150608 IDSN433 KMSP415IP 15 IP CM234R ASSY 15 IP SSP025016M KLM46L15IP
5697918 DDJNL2525M11KC04 25 25 32,0 150 30,0 — DN..110408 IDSN322 KMSP315IP 15 IP CM234R ASSY 15 IP SSP025016M KLM34L9IP
5697920 DDJNL2525M15KC06 25 25 32,0 150 32,0 — DN..150608 IDSN443 KMSP415IP 15 IP CM234R ASSY 15 IP SSP025016M KLM46L15IP
5697922 DDJNL3225P15KC06 32 25 32,0 170 32,0 — DN..150608 IDSN433 KMSP415IP 15 IP CM234R ASSY 15 IP SSP025016M KLM46L15IP
5564335 DDJNL3232P15KC06 32 32 40,0 171 32,0 — DN..150608 IDSN433 KMSP415IP 15 IP CM234R ASSY 15 IP SSP025016M KLM46L15IP
DDNN 63°
order number catalogue number H B F L1 LH B3
gage
insert shim
shim
screw
Torx
Plus
clamp
assembly
Torx
Plus
slotted
pin
optional
lock pin
right hand
5697940 DDNNR2020K15KC06 20 20 10,0 125 40,0 2,5 DN..150608 IDSN443 KMSP415IP 15 IP CM234R ASSY 15 IP SSP025016M KLM46L15IP
5697942 DDNNR2525M15KC06 25 25 13,0 150 40,0 — DN..150608 IDSN443 KMSP415IP 15 IP CM234R ASSY 15 IP SSP025016M KLM46L15IP
left hand
5697934 DDNNL2020K15KC06 20 20 10,0 125 40,0 2,5 DN..150608 IDSN443 KMSP415IP 15 IP CM234R ASSY 15 IP SSP025016M KLM46L15IP
5697936 DDNNL2525M15KC06 25 25 13,0 150 40,0 — DN..150608 IDSN443 KMSP415IP 15 IP CM234R ASSY 15 IP SSP025016M KLM46L15IP
5697938 DDNNL3225P15KC06 32 25 13,0 170 40,0 — DN..150608 IDSN443 KMSP415IP 15 IP CM234R ASSY 15 IP SSP025016M KLM46L15IP
Tools for External Turning and Internal Boring
See pages B47–B64
for inserts.
See pages B47–B64
for inserts.
WID_Master16_Turning_Holders_C010_C011_Metric_REBRAND.indd 11 11/11/15 5:36 PM
C12
LViWID M 16 T i H ld C012 C013 M i REBRAND O b 15 2015 9 55 AM
widia.com
D-Style Clamping Toolholders for Negative Inserts
DRGN
order number catalogue number H B F L1 LH
gage
insert shim
shim
screw
Torx
Plus
clamp
assembly
Torx
Plus
slotted
pin
optional
lock pin
right hand
5697948 DRGNR2525M12KC04 25 25 32,0 150 32,0 RN..120400 IRSN44 KMSP415IP 15 IP CM234R ASSY 15 IP SSP025016M KLM46L15IP
5697950 DRGNR3225P12KC04 32 25 32,0 170 32,0 RN..120400 IRSN44 KMSP415IP 15 IP CM234R ASSY 15 IP SSP025016M KLM46L15IP
5697952 DRGNR4040S25KC09 40 40 50,0 250 48,0 RN..250900 IRSN84 KMSP825IP 25 IP —25 IP SSP025018M KLM81025IP
left hand
5697944 DRGNL3225P12KC04 32 25 32,0 170 32,0 RN..120400 IRSN44 KMSP415IP 15 IP CM234R ASSY 15 IP SSP025016M KLM46L15IP
5697946 DRGNL4040S25KC09 40 40 50,0 250 48,0 RN..250900 IRSN84 KMSP825IP 25 IP CM236R ASSY 25 IP SSP025018M KLM81025IP
DSDN 45°
order number catalogue number H B F L1 LH
gage
insert shim
shim
screw
Torx
Plus
clamp
assembly
Torx
Plus
slotted
pin
optional
lock pin
5697954 DSDNN2020K12KC04 20 20 10,0 125 36,0 SN..120408 ISSN433 KMSP415IP 15 IP CM234R ASSY 15 IP SSP025016M KLM4615IP
5697955 DSDNN2525M12KC04 25 25 12,0 150 36,0 SN..120408 ISSN443 KMSP415IP 15 IP CM234R ASSY 15 IP SSP025016M KLM46L15IP
5697957 DSDNN2525M15KC06 25 25 12,0 150 42,0 SN..150612 ISSN543 KMSP515IP 15 IP CM209R ASSY 15 IP SSP025016M KLM58L15IP
5697959 DSDNN3225P12KC04 32 25 12,0 170 36,0 SN..120408 ISSN443 KMSP415IP 15 IP CM234R ASSY 15 IP SSP025016M KLM46L15IP
5697961 DSDNN3232P19KC06 32 32 15,5 170 44,0 SN..190612 ISSN643 KMSP625IP 25 IP CM210R ASSY 25 IP SSP025016M KLM68L25IP
5697963 DSDNN4040S25KC09 40 40 19,5 250 59,0 SN..250924 ISSN846 KMSP825IP 40 IP CM236R ASSY 25 IP SSP025018M KLM81025IP
Tools for External Turning and Internal Boring
See pages B65–B67
for inserts.
See pages B68–B80
for inserts.
WID_Master16_Turning_Holders_C012_C013_Metric_REBRAND.indd 12 10/30/15 3:05 PM
C13
LViWID M 16 T i H ld C012 C013 M i REBRANDO b 15 20159 55AM
widia.com
D-Style Clamping Toolholders for Negative Inserts
DSKN 75°
order number catalogue number H B F L1 LH L1A B3
gage
insert shim
shim
screw
Torx
Plus
clamp
assembly
Torx
Plus
slotted
pin
optional
lock pin
right hand
5696685 DSKNR2020K12KC04 20 20 25,0 125 32,0 3,1 8,0 SN..120408 ISSN433 KMSP415IP 15 IP CM234R ASSY 15 IP SSP025016M KLM4615IP
5696686 DSKNR2525M12KC04 25 25 32,0 150 32,0 3,1 4,0 SN..120408 ISSN443 KMSP415IP 15 IP CM234R ASSY 15 IP SSP025016M KLM46L15IP
5696687 DSKNR3225P12KC04 32 25 32,0 170 32,0 3,1 — SN..120408 ISSN443 KMSP415IP 15 IP CM234R ASSY 15 IP SSP025016M KLM46L15IP
5696688 DSKNR3232P15KC06 32 32 40,0 170 32,0 3,8 — SN..150612 ISSN543 KMSP515IP 15 IP CM209R ASSY 15 IP SSP025016M KLM58L15IP
5696689 DSKNR3232P19KC06 32 32 40,0 170 38,0 4,6 — SN..190612 ISSN643 KMSP625IP 25 IP CM210R ASSY 25 IP SSP025016M KLM68L25IP
left hand
5696682 DSKNL2525M12KC04 25 25 32,0 150 32,0 3,1 4,0 SN..120408 ISSN443 KMSP415IP 15 IP CM234R ASSY 15 IP SSP025016M KLM46L15IP
5696683 DSKNL3225P12KC04 32 25 32,0 170 32,0 3,1 — SN..120408 ISSN443 KMSP415IP 15 IP CM234R ASSY 15 IP SSP025016M KLM46L15IP
5696684 DSKNL3232P15KC06 32 32 40,0 170 32,0 3,8 — SN..150612 ISSN543 KMSP515IP 15 IP CM209R ASSY 15 IP SSP025016M KLM58L15IP
Tools for External Turning and Internal Boring
See pages B68–B80
for inserts.
WID_Master16_Turning_Holders_C012_C013_Metric_REBRAND.indd 13 10/30/15 3:05 PM
C14
LViWID M 16 T i H ld C014 C015 M i REBRAND O b 15 2015 9 55 AM
widia.com
D-Style Clamping Toolholders for Negative Inserts
DSRN 75°
order number catalogue number H B F L1 LH FA
gage
insert shim
shim
screw
Torx
Plus
clamp
assembly
Torx
Plus
slotted
pin
optional
lock pin
right hand
5696703 DSRNR2020K12KC04 20 20 22,0 125 32,0 3,3 SN..120408 ISSN433 KMSP415IP 15 IP CM234R ASSY 15 IP SSP025016M KLM4615IP
5696704 DSRNR2525M12KC04 25 25 27,0 150 32,0 3,3 SN..120408 ISSN443 KMSP415IP 15 IP CM234R ASSY 15 IP SSP025016M KLM46L15IP
5696705 DSRNR3232P15KC06 32 32 35,0 170 38,0 4,0 SN..150612 ISSN543 KMSP515IP 15 IP CM209R ASSY 15 IP SSP025016M KLM58L15IP
5696706 DSRNR3232P19KC06 32 32 35,0 170 42,0 4,8 SN..190612 ISSN643 KMSP625IP 25 IP CM210R ASSY 25 IP SSP025016M KLM68L25IP
5696707 DSRNR4040S25KC09 40 40 43,0 250 52,0 6,1 SN..250924 ISSN846 KMSP825IP 25 IP CM236R ASSY 25 IP SSP025018M KLM81025IP
left hand
5696700 DSRNL2525M12KC04 25 25 27,0 150 32,0 3,3 SN..120408 ISSN443 KMSP415IP 15 IP CM234R ASSY 15 IP SSP025016M KLM46L15IP
5696701 DSRNL3232P15KC06 32 32 35,0 170 38,0 4,0 SN..150612 ISSN543 KMSP515IP 15 IP CM209R ASSY 15 IP SSP025016M KLM58L15IP
5696702 DSRNL4040S25KC09 40 40 43,0 250 52,0 6,1 SN..250924 ISSN846 KMSP825IP 25 IP CM236R ASSY 25 IP SSP025018M KLM81025IP
Tools for External Turning and Internal Boring
See pages B68–B80
for inserts.
WID_Master16_Turning_Holders_C014_C015_Metric_REBRAND.indd 14 10/30/15 3:05 PM
C15
LViWID M 16 T i H ld C014 C015 M i REBRANDO b 15 20159 55AM
widia.com
D-Style Clamping Toolholders for Negative Inserts
DSSN 45°
order number catalogue number H B F L1 LH FA L1A
gage
insert shim
shim
screw
Torx
Plus
clamp
assembly
Torx
Plus
slotted
pin
optional
lock pin
right hand
5696713 DSSNR2020K12KC04 20 20 25,0 125 36,0 8,4 8,7 SN..120408 ISSN433 KMSP415IP 15 IP CM234R ASSY 15 IP SSP025016M KLM4615IP
5696714 DSSNR2525M12KC04 25 25 32,0 150 36,0 8,4 8,7 SN..120408 ISSN443 KMSP415IP 15 IP CM234R ASSY 15 IP SSP025016M KLM46L15IP
5696715 DSSNR2525M15KC06 25 25 32,0 150 42,0 10,5 10,7 SN..150612 ISSN543 KMSP515IP 15 IP CM209R ASSY 15 IP SSP025016M KLM58L15IP
5696716 DSSNR3225P12KC04 32 25 32,0 170 35,4 8,4 8,7 SN..120408 ISSN443 KMSP415IP 15 IP CM234R ASSY 15 IP SSP025016M KLM46L15IP
5696717 DSSNR3232P15KC06 32 32 40,0 170 40,3 10,5 10,7 SN..150612 ISSN543 KMSP515IP 15 IP CM209R ASSY 15 IP SSP025016M KLM58L15IP
5696718 DSSNR3232P19KC06 32 32 40,0 170 44,0 12,7 10,7 SN..190612 ISSN643 KMSP625IP 25 IP CM210R ASSY 25 IP SSP025016M KLM68L25IP
left hand
5696708 DSSNL2020K12KC04 20 20 25,0 125 36,0 8,4 8,7 SN..120408 ISSN433 KMSP415IP 15 IP CM234R ASSY 15 IP SSP025016M KLM4615IP
5696709 DSSNL2525M12KC04 25 25 32,0 150 36,0 8,4 8,7 SN..120408 ISSN443 KMSP415IP 15 IP CM234R ASSY 15 IP SSP025016M KLM46L15IP
5696710 DSSNL3225P12KC04 32 25 32,0 170 35,4 8,4 8,7 SN..120408 ISSN443 KMSP415IP 15 IP CM234R ASSY 15 IP SSP025016M KLM46L15IP
5696711 DSSNL3232P15KC06 32 32 40,0 170 40,3 10,5 10,7 SN..150612 ISSN543 KMSP515IP 15 IP CM209R ASSY 15 IP SSP025016M KLM58L15IP
5696712 DSSNL3232P19KC06 32 32 40,0 170 44,0 12,7 10,7 SN..190612 ISSN643 KMSP625IP 25 IP CM210R ASSY 25 IP SSP025016M KLM68L25IP
Tools for External Turning and Internal Boring
See pages B68–B80
for inserts.
WID_Master16_Turning_Holders_C014_C015_Metric_REBRAND.indd 15 10/30/15 3:05 PM
C16
LViWID M 16 T i H ld C016 C017 M i REBRAND O b 15 2015 9 56 AM
widia.com
D-Style Clamping Toolholders for Negative Inserts
DTFN 90°
order number catalogue number H B F L1 LH
gage
insert shim
shim
screw
Torx
Plus
clamp
assembly
Torx
Plus
slotted
pin
optional
lock pin
right hand
5696724 DTFNR2020K16KC04 20 20 25,0 125 32,0 TN..160408 ITSN323 KMSP315IP 15 IP CM234R ASSY 15 IP SSP025016M KLM34L9IP
5696725 DTFNR2525M16KC04 25 25 32,0 150 32,0 TN..160408 ITSN323 KMSP315IP 15 IP CM234R ASSY 15 IP SSP025016M KLM34L9IP
5696726 DTFNR3232P27KC06 32 32 40,0 170 38,0 TN..270612 ITSN534 KMSP515IP 15 IP CM209R ASSY 15 IP SSP025016M KLM5815IP
left hand
5696719 DTFNL2020K16KC04 20 20 25,0 125 32,0 TN..160408 ITSN323 KMSP315IP 15 IP CM234R ASSY 15 IP SSP025016M KLM34L9IP
5696720 DTFNL2525M16KC04 25 25 32,0 150 32,0 TN..160408 ITSN323 KMSP315IP 15 IP CM234R ASSY 15 IP SSP025016M KLM34L9IP
5696721 DTFNL2525M22KC04 25 25 32,0 150 34,0 TN..220408 ITSN433 KMSP415IP 15 IP CM234R ASSY 15 IP SSP025016M KLM46L15IP
5696722 DTFNL3225P16KC04 32 25 32,0 170 32,0 TN..160408 ITSN323 KMSP315IP 15 IP CM234R ASSY 15 IP SSP025016M KLM34L9IP
5696723 DTFNL3225P22KC04 32 25 32,0 170 34,0 TN..220408 ITSN433 KMSP415IP 15 IP CM234R ASSY 15 IP SSP025016M KLM46L15IP
DTGN 90°
order number catalogue number H B F L1 LH B3
gage
insert shim
shim
screw
Torx
Plus
clamp
assembly
Torx
Plus
slotted
pin
optional
lock pin
right hand
5696729 DTGNR2020K16KC04 20 20 25,0 125 25,0 6,5 TN..160408 ITSN323 KMSP315IP 15 IP CM234R ASSY 15 IP SSP025016M KLM34L9IP
5696730 DTGNR2525M16KC04 25 25 32,0 150 25,0 — TN..160408 ITSN323 KMSP315IP 15 IP CM234R ASSY 15 IP SSP025016M KLM34L9IP
5696731 DTGNR2525M22KC04 25 25 32,0 150 32,0 3,0 TN..220408 ITSN433 KMSP415IP 15 IP CM234R ASSY 15 IP SSP025016M KLM46L15IP
left hand
5696727 DTGNL2020K16KC04 20 20 25,0 125 25,0 6,5 TN..160408 ITSN323 KMSP315IP 15 IP CM234R ASSY 15 IP SSP025016M KLM34L9IP
5696728 DTGNL2525M16KC04 25 25 32,0 150 25,0 — TN..160408 ITSN323 KMSP315IP 15 IP CM234R ASSY 15 IP SSP025016M KLM34L9IP
Tools for External Turning and Internal Boring
See pages B81–B93
for inserts.
See pages B81–B93
for inserts.
WID_Master16_Turning_Holders_C016_C017_Metric_REBRAND.indd 16 10/30/15 3:05 PM
C17
LViWID M 16 T i H ld C016 C017 M i REBRANDO b 15 20159 56AM
widia.com
D-Style Clamping Toolholders for Negative Inserts
L1
H
3°
93°
B
F
H1
DVJN 93°
order number catalogue number H B F L1 LH
gage
insert shim
shim
screw
Torx
Plus
clamp
assembly
Torx
Plus
slotted
pin
optional
lock pin
right hand
5696737 DVJNR2020K16KC04 20 20 25,0 125 46,0 VN..160408 IVSN322 KMSP315IP 15 IP CM215R ASSY 15 IP SSP025016M KLM34L9IP
5696738 DVJNR2525M16KC04 25 25 32,0 150 46,0 VN..160408 IVSN322 KMSP315IP 15 IP CM215R ASSY 15 IP SSP025016M KLM34L9IP
5696739 DVJNR2525M22KC04 25 25 32,0 150 55,0 VN..220408 IVSN432 KMSP415IP 15 IP CM235R ASSY 15 IP SSP025016M KLM4615IP
5696740 DVJNR3225P16KC04 32 25 32,0 170 46,0 VN..160408 IVSN322 KMSP315IP 15 IP CM215R ASSY 15 IP SSP025016M KLM34L9IP
5696741 DVJNR3225P22KC04 32 25 32,0 170 55,0 VN..220408 IVSN432 KMSP415IP 15 IP CM235R ASSY 15 IP SSP025016M KLM4615IP
left hand
5696732 DVJNL2020K16KC04 20 20 25,0 125 46,0 VN..160408 IVSN322 KMSP315IP 15 IP CM215R ASSY 15 IP SSP025016M KLM34L9IP
5696733 DVJNL2525M16KC04 25 25 32,0 150 46,0 VN..160408 IVSN322 KMSP315IP 15 IP CM215R ASSY 15 IP SSP025016M KLM34L9IP
5696734 DVJNL2525M22KC04 25 25 32,0 150 55,0 VN..220408 IVSN432 KMSP415IP 15 IP CM235R ASSY 15 IP SSP025016M KLM4615IP
5696735 DVJNL3225P16KC04 32 25 32,0 170 46,0 VN..160408 IVSN322 KMSP315IP 15 IP CM215R ASSY 15 IP SSP025016M KLM34L9IP
5696736 DVJNL3225P22KC04 32 25 32,0 170 55,0 VN..220408 IVSN432 KMSP415IP 15 IP CM235R ASSY 15 IP SSP025016M KLM4615IP
Tools for External Turning and Internal Boring
See pages B94–B99
for inserts.
WID_Master16_Turning_Holders_C016_C017_Metric_REBRAND.indd 17 10/30/15 3:05 PM
C18
LViWID M 16 T i H ld C018 C019 M i REBRAND O b 15 2015 9 55 AM
widia.com
D-Style Clamping Toolholders for Negative Inserts
DVON 117,5°
order number catalogue number H B F L1 LH B3
gage
insert shim
shim
screw
Torx
Plus
clamp
assembly
Torx
Plus
slotted
pin
optional
lock pin
right hand
5696745 DVONR2020K16KC04 20 20 27,0 125 38,0 5,0 VN..160408 IVSN322 KMSP315IP 15 IP CM215R ASSY 15 IP SSP025016M KLM34L9IP
5696746 DVONR2525M16KC04 25 25 32,0 150 38,0 — VN..160408 IVSN322 KMSP315IP 15 IP CM215R ASSY 15 IP SSP025016M KLM34L9IP
5696747 DVONR3225P16KC04 32 25 32,0 170 38,0 — VN..160408 IVSN322 KMSP315IP 15 IP CM215R ASSY 15 IP SSP025016M KLM34L9IP
left hand
5696742 DVONL2020K16KC04 20 20 27,0 125 38,0 5,0 VN..160408 IVSN322 KMSP315IP 15 IP CM215R ASSY 15 IP SSP025016M KLM34L9IP
5696743 DVONL2525M16KC04 25 25 32,0 150 38,0 — VN..160408 IVSN322 KMSP315IP 15 IP CM215R ASSY 15 IP SSP025016M KLM34L9IP
5696744 DVONL3225P16KC04 32 25 32,0 170 38,0 — VN..160408 IVSN322 KMSP315IP 15 IP CM215R ASSY 15 IP SSP025016M KLM34L9IP
L1
H
72,5°
B
F
H1
17,5°
DVVN 72,5°
order number catalogue number H B F L1 LH
gage
insert shim
shim
screw
Torx
Plus
clamp
assembly
Torx
Plus
slotted
pin
optional
lock pin
5696748 DVVNN2020K16KC04 20 20 9,5 125 48,0 VN..160408 IVSN322 KMSP315IP 15 IP CM215R ASSY 15 IP SSP025016M KLM34L9IP
5696749 DVVNN2525M16KC04 25 25 12,0 150 48,0 VN..160408 IVSN322 KMSP315IP 15 IP CM215R ASSY 15 IP SSP025016M KLM34L9IP
5696750 DVVNN3225P16KC04 32 25 12,0 170 48,0 VN..160408 IVSN322 KMSP315IP 15 IP CM215R ASSY 15 IP SSP025016M KLM34L9IP
Tools for External Turning and Internal Boring
See pages B94–B99
for inserts.
See pages B94–B99
for inserts.
WID_Master16_Turning_Holders_C018_C019_Metric_REBRAND.indd 18 10/30/15 3:05 PM
C19
LViWID M 16 T i H ld C018 C019 M i REBRANDO b 15 20159 55AM
widia.com
D-Style Clamping Toolholders for Negative Inserts
DWLN 95°
order number catalogue number H B F L1 LH B3
gage
insert shim
shim
screw
Torx
Plus
clamp
assembly
Torx
Plus
slotted
pin
optional
lock pin
right hand
5696757 DWLNR2020K06KC04 20 20 25,0 125 31,0 — WN..060408 IWSN322 KMSP315IP 15 IP CM234R ASSY 15 IP SSP025016M KLM34L9IP
5696758 DWLNR2020K08KC04 20 20 25,0 125 33,0 — WN..080408 IWSN433 KMSP415IP 15 IP CM234R ASSY 15 IP SSP025016M KLM4615IP
5696759 DWLNR2525M06KC04 25 25 32,0 150 25,0 — WN..060408 IWSN322 KMSP315IP 15 IP CM234R ASSY 15 IP SSP025016M KLM34L9IP
5696760 DWLNR2525M08KC04 25 25 32,0 150 25,0 4,0 WN..080408 IWSN433 KMSP415IP 15 IP CM234R ASSY 15 IP SSP025016M KLM4615IP
5696761 DWLNR3225P08KC04 32 25 32,0 170 25,0 4,0 WN..080408 IWSN433 KMSP415IP 15 IP CM234R ASSY 15 IP SSP025016M KLM4615IP
5696762 DWLNR3232P08KC04 32 32 40,0 170 25,0 — WN..080408 IWSN433 KMSP415IP 15 IP CM234R ASSY 15 IP SSP025016M KLM4615IP
left hand
5696751 DWLNL2020K06KC04 20 20 25,0 125 31,0 — WN..060408 IWSN322 KMSP39IP 15 IP CM234R ASSY 15 IP SSP025016M KLM34L9IP
5696752 DWLNL2020K08KC04 20 20 25,0 125 33,0 — WN..080408 IWSN433 KMSP415IP 15 IP CM234R ASSY 15 IP SSP025016M KLM4615IP
5696753 DWLNL2525M06KC04 25 25 32,0 150 25,0 — WN..060408 IWSN322 KMSP315IP 15 IP CM234R ASSY 15 IP SSP025016M KLM34L9IP
5696754 DWLNL2525M08KC04 25 25 32,0 150 25,0 4,0 WN..080408 IWSN433 KMSP415IP 15 IP CM234R ASSY 15 IP SSP025016M KLM4615IP
5696755 DWLNL3225P08KC04 32 25 32,0 170 25,0 4,0 WN..080408 IWSN433 KMSP415IP 15 IP CM234R ASSY 15 IP SSP025016M KLM4615IP
5696756 DWLNL3232P08KC04 32 32 40,0 170 25,0 — WN..080408 IWSN433 KMSP415IP 15 IP CM234R ASSY 15 IP SSP025016M KLM4615IP
Tools for External Turning and Internal Boring
See pages B99–B105
for inserts.
WID_Master16_Turning_Holders_C018_C019_Metric_REBRAND.indd 19 10/30/15 3:05 PM
C20
LViWID M 16 T i H ld C020 C021 M i REBRAND O b 15 2015 9 56 AM
widia.com
P-Style Clamping Toolholders for Negative Inserts
PCBN 75°
order number catalogue number H B F L1 L2 FA
gage
insert shim
shim
pin
punch
pin lever
lever
screw
Torx
Plus
right hand
3878361 PCBNR2020K12 20 20 17,0 125 26,0 3,1 CN..120408 512.112 513.023 515.018 511.023 514.123 15 IP
3878356 PCBNR2525M12 25 25 22,0 150 26,0 3,1 CN..120408 512.112 513.023 515.018 511.023 514.123 15 IP
3878366 PCBNR2525M16 25 25 22,0 150 26,0 4,2 CN..160612 512.117 513.025 515.022 511.025 514.125 15 IP
3878367 PCBNR3225P16 32 25 22,0 170 28,0 4,2 CN..160612 512.117 513.025 515.022 511.025 514.125 15 IP
3878363 PCBNR3232P16 32 32 27,0 170 38,0 4,2 CN..160612 512.117 513.025 515.022 511.025 514.125 15 IP
3878358 PCBNR3232P19 32 32 27,0 170 40,0 4,6 CN..190612 512.123 513.033 515.022 511.033 514.133 25 IP
3878364 PCBNR4040S19 40 40 35,0 250 38,0 4,6 CN..190612 512.123 513.033 515.022 511.033 514.133 25 IP
left hand
3878360 PCBNL2020K12 20 20 17,0 125 26,0 3,1 CN..120408 512.112 513.023 515.018 511.023 514.123 15 IP
3878354 PCBNL2525M12 25 25 22,0 150 26,0 3,1 CN..120408 512.112 513.023 515.018 511.023 514.123 15 IP
3878365 PCBNL2525M16 25 25 22,0 150 26,0 4,2 CN..160612 512.117 513.025 515.022 511.025 514.125 15 IP
3878359 PCBNL3225P16 32 25 22,0 170 28,0 4,2 CN..160612 512.117 513.025 515.022 511.025 514.125 15 IP
3878355 PCBNL3232P16 32 32 27,0 170 38,0 4,2 CN..160612 512.117 513.025 515.022 511.025 514.125 15 IP
3878357 PCBNL3232P19 32 32 27,0 170 40,0 4,6 CN..190612 512.123 513.033 515.022 511.033 514.133 25 IP
3878362 PCBNL4040S19 40 40 35,0 250 38,0 4,6 CN..190612 512.123 513.033 515.022 511.033 514.133 25 IP
Tools for External Turning and Internal Boring
See pages B30–B46
for inserts.
WID_Master16_Turning_Holders_C020_C021_Metric_REBRAND.indd 20 10/30/15 3:05 PM
C21
LViWID M 16 T i H ld C020 C021 M i REBRANDO b 15 20159 56AM
widia.com
P-Style Clamping Toolholders for Negative Inserts
PCKN 75°
order number catalogue number H B F L1 L2 L1A
gage
insert shim
shim
pin
punch
pin lever
lever
screw
Torx
Plus
right hand
3878372 PCKNR2020K12 20 20 25,0 125 23,0 3,1 CN..120408 512.112 513.023 515.018 511.023 514.123 15 IP
3878370 PCKNR2525M12 25 25 32,0 150 23,0 3,1 CN..120408 512.112 513.023 515.018 511.023 514.123 15 IP
3878374 PCKNR2525M16 25 25 32,0 150 30,0 3,8 CN..160612 512.117 513.025 515.022 511.025 514.125 15 IP
3878375 PCKNR3225P16 32 25 32,0 170 30,0 3,8 CN..160612 512.117 513.025 515.022 511.025 514.125 15 IP
3899889 PCKNR3232P16 32 32 40,0 170 38,0 3,8 CN..160612 512.117 513.025 515.022 511.025 514.125 —
3878371 PCKNR3232P19 32 32 40,0 170 40,0 4,6 CN..190612 512.123 513.033 515.022 511.033 514.133 25 IP
3879707 PCKNR4040S19 40 40 50,0 250 36,0 4,6 CN..190612 512.123 513.033 515.022 511.033 514.133 25 IP
left hand
3878373 PCKNL2020K12 20 20 25,0 125 23,0 3,1 CN..120408 512.112 513.023 515.018 511.023 514.123 15 IP
3878369 PCKNL2525M12 25 25 32,0 150 23,0 3,1 CN..120408 512.112 513.023 515.018 511.023 514.123 15 IP
3878377 PCKNL2525M16 25 25 32,0 150 30,0 3,8 CN..160612 512.117 513.025 515.022 511.025 514.125 15 IP
3878376 PCKNL3225P16 32 25 32,0 170 30,0 3,8 CN..160612 512.117 513.025 515.022 511.025 514.125 15 IP
3899888 PCKNL3232P16 32 32 40,0 170 38,0 3,8 CN..160612 512.117 513.025 515.022 511.025 514.125 —
3878368 PCKNL3232P19 32 32 40,0 170 40,0 4,6 CN..190612 512.123 513.033 515.022 511.033 514.133 25 IP
3878378 PCKNL4040S19 40 40 50,0 250 36,0 4,6 CN..190612 512.123 513.033 515.022 511.033 514.133 25 IP
Tools for External Turning and Internal Boring
See pages B30–B46
for inserts.
WID_Master16_Turning_Holders_C020_C021_Metric_REBRAND.indd 21 10/30/15 3:05 PM
C22
LViWID M 16 T i H ld C022 C023 M i REBRAND O b 15 2015 9 56 AM
widia.com
P-Style Clamping Toolholders for Negative Inserts
PCLN 95°
order number catalogue number H B F L1 L2
gage
insert shim
shim
pin
punch
pin lever
lever
screw
lever
screw
wrench
size
right hand
3900154 PCLNR1616H09 16 16 20,0 100 23,0 CN..090308 512.111 513.019 515.018 511.018 514.018 2.5 mm
3878400 PCLNR1616H12 16 16 20,0 100 26,0 CN..120408 512.112 513.023 515.018 511.023 514.123 15 IP
3878422 PCLNR2020K12 20 20 25,0 125 26,0 CN..120408 512.112 513.023 515.018 511.023 514.123 15 IP
3878419 PCLNR2525M12 25 25 32,0 150 26,0 CN..120408 512.112 513.023 515.018 511.023 514.123 15 IP
3878401 PCLNR2525M16 25 25 32,0 150 28,0 CN..160612 512.117 513.025 515.022 511.025 514.125 15 IP
3878402 PCLNR3225P12 32 25 32,0 170 26,0 CN..120408 512.112 513.023 515.018 511.023 514.123 15 IP
3878421 PCLNR3225P16 32 25 32,0 170 38,0 CN..160612 512.117 513.025 515.022 511.025 514.125 15 IP
3878413 PCLNR3225P19 32 25 32,0 170 38,0 CN..190612 512.123 513.033 515.022 511.033 514.133 25 IP
3878396 PCLNR3232P16 32 32 40,0 170 36,0 CN..160612 512.117 513.025 515.022 511.025 514.125 15 IP
3878414 PCLNR3232P19 32 32 40,0 170 36,0 CN..190612 512.123 513.033 515.022 511.033 514.133 25 IP
3878417 PCLNR4040S19 40 40 50,0 250 36,0 CN..190612 512.123 513.033 515.022 511.033 514.133 25 IP
left hand
3900153 PCLNL1616H09 16 16 20,0 100 23,0 CN..090308 512.111 513.019 515.018 511.018 514.018 2.5 mm
3878379 PCLNL1616H12 16 16 20,0 100 26,0 CN..120408 512.112 513.023 515.018 511.023 514.123 15 IP
3878418 PCLNL2020K12 20 20 25,0 125 26,0 CN..120408 512.112 513.023 515.018 511.023 514.123 15 IP
3878398 PCLNL2525M12 25 25 32,0 150 26,0 CN..120408 512.112 513.023 515.018 511.023 514.123 15 IP
3878380 PCLNL2525M16 25 25 32,0 150 28,0 CN..160612 512.117 513.025 515.022 511.025 514.125 15 IP
3878397 PCLNL3225P12 32 25 32,0 170 26,0 CN..120408 512.112 513.023 515.018 511.023 514.123 15 IP
3878381 PCLNL3225P19 32 25 32,0 170 38,0 CN..190612 512.123 513.033 515.022 511.033 514.133 25 IP
3878415 PCLNL3232P16 32 32 40,0 170 36,0 CN..160612 512.117 513.025 515.022 511.025 514.125 15 IP
3878393 PCLNL3232P19 32 32 40,0 170 36,0 CN..190612 512.123 513.033 515.022 511.033 514.133 25 IP
3878416 PCLNL4040S19 40 40 50,0 250 36,0 CN..190612 512.123 513.033 515.022 511.033 514.133 25 IP
Tools for External Turning and Internal Boring
See pages B30–B46
for inserts.
WID_Master16_Turning_Holders_C022_C023_Metric_REBRAND.indd 22 10/30/15 3:05 PM
C23
LViWID M 16 T i H ld C022 C023 M i REBRANDO b 15 20159 56AM
widia.com
P-Style Clamping Toolholders for Negative Inserts
PDJN 93°
order number catalogue number H B F L1 L2 hS°
gage
insert shim
shim
pin
punch
pin lever
lever
screw
Torx
Plus
right hand
3878424 PDJNR1616H11 16 16 20,0 100 22,0 -6.0 DN..110408 512.060 513.060 515.018 511.060 514.118 10 IP
3878429 PDJNR2020K11 20 20 25,0 125 30,0 -7.0 DN..110408 512.060 513.060 515.018 511.060 514.118 10 IP
3879318 PDJNR2020K15 20 20 25,0 125 36,0 -7.0 DN..150608 512.153 513.023 515.018 511.024 514.128 15 IP
3879151 PDJNR2525M11 25 25 32,0 150 30,0 -7.0 DN..110408 512.060 513.060 515.018 511.060 514.118 10 IP
3878425 PDJNR3225P15 32 25 32,0 170 38,0 -7.0 DN..150608 512.153 513.023 515.018 511.024 514.128 15 IP
3879152 PDJNR3232P15 32 32 40,0 170 38,0 -7.0 DN..150608 512.153 513.023 515.018 511.024 514.128 15 IP
3878426 PDJNR4025R15 40 25 32,0 200 38,0 -7.0 DN..150608 512.153 513.023 515.018 511.024 514.128 15 IP
left hand
3879313 PDJNL1616H11 16 16 20,0 100 22,0 -6.0 DN..110408 512.060 513.060 515.018 511.060 514.118 10 IP
3878427 PDJNL2020K11 20 20 25,0 125 30,0 -7.0 DN..110408 512.060 513.060 515.018 511.060 514.118 10 IP
3879317 PDJNL2020K15 20 20 25,0 125 36,0 -7.0 DN..150608 512.153 513.023 515.018 511.024 514.128 15 IP
3878428 PDJNL2525M11 25 25 32,0 150 30,0 -7.0 DN..110408 512.060 513.060 515.018 511.060 514.118 10 IP
3879314 PDJNL2525M15 25 25 32,0 150 — -7.0 DN..150608 512.153 513.023 515.018 511.024 514.128 15IP
3878423 PDJNL3225P15 32 25 32,0 170 38,0 -7.0 DN..150608 512.153 513.023 515.018 511.024 514.128 15 IP
3879315 PDJNL3232P15 32 32 40,0 170 38,0 -7.0 DN..150608 512.153 513.023 515.018 511.024 514.128 15 IP
3879316 PDJNL4025R15 40 25 32,0 200 38,0 -7.0 DN..150608 512.153 513.023 515.018 511.024 514.128 15 IP
Tools for External Turning and Internal Boring
See pages B47–B64
for inserts.
WID_Master16_Turning_Holders_C022_C023_Metric_REBRAND.indd 23 10/30/15 3:05 PM
C24
LViWID M 16 T i H ld C024 C025 M i REBRAND O b 15 2015 9 56 AM
widia.com
P-Style Clamping Toolholders for Negative Inserts
PDNN 62,5°
order number catalogue number H B F L1 L2
gage
insert shim
shim
pin
punch
pin lever
lever
screw
Torx
Plus
right hand
3879319 PDNNR2525M15 25 25 12,5 150 36,0 DN..150608 512.153 513.023 515.018 511.024 514.128 15 IP
3900156 PDNNR3225P15 32 25 12,5 170 36,0 DN..150608 512.153 513.023 515.018 511.024 514.128 15 IP
3879322 PDNNR4025M15 40 25 12,5 150 36,0 DN..150608 512.153 513.023 515.018 511.024 514.128 15 IP
left hand
3879320 PDNNL2525M15 25 25 12,5 150 36,0 DN..150608 512.153 513.023 515.018 511.024 514.128 15 IP
3900155 PDNNL3225P15 32 25 12,5 170 36,0 DN..150608 512.153 513.023 515.018 511.024 514.128 15 IP
Tools for External Turning and Internal Boring
See pages B47–B64
for inserts.
WID_Master16_Turning_Holders_C024_C025_Metric_REBRAND.indd 24 10/30/15 3:05 PM
C25
LViWID M 16 T i H ld C024 C025 M i REBRANDO b 15 20159 56AM
widia.com
P-Style Clamping Toolholders for Negative Inserts
PSBN 75°
order number catalogue number H B F L1 L2 FA
gage
insert shim
shim
pin
punch
pin lever
lever
screw
Torx
Plus
right hand
3879324 PSBNR2020K12 20 20 17,0 125 26,0 3,1 SN..120408 512.063 513.023 515.018 511.023 514.123 15 IP
3900158 PSBNR2525M12 25 25 22,0 150 26,0 — SN..120408 512.063 513.023 515.018 511.023 514.123 15 IP
3879333 PSBNR2525M15 25 25 22,0 150 36,0 3,8 SN..150612 512.025 513.025 515.022 511.025 514.125 15 IP
3879330 PSBNR3232P15 32 32 27,0 170 33,0 3,8 SN..150612 512.025 513.025 515.022 511.025 514.125 15 IP
3879327 PSBNR3232P19 32 32 27,0 170 40,0 4,6 SN..190612 512.083 513.033 515.022 511.033 514.133 25 IP
3879334 PSBNR4040S19 40 40 35,0 250 38,0 4,6 SN..190612 512.083 513.033 515.022 511.033 514.133 25 IP
3879331 PSBNR4040S25 40 40 35,0 250 47,0 5,9 SN..250724 512.092 513.038 515.028 511.038 514.138 30 IP
left hand
3879325 PSBNL2020K12 20 20 17,0 125 26,0 3,1 SN..120408 512.063 513.023 515.018 511.023 514.123 15 IP
3900157 PSBNL2525M12 25 25 22,0 150 26,0 — SN..120408 512.063 513.023 515.018 511.023 514.123 15 IP
3879329 PSBNL2525M15 25 25 22,0 150 36,0 3,8 SN..150612 512.025 513.025 515.022 511.025 514.125 15 IP
3879332 PSBNL3232P15 32 32 27,0 170 33,0 3,8 SN..150612 512.025 513.025 515.022 511.025 514.125 15 IP
3879328 PSBNL3232P19 32 32 27,0 170 40,0 4,6 SN..190612 512.083 513.033 515.022 511.033 514.133 25 IP
3879323 PSBNL4040S19 40 40 35,0 250 38,0 4,6 SN..190612 512.083 513.033 515.022 511.033 514.133 25 IP
3879326 PSBNL4040S25 40 40 35,0 250 47,0 5,9 SN..250724 512.092 513.038 515.028 511.038 514.138 30 IP
3900159 PSBNL5050T25 50 50 43,0 300 50,0 — SN..250724 512.092 513.038 515.028 511.038 514.138 30 IP
Tools for External Turning and Internal Boring
See pages B68–B80
for inserts.
WID_Master16_Turning_Holders_C024_C025_Metric_REBRAND.indd 25 10/30/15 3:05 PM
C26
LViWID M 16 T i H ld C026 C027 M i REBRAND O b 15 2015 9 57 AM
widia.com
PSKN 75°
order number catalogue number H B F L1 L2 L1A
gage
insert shim
shim
pin
punch
pin lever
lever
screw
Torx
Plus
right hand
3879340 PSKNR2020K12 20 20 25,0 125 23,0 3,1 SN..120408 512.063 513.023 515.018 511.023 514.123 15 IP
3879341 PSKNR2525M12 25 25 32,0 150 23,0 3,1 SN..120408 512.063 513.023 515.018 511.023 514.123 15 IP
3879708 PSKNR2525M15 25 25 32,0 150 32,0 3,8 SN..150612 512.025 513.025 515.022 511.025 514.125 15 IP
3879342 PSKNR3232P19 32 32 40,0 170 37,5 4,6 SN..190612 512.083 513.033 515.022 511.033 514.133 25 IP
3879710 PSKNR4040S19 40 40 50,0 250 37,5 4,6 SN..190612 512.083 513.033 515.022 511.033 514.133 25 IP
left hand
3879709 PSKNL1616H09 16 16 20,0 100 20,0 2,2 SN..090308 512.053 513.019 515.018 511.018 514.118 10 IP
3879343 PSKNL2020K12 20 20 25,0 125 23,0 3,1 SN..120408 512.063 513.023 515.018 511.023 514.123 15 IP
3879339 PSKNL2525M12 25 25 32,0 150 23,0 3,1 SN..120408 512.063 513.023 515.018 511.023 514.123 15 IP
3879344 PSKNL3232P19 32 32 40,0 170 37,5 4,6 SN..190612 512.083 513.033 515.022 511.033 514.133 25 IP
3879345 PSKNL4040S19 40 40 50,0 250 37,5 4,6 SN..190612 512.083 513.033 515.022 511.033 514.133 25 IP
P-Style Clamping Toolholders for Negative Inserts
PSDN 45°
order number catalogue number H B F L1 L2
gage
insert shim
shim
pin
punch
pin lever
lever
screw
Torx
Plus
3879336 PSDNN1616H09 16 16 8,0 100 20,0 SN..090308 512.053 513.019 515.018 511.018 514.118 10 IP
3879335 PSDNN2020K12 20 20 10,0 125 26,0 SN..120408 512.063 513.023 515.018 511.023 514.123 15 IP
3879337 PSDNN2525M12 25 25 12,5 150 26,0 SN..120408 512.063 513.023 515.018 511.023 514.123 15 IP
3900160 PSDNN3225P15 32 25 12,5 170 33,0 SN..150612 512.025 513.025 515.022 511.025 514.125 15 IP
3900161 PSDNN3232P15 32 32 16,0 170 33,0 SN..150612 512.025 513.025 515.022 511.025 514.125 15 IP
3879338 PSDNN4040S25 40 40 20,0 250 47,0 SN..250724 512.092 513.038 515.028 511.038 514.138 30 IP
Tools for External Turning and Internal Boring
See pages B68–B80
for inserts.
See pages B68–B80
for inserts.
WID_Master16_Turning_Holders_C026_C027_Metric_REBRAND.indd 26 10/30/15 3:06 PM
C27
LViWID M 16 T i H ld C026 C027 M i REBRANDO b 15 20159 57AM
widia.com
P-Style Clamping Toolholders for Negative Inserts
PSSN 45°
order number catalogue number H B F L1 L2 FA L1A
gage
insert shim
shim
pin
punch
pin lever
lever
screw
Torx
Plus
right hand
3879351 PSSNR1616H09 16 16 20,0 100 23,0 6,1 6,1 SN..090308 512.053 513.019 515.018 511.018 514.118 10 IP
3879359 PSSNR2020K09 20 20 25,0 125 26,0 6,1 6,1 SN..090308 512.053 513.019 515.018 511.018 514.118 10 IP
3879348 PSSNR2020K12 20 20 25,0 125 28,0 8,3 8,3 SN..120408 512.063 513.023 515.018 511.023 514.123 15 IP
3879352 PSSNR2525M12 25 25 32,0 150 28,0 8,3 8,3 SN..120408 512.063 513.023 515.018 511.023 514.123 15 IP
3879349 PSSNR2525M15 25 25 32,0 150 32,0 10,2 10,2 SN..150612 512.025 513.025 515.022 511.025 514.125 15 IP
3879360 PSSNR3225P12 32 25 32,0 170 29,0 8,3 8,3 SN..120408 512.063 513.023 515.018 511.023 514.123 15 IP
3879362 PSSNR3225P15 32 25 32,0 170 32,0 10,2 10,2 SN..150612 512.025 513.025 515.022 511.025 514.125 15 IP
3879354 PSSNR3232P15 32 32 40,0 170 32,0 10,0 11,5 SN..150612 512.025 513.025 515.022 511.025 514.125 15 IP
3879350 PSSNR3232P19 32 32 40,0 170 37,5 12,5 12,5 SN..190612 512.083 513.033 515.022 511.033 514.133 25 IP
3879361 PSSNR4040S19 40 40 50,0 250 37,5 12,5 12,5 SN..190612 512.083 513.033 515.022 511.033 514.133 25 IP
left hand
3879363 PSSNL1616H09 16 16 20,0 100 23,0 6,1 6,1 SN..090308 512.053 513.019 515.018 511.018 514.118 10 IP
3879844 PSSNL2020K09 20 20 25,0 125 26,0 6,1 6,1 SN..090308 512.053 513.019 515.018 511.018 514.118 10 IP
3879347 PSSNL2020K12 20 20 25,0 125 28,0 8,3 8,3 SN..120408 512.063 513.023 515.018 511.023 514.123 15 IP
3879353 PSSNL2525M12 25 25 32,0 150 28,0 8,3 8,3 SN..120408 512.063 513.023 515.018 511.023 514.123 15 IP
3879355 PSSNL2525M15 25 25 32,0 150 32,0 10,2 10,2 SN..150612 512.025 513.025 515.022 511.025 514.125 15 IP
3879358 PSSNL3225P12 32 25 32,0 170 29,0 8,3 8,3 SN..120408 512.063 513.023 515.018 511.023 — 15 IP
3879843 PSSNL3225P15 32 25 32,0 170 32,0 10,2 10,2 SN..150612 512.025 513.025 515.022 511.025 514.125 15 IP
3879712 PSSNL3232P15 32 32 40,0 170 32,0 10,2 10,2 SN..150612 512.025 513.025 515.022 511.025 514.125 15 IP
3879356 PSSNL3232P19 32 32 40,0 170 37,5 12,5 12,5 SN..190612 512.083 513.033 515.022 511.033 514.133 25 IP
3879357 PSSNL4040S19 40 40 50,0 250 37,5 12,5 12,5 SN..190612 512.083 513.033 515.022 511.033 514.133 25 IP
3879711 PSSNL4040S25 40 40 50,0 250 50,0 16,0 16,0 SN..250724 512.092 513.038 515.028 511.038 514.138 30 IP
Tools for External Turning and Internal Boring
See pages B68–B80
for inserts.
WID_Master16_Turning_Holders_C026_C027_Metric_REBRAND.indd 27 10/30/15 3:06 PM
C28
LViWID M 16 T i H ld C028 C029 M i REBRAND O b 15 2015 9 57 AM
widia.com
P-Style Clamping Toolholders for Negative Inserts
PTFN 90°
order number catalogue number H B F L1 L2
gage
insert shim
shim
pin
punch
pin lever
lever
screw
Torx
Plus
right hand
3879369 PTFNR1616H16 16 16 20,0 100 20,0 TN..160408 512.013 513.018 515.018 511.018 514.118 10 IP
3879367 PTFNR2020K16 20 20 25,0 125 20,0 TN..160408 512.013 513.018 515.018 511.018 514.118 10 IP
3879364 PTFNR2525M16 25 25 32,0 150 20,0 TN..160408 512.013 513.018 515.018 511.018 514.118 10 IP
3879372 PTFNR2525M22 25 25 32,0 150 26,0 TN..220408 512.023 513.023 515.018 511.023 514.123 15 IP
3879370 PTFNR3225P22 32 25 32,0 170 26,0 TN..220408 512.023 513.023 515.018 511.023 514.123 15 IP
3879845 PTFNR3232P22 32 32 40,0 170 26,0 TN..220408 512.023 513.023 515.018 511.023 514.123 15 IP
left hand
3879365 PTFNL1616H16 16 16 20,0 100 20,0 TN..160408 512.013 513.018 515.018 511.018 514.118 10 IP
3879366 PTFNL2020K16 20 20 25,0 125 20,0 TN..160408 512.013 513.018 515.018 511.018 514.118 10 IP
3879368 PTFNL2525M16 25 25 32,0 150 20,0 TN..160408 512.013 513.018 515.018 511.018 514.118 10 IP
Tools for External Turning and Internal Boring
See pages B81–B93
for inserts.
WID_Master16_Turning_Holders_C028_C029_Metric_REBRAND.indd 28 10/30/15 3:06 PM
C29
LViWID M 16 T i H ld C028 C029 M i REBRANDO b 15 20159 57AM
widia.com
P-Style Clamping Toolholders for Negative Inserts
PTGN 90°
order number catalogue number H B F L1 L2
gage
insert shim
shim
pin
punch
pin lever
lever
screw
Torx
Plus
right hand
3879385 PTGNR1616H16 16 16 20,0 100 20,0 TN..160408 512.013 513.018 515.018 511.018 514.118 10 IP
3879389 PTGNR2020K16 20 20 25,0 125 20,0 TN..160408 512.013 513.018 515.018 511.018 514.118 10 IP
3879390 PTGNR2525M16 25 25 32,0 150 20,0 TN..160408 512.013 513.018 515.018 511.018 514.118 10 IP
3879387 PTGNR2525M22 25 25 32,0 150 26,0 TN..220408 512.023 513.023 515.018 511.023 514.123 15 IP
3879846 PTGNR3225P22 32 25 32,0 170 28,0 TN..220408 512.023 513.023 515.018 511.023 514.123 15 IP
3879391 PTGNR3232P22 32 32 40,0 170 26,0 TN..220408 512.023 513.023 515.018 511.023 514.123 15 IP
3900163 PTGNR4040T27 40 40 50,0 300 31,0 TN..270612 512.031 513.025 515.022 511.028 514.128 15 IP
left hand
3879383 PTGNL1616H16 16 16 20,0 100 20,0 TN..160408 512.013 513.018 515.018 511.018 514.118 10 IP
3879384 PTGNL2020K16 20 20 25,0 125 20,0 TN..160408 512.013 513.018 515.018 511.018 514.118 10 IP
3879388 PTGNL2525M16 25 25 32,0 150 20,0 TN..160408 512.013 513.018 515.018 511.018 514.118 10 IP
3879386 PTGNL2525M22 25 25 32,0 150 26,0 TN..220408 512.023 513.023 515.018 511.023 514.123 15 IP
3879392 PTGNL3232P22 32 32 40,0 170 26,0 TN..220408 512.023 513.023 515.018 511.023 514.123 15 IP
3900162 PTGNL4040T27 40 40 50,0 300 31,0 TN..270612 512.031 513.025 515.022 511.028 514.128 15 IP
Tools for External Turning and Internal Boring
See pages B81–B93
for inserts.
WID_Master16_Turning_Holders_C028_C029_Metric_REBRAND.indd 29 10/30/15 3:06 PM
C30
LViWID M 16 T i H ld C030 C031 M i REBRAND O b 15 2015 9 57 AM
widia.com
P-Style Clamping Toolholders for Negative Inserts
PWLN 95°
order number catalogue number H B F L1 L2
gage
insert shim
shim
pin
punch
pin lever
lever
screw
Torx
Plus
right hand
3879405 PWLNR1616H06 16 16 20,0 100 14,0 WN..060408 512.134 513.018 515.018 511.018 514.118 10 IP
3879407 PWLNR2020K06 20 20 25,0 125 14,0 WN..060408 512.134 513.018 515.018 511.018 514.118 10 IP
3879408 PWLNR2020K08 20 20 25,0 125 20,0 WN..080408 512.135 513.023 515.018 511.023 514.123 15 IP
3900167 PWLNR2525M06 25 25 32,0 150 20,0 WN..060408 512.134 513.018 515.018 511.018 514.118 10 IP
3879409 PWLNR2525M08 25 25 32,0 150 26,0 WN..080408 512.135 513.023 515.018 511.023 514.123 15 IP
3900164 PWLNR3232P08 32 32 40,0 170 26,0 WN..080408 512.135 513.023 515.018 511.023 514.123 15 IP
left hand
3879410 PWLNL1616H06 16 16 20,0 100 14,0 WN..060408 512.134 513.018 515.018 511.018 514.118 10 IP
3879406 PWLNL2020K06 20 20 25,0 125 14,0 WN..060408 512.134 513.018 515.018 511.018 514.118 10 IP
3879403 PWLNL2020K08 20 20 25,0 125 20,0 WN..080408 512.135 513.023 515.018 511.023 514.123 15 IP
3900166 PWLNL2525M06 25 25 32,0 150 20,0 WN..060408 512.134 513.018 515.018 511.018 514.118 10 IP
3879404 PWLNL2525M08 25 25 32,0 150 26,0 WN..080408 512.135 513.023 515.018 511.023 514.123 15 IP
3900165 PWLNL3232P08 32 32 40,0 170 26,0 WN..080408 512.135 513.023 515.018 511.023 514.123 15 IP
Tools for External Turning and Internal Boring
See pages B99–B105
for inserts.
WID_Master16_Turning_Holders_C030_C031_Metric_REBRAND.indd 30 10/30/15 3:06 PM
C31
LViWID M 16 T i H ld C030 C031 M i REBRANDO b 15 20159 57AM
widia.com
C-Style Clamping Toolholders for Negative Inserts
CCLN-MX 95°
NOTE: MX — clamping version is shown.
order number catalogue number H B F L1 L2
gage
insert shim
shim
screw hex
clamp
assembly hex
right hand
3032691 CCLNR2525M12MX7 25 25 32,0 150 32,0 CN.X120708 552.221 554.252 2.5 mm 551.316 4 mm
3032713 CCLNR3225P12MX7 32 25 32,0 170 32,0 CN.X120708 552.221 554.252 2.5 mm 551.316 4 mm
left hand
3032692 CCLNL2525M12MX7 25 25 32,0 150 32,0 CN.X120708 552.221 554.252 2.5 mm 551.316 4 mm
CCLN-MN 95°
NOTE: MX — clamping version is shown.
order number catalogue number H B F L1 L2
gage
insert shim
shim
screw hex
thrust
plate
clamp
assembly hex
right hand
3032715 CCLNR2525M12MN4 25 25 32,0 150 32,0 CN.N120408 552.220 554.252 2.5 mm 557.111 551.317 4 mm
3032717 CCLNR2525M12MN7 25 25 32,0 150 32,0 CN.N120708 552.221 554.252 2.5 mm 557.111 551.317 4 mm
3032719 CCLNR3225P12MN7 32 25 32,0 170 32,0 CN.N120708 552.221 554.252 2.5 mm — 551.317 4 mm
left hand
3032716 CCLNL2525M12MN4 25 25 32,0 150 32,0 CN.N120408 552.220 554.252 2.5 mm 557.111 551.317 4 mm
Tools for External Turning and Internal Boring
See pages B177–B179 and
B197–B205 for inserts.
See pages B177–B179 and
B197–B205 for inserts.
WID_Master16_Turning_Holders_C030_C031_Metric_REBRAND.indd 31 10/30/15 3:06 PM
C32
LViWID M 16 T i H ld C032 C033 M i REBRAND O b 15 2015 9 57 AM
widia.com
C-Style Clamping Toolholders for Negative Inserts
CCLN-MF 95°
NOTE: MX — clamping version is shown.
order number catalogue number H B F L1 L2
gage
insert shim
shim
screw hex chipbreaker
clamp
assembly hex
right hand
3032723 CCLNR2525M12MF7 25 25 32,0 150 32,0 CN.N120708 552.221 554.252 2.5 mm 557.125 551.317 4 mm
CDJN-MX 93°
NOTE: MX — clamping version is shown.
order number catalogue number H B F L1 L2
gage
insert shim
shim
screw hex
clamp
assembly hex
right hand
3032726 CDJNR2525M15MX7 25 25 32,0 150 38,0 DN.X150708 552.228 554.252 2.5 mm 551.332 4 mm
left hand
3032727 CDJNL2525M15MX7 25 25 32,0 150 38,0 DN.X150708 552.228 554.252 2.5 mm 551.332 4 mm
Tools for External Turning and Internal Boring
See pages B177–B179 and
B197–B205 for inserts.
See pages B180–B181 and
B206–B216 for inserts.
WID_Master16_Turning_Holders_C032_C033_Metric_REBRAND.indd 32 10/30/15 3:06 PM
C33
LViWID M 16 T i H ld C032 C033 M i REBRANDO b 15 20159 57AM
widia.com
C-Style Clamping Toolholders for Negative Inserts
CDJN-MN 93°
NOTE: MX — clamping version is shown.
order number catalogue number H B F L1 L2
gage
insert shim
shim
screw hex
thrust
plate
clamp
assembly hex
right hand
3032728 CDJNR2525M15MN7 25 25 32,0 150 38,0 DN.N150708 552.228 554.252 2.5 mm 557.111 551.317 4 mm
3032545 CDJNR3225P15MN7 32 25 32,0 170 38,0 DN.N150708 552.228 554.252 2.5 mm 557.111 551.317 4 mm
left hand
3032544 CDJNL2525M15MN7 25 25 32,0 150 38,0 DN.N150708 552.228 554.252 2.5 mm 557.111 551.317 4 mm
3032546 CDJNL3225P15MN7 32 25 32,0 170 38,0 DN.N150708 552.228 554.252 2.5 mm 557.111 551.317 4 mm
CELN-MF 97,5°
NOTE: MN — clamping version is shown.
order number catalogue number H B F L1 L2
gage
insert shim
shim
screw hex chipbreaker
clamp
assembly hex
right hand
3879700 CELNR2525M13MF7 25 25 32,5 153 32,0 EN.N130708 552.240 554.252 2.5 mm 557.125 551.317 4 mm
left hand
3879698 CELNL2525M13MF7 25 25 32,5 153 32,0 EN.N130708 552.240 554.252 2.5 mm 557.125 551.317 4 mm
Tools for External Turning and Internal Boring
See pages B180–B181 and
B206–B216 for inserts.
See page B182 for inserts.
WID_Master16_Turning_Holders_C032_C033_Metric_REBRAND.indd 33 10/30/15 3:06 PM
C34
LViWID M 16 T i H ld C034 C035 M i REBRAND O b 15 2015 9 58 AM
widia.com
C-Style Clamping Toolholders for Negative Inserts
CELN-MN 97,5°
NOTE: MN — clamping version is shown.
order number catalogue number H B F L1 L2
gage
insert shim
shim
screw hex
thrust
plate
clamp
assembly hex
right hand
3879701 CELNR2525M13MN7 25 25 32,5 153 32,0 EN.N130708 552.240 554.252 2.5 mm 557.111 551.317 4 mm
left hand
3879699 CELNL2525M13MN7 25 25 32,5 153 32,0 EN.N130708 552.240 554.252 2.5 mm 557.111 551.317 4 mm
H = H1
CKJN
order number catalogue number H B F L1 L2 hS° aO°
gage
insert shim
shim
pin clamp
clamp
assembly hex
hex
wrench pin
right hand
3870064 CKJNR2525M16 25 25 32,0 150 36,0 0.0 -6.0 KN..160410R 512.100 513.020 551.129 — 4 mm 170.004 513.123
3870065 CKJNR3225P16 32 25 32,0 170 33,0 0.0 -6.0 KN..160410R 512.100 513.020 551.129 — 4 mm 170.004 513.123
left hand
3870042 CKJNL2525M16 25 25 32,0 150 36,0 0.0 -6.0 KN..160410L 512.101 513.020 — 551.130 4 mm 170.004 513.123
3870063 CKJNL3225P16 32 25 32,0 170 33,0 0.0 -6.0 KN..160410L 512.101 513.020 — 551.130 4 mm 170.004 513.123
Tools for External Turning and Internal Boring
See page B182 for inserts.
WID_Master16_Turning_Holders_C034_C035_Metric_REBRAND.indd 34 10/30/15 3:06 PM
C35
LViWID M 16 T i H ld C034 C035 M i REBRANDO b 15 20159 58AM
widia.com
C-Style Clamping Toolholders for Negative Inserts
CRDN-MN
NOTE: MN — clamping version is shown.
order number catalogue number H B F L1 L2
gage
insert shim
shim
screw hex
thrust
plate
clamp
assembly hex
3032549 CRDNN2525M12MN4 25 25 12,5 150 30,0 RN.N120400 552.229 554.252 2.5 mm 557.111 551.333 4 mm
3032551 CRDNN2525M12MN7 25 25 12,5 150 30,0 RN.N120700 552.230 554.252 2.5 mm 557.111 551.333 4 mm
3032550 CRDNN3225P12MN4 32 25 12,5 170 30,0 RN.N120400 552.229 554.252 2.5 mm 557.111 551.333 4 mm
3032552 CRDNN3225P12MN7 32 25 12,5 170 30,0 RN.N120700 552.230 554.252 2.5 mm 557.111 551.333 4 mm
CRSN-MN
NOTE: MN — clamping version is shown.
order number catalogue number H B F L1 L2
gage
insert shim
shim
screw hex
thrust
plate
clamp
assembly hex
right hand
3032677 CRSNR2525M12MN7 25 25 32,0 150 26,0 RN.N120700 552.230 554.252 2.5 mm 557.111 551.333 4 mm
3032675 CRSNR3225P12MN4 32 25 32,0 170 26,0 RN.N120400 552.229 554.252 2.5 mm 557.111 551.333 4 mm
3032679 CRSNR3225P12MN7 32 25 32,0 170 26,0 RN.N120700 552.230 554.252 2.5 mm 557.111 551.333 4 mm
left hand
3032678 CRSNL2525M12MN7 25 25 32,0 150 26,0 RN.N120700 552.230 554.252 2.5 mm 557.111 551.333 4 mm
3032676 CRSNL3225P12MN4 32 25 32,0 170 26,0 RN.N120400 552.229 554.252 2.5 mm 557.111 551.333 4 mm
3032680 CRSNL3225P12MN7 32 25 32,0 170 26,0 RN.N120700 552.230 554.252 2.5 mm 557.111 551.333 4 mm
Tools for External Turning and Internal Boring
See pages B183–B185
and B210 for inserts.
See pages B183–B185
and B210 for inserts.
WID_Master16_Turning_Holders_C034_C035_Metric_REBRAND.indd 35 10/30/15 3:06 PM
C36
LViWID M 16 T i H ld C036 C037 M i REBRAND O b 15 2015 9 58 AM
widia.com
C-Style Clamping Toolholders for Positive Inserts
CSBP 75°
order number catalogue number H B F L1 L2 FA
gage
insert shim
shim
screw hex clamp
clamp
screw hex
right hand
3870068 CSBPR2020K12 20 20 17,0 125 30,0 3,1 SP..120308 SM840 MS111 2 mm CKM10 STCM8 4 mm
3870069 CSBPR2525M12 25 25 22,0 150 30,0 3,1 SP..120308 SM840 MS111 2 mm CKM10 STCM8 4 mm
left hand
3870066 CSBPL2020K12 20 20 17,0 125 30,0 3,1 SP..120308 SM840 MS111 2 mm CKM10 STCM8 4 mm
CSDP 45°
order number catalogue number H B F L1 L2
gage
insert shim
shim
screw hex clamp
clamp
screw hex
3870070 CSDPN1616H09 16 16 8,0 100 25,0 SP..090308 SM820 MS959 —CKM7 STCM9 2.5 mm
3870071 CSDPN2020K12 20 20 10,0 125 32,0 SP..120308 SM840 MS111 2 mm CKM10 STCM8 4 mm
3870072 CSDPN2525M12 25 25 12,5 150 32,0 SP..120308 SM840 MS111 2 mm CKM9 STCM4 4 mm
Tools for External Turning and Internal Boring
See pages B186–B191 and
B211–B212 for inserts.
See pages B186–B191 and
B211–B212 for inserts.
WID_Master16_Turning_Holders_C036_C037_Metric_REBRAND.indd 36 10/30/15 3:06 PM
C37
LViWID M 16 T i H ld C036 C037 M i REBRANDO b 15 20159 58AM
widia.com
C-Style Clamping Toolholders for Positive Inserts
CSSP 45°
order number catalogue number H B F L1 L2 FA L1A
gage
insert shim
shim
screw hex clamp
clamp
screw hex
right hand
3870074 CSSPR2020K12 20 20 25,0 125 32,0 8,7 8,3 SP..120308 SM840 MS111 2 mm CKM10 STCM8 4 mm
3870075 CSSPR2525M12 25 25 32,0 150 32,0 8,7 8,3 SP..120308 SM840 MS111 2 mm CKM9 STCM4 4 mm
left hand
3870073 CSSPL2525M12 25 25 32,0 150 32,0 8,7 8,3 SP..120308 SM840 MS111 2 mm CKM9 STCM4 4 mm
CTCP 90°
order number catalogue number H B F L1 L2
gage
insert shim
shim
screw hex clamp
clamp
screw hex
3870080 CTCPN4018R22 40 18 19,2 200 41,0 TP..220408 SM837 MS125 2.5 mm CKM13 STCM4 4 mm
3870076 CTCPN2510M11 25 10 10,0 150 26,0 TP..110304 SM819 MS960 —CKM7 STCM5 2.5 mm
3870077 CTCPN2514M16 25 14 14,4 150 28,0 TP..160308 SM841 MS111 2 mm CKM13 STCM4 4 mm
3870078 CTCPN2518M22 25 18 19,2 150 41,0 TP..220408 SM837 MS125 2.5 mm CKM13 STCM4 4 mm
3870079 CTCPN2520M22 25 20 20,2 150 41,0 TP..220408 SM837 MS125 2.5 mm CKM13 STCM4 4 mm
Tools for External Turning and Internal Boring
See pages B186–B191 and
B211–B212 for inserts.
See pages B192–B194 and
B212–B216 for inserts.
WID_Master16_Turning_Holders_C036_C037_Metric_REBRAND.indd 37 10/30/15 3:06 PM
C38
LViWID M 16 T i H ld C038 C039 M i REBRAND O b 15 2015 9 58 AM
widia.com
C-Style Clamping Toolholders for Positive Inserts
CTDP 45°
order number catalogue number H B F L1 L2
gage
insert shim
shim
screw clamp
clamp
screw hex
right hand
3870083 CTDPR1212F11 12 12 6,0 80 22,0 TP..110304 SM819 MS960 CKM19 STCM9 2.5 mm
left hand
3870082 CTDPL1212F11 12 12 6,0 80 22,0 TP..110304 SM819 MS960 CKM19 STCM9 2.5 mm
CTFP 90°
order number catalogue number H B F L1 L2
gage
insert shim
shim
screw hex clamp
clamp
screw hex
right hand
3870087 CTFPR2020K16 20 20 25,0 125 29,0 TP..160308 SM841 MS111 2 mm CKM10 STCM8 4 mm
3870088 CTFPR2525M16 25 25 32,0 150 29,0 TP..160308 SM841 MS111 2 mm CKM9 STCM4 4 mm
left hand
3870086 CTFPL2525M16 25 25 32,0 150 29,0 TP..160308 SM841 MS111 2 mm CKM9 STCM4 4 mm
Tools for External Turning and Internal Boring
See pages B192–B194 and
B212–B216 for inserts.
See pages B192–B194 and
B212–B216 for inserts.
WID_Master16_Turning_Holders_C038_C039_Metric_REBRAND.indd 38 10/30/15 3:06 PM
C39
LViWID M 16 T i H ld C038 C039 M i REBRANDO b 15 20159 58AM
widia.com
C-Style Clamping Toolholders for Positive Inserts
CTGP 90°
order number catalogue number H B F L1 L2
gage
insert shim
shim
screw hex clamp
clamp
screw hex
right hand
3870092 CTGPR1212F11 12 12 16,0 80 20,0 TP..110304 SM819 MS960 —CKM19 STCM9 2.5 mm
3870103 CTGPR1616H11 16 16 20,0 100 20,0 TP..110304 SM819 MS960 —CKM19 STCM9 2.5 mm
3870104 CTGPR2020K11 20 20 25,0 125 20,0 TP..110304 SM819 MS960 —CKM19 STCM9 2.5 mm
3870105 CTGPR2020K16 20 20 25,0 125 26,0 TP..160308 SM841 MS111 2 mm CKM10 STCM8 4 mm
3870106 CTGPR2525M16 25 25 32,0 150 26,0 TP..160308 SM841 MS111 2 mm CKM9 STCM4 4 mm
3870107 CTGPR2525M22 25 25 32,0 150 30,0 TP..220408 SM837 MS125 2.5 mm CKM9 STCM4 4 mm
left hand
3870089 CTGPL1212F11 12 12 16,0 80 20,0 TP..110304 SM819 MS960 —CKM19 STCM9 2.5 mm
3870090 CTGPL2020K16 20 20 25,0 125 26,0 TP..160308 SM841 MS111 2 mm CKM10 STCM8 4 mm
3870091 CTGPL2525M16 25 25 32,0 150 26,0 TP..160308 SM841 MS111 2 mm CKM9 STCM4 4 mm
Tools for External Turning and Internal Boring
See pages B192–B194 and
B212–B216 for inserts.
WID_Master16_Turning_Holders_C038_C039_Metric_REBRAND.indd 39 10/30/15 3:06 PM
C40
LViWID M 16 T i H ld C040 C041 M i REBRAND O b 15 2015 9 58 AM
widia.com
C-Style Clamping Toolholders for Positive Inserts
CRDP
NOTE: CRDP toolholders are able to use RPGX and RCGX insert styles.
order number catalogue number H B F L1 L2 H3 CD
gage
insert nest clamp
clamp
screw hex
3871510 CRDPN2525M06V 25 25 12,5 151 — — 19,0 R..X060400E NST1 CM214 MS1321 2.5 mm
3871512 CRDPN3232P09V 32 32 16,0 171 — — 29,0 R..X090700E NST2 CM219 CS412 9/64
3871511 CRDPN2525M09V 25 25 12,5 151 — — 29,0 R..X090700E NST2 CM219 CS412 9/64
3871514 CRDPN3232P12V 32 32 16,0 171 — — 38,0 R..X120700E NST3 CM216 CS412 9/64
3871513 CRDPN2525M12V 25 25 12,5 151 38,1 6,4 38,0 R..X120700E NST3 CM216 CS412 9/64
Tools for External Turning and Internal Boring
See page B184 for inserts.
WID_Master16_Turning_Holders_C040_C041_Metric_REBRAND.indd 40 10/30/15 3:06 PM
C41
LViWID M 16 T i H ld C040 C041 M i REBRANDO b 15 20159 58AM
widia.com
H = H1
CRGP
NOTE: CRGP toolholders are able to use RPGX and RCGX insert styles.
order number catalogue number H B F L1 L2 H3 CD
gage
insert nest clamp
clamp
screw hex
right hand
3871515 CRGPR2525M06V 25 25 32,0 151 — — 7,3 R..X060400E NST1 CM214 MS1321 2.5 mm
3871519 CRGPR3232P09V 32 32 40,0 171 — — 8,3 R..X090700E NST2 CM219 CS412 9/64
3871517 CRGPR2525M09V 25 25 32,0 151 — — 7,3 R..X090700E NST2 CM219 CS412 9/64
3871521 CRGPR2525M12V 25 25 32,0 151 27,1 6,4 7,3 R..X120700E NST3 CM216 CS412 9/64
left hand
3871516 CRGPL2525M06V 25 25 32,0 151 — — 7,3 R..X060400E NST1 CM214 MS1321 2.5 mm
3871520 CRGPL3232P09V 32 32 40,0 171 — — 8,3 R..X090700E NST2 CM219 CS412 9/64
3871518 CRGPL2525M09V 25 25 32,0 151 — — 7,3 R..X090700E NST2 CM219 CS412 9/64
3871524 CRGPL3232P12V 32 32 40,0 171 37,1 — 8,3 R..X120700E NST3 CM216 CS412 9/64
3871522 CRGPL2525M12V 25 25 32,0 151 27,1 6,4 7,3 R..X120700E NST3 CM216 CS412 9/64
See page B184 for inserts.
C-Style Clamping Toolholders for Positive Inserts
Tools for External Turning and Internal Boring
WID_Master16_Turning_Holders_C040_C041_Metric_REBRAND.indd 41 10/30/15 3:06 PM
C42
LViWID M 16 T i H ld C042 C043 M i REBRAND O b 15 2015 9 59 AM
widia.com
S-Style Screw Clamp Toolholders for Positive Inserts
SCLC 95°
order number catalogue number H B F L1 L2
gage
insert shim
shim
screw hex
insert
screw Torx
right hand
3900169 SCLCR1010E06 10 10 12,0 70 12,0 CC..060204 ———MS1153 T7
3900172 SCLCR1212F06 12 12 16,0 80 12,0 CC..060204 ———MS1153 T7
3900170 SCLCR1212F09 12 12 16,0 80 16,0 CC..09T308 ———MS1155 T15
3879416 SCLCR1616H09 16 16 20,0 100 16,0 CC..09T308 SKCP343 SRS3 3.5 mm MS1156 T15
3879417 SCLCR2020K09 20 20 25,0 125 16,0 CC..09T308 SKCP343 SRS3 3.5 mm MS1156 T15
3879414 SCLCR2020K12 20 20 25,0 125 20,0 CC..120408 SKCP453 SRS4 4 mm MS1158 T15
3879418 SCLCR2525M12 25 25 32,0 150 19,8 CC..120408 SKCP453 SRS4 4 mm MS1158 T15
left hand
3900171 SCLCL1010E06 10 10 12,0 70 12,0 CC..060204 ———MS1153 T7
3900173 SCLCL1212F06 12 12 16,0 80 12,0 CC..060204 ———MS1153 T7
3900168 SCLCL1212F09 12 12 16,0 80 16,0 CC..09T308 ———MS1155 T15
3879411 SCLCL1616H09 16 16 20,0 100 16,0 CC..09T308 SKCP343 SRS3 3.5 mm MS1156 T15
3879412 SCLCL2020K09 20 20 25,0 125 16,0 CC..09T308 SKCP343 SRS3 3.5 mm MS1156 T15
3879415 SCLCL2020K12 20 20 25,0 125 20,0 CC..120408 SKCP453 SRS4 4 mm MS1158 T15
3879413 SCLCL2525M12 25 25 32,0 150 19,8 CC..120408 SKCP453 SRS4 4 mm MS1158 T15
SCDP 45°
order number catalogue number H B F L1 L2
gage
insert
insert
screw Torx
right hand
5094163 SCDPR1212H06 12 12 7,0 100 14,0 CP..060203 MS1153 T7
left hand
5094162 SCDPL1212H06 12 12 7,0 100 14,0 CP..060203 MS1153 T7
Tools for External Turning and Internal Boring
See pages B30–B46
for inserts.
See pages B30–B46
for inserts.
WID_Master16_Turning_Holders_C042_C043_Metric_REBRAND.indd 42 10/30/15 3:07 PM
C43
LViWID M 16 T i H ld C042 C043 M i REBRANDO b 15 20159 59AM
widia.com
S-Style Screw Clamp Toolholders for Positive Inserts
SCLP 95°
order number catalogue number H B F L1 L2
gage
insert
insert
screw Torx
right hand
5094217 SCLPR1010M06 10 10 11,0 150 11,4 CP..060203 MS1153 T7
5094218 SCLPR1212M06 12 12 13,0 150 11,4 CP..060203 MS1153 T7
left hand
5094212 SCLPL1212M06 12 12 13,0 150 11,4 CP..060203 MS1153 T7
SDHC 107,5°
order number catalogue number H B F L1 L2
gage
insert shim
shim
screw hex
insert
screw Torx
right hand
3879435 SDHCR1616H11 16 16 20,0 100 20,0 DC..11T308 SKDP343 SRS3 3.5 mm MS1156 T15
3879437 SDHCR2020K11 20 20 25,0 125 20,0 DC..11T308 SKDP343 SRS3 3.5 mm MS1156 T15
3879440 SDHCR2525M11 25 25 32,0 150 20,0 DC..11T308 SKDP343 SRS3 3.5 mm MS1156 T15
3879436 SDHCR2525M15 25 25 32,0 150 25,0 DC..150408 SKDP453 SRS4 4 mm MS1158 T15
left hand
3879433 SDHCL1616H11 16 16 20,0 100 20,0 DC..11T308 SKDP343 SRS3 3.5 mm MS1156 T15
3879439 SDHCL2020K11 20 20 25,0 125 20,0 DC..11T308 SKDP343 SRS3 3.5 mm MS1156 T15
3879438 SDHCL2525M11 25 25 32,0 150 20,0 DC..11T308 SKDP343 SRS3 3.5 mm MS1156 T15
3879434 SDHCL2525M15 25 25 32,0 150 25,0 DC..150408 SKDP453 SRS4 4 mm MS1158 T15
Tools for External Turning and Internal Boring
See pages B30–B46
for inserts.
See pages B47–B64
for inserts.
WID_Master16_Turning_Holders_C042_C043_Metric_REBRAND.indd 43 10/30/15 3:07 PM
C44
LViWID M 16 T i H ld C044 C045 M i REBRAND O b 15 2015 9 59 AM
widia.com
S-Style Screw Clamp Toolholders for Positive Inserts
SDJC 93°
order number catalogue number H B F L1 L2
gage
insert shim
shim
screw hex
insert
screw Torx
right hand
3879464 SDJCR1010M07 10 10 12,0 150 16,0 DC..070204 ———MS1153 T7
3899890 SDJCR1212F07 12 12 16,0 80 16,0 DC..070204 ———MS1153 T7
3900177 SDJCR1212F11 12 12 16,0 80 22,0 DC..11T308 ———MS1155 T15
3879456 SDJCR1616H07 16 16 20,0 100 16,0 DC..070204 ———MS1153 T7
3879459 SDJCR1616H11 16 16 20,0 100 22,0 DC..11T308 SKDP343 SRS3 3.5 mm MS1156 T15
3879458 SDJCR2020K07 20 20 25,0 125 16,0 DC..070204 ———MS1153 T7
3879460 SDJCR2020K11 20 20 25,0 125 22,0 DC..11T308 SKDP343 SRS3 3.5 mm MS1156 T15
3879457 SDJCR2020K15 20 20 25,0 125 32,0 DC..150408 SKDP453 SRS4 4 mm MS1158 T15
3879461 SDJCR2525M11 25 25 32,0 150 22,0 DC..11T308 SKDP343 SRS3 3.5 mm MS1156 T15
3879463 SDJCR2525M15 25 25 32,0 150 32,0 DC..150408 SKDP453 SRS4 4 mm MS1158 T15
3900175 SDJCR3225P15 32 25 32,0 170 32,0 DC..150408 SKDP453 SRS4 4 mm MS1158 T15
left hand
3899892 SDJCL1010E07 10 10 12,0 70 16,0 DC..070204 ———MS1153 T7
3899891 SDJCL1212F07 12 12 16,0 80 16,0 DC..070204 ———MS1153 T7
3900176 SDJCL1212F11 12 12 16,0 80 22,0 DC..11T308 ———MS1155 T15
3879441 SDJCL1616H07 16 16 20,0 100 16,0 DC..070204 ———MS1153 T7
2024450 SDJCL1616H11 16 16 20,0 100 21,0 DC..11T3.. ———12148038800 T15
3879454 SDJCL1616H11 16 16 20,0 100 22,0 DC..11T308 SKDP343 SRS3 3.5 mm MS1156 T15
3879442 SDJCL2020K07 20 20 25,0 125 16,0 DC..070204 ———MS1153 T7
3879462 SDJCL2020K11 20 20 25,0 125 22,0 DC..11T308 SKDP343 SRS3 3.5 mm MS1156 T15
3879848 SDJCL2020K15 20 20 25,0 125 32,0 DC..150408 SKDP453 SRS4 4 mm MS1158 T15
3879453 SDJCL2525M11 25 25 32,0 150 22,0 DC..11T308 SKDP343 SRS3 3.5 mm MS1156 T15
3879455 SDJCL2525M15 25 25 32,0 150 32,0 DC..150408 SKDP453 SRS4 4 mm MS1158 T15
3900174 SDJCL3225P15 32 25 32,0 170 32,0 DC..150408 SKDP453 SRS4 4 mm MS1158 T15
Tools for External Turning and Internal Boring
See pages B47–B64
for inserts.
WID_Master16_Turning_Holders_C044_C045_Metric_REBRAND.indd 44 10/30/15 3:07 PM
C45
LViWID M 16 T i H ld C044 C045 M i REBRANDO b 15 20159 59AM
widia.com
S-Style Screw Clamp Toolholders for Positive Inserts
SDNC 62,5°
order number catalogue number H B F L1 L2
gage
insert shim
shim
screw hex
insert
screw Torx
left hand
3879468 SDNCN0808L07 8 8 4,0 140 16,0 DC..070204 ———MS1153 T7
3879469 SDNCN1010M07 10 10 5,0 150 16,0 DC..070204 ———MS1153 T7
3900178 SDNCN1212F11 12 12 6,0 80 22,0 DC..11T308 SKDP343 SRS3 3.5 mm MS1156 T15
3879465 SDNCN1616H11 16 16 8,0 100 22,0 DC..11T308 SKDP343 SRS3 3.5 mm MS1156 T15
3879467 SDNCN2020K11 20 20 10,0 125 22,0 DC..11T308 SKDP343 SRS3 3.5 mm MS1156 T15
3879849 SDNCN2525M11 25 25 12,5 150 25,0 DC..11T308 SKDP343 SRS3 3.5 mm MS1156 T15
3879466 SDNCN2525M15 25 25 12,5 150 28,0 DC..150408 SKDP453 SRS4 4 mm MS1158 T15
3900179 SDNCN3225P15 32 25 12,5 170 32,5 DC..150408 SKDP453 SRS4 4 mm MS1158 T15
SRDC
order number catalogue number H B F L1 CD
gage
insert shim
shim
screw hex
insert
screw Torx
3879735 SRDCN1616H06 16 16 11,0 100 16,0 RC..0602M0 ———MS1153 T7
3879702 SRDCN1616H08 16 16 12,0 100 16,0 RC..0803M0 ———MS1154 T9
3900182 SRDCN2020K06 20 20 12,5 125 19,7 RC..0602M0 ———MS1153 T7
3879733 SRDCN2020K08 20 20 14,0 125 20,0 RC..0803M0 ———MS1154 T9
3879736 SRDCN2020K10 20 20 15,0 125 20,0 RC..10T3M0 SKRN100300 SRS3 3.5 mm MS1156 T15
3900183 SRDCN2525M06 25 25 15,0 150 19,7 RC..0602M0 ———MS1153 T7
3879737 SRDCN2525M08 25 25 16,5 150 25,0 RC..0803M0 ———MS1154 T9
3879734 SRDCN2525M10 25 25 17,5 150 25,0 RC..10T3M0 SKRN100300 SRS3 3.5 mm MS1156 T15
3879738 SRDCN2525M12 25 25 18,5 150 25,0 RC..1204M0 SKRN1203M0 SRS3 3.5 mm MS1156 T15
3900181 SRDCN3225P12 32 25 8,0 170 28,0 RC..1204M0 SKRN1203M0 SRS3 3.5 mm MS1156 T15
3900180 SRDCN3225P16 32 25 20,0 170 35,0 RC..1605M0 SKRN160400 SRS5 5 mm MS1160 T20
Tools for External Turning and Internal Boring
See pages B47–B64
for inserts.
See pages B65–B67
for inserts.
WID_Master16_Turning_Holders_C044_C045_Metric_REBRAND.indd 45 10/30/15 3:07 PM
C46
LViWID M 16 T i H ld C046 C047 M i REBRAND O b 15 2015 9 59 AM
widia.com
S-Style Screw Clamp Toolholders for Positive Inserts
SSBC 75°
order number catalogue number H B F L1 L2 FA
gage
insert shim
shim
screw hex
insert
screw Torx
right hand
3879850 SSBCR1616H09 16 16 13,0 100 16,0 2,2 SC..096308 SKSP343 SRS3 3.5 mm MS1156 T15
3879741 SSBCR2020K12 20 20 17,0 125 21,0 3,1 SC..120408 SKSP453 SRS4 4 mm MS1158 T15
3879740 SSBCR2525M12 25 25 22,0 150 21,0 3,1 SC..120408 SKSP453 SRS4 4 mm MS1158 T15
left hand
3879739 SSBCL1616H09 16 16 13,0 100 16,0 2,2 SC..09T308 SKSP343 SRS3 3.5 mm MS1156 T15
3879852 SSBCL2020K12 20 20 17,0 125 21,0 3,1 SC..120408 SKSP453 SRS4 4 mm MS1158 T15
3879851 SSBCL2525M12 25 25 22,0 150 21,0 3,1 SC..120408 SKSP453 SRS4 4 mm MS1158 T15
Tools for External Turning and Internal Boring
See pages B68–B80
for inserts.
WID_Master16_Turning_Holders_C046_C047_Metric_REBRAND.indd 46 10/30/15 3:07 PM
C47
LViWID M 16 T i H ld C046 C047 M i REBRANDO b 15 20159 59AM
widia.com
S-Style Screw Clamp Toolholders for Positive Inserts
SSSC 45°
order number catalogue number H B F L1 L2 FA L1A
gage
insert shim
shim
screw hex
insert
screw Torx
right hand
3879747 SSSCR1616H09 16 16 20,0 100 18,0 6,1 6,1 SC..09T308 SKSP343 SRS3 3.5 mm MS1156 T15
3879746 SSSCR2020K12 20 20 25,0 125 25,0 8,3 8,3 SC..120408 SKSP453 SRS4 4 mm MS1158 T15
3879744 SSSCR2525M12 25 25 32,0 150 25,0 8,3 8,3 SC..120408 SKSP453 SRS4 4 mm MS1158 T15
left hand
3879745 SSSCL1616H09 16 16 20,0 100 18,0 6,1 6,1 SC..09T308 SKSP343 SRS3 3.5 mm MS1156 T15
3879743 SSSCL2020K12 20 20 25,0 125 25,0 8,3 8,3 SC..120408 SKSP453 SRS4 4 mm MS1158 T15
3879742 SSSCL2525M12 25 25 32,0 150 25,0 8,3 8,3 SC..120408 SKSP453 SRS4 4 mm MS1158 T15
Tools for External Turning and Internal Boring
See pages B68–B80
for inserts.
WID_Master16_Turning_Holders_C046_C047_Metric_REBRAND.indd 47 10/30/15 3:07 PM
C48
LViWID M 16 T i H ld C048 C049 M i REBRAND O b 15 2015 9 59 AM
widia.com
S-Style Screw Clamp Toolholders for Positive Inserts
STFC 90°
order number catalogue number H B F L1 L2
gage
insert shim
shim
screw hex
insert
screw Torx
right hand
3900184 STFCR1212F11 12 12 16,0 80 13,0 TC..110204 ———MS1153 T7
3879763 STFCR2020K16 20 20 25,0 125 20,0 TC..16T308 SKTP343 SRS3 3.5 mm MS1156 T15
3879750 STFCR2525M16 25 25 32,0 150 20,0 TC..16T308 SKTP343 SRS3 3.5 mm MS1156 T15
left hand
3879751 STFCL1616H16 16 16 20,0 100 20,0 TC..16T308 SKTP343 SRS3 3.5 mm MS1156 T15
3879748 STFCL2020K16 20 20 25,0 125 20,0 TC..16T308 SKTP343 SRS3 3.5 mm MS1156 T15
3879752 STFCL2525M16 25 25 32,0 150 20,0 TC..16T308 SKTP343 SRS3 3.5 mm MS1156 T15
SVHB 107,5°
order number catalogue number H B F L1 L2
gage
insert shim
shim
screw hex
insert
screw Torx
right hand
3879767 SVHBR2020K16 20 20 25,0 125 28,0 VB..160408 SKVN343 SRS3 3.5 mm MS1156 T15
3879765 SVHBR2525M16 25 25 32,0 150 28,0 VB..160408 SKVN343 SRS3 3.5 mm MS1156 T15
3879853 SVHBR3225P16 32 25 32,0 170 25,0 VB..160408 SKVN343 SRS3 3.5 mm MS1156 T15
left hand
3879764 SVHBL2020K16 20 20 25,0 125 28,0 VB..160408 SKVN343 SRS3 3.5 mm MS1156 T15
3879766 SVHBL2525M16 25 25 32,0 150 28,0 VB..160408 SKVN343 SRS3 3.5 mm MS1156 T15
3879768 SVHBL3225P16 32 25 32,0 170 25,0 VB..160408 SKVN343 SRS3 3.5 mm MS1156 T15
Tools for External Turning and Internal Boring
See pages B81–B93
for inserts.
See pages B94–B99
for inserts.
WID_Master16_Turning_Holders_C048_C049_Metric_REBRAND.indd 48 10/30/15 3:07 PM
C49
LViWID M 16 T i H ld C048 C049 M i REBRANDO b 15 20159 59AM
widia.com
S-Style Screw Clamp Toolholders for Positive Inserts
SVJB 93°
order number catalogue number H B F L1 L2
gage
insert shim
shim
screw hex
insert
screw Torx
right hand
3879769 SVJBR1616H16 16 16 20,0 100 35,0 VB..160408 SKVN343 SRS3 3.5 mm MS1156 T15
3879776 SVJBR2020K16 20 20 25,0 125 35,0 VB..160408 SKVN343 SRS3 3.5 mm MS1156 T15
3879775 SVJBR2525M16 25 25 32,0 150 35,0 VB..160408 SKVN343 SRS3 3.5 mm MS1156 T15
3879773 SVJBR3225P16 32 25 32,0 170 35,0 VB..160408 SKVN343 SRS3 3.5 mm MS1156 T15
left hand
3879772 SVJBL1616H16 16 16 20,0 100 35,0 VB..160408 SKVN343 SRS3 3.5 mm MS1156 T15
3879770 SVJBL2020K16 20 20 25,0 125 35,0 VB..160408 SKVN343 SRS3 3.5 mm MS1156 T15
3879774 SVJBL2525M16 25 25 32,0 150 35,0 VB..160408 SKVN343 SRS3 3.5 mm MS1156 T15
3879771 SVJBL3225P16 32 25 32,0 170 35,0 VB..160408 SKVN343 SRS3 3.5 mm MS1156 T15
SVVB 72,5°
order number catalogue number H B F L1 L2
gage
insert shim
shim
screw hex
insert
screw Torx
3879777 SVVBN2020K16 20 20 10,0 125 33,0 VB..160408 SKVN343 SRS3 3.5 mm MS1156 T15
3879778 SVVBN2525M16 25 25 12,5 150 33,0 VB..160408 SKVN343 SRS3 3.5 mm MS1156 T15
3879779 SVVBN3225P16 32 25 12,5 170 33,0 VB..160408 SKVN343 SRS3 3.5 mm MS1156 T15
Tools for External Turning and Internal Boring
See pages B94–B99
for inserts.
See pages B94–B99
for inserts.
WID_Master16_Turning_Holders_C048_C049_Metric_REBRAND.indd 49 10/30/15 3:07 PM
C50
LViWID M 16 T i H ld C050 C051 M i REBRAND N b 11 2015 11 33 AM
widia.com
Tools for Internal Boring
Today’s modern boring operations require the most reliable, high-
performance tools. WIDIA™ offers an extensive range of toolholders
for internal boring to meet even the most precise production demands
across a broad spectrum of workpiece shapes and sizes.
WIDIA boring bars, available with both a conventional steel shank or a vibration-resistant
carbide shank and coolant hole, guarantee consistent results and enhanced production reliability.
D-Style Clamping P-Style Clamping
• Used for negative style inserts.
• Clamp assembly contains clamp, screw,
and retaining ring.
• Quick insert indexing.
• Ensures insert repeatability and seating.
• Reduced chatter and extended tool life.
• Lever-type clamping system
for negative indexable inserts.
• No interference to chip fl ow.
• Fast insert changes.
P-style available in metric sizes only.
WID_Master16_Turning_Holders_C050_C051_Metric_REBRAND.indd 50 11/11/15 5:36 PM
C51
LViWID M 16 T i H ld C050 C051 M i REBRANDN b 11 201511 33AM
widia.com
S-Style Clamping
C-Style Clamping
• Screw clamping system for positive
indexable inserts.
• Compact design for high reliability
and cost effi ciency.
• Carbide shim for additional tool protection.
• Height-adjustable clamp permits use
of additional chipbreakers.
• Universal clamping system for positive
and negative fl at top inserts.
• Robust engineering makes it easy to handle.
• Carbide shim for extra tool protection.
WID_Master16_Turning_Holders_C050_C051_Metric_REBRAND.indd 51 11/11/15 5:36 PM
C52
LViWID M 16 T i H ld C052 C053 M i REBRAND O b 15 2015 10 00 AM
widia.com
P-Style Clamping
PA-PCLN A-PTFN A-PWLN
95° 90° 95°
Page: Page: Page:
C60 C60 C61
Lever-type clamping
system for negative
indexable inserts with
hole to DIN 4988 and
positive round inserts
more than 20mm in
diameter. Inserts with
one- and two-side chip
control geometries have
positive rakes from 6°
to 18°. Advantages of
this system are fast
insert changes and
no interference with
chip ow.
Each unique clamping system offers product options to ll your
speci c toolholder needs. Find the illustration that ts your application
and navigate to the corresponding page to get the correct solution.
Boring Bar Selection Guide
A-DCLN Product Name
Application Illustration
Page: C56 Page Number
D-Style Clamping
DA-DCLN A-DDPN A-DDQN A-DDUN
95° 117,5° 107,5° 93°
Page: Page: Page: Page:
C56 C56 C57 C57
One-piece clamp
assembly holder for
use with negative style
inserts. An extremely rigid
clamping system. The
tool is protected by
a carbide shim.
A-DTFN DVUN A-DWLN
90° 93° 95°
Page: Page: Page:
C58 C58 C59
WID_Master16_Turning_Holders_C052_C053_Metric_REBRAND.indd 52 10/30/15 3:07 PM
C53
LViWID M 16 T i H ld C052 C053 M i REBRANDO b 15 201510 00AM
widia.com
Boring Bar Selection Guide
C-Style Clamping
CS-CCLN-MX
S-CCLN-MN S-CDQN-MX S-CSSN-MX
95° 95° 45°
Page: Page: Page: Page:
C62 C62 C63 C63
Top clamping system
for negative and positive
indexable inserts to DIN
4968. This universal
clamping system is
robust and easy to handle.
Some height-adjustable
clamps enable the use of
additional chipbreakers.
A carbide shim provides
additional tool protection.
Toolholders with cutting
edge heights upwards
of 16mm and insert iCs
greater than 6,35mm.
S-CSYN-MN
S-CWLN-MX
A-CTFP
85° 95° 90°
Page: Page: Page:
C64 C64 C65
S-Style Clamping
SA-SCFP E-SCFC E-SCFP A-SCLC
90° 90° 90° 95°
Page: Page: Page: Page:
C66 C66 C67 C67
Screw clamping system
for positive indexable
inserts with countersunk
hole to DIN 4967.
Compact design using
a minimum of spare
parts for high reliability
and cost ef ciency. A
carbide shim provides
additional tool protection.
Toolholders with cutting
edge heights upwards
of .625" and insert
iCs from .375" are
secured by means
of a threaded bushing.
E-SCLC A-SCLP E-SCLP A-SDQC
95° 95° 95° 107,5°
Page: Page: Page: Page:
C68 C69 C70 C71
E-SDQC A-SDQP A-SDUC E-SDUC
107,5° 93° 93°
Page: Page: Page: Page:
C72 C72 C73 C74
A-SDUP E-SDUP A-SDXP A-STFC
93° 93° 95° 90°
Page: Page: Page: Page:
C75 C75 C76 C76
E-STFC A-STFP E-STFP A-STWP
90° 90° 90° 60°
Page: Page: Page: Page:
C77 C78 C79 C80
A-SVQB A-SVUB
107,5° 93°
Page: Page:
C80 C81
WID_Master16_Turning_Holders_C052_C053_Metric_REBRAND.indd 53 10/30/15 3:07 PM
C54
LViWID M 16 T i H ld C054 C055 M i REBRAND O b 15 2015 10 00 AM
widia.com
A32SD C
Bar Type Bar Diameter Bar Length** Insert
Holding Method
Insert Shape
3 = F
3.5 = G
4 = H
4.5 = J
5 = K
5.5 = L
6 = M
6.5 = N
7 = Q
8 = R
10 = S
12 = T
14 = U
16 = V
18 = W
20 = Y
D
A
Metric:
A two-digit number
indicates the bar
diameter in mm.
If the diameter is
represented by a
one digit number, a
0 (zero) will be used
in front of it.
Example:
8mm = 08
B
C
C
D
E
** Used only
when more than
one length is
available or a
special length
is required.
H
S
K
L
M
P
O
P
R
S
T
V
W
How Do Catalogue Numbers Work?
Each character in our catalogue number signi es a speci c trait of that
product. Use the following key columns and corresponding images
toeasily identify which attributes apply.
Boring Bar
Catalogue Numbering System
A
Steel bar with coolant
S
Steel bar without
coolant
C
Carbide bar
D
DeVibrator bar
with coolant
D
Tunable bar
with coolant
E
Carbide bar
with coolant
B
DeVibrator
H
Interchangeable
head
L
Heavy metal bar
with coolant
A32SDCLNL12KC04
WID_Master16_Turning_Holders_C054_C055_Metric_REBRAND.indd 54 10/30/15 3:07 PM
C55
LViWID M 16 T i H ld C054 C055 M i REBRANDO b 15 201510 00AM
widia.com
By referencing this easy-to-use guide, you can
identify the correct product to meet your needs.
Boring Bar
Catalogue Numbering System
L N L 12 KC04
Bar Style or
Lead Angle
Insert
Clearance Angle
Hand of Tool Insert Size
Cutting Edge
Length L10
Additional
Information
E
NR =
Right-hand boring bar
F
B
R
K
C
L
P
(E-style inserts)
L
D
L =
P
E
Left-hand boring bar
L
Q
F
S
U
X
M... =
M.. MF, MN, MX,
for ceramic and
PcBN inserts
KC =
D-Style Clamping
+ =
Insert thickness
A32SDCLNL12KC04
H
L10
O
L10
P
L10
S
L10
T
L10
CDE
M
V
L10
W
L10
L
L10
A
B
K
L10
R
D
WID_Master16_Turning_Holders_C054_C055_Metric_REBRAND.indd 55 10/30/15 3:08 PM
C56
LViWID M 16 T i H ld C056 C057 M i REBRAND O b 15 2015 10 01 AM
widia.com
D-Style Clamping Boring Bars for Negative Inserts
Steel Shank with Through Coolant
A-DCLN 95°
order number catalogue number D D min F L1 CS aF°
gage
insert shim
shim
screw
Torx
Plus
clamp
assembly
slotted
pin
Torx
Plus
right hand
5696071 A25RDCLNR12KC04 25 32,0 17,0 200 1/4-18 NPT -12.0 CN..120408 ———CM234RLP ASSY SSP025016M 15 IP
5696073 A32SDCLNR12KC04 32 40,0 22,0 250 1/4-18 NPT -12.0 CN..120408 ICSN433 KMSP415IP 15 IP CM234R ASSY SSP025016M 15 IP
5696075 A40TDCLNR12KC04 40 50,0 27,0 300 1/4-18 NPT -9.0 CN..120408 ICSN433 KMSP415IP 15 IP CM234R ASSY SSP025016M 15 IP
5696077 A40TDCLNR16KC06 32 45,0 27,0 250 1/4-18 NPT -12.0 CN..160612 ICSN533 KMSP515IP 15 IP CM209R ASSY SSP025018M 15 IP
left hand
5696072 A25RDCLNL12KC04 25 32,0 17,0 200 1/4-18 NPT -12.0 CN..120408 ———CM234RLP ASSY SSP025016M 15 IP
5696074 A32SDCLNL12KC04 40 50,0 27,0 300 1/4-18 NPT -9.0 CN..120408 ICSN433 KMSP415IP 15 IP CM234R ASSY SSP025016M 15 IP
5696076 A40TDCLNL12KC04 32 45,0 27,0 250 1/4-18 NPT -12.0 DN..150608 ICSN433 KMSP415IP 15 IP CM234R ASSY SSP025016M 15 IP
5696078 A40TDCLNL16KC06 32 45,0 27,0 250 1/4-18 NPT -12.0 CN..160612 ICSN533 KMSP515IP 15 IP CM209R ASSY SSP025018M 15 IP
A-DDPN 117,5°
order number catalogue number D D min F L1 L1A CS aF°
gage
insert shim
shim
screw
Torx
Plus
clamp
assembly
slotted
pin
Torx
Plus
right hand
5696079 A25RDDPNR11KC04 32 45,0 27,0 250 6,5 1/4-18 NPT -12.0 DN..150608 IDSN322 KMSP315IP 15 IP CM234RLP ASSY SSP025016M 15 IP
5696080 A32SDDPNR15KC06 40 52,0 30,0 300 6,6 1/4-18 NPT -10.0 DN..150608 IDSN433 KMSP415IP 15 IP CM234R ASSY SSP025016M 15 IP
5696082 A40TDDPNR15KC06 40 52,0 30,0 300 6,6 1/4-18 NPT -10.0 DN..150608 IDSN433 KMSP415IP 15 IP CM234R ASSY SSP025016M 15 IP
left hand
5696081 A32SDDPNL15KC06 40 52,0 30,0 300 6,6 1/4-18 NPT -10.0 DN..150608 IDSN433 KMSP415IP 15 IP CM234R ASSY SSP025016M 15 IP
5696083 A40TDDPNL15KC06 40 52,0 30,0 300 6,6 1/4-18 NPT -10.0 DN..150608 IDSN433 KMSP415IP 15 IP CM234R ASSY SSP025016M 15 IP
Tools for External Turning and Internal Boring
See pages B30–B46
for inserts.
See pages B47–B64
for inserts.
Steel shank with
through coolant.
Steel shank with
through coolant.
WID_Master16_Turning_Holders_C056_C057_Metric_REBRAND.indd 56 10/30/15 3:08 PM
C57
LViWID M 16 T i H ld C056 C057 M i REBRANDO b 15 201510 01AM
widia.com
D-Style Clamping Boring Bars for Negative Inserts
Steel Shank with Through Coolant
A-DDQN 107,5°
order number catalogue number D D min F L1 CS aF° aP°
gage
insert shim
shim
screw
Torx
Plus
clamp
assembly
slotted
pin
Torx
Plus
right hand
5696085 A32SDDQNR15KC06 32 40,0 22,0 250 1/4-18 NPT -12.0 -10.0 DN..150608 IDSN433 KMSP415IP 15 IP CM234RLP ASSY SSP025016M 15 IP
5696087 A40TDDQNR15KC06 40 50,0 27,0 300 1/4-18 NPT -10.0 -10.0 DN..150608 IDSN433 KMSP415IP 15 IP CM234R ASSY SSP025016M 15 IP
left hand
5696086 A32SDDQNL15KC06 32 40,0 22,0 250 1/4-18 NPT -12.0 -10.0 DN..150608 IDSN433 KMSP415IP 15 IP CM234RLP ASSY SSP025016M 15 IP
5696088 A40TDDQNL15KC06 40 50,0 27,0 300 1/4-18 NPT -10.0 -10.0 DN..150608 IDSN433 KMSP415IP 15 IP CM234R ASSY SSP025016M 15 IP
A-DDUN 93°
order number catalogue number D D min F L1 CS aF°
gage
insert shim
shim
screw
Torx
Plus
clamp
assembly
slotted
pin
Torx
Plus
right hand
5696089 A25RDDUNR11KC04 25 32,0 17,0 200 1/4-18 NPT -12.0 DN..110408 ———CM234RLP ASSY SSP025016M 15 IP
5696211 A32SDDUNR11KC04 32 40,0 22,0 250 1/4-18 NPT -12.0 DN..110408 IDSN322 KMSP315IP 15 IP CM234R ASSY SSP025016M 15 IP
5696213 A32SDDUNR15KC06 32 40,0 22,0 250 1/4-18 NPT -12.0 DN..150608 IDSN433 KMSP415IP 15 IP CM234R ASSY SSP025016M 15 IP
5696215 A40TDDUNR15KC06 40 50,0 27,0 300 1/4-18 NPT -9.0 DN..150608 IDSN433 KMSP415IP 15 IP CM234R ASSY SSP025016M 15 IP
5696217 A50UDDUNR15KC06 50 63,0 35,0 350 1/4-18 NPT -7.0 DN..150608 IDSN433 KMSP415IP 15 IP CM234R ASSY SSP025016M 15 IP
left hand
5696210 A25RDDUNL11KC04 25 32,0 17,0 200 1/4-18 NPT -12.0 DN..110408 ———CM234RLP ASSY SSP025016M 15 IP
5696212 A32SDDUNL11KC04 32 40,0 22,0 250 1/4-18 NPT -12.0 DN..110408 IDSN322 KMSP315IP 15 IP CM234R ASSY SSP025016M 15 IP
5696214 A32SDDUNL15KC06 32 40,0 22,0 250 1/4-18 NPT -12.0 DN..150608 IDSN433 KMSP415IP 15 IP CM234R ASSY SSP025016M 15 IP
5696216 A40TDDUNL15KC06 40 50,0 27,0 300 1/4-18 NPT -9.0 DN..150608 IDSN433 KMSP415IP 15 IP CM234R ASSY SSP025016M 15 IP
5696218 A50UDDUNL15KC06 50 63,0 35,0 350 1/4-18 NPT -7.0 DN..150608 IDSN433 KMSP415IP 15 IP CM234R ASSY SSP025016M 15 IP
Tools for External Turning and Internal Boring
See pages B47–B64
for inserts.
Steel shank with
through coolant.
Steel shank with
through coolant.
See pages B47–B64
for inserts.
WID_Master16_Turning_Holders_C056_C057_Metric_REBRAND.indd 57 10/30/15 3:08 PM
C58
LViWID M 16 T i H ld C058 C059 M i REBRAND O b 15 2015 10 01 AM
widia.com
D-Style Clamping Boring Bars for Negative Inserts
Steel Shank with Through Coolant
A-DTFN 90°
order number catalogue number D D min F L1 CS aF°
gage
insert shim
shim
screw
Torx
Plus
clamp
assembly
slotted
pin
Torx
Plus
right hand
5696219 A25RDTFNR16KC04 25 32,0 17,0 200 1/4-18 NPT -14.0 TN..160408 ITSN323 KMSP315IP 15 IP CM234RLP ASSY SSP025016M 15 IP
5696261 A32SDTFNR16KC04 32 40,0 22,0 250 1/4-18 NPT -12.0 TN..160408 ITSN323 KMSP315IP 15 IP CM234RLP ASSY SSP025016M 15 IP
left hand
5696260 A25RDTFNL16KC04 25 32,0 17,0 200 1/4-18 NPT -14.0 TN..160408 ITSN323 KMSP315IP 15 IP CM234RLP ASSY SSP025016M 15 IP
5696262 A32SDTFNL16KC04 32 40,0 22,0 250 1/4-18 NPT -12.0 TN..160408 ITSN323 KMSP315IP 15 IP CM234RLP ASSY SSP025016M 15 IP
A-DVUN 93°
order number catalogue number D D min F L1 CS aF°
gage
insert shim
shim
screw
Torx
Plus
clamp
assembly
slotted
pin
Torx
Plus
right hand
5696263 A32SDVUNR16KC04 32 40,0 22,0 250 1/4-18 NPT -9.0 VN..160408 IVSN322 KMSP315IP 15 IP CM234R ASSY SSP025016M 15 IP
5696265 A40TDVUNR16KC04 40 50,0 27,0 300 1/4-18 NPT -8.0 VN..160408 IVSN322 KMSP315IP 15 IP CM215R ASSY SSP025016M 15 IP
left hand
5696264 A32SDVUNL16KC04 32 40,0 22,0 250 1/4-18 NPT -9.0 VN..160408 IVSN322 KMSP315IP 15 IP CM234R ASSY SSP025016M 15 IP
5696266 A40TDVUNL16KC04 40 50,0 27,0 300 1/4-18 NPT -8.0 VN..160408 IVSN322 KMSP315IP 15 IP CM215R ASSY SSP025016M 15 IP
Tools for External Turning and Internal Boring
See pages B81–B93
for inserts.
See pages B94–B99
for inserts.
Steel shank with
through coolant.
Steel shank with
through coolant.
WID_Master16_Turning_Holders_C058_C059_Metric_REBRAND.indd 58 10/30/15 3:08 PM
C59
LViWID M 16 T i H ld C058 C059 M i REBRANDO b 15 201510 01AM
widia.com
D-Style Clamping Boring Bars for Negative Inserts
Steel Shank with Through Coolant
A-DWLN 95°
order number catalogue number D D min F L1 CS aF°
gage
insert shim
shim
screw
Torx
Plus
clamp
assembly
slotted
pin
Torx
Plus
right hand
5696267 A25RDWLNR06KC04 25 32,0 17,0 200 1/4-18 NPT -14.0 WN..060408 ———CM234RLP ASSY SSP025016M 15 IP
5696269 A25RDWLNR08KC04 25 32,0 17,0 200 1/4-18 NPT -12.0 WN..080408 ———CM234RLP ASSY SSP025016M 15 IP
5696281 A32SDWLNR08KC04 32 40,0 22,0 250 1/4-18 NPT -14.0 WN..080408 IWSN433 KMSP415IP 15 IP CM234RLP ASSY SSP025016M 15 IP
5696283 A40TDWLNR08KC04 40 50,0 27,0 300 1/4-18 NPT -14.0 WN..080408 IWSN433 KMSP415IP 15 IP CM234R ASSY SSP025016M 15 IP
left hand
5696268 A25RDWLNL06KC04 25 32,0 17,0 200 1/4-18 NPT -14.0 WN..060408 ———CM234RLP ASSY SSP025016M 15 IP
5696280 A25RDWLNL08KC04 25 32,0 17,0 200 1/4-18 NPT -12.0 WN..080408 ———CM234RLP ASSY SSP025016M 15 IP
5696282 A32SDWLNL08KC04 32 40,0 22,0 250 1/4-18 NPT -14.0 WN..080408 IWSN433 KMSP415IP 15 IP CM234RLP ASSY SSP025016M 15 IP
5696284 A40TDWLNL08KC04 40 50,0 27,0 300 1/4-18 NPT -14.0 WN..080408 IWSN433 KMSP415IP 15 IP CM234R ASSY SSP025016M 15 IP
Tools for External Turning and Internal Boring
Steel shank with
through coolant.
See pages B99–B105
for inserts.
WID_Master16_Turning_Holders_C058_C059_Metric_REBRAND.indd 59 10/30/15 3:08 PM
C60
LViWID M 16 T i H ld C060 C061 M i REBRAND O b 15 2015 10 02 AM
widia.com
P-Style Clamping Boring Bars for Negative Inserts
Steel Shank with Through Coolant
A-PCLN 95°
order number catalogue number D D min F L1 L2 CS aF°
gage
insert shim
shim
pin pin
toggle
lever
lever
screw
Torx
Plus
right hand
3883468 A25TPCLNR12 25 32,0 17,0 300 40 1/4-18 NPT -12.0 CN..120408 — — — 511.022 514.122 10 IP
3883466 A32UPCLNR12 32 40,0 22,0 350 50 1/4-18 NPT -10.0 CN..120408 512.112 513.023 515.018 511.023 514.123 15 IP
3883463 A40VPCLNR12 40 50,0 27,0 400 55 1/4-18 NPT -10.0 CN..120408 512.112 513.023 515.018 511.023 514.123 15 IP
3883442 A40VPCLNR16 40 50,0 27,0 400 55 1/4-18 NPT -11.0 CN..160612 512.117 513.025 515.022 511.025 514.125 15 IP
left hand
3883469 A25TPCLNL12 25 32,0 17,0 300 40 1/4-18 NPT -12.0 CN..120408 — — — 511.022 514.122 10 IP
3883467 A32UPCLNL12 32 40,0 22,0 350 50 1/4-18 NPT -10.0 CN..120408 512.112 513.023 515.018 511.023 514.123 15 IP
3883465 A40VPCLNL12 40 50,0 27,0 400 55 1/4-18 NPT -10.0 CN..120408 512.112 513.023 515.018 511.023 514.123 15 IP
3883464 A40VPCLNL16 40 50,0 27,0 400 55 1/4-18 NPT -11.0 CN..160612 512.117 513.025 515.022 511.025 514.125 15 IP
A-PTFN 90°
order number catalogue number D D min F L1 L2 CS aF°
gage
insert shim
shim
pin pin
toggle
lever
lever
screw
Torx
Plus
right hand
3883263 A25TPTFNR16 25 32,0 17,0 300 40 1/4-18 NPT -12.0 TN..160408 512.013 513.018 515.018 511.018 514.118 10 IP
3883151 A32UPTFNR16 32 40,0 22,0 350 50 1/4-18 NPT -10.0 TN..160408 512.013 513.018 515.018 511.018 514.118 10 IP
3883149 A40VPTFNR22 40 48,0 27,0 400 55 1/4-18 NPT -10.0 TN..220408 512.023 513.023 515.018 511.023 514.123 15 IP
left hand
3883264 A25TPTFNL16 25 32,0 17,0 300 40 1/4-18 NPT -12.0 TN..160408 512.013 513.018 515.018 511.018 514.118 10 IP
3883150 A40VPTFNL22 40 48,0 27,0 400 55 1/4-18 NPT -10.0 TN..220408 512.023 513.023 515.018 511.023 514.123 15 IP
Tools for External Turning and Internal Boring
See pages B30–B46
for inserts.
See pages B81–B93
for inserts.
Steel shank with
through coolant.
Steel shank with
through coolant.
WID_Master16_Turning_Holders_C060_C061_Metric_REBRAND.indd 60 10/30/15 3:08 PM
C61
LViWID M 16 T i H ld C060 C061 M i REBRANDO b 15 201510 02AM
widia.com
P-Style Clamping Boring Bars for Negative Inserts
Steel Shank with Through Coolant
A-PWLN 95°
order number catalogue number D D min F L1 L2 CS aF°
gage
insert shim
shim
pin pin
toggle
lever
lever
screw
Torx
Plus
right hand
3883459 A16RPWLNR06 16 27,0 11,0 200 32 1/8-27 NPT -12.0 WN..060408 — — — 511.030 514.112 —
3883455 A20SPWLNR06 20 25,0 13,0 250 — 1/8-27 NPT -14.0 WN..060408 — — — 511.030 514.112 8 IP
3883458 A25RPWLNR08 25 32,0 17,0 200 — 1/4-18 NPT -12.0 WN..080408 512.135 513.023 515.018 511.023 514.123 15 IP
3883454 A32SPWLNR08 32 40,0 22,0 250 50 1/4-18 NPT -10.0 WN..080408 512.135 513.023 515.018 511.023 514.123 —
left hand
3883461 A16RPWLNL06 16 27,0 11,0 200 32 1/8-27 NPT -12.0 WN..060408 — — — 511.030 514.112 —
3883457 A20SPWLNL06 20 25,0 13,0 250 — 1/8-27 NPT -14.0 WN..060408 — — — 511.030 514.112 8 IP
3883456 A32SPWLNL08 32 40,0 22,0 250 50 1/4-18 NPT -10.0 WN..080408 512.135 513.023 515.018 511.023 514.123 —
Tools for External Turning and Internal Boring
Steel shank with
through coolant.
See pages B99–B105
for inserts.
WID_Master16_Turning_Holders_C060_C061_Metric_REBRAND.indd 61 10/30/15 3:08 PM
C62
LViWID M 16 T i H ld C062 C063 M i REBRAND O b 15 2015 10 02 AM
widia.com
C-Style Clamping Boring Bars for Negative Inserts
Steel Shank with Through Coolant
S-CCLN-MX 95°
NOTE: MN — clamping version is shown.
order number catalogue number D D min F L1 L2 aF° aP°
gage
insert shim
shim
screw hex
clamp
assembly hex
right hand
3883565 S32SCCLNR12MX7 32 40,0 22,0 251 43 -14.0 -5.0 CN.X120708 ———551.316 4 mm
3029009 S40TCCLNR12MX7 40 55,0 27,0 300 40 -14.0 -6.0 CN.X120708 552.221 554.252 2.5 mm 551.316 4 mm
left hand
3883564 S32SCCLNL12MX7 32 40,0 22,0 251 43 -14.0 -5.0 CN.X120708 ———551.316 4 mm
3029010 S40TCCLNL12MX7 40 55,0 27,0 300 40 -14.0 -6.0 CN.X120708 552.221 554.252 2.5 mm 551.316 4 mm
S-CCLN-MN 95°
NOTE: MN — clamping version is shown.
order number catalogue number D D min F L1 L2 aF° aP°
gage
insert shim
shim
screw hex
thrust
plate
clamp
assembly hex
right hand
3029011 S40TCCLNR12MN4 40 55,0 27,0 300 40 -14.0 -6.0 CN.N120408 552.220 554.252 2.5 mm 557.111 551.317 4 mm
3029143 S40TCCLNR12MN7 40 55,0 27,0 300 40 -14.0 -6.0 CN.N120708 552.221 554.253 2.5 mm 557.111 551.317 4 mm
left hand
3029012 S40TCCLNL12MN4 40 55,0 27,0 300 40 -14.0 -6.0 CN.N120408 552.220 554.252 2.5 mm 557.111 551.317 4 mm
3029144 S40TCCLNL12MN7 40 55,0 27,0 300 40 -14.0 -6.0 CN.N120708 552.221 554.252 2.5 mm 557.111 551.317 4 mm
Tools for External Turning and Internal Boring
See pages B177–B179 and
B197–B205 for inserts.
See pages B177–B179 and
B197–B205 for inserts.
Steel shank with
through coolant.
Steel shank with
through coolant.
WID_Master16_Turning_Holders_C062_C063_Metric_REBRAND.indd 62 10/30/15 3:08 PM
C63
LViWID M 16 T i H ld C062 C063 M i REBRANDO b 15 201510 02AM
widia.com
C-Style Clamping Boring Bars for Negative Inserts
Steel Shank with Through Coolant
S-CDQN-MX
NOTE: MN — clamping version is shown.
order number catalogue number D D min F L1 L2 aF° aP°
gage
insert shim
shim
screw hex
clamp
assembly hex
right hand
3883567 S40TCDQNR12MX7 40 50,0 27,0 302 45,0 -14.0 -5.0 DN.X120708 552.225 554.254 2.5 mm 551.316 4 mm
left hand
3883566 S40TCDQNL12MX7 40 50,0 27,0 302 45,0 -14.0 -5.0 DN.X120708 552.225 554.254 2.5 mm 551.316 4 mm
S-CSSN-MX 45°
NOTE: MX — clamping version is shown.
order number catalogue number D D min F L1 L2 L1A FA
gage
insert shim
shim
screw hex
clamp
assembly hex
right hand
3029151 S40TCSSNR12MX7 40 55,0 27,0 300 67,0 8,5 8,2 SN.X120708 552.232 554.252 2.5 mm 551.316 4 mm
left hand
3029152 S40TCSSNL12MX7 40 55,0 27,0 300 67,0 8,5 8,2 SN.X120708 552.232 554.252 2.5 mm 551.316 4 mm
Tools for External Turning and Internal Boring
Steel shank with
through coolant.
Steel shank with
through coolant.
See pages B180–B181 and
B206–B216 for inserts.
See pages B186–B191 and
B211–B212 for inserts.
WID_Master16_Turning_Holders_C062_C063_Metric_REBRAND.indd 63 10/30/15 3:08 PM
C64
LViWID M 16 T i H ld C064 C065 M i REBRAND O b 15 2015 10 02 AM
widia.com
C-Style Clamping Boring Bars for Negative Inserts
Steel Shank with Through Coolant
S-CSYN-MN 85°
NOTE: MN — clamping version is shown.
order number catalogue number D D min F L1 L2 L1A
gage
insert shim
shim
screw hex
thrust
plate
clamp
assembly hex
right hand
3883569 S40TCSYNR12MN7 40 55,0 27,0 300 67,0 1,0 SN.N120708 552.232 554.252 2.5 mm 557.111 551.317 4 mm
left hand
3883568 S40TCSYNL12MN7 40 55,0 27,0 300 67,0 1,0 SN.N120708 552.232 554.252 2.5 mm 557.111 551.317 4 mm
S-CWLN-MX 95°
NOTE: MX — clamping version is shown.
order number catalogue number D D min F L1 L2
gage
insert shim
shim
screw hex
clamp
assembly hex
right hand
3029153 S40TCWLNR08MX7 40 80,0 27,0 300 55,0 WN.X080708 552.210 554.252 2.5 mm 551.316 4 mm
left hand
3029154 S40TCWLNL08MX7 40 80,0 27,0 300 55,0 WN.X080708 552.210 554.252 2.5 mm 551.316 4 mm
Tools for External Turning and Internal Boring
See pages B186–B191 and
B211–B212 for inserts.
See pages B195–B198
and B218 for inserts.
Steel shank with
through coolant.
Steel shank with
through coolant.
WID_Master16_Turning_Holders_C064_C065_Metric_REBRAND.indd 64 10/30/15 3:08 PM
C65
LViWID M 16 T i H ld C064 C065 M i REBRANDO b 15 201510 02AM
widia.com
C-Style Clamping Boring Bars for Positive Inserts
Steel Shank with Through Coolant
A-CTFP 90°
order number catalogue number D D min F L1 CS aF°
gage
insert shim
shim
screw hex clamp
clamp
screw hex
right hand
3883451 A16RCTFPR11 16 20,0 11,0 200 1/8-27 NPT -4.0 TP..110304 ———CKM19 STCM9 2.5 mm
3883450 A25RCTFPR16 25 32,0 17,0 200 1/4-18 NPT -3.0 TP..160308 SM841 MS110 2 mm CKM10 STCM8 4 mm
left hand
3883453 A16RCTFPL11 16 20,0 11,0 200 1/8-27 NPT -4.0 TP..110304 ———CKM19 STCM9 2.5 mm
3883452 A25RCTFPL16 25 32,0 17,0 200 1/4-18 NPT -3.0 TP..160308 SM841 MS110 2 mm CKM10 STCM8 4 mm
Tools for External Turning and Internal Boring
Steel shank with
through coolant.
See pages B192–B194 and
B212–B216 for inserts.
WID_Master16_Turning_Holders_C064_C065_Metric_REBRAND.indd 65 10/30/15 3:08 PM
C66
LViWID M 16 T i H ld C066 C067 M i REBRAND N b 11 2015 7 39 AM
widia.com
S-Style Clamping Boring Bars for Positive Inserts
Carbide Shank with Through Coolant
A-SCFP 90°
order number catalogue number D D min F L1 A CS aF°
gage
insert
insert
screw Torx
right hand
5077442 A08JSCFPR06 8 11,0 6,0 110 2,4 — -8.0 CP..0602.. MS1153 T7
5077449 A10KSCFPR06 10 13,0 7,0 125 3,2 — -6.0 CP..0602.. MS1153 T7
5077497 A12MSCFPR06 12 16,0 9,0 150 — 1/16 - 27 NPT -4.0 CP..0602.. MS1153 T7
5077552 A16RSCFPR06 16 20,0 11,0 200 — 1/8 - 27 NPT -5.0 CC..0602.. MS1153 T7
5077553 A16RSCFPR09 16 20,0 11,0 200 — 1/8 - 27 NPT -4.0 CP..09T3.. MS1155 T15
5077614 A20SSCFPR06 20 25,0 13,0 250 — 1/8 - 27 NPT -3.0 CC..0602.. MS1153 T7
5077615 A20SSCFPR09 20 25,0 13,0 250 — 1/8 - 27 NPT -2.0 CP..09T3.. MS1155 T15
left hand
5077441 A08JSCFPL06 8 11,0 6,0 110 2,4 — -8.0 CP..0602.. MS1153 T15
5077447 A10KSCFPL06 10 13,0 7,0 125 3,2 — -6.0 CP..0602.. MS1153 T7
5077496 A12MSCFPL06 12 16,0 9,0 150 — 1/16 - 27 NPT -4.0 CP..0602.. MS1153 T7
5077550 A16RSCFPL06 16 20,0 11,0 200 — 1/8 - 27 NPT -5.0 CC..0602.. MS1153 T7
5077551 A16RSCFPL09 16 20,0 11,0 200 — 1/8 - 27 NPT -4.0 CP..09T3.. MS1155 T15
5077556 A20SSCFPL06 20 25,0 13,0 250 — 1/8 - 27 NPT -3.0 CC..0602.. MS1153 T7
5077557 A20SSCFPL09 20 25,0 13,0 250 — 1/8 - 27 NPT -2.0 CP..09T3.. MS1155 T7
Tools for External Turning and Internal Boring
See pages B30–B46
for inserts.
Steel shank with
through coolant.
E-SCFC 90°
order number catalogue number D D min F L1 A aF° aP°
gage
insert
insert
screw Torx
right hand
2023600 E08KSCFCR06 8 11,0 6,0 125 3,0 -12.0 0.0 CC..060204 12148036300 T8
left hand
2031019 E08KSCFCL06 8 11,0 6,0 125 3,0 -12.0 0.0 CC..060204 12148036300 T8
See pages B30–B46
for inserts.
Carbide shank with
through coolant.
Steel Shank with Through Coolant
WID_Master16_Turning_Holders_C066_C067_Metric_REBRAND.indd 66 11/11/15 9:24 AM
C67
LViWID M 16 T i H ld C066 C067 M i REBRANDN b 11 20157 39AM
widia.com
S-Style Clamping Boring Bars for Positive Inserts
Carbide Shank with Through Coolant
E-SCFP 90°
order number catalogue number D D min F L1 A A1 aF°
gage
insert
insert
screw Torx
right hand
2010047 E06JSCFPR04 6 8,0 4,5 110,0 2,0 1,4 -10.0 CP..04T104 12148005800 T6
5092759 E08KSCFPR06A 8 11,0 6,0 123,0 2,4 — -8.0 CP..060204 MS1939 T7
5092921 E10MSCFPR06A 10 13,0 7,0 148,0 3,2 — -4.0 CP..060204 MS1939 T7
5092923 E12QSCFPR06 12 16,0 9,0 177,5 4,8 — -3.0 CP..060204 MS1153 T7
left hand
2031018 E06JSCFPL04 6 8,0 4,5 110,0 2,0 1,4 -10.0 CP..04T104 12148005800 T6
5092757 E08KSCFPL06A 8 11,0 6,0 123,0 2,4 — -8.0 CP..060204 MS1939 T7
5092920 E10MSCFPL06A 10 13,0 7,0 148,0 3,2 — -4.0 CP..060204 MS1939 T7
5092922 E12QSCFPL06 12 16,0 9,0 177,5 4,8 — -3.0 CP..060204 MS1153 T7
A-SCLC 95°
order number catalogue number D D min F L1 A CS aF°
gage
insert shim
shim
screw hex
insert
screw Torx
right hand
3883285 A08JSCLCR06 8 11,0 6,0 110 2,4 — -8.0 CC..060204 ———MS1939 T7
3883283 A10KSCLCR06 10 13,0 7,0 125 3,2 — -7.0 CC..060204 ———MS1153 T7
3883271 A16RSCLCR09 16 20,0 11,0 200 — 1/8-27 NPT -7.0 CC..09T308 ———MS1155 T15
3883269 A20SSCLCR09 20 25,0 13,0 250 4,0 1/8-27 NPT -5.0 CC..09T308 ———MS1155 T15
3883265 A25TSCLCR12 25 32,0 17,0 300 6,4 1/4-18 NPT -7.0 CC..120408 ———MS1157 T15
3883266 A32TSCLCR12 32 40,0 22,0 300 6,4 1/4-18 NPT -7.0 CC..120408 SKCP453 SRS4 4 mm MS1158 T15
left hand
3883286 A08JSCLCL06 8 11,0 6,0 110 2,4 — -8.0 CC..060204 ———MS1939 T7
3883284 A10KSCLCL06 10 13,0 7,0 125 3,2 — -7.0 CC..060204 ———MS1153 T7
3883272 A16RSCLCL09 16 20,0 11,0 200 4,0 1/8-27 NPT -7.0 CC..09T308 ———MS1155 T15
3883270 A20SSCLCL09 20 25,0 13,0 250 — 1/8-27 NPT -5.0 CC..09T308 ———MS1155 T15
3883267 A25TSCLCL12 25 32,0 17,0 300 6,4 1/4-18 NPT -7.0 CC..120408 ———MS1157 T15
3883268 A32TSCLCL12 32 40,0 22,0 300 6,4 1/4-18 NPT -7.0 CC..120408 SKCP453 SRS4 4 mm MS1158 T15
Tools for External Turning and Internal Boring
Carbide shank with
through coolant.
Steel shank with
through coolant.
See pages B30–B46
for inserts.
See pages B30–B46
for inserts.
Steel Shank with Through Coolant
WID_Master16_Turning_Holders_C066_C067_Metric_REBRAND.indd 67 11/11/15 9:24 AM
C68
LViWID M 16 T i H ld C068 C069 M i REBRAND O b 15 2015 10 03 AM
widia.com
S-Style Clamping Boring Bars for Positive Inserts
Carbide Shank with Through Coolant
E-SCLC 95°
order number catalogue number D D min F L1 A CS aF° aP°
gage
insert
insert
screw Torx
right hand
2010068 E08KSCLCR06 8 11,0 6,0 125 3,0 — -12.0 0.0 CC..060204 12148036300 T8
2023603 E08KSCLCR065 8 10,0 5,0 125 3,0 — -15.0 0.0 CC..060204 12148036300 T8
2031021 E10MSCLCR06 10 13,0 7,0 150 3,5 — -10.0 0.0 CC..060204 12148068700 T8
2023608 E12QSCLCR06 12 16,0 9,0 180 4,5 — -8.0 0.0 CC..060204 12148068700 T8
2010139 E16RSCLCR09 16 20,0 11,0 200 4,5 — -7.0 0.0 CC..090308 12148038800 T15
2023614 E16RSCLCR09T3 16 20,0 11,0 200 4,5 — -7.0 0.0 CC..09T308 12148038800 T15
2023621 E20SSCLCR09 20 25,0 13,0 250 — G 1/8 -5.0 0.0 CC..090308 12148038800 T15
2010184 E20SSCLCR09T3 20 25,0 13,0 250 — G 1/8 -5.0 0.0 CC..09T308 12148038800 T15
2031029 E25TSCLCR09 25 32,0 17,0 300 — G 1/4 -3.0 0.0 CC..090308 12148038800 T15
2010224 E25TSCLCR09T3 25 32,0 17,0 300 — G 1/4 -3.0 0.0 CC..09T308 12148038800 T15
2023632 E32USCLCR12 32 40,0 22,0 350 — G 1/4 -10.0 0.0 CC..120408 MS2260 T20
left hand
2023601 E08KSCLCL06 8 11,0 6,0 125 3,0 — -12.0 0.0 CC..060204 12148036300 T8
2031020 E08KSCLCL065 8 10,0 5,0 125 3,0 — -15.0 0.0 CC..060204 12148036300 T8
2031022 E10MSCLCL06 10 13,0 7,0 150 3,5 — -10.0 0.0 CC..060204 12148036300 T8
2023607 E12QSCLCL06 12 16,0 9,0 180 4,5 — -8.0 0.0 CC..060204 12148068700 T8
2023613 E16RSCLCL09 16 20,0 11,0 200 4,5 — -7.0 0.0 CC..090308 12148038800 T15
2023615 E16RSCLCL09T3 16 20,0 11,0 200 4,5 — -7.0 0.0 CC..09T308 12148038800 T15
2031026 E20SSCLCL09 20 25,0 13,0 250 — G 1/8 -5.0 0.0 CC..090308 12148038800 T15
2031027 E20SSCLCL09T3 20 25,0 13,0 250 — G 1/8 -5.0 0.0 CC..09T308 12148038800 T15
2010215 E25TSCLCL09 25 32,0 17,0 300 — G 1/4 -3.0 0.0 CC..090308 12148038800 T15
2031028 E25TSCLCL09T3 25 32,0 17,0 300 — G 1/4 -3.0 0.0 CC..09T308 12148038800 T15
Tools for External Turning and Internal Boring
See pages B30–B46
for inserts.
Carbide shank with
through coolant.
WID_Master16_Turning_Holders_C068_C069_Metric_REBRAND.indd 68 10/30/15 3:08 PM
C69
LViWID M 16 T i H ld C068 C069 M i REBRANDO b 15 201510 03AM
widia.com
S-Style Clamping Boring Bars for Positive Inserts
Steel Shank with Through Coolant
A-SCLP 95°
order number catalogue number D D min F L1 A CS aF°
gage
insert
insert
screw Torx
right hand
5077640 A08JSCLPR06 8 11,0 6,0 110 2,4 — -6.0 CP..0602.. MS1939 T7
5077645 A10KSCLPR06 10 13,0 7,0 125 3,2 — -4.0 CP..0602.. MS1939 T7
5077681 A12MSCLPR06 12 16,0 9,0 150 4,0 — -3.0 CP..0602.. MS1153 T7
5077694 A16RSCLPR06 16 20,0 11,0 200 — 1/8 - 27 NPT -5.0 CC..0602.. MS1153 T7
5077695 A16RSCLPR09 16 20,0 11,0 200 4,0 1/8 - 27 NPT -4.0 CP..09T308 MS1155 T15
5077722 A20SSCLPR09 20 25,0 13,0 250 — 1/8 - 27 NPT -2.0 CP..09T3.. MS1155 T15
left hand
5077619 A08JSCLPL06 8 11,0 6,0 110 2,4 — -6.0 CP..0602.. MS1939 T7
5077644 A10KSCLPL06 10 13,0 7,0 125 3,2 — -4.0 CP..0602.. MS1939 T7
5077680 A12MSCLPL06 12 16,0 9,0 150 4,0 — -3.0 CP..0602.. MS1153 T7
5077688 A16RSCLPL06 16 20,0 11,0 200 — 1/8 - 27 NPT -5.0 CC..0602.. MS1153 T7
5077692 A16RSCLPL09 16 20,0 11,0 200 — 1/8 - 27 NPT -4.0 CP..09T3.. MS1155 T15
5077721 A20SSCLPL09 20 25,0 13,0 250 — 1/8 - 27 NPT -2.0 CP..09T3.. MS1155 T15
Tools for External Turning and Internal Boring
Steel shank with
through coolant.
See pages B30–B46
for inserts.
WID_Master16_Turning_Holders_C068_C069_Metric_REBRAND.indd 69 10/30/15 3:08 PM
C70
LViWID M 16 T i H ld C070 C071 M i REBRAND O b 15 2015 10 03 AM
widia.com
S-Style Clamping Boring Bars for Positive Inserts
Carbide Shank with Through Coolant
E-SCLP 95°
order number catalogue number D D min F L1 A aF°
gage
insert
insert
screw Torx
right hand
2023598 E06JSCLPR04 6 8,0 4,5 110 2,0 -10.0 CP..04T104 12148005800 T6
5093094 E08KSCLPR06A 8 11,0 6,0 122 2,4 -6.0 CP..060204 MS1939 T7
5093098 E10MSCLPR06A 10 13,0 7,0 149 3,2 -4.0 CP..060204 MS1939 T7
5093144 E12QSCLPR06 12 16,0 9,0 178 4,8 -3.0 CP..060204 MS1153 T7
5093181 E16RSCLPR09 16 20,0 11,0 201 5,5 -4.0 CP..09T308 MS1155 T15
5093185 E20SSCLPR09 20 25,0 13,0 250 7,1 -2.0 CP..09T308 MS1155 T15
left hand
2023597 E06JSCLPL04 6 8,0 4,5 110 2,0 -10.0 CP..04T104 12148005800 T6
5093093 E08KSCLPL06A 8 11,0 6,0 122 2,4 -6.0 CP..060204 MS1939 T7
5093097 E10MSCLPL06A 10 13,0 7,0 149 3,2 -4.0 CP..060204 MS1939 T7
5093143 E12QSCLPL06 12 16,0 9,0 178 4,8 -3.0 CP..060204 MS1153 T7
5093149 E16RSCLPL09 16 20,0 11,0 201 5,5 -4.0 CP..09T308 MS1155 T15
5093184 E20SSCLPL09 20 25,0 13,0 250 7,1 -2.0 CP..09T308 MS1155 T15
Tools for External Turning and Internal Boring
See pages B30–B46
for inserts.
Carbide shank with
through coolant.
WID_Master16_Turning_Holders_C070_C071_Metric_REBRAND.indd 70 10/30/15 3:08 PM
C71
LViWID M 16 T i H ld C070 C071 M i REBRANDO b 15 201510 03AM
widia.com
S-Style Clamping Boring Bars for Positive Inserts
Steel Shank with Through Coolant
A-SDQC 107,5°
order number catalogue number D D min F L1 CS aF°
gage
insert
insert
screw Torx
right hand
3883476 A16RSDQCR07 16 20,0 11,0 200 1/8-27 NPT -5.0 DC..070204 MS1153 T7
3883474 A20SSDQCR11 20 25,0 13,0 250 1/8-27 NPT -5.0 DC..11T308 MS1155 T15
3883462 A25TSDQCR11 25 32,0 17,0 300 1/4-18 NPT -4.0 DC..11T308 MS1155 T15
left hand
3883477 A16RSDQCL07 16 20,0 11,0 200 1/8-27 NPT -5.0 DC..070204 MS1153 T7
3883475 A20SSDQCL11 20 25,0 13,0 250 1/8-27 NPT -5.0 DC..11T308 MS1155 T15
3883473 A25TSDQCL11 25 32,0 17,0 300 1/4-18 NPT -4.0 DC..11T308 MS1155 T15
Tools for External Turning and Internal Boring
Steel shank with
through coolant.
See pages B47–B64
for inserts.
WID_Master16_Turning_Holders_C070_C071_Metric_REBRAND.indd 71 10/30/15 3:08 PM
C72
LViWID M 16 T i H ld C072 C073 M i REBRAND O b 15 2015 10 03 AM
widia.com
S-Style Clamping Boring Bars for Positive Inserts
Carbide Shank with Through Coolant
E-SDQC 107,5°
order number catalogue number D D min F L1 A CS aF° aP°
gage
insert
insert
screw Torx
right hand
2010111 E12QSDQCR07 12 16,0 9,0 180 4,5 — -7.0 0.0 DC..070204 12148080000 T8
2031025 E16RSDQCR07 16 20,0 11,0 200 5,5 — -5.0 0.0 DC..070204 12148080000 T8
2023623 E20SSDQCR11 20 25,0 13,0 250 — G 1/8 -7.0 0.0 DC..11T308 12148038800 T15
left hand
2031023 E12QSDQCL07 12 16,0 9,0 180 4,5 — -7.0 0.0 DC..070204 12148080000 T8
2010148 E16RSDQCL07 16 20,0 11,0 200 5,5 — -5.0 0.0 DC..070204 12148080000 T8
2023622 E20SSDQCL11 20 25,0 13,0 250 — G 1/8 -7.0 0.0 DC..11T308 12148038800 T15
A-SDQP
order number catalogue number D D min F L1 CS aF°
gage
insert
insert
screw Torx
right hand
5078292 A12MSDQPR07 12 16,0 9,0 150 1/16-27 NPT 2.0 DP..0702.. MS1153 T7
5078295 A16RSDQPR07 16 20,0 11,0 200 1/8-27 NPT 0.0 DP..0702.. MS1153 T7
5078298 A20SSDQPR11 20 25,0 13,0 250 1/8-27 NPT 2.0 DP..11T3.. MS1155 T15
5078320 A25TSDQPR11 25 32,0 17,0 300 1/4-18 NPT 0.0 DP..11T3.. MS1155 T15
left hand
5078291 A12MSDQPL07 12 16,0 9,0 150 1/16-27 NPT 2.0 DP..0702.. MS1153 T7
5078293 A16RSDQPL07 16 20,0 11,0 200 1/8-27 NPT 0.0 DP..0702.. MS1153 T7
5078296 A20SSDQPL11 20 25,0 13,0 250 1/8-27 NPT 2.0 DP..11T3.. MS1155 T15
5078299 A25TSDQPL11 25 32,0 17,0 300 1/4-18 NPT 0.0 DP..11T3.. MS1155 T15
Tools for External Turning and Internal Boring
See pages B47–B64
for inserts.
See pages B47–B64
for inserts.
Carbide shank with
through coolant.
Steel shank with
through coolant.
Steel Shank with Through Coolant
WID_Master16_Turning_Holders_C072_C073_Metric_REBRAND.indd 72 10/30/15 3:08 PM
C73
LViWID M 16 T i H ld C072 C073 M i REBRANDO b 15 201510 03AM
widia.com
S-Style Clamping Boring Bars for Positive Inserts
Steel Shank with Through Coolant
A-SDUC 93°
order number catalogue number D D min F L1 A CS aF°
gage
insert shim
shim
screw hex
insert
screw Torx
right hand
3883297 A10KSDUCR07 10 13,0 7,0 125 3,2 — -7.0 DC..070204 ———MS1153 T7
3883294 A16RSDUCR07 16 20,0 11,0 200 — 1/8-27 NPT -4.0 DC..070204 ———MS1153 T7
3883293 A16RSDUCR11 16 20,0 11,0 200 — 1/8-27 NPT -6.0 DC..11T308 ———MS1155 T15
3883291 A20SSDUCR11 20 25,0 13,0 250 — 1/8-27 NPT -5.0 DC..11T308 ———MS1155 T15
3883288 A25TSDUCR11 25 32,0 17,0 300 — 1/8-27 NPT -4.0 DC..11T308 ———MS1155 T15
3883287 A32TSDUCR15 32 40,0 22,0 300 — 1/8-27 NPT -7.0 DC..150408 SKDP453 SRS4 4 mm MS1158 T15
left hand
3883298 A10KSDUCL07 10 13,0 7,0 125 3,2 — -7.0 DC..070204 ———MS1153 T7
3883296 A16RSDUCL07 16 20,0 11,0 200 — 1/8-27 NPT -4.0 DC..070204 ———MS1153 T7
3883295 A16RSDUCL11 16 20,0 11,0 200 — 1/8-27 NPT -6.0 DC..11T308 ———MS1155 T15
3883292 A20SSDUCL11 20 25,0 13,0 250 — 1/8-27 NPT -5.0 DC..11T308 ———MS1155 T15
3883290 A25TSDUCL11 25 32,0 17,0 300 — 1/8-27 NPT -4.0 DC..11T308 ———MS1155 T15
3883289 A32TSDUCL15 32 40,0 22,0 300 — 1/8-27 NPT -7.0 DC..150408 SKDP453 SRS4 4 mm MS1158 T15
Tools for External Turning and Internal Boring
Steel shank with
through coolant.
See pages B47–B64
for inserts.
WID_Master16_Turning_Holders_C072_C073_Metric_REBRAND.indd 73 10/30/15 3:08 PM
widia.com
C74
LViWID M 16 T i H ld C074 C075 M i REBRAND O b 15 2015 10 04 AM
S-Style Clamping Boring Bars for Positive Inserts
Carbide Shank with Through Coolant
E-SDUC 93°
order number catalogue number D D min F L1 A CS aF° aP°
gage
insert
insert
screw Torx
right hand
2023611 E12QSDUCR07 12 16,0 9,0 180 4,5 — -7.0 0.0 DC..070204 12148068700 T8
2010157 E16RSDUCR07 16 20,0 11,0 200 4,5 — -5.0 0.0 DC..070204 12148080000 T8
2023624 E20SSDUCR11 20 25,0 13,0 250 — G 1/8 -7.0 0.0 DC..11T308 12148038800 T15
2023630 E25TSDUCR11 25 32,0 17,0 300 — G 1/4 -5.0 0.0 DC..11T308 12148038800 T15
left hand
2023610 E12QSDUCL07 12 16,0 9,0 180 4,5 — -7.0 0.0 DC..070204 12148068700 T8
2023617 E16RSDUCL07 16 20,0 11,0 200 4,5 — -5.0 0.0 DC..070204 12148080000 T8
2010193 E20SSDUCL11 20 25,0 13,0 250 — G 1/8 -7.0 0.0 DC..11T308 12148038800 T15
2023629 E25TSDUCL11 25 32,0 17,0 300 — G 1/4 -5.0 0.0 DC..11T308 12148038800 T15
Tools for External Turning and Internal Boring
See pages B47–B64
for inserts.
Carbide shank with
through coolant.
WID_Master16_Turning_Holders_C074_C075_Metric_REBRAND.indd 74 10/30/15 3:08 PM
widia.com C75
LViWID M 16 T i H ld C074 C075 M i REBRANDO b 15 201510 04AM
S-Style Clamping Boring Bars for Positive Inserts
Steel Shank with Through Coolant
A-SDUP 93°
order number catalogue number D D min F L1 CS aF°
gage
insert
insert
screw Torx
right hand
5078360 A12MSDUPR07 12 16,0 9,0 150 1/16-27 NPT -2.0 DP..070204 MS1153 T7
5078364 A16RSDUPR07 16 20,0 11,0 200 1/8-27 NPT 0.0 DP..070204 MS1153 T7
5078368 A20SSDUPR11 20 25,0 13,0 250 1/8-27 NPT -2.0 DP..11T308 MS1155 T15
5078376 A25TSDUPR11 25 32,0 17,0 300 1/4-18 NPT 0.0 DP..11T308 MS1155 T15
left hand
5078329 A12MSDUPL07 12 16,0 9,0 150 1/16-27 NPT -2.0 DP..070204 MS1153 T7
5078363 A16RSDUPL07 16 20,0 11,0 200 1/8-27 NPT 0.0 DP..070204 MS1153 T7
5078367 A20SSDUPL11 20 25,0 13,0 250 1/8-27 NPT -2.0 DP..11T308 MS1155 T15
5078375 A25TSDUPL11 25 32,0 17,0 300 1/4-18 NPT 0.0 DP..11T308 MS1155 T15
E-SDUP 93°
order number catalogue number D D min F L1 A aF°
gage
insert
insert
screw Torx
right hand
5093591 E12QSDUPR07 12 16,0 9,0 179 4,8 -2.0 DP..070204 MS1153 T7
5093634 E16RSDUPR07 16 20,0 11,0 199 5,5 0.0 DP..070204 MS1153 T7
5093639 E20SSDUPR11 20 25,0 13,0 253 7,1 -2.0 DP..11T308 MS1155 T15
left hand
5093429 E12QSDUPL07 12 16,0 9,0 179 4,8 -2.0 DP..070204 MS1153 T7
5093633 E16RSDUPL07 16 20,0 11,0 199 5,5 0.0 DP..070204 MS1153 T7
5093638 E20SSDUPL11 20 25,0 13,0 253 7,1 -2.0 DP..11T308 MS1155 T15
Tools for External Turning and Internal Boring
See pages B47–B64
for inserts.
Carbide shank with
through coolant.
Steel shank with
through coolant.
See pages B47–B64
for inserts.
Carbide Shank with Through Coolant
WID_Master16_Turning_Holders_C074_C075_Metric_REBRAND.indd 75 10/30/15 3:09 PM
C76
LViWID M 16 T i H ld C076 C077 M i REBRAND O b 30 2015 10 56 AM
widia.com
A-STFC 90°
order number catalogue number D D min F L1 A aF°
gage
insert
insert
screw Torx
right hand
3883382 A10KSTFCR11 10 13,0 7,0 125 3,2 -7.0 TC..110204 MS1153 T7
left hand
3883443 A10KSTFCL11 10 13,0 7,0 125 3,2 -7.0 TC..110204 MS1153 T7
See pages B81–B93
for inserts.
Steel shank with
through coolant.
A-SDXP 95°
order number catalogue number D D min F L1 L CD CS
gage
insert
insert
screw Torx
right hand
5078401 A12MSDXPR07 12 16,0 9,0 150 162,0 3,09 1/16-27 NPT DP..070204 MS1153 T7
5078405 A16RSDXPR07 16 20,0 11,0 200 212,0 3,20 1/8-27 NPT DP..070204 MS1153 T7
5078430 A20SSDXPR11 20 25,0 13,0 250 270,0 4,31 1/8-27 NPT DP..11T308 MS1155 T15
left hand
5078400 A12MSDXPL07 12 16,0 9,0 150 162,0 3,09 1/16-27 NPT DP..070204 MS1153 T7
5078404 A16RSDXPL07 16 20,0 11,0 200 212,0 3,20 1/8-27 NPT DP..070204 MS1153 T7
5078409 A20SSDXPL11 20 25,0 13,0 250 270,0 4,31 1/8-27 NPT DP..11T308 MS1155 T15
Steel shank with
through coolant.
See pages B47–B64
for inserts.
S-Style Clamping Boring Bars for Positive Inserts
Steel Shank with Through Coolant
Tools for External Turning and Internal Boring
WID_Master16_Turning_Holders_C076_C077_Metric_REBRAND.indd 76 10/30/15 3:09 PM
C77
LViWID M 16 T i H ld C076 C077 M i REBRANDO b 30 201510 56AM
widia.com
S-Style Clamping Boring Bars for Positive Inserts
Carbide Shank with Through Coolant
E-STFC 90°
order number catalogue number D D min F L1 A CS aF°
gage
insert
insert
screw Torx
right hand
2031888 E10MSTFCR11 10 13,0 7,0 150 3,5 — -10.0 TC..110204 12148068700 T8
2031024 E12QSTFCR11 12 16,0 9,0 180 4,5 — -8.0 TC..110204 12148068700 T8
2010174 E16RSTFCR16 16 20,0 11,0 200 4,5 — -9.0 TC..16T308 12148038800 T15
2023626 E20SSTFCR16 20 25,0 13,0 250 — G 1/8 -7.0 TC..16T308 12148038800 T15
2023631 E25TSTFCR16 25 32,0 17,0 300 — G 1/4 -5.0 TC..16T308 12148038800 T15
left hand
2010090 E10MSTFCL11 10 13,0 7,0 150 3,5 — -10.0 TC..110204 12148068700 T8
2010120 E12QSTFCL11 12 16,0 9,0 180 4,5 — -8.0 TC..110204 12148068700 T8
2023618 E16RSTFCL16 16 20,0 11,0 200 4,5 — -9.0 TC..16T308 12148038800 T15
2023625 E20SSTFCL16 20 25,0 13,0 250 — G 1/8 -7.0 TC..16T308 12148038800 T15
2010233 E25TSTFCL16 25 32,0 17,0 300 — G 1/4 -5.0 TC..16T308 12148038800 T15
Tools for External Turning and Internal Boring
Carbide shank with
through coolant.
See pages B81–B93
for inserts.
WID_Master16_Turning_Holders_C076_C077_Metric_REBRAND.indd 77 10/30/15 3:09 PM
C78
LViWID M 16 T i H ld C078 C079 M i REBRAND O b 15 2015 10 04 AM
widia.com
S-Style Clamping Boring Bars for Positive Inserts
Steel Shank with Through Coolant
A-STFP 90°
order number catalogue number D D min F L1 A CS aF°
gage
insert
insert
screw Torx
right hand
5086726 A08JSTFPR09 8 11,0 6,0 110 — — -8.0 TP..090204 MS1933 T7
3883446 A10KSTFPR11 10 13,0 7,0 125 3,2 — -4.0 TP..110204 MS1153 T7
5086802 A12MSTFPR11 12 16,0 9,0 150 4,0 — -2.0 TP..110204 MS1153 T7
3883444 A16RSTFPR11 16 20,0 11,0 200 — 1/16-27 NPT 0.0 TP..110204 MS1153 T7
5086807 A20SSTFPR16 20 25,0 13,0 250 — — -2.0 TP..16T308 MS1155 T15
5086809 A25TSTFPR16 25 32,0 17,0 300 6,4 1/4-18 NPT 0.0 TP..16T308 MS1155 T15
left hand
5086724 A08JSTFPL09 8 11,0 6,0 110 — — -8.0 TP..090204 MS1933 T7
3883447 A10KSTFPL11 10 13,0 7,0 125 3,2 — -4.0 TP..110204 MS1153 T7
5086800 A12MSTFPL11 12 16,0 9,0 150 4,0 — -2.0 TP..110204 MS1153 T7
3883445 A16RSTFPL11 16 20,0 11,0 200 — 1/16-27 NPT 0.0 TP..110204 MS1153 T7
5086806 A20SSTFPL16 20 25,0 13,0 250 — — -2.0 TP..16T308 MS1155 T15
5086808 A25TSTFPL16 25 32,0 17,0 300 6,4 1/4-18 NPT 0.0 TP..16T308 MS1155 T15
Tools for External Turning and Internal Boring
See pages B81–B93
for inserts.
Steel shank with
through coolant.
WID_Master16_Turning_Holders_C078_C079_Metric_REBRAND.indd 78 10/30/15 3:09 PM
C79
LViWID M 16 T i H ld C078 C079 M i REBRANDO b 15 201510 04AM
widia.com
S-Style Clamping Boring Bars for Positive Inserts
Carbide Shank with Through Coolant
E-STFP 90°
order number catalogue number D D min F L1 A aF°
gage
insert
insert
screw Torx
right hand
5093696 E08KSTFPR09A 8 11,0 6,0 124 2,4 -6.0 TP..090204 MS1933 T7
5093750 E10MSTFPR11A 10 13,0 7,0 152 3,2 -4.0 TP..110204 MS1153 T7
5093755 E12QSTFPR11 12 16,0 9,0 181 4,8 -2.0 TP..110204 MS1153 T7
5093759 E16RSTFPR11 16 20,0 11,0 201 5,5 0.0 TP..110204 MS1153 T7
5093773 E20SSTFPR16 20 25,0 13,0 251 7,1 -2.0 TP..16T308 MS1155 T15
left hand
5093694 E08KSTFPL09A 8 11,0 6,0 124 2,4 -6.0 TP..090204 MS1933 T7
5093699 E10MSTFPL11A 10 13,0 7,0 152 3,2 -4.0 TP..110204 MS1153 T7
5093754 E12QSTFPL11 12 16,0 9,0 181 4,8 -2.0 TP..110204 MS1153 T7
5093758 E16RSTFPL11 16 20,0 11,0 201 5,5 0.0 TP..110204 MS1153 T7
5093772 E20SSTFPL16 20 25,0 13,0 251 7,1 -2.0 TP..16T308 MS1155 T15
Tools for External Turning and Internal Boring
Carbide shank with
through coolant.
See pages B81–B93
for inserts.
WID_Master16_Turning_Holders_C078_C079_Metric_REBRAND.indd 79 10/30/15 3:09 PM
C80
LViWID M 16 T i H ld C080 C081 M i REBRAND O b 15 2015 10 04 AM
widia.com
S-Style Clamping Boring Bars for Positive Inserts
Steel Shank with Through Coolant
A-STWP 60°
order number catalogue number D D min F L1 L1A A aF°
gage
insert
insert
screw Torx
right hand
5086811 A12MSTWPR11 12 16,0 9,0 150 — — -2.0 TP..110204 MS1153 T7
5086813 A16RSTWPR11 16 20,0 11,0 200 — — -2.0 TP..110204 MS1153 T7
left hand
3883449 A10KSTWPL11 10 13,0 7,0 125 5,0 3,2 -4.0 TP..110204 MS1153 T7
5086810 A12MSTWPL11 12 16,0 9,0 150 — — -2.0 TP..110204 MS1153 T7
5086812 A16RSTWPL11 16 20,0 11,0 200 — — -2.0 TP..110204 MS1153 T7
A-SVQB 107,5°
order number catalogue number D D min F L1 CS aF°
gage
insert
insert
screw Torx
right hand
3883436 A16RSVQBR11 16 20,0 11,0 200 1/8-27 NPT -7.0 VB..110304 MS1153 T7
3883434 A25TSVQBR16 25 32,0 17,0 300 1/4-18 NPT -6.0 VB..160408 MS1155 T15
left hand
3883435 A25TSVQBL16 25 32,0 17,0 300 1/4-18 NPT -6.0 VB..160408 MS1155 T15
Tools for External Turning and Internal Boring
See pages B81–B93
for inserts.
See pages B94–B99
for inserts.
Steel shank with
through coolant.
Steel shank with
through coolant.
WID_Master16_Turning_Holders_C080_C081_Metric_REBRAND.indd 80 10/30/15 3:09 PM
C81
LViWID M 16 T i H ld C080 C081 M i REBRANDO b 15 201510 04AM
widia.com
S-Style Clamping Boring Bars for Positive Inserts
Steel Shank with Through Coolant
A-SVUB 93°
order number catalogue number D D min F L1 CS
gage
insert
insert
screw Torx
right hand
3883440 A20SSVUBR11 20 25,0 13,0 250 1/8-27 NPT VB..110304 MS1153 T7
3883438 A25TSVUBR16 25 32,0 17,0 300 1/4-18 NPT VB..160408 MS1155 T15
left hand
3883439 A25TSVUBL16 25 32,0 17,0 300 1/4-18 NPT VB..160408 MS1155 T15
Tools for External Turning and Internal Boring
See pages B94–B99
for inserts.
Steel shank with
through coolant.
WID_Master16_Turning_Holders_C080_C081_Metric_REBRAND.indd 81 10/30/15 3:09 PM
C82 widia.com
Comprehensive offering of KM Quick Change
cutting units. See WIDIA™ Tooling Systems
Catalogue (A-09-02122) for KM adaptors.
Tunable Boring Bars with Front End
KM™ Quick Change Adaptor
Adjustment screw to allow for on-machine tuning.
Allows each bar to be setup for the specifi c operation.
Available in either steel or carbide shanks:
• Steel
— 40–100mm
• Carbide
— 50–100mm
Tunable Boring Bars
Reduce vibrations and enhance productivity in deep boring applications
with KM Quick Change heads and tunable boring bars.
WID_Master16_Turning_Holders_C082_C083_Metric_REBRAND.indd 82 11/11/15 5:36 PM
C83
widia.com
Tuning Procedure
1. Loosen the two locking screws on the bar.
2. Turn the adjusting screw in the positive direction until it becomes snug. The adjusting screw
becomes snug when it locks the tuner mass.
3. Turn the screw one complete turn in the negative direction and take a test cut.
4. Repeat Step 3 until chatter is eliminated.
5. Once chatter is eliminated, note that chatter starts between the current screw setting and one turn in the positive
direction. Make 1/4 turn adjustments within this range, taking test cuts for each setting, until you can identify the
adjusting screw setting that causes chatter to start.
6. Once the adjusting screw setting that causes chatter is determined, back the adjusting screw
off a 1/2 turn in the negative direction.
7. Tighten both clamping screws and take a test cut to confi rm desired results.
Features Function Benefi t
Robust internal clamping package • Eliminates chatter and vibration.
• Higher metal removal rate.
• Larger depths of cut.
• High surface quality.
• Low scrap rate.
• Increased productivity.
• Reduced noise exposure.
Tunable clamping mechanism Bar can be tuned on the machine with just turning a screw. Optimised damping characteristics for all kinds of
machining conditions.
KM™ Quick Change front end adaptor • Ridged clamping system.
• Wide selection of KM Quick Change
cutting units.
Flexible system reduces tooling inventory
and setup times.
WID_Master16_Turning_Holders_C082_C083_Metric_REBRAND.indd 83 11/11/15 5:36 PM
widia.com
C84
LViWID M 16 T i H ld C084 C085 M i REBRAND N b 11 2015 11 44 AM
Tunable Boring Bars
Tunable steel shank with through coolant and front end KM™ clamping unit.
Steel Shank • Carbide Shank
D...TTB-KM • Metric
order number catalogue number D L1 CS L12 L1 min
CSWS
system size
3637636 D40MTTB560KM40 40 520 RP 3/8-19 305 330 KM40
3637637 D50MTTB737KM40 50 697 RP 3/8-19 470 337 KM40
3637638 D60MTTB1000KM40 60 976 RP 3/8-19 686 396 KM40
3642134 D80MTTB1120KM63 80 1060 RP 3/8-19 610 560 KM63
3642135 D100MTTB1330KM63 100 1384 RP 3/8-19 622 695 KM63
Carbide tunable boring bar with KM™ Quick Change connection.
G-KM-TTB • Metric
order number catalogue number D L1 CS L12
CSWS
system size
3954298 G50MTTB1026KM40 50 986 RP 3/8-19 300 KM40
3954299 G60MTTB1226KM40 60 1186 RP 3/8-19 381 KM40
3954300 G80MTTB1564KM63 80 1504 RP 3/8-19 480 KM63
3954301 G100MTTB2066KM63 100 1975 RP 3/8-19 600 KM63
Tools for External Turning and Internal Boring
NOTE: KM adaptors can be found in the WIDIA
™
Tooling Systems Catalogue (A-09-02122EN).
NOTE: KM adaptors can be found in the WIDIA
™
Tooling Systems Catalogue (A-09-02122EN).
WID_Master16_Turning_Holders_C084_C085_Metric_REBRAND.indd 84 11/11/15 5:36 PM
To learn more, contact your local Authorised Distributor or visit widia.com.
• Insert widths 2–4mm.
• Toolholder shank sizes 10–31,75mm.
• Cut-off up to 76mm bar capacity.
• Quick, reliable insert indexing.
• Positive mechanical clamping.
• CNC square shank, screw machine, and PL blade-style toolholders.
Specifi cally engineered to deliver toolholder fl exibility
with integral, component, universal, and blade-style designs.
Separator™
Toolholders
and Inserts
WID_Master16_Turning_Holders_C084_C085_Metric_REBRAND.indd 85 11/11/15 5:36 PM
C86 widia.com
Clamping System M Clamping System P
• Combined pin/wedge clamp for negative inserts.
• An extremely sturdy clamping system, specially
designed for interrupted cuts.
• The tool is protected by a carbide shim.
• Lever-type clamping system for negative
indexable inserts with hole to DIN 4988
and positive round inserts more than
20mm in diameter.
• Inserts with one- and two-side chip control
geometries have positive rakes from 6° to 18°.
• Advantages of this system are fast insert
changes and no interference with chip fl ow.
P-style available in metric sizes only.
Cartridges
Modern machining operations demand high-quality, high-performance
toolholders that provide straightforward design and application versatility.
Standard WIDIA™ cartridges are ideal for turning tools with one, or several,
cutting edges. A wide range of cartridge sizes and styles provide numerous
combinations and application possibilities.
WID_Master16_Turning_Holders_C086_C087_Metric_REBRAND.indd 86 11/11/15 5:36 PM
LViWID M 16 T i H ld C086 C087 M i REBRANDN b 11 201511 52AM
C87
widia.com
Clamping System C Clamping System S
• Top clamping system for negative and
positive indexable inserts to DIN 4968.
• This universal clamping system is robust
and easy to handle.
• Some height-adjustable clamps enable
the use of additional chipbreakers.
• A carbide shim provides additional
tool protection.
• Screw clamping system for positive indexable inserts
with countersunk hole to DIN 4967.
• Compact design using a minimum of spare parts
for high reliability and cost effi ciency.
• A carbide shim provides additional tool protection.
• Toolholders with cutting edge heights upwards of
16mm (.625") and insert iCs from 9,52mm (.375")
are secured by means of a threaded bushing.
Same clamping systems as standard
turning toolholders.
Overall sizes to DIN and ISO are ideal for
single- and multi-tooth turning, boring,
and spotting tools.
Simple and secure mounting
to the tool by a single cartridge
clamping screw.
High accuracy on “F” dimension
ensures proper application to
minimum bore dimensions.
Precise axial and radial positioning
by adjustment screws.
WID_Master16_Turning_Holders_C086_C087_Metric_REBRAND.indd 87 11/11/15 5:36 PM
C88 widia.com
How Do Catalogue Numbers Work?
Each character in our catalogue number signi es a speci c trait of that
product. Use the following key columns and corresponding images
to easily identify which attributes apply.
Cartridges
Catalogue Numbering System
MCFNR10CA3
MCFN R
Insert
Clamping System
Insert Shape Cartridge
Style
Insert Clearance
Angle
Hand of Tool
C
C F K C
Right-hand cartridge
Top clamping by clamping
nger for inserts without hole.
DL J N
R Q R P
S S G Left-hand cartridge
T
W
Top and hole clamping
for inserts with hole.
S
Centre clamping by screw
for inserts with hole.
R
L
M
P
Insert clamping by toggle lever
for insert hole.
WID_Master16_Turning_Holders_C088_C089_Metric_REBRAND.indd 88 10/30/15 3:09 PM
C89
widia.com
By referencing this easy-to-use guide, you can
identify the correct product to meet your needs.
Cartridges
Catalogue Numbering System
MCFNR10CA3
10 C A 3
Cartridge Size Identifying Code
of Cartridge
Mounting Design
of Cartridge
Insert
Size
Additional
Information
C= Cartridge A-design conforming
to ISO 5611
Insert iC
Number of
1/8ths of “D”
H1 = Cutting edge height
of cartridge, in inches
WID_Master16_Turning_Holders_C088_C089_Metric_REBRAND.indd 89 10/30/15 3:09 PM
C90 widia.com
Cartridges
Overview
Clamping System M
MMCFN MCKN MCLN MDJN
90° 75° 95° 93°
Page: Page: Page: Page:
C92 C93 C94 C95
Combined pin/wedge clamp
for negative inserts. An
extremely sturdy clamping
system, specially designed
for interrupted cuts. The tool
is protected by a carbide shim.
MDQN MSKN MSRN MSSN
107,5° 75° 75° 45°
Page: Page: Page: Page:
C96 C97 C98 C99
MSTN MSYN MTFN MTGN
60° 85° 90° 90°
Page: Page: Page: Page:
C100 C101 C102 C103
MCFN Product Name
Application Illustration
Page: C62 Page Number
Each unique clamping system offers product options to ll your
speci c toolholder needs. Find the illustration that ts your application
and navigate to the corresponding page to get the correct solution.
P-Style Clamping
PPCLN PSKN
95° 75°
Page: Page:
C104 C105
Lever-type clamping system
for negative indexable inserts
with hole to DIN 4988 and
positive round inserts more
than 20mm in diameter. Inserts
with one- and two-side chip
control geometries have
positive rakes from 6° to 18°.
Advantages of this system are
fast insert changes and no
interference with chip ow.
WID_Master16_Turning_Holders_C090_C091_Metric_REBRAND.indd 90 10/30/15 3:09 PM
C91
widia.com
Cartridges
Overview
Clamping System S
SSCFP SCGP SCLC SCLP
90° 90° 95° 95°
Page: Page: Page: Page:
C110 C111 C112 C113
Combined pin/wedge clamp
for negative inserts. An
extremely sturdy clamping
system, specially designed
for interrupted cuts. The
tool is protected by a
carbide shim.
SCRP SCSP SCTP SCWP
75° 45° 60° 60°
Page: Page: Page: Page:
C114 C115 C116 C117
SDJP SRGC SSKC SSKP
93° 75° 75°
Page: Page: Page: Page:
C118 C119 C120 C121
SSRC SSRP SSSC SSSP
75° 75° 45° 45°
Page: Page: Page: Page:
C122 C123 C124 C125
STFP STGP STTP STWP
90° 90° 60° 60°
Page: Page: Page: Page:
C126 C127 C128 C129
Clamping System C
CCSKP CSRP CSSP CTFP
75° 75° 45° 90°
Page: Page: Page: Page:
C106 C107 C108 C109
Top clamping system
for negative and positive
indexable inserts to DIN
4968. This universal
clamping system is robust
and easy to handle. Some
height-adjustable clamps
enable the use of additional
chipbreakers. A carbide
shim provides additional tool
protection.
WID_Master16_Turning_Holders_C090_C091_Metric_REBRAND.indd 91 10/30/15 3:09 PM
C92
LViWID M 16 T i H ld C092 C093 M i REBRAND O b 15 2015 10 07 AM
widia.com
Tools for External Turning and Internal Boring
M-Style Clamping Cartridges for Negative Inserts
Spare Parts
D min shim
lock
pin hex clamp
clamp
screw hex
radial
adjusting
screw hex
axial
adjusting
screw
mounting
screw hex washer
40 — KLM33 2 mm CKM36 STCM38 2 mm KUAM28 2 mm KUAM30 — 4 mm CSWM 060 050
50 — KLM43 2 mm CKM34 STCM38 2 mm KUAM22 2 mm KUAM31 191.406 4 mm CSWM 060 050
60 ICSN432 KLM46S 2.5 mm CKM34 STCM9 2.5 mm KUAM25 2.5 mm KUAM32 191.407 5 mm CSWM 080 050
70 ICSN432 KLM46 2.5 mm CKM34 STCM9 2.5 mm KUAM25 2.5 mm KUAM32 191.407 5 mm CSWM 080 050
MCFN 90°
order number catalogue number D min F L1 aF° aP°
gage
insert
right hand
3870421 MCFNR10CA09 40 14,0 50 -9.0 -9.0 CN..090308/CN..322
3870420 MCFNR12CA12 50 20,0 55 -9.0 -5.0 CN..120408/CN..432
3870419 MCFNR16CA12 60 25,0 63 -9.0 -5.0 CN..120408/CN..432
3870418 MCFNR20CA12 70 25,0 70 -9.0 -5.0 CN..120408/CN..432
left hand
3870423 MCFNL12CA12 50 20,0 55 -9.0 -5.0 CN..120408/CN..432
3870422 MCFNL16CA12 60 25,0 63 -9.0 -5.0 CN..120408/CN..432
See pages B30–B46
for inserts.
WID_Master16_Turning_Holders_C092_C093_Metric_REBRAND.indd 92 10/30/15 3:10 PM
C93
LViWID M 16 T i H ld C092 C093 M i REBRANDO b 15 201510 07AM
widia.com
Tools for External Turning and Internal Boring
M-Style Clamping Cartridges for Negative Inserts
Spare Parts
D min shim
lock
pin hex clamp
clamp
screw hex
radial
adjusting
screw hex
axial
adjusting
screw
mounting
screw hex washer
50 — KLM43 2 mm CKM34 STCM38 2 mm KUAM22 2 mm KUAM31 191.406 4 mm CSWM 060 050
60 ICSN432 KLM46S 2.5 mm CKM34 STCM9 2.5 mm KUAM25 2.5 mm KUAM32 191.407 5 mm CSWM 080 050
MCKN 75°
order number catalogue number D min F L1 L1A aF° aP°
gage
insert
right hand
3870416 MCKNR12CA12 50 20,0 55 3 -9.0 -5.0 CN..120408/CN..432
3870415 MCKNR16CA12 60 25,0 63 3 -9.0 -5.0 CN..120408/CN..432
left hand
3870417 MCKNL12CA12 50 20,0 55 3 -9.0 -5.0 CN..120408/CN..432
See pages B30–B46
for inserts.
WID_Master16_Turning_Holders_C092_C093_Metric_REBRAND.indd 93 10/30/15 3:10 PM
C94
LViWID M 16 T i H ld C094 C095 M i REBRAND O b 15 2015 10 08 AM
widia.com
Tools for External Turning and Internal Boring
M-Style Clamping Cartridges for Negative Inserts
Spare Parts
D min shim
lock
pin hex clamp
clamp
screw hex
radial
adjusting
screw hex
axial
adjusting
screw
mounting
screw
holding
screw hex washer
50 — KLM43 2 mm CKM34 STCM38 2 mm KUAM22 2 mm KUAM31 191.406 — 4 mm CSWM 060 050
60 ICSN432 KLM46S 2.5 mm CKM34 STCM9 2.5 mm KUAM25 2.5 mm KUAM32 191.407 — 5 mm CSWM 080 050
70 ICSN432 KLM46 2.5 mm CKM34 STCM9 2.5 mm KUAM25 2.5 mm KUAM32 191.407 — 5 mm CSWM 080 050
100 ICSN633 KLM68 4 mm CKM35 STCM8 4 mm KUAM27 4 mm KUAM32 — MS364 8 mm CSWM 100 080
MCLN 95°
order number catalogue number D min F L1 aF° aP°
gage
insert
right hand
3870410 MCLNR12CA12 50 20,0 55 -9.0 -5.0 CN..120408/CN..432
3870409 MCLNR16CA12 60 25,0 63 -9.0 -5.0 CN..120408/CN..432
3870408 MCLNR20CA12 70 25,0 70 -9.0 -5.0 CN..120408/CN..432
3870407 MCLNR25CA19 100 32,0 100 -9.0 -5.0 CN..190612/CN..643
left hand
3870414 MCLNL12CA12 50 20,0 55 -9.0 -5.0 CN..120408/CN..432
3870413 MCLNL16CA12 60 25,0 63 -9.0 -5.0 CN..120408/CN..432
3870412 MCLNL20CA12 70 25,0 70 -9.0 -5.0 CN..120408/CN..432
3870411 MCLNL25CA19 100 32,0 100 -9.0 -5.0 CN..190612/CN..643
See pages B30–B46
for inserts.
WID_Master16_Turning_Holders_C094_C095_Metric_REBRAND.indd 94 10/30/15 3:10 PM
C95
LViWID M 16 T i H ld C094 C095 M i REBRANDO b 15 201510 08AM
widia.com
Tools for External Turning and Internal Boring
M-Style Clamping Cartridges for Negative Inserts
Spare Parts
D min shim
lock
pin hex clamp
clamp
screw hex
radial
adjusting
screw hex
axial
adjusting
screw
mounting
screw hex washer
60 IDSN432 KLM46S 2.5 mm CKM36 STCM9 2.5 mm KUAM25 2.5 mm KUAM32 191.407 5 mm CSWM 080 050
70 IDSN432 KLM46 2.5 mm CKM41 STCM40 2.5 mm KUAM25 2.5 mm KUAM32 191.407 5 mm CSWM 080 050
MDJN 93°
order number catalogue number D min F L1 aF° aP°
gage
insert
right hand
3870405 MDJNR16CA15 60 25,0 63 -9.0 -9.0 DN..150408/DN..3.532
3870404 MDJNR20CA15 70 25,0 70 -8.5 -8.5 DN..150408/DN..3.532
left hand
3870406 MDJNL16CA15 60 25,0 63 -9.0 -9.0 DN..150408/DN..3.532
See pages B47–B64
for inserts.
WID_Master16_Turning_Holders_C094_C095_Metric_REBRAND.indd 95 10/30/15 3:10 PM
C96
LViWID M 16 T i H ld C096 C097 M i REBRAND O b 15 2015 10 09 AM
widia.com
Tools for External Turning and Internal Boring
M-Style Clamping Cartridges for Negative Inserts
Spare Parts
D min shim
lock
pin hex clamp
clamp
screw hex
radial
adjusting
screw hex
axial
adjusting
screw
mounting
screw hex washer
60 IDSN432 KLM46S 2.5 mm CKM36 STCM9 2.5 mm KUAM25 2.5 mm KUAM32 191.407 5 mm CSWM 080 050
70 IDSN432 KLM46 2.5 mm CKM34 STCM9 2.5 mm KUAM25 2.5 mm KUAM32 191.407 5 mm CSWM 080 050
MDQN 107,5°
order number catalogue number D min F L1 aF° aP°
gage
insert
right hand
3870361 MDQNR16CA15 60 25,0 63 -9.0 -6.0 DN..150408/DN..3.532
3870360 MDQNR20CA15 70 25,0 70 -9.0 -8.0 DN..150408/DN..3.532
left hand
3870403 MDQNL16CA15 60 25,0 63 -9.0 -6.0 DN..150408/DN..3.532
3870362 MDQNL20CA15 70 25,0 70 -9.0 -8.0 DN..150408/DN..3.532
See pages B47–B64
for inserts.
WID_Master16_Turning_Holders_C096_C097_Metric_REBRAND.indd 96 10/30/15 3:10 PM
C97
LViWID M 16 T i H ld C096 C097 M i REBRANDO b 15 201510 09AM
widia.com
Tools for External Turning and Internal Boring
M-Style Clamping Cartridges for Negative Inserts
Spare Parts
D min shim
lock
pin hex clamp
clamp
screw hex
radial
adjusting
screw hex
axial
adjusting
screw
mounting
screw
holding
screw hex washer
40 — KLM33 2 mm CKM36 STCM38 2 mm KUAM28 2 mm KUAM30 191.405 — 4 mm CSWM 060 050
50 — KLM43 2 mm CKM34 STCM38 2 mm KUAM22 2 mm KUAM31 191.406 — 4 mm CSWM 060 050
60 ISSN432 KLM46S 2.5 mm CKM34 STCM9 2.5 mm KUAM25 2.5 mm KUAM32 191.407 — 5 mm CSWM 080 050
70 SKSN566K KLM54 2.5 mm CKM37 STCM40 2.5 mm KUAM25 2.5 mm KUAM32 191.407 — 5 mm CSWM 080 050
100 ISSN633 KLM68 4 mm CKM35 STCM8 4 mm KUAM27 4 mm KUAM32 — MS364 8 mm CSWM 100 080
MSKN 75°
order number catalogue number D min F L1 L1A aF° aP°
gage
insert
right hand
3870352 MSKNR10CA09 40,0 14,0 50 2,2 -9.0 -5.0 SN..090308/SN..322
3870351 MSKNR12CA12 50,0 20,0 55 3,0 -9.0 -5.0 SN..120408/SN..432
3870350 MSKNR16CA12 60,0 25,0 63 3,0 -9.0 -5.0 SN..120408/SN..432
3870349 MSKNR20CA15 70,0 25,0 70 3,7 -9.0 -5.0 SN..150612/SN..543
3870348 MSKNR25CA19 100,0 32,0 100 4,6 -9.0 -5.0 SN..190612/SN..543
left hand
3870356 MSKNL10CA09 40,0 14,0 50 2,2 -9.0 -5.0 SN..090308/SN..322
3870354 MSKNL16CA12 60,0 25,0 63 3,0 -9.0 -5.0 SN..120408/SN..432
3870353 MSKNL20CA15 70,0 25,0 70 3,7 -9.0 -5.0 SN..150612/SN..543
See pages B68–B80
for inserts.
WID_Master16_Turning_Holders_C096_C097_Metric_REBRAND.indd 97 10/30/15 3:10 PM
C98
LViWID M 16 T i H ld C098 C099 M i REBRAND O b 15 2015 10 09 AM
widia.com
Tools for External Turning and Internal Boring
M-Style Clamping Cartridges for Negative Inserts
Spare Parts
D min shim
lock
pin hex clamp
clamp
screw hex
radial
adjusting
screw hex
axial
adjusting
screw
mounting
screw hex washer
40 — KLM33 2 mm CKM36 STCM38 2 mm KUAM28 2 mm KUAM30 191.405 4 mm CSWM 060 050
50 — KLM43 2 mm CKM34 STCM38 2 mm KUAM22 2 mm KUAM31 191.406 4 mm CSWM 060 050
60 ISSN432 KLM46S 2.5 mm CKM34 STCM9 2.5 mm KUAM25 2.5 mm KUAM32 191.407 5 mm CSWM 080 050
70 SKSN566K KLM54 2.5 mm CKM37 STCM40 2.5 mm KUAM25 2.5 mm KUAM32 191.407 5 mm CSWM 080 050
MSRN 75°
order number catalogue number D min F L1 aF° aP°
gage
insert
right hand
3870344 MSRNR10CA09 40,0 14,0 50 -9.0 -5.0 SN..090308/SN..322
3870343 MSRNR12CA12 50,0 20,0 55 -9.0 -5.0 SN..120408/SN..432
3870341 MSRNR20CA15 70,0 25,0 70 -9.0 -5.0 SN..150612/SN..543
left hand
3870347 MSRNL12CA12 50,0 20,0 55 -9.0 -5.0 SN..120408/SN..432
3870346 MSRNL16CA12 60,0 25,0 63 -9.0 -5.0 SN..120408/SN..432
3870345 MSRNL20CA15 70,0 25,0 70 -9.0 -5.0 SN..150612/SN..543
See pages B68–B80
for inserts.
WID_Master16_Turning_Holders_C098_C099_Metric_REBRAND.indd 98 10/30/15 3:10 PM
C99
LViWID M 16 T i H ld C098 C099 M i REBRANDO b 15 201510 09AM
widia.com
Tools for External Turning and Internal Boring
M-Style Clamping Cartridges for Negative Inserts
Spare Parts
D min shim
lock
pin hex clamp
clamp
screw hex
radial
adjusting
screw hex
axial
adjusting
screw
mounting
screw hex washer
40 — KLM33 2 mm CKM36 STCM38 2 mm KUAM28 2 mm KUAM30 191.405 4 mm CSWM 060 050
50 — KLM43 2 mm CKM34 STCM38 2 mm KUAM22 2 mm KUAM31 191.406 4 mm CSWM 060 050
60 ISSN432 KLM46S 2.5 mm CKM36 STCM9 2.5 mm KUAM25 2.5 mm KUAM32 191.407 5 mm CSWM 080 050
70 SKSN566K KLM54 2.5 mm CKM37 STCM40 2.5 mm KUAM25 2.5 mm KUAM32 191.407 5 mm CSWM 080 050
MSSN 45°
order number catalogue number D min F L1 L1A hS° aO°
gage
insert
right hand
3870336 MSSNR10CA09 40,0 14,0 44 6,1 -13.0 0.0 SN..090308/SN..322
3870335 MSSNR12CA12 50,0 20,0 47 8,3 -13.0 0.0 SN..120408/SN..432
3870334 MSSNR16CA12 60,0 25,0 53 8,3 -13.0 0.0 SN..120408/SN..432
3870333 MSSNR20CA15 70,0 25,0 60 10,3 -13.0 0.0 SN..150612/SN..543
left hand
3870340 MSSNL10CA09 40,0 14,0 44 6,1 -13.0 0.0 SN..090308/SN..322
3870339 MSSNL12CA12 50,0 20,0 47 8,3 -13.0 0.0 SN..120408/SN..432
3870338 MSSNL16CA12 60,0 25,0 53 8,3 -13.0 0.0 SN..120408/SN..432
See pages B68–B80
for inserts.
WID_Master16_Turning_Holders_C098_C099_Metric_REBRAND.indd 99 10/30/15 3:10 PM
C100
LViWID M 16 T i H ld C100 C101 M i REBRAND O b 15 2015 10 09 AM
widia.com
Tools for External Turning and Internal Boring
M-Style Clamping Cartridges for Negative Inserts
Spare Parts
D min shim
lock
pin hex clamp
clamp
screw hex
radial
adjusting
screw hex
axial
adjusting
screw
mounting
screw hex washer
40 — KLM33 2 mm CKM36 STCM38 2 mm KUAM28 2 mm KUAM30 191.405 4 mm CSWM 060 050
50 — KLM43 2 mm CKM34 STCM38 2 mm KUAM22 2 mm KUAM31 191.406 4 mm CSWM 060 050
60 ISSN432 KLM46S 2.5 mm CKM34 STCM9 2.5 mm KUAM25 2.5 mm KUAM32 191.407 5 mm CSWM 080 050
MSTN 60°
order number catalogue number D min F L1 FA hS° aO°
gage
insert
right hand
3870312 MSTNR10CA09 40,0 9,0 50 13,3 -11.0 0.0 SN..090308/SN..322
3870311 MSTNR12CA12 50,0 13,0 55 5,9 -11.0 0.0 SN..120408/SN..432
3870310 MSTNR16CA12 60,0 15,0 63 5,9 0.0 -11.0 SN..120408/SN..432
See pages B68–B80
for inserts.
WID_Master16_Turning_Holders_C100_C101_Metric_REBRAND.indd 100 10/30/15 3:10 PM
C101
LViWID M 16 T i H ld C100 C101 M i REBRANDO b 15 201510 09AM
widia.com
Tools for External Turning and Internal Boring
M-Style Clamping Cartridges for Negative Inserts
Spare Parts
D min shim
lock
pin hex clamp
clamp
screw hex
radial
adjusting
screw hex
axial
adjusting
screw
mounting
screw
holding
screw hex washer
40 — KLM33 2 mm CKM36 STCM38 2 mm KUAM28 2 mm KUAM30 191.405 — 4 mm CSWM 060 050
50 — KLM43 2 mm CKM34 STCM38 2 mm KUAM22 2 mm KUAM31 191.406 — 4 mm CSWM 060 050
60 ISSN432 KLM46S 2.5 mm CKM34 STCM9 2.5 mm KUAM25 2.5 mm KUAM32 191.407 — 5 mm CSWM 080 050
100 ISSN633 KLM68 4 mm CKM35 STCM8 4 mm KUAM27 4 mm KUAM33 — MS364 8 mm CSWM 100 080
MSYN 85°
order number catalogue number D min F L1 L1A aF° aP°
gage
insert
right hand
3870308 MSYNR10CA09 40,0 14,0 50 0,8 -9.0 -5.0 SN..090308/SN..322
3870307 MSYNR12CA12 50,0 20,0 55 1,0 -9.0 -5.0 SN..120408 / SN..432
3870306 MSYNR16CA12 60,0 25,0 63 1,0 -9.0 -5.0 SN..120408 / SN..432
3870305 MSYNR25CA19 100,0 32,0 100 1,5 -9.0 -5.0 SN..190612/SN..643
left hand
3870309 MSYNL10CA09 40,0 14,0 50 0,8 -9.0 -5.0 SN..090308/SN..322
See pages B68–B80
for inserts.
WID_Master16_Turning_Holders_C100_C101_Metric_REBRAND.indd 101 10/30/15 3:10 PM
C102
LViWID M 16 T i H ld C102 C103 M i REBRAND O b 15 2015 10 09 AM
widia.com
Tools for External Turning and Internal Boring
M-Style Clamping Cartridges for Negative Inserts
Spare Parts
D min shim
lock
pin hex clamp
clamp
screw hex
radial
adjusting
screw hex
axial
adjusting
screw
mounting
screw
holding
screw hex washer
50 — KLM33L 2 mm CKM34 STCM38 2 mm KUAM22 2 mm KUAM31 191.406 — 4 mm CSWM 060 050
60 ITSN322 KLM34L 2 mm CKM34 STCM9 2 mm KUAM25 2 mm KUAM32 191.407 — 5 mm CSWM 080 050
70 ITSN433 KLM46 2.5 mm CKM35 STCM37 2.5 mm KUAM25 2.5 mm KUAM32 191.407 — 5 mm CSWM 080 050
100 ITSN534 KLM58 3 mm CKM38 STCM39 3 mm KUAM26 3 mm KUAM32 — MS364 8 mm CSWM 100 080
MTFN 90°
order number catalogue number D min F L1 aF° aP°
gage
insert
right hand
3871303 MTFNR12CA16 50,0 20,0 55 -9.0 -5.0 TN..160408/TN..332
3871302 MTFNR16CA16 60,0 25,0 63 -9.0 -5.0 TN..160408/TN..332
3871301 MTFNR20CA22 70,0 25,0 70 -9.0 -5.0 TN..220408/TN..432
3871300 MTFNR25CA27 100,0 32,0 100 -9.0 -5.0 TN..270612/TN..443
left hand
3871306 MTFNL12CA16 50,0 20,0 55 -9.0 -5.0 TN..160408/TN..332
3871305 MTFNL16CA16 60,0 25,0 63 -9.0 -5.0 TN..160408/TN..332
See pages B81–B93
for inserts.
WID_Master16_Turning_Holders_C102_C103_Metric_REBRAND.indd 102 10/30/15 3:10 PM
C103
LViWID M 16 T i H ld C102 C103 M i REBRANDO b 15 201510 09AM
widia.com
Tools for External Turning and Internal Boring
M-Style Clamping Cartridges for Negative Inserts
Spare Parts
D min shim lock pin hex clamp
clamp
screw hex
radial
adjusting
screw hex
axial
adjusting
screw
mounting
screw hex washer
50 — KLM33L 2 mm CKM34 STCM38 2 mm KUAM22 2 mm KUAM31 191.406 4 mm CSWM 060 050
60 ITSN322 KLM34L 2 mm CKM34 STCM9 2 mm KUAM25 2 mm KUAM32 191.407 5 mm CSWM 080 050
70 ITSN433 KLM46 2.5 mm CKM35 STCM37 2.5 mm KUAM25 2.5 mm KUAM32 191.407 5 mm CSWM 080 050
MTGN 90°
order number catalogue number D min F L1 aF° aP°
gage
insert
right hand
3871296 MTGNR12CA16 50,0 20,0 55 -9.0 -5.0 TN..160408/TN..332
3871295 MTGNR16CA16 60,0 25,0 63 -9.0 -5.0 TN..160408/TN..332
3871294 MTGNR20CA22 70,0 25,0 70 -9.0 -5.0 TN..220408/TN..432
left hand
3871299 MTGNL12CA16 50,0 20,0 55 -9.0 -5.0 TN..160408/TN..332
3871298 MTGNL16CA16 60,0 25,0 63 -9.0 -5.0 TN..160408/TN..332
3871297 MTGNL20CA22 70,0 25,0 70 -9.0 -5.0 TN..220408/TN..432
See pages B81–B93
for inserts.
WID_Master16_Turning_Holders_C102_C103_Metric_REBRAND.indd 103 10/30/15 3:10 PM
C104
LViWID M 16 T i H ld C104 C105 M i REBRAND O b 15 2015 10 10 AM
widia.com
Tools for External Turning and Internal Boring
P-Style Clamping Cartridges for Negative Inserts
Spare Parts
D min shim
shim
pin
toggle
lever lever screw
wrench size
lever screw
radial
adjusting
screw hex
axial
adjusting
screw
mounting
screw hex washer
50 — — 511.022 514.122 10 IP KUAM28 2 mm KUAM31 191.406 4 mm CSWM 060 050
60 512.112 513.023 511.023 514.123 15 IP KUAM23 2.5 mm KUAM32 191.407 5 mm CSWM 080 050
70 512.117 513.025 511.025 514.125 15 IP KUAM23 2.5 mm KUAM32 191.407 5 mm CSWM 080 050
PCLN 95°
order number catalogue number D min F L1 hS° aO°
gage
insert
right hand
3871291 PCLNR12CA12 50 20,0 55 -6.0 -9.0 CN..120408/CN..432
3871290 PCLNR16CA12 60 25,0 63 -6.0 -7.0 CN..120408/CN..432
left hand
3871293 PCLNL16CA12 60 25,0 63 -6.0 -7.0 CN..120408/CN..432
3871292 PCLNL20CA16 70 25,0 70 — — CN..160612/CN..543
See pages B30–B46
for inserts.
WID_Master16_Turning_Holders_C104_C105_Metric_REBRAND.indd 104 10/30/15 3:10 PM
C105
LViWID M 16 T i H ld C104 C105 M i REBRANDO b 15 201510 10AM
widia.com
Tools for External Turning and Internal Boring
P-Style Clamping Cartridges for Negative Inserts
Spare Parts
D min shim
shim
pin
toggle
lever lever screw
wrench size
lever screw
radial
adjusting
screw hex
axial
adjusting
screw
mounting
screw hex washer
50 — — 511.022 514.122 10 IP KUAM28 2 mm KUAM31 191.406 4 mm CSWM 060 050
60 512.063 513.023 511.023 514.123 15 IP KUAM23 2.5 mm KUAM32 191.407 5 mm CSWM 080 050
70 512.025 513.025 511.025 514.125 15 IP KUAM23 2.5 mm KUAM32 191.407 5 mm CSWM 080 050
PSKN 75°
order number catalogue number D min F L1 L1A hS° aO°
gage
insert
right hand
3871287 PSKNR12CA12 50,0 20,0 55 3,1 -8.0 -6.0 SN..120408/SN..432
3871286 PSKNR16CA12 60,0 25,0 63 3,1 -6.0 -6.0 SN..120408/SN..432
3871289 PSKNR20CA15 70,0 25,0 70 3,8 — — SN..150612/SN..543
left hand
3871288 PSKNL16CA12 60,0 25,0 63 3,1 -6.0 -6.0 SN..120408/SN..432
See pages B68–B80
for inserts.
WID_Master16_Turning_Holders_C104_C105_Metric_REBRAND.indd 105 10/30/15 3:10 PM
C106
LViWID M 16 T i H ld C106 C107 M i REBRAND O b 15 2015 10 10 AM
widia.com
Tools for External Turning and Internal Boring
C-Style Clamping Cartridges for Positive Inserts
Spare Parts
D min clamp
clamp
screw hex
radial
adjusting
screw hex
axial
adjusting
screw
mounting
screw hex washer
40 CKM34 STCM38 2 mm KUAM28 2 mm KUAM30 191.405 4 mm CSWM 060 050
50 CKM34 STCM38 2 mm KUAM22 2 mm KUAM31 191.406 4 mm CSWM 060 050
CSKP 75°
order number catalogue number D min F L1 L1A hS° aO°
gage
insert
right hand
3870437 CSKPR10CA09 40,0 14,0 50 2,2 0.0 5.0 SP..090308/SP..322
3870436 CSKPR12CA12 50,0 20,0 55 3,1 0.0 5.0 SP..120308/SP..422
Chipbreakers for C-Style Cartridges
Chipbreakers
insert chipbreaker
effective
width note
SP..090308/SP..322 CBS-12 2.1
CBS-12D** 2.1 **For chipbreaking on both primary and secondary cutting edges
SP..120308/SP..422 CBS16 4.4
CBS-16D** 2.8 **For chipbreaking on both primary and secondary cutting edges
CBS-16N 3.0
CBS16F 2.1
Effective Width
See pages B186–B191 and
B211–B212 for inserts.
WID_Master16_Turning_Holders_C106_C107_Metric_REBRAND.indd 106 10/30/15 3:10 PM
C107
LViWID M 16 T i H ld C106 C107 M i REBRANDO b 15 201510 10AM
widia.com
Tools for External Turning and Internal Boring
C-Style Clamping Cartridges for Positive Inserts
Spare Parts
D min clamp
clamp
screw hex
radial
adjusting
screw hex
axial
adjusting
screw
mounting
screw hex washer
40 CKM34 STCM38 2 mm KUAM28 2 mm KUAM30 191.405 4 mm CSWM 060 050
50 CKM34 STCM38 2 mm KUAM22 2 mm KUAM31 191.406 4 mm CSWM 060 050
CSRP 75°
order number catalogue number D min F L1 FA hS° aO°
gage
insert
right hand
3870435 CSRPR10CA09 40,0 14,0 50 2,2 0.0 0.0 SP..090308/SP..322
3870434 CSRPR12CA12 50,0 20,0 55 3,0 3.0 0.0 SP..120308/SP..422
Chipbreakers for C-Style Cartridges
Chipbreakers
insert chipbreaker
effective
width note
SP..090308/SP..322 CBS-12 2.1
CBS-12D** 2.1 **For chipbreaking on both primary and secondary cutting edges
SP..120308/SP..422 CBS16 4.4
CBS-16D** 2.8 **For chipbreaking on both primary and secondary cutting edges
CBS-16N 3.0
CBS16F 2.1
Effective Width
See pages B186–B191 and
B211–B212 for inserts.
WID_Master16_Turning_Holders_C106_C107_Metric_REBRAND.indd 107 10/30/15 3:10 PM
C108
LViWID M 16 T i H ld C108 C109 M i REBRAND O b 15 2015 10 10 AM
widia.com
Tools for External Turning and Internal Boring
C-Style Clamping Cartridges for Positive Inserts
Spare Parts
D min shim
shim
screw hex clamp
clamp
screw hex
radial
adjusting
screw hex
axial
adjusting
screw
mounting
screw hex washer
40 ———CKM34 STCM38 2 mm KUAM28 2 mm KUAM30 191.405 4 mm CSWM 060 050
50 ———CKM34 STCM38 2 mm KUAM22 2 mm KUAM31 191.406 4 mm CSWM 060 050
70 SM840 MS111 2 mm CKM20 STCM11 3 mm KUAM26 3 mm KUAM32 191.407 5 mm CSWM 080 050
CSSP 45°
order number catalogue number D min F L1 FA L1A hS° aO°
gage
insert
right hand
3870430 CSSPR10CA09 40,0 14,0 44 6,5 6,1 0.0 0.0 SP..090308/SP..322
3870429 CSSPR12CA12 50,0 20,0 47 8,7 8,3 0.0 0.0 SP..120308/SP..422
left hand
3870433 CSSPL10CA09 40,0 14,0 44 6,5 6,1 0.0 0.0 SP..090308/SP..322
3870432 CSSPL12CA12 50,0 20,0 47 8,7 8,3 0.0 0.0 SP..120308/SP..422
3870431 CSSPL20CA12 70,0 25,0 60 — 8,3 0.0 0.0 SP..120308/SP..422
Chipbreakers for C-Style Cartridges
Chipbreakers
insert chipbreaker
effective
width note
SP..090308/SP..322 CBS-12 2.1
CBS-12D** 2.1 **For chipbreaking on both primary and secondary cutting edges
SP..120308/SP..422 CBS16 4.4
CBS-16D** 2.8 **For chipbreaking on both primary and secondary cutting edges
CBS-16N 3.0
CBS16F 2.1
Effective Width
See pages B186–B191 and
B211–B212 for inserts.
WID_Master16_Turning_Holders_C108_C109_Metric_REBRAND.indd 108 10/30/15 3:10 PM
C109
LViWID M 16 T i H ld C108 C109 M i REBRANDO b 15 201510 10AM
widia.com
Tools for External Turning and Internal Boring
C-Style Clamping Cartridges for Positive Inserts
Spare Parts
D min shim
shim
screw clamp
clamp
screw hex
radial
adjusting
screw hex
axial
adjusting
screw
mounting
screw hex washer
40 — — CKM34 STCM38 2 mm KUAM28 2 mm KUAM30 191.405 4 mm CSWM 060 050
50 — — CKM34 STCM38 2 mm KUAM22 2 mm KUAM31 191.406 4 mm CSWM 060 050
70 SM837 MS125 CKM35 STCM8 4 mm KUAM25 2.5 mm KUAM32 191.407 5 mm CSWM 080 050
CTFP 90°
order number catalogue number D min F L1 aF° aP°
gage
insert
right hand
3870427 CTFPR10CA11 40,0 14,0 50 0.0 5.0 TP..110304/TP..421
3870426 CTFPR12CA16 50,0 20,0 55 0.0 5.0 TP..160308/TP..322
3870424 CTFPR20CA22 70,0 25,0 70 0.0 5.0 TP..220408/TP..432
left hand
3870428 CTFPL12CA16 50,0 20,0 55 0.0 5.0 TP..160308/TP..322
Effective Width
Chipbreakers for C-Style Cartridges
Chipbreakers
insert chipbreaker
effective
width note
TP..110304/TP..421 CBT-8 2.2
TP..160308/TP..322 CBT-12* 4.0 *Use with CTC-style holder only
CBT-12* 2.7 *Use with CTC-style holder only
CBT-12* 2.2 *Use with CTC-style holder only
TP..220408/TP..432 CBT-16 5.5
CBT-16N 3.2
CBT-16F 2.1
See pages B192–B194 and
B212–B216 for inserts.
WID_Master16_Turning_Holders_C108_C109_Metric_REBRAND.indd 109 10/30/15 3:10 PM
C110
LViWID M 16 T i H ld C110 C111 M i REBRAND O b 15 2015 10 10 AM
widia.com
Tools for External Turning and Internal Boring
S-Style Screw Clamp Cartridges for Positive Inserts
Spare Parts
D min
insert
screw Torx
radial
adjusting
screw hex
axial
adjusting
screw
mounting
screw
holding
screw hex washer
20 MS1933 T7 KUAM34 1.5 mm KUAM35 — MS2173 2 mm CSWM 035 040
25 MS1153 T7 KUAM34 1.5 mm KUAM20 — MS2175 2.5 mm CSWM 040 050
40 MS1155 T15 KUAM28 2 mm KUAM30 191.405 — 4 mm CSWM 060 050
SCFP 90°
order number catalogue number D min F L1 aF° aP°
gage
insert
right hand
3871284 SCFPR06CA05 20 8,0 25 0.0 0.0 CP..050204/CP..18151
3871283 SCFPR08CA06 25 10,0 32 0.0 0.0 CP..060204/CP..2151
3871272 SCFPR10CA09 40 14,0 50 0.0 0.0 CP..09T308/CP..3252
left hand
3871285 SCFPL08CA06 25 10,0 32 0.0 0.0 CP..060204/CP..2151
See pages B30–B46
for inserts.
WID_Master16_Turning_Holders_C110_C111_Metric_REBRAND.indd 110 10/30/15 3:10 PM
C111
LViWID M 16 T i H ld C110 C111 M i REBRANDO b 15 201510 10AM
widia.com
Tools for External Turning and Internal Boring
S-Style Screw Clamp Cartridges for Positive Inserts
Spare Parts
D min
insert
screw Torx
radial
adjusting
screw hex
axial
adjusting
screw
holding
screw hex washer
25 MS1153 T7 KUAM34 1.5 mm KUAM20 MS2175 2.5 mm CSWM 040 050
SCGP 90°
order number catalogue number D min F L1 hS° aO°
gage
insert
right hand
3871270 SCGPR08CA06 25 10,0 32 0.0 0.0 CP..060204/CP..2151
left hand
3871271 SCGPL08CA06 25 10,0 32 0.0 0.0 CP..060204/CP..2151
See pages B30–B46
for inserts.
WID_Master16_Turning_Holders_C110_C111_Metric_REBRAND.indd 111 10/30/15 3:10 PM
C112
LViWID M 16 T i H ld C112 C113 M i REBRAND O b 15 2015 10 11 AM
widia.com
Tools for External Turning and Internal Boring
S-Style Screw Clamp Cartridges for Positive Inserts
Spare Parts
D min
insert
screw Torx
radial
adjusting
screw hex
axial
adjusting
screw
mounting
screw hex washer
40 MS1155 T15 KUAM28 2 mm KUAM30 191.405 4 mm CSWM 060 050
50 MS1157 T15 KUAM23 2.5 mm KUAM31 191.406 4 mm CSWM 060 050
60 MS1157 T15 KUAM25 2.5 mm KUAM32 191.407 5 mm CSWM 080 050
SCLC 95°
order number catalogue number D min F L1 aF° aP°
gage
insert
right hand
3871268 SCLCR10CA09 40 14,0 50 -3.0 0.0 CC..09T308/CC..3252
3871265 SCLCR12CA12 50 20,0 55 -3.0 0.0 CC..120408/CC..432
left hand
3871267 SCLCL12CA12 50 20,0 55 -3.0 0.0 CC..120408/CC..432
3871266 SCLCL16CA12 60 25,0 63 -3.0 0.0 CC..120408/CC..432
See pages B30–B46
for inserts.
WID_Master16_Turning_Holders_C112_C113_Metric_REBRAND.indd 112 10/30/15 3:11 PM
C113
LViWID M 16 T i H ld C112 C113 M i REBRANDO b 15 201510 11AM
widia.com
Tools for External Turning and Internal Boring
S-Style Screw Clamp Cartridges for Positive Inserts
Spare Parts
D min
insert
screw Torx
radial
adjusting
screw hex
axial
adjusting
screw
mounting
screw
holding
screw hex washer
20 MS1933 T7 KUAM34 1.5 mm KUAM35 — MS2173 2 mm CSWM 035 040
25 MS1153 T7 KUAM34 1.5 mm KUAM20 — MS2175 2.5 mm CSWM 040 050
40 MS1155 T15 KUAM28 2 mm KUAM30 191.405 — 4 mm CSWM 060 050
SCLP 95°
order number catalogue number D min F L1 aF° aP°
gage
insert
right hand
3871261 SCLPR06CA05 20 8,0 25 0.0 0.0 CP..050204/CP..18151
3871260 SCLPR08CA06 25 10,0 32 0.0 0.0 CP..060204/CP..2151
3871259 SCLPR10CA09 40 14,0 50 0.0 0.0 CP..09T308/CP..3252
left hand
3871264 SCLPL06CA05 20 8,0 25 0.0 0.0 CP..050204/CP..18151
3871263 SCLPL08CA06 25 10,0 32 0.0 0.0 CP..060204/CP..2151
3871262 SCLPL10CA09 40 14,0 50 0.0 0.0 CP..09T308/CP..3252
See pages B30–B46
for inserts.
WID_Master16_Turning_Holders_C112_C113_Metric_REBRAND.indd 113 10/30/15 3:11 PM
C114
LViWID M 16 T i H ld C114 C115 M i REBRAND O b 15 2015 10 11 AM
widia.com
Tools for External Turning and Internal Boring
S-Style Screw Clamp Cartridges for Positive Inserts
Spare Parts
D min
insert
screw Torx
radial
adjusting
screw hex
axial
adjusting
screw
holding
screw hex washer
25 MS1153 T7 KUAM34 1.5 mm KUAM20 MS2175 2.5 mm CSWM 040 050
SCRP 75°
order number catalogue number D min F FA L1 aF° aP°
gage
insert
right hand
3871257 SCRPR08CA06 25 10,0 1,5 32 0.0 0.0 CP..060204/CP..2151
left hand
3871258 SCRPL08CA06 25 10,0 1,5 32 0.0 0.0 CP..060204/CP..2151
See pages B30–B46
for inserts.
WID_Master16_Turning_Holders_C114_C115_Metric_REBRAND.indd 114 10/30/15 3:11 PM
C115
LViWID M 16 T i H ld C114 C115 M i REBRANDO b 15 201510 11AM
widia.com
Tools for External Turning and Internal Boring
S-Style Screw Clamp Cartridges for Positive Inserts
Spare Parts
D min
insert
screw Torx
radial
adjusting
screw hex
axial
adjusting
screw
holding
screw hex washer
20 MS1933 T7 ——KUAM35 MS2173 2 mm CSWM 035 040
25 MS1153 T7 KUAM34 1.5 mm KUAM20 MS2175 2.5 mm CSWM 040 050
SCSP 45°
order number catalogue number D min F L1 L1A aF° aP°
gage
insert
right hand
3871255 SCSPR06CA05 20 8,0 21 4 0.0 0.0 CP..050204/CP..18151
3871254 SCSPR08CA06 25 10,0 28 4 0.0 0.0 CP..060204/CP..2151
See pages B30–B46
for inserts.
WID_Master16_Turning_Holders_C114_C115_Metric_REBRAND.indd 115 10/30/15 3:11 PM
C116
LViWID M 16 T i H ld C116 C117 M i REBRAND O b 15 2015 10 11 AM
widia.com
Tools for External Turning and Internal Boring
S-Style Screw Clamp Cartridges for Positive Inserts
Spare Parts
D min
insert
screw Torx
radial
adjusting
screw hex
axial
adjusting
screw
holding
screw hex washer
20 MS1933 T7 ——KUAM35 MS2173 2 mm CSWM 035 040
25 MS1153 T7 KUAM34 1.5 mm KUAM20 MS2175 2.5 mm CSWM 040 050
SCTP 60°
order number catalogue number D min F FA L1 aF° aP°
gage
insert
right hand
3871252 SCTPR06CA05 20 5,5 2,6 25 0.0 0.0 CP..050204/CP..18151
3871251 SCTPR08CA06 25 6,0 3,0 32 0.0 0.0 CP..060204/CP..2151
left hand
3871253 SCTPL08CA06 25 6,0 3,0 32 0.0 0.0 CP..060204/CP..2151
See pages B30–B46
for inserts.
WID_Master16_Turning_Holders_C116_C117_Metric_REBRAND.indd 116 10/30/15 3:11 PM
C117
LViWID M 16 T i H ld C116 C117 M i REBRANDO b 15 201510 11AM
widia.com
Tools for External Turning and Internal Boring
S-Style Screw Clamp Cartridges for Positive Inserts
Spare Parts
D min
insert
screw Torx
radial
adjusting
screw hex
axial
adjusting
screw
holding
screw hex washer
25 MS1153 T7 KUAM34 1.5 mm KUAM20 MS2175 2.5 mm CSWM 040 050
SCWP 60°
order number catalogue number D min F L1 aF° aP°
gage
insert
right hand
3871249 SCWPR08CA06 25 10,0 32 0.0 0.0 CP..060204/CP..2151
left hand
3871250 SCWPL08CA06 25 10,0 32 0.0 0.0 CP..060204/CP..2151
See pages B30–B46
for inserts.
WID_Master16_Turning_Holders_C116_C117_Metric_REBRAND.indd 117 10/30/15 3:11 PM
C118
LViWID M 16 T i H ld C118 C119 M i REBRAND O b 15 2015 10 11 AM
widia.com
Tools for External Turning and Internal Boring
S-Style Screw Clamp Cartridges for Positive Inserts
Spare Parts
D min
insert
screw Torx
radial
adjusting
screw hex
axial
adjusting
screw
mounting
screw hex washer
40 MS1153 T7 KUAM28 2 mm KUAM30 191.405 4 mm CSWM 060 050
SDJP 93°
order number catalogue number D min F L1 aF° aP°
gage
insert
right hand
3871247 SDJPR10CA07 40 14,0 50 0.0 0.0 DP..070204/DP..2151
left hand
3871248 SDJPL10CA07 40 14,0 50 0.0 0.0 DP..070204/DP..2151
See pages B47–B64
for inserts.
WID_Master16_Turning_Holders_C118_C119_Metric_REBRAND.indd 118 10/30/15 3:11 PM
C119
LViWID M 16 T i H ld C118 C119 M i REBRANDO b 15 201510 11AM
widia.com
Tools for External Turning and Internal Boring
S-Style Screw Clamp Cartridges for Positive Inserts
Spare Parts
D min
insert
screw Torx
radial
adjusting
screw hex
axial
adjusting
screw
mounting
screw
holding
screw hex washer
25 MS1153 T7 KUAM34 1.5 mm KUAM20 — MS2175 2.5 mm CSWM 040 050
40 MS1154 T9 KUAM28 2 mm KUAM30 191.405 — 4 mm CSWM 060 050
50 MS1155 T15 KUAM23 2.5 mm KUAM31 191.406 — 4 mm CSWM 060 050
SRGC
order number catalogue number D min F L1 aF° aP°
gage
insert
right hand
3871245 SRGCR08CA06 25 10,0 32 -4.0 0.0 RC..0602M0/RC..215
3871244 SRGCR10CA08 40 14,0 50 -3.0 0.0 RC..0803M0/RC..0803M0
left hand
3871246 SRGCL12CA10 50 20,0 55 -3.0 0.0 RC..10T3M0/RC..10T3M0
See pages B65–B67
for inserts.
WID_Master16_Turning_Holders_C118_C119_Metric_REBRAND.indd 119 10/30/15 3:11 PM
C120
LViWID M 16 T i H ld C120 C121 M i REBRAND O b 15 2015 10 11 AM
widia.com
Tools for External Turning and Internal Boring
S-Style Screw Clamp Cartridges for Positive Inserts
Spare Parts
D min
insert
screw Torx
radial
adjusting
screw hex
axial
adjusting
screw
mounting
screw hex washer
40 MS1155 T15 KUAM28 2 mm KUAM30 191.405 4 mm CSWM 060 050
50 MS1157 T15 KUAM23 2.5 mm KUAM31 191.406 4 mm CSWM 060 050
60 MS1157 T15 KUAM25 2.5 mm KUAM32 191.407 5 mm CSWM 080 050
SSKC 75°
order number catalogue number D min F L1 aF° aP°
gage
insert
right hand
3871192 SSKCR10CA09 40 14,0 50 -4.3 -2.5 SC..09T308/SC..3252
3871191 SSKCR12CA12 50 20,0 55 -3.0 0.0 SC..120408/SC..432
3871190 SSKCR16CA12 60 25,0 63 -3.0 0.0 SC..120408/SC..432
left hand
3871243 SSKCL12CA12 50 20,0 55 -3.0 0.0 SC..120408/SC..432
See pages B68–B80
for inserts.
WID_Master16_Turning_Holders_C120_C121_Metric_REBRAND.indd 120 10/30/15 3:11 PM
C121
LViWID M 16 T i H ld C120 C121 M i REBRANDO b 15 201510 11AM
widia.com
Tools for External Turning and Internal Boring
S-Style Screw Clamp Cartridges for Positive Inserts
Spare Parts
D min
insert
screw Torx
radial
adjusting
screw hex
axial
adjusting
screw
mounting
screw hex washer
40 MS1155 T15 KUAM28 2 mm KUAM30 191.405 4 mm CSWM 060 050
50 MS1155 T15 KUAM23 2.5 mm KUAM31 191.406 4 mm CSWM 060 050
SSKP 75°
order number catalogue number D min F L1 aF° aP°
gage
insert
right hand
3870393 SSKPR10CA09 40 14,0 50 0.0 0.0 SP..09T308/SP..3252
3870392 SSKPR12CA09 50 20,0 55 0.0 0.0 SP..09T308/SP..3252
left hand
3870394 SSKPL10CA09 40 14,0 50 0.0 0.0 SP..09T308/SP..3252
See pages B68–B80
for inserts.
WID_Master16_Turning_Holders_C120_C121_Metric_REBRAND.indd 121 10/30/15 3:11 PM
C122
LViWID M 16 T i H ld C122 C123 M i REBRAND O b 15 2015 10 12 AM
widia.com
Tools for External Turning and Internal Boring
S-Style Screw Clamp Cartridges for Positive Inserts
Spare Parts
SSRC 75°
order number catalogue number D min F FA L1 hS° aO°
gage
insert
right hand
3870390 SSRCR12CA12 50 20,0 3,1 55 -3.0 0.0 SC..120408/SC..432
left hand
3870391 SSRCL12CA12 50 20,0 3,1 55 -3.0 0.0 SC..120408/SC..432
See pages B68–B80
for inserts.
D min
insert
screw Torx
radial
adjusting
screw hex
axial
adjusting
screw
mounting
screw hex washer
50 MS1157 T15 KUAM23 2.5 mm KUAM31 191.406 4 mm CSWM 060 050
WID_Master16_Turning_Holders_C122_C123_Metric_REBRAND.indd 122 10/30/15 3:11 PM
C123
LViWID M 16 T i H ld C122 C123 M i REBRANDO b 15 201510 12AM
widia.com
Tools for External Turning and Internal Boring
S-Style Screw Clamp Cartridges for Positive Inserts
Spare Parts
SSRP 75°
order number catalogue number D min F FA L1 aF° aP°
gage
insert
right hand
3870388 SSRPR10CA09 40 14,0 2,2 50 0.0 0.0 SP..09T308/SP..3252
left hand
3870389 SSRPL10CA09 40 14,0 2,2 50 0.0 0.0 SP..09T308/SP..3252
See pages B68–B80
for inserts.
D min
insert
screw Torx
radial
adjusting
screw hex
axial
adjusting
screw
mounting
screw hex washer
40 MS1155 T15 KUAM28 2 mm KUAM30 191.405 4 mm CSWM 060 050
WID_Master16_Turning_Holders_C122_C123_Metric_REBRAND.indd 123 10/30/15 3:11 PM
C124
LViWID M 16 T i H ld C124 C125 M i REBRAND O b 15 2015 10 12 AM
widia.com
Tools for External Turning and Internal Boring
S-Style Screw Clamp Cartridges for Positive Inserts
Spare Parts
D min
insert
screw Torx
radial
adjusting
screw hex
axial
adjusting
screw
mounting
screw hex washer
40 MS1155 T15 KUAM28 2 mm KUAM30 191.405 4 mm CSWM 060 050
50 MS1157 T15 KUAM23 2.5 mm KUAM31 191.406 4 mm CSWM 060 050
60 MS1157 T15 KUAM25 2.5 mm KUAM32 191.407 5 mm CSWM 080 050
SSSC 45°
order number catalogue number D min F L1 aF° aP°
gage
insert
right hand
3870386 SSSCR10CA09 40 14,0 44 -3.0 0.0 SC..09T308/SC..3252
3870385 SSSCR12CA12 50 20,0 47 -3.0 0.0 SC..120408/SC..432
3870384 SSSCR16CA12 60 25,0 53 0.0 0.0 SC..120408/SC..432
left hand
3870387 SSSCL12CA12 50 20,0 47 -3.0 0.0 SC..120408/SC..432
See pages B68–B80
for inserts.
WID_Master16_Turning_Holders_C124_C125_Metric_REBRAND.indd 124 10/30/15 3:11 PM
C125
LViWID M 16 T i H ld C124 C125 M i REBRANDO b 15 201510 12AM
widia.com
Tools for External Turning and Internal Boring
S-Style Screw Clamp Cartridges for Positive Inserts
Spare Parts
D min
insert
screw Torx
radial
adjusting
screw hex
axial
adjusting
screw
mounting
screw hex washer
40 MS1155 T15 KUAM28 2 mm KUAM30 191.405 4 mm CSWM 060 050
SSSP 45°
order number catalogue number D min F L1 aF° aP°
gage
insert
right hand
3870382 SSSPR10CA09 40 14,0 44 0.0 0.0 SP..09T308/SP..3252
left hand
3870383 SSSPL10CA09 40 14,0 44 0.0 0.0 SP..09T308/SP..3252
See pages B68–B80
for inserts.
WID_Master16_Turning_Holders_C124_C125_Metric_REBRAND.indd 125 10/30/15 3:11 PM
C126
LViWID M 16 T i H ld C126 C127 M i REBRAND O b 15 2015 10 12 AM
widia.com
Tools for External Turning and Internal Boring
S-Style Screw Clamp Cartridges for Positive Inserts
Spare Parts
D min
insert
screw Torx
radial
adjusting
screw hex
axial
adjusting
screw
mounting
screw
holding
screw hex washer
25 MS1152 T7 KUAM34 1.5 mm KUAM20 — MS2175 2.5 mm CSWM 040 050
40 MS1153 T7 KUAM28 2 mm KUAM30 191.405 — 4 mm CSWM 060 050
50 MS1155 T15 KUAM23 2.5 mm KUAM31 191.406 — 4 mm CSWM 060 050
STFP 90°
order number catalogue number D min F L1 aF° aP°
gage
insert
right hand
3870378 STFPR08CA09 25 10,0 32 0.0 0.0 TP..090204/TP..18151
3870377 STFPR10CA11 40 14,0 50 0.0 0.0 TP..110204/TP..2151
3870376 STFPR12CA16 50 20,0 55 0.0 0.0 TP..16T308/TP..3252
left hand
3870381 STFPL08CA09 25 10,0 32 0.0 0.0 TP..090204/TP..18151
3870380 STFPL10CA11 40 14,0 50 0.0 0.0 TP..110204/TP..2151
3870379 STFPL12CA16 50 20,0 55 0.0 0.0 TP..16T308/TP..3252
See pages B81–B93
for inserts.
WID_Master16_Turning_Holders_C126_C127_Metric_REBRAND.indd 126 10/30/15 3:11 PM
C127
LViWID M 16 T i H ld C126 C127 M i REBRANDO b 15 201510 12AM
widia.com
Tools for External Turning and Internal Boring
S-Style Screw Clamp Cartridges for Positive Inserts
Spare Parts
D min
insert
screw Torx
radial
adjusting
screw hex
axial
adjusting
screw
mounting
screw
holding
screw hex washer
25 MS1152 T7 KUAM34 1.5 mm KUAM20 — MS2175 2.5 mm CSWM 040 050
40 MS1153 T7 KUAM28 2 mm KUAM30 191.405 — 4 mm CSWM 060 050
50 MS1155 T15 KUAM23 2.5 mm KUAM31 191.406 — 4 mm CSWM 060 050
STGP 90°
order number catalogue number D min F L1 aF° aP°
gage
insert
right hand
3870372 STGPR08CA09 25 10,0 32 0.0 0.0 TP..090204/TP..18151
3870371 STGPR10CA11 40 14,0 50 0.0 0.0 TP..110204/TP..2151
3870370 STGPR12CA16 50 20,0 55 0.0 0.0 TP..16T308/TP..3252
left hand
3870374 STGPL08CA09 25 10,0 32 0.0 0.0 TP..090204/TP..18151
3870373 STGPL10CA11 40 14,0 50 0.0 0.0 TP..110204/TP..2151
See pages B81–B93
for inserts.
WID_Master16_Turning_Holders_C126_C127_Metric_REBRAND.indd 127 10/30/15 3:11 PM
C128
LViWID M 16 T i H ld C128 C129 M i REBRAND O b 15 2015 10 12 AM
widia.com
Tools for External Turning and Internal Boring
S-Style Screw Clamp Cartridges for Positive Inserts
Spare Parts
D min
insert
screw Torx
radial
adjusting
screw hex
axial
adjusting
screw
mounting
screw
holding
screw hex washer
25 MS1152 T7 KUAM34 1.5 mm KUAM20 — MS2175 2.5 mm CSWM 040 050
40 MS1153 T7 KUAM28 2 mm KUAM30 191.405 — 4 mm CSWM 060 050
50 MS1155 T15 KUAM23 2.5 mm KUAM31 191.406 — 4 mm CSWM 060 050
STTP 60°
order number catalogue number D min F FA L1 aF° aP°
gage
insert
right hand
3870369 STTPR08CA09 25 6,0 4,3 32 0.0 0.0 TP..090204/TP..18151
3870368 STTPR10CA11 40 9,0 4,9 50 0.0 0.0 TP..110204/TP..2151
3870367 STTPR12CA16 50 13,0 7,2 55 0.0 0.0 TP..16T308/TP..3252
See pages B81–B93
for inserts.
WID_Master16_Turning_Holders_C128_C129_Metric_REBRAND.indd 128 10/30/15 3:11 PM
C129
LViWID M 16 T i H ld C128 C129 M i REBRANDO b 15 201510 12AM
widia.com
Tools for External Turning and Internal Boring
S-Style Screw Clamp Cartridges for Positive Inserts
Spare Parts
D min
insert
screw Torx
radial
adjusting
screw hex
axial
adjusting
screw
mounting
screw
holding
screw hex washer
25 MS1152 T7 KUAM34 1.5 mm KUAM20 — MS2175 2.5 mm CSWM 040 050
40 MS1153 T7 KUAM28 2 mm KUAM30 191.405 — 4 mm CSWM 060 050
50 MS1155 T15 KUAM23 2.5 mm KUAM31 191.406 — 4 mm CSWM 060 050
STWP 60°
order number catalogue number D min F L1 L1A aF° aP°
gage
insert
right hand
3870364 STWPR08CA09 25 10,0 28 4,3 0.0 0.0 TP..090204/TP..18151
3870363 STWPR10CA11 40 14,0 44 5,0 0.0 0.0 TP..110204/TP..2151
3870252 STWPR12CA16 50 20,0 47 7,2 0.0 0.0 TP..16T308/TP..3252
left hand
3870366 STWPL10CA11 40 14,0 44 5,0 0.0 0.0 TP..110204/TP..2151
3870365 STWPL12CA16 50 20,0 47 7,2 0.0 0.0 TP..16T308/TP..3252
See pages B99–B105
for inserts.
WID_Master16_Turning_Holders_C128_C129_Metric_REBRAND.indd 129 10/30/15 3:11 PM
WID_Master16_Turning_Circle_D000_D001_Metric_REBRAND.indd 1 12/14/15 2:41 PM
widia.com D1
Turning • Tools for Small Hole Boring
Small Hole Boring I.D. Indexable Insert Tooling ............................................................................................. D2–D59
A/B Series ........................................................................................................................................................ D60–D71
Quadralock ....................................................................................................................................................... D72–D84
Technical Information ..................................................................................................................................... D86–D89
Custom Solution Worksheet .......................................................................................................................... D90–D91
WID_Master16_Turning_Circle_D000_D001_Metric_REBRAND.indd 2 12/14/15 2:41 PM
D2 widia.com
Threading and Grooving
Boring Bars
• Easy insert changes for threading and grooving.
• Thread down to a 48 TPI, 1,3mm TP (pitch).
• Thread and groove capabilities to an inside
bore diameter of 6,91mm.
80° Diamond Insert Boring Bars
• Available in shanks as small as 4mm
to bore >4,57mm diameter.
• Positive rake geometry for free cutting action
and better surface fi nishes.
• Superior, unobstructed chip evacuation.
• Stocked in multiple grades to bore a wide
range of materials.
Small Hole Boring •
I.D. Indexable Insert Tooling
The WIDIA™ line of micro boring bars provide accurate holemaking
tooling in diameters as small as 1,57mm. These economical, indexable
inserts are available in both steel and carbide shanks and are stocked
in both metric and inch sizes. Ideal for a wide range of applications,
including precision micro boring.
WID_Master16_Turning_Circle_D002_D003_Metric_REBRAND.indd 2 11/11/15 5:32 PM
D3
widia.com
Triangle Insert Boring Bars
• Designed for less obstruction and greater chip evacuation.
• Positive rake geometry to bore holes >6,98mm diameter.
• Stocked in all grades, including diamond-tipped and borazon-
tipped styles.
• Stocked in shanks as small as 6mm for 7,06mm
minimum bore diameter.
Multi-application tooling — groove
and thread with the same bar. Inserts available in multiple
styles and grades, including
polycrystalline diamond tipped,
for all machining applications.
0,05mm insert nose radii available;
insert repeatability within 0,005mm.
Choose from high-quality steel
or carbide shanks with through
tool coolant capabilities.
WID_Master16_Turning_Circle_D002_D003_Metric_REBRAND.indd 3 11/11/15 5:32 PM
D4 widia.com
Boring
minimum bore diameter
(D min) high performance general performance
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
NOTE: Proper bar selection will have largest minimum bore dimension under hole size to be bored.
Tool Selection Guide
Choosing the Correct Small Hole Boring Bar
The World’s Most Comprehensive Boring Solutions
Select the Correct Small Hole Boring Product Platform for Your Application
Trust the WIDIA
™
full line of boring tools to meet all of your demanding job
requirements. Whatever the work at hand, you are sure to nd the most
appropriate solution in this comprehensive, easy-to-use guide.
We engineer only the BEST boring tools, guaranteed to reduce your
machining time, provide superior results, and outperform the competition.
1 Determine tooling system to be used based on hole size to be bored (D min).
Indexable Tooling A/B Series Quadralock
™
Indexable Tooling
A/B Series
Quadralock
Indexable Tooling
Quadralock
™
A Series
B Series
WID_Master16_Turning_Circle_D004_D005_Metric_REBRAND.indd 4 10/30/15 3:16 PM
D5
widia.com
Grooving
minimum bore diameter
(D min) high performance general performance
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Threading
minimum bore diameter
(D min) high performance general performance
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
Profi ling
minimum bore diameter
(D min) high performance general performance
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
Tool Selection Guide
Choosing the Correct Small Hole Boring Bar
NOTE: Proper bar selection will have largest minimum bore dimension under hole size to be bored.
Quadralock
™
A Series
B Series
Indexable Tooling
Indexable Tooling
Quadralock
™
A Series
A Series Quadralock
™
Indexable Tooling
WID_Master16_Turning_Circle_D004_D005_Metric_REBRAND.indd 5 10/30/15 3:16 PM
D6 widia.com
Tool Selection Guide
Choosing the Correct Small Hole Boring Bar
2 Determine boring bar (D).
A Select shank size (D) based on your
machine’s requirements.
B Determine bore depth (how far the
boring bar extends from the holder).
Multiply bar diameter by 4. If bore depth
is less, use a steel bar. If bore depth
exceeds 4:1 ratio, use a carbide bar.
Use L1 or L4 depending on bar selected.
(See recommended maximum overhang
chart on page D86.) For indexable tooling,
go to step 3. For all other
tooling systems, go directly to step 4.
C Determine lead angle (KRA). Zero
degree lead angle is used when maximum
stability is required. Lead angle may vary
based on changing conditions, such as
boring in a blind hole.
ABC
3 Determine which chipbreaker is best
for the material to be machined.
Consult the Small Hole Boring Chipbreaker
Geometry charts on pages D34–D37.
4 Determine which grade is best for the
material to be machined.
Consult the Grades and Grade Descriptions
charts on pages D38–D39.
WID_Master16_Turning_Circle_D006_D007_Metric_REBRAND.indd 6 11/11/15 5:32 PM
D7
widia.com
Tool Selection Guide
Choosing the Correct Small Hole Boring Bar
B
5 Select the appropriate insert based
on style, grade, and geometry.
6 Determine the Speed and Feed Chart
with the appropriate cutting data.
A Based on grade and edge geometry,
identify starting speed (vc) and feed (fz).
The rst choice starting feed is in bold.
B Use the corresponding speed located
in the same column below the feed
information.
AB
WID_Master16_Turning_Circle_D006_D007_Metric_REBRAND.indd 7 11/11/15 5:32 PM
D8 widia.com
How Do Catalogue Numbers Work?
Each character in our catalogue number signi es a speci c trait of that
product. Use the following key columns and corresponding images
to easily identify which attributes apply.
CSBM5210125R
Small Hole Boring Bars
Catalogue Numbering System
CS B M
Series Type Bar Type Bar Style Designation Units Insert Shape
(optional)
C
M = Metric
C
F
W
S = Steel
(with coolant)
G
C = Carbide
(with coolant)
L
B
Boring Bar
O
Offset Boring Bar
Q
C
External
Chamfering Bar
P
Pro ling Bar
I
Internal
Threading Bar
R
Reverse Chamfer
or Back Chamfer Bar
S
M
Offset Internal
Grooving Bar
WID_Master16_Turning_Circle_D008_D009_Metric_REBRAND.indd 8 10/30/15 3:16 PM
D9
widia.com
Small Hole Boring Bars
Catalogue Numbering System
By referencing this easy-to-use guide, you can
identify the correct product to meet your needs.
NOTE: Only shown on stepped-style bars.
*NOTE: Shown as “KRI” for metric bars.
CSBM5210125R
52 10 12 5 R
Head Diameter
shown as “D2”
Shank Diameter
shown as “D”
Length/Depth shown
as “L1/L4”
Lead Angle* Hand of Tool
Metric Metric Bore Length for Step Bars
Thread Depth for Threading Bars
Overall Length for Straight
Shank Bars
0= 90°
Used for
Threading/
Grooving Bars
R
= Right hand
7= 6,60mm 4= 4,00mm
L
= Left hand
8= 8,18mm/8,20mm 5= 5,00mm
10 = 9,78mm 6= 6,00mm Right-hand boring bar
13 = 12,70mm/
12,95mm
8= 8,00mm 3=3°
R
45 = 4,57mm 10 = 10,00mm Metric 5=5°
Left-hand boring bar
48 = 4,80mm 12 = 12,00mm 12 = 12,70mm 7=7°
52 = 5,16mm 16 = 16,00mm 19 = 19,05mm 225 = 22.5˚
53 = 5,30mm 22 = 22,23mm 30 = 30°
64 = 6,60mm 25 = 25,40mm 45 = 45°
66 = 6,55mm/6,60mm 32 = 31,75mm 60 = 60°
82 = 8,15mm 38 = 38,10mm
95 = 9,50mm 48 = 47,63mm
99 = 9,91mm 51 = 50,80mm
159 = 15,88mm 63 = 63,50mm
L
64 = 64,00mm
76 = 76,00mm
79 = 79,38mm
100 = 100,58mm/
101,50mm/
101,60mm
102 = 101,60mm
127 = 127,00mm
152 = 152,00mm
152,40mm
178 = 177,80mm
179,90mm
203 = 203,20mm
254 = 254,00mm
Head
Diameter
Shank
Diameter
WID_Master16_Turning_Circle_D008_D009_Metric_REBRAND.indd 9 10/30/15 3:16 PM
D10
LViWID M 16 T i Ci l D010 D011 M i REBRAND O b 15 2015 10 15 AM
widia.com
Small Hole Boring Bars for Turning
Clamping System S • Steel
CSBM
order number catalogue number KRI D D min D2 F L1 A aF° aP°
gage
insert
insert
screw Torx
right hand
3896205 CSBM5650R 90 5,00 5,94 5,16 3,10 63,50 1,02 0.0° 5.0° CD..S4T002 CC09 T6
2831676 CSBM6650R 90 6,00 7,09 6,20 3,73 63,50 1,02 0.0° 5.0° CD..S4T002 CC11 T6
2831441 CSBM5655R 95 5,00 5,79 5,16 2,95 63,50 1,02 0.0° 5.0° CD..S4T002 CC09 T6
2831687 CSBM6655R 95 6,00 7,09 6,21 3,73 63,50 1,02 0.0° 5.0° CD..S4T002 CC11 T6
2831666 CSBM8765R 95 8,00 9,04 8,18 4,70 76,20 1,52 0.0° 5.0° CD..S4T002 CC11 T6
2831701 CSBM4657R 97 4,00 4,57 4,22 2,41 63,50 1,02 0.0° 0.0° CD..S4T002 CC09 T6
left hand
3896204 CSBM5650L 90 5,00 5,94 5,16 3,10 63,50 1,02 0.0° 5.0° CD..S4T002 CC09 T6
3896207 CSBM6650L 90 6,00 7,09 6,20 3,73 63,50 1,02 0.0° 5.0° CD..S4T002 CC11 T6
3896209 CSBM8760L 90 8,00 9,05 8,18 4,70 76,00 2,40 0.0° 5.0° CD..S4T002 CC11 T6
3896206 CSBM5655L 95 5,00 5,78 5,16 2,95 63,50 1,02 0.0° 5.0° CD..S4T002 CC09 T6
3896208 CSBM6655L 95 6,00 7,09 6,20 3,73 63,50 1,02 0.0° 5.0° CD..S4T002 CC11 T6
3517652 CSBM8765L 95 8,00 9,04 8,18 9,04 76,20 1,52 0.0° 5.0° CD..S4T002 CC11 T6
2831695 CSBM4657L 97 4,00 4,57 4,22 2,41 63,50 1,02 0.0° 0.0° CD..S4T002 CC09 T6
Tools for Small Hole Boring
WID_Master16_Turning_Circle_D010_D011_Metric_REBRAND.indd 10 10/30/15 3:17 PM
D11
LViWID M 16 T i Ci l D010 D011 M i REBRANDO b 15 201510 15AM
widia.com
Small Hole Boring Bars for Turning
Clamping System S • Steel Stepped
CSBM • STEPPED
order number catalogue number KRI D D min D2 F L1 L4 A aF° aP°
gage
insert
insert
screw Torx
right hand
2831606 CSBM5210250R 90 10,00 5,94 5,16 3,10 70,00 25,72 1,02 0.0° 5.0° CD..S4T002 CC11 T6
2831499 CSBM5212250R 90 12,00 5,94 5,16 3,10 70,00 25,40 1,02 0.0° 5.0° CD..S4T002 CC11 T6
2831477 CSBM6412190R 90 12,00 7,42 6,60 3,86 70,00 19,05 1,02 0.0° 5.0° CD..S4T002 CC11 T6
2831462 CSBM6412320R 90 12,00 7,42 6,60 3,86 70,00 31,75 1,02 0.0° 5.0° CD..S4T002 CC11 T6
2831661 CSBM4510125R 95 10,00 5,18 4,57 5,18 69,85 12,70 1,02 0.0° 5.0° CD..S4T002 CC09 T6
2831639 CSBM5210125R 95 10,00 5,78 5,16 2,95 70,00 12,30 1,02 0.0° 5.0° CD..S4T002 CC09 T6
2831615 CSBM5210255R 95 10,00 5,78 5,16 5,78 69,85 24,96 1,02 0.0° 5.0° CD..S4T002 CC11 T6
2831595 CSBM6410195R 95 10,00 7,24 6,60 3,68 70,00 19,05 1,02 0.0° 5.0° CD..S4T002 CC11 T6
2831548 CSBM4512125R 95 12,00 5,18 4,57 2,64 69,85 12,70 1,02 0.0° 5.0° CD..S4T002 CC09 T6
2831512 CSBM5212255R 95 12,00 5,78 5,16 2,95 70,00 25,40 1,02 0.0° 5.0° CD..S4T002 CC09 T6
2831490 CSBM6412195R 95 12,00 7,24 6,60 3,68 70,00 19,05 1,02 0.0° 5.0° CD..S4T002 CC11 T6
2831468 CSBM6412325R 95 12,00 7,24 6,60 3,68 70,00 31,75 1,02 0.0° 5.0° CD..S4T002 CC11 T6
left hand
2831656 CSBM4510125L 95 10,00 5,18 4,57 2,64 70,00 12,70 1,02 0.0° 5.0° CD..S4T002 CC09 T6
2831588 CSBM6410195L 95 10,00 7,24 6,60 3,68 70,00 19,05 1,02 0.0° 5.0° CD..S4T002 CC11 T6
3890853 CSBM4512125L 95 12,00 5,18 4,57 2,64 69,85 12,70 1,02 0.0° 5.0° CD..S4T002 CC09 T6
3890854 CSBM4512255L 95 12,00 5,18 4,57 2,64 69,85 25,40 1,02 0.0° 5.0° CD..S4T002 CC09 T6
2831528 CSBM5212125L 95 12,00 5,78 5,16 2,95 70,00 12,70 1,02 0.0° 5.0° CD..S4T002 CC11 T6
2831483 CSBM6412195L 95 12,00 7,24 6,60 3,68 70,00 19,05 1,02 0.0° 5.0° CD..S4T002 CC11 T6
3890855 CSBM6412325L 95 12,00 7,24 6,60 3,68 70,00 31,75 1,02 0.0° 5.0° CD..S4T002 CC11 T6
Tools for Small Hole Boring
WID_Master16_Turning_Circle_D010_D011_Metric_REBRAND.indd 11 10/30/15 3:17 PM
D12
LViWID M 16 T i Ci l D012 D013 M i REBRAND O b 15 2015 10 15 AM
widia.com
Small Hole Boring Bars for Turning
Clamping System S • Carbide
CCBM
order number catalogue number KRI D D min F L1 A aF° aP°
gage
insert
insert
screw Torx
right hand
2831801 CCBM51000R 90 5,00 5,94 3,18 100,58 1,02 0.0° 5.0° CD..S4T002 CC11 T6
3896025 CCBM61000R 90 6,00 7,08 3,73 100,33 1,19 0.0° 5.0° CD..S4T002 CC11 T6
2831277 CCBM81520R 90 8,00 9,04 4,70 152,15 2,36 0.0° 5.0° CD..S4T002 CC11 T6
2831826 CCBM51005R 95 5,00 5,94 3,02 100,58 1,02 0.0° 5.0° CD..S4T002 CC11 T6
2831311 CCBM61525R 95 6,00 7,08 3,73 152,15 1,19 0.0° 5.0° CD..S4T002 CC11 T6
2831821 CCBM61005R 95 6,00 7,09 3,73 100,33 1,19 0.0° 5.0° CD..S4T002 CC11 T6
2831289 CCBM81525R 95 8,00 9,04 4,70 152,15 2,36 0.0° 5.0° CD..S4T002 CC11 T6
2831832 CCBM41007R 97 3,96 4,57 2,41 100,33 1,02 0.0° 0.0° CD..S4T002 CC09 T6
2831324 CCBM41527R 97 4,00 4,57 2,41 152,40 1,02 0.0° 0.0° CD..S4T002 CC09 T6
left hand
3896023 CCBM51000L 90 5,00 5,94 3,18 100,58 1,02 0.0° 5.0° CD..S4T002 CC11 T6
3896024 CCBM61000L 90 6,00 7,08 3,73 100,33 1,19 0.0° 5.0° CD..S4T002 CC11 T6
3896026 CCBM61520L 90 6,00 7,09 3,73 152,15 1,19 0.0° 5.0° CD..S4T002 CC11 T6
3896028 CCBM81520L 90 8,00 9,04 4,70 152,15 2,36 0.0° 5.0° CD..S4T002 CC11 T6
2831807 CCBM51005L 95 5,00 5,94 3,02 100,58 1,02 0.0° 5.0° CD..S4T002 CC11 T6
2831025 CCBM51525L 95 5,00 5,94 3,02 152,40 1,02 0.0° 5.0° CD..S4T002 CC09 T6
2831307 CCBM61525L 95 6,00 7,08 3,73 152,15 1,19 0.0° 5.0° CD..S4T002 CC11 T6
2831791 CCBM61005L 95 6,00 7,09 3,73 100,33 1,19 0.0° 5.0° CD..S4T002 CC11 T6
3896027 CCBM81005L 95 8,00 9,04 4,70 101,60 2,36 0.0° 5.0° CD..S4T002 CC11 T6
2831283 CCBM81525L 95 8,00 9,04 4,70 152,40 2,36 0.0° 5.0° CD..S4T002 CC11 T6
2831813 CCBM41007L 97 3,96 4,57 2,41 100,33 1,02 0.0° 0.0° CD..S4T002 CC09 T6
3896002 CCBM41527L 97 4,00 4,57 2,41 152,40 1,02 0.0° 0.0° CD..S4T002 CC09 T6
Tools for Small Hole Boring
WID_Master16_Turning_Circle_D012_D013_Metric_REBRAND.indd 12 10/30/15 3:17 PM
D13
LViWID M 16 T i Ci l D012 D013 M i REBRANDO b 15 201510 15AM
widia.com
Small Hole Boring Bars for Turning
Clamping System S • Carbide Stepped
CCBM • STEPPED
order number catalogue number KRI D D min F L1 L4 A aF° aP°
gage
insert
insert
screw Torx
right hand
2831211 CCBM5312510R 90 12,00 5,94 3,18 88,90 50,80 3,18 0.0° 5.0° CD..S4T002 CC11 T6
2831188 CCBM6612320R 90 12,00 7,42 3,85 69,85 31,75 3,18 0.0° 5.0° CD..S4T002 CC11 T6
2831175 CCBM6612630R 90 12,00 7,42 3,86 101,60 63,50 3,18 0.0° 5.0° CD..S4T002 CC11 T6
2831127 CCBM5316510R 90 16,00 6,10 3,18 114,30 50,80 3,18 0.0° 5.0° CD..S4T002 CC11 T6
2831110 CCBM6516320R 90 16,00 7,42 3,86 95,25 31,75 3,18 0.0° 5.0° CD..S4T002 CC11 T6
2831265 CCBM4812225R 95 12,00 5,28 2,64 60,32 22,22 3,18 0.0° 5.0° CD..S4T002 CC09 T6
2831255 CCBM4812485R 95 12,00 5,28 2,64 85,73 47,63 3,18 0.0° 5.0° CD..S4T002 CC09 T6
2831244 CCBM5312255R 95 12,00 5,94 3,02 63,50 25,40 1,02 0.0° 5.0° CD..S4T002 CC11 T6
2831201 CCBM6612325R 95 12,00 7,24 3,68 69,85 31,75 3,18 0.0° 5.0° CD..S4T002 CC11 T6
3896019 CCBM6612635R 95 12,00 7,24 3,68 101,60 63,50 3,18 0.0° 5.0° CD..S4T002 CC11 T6
3896015 CCBM4816225R 95 16,00 5,28 2,64 85,72 22,23 3,18 0.0° 5.0° CD..S4T002 CC09 T6
3896017 CCBM4816485R 95 16,00 5,28 2,64 111,12 47,62 3,18 0.0° 5.0° CD..S4T002 CC09 T6
2831162 CCBM5316255R 95 16,00 5,94 3,02 88,90 25,40 3,18 0.0° 5.0° CD..S4T002 CC11 T6
2831139 CCBM5316515R 95 16,00 5,94 3,02 114,30 50,80 3,18 0.0° 5.0° CD..S4T002 CC11 T6
3896018 CCBM6516325R 95 16,00 7,24 3,68 95,25 31,75 3,18 0.0° 5.0° CD..S4T002 CC11 T6
left hand
2831194 CCBM6612325L 95 12,00 7,24 3,68 69,85 31,75 3,18 0.0° 5.0° CD..S4T002 CC11 T6
3896093 CCBM6612635L 95 12,00 7,24 3,68 101,60 63,50 3,18 0.0° 5.0° CD..S4T002 CC11 T6
2831157 CCBM5316255L 95 16,00 5,94 3,02 88,90 25,40 3,18 0.0° 5.0° CD..S4T002 CC11 T6
2831132 CCBM5316515L 95 16,00 5,94 3,02 114,30 50,80 3,18 0.0° 5.0° CD..S4T002 CC11 T6
2831117 CCBM6516325L 95 16,00 7,24 3,68 95,25 31,75 3,18 0.0° 5.0° CD..S4T002 CC11 T6
Tools for Small Hole Boring
WID_Master16_Turning_Circle_D012_D013_Metric_REBRAND.indd 13 10/30/15 3:17 PM
D14
LViWID M 16 T i Ci l D014 D015 M i REBRAND O b 15 2015 10 16 AM
widia.com
Small Hole Boring Bars for Turning
Clamping System S • Steel
FSBM
order number catalogue number KRI D D min D2 F L1 A aF° aP°
gage
insert
insert
screw Torx
right hand
2829554 FSBM61000R 90 6,00 7,06 6,20 3,71 101,60 1,02 0.0° 5.0° TD..07S102 FC11 T7
2829566 FSBM61005R 95 6,00 7,06 6,20 3,71 101,60 1,02 0.0° 5.0° TD..07S102 FC11 T7
left hand
3896211 FSBM61000L 90 6,00 7,06 6,20 3,71 101,60 1,02 0.0° 5.0° TD..07S102 FC11 T7
3896213 FSBM81000L 90 8,00 9,14 8,20 4,80 101,60 1,52 0.0° 5.0° TD..07S102 FC11 T7
2829545 FSBM81005L 95 8,00 9,14 8,20 4,80 101,60 1,52 0.0° 5.0° TD..07S102 FC11 T7
Tools for Small Hole Boring
WID_Master16_Turning_Circle_D014_D015_Metric_REBRAND.indd 14 10/30/15 3:17 PM
D15
LViWID M 16 T i Ci l D014 D015 M i REBRANDO b 15 201510 16AM
widia.com
Small Hole Boring Bars for Turning
Clamping System S • Steel Stepped
FSBM • STEPPED
order number catalogue number KRI D D min D2 F L1 L4 A aF° aP°
gage
insert
insert
screw Torx
right hand
3890858 FSBM6612320R 90 12,00 7,52 6,58 3,96 76,20 31,75 1,02 0.0° 5.0° TD..07S102 FC14 T7
2829472 FSBM8212250R 90 12,00 9,09 8,15 4,75 76,00 25,40 1,52 0.0° 5.0° TD..07S102 FC14 T7
2829448 FSBM8212380R 90 12,00 9,09 8,15 4,75 76,20 38,10 1,52 0.0° 5.0° TD..07S102 FC14 T7
3890860 FSBM6616190R 90 16,00 7,52 6,58 3,96 101,60 19,05 1,02 0.0° 5.0° TD..07S102 FC14 T7
2829533 FSBM5212125R 95 12,00 6,99 5,16 3,20 76,20 12,70 1,02 0.0° 5.0° TD..07S102 FC11 T7
3890857 FSBM5212255R 95 12,00 6,99 5,16 3,20 76,20 25,40 1,02 0.0° 5.0° TD..07S102 FC11 T7
2829508 FSBM6612195R 95 12,00 7,52 6,58 3,96 76,00 19,05 1,02 0.0° 5.0° TD..07S102 FC14 T7
2829459 FSBM8212385R 95 12,00 9,09 8,15 4,75 76,00 38,10 1,52 0.0° 5.0° TD..07S102 FC14 T7
3897011 FSBM5216125R 95 16,00 6,99 5,16 3,20 101,60 12,70 1,02 0.0° 5.0° TD..07S102 FC11 T7
3890862 FSBM6616325R 95 16,00 7,52 6,58 3,96 101,60 31,75 1,02 0.0° 5.0° TD..07S102 FC14 T7
2829429 FSBM6616195R 95 16,00 7,52 6,60 3,96 102,00 19,05 1,02 0.0° 5.0° TD..07S102 FC14 T7
left hand
2829442 FSBM8212380L 90 12,00 9,09 8,15 4,75 76,00 38,10 1,52 0.0° 5.0° TD..07S102 FC14 T7
3890861 FSBM6616320L 90 16,00 7,52 6,58 3,96 101,60 31,75 1,02 0.0° 5.0° TD..07S102 FC14 T7
3890856 FSBM5212125L 95 12,00 6,99 5,16 3,20 76,20 12,70 1,02 0.0° 5.0° TD..07S102 FC11 T7
Tools for Small Hole Boring
WID_Master16_Turning_Circle_D014_D015_Metric_REBRAND.indd 15 10/30/15 3:17 PM
D16
LViWID M 16 T i Ci l D016 D017 M i REBRAND O b 15 2015 10 16 AM
widia.com
Small Hole Boring Bars for Turning
Clamping System S • Carbide
FCBM
order number catalogue number KRI D D min F L1 A aF° aP°
gage
insert
insert
screw Torx
right hand
3896036 FCBM51000R 90 5,00 6,98 3,40 100,58 1,02 0.0° 5.0° TD..07S102 FC11 T7
3896031 FCBM61520R 90 6,00 7,06 3,70 152,40 1,19 0.0° 5.0° TD..07S102 FC11 T7
2829356 FCBM81520R 90 8,00 9,16 4,80 152,40 2,36 0.0° 5.0° TD..07S102 FC14 T7
2829390 FCBM61525R 95 6,00 7,06 3,71 152,40 1,19 0.0° 5.0° TD..07S102 FC11 T7
2829368 FCBM81525R 95 8,00 9,16 4,80 152,40 2,36 0.0° 5.0° TD..07S102 FC14 T7
left hand
3896035 FCBM51000L 90 5,00 6,98 3,40 100,58 1,02 0.0° 5.0° TD..07S102 FC11 T7
3896030 FCBM61520L 90 6,00 7,06 3,71 152,40 1,19 0.0° 5.0° TD..130805 FC11 T7
3896032 FCBM81520L 90 8,00 9,16 4,80 152,40 2,36 0.0° 5.0° TD..130805 FC11 T7
3896037 FCBM51005L 95 5,00 6,98 3,20 100,58 1,02 0.0° 5.0° TD..07S102 FC11 T7
2829385 FCBM61525L 95 6,00 7,06 3,71 152,40 1,19 0.0° 5.0° TD..07S102 FC11 T7
Tools for Small Hole Boring
WID_Master16_Turning_Circle_D016_D017_Metric_REBRAND.indd 16 10/30/15 3:17 PM
D17
LViWID M 16 T i Ci l D016 D017 M i REBRANDO b 15 201510 16AM
widia.com
Small Hole Boring Bars for Turning
Clamping System S • Carbide Stepped
FCBM • STEPPED
order number catalogue number KRI D D min F L1 L4 A aF° aP°
gage
insert
insert
screw Torx
right hand
3896072 FCBM6612630R 90 12,00 7,52 3,96 101,60 63,50 1,19 0.0° 5.0° TD..07S102 FC14 T7
2829268 FCBM8212790R 90 12,00 9,09 4,75 117,48 79,38 3,18 0.0° 5.0° TD..07S102 FC14 T7
3896069 FCBM5316250R 90 16,00 6,98 3,40 88,90 25,40 3,18 0.0° 5.0° TD..07S102 FC11 T7
3896084 FCBM6616320R 90 16,00 7,52 3,96 95,25 31,75 3,18 0.0° 5.0° TD..07S102 FC11 T7
3896086 FCBM8216380R 90 16,00 9,09 4,75 101,60 38,10 3,18 0.0° 5.0° TD..07S102 FC14 T7
3896095 FCBM8216790R 90 16,00 9,09 4,75 142,87 79,37 3,18 0.0° 5.0° TD..07S102 FC14 T7
2829350 FCBM5312255R 95 12,00 6,98 3,20 63,50 25,40 3,18 0.0° 5.0° TD..07S102 FC11 T7
2829323 FCBM6612325R 95 12,00 7,52 3,96 69,85 31,75 3,18 0.0° 5.0° TD..07S102 FC14 T7
3896083 FCBM6612635R 95 12,00 7,52 3,96 101,60 63,50 3,18 0.0° 5.0° TD..07S102 FC11 T7
2829301 FCBM8212385R 95 12,00 9,09 4,75 76,20 38,10 3,18 0.0° 5.0° TD..07S102 FC14 T7
2829279 FCBM8212795R 95 12,00 9,09 4,75 117,48 79,38 3,18 0.0° 5.0° TD..07S102 FC14 T7
3897085 FCBM5316255R 95 16,00 6,98 3,20 88,90 25,40 3,18 0.0° 5.0° TD..07S102 FC11 T7
3790247 FCBM6616325R 95 16,00 7,52 3,96 95,25 31,75 3,18 0.0° 5.0° TD..07S102 FC14 T7
3786518 FCBM6616635R 95 16,00 7,52 3,96 127,00 63,50 3,18 0.0° 5.0° TD..07S102 FC14 T7
3786519 FCBM8216795R 95 16,00 9,09 4,75 117,48 79,38 3,18 0.0° 5.0° TD..07S102 FC14 T7
left hand
3896067 FCBM5312510L 90 12,00 6,98 3,40 88,90 50,80 3,18 0.0° 5.0° TD..07S102 FC11 T7
2829344 FCBM5312255L 95 12,00 6,98 3,20 63,50 25,40 3,18 0.0° 5.0° TD..07S102 FC11 T7
3896068 FCBM5312515L 95 12,00 6,98 3,20 88,90 50,80 3,18 0.0° 5.0° TD..07S102 FC11 T7
2829319 FCBM6612325L 95 12,00 7,52 3,96 69,85 31,75 3,18 0.0° 5.0° TD..07S102 FC14 T7
2829295 FCBM8212385L 95 12,00 9,09 4,75 76,20 38,10 3,18 0.0° 5.0° TD..07S102 FC14 T7
3896070 FCBM5316255L 95 16,00 6,98 3,20 88,90 25,40 3,18 0.0° 5.0° TD..07S102 FC11 T7
3896085 FCBM6616325L 95 16,00 7,52 3,96 95,25 31,75 3,18 0.0° 5.0° TD..07S102 FC11 T7
3896087 FCBM8216385L 95 16,00 9,09 4,75 101,60 38,10 3,18 0.0° 5.0° TD..07S102 FC14 T7
Tools for Small Hole Boring
WID_Master16_Turning_Circle_D016_D017_Metric_REBRAND.indd 17 10/30/15 3:17 PM
D18
LViWID M 16 T i Ci l D018 D019 M i REBRAND O b 15 2015 10 16 AM
widia.com
Small Hole Boring Bars for Turning
Clamping System S • Steel
QSBM
order number catalogue number KRI D D min D2 F L1 A aF° aP°
gage
insert
insert
screw Torx
right hand
3886552 QSBM101275R 95 10,00 11,15 10,21 5,79 127,00 3,20 0.0° 5.0° TP..110202 QC21 T9
left hand
3886550 QSBM101270L 90 10,00 11,15 10,21 5,79 127,00 3,20 0.0° 5.0° TP..110202 QC21 T9
3886943 QSBM121520L 90 12,00 13,16 12,19 6,81 152,40 4,00 0.0° 5.0° TP..110202 QC26 T9
3886551 QSBM101275L 95 10,00 11,15 10,21 5,79 127,00 3,20 0.0° 5.0° TP..110202 QC21 T9
Tools for Small Hole Boring
WID_Master16_Turning_Circle_D018_D019_Metric_REBRAND.indd 18 10/30/15 3:17 PM
D19
LViWID M 16 T i Ci l D018 D019 M i REBRANDO b 15 201510 16AM
widia.com
Small Hole Boring Bars for Turning
Clamping System S • Steel Stepped
QSBM • STEPPED
order number catalogue number KRI D D min D2 F L1 L4 A aF° aP°
gage
insert
insert
screw Torx
right hand
2825013 QSBM9912480R 90 12,00 11,12 9,91 5,61 95,25 47,63 2,03 0.0° 5.0° TP..110202 QC21 T9
3890865 QSBM9916480R 90 16,00 11,12 9,91 5,61 107,95 47,63 2,03 0.0° 5.0° TP..110202 QC21 T9
3886949 QSBM15920630R 90 20,00 17,47 15,88 8,97 114,30 63,50 2,49 0.0° 5.0° TP..110202 QC26 T9
2825052 QSBM9912295R 95 12,00 11,12 9,91 5,61 95,25 28,58 2,03 0.0° 5.0° TP..110202 QC21 T9
2825024 QSBM9912485R 95 12,00 11,12 9,91 5,61 95,25 47,63 2,03 0.0° 5.0° TP..110202 QC21 T9
3890864 QSBM9916295R 95 16,00 11,12 9,91 5,61 107,95 28,58 2,03 0.0° 5.0° TP..110202 QC21 T9
2824993 QSBM9916485R 95 16,00 11,12 9,91 5,61 107,95 47,63 2,03 0.0° 5.0° TP..110202 QC21 T9
3886945 QSBM1316385R 95 16,00 14,30 12,95 7,52 107,95 38,10 2,03 0.0° 5.0° TP..110202 QC26 T9
3886948 QSBM1316635R 95 16,00 14,30 12,95 7,52 107,95 63,50 2,03 0.0° 5.0° TP..110202 QC26 T9
2824950 QSBM9920385R 95 20,00 11,12 9,91 5,61 101,60 38,10 2,03 0.0° 5.0° TP..110202 QC21 T9
3886950 QSBM15920635R 95 20,00 17,47 15,88 8,97 114,30 63,50 2,49 0.0° 5.0° TP..110202 QC26 T9
left hand
2825019 QSBM9912485L 95 12,00 11,12 9,91 5,61 95,25 47,63 2,03 0.0° 5.0° TP..110202 QC21 T9
3896089 QSBM9916295L 95 16,00 11,12 9,91 5,61 107,95 28,58 2,03 0.0° 5.0° TP..110202 QC21 T9
3886944 QSBM1316385L 95 16,00 14,30 12,95 7,52 107,95 38,10 2,03 0.0° 5.0° TP..110202 QC26 T9
3886947 QSBM1316635L 95 16,00 14,30 12,95 7,52 107,95 63,50 2,03 0.0° 5.0° TP..110202 QC26 T9
2824945 QSBM9920385L 95 20,00 11,12 9,91 5,61 101,60 38,10 2,03 0.0° 5.0° TP..110202 QC21 T9
Tools for Small Hole Boring
WID_Master16_Turning_Circle_D018_D019_Metric_REBRAND.indd 19 10/30/15 3:17 PM
D20
LViWID M 16 T i Ci l D020 D021 M i REBRAND N b 18 2015 7 36 AM
widia.com
Small Hole Boring Bars for Turning
Clamping System S • Carbide
QCBM
order number catalogue number KRI D D min F L1 A aF° aP°
gage
insert
insert
screw Torx
right hand
3854445 QCBM102540R 90 10,00 11,15 5,79 254,00 3,20 0.0° 5.0° TP..110202 QC21 T9
2824776 QCBM102545R 95 10,00 11,15 5,79 254,00 3,20 0.0° 5.0° TP..110202 QC21 T9
2824747 QCBM122545R 95 12,00 13,16 6,81 254,00 4,70 0.0° 5.0° TP..110202 QC21 T9
left hand
3896043 QCBM122540L 90 12,00 13,16 6,81 254,00 4,70 0.0° 5.0° TP..110202 QC26 T9
3896044 QCBM122545L 95 12,00 13,16 6,81 254,00 4,70 0.0° 5.0° TP..110202 QC26 T9
Tools for Small Hole Boring
QSOM
order number catalogue number KRI D D min D2 F L1 L4 FS W A aF° aP°
gage
insert
insert
screw Torx
right hand
2824819 QSOM9516385R 95 16,00 16,51 9,50 0,64 95,25 38,10 10,63 10,70 2,03 0.0° 5.0° TP..110202 QC26 T9
Clamping System S • Steel
WID_Master16_Turning_Circle_D020_D021_Metric_REBRAND.indd 20 11/18/15 7:37 AM
D21
LViWID M 16 T i Ci l D020 D021 M i REBRANDN b 18 20157 36AM
widia.com
Small Hole Boring Bars for Turning
Clamping System S • Steel
SSBM
order number catalogue number KRI D D min D2 F L1 A aF° aP°
gage
insert
insert
screw Torx
right hand
3886968 SSBM202030R 90 20,00 21,23 20,19 10,90 203,20 4,00 0.0° 5.0° TP..160302 SC30 T10
left hand
3886967 SSBM202030L 90 20,00 21,23 20,19 10,90 203,20 4,00 0.0° 5.0° TP..160302 SC30 T10
3886969 SSBM202035L 95 20,00 21,23 20,19 10,90 203,20 4,00 0.0° 5.0° TP..160302 SC30 T10
Tools for Small Hole Boring
SCBM
order number catalogue number KRI D D min F L1 A aF° aP°
gage
insert
insert
screw Torx
right hand
3895892 SCBM162540R 90 16,00 17,25 8,89 254,00 5,51 0.0° 5.0° TP..160302 SC30 T10
3896004 SCBM162545R 95 16,00 17,25 8,89 254,00 5,51 0.0° 5.0° TP..160302 SC30 T10
3896006 SCBM202545R 95 20,00 21,25 10,90 254,00 7,11 0.0° 5.0° TP..160302 SC30 T10
left hand
3895891 SCBM162540L 90 16,00 17,25 8,89 254,00 5,51 0.0° 5.0° TP..160302 SC30 T10
3896005 SCBM202540L 90 20,00 21,25 10,90 254,00 7,11 0.0° 5.0° TP..160302 SC30 T10
3896003 SCBM162545L 95 16,00 17,25 8,89 254,00 5,51 0.0° 5.0° TP..160302 SC30 T10
3896091 SCBM202545L 95 20,00 21,25 10,90 254,00 7,11 0.0° 5.0° TP..160302 SC30 T10
Clamping System S • Carbide
WID_Master16_Turning_Circle_D020_D021_Metric_REBRAND.indd 21 11/18/15 7:37 AM
D22
LViWID M 16 T i Ci l D022 D023 M i REBRAND O b 15 2015 10 17 AM
widia.com
Small Hole Boring Bars for Turning
Clamping System S • Carbide
SDBM
order number catalogue number KRI D D min D2 F L1 A aF° aP°
gage
insert
insert
screw Torx
right hand
3896011 SDBM162540R 90 16,00 17,25 — 8,89 254,00 5,51 0.0° 5.0° TP..160302 SC30 T10
3896014 SDBM202540R 90 20,00 21,25 — 10,90 254,00 7,11 0.0° 5.0° TP..160302 SC30 T10
2822085 SDBM162545R 95 16,00 17,25 16,13 8,89 254,00 5,54 0.0° 5.0° TP..160302 SC30 T10
3896092 SDBM202545R 95 20,00 21,25 — 10,90 254,00 7,11 0.0° 5.0° TP..160302 SC30 T10
left hand
3896010 SDBM162540L 90 16,00 17,25 — 8,89 254,00 5,51 0.0° 5.0° TP..160302 SC30 T10
3896013 SDBM202540L 90 20,00 21,25 — 10,90 254,00 7,11 0.0° 5.0° TP..160302 SC30 T10
3896012 SDBM162545L 95 16,00 17,25 — 8,89 254,00 5,51 0.0° 5.0° TP..160302 SC30 T10
3897084 SDBM202545L 95 20,00 21,25 — 10,90 254,00 7,11 0.0° 5.0° TP..160302 SC30 T10
Tools for Small Hole Boring
Clamping System S • Steel
SSOM
order number catalogue number KRI D D min D2 F L1 L4 FS W A aF° aP°
gage
insert
insert
screw Torx
right hand
3896090 SSOM1325380R 90 24,99 24,61 12,70 1,78 95,25 38,10 14,46 16,24 3,00 0.0° 5.0° TPHB160302 SC30 T10
3890867 SSOM1325630R 90 24,99 24,61 12,70 1,78 120,65 63,50 14,46 16,24 3,00 0.0° 5.0° TPHB160302 SC30 T10
3890866 SSOM1325385R 95 24,99 24,61 12,70 1,78 95,25 38,10 14,40 16,18 3,00 0.0° 5.0° TPHB160302 SC30 T10
3890868 SSOM1325635R 95 24,99 24,61 12,70 1,78 120,65 63,50 14,40 16,18 3,00 0.0° 5.0° TPHB160302 SC30 T10
WID_Master16_Turning_Circle_D022_D023_Metric_REBRAND.indd 22 10/30/15 3:17 PM
D23
LViWID M 16 T i Ci l D022 D023 M i REBRANDO b 15 201510 17AM
widia.com
Small Hole Boring Bars for Turning
Clamping System S • Steel
GSBMW
order number catalogue number KRI D D min D2 F L1 A aF° aP°
gage
insert
insert
screw Torx
right hand
2828122 GSBMW61003R 93 6,00 6,78 6,21 3,43 101,60 1,02 -3.0° 0.0° WP..S30104 CT11 T6
3886549 GSBMW81003R 93 8,00 8,10 8,18 4,42 101,60 2,40 -3.0° 0.0° WP..S30104 CT11 T6
left hand
2828116 GSBMW61003L 93 6,00 6,78 6,21 3,43 101,60 1,02 -3.0° 0.0° WP..S30104 CT11 T6
3886548 GSBMW81003L 93 8,00 8,10 8,18 4,42 101,60 2,40 -3.0° 0.0° WP..S30104 CT11 T6
Tools for Small Hole Boring
Clamping System S • Carbide
GCBMW
order number catalogue number KRI D D min F L1 A aF° aP°
gage
insert
insert
screw Torx
right hand
3896040 GCBMW51523R 93 5,00 6,60 3,20 152,40 1,02 -3.0° 0.0° WP..S30104 CT11 T6
2827711 GCBMW61523R 93 6,00 6,78 3,43 152,40 1,19 -3.0° 0.0° WP..S30104 CT11 T6
left hand
3896039 GCBMW51523L 93 5,00 6,60 3,20 152,40 1,02 -3.0° 0.0° WP..S30104 CT11 T6
2827705 GCBMW61523L 93 6,00 6,78 3,43 152,40 1,19 -3.0° 0.0° WP..S30104 CT11 T6
3897012 GCBMW81523L 93 8,00 8,80 4,42 152,40 2,36 -3.0° 0.0° WP..S30104 CT11 T6
WID_Master16_Turning_Circle_D022_D023_Metric_REBRAND.indd 23 10/30/15 3:17 PM
D24
LViWID M 16 T i Ci l D024 D025 M i REBRAND O b 15 2015 10 18 AM
widia.com
Small Hole Boring Bars for Turning
Clamping System S • Steel
QSBMW
order number catalogue number KRI D D min D2 F L1 A aF° aP°
gage
insert
insert
screw Torx
right hand
3393828 QSBMW121523R 93 12,00 12,90 12,19 6,55 152,40 4,00 -3.0° 0.0° WP..040204 QTM20 T7
left hand
3886952 QSBMW101273L 93 10,00 10,94 10,70 5,59 127,00 3,20 -3.0° 0.0° WP..040204 QTM20 T7
Tools for Small Hole Boring
Clamping System S • Carbide
QCBMW
order number catalogue number KRI D D min F L1 A aF° aP°
gage
insert
insert
screw Torx
right hand
3782378 QCBMW102543R 93 10,00 10,95 5,59 254,00 3,20 -3.0° 0.0° WP..040204 QTM20 T7
left hand
3896045 QCBMW102543L 93 10,00 10,95 5,59 254,00 3,20 -3.0° 0.0° WP..040204 QTM20 T7
3896046 QCBMW122543L 93 12,00 12,90 6,55 254,00 4,70 -3.0° 0.0° WP..040204 QTM20 T7
WID_Master16_Turning_Circle_D024_D025_Metric_REBRAND.indd 24 10/30/15 3:17 PM
D25
LViWID M 16 T i Ci l D024 D025 M i REBRANDO b 15 201510 18AM
widia.com
Small Hole Boring Bars for Profiling
Clamping System S • Steel
CSPM
order number catalogue number KRI D D min D2 F CD L L1 L4 A aF° aP°
gage
insert
insert
screw Torx
right hand
2831399 CSPM71225225R 67.5 12,00 10,16 6,60 6,60 3,30 104,00 101,60 25,40 1,02 0.0° 0.0° GC..050102 CT15 T6
3758942 CSPM81232225R 67.5 12,00 11,37 8,18 7,01 2,92 105,16 101,60 31,75 1,02 0.0° 0.0° GC..050102 CT15 T6
2831411 CSPM712255R 95.0 12,00 9,14 6,60 5,59 2,29 101,60 101,60 25,40 1,02 0.0° 0.0° GC..050102 CT15 T6
left hand
2831394 CSPM71225225L 67.5 12,00 10,16 6,60 6,60 3,30 104,00 101,60 25,40 1,02 0.0° 0.0° GPHW050102 CT15 T6
2831378 CSPM81232225L 67.5 12,00 11,38 8,18 7,01 2,92 104,10 101,60 31,75 1,02 0.0° 0.0° GC..050102 CT15 T6
2831405 CSPM712255L 95.0 12,00 9,14 6,60 5,59 2,29 101,60 101,60 25,40 1,02 0.0° 0.0° GP..050102 CT15 T6
2831383 CSPM812325L 95.0 12,00 10,74 8,20 6,38 2,27 101,60 101,60 31,75 1,02 0.0° 0.0° GP..050102 CT15 T6
Tools for Small Hole Boring
NOTE: KRI shown as 67,5°.NOTE: KRI shown as 95°.
WID_Master16_Turning_Circle_D024_D025_Metric_REBRAND.indd 25 10/30/15 3:17 PM
D26
LViWID M 16 T i Ci l D026 D027 M i REBRAND O b 15 2015 10 18 AM
widia.com
Small Hole Boring Bars for Profi ling
Clamping System S • Carbide
CCPM
order number catalogue number KRI D D min F CD L L1 A aF° aP°
gage
insert
insert
screw Torx
right hand
2831010 CCPM6152225R 67.5 6,00 10,16 6,60 3,51 154,61 152,40 1,19 0.0° 0.0° GP..050102 CT15 T6
2831020 CCPM61525R 95.0 6,00 9,14 5,59 2,49 152,40 152,40 1,19 0.0° 0.0° GP..050102 CT15 T6
left hand
2831004 CCPM6152225L 67.5 6,00 10,15 6,60 3,51 152,61 152,40 1,19 0.0° 0.0° GP..050102 CT15 T6
2830980 CCPM8152225L 67.5 8,00 11,38 7,01 2,92 155,96 152,40 2,36 0.0° 0.0° GP..050102 CT15 T6
3897899 CCPM61525L 95.0 6,00 9,14 5,59 2,49 152,40 152,40 1,19 0.0° 0.0° GP..050102 CT15 T6
3896022 CCPM81525L 95.0 8,00 10,74 6,38 2,28 152,40 152,40 2,23 0.0° 0.0° GP..050102 CT15 T6
Tools for Small Hole Boring
NOTE: KRI shown as 67,5°.
NOTE: KRI shown as 95°.
GSPM
order number catalogue number KRI D D min D2 F CD L L1 L4 A aF° aP°
gage
insert
insert
screw Torx
right hand
3518694 GSPM1316515R 95.0 16,00 16,00 12,95 9,50 3,02 127,00 127,00 50,80 2,49 0.0° 0.0° GC..060202 GT21 T7
left hand
3897894 GSPM101638225L 67.5 16,00 13,72 9,78 8,59 3,70 105,01 101,60 38,10 2,49 0.0° 0.0° GC..060202 GT21 T7
3897896 GSPM131651225L 67.5 16,00 16,89 12,95 10,16 3,68 130,90 127,00 50,80 2,49 0.0° 0.0° GC..060202 GT21 T7
3897895 GSPM1016385L 95.0 16,00 13,08 9,78 7,93 3,04 114,30 114,30 38,10 2,49 0.0° 0.0° GC..060202 GT21 T7
3896052 GSPM1316515L 95.0 16,00 16,00 12,95 9,50 3,02 127,00 127,00 50,80 2,49 0.0° 0.0° GC..060202 GT21 T7
NOTE: KRI shown as 67,5°.
NOTE: KRI shown as 95°.
Clamping System S • Steel
WID_Master16_Turning_Circle_D026_D027_Metric_REBRAND.indd 26 10/30/15 3:17 PM
D27
LViWID M 16 T i Ci l D026 D027 M i REBRANDO b 15 201510 18AM
widia.com
Small Hole Boring Bars for Profiling
Clamping System S • Carbide
GCPM
order number catalogue number KRI D D min F CD L L1 A aF° aP°
gage
insert
insert
screw Torx
right hand
2827656 GCPM10254225R 67.5 10,00 14,20 8,81 3,68 258,47 254,00 3,20 0.0° 0.0° GC..060202 GT21 T7
3897906 GCPM12254225R 67.5 12,00 16,18 9,80 3,71 257,86 254,00 4,70 0.0° 0.0° GC..060202 GT21 T7
3896073 GCPM16254225R 67.5 16,00 20,09 11,76 3,67 258,01 254,00 5,51 0.0° 0.0° GC..060202 GT21 T7
3897904 GCPM102545R 95.0 10,00 13,54 8,15 3,06 254,00 254,00 3,20 0.0° 0.0° GC..060202 GT21 T7
3759184 GCPM122545R 95.0 12,00 15,52 9,14 3,05 254,00 254,00 4,70 0.0° 0.0° GC..060202 GT21 T7
3897909 GCPM162545R 95.0 16,00 19,43 11,10 3,01 254,00 254,00 5,51 0.0° 0.0° GC..060202 GT21 T7
left hand
3897903 GCPM10254225L 67.5 10,00 14,20 8,81 3,72 257,49 254,00 3,20 0.0° 0.0° GC..060202 GT21 T7
3897905 GCPM12254225L 67.5 12,00 16,18 9,80 3,71 257,86 254,00 4,70 0.0° 0.0° GC..060202 GT21 T7
3897908 GCPM16254225L 67.5 16,00 20,07 11,76 3,67 258,02 254,00 5,51 0.0° 0.0° GC..060202 GT21 T7
3782377 GCPM102545L 95.0 10,00 13,54 8,15 3,02 254,00 254,00 3,20 0.0° 0.0° GC..060202 GT21 T7
3897907 GCPM122545L 95.0 12,00 15,52 9,14 3,05 254,00 254,00 4,70 0.0° 0.0° GC..060202 GT21 T7
2827644 GCPM162545L 95.0 16,00 19,43 11,10 3,01 254,00 254,00 5,51 0.0° 0.0° GC..060202 GT21 T7
Tools for Small Hole Boring
NOTE: KRI shown as 67,5°.
NOTE: KRI shown as 95°.
WID_Master16_Turning_Circle_D026_D027_Metric_REBRAND.indd 27 10/30/15 3:17 PM
D28
LViWID M 16 T i Ci l D028 D029 M i REBRAND O b 15 2015 10 18 AM
widia.com
Small Hole Boring Bars for Grooving and Threading
Clamping System S • Steel
NOTE: Refer to insert design for cutting depth, cutting width, and blind hole limitations.
CSMM
order number catalogue number D D min D2 F L1 A aF° aP°
gage
insert
insert
screw Torx
right hand
2831048 CSMM6760R 6,00 7,92 6,60 4,44 76,20 1,02 0.0° 0.0° CD.50302R CC11 T6
Tools for Small Hole Boring
WID_Master16_Turning_Circle_D028_D029_Metric_REBRAND.indd 28 10/30/15 3:18 PM
D29
LViWID M 16 T i Ci l D028 D029 M i REBRANDO b 15 201510 18AM
widia.com
Tools For Small Hole Boring
Sleeves
CSM
order number catalogue number D1 D D2 LS L
2832838 CSM22156 3,96 22,00 27,94 50,80 63,50
2832832 CSM22187 4,75 22,00 27,94 50,80 63,50
2832827 CSM22250 6,36 22,00 27,94 50,80 63,50
2832820 CSM22312 7,93 22,00 27,94 50,80 63,50
2832813 CSM22375 9,53 22,00 27,94 50,80 63,50
2832809 CSM22500 12,70 22,00 27,94 50,80 63,50
Tools for Small Hole Boring
WID_Master16_Turning_Circle_D028_D029_Metric_REBRAND.indd 29 10/30/15 3:18 PM
D30
LViWID M 16 T i Ci l D030 D031 M i REBRAND O b 15 2015 10 19 AM
widia.com
How Do Catalogue Numbers Work?
Each character in our catalogue number signi es a speci c trait of that
product. Use the following key columns and corresponding images
to easily identify which attributes apply.
CDHBS4T002
Small Hole Boring
Catalogue Numbering System
CD H B S4
Insert Shape Insert Clearance
Angle
Tolerance Class Insert
Features
Size
T60° B
Tolerances apply prior
to edge prep and coating.
C80°
C
G45°
45°
RεRε
W80°
D
P
Rε
D = Theoretical diameter of
the insert inscribed circle
S = Thickness
B = See gures below
“D”
mm
Code for metric
cutting edge length
“L10”
CGTW
3,97 S4 05 06 —
4,06 — — 07 —
4,76 04 06 08 S3
6,35 06 — 11 04
9,53 09 — 16 06
9,80 — — 17 —
Partly cylindrical
hole, 40–60°
countersink,
single-sided
Partly cylindrical
hole, 70–90°
countersink,
single-sided
without chipbreaker
without chipbreaker
with chipbreaker
with chipbreaker
W
B
T
H
tolerance
class
tolerance
on “D”
tolerance
on “B”
tolerance
on “S”
C ±0,025 ±0,013 ±0,025
H ±0,013 ±0,013 ±0,025
E ±0,025 ±0,025 ±0,025
G ±0,025 ±0,025 ±0,013
M See tables on next page ±0,013
U See tables on next page ±0,013
WID_Master16_Turning_Circle_D030_D031_Metric_REBRAND.indd 30 10/30/15 3:18 PM
D31
LViWID M 16 T i Ci l D030 D031 M i REBRANDO b 15 201510 19AM
widia.com
CDHBS4T002
Small Hole Boring
Catalogue Numbering System
T0 02
Thickness Corner
Radius “R¡”
Hand of Insert
(optional)
Cutting Edge Condition
or Chip Control Features
(optional)
Tip Style
(optional)
R = Right hand HP = High positive Symbol
M
L = Left hand LF = Light nishing
Usage
Mini tip
By referencing this easy-to-use guide, you can
identify the correct product to meet your needs.
symbol
mm
thickness
mm
T0 1,00; 1,02
01 1,59; 1,58
T1 1,98; 1,91
02 2,38; 2,36
03 3,18
T3 3,97
S1 1,19
symbol
mm
corner
radius
mm
X0 0,04; 0,05
01 0,1
02 0,2; 0,18
04 0,4; 0,38
05 0,5
08 0,8
09 0,9
12 1,2
16 1,6
± Tolerance on “D” ± Tolerance on “B”
Class M Tolerance Class U
Tolerance Class M Tolerance Class U
Tolerance
“D”
Shapes
S, T, C,
R, & W
Shape
D
Shape
V
Shapes
S, T, & C “D”
Shapes
S, T, C,
R, & W
Shape
D
Shape
V
Shapes
S, T, & C
mm mm mm mm mm mm mm mm mm mm
3,97 0,05 –––
3,97 0,08 –– –
4,76 0,05 – – 0,08 4,76 0,08 – – 0,13
5,56 0,05 0,05 0,05 0,08 5,56 0,08 0,11 – 0,13
6,35 0,05 0,05 0,05 0,08 6,35 0,08 0,11 – 0,13
7,94 0,05 0,05 0,05 0,08 7,94 0,08 0,11 – 0,13
9,52 0,05 0,05 0,05 0,08 9,52 0,08 0,11 0,18 0,13
11,11 0,08 0,08 0,08 0,13 11,11 0,13 0,15 ––
12,70 0,08 0,08 0,08 0,13 12,70 0,13 0,15 0,25 0,20
14,29 0,08 0,08 0,08 0,13 14,29 0,13 0,15 ––
15,88 0,10 0,10 0,10 0,18 15,88 0,15 0,18 –0,27
17,46 0,10 0,10 0,10 0,18 17,46 0,15 0,18 – 0,27
19,05 0,10 0,10 0,10 0,18 19,05 0,15 0,18 – 0,27
22,22 0,13 – – 0,25 22,22 0,15 – –0,38
25,40 0,13 – – 0,25 25,40 0,18 – – 0,38
31,75 0,15 – – 0,25 31,75 0,20 – – 0,38
WID_Master16_Turning_Circle_D030_D031_Metric_REBRAND.indd 31 10/30/15 3:18 PM
D32 widia.com
The WIDIA
™
three-step insert selection system makes choosing and
applying the most productive tool easy. Tool recommendations are
based on six workpiece material groups.
1 Select the Insert Geometry:
Based on the needed depth of cut and feed rate,
choose the geometry that best matches your needs.
2 Select the Grade:
Determine your cutting conditions, and choose the proper grade.
Small Hole Boring • Insert Selection Guide
TN7–CM1 for Steel
ALO–CM1 for Stainless Steel
ISO 513
P
wear resistance = harder
toughness = softer
01 10 20 30 40
TN7 — High edge strength and wear-resistant cermet. Finishing to semi- nishing
of carbon, alloy, and stainless steels at medium to high speeds.
TN7 ALO — Can withstand light interruptions. Alumina coating enables
higher cutting speeds.
ALO CG6 — High-speed, general-purpose grade for all kinds of steel and cast iron.
CG6 CG55 — High edge strength and wear resistance. Reduces problems with
built-up edge. Superior thermal deformation resistance and
depth-of-cut notch resistance.
CG55
CG5 CG5 — Best at low speeds. Will handle interruptions and high feed rates.
CM1 CM1 — For heavy turning and heavily interrupted cuts.
Hard
Metal
Coated
ISO 513
M
wear resistance = harder
ALO — Can withstand light interruptions. Alumina coating enables
higher cutting speeds.
C3 and C25—Good wear resistance with some toughness.
C2 — Excellent abrasion resistance for machining cast irons,
austenitic stainless steels,non-ferrous metals, non-metals,
and most high-temperature alloys.
CG6 — High-speed, general-purpose grade for all kinds of steel and cast iron.
CG55 — High edge strength and wear resistance. Reduces problems with
built-up edge.Superior thermal deformation resistance and
depth-of-cut notch resistance.
CG5 — Best at low speeds. Will handle interruptions and high feed rates.
CM1 — For heavy turning and heavily interrupted cuts.
toughness = softer
01 10 20 30 40
Hard
Metal
Coated
ALO
C3 and C25
C2
CG6
CG55
CG5
CM1
WID_Master16_Turning_Circle_D032_D033_Metric_REBRAND.indd 32 11/11/15 5:32 PM
D33
widia.com
Small Hole Boring • Insert Selection Guide
3 Select the Cutting Speed:
In the foldout speed and feed chart, establish your cutting speed
and obtain your optimal starting conditions and range.
TN7–CM1 for Cast Iron
ISO 513
K
wear resistance = harder
TN7 — High edge strength and wear-resistant cermet.
ALO — Can withstand light interruptions. Alumina coating enables
higher cutting speeds.
CG6 — High-speed, general-purpose grade for all kinds of steel and cast iron.
CG55 — High edge strength and wear resistance. Reduces problems with
built-up edge. Superior thermal deformation resistance and
depth-of-cut notch resistance.
C3 and C25 — Good wear resistance with some toughness.
C2 — Excellent abrasion-resistance for machining cast irons,
austenitic stainless steels, non-ferrous metals, non-metals,
and most high-temperature alloys.
CG5 — Best at low speeds. Will handle interruptions and high feed rates.
CM1 — For heavy turning and heavily interrupted cuts.
toughness = softer
01 10 20 30 40
TN7
ALO
CG6
CG55
C3 and C25
C2
CG5
CM1
Hard
Metal
Coated
PSteel
MStainless Steel
KCast Iron
NNon-Ferrous
SHigh-Temp Alloys
HHardened Materials
C3–CM1 for High-Temperature Alloys
ISO 513
S
wear resistance = harder
C3 and C25 — Good wear resistance with some toughness.
C2 — Excellent abrasion resistance for machining cast irons, austenitic
stainless steels, non-ferrous metals, non-metals, and most
high-temperature alloys.
CG5 — Best at low speeds. Will handle interruptions and high feed rates.
CM1 — For heavy turning and heavily interrupted cuts.
toughness = softer
01 10 20 30 40
C3 and C25
C2
CG5
CM1
Hard
Metal
Coated
WID_Master16_Turning_Circle_D032_D033_Metric_REBRAND.indd 33 11/11/15 5:32 PM
D34
LViWID M 16 T i Ci l D034 D035 M i REBRAND N b 11 2015 7 43 AM
widia.com
Small Hole Boring
Chipbreaker Geometries
Single-Sided, Positive Inserts
..HB
Flat inserts. Peripheral ground for best surface quality and reduced
cutting pressure. Very stable cutting edge offers maximum rigidity. P
ap
M
depth of cut (mm)
K
feed rate (mm) fn
..HB-M
Cubic Boron Nitride (CBN) or Polycrystalline Diamond (PCD) tip for high-temp alloys
and non-ferrous machining. Very stable cutting edge offers maximum rigidity.
ap
depth of cut (mm)
K
feed rate (mm) fn
..HT
Peripheral ground insert chipbreaker. Good chip control. Geometry for
general-purpose applications. P
ap
M
depth of cut (mm)
K
feed rate (mm) fn
..LF
Geometry for general-purpose applications. Very good chip control.
Recommended for general nish machining. P
ap
depth of cut (mm)
feed rate (mm) fn
WID_Master16_Turning_Circle_D034_D035_Metric_REBRAND.indd 34 11/11/15 9:24 AM
D35
LViWID M 16 T i Ci l D034 D035 M i REBRANDN b 11 20157 43AM
widia.com
Small Hole Boring
Chipbreaker Geometries
Flat Top-Type Inserts
Chipbreaker Geometry ..HB, ..HB-M, ..HW
• Suitable for interrupted cuts.
• Use when chip control is not critical.
Pressed Chipbreaker-Type Inserts
Chipbreaker Geometry ..LF
• Suitable for moderate interruption of cuts.
• Use when chip control is a concern.
Geometry Selection Criteria
WID_Master16_Turning_Circle_D034_D035_Metric_REBRAND.indd 35 11/11/15 9:24 AM
D36
LViWID M 16 T i Ci l D036 D037 M i REBRAND O b 15 2015 10 20 AM
widia.com
Small Hole Boring
Chipbreaker Geometries
Single-Sided, Positive Inserts
HP
High positive-type chipbreaker. Peripheral ground for best surface quality
and reduced cutting pressure. Recommended for high-temp alloys and
non-ferrous machining.
P
ap
M
depth of cut (mm)
feed rate (mm) fn
..HW
Flat insert for pro ling. Very stable cutting edge offers maximum rigidity. P
ap
M
depth of cut (mm)
feed rate (mm) fn
..HH
Peripheral ground for best surface quality and reduced cutting pressure.
For ne to medium nishes. P
ap
M
depth of cut (mm)
feed rate (mm) fn
..HH-R/L
Ground-in chipbreaker. Peripheral ground for best surface quality and
reduced cutting pressure.
*Right-hand inserts used in left-hand bars ONLY. Left-hand inserts
used in right-hand bars ONLY.
P
ap
depth of cut (mm)
feed rate (mm) fn
WID_Master16_Turning_Circle_D036_D037_Metric_REBRAND.indd 36 10/30/15 3:18 PM
D37
LViWID M 16 T i Ci l D036 D037 M i REBRANDO b 15 201510 20AM
widia.com
Small Hole Boring
Chipbreaker Geometries
Pressed Chipbreaker-Type Inserts
with Ground Periphery
Chipbreaker Geometry ..HH, ..HT, HP
• Suitable for light to moderate interruption of cuts.
• Use when chip control is a concern.
• Superior surface nish and closer tolerance on workpiece.
Ground-In Chipbreaker-Type Inserts
Chipbreaker Geometry ..HH-R/L
• Suitable for smooth cuts.
• Use when chip control is a concern.
• Superior surface nish and closer tolerance on workpiece.
Geometry Selection Criteria
WID_Master16_Turning_Circle_D036_D037_Metric_REBRAND.indd 37 10/30/15 3:18 PM
D38
LViWID M 16 T i Ci l D038 D039 M i REBRAND O b 15 2015 10 20 AM
widia.com
Coatings provide high-speed
capability and are engineered
for fi nishing to light roughing.
Grade
Grades and Grade Descriptions
PSteel
MStainless Steel
KCast Iron
NNon-Ferrous
SHigh-Temp Alloys
HHardened Materials
Small Hole Boring Inserts
wear
resistance toughness
Coating Grade Description 05 10 15 20 25 30 35 40 45
CM1
Uncoated carbide. A very tough, ultra- ne grain unalloyed substrate. For
general-purpose machining of most steels, stainless steels, high-temperature alloys,
titanium, irons, and non-ferrous materials. Performs best at low speeds
and will handle interruptions and high feed rates. Use when C2, C3, or C25
fail due to chipping or breaking.
P
M
K
N
S
HW-S25
C2
Uncoated carbide. A hard, low binder content, unalloyed WC/Co ne-grained grade.
General-purpose grade for non-ferrous materials. Has excellent abrasion resistance
for machining cast irons, austenitic stainless steels, non-ferrous metals, non-metals,
and most high-temperature alloys.
M
K
N
S
HW-N15
C3 and C25
Uncoated carbide. Has excellent abrasion resistance for machining cast
irons, aluminium, and non-ferrous metals. Good wear resistance with some
toughness. Harder than C2, resulting in greater edge wear resistance. Suitable
for nishing operations.
M
K
N
S
HW-K15
TN7
A highly wear-resistant (TiC/TiN-based) cermet grade. High edge strength and
wear-resistant cermet offers improved tool life over uncoated/coated carbides
and resists material build-up on cutting edge. Finishing to semi- nishing of carbon,
alloy, and stainless steels at medium to high speeds. Can also be used
on non-ferrous materials.
P
K
HT-P15
ALO
Coated carbide. CVD — TiCN-TiC-Al2O3. A thin alumina coating over a hard,
deformation-resistant substrate. High-speed nishing of grey cast irons and
medium-speed nishing of alloy steels that are in a hardness range of 35–50 HRC.
Can withstand light interruptions. Alumina coating enables higher cutting speeds.
P
M
K
HC-K15
WID_Master16_Turning_Circle_D038_D039_Metric_REBRAND.indd 38 10/30/15 3:18 PM
D39
LViWID M 16 T i Ci l D038 D039 M i REBRANDO b 15 201510 20AM
widia.com
Coatings provide high-speed
capability and are engineered
for fi nishing to light roughing.
Grade
Grades and Grade Descriptions
PSteel
MStainless Steel
KCast Iron
NNon-Ferrous
SHigh-Temp Alloys
HHardened Materials
Small Hole Boring Inserts
wear
resistance toughness
Coating Grade Description 05 10 15 20 25 30 35 40 45
CG6
Coated carbide. CVD — TiC-TiCN-TiN. Tri-phase coating on a hard, low binder
content, ne-grained grade. High-speed, general-purpose grade for all kinds of steel.
Gold in colour.
P
M
K
HC-P10
CG5
A PVD-TiN-coated grade. Straight 9.5% Co substrate. Submicron grain. For
general-purpose machining of most steels, stainless steels, high-temperature alloys,
titanium, irons, and non-ferrous materials. Performs best at low speeds
and will handle interruptions and high feed rates.
P
M
K
N
S
HC-S25
CG55
A PVD-TiN coating over a very wear-resistant, unalloyed carbide substrate. For
general-purpose machining of most steels, stainless steels, high-temperature alloys,
titanium, irons, and non-ferrous materials. Grade provides combination of high
edge strength and wear resistance. Coating increases wear resistance and reduces
problems with built-up edge. The substrate offers superior thermal deformation
resistance and depth-of-cut notch resistance.
P
M
K
S
HC-M20
CBN6
PcBN tip brazed onto a carbide insert. Recommended for machining hardened steel
(45–65 HRC). Use on bearing steel, hot and cold work tool steels, high-speed steels,
die steels, case-hardened steels, carburised and nitrided irons, and some hard
coatings. Can be run both dry and wet.
BN-H25 H
CPD1
Polycrystalline diamond (PCD) compact grade provides exceptional hardness and
abrasion resistance. CPD1 is a superior nish boring grade that will signi cantly
improve workpiece tolerances, surface nishes, and insert tool life in high-silicon
aluminium, copper, aluminium carbon graphite, hard rubber, plastics, and/or wood. N
DP-N10
WID_Master16_Turning_Circle_D038_D039_Metric_REBRAND.indd 39 10/30/15 3:18 PM
D40
LViWID M 16 T i Ci l D040 D041 M i REBRAND O b 15 2015 10 20 AM
widia.com
Speed and Feed Chart
Positive Inserts • Metric
NOTE: Speed and feed rates and depth of cut may vary depending on materials and machining conditions including, but not
limited to, tool overhang, tool size, and finished surface requirements.
Cutting Speed — vc
m/min
C2 C25 C3 CG5 CG55 CG6
Material
Group min Start max min Start max min Start max min Start max min Start max min Start max
P
ap [mm] ––––––––– 0,051 –0,300 0,051 –0,300 0,051 –0,300
f [mm/rev] ––––––––– 0,025 –0,300 0,025 –0,300 0,025 –0,300
0/1 –––––––––95115 140 105 130 155 125 155 190
2–––––––––6075 90 65 85 100 80 100 125
3–––––––––6075 90 65 85 100 80 100 125
4–––––––––4560 70 50 65 80 65 80 95
5–––––––––6075 90 65 85 100 80 100 125
6–––––––––4050 60 45 55 70 55 65 80
M
ap [mm] 0,051 –0,300 0,051 –0,300 0,051 –0,300 0,051 –0,300 0,051 –0,300 0,051 –0,300
f [mm/rev] 0,025 –0,300 0,025 –0,300 0,025 –0,300 0,025 –0,300 0,025 –0,300 0,025 –0,300
155 70 80 60 80 95 60 80 95 75 90 110 80 100 120 95 115 140
250 60 75 55 70 85 55 70 85 65 80 100 75 90 110 85 105 125
335 45 55 45 50 65 45 50 65 50 60 75 55 65 80 60 80 95
K
ap [mm] 0,051 –0,300 0,051 –0,300 0,051 –0,300 0,051 –0,300 0,051 –0,300 0,051 –0,300
f [mm/rev] 0,025 –0,300 0,025 –0,300 0,025 –0,300 0,025 –0,300 0,025 –0,300 0,025 –0,300
150 65 80 60 70 85 60 70 85 60 75 90 65 80 100 75 90 110
265 80 100 75 90 110 75 90 110 75 95 115 85 105 125 95 115 140
350 60 75 55 65 80 55 65 80 55 70 80 60 75 90 65 85 100
N
ap [mm] 0,051 –0,300 0,051 –0,300 0,051 –0,300 0,051 –0,300 0,051 –0,300 – ––
f [mm/rev] 0,025 –0,300 0,025 –0,300 0,025 –0,300 0,025 –0,300 0,025 –0,300 – ––
1400 505 605 400 505 605 400 505 605 400 505 605 445 555 665 – ––
2295 370 440 295 370 445 295 370 445 295 370 445 325 405 490 – ––
370 85 105 70 85 105 70 85 105 85 105 125 90 115 135 – ––
4310 380 465 310 385 465 310 385 465 140 175 210 155 190 230 – – –
5145 185 220 145 185 220 145 185 220 175 220 265 195 240 290 – ––
6140 175 210 140 175 210 140 175 210 170 210 255 185 235 280 – ––
7240 295 355 240 300 360 240 300 360 245 305 365 265 335 400 – ––
S
ap [mm] 0,025 –0,200 0,025 –0,200 0,025 –0,200 0,025 –0,200 0,025 –0,200 – ––
f [mm/rev] 0,025 –0,127 0,025 –0,127 0,025 –0,127 0,025 –0,127 0,025 –0,127 – ––
130 35 45 30 35 45 30 35 45 30 35 45 35 40 50 – ––
225 30 35 25 30 35 25 30 35 25 30 35 25 35 40 – ––
325 30 35 25 30 35 25 30 35 30 40 50 35 45 55 – ––
425 30 35 25 30 35 25 30 35 – ––––––––
H
ap [mm] ––––––––––––––––––
f [mm/rev] ––––––––––––––––––
1––––––––––––––––––
2––––––––––––––––––
3––––––––––––––––––
4––––––––––––––––––
WID_Master16_Turning_Circle_D040_D041_Metric_REBRAND.indd 40 10/30/15 3:18 PM
D41
LViWID M 16 T i Ci l D040 D041 M i REBRANDO b 15 201510 20AM
widia.com
Speed and Feed Chart
Positive Inserts • Metric
NOTE: Speed and feed rates and depth of cut may vary depending on materials and machining conditions including, but not
limited to, tool overhang, tool size, and finished surface requirements.
Cutting Speed — vc
m/min
Material
Group
CM1 ALO TN7 CBN6 CPD1
min Start max min Start max min Start max min Start max min Start max
P
ap [mm] 0,051 –0,300 0,051 –0,300 0,051 –0,300 – –––––
f [mm/rev] 0,025 –0,300 0,025 –0,300 0,025 –0,300 – –––––
0/1 55 65 80 165 205 245 200 245 295 – –––––
235 45 55 105 135 160 130 160 190 – –––––
335 45 55 105 135 160 130 160 190 – –––––
425 35 40 85 105 125 100 125 150 – –––––
535 45 55 105 135 160 130 160 190 – –––––
625 30 35 70 90 105 85 105 130 – –––––
M
ap [mm] 0,051 –0,300 0,051 –0,300 0,051 –0,300 – –––––
f [mm/rev] 0,025 –0,300 0,025 –0,300 0,025 –0,300 – –––––
155 65 80 105 130 160 105 130 155 – –––––
250 60 75 95 120 145 95 115 140 – –––––
335 45 55 70 90 110 70 85 105 – –––––
K
ap [mm] 0,051 –0,300 0,051 –0,300 0,051 –0,300 – –––––
f [mm/rev] 0,025 –0,300 0,025 –0,300 0,025 –0,300 – –––––
145 60 70 125 155 185 80 105 125 – –––––
260 75 90 160 200 240 105 130 160 – –––––
345 55 65 115 145 170 80 95 115 – –––––
N
ap [mm] 0,051 –0,300 – –– 0,051 –0,300 – –– 0,051 –0,300
f [mm/rev] 0,025 –0,300 – –– 0,025 –0,300 – –– 0,025 –0,300
1400 505 605 – –– 400 505 605 – –– 855 1065 1280
2295 370 445 – –– 295 370 445 – –– 650 810 975
370 85 105 – ––80100 120 – –– 365 455 550
4100 125 150 – –– 195 240 290 – –– 325 405 490
5145 185 220 – –– 195 245 295 – –– 340 425 510
6140 175 210 – –– 175 220 265 – –– 335 420 505
7240 295 360 – –– 240 300 365 – –– 525 660 790
S
ap [mm] 0,025 –0,200 – ––––– 0,025 –0,200 – ––
f [mm/rev] 0,025 –0,127 – ––––– 0,025 –0,127 – ––
125 30 40 – –––––90110 135 – ––
220 25 30 – –––––7085 105 – ––
325 35 40 – ––––– 100 120 145 – ––
4–––––––––––––––
H
ap [mm] ––––––––– 0,025 –0,200 – ––
f [mm/rev] ––––––––– 0,025 –0,127 – ––
1––––––––– 110 135 165 – ––
2––––––––– 105 130 155 – ––
3––––––––– 100 120 145 – ––
4–––––––––90110 135 – ––
WID_Master16_Turning_Circle_D040_D041_Metric_REBRAND.indd 41 10/30/15 3:18 PM
D42
LViWID M 16 T i Ci l D042 D043 M i REBRAND O b 15 2015 10 20 AM
widia.com
Small Hole Boring Positive Inserts
P
M
K
N
S
H
CDHB
ISO
catalogue number D L10 S R¡D1 max
C2
C25
C3
CG5
CG55
CG6
CM1
ALO
TN7
CBN6
CPD1
CDHBS4T0X0 3,97 4,03 1,02 0,05 2,13 —
–
2830897
–
3884731
–
2830888
2830881
–
–
–
–
CDHBS4T0X0M 3,97 4,03 1,02 0,05 2,13 1,90
–
–
–
–
–
–
–
–
–
2830746
–
CDHBS4T002 3,97 4,03 1,02 0,18 2,13 —
–
2830864
–
3884732
–
2830853
2830848
2830870
2830843
–
–
CDHBS4T002M 3,97 4,03 1,02 0,18 2,13 0,96
–
–
–
–
–
–
–
–
–
2830741
2830774
CDHBS4T004M 3,97 4,03 1,02 0,38 2,13 0,96
–
–
–
–
–
–
–
–
–
–
2830769
CDHBS4T004 3,97 4,03 1,02 0,38 2,13 —
–
2830830
–
2830788
–
2830817
2830813
–
2830803
–
–
Tools for Small Hole Boring
NOTE: Max DOC only applies to tipped inserts, which are designated with an “M” at the end of the catalogue number.
rst choice
alternate choice
(M)
WID_Master16_Turning_Circle_D042_D043_Metric_REBRAND.indd 42 10/30/15 3:18 PM
D43
LViWID M 16 T i Ci l D042 D043 M i REBRANDO b 15 201510 20AM
widia.com
Small Hole Boring Positive Inserts
CDHH-R/L
ISO
catalogue number D L10 S R¡D1
C2
C25
C3
CG5
CG55
CG6
CM1
ALO
TN7
CBN6
CPD1
right hand
CDHHS4T002R 3,97 4,03 1,02 0,18 2,13
–
–
–
2830731
–
–
2830706
–
–
–
–
CDHHS4T004R 3,97 4,03 1,02 0,38 2,13
–
–
–
2830682
–
–
–
–
–
–
–
left hand
CDHHS4T002L 3,97 4,03 1,02 0,18 2,13
–
–
–
2830724
–
2830712
2830700
–
–
–
–
CDHHS4T004L 3,97 4,03 1,02 0,38 2,13
–
–
–
2830678
–
–
–
–
–
–
–
NOTE: Right-hand inserts used in left-hand bars only.
rst choice
alternate choice
Tools for Small Hole Boring
P
M
K
N
S
H
WID_Master16_Turning_Circle_D042_D043_Metric_REBRAND.indd 43 10/30/15 3:18 PM
D44
LViWID M 16 T i Ci l D044 D045 M i REBRAND N b 11 2015 7 43 AM
widia.com
Small Hole Boring Positive Inserts
P
M
K
N
S
H
CDHH
ISO
catalogue number D L10 S R¡D1
C2
C25
C3
CG5
CG55
CG6
CM1
ALO
TN7
CBN6
CPD1
CDHHS4T002 3,97 4,03 1,02 0,18 2,13
–
–
–
2830632
–
–
2830638
–
–
–
–
CDHHS4T002L 3,97 4,03 1,02 0,18 2,13
–
–
–
2830724
–
2830712
2830700
–
–
–
–
CDHHS4T002R 3,97 4,03 1,02 0,18 2,13
–
–
–
2830731
–
–
2830706
–
–
–
–
CDHHS4T004L 3,97 4,03 1,02 0,38 2,13
–
–
–
2830678
–
–
–
–
–
–
–
CDHHS4T004R 3,97 4,03 1,02 0,38 2,13
–
–
–
2830682
–
–
–
–
–
–
–
CDHHS4T004 3,97 4,10 1,02 0,38 2,13
–
–
–
2830619
–
–
–
–
–
–
–
Tools for Small Hole Boring
rst choice
alternate choice
CPHB
ISO
catalogue number D L10 S R¡D1
C2
C25
C3
CG5
CG55
CG6
CM1
ALO
TN7
CBN6
CPD1
CPHB06T102 6,35 6,45 1,91 0,18 2,80
–
–
–
2824583
–
–
–
–
–
–
–
CPHB06T104 6,35 6,45 1,91 0,38 2,80
–
–
–
2824562
–
–
–
–
–
–
–
WID_Master16_Turning_Circle_D044_D045_Metric_REBRAND.indd 44 11/11/15 9:24 AM
D45
LViWID M 16 T i Ci l D044 D045 M i REBRANDN b 11 20157 43AM
widia.com
Small Hole Boring Positive Inserts
P
M
K
N
S
H
CPHH
ISO
catalogue number D L10 S R¡D1
C2
C25
C3
CG5
CG55
CG6
CM1
ALO
TN7
CBN6
CPD1
CPHH06T102 6,35 6,45 1,91 0,18 2,79
–
–
–
2824461
–
2824454
2824468
–
–
–
–
CPHH06T104 6,35 6,45 1,91 0,38 2,80
–
–
–
2824441
–
–
–
–
–
–
–
Tools for Small Hole Boring
rst choice
alternate choice
CPMT-LF
ISO
catalogue number D L10 S R¡D1
C2
C25
C3
CG5
CG55
CG6
CM1
ALO
TN7
CBN6
CPD1
CPMT09T302LF 9,53 9,67 3,97 0,20 4,40
–
–
–
2821519
–
–
–
–
–
–
–
CPMT09T304LF 9,53 9,67 3,97 0,40 4,40
–
–
–
2821499
–
–
–
–
–
–
–
CPMT09T308LF 9,52 9,67 3,97 0,79 4,40
–
–
–
2821484
–
–
–
–
–
–
–
WID_Master16_Turning_Circle_D044_D045_Metric_REBRAND.indd 45 11/11/15 9:24 AM
D46
LViWID M 16 T i Ci l D046 D047 M i REBRAND O b 15 2015 10 21 AM
widia.com
Small Hole Boring Positive Inserts
P
M
K
N
S
H
GCHW
ISO
catalogue number D L10 S R¡D1
C2
C25
C3
CG5
CG55
CG6
CM1
ALO
TN7
CBN6
CPD1
GCHW060202 4,76 6,73 2,36 0,18 2,39
–
–
–
2827596
–
–
2827601
–
–
–
–
GCHW060204 4,76 6,73 2,36 0,38 2,39
–
–
–
2827577
–
–
2827584
–
–
–
–
Tools for Small Hole Boring
rst choice
alternate choice
GCHT
ISO
catalogue number D L10 S R¡D1
C2
C25
C3
CG5
CG55
CG6
CM1
ALO
TN7
CBN6
CPD1
GCHT060202 4,83 6,83 2,36 0,18 2,39
–
–
–
2827537
–
–
–
–
–
–
–
GCHT060204 4,76 6,83 2,36 0,38 2,39
–
–
–
2827525
–
–
2827531
–
–
–
–
GPHW
ISO
catalogue number D L10 S R¡D1
C2
C25
C3
CG5
CG55
CG6
CM1
ALO
TN7
CBN6
CPD1
GPHW050102 3,97 5,61 1,59 0,18 2,13
–
–
–
2827631
–
2827625
2827637
–
–
–
–
GPHW050104 3,97 5,61 1,59 0,38 2,13
–
–
–
2827615
–
2827608
2827621
–
–
–
–
WID_Master16_Turning_Circle_D046_D047_Metric_REBRAND.indd 46 10/30/15 3:19 PM
D47
LViWID M 16 T i Ci l D046 D047 M i REBRANDO b 15 201510 21AM
widia.com
Small Hole Boring Positive Inserts
P
M
K
N
S
H
GPHT
ISO
catalogue number D L10 S R¡D1
C2
C25
C3
CG5
CG55
CG6
CM1
ALO
TN7
CBN6
CPD1
GPHT050102 3,97 5,76 1,57 0,18 2,13
–
–
–
2827560
–
–
2827566
–
–
–
–
GPHT050104 4,08 5,76 1,57 0,38 2,13
–
–
–
2827548
–
–
2827554
–
–
–
–
Tools for Small Hole Boring
rst choice
alternate choice
TBHB
ISO
catalogue number D L10 S R¡D1
C2
C25
C3
CG5
CG55
CG6
CM1
ALO
TN7
CBN6
CPD1
TBHB07S1X0 4,06 7,04 1,19 0,05 2,39
–
–
–
2828556
–
–
–
–
–
–
–
TBHB110201 6,35 11,00 2,38 0,10 3,33
–
–
–
2824266
–
–
–
–
–
–
–
WID_Master16_Turning_Circle_D046_D047_Metric_REBRAND.indd 47 10/30/15 3:19 PM
D48
LViWID M 16 T i Ci l D048 D049 M i REBRAND O b 15 2015 10 21 AM
widia.com
Small Hole Boring Positive Inserts
P
M
K
N
S
H
TDHB
Tools for Small Hole Boring
NOTE: Max DOC only applies to tipped inserts, which are designated with an “M” at the end of the catalogue number.
rst choice
alternate choice
(M)
ISO
catalogue number D L10 S R¡D1 max
C2
C25
C3
CG5
CG55
CG6
CM1
ALO
TN7
CBN6
CPD1
TDHB07S1X0M 4,06 7,04 1,19 0,05 2,39 1,27
–
–
–
–
–
–
–
–
–
–
2828622
TDHB07S102M 4,06 7,04 1,19 0,18 2,39 1,27
–
–
–
–
–
–
–
–
–
2828579
–
TDHB07S104M 4,06 7,04 1,19 0,38 2,39 1,27
–
–
–
–
–
–
–
–
–
2828634
–
TDHB07S1X0 4,06 7,04 1,19 0,05 2,41 —
–
2828784
–
2828796
–
–
2828778
–
–
–
–
TDHB07S102 4,06 7,04 1,19 0,18 2,41 —
–
2828732
–
2828755
–
2828749
2828727
2828763
2828720
–
–
TDHB07S104 4,06 7,04 1,19 0,38 2,41 —
–
2828697
–
2828708
–
2828702
2828693
–
2828688
–
–
TDHB07S108 4,06 7,04 1,19 0,79 2,41 —
–
–
–
2828682
–
–
–
–
–
–
–
WID_Master16_Turning_Circle_D048_D049_Metric_REBRAND.indd 48 10/30/15 3:19 PM
D49
LViWID M 16 T i Ci l D048 D049 M i REBRANDO b 15 201510 21AM
widia.com
Small Hole Boring Positive Inserts
TDHH-R/L
ISO
catalogue number D L10 S R¡D1
C2
C25
C3
CG5
CG55
CG6
CM1
ALO
TN7
CBN6
CPD1
right hand
TDHH07S102R 4,06 7,04 1,19 0,18 2,41
–
–
–
2828547
–
–
–
–
–
–
–
TDHH07S104R 4,06 7,04 1,19 0,38 2,41
–
–
–
2828499
–
–
–
–
–
–
–
left hand
TDHH07S102L 4,06 7,04 1,19 0,18 2,41
–
–
–
2828541
–
2828529
2828516
–
2828508
–
–
TDHH07S104L 4,06 7,04 1,19 0,38 2,41
–
–
–
2828494
–
–
2828472
–
2828460
–
–
NOTE: Right-hand inserts used in left-hand bars only.
Tools for Small Hole Boring
rst choice
alternate choice
TDHH
ISO
catalogue number D L10 S R¡D1 max
C2
C25
C3
CG5
CG55
CG6
CM1
ALO
TN7
CBN6
CPD1
TDHH07S102 4,06 7,04 1,19 0,18 2,41 —
–
–
–
2828398
–
–
–
–
–
–
–
TDHH07S102L 4,06 7,04 1,19 0,18 2,41 4,52
–
–
–
2828541
–
2828529
2828516
–
2828508
–
–
TDHH07S102R 4,06 7,04 1,19 0,18 2,41 4,52
–
–
–
2828547
–
–
–
–
–
–
–
TDHH07S104L 4,06 7,04 1,19 0,38 2,41 4,36
–
–
–
2828494
–
–
2828472
–
2828460
–
–
TDHH07S104R 4,06 7,04 1,19 0,38 2,41 4,36
–
–
–
2828499
–
–
–
–
–
–
–
TDHH07S104 4,06 7,18 1,19 0,38 2,41 —
–
–
–
2828386
–
–
–
–
–
–
–
P
M
K
N
S
H
NOTE: Max DOC only applies to tipped inserts, which are designated with an “M” at the end of the catalogue number.
WID_Master16_Turning_Circle_D048_D049_Metric_REBRAND.indd 49 10/30/15 3:19 PM
D50
LViWID M 16 T i Ci l D050 D051 M i REBRAND O b 15 2015 10 21 AM
widia.com
Small Hole Boring Positive Inserts
P
M
K
N
S
H
TPHB
ISO
catalogue number D L10 S R¡D1 max
C2
C25
C3
CG5
CG55
CG6
CM1
ALO
TN7
CBN6
CPD1
TPHB1102X0 6,35 11,00 2,38 0,05 3,30 —
–
–
2824236
2824251
–
–
2824220
–
–
–
–
TPHB1102X0M 6,35 11,00 2,38 0,05 3,30 1,62
–
–
–
–
–
–
–
–
–
2823954
–
TPHB110202 6,35 11,00 2,38 0,18 3,30 —
–
–
2824191
2824200
–
2824195
2824168
–
2824148
–
–
TPHB110202M 6,35 11,00 2,38 0,18 3,30 1,62
–
–
–
–
–
–
–
–
–
2823949
2824022
TPHB110204 6,35 11,00 2,38 0,38 3,30 —
–
–
2824122
2824136
–
2824129
2824104
–
2824090
–
–
TPHB110204M 6,35 11,00 2,38 0,40 3,30 1,62
–
–
–
–
–
–
–
–
–
2823942
2824015
TPHB110208 6,35 11,00 2,38 0,79 3,30 —
–
–
–
2824077
–
–
2824044
–
2824037
–
–
TPHB1603X0 9,53 16,50 3,18 0,05 3,30 —
–
–
–
2821402
–
–
2821844
–
–
–
–
TPHB160302 9,53 16,50 3,18 0,18 3,30 —
2821834
–
–
2821397
–
–
2821816
–
–
–
–
TPHB160304 9,53 16,50 3,18 0,38 3,30 —
2821799
–
–
2821392
–
2821778
2821772
–
2821749
–
–
TPHB160308 9,53 16,50 3,18 0,79 3,30 —
2821371
–
–
2821381
–
2821377
2821349
–
2821331
–
–
TPCB160302 9,53 — 3,23 0,18 3,30 —
–
–
–
–
–
2821822
–
–
–
–
–
Tools for Small Hole Boring
NOTE: Max DOC only applies to tipped inserts, which are designated with an “M” at the end of the catalogue number.
rst choice
alternate choice
(M)
WID_Master16_Turning_Circle_D050_D051_Metric_REBRAND.indd 50 10/30/15 3:19 PM
D51
LViWID M 16 T i Ci l D050 D051 M i REBRANDO b 15 201510 21AM
widia.com
Small Hole Boring Positive Inserts
TPHH-R/L
ISO
catalogue number D L10 S R¡D1
C2
C25
C3
CG5
CG55
CG6
CM1
ALO
TN7
CBN6
CPD1
right hand
TPHH110202R 6,35 11,00 2,38 0,18 3,33
–
–
–
2823812
–
–
–
–
–
–
–
TPHH160302R 9,53 16,50 3,18 0,18 3,33
–
–
–
2821213
–
–
–
–
–
–
–
TPHH160304R 9,53 16,50 3,18 0,38 3,33
–
–
–
2821168
–
–
–
–
–
–
–
TPHH160308R 9,53 16,50 3,18 0,79 3,33
–
–
–
2821121
–
–
–
–
–
–
–
left hand
TPHH110202L 6,35 11,00 2,38 0,18 3,33
–
–
–
2823805
–
–
–
–
2823767
–
–
TPHH110204L 6,35 11,00 2,38 0,38 3,33
–
–
–
2823753
–
2823739
–
–
–
–
–
TPHH160302L 9,53 16,50 3,18 0,18 3,33
–
–
–
2821208
–
–
–
–
–
–
–
TPHH160304L 9,53 16,50 3,18 0,38 3,33
–
–
–
2821162
–
2821150
–
–
–
–
–
TPHH160308L 9,53 16,50 3,18 0,79 3,33
–
–
–
2821115
–
–
–
–
–
–
–
rst choice
alternate choice
NOTE: Right-hand inserts used in left-hand bars only.
Tools for Small Hole Boring
P
M
K
N
S
H
WID_Master16_Turning_Circle_D050_D051_Metric_REBRAND.indd 51 10/30/15 3:19 PM
D52
LViWID M 16 T i Ci l D052 D053 M i REBRAND O b 15 2015 10 21 AM
widia.com
Small Hole Boring Positive Inserts
P
M
K
N
S
H
TPHH
ISO
catalogue number D L10 S R¡D1
C2
C25
C3
CG5
CG55
CG6
CM1
ALO
TN7
CBN6
CPD1
TPHH110202 6,35 11,00 2,38 0,18 3,30
–
–
–
2823914
–
2823908
–
–
–
–
–
TPHH110204 6,35 11,00 2,38 0,38 3,30
–
–
–
2823858
–
–
–
–
–
–
–
TPCH110204 6,50 11,26 2,38 0,38 3,30
–
–
–
–
–
2823851
–
–
–
–
–
Tools for Small Hole Boring
rst choice
alternate choice
TPHH-LF
ISO
catalogue number D L10 S R¡D1
C2
C25
C3
CG5
CG55
CG6
CM1
ALO
TN7
CBN6
CPD1
TPHH160304 9,53 16,50 3,18 0,40 3,33
–
–
–
2821070
–
2821705
–
–
–
–
–
TPHH160304LF 9,53 16,50 3,18 0,40 3,33
–
2821718
–
–
–
–
–
–
–
–
–
TPHH160308 9,53 16,50 3,18 0,79 3,33
–
–
–
–
–
2821670
–
2821688
–
–
–
TPHH160308 9,53 16,50 3,18 0,79 3,33
–
–
–
2821067
–
–
–
–
–
–
–
TPHH17T309LF 9,80 16,98 3,97 0,94 3,33
–
–
–
2821319
–
–
–
–
–
–
–
WID_Master16_Turning_Circle_D052_D053_Metric_REBRAND.indd 52 10/30/15 3:19 PM
D53
LViWID M 16 T i Ci l D052 D053 M i REBRANDO b 15 201510 21AM
widia.com
Small Hole Boring Positive Inserts
P
M
K
N
S
H
TPGT-HP
ISO
catalogue number D L10 S R¡D1
C2
C25
C3
CG5
CG55
CG6
CM1
ALO
TN7
CBN6
CPD1
TPGT110202HP 6,35 11,00 2,38 0,20 2,90
–
–
–
2823605
–
–
–
–
–
–
–
TPGT110204HP 6,35 11,00 2,38 0,40 2,90
–
–
–
2823592
–
–
2823595
–
–
–
–
TPGT16T304HP 9,53 16,50 3,97 0,40 4,40
–
–
–
2821536
–
–
–
–
–
–
–
Tools for Small Hole Boring
rst choice
alternate choice
TPMT-LF
ISO
catalogue number D L10 S R¡D1
C2
C25
C3
CG5
CG55
CG6
CM1
ALO
TN7
CBN6
CPD1
TPMT110202LF 6,35 11,00 2,38 0,20 2,80
–
–
–
2823646
–
–
–
–
–
–
–
TPMT110204LF 6,35 11,00 2,38 0,40 2,80
–
–
–
2823625
–
2823619
–
–
–
–
–
TPMT160304LF 9,53 16,50 3,18 0,40 4,40
–
–
–
2821577
–
2821571
–
–
–
–
–
TPMT160308LF 9,53 16,50 3,18 0,79 4,40
–
–
–
2821566
–
–
–
–
–
–
–
WID_Master16_Turning_Circle_D052_D053_Metric_REBRAND.indd 53 10/30/15 3:19 PM
D54
LViWID M 16 T i Ci l D054 D055 M i REBRAND O b 15 2015 10 21 AM
widia.com
Small Hole Boring Positive Inserts
P
M
K
N
S
H
WPHT
ISO
catalogue number D L10 S R¡D1
C2
C25
C3
CG5
CG55
CG6
CM1
ALO
TN7
CBN6
CPD1
WPHTS30101 4,76 3,26 1,59 0,10 2,16
–
–
–
2827496
–
–
–
–
–
–
–
WPHTS30102 4,76 3,26 1,59 0,20 2,16
–
–
–
2827483
–
–
2827490
–
–
–
–
WPHTS30104 4,76 3,26 1,59 0,40 2,16
–
–
–
2827471
–
–
2827477
–
–
–
–
WPGT040202UF 6,35 4,34 2,38 0,20 2,79
–
–
–
2824331
–
–
–
–
–
–
–
WPHT040201 6,35 4,34 2,38 0,10 2,80
–
–
–
2824344
–
–
–
–
–
–
–
WPHT040204 6,35 4,34 2,38 0,40 2,80
–
–
–
2824316
–
–
–
–
–
–
–
Tools for Small Hole Boring
80˚
rst choice
alternate choice
WPMT-LF
ISO
catalogue number D L10 S R¡D1
C2
C25
C3
CG5
CG55
CG6
CM1
ALO
TN7
CBN6
CPD1
WPMTS3T104LF 4,76 3,25 1,98 0,40 2,15
–
–
–
–
2827521
–
–
–
–
–
–
WPMT040204LF 6,35 4,34 2,38 0,40 2,90
–
–
–
–
2824362
–
–
–
–
–
–
WPMT06T304LF 9,53 6,52 3,97 0,40 4,40
–
–
–
–
2821036
–
–
–
–
–
–
WPMT06T308LF 9,53 6,52 3,97 0,80 4,40
–
–
–
–
2821023
–
–
–
–
–
–
80˚
WID_Master16_Turning_Circle_D054_D055_Metric_REBRAND.indd 54 10/30/15 3:19 PM
D55
LViWID M 16 T i Ci l D054 D055 M i REBRANDO b 15 201510 21AM
widia.com
Small Hole Boring Positive Inserts
CDG-R/L
ISO
catalogue number D S T W D1
C2
C25
C3
CG5
CG55
CG6
CM1
ALO
TN7
CBN6
CPD1
right hand
CDG50252R 3,97 1,27 1,02 0,64 2,13
–
–
–
2830541
–
–
–
–
–
–
–
CDG50302R 3,97 1,27 1,02 0,76 2,13
–
–
–
2830529
–
–
2830535
–
–
–
–
Tools for Small Hole Boring
Detail of 0,38mm (.015") insert.
rst choice
alternate choice
CPG-R/L
ISO
catalogue number D S T W D1
C2
C25
C3
CG5
CG55
CG6
CM1
ALO
TN7
CBN6
CPD1
right hand
CPG2032R 6,35 1,91 1,65 0,76 2,79
–
–
–
2824546
–
–
–
–
–
–
–
CPG2062R 6,35 1,91 1,65 1,52 2,79
–
–
–
2824531
–
–
–
–
–
–
–
Detail of 0,38mm (.015") insert.
P
M
K
N
S
H
WID_Master16_Turning_Circle_D054_D055_Metric_REBRAND.indd 55 10/30/15 3:19 PM
D56
LViWID M 16 T i Ci l D056 D057 M i REBRAND O b 15 2015 10 22 AM
widia.com
Small Hole Boring Positive Inserts
FNR-R/L
ISO
catalogue number D S T W RC D1
C2
C25
C3
CG5
CG55
CG6
CM1
ALO
TN7
CBN6
CPD1
right hand
FNR150472R 5,00 1,85 1,00 1,20 0,60 2,50
–
–
–
2820783
–
–
–
–
–
–
–
Tools for Small Hole Boring
rst choice
alternate choice
CDT-R/L
ISO
catalogue number D S T RC D1 TPI min TPI max TP min TP max
C2
C25
C3
CG5
CG55
CG6
CM1
ALO
TN7
CBN6
CPD1
right hand
CDT50022R 3,97 1,27 0,76 0,05 2,11 24 48 0,5 1,0
–
–
–
2830567
–
–
–
–
–
–
–
CPT-R/L
ISO
catalogue number D S T RC D1 TPI min TPI max TP min TP max
C2
C25
C3
CG5
CG55
CG6
CM1
ALO
TN7
CBN6
CPD1
right hand
CPT20052R 6,35 1,91 1,65 0,13 2,79 10 24 1,0 2,5
–
–
–
2824516
–
–
2824523
–
–
–
–
P
M
K
N
S
H
WID_Master16_Turning_Circle_D056_D057_Metric_REBRAND.indd 56 10/30/15 3:19 PM
D57
LViWID M 16 T i Ci l D056 D057 M i REBRANDO b 15 201510 22AM
widia.com
Small Hole Boring Positive Inserts
FNT-ACME-R/L
ISO
catalogue number D S T E D1 TPI min
C2
C25
C3
CG5
CG55
CG6
CM1
ALO
TN7
CBN6
CPD1
right hand
FNT1512ACME2R 5,00 2,35 1,26 1,05 2,50 12
–
–
–
2820829
–
–
–
–
–
–
–
Tools for Small Hole Boring
rst choice
alternate choice
FNT-UN-R/L
ISO
catalogue number D S T E D1 TPI min
C2
C25
C3
CG5
CG55
CG6
CM1
ALO
TN7
CBN6
CPD1
right hand
FNT1528UN2R 5,00 1,85 0,61 0,65 2,50 28
–
–
–
2820865
–
–
–
–
–
–
–
P
M
K
N
S
H
WID_Master16_Turning_Circle_D056_D057_Metric_REBRAND.indd 57 10/30/15 3:19 PM
D58 widia.com
Small Hole Boring Insert Cross Reference Chart
WIDIA-CIRCLE
™
catalogue number
New ISO
catalogue number
CDCD CDHB
CDCG CDHH
CDCT CDHH
CPCA CPHB
CPCM CPHH
GCCD GCHW
GCCT GCHT
GPCD GPHW
GPCT GPHT
TD6P TPHB
TDAB TDHB
TDAT TDHH
TDCG TDHH
TPCB TPHB
TPCG TPHH
TPCH TPHH
TPGH TPHH
TPMT TPMT
WPGT WPHT
WID_Master16_Turning_Circle_D058_D059_Metric_REBRAND.indd 58 11/11/15 5:32 PM
D59
widia.com
PP 100021958, 100014483, 100021940, 100021916
Small Hole Boring
Hardware
Insert Screws
order number
ISO
catalogue number Torx/hex
internal
thread
2840098 MSM46 2 mm M4X0.7
2840186 AS832/AS-8-32 5/64 #8-32
2892513 BS832 5/64 —
2820981 LTM16 T5 M2X0.4
2832647 CC11 T6 #1-72
2832635 CT11 T6 #1-72
2830477 FC11 T7 —
2828337 GT21 T7 #2-56
2825941 QTM20 T7 M2.5X0.45
2825948 QTM26 T7 M2.5X0.45
2826005 QC15 T8 #3-48
2826038 QC21 T9 #4-40
2823227 SC30 T10 #4-40
2823203 STM31 T15 M3.5 X 0.6
2832641 CT15 T16 #1-72
Wrenches
order number
ISO
catalogue number Torx/hex
2840094 MKEY 2.0 mm
2840174 AKEY 5/64
2828318 GTKEY T5
2832628 CKEY T6
2830492 FKEY T7
2825973 Q8KEY T8
2825982 QKEY T9
2823182 SKEY T10
Drive Bits
order number
ISO
catalogue number Torx/hex
2840089 MBIT 2 mm
2832661 CBIT T6
2830497 FBIT T7
2825963 QTBIT T7
2825964 Q8BIT T8
2826045 QBIT T9
2823236 SBIT T10
2823196 STBIT T15
Wedges
order number
ISO
catalogue number
2840192 AW250/AW-250
2836024 BW312
WID_Master16_Turning_Circle_D058_D059_Metric_REBRAND.indd 59 11/11/15 5:32 PM
D60 widia.com
BB Type
Replaceable boring insert.
ABD Type
Replaceable boring insert available in coated and
uncoated carbide, CBN, and PCD tip. A series has
a coolant slot.
ABD Type
Replaceable boring insert with coolant slot.
Features
Benefi ts
• 1,56–3,96mm diameter boring range.
• Unique locking system enables quick,
accurate insert changes.
• Insert repeatability guaranteed within ±0,013mm.
• Quick, accurate insert setups.
• Available in multiple styles for machining a wide
range of materials.
• Elliptical, ground insert shanks for maximum
strength and rigidity.
A/B Series Micro Boring Bar
A/B Series
A/B Series Small Hole Tooling
Available in steel and carbide shanks, the WIDIA™ line of micro boring bars is an
excellent, economical choice for a wide range of applications — from creating small
holes in small parts to precision micro boring typically found in large workpieces —
manufactured in the aerospace, heavy equipment, and automotive industries.
WID_Master16_Turning_Circle_D060_D061_Metric_REBRAND.indd 60 11/11/15 5:33 PM
D61
widia.com
A/B Series Boring Bar Identifi cation System
Each character in our catalogue number signi es a speci c trait of that
product. Use the following key columns and corresponding images
to easily identify which attributes apply.
ATBM838
Small Hole Boring
Catalogue Numbering System
AT B M 8 38
Series Style and Bar Type
Construction Features
of the Boring Bar
Boring
Bar
Type Shank Diameter
shown as “D”
Length
shown as “L”
AT = Through Coolant M = Metric Metric Metric
8
= 8,00mm
38
= 38,0mm
BS = No Coolant
10
= 10,00mm
100
= 100,0mm
12
= 12,00mm
102
= 102,0mm
16
= 16,00mm
152
= 152,0mm
20
= 20,00mm
L
WID_Master16_Turning_Circle_D060_D061_Metric_REBRAND.indd 61 11/11/15 5:33 PM
D62
LViWID M 16 T i Ci l D062 D063 M i REBRAND N b 10 2015 1 53 PM
widia.com
A/B Series
Small Hole Toolholders
ATBM
NOTE: These tools will accept any A-Series solid carbide insert (ABD, ABD-M, AGD, APD, and ATD).
order number catalogue number D D2 L A wedge
wedge
screw hex
3896121 ATBM12100 12,00 19,30 102 6,35 AW250/AW-250 AS832/AS-8-32 5/64
2839192 ATBM1638 16,00 19,30 38 6,35 AW250/AW-250 AS832/AS-8-32 5/64
3896193 ATBM16100 16,00 19,30 102 6,35 AW250/AW-250 AS832/AS-8-32 5/64
3896194 ATBM20102 20,00 19,30 102 6,35 AW250/AW-250 AS832/AS-8-32 5/64
3896195 ATBM25102 25,00 19,30 102 6,35 AW250/AW-250 AS832/AS-8-32 5/64
Tools for Small Hole Boring
BSBM
NOTE: These tools will accept any B-Series solid carbide insert (BB and BP).
order number catalogue number D D2 L L1 wedge
wedge
screw hex
3896196 BSBM20152 20,00 25,65 152 29 BW312 BS832 5/64
WID_Master16_Turning_Circle_D062_D063_Metric_REBRAND.indd 62 11/11/15 9:24 AM
D63
LViWID M 16 T i Ci l D062 D063 M i REBRANDN b 10 20151 53PM
widia.com
A/B Series
Small Hole Boring Bars
ABC
order number catalogue number KRA D D min D2 F L4
gage
insert
insert
screw Torx
right hand
2836656 ABC1000R -7 3,96 4,57 4,16 2,41 25,40 CD..120605 CC09 T6
2836651 ABC1250R -7 3,96 4,57 4,16 2,41 31,75 CD..120605 CC09 T6
2836645 ABC1500R -7 3,96 4,57 4,16 2,41 38,10 CD..120605 CC09 T6
2836667 ABC500R -7 3,96 4,57 4,16 2,41 12,70 CD..120605 CC09 T6
2836660 ABC750R -7 3,96 4,57 4,16 2,41 19,05 CD..120605 CC09 T6
Tools for Small Hole Boring
WID_Master16_Turning_Circle_D062_D063_Metric_REBRAND.indd 63 11/11/15 9:24 AM
D64
LViWID M 16 T i Ci l D064 D065 M i REBRAND N b 10 2015 1 56 PM
widia.com
A/B Series Boring Bar Identifi cation System
Small Hole Boring
Catalogue Numbering System
ABD125375R
ABD 125 375 R
Insert Style Minimum Bore
shown as “D min”
Bore Depth, Groove Width,
Flat on Thread
shown as “L4, W”
Hand
of Tool
Tip Style
(optional)
A Series = Through Coolant A Series Bore Depth A Series R =
Right hand
Symbol
M
ABC = Indexable Boring
06 = 1,58mm
187 = 4,75mm Groove Width
(AGD style only)
Usage
Mini tip
ABD = Boring
09 = 2,39mm
281 = 7,14mm L =
Left hand
AGD = Grooving
125 = 3,18mm
312 = 7,93mm 03 = 0,76mm
APD = Pro ling
156 = 3,96mm
375 = 9,53mm 04 = 1,02mm
ATD = Threading 500 = 12,70mm 05 = 1,27mm
(AGD style only)
600 = 15,24mm Thread
(ATD style only)
095 = 2,79mm
625 = 15,88mm
B Series = Without Coolant
125 = 3,56mm
750 = 19,05mm F2 = 0,05mm
156 = 4,45mm
825 = 20,96mm Flat on thread
BB = Boring 875 = 22,23mm
BP = Pro ling (ATD style only) 1000 = 25,40mm
095 = 2,79mm
1250 = 31,75mm
125 = 3,56mm
1500 = 38,10mm
156 = 4,45mm
1750 = 44,45mm
2125 = 53,98mm
B Series
187 = 4,75mm
250 = 6,35mm
312 = 7,93mm
WID_Master16_Turning_Circle_D064_D065_Metric_REBRAND.indd 64 11/11/15 9:24 AM
D65
LViWID M 16 T i Ci l D064 D065 M i REBRANDN b 10 20151 56PM
widia.com
Grades and Grade Descriptions
A/B Series
Coatings provide high-speed
capability and are engineered
for fi nishing to light roughing.
Grade
PSteel
MStainless Steel
KCast Iron
NNon-Ferrous
SHigh-Temp Alloys
HHardened Materials
wear
resistance toughness
Coating Grade Description 05 10 15 20 25 30 35 40 45
CM1
Uncoated carbide. A very tough, ultra- ne grain unalloyed substrate.
For general-purpose machining of most steels, stainless steels, high-temperature
alloys, titanium, irons, and non-ferrous materials. Performs best at low speeds and
will handle interruptions and high feed rates. Use when C2, C3, or C25 fail
due to chipping or breaking.
P
M
K
N
S
HW-S25
CG5
A PVD-TiN-coated grade. Straight 9.5% Co substrate. Submicron grain. For
general-purpose machining of most steels, stainless steels, high-temperature alloys,
titanium, irons, and non-ferrous materials. Performs best at low speeds and
will handle interruptions and high feed rates.
P
M
K
N
S
HC-S25
CBN6
PcBN tip brazed onto a carbide insert. Recommended for machining hardened
steel (45–65 HRC). Use on bearing steel, hot and cold work tool steels, high-speed
steels, die steels, case-hardened steels, carburised and nitrided irons, and some
hard coatings. Can be run both dry and wet.
BN-H25 H
WID_Master16_Turning_Circle_D064_D065_Metric_REBRAND.indd 65 11/11/15 9:24 AM
D66
LViWID M 16 T i Ci l D066 D067 M i REBRAND O b 15 2015 10 25 AM
widia.com
Speed and Feed Chart
A/B Series Inserts • Metric
NOTE: Speed and feed rates and depth of cut may vary depending on materials and machining conditions including, but not
limited to, tool overhang, tool size, and finished surface requirements.
Cutting Speed — vc
m/min
CG5 CM1 CBN6
Material
Group min Start max min Start max min Start max
P
ap [mm] 0,025 -0,200 0,025 -0,203 – ––
f [mm/rev] 0,013 -0,178 0,013 -0,178 – ––
0/1 95 120 145 55 70 85 – ––
265 80 90 40 45 55 – ––
365 80 90 40 45 55 – ––
450 60 75 30 35 45 – ––
565 80 95 40 45 55 – ––
645 55 65 25 30 40 – ––
M
ap [mm] 0,025 -0,200 0,025 -0,200 – ––
f [mm/rev] 0,013 -0,178 0,013 -0,178 – ––
175 95 110 55 70 85 – ––
270 85 100 50 65 75 – ––
355 65 80 40 50 55 – ––
K
ap [mm] 0,001 -0,010 0,001 -0,010 – ––
f [mm/rev] 0,0005 -0,007 0,0005 -0,007 – ––
165 80 95 50 60 75 – ––
280 95 115 60 75 90 – ––
355 70 85 45 55 65 – ––
N
ap [mm] 0,025 –0,640 0,025 –0,640 – ––
f [mm/rev] 0,013 –0,178 0,013 –0,178 – ––
1405 505 605 405 505 605 – ––
2300 370 445 300 370 445 – ––
375 95 110 70 90 105 – ––
4140 175 210 105 125 155 – ––
5100 125 150 80 100 120 – ––
6100 125 150 80 100 120 – ––
7240 300 360 240 300 360 – ––
S
ap [mm] 0,025 -0,200 0,025 -0,200 – ––
f [mm/rev] 0,013 -0,178 0,013 -0,178 – ––
130 35 40 55 70 85 – ––
220 30 35 45 55 65 – ––
335 40 50 30 35 45 – ––
4–––––––––
H
ap [mm] –––––– 0,025 -0,200
f [mm/rev] –––––– 0,0005 -0,004
1–––––– 110 140 165
2–––––– 105 130 155
3––––––100 125 150
4–––––– 100 125 150
WID_Master16_Turning_Circle_D066_D067_Metric_REBRAND.indd 66 10/30/15 3:19 PM
D67
LViWID M 16 T i Ci l D066 D067 M i REBRANDO b 15 201510 25AM
widia.com
A/B Series
Solid Carbide Inserts
ABD
ISO
catalogue number D min L4 L F
CG5
CM1
CBN6
right hand
ABD06187R 1,58 5,41 21,92 0,66
2836639
2836632
–
ABD06312R 1,58 7,93 24,44 0,66
2836627
2836621
–
ABD09281R 2,39 7,14 23,65 1,04
2836614
2836608
–
ABD09500R 2,39 12,70 29,21 1,04
2836604
2836599
–
ABD125375R 3,18 9,53 26,04 1,45
2836593
2836588
–
ABD125625R 3,18 15,88 32,39 1,45
2836582
2836579
–
ABD156500R 3,96 12,70 29,21 1,85
2836573
–
–
ABD156875R 3,96 22,23 38,74 1,85
2836561
–
–
Tools for Small Hole Boring
rst choice
alternate choice
ABD-M
ISO
catalogue number D min L4 L F R¡
CG5
CM1
CBN6
right hand
ABD156875RM 3,96 22,23 38,74 1W,85 0,18
–
–
2836679
P
M
K
N
S
H
WID_Master16_Turning_Circle_D066_D067_Metric_REBRAND.indd 67 10/30/15 3:19 PM
D68
LViWID M 16 T i Ci l D068 D069 M i REBRAND N b 11 2015 12 23 PM
widia.com
A/B Series
Solid Carbide Inserts
AGD
ISO
catalogue number D min L4 L F CD W
CG5
CM1
CBN6
right hand
AGD09503 2,79 7,93 24,44 1,17 0,76 0,76
2836550
2836545
–
AGD12504 3,56 9,53 26,04 1,55 0,89 1,02
2836537
–
–
AGD15605 4,45 12,70 29,21 1,93 1,27 1,27
2836524
–
–
Tools for Small Hole Boring
rst choice
alternate choice
APD
ISO
catalogue number D min L4 L F CD R¡
CG5
CM1
CBN6
right hand
APD06187R 1,58 4,75 21,26 0,66 0,43 0,18
2836511
–
–
APD09281R 2,39 7,14 23,65 1,07 0,71 0,18
–
2836495
–
APD125375R 3,18 9,53 26,04 1,45 1,02 0,18
2836489
–
–
APD156500R 3,96 12,70 29,21 1,85 1,27 0,18
–
2836473
–
P
M
K
N
S
H
WID_Master16_Turning_Circle_D068_D069_Metric_REBRAND.indd 68 11/11/15 5:33 PM
D69
LViWID M 16 T i Ci l D068 D069 M i REBRANDN b 11 201512 23PM
widia.com
A/B Series
Solid Carbide Inserts
ATD
ISO
catalogue number D min L4 L F CD W TP min TP max TPI min TPI max
CG5
CM1
CBN6
right hand
ATD12560F2 3,56 9,53 26,04 1,55 0,69 0,05 1,06 0,53 24 48
–
2836450
–
ATD15660F2 4,45 12,70 29,21 1,93 0,81 0,05 1,27 0,53 20 48
2836443
2836436
–
Tools for Small Hole Boring
rst choice
alternate choice
BB
ISO
catalogue number D min L4 L F
CG5
CM1
CBN6
right hand
BB187750R 4,75 19,05 45,72 2,24
2832769
–
–
BB1871250R 4,75 31,75 58,42 2,24
2832758
–
–
BB2501000R 6,35 25,40 52,07 3,05
2832747
2832742
–
BB3121250R 7,93 53,98 80,65 3,84
2832724
2832719
–
P
M
K
N
S
H
WID_Master16_Turning_Circle_D068_D069_Metric_REBRAND.indd 69 11/11/15 5:33 PM
D70
LViWID M 16 T i Ci l D070 D071 M i REBRAND O b 15 2015 10 25 AM
widia.com
A/B Series
Solid Carbide Inserts
BP
ISO
catalogue number D min L4 L F CD R¡
CG5
CM1
CBN6
right hand
BP187600R 4,75 15,24 41,91 2,24 1,58 0,18
2832702
–
–
BP250825R 6,35 20,96 47,63 3,05 1,98 0,18
2832689
–
–
rst choice
alternate choice
Tools for Small Hole Boring
P
M
K
N
S
H
WID_Master16_Turning_Circle_D070_D071_Metric_REBRAND.indd 70 10/30/15 3:20 PM
D71
LViWID M 16 T i Ci l D070 D071 M i REBRANDO b 15 201510 25AM
widia.com
Small Hole Boring
Hardware
Insert Screws
order number
ISO
catalogue number Torx/hex
internal
thread
2840098 MSM46 2 mm M4X0.7
2840186 AS832/AS-8-32 5/64 #8-32
2892513 BS832 5/64 —
2820981 LTM16 T5 M2X0.4
2832647 CC11 T6 #1-72
2832635 CT11 T6 #1-72
2830477 FC11 T7 —
2828337 GT21 T7 #2-56
2825941 QTM20 T7 M2.5X0.45
2825948 QTM26 T7 M2.5X0.45
2826005 QC15 T8 #3-48
2826038 QC21 T9 #4-40
2823227 SC30 T10 #4-40
2823203 STM31 T15 M3.5 X 0.6
2832641 CT15 T16 #1-72
Tools for Small Hole Boring
Wrenches
order number
ISO
catalogue number Torx/hex
2840094 MKEY 2.0 mm
2840174 AKEY 5/64
2828318 GTKEY T5
2832628 CKEY T6
2830492 FKEY T7
2825973 Q8KEY T8
2825982 QKEY T9
2823182 SKEY T10
Drive Bits
order number
ISO
catalogue number Torx/hex
2840089 MBIT 2 mm
2832661 CBIT T6
2830497 FBIT T7
2825963 QTBIT T7
2825964 Q8BIT T8
2826045 QBIT T9
2823236 SBIT T10
2823196 STBIT T15
Wedges
order number
ISO
catalogue number
2840192 AW250/AW-250
2836024 BW312
WID_Master16_Turning_Circle_D070_D071_Metric_REBRAND.indd 71 10/30/15 3:20 PM
D72
LViWID M 16 T i Ci l D072 D073 M i REBRAND N b 11 2015 12 24 PM
widia.com
Features Benefi ts
• Fixed-limit stop for precise and repeatable
cutting edge positioning.
• Tight insert seat pocket ensures secure hold.
• V-slots and limit-stop bolts for increased
indexability.
• Internal coolant supply directly lubricates
cutting edge.
• Ability to rotate tool at 90° increments.
• For all boring, grooving, profi ling, and
threading applications.
Quadralock Ultra-Precision Tooling
Boring
Bore holes as small as 0,25mm.
Grooving
Groove in a 2,79mm diameter hole.
Profi ling
Profi le in diameters as small as 1,57mm.
Threading
Thread down to a No. 5; 2,54mm.
Quadralock
Easy access, quick-change toolholders and inserts perform multiple I.D.
applications for maximum productivity with one toolholder.
The unique cutting tip of the Quadralock™ I.D. Quick-Change Tooling System
can be locked in four different positions, enabling operation in both Swiss-style
and conventional machines. Four quick, easy setup steps and guaranteed insert
repeatability within ±0,013mm ensures superior performance.
Quadralock™ •
High-Precision Products for I.D. Applications
WID_Master16_Turning_Circle_D072_D073_Metric_REBRAND.indd 72 11/11/15 5:33 PM
D73
LViWID M 16 T i Ci l D072 D073 M i REBRANDN b 11 201512 24PM
widia.com
Quadralock Boring Bar
Identifi cation System
MTMM840
MTM M 8 40
Quadralock
Boring System
Type Shank Diameter
shown as “D”
Length
shown as “L”
M= Metric Metric Metric
8 = 8,00mm 40 = 38,10mm
10 = 10,00mm 100 = 101,60mm
12 = 12,00mm 127 = 127,00mm
16 = 16,00mm
22 = 22,00mm
Quadralock™
Catalogue Numbering System
WID_Master16_Turning_Circle_D072_D073_Metric_REBRAND.indd 73 11/11/15 5:33 PM
widia.com
D74
LViWID M 16 T i Ci l D074 D075 M i REBRAND N b 11 2015 7 45 AM
Quadralock™
Small Hole Toolholder
MTMM
order number catalogue number D D2 L L1 A
insert
screw hex
3896202 MTMM840 8,00 12,95 38 19 3,18 MSM46 2 mm
3896198 MTMM1040 10,00 12,95 38 19 3,00 MSM46 2 mm
3896200 MTMM1240 12,00 12,95 38 19 3,18 MSM46 2 mm
3896199 MTMM12100 12,00 12,95 102 19 3,00 MSM46 2 mm
3896201 MTMM22127 22,00 12,95 127 19 3,00 MSM46 2 mm
Tools for Small Hole Boring
WID_Master16_Turning_Circle_D074_D075_Metric_REBRAND.indd 74 11/11/15 9:25 AM
Customer Application
Support (CAS)
ORIGINATING
COUNTRY LANGUAGE TEL FAX EMAIL
Australia English +61 001 724 539 6921 * 001 724 539 6830 * ap.techsupport@widia.com
Austria German 0800 291630 0049 911 9735 429* eu.techsupport@widia.com
Belgium English / French 0800 80410 0049 911 9735 429* eu.techsupport@widia.com
China Chinese +86 400 889 2237 +86 21 58999985 * w-cn.techsupport@widia.com
Denmark English +45 808 89295 001 724 539 6830 * na.techsupport@widia.com
Finland English 0800 919413 001 724 539 6830 * na.techsupport@widia.com
France Frensh +33 080 5540 379 0049 911 9735 429* eu.techsupport@widia.com
Germany German 0800 1015774 0911 9735 429* eu.techsupport@widia.com
India English +91 001 724539 6921 * 001 724 539 6830 * ap.techsupport@widia.com
Israel English +972 1809 449907 001 724 539 6830 * na.techsupport@widia.com
Italy Italian 800 916568 02 89512146 * eu.techsupport@widia.com
Japan English +81 001 724539 6921 * 001 724 539 6830 * ap.techsupport@widia.com
Korea (South) English +82 001 724539 6921 * 001 724 539 6830 * ap.techsupport@widia.com
Malaysia English +60 001 724539 6921 * 001 724 539 6830 * ap.techsupport@widia.com
Netherlands English 0800 0201131 001 724 539 6830 * na.techsupport@widia.com
New Zealand English +64 001 724539 6921 * 001 724 539 6830 * ap.techsupport@widia.com
Norway English 800 10081 001 724 539 6830 * na.techsupport@widia.com
Poland Polish 00800 4411943 06166 56504* eu.techsupport@widia.com
Russia (landline) Russian +7 8800 5556395 0048 6166 56504* eu.techsupport@widia.com
Russia (cell phone) Russian +7 8005556395 0048 6166 56504* eu.techsupport@widia.com
Singapore English +65 001 724539 6921 * 001 724 539 6830 * ap.techsupport@widia.com
South Africa English +27 0800 981644 001 724 539 6830 * na.techsupport@widia.com
Sweden English +46 020798794 001 724 539 6830 * na.techsupport@widia.com
Taiwan English +886 001 724539 6921 * 001 724 539 6830 * ap.techsupport@widia.com
Thailand English +66 001 724539 6921 * 001 724 539 6830 * ap.techsupport@widia.com
United Kingdom English +44 0800 028 2996 001 724 539 6830 * na.techsupport@widia.com
Ukraine Russian +380 0800502665 0048 6166 56504* eu.techsupport@widia.com
USA English 888 539 5145 001 724 539 6830 * na.techsupport@widia.com
Easy Access to Proven Metalworking Expertise!
WIDIA™ Customer Application Engineers assist customers and engineering groups
throughout the world with expert tool selection and application recommendations
for the entire range of WIDIA tooling.
For more information, contact your local WIDIA
Authorised Distributor or visit widia.com/services.
Phone and fax numbers marked with * are not toll free.
WID_Master16_Turning_Circle_D074_D075_Metric_REBRAND.indd 75 11/11/15 9:25 AM
D76 widia.com
Quadralock™
Catalogue Numbering System
Quadralock Boring Bar Insert
Identifi cation System
MB125625R
MB 125 625 R
Insert Style Minimum Bore
shown as “D min”
Bore Depth, Groove Width,
Flat on Thread
shown as “L4, W”
Hand
of Tool
MB = Boring Metric Metric R =
Right hand
010 = 0,25mm Bore Depth
030 = 0,76mm 062 = 1,58mm L =
Left hand
062 = 1,58mm 187 = 4,75mm
094 = 2,39mm 281 = 7,14mm
125 = 3,18mm 312 = 7,93mm
MG = Grooving 156 = 3,96mm 375 = 9,53mm
500 = 12,70mm
(for MG and MT style only) 625 = 15,88mm
095 = 2,79mm 875 = 22,23mm
125 = 3,56mm
156 = 4,45mm
Groove Width
(for MG style only)
MP = Pro ling
030 = 0,76mm
040 = 1,02mm
050 = 1,27mm
Thread
(for MT style only)
MT = Threading
60F2 = 0,05mm
Flat on 60° thread
WID_Master16_Turning_Circle_D076_D077_Metric_REBRAND.indd 76 11/11/15 5:33 PM
D77
widia.com
Grades and Grade Descriptions
Quadralock™ Inserts
Coatings provide high-speed
capability and are engineered
for fi nishing to light roughing.
Grade
PSteel
MStainless Steel
KCast Iron
NNon-Ferrous
SHigh-Temp Alloys
HHardened Materials
wear
resistance toughness
Coating Grade Description 05 10 15 20 25 30 35 40 45
CM1
Uncoated carbide. A very tough, ultra- ne grain unalloyed substrate. For
general-purpose machining of most steels, stainless steels, high-temperature alloys,
titanium, irons, and non-ferrous materials. Performs best at low speeds
and will handle interruptions and high feed rates. Use when C2, C3, or C25
fail due to chipping or breaking.
P
M
K
N
S
HW-S25
CG5
A PVD-TiN-coated grade. Straight 9.5% Co substrate. Submicron grain. For
general-purpose machining of most steels, stainless steels, high-temperature alloys,
titanium, irons, and non-ferrous materials. Performs best at low speeds and
will handle interruptions and high feed rates.
P
M
K
N
S
HC-S25
WID_Master16_Turning_Circle_D076_D077_Metric_REBRAND.indd 77 11/11/15 5:33 PM
D78
LViWID M 16 T i Ci l D078 D079 M i REBRAND O b 15 2015 10 28 AM
widia.com
Speed and Feed Chart
Quadralock™ Inserts • Metric
NOTE: Speed and feed rates and depth of cut may vary depending on materials and machining conditions including, but not
limited to, tool overhang, tool size, and finished surface requirements.
Cutting Speed — vc
m/min
CG5 CM1
Material
Group min Start max min Start max
P
ap [mm] .001 -.008 .001 -.008
f [mm/rev] .0005 -.007 .0005 -.007
0/1 105 130 155 65 80 100
270 90 105 45 55 65
370 90 105 45 55 65
455 70 85 40 45 55
570 90 105 45 55 70
650 60 70 35 40 45
M
ap [mm] .001 -.008 .001 -.008
f [mm/rev] .0005 -.007 .0005 -.007
175 95 110 55 70 85
270 85 100 50 65 75
355 65 80 40 50 55
K
ap [mm] .001 -.010 .001 -.010
f [mm/rev] .0005 -.007 .0005 -.007
165 80 95 50 60 75
280 95 115 60 75 90
355 70 85 45 55 65
N
ap [mm] .001 –.025 .001 –.025
f [mm/rev] .0005 –.007 .0005 –.007
1405 505 605 405 505 605
2300 370 445 300 370 445
375 95 110 70 90 105
4140 175 210 105 125 155
5100 125 150 80 100 120
6100 125 150 80 100 120
7240 300 360 240 300 360
S
ap [mm] .001 -.008 .001 -.008
f [mm/rev] .001 -.007 .001 -.007
130 35 40 55 70 85
220 30 35 45 55 65
335 40 50 30 35 45
4––––––
H
ap [mm] ––––––
f [mm/rev] ––––––
1––––––
2––––––
3––––––
4––––––
WID_Master16_Turning_Circle_D078_D079_Metric_REBRAND.indd 78 10/30/15 3:20 PM
D79
LViWID M 16 T i Ci l D078 D079 M i REBRANDO b 15 201510 28AM
widia.com
Quadralock™
Solid Carbide Inserts
MB
ISO
catalogue number D min L4 L F R¡
CG5
CM1
right hand
MB010062R 0,25 1,58 20,57 0,09 0,03
2836098
2836085
MB062187R 1,58 5,41 21,92 0,66 0,05
2836423
3885985
MB062312R 1,58 7,93 24,44 0,66 0,05
2836418
2836263
MB094281R 2,39 7,14 23,65 1,04 0,05
–
3857732
MB094500R 2,39 12,70 29,21 1,04 0,05
2836405
2836251
MB125625R 3,18 15,88 32,39 1,45 0,10
–
2836240
MB156500R 3,96 12,70 29,21 1,85 0,10
2836388
3885997
MB156875R 3,96 22,23 38,74 1,85 0,10
–
2836229
rst choice
alternate choice
P
M
K
N
S
H
(continued)
Tools for Small Hole Boring
WID_Master16_Turning_Circle_D078_D079_Metric_REBRAND.indd 79 10/30/15 3:20 PM
D80
LViWID M 16 T i Ci l D080 D081 M i REBRAND N b 11 2015 7 49 AM
widia.com
NOTE: Actual bore depth for MB062187R and MB062187L equals 5,41mm.
ANSI Catalogue Number MB062187R and ANSI Catalogue Number MB062187L have an actual bore depth of .213”.
rst choice
alternate choice
(MB — continued)
Tools for Small Hole Boring
Quadralock™
Solid Carbide Inserts
ISO
catalogue number D min L4 L F R¡
CG5
CM1
MB010062L 0,25 1,58 20,57 0,09 0,03
3885960
3885959
MB030187L 0,76 4,75 21,26 0,34 0,03
3885961
3885962
MB062187L 1,58 5,41 21,92 0,66 0,05
3885983
3885984
MB062312L 1,58 7,93 24,44 0,66 0,05
3885986
3885987
MB094281L 2,39 7,14 23,65 1,04 0,05
–
3885989
MB094500L 2,39 12,70 29,21 1,04 0,05
3885990
3885991
MB125375L 3,18 9,53 26,04 1,45 0,10
3885992
3885993
MB125625L 3,18 15,88 32,39 1,45 0,10
3885994
3885995
MB156500L 3,96 12,70 29,21 1,85 0,10
3027643
3885996
MB156875L 3,96 22,23 38,74 1,85 0,10
3885998
3885999
P
M
K
N
S
H
WID_Master16_Turning_Circle_D080_D081_Metric_REBRAND.indd 80 11/11/15 9:25 AM
D81
LViWID M 16 T i Ci l D080 D081 M i REBRANDN b 11 20157 49AM
widia.com
MG
ISO
catalogue number D min L4 L F CD W
CG5
CM1
right hand
MG095030R 2,79 7,93 24,44 1,17 0,76 0,76
–
2836223
MG125040R 3,56 9,53 26,04 1,55 0,89 1,02
3897442
–
MG156050R 4,45 12,70 29,21 1,93 1,27 1,27
–
2836210
left hand
MG095030L 2,79 7,93 24,44 1,17 0,76 0,76
3886000
3886001
MG125040L 3,56 9,53 26,04 1,55 0,89 1,02
3886002
3886003
MG156050L 4,45 12,70 29,21 1,93 1,27 1,27
3897483
3897484
rst choice
alternate choice
P
M
K
N
S
H
Quadralock™
Solid Carbide Inserts
Tools for Small Hole Boring
WID_Master16_Turning_Circle_D080_D081_Metric_REBRAND.indd 81 11/11/15 9:25 AM
D82
LViWID M 16 T i Ci l D082 D083 M i REBRAND O b 15 2015 10 29 AM
widia.com
MP
ISO
catalogue number D min L4 L F CD R¡
CG5
CM1
right hand
MP062187R 1,58 4,75 21,26 0,66 0,43 0,10
2836357
–
MP094281R 2,39 7,14 23,65 1,07 0,71 0,10
2836351
3897488
MP125375R 3,18 9,53 26,04 1,45 1,02 0,20
2836345
2836190
MP156500R 3,96 12,70 29,21 1,85 1,27 0,20
2836339
2836184
left hand
MP062187L 1,58 4,75 21,26 0,66 0,43 0,10
–
3897486
MP094281L 2,39 7,14 23,65 1,07 0,71 0,10
3644074
3897487
MP125375L 3,18 9,53 26,04 1,45 1,02 0,20
–
3897490
MP156500L 3,96 12,70 29,21 1,85 1,27 0,20
3897491
3897492
3˚
38˚
Rε
rst choice
alternate choice
Quadralock™
Solid Carbide Inserts
Tools for Small Hole Boring
P
M
K
N
S
H
WID_Master16_Turning_Circle_D082_D083_Metric_REBRAND.indd 82 10/30/15 3:20 PM
D83
LViWID M 16 T i Ci l D082 D083 M i REBRANDO b 15 201510 29AM
widia.com
MT
ISO
catalogue number D min L4 L F CD W
CG5
CM1
right hand
MT09560F2R 2,79 7,93 24,44 1,17 0,56 0,05
–
2836180
MT12560F2R 3,56 9,53 26,04 1,55 0,69 0,05
2836328
3897497
MT15660F2R 4,45 12,70 29,21 1,93 0,81 0,05
–
2836168
left hand
MT09560F2L 2,79 7,93 24,44 1,17 0,56 0,05
3897493
3897494
MT12560F2L 3,56 9,53 26,04 1,55 0,69 0,05
3897496
3897495
MT15660F2L 4,45 12,70 29,21 1,93 0,81 0,05
3897498
3897499
rst choice
alternate choice
Quadralock™
Solid Carbide Inserts
Tools for Small Hole Boring
P
M
K
N
S
H
WID_Master16_Turning_Circle_D082_D083_Metric_REBRAND.indd 83 10/30/15 3:20 PM
widia.com
D84
LViWID M 16 T i Ci l D084 D085 M i REBRAND N b 30 2015 9 18 AM
Small Hole Boring
Hardware
Insert Screws
order number
ISO
catalogue number Torx/hex internal thread
2840098 MSM46 2 mm M4X0.7
2840186 AS832/AS-8-32 5/64 #8-32
2892513 BS832 5/64 —
2820981 LTM16 T5 M2X0.4
2832647 CC11 T6 #1-72
2832635 CT11 T6 #1-72
2830477 FC11 T7 —
2828337 GT21 T7 #2-56
2825941 QTM20 T7 M2.5X0.45
2825948 QTM26 T7 M2.5X0.45
2826005 QC15 T8 #3-48
2826038 QC21 T9 #4-40
2823227 SC30 T10 #4-40
2823203 STM31 T15 M3.5 X 0.6
2832641 CT15 T16 #1-72
Tools for Small Hole Boring
Wrenches
order number
ISO
catalogue number Torx/hex
2840094 MKEY 2.0 mm
2840174 AKEY 5/64
2828318 GTKEY T5
2832628 CKEY T6
2830492 FKEY T7
2825973 Q8KEY T8
2825982 QKEY T9
2823182 SKEY T10
Drive Bits
order number
ISO
catalogue number Torx/hex
2840089 MBIT 2 mm
2832661 CBIT T6
2830497 FBIT T7
2825963 QTBIT T7
2825964 Q8BIT T8
2826045 QBIT T9
2823236 SBIT T10
2823196 STBIT T15
Wedges
order number
ISO
catalogue number
2840192 AW250/AW-250
2836024 BW312
WID_Master16_Turning_Circle_D084_D085_Metric_REBRAND.indd 84 11/30/15 9:19 AM
WMT™
System
The WMT platform is the economical and reliable option for
all your grooving, cut-off, turning, and profi ling applications.
Trust the WMT system to ensure precise insert positioning
and provide only the most accurate machining with
exceptionally fast cycle times and superior performance.
Versatile and Well-Constructed
• Specifi cally designed to increase speeds and feeds.
• Excellent geometry for even your most demanding deep grooving applications.
• The WMT system enables heavy stock removal in turning applications.
• Ensures fi ner surface fi nishes and a long, reliable tool life.
WMT Toolholders
• Outstanding system rigidity and clamping capabilities.
• Guarantees fast cycle times and limited turret indexes.
• Precise insert positioning for accurate machining.
• Double-V shape means operator-friendly insert indexing and optimum insert positioning.
• Choice of integral or modular holders.
To learn more, contact your local Authorised Distributor or visit widia.com.
WID_Master16_Turning_Circle_D084_D085_Metric_REBRAND.indd 85 11/30/15 9:19 AM
D86
LViWID M 16 T i Ci l D086 D087 M i REBRAND O b 15 2015 10 29 AM
widia.com
Technical Information
Setup Recommendations
Setup Recommendations for Bar Overhang
WIDIA-CIRCLE
™
cutting tools are the nest quality boring, grooving, pro ling,
and threading tools available. For more than 50 years, WIDIA-CIRCLE
has been the industry leader in solving small-diameter hole machining
problems in major manufacturing plants worldwide.
A common problem associated with any cutting
tool is extending the tool beyond its support point.
This condition of excessive overhang can cause
chatter, poor nishes, or inadequate tool life. Toolholder
Overhang
We recommend a 4:1 ratio (4 times bar diameter) overhang when
using steel shank bars and up to a 10:1 (10 times bar diameter)
overhang when using carbide shank bars. The overhang ratios
are affected by many factors:
• Type(s) of material(s) being machined.
• Depth of cut(s).
• Feed rate(s).
Recommended conditions may still be unsatisfactory because
of chatter. Chatter can be induced by non-rigid setups or
harmonics from the machine or machining conditions. In many
cases, changing the RPM of the machine can reduce chatter.
shank diameter
(mm)
steel shank
ratio 4:1
(mm)
carbide shank
ratio 10:1
(mm)
4,00mm 16,00mm 40,00mm
5,00mm 20,00mm 50,00mm
6,00mm 24,00mm 60,00mm
8,00mm 32,00mm 80,00mm
10,00mm 40,00mm 100,00mm
12,00mm 48,00mm 120,00mm
16,00mm 64,00mm 160,00mm
20,00mm 80,00mm 200,00mm
25,00mm 100,00mm 250,00mm
32,00mm 128,00mm 320,00mm
WID_Master16_Turning_Circle_D086_D087_Metric_REBRAND.indd 86 10/30/15 3:20 PM
D87
LViWID M 16 T i Ci l D086 D087 M i REBRANDO b 15 201510 29AM
widia.com
Setup Information and Recommendations
Technical Information
Setup Recommendations
Tool “D” (above centreline)
Set ØB is de ected to position “DF,” relieving the
load by de ecting to asmaller bore, ØA. Tool“D”
cannot “dig in” because the cut (load) becomes
lighter as it de ects.
Tool “E” (on centreline or below)
Set ØB “digs in” and is de ected toward position
“EF” and bore ØC. The larger the load, the larger
the de ection.
Tip of the Insert
This enables the end user to hold closer tolerances,
produce a better nish, and avoid chatter.
ØA
ØB
ØC
D
DF
E
EF
0,25mm REF.
Machine Spindle
Boring Bar
Slant Bed Machines
0,25mm REF.
(insert parallel to turret travel)
Centre of Spindle
Built-in geometries of WIDIA-CIRCLE
™
precision
boring bars are based on the concept that the
boring bar shank will always be positioned on
the machine spindle centreline. The cutting point
will be slightly high (against direction of rotation)
except when facing centreline or cutting on
outside diameters.
Use WIDIA-CIRCLE precision setup level or:
1. Use centre height gage and position insert as
shown in illustration.
2. If centre point is unavailable, mark the centre of
the bar stock with a centring punch or square.
Position the insert as shown in illustration.
3. Lay a straight edge on the insert to help position
the insert parallel to the travel or centreline.
NOTE: In some cases, to help reduce
chatter or taper, the insert may
need to be rotated less than
0,25mm but morethan
0,05mm above centre.
WID_Master16_Turning_Circle_D086_D087_Metric_REBRAND.indd 87 10/30/15 3:20 PM
D88
LViWID M 16 T i Ci l D088 D089 M i REBRAND O b 15 2015 10 30 AM
widia.com
Technical Information
Setup Recommendations • Uni-Level Precision Setup Level
Uni-Level Precision Setup Level
For most machines:
Set the dial to the 0° mark.
For slant bed-type machines:
Set the dial to the degree of the bed.
Rotate O.D. Tooling (Turning) to rest here.
This sets the tooling at centreline.
Rotate I.D. Tooling (Boring)
to rest here. This sets the
tooling at 0,25mm above
centreline.
WID_Master16_Turning_Circle_D088_D089_Metric_REBRAND.indd 88 10/30/15 3:20 PM
D89
LViWID M 16 T i Ci l D088 D089 M i REBRANDO b 15 201510 30AM
widia.com
Technical Information
Setup Recommendations
Internal Grooving
Axial Feed
safe overhang conditions:
steel
ratio 4:1
(mm)
carbide
ratio 10:1
(mm)
surface footage(s): see pages D40–D41
radial feeds: C-Series = 0,008–0,025mm
Q-Series = 0,008–0,051mm
axial feeds: C-Series = 0,013–0,051mm
Q-Series = 0,013–0,127mm
Setup Information and Recommendations for Grooving
Setup Information and Recommendations for Boring and Profi ling
Radial Feed
Depth of Cut
Depth of Cut
Direction of Cut
Direction of Cut
5°
55°
25°
27.5°
CDG Indexable-Type Grooving Inserts
WID_Master16_Turning_Circle_D088_D089_Metric_REBRAND.indd 89 10/30/15 3:20 PM
D90
LViWID M 16 T i Ci l D090 D091 M i REBRAND O b 15 2015 10 30 AM
widia.com
Custom Solutions
Custom Solution Worksheet
Straight Shank-Type Boring Bars
For more than 50 years, WIDIA-CIRCLE
™
has offered the most reliable,
highest-quality small hole boring bars available.
Although our extensive product line covers most machining applications,
we understand that a custom solution tool may be required.
Steel or Carbide
Date
Customer-Specifi ed Dimensions
=O.A.L. (Overall Length) From 3x bar diameter to catalogue length.
=“F” Dimension
0,254mm from basic dimension shown in catalogue triangle insert bars only.
=“A” Dimension +10° to -10° triangle insert bars only.
=Flat Location(s) 1 Flat — no charge (see illustration above).
Special Instructions
(please make any necessary notes
or sketches in the box at right)
Closest Catalogue Standard
Customer
Distributor
Shipping Requirements
Attention Distributors: Use this worksheet
to collect information for your customer.
UGround UNext Day Air U2nd Day Air U3rd Day Air
Flat Location(s)
WID_Master16_Turning_Circle_D090_D091_Metric_REBRAND.indd 90 10/30/15 3:20 PM
D91
LViWID M 16 T i Ci l D090 D091 M i REBRANDO b 15 201510 30AM
widia.com
Step-Down Shank-Type Boring Bars
Custom Solutions
Custom Solution Worksheet
Use this worksheet to modify any of our existing products to
meet your own speci cations. If your special requirements do
not t any of these categories, contact us directly.
Steel or Carbide
Date
Customer-Specifi ed Dimensions
=Bore Depth 19,05mm to 6x diameter steel; 19,05mm to 10x diameter carbide.
=O.A.L. (Overall Length)
Steel; smaller than O.A.L. listed in catalogue carbide, bore depth, and standard sleeve length.
=“F” Dimension 0,254mm from basic dimension shown in catalogue triangle insert bars only.
=“A” Dimension +10° to -10° triangle insert bars only.
=Flat Location(s) 1 Flat — no charge (see illustration above).
Special Instructions
(please make any necessary notes
or sketches in the box at right)
Closest Catalogue Standard
Customer
Distributor
Shipping Requirements
Attention Distributors: Use this worksheet
to collect information for your customer.
UGround UNext Day Air U2nd Day Air U3rd Day Air
Head Diameter
Flat Location(s)
Bore Depth
WID_Master16_Turning_Circle_D090_D091_Metric_REBRAND.indd 91 10/30/15 3:20 PM
NOVO KNOWS
ART TO PART TO PROFIT
Being as productive and profi table as
possible is your fundamental goal. With
the addition of NOVO™ to your team, your
goal can be achieved. NOVO possesses
powerful digital tools that link together
process planning, inventory availability
and purchase, cost-per-part management,
and productivity improvements.
NOVO can ensure you have the right tools
on your machines, in the right sequence.
Resulting in fl awless execution that
accelerates every job, and maximises
every shift.
WID_Master16_Turning_Circle_D092_D093_Metric_REBRAND.indd 4 10/30/15 3:21 PM
WID_Master16_Turning_Circle_D092_D093_Metric_REBRAND.indd 5 10/30/15 3:21 PM
WID_Master16_Turning_Grooving&CutOff_E000_E001_Metric_REBRAND.indd 1 12/14/15 2:41 PM
widia.com E1
Turning • Grooving and Cut-Off
Grooving and Cut-Off Platforms ......................................................................................................................... E2–E3
WMT Grooving, Face Grooving, Cut-Off, and Profiling ................................................................................... E4–E39
TopGroove Shallow Grooving and Face Grooving ........................................................................................E40–E91
ProGroove Grooving and Cut-Off .................................................................................................................E92–E107
Separator for Cut-Off ...................................................................................................................................E108–E133
WID_Master16_Turning_Grooving&CutOff_E000_E001_Metric_REBRAND.indd 2 12/14/15 2:41 PM
E2 widia.com
WMT
™
TopGroove
™
ProGroove
™
• Insert cutting widths: 2–8mm.
• O.D. cutting depths: 16,5–25,4mm.
• I.D. boring bar minimum bore diameter:
57,15mm.
• Screw-clamping integral shank/cartridge
toolholders available.
• Geometry for deep grooving.
• Insert cutting widths: 0,5–6,35mm.
• Insert cutting depths: 0,64–12,7mm.
• I.D. boring bar minimum bore diameter:
11,2mm.
• Integral shank toolholders available.
• Insert cutting depths: 10–40mm.
• Inserts enable precision sintered
execution, good tolerances,
and repeatability.
• Screw-clamping integral shank
toolholders available.
• Grooving and O.D. turning.
Pages:
E4–E39
Pages:
E40–E91
Pages:
E92–E104
LG
• Insert cutting widths: 8–16mm.
• O.D. cutting depths: 20–32mm.
• Wedge-clamping integral shank
tooling available.
Pages:
E105–E107
Grooving and Cut-Off Platforms
WMT Separator
™
ProGroove
• Cut-off widths: 1,5–4mm.
• Maximum cutting depth: 22,2mm.
• Screw-clamping integral shank/cartridge
toolholders available.
• Economical double-sided inserts for rigidity
and dimensional accuracy.
• Right-/left-hand styles: 5˚ and 12˚ lead
angles.
• Cut-off widths: 2–4mm.
• Positive mechanical, self-clamping blades.
• Right-/left-hand style toolholders available.
• Single-edge inserts for maximum depth
capacity.
• Cut-off widths: 2–8mm.
• Single-edge inserts for maximum depth
capacity.
• Right-/left-hand styles with 6˚ lead angles.
• Self-clamping blades/screw-clamping
integral shank toolholders available.
Pages:
E4–E39
Pages:
E108–E133
Pages:
E92–E104
WMT ProGroove
Heavy Stock Removal in Turning Applications For Light-Cutting Inserts
• Double-sided inserts, cutting widths: 2–8mm.
• O.D. cutting depths: 16,5–25,4mm.
• I.D. boring bar minimum bore diameter: 57,15mm.
• Screw-clamping integral shank/cartridge toolholders
available.
• Cutting widths: 2–8mm.
• O.D. cutting depths: 10–40mm.
• Single-edge inserts for maximum depth capacity.
• Screw-clamping integral shank toolholders available.
Pages:
E4–E39
Pages:
E92–E104
Grooving
Cut-Off
Plunge
and Turn
WID_Master16_Turning_Grooving&CutOff_E002_E003_Metric_REBRAND.indd 2 11/11/15 9:25 AM
E3
widia.com
Grooving and Cut-Off Platforms
WMT
™
TopGroove
™
• Cutting widths: 3–6,35mm.
• Cutting depths: 13–25,4mm.
• Minimum face groove diameter:
38–205mm.
• NF/NFD face groove insert range: 24–57mm.
• Cutting width range for standard inserts: 0,8–9,5mm.
• Cutting depth range for standard inserts: 1,27–12,70mm.
• Cutting width range for NF/NFD face grooving inserts: 2–6,35mm.
• Standard insert minimum face groove diameter range: 54–330mm.
• Cutting depth range for NF/NFD face grooving inserts: 1,52–12,70mm.
• Cutting depth range for NF: 1,52–3,81mm.
• Cutting depth range for NFD: 6,35–12,7mm.
Pages:
E4–E39
Pages:
E40–E91
WMT TopGroove ProGroove
™
For Heavy Stock Removal Moderate/Heavy Stock Removal
at Shallow Profi le Depths
For Light Cutting
• Full-radius insert cutting widths: 3–8mm.
• O.D. cutting depths: 16,5–25,4mm.
• Screw-clamping integral shank/cartridge
toolholders available.
• Full-radius insert cutting widths:
1,57–6,35mm.
• Insert cutting depths: 2,39–6,35mm.
• Integral shank toolholders and
ERICKSON
™
heads available.
• Full-radius insert cutting widths: 3–6mm.
• O.D. cutting depths: 10–32mm.
• Screw-clamping integral shank/cartridge
toolholders available.
Pages:
E4–E39
Pages:
E40–E91
Pages:
E92–E104
TopGroove
• Undercutting insert widths: 2,4–4mm.
• Economical double-ended inserts.
Pages:
E40–E91
Face
Grooving
Profi ling
Undercutting
WID_Master16_Turning_Grooving&CutOff_E002_E003_Metric_REBRAND.indd 3 11/11/15 9:25 AM
E4 widia.com
Versatile and Well-Constructed
• Specifi cally designed to increase speeds and feeds.
• Excellent geometry for even your most demanding deep grooving applications.
• The WMT system enables heavy stock removal in turning applications.
• Ensures fi ner surface fi nishes and a long, reliable tool life.
WMT
The WMT platform is the economical and reliable option for all your grooving,
cut-off, turning, and profi ling applications. Trust the WMT system to ensure
precise insert positioning and provide only the most accurate machining with
exceptionally fast cycle times and superior performance.
WMT™ System •
One Platform for Grooving, Face Grooving,
Cut-Off, and Profi ling
WID_Master16_Turning_Grooving&CutOff_E004_E005_Metric_REBRAND.indd 4 11/11/15 5:33 PM
E5
widia.com
WMT™ Toolholders
• Outstanding system rigidity and clamping capabilities.
• Guarantees fast cycle times and limited turret indexes.
• Precise insert positioning for accurate machining.
• Double-V shape means operator-friendly insert indexing
and optimum insert positioning.
• Choice of integral or modular holders.
Extra-long clamping area for
unsurpassed grooving
and turning stability.
Interchangeable grooving and
cut-off inserts designed for
excellent chip control.
WID_Master16_Turning_Grooving&CutOff_E004_E005_Metric_REBRAND.indd 5 11/11/15 5:33 PM
E6 widia.com
PSteel
MStainless Steel
KCast Iron
NNon-Ferrous
SHigh-Temp Alloys
HHardened Materials
Inside Diameter
(I.D.) Grooving
Face Grooving
Cut-Off
Profi ling Outside Diameter
(O.D.) Grooving
Plunge and Turn
1 Choose the application to be performed:
2 Identify the material to be machined:
Groove depth, width, and pro le.
Each tool has a material grid marked with a letter
indicating the materials that can be machined.
WMT™ Turning, Grooving, Cut-Off, and Profi ling
Choosing the Correct WMT Tooling
The Most Advanced Turning Solutions in the Industry
For unsurpassed quality, value, and performance, look no further than the
WIDIA
™
comprehensive line of specially engineered and dependable
grooving and cut-off solutions. All the tools you need from the reliable
name you can trust!
The WMT system, with its extra-long clamping area and precise insert
positioning, ensures exceptionally fast and accurate machining,
all-in-one tool, for your most demanding grooving, cut-off, turning,
and pro ling applications.
It is perfect for all general-purpose operations, including both shallow
and deep grooving.
Utilise this handy, easy-to-use guide to identify and select the appropriate
grooving and cut-off tools for your speci c needs.
WID_Master16_Turning_Grooving&CutOff_E006_E007_Metric_REBRAND.indd 6 11/11/15 5:33 PM
E7
widia.com
application
conventional
toolholders
modular
blades
O.D. Grooving and Cut-Off pages E30–E32 page E38
Face Grooving pages E33–E34 page E39
I.D. Grooving page E35 –
Plunge and Turn pages E30–E32 page E38
3 Select your toolholder based on
the application:
A Choose the appropriate width
“W” required for the application.
B Choose the shortest cutting depth
“CD” dimension for increased
tool rigidity.
C Select the largest toolholder
shank “H” and “B” dimensions
for maximum rigidity.
Choosing the Correct WMT Tooling
WMT™ Turning, Grooving, Cut-Off, and Profi ling
A
B C
A B C
C
WID_Master16_Turning_Grooving&CutOff_E006_E007_Metric_REBRAND.indd 7 11/11/15 5:33 PM
E8 widia.com
4 Select chipbreaker style
for the application:
CM Cut-Off Medium
CM-W Cut-Off Medium with Wiper
PT Groove, Plunge, and Turn
PC Plunge and Contour
PH Groove, Plunge, and Turn
A Choose the appropriate insert width
“W” for your speci c application.
B Select the required corner
radius value “RR”.
WMT™ Turning, Grooving, Cut-Off, and Profi ling
Choosing the Correct WMT Tooling
NOTE: Chart shows recommended
starting feed rates.
A B
WID_Master16_Turning_Grooving&CutOff_E008_E009_Metric_REBRAND.indd 8 11/11/15 5:33 PM
E9
widia.com
Recommended Grades
Grooving
cutting condition steel stainless steel cast iron
non-ferrous
metals
high-temp
alloys
hardened
materials
heavily interrupted cut WU25PT WU25PT WU25PT WU25PT WU25PT –
lightly interrupted cut WP25CT/
WU25PT WU25PT WP25CT/
WU25PT WU25PT WU25PT –
varying depth of cut, casting,
or forging skin WU10PT WU10PT WP10CT/
WU10PT WU10PT WU10HT/
WU10PT WU10PT
smooth cut, pre-turned surface WP10CT/
WU10PT WU10PT WP10CT/
WU10PT WU10PT WU10HT/
WU10PT WU10PT
5 Select grade:
6 Determine cutting data:
A Based on material group and grade,
identify starting speed (vc).
B First choice starting speed is in bold.
NOTE: See page E11 for Grades and Grade Descriptions.
NOTE: See page E13 for cutting data.
WMT™ Turning, Grooving, Cut-Off, and Profi ling
Choosing the Correct WMT Tooling
Recommended Grades
Cut-Off
cutting condition steel stainless steel cast iron non-ferrous
metals
high-temp
alloys
hardened
materials
heavily interrupted cut WU25PT WU25PT WU25PT WU25PT WU25PT –
lightly interrupted cut WU25PT WU25PT WU25PT WU25PT WU25PT –
varying depth of cut, casting,
or forging skin WU25PT WU25PT WU25PT WU25PT WU25PT WU25PT
smooth cut, pre-turned surface WU25PT WU25PT WU25PT WU25PT WU25PT WU25PT
B
A
WID_Master16_Turning_Grooving&CutOff_E008_E009_Metric_REBRAND.indd 9 11/11/15 5:34 PM
E10
LViWID M 16 T i G i &C Off E010 E011 M i REBRANDN b 10 201512 23PM
widia.com
WMT Identifi cation System
WMT™ Turning, Grooving, and Cut-Off
Catalogue Numbering System
WMTC015N00CM08
Each character in our catalogue number signi es a speci c trait of
that product. Use the following key columns and corresponding
images to easily identify which attributes apply.
WMT C 015 N 00 CM 08
Tooling
System
Cut-Off W in
mm* 10
Hand
of Insert
Main Cutting
Edge Lead
Angle
Chipbreaker
Geometry
CM = Cut-Off
Medium
CM-W = Cut-Off
Medium with
Wiper
Corner Radius
in mm* 10
Cut-Off
WMTS205M2U02PT
Groove, Plunge, Turn, and Contour Inserts
WMT S 205 M 2 U 02 PT
Tooling
System
Square mm* 10
inch* 1000
Unit of
Measurement
for Width
M = mm
I = inch
Seat Size Insert
Tolerance
Corner
Radius in
mm* 10
Chipbreaker
Geometry
PT = Groove,
Plunge,
and Turn
PH = Groove,
Plunge,
and Turn
PC = Plunge
and Contour
P = Precision ground grooving
width tolerance:
± .001" (0,025mm)
U = Utility moulded grooving
width tolerance:
3,05–4,05: + .006" (+0,15mm)
-0 -0
5,05–10,05: + .010" (+0,25mm)
-0 -0
WID_Master16_Turning_Grooving&CutOff_E010_E011_Metric_REBRAND.indd 10 11/10/15 2:17 PM
E11
LViWID M 16 T i G i &C Off E010 E011 M i REBRANDN b 10201512 23PM
widia.com
WMT™ Turning, Grooving, and Cut-Off
Grades and Grade Descriptions
Grade
Coatings provide high-speed
capability and are engineered
for fi nishing to heavy roughing.
PSteel
MStainless Steel
KCast Iron
NNon-Ferrous
SHigh-Temp Alloys
HHardened Materials
wear
resistance toughness
Coating Grade Description 05 10 15 20 25 30 35 40 45
WU10PT
An advanced PVD-TiAlN coating over a very deformation-resistant unalloyed carbide
substrate. The WU10PT
™
grade’s new and improved coating enables speeds to be increased
by 50–100%. The WU10PT grade is ideal for nishing to general machining of most
workpiece materials at higher speeds. Excellent for machining most steels, stainless steels,
cast irons, non-ferrous materials, and super alloys under stable conditions. It also performs
well machining hardened and short chipping materials.
P
M
K
N
S
HC-P15 H
WU25PT
An advanced PVD-TiAlN-coated grade with a tough, ultra- ne-grain, unalloyed substrate.
For general-purpose machining of most steels, stainless steels, high-temperature alloys,
titanium, irons, and non-ferrous materials. Speeds may vary from low to medium and will
handle interruptions and high feed rates.
P
M
K
N
S
HC-P30 H
WU10HT
A hard, low binder content, unalloyed WC/Co ne-grained uncoated grade. Exceptional
edge wear resistance combined with very high strength for machining titanium, cast irons,
austenitic stainless steels, non-ferrous metals, non-metals, and most high-temperature
alloys. Superior thermal deformation and depth of cut notch resistance. The grain structure is
well controlled for minimal pits and aws, which contributes to long, reliable service.
M
K
N
S
HW-K15
WP10CT
A specially engineered, proprietary, cobalt-enriched carbide grade with thick K-MTCVD-TiCN
coating layer, an Al2O3 layer of controlled grain size, and outer layers of TiCN and TiN for
maximum wear resistance. An excellent nishing to medium machining grade for a variety of
workpiece materials including most steels, ferritic and martensitic stainless steels, and cast
irons. The specially engineered cobalt-enriched substrate offers a balanced combination of
deformation resistance and edge toughness, while the thick coating layers offer outstanding
abrasion resistance and crater wear resistance for high-speed machining. The smooth
coating provides good resistance to edge build-up and microchipping and produces
excellent surface nishes.
P
K
HC-P10
WP25CT
A tough cobalt-enriched carbide grade with a newly designed multilayer K-MTCVD TiCN-
Al2O3-TiCNTiN coating with superior interlayer adhesion. This is the industry’s best
general-purpose turning grade for most steels and ferritic and martensitic stainless steels.
The substrate design, with cobalt-enrichment, ensures adequate deformation resistance
along with excellent bulk toughness and insert edge strength. The coating layers offer
good wear resistance over a wide range of machining conditions. The smoothness of the
coating leads to reduced frictional heat, minimises microchipping, and improves
workpiece surface nishes.
P
K
HC-P25
WID_Master16_Turning_Grooving&CutOff_E010_E011_Metric_REBRAND.indd 11 11/10/15 2:17 PM
widia.com
E12
LViWID M 16 T i G i &C Off E012 E013 M i REBRANDN b 11 201512 38PM
R0,2
R1,06
size 2
size 3
size 4
size 5
size 6
size 7
size 8
size 2
size 3
size 4
size 5
size 6
size 8
1 Recommended Starting Feed
WMT™ Turning, Grooving, Cut-off, and Profi ling
Feed Values for Grooving Inserts
CM Cut-Off Medium • Double-ended, V-bottom, and top, mechanically
clamped.
• Neutral, right-, and left-hand lead angles up to 12˚.
• Designed to increase speed and feed.
• Chip geometry designed for excellent chip control
and minimised cutting pressure on various materials.
CM-W Cut-Off
Medium with Wiper
• Wiper ats where surface nish is critical.
• Double-ended, V-bottom, and top, mechanically
clamped.
• Neutral, right-, and left-hand lead angles up to 12˚.
• Designed to increase speed and feed.
• Chip geometry designed for excellent chip control
and minimised cutting pressure on various materials.
• Ideal for 300 Series stainless steel, tool steel,
titanium, INCONEL®, and other nickel-based alloys
at moderate speeds and feeds.
PT Plunge, Groove,
and Turn Inserts
• High positive rake geometry for low cutting force,
especially in soft materials.
• Deep grooving tool for plunge and turn
O.D. and face grooving operations.
• Delivers chip control over full range of DOC
when turning.
• Cuts in both axial and radial directions.
PC Grooving and
Profi ling Inserts
• Superior chip control.
• Full nose radius geometry for plunge
and contour operations.
• Effective cutting edge geometry exceeds
180° for increased versatility.
PH Plunge, Groove,
and Turn Inserts
• Excellent performance in greater than 35 HRC.
• Deep grooving tool for plunge and turn O.D.
and face grooving operations.
• Delivers chip control over full range of DOC
when turning.
• Delivers superior chip control in interrupted cuts.
feed rate [mm/rev]
6,3
5,5
4,0
2,5
1,6
1,0
0,5
turn/pro le feed
mm/rev 0,1 0,16 0,25 0,4
plunge groove feed
mm/rev 0,05 0,1 0,16 0,30
feed rate [mm/rev]
6,3
5,5
4,0
2,5
1,6
1,0
0,5
turn/pro le feed
mm/rev 0,1 0,16 0,25 0,4
plunge groove feed
mm/rev 0,05 0,1 0,16 0,30
feed rate [mm/rev]
0,30
0,28
0,25
0,23
0,20
0,18
0,15
0,13
0,10
0,08
0,05
width of cut
[mm] 1,5 and 2,0 2,5 3,0 4,0
WID_Master16_Turning_Grooving&CutOff_E012_E013_Metric_REBRAND.indd 12 11/11/15 5:34 PM
widia.com E13
LViWID M 16 T i G i &C Off E012 E013 M i REBRANDN b 11201512 38PM
WMT™ Turning, Grooving, and Cut-Off
Recommended Cutting Speeds • Metric
Cutting Speed — vc
m/min
Material
Group
WU10HT WU10PT WU25PT WP10CT WP25CT
min Start max min Start max min Start max min Start max min Start max
P
0/1 100 100 110 190 200 210 170 175 180 210 225 240 170 175 180
295 95 105 180 185 190 150 160 170 210 220 230 185 195 205
395 95 105 180 185 190 150 160 170 210 220 230 185 195 205
470 70 75 165 170 175 135 145 155 140 145 155 125 125 135
585 90 95 170 175 180 140 150 160 180 190 195 155 165 170
650 50 50 140 150 160 120 125 130 70 75 80 70 75 80
M
170 75 80 120 125 130 120 125 130 – –––––
250 50 50 100 100 110 70 75 80 – –––––
350 50 50 95 100 105 85 90 95 – –––––
K
185 90 95 190 200 210 155 165 170 215 225 235 180 190 195
275 75 80 185 190 200 155 165 175 205 215 225 175 185 195
370 75 80 170 175 180 140 150 160 210 225 240 190 200 210
N
170 75 80 140 150 160 110 120 130 – –––––
270 75 80 140 150 80 110 120 80 – –––––
370 75 80 140 150 80 110 120 80 – –––––
470 75 80 140 150 80 110 120 80 – – – – – –
570 75 80 140 150 80 110 120 80 – –––––
670 75 80 140 150 80 110 120 80 – –––––
770 75 80 140 150 120 110 120 105 – –––––
S
120 25 30 70 75 80 60 65 65 – –––––
220 25 30 65 65 70 50 50 50 – –––––
350 50 50 100 100 110 70 75 80 – –––––
4-––7075 80 50 50 50 – –––––
H
1–––1530 60 15 30 60 – –––––
2–––1530 60 15 30 60 – –––––
3–––1530 60 15 30 60 – –––––
4–––1530 60 15 30 60 – –––––
WID_Master16_Turning_Grooving&CutOff_E012_E013_Metric_REBRAND.indd 13 11/11/15 5:34 PM
E14
LViWID M 16 T i G i &C Off E014 E015 M i REBRANDN b 11 20157 55AM
widia.com
WMT™ Turning, Grooving, and Cut-Off
P
M
K
N
S
H
Cut-Off Inserts
catalogue number
seat
size W RR LI _L hand
WP10CT
WP25CT
WU10PT
WU25PT
WU10HT
WMTC015L05CM08 1 1,50 0,08 19,31 5 L - Left
–
–
–
4169671
–
WMTC020L05CM08 2 1,99 0,08 19,21 5 L - Left
–
–
–
4169677
–
WMTC020L12CM08 2 2,00 0,08 19,25 12 L - Left
–
–
–
4169680
–
WMTC030L12CM17 3 3,00 0,17 25,40 12 L - Left
–
–
–
4169690
–
WMTC030L05CM17 3 3,00 0,17 25,40 5 L - Left
–
–
–
4169686
–
WMTC040L12CM17 4 4,00 0,17 25,40 12 L - Left
–
–
–
4169697
–
WMTC040L05CM17 4 4,00 0,17 25,40 5 L - Left
–
–
–
4169695
–
WMT-CM
catalogue number
seat
size W RR LI hand
WP10CT
WP25CT
WU10PT
WU25PT
WU10HT
WMTC015N00CM08 1 1,50 0,08 19,30 N - Neutral
–
–
–
4169668
–
WMTC020N00CM08 2 2,00 0,08 19,21 N - Neutral
–
–
–
4169673
–
WMTC094N00CM13 2B 2,39 0,13 22,32 N - Neutral
–
–
–
4169576
–
WMTC030N00CM17 3 3,00 0,17 25,40 N - Neutral
–
–
–
4169682
–
WMTC125N00CM17 3 3,17 0,17 25,41 N - Neutral
–
–
–
4169582
–
WMTC040N00CM17 4 4,00 0,17 25,40 N - Neutral
–
–
–
4169692
–
Neutral
RR = RL on neutral inserts
Left Hand
rst choice
alternate choice
Grooving and Cut-Off
(continued)
WID_Master16_Turning_Grooving&CutOff_E014_E015_Metric_REBRAND.indd 14 11/11/15 9:26 AM
E15
LViWID M 16 T i G i &C Off E014 E015 M i REBRANDN b 1120157 55AM
widia.com
WMT™ Turning, Grooving, and Cut-Off
P
M
K
N
S
H
Cut-Off Inserts
catalogue number
seat
size W RL LI _R hand
WP10CT
WP25CT
WU10PT
WU25PT
WU10HT
WMTC015R12CM08 1 1,50 0,08 19,28 12 R - Right
–
–
–
4169672
–
WMTC015R05CM08 1 1,50 0,08 19,31 5 R - Right
–
–
–
4169670
–
WMTC020R05CM08 2 2,00 0,08 19,26 5 R - Right
–
–
–
4169675
–
WMTC020R12CM08 2 2,00 0,08 19,26 12 R - Right
–
–
–
4169678
–
WMTC094R12CM13 2B 2,39 0,13 22,28 12 R - Right
–
–
–
4169580
–
WMTC094R05CM13 2B 2,39 0,13 22,32 5 R - Right
–
–
–
4169578
–
WMTC030R05CM17 3 3,00 0,17 25,40 5 R - Right
–
–
–
4169684
–
WMTC030R12CM17 3 3,00 0,17 25,40 12 R - Right
–
–
–
4169688
–
WMTC125R05CM17 3 3,17 0,17 25,40 5 R - Right
–
–
–
4169664
–
WMTC125R12CM17 3 3,18 0,17 25,40 12 R - Right
–
–
–
4169666
–
WMTC040R12CM17 4 4,00 0,17 25,40 12 R - Right
–
–
–
4169696
–
WMTC040R05CM17 4 4,00 0,17 25,40 5 R - Right
–
–
–
4169694
–
Right Hand
rst choice
alternate choice
Grooving and Cut-Off
(WMT-CM — continued)
WID_Master16_Turning_Grooving&CutOff_E014_E015_Metric_REBRAND.indd 15 11/11/15 9:26 AM
E16
LViWID M 16 T i G i &C Off E016 E017 M i REBRANDO b 15 201510 34AM
widia.com
WMT™ Turning, Grooving, and Cut-Off
P
M
K
N
S
H
Cut-Off Inserts with Wiper
catalogue number
seat
size W RR LI _L hand
WP10CT
WP25CT
WU10PT
WU25PT
WU10HT
WMTC020L12CMW08 2 2,00 0,08 19,27 12 L - Left
–
–
–
4169681
–
WMTC030L12CMW17 3 3,00 0,17 25,40 12 L - Left
–
–
–
4169691
–
WMTC030L05CMW17 3 3,00 0,17 25,40 5 L - Left
–
–
–
4169687
–
WMT-CM-W
catalogue number
seat
size W RR LI hand
WP10CT
WP25CT
WU10PT
WU25PT
WU10HT
WMTC015N00CMW08 1 1,50 0,08 19,30 N - Neutral
–
–
–
4169669
–
WMTC020N00CMW08 2 2,00 0,08 19,21 N - Neutral
–
–
–
4169674
–
WMTC094N00CMW13 2B 2,39 0,13 22,32 N - Neutral
–
–
–
4169577
–
WMTC030N00CMW17 3 3,00 0,17 25,40 N - Neutral
–
–
–
4169683
–
WMTC125N00CMW17 3 3,18 0,17 25,41 N - Neutral
–
–
–
4169663
–
WMTC040N00CMW17 4 4,00 0,17 25,40 N - Neutral
–
–
–
4169693
–
Grooving and Cut-Off
Neutral
RR = RL on neutral inserts
Left Hand
rst choice
alternate choice
(continued)
WID_Master16_Turning_Grooving&CutOff_E016_E017_Metric_REBRAND.indd 16 10/30/15 3:24 PM
E17
LViWID M 16 T i G i &C Off E016 E017 M i REBRANDO b 15201510 34AM
widia.com
WMT™ Turning, Grooving, and Cut-Off
P
M
K
N
S
H
Cut-Off Inserts with Wiper
catalogue number
seat
size W RL LI _R hand
WP10CT
WP25CT
WU10PT
WU25PT
WU10HT
WMTC020R05CMW08 2 2,00 0,08 19,20 5 R - Right
–
–
–
4169676
–
WMTC020R12CMW08 2 2,00 0,08 19,27 12 R - Right
–
–
–
4169679
–
WMTC094R12CMW13 2B 2,39 0,13 22,29 12 R - Right
–
–
–
4169581
–
WMTC094R05CMW13 2B 2,39 0,13 22,32 5 R - Right
–
–
–
4169579
–
WMTC030R05CMW17 3 3,00 0,17 25,40 5 R - Right
–
–
–
4169685
–
WMTC030R12CMW17 3 3,00 0,17 25,40 12 R - Right
–
–
–
4169689
–
WMTC125R05CMW17 3 3,17 0,17 25,41 5 R - Right
–
–
–
4169665
–
WMTC125R12CMW17 3 3,17 0,17 25,41 12 R - Right
–
–
–
4169667
–
Grooving and Cut-Off
Right Hand
rst choice
alternate choice
(WMT-CM-W — continued)
WID_Master16_Turning_Grooving&CutOff_E016_E017_Metric_REBRAND.indd 17 10/30/15 3:24 PM
widia.com
E18
LViWID M 16 T i G i &C Off E018 E019 M i REBRANDO b 15 201510 34AM
WMT™ Turning, Grooving, and Cut-Off
P
M
K
N
S
H
Grooving and Turning Inserts
WMT-U-PT • Moulded
catalogue number
seat
size W RR LI
WP10CT
WP25CT
WU10PT
WU25PT
WU10HT
WMTS205M2U02PT 2 2,05 0,15 19,23
4169554
4169555
4116131
4116132
–
WMTS305M3U03PT 3 3,05 0,31 25,81
4169556
4169557
4113568
4113569
–
WMTS305M3U06PT 3 3,05 0,61 25,78
4169558
4169559
4113570
4113571
–
WMTS405M4U03PT 4 4,05 0,31 25,53
4169560
4169561
4113577
4113578
–
WMTS405M4U06PT 4 4,05 0,61 25,53
4169562
4169563
4113579
4113580
–
WMTS505M5U03PT 5 5,05 0,30 28,76
4169564
4169565
4116148
4116149
–
WMTS505M5U06PT 5 5,05 0,61 28,76
4169566
4169567
4116150
4116151
–
WMTS605M6U03PT 6 6,05 0,30 28,76
4169568
4169569
4117253
4117254
–
WMTS605M6U06PT 6 6,05 0,59 28,76
4169570
4169571
4117255
4117256
–
WMTS805M8U06PT 8 8,05 0,61 28,70
4169572
4169573
4117261
4117262
–
WMTS805M8U15PT 8 8,05 1,50 28,71
4169574
4169575
4117263
4117264
–
Grooving and Cut-Off
RR = RL
rst choice
alternate choice
WID_Master16_Turning_Grooving&CutOff_E018_E019_Metric_REBRAND.indd 18 10/30/15 3:24 PM
E19
LViWID M 16 T i G i &C Off E018 E019 M i REBRANDO b 15201510 34AM
widia.com
WMT™ Turning, Grooving, and Cut-Off
P
M
K
N
S
H
Grooving and Turning Inserts
WMT-P-PT • Precision
catalogue number
seat
size W RR LI
WP10CT
WP25CT
WU10PT
WU25PT
WU10HT
WMTS200M2P02PT 2 2,00 0,15 19,10
–
–
4116129
4116130
–
WMTS094I2BP02PT 2B 2,38 0,15 22,15
–
–
4118451
4118452
–
WMTS094I2BP04PT 2B 2,38 0,38 22,14
–
–
4118583
4118584
–
WMTS300M3P03PH 3 3,00 0,30 25,65
–
–
5346412
5346413
5346414
WMTS300M3P03PT 3 3,00 0,31 25,65
–
–
4113563
4113564
4113566
WMTS300M3P06PH 3 3,00 0,60 25,65
–
–
5346415
5346416
5346417
WMTS300M3P06PT 3 3,00 0,61 25,65
–
–
4113565
4113567
–
WMTS125I3P03PT 3 3,17 0,23 25,40
–
–
4118585
4118586
–
WMTS125I3P08PT 3 3,17 0,76 25,40
–
–
4118587
4118588
–
WMTS125I3P03PH 3 3,18 0,25 25,40
–
–
5345914
5291300
–
WMTS125I3P08PH 3 3,18 0,75 25,40
–
–
5345915
5331093
–
WMTS156I4P03PH 4 3,95 0,30 25,40
–
–
5345916
5345917
–
WMTS156I4P08PH 4 3,96 0,75 25,40
–
–
5345918
5345919
–
WMTS400M4P03PH 4 4,00 0,30 25,40
–
–
5346418
5346419
5346420
WMTS400M4P03PT 4 4,00 0,31 25,40
–
–
4113572
4113574
4113573
WMTS400M4P06PH 4 4,00 0,60 25,40
–
–
5346421
5346422
5346423
RR = RL
rst choice
alternate choice
Grooving and Cut-Off
(continued)
WID_Master16_Turning_Grooving&CutOff_E018_E019_Metric_REBRAND.indd 19 10/30/15 3:24 PM
E20
LViWID M 16 T i G i &C Off E020 E021 M i REBRANDO b 15 201510 34AM
widia.com
WMT™ Turning, Grooving, and Cut-Off
P
M
K
N
S
H
Grooving and Turning Inserts
RR = RL
rst choice
alternate choice
Grooving and Cut-Off
catalogue number
seat
size W RR LI
WP10CT
WP25CT
WU10PT
WU25PT
WU10HT
WMTS400M4P06PT 4 4,00 0,60 25,40
–
–
4113575
4113576
–
WMTS188I5P03PT 5 4,76 0,26 28,63
–
–
4118589
4118590
–
WMTS188I5P03PH 5 4,77 0,25 28,63
–
–
5345980
5331095
–
WMTS188I5P08PH 5 4,77 0,75 28,63
–
–
5345981
5331097
–
WMTS188I5P08PT 5 4,77 0,76 28,63
–
–
4118591
4118592
–
WMTS500M5P03PH 5 5,00 0,30 28,63
–
–
5346424
5346425
5346426
WMTS500M5P03PT 5 5,00 0,30 28,63
–
–
4116143
4116144
4116145
WMTS500M5P06PH 5 5,00 0,60 28,63
–
–
5346427
5346428
5346429
WMTS500M5P06PT 5 5,00 0,61 28,63
–
–
4116146
4116147
–
WMTS600M6P03PH 6 6,00 0,30 28,63
–
–
5346430
5346431
–
WMTS600M6P03PT 6 6,00 0,30 28,63
–
–
4117239
4117240
–
WMTS600M6P06PT 6 6,00 0,58 28,63
–
–
4117241
4117242
–
WMTS600M6P06PH 6 6,00 0,60 28,63
–
–
5346432
5346433
–
WMTS250I6P08PH 6 6,32 0,75 28,63
–
–
5345984
5327621
–
(continued)
(WMT-P-PT • Precision — continued)
WID_Master16_Turning_Grooving&CutOff_E020_E021_Metric_REBRAND.indd 20 10/30/15 3:24 PM
E21
LViWID M 16 T i G i &C Off E020 E021 M i REBRANDO b 15201510 34AM
widia.com
WMT™ Turning, Grooving, and Cut-Off
P
M
K
N
S
H
Grooving and Turning Inserts
rst choice
alternate choice
Grooving and Cut-Off
catalogue number
seat
size W RR LI
WP10CT
WP25CT
WU10PT
WU25PT
WU10HT
WMTS250I6P08PT 6 6,34 0,76 28,63
–
–
4118595
4118596
–
WMTS250I6P03PH 6 6,35 0,25 28,63
–
–
5345983
5327620
–
WMTS250I6P03PT 6 6,35 0,25 28,63
–
–
4118593
4118594
–
WMTS312I8P03PH 8 7,92 0,25 28,57
–
–
5345985
5345986
–
WMTS312I8P08PH 8 7,92 0,75 28,57
–
–
5345987
5345988
–
WMTS800M8P03PH 8 8,00 0,30 28,57
–
–
5346436
5346437
–
WMTS800M8P06PH 8 8,00 0,60 28,57
–
–
5346434
5346435
–
WMTS800M8P06PT 8 8,00 0,61 28,57
–
–
4117257
4117258
–
WMTS800M8P15PT 8 8,00 1,50 28,57
–
–
4117259
4117260
–
(WMT-P-PT • Precision — continued)
RR = RL
WID_Master16_Turning_Grooving&CutOff_E020_E021_Metric_REBRAND.indd 21 10/30/15 3:24 PM
E22
LViWID M 16 T i G i &C Off E022 E023 M i REBRANDO b 15 201510 34AM
widia.com
WMT™ Turning, Grooving, and Cut-Off
P
M
K
N
S
H
Grooving and Turning Inserts
WMT-U-PH • Moulded
catalogue number
seat
size W RR LI
WP10CT
WP25CT
WU10PT
WU25PT
WU10HT
WMTS305M3U03PH 3 3,05 0,30 25,81
–
–
5346392
5346393
–
WMTS305M3U06PH 3 3,05 0,60 25,81
–
–
5346394
5346395
–
WMTS405M4U03PH 4 4,05 0,30 25,53
–
–
5346396
5346397
–
WMTS405M4U06PH 4 4,05 0,60 25,53
–
–
5346398
5346399
–
WMTS505M5U03PH 5 5,05 0,30 28,76
–
–
5346400
5346401
–
WMTS505M5U06PH 5 5,05 0,60 28,76
–
–
5346402
5346403
–
WMTS605M6U03PH 6 6,05 0,30 28,76
–
–
5346404
5346405
–
WMTS605M6U06PH 6 6,05 0,60 28,76
–
–
5346406
5346407
–
WMTS805M8U03PH 8 8,05 0,30 28,70
–
–
5346410
5346411
–
WMTS805M8U06PH 8 8,05 0,60 28,70
–
–
5346408
5346409
–
Grooving and Cut-Off
RR = RL
rst choice
alternate choice
WID_Master16_Turning_Grooving&CutOff_E022_E023_Metric_REBRAND.indd 22 10/30/15 3:24 PM
E23
LViWID M 16 T i G i &C Off E022 E023 M i REBRANDO b 15201510 34AM
widia.com
WMT™ Turning, Grooving, and Cut-Off
P
M
K
N
S
H
Grooving and Turning Inserts
WMT-P-PH • Precision
catalogue number
seat
size W RR LI
WP10CT
WP25CT
WU10PT
WU25PT
WU10HT
WMTS300M3P03PH 3 3,00 0,30 25,65
–
–
5346412
5346413
5346414
WMTS300M3P06PH 3 3,00 0,60 25,65
–
–
5346415
5346416
5346417
WMTS125I3P03PH 3 3,18 0,25 25,40
–
–
5345914
5291300
–
WMTS125I3P08PH 3 3,18 0,75 25,40
–
–
5345915
5331093
–
WMTS156I4P03PH 4 3,95 0,30 25,40
–
–
5345916
5345917
–
WMTS156I4P08PH 4 3,96 0,75 25,40
–
–
5345918
5345919
–
WMTS400M4P03PH 4 4,00 0,30 25,40
–
–
5346418
5346419
5346420
WMTS400M4P06PH 4 4,00 0,60 25,40
–
–
5346421
5346422
5346423
WMTS188I5P03PH 5 4,77 0,25 28,63
–
–
5345980
5331095
–
WMTS188I5P08PH 5 4,77 0,75 28,63
–
–
5345981
5331097
–
RR = RL
rst choice
alternate choice
Grooving and Cut-Off
(continued)
WID_Master16_Turning_Grooving&CutOff_E022_E023_Metric_REBRAND.indd 23 10/30/15 3:24 PM
E24
LViWID M 16 T i G i &C Off E024 E025 M i REBRANDO b 15 201510 34AM
widia.com
WMT™ Turning, Grooving, and Cut-Off
P
M
K
N
S
H
Grooving and Turning Inserts
RR = RL
rst choice
alternate choice
catalogue number
seat
size W RR LI
WP10CT
WP25CT
WU10PT
WU25PT
WU10HT
WMTS500M5P03PH 5 5,00 0,30 28,63
–
–
5346424
5346425
5346426
WMTS500M5P06PH 5 5,00 0,60 28,63
–
–
5346427
5346428
5346429
WMTS600M6P03PH 6 6,00 0,30 28,63
–
–
5346430
5346431
–
WMTS600M6P06PH 6 6,00 0,60 28,63
–
–
5346432
5346433
–
WMTS250I6P08PH 6 6,32 0,75 28,63
–
–
5345984
5327621
–
WMTS250I6P03PH 6 6,35 0,25 28,63
–
–
5345983
5327620
–
WMTS312I8P03PH 8 7,92 0,25 28,57
–
–
5345985
5345986
–
WMTS312I8P08PH 8 7,92 0,75 28,57
–
–
5345987
5345988
–
WMTS800M8P03PH 8 8,00 0,30 28,57
–
–
5346436
5346437
–
WMTS800M8P06PH 8 8,00 0,60 28,57
–
–
5346434
5346435
–
Grooving and Cut-Off
(WMT-P-PH • Precision — continued)
WID_Master16_Turning_Grooving&CutOff_E024_E025_Metric_REBRAND.indd 24 10/30/15 3:24 PM
E25
LViWID M 16 T i G i &C Off E024 E025 M i REBRANDO b 15201510 34AM
widia.com
WMT™ Turning, Grooving, and Cut-Off
P
M
K
N
S
H
Plunge and Contour Inserts
WMT-U-PC • Moulded
catalogue number
seat
size W RC LI
WP10CT
WP25CT
WU10PT
WU25PT
WU10HT
WMTR305M3UPC 3 3,05 1,53 25,53
4170174
–
4170172
4170173
–
WMTR405M4UPC 4 4,05 2,03 25,58
4170179
–
4170177
4170178
–
WMTR505M5UPC 5 5,05 2,53 29,01
4170184
–
4170182
4170183
–
WMTR605M6UPC 6 6,05 3,03 28,77
4170189
–
4170187
4170188
–
WMTR805M8UPC 8 8,05 4,03 29,22
4170194
–
4170192
4170193
–
rst choice
alternate choice
Grooving and Cut-Off
WID_Master16_Turning_Grooving&CutOff_E024_E025_Metric_REBRAND.indd 25 10/30/15 3:24 PM
E26
LViWID M 16 T i G i &C Off E026 E027 M i REBRANDN b 11 20157 58AM
widia.com
WMT™ Turning, Grooving, and Cut-Off
P
M
K
N
S
H
Plunge and Contour Inserts
WMT-P-PC • Precision
catalogue number
seat
size W RC LI
WP10CT
WP25CT
WU10PT
WU25PT
WU10HT
WMTR300M3PPC 3 3,00 1,50 25,40
–
–
4170170
4170171
4170195
WMTR400M4PPC 4 4,00 2,00 25,45
–
–
4170175
4170176
4170196
WMTR188I5PPC 5 4,78 2,39 28,65
–
–
4170119
4170120
–
WMTR500M5PPC 5 5,00 2,50 28,88
–
–
4170180
4170181
–
WMTR600M6PPC 6 6,00 3,00 28,65
–
–
4170185
4170186
–
WMTR250I6PPC 6 6,36 3,18 29,01
–
–
4170121
4170122
–
WMTR312I8PPC 8 7,94 3,96 29,00
–
–
4170163
4170164
–
WMTR800M8PPC 8 8,00 4,00 29,08
–
–
4170190
4170191
–
Grooving and Cut-Off
rst choice
alternate choice
WID_Master16_Turning_Grooving&CutOff_E026_E027_Metric_REBRAND.indd 26 11/11/15 9:26 AM
LViWID M 16 T i G i &C Off E026 E027 M i REBRANDN b 1120157 58AMLViWID M 16 T i G i &C Off E026 E027 M i REBRANDN b 1120157 58AM
ADVISE
Uses a rules-based approach to provide cutting tool recommendations:
• Defi ne Machining Feature (face milling, slotting, blind hole, etc.)
• Apply Constraint Requirements (geometric, material, tolerance, etc.)
• Set Machining Sequence (single or multi-step operations, rough then
fi n i s h , e t c . )
• Receive Ranked Results
SELECT
A method of selecting cutting tools from a tree structure via a hierarchy
or parametric search:
• If you know which product you are looking for, a quick search can be
performed by just the catalogue number or product description.
• Smart fi lters signifi cantly reduce the amount of potential tooling
solutions.
• After the tool is selected, NOVO also provides cutting and adaptive
item options that fi t with your solution.
NOVO can ensure you have the right tools on your machines, in the right
sequence. Resulting in fl awless execution that accelerates every job,
and maximises every shift. widia.com/novo
NOVO KNOWS SEARCH
Searching for a tool by using the outdated method of a
catalogue has been replaced with the Advise and Select
functions from NOVO™ — saving you time and money.
WID_Master16_Turning_Grooving&CutOff_E026_E027_Metric_REBRAND.indd 27 11/11/15 9:26 AM
E28
LViWID M 16 T i G i &C Off E028 E029 M i REBRANDN b 11 20157 59AM
widia.com
WMT System
Our WMT toolholders now have a smart new naming system.
Here are some examples of the improved nomenclature for
our WMT Toolholders.
Integral Toolholders
Modular Blades
WMTBR2525M313038-052
WMTWGMR316B070-100
WMT™ System
Catalogue Numbering System
WMT B R 2525 M 3 13 — 038-052
Tooling
System
Tool Style Hand Shank Size Tool
Length
Seat
Size
Max
Grooving
Depth
Face Grooving
Diameter
WMT =
Groove
and Turn
(WMT
Insert)
S = Straight R= Right
hand
Height x Width
in mm
H = 100
J = 110
K = 125
L = 140
M = 150
P = 170
1
2
2B
3
4
5
6
8
CD max
in mm
Diameters are
min and max
for outer face
groove diameter
999 = unlimited
D max
C = Straight with
circular support
L= Left
hand
D min – D max
in mm
(e.g., 70–100 =
70mm D min
100 mm D max)
E= End mount
A= Straight, face grooving,
curve in
B= Straight, face grooving,
curve out
WMT WGM R 3 16 B 070-100
Tooling
System
Connection
Type
Hand Seat Size Max Grooving
Depth
Tool Style Face Grooving
Diameter
R= Right hand A= Curve In
L= Left hand B= Curve Out
WID_Master16_Turning_Grooving&CutOff_E028_E029_Metric_REBRAND.indd 28 11/11/15 9:26 AM
E29
LViWID M 16 T i G i &C Off E028 E029 M i REBRANDN b 1120157 59AM
widia.com
Modular Toolholders
WGMSR2525
WMT™ System
Catalogue Numbering System
WGM S R 2525
Tooling
System
Tool Style Hand Shank Size
MDG = Modular
Deep Grooving
S= Straight R= Right hand
E= End mount L= Left hand
WGM = Modular Serrated
Locking System
A25RWMTER0316M
Integral Boring Bars
A 25 R WMT E R 03 16 M
Steel
Bar with
Coolant
Bar Diameter Bar Length WMT™
Groove and
Turn System
Tool Style Hand Seat Size Max
Grooving
Depth
Tool Units
R= Right hand N= Inch
L= Left hand M= Metric
E= End mounted
(90º)
metric bars: inch bars:
R = 200mm R = 8"
S = 250mm S = 10"
T = 300mm T = 12"
pocket
seat size
cutting width
(mm)
02 2,00–2,62
2B 2,39–2,62
03 3,0–3,05
04 4,0–4,05
05 5,0–5,05
06 6,0–6,05
08 8,0–8,05
10 10,0–10,05
metric bars: inch bars:
Bar diameter in millimetres A two-digit number which
indicates the bar diameter
in 1/16" increments.
conversions:
mm inch
7mm .28"
10mm .39"
12mm .47"
16mm .63"
WID_Master16_Turning_Grooving&CutOff_E028_E029_Metric_REBRAND.indd 29 11/11/15 9:26 AM
E30
LViWID M 16 T i G i &C Off E030 E031 M i REBRANDO b 15 201510 36AM
widia.com
WMT™ Turning, Grooving, and Cut-Off
Integral Toolholders
O.D. Grooving and Cut-Off
order number catalogue number
seat
size W H B CD F H3 L1 LS
clamp
screw
clamp
screw
right hand
3650516 WMTSR2525M116 1 1,50 25,0 25,0 17 25,0 — 150 116 606249 —
3650456 WMTSR1616K216 2 2,00 16,0 16,0 17 16,0 6 125 101 606249 —
3650458 WMTSR2020K216 2 2,00 20,0 20,0 17 20,0 — 125 92 606249 —
3650506 WMTSR2525M216 2 2,00 25,0 25,0 17 25,0 — 150 116 606249 —
3539172 WMTSR1616K2B19 2B 2,38 16,0 16,0 24 15,9 5 125 88 — MS326
3539174 WMTSR2020K2B19 2B 2,38 20,0 20,0 24 19,9 5 125 88 — MS326
3539221 WMTCR2525M2B19 2B 2,38 25,0 25,0 24 24,9 — 150 113 — MS326
3650460 WMTSR1616K311 3 3,00 16,0 16,0 11 16,0 — 125 93 — 619205
3650462 WMTSR1616K322 3 3,00 16,0 16,0 22 16,0 5 125 85 — 619205
3650468 WMTSR2020K311 3 3,00 20,0 20,0 11 20,0 — 125 93 — 619205
3650470 WMTSR2020K322 3 3,00 20,0 20,0 22 20,0 5 125 85 — 619205
3650479 WMTSR2525M311 3 3,00 25,0 25,0 11 25,0 — 150 118 — 619205
3650481 WMTSR2525M322 3 3,00 25,0 25,0 22 25,0 — 150 110 — 619205
3650502 WMTSR1616411 4 4,00 16,0 16,0 11 16,0 — 125 92 — 619205
3650464 WMTSR1616K422 4 4,00 16,0 16,0 22 16,0 5 125 83 — 619205
3653751 WMTSR2020K20 4 4,00 20,0 20,0 22 20,0 5 125 83 — 619205
3650504 WMTSR2020K411 4 4,00 20,0 20,0 11 20,0 — 125 92 — 619205
3653752 WMTSR2525M11 4 4,00 25,0 25,0 11 25,0 — 150 117 — 619205
3650483 WMTSR2525M422 4 4,00 25,0 25,0 22 25,0 — 150 109 — 619205
3650466 WMTSR1616K514 5 5,00 16,0 16,0 14 16,0 — 125 88 — 619168
3650473 WMTSR2020K514 5 5,00 20,0 20,0 14 20,0 — 125 88 — 619168
3650475 WMTSR2020L525 5 5,00 20,0 20,0 15 20,0 5 140 93 — 619168
3650485 WMTSR2525M514 5 5,00 25,0 25,0 14 25,0 — 150 115 — 619168
3650487 WMTSR2525M525 5 5,00 25,0 25,0 25 25,0 — 150 104 — 619168
3650477 WMTSR2020L614 6 6,00 20,0 20,0 14 20,0 — 140 103 — 619168
3650489 WMTSR2525M614 6 6,00 25,0 25,0 14 25,0 — 150 114 — 619168
3650491 WMTSR2525M625 6 6,00 25,0 25,0 25 25,0 — 150 104 — 619168
3650494 WMTSR2525M814 8 8,00 25,0 25,0 14 25,0 — 150 113 — 619168
3650496 WMTSR2525M825 8 8,00 25,0 25,0 25 25,0 — 150 104 — 619168
3650498 WMTSR3232M814 8 8,00 32,0 32,0 14 32,0 — 150 113 — 619168
3650500 WMTSR3232M825 8 8,00 32,0 32,0 25 32,0 — 150 104 — 619168
Grooving and Cut-Off
Right Hand Tool
(continued)
WID_Master16_Turning_Grooving&CutOff_E030_E031_Metric_REBRAND.indd 30 10/30/15 3:25 PM
E31
LViWID M 16 T i G i &C Off E030 E031 M i REBRANDO b 15201510 36AM
widia.com
WMT™ Turning, Grooving, and Cut-Off
Integral Toolholders
order number catalogue number
seat
size W H B CD F H3 L1 LS
clamp
screw
clamp
screw
left hand
3653332 WMTSL2525M116 1 1,50 25,0 25,0 16 25,0 — 150 116 606249 —
3650457 WMTSL1616K216 2 2,00 16,0 16,0 17 16,0 6 125 101 606249 —
3650459 WMTSL2020K216 2 2,00 20,0 20,0 17 20,0 — 125 92 606249 —
3650507 WMTSL2525M216 2 2,00 25,0 25,0 17 25,0 — 150 116 606249 —
3539173 WMTSL1616K2B19 2B 2,38 16,0 16,0 24 15,9 5 125 88 — MS326
3539175 WMTSL2020K2B19 2B 2,38 20,0 20,0 24 19,9 5 125 88 — MS326
3650461 WMTSL1616K311 3 3,00 16,0 16,0 11 16,0 — 125 93 — 619205
3650463 WMTSL1616K322 3 3,00 16,0 16,0 22 16,0 5 125 85 — 619205
3650469 WMTSL2020K311 3 3,00 20,0 20,0 11 20,0 — 125 93 — 619205
3650471 WMTSL2020K322 3 3,00 20,0 20,0 22 20,0 5 125 85 — 619205
3650480 WMTSL2525M311 3 3,00 25,0 25,0 11 25,0 — 150 118 — 619205
3650482 WMTSL2525M322 3 3,00 25,0 25,0 22 25,0 — 150 110 — 619205
3650465 WMTSL1616K422 4 4,00 16,0 16,0 22 16,0 5 125 83 — 619205
3650472 WMTSL2020K22 4 4,00 20,0 20,0 22 20,0 5 125 83 — 619205
3650505 WMTSL2020K411 4 4,00 20,0 20,0 11 20,0 — 125 92 — 619205
3653763 WMTSL2525M11 4 4,00 25,0 25,0 11 25,0 — 150 117 — 619205
3650484 WMTSL2525M422 4 4,00 25,0 25,0 22 25,0 — 150 109 — 619205
3650467 WMTSL1616K514 5 5,00 16,0 16,0 14 16,0 — 125 88 — 619168
3650474 WMTSL2020K514 5 5,00 20,0 20,0 14 20,0 — 125 88 — 619168
3650486 WMTSL2525M514 5 5,00 25,0 25,0 14 25,0 — 150 113 — 619168
3650488 WMTSL2525M525 5 5,00 25,0 25,0 25 25,0 — 150 104 — 619168
3650478 WMTSL2020L614 6 6,00 20,0 20,0 14 20,0 — 140 103 — 619168
3650490 WMTSL2525M614 6 6,00 25,0 25,0 14 25,0 — 150 114 — 619168
3650493 WMTSL2525M625 6 6,00 25,0 25,0 25 25,0 — 150 104 — 619168
3650495 WMTSL2525M814 8 8,00 25,0 25,0 14 25,0 — 150 113 — 619168
3650497 WMTSL2525M825 8 8,00 25,0 25,0 25 25,0 — 150 104 — 619168
3650499 WMTSL3232M814 8 8,00 32,0 32,0 14 32,0 — 150 113 — 619168
3650501 WMTSL3232M825 8 8,00 32,0 32,0 25 32,0 — 150 104 — 619168
Grooving and Cut-Off
(O.D. Grooving and Cut-Off — continued)
WID_Master16_Turning_Grooving&CutOff_E030_E031_Metric_REBRAND.indd 31 10/30/15 3:25 PM
widia.com
E32
LViWID M 16 T i G i &C Off E032 E033 M i REBRANDN b 11 20151 49PM
WMT™ Turning, Grooving, and Cut-Off
Integral Toolholders for Swiss-Style Machines
Swiss Grooving and Cut-Off • Metric
NOTE: Insert exterior edge in line with toolholder edge for 10mm and 12mm shank toolholders.
Grooving and Cut-Off
Left Hand Tool
Insert Width Lead Angle
Old Manchester
Catalogue Number
Old Manchester
Grade
WMT
Cut-Off Insert
WMT
Insert Grade
WIDIA
™
Order Number
1,5mm Neutral 583-165 M443B WMTC015N00CM08 WU25PT 4169668
1,5mm Right - 5° 583-166 M443B WMTC015R05CM08 WU25PT 4169670
1,5mm Right - 12° 583-168 M443B WMTC015R12CM08 WU25PT 4169672
1,5mm Left - 5° 583-167 M443B WMTC015L05CM08 WU25PT 4169671
2,0mm Neutral 583-170 M443B WMTC020N00CM08 WU25PT 4169673
2,0mm Right - 5° 583-170 M443B WMTC020R05CM08 WU25PT 4169675
2,0mm Right - 12° 583-173 M443B WMTC020R12CM08 WU25PT 4169678
2,0mm Left - 5° 583-172 M443B WMTC020L05CM08 WU25PT 4169677
2,0mm Left - 12° 583-174 M443B WMTC020L12CM08 WU25PT 4169680
2,0mm Neutral - Groove 583-129 M45 / M43 WMTS200M2P02PT WU25PT 4116130
2,0mm Neutral 583-125 M45 / M43 WMTC020N00CMW08 WU25PT 4169674
2,0mm Right - 5° 583-126 M45 / M43 WMTC020R05CMW08 WU25PT 4169676
2,0mm Right - 12° 583-128 M45 / M43 WMTC020R12CMW08 WU25PT 4169679
2,0mm Left - 12° 583-129 M45 / M43 WMTC020L12CMW08 WU25PT 4169681
Update to our latest style cut-off inserts for use in the above style toolholders.
These holders can be used in many machines including Stars, Citizens, Tsugami, and Tonos/DECO.
order number catalogue number
seat
size W H B F D max H2 L1 L2
clamp
screw
right hand
3650508 WMTCR1010H110 1 1,50 10,0 10,0 10,0 20 16 100 21 606249
3650510 WMTCR1212H110 1 1,50 12,0 12,0 12,0 20 18 100 21 606249
3650512 WMTCR1616K113 1 1,50 16,0 15,9 16,0 26 24 125 24 606266
3650514 WMTCR2020K113 1 1,50 20,0 19,9 20,0 26 28 125 24 606266
3653413 WMTCR1010H210 2 2,00 10,0 10,0 10,0 20 16 100 21 606249
3653415 WMTCR1212H210 2 2,00 12,0 12,0 12,0 20 18 100 21 606249
3653417 WMTCR1616K213 2 2,00 16,0 15,8 16,0 26 24 125 24 606266
3653419 WMTCR2020K213 2 2,00 20,0 19,8 20,0 26 28 125 24 606266
3539170 WMTCR1212H2B16 2B 2,38 12,0 11,7 11,9 32 23 100 30 606249
left hand
3650509 WMTCL1010H110 1 1,50 10,0 10,0 10,0 20 16 100 21 606249
3650511 WMTCL1212H110 1 1,50 12,0 12,0 12,0 20 18 100 21 606249
3650513 WMTCL1616K113 1 1,50 16,0 15,9 16,0 26 24 125 24 606266
3650515 WMTCL2020K113 1 1,50 20,0 19,9 20,0 26 28 125 24 606266
3653414 WMTCL1010H210 2 2,00 10,0 10,0 10,0 20 16 100 21 606249
3653416 WMTCL1212H210 2 2,00 12,0 12,0 12,0 20 18 100 21 606249
3653418 WMTCL1616K213 2 2,00 16,0 15,8 16,0 26 24 125 24 606266
3653420 WMTCL2020K213 2 2,00 20,0 19,8 20,0 26 28 125 24 606266
3539171 WMTCL1212H2B16 2B 2,38 12,0 11,7 11,9 32 23 100 30 606249
WID_Master16_Turning_Grooving&CutOff_E032_E033_Metric_REBRAND.indd 32 11/11/15 5:34 PM
E33
LViWID M 16 T i G i &C Off E032 E033 M i REBRANDN b 1120151 49PM
widia.com
WMT™ Turning, Grooving, and Cut-Off
Integral Toolholders for Face Grooving
Curve Out
NOTE: Initial cut of tool must be between D min and D max. Due to the insert being positioned 0,75mm above centre, minimum diameter after initial cut is 12,6mm.
Toolholders that accept 3mm and 4mm width inserts have an integral clamp.
Toolholders that accept 5mm and 6mm width inserts are supplied with a detachable clamp.
order number catalogue number
seat
size W H B FS CD D max D min H2 L1 L2 clamp
clamp
screw
right hand
3653421 WMTBR2525M313-038-052 3 3,00 24,8 24,8 23,5 13 52 38 32 150 34 — 619205
3653423 WMTBR2525M316-052-070 3 3,00 24,8 24,8 23,5 16 70 52 32 150 34 — 619205
3653425 WMTBR2525M316-070-100 3 3,00 24,8 24,8 23,5 16 100 70 32 150 34 — 619205
3653427 WMTBR2525M319-100-205 3 3,00 25,0 24,8 23,5 19 205 100 32 150 37 — 619205
3653764 WMTBR2525M412-032-052 4 4,00 24,8 24,8 23,0 13 52 32 32 150 34 — 619205
3653766 WMTBR2525M415-052-070 4 4,00 24,8 24,8 23,0 16 70 52 32 150 34 — 619205
3653770 WMTBR2525M418-100-205 4 4,00 24,8 24,8 23,0 19 205 100 32 150 37 — 619205
3653431 WMTBR2525M519-052-070 5 5,00 24,8 24,8 22,5 19 70 52 34 150 38 446102 619168
3653433 WMTBR2525M519-070-100 5 5,00 24,8 24,8 22,5 19 100 70 34 150 42 446104 619168
3653435 WMTBR2525M525-100-205 5 5,00 24,8 24,8 22,5 25 205 100 34 150 42 446104 619168
3653437 WMTBR2525M616-038-052 6 6,00 24,8 24,8 22,0 16 52 38 35 150 38 446102 619168
3653441 WMTBR2525M619-070-100 6 6,00 24,8 24,8 22,0 19 100 70 36 150 42 446104 619168
3653443 WMTBR2525M625-100-205 6 6,00 24,8 24,8 22,0 25 205 100 34 150 42 446104 619168
left hand
3653422 WMTBL2525M313-038-052 3 3,00 24,8 24,8 23,5 13 52 38 32 150 34 — 619205
3653424 WMTBL2525M316-052-070 3 3,00 24,8 24,8 23,5 16 70 52 32 150 34 — 619205
3653426 WMTBL2525M316-070-100 3 3,00 24,8 24,8 23,5 16 100 70 32 150 34 — 619205
3653428 WMTBL2525M319-100-205 3 3,00 24,8 24,8 23,5 19 205 100 32 150 37 — 619205
3653765 WMTBL2525M412-032-052 4 4,00 24,8 24,8 23,0 13 52 32 32 150 34 — 619205
3653767 WMTBL2525M415-052-070 4 4,00 24,8 24,8 23,0 16 70 52 32 150 34 — 619205
3653769 WMTBL2525M415-070-100 4 4,00 24,8 24,8 23,0 16 100 70 32 150 34 — 619205
3653771 WMTBL2525M418-100-205 4 4,00 24,8 24,8 23,0 19 205 100 32 150 37 — 619205
3653432 WMTBL2525M519-052-070 5 5,00 24,8 24,8 22,5 19 70 52 34 150 38 446101 619168
3653434 WMTBL2525M519-070-100 5 5,00 24,8 24,8 22,5 19 100 70 34 150 42 446103 619168
3653436 WMTBL2525M525-100-205 5 5,00 24,8 24,8 22,5 25 205 100 34 150 42 446103 619168
3653438 WMTBL2525M616-038-052 6 6,00 24,8 24,8 22,0 16 52 38 35 150 38 446101 619168
3653444 WMTBL2525M625-100-205 6 6,00 24,8 24,8 22,0 25 205 100 34 150 42 446103 619168
Left Hand Tool
Grooving and Cut-Off
Blade
Style Part Shape Left Hand Right Hand
Curve
Out
WID_Master16_Turning_Grooving&CutOff_E032_E033_Metric_REBRAND.indd 33 11/11/15 5:34 PM
E34
LViWID M 16 T i G i &C Off E034 E035 M i REBRANDO b 15 201510 36AM
widia.com
WMT™ Turning, Grooving, and Cut-Off
Integral Toolholders for Face Grooving
Curve In
NOTE: Initial cut of tool must be between D min and D max. Due to the insert being positioned 0,75mm above centre, minimum diameter after initial cut is 12,6mm.
Toolholders that accept 3mm and 4mm width inserts have an integral clamp.
Toolholders that accept 5mm and 6mm width inserts are supplied with a detachable clamp.
order number catalogue number
seat
size W H B FS CD D max D min H2 L1 L2 clamp
clamp
screw
right hand
3634282 WMTAR2525M316-070-100 3 3,00 24,8 24,8 23,5 16 100 70 32 150 34 — MS326
3634284 WMTAR2525M319-100-205 3 3,00 24,8 24,8 23,5 19 205 100 32 150 37 — MS326
3634290 WMTAR2525M619-070-100 6 6,00 24,8 24,8 22,0 19 100 70 34 150 42 446104 619168
left hand
3634283 WMTAL2525M316-070-100 3 3,00 24,8 24,8 23,5 16 100 70 32 150 34 — MS326
3634285 WMTAL2525M319-100-205 3 3,00 24,8 24,8 23,5 19 205 100 32 150 37 — MS326
Grooving and Cut-Off
Left Hand Tool
Blade
Style Part Shape Left Hand Right Hand
Curve
In
WID_Master16_Turning_Grooving&CutOff_E034_E035_Metric_REBRAND.indd 34 10/30/15 3:25 PM
E35
LViWID M 16 T i G i &C Off E034 E035 M i REBRANDO b 15201510 36AM
widia.com
WMT™ Turning, Grooving, and Cut-Off
Integral I.D. Grooving Boring Bars
I.D. Boring Bars
order number catalogue number
insert
size W F CD D D min L1 A
clamp
screw hex
right hand
5423874 A25RWMTER0316M 3 3,00 26,0 16 25,00 41 200 6,40 619168 5 mm
5423875 A32SWMTER0319M 3 3,00 29,0 19 32,00 47 250 6,40 619168 5 mm
5423876 A25RWMTER0416M 4 4,00 26,0 16 25,00 41 200 6,40 619168 5 mm
5423877 A32SWMTER0419M 4 4,00 29,0 19 32,00 47 250 6,40 619168 5 mm
5423878 A32SWMTER0519M 5 5,00 29,0 19 32,00 47 250 6,40 619168 5 mm
5423879 A40TWMTER0522M 5 5,00 32,0 22 40,00 54 300 6,40 619168 5 mm
5423880 A32SWMTER0619M 6 6,00 29,0 19 32,00 47 250 6,40 619168 5 mm
5423881 A40TWMTER0622M 6 6,00 31,8 22 40,00 54 300 6,40 619168 5 mm
left hand
5423882 A25RWMTEL0316M 3 3,00 26,0 16 25,00 41 200 6,40 619168 5 mm
5423883 A32SWMTEL0319M 3 3,00 29,0 19 32,00 47 250 6,40 619168 5 mm
5423884 A25RWMTEL0416M 4 4,00 26,0 16 25,00 41 200 6,40 619168 5 mm
5423885 A32SWMTEL0419M 4 4,00 29,0 19 32,00 47 250 6,40 619168 5 mm
5423886 A32SWMTEL0519M 5 5,00 29,0 19 32,00 47 250 6,40 619168 5 mm
5423887 A40TWMTEL0522M 5 5,00 32,0 22 40,00 54 300 6,40 619168 5 mm
5423888 A32SWMTEL0619M 6 6,00 29,0 19 32,00 47 250 6,40 619168 5 mm
5423889 A40TWMTEL0622M 6 6,00 31,8 22 40,00 54 300 6,40 619168 5 mm
Grooving and Cut-Off
Steel shank with
through coolant.
Right Hand Tool
Right Hand Tool
WID_Master16_Turning_Grooving&CutOff_E034_E035_Metric_REBRAND.indd 35 10/30/15 3:25 PM
E36
LViWID M 16 T i G i &C Off E036 E037 M i REBRANDN b 11 20158 01AM
widia.com
WMT Modular Toolholders
Straight Mount • Grooving, Cut-Off, and Face Grooving
NOTE: Use the larger seat size toolholder for optimal performance.
order number catalogue number H B L1 LS F H3
blade
screw
Torx for
blade
screw
clamp
screw
Torx for
clamp
screw
right hand
5349628 WGMSR2020 20 20 108,0 68,00 8,84 12 MS2002 T25 MS1162 T25
5349629 WGMSR2525 25 25 126,0 95,78 13,84 7 MS2002 T25 MS1162 T25
5349641 WGMSR3232 32 32 126,0 69,85 20,81 — MS2002 T25 MS1162 T25
left hand
5349625 WGMSL1620 16 20 108,0 68,00 8,84 16 MS2002 T25 MS1162 T25
5349626 WGMSL2020 20 20 108,0 68,00 8,84 12 MS2002 T25 MS1162 T25
5349627 WGMSL2525 25 25 126,0 95,78 13,84 7 MS2002 T25 MS1162 T25
5349640 WGMSL3232 32 32 126,0 69,85 20,81 — MS2002 T25 MS1162 T25
Grooving and Cut-Off
Right Hand Tool
2 blade screws required
Toolholder Style Hand of Holder Hand of Blade
WGMS — Straight Mount Right Right
Left Left
WGME — End Mount Right Left
Left Right
Grooving and Cut-Off Blades
found on page E38.
Face Grooving Blades found on
page E39.
WMT™ Turning, Grooving, and Cut-Off
F Assy
CD Blade L1 Holder
L1 Assy
F
Holder
FS (Blade)
F Assy = F (Holder) + FS (Blade) + W/2
L1 Assy = L1 (Holder) + CD (Blade)
NOTE: Use the larger seat size toolholder for optimal performance.
Blade screws and clamp screw included with holder.
WID_Master16_Turning_Grooving&CutOff_E036_E037_Metric_REBRAND.indd 36 11/11/15 9:26 AM
E37
LViWID M 16 T i G i &C Off E036 E037 M i REBRANDN b 1120158 01AM
widia.com
WMT™ Turning, Grooving, and Cut-Off
WMT Modular Toolholders
End Mount • Grooving, Cut-Off, and Face Grooving
order number catalogue number H B L L1 LS F H3
right hand
5514979 WGMER2525 25 25 150,3 139,3 125,25 42,75 9
5515021 WGMER3232 32 32 170,3 159,3 145,25 42,75 —
left hand
5514978 WGMEL2525 25 25 150,3 139,3 125,25 42,75 9
5515020 WGMEL3232 32 32 170,3 159,3 145,25 42,75 —
Grooving and Cut-Off
Grooving and Cut-Off Blades
found on page E38.
Face Grooving Blades found on
page E39.
Toolholder Style Hand of Holder Hand of Blade
WGMS — Straight Mount Right Right
Left Left
WGME — End Mount Right Left
Left Right
Right Hand Tool
F Assy
F Holder
L1 Holder
L1 Assy
F Assy = F (Holder) + CD (Blade)
L1 Assy = L1 (Holder) + FS (Blade) + W/2
WID_Master16_Turning_Grooving&CutOff_E036_E037_Metric_REBRAND.indd 37 11/11/15 9:26 AM
E38
LViWID M 16 T i G i &C Off E038 E039 M i REBRANDO b 15 201510 37AM
widia.com
WMT™ Turning, Grooving, and Cut-Off
WMT Modular Toolholders
Grooving and Cut-Off
NOTE: Blade and clamp screw torque equals 8–10 Nm.
order number catalogue number
seat
size CD W FS W1
right hand
5359127 WMTWGMR114S 1 14,00 1,50 11,04 1,22
5359128 WMTWGMR213S 2 13,00 2,00 10,81 1,68
5359129 WMTWGMR2B16S 2B 16,50 2,39 10,71 1,88
5359130 WMTWGMR319S 3 19,00 3,00 10,38 2,54
5359131 WMTWGMR419S 4 19,00 4,00 10,00 3,30
5359132 WMTWGMR522S 5 22,00 5,00 9,82 3,66
5359133 WMTWGMR622S 6 22,00 6,00 9,26 4,78
left hand
5359120 WMTWGML114S 1 14,00 1,50 11,04 1,22
5359121 WMTWGML213S 2 13,00 2,00 10,81 1,68
5359122 WMTWGML2B16S 2B 16,50 2,39 10,71 1,88
5359123 WMTWGML319S 3 19,00 3,00 10,38 2,54
5359124 WMTWGML419S 4 19,00 4,00 10,00 3,30
5359125 WMTWGML522S 5 22,00 5,00 9,82 3,66
5359126 WMTWGML622S 6 22,00 6,00 9,26 4,78
Grooving and Cut-Off
Toolholder Style Hand of Holder Hand of Blade
WGMS — Straight Mount Right Right
Left Left
WGME — End Mount Right Left
Left Right
FS W W1
CD
Right Hand Blade
WID_Master16_Turning_Grooving&CutOff_E038_E039_Metric_REBRAND.indd 38 10/30/15 3:26 PM
E39
LViWID M 16 T i G i &C Off E038 E039 M i REBRANDO b 15201510 37AM
widia.com
WMT™ Turning, Grooving, and Cut-Off
WMT Modular Toolholders
Face Grooving
NOTE: Blade and clamp screw torque equals 8–10 Nm.
order number catalogue number
seat
size D min D max CD W FS
right hand
5359150 WMTWGMR313B038-052 3 38,00 52,00 12,70 3,00 11,00
5359151 WMTWGMR316B052-070 3 52,00 70,00 15,88 3,00 11,00
5359154 WMTWGMR416B052-070 4 52,00 70,00 15,88 4,00 10,50
5359152 WMTWGMR316B070-100 3 70,00 100,00 15,88 3,00 11,00
5359155 WMTWGMR416B070-100 4 70,00 100,00 15,88 4,00 10,50
5359153 WMTWGMR319B100-205 3 100,00 205,00 19,05 3,00 11,00
5359156 WMTWGMR419B100-205 4 100,00 205,00 19,05 4,00 10,50
5359157 WMTWGMR522B100-205 5 100,00 205,00 22,00 5,00 10,00
5359158 WMTWGMR622B100-205 6 100,00 205,00 22,00 6,00 10,00
left hand
5359146 WMTWGML616B030-052 6 30,00 52,00 15,88 6,00 10,00
5359134 WMTWGML313B038-052 3 38,00 52,00 12,70 3,00 11,00
5359138 WMTWGML413B038-052 4 38,00 52,00 12,70 4,00 10,50
5359142 WMTWGML516B038-052 5 38,00 52,00 15,88 5,00 10,00
5359135 WMTWGML316B052-070 3 52,00 70,00 15,88 3,00 11,00
5359139 WMTWGML416B052-070 4 52,00 70,00 15,88 4,00 10,50
5359143 WMTWGML519B052-070 5 52,00 70,00 19,05 5,00 10,00
5359147 WMTWGML619B052-070 6 52,00 70,00 19,05 6,00 10,00
5359136 WMTWGML316B070-100 3 70,00 100,00 15,88 3,00 11,00
5359140 WMTWGML416B070-100 4 70,00 100,00 15,88 4,00 10,50
5359144 WMTWGML519B070-100 5 70,00 100,00 19,05 5,00 10,00
5359148 WMTWGML619B070-100 6 70,00 100,00 19,05 6,00 10,00
5359137 WMTWGML319100-205 3 100,00 205,00 19,05 3,00 11,00
5359141 WMTWGML419B100-205 4 100,00 205,00 19,05 4,00 10,50
5359145 WMTWGML522B100-205 5 100,00 205,00 22,00 5,00 10,00
5359149 WMTWGML622B100-205 6 100,00 205,00 22,00 6,00 10,00
Grooving and Cut-Off
Toolholder Style Hand of Holder Hand of Blade
WGMS — Straight Mount Right Right
Left Left
WGME — End Mount Right Left
Left Right
Right Hand Tool
WID_Master16_Turning_Grooving&CutOff_E038_E039_Metric_REBRAND.indd 39 10/30/15 3:26 PM
E40 widia.com
Rigidity, Versatility, and Chip Control
• TopGroove clamping design features a rugged bridge clamp,
which locates in a groove moulded into the insert to provide
superior resistance to side and radial cutting forces.
• TopGroove inserts are available for shallow grooving, deep
grooving, light turning, profi ling, shallow and deep face
grooving, back turning, undercutting, and Poly-Vee grooving.
• The proprietary WIDIA chip control design works in multi-
directional turning as well as radial feed applications
to provide excellent chip evacuation in deep grooving
applications.
Rigid clamping generates locking forces in three directions
to hold inserts in place through the toughest cuts.
3.
1.
2.
WIDIA has set the industry standard for threading and grooving productivity with the TopGroove
clamping design. The TopGroove design provides consistent tool performance, accurate indexing,
and superior clamping to provide excellent surface fi nish and outstanding tool life.
Let us help you select the correct insert for your application needs or upgrade your current
TopGroove tooling inventory to include chip control geometries and the high productivity
grades available from WIDIA.
TopGroove
WIDIA™ TopGroove™ for Shallow
Grooving and Face Grooving
WID_Master16_Turning_Grooving&CutOff_E040_E041_Metric_REBRAND.indd 40 11/11/15 5:34 PM
LViWID M 16 T i G i &C Off E040 E041 M i REBRANDN b 1120151 09PM
E41
widia.com
Carbide Grades and Proven Solutions
for High Productivity
• The TopGroove system has a carbide grade to match
your application needs that include uncoated grades,
PVD-coated grades, CVD-coated grades, and advanced
material grades, including cermets, ceramics, PcBNs,
and PCDs (as custom solutions).
• PVD TiAIN-coated grades are designed to cut a variety
of workpiece materials.
• Versatile design enables one system to handle O.D. and I.D.
grooving, face grooving, back turning, undercutting, and
even threading operations.
TopGroove inserts employ
a unique top rake chip
control geometry that
effi ciently evacuates
chips and produces better
quality parts faster.
The WIDIA™ TopGroove™
clamping system offers a complete
line of grooving geometries and
an extensive grade selection.
WID_Master16_Turning_Grooving&CutOff_E040_E041_Metric_REBRAND.indd 41 11/11/15 5:34 PM
E42
LViWID M 16 T i G i &C Off E042 E043 M i REBRANDN b 12 201511 03AM
widia.com
1 Choose the application to be performed:
Groove depth, width, and pro le.
TopGroove is the best choice for groove depth-to-width ratios of 1.5 or less.
TopGroove™
Choosing the Correct TopGroove Cutter
Inside Diameter
(I.D.) Grooving
Outside Diameter
(O.D.) Grooving
Face Grooving
TopGroove
™
for Internal, External, and Face Grooving Applications
For deep grooving, use WMT
™
on page E4.
system capabilities minimum maximum
O.D./I.D. Grooving width 0,50mm 9,53mm
depth — 12,7mm
Face Grooving width 3,2mm 6,35mm
depth — 12,7mm
Internal Grooving diameter 11,2mm —
Face Grooving Diameter standard 23,9mm —
deep — —
Deep O.D./I.D. Grooving width 1,50mm 6,35mm
depth — 12,7mm
Deep Face Grooving width 3,18mm 6,35mm
depth — 12,7mm
The Most Advanced Turning Solutions in the Industry
What you need to know:
• Material being machined.
• Groove depth, width, and pro le.
• Application to be performed (face, O.D., or I.D. grooving).
• Toolholder requirements (e.g. KM
™
, ERICKSON
™
,
square shank, right/left).
Perfect for shallow grooving operations, the WIDIA
™
TopGroove clamping system
provides a complete line of grooving geometries and an extensive grade selection
to meet even the most demanding application requirements. For increased rigidity,
versatility, chip control, and carbide grade options, the TopGroove clamping system
is the proven solution.
With maximum clamping rigidity and superior versatility, TopGroove inserts employ a
unique top rake chip control geometry that ef ciently evacuates chips and produces
better quality parts, faster than ever before.
Utilise this comprehensive, easy-to-use guide for the information necessary to identify,
choose, and select the appropriate cutting tools for your speci c needs.
WID_Master16_Turning_Grooving&CutOff_E042_E043_Metric_REBRAND.indd 42 11/12/15 11:52 AM
E43
LViWID M 16 T i G i &C Off E042 E043 M i REBRANDN b 12201511 03AM
widia.com
2 Identify the material to be machined:
3 Select your toolholder based on the
application:
Each tool has a material grid marked with a letter
indicating the materials that can be machined.
A Choose the appropriate gage insert
(width) required for the application.
B Choose the shortest cutting depth “CD”
dimension for increased tool rigidity.
C Select the largest toolholder shank “H”
and “B” dimensions for maximum rigidity.
application
conventional
toolholders
modular
blades
O.D. Grooving and Plunge and Turn pages E74–E76 —
I.D. Grooving pages E78–E79 —
PSteel
MStainless Steel
KCast Iron
NNon-Ferrous
SHigh-Temp Alloys
HHardened Materials
TopGroove™
Choosing the Correct TopGroove Cutter
TopGroove™
Toolholders
n NS
order number catalogue number H B F L1 L2 B4 CD
gage
insert clamp
clamp
screw
clamp
screw
hex/
Torx
Plus
right hand
3641682 NSR1010E2 10,0 10,0 14,0 70 19 9 4 N.2R CM74 MS1200 — T10
3641660 NSR1212F2 12,0 12,0 16,0 80 19 9 4 N.2R CM74 MS1200 — T10
3636542 NSR1616H2 16,0 16,0 20,0 100 19 9 4 N.2R CM74 MS1200 — T10
3638589 NSR2020K2 20,0 20,0 25,0 125 19 9 4 N.2R CM74 MS1200 — T10
3638588 NSR2020K3 20,0 20,0 25,0 125 32 13 5 N.3R CM72LP — MS2111 25 IP
3638590 NSR2525M2 25,0 25,0 32,0 150 19 9 4 N.2R CM74 MS1200 — T10
3636536 NSR2525M3 25,0 25,0 32,0 150 32 13 5 N.3R CM72LP — MS2111 25 IP
3636540 NSR2525M4 25,0 25,0 32,0 150 35 14 7 N.4R CM72LP — MS2111 25 IP
3641664 NSR3225P3 32,0 25,0 32,0 170 32 13 5 N.3R CM72LP — MS2111 25 IP
3641675 NSR3225P4 32,0 25,0 32,0 170 35 14 7 N.4R CM72LP — MS2111 25 IP
3641666 NSR3232P3 32,0 32,0 40,0 170 32 13 5 N.3R CM72LP — MS2111 25 IP
3641669 NSR3232P4 32,0 32,0 40,0 170 35 14 7 N.4R CM72LP — MS2111 25 IP
left hand
3641683 NSL1010E2 10,0 10,0 14,0 70 19 9 4 N.2L CM75 MS1200 — T10
3641681 NSL1212F2 12,0 12,0 16,0 80 19 9 4 N.2L CM75 MS1200 — T10
3636545 NSL1616H2 16,0 16,0 20,0 100 19 9 4 N.2L CM75 MS1200 — T10
3639045 NSL2020K2 20,0 20,0 25,0 125 19 9 4 N.2L CM75 MS1200
—
T10
L2
L1
B
H
CD
B4
F
3°
A
B
C
B
C
WID_Master16_Turning_Grooving&CutOff_E042_E043_Metric_REBRAND.indd 43 11/12/15 11:52 AM
E44
LViWID M 16 T i G i &C Off E044 E045 M i REBRANDD b 9 20159 00AM
widia.com
4 Select chipbreaker style for the
application:
See application guide on page E48 for a
complete list of insert styles.
A Choose the appropriate insert width
“W” for your speci c application.
B Select the required corner
radius value “RR”.
NOTE: Chart shows recommended
starting feed rates.
See page E49.
TopGroove™
Choosing the Correct TopGroove Cutter
A B
WID_Master16_Turning_Grooving&CutOff_E044_E045_Metric_REBRAND.indd 44 12/9/15 9:01 AM
E45
LViWID M 16 T i G i &C Off E044 E045 M i REBRANDD b 920159 00AM
widia.com
Recommended Grades
cutting condition steel
stainless
steel cast iron
non-ferrous
metals
high-temp
alloys
hardened
materials
smooth cut, pre-turned surface TN7110 TN6010 TN7110 TN6010/
THM TN6010 TN6010
varying depth of cut, casting, or forging skin TN6010 TN6010 TN6010 TN6010/
THM TN6010 TN6010
lightly interrupted cut TN6025 TN6025 TN6025 TN6010/
THM TN6010 TN6025
heavily interrupted cut TN6025 TN6025 TN6025 TN6010/
THM TN6010 TN6025
5 Select grade:
6 Determine cutting data:
A Based on material group and grade,
identify starting speed (vc).
B First choice starting speed is in bold.
See page E47 for Grades and Grade Descriptions.
See page E50 for cutting data.
TopGroove™
Choosing the Correct TopGroove Cutter
A
B
WID_Master16_Turning_Grooving&CutOff_E044_E045_Metric_REBRAND.indd 45 12/9/15 9:01 AM
E46
LViWID M 16 T i G i &C Off E046 E047 M i REBRANDD b 9 20159 18AM
widia.com
TopGroove
Insert Identifi cation System
TopGroove™
Catalogue Numbering System
NGD2M150RK
back clearance
TopGroove/TopThread Threading and
Grooving Insert Dimensions
TopGroove/TopThread
Holder Design
NOTE: Holders are designed to locate insert inclined to
3° to provide back clearance down open side.
WIDIA
™
TopGroove and TopThread
™
tooling
technology combine to bring you the very best threading
and grooving system available in the world today.
insert size
SW1
mm inch mm Inch
1 2,54 .100 2,54 .100
2 5,56 .219 3,81 .150
3 8,74 .344 4,95 .195
4 11,51 .453 6,48 .255
5 17,48 .688 9,65 .380
6 11,51 .453 9,73 .383
8 7,93 .312 11,13 .438
Position pertains to groove width for F-, G-, and
U-style inserts, radii for R-style grooving inserts,
and circlip size for groove and chamfer inserts.
Dimension in 0,01mm.
Example: 3,25mm width groove or radius equals
“325” catalogue position number.
Width Tolerance: ±0,025mm unless otherwise
speci ed.
**Omit position for TopGroove NB-style blanks.
N G D 2 M 150 R K
Type
of Insert
Insert
Style
Additional
Information
Insert
Size
Size
Identifi cation
Groove
Size**
Hand
of Insert
Cutting
Depth
Chipbreaker
Design
Defi nition
of
Inserts
N —
TopGroove
D —
Deep
grooving
M —
Metric insert
groove width
L —
Left
hand
Shown for
groove and
chamfer
inserts in
0,01mm
increments.
K —
Standard
chip control
Groove size
J or L —
Poly-Vee
inserts
I — Internal
face grooving
P —
Positive C —
Circlip groove
insert width
is nominal
circlip size
R —
Right
hand
E —
Hone only
C —
Groove
and
chamfer
Blank —
Indicates inch
width insert
B — Blank
(for special forms)
F — Face grooving
G — Grooving
P — Back turning
R — Full radius
U — Undercutting
(or relieving)
V — Poly-Vee
insert
number
W1
mm
1 2,54
2 3,81
3 4,95
4 6,98
5 9,65
6 9,73
WID_Master16_Turning_Grooving&CutOff_E046_E047_Metric_REBRAND.indd 46 12/9/15 9:18 AM
E47
LViWID M 16 T i G i &C Off E046 E047 M i REBRANDD b 920159 18AM
widia.com
wear
resistance toughness
Coating Grade Description 05 10 15 20 25 30 35 40 45
TN6010
An advanced PVD TiAlN coating over a very deformation-resistant unalloyed carbide
substrate. TN6010 is ideal for nishing to general machining of most workpiece
materials at higher speeds. Excellent for machining most steels, stainless steels, cast
irons, non-ferrous materials, and super alloys under stable conditions. It also performs
well machining hardened and short chipping materials.
P
M
K
N
S
HC-S10 H
PSteel
MStainless Steel
KCast Iron
NNon-Ferrous
SHigh-Temp Alloys
HHardened Materials
Coatings provide high-speed
capability and are engineered
for fi nishing to heavy roughing.
TopGroove™
Grades and Grade Descriptions
TN6025
An advanced PVD TiAlN-coated grade with a tough, ultra- ne-grain unalloyed
substrate. For general-purpose machining of most steels, stainless steels,
high-temp alloys, titanium, irons, and non-ferrous materials. Speeds may vary
from low to medium and will handle interruptions and high feed rates.
P
M
K
N
S
HC-S25 H
Grade
THM
Uncoated carbide. Extraordinarily good balance of hardness, wear resistance, edge
stability, and toughness. Light and medium machining. For cast iron and all non-
ferrous metals and non-metals. Useful in unfavourable conditions.
P
M
K
N
S
HW-K15 H
TN7110
Coated carbide. MTCVD/CVD — TiN-TiCN-Al2O3-TiN. Very wear resistant. Light and
medium machining. For steels and nodular cast iron.
P
K
HC-P10
WID_Master16_Turning_Grooving&CutOff_E046_E047_Metric_REBRAND.indd 47 12/9/15 9:18 AM
E48
LViWID M 16 T i G i &C Off E048 E049 M i REBRANDO b 15 201510 38AM
widia.com
TopGroove™
Application Guide
insert
style application
rake
angle page(s)
NFD-KI*
• Internal deep face grooving
with chip control.
• For use in boring bars for
internal face grooves.
10°
positive —
NP-K
• Turning.
• Back turning positive.
• Proling with chip control.
10°
positive E66
NR
• Full radius grooving.
• Turning and proling. neutral E67–E69
NR-K
• Chip control geometry.
• Full radius grooving, turning,
and proling.
10°
positive E70
NRD
• Deep grooving.
• Full radius end-form. neutral E71
NRP*
• Full radius grooving.
• Light-turning proling.
5°
positive —
NU*
• Undercutting. neutral —
NV*
• Poly-Vee grooving. neutral —
NB/NBD
• Blanks.
• Blanks for deep grooving.
• Available in uncoated
grades only.
—E72
insert
style application
rake
angle page(s)
NG
• General-purpose grooving.
• O-ring grooving.
• Circlip grooving.
neutral E51–E52
NG-K
• Chip control geometry.
• General-purpose grooving.
• O-ring grooving.
• Circlip grooving.
• Light turning.
10°
positive E53–E59
NGC-K* • Combined groove and
chamfered edge break in
one positive plunge with
chip control.
• Designed for DIN 471/472
standard circlip grooves.
10°
positive —
NGD*
• Deep grooving. neutral —
NGD-K
• Chip control geometry.
• Deep grooving.
• Light turning.
10°
positive E60–E62
NGP
• General-purpose grooving.
• O-ring grooving.
• Circlip grooving.
5°
positive E63–E64
NF*
• Face grooving.
• Additional side clearance. neutral —
NF-K
• Face grooving with chip
control.
• Additional side clearance.
10°
positive E65
NFD-K
• Deep face grooving with
chip control.
• Additional side clearance.
10°
positive E66
*Inserts are available as custom solutions.
WID_Master16_Turning_Grooving&CutOff_E048_E049_Metric_REBRAND.indd 48 10/30/15 3:27 PM
E49
LViWID M 16 T i G i &C Off E048 E049 M i REBRANDO b 15201510 38AM
widia.com
TopGroove™
Feed Values for Grooving Inserts
TopGroove • NG -K, NG-1L, and NG
• Chip control enables true
optimisation and productivity.
• For general-purpose, O-ring,
and circlip grooving applications.
• Precision ground for accurate
edge location.
• Can be used in both toolholders
and boring bars.
NG-K NG
NG-1L
feed rate [mm]
width of cut [mm]
TopGroove • NGP and NGD-K
• Positive rake angles.
• For deep, O-ring, circlip, and general-
purpose grooving applications.
• Chip geometry for excellent chip control.
• Precision ground for accurate
edge location.
• Can be used in both toolholders
and boring bars.
NGP NGD-K
feed rate [mm]
width of cut [mm]
TopGroove • NR and NR-K
• For full radius grooving and
turning pro ling applications.
• Chip geometry for excellent
chip control.
• Precision ground for
accurate edge location.
• Can be used in both
toolholders and boring bars.
NR NR-K
feed rate [mm]
width of cut [mm]
1 Recommended Starting Feed
1 Recommended Starting Feed
1 Recommended Starting Feed
WID_Master16_Turning_Grooving&CutOff_E048_E049_Metric_REBRAND.indd 49 10/30/15 3:27 PM
widia.com
E50
LViWID M 16 T i G i &C Off E050 E051 M i REBRANDO b 15 201510 38AM
TopGroove™
Recommended Cutting Speeds • Metric
Material
Group
Cutting Speed — vc
m/min
TN6010 TN6025 TN7110 THM
min Start max min Start max min Start max min Start max
P
0/1
140
175
210 130
140
150 200
215
230 90
95
100
2
115
145
175 110
145
175 170
220
270 75
100
125
3
115
145
175 110
145
175 170
220
270 75
100
125
4
75
100
120 75
95
115 115
145
175 55
65
80
5
105
140
170 100
125
145 155
190
220 70
85
100
6
45
60
75 40
55
65 65
85
100 30
40
45
M
1
90
115
140 60
75
90 –
–
–60
75
90
2
55
70
90 40
50
55 –
–
–50
60
75
3
60
80
95 40
50
60 –
–
–40
50
55
K
1
120
150
180 60
80
90 175
220
275 70
90
100
2
120
150
180 60
75
85 165
215
265 50
65
80
3
110
140
170 60
75
90 180
230
280 60
70
80
N
1
600
750
900 600
750
900 –
–
– 600
750
900
2
535
685
835 535
685
835 –
–
– 500
650
800
3
230
300
370 230
300
370 –
–
– 600
750
900
4
135
180
225 135
180
225 –
–
– 500
650
800
5
70
90
110 70
90
110 –
–
– 230
300
370
6
445
565
690 445
565
690 –
–
– 150
200
250
7
550
700
850 550
700
850 –
–
– 150
200
250
S
1
35
40
50 25
35
40 –
–
–25
35
45
2
20
20
30 15
20
20 –
–
–20
30
35
3
60
70
80 40
60
70 –
–
–15
25
30
4
30
35
45 20
30
35 –
–
–10
15
20
H
1
15
30
60 15
30
60 –
–
–10
20
35
2
15
30
60 15
30
60 –
–
–10
20
35
3
15
30
60 15
30
60 –
–
–10
20
35
4
15
30
60 15
30
60 –
–
–10
20
35
WID_Master16_Turning_Grooving&CutOff_E050_E051_Metric_REBRAND.indd 50 10/30/15 3:27 PM
widia.com E51
LViWID M 16 T i G i &C Off E050 E051 M i REBRANDO b 15201510 38AM
TopGroove™
Grooving Inserts
NG • Grooving Inserts
catalogue number
insert
size W RR T
TN6010
TN6025
TN7110
THM
right hand
NG2031R 2 0,79 0,09 1,27
3607153
3607495
–
3607030
NG2041R 2 1,04 0,09 1,27
–
3607330
–
–
NG3047R 3 1,19 0,19 1,91
3607157
3607416
–
–
NG2058R 2 1,47 0,19 1,27
–
3607450
–
–
NG2062R 2 1,58 0,19 2,79
3607167
3607453
–
3607027
NG3062R 3 1,58 0,19 2,39
3607109
3607403
–
3607014
NG3094R 3 2,39 0,19 3,81
3607137
3607406
–
3607018
NG3125R 3 3,18 0,19 3,81
3607110
3607375
–
3607020
NG4250R 4 6,35 0,57 6,35
3607143
3607382
–
–
left hand
NG2031L 2 0,79 0,09 1,27
–
3607482
–
–
NG3047L 3 1,19 0,19 1,91
3607179
3607501
–
3607036
NG2058L 2 1,47 0,19 1,27
–
3607498
–
–
NG2062L 2 1,58 0,19 2,79
–
3607481
–
–
NG3062L 3 1,58 0,19 2,39
3607158
3607459
–
–
rst choice
alternate choice
(continued)
P
M
K
N
S
H
Grooving and Cut-Off
Right-hand insert shown; left-hand
insert is mirror image.
WID_Master16_Turning_Grooving&CutOff_E050_E051_Metric_REBRAND.indd 51 10/30/15 3:27 PM
E52
LViWID M 16 T i G i &C Off E052 E053 M i REBRANDO b 15 201510 38AM
widia.com
TopGroove™
Grooving Inserts
NG-1L • Grooving Inserts
catalogue number
insert
size W RR T
cutting
edges
TN6010
TN6025
TN7110
THM
left hand
NG1047L 1 1,19 0,19 1,91 1
–
3636571
–
–
NG1062L 1 1,58 0,19 1,91 1
–
3636569
–
–
NG1094L 1 2,39 0,19 1,91 1
–
3636570
–
–
NOTE: Width tolerance is +/– 0,076mm on NG-1L inserts.
Grooving and Cut-Off
catalogue number
insert
size W RR T
TN6010
TN6025
TN7110
THM
NG3094L 3 2,39 0,19 3,81
3607160
3607323
–
–
NG3125L 3 3,18 0,19 3,81
3607152
3607445
–
3607022
NG5M500L 5 5,00 0,32 9,52
–
3636572
–
–
NG4250L 4 6,35 0,57 6,35
3607175
3607513
–
–
P
M
K
N
S
H
rst choice
alternate choice
(NG • Grooving Inserts — continued)
Right-hand insert shown; left-hand
insert is mirror image.
WID_Master16_Turning_Grooving&CutOff_E052_E053_Metric_REBRAND.indd 52 10/30/15 3:27 PM
E53
LViWID M 16 T i G i &C Off E052 E053 M i REBRANDO b 15201510 38AM
widia.com
TopGroove™
Grooving Inserts
NG-K • Grooving Inserts with Chip Control
catalogue number
insert
size W Ap max RR T
TN6010
TN6025
TN7110
THM
right hand
NG2M050RK 2 0,50 0,64 0,09 0,64
3606991
3607394
–
–
NG2031RK 2 0,79 0,76 0,09 1,27
3607090
3607313
–
–
NG2M080RK 2 0,80 0,76 0,09 1,27
3606903
3607291
–
–
NG2M100RK 2 1,00 0,76 0,09 1,27
3607129
3607218
–
–
NG3M100RK 3 1,00 0,76 0,19 1,91
–
3607219
–
–
NG2047RK 2 1,19 0,76 0,09 1,27
3607123
3607404
–
–
NG3047RK 3 1,19 0,76 0,19 1,91
3607084
3607238
–
–
NG2M120RK 2 1,20 0,76 0,09 1,27
3606679
3607299
–
–
NG3M120RK 3 1,20 0,76 0,19 1,91
3606915
3607412
–
–
NG2M140RK 2 1,40 0,76 0,09 1,27
3607151
3607318
–
–
NG2M150RK 2 1,50 1,09 0,19 2,79
–
3607234
–
–
NG3M150RK 3 1,50 1,02 0,19 2,39
–
3607221
3607668
–
NG2062RK 2 1,58 1,09 0,19 2,79
3607089
3607215
–
–
NG3062RK 3 1,58 1,02 0,19 2,39
3607055
3607070
3607628
–
NG2M170RK 2 1,70 1,09 0,19 2,79
3606673
3607242
–
–
rst choice
alternate choice
Grooving and Cut-Off
(continued)
P
M
K
N
S
H
Right-hand insert shown; left-hand
insert is mirror image.
WID_Master16_Turning_Grooving&CutOff_E052_E053_Metric_REBRAND.indd 53 10/30/15 3:27 PM
E54
LViWID M 16 T i G i &C Off E054 E055 M i REBRANDO b 15 201510 39AM
widia.com
TopGroove™
P
M
K
N
S
H
Grooving Inserts
rst choice
alternate choice
Grooving and Cut-Off
catalogue number
insert
size W Ap max RR T
TN6010
TN6025
TN7110
THM
NG2M175RK 2 1,75 1,09 0,19 2,79
–
3607379
–
–
NG3M175RK 3 1,75 1,02 0,19 2,39
–
3607418
–
–
NG3072RK 3 1,83 1,02 0,19 2,39
3607145
3607332
–
–
NG2M195RK 2 1,95 1,09 0,19 2,79
3606829
3607417
–
–
NG3078RK 3 1,98 1,02 0,19 2,39
3607111
3607309
–
–
NG2M200RK 2 2,00 1,09 0,19 2,79
3607100
3607071
–
–
NG3M200RK 3 2,00 1,02 0,19 2,39
–
3607208
3607662
–
NG2M220RK 2 2,20 1,09 0,19 2,79
–
3607521
–
–
NG3M220RK 3 2,20 1,02 0,19 2,39
–
3607336
–
–
NG3M225RK 3 2,24 1,02 0,19 2,39
3606674
3607310
–
–
NG2M225RK 2 2,25 1,09 0,19 2,79
3606828
3607411
–
–
NG2094RK 2 2,39 1,09 0,19 2,79
3607146
3607317
–
–
NG3094RK 3 2,39 1,02 0,19 3,81
3606660
3607069
–
–
NG2M250RK 2 2,50 1,09 0,19 2,79
–
3607324
–
–
NG3M250RK 3 2,50 1,02 0,19 3,81
–
3607217
3607664
–
NG2M275RK 2 2,75 1,09 0,19 2,79
3606916
3607409
–
–
Right-hand insert shown; left-hand
insert is mirror image.
(NG-K • Grooving Inserts with Chip Control — continued)
(continued)
WID_Master16_Turning_Grooving&CutOff_E054_E055_Metric_REBRAND.indd 54 10/30/15 3:27 PM
E55
LViWID M 16 T i G i &C Off E054 E055 M i REBRANDO b 15201510 39AM
widia.com
TopGroove™
P
M
K
N
S
H
Grooving Inserts
rst choice
alternate choice
Grooving and Cut-Off
catalogue number
insert
size W Ap max RR T
TN6010
TN6025
TN7110
THM
NG3M275RK 3 2,75 1,02 0,19 3,81
3606677
3607337
–
–
NG2M300RK 2 3,00 1,09 0,19 2,79
3606676
3607340
–
–
NG3M300RK 3 3,00 1,02 0,19 3,81
3607138
3607072
3607655
–
NG4M300RK 4 3,00 1,02 0,19 3,81
–
3607388
–
–
NG2125RK 2 3,18 1,09 0,19 2,79
3607155
3607381
–
–
NG3125RK 3 3,18 1,02 0,19 3,81
3607057
3607068
–
–
NG4125RK 4 3,18 1,06 0,19 3,81
3607163
3607449
–
–
NG3M320RK 3 3,20 1,02 0,19 3,81
–
3607365
–
–
NG2M325RK 2 3,25 1,09 0,19 2,79
–
3607533
–
–
NG3M325RK 3 3,25 1,02 0,19 3,81
–
3607515
–
–
NG3M350RK 3 3,50 2,92 0,32 3,81
–
3607302
–
–
NG4M350RK 4 3,50 2,92 0,57 6,35
–
3607370
–
–
NG3156RK 3 3,96 2,92 0,19 3,81
3607127
3607456
–
–
NG3M400RK 3 3,99 2,92 0,32 3,81
3606678
3607235
–
–
NG4M400RK 4 4,00 2,92 0,57 6,35
3606908
3607364
–
–
NG3M425RK 3 4,24 2,92 0,32 3,81
3606914
3607517
–
–
Right-hand insert shown; left-hand
insert is mirror image.
(NG-K • Grooving Inserts with Chip Control — continued)
(continued)
WID_Master16_Turning_Grooving&CutOff_E054_E055_Metric_REBRAND.indd 55 10/30/15 3:27 PM
E56
LViWID M 16 T i G i &C Off E056 E057 M i REBRANDO b 15 201510 39AM
widia.com
TopGroove™
Grooving Inserts
rst choice
alternate choice
Grooving and Cut-Off
catalogue number
insert
size W Ap max RR T
TN6010
TN6025
TN7110
THM
NG3M450RK 3 4,50 2,92 0,32 3,81
–
3607362
–
–
NG4M450RK 4 4,50 2,92 0,57 6,35
–
3607390
–
–
NG3189RK 3 4,80 2,92 0,57 3,81
3607108
3607305
3607630
–
NG4189RK 4 4,80 2,92 0,57 6,35
3607103
3607220
–
–
NG4M500RK 4 5,00 2,92 0,32 6,35
3606830
3607447
–
–
NG4M550RK 4 5,50 3,81 0,57 6,35
–
3607383
–
–
NG4M600RK 4 6,00 3,81 0,57 6,35
–
3607385
–
–
NG4250RK 4 6,35 3,81 0,57 6,35
3607168
3607304
–
–
left hand
NG2M050LK 2 0,50 0,64 0,09 0,64
3606990
3607463
–
–
NG2031LK 2 0,79 0,76 0,09 1,27
3607112
3607443
–
–
NG2M080LK 2 0,80 0,76 0,09 1,27
3606911
3607534
–
–
NG2M100LK 2 1,00 0,76 0,09 1,27
3607159
3607239
–
–
NG3M100LK 3 1,00 0,76 0,19 1,91
–
3607419
–
–
NG2047LK 2 1,19 0,76 0,09 1,27
–
3607376
–
–
NG3047LK 3 1,19 0,76 0,19 1,91
3607105
3607374
–
–
Right-hand insert shown; left-hand
insert is mirror image.
(NG-K • Grooving Inserts with Chip Control — continued)
(continued)
P
M
K
N
S
H
WID_Master16_Turning_Grooving&CutOff_E056_E057_Metric_REBRAND.indd 56 10/30/15 3:27 PM
E57
LViWID M 16 T i G i &C Off E056 E057 M i REBRANDO b 15201510 39AM
widia.com
TopGroove™
Grooving Inserts
rst choice
alternate choice
Grooving and Cut-Off
catalogue number
insert
size W Ap max RR T
TN6010
TN6025
TN7110
THM
NG2M120LK 2 1,20 0,76 0,09 1,27
3606827
3607334
–
–
NG3M120LK 3 1,20 0,76 0,19 1,91
3606917
3607384
–
–
NG2M140LK 2 1,40 0,76 0,09 1,27
3606904
3607338
–
–
NG2M150LK 2 1,50 1,09 0,19 2,79
–
3607294
–
–
NG3M150LK 3 1,50 1,02 0,19 2,39
–
3607308
3607663
–
NG2062LK 2 1,58 1,09 0,19 2,79
3607126
3607307
–
–
NG3062LK 3 1,58 1,02 0,19 2,39
3607092
3607213
3607631
–
NG2M170LK 2 1,70 1,09 0,19 2,79
3606905
3607327
–
–
NG2M175LK 2 1,75 1,09 0,19 2,79
–
3607421
–
–
NG3M175LK 3 1,75 1,02 0,19 2,39
–
3607331
–
–
NG3072LK 3 1,83 1,02 0,19 2,39
3607184
3607454
–
–
NG2M195LK 2 1,95 1,09 0,19 2,79
3606910
3607420
–
–
NG3078LK 3 1,98 1,02 0,19 2,39
3607106
3607460
–
–
NG2M200LK 2 2,00 1,09 0,19 2,79
3607144
3607207
–
–
NG3M200LK 3 2,00 1,02 0,19 2,39
–
3607211
3607666
–
NG2M220LK 2 2,20 1,09 0,19 2,79
–
3607367
–
–
Right-hand insert shown; left-hand
insert is mirror image.
(NG-K • Grooving Inserts with Chip Control — continued)
(continued)
P
M
K
N
S
H
WID_Master16_Turning_Grooving&CutOff_E056_E057_Metric_REBRAND.indd 57 10/30/15 3:27 PM
E58
LViWID M 16 T i G i &C Off E058 E059 M i REBRANDN b 10 20152 00PM
widia.com
TopGroove™
P
M
K
N
S
H
Grooving Inserts
rst choice
alternate choice
Grooving and Cut-Off
catalogue number
insert
size W Ap max RR T
TN6010
TN6025
TN7110
THM
NG3M220LK 3 2,20 1,02 0,19 2,39
–
3607516
–
–
NG3M225LK 3 2,24 1,02 0,19 2,39
3606909
3607329
–
–
NG2M225LK 2 2,25 1,09 0,19 2,79
3606907
3607413
–
–
NG2094LK 2 2,39 1,09 0,19 2,79
3607149
3607380
–
–
NG3094LK 3 2,39 1,02 0,19 3,81
3607058
3607204
–
–
NG2M250LK 2 2,50 1,09 0,19 2,79
–
3607518
–
–
NG3M250LK 3 2,50 1,02 0,19 3,81
–
3607300
–
–
NG2M275LK 2 2,75 1,09 0,19 2,79
3606913
3607292
–
–
NG3M275LK 3 2,75 1,02 0,19 3,81
3606831
3607297
–
–
NG2M300LK 2 3,00 1,09 0,19 2,79
3606680
3607326
–
–
NG3M300LK 3 3,00 1,02 0,19 3,81
3606522
3607212
–
–
NG4M300LK 4 3,00 1,02 0,19 3,81
–
3607386
–
–
NG2125LK 2 3,18 1,09 0,19 2,79
3607165
3607444
–
–
NG3125LK 3 3,18 1,02 0,19 3,81
3607061
3607203
–
–
NG4125LK 4 3,18 1,06 0,19 3,81
3607183
3607448
–
–
NG3M320LK 3 3,20 1,02 0,19 3,81
–
3607372
–
–
(continued)
Right-hand insert shown; left-hand
insert is mirror image.
(NG-K • Grooving Inserts with Chip Control — continued)
WID_Master16_Turning_Grooving&CutOff_E058_E059_Metric_REBRAND.indd 58 11/11/15 9:26 AM
E59
LViWID M 16 T i G i &C Off E058 E059 M i REBRANDN b 1020152 00PM
widia.com
TopGroove™
P
M
K
N
S
H
Grooving Inserts
rst choice
alternate choice
Grooving and Cut-Off
catalogue number
insert
size W Ap max RR T
TN6010
TN6025
TN7110
THM
NG2M325LK 2 3,25 1,09 0,19 2,79
–
3607368
–
–
NG3M325LK 3 3,25 1,02 0,19 3,81
–
3607315
–
–
NG3M350LK 3 3,50 2,92 0,32 3,81
–
3607519
–
–
NG4M350LK 4 3,50 2,92 0,57 6,35
–
3607371
3607653
–
NG3156LK 3 3,96 2,92 0,19 3,81
3607177
3607335
–
–
NG3M400LK 3 3,99 2,92 0,32 3,81
3606906
3607237
3607656
–
NG4M400LK 4 4,00 2,92 0,57 6,35
3606912
3607363
–
–
NG3M425LK 3 4,24 2,92 0,32 3,81
3606918
3607520
–
–
NG3M450LK 3 4,50 2,92 0,32 3,81
–
3607369
–
–
NG4M450LK 4 4,50 2,92 0,57 6,35
–
3607389
–
–
NG3189LK 3 4,80 2,92 0,57 3,81
3607107
3607320
3607629
–
NG4189LK 4 4,80 2,92 0,57 6,35
3607140
3607377
–
–
NG4M500LK 4 5,00 2,92 0,32 6,34
3606832
3607522
–
–
NG4M550LK 4 5,50 3,81 0,57 6,35
–
3607366
–
–
NG4M600LK 4 6,00 3,81 0,57 6,35
–
3607387
–
–
NG4250LK 4 6,35 3,81 0,57 6,35
3607142
3607311
–
–
Right-hand insert shown; left-hand
insert is mirror image.
(NG-K • Grooving Inserts with Chip Control — continued)
WID_Master16_Turning_Grooving&CutOff_E058_E059_Metric_REBRAND.indd 59 11/11/15 9:26 AM
E60
LViWID M 16 T i G i &C Off E060 E061 M i REBRANDO b 15 201510 39AM
widia.com
TopGroove™
Grooving Inserts
NGD-K • Deep Grooving Inserts with Chip Control
catalogue number
insert
size W Ap max RR T
cutting
edges
TN6010
TN6025
TN7110
THM
right hand
NGD2M150RK 2 1,50 1,09 0,19 4,06 1
3606937
3607503
–
–
NGD3062RK 3 1,58 1,02 0,19 3,18 2
3607104
3607233
–
–
NGD2M200RK 2 2,00 1,09 0,19 5,08 1
3606938
3607465
–
–
NGD3M200RK 3 2,00 1,02 0,19 4,06 1
3606945
3607505
–
–
NGD3094RK 3 2,39 1,02 0,19 6,35 1
3607083
3607205
–
3607029
NGD2M250RK 2 2,50 1,09 0,19 5,08 1
3606939
3607504
–
–
NGD3M250RK 3 2,50 1,02 0,19 6,35 1
3606946
3607425
–
–
NGD3M300RK 3 3,00 1,02 0,19 6,35 1
3606922
3607426
–
–
NGD3125RK 3 3,18 1,02 0,19 6,35 1
3607088
3607210
–
–
NGD4125RK 4 3,18 1,02 0,19 6,35 2
3607133
3607312
–
–
NGD3M350RK 3 3,50 2,92 0,32 6,35 1
–
3607506
–
–
NGD3M400RK 3 4,00 2,92 0,32 6,35 1
3606940
3607427
–
–
NGD4M400RK 4 4,00 2,92 0,57 9,53 1
3606986
3607507
–
–
NGD4M450RK 4 4,50 2,92 0,57 12,70 1
–
3607508
–
–
NGD3189RK 3 4,80 2,92 0,57 6,35 1
3607170
3607373
–
–
rst choice
alternate choice
Right-hand insert shown; left-hand
insert is mirror image.
Grooving and Cut-Off
(continued)
P
M
K
N
S
H
WID_Master16_Turning_Grooving&CutOff_E060_E061_Metric_REBRAND.indd 60 10/30/15 3:27 PM
E61
LViWID M 16 T i G i &C Off E060 E061 M i REBRANDO b 15201510 39AM
widia.com
TopGroove™
Grooving Inserts
catalogue number
insert
size W Ap max RR T
cutting
edges
TN6010
TN6025
TN7110
THM
NGD4189RK 4 4,80 2,92 0,57 9,53 1
3607161
3607321
–
–
NGD4M500RK 4 5,00 2,92 0,57 12,70 1
3606988
3607509
–
–
NGD4M550RK 4 5,50 3,81 0,57 12,70 1
3606989
–
–
–
NGD4250RK 4 6,35 3,81 0,57 12,70 1
3607134
3607414
–
–
left hand
NGD2M150LK 2 1,50 1,09 0,19 4,06 1
3606935
3607402
–
–
NGD3062LK 3 1,58 1,02 0,19 3,18 2
3607098
3607451
–
–
NGD2M200LK 2 2,00 1,09 0,19 5,08 1
3606936
3607399
–
–
NGD3M200LK 3 2,00 1,02 0,19 4,06 1
3606941
3607487
–
–
NGD3094LK 3 2,39 1,02 0,19 6,34 1
3607096
3607240
–
3607035
NGD2M250LK 2 2,50 1,09 0,19 5,08 1
3606992
3607391
–
–
NGD3M250LK 3 2,50 1,02 0,19 6,35 1
3606942
3607423
–
–
NGD3M300LK 3 3,00 1,02 0,19 6,35 1
3606943
3607400
–
–
NGD3125LK 3 3,18 1,02 0,19 6,35 1
3607097
3607209
–
–
NGD4125LK 4 3,18 1,02 0,19 6,35 2
3607132
3607316
–
–
NGD3M350LK 3 3,50 2,92 0,32 6,35 1
–
3607488
–
–
rst choice
alternate choice
Right-hand insert shown; left-hand
insert is mirror image.
Grooving and Cut-Off
(NGD-K • Deep Grooving Inserts with Chip Control — continued)
(continued)
P
M
K
N
S
H
WID_Master16_Turning_Grooving&CutOff_E060_E061_Metric_REBRAND.indd 61 10/30/15 3:27 PM
E62
LViWID M 16 T i G i &C Off E062 E063 M i REBRANDO b 15 201510 40AM
widia.com
TopGroove™
Grooving Inserts
rst choice
alternate choice
catalogue number
insert
size W Ap max RR T
cutting
edges
TN6010
TN6025
TN7110
THM
NGD3M400LK 3 4,00 2,92 0,32 6,35 1
3606921
3607424
–
–
NGD4M400LK 4 4,00 2,92 0,57 9,53 1
3606923
3607489
–
–
NGD4M450LK 4 4,50 2,92 0,57 12,70 1
–
3607490
–
–
NGD3189LK 3 4,80 2,92 0,57 6,35 1
3607148
3607410
–
–
NGD4189LK 4 4,80 2,92 0,57 9,53 1
3607147
3607314
–
–
NGD4M500LK 4 5,00 2,92 0,57 12,70 1
–
3607491
–
–
NGD4M550LK 4 5,50 3,81 0,57 12,70 1
–
3607492
–
–
NGD4250LK 4 6,35 3,80 0,57 12,70 1
3607178
3607422
–
–
Grooving and Cut-Off
P
M
K
N
S
H
Right-hand insert shown; left-hand
insert is mirror image.
(NGD-K • Deep Grooving Inserts with Chip Control — continued)
WID_Master16_Turning_Grooving&CutOff_E062_E063_Metric_REBRAND.indd 62 10/30/15 3:27 PM
E63
LViWID M 16 T i G i &C Off E062 E063 M i REBRANDO b 15201510 40AM
widia.com
TopGroove™
Grooving Inserts
NGP • Grooving Positive Rake Inserts
catalogue number
insert
size W RR T
TN6010
TN6025
TN7110
THM
right hand
NGP2M150R 2 1,50 0,19 2,79
3606975
–
–
3607045
NGP3M150R 3 1,50 0,19 1,90
3606979
–
–
3607049
NGP2062R 2 1,58 0,19 2,79
3607128
–
–
–
NGP2M200R 2 2,00 0,19 2,79
3606976
–
–
3607046
NGP3M200R 3 2,00 0,19 2,79
3606980
–
–
3607050
NGP2M250R 2 2,50 0,19 2,79
3606977
–
–
3607047
NGP3M250R 3 2,50 0,19 3,81
3606981
–
–
3607051
NGP2M300R 2 3,00 0,19 2,79
3606978
–
–
3607048
NGP3M300R 3 3,00 0,19 3,81
–
–
–
3607052
Grooving and Cut-Off
rst choice
alternate choice
(continued)
P
M
K
N
S
H
Right-hand insert shown; left-hand
insert is mirror image.
WID_Master16_Turning_Grooving&CutOff_E062_E063_Metric_REBRAND.indd 63 10/30/15 3:28 PM
E64
LViWID M 16 T i G i &C Off E064 E065 M i REBRANDO b 15 201510 40AM
widia.com
TopGroove™
Grooving Inserts
catalogue number
insert
size W RR T
TN6010
TN6025
TN7110
THM
left hand
NGP2M150L 2 1,50 0,19 2,79
3606967
–
–
3607037
NGP3M150L 3 1,50 0,19 1,90
3606971
–
–
3607041
NGP2062L 2 1,57 0,19 2,79
3607182
–
–
–
NGP2M200L 2 2,00 0,19 2,79
3606968
–
–
3607038
NGP3M200L 3 2,00 0,19 2,79
3606972
–
–
3607042
NGP2M250L 2 2,50 0,19 2,79
3606969
–
–
3607039
NGP3M250L 3 2,50 0,19 3,81
3606973
–
–
3607043
NGP2M300L 2 3,00 0,19 2,79
–
–
–
3607040
NGP3M300L 3 3,00 0,19 3,81
3606974
–
–
3607044
Grooving and Cut-Off
rst choice
alternate choice
(NGP • Grooving Positive Rake Inserts — continued) P
M
K
N
S
H
Right-hand insert shown; left-hand
insert is mirror image.
WID_Master16_Turning_Grooving&CutOff_E064_E065_Metric_REBRAND.indd 64 10/30/15 3:28 PM
E65
LViWID M 16 T i G i &C Off E064 E065 M i REBRANDO b 15201510 40AM
widia.com
TopGroove™
Grooving Inserts
NF-K • Face Grooving Positive Rake Inserts
catalogue number
insert
size W Ap max RR T
TN6010
TN6025
TN7110
THM
right hand
NF3M200RK 3 2,00 1,02 0,19 1,78
–
3607511
–
–
NF3M300RK 3 3,00 1,02 0,19 3,81
–
3607512
–
–
NF3125RK 3 3,18 1,02 0,19 3,81
–
3607241
–
–
left hand
NF3M200LK 3 2,00 1,02 0,19 1,78
–
3607428
–
–
NF3M300LK 3 3,00 1,02 0,19 3,81
–
3607429
–
–
NF3125LK 3 3,18 1,02 0,19 3,81
–
3607322
–
–
NF3156LK 3 3,96 2,92 0,19 3,81
–
3607333
–
–
Right-hand insert shown; left-hand
insert is mirror image.
Grooving and Cut-Off
rst choice
alternate choice
P
M
K
N
S
H
WID_Master16_Turning_Grooving&CutOff_E064_E065_Metric_REBRAND.indd 65 10/30/15 3:28 PM
E66
LViWID M 16 T i G i &C Off E066 E067 M i REBRANDO b 15 201510 40AM
widia.com
Grooving and Cut-Off
TopGroove™
Grooving Inserts
NFD-K • Face Grooving Deep-Grooving Inserts
catalogue number
insert
size W Ap max RR T
cutting
edges
TN6010
TN6025
TN7110
THM
right hand
NFD3M300RK 3 3,00 1,02 0,19 6,35 1
–
3607523
–
–
NFD3125RK 3 3,18 1,02 0,19 6,35 1
–
3607296
–
–
NFD4189RK 4 4,80 2,92 0,57 9,53 1
–
3607325
–
–
NFD4250RK 4 6,35 3,81 0,57 12,70 1
–
3607378
–
–
left hand
NFD3M300LK 3 3,00 1,02 0,19 6,35 1
–
3607464
–
–
NFD3125LK 3 3,18 1,02 0,19 6,35 1
–
3607293
–
–
NFD4189LK 4 4,80 2,92 0,57 9,53 1
–
3607415
–
–
Right-hand insert shown; left-hand
insert is mirror image.
rst choice
alternate choice
NP-K • Profiling Inserts
catalogue number
insert
size W RL T
TN6010
TN6025
TN7110
THM
right hand
NP2002RK 2 3,68 0,25 2,79
3607136
3607477
–
–
NP3002RK 3 4,83 0,25 5,08
3607154
3607493
–
–
NP3012RK 3 4,83 0,25 5,08
–
3607328
–
–
NOTE: Width tolerance is +/- 0,13mm.
Right-hand insert shown; left-hand
insert is mirror image.
P
M
K
N
S
H
WID_Master16_Turning_Grooving&CutOff_E066_E067_Metric_REBRAND.indd 66 10/30/15 3:28 PM
E67
LViWID M 16 T i G i &C Off E066 E067 M i REBRANDO b 15201510 40AM
widia.com
TopGroove™
Grooving Inserts
NR • Full Radius Inserts
catalogue number
insert
size W RC T
TN6010
TN6025
TN7110
THM
right hand
NR2M050R 2 1,00 0,50 1,27
3606957
3607393
–
–
NR2M075R 2 1,50 0,75 2,79
3606929
3607469
–
–
NR2031R 2 1,58 0,79 2,79
3607174
3607301
–
–
NR3031R 3 1,58 0,79 2,39
3607125
3607475
–
3607015
NR2M100R 2 2,00 1,00 2,79
3606930
3607470
–
–
NR3M100R 3 2,00 1,00 2,39
3606958
3607397
–
–
NR2047R 2 2,39 1,19 2,79
–
3607494
–
–
NR3047R 3 2,39 1,19 3,81
3607093
3607502
–
3607031
NR2M125R 2 2,50 1,25 2,79
3606931
3607471
–
–
NR3M125R 3 2,50 1,25 3,81
3606959
3607439
–
–
NR2M150R 2 3,00 1,50 2,79
3606932
3607472
–
–
NR3M150R 3 3,00 1,50 3,81
3606960
3607440
–
–
NR3062R 3 3,18 1,59 3,81
3607131
3607473
–
3607026
NR2M175R 2 3,50 1,75 2,79
3606933
3607483
–
–
NR3M175R 3 3,50 1,75 3,81
3606961
3607441
–
–
rst choice
alternate choice
Right-hand insert shown; left-hand
insert is mirror image.
Grooving and Cut-Off
(continued)
P
M
K
N
S
H
WID_Master16_Turning_Grooving&CutOff_E066_E067_Metric_REBRAND.indd 67 10/30/15 3:28 PM
E68
LViWID M 16 T i G i &C Off E068 E069 M i REBRANDO b 15 201510 40AM
widia.com
TopGroove™
Grooving Inserts
rst choice
alternate choice
catalogue number
insert
size W RC T
TN6010
TN6025
TN7110
THM
NR3M200R 3 4,00 2,00 3,81
3606962
3607398
–
–
NR4M200R 4 4,00 2,00 6,35
3606964
3607484
–
–
NR3M225R 3 4,50 2,25 3,81
3606963
3607442
–
–
NR4M225R 4 4,50 2,25 6,35
3606965
3607485
–
–
NR3094R 3 4,78 2,39 3,81
3607180
3607476
–
–
NR4M250R 4 5,00 2,50 6,35
3606966
3607486
–
–
NR4125R 4 6,35 3,18 6,35
3607130
3607500
–
–
left hand
NR2M050L 2 1,00 0,50 1,27
3606948
3607401
3607672
–
NR2M075L 2 1,50 0,75 2,79
3606924
3607430
–
–
NR2031L 2 1,58 0,79 2,79
3607176
3607319
–
–
NR3031L 3 1,58 0,79 2,39
3607139
3607478
–
3607034
NR2M100L 2 2,00 1,00 2,79
3606925
3607431
3607684
–
NR3M100L 3 2,00 1,00 2,39
3606949
3607395
–
–
NR2047L 2 2,39 1,19 2,79
–
3607446
–
–
NR3047L 3 2,39 1,19 3,81
3607135
3607479
–
3607028
Right-hand insert shown; left-hand
insert is mirror image.
Grooving and Cut-Off
(NR • Full Radius Inserts — continued)
(continued)
P
M
K
N
S
H
WID_Master16_Turning_Grooving&CutOff_E068_E069_Metric_REBRAND.indd 68 10/30/15 3:28 PM
E69
LViWID M 16 T i G i &C Off E068 E069 M i REBRANDO b 15201510 40AM
widia.com
TopGroove™
P
M
K
N
S
H
Grooving Inserts
rst choice
alternate choice
Right-hand insert shown; left-hand
insert is mirror image.
Grooving and Cut-Off
catalogue number
insert
size W RC T
TN6010
TN6025
TN7110
THM
NR2M125L 2 2,50 1,25 2,79
3606926
3607432
–
–
NR3M125L 3 2,50 1,25 3,81
3606950
3607435
3607689
–
NR2M150L 2 3,00 1,50 2,79
3606927
3607433
–
–
NR3M150L 3 3,00 1,50 3,81
3606951
3607436
–
–
NR3062L 3 3,18 1,59 3,81
3607171
3607497
–
3607032
NR2M175L 2 3,50 1,75 2,79
3606928
3607434
–
–
NR3M175L 3 3,50 1,75 3,81
3606952
3607437
3607691
–
NR3M200L 3 4,00 2,00 3,81
3606953
3607396
–
–
NR4M200L 4 4,00 2,00 6,35
3606954
3607466
–
–
NR3M225L 3 4,50 2,25 3,81
3606934
3607438
–
–
NR4M225L 4 4,50 2,25 6,35
3606955
3607467
–
–
NR3094L 3 4,78 2,39 3,81
3607169
3607339
–
–
NR4M250L 4 5,00 2,50 6,35
3606956
3607468
–
–
NR4125L 4 6,35 3,18 6,35
3607181
3607514
–
–
(NR • Full Radius Inserts — continued)
WID_Master16_Turning_Grooving&CutOff_E068_E069_Metric_REBRAND.indd 69 10/30/15 3:28 PM
E70
LViWID M 16 T i G i &C Off E070 E071 M i REBRANDO b 15 201510 41AM
widia.com
TopGroove™
Grooving Inserts
NR-K • Full Radius Inserts with Chip Control
catalogue number
insert
size W Ap max RC T
TN6010
TN6025
TN7110
THM
right hand
NR3031RK 3 1,57 1,97 0,79 2,39
3607062
3607206
–
–
NR3047RK 3 2,39 1,91 1,19 3,81
3607086
3607214
–
–
NR3062RK 3 3,18 2,92 1,59 3,81
3607056
3607236
–
–
NR4062RK 4 3,18 2,92 1,59 3,81
–
3607461
–
–
NR3078RK 3 3,96 2,54 1,98 3,81
3607094
3607407
–
–
NR4094RK 4 4,78 3,81 2,39 6,35
3607101
3607480
–
–
NR4125RK 4 6,35 3,81 3,18 6,35
3607141
3607303
–
–
left hand
NR3031LK 3 1,58 1,98 0,79 2,39
3607095
3607222
–
–
NR3047LK 3 2,39 1,91 1,19 3,81
3607102
3607408
–
–
NR3062LK 3 3,18 2,92 1,59 3,81
3607091
3607216
–
–
NR4062LK 4 3,18 2,92 1,59 3,81
3607156
3607405
–
–
NR3078LK 3 3,96 2,54 1,98 3,81
3607172
3607306
–
–
NR4094LK 4 4,78 3,81 2,39 6,35
3607150
3607452
–
–
NR4125LK 4 6,35 3,81 3,18 6,35
3607166
3607458
–
–
Right-hand insert shown; left-hand
insert is mirror image.
Grooving and Cut-Off
rst choice
alternate choice
P
M
K
N
S
H
WID_Master16_Turning_Grooving&CutOff_E070_E071_Metric_REBRAND.indd 70 10/30/15 3:28 PM
E71
LViWID M 16 T i G i &C Off E070 E071 M i REBRANDO b 15201510 41AM
widia.com
TopGroove™
Grooving Inserts
NRD • Full Radius Deep-Grooving Inserts
catalogue number
insert
size W T
cutting
edges
TN6010
TN6025
TN7110
THM
right hand
NRD3031R 3 1,58 3,18 2
3607087
3607457
–
–
NRD3062R 3 3,18 6,35 1
3607099
3607474
–
–
NRD4062R 4 3,18 6,35 2
3607173
3607499
–
–
NRD4125R 4 6,35 12,70 1
–
3607496
–
–
left hand
NRD3031L 3 1,58 3,18 2
3607085
3607455
–
–
NRD3062L 3 3,18 6,35 1
3607124
3607462
–
–
NRD4062L 4 3,18 6,35 2
3607162
3607295
–
–
NRD4125L 4 6,35 12,70 1
3607186
3607298
–
–
rst choice
alternate choice
Right-hand insert shown; left-hand
insert is mirror image.
Grooving and Cut-Off
P
M
K
N
S
H
WID_Master16_Turning_Grooving&CutOff_E070_E071_Metric_REBRAND.indd 71 10/30/15 3:28 PM
E72
LViWID M 16 T i G i &C Off E072 E073 M i REBRANDN b 11 20151 34PM
widia.com
TopGroove™
Grooving Inserts
NB • Blanks
catalogue number
insert
size W
TN6010
TN6025
TN7110
THM
right hand
NB2R 2 3,81
–
–
–
3607064
NB3R 3 4,95
–
–
–
3607019
left hand
NB2L 2 3,81
–
–
–
3607016
NB3L 3 4,95
–
–
–
3607017
NOTE: NB blanks are designed to allow modification of the W dimension and end form.
W dimension is provided to indicate maximum possible width.
Available in uncoated grades only.
Grooving and Cut-Off
rst choice
alternate choice
P
M
K
N
S
H
Right-hand insert shown; left-hand
insert is mirror image.
WID_Master16_Turning_Grooving&CutOff_E072_E073_Metric_REBRAND.indd 72 11/11/15 5:34 PM
E73
LViWID M 16 T i G i &C Off E072 E073 M i REBRANDN b 1120151 34PM
widia.com
TopGroove™
Holder Identifi cation System
NSR2525M4
TopGroove™
Catalogue Numbering System
L1 ISO
32 A
40 B
50 C
60 D
70 E
80 F
90 G
100 H
110 I
125 J
140 K
150 L
160 M
170 N
180 P
200 Q
250 R
300 S
350 T
400 U
450 V
500 W
Special
Length
Y
X
insert
size W1
2 3,81mm
3 4,95mm
4 6,98mm
5 9,65mm
6 9,73mm
8 11,13mm
DH
R
R
L
L
S
AS
E
W1
DH = Drop Head
back clearance
N S R 2525 M 4
Insert
Holding
Method
Insert
Mounting
Location
Hand
of Tool
Drop
Head
Shank
Size
Tool Length Insert
Size
Qualifi ed
Surface and
Length
N —
TopGroove*
End mount Shank height
and width in mm
and holder length
according to ISO
standard.
Side mount
Offset
*Proprietary
standard only.
Side mount
No offset
for swiss
machining
NRR undercut End mount
Q —
quali ed metric holder
Side mount
NOTE: Holders are designed to locate
insert inclined to 3° to provide back
clearance down open side.
E
S
AS
DH
R
R
L
L
WID_Master16_Turning_Grooving&CutOff_E072_E073_Metric_REBRAND.indd 73 11/11/15 5:34 PM
E74
LViWID M 16 T i G i &C Off E074 E075 M i REBRANDO b 15 201510 41AM
widia.com
TopGroove™
Toolholders
NS
NOTE: F dimension measured over sharp point of insert.
order number catalogue number H B F L1 L2 B4 CD
gage
insert clamp
clamp
screw
clamp
screw
hex/
Torx
Plus
right hand
3641682 NSR1010E2 10,0 10,0 14,0 70 19 9 4 N.2R CM74 MS1200 — T10
3641660 NSR1212F2 12,0 12,0 16,0 80 19 9 4 N.2R CM74 MS1200 — T10
3636542 NSR1616H2 16,0 16,0 20,0 100 19 9 4 N.2R CM74 MS1200 — T10
3638589 NSR2020K2 20,0 20,0 25,0 125 19 9 4 N.2R CM74 MS1200 — T10
3638588 NSR2020K3 20,0 20,0 25,0 125 32 13 5 N.3R CM72LP — MS2111 25 IP
3638590 NSR2525M2 25,0 25,0 32,0 150 19 9 4 N.2R CM74 MS1200 — T10
3636536 NSR2525M3 25,0 25,0 32,0 150 32 13 5 N.3R CM72LP — MS2111 25 IP
3636540 NSR2525M4 25,0 25,0 32,0 150 35 14 7 N.4R CM72LP — MS2111 25 IP
3641664 NSR3225P3 32,0 25,0 32,0 170 32 13 5 N.3R CM72LP — MS2111 25 IP
3641675 NSR3225P4 32,0 25,0 32,0 170 35 14 7 N.4R CM72LP — MS2111 25 IP
3641666 NSR3232P3 32,0 32,0 40,0 170 32 13 5 N.3R CM72LP — MS2111 25 IP
3641669 NSR3232P4 32,0 32,0 40,0 170 35 14 7 N.4R CM72LP — MS2111 25 IP
left hand
3641683 NSL1010E2 10,0 10,0 14,0 70 19 9 4 N.2L CM75 MS1200 — T10
3641681 NSL1212F2 12,0 12,0 16,0 80 19 9 4 N.2L CM75 MS1200 — T10
3636545 NSL1616H2 16,0 16,0 20,0 100 19 9 4 N.2L CM75 MS1200 — T10
3639045 NSL2020K2 20,0 20,0 25,0 125 19 9 4 N.2L CM75 MS1200 — T10
3639046 NSL2020K3 20,0 20,0 32,0 125 32 13 5 N.3L CM73LP — MS2111 25 IP
3639047 NSL2525M2 25,0 25,0 32,0 150 19 9 4 N.2L CM75 MS1200 — T10
3636539 NSL2525M3 25,0 25,0 32,0 150 32 13 5 N.3L CM73LP — MS2111 25 IP
3636544 NSL2525M4 25,0 25,0 32,0 150 35 14 7 N.4L CM73LP — MS2111 25 IP
3641670 NSL3225P3 32,0 25,0 32,0 170 32 13 5 N.3L CM73LP — MS2111 25 IP
3641678 NSL3225P4 32,0 25,0 32,0 170 35 14 7 N.4L CM73LP — MS2111 25 IP
3641671 NSL3232P3 32,0 32,0 40,0 170 32 13 5 N.3L CM73LP — MS2111 25 IP
3641679 NSL3232P4 32,0 32,0 40,0 170 35 14 7 N.4L CM73LP — MS2111 25 IP
3641688 NSL3232P5 32,0 32,0 40,0 170 51 16 11 N.5L CM81 MS352 — 6 mm
Grooving and Cut-Off
L2
L1
B
H
CD
B4
F
3°
WID_Master16_Turning_Grooving&CutOff_E074_E075_Metric_REBRAND.indd 74 10/30/15 3:28 PM
E75
LViWID M 16 T i G i &C Off E074 E075 M i REBRANDO b 15201510 41AM
widia.com
TopGroove™
Toolholders
NAS
NOTE: F dimension measured over sharp point of insert.
order number catalogue number H B F L1 L2 B4 CD B3 L3
gage
insert clamp
clamp
screw
clamp
screw
hex/
Torx
Plus
right hand
3641667 NASR1010M2Q 10,0 10,0 10,0 150 19 9 3,5 2,03 19 N.2R CM182 MS1200 — T10
3641662 NASR1212M2Q 12,0 12,0 12,0 150 19 9 3,5 — — N.2R CM182 MS1200 — T10
3639048 NASR1616K3Q 16,0 16,0 16,0 125 32 12 5,3 — — N.3R CM184LP — MS2111 25 IP
left hand
3641691 NASL1010M2Q 10,0 10,0 10,0 150 19 9 3,5 2,03 19 N.2L CM183 MS1200 — T10
3641686 NASL1212M2Q 12,0 12,0 12,0 150 19 9 3,5 — — N.2L CM183 MS1200 — T10
3641687 NASL1616K3Q 16,0 16,0 16,0 125 32 12 5,3 — — N.3L CM185LP — MS2111 25 IP
Grooving and Cut-Off
L3 B3
F
3°
B4
CD L2
H
L1
B
WID_Master16_Turning_Grooving&CutOff_E074_E075_Metric_REBRAND.indd 75 10/30/15 3:28 PM
widia.com
E76
LViWID M 16 T i G i &C Off E076 E077 M i REBRANDN b 12 201511 49AM
TopGroove™
Toolholders
NE
NOTE: F dimension measured over sharp point of insert.
order number catalogue number H B F L1 L2 L4 B4 CD
gage
insert clamp
clamp
screw
clamp
screw
hex/
Torx
Plus
right hand
3641674 NER1616H2 16,0 16,0 20,0 100 15 25 — 4 N.2L CM75 MS1200 — T10
3641658 NER2020K2 20,0 20,0 25,0 125 15 25 6 4 N.2L CM75 MS1200 — T10
3641665 NER2525M2 25,0 25,0 32,0 150 15 25 12 4 N.2L CM75 MS1200 — T10
3636541 NER2525M3 25,0 25,0 32,0 150 22 51 — 5 N.3L CM73LP — MS2111 25 IP
3641672 NER2525M4 25,0 25,0 35,0 150 24 51 — 7 N.4L CM73LP — MS2111 25 IP
3641680 NER3225P3 32,0 25,0 32,0 170 22 51 — 4 N.3L CM73LP — MS2111 25 IP
3641689 NER3225P4 32,0 25,0 35,0 170 24 51 — 7 N.4L CM73LP — MS2111 25 IP
3641693 NER3232P4 32,0 32,0 40,0 170 24 51 — 6 N.4L CM73LP — MS2111 25 IP
3641692 NER3232P5 32,0 32,0 50,0 170 35 51 — 11 N.5L CM81 MS352 — 6 mm
left hand
3641684 NEL1616H2 16,0 16,0 20,0 100 15 25 — 4 N.2R CM74 MS1200 — T10
3641677 NEL2020K2 20,0 20,0 25,0 125 15 25 6 4 N.2R CM74 MS1200 — T10
3641676 NEL2525M2 25,0 25,0 32,0 150 15 25 12 4 N.2R CM74 MS1200 — T10
3636543 NEL2525M3 25,0 25,0 32,0 150 22 51 — 5 N.3R CM72LP — MS2111 25 IP
3641668 NEL2525M4 25,0 25,0 35,0 150 24 51 — 7 N.4R CM72LP — MS2111 25 IP
3641685 NEL3225P3 32,0 25,0 32,0 170 22 51 — 4 N.3R CM72LP — MS2111 25 IP
3641694 NEL3225P4 32,0 25,0 35,0 170 24 51 — 7 N.4R CM72LP — MS2111 25 IP
3641696 NEL3232P4 32,0 32,0 40,0 170 24 51 — 6 N.4R CM72LP — MS2111 25 IP
3641695 NEL3232P5 32,0 32,0 50,0 170 35 51 — 11 N.5R CM80 MS352 — 6 mm
Grooving and Cut-Off
L4 35°
F
3°
B4
CD
L2
H
L1
B
Right-hand toolholder shown.
WID_Master16_Turning_Grooving&CutOff_E076_E077_Metric_REBRAND.indd 76 11/12/15 11:52 AM
widia.com E77
LViWID M 16 T i G i &C Off E076 E077 M i REBRANDN b 12201511 49AM
TopGroove
Boring Bar Identifi cation System
A25RNNT OR2
Bar
Type
Bar
Diameter
Bar
Length
Insert
Holding
Method
Insert
Shape
Insert
Location
Rake
Angle
Hand
of Tool
Insert
Size
Steel with
coolant
N —
TopGroove
End mount
Right hand
Side mount
Bar diameter Left hand
E
S
R
W1
L
A
TopGroove™
Catalogue Numbering System
Metric Bars
M 150mm
Q 180mm
R 200mm
S 250mm
T 300mm
U 350mm
insert
size W1
1 3,54mm
2 3,81mm
3 5,35mm
4 6,40mm
5 9,65mm
6 9,73mm
8 11,13mm
Dia.
A25RNNTOR2
WID_Master16_Turning_Grooving&CutOff_E076_E077_Metric_REBRAND.indd 77 11/12/15 11:52 AM
E78
LViWID M 16 T i G i &C Off E078 E079 M i REBRANDO b 15 201510 42AM
widia.com
TopGroove™
Boring Bars
A-NNT
NOTE: Minimum bore capability varies with depth of groove. See pages E86–E87 for details.
F dimension measured over sharp point of insert.
order number catalogue number D D min L1 F CS
gage
insert clamp
clamp
screw
clamp
screw
hex/
Torx
Plus
right hand
3641644 A12MNNTOR2 12 18,5 150 11 1/16-27 NPT NG2L CM147 MS1200 — 2.5 mm
3641643 A16MNNTOR2 16 22,0 150 11 1/8-27 NPT N.2L CM75 MS1200 — 2.5 mm
3641645 A20QNNTOR2 20 26,0 180 13 1/8-27 NPT N.2L CM75 MS1200 — 2.5 mm
3641651 A25RNNTOR2 25 34,0 200 17 1/4-18 NPT N.2L CM75 MS1200 — 2.5 mm
3641622 A25RNNTOR3 25 34,0 200 17 1/8 - 27 NPT N.3L CM73LP — MS2111 25 IP
3641646 A32SNNTOR3 32 44,0 250 22 1/4-18 NPT N.3L CM73LP — MS2111 25 IP
3641653 A40TNNTOR3 40 54,0 300 27 1/4-18 NPT N.3L CM73LP — MS2111 25 IP
3641654 A40TNNTOR4 40 54,0 300 27 1/4-18 NPT N.4L CM73LP — MS2111 25 IP
3641661 A50UNNTOR4 50 70,0 350 35 1/4-18 NPT N.4L CM73LP — MS2111 25 IP
left hand
3641655 A12MNNTOL2 12 18,5 150 11 1/16-27 NPT NG2R CM146 MS1200 — 2.5 mm
3641649 A16MNNTOL2 16 22,0 150 11 1/8-27 NPT N.2R CM74 MS1200 — 2.5 mm
3641652 A20QNNTOL2 20 26,0 180 13 1/8-27 NPT N.2R CM74 MS1200 — 2.5 mm
3641657 A25RNNTOL2 25 34,0 200 17 1/4-18 NPT N.2R CM74 MS1200 — 2.5 mm
3641650 A25RNNTOL3 25 34,0 200 17 1/4-18 NPT N.3R CM72LP — MS2111 25 IP
3641656 A32SNNTOL3 32 44,0 250 22 1/4-18 NPT N.3R CM72LP — MS2111 25 IP
3641659 A40TNNTOL3 40 54,0 300 27 1/4-18 NPT N.3R CM72LP — MS2111 25 IP
3641663 A40TNNTOL4 40 54,0 300 27 1/4-18 NPT N.4R CM72LP — MS2111 25 IP
3641690 A50UNNTOL4 50 70,0 350 35 1/4-18 NPT N.4R CM72LP — MS2111 25 IP
Grooving and Cut-Off
Steel shank with
through coolant.
Right-hand toolholder shown.
WID_Master16_Turning_Grooving&CutOff_E078_E079_Metric_REBRAND.indd 78 10/30/15 3:28 PM
E79
LViWID M 16 T i G i &C Off E078 E079 M i REBRANDO b 15201510 42AM
widia.com
TopGroove™
Boring Bars
A-NNT-1
NOTE: Minimum bore capability varies with depth of groove. See pages E86–E87 for details.
F dimension measured over sharp point of insert.
order number catalogue number D D min D2 L1 L2 F A CS
gage
insert clamp
clamp
screw
hex/
Torx
Plus
right hand
3641648 A10KNNTOR1 10 11,5 10,0 125 — 7 3,2 — NG1L CM109 MS1034 1.5 mm
3641647 A12MNNTOR1 12 11,5 8,7 150 31,30 7 4,0 1/16-27 NPT N.1L CM109 MS1034 1.5 mm
Grooving and Cut-Off
Necked steel shank
with through coolant.
Right-hand toolholder shown.
WID_Master16_Turning_Grooving&CutOff_E078_E079_Metric_REBRAND.indd 79 10/30/15 3:28 PM
E80
LViWID M 16 T i G i &C Off E080 E081 M i REBRANDO b 15 201510 42AM
widia.com
top rake
style A style B1 style B2
style B3 style B4 style C1
style D style F style G
TopGroove
™
Inserts: The Best Platform for Customisation
All TopGroove custom order inserts bene t from the superior rigidity of our
TopGroove toolholder and clamping system. For added productivity, most
custom orders can be incorporated into the double-ended inserts.
Custom orders start with proven WIDIA
™
carbide grade technology as the
basis for optimising tool performance. Positive top rake angles are also
available in most inserts.
State-of-the-art CAD enables rapid development of your custom insert
design. For convenience, a concept drawing is always available to facilitate
engineering development of an insert.
TopGroove™
How to Place Custom Order
There are limitless variations of the at-top TopGroove design. Additionally,
chip control in the most common styles enables true optimisation and
productivity. WIDIA offers NB- and NBD-style insert blanks as well.
These blanks can be end-form ground in your own shop.
Whatever your special grooving requirements may be, WIDIA can
provide an effective solution. We have the technical expertise, resources,
and commitment to help you develop insert designs that satisfy your
metalcutting application demands.
NOTE: Common styles are shown here in right-hand versions. Left-hand versions are also available.
top rake (std. 5°)
angle 3 angle 1
angle 2
angle 1
angle 1
angle 1
angle 1
angle 2
(full radius = 1/2 W)
(full radius = 1/2 W) angle 2
(full radius = 1/2 W)
WID_Master16_Turning_Grooving&CutOff_E080_E081_Metric_REBRAND.indd 80 10/30/15 3:28 PM
E81
LViWID M 16 T i G i &C Off E080 E081 M i REBRANDO b 15201510 42AM
widia.com
TopGroove™
Custom Order Worksheet
Date
Customer-Specifi ed Dimensions
Style (circle one)
A B1 B2 B3 B4 C1 D F G
Orientation (circle one)
left hand right hand
Top Rake Total Width (T)
Cutting Width (W) Angle 1
Corner Radius 1 (R1) Angle 2
Corner Radius 2 (R2) Offset (H)
Cutting Depth (E1) Other (please specify)
Special Instructions
(please make any necessary notes
or sketches in the box at right)
Closest Catalogue Standard
Customer
Distributor
Shipping Requirements
Attention Distributors: Use this worksheet to
collect information for your customer.
TopGroove Grooving Systems
Use this Custom Order Worksheet to modify an existing product to meet
your speci cations. If your custom requirements do not fall into these
categories, simply contact your WIDIA
™
Distributor.
Trust our experienced distributors and WIDIA engineering team to design the
best solution for you.
Ground Next Day Air 2nd Day Air 3rd Day Air
UU U U
WID_Master16_Turning_Grooving&CutOff_E080_E081_Metric_REBRAND.indd 81 10/30/15 3:28 PM
E82
LViWID M 16 T i G i &C Off E082 E083 M i REBRANDN b 20 20157 01AM
widia.com
10˚ positive cutting action
• Grooving
• Face grooving
A-SK Specials
NG-SK, NF-SK, NGD-SK, and NFD-SK inserts may be specially
ordered within the specifi cations listed in the above charts.
Order example: NF3R-SK W = .090,
R1 = .010, R2 = .010, grade TN6010
™
.
Unless otherwise specifi ed, a standard tolerance of ±0,03mm
on width (W) will be applied, and a standard tolerance of
±0,06mm on radii (R1 and R2) will be applied.
If deeper cutting depth (E) is required, please specify. Refer to
the application drawing and charts for maximum face groove
depths and minimum face groove diameters.
In addition to the guidelines above, full radius face groove inserts
may be quoted. Under certain conditions, chip control performance
may vary from standard insert styles.
TopGroove™
Custom Order TopGroove™ Inserts with Chip Control
insert catalogue number
width range W
corner radii range
R1 and R2E T gradesright hand left hand
NG2-R-SK NG2-L-SK 0,66–1,42 0,00–0,18 1,27 3,810
Carbide grades
quoted upon request.
or NF2-R-SK or NF2-L-SK 1,45–3,43 0,08–0,33 2,79
NG3-R-SK NG3-L-SK
1,07–1,70 0,08–0,33 2,39
4,950
1,73–1,93 0,13–0,51 2,39
1,96–2,39 0,13–0,76 3,81
2,41–2,67 0,13–0,51 3,81
or or 2,69–3,18 0,13–0,76 3,81
NF3-R-SK NF3-L-SK 3,20–3,40 0,13–0,51 3,81
3,43–3,96 0,13–0,76 3,81
3,99–4,42 0,20–0,46 3,81
4,67–4,98 0,46–0,71 3,81
NG4-R-SK NG4-L-SK
2,54–2,79 0,13–0,51 3,81
6,480
See page E47.
2,82–3,18 0,13–0,76 3,81
3,20–3,33 0,13–0,51 3,81
3,35–3,96 0,13–0,76 3,81
or or 3,99–4,11 0,13–0,51 3,81
NF4-R-SK NF4-L-SK 3,89–4,80 0,13–0,76 6,35
4,83–4,85 0,46–0,71 6,35
4,88–5,18 0,20–0,46 6,35
6,22–6,53 0,46–0,64 6,35
WID_Master16_Turning_Grooving&CutOff_E082_E083_Metric_REBRAND.indd 82 11/20/15 7:01 AM
E83
LViWID M 16 T i G i &C Off E082 E083 M i REBRANDN b 2020157 01AM
widia.com
10˚ positive cutting action
• Deep grooving
• Deep face grooving
• Groove and chamfer
TopGroove™
Custom Order TopGroove Inserts with Chip Control
A-SK Specials
C1-SK Specials
*One cutting edge.
NG-SK, NF-SK, NGD-SK, and NFD-SK inserts may be specially
ordered within the specifi cations listed in the above charts.
Order example: NF3R-SK W = .090,
R1 = .010, R2 = .010, grade TN6010
™
.
Unless otherwise specifi ed, a standard tolerance of ±0,03mm
on width (W) will be applied, and a standard tolerance of
±0,06mm on radii (R1 and R2) will be applied.
If deeper cutting depth (E) is required, please specify. Refer to
the application drawing and charts for maximum face groove
depths and minimum face groove diameters.
In addition to the guidelines above, full radius face groove inserts
may be quoted. Under certain conditions, chip control performance
may vary from standard insert styles.
NOTE: The above insert style is for simultaneous groove and chamfer operations with chip control.
insert catalogue number
width range W
corner radii range
R1 and R2E T gradesright hand left hand
NGD3-R-SK NGD3-L-SK 1,45–1,75 .008–.033 3,18
4,95
Carbide grades
quoted upon request.
or or 2,26–2,57* .008–.033 6,35
NFD3-R-SK NFD3-L-SK 3,05–3,35* .008–.033 6,35
4,67–4,98* .046–.071 6,35
NGD4-R-SK NG4-L-SK 3,05–3,35* .008–.033 6,35
6,48
See page E47.
or or 4,57–4,98* .046–.071 9,53
NFD4-R-SK NF4-L-SK 6,22–6,53* .046–.071 12,70
insert catalogue number
width range W
corner radii range
R1 and R2E T gradesright hand left hand
NB2-R-K NB2-L-K 1,19–3,18 0,13–0,38 2,54 3,81 Carbide grades
quoted upon request.
NB3-R-K NB3-L-K 2,39–4,32 0,13–0,64 3,81 4,95
See page E47.
WID_Master16_Turning_Grooving&CutOff_E082_E083_Metric_REBRAND.indd 83 11/20/15 7:01 AM
E84
LViWID M 16 T i G i &C Off E084 E085 M i REBRANDO b 15 201510 42AM
widia.com
insert size and style clamp clamp screw shim shim screw
NG-1L CM-109 S-304 — —
NG-2R CM-182 S-310 — —
NG-2L CM-183 S-310 — —
NG-2R CM-74 S-310 — —
NG-2L CM-75 S-310 — —
NG-3R CM-184 S-412 — —
NG-3L CM-185 S-412 — —
NG-3R CM-72 S-412 — —
NG-3L CM-73 S-412 — —
NG-3R* CM-78 S-412 — —
NG-3L* CM-70 S-412 — —
NG-4R CM-72 S-412 SM-420 SL-344
NG-4L CM-73 S-412 SM-420 SL-344
NG-5R CM-80 S-352 — —
NG-5L CM-81 S-352 — —
NG-6R CM-120 S-412 SM-416 S-111
NG-6L CM-121 S-412 SM-416 S-111
TopGroove relief grooving
NU-3125R CM-72 S-412 — —
NU-3125L CM-73 S-412 — —
NU-3125R** CM-72 S-618 — —
NU-3125L** CM-73 S-618 — —
Utility threading
NTU-4R CM-72 S-412 — —
NTU-4L CM-73 S-412 — —
TopGroove Toolholders and Boring Bars
TopGroove™
Hardware
clamp screw
clamp
shim screw
shim
insert
*25mm diameter boring head.
**Boring head.
WID_Master16_Turning_Grooving&CutOff_E084_E085_Metric_REBRAND.indd 84 10/30/15 3:29 PM
E85
LViWID M 16 T i G i &C Off E084 E085 M i REBRANDO b 15201510 42AM
widia.com
problem solution
bur
1. Ensure tool centre height.
2. Use sharp tool (index more often).
3. Use positive rake PVD-coated insert.
4. Use correct grade for workpiece material.
5. Use correct geometry (e.g., positive rake
for work-hardening material).
6. Chamfer before grooving.
7. Change tool path.
poor
surface nish
1. Increase speed.
2. Use sharp tool (index more often).
3. Dwell tool in bottom 1–3 revolutions (max).
4. Use proper chip control geometry.
5. Increase coolant ow/concentration.
6. Ensure proper setup (overhang, shank size).
7. Use correct geometry (e.g., positive rake for
work-hardening material).
groove bottom
that is not at
1. Use sharp tool (index more often).
2. Dwell tool in bottom 1–3 revolutions (max).
3. Reduce tool overhang (increase rigidity).
4. Ensure correct tool alignment.
5. Reduce feed rate at groove bottom.
6. Use a wider insert.
7. Ensure tool centre height.
poor
chip control
1. Use “K” chip control geometry insert.
2. Use sharp tool (index more often).
3. Increase coolant concentration.
4. Adjust feed rate (usually increase rst).
chatter
1. Reduce tool and workpiece overhang.
2. Adjust speed and feed (usually increase rst).
3. Ensure centre height.
insert
chipping
1. Use correct grade for workpiece material.
2. Increase speed.
3. Reduce feed.
4. Use a stronger grade.
5. Increase tool and setup rigidity.
side walls
not straight
1. Check tool alignment for square.
2. Use correct insert hand.
3. Reduce workpiece and tool overhang.
4. Use sharp insert (index more often).
TopGroove™
Failure and Solution Guide
Practical Solutions to
Common Grooving Problems
Grooving Tool Failure and Solution Guide
Holder Position for Grooving Operation
How to Cut a Groove Slightly
Wider than the Groove Tool
1. Plunge the centre of the groove.
2. Plunge each side of the groove to get the speci ed width.
Use a slower feed rate when cutting groove sides.
How to Cut Wider Grooves
1. Plunge out both sides of groove width.
2. Plunge centre area to remove web of material remaining.
3. Plunge both sides of groove at the required angle, using
approximately one-half the width of the grooving tool
for maximum width of cut.
Finish Turning the Groove
1. Follow recommendations explained above.
2. To avoid insert chipping and to achieve groove wall
perpendicularity, follow the tool path outlined here.
3. Use the lightest depth of cut that still enables good
chip surface nishing.
WID_Master16_Turning_Grooving&CutOff_E084_E085_Metric_REBRAND.indd 85 10/30/15 3:29 PM
E86
LViWID M 16 T i G i &C Off E086 E087 M i REBRANDN b 11 20151 54PM
widia.com
Machining Guidelines for Chip Control • Grooving
Machining Guidelines for Chip Control • Turning/Profi ling
When the proper cutter diameter is not available, proper cutter
positioning will provide positive results.
• Centre height of insert should be positioned at the centre
of the workpiece or up to 0,13mm above.
• Dwell time in the bottom of the groove (more than three revolutions)
is not recommended.
• Chip control is feed-rate related and should be adjusted to t the
particular situation. Recommended feed range is 0,08–0,3 mm/rev.
Maximum depth of cut for side cutting (turning/pro ling)
depends on the material being cut and the width
of the tool.
• 0,79–1,6mm wide insert
can cut up to 0,6mm deep.
• 1,7–3,3mm wide insert
can cut up to 1mm deep.
• 3,5–4,8mm wide insert
can cut up to 2mm deep.
• 5–6,35mm wide insert
can cut up to 3mm deep.
Finish Turning the Groove
1. Plunge both sides of groove width.
2. Plunge centre area to remove web of
material remaining.
3. To avoid insert chipping and to achieve groove wall
perpendicularity, follow the tool path outlined.
4. Use the lightest depth of cut that still allows
good chipbreaking, tool life, and surface nish.
NOTE: The same maximum groove depth and minimum bore diameter values also apply
to metric, NG-K (chip control), and NR (full radius) inserts of similar size.
The same internal grooving depth limits are a function of bar clearance versus
bore diameters.
TopGroove™
Machining Guidelines
Groove Limits
insert
catalogue number
maximum internal
groove depth
minimum
bore diameter
mm mm
NG-1094L 1,91 20,32
—1,02 11,18
NG-2031R/L 1,27 18,54
NG-2041R/L ——
NG-2047R/L ——
NG-2058R/L ——
—2,79 63,50
NG-2062R/L 2,59 44,45
NG-2094R/L 2,49 38,10
NG-2125R/L 2,03 25,40
—1,40 18,54
NG-3047R/L ——
NG-3062R/L 2,39 44,45
NG-3072R/L 2,29 41,28
NG-3078R/L 1,91 34,93
NG-3088R/L ——
NG-3094R/L ——
NG-3097R/L 3,81 60,33
NG-3105R/L ——
NG-3110R/L 3,68 53,98
NG-3122R/L ——
NG-3125R/L 3,51 47,63
NG-3142R/L ——
NG-3156R/L 3,18 41,28
NG-3178R/L ——
NG-3185R/L 2,79 34,93
NG-3189R/L ——
NG-4125R/L 3,81 69,85
—6,35 146,05
NG-4189R/L 6,22 127,00
NG-4213R/L 6,10 114,30
NG-4219R/L 5,54 82,55
NG-4250R/L 5,08 63,50
WID_Master16_Turning_Grooving&CutOff_E086_E087_Metric_REBRAND.indd 86 11/11/15 5:34 PM
E87
LViWID M 16 T i G i &C Off E086 E087 M i REBRANDN b 1120151 54PM
widia.com
Internal Groove Depth versus Bar Interference
Machining Guidelines for Back Turning/Turning/Profi ling
Machining Guidelines for Using TopGroove Deep Grooving Inserts (NGD)
TopGroove Insert Selection Guide
The NP-K-style TopGroove inserts were engineered speci cally for back
turning on small automatic lathes, but they also nd applications for other
light turning and pro ling operations. For general applications, maximum
depth of cut should not exceed 2,74mm for size 2 inserts or 3,84mm
for size 3 inserts.
Typically, those NGD- and NRD-style inserts with two
cutting edges require no machine offset changes.
However, those inserts with only one cutting edge
do require offset changes. Refer to the chart here
to ensure proper offset adjustments.
• All TopGroove inserts are precision ground
to provide accurate edge location and secure
locking of the insert in the toolholder pocket.
• TopGroove inserts can be used in either toolholders
or boring bars.
• Right-hand TopGroove toolholders use right-hand inserts.
Left-hand TopGroove toolholders use left-hand inserts.
• Right-hand TopGroove boring bars use left-hand inserts.
Left-hand TopGroove boring bars use right-hand inserts.
NOTE: Internal grooving depth limits are a function of bar clearance versus bore diameters.
minimum bore diameter
at maximum groove depth
maximum groove depth
left-hand insert right-hand insert
TopGroove™
Machining Guidelines
insert
catalogue number
add to C
dimension
add to F
dimension
mm mm
NGD-3062 0,00 0,00
NGD-3094 2,54 2,54
NGD-3125 2,54 2,54
NGD-3189 2,54 2,54
NGD-4125 0,00 0,00
NGD-4189 3,18 3,18
NGD-4250 6,35 6,35
NRD-3031 0,00 0,00
NRD-3062 2,54 2,54
NRD-4062 0,00 0,00
NRD-4094 6,35 6,35
NRD-4125 6,35 6,35
WID_Master16_Turning_Grooving&CutOff_E086_E087_Metric_REBRAND.indd 87 11/11/15 5:34 PM
E88
LViWID M 16 T i G i &C Off E088 E089 M i REBRANDO b 15 201510 43AM
widia.com
Machining Guidelines for Poly-Vee Grooving with Custom Solution
and TopGroove NV Inserts (NV3-J and NV4-L)
Groove Dimensions and Tolerances for Sheaves
• To machine cross section “J”, use insert NV3-J.
• To machine cross section “L”, use insert NV4-L.
TopGroove™
Machining Guidelines
R1
R2
S
Section J
groove pitch
width P
pitch diameter
groove depth
Section L
distance between
centres of terminal grooves
N = number of grooves
groove
cross section
pitch
width
(P)
groove
depth
(G)
minimum
radius
(R2)
radius
(R1)
terminal
distance
distance between centres
of terminal grooves and maximum
accumulated tolerance
J2,34 2,21 0,20 0,32 3,18 (N-1)4,88
±0,03 ±0,13 ±0,06 ±0,25
L4,70 5,11 0,38 0,32 3,18 (N-1)4,70
±0,05 ±0,13 ±0,06 ±0,25
WID_Master16_Turning_Grooving&CutOff_E088_E089_Metric_REBRAND.indd 88 10/30/15 3:29 PM
E89
LViWID M 16 T i G i &C Off E088 E089 M i REBRANDO b 15201510 43AM
widia.com
Multiple Tooth Poly–Vee Grooving
Machining Guidelines for Undercutting Operations Performed with Custom Solution
and TopGroove NU Inserts (NU3094, NU3125, and NU3156)
Let WIDIA
™
quote your multiple tooth poly-vee grooving applications.
Semi-standard inserts and holders are available. The strong TopGroove
design holds the insert rigid and outperforms any other tooling method
for this application.
TopGroove™
Machining Guidelines
25mm
diameter minimum
2,54mm
2,54mm
NOTE: Items shown are non-standard items.
WID_Master16_Turning_Grooving&CutOff_E088_E089_Metric_REBRAND.indd 89 10/30/15 3:29 PM
E90
LViWID M 16 T i G i &C Off E090 E091 M i REBRANDO b 15 201510 43AM
widia.com
Machining Guidelines for Face Grooving Operations • External
Toolholders
Machining Guidelines for Face Grooving Operations • External
Boring Bars
TopGroove™
Machining Guidelines
RH holder
LH holder
RH insert
LH insert
LH holder
RH holder
B
groove depth
C
RH bar
RH insert
LH insert
LH bar
B
groove depth
C
Standard NG/NGD Inserts
insert
family
maximum
groove depth B
minimum
groove diameter C
mm mm
NG-2 1,27 54,0
NG-2 2,79 88,9
NG-3 2,39 101,6
NG-3 3,18 127,0
NG-3 3,81 139,7
NGD-3 6,35 174,6
NG-4 3,81 152,4
NG-4 6,35 209,6
NGD-4 9,53 222,3
NGD-4 12,70 222,3
Standard NF/NDF Inserts
insert
family
maximum
groove depth B
minimum
groove diameter C
mm mm
NF-3 1,52 23,9
NF-3 2,39 30,5
NF-3 3,18 36,1
NF-3 3,81 41,3
NFD-3 6,35 47,6
NFD-4 9,53 57,2
NFD-4 12,70 57,2
WID_Master16_Turning_Grooving&CutOff_E090_E091_Metric_REBRAND.indd 90 10/30/15 3:29 PM
E91
LViWID M 16 T i G i &C Off E090 E091 M i REBRANDO b 15201510 43AM
widia.com
Machining Guidelines for Face Grooving Operations • Internal
Boring Bars
TopGroove™
Machining Guidelines
minimum
groove “E”
diameter
D
groove depth
LH insert
LH bar
RH bar
RH insert
C
Standard NG/NGD Inserts
insert
family
maximum
groove depth B
minimum
groove diameter C
mm mm
NFD-3-KI 6,35 63,5
NOTE: Also check minimum bore diameter
of boring bar. See page E78.
WID_Master16_Turning_Grooving&CutOff_E090_E091_Metric_REBRAND.indd 91 10/30/15 3:29 PM
E92
LViWID M 16 T i G i &C Off E092 E093 M i REBRANDO b 29 201511 46AM
widia.com
• Single-end grooving and cut-off inserts.
• Offered with integral toolholders and blades.
• Shallow, deep grooving, and cut-off capabilities.
• Available in four different geometries.
ProGroove
ProGroove™ •
Grooving and Cut-Off
With easy-to-change inserts available in multiple high-performance
carbide grades, the ProGroove system ensures accurate, reliable,
and reproducible cutting edge performance.
WID_Master16_Turning_Grooving&CutOff_E092_E093_Metric_REBRAND.indd 92 10/30/15 3:29 PM
E93
LViWID M 16 T i G i &C Off E092 E093 M i REBRANDO b 29201511 46AM
widia.com
ProGroove™
Grades and Grade Descriptions
Coatings provide high-speed
capability and are engineered
for fi nishing to light roughing.
PSteel
MStainless Steel
KCast Iron
NNon-Ferrous
SHigh-Temp Alloys
HHardened Materials
• Reduce cycle times —
high speed and feed capability.
• Longer tool life — new multilayer
coating provides better wear resistance.
wear
resistance toughness
Coating Grade Description 05 10 15 20 25 30 35 40 45
TN6030
PVD-TiAlN Nanolayer coated carbide. Medium and heavy machining
for steels and nodular cast irons. Recommended at medium cutting
speeds when good toughness properties are required.
P
M
K
HC-P30
TN7525
MT-CVD/CVD — TiN-TiCN-Al2O3-TiN coated carbide.
Light and medium machining for steels and nodular cast irons.
P
K
HC-P25
TN7535
MT-CVD/CVD — TiN-TiCN-Al2O3 coated carbide. Medium and heavy machining
for steels and nodular cast iron.
P
K
HC-P35
TN8025
MT-CVD/CVD-TiN-TiCN-Al2O3-ZrCN coated carbide. Light and medium
machining for all stainless steels. Can be used both with or without coolant.
M
HC-M25
THM
Uncoated carbide for light and medium machining. For cast iron
and all non-ferrous metals and non-metals. Also capable of
machining hardened materials at low cutting speeds.
K
N
S
HW-K15 H
TTM
Uncoated carbide with good toughness and wear properties.
Medium machining for steels.
P
M
HW-P25
Grade
WID_Master16_Turning_Grooving&CutOff_E092_E093_Metric_REBRAND.indd 93 10/30/15 3:29 PM
E94
LViWID M 16 T i G i &C Off E094 E095 M i REBRANDN b 11 20151 55PM
widia.com
ProGroove™
Feed Values for Grooving Inserts
PGU
PGM
PGS
PGR
LG System • 0 and 1
For grooving and parting operations, universal use.
Positive chipbreaker groove for light cutting action.
Right-hand and left-hand styles with 6° front angle.
For grooving and parting, also capable of copy
and straight turning as well as chamfering. With
additional chip forming element for good chip
control with varying depths of cut.
For low-bur parting with straight anks and smooth surface
nishes. All inserts are recommended for parting and
grooving slender workpieces, part diameter <32mm, and
thin-wall tubes.
Full round inserts for pro ling, grooving, and
copy turning. Very good chip control for broad
general use. Accurate, reproducible cutting
edge positioning.
…0
Inserts with wide range of applications in grooving and
deep grooving. With additional chip control element for
good chip control, even with varying widths of cut.
…1
Inserts with wide range of uses in grooving and
deep grooving of short chipping materials.
feed rate [mm]
width of cut [mm]
feed rate [mm]
width of cut [mm]
feed rate [mm]
width of cut [mm]
feed rate [mm]
width of cut [mm]
feed rate [inch]
width of cut [mm]
left-hand neutral right-hand
neutral
left-hand neutral right-hand
0 1
1 Recommended Starting Feed
1 Recommended Starting Feed
1 Recommended Starting Feed
1 Recommended Starting Feed
1 Recommended Starting Feed
WID_Master16_Turning_Grooving&CutOff_E094_E095_Metric_REBRAND.indd 94 11/11/15 5:35 PM
E95
LViWID M 16 T i G i &C Off E094 E095 M i REBRANDN b 1120151 55PM
widia.com
ProGroove™
Recommended Cutting Speeds • Metric
Grooving and Cut-Off
Material
Group
Cutting Speed — vc
m/min
TN6030 TN7525 TN7535 TN8025 THM TTM
min Start max min Start max min Start max min Start max min Start max min Start max
P
0/1
130
140
150 200
215
230 140
175
210 –
–
––
–
–90
95
100
2
110
145
175 170
220
270 115
145
175 –
–
––
–
–75
100
125
3
110
145
175 170
220
270 115
145
175 –
–
––
–
–75
100
125
4
75
95
115 115
145
175 75
100
120 –
–
––
–
–55
65
80
5
100
125
145 155
190
220 105
140
170 –
–
––
–
–70
85
100
6
40
55
65 65
85
100 45
60
75 –
–
––
–
–30
40
45
M
1
90
110
140 –
–
––
–
–90
120
150 –
–
–60
75
90
2
55
70
90 –
–
––
–
–55
75
95 –
–
–40
50
55
3
60
75
95 –
–
––
–
–60
80
100 –
–
–40
50
60
K
1
60
80
90 120
150
180 –
–
––
–
–60
80
90 –
–
–
2
60
75
85 120
150
180 –
–
––
–
–60
75
85 –
–
–
3
60
75
90 110
140
170 –
–
––
–
–60
75
90 –
–
–
N
1
–
–
––
–
––
–
––
–
– 600
750
900 –
–
–
2
–
–
––
–
––
–
––
–
– 535
685
835 –
–
–
3
–
–
––
–
––
–
––
–
– 230
300
370 –
–
–
4
–
–
––
–
––
–
––
–
– 135
180
225 –
–
–
5
–
–
––
–
––
–
––
–
–70
90
110 –
–
–
6
–
–
––
–
––
–
––
–
– 445
565
690 –
–
–
7
–
–
––
–
––
–
––
–
– 550
700
850 –
–
–
S
1
–
–
––
–
––
–
––
–
–25
35
40 –
–
–
2
–
–
––
–
––
–
––
–
–15
20
20 –
–
–
3
–
–
––
–
––
–
––
–
–40
60
70 –
–
–
4
–
–
––
–
––
–
––
–
–20
30
35 –
–
–
H
1
–
–
––
–
––
–
––
–
–10
20
35 –
–
–
2
–
–
––
–
––
–
––
–
–10
20
35 –
–
–
3
–
–
––
–
––
–
––
–
–10
20
35 –
–
–
4
–
–
––
–
––
–
––
–
–10
20
35 –
–
–
WID_Master16_Turning_Grooving&CutOff_E094_E095_Metric_REBRAND.indd 95 11/11/15 5:35 PM
E96
LViWID M 16 T i G i &C Off E096 E097 M i REBRANDO b 15 201510 44AM
widia.com
ProGroove System
To change the cutting insert, place the wrench into the blade recess.
The blade mouth is opened by turning through 90°.
ProGroove™
Clamping Principles
In this position, the wrench is self-locking, leaving both hands free
for changing the cutting insert.
The cutting insert is pressed against the rear seat in the blade mouth,
releasing the wrench. The insert is accurately positioned and securely clamped.
WID_Master16_Turning_Grooving&CutOff_E096_E097_Metric_REBRAND.indd 96 10/30/15 3:29 PM
E97
LViWID M 16 T i G i &C Off E096 E097 M i REBRANDO b 15201510 44AM
widia.com
ProGroove™
Grooving and Cut-Off Inserts
Neutral
rst choice
alternate choice
Grooving and Cut-Off
PGU
catalogue number
insert
size W RR hand
TN6030
TN7525
TN7535
TN8025
THM
TTM
123567320 2 2,10 0,20 N - Neutral
2953289
2498725
2498713
2021804
2008876
–
123567330 3 3,10 0,30 N - Neutral
2953284
–
2498714
2017822
2008931
–
123567340 4 4,10 0,30 N - Neutral
2953286
2498727
2498715
–
2009080
–
123567350 5 5,10 0,30 N - Neutral
2953673
2498728
2498716
–
2021873
–
123567360 6 6,10 0,40 N - Neutral
2953674
2952333
2952350
–
2009385
–
123567380 8 8,15 0,60 N - Neutral
2953666
–
2952351
2009482
2009504
–
NOTE: W tolerance on all = ±0,05mm. (continued)
P
M
K
N
S
H
WID_Master16_Turning_Grooving&CutOff_E096_E097_Metric_REBRAND.indd 97 10/30/15 3:29 PM
E98
LViWID M 16 T i G i &C Off E098 E099 M i REBRANDO b 15 201510 44AM
widia.com
ProGroove™
Grooving and Cut-Off Inserts
Left
Right
rst choice
alternate choice
Grooving and Cut-Off
catalogue number
insert
size W RL _R hand
TN6030
TN7525
TN7535
TN8025
THM
TTM
123567230 3 3,10 0,25 6 R - Right
2953291
2498729
2498717
–
–
–
123567240 4 4,10 0,25 6 R - Right
2953667
2498731
2498719
–
–
–
NOTE: W tolerance on all = ±0,05mm.
catalogue number
insert
size W RR _Lhand
TN6030
TN7525
TN7535
TN8025
THM
TTM
123567231 3 3,10 0,25 6 L - Left
2953672
2498730
2498718
–
–
–
123567241 4 4,10 0,25 6 L - Left
2953676
–
–
–
–
–
(PGU — continued) P
M
K
N
S
H
WID_Master16_Turning_Grooving&CutOff_E098_E099_Metric_REBRAND.indd 98 10/30/15 3:29 PM
E99
LViWID M 16 T i G i &C Off E098 E099 M i REBRANDO b 15201510 44AM
widia.com
ProGroove™
Grooving and Cut-Off Inserts
PGM
catalogue number
insert
size W RR hand
TN6030
TN7525
TN7535
TN8025
THM
TTM
123567420 2 2,10 0,20 N - Neutral
2953679
2498733
2498721
–
–
–
123567430 3 3,10 0,30 N - Neutral
2953678
2498734
2498722
–
–
–
123567440 4 4,10 0,30 N - Neutral
2953663
2498735
2498723
–
–
–
123567450 5 5,10 0,30 N - Neutral
2953671
2498736
2498724
–
–
–
123567460 6 6,10 0,40 N - Neutral
2953677
2952335
2952352
–
–
–
123567480 8 8,15 0,60 N - Neutral
2953675
2952336
2952353
–
–
–
Neutral
rst choice
alternate choice
NOTE: W tolerance on all = ±0,05mm.
Grooving and Cut-Off
P
M
K
N
S
H
WID_Master16_Turning_Grooving&CutOff_E098_E099_Metric_REBRAND.indd 99 10/30/15 3:29 PM
E100
LViWID M 16 T i G i &C Off E100 E101 M i REBRANDN b 10 20152 06PM
widia.com
ProGroove™
Grooving and Cut-Off Inserts
catalogue number
insert
size W RL _R hand
TN6030
TN7525
TN7535
TN8025
THM
TTM
123567720 2 2,25 0,20 6 R - Right
–
–
2952357
–
–
–
123567730 3 3,25 0,20 6 R - Right
–
–
2952359
2017912
–
–
123567740 4 4,25 0,20 6 R - Right
–
–
2952361
–
–
–
catalogue number
insert
size W RR _L hand
TN6030
TN7525
TN7535
TN8025
THM
TTM
123567721 2 2,25 0,20 6 L - Left
–
–
2952358
–
–
–
123567731 3 3,25 0,20 6 L - Left
–
–
2952360
–
–
–
PGS
catalogue number
insert
size W RR hand
TN6030
TN7525
TN7535
TN8025
THM
TTM
123567702 2 2,25 0,20 N - Neutral
–
–
2952354
–
–
–
123567703 3 3,25 0,20 N - Neutral
–
–
2952355
–
–
–
123567704 4 4,25 0,20 N - Neutral
–
–
2952356
–
–
–
NOTE: W tolerance on all = ±0,05mm.
Left
Right
Neutral
rst choice
alternate choice
Grooving and Cut-Off
P
M
K
N
S
H
WID_Master16_Turning_Grooving&CutOff_E100_E101_Metric_REBRAND.indd 100 11/11/15 9:26 AM
E101
LViWID M 16 T i G i &C Off E100 E101 M i REBRANDN b 1020152 06PM
widia.com
ProGroove™
Grooving and Cut-Off Inserts
PGR
catalogue number
insert
size W RC
TN6030
TN7525
TN7535
TN8025
THM
TTM
123567803 3 3,00 1,50
–
2952337
–
–
–
–
123567804 4 4,00 2,00
–
2952338
–
–
–
–
123567805 5 5,00 2,50
–
2952339
–
–
–
–
123567806 6 6,00 3,00
–
2952340
–
–
–
–
rst choice
alternate choice
NOTE: W tolerance on all = ±0,07mm.
Grooving and Cut-Off
P
M
K
N
S
H
WID_Master16_Turning_Grooving&CutOff_E100_E101_Metric_REBRAND.indd 101 11/11/15 9:26 AM
E102
LViWID M 16 T i G i &C Off E102 E103 M i REBRANDO b 15 201510 44AM
widia.com
ProGroove™
Grooving and Cut-Off Integral Holders
Grooving and Cut-Off
order number catalogue number
seat
size W CD H B F L1 L2 H1
cap
screw
cap
screw wrench
right hand
2007136 12251782000 2 2,10 16,0 16 16,0 16,2 100 27 16 — 12146012600 12148041100
2962743 12250023000 3 3,10 20,0 19 19,1 19,4 127 32 19 12148596200 — —
2962745 12250023200 3 3,10 25,0 25 25,4 25,7 152 40 25 12148596200 — —
2022560 12251783000 3 3,10 20,0 20 20,0 20,3 125 32 20 12148596200 — —
2007142 12251783200 3 3,10 25,0 25 25,0 25,3 150 40 25 12148596200 — —
2008153 12251783600 3 3,10 25,0 32 25,0 25,3 170 40 32 12148596200 — —
2022562 12251784000 4 4,10 25,0 20 20,0 20,4 125 40 20 12148596200 — —
2007148 12251784200 4 4,10 25,0 25 25,0 25,4 150 40 25 12148596200 — —
2022564 12251785200 5 5,10 32,0 25 25,0 25,4 150 53 25 12148596200 — —
2022566 12251785400 5 5,10 32,0 32 25,0 25,4 170 53 32 12148596200 — —
2962751 12250025200 5 5,11 32,0 25 25,4 25,8 152 53 25 12148596200 — —
2015814 12251784400 6 4,10 32,0 32 25,0 25,4 170 53 32 12148596200 — —
2022568 12251786400 6 6,10 32,0 32 25,0 25,5 170 53 32 — 12146012700 12148041300
2022569 12251788400 8 8,10 40,0 32 25,0 25,6 170 66 32 — 12146012700 12148041300
left hand
2007139 12251782100 2 2,10 16,0 16 16,0 16,2 100 27 16 — 12146012600 12148041100
2962744 12250023100 3 3,10 20,0 19 19,1 19,4 127 32 19 12148596200 — —
2022561 12251783100 3 3,10 20,0 20 20,0 20,3 125 32 20 12148596200 — —
2007145 12251783300 3 3,10 25,0 25 25,0 25,3 150 40 25 12148596200 — —
2008150 12251783700 4 3,10 25,0 32 25,0 25,3 170 40 32 12148596200 — —
2022563 12251784100 4 4,10 25,0 20 20,0 20,4 125 40 20 12148596200 — —
2007151 12251784300 4 4,10 25,0 25 25,0 25,4 150 40 25 12148596200 — —
2015816 12251784500 4 4,10 32,0 32 25,0 25,4 170 53 32 12148596200 — —
2015839 12251786500 4 6,10 32,0 32 25,0 25,5 170 53 32 — 12146012700 12148041300
2022565 12251785300 5 5,10 32,0 25 25,0 25,4 150 53 25 12148596200 — —
2022567 12251785500 5 5,10 32,0 32 25,0 25,4 170 53 32 12148596200 — —
2015842 12251788500 8 8,10 40,0 32 25,0 25,6 170 66 32 — 12146012700 12148041300
Grooving and Cut-Off
Right Hand Tool Shown
WID_Master16_Turning_Grooving&CutOff_E102_E103_Metric_REBRAND.indd 102 10/30/15 3:29 PM
E103
LViWID M 16 T i G i &C Off E102 E103 M i REBRANDO b 15201510 44AM
widia.com
ProGroove™
Grooving and Profiling Integral Holders
Grooving and Profiling
NOTE: Select shorter CD dimension for added stability.
order number catalogue number
seat
size W CD D max H B F L1 L2 H1
cap
screw
cap
screw wrench
right hand
2007105 12251762000 2 2,10 10,0 25,4 16 16,0 16,2 100 26 16 — 12146012600 12148041100
2021637 12251762400 2 2,10 10,0 25,4 25 25,0 25,2 150 26 25 — 12146012600 12148041100
2007111 12251763200 2 3,10 10,0 25,4 25 25,0 25,3 150 26 20 12148596200 — —
2007127 12251763400 3 3,10 10,0 25,4 16 16,0 16,3 100 26 25 12148596200 — —
2007130 12251764200 3 4,10 12,5 32,0 25 25,0 25,4 150 31 25 12148596200 — —
2007832 12251762200 4 2,10 10,0 25,4 20 20,0 20,2 125 26 25 — 12146012600 12148041100
2022548 12251764000 4 4,10 12,5 32,0 20 20,0 20,4 125 31 20 12148596200 — —
2022550 12251764400 4 4,10 12,5 32,0 32 25,0 25,4 170 31 32 12148596200 — —
2022552 12251765200 5 5,10 12,5 — 25 25,0 25,5 150 31 25 12148596200 — —
2015792 12251768400 5 8,10 16,0 — 32 25,0 25,7 170 36 32 — 12146012700 12148041300
2022555 12251766200 6 6,10 16,0 — 25 25,0 25,6 150 35 25 — 12146012700 12148041300
2022557 12251766400 6 6,10 16,0 — 32 25,0 25,6 170 35 32 — 12146012700 12148041300
2015754 12251763000 8 3,10 10,0 25,4 20 20,0 20,3 125 26 25 12148596200 — —
left hand
2007108 12251762100 2 2,10 10,0 25,4 16 16,0 16,2 100 26 16 — 12146012600 12148041100
2021636 12251762500 2 2,10 10,0 25,4 25 25,0 25,2 150 26 25 — 12146012600 12148041100
2007124 12251763300 2 3,10 10,0 25,4 25 25,0 25,3 150 26 20 12148596200 — —
2021631 12251762300 3 2,10 10,0 25,4 20 20,0 20,2 125 26 16 — 12146012600 12148041100
2022547 12251763100 3 3,10 10,0 25,4 20 20,0 20,3 125 26 20 12148596200 — —
2007133 12251764300 3 4,10 12,5 32,0 25 25,0 25,4 150 31 25 12148596200 — —
2015782 12251765500 3 5,10 12,5 — 32 25,0 25,5 170 31 20 12148596200 — —
2022549 12251764100 4 4,10 12,5 32,0 20 20,0 20,4 125 31 20 12148596200 — —
2022551 12251764500 4 4,10 12,5 32,0 32 25,0 25,4 170 31 32 12148596200 — —
2022553 12251765300 5 5,10 12,5 — 25 25,0 25,5 150 31 25 12148596200 — —
2022556 12251766300 6 6,10 16,0 — 25 25,0 25,6 150 35 25 — 12146012700 12148041300
2022558 12251766500 6 6,10 16,0 — 32 25,0 25,6 170 35 32 — 12146012700 12148041300
2021627 12251763500 83,10 10,0 25,4 16 16,0 16,3 100 26 32 12148596200 — —
2022559 12251768500 8 8,10 16,0 — 32 25,0 25,7 170 36 32 — 12146012700 12148041300
Right Hand Tool Shown
Grooving and Cut-Off
WID_Master16_Turning_Grooving&CutOff_E102_E103_Metric_REBRAND.indd 103 10/30/15 3:29 PM
E104
LViWID M 16 T i G i &C Off E104 E105 M i REBRANDO b 15 201510 44AM
widia.com
ProGroove™
Blades
Cut-Off Blades
order number catalogue number
seat
size W H H1 L1 B CD wrench
2021629 12251332000 2 2,1 19,0 15,7 90 1,7 20 12146003800
2021639 12251342000 2 2,1 26,0 21,4 110 1,7 25 12146003800
2008113 12251352000 2 2,1 32,0 25,0 150 1,7 25 12146003800
2021640 12251343000 3 3,1 26,0 21,4 110 2,4 40 12146003800
2008116 12251353000 3 3,1 32,0 25,0 150 2,4 50 12146003800
2021641 12251344000 4 4,1 26,0 21,4 110 3,2 40 12146003800
2008119 12251354000 4 4,1 32,0 25,0 150 3,2 50 12146003800
2008122 12251355000 5 5,1 32,0 25,0 150 4,2 60 12146003800
2008135 12251356000 6 6,1 32,0 25,0 150 5,0 60 12146009500
2008138 12251358000 8 8,1 32,0 25,0 150 6,8 60 12146009500
2021743 12251368000 8 8,1 52,5 45,0 250 6,8 100 12146009500
Grooving and Cut-Off
Blade Holders
Cut-Off Blade Holders
order number catalogue number HW H B F H2 B2 H3 L
cap
screw wrench
2021625 12251221900 19 16,0 16,0 28,3 30 30 4 100 12148036000 12148041300
2021634 12251212500 19 25,0 19,0 17,3 25 19 — 100 12148036000 12148041300
2021626 12251221600 26 16,0 16,0 31,0 40 36 12 100 12148036000 12148041300
2007826 12251222000 26 20,0 18,0 33,0 40 38 8 100 12148036000 12148041300
2008141 12251213200 26 32,0 20,0 15,0 32 20 — 125 12148036000 12148041300
2021635 12251222500 32 25,0 20,0 35,0 50 40 10 125 12148036000 12148041300
2008156 12251223200 32 32,0 25,0 40,0 50 45 3 125 12148036000 12148041300
2008159 12251233200 53 32,0 25,0 50,0 82 57 30 160 12146013400 12148041400
2021723 12251234000 53 40,0 40,0 58,0 82 65 22 160 12146013400 12148041400
NOTE: Order wrench separately.
WID_Master16_Turning_Grooving&CutOff_E104_E105_Metric_REBRAND.indd 104 10/30/15 3:30 PM
E105
LViWID M 16 T i G i &C Off E104 E105 M i REBRANDO b 15201510 44AM
widia.com
LG
Wide Grooving Inserts
LGN0
catalogue number W RR
TN6030
TN7525
TN7535
TN8025
THM
TTM
123568080 8,15 0,80
–
2952341
2952363
–
2017973
2009562
123568100 10,15 0,80
–
2952342
2952364
–
2017976
–
123568120 12,20 0,80
–
2952343
2952365
–
2017980
–
123568140 14,20 0,80
–
2952344
2952366
–
2022789
–
123568160 16,20 0,80
–
2952345
2952367
–
2022790
2021798
NOTE: W tolerance on all = ± 0,05mm.
Grooving and Cut-Off
RR = RL
rst choice
alternate choice
LGN1
catalogue number W RR
TN6030
TN7525
TN7535
TN8025
THM
TTM
123568081 8,15 0,80
–
–
–
–
2022787
–
123568121 12,20 0,80
–
–
–
–
2017993
–
123568141 14,20 0,80
–
–
–
–
2017996
–
123568161 16,20 0,80
–
–
–
–
2022791
–
NOTE: W tolerance on all = ±0,05mm.
RR = RL
P
M
K
N
S
H
WID_Master16_Turning_Grooving&CutOff_E104_E105_Metric_REBRAND.indd 105 10/30/15 3:30 PM
E106
LViWID M 16 T i G i &C Off E106 E107 M i REBRANDN b 18 20157 39AM
widia.com
LG
Integral Toolholders
Grooving
order number catalogue number
seat
size W CD H B F L1 H1
right hand
2022446 12250110100 1 8,00 20,0 32 25,0 25,5 170 32
2008147 12250110300 1 10,00 20,0 32 25,0 25,5 170 32
2021719 12250110500 1 12,00 25,0 40 32,0 33,0 200 40
2021721 12250110700 1 14,00 28,0 40 32,0 33,0 200 40
2008521 12250110900 1 16,00 32,0 40 32,0 33,0 200 40
left hand
2022447 12250110200 1 8,00 20,0 32 25,0 25,5 170 32
2008144 12250110400 1 10,00 20,0 32 25,0 25,5 170 32
2021718 12250110600 1 12,00 25,0 40 32,0 33,0 200 40
2021720 12250110800 — 14,00 28,0 40 32,0 33,0 200 40
2021722 12250111000 1 16,00 32,0 40 32,0 33,0 200 40
Spare Parts
Right Hand Tool
1. Clamping bolt
2. Wedge clamp
3. Clamping screw
Grooving and Cut-Off
catalogue number
clamping
bolt
wedge
clamp
clamping
screw
wrench for
clamp screw
wrench for
clamp screw
wrench for
clamping bolt
right hand
12250110100 12148060600 12148094300 12148574100 12148041000 — 12148046000
12250110300 12148060600 12148094400 12148574900 — 12148041100 12148046000
12250110500 12148060700 12148094500 12148574900 — 12148041100 12148040900
12250110700 12148060700 12148094600 12148574000 — 12148041200 12148040900
12250110900 12148060800 12148094700 12148574000 12148041000 12148041200 —
left hand
12250110200 12148060600 12148094300 12148574100 12148041000 — 12148046000
12250110400 12148060600 12148094400 12148574900 — 12148041100 12148046000
12250110600 12148060700 12148094500 12148574900 — 12148041100 12148040900
12250110800 12148060700 12148094600 12148574000 — 12148041200 12148040900
12250111000 12148060800 12148094700 12148574000 12148041000 12148041200 —
WID_Master16_Turning_Grooving&CutOff_E106_E107_Metric_REBRAND.indd 106 11/18/15 7:40 AM
E107
LViWID M 16 T i G i &C Off E106 E107 M i REBRANDN b 1820157 39AM
widia.com
276
Integral Holders for Grooving with ISO Inserts
catalogue number clamp
clamp
screw
clamp
screw shim
shim
screw
shim
screw washer wrench
12191061900 12148589200 12148589800 — 12148032586 — 12148021900 — —
12191062086 12148586800 — 12148586000 12148031686 12148024100 — 12148024200 —
12191062586 12148586800 — 12148586000 12148031686 12148024100 — 12148024200 —
12191062686 12148586900 — 12148021100 12148032086 12148024500 — 12148024800 —
12191063286 12148586900 — 12148021100 12148032086 12148024500 — 12148024800 —
For Grooving without Chipbreaker
Grooving
NOTE: Gage inserts listed are ISO-/ANSI-style inserts.
Holders are supplied without chipbreaker. For chipbreaker order numbers, see below.
order number W H1 H B L1 L2 aP°
gage
insert
2022921 10,40 20 20 9,5 125 21 3 TP..1103../TP..22..
2007414 15,30 20 20 13,0 150 27 3 TP..1603../TP..32..
2022922 15,30 25 25 13,0 150 27 3 TP..1603../TP..32..
2058066 20,20 25 25 18,0 150 35 3 TP..2204../TP..43..
2022923 20,20 32 32 18,0 180 35 3 TP..2204../TP..43..
Grooving and Cut-Off
For Grooving with Chipbreaker (Order Additional Clamp and Chipbreaker)
chipbreakers
inserts
clamp with
chipbreaker D
B — edge width
0,4mm 1,2mm 1,8mm 2,5mm 3,2mm 4,0mm
TP...1103... 12148589200 6,35 12148591011 12148588211 12148588311 12148588411 – –
TP...1603... 12148589300 9,52 12148591111 12148586611 12148587011 12148587111 12148580011 435101
TP...2204... 12148586900 12,70 – – 12148580411 12148580511PKG 12148580611 12148582511
WID_Master16_Turning_Grooving&CutOff_E106_E107_Metric_REBRAND.indd 107 11/18/15 7:40 AM
E108
LViWID M 16 T i G i &C Off E108 E109 M i REBRANDN b 13 20153 28PM
widia.com
• Insert widths 2–4mm.
• Toolholder shank sizes 10–31, 75mm.
• Cut-off up to 76mm bar capacity.
• Quick, reliable insert indexing.
• Positive mechanical clamping.
• CNC square shank, screw machine,
and PL blade-style toolholders.
Features
Benefi ts
Separator
Separator™ for Cut-Off
Specifi cally engineered to deliver toolholder
fl exibility with integral, component, universal,
and blade-style designs.
WID_Master16_Turning_Grooving&CutOff_E108_E109_Metric_REBRAND.indd 108 11/13/15 4:27 PM
E109
LViWID M 16 T i G i &C Off E108 E109 M i REBRANDN b 1320153 28PM
widia.com
Separator™
Grades and Grade Descriptions
Coatings provide high-speed
capability and are engineered
for fi nishing to light roughing.
• Reduce cycle times —
high speed and feed capability.
• Longer tool life — new multilayer
coating provides better wear resistance.
PSteel
MStainless Steel
KCast Iron
NNon-Ferrous
SHigh-Temp Alloys
HHardened Materials
Grade
wear
resistance toughness
Coating Grade Description 05 10 15 20 25 30 35 40 45
M40
A premium, single-phase PVD TiN coating over a tough, specially formulated substrate
that performs well under extremely low to moderate speed conditions found on screw
machines. Ideal for carbon steels, alloy steels, most stainless steels, and many high-
temperature alloys.
P
M
K
N
S
HC-P35
M43
PVD-TiAlN multilayer coating over a tough, shock-resistant, ne-grained carbide
substrate with increased oxidation resistance. Recommended on low to medium
cutting speeds when good toughness properties are required.
P
M
K
N
S
HC-P25
M433B
PVD-TiAlN single-layer coating over a superiorly tough, ne-grained carbide substrate.
Outstanding temperature properties with excellent resistance to avoid built-up edges.
Medium to high speeds and feeds. For stainless steels and high-temperature alloys.
P
M
N
S
HC-M30
M45
A premium PVD-TiCN coated, shock-resistant carbide designed for low to moderate
speeds. Excellent resistance to welding and BUE, along with improved abrasion
resistance make this an ideal grade for austenitic stainless steel, low carbon steel,
and high-temperature alloys.
P
M
K
N
S
HC-P30
M93
PVD-TiAlN multilayer coating over a tough, ne-grained carbide substrate with
increased resistance to heat. Recommended for medium to higher cutting speeds
under moderate conditions.
P
M
K
N
S
HC-P20
WID_Master16_Turning_Grooving&CutOff_E108_E109_Metric_REBRAND.indd 109 11/13/15 4:27 PM
E110
LViWID M 16 T i G i &C Off E110 E111 M i REBRANDN b 11 20158 14AM
widia.com
PSteel
MStainless Steel
KCast Iron
NNon-Ferrous
SHigh-Temp Alloys
HHardened Materials
1 Choose the application to be performed:
2 Identify the material to be machined:
3 Select your toolholder based
on the application:
Choose lead angle of insert for application.
Each tool has a material grid marked
with a letter indicating the materials
that can be machined.
A Choose the appropriate width of insert
required for the application.
B Choose the shortest cutting depth “CD”
dimension for increased tool rigidity.
C Select the largest toolholder shank
“H” and “B” dimensions for maximum
rigidity.
R.H. Lead Angle
R.H. Lead Angle
Separator™
Insert Selection System
L.H. Lead Angle
ABC C
B
A
C
WID_Master16_Turning_Grooving&CutOff_E110_E111_Metric_REBRAND.indd 110 11/11/15 9:26 AM
E111
LViWID M 16 T i G i &C Off E110 E111 M i REBRANDN b 1120158 14AM
widia.com
See page E113 for cutting data.
insert type steel stainless steel cast iron
non-ferrous
metals high-temp alloys
hardened
materials
fi rst choice X
2
-Ultra
(X
2
has wipers) X
2
-Ultra X
2
-Ultra X
2
-Ultra X
2
-Ultra —
second choice S
2
-Ultra S
2
-Ultra Classic S
2
-Ultra S
2
-Ultra X
2
See page E109 for Grades and Grade Descriptions.
4 Select chipbreaker style for the application:
5 Select grade:
6 Determine cutting data:
See the application guide on page E112
for a complete list of insert styles.
A Based on material group and
grade, identify starting speed (vc).
B First choice starting speed
is in bold.
Separator™
Insert Selection System
Recommended Grades
machining condition steel stainless steel cast iron
non-ferrous
metals
high-temp
alloys
hardened
materials
high performance
for optimal conditions (clean cuts,
good machine condition, higher
speed capability)
M93 M433B M93 M93 M433B –
—M93— —M93 –
general purpose
(1st choice for general machining)
M43 M43 M43 M43 M43 M93
unfavourable conditions
(interrupted cuts, low
speeds, etc.)
M45 M45 M45 M45 M45 –
M40 M40 M40 M40 M40 –
AB
WID_Master16_Turning_Grooving&CutOff_E110_E111_Metric_REBRAND.indd 111 11/11/15 9:26 AM
E112
LViWID M 16 T i G i &C Off E112 E113 M i REBRANDO b 15 201510 46AM
widia.com
Separator • X2 and X2-Ultra
Separator • S2 and S2-Ultra
Separator • Classic and F2
This insert has the same geometry as the WMT-SX™. Chip
control geometry offers the widest range of speed and feed
capabilities and provides excellent atness and nish. This
chipbreaker cuts with the least amount of tool pressure,
extending tool life. The geometry also includes wipers and
a corner radius. This geometry works well on a variety of
materials.
This insert has the same geometry as the WMT-SX-Ultra. The
X2-Ultra is an enhanced version of the X2 and is ideal for stainless
steels, nickel-based alloys, tool steel, INCONEL®, and titanium.
High positive rake with a more open chipbreaker enables
increased speeds and feeds for moderate- to high-speed
applications. The geometry includes wipers and a corner
radius that provides superior atness and nish. This insert
is also available with sharp corners. Its greatest strengths
can be seen on stainless steels and soft gummy steels.
The S2-Ultra is an enhanced version of the S2 and is ideal
for 300 series stainless steels, nickel-based alloys, tool steel,
INCONEL, and titanium at moderate to high speeds and feeds.
A good general-purpose insert for carbon steels, alloy steels,
and most stainless steels. The Separator Classic chipbreaker
is designed to perform well at moderate to slow speeds and
feeds. The Classic provides standard high lead angles and sharp
corners, making it the rst choice when choosing an insert for
nib-free cut-off.
This insert provides superior atness and nish on a wide variety
of materials Ideal for thick wall parts or cutting off larger diameter
parts to centre. The Separator F2 performs well at slow to
moderate speeds and feeds.
S2-Ultra
X2-Ultra
S2
X2
Classic
F2
Separator™ Inserts
Feed Values for Grooving
feed rate [mm]
width of cut [mm]
feed rate [mm]
width of cut [mm]
feed rate [mm]
width of cut [mm]
1 Recommended Starting Feed
1 Recommended Starting Feed
1 Recommended Starting Feed
0,30
0,25
0,20
0,15
0,10
0,05
2,5 3,0 4,0
0,30
0,25
0,20
0,15
0,10
0,05
2,0 2,5 3,0
0,30
0,25
0,20
0,15
0,10
0,05
1,5 2,5 3,2
4
,
04
,
8
WID_Master16_Turning_Grooving&CutOff_E112_E113_Metric_REBRAND.indd 112 10/30/15 3:30 PM
E113
LViWID M 16 T i G i &C Off E112 E113 M i REBRANDO b 15201510 46AM
widia.com
Separator™
Recommended Cutting Speeds • Metric
Material
Group
Cutting Speed — vc
m/min
M40 M43 M433B M45 M93
min Start max min Start max min Start max min Start max min Start max
P
0/1
40
80
115 110
160
210 –
–
–45
85
125 150
200
245
2
30
60
85 75
120
165 –
–
–40
65
95 115
150
185
3
30
60
85 75
120
165 –
–
–40
65
95 115
150
185
4
25
45
60 55
90
125 30
70
115 25
45
70 80
110
140
5
35
60
85 85
110
140 85
115
145 40
65
95 105
140
170
6
15
30
40 35
50
65 35
50
70 20
30
45 45
60
75
M
1
30
45
60 50
75
100 55
90
130 35
50
65 90
120
150
2
20
30
40 35
50
65 35
60
80 25
35
50 55
75
95
3
20
35
40 35
50
65 35
60
85 25
40
50 60
80
100
K
1
65
95
125 90
135
175 200
260
320 75
110
145 130
175
225
2
65
95
125 90
135
175 210
270
330 75
110
140 135
170
225
3
55
90
120 80
125
170 215
275
335 65
105
145 110
140
215
N
1
210
370
520 275
440
610 –
–
– 245
400
550 305
490
670
2
170
325
480 230
400
570 –
–
– 200
355
510 265
450
630
3
135
205
275 180
260
335 –
–
– 150
230
305 210
305
400
4
80
120
165 105
150
190 –
–
–95
135
175 130
180
225
5
45
75
100 60
85
115 –
–
–50
80
110 70
105
135
6
165
290
420 220
360
500 –
–
– 190
320
450 255
410
560
7
180
340
490 245
410
580 –
–
– 215
370
520 275
460
640
S
1
25
35
40 25
40
50 30
45
50 30
35
45 35
45
60
2
10
15
20 15
20
25 15
20
25 10
15
20 20
25
30
3
35
45
60 35
50
65 40
55
70 35
50
65 55
65
80
4
15
25
30 25
30
35 25
30
40 20
25
35 30
35
45
H
1
–
–
––
–
––
–
––
–
––
–
–
2
–
–
––
–
––
–
––
–
––
–
–
3
–
–
––
–
––
–
––
–
––
–
–
4
–
–
––
–
––
–
––
–
––
–
–
WID_Master16_Turning_Grooving&CutOff_E112_E113_Metric_REBRAND.indd 113 10/30/15 3:30 PM
E114
LViWID M 16 T i G i &C Off E114 E115 M i REBRANDO b 15 201510 46AM
widia.com
Separator™
X² Inserts
catalogue number
insert
size W RL _R hand
M40
M43
M433B
M45
M93
507306 2 2,39 0,14 5 R - Right
–
–
–
3540874
3540875
507309 3 3,20 0,17 5 R - Right
–
–
–
3540882
3540883
catalogue number
insert
size W RR _L hand
M40
M43
M433B
M45
M93
507307 2 2,39 0,14 5 L - Left
–
–
–
3540876
3540877
507310 3 3,20 0,17 5 L - Left
–
–
–
3540884
3540885
X²
catalogue number
insert
size W RR hand
M40
M43
M433B
M45
M93
507305 2 2,39 0,14 N - Neutral
–
–
–
3540872
3540873
507308 3 3,20 0,17 N - Neutral
–
3540878
–
3540879
3540880
Grooving and Cut-Off
rst choice
alternate choice
P
M
K
N
S
H
Neutral, RL = RR Left Hand
Right Hand
WID_Master16_Turning_Grooving&CutOff_E114_E115_Metric_REBRAND.indd 114 10/30/15 3:30 PM
E115
LViWID M 16 T i G i &C Off E114 E115 M i REBRANDO b 15201510 46AM
widia.com
Separator™
P
M
K
N
S
H
X² Ultra Inserts
X² Ultra
catalogue number
insert
size W RR hand
M40
M43
M433B
M45
M93
507354 2 2,39 0,15 N - Neutral
–
–
3540926
–
–
507357 3 3,20 0,15 N - Neutral
–
–
3540929
–
–
rst choice
alternate choice
catalogue number
insert
size W RL _R hand
M40
M43
M433B
M45
M93
507355 2 2,39 0,13 5 R - Right
–
–
3540927
–
–
507358 3 3,20 0,15 5 R - Right
–
–
3540930
–
–
catalogue number
insert
size W RR _L hand
M40
M43
M433B
M45
M93
507356 2 2,39 0,13 5 L - Left
–
–
3540928
–
–
507359 3 3,20 0,15 5 L - Left
–
–
3540931
–
–
Grooving and Cut-Off
Neutral, RL = RR Left Hand
Right Hand
WID_Master16_Turning_Grooving&CutOff_E114_E115_Metric_REBRAND.indd 115 10/30/15 3:30 PM
E116
LViWID M 16 T i G i &C Off E116 E117 M i REBRANDO b 15 201510 46AM
widia.com
Separator™
S² Inserts
catalogue number
insert
size W RR _L hand
M40
M43
M433B
M45
M93
507277 2 2,39 0,20 5 L - Left
–
–
–
3540815
3540816
507297 3 3,00 0,20 5 L - Left
–
3540863
–
–
3540865
507280 3 3,20 0,20 5 L - Left
–
–
–
3540830
–
507283 5 4,78 0,20 5 L - Left
–
–
–
–
3540846
S²
catalogue number
insert
size W RR hand
M40
M43
M433B
M45
M93
507275 2 2,39 0,20 N - Neutral
3540807
3540803
–
3540805
3540806
507295 3 3,00 0,25 N - Neutral
–
3540857
–
3540858
3540859
507278 3 3,20 0,25 N - Neutral
3540822
3540818
–
3540820
3540821
507378 4 4,00 0,25 N - Neutral
–
3540951
–
3540952
3540953
507281 5 4,78 0,25 N - Neutral
–
3540833
–
3540835
3540836
rst choice
alternate choice
P
M
K
N
S
H
Grooving and Cut-Off
Neutral, RL = RR Left Hand
WID_Master16_Turning_Grooving&CutOff_E116_E117_Metric_REBRAND.indd 116 10/30/15 3:30 PM
E117
LViWID M 16 T i G i &C Off E116 E117 M i REBRANDO b 15201510 46AM
widia.com
Separator™
S² Inserts
catalogue number
insert
size W RL _Rhand
M40
M43
M433B
M45
M93
507276 2 2,39 0,20 5 R - Right
3540812
3540808
–
3540810
3540811
507301 2 2,39 — 5 R - Right
–
–
–
3540870
–
507296 3 3,00 0,20 5 R - Right
–
3540860
–
3540861
3540862
507279 3 3,20 0,20 5 R - Right
3540827
3540823
–
3540825
3540826
507298 3 3,20 — 5 R - Right
–
3540866
–
3540867
3540868
507379 4 4,00 0,25 5 R - Right
–
3540954
–
3540955
–
507282 5 4,78 0,20 5 R - Right
–
3540838
–
3540840
3540841
rst choice
alternate choice
P
M
K
N
S
H
Grooving and Cut-Off
Right Hand
WID_Master16_Turning_Grooving&CutOff_E116_E117_Metric_REBRAND.indd 117 10/30/15 3:30 PM
E118
LViWID M 16 T i G i &C Off E118 E119 M i REBRANDO b 15 201510 46AM
widia.com
Separator™
P
M
K
N
S
H
S² Ultra Inserts
S² Ultra
catalogue number
insert
size W RR hand
M40
M43
M433B
M45
M93
507329 2 2,39 0,15 N - Neutral
–
–
3540907
–
–
507332 3 3,18 0,15 N - Neutral
–
–
3540910
–
–
rst choice
alternate choice
catalogue number
insert
size W RL _R hand
M40
M43
M433B
M45
M93
507330 2 2,39 0,15 5 R - Right
–
–
3540908
–
–
507333 3 3,18 0,15 5 R - Right
–
–
3540911
–
–
catalogue number
insert
size W RR _Lhand
M40
M43
M433B
M45
M93
507331 2 2,39 0,15 5 L - Left
–
–
3540909
–
–
507334 3 3,18 0,15 5 L - Left
–
–
3540912
–
–
Grooving and Cut-Off
Neutral, RL = RR Left Hand
Right Hand
WID_Master16_Turning_Grooving&CutOff_E118_E119_Metric_REBRAND.indd 118 10/30/15 3:30 PM
E119
LViWID M 16 T i G i &C Off E118 E119 M i REBRANDO b 15201510 46AM
widia.com
Separator™
Classic Inserts
catalogue number
insert
size W _L hand
M40
M43
M433B
M45
M93
507152 2 2,36 12 L - Left
3540594
–
–
–
–
507144 2 2,39 4 L - Left
3540554
–
–
3540553
–
507154 3 3,15 12 L - Left
3540598
–
–
3540597
–
507129 3 3,20 4 L - Left
3540510
–
–
3540509
–
507125 5 4,78 4 L - Left
3540487
–
–
–
–
Classic
catalogue number
insert
size W hand
M40
M43
M433B
M45
M93
507196 2 1,60 N - Neutral
3540664
–
–
3540663
–
507140 2 2,39 N - Neutral
3540530
–
–
3540528
3540529
507117 3 3,20 N - Neutral
3540461
–
–
3540459
3540460
507116 5 4,78 N - Neutral
3540449
–
–
3540447
–
rst choice
alternate choice
Grooving and Cut-Off
P
M
K
N
S
H
(continued)
Neutral Left Hand
WID_Master16_Turning_Grooving&CutOff_E118_E119_Metric_REBRAND.indd 119 10/30/15 3:30 PM
E120
LViWID M 16 T i G i &C Off E120 E121 M i REBRANDO b 15 201510 47AM
widia.com
Separator™
Classic Inserts
catalogue number
insert
size W _Rhand
M40
M43
M433B
M45
M93
507197 2 1,60 4 R - Right
3540666
–
–
–
–
507214 2 1,60 12 R - Right
3540692
–
–
3540691
–
507207 2 2,31 4 R - Right
–
–
–
3540685
–
507151 2 2,36 12 R - Right
3540589
3540585
–
3540587
–
507143 2 2,39 4 R - Right
3540544
–
–
3540542
3540543
507161 2 2,39 18 R - Right
3540613
–
–
3540612
–
507171 3 3,12 6 R - Right
3540628
–
–
–
–
507146 3 3,15 12 R - Right
3540562
–
–
3540560
–
507155 3 3,15 18 R - Right
3540603
–
–
3540602
–
507128 3 3,20 4 R - Right
3540498
–
–
3540496
3540497
507224 3 3,20 4 R - Right
3540700
–
–
3540698
–
507176 5 4,72 12 R - Right
3540634
–
–
3540633
–
507124 5 4,78 4 R - Right
3540479
–
–
3540477
3540478
rst choice
alternate choice
NOTE: 507207 and 507224 have a modified aggressive chip control design.
Grooving and Cut-Off
P
M
K
N
S
H
(Classic — continued)
Right Hand
WID_Master16_Turning_Grooving&CutOff_E120_E121_Metric_REBRAND.indd 120 10/30/15 3:30 PM
E121
LViWID M 16 T i G i &C Off E120 E121 M i REBRANDO b 15201510 47AM
widia.com
Separator™
F² Inserts
catalogue number
insert
size W _R hand
M40
M43
M433B
M45
M93
507241 2 2,39 4 R - Right
3540747
–
–
3540746
–
507242 2 2,39 12 R - Right
3540750
–
–
3540749
–
507243 2 2,39 18 R - Right
3540753
–
–
3540752
–
507245 3 3,18 4 R - Right
3540759
–
–
3540758
–
507246 3 3,18 12 R - Right
3540762
–
–
3540761
–
507247 3 3,18 18 R - Right
3540764
–
–
3540763
–
507252 5 4,75 4 R - Right
3540774
–
–
3540773
–
507253 5 4,78 12 R - Right
3540777
–
–
3540776
–
catalogue number
insert
size W _L hand
M40
M43
M433B
M45
M93
507255 2 2,39 12 L - Left
3540781
–
–
–
–
507257 3 3,18 4 L - Left
–
–
–
3540784
–
F²
catalogue number
insert
size W hand
M40
M43
M433B
M45
M93
507240 2 2,39 N - Neutral
3540744
–
–
3540743
–
507244 3 3,20 N - Neutral
3540756
–
–
3540755
–
Grooving and Cut-Off
Left Hand
Right Hand
Neutral
rst choice
alternate choice
P
M
K
N
S
H
WID_Master16_Turning_Grooving&CutOff_E120_E121_Metric_REBRAND.indd 121 10/30/15 3:30 PM
E122
LViWID M 16 T i G i &C Off E122 E123 M i REBRANDO b 15 201510 47AM
widia.com
Separator™
Toolholders
Square Shank
order number catalogue number W D max B FS H L2 L1 clamp
clamp
screw
right hand
3614290 206445 2,00 20,00 9,86 9,00 10,00 21,55 75,00 435200 MS318
3538751 206446 2,00 20,00 11,86 11,00 12,00 21,55 90,00 435200 MS318
3538752 206447 2,00 26,00 9,86 9,00 10,00 24,83 150,00 435201 MS318
3587590 206448 2,00 26,00 11,86 11,00 12,00 24,83 150,00 435201 MS318
3615308 206449 2,00 38,00 15,86 15,00 16,00 32,83 100,00 435202 MS412
3538753 206450 2,00 38,00 19,86 19,00 20,00 32,84 125,00 435202 MS412
3538706 206265 2,50 20,00 11,74 10,81 12,00 21,51 89,95 435170 MS318
3538718 206279 2,50 26,00 9,75 8,81 10,00 24,80 150,00 435152 MS318
3538719 206280 2,50 26,00 11,73 10,80 12,00 24,80 150,00 435152 MS318
3538721 206282 2,50 38,00 15,75 14,81 16,00 32,80 100,00 435140 MS412
3538723 206284 2,50 38,00 19,74 18,80 20,00 32,80 125,00 435140 MS412
3538720 206281 3,00 26,00 11,68 10,39 12,00 23,62 150,00 435130 MS318
3538722 206283 3,00 38,00 15,70 14,40 16,00 32,85 100,00 435126 MS412
3565364 206285 3,00 38,00 19,68 18,39 20,00 32,85 125,00 435126 MS412
left hand
3614291 206451 2,00 20,00 9,86 9,00 10,00 21,55 75,00 435203 MS318
3538754 206452 2,00 20,00 11,86 11,00 12,00 21,55 90,00 435203 MS318
3614292 206453 2,00 26,00 9,86 9,00 10,00 24,83 150,00 435204 MS318
3538755 206454 2,00 26,00 11,00 11,00 12,00 24,83 150,00 435204 MS318
3538756 206455 2,00 38,00 15,86 15,00 16,00 32,83 100,00 435205 MS412
3615309 206456 2,01 38,00 19,86 19,00 20,00 32,84 125,00 435205 MS412
3538705 206264 2,50 20,00 9,75 8,80 10,00 21,51 74,96 435171 MS318
3538707 206266 2,50 20,00 11,74 10,81 12,00 21,51 89,95 435171 MS318
3538711 206272 2,50 26,00 9,75 8,81 10,00 24,80 150,00 435153 MS318
3538712 206273 2,50 26,00 11,73 10,80 12,00 24,80 150,00 435153 MS318
3538714 206275 2,50 38,00 15,75 14,81 16,00 32,80 100,00 435141 MS412
3538716 206277 2,50 38,00 19,74 18,80 20,00 32,80 125,00 435141 MS412
3538713 206274 3,00 26,00 11,68 10,39 12,00 23,62 150,00 435131 MS318
3538715 206276 3,00 38,00 15,70 14,40 16,00 32,85 100,00 435127 MS412
3538717 206278 3,00 38,00 19,68 18,39 20,00 32,85 125,00 435127 MS412
Left Hand Tool
Grooving and Cut-Off
NOTE: Above toolholders are supplied with clamp and clamp screw.
WID_Master16_Turning_Grooving&CutOff_E122_E123_Metric_REBRAND.indd 122 10/30/15 3:30 PM
E123
LViWID M 16 T i G i &C Off E122 E123 M i REBRANDO b 15201510 47AM
widia.com
Extended Capacity
Left Hand Tool Shown
Extended Capacity
Right Hand Tool Shown
Separator™
Toolholders
Square Shank • Extended Capacity
order number catalogue number W CD B FS H L2 L1 clamp
clamp
screw
right hand
3538741 206417 3,00 25,00 24,74 23,50 25,00 42,92 150,00 435180 619168
3538742 206418 4,00 25,00 24,69 23,00 25,00 42,97 150,00 435180 619168
left hand
3538743 206419 3,00 25,00 24,74 23,50 25,00 42,92 150,00 435181 619168
3615303 206424 4,00 25,00 24,69 23,00 25,00 42,96 150,00 435181 619168
Grooving and Cut-Off
NOTE: Above toolholders are supplied with clamp and clamp screw.
WID_Master16_Turning_Grooving&CutOff_E122_E123_Metric_REBRAND.indd 123 10/30/15 3:30 PM
E124
LViWID M 16 T i G i &C Off E124 E125 M i REBRANDN b 10 20152 07PM
widia.com
12mm and 20mm Shank Blades
order number catalogue number W D max FS L L1 clamp
right hand
3539515 333101 2,50 41,28 3,25 44,88 40,13 435154
3539516 333102 3,00 41,28 2,84 44,88 40,13 435155
3539522 333111 2,00 41,28 3,40 44,88 40,13 435194
left hand
3539517 333103 2,50 41,28 3,25 44,88 40,13 435156
3539518 333104 3,00 41,28 2,84 44,88 40,13 435157
Right Hand Tool
Support Blade Assembly
Separator™
12mm and 20mm Shank Toolholders
order number catalogue number H B B2 L L1 H2 F
support blade
screw
clamp
screw
right hand
3538772 206518 12,00 11,53 24,99 102,77 84,68 19,05 20,55 606247 MS1495
3614344 206522 20,00 20,00 — 102,77 84,68 — 15,55 606247 MS1495
left hand
3538773 206519 12,00 11,53 24,99 102,77 84,68 19,05 20,55 606247 MS1495
3538774 206523 20,00 20,00 — 102,77 84,68 — 15,55 606247 MS1495
Grooving and Cut-Off
Left Hand Tool Left Hand Tool Right Hand Tool
Toolholders
NOTE: Clamps do not ship with blades. Order clamps separately.
L1 Blade
L1 Holder
L1 Assy
FS Holder
F Assy
FS Blade
L1 Assy = L1 (Holder) + L1 (Blade)
F Assy = F (Holder) + FS (Blade) + W/2
WID_Master16_Turning_Grooving&CutOff_E124_E125_Metric_REBRAND.indd 124 11/11/15 9:26 AM
E125
LViWID M 16 T i G i &C Off E124 E125 M i REBRANDN b 1020152 07PM
widia.com
Support Blade Assembly
25mm and 32mm Shank Blades
order number catalogue number W CD FS L L1 clamp
right hand
3563591 331117 2,50 12,70 2,39 36,03 29,60 435142
3539504 331101 3,00 20,64 1,98 43,80 37,63 435128
3539508 331109 4,00 20,64 1,98 43,80 37,63 435128
left hand
3539510 331118 2,50 12,70 2,39 36,03 29,60 435143
3539505 331102 3,00 20,64 1,98 43,80 37,63 435129
3539509 331110 4,00 20,64 1,98 43,80 37,63 435129
Left Hand Blade and Clamp Shown
L1 Assy = L1 (holder) + L1 (blade)
F Assy = F (holder) + FS (blade) + W/2
L1 blade L1 holder
L1 Assy
FS holder
F Assy
W FS blade
Separator™
25mm and 32mm Shank Toolholders
order number catalogue number H B L L1 F
support blade
screw
clamp
screw
clamp
screw
right hand
3538772 206518 12,00 11,53 102,77 84,68 20,55 606247 — MS1495
3614344 206522 20,00 20,00 102,77 84,68 15,55 606247 — MS1495
3538710 206271 25,00 24,61 131,90 112,16 21,41 MS1073 MS1071 —
left hand
3538773 206519 12,00 11,53 102,77 84,68 20,55 606247 — MS1495
3538774 206523 20,00 20,00 102,77 84,68 15,55 606247 — MS1495
3615305 206440 32,00 31,60 132,03 112,18 28,42 MS1073 MS1071 —
Grooving and Cut-Off
Left Hand Tool Right Hand Tool
Toolholders
NOTE: Clamps do not ship with blades. Order clamps separately.
WID_Master16_Turning_Grooving&CutOff_E124_E125_Metric_REBRAND.indd 125 11/11/15 9:26 AM
E126
LViWID M 16 T i G i &C Off E126 E127 M i REBRANDN b 11 20152 23PM
widia.com
Separator™
Toolholders
Universal Style Toolholder • 56mm Bar Capacity
NOTE: Support blade requires two screws.
Order blades separately.
NOTE: All components ship separately.
order number catalogue number B H H2 F L1 L
clamp
screw
right hand
3614289 206408 26,97 25,00 43,66 40,16 105,46 144,14 MS1294
Left Hand Tool Right Hand Tool
Grooving and Cut-Off
WL1FS
left hand clamp
for 206410
left hand clamp
for 206442
support
blade
right hand clamp
for 206441
right hand clamp
for 206408
2.5 44,50 0,91 435149 435151 310109 435150 435148
3.0 44,50 1,27 435104 435110 310102 435116 435101
4.0 44,50 1,84 435105 435109 310108 435117 435102
Components
L1 Assy = L1 (holder) + L1 (blade)
F Assy = F (holder) + FS (blade) + W/2
L1 Blade L1 Holder
L1 Assy
F Holder
F Assy
WFS Blade
WID_Master16_Turning_Grooving&CutOff_E126_E127_Metric_REBRAND.indd 126 11/11/15 5:35 PM
E127
LViWID M 16 T i G i &C Off E126 E127 M i REBRANDN b 1120152 23PM
widia.com
L1 Assy = L1 (holder) + L1 (blade)
F Assy = F (holder) + FS (blade) + W/2
L1 Blade L1 Holder
L1 Assy
F Holder
F Assy
WFS Blade
Separator™
Toolholders
NOTE: All components ship separately.
Universal Style Toolholder • 76mm Bar Capacity
NOTE: Support blade requires two screws.
Order blades separately.
order number catalogue number B H H2 F L1 L
support blade
screw
clamp
screw
right hand
3538739 206411 27,00 25,00 56,36 39,78 102,96 150,85 MS1072 MS352
3615306 206443 27,00 32,00 56,36 39,78 102,96 150,85 MS1072 MS1294
Components
W L1 FS left hand clamp support blade right hand clamp
3.0 57,05 1,27 435137 309111 435136
4.0 57,05 1,84 435106 309105 435103
Right Hand Tool
Grooving and Cut-Off
WID_Master16_Turning_Grooving&CutOff_E126_E127_Metric_REBRAND.indd 127 11/11/15 5:35 PM
E128
LViWID M 16 T i G i &C Off E128 E129 M i REBRANDN b 11 20152 30PM
widia.com
Separator™
Toolholders
Sub-Spindle
order number catalogue number W D max B FS H H2 H3 L1 LS L2
button-head
cap screw clamp
fl at-head
cap screw washer
right hand
3538766 206506 3,00 66,70 24,76 23,50 25,00 44,45 9,52 150,00 89,05 60,31 MS518 409182 606243 613139
left hand
3538769 206509 2,50 42,00 19,75 18,80 20,00 37,65 7,62 140,00 96,57 42,66 MS518 409185 606244 613139
3538767 206507 3,00 66,70 24,76 23,50 25,00 44,45 9,52 150,00 89,05 60,32 MS518 409183 606243 613139
Grooving and Cut-Off
Left Hand Tool
WID_Master16_Turning_Grooving&CutOff_E128_E129_Metric_REBRAND.indd 128 11/11/15 5:35 PM
LViWID M 16 T i G i &C Off E128 E129 M i REBRANDN b 1120152 30PM
WIDIA™ Victory™
High-Temp
Turning
The new -FS and -MS geometries from WIDIA are specifi cally designed for use in high-temperature
alloys, nickel-based (INCONEL®, Udimet®, Rene) materials, cobalt-based (Haynes®), Fe-based (Airmet 100)
materials, titanium and titanium alloys, as well as diffi cult-to-machine stainless (460SS, duplex, high-alloy
stainless), cobalt-chrome, and stainless-based powdered metals.
..GG-FS Geometry
• All ..GG-FS inserts are periphery ground to provide
a G tolerance. This is a critical in some applications,
especially in the aerospace industry.
• Precision grinding provides a high quality cutting edge
which reduces depth-of-cut notching and delivers
consistent surface quality in fi nishing applications.
• Be more productive by utilising the higher speed
capability provided by the latest in PVD coating
technology and optimised post-coat treatment.
• Achieve better tool life through the high positive rake
angle which reduces cutting forces and built-up edge.
..MG-MS Geometry
• High positive rake angle delivers improved tool life
by reducing cutting forces and built-up edge when
machining high-temp alloys.
• Improved chip control and reduced crater wear due to
proprietary chipbreakers with varying shapes
and distances.
• Reduced thermal wear and cracking due to near sharp
cutting edge with optimised edge treatment.
• Improved chipbreaking at various depths of cut due
to variable land width, which improves impact strength.
• All MG-MS inserts are moulded, which supports
increased tool life due to the elimination of
grinding stress.
To learn more, contact your local
Authorised Distributor or visit widia.com.
WID_Master16_Turning_Grooving&CutOff_E128_E129_Metric_REBRAND.indd 129 11/11/15 5:35 PM
E130
LViWID M 16 T i G i &C Off E130 E131 M i REBRANDN b 24 20152 50PM
widia.com
Separator™
Machining Guidelines
Defi nitions and Guidelines
1. Width of cut (W) = width of the insert.
2. Lead angle = 0° (neutral); 4°, 5°, 12°, 18° (RH or LH).
Reduce bur of cut-off faces:
• Use lead angle-type inserts (Figures 1 and 2). Lead
angle on a cut-off insert reduces the bur that remains
on the part but decreases tool life and increases tool
side de ection and possibly cycle time.
Figure 1
Insert selection left-hand lead
Left-hand lead insert leaves centre stub or bur on part
and produces clean stock surface.
Figure 2
Insert selection right-hand lead
Right-hand lead insert leaves centre stub or bur on stock and
produces clean part surface.
• Check total height and maintain on centre with part diameter.
• The cutting edge height should be within ±.0,1mm to the
centre; recommended cutting position is 0,05mm above centre.
Figure 3
Above centre
• If 0° lead angle is mandatory,
use the narrowest possible
cut-off insert and blade. This
will minimise the centre stub or
cut-off bur length. Decrease the
feed rate to maximum 0,05mm
or less at the point where
diameter equals insert width.
• On tubing-type parts that
require a chamfer on the I.D.,
align I.D. chamfer tool with cut-
off surface. This will enable the
chamfering operation to actually
separate the part from the bar
(see Figure 4). Note the part
may drop onto the chamfering
bar, which, in this case, will act
like a catcher for the part.
Figure 4
Internal chamfer line up
Improve surface fi nish of cut-off faces:
• Use insert with 0° lead angle.
• Increase coolant ow or improve application technique,
as shown in Figure 5.
• Decrease the feed rate near the break-through point of the cut.
• Check that the grooving tool is set at the correct angle.
• Use blades with the greatest possible face height and smallest
possible cutting width.
• Increase the speed.
max 0,10mm
(.004")
Figure 5
Preferred method for applying coolant
• Mount cut-off tool upside down. This enables gravity to remove
chips and avoid cutting the chips twice. Another bene t of
mounting the tool upside down is preventing chips from wedging
between the tool insert and the groove side walls, which galls the
side wall surfaces.
centre stub part bur
(stock)
cut-off to centre tube cut-off
(stock)
centre stub part
bur
(stock)
cut-off to centre tube cut-off
(stock)
WID_Master16_Turning_Grooving&CutOff_E130_E131_Metric_REBRAND.indd 130 11/24/15 2:58 PM
E131
LViWID M 16 T i G i &C Off E130 E131 M i REBRANDN b 2420152 58PM
widia.com
Improve chip control:
• Adjust feed rate up or down to accommodate chip formation.
• Use a 0° or smallest lead available.
• Use ample amounts of well-directed coolant (see Figure A).
• Maintain sharp cutting edge and corners.
Improve fl atness of cut-off surfaces:
• Maintain 90° position (perpendicular alignment) between
cut-off tool and workpiece.
• For low to moderate speed (sfpm), use Separator F2.
• For moderate to high speed (sfpm), use Separator S2
or X2.
• Use strongest toolholder system possible.
• Use 0° lead angle inserts when possible. If lead angle
inserts are needed, reduce the feed rate.
• Check for minimum overhang of holder and blade.
• Set up for minimum workpiece overhang
(distance out of chuck).
• Reduce feed rate.
• Maintain sharp edge and corners on cut-off insert.
• Increase speed (RPM).
• Use ample amounts of well-directed coolant
(see Figure A).
• Maintain proper tool centre height 0–0,1mm
above centre (see Figure B).
Improve surface fi nish:
• For low to moderate speed (sfpm), use Separator F2.
• For moderate to high speed (sfpm), use Separator S2 or X2.
• Avoid overly aggressive chip control.
• Increase speed.
• Reduce lead angle and feed rate.
• Determine if corner radius is too large or small.
• Use a coated grade.
• Use coolant (see Figure A).
Figure A
Minimise edge chipping:
• Check to see if tool is signi cantly above or below centre.
• Reduce feed prior to part drop-off.
• Use Separator S2 or X2.
• Choose the proper speed associated with
the insert grade used.
• Call Technical Support to see if a larger hone
size is needed.
• Eliminate chatter.
• Avoid chip re-cutting.
• Check for these part and machine problems:
– Slide is loose.
– Slide travel is irregular.
– Bar/tube I.D. and/or O.D. is out of round.
– Bar/tube is bent.
– Thin wall collapses (deforms) in the cut.
– Part is unstable.
– Cut-off through unturned stock.
– Excessive tool overhang.
– Bent or partly attached ash ring.
Preferred method of applying coolant Coolant on cut-off tool
Separator™
Technical Recommendations • Separator Cut-Off System
(continued)
Figure B
WID_Master16_Turning_Grooving&CutOff_E130_E131_Metric_REBRAND.indd 131 11/24/15 2:58 PM
E132
LViWID M 16 T i G i &C Off E132 E133 M i REBRANDN b 11 20152 33PM
widia.com
Separator™
Technical Recommendations • Separator Cut-Off System
Eliminate chatter:
• Minimise tool blade and holder overhang.
• Minimise part overhang.
• Use strongest toolholder system.
• Use a more narrow width of insert.
• Chipbreaker might be too aggressive.
(Call Technical Support.)
• Adjust speed and feed rate up or down.
• Hold workpiece rigidly.
• With a longer part, support with steady rest or live centre.
• Avoid machine dwell.
• Use S2 or X2 to reduce cutting forces.
Reduce cut-off nib on solid bar
or I.D. bur on tubing:
• Check tool height. Insert cutting edge should be on centre to
0,05mm above centreline of workpiece.
• To reduce nib on part, use a high lead angle-type insert. Lead
angle on a cut-off insert reduces the nib, which remains on the
workpiece. CAUTION: the higher the lead, the more tool-side
de ection.
• Use the narrowest possible cut-off insert to minimise the
cut-off bur length.
• Reduce feed rate at the end of a cut.
• On most tubing-type parts, a 4° or 5° lead angle will be
suf cient.
• Add support to a long slender-type part.
• Maintain proper sub-spindle alignment.
• If nib or bur persists, call Technical Support about
reducing hone size.
• Use small- or no-corner radius.
Eliminate built-up edge:
• Select proper grade for insert.
• Increase speed (RPM).
• Increase the feed rate.
• Use ample amounts of well-directed coolant
(see Figure A on page E131).
Chamfer and cut-off operations:
• Use Separator S2 or X2.
• Groove or breakdown workpiece surface being machined.
• Machine the chamfer.
• For jobs requiring a chamfer on both ends of the part, begin
by plunging to a depth just beyond the depth of the chamfers.
Then, return to the part O.D. and pro le each chamfer
individually. Finish the cut-off after completion of the
second chamfer.
• Cut off the workpiece (see Figure C).
Figure C
(continued)
WID_Master16_Turning_Grooving&CutOff_E132_E133_Metric_REBRAND.indd 132 11/11/15 5:35 PM
E133
Language Version: WID_Master16_Turning_Grooving&CutOff_E132_E133_Metric_REBRAND December 18, 2015 2:30 PM
widia.com
Separator™
Technical Information
Figure 1
Standard bar capacity shown
Figure 2
Larger bar diameter shown
Figure 3
Modied toolholder with larger bar diameter shown
X
Aº
normal max DOC
extended max DOC
additional
clearance cut
max DOC
max diameter
solid bar
Modifications for Increased Depth of Cut
Capacity Chart for 76,2mm Diameter Bar Capacity Tooling
bar diameter 88,90 101,60 114,30 127,00 152,40 NOTE
max DOC
28,45 25,40 22,35 19,81 17,53 with no modification on toolholder
36,58 34,80 33,27 31,75 28,45 with no modification on toolholder
X = 10,16mm A = 1270mm
Capacity Chart for 57,15mm Diameter Bar Capacity Tooling
bar diameter 63,50 76,20 88,90 101,60 114,30 127,00 152,40 NOTE
max DOC
23,88 19,05 15,75 14,22 12,70 11,94 11,18 with no modification on toolholder
28,45 26,16 24,64 24,64 22,10 21,34 19,81 with no modification on toolholder
X = 10,16mm A = 1270mm
LViWID M 16 T i Th di F000 F001 M i REBRAND D b 14 2015 2 39 PM
WID_Master16_Turning_Threading_F000_F001_Metric_REBRAND.indd 2 12/14/15 2:42 PM
LViWID M 16 T i Th di F000 F001 M i REBRANDD b 14 20152 39PM
widia.com F1
Turning • Threading
Threading Application Guide ............................................................................................................................... F2–F3
TopThread ........................................................................................................................................................... F4–F37
Laydown Threading .......................................................................................................................................... F38–F78
Technical Information .................................................................................................................................... F79–F101
WID_Master16_Turning_Threading_F000_F001_Metric_REBRAND.indd 2 12/14/15 2:42 PM
F2
LViWID M 16 T i Th di F002 F003 M i REBRAND O b 15 2015 10 49 AM
widia.com
TopThread
Internal Threading
Boring Bar Diameters:
• Metric — 10–50mm
• Minimum bore —11,5mm
• Steel
Cresting (Full Profi le):
UN 16–8 TPI
ISO 1,5–3,0mm pitch
60° Partial Profi le — Flat Top
(NT-1L, NTF, and NTK):
UN 24–4.5 TPI
ISO 1,0–5,5mm pitch
TopThread
External Threading
Square Shank Toolholder Sizes:
• Metric — 10–32mm
Cresting (Full Profi le):
UN TPI of 32–7
ISO 1,5–3,0mm pitch
60° Partial Profi le — Flat Top
(NTF and NTK):
UN 44–4.5 TPI
ISO 0,6–5,5mm pitch
Threading Application Guide
TopThread™ Threading
WID_Master16_Turning_Threading_F002_F003_Metric_REBRAND.indd 2 10/30/15 3:33 PM
F3
LViWID M 16 T i Th di F002 F003 M i REBRANDO b 15 201510 49AM
widia.com
Laydown
External Threading
Square Shank Toolholder Sizes:
• Metric — 8–40mm
Cresting (Full Profi le):
UN 48–8 TPI
ISO 0,5–5,0mm pitch
60° Partial Profi le:
UN 48–4 TPI
ISO 0,5–6,0mm pitch
Threading Application Guide
Laydown Threading
Laydown
Internal Threading
Boring Bar Diameters:
• Metric — 12–50mm
• Minimum bore — (13mm)
• Steel and carbide
Cresting (Full Profi le)
and Partial Profi le:
UN 48–8 TPI
ISO 0,5–5,0mm pitch
60° Partial Profi le:
UN 48–4 TPI
ISO 0,5–6,0mm pitch
55° Partial Profi le:
UN 48–5 TPI
ISO 0,5–5,0mm pitch
WID_Master16_Turning_Threading_F002_F003_Metric_REBRAND.indd 3 10/30/15 3:33 PM
F4
LViWID M 16 T i Th di F004 F005 M i REBRAND N b 11 2015 4 45 PM
widia.com
High heat and high edge line load concentrated to a small nose radius,
combined with high feed rates, places high demands on carbide threading
inserts. The WIDIA TopThread system is the best solution for these problems.
The WIDIA TopThread system is the superior choice for high-demand
applications like machining Acme, Buttress, and API threads.
TopThread Insert Technology
TopThread insert technology brings superior chip control to your threading
operations. Unlike competitors’ designs, the WIDIA recessed chip groove, when
used according to our recommendations, will control the chip in most applications,
bringing you better tool life and lower cutting pressures.
• Reduced inconsistencies and better workpiece fi nish.
• Superior chip control reduces the danger to operators.
• Increased productivity in all of your threading operations.
• Excellent choice for special thread forms and toolholder designs.
TopThread
WIDIA™ TopThread™
WID_Master16_Turning_Threading_F004_F005_Metric_REBRAND.indd 4 11/11/15 5:39 PM
F5
LViWID M 16 T i Th di F004 F005 M i REBRANDN b 11 20154 45PM
widia.com
The Simple Solution
With the WIDIA™ TopThread solution, there is no need to worry about costly setup
mistakes. TopThread insert selection is easy, quick, and enables accurate indexing to
keep your machine spindle turning.
• Rigid design for increased insert stability during threading applications.
• Good quality threads, improved tool life, and improved surface fi nishes.
• Locking forces in three directions for superior resistance to tangential force.
• Unique 3° insert relief angle for back clearance.
• Available in partial profi le inserts for 60° thread forms.
TopThread™ inserts
are available in TN6010™
and TN6025™ grades to
withstand the demands
placed on the cutting edge
of the threading insert.
The versatility of the TopThread
steel enables you to use both
threading and grooving inserts in
the same toolholder.
NOTE: Holders are designed to locate inserts
inclined to 3° to provide back clearance
down open side.
WID_Master16_Turning_Threading_F004_F005_Metric_REBRAND.indd 5 11/11/15 5:39 PM
F6
LViWID M 16 T i Th di F006 F007 M i REBRAND N b 11 2015 4 50 PM
widia.com
catalogue
number
gage
insert
NSR-163D N.3R
NSR-164D N.4R
Feed direction away from the chuck
R
L
LL
RR
RR
L
LL
R
external right-hand thread external left-hand thread internal right-hand thread internal left-hand thread
Feed direction toward the chuck • RECOMMENDED
L
LLR
RR
LR
L
RL
R
external left-hand thread external right-hand thread internal left-hand thread internal right-hand thread
Step 1 • Select Threading Method and Hand of Tooling
Step 2 • Select Holder from Catalogue Page
Required Information:
• External/internal operation.
• Minimum bore diameter (for internal operations).
• Hand of tool.
• Insert size (gage insert).
TopThread™
Threading Selection Guide
NOTE: TopThread toolholders and boring bars are listed with a gage insert to
indicate the size and hand required. They are compatible with
both grooving and threading inserts of the same size.
NOTE: Optimise your threading operation by using the proper infeed method
and the recommended infeed values.
See the Technical section on pages F79–F101 of this catalogue.
For internal threading, minimum bore varies depending on thread type.
See page F92 for details.
The insert size must match the gage insert size of your toolholder selection:
Required Information:
• External/internal operation.
• Spindle rotation/hand of thread.
• Feed direction.
L R L R L R
hand of thread hand of toolholder hand of insert
Select the appropriate holder for the insert size and hand:
WID_Master16_Turning_Threading_F006_F007_Metric_REBRAND.indd 6 11/11/15 5:39 PM
F7
LViWID M 16 T i Th di F006 F007 M i REBRANDN b 11 20154 50PM
widia.com
TopThread™
Threading Selection Guide
insert
size
catalogue
number TN6025 TN6010
2NT-2RK
3NT-3RK
4NT-4RK
Step 3 • Choose Insert for Application
Step 4 • Select Grade and Speed
• See threading insert overview on page F8.
• Select cresting inserts for fully controlled thread form including
diameter control. Cresting inserts eliminate the need for deburring.
• Non-cresting partial pro le inserts can cut a variety of thread pitches.
• Note insert size for toolholder selection.
Recommendations for Grade and Speed Selection — m/min
Examples:
Chip Control: NT-K or NT-CK (partial profi le only)
Neutral: NT, NT-C, NTF, NTC, NJ, NJF,
NDC-V, NA, NDC, NTB-A/B
Positive: NTP, NTK, NJP, NJK
TopThread Threading Example:
application: 8 TPI Acme internal
right-hand thread
material: alloy steel
workpiece diameter: 114,3mm
good cutting conditions
feed towards the chuck
Recommendation:
insert: NA3L8
grade: TN6010
insert size: 3
boring bar: A40NER3
gage insert: N.3L
speed: 150 m/min
infeed passes*: 12 passes
* Infeed recommendations provided in technical data section on pages F88–F91.
workpiece
material steel stainless steel cast iron non-ferrous metals high-temp alloys
insert style chip control
or neutral chip control
or positive neutral positive positive
optimum cutting
conditions
TN6010
160–750 TN6010
160–600 TN6010
230–700 –TN6010
65–400
rst choice TN6025
130–650 TN6025
130–450 TN6025
200–475 TN6025
160–1150 TN6025
35–330
WID_Master16_Turning_Threading_F006_F007_Metric_REBRAND.indd 7 11/11/15 5:39 PM
F8
LViWID M 16 T i Th di F008 F009 M i REBRAND N b 11 2015 8 22 AM
widia.com
TopThread™
Insert Overview
style
thread
profi le standard
tolerance
class cresting application page(s)
chip
control — K neutral positive
NT-K NT NTP Partial Pro le 60° – – N
General use for 60° thread forms,
such as ISO and UN, where
non-cresting inserts are desired to
cut a variety of pitches.
F13–F15
NT-CK Partial Pro le 60°
— coarse pitch ––N
Coarse pitch 60° thread forms, such
as ISO and UN, where non-cresting
inserts are desired to cut a variety
of pitches.
F15
NTF NTK Partial Pro le 60°
— ne pitch ––N
Fine pitch 60° thread forms, such
as ISO and UN, where non-cresting
inserts are desired to cut a variety
of pitches — able to thread close
to shoulders.
F16
NTC American UN ANSI
B1.1:74 2A/2B Y Widely used inch-based 60° V-form
for all industries. F17
NJP UNJ SAEA588791 3A/3B N
Controlled root radius on external
threads for military and aerospace
industries.
F18
NJK UNJ —
ne pitch SAEA588790 3A/3B N
Controlled root radius on external
threads for military and aerospace
industries — able to thread close
to shoulders.
F18
NDC-V NPT ANSI/ACME
B1.201:
1983
Standard
NPT YNational Pipe Thread standard forms
for pipe ttings. F18
NDC-V-M NPT —
multi-tooth
ANSI/ACME
B1.201:
1983
Standard
NPT YHigh-productivity multi-tooth threading
inserts for NPT threads. F19
NWC-E Whitworth,
BSW, BSP
BS 84:1956,
ISO 228/1:
1982,
DIN 259
Medium
Class A YWidely used 55° form for gas and
water connections. F19
NDC-RD API Round API STD.
5B:1979 Standard
API RD Y
60° V-form with large radius for casing,
tubing, and line pipe in the oil and
gas industry, including 8 and
10 round forms.
F20
NA Acme ANSI
B1.5:1988 3G N
29° truncated thread form for motion
applications in a wide variety
of industries.
F21
NAS Stub Acme ANSI
B1.8:1988 2G N
Shallow depth 29° truncated thread
form for motion applications in a wide
variety of industries.
F22
NTB-B
American Buttress
— 45° clearance
ank leading (Pull)
ANSI
B1.9:1973 Class 2 N
Sawtooth form for axial load bearing
applications in a variety of industries —
use the “B” style when the 45°
clearance ank is the leading ank.
F22
WID_Master16_Turning_Threading_F008_F009_Metric_REBRAND.indd 8 11/11/15 9:28 AM
F9
LViWID M 16 T i Th di F008 F009 M i REBRANDN b 11 20158 22AM
widia.com
Coatings provide high-speed
capability and are engineered
for fi nishing to light roughing.
Grade
TopThread™
Grades and Grade Descriptions
PSteel
MStainless Steel
KCast Iron
NNon-Ferrous
SHigh-Temp Alloys
HHardened Materials
• Reduce cycle times — high speed capability.
• Longer tool life — new multilayer coating
provides better wear resistance.
TN6010
An advanced PVD TiAlN coating over a very deformation-resistant unalloyed carbide
substrate. TN6010 is ideal for nishing to general machining of most workpiece
materials at higher speeds. Excellent for machining most steels, stainless steels, cast
irons, non-ferrous materials, and super alloys under stable conditions. It also performs
well in machining hardened and short chipping materials.
P
M
K
N
S
HC-P10 H
left-hand insert right-hand insert
wear
resistance toughness
Coating Grade Description 05 10 15 20 25 30 35 40 45
• All TopThread inserts are precision-ground to
provide accurate edge location and secure
locking of the insert in the toolholder pocket.
• TopThread inserts can be used in either
toolholders or boring bars.
• All non-cresting-type threading inserts can be
used for either external or internal applications.
All cresting-type inserts are designated
speci cally for external or internal use.
• Right-hand TopThread toolholders use
right-hand inserts. Left-hand TopThread
toolholders use left-hand inserts.
• Right-hand TopThread boring bars
use left-hand inserts. Left-hand TopThread
boring bars use right-hand inserts.
• See this page for carbide grade selection
and more technical information.
TN6025
An advanced PVD TiAlN-coated grade with a tough, ultra- ne-grain unalloyed
substrate. For general-purpose machining of most steels, stainless steels,
high-temp alloys, titanium, irons, and non-ferrous materials. Speeds may vary
from low to medium and will handle interruptions and high feed rates.
P
M
K
N
S
HC-P25
THM
Uncoated carbide for light and medium machining. For cast iron, all non-ferrous
metals, and non-metals. Also capable of machining hardened materials at low
cutting speeds.
K
N
S
HW-K15
WID_Master16_Turning_Threading_F008_F009_Metric_REBRAND.indd 9 11/11/15 9:28 AM
F10
LViWID M 16 T i Th di F010 F011 M i REBRAND O b 30 2015 8 23 AM
widia.com
TopThread
Insert Identifi cation System
TopThread™
Catalogue Numbering System
NDC38RDR75
N D C 3 8RD R 75
Type
of Insert
Insert Additional
Information
Insert
Size
Industry Thread
Identifi cation
Hand
of Insert
Defi nition
of Insert
Additional
Information
N— TopThread
™
B— Buttress Indicates API or
drilling industry
form designation
(e.g., 10RD,
8RD, .038)
or
controlled root
radius threading
inserts indicate the
root radius in 0,025
increments (NJ,
NJF, NJP, NJK)
or
M indicates metric
ISO thread
R— Right Hand
F— Fine pitch L— Left Hand
S— Stub Acme
C— Cresting
P— Positive rake
K— Fine pitch, positive
• Threads per inch
or pitch (for metric)
• “A” or “B” type
Buttress insert
• Taper per foot —
API threads
A— Acme
D— API or NPT
J— UNJ thread I— Internal thread
T— 60° V thread E— External thread (used only if
internal and external thread
forms are different)
W— 55° V Whitworth M— Multiple tooth
K— Standard chip control
C— Coarse pitch
D— Dryseal
T
TopThread insert dimensions
AT
insert size mm mm
1 2,54 2,54
2 5,56 3,81
3 8,74 4,95
4 11,51 6,48
5 17,48 9,65
6 11,51 9,73
8 7,93 11,13
NJF NDC-V-M NTC
NA NT NT-K
WID_Master16_Turning_Threading_F010_F011_Metric_REBRAND.indd 10 10/30/15 3:34 PM
F11
LViWID M 16 T i Th di F010 F011 M i REBRANDO b 30 20158 23AM
widia.com
TopThread™
Recommended Cutting Speeds • Metric
Cutting Speed — vc
m/min
TN6010 TN6025 THM
Material
Group min Start max min Start max min Start max
P
0/1 140 175 210 130 140 150 90 95 100
2115 145 175 110 145 175 75 100 125
3115 145 175 110 145 175 75 100 125
475 100 120 75 95 115 55 65 80
5105 140 170 100 125 145 70 85 100
645 60 75 40 55 65 30 40 45
M
190 115 140 60 75 90 60 75 90
255 70 90 40 50 55 50 60 75
360 80 95 40 50 60 40 50 55
K
1120 150 180 60 80 90 70 90 100
2120 150 180 60 75 85 50 65 80
3110 140 170 60 75 90 60 70 80
N
1600 750 900 600 750 900 600 750 900
2535 685 835 535 685 835 500 650 800
3230 300 370 230 300 370 600 750 900
4135 180 225 135 180 225 500 650 800
570 90 110 70 90 110 230 300 370
6445 565 690 445 565 690 150 200 250
7550 700 850 550 700 850 150 200 250
S
135 40 50 25 35 40 25 35 45
220 20 30 15 20 20 20 30 35
360 70 80 40 60 70 15 25 30
430 35 45 20 30 35 10 15 20
H
115 30 60 – –––––
215 30 60 – –––––
315 30 60 – –––––
415 30 60––––––
WID_Master16_Turning_Threading_F010_F011_Metric_REBRAND.indd 11 10/30/15 3:34 PM
LViWID M 16 T i Th di F012 F013 M i REBRAND N b 11 2015 4 59 PM
The best solution
for demanding
threading
applications
The WIDIA™ TopThread system is the best solution for demanding threading
applications. With unmatched tooling technology, you can trust WIDIA TopThread
tools for all of your threading and grooving needs.
• Large selection of insert geometries and grades.
• Rigid insert clamping design ensures the best tool life, surface fi nish, and workpiece quality.
• Ensures accurate, high-quality threads. Excellent for internal threading operations.
To learn more, contact your local Authorised Distributor or visit widia.com.
WID_Master16_Turning_Threading_F012_F013_Metric_REBRAND.indd 12 11/11/15 5:39 PM
widia.com F13
LViWID M 16 T i Th di F012 F013 M i REBRANDN b 11 20154 59PM
TopThread™
Threading Inserts
NT-K
catalogue number RC E
insert
size
external thread
pitch mm
internal thread
pitch mm
external
TPI
internal
TPI
TN6010
TN6025
THM
right hand
NT2RK 0,10 1,91 2 0,70-3,0 1,25-3,5 8-36 7-20
3607651
3607837
–
NT3RK 0,17 2,49 3 1,25-4,0 2,0-5,0 6-20 5-12
3607643
3607824
–
NT4RK 0,17 3,25 4 1,25-6,25 2,0-6,25 4-20 4-12
–
3607846
–
left hand
NT2LK 0,10 1,91 2 0,70-3,0 1,25-3,5 8-36 7-20
3607674
3607833
–
NT3LK 0,17 2,49 3 1,25-4,0 2,0-5,0 6-20 5-12
3607645
3607828
–
Partial Prole 60°
rst choice
alternate choice
Threading
NT-1L
catalogue number RC E
insert
size
external thread
pitch mm
internal thread
pitch mm
external
TPI
internal
TPI
TN6010
TN6025
THM
left hand
NT1L 0,08 1,09 1 — 1,0-2,0 — 12-24
3636551
3636555
–
Partial Prole 60°
Internal
P
M
K
N
S
H
WID_Master16_Turning_Threading_F012_F013_Metric_REBRAND.indd 13 11/11/15 5:40 PM
F14
LViWID M 16 T i Th di F014 F015 M i REBRAND O b 15 2015 10 50 AM
widia.com
TopThread™
Threading Inserts
NT
catalogue number RC E
insert
size
external thread
pitch mm
internal thread
pitch mm
external
TPI
internal
TPI
TN6010
TN6025
THM
right hand
NT2R 0,10 1,90 2 0,70-3,0 1,25-3,5 8-36 7-20
3607647
3607843
–
NT3R 0,17 2,49 3 1,25-4,0 2,0-5,0 6-20 5-12
3607530
3607825
–
NT4R 0,17 3,25 4 1,25-6,25 2,0-6,25 4-20 4-12
3607676
3607834
–
left hand
NT2L 0,10 1,90 2 0,70-3,0 1,25-3,5 8-36 7-20
3607675
3607835
–
NT3L 0,17 2,49 3 1,25-4,0 2,0-5,0 6-20 5-12
3607532
3607826
–
NT4L 0,17 3,25 4 1,25-6,25 2,0-6,25 4-20 4-12
–
3607849
–
Threading
60°
60°
Partial Prole 60°
rst choice
alternate choice
P
M
K
N
S
H
WID_Master16_Turning_Threading_F014_F015_Metric_REBRAND.indd 14 10/30/15 3:34 PM
F15
LViWID M 16 T i Th di F014 F015 M i REBRANDO b 15 201510 50AM
widia.com
TopThread™
Threading Inserts
NTP
catalogue number RC E
insert
size
external thread
pitch mm
internal thread
pitch mm
external
TPI
internal
TPI
TN6010
TN6025
THM
right hand
NTP2R 0,10 1,91 2 0,70-3,0 1,25-3,5 8-36 7-20
3607677
3607841
–
NTP3R 0,17 2,49 3 1,25-4,0 2,0-5,0 6-20 5-12
3607644
3607823
–
NTP4R 0,17 3,25 4 1,25-6,25 2,0-6,25 4-20 4-12
–
3607839
–
left hand
NTP2L 0,10 1,91 2 0,70-3,0 1,25-3,5 8-36 7-20
3607678
3607840
–
NTP3L 0,17 2,49 3 1,25-4,0 2,0-5,0 6-20 5-12
3607650
3607831
–
60°
60°
Partial Prole 60°
rst choice
alternate choice
Threading
NT-CK
60°
60°
Partial Prole 60°
catalogue number RC E
insert
size
external thread
pitch mm
internal thread
pitch mm
external
TPI
internal
TPI
TN6010
TN6025
THM
right hand
NT3RCK 0,34 2,46 3 2,5-4,0 4,0 6-11 6
3607649
3607838
–
P
M
K
N
S
H
WID_Master16_Turning_Threading_F014_F015_Metric_REBRAND.indd 15 10/30/15 3:34 PM
F16
LViWID M 16 T i Th di F016 F017 M i REBRAND O b 15 2015 10 51 AM
widia.com
TopThread™
Threading Inserts
NTF
catalogue number RC E
insert
size
external thread
pitch mm
internal thread
pitch mm
external
TPI
internal
TPI
TN6010
TN6025
THM
right hand
NTF2R 0,08 2,79 2 0,60-1,75 1,0-2,0 14-44 12-24
3607673
3607852
–
NTF3R 0,08 3,58 3 0,60-2,5 1,0-2,5 10-44 9-24
3607531
3607830
–
left hand
NTF3L 0,08 3,58 3 0,60-2,5 1,0-2,5 10-44 9-24
3607652
3607832
–
Threading
60°
60°
Partial Prole 60°
rst choice
alternate choice
NTK
catalogue number RC E
insert
size
external thread
pitch mm
internal thread
pitch mm
external
TPI
internal
TPI
TN6010
TN6025
THM
right hand
NTK2R 0,08 2,79 2 0,60-1,75 1,0-2,0 14-44 12-24
3607646
3607836
–
NTK3R 0,08 3,58 3 0,60-2,50 1,0-2,5 10-44 9-24
3607528
3607827
–
left hand
NTK3L 0,08 3,58 3 0,60-2,50 1,0-2,5 10-44 9-24
–
3607853
–
60°
60°
Partial Prole 60°
P
M
K
N
S
H
WID_Master16_Turning_Threading_F016_F017_Metric_REBRAND.indd 16 10/30/15 3:35 PM
F17
LViWID M 16 T i Th di F016 F017 M i REBRANDO b 15 201510 51AM
widia.com
TopThread™
Threading Inserts
NTC-E
catalogue number RC E
insert
size
external thread
pitch mm
internal thread
pitch mm
external
TPI
internal
TPI
TN6010
TN6025
THM
right hand
NTC3R16E 0,19 3,76 3 — — 16 —
3636553
3636557
–
NTC3R14E 0,22 3,76 3 — — 14 —
3636554
–
–
NTC3R12E 0,25 3,76 3 — — 12 —
3636549
3636562
–
60°
1/8P
American
UN-External
rst choice
alternate choice
Threading
NTC-I
catalogue number RC E
insert
size
external thread
pitch mm
internal thread
pitch mm
external
TPI
internal
TPI
TN6010
TN6025
THM
left hand
NTC3L12I 0,10 3,76 3 — — — 12
–
3636556
–
60°
1/4P
American
UN-Internal
P
M
K
N
S
H
WID_Master16_Turning_Threading_F016_F017_Metric_REBRAND.indd 17 10/30/15 3:35 PM
F18
LViWID M 16 T i Th di F018 F019 M i REBRAND O b 15 2015 10 51 AM
widia.com
TopThread™
Threading Inserts
NJP
catalogue number RC E
insert
size
external thread
pitch mm
internal thread
pitch mm
external
TPI
internal
TPI
TN6010
TN6025
THM
right hand
NJP3014R12 0,33 2,49 3 — — 12 —
–
3607850
–
Threading
UNJ External
rst choice
alternate choice
NJK
catalogue number RC E
insert
size
external thread
pitch mm
internal thread
pitch mm
external
TPI
internal
TPI
TN6010
TN6025
THM
right hand
NJK3008R20 0,20 3,58 3 — — 20 —
3607648
–
–
UNJ External
NDC-V
catalogue number RC E
insert
size TPI TPF
TN6010
TN6025
THM
right hand
NDC3115VR75 0,10 3,66 3 11.5 .750
3636550
–
–
30°
90°1°47'
30°
NPT
P
M
K
N
S
H
WID_Master16_Turning_Threading_F018_F019_Metric_REBRAND.indd 18 10/30/15 3:35 PM
widia.com F19
LViWID M 16 T i Th di F018 F019 M i REBRANDO b 15 201510 51AM
TopThread™
Threading Inserts
NDC-V-M
catalogue number RC E
insert
size TPI TPF
TN6010
TN6025
THM
right hand
NDC8115VR75M 0,10 2,59 8 11.5 .750
3636552
–
–
NDC88VR75M 0,13 2,41 8 8 .750
3636548
–
–
Threading
30°
90°1°47'
30°
NPT
rst choice
alternate choice
NWC-E
catalogue number RC E
insert
size TPI TPF
TN6010
TN6025
THM
right hand
NWC3R14E 0,24 3,43 3 14 —
–
3811638
–
NWC3R11E 0,30 3,43 3 11 —
–
3811639
–
55°
0,1373P
Whitworth BSW,
BSP-External
P
M
K
N
S
H
WID_Master16_Turning_Threading_F018_F019_Metric_REBRAND.indd 19 10/30/15 3:35 PM
F20
LViWID M 16 T i Th di F020 F021 M i REBRAND O b 15 2015 10 51 AM
widia.com
TopThread™
Threading Inserts
NDC-RD
catalogue number RC E
insert
size TPI TPF
TN6010
TN6025
THM
right hand
NDC38RDR75 0,43 3,18 3 8 .750
–
3636558
–
left hand
NDC310RDL75 0,36 3,18 3 10 .750
–
3636565
–
NDC38RDL75 0,43 3,18 3 8 .750
–
3636559
–
Threading
30°
90°
30°
1°47´
API Round
rst choice
alternate choice
P
M
K
N
S
H
WID_Master16_Turning_Threading_F020_F021_Metric_REBRAND.indd 20 10/30/15 3:35 PM
F21
LViWID M 16 T i Th di F020 F021 M i REBRANDO b 15 201510 51AM
widia.com
TopThread™
Threading Inserts
NA
catalogue number CF E
insert
size TPI
TN6010
TN6025
THM
right hand
NA3R8 1,04 3,79 3 8
–
3607854
–
NA3R6 1,44 3,79 3 6
–
3607851
–
NA3R4 2,22 3,38 3 4
–
3607848
–
NA4R4 2,22 5,13 4 4
–
3636566
–
NA6R3 3,01 7,19 6 3
–
3636564
–
NA6R2 4,58 7,19 6 2
–
3636567
–
left hand
NA3L8 1,04 3,79 3 8
–
3607855
–
NA3L6 1,44 3,79 3 6
–
3607847
–
NA3L4 2,22 3,38 3 4
–
3607842
–
NA4L4 2,22 5,13 4 4
–
3636560
–
NA6L3 3,01 7,19 6 3
–
3636561
–
NA6L2 4,58 7,19 6 2
–
3636568
–
29°
29°
ACME
rst choice
alternate choice
Threading
P
M
K
N
S
H
WID_Master16_Turning_Threading_F020_F021_Metric_REBRAND.indd 21 10/30/15 3:35 PM
widia.com
F22
LViWID M 16 T i Th di F022 F023 M i REBRAND O b 15 2015 10 52 AM
TopThread™
Threading Inserts
NAS
catalogue number CF E
insert
size TPI
TN6010
TN6025
THM
right hand
NAS3R8 1,21 3,79 3 8
–
3607856
–
left hand
NAS3L12 0,83 3,79 3 12
–
3607844
–
NAS3L8 1,21 3,79 3 8
–
3607845
–
NAS3L6 1,66 3,79 3 6
–
3607829
–
Threading
29°
29°
Stub ACME
rst choice
alternate choice
NTB-B
catalogue number RC E
insert
size TPI TPF
TN6010
TN6025
THM
left hand
NTB3LB 0,17 0,31 3 8-16 —
–
3636563
–
7°
45°
American
Buttress-Pull
P
M
K
N
S
H
WID_Master16_Turning_Threading_F022_F023_Metric_REBRAND.indd 22 10/30/15 3:35 PM
widia.com F23
LViWID M 16 T i Th di F022 F023 M i REBRANDO b 15 201510 52AM
NSR2525M4
W1
N S R 2525 M 4
Insert
Holding
Method
Insert
Mounting
Location
Hand
of Tool
Drop
Head
Shank
Size
Tool
Length
Insert
Size
Qualifi ed
Holder
N —
TopThread
™
End mount
Shank height and
width in mm and
holder
Q — Quali ed
holder
Side mount,
offset
Side mount,
no offset
End mount
Side mount
E
S
AS
DH
L1 ISO
32 A
40 B
50 C
60 D
70 E
80 F
90 G
100 H
110 J
125 K
140 L
150 M
160 N
170 P
180 Q
200 R
250 S
300 T
350 U
400 V
450 W
500 Y
special
length
x
insert
size W1
2 3,81
3 4,95
4 6,98
5 9,65
6 9,73
8 11,13
TopThread™
Catalogue Numbering System
RL
RL
TopThread
Holder Identifi cation System
WID_Master16_Turning_Threading_F022_F023_Metric_REBRAND.indd 23 10/30/15 3:35 PM
F24
LViWID M 16 T i Th di F024 F025 M i REBRAND N b 13 2015 3 32 PM
widia.com
TopThread™
Toolholders
NS
NOTE: F dimension measured over sharp point of insert.
order number catalogue number
seat
size H B F L1 L2 B4 CD
gage
insert clamp
clamp
screw
clamp
screw
hex/
Torx Plus
right hand
3632147 NSR062 2 10 10 14 64 19 9 3,5 N.2R CM74 S310 — 7/64
3641682 NSR1010E2 2 10 10 14 70 19 9 3,5 N.2R CM74 MS1200 — T10
3641660 NSR1212F2 2 12 12 16 80 19 9 3,5 N.2R CM74 MS1200 — T10
3639035 NSR082V 2 13 13 19 89 19 9 3,5 N.2R CM74 S310 — 7/64
3639044 NSR102B 2 16 16 22 114 19 9 3,5 N.2R CM74 S310 — 7/64
3636542 NSR1616H2 2 16 16 20 100 19 9 3,5 N.2R CM74 MS1200 — T10
3639026 NSR122B 2 19 19 25 114 19 9 3,5 N.2R CM74 S310 — 7/64
3638589 NSR2020K2 2 20 20 25 125 19 9 3,5 N.2R CM74 MS1200 — T10
3638590 NSR2525M2 2 25 25 32 150 19 9 3,5 N.2R CM74 MS1200 — T10
3639025 NSR162C 2 25 25 32 127 19 9 3,5 N.2R CM74 S310 — 7/64
3639027 NSR123A 3 19 19 25 102 32 13 5,3 N.3R CM72LP — S2112 25 IP
3639023 NSR123B 3 19 19 25 114 32 13 5,3 N.3R CM72LP — S2112 25 IP
3638588 NSR2020K3 3 20 20 25 125 32 13 5,3 N.3R CM72LP — MS2111 25 IP
3636536 NSR2525M3 3 25 25 32 150 32 13 5,3 N.3R CM72LP — MS2111 25 IP
3638592 NSR163C 3 25 25 32 127 32 13 5,3 N.3R CM72LP — S2112 25 IP
3638591 NSR163D 3 25 25 32 152 32 13 5,3 N.3R CM72LP — S2112 25 IP
3637496 NSR853D 3 32 25 32 152 32 13 5,3 N.3R CM72LP — S2112 25 IP
3639028 NSR203D 3 32 32 38 152 32 13 5,3 N.3R CM72LP — S2112 25 IP
3641664 NSR3225P3 3 32 25 32 170 32 13 5,3 N.3R CM72LP — MS2111 25 IP
3641666 NSR3232P3 3 32 32 40 170 32 13 5,3 N.3R CM72LP — MS2111 25 IP
3637506 NSR243D 3 38 38 51 152 35 13 5,3 N.3R CM72LP — S2112 25 IP
3637535 NSR243E 3 38 38 51 178 35 13 5,3 N.3R CM72LP — S2112 25 IP
3636540 NSR2525M4 4 25 25 32 150 35 14 7,5 N.4R CM72LP — MS2111 25 IP
3641675 NSR3225P4 4 32 25 32 170 35 14 7,5 N.4R CM72LP — MS2111 25 IP
3641669 NSR3232P4 4 32 32 40 170 35 14 7,5 N.4R CM72LP — MS2111 25 IP
3637509 NSR205D 532
32 38 152 51 15 10,5 N.5R CM80 S352 — 1/4
3637540 NSR245D 5 38 38 51 152 51 16 10,5 N.5R CM80 S352 — 1/4
Threading
Right Hand Tool
See page F8
for inserts.
(continued)
WID_Master16_Turning_Threading_F024_F025_Metric_REBRAND.indd 24 11/13/15 4:27 PM
F25
LViWID M 16 T i Th di F024 F025 M i REBRANDN b 13 20153 32PM
widia.com
TopThread™
Toolholders
NOTE: F dimension measured over sharp point of insert.
order number catalogue number
seat
size H B F L1 L2 B4 CD
gage
insert clamp
clamp
screw
clamp
screw
hex/
Torx Plus
left hand
3632161 NSL062 2 10 10 14 64 19 9 3,5 N.2L CM75 S310 — 7/64
3641683 NSL1010E2 2 10 10 14 70 19 9 3,5 N.2L CM75 MS1200 — T10
3641681 NSL1212F2 2 12 12 16 80 19 9 3,5 N.2L CM75 MS1200 — T10
3637485 NSL082V 2 13 13 19 89 19 9 3,5 N.2L CM75 S310 — 7/64
3637510 NSL102B 2 16 16 22 114 19 9 3,5 N.2L CM75 S310 — 7/64
3636545 NSL1616H2 2 16 16 20 100 19 9 3,5 N.2L CM75 MS1200 — T10
3632145 NSL122B 2 19 19 25 114 19 9 3,5 N.2L CM75 S310 — 7/64
3639045 NSL2020K2 2 20 20 25 125 19 9 3,5 N.2L CM75 MS1200 — T10
3639047 NSL2525M2 2 25 25 32 150 19 9 3,5 N.2L CM75 MS1200 — T10
3632138 NSL162C 2 25 25 32 127 19 9 3,5 N.2L CM75 S310 — 7/64
3632152 NSL123A 3 19 19 25 102 32 13 5,3 N.3L CM73LP — S2112 25 IP
3639032 NSL123B 3 19 19 25 114 32 13 5,3 N.3L CM73LP — S2112 25 IP
3639046 NSL2020K3 3 20 20 32 125 32 13 5,3 N.3L CM73LP — MS2111 25 IP
3636539 NSL2525M3 3 25 25 32 150 32 13 5,3 N.3L CM73LP — MS2111 25 IP
3639029 NSL163C 3 25 25 32 127 32 13 5,3 N.3L CM73LP — S2112 25 IP
3639024 NSL163D 3 25 25 32 152 32 13 5,3 N.3L CM73LP — S2112 25 IP
3637508 NSL853D 3 32 25 32 152 32 13 5,3 N.3L CM73LP — S2112 25 IP
3639037 NSL203D 3 32 32 38 152 32 13 5,3 N.3L CM73LP — S2112 25 IP
3641670 NSL3225P3 3 32 25 32 170 32 13 5,3 N.3L CM73LP — MS2111 25 IP
3641671 NSL3232P3 3 32 32 40 170 32 13 5,3 N.3L CM73LP — MS2111 25 IP
3637515 NSL243D 3 38 38 51 152 35 13 5,3 N.3L CM73LP — S2112 25 IP
3637548 NSL243E 3 38 38 51 178 35 13 5,3 N.3L CM73LP — S2112 25 IP
3636544 NSL2525M4 4 25 25 32 150 35 14 7,5 N.4L CM73LP — MS2111 25 IP
3641678 NSL3225P4 4 32 25 32 170 35 14 7,5 N.4L CM73LP — MS2111 25 IP
3641679 NSL3232P4 4 32 32 40 170 35 14 7,5 N.4L CM73LP — MS2111 25 IP
3637536 NSL205D 532
32 38 152 51 15 10,5 N.5L CM81 S352 — 1/4
3641688 NSL3232P5 5 32 32 40 170 51 16 10,5 N.5L CM81 MS352 — 6 mm
Threading
(NS — continued)
WID_Master16_Turning_Threading_F024_F025_Metric_REBRAND.indd 25 11/13/15 4:27 PM
F26
LViWID M 16 T i Th di F026 F027 M i REBRAND N b 13 2015 3 38 PM
widia.com
TopThread™
Toolholders
NAS
NOTE: F dimension measured over sharp point of insert.
order number catalogue number
seat
size H B F L1 L2 B4 CD B3 L3
gage
insert clamp
clamp
screw
clamp
screw
hex/
Torx Plus
right hand
3641667 NASR1010M2Q 2 10 10 10 150 19 9 3,5 2,03 19 N.2R CM182 MS1200 — T10
3641662 NASR1212M2Q 2 12 12 12 150 19 9 3,5 — — N.2R CM182 MS1200 — T10
3639048 NASR1616K3Q 3 16 16 16 125 32 12 5,3 — — N.3R CM184LP — MS2111 25 IP
left hand
3641691 NASL1010M2Q 2 10 10 10 150 19 9 3,5 2,03 19 N.2L CM183 MS1200 — T10
3641686 NASL1212M2Q 2 12 12 12 150 19 9 3,5 — — N.2L CM183 MS1200 — T10
3641687 NASL1616K3Q 3 16 16 16 125 32 12 5,3 — — N.3L CM185LP — MS2111 25 IP
Threading
See page F8
for inserts.
Right Hand Tool
WID_Master16_Turning_Threading_F026_F027_Metric_REBRAND.indd 26 11/13/15 4:27 PM
F27
LViWID M 16 T i Th di F026 F027 M i REBRANDN b 13 20153 38PM
widia.com
TopThread™
Toolholders
NE
NOTE: F dimension measured over sharp point of insert.
order number catalogue number
seat
size H B F L1 L2 B4 CD
gage
insert clamp
clamp
screw
clamp
screw
hex/
Torx Plus
right hand
3641674 NER1616H2 2 16 16 20 100 15 — 3,5 N.2L CM75 MS1200 — T10
3641658 NER2020K2 2 20 20 25 125 15 6 3,5 N.2L CM75 MS1200 — T10
3641665 NER2525M2 2 25 25 32 150 15 12 3,5 N.2L CM75 MS1200 — T10
3636541 NER2525M3 3 25 25 32 150 22 — 5,3 N.3L CM73LP — MS2111 25 IP
3641680 NER3225P3 3 32 25 32 170 22 — 3,8 N.3L CM73LP — MS2111 25 IP
3641672 NER2525M4 4 25 25 35 150 24 — 7,5 N.4L CM73LP — MS2111 25 IP
3641689 NER3225P4 4 32 25 35 170 24 — 7,5 N.4L CM73LP — MS2111 25 IP
3641693 NER3232P4 4 32 32 40 170 24 — 6,4 N.4L CM73LP — MS2111 25 IP
3641692 NER3232P5 5 32 32 50 170 35 — 10,5 N.5L CM81 MS352 — 6 mm
left hand
3641684 NEL1616H2 2 16 16 20 100 15 — 3,5 N.2R CM74 MS1200 — T10
3641677 NEL2020K2 2 20 20 25 125 15 6 3,5 N.2R CM74 MS1200 — T10
3641676 NEL2525M2 2 25 25 32 150 15 12 3,5 N.2R CM74 MS1200 — T10
3636543 NEL2525M3 3 25 25 32 150 22 — 5,3 N.3R CM72LP — MS2111 25 IP
3641685 NEL3225P3 3 32 25 32 170 22 — 3,8 N.3R CM72LP — MS2111 25 IP
3641668 NEL2525M4 4 25 25 35 150 24 — 7,5 N.4R CM72LP — MS2111 25 IP
3641694 NEL3225P4 4 32 25 35 170 24 — 7,5 N.4R CM72LP — MS2111 25 IP
3641696 NEL3232P4 4 32 32 40 170 24 — 6,4 N.4R CM72LP — MS2111 25 IP
3641695 NEL3232P5 5 32 32 50 170 35 — 10,5 N.5R CM80 MS352 — 6 mm
Right Hand Tool
See page F8
for inserts.
Threading
WID_Master16_Turning_Threading_F026_F027_Metric_REBRAND.indd 27 11/13/15 4:27 PM
F28
LViWID M 16 T i Th di F028 F029 M i REBRAND O b 15 2015 10 52 AM
widia.com
TopThread™
KM™ Units
NE 93°
L1 F D min
order number catalogue number mm in mm in mm in
gage
insert clamp
clamp
screw kg lbs
right hand
3902285 KM40TSNER2 40 1.575 27 1.063 54 2.126 NG2L CM75 MS1488 0,30 .66
3902286 KM40TSNER3 40 1.575 27 1.063 54 2.126 NG3L CM73 MS1489 0,30 .67
3902287 KM40TSNER4 40 1.575 27 1.063 54 2.126 NG4L CM73 MS1489 0,30 .65
left hand
3902132 KM40TSNEL2 40 1.575 27 1.063 54 2.126 NG2R CM74 MS1488 0,30 .66
3902283 KM40TSNEL3 40 1.575 27 1.063 54 2.126 NG3R CM-72 MS1489 0,30 .67
3902284 KM40TSNEL4 40 1.575 27 1.063 54 2.126 NG4R CM-72 MS1489 0,30 .65
Threading
L1 F D min
WID_Master16_Turning_Threading_F028_F029_Metric_REBRAND.indd 28 10/30/15 3:36 PM
F29
LViWID M 16 T i Th di F028 F029 M i REBRANDO b 15 201510 52AM
widia.com
NR 45° L1 F D min
order number catalogue number mm in mm in mm in
gage
insert clamp
clamp
screw kg lbs
right hand
3902289 KM40TSNRR3045M 45 1.772 27 1.063 54 2.126 NU3L CM73 MS1489 0,34 .75
left hand
3902288 KM40TSNRL3045M 45 1.772 27 1.063 54 2.126 NU3R CM-72 MS1489 0,33 .74
TopThread™
KM™ Units
NS 93°
L1 F
order number catalogue number mm in mm in
gage
insert clamp
clamp
screw kg lbs
right hand
3902293 KM40TSNSR2 40 1.575 27 1.063 NG2R CM74 MS1488 0,32 .70
3902294 KM40TSNSR3 47 1.850 27 1.063 NG3R CM-72 MS1489 0,32 .71
3902295 KM40TSNSR4 47 1.850 27 1.063 NG4R CM-72 MS1489 0,30 .66
left hand
3902290 KM40TSNSL2 40 1.575 27 1.063 NG2L CM75 MS1488 0,32 .70
3902291 KM40TSNSL3 47 1.850 27 1.063 NG3L CM73 MS1489 0,33 .72
3902292 KM40TSNSL4 47 1.850 27 1.063 NG4L CM73 MS1489 0,30 .66
Threading
L1 F
L1 F D min
WID_Master16_Turning_Threading_F028_F029_Metric_REBRAND.indd 29 10/30/15 3:36 PM
widia.com
F30
LViWID M 16 T i Th di F030 F031 M i REBRAND N b 11 2015 5 01 PM
TopThread
Boring Bar Identifi cation System
Dia.
A25RNNTOR 2
Bar
Type
Bar
Diameter
Bar
Length
Insert
Holding
Method
Insert
Shape
Insert
Location
Rake
Angle
0 = 0°
Hand of Tool Insert
Size
Steel
with coolant
N —
TopThread*
End mount Right hand
Bar in millimetres
Side mount
Left hand
Bars
K = 125,0mm
M = 150,0mm
Q = 180,0mm
R = 200,0mm
S = 250,0mm
T = 300,0mm
U = 350,0mm
A
S
R
L
W1
insert
size W1
2 3,81
3 4,95
4 6,98
5 9,65
6 9,73
8 11,13
TopThread™
Catalogue Numbering System
Dia.
E
* Proprietary
standard only.
A25RNNT0R2
WID_Master16_Turning_Threading_F030_F031_Metric_REBRAND.indd 30 11/11/15 5:40 PM
widia.com F31
LViWID M 16 T i Th di F030 F031 M i REBRANDN b 11 20155 01PM
TopThread™
Boring Bars
A-NNT
NOTE: F dimension measured over sharp point of insert.
order number catalogue number
seat
size D D min L1 F CS
gage
insert clamp
clamp
screw
clamp
screw
hex/
Torx Plus
right hand
3641643 A16MNNTOR2 2 16 22,0 150 11 1/8-27 NPT N.2L CM75 MS1200 — 2.5 mm
3641645 A20QNNTOR2 2 20 26,0 180 13 1/8-27 NPT N.2L CM75 MS1200 — 2.5 mm
3641651 A25RNNTOR2 2 25 34,0 200 17 1/4-18 NPT N.2L CM75 MS1200 — 2.5 mm
3641622 A25RNNTOR3 3 25 34,0 200 17 1/8 - 27 NPT N.3L CM73LP — MS2111 25 IP
3641646 A32SNNTOR3 3 32 44,0 250 22 1/4-18 NPT N.3L CM73LP — MS2111 25 IP
3641653 A40TNNTOR3 3 40 54,0 300 27 1/4-18 NPT N.3L CM73LP — MS2111 25 IP
3641654 A40TNNTOR4 4 40 54,0 300 27 1/4-18 NPT N.4L CM73LP — MS2111 25 IP
3641661 A50UNNTOR4 4 50 70,0 350 35 1/4-18 NPT N.4L CM73LP — MS2111 25 IP
3641644 A12MNNTOR2 2 12 18,5 150 11 1/16-27 NPT NG2L CM147 MS1200 — 2.5 mm
left hand
3641649 A16MNNTOL2 2 16 22,0 150 11 1/8-27 NPT N.2R CM74 MS1200 — 2.5 mm
3641652 A20QNNTOL2 2 20 26,0 180 13 1/8-27 NPT N.2R CM74 MS1200 — 2.5 mm
3641657 A25RNNTOL2 2 25 34,0 200 17 1/4-18 NPT N.2R CM74 MS1200 — 2.5 mm
3641650 A25RNNTOL3 3 25 34,0 200 17 1/4-18 NPT N.3R CM72LP — MS2111 25 IP
3641656 A32SNNTOL3 3 32 44,0 250 22 1/4-18 NPT N.3R CM72LP — MS2111 25 IP
3641659 A40TNNTOL3 3 40 54,0 300 27 1/4-18 NPT N.3R CM72LP — MS2111 25 IP
3641663 A40TNNTOL4 4 40 54,0 300 27 1/4-18 NPT N.4R CM72LP — MS2111 25 IP
3641690 A50UNNTOL4 4 50 70,0 350 35 1/4-18 NPT N.4R CM72LP — MS2111 25 IP
3641655 A12MNNTOL2 2 12 18,5 150 11 1/16-27 NPT NG2R CM146 MS1200 — 2.5 mm
D min
Right Hand Tool
Steel shank with
through coolant.
See page F8
for inserts.
Threading
WID_Master16_Turning_Threading_F030_F031_Metric_REBRAND.indd 31 11/11/15 5:40 PM
F32
LViWID M 16 T i Th di F032 F033 M i REBRAND N b 13 2015 3 38 PM
widia.com
TopThread™
Boring Bars
A-NNT-1
NOTE: F dimension measured over sharp point of insert.
order number catalogue number
seat
size D D min D2 L1 L2 F A CS
gage
insert clamp
clamp
screw
hex/
Torx Plus
right hand
3641647 A12MNNTOR1 1 12 11,5 8,7 150 31 7 4,0 1/16-27 NPT N.1L CM109 MS1034 1.5 mm
3641648 A10KNNTOR1 1 10 11,5 10,0 125 — 7 3,2 — NG1L CM109 MS1034 1.5 mm
Threading
Right Hand Tool
Necked steel
shank with
through coolant.
See page F8
for inserts.
WID_Master16_Turning_Threading_F032_F033_Metric_REBRAND.indd 32 11/13/15 4:27 PM
F33
LViWID M 16 T i Th di F032 F033 M i REBRANDN b 13 20153 38PM
widia.com
(continued)
TopThread™
KM™ Units
NE 90° • Steel
D2 D min F L4 L1
order number catalogue number mm in mm in mm in mm in mm in
gage
insert kg lbs
right hand
3955481 KM40TSS12ENER2 12 .472 19 .73 11 .433 42 1.655 70 2.756 NG2L 0,27 .58
3955483 KM40TSS16FNER2 16 .630 20 .79 11 .433 56 2.209 80 3.150 NG2L 0,28 .62
3955485 KM40TSS20GNER2 20 .787 25 .98 13 .512 70 2.757 90 3.543 NG2L 0,35 .76
3955487 KM40TSS25ENER2 25 .984 32 1.26 17 .669 55 2.169 70 2.756 NG2L 0,34 .75
3955491 KM40TSS25ENER3 25 .984 34 1.34 17 .669 55 2.169 70 2.756 NG3L 0,35 .77
3955489 KM40TSS25HNER2 25 .984 32 1.26 17 .669 75 2.954 100 3.937 NG2L 0,49 1.08
3955493 KM40TSS25HNER3 25 .984 34 1.34 17 .669 75 2.954 100 3.937 NG3L 0,49 1.09
3955497 KM40TSS32GNER3 32 1.260 40 1.57 22 .866 76 2.993 90 3.543 NG3L 0,55 1.21
3955495 KM40TSS32JNER3 32 1.260 40 1.57 22 .866 96 3.780 110 4.331 NG3L 0,67 1.48
left hand
3955480 KM40TSS12ENEL2 12 .472 19 .73 11 .433 42 1.655 70 2.756 NG2R 0,27 .59
3955482 KM40TSS16FNEL2 16 .630 20 .79 11 .433 56 2.209 80 3.150 NG2R 0,28 .62
3955484 KM40TSS20GNEL2 20 .787 25 .98 13 .512 70 2.757 90 3.543 NG2R 0,35 .76
3955486 KM40TSS25ENEL2 25 .984 32 1.26 17 .669 55 2.169 70 2.756 NG2R 0,34 .75
3955490 KM40TSS25ENEL3 25 .984 34 1.34 17 .669 55 2.169 70 2.756 NG3R 0,35 .77
3955488 KM40TSS25HNEL2 25 .984 32 1.26 17 .669 75 2.954 100 3.937 NG2R 0,49 1.08
3955492 KM40TSS25HNEL3 25 .984 34 1.34 17 .669 75 2.954 100 3.937 NG3R 0,49 1.09
3955496 KM40TSS32GNEL3 32 1.260 40 1.57 22 .866 76 2.993 90 3.543 NG3R 0,55 1.21
3955494 KM40TSS32JNEL3 32 1.260 40 1.57 22 .866 96 3.780 110 4.331 NG3R 0,67 1.48
Threading
D2 D min F L4 L1
WID_Master16_Turning_Threading_F032_F033_Metric_REBRAND.indd 33 11/13/15 4:27 PM
F34
LViWID M 16 T i Th di F034 F035 M i REBRAND O b 15 2015 10 53 AM
widia.com
(NE 90° • Steel — continued)
Spare Parts
catalogue number clamp
clamp
screw
right hand
KM40TSS12ENER2 CM147 MS1488
KM40TSS16FNER2 CM147 MS1488
KM40TSS20GNER2 CM75 MS1488
KM40TSS25ENER2 CM75 MS1488
KM40TSS25ENER3 CM73 MS1489
KM40TSS25HNER2 CM75 MS1488
KM40TSS25HNER3 CM73 MS1489
KM40TSS32GNER3 CM73 MS1489
KM40TSS32JNER3 CM73 MS1489
left hand
KM40TSS12ENEL2 CM146 MS1488
KM40TSS16FNEL2 CM146 MS1488
KM40TSS20GNEL2 CM74 MS1488
KM40TSS25ENEL2 CM74 MS1488
KM40TSS25ENEL3 CM-72 MS1489
KM40TSS25HNEL2 CM74 MS1488
KM40TSS25HNEL3 CM-72 MS1489
KM40TSS32GNEL3 CM-72 MS1489
KM40TSS32JNEL3 CM-72 MS1489
TopThread™
KM™ Units
Threading
WID_Master16_Turning_Threading_F034_F035_Metric_REBRAND.indd 34 10/30/15 3:36 PM
F35
LViWID M 16 T i Th di F034 F035 M i REBRANDO b 15 201510 53AM
widia.com
TopThread™
KM™ Units
catalogue number clamp
clamp
screw
right hand
KM40TSE16JNER2 CM146 MS1488
left hand
KM40TSE16JNEL2 CM147 MS1488
Spare Parts
NE 90° • Carbide
D2 D min F L4 L1
order number catalogue number mm in mm in mm in mm in mm in
gage
insert kg lbs
right hand
3951836 KM40TSE16JNER2 16 .630 20 .79 11 .433 80 3.15 110 4.331 NG2L 0,41 .90
left hand
3951835 KM40TSE16JNEL2 16 .630 20 .79 11 .433 80 3.15 110 4.331 NG2R 0,41 .90
Threading
D2 D min F L4 L1
WID_Master16_Turning_Threading_F034_F035_Metric_REBRAND.indd 35 10/30/15 3:36 PM
F36
LViWID M 16 T i Th di F036 F037 M i REBRAND O b 15 2015 10 53 AM
widia.com
TopThread™
Threading Custom Solutions
The WIDIA
™
high-performance carbide grades, coupled
with our rigid TopThread clamping design, offer the
metalworking industry optimum threading productivity.
When the large inventory of WIDIA standard products
does not completely satisfy your productivity
requirements, consider having TopThread inserts
custom ground to meet your unique application needs.
The large variety of TopThread blank sizes allows
maximum exibility in threading endform design,
especially for extra wide or oil eld applications.
Common examples of special forms are shown here.
Please contact your local WIDIA representative for
recommendations on satisfying your special
threading needs.
• Quotes are handled quickly and ef ciently using
state-of-the-art CAD design software and electronic
database software.
• Our Carbide Custom Solutions Design Team is
your link to one of the industry’s largest electronic
databases. They can solve your most challenging
design problems.
• Where necessary or required, concept drawings are
available to facilitate your engineering development.
• A large number of high-performance carbide grades
are available to optimise your productivity. The option
of producing standard insert styles in non-standard
carbide grades allows you to optimise tool life
performance.
Features and Benefi ts:
NOTE: Right-hand inserts shown; left-hand inserts are also available.
style C6
RH shown
angle 1
style C5
(NTB-B)
RH shown
angle 1
angle 2
*to theoretical sharp point
*to theoretical sharp point
style C4
(NTB-A)
RH shown
angle 1
angle 2
*to theoretical sharp point
style C3
RH shown
angle 1
*to theoretical sharp point
style C2
RH shown
angle 1
angle 2
*to theoretical sharp point
WID_Master16_Turning_Threading_F036_F037_Metric_REBRAND.indd 36 10/30/15 3:36 PM
F37
LViWID M 16 T i Th di F036 F037 M i REBRANDO b 15 201510 53AM
widia.com
TopThread™ and TopGroove™
Hardware
insert size and style clamp clamp screw shim shim screw
NG-1L CM-109 S-304 – –
NG-2R CM-182 S-310 – –
NG-2L CM-183 S-310 – –
NG-2R CM-74 S-310 – –
NG-2L CM-75 S-310 – –
NG-3R CM-184 S-412 – –
NG-3L CM-185 S-412 – –
NG-3R CM-72 S-412 – –
NG-3L CM-73 S-412 – –
NG-3R* CM-78 S-412 – –
NG-3L* CM-70 S-412 – –
NG-4R CM-72 S-412 SM-420 SL-344
NG-4L CM-73 S-412 SM-420 SL-344
NG-5R CM-80 S-352 – –
NG-5L CM-81 S-352 – –
NG-6R CM-120 S-412 SM-416 S-111
NG-6L CM-121 S-412 SM-416 S-111
NG-8R CM-144 S-422 SM-419 S-112
NG-8L CM-145 S-422 SM-419 S-112
NG-8R** CM-144 S-422 SM-427 S-111
NG-8L** CM-145 S-422 SM-427 S-111
TopGroove relief grooving
NU-3125R CM-72 S-412 – –
NU-3125L CM-73 S-412 – –
NU-3125R** CM-72 S-618 – –
NU-3125L** CM-73 S-618 – –
TopThread and TopGroove
Toolholders and Boring Bars
clamp screw
clamp
insert
shim
shim screw
*25mm diameter boring head.
**Boring head.
WID_Master16_Turning_Threading_F036_F037_Metric_REBRAND.indd 37 10/30/15 3:36 PM
F38
LViWID M 16 T i Th di F038 F039 M i REBRAND N b 11 2015 5 04 PM
widia.com
Laydown insert technology, with its wide range of available tools and inserts, guarantees
increased tool life, minimised built-up edges, and precise cuts of most common materials.
• TN6025™ premium PVD TiAIN-coated grade outperforms conventional PVD grades.
• Enables superior chip control and reduced cutting forces.
• Partial and full profi le insert options available for all common thread forms.
This specially engineered system meets all modern production standards. With an extensive
range of inserts and toolholders available, the Laydown Threading platform is ideal for all
of your threading requirements.
With the WIDIA™ Laydown Threading System, you experience reliable countersunk
screw locking for unhindered chip fl ow and precise insert positioning accuracy.
• Industry-leading thread quality.
• Four insert sizes available to cover a wide range of thread-making operations.
• Ideal for high-helix/multi-start threads and single-point threading in small-diameter bores.
• Maximised tool life and low-profi le design for unhindered chip fl ow and superior performance.
Laydown Insert Technology
The Laydown Threading Solution
Laydown
WIDIA™ Laydown Threading
For increased reliability and productivity, look no further than the
WIDIA Laydown Threading System for all of your I.D. and O.D.
threading applications. The Laydown Threading System maximises
tool life and thread quality.
WID_Master16_Turning_Threading_F038_F039_Metric_REBRAND.indd 38 11/11/15 5:40 PM
F39
LViWID M 16 T i Th di F038 F039 M i REBRANDN b 11 20155 04PM
widia.com
Reliable TopClamp™ locking guarantees
precise insert positioning accuracy.
Choose from both steel
and carbide boring bars
to satisfy all machining
application needs.
Get more parts per insert
with the economy of the
Laydown Threading insert’s
three cutting edges.
WID_Master16_Turning_Threading_F038_F039_Metric_REBRAND.indd 39 11/11/15 5:40 PM
F40
LViWID M 16 T i Th di F040 F041 M i REBRAND N b 11 2015 5 07 PM
widia.com
Laydown Threading
Insert Selection Guide
Step 2 • Select Holder from Catalogue Page
Required Information:
• External/internal operation.
• Minimum bore diameter (for internal operations).
• Hand of tool.
• Insert size (gage insert).
The insert size must match the gage insert size of your toolholder selection:
Select the appropriate holder for the insert size and hand:
Step 1 • Select Threading Method and Hand of Tooling
Required Information:
• External/internal operation.
• Spindle rotation/hand of thread.
• Feed direction.
L R L R
hand of thread hand of toolholder hand of insert
Feed direction away from the chuck • reverse helix*
external right-hand thread external left-hand thread internal right-hand thread internal left-hand thread
Feed direction toward the chuck • standard helix • RECOMMENDED
external left-hand thread external right-hand thread internal left-hand thread internal right-hand thread
L
RLR
R
RL
L
L
L
L
L
R
R
RR
LR
L
LL
L
RR
R
R
*Negative shim required
catalogue
number
gage
insert
minimum
bore diameter shim
S0812LSER2 2IRA60 16,5mm —
S2020LSER3 3IR... 36,8mm SM-YI3
WID_Master16_Turning_Threading_F040_F041_Metric_REBRAND.indd 40 11/11/15 5:40 PM
F41
LViWID M 16 T i Th di F040 F041 M i REBRANDN b 11 20155 07PM
widia.com
Laydown Threading
Insert Selection Guide
insert size catalogue number TN6025
11 2IRA60 •
16 3IRAG60 •
Step 3 • Choose Insert for Application
Step 5 • Select Grade and Speed
Recommendations for Grade and Speed Selection — m/min
• Select cresting inserts for fully controlled thread form including diameter.
• Cresting inserts eliminate the need for deburring and are optimised
for the best tool life at that pitch.
• Non-cresting partial pro le inserts offer the exibility
to cut a variety of thread pitches with one insert.
• Note insert size for toolholder selection.
workpiece
material steel stainless steel cast iron non-ferrous metals high-temp alloys
insert style precision ground
rst choice TN6025 TN6025 TN6025 TN6025 TN6025
40–200 (130–650) 40–135 (130–450) 60–145 (200–475) 50–360 (160–1150) 10–100 (35–330)
See threading insert overview on page F42.
If recommended shim is different from shim supplied with toolholder, order shim separately.
NOTE: Optimise your threading operation by using the proper infeed angle and the recommended infeed values. See the Technical Section on pages F83–F105.
Also see detailed shim selection information on pages F104–F105.
Step 4 • Select Appropriate Shim
Required Information:
• Thread form (TPI or pitch).
• Pitch diameter.
• Helix method (hand of tool, feed direction, hand of thread).
• Number of starts.
Select the proper shim: SMYE... for external RH or internal LH
SMYI... for internal RH or external LH
Feed direction toward the chuck •
standard helix • RECOMMENDED
RH thread/RH tooling LH thread/LH tooling
feed direction away from the chuck •
reverse helix
LH thread/RH tooling RH thread/LH tooling
WID_Master16_Turning_Threading_F040_F041_Metric_REBRAND.indd 41 11/11/15 5:40 PM
F42
LViWID M 16 T i Th di F042 F043 M i REBRAND O b 15 2015 10 54 AM
widia.com
Laydown Threading
Insert Overview
style
thread
profi le standard
tolerance
class cresting application page(s)fl at top
60 Partial
pro le
60º ——N
General use for 60° thread forms, such as ISO
and UN, where non-cresting inserts are desired
to cut a variety of pitches.
F46—F47
ISO Metric ISO ISO R262,
DIN 13 6g/6H Y Widely used metric 60° V-form for all industries. F48—F53
UN American
UN ANSI B1.1:74 2A/2B Y Widely used inch-based 60° V-form for all
industries. F54—F57
NPT NPT ANSI/ASME
B1.20.1S1983 Standard
NPT NNational Pipe Thread standard 60° thread form
for pipe ttings. F58—F59
55 Partial
pro le
55º ——N
General use for 55° thread forms such as
Whitworth, BSW, and BSP where non-cresting
inserts are desired to cut a variety of pitches.
F60—F61
WWhitworth,
BSW, BSF,
BSP
BS 84:1956,
ISO
228/1:1982,
DIN 259
Medium
Class A YWidely used 55° form for gas and water
connections. F62—F63
API-
RD API round API STD.
5B:1979 Standard
API RD Y
60° V-form with large radius for casing, tubing,
and line pipe in the oil and gas industry,
including 8 and 10 round forms.
F64
PG PG DIN 404B0 Y 80° steel conduit thread. F65
RD Round DIN 405 7e/7H Y Round thread form for tube ttings in the
chemical and food industries. F65—F66
TR Trapez DIN 103 7e/7H N 30° truncated metric thread form for motion
applications. F67—F68
WID_Master16_Turning_Threading_F042_F043_Metric_REBRAND.indd 42 10/30/15 3:37 PM
F43
LViWID M 16 T i Th di F042 F043 M i REBRANDO b 15 201510 54AM
widia.com
Coatings provide high-speed
capability and are engineered
for fi nishing to heavy roughing.
Laydown Threading Thread Form Guide
Grade
• Reduce cycle times — high speed capability.
• Longer tool life — new multilayer
coating provides better wear resistance.
TN6025
PVD-TiAlN Nano-multilayer coated carbide. General-purpose machining for steels,
stainless steels, cast irons, non-ferrous materials, and dif cult-to-machine materials.
Recommended at low to medium cutting speeds when higher toughness is required.
P
M
K
N
S
HC-P25
PSteel
MStainless Steel
KCast Iron
NNon-Ferrous
SHigh-Temp Alloys
HHardened Materials
wear
resistance toughness
Coating Grade Description 05 10 15 20 25 30 35 40 45
Laydown Threading
Grades and Grade Descriptions
• All Laydown Threading inserts are precision ground to provide
accurate thread forms and indexing.
• Both cresting and non-cresting partial pro le inserts are speci cally
designed for either external or internal threading operations.
• Cresting inserts provide a fully controlled thread form, including
diameter for a given pitch. The need for deburring is eliminated
and the inserts are optimised for the best tool life at that pitch.
• Non-cresting partial pro le inserts offer the exibility to cut a variety
of thread pitches with one insert.
• Right-hand Laydown Threading toolholders use right-hand inserts.
Left-hand Laydown Threading toolholders use left-hand inserts.
• Right-hand Laydown Threading boring bars use right-hand inserts.
Left-hand Laydown Threading boring bars use left-hand inserts.
WID_Master16_Turning_Threading_F042_F043_Metric_REBRAND.indd 43 10/30/15 3:37 PM
F44
LViWID M 16 T i Th di F044 F045 M i REBRAND O b 15 2015 10 56 AM
widia.com
3 E R A ISO
Insert
Size
Insert Type Hand
of Insert
Thread
Pitch
Thread
Profi le
Number of Teeth
E —
External thread
R —
Right-hand
thread
Single tooth pro le —
No symbol
I —
Internal thread
L —
Left-hand
thread
Multi-tooth pro le —
Number of teeth
(cutting edge and symbol)
Multi-tooth pro le with
two teeth — 2M
Partial pro le inserts
Full pro le inserts
symbol d L1
2 0.250 11
3 0.375 16
4 0.500 22
5 0.625 27
Laydown Threading
Insert Identifi cation System
symbol mm
A 0,5–1,5
AG 0,5–3,0
G 1,7–3,0
N 3,5–5,0
Q 5,5–6,0
symbol mm
Actual
TPI 0,5–0,4
d
L1
3ERAISO
Laydown Threading
Catalogue Numbering System
55 Partial Pro le 55°
60 Partial Pro le 60°
ISO ISO Metric 60°
TR ISO Metric 60°
UN ISO Inch/American UN 60°
WWhitworth 55°
NPT American National Pipe Thread 60°
RD Round
PG Steel Conduit
APIRD API Round
WID_Master16_Turning_Threading_F044_F045_Metric_REBRAND.indd 44 10/30/15 3:37 PM
F45
LViWID M 16 T i Th di F044 F045 M i REBRANDO b 15 201510 56AM
widia.com
Cutting Speed — vc
m/min
TN6025
Material
Group min Start max
P
0/1 130 140 150
2110 145 175
3110 145 175
475 95 115
5100 125 145
640 55 65
M
160 75 90
240 50 55
340 50 60
K
160 80 90
260 75 85
360 75 90
N
1600 750 900
2535 685 835
3230 300 370
4135 180 225
570 90 110
6445 565 690
7550 700 850
S
125 35 40
215 20 20
340 60 70
420 30 35
Laydown Threading
Recommended Cutting Speeds • Metric
WID_Master16_Turning_Threading_F044_F045_Metric_REBRAND.indd 45 10/30/15 3:37 PM
F46
LViWID M 16 T i Th di F046 F047 M i REBRAND O b 15 2015 10 56 AM
widia.com
Laydown Threading
Threading Inserts
ER/L-60
catalogue number RC EX E
insert
size
thread
pitch mm TPI TPF
TN6025
right hand
2ERA60 0,05 0,9 0,8 2 0,50-1,5 48-16 —
2007404
3ERA60 0,05 0,8 0,9 3 0,50-1,5 48-16 —
2018214
3ERAG60 0,08 1,2 1,7 3 0,50-3,0 48-8 —
2018246
3ERG60 0,28 1,2 1,7 3 1,75-3,0 14-8 —
2018222
4ERN60 0,53 1,7 2,5 4 3,5-5,0 7-5 —
2018252
5ERQ60 0,64 2,1 3,1 5 5,5-6,0 4.5-4 —
2018256
left hand
3ELAG60 0,08 1,2 1,7 3 0,50-3,0 48-8 —
2071904
3ELG60 0,28 1,2 1,7 3 1,75-3,0 14-8 —
2018236
Partial Prole
60° External
rst choice
alternate choice
Threading
P
M
K
N
S
H
WID_Master16_Turning_Threading_F046_F047_Metric_REBRAND.indd 46 10/30/15 3:37 PM
F47
LViWID M 16 T i Th di F046 F047 M i REBRANDO b 15 201510 56AM
widia.com
Laydown Threading
Threading Inserts
IR/L-60
catalogue number RC EX E
insert
size
thread
pitch mm TPI TPF
TN6025
right hand
2IRA60 0,05 0,8 0,9 2 0,50-1,5 48-16 —
2018262
3IRA60 0,05 0,8 0,9 3 0,50-1,5 48-16 —
2018272
3IRAG60 0,05 1,2 1,7 3 0,50-3,0 48-8 —
2018284
3IRG60 0,15 1,2 1,7 3 1,75-3,0 14-8 —
2018278
4IRN60 0,31 1,7 2,5 4 3,5-5,0 7-5 —
2018290
5IRQ60 0,30 1,8 2,7 5 5,5-6,0 4.5-4 —
2018295
left hand
2ILA60 0,05 0,8 0,9 2 0,50-1,5 48-16 —
2021656
3ILAG60 0,05 1,2 1,7 3 0,50-3,0 48-8 —
2008275
3ILG60 0,15 1,2 1,7 3 1,75-3,0 14-8 —
2007419
4ILN60 0,31 1,7 2,5 4 3,5-5,0 7-5 —
2100489
Threading
Partial Prole
60° Internal
rst choice
alternate choice
P
M
K
N
S
H
WID_Master16_Turning_Threading_F046_F047_Metric_REBRAND.indd 47 10/30/15 3:37 PM
F48
LViWID M 16 T i Th di F048 F049 M i REBRAND O b 15 2015 10 56 AM
widia.com
Laydown Threading
Threading Inserts
ER/L-ISO
catalogue number EX E
insert
size
thread
pitch mm TPI TPF
TN6025
right hand
2ER15ISO 1,0 0,8 2 1,50 — —
2007542
3ER05ISO 0,6 0,4 3 0,50 — —
2018377
3ER07ISO 0,6 0,6 3 0,70 — —
2018389
3ER075ISO 0,6 0,6 3 0,75 — —
2018395
3ER08ISO 0,6 0,6 3 0,80 — —
2018403
3ER10ISO 0,7 0,7 3 1,00 — —
2018411
3ER125ISO 0,8 0,9 3 1,25 — —
2018421
3ER15ISO 0,8 1,0 3 1,50 — —
2018429
3ER175ISO 0,9 1,2 3 1,75 — —
2018445
3ER20ISO 1,0 1,3 3 2,00 — —
2018460
3ER25ISO 1,1 1,5 3 2,50 — —
2018472
3ER30ISO 1,2 1,6 3 3,00 — —
2008256
4ER40ISO 1,6 2,3 4 4,00 — —
2018501
4ER35ISO 1,6 2,3 4 4,50 — —
2018495
4ER45ISO 1,7 2,4 4 4,50 — —
2018508
rst choice
alternate choice
ISO Metric-
External
Threading
(continued)
P
M
K
N
S
H
WID_Master16_Turning_Threading_F048_F049_Metric_REBRAND.indd 48 10/30/15 3:37 PM
F49
LViWID M 16 T i Th di F048 F049 M i REBRANDO b 15 201510 56AM
widia.com
Laydown Threading
Threading Inserts
catalogue number EX E
insert
size
thread
pitch mm TPI TPF
TN6025
4ER50ISO 1,7 2,5 4 5,00 — —
2018517
5ER55ISO 2,7 1,9 5 5,50 — —
2018522
5ER60ISO 2,9 2,0 5 6,00 — —
2018528
left hand
2EL05ISO 0,6 0,4 2 0,50 — —
3118234
2EL06ISO 0,6 0,6 2 0,60 — —
3118236
2EL07ISO 0,6 0,6 2 0,70 — —
3118240
2EL075ISO 0,6 0,6 2 0,75 — —
3118238
2EL08ISO 0,6 0,6 2 0,80 — —
3118242
2EL10ISO 0,7 0,7 2 1,00 — —
3118374
2EL125ISO 0,8 0,9 2 1,25 — —
3118376
2EL15ISO 0,8 1,0 2 1,50 — —
3118378
2EL175ISO 0,8 1,1 2 1,75 — —
3118380
3EL035ISO 0,8 0,4 3 0,35 — —
3122015
3EL04ISO 0,7 0,4 3 0,40 — —
3122018
3EL045ISO 0,7 0,4 3 0,45 — —
3122017
Threading
(ER/L-ISO — continued)
rst choice
alternate choice
ISO Metric-
External
P
M
K
N
S
H
WID_Master16_Turning_Threading_F048_F049_Metric_REBRAND.indd 49 10/30/15 3:37 PM
F50
LViWID M 16 T i Th di F050 F051 M i REBRANDD b 15 201510 12AM
widia.com
Laydown Threading
Threading Inserts
rst choice
alternate choice
ISO Metric-
External
catalogue number EX E
insert
size
thread
pitch mm TPI TPF
TN6025
3EL06ISO 0,6 0,6 3 0,60 — —
3122021
3EL10ISO 0,7 0,7 3 1,00 — —
2008187
3EL15ISO 0,8 1,0 3 1,50 — —
2018435
3EL175ISO 0,9 1,2 3 1,75 — —
2018447
3EL20ISO 1,3 1,0 3 2,00 — —
2018466
3EL30ISO 1,2 1,6 3 3,00 — —
2018489
4EL40ISO 1,6 2,3 4 4,00 — —
2101539
4EL50ISO 1,7 2,5 4 5,00 — —
2101597
Threading
(ER/L-ISO — continued) P
M
K
N
S
H
WID_Master16_Turning_Threading_F050_F051_Metric_REBRAND.indd 50 12/15/15 10:12 AM
F51
LViWID M 16 T i Th di F050 F051 M i REBRANDD b 15 201510 12AM
widia.com
Laydown Threading
Threading Inserts
IR/L-ISO
catalogue number EX E
insert
size
thread
pitch mm TPI TPF
TN6025
right hand
2IR075ISO 0,6 0,3 2 0,75 — —
2007585
2IR10ISO 0,6 0,7 2 1,00 — —
2007613
2IR125ISO 0,6 0,7 2 1,25 — —
2007622
2IR15ISO 0,8 1,0 2 1,50 — —
2018550
2IR175ISO 0,9 1,1 2 1,75 — —
2018564
3IR05ISO 0,6 0,6 3 0,50 — —
2018582
3IR075ISO 0,6 0,6 3 0,75 — —
2018596
3IR10ISO 0,6 0,7 3 1,00 — —
2018612
3IR125ISO 0,8 0,9 3 1,25 — —
2018626
3IR15ISO 0,8 1,0 3 1,50 — —
2018636
3IR175ISO 0,9 1,2 3 1,75 — —
2018652
3IR20ISO 1,0 1,3 3 2,00 — —
2018663
3IR25ISO 1,1 1,5 3 2,50 — —
2018674
3IR30ISO 1,1 1,5 3 3,00 — —
2018684
4IR35ISO 1,6 2,3 4 3,50 — —
2018695
rst choice
alternate choice
ISO Metric-Internal
(continued)
Threading
P
M
K
N
S
H
WID_Master16_Turning_Threading_F050_F051_Metric_REBRAND.indd 51 12/15/15 10:12 AM
F52
LViWID M 16 T i Th di F052 F053 M i REBRAND O b 15 2015 10 57 AM
widia.com
Laydown Threading
Threading Inserts
catalogue number EX E
insert
size
thread
pitch mm TPI TPF
TN6025
4IR40ISO 1,6 2,3 4 4,00 — —
2018702
4IR45ISO 1,6 2,4 4 4,50 — —
2018708
4IR50ISO 1,6 2,3 4 5,00 — —
2018714
5IR55ISO 1,6 2,3 5 5,50 — —
2021597
5IR60ISO 1,8 2,5 5 6,00 — —
2018720
left hand
2IL035ISO 0,8 0,4 2 0,35 — —
3118382
2IL04ISO 0,7 0,4 2 0,40 — —
3118384
2IL05ISO 0,6 0,4 2 0,50 — —
3118386
2IL06ISO 0,6 0,6 2 0,60 — —
3118387
2IL07ISO 0,6 0,6 2 0,70 — —
3118390
2IL075ISO 0,6 0,6 2 0,75 — —
3118389
2IL08ISO 0,6 0,6 2 0,80 — —
3118392
2IL125ISO 0,8 0,9 2 1,25 — —
3123198
2IL15ISO 0,8 1,0 2 1,50 — —
2018557
2IL20ISO 0,9 1,1 2 2,00 — —
2071923
ISO Metric-Internal
(continued)
(IR/L-ISO — continued)
Threading
P
M
K
N
S
H
rst choice
alternate choice
WID_Master16_Turning_Threading_F052_F053_Metric_REBRAND.indd 52 10/30/15 3:37 PM
F53
LViWID M 16 T i Th di F052 F053 M i REBRANDO b 15 201510 57AM
widia.com
Laydown Threading
Threading Inserts
ISO Metric-Internal
(IR/L-ISO — continued)
Threading
catalogue number EX E
insert
size
thread
pitch mm TPI TPF
TN6025
3IL035ISO 0,8 0,3 3 0,35 — —
3124269
3IL04ISO 0,8 0,4 3 0,40 — —
3124271
3IL05ISO 0,6 0,4 3 0,50 — —
3124272
3IL06ISO 0,6 0,6 3 0,60 — —
3124274
3IL07ISO 0,6 0,6 3 0,70 — —
3124276
3IL075ISO 0,6 0,6 3 0,75 — —
2018598
3IL15ISO 0,8 1,0 3 1,50 — —
2018642
3IL20ISO 1,0 1,3 3 2,00 — —
2018667
3IL25ISO 1,1 1,5 3 2,50 — —
2018678
3IL30ISO 1,1 1,5 3 3,00 — —
2018688
4IL40ISO 1,6 2,3 4 4,00 — —
2102322
4IL45ISO 1,6 2,4 4 4,50 — —
2102347
4IL50ISO 1,6 2,3 4 5,00 — —
2076776
5IL55ISO 1,6 2,3 5 5,50 — —
2642318
5IL60ISO 1,8 2,5 5 6,00 — —
2642319
P
M
K
N
S
H
rst choice
alternate choice
WID_Master16_Turning_Threading_F052_F053_Metric_REBRAND.indd 53 10/30/15 3:37 PM
F54
LViWID M 16 T i Th di F054 F055 M i REBRAND O b 15 2015 10 57 AM
widia.com
Laydown Threading
Threading Inserts
ER/L-UN
catalogue number EX E
insert
size
thread
pitch mm TPI TPF
TN6025
right hand
3ER48UN 0,6 0,6 3 — 48 —
2018736
3ER40UN 0,6 0,6 3 — 40 —
2018744
3ER36UN 0,6 0,6 3 — 36 —
2018748
3ER32UN 0,6 0,6 3 — 32 —
2018752
3ER28UN 0,6 0,7 3 — 28 —
2018756
3ER27UN 0,8 0,7 3 — 27 —
2018760
3ER24UN 0,7 0,8 3 — 24 —
2018766
3ER20UN 0,8 0,9 3 — 20 —
2018772
3ER18UN 0,8 1,0 3 — 18 —
2018778
3ER16UN 0,9 1,1 3 — 16 —
2018782
3ER14UN 1,0 1,2 3 — 14 —
2018790
American
UN-External
rst choice
alternate choice
Threading
P
M
K
N
S
H
(continued)
WID_Master16_Turning_Threading_F054_F055_Metric_REBRAND.indd 54 10/30/15 3:37 PM
F55
LViWID M 16 T i Th di F054 F055 M i REBRANDO b 15 201510 57AM
widia.com
catalogue number EX E
insert
size
thread
pitch mm TPI TPF
TN6025
3ER13UN 1,3 1,0 3 — 13 —
2018796
3ER12UN 1,1 1,4 3 — 12 —
2018802
3ER11UN 1,1 1,5 3 — 11 —
2018808
3ER10UN 1,1 1,5 3 — 10 —
2018814
3ER8UN 1,2 1,6 3 — 8 —
2018824
left hand
3EL13UN 1,0 1,3 3 — 13 —
3122039
3EL12UN 1,1 1,4 3 — 12 —
2192607
3EL11UN 1,1 1,5 3 — 11 —
3122032
3EL10UN 1,1 1,5 3 — 10 —
3122028
American
UN-External
rst choice
alternate choice
Threading
P
M
K
N
S
H
(ER/L-UN — continued)
Laydown Threading
Threading Inserts
WID_Master16_Turning_Threading_F054_F055_Metric_REBRAND.indd 55 10/30/15 3:37 PM
F56
LViWID M 16 T i Th di F056 F057 M i REBRAND O b 15 2015 10 57 AM
widia.com
Laydown Threading
Threading Inserts
IR/L-UN
catalogue number EX E
insert
size
thread
pitch mm TPI TPF
TN6025
right hand
2IR32UN 0,6 0,6 2 — 32 —
2018860
3IR32UN 0,6 0,6 3 — 32 —
2018918
3IR28UN 0,6 0,7 3 — 28 —
2018922
3IR24UN 0,7 0,8 3 — 24 —
2018932
3IR20UN 0,8 0,9 3 — 20 —
2018938
2IR20UN 0,8 0,9 2 — 20 —
2018876
3IR18UN 0,8 1,0 3 — 18 —
2018944
2IR18UN 0,8 1,0 2 — 18 —
2018882
3IR16UN 0,9 1,1 3 — 16 —
2018950
2IR16UN 0,9 1,1 2 — 16 —
2018886
3IR14UN 0,9 1,2 3 — 14 —
2018955
American
UN-Internal
rst choice
alternate choice
Threading
(continued)
P
M
K
N
S
H
WID_Master16_Turning_Threading_F056_F057_Metric_REBRAND.indd 56 10/30/15 3:37 PM
F57
LViWID M 16 T i Th di F056 F057 M i REBRANDO b 15 201510 57AM
widia.com
Laydown Threading
Threading Inserts
catalogue number EX E
insert
size
thread
pitch mm TPI TPF
TN6025
3IR12UN 1,1 1,4 3 — 12 —
2018966
3IR10UN 1,1 1,5 3 — 10 —
2018979
3IR8UN 1,1 1,5 3 — 8 —
2018990
left hand
3IL64UN 0,8 0,4 3 — 64 —
3122416
3IL56UN 0,7 0,4 3 — 56 —
3122414
2IL32UN 0,6 0,6 2 — 32 —
2102653
3IL12UN 1,1 1,4 3 — 12 —
2102749
3IL9UN 1,2 1,7 3 — 9 —
3122446
3IL8UN 1,1 1,5 3 — 8 —
3122444
American
UN-Internal
rst choice
alternate choice
Threading
(IR/L-UN — continued) P
M
K
N
S
H
WID_Master16_Turning_Threading_F056_F057_Metric_REBRAND.indd 57 10/30/15 3:37 PM
F58
LViWID M 16 T i Th di F058 F059 M i REBRAND O b 15 2015 10 57 AM
widia.com
Laydown Threading
Threading Inserts
ER/L-NPT
catalogue number EX E
insert
size
thread
pitch mm TPI TPF
TN6025
right hand
3ER115NPT 1,1 1,5 3 — 11.5 .7500
2019298
3ER14NPT 0,9 1,2 3 — 14 .7500
2019288
3ER18NPT 0,8 1,0 3 — 18 .7500
2019278
3ER8NPT 1,3 1,8 3 — 8 .7500
2019305
Threading
NPT-External
rst choice
alternate choice
P
M
K
N
S
H
WID_Master16_Turning_Threading_F058_F059_Metric_REBRAND.indd 58 10/30/15 3:37 PM
F59
LViWID M 16 T i Th di F058 F059 M i REBRANDO b 15 201510 57AM
widia.com
Laydown Threading
Threading Inserts
IR/L-NPT
catalogue number EX E insert size
thread
pitch mm TPI TPF
TN6025
right hand
3IR115NPT 1,1 1,5 3 — 11.5 .7500
2019335
3IR14NPT 0,9 1,2 3 — 14 .7500
2019329
3IR18NPT 0,8 1,0 3 — 18 .7500
2019323
3IR8NPT 1,3 1,8 3 — 8 .7500
2019339
NPT-Internal
rst choice
alternate choice
Threading
P
M
K
N
S
H
WID_Master16_Turning_Threading_F058_F059_Metric_REBRAND.indd 59 10/30/15 3:37 PM
F60
LViWID M 16 T i Th di F060 F061 M i REBRAND O b 15 2015 10 58 AM
widia.com
Laydown Threading
Threading Inserts
ER/L-55
catalogue number RC EX E
insert
size
thread
pitch mm TPI TPF
TN6025
right hand
3ERA55 0,05 0,8 0,9 3 0,50-1,5 48-16 —
2018301
3ERAG55 0,08 1,2 1,7 3 0,50-3,0 48-8 —
2018314
3ERG55 0,20 1,2 1,7 3 1,75-3,0 14-8 —
2018308
4ERN55 0,43 1,7 2,5 4 3,5-5,0 7-5 —
2018320
left hand
3ELG55 0,20 1,2 1,7 3 1,75-3,0 14-8 —
2008190
Threading
Partial Prole
55° External
rst choice
alternate choice
P
M
K
N
S
H
WID_Master16_Turning_Threading_F060_F061_Metric_REBRAND.indd 60 10/30/15 3:37 PM
F61
LViWID M 16 T i Th di F060 F061 M i REBRANDO b 15 201510 58AM
widia.com
Laydown Threading
Threading Inserts
IR/L-55
catalogue number RC EX E
insert
size
thread
pitch mm TPI TPF
TN6025
right hand
2IRA55 0,05 0,8 0,9 2 0,50-1,5 48-16 —
2018328
3IRA55 0,05 0,8 0,9 3 0,50-1,5 48-16 —
2018334
3IRAG55 0,07 1,2 1,7 3 0,50-3,0 48-8 —
2018346
3IRG55 0,21 1,2 1,7 3 1,75-3,0 14-8 —
2018340
4IRN55 0,43 1,7 2,5 4 3,5-5,0 7-5 —
2018354
left hand
3ILA55 0,05 0,8 0,9 3 0,50-1,5 48-16 —
3122449
3ILAG55 0,07 1,2 1,7 3 0,50-3,0 48-8 —
2018348
Partial Prole
55° Internal
rst choice
alternate choice
Threading
P
M
K
N
S
H
WID_Master16_Turning_Threading_F060_F061_Metric_REBRAND.indd 61 10/30/15 3:37 PM
F62
LViWID M 16 T i Th di F062 F063 M i REBRAND O b 15 2015 10 58 AM
widia.com
Laydown Threading
Threading Inserts
ER/L-W
catalogue number EX E
insert
size
thread
pitch mm TPI TPF
TN6025
right hand
3ER32W 0,6 0,6 3 — 32 —
2019023
3ER28W 0,6 0,7 3 — 28 —
2019029
3ER19W 0,8 1,0 3 — 19 —
2019055
3ER18W 0,8 1,0 3 — 18 —
2021677
3ER16W 0,9 1,1 3 — 16 —
2019061
3ER14W 1,0 1,2 3 — 14 —
2019071
3ER12W 1,1 1,4 3 — 12 —
2019077
3ER11W 1,1 1,5 3 — 11 —
2019083
3ER10W 1,1 1,5 3 — 10 —
2019089
3ER8W 1,2 1,5 3 — 8 —
2019101
4ER6W 1,6 2,3 4 — 6 —
2021725
left hand
3EL11W 1,1 1,5 3 — 11 —
2065289
3EL8W 1,2 1,5 3 — 8 —
2103046
Whitworth BSW,
BSF, BSP-External
rst choice
alternate choice
Threading
P
M
K
N
S
H
WID_Master16_Turning_Threading_F062_F063_Metric_REBRAND.indd 62 10/30/15 3:37 PM
F63
LViWID M 16 T i Th di F062 F063 M i REBRANDO b 15 201510 58AM
widia.com
Laydown Threading
Threading Inserts
IR/L-W
catalogue number EX E
insert
size
thread
pitch mm TPI TPF
TN6025
right hand
2IR19W 0,8 1,0 2 — 19 —
2019121
2IR14W 0,9 1,1 2 — 14 —
2019136
3IR19W 0,8 0,9 3 — 19 —
2019172
3IR16W 0,9 1,1 3 — 16 —
2019178
3IR14W 1,0 1,2 3 — 14 —
2019189
3IR12W 1,1 1,4 3 — 12 —
2019195
3IR11W 1,1 1,5 3 — 11 —
2019205
3IR8W 1,2 1,5 3 — 8 —
2019224
4IR6W 1,6 2,3 4 — 6 —
2019234
Threading
Whitworth
BSW, BSF,
BSP-Internal
rst choice
alternate choice
P
M
K
N
S
H
WID_Master16_Turning_Threading_F062_F063_Metric_REBRAND.indd 63 10/30/15 3:37 PM
F64
LViWID M 16 T i Th di F064 F065 M i REBRAND O b 15 2015 10 58 AM
widia.com
Laydown Threading
Threading Inserts
ER-APIRD
catalogue number RC EX E
insert
size
thread
pitch mm TPI TPF
TN6025
right hand
3ER10APIRD 0,34 1,2 1,4 3 — 10 .750
2019608
Threading
rst choice
alternate choice
IR-APIRD
catalogue number RC EX E
insert
size
thread
pitch mm TPI TPF
TN6025
right hand
3IR10APIRD 0,34 1,2 1,4 3 — 10 .750
2019618
3IR8APIRD 0,40 1,3 1,5 3 — 8 .750
2019622
API Round-Internal
P
M
K
N
S
H
API Round-External
WID_Master16_Turning_Threading_F064_F065_Metric_REBRAND.indd 64 10/30/15 3:38 PM
F65
LViWID M 16 T i Th di F064 F065 M i REBRANDO b 15 201510 58AM
widia.com
Laydown Threading
Threading Inserts
IR-PG
catalogue number RC EX E
insert
size
thread
pitch mm TPI TPF
TN6025
right hand
3IR16PG 0,11 1,1 0,8 3 — 16 —
2019441
Threading
rst choice
alternate choice
ER/L-RD
catalogue number RC EX E
insert
size
thread
pitch mm TPI TPF
TN6025
right hand
3ER8RD 0,76 1,4 1,3 3 — 8 —
2019347
4ER6RD 1,01 1,5 1,7 4 — 6 —
2019359
left hand
3EL8RD 0,76 1,4 1,3 3 — 8 —
2071943
Round External
P
M
K
N
S
H
WID_Master16_Turning_Threading_F064_F065_Metric_REBRAND.indd 65 10/30/15 3:38 PM
F66
LViWID M 16 T i Th di F066 F067 M i REBRAND O b 15 2015 10 58 AM
widia.com
Laydown Threading
Threading Inserts
IR/L-RD
catalogue number RC EX E
insert
size
thread
pitch mm TPI TPF
TN6025
right hand
3IR10RD 0,70 1,1 1,2 3 — 10 —
2019375
3IR8RD 0,70 1,4 1,4 3 — 8 —
2019381
4IR6RD 0,93 1,5 1,7 4 — 6 —
2019394
4IR4RD 1,40 2,3 2,2 4 — 4 —
2019400
left hand
3IL8RD 0,06 1,4 1,4 3 — 8 —
3122422
Round-Internal
R = 0,221P
rst choice
alternate choice
Threading
P
M
K
N
S
H
WID_Master16_Turning_Threading_F066_F067_Metric_REBRAND.indd 66 10/30/15 3:38 PM
F67
LViWID M 16 T i Th di F066 F067 M i REBRANDO b 15 201510 58AM
widia.com
Laydown Threading
Threading Inserts
ER/L-TR
catalogue number EX E
insert
size
thread
pitch mm TPI TPF
TN6025
right hand
3ER2TR 1,1 1,3 3 2,00 — —
2019453
3ER3TR 1,3 1,5 3 3,00 — —
2019461
4ER4TR 1,7 1,9 4 4,00 — —
2019469
4ER5TR 2,1 2,5 4 5,00 — —
2019479
5ER6TR 2,3 2,7 5 6,00 — —
2019487
left hand
3EL3TR 1,3 1,5 3 3,00 — —
2019463
4EL4TR 1,7 1,9 4 4,00 — —
2019471
Threading
Trapez-External
rst choice
alternate choice
P
M
K
N
S
H
WID_Master16_Turning_Threading_F066_F067_Metric_REBRAND.indd 67 10/30/15 3:38 PM
widia.com
F68
LViWID M 16 T i Th di F068 F069 M i REBRAND O b 15 2015 10 59 AM
Laydown Threading
Threading Inserts
IR/L-TR
catalogue number EX E
insert
size
thread
pitch mm TPI TPF
TN6025
right hand
3IR3TR 1,3 1,5 3 3,00 — —
2019511
4IR4TR 1,7 1,9 4 4,00 — —
2019520
4IR5TR 2,1 2,5 4 5,00 — —
2019528
5IR6TR 2,3 2,7 5 6,00 — —
2019534
Trapez-Internal
rst choice
alternate choice
Threading
P
M
K
N
S
H
WID_Master16_Turning_Threading_F068_F069_Metric_REBRAND.indd 68 10/30/15 3:38 PM
widia.com F69
LViWID M 16 T i Th di F068 F069 M i REBRANDO b 15 201510 59AM
AL253R
Catalogue Numbering System
AL253 R
Toolholder
Construction
Tool Type Shank Size Insert
Size
Hand of
Tool
A —
Shim required
Toolholders
• First two numbers
are shank height
in mm.
RH —
Thread symbol R
N —
Without shim
LH —
Thread symbol L
L — External Thread
Laydown Threading
Toolholder Identifi cation System
symbol d L1
2 6,35 11
3 9,52 16
4 12,7 22
5 15,88 27
d
L1
Laydown Threading
WID_Master16_Turning_Threading_F068_F069_Metric_REBRAND.indd 69 10/30/15 3:38 PM
F70
LViWID M 16 T i Th di F070 F071 M i REBRAND O b 15 2015 10 59 AM
widia.com
Threading
Laydown Threading
Toolholders
N/A
order number catalogue number
insert
size H B F L1 L2 shim
shim
screw Torx
insert
screw Torx
right hand
2022340 NL82R 2 8 8 11 136 18 ———SSN2T T8
2009587 AL163R 3 16161610025 SMYE3 SSY3T T10 SSA3T T10
2009591 AL203R 3 20202012830 SMYE3 SSY3T T10 SSA3T T10
2009594 AL253R 3 25252515330 SMYE3 SSY3T T10 SSA3T T10
2009597 AL254R 4 25252515536 SMYE4 SSY4T T20 SSA4T T20
2009600 AL323R 3 32323217330 SMYE3 SSY3T T10 SSA3T T10
2009603 AL324R 4 32323217536 SMYE4 SSY4T T20 SSA4T T20
2022589 AL325R 5 32323217640 SMYE5 SSY5T T25 SSA5T T25
2016118 AL404R 4 40404020536 SMYE4 SSY4T T20 SSA4T T20
2016122 AL405R 5 40404020640 SMYE5 SSY5T T25 SSA5T T25
left hand
2071294 AL163L 3 16161610025 SMYI3 SSY3T T10 SSA3T T10
2071295 AL203L 3 20202012530 SMYI3 SSY3T T10 SSA3T T10
2114772 AL254L 4 25252515036 SMYI4 SSY4T T20 SSA4T T20
Right Hand Tool
See page F42
for inserts.
WID_Master16_Turning_Threading_F070_F071_Metric_REBRAND.indd 70 10/30/15 3:38 PM
F71
LViWID M 16 T i Th di F070 F071 M i REBRANDO b 15 201510 59AM
widia.com
Laydown Threading
KM™ Units
LSE-N 90° • Internal Only
NOTE: Cutting units are supplied with insert screw and clamp assembly. However, tools are designed to use either the insert screw or the clamp assembly, not both.
L1 F D min
order number catalogue number mm in mm in mm in
gage
insert
insert
screw shim
shim
screw
clamp
assembly kg lbs
right hand
3950832 KM40TSLSER16N 40 1.575 27 1.063 54 2.126 LT16NR SSA3T SMYI3 SSY3T CKC3 0,35 .77
3950854 KM40TSLSER22N 40 1.575 27 1.063 54 2.126 LT22NR SSA4T SMYI4 SSY4T CKC4 0,35 .77
3959399 KM40TSLSER27N 45 1.772 27 1.063 54 2.126 LT27NR SSA5T SMYI5 SSY5T CKC5 0,39 .86
left hand
3950831 KM40TSLSEL16N 40 1.575 27 1.063 54 2.126 LT16NL SSA3T SMYE3 SSY3T CKC3 0,35 .77
3950853 KM40TSLSEL22N 40 1.575 27 1.063 54 2.126 LT22NL SSA4T SMYE4 SSY4T CKC4 0,35 .77
3959398 KM40TSLSEL27N 45 1.772 27 1.063 54 2.126 LT27NL SSA5T SMYE5 SSY5T CKC5 0,39 .86
Threading
L1 F D min
WID_Master16_Turning_Threading_F070_F071_Metric_REBRAND.indd 71 10/30/15 3:38 PM
widia.com
F72
LViWID M 16 T i Th di F072 F073 M i REBRANDN b 12 201511 50AM
Laydown Threading
KM™ Units
LSS 90°
NOTE: Cutting units are supplied with insert screw and clamp assembly. However, tools are designed to use either the insert screw or the clamp assembly, not both.
L1 F
order number catalogue number mm in mm in
gage
insert
insert
screw shim
shim
screw
clamp
assembly kg lbs
right hand
3950857 KM40TSLSSR16 40 1.575 27 1.063 LT16ER SSA3T SMYE3 SSY3T CKC3 0,31 .68
3950858 KM40TSLSSR22 40 1.575 27 1.063 LT22ER SSA4T SMYE4 SSY4T CKC4 0,30 .66
3959401 KM40TSLSSR27 45 1.772 27 1.063 LT27ER SSA5T SMYE5 SSY5T CKC5 0,37 .82
left hand
3950855 KM40TSLSSL16 40 1.575 27 1.063 LT16EL SSA3T SMYI3 SSY3T CKC3 0,32 .70
3950856 KM40TSLSSL22 40 1.575 27 1.063 LT22EL SSA4T SMYI4 SSY4T CKC4 0,31 .68
3959400 KM40TSLSSL27 45 1.772 27 1.063 LT27EL SSA5T SMYI5 SSY5T CKC5 0,37 .82
Threading
L1 F
WID_Master16_Turning_Threading_F072_F073_Metric_REBRAND.indd 72 11/12/15 11:52 AM
widia.com F73
LViWID M 16 T i Th di F072 F073 M i REBRANDN b 12 201511 50AM
Laydown Threading
Boring Bar Identifi cation System
symbol d L1
2 6,35 11
3 9,52 16
4 12,7 22
5 15,88 27
AVR203R
AVR 203R
Shim
Requirement
Tool Type Coolant
Capability
Shank Head
Diameter
Insert
Size
Hand of
Tool
A —
Shim required
C —
With coolant
10, 12, 13, 16, 20,
25, 32, 40, 50
RH —
Thread symbol R
N —
No shim required
6.2 (Mini adjust) LH —
Thread symbol L
O —
Miniature holder
8.0 (Mini adjust)
VR — Internal round shank
d
L1
Laydown Threading
Catalogue Numbering System
WID_Master16_Turning_Threading_F072_F073_Metric_REBRAND.indd 73 11/12/15 11:52 AM
F74
LViWID M 16 T i Th di F074 F075 M i REBRAND N b 13 2015 3 41 PM
widia.com
Laydown Threading
Boring Bars
N/A-VR
order number catalogue number insert size D D min D2 F L1 L2 aF° aP° shim
shim
screw Torx
insert
screw Torx
right hand
2025828 NVR102R 2 20 13 10 7 180 25 -15,0° -1,5 ———SSN2T T8
2022342 NVR132R 2 20 16 13 9 180 32 -15,0° -1,5 ———SSN2T T8
2012307 NVR163R 3 20 20 16 12 180 40 -15,0° -1,5 SMYI3 SSY3T T10 SSA3T T10
2009609 AVR203R 3 20 24 20 13 180 50 -15,0° -1,5 SMYI3 SSY3T T10 SSA3T T10
2022343 NVR204R 4 20 27 20 16 180 50 -15,0° -1,5 SMYI4 SSY4T T20 SSA4T T20
2009628 AVR25D3R 3 25 29 25 16 200 45 -15,0° -1,5 SMYI3 SSY3T T10 SSA3T T10
2009631 AVR25D4R 4 25 32 25 17 200 45 -15,0° -1,5 SMYI4 SSY4T T20 SSA4T T20
2009612 AVR253R 3 32 29 25 16 250 60 -15,0° -1,5 SMYI3 SSY3T T10 SSA3T T10
2009625 AVR254R 4 32 32 25 17 250 60 -15,0° -1,5 SMYI4 SSY4T T20 SSA4T T20
2009640 AVR32D3R 3 32 36 32 20 250 60 -15,0° -1,5 SMYI3 SSY3T T10 SSA3T T10
2009634 AVR324R 4 32 39 32 22 250 60 -15,0° -1,5 SMYI4 SSY4T T20 SSA4T T20
2009637 AVR325R 5 32 40 32 22 250 60 -15,0° -1,5 SMYI5 SSY5T T25 SSA5T T25
2009643 AVR403R 3 40 44 40 24 300 60 -15,0° -1,5 SMYI3 SSY3T T10 SSA3T T10
2009646 AVR405R 5 40 48 40 26 300 60 -15,0° -1,5 SMYI5 SSY5T T25 SSA5T T25
2009649 AVR505R 5 50 58 50 31 350 75 -15,0° -1,5 SMYI5 SSY5T T25 SSA5T T25
left hand
2071317 NVR163L 3 20 20 16 12 180 40 -15,0° -1,5 SMYE3 SSY3T —SSA3T T10
2071318 AVR203L 3 20 24 20 13 180 40 -15,0° -1,5 SMYE3 SSY3T T10 SSA3T T10
2065134 AVR25D3L 3 25 29 25 16 200 45 -15,0° -1,5 SMYE3 SSY3T T10 SSA3T T10
2065135 AVR25D4L 4 25 32 25 17 200 45 -15,0° -1,5 SMYE4 SSY4T T20 SSA4T T20
2114832 AVR253L 3 32 29 25 16 250 60 -15,0° -1,5 SMYE3 SSY3T T10 SSA3T T10
Right Hand Tool
Steel shank
without through
coolant.
See page F42
for inserts.
Threading
NOTE: Items listed without a shim are designed for a 1,5° inclination angle.
WID_Master16_Turning_Threading_F074_F075_Metric_REBRAND.indd 74 11/13/15 4:27 PM
F75
LViWID M 16 T i Th di F074 F075 M i REBRANDN b 13 20153 41PM
widia.com
Laydown Threading
Boring Bars
OVR
NOTE: WIDIA
™
miniature holders are for use on automatic machines as used in the optical and precision mechanics industries. The shank dimensions correspond to
conventional hardmetal or HSS tools. Holders with round or square shanks are available. An internal RH tool can also be used for external LH threads in the same
way an internal LH tool can be used for external RH threads. Please use correct inserts. The inclination angle on this tool is 0,5°. Tools are always clamped with
the shank parallel to the part.
order number catalogue number
insert
size D D min D2 F L1 L2 aF° aP° screw
Torx
driver Torx
right hand
2012325 OVR122R 2 12 13 10 7 100 25 -15,0° -0,5 12147789100 12148001100 T8
2022345 OVR152R 2 15 16 13 9 100 32 -15,0° -0,5 12147789100 12148001100 T8
Threading
See page F42
for inserts.
WID_Master16_Turning_Threading_F074_F075_Metric_REBRAND.indd 75 11/13/15 4:27 PM
F76
LViWID M 16 T i Th di F076 F077 M i REBRAND O b 15 2015 10 59 AM
widia.com
Laydown Threading
KM™ Units
LSE 90°
D min D2 F L4 L1
order number catalogue number mm in mm in mm in mm in mm in
gage
insert kg lbs
right hand
3955464 KM40TSS10DLSER11 13 .51 10 .39 7 .276 35 1.38 60 2.362 LT11NR 0,22 .49
3955466 KM40TSS12ELSER11 16 .63 12 .47 9 .354 42 1.66 70 2.756 LT11NR 0,25 .56
3955468 KM40TSS16FLSER16 20 .79 16 .63 11 .433 56 2.21 80 3.150 LT16NR 0,28 .61
3955470 KM40TSS20GLSER16 25 .98 20 .79 13 .512 70 2.76 90 3.543 LT16NR 0,34 .75
3955472 KM40TSS25HLSER16 32 1.26 25 .98 17 .669 75 2.95 100 3.937 LT16NR 0,50 1.11
3955474 KM40TSS32JLSER16 40 1.57 32 1.26 22 .866 96 3.78 110 4.331 LT16NR 0,72 1.58
3955476 KM40TSS32JLSER22 40 1.57 32 1.26 22 .866 96 3.78 110 4.331 LT22NR 0,71 1.56
left hand
3955463 KM40TSS10DLSEL11 13 .51 10 .39 7 .276 35 1.38 60 2.362 LT11NL 0,22 .49
3955465 KM40TSS12ELSEL11 16 .63 12 .47 9 .354 42 1.65 70 2.756 LT11NL 0,25 .55
3955467 KM40TSS16FLSEL16 20 .79 16 .63 11 .433 56 2.21 80 3.150 LT16NL 0,28 .61
3955469 KM40TSS20GLSEL16 25 .98 20 .79 13 .512 70 2.76 90 3.543 LT16NL 0,34 .75
3955471 KM40TSS25HLSEL16 32 1.26 25 .98 17 .669 75 2.95 100 3.937 LT16NL 0,50 1.11
3955473 KM40TSS32JLSEL16 40 1.57 32 1.26 22 .866 96 3.78 110 4.331 LT16NL 0,72 1.58
3955475 KM40TSS32JLSEL22 40 1.57 32 1.26 22 .866 96 3.78 110 4.331 LT22NL 0,71 1.56
Threading
(continued)
D min D 2 F L4 L1
WID_Master16_Turning_Threading_F076_F077_Metric_REBRAND.indd 76 10/30/15 3:38 PM
F77
LViWID M 16 T i Th di F076 F077 M i REBRANDO b 15 201510 59AM
widia.com
Laydown Threading
KM™ Units
catalogue number
insert
screw shim
shim
screw
clamp
assembly
right hand
KM40TSS10DLSER11 SSN2T — — —
KM40TSS12ELSER11 SSN2T — — —
KM40TSS16FLSER16 SN3TPKG — — —
KM40TSS20GLSER16 SSA3T SMYI3 SSY3T CKC3
KM40TSS25HLSER16 SSA3T SMYI3 SSY3T CKC3
KM40TSS32JLSER16 SSA3T SMYI3 SSY3T CKC3
KM40TSS32JLSER22 SSA4T SMYI4 SSY4T CKC4
left hand
KM40TSS10DLSEL11 SSN2T — — —
KM40TSS12ELSEL11 SSN2T — — —
KM40TSS16FLSEL16 SN3TPKG — — —
KM40TSS20GLSEL16 SSA3T SMYE3 SSY3T CKC3
KM40TSS25HLSEL16 SSA3T SMYE3 SSY3T CKC3
KM40TSS32JLSEL16 SSA3T SMYE3 SSY3T CKC3
KM40TSS32JLSEL22 SSA4T SMYE4 SSY4T CKC4
Spare Parts
NOTE: Items listed without a shim are designed for a 1,5° inclination angle.
Cutting units are supplied with insert screw and clamp assembly. However, tools are designed to use either the insert screw or the clamp assembly, not both.
(LSE 90º — continued)
Threading
WID_Master16_Turning_Threading_F076_F077_Metric_REBRAND.indd 77 10/30/15 3:38 PM
F78
LViWID M 16 T i Th di F078 F079 M i REBRAND O b 15 2015 11 00 AM
widia.com
2P 2º positive
1P 1º positive
—0º
1N 1º negative
2N 2º negative
3N 3º negative
SM — Y E 3 — 2N
Shim Y-shim for
Laydown
standard inserts
E — External
I — Internal
iC — 16mm Shim Angle
insert size and screw insert screw shim shim screw and washer clamp assembly
3ER S-SA3T SM-YIE3 S-SY3T CK-C3
3EL S-SA3T SM-YI3 S-SY3T CK-C3
4ER S-SA4T SM-YIE4 S-SY4T CK-C4
4EL S-SA4T SM-YI4 S-SY4T CK-C4
Laydown Threading boring bars
2IR S-SN2T — — —
2IL S-SN2T — — —
3IR S-SA3T SM-YI3 S-SY3T CK-C3
3IL S-SA3T SM-YIE3 S-SY3T CK-C3
4IR S-SA4T SM-YI4 S-SY4T CK-C4
4IL S-SA4T SM-YIE4 S-SY4T CK-C4
Laydown Threading Toolholders
In all cases, the proper shim selection is important.
WIDIA
™
toolholders are supplied with a shim for a 1,5° lead angle. Change the shim if your thread
is more than 1° different. For more details on proper shim selections, see pages F100–F101.
shim
insert
clamp assembly
shim screw
shim
insert
insert screw
shim screw
Laydown Threading
Hardware
WID_Master16_Turning_Threading_F078_F079_Metric_REBRAND.indd 78 10/30/15 3:38 PM
F79
LViWID M 16 T i Th di F078 F079 M i REBRANDO b 15 201511 00AM
widia.com
Slanted Shim Kit
Technical Information
Screw Thread Defi nitions
Screw Thread Defi nitions
Because you might occasionally need different shims than those
supplied with our standard toolholders, we strongly recommend
that shim kits be readily available in every tool shop.
1. Major diameter — The largest diameter of a straight screw
thread. This applies to both internal and external threads.
2. Pitch diameter — On a straight thread, it is the diameter which
passes through the thread pro les at such points which make
the thread width of the groove equal to one-half of the basic
pitch. On a “perfect thread,” this occurs at the point where the
widths of the thread and groove are equal.
3. Thread angle (included) — The included angle between
the individual anks of the thread form.
4. Minor diameter — The smallest diameter of a straight screw
thread. This applies to both internal and external threads.
5. Lead angle — On a straight thread, the lead angle is the angle
created by the helix of the thread at the pitch diameter with
a plane perpendicular to the axis.
6. Lead — The distance a screw thread advances axially in one
revolution. On a single start, the pitch and lead are identical.
The lead is equal to the pitch times the number of starts.
7. Pitch — The distance from a point on a screw thread to a
corresponding point on the next thread measured parallel
to the thread axis.
8. Crest — The outer most surface of the thread form which
joins the anks.
9. Root — The inner most surface of the thread form which
joins the anks.
insert size shim size (D) ordering code contains slanted shims
3x 16mm ABY3 SM-YE3-2P, 1P, 1N, 2N, 3N
SM-YI3-2P, 1P, 1N, 2N, 3N
4x 22mm ABY4 SM-YE4-2P, 1P, 1N, 2N, 3N
SM-YI4-2P, 1P, 1N, 2N, 3N
resultant angle 3.5º 2.5º 1.5º 0.5º -0.5º -1.5º
insert size (iC) toolholder shim ordering code
16mm ex. RH/in. LH
ex. LH/in. RH SM-YE3-2P
SM-YI3-2P SM-YE3-1P
SM-YI3-1P SM-YE3
SM-YI3 SM-YE3-1N
SM-YI3-1N SM-YE3-2N
SM-YI3-2N SM-YE3-3N
SM-YI3-3N
22mm ex. RH/in. LH
ex. LH/in. RH SM-YE4-2P
SM-YI4-2P SM-YE4-1P
SM-YI4-1P SM-YE4
SM-YI4 SM-YE4-1N
SM-YI4-1N SM-YE4-2N
SM-YI4-2N SM-YE4-3N
SM-YI4-3N
nut
lead angle
lead
pitch
crest
root
screw
thread angle
included
minor diameter
pitch diameter
major diameter
NOTE: Threads per inch (TPI) not shown:
The number of threads per inch measured axially.
The terms pitch and TPI are often used interchangeably. TPI = 1/pitch
Example:
d = 48,06mm (1.892")
p = 3,175mm ( .125")
q = Helix angle
p = pitch
d = pitch diameter
p * starts
/
q = arctan = 1.13°
( )
The Helix Angle
WID_Master16_Turning_Threading_F078_F079_Metric_REBRAND.indd 79 10/30/15 3:38 PM
F80
LViWID M 16 T i Th di F080 F081 M i REBRAND O b 15 2015 11 00 AM
widia.com
ISO M (Metric) and UN (Unifi ed National) UNJ (controlled root radius) Whitworth (BSW)
American Buttress NPT (American National Pipe Thread) BSPT (British Standard Pipe Thread)
TR DIN 103 Acme Acme, truncated (Stub)
Use: All branches of mechanical industry. Use: Aircraft and space industry.
Use: Fittings and pipe couplings for gas, water, and
sewer lines (replaced by ISO).
Use: Fittings and pipe couplings. Use: Fittings and pipe couplings. Use: Pipe thread for steam, gas, and water lines.
Use: Mechanical industry for motion
transmission screws.
A = 0,0307 P
B = 0,3707 P—x D play
C = 0,3707 P—(D1 play—D2 play)
Use: Acme-General is used in mechanical industry for
motion transmission screws.
A = 0,4224 P
B = 0,4224 P—x D play
C = 0,4224 P—(D1 play—D2 play)
Use: Where normal Acme is too deep.
Technical Information
Common Thread Forms
pitch
line
taper = 62,5mm per metre on diameter
1/2 D play
1/2 D1 play 1/2 D2 play
1/2 D play
1/2 D1 play 1/2 D2 play
nut
screw
axis of screw
taper 1:16
axis of screw taper 1:16
1/2 D play
1/2 D1 play 1/2 D2 play
API Casing and Tubing Round Thread Form
NOTE: Taper shown exaggerated.
WID_Master16_Turning_Threading_F080_F081_Metric_REBRAND.indd 80 10/30/15 3:38 PM
F81
LViWID M 16 T i Th di F080 F081 M i REBRANDO b 15 201511 00AM
widia.com
Technical Information
Grade Selection Chart
Suggested Grades and Speeds for Threading
Various Workpiece Materials
workpiece group workpiece material
recommended surface speed — SFM
uncoated PVD coated
THM TN6010 TN6025
free-machining
carbon steel
10L18, 10L45, 1213, 12L13,
12L14, 1140, 1141, 11L44,
1151, 10L50
— 91–98 45–198
plain carbon steel
10063, 1008, 1010, 1015,
1018, 1020, 1025, 1026,
1108, 1117
— 76–198 45–175
alloy steels/tool steels
150–325 HB
(up to 35 HRC) 1042, 1045, 1070, 1080, 1085,
1090, 1095, 1541, 1561, 1572,
5140, 8620, W1, O1, S1, P20,
H13, D2, A6, H13, L6
— 76–198 38–167
alloy steels/tool steels
330–450 HB
(36–47 HRC)
— 61–160 —
martensitic/ferritic
stainless/precipitation
hardening
416, 420F, 440F, 405, 409, 429,
430, 434, 436, 442, PH — 45–160 30–120
austenitic stainless steel
201, 202, 301, 302, 303, 304,
304, 305, 321, 347, 348, 310,
314, 316, 316L, 330
61–106 61–198 46–137
grey cast iron
135–270 HB class 20, 30, 35, 45 61–91 61–237 46–122
grey cast iron
275–450 HB class 50, 55, 60 45–76 45–175 15–76
alloy/ductile iron A536, J434C, 60-40-18,
80-55-06, 100-70-03 45–76 45–650 100–525
free-machining
aluminium alloys
2024-T4, 2014-T6, 6061-T6
2011-T3, 3003-H18, A2, Alcan,
Alcoa 510, Duralumin
122—244 122—265 —
high-silicon
aluminium alloys
A380, A390, A380-1,
A390-1, A380-2 ———
copper/zinc/brass 76–183 76–304 46–236
non-metallics Graphite, Nylon, Plastics,
Rubbers, Phenolics, Carbon 122–457 122–396 46–305
high-temperature alloys
125–269 HB
(up to 27 HRC)
Nickel 200, Monel, R405,
Monel K500, INCONEL 600,
INCONEL
®
625/901x750/718,
Waspaloy, Hastelloy C
24–37 24–122 13–76
high-temperature alloys
260–450 HB
(26–47 HRC)
Rene 95, Waspaloy A286,
Incoloy 800, Haynes 188,
Stellite F, Haynes 25
24–30 30–76 6—61
titanium alloys Ti-6AI-4V, TI-5AI-2.5Sn 34–55 34–99 —
NOTE: When workpiece hardness levels are at the top of a range, starting m/min
should be at the lower end. Regularly inspect insert clamps for worn fl ats.
Edge preparation:
Uncoated — sharp
PVD coated — light hone except positive top rake,
top rake-sharp
WID_Master16_Turning_Threading_F080_F081_Metric_REBRAND.indd 81 10/30/15 3:38 PM
F82
LViWID M 16 T i Th di F082 F083 M i REBRAND O b 15 2015 11 00 AM
widia.com
Technical Information
Failure and Solution Guide
problem cause possible solution
thread with torn nish
• Burs.
• To rn nish.
• Steps.
• Improper shim.
• Improper infeed.
• Use modi ed ank infeed.
• Use full pro le insert.
• Increase coolant concentration.
• Increases m/min.
• Check machine “Z” travel axis.
• Check insert form.
• Check for correct shim in LT system.
• Calculate ank clearance.
chatter
• Poor rigidity.
• Insert movement.
• Improper infeed.
• Off centreline.
• Use modi ed ank infeed.
• Minimise tool overhang.
• Check for workpiece de ection.
• Check insert and clamp.
• Verify that tool cutting position is at workpiece centreline.
• Adjust number of passes. Fewer passes reduce chatter.
built-up edge
• Speed too low.
• Insuf cient coolant.
• Chip load.
• Increase m/min.
• Increase coolant concentration and/or ow.
• Adjust infeed angle.
• Increase depth of cut per pass.
deformation
• Wrong grade.
• Speed too high.
• Improper infeed angle.
• Insuf cient coolant.
• Use modi ed ank infeed.
• Use a more wear-resistant grade (e.g., TN6010
™
).
• Reduce m/min.
• Increase coolant ow.
chipping
• Improper infeed.
• Chip load.
• Wrong grade.
• Incorrect speed.
• Poor rigidity.
• Use modi ed ank infeed.
• Increase or decrease number of passes.
• Eliminate spring passes.
• Use tougher grade (e.g., TN6025
™
).
• Increase m/min if chipping on trailing edge.
• Decrease m/min if chipping on leading edge.
• Minimise tool overhang.
• Check for insert movement/check clamp. Torque screw
or clamp to correct value.
• Check for possible part de ection.
• Calculate ank clearance.
• Ensure correct shim.
broken nose
• Heavy chip load.
• Small nose radius.
• Wrong grade.
• Improper infeed.
• Use modi ed ank infeed.
• Decrease chip load.
• Use large nose radius if possible.
• Use tougher grade (e.g., TN6025).
ank wear
• Improper shim.
• Wrong grade.
• Insuf cient coolant.
• Off centreline.
• Insuf cient ank clearance.
• Improper infeed angle.
• Ensure correct shim.
• Use a more wear-resistant grade (e.g., TN6025).
• Increase coolant ow.
• Check the centreline height of the tool. (The smaller the diameter, the
more critical the need for centreline accuracy.)
• Calculate ank clearance and change shim to increase clearance on
worn ank.
• If wear is on trailing ank, increase infeed angle clearance.
WID_Master16_Turning_Threading_F082_F083_Metric_REBRAND.indd 82 10/30/15 3:38 PM
F83
LViWID M 16 T i Th di F082 F083 M i REBRANDO b 15 201511 00AM
widia.com
Technical Information
Failure and Solution Guide
problem
possible solution
increase m/min
reduce m/min
increase chip load
decrease chip load
where failure occurs
use tougher
carbide grade
use harder
carbide grade
apply coolant
use coated carbide
use topping insert
change infeed angle
check for insert
movement and reseat
reduce tool overhang
reselect shim
apply chipbreaker style
reduce DOC
adjust centre height
begin cutting threads
12mm before workpiece
change infeed method
chatter
bur on crest
short tool life
chipped leading edge
chipped trailing edge
broken nose
( rst pass)
broken nose
(after rst pass)
built-up on cutting edge
premature topping
splitting threads
poor chip evacuation
WID_Master16_Turning_Threading_F082_F083_Metric_REBRAND.indd 83 10/30/15 3:38 PM
F84
LViWID M 16 T i Th di F084 F085 M i REBRAND O b 15 2015 11 01 AM
widia.com
The Last Pass
Machine Programming
Infeed Angle
WIDIA
™
insert technology brings chip control to your threading operations
with the TopThread
™
platform. The proprietary WIDIA recessed chip groove,
when used according to our recommendations, controls the chip in most
applications. Our positive rake design lowers cutting pressures, which in
turn lowers damaging heat generation thus providing better tool life. Long,
stringy chips no longer mar the workpiece surface nish. The danger to
operators when removing long chips from the workpiece and chuck is
eliminated. All of these bene ts combine to improve the productivity
of your threading operations.
Some CNC controls require the last pass to be at a 0° infeed angle because
the chip will not break on the last pass. On most carbon and alloy steels, the
last pass can remain at 0,127mm depth of cut and produce an acceptable
nish. For some materials, a 0,025mm to 0,076mm (spring) pass may
be used to improve surface nish, however, chipbreaking action
may be compromised.
Modern CNC controls allow the programmer to easily adjust infeed angle, the
number of passes, and depth of cut for each pass. The chip control threading
insert performs best at an infeed angle of 29° 30’, although 15° to 30° is
acceptable. Also, it is important to maintain a minimum of 0,127mm depth
of cut on every pass. In most applications, use of CNC canned cycles
produce only marginally successful results. Custom written programmes
are better and are recommended.
In order to effectively and consistently break the chip, it is important to use
an infeed angle between 28° and 29° 30'. Do not apply chip control inserts
at infeed angles less than 15°.
angle of
thread
modi ed ank
Technical Information
General Machining Guidelines
WID_Master16_Turning_Threading_F084_F085_Metric_REBRAND.indd 84 10/30/15 3:39 PM
F85
LViWID M 16 T i Th di F084 F085 M i REBRANDO b 15 201511 01AM
widia.com
Technical Information
General Machining Guidelines
Radial Modifi ed fl ank Alternating fl ank Reversed modifi ed fl ank
Advantage — Advantage — Advantage — Advantage —
• Cutting on both sides of the thread
form places all of the cutting edge
in the cut and protects edge from
chipping.
• Even wear on the insert.
• Tool cuts both sides of thread form,
so it is protected from chipping
similar to 0° infeed. Channel-type
chip develops, but uneven chip
thickness helps remove the chip
similar to ank infeed.
• This is the preferred method,
especially when used with a chip
control insert.
• Combined radial and/or alternating
ank infeed.
• Results in good tool life, with wear
evenly distributed over both anks.
• Increased tool life because both
edges are used equally.
NOTE: Some machine tools may
require special programming
techniques to achieve this
method of infeed.
• Tool cuts both sides of thread form,
so it is protected from chipping
similar to 0° infeed. Channel-type
chip develops, but uneven chip
thickness helps remove the chip
similar to ank infeed.
• This is the preferred method,
especially when used with a chip
control insert.
• Combined radial and/or alternating
ank infeed.
• Results in good tool life, with wear
evenly distributed over both anks.
• As chip ow is the reversed feed
direction, it is an excellent choice
for internal threading.
Disadvantage — Disadvantage — Disadvantage — Disadvantage —
• Tool develops a channel chip that
may be dif cult to handle.
• Tip chipping occurs when cutting
high-tensile materials.
• Bur condition is increased.
• Entire cutting edge is engaged at
nish of thread, causing increased
tendency to chatter.
• Similar disadvantages as with 0°
infeed, although reduced somewhat
in magnitude as cutting forces are
better equalised and chip ow is
much less of a problem.
• Dif cult to cut on conventional
machinery.
• Programming needs to be done
line by line.
modi ed ank
angle of
infeed
alternating ank
modi ed ank
angle of
infeed
modi ed ank
15º–29º 30'
angle of
infeed
15º–29º 30'
WID_Master16_Turning_Threading_F084_F085_Metric_REBRAND.indd 85 10/30/15 3:39 PM
F86
LViWID M 16 T i Th di F086 F087 M i REBRAND N b 11 2015 8 24 AM
widia.com
Partial Profi le Full Profi le Multi-Tooth Profi le
Tooth profi le with universal
profi le shape:
Tooth profi le with full profi le shape
including tooth height:
Multi-tooth full profi le
generally with 2–3 teeth:
• 55° or 60° without cutting edges
for the tooth tapers.
• Reduced inventory.
• For various pitches in a limited range.
• Preferably one time production.
• Major/minor diameters must be
accurately pre-turned.
• For bur-free, precise threads in the speci ed
pitch.
• General application.
• Machining allowance for outside/core diameter
around 0,1–0,15mm.
• Highly productive threading with
fewer passes and longer tool life.
• Requires a rigid setup and long thread
pass through.
• Minimum clearance width approximately
1.25 x E as per indexable insert
dimensions table.
Formulas
Legend
Maximum Cutting Speeds
m/min = metres per minute
RPM = revolutions per minute
D = part diameter
/ = 3.1416
Technical Information
Threading
Metric Formula
to fi nd given formula
m/min D (mm)
RPM
/ x D
m/min = x RPM
1000
RPM D (mm)
m/min
m/min x 1000
RPM =
D x /
On older machines, cutting speed is often limited by the maximum
travel speed mm/min of the tool allowed by the machine.
Check your maximum speed with the following formulas:
metric formula: maximum cutting speed (m/min) =
part diameter (mm) x 3.14 x (1/pitch) x max mm/min
1000mm
Flank clearance
a = arctan (sin`/2) * tan(_))
a = side ( ank) clearance
` = included angle of thread form
_ = radial inclination angle
Thread Angle External Internal
UN & ISO 60 5.3 8
BSW 55 4.8 7.3
TR 30 2.6 4
ACME 29 2.6 3.9
AMBUT 7.6.9
AMBUT 45 4 6
WID_Master16_Turning_Threading_F086_F087_Metric_REBRAND.indd 86 11/11/15 9:29 AM
F87
LViWID M 16 T i Th di F086 F087 M i REBRANDN b 11 20158 24AM
widia.com
Technical Information
Threading
TPI 48–32 28–24 20–16 14–12 11.5–9 8–6 5–4 3–2
metric pitch (mm) 0,50–0,75 0,80–1 1,25–1,5 1,75–2 2,5–3 3,5–4 4,5–6 8
Thread Type recommended number of passes
Common V-thread forms ISO, UN, UNJ, NPT, Whitworth, BSPT, API Rotary Shoulder 4–5 5–6 6–8 8–10 9–12 12–15 14–16 15–25
Acme, Trapez, Round, API Round — — 5–6 7–8 10–11 12–13 13–15 18–20
Stub Acme, API Buttress — — 5 5–6 7–8 8–10 10–12 14–16
American Buttress — — 7–8 9–10 11–12 13–15 17–19 22–24
Recommendation for Threading Infeed Passes
Constant Volume Infeed Values for Threading Operations
Using Radial Infeed Using Flank Infeed
Guidelines for Infeeds —
How to Determine the Number and the Size of Passes
Bending stress on the cutting edge caused by V-shaped chips
from long-chipping steel workpiece materials.
High cutting forces with small cutting thicknesses require sharp
edges with high strength.
Lower bending stress and stabilised cutting edges produce
more favourable chip shapes and larger cutting thicknesses.
Carbides with high hardness, good wear resistance,
and temperature stability are advantageous.
The number of passes “s” per thread is decisive for successful threading
and crest turning. The following tables give standard values for the
application condition when machining steel. The proper number
of passes must be determined empirically.
Maintain minimum 0,05mm infeed on last passes to avoid work hardening and excessive abrasion of the threading tool.
If insert breakage occurs, the number of passes must be increased. With
increased wear, we recommend decreasing the number of passes. The chip
thickness should not be less than 0,05mm. The allowance at the diameter
should not exceed 0,2mm.
In most applications, use of CNC canned cycles produces only marginally
successful results. For example, an 8-pitch external thread has a depth of
2mm (.0789").
6apx = ap
nap-1
q
*
Formula for constant chip load infeed
6ap = radial infeed
x = actual pass (from 1 to the nap)
nap = number of passes
q = 1st pass, 0.3
2nd pass, 1
3rd pass and up, x-1
WID_Master16_Turning_Threading_F086_F087_Metric_REBRAND.indd 87 11/11/15 9:29 AM
widia.com
F88
LViWID M 16 T i Th di F088 F089 M i REBRAND N b 11 2015 5 23 PM
Technical Information
Threading Infeed Tables
Metric ISO, External Thread Cutting
Metric ISO, Internal Thread Cutting
pitch (mm) 0,50 0,75 1,00 1,25 1,50 1,75 2,00 2,50 3,00 3,50 4,00 4,50 5,00
T Ap (mm) 0,305 0,457 0,610 0,762 0,914 1,067 1,219 1,524 1,829 2,159 2,464 2,769 3,073
N Ap 4456688101214151516
values for ank infeed (X/Z)
order
of passes X/Z X/Z X/Z X/Z X/Z X/Z X/Z X/Z X/Z X/Z X/Z X/Z X/Z
10,096 0,145 0,167 0,187 0,224 0,221 0,252 0,278 0,302 0,328 0,361 0,405 0,435
20,080 0,119 0,138 0,154 0,185 0,182 0,208 0,230 0,249 0,271 0,298 0,335 0,359
30,073 0,109 0,126 0,141 0,169 0,167 0,191 0,210 0,228 0,248 0,273 0,306 0,329
40,056 0,084 0,097 0,108 0,130 0,128 0,146 0,161 0,175 0,190 0,209 0,235 0,252
50,082 0,091 0,110 0,108 0,123 0,136 0,148 0,160 0,176 0,198 0,213
60,080 0,097 0,095 0,109 0,120 0,130 0,141 0,155 0,175 0,187
70,086 0,098 0,108 0,118 0,128 0,141 0,158 0,169
80,079 0,090 0,100 0,108 0,118 0,129 0,145 0,156
90,093 0,101 0,109 0,120 0,135 0,145
10 0,087 0,095 0,103 0,113 0,127 0,136
11 0,089 0,097 0,107 0,120 0,129
12 0,085 0,092 0,102 0,114 0,122
13 0,088 0,097 0,109 0,117
14 0,085 0,093 0,105 0,112
15 0,090 0,101 0,108
16 0,104
T Ap (mm) 0,305 0,457 0,610 0,762 0,914 1,067 1,219 1,524 1,829 2,159 2,464 2,769 3,073
thread
pitch P (mm) 0,50 0,75 1,00 1,25 1,50 1,75 2,00 2,50 3,00 3,50 4,00 4,50 5,00
T Ap (mm) 0,279 0,406 0,533 0,686 0,813 0,940 1,092 1,346 1,626 1,905 2,159 2,438 2,718
N Ap 4456688101112141516
values for ank infeed (X/Z)
order
of passes X/Z X/Z X/Z X/Z X/Z X/Z X/Z X/Z X/Z X/Z X/Z X/Z X/Z
10,088 0,129 0,146 0,168 0,199 0,195 0,226 0,246 0,282 0,315 0,328 0,357 0,384
20,073 0,106 0,121 0,139 0,164 0,161 0,187 0,203 0,232 0,260 0,271 0,295 0,317
30,067 0,097 0,110 0,127 0,151 0,147 0,171 0,186 0,213 0,238 0,248 0,270 0,291
40,051 0,075 0,085 0,097 0,116 0,113 0,131 0,143 0,163 0,183 0,190 0,207 0,223
50,071 0,082 0,097 0,095 0,111 0,120 0,138 0,154 0,160 0,175 0,188
60,072 0,086 0,084 0,097 0,106 0,121 0,136 0,141 0,154 0,166
70,076 0,088 0,096 0,110 0,123 0,128 0,139 0,150
80,070 0,081 0,088 0,101 0,113 0,118 0,128 0,138
90,082 0,094 0,105 0,109 0,119 0,128
10 0,077 0,088 0,099 0,103 0,112 0,120
11 0,083 0,093 0,097 0,106 0,114
12 0,000 0,089 0,092 0,101 0,108
13 0,000 0,088 0,096 0,103
14 0,000 0,085 0,092 0,099
15 0,000 0,089 0,096
16 0,092
T Ap (mm) 0,279 0,406 0,533 0,686 0,813 0,940 1,092 1,346 1,626 1,905 2,159 2,438 2,718
NOTE: Always allow 0,08–0,13mm extra stock for full profi le inserts.
NOTE: Always allow 0,08–0,13mm extra stock for full profi le inserts.
WID_Master16_Turning_Threading_F088_F089_Metric_REBRAND.indd 88 11/11/15 5:40 PM
widia.com F89
LViWID M 16 T i Th di F088 F089 M i REBRANDN b 11 20155 23PM
Technical Information
Threading Infeed Tables
UN Thread, External Thread Cutting
UN Thread, Internal Thread Cutting
TPI 24 20 18 16 14 12 11 10 9 8 7 6 5
T Ap (mm) 0,660 0,787 0,864 0,965 0,914 1,067 1,219 1,524 1,829 2,159 2,464 2,769 3,073
N Ap 5 6 6 7 9 9 10 11 12 13 14 15 16
values for ank infeed (X/Z)
order
of passes X/Z X/Z X/Z X/Z X/Z X/Z X/Z X/Z X/Z X/Z X/Z X/Z X/Z
10,181 0,193 0,212 0,216 0,177 0,207 0,223 0,264 0,302 0,341 0,374 0,405 0,435
20,149 0,159 0,175 0,178 0,146 0,171 0,184 0,218 0,249 0,282 0,309 0,335 0,359
30,137 0,146 0,160 0,163 0,134 0,156 0,168 0,200 0,228 0,258 0,283 0,306 0,329
40,105 0,112 0,123 0,125 0,103 0,120 0,129 0,153 0,175 0,198 0,217 0,235 0,252
50,088 0,094 0,103 0,106 0,087 0,101 0,109 0,129 0,148 0,167 0,183 0,198 0,213
60,083 0,091 0,093 0,076 0,089 0,096 0,114 0,130 0,147 0,161 0,175 0,187
70,084 0,069 0,080 0,087 0,103 0,118 0,133 0,146 0,158 0,169
80,063 0,074 0,080 0,095 0,108 0,122 0,134 0,145 0,156
90,059 0,069 0,074 0,088 0,101 0,114 0,125 0,135 0,145
10 0,070 0,083 0,095 0,107 0,117 0,127 0,136
11 0,078 0,089 0,101 0,111 0,120 0,129
12 0,085 0,096 0,105 0,114 0,122
13 0,092 0,101 0,109 0,117
14 0,097 0,105 0,112
15 0,101 0,108
16 0,104
T Ap (mm) 0,660 0,787 0,864 0,965 0,914 1,067 1,219 1,524 1,829 2,159 2,464 2,769 3,073
TPI 24 20 18 16 14 12 11 10 9 8 7 6 5
T Ap (mm) 0,584 0,686 0,762 0,864 0,991 1,143 1,245 1,372 1,524 1,727 1,956 2,286 2,743
N Ap 5667899101112131415
values for ank infeed (X/Z)
order
of passes X/Z X/Z X/Z X/Z X/Z X/Z X/Z X/Z X/Z X/Z X/Z X/Z X/Z
10,160 0,168 0,187 0,193 0,205 0,221 0,241 0,250 0,264 0,285 0,309 0,347 0,402
20,132 0,139 0,154 0,159 0,169 0,183 0,199 0,207 0,218 0,236 0,255 0,287 0,332
30,121 0,127 0,141 0,146 0,155 0,167 0,182 0,189 0,200 0,216 0,234 0,263 0,304
40,093 0,097 0,108 0,112 0,119 0,128 0,140 0,145 0,153 0,166 0,179 0,202 0,233
50,078 0,082 0,091 0,094 0,100 0,108 0,118 0,123 0,129 0,140 0,151 0,170 0,196
60,072 0,080 0,083 0,088 0,095 0,104 0,108 0,114 0,123 0,133 0,150 0,173
70,075 0,080 0,086 0,094 0,098 0,103 0,111 0,120 0,135 0,156
80,073 0,079 0,086 0,090 0,095 0,102 0,111 0,124 0,144
90,074 0,080 0,084 0,088 0,095 0,103 0,116 0,134
10 0,078 0,083 0,089 0,097 0,109 0,126
11 0,078 0,085 0,092 0,103 0,119
12 0,080 0,087 0,098 0,113
13 0,083 0,094 0,108
14 0,080 0,090 0,104
15 0,100
16
T Ap (mm) 0,584 0,686 0,762 0,864 0,991 1,143 1,245 1,372 1,524 1,727 2,036 2,286 2,743
NOTE: Always allow 0,08–0,13mm extra stock for full profi le inserts.
NOTE: Always allow 0,08–0,13mm extra stock for full profi le inserts.
WID_Master16_Turning_Threading_F088_F089_Metric_REBRAND.indd 89 11/11/15 5:40 PM
widia.com
F90
LViWID M 16 T i Th di F090 F091 M i REBRAND O b 15 2015 11 02 AM
Technical Information
Threading Infeed Tables
NPT Thread, External, and
Internal Machining
BSPT Thread, External, and
Internal Machining
Trapezoid Thread to DIN 103, External,
and Internal Machining
Round Thread to DIN 405, External,
and Internal Machining
TPI 27 18 14 11,5 8
T Ap (mm) 0,762 1,118 1,422 1,727 2,489
N Ap 6 8 10 12 14
values for ank infeed (X/Z)
order
of passes X/Z X/Z X/Z X/Z X/Z
10,187 0,231 0,260 0,285 0,378
20,154 0,191 0,214 0,236 0,312
30,141 0,175 0,196 0,216 0,286
40,108 0,134 0,151 0,166 0,219
50,091 0,113 0,127 0,140 0,185
60,080 0,100 0,112 0,123 0,163
70,090 0,101 0,111 0,147
80,083 0,093 0,102 0,135
90,087 0,095 0,126
10 0,081 0,089 0,118
11 0,085 0,112
12 0,080 0,107
13 0,102
14 0,098
15
16
T Ap (mm) 0,762 1,118 1,422 1,727 2,489
TPI 28 19 14 11
T Ap (mm) 0,584 0,864 1,168 1,448
N Ap 5 8 10 12
values for ank infeed (X/Z)
order
of passes X/Z X/Z X/Z X/Z
10,160 0,179 0,213 0,239
20,132 0,148 0,176 0,197
30,121 0,135 0,161 0,181
40,093 0,104 0,124 0,139
50,078 0,087 0,104 0,117
60,077 0,092 0,103
70,070 0,083 0,093
80,064 0,076 0,086
90,071 0,080
10 0,067 0,075
11 0,071
12 0,067
13
14
15
16
T Ap (mm) 0,584 0,864 1,168 1,448
pitch 1,5 2 3 4 5
T Ap (mm) 1,016 1,245 1,753 2,261 2,743
N Ap 6 8 10 12 14
values for ank infeed (X/Z)
order
of passes X/Z X/Z X/Z X/Z X/Z
10,249 0,258 0,320 0,373 0,417
20,206 0,213 0,264 0,308 0,344
30,188 0,195 0,242 0,282 0,315
40,144 0,150 0,186 0,217 0,242
50,122 0,126 0,157 0,183 0,204
60,107 0,111 0,138 0,161 0,180
70,100 0,125 0,145 0,162
80,092 0,115 0,134 0,149
90,107 0,125 0,139
10 0,100 0,117 0,131
11 0,111 0,123
12 0,105 0,117
13 0,112
14 0,108
15
16
T Ap (mm) 1,016 1,245 1,753 2,261 2,743
pitch 10 8 6
T Ap (mm) 1,321 1,626 2,159
N Ap 81012
values for ank infeed (X/Z)
order
of passes X/Z X/Z X/Z
10,273 0,297 0,357
20,226 0,245 0,294
30,207 0,224 0,270
40,159 0,172 0,207
50,134 0,145 0,174
60,118 0,128 0,154
70,107 0,116 0,139
80,098 0,106 0,128
90,099 0,119
10 0,093 0,112
11 0,106
12 0,100
13
14
15
16
T Ap (mm) 1,321 1,626 2,159
NOTE: Always allow 0,08–0,13mm extra stock for full profi le inserts. NOTE: Always allow 0,08–0,13mm extra stock for full profi le inserts.
NOTE: Always allow 0,08–0,13mm extra stock for full profi le inserts.
WID_Master16_Turning_Threading_F090_F091_Metric_REBRAND.indd 90 10/30/15 3:39 PM
widia.com F91
LViWID M 16 T i Th di F090 F091 M i REBRANDO b 15 201511 02AM
Multi-Tooth Threads, Internal
Recommendations for Steel Workpieces (<300 BHN)
ISO metric ISO UN Whitworth NPT
type 3M 2M 3M 2M 3M 2M 2M 3M 2M 3M 2M 2M 2M 3M 2M
pitch (mm) 1,0 1,5 1,5 2,0 2,0 3,0 — — — — — — — — —
TPI — — — — — — 16 16 12 12 8 11 11.5 11.5 8
total depth (mm) 0,609 0,838 0,838 1,168 1,168 1,778 0,939 0,939 1,245 1,245 1,880 1,575 1,753 1,753 2,540
pass 10mm 0,330 0,381 0,508 0,508 0,711 0,558 0,431 0,558 0,558 0,762 0,584 0,736 0,584 0,812 0,889
20,279 0,254 0,330 0,381 0,457 0,482 0,304 0,381 0,406 0,482 0,508 0,482 0,508 0,558 0,635
3— 0,203 — 0,279 — 0,431 0,203 — 0,279 — 0,431 0,355 0,355 0,381 0,558
4— — — — — 0,304 — — — — 0,355 — 0,304 — 0,457
total depth — on radius
catalogue number insert size TPI pro le 1st pass 2nd pass 3rd pass
NTC-8R/L8EM 8 8 UN 1,21 1,63 2,00
NTC-8R/L8IM 8 8 UN 1,19 1,55 1,88
NTC-8R/L10EM 8 10 UN 0,92 1,27 1,60
NTC-8R/L10IM 8 10 UN 0,90 1,22 1,52
NTC-8R/L12EM 8 12 UN 0,76 1,04 1,32
NTC-8R/L12IM 8 12 UN 0,76 0,93 1,20
NTC-8R/L14EM 8 14 UN 0,68 0,95 1,12
NTC-8R/L14IM 8 14 UN 0,60 0,78 1,04
NTC-8R/L16EM 8 8 16 UN 0,58 0,81 0,96
NTC-8R/L16IM 8 16 UN 0,50 0,68 0,93
NTC-8R/L18EM 8 18 UN 0,48 0,66 0,86
NTC-8R/L18IM 8 18 UN 0,48 0,60 0,83
NDC-68RDR/L-75M 8 8 round 1,47 1,65 1,85
NDC-61RDR/L-75M 8 10 round 1,11 1,29 1,45
NDC-88RDRD/L-75M 8 8 round 1,29 1,75 1,85
NDC-88VR/L-75M 8 8 NPT 1,01 1,72 2,45
NDC-8115VR/L-75M 8 11.5 NPT 0,96 1,37 1,70
NDN-814VR/L-75M 8 14 NPT 0,96 1,22 1,36
NOTE: Always allow 0,08–0,13mm extra stock for full profi le inserts.
NOTE: Always allow 0,08–0,13mm extra stock for full profi le inserts.
TPI 282019161412111098765
T Ap (mm) 0,584 0,813 0,813 0,864 1,016 1,346 1,473 1,626 1,803 2,032 2,311 2,718 3,251
N Ap 5668899101112141516
values for ank infeed (X/Z)
order
of passes X/Z X/Z X/Z X/Z X/Z X/Z X/Z X/Z X/Z X/Z X/Z X/Z X/Z
10,160 0,199 0,199 0,179 0,210 0,261 0,285 0,297 0,312 0,336 0,351 0,398 0,460
20,132 0,164 0,164 0,148 0,174 0,215 0,236 0,245 0,258 0,277 0,290 0,329 0,380
30,121 0,151 0,151 0,135 0,159 0,197 0,216 0,224 0,236 0,254 0,266 0,301 0,348
40,093 0,116 0,116 0,104 0,122 0,151 0,166 0,172 0,181 0,195 0,204 0,231 0,267
50,078 0,097 0,097 0,087 0,103 0,128 0,140 0,145 0,153 0,164 0,172 0,195 0,225
60,086 0,086 0,077 0,091 0,112 0,123 0,128 0,135 0,145 0,151 0,171 0,198
70,070 0,082 0,102 0,111 0,116 0,122 0,131 0,137 0,155 0,179
80,064 0,075 0,093 0,102 0,106 0,112 0,120 0,126 0,143 0,165
90,087 0,095 0,099 0,104 0,112 0,117 0,133 0,153
10 0,093 0,098 0,105 0,110 0,125 0,144
11 0,093 0,099 0,104 0,118 0,136
12 0,095 0,099 0,112 0,130
13 0,095 0,107 0,124
14 0,091 0,103 0,119
15 0,099 0,114
16 0,110
T Ap (mm) 0,584 0,813 0,813 0,864 1,016 1,346 1,473 1,626 1,803 2,032 2,311 2,718 3,251
Whitworth, External, and Internal Thread Cutting
Technical Information
Threading Infeed Tables
WID_Master16_Turning_Threading_F090_F091_Metric_REBRAND.indd 91 10/30/15 3:39 PM
F92
LViWID M 16 T i Th di F092 F093 M i REBRAND N b 11 2015 5 24 PM
widia.com
The following charts list the largest thread pitch that can be applied on
internal applications using TopThread threading inserts for 60° V-threading
and Acme threading.
minimum minor diameter
(minimum bore)
nominal thread
size
(maximum
diameter)
Technical Information
TopThread™
TPI
nominal
thread size
minimum
thread diameter (mm)
NT-1 NT-1 NT-2
2** 5 4.500 114.3
2-1/2** 4-1/2 4.100 104.1
3** 4 3.665 93.1
4 3-1/2 3.250 82.6
5 3 2.800 71.1
6 2-1/2 2.333 59.3
8 2-1/4 2.125 54.0
10 2 1.900 48.3
12 1-3/4 1.667 42.4
14 1-5/8 1.554 39.5
16* 1-1/2 1.438 36.5
* Sixteen threads per inch and fi ner can be cut provided minor diameter
is 36,5mm or larger.
**NA-6 insert only.
TPI
nominal
thread size
minimum
thread diameter (mm)
6,00** M76 x 6.00 69,50
5,50** M73 x 5.50 67,05
5,00 M70 x 5.00 64,59
4,00 M64 x 4.00 59,67
3,00 M52 x 3.00 48,75
2,50 M48 x 2.50 45,29
2,00 M42 x 2.00 39,84
1,75 M40 x 1.75 38,11
1,50* M38 x 1.50 36,38
* Thread pitch of 1,5mm and less can be cut provided core thread diameter
is 35mm or larger.
** NT-4-insert only.
TPI
nominal
thread size
minimum
thread diameter (mm)
NT-1 NT-2 NT-1 NT-2
4,00 M48 x 4.00 – 43,67 –
3,00 M42 x 3.00 – 38,75 –
2,50 M39 x 2.50 M24 x 2,50 36,29 21,29
2,00 M33 x 2.00 M15 x 2,00 30,84 12,84
1,75 M32 x 1.75 M15 x 1,75 30,11 13,11
1,50 M32 x 1.50 M15 x 1,50 30,38 13,38
1,25 M29 x 1.29 M14 x 1,25 27,65 12,65
1,00* M27 x 1.00 M14 x 1,00 25,92 12,92
0,75 M22 x 0.75 M12 x 0,75 21,19 11,19
* Thread pitch of 1mm and less can be cut with an NT-2 insert provided the
core thread diameter is 25mm or larger (11mm or larger with NT-1).
internal threading limitations
NT-1, NT-2 60° V-threading inserts
internal threading limitations
NT-3 and NT-4 60° V-threading inserts
internal threading limitations
NA and NAS-2, -3, -4, and -6 Acme threading inserts
increase
clearance
Metric-sized 60° V-Threading Limits Acme Threading Limits
Additional secondary clearance can be ground on leading edge of insert
to provide suffi cient helical clearance for machining coarser threads and
multiple start threads. Modifi ed standard inserts may be furnished for
machining threads outside of the limits shown.
WID_Master16_Turning_Threading_F092_F093_Metric_REBRAND.indd 92 11/11/15 5:40 PM
F93
LViWID M 16 T i Th di F092 F093 M i REBRANDN b 11 20155 24PM
widia.com
NTC crest turning insert
for (P ) 2mm) and ner.
NTC crest turning insert
for (P * 3mm) and coarser.
The controlled root radius thread form (SAE8879C) is de ned for the external
thread only. To machine the corresponding internal thread, choose any insert
that will cut a uni ed class 2B thread, then bore the minor diameter to size.
Refer to SAE8879C and MIL-S-8879C and SAEAS8879D for the correct “J”
thread minor diameter values.
feed direction feed direction
Technical Information
TopThread™
60° V-Thread Crest Turning Application Data 60° V-Thread Crest Turning Application Data
“J” thread note for catalogue
60° V-Thread Application Data
NOTE: NTC inserts automatically control root to crest dimensions.
Therefore, in setting up threading operations with NTC inserts,
check the O.D. or I.D. at the thread crest for correct dimensions.
*Based on maximum insert radius size and class 2A and 2B thread specifi cations.
insert
catalogue number
nose radius
on insert
(mm)
thread radius per
MIL-S-8879A
(mm)
NJ-3014R/L12 0,317/0,342 0,317/0,381
NJK-3008R/L20 0,190/0,215 0,190/0,0228
radius
insert
description insert
D
(mm)
E
(mm)
recommended TPI* recommended TP*
external internal external internal
NT-1 1,90 1,11 – 24–12 – 1,00–2,00
NT-2 28,70 1,90 36–8 20–7 0,70–3,00 1,25–3,50
NT-2-K 28,70 1,90 36–8 20–7 0,70–3,00 1,25–3,50
NTF-2 15,75 1,01 44–14 24–12 0,60–1,75 1,00–2,00
NTK-2 15,75 1,01 44–14 24–12 0,60–1,75 1,00–2,00
NTP-2 28,70 1,90 36–8 20–7 0,70–3,0 1,25–3,50
NT-3 37,59 2,46 20–6 12–5 1,25–4,00 2,00–5,00
NT-3-K 37,59 2,46 20–6 12–5 1,25–4,00 2,00–5,00
NT-3-C 37,59 2,46 11–6 6 (only) 2,50–4,00 4,00 (only)
NT-3-CK 37,59 2,46 11–6 6 (only) 2,50–4,00 4,00 (only)
NTF-3 21,08 1,37 44–10 24–9 0,60–2,50 1,00–2,50
NTK-3 21,08 1,37 44–10 24–9 0,60–2,50 1,00–2,50
NTP-3 37,59 2,46 20–6 12–5 1,25–4,00 2,00–5,00
NT-4 49,78 3,22 20–4 12–4 1,25–6,25 2,00–6,25
NT-4-K 49,78 3,22 20–4 12–4 1,25–6,25 2,00–6,25
NT-4-C 49,78 3,22 11–4 1/2 6–4 1/2 2,50–5,50 4,00–5,50
NT-4-CK 49,78 3,22 11–4 1/2 6–4 1/2 2,50–5,50 4,00–5,50
NTF-4 21,08 1,37 44–10 24–9 0,60–2,50 1,00–2,50
NTK-4 21,08 1,37 44–10 24–9 0,60–2,50 1,00–2,50
NTP-4 49,78 3,22 20–4 12–4 1,25–6,25 2,00–6,25
feed direction
radius
feed direction
WID_Master16_Turning_Threading_F092_F093_Metric_REBRAND.indd 93 11/11/15 5:40 PM
F94
LViWID M 16 T i Th di F094 F095 M i REBRAND N b 11 2015 5 26 PM
widia.com
API Thread Forms • Insert Applications Chart for API Rotary Shouldered Connections
API Thread Forms
Product Thread Dimensions • Rotary Shouldered Connections (Inch)
V-.040 and V-.050 Product Thread Form Casing and Tubing Round Thread
(Height Dimensions)
thread element
10 TPI
p= .1000
8 TPI
p= .1250
H = .866p .08660 .10825
Hs = hn= .626p - .007 .05560 .07125
Srs = Sm= .120p + .002 .01400 .01700
Scs = Scn = .120p + .005 .01700 .02000
threadform
taper inch
per ft.
thread
height,
not
truncated
H
thread
height,
truncated
hn=hs
root
truncation
Sm=Srs
fm=frs
crest
truncation
fcn=fcs
width of fl at
root
radius
rm=rrs
radius
at thread
corners
r
pitch
p
crest
fcn=fcs
crest
fm=frs
V-.038R
V-.038R
V-.040
V-.050
V-.050
2
3
3
3
2
.216005
.215379
.172303
.215379
.216005
.121844
.121381
.117842
.147303
.147804
.038000
.038000
.020000
.025000
.025000
.056161
.055998
.034461
.043076
.043201
.065
.065
.040
.050
.050
—
—
—
—
—
.038
.038
.020
.025
.025
.015
.015
.015
.015
.015
.250
.250
.250
NOTE: All dimensions in inches.
thread
form
WIDIA
™
insert tool joint
application
minimum
box size*cresting non-cresting
V-.038R
2" TPF
4 TPI
NDC-4038R/L2
4-E/IR4API382 ND-3038R/L
2-3/8 API internal ush
2-7/8 API internal ush
3-1/2 API internal ush
4 API internal ush
4-1/2 API internal ush
5-1/2 API internal ush
6-5/8 API internal ush
4 API full hole
API #23, API #26, API #31,
API #35, API #38, API #40,
API #44, API #46, API #50
API #31
2-7/8 IF
V-.038R
3" TPF
4 TPI
NDC-4038R/L3
4-E/IR4API383 ND-3038R/L API #56
API #61
API #70
API #77
API #56
V-.050
2" TPF
4 TPI
NDC-4050R/L2
4-E/IRAPI502 ND-4050R/L 5-1/2 API full hole
6-5/8 API regular
6-5/8 API full hole 5-1/2 API full hole
V-.050
3" TPF
4 TPI
NDC-4050R/L3
4-E/IR4API503 ND-4050R/L 5-1/2 API regular
7-5/8 API regular
8-5/8 API regular 5-1/2 API regular
V-.040
3" TPF
5 TPI
NDC-3040R/L3
NDC-4040R/L3
4-E/IR5API403
ND-3040R/L
ND-4040R/L
2-3/8 API regular
2-7/8 API regular
3-1/2 API regular
4-1/2 API regular
3-1/2 API regular
*Minimum box size that can be threaded with a standard TopThread insert due to minimum bore equipment.
Technical Information
TopThread™
H
Sm
hn
fcn
axis of thread
p
box
fcn
r
pin
30º
60º
m
r
90º
fcs
30º
rrs
taper shown
exaggerated
fcs
hs
Srs
WID_Master16_Turning_Threading_F094_F095_Metric_REBRAND.indd 94 11/11/15 5:40 PM
F95
LViWID M 16 T i Th di F094 F095 M i REBRANDN b 11 20155 26PM
widia.com
Technical Information
TopThread™
internal threading limitations
NTB-2A Buttress threading inserts
American Buttress (7° Pressure Flank Leading) NTB-A Inserts • Push Type
internal threading limitations
NTB-3 and NTB-4A Buttress threading inserts
Reference Dimensions
NTB-A insert
Infeed Angle vs. Chip Load: 7° Pressure Flank Leading
Internal Threading Limitations
Threads per Inch vs. Maximum Root Radius Chart (Inch)
TPI 20161210865432-1/2 2 1-1/2 1-1/4 1
maximum root radius .0036 .0045 .0059 .0071 .0089 .0119 .0143 .0179 .0238 .0268 .0375 .0476 .0572 .0714
TPI nominal
thread size
minimum minor
diameter
(inch)
4* 2-1/2 2.200
5 2-1/4 2.010
6 2 1.800
8 1-3/4 1.600
10 1-5/8 1.505
12** 1-1/2 1.400
NOTE: Special Buttress forms are available upon request.
TPI nominal
thread size
minimum minor
diameter
(inch)
8 1-3/4 1.600
10 1-5/8 1.505
12 1-1/2 1.400
16 1-1/4 1.175
20 1-1/16 1.002
*NTB-4A insert only.
**Can cut 16 or 20 threads per inch provided minor diameter is 1.375" or larger.
insert D
(inch)
“A” ref.
(inch)
nose radius
(inch)
pitch based on
maximum radius
NTB-2A .133 .024 .002–.004 16–20 TPI
NTB-3A .171 .031 .005–.008 8–16 TPI
NTB-4A .218 .049 .008–.012 4–6 TPI
NOTE: For balanced chip load, 15° infeed angle is suggested.
“A” reference
nose radius
D maximum
depth with “A”
style insert
chuck
anti-clockwise
rotation
feed
7° pressure ank
of the thread being
the leading ank
NTB-2RA
NTB-3RA
NTB-4RA
external buttress
7° pressure ank leading
internal buttress
7° pressure ank leading
chuck
anti-clockwise
rotation
feed
NTB-2LA
NTB-3LA
NTB-4LA
7° pressure ank
of the thread being
the leading ank
7º
7º
NTB-2RA
NTB-3RA
NTB-4RA
seating
surface
in toolholder
insert
notch
seating
surface
in bar
insert
notch
NTB-2LA
NTB-3LA
NTB-4LA
external internal
Insert vs. Toolholder Orientation
.0039"
chip load
.010" infeed
.0052"
chip load
15º infeed angle
feed direction
.0012"
chip load
.010" infeed
.007" chip load
0º infeed angle
feed direction
WID_Master16_Turning_Threading_F094_F095_Metric_REBRAND.indd 95 11/11/15 5:40 PM
widia.com
F96
LViWID M 16 T i Th di F096 F097 M i REBRAND N b 11 2015 5 28 PM
internal threading limitations
NTB-3 and NTB-4B Buttress threading inserts
TPI nominal
thread size
minimum minor
diameter
(inch)
4* 2-7/8 2.575
5 2-3/4 2.510
6 2-3/8 2.175
8 2-1/8 1.975
10 1-7/8 1.755
12 1-5/8 1.525
16 1-1/2 1.407
20 1-7/16 1.378
internal threading limitations
NTB-2B Buttress threading inserts
TPI nominal
thread size
minimum minor
diameter
(inch)
8 1-3/4 1.600
10 1-5/8 1.505
12 1-1/2 1.400
16 1-1/4 1.175
20 1-1/16 1.002
insert
D
(inch)
“A” reference
(inch)
nose radius
(inch)
pitch based on
maximum radius
NTB-3B .171 .031 .005–.004 8–16 TPI
NOTE: For balanced chip load, a reverse 15° infeed angle is suggested.
Internal Buttress
45° clearance ank leading
chuck
anti-clockwise rotation
feed
45° clearance
ank of the
thread being
the leading ank
NTB-2LB
NTB-3LB
NTB-4LB
“A” reference
nose radius
maximum depth with
“B” style insert
D
Technical Information
TopThread™
*NTB-4B insert only.
American Buttress (45° Clearance Flank Leading): NTB-B Inserts • PULL-type
Reference Dimensions Infeed Angle vs. Chip Load: 45° Clearance Flank Leading
Internal Threading Limitations
External Buttress
45° clearance ank leading
chuck
anti anti-clockwise rotation
45° clearance ank of
the thread being the
leading ank
45°
NTB-2RB
NTB-3RB
NTB-4RB
feed
Insert vs. Toolholder Orientation
external internal
45° clearance ank leading
insert
notch
sealing
surface in
toolholder
NTB-2RB
NTB-3RB
NTB-4RB
sealing
surface
in bar
insert
notch
NTB-2LB
NTB-3LB
NTB-4LB
NTB-B insert
.010" infeed
.0052"
chip load .0039"
chip load
.007"
chip load .0012"
chip load
15° infeed angle 0° infeed angle
.010" infeed
WID_Master16_Turning_Threading_F096_F097_Metric_REBRAND.indd 96 11/11/15 5:40 PM
LViWID M 16 T i Th di F096 F097 M i REBRANDN b 11 20155 28PM
Laydown
Threading
System
The specially engineered WIDIA™ Laydown Threading System ensures the highest
accuracy and quality available to meet all modern production standards. With
an extensive range of inserts and toolholders available, the Laydown Threading
platform is ideal for all of your internal and external threading applications.
• Low-profi le design enables unrestricted chip fl ow.
• Precision-ground thread forms for industry-leading thread quality.
• Ideal choice for high-helix/multi-start threads and single-point threading
in small-diameter bores.
To learn more, contact your local Authorised Distributor or visit widia.com.
WID_Master16_Turning_Threading_F096_F097_Metric_REBRAND.indd 97 11/11/15 5:40 PM
F98
LViWID M 16 T i Th di F098 F099 M i REBRAND N b 11 2015 5 29 PM
widia.com
Required Information
Step 1 •
Determine Threading Method
Step 2 •
Select Insert
Step 3 •
Select the Grade and Speed
Step 4 •
Select Toolholder
NOTE: For this application, the standard
shim supplied should be replaced
with the recommended shim,
SM-YE3.
NOTE: Use insert with largest insert size available.
insert: 3ER10ISO
grade: TN6025
speed: 150 m/min
Steps for a Successful Threading Operation
From Part Drawing:
material: 316SS, 200 HB
thread form: 8UN
tolerance: class 2A
operation: external threading
pitch diameter: 50mm x 25mm deep
From Machine Setup Data:
tooling: 20mm x 20mm
spindle rotation: anti-clockwise
feed: toward chuck
Need to Know:
• Operation (external).
• Spindle rotation (CCW).
Anti-clockwise rotation.
• Feed direction (toward chuck).
• Right-hand toolholder.
• Right-hand insert (ER).
• Standard helix method.
Need to Know:
• Thread form (ISO R262 1mm pitch).
• Hand of insert (right hand — ER).
Need to Know:
• Workpiece material (316SS-200HB).
• Operation (external).
Chuck
Jaws CCW
rotation 8UN Class 2A
feed
70mm
25mm
50mm
Step 5 •
Select Shim
Choose the High-Performance Solution
High-Performance Selection
Options:
Options: Grade and Speed
Selection Guidelines
Need to Know:
• External or internal operation
(external).
• Pitch diameter to determine minimum
bore diameter (N/A).
• Type of tooling — toolholder, boring
bar (toolholder).
• Hand of tool (right hand).
• Insert size (16).
Need to Know:
• Thread form — TPI or pitch (8 TPI).
• Pitch diameter (50mm).
• Helix method (standard).
See Laydown Threading (LT) shim
selection chart.
Select SM-YE3 shim
Technical Information
External Laydown Threading
catalogue number insert size shim
AL203R 3 SM-YE3
threading
operation
stainless
steel
external
general purpose
and high performance
TN6025
50–360 m/min
catalogue number insert size TN6025
3ER10ISO 3•
WID_Master16_Turning_Threading_F098_F099_Metric_REBRAND.indd 98 11/11/15 5:40 PM
F99
LViWID M 16 T i Th di F098 F099 M i REBRANDN b 11 20155 29PM
widia.com
Required Information
From Part Drawing:
material: 4140 steel
thread form: ISO R262 2,5mm pitch
tolerance: ISO Metric Class 6G/6H
operation: internal threading
pitch diameter: 40mm x 35mm deep
From Machine Setup Data:
tooling: 20mm boring bar
spindle rotation: clockwise
feed: away from chuck
chuck
jaws
70mm
35mm ISO R262
2,5mm pitch
50mm deep
40mm
feed
CW rotation
Steps for a Successful Threading Operation
Step 1 •
Determine Threading Method
Need to Know:
• Operation (internal).
• Spindle rotation (CW).
Clockwise rotation.
• Feed direction (away from chuck).
• Left-hand toolholder.
• Left-hand insert (NL).
• Reverse helix method.
Step 2 •
Select Insert
NOTE: Use insert with largest possible insert size to go into the bore.
insert: 3IL25ISO
grade: TN6025
speed: 130 m/min
Need to Know:
• Thread form (ISO Metric Class 6G/6H).
• Hand of insert (left hand — NL).
Choose the High-Performance Solution
High-Performance Selection
Step 3 •
Select the Grade and Speed
Need to Know:
• Workpiece material (4010 steel).
• Operation (internal).
Options: Grade and Speed
Selection Guidelines
Step 4 •
Select Toolholder
Options:
Need to Know:
• External or internal operation
(internal).
• Pitch diameter to determine minimum
bore diameter for internal operations
(40mm).
• Type of tooling — toolholder, boring
bar (boring bar).
• Hand of tool (left hand).
• Insert size (16).
Need to Know:
• Thread form — TPI or pitch
(2,5mm pitch).
• Pitch diameter (40mm).
• Helix method (reverse).
See Laydown Threading (LT)
shim selection chart.
Select SM-YE3
Step 5 •
Select Shim
NOTE: For this application, the
standard shim supplied
should be replaced with
the recommended shim,
SM-YE3.
Technical Information
Internal Laydown Threading
threading
operation steel
internal
general purpose
and high performance
TN6025
40–200 m/min
catalogue number insert size shim
AVR32D3R 3 SM-YE3
catalogue number insert size TN6025
3IL25ISO 3•
WID_Master16_Turning_Threading_F098_F099_Metric_REBRAND.indd 99 11/11/15 5:40 PM
widia.com
F100
LViWID M 16 T i Th di F100 F101 M i REBRAND O b 15 2015 11 03 AM
Laydown Threading Shim Selection Guidelines
It is essential to select the correct shim to ensure thread quality and
maximum tool life. These parameters are needed:
• Pitch
• Pitch diameter
• Number of starts
• Feed direction
To calculate the lead angle of a given thread, use this formula:
ß = thread lead angle
De = effective pitch diameter of thread wear
P = 1/TPI
TPI = threads per inch
S = number of starts
single-start, lead = pitch
multiple-start, lead = pitch (x) number of starts
All toolholders are designed with an inclination
angle = 1.5°. When turning standard threads with
a lead angle of 1–2°, this guarantees adequate
clearance at the anks of the insert’s thread
tooth. The thread lead angle and the required
inclination angle of the insert are given by ß.
Cutting edge height is constant at every shim
and insert combination. All toolholders are
supplied with 1-1/2° lead angle.
Technical Information
Laydown Threading
NOTE: When considering method of thread cutting, the part’s shape and stability
and the fl ow of chips are determining factors in your decision.
Laydown Selection Chart
pitch (mm)
feed direction toward the chuck
(standard helix)
RH thread/RH tooling LH thread/LH tooling
feed direction away from the chuck
(reverse helix)
LH thread/RH tooling RH thread/LH tooling
pitch (mm)
10 —
9 —
8 —
7 —
6 —
5 —
4 —
3 —
2 —
1 —
0 —
1 —
2 —
3 —
4 —
5 —
6 —
7 —
8 —
9 —
10 —
NOTE: For multi-start threads, use the lead value instead of the pitch.
Diagram of Thread Lead Angles
ß = Arctan
P•S
/ De
WID_Master16_Turning_Threading_F100_F101_Metric_REBRAND.indd 100 10/30/15 3:39 PM
widia.com F101
LViWID M 16 T i Th di F100 F101 M i REBRANDO b 15 201511 03AM
Technical Information
Laydown Threading
insert size
toolholder shim ordering code (mm)
external internal standard
3 (9,52) RH LH SM–YE3–3P SM–YE3–2P SM–YE3–1P SM–YE3 SM–YE3–1N SM–YE3–1.5N SM–YE3–2N SM–YE3–3N
3 (9,52) LH RH SM–YI3–3P SM–YI3–2P SM–YI3–1P SM–YI3 SM–YI3–1N SM–YI3–1.5N SM–YI3–2N SM–YI3–3N
4 (12,7) RH LH SM–YE4–3P SM–YE4–2P SM–YE4–1P SM–YE4 SM–YE4–1N SM–YE4–1.5N SM–YE4–2N SM–YE4–3N
4 (12,7) LH RH SM–YI4–3P SM–YI4–2P SM–YI4–1P SM–YI4 SM–YI4–1N SM–YI4–1.5N SM–YI4–2N SM–YI4–3N
TPI pitch (mm) pitch diameter (mm)
72 – – – – 3,1–8 8–21,4 >21,4 21,4–8 8–3,1
– 0,35 – – – 3,0–8 8–21,3 >21,3 21,3–8 3–8
64 – – – – 3,4–9 9–24,1 >24,1 24,1–9 9–3,4
– 0,40 – – – 3,5–9,1 9,1–24,3 >24,3 24,3–9,1 9,1–3,5
56 0,45 – – – 3,9–10,3 10,3–27,6 >27,6 27,6–10,3 10,3–3,9
– 0,50 – – 2,8–4,3 4,3–11,4 11,4–30,4 >30,4 30,4–11,4 11,4–4,3
48 – – – 3–4,6 4,6–12,1 12,1–32,2 >32,2 32,2–12,1 12,1–4,6
44 – – – 3,3–5 5–13,2 13,2–35,1 >35,1 35,1–13,2 13,2–5
– 0,60 – 2,6–3,4 3,4–5,2 5,2–13,7 13,7–36,5 >36,5 36,5–13,7 13,7–5,2
40 – – 2,8–3,6 3,6–5,5 5,5–14,5 14,5–38,6 >38,6 38,6–14,5 14,5–5,5
– 0,70 – 3,0–4 4–6,1 6,1–16 16–42,6 >42,6 42,6–16 16–6,1
36 – – 3,1–4 4–6,1 6,1–16,1 16,1–42,9 >42,9 42,9–16,1 16,1–6,1
– 0,75 2,8–3,2 3,3–4,3 4,3–6,5 6,5–17,1 17,1–45,6 >45,6 45,6–17,1 17,1–6,5
32 – 3–3,4 3,4–4,5 4,5–6,9 6,9–18,1 18,1–48,3 >48,3 48,3–18,1 18,1–6,9
– 0,80 3–3,5 3,5–4,6 4,6–6,9 6,9–18,2 18,2–48,6 >48,6 48,6–18,2 18,2–6,9
28 – 3,4–3,9 3,9–5,2 5,2–7,9 7,9–20,7 20,7–55,1 >55,1 55,1–20,7 20,7–7,9
27 – 3,6–4,1 4,1–5,4 5,4–8,2 8,2–21,4 21,4–57,2 >57,2 57,2–21,4 21,4–8,2
– 1,00 3,8–4,3 4,3–5,7 5,7–8,7 8,7–22,8 22,8–60,8 >60,8 60,8–22,8 22,8–8,7
24 – 4–4,6 4,6–6 6–9,2 9,2–24,1 24,1–64,3 >64,3 64,3–24,1 24,1–9,2
– 1,25 4,7–5,4 5,4–7,1 7,1–10,8 10,9–28,5 28,5–76 >76,0 76–28,5 28,5–10,8
20 – 4,8–5,5 5,5–7,2 7,2–11 11–28,9 29–77,2 >77,2 77,2–28,9 29–11
18 – 5,3–6,1 6,1–8 8–12,2 12,2–32,2 32,2–85,8 >85,8 85,8–32,2 32,2–12,2
– 1,50 5,7–6,5 6,5–8,5 8,5–13 13–34,2 34,2–91,2 >91,2 91,2–34,2 34,2–13
16 – 6–6,9 6,9–9 9–13,8 13,8–36,2 36,2–96,5 >96,5 96,5–36,2 36,2–13,8
– 1,75 6,6–7,96 7,6–10 10–15,2 15,2–39,9 39,9–106,4 >106,4 106,4–39,9 39,9–15,2
14 – 6,9–7,9 7,9–10,3 10,3–15,7 15,7–41,4 41,4–110,3 >110,3 110,3–41,4 41,4–15,7
13 – 7,4–8,5 8,5–11,1 11,1–17 17–44,5 44,5–118,8 >118,8 118,8–44,5 44,5–17
– 2,00 7,6–8,7 8,7–11,4 11,4–17,4 17,4–45,6 45,6–121,6 >121,6 121,6–45,6 45,6–17,4
12 – 8–9,2 9,2–12 12,1–18,4 18,4–48,2 48,3–128,7 >128,7 128,7–48,2 48,2–18,4
11.5 – 8,4–9,6 9,6–12,6 12,6–19,2 19,2–50,3 50,3–134,3 >134,3 134,3–50,3 50,3–19,2
11 – 8,8–10 10–13,1 13,1–20 20–52,6 52,6–140,4 >140,4 140,4–52,6 52,6–20
– 2,50 9,5–10,8 10,8–14,2 14,2–21,7 21,7–57 57–152 >152,0 152–57 57–21,7
10 – 9,6–11 11–14,5 14,5–22 22–57,9 57,9–154,4 >154,4 154,4–57,9 57,9–22
9 – 10,7–12,2 12,2–16,1 16,1–24,5 24,5–64,3 64,3–171,6 >171,6 171,6–64,3 64,3–24,5
– 3,00 11,4–13 13–17,1 17,1–26 26–68,4 68,4–182,4 >182,4 182,4–68,4 68,4–26
8 – 12–13,8 13,8–18,1 18,1–27,6 27,6–72,4 72,4–193 >193,0 193–72,4 72,4–27,6
– 3,50 13,3–15,2 15,2–19,9 19,9–30,4 30,4–79,8 79,8–212,8 >212,8 212,8–79,8 79,8–30,4
7 – 13,8–15,7 15,7–20,7 20,7–31,5 31,5–82,7 82,7–220,6 >220,6 220,6–82,7 82,7–31,5
– 4,00 15,2–17,3 17,3–22,8 22,8–34,7 34,7–91,2 91,2–243,2 >243,2 243,2–91,2 91,2–34,7
6 – 16–18,3 18,3–24,1 24,1–36,7 36,7–96,5 96,5–257,4 >257,4 257,4–96,5 96,5–36,7
– 5,00 19–21,7 21,7–28,5 28,5–43,4 43,4–114 114–304 >304,0 304–114 114–43,4
5 – 19,3–22 22–28,9 28,9–44,1 44,1–115,8 115,8–308,8 >308,8 308,8–115,8 115,8–44,1
4,5 – 21,4–24,5 24,5–32,1 32,1–49 49–128,7 128,7–343,1 >343,1 343,1–128,7 128,7–49
– 6,00 22,7–26 26–34,2 34,2–52,1 52,1–136,8 136,8–364,8 >364,8 364,8–136,8 136,8–52,1
4 – 24,1–27,5 27,5–36,2 36,2–55,1 55,1–144,8 144,8–386 >386 386–144,8 144,8–55,1
inclination angle 4.5 3.5 2.5 1.5 0.5 0.0 -0.5 -1.5
standard helix
(feed toward the chuck)
reverse helix (feed away
from the chuck)
1. Select TPI or pitch from the left-hand columns.
2. Follow row to specifi ed pitch diameter and the correct feed direction.
3. Follow the column to the top for the required shim based on the toolholder and insert size.
Laydown Threading Shim Selection Table • Metric
standard helix method:
Used when RH thread is cut with RH
tool or LH thread with LH tool.
reverse helix method:
Used when RH thread is
cut with LH tool or when LH
thread is cut with RH tool.
WID_Master16_Turning_Threading_F100_F101_Metric_REBRAND.indd 101 10/30/15 3:39 PM
LViWID M 16 I d bl Milli S i I G000 G001 M i REBRANDO b 13 20153 49PM
WID_Master16_IndexableMilling_SectionIntro_G000_G001_Metric_REBRAND.indd 1 10/29/15 1:48 PM
widia.com G1
LViWID M 16 I d bl Milli S i I G000 G001 M i REBRANDO b 1320153 49PM
Indexable Milling
Indexable Milling Introduction ..............................................................................................................................G2–G19
Face Mills ...............................................................................................................................................................H1–H74
Chamfer Mills ............................................................................................................................................................ I1–I10
90° Shoulder Mills ................................................................................................................................................... J1–J51
Helical Mills ..............................................................................................................................................................K1–K9
Slotting Mills ...........................................................................................................................................................L1–L33
Copy Mills ............................................................................................................................................................M1–M130
WID_Master16_IndexableMilling_SectionIntro_G000_G001_Metric_REBRAND.indd 1 10/29/15 1:48 PM
G2
LViWID M 16 I d bl Milli S i I G002 G003 M i REBRANDN b 20 20157 04AM
widia.com
• WP40PM™ — New best-in-class Victory milling
grade for machining steel materials in ISO material
group P40 in rough milling applications.
• WK15CM™ — New milling grade for cast irons for
higher tool life and increased productivity.
• WS30PM™ — A new high-performance milling
grade for machining titanium and stainless steels.
Victory™ Milling Grades
• Step down capabilities.
• Effective internal coolant supply for screw-on,
end mill, and shell mill cutters.
• The max ramp angle for VSM11 is 10°.
VSM11™
Our latest metalcutting innovations are designed to deliver higher productivity, longer tool life,
and increased application versatility.
For more information about the latest products and services from WIDIA™, please contact your
WIDIA Representative or Authorised WIDIA Distributor, or visit widia.com.
NEW PRODUCTS
WID_Master16_IndexableMilling_SectionIntro_G002_G003_Metric_REBRAND.indd 2 11/20/15 7:04 AM
G3
LViWID M 16 I d bl Milli S i I G002 G003 M i REBRANDN b 2020157 04AM
widia.com
VSM17™
VSM490™
SuperFeed™
• Depth-of-cut capabilities up to 16,3mm.
• Step down capabilities.
• Effective internal coolant supply for screw-on,
end mill, and shell mill cutters.
• Four cutting edges on a double-sided strong insert.
• Lower cutting forces; high-positive geometry.
• Excellent wall and surface finish capabilities.
• When using multiple steps, this is a “stepless” solution.
• Protective cutter body.
• Increased flexibility with five PCD cartridge options.
• User-friendly axial adjustment.
• Reconditioning options reduce overall cost.
WID_Master16_IndexableMilling_SectionIntro_G002_G003_Metric_REBRAND.indd 3 11/20/15 7:04 AM
G4
LViWID M 16 I d bl Milli S i I G004 G005 M i REBRANDN b 12 20158 07AM
widia.com
The Most Advanced Milling Solutions in the Industry
Indexable Milling
Choosing the Correct Cutter
For unsurpassed quality, value, and performance, you can trust WIDIA
™
to provide the
most comprehensive line of reliable metalcutting tools. Whatever your indexable milling
product requirements, be assured that you will nd the appropriate solution in this
all-inclusive, easy-to-use guide.
For every milling application, workpiece, or equipment need, we offer the best tools on
the market, designed to reduce your machining time, provide superior surface nishes,
and outperform the competition.
1. Choose your application:
• Face Mills
• Shoulder Mills
• Helical Mills
• Slotting Mills
• Copy Mills
• Chamfer Mills
2. Identify material to be
machined:
Each tool has a material
grid marked with a letter
indicating thematerials
that can be machined.
3. Select tool based on
maximum depth of cut
and diameter required:
Information is given in this area
to provide speci c detail as a
quick reference.
Location of introduction
detail, tool bodies, inserts,
and cutting data
Face Mills
Tool name
Product photo
Informational icons
(Connection type
and possible
operations)
PSteel
MStainless Steel
KCast Iron
NNon-Ferrous
SHigh-Temp Alloys
HHardened Materials
Victory™ M1200 45°
Max depth of cut: 4,5mm
Lead angle: 45°
Indexes per insert: 12
Diameter: 40–315mm
Pages: H30–H37
P
M
K
N
S
H
You can also use our NOVO app to
guide you to the correct choice!
For more information, please visit
widia.com/novo.
WID_Master16_IndexableMilling_SectionIntro_G004_G005_Metric_REBRAND.indd 4 11/12/15 8:56 AM
G5
LViWID M 16 I d bl Milli S i I G004 G005 M i REBRANDN b 1220158 07AM
widia.com
Selecting Tool Body, Insert, and Cutting Data
4. Choose the tool body:
Choose diameter (D1) and pitch (Z)
of tool body.
NOTE: Make sure you select the
correct shank style for your
toolholder. For toolholders,
visit widia.com.
Indexable Milling
Determining Cutting Data
A Determine light machining,
general purpose, or heavy
machining according to
workpiece material. See the
Material Overview at the end
of the catalogue for material
descriptions.
B Select the grade given in the
insert selection guide. Use the
six digit order number to easily
place your order.
5. Choose the inserts with the
WIDIA™ insert selection guide:
6. Determine cutting data —
with the WIDIA Recommended
Speeds and Feeds tables:
A Choose the recommended
speed value according to the
workpiece material and grade.
B Choose the recommended
starting feed rate according to
the insert geometry and % of
radial engagement ae.
Starting values are given in bold.
Recommended Starting Speeds [SFM]
n Insert Selection Guide
Material
Group
Light
Machining
General
Purpose
Heavy
Machining
Geometry Grade Geometry Grade Geometry Grade
P1–P2
.E..LD WP40PM
.S..GD WP40PM
.S..HD WP40PM
P3–P4
.E..LD WP25PM
.S..GD WP35CM
.S..HD WP35CM
P5–P6
.E..LD WP25PM
.S..GD WP35CM
.S..HD WP35CM
5A
rst choice
alternate choice
n HNGJ-GD
catalogue number
cutting
edges D L10 S BS Rεhm
TN6520
TN6525
TN6540
TN7535
WK15CM
WP25PM
WS30PM
WP35CM
WP40PM
HNGJ0905ANSNGD 12 16 8,58 5,56 1,80 1,20 0,10
3119541
3614650
3037596
3093721
5427370
—
5528974
5895349
5895350
HNGJ-GD HNPJ-HD HNGJ-HD
P
M
K
N
S
H
5B
Material
Group WP25PM WP35CM WS30PM WP40PM TN6501 THM-U
P
1
395
340
325 545
475
445 –
–
– 355
310
295 –
–
––
–
–
2
330
290
240 335
305
275 –
–
– 300
260
215 –
–
––
–
–
3
305
260
210 305
275
245 –
–
– 275
235
190 –
–
––
–
–
4
270
220
180 230
210
190 –
–
– 245
205
160 –
–
––
–
–
5
220
205
180 310
275
250 –
–
– 205
185
160 –
–
––
–
–
6
200
150
120 190
160
130 –
–
– 180
140
110 –
–
––
–
–
M
1
245
215
200 245
220
185 270
240
220 235
205
185 –
–
––
–
–
2
220
190
155 220
190
170 245
215
175 210
180
150 –
–
––
–
–
3
170
145
115 175
155
140 185
160
125 155
140
110 –
–
––
–
–
K
1
275
245
220 355
320
290 –
–
––
–
––
–
––
–
–
2
215
190
180 280
250
230 –
–
––
–
––
–
––
–
–
3
180
160
145 235
210
190 –
–
––
–
––
–
––
–
–
n Recommended Starting Feeds [mm]
NOTE: Use “Light Machining” value as starting feed rate.
Light
Machining
General
Purpose
Heavy
Machining
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
.F..LDJ 0,17
0,32
0,65 0,13
0,23
0,47 0,09
0,17
0,35 0,08
0,15
0,31 0,08
0,14
0,28 .F..LDJ
.E..LD 0,17
0,50
1,00 0,13
0,36
0,72 0,09
0,27
0,54 0,08
0,23
0,47 0,08
0,21
0,43 .E..LD
.S..GD 0,33
0,84
1,35 0,24
0,60
0,97 0,18
0,45
0,72 0,16
0,39
0,63 0,14
0,36
0,57 .S..GD
.S..HD 0,33
0,84
1,35 0,24
0,60
0,97 0,18
0,45
0,72 0,16
0,39
0,63 0,14
0,36
0,57 .S..HD
6A
6A
6A
6B
6B
6B
WID_Master16_IndexableMilling_SectionIntro_G004_G005_Metric_REBRAND.indd 5 11/12/15 8:56 AM
G6
LViWID M 16 I d bl Milli S i I G006 G007 M i REBRANDO b 19 20152 01PM
widia.com
Indexable Milling
Application Guide • Face Mills
Face Mills
Victory
™
M1200 Mini HD 59°
Max depth of cut: 4,7mm
Lead angle: 59°
Indexes per insert: 12
Diameter: 40–125mm
Pages: H20–H23
P
M
K
N
S
P
M
K
N
S
H
Victory
™
M1200 Mini 45°
Max depth of cut: 3,5mm
Lead angle: 45°
Indexes per insert: 12
Diameter: 25–120mm
Pages: H12–H19
Victory
™
M1200 45°
Max depth of cut: 4,5mm
Lead angle: 45°
Indexes per insert: 12
Diameter: 40–315mm
Pages: H30–H37
P
M
K
N
S
H
(continued)
P
M
K
N
S
Victory
™
M1200 HF 14.5°
Max depth of cut: 2,2mm
Lead angle: 14.5°
Indexes per insert: 12
Diameter: 50–160mm
Pages: H26–H29
Pages: H5–H11
Victory
™
M1200 Mini HF 15°
Max depth of cut: 1,7mm
Lead angle: 15°
Indexes per insert: 12
Diameter: 25–80mm
P
M
K
N
S
Victory
™
M1200 HD 59°
Max depth of cut: 6mm
Lead angle: 59°
Indexes per insert: 12
Diameter: 50–160mm
Pages: H38–H41
P
M
K
N
S
WID_Master16_IndexableMilling_SectionIntro_G006_G007_Metric_REBRAND.indd 6 10/29/15 1:55 PM
G7
LViWID M 16 I d bl Milli S i I G006 G007 M i REBRANDO b 1920152 01PM
widia.com
Face Mills
Indexable Milling
Application Guide • Face Mills
P
M
K
N
S
H
M4000
Cartridge Milling System
All front line insert styles
available.
Diameter: 125–315mm
(continued)
Pages: H72–H74
M660 SN1205..
Max depth of cut: 6,4mm
Lead angle: 45°
Indexes per insert: 4
Diameter: 20–160mm
Pages: H52–H57
P
M
K
N
S
H
P
M
K
M660 SN1505..
Max depth of cut: 8,4mm
Lead angle: 45°
Indexes per insert: 4
Diameter: 100mm
Pages: H58–H60
M640
Max depth of cut: 4,8mm
Lead angle: 58°
Indexes per insert: 6
Diameter: 32–125mm
Pages: H44–H49
P
M
K
N
S
H
N
SuperFeed
™
Max depth of cut: 6,35mm
(can be less depending
on the cartridge)
Lead angle: 90°
Indexes per insert:
1 edge per PCD cartridge
Diameter: Standard Platform
63–200mm
Pages: H64–H68
WID_Master16_IndexableMilling_SectionIntro_G006_G007_Metric_REBRAND.indd 7 10/29/15 1:55 PM
G8
LViWID M 16 I d bl Milli S i I G008 G009 M i REBRANDO b 13 20153 50PM
widia.com
Indexable Milling
Application Guide • Chamfer Mills
Chamfer Mills M25
™
SD0903..
Max depth of cut: 6,4mm
Lead angle: 45°
Indexes per insert: 4
Diameter: 25–40mm
Pages: I4–I6, I8, I10
P
M
K
N
S
H
M25 SP1204..
Max depth of cut: 8,3mm
Lead angle: 45°
Indexes per insert: 4
Diameter: 50–63mm
Pages: I7, I9–I10
P
M
K
N
S
H
WID_Master16_IndexableMilling_SectionIntro_G008_G009_Metric_REBRAND.indd 8 10/29/15 1:55 PM
G9
LViWID M 16 I d bl Milli S i I G008 G009 M i REBRANDO b 1320153 50PM
widia.com
Indexable Milling
Application Guide • 90° Shoulder Mills
90° Shoulder
Mills
VSM17
™
Max depth of cut: 16,33mm
Lead angle: 90°
Indexes per insert: 2
Diameter: 25–160mm
VSM490
™
-15
M690 SD1506..
Max depth of cut: 15mm
Max depth of cut: 12mm
Lead angle: 90°
Indexes per insert: 4
Diameter: 25–160mm
Lead angle: 90°
Indexes per insert: 4
Diameter: 50–125mm
P
M
K
S
Pages: J32–J40
Pages: J48–J51
P
M
K
N
S
Pages: J20–J29
P
M
K
S
H
P
M
K
N
S
H
VSM11
™
Max depth of cut: 11,7mm
Lead angle: 90°
Indexes per insert: 2
Diameter: 16–125mm
Pages: J4–J16
P
M
K
S
H
M690 SD1204..
Max depth of cut: 10mm
Lead angle: 90°
Indexes per insert: 4
Diameter: 50–160mm
Pages: J44–J47
WID_Master16_IndexableMilling_SectionIntro_G008_G009_Metric_REBRAND.indd 9 10/29/15 1:55 PM
G10
LViWID M 16 I d bl Milli S i I G010 G011 M i REBRANDO b 13 20153 51PM
widia.com
Helical Mills
Slotting Mills
M390 SD1204...
Max depth of cut: 17mm
Lead angle: 90°
Indexes per insert: 4
Diameter: 50–80mm
Pages: K4–K9
Pages: L10–L14
Pages: L24–L30,
L32–L33
Pages: L18–L21
Indexable Milling
Application Guide • Helical Mills • Slotting Mills
P
M
K
S
H
P
M
K
M16
M95
M94
M900
™
Slot Width Range:
11–21,9mm
Slot Width Range:
4–10mm
Slot Width Range:
1,93–5,23mm
Slot Width Range:
12–22mm
Indexes per insert: 2
Diameter: 25–50mm
Indexes per insert: 4
Diameter: 100–200mm
Indexes per insert: 3
Diameter: 25–80mm
Indexes per insert: 2
Diameter: 100–315mm
Pages: L4–L7
P
M
K
P
M
K
P
M
K
S
WID_Master16_IndexableMilling_SectionIntro_G010_G011_Metric_REBRAND.indd 10 10/29/15 1:55 PM
G11
LViWID M 16 I d bl Milli S i I G010 G011 M i REBRANDO b 1320153 51PM
widia.com
M370
™
M170
™
M200
™
M100
™
Max depth of cut: up to 2mm
Max depth of cut: 8mm
Max depth of cut: up to 5mm
Max depth of cut: 6mm
Indexes per insert: 6
Diameter: 25–125mm
Diameter: 12–125mm
Indexes per insert: up to 12
Diameter: 25–125mm
Diameter: 24–125mm
Pages: M4–M16
Pages: M42–M70
Pages: M102–M117
Pages: M20–M39
Pages: M74–M99
Pages: M118–M123
M270
™
Ball Nose
M270 High Feed
M270 Toroidal
Max depth of cut: 5–16mm
Max depth of cut:
0,6–1,1mm
Max depth of cut: 0,3–4mm
Diameter: 10–32mm
Diameter: 10–20mm
Diameter: 10–20mm
Pages: M124–M130
Copy Mills
Indexable Milling
Application Guide • Copy Mills
P
M
K
S
H
P
M
K
S
H
P
M
K
S
H
P
M
K
S
H
P
M
K
S
H
P
M
K
S
H
P
M
K
S
H
WID_Master16_IndexableMilling_SectionIntro_G010_G011_Metric_REBRAND.indd 11 10/29/15 1:55 PM
G12
LViWID M 16 I d bl Milli S i I G012 G013 M i REBRANDO b 13 20153 51PM
widia.com
Face Mills • Victory™ M1200 Mini Series
Inserts
n HNPJ-GD
catalogue number
cutting
edges D L10 S BS Rεhm
TN6510
TN6520
TN6525
TN6540
TN7535
WK15CM
WP25PM
WP35CM
WS30PM
WP40PM
HNPJ0704ANSNGD 12 13 6,80 4,45 1,27 1,20 0,10
3954432
3954473
–
3954474
3954475
5427374
5895293
5895294
5528976
5550906
rst choice
alternate choice
n HNPJ-HD
HNPJ-GD HNPJ-HD
Face Mills
P
M
K
N
S
H
n
n
WIDIA™ Milling Inserts
Catalogue Numbering System
indexable inserts with corner radii insert thickness
indexable inserts with
facets/wipers
Each character in our catalogue number signi es a speci c trait of
that product. Use the following key columns and corresponding
images to easily identify which attributes apply.
How Do Catalogue Numbers Work?
Special
Design
*See table above for tolerances according to insert size and class.
**WIDIA standard only.
iC (+/–) M (+/–)T (
+/–) iC (+/–) M (+/–)T (
+/–)
A0,025 0,005 0,025 J0,05–0,15* 0,005 0,025
B0,025 0,005 0,013 K0,05–0,15* 0,013 0,025
C0,025 0,013 0,025 L0,05–0,15* 0,025 0,025
D0,025 0,013 0,013 M0,05–0,15* 0,08–0,20* 0,013
E0,025 0,025 0,025 N0,05–0,15* 0,08–0,20* 0,025
F0,013 0,005 0,025 P** 0,038 0,038 0,038
G0,025 0,025 0,013 U0,08–0,25* 0,13–0,30* 0,013
H0,013 0,013 0,025
iC
tolerances on “iC” tolerances on “M”
classes J, K, L, M, N (+/–) class U (+/–) classes M & N (+/–) class U (+/–)
4,76–10,00 0,051 0,076 0,076 0,127
11,11–14,29 0,076 0,127 0,127 0,203
15,00–20,64 0,102 0,178 0,152 0,279
22,00–31,16 0,127 0,254 0,178 0,381
31,75–35,00 0,152 0,254 0,2 0,381
HNP J
Insert Shape Insert Clearance
Angle
Tolerance
Class Geometry and Clamping Type
A
B
C
E
H
L
O
R
S
T
W
X
A
B
C
D
E
F
G
N
P
symbol hole shape of hole chipbreaker
shape of
insert’s section
N
without
without
R single-sided
F double-sided
A
with cylindrical hole
without
M single-sided
G double-sided
Wwith partly cylindrical
hole, 40–60º
countersink
without
T single-sided
Qwith partly cylindrical
hole, 40–60º
double countersink
without
U double-sided
Bwith partly cylindrical
hole, 70–90º
countersink
without
H single-sided
Cwith partly cylindrical
hole, 70–90º
double countersink
without
J double-sided
X special design
HNPJ0704ANSNGD
WID_Master16_IndexableMilling_SectionIntro_G012_G013_Metric_REBRAND.indd 12 10/29/15 1:55 PM
G13
LViWID M 16 I d bl Milli S i I G012 G013 M i REBRANDO b 1320153 51PM
widia.com
Face Mills • Victory™ M1200 Mini Series
Inserts
n HNPJ-GD
catalogue number
cutting
edges D L10 S BS Rεhm
TN6510
TN6520
TN6525
TN6540
TN7535
WK15CM
WP25PM
WP35CM
WS30PM
WP40PM
HNPJ0704ANSNGD 12 13 6,80 4,45 1,27 1,20 0,10
3954432
3954473
–
3954474
3954475
5427374
5895293
5895294
5528976
5550906
rst choice
alternate choice
n HNPJ-HD
HNPJ-GD HNPJ-HD
Face Mills
P
M
K
N
S
H
n
n
n
WIDIA™ Milling Inserts
Catalogue Numbering System
By referencing this easy-to-use guide,
you can identify the correct product to
meet your needs.
inscribed circle “iC” versus
cutting edge length “L”
For shapes A, L, and X, see position #1;
use length of leading cutting edge.
direction of cutter
rotation
leading or
major cutting
edge
facet or
wiper
edge
assumed
direction of
feed motion
07 04 AN S N GD
Size
(Cutting Edge Length)
Insert Thickness Corner
Confi guration
Cutting Edge
Form
Insert Hand Edge
Geometry
symbol thickness
T1 1,98
02 2,38
03 3,18
T3 3,97
04 4,76
05 5,56
06 6,35
07 7,94
iC
“L” for shapes
STROCHE
6,00 – – 06 – – – –
6,35 06 11 06 02 06 03 06
8,00 – – 08 – – – –
9,52 09 16 09 04 09 05 09
10,00 – – 10 – – – –
12,00 – – 12 – – – –
12,70 12 22 12 05 12 07 13
15,88 15 27 15 06 16 09 16
16,00 – – 16 – – – –
19,05 19 33 19 07 19 11 19
20,00 – – 20 – – – –
25,00 – – 25 – – – –
25,40 25 4
radius
M0
MO round insert
If letter is replaced
by number(s), refer
to table for radius “r.”
wiper edge
clearance P
01 0,1mm
02
0,2mm
04
0,4mm A
3º
05 0,5mm B 5º
08
0,8mm
C7º
10
1,0mm
D15º
12 1,2mm lead angle K E20º
15
1,5mm A
45ºF25º
16 1,6mm D 60ºG30º
24
2,4mm E
75ºN0º
32 3,2mm P 90ºP11º
HNPJ0704ANSNGD
Fsharp
Ehoned
TT-land
Shoned +
T-land
WID_Master16_IndexableMilling_SectionIntro_G012_G013_Metric_REBRAND.indd 13 10/29/15 1:55 PM
G14
LViWID M 16 I d bl Milli S i I G014 G015 M i REBRANDN b 12 20158 11AM
widia.com
WIDIA™ Milling Tool Bodies
Catalogue Numbering System
n Shell Mills
order number catalogue number D1 D1 max D D6 L L2 Ap1 max Z max RPM
coolant
supply kg
3957995 M1200D040Z04HN07 40 48,7 22 38 40 40 3,5 4 15800 Yes 0,26
3957996 M1200D040Z05HN07 40 48,7 22 38 40 40 3,5 5 15800 Yes 0,26
3957997 M1200D050Z04HN07 50 58
,
722384040 3
,
5 4 12700 Yes 0
,
35
Face Mills
• Twelve cutting edges.
• First choice for low depth-of-cut face milling.
• Maximum number of teeth per diameter.
M1200 D 100 Z 03 C
Series Cutting Diameter Number of Flutes Shank Form
Z = Number of
effective utes
C= Cylindrical
W= Weldon
®
M= Modular
S= Shell Mill
Each character in our catalogue number signi es a speci c trait of
that product. Use the following key columns and corresponding
images to easily identify which attributes apply.
M1200D100Z03C100HN07L800
How Do Catalogue Numbers Work?
Indexable Milling Tool Bodies
WID_Master16_IndexableMilling_SectionIntro_G014_G015_Metric_REBRAND.indd 14 11/12/15 8:56 AM
G15
LViWID M 16 I d bl Milli S i I G014 G015 M i REBRANDN b 1220158 11AM
widia.com
WIDIA™ Milling Tool Bodies
Catalogue Numbering System
n Shell Mills
order number catalogue number D1 D1 max D D6 L L2 Ap1 max Z max RPM
coolant
supply kg
3957995 M1200D040Z04HN07 40 48,7 22 38 40 40 3,5 4 15800 Yes 0,26
3957996 M1200D040Z05HN07 40 48,7 22 38 40 40 3,5 5 15800 Yes 0,26
3957997 M1200D050Z04HN07 50 58
,
722384040 3
,
5 4 12700 Yes 0
,
35
Face Mills
• Twelve cutting edges.
• First choice for low depth-of-cut face milling.
• Maximum number of teeth per diameter.
Indexable Milling Tool Bodies
Special
Design
A
B
C
C
D
D
E
E
H
K
L
M
O
P
P
R
S
T
V
W
X
F
G
N
By referencing this easy-to-use guide,
you can identify the correct product to
meet your needs.
Optional uses as required
Heavy Metal Shank
LH
C
HM
Left Hand
Carbide Shank
100 H N 07 L 800
Shank/Pilot
Diameter Insert Shape Insert
Clearance Angle
Insert Size
(Cutting Edge Length)
Overall Length of Tool
Used for all cylindrical shank and long version
Weldon® if required (standard Weldon without)
M1200D100Z03C100HN07L800
WID_Master16_IndexableMilling_SectionIntro_G014_G015_Metric_REBRAND.indd 15 11/12/15 8:56 AM
G16
LViWID M 16 I d bl Milli S i I G016 G017 M i REBRANDO b 13 20153 51PM
widia.com
Technical Information
PSteel
MStainless Steel
KCast Iron
NNon-Ferrous
SHigh-Temp Alloys
HHardened Materials
Grades and Grade Descriptions
primary use alternate use
WWW Light ( nishing) ¢¢¢ Light ( nishing)
WW Medium ¢¢ Medium
WHeavy (roughing) ¢Heavy (roughing)
Modern coating technologies
provide higher speed capabilities,
greater productivity, and longer
tool life.
Each insert has a material grid
indicating primary and alternate
uses for that tool, as well as
whether it can be operated
dry or with coolant.
Grade PMKNSHdry with
coolant
TN2505
¢¢¢
WWW WWW
•
HC-H05 •PVD-TiAlN
TN2525
WW
¢¢ WW
•
HC-H20 • PVD-TiAlN
TN2510
¢¢
WW WW
•
HC-H10 • MT-CVD/CVD-TiN-TiCN-
(ZrO2-Al2O3-TiOx)
TN6501
WWW
••
HC-N03 • PVD-TiB2
TN6510
WW
•
HC-K10 • PVD-TiAlN Nanolayer
TN6520
WW
••
HC-K20 • PVD-TiAlN Nanolayer
WID_Master16_IndexableMilling_SectionIntro_G016_G017_Metric_REBRAND.indd 16 10/29/15 1:55 PM
G17
LViWID M 16 I d bl Milli S i I G016 G017 M i REBRANDO b 1320153 51PM
widia.com
Grade PMKNSHdry with
coolant
Technical Information
Grades and Grade Descriptions
TN6525
WW
¢¢ ¢¢
•
HC-P25 • PVD-TiAlN Nanolayer
TN6540
W
W¢WW
••
HC-P40 • PVD-TiAlN Nanolayer
TN7525
WW
¢¢
•
HC-P25 • MT-CVD/CVD-TiN-TiCN-Al2O3-TiN
TN7535
W
¢¢
•
HC-P35 • MT-CVD/CVD-TiN-TiCN-Al2O3
TTI25
WWW
¢¢¢
••
HT-P15 • Cermet
THM
¢W¢
••
HW-K15 • Uncoated
PSteel
MStainless Steel
KCast Iron
NNon-Ferrous
SHigh-Temp Alloys
HHardened Materials
Modern coating technologies
provide higher speed capabilities,
greater productivity, and longer
tool life.
Each insert has a material grid
indicating primary and alternate
uses for that tool, as well as
whether it can be operated
dry or with coolant.
primary use alternate use
WWW Light ( nishing) ¢¢¢ Light ( nishing)
WW Medium ¢¢ Medium
WHeavy (roughing) ¢Heavy (roughing)
WID_Master16_IndexableMilling_SectionIntro_G016_G017_Metric_REBRAND.indd 17 10/29/15 1:55 PM
G18
LViWID M 16 I d bl Milli S i I G018 G019 M i REBRANDN b 10 201512 29PM
widia.com
PSteel
MStainless Steel
KCast Iron
NNon-Ferrous
SHigh-Temp Alloys
HHardened Materials
Modern coating technologies
provide higher speed capabilities,
greater productivity, and longer
tool life.
Each insert has a material grid
indicating primary and alternate
uses for that tool, as well as
whether it can be operated
dry or with coolant.
Grade PMKNSHdry with
coolant
Technical Information
Grades and Grade Descriptions
THM-U
WWW
••
HF-N05 • Uncoated
TTM/TTM08
WW
¢¢ ¢¢
••
HW-P25 • Uncoated
WK15PM
WW
••
PVD-TiAlN Nanolayer
WK15CM
™
WW
•
MT-CVD/TiN-TiCN-Al2O3
WP20CM
WW
¢¢
MT-CVD/TiN-TiCN-Al2O3
WP25PM
WW
WW ¢¢ WW ¢¢
••
PVD-AlTiN Multilayer
primary use alternate use
WWW Light ( nishing) ¢¢¢ Light ( nishing)
WW Medium ¢¢ Medium
WHeavy (roughing) ¢Heavy (roughing)
WID_Master16_IndexableMilling_SectionIntro_G018_G019_Metric_REBRAND.indd 18 11/10/15 2:18 PM
G19
LViWID M 16 I d bl Milli S i I G018 G019 M i REBRANDN b 10201512 29PM
widia.com
Grade PMKNSHdry with
coolant
PSteel
MStainless Steel
KCast Iron
NNon-Ferrous
SHigh-Temp Alloys
HHardened Materials
Modern coating technologies
provide higher speed capabilities,
greater productivity, and longer
tool life.
Each insert has a material grid
indicating primary and alternate
uses for that tool, as well as
whether it can be operated
dry or with coolant.
Technical Information
Grades and Grade Descriptions
WU35PM
W
WW
••
PVD-AlTiN Multilayer
WP35CM
W
¢W
•
MT-CVD/TiN-TiCN-Al2O3
WP40PM
™
W
W¢
••
PVD TiAlN-AlCrN Multilayer
WK25YM
WW
•
Silicon Nitride
WS30PM
™
¢¢
WW WW
••
PVD-AlTiN Multilayer
WDN00U
™WWW
WW
W
•
Ultra- ne grain PCD
primary use alternate use
WWW Light ( nishing) ¢¢¢ Light ( nishing)
WW Medium ¢¢ Medium
WHeavy (roughing) ¢Heavy (roughing)
WID_Master16_IndexableMilling_SectionIntro_G018_G019_Metric_REBRAND.indd 19 11/10/15 2:18 PM
LViWID M 16 I d bl Milli F Mill H000 H001 M i REBRANDO b 13 20153 54PM
WID_Master16_IndexableMilling_FaceMills_H000_H001_Metric_REBRAND.indd 1 10/29/15 1:58 PM
H1
LViWID M 16 I d bl Milli F Mill H000 H001 M i REBRANDO b 1320153 54PM
widia.com
M1200 Mini • First Choice for Taper 40 Spindle Machines ..............................................................................H2–H23
M1200 • First Choice for Taper 50 Spindle Machines .....................................................................................H24–H41
M640 • High Positive Geometries for Low Power Machines .........................................................................H42–H49
M660 • Heavy-Duty Applications ......................................................................................................................H50–H60
SuperFeed • PCD Face Milling & End Milling Platform ...................................................................................H62–H68
M4000 • Flexible Cartridge Milling System ......................................................................................................H70–H74
Indexable Milling • Face Mills
WID_Master16_IndexableMilling_FaceMills_H000_H001_Metric_REBRAND.indd 1 10/29/15 1:58 PM
H2
LViWID M 16 I d bl Milli F Mill H002 H003 M i REBRANDN b 12 20158 14AM
widia.com
-FNLDJ
N
Machining
Aluminium
-SNHD
PMKS
Heavy
Machining
-ENLD
PMKS
Light
Machining
-SNGD
PMKS
General
Purpose
• Low cost per edge and high productivity.
• Reduced cutting forces due to soft cutting action.
• Signifi cantly increased Metal Removal Rates (MRR).
• Victory™ M1200 Mini available in 15°, 45°, and 59° lead.
• WIDIA premium milling grades.
• Excellent tool life in light to heavy machining.
• Shorter machining cycle times.
Best-in-class face milling platform to boost productivity
on taper 40 spindle milling machines and driven tools.
Comprehensive standard offering for coarse,
medium, and fi ne pitch cutter bodies to match
all shop fl oor needs.
12 True
Cutting
Edges.
Latest soft cutting edge insert design for
all material groups
Through tool
coolant.
Easy-to-use —
one screw
enables fast,
accurateindexing.
M1200 Mini
One Series Meets Every Face Milling Need •
WIDIA™ Victory™ M1200 Mini
For consistent performance, look no further than the
WIDIA Victory™ M1200 Mini. This easy-to-use product
ensures great tool life, reduced machining time, and
maximum productivity.
WID_Master16_IndexableMilling_FaceMills_H002_H003_Metric_REBRAND.indd 2 11/12/15 8:55 AM
H3
LViWID M 16 I d bl Milli F Mill H002 H003 M i REBRANDN b 1220158 14AM
widia.com
Face Mills
Victory™ M1200 Mini HD 59°
Max depth of cut: 4,7mm
Lead angle: 59°
Indexes per insert: 12
Diameter: 40–125mm
Pages: H20–H23
P
M
K
N
S
P
M
K
N
S
H
Victory™ M1200 Mini 45°
Max depth of cut: 3,5mm
Lead angle: 45°
Indexes per insert: 12
Diameter: 25–120mm
Pages: H12–H19 Pages: H5–H11
Victory™ M1200 Mini HF 15°
Max depth of cut: 1,7mm
Lead angle: 15°
Indexes per insert: 12
Diameter: 25–80mm
P
M
K
N
S
• Wiper inserts only applied with 45° lead angle
cutter bodies.
• Easy to use. Regular and wiper inserts are loaded
into fi xed pockets. No adjustment required.
• Please have D1 max wiper in mind in case of limited
working area.
• Use wiper inserts only in combination with
periphery ground regular inserts HNGJ07.
• Up to cutting diameter D1=100mm load one
wiper insert.
• For cutting diameter D1=125mm and above
load two wiper inserts.
• Each wiper insert XNGJ07 can be applied with three
right hand R and three left hand L cutting edges.
Regular Insert HNGJ07
Wiper Insert XNGJ07
D1 max wiper = D1 max + 2,44mm
Wiper insert overlapping vs.
regular insert
1,22mm
[D1]
[D1 max]
Easy-to-use wiper insert setup to achieve excellent surface fl oor fi nish
WID_Master16_IndexableMilling_FaceMills_H002_H003_Metric_REBRAND.indd 3 11/12/15 8:55 AM
H4
LViWID M 16 I d bl Milli F Mill H004 H005 M i REBRANDN b 23 20152 18PM
widia.com
Victory
™
M1200 Mini HF High-Feed 15°
12
True
Cutting
Edges 15° Lead
Insert HNGJ0704
HNPJ0704
Ap1 max = 1,7mm
M1200 Mini HF can be loaded with all M1200 Mini standard inserts,
except wiper inserts.
First choice for long reach
face milling applications or
light xtures.
Chip thinning effect due to
lead angle 15°. Tremendous
enlargement of feed rate and
MRR.
Up to 40% shorter
machining cycle time.
Victory
™
M1200 Mini HF High-Feed
Victory
™
M1200 Mini Series
Face Mills
59° Lead
Victory
™
M1200 Mini HD 59°
12
True
Cutting
Edges
Insert HNGJ0704
HNPJ0704
Ap1 max = 4,7mm
Achieve a higher axial depth-of-cut capability up to Ap1 = 4,7mm
with standard M1200 Mini inserts.
12
True
Cutting
Edges 45° Lead
Victory
™
M1200 Mini 45°
Insert HNGJ0704
HNPJ0704
Ap1 max = 3,5mm
Best-in-class leader in face milling up to Ap1 max = 3,5mm. Excellent choice
for near net shape strategies and driven tools.
WID_Master16_IndexableMilling_FaceMills_H004_H005_Metric_REBRAND.indd 4 11/23/15 2:18 PM
H5
LViWID M 16 I d bl Milli F Mill H004 H005 M i REBRANDN b 2320152 18PM
widia.com
Face Mills • Victory™ M1200 Mini Series
Victory M1200 Mini HF • Screw-On End Mills
D1
insert
screw Nm
Torx
wrench
25 12146034500 3,5 12148082400
32 12146034500 3,5 12148082400
40 12146034500 3,5 12148082400
Spare Parts
Screw-On End Mills
order number catalogue number D1 D1 max D DPM G3X L1 WF Ap1 max Z max RPM
coolant
supply kg
4136874 M1200HF025Z02M16HN07 25 39 29 17,0 M16 32 22 1,7 2 20000 Yes 0,2
4136875 M1200HF025Z03M16HN07 25 39 29 17,0 M16 32 22 1,7 3 20000 Yes 0,2
4136876 M1200HF032Z03M16HN07 32 46 29 17,0 M16 40 22 1,7 3 17600 Yes 0,3
4136877 M1200HF032Z04M16HN07 32 46 29 17,0 M16 40 22 1,7 4 17600 Yes 0,3
4136878 M1200HF040Z04M16HN07 40 54 29 17,0 M16 40 22 1,7 4 15800 Yes 0,3
4136879 M1200HF040Z05M16HN07 40 54 29 17,0 M16 40 22 1,7 5 15800 Yes 0,3
• Twelve cutting edges.
• First choice for low depth-of-cut face milling.
• High-feed capability.
Face Mills
WID_Master16_IndexableMilling_FaceMills_H004_H005_Metric_REBRAND.indd 5 11/23/15 2:18 PM
H6
LViWID M 16 I d bl Milli F Mill H006 H007 M i REBRANDN b 10 20152 38PM
widia.com
Face Mills • Victory™ M1200 Mini Series
Victory M1200 Mini HF • Cylindrical Shanks
D1
insert
screw Nm
Torx
driver
25 12146034500 3,5 12148082400
32 12146034500 3,5 12148082400
Spare Parts
Cylindrical Shanks
order number catalogue number D1 D1 max D L LBX Ap1 max Z max RPM
coolant
supply kg
4136880 M1200HF025Z02A20HN07L120 25 39,1 20 120 32 1,7 2 20000 Yes 0,33
4136881 M1200HF025Z03A20HN07L120 25 39,1 20 120 32 1,7 3 20000 Yes 0,31
4136882 M1200HF032Z03A25HN07L130 32 46,1 25 130 40 1,7 3 17600 Yes 0,52
4136883 M1200HF032Z04A25HN07L130 32 46,1 25 130 40 1,7 4 17600 Yes 0,53
• Twelve cutting edges.
• First choice for low depth-of-cut face milling.
• High-feed capability.
Face Mills
WID_Master16_IndexableMilling_FaceMills_H006_H007_Metric_REBRAND.indd 6 11/11/15 9:31 AM
H7
LViWID M 16 I d bl Milli F Mill H006 H007 M i REBRANDN b 1020152 38PM
widia.com
Face Mills • Victory™ M1200 Mini Series
Victory M1200 Mini HF • Shell Mills
D1
insert
screw Nm
Torx
driver
socket-head
cap screw
40 12146034500 3,5 12148082400 12146120500
50 12146034500 3,5 12148082400 12146120500
63 12146034500 3,5 12148082400 12146120500
80 12146034500 3,5 12148082400 12748701000
Spare Parts
Shell Mills
order number catalogue number D1 D1 max D D6 L Ap1 max Z max RPM
coolant
supply kg
4136884 M1200HF040Z05HN07 40 54,1 22 38 40 1,7 5 15800 Yes 0,29
4136885 M1200HF050Z05HN07 50 64,1 22 38 40 1,7 5 12700 Yes 0,40
4136886 M1200HF063Z06HN07 63 77,1 22 50 40 1,7 6 10100 Yes 0,67
4136887 M1200HF080Z08HN07 80 94,1 27 60 50 1,7 8 7900 Yes 1,26
• Twelve cutting edges.
• First choice for low depth-of-cut face milling.
• High-feed capability.
Face Mills
WID_Master16_IndexableMilling_FaceMills_H006_H007_Metric_REBRAND.indd 7 11/11/15 9:31 AM
H8
LViWID M 16 I d bl Milli F Mill H008 H009 M i REBRANDO b 14 20159 19AM
widia.com
HNGJ-LDJ
catalogue number
cutting
edges D L10 S BS R¡hm
TN6501
THM-U
HNGJ0704ANFNLDJ 12 13 6,80 4,48 1,60 1,20 0,08
3954414
3954332
rst choice
alternate choice
P
M
K
N
S
H
HNGJ-LD
catalogue number
cutting
edges D L10 S BS R¡hm
TN6510
TN6520
TN6525
TN6540
TN7535
WK15CM
WP25PM
WP35CM
WS30PM
WP40PM
HNGJ0704ANENLD 12 13 6,80 4,48 1,60 1,20 0,08
3954419
3954420
3954421
3954422
–
–
5895291
5895292
5528975
5550905
HNGJ070432ANENLD 12 13 6,80 4,48 — 3,20 0,08
3954428
–
3954429
3954430
–
–
–
–
–
–
rst choice
alternate choice
Face Mills • Victory™ M1200 Mini Series
Inserts
Insert Selection Guide
Material
Group
Light
Machining
General
Purpose
Heavy
Machining
Geometry Grade Geometry Grade Geometry Grade
P1–P2
.E..LD WP40PM
.S..GD WP40PM
.S..HD WP40PM
P3–P4
.E..LD WP25PM
.S..GD WP35CM
.S..HD WP35CM
P5–P6
.E..LD WP25PM
.S..GD WP35CM
.S..HD WP35CM
M1–M2
.E..LD WP25PM
.S..GD WP25PM
.S..HD WP25PM
M3
.E..LD WP35CM
.S..GD WP35CM
.S..HD WP35CM
K1–K2
.E..LD TN6510
.S..GD WK15CM
.S..HD WK15CM
K3
.E..LD WP35CM
.S..GD WP35CM
.S..HD WP35CM
N1–N2
.F..LDJ TN6501
.F..LDJ TN6501
.F..LDJ TN6501
N3
.F..LDJ TN6501
.F..LDJ TN6501
.F..LDJ TN6501
S1–S2
.E..LD WS30PM
.S..GD WS30PM
.S..HD WP25PM
S3
.E..LD WS30PM
.S..GD WS30PM
.S..GD WS30PM
S4
.E..LD WS30PM
.S..GD WS30PM
.S..HD WP40PM
H1
––
––
––
HNGJ-LDJ
HNGJ-LD
Face Mills
P
M
K
N
S
H
WID_Master16_IndexableMilling_FaceMills_H008_H009_Metric_REBRAND.indd 8 10/29/15 1:59 PM
H9
LViWID M 16 I d bl Milli F Mill H008 H009 M i REBRANDO b 1420159 19AM
widia.com
Face Mills • Victory™ M1200 Mini Series
Inserts
HNPJ-GD
catalogue number
cutting
edges D L10 S BS R¡hm
TN6510
TN6520
TN6525
TN6540
TN7535
WK15CM
WP25PM
WP35CM
WS30PM
WP40PM
HNPJ0704ANSNGD 12 13 6,80 4,45 1,27 1,20 0,10
3954432
3954473
–
3954474
3954475
5427374
5895293
5895294
5528976
5550906
rst choice
alternate choice
HNPJ-HD
catalogue number
cutting
edges D L10 S BS R¡hm
TN6510
TN6520
TN6525
TN6540
TN7535
WK15CM
WP25PM
WP35CM
WS30PM
WP40PM
HNPJ0704ANSNHD 12 13 6,80 4,41 1,25 1,20 0,14
3954477
3954478
–
3954479
3954480
5427375
5895295
5895296
–
5550907
HNPJ070432ANSNHD 12 13 6,80 4,42 — 3,20 0,14
3954481
3954482
–
3954483
3954484
–
–
–
–
5895297
HNPJ-GD HNPJ-HD
Face Mills
P
M
K
N
S
H
WID_Master16_IndexableMilling_FaceMills_H008_H009_Metric_REBRAND.indd 9 10/29/15 1:59 PM
H10
LViWID M 16 I d bl Milli F Mill H010 H011 M i REBRANDO b 14 20159 19AM
widia.com
Face Mills • Victory™ M1200 Mini Series
Recommended Starting Speeds
Recommended Starting Speeds [m/min]
Material
Group TN6510 TN6520 TN6525 TN6540 TN7535 WK15CM
P
1
–
–
––
–
– 410
320
280 360
280
240 545
475
445 –
–
–
2
–
–
––
–
– 320
250
215 250
190
170 335
305
275 –
–
–
3
–
–
––
–
– 280
215
185 215
170
140 305
275
245 –
–
–
4
–
–
––
–
– 235
170
145 180
130
110 230
210
190 –
–
–
5
–
–
––
–
– 310
235
200 240
180
150 310
275
250 –
–
–
6
–
–
––
–
– 205
160
130 160
120
100 190
160
130 –
–
–
M
1
–
–
––
–
– 190
120
80 130
80
60 245
220
185 –
–
–
2
–
–
––
–
– 120
80
50 80
50
40 220
190
170 –
–
–
3
–
–
––
–
– 125
80
55 85
50
40 175
155
140 –
–
–
K
1
480
350
260 450
320
230 275
245
220 220
205
180 355
320
290 505
460
410
2
420
280
205 390
250
190 215
190
180 175
155
140 280
250
230 400
355
330
3
335
260
200 300
230
160 180
160
145 155
145
125 235
210
190 335
300
275
N
1
–
–
––
–
––
–
––
–
––
–
––
–
–
2
–
–
––
–
––
–
––
–
––
–
––
–
–
3
–
–
––
–
––
–
––
–
––
–
––
–
–
S
1
–
–
––
–
––
–
–50
35
30 –
–
––
–
–
2
–
–
––
–
––
–
–25
20
10 –
–
––
–
–
3
–
–
––
–
––
–
–70
40
30 –
–
––
–
–
4
–
–
––
–
––
–
–60
30
25 –
–
––
–
–
H
1
–
–
––
–
––
–
––
–
––
–
––
–
–
2
–
–
––
–
––
–
––
–
––
–
––
–
–
3
–
–
––
–
––
–
––
–
––
–
––
–
–
Face Mills
(continued)
WID_Master16_IndexableMilling_FaceMills_H010_H011_Metric_REBRAND.indd 10 10/29/15 1:59 PM
H11
LViWID M 16 I d bl Milli F Mill H010 H011 M i REBRANDO b 1420159 19AM
widia.com
Face Mills • Victory™ M1200 Mini Series
Recommended Starting Speeds
Recommended Starting Feeds [mm]
NOTE: Use “Light Machining” value as starting feed rate.
Light
Machining
General
Purpose
Heavy
Machining
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
.F..LDJ 0,48
0,89
1,81 0,34
0,64
1,29 0,26
0,48
0,96 0,22
0,42
0,83 0,21
0,38
0,76 .F..LDJ
.E..LD 0,48
1,38
2,85 0,34
0,99
2,00 0,26
0,74
1,48 0,22
0,64
1,28 0,21
0,59
1,17 .E..LD
.S..GD 0,92
2,35
3,89 0,66
1,67
2,70 0,49
1,23
1,98 0,43
1,07
1,72 0,39
0,98
1,57 .S..GD
.S..HD 0,92
2,35
3,89 0,66
1,67
2,70 0,49
1,23
1,98 0,43
1,07
1,72 0,39
0,98
1,57 .S..HD
NOTE: FIRST choice starting speeds are in bold type.
As the average chip thickness increases, the speed should be decreased.
Material
Group WP25PM WP35CM WS30PM WP40PM TN6501 THM-U
P
1
395
340
325 545
475
445 –
–
– 355
310
295 –
–
––
–
–
2
330
290
240 335
305
275 –
–
– 300
260
215 –
–
––
–
–
3
305
260
210 305
275
245 –
–
– 275
235
190 –
–
––
–
–
4
270
220
180 230
210
190 –
–
– 245
205
160 –
–
––
–
–
5
220
205
180 310
275
250 –
–
– 205
185
160 –
–
––
–
–
6
200
150
120 190
160
130 –
–
– 180
140
110 –
–
––
–
–
M
1
245
215
200 245
220
185 270
240
220 235
205
185 –
–
––
–
–
2
220
190
155 220
190
170 245
215
175 210
180
150 –
–
––
–
–
3
170
145
115 175
155
140 185
160
125 155
140
110 –
–
––
–
–
K
1
275
245
220 355
320
290 –
–
––
–
––
–
––
–
–
2
215
190
180 280
250
230 –
–
––
–
––
–
––
–
–
3
180
160
145 235
210
190 –
–
––
–
––
–
––
–
–
N
1
–
–
––
–
––
–
––
–
– 2400
1440
1200 2400
1440
1200
2
–
–
––
–
––
–
––
–
– 1640
980
800 1640
980
800
3
–
–
––
–
––
–
––
–
– 960
600
480 960
600
480
S
1
50
40
30 –
–
–55
50
35 50
40
35 –
–
––
–
–
2
50
40
30 –
–
–55
50
35 50
40
35 –
–
––
–
–
3
60
50
30 –
–
–65
55
35 60
50
35 –
–
––
–
–
4
85
60
40 80
60
40 100
70
50 80
60
40 –
–
––
–
–
H
1
145
110
85 –
–
––
–
––
–
––
–
––
–
–
2
–
–
––
–
––
–
––
–
––
–
––
–
–
3
–
–
––
–
––
–
––
–
––
–
––
–
–
Face Mills
Recommended Starting Feeds
(Recommended Starting Speeds [m/min] — continued)
WID_Master16_IndexableMilling_FaceMills_H010_H011_Metric_REBRAND.indd 11 10/29/15 1:59 PM
H12
LViWID M 16 I d bl Milli F Mill H012 H013 M i REBRANDO b 14 20159 19AM
widia.com
Face Mills • Victory™ M1200 Mini Series
Victory M1200 Mini • Screw-On End Mills
D1
insert
screw Nm
Torx
driver
25 12146034500 3,5 12148082400
32 12146034500 3,5 12148082400
40 12146034500 3,5 12148082400
Spare Parts
Screw-On End Mills
order number catalogue number D1 D1 max D DPM G3X L1 WF Ap1 max Z max RPM
coolant
supply kg
3957839 M1200D025Z02M16HN07 25 33,7 29 17,0 M16 32 22 3,5 2 20000 Yes 0,13
3957840 M1200D025Z03M16HN07 25 33,7 29 17,0 M16 32 22 3,5 3 20000 Yes 0,13
3957841 M1200D032Z03M16HN07 32 40,7 29 17,0 M16 40 22 3,5 3 17600 Yes 0,20
3957842 M1200D032Z04M16HN07 32 40,7 29 17,0 M16 40 22 3,5 4 17600 Yes 0,20
3957963 M1200D040Z04M16HN07 40 48,7 29 17,0 M16 40 22 3,5 4 15800 Yes 0,24
3957964 M1200D040Z05M16HN07 40 48,7 29 17,0 M16 40 22 3,5 5 15800 Yes 0,25
Face Mills
• Twelve cutting edges.
• First choice for low depth-of-cut face milling.
• Maximum number of teeth per diameter.
WID_Master16_IndexableMilling_FaceMills_H012_H013_Metric_REBRAND.indd 12 10/29/15 1:59 PM
H13
LViWID M 16 I d bl Milli F Mill H012 H013 M i REBRANDO b 1420159 19AM
widia.com
Face Mills • Victory™ M1200 Mini Series
Victory M1200 Mini • Weldon® Shanks
D1
insert
screw Nm
Torx
driver
25 12146034500 3,5 12148082400
32 12146034500 3,5 12148082400
Spare Parts
Weldon Shanks
order number catalogue number D1 D1 max D L L2 Ap1 max Z max RPM
coolant
supply kg
3958011 M1200D025Z02B20HN07 25 33,7 20 82 32 3,5 2 20000 Yes 0,22
3958012 M1200D025Z03B20HN07 25 33,7 20 82 32 3,5 3 20000 Yes 0,21
3958023 M1200D032Z03B25HN07 32 40,7 25 97 40 3,5 3 17600 Yes 0,39
3958024 M1200D032Z04B25HN07 32 40,7 25 97 40 3,5 4 17600 Yes 0,40
Face Mills
L
• Twelve cutting edges.
• First choice for low depth-of-cut face milling.
• Maximum number of teeth per diameter.
WID_Master16_IndexableMilling_FaceMills_H012_H013_Metric_REBRAND.indd 13 10/29/15 1:59 PM
H14
LViWID M 16 I d bl Milli F Mill H014 H015 M i REBRANDO b 14 20159 19AM
widia.com
Face Mills • Victory™ M1200 Mini Series
Victory M1200 Mini • Cylindrical Shanks
Spare Parts
Cylindrical Shanks
order number catalogue number D1 D1 max D L LBX Ap1 max Z max RPM
coolant
supply kg
3958025 M1200D025Z02A20HN07L120 25 33,7 20 120 32 3,5 2 20000 Yes 0,29
3958026 M1200D025Z03A20HN07L120 25 33,7 20 120 32 3,5 3 20000 Yes 0,28
3958029 M1200D025Z02A25HN07L200 25 33,7 25 200 32 3,5 2 20000 Yes 0,72
3958030 M1200D025Z03A25HN07L200 25 33,7 25 200 32 3,5 3 20000 Yes 0,71
3958027 M1200D032Z03A25HN07L130 32 40,7 25 130 40 3,5 3 17600 Yes 0,49
3958028 M1200D032Z04A25HN07L130 32 40,7 25 130 40 3,5 4 17600 Yes 0,50
Face Mills
• Twelve cutting edges.
• First choice for low depth-of-cut face milling.
• Maximum number of teeth per diameter.
D1
insert
screw Nm
Torx
driver
25 12146034500 3,5 12148082400
32 12146034500 3,5 12148082400
WID_Master16_IndexableMilling_FaceMills_H014_H015_Metric_REBRAND.indd 14 10/29/15 1:59 PM
H15
LViWID M 16 I d bl Milli F Mill H014 H015 M i REBRANDO b 1420159 19AM
widia.com
Face Mills • Victory™ M1200 Mini Series
Victory M1200 Mini • Shell Mills
Spare Parts
Shell Mills
order number catalogue number D1 D1 max D D6 L L2 Ap1 max Z max RPM
coolant
supply kg
3957995 M1200D040Z04HN07 40 48,7 22 38 40 40 3,5 4 15800 Yes 0,26
3957996 M1200D040Z05HN07 40 48,7 22 38 40 40 3,5 5 15800 Yes 0,26
3957997 M1200D050Z04HN07 50 58,7 22 38 40 40 3,5 4 12700 Yes 0,35
3957998 M1200D050Z05HN07 50 58,7 22 38 40 40 3,5 5 12700 Yes 0,36
3957999 M1200D050Z06HN07 50 58,7 22 38 40 40 3,5 6 12700 Yes 0,35
3958000 M1200D063Z04HN07 63 71,7 22 50 40 40 3,5 4 10100 Yes 0,58
3958001 M1200D063Z06HN07 63 71,7 22 50 40 40 3,5 6 10100 Yes 0,65
3958002 M1200D063Z08HN07 63 71,7 22 50 40 40 3,5 8 10100 Yes 0,62
3958003 M1200D080Z05HN07 80 88,7 27 60 50 50 3,5 5 7900 Yes 1,11
3958004 M1200D080Z08HN07 80 88,7 27 60 50 50 3,5 8 7900 Yes 1,24
3958005 M1200D080Z10HN07 80 88,7 27 60 50 50 3,5 10 7900 Yes 1,17
3958006 M1200D100Z06HN07 100 108,7 32 80 50 50 3,5 6 6300 Yes 1,71
3958007 M1200D100Z09HN07 100 108,7 32 80 50 50 3,5 9 6300 Yes 1,82
3958008 M1200D100Z12HN07 100 108,7 32 80 50 50 3,5 12 6300 Yes 1,82
4138470 M1200D125Z08HN07 125 133,7 40 90 63 — 3,5 8 5050 Yes 2,84
4138471 M1200D125Z12HN07 125 133,7 40 90 63 — 3,5 12 5050 Yes 2,96
4138472 M1200D125Z16HN07 125 133,7 40 90 63 — 3,5 16 5050 Yes 3,02
Face Mills
• Twelve cutting edges.
• First choice for low depth-of-cut face milling.
• Maximum number of teeth per diameter.
D1
insert
screw Nm
Torx
driver
socket-head
cap screw
mounting screw
with coolant grooves
coolant
screw assembly
coolant
lock screw
coolant
cap
40 12146034500 3,5 12148082400 — 12146109200 — — —
50 12146034500 3,5 12148082400 12146120500 — — — —
63 12146034500 3,5 12148082400 12146120500 — — — —
80 12146034500 3,5 12148082400 12748701000 — — — —
100 12146034500 3,5 12148082400 — — 12146109400 — —
125 12146034500 3,5 12148082400 — — — 12146107000 12146111000
NOTE: Mounting screw with coolant groove, coolant screw assembly, coolant lock screw, and coolant cap must be ordered separately.
WID_Master16_IndexableMilling_FaceMills_H014_H015_Metric_REBRAND.indd 15 10/29/15 1:59 PM
H16
LViWID M 16 I d bl Milli F Mill H016 H017 M i REBRANDO b 14 20159 21AM
widia.com
Face Mills • Victory™ M1200 Mini Series
Inserts
Insert Selection Guide
Material
Group
Light
Machining
General
Purpose
Heavy
Machining
Geometry Grade Geometry Grade Geometry Grade
P1–P2
.E..LD WP40PM
.S..GD WP40PM
.S..HD WP40PM
P3–P4
.E..LD WP25PM
.S..GD WP35CM
.S..HD WP35CM
P5–P6
.E..LD WP25PM
.S..GD WP35CM
.S..HD WP35CM
M1–M2
.E..LD WP25PM
.S..GD WP25PM
.S..HD WP25PM
M3
.E..LD WP35CM
.S..GD WP35CM
.S..HD WP35CM
K1–K2
.E..LD TN6510
.S..GD WK15CM
.S..HD WK15CM
K3
.E..LD WP35CM
.S..GD WP35CM
.S..HD WP35CM
N1–N2
.F..LDJ TN6501
.F..LDJ TN6501
.F..LDJ TN6501
N3
.F..LDJ TN6501
.F..LDJ TN6501
.F..LDJ TN6501
S1–S2
.E..LD WS30PM
.S..GD WS30PM
.S..HD WP25PM
S3
.E..LD WS30PM
.S..GD WS30PM
.S..GD WS30PM
S4
.E..LD WS30PM
.S..GD WS30PM
.S..HD WP40PM
H1
––
––
––
P
M
K
N
S
H
HNGJ-LDJ
catalogue number
cutting
edges D L10 S BS R¡hm
TN6501
THM-U
HNGJ0704ANFNLDJ 12 13 6,80 4,48 1,60 1,20 0,08
3954414
3954332
rst choice
alternate choice
P
M
K
N
S
H
rst choice
alternate choice
HNGJ-LD
catalogue number
cutting
edges D L10 S BS R¡hm
TN6510
TN6520
TN6525
TN6540
TN7535
WK15CM
WP25PM
WP35CM
WS30PM
WP40PM
HNGJ0704ANENLD 12 13 6,80 4,48 1,60 1,20 0,08
3954419
3954420
3954421
3954422
–
–
5895291
5895292
5528975
5550905
HNGJ070432ANENLD 12 13 6,80 4,48 — 3,20 0,08
3954428
–
3954429
3954430
–
–
–
–
–
–
HNGJ-LDJ
HNGJ-LD
Face Mills
WID_Master16_IndexableMilling_FaceMills_H016_H017_Metric_REBRAND.indd 16 10/29/15 1:59 PM
H17
LViWID M 16 I d bl Milli F Mill H016 H017 M i REBRANDO b 1420159 21AM
widia.com
Face Mills • Victory™ M1200 Mini Series
Inserts
HNPJ-GD
catalogue number
cutting
edges D L10 S BS R¡hm
TN6510
TN6520
TN6525
TN6540
TN7535
WK15CM
WP25PM
WP35CM
WS30PM
WP40PM
HNPJ0704ANSNGD 12 13 6,80 4,45 1,27 1,20 0,10
3954432
3954473
–
3954474
3954475
5427374
5895293
5895294
5528976
5550906
rst choice
alternate choice
HNPJ-HD
catalogue number
cutting
edges D L10 S BS R¡hm
TN6510
TN6520
TN6525
TN6540
TN7535
WK15CM
WP25PM
WP35CM
WS30PM
WP40PM
HNPJ0704ANSNHD 12 13 6,80 4,41 1,25 1,20 0,14
3954477
3954478
–
3954479
3954480
5427375
5895295
5895296
–
5550907
HNPJ070432ANSNHD 12 13 6,80 4,42 — 3,20 0,14
3954481
3954482
–
3954483
3954484
–
–
–
–
5895297
P
M
K
N
S
H
XNGJ-LDJ-3 Wiper
catalogue number
cutting
edges D L10 S BS R¡hm
TN6501
THM-U
XNGJ0704ANFNLDJ3W 3 13 6,78 4,47 6,78 1,30 0,08
3954416
3954433
NOTE: Inserts have 3 right-hand and 3 left-hand cutting edges.
P
M
K
N
S
H
XNGJ-LD3 Wiper
catalogue number
cutting
edges D L10 S BS R¡hm
TN6510
TN6520
TN6525
TN6540
TN7535
WK15CM
WP25PM
WP35CM
WS30PM
WP40PM
XNGJ0704ANENLD3W 3 13 6,78 4,47 6,78 1,30 0,08
3954424
3954425
3954426
3954427
–
5427373
5895298
–
–
5895299
NOTE: Inserts have 3 right-hand and 3 left-hand cutting edges.
rst choice
alternate choice
rst choice
alternate choice
XNGJ-LDJ-3
Wiper
XNGJ-LD3
Wiper
HNPJ-GD HNPJ-HD
Face Mills
P
M
K
N
S
H
WID_Master16_IndexableMilling_FaceMills_H016_H017_Metric_REBRAND.indd 17 10/29/15 1:59 PM
H18
LViWID M 16 I d bl Milli F Mill H018 H019 M i REBRANDO b 14 20159 21AM
widia.com
Face Mills • Victory™ M1200 Mini Series
Recommended Starting Speeds
Recommended Starting Speeds [m/min]
Material
Group TN6510 TN6520 TN6525 TN6540 TN7535 WK15CM
P
1
–
–
––
–
– 410
320
280 360
280
240 545
475
445 –
–
–
2
–
–
––
–
– 320
250
215 250
190
170 335
305
275 –
–
–
3
–
–
––
–
– 280
215
185 215
170
140 305
275
245 –
–
–
4
–
–
––
–
– 235
170
145 180
130
110 230
210
190 –
–
–
5
–
–
––
–
– 310
235
200 240
180
150 310
275
250 –
–
–
6
–
–
––
–
– 205
160
130 160
120
100 190
160
130 –
–
–
M
1
–
–
––
–
– 190
120
80 130
80
60 245
220
185 –
–
–
2
–
–
––
–
– 120
80
50 80
50
40 220
190
170 –
–
–
3
–
–
––
–
– 125
80
55 85
50
40 175
155
140 –
–
–
K
1
480
350
260 450
320
230 275
245
220 220
205
180 355
320
290 505
460
410
2
420
280
205 390
250
190 215
190
180 175
155
140 280
250
230 400
355
330
3
335
260
200 300
230
160 180
160
145 155
145
125 235
210
190 335
300
275
N
1
–
–
––
–
––
–
––
–
––
–
––
–
–
2
–
–
––
–
––
–
––
–
––
–
––
–
–
3
–
–
––
–
––
–
––
–
––
–
––
–
–
S
1
–
–
––
–
––
–
–50
35
30 –
–
––
–
–
2
–
–
––
–
––
–
–25
20
10 –
–
––
–
–
3
–
–
––
–
––
–
–70
40
30 –
–
––
–
–
4
–
–
––
–
––
–
–60
30
25 –
–
––
–
–
H
1
–
–
––
–
––
–
––
–
––
–
––
–
–
2
–
–
––
–
––
–
––
–
––
–
––
–
–
3
–
–
––
–
––
–
––
–
––
–
––
–
–
Face Mills
(continued)
WID_Master16_IndexableMilling_FaceMills_H018_H019_Metric_REBRAND.indd 18 10/29/15 1:59 PM
H19
LViWID M 16 I d bl Milli F Mill H018 H019 M i REBRANDO b 1420159 21AM
widia.com
Face Mills • Victory™ M1200 Mini Series
Recommended Starting Speeds
NOTE: FIRST choice starting speeds are in bold type.
As the average chip thickness increases, the speed should be decreased.
Material
Group WP25PM WP35CM WS30PM WP40PM TN6501 THM-U
P
1
395
340
325 545
475
445 –
–
– 355
310
295 –
–
––
–
–
2
330
290
240 335
305
275 –
–
– 300
260
215 –
–
––
–
–
3
305
260
210 305
275
245 –
–
– 275
235
190 –
–
––
–
–
4
270
220
180 230
210
190 –
–
– 245
205
160 –
–
––
–
–
5
220
205
180 310
275
250 –
–
– 205
185
160 –
–
––
–
–
6
200
150
120 190
160
130 –
–
– 180
140
110 –
–
––
–
–
M
1
245
215
200 245
220
185 270
240
220 235
205
185 –
–
––
–
–
2
220
190
155 220
190
170 245
215
175 210
180
150 –
–
––
–
–
3
170
145
115 175
155
140 185
160
125 155
140
110 –
–
––
–
–
K
1
275
245
220 355
320
290 –
–
––
–
––
–
––
–
–
2
215
190
180 280
250
230 –
–
––
–
––
–
––
–
–
3
180
160
145 235
210
190 –
–
––
–
––
–
––
–
–
N
1
–
–
––
–
––
–
––
–
– 2400
1440
1200 2400
1440
1200
2
–
–
––
–
––
–
––
–
– 1640
980
800 1640
980
800
3
–
–
––
–
––
–
––
–
– 960
600
480 960
600
480
S
1
50
40
30 –
–
–55
50
35 50
40
35 –
–
––
–
–
2
50
40
30 –
–
–55
50
35 50
40
35 –
–
––
–
–
3
60
50
30 –
–
–65
55
35 60
50
35 –
–
––
–
–
4
85
60
40 80
60
40 100
70
50 80
60
40 –
–
––
–
–
H
1
145
110
85 –
–
––
–
––
–
––
–
––
–
–
2
–
–
––
–
––
–
––
–
––
–
––
–
–
3
–
–
––
–
––
–
––
–
––
–
––
–
–
Recommended Starting Feeds [mm]
NOTE: Use “Light Machining” value as starting feed rate.
Light
Machining
General
Purpose
Heavy
Machining
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
.F..LDJ 0,17
0,32
0,65 0,13
0,23
0,47 0,09
0,17
0,35 0,08
0,15
0,31 0,08
0,14
0,28 .F..LDJ
.E..LD 0,17
0,50
1,00 0,13
0,36
0,72 0,09
0,27
0,54 0,08
0,23
0,47 0,08
0,21
0,43 .E..LD
.S..GD 0,33
0,84
1,35 0,24
0,60
0,97 0,18
0,45
0,72 0,16
0,39
0,63 0,14
0,36
0,57 .S..GD
.S..HD 0,33
0,84
1,35 0,24
0,60
0,97 0,18
0,45
0,72 0,16
0,39
0,63 0,14
0,36
0,57 .S..HD
Face Mills
(Recommended Starting Speeds [m/min] — continued)
Recommended Starting Feeds
WID_Master16_IndexableMilling_FaceMills_H018_H019_Metric_REBRAND.indd 19 10/29/15 1:59 PM
H20
LViWID M 16 I d bl Milli F Mill H020 H021 M i REBRANDO b 14 20159 22AM
widia.com
Face Mills
Face Mills • Victory™ M1200 Mini Series
Victory M1200 Mini • HD • Shell Mills
Spare Parts
Shell Mills
order number catalogue number D1 D1 max D D6 L Ap1 max Z max RPM
coolant
supply kg
4136482 M1200HD040Z04HN07 40 46,8 22 38 40 4,7 4 15800 Yes 0,22
4136863 M1200HD040Z05HN07 40 46,8 22 38 40 4,7 5 15800 Yes 0,22
4136864 M1200HD050Z04HN07 50 56,8 22 38 40 4,7 4 12700 Yes 0,34
4136865 M1200HD050Z05HN07 50 56,8 22 38 40 4,7 5 12700 Yes 0,34
4136866 M1200HD063Z04HN07 63 69,8 22 50 40 4,7 4 10100 Yes 0,58
4136867 M1200HD063Z06HN07 63 69,8 22 50 40 4,7 6 10100 Yes 0,60
4136868 M1200HD080Z05HN07 80 86,8 27 60 50 4,7 5 7900 Yes 1,11
4136869 M1200HD080Z08HN07 80 86,8 27 60 50 4,7 8 7900 Yes 1,17
4136870 M1200HD100Z06HN07 100 106,7 32 80 50 4,7 6 6300 Yes 1,74
4136871 M1200HD100Z09HN07 100 106,7 32 80 50 4,7 9 6300 Yes 1,74
4136872 M1200HD125Z08HN07 125 131,7 40 90 63 4,7 8 5050 Yes 2,86
4136873 M1200HD125Z12HN07 125 131,7 40 90 63 4,7 12 5050 Yes 2,90
• Twelve cutting edges.
• Higher axial depth-of-cut capability
with 59° lead angle.
D1
insert
screw Nm
Torx
driver
socket-head
cap screw
mounting screw
with coolant grooves
coolant
screw assembly
coolant
lock screw
coolant
cap
40 12146034500 3,5 12148082400 — 12146109200 — — —
50 12146034500 3,5 12148082400 12146120500 — — — —
63 12146034500 3,5 12148082400 12146120500 — — — —
80 12146034500 3,5 12148082400 12748701000 — — — —
100 12146034500 3,5 12148082400 — — 12146109400 — —
125 12146034500 3,5 12148082400 — — — 12146107000 12146111000
NOTE: Mounting screw with coolant groove, coolant screw assembly, coolant lock screw, and coolant cap must be ordered separately.
WID_Master16_IndexableMilling_FaceMills_H020_H021_Metric_REBRAND.indd 20 10/29/15 1:59 PM
H21
LViWID M 16 I d bl Milli F Mill H020 H021 M i REBRANDO b 1420159 22AM
widia.com
Face Mills • Victory™ M1200 Mini Series
Inserts
Insert Selection Guide
Face Mills
Material
Group
Light
Machining
General
Purpose
Heavy
Machining
Geometry Grade Geometry Grade Geometry Grade
P1–P2
.E..LD WP40PM
.S..GD WP40PM
.S..HD WP40PM
P3–P4
.E..LD WP25PM
.S..GD WP35CM
.S..HD WP35CM
P5–P6
.E..LD WP25PM
.S..GD WP35CM
.S..HD WP35CM
M1–M2
.E..LD WP25PM
.S..GD WP25PM
.S..HD WP25PM
M3
.E..LD WP35CM
.S..GD WP35CM
.S..HD WP35CM
K1–K2
.E..LD TN6510
.S..GD WK15CM
.S..HD WK15CM
K3
.E..LD WP35CM
.S..GD WP35CM
.S..HD WP35CM
N1–N2
.F..LDJ TN6501
.F..LDJ TN6501
.F..LDJ TN6501
N3
.F..LDJ TN6501
.F..LDJ TN6501
.F..LDJ TN6501
S1–S2
.E..LD WS30PM
.S..GD WS30PM
.S..HD WP25PM
S3
.E..LD WS30PM
.S..GD WS30PM
.S..GD WS30PM
S4
.E..LD WS30PM
.S..GD WS30PM
.S..HD WP40PM
H1
––
––
––
P
M
K
N
S
H
HNGJ-LDJ
catalogue number
cutting
edges D L10 S BS R¡hm
TN6501
THM-U
HNGJ0704ANFNLDJ 12 13 6,80 4,48 1,60 1,20 0,08
3954414
3954332
rst choice
alternate choice
P
M
K
N
S
H
rst choice
alternate choice
HNGJ-LD
catalogue number
cutting
edges D L10 S BS R¡hm
TN6510
TN6520
TN6525
TN6540
TN7535
WK15CM
WP25PM
WP35CM
WS30PM
WP40PM
HNGJ0704ANENLD 12 13 6,80 4,48 1,60 1,20 0,08
3954419
3954420
3954421
3954422
–
–
5895291
5895292
5528975
5550905
HNGJ070432ANENLD 12 13 6,80 4,48 — 3,20 0,08
3954428
–
3954429
3954430
–
–
–
–
–
–
HNGJ-LDJ
HNGJ-LD
WID_Master16_IndexableMilling_FaceMills_H020_H021_Metric_REBRAND.indd 21 10/29/15 1:59 PM
H22
LViWID M 16 I d bl Milli F Mill H022 H023 M i REBRANDO b 14 20159 22AM
widia.com
Face Mills • Victory™ M1200 Mini Series
Inserts
HNPJ-GD
catalogue number
cutting
edges D L10 S BS R¡hm
TN6510
TN6520
TN6525
TN6540
TN7535
WK15CM
WP25PM
WP35CM
WS30PM
WP40PM
HNPJ0704ANSNGD 12 13 6,80 4,45 1,27 1,20 0,10
3954432
3954473
–
3954474
3954475
5427374
5895293
5895294
5528976
5550906
rst choice
alternate choice
HNPJ-HD
catalogue number
cutting
edges D L10 S BS R¡hm
TN6510
TN6520
TN6525
TN6540
TN7535
WK15CM
WP25PM
WP35CM
WS30PM
WP40PM
HNPJ0704ANSNHD 12 13 6,80 4,41 1,25 1,20 0,14
3954477
3954478
–
3954479
3954480
5427375
5895295
5895296
–
5550907
HNPJ070432ANSNHD 12 13 6,80 4,42 — 3,20 0,14
3954481
3954482
–
3954483
3954484
–
–
–
–
5895297
Recommended Starting Speeds [m/min]
Material
Group TN6510 TN6520 TN6525 TN6540 TN7535 WK15CM
P
1
–
–
––
–
– 410
320
280 360
280
240 545
475
445 –
–
–
2
–
–
––
–
– 320
250
215 250
190
170 335
305
275 –
–
–
3
–
–
––
–
– 280
215
185 215
170
140 305
275
245 –
–
–
4
–
–
––
–
– 235
170
145 180
130
110 230
210
190 –
–
–
5
–
–
––
–
– 310
235
200 240
180
150 310
275
250 –
–
–
6
–
–
––
–
– 205
160
130 160
120
100 190
160
130 –
–
–
M
1
–
–
––
–
– 190
120
80 130
80
60 245
220
185 –
–
–
2
–
–
––
–
– 120
80
50 80
50
40 220
190
170 –
–
–
3
–
–
––
–
– 125
80
55 85
50
40 175
155
140 –
–
–
K
1
480
350
260 450
320
230 275
245
220 220
205
180 355
320
290 505
460
410
2
420
280
205 390
250
190 215
190
180 175
155
140 280
250
230 400
355
330
3
335
260
200 300
230
160 180
160
145 155
145
125 235
210
190 335
300
275
N
1
–
–
––
–
––
–
––
–
––
–
––
–
–
2
–
–
––
–
––
–
––
–
––
–
––
–
–
3
–
–
––
–
––
–
––
–
––
–
––
–
–
S
1
–
–
––
–
––
–
–50
35
30 –
–
––
–
–
2
–
–
––
–
––
–
–25
20
10 –
–
––
–
–
3
–
–
––
–
––
–
–70
40
30 –
–
––
–
–
4
–
–
––
–
––
–
–60
30
25 –
–
––
–
–
H
1
–
–
––
–
––
–
––
–
––
–
––
–
–
2
–
–
––
–
––
–
––
–
––
–
––
–
–
3
–
–
––
–
––
–
––
–
––
–
––
–
–
Face Mills
HNPJ-GD HNPJ-HD
P
M
K
N
S
H
Recommended Starting Speeds
(continued)
WID_Master16_IndexableMilling_FaceMills_H022_H023_Metric_REBRAND.indd 22 10/29/15 1:59 PM
H23
LViWID M 16 I d bl Milli F Mill H022 H023 M i REBRANDO b 1420159 22AM
widia.com
Face Mills • Victory™ M1200 Mini Series
Face Mills
NOTE: FIRST choice starting speeds are in bold type.
As the average chip thickness increases, the speed should be decreased.
Material
Group WP25PM WP35CM WS30PM WP40PM TN6501 THM-U
P
1
395
340
325 545
475
445 –
–
– 355
310
295 –
–
––
–
–
2
330
290
240 335
305
275 –
–
– 300
260
215 –
–
––
–
–
3
305
260
210 305
275
245 –
–
– 275
235
190 –
–
––
–
–
4
270
220
180 230
210
190 –
–
– 245
205
160 –
–
––
–
–
5
220
205
180 310
275
250 –
–
– 205
185
160 –
–
––
–
–
6
200
150
120 190
160
130 –
–
– 180
140
110 –
–
––
–
–
M
1
245
215
200 245
220
185 270
240
220 235
205
185 –
–
––
–
–
2
220
190
155 220
190
170 245
215
175 210
180
150 –
–
––
–
–
3
170
145
115 175
155
140 185
160
125 155
140
110 –
–
––
–
–
K
1
275
245
220 355
320
290 –
–
––
–
––
–
––
–
–
2
215
190
180 280
250
230 –
–
––
–
––
–
––
–
–
3
180
160
145 235
210
190 –
–
––
–
––
–
––
–
–
N
1
–
–
––
–
––
–
––
–
– 2400
1440
1200 2400
1440
1200
2
–
–
––
–
––
–
––
–
– 1640
980
800 1640
980
800
3
–
–
––
–
––
–
––
–
– 960
600
480 960
600
480
S
1
50
40
30 –
–
–55
50
35 50
40
35 –
–
––
–
–
2
50
40
30 –
–
–55
50
35 50
40
35 –
–
––
–
–
3
60
50
30 –
–
–65
55
35 60
50
35 –
–
––
–
–
4
85
60
40 80
60
40 100
70
50 80
60
40 –
–
––
–
–
H
1
145
110
85 –
–
––
–
––
–
––
–
––
–
–
2
–
–
––
–
––
–
––
–
––
–
––
–
–
3
–
–
––
–
––
–
––
–
––
–
––
–
–
Recommended Starting Speeds
(Recommended Starting Speeds [m/min] — continued)
Recommended Starting Feeds [mm]
NOTE: Use “Light Machining” value as starting feed rate.
Light
Machining
General
Purpose
Heavy
Machining
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
.F..LDJ 0,14
0,26
0,53 0,10
0,19
0,38 0,08
0,14
0,29 0,07
0,12
0,25 0,06
0,11
0,23 .F..LDJ
.E..LD 0,14
0,41
0,82 0,10
0,29
0,59 0,08
0,22
0,44 0,07
0,19
0,38 0,06
0,18
0,35 .E..LD
.S..GD 0,27
0,68
1,10 0,20
0,49
0,79 0,15
0,37
0,59 0,13
0,32
0,51 0,12
0,29
0,47 .S..GD
.S..HD 0,27
0,68
1,10 0,20
0,49
0,79 0,15
0,37
0,59 0,13
0,32
0,51 0,12
0,29
0,47 .S..HD
Recommended Starting Feeds
WID_Master16_IndexableMilling_FaceMills_H022_H023_Metric_REBRAND.indd 23 10/29/15 1:59 PM
H24
LViWID M 16 I d bl Milli F Mill H024 H025 M i REBRANDN b 12 20158 15AM
widia.com
Through tool coolant.
Easy-to-use — one screw enables fast,
accurateindexing.
The latest technology with twelve true cutting edges
and high-precision pressed and ground inserts.
Best-in-class face milling platform to boost productivity
on taper 50 spindle milling machines.
Comprehensive standard offering for
coarse, medium, and fi ne pitch cutter
bodies to match all shop fl oor needs.
M1200
• Low cost per edge; high productivity.
• 14.5–59° lead angles.
• One series meets every face milling need.
• Available in WIDIA premium milling grades.
• Better tool life in light to heavy machining.
One Series Meets Every Face Milling Need •
WIDIA™ Victory™ M1200 Series
WID_Master16_IndexableMilling_FaceMills_H024_H025_Metric_REBRAND.indd 24 11/12/15 8:55 AM
H25
LViWID M 16 I d bl Milli F Mill H024 H025 M i REBRANDN b 1220158 15AM
widia.com
Face Mills Victory™ M1200 45°
Max depth of cut: 4,5mm
Lead angle: 45°
Indexes per insert: 12
Diameter: 40–315mm
Pages: H30–H37
P
M
K
N
S
H
P
M
K
N
S
Victory™ M1200 HF 14.5°
Max depth of cut: 2,2mm
Lead angle: 14.5°
Indexes per insert: 12
Diameter: 50–160mm
Pages: H26–H29
Victory™ M1200 HD 59°
Max depth of cut: 6mm
Lead angle: 59°
Indexes per insert: 12
Diameter: 50–160mm
Pages: H38–H41
P
M
K
N
S
• Wiper inserts only applied with 45° lead angle cutter bodies.
• Easy to use. Regular and wiper inserts are loaded into fi xed
pockets. No adjustment required.
• Please have D1 max wiper in mind in case of
limited working area.
• Use wiper inserts only in combination with periphery ground
regular inserts HNGJ09.
• Up to cutting diameter D1=100mm load one wiper insert.
• For cutting diameter D1=125mm and above load
two wiper inserts.
• Each wiper insert XNGJ09 can be applied with three
right hand R and three left hand L cutting edges.
Regular Insert HNGJ09
Wiper Insert XNGJ09
D1 max Wiper = D1 max + 3,00mm
Wiper insert overlapping
vs. regular insert
1,50mm
[D1]
[D1 max]
Easy-to-use wiper insert setup to achieve excellent surface fl oor fi nish
WID_Master16_IndexableMilling_FaceMills_H024_H025_Metric_REBRAND.indd 25 11/12/15 8:56 AM
H26
LViWID M 16 I d bl Milli F Mill H026 H027 M i REBRANDO b 19 20152 10PM
widia.com
Face Mills • Victory™ M1200 Series
Victory M1200 HF • Shell Mills
D1
insert
screw Nm
Torx
driver
socket-head
cap screw
socket-head cap screw
with coolant groove
coolant lock
screw assembly
coolant
lock screw
coolant
cap
50 12146034500 3,5 12148082400 12146120500 12146101000 — — —
63 12146034500 3,5 12148082400 12146120500 12146101000 — — —
80 12146034500 3,5 12148082400 12748701000 12146101800 — — —
100 12146034500 3,5 12148082400 — — 12146109400 — —
125 12146034500 3,5 12148082400 — — — 12146107000 12146111000
160 12146034500 3,5 12148082400 — — — 12146107000 12146111100
Spare Parts
Shell Mills
order number catalogue number D1 D1 max D D6 L Ap1 max Z max RPM
coolant
supply kg
3750370 M1200HF050Z04HN09 50 67,9 22 38 40 2,2 4 11400 Yes 0,65
3750372 M1200HF063Z05HN09 63 80,9 22 50 40 2,2 5 8950 Yes 0,65
3750434 M1200HF080Z06HN09 80 97,9 27 60 50 2,2 6 7300 Yes 1,24
3750435 M1200HF100Z08HN09 100 117,9 32 80 50 2,2 8 5900 Yes 1,89
3750436 M1200HF125Z09HN09 125 142,9 40 90 63 2,2 9 4800 Yes 3,23
3957969 M1200HF160Z12HN09 160 177,9 40 110 63 2,2 12 3900 Yes 5,14
• Twelve cutting edges.
• High feed rates for rough face milling.
• Use standard M1200 inserts.
• Do not load wiper inserts.
Face Mills
NOTE: Socket-head cap screw with coolant groove, coolant lock screw assembly, coolant lock screw, and coolant cap must be ordered separately.
WID_Master16_IndexableMilling_FaceMills_H026_H027_Metric_REBRAND.indd 26 10/29/15 1:59 PM
H27
LViWID M 16 I d bl Milli F Mill H026 H027 M i REBRANDO b 1920152 10PM
widia.com
P
M
K
N
S
H
catalogue number
cutting
edges D L10 S BS R¡hm
TN6501
THM-U
HNGJ0905ANFNLDJ 12 16 8,58 5,56 1,80 1,20 0,02
3865373
3606383
rst choice
alternate choice
HNGJ-LDJ
P
M
K
N
S
H
HNPJ-GD
rst choice
alternate choice
Face Mills • Victory™ M1200 Series
Inserts
Insert Selection Guide
Material
Group
Light
Machining
General
Purpose
Heavy
Machining
Geometry Grade Geometry Grade Geometry Grade
P1–P2
.E..LD WP40PM
.S..GD WP40PM
.S..HD WP40PM
P3–P4
.E..LD WP25PM
.S..GD WP35CM
.S..HD WP35CM
P5–P6
.E..LD WP25PM
.S..GD WP35CM
.S..HD WP35CM
M1–M2
.E..LD WP25PM
.S..GD WP25PM
.S..HD WP25PM
M3
.E..LD WP35CM
.S..GD WP35CM
.S..HD WP35CM
K1–K2
.E..LD TN6520
.S..GD WK15CM
.S..HD WK15CM
K3
.E..LD WP35CM
.S..GD WP35CM
.S..HD WP35CM
N1–N2
.F..LDJ TN6501
.F..LDJ TN6501
.F..LDJ TN6501
N3
.F..LDJ TN6501
.F..LDJ TN6501
.F..LDJ TN6501
S1–S2
.E..LD WS30PM
.S..GD WS30PM
.S..HD WP25PM
S3
.E..LD WS30PM
.S..GD WS30PM
.S..HD WP40PM
S4
.E..LD WS30PM
.S..GD WS30PM
.S..HD WP40PM
H1
––
––
––
catalogue number
cutting
edges D L10 S BS R¡hm
TN6520
TN6525
TN6540
TN7535
WK15CM
WP25PM
WS30PM
WP35CM
WP40PM
HNPJ0905ANSNGD 12 16 8,58 5,56 1,80 1,20 0,10
3761185
—
3761187
3761188
5427372
5895374
—
5895375
5550908
Face Mills
HNPJ-GD
HNGJ-LDJ
WID_Master16_IndexableMilling_FaceMills_H026_H027_Metric_REBRAND.indd 27 10/29/15 1:59 PM
H28
LViWID M 16 I d bl Milli F Mill H028 H029 M i REBRANDO b 14 20159 25AM
widia.com
Face Mills • Victory™ M1200 Series
Inserts
rst choice
alternate choice
HNPJ-HD
catalogue number
cutting
edges D L10 S BS R¡hm
TN6520
TN6525
TN6540
TN7535
WK15CM
WP25PM
WS30PM
WP35CM
WP40PM
HNPJ090543ANSNHD 12 16 8,50 5,44 — 4,34 0,13
3670866
—
3670865
—
—
5895378
—
5895379
5895380
HNPJ0905ANSNHD 12 16 8,59 5,46 1,66 1,20 0,18
3670864
—
3670842
—
5427371
5895376
—
5895377
5550909
HNGJ-HD
catalogue number
cutting
edges D L10 S BS R¡hm
TN6520
TN6525
TN6540
TN7535
WK15CM
WP25PM
WS30PM
WP35CM
WP40PM
HNGJ090543ANSNHD 12 16 8,50 5,44 — 4,35 0,20
3564083
3564084
3564085
—
—
—
—
—
—
HNGJ0905ANSNHD 12 16 8,59 5,46 1,66 1,20 0,17
3563900
3563901
3563902
—
—
5895371
—
5895372
5895373
HNGJ-GD
catalogue number
cutting
edges D L10 S BS R¡hm
TN6520
TN6525
TN6540
TN7535
WK15CM
WP25PM
WS30PM
WP35CM
WP40PM
HNGJ0905ANSNGD 12 16 8,58 5,56 1,80 1,20 0,10
3119541
3614650
3037596
3093721
5427370
—
5528974
5895349
5895350
Face Mills
HNGJ-GD HNPJ-HD HNGJ-HD
P
M
K
N
S
H
WID_Master16_IndexableMilling_FaceMills_H028_H029_Metric_REBRAND.indd 28 10/29/15 1:59 PM
H29
LViWID M 16 I d bl Milli F Mill H028 H029 M i REBRANDO b 1420159 25AM
widia.com
Face Mills
Face Mills • Victory™ M1200 Series
Recommended Starting Speeds
Recommended Starting Speeds [m/min]
Material
Group TN6520 TN6525 TN6540 TN7535 WK15CM WP25PM
P
1
–
–
– 410
320
280 360
280
240 545
475
445 –
–
– 395
340
325
2
–
–
– 320
250
215 250
190
170 335
305
275 –
–
– 330
290
240
3
–
–
– 280
215
185 215
170
140 305
275
245 –
–
– 305
260
210
4
–
–
– 235
170
145 180
130
110 230
210
190 –
–
– 270
220
180
5
–
–
– 310
235
200 240
180
150 310
275
250 –
–
– 220
205
180
6
–
–
– 205
160
130 160
120
100 190
160
130 –
–
– 200
150
120
M
1
–
–
– 190
120
80 130
80
60 245
220
185 –
–
– 245
215
200
2
–
–
– 120
80
50 80
50
40 220
190
170 –
–
– 220
190
155
3
–
–
– 125
80
55 85
50
40 175
155
140 –
–
– 170
145
115
K
1
450
320
230 275
245
220 220
205
180 355
320
290 505
460
410 275
245
220
2
390
250
190 215
190
180 175
155
140 280
250
230 400
355
330 215
190
180
3
300
230
160 180
160
145 155
145
125 235
210
190 335
300
275 180
160
145
N
1
–
–
––
–
––
–
––
–
––
–
––
–
–
2
–
–
––
–
––
–
––
–
––
–
––
–
–
3
–
–
––
–
––
–
––
–
––
–
––
–
–
S
1
–
–
––
–
–50
35
30 –
–
––
–
–50
40
30
2
–
–
––
–
–25
20
10 –
–
––
–
–50
40
30
3
–
–
––
–
–70
40
30 –
–
––
–
–60
50
30
4
–
–
––
–
–60
30
25 –
–
––
–
–85
60
40
H
1
–
–
––
–
––
–
––
–
––
–
– 145
110
85
2
–
–
––
–
––
–
––
–
––
–
––
–
–
3
–
–
––
–
––
–
––
–
––
–
––
–
–
NOTE: FIRST choice starting speeds are in bold type.
As the average chip thickness increases, the speed should be decreased.
Material
Group WS30PM WP35CM WP40PM TN6501 THM-U
P
1
–
–
– 545
475
445 355
310
295 –
–
––
–
–
2
–
–
– 335
305
275 300
260
215 –
–
––
–
–
3
–
–
– 305
275
245 275
235
190 –
–
––
–
–
4
–
–
– 230
210
190 245
205
160 –
–
––
–
–
5
–
–
– 310
275
250 205
185
160 –
–
––
–
–
6
–
–
– 190
160
130 180
140
110 –
–
––
–
–
M
1
270
240
220 245
220
185 235
205
185 –
–
––
–
–
2
245
215
175 220
190
170 210
180
150 –
–
––
–
–
3
185
160
125 175
155
140 155
140
110 –
–
––
–
–
K
1
–
–
– 355
320
290 –
–
––
–
––
–
–
2
–
–
– 280
250
230 –
–
––
–
––
–
–
3
–
–
– 235
210
190 –
–
––
–
––
–
–
N
1
–
–
––
–
––
–
– 2400
1440
1200 2400
1440
1200
2
–
–
––
–
––
–
– 1640
980
800 1640
980
800
3
–
–
––
–
––
–
– 960
600
480 960
600
480
S
1
55
50
35 –
–
–50
40
35 –
–
––
–
–
2
55
50
35 –
–
–50
40
35 –
–
––
–
–
3
65
55
35 –
–
–60
50
35 –
–
––
–
–
4
100
70
50 80
60
40 80
60
40 –
–
––
–
–
H
1
–
–
––
–
––
–
––
–
––
–
–
2
–
–
––
–
––
–
––
–
––
–
–
3
–
–
––
–
––
–
––
–
––
–
–
Recommended Starting Feeds [mm]
NOTE: Use “Light Machining” value as starting feed rate.
Light
Machining
General
Purpose
Heavy
Machining
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
.F..LDJ 0,45
0,90
1,84 0,33
0,65
1,31 0,25
0,48
0,97 0,21
0,42
0,84 0,20
0,39
0,77 .F..LDJ
.E..LD 0,45
1,36
2,81 0,33
0,98
1,97 0,25
0,73
1,46 0,21
0,63
1,27 0,20
0,58
1,16 .E..LD
.S..GD 0,72
2,35
3,89 0,52
1,67
2,70 0,39
1,23
1,98 0,34
1,07
1,72 0,31
0,98
1,57 .S..GD
.S..HD 0,92
2,35
3,89 0,66
1,67
2,70 0,49
1,23
1,98 0,43
1,07
1,72 0,39
0,98
1,57 .S..HD
Recommended Starting Feeds
WID_Master16_IndexableMilling_FaceMills_H028_H029_Metric_REBRAND.indd 29 10/29/15 1:59 PM
H30
LViWID M 16 I d bl Milli F Mill H030 H031 M i REBRANDO b 14 20159 26AM
widia.com
Face Mills • Victory™ M1200 Series
Victory M1200 • Weldon® Shanks
D1
insert
screw Nm
Torx
driver
40 12146034500 3,5 12148082400
Spare Parts
Weldon Shanks
order number catalogue number D1 D1 max D L L2 Ap1 max Z max RPM
coolant
supply kg
3325311 M1200D040Z04B25HN09 40 51,0 25 107 50 4,5 4 15800 Yes 0,52
3325310 M1200D040Z03B25HN09 40 51,0 25 107 50 4,5 3 15800 Yes 0,53
Face Mills
• Twelve cutting edges.
• First choice for general face milling.
• Low cutting forces for maximum productivity.
WID_Master16_IndexableMilling_FaceMills_H030_H031_Metric_REBRAND.indd 30 10/29/15 1:59 PM
H31
LViWID M 16 I d bl Milli F Mill H030 H031 M i REBRANDO b 1420159 26AM
widia.com
Face Mills • Victory™ M1200 Series
Victory M1200 • Shell Mills
Shell Mills
order number catalogue number D1 D1 max D D4 D6 L Ap1 max Z max RPM
coolant
supply kg
3957970 M1200D040Z03HN09 40 51,0 22 — 39 40 4,4 3 15800 Yes 0,26
3957971 M1200D040Z04HN09 40 51,0 22 — 39 40 4,4 4 15800 Yes 0,25
3325312 M1200D050Z04HN09 50 61,0 22 — 38 40 4,5 4 12700 Yes 0,32
3325693 M1200D050Z05HN09 50 61,0 22 — 38 40 4,5 5 12700 Yes 0,33
3650535 M1200D063Z04HN09 63 74,0 22 — 50 40 4,5 4 10100 Yes 0,59
3093594 M1200D063Z06HN09 63 74,0 22 — 50 40 4,5 6 10100 Yes 0,56
3025376 M1200D063Z07HN09 63 74,0 22 — 50 40 4,5 7 10100 Yes 0,57
3650536 M1200D080Z05HN09 80 91,0 27 — 60 50 4,5 5 7900 Yes 1,12
3081507 M1200D080Z06HN09 80 91,0 27 — 60 50 4,5 6 7900 Yes 1,07
3025377 M1200D080Z09HN09 80 91,0 27 — 60 50 4,5 9 7900 Yes 1,11
3650537 M1200D100Z06HN09 100 111,0 32 — 80 50 4,5 6 6300 Yes 1,73
3325694 M1200D100Z08HN09 100 111,0 32 — 80 50 4,5 8 6300 Yes 1,68
3025378 M1200D100Z11HN09 100 111,0 32 — 80 50 4,5 11 6300 Yes 1,73
3650538 M1200D125Z08HN09 125 135,9 40 — 90 63 4,5 8 5050 Yes 2,84
3081508 M1200D125Z10HN09 125 135,9 40 — 90 63 4,5 10 5050 Yes 2,77
3093593 M1200D125Z14HN09 125 136,0 40 — 90 63 4,5 14 5050 Yes 2,86
3066118 M1200D160Z12HN09 160 171,0 40 66,7 110 63 4,5 12 3900 Yes 4,56
3066119 M1200D160Z16HN09 160 171,0 40 66,7 110 63 4,5 16 3900 Yes 4,70
3957972 M1200D200Z16HN09 200 211,0 60 101,6 130 63 4,5 16 3180 Yes 6,43
3957993 M1200D250Z20HN09 250 261,0 60 101,6 130 63 4,5 20 2550 Yes 9,93
3957994 M1200D315Z24HN09 315 326,0 60 101,6 230 80 4,5 24 2020 Yes 22,90
• Twelve cutting edges.
• First choice for general face milling.
• Low cutting forces for maximum productivity.
Face Mills
(continued)
WID_Master16_IndexableMilling_FaceMills_H030_H031_Metric_REBRAND.indd 31 10/29/15 1:59 PM
H32
LViWID M 16 I d bl Milli F Mill H032 H033 M i REBRANDN b 11 20158 29AM
widia.com
D1
insert
screw Nm
Torx
driver
socket-head
cap screw
socket-head cap screw
with coolant groove
coolant
screw assembly
coolant
lock screw
coolant
cap
40 12146034500 3,5 12148082400 — 12146109200 — — —
50 12146034500 3,5 12148082400 — — — — —
63 12146034500 3,5 12148082400 — — — — —
80 12146034500 3,5 12148082400 12748701000 — — — —
100 12146034500 3,5 12148082400 — — 12146109400 — —
125 12146034500 3,5 12148082400 — — — 12146107000 12146111000
160 12146034500 3,5 12148082400 — — — 12146107000 12146111100
200 12146034500 3,5 12148082400 — — — — 12146111200
250 12146034500 3,5 12148082400 — — — — 12146111300
315 12146034500 3,5 12148082400 — — — — 12146111400
Spare Parts
Face Mills • Victory™ M1200 Series
Victory M1200 • Shell Mills
Face Mills
(Shell Mills — continued)
NOTE: Socket-head cap screw with coolant groove, coolant screw assembly, coolant lock screw, and coolant cap must be ordered separately.
WID_Master16_IndexableMilling_FaceMills_H032_H033_Metric_REBRAND.indd 32 11/11/15 9:31 AM
H33
LViWID M 16 I d bl Milli F Mill H032 H033 M i REBRANDN b 1120158 29AM
widia.com
Face Mills • Victory™ M1200 Series
Inserts
Insert Selection Guide
Material
Group
Light
Machining
General
Purpose
Heavy
Machining
Geometry Grade Geometry Grade Geometry Grade
P1–P2
.E..LD WP40PM
.S..GD WP40PM
.S..HD WP40PM
P3–P4
.E..LD WP25PM
.S..GD WP35CM
.S..HD WP35CM
P5–P6
.E..LD WP25PM
.S..GD WP35CM
.S..HD WP35CM
M1–M2
.E..LD WP25PM
.S..GD WP25PM
.S..HD WP25PM
M3
.E..LD WP35CM
.S..GD WP35CM
.S..HD WP35CM
K1–K2
.E..LD TN6520
.S..GD WK15CM
.S..HD WK15CM
K3
.E..LD WP35CM
.S..GD WP35CM
.S..HD WP35CM
N1–N2
.F..LDJ TN6501
.F..LDJ TN6501
.F..LDJ TN6501
N3
.F..LDJ TN6501
.F..LDJ TN6501
.F..LDJ TN6501
S1–S2
.E..LD WS30PM
.S..GD WS30PM
.S..HD WP25PM
S3
.E..LD WS30PM
.S..GD WS30PM
.S..HD WP40PM
S4
.E..LD WS30PM
.S..GD WS30PM
.S..HD WP40PM
H1
––
––
––
P
M
K
N
S
H
HNGJ-LDJ
catalogue number
cutting
edges D L10 S BS R¡hm
TN6501
THM-U
HNGJ0905ANFNLDJ 12 16 8,58 5,56 1,80 1,20 0,02
3865373
3606383
rst choice
alternate choice
HNGJ-LDJ
P
M
K
N
S
H
HNGJ-LD
catalogue number
cutting
edges D L10 S BS R¡hm
TN6520
TN6525
TN6540
TN7535
WK15CM
WP25PM
WS30PM
WP35CM
WP40PM
HNGJ0905ANENLD 12 16 8,58 5,56 1,80 1,20 0,05
3093559
3330950
3030034
3030017
—
5895346
5528973
5895347
5895348
rst choice
alternate choice
HNGJ-LD
Face Mills
WID_Master16_IndexableMilling_FaceMills_H032_H033_Metric_REBRAND.indd 33 11/11/15 9:31 AM
H34
LViWID M 16 I d bl Milli F Mill H034 H035 M i REBRANDO b 19 20152 10PM
widia.com
Face Mills • Victory™ M1200 Series
Inserts
HNPJ-GD
catalogue number
cutting
edges D L10 S BS R¡hm
TN6520
TN6525
TN6540
TN7535
WK15CM
WP25PM
WS30PM
WP35CM
WP40PM
HNPJ0905ANSNGD 12 16 8,58 5,56 1,80 1,20 0,10
3761185
—
3761187
3761188
5427372
5895374
—
5895375
5550908
rst choice
alternate choice
HNPJ-GD
HNGJ-GD
catalogue number
cutting
edges D L10 S BS R¡hm
TN6520
TN6525
TN6540
TN7535
WK15CM
WP25PM
WS30PM
WP35CM
WP40PM
HNGJ0905ANSNGD 12 16 8,58 5,56 1,80 1,20 0,10
3119541
3614650
3037596
3093721
5427370
—
5528974
5895349
5895350
HNGJ-GD
HNPJ-HD
catalogue number
cutting
edges D L10 S BS R¡hm
TN6520
TN6525
TN6540
TN7535
WK15CM
WP25PM
WS30PM
WP35CM
WP40PM
HNPJ090543ANSNHD 12 16 8,50 5,44 — 4,34 0,13
3670866
—
3670865
—
—
5895378
—
5895379
5895380
HNPJ0905ANSNHD 12 16 8,59 5,46 1,66 1,20 0,18
3670864
—
3670842
—
5427371
5895376
—
5895377
5550909
HNPJ-HD
HNGJ-HD
catalogue number
cutting
edges D L10 S BS R¡hm
TN6520
TN6525
TN6540
TN7535
WK15CM
WP25PM
WS30PM
WP35CM
WP40PM
HNGJ090543ANSNHD 12 16 8,50 5,44 — 4,35 0,20
3564083
3564084
3564085
—
—
—
—
—
—
HNGJ0905ANSNHD 12 16 8,59 5,46 1,66 1,20 0,17
3563900
3563901
3563902
—
—
5895371
—
5895372
5895373
HNGJ-HD
Face Mills
P
M
K
N
S
H
WID_Master16_IndexableMilling_FaceMills_H034_H035_Metric_REBRAND.indd 34 10/29/15 2:00 PM
H35
LViWID M 16 I d bl Milli F Mill H034 H035 M i REBRANDO b 1920152 10PM
widia.com
Face Mills • Victory™ M1200 Series
Inserts
XNGJ-LDJ3
Wiper
catalogue number
cutting
edges D L10 S BS R¡hm
WK25YM
HNEC0905ANSN 12 16 9,17 5,56 1,95 1,20 0,19
5910033
HNEC535ANSN Ceramic
HNEC535ANSN
Ceramic
P
M
K
N
S
H
XNGJ-LDJ3 Wiper
catalogue number
cutting
edges D L10 S BS R¡hm
TN6501
THM-U
XNGJ0905ANFNLDJ3W 3 16 9,60 5,51 6,00 1,60 0,02
3865375
3865358
NOTE: Inserts have 3 right-hand and 3 left-hand cutting edges.
rst choice
alternate choice
P
M
K
N
S
H
XNGJ-GD3 Wiper
catalogue number
cutting
edges D L10 S BS R¡hm
TN6520
TN6525
TN6540
TN7535
WK15CM
WP25PM
WS30PM
WP35CM
WP40PM
XNGJ0905ANSNGD3W 3 16 9,60 5,51 6,00 1,60 0,09
3524707
3523620
3066479
—
5622622
5895381
—
—
5895382
NOTE: Inserts have 3 right-hand and 3 left-hand cutting edges.
rst choice
alternate choice
XNGJ-GD3
Wiper
P
M
K
N
S
H
rst choice
alternate choice
Face Mills
WID_Master16_IndexableMilling_FaceMills_H034_H035_Metric_REBRAND.indd 35 10/29/15 2:00 PM
H36
LViWID M 16 I d bl Milli F Mill H036 H037 M i REBRANDO b 14 20159 26AM
widia.com
Face Mills • Victory™ M1200 Series
Recommended Starting Speeds
Recommended Starting Speeds [m/min]
Material
Group TN6520 TN6525 TN6540 TN7535 WK15CM WP25PM
P
1
–
–
– 410
320
280 360
280
240 545
475
445 –
–
– 395
340
325
2
–
–
– 320
250
215 250
190
170 335
305
275 –
–
– 330
290
240
3
–
–
– 280
215
185 215
170
140 305
275
245 –
–
– 305
260
210
4
–
–
– 235
170
145 180
130
110 230
210
190 –
–
– 270
220
180
5
–
–
– 310
235
200 240
180
150 310
275
250 –
–
– 220
205
180
6
–
–
– 205
160
130 160
120
100 190
160
130 –
–
– 200
150
120
M
1
–
–
– 190
120
80 130
80
60 245
220
185 –
–
– 245
215
200
2
–
–
– 120
80
50 80
50
40 220
190
170 –
–
– 220
190
155
3
–
–
– 125
80
55 85
50
40 175
155
140 –
–
– 170
145
115
K
1
450
320
230 275
245
220 220
205
180 355
320
290 505
460
410 275
245
220
2
390
250
190 215
190
180 175
155
140 280
250
230 400
355
330 215
190
180
3
300
230
160 180
160
145 155
145
125 235
210
190 335
300
275 180
160
145
N
1
–
–
––
–
––
–
––
–
––
–
––
–
–
2
–
–
––
–
––
–
––
–
––
–
––
–
–
3
–
–
––
–
––
–
––
–
––
–
––
–
–
S
1
–
–
––
–
–50
35
30 –
–
––
–
–50
40
30
2
–
–
––
–
–25
20
10 –
–
––
–
–50
40
30
3
–
–
––
–
–70
40
30 –
–
––
–
–60
50
30
4
–
–
––
–
–60
30
25 –
–
––
–
–85
60
40
H
1
–
–
––
–
––
–
––
–
––
–
– 145
110
85
2
–
–
––
–
––
–
––
–
––
–
––
–
–
3
–
–
––
–
––
–
––
–
––
–
––
–
–
Face Mills
(continued)
WID_Master16_IndexableMilling_FaceMills_H036_H037_Metric_REBRAND.indd 36 10/29/15 2:00 PM
H37
LViWID M 16 I d bl Milli F Mill H036 H037 M i REBRANDO b 1420159 26AM
widia.com
Face Mills • Victory™ M1200 Series
Recommended Starting Speeds
Face Mills
NOTE: FIRST choice starting speeds are in bold type.
As the average chip thickness increases, the speed should be decreased.
Material
Group WS30PM WP35CM WP40PM WK25YM TN6501 THM-U
P
1
–
–
– 545
475
445 355
310
295 –
–
––
–
––
–
–
2
–
–
– 335
305
275 300
260
215 –
–
––
–
––
–
–
3
–
–
– 305
275
245 275
235
190 –
–
––
–
––
–
–
4
–
–
– 230
210
190 245
205
160 –
–
––
–
––
–
–
5
–
–
– 310
275
250 205
185
160 –
–
––
–
––
–
–
6
–
–
– 190
160
130 180
140
110 –
–
––
–
––
–
–
M
1
270
240
220 245
220
185 235
205
185 –
–
––
–
––
–
–
2
245
215
175 220
190
170 210
180
150 –
–
––
–
––
–
–
3
185
160
125 175
155
140 155
140
110 –
–
––
–
––
–
–
K
1
–
–
– 355
320
290 –
–
– 965
880
780 –
–
––
–
–
2
–
–
– 280
250
230 –
–
– 765
685
635 –
–
––
–
–
3
–
–
– 235
210
190 –
–
– 645
570
525 –
–
––
–
–
N
1
–
–
––
–
––
–
––
–
– 2400
1440
1200 2400
1440
1200
2
–
–
––
–
––
–
––
–
– 1640
980
800 1640
980
800
3
–
–
––
–
––
–
––
–
– 960
600
480 960
600
480
S
1
55
50
35 –
–
–50
40
35 –
–
––
–
––
–
–
2
55
50
35 –
–
–50
40
35 –
–
––
–
––
–
–
3
65
55
35 –
–
–60
50
35 –
–
––
–
––
–
–
4
100
70
50 80
60
40 80
60
40 –
–
––
–
––
–
–
H
1
–
–
––
–
––
–
––
–
––
–
––
–
–
2
–
–
––
–
––
–
––
–
––
–
––
–
–
3
–
–
––
–
––
–
––
–
––
–
––
–
–
(Recommended Starting Speeds [m/min] — continued)
Recommended Starting Feeds [mm]
NOTE: Use “Light Machining” value as starting feed rate.
Light
Machining
General
Purpose
Heavy
Machining
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
.F..LDJ 0,17
0,33
0,66 0,12
0,24
0,47 0,09
0,18
0,35 0,08
0,15
0,31 0,07
0,14
0,28 .F..LDJ
.E..LD 0,17
0,49
0,99 0,12
0,35
0,71 0,09
0,27
0,53 0,08
0,23
0,46 0,07
0,21
0,42 .E..LD
.S..GD 0,26
0,84
1,35 0,19
0,60
0,97 0,14
0,45
0,72 0,12
0,39
0,63 0,11
0,36
0,57 .S..GD
.S..HD 0,33
0,84
1,35 0,24
0,60
0,97 0,18
0,45
0,72 0,16
0,39
0,63 0,14
0,36
0,57 .S..HD
.S..Ceramic 0,17
0,33
0,49 0,12
0,24
0,35 0,09
0,18
0,27 0,08
0,15
0,23 0,07
0,14
0,21 .S..Ceramic
Recommended Starting Feeds
WID_Master16_IndexableMilling_FaceMills_H036_H037_Metric_REBRAND.indd 37 10/29/15 2:00 PM
H38
LViWID M 16 I d bl Milli F Mill H038 H039 M i REBRANDO b 14 20159 27AM
widia.com
Face Mills • Victory™ M1200 Series
Victory M1200 HD • Shell Mills
D1
insert
screw Nm
Torx
driver
socket-head
cap screw
coolant
screw assembly
coolant
lock screw
coolant
cap
50 12146034500 3,5 12148082400 12146120500 — — —
63 12146034500 3,5 12148082400 12146120500 — — —
80 12146034500 3,5 12148082400 12748701000 — — —
100 12146034500 3,5 12148082400 — 12146109400 — —
125 12146034500 3,5 12148082400 — — 12146107000 12146111000
160 12146034500 3,5 12148082400 — — 12146107000 12146111100
Spare Parts
Shell Mills
order number catalogue number D1 D1 max D D4 D6 L Ap1 max Z max RPM
coolant
supply kg
4152113 M1200HD050Z04HN09 50 58,6 22 — 38 40 6,0 4 12700 Yes 0,29
4152114 M1200HD050Z05HN09 50 58,6 22 — 38 40 6,0 5 12700 Yes 0,28
4152115 M1200HD063Z04HN09 63 71,5 22 — 50 40 6,0 4 10100 Yes 0,54
4152116 M1200HD063Z06HN09 63 71,5 22 — 50 40 6,0 6 10100 Yes 0,55
4152117 M1200HD080Z05HN09 80 88,5 27 — 60 50 6,0 5 7900 Yes 1,05
4152118 M1200HD080Z08HN09 80 88,5 27 — 60 50 6,0 8 7900 Yes 1,10
4152119 M1200HD100Z06HN09 100 108,5 32 — 80 50 6,0 6 6300 Yes 1,61
4152120 M1200HD100Z08HN09 100 108,5 32 — 80 50 6,0 8 6300 Yes 1,63
4152121 M1200HD125Z08HN09 125 133,5 40 — 90 63 6,0 8 5050 Yes 2,88
4152122 M1200HD125Z10HN09 125 133,5 40 — 90 63 6,0 10 5050 Yes 2,85
4152123 M1200HD160Z09HN09 160 168,5 40 66,7 110 63 6,0 9 3900 Yes 4,62
4152124 M1200HD160Z12HN09 160 168,5 40 66,7 110 63 6,0 12 3900 Yes 4,75
Face Mills
• Twelve cutting edges.
• Higher Ap1 max with standard insert.
NOTE: Coolant screw assembly, coolant lock screw, and coolant cap must be ordered separately.
WID_Master16_IndexableMilling_FaceMills_H038_H039_Metric_REBRAND.indd 38 10/29/15 2:00 PM
H39
LViWID M 16 I d bl Milli F Mill H038 H039 M i REBRANDO b 1420159 27AM
widia.com
Face Mills • Victory™ M1200 Series
Inserts
Insert Selection Guide
Face Mills
Material
Group
Light
Machining
General
Purpose
Heavy
Machining
Geometry Grade Geometry Grade Geometry Grade
P1–P2
.E..LD WP40PM
.S..GD WP40PM
.S..HD WP40PM
P3–P4
.E..LD WP25PM
.S..GD WP35CM
.S..HD WP35CM
P5–P6
.E..LD WP25PM
.S..GD WP35CM
.S..HD WP35CM
M1–M2
.E..LD WP25PM
.S..GD WP25PM
.S..HD WP25PM
M3
.E..LD WP35CM
.S..GD WP35CM
.S..HD WP35CM
K1–K2
.E..LD TN6520
.S..GD WK15CM
.S..HD WK15CM
K3
.E..LD WP35CM
.S..GD WP35CM
.S..HD WP35CM
N1–N2
.F..LDJ TN6501
.F..LDJ TN6501
.F..LDJ TN6501
N3
.F..LDJ TN6501
.F..LDJ TN6501
.F..LDJ TN6501
S1–S2
.E..LD WS30PM
.S..GD WS30PM
.S..HD WP25PM
S3
.E..LD WS30PM
.S..GD WS30PM
.S..HD WP40PM
S4
.E..LD WS30PM
.S..GD WS30PM
.S..HD WP40PM
H1
––
––
––
HNGJ-LDJ
P
M
K
N
S
H
rst choice
alternate choice
P
M
K
N
S
H
HNGJ-LD
catalogue number
cutting
edges D L10 S BS R¡hm
TN6520
TN6525
TN6540
TN7535
WP25PM
WK15CM
WS30PM
WP35CM
WP40PM
HNGJ0905ANENLD 12 16 8,58 5,56 1,80 1,20 0,05
3093559
3330950
3030034
3030017
5895346
—
5528973
5895347
5895348
rst choice
alternate choice
HNGJ-LD
HNGJ-LDJ
catalogue number
cutting
edges D L10 S BS R¡hm
TN6501
THM-U
HNGJ0905ANFNLDJ 12 16 8,58 5,56 1,80 1,20 0,02
3865373
3606383
WID_Master16_IndexableMilling_FaceMills_H038_H039_Metric_REBRAND.indd 39 10/29/15 2:00 PM
H40
LViWID M 16 I d bl Milli F Mill H040 H041 M i REBRANDO b 14 20159 27AM
widia.com
Face Mills • Victory™ M1200 Series
Inserts
HNPJ-GD
catalogue number
cutting
edges D L10 S BS R¡hm
TN6520
TN6525
TN6540
TN7535
WP25PM
WK15CM
WS30PM
WP35CM
WP40PM
HNPJ0905ANSNGD 12 16 8,58 5,56 1,80 1,20 0,10
3761185
—
3761187
3761188
5895374
5427372
—
5895375
5550908
rst choice
alternate choice
HNPJ-GD
Face Mills
HNGJ-GD
catalogue number
cutting
edges D L10 S BS R¡hm
TN6520
TN6525
TN6540
TN7535
WP25PM
WK15CM
WS30PM
WP35CM
WP40PM
HNGJ0905ANSNGD 12 16 8,58 5,56 1,80 1,20 0,10
3119541
3614650
3037596
3093721
—
5427370
5528974
5895349
5895350
HNGJ-GD
HNPJ-HD
catalogue number
cutting
edges D L10 S BS R¡hm
TN6520
TN6525
TN6540
TN7535
WP25PM
WK15CM
WS30PM
WP35CM
WP40PM
HNPJ090543ANSNHD 12 16 8,50 5,44 — 4,34 0,13
3670866
—
3670865
—
5895378
—
—
5895379
5895380
HNPJ0905ANSNHD 12 16 8,59 5,46 1,66 1,20 0,18
3670864
—
3670842
—
5895376
5427371
—
5895377
5550909
HNPJ-HD
HNGJ-HD
catalogue number
cutting
edges D L10 S BS R¡hm
TN6520
TN6525
TN6540
TN7535
WP25PM
WK15CM
WS30PM
WP35CM
WP40PM
HNGJ090543ANSNHD 12 16 8,50 5,44 — 4,35 0,20
3564083
3564084
3564085
—
—
—
—
—
—
HNGJ0905ANSNHD 12 16 8,59 5,46 1,66 1,20 0,17
3563900
3563901
3563902
—
5895371
—
—
5895372
5895373
HNGJ-HD
P
M
K
N
S
H
WID_Master16_IndexableMilling_FaceMills_H040_H041_Metric_REBRAND.indd 40 10/29/15 2:00 PM
H41
LViWID M 16 I d bl Milli F Mill H040 H041 M i REBRANDO b 1420159 27AM
widia.com
Face Mills • Victory™ M1200 Series
Recommended Starting Speeds
Recommended Starting Speeds [m/min]
NOTE: FIRST choice starting speeds are in bold type.
As the average chip thickness increases, the speed should be decreased.
Material
Group WK15CM WS30PM WP35CM WP40PM TN6501 THM-U
P
1
–
–
––
–
– 545
475
445 355
310
295 –
–
––
–
–
2
–
–
––
–
– 335
305
275 300
260
215 –
–
––
–
–
3
–
–
––
–
– 305
275
245 275
235
190 –
–
––
–
–
4
–
–
––
–
– 230
210
190 245
205
160 –
–
––
–
–
5
–
–
––
–
– 310
275
250 205
185
160 –
–
––
–
–
6
–
–
––
–
– 190
160
130 180
140
110 –
–
––
–
–
M
1
–
–
– 270
240
220 245
220
185 235
205
185 –
–
––
–
–
2
–
–
– 245
215
175 220
190
170 210
180
150 –
–
––
–
–
3
–
–
– 185
160
125 175
155
140 155
140
110 –
–
––
–
–
K
1
505
460
410 –
–
– 355
320
290 –
–
––
–
––
–
–
2
400
355
330 –
–
– 280
250
230 –
–
––
–
––
–
–
3
335
300
275 –
–
– 235
210
190 –
–
––
–
––
–
–
N
1
–
–
––
–
––
–
––
–
– 2400
1440
1200 2400
1440
1200
2
–
–
––
–
––
–
––
–
– 1640
980
800 1640
980
800
3
–
–
––
–
––
–
––
–
– 960
600
480 960
600
480
S
1
–
–
–55
50
35 –
–
–50
40
35 –
–
––
–
–
2
–
–
–55
50
35 –
–
–50
40
35 –
–
––
–
–
3
–
–
–65
55
35 –
–
–60
50
35 –
–
––
–
–
4
–
–
– 100
70
50 80
60
40 80
60
40 –
–
––
–
–
H
1
–
–
––
–
––
–
––
–
––
–
––
–
–
2
–
–
––
–
––
–
––
–
––
–
––
–
–
3
–
–
––
–
––
–
––
–
––
–
––
–
–
Material
Group TN6501 TN6520 TN6525 TN6540 TN7535 WP25PM
P
1
–
–
––
–
– 410
320
280 360
280
240 545
475
445 1295
1120
1060
2
–
–
––
–
– 320
250
215 250
190
170 335
305
275 1080
940
785
3
–
–
––
–
– 280
215
185 215
170
140 305
275
245 1000
845
690
4
–
–
––
–
– 235
170
145 180
130
110 230
210
190 890
725
590
5
–
–
––
–
– 310
235
200 240
180
150 310
275
250 725
670
590
6
–
–
––
–
– 205
160
130 160
120
100 190
160
130 650
490
395
M
1
–
–
––
–
– 190
120
80 130
80
60 245
220
185 805
710
650
2
–
–
––
–
– 120
80
50 80
50
40 220
190
170 725
630
510
3
–
–
––
–
– 125
80
55 85
50
40 175
155
140 550
475
370
K
1
–
–
– 450
320
230 275
245
220 220
205
180 355
320
290 905
805
725
2
–
–
– 390
250
190 215
190
180 175
155
140 280
250
230 710
630
590
3
–
–
– 300
230
160 180
160
145 155
145
125 235
210
190 590
535
475
N
1
2400
1440
1200 –
–
––
–
––
–
––
–
––
–
–
2
1640
980
800 –
–
––
–
––
–
––
–
––
–
–
3
960
600
480 –
–
––
–
––
–
––
–
––
–
–
S
1
–
–
––
–
––
–
–50
35
30 –
–
– 155
140
95
2
–
–
––
–
––
–
–25
20
10 –
–
– 155
140
95
3
–
–
––
–
––
–
–70
40
30 –
–
– 200
155
95
4
–
–
––
–
––
–
–60
30
25 –
–
– 275
200
140
H
1
–
–
––
–
––
–
––
–
––
–
– 475
355
275
2
–
–
––
–
––
–
––
–
––
–
––
–
–
3
–
–
––
–
––
–
––
–
––
–
––
–
–
Face Mills
Recommended Starting Feeds [mm]
NOTE: Use “Light Machining” value as starting feed rate.
Light
Machining
General
Purpose
Heavy
Machining
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
.F..LDJ 0,13
0,27
0,54 0,10
0,19
0,39 0,07
0,14
0,29 0,06
0,13
0,25 0,06
0,12
0,23 .F..LDJ
.E..LD 0,13
0,40
0,81 0,10
0,29
0,58 0,07
0,22
0,43 0,06
0,19
0,38 0,06
0,17
0,35 .E..LD
.S..GD 0,21
0,68
1,10 0,15
0,49
0,79 0,12
0,37
0,59 0,10
0,32
0,51 0,09
0,29
0,47 .S..GD
.S..HD 0,27
0,68
1,10 0,20
0,49
0,79 0,15
0,37
0,59 0,13
0,32
0,51 0,12
0,29
0,47 .S..HD
Recommended Starting Feeds
WID_Master16_IndexableMilling_FaceMills_H040_H041_Metric_REBRAND.indd 41 10/29/15 2:00 PM
H42
LViWID M 16 I d bl Milli F Mill H042 H043 M i REBRANDN b 12 20158 16AM
widia.com
All pockets are machined into preheated material for excellent
runout and pocket strength.
Through tool coolant
up to 80mm diameter.
One screw enables fast,
accurate indexing.
Optimum tool body design
using latest technology.
M640
• Highly positive rake angle means extremely low cutting forces.
• Available in geometries and grades for all applications.
• Easy-to-use for fast, accurate indexing.
When Low Cutting Forces Are Required •
M640 Series
The M640 platform is the fi rst choice when high productivity, superior fi nish operations,
and soft cutting performance are a priority. With six effective cutting edges and a
streamlined body design, this easy-to-use tool is ideal, even for low-power machines.
WID_Master16_IndexableMilling_FaceMills_H042_H043_Metric_REBRAND.indd 42 11/12/15 8:56 AM
H43
LViWID M 16 I d bl Milli F Mill H042 H043 M i REBRANDN b 1220158 16AM
widia.com
Face Mills
M640
Max depth of cut: 4,8mm
Lead angle: 58°
Indexes per insert: 6
Diameter: 32–125mm
Pages: H44–H49
P
M
K
N
S
H
Insert Offering
Low cutting force wiper inserts:
Special wiper design for very soft
cutting in fi nishing operations with
high productivity.
Six effective cutting edges.
Highly positive rake:
• Extremely low cutting forces.
• For low-power machines, driven units,
and light fi xtures.
• Chipbreaker and grades for all applications.
• Through tool coolant up to 80mm diameter.
WID_Master16_IndexableMilling_FaceMills_H042_H043_Metric_REBRAND.indd 43 11/12/15 8:56 AM
H44
LViWID M 16 I d bl Milli F Mill H044 H045 M i REBRANDO b 14 20159 28AM
widia.com
Face Mills • M640 Series
Weldon® Shanks
D1
insert
screw Nm
Torx
driver
32 12148038800 4,0 12148000600
Spare Parts
Weldon Shanks
order number catalogue number D1 D1 max D L L2 Ap1 max Z max RPM
coolant
supply kg
2263165 12395405200 32 38,4 32 100 40 4,8 4 29500 Yes 0,35
• Six cutting edges.
• Highly positive rake for low-power machines
or light xtures.
• Geometries and grades for all applications.
Face Mills
WID_Master16_IndexableMilling_FaceMills_H044_H045_Metric_REBRAND.indd 44 10/29/15 2:00 PM
H45
LViWID M 16 I d bl Milli F Mill H044 H045 M i REBRANDO b 1420159 28AM
widia.com
Face Mills • M640 Series
Shell Mills
D1
insert
screw Nm
Torx
driver
50 12148038800 4,0 12148000600
63 12148038800 4,0 12148000600
80 12148038800 4,0 12148000600
100 12148038800 4,0 12148000600
125 12148038800 4,0 12148000600
Spare Parts
Shell Mills
order number catalogue number D1 D1 max D D6 L Ap1 max Z max RPM
coolant
supply kg
2263132 12395410200 50 56,4 22 47 40 4,8 4 19000 Yes 0,40
2263154 12395410400 63 69,4 22 50 40 4,8 5 15000 Yes 0,55
2263156 12395410600 80 86,4 27 60 50 4,8 6 11500 Yes 1,05
2263158 12395410800 100 106,4 32 78 50 4,8 7 9500 No 1,50
2263159 12395415800 100 106,4 32 78 50 4,8 10 9500 No 1,65
2263160 12395411000 125 131,4 40 89 63 4,8 8 7500 No 2,90
• Six cutting edges.
• Highly positive rake for low-power machines
or light xtures.
• Geometries and grades for all applications.
Face Mills
WID_Master16_IndexableMilling_FaceMills_H044_H045_Metric_REBRAND.indd 45 10/29/15 2:00 PM
H46
LViWID M 16 I d bl Milli F Mill H046 H047 M i REBRANDO b 14 20159 28AM
widia.com
Face Mills • M640 Series
Inserts
Insert Selection Guide
Material
Group
Light
Machining
General
Purpose
Heavy
Machining
Geometry Grade Geometry Grade Geometry Grade
P1–P2
.E..LD WP40PM
.E..GD WP40PM
.E..GD WP40PM
P3–P4
.E..LD WP25PM
.E..GD WP35CM
.E..GD WP35CM
P5–P6
.E..LD WP25PM
.E..GD WP35CM
.E..GD WP35CM
M1–M2
.E..LD WP25PM
.E..GD WP25PM
.E..GD WP25PM
M3
.E..LD WP40PM
.E..GD WP35CM
.E..GD WP35CM
K1–K2
.E..LD TN6510
.E..GD WK15CM
.E..GD WK15CM
K3
.E..LD TN6520
.E..GD WP35CM
.E..GD WP35CM
N1–N2
.F..LDAL TN6501
.F..LDAL TN6501
.F..LDAL TN6501
N3
.F..LDAL TN6501
.F..LDAL TN6501
.F..LDAL TN6501
S1–S2
.E..LD WP25PM
.E..GD WP25PM
.E..GD WP25PM
S3
.E..GD WS30PM
.E..GD WS30PM
.E..GD WP40PM
S4
.E..GD WS30PM
.E..GD WS30PM
.E..GD WP40PM
H1
.E..LD TN2510
.E..GD TN2510
––
P
M
K
N
S
H
HPGT-LDAL
catalogue number
cutting
edges D S R¡hm
TN6501
THM-U
THM
HPGT06T3DZFRLDAL 6 11 4,00 0,90 0,08
2957548
2288107
2288106
NOTE: Ap1 max = 3,2mm with this geometry.
rst choice
alternate choice
1
2
3
4
5
6
HPGT-LDAL
P
M
K
N
S
H
HPGT-LD
catalogue number
cutting
edges D S R¡hm
TN2510
TN6510
TN6520
TN6525
TN6540
TN7525
TN7535
WK15CM
WP25PM
WS30PM
WP35CM
WP40PM
HPGT06T3DZERLD 6 11 3,99 0,98 0,08
2288072
—
2957585
2957547
2957587
2288070
—
—
5895784
—
—
5895785
NOTE: Ap1 max = 3mm with this geometry.
rst choice
alternate choice
1
2
3
4
5
6
HPGT-LD
Face Mills
WID_Master16_IndexableMilling_FaceMills_H046_H047_Metric_REBRAND.indd 46 10/29/15 2:00 PM
H47
LViWID M 16 I d bl Milli F Mill H046 H047 M i REBRANDO b 1420159 28AM
widia.com
Face Mills • M640 Series
Inserts
HPPT-GD
catalogue number
cutting
edges D S R¡hm
TN2510
TN6510
TN6520
TN6525
TN6540
TN7525
TN7535
WK15CM
WP25PM
WS30PM
WP35CM
WP40PM
HPPT06T3DZENGD 6 11 3,97 0,98 0,10
—
—
2957583
2957586
2957552
2271760
2271759
—
5895788
—
5895790
5895789
rst choice
alternate choice
1
2
3
4
5
6
HPPT-GD
HPGT-GD
catalogue number
cutting
edges D S R¡hm
TN2510
TN6510
TN6520
TN6525
TN6540
TN7525
TN7535
WK15CM
WP25PM
WS30PM
WP35CM
WP40PM
HPGT06T3DZENGD 6 11 3,97 0,98 0,10
2288069
2957589
—
2957588
2957546
2288067
2288066
5427387
5895782
5528978
—
5895783
HPGT-GD Wiper
catalogue number
cutting
edges D S BS R¡hm
TN2510
TN6510
TN6520
TN6525
TN6540
TN7525
TN7535
WK15CM
WP25PM
WS30PM
WP35CM
WP40PM
HPGT06T3DZERGD3W 3 11 4,00 2,88 0,98 0,10
—
2957549
—
2957584
—
2288103
—
5427388
5895786
—
—
5895787
rst choice
alternate choice
1
3
2
HPGT-GD
Wiper
P
M
K
N
S
H
Face Mills
HPGT-GD
P
M
K
N
S
H
WID_Master16_IndexableMilling_FaceMills_H046_H047_Metric_REBRAND.indd 47 10/29/15 2:00 PM
H48
LViWID M 16 I d bl Milli F Mill H048 H049 M i REBRANDO b 14 20159 29AM
widia.com
Material
Group TN7535 WK15CM WP25PM WS30PM WP35CM WP40PM
P
1
545
475
445 –
–
– 395
340
325 –
–
– 545
475
445 355
310
295
2
335
305
275 –
–
– 330
290
240 –
–
– 335
305
275 300
260
215
3
305
275
245 –
–
– 305
260
210 –
–
– 305
275
245 275
235
190
4
230
210
190 –
–
– 270
220
180 –
–
– 230
210
190 245
205
160
5
310
275
250 –
–
– 220
205
180 –
–
– 310
275
250 205
185
160
6
190
160
130 –
–
– 200
150
120 –
–
– 190
160
130 180
140
110
M
1
245
220
185 –
–
– 245
215
200 270
240
220 245
220
185 235
205
185
2
220
190
170 –
–
– 220
190
155 245
215
175 220
190
170 210
180
150
3
175
155
140 –
–
– 170
145
115 185
160
125 175
155
140 155
140
110
K
1
355
320
290 505
460
410 275
245
220 –
–
– 355
320
290 –
–
–
2
280
250
230 400
355
330 215
190
180 –
–
– 280
250
230 –
–
–
3
235
210
190 335
300
275 180
160
145 –
–
– 235
210
190 –
–
–
N
1
–
–
––
–
––
–
––
–
––
–
––
–
–
2
–
–
––
–
––
–
––
–
––
–
––
–
–
3
–
–
––
–
––
–
––
–
––
–
––
–
–
S
1
–
–
––
–
–50
40
30 55
50
35 –
–
–50
40
35
2
–
–
––
–
–50
40
30 55
50
35 –
–
–50
40
35
3
–
–
––
–
–60
50
30 65
55
35 –
–
–60
50
35
4
–
–
––
–
–85
60
40 100
70
50 80
60
40 80
60
40
H
1
–
–
––
–
––
–
––
–
––
–
––
–
–
2
–
–
––
–
––
–
––
–
––
–
––
–
–
3
–
–
––
–
––
–
––
–
––
–
––
–
–
Material
Group TN2510 TN6510 TN6520 TN6525 TN6540 TN7525
P
1
660
580
540 –
–
––
–
– 410
320
280 360
280
240 410
310
280
2
410
370
330 –
–
––
–
– 320
250
215 250
190
170 310
250
215
3
370
330
305 –
–
––
–
– 280
215
185 215
170
140 280
215
185
4
275
260
230 –
–
––
–
– 235
170
145 180
130
110 235
170
145
5
330
300
275 –
–
––
–
– 310
235
200 240
180
150 310
235
200
6
230
205
175 –
–
––
–
– 205
160
130 160
120
100 205
160
130
M
1
270
240
210 –
–
––
–
– 190
120
80 130
80
60 245
220
185
2
245
210
190 –
–
––
–
– 120
80
50 80
50
40 220
190
170
3
190
175
150 –
–
––
–
– 125
80
55 85
50
40 175
155
140
K
1
420
360
300 480
350
260 450
320
230 275
245
220 220
205
180 380
280
240
2
360
300
250 420
280
205 390
250
190 215
190
180 175
155
140 325
240
200
3
300
250
200 335
260
200 300
230
160 180
160
145 155
145
125 240
200
170
N
1
–
–
––
–
––
–
––
–
––
–
––
–
–
2
–
–
––
–
––
–
––
–
––
–
––
–
–
3
–
–
––
–
––
–
––
–
––
–
––
–
–
S
1
–
–
––
–
––
–
––
–
–50
35
30 –
–
–
2
–
–
––
–
––
–
––
–
–25
20
10 –
–
–
3
–
–
––
–
––
–
––
–
–70
40
30 –
–
–
4
–
–
––
–
––
–
––
–
–60
30
25 –
–
–
H
1
145
110
70 –
–
––
–
––
–
––
–
––
–
–
2
145
110
70 –
–
––
–
––
–
––
–
––
–
–
3
115
80
45 –
–
––
–
––
–
––
–
––
–
–
Face Mills • M640 Series
Recommended Starting Speeds
Recommended Starting Speeds [m/min]
Face Mills
(continued)
WID_Master16_IndexableMilling_FaceMills_H048_H049_Metric_REBRAND.indd 48 10/29/15 2:00 PM
H49
LViWID M 16 I d bl Milli F Mill H048 H049 M i REBRANDO b 1420159 29AM
widia.com
Material
Group TN6501 THM-U THM
P
1
–
–
––
–
––
–
–
2
–
–
––
–
––
–
–
3
–
–
––
–
––
–
–
4
–
–
––
–
––
–
–
5
–
–
––
–
––
–
–
6
–
–
––
–
––
–
–
M
1
–
–
––
–
––
–
–
2
–
–
––
–
––
–
–
3
–
–
––
–
––
–
–
K
1
–
–
– 230
205
180 145
110
90
2
–
–
––
–
– 150
120
85
3
–
–
––
–
– 155
115
70
N
1
2400
1440
1200 2400
1440
1200 1080
720
600
2
1640
980
800 1640
980
800 820
560
460
3
960
600
480 960
600
480 540
335
240
S
1
–
–
––
–
––
–
–
2
–
–
––
–
––
–
–
3
–
–
––
–
––
–
–
4
–
–
––
–
––
–
–
H
1
–
–
––
–
––
–
–
2
–
–
––
–
––
–
–
3
–
–
––
–
––
–
–
Recommended Starting Feeds
Recommended Starting Feeds [mm]
NOTE: Use “Light Machining” value as starting feed rate.
Light
Machining
General
Purpose
Heavy
Machining
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
.F..LDAL 0,13
0,34
0,47 0,10
0,25
0,34 0,07
0,18
0,25 0,06
0,16
0,22 0,06
0,15
0,20 .F..LDAL
.E..LD 0,13
0,34
0,47 0,10
0,25
0,34 0,07
0,18
0,25 0,06
0,16
0,22 0,06
0,15
0,20 .E..LD
.E..GD 0,13
0,48
0,54 0,10
0,35
0,39 0,07
0,26
0,29 0,06
0,23
0,25 0,06
0,21
0,23 .E..GD
Face Mills • M640 Series
Recommended Starting Speeds
NOTE: FIRST choice starting speeds are in bold type.
As the average chip thickness increases, the speed should be decreased.
Face Mills
(Recommended Starting Speeds [m/min] — continued)
WID_Master16_IndexableMilling_FaceMills_H048_H049_Metric_REBRAND.indd 49 10/29/15 2:00 PM
H50
LViWID M 16 I d bl Milli F Mill H050 H051 M i REBRANDN b 20 20157 05AM
widia.com
Strong tool body design for high
Metal Removal Rates (MRR).
Large chip gash
for excellent chip
evacuation.
Low axial and
radial runout.
Easy-to-use, safe clamping:
One insert screw enables
fast, accurate indexing.
M660
• Three tailor-made chipbreakers with large
chip gash ensures excellent chip evacuation.
• Easy, safe, and stable clamping ensures
accurate indexing.
• Thick inserts for reliability and high
MRR capability.
The M660 Series heavy-duty face milling platform, with its strong tool body design
and perfect axial and radial runout, is the ultimate high-performance booster
in the heavy machining of steel and cast iron.
The Ideal Heavy-Duty Face Milling Platform •
M660 Series
WID_Master16_IndexableMilling_FaceMills_H050_H051_Metric_REBRAND.indd 50 11/20/15 7:05 AM
H51
LViWID M 16 I d bl Milli F Mill H050 H051 M i REBRANDN b 2020157 05AM
widia.com
Face Mills M660 SN1205..
Max depth of cut: 6,4mm
Lead angle: 45°
Indexes per insert: 4
Diameter: 20–160mm
Pages: H52–H57
P
M
K
N
S
H
P
M
K
M660 SN1505..
Max depth of cut: 8,4mm
Lead angle: 45°
Indexes per insert: 4
Diameter: 100mm
Pages: H58–H60
Three tailor-made chipbreakers (-20, -21, -31)
for all heavy-duty applications in steel and
cast iron.
Positive rake angle:
• Soft cutting action.
• Less spindle power requirement.
• Less chipping on workpiece in
cast iron.
• Less burs on workpiece in steel.
• High feed rate capability.
Integrated wiper facet: Good surface fi nish
in heavy roughing applications.
Thick inserts for reliability and high MRR capability.
Insert Offering
WID_Master16_IndexableMilling_FaceMills_H050_H051_Metric_REBRAND.indd 51 11/20/15 7:05 AM
H52
LViWID M 16 I d bl Milli F Mill H052 H053 M i REBRANDO b 14 20159 29AM
widia.com
Face Mills • M660 Series
Weldon® Shanks • SN1205..
D1
insert
screw Nm
Torx
driver
20 12148007200 3,5 12148007500
25 12148007200 3,5 12148007500
Spare Parts
Weldon Shanks
order number catalogue number D1 D1 max D L L2 Ap1 max Z max RPM
coolant
supply kg
2002367 12396202200 20 33,8 25 86 30 6,4 2 17000 Yes 0,30
2002370 12396202600 25 38,7 25 91 35 6,4 2 15000 Yes 0,35
D
L
L2
D1
D1 max
Ap1 max
• Four cutting edges.
• Strong tool body design.
• Excellent chip evacuation.
Face Mills
WID_Master16_IndexableMilling_FaceMills_H052_H053_Metric_REBRAND.indd 52 10/29/15 2:00 PM
H53
LViWID M 16 I d bl Milli F Mill H052 H053 M i REBRANDO b 1420159 29AM
widia.com
Face Mills • M660 Series
Shell Mills • SN1205..
D1
insert
screw Nm
Torx
driver
50 12148007200 3,5 12148007500
63 12148007200 3,5 12148007500
80 12148007200 3,5 12148007500
100 12148007200 3,5 12148007500
125 12148007200 3,5 12148007500
160 12148007200 3,5 12148007500
Spare Parts
Shell Mills
order number catalogue number D1 D1 max D D4 D6 L Ap1 max Z max RPM
coolant
supply kg
2003541 12396203800 50 63,5 22 — 50 40 6,4 4 12500 Yes 0,45
2003558 12396204200 63 76,5 22 — 50 40 6,4 5 11000 Yes 0,60
2003575 12396204600 80 94,3 27 — 60 50 6,4 6 9900 Yes 1,15
2003582 12396205000 100 113,4 32 — 78 50 6,4 7 8900 No 1,60
2003679 12396205400 125 138,3 40 — 89 63 6,4 8 7900 No 2,80
2003780 12396205800 160 173,3 40 66,7 90 63 6,4 10 7000 No 4,10
• Four cutting edges.
• Strong tool body design.
• Excellent chip evacuation.
Face Mills
WID_Master16_IndexableMilling_FaceMills_H052_H053_Metric_REBRAND.indd 53 10/29/15 2:00 PM
H54
LViWID M 16 I d bl Milli F Mill H054 H055 M i REBRANDO b 14 20159 29AM
widia.com
Face Mills • M660 Series
Inserts
Insert Selection Guide
Material
Group
Light
Machining
General
Purpose
Heavy
Machining
Geometry Grade Geometry Grade Geometry Grade
P1–P2
…20 TN6540
…31 WP40PM
…31 WP40PM
P3–P4
…20 TN7535
…31 WP35CM
…31 WP35CM
P5–P6
…20 TN7535
…31 WP35CM
…31 WP35CM
M1–M2
…20 TN6540
…31 WP25PM
…31 WP25PM
M3
...20 TN7535
…31 WP35CM
…31 WP35CM
K1–K2
...21 WK15CM
…31 WK15CM
…31 WK15CM
K3
...21 WK15CM
…31 WP35CM
…31 WP35CM
N1–N2
––
––
––
N3
––
––
––
S1–S2
...20 TN6540
…31 WP25PM
…31 WP25PM
S3
––
––
––
S4
...20 TN6540
…31 WP40PM
…31 WP40PM
H1
––
––
––
rst choice
alternate choice
SNKT-20
SNKT-20
catalogue number
cutting
edges D L10 S BS hm
TN6540
TN7525
TN7535
WK15CM
WP40PM
TTI25
THM
SNKT1205AZER20 4 12,70 12,70 5,51 2,00 0,10
2964201
2022370
2020691
–
–
2022371
–
SNKT-21
catalogue number
cutting
edges D L10 S BS hm
TN6540
TN7525
TN7535
WK15CM
WP40PM
TTI25
THM
SNKT1205AZR21 4 12,70 12,70 5,56 1,54 0,15
–
2022373
–
5427383
–
2022374
2022375
Inserts • SN1205..
Face Mills
SNKT-21
P
M
K
N
S
H
WID_Master16_IndexableMilling_FaceMills_H054_H055_Metric_REBRAND.indd 54 10/29/15 2:00 PM
H55
LViWID M 16 I d bl Milli F Mill H054 H055 M i REBRANDO b 1420159 29AM
widia.com
Face Mills • M660 Series
Inserts • SN1205..
SNMT-31
catalogue number
cutting
edges D L10 S BS hm
TN6525
TN6540
TN7525
TN7535
WK15CM
WP25PM
WP35CM
WP40PM
TTI25
THM
SNMT1205AZR31 4 12,70 12,70 5,56 1,54 0,16
2964206
2964204
2020673
2020663
5427382
5895536
5895537
5551088
–
–
Face Mills
catalogue number
cutting
edges D L10 S BS hm
TN6525
TN6540
TN7525
TN7535
WK15CM
WP40PM
TTI25
THM
SNKT1205AZR31 4 12,70 12,70 5,56 1,54 0,16
2964208
2964205
2020683
2020677
5427384
–
–
–
XNKT-12 Wiper
rst choice
alternate choice
XNKT-12 Wiper
XNKT-11 Wiper
catalogue number
cutting
edges D L10 S BS hm
TN6540
TN7525
TN7535
WK15CM
WP40PM
TTI25
THM
XNKT1205AZER11 1 12,70 12,70 5,15 8,00 0,04
–
2015242
–
5427381
–
2015244
2015246
SNKT-31
P
M
K
N
S
H
SNKT-31
rst choice
alternate choice
P
M
K
N
S
H
XNKT-11 Wiper
catalogue number
cutting
edges D L10 S BS hm
TN6540
TN7525
TN7535
WK15CM
WP40PM
TTI25
THM
XNKT1205AZTR12 1 12,70 12,70 5,15 8,00 0,04
–
2015264
–
–
–
2015266
–
P
M
K
N
S
H
rst choice
alternate choice
SNMT-31
WID_Master16_IndexableMilling_FaceMills_H054_H055_Metric_REBRAND.indd 55 10/29/15 2:00 PM
H56
LViWID M 16 I d bl Milli F Mill H056 H057 M i REBRANDO b 14 20159 30AM
widia.com
Material
Group TN6525 TN6540 TN7525 TN7535
P
1
410
320
280 360
280
240 410
310
280 545
475
445
2
320
250
215 250
190
170 310
250
215 335
305
275
3
280
215
185 215
170
140 280
215
185 305
275
245
4
235
170
145 180
130
110 235
170
145 230
210
190
5
310
235
200 240
180
150 310
235
200 310
275
250
6
205
160
130 160
120
100 205
160
130 190
160
130
M
1
190
120
80 130
80
60 245
220
185 245
220
185
2
120
80
50 80
50
40 220
190
170 220
190
170
3
125
80
55 85
50
40 175
155
140 175
155
140
K
1
275
245
220 220
205
180 380
280
240 355
320
290
2
215
190
180 175
155
140 325
240
200 280
250
230
3
180
160
145 155
145
125 240
200
170 235
210
190
N
1
–
–
––
–
––
–
––
–
–
2
–
–
––
–
––
–
––
–
–
3
–
–
––
–
––
–
––
–
–
S
1
–
–
–50
35
30 –
–
––
–
–
2
–
–
–25
20
10 –
–
––
–
–
3
–
–
–70
40
30 –
–
––
–
–
4
–
–
–60
30
25 –
–
––
–
–
H
1
–
–
––
–
––
–
––
–
–
2
–
–
––
–
––
–
––
–
–
3
–
–
––
–
––
–
––
–
–
Recommended Starting Speeds [m/min]
Face Mills • M660 Series
Recommended Starting Speeds
Face Mills
(continued)
WID_Master16_IndexableMilling_FaceMills_H056_H057_Metric_REBRAND.indd 56 10/29/15 2:00 PM
H57
LViWID M 16 I d bl Milli F Mill H056 H057 M i REBRANDO b 1420159 30AM
widia.com
Material
Group WK15CM WP40PM TTI25 THM
P
1
–
–
– 355
310
295 430
360
300 –
–
–
2
–
–
– 300
260
215 310
250
215 –
–
–
3
–
–
– 275
235
190 310
250
215 –
–
–
4
–
–
– 245
205
160 265
215
180 –
–
–
5
–
–
– 205
185
160 320
235
200 –
–
–
6
–
–
– 180
140
110 145
110
90 –
–
–
M
1
–
–
– 235
205
185 480
310
215 –
–
–
2
–
–
– 210
180
150 325
205
145 –
–
–
3
–
–
– 155
140
110 320
210
145 –
–
–
K
1
505
460
410 –
–
– 220
185
155 145
110
90
2
400
355
330 –
–
– 180
145
125 150
120
85
3
335
300
275 –
–
– 145
125
100 155
115
70
N
1
–
–
––
–
––
–
– 1080
720
600
2
–
–
––
–
––
–
– 820
560
460
3
–
–
––
–
––
–
– 540
335
240
S
1
–
–
–50
40
35 –
–
––
–
–
2
–
–
–50
40
35 –
–
––
–
–
3
–
–
–60
50
35 –
–
––
–
–
4
–
–
–80
60
40 –
–
––
–
–
H
1
–
–
––
–
––
–
––
–
–
2
–
–
––
–
––
–
––
–
–
3
–
–
––
–
––
–
––
–
–
NOTE: FIRST choice starting speeds are in bold type.
As the average chip thickness increases, the speed should be decreased.
Recommended Starting Feeds [mm]
NOTE: Use “Light Machining” value as starting feed rate.
Light
Machining
General
Purpose
Heavy
Machining
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
...20 0,17
0,66
1,19 0,12
0,47
0,86 0,09
0,35
0,64 0,08
0,31
0,56 0,07
0,28
0,51 ...20
…21 0,24
0,74
1,25 0,18
0,53
0,89 0,13
0,40
0,66 0,12
0,35
0,58 0,11
0,32
0,53 …21
…31 0,26
0,76
1,28 0,19
0,55
0,91 0,14
0,41
0,68 0,12
0,36
0,59 0,11
0,33
0,54 …31
Face Mills • M660 Series
Recommended Starting Speeds
Face Mills
(Recommended Starting Speeds [m/min] — continued)
Recommended Starting Feeds
WID_Master16_IndexableMilling_FaceMills_H056_H057_Metric_REBRAND.indd 57 10/29/15 2:00 PM
H58
LViWID M 16 I d bl Milli F Mill H058 H059 M i REBRANDO b 14 20159 30AM
widia.com
Face Mills • M660 Series
Shell Mills • SN1505..
D1
insert
screw Nm
Torx
driver
100 12148007200 3,5 12148007500
Spare Parts
Shell Mills
order number catalogue number D1 D1 max D D6 L Ap1 max Z max RPM
coolant
supply kg
2003593 12396215000 100 116,9 32 78 50 8,0 7 8900 No 1,60
• Four cutting edges.
• Strong tool body design.
• Thick inserts for reliability.
Face Mills
WID_Master16_IndexableMilling_FaceMills_H058_H059_Metric_REBRAND.indd 58 10/29/15 2:00 PM
H59
LViWID M 16 I d bl Milli F Mill H058 H059 M i REBRANDO b 1420159 30AM
widia.com
Face Mills • M660 Series
Inserts
Insert Selection Guide
Material
Group
Light
Machining
General
Purpose
Heavy
Machining
Geometry Grade Geometry Grade Geometry Grade
P1–P2
...31 WP40PM
...31 WP40PM
...31 WP40PM
P3–P4
...31 WP25PM
...31 WP35CM
...31 WP35CM
P5–P6
...31 WP25PM
...31 WP35CM
...31 WP35CM
M1–M2
...31 WP25PM
...31 WP25PM
...31 WP25PM
M3
...31 WP35CM
...31 WP35CM
...31 WP35CM
K1–K2
...31 WK15CM
...31 WK15CM
...31 WK15CM
K3
...31 WK15CM
...31 WK35CM
...31 WK15CM
N1–N2
––
––
––
N3
––
––
––
S1–S2
...31 WP25PM
...31 WP25PM
...31 WP25PM
S3
––
––
––
S4
...31 WP40PM
...31 WP40PM
...31 WP40PM
H1
––
––
––
SNKT-31
catalogue number
cutting
edges D L10 S BS hm
TN7525
TN7535
WK15CM
WP25PM
WP35CM
WP40PM
SNKT1505AZR31 4 16 15,88 5,56 2,00 0,16
2020711
2020705
5427385
5895538
5895539
5895540
SNMT-31
catalogue number
cutting
edges D L10 S BS hm
TN7525
TN7535
WK15CM
SNMT1505AZR31 4 16 15,88 5,56 2,00 0,16
2020701
2020695
5427386
Inserts • SN1505..
rst choice
alternate choice
SNMT-31
Face Mills
P
M
K
N
S
H
SNKT-31
rst choice
alternate choice
P
M
K
N
S
H
WID_Master16_IndexableMilling_FaceMills_H058_H059_Metric_REBRAND.indd 59 10/29/15 2:00 PM
widia.com
H60
LViWID M 16 I d bl Milli F Mill H060 H061 M i REBRANDN b 11 20158 31AM
Face Mills • M660 Series
Recommended Starting Speeds
NOTE: Use “Light Machining” value as starting feed rate.
Light
Machining
General
Purpose
Heavy
Machining
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
...21 0,24
0,74
1,25 0,18
0,53
0,89 0,13
0,40
0,66 0,12
0,35
0,58 0,11
0,32
0,53 ...21
...31 0,33
0,84
1,35 0,24
0,60
0,97 0,18
0,45
0,72 0,16
0,39
0,63 0,14
0,36
0,57 ...31
Recommended Starting Feeds [mm]
Recommended Starting Feeds
Face Mills
Recommended Starting Speeds [m/min]
Material
Group TN6525 TN7525 TN7535 WK15CM WP25PM WP35CM WP40PM
P
1
410
320
280 410
310
280 545
475
445 –
–
– 395
340
325 545
475
445 355
310
295
2
320
250
215 310
250
215 335
305
275 –
–
– 330
290
240 335
305
275 300
260
215
3
280
215
185 280
215
185 305
275
245 –
–
– 305
260
210 305
275
245 275
235
190
4
235
170
145 235
170
145 230
210
190 –
–
– 270
220
180 230
210
190 245
205
160
5
310
235
200 310
235
200 310
275
250 –
–
– 220
205
180 310
275
250 205
185
160
6
205
160
130 205
160
130 190
160
130 –
–
– 200
150
120 190
160
130 180
140
110
M
1
190
120
80 245
220
185 245
220
185 –
–
– 245
215
200 245
220
185 235
205
185
2
120
80
50 220
190
170 220
190
170 –
–
– 220
190
155 220
190
170 210
180
150
3
125
80
55 175
155
140 175
155
140 –
–
– 170
145
115 175
155
140 155
140
110
K
1
275
245
220 380
280
240 355
320
290 505
460
410 275
245
220 355
320
290 –
–
–
2
215
190
180 325
240
200 280
250
230 400
355
330 215
190
180 280
250
230 –
–
–
3
180
160
145 240
200
170 235
210
190 335
300
275 180
160
145 235
210
190 –
–
–
N
1
–
–
––
–
––
–
––
–
––
–
––
–
––
–
–
2
–
–
––
–
––
–
––
–
––
–
––
–
––
–
–
3
–
–
––
–
––
–
––
–
––
–
––
–
––
–
–
S
1
–
–
––
–
––
–
––
–
–50
40
30 –
–
–50
40
35
2
–
–
––
–
––
–
––
–
–50
40
30 –
–
–50
40
35
3
–
–
––
–
––
–
––
–
–60
50
30 –
–
–60
50
35
4
–
–
––
–
––
–
––
–
–85
60
40 80
60
40 80
60
40
H
1
–
–
––
–
––
–
––
–
––
–
––
–
––
–
–
2
–
–
––
–
––
–
––
–
––
–
––
–
––
–
–
3
–
–
––
–
––
–
––
–
––
–
––
–
––
–
–
NOTE: FIRST choice starting speeds are in bold type.
As the average chip thickness increases, the speed should be decreased.
WID_Master16_IndexableMilling_FaceMills_H060_H061_Metric_REBRAND.indd 60 11/11/15 9:32 AM
LViWID M 16 I d bl Milli F Mill H060 H061 M i REBRANDN b 1120158 31AM
ADVISE
Uses a rules-based approach to provide cutting tool recommendations:
• Defi ne Machining Feature (face milling, slotting, blind hole, etc.)
• Apply Constraint Requirements (geometric, material, tolerance, etc.)
• Set Machining Sequence (single or multi-step operations, rough then
fi n i s h , e t c . )
• Receive Ranked Results
SELECT
A method of selecting cutting tools from a tree structure via a hierarchy
or parametric search:
• If you know which product you are looking for, a quick search can be
performed by just the catalogue number or product description.
• Smart fi lters signifi cantly reduce the amount of potential tooling
solutions.
• After the tool is selected, NOVO also provides cutting and adaptive
item options that fi t with your solution.
NOVO can ensure you have the right tools on your machines, in the right
sequence. Resulting in fl awless execution that accelerates every job,
and maximises every shift. widia.com/novo
NOVO KNOWS SEARCH
Searching for a tool by using the outdated method of a
catalogue has been replaced with the Advise and Select
functions from NOVO™ — saving you time and money.
WID_Master16_IndexableMilling_FaceMills_H060_H061_Metric_REBRAND.indd 61 11/11/15 9:32 AM
H62
LViWID M 16 I d bl Milli F Mill H062 H063 M i REBRANDN b 12 20158 19AM
widia.com
Features Benefi ts
• Anodised aluminium cutter bodies. •Durable and lightweight.
•Easy axial adjustment range 0,3–0,8mm. • Simple and very user-friendly.
•DovLok
™
PCD cartridge design. • Proven in demanding automotive
applications.
•Fine pitch cutters. • Shorter cycle times, higher MRR
and productivity.
• Durable cutter body protection.
• Five PCD cartridge options for increased fl exibility.
• User-friendly axial adjustment 0,3–0,8mm.
• Reduce overall tooling costs with reconditioning options.
SuperFeed
Our unique insert design delivers exceptional stability and performance. Reduced complexity with
exceptional fi nishing capabilities make SuperFeed the go-to platform in aluminium and non-ferrous
face and end milling applications.
Indexable Milling •
SuperFeed™
The new SuperFeed face mills and end mills are the fi rst
choice platform for machining aluminium in the transportation
and general engineering industries.
WID_Master16_IndexableMilling_FaceMills_H062_H063_Metric_REBRAND.indd 62 11/12/15 8:56 AM
H63
LViWID M 16 I d bl Milli F Mill H062 H063 M i REBRANDN b 1220158 19AM
widia.com
Face Mills
Insert Offering
N
SuperFeed™
Max depth of cut: 6,35mm
(can be less depending
on the cartridge)
Pages: H64–H68
SDR/EDR
Lead angle: 90°
Indexes per insert:
1 edge per PCD cartridge
Diameter: Standard Platform
63–200mm
Corner Radii:
SDR — 0,8mm and 2,36mm
EDR — 0,8mm
WIDIA™ Grade WDN00U™:
• Ultra fi ne grain PCD.
• Long tool life, consistent results,
excellent surface qualities.
Axial DOC:
SDR — 6,35mm max
EDR — 6,35mm max
WID_Master16_IndexableMilling_FaceMills_H062_H063_Metric_REBRAND.indd 63 11/12/15 8:56 AM
H64
LViWID M 16 I d bl Milli F Mill H064 H065 M i REBRANDO b 14 20159 31AM
widia.com
• Through coolant capability.
• +/- 3 micron axial adjustment range.
• Balanced design.
• Easy setup in a simple system design.
• Modied standards available.
Spare Parts
D1
wedge
screw
wrench size
wedge screw
adjusting
screw
wrench size-
adjusting screw
coolant
cap
coolant
shower plate wedge
63 LS103 3 mm SWSM515 4 mm SALS063 — HDWM5EU4DD
80 LS103 3 mm SWSM515 4 mm SALS080 — HDWM5EU4DD
100 LS103 3 mm SWSM515 4 mm SALS100 — HDWM5EU4DD
125 LS103 3 mm SWSM515 4 mm SALS125 — HDWM5EU4DD
160 LS103 3 mm SWSM515 4 mm SALS160 — HDWM5EU4DD
200 LS103 3 mm SWSM515 4 mm — SSP8 HDWM5EU4DD
Face Mills • Metric
order number catalogue number D1 D D4 D6 L Ap1 max Z Z ADJ kg max RPM
5363208 SF06306RH 63 22 — 60 40 6 6 6 0,45 20000
5363209 SF08008RH 80 27 — 77 50 6 8 8 0,63 20000
5363220 SF10012RH 100 32 — 97 50 6 12 12 1,13 17320
5363221 SF12515RH 125 40 — 122 63 6 15 15 2,30 15500
5363222 SF16018RH 160 40 — 157 63 6 18 18 3,20 14150
5363223 SF20024RH 200 60 102 197 63 6 24 24 4,21 12240
NOTE: Z = Number of cartridges.
Z ADJ = Number of adjustable cartridges.
NOTE: Coolant cap or coolant shower plate must be ordered separately.
Face Mills • SuperFeed™ Series
Tool Bodies • Face Mills
Face Mills
WID_Master16_IndexableMilling_FaceMills_H064_H065_Metric_REBRAND.indd 64 10/29/15 2:00 PM
H65
LViWID M 16 I d bl Milli F Mill H064 H065 M i REBRANDO b 1420159 31AM
widia.com
Face Mills • SuperFeed™ Series
Tool Bodies • End Mills
Spare Parts
D1
wedge
screw
wrench size
wedge screw wedge
adjusting
screw
wrench size-
adjusting screw
25 DSM550 3 mm HDWM5S SWSM5155 4 mm
32 DSM550 3 mm HDWM5S SWSM5155 4 mm
40 DSM550 3 mm HDWM5S SWSM5155 4 mm
50 DSM550 3 mm HDWM5S SWSM5155 4 mm
End Mills • Metric
order number catalogue number D1 D L2 L Ap1 max Z Z ADJ kg max RPM
5363252 WSSEM02502RH 25 20 40 100 6,4 2 2 0,22 35800
5363253 WSSEM03203RH 32 32 42 100 6,4 3 3 0,54 31600
5363254 WSSEM04004RH 40 32 42 100 6,4 4 4 0,49 28300
5363255 WSSEM05005RH 50 32 42 100 6,4 5 5 0,79 25300
NOTE: Z = Number of cartridges.
Z ADJ = Number of adjustable cartridges.
• Through coolant capability.
• +/- 3 micron axial adjustment range.
• Easy setup in a simple system design.
• Modied standards available.
Face Mills
NOTE: For setting procedure, see page H68.
WID_Master16_IndexableMilling_FaceMills_H064_H065_Metric_REBRAND.indd 65 10/29/15 2:00 PM
H66
LViWID M 16 I d bl Milli F Mill H066 H067 M i REBRANDO b 14 20159 32AM
widia.com
P
M
K
N
S
H
Insert Selection Guide
Material
Group
Light
Machining
General
Purpose
Heavy
Machining
Geometry Grade Geometry Grade Geometry Grade
P1–P2 ––––––
P3–P4 ––––––
P5–P6 ––––––
M1–M2 ––––––
M3 ––––––
K1–K2 ––––––
K3 ––––––
N1–N2 SDR…/EDR… WDN00U SDR…/EDR… WDN00U SDR…/EDR… WDN00U
N3 SDR…/EDR… WDN00U SDR…/EDR… WDN00U SDR…/EDR… WDN00U
S1–S2 ––––––
S3 ––––––
S4 ––––––
H1 ––––––
rst choice
alternate choice
PCD Inserts • Face Mills • SDR
catalogue number
cutting
edges L1 BS W R¡hm
WDN00U
SDR100031E0NW 1 22,23 — 9,53 0,79 0,02
5358450
SDR100031E0W4 1 22,23 1,52 9,53 0,79 0,02
5358407
SDR100031E1W4 1 22,23 1,52 9,53 0,79 0,02
5358408
SDR100093E1W4 1 22,23 1,52 9,53 2,36 0,02
5358409
SDR102 1 22,22 — 9,52 3,17 0,02
5358451
PCD Inserts • End Mills • EDR
catalogue number
cutting
edges L1 BS W R¡hm
WDN00U
EDR100031E1W4 1 22,23 1,52 6,36 0,79 0,02
5358452
NOTE: hm = Average chip thickness; BS = Wiper facet length; E0 = 2,5 ap1 max; E1 = 6,3 ap1 max.
Face Mills • SuperFeed™ Series
Inserts
Face Mills
WID_Master16_IndexableMilling_FaceMills_H066_H067_Metric_REBRAND.indd 66 10/29/15 2:00 PM
H67
LViWID M 16 I d bl Milli F Mill H066 H067 M i REBRANDO b 1420159 32AM
widia.com
Recommended Starting Speeds [m/min]
Material
Group WDN00U
P
1
–
–
–
2
–
–
–
3
–
–
–
4
–
–
–
5
–
–
–
6
–
–
–
M
1
–
–
–
2
–
–
–
3
–
–
–
K
1
–
–
–
2
–
–
–
3
–
–
–
N1–2
910
1980
4880
3
460
610
760
S
1
–
–
–
2
–
–
–
3
–
–
–
4
–
–
–
H1
–
–
–
Face Mills • SuperFeed™ Series
Recommended Starting Speeds
Recommended Starting Feeds [mm]
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry10% 20% 30% 40% 50–100%
SDR… 0,08
0,17
0,33 0,06
0,13
0,25 0,06
0,11
0,22 0,05
0,10
0,20 0,05
0,10
0,20 SDR…
EDR… 0,08
0,17
0,33 0,06
0,13
0,25 0,06
0,11
0,22 0,05
0,10
0,20 0,05
0,10
0,20 EDR…
Recommended Starting Feeds
Light
Machining
General
Purpose
Heavy
Machining
NOTE: First choice starting feed (fz) is in bold type.
Use corresponding speed (vc).
fz and vc are valid for ae *0,4 D1.
For smaller ae, fz and vc should be multiplied by the factor given below:
ae/D1 = 0,2 0,3 0,4
fz-Factor 1,5 1,3 1,0
vc-Factor 1,3 1,2 1,1
Face Mills
WID_Master16_IndexableMilling_FaceMills_H066_H067_Metric_REBRAND.indd 67 10/29/15 2:01 PM
widia.com
H68
LViWID M 16 I d bl Milli F Mill H068 H069 M i REBRANDN b 10 20152 45PM
Face Mills • SuperFeed™ Series
Insert Setting and Fine Adjustment Procedure
General
Face Mills
End Mills
• Non-contact gages are preferred.
• Contact gages can be used with the following precautions:
— Indicator must be at and parallel to the base.
— Always approach the PCD cartridge from the relief angle under the PCD segment.
— Do NOT let the indicator drop on the PCD segment.
• Remove all worn PCD cartridges.
• Clean the pockets of the cutter completely.
• Apply a small amount of lubricant to the following areas:
— Pocket area where the wedge slides.
— Threads of the cartridge locking screw.
— Threads of the axial adjustment screw.
• Install cartridges applying light torque to the wedge assembly locking screw.
• Turn axial adjustment screw until the cartridge is 0,01–0,015mm below the nal set height.
• Tighten the wedge assembly locking screw to 4 Nm.
• Turn the axial adjustment screw moving the PCD cartridge 0,005mm to the nal set height position.
• Set all cartridges as above.
• Apply a small amount of lubricant to the following areas:
— Threads of the cartridge locking screw.
— Threads of the axial adjustment screw.
• Install cartridges applying light torque to the locking screws.
• Turn axial adjustment screw until the cartridge is 0,01–0,015mm below the nal set height.
• Tighten the locking screw (left-hand threads) to 8 Nm leaving 0,005mm below the nal set height.
• Turn the axial adjustment screw moving the PCD cartridge 0,005mm to the nal set height position.
• Set all cartridges as above.
Face Mills
WID_Master16_IndexableMilling_FaceMills_H068_H069_Metric_REBRAND.indd 68 11/11/15 9:32 AM
Our new Victory Milling Grades are designed to deliver higher productivity,
longer tool life, and increased application versatility.
• WP40PM™ — New best-in-class Victory milling grade for machining
steel materials in ISO material group P40 in rough milling applications.
• WK15CM™ — New milling grade for cast irons for higher tool life and
increased productivity.
• WS30PM™ — A new high-performance milling grade for machining
titanium and stainless steels.
Victory™ Milling Grades
To learn more about the benefi ts of the new WIDIA™ Victory milling grades,
contact your local distributor.
Making the
Grade in
Innovative
Metalcutting
Technology
WID_Master16_IndexableMilling_FaceMills_H068_H069_Metric_REBRAND.indd 69 11/11/15 9:32 AM
H70
LViWID M 16 I d bl Milli F Mill H070 H071 M i REBRANDO b 30 20159 50AM
widia.com
Roughing and Finishing with a Single Tool
Axial adjustment
wedge.
Quick cartridge stop — ready to
go in a minute with no adjustment
for roughing.
Standard Offering
D1 = 125–315mm
Roughing and Finishing with a Single Tool •
WIDIA™ M4000
M4000
• Roughing and fi nishing solution with a single tool.
• Adjustable pockets and cartridge stop feature.
• Easily change cartridges with different insert styles and lead angles.
• Best-in-class fl exibility lowers cost per tool.
• Easy runout adjustment.
• Perfect fl oor surface for fi nishing operations.
Cartridges with different insert styles and lead angles can
be easily changed.
WID_Master16_IndexableMilling_FaceMills_H070_H071_Metric_REBRAND.indd 70 10/30/15 1:03 PM
H71
LViWID M 16 I d bl Milli F Mill H070 H071 M i REBRANDO b 3020159 50AM
widia.com
Face Mills
P
M
K
N
S
H
M4000
Cartridge Milling System
All front line insert styles
available.
Diameter: 125–315mm
Pages: H72–H74
WID_Master16_IndexableMilling_FaceMills_H070_H071_Metric_REBRAND.indd 71 10/30/15 1:03 PM
H72
LViWID M 16 I d bl Milli F Mill H072 H073 M i REBRANDO b 14 20159 33AM
widia.com
Face Mills • M4000 Series
Tool Bodies • Cartridge Milling System
Spare Parts
D1
cartridge
screw Nm wedge
adjusting
screw
125 MS1294 20,0 12748308500 12748600900
160 MS1294 20,0 12748308500 12748600900
200 MS1294 20,0 12748308500 12748600900
250 MS1294 20,0 12748308500 12748600900
315 MS1294 20,0 12748308500 12748600900
Cartridge Milling System
order number catalogue number D1 D D4 D6 L
number of
cartridges kg
4136343 M4000D125Z06ADJ 125 40 — 108 68,0 6 3,34
4136344 M4000D125Z08ADJ 125 40 — 108 68,0 8 3,51
4136345 M4000D160Z08ADJ 160 40 66,7 137 63,0 8 5,19
4136346 M4000D160Z12ADJ 160 40 66,7 137 63,0 12 5,20
4136347 M4000D200Z10ADJ 200 60 101,6 178 63,0 10 8,02
4136348 M4000D200Z14ADJ 200 60 101,6 178 80,0 14 12,57
4136349 M4000D250Z12ADJ 250 60 101,6 228 63,0 12 13,53
4136350 M4000D250Z18ADJ 250 60 101,6 228 63,0 18 13,90
4136351 M4000D315Z16ADJ 315 60 101,6 293 80,0 16 25,08
4136352 M4000D315Z22ADJ 315 60 101,6 293 80,0 22 25,42
• Roughing and nishing with a single tool.
• Quick cartridge stop feature.
• Easy runout adjustment.
• Easy change of cartridges with different
insert styles and lead angles.
Face Mills
WID_Master16_IndexableMilling_FaceMills_H072_H073_Metric_REBRAND.indd 72 10/29/15 2:01 PM
H73
LViWID M 16 I d bl Milli F Mill H072 H073 M i REBRANDO b 1420159 33AM
widia.com
* For all details regarding insert offering and cutting conditions, please refer to the master platforms.
Face Mills • M4000 Series
Tool Bodies • Cartridge Milling System
Cartridge
order number catalogue number
insert
style
master
platform * Ap max
4159022 M4000CA-AD1505 AD.T1505 CIP 14,0
4159020 M4000CA-AP1003 AP.T1003 CIP 10,2
4159021 M4000CA-AP1604 AP.T1604 CIP 16,2
3968124 M4000CA-HN07 HN.J0704/XNGJ0704 M1200 Mini 3,5
4159018 M4000CA-HN07HD HN.J0704 M1200 Mini 4,7
4159017 M4000CA-HN07HF HN.J0704 M1200 Mini 1,0
3126691 M4000CA-HN09 HN.J0905/XNGJ0905 M1200 4,4
4159019 M4000CA-HN09HD HN.J0905 M1200 6,0
3954792 M4000CA-HN09HF HN.J0905 M1200 2,2
2511344 M4000CA-HP06 HP.T06T3 M640 4,8
2006361 M4000CA-MDHX10 MDHX1004 M76 1,0
2006346 M4000CA-RC1606 RC.T1606 M100 8,0
2067492 M4000CA-SD1204 SDM.1204 M690 11,7
2006359 M4000CA-SD1506 SDM.1506 M690 14,9
2006374 M4000CA-SE1203 SE.N1203/SE.R1203 M68 6,0
2033495 M4000CA-SE1204 SE.N1204/SE.R1204 M68 6,0
2006377 M4000CA-SE1504 SE.N1504/SE.R1504 M68 8,0
2006348 M4000CA-SN12 SN.T1205/XNKT1205 M660 6,4
2006360 M4000CA-SN15 SN.T1505 M660 8,0
2006362 M4000CA-SP12 121358680 M40Wiper 9,0
2006373 M4000CA-SP1203 SP.N1203/SP.R1203 M40 9,0
2006376 M4000CA-SP1504 SP.N1504 M40 12,0
2033496 M4000CA-TP1603 TP.N1603/TP.R1603 M40 12,0
2006379 M4000CA-TP2204 TP.N2204/TP.R2204 M40 18,0
2006347 M4000CA-XP16 XP.T1604 M680 14,0
Face Mills
WID_Master16_IndexableMilling_FaceMills_H072_H073_Metric_REBRAND.indd 73 10/29/15 2:01 PM
widia.com
H74
LViWID M 16 I d bl Milli F Mill H074 H075 M i REBRANDN b 10 20152 48PM
Face Mills • M4000 Series
Cartridges
M4000CA-
SN12
M4000CA-
SN12RC
M4000CA-
SN15
M4000CA-
XP16
M4000CA-
AP1003
M4000CA-
AD1505
M4000CA-
AP1604
M4000CA-
SD1204
M4000CA-
SD1506
order number order number order number order number order number order number order number order number order number
2006348 2006357 2006360 2006347 4159020 4159022 4159021 2067492 2006359
D1 D1 max D1 max D1 max D1 max D1 max D1 max D1 max D1 max D1 max
125 139,3 139,3 143 125 125 125 125 125 125
160 174,3 174,3 178 160 160 160 160 160 160
200 214,3 214,3 218 200 200 200 200 200 200
250 264,3 264,3 268 250 250 250 250 250 250
315 329,3 329,3 333 315 315 315 315 315 315
M4000CA-
MDHX10CA
M4000CA-
HN07HF
M4000CA-
HN07
M4000CA-
HN07HD
M4000CA-
HN09HF
M4000CA-
HN09
M4000CA-
HN09HD
M4000CA-
HP06
order number order number order number order number order number order number order number order number
2006361 4159017 3968124 4159018 3954792 3126691 4159019 2511344
D1 D1 max D1 max D1 max D1 max D1 max D1 max D1 max D1 max
125 125 139 134 132 143 136 133 131,4
160 160 174 169 167 178 171 168 166,4
200 200 214 209 207 218 211 208 206,4
250 250 264 259 257 268 261 258 256,4
315 315 329 324 322 333 326 323 321,4
M4000CA-
RC1606
M4000CA-
SE1203
M4000CA-
SE1204
M4000CA-
SE1504
M4000CA-
SP1203
M4000CA-
SP12 Wiper
M4000CA-
SP1504
M4000CA-
TP1603
M4000CA-
TP2204
order number order number order number order number order number order number order number order number order number
2006346 2006374 2033495 2006377 2006373 2006362 2006376 2033496 2006379
D1 D1 max D1 max D1 max D1 max D1 max D1 max D1 max D1 max D1 max
125 125 139 139 143 130,6 132,2 132,2 125 125
160 160 174 174 178 165,6 167,2 167,2 160 160
200 200 214 214 218 205,6 207,2 207,2 200 200
250 250 264 264 268 255,6 257,2 257,2 250 250
315 315 329 329 333 320,6 322,2 322,2 315 315
Face Mills
WID_Master16_IndexableMilling_FaceMills_H074_H075_Metric_REBRAND.indd 74 11/11/15 9:32 AM
LViWID M 16 I d bl Milli F Mill H074 H075 M i REBRANDN b 1020152 48PM
SuperFeed™
Reduced
Complexity
with Exceptional
Finishing
Capabilities
The new SuperFeed face mills and end mills are the fi rst choice PCD platform for
machining aluminium in the transportation and general engineering industries.
• Durable, lightweight anodised aluminium cutter body.
• DovLok PCD cartridge design.
• Simple, user-friendly axial adjustment range from 0,3–0,8mm.
• Fine-pitch cutters reduce cycle times while offering higher MRR and productivity.
• Reduce overall tooling costs with reconditioning.
To learn more about the benefi ts of WIDIA™ SuperFeed, contact your local distributor.
WID_Master16_IndexableMilling_FaceMills_H074_H075_Metric_REBRAND.indd 75 11/11/15 9:32 AM
LViWID M 16 I d bl Milli Ch f Mill I000 I001 M i REBRANDO b 14 20159 38AM
WID_Master16_IndexableMilling_ChamferMills_I000_I001_Metric_REBRAND.indd 1 10/29/15 2:03 PM
I1
LViWID M 16 I d bl Milli Ch f Mill I000 I001 M i REBRANDO b 1420159 38AM
widia.com
M25 ...........................................................................................................................................................................I2–I10
Indexable Milling • Chamfer Mills
WID_Master16_IndexableMilling_ChamferMills_I000_I001_Metric_REBRAND.indd 1 10/29/15 2:03 PM
I2
LViWID M 16 I d bl Milli Ch f Mill I002 I003 M i REBRANDO b 30 20159 50AM
widia.com
45° lead angle for most
chamfering applications.
Strong tool design for
optimum insert support.
Clearance for back-chamfer operations.
For Chamfering and Countersinking Applications •
M25™ Series Chamfer Mills
M25
• Strong tool design for optimum insert support.
• 45˚ lead angle for most chamfering applications.
M25 Series Chamfer Mills are the ideal tool of choice for milling all steel, stainless
steel, and cast iron materials. With clearance for back-chamfer operations, the M25
Series will help streamline your most challenging milling operations.
WID_Master16_IndexableMilling_ChamferMills_I002_I003_Metric_REBRAND.indd 2 10/30/15 1:01 PM
I3
LViWID M 16 I d bl Milli Ch f Mill I002 I003 M i REBRANDO b 3020159 50AM
widia.com
Chamfer Mills M25™ SD0903..
Max depth of cut: 6,4mm
Lead angle: 45°
Indexes per insert: 4
Diameter: 25–40mm
Pages: I4–I6, I8, I10
P
M
K
N
S
H
M25 SP1204..
Max depth of cut: 8,3mm
Lead angle: 45°
Indexes per insert: 4
Diameter: 50–63mm
Pages: I7, I9–I10
P
M
K
N
S
H
WID_Master16_IndexableMilling_ChamferMills_I002_I003_Metric_REBRAND.indd 3 10/30/15 1:01 PM
I4
LViWID M 16 I d bl Milli Ch f Mill I004 I005 M i REBRANDO b 14 20159 39AM
widia.com
Chamfer Mills • M25™ Series
Weldon® Shanks
insert
screw Nm
Torx
wrench
12148095100 3,0 12148000600
Spare Parts
Weldon Shanks
order number catalogue number D D1 D1 max L L2 Ap1 max Z insert 1
coolant
supply kg
2022628 12292510400 16 16 28,8 75 27 6,4 2 SD..0903.. No 0,10
2022629 12292510800 25 25 37,8 96 40 6,4 2 SD..0903.. No 0,30
2022630 12292511000 32 32 44,8 100 40 6,4 3 SD..0903.. No 0,50
Chamfer Mills
• Chamfer milling in steel, stainless steel,
and cast iron.
WID_Master16_IndexableMilling_ChamferMills_I004_I005_Metric_REBRAND.indd 4 10/29/15 2:03 PM
I5
LViWID M 16 I d bl Milli Ch f Mill I004 I005 M i REBRANDO b 1420159 39AM
widia.com
Cylindrical Shanks
Spare Parts
Cylindrical Shanks
order number catalogue number D1 D1 max D L L2 Ap1 max Z insert 1
coolant
supply kg
2022634 12292550400 16 28,8 16 200 27 6,4 2 SD..0903.. No 0,40
2022635 12292550800 25 37,8 25 200 40 6,4 2 SD..0903.. No 0,70
2022636 12292551000 32 44,8 32 200 40 6,4 3 SD..0903.. No 1,20
• Chamfer milling in steel, stainless steel,
and cast Iron.
insert
screw Nm
Torx
driver
12148095100 3,0 12148000600
Chamfer Mills
Chamfer Mills • M25™ Series
WID_Master16_IndexableMilling_ChamferMills_I004_I005_Metric_REBRAND.indd 5 10/29/15 2:03 PM
I6
LViWID M 16 I d bl Milli Ch f Mill I006 I007 M i REBRANDO b 14 20159 39AM
widia.com
Chamfer Mills • M25™ Series
Shell Mills
insert
screw Nm
Torx
driver
12148095100 3,0 12148000600
Spare Parts
Shell Mills
NOTE: Standard milling cutters will accept insert nose radii up to 2mm without modification.
order number catalogue number D1 D1 max D L Ap1 max Z insert 1
coolant
supply kg
2022631 12292511200 40 52,3 22 40 6,1 4 SD..0903.. No 0,80
Chamfer Mills
• Chamfer milling in steel, stainless steel,
and cast iron.
WID_Master16_IndexableMilling_ChamferMills_I006_I007_Metric_REBRAND.indd 6 10/29/15 2:03 PM
I7
LViWID M 16 I d bl Milli Ch f Mill I006 I007 M i REBRANDO b 1420159 39AM
widia.com
Chamfer Mills • M25™ Series
Shell Mills
Chamfer Mills
Spare Parts
Shell Mills
order number catalogue number D1 D1 max D L Ap1 max Z insert 1
coolant
supply kg
2022632 12292511400 50 66,7 22 40 8,3 4 SP..1204.. No 0,90
2022633 12292511600 63 79,7 22 40 8,3 5 SP..1204.. No 1,10
• Chamfer milling in steel, stainless steel,
and cast Iron.
insert
screw Nm
Torx
driver
12148007200 4,0 12148007500
WID_Master16_IndexableMilling_ChamferMills_I006_I007_Metric_REBRAND.indd 7 10/29/15 2:03 PM
I8
LViWID M 16 I d bl Milli Ch f Mill I008 I009 M i REBRANDO b 14 20159 39AM
widia.com
Chamfer Mills • M25™ Series
Inserts
Insert Selection Guide for Insert Style SD09
Chamfer Mills
Material
Group
Light
Machining
General
Purpose
Heavy
Machining
Geometry Grade Geometry Grade Geometry Grade
P1–P2
. .. TN7525
. .. TN7525
. .. TN7525
P3–P4
. .. TN7525
. .. TN7535
. .. TN7535
P5–P6
. .. TN7525
. .. TN7535
. .. TN7535
M1–M2
. .. TN7525
. .. TN7525
. .. TN7525
M3
. .. TN7535
. .. TN7535
. .. TN7535
K1–K2
––
––
––
K3
. .. TN7535
. .. TN7535
. .. TN7535
N1–N2
––
––
––
N3
––
––
––
S1–S2
––
––
––
S3
––
––
––
S4
––
––
––
H1
. .. TN2510
––
––
P
M
K
N
S
H
SDNT
catalogue number
cutting
edges D L10 M S hm
TN2510
TN7525
TN7535
SDNT090308 4 9,53 9,53 1,64 3,18 0,10
–
2030200
2030198
SDNT090308T 4 9,53 9,53 1,64 3,18 0,10
2028336
–
–
rst choice
alternate choice
SDNT
P
M
K
N
S
H
SDMW
rst choice
alternate choice
SDMW
catalogue number
cutting
edges D L10 M S hm
TN7525
THM
SDMW090308 4 9,53 9,53 1,64 3,18 0,10
2105263
2028332
WID_Master16_IndexableMilling_ChamferMills_I008_I009_Metric_REBRAND.indd 8 10/29/15 2:03 PM
I9
LViWID M 16 I d bl Milli Ch f Mill I008 I009 M i REBRANDO b 1420159 39AM
widia.com
Chamfer Mills • M25™ Series
Inserts
Chamfer Mills
P
M
K
N
S
H
SPNT
catalogue number
cutting
edges D L10 M S hm
TN7525
TN7535
SPNT120408 4 12,70 12,70 2,30 4,76 0,10
2029794
2029792
rst choice
alternate choice
P
M
K
N
S
H
rst choice
alternate choice
SPMW
SPMW
catalogue number
cutting
edges D L10 M S hm
THM
WK15CM
SPMW120408 4 12,70 12,70 2,30 4,76 0,14
2014066
5427380
SPNT
Insert Selection Guide for Insert Style SP12
Material
Group
Light
Machining
General
Purpose
Heavy
Machining
Geometry Grade Geometry Grade Geometry Grade
P1–P2
. .. TN7525
. .. TN7525
. .. TN7525
P3–P4
. .. TN7525
. .. TN7535
. .. TN7535
P5–P6
. .. TN7525
. .. TN7535
. .. TN7535
M1–M2
. .. TN7525
. .. TN7525
. .. TN7525
M3
. .. TN7535
. .. TN7535
. .. TN7535
K1–K2
. .. WK15CM
. .. WK15CM
. .. WK15CM
K3
. .. TN7535
. .. WK15CM
. .. WK15CM
N1–N2
––
––
––
N3
––
––
––
S1–S2
––
––
––
S3
––
––
––
S4
––
––
––
H1
––
––
––
WID_Master16_IndexableMilling_ChamferMills_I008_I009_Metric_REBRAND.indd 9 10/29/15 2:03 PM
widia.com
I10
LViWID M 16 I d bl Milli Ch f Mill I010 I011 M i REBRANDN b 12 20158 26AM
Chamfer Mills • M25™ Series
Recommended Starting Speeds
Recommended Starting Speeds [m/min]
NOTE: FIRST choice starting speeds are in bold type.
As the average chip thickness increases, the speed should be decreased.
Material
Group TN2510 TN7525 TN7535 WK15CM THM
P
1
660
580
540 410
310
280 545
475
445 –
–
––
–
–
2
410
370
330 310
250
215 335
305
275 –
–
––
–
–
3
370
330
305 280
215
185 305
275
245 –
–
––
–
–
4
275
260
230 235
170
145 230
210
190 –
–
––
–
–
5
330
300
275 310
235
200 310
275
250 –
–
––
–
–
6
230
205
175 205
160
130 190
160
130 –
–
––
–
–
M
1
270
240
210 245
220
185 245
220
185 –
–
––
–
–
2
245
210
190 220
190
170 220
190
170 –
–
––
–
–
3
190
175
150 175
155
140 175
155
140 –
–
––
–
–
K
1
420
360
300 380
280
240 355
320
290 505
460
410 145
110
90
2
360
300
250 325
240
200 280
250
230 400
355
330 150
120
85
3
300
250
200 240
200
170 235
210
190 335
300
275 155
115
70
N
1
–
–
––
–
––
–
––
–
– 1080
720
600
2
–
–
––
–
––
–
––
–
– 820
560
460
3
–
–
––
–
––
–
––
–
– 540
335
240
S
1
–
–
––
–
––
–
––
–
––
–
–
2
–
–
––
–
––
–
––
–
––
–
–
3
–
–
––
–
––
–
––
–
––
–
–
4
–
–
––
–
––
–
––
–
––
–
–
H
1
145
110
70 –
–
––
–
––
–
––
–
–
2
145
110
70 –
–
––
–
––
–
––
–
–
3
115
80
45 –
–
––
–
––
–
––
–
–
Recommended Starting Feeds [mm] Light
Machining
General
Purpose
Heavy
Machining
Recommended Starting Feeds
Chamfer Mills
NOTE: Use “Light Machining” value as starting feed rate.
Insert
Geometry Programmed Feed per Tooth (fz)
Insert
Geometry
SD09 0,10
0,15
0,30 SD09
SP12 0,10
0,15
0,35 SP12
WID_Master16_IndexableMilling_ChamferMills_I010_I011_Metric_REBRAND.indd 10 11/12/15 8:54 AM
Global Reconditioning Network
To use WIDIA™ tool reconditioning services, contact your authorised
WIDIA distributor to get started.
Reconditioning Services
Anyone can regrind our tools –
but only we can recondition them
WIDIA™ Reconditioning Services optimise the value of metalcutting tools
throughout their entire lifecycle by giving like-new performance — with rapid
turnaround time — so tools are always on hand and perform just like new.
Huntley, IL
Kingwinford, UK
Istanbul, Turkey
Shlomi, Israel
Tianjin, China
Shanghai, China
Busan, Korea
Bangalore, India
Zory, Poland
Gurgaon, India
Pune, India
Koenigsee, Germany
Barcelona, Spain Milan,
Italy
Indaiatuba,
Brazil
Whitehouse, OH
Asheboro, NC
To locate a Reconditioning Center near you, visit widia.com/services.
WID_Master16_IndexableMilling_ChamferMills_I010_I011_Metric_REBRAND.indd 11 11/12/15 8:54 AM
LViWID M 16 I d bl MIlli Sh ld Mill J000 J001 M i REBRANDO b 14 20159 41AM
WID_Master16_IndexableMIlling_ShoulderMills_J000_J001_Metric_REBRAND.indd 1 10/29/15 2:05 PM
widia.com J1
LViWID M 16 I d bl MIlli Sh ld Mill J000 J001 M i REBRANDO b 1420159 41AM
VSM11 • Versatile — Single-Sided 90° Shoulder Mill Platform .......................................................................J2–J16
VSM17 • Versatile — Single-Sided 90° Shoulder Mill Platform .....................................................................J18–J29
VSM490-15 • Double-Sided Shoulder Milling Platform with Four Cutting Edges .......................................J30–J40
M690 • Square Insert Shoulder Mill Platform .................................................................................................J42–J51
Indexable Milling • 90° Shoulder Mills
WID_Master16_IndexableMIlling_ShoulderMills_J000_J001_Metric_REBRAND.indd 1 10/29/15 2:05 PM
J2
LViWID M 16 I d bl MIlli Sh ld Mill J002 J003 M i REBRANDO b 30 20159 51AM
widia.com
Features
• Insert geometries and grades
for all workpiece materials.
• Insert corner radius from 0,4–3,1mm
(.016–.122").
Benefi ts
• Achieve 90° wall fi nish.
• Longer tool life.
• Latest WIDIA Victory milling grades
for all workpiece materials.
• Soft cutting action, reduced cycle times,
and low horsepower consumption.
• Stability and reliability.
Multiple corner
nose radii available.
Optimised cutting edge
and positive rake face
for reduced cutting
forces and softer
cutting action.
Innovative cutting
geometry provides
superior wall and
surface fi nish.
WIDIA™ Victory™ Shoulder Mill 11™ •
VSM11™
VSM11
Victory™ Shoulder Mill 11™ is a high-performance, versatile, robust, 90° square shoulder milling platform. VSM11 is
designed for versatility, low horsepower consumption, and easy cutting action. Cutters can be used for profi ling, face
milling, slotting, ramping, helical interpolation, circular interpolation, and other milling applications. Inserts are specially
designed with innovative geometries and features like variable rake angles, negative T-land, small hone, and the latest
Victory grades enhancing tool performance and versatility.
Take advantage of the high-performance, advanced carbide substrates, coatings, and surface treatment technologies of
the available 6 Victory grades, 5 geometries, and broad range of cutter body product portfolio. This platform works with
multiple material types and applications.
• State-of-the-art step down capability.
• Screw-on, end mill, and shell mill cutters with effective
internal coolant supply.
WID_Master16_IndexableMIlling_ShoulderMills_J002_J003_Metric_REBRAND.indd 2 10/30/15 1:03 PM
J3
LViWID M 16 I d bl MIlli Sh ld Mill J002 J003 M i REBRANDO b 3020159 51AM
widia.com
90° Shoulder Mills
P
M
K
N
S
H
VSM11™
Max depth of cut: 11,7mm
Lead angle: 90°
Indexes per insert: 2
Diameter: 16–125mm
Pages: J4–J16
Insert Offering
XDPT-MH
PMKS
First choice for heavy-duty machining.
Steel and cast iron materials.
Precision pressed to size.
XDPT-MM
PMKSH
Medium to heavy machining.
First choice for general purpose.
Precision pressed to size.
XDCW-PCD
N
Roughing and fi nishing
of aluminium alloys.
Abrasive non-ferrous materials.
High precision.
Periphery ground.
XDCT-ALP
N
Roughing and fi nishing
of aluminium alloys.
High precision.
Periphery ground.
XDCT-ML
PMSH
Light to medium machining.
First choice for stainless steel
and titanium.
Periphery ground.
WID_Master16_IndexableMIlling_ShoulderMills_J002_J003_Metric_REBRAND.indd 3 10/30/15 1:03 PM
J4
LViWID M 16 I d bl Milli Sh ld Mill J004 J005 M i REBRANDO b 14 20159 41AM
widia.com
Victory™ Shoulder Mills • VSM11™ Series
Tool Bodies
Spare Parts
insert
screw Nm wrench
192.432 1,0 170.028
NOTE: Standard milling cutters will accept insert nose radii up to 1,6mm without modification.
For tool body modification instructions, see page J16.
Screw-On End Mills
order number catalogue number D1 D DPM G3X L2 WF Ap1 max Z
max
ramp angle
coolant
supply max RPM kg
5417011 VSM11D016Z02M08XD11 16 13 8,5 M8 25 10 11,5 2 10.0° Yes 41400 0,02
5417013 VSM11D020Z03M10XD11 20 18 10,5 M10 28 15 11,6 3 7.8° Yes 35100 0,05
5417015 VSM11D025Z04M12XD11 25 21 12,5 M12 32 17 11,5 4 5.3° Yes 30200 0,08
5417017 VSM11D032Z04M16XD11 32 29 17,0 M16 40 24 11,4 4 3.6° Yes 25800 0,18
5417019 VSM11D040Z06M16XD11 40 29 17,0 M16 40 24 11,4 6 2.6° Yes 22600 0,24
Shoulder Mills
• True 90° capability.
• Increased ramping capability.
• Superior wall and surface nish.
• Effective internal coolant feature,
precisely reaching the cutting edge.
WID_Master16_IndexableMilling_ShoulderMills_J004_J005_Metric_REBRAND.indd 4 10/29/15 2:05 PM
J5
LViWID M 16 I d bl Milli Sh ld Mill J004 J005 M i REBRANDO b 1420159 41AM
widia.com
Victory™ Shoulder Mills • VSM11™ Series
Weldon® Shanks
Spare Parts
insert
screw Nm wrench
192.432 1,0 170.028
NOTE: Standard milling cutters will accept insert nose radii up to 1,6mm without modification.
For tool body modification instructions, see page J16.
Weldon Shanks
order number catalogue number D1 D L L2 Ap1 max Z
max
ramp angle
coolant
supply max RPM kg
5416454 VSM11D012Z01B16XD11 12 16 70 21 11,7 1 3.7° Yes 53100 0,08
5416455 VSM11D016Z02B16XD11 16 16 70 21 11,5 2 10.0° Yes 41400 0,09
5416457 VSM11D020Z02B20XD11 20 20 81 30 11,6 2 7.8° Yes 35100 0,15
5416458 VSM11D020Z03B20XD11 20 20 81 30 11,6 3 7.8° Yes 35100 0,16
5416459 VSM11D025Z03B25XD11 25 25 88 31 11,5 3 5.3° Yes 30200 0,27
5416480 VSM11D025Z04B25XD11 25 25 88 31 11,5 4 5.3° Yes 30200 0,28
5416481 VSM11D030Z04B25XD11 30 25 88 31 11,5 4 3.2° Yes 26900 0,30
5416482 VSM11D032Z04B32XD11 32 32 100 39 11,4 4 3.6° Yes 25800 0,51
5416483 VSM11D032Z05B32XD11 32 32 100 39 11,4 5 3.6° Yes 25800 0,52
• True 90° capability.
• Increased ramping capability.
• Superior wall and surface nish.
• Effective internal coolant feature,
precisely reaching the cutting edge.
Shoulder Mills
WID_Master16_IndexableMilling_ShoulderMills_J004_J005_Metric_REBRAND.indd 5 10/29/15 2:05 PM
J6
LViWID M 16 I d bl Milli Sh ld Mill J006 J007 M i REBRANDO b 14 20159 42AM
widia.com
Victory™ Shoulder Mills • VSM11™ Series
Cylindrical End Mills
Spare Parts
insert
screw Nm wrench
192.432 1,0 170.028
NOTE: Standard milling cutters will accept insert nose radii up to 1,6mm without modification.
For tool body modification instructions, see page J16.
Cylindrical End Mills
order number catalogue number D1 D L L2 Ap1 max Z
max
ramp angle
coolant
supply max RPM kg
5416632 VSM11D012Z01A16XD11L100 12 16 100 25 11,7 1 3.7° Yes 53100 0,13
5416633 VSM11D016Z02A16XD11L100 16 16 100 31 11,5 2 10.0° Yes 41400 0,12
5416634 VSM11D020Z02A20XD11L110 20 20 110 31 11,6 2 7.8° Yes 35100 0,22
5416635 VSM11D020Z03A20XD11L110 20 20 110 31 11,6 3 7.8° Yes 35100 0,23
5416636 VSM11D025Z03A25XD11L120 25 25 120 33 11,5 3 5.3° Yes 30200 0,39
5416637 VSM11D025Z04A25XD11L120 25 25 120 33 11,5 4 5.3° Yes 30200 0,40
5416638 VSM11D032Z03A32XD11L130 32 32 130 41 11,4 3 3.6° Yes 25800 0,70
5416639 VSM11D032Z05A32XD11L130 32 32 130 41 11,4 5 3.6° Yes 25800 0,71
Shoulder Mills
• True 90° capability.
• Increased ramping capability.
• Superior wall and surface nish.
• Effective internal coolant feature,
precisely reaching the cutting edge.
WID_Master16_IndexableMilling_ShoulderMills_J006_J007_Metric_REBRAND.indd 6 10/29/15 2:05 PM
J7
LViWID M 16 I d bl Milli Sh ld Mill J006 J007 M i REBRANDO b 1420159 42AM
widia.com
Victory™ Shoulder Mills • VSM11™ Series
Cylindrical End Mills • Long Shanks
Spare Parts
insert
screw Nm wrench
192.432 1,0 170.028
NOTE: Standard milling cutters will accept insert nose radii up to 1,6mm without modification.
For tool body modification instructions, see page J16.
Cylindrical End Mills • Long Shanks
order number catalogue number D1 D L L2 Ap1 max Z
max
ramp angle
coolant
supply max RPM kg
5416700 VSM11D016Z02A16XD11L170 16 16 170 25 11,5 2 10.0° Yes 41400 0,23
5416701 VSM11D018Z02A16XD11L170 18 16 170 25 11,6 2 9.7° Yes 37900 0,23
5416702 VSM11D020Z02A20XD11L170 20 20 170 41 11,6 2 7.8° Yes 35100 0,35
5416703 VSM11D020Z03A20XD11L170 20 20 170 41 11,6 3 7.8° Yes 35100 0,36
5416704 VSM11D022Z03A20XD11L170 22 20 170 30 11,5 3 6.6° Yes 32900 0,37
5416705 VSM11D025Z03A25XD11L210 25 25 210 50 11,5 3 5.3° Yes 30200 0,70
5416706 VSM11D025Z04A25XD11L210 25 25 210 50 11,5 4 5.3° Yes 30200 0,72
5416707 VSM11D032Z03A32XD11L250 32 32 250 65 11,4 3 3.6° Yes 25800 1,39
• True 90° capability.
• Increased ramping capability.
• Superior wall and surface nish.
• Effective internal coolant feature,
precisely reaching the cutting edge.
Shoulder Mills
WID_Master16_IndexableMilling_ShoulderMills_J006_J007_Metric_REBRAND.indd 7 10/29/15 2:05 PM
J8
LViWID M 16 I d bl Milli Sh ld Mill J008 J009 M i REBRANDN b 10 20153 03PM
widia.com
Victory™ Shoulder Mills • VSM11™ Series
Shell Mills
Spare Parts
D1
insert
screw Nm wrench
socket-head
cap screw
socket-head cap screw
with coolant groove
coolant lock
screw assembly
40,0 192.432 1,0 170.028 MS1294 MS1294CG –
50,0 192.432 1,0 170.028 12146120500 MS1234CG –
63,0 192.432 1,0 170.028 12146120500 MS1234CG –
80,0 192.432 1,0 170.028 125.230 MS2038CG –
100,0 192.432 1,0 170.028 – – MS2195C
125,0 192.432 1,0 170.028 – – MS2187C
NOTE: Socket-head cap screw and coolant lock screw assembly must be ordered separately.
Shell Mills
order number catalogue number D1 D D6 L Ap1 max Z
max
ramp angle
coolant
supply max RPM kg
5416316 VSM11D040Z04S016XD11 40 16 37 40 11,4 4 2.6° Yes 22600 0,22
5416317 VSM11D040Z06S016XD11 40 16 37 40 11,4 6 2.6° Yes 22600 0,22
5416318 VSM11D050Z05S022XD11 50 22 44 40 11,3 5 1.9° Yes 19900 0,33
5416319 VSM11D050Z08S022XD11 50 22 44 40 11,3 8 1.9° Yes 19900 0,33
5416340 VSM11D063Z06S022XD11 63 22 44 40 11,3 6 1.5° Yes 17500 0,50
5416341 VSM11D063Z09S022XD11 63 22 44 40 11,3 9 1.5° Yes 17500 0,52
5416342 VSM11D080Z08S027XD11 80 27 60 50 11,3 8 1.1° Yes 15300 1,14
5416345 VSM11D100Z09S032XD11 100 32 80 50 11,3 9 0.9° Yes 13600 1,79
5416347 VSM11D125Z011S040XD11 125 40 80 63 11,3 11 0.7° Yes 12100 3,01
Shoulder Mills
• True 90° capability.
• Increased ramping capability.
• Superior wall and surface nish.
• Effective internal coolant feature,
precisely reaching the cutting edge.
WID_Master16_IndexableMilling_ShoulderMills_J008_J009_Metric_REBRAND.indd 8 11/11/15 9:32 AM
J9
LViWID M 16 I d bl Milli Sh ld Mill J008 J009 M i REBRANDN b 1020153 03PM
widia.com
Insert Selection Guide
Material
Group
Light
Machining
General
Purpose
Heavy
Machining
Geometry Grade Geometry Grade Geometry Grade
P1–P2
.E..ML WP40PM
.E..MM WP40PM
.S..MH WP40PM
P3–P4
.E..ML WP35CM
.E..MM WP35CM
.S..MH WP35CM
P5–P6
.E..MM WP25PM
.S..MH WP35CM
.S..MH WP35CM
M1–M2
.E..ML WU35PM
.E..MM WU35PM
.S..MH WU35PM
M3
.E..ML WU35PM
.E..MM WU35PM
.S..MH WU35PM
K1–K2
.E..ML WK15CM
.E..MM WK15CM
.S..MH WK15CM
K3
.E..ML WP25PM
.E..MM WP25PM
.S..MH WP25PM
N1–N2
.F..ALP WN25PM
.F..ALP WN25PM
.E..ML WP25PM
N3
.F..ALP WN25PM
.F..ALP WN25PM
.E..ML WP25PM
S1–S2
.E..ML WP25PM
.E..MM WU35PM
.S..MH WU35PM
S3
.E..ML WP25PM
.E..MM WU35PM
.S..MH WU35PM
S4
.E..MM WU35PM
.S..MH WU35PM
––
H1
.E..MM WP25PM
.E..MM WP25PM
––
Victory™ Shoulder Mills • VSM11™ Series
Inserts
Shoulder Mills
XDCT-ML
catalogue number
cutting
edges L1 BS S W R¡hm
WDN10U
WK15CM
WN25PM
WP25PM
WP35CM
WP40PM
WS30PM
WU35PM
XDCT110404PDERML 2 13,43 2,09 4,00 6,90 0,40 0,04
–
–
–
5536671
5536670
5642230
–
–
XDCT110408PDERML 2 13,44 1,69 4,00 6,90 0,80 0,04
–
5415549
–
5415548
5415547
5545065
5517826
5415546
rst choice
alternate choice
P
M
K
N
S
H
XDCT-ML
• -ML is a light- to medium-machining geometry and is the
rst choice for stainless steel and titanium materials.
WID_Master16_IndexableMilling_ShoulderMills_J008_J009_Metric_REBRAND.indd 9 11/11/15 9:32 AM
J10
LViWID M 16 I d bl Milli Sh ld Mill J010 J011 M i REBRANDN b 10 20153 07PM
widia.com
Victory™ Shoulder Mills • VSM11™ Series
XDPT-MM
catalogue number
cutting
edges L1 BS S W R¡hm
WDN10U
WK15CM
WN25PM
WP25PM
WP35CM
WP40PM
WS30PM
WU35PM
XDPT110404PDSRMM 2 13,43 2,06 4,00 6,90 0,40 0,06
–
5415428
–
5642237
5415450
5642231
–
–
XDPT110408PDSRMM 2 13,44 1,68 4,00 6,90 0,79 0,06
–
5415315
–
5415319
5415318
5545063
5519921
5415317
XDPT110412PDSRMM 2 13,44 1,29 4,00 6,90 1,20 0,06
–
5415310
–
5415314
5415313
5642232
–
5415312
XDPT110416PDSRMM 2 13,51 0,85 4,13 6,95 1,60 0,06
–
5415250
–
5415254
5415253
5642233
–
–
XDPT110420PDSRMM 2 13,51 0,45 4,13 6,95 2,00 0,06
–
–
–
5980399
5980400
5980398
–
–
XDPT110424PDSRMM 2 13,37 — 4,01 6,94 2,40 0,06
–
–
–
5901355
–
5901354
–
–
XDPT110431PDSRMM 2 12,91 — 4,00 6,89 3,10 0,06
–
5415422
–
5415426
5415425
5642234
5517827
–
rst choice
alternate choice
Inserts
Shoulder Mills
XDPT-MM
• -MM is a medium- to heavy-machining geometry and is the
rst choice for general purpose and universal applications.
XDPT-MH
catalogue number
cutting
edges L1 BS S W R¡hm
WDN10U
WK15CM
WN25PM
WP25PM
WP35CM
WP40PM
WS30PM
WU35PM
XDPT110408PDSRMH 2 13,44 1,68 4,00 6,90 0,79 0,13
–
5415255
–
–
5415257
5545064
–
5415256
XDPT110412PDSRMH 2 13,44 1,29 4,00 6,90 1,20 0,13
–
5415360
–
–
5415362
5642235
–
–
XDPT110416PDSRMH 2 13,44 0,90 4,00 6,90 1,59 0,13
–
5415364
–
–
5415366
5642236
–
–
XDPT-MH
• -MH is a heavy-duty machining geometry and is the
rst choice for steel and cast iron materials.
P
M
K
N
S
H
WID_Master16_IndexableMilling_ShoulderMills_J010_J011_Metric_REBRAND.indd 10 11/11/15 9:32 AM
J11
LViWID M 16 I d bl Milli Sh ld Mill J010 J011 M i REBRANDN b 1020153 07PM
widia.com
Victory™ Shoulder Mills • VSM11™ Series
XDCW-PCD
catalogue number
cutting
edges L1 BS S W R¡hm
WDN10U
XDCW110404PDFRPCD 1 13,43 2,10 4,00 6,90 0,40 0,02
5415420
XDCW110408PDFRPCD 1 13,44 1,70 4,00 6,90 0,80 0,02
5415421
rst choice
alternate choice
Inserts
P
M
K
N
S
H
Shoulder Mills
XDCW-PCD
• -PCD is the rst choice for roughing and nishing of
abrasive non-ferrous materials and aluminium alloys.
rst choice
alternate choice
P
M
K
N
S
H
XDCT-ALP
• -ALP is the rst choice for roughing and nishing
of aluminium alloys.
XDCT-ALP
catalogue number
cutting
edges L1 BS S W R¡hm
WN10HM
WN25PM
XDCT110404PDFRALP 2 13,43 2,09 4,00 6,90 0,40 0,02
5933940
5417054
XDCT110408PDFRALP 2 13,44 1,69 4,00 6,90 0,80 0,02
5936171
5417053
XDCT110412PDFRALP 2 13,44 1,29 4,00 6,90 1,20 —
6055634
6055635
XDCT110416PDFRALP 2 13,44 0,88 4,00 6,89 1,60 —
6055598
6055599
XDCT110424PDFRALP 2 13,44 0,16 4,00 6,88 2,40 —
6055600
6055631
XDCT110432PDFRALP 2 12,86 — 4,00 6,89 3,20 —
6055632
6055633
WID_Master16_IndexableMilling_ShoulderMills_J010_J011_Metric_REBRAND.indd 11 11/11/15 9:32 AM
J12
LViWID M 16 I d bl Milli Sh ld Mill J012 J013 M i REBRANDO b 14 20159 42AM
widia.com
Recommended Starting Speeds [m/min]
Material
Group WP25PM WU35PM WP40PM WK15CM
P
1330 285 270 260 230 215 300 260 250 – ––
2275 240 200 220 190 160 250 220 180 – ––
3255 215 175 200 170 140 230 200 160 – ––
4225 185 150 180 150 120 210 170 140 – ––
5185 170 150 150 135 120 170 160 140 – ––
6165 125 100 130 100 80 150 120 90 – ––
M
1205 180 165 170 150 135 200 170 160 – ––
2185 160 130 155 130 110 180 150 130 – ––
3140 120 95 115 100 80 130 120 90 – ––
K
1230 205 185 – ––––– 420 385 340
2180 160 150 – ––––– 335 295 275
3150 135 120 – ––––– 280 250 230
N1–2 ––––––––––––
3––––––––––––
S
140 35 25 35 30 25 40 40 30 – ––
240 35 25 35 30 25 40 40 30 – ––
350 40 25 45 35 25 50 40 30 – ––
470 50 35 60 45 30 70 50 40 – ––
H1120 90 70 – ––––––––
Victory™ Shoulder Mills • VSM11™ Series
Recommended Starting Speeds
Shoulder Mills
(continued)
WID_Master16_IndexableMilling_ShoulderMills_J012_J013_Metric_REBRAND.indd 12 10/29/15 2:05 PM
J13
LViWID M 16 I d bl Milli Sh ld Mill J012 J013 M i REBRANDO b 1420159 42AM
widia.com
Recommended Starting Feeds [mm] Light
Machining
General
Purpose
Heavy
Machining
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry10% 20% 30% 40% 50–100%
.F..-PCD 0,08 0,17 0,23 0,06 0,13 0,18 0,06 0,11 0,15 0,05 0,10 0,14 0,05 0,10 0,14 .F..-PCD
.F..ALP 0,08 0,10 0,16 0,06 0,07 0,12 0,06 0,06 0,10 0,05 0,06 0,10 0,05 0,06 0,10 .F..ALP
.E..ML 0,09 0,18 0,30 0,07 0,14 0,23 0,06 0,12 0,20 0,05 0,11 0,19 0,05 0,11 0,18 .E..ML
.S..MM 0,17 0,20 0,34 0,13 0,15 0,25 0,11 0,13 0,22 0,10 0,12 0,21 0,10 0,12 0,20 .S..MM
.S..MH 0,17 0,25 0,40 0,13 0,19 0,30 0,11 0,17 0,26 0,10 0,15 0,24 0,10 0,15 0,24 .S..MH
NOTE: Use “Light Machining” values as starting feed rate.
Material
Group WS30PM WP35CM WN25PM WDN10U
P
1––– 455 395 370 – –––––
2––– 280 255 230 – –––––
3––– 255 230 205 – –––––
4––– 190 175 160 – –––––
5––– 260 230 210 – –––––
6––– 160 135 110 – –––––
M
1225 200 185 205 185 155 – –––––
2205 180 145 185 160 140 – –––––
3155 135 105 145 130 115 – –––––
K
1––– 295 265 240 – –––––
2––– 235 210 190 – –––––
3––– 195 175 160 – –––––
N1–2 –––––– 1075 945 875 2755 2450 2255
3–––––– 945 875 760 2285 1670 1355
S
145 40 30 – ––––––––
245 40 30 – ––––––––
355 45 30 – ––––––––
485 60 40 66 50 33 – –––––
H1––––––––––––
NOTE: FIRST choice starting speeds are in bold type.
As the average chip thickness increases, the speed should be decreased.
(Recommended Starting Speeds [m/min] — continued)
Victory™ Shoulder Mills • VSM11™ Series
Recommended Starting Speeds
Shoulder Mills
Recommended Starting Feeds
WID_Master16_IndexableMilling_ShoulderMills_J012_J013_Metric_REBRAND.indd 13 10/29/15 2:05 PM
J14
Language Version: WID_Master16_IndexableMIlling_ShoulderMills_J014_J015_Metric_REBRAND December 21, 2015 10:39 AM
widia.com
Order one of our starter kits and test the performance of our new VSM11 platform. The kits are set
up to serve the majority of shoulder milling applications, delivered with a cutter body and the latest
WIDIA Victory™ grades. Detailed order information can be found in the table below.
VSM11 Starter Kits • Metric
*Starter Kit to be delivered in regular WIDIA
™
corrugated box.
Victory™ Shoulder Mill 11™ Starter Kits
Achieve True 90° Shoulder Milling with the New
High-Performance WIDIA™ VSM11™ Starter Kits.
order
number catalogue number
diameter
D1 (mm)
cutter
body type
material
group
content
cutter qty inserts grade
Z (pocket
seats)
5527101 VSM11KITWD016Z02WP40PM 16 Weldon PVSM11D016Z02B16XD11 10 XDPT110408PDSRMM WP40PM 2
5527102 VSM11KITWD020Z03WP40PM 20 Weldon PVSM11D020Z03B20XD11 10 XDPT110408PDSRMM WP40PM 3
5527106 VSM11KITSD050Z05WP40PM 50 Shell PVSM11D050Z05S022XD11 10 XDPT110408PDSRMM WP40PM 5
5719051 VSM11KITSD040Z06WP40PM 40 Shell PVSM11D040Z06S016XD11 10 XDPT110408PDSRMM WP40PM 6
5719052 VSM11KITCD016Z02WP40PM 16 Cylindrical PVSM11D016Z02A16XD11L100 10 XDPT110408PDSRMM WP40PM 2
5719053 VSM11KITCD020Z03WP40PM 20 Cylindrical PVSM11D020Z03A20XD11L110 10 XDPT110408PDSRMM WP40PM 3
5719054 VSM11KITCD025Z04WP40PM 25 Cylindrical PVSM11D025Z04A25XD11L120 10 XDPT110408PDSRMM WP40PM 4
5719055 VSM11KITCD032Z03WP40PM 32 Cylindrical PVSM11D032Z03A32XD11L130 10 XDPT110408PDSRMM WP40PM 3
5886219
VSM11KITCD025Z03L120WP40PM
25 Cylindrical PVSM11D025Z03A25XD11L120 10 XDPT110408PDSRMM WP40PM 3
5886220*
VSM11KITCD025Z03L210WP40PM
25 Cylindrical PVSM11D025Z03A25XD11L210 10 XDPT110408PDSRMM WP40PM 3
5886251*
VSM11KITCD032Z03L250WP40PM
32 Cylindrical PVSM11D032Z03A32XD11L250 10 XDPT110408PDSRMM WP40PM 3
J15
L V i WID M 16 I d bl MIlli Sh ld Mill J014 J015 M i REBRANDN b 420159 10AM
widia.com
Victory™ Shoulder Mills • VSM11™ Series
Application Data
shoulder cut
Ø DH/DH1
DH min = Minimum blind hole diameter with helical interpolation
DH1 max = Maximum blind hole diameter with at bottom
ramp angle
helical
interpolation
ramping
NOTE: For DH1 max, subtract the insert corner radius from the max hole diameter.
Application Examples
order number catalogue number
number
of inserts
max
RPM
max ramp angle to
steel body interference
max flat-bottom
hole diameter
(DH1 max)
min hole
diameter
(DH min)
5417011 VSM11D016Z02M08XD11 2 41400 10.00° 32,00 19,00
5417013 VSM11D020Z03M10XD11 3 35100 7.80° 40,00 27,00
5417015 VSM11D025Z04M12XD11 4 30200 5.30° 50,00 37,00
5417017 VSM11D032Z04M16XD11 4 25800 3.60° 64,00 51,00
5417019 VSM11D040Z06M16XD11 6 22600 2.60° 80,00 67,00
5416454 VSM11D012Z01B16XD11 1 53100 3.70° 24,00 11,00
5416455 VSM11D016Z02B16XD11 2 41400 10.00° 32,00 19,00
5416457 VSM11D020Z02B20XD11 2 35100 7.80° 40,00 27,00
5416458 VSM11D020Z03B20XD11 3 35100 7.80° 40,00 27,00
5416459 VSM11D025Z03B25XD11 3 30200 5.30° 50,00 37,00
5416480 VSM11D025Z04B25XD11 4 30200 5.30° 50,00 37,00
5416481 VSM11D030Z04B25XD11 4 26900 3.20° 60,00 47,00
5416482 VSM11D032Z04B32XD11 4 25800 3.60° 64,00 51,00
5416483 VSM11D032Z05B32XD11 5 25800 3.60° 64,00 51,00
5416632 VSM11D012Z01A16XD11L100 1 53100 4.00° 24,00 11,00
5416633 VSM11D016Z02A16XD11L100 2 41400 10.00° 32,00 19,00
5416634 VSM11D020Z02A20XD11L110 2 35100 8.00° 40,00 27,00
5416635 VSM11D020Z03A20XD11L110 3 35100 8.00° 40,00 27,00
5416637 VSM11D025Z04A25XD11L120 4 30200 5.00° 50,00 37,00
5416636 VSM11D025Z03A25XD11L120 3 30200 5.00° 50,00 37,00
5416638 VSM11D032Z03A32XD11L130 3 25800 4.00° 64,00 51,00
5416639 VSM11D032Z05A32XD11L130 5 25800 4.00° 64,00 51,00
5416700 VSM11D016Z02A16XD11L170 2 41400 10.00° 32,00 19,00
5416701 VSM11D018Z02A16XD11L170 2 37900 10.00° 36,00 23,00
5416703 VSM11D020Z03A20XD11L170 3 35100 8.00° 40,00 27,00
5416702 VSM11D020Z02A20XD11L170 2 35100 8.00° 40,00 27,00
5416704 VSM11D022Z03A20XD11L170 3 32900 7.00° 44,00 31,00
5416705 VSM11D025Z03A25XD11L210 3 30200 5.00° 50,00 37,00
5416706 VSM11D025Z04A25XD11L210 4 30200 5.00° 50,00 37,00
5416707 VSM11D032Z03A32XD11L250 3 25800 4.00° 64,00 51,00
5416316 VSM11D040Z04S016XD11 4 22600 3.00° 80,00 67,00
5416317 VSM11D040Z06S016XD11 6 22600 3.00° 80,00 67,00
5416318 VSM11D050Z05S022XD11 5 19900 2.00° 100,00 87,00
5416319 VSM11D050Z08S022XD11 8 19900 2.00° 100,00 87,00
5416340 VSM11D063Z06S022XD11 6 17500 2.00° 126,00 113,00
5416341 VSM11D063Z09S022XD11 9 17500 2.00° 126,00 113,00
5416342 VSM11D080Z08S027XD11 8 15300 1.00° 160,00 147,00
5416345 VSM11D100Z09S032XD11 9 13600 0.90° 200,00 187,00
5416347 VSM11D125Z011S040XD11 11 12100 0.70° 250,00 237,00
Shoulder Mills
WID_Master16_IndexableMIlling_ShoulderMills_J014_J015_Metric_REBRAND.indd 15 11/20/15 2:57 PM
widia.com
J16
LViWID M 16 I d bl MIlli Sh ld Mill J016 J017 M i REBRANDN b 10 201512 32PM
Modifi cation Instructions for Use of Larger Radii Inserts
(Shoulder Mills and Helical Mills)
b
a
30º
material to remove
insert corner radius a b
3,1mm 0,2mm 1,8mm
Victory™ Shoulder Mills • VSM11™ Series
Application Example
Shoulder Mills
WID_Master16_IndexableMIlling_ShoulderMills_J016_J017_Metric_REBRAND.indd 16 11/10/15 2:18 PM
LViWID M 16 I d bl MIlli Sh ld Mill J016 J017 M i REBRANDN b 10201512 32PM
The Victory Shoulder Mill (VSM) family of tools provides a comprehensive solution for your most
challenging shoulder milling applications. The unique design of the VSM11™, VSM17™, and VSM490™
is capable of producing a true 90° wall in multiple material types. When combined with the latest WIDIA™
Victory™ grades, VSM from WIDIA provides superior performance at high speeds.
• Innovative cutting geometry provides superior wall and surface fi nish.
• State-of-the-art step-down capability.
• Real soft cutting action results in lower cutting forces and low machine power consumption.
• VSM11 and VSM17 offer aggressive ramping capabilities.
• VSM490 provides outstanding step-down capabilities in applications that require multiple passes.
To learn more about the benefi ts of the WIDIA™ Victory Shoulder Mill Series,
contact your local distributor.
Engineered
to Achieve
Superior
Surface
Quality
Victory™ Shoulder Mill Series
WID_Master16_IndexableMIlling_ShoulderMills_J016_J017_Metric_REBRAND.indd 17 11/10/15 2:18 PM
J18
LViWID M 16 I d bl MIlli Sh ld Mill J018 J019 M i REBRANDN b 12 20158 30AM
widia.com
WIDIA Victory Shoulder Mill 17 is a high-performance, versatile, robust, 90° square shoulder milling platform. VSM17 is
designed for versatility, low horsepower consumption, and easy cutting action. Cutters can be used for shoulder milling,
profi ling, face milling, slotting, ramping, helical interpolation, and circular interpolation milling applications. Inserts are
specially designed with innovative geometries and features like variable rake angles, negative T-land, small hone, and the
latest Victory grades enhancing tool performance and versatility.
Take advantage of the high-performance, advanced carbide substrates, coatings, and surface treatment technologies of
the available 7 Victory grades, 4 geometries, and a broad-range cutter body product portfolio. This platform works with
multiple material types and applications.
Features
• Insert geometries and grades for all workpiece materials.
• Insert corner radius from 0,4–4mm (.015–.157").
• Max axial depth of cut 16,3mm (0.65").
Benefi ts
• Achieve true 90° wall fi nish.
• High performance and longer tool life.
• Latest WIDIA Victory milling grades for
all workpiece materials.
• High positive geometry, soft cutting action,
reduced cycle times, and low horsepower
consumption.
• Stability and reliability.
Multiple corner
nose radii available.
Optimised cutting edge
and positive rake face
for reduced cutting
forces and softer
cutting action.
Innovative cutting
geometry provides
superior wall and
surface fi nish.
VSM17
• Up to 16,33mm (.65") depth-of-cut capabilities.
• State-of-the-art step down capability.
• Screw-on, end mill, and shell mill cutters with effective
internal coolant supply.
WIDIA™ Victory™ Shoulder Mill 17™ •
VSM17™
WID_Master16_IndexableMIlling_ShoulderMills_J018_J019_Metric_REBRAND.indd 18 11/12/15 8:57 AM
J19
LViWID M 16 I d bl MIlli Sh ld Mill J018 J019 M i REBRANDN b 1220158 30AM
widia.com
90° Shoulder Mills
Insert Offering
XDCT-ALP
N
Roughing and fi nishing
of aluminium alloys.
High precision.
Periphery ground.
XDCT-ML
PMSH
Light to medium machining.
First choice for stainless steel
and titanium.
Periphery ground.
XDPT-MH
PMKS
First choice for heavy-duty machining.
Steel and cast iron materials.
Precision pressed to size.
XDPT-MM
PMKSH
Medium to heavy machining.
First choice for general purpose.
Precision pressed to size.
VSM17™
Max depth of cut: 16,33mm
Lead angle: 90°
Indexes per insert: 2
Diameter: 25–160mm
P
M
K
N
S
Pages: J20–J29
WID_Master16_IndexableMIlling_ShoulderMills_J018_J019_Metric_REBRAND.indd 19 11/12/15 8:57 AM
J20
LViWID M 16 I d bl Milli Sh ld Mill J020 J021 M i REBRANDO b 14 20159 45AM
widia.com
Victory™ Shoulder Mills • VSM17™ Series
Screw-On End Mills
Spare Parts
insert
screw Nm wrench
191.725 3,5 170.025
NOTE: Standard milling cutters will accept insert nose radii up to 1,6mm without modification.
For tool body modification instructions, see page J16.
Screw-On End Mills
order number catalogue number D1 D DPM G3X L2 WF Ap1 max Z
max
ramp
angle
coolant
supply max RPM kg
5988091 VSM17D025Z02M12XD17 25 21 12,5 M12 35 17 16,3 2 8.8 Yes 41800 0,08
5988092 VSM17D032Z03M16XD17 32 29 17,0 M16 40 24 16,3 3 5.7 Yes 34700 0,17
5988132 VSM17D32Z02M016XD17 32 29 17,0 M16 40 24 16,3 2 5.7 Yes 34700 0,18
5988093 VSM17D040Z04M16XD17 40 29 17,0 M16 40 24 16,2 4 4.0 Yes 29800 0,20
5988131 VSM17D40Z03M016XD17 40 29 17,0 M16 40 24 16,2 3 4.0 Yes 29800 0,20
Shoulder Mills
WID_Master16_IndexableMilling_ShoulderMills_J020_J021_Metric_REBRAND.indd 20 10/29/15 2:05 PM
J21
LViWID M 16 I d bl Milli Sh ld Mill J020 J021 M i REBRANDO b 1420159 45AM
widia.com
Victory™ Shoulder Mills • VSM17™ Series
Weldon® Shanks
Spare Parts
insert
screw Nm wrench
191.725 3,5 170.025
NOTE: Standard milling cutters will accept insert nose radii up to 1,6mm without modification.
For tool body modification instructions, see page J16.
Weldon Shanks
order number catalogue number D1 D L L2 Ap1 max Z
max
ramp
angle
coolant
supply max RPM kg
5988102 VSM17D025Z02B25XD17 25 25 90 33 16,3 2 8.8 Yes 41800 0,26
5988136 VSM17D032Z02B32XD17 32 32 100 39 16,3 2 5.7 Yes 34700 0,49
5988103 VSM17D032Z03B32XD17 32 32 100 39 16,3 3 5.7 Yes 34700 0,48
5988137 VSM17D040Z03B40XD17 40 40 110 39 16,2 3 4.0 Yes 29800 0,88
5988104 VSM17D040Z04B40XD17 40 40 110 39 16,2 4 4.0 Yes 29800 0,87
Shoulder Mills
WID_Master16_IndexableMilling_ShoulderMills_J020_J021_Metric_REBRAND.indd 21 10/29/15 2:05 PM
J22
LViWID M 16 I d bl Milli Sh ld Mill J022 J023 M i REBRANDO b 14 20159 46AM
widia.com
Victory™ Shoulder Mills • VSM17™ Series
Cylindrical End Mills
Spare Parts
insert
screw Nm wrench
191.725 3,5 170.025
NOTE: Standard milling cutters will accept insert nose radii up to 1,6mm without modification.
For tool body modification instructions, see page J16.
Cylindrical End Mills
order number catalogue number D1 D L L2 Ap1 max Z
max
ramp
angle
coolant
supply max RPM kg
5988055 VSM17D025Z02A25XD17L110 25 25 110 44 16,3 2 8.8 Yes 41800 0,32
5988056 VSM17D025Z02A25XD17L170 25 25 170 44 16,3 2 8.8 Yes 41800 0,54
5988107 VSM17D032Z02A32XD17L120 32 32 120 50 16,3 2 5.7 Yes 34700 0,60
5988057 VSM17D032Z03A32XD17L120 32 32 120 50 16,3 3 5.7 Yes 34700 0,60
5988109 VSM17D040Z03A32XD17L130 40 32 130 50 16,2 3 4.0 Yes 29800 0,77
5988059 VSM17D040Z04A32XD17L130 40 32 130 50 16,2 4 4.0 Yes 29800 0,77
Shoulder Mills
WID_Master16_IndexableMilling_ShoulderMills_J022_J023_Metric_REBRAND.indd 22 10/29/15 2:05 PM
J23
LViWID M 16 I d bl Milli Sh ld Mill J022 J023 M i REBRANDO b 1420159 46AM
widia.com
Victory™ Shoulder Mills • VSM17™ Series
Cylindrical End Mills • Long Shank
Spare Parts
insert
screw Nm wrench
191.725 3,5 170.025
NOTE: Standard milling cutters will accept insert nose radii up to 1,6mm without modification.
For tool body modification instructions, see page J16.
Cylindrical End Mills • Long Shank
order number catalogue number D1 D L L2 Ap1 max Z
max
ramp
angle
coolant
supply max RPM kg
5988108 VSM17D032Z02A32XD17L210 32 32 210 50 16,3 2 5.7 Yes 34700 1,14
5988058 VSM17D032Z03A32XD17L210 32 32 210 50 16,3 3 5.7 Yes 34700 1,13
5988110 VSM17D040Z03A32XD17L250 40 32 250 50 16,2 3 4.0 Yes 29800 1,49
5988060 VSM17D040Z04A32XD17L250 40 32 250 50 16,2 4 4.0 Yes 29800 1,49
Shoulder Mills
WID_Master16_IndexableMilling_ShoulderMills_J022_J023_Metric_REBRAND.indd 23 10/29/15 2:05 PM
J24
LViWID M 16 I d bl Milli Sh ld Mill J024 J025 M i REBRANDO b 14 20159 46AM
widia.com
Victory™ Shoulder Mills • VSM17™ Series
Shell Mills
Spare Parts
D1
insert
screw Nm wrench
socket-head
cap screw
socket-head cap screw
with coolant groove
coolant lock
screw assembly
coolant
lock screw
coolant
cap
40,0 191.725 3,5 170.025 MS1294 MS1294CG – – –
50,0 191.725 3,5 170.025 MS1234 MS1294CG – – –
50,0 191.725 3,5 170.025 MS1234 MS1234CG – – –
63,0 191.725 3,5 170.025 MS1234 MS1234CG – – –
80,0 191.725 3,5 170.025 MS2038 MS2038CG – – –
100,0 191.725 3,5 170.025 – – MS2195C – –
125,0 191.725 3,5 170.025 – – MS2187C – –
160,0 191.725 3,5 170.025 – – – 12146107000 12146111100
NOTE: Standard milling cutters will accept insert nose radii up to 1,6mm without modification.
For tool body modification instructions, see page J16.
Shell Mills
order number catalogue number D1 D D6 L Ap1 max Z
max
ramp
angle
coolant
supply max RPM kg
5988094 VSM17D040Z04S16XD17 40 16 37 40 16,2 4 4.0 Yes 29800 0,19
5988095 VSM17D050Z04S22XD17 50 22 45 40 16,1 4 3.0 Yes 25800 0,28
5988096 VSM17D050Z05S22XD17 50 22 45 40 16,1 5 3.0 Yes 25800 0,29
5988134 VSM17D050Z06S22XD17 50 22 45 40 16,1 6 3.0 Yes 25800 0,28
5988097 VSM17D063Z05S22XD17 63 22 50 40 16,0 5 2.1 Yes 22400 0,45
5988135 VSM17D063Z06S22XD17 63 22 50 40 16,0 6 2.1 Yes 22400 0,45
5988098 VSM17D080Z06S27XD17 80 27 60 50 15,9 6 1.6 Yes 19500 0,98
5988133 VSM17D080Z07S27XD17 80 27 60 50 15,9 7 1.6 Yes 19500 0,96
5988099 VSM17D100Z08S32XD17 100 32 80 50 15,8 8 1.2 Yes 17200 1,63
5988100 VSM17D125Z09S40XD17 125 40 90 63 15,7 9 0.9 Yes 15200 2,94
5988101 VSM17D160Z12S40XD17 160 40 100 63 15,6 12 0.7 Yes 13300 3,66
Shoulder Mills
WID_Master16_IndexableMilling_ShoulderMills_J024_J025_Metric_REBRAND.indd 24 10/29/15 2:05 PM
J25
LViWID M 16 I d bl Milli Sh ld Mill J024 J025 M i REBRANDO b 1420159 46AM
widia.com
Victory™ Shoulder Mills • VSM17™ Series
Inserts
Insert Selection Guide
Material
Group
Light
Machining
General
Purpose
Heavy
Machining
Geometry Grade Geometry Grade Geometry Grade
P1–P2
.E..ML WP40PM
.S..MM WP40PM
.S..MH WP40PM
P3–P4
.E..ML WP35CM
.S..MM WP35CM
.S..MH WP35CM
P5–P6
.E..ML WP35CM
.S..MM WU35PM
.S..MH WP35CM
M1–M2
.E..ML WP25PM
.S..MM WP25PM
.S..MM WU35PM
M3
.E..ML WP35CM
.S..MM WP35CM
.S..MH WP35CM
K1–K2
.S..MM WK15CM
.S..MM WK15CM
.S..MH WK15CM
K3
.E..ML WP35CM
.S..MM WP35CM
.S..MH WP35CM
N1–N2
.F..ALP WN10HM
.F..ALP WN25PM
.F..ALP WN25PM
N3
––
––
––
S1–S2
.S..MM WP25PM
.S..MM WU35PM
.S..MM WU35PM
S3
.S..MM WU35PM
.S..MM WU35PM
.S..MM WU35PM
S4
.S..MM WP25PM
.S..MM WU35PM
.S..MM WU35PM
H1
––
––
––
Shoulder Mills
XDCT-ML
P
M
K
N
S
H
rst choice
alternate choice
XDCT-ML
catalogue number
cutting
edges L1 BS S W R¡
WK15CM
WN25PM
WP25PM
WP35CM
WP40PM
WU35PM
XDCT170404PEERML 2 19,15 2,62 4,90 9,60 0,40
–
–
5989010
–
–
–
XDCT170408PEERML 2 19,15 2,22 4,90 9,60 0,80
–
–
5988983
5988982
5988981
–
XDCT170412PEERML 2 19,16 1,82 4,90 9,60 1,20
–
–
5988988
5988987
5988986
–
XDCT170416PEERML 2 19,17 1,42 4,90 9,60 1,60
–
–
6001257
–
–
–
XDCT170420PEERML 2 19,17 1,01 4,90 9,60 2,00
–
–
6001255
–
–
–
XDCT170424PEERML 2 19,17 0,63 4,90 9,60 2,40
–
–
6001253
–
–
–
XDCT170432PEERML 2 18,85 — 4,88 9,59 3,20
–
–
6001251
–
–
–
XDCT170440PEERML 2 18,33 — 4,87 9,59 4,00
–
–
6001239
–
–
–
WID_Master16_IndexableMilling_ShoulderMills_J024_J025_Metric_REBRAND.indd 25 10/29/15 2:05 PM
J26
LViWID M 16 I d bl Milli Sh ld Mill J026 J027 M i REBRANDN b 12 20158 32AM
widia.com
Victory™ Shoulder Mills • VSM17™ Series
Inserts
Shoulder Mills
XDCT-ALP
P
M
K
N
S
H
XDCT-ALP
catalogue number
cutting
edges L1 BS S W R¡
WN10HM
WN25PM
XDCT170404PEFRALP 2 19,15 2,62 4,90 9,60 0,40
6007341
6007220
XDCT170408PEFRALP 2 19,15 2,22 4,90 9,60 0,80
6007345
6007344
XDCT170412PEFRALP 2 19,16 1,82 4,90 9,60 1,20
6007342
6001537
XDCT170416PEFRALP 2 19,17 1,42 4,90 9,60 1,60
–
6001256
XDCT170420PEFRALP 2 19,17 1,01 4,90 9,60 2,00
–
6001254
XDCT170424PEFRALP 2 19,17 0,63 4,90 9,60 2,40
–
6001252
XDCT170432PEFRALP 2 18,85 — 4,88 9,59 3,20
–
6001240
XDCT170440PEFRALP 2 18,33 — 4,87 9,59 4,00
–
6001238
rst choice
alternate choice
WID_Master16_IndexableMilling_ShoulderMills_J026_J027_Metric_REBRAND.indd 26 11/12/15 8:57 AM
J27
LViWID M 16 I d bl Milli Sh ld Mill J026 J027 M i REBRANDN b 1220158 32AM
widia.com
Victory™ Shoulder Mills • VSM17™ Series
Inserts
XDPT-MM
Shoulder Mills
XDPT-MH
XDPT-MM
catalogue number
cutting
edges L1 BS S W R¡
WK15CM
WN25PM
WP25PM
WP35CM
WP40PM
WU35PM
XDPT170404PESRMM 2 19,15 2,52 4,90 9,60 0,40
–
–
–
–
5987689
5987690
XDPT170408PESRMM 2 19,15 2,15 4,90 9,60 0,80
5987948
–
5987949
5987947
5987946
5987950
XDPT170412PESRMM 2 19,16 1,77 4,90 9,60 1,20
5988138
–
5988151
5988140
5988139
5988152
XDPT170416PESRMM 2 19,17 1,38 4,90 9,60 1,60
5988153
–
5988155
5988156
5988154
–
XDPT170420PESRMM 2 19,17 0,99 4,90 9,60 2,00
–
–
5988158
5988160
5988159
–
XDPT170424PESRMM 2 19,17 0,62 4,90 9,60 2,40
–
–
5988203
–
5988202
–
XDPT170432PESRMM 2 18,85 — 4,89 9,59 3,20
–
–
5988206
5988204
5988205
–
XDPT170440PESRMM 2 18,33 — 4,87 9,59 4,00
–
–
5988970
–
5988969
–
rst choice
alternate choice
XDPT-MH
catalogue number
cutting
edges L1 BS S W R¡
WK15CM
WN25PM
WP25PM
WP35CM
WP40PM
WU35PM
XDPT170408PESRMH 2 19,15 2,10 4,91 9,60 0,80
5989053
–
–
5989054
5989052
–
XDPT170412PESRMH 2 19,16 1,73 4,91 9,60 1,20
5991817
–
–
5991816
5991815
–
P
M
K
N
S
H
WID_Master16_IndexableMilling_ShoulderMills_J026_J027_Metric_REBRAND.indd 27 11/12/15 8:57 AM
J28
LViWID M 16 I d bl Milli Sh ld Mill J028 J029 M i REBRANDD b 17 20158 08AM
widia.com
Victory™ Shoulder Mills • VSM17™ Series
Recommended Starting Speeds
NOTE: FIRST choice starting speeds are in bold type.
As the average chip thickness increases, the speed should be decreased.
Shoulder Mills
Recommended Starting Speeds [m/min]
Recommended Starting Feeds
NOTE: Use “Light Machining” value as starting feed rate.
Recommended Starting Feeds [mm] Light
Machining
General
Purpose
Heavy
Machining
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
.F..ALP 0,12
0,23
0,58 0,08
0,17
0,42 0,06
0,13
0,31 0,06
0,11
0,27 0,05
0,10
0,25 .F..ALP
.E..ML 0,16
0,35
0,70 0,12
0,25
0,50 0,09
0,19
0,38 0,08
0,16
0,33 0,07
0,15
0,30 .E..ML
.S..MM 0,16
0,46
0,87 0,12
0,33
0,63 0,09
0,25
0,47 0,08
0,22
0,41 0,07
0,20
0,38 .S..MM
.S..MH 0,23
0,58
0,93 0,17
0,42
0,67 0,13
0,31
0,50 0,11
0,27
0,44 0,10
0,25
0,40 .S..MH
Material
Group WK15CM WN25PM WP25PM WP35CM WP40PM WN10HM WU35PM
P
1
–
–
––
–
– 330
285
270 455
395
370 295
260
245 –
–
– 260
230
215
2
–
–
––
–
– 275
240
200 280
255
230 250
215
180 –
–
– 220
190
160
3
–
–
––
–
– 255
215
175 255
230
205 230
195
160 –
–
– 200
170
140
4
–
–
––
–
– 225
185
150 190
175
160 205
170
135 –
–
– 180
150
120
5
–
–
––
–
– 185
170
150 260
230
210 170
155
135 –
–
– 150
135
120
6
–
–
––
–
– 165
125
100 160
135
110 150
115
90 –
–
– 130
100
80
M
1
–
–
––
–
– 205
180
165 205
185
155 195
170
155 –
–
– 170
150
135
2
–
–
––
–
– 185
160
130 185
160
140 175
150
125 –
–
– 155
130
110
3
–
–
––
–
– 140
120
95 145
130
115 130
115
90 –
–
– 115
100
80
K
1
420
385
340 –
–
– 230
205
185 295
265
240 –
–
– 190
170
150 –
–
–
2
335
295
275 –
–
– 180
160
150 235
210
190 –
–
––
–
––
–
–
3
280
250
230 –
–
– 150
135
120 195
175
160 –
–
––
–
––
–
–
N
1
–
–
– 1075
945
875 –
–
––
–
––
–
– 2000
1200
1000 –
–
–
2
–
–
– 945
875
760 –
–
––
–
––
–
– 1365
815
665 –
–
–
3
–
–
– 945
875
760 –
–
––
–
––
–
– 800
500
400 –
–
–
S
1
–
–
––
–
–40
35
25 –
–
–40
35
30 –
–
–35
30
25
2
–
–
––
–
–40
35
25 –
–
–40
35
30 –
–
–35
30
25
3
–
–
––
–
–50
40
25 –
–
–50
40
30 –
–
–45
35
25
4
–
–
––
–
–70
50
35 66
50
33 65
50
35 –
–
–60
45
30
H
1
–
–
––
–
– 120
90
70 –
–
––
–
––
–
––
–
–
2
–
–
––
–
––
–
––
–
––
–
––
–
––
–
–
3
–
–
––
–
––
–
––
–
––
–
––
–
––
–
–
WID_Master16_IndexableMilling_ShoulderMills_J028_J029_Metric_REBRAND.indd 28 12/17/15 8:08 AM
J29
LViWID M 16 I d bl Milli Sh ld Mill J028 J029 M i REBRANDD b 1720158 08AM
widia.com
VSM17 Starter Kits • Metric
Order one of our starter kits and test the performance of our new VSM17 platform. The kits are set up
to serve the majority of shoulder milling applications, delivered with a cutter body and the latest WIDIA™
Victory™ grades. Detailed order information can be found in the table below.
order
number catalogue number
diameter
D1 (mm)
cutter body
type
material
group
content
cutter qty inserts qty grade
Z
(Pocket
Seats)
6049187 VSM17KITCD025Z2WP40PM 25 CYLINDRICAL PVSM17D025Z02A25XD17L110 1XDPT170408PESRMM 10 WP40PM 2
6049185 VSM17KITSW025Z2WP40PM 25 SCREW ON PVSM17D025Z02M12XD17 1XDPT170408PESRMM 10 WP40PM 2
6049186 VSM17KITWD025Z2WP40PM 25 WELDON PVSM17D025Z02B25XD17 1XDPT170408PESRMM 10 WP40PM 2
6049190 VSM17KITCD032Z3WP40PM 32 CYLINDRICAL PVSM17D032Z03A32XD17L120 1XDPT170408PESRMM 10 WP40PM 3
6049188 VSM17KITSW032Z3WP40PM 32 SCREW ON PVSM17D032Z03M16XD17 1XDPT170408PESRMM 10 WP40PM 3
6049189 VSM17KITWD032Z3WP40PM 32 WELDON PVSM17D032Z03B32XD17 1XDPT170408PESRMM 10 WP40PM 3
6049311 VSM17KITCD032Z2WP40PM 32 CYLINDRICAL PVSM17D032Z02A32XD17L120 1XDPT170408PESRMM 10 WP40PM 2
6049313 VSM17KITCD040Z4WP40PM 40 CYLINDRICAL PVSM17D040Z04A32XD17L130 1XDPT170408PESRMM 10 WP40PM 4
6049312 VSM17KITSD040Z4WP40PM 40 SHELL MILL PVSM17D040Z04S16XD17 1XDPT170408PESRMM 10 WP40PM 4
6049314 VSM17KITSD050Z4WP40PM 50 SHELL MILL PVSM17D050Z04S22XD17 1XDPT170408PESRMM 10 WP40PM 4
6049315 VSM17KITSD050Z5WP40PM 50 SHELL MILL PVSM17D050Z05S22XD17 1XDPT170408PESRMM 10 WP40PM 5
6049316 VSM17KITSD063Z5WP40PM 63 SHELL MILL PVSM17D063Z05S22XD17 1XDPT170408PESRMM 10 WP40PM 5
6049317 VSM17KITSD080Z6WP40PM 80 SHELL MILL PVSM17D080Z06S27XD17 1XDPT170408PESRMM 10 WP40PM 6
6049318 VSM17KITSD100Z8WP40PM 100 SHELL MILL PVSM17D100Z08S32XD17 1XDPT170408PESRMM 10 WP40PM 8
6049321 VSM17KITCD025Z2WK15CM 25 CYLINDRICAL KVSM17D025Z02A25XD17L110 1XDPT170408PESRMM 10 WK15CM 2
6049319 VSM17KITSW025Z2WK15CM 25 SCREW ON KVSM17D025Z02M12XD17 1XDPT170408PESRMM 10 WK15CM 2
6049320 VSM17KITWD025Z2WK15CM 25 WELDON KVSM17D025Z02B25XD17 1XDPT170408PESRMM 10 WK15CM 2
6049324 VSM17KITCD032Z3WK15CM 32 CYLINDRICAL KVSM17D032Z03A32XD17L120 1XDPT170408PESRMM 10 WK15CM 3
6049322 VSM17KITSW032Z3WK15CM 32 SCREW ON KVSM17D032Z03M16XD17 1XDPT170408PESRMM 10 WK15CM 3
6049323 VSM17KITWD032Z3WK15CM 32 WELDON KVSM17D032Z03B32XD17 1XDPT170408PESRMM 10 WK15CM 3
6049325 VSM17KITCD032Z2WK15CM 32 CYLINDRICAL KVSM17D032Z02A32XD17L120 1XDPT170408PESRMM 10 WK15CM 2
6049327 VSM17KITCD040Z4WK15CM 40 CYLINDRICAL KVSM17D040Z04A32XD17L130 1XDPT170408PESRMM 10 WK15CM 4
6049326 VSM17KITSD040Z4WK15CM 40 SHELL MILL KVSM17D040Z04S16XD17 1XDPT170408PESRMM 10 WK15CM 4
6049328 VSM17KITSD050Z4WK15CM 50 SHELL MILL KVSM17D050Z04S22XD17 1XDPT170408PESRMM 10 WK15CM 4
6049329 VSM17KITSD050Z5WK15CM 50 SHELL MILL KVSM17D050Z05S22XD17 1XDPT170408PESRMM 10 WK15CM 5
6049330 VSM17KITSD063Z5WK15CM 63 SHELL MILL KVSM17D063Z05S22XD17 1XDPT170408PESRMM 10 WK15CM 5
6049331 VSM17KITSD080Z6WK15CM 80 SHELL MILL KVSM17D080Z06S27XD17 1XDPT170408PESRMM 10 WK15CM 6
6049332 VSM17KITSD100Z8WK15CM 100 SHELL MILL KVSM17D100Z08S32XD17 1XDPT170408PESRMM 10 WK15CM 8
Victory™ Shoulder Mill 17™ Starter Kits
Order a VSM17™ Kit to achieve true 90°
high-performance shoulder milling!
WID_Master16_IndexableMilling_ShoulderMills_J028_J029_Metric_REBRAND.indd 29 12/17/15 8:09 AM
J30
LViWID M 16 I d bl MIlli Sh ld Mill J030 J031 M i REBRANDO b 30 20159 52AM
widia.com
-ML
PMS
First choice for
stainless steel.
Lower cutting forces.
Geometry Strengthening
Finishing Capabilities/Reduced Cutting Force
-MM
PMKS
First choice
especially when
machining steels.
Two geometries
for all material groups
in shoulder milling applications.
-MH
PK
First choice for cast
iron, also recommended for
heavy applications.
VSM490-15
WIDIA™ Victory™ Shoulder Milling Series (VSM series) is specially engineered to achieve excellent surface quality as well
as higher material removal rates in shoulder milling applications. The VSM490 series, with its unique design, enables the
tool to be applied in multiple passes (stepping down) with outstanding results. VSM490-15 is applicable in a wide range of
workpiece materials: steel, cast iron, stainless steel, and titanium, from roughing to fi nishing applications.
Double-Sided Shoulder Mill •
VSM490™-15
• Double-sided strong insert with 4 cutting edges.
• High positive geometry for lower cutting forces.
• Superior wall and surface fi nish capabilities.
State-of-the-art stepping down
capabilities due to its ultimate
design concept.
Cutter bodies with effective
internal coolant supply.
Multiple corner
nose radii available.
Up to 15mm (0.59")
depth-of-cut
capabilities.
WID_Master16_IndexableMIlling_ShoulderMills_J030_J031_Metric_REBRAND.indd 30 10/30/15 1:03 PM
J31
LViWID M 16 I d bl MIlli Sh ld Mill J030 J031 M i REBRANDO b 3020159 52AM
widia.com
90° Shoulder Mills
VSM490™-15 • Unbeatable Performance in Shoulder Milling
• “Stepless” solution.
• No mismatch when machining
walls in different steps.
VSM490-15 minimises the marks left. By
increasing wall quality and avoiding a second
tool, productivity increases signifi cantly.
VSM490-15 • Wall Quality
Traditional tools are designed to
achieve a 90° wall, but exhibit poor
performance when machining walls
in multiple passes.
Competitor Tool • Wall Quality
[
Innovative cutting geometry
provides superior wall
and surface fi nish.
Integrated wiper facet for
excellent fl oor fi nishing.
VSM490™-15
Max depth of cut: 15mm
Lead angle: 90°
Indexes per insert: 4
Diameter: 25–160mm
P
M
K
S
Pages: J32–J40
WID_Master16_IndexableMIlling_ShoulderMills_J030_J031_Metric_REBRAND.indd 31 10/30/15 1:03 PM
J32
LViWID M 16 I d bl Milli Sh ld Mill J032 J033 M i REBRANDO b 14 20159 48AM
widia.com
Victory™ Shoulder Mills • VSM490™-15 Series
Screw-On End Mills
Spare Parts
insert
screw Nm
Torx Plus
driver
MS-2071 3,5 DT15IP
Screw-On End Mills
order number catalogue number D1 D DPM G3X L2 WF Ap1 max Z kg max RPM
5873211 VSM490D025Z02M12XN15 25 21 13 M12 32 17 15,0 2 0,18 26700
5873212 VSM490D032Z03M16XN15 32 29 17 M16 40 24 15,0 3 0,18 22000
5873213 VSM490D032Z04M16XN15 32 29 17 M16 40 24 15,0 4 0,18 22000
5873214 VSM490D035Z04M16XN15 35 29 17 M16 40 24 15,0 4 0,19 20600
Shoulder Mills
DPMWF
G3X D
L2
D1
90º
A
p1 max
• Superior wall and surface nish capabilities.
• “Stepless” solution. True 90° to run precise
applications in multiple axial passes.
• Strong concept to run up to 15mm (.590") depth of cut.
• Effective internal coolant feature, reaching the cutting
edge precisely.
WID_Master16_IndexableMilling_ShoulderMills_J032_J033_Metric_REBRAND.indd 32 10/29/15 2:06 PM
J33
LViWID M 16 I d bl Milli Sh ld Mill J032 J033 M i REBRANDO b 1420159 48AM
widia.com
Victory™ Shoulder Mills • VSM490™-15 Series
Weldon® Shanks
Spare Parts
insert
screw Nm
Torx Plus
driver
MS-2071 3,5 DT15IP
Weldon Shanks
NOTE: Weldon type not recommended for finishing operations.
order number catalogue number D1 D L L2 Ap1 max Z kg max RPM
5710285 VSM490D025Z02B25XN15 25 25 89 32 15,0 2 0,28 26700
5710286 VSM490D032Z03B32XN15 32 32 111 50 15,0 3 0,58 22000
5873215 VSM490D040Z03B32XN15 40 32 111 50 15,0 3 0,65 18800
Shoulder Mills
• Superior wall and surface nish capabilities.
• “Stepless” solution. True 90° to run precise
applications in multiple axial passes.
• Strong concept to run up to 15mm (.590") depth of cut.
• Effective internal coolant feature, reaching the cutting
edge precisely.
WID_Master16_IndexableMilling_ShoulderMills_J032_J033_Metric_REBRAND.indd 33 10/29/15 2:06 PM
J34
LViWID M 16 I d bl Milli Sh ld Mill J034 J035 M i REBRANDO b 14 20159 48AM
widia.com
Victory™ Shoulder Mills • VSM490™-15 Series
Cylindrical End Mills
Spare Parts
insert
screw Nm
Torx Plus
driver
MS-2071 3,5 DT15IP
Cylindrical End Mills
order number catalogue number D1 D L L2 Ap1 max Z kg max RPM
5873216 VSM490D025Z02A25XN15L100 25 25 100 43 15,0 2 0,32 26700
5710287 VSM490D025Z02A25XN15L170 25 25 170 43 15,0 2 0,59 26700
5873217 VSM490D032Z03A32XN15L110 32 32 110 49 15,0 3 0,59 22000
5710288 VSM490D032Z03A32XN15L200 32 32 200 50 15,0 3 1,14 22000
5873218 VSM490D032Z04A32XN15L110 32 32 110 49 15,0 4 0,58 22000
5873219 VSM490D032Z04A32XN15L200 32 32 200 50 15,0 4 1,14 22000
Shoulder Mills
• Superior wall and surface nish capabilities.
• “Stepless” solution. True 90° to run precise
applications in multiple axial passes.
• Strong concept to run up to 15mm (.590") depth of cut.
• Effective internal coolant feature, reaching the cutting
edge precisely.
WID_Master16_IndexableMilling_ShoulderMills_J034_J035_Metric_REBRAND.indd 34 10/29/15 2:06 PM
J35
LViWID M 16 I d bl Milli Sh ld Mill J034 J035 M i REBRANDO b 1420159 48AM
widia.com
Victory™ Shoulder Mills • VSM490™-15 Series
Shell Mills
Spare Parts
D1
insert
screw Nm
Torx Plus
driver
socket-head
cap screw
socket-head cap screw
with coolant groove
coolant lock
screw assembly
coolant
lock screw
coolant
shower plate
40 MS-2071 3,5 DT15IP 125.825 MS1294CG — — —
50 MS-2071 3,5 DT15IP 125.025 MS1234CG — — —
63 MS-2071 3,5 DT15IP 125.025 MS1234CG — — —
80 MS-2071 3,5 DT15IP 125.230 MS2038CG — — —
100 MS-2071 3,5 DT15IP — — MS2189C — —
125 MS-2071 3,5 DT15IP — — MS2187C — —
160 MS-2071 3,5 DT15IP — — — 420.200 470.233
Shell Mills
order number catalogue number D1 D D6 L Ap1 max Z kg max RPM
5710289 VSM490D040Z04S16XN15 40 16 37 40 15,0 4 0,20 18800
5710520 VSM490D040Z05S16XN15 40 16 37 40 15,0 5 0,19 18800
5873221 VSM490D050Z04S22XN15 50 22 42 40 15,0 4 0,28 16300
5710521 VSM490D050Z05S22XN15 50 22 42 40 15,0 5 0,28 16300
5710522 VSM490D050Z06S22XN15 50 22 42 40 15,0 6 0,28 16300
5873222 VSM490D063Z05S22XN15 63 22 50 40 15,0 5 0,50 14200
5710523 VSM490D063Z06S22XN15 63 22 50 40 15,0 6 0,49 14200
5710524 VSM490D063Z07S22XN15 63 22 50 40 15,0 7 0,48 14200
5873223 VSM490D080Z05S27XN15 80 27 60 50 15,0 5 1,03 12300
5710525 VSM490D080Z07S27XN15 80 27 60 50 15,0 7 1,03 12300
5873224 VSM490D080Z09S27XN15 80 27 60 50 15,0 9 1,04 12300
5710526 VSM490D100Z08S32XN15 100 32 80 50 15,0 8 1,61 10900
5873225 VSM490D100Z11S32XN15 100 32 80 50 15,0 11 1,64 10900
5873226 VSM490D125Z09S40XN15 125 40 90 63 15,0 9 2,96 9600
5873227 VSM490D125Z12S40XN15 125 40 90 63 15,0 12 3,11 9600
5873228 VSM490D160Z12S40XN15 160 40 110 63 15,0 12 4,80 8400
• Superior wall and surface nish capabilities.
• “Stepless” solution. True 90° to run precise
applications in multiple axial passes.
• Strong concept to run up to 15mm (.590") depth of cut.
• Effective internal coolant feature, reaching the cutting
edge precisely.
Shoulder Mills
NOTE: Socket-head cap screw with coolant groove and coolant lock screw assembly must be ordered separately.
WID_Master16_IndexableMilling_ShoulderMills_J034_J035_Metric_REBRAND.indd 35 10/29/15 2:06 PM
J36
LViWID M 16 I d bl Milli Sh ld Mill J036 J037 M i REBRANDN b 10 201512 33PM
widia.com
Victory™ Shoulder Mills • VSM490™-15 Series
Inserts
Shoulder Mills
Insert Selection Guide
Material
Group
Light
Machining
General
Purpose
Heavy
Machining
Geometry Grade Geometry Grade Geometry Grade
P1–P2
XNGU-ML WP40PM
XNPU-ML WP40PM
XNPU-MM WP40PM
P3–P4
XNGU-ML WP25PM
XNPU-MM WP35CM
XNPU-MM WP40PM
P5–P6
XNGU-MM WP25PM
XNPU-MM WP35CM
XNPU-MM WP35CM
M1–M2
XNGU-ML WP25PM
XNGU-ML WU35PM
XNGU-MM WU35PM
M3
XNGU-ML WP25PM
XNGU-ML WU35PM
XNGU-MM WU35PM
K1–K2
XNGU-MH WK15CM
XNGU-MH WK15CM
XNGU-MH WP35CM
K3
XNGU-MH WK15PM
XNGU-MH WK15PM
XNGU-MH WP40PM
N1–N2
––
––
––
N3
––
––
––
S1–S2
XNGU-ML WP25PM
XNGU-ML WU35PM
XNGU-MM WU35PM
S3
XNGU-ML WP25PM
XNGU-ML WU35PM
XNGU-MM WU35PM
S4
XNGU-ML WU35PM
XNGU-ML WU35PM
XNPU-MM WU35PM
H1
––
––
––
P
M
K
N
S
H
• -ML geometry is the rst choice for machining stainless
steel. With reduced cutting forces, this is recommended
for improved wall nishing capabilities in steels.
rst choice
alternate choice
XNGU-ML
XNGU-ML
XNGU-ML • Precision Finishing
catalogue number
cutting
edges L1 S W BS R¡hm
WK15PM
WP25PM
WU35PM
WP40PM
WK15CM
WP35CM
XNGU15T604ERML 4 16,20 6,88 10,00 2,20 0,40 0,08
–
5890821
5890823
5890822
–
–
XNGU15T608ERML 4 16,20 6,88 10,00 1,80 0,80 0,08
–
5873481
5873483
5873482
–
–
Back View
WID_Master16_IndexableMilling_ShoulderMills_J036_J037_Metric_REBRAND.indd 36 11/10/15 2:19 PM
widia.com J37
LViWID M 16 I d bl Milli Sh ld Mill J036 J037 M i REBRANDN b 10201512 33PM
Victory™ Shoulder Mills • VSM490™-15 Series
Indexable Inserts
XNGU-MM • Precision Finishing
catalogue number
cutting
edges L1 S W BS R¡hm
WK15PM
WP25PM
WU35PM
WP40PM
WK15CM
WP35CM
XNGU15T604SRMM 4 16,20 6,88 10,00 2,20 0,40 0,10
–
5949204
5949206
5949205
–
–
XNGU15T608SRMM 4 16,20 6,88 10,00 1,90 0,80 0,10
–
5710527
5710529
5710528
–
–
rst choice
alternate choice
XNGU-MM
Shoulder Mills
XNPU-ML • Utility Roughing
catalogue number
cutting
edges L1 S W BS R¡hm
WK15PM
WP25PM
WU35PM
WP40PM
WK15CM
WP35CM
XNPU15T608ERML 4 16,10 6,88 10,00 1,90 0,80 0,08
–
5883097
5883099
5883098
–
–
XNPU-MM • Utility Roughing
catalogue number
cutting
edges L1 S W BS R¡hm
WK15PM
WP25PM
WU35PM
WP40PM
WK15CM
WP35CM
XNPU15T608SRMM 4 16,10 6,88 10,00 1,90 0,80 0,10
5873419
5873415
5873417
5873416
5873420
5873418
XNPU15T612SRMM 4 16,10 6,88 10,00 1,50 1,20 0,10
5890762
5890728
5890730
5890729
5890763
5890761
XNPU15T616SRMM 4 16,10 6,88 10,00 1,10 1,60 0,10
5883521
5883447
5883449
5883448
5883522
5883450
• -ML geometry is the rst choice for machining stainless
steel. With reduced cutting forces, this is recommended
for improved wall nishing capabilities in steels.
• -MM is the universal geometry for VSM490-15.
First choice when machining steel, as well as stainless
steel and high-temp alloys in heavy applications.
• -MH geometry is the rst choice for cast iron machining
in the medium and heavy applications.
Back View
XNGU-MH • Utility Roughing
catalogue number
cutting
edges L1 S W BS R¡
WK15PM
WP25PM
WU35PM
WP40PM
WK15CM
WP35CM
XNGU15T608SRMH 4 16,20 6,88 10,00 1,80 0,80
6003724
6003570
6003722
6003721
6003725
6003723
XNGU15T616SRMH 4 16,20 6,88 10,00 1,00 1,60
6030378
6030376
–
–
6030380
6030377
P
M
K
N
S
H
XNPU-MM XNPU-ML
XNGU-ML XNGU-MH
WID_Master16_IndexableMilling_ShoulderMills_J036_J037_Metric_REBRAND.indd 37 11/10/15 2:19 PM
J38
LViWID M 16 I d bl Milli Sh ld Mill J038 J039 M i REBRANDN b 4 20159 14AM
widia.com
Victory™ Shoulder Mills • VSM490™-15 Series
Recommended Starting Speeds
Shoulder Mills
Recommended Starting Speeds [m/min]
Material
Group WK15PM WP25PM WU35PM WP40PM WK15CM WP35CM
P
1––– 330 285 270 260 230 215 300 260 250 – –– 455 395 370
2––– 275 240 200 220 190 160 250 220 180 – –– 280 255 230
3––– 255 215 175 200 170 140 230 200 160 – –– 255 230 205
4––– 225 185 150 180 150 120 210 170 140 – –– 190 175 160
5––– 185 170 150 150 135 120 170 160 140 – –– 260 230 210
6––– 165 125 100 130 100 80 150 120 90 – –– 160 135 110
M
1––– 205 180 165 170 150 135 200 170 160 – –– 205 185 155
2––– 185 160 130 155 130 110 180 150 130 – –– 185 160 140
3––– 140 120 95 115 100 80 130 120 90 – –– 145 130 115
K
1270 245 215 230 205 185 – ––––– 420 385 340 295 265 240
2210 190 175 180 160 150 – ––––– 335 295 275 235 210 190
3175 160 145 150 135 120 – ––––– 280 250 230 195 175 160
N1–2 ––––––––––––––––––
3––––––––––––––––––
S
1–––4035 25 35 30 25 40 40 30 – –––––
2–––4035 25 35 30 25 40 40 30 – –––––
3–––5040 25 45 35 25 50 40 30 – –––––
4–––7050 35 60 45 30 70 50 40 – –––––
H1––––––––––––––––––
NOTE: FIRST choice starting speeds are in bold type.
As the average chip thickness increases, the speed should be decreased.
Recommended Starting Feeds [mm]
NOTE: Use “Light Machining” values as starting feed rate.
Light
Machining
General
Purpose
Heavy
Machining
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
XN.U-ML 0,17
0,29
0,46 0,13
0,21
0,33 0,09
0,16
0,25 0,08
0,14
0,22 0,08
0,13
0,20 XN.U-ML
XN.U-MM 0,21
0,39
0,58 0,15
0,28
0,42 0,11
0,21
0,31 0,10
0,19
0,27 0,09
0,17
0,25 XN.U-MM
XNGU-MH 0,23
0,45
0,70 0,17
0,33
0,50 0,13
0,24
0,38 0,11
0,21
0,33 0,10
0,20
0,30 XNGU-MH
Recommended Starting Feeds
WID_Master16_IndexableMilling_ShoulderMills_J038_J039_Metric_REBRAND.indd 38 11/20/15 2:58 PM
J39
LViWID M 16 I d bl Milli Sh ld Mill J038 J039 M i REBRANDN b 420159 14AM
widia.com
VSM490-15 Starter Kits • Metric
Order one of our starter kits and test the performance of our new VSM490-15 platform. The kits are
set up to serve the majority of shoulder milling applications and workpiece materials, delivered with
a cutter body as well as 20 inserts from a premium WIDIA™ grade. Detailed order information can
be found in the table below.
order
number
catalogue
number
cutter
diameter/
fl utes
cutter
body type
material
group
application
range
content
cutter qty inserts grade qty
5966234 VSM490KITC-
D25Z02WP40PM 25z2 CYLINDRICAL P¢¢ VSM490D025Z02A25XN15L170 1XNPU15T608SRMM WP40PM 20
5966235 VSM490KITC-
D32Z03WP40PM 32z3 CYLINDRICAL P¢¢ VSM490D032Z03A32XN15L200 1XNPU15T608SRMM WP40PM 20
5966236 VSM490KITS-
D40Z04WP40PM 40z4 SHELL MILL P¢¢ VSM490D040Z04S16XN15 1XNPU15T608SRMM WP40PM 20
5966237 VSM490KITS-
D50Z05WP40PM 50z5 SHELL MILL P¢¢ VSM490D050Z05S22XN15 1XNPU15T608SRMM WP40PM 20
5966238 VSM490KITS-
D50Z06WP40PM 50z6 SHELL MILL P¢¢ VSM490D050Z06S22XN15 1XNPU15T608SRMM WP40PM 20
5966239 VSM490KITS-
D63Z06WP40PM 63z6 SHELL MILL P¢¢ VSM490D063Z06S22XN15 1XNPU15T608SRMM WP40PM 20
5966240 VSM490KITS-
D80Z07WP40PM 80z7 SHELL MILL P¢¢ VSM490D080Z07S27XN15 1XNPU15T608SRMM WP40PM 20
5966251 VSM490KITS-
D100Z08WP40PM 100z8 SHELL MILL P¢¢¢ VSM490D100Z08S32XN15 1XNPU15T608SRMM WP40PM 20
¢ Heavy/Roughing
¢¢ Medium
¢¢¢ Light Machining/Finishing
(continued)
VSM490-15 Starter Kits
Order a VSM490™ Kit and experience
the next level of shoulder milling!
WID_Master16_IndexableMilling_ShoulderMills_J038_J039_Metric_REBRAND.indd 39 11/20/15 2:58 PM
widia.com
J40
LViWID M 16 I d bl Milli Sh ld Mill J040 J041 M i REBRANDN b 10 20153 16PM
Victory™ Shoulder Milling • VSM490™-15 Series
VSM490-15 Starter Kits
order
number
catalogue
number
cutter
diameter/
flutes
cutter
body type
material
group
application
range
content
cutter qty inserts grade qty
5966252 VSM490KITC-
D25Z02WU35PM 25z2 CYLINDRICAL M+S ¢¢¢ VSM490D025Z02A25XN15L170 1XNGU15T608ERML WU35PM 20
5966253 VSM490KITC-
D32Z03WU35PM 32z3 CYLINDRICAL M+S ¢¢¢ VSM490D032Z03A32XN15L200 1XNGU15T608ERML WU35PM 20
5966255 VSM490KITS-
D40Z04WU35PM 40z4 SHELL MILL M+S ¢¢¢ VSM490D040Z04S16XN15 1XNGU15T608ERML WU35PM 20
5966256 VSM490KITS-
D50Z05WU35PM 50z5 SHELL MILL M+S ¢¢¢ VSM490D050Z05S22XN15 1XNGU15T608ERML WU35PM 20
5966257 VSM490KITS-
D50Z06WU35PM 50z6 SHELL MILL M+S ¢¢¢ VSM490D050Z06S22XN15 1XNGU15T608ERML WU35PM 20
5966258 VSM490KITS-
D63Z06WU35PM 63z6 SHELL MILL M+S ¢¢¢ VSM490D063Z06S22XN15 1XNGU15T608ERML WU35PM 20
5966259 VSM490KITS-
D80Z07WU35PM 80z7 SHELL MILL M+S ¢¢¢ VSM490D080Z07S27XN15 1XNGU15T608ERML WU35PM 20
5966260 VSM490KITC-
D25Z02WK15PM 25z2 CYLINDRICAL K¢VSM490D025Z02A25XN15L170 1XNPU15T608SRMM WK15PM 20
5966261 VSM490KITC-
D32Z03WK15PM 32z3 CYLINDRICAL K¢VSM490D032Z03A32XN15L200 1XNPU15T608SRMM WK15PM 20
5966262 VSM490KITS-
D40Z04WK15PM 40z4 SHELL MILL K¢VSM490D040Z04S16XN15 1XNPU15T608SRMM WK15PM 20
5966263 VSM490KITS-
D50Z05WK15PM 50z5 SHELL MILL K¢VSM490D050Z05S22XN15 1XNPU15T608SRMM WK15PM 20
5966264 VSM490KITS-
D50Z06WK15PM 50z6 SHELL MILL K¢VSM490D050Z06S22XN15 1XNPU15T608SRMM WK15PM 20
5966265 VSM490KITS-
D63Z07WK15PM 63z7 SHELL MILL K¢VSM490D063Z07S22XN15 1XNPU15T608SRMM WK15PM 20
5966266 VSM490KITS-
D80Z09WK15PM 80z9 SHELL MILL K¢VSM490D080Z09S27XN15 1XNPU15T608SRMM WK15PM 20
5966267 VSM490KITS-
D100Z11WK15PM 100z11 SHELL MILL K¢VSM490D100Z11S32XN15 1XNPU15T608SRMM WK15PM 20
(VSM490-15 Starter Kits • Metric — continued)
¢ Heavy/Roughing
¢¢ Medium
¢¢¢ Light Machining/Finishing
WID_Master16_IndexableMilling_ShoulderMills_J040_J041_Metric_REBRAND.indd 40 11/11/15 9:32 AM
We pay cash for used carbide tooling, including coated or non-coated carbide inserts,
drills, end mills, reamers, and taps, regardless of brand.
It’s good for the environment and a responsible way to dispose of scrap carbide.
Our carbide recycling program features:
• Easy-to-use web portal that shows what your scrap carbide is worth before sending it to us.
• Online forms that make it easy to ship scrap carbide to WIDIA.
• Green Box™ containers for safe, convenient shipping of scrap carbide to WIDIA.
• Cash payment for used carbide tooling.
Carbide Recycling
Good for You, Better for the Environment!
The WIDIA™ Carbide Recycling Program can turn accumulated
scrap carbide tooling in your shop into cash.
For more information, contact your local WIDIA
Authorised Distributor or visit widia.com/services.
WID_Master16_IndexableMilling_ShoulderMills_J040_J041_Metric_REBRAND.indd 41 11/11/15 9:32 AM
J42
LViWID M 16 I d bl MIlli Sh ld Mill J042 J043 M i REBRANDO b 30 20159 53AM
widia.com
Positive pockets and
geometry for free cutting action.
Strong tool design for
optimum insert support.
Accurate PSTS inserts offer
excellent shoulder fi nish.
Designed for optimal
chip evacuation.
M690
• New SDMX inserts — helical cutting edges for smooth cutting.
• Strong insert and tool design for maximum productivity.
• Four cutting edges enable excellent machining economy.
First Choice for Economical Shoulder Milling •
M690 Series 90° Shoulder Mills
Designed to streamline even your most challenging milling operations, the
M690 Series provides optimal chip evacuation, excellent shoulder fi nish,
free cutting action, and solid tool design for optimal insert support.
WID_Master16_IndexableMIlling_ShoulderMills_J042_J043_Metric_REBRAND.indd 42 10/30/15 1:03 PM
J43
LViWID M 16 I d bl MIlli Sh ld Mill J042 J043 M i REBRANDO b 3020159 53AM
widia.com
90° Shoulder Mills
Insert Offering
P
M
K
S
H
M690 SD1204..
Max depth of cut: 10mm
Lead angle: 90°
Indexes per insert: 4
Diameter: 50–160mm
Pages: J44–J47
M690 SD1506..
Max depth of cut: 12mm
Lead angle: 90°
Indexes per insert: 4
Diameter: 50–125mm
Pages: J48–J51
P
M
K
S
H
12mm iC insert 15mm iC insert
WID_Master16_IndexableMIlling_ShoulderMills_J042_J043_Metric_REBRAND.indd 43 10/30/15 1:03 PM
J44
LViWID M 16 I d bl Milli Sh ld Mill J044 J045 M i REBRANDO b 14 20159 50AM
widia.com
Shoulder Mills • M690 Series
Shell Mills • SD1204..
insert
screw Nm
Torx
driver
12148037700 4,0 12148000600
Spare Parts
Shell Mills
NOTE: Standard milling cutters will accept insert nose radius up to 2mm without modification.
For tool body modification instructions, see page J16.
order number catalogue number D1 D D4 D6 L Ap1 max Z max RPM
coolant
supply kg
2003556 12396953800 50 22 — 47 40 10,0 4 22400 Yes 0,3
2003557 12396954000 50 22 — 47 40 10,0 5 22400 Yes 0,3
2003573 12396954200 63 22 — 50 40 10,0 5 20000 Yes 0,5
2003574 12396954400 63 22 — 50 40 10,0 6 20000 Yes 0,5
2003580 12396954600 80 27 — 60 50 10,0 6 17700 Yes 1,0
2003581 12396954800 80 27 — 60 50 10,0 8 17700 Yes 1,1
2003596 12396955000 100 32 — 78 50 10,0 8 15800 No 1,5
2003597 12396955200 100 32 — 78 50 10,0 10 15800 No 1,6
2003693 12396955400 125 40 — 89 63 10,0 9 14200 No 3,0
2003694 12396955600 125 40 — 89 63 10,0 12 14200 No 3,0
2003793 12396955800 160 40 66,7 90 63 10,0 12 12500 No 3,6
2003794 12396956000 160 40 66,7 90 63 10,0 15 12500 No 3,6
Shoulder Mills
• Four cutting edges.
• 90° shoulders.
• Excellent for slot and prole milling.
WID_Master16_IndexableMilling_ShoulderMills_J044_J045_Metric_REBRAND.indd 44 10/29/15 2:06 PM
J45
LViWID M 16 I d bl Milli Sh ld Mill J044 J045 M i REBRANDO b 1420159 50AM
widia.com
Shoulder Mills • M690 Series
Inserts
Shoulder Mills
Insert Selection Guide
Material
Group
Light
Machining
General
Purpose
Heavy
Machining
Geometry Grade Geometry Grade Geometry Grade
P1–P2
.E..ML TN6540
.S..MM TN6540
.S..MH TN6540
P3–P4
.E..ML TN7535
.S..MM TN6540
.S..MH TN6540
P5–P6
.E..ML TN7535
.S..MM TN6540
.S..MH TN6540
M1–M2
.E..ML TN6540
.S..MM TN6540
.S..MH TN6540
M3
.E..ML TN7535
.S..MM TN7535
.S..MH TN7535
K1–K2
.E..ML WK15CM
.E..ML WK15CM
.S..MH WK15CM
K3
.E..ML WK15CM
.S..MM TN6525
.S..MH TN6525
N1–N2
.ALP THM-U
.E..ML THM-U
.S..ML THM-U
N3
.ALP THM-U
.E..ML THM-U
.S..ML THM-U
S1–S2
.E..ML TN6540
.S..MM TN6540
.S..MM TN6540
S3
.E..ML TN6540
.S..MM WS30PM
.S..MM TN6540
S4
.E..ML TN6540
.S..MM WS30PM
.S..MM TN6540
H1
.S..MM WS30PM
.S..MM WS30PM
.S..MM WS30PM
rst choice
alternate choice
SDMT-ML
SDMT-ML
catalogue number
cutting
edges D L10 S BS R¡hm
TN2510
TN6520
TN6525
TN6540
TN7525
TN7535
WK15CM
WS30PM
SDMT1204PDRML 4 12,70 12,70 4,77 1,10 1,20 0,08
–
3094667
–
3020185
2030439
2030437
5427423
–
Inserts • SD1204..
P
M
K
N
S
H
SDMX-MM
SDMX-MM
catalogue number
cutting
edges D L10 S BS R¡hm
TN2510
TN6520
TN6525
TN6540
TN7525
TN7535
WK15CM
WS30PM
SDMX120408RMM 4 12,70 12,70 4,76 1,93 0,80 0,10
–
–
3950588
3950589
3950590
3950591
–
5522490
SDMX120412RMM 4 12,70 12,70 4,76 1,50 1,20 0,10
–
–
3950596
3950597
3950599
3950600
–
5519572
SDMX120416RMM 4 12,70 12,70 4,76 1,50 1,60 0,10
–
4145063
4145064
4145065
–
–
–
–
SDMX120424RMM 4 12,70 12,70 4,76 0,60 2,40 0,10
–
–
–
4145072
–
4145093
–
–
SDMX120432RMM 4 12,70 12,70 4,76 — 3,20 0,10
–
–
–
4145094
–
4145095
–
–
SDMX-MMSDMT-ML
WID_Master16_IndexableMilling_ShoulderMills_J044_J045_Metric_REBRAND.indd 45 10/29/15 2:06 PM
J46
LViWID M 16 I d bl Milli Sh ld Mill J046 J047 M i REBRANDO b 14 20159 50AM
widia.com
Shoulder Mills • M690 Series
Inserts • SD1204..
SDMX-MH
catalogue number
cutting
edges D L10 S BS R¡hm
TN2510
TN6520
TN6525
TN6540
TN7525
TN7535
WK15CM
WS30PM
SDMX120408RMH 4 12,70 12,70 4,76 1,93 0,80 0,14
–
–
–
3950592
3950594
3950595
5427427
–
SDMX120412RMH 4 12,70 12,70 4,76 1,54 1,20 0,14
–
3950614
3950601
3950603
3950605
3950606
5427428
–
SDMX120416RMH 4 12,70 12,70 4,76 1,50 1,60 0,14
–
–
–
3950607
–
3950609
–
–
Shoulder Mills
rst choice
alternate choice
SDMT-MH
catalogue number
cutting
edges D L10 S BS R¡hm
TN2510
TN6520
TN6525
TN6540
TN7525
TN7535
WK15CM
WS30PM
SDMT1204PDRMH 4 12,70 12,70 4,81 1,10 1,20 0,14
2028314
3094669
3325040
3326330
2030419
2030417
5427422
–
SDMT-MH
P
M
K
N
S
H
SDEX-ALP
catalogue number
cutting
edges D L10 S BS R¡hm
THM-U
SDEX120408FRALP 4 12,70 12,70 4,76 1,52 0,80 0,02
5281790
SDEX-ALP
P
M
K
N
S
H
rst choice
alternate choice
SDMX-MH
WID_Master16_IndexableMilling_ShoulderMills_J046_J047_Metric_REBRAND.indd 46 10/29/15 2:06 PM
J47
LViWID M 16 I d bl Milli Sh ld Mill J046 J047 M i REBRANDO b 1420159 50AM
widia.com
Shoulder Mills • M690 Series
Recommended Starting Speeds
NOTE: FIRST choice starting speeds are in bold type.
As the average chip thickness increases, the speed should be decreased.
Recommended Starting Speeds [m/min]
Material
Group TN7535 WK15CM WS30PM TTI25 THM-U
P
0
455
395
370 –
–
––
–
– 360
300
250 –
–
–
1
455
395
370 –
–
––
–
– 360
300
250 –
–
–
2
280
255
230 –
–
––
–
– 260
210
180 –
–
–
3
255
230
205 –
–
––
–
– 260
210
180 –
–
–
4
190
175
160 –
–
––
–
– 220
180
150 –
–
–
5
260
230
210 –
–
––
–
– 265
195
165 –
–
–
6
160
135
110 –
–
––
–
– 120
90
75 –
–
–
M
1
205
185
155 –
–
– 225
200
185 400
260
180 –
–
–
2
185
160
140 –
–
– 205
180
145 270
170
120 –
–
–
3
145
130
115 –
–
– 155
135
105 265
175
120 –
–
–
K
1
295
265
240 420
385
340 –
–
– 185
155
130 190
170
150
2
235
210
190 335
295
275 –
–
– 150
120
105 –
–
–
3
195
175
160 280
250
230 –
–
– 120
105
85 –
–
–
N
1
–
–
––
–
––
–
––
–
– 2000
1200
1000
2
–
–
––
–
––
–
––
–
– 1365
815
665
3
–
–
––
–
––
–
––
–
– 800
500
400
S
1
–
–
––
–
–45
40
30 –
–
––
–
–
2
–
–
––
–
–45
40
30 –
–
––
–
–
3
–
–
––
–
–55
45
30 –
–
––
–
–
4
–
–
––
–
–85
60
40 –
–
––
–
–
H
1
–
–
––
–
––
–
––
–
––
–
–
2
–
–
––
–
––
–
––
–
––
–
–
3
–
–
––
–
––
–
––
–
––
–
–
Material
Group TN2510 TN6520 TN6525 TN6540 TN7525
P
0
–
–
––
–
– 340
265
235 300
235
200 340
260
235
1
550
485
450 –
–
– 340
265
235 300
235
200 340
260
235
2
340
310
275 –
–
– 265
210
180 210
160
140 260
210
180
3
310
275
255 –
–
– 235
180
155 180
140
115 235
180
155
4
230
215
190 –
–
– 195
140
120 150
110
90 195
140
120
5
275
250
230 –
–
– 260
195
165 200
150
125 260
195
165
6
190
170
145 –
–
– 170
135
110 135
100
85 170
135
110
M
1
225
200
175 –
–
– 160
100
65 110
65
50 205
185
155
2
205
175
160 –
–
– 100
65
40 65
40
35 185
160
140
3
160
145
125 –
–
– 105
65
45 70
40
35 145
130
115
K
1
350
300
250 375
265
190 230
205
185 185
170
150 315
235
200
2
300
250
210 325
210
160 180
160
150 145
130
115 270
200
165
3
250
210
165 250
190
135 150
135
120 130
120
105 200
165
140
N
1
–
–
––
–
––
–
––
–
––
–
–
2
–
–
––
–
––
–
––
–
––
–
–
3
–
–
––
–
––
–
––
–
––
–
–
S
1
–
–
––
–
––
–
–40
30
25 –
–
–
2
–
–
––
–
––
–
–20
15
10 –
–
–
3
–
–
––
–
––
–
–60
35
25 –
–
–
4
–
–
––
–
––
–
–50
25
20 –
–
–
H
1
115
90
60 –
–
––
–
––
–
––
–
–
2
115
90
60 –
–
––
–
––
–
––
–
–
3
85
65
45 –
–
––
–
––
–
––
–
–
Shoulder Mills
NOTE: Use “Light Machining” value as starting feed rate.
Recommended Starting Feeds [mm] Light
Machining
General
Purpose
Heavy
Machining
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
.F..ALP 0,12
0,23
0,46 0,08
0,17
0,33 0,06
0,13
0,25 0,06
0,11
0,22 0,05
0,10
0,20 .F..ALP
.E..ML 0,12
0,35
0,58 0,08
0,25
0,42 0,06
0,19
0,31 0,06
0,17
0,27 0,05
0,15
0,25 .E..ML
.S..MM 0,12
0,42
0,70 0,08
0,30
0,50 0,06
0,23
0,38 0,06
0,20
0,33 0,05
0,18
0,30 .S..MM
.S..MH 0,23
0,54
0,85 0,17
0,39
0,61 0,13
0,29
0,46 0,11
0,25
0,40 0,10
0,23
0,36 .S..MH
Recommended Starting Feeds
WID_Master16_IndexableMilling_ShoulderMills_J046_J047_Metric_REBRAND.indd 47 10/29/15 2:06 PM
J48
LViWID M 16 I d bl Milli Sh ld Mill J048 J049 M i REBRANDO b 14 20159 51AM
widia.com
Shoulder Mills • M690 Series
Shell Mills • SD1506..
Spare Parts
Shell Mills
order number catalogue number D1 D D6 L Ap1 max Z max RPM
coolant
supply kg
2003555 12396943800 50 22 47 40 12,0 4 18500 Yes 0,3
2003562 12396944200 63 22 50 40 12,0 5 16100 Yes 0,4
2003579 12396944600 80 27 60 50 12,0 6 14000 Yes 0,9
2003595 12396945000 100 32 78 50 12,0 8 12300 No 1,3
2003682 12396945400 125 40 89 63 12,0 9 10800 No 2,7
• Four cutting edges.
• 90° shoulders.
• Excellent for slot and prole milling.
insert
screw Nm
Torx
driver
MS2260 6,0 12148007500
Shoulder Mills
WID_Master16_IndexableMilling_ShoulderMills_J048_J049_Metric_REBRAND.indd 48 10/29/15 2:06 PM
J49
LViWID M 16 I d bl Milli Sh ld Mill J048 J049 M i REBRANDO b 1420159 51AM
widia.com
Shoulder Mills • M690 Series
Inserts
Shoulder Mills
Insert Selection Guide
Material
Group
Light
Machining
General
Purpose
Heavy
Machining
Geometry Grade Geometry Grade Geometry Grade
P1–P2
.E..ML TN6540
.S..MM TN6540
.S..MH TN6540
P3–P4
.E..ML TN7535
.S..MM TN6540
.S..MH TN6540
P5–P6
.E..ML TN7535
.S..MM TN6540
.S..MH TN6540
M1–M2
.E..ML TN6540
.S..MM TN6540
.S..MH TN6540
M3
.E..ML TN7535
.S..MM TN7535
.S..MH TN7535
K1–K2
.E..ML WK15CM
.E..ML WK15CM
.S..MH WK15CM
K3
.E..ML WK15CM
.S..MM WK15CM
.S..MH WK15CM
N1–N2
––
––
––
N3
––
––
––
S1–S2
.E..ML TN6540
.S..MM TN6540
.S..MM TN6540
S3
.E..ML TN6540
.S..MM TN6540
.S..MM TN6540
S4
.E..ML TN6540
.S..MM TN6540
.S..MM TN6540
H1
.S..MM TN6540
.S..MM TN6540
.S..MM TN6540
SDMT-ML
catalogue number
cutting
edges D L10 S BS R¡hm
TN2510
TN6540
TN7525
TN7535
WK15CM
SDMT1506PDRML 4 15,88 15,88 6,32 1,10 1,20 0,08
–
3378677
2030434
2030420
5427425
rst choice
alternate choice
SDMT-ML
SDMX-MM
catalogue number
cutting
edges D L10 S BS R¡hm
TN2510
TN6540
TN7525
TN7535
WK15CM
SDMX150612RMM 4 15,88 15,88 6,35 1,45 1,20 0,14
–
3949807
3949809
–
–
SDMX-MM
P
M
K
N
S
H
Inserts • SD1506..
WID_Master16_IndexableMilling_ShoulderMills_J048_J049_Metric_REBRAND.indd 49 10/29/15 2:06 PM
J50
LViWID M 16 I d bl Milli Sh ld Mill J050 J051 M i REBRANDO b 14 20159 51AM
widia.com
Shoulder Mills • M690 Series
Inserts • SD1506..
SDMX-MH
catalogue number
cutting
edges D L10 S BS R¡hm
TN2510
TN6540
TN7525
TN7535
WK15CM
SDMX150612RMH 4 15,88 15,88 6,35 1,45 1,20 0,20
–
3949811
3950583
3950584
5427426
SDMX150616RMH 4 15,88 15,88 6,35 1,51 1,60 0,20
–
3950585
–
3950587
–
Shoulder Mills
rst choice
alternate choice
SDMT-MH
catalogue number
cutting
edges D L10 S BS R¡hm
TN2510
TN6540
TN7525
TN7535
WK15CM
SDMT1506PDRMH 4 15,88 15,88 6,35 1,10 1,20 0,20
2028325
3378676
2030414
2030400
5427424
SDMT-MH
P
M
K
N
S
H
SDMX-MH
WID_Master16_IndexableMilling_ShoulderMills_J050_J051_Metric_REBRAND.indd 50 10/29/15 2:06 PM
J51
LViWID M 16 I d bl Milli Sh ld Mill J050 J051 M i REBRANDO b 1420159 51AM
widia.com
Recommended Starting Feeds
NOTE: Use “Light Machining” value as starting feed rate.
Recommended Starting Feeds [mm] Light
Machining
General
Purpose
Heavy
Machining
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
.F..ALP 0,12
0,23
0,46 0,08
0,17
0,33 0,06
0,13
0,25 0,06
0,11
0,22 0,05
0,10
0,20 .F..ALP
.E..ML 0,12
0,35
0,58 0,08
0,25
0,42 0,06
0,19
0,31 0,06
0,17
0,27 0,05
0,15
0,25 .E..ML
.S..MM 0,12
0,42
0,70 0,08
0,30
0,50 0,06
0,23
0,38 0,06
0,20
0,33 0,05
0,18
0,30 .S..MM
.S..MH 0,23
0,54
0,85 0,17
0,39
0,61 0,13
0,29
0,46 0,11
0,25
0,40 0,10
0,23
0,36 .S..MH
Shoulder Mills • M690 Series
Recommended Starting Speeds
Recommended Starting Speeds [m/min]
Material
Group TN2510 TN6540 TN7525 TN7535 WK15CM
P
0
–
–
– 300
235
200 340
260
235 455
395
370
––
–
1
550
485
450 300
235
200 340
260
235 455
395
370
––
–
2
340
310
275 210
160
140 260
210
180 280
255
230
––
–
3
310
275
255 180
140
115 235
180
155 255
230
205
––
–
4
230
215
190 150
110
90 195
140
120 190
175
160
––
–
5
275
250
230 200
150
125 260
195
165 260
230
210
––
–
6
190
170
145 135
100
85 170
135
110 160
135
110
––
–
M
1
225
200
175 110
65
50 205
185
155 205
185
155
––
–
2
205
175
160 65
40
35 185
160
140 185
160
140
––
–
3
160
145
125 70
40
35 145
130
115 145
130
115
––
–
K
1
350
300
250 185
170
150 315
235
200 295
265
240
420 385
340
2
300
250
210 145
130
115 270
200
165 235
210
190
335 295
275
3
250
210
165 130
120
105 200
165
140 195
175
160
280 250
230
N
1
–
–
––
–
––
–
––
–
–
––
–
2
–
–
––
–
––
–
––
–
–
––
–
3
–
–
––
–
––
–
––
–
–
––
–
S
1
–
–
–40
30
25 –
–
––
–
–
––
–
2
–
–
–20
15
10 –
–
––
–
–
––
–
3
–
–
–60
35
25 –
–
––
–
–
––
–
4
–
–
–50
25
20 –
–
––
–
–
––
–
H
1
115
90
60 –
–
––
–
––
–
–
––
–
2
115
90
60 –
–
––
–
––
–
–
––
–
3
85
65
45 –
–
––
–
––
–
–
––
–
NOTE: FIRST choice starting speeds are in bold type.
As the average chip thickness increases, the speed should be decreased.
Shoulder Mills
WID_Master16_IndexableMilling_ShoulderMills_J050_J051_Metric_REBRAND.indd 51 10/29/15 2:06 PM
LViWID M 16 I d bl MIlli H li lMill K000 K001 M i REBRANDO b 14 20159 52AM
WID_Master16_IndexableMIlling_HelicalMills_K000_K001_Metric_REBRAND.indd 1 10/29/15 2:07 PM
widia.com K1
LViWID M 16 I d bl MIlli H li lMill K000 K001 M i REBRANDO b 1420159 52AM
M390 • Square Insert Helical Mill Platform ....................................................................................................... K2–K9
Indexable Milling • Helical Mills
WID_Master16_IndexableMIlling_HelicalMills_K000_K001_Metric_REBRAND.indd 1 10/29/15 2:07 PM
K2
LViWID M 16 I d bl MIlli H li lMill K002 K003 M i REBRANDO b 30 20159 54AM
widia.com
Positive pockets and geometry for free cutting action.
Designed for optimal
chip evacuation.
Replaceable
end cap for lower
maintenance costs.
Strong tool design for optimum insert support.
M390
• Strong insert and tool design for maximum productivity.
• New SDMX inserts — helical cutting edge for smooth cutting.
• Long edge shoulder ensures stable insert support.
First Choice for High Productivity Helical Milling •
M390 Series
With a replaceable nose collar and positive helix for increased productivity,
the M390 Series Helical Mills provide optimal chip evacuation and
performance with lower maintenance costs.
WID_Master16_IndexableMIlling_HelicalMills_K002_K003_Metric_REBRAND.indd 2 10/30/15 1:03 PM
K3
LViWID M 16 I d bl MIlli H li lMill K002 K003 M i REBRANDO b 3020159 54AM
widia.com
Helical Mills
Maximum cutting depth (Ap1) and contact width (ae) ratios based on application type
Slot Milling Contouring Profi ling
ae = 1 x D1
Ap1 max = 0,6 x D1
*Not recommended in ISO “H” materials. *Not recommended in ISO “H” materials.
ae = 0,25–0,4 x D1
Ap1 max = 1 x D1
ae = >0,4 x D1
Ap1 max = 0,6 x D1
ae = <0,25 x D1
Ap1 max = Ap1 max
M390 SD1204...
Max depth of cut: 17mm
Lead angle: 90°
Indexes per insert: 4
Diameter: 50–80mm
Pages: K4–K9
P
M
K
S
H
WID_Master16_IndexableMIlling_HelicalMills_K002_K003_Metric_REBRAND.indd 3 10/30/15 1:03 PM
K4
LViWID M 16 I d bl Milli H li lMill K004 K005 M i REBRANDO b 14 20159 53AM
widia.com
Helical Mills • M390 Series
Integral • SD1204..
D1
insert
screw Nm
Torx
wrench
end
cap
socket-head
cap screw
50 12148037700 4,0 12148000600 12393051200 12147625400
63 12148037700 4,0 12148000600 12393051400 12148783700
80 12148037700 4,0 12148000600 12393051800 12148783700
Spare Parts
Integral
order number catalogue number D1 L L1 L2 Ap1 max Z Z U
CSMS
system size max RPM
coolant
supply kg
2021422 12393041200 50 207 105 82 64,0 18 3 DV50 14000 Yes 3,4
2021423 12393041400 63 232 130 107 85,0 32 4 DV50 12000 Yes 4,3
2021424 12393041800 80 262 160 137 117,0 55 5 DV50 10500 Yes 6,3
Helical Mills
• Four cutting edges per insert.
• Replaceable end cap.
• Positive helix for high productivity.
NOTE: Z = number of pocket seats.
ZU = number of effective teeth.
WID_Master16_IndexableMilling_HelicalMills_K004_K005_Metric_REBRAND.indd 4 10/29/15 2:08 PM
K5
LViWID M 16 I d bl Milli H li lMill K004 K005 M i REBRANDO b 1420159 53AM
widia.com
Helical Mills • M390 Series
End Cap
End Cap
order number catalogue number D1 L1 Z U Z kg
2021428 12393051200 50 21 3 6 0,2
2021429 12393051400 63 21 4 8 0,3
2021430 12393051800 80 21 5 10 0,5
Helical Mills
• Four cutting edges per insert.
• Replaceable end cap.
• Positive helix for high productivity.
NOTE: Z = number of pocket seats.
ZU = number of effective teeth.
WID_Master16_IndexableMilling_HelicalMills_K004_K005_Metric_REBRAND.indd 5 10/29/15 2:08 PM
K6
LViWID M 16 I d bl Milli H li lMill K006 K007 M i REBRANDO b 14 20159 53AM
widia.com
Helical Millls • M390 Series
Inserts
Helical Mills
Insert Selection Guide
Material
Group
Light
Machining
General
Purpose
Heavy
Machining
Geometry Grade Geometry Grade Geometry Grade
P1–P2
.E..ML TN6540
.S..MM TN6540
.S..MH TN6540
P3–P4
.E..ML TN7535
.S..MM TN6540
.S..MH TN6540
P5–P6
.E..ML TN7535
.S..MM TN6540
.S..MH TN6540
M1–M2
.E..ML TN6540
.S..MM TN6540
.S..MH TN6540
M3
.E..ML TN7535
.S..MM TN7535
.S..MH TN7535
K1–K2
.E..ML WK15CM
.E..ML WK15CM
.S..MH WK15CM
K3
.E..ML WK15CM
.S..MM TN6525
.S..MH TN6525
N1–N2
––
––
––
N3
––
––
––
S1–S2
.E..ML TN6540
.S..MM TN6540
.S..MM TN6540
S3
.E..ML TN6540
.S..MM WS30PM
.S..MM TN6540
S4
.E..ML TN6540
.S..MM WS30PM
.S..MM TN6540
H1
.S..MM WS30PM
.S..MM WS30PM
.S..MM WS30PM
SDMT-ML
catalogue number
cutting
edges D L10 S BS R¡hm
TN6520
TN6525
TN6540
TN7525
TN7535
WK15CM
WS30PM
SDMT1204PDRML 4 12,70 12,70 4,77 1,10 1,20 0,08
3094667
–
3020185
2030439
2030437
5427423
–
rst choice
alternate choice
SDMT-ML
Inserts • SD1204..
SDMX-MM
catalogue number
cutting
edges D L10 S BS R¡hm
TN6520
TN6525
TN6540
TN7525
TN7535
WK15CM
WS30PM
SDMX120408RMM 4 12,70 12,70 4,76 1,93 0,80 0,10
–
3950588
3950589
3950590
3950591
–
5522490
SDMX120412RMM 4 12,70 12,70 4,76 1,50 1,20 0,10
–
3950596
3950597
3950599
3950600
–
5519572
SDMX120416RMM 4 12,70 12,70 4,76 1,50 1,60 0,10
4145063
4145064
4145065
–
–
–
–
SDMX120424RMM 4 12,70 12,70 4,76 0,60 2,40 0,10
–
–
4145072
–
4145093
–
–
SDMX120432RMM 4 12,70 12,70 4,76 — 3,20 0,10
–
–
4145094
–
4145095
–
–
SDMX-MM
P
M
K
N
S
H
WID_Master16_IndexableMilling_HelicalMills_K006_K007_Metric_REBRAND.indd 6 10/29/15 2:08 PM
K7
LViWID M 16 I d bl Milli H li lMill K006 K007 M i REBRANDO b 1420159 53AM
widia.com
Helical Mills • M390 Series
Inserts • SD1204..
rst choice
alternate choice
SDMX-MH
SDMX-MH
catalogue number
cutting
edges D L10 S BS R¡hm
TN6520
TN6525
TN6540
TN7525
TN7535
WK15CM
WS30PM
SDMX120408RMH 4 12,70 12,70 4,76 1,93 0,80 0,14
–
–
3950592
3950594
3950595
5427427
–
SDMX120412RMH 4 12,70 12,70 4,76 1,54 1,20 0,14
3950614
3950601
3950603
3950605
3950606
5427428
–
SDMX120416RMH 4 12,70 12,70 4,76 1,50 1,60 0,14
–
–
3950607
–
3950609
–
–
Helical Mills
SDMT-MH
catalogue number
cutting
edges D L10 S BS R¡hm
TN6520
TN6525
TN6540
TN7525
TN7535
WK15CM
WS30PM
SDMT1204PDRMH 4 12,70 12,70 4,81 1,10 1,20 0,14
3094669
3325040
3326330
2030419
2030417
5427422
–
SDMT-MH
P
M
K
N
S
H
WID_Master16_IndexableMilling_HelicalMills_K006_K007_Metric_REBRAND.indd 7 10/29/15 2:08 PM
K8
LViWID M 16 I d bl Milli H li lMill K008 K009 M i REBRANDO b 14 20159 53AM
widia.com
Helical Millls • M390 Series
Recommended Starting Speeds
Helical Mills
Recommended Starting Speeds [m/min]
Material
Group TN6520 TN6525 TN6540 TN7525
P
0
–
–
– 340
265
235 300
235
200 340
260
235
1
–
–
– 340
265
235 300
235
200 340
260
235
2
–
–
– 265
210
180 210
160
140 260
210
180
3
–
–
– 235
180
155 180
140
115 235
180
155
4
–
–
– 195
140
120 150
110
90 195
140
120
5
–
–
– 260
195
165 200
150
125 260
195
165
6
–
–
– 170
135
110 135
100
85 170
135
110
M
1
–
–
– 160
100
65 110
65
50 205
185
155
2
–
–
– 100
65
40 65
40
35 185
160
140
3
–
–
– 105
65
45 70
40
35 145
130
115
K
1
375
265
190 230
205
185 185
170
150 315
235
200
2
325
210
160 180
160
150 145
130
115 270
200
165
3
250
190
135 150
135
120 130
120
105 200
165
140
N
1
–
–
––
–
––
–
––
–
–
2
–
–
––
–
––
–
––
–
–
3
–
–
––
–
––
–
––
–
–
S
1
–
–
––
–
–40
30
25 –
–
–
2
–
–
––
–
–20
15
10 –
–
–
3
–
–
––
–
–60
35
25 –
–
–
4
–
–
––
–
–50
25
20 –
–
–
H
1
–
–
––
–
––
–
––
–
–
2
–
–
––
–
––
–
––
–
–
3
–
–
––
–
––
–
––
–
–
(continued)
WID_Master16_IndexableMilling_HelicalMills_K008_K009_Metric_REBRAND.indd 8 10/29/15 2:08 PM
K9
LViWID M 16 I d bl Milli H li lMill K008 K009 M i REBRANDO b 1420159 53AM
widia.com
Helical Millls • M390 Series
Recommended Starting Speeds
NOTE: FIRST choice starting speeds are in bold type.
As the average chip thickness increases, the speed should be decreased.
Helical Mills
Material
Group TN7535 WK15CM WS30PM
P
0
455
395
370 –
–
––
–
–
1
455
395
370 –
–
––
–
–
2
280
255
230 –
–
––
–
–
3
255
230
205 –
–
––
–
–
4
190
175
160 –
–
––
–
–
5
260
230
210 –
–
––
–
–
6
160
135
110 –
–
––
–
–
M
1
205
185
155 –
–
– 225
200
185
2
185
160
140 –
–
– 205
180
145
3
145
130
115 –
–
– 155
135
105
K
1
295
265
240 420
385
340 –
–
–
2
235
210
190 335
295
275 –
–
–
3
195
175
160 280
250
230 –
–
–
N
1
–
–
––
–
––
–
–
2
–
–
––
–
––
–
–
3
–
–
––
–
––
–
–
S
1
–
–
––
–
–45
40
30
2
–
–
––
–
–45
40
30
3
–
–
––
–
–55
45
30
4
–
–
––
–
–85
60
40
H
1
–
–
––
–
––
–
–
2
–
–
––
–
––
–
–
3
–
–
––
–
––
–
–
NOTE: Use “Light Machining” value as starting feed rate.
Recommended Starting Feeds [mm] Light
Machining
General
Purpose
Heavy
Machining
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
.F..ALP 0,12
0,23
0,46 0,08
0,17
0,33 0,06
0,13
0,25 0,06
0,11
0,22 0,05
0,10
0,20 .F..ALP
.E..ML 0,12
0,35
0,58 0,08
0,25
0,42 0,06
0,19
0,31 0,06
0,17
0,27 0,05
0,15
0,25 .E..ML
.S..MM 0,12
0,42
0,70 0,08
0,30
0,50 0,06
0,23
0,38 0,06
0,20
0,33 0,05
0,18
0,30 .S..MM
.S..MH 0,23
0,54
0,85 0,17
0,39
0,61 0,13
0,29
0,46 0,11
0,25
0,40 0,10
0,23
0,36 .S..MH
(Recommended Starting Speeds [m/min] — continued)
Recommended Starting Feeds
WID_Master16_IndexableMilling_HelicalMills_K008_K009_Metric_REBRAND.indd 9 10/29/15 2:08 PM
LViWID M 16 I d bl MIlli Sl i C L000 L001 M i REBRANDN b 12 20158 36AM
WID_Master16_IndexableMIlling_SlottingCutters_L000_L001_Metric_REBRAND.indd 1 11/12/15 8:57 AM
L1
LViWID M 16 I d bl MIlli Sl i C L000 L001 M i REBRANDN b 1220158 36AM
widia.com
M16 • T-Slotting Platform .................................................................................................................................... L2–L7
M94 • Precise Slotting and Grooving ............................................................................................................... L8–L14
M95 • Square Style Insert Slotting Platform .................................................................................................. L16–L21
M900 • Adjustable Slotting Platform .............................................................................................................L22––L33
Indexable Milling • Slotting Mills
WID_Master16_IndexableMIlling_SlottingCutters_L000_L001_Metric_REBRAND.indd 1 11/12/15 8:57 AM
L2
LViWID M 16 I d bl MIlli Sl i C L002 L003 M i REBRANDD b 1 201510 59AM
widia.com
Strong tool design for
optimum security.
Designed for maximum
chip evacuation.
Excellent T-slot mill for
steel and cast iron.
• Strong and sturdy tool design ensures reliable steel and cast iron machining,
time after time.
• Maximum chip evacuation streamlines your most challenging milling operations.
M16
Designed for maximum chip evacuation and optimum security,
the M16 Series Slotting Mills are an excellent choice for T-slot
milling of steel and cast iron.
Reliable, Powerful, and Durable Milling Tools •
M16 Series T-Slotting Mills
WID_Master16_IndexableMIlling_SlottingCutters_L002_L003_Metric_REBRAND.indd 2 12/1/15 10:59 AM
L3
LViWID M 16 I d bl MIlli Sl i C L002 L003 M i REBRANDD b 1201510 59AM
widia.com
Slotting Mills
T-Slotting
Steel
NOTE: Air blast is recommended to disperse the chips.
• If machining a vertical slot, minimise depth; reference Figure 1.
If the depth is greater than Figure1, chip evacuation problems
could occur.
• Vibrations could occur when the T-slot cutter diameter
increases; use Figure1 as the startingpoint. If vibrations
are a concern, adopt the Figure2 solution.
Cast Iron
• Fewer problems with chip evacuation and reduced
cutting forces enable deeper vertical slots asshown
in Figures 2 and 3.
Figure 3
C/2
C
Figure 2
1–3mm
Figure 1
Insert Offering
Inserts with positive
chipbreaker providing low
cutting forces.
P
M
K
M16
Slot Width Range:
11–21,9mm
Indexes per insert: 2
Diameter: 25–50mm
Pages: L4–L7
WID_Master16_IndexableMIlling_SlottingCutters_L002_L003_Metric_REBRAND.indd 3 12/1/15 10:59 AM
L4
LViWID M 16 I d bl Milli Sl i C L004 L005 M i REBRANDD b 17 20158 50AM
widia.com
Slotting Mills • M16 Series
Weldon® Shanks
D1
insert
screw Nm
Torx
driver
Torx
wrench
25 12148068700 1,0 12148086600 —
32 12148067200 2,0 12148086600 —
40 12148038800 3,0 — 12148000600
50 12148007200 4,0 — 12148007500
Spare Parts
Weldon Shanks
order number catalogue number D1 D D3 L L3 Ap1 max Z Z U insert 1
coolant
supply kg
2021380 12391602600M 25 16 13 80 32 11,0 4 2 CPNT060204T Yes 0,1
2021381 12391603000 32 16 15 90 42 13,9 4 2 CPNT080308T Yes 0,2
2021382 12391603400 40 25 19 105 49 17,9 4 2 CPNT09T308T Yes 0,4
2021383 12391603800 50 32 25 120 60 21,9 4 2 CPNT120408T Yes 0,7
Slotting Mills
• T-slot mill.
• Ideal for steel and
cast iron machining.
NOTE: Z = number of pocket seats.
ZU = number of effective teeth.
WID_Master16_IndexableMilling_SlottingCutters_L004_L005_Metric_REBRAND.indd 4 12/17/15 8:50 AM
L5
LViWID M 16 I d bl Milli Sl i C L004 L005 M i REBRANDD b 1720158 50AM
widia.com
Slotting Mills • M16 Series
Inserts
Slotting Mills
Insert Selection Guide
Material
Group
Light
Machining
General
Purpose
Heavy
Machining
Geometry Grade Geometry Grade Geometry Grade
P1–P2
CPNT WP40PM
CPNT WP40PM
CPNT WP40PM
P3–P4
CPNT WP35CM
CPNT WP35CM
CPNT WP35CM
P5–P6
CPNT WP35CM
CPNT WP40PM
CPNT WP40PM
M1–M2
CPNT WP40PM
CPNT WP40PM
CPNT WP40PM
M3
CPNT TN7535
CPNT WP35CM
CPNT WP35CM
K1–K2
CPNT WK15CM
CPNT WK15CM
CPNT WK15CM
K3
CPNT WK15CM
CPNT WP35CM
CPNT WP35CM
N1–N2
––
––
––
N3
––
––
––
S1–S2
––
––
––
S3
––
––
––
S4
––
––
––
H1
––
––
––
rst choice
alternate choice
CPNT
CPNT • CP0602..
catalogue number
cutting
edges D L10 M S R¡hm
WK15CM
WP35CM
WP40PM
CPNT060204T 2 6,35 6,45 1,54 2,38 0,40 0,03
5903680
5903676
5578222
CPNT • CP0803..
catalogue number
cutting
edges D L10 M S R¡hm
WK15CM
WP35CM
WP40PM
CPNT080308T 2 7,94 8,06 1,76 3,18 0,80 0,09
5903701
5903677
–
P
M
K
N
S
H
WID_Master16_IndexableMilling_SlottingCutters_L004_L005_Metric_REBRAND.indd 5 12/17/15 8:50 AM
L6
LViWID M 16 I d bl Milli Sl i C L006 L007 M i REBRANDO b 14 20159 58AM
widia.com
Slotting Mills • M16 Series
Inserts
CPNT • CP09T3..
catalogue number
cutting
edges D L10 M S R¡hm
WK15CM
WP35CM
WP40PM
CPNT09T308T 2 9,52 9,67 2,20 3,97 0,80 0,04
5903702
5903678
–
Slotting Mills
rst choice
alternate choice
CPNT
CPNT • CP1204..
catalogue number
cutting
edges D L10 M S R¡hm
WK15CM
WP35CM
WP40PM
CPNT120408T 2 12,70 12,90 3,08 4,76 0,80 0,03
5903703
5903679
–
P
M
K
N
S
H
WID_Master16_IndexableMilling_SlottingCutters_L006_L007_Metric_REBRAND.indd 6 10/29/15 2:09 PM
L7
LViWID M 16 I d bl Milli Sl i C L006 L007 M i REBRANDO b 1420159 58AM
widia.com
Slotting Mills • M16 Series
Recommended Starting Speeds
NOTE: FIRST choice starting speeds are in bold type.
As the average chip thickness increases, the speed should be decreased.
Slotting Mills
Recommended Starting Speeds [m/min]
Material
Group WK15CM WP35CM WP40PM
P
0
–
–
– 455
395
370 295
260
245
1
–
–
– 455
395
370 295
260
245
2
–
–
– 280
255
230 250
215
180
3
–
–
– 255
230
205 230
195
160
4
–
–
– 190
175
160 205
170
135
5
–
–
– 260
230
210 170
155
135
6
–
–
– 160
135
110 150
115
90
M
1
–
–
– 205
185
155 195
170
155
2
–
–
– 185
160
140 175
150
125
3
–
–
– 145
130
115 130
115
90
K
1
420
385
340 295
265
240 –
–
–
2
335
295
275 235
210
190 –
–
–
3
280
250
230 195
175
160 –
–
–
N
1
–
–
––
–
––
–
–
2
–
–
––
–
––
–
–
3
–
–
––
–
––
–
–
S
1
–
–
––
–
–40
35
30
2
–
–
––
–
–40
35
30
3
–
–
––
–
–50
40
30
4
–
–
–66
50
33 65
50
35
H
1
–
–
––
–
––
–
–
2
–
–
––
–
––
–
–
3
–
–
––
–
––
–
–
NOTE: Use “Light Machining” value as starting feed rate.
Recommended Starting Feeds [mm] Light
Machining
General
Purpose
Heavy
Machining
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
CPNT 0,12
0,29
0,46 0,09
0,21
0,33 0,07
0,16
0,25 0,06
0,14
0,22 0,05
0,13
0,20 CPNT
CPNT 0,12
0,29
0,46 0,09
0,21
0,33 0,07
0,16
0,25 0,06
0,14
0,22 0,05
0,13
0,20 CPNT
CPNT 0,12
0,29
0,46 0,08
0,21
0,33 0,06
0,16
0,25 0,06
0,14
0,22 0,05
0,13
0,20 CPNT
CPNT 0,12
0,35
0,58 0,08
0,25
0,42 0,06
0,19
0,32 0,06
0,16
0,28 0,05
0,15
0,25 CPNT
Recommended Starting Feeds
WID_Master16_IndexableMilling_SlottingCutters_L006_L007_Metric_REBRAND.indd 7 10/29/15 2:09 PM
L8
LViWID M 16 I d bl MIlli Sl i C L008 L009 M i REBRANDD b 1 201511 00AM
widia.com
Three cutting
edges per insert.
Excellent for thin slotting
and grooving.
Cooling grooves for
precise cooling.
• Coolant grooves provide accurate and consistent cooling performance.
• Perfect choice when shallow grooving and slotting are required.
• Tangential mounted inserts ensure maximum strength and stability.
M94
For Precise Slotting and Grooving Applications •
M94 Series Slotting Mills
The M94 Series Slotting Mills are equipped with three cutting edges per
insert and precise cooling capabilities for the most demanding small width
slotting and grooving operations.
WID_Master16_IndexableMIlling_SlottingCutters_L008_L009_Metric_REBRAND.indd 8 12/1/15 11:00 AM
L9
LViWID M 16 I d bl MIlli Sl i C L008 L009 M i REBRANDD b 1201511 00AM
widia.com
Slotting Mills
Pages: L10–L14
M94
Slot Width Range:
1,93–5,23mm
Indexes per insert: 3
Diameter: 25–80mm
P
M
K
Insert Offering
Inserts with free-cutting
geometry providing
low cutting forces.
WID_Master16_IndexableMIlling_SlottingCutters_L008_L009_Metric_REBRAND.indd 9 12/1/15 11:00 AM
L10
LViWID M 16 I d bl Milli Sl i C L010 L011 M i REBRANDO b 19 20153 01PM
widia.com
Slotting Mills • M94 Series
Weldon® Shanks
D1
insert
screw Nm
Torx
driver
25 12148080000 1,0 12148086600
40 12148067200 3,5 12148086600
Spare Parts
Weldon Shanks
NOTE: D min = minimum internal hole diameter required for clearance.
order number catalogue number D1 D D3 D min L L2 W min W max Z insert 1
coolant
supply kg
2022619 12290900800 25 25 21 34 100 44 1,93 2,73 3 TCAX1103ZZ.. No 0,4
2022620 12290901200 40 32 32 65 110 50 2,73 4,26 3 TNAX1604ZZ.. No 0,7
Slotting Mills
• Three cutting edges per insert.
• Tangential mounted inserts.
• Shallow grooving and slotting.
WID_Master16_IndexableMilling_SlottingCutters_L010_L011_Metric_REBRAND.indd 10 10/29/15 2:09 PM
L11
LViWID M 16 I d bl Milli Sl i C L010 L011 M i REBRANDO b 1920153 01PM
widia.com
Slotting Mills • M94 Series
Shell Mills
Shell Mills
NOTE: D min = minimum internal hole diameter required for clearance.
order number catalogue number D1 D D min D6 L W min W max Z insert 1
coolant
supply kg
2022621 12290911600 63 22 85 55 40 2,73 4,26 6 TNAX1604ZZ.. No 0,7
2022622 12290911800 80 27 102 68 50 4,26 5,23 6 TNAX2206ZZ.. No 1,3
W max
W min
• Three cutting edges per insert.
• Tangential mounted inserts.
• Shallow grooving and slotting.
Slotting Mills
Spare Parts
D1
insert
screw Nm
Torx
driver
Torx
driver
63 12148067200 3,5 — 12148086600
80 12148007200 6,0 12148007500 —
WID_Master16_IndexableMilling_SlottingCutters_L010_L011_Metric_REBRAND.indd 11 10/29/15 2:09 PM
L12
LViWID M 16 I d bl Milli Sl i C L012 L013 M i REBRANDO b 14 20159 59AM
widia.com
Slotting Mills • M94 Series
Inserts
Slotting Mills
Insert Selection Guide
Material
Group
Light
Machining
General
Purpose
Heavy
Machining
Geometry Grade Geometry Grade Geometry Grade
P1–P2
TCAX/TNAX TTM/TTM08
TCAX/TNAX TTM/TTM08
TCAX/TNAX TTM/TTM08
P3–P4
TCAX/TNAX TTM/TTM08
TCAX/TNAX TTM/TTM08
TCAX/TNAX TTM/TTM08
P5–P6
TCAX/TNAX TTM/TTM08
TCAX/TNAX TTM/TTM08
TCAX/TNAX TTM/TTM08
M1–M2
TCAX/TNAX TTM/TTM08
TCAX/TNAX TTM/TTM08
TCAX/TNAX TTM/TTM08
M3
TCAX/TNAX TTM/TTM08
TCAX/TNAX TTM/TTM08
TCAX/TNAX TTM/TTM08
K1–K2
TCAX/TNAX TTM/TTM08
TCAX/TNAX TTM/TTM08
TCAX/TNAX TTM/TTM08
K3
TCAX/TNAX THM
TCAX/TNAX THM
TCAX/TNAX THM
N1–N2
TCAX/TNAX THM
TCAX/TNAX THM
TCAX/TNAX THM
N3
TCAX/TNAX THM
TCAX/TNAX THM
TCAX/TNAX THM
S1–S2
TCAX/TNAX THM
TCAX/TNAX THM
TCAX/TNAX THM
S3
TCAX/TNAX THM
TCAX/TNAX THM
TCAX/TNAX THM
S4
TCAX/TNAX THM
TCAX/TNAX THM
TCAX/TNAX THM
H1
––
––
––
P
M
K
N
S
H
TCAX • 1103..
catalogue number
cutting
edges D LI W T S hm
THM
TTM
TTM08
TCAX1103ZZ18 3 6,35 11,00 1,93 2,10 3,20 0,07
–
–
2014041
TCAX1103ZZ21 3 6,35 11,00 2,23 2,25 3,20 0,07
2026017
–
2026018
TCAX1103ZZ26 3 6,35 11,00 2,73 2,35 3,20 0,07
2014054
2014056
–
rst choice
alternate choice
TCAX
TNAX • 1604..
catalogue number
cutting
edges D LI W T S hm
THM
TTM
TTM08
TNAX1604ZZ26 3 9,52 16,49 2,73 3,08 4,76 0,07
2014152
–
2014164
TNAX1604ZZ31 3 9,52 16,49 3,26 3,04 4,76 0,07
2014166
–
2014168
TNAX1604ZZ41 3 9,52 16,49 4,26 3,32 4,76 0,07
2014170
2014172
–
TNAX
WID_Master16_IndexableMilling_SlottingCutters_L012_L013_Metric_REBRAND.indd 12 10/29/15 2:09 PM
L13
LViWID M 16 I d bl Milli Sl i C L012 L013 M i REBRANDO b 1420159 59AM
widia.com
Slotting Mills • M94 Series
P
M
K
N
S
H
Inserts
TNAX • 2206..
catalogue number
cutting
edges D LI W T S hm
THM
TTM
TTM08
TNAX2206ZZ41 3 12,70 22,00 4,26 4,02 6,40 0,07
–
2014176
–
TNAX2206ZZ51 3 12,70 22,00 5,23 4,43 6,40 0,07
–
2026022
–
Slotting Mills
rst choice
alternate choice
TNAX
WID_Master16_IndexableMilling_SlottingCutters_L012_L013_Metric_REBRAND.indd 13 10/29/15 2:09 PM
widia.com
L14
LViWID M 16 I d bl Milli Sl i C L014 L015 M i REBRANDN b 3 20159 26AM
Slotting Mills • M94 Series
Recommended Starting Speeds
NOTE: FIRST choice starting speeds are in bold type.
As the average chip thickness increases, the speed should be decreased.
Slotting Mills
Recommended Starting Speeds [m/min]
Material
Group THM TTM/TTM08
P
1
–
–
– 560
490
460
2
–
–
– 345
280
245
3
–
–
– 345
280
245
4
–
–
– 280
195
180
5
–
–
– 360
280
260
6
–
–
– 165
130
115
M
1
–
–
– 330
195
130
2
–
–
– 195
115
80
3
–
–
– 215
130
100
K
1
395
295
245 –
–
–
2
410
330
230 –
–
–
3
425
310
195 –
–
–
N
1
2950
1970
1640 –
–
–
2
2245
1525
1265 –
–
–
3
1475
920
655 –
–
–
S
1
–
–
––
–
–
2
–
–
––
–
–
3
–
–
––
–
–
4
–
–
––
–
–
H
1
–
–
––
–
–
2
–
–
––
–
–
3
–
–
––
–
–
NOTE: Use “Light Machining” value as starting feed rate.
Recommended Starting Feeds [mm] Light
Machining
General
Purpose
Heavy
Machining
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
TCAX/TNAX 0,12
0,29
0,45 0,08
0,21
0,33 0,06
0,16
0,25 0,06
0,14
0,21 0,05
0,13
0,20 TCAX/TNAX
Recommended Starting Feeds
WID_Master16_IndexableMilling_SlottingCutters_L014_L015_Metric_REBRAND.indd 14 11/3/15 9:33 AM
Customer Application
Support (CAS)
ORIGINATING
COUNTRY LANGUAGE TEL FAX EMAIL
Australia English +61 001 724 539 6921 * 001 724 539 6830 * ap.techsupport@widia.com
Austria German 0800 291630 0049 911 9735 429* eu.techsupport@widia.com
Belgium English / French 0800 80410 0049 911 9735 429* eu.techsupport@widia.com
China Chinese +86 400 889 2237 +86 21 58999985 * w-cn.techsupport@widia.com
Denmark English +45 808 89295 001 724 539 6830 * na.techsupport@widia.com
Finland English 0800 919413 001 724 539 6830 * na.techsupport@widia.com
France Frensh +33 080 5540 379 0049 911 9735 429* eu.techsupport@widia.com
Germany German 0800 1015774 0911 9735 429* eu.techsupport@widia.com
India English +91 001 724539 6921 * 001 724 539 6830 * ap.techsupport@widia.com
Israel English +972 1809 449907 001 724 539 6830 * na.techsupport@widia.com
Italy Italian 800 916568 02 89512146 * eu.techsupport@widia.com
Japan English +81 001 724539 6921 * 001 724 539 6830 * ap.techsupport@widia.com
Korea (South) English +82 001 724539 6921 * 001 724 539 6830 * ap.techsupport@widia.com
Malaysia English +60 001 724539 6921 * 001 724 539 6830 * ap.techsupport@widia.com
Netherlands English 0800 0201131 001 724 539 6830 * na.techsupport@widia.com
New Zealand English +64 001 724539 6921 * 001 724 539 6830 * ap.techsupport@widia.com
Norway English 800 10081 001 724 539 6830 * na.techsupport@widia.com
Poland Polish 00800 4411943 06166 56504* eu.techsupport@widia.com
Russia (landline) Russian +7 8800 5556395 0048 6166 56504* eu.techsupport@widia.com
Russia (cell phone) Russian +7 8005556395 0048 6166 56504* eu.techsupport@widia.com
Singapore English +65 001 724539 6921 * 001 724 539 6830 * ap.techsupport@widia.com
South Africa English +27 0800 981644 001 724 539 6830 * na.techsupport@widia.com
Sweden English +46 020798794 001 724 539 6830 * na.techsupport@widia.com
Taiwan English +886 001 724539 6921 * 001 724 539 6830 * ap.techsupport@widia.com
Thailand English +66 001 724539 6921 * 001 724 539 6830 * ap.techsupport@widia.com
United Kingdom English +44 0800 028 2996 001 724 539 6830 * na.techsupport@widia.com
Ukraine Russian +380 0800502665 0048 6166 56504* eu.techsupport@widia.com
USA English 888 539 5145 001 724 539 6830 * na.techsupport@widia.com
Easy Access to Proven Metalworking Expertise!
WIDIA™ Customer Application Engineers assist customers and engineering groups
throughout the world with expert tool selection and application recommendations
for the entire range of WIDIA tooling.
For more information, contact your local WIDIA
Authorised Distributor or visit widia.com/services.
Phone and fax numbers marked with * are not toll free.
WID_Master16_IndexableMilling_SlottingCutters_L014_L015_Metric_REBRAND.indd 15 11/3/15 9:33 AM
L16
LViWID M 16 I d bl MIlli Sl i C L016 L017 M i REBRANDN b 10 20153 26PM
widia.com
• Cutters available in arbour mount.
• Inserts with four indexes.
• Staggered keyways in mounting bore, used for multiple
ganged cutters.
• Slot width 4–10mm.
• Three insert geometries available; SNHX in 11 and 12mm iC.
• Requires only one spare part.
• Economical to use.
• Available in Latest WIDIA™ Victory™ Grade.
Features and Benefi ts
M95
M95 Series Slotting Mills
M95 slotting cutters are ideal for deeper applications that require the
cutting load to be shared from one insert to the other. They provide
groove widths from 4–10mm and cutter diameters from 100–200mm
as well as an economical way to achieve balanced cutting.
WID_Master16_IndexableMIlling_SlottingCutters_L016_L017_Metric_REBRAND.indd 16 11/11/15 9:33 AM
L17
LViWID M 16 I d bl MIlli Sl i C L016 L017 M i REBRANDN b 1020153 26PM
widia.com
Slotting Mills
Pages: L18–L21
M95
Slot Width Range:
4–10mm
Indexes per insert: 4
Diameter: 100–200mm
P
M
K
Insert Offering
Inserts with free-cutting
geometry providing
low cutting forces.
SNHX
WID_Master16_IndexableMIlling_SlottingCutters_L016_L017_Metric_REBRAND.indd 17 11/11/15 9:33 AM
L18
LViWID M 16 I d bl Milli Sl i C L018 L019 M i REBRANDD b 17 20159 54AM
widia.com
Slotting Mills • M95 Series
Arbour Mount
Slotting Mills
Spare Parts
D1 B min
insert
screw Nm wrench bushing
100 4 12147548500 1,2 170.023 —
100 5 12147562300 1,2 170.023 12147676800
100 6 12147548600 5,0 170.025 12147676900
100 7 12147548600 5,0 170.025 12147676900
100 8 12147548600 5,0 170.025 12147676900
125 4 12147548500 1,2 170.023 —
125 5 12147562300 1,2 170.023 12147676800
125 6 12147548600 5,0 170.025 12147676900
125 7 12147548600 5,0 170.025 12147676900
125 8 12147548600 5,0 170.025 12147676900
125 10 12147572400 5,0 170.025 12147677000
160 4 12147548500 1,2 170.023 —
160 5 12147562300 1,2 170.023 12147676800
160 6 12147548600 5,0 170.025 12147676900
160 7 12147548600 5,0 170.025 12147676900
160 8 12147548600 5,0 170.025 12147676900
160 10 12147572400 5,0 170.025 12147677000
200 8 12147548600 5,0 170.025 12147676900
200 10 12147572400 5,0 170.025 12147677000
M95
order number catalogue number D1 D D6 B min CDX THUB Z Z S
coolant
supply kg
2016502 12299510400 100 27 48 4 25,0 12,0 12 6 No 0,3
2016514 12299515500 100 27 48 5 25,0 12,0 12 6 No 0,3
2016516 12299515600 100 27 48 6 25,0 12,0 10 5 No 0,3
2016518 12299515700 100 27 48 7 25,0 12,0 9 3 No 0,3
2016520 12299515800 100 27 48 8 25,0 12,0 9 3 No 0,4
2016524 12299520400 125 40 58 4 32,5 12,0 14 7 No 0,4
2016526 12299525500 125 40 58 5 32,5 12,0 14 7 No 0,4
2016528 12299525600 125 40 58 6 32,5 12,0 12 6 No 0,5
2016530 12299525700 125 40 58 7 32,5 12,0 12 4 No 0,5
2016532 12299525800 125 40 58 8 32,5 12,0 12 4 No 0,6
2016544 12299526000 125 40 58 10 32,5 12,0 12 6 No 0,6
2016547 12299530400 160 40 68 4 45,0 12,0 18 9 No 0,7
2022648 12299535500 160 40 68 5 45,0 12,0 18 9 No 0,7
2016551 12299535600 160 40 68 6 45,0 12,0 16 8 No 1,0
2022649 12299535700 160 40 68 7 45,0 12,0 15 5 No 1,0
2016555 12299535800 160 40 68 8 45,0 12,0 15 5 No 1,1
2022650 12299536000 160 40 68 10 45,0 12,0 16 8 No 1,2
2016562 12299546000 200 22 72 10 63,0 12,0 18 9 No 1,9
2022652 12299545800 200 50 72 8 63,0 12,0 18 6 No 1,6
WID_Master16_IndexableMilling_SlottingCutters_L018_L019_Metric_REBRAND.indd 18 12/17/15 9:54 AM
L19
LViWID M 16 I d bl Milli Sl i C L018 L019 M i REBRANDD b 1720159 54AM
widia.com
Slotting Mills • M95 Series
Inserts
Slotting Mills
Insert Selection Guide
Material
Group
Light
Machining
General
Purpose
Heavy
Machining
Geometry Grade Geometry Grade Geometry Grade
P1–P2
SNHX WP40PM
SNHX WP40PM
SNHX WP40PM
P3–P4
SNHX WP35CM
SNHX WP35CM
SNHX WP35CM
P5–P6
SNHX WP35CM
SNHX WP35CM
SNHX WP35CM
M1–M2
SNHX WP40PM
SNHX WP40PM
SNHX WP40PM
M3
SNHX WP35CM
SNHX WP35CM
SNHX WP35CM
K1–K2
SNHX WK15CM
SNHX WK15CM
SNHX WK15CM
K3
SNHX WP35CM
SNHX WP35CM
SNHX WP35CM
N1–N2
––
––
––
N3
––
––
––
S1–S2
––
––
––
S3
––
––
––
S4
––
––
––
H1
––
––
––
SNHX
SNHX • 12,7mm iC
catalogue number
cutting
edges D L10 S hm
WK15CM
WP35CM
WP40PM
123506601 4 12,70 12,70 3,18 0,08
5903650
5903674
5903646
rst choice
alternate choice
SNHX • 11mm iC
catalogue number
cutting
edges D L10 S hm
WK15CM
WP35CM
WP40PM
123506599 4 11,00 11,00 2,38 0,08
5903648
5903672
5903644
P
M
K
N
S
H
WID_Master16_IndexableMilling_SlottingCutters_L018_L019_Metric_REBRAND.indd 19 12/17/15 9:54 AM
L20
LViWID M 16 I d bl Milli Sl i C L020 L021 M i REBRANDO b 14 201510 00AM
widia.com
Slotting Mills • M95 Series
Inserts
SNHX • 11mm iC
catalogue number
cutting
edges D L10 S hm
WK15CM
WP35CM
WP40PM
123506600 4 11,00 11,00 2,70 0,08
5903649
5903673
5903645
Slotting Mills
SNHX
SNHX • 12,7mm iC
catalogue number
cutting
edges D L10 S hm
WK15CM
WP35CM
WP40PM
123506602 4 12,70 12,70 5,40 0,08
5903671
5903675
5903647
rst choice
alternate choice
P
M
K
N
S
H
WID_Master16_IndexableMilling_SlottingCutters_L020_L021_Metric_REBRAND.indd 20 10/29/15 2:09 PM
L21
LViWID M 16 I d bl Milli Sl i C L020 L021 M i REBRANDO b 14201510 00AM
widia.com
Slotting Mills • M95 Series
Recommended Starting Speeds
NOTE: FIRST choice starting speeds are in bold type.
As the average chip thickness increases, the speed should be decreased.
Slotting Mills
Recommended Starting Speeds [m/min]
Material
Group WK15CM WP35CM WP40PM
P
0
–
–
– 455
395
370 295
260
245
1
–
–
– 455
395
370 295
260
245
2
–
–
– 280
255
230 250
215
180
3
–
–
– 255
230
205 230
195
160
4
–
–
– 190
175
160 205
170
135
5
–
–
– 260
230
210 170
155
135
6
–
–
– 160
135
110 150
115
90
M
1
–
–
– 205
185
155 195
170
155
2
–
–
– 185
160
140 175
150
125
3
–
–
– 145
130
115 130
115
90
K
1
420
385
340 295
265
240 –
–
–
2
335
295
275 235
210
190 –
–
–
3
280
250
230 195
175
160 –
–
–
N
1
–
–
––
–
––
–
–
2
–
–
––
–
––
–
–
3
–
–
––
–
––
–
–
S
1
–
–
––
–
––
–
–
2
–
–
––
–
––
–
–
3
–
–
––
–
––
–
–
4
–
–
–66
50
33 –
–
–
H
1
–
–
––
–
––
–
–
2
–
–
––
–
––
–
–
3
–
–
––
–
––
–
–
NOTE: Use “Light Machining” value as starting feed rate.
Recommended Starting Feeds [mm] Light
Machining
General
Purpose
Heavy
Machining
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
SNHX 0,12
0,28
0,71 0,08
0,20
0,51 0,06
0,15
0,38 0,06
0,13
0,33 0,05
0,12
0,30 SNHX
Recommended Starting Feeds
WID_Master16_IndexableMilling_SlottingCutters_L020_L021_Metric_REBRAND.indd 21 10/29/15 2:09 PM
L22
LViWID M 16 I d bl MIlli Sl i C L022 L023 M i REBRANDN b 2 20152 47PM
widia.com
Adjustable cartridge.
Width range: 12–22mm.
Four cutting edges
per insert.
Inserts:
MDHX09T3: 09mm iC
MDHW1204: 12mm iC
Application
Benefi ts
Features
• Full slotting.
• Half slotting (left and right styles).
• Gang slotting.
• Shoulder milling.
• Face milling.
• Back face milling.
• Wide range of slot width options.
• High accuracy of slots.
• Security/stability of cartridge cutter.
• Wide range of mounting options.
• Multiple slots by gang slotting.
M900
• Insert geometries and grades for various
workpiece materials.
• Easy setting for desired width.
• Superior cartridge sliding mechanism.
• Available in arbour and shell mount.
• Two keyways for staggered slotting.
• Strong, reliable pocket seat.
WIDIA™ M900™ Series •
Adjustable Slotting Cutters
The WIDIA M900 Series is a multipurpose slotting cutter with high-precision capability
for numerous operations. The cutter is one of the most productive of its kind for slotting
and for cut-off operations. Two keyways in the cutter provide wide slot options by
mounting several cutters together in a gang-slotting style operation.
WID_Master16_IndexableMIlling_SlottingCutters_L022_L023_Metric_REBRAND.indd 22 11/3/15 10:12 AM
L23
LViWID M 16 I d bl MIlli Sl i C L022 L023 M i REBRANDN b 220152 47PM
widia.com
Slotting Mills
Pages: L24–L30, L32–L33
M900
™
Slot Width Range:
12–22mm
Indexes per insert: 2
Diameter: 100–315mm
P
M
K
S
Insert Offering
MDHX Geometry
iC 09mm
MDHW Geometry
iC 12mm
WID_Master16_IndexableMIlling_SlottingCutters_L022_L023_Metric_REBRAND.indd 23 11/3/15 10:12 AM
L24
LViWID M 16 I d bl Milli Sl i C L024 L025 M i REBRANDO b 14 201510 01AM
widia.com
Slotting Mills • M900™ Series
Arbour Mount • 9mm
D1
insert
screw
Torx
driver
STC
screw
T-handle
hex wrench
clamp
wedge
cartridge
left-hand
cartridge
right-hand
adjusting wedge
left-hand
adjusting wedge
right-hand
100 12148067200 12749726100 12148574100 12148050000 12748307600 12748210100 12748210200 12748551100 12748551200
100 12148067200 12749726100 12148574100 12148050000 12748307600 12748210300 12748210400 12748551100 12748551200
125 12148067200 12749726100 12148574100 12148050000 12748307600 12748210100 12748210200 12748551100 12748551200
125 12148067200 12749726100 12148574100 12148050000 12748307600 12748210300 12748210400 12748551100 12748551200
125 12148067200 12749726100 12148574100 12148050000 12748307700 12748210500 12748210600 12748551100 12748551200
160 12148067200 12749726100 12148574100 12148050000 12748307600 12748210300 12748210400 12748551100 12748551200
160 12148067200 12749726100 12148574100 12148050000 12748307700 12748210500 12748210600 12748551100 12748551200
200 12148067200 12749726100 12148574100 12148050000 12748307600 12748210100 12748210200 12748551100 12748551200
200 12148067200 12749726100 12148574100 12148050000 12748307600 12748210300 12748210400 12748551100 12748551200
200 12148067200 12749726100 12148574100 12148050000 12748307700 12748210500 12748210600 12748551100 12748551200
250 12148067200 12749726100 12148574100 12148050000 12748307700 12748210500 12748210600 12748551100 12748551200
315 12148067200 12749726100 12148574100 12148050000 12748307700 12748210500 12748210600 12748551100 12748551200
Spare Parts
Arbour Mount • 9mm
order number catalogue number D1 D D6 B min B max THUB Z max RPM
coolant
supply kg
2003598 12399010200 100 32 48 12 14 16,0 6 7070 No 0,5
2067540 12399011400 100 32 48 14 16 16,0 6 7070 No 0,8
2003695 12399010400 125 40 58 12 14 16,0 8 6370 No 0,8
2003696 12399011600 125 40 58 14 16 16,0 8 6370 No 0,9
2003697 12399012800 125 40 58 16 18 20,0 8 6370 No 1,1
2003796 12399011800 160 40 58 14 16 16,0 10 5600 No 1,6
2003797 12399013000 160 40 58 16 18 20,0 10 5600 No 1,9
2065591 12399010800 200 50 72 12 14 16,0 12 5040 No 2,1
2003879 12399012000 200 50 72 14 16 16,0 12 5040 No 2,6
2003880 12399013200 200 50 72 16 18 20,0 12 5040 No 2,9
2067541 12399013400 250 50 72 16 18 20,0 16 4480 No 7,0
2116241 12399013600 315 60 84 16 18 20,0 20 3990 No 7,6
Slotting Mills
WID_Master16_IndexableMilling_SlottingCutters_L024_L025_Metric_REBRAND.indd 24 10/29/15 2:09 PM
L25
LViWID M 16 I d bl Milli Sl i C L024 L025 M i REBRANDO b 14201510 01AM
widia.com
Slotting Mills • M900™ Series
Shell Mount • 9mm
Spare Parts
Shell Mount • 9mm
order number catalogue number D1 D D4 D6 B min B max L1 Z max RPM
coolant
supply kg
2003602 12399111400 100 27 — 48 14 16 33,0 6 7070 No 0,8
2003700 12399110400 125 32 — 58 12 14 37,0 8 6370 No 1,1
2003701 12399111600 125 32 — 58 14 16 37,0 8 6370 No 1,2
2003702 12399112800 125 32 — 58 16 18 37,0 8 6370 No 1,4
2003800 12399110600 160 40 — 70 12 14 42,0 10 5600 No 1,8
2003801 12399111800 160 40 — 70 14 16 42,0 10 5600 No 2,1
2003802 12399113000 160 40 — 70 16 18 42,0 10 5600 No 2,3
2003897 12399110800 200 40 67 90 12 14 44,0 12 5040 No 3,0
2003898 12399112000 200 40 67 90 14 16 44,0 12 5040 No 3,3
2003899 12399113200 200 40 67 90 16 18 44,0 12 5040 No 3,7
2003997 12399113400 250 60 102 130 16 18 50,0 16 4480 No 7,0
2004095 12399113600 315 60 102 130 16 18 50,0 20 3990 No 9,7
D1
insert
screw
Torx
driver
STC
screw
T-handle
hex wrench
clamp
wedge
cartridge
left-hand
cartridge
right-hand
adjusting wedge
left-hand
adjusting wedge
right-hand
125 12148067200 12749726100 12148574100 12148050000 12748307600 12748210100 12748210200 12748551100 12748551200
100 12148067200 12749726100 12148574100 12148050000 12748307600 12748210300 12748210400 12748551100 12748551200
125 12148067200 12749726100 12148574100 12148050000 12748307600 12748210100 12748210200 12748551100 12748551200
125 12148067200 12749726100 12148574100 12148050000 12748307700 12748210500 12748210600 12748551100 12748551200
160 12148067200 12749726100 12148574100 12148050000 12748307600 12748210100 12748210200 12748551100 12748551200
160 12148067200 12749726100 12148574100 12148050000 12748307600 12748210300 12748210400 12748551100 12748551200
160 12148067200 12749726100 12148574100 12148050000 12748307700 12748210500 12748210600 12748551100 12748551200
200 12148067200 12749726100 12148574100 12148050000 12748307600 12748210100 12748210200 12748551100 12748551200
200 12148067200 12749726100 12148574100 12148050000 12748307600 12748210300 12748210400 12748551100 12748551200
200 12148067200 12749726100 12148574100 12148050000 12748307700 12748210500 12748210600 12748551100 12748551200
250 12148067200 12749726100 12148574100 12148050000 12748307700 12748210500 12748210600 12748551100 12748551200
315 12148067200 12749726100 12148574100 12148050000 12748307700 12748210500 12748210600 12748551100 12748551200
Slotting Mills
WID_Master16_IndexableMilling_SlottingCutters_L024_L025_Metric_REBRAND.indd 25 10/29/15 2:09 PM
L26
LViWID M 16 I d bl Milli Sl i C L026 L027 M i REBRANDO b 14 201510 01AM
widia.com
Slotting Mills • M900™ Series
Inserts
Slotting Mills
Insert Selection Guide
P
M
K
N
S
H
MDHX
catalogue number
cutting
edges D D1 L10 M S R¡
WK15CM
WP25PM
WU35PM
WP35CM
WP40PM
MDHX09T308 2 9,53 3,40 9,55 1,85 3,97 0,80
5903706
5903722
5903710
5903708
5903704
rst choice
alternate choice
MDHX MDHX
Inserts • MDH..
Material
Group
Light
Machining
General
Purpose
Heavy
Machining
Geometry Grade Geometry Grade Geometry Grade
P1–P2
MDHX WP40PM
MDHX WP40PM
MDHX WP40PM
P3–P4
MDHX WP35CM
MDHX WP35CM
MDHX WP35CM
P5–P6
MDHX WP35CM
MDHX WP40PM
MDHX WU35PM
M1–M2
MDHX WP25PM
MDHX WP25PM
MDHX WU35PM
M3
MDHX WP35CM
MDHX WP40PM
MDHX WU35PM
K1–K2
MDHX WK15CM
MDHX WK15CM
MDHX WK15CM
K3
MDHX WK15CM
MDHX WP35CM
MDHX WP35CM
N1–N2
––
––
––
N3
––
––
––
S1–S2
MDHX WP25PM
MDHX WU35PM
MDHX WU35PM
S3
MDHX WU35PM
MDHX WU35PM
MDHX WU35PM
S4
MDHX WP25PM
MDHX WU35PM
MDHX WU35PM
H1
––
––
––
Recommended Starting Feeds
NOTE: Use “Light Machining” value as starting feed rate.
Recommended Starting Feeds [mm] Light
Machining
General
Purpose
Heavy
Machining
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
MDHX 0,12
0,23
0,46 0,08
0,17
0,33 0,06
0,13
0,25 0,06
0,11
0,22 0,05
0,10
0,20 MDHX
WID_Master16_IndexableMilling_SlottingCutters_L026_L027_Metric_REBRAND.indd 26 10/29/15 2:10 PM
L27
LViWID M 16 I d bl Milli Sl i C L026 L027 M i REBRANDO b 14201510 01AM
widia.com
Slotting Mills • M900™ Series
Arbour Mount • 12mm
Spare Parts
Arbour Mount • 12mm
order number catalogue number D1 D D6 B min B max THUB Z max RPM
coolant
supply kg
2003881 12399014400 200 50 72 18 20 20,0 12 5040 No 3,2
2003882 12399015600 200 50 72 20 22 24,0 12 3990 No 3,7
2003993 12399014600 250 50 72 18 20 20,0 16 4480 No 5,1
2003994 12399015800 250 50 72 20 22 24,0 16 3570 No 5,9
2004081 12399014800 315 60 84 18 20 20,0 20 3990 No 8,1
2004082 12399016000 315 60 84 20 22 24,0 20 3220 No 9,4
D1
insert
screw
Torx
driver
STC
screw
T-handle
hex wrench
clamp
wedge
cartridge
left-hand
cartridge
right-hand
adjusting wedge
left-hand
adjusting wedge
right-hand
200 12748605300 12749723200 12148574100 12148050000 12748307700 12748210700 12748210800 12748551100 12748551200
200 12748605300 12749723200 12148574100 12148050000 12748307800 12748210900 12748211000 12748551100 12748551200
250 12748605300 12749723200 12148574100 12148050000 12748307700 12748210700 12748210800 12748551100 12748551200
250 12748605300 12749723200 12148574100 12148050000 12748307800 12748210900 12748211000 12748551100 12748551200
315 12748605300 12749723200 12148574100 12148050000 12748307700 12748210700 12748210800 12748551100 12748551200
315 12748605300 12749723200 12148574100 12148050000 12748307800 12748210900 12748211000 12748551100 12748551200
Slotting Mills
WID_Master16_IndexableMilling_SlottingCutters_L026_L027_Metric_REBRAND.indd 27 10/29/15 2:10 PM
L28
LViWID M 16 I d bl Milli Sl i C L028 L029 M i REBRANDO b 14 201510 02AM
widia.com
Slotting Mills • M900™ Series
Arbour Mount • 12mm
D1
insert
screw
Torx
driver
STC
screw
T-handle
hex wrench
clamp
wedge
cartridge
left-hand
cartridge
right-hand
adjusting wedge
left-hand
adjusting wedge
right-hand
200 12748605300 12749723200 12148574100 12148050000 12748307700 12748210700 12748210800 12748551100 12748551200
200 12748605300 12749723200 12148574100 12148050000 12748307800 12748210900 12748211000 12748551100 12748551200
250 12748605300 12749723200 12148574100 12148050000 12748307700 12748210700 12748210800 12748551100 12748551200
250 12748605300 12749723200 12148574100 12148050000 12748307800 12748210900 12748211000 12748551100 12748551200
315 12748605300 12749723200 12148574100 12148050000 12748307700 12748210700 12748210800 12748551100 12748551200
315 12748605300 12749723200 12148574100 12148050000 12748307800 12748210900 12748211000 12748551100 12748551200
Spare Parts
Shell Mount • 12mm
order number catalogue number D1 D D4 D6 B min B max L1 Z max RPM
coolant
supply kg
2003900 12399114400 200 40 67 90 18 20 44,8 12 5040 No 3,8
2003901 12399115600 200 40 67 90 20 22 46,0 12 3990 No 4,3
2003998 12399114600 250 60 102 130 18 20 51,8 16 4480 No 7,2
2003999 12399115800 250 60 102 130 20 22 53,0 16 3570 No 7,9
2004096 12399114800 315 60 102 130 18 20 51,8 20 3990 No 10,2
2004097 12399116000 315 60 102 130 20 22 53,0 20 3220 No 11,3
Slotting Mills
WID_Master16_IndexableMilling_SlottingCutters_L028_L029_Metric_REBRAND.indd 28 10/29/15 2:10 PM
L29
LViWID M 16 I d bl Milli Sl i C L028 L029 M i REBRANDO b 14201510 02AM
widia.com
Slotting Mills • M900™ Series
Inserts
Slotting Mills
Insert Selection Guide
Material
Group
Light
Machining
General
Purpose
Heavy
Machining
Geometry Grade Geometry Grade Geometry Grade
P1–P2
MDHW WP40PM
MDHW WP40PM
MDHW WP40PM
P3–P4
MDHW WP35CM
MDHW WP35CM
MDHW WP35CM
P5–P6
MDHW WP35CM
MDHW WP40PM
MDHW WU35PM
M1–M2
MDHW WP25PM
MDHW WP25PM
MDHW WU35PM
M3
MDHW WP35CM
MDHW WP40PM
MDHW WU35PM
K1–K2
MDHW WK15CM
MDHW WK15CM
MDHW WK15CM
K3
MDHW WK15CM
MDHW WP35CM
MDHW WP35CM
N1–N2
––
––
––
N3
––
––
––
S1–S2
MDHW WP25PM
MDHW WU35PM
MDHW WU35PM
S3
MDHW WU35PM
MDHW WU35PM
MDHW WU35PM
S4
MDHW WP25PM
MDHW WU35PM
MDHW WU35PM
H1
––
––
––
P
M
K
N
S
H
Inserts • MDH..
MDHW
rst choice
alternate choice
MDHW MDHW
catalogue number
cutting
edges D D1 L10 M S R¡
WK15CM
WP25PM
WU35PM
WP35CM
WP40PM
MDHW120408 2 12,70 5,50 12,73 2,58 4,76 0,80
5903707
5903723
5903721
5903709
5903705
WID_Master16_IndexableMilling_SlottingCutters_L028_L029_Metric_REBRAND.indd 29 10/29/15 2:10 PM
widia.com
L30
LViWID M 16 I d bl Milli Sl i C L030 L031 M i REBRANDN b 10 20153 29PM
Slotting Mills • M900™ Series
Recommended Starting Speeds
NOTE: FIRST choice starting speeds are in bold type.
As the average chip thickness increases, the speed should be decreased.
Slotting Mills
Recommended Starting Speeds [m/min]
Material
Group WK15CM WP25PM WU35PM WP35CM WP40PM
P
0
–
–
– 330
285
270 260
230
215 455
395
370 295
260
245
1
–
–
– 330
285
270 260
230
215 455
395
370 295
260
245
2
–
–
– 275
240
200 220
190
160 280
255
230 250
215
180
3
–
–
– 255
215
175 200
170
140 255
230
205 230
195
160
4
–
–
– 225
185
150 180
150
120 190
175
160 205
170
135
5
–
–
– 185
170
150 150
135
120 260
230
210 170
155
135
6
–
–
– 165
125
100 130
100
80 160
135
110 150
115
90
M
1
–
–
– 205
180
165 170
150
135 205
185
155 195
170
155
2
–
–
– 185
160
130 155
130
110 185
160
140 175
150
125
3
–
–
– 140
120
95 115
100
80 145
130
115 130
115
90
K
1
420
385
340 230
205
185 –
–
– 295
265
240 –
–
–
2
335
295
275 180
160
150 –
–
– 235
210
190 –
–
–
3
280
250
230 150
135
120 –
–
– 195
175
160 –
–
–
N
1
–
–
––
–
––
–
––
–
––
–
–
2
–
–
––
–
––
–
––
–
––
–
–
3
–
–
––
–
––
–
––
–
––
–
–
S
1
–
–
–40
35
25 35
30
25 –
–
–40
35
30
2
–
–
–40
35
25 35
30
25 –
–
–40
35
30
3
–
–
–50
40
25 45
35
25 –
–
–50
40
30
4
–
–
–70
50
35 60
45
30 66
50
33 65
50
35
H
1
–
–
––
–
––
–
––
–
––
–
–
2
–
–
––
–
––
–
––
–
––
–
–
3
–
–
––
–
––
–
––
–
––
–
–
NOTE: Use “Light Machining” value as starting feed rate.
Recommended Starting Feeds [mm] Light
Machining
General
Purpose
Heavy
Machining
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
MDHW 0,12
0,23
0,46 0,08
0,17
0,33 0,06
0,13
0,25 0,06
0,11
0,22 0,05
0,10
0,20 MDHW
Recommended Starting Feeds
WID_Master16_IndexableMilling_SlottingCutters_L030_L031_Metric_REBRAND.indd 30 11/11/15 9:33 AM
LViWID M 16 I d bl Milli Sl i C L030 L031 M i REBRANDN b 1020153 29PM
Classes to Suit Everyone
Doing things the same way year after year can stall productivity. Continuing education
and training in the latest machining practices are necessary to stay competitive.
The Knowledge Center offers several ways to get trained: industry- and application-specifi c
courses, customer onsite programs, and online-based certifi ed metalcutting professional
courses. In-person classes include lecture, lab, and machining demonstrations.
Regional Training
The Regional Application Engineering Program is designed to provide a broad base of
knowledge for the selection and use of metalcutting tools. Instruction includes lecture-style
presentations and video demonstrations. Participants receive notes and text materials,
and the video demonstrations reinforce the theories presented in the lecture.
The Comprehensive Metalworking Application Course provides a broad base
of knowledge for the selection and use of metalcutting tools. Lecture-style
presentations and laboratory demonstrations enhance course material through
actual cutting tests and reinforce the theories presented in the lecture.
Metalcutting Application Training
WIDIA™ Knowledge Center
For more information, contact your local WIDIA
Authorised Distributor or visit widia.com/services.
WID_Master16_IndexableMilling_SlottingCutters_L030_L031_Metric_REBRAND.indd 31 11/11/15 9:33 AM
L32 widia.com
1. General
Assembly and Operating Instructions
2. Exploded Diagram of Spare Parts
3. Mounting the Cartridges in the Mill Body
The runout tolerance of the milling cutter has a decisive effect on the quality of workpieces and the life cycle of tools. Proper tool tting and the precise
axial setting of the milling insert are essential for a successful application and optimum results. One key requirement for assembly and setting work is that
all components are clean. Bearing surfaces must be free from grease, and only the threads of indexable insert clamping screws and double threaded screws
of clamping and adjusting wedges should be lubricated with copper grease. The indexable inserts should be inserted in the cleaned insert seats so that they
are positioned correctly on the bearing surfaces. The indexable insert clamping screws should be tightened with the speci ed torque.
3.1 Turn double threaded screw one turn clockwise in the adjusting wedge. Then insert both parts in the slot in the mill body and turn the double threaded
screw clockwise until the adjusting wedge is ush with the milling cutter.
3.2 Turn double threaded screw three turns clockwise in the mill body. Then mount the clamping wedge on the double threaded screw and screw both parts
together until the lower edge of the clamping wedge is at the same height as the chip space runout.
3.3 Push the top of the fully assembled cartridge into the mill body using the rear bearing surface of the milling cutter so that the cartridge slot makes contact
with the adjusting wedge spring. Ensure a perfect axial/radial surface.
3.4 Secure the correctly positioned cartridge by tightening the clamping wedge with a preset torque of MApre = 1 Nm to set the runout or cutting width.
Slotting Mills • M900™ Series
Assembly and Operating Instructions
Double threaded screws
Right-hand adjusting wedge
Right-hand cartridge, complete
Clamping wedge
Mill body
Clamping screw
Indexable insert
Left-hand cartridge
Left-hand adjusting wedge
3.4 3.3 3.2 3.1
WID_Master16_IndexableMilling_SlottingCutters_L032_L033_Metric_REBRAND.indd 32 10/29/15 2:10 PM
L33
widia.com
Slotting Mills • M900™ Series
Assembly and Operating Instructions
ATTENTION:
4. Setting the Runout for Milling Cutters with 2–3 Cutting Edges
5. Setting the Runout for Milling Cutters with 3 Cutting Edges
4.1 Possible interpretations of the measuring dimension C.
4.2 Set gage to desired measurement C using gage blocks set to 0.
4.3 Set cartridge to ~0,1mm before nal measurement. Clamping wedge is tightened with torque MApre = 1 Nm.
Then brie y loosen clamping wedge and tighten again.
4.4 Set cartridge to 0,02mm before nal measurement. Then brie y loosen clamping wedge so that the contact
surfaces can level out. Tighten clamping.
4.4 Wedge again with torque MApre = 1 Nm.
4.5 Adjust cartridge to nal measurement. Tighten clamping wedge with torque MA = 4 Nm.
Check runout of the fully adjusted milling cutter.
The cutting widths for milling cutters with three cutting edges are set using purpose-designed optical tool presetting equipment. Note that
the projection of the cartridges from the mill body must be almost exactly the same on both sides. The sequence of steps required for
setting the cartridge is identical to those for tools with two cutting edges.
At each tool adjustment, the body, cartridges, indexable inserts, and spare parts must be checked and replaced if necessary.
Before each tool use, the clamping and double threaded screws must be tightened with the speci ed torque. The tools must only
be used in accordance with their function. We accept no liability for their improper use. Changes of any kind and/or printing errors
are not valid grounds for claims.
4.5 4.4 4.3 4.2 4.1
WID_Master16_IndexableMilling_SlottingCutters_L032_L033_Metric_REBRAND.indd 33 10/29/15 2:10 PM
LViWID M 16 I d bl MIlli C Mill M000 M001 M i REBRANDN b 12 20158 41AM
WID_Master16_IndexableMIlling_CopyMills_M000_M001_Metric_REBRAND.indd 1 11/12/15 8:54 AM
M1
LViWID M 16 I d bl MIlli C Mill M000 M001 M i REBRANDN b 1220158 41AM
widia.com
M370 • High-Feed Double-Sided Platform ..................................................................................................... M2–M16
M200 • Double-Sided Round Inserts ............................................................................................................ M18–M39
M170 • Round Inserts, Ideal for Die and Mould Applications .................................................................... M40–M70
M100 • Positive Round Inserts ...................................................................................................................... M72–M99
M270 • Indexable Ball Nose and Toroidal Inserts for Complex Parts ................................................... M100–M130
Indexable Milling • Copy Mills
WID_Master16_IndexableMIlling_CopyMills_M000_M001_Metric_REBRAND.indd 1 11/12/15 8:54 AM
M2
LViWID M 16 I d bl MIlli C Mill M002 M003 M i REBRANDO b 26 201511 05AM
widia.com
Profi led tool for
maximum chip
evacuation.
Through tool
coolant.
Six cutting edges
per insert.
High-strength tool
body design.
• Double-sided design offers six cutting edges per insert.
• Extremely high metal removal rates.
• First choice for high-feed roughing applications.
M370
Designed for high feed rate productivity, M370 Series provides
the latest insert technology with outstanding performance and
reliability. Its double-sided concept and six cutting edges provide
security and optimal metal removal with an effi cient cost per edge.
High-Feed Applications •
M370™ Series
WID_Master16_IndexableMIlling_CopyMills_M002_M003_Metric_REBRAND.indd 2 10/29/15 2:14 PM
M3
LViWID M 16 I d bl MIlli C Mill M002 M003 M i REBRANDO b 26201511 05AM
widia.com
Copy Mills M370™
Max depth of cut: up to 2mm
Indexes per insert: 6
Diameter: 25–125mm
Pages: M4–M16
P
M
K
S
H
Insert Offering
8mm iC Insert WOEJ0804
Up to 1,3mm Ap max
Diameter range 25–80mm
12mm iC Insert WOEJ1207
Up to 2mm Ap max
Diameter range 42–125mm
WID_Master16_IndexableMIlling_CopyMills_M002_M003_Metric_REBRAND.indd 3 10/29/15 2:14 PM
M4
LViWID M 16 I d bl MIlli C Mill M004 M005 M i REBRANDO b 14 201510 11AM
widia.com
Copy Mills • M370™ Series
iC08 • Screw-On End Mills
D1 max
insert
screw Nm
Torx
driver
25 MS2219 1,8 DT9IP
32 MS2219 1,8 DT9IP
42 MS2219 1,8 DT9IP
Spare Parts
Screw-On End Mills
order number catalogue number D1 max D1 D DPM G3X L2 WF Ap1 max Z
max
ramp
angle max RPM
coolant
supply kg
4056186 M370D025Z02M12WO08 25 11 21 12,5 M12 35 17 1,3 2 2.1° 46000 Yes 0,09
4170918 M370D025Z03M12WO08 25 11 21 12,5 M12 35 17 1,3 3 2.1° 46000 Yes 0,09
4056187 M370D032Z04M16WO08 32 18 29 17,0 M16 43 24 1,3 4 1.4° 38700 Yes 0,21
4056188 M370D042Z05M16WO08 42 28 29 17,0 M16 43 24 1,3 5 1.0° 32500 Yes 0,57
Copy Mills
• Double-sided, six cutting edges.
• Highest metal removal rates.
• First choice for roughing applications.
WID_Master16_IndexableMIlling_CopyMills_M004_M005_Metric_REBRAND.indd 4 10/29/15 2:14 PM
M5
LViWID M 16 I d bl MIlli C Mill M004 M005 M i REBRANDO b 14201510 11AM
widia.com
Copy Mills • M370™ Series
iC08 • Cylindrical End Mills
Spare Parts
Cylindrical End Mills
order number catalogue number D1 max D1 D L LBX Ap1 max Z max RPM
coolant
supply kg
4056189 M370D025Z03A25WO08L150 25 11 25 150 40 1,3 3 46000 Yes 0,50
4008281 M370D025Z02A25WO08L200 25 11 25 200 50 1,3 2 46000 Yes 0,68
4170919 M370D025Z03A25WO08L200 25 11 25 200 40 1,3 3 46000 Yes 0,69
4170920 M370D025Z02A25WO08L300 25 11 25 300 40 1,3 2 46000 Yes 1,08
4056190 M370D028Z03A25WO08L200 28 14 25 200 40 1,3 3 42400 Yes 0,70
4056192 M370D032Z04A32WO08L200 32 18 32 200 50 1,3 4 38700 Yes 1,14
4056191 M370D032Z04A32WO08L150 32 18 32 150 40 1,3 4 38700 Yes 0,84
4170921 M370D032Z03A32WO08L300 32 18 32 300 40 1,3 3 38700 Yes 0,84
• Double-sided, six cutting edges.
• Highest metal removal rates.
• First choice for roughing applications.
Copy Mills
D1 max
insert
screw Nm wrench
25 MS2219 1,8 DT9IP
28 MS2219 1,8 DT9IP
32 MS2219 1,8 DT9IP
WID_Master16_IndexableMIlling_CopyMills_M004_M005_Metric_REBRAND.indd 5 10/29/15 2:14 PM
M6
LViWID M 16 I d bl MIlli C Mill M006 M007 M i REBRANDO b 14 201510 11AM
widia.com
Copy Mills • M370™ Series
iC08 • Shell Mills
D1 max
insert
screw Nm
Torx Plus
driver
socket-head
cap screw
socket-head cap screw
with coolant groove
40 MS2219 1,8 DT9IP 125.825 MS1294CG
50 MS2219 1,8 DT9IP 12146120500 MS1234CG
52 MS2219 1,8 DT9IP 12146120500 MS1234CG
63 MS2219 1,8 DT9IP 12146120500 MS1234CG
66 MS2219 1,8 DT9IP MS2038 MS2038CG
80 MS2219 1,8 DT9IP MS2038 MS2038CG
Spare Parts
Shell Mills
order number catalogue number D1 max D1 D D6 L Ap1 max Z max RPM
coolant
supply kg
4056193 M370D040Z04WO08 40 26 16 37 40 1,3 4 33500 Yes 0,19
4170922 M370D040Z05WO08 40 26 16 37 40 1,3 5 33500 Yes 0,19
4008276 M370D050Z05WO08 50 36 22 44 40 1,3 5 29200 Yes 0,29
4171223 M370D050Z06WO08 50 36 22 44 40 1,3 6 29200 Yes 0,29
4171224 M370D052Z06WO08 52 38 22 44 50 1,3 6 28600 Yes 0,40
4056194 M370D052Z05WO08 52 38 22 44 50 1,3 5 28600 Yes 0,41
4056195 M370D063Z06WO08 63 49 22 60 50 1,3 6 25500 Yes 0,74
4008277 M370D066Z06WO08 66 52 27 60 50 1,3 6 24900 Yes 0,77
4171225 M370D080Z07WO08 80 66 27 60 50 1,3 7 24900 Yes 2,36
Copy Mills
D6
D
L
Ap1 max
D1 max
D1
• Double-sided, six cutting edges.
• Highest metal removal rates.
• First choice for roughing applications.
NOTE: Socket-head cap screw with coolant groove must be ordered separately.
WID_Master16_IndexableMIlling_CopyMills_M006_M007_Metric_REBRAND.indd 6 10/29/15 2:14 PM
M7
LViWID M 16 I d bl MIlli C Mill M006 M007 M i REBRANDO b 14201510 11AM
widia.com
Copy Mills • M370™ Series
Inserts
Copy Mills
Insert Selection Guide
Material
Group
Light
Machining
General
Purpose
Heavy
Machining
Geometry Grade Geometry Grade Geometry Grade
P1–P2
..MM WP40PM
..MM WP40PM
..MM WP40PM
P3–P4
..MM WP25PM
..MM WP40PM
..MH WP40PM
P5–P6
..MM WP25PM
..MH WP25PM
..MH WP40PM
M1–M2
..MM WP25PM
..MM WS30PM
..MM WP40PM
M3
..MM WP25PM
..MM WP25PM
..MM WP40PM
K1–K2
..MH WK15CM
..MH WK15CM
..MH WK15CM
K3
..MH TN6520
..MH TN6520
..MH WK15CM
N1–N2
––
––
––
N3
––
––
––
S1–S2
..MM WP25PM
..MM WS30PM
..MM WP40PM
S3
..MM WS30PM
..MM WS30PM
..MM WP40PM
S4
..MM WS30PM
..MM WP40PM
..MM WP40PM
H1
..MH WP25PM
––
––
• -MM geometry provides lower cutting forces. First choice for steel,
stainless steel, and high-temp alloys.
rst choice
alternate choice
WOEJ-MM
WOEJ-MM
catalogue number
cutting
edges D S R¡
TN6520
TN6525
TN7535
WK15CM
WP25PM
WS30PM
WP40PM
WOEJ080412SRMM 6 7,79 4,70 1,22
–
4113892
4113916
–
5564597
5520248
5544753
• -MH geometry is the rst choice for high-strength steel and cast iron.
WOEJ-MH
catalogue number
cutting
edges D S R¡
TN6520
TN6525
TN7535
WK15CM
WP25PM
WS30PM
WP40PM
WOEJ080412SRMH 6 7,79 4,75 1,22
4136480
4052411
4068517
5427443
5564596
–
5544752
WOEJ-MH
iC08 • Inserts • WO.J0804...
P
M
K
N
S
H
WID_Master16_IndexableMIlling_CopyMills_M006_M007_Metric_REBRAND.indd 7 10/29/15 2:14 PM
M8
LViWID M 16 I d bl MIlli C Mill M008 M009 M i REBRANDO b 14 201510 11AM
widia.com
Copy Mills • M370™ Series
Recommended Starting Speeds
Copy Mills
Recommended Starting Speeds [m/min]
Material
Group TN6520 TN6525 TN7535 WK15CM
P
1
–
–
– 410
320
280 545
475
445 –
–
–
2
–
–
– 320
250
215 335
305
275 –
–
–
3
–
–
– 280
215
185 305
275
245 –
–
–
4
–
–
– 235
170
145 230
210
190 –
–
–
5
–
–
– 310
235
200 310
275
250 –
–
–
6
–
–
– 205
160
130 190
160
130 –
–
–
M
1
–
–
– 190
120
80 245
220
185 –
–
–
2
–
–
– 120
80
50 220
190
170 –
–
–
3
–
–
– 125
80
55 175
155
140 –
–
–
K
1
450
320
230 275
245
220 355
320
290 505
460
410
2
390
250
190 215
190
180 280
250
230 400
355
330
3
300
230
160 180
160
145 235
210
190 335
300
275
N
1
–
–
––
–
––
–
––
–
–
2
–
–
––
–
––
–
––
–
–
3
–
–
––
–
––
–
––
–
–
S
1
–
–
––
–
––
–
––
–
–
2
–
–
––
–
––
–
––
–
–
3
–
–
––
–
––
–
––
–
–
4
–
–
––
–
––
–
––
–
–
H
1
–
–
––
–
––
–
––
–
–
2
–
–
––
–
––
–
––
–
–
3
–
–
––
–
––
–
––
–
–
(continued)
WID_Master16_IndexableMIlling_CopyMills_M008_M009_Metric_REBRAND.indd 8 10/29/15 2:14 PM
M9
LViWID M 16 I d bl MIlli C Mill M008 M009 M i REBRANDO b 14201510 11AM
widia.com
Copy Mills • M370™ Series
Recommended Starting Speeds
NOTE: FIRST choice starting speeds are in bold type.
As the average chip thickness increases, the speed should be decreased.
Copy Mills
Material
Group WP25PM WS30PM WP40PM
P
1
395
340
325 –
–
– 355
310
295
2
330
290
240 –
–
– 300
260
215
3
305
260
210 –
–
– 275
235
190
4
270
220
180 –
–
– 245
205
160
5
220
205
180 –
–
– 205
185
160
6
200
150
120 –
–
– 180
140
110
M
1
245
215
200 270
240
220 235
205
185
2
220
190
155 245
215
175 210
180
150
3
170
145
115 185
160
125 155
140
110
K
1
275
245
220 –
–
––
–
–
2
215
190
180 –
–
––
–
–
3
180
160
145 –
–
––
–
–
N
1
–
–
––
–
––
–
–
2
–
–
––
–
––
–
–
3
–
–
––
–
––
–
–
S
1
50
40
30 55
50
35 50
40
35
2
50
40
30 55
50
35 50
40
35
3
60
50
30 65
55
35 60
50
35
4
85
60
40 100
70
50 80
60
40
H
1
145
110
85 –
–
––
–
–
2
–
–
––
–
––
–
–
3
–
–
––
–
––
–
–
NOTE: Use “Light Machining” value as starting feed rate.
Recommended Starting Feeds [mm] Light
Machining
General
Purpose
Heavy
Machining
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
..MM 0,90
1,67
4,09 0,65
1,19
2,83 0,48
0,88
2,08 0,42
0,77
1,80 0,38
0,70
1,64 ..MM
..MH 0,90
2,34
5,00 0,65
1,66
3,41 0,48
1,23
2,49 0,42
1,07
2,16 0,38
0,98
1,97 ..MH
For Plunging Applications
Recommended Starting Feeds
(Recommended Starting Speeds [m/min] — continued)
WID_Master16_IndexableMIlling_CopyMills_M008_M009_Metric_REBRAND.indd 9 10/29/15 2:14 PM
M10
LViWID M 16 I d bl MIlli C Mill M010 M011 M i REBRANDO b 14 201510 12AM
widia.com
The high-feed concept bases its strategy on small depth of cut
and higher fz values, which results in a higher MRR and productivity
with low radial forces.
Small Ap1 values and higher feed
rates generate lower cutting forces
versus traditional milling strategies.
For CAM programming, the tools
can be programmed as a toroidal
tool type by using the Rt value as
the insert radius.
Recommended when long
overhang is necessary due to
lower radial forces. Maximum
L/D ratio of 10 x D.
Cutter
Diameter
General Programming Information for Applying M370
Applying High-Feed Tools
Maximum Linear Ramping and Helical Interpolation from Solid • Metric
Rt
t
Wt
Wt
Hole
Diameter
Ap1 max
Copy Mills • M370™ Series
Additional Application Advice • WO.J0804...
L/D ratio starting Ap1 starting fz range
<3 0,9mm 1–1,3mm
>3–<5 0,6mm 1–1,3mm
>5–<7 0,4mm 0,6–1mm
cutter diameter
max linear ramp angle
(straight line)
min hole
diameter
max hole
diameter
Ap1 max
per revolution
25 3,1° 30,2 49,5 1,25
28 2,6° 36,1 55,5 1,25
32 2,9° 44,1 63,5 1,25
40 1,6° 60 79,5 1,25
42 1,5° 64 83,5 1,25
50 1,3° 80 99,5 1,25
52 1,2° 84 103,5 1,25
63 1° 106 125,5 1,25
66 1° 112 131,5 1,25
80 0,8° 140 155,5 1,25
Rt t Wt
2,5mm 1mm 7,5mm
WID_Master16_IndexableMIlling_CopyMills_M010_M011_Metric_REBRAND.indd 10 10/29/15 2:14 PM
M11
LViWID M 16 I d bl MIlli C Mill M010 M011 M i REBRANDO b 14201510 12AM
widia.com
Copy Mills • M370™ Series
iC12 • Screw-On End Mills
Spare Parts
Screw-On End Mills
order number catalogue number D1 max D1 D DPM G3X L2 WF Ap1 max Z
max
ramp
angle max RPM
coolant
supply kg
5338912 M370D42Z03M16WO12 42 25 29 17,0 M16 40 24 2,0 3 5.1° 21310 Yes 0,22
• Double-sided, six cutting edges.
• Highest metal removal rates.
• First choice for roughing applications.
D1 max
insert
screw Nm
Torx
driver
42 MS2085 4,0 DT15IP
Copy Mills
WID_Master16_IndexableMIlling_CopyMills_M010_M011_Metric_REBRAND.indd 11 10/29/15 2:15 PM
M12
LViWID M 16 I d bl MIlli C Mill M012 M013 M i REBRANDO b 14 201510 12AM
widia.com
Copy Mills • M370™ Series
iC12 • Shell Mills
D1 max
insert
screw Nm
Torx Plus
driver
socket-head
cap screw
socket-head cap screw
with coolant groove
coolant
lock screw
coolant lock
screw assembly
50 MS2085 4,0 DT15IP 12146120500 MS1234CG — —
52 MS2085 4,0 DT15IP 12146120500 MS1234CG — —
63 MS2085 4,0 DT15IP 125.025 MS1234CG — —
66 MS2085 4,0 DT15IP 125.230 MS2038CG — —
80 MS2085 4,0 DT15IP 125.230 MS2038CG — —
100 MS2085 4,0 DT15IP — — KLS32M MS2195C
125 MS2085 4,0 DT15IP — — KLS40M MS2187C
Spare Parts
Shell Mills
order number catalogue number D1 max D1 D D6 L Ap1 max Z max RPM
coolant
supply kg
5338913 M370D50Z04WO12 50,0 33 22 42 50 2,0 4 19530 Yes 0,38
5338914 M370D52Z04WO12 52,0 35 22 49 50 2,0 4 19160 Yes 0,47
5338915 M370D63Z04WO12 63,0 46 22 49 50 2,0 4 17400 Yes 0,57
5338916 M370D63Z05WO12 63,0 46 22 49 50 2,0 5 17400 Yes 0,57
5338917 M370D66Z05WO12 66,0 49 27 60 50 2,0 5 17000 Yes 0,79
5338918 M370D80Z05WO12 80,0 63 27 60 50 2,0 5 15440 Yes 0,94
5338919 M370D80Z06WO12 80,0 63 27 60 50 2,0 6 15440 Yes 0,94
5338920 M370D100Z06WO12 100,0 83 32 78 50 2,0 6 13810 Yes 1,56
5338921 M370D100Z07WO12 100,0 83 32 78 50 2,0 7 13810 Yes 1,57
5338922 M370D125Z07WO12 125,0 108 40 90 63 2,0 7 12350 Yes 2,92
5338923 M370D125Z09WO12 125,0 108 40 90 63 2,0 9 12350 Yes 2,94
Copy Mills
• Double-sided, six cutting edges.
• Highest metal removal rates.
• First choice for roughing applications.
NOTE: Socket-head cap screw with coolant groove and coolant lock screw assembly must be ordered separately.
WID_Master16_IndexableMIlling_CopyMills_M012_M013_Metric_REBRAND.indd 12 10/29/15 2:15 PM
M13
LViWID M 16 I d bl MIlli C Mill M012 M013 M i REBRANDO b 14201510 12AM
widia.com
Copy Mills • M370™ Series
Inserts
Copy Mills
Insert Selection Guide
Material
Group
Light
Machining
General
Purpose
Heavy
Machining
Geometry Grade Geometry Grade Geometry Grade
P1–P2
.S..MM WU35PM
.S..MM WP40PM
.S..MM WP40PM
P3–P4
.S..MM WP25PM
.S..MM WP25PM
.S..MH WP40PM
P5–P6
.S..MM WP25PM
.S..MM WP35CM
.S..MH WP35CM
M1–M2
.S..MM WS30PM
.S..MM WU35PM
.S..MM WP40PM
M3
.S..MM WP25PM
.S..MM WP35CM
.S..MM WP40PM
K1–K2
.S..MH WK15CM
.S..MH WK15CM
.S..MH WP20CM
K3
.S..MH WK15CM
.S..MH WK15CM
.S..MH WP20CM
N1–N2
––
––
––
N3
––
––
––
S1–S2
.S..MM WS30PM
.S..MM WU35PM
.S..MM WP40PM
S3
.S..MM WS30PM
.S..MM WU35PM
.S..MM WP40PM
S4
.S..MM WS30PM
.S..MM WU35PM
.S..MM WP40PM
H1
.S..MH WP35CM
.S..MR WP25PM
––
• -MM geometry provides lower cutting forces. First choice for steel,
stainless steel, and high-temp alloys.
rst choice
alternate choice
WOEJ-MM
WOEJ-MM
catalogue number
cutting
edges D S R¡
WK15CM
WP20CM
WP25PM
WU35PM
WP35CM
WS30PM
WP40PM
WOEJ120712SRMM 6 12,00 7,30 1,27
–
5419790
5419648
5419649
5419791
5520249
5542346
WOEJ-MH
catalogue number
cutting
edges D S R¡
WK15CM
WP20CM
WP25PM
WU35PM
WP35CM
WS30PM
WP40PM
WOEJ120712SRMH 6 12,00 7,30 1,27
5338860
5338861
5338818
5338819
5338862
–
5542347
• -MH geometry is the rst choice for high-strength steel and cast iron.
WOEJ-MH
iC12 • Inserts • WO.J1207…
P
M
K
N
S
H
• -MR geometry is designed for heavy-duty steel and cast iron applications.
WID_Master16_IndexableMIlling_CopyMills_M012_M013_Metric_REBRAND.indd 13 10/29/15 2:15 PM
M14
LViWID M 16 I d bl MIlli C Mill M014 M015 M i REBRANDO b 14 201510 12AM
widia.com
Copy Mills • M370™ Series
P
M
K
N
S
H
iC12 • Indexable Inserts • WO.J1207…
WOEJ-MR
catalogue number
cutting
edges D S R¡
WK15CM
WP20CM
WP25PM
WU35PM
WP35CM
WS30PM
WP40PM
WOEJ120712SRMR 6 12,00 7,30 1,27
–
–
5698343
–
–
–
5698342
Copy Mills
DS
5º
Rε
rst choice
alternate choice
WOEJ-MR
Recommended Starting Speeds
Recommended Starting Speeds [m/min]
Material
Group WK15CM WP20CM WP25PM WU35PM
P
1
–
–
– 660
580
540 395
340
325 310
275
260
2
–
–
– 410
370
330 330
290
240 265
230
190
3
–
–
– 370
330
305 305
260
210 240
205
170
4
–
–
– 275
260
230 270
220
180 215
180
145
5
–
–
– 330
300
275 220
205
180 180
160
145
6
–
–
– 230
205
175 200
150
120 155
120
95
M
1
–
–
– 270
240
210 245
215
200 205
180
160
2
–
–
– 245
210
190 220
190
155 185
155
130
3
–
–
– 190
175
150 170
145
115 140
120
95
K
1
505
460
410 430
390
355 275
245
220 –
–
–
2
400
355
330 340
305
280 215
190
180 –
–
–
3
335
300
275 290
260
240 180
160
145 –
–
–
N
1
–
–
––
–
––
–
––
–
–
2
–
–
––
–
––
–
––
–
–
3
–
–
––
–
––
–
––
–
–
S
1
–
–
––
–
–50
40
30 40
35
30
2
–
–
––
–
–50
40
30 40
35
30
3
–
–
––
–
–60
50
30 55
40
30
4
–
–
––
–
–85
60
40 70
55
35
H
1
–
–
– 170
140
115 145
110
85 –
–
–
2
–
–
––
–
––
–
––
–
–
3
–
–
––
–
––
–
––
–
–
(continued)
WID_Master16_IndexableMIlling_CopyMills_M014_M015_Metric_REBRAND.indd 14 10/29/15 2:15 PM
M15
LViWID M 16 I d bl MIlli C Mill M014 M015 M i REBRANDO b 14201510 12AM
widia.com
Copy Mills • M370™ Series
Recommended Starting Speeds
NOTE: FIRST choice starting speeds are in bold type.
As the average chip thickness increases, the speed should be decreased.
Material
Group WP35CM WS30PM WP40PM
P
1
545
475
445 –
–
– 355
310
295
2
335
305
275 –
–
– 300
260
215
3
305
275
245 –
–
– 275
235
190
4
230
210
190 –
–
– 245
205
160
5
310
275
250 –
–
– 205
185
160
6
190
160
130 –
–
– 180
140
110
M
1
245
220
185 270
240
220 235
205
185
2
220
190
170 245
215
175 210
180
150
3
175
155
140 185
160
125 155
140
110
K
1
355
320
290 –
–
––
–
–
2
280
250
230 –
–
––
–
–
3
235
210
190 –
–
––
–
–
N
1
–
–
––
–
––
–
–
2
–
–
––
–
––
–
–
3
–
–
––
–
––
–
–
S
1
–
–
–55
50
35 50
40
35
2
–
–
–55
50
35 50
40
35
3
–
–
–65
55
35 60
50
35
4
80
60
40 100
70
50 80
60
40
H
1
–
–
––
–
––
–
–
2
–
–
––
–
––
–
–
3
–
–
––
–
––
–
–
Copy Mills
(Recommended Starting Speeds [m/min] — continued)
NOTE: Use “Light Machining” value as starting feed rate.
Recommended Starting Feeds [mm] Light
Machining
General
Purpose
Heavy
Machining
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
..MM 0,90
1,87
3,62 0,65
1,33
2,52 0,48
0,99
1,86 0,42
0,86
1,61 0,39
0,79
1,47 ..MM
..MH 0,90
2,35
4,97 0,65
1,67
3,40 0,48
1,23
2,48 0,42
1,07
2,15 0,39
0,98
1,96 ..MH
..MR 0,90
2,81
5,44 0,65
1,97
3,69 0,48
1,46
2,69 0,42
1,27
2,33 0,39
1,16
2,13 ..MR
For All Other Applications
Recommended Starting Feeds
WID_Master16_IndexableMIlling_CopyMills_M014_M015_Metric_REBRAND.indd 15 10/29/15 2:15 PM
widia.com
M16
LViWID M 16 I d bl MIlli C Mill M016 M017 M i REBRANDN b 30 201511 14AM
Copy Mills • M370™ Series
Additional Application Advice • WO.J1207...
The high-feed concept bases its strategy on small depth of cut
and higher fz values, which results in a higher MRR and productivity
with low radial forces.
Small Ap1 values and higher feed
rates generate lower cutting forces
versus traditional milling strategies.
For CAM programming, the tools
can be programmed as a toroidal
tool type by using the Rt value as
the insert radius.
Recommended when long
overhang is necessary due to
lower radial forces. Maximum
L/D ratio of 10 x D.
General Programming Information for Applying M370
Applying High-Feed Tools
Maximum Linear Ramping and Helical Interpolation from Solid • Metric
Wt
Rt
t
Wt
Ap1 max
diameter
max
ramp angle
max ramp
angle for 360°
helical interpolation
max
plunge depth
min hole
diameter
(DH min)
max fl at-bottom
hole diameter
(DH1 max)
max diameter
(no fl at bottom)
42 5,1° 1,44° 1,66 57,36 65,29 84
50 3,7° 1,09° 1,66 73,07 81,24 100
52 3,5° 1,03° 1,66 77,03 85,24 104
63 2,6° 0,78° 1,66 98,88 107,20 126
66 2,4° 0,74° 1,66 104,85 113,20 132
80 1,8° 0,57° 1,66 132,77 141,18 160
100 1,3° 0,43° 1,66 172,70 181,16 200
125 1,0° 0,33° 1,66 222,66 231,15 250
CAM programming information
Rt Wt t
mm value 3,2 9 1,4
WID_Master16_IndexableMIlling_CopyMills_M016_M017_Metric_REBRAND.indd 16 11/30/15 11:15 AM
• Find a Local WIDIA™ Authorized Distributor near you.
• Contact our Customer Application Support team for technical support
and product recommendations.
• Log in to NOVO™ for instant access to inventory availability, application
recommendations, CAD drawings, and 3D models.
• Purchase WIDIA-branded merchandise.
• Get social with us on Facebook, Twitter, Instagram, YouTube, and more!
Visit our homepage at widia.com to:
You can also use our NOVO app to guide you to the
correct choice!
For more information, please visit widia.com/novo.
NOVO: The Digital Source for Delivering
Smart Machining Solutions
For more information, contact your local WIDIA
Authorised Distributor or visit widia.com/services.
On the Web
We are here to serve you.
WID_Master16_IndexableMIlling_CopyMills_M016_M017_Metric_REBRAND.indd 17 11/30/15 11:15 AM
M18
LViWID M 16 I d bl MIlli C Mill M018 M019 M i REBRANDN b 10 20153 32PM
widia.com
Higher clearance in bodies to
permit pocketing, profi ling,
and 5-axis machining.
Screw-on, end mill, and
shell mill cutters with
internal coolant.
Easy-to-use and unique
anti-rotation feature for
excellent stability for higher
feed rates and cutting forces.
Three different insert sizes and three insert topography
styles with the new WIDIA Victory milling grades cover
any type of component and application.
• Up to 12 cutting edges per insert.
• Effective anti-rotation feature.
• Able to apply in all type of materials and milling applications.
• Latest WIDIA™ Victory™ grades offered.
M200
Revolutionary double-sided round insert, capable of running in multiple
types of milling operations and workpiece materials, increases
customer’s productivity with the most effi cient cost per edge.
Double-Sided Round Insert •
M200™ Series
WID_Master16_IndexableMIlling_CopyMills_M018_M019_Metric_REBRAND.indd 18 11/11/15 9:35 AM
M19
LViWID M 16 I d bl MIlli C Mill M018 M019 M i REBRANDN b 1020153 32PM
widia.com
Copy Mills M200™
Max depth of cut: up to 5mm
Indexes per insert: up to 12
Diameter: 25–125mm
Pages: M20–M39
P
M
K
S
H
Insert Offering
M200 iC 16
16mm iC insert
12 cutting edges
M200 iC 12
12mm iC insert
12 cutting edges
M200 iC 10
10mm iC insert
8 cutting edges
WID_Master16_IndexableMIlling_CopyMills_M018_M019_Metric_REBRAND.indd 19 11/11/15 9:35 AM
M20
LViWID M 16 I d bl MIlli C Mill M020 M021 M i REBRANDO b 14 201510 14AM
widia.com
Copy Mills • M200™ Series
iC10 • Screw-On End Mills
insert
screw Nm
Torx
driver
191.848 2,0 170.025
Spare Parts
Screw-On End Mills
order number catalogue number D1 max D1 D DPM G3X L2 WF Ap1 max Z max RPM
coolant
supply kg
5210273 M200D25Z03M12RN10 25 15 21 12,5 M12 32 17 5,0 3 54700 Yes 0,08
5210274 M200D32Z04M16RN10 32 22 29 17,0 M16 40 24 5,0 4 48300 Yes 0,18
5210275 M200D35Z05M16RN10 35 24 29 17,0 M16 40 24 5,0 5 46200 Yes 0,20
5210276 M200D42Z06M16RN10 42 32 29 17,0 M16 40 24 5,0 6 42200 Yes 0,24
Copy Mills
• Double-sided, eight cutting edges.
• Anti-rotation feature for better stability
and higher feed rates.
• Pocketing and proling capabilities.
WID_Master16_IndexableMIlling_CopyMills_M020_M021_Metric_REBRAND.indd 20 10/29/15 2:15 PM
M21
LViWID M 16 I d bl MIlli C Mill M020 M021 M i REBRANDO b 14201510 14AM
widia.com
Copy Mills • M200™ Series
iC10 • Weldon® Shanks
Spare Parts
Weldon Shanks
order number catalogue number D1 max D1 D L LBX Ap1 max Z max RPM
coolant
supply kg
5210277 M200D25Z03B25RN10 25 15 25 89 40 5,0 3 54700 Yes 0,27
5210278 M200D32Z04B32RN10 32 22 32 101 40 5,0 4 48300 Yes 0,52
• Double-sided, eight cutting edges.
• Anti-rotation feature for better stability
and higher feed rates.
• Pocketing and proling capabilities.
insert
screw Nm
Torx
driver
191.848 2,0 170.025
Copy Mills
WID_Master16_IndexableMIlling_CopyMills_M020_M021_Metric_REBRAND.indd 21 10/29/15 2:15 PM
M22
LViWID M 16 I d bl MIlli C Mill M022 M023 M i REBRANDO b 14 201510 14AM
widia.com
Copy Mills • M200™ Series
iC10 • Cylindrical End Mills
insert
screw Nm
Torx
driver
191.848 2,0 170.025
Spare Parts
Cylindrical End Mills
order number catalogue number D1 max D1 D L LBX L2 Ap1 max Z max RPM
coolant
supply kg
5210279 M200D25Z03A25RN10L150 25 15 25 150 32 32 5,0 3 54700 Yes 0,50
5210300 M200D25Z03A25RN10L200 25 15 25 200 32 32 5,0 3 54700 Yes 0,69
5210301 M200D25Z03A32RN10L250 25 15 32 250 32 32 5,0 3 54700 Yes 1,41
5210302 M200D28Z03A25RN10L200 28 18 25 200 40 40 5,0 3 51600 Yes 0,70
5210303 M200D32Z04A32RN10L150 32 22 32 150 40 40 5,0 4 48300 Yes 0,83
5210304 M200D32Z03A32RN10L200 32 22 32 200 40 40 5,0 3 48300 Yes 1,14
Copy Mills
• Double-sided, eight cutting edges.
• Anti-rotation feature for better stability
and higher feed rates.
• Pocketing and proling capabilities.
WID_Master16_IndexableMIlling_CopyMills_M022_M023_Metric_REBRAND.indd 22 10/29/15 2:15 PM
M23
LViWID M 16 I d bl MIlli C Mill M022 M023 M i REBRANDO b 14201510 14AM
widia.com
Copy Mills • M200™ Series
iC10 • Shell Mills
Spare Parts
Shell Mills
order number catalogue number D1 max D1 D D6 L Ap1 max Z max RPM
coolant
supply kg
5210305 M200D40Z04RN10 40 30 16 38 40 5,0 4 43200 Yes 0,23
5210306 M200D40Z06RN10 40 30 16 38 40 5,0 6 43200 Yes 0,24
5210307 M200D50Z05RN10 50 40 22 42 40 5,0 5 38600 Yes 0,32
5210308 M200D50Z06RN10 50 40 22 42 40 5,0 6 38600 Yes 0,32
5210309 M200D52Z06RN10 52 42 22 49 50 5,0 6 37900 Yes 0,52
• Double-sided, eight cutting edges.
• Anti-rotation feature for better stability
and higher feed rates.
• Pocketing and proling capabilities.
D1 max
insert
screw Nm wrench
socket-head
cap screw
socket-head cap screw
with coolant groove
40 191.848 2,0 170.025 MS1294 MS1294CG
50 191.848 2,0 170.025 MS1234 MS1234CG
52 191.848 2,0 170.025 MS1242 MS1242CG
Copy Mills
NOTE: Socket-head cap screw and socket-head cap screw with coolant groove must be ordered separately.
WID_Master16_IndexableMIlling_CopyMills_M022_M023_Metric_REBRAND.indd 23 10/29/15 2:15 PM
M24
LViWID M 16 I d bl MIlli C Mill M024 M025 M i REBRANDO b 14 201510 15AM
widia.com
Copy Mills • M200™ Series
Inserts
Copy Mills
Insert Selection Guide
Material
Group
Light
Machining
General
Purpose
Heavy
Machining
Geometry Grade Geometry Grade Geometry Grade
P1–P2
ML WP25PM
MM WP40PM
MM WP40PM
P3–P4
ML WP25PM
MM WP25PM
MH WP40PM
P5–P6
ML WP35CM
MM WP35CM
MH WP35CM
M1–M2
ML WP25PM
ML WU35PM
MM WU35PM
M3
ML WP25PM
MM WU35PM
MM WU35PM
K1–K2
MH WK15CM
MH WK15CM
MH WP20CM
K3
MH WK15CM
MH WK15CM
MH WP25PM
N1–N2
––
––
––
N3
––
––
––
S1–S2
ML WS30PM
MM WS30PM
MM WU35PM
S3
ML WS30PM
MM WU35PM
MM WU35PM
S4
ML WS30PM
MM WU35PM
MM WU35PM
H1
MH WP25PM
MH WP20CM
––
RNGJ-ML
catalogue number
number
of indexes D S
WK15CM
WP20CM
WP25PM
WS30PM
WU35PM
WP35CM
WP40PM
RNGJ10T3M0EML 8 10,00 4,76
–
–
5274456
5520352
5274457
5274455
–
• -ML geometry is the rst choice for stainless steel and high-temp alloys.
• -MM geometry is for general purpose, especially for steel.
rst choice
alternate choice
RNGJ-ML
RNGJ-MM
catalogue number
number
of indexes D S
WK15CM
WP20CM
WP25PM
WS30PM
WU35PM
WP35CM
WP40PM
RNGJ10T3M0SMM 8 10,00 4,76
–
–
5274511
5520353
5274512
–
–
RNGJ-MM
iC10 • Inserts • RN.J10…
P
M
K
N
S
H
WID_Master16_IndexableMIlling_CopyMills_M024_M025_Metric_REBRAND.indd 24 10/29/15 2:15 PM
M25
LViWID M 16 I d bl MIlli C Mill M024 M025 M i REBRANDO b 14201510 15AM
widia.com
Copy Mills • M200™ Series
iC10 • Inserts • RN.J10…
RNPJ-MM
catalogue number
number
of indexes D S
WK15CM
WP20CM
WP25PM
WS30PM
WU35PM
WP35CM
WP40PM
RNPJ10T3M0SMM 8 10,00 4,76
–
5276198
5276197
–
–
5276196
5542327
Copy Mills
• -MM geometry is for general purpose, especially for steel.
• -MH geometry is the rst choice for heavy applications,
cast iron, and high-strength steel. rst choice
alternate choice
RNGJ-MM RNPJ-MH
RNPJ-MH
catalogue number
number
of indexes D S
WK15CM
WP20CM
WP25PM
WS30PM
WU35PM
WP35CM
WP40PM
RNPJ10T3M0SMH 8 10,00 4,76
5276243
5276241
5276240
–
5476633
5276199
5542328
P
M
K
N
S
H
WID_Master16_IndexableMIlling_CopyMills_M024_M025_Metric_REBRAND.indd 25 10/29/15 2:15 PM
M26
LViWID M 16 I d bl MIlli C Mill M026 M027 M i REBRANDO b 14 201510 15AM
widia.com
Copy Mills • M200™ Series
Recommended Starting Speeds
NOTE: FIRST choice starting speeds are in bold type.
As the average chip thickness increases, the speed should be decreased.
Copy Mills
Recommended Starting Speeds [m/min]
Material
Group WU35PM WP35CM WP40PM
P
1
310
275
260 545
475
445 355
310
295
2
265
230
190 335
305
275 300
260
215
3
240
205
170 305
275
245 275
235
190
4
215
180
145 230
210
190 245
205
160
5
180
160
145 310
275
250 205
185
160
6
155
120
95 190
160
130 180
140
110
M
1
205
180
160 245
220
185 235
205
185
2
185
155
130 220
190
170 210
180
150
3
140
120
95 175
155
140 155
140
110
K
1
–
–
– 355
320
290 –
–
–
2
–
–
– 280
250
230 –
–
–
3
–
–
– 235
210
190 –
–
–
N
1
–
–
––
–
––
–
–
2
–
–
––
–
––
–
–
3
–
–
––
–
––
–
–
S
1
40
35
30 –
–
–50
40
35
2
40
35
30 –
–
–50
40
35
3
55
40
30 –
–
–60
50
35
4
70
55
35 80
60
40 80
60
40
H
1
–
–
––
–
––
–
–
2
–
–
––
–
––
–
–
3
–
–
––
–
––
–
–
Material
Group WK15CM WP20CM WP25PM WS30PM
P
1
–
–
– 660
580
540 395
340
325 –
–
–
2
–
–
– 410
370
330 330
290
240 –
–
–
3
–
–
– 370
330
305 305
260
210 –
–
–
4
–
–
– 275
260
230 270
220
180 –
–
–
5
–
–
– 330
300
275 220
205
180 –
–
–
6
–
–
– 230
205
175 200
150
120 –
–
–
M
1
–
–
– 270
240
210 245
215
200 270
240
220
2
–
–
– 245
210
190 220
190
155 245
215
175
3
–
–
– 190
175
150 170
145
115 185
160
125
K
1
505
460
410 430
390
355 275
245
220 –
–
–
2
400
355
330 340
305
280 215
190
180 –
–
–
3
335
300
275 290
260
240 180
160
145 –
–
–
N
1
–
–
––
–
––
–
––
–
–
2
–
–
––
–
––
–
––
–
–
3
–
–
––
–
––
–
––
–
–
S
1
–
–
––
–
–50
40
30 55
50
35
2
–
–
––
–
–50
40
30 55
50
35
3
–
–
––
–
–60
50
30 65
55
35
4
–
–
––
–
–85
60
40 100
70
50
H
1
–
–
– 170
140
115 145
110
85 –
–
–
2
–
–
––
–
––
–
––
–
–
3
–
–
––
–
––
–
––
–
–
WID_Master16_IndexableMIlling_CopyMills_M026_M027_Metric_REBRAND.indd 26 10/29/15 2:15 PM
M27
LViWID M 16 I d bl MIlli C Mill M026 M027 M i REBRANDO b 14201510 15AM
widia.com
Copy Mills • M200™ Series
Recommended Starting Feeds
NOTE: Use “Light Machining” value as starting feed rate.
Copy Mills
Recommended Starting Feeds [mm]
At 5,00 Axial Depth of Cut (ap)
At 2,50 Axial Depth of Cut (ap)
At 1,25 Axial Depth of Cut (ap)
Light
Machining
General
Purpose
Heavy
Machining
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
ML 0,20
0,67
1,21 0,14
0,48
0,87 0,11
0,36
0,65 0,09
0,31
0,56 0,09
0,29
0,52 ML
MM 0,43
0,77
1,39 0,31
0,55
1,00 0,23
0,41
0,74 0,20
0,36
0,65 0,18
0,33
0,59 MM
MH 0,70
0,88
1,46 0,51
0,63
1,04 0,38
0,47
0,78 0,33
0,41
0,68 0,30
0,38
0,62 MH
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
ML 0,27
0,92
1,67 0,20
0,66
1,19 0,15
0,49
0,89 0,13
0,43
0,77 0,12
0,39
0,71 ML
MM 0,58
1,05
1,92 0,42
0,75
1,37 0,31
0,56
1,02 0,27
0,49
0,88 0,25
0,45
0,81 MM
MH 0,96
1,21
2,02 0,69
0,87
1,43 0,52
0,65
1,06 0,45
0,56
0,93 0,41
0,52
0,85 MH
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
ML 0,15
0,51
0,92 0,11
0,37
0,66 0,08
0,27
0,49 0,07
0,24
0,43 0,07
0,22
0,39 ML
MM 0,32
0,58
1,06 0,23
0,42
0,76 0,18
0,31
0,57 0,15
0,27
0,49 0,14
0,25
0,45 MM
MH 0,54
0,67
1,11 0,39
0,48
0,80 0,29
0,36
0,59 0,25
0,32
0,52 0,23
0,29
0,47 MH
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
ML 0,13
0,44
0,80 0,10
0,32
0,57 0,07
0,24
0,43 0,06
0,21
0,37 0,06
0,19
0,34 ML
MM 0,28
0,50
0,91 0,20
0,36
0,66 0,15
0,27
0,49 0,13
0,24
0,43 0,12
0,22
0,39 MM
MH 0,46
0,58
0,96 0,33
0,42
0,69 0,25
0,31
0,51 0,22
0,27
0,45 0,20
0,25
0,41 MH
At 0,63 Axial Depth of Cut (ap)
WID_Master16_IndexableMIlling_CopyMills_M026_M027_Metric_REBRAND.indd 27 10/29/15 2:15 PM
M28
LViWID M 16 I d bl MIlli C Mill M028 M029 M i REBRANDO b 14 201510 15AM
widia.com
Copy Mills • M200™ Series
iC12 • Screw-On End Mills
D1 max
insert
screw Nm
Torx
driver
32 193.492 4,0 170.025
35 193.492 4,0 170.025
42 193.492 4,0 170.025
Spare Parts
Screw-On End Mills
order number catalogue number D1 max D1 D DPM G3X L2 WF Ap1 max Z max RPM
coolant
supply kg
4147560 M200D32Z03M16RN12 32 20 29 17,0 M16 40 24 3,0 3 39160 Yes 0,18
4147561 M200D35Z03M16RN12 35 23 29 17,0 M16 40 24 3,0 3 37440 Yes 0,19
4147562 M200D42Z04M16RN12 42 30 29 17,0 M16 40 24 3,0 4 34180 Yes 0,24
Copy Mills
• Double-sided, 12 cutting edges.
• Anti-rotation feature for better stability
and higher feed rates.
• Pocketing and proling capabilities.
WID_Master16_IndexableMIlling_CopyMills_M028_M029_Metric_REBRAND.indd 28 10/29/15 2:15 PM
M29
LViWID M 16 I d bl MIlli C Mill M028 M029 M i REBRANDO b 14201510 15AM
widia.com
Copy Mills • M200™ Series
iC12 • Weldon® Shanks
Spare Parts
Weldon Shanks
order number catalogue number D1 max D1 D L LBX Ap1 max Z max RPM
coolant
supply kg
4147564 M200D32Z03B32RN12 32 20 32 125 40 3,0 3 39160 Yes 0,65
• Double-sided, 12 cutting edges.
• Anti-rotation feature for better stability
and higher feed rates.
• Pocketing and proling capabilities.
D1 max
insert
screw Nm
Torx
driver
32 193.492 4,0 170.025
Copy Mills
WID_Master16_IndexableMIlling_CopyMills_M028_M029_Metric_REBRAND.indd 29 10/29/15 2:15 PM
M30
LViWID M 16 I d bl MIlli C Mill M030 M031 M i REBRANDO b 14 201510 15AM
widia.com
Copy Mills • M200™ Series
iC12 • Cylindrical End Mills
D1 max
insert
screw Nm
Torx
driver
32 193.492 4,0 170.025
Spare Parts
Cylindrical End Mills
order number catalogue number D1 max D1 D L LBX Ap1 max Z max RPM
coolant
supply kg
4147566 M200D32Z03A32RN12L200 32 20 32 200 40 3,0 3 39160 Yes 1,10
4147567 M200D32Z02A32RN12L250 32 20 32 250 40 3,0 2 39160 Yes 1,41
Copy Mills
• Double-sided, 12 cutting edges.
• Anti-rotation feature for better stability
and higher feed rates.
• Pocketing and proling capabilities.
WID_Master16_IndexableMIlling_CopyMills_M030_M031_Metric_REBRAND.indd 30 10/29/15 2:15 PM
M31
LViWID M 16 I d bl MIlli C Mill M030 M031 M i REBRANDO b 14201510 15AM
widia.com
Copy Mills • M200™ Series
iC12 • Shell Mills
Spare Parts
Shell Mills
order number catalogue number D1 max D1 D D6 L Ap1 max Z max RPM
coolant
supply kg
4147568 M200D40Z04RN12 40 28 16 38 40 3,0 4 35020 Yes 0,22
4147569 M200D50Z04RN12 50 38 22 42 40 3,0 4 31330 Yes 0,30
4147570 M200D50Z05RN12 50 38 22 42 40 3,0 5 31330 Yes 0,29
4147571 M200D52Z05RN12 52 40 22 49 50 3,0 5 30720 Yes 0,49
4147572 M200D63Z05RN12 63 51 22 49 50 3,0 5 27910 Yes 0,63
4147573 M200D63Z07RN12 63 51 22 49 50 3,0 7 27910 Yes 0,63
4147574 M200D66Z07RN12 66 54 27 60 50 3,0 7 27260 Yes 0,82
4147575 M200D80Z06RN12 80 68 27 60 50 3,0 6 24760 Yes 1,02
4147576 M200D80Z08RN12 80 68 27 60 50 3,0 8 24760 Yes 1,02
4147577 M200D100Z07RN12 100 88 32 78 50 3,0 7 22150 Yes 1,45
4147578 M200D100Z09RN12 100 88 32 78 50 3,0 9 22150 Yes 1,41
• Double-sided, 12 cutting edges.
• Anti-rotation feature for better stability
and higher feed rates.
• Pocketing and proling capabilities.
D1 max
insert
screw Nm wrench
low-head
cap screw
socket-head
cap screw
socket-head cap screw
with coolant groove
coolant
lock screw
coolant lock
screw assembly
40 193.492 4,0 170.025 — MS1294 MS1294CG — —
50 193.492 4,0 170.025 MS1336 — MS2072CG — —
52 193.492 4,0 170.025 — MS1242 MS1242CG — —
63 193.492 4,0 170.025 — MS1242 MS1242CG — —
66 193.492 4,0 170.025 — MS2038 MS2038CG — —
80 193.492 4,0 170.025 — MS2038 MS2038CG — —
100 193.492 4,0 170.025 — — — KLS32M MS2195C
Copy Mills
NOTE: Socket-head cap screw with coolant groove and coolant lock screw assembly must be ordered separately.
WID_Master16_IndexableMIlling_CopyMills_M030_M031_Metric_REBRAND.indd 31 10/29/15 2:15 PM
M32
LViWID M 16 I d bl MIlli C Mill M032 M033 M i REBRANDO b 14 201510 16AM
widia.com
Copy Mills • M200™ Series
Inserts
Copy Mills
Insert Selection Guide
Material
Group
Light
Machining
General
Purpose
Heavy
Machining
Geometry Grade Geometry Grade Geometry Grade
P1–P2
ML WP25PM
MM WP40PM
MM WP40PM
P3–P4
ML WP25PM
MM WP25PM
MH WP40PM
P5–P6
ML WP35CM
MM WP35CM
MH WP35CM
M1–M2
ML WP25PM
ML WU35PM
MM WU35PM
M3
ML WP25PM
MM WU35PM
MM WU35PM
K1–K2
MH WK15CM
MH WK15CM
MH WP20CM
K3
MH WK15PM
MH WK15PM
MH WP25PM
N1–N2
––
––
––
N3
––
––
––
S1–S2
ML WS30PM
MM WS30PM
MM WU35PM
S3
ML WS30PM
MM WU35PM
MM WU35PM
S4
ML WS30PM
MM WU35PM
MM WU35PM
H1
MH WP25PM
MH WP20CM
––
RNGJ-ML
catalogue number
cutting
edges D S
WK15PM
WK15CM
WP20CM
WP25PM
WS30PM
WU35PM
WP35CM
WP40PM
RNGJ1204M0EML 12 12,00 4,75
–
–
–
5123863
5520350
5123864
5123865
–
• -ML geometry is the rst choice for stainless steel and high-temp alloys.
• -MM geometry is for general purpose, especially for steel.
rst choice
alternate choice
RNGJ-ML
RNGJ-MM
catalogue number
cutting
edges D S
WK15PM
WK15CM
WP20CM
WP25PM
WS30PM
WU35PM
WP35CM
WP40PM
RNGJ1204M0SMM 12 12,00 4,75
5123866
–
–
5123867
5520351
5123868
5123869
–
RNGJ-MM
iC12 • Inserts • RN.J12..
P
M
K
N
S
H
WID_Master16_IndexableMIlling_CopyMills_M032_M033_Metric_REBRAND.indd 32 10/29/15 2:15 PM
M33
LViWID M 16 I d bl MIlli C Mill M032 M033 M i REBRANDO b 14201510 16AM
widia.com
Copy Mills
RNPJ-MM
RNPJ-MM
catalogue number
cutting
edges D S
WK15PM
WK15CM
WP20CM
WP25PM
WS30PM
WU35PM
WP35CM
WP40PM
RNPJ1204M0SMM 12 12,00 4,75
–
–
5276362
5276361
–
5476634
5276360
5542329
RNPJ-MH
RNPJ-MH
catalogue number
cutting
edges D S
WK15PM
WK15CM
WP20CM
WP25PM
WS30PM
WU35PM
WP35CM
WP40PM
RNPJ1204M0SMH 12 12,00 4,75
–
5276366
5276365
5276364
–
5476635
5276363
5542340
M200™ Series • Copy Mills
P
M
K
N
S
H
iC12 • Inserts • RN.J12..
RNGJ-MH
catalogue number
cutting
edges D S
WK15PM
WK15CM
WP20CM
WP25PM
WS30PM
WU35PM
WP35CM
WP40PM
RNGJ1204M0SMH 12 12,00 4,75
5123900
–
–
5123901
–
5123902
5123903
–
RNGJ-MH
• -MM geometry is for general purpose, especially for steel.
• -MH geometry is the rst choice for heavy applications,
cast iron, and high-strength steel. rst choice
alternate choice
WID_Master16_IndexableMIlling_CopyMills_M032_M033_Metric_REBRAND.indd 33 10/29/15 2:15 PM
M34
LViWID M 16 I d bl MIlli C Mill M034 M035 M i REBRANDO b 14 201510 16AM
widia.com
Copy Mills • M200™ Series
Recommended Starting Speeds
NOTE: FIRST choice starting speeds are in bold type.
As the average chip thickness increases, the speed should be decreased.
Copy Mills
Recommended Starting Speeds [m/min]
Material
Group WS30PM WU35PM WP35CM WP40PM
P
1
–
–
– 310
275
260 545
475
445 355
310
295
2
–
–
– 265
230
190 335
305
275 300
260
215
3
–
–
– 240
205
170 305
275
245 275
235
190
4
–
–
– 215
180
145 230
210
190 245
205
160
5
–
–
– 180
160
145 310
275
250 205
185
160
6
–
–
– 155
120
95 190
160
130 180
140
110
M
1
270
240
220 205
180
160 245
220
185 235
205
185
2
245
215
175 185
155
130 220
190
170 210
180
150
3
185
160
125 140
120
95 175
155
140 155
140
110
K
1
–
–
––
–
– 355
320
290 –
–
–
2
–
–
––
–
– 280
250
230 –
–
–
3
–
–
––
–
– 235
210
190 –
–
–
N
1
–
–
––
–
––
–
––
–
–
2
–
–
––
–
––
–
––
–
–
3
–
–
––
–
––
–
––
–
–
S
1
55
50
35 40
35
30 –
–
–50
40
35
2
55
50
35 40
35
30 –
–
–50
40
35
3
65
55
35 55
40
30 –
–
–60
50
35
4
100
70
50 70
55
35 80
60
40 80
60
40
H
1
–
–
––
–
––
–
––
–
–
2
–
–
––
–
––
–
––
–
–
3
–
–
––
–
––
–
––
–
–
Material
Group WK15PM WK15CM WP20CM WP25PM
P
1
–
–
––
–
– 660
580
540 395
340
325
2
–
–
––
–
– 410
370
330 330
290
240
3
–
–
––
–
– 370
330
305 305
260
210
4
–
–
––
–
– 275
260
230 270
220
180
5
–
–
––
–
– 330
300
275 220
205
180
6
–
–
––
–
– 230
205
175 200
150
120
M
1
–
–
––
–
– 270
240
210 245
215
200
2
–
–
––
–
– 245
210
190 220
190
155
3
–
–
––
–
– 190
175
150 170
145
115
K
1
325
295
260 505
460
410 430
390
355 275
245
220
2
250
230
210 400
355
330 340
305
280 215
190
180
3
210
190
175 335
300
275 290
260
240 180
160
145
N
1
–
–
––
–
––
–
––
–
–
2
–
–
––
–
––
–
––
–
–
3
–
–
––
–
––
–
––
–
–
S
1
–
–
––
–
––
–
–50
40
30
2
–
–
––
–
––
–
–50
40
30
3
–
–
––
–
––
–
–60
50
30
4
–
–
––
–
––
–
–85
60
40
H
1
–
–
––
–
– 170
140
115 145
110
85
2
–
–
––
–
––
–
––
–
–
3
–
–
––
–
––
–
––
–
–
WID_Master16_IndexableMIlling_CopyMills_M034_M035_Metric_REBRAND.indd 34 10/29/15 2:15 PM
M35
LViWID M 16 I d bl MIlli C Mill M034 M035 M i REBRANDO b 14201510 16AM
widia.com
Copy Mills • M200™ Series
Recommended Starting Feeds
NOTE: Use “Light Machining” value as starting feed rate.
Copy Mills
Recommended Starting Feeds [mm]
At 6,00 Axial Depth of Cut (ap)
At 3,00 Axial Depth of Cut (ap)
At 1,50 Axial Depth of Cut (ap)
Light
Machining
General
Purpose
Heavy
Machining
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
ML 0,18
0,27
0,49 0,13
0,19
0,35 0,10
0,15
0,26 0,09
0,13
0,23 0,08
0,12
0,21 ML
MM 0,43
0,77
1,28 0,31
0,56
0,92 0,23
0,42
0,68 0,20
0,36
0,60 0,19
0,33
0,55 MM
MH 0,70
1,06
1,56 0,51
0,76
1,12 0,38
0,57
0,83 0,33
0,50
0,72 0,30
0,45
0,66 MH
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
ML 0,25
0,37
0,67 0,18
0,27
0,48 0,14
0,20
0,36 0,12
0,17
0,32 0,11
0,16
0,29 ML
MM 0,59
1,06
1,77 0,43
0,76
1,26 0,32
0,57
0,94 0,28
0,50
0,81 0,25
0,45
0,75 MM
MH 0,96
1,46
2,16 0,69
1,04
1,53 0,52
0,78
1,14 0,45
0,68
0,99 0,41
0,62
0,90 MH
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
ML 0,14
0,20
0,37 0,10
0,15
0,27 0,08
0,11
0,20 0,07
0,10
0,18 0,06
0,09
0,16 ML
MM 0,33
0,59
0,97 0,24
0,43
0,70 0,18
0,32
0,52 0,16
0,28
0,45 0,14
0,25
0,42 MM
MH 0,54
0,81
1,18 0,39
0,58
0,85 0,29
0,43
0,63 0,25
0,38
0,55 0,23
0,35
0,51 MH
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
ML 0,12
0,18
0,32 0,09
0,13
0,23 0,07
0,10
0,18 0,06
0,08
0,15 0,05
0,08
0,14 ML
MM 0,28
0,51
0,84 0,21
0,37
0,61 0,15
0,28
0,45 0,13
0,24
0,39 0,12
0,22
0,36 MM
MH 0,46
0,70
1,02 0,33
0,50
0,73 0,25
0,38
0,55 0,22
0,33
0,48 0,20
0,30
0,44 MH
At 0,75 Axial Depth of Cut (ap)
WID_Master16_IndexableMIlling_CopyMills_M034_M035_Metric_REBRAND.indd 35 10/29/15 2:15 PM
M36
LViWID M 16 I d bl MIlli C Mill M036 M037 M i REBRANDO b 14 201510 16AM
widia.com
Copy Mills • M200™ Series
iC16 • Shell Mills
D1 max
insert
screw Nm wrench
socket-head
cap screw
socket-head cap screw
with coolant groove
coolant
lock screw
coolant lock
screw assembly
50 192.932 4,0 170.026 MS1242 MS1242CG — —
52 MS2260 4,0 170.026 MS1242 MS1242CG — —
63 MS2260 4,0 170.026 MS1242 MS1242CG — —
63 193.343 4,0 170.026 MS1242 MS1242CG — —
66 MS2260 4,0 170.026 MS2038 MS2038CG — —
80 MS2260 4,0 170.026 MS2038 MS2038CG — —
100 MS2260 4,0 170.026 — — KLS32M MS2195C
125 MS2260 4,0 170.026 — — KLS40M MS2187C
Spare Parts
Shell Mills
order number catalogue number D1 max D1 D D6 L Ap1 max Z max RPM
coolant
supply kg
5209989 M200D50Z04RN16 50 34 22 42 50 4,0 4 26700 Yes 0,36
5210210 M200D52Z04RN16 52 36 22 42 50 4,0 4 26000 Yes 0,39
5210212 M200D63Z06RN16 63 47 22 49 50 4,0 6 22700 Yes 0,56
5210211 M200D63Z04RN16 63 47 22 49 50 4,0 4 22700 Yes 0,58
5210213 M200D66Z05RN16 66 50 27 60 50 4,0 5 22000 Yes 0,69
5210214 M200D80Z05RN16 80 64 27 60 50 4,0 5 19500 Yes 0,88
5210215 M200D80Z07RN16 80 64 27 60 50 4,0 7 19500 Yes 0,89
5210216 M200D100Z06RN16 100 84 32 78 50 4,0 6 17000 Yes 1,36
5210217 M200D100Z08RN16 100 84 32 78 50 4,0 8 17000 Yes 1,37
5210218 M200D125Z08RN16 125 109 40 90 63 4,0 8 14900 Yes 2,50
Copy Mills
• Double-sided, 12 cutting edges.
• Anti-rotation feature for better stability
and higher feed rates.
• Pocketing and proling capabilities.
NOTE: Socket-head cap screw with coolant groove and coolant lock screw assembly must be ordered separately.
WID_Master16_IndexableMIlling_CopyMills_M036_M037_Metric_REBRAND.indd 36 10/29/15 2:15 PM
M37
LViWID M 16 I d bl MIlli C Mill M036 M037 M i REBRANDO b 14201510 16AM
widia.com
Copy Mills • M200™ Series
Inserts
Copy Mills
Insert Selection Guide
Material
Group
Light
Machining
General
Purpose
Heavy
Machining
Geometry Grade Geometry Grade Geometry Grade
P1–P2
ML WP25PM
MM WP40PM
MM WP40PM
P3–P4
ML WP25PM
MM WP25PM
MH WP40PM
P5–P6
ML WP35CM
MM WP35CM
MH WP35CM
M1–M2
ML WP25PM
ML WU35PM
MM WU35PM
M3
ML WP25PM
MM WU35PM
MM WU35PM
K1–K2
MH WK15CM
MH WK15CM
MH WP20CM
K3
MH WK15CM
MH WP20CM
MH WP35CM
N1–N2
––
––
––
N3
––
––
––
S1–S2
ML WS30PM
ML WS30PM
ML WU35PM
S3
ML WS30PM
ML WU35PM
ML WU35PM
S4
ML WS30PM
ML WU35PM
ML WU35PM
H1
MH WP25PM
MH WP20CM
––
P
M
K
N
S
H
• -ML geometry is the rst choice for stainless steel and high-temp alloys.
rst choice
alternate choice
RNGJ-ML
RNGJ-ML
catalogue number
cutting
edges D S
WK15CM
WP20CM
WP25PM
WS30PM
WU35PM
WP35CM
WP40PM
RNGJ1605M0EML 12 16,00 6,35
–
–
5274561
5520354
5274562
5274560
–
iC16 • Inserts • RN.J16…
WID_Master16_IndexableMIlling_CopyMills_M036_M037_Metric_REBRAND.indd 37 10/29/15 2:15 PM
M38
LViWID M 16 I d bl MIlli C Mill M038 M039 M i REBRANDO b 14 201510 16AM
widia.com
Copy Mills • M200™ Series
iC16 • Inserts • RN.J16…
RNPJ-MM
catalogue number
cutting
edges D S
WK15CM
WP20CM
WP25PM
WS30PM
WU35PM
WP35CM
WP40PM
RNPJ1605M0SMM 12 16,00 6,35
–
5276472
5276471
–
5476637
5276470
5542341
Copy Mills
• -MM geometry is for general purpose, especially for steel.
• -MH geometry is the rst choice for heavy applications,
cast iron, and high-strength steels.
rst choice
alternate choice
RNPJ-MM
RNPJ-MH
catalogue number
cutting
edges D S
WK15CM
WP20CM
WP25PM
WS30PM
WU35PM
WP35CM
WP40PM
RNPJ1605M0SMH 12 16,00 6,35
5276476
5276475
5276474
–
5476636
5276473
5542342
RNPJ-MH
Recommended Starting Speeds
Recommended Starting Speeds [m/min]
Material
Group WK15CM WP20CM WP25PM WS30PM
P
1
–
–
– 660
580
540 395
340
325 –
–
–
2
–
–
– 410
370
330 330
290
240 –
–
–
3
–
–
– 370
330
305 305
260
210 –
–
–
4
–
–
– 275
260
230 270
220
180 –
–
–
5
–
–
– 330
300
275 220
205
180 –
–
–
6
–
–
– 230
205
175 200
150
120 –
–
–
M
1
–
–
– 270
240
210 245
215
200 270
240
220
2
–
–
– 245
210
190 220
190
155 245
215
175
3
–
–
– 190
175
150 170
145
115 185
160
125
K
1
505
460
410 430
390
355 275
245
220 –
–
–
2
400
355
330 340
305
280 215
190
180 –
–
–
3
335
300
275 290
260
240 180
160
145 –
–
–
N
1
–
–
––
–
––
–
––
–
–
2
–
–
––
–
––
–
––
–
–
3
–
–
––
–
––
–
––
–
–
S
1
–
–
––
–
–50
40
30 55
50
35
2
–
–
––
–
–50
40
30 55
50
35
3
–
–
––
–
–60
50
30 65
55
35
4
–
–
––
–
–85
60
40 100
70
50
H
1
–
–
– 170
140
115 145
110
85 –
–
–
2
–
–
––
–
––
–
––
–
–
3
–
–
––
–
––
–
––
–
–
P
M
K
N
S
H
WID_Master16_IndexableMIlling_CopyMills_M038_M039_Metric_REBRAND.indd 38 10/29/15 2:15 PM
M39
LViWID M 16 I d bl MIlli C Mill M038 M039 M i REBRANDO b 14201510 16AM
widia.com
Copy Mills • M200™ Series
Recommended Starting Speeds
NOTE: FIRST choice starting speeds are in bold type.
As the average chip thickness increases, the speed should be decreased.
Material
Group WU35PM WP35CM WP40PM
P
1
310
275
260 545
475
445 355
310
295
2
265
230
190 335
305
275 300
260
215
3
240
205
170 305
275
245 275
235
190
4
215
180
145 230
210
190 245
205
160
5
180
160
145 310
275
250 205
185
160
6
155
120
95 190
160
130 180
140
110
M
1
205
180
160 245
220
185 235
205
185
2
185
155
130 220
190
170 210
180
150
3
140
120
95 175
155
140 155
140
110
K
1
–
–
– 355
320
290 –
–
–
2
–
–
– 280
250
230 –
–
–
3
–
–
– 235
210
190 –
–
–
N
1
–
–
––
–
––
–
–
2
–
–
––
–
––
–
–
3
–
–
––
–
––
–
–
S
1
40
35
30 –
–
–50
40
35
2
40
35
30 –
–
–50
40
35
3
55
40
30 –
–
–60
50
35
4
70
55
35 80
60
40 80
60
40
H
1
–
–
––
–
––
–
–
2
–
–
––
–
––
–
–
3
–
–
––
–
––
–
–
Copy Mills
(Recommended Starting Speeds [m/min] — continued)
NOTE: Use “Light Machining” value as starting feed rate.
Recommended Starting Feeds [mm]
At 8,00 Axial Depth of Cut (ap)
At 4,00 Axial Depth of Cut (ap)
At 2,00 Axial Depth of Cut (ap)
Light
Machining
General
Purpose
Heavy
Machining
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
ML 0,19
0,56
0,73 0,14
0,40
0,53 0,10
0,30
0,40 0,09
0,26
0,34 0,08
0,24
0,32 ML
MM 0,43
1,06
1,24 0,31
0,76
0,89 0,23
0,57
0,66 0,20
0,50
0,57 0,19
0,45
0,53 MM
MH 0,81
1,06
1,79 0,58
0,76
1,28 0,44
0,57
0,95 0,38
0,50
0,83 0,35
0,45
0,76 MH
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
ML 0,26
0,77
1,01 0,19
0,55
0,73 0,14
0,41
0,54 0,12
0,36
0,47 0,11
0,33
0,43 ML
MM 0,59
1,46
1,70 0,43
1,04
1,21 0,32
0,78
0,90 0,28
0,68
0,79 0,25
0,62
0,72 MM
MH 1,11
1,46
2,48 0,80
1,04
1,75 0,60
0,78
1,30 0,52
0,68
1,13 0,48
0,62
1,03 MH
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
ML 0,14
0,43
0,56 0,10
0,31
0,40 0,08
0,23
0,30 0,07
0,20
0,26 0,06
0,18
0,24 ML
MM 0,33
0,81
0,94 0,24
0,58
0,67 0,18
0,43
0,50 0,16
0,38
0,44 0,14
0,35
0,40 MM
MH 0,62
0,81
1,36 0,44
0,58
0,97 0,33
0,43
0,72 0,29
0,38
0,63 0,27
0,35
0,58 MH
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
ML 0,12
0,37
0,48 0,09
0,27
0,35 0,07
0,20
0,26 0,06
0,17
0,23 0,05
0,16
0,21 ML
MM 0,28
0,70
0,81 0,21
0,50
0,58 0,15
0,38
0,44 0,13
0,33
0,38 0,12
0,30
0,35 MM
MH 0,53
0,70
1,17 0,38
0,50
0,84 0,29
0,38
0,63 0,25
0,33
0,55 0,23
0,30
0,50 MH
At 1,00 Axial Depth of Cut (ap)
Recommended Starting Feeds
WID_Master16_IndexableMIlling_CopyMills_M038_M039_Metric_REBRAND.indd 39 10/29/15 2:15 PM
M40
LViWID M 16 I d bl MIlli C Mill M040 M041 M i REBRANDN b 11 20158 42AM
widia.com
Hard nickel-coated bodies.
Additional insert clamping
(select tool bodies).
High tooth density for
optimised HSM. Through tool coolant.
Superior ramping and
helical interpolation
capabilities.
• Nickel-coated cutter bodies ensure improved tool life and chip fl ow.
• Screw-on end mills and shell mills.
• High tooth density for optimised HSM.
• High-accuracy PSTS inserts are ideal for die and mould manufacturing.
M170
Specially engineered with industry standard insert sizes, the M170 Series offers the highest
performance rates for best-in-class cost effi ciency, high-strength steel, and hard machining
capability, and a strong, solid cutter body designed for maximum performance.
Ideal for Die and Mould Applications •
M170™ Series
WID_Master16_IndexableMIlling_CopyMills_M040_M041_Metric_REBRAND.indd 40 11/11/15 9:35 AM
M41
LViWID M 16 I d bl MIlli C Mill M040 M041 M i REBRANDN b 1120158 42AM
widia.com
Copy Mills M170™
Max depth of cut: 8mm
Diameter: 12–125mm
Pages: M42–M70
P
M
K
S
H
Insert Offering
iC07 iC10 iC12 iC16
7mm iC insert RD.X
Up to 3,5mm Ap max.
Diameter range
12–35mm
10mm iC insert RDPX
Up to 5mm Ap max.
Diameter range
20–52mm
12mm iC insert RDPX
Up to 6mm Ap max.
Diameter range
24–100mm
16mm iC insert RDPX
Up to 8mm Ap max.
Diameter range
32–125mm
WID_Master16_IndexableMIlling_CopyMills_M040_M041_Metric_REBRAND.indd 41 11/11/15 9:35 AM
M42
LViWID M 16 I d bl MIlli C Mill M042 M043 M i REBRANDO b 14 201510 17AM
widia.com
Copy Mills • M170™ Series
Screw-On End Mills • RD07T1..
D1 max
insert
screw Nm
Torx
driver
12 193.364 1,0 12147549000
15 193.364 1,0 12147549000
Spare Parts
Screw-On End Mills
order number catalogue number D1 max D1 D DPM G3X L2 WF Ap1 max Z
max
ramp
angle max RPM
coolant
supply kg
3935336 M170D012Z02M06RD07T 12 5 10 6,5 M6 18 7 3,5 2 22.0° 26200 Yes 0,02
3935337 M170D012Z02M08RD07T 12 5 13 8,5 M8 23 10 3,5 2 22.0° 26200 Yes 0,02
3935338 M170D015Z03M08RD07T 15 8 13 8,5 M8 18 10 3,5 3 11.0° 21200 Yes 0,02
Copy Mills
• Longer cutter tool life.
• Premium nickel-coated bodies.
• Designed for maximum performance.
• Ideally suited for die and mould manufacturing.
NOTE: All spare parts except the insert screws must be ordered separately.
WID_Master16_IndexableMIlling_CopyMills_M042_M043_Metric_REBRAND.indd 42 10/29/15 2:16 PM
M43
LViWID M 16 I d bl MIlli C Mill M042 M043 M i REBRANDO b 14201510 17AM
widia.com
Copy Mills • M170™ Series
Cylindrical Shanks • RD07T1..
Spare Parts
Cylindrical Shanks
order number catalogue number D1 max D1 D L L2 BHTCA Ap1 max Z
max
ramp
angle max RPM
coolant
supply kg
3935339 M170D012Z02A12RD07TL100 12 5 12 100 20 — 3,5 2 22.0° 26200 Yes 0,07
3935340 M170D012Z02A16RD07TL120 12 5 16 120 60 2.0° 3,5 2 22.0° 26200 Yes 0,14
3935341 M170D012Z02A16RD07TL140 12 5 16 140 80 1.5° 3,5 2 22.0° 26200 Yes 0,16
3935342 M170D015Z03A16RD07TL130 15 8 16 130 60 0.5° 3,5 3 11.0° 21200 Yes 0,13
• Longer cutter tool life.
• Premium nickel-coated bodies.
• Designed for maximum performance.
• Ideally suited for die and mould manufacturing.
D1 max
insert
screw Nm
Torx
driver
12 193.364 1,0 12147549000
15 193.364 1,0 12147549000
Copy Mills
NOTE: All spare parts except the insert screws must be ordered separately.
WID_Master16_IndexableMIlling_CopyMills_M042_M043_Metric_REBRAND.indd 43 10/29/15 2:16 PM
M44
LViWID M 16 I d bl MIlli C Mill M044 M045 M i REBRANDO b 14 201510 17AM
widia.com
Copy Mills • M170™ Series
Inserts
Copy Mills
Insert Selection Guide
Material
Group
Light
Machining
General
Purpose
Heavy
Machining
Geometry Grade Geometry Grade Geometry Grade
P1–P2
––
––
––
P3–P4
MH TN2505
MH TN6525
MH TN6540
P5–P6
MH TN2505
MH TN6525
MH TN6540
M1–M2
––
––
––
M3
––
––
––
K1–K2
MH TN2505
MH TN2505
MH TN6525
K3
MH TN2505
MH TN2505
MH TN6525
N1–N2
––
––
––
N3
––
––
––
S1–S2
––
––
––
S3
––
––
––
S4
––
––
––
H1
MH TN2505
MH TN2505
––
P
M
K
N
S
H
RDHX-MH
catalogue number D S hm
TN2505
TN6525
TN6540
RDHX07T1M0SNMH 7,00 1,98 0,08
3960578
3960573
3960532
• -MH geometry is suitable for high-strength steels,
cast iron, and hard machining.
rst choice
alternate choice
iC07 • Inserts
RDHX-MH
WID_Master16_IndexableMIlling_CopyMills_M044_M045_Metric_REBRAND.indd 44 10/29/15 2:16 PM
M45
LViWID M 16 I d bl MIlli C Mill M044 M045 M i REBRANDO b 14201510 17AM
widia.com
Copy Mills • M170™ Series
Recommended Starting Speeds
NOTE: FIRST choice starting speeds are in bold type.
As the average chip thickness increases, the speed should be decreased.
Copy Mills
Recommended Starting Speeds [m/min]
Material
Group TN2505 TN6525 TN6540
P
1
550
420
360 410
320
280 360
280
240
2
320
240
205 320
250
215 250
190
170
3
320
240
205 280
215
185 215
170
140
4
–
–
– 235
170
145 180
130
110
5
–
–
– 310
235
200 240
180
150
6
–
–
– 205
160
130 160
120
100
M
1
–
–
– 190
120
80 130
80
60
2
–
–
– 120
80
50 80
50
40
3
–
–
– 125
80
55 85
50
40
K
1
400
300
250 275
245
220 220
205
180
2
540
365
280 215
190
180 175
155
140
3
310
190
155 180
160
145 155
145
125
N
1
–
–
––
–
––
–
–
2
–
–
––
–
––
–
–
3
–
–
––
–
––
–
–
S
1
–
–
––
–
–50
35
30
2
–
–
––
–
–25
20
10
3
–
–
––
–
–70
40
30
4
–
–
––
–
–60
30
25
H
1
175
140
95 –
–
––
–
–
2
175
140
95 –
–
––
–
–
3
140
115
80 –
–
––
–
–
NOTE: Use “Light Machining” value as starting feed rate.
Recommended Starting Feeds [mm]
At 3,50 Axial Depth of Cut (ap)
At 1,50 Axial Depth of Cut (ap)
At 0,75 Axial Depth of Cut (ap)
Light
Machining
General
Purpose
Heavy
Machining
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
MH 0,37
0,75
1,21 0,27
0,54
0,87 0,20
0,40
0,65 0,18
0,35
0,56 0,16
0,32
0,52 MH
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
MH 0,45
0,91
1,47 0,32
0,65
1,05 0,24
0,49
0,78 0,21
0,42
0,68 0,19
0,39
0,62 MH
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
MH 0,28
0,56
0,91 0,20
0,41
0,65 0,15
0,31
0,49 0,13
0,27
0,43 0,12
0,24
0,39 MH
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
MH 0,23
0,46
0,74 0,17
0,33
0,54 0,13
0,25
0,40 0,11
0,22
0,35 0,10
0,20
0,32 MH
At 0,50 Axial Depth of Cut (ap)
Recommended Starting Feeds
WID_Master16_IndexableMIlling_CopyMills_M044_M045_Metric_REBRAND.indd 45 10/29/15 2:16 PM
M46
LViWID M 16 I d bl MIlli C Mill M046 M047 M i REBRANDO b 14 201510 18AM
widia.com
Copy Mills • M170™ Series
Screw-On End Mills • RD0702..
Spare Parts
Screw-On End Mills
order number catalogue number D1 max D1 D DPM G3X L2 WF Ap1 max Z
max
ramp
angle max RPM
coolant
supply kg
3926607 M170D015Z02M08RD07 15 8 13 8,5 M8 23 10 3,5 2 18.0° 21200 Yes 0,03
3926608 M170D016Z03M08RD07 16 9 13 8,5 M8 23 10 3,5 3 9.0° 21200 Yes 0,03
3926609 M170D020Z04M10RD07 20 13 18 10,5 M10 30 14 3,5 4 12.5° 19600 Yes 0,06
3926610 M170D025Z05M12RD07 25 18 21 12,5 M12 35 19 3,5 5 8.5° 12700 Yes 0,10
3926611 M170D030Z05M16RD07 30 23 29 17,0 M16 43 22 3,5 5 6.5° 10600 Yes 0,20
3926612 M170D035Z06M16RD07 35 28 29 17,0 M16 43 22 3,5 6 4.8° 9900 Yes 0,23
• Premium nickel-coated bodies.
• Designed for maximum performance.
• Ideally suited for die and mould manufacturing.
insert
screw Nm Torx
193.341 1,0 12147549000
Copy Mills
NOTE: All spare parts except the insert screws must be ordered separately.
WID_Master16_IndexableMIlling_CopyMills_M046_M047_Metric_REBRAND.indd 46 10/29/15 2:16 PM
M47
LViWID M 16 I d bl MIlli C Mill M046 M047 M i REBRANDO b 14201510 18AM
widia.com
Copy Mills • M170™ Series
Weldon® Shanks • RD0702..
D1 max
insert
screw Nm
Torx
driver
15 193.341 1,0 12147549000
Spare Parts
Weldon Shanks
order number catalogue number D1 max D1 D L L2 BHTCA Ap1 max Z
max
ramp
angle max RPM
coolant
supply kg
3929403 M170D015Z02B16RD07 15 8 16 90 40 1.0° 3,5 2 18.0° 21200 Yes 0,11
• Premium nickel-coated bodies.
• Designed for maximum performance.
• Ideally suited for die and mould manufacturing.
NOTE: All spare parts except the insert screws must be ordered separately.
Copy Mills
WID_Master16_IndexableMIlling_CopyMills_M046_M047_Metric_REBRAND.indd 47 10/29/15 2:16 PM
M48
LViWID M 16 I d bl MIlli C Mill M048 M049 M i REBRANDO b 14 201510 18AM
widia.com
Copy Mills • M170™ Series
Cylindrical Shanks • RD0702..
Spare Parts
Cylindrical Shanks
order number catalogue number D1 max D1 D L L2 BHTCA Ap1 max Z
max
ramp
angle max RPM
coolant
supply kg
3929404 M170D015Z02A16RD07L110 15 8 16 110 60 0.5° 3,5 2 18.0° 21200 Yes 0,14
3929405 M170D015Z02A16RD07L150 15 8 16 150 60 0.5° 3,5 2 18.0° 21200 Yes 0,20
3929407 M170D016Z02A16RD07L150 16 9 16 150 30 — 3,5 2 9.0° 21200 Yes 0,21
3929406 M170D016Z03A16RD07L110 16 9 16 110 20 — 3,5 3 9.0° 21200 Yes 0,16
3929409 M170D020Z03A20RD07L140 20 13 20 140 40 — 3,5 3 12.0° 10600 Yes 0,29
3929408 M170D020Z04A20RD07L115 20 13 20 115 30 — 3,5 4 12.0° 10600 Yes 0,25
• Premium nickel-coated bodies.
• Designed for maximum performance.
• Ideally suited for die and mould manufacturing.
D1 max
insert
screw Nm
Torx
driver
15 193.341 1,0 12147549000
16 193.341 1,0 12147549000
20 193.341 1,0 12147549000
Copy Mills
NOTE: All spare parts except the insert screws must be ordered separately.
WID_Master16_IndexableMIlling_CopyMills_M048_M049_Metric_REBRAND.indd 48 10/29/15 2:16 PM
M49
LViWID M 16 I d bl MIlli C Mill M048 M049 M i REBRANDO b 14201510 18AM
widia.com
Copy Mills • M170™ Series
Inserts
Insert Selection Guide
Material
Group
Light
Machining
General
Purpose
Heavy
Machining
Geometry Grade Geometry Grade Geometry Grade
P1–P2
––
––
––
P3–P4
MH TN2505
MH TN6525
MH TN6540
P5–P6
MH TN2505
MH TN6525
MH TN6540
M1–M2
––
––
––
M3
––
––
––
K1–K2
MH TN2505
MH TN2505
MH TN6525
K3
MH TN2505
MH TN2505
MH TN6525
N1–N2
––
––
––
N3
––
––
––
S1–S2
––
––
––
S3
––
––
––
S4
––
––
––
H1
MH TN2505
MH TN2505
––
P
M
K
N
S
H
RDPX-MH
catalogue number D S hm
TN2505
TN6525
TN6540
RDPX0702M0SNMH 7,00 2,38 0,08
3959627
3959626
3959625
• -MH geometry is suitable for high-strength steels,
cast iron, and hard machining.
rst choice
alternate choice
RDPX-MH
iC07 • Inserts
Copy Mills
WID_Master16_IndexableMIlling_CopyMills_M048_M049_Metric_REBRAND.indd 49 10/29/15 2:16 PM
M50
LViWID M 16 I d bl MIlli C Mill M050 M051 M i REBRANDD b 2 20153 02PM
widia.com
Copy Mills • M170™ Series
Recommended Starting Speeds
NOTE: FIRST choice starting speeds are in bold type.
As the average chip thickness increases, the speed should be decreased.
Copy Mills
Recommended Starting Speeds [m/min]
Material
Group TN2505 TN6525 TN6540
P
1
550
420
360 410
320
280 360
280
240
2
320
240
205 320
250
215 250
190
170
3
320
240
205 280
215
185 215
170
140
4
–
–
– 235
170
145 180
130
110
5
–
–
– 310
235
200 240
180
150
6
–
–
– 205
160
130 160
120
100
M
1
–
–
– 190
120
80 130
80
60
2
–
–
– 120
80
50 80
50
40
3
–
–
– 125
80
55 85
50
40
K
1
400
300
250 275
245
220 220
205
180
2
540
365
280 215
190
180 175
155
140
3
310
190
155 180
160
145 155
145
125
N
1
–
–
––
–
––
–
–
2
–
–
––
–
––
–
–
3
–
–
––
–
––
–
–
S
1
–
–
––
–
–50
35
30
2
–
–
––
–
–25
20
10
3
–
–
––
–
–70
40
30
4
–
–
––
–
–60
30
25
H
1
175
140
95 –
–
––
–
–
2
175
140
95 –
–
––
–
–
3
140
115
80 –
–
––
–
–
NOTE: Use “Light Machining” value as starting feed rate.
Recommended Starting Feeds [mm] Light
Machining
General
Purpose
Heavy
Machining
At 0,75 Axial Depth of Cut (ap)
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
MH 0,37
0,75
1,21 0,27
0,54
0,87 0,20
0,40
0,65 0,18
0,35
0,56 0,16
0,32
0,52 MH
At 1,50 Axial Depth of Cut (ap)
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
MH 0,28
0,56
0,91 0,20
0,41
0,65 0,15
0,31
0,49 0,13
0,27
0,43 0,12
0,24
0,39 MH
At 3,50 Axial Depth of Cut (ap)
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
MH 0,23
0,46
0,74 0,17
0,33
0,54 0,13
0,25
0,40 0,11
0,22
0,35 0,10
0,20
0,32 MH
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
MH 0,45
0,91
1,47 0,32
0,65
1,05 0,24
0,49
0,78 0,21
0,42
0,68 0,19
0,39
0,62 MH
At 0,50 Axial Depth of Cut (ap)
Recommended Starting Feeds
WID_Master16_IndexableMIlling_CopyMills_M050_M051_Metric_REBRAND.indd 50 12/2/15 3:02 PM
M51
LViWID M 16 I d bl MIlli C Mill M050 M051 M i REBRANDD b 220153 02PM
widia.com
Copy Mills • M170™ Series
Additional Application Advice • RD07..
1. fz depends on the Ap1 and ae values
2. Ap1 and vc corrections depend on L/D ratio
With round inserts, two factors can affect the hm: Ap1 and ae.
fz has to be adjustedaccordingly.
With increasing L/D ratios, or overhang, vibrations can occur due to reduced
rigidity. Toensure successful application, it is recommended to adjust Ap1
and vc values according tothe following table:
Example application
highlighted.
Selecting the Correct Cutting Values
ae engagement 10% 20% 30% 40% 50% 100%
Ap1 = 0,5mm 0,59mm 0,42mm 0,34mm 0,30mm 0,26mm 0,19mm
Ap1 = 0,75mm 0,50mm 0,36mm 0,29mm 0,25mm 0,22mm 0,16mm
Ap1 = 1mm 0,42mm 0,30mm 0,24mm 0,21mm 0,19mm 0,13mm
Ap1 = 1,5mm 0,34mm 0,24mm 0,20mm 0,17mm 0,15mm 0,11mm
Ap1 = 3,5mm 0,22mm 0,16mm 0,13mm 0,11mm 0,10mm 0,08mm
Recommended Starting Feed Rate Values (fz) Related to the Ap1 and ae Values:
Example Cutting Conditions for RD..07... Insert in Pocketing, L/D ratio = 2 x D:
insert = RDPX0702M0SNMH
TN2505 TN6525 TN6540
feed per tooth fz (mm)/ae>50%
min med max min med max min med max
ae>50% Recommended starting Ap1 = 0,5mm 0,19mm 0,22mm 0,30mm 0,19mm 0,30mm 0,35mm 0,19mm 0,30mm 0,40mm
D
L
D
L
D
L
L/D ratio
% of Ap1 max
to reduce
% of vc
to reduce
<2 0% 0%
2<L/D<4 65–75% 10–15%
>4 80–95% 20–40%
Recommended Cutting Conditions • Helical Interpolation from Solid
cutter diameter
min hole
diameter
max hole diameter
(fl at bottom)
Ap1 max
per revolution
max
ramp angle
Ap1 max
when plunging
12 17mm 17mm 3,5mm 22° 1mm
15 18mm 23mm 2,8mm 18° 2,2mm
16 20mm 25mm 1,9mm 9° 1,4mm
20 28mm 33mm 3,5mm 12° 1,5mm
25 36,5mm 43mm 3,5mm 8.5° 2,5mm
30 46,4mm 53mm 3,5mm 6.5° 2,5mm
Cutter
Diameter
Hole
Diameter
WID_Master16_IndexableMIlling_CopyMills_M050_M051_Metric_REBRAND.indd 51 12/2/15 3:02 PM
M52
LViWID M 16 I d bl MIlli C Mill M052 M053 M i REBRANDO b 14 201510 19AM
widia.com
Copy Mills • M170™ Series
Screw-On End Mills • RD1003..
insert
screw Nm
Torx
driver
193.342 3,5 12148082400
Spare Parts
Screw-On End Mills
order number catalogue number D1 max D1 D DPM G3X L2 WF Ap1 max Z
max
ramp
angle max RPM
coolant
supply kg
3934647 M170D020Z02M10RD10 20 10 18 10,5 M10 30 15 5,0 2 20.0° 15900 Yes 0,06
3934648 M170D025Z02M12RD10 25 15 21 12,5 M12 35 19 5,0 2 8.0° 12800 Yes 0,10
3934649 M170D025Z03M12RD10 25 15 21 12,5 M12 35 19 5,0 3 8.0° 12800 Yes 0,10
3934650 M170D030Z04M16RD10 30 20 29 17,0 M16 43 22 5,0 4 10.0° 10600 Yes 0,24
3934651 M170D035Z05M16RD10 35 25 29 17,0 M16 45 22 5,0 5 8.5° 9100 Yes 0,23
3934652 M170D042Z06M16RD10 42 32 29 17,0 M16 45 22 5,0 6 6.0° 7800 Yes 0,28
Copy Mills
• Premium nickel-coated bodies.
• Designed for maximum performance.
• Ideally suited for die and mould manufacturing.
NOTE: All spare parts except the insert screws must be ordered separately.
WID_Master16_IndexableMIlling_CopyMills_M052_M053_Metric_REBRAND.indd 52 10/29/15 2:16 PM
M53
LViWID M 16 I d bl MIlli C Mill M052 M053 M i REBRANDO b 14201510 19AM
widia.com
Copy Mills • M170™ Series
Weldon® Shanks • RD1003..
Spare Parts
Weldon Shanks
order number catalogue number D1 max D1 D L L2 Ap1 max Z
max
ramp
angle max RPM
coolant
supply kg
3940703 M170D020Z02B20RD10 20 10 20 110 40 5,0 2 20.0° 15900 Yes 0,24
3940708 M170D025Z03B25RD10 25 15 25 110 40 5,0 3 9.0° 12900 Yes 0,35
• Premium nickel-coated bodies.
• Designed for maximum performance.
• Ideally suited for die and mould manufacturing.
D1 max
insert
screw Nm
Torx
driver
20 193.342 3,5 12148082400
25 193.342 3,5 12148082400
Copy Mills
NOTE: All spare parts except the insert screws must be ordered separately.
WID_Master16_IndexableMIlling_CopyMills_M052_M053_Metric_REBRAND.indd 53 10/29/15 2:16 PM
M54
LViWID M 16 I d bl MIlli C Mill M054 M055 M i REBRANDO b 14 201510 19AM
widia.com
Copy Mills • M170™ Series
Cylindrical Shanks • RD1003..
insert
screw Nm
Torx
driver
193.342 3,5 12148082400
Spare Parts
Cylindrical Shanks
order number catalogue number D1 max D1 D L L2 BHTCA Ap1 max Z
max
ramp
angle max RPM
coolant
supply kg
3940704 M170D020Z02A20RD10L140 20 10 20 140 60 — 5,0 2 20.0° 15900 Yes 0,30
3940705 M170D020Z02A25RD10L160 20 10 25 160 80 2.0° 5,0 2 20.0° 15900 Yes 0,48
3940706 M170D020Z02A25RD10L180 20 10 25 180 100 1.5° 5,0 2 20.0° 15900 Yes 0,53
3940707 M170D022Z02A20RD10L160 22 12 20 160 40 — 5,0 2 12.0° 14400 Yes 0,35
3940709 M170D025Z02A25RD10L180 25 15 25 180 70 — 5,0 2 9.0° 12800 Yes 0,61
3940710 M170D025Z02A25RD10L220 25 15 25 220 100 — 5,0 2 9.0° 12800 Yes 0,74
3940711 M170D028Z02A25RD10L200 28 18 25 200 40 — 5,0 2 15.0° 11300 Yes 0,74
Copy Mills
• Premium nickel-coated bodies.
• Designed for maximum performance.
• Ideally suited for die and mould manufacturing.
NOTE: All spare parts except the insert screws must be ordered separately.
WID_Master16_IndexableMIlling_CopyMills_M054_M055_Metric_REBRAND.indd 54 10/29/15 2:16 PM
M55
LViWID M 16 I d bl MIlli C Mill M054 M055 M i REBRANDO b 14201510 19AM
widia.com
Copy Mills • M170™ Series
Shell Mills • RD1003..
Spare Parts
Shell Mills
order number catalogue number D1 max D1 D D6 L Ap1 max Z
max
ramp
angle max RPM
coolant
supply kg
3940712 M170D040Z05RD10 40 30 16 37 40 5,0 5 7.2° 9950 Yes 0,28
3940723 M170D042Z05RD10 42 32 16 37 40 5,0 5 5.8° 9500 Yes 0,28
3940724 M170D050Z06RD10 50 40 22 44 40 5,0 6 5.2° 7950 Yes 0,35
3940725 M170D052Z06RD10 52 42 22 44 50 5,0 6 3.0° 7650 Yes 0,51
• Premium nickel-coated bodies.
• Designed for maximum performance.
• Ideally suited for die and mould manufacturing.
D1 max
insert
screw Nm
Torx
driver
socket-head
cap screw
low-head
cap screw
socket-head cap screw
with coolant groove
40 193.342 3,5 12148082400 MS1294 — MS1294CG
42 193.342 3,5 12148082400 MS1294 — MS1294CG
50 193.342 3,5 12148082400 — 129.025 MS2072CG
52 193.342 3,5 12148082400 — 129.025 MS2072CG
Copy Mills
NOTE: All spare parts except the insert screws must be ordered separately.
WID_Master16_IndexableMIlling_CopyMills_M054_M055_Metric_REBRAND.indd 55 10/29/15 2:16 PM
M56
LViWID M 16 I d bl MIlli C Mill M056 M057 M i REBRANDN b 12 20158 45AM
widia.com
Copy Mills • M170™ Series
Inserts
Copy Mills
Insert Selection Guide
Material
Group
Light
Machining
General
Purpose
Heavy
Machining
Geometry Grade Geometry Grade Geometry Grade
P1–P2
MM TN6525
MM TN6525
MM TN6540
P3–P4
MH TN2505
MH TN6525
MH TN6540
P5–P6
MH TN2505
MH TN6525
MH TN6540
M1–M2
––
MM TN6525
MM TN6540
M3
––
MM TN6525
MM TN6540
K1–K2
MH TN2505
MH TN2505
MH TN6525
K3
MH TN2505
MH TN2505
MH TN6525
N1–N2
––
––
––
N3
––
––
––
S1–S2
––
MM TN6540
––
S3
––
MM TN6540
––
S4
––
MM TN6540
––
H1
MH TN2505
MH TN2505
––
RDPX-MM
catalogue number D S hm
TN2505
TN6525
TN6540
RDPX1003M0SNMM 10,00 3,18 0,11
–
3959633
3959582
• -MM geometry is the best option for general-purpose use,
materials, and applications. Used for reduced cutting forces.
rst choice
alternate choice
RDPX-MM
RDPX-MH
catalogue number D S hm
TN2505
TN6525
TN6540
RDPX1003M0SNMH 10,00 3,18 0,12
3959581
3959580
3959579
• -MH geometry is the rst choice for heavy machining.
• Suitable for high-strength steels, cast iron, and hard machining.
iC10 • Inserts
P
M
K
N
S
H
RDPX-MH
WID_Master16_IndexableMIlling_CopyMills_M056_M057_Metric_REBRAND.indd 56 11/12/15 8:55 AM
M57
LViWID M 16 I d bl MIlli C Mill M056 M057 M i REBRANDN b 1220158 45AM
widia.com
Copy Mills • M170™ Series
Recommended Starting Speeds
NOTE: FIRST choice starting speeds are in bold type.
As the average chip thickness increases, the speed should be decreased.
Copy Mills
Recommended Starting Speeds [m/min]
Material
Group TN2505 TN6525 TN6540
P
1
550
420
360 410
320
280 360
280
240
2
320
240
205 320
250
215 250
190
170
3
320
240
205 280
215
185 215
170
140
4
–
–
– 235
170
145 180
130
110
5
–
–
– 310
235
200 240
180
150
6
–
–
– 205
160
130 160
120
100
M
1
–
–
– 190
120
80 130
80
60
2
–
–
– 120
80
50 80
50
40
3
–
–
– 125
80
55 85
50
40
K
1
400
300
250 275
245
220 220
205
180
2
540
365
280 215
190
180 175
155
140
3
310
190
155 180
160
145 155
145
125
N
1
–
–
––
–
––
–
–
2
–
–
––
–
––
–
–
3
–
–
––
–
––
–
–
S
1
–
–
––
–
–50
35
30
2
–
–
––
–
–25
20
10
3
–
–
––
–
–70
40
30
4
–
–
––
–
–60
30
25
H
1
175
140
95 –
–
––
–
–
2
175
140
95 –
–
––
–
–
3
140
115
80 –
–
––
–
–
NOTE: Use “Light Machining” value as starting feed rate.
Light
Machining
General
Purpose
Heavy
Machining
At 1,00 Axial Depth of Cut (ap)
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
MM 0,47
0,68
1,25 0,34
0,49
0,89 0,25
0,37
0,67 0,22
0,32
0,58 0,20
0,29
0,53 MM
MH 0,56
0,98
1,66 0,40
0,71
1,18 0,30
0,53
0,88 0,26
0,46
0,76 0,24
0,42
0,70 MH
At 2,00 Axial Depth of Cut (ap)
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry
5% 10% 20% 30% 40–100%
MM 0,35
0,51
0,93 0,25
0,37
0,67 0,19
0,28
0,50 0,17
0,24
0,44 0,15
0,22
0,40 MM
MH 0,42
0,73
1,23 0,30
0,53
0,88 0,23
0,39
0,66 0,20
0,34
0,57 0,18
0,32
0,53 MH
At 5,00 Axial Depth of Cut (ap)
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
MM 0,28
0,41
0,74 0,20
0,29
0,53 0,15
0,22
0,4 0,13
0,19
0,35 0,12
0,18
0,32 MM
MH 0,33
0,58
0,98 0,24
0,42
0,71 0,18
0,32
0,53 0,16
0,28
0,46 0,14
0,25
0,42 MH
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
MM 0,64
0,94
1,73 0,46
0,68
1,24 0,35
0,51
0,92 0,30
0,44
0,80 0,28
0,40
0,73 MM
MH 0,77
1,36
2,31 0,55
0,97
1,63 0,41
0,73
1,21 0,36
0,63
1,05 0,33
0,58
0,96 MH
At 0,50 Axial Depth of Cut (ap)
Recommended Starting Feeds [mm]
Recommended Starting Feeds
WID_Master16_IndexableMIlling_CopyMills_M056_M057_Metric_REBRAND.indd 57 11/12/15 8:55 AM
M58
LViWID M 16 I d bl MIlli C Mill M058 M059 M i REBRANDO b 14 201510 19AM
widia.com
Copy Mills • M170™ Series
Additional Application Advice • RD1003..
1. fz depends on the Ap1 and ae values
2. Ap1 and vc corrections depend on L/D ratio
With increasing L/D ratios, or overhang, vibrations can occur due to reduced
rigidity. Toensure successful application, it is recommended to adjust Ap1
and vc values according tothe following table:
Example application
highlighted.
Selecting the Correct Cutting Values
Recommended Starting Feed Rate Values (fz) Related to the Ap1 and ae Values:
Example Cutting Conditions for RD..10... Insert in Pocketing, L/D ratio = 2 x D:
D
L
D
L
D
L
Recommended Cutting Conditions • Helical Interpolation from Solid
Cutter
Diameter
Hole
Diameter
L/D ratio
% of Ap1 max
to reduce
% of vc
to reduce
<2 0% 0%
2<L/D<4 65–75% 10–15%
>4 80–95% 20–40%
cutter diameter
min hole
diameter
max hole diameter
(fl at bottom)
Ap1 max per
revolution
max ramp
angle
Ap1 max
when plunging
20 22mm 30mm 2,1mm 20° 4mm
22 24mm 34mm 2,1mm 20° 2,4mm
25 33mm 40mm 3,2mm 8° 1,7mm
28 36mm 46mm 5mm 15° 3,8mm
30 40,6mm 50mm 5mm 10° 3,4mm
35 50,7mm 60mm 5mm 8,5° 3,4mm
40 60,5mm 70mm 5mm 7,2° 3,6mm
42 64,5mm 74mm 5mm 5,8° 3,6mm
50 80,3mm 90mm 5mm 5,2° 4mm
52 85,8mm 94mm 5mm 3° 2,2mm
insert = RDPX1003M0SN
TN2505 TN6525 TN6540
feed per tooth fz (mm)/ae>50%
min med max min med max min med max
Edge Geometry MM ae>50% Recommended starting Ap1 = 1mm – – – 0,25mm 0,30mm 0,40mm 0,25mm 0,32mm 0,45mm
Edge Geometry MH ae>50% Recommended starting Ap1 = 1mm 0,25mm 0,32mm 0,40mm 0,25mm 0,35mm 0,55mm 0,25mm 0,45mm 0,65mm
ae engagement 10% 20% 30% 40% 50% 100%
Ap1 = 0,5mm 1,18mm 0,70mm 0,63mm 0,56mm 0,50mm 0,35mm
Ap1 = 0,75mm 0,95mm 0,62mm 0,56mm 0,50mm 0,45mm 0,30mm
Ap1 = 1mm 0,80mm 0,57mm 0,46mm 0,40mm 0,36mm 0,25mm
Ap1 = 2mm 0,57mm 0,40mm 0,33mm 0,28mm 0,25mm 0,18mm
Ap1 = 3mm 0,46mm 0,33mm 0,27mm 0,23mm 0,21mm 0,15mm
Ap1 = 5mm 0,36mm 0,25mm 0,21mm 0,18mm 0,16mm 0,11mm
With round inserts, two factors can affect the hm: Ap1 and ae.
fz has to be adjustedaccordingly.
WID_Master16_IndexableMIlling_CopyMills_M058_M059_Metric_REBRAND.indd 58 10/29/15 2:16 PM
M59
LViWID M 16 I d bl MIlli C Mill M058 M059 M i REBRANDO b 14201510 19AM
widia.com
Copy Mills • M170™ Series
Screw-On End Mills • RD12T3..
D1 max
insert
screw Nm
clamp
screw
Torx
driver
24 193.342 3,5 193.338 12148082400
35 193.342 3,5 193.338 12148082400
42 193.342 3,5 193.338 12148082400
Spare Parts
Screw-On End Mills
order number catalogue number D1 max D1 D DPM G3X L2 WF Ap1 max Z
max
ramp
angle max RPM
coolant
supply kg
3930950 M170D024Z02M12RD12 24 12 21 12,5 M12 35 19 6,0 2 15.0° 13200 Yes 0,08
3930954 M170D035Z03M16RD12 35 23 29 17,0 M16 43 22 6,0 3 11.0° 9900 Yes 0,22
3930956 M170D035Z04M16RD12 35 23 29 17,0 M16 43 22 6,0 4 10.5° 9900 Yes 0,21
3930958 M170D042Z05M16RD12 42 30 29 17,0 M16 43 22 6,0 5 7.2° 7500 Yes 0,26
Copy Mills
• Premium nickel-coated bodies.
• Designed for maximum performance.
• Ideally suited for die and mould manufacturing.
NOTE: All spare parts except the insert screws must be ordered separately.
WID_Master16_IndexableMIlling_CopyMills_M058_M059_Metric_REBRAND.indd 59 10/29/15 2:16 PM
M60
LViWID M 16 I d bl MIlli C Mill M060 M061 M i REBRANDO b 14 201510 19AM
widia.com
Copy Mills • M170™ Series
Weldon® Shanks • RD12T3..
Spare Parts
Weldon Shanks
order number catalogue number D1 max D1 D L L2 Ap1 max Z
max
ramp
angle max RPM
coolant
supply kg
3930960 M170D032Z03B32RD12 32 20 32 125 64 6,0 3 12.0° 9500 Yes 0,63
• Premium nickel-coated bodies.
• Designed for maximum performance.
• Ideally suited for die and mould manufacturing.
D1 max
insert
screw Nm
clamp
screw
Torx
driver
32 193.342 3,5 193.338 12148082400
Copy Mills
NOTE: All spare parts except the insert screws must be ordered separately.
WID_Master16_IndexableMIlling_CopyMills_M060_M061_Metric_REBRAND.indd 60 10/29/15 2:16 PM
M61
LViWID M 16 I d bl MIlli C Mill M060 M061 M i REBRANDO b 14201510 19AM
widia.com
Copy Mills • M170™ Series
Cylindrical Shanks • RD12T3..
D1 max
insert
screw Nm
clamp
screw
Torx
driver
32 193.342 3,5 193.338 12148082400
35 193.342 3,5 193.338 12148082400
Spare Parts
Cylindrical Shanks
order number catalogue number D1 max D1 D L L2 Ap1 max Z
max
ramp
angle max RPM
coolant
supply kg
3930962 M170D032Z02A32RD12L200 32 20 32 200 65 6,0 2 12.0° 9500 Yes 1,12
3930964 M170D032Z02A32RD12L300 32 20 32 300 65 6,0 2 12.0° 9500 Yes 1,74
3930966 M170D035Z02A32RD12L300 35 23 32 300 40 6,0 2 11.0° 9100 Yes 1,79
• Premium nickel-coated bodies.
• Designed for maximum performance.
• Ideally suited for die and mould manufacturing.
NOTE: All spare parts except the insert screws must be ordered separately.
Copy Mills
WID_Master16_IndexableMIlling_CopyMills_M060_M061_Metric_REBRAND.indd 61 10/29/15 2:16 PM
M62
LViWID M 16 I d bl MIlli C Mill M062 M063 M i REBRANDO b 14 201510 20AM
widia.com
Copy Mills • M170™ Series
Shell Mills • RD12T3..
Spare Parts
Shell Mills
order number catalogue number D1 max D1 D D6 L Ap1 max Z
max
ramp
angle max RPM
coolant
supply kg
3930968 M170D040Z04RD12 40 28 16 37 40 6,0 4 9.3° 7000 Yes 0,22
3930970 M170D050Z05RD12 50 38 22 44 40 6,0 5 6.1° 7950 Yes 0,32
3930972 M170D052Z05RD12 52 40 22 44 50 6,0 5 4.5° 7600 Yes 0,44
3930975 M170D063Z06RD12 63 51 22 44 40 6,0 6 4.5° 6300 Yes 0,45
3930976 M170D066Z06RD12 66 54 27 60 50 6,0 6 4.5° 6030 Yes 0,81
3930979 M170D080Z07RD12 80 68 27 60 50 6,0 7 3.5° 4900 Yes 0,97
3930981 M170D100Z08RD12 100 88 32 80 55 6,0 8 2.2° 3900 Yes 1,95
• Premium nickel-coated bodies.
• Designed for maximum performance.
• Ideally suited for die and mould manufacturing.
D1 max
insert
screw Nm
clamp
screw
Torx
driver
low-head
cap screw
low-head cap screw
with coolant groove
socket-head
cap screw
socket-head cap screw
with coolant groove
40 193.342 3,5 193.338 12148082400 — — MS1294 MS1294CG
50 193.342 3,5 193.338 12148082400 129.025 — — MS2072CG
52 193.342 3,5 193.338 12148082400 129.025 — — MS2072CG
63 193.342 3,5 193.338 12148082400 129.025 — — MS2072CG
66 193.342 3,5 193.338 12148082400 — — MS2038 MS2038CG
80 193.342 3,5 193.338 12148082400 — — MS2038 MS2038CG
100 193.342 3,5 193.338 12148082400 MS1254 MS1254CG — —
Copy Mills
NOTE: Socket-head cap screw, socket-head cap screw with coolant groove, low-head cap screw with coolant groove, and Torx driver must be ordered separately.
WID_Master16_IndexableMIlling_CopyMills_M062_M063_Metric_REBRAND.indd 62 10/29/15 2:16 PM
M63
LViWID M 16 I d bl MIlli C Mill M062 M063 M i REBRANDO b 14201510 20AM
widia.com
Copy Mills • M170™ Series
Inserts
Insert Selection Guide
Material
Group
Light
Machining
General
Purpose
Heavy
Machining
Geometry Grade Geometry Grade Geometry Grade
P1–P2
MM TN6525
MM TN6525
MM TN6540
P3–P4
MH TN2505
MH TN6525
MH TN6540
P5–P6
MH TN2505
MH TN6525
MH TN6540
M1–M2
––
MM TN6525
MM TN6540
M3
––
MM TN6525
MM TN6540
K1–K2
MH TN2505
MH TN2505
MH TN6525
K3
MH TN2505
MH TN2505
MH TN6525
N1–N2
––
––
––
N3
––
––
––
S1–S2
––
MM TN6540
––
S3
––
MM TN6540
––
S4
––
MM TN6540
––
H1
MH TN2505
MH TN2505
––
RDPX-MM
catalogue number D S hm
TN2505
TN6525
TN6540
RDPX12T3M0SNMM 12,00 3,97 0,13
–
3959624
3959623
• -MM geometry is the best option for general-purpose use,
materials, and applications. Used for reduced cutting forces.
rst choice
alternate choice
RDPX-MM
RDPX-MH
catalogue number D S hm
TN2505
TN6525
TN6540
RDPX12T3M0SNMH 12,00 3,97 0,17
3959622
3959621
3959620
• -MH geometry is the rst choice for heavy machining.
• Suitable for high-strength steels, cast iron, and hard machining.
RDHX-MH
iC12 • Inserts
P
M
K
N
S
H
Copy Mills
WID_Master16_IndexableMIlling_CopyMills_M062_M063_Metric_REBRAND.indd 63 10/29/15 2:16 PM
M64
LViWID M 16 I d bl MIlli C Mill M064 M065 M i REBRANDN b 12 20158 46AM
widia.com
Copy Mills • M170™ Series
Recommended Starting Speeds
NOTE: FIRST choice starting speeds are in bold type.
As the average chip thickness increases, the speed should be decreased.
Copy Mills
Recommended Starting Speeds [m/min]
Material
Group TN2505 TN6525 TN6540
P
1
550
420
360 410
320
280 360
280
240
2
320
240
205 320
250
215 250
190
170
3
320
240
205 280
215
185 215
170
140
4
–
–
– 235
170
145 180
130
110
5
–
–
– 310
235
200 240
180
150
6
–
–
– 205
160
130 160
120
100
M
1
–
–
– 190
120
80 130
80
60
2
–
–
– 120
80
50 80
50
40
3
–
–
– 125
80
55 85
50
40
K
1
400
300
250 275
245
220 220
205
180
2
540
365
280 215
190
180 175
155
140
3
310
190
155 180
160
145 155
145
125
N
1
–
–
––
–
––
–
–
2
–
–
––
–
––
–
–
3
–
–
––
–
––
–
–
S
1
–
–
––
–
–50
35
30
2
–
–
––
–
–25
20
10
3
–
–
––
–
–70
40
30
4
–
–
––
–
–60
30
25
H
1
175
140
95 –
–
––
–
–
2
175
140
95 –
–
––
–
–
3
140
115
80 –
–
––
–
–
NOTE: Use “Light Machining” value as starting feed rate.
Light
Machining
General
Purpose
Heavy
Machining
At 2,00 Axial Depth of Cut (ap)
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
MM 0,44
0,65
1,02 0,32
0,47
0,73 0,24
0,35
0,55 0,21
0,30
0,48 0,19
0,28
0,44 MM
MH 0,47
0,94
1,59 0,34
0,68
1,13 0,25
0,50
0,84 0,22
0,44
0,73 0,20
0,40
0,67 MH
At 3,00 Axial Depth of Cut (ap)
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
MM 0,38
0,56
0,88 0,28
0,40
0,63 0,21
0,30
0,47 0,18
0,26
0,41 0,17
0,24
0,38 MM
MH 0,40
0,81
1,36 0,29
0,58
0,97 0,22
0,43
0,72 0,19
0,38
0,63 0,17
0,35
0,58 MH
At 6,00 Axial Depth of Cut (ap)
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
MM 0,33
0,48
0,76 0,24
0,35
0,54 0,18
0,26
0,41 0,16
0,23
0,35 0,14
0,21
0,33 MM
MH 0,35
0,70
1,17 0,25
0,50
0,84 0,19
0,38
0,63 0,16
0,33
0,55 0,15
0,30
0,50 MH
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
MM 0,60
0,88
1,38 0,43
0,63
0,99 0,32
0,47
0,74 0,28
0,41
0,64 0,26
0,38
0,59 MM
MH 0,63
1,28
2,16 0,45
0,91
1,53 0,34
0,68
1,14 0,30
0,59
0,99 0,27
0,54
0,90 MH
At 1,00 Axial Depth of Cut (ap)
Recommended Starting Feeds [mm]
Recommended Starting Feeds
WID_Master16_IndexableMIlling_CopyMills_M064_M065_Metric_REBRAND.indd 64 11/12/15 8:55 AM
M65
LViWID M 16 I d bl MIlli C Mill M064 M065 M i REBRANDN b 1220158 46AM
widia.com
Copy Mills • M170™ Series
Additional Application Advice • RD12T3..
1. fz depends on the Ap1 and ae values
2. Ap1 and vc corrections depend on L/D ratio
Example application
highlighted.
Selecting the Correct Cutting Values
Recommended Starting Feed Rate Values (fz) Related to the Ap1 and ae Values:
Example Cutting Conditions for RD..10... Insert in Pocketing, L/D ratio = 2 x D:
D
L
D
L
D
L
Recommended Cutting Conditions • Helical Interpolation from Solid
Cutter
Diameter
Hole
Diameter
With round inserts, two factors can affect the hm: Ap1 and ae.
fz has to be adjustedaccordingly.
ae engagement 10% 20% 30% 40% 50% 100%
Ap1 = 1mm 1,01mm 0,77mm 0,63mm 0,55mm 0,49mm 0,35mm
Ap1 = 2mm 0,77mm 0,55mm 0,45mm 0,39mm 0,35mm 0,24mm
Ap1 = 3mm 0,63mm 0,45mm 0,37mm 0,32mm 0,28mm 0,20mm
Ap1 = 4mm 0,55mm 0,39mm 0,32mm 0,27mm 0,24mm 0,17mm
Ap1 = 5mm 0,49mm 0,35mm 0,28mm 0,24mm 0,22mm 0,15mm
Ap1 = 6mm 0,45mm 0,32mm 0,26mm 0,22mm 0,20mm 0,14mm
insert = RDPX12T3M0SN
TN2505 TN6525 TN6540
feed per tooth fz (mm)/ae>50%
min med max min med max min med max
Edge Geometry MM ae>50% Recommended starting Ap1 = 2mm – – – 0,24mm 0,30mm 0,50mm 0,24mm 0,40mm 0,60mm
Edge Geometry MH ae>50% Recommended starting Ap1 = 2mm 0,24mm 0,30mm 0,50mm 0,24mm 0,40mm 0,65mm 0,24mm 0,50mm 0,70mm
L/D ratio
% of Ap1 max
to reduce
% of vc
to reduce
<2 0% 0%
2<L/D<4 65–75% 10–15%
>4 80–95% 20–40%
With increasing L/D ratios, or overhang, vibrations can occur due to reduced
rigidity. Toensure successful application, it is recommended to adjust Ap1
and vc values according tothe following table:
cutter diameter
min hole
diameter
max hole diameter
(fl at bottom)
Ap1 max per
revolution
max ramp
angle
Ap1 max
when plunging
24 25,6mm 36mm 1,3mm 15° 3mm
32 40,6mm 52mm 5,3mm 12° 4,4mm
35 46,9mm 58mm 6mm 11° 3,9mm
40 57,4mm 68mm 6mm 9.3° 3,3mm
42 61,2mm 72mm 6mm 7.2° 3,5mm
50 77,4mm 88mm 6mm 6.1° 3,5mm
52 81,3mm 92mm 6mm 4.5° 3,2mm
63 102,4mm 114mm 6mm 4.5° 4,6mm
66 108,5mm 120mm 6mm 4.5° 4,4mm
80 136,5mm 148mm 6mm 3.5° 4,2mm
100 176,5mm 188mm 6mm 2.2° 4,2mm
WID_Master16_IndexableMIlling_CopyMills_M064_M065_Metric_REBRAND.indd 65 11/12/15 8:55 AM
M66
LViWID M 16 I d bl MIlli C Mill M066 M067 M i REBRANDO b 14 201510 20AM
widia.com
Copy Mills • M170™ Series
Screw-On End Mills • RD1604..
D1 max
insert
screw Nm
Torx
driver
32 193.343 6,0 12148099400
Spare Parts
Screw-On End Mills
order number catalogue number D1 max D1 D DPM G3X L2 WF Ap1 max Z
max
ramp
angle max RPM
coolant
supply kg
3926601 M170D032Z02M16RD16 32 16 29 17,0 M16 43 22 8,0 2 20.0° 9950 Yes 0,17
Copy Mills
• Premium nickel-coated bodies.
• Designed for maximum performance.
• Ideally suited for die and mould manufacturing.
NOTE: All spare parts except the insert screws must be ordered separately.
WID_Master16_IndexableMIlling_CopyMills_M066_M067_Metric_REBRAND.indd 66 10/29/15 2:16 PM
M67
LViWID M 16 I d bl MIlli C Mill M066 M067 M i REBRANDO b 14201510 20AM
widia.com
Copy Mills • M170™ Series
Shell Mills • RD1604..
Spare Parts
Shell Mills
order number catalogue number D1 max D1 D D6 L Ap1 max Z
max
ramp
angle max RPM
coolant
supply kg
3926602 M170D050Z04RD16 50 34 22 44 40 8,0 4 8.5° 7900 Yes 0,28
3934623 M170D052Z04RD16 52 36 22 44 50 8,0 4 8.2° 7650 Yes 0,36
3934624 M170D063Z05RD16 63 47 22 44 40 8,0 5 5.5° 5300 Yes 0,39
3934625 M170D066Z05RD16 66 50 27 60 50 8,0 5 4.0° 6000 Yes 0,74
3934626 M170D080Z06RD16 80 64 27 60 50 8,0 6 3.0° 4900 Yes 1,06
3934628 M170D100Z07RD16 100 84 32 80 55 8,0 7 2.4° 3950 Yes 1,94
3934629 M170D125Z08RD16 125 109 40 90 60 8,0 8 2.2° 3200 Yes 2,90
• Premium nickel-coated bodies.
• Designed for maximum performance.
• Ideally suited for die and mould manufacturing.
D1 max
insert
screw Nm
clamp
screw
Torx
driver
low-head
cap screw
low-head cap screw
with coolant groove
socket-head
cap screw
socket-head cap screw
with coolant groove
coolant
lock screw
coolant
cap
50 193.343 6,0 193.383 12148099400 129.025 — — MS2072CG — —
52 193.343 6,0 193.383 12148099400 129.025 — — MS2072CG — —
63 193.343 6,0 193.383 12148099400 129.025 — — MS2072CG — —
66 193.343 6,0 193.383 12148099400 — — MS2038 MS2038CG — —
80 193.343 6,0 193.383 12148099400 — — MS2038 MS2038CG — —
100 193.343 6,0 193.383 12148099400 MS1254 MS1254CG — — — —
125 193.343 6,0 193.383 12148099400 129.512 — — — 420.200 470.232
Copy Mills
NOTE: All spare parts except the insert screws and clamp screws must be ordered separately.
WID_Master16_IndexableMIlling_CopyMills_M066_M067_Metric_REBRAND.indd 67 10/29/15 2:17 PM
M68
LViWID M 16 I d bl MIlli C Mill M068 M069 M i REBRANDO b 14 201510 20AM
widia.com
Copy Mills • M170™ Series
Inserts
Copy Mills
Insert Selection Guide
Material
Group
Light
Machining
General
Purpose
Heavy
Machining
Geometry Grade Geometry Grade Geometry Grade
P1–P2
MM TN6525
MM TN6525
MM TN6540
P3–P4
MH TN2505
MH TN6525
MH TN6540
P5–P6
MH TN2505
MH TN6525
MH TN6540
M1–M2
––
MM TN6525
MM TN6540
M3
––
MM TN6525
MM TN6540
K1–K2
MH TN2505
MH TN2505
MH TN6525
K3
MH TN2505
MH TN2505
MH TN6525
N1–N2
––
––
––
N3
––
––
––
S1–S2
––
MM TN6540
––
S3
––
MM TN6540
––
S4
––
MM TN6540
––
H1
MH TN2505
MH TN2505
––
RDPX-MM
• -MM geometry is the best option for general-purpose use,
materials, and applications. Used for reduced cutting forces.
rst choice
alternate choice
RDPX-MM
RDPX-MH
catalogue number D S hm
TN2505
TN6525
TN6540
RDPX1604M0SNMH 16,00 4,76 0,22
3960514
3960513
3960462
• -MH geometry is the rst choice for heavy machining.
• Suitable for high-strength steels, cast iron, and hard machining.
RDPX-MH
iC16 • Inserts
catalogue number D S hm
TN2505
TN6525
TN6540
RDPX1604M0SNMM 16,00 4,76 0,14
–
3960516
3960515
P
M
K
N
S
H
WID_Master16_IndexableMIlling_CopyMills_M068_M069_Metric_REBRAND.indd 68 10/29/15 2:17 PM
M69
LViWID M 16 I d bl MIlli C Mill M068 M069 M i REBRANDO b 14201510 20AM
widia.com
Copy Mills • M170™ Series
Recommended Starting Speeds
NOTE: FIRST choice starting speeds are in bold type.
As the average chip thickness increases, the speed should be decreased.
Copy Mills
Recommended Starting Speeds [m/min]
Material
Group TN2505 TN6525 TN6540
P
1
550
420
360 410
320
280 360
280
240
2
320
240
205 320
250
215 250
190
170
3
320
240
205 280
215
185 215
170
140
4
–
–
– 235
170
145 180
130
110
5
–
–
– 310
235
200 240
180
150
6
–
–
– 205
160
130 160
120
100
M
1
–
–
– 190
120
80 130
80
60
2
–
–
– 120
80
50 80
50
40
3
–
–
– 125
80
55 85
50
40
K
1
400
300
250 275
245
220 220
205
180
2
540
365
280 215
190
180 175
155
140
3
310
190
155 180
160
145 155
145
125
N
1
–
–
––
–
––
–
–
2
–
–
––
–
––
–
–
3
–
–
––
–
––
–
–
S
1
–
–
––
–
–50
35
30
2
–
–
––
–
–25
20
10
3
–
–
––
–
–70
40
30
4
–
–
––
–
–60
30
25
H
1
175
140
95 –
–
––
–
–
2
175
140
95 –
–
––
–
–
3
140
115
80 –
–
––
–
–
NOTE: Use “Light Machining” value as starting feed rate.
Recommended Starting Feeds [mm] Light
Machining
General
Purpose
Heavy
Machining
At 2,00 Axial Depth of Cut (ap)
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
MM 0,59
0,79
1,24 0,43
0,57
0,89 0,32
0,42
0,66 0,28
0,37
0,58 0,25
0,34
0,53 MM
MH 0,77
1,06
1,79 0,56
0,76
1,28 0,42
0,57
0,95 0,36
0,50
0,83 0,33
0,45
0,76 MH
At 4,00 Axial Depth of Cut (ap)
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
MM 0,45
0,60
0,94 0,32
0,43
0,68 0,24
0,32
0,51 0,21
0,28
0,44 0,19
0,26
0,40 MM
MH 0,59
0,81
1,36 0,43
0,58
0,97 0,32
0,43
0,72 0,28
0,38
0,63 0,25
0,35
0,58 MH
At 8,00 Axial Depth of Cut (ap)
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
MM 0,39
0,52
0,82 0,28
0,37
0,59 0,21
0,28
0,44 0,18
0,24
0,38 0,17
0,22
0,35 MM
MH 0,51
0,70
1,17 0,37
0,50
0,84 0,28
0,38
0,63 0,24
0,33
0,55 0,22
0,30
0,50 MH
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
MM 0,81
1,08
1,71 0,58
0,78
1,22 0,43
0,58
0,91 0,38
0,51
0,79 0,35
0,46
0,72 MM
MH 1,06
1,46
2,48 0,76
1,04
1,75 0,57
0,78
1,30 0,50
0,68
1,13 0,45
0,62
1,03 MH
At 1,00 Axial Depth of Cut (ap)
Recommended Starting Feeds
WID_Master16_IndexableMIlling_CopyMills_M068_M069_Metric_REBRAND.indd 69 10/29/15 2:17 PM
widia.com
M70
LViWID M 16 I d bl MIlli C Mill M070 M071 M i REBRANDN b 10 20153 33PM
Copy Mills • M170™ Series
Additional Application Advice • RD1604..
1. fz depends on the Ap1 and ae values
2. Ap1 and vc corrections depend on L/D ratio
Example application
highlighted.
Selecting the Correct Cutting Values
Recommended Starting Feed Rate Values (fz) Related to the Ap1 and ae Values:
D
L
D
L
D
L
Cutter
Diameter
Hole
Diameter
With round inserts, two factors can affect the hm: Ap1 and ae.
fz has to be adjustedaccordingly.
With increasing L/D ratios, or overhang, vibrations can occur due to reduced
rigidity. Toensure successful application, it is recommended to adjust Ap1
and vc values according tothe following table:
ae engagement 10% 20% 30% 40% 50% 100%
Ap1 = 1mm 1,52mm 1,07mm 0,88mm 0,76mm 0,68mm 0,48mm
Ap1 = 2mm 1,07mm 0,76mm 0,62mm 0,54mm 0,48mm 0,34mm
Ap1 = 3mm 0,88mm 0,62mm 0,51mm 0,44mm 0,39mm 0,28mm
Ap1 = 4mm 0,76mm 0,54mm 0,44mm 0,38mm 0,34mm 0,24mm
Ap1 = 5mm 0,62mm 0,44mm 0,36mm 0,31mm 0,26mm 0,20mm
Ap1 = 6mm 0,54mm 0,38mm 0,31mm 0,27mm 0,24mm 0,17mm
insert = RDPX1604M0SN
TN2505 TN6525 TN6540
feed per tooth fz (mm)/ae>50%
min med max min med max min med max
Edge Geometry MM ae>50% Recommended starting Ap1 = 3mm – – – 0,28mm 0,45mm 0,65mm 0,28mm 0,50mm 0,70mm
Edge Geometry MH ae>50% Recommended starting Ap1 = 3mm 0,28mm 0,35mm 0,50mm 0,28mm 0,50mm 0,75mm 0,28mm 0,60mm 0,80mm
Example Cutting Conditions for iC16mm... Insert in Pocketing, up to 3 L/D approximately:
L/D ratio
% of Ap1 max
to reduce
% of vc
to reduce
<2 0% 0%
2<L/D<4 65–75% 10–15%
>4 80–95% 20–40%
cutter diameter
min hole
diameter
max hole diameter
(fl at bottom)
Ap1 max per
revolution
max ramp
angle
Ap1 max
when plunging
32 36mm 48mm 3mm 20° 3mm
50 69mm 84mm 8mm 9,5° 4,8mm
52 73mm 88mm 8mm 8,2° 5mm
63 95mm 110mm 8mm 5,5° 4,7mm
66 101mm 120mm 8mm 4° 4,2mm
80 129mm 144mm 8mm 3° 4,1mm
100 169mm 184mm 8mm 2,4° 4,6mm
125 219mm 234mm 8mm 2,2° 4,4mm
Recommended Cutting Conditions • Helical Interpolation from Solid
WID_Master16_IndexableMIlling_CopyMills_M070_M071_Metric_REBRAND.indd 70 11/11/15 9:35 AM
LViWID M 16 I d bl MIlli C Mill M070 M071 M i REBRANDN b 1020153 33PM
Tools Are Valuable. Protect Them and Get
the Most from Your Investment.
WIDIA™ tooling products are produced to the highest specifi cations and manufactured
from premium materials. However, like all mechanical devices, they wear and require repair.
When your WIDIA advanced tooling products need to be serviced, the WIDIA Service
and Repair Department has the highly trained staff to provide expert assistance.
For about half the cost of a new WIDIA tool purchase, some tools can be repaired to
like-new condition. Contact WIDIA today with any questions and to fi nd out if tool repair
is a cost-effective option for you.
For more information, contact your local WIDIA
Authorised Distributor or visit widia.com/services.
Getting Started (and Getting Finished) Is Easy.
REPAIR SERVICES
WID_Master16_IndexableMIlling_CopyMills_M070_M071_Metric_REBRAND.indd 71 11/11/15 9:35 AM
M72
LViWID M 16 I d bl MIlli C Mill M072 M073 M i REBRANDN b 10 20153 34PM
widia.com
Through tool coolant.
Large area for
chip evacuation.
Thick inserts for reliability and higher MRR
capabilities with anti-rotation system in the
larger iC inserts.
Strong and rigid tool
body design for the most
demanding operations.
• Thick inserts ensure reliability and consistent results.
• Anti-rotation systems in larger iC inserts provide higher MRR capabilities.
• Increased chip evacuation and through tool coolant for enhanced performance.
M100
A trusted multipurpose solution for profi ling and copy applications, the M100
Series ensures a reliable platform for all of your copy milling, face milling, helical
interpolation, and roughing needs. The strong and rigid body design ensures
superior results in even the most demanding operations.
Versatile Platform for All Materials and Applications •
M100™ Series Copy Mills
WID_Master16_IndexableMIlling_CopyMills_M072_M073_Metric_REBRAND.indd 72 11/11/15 9:35 AM
M73
LViWID M 16 I d bl MIlli C Mill M072 M073 M i REBRANDN b 1020153 34PM
widia.com
Copy Mills M100™
Max depth of cut: 6mm
Diameter: 24–125mm
Pages: M74–M99
P
M
K
S
H
Insert Offering
08mm iC
RD Insert Type
Ground and PSTS
10mm iC
RD Insert Type
Ground and PSTS
12mm iC
RD Insert Type
Anti-rotation Feature
Ground and PSTS
16mm iC
RD Insert Type
Anti-rotation Feature
Ground and PSTS
16mm iC
RC Insert Type
Anti-rotation Feature
Ground and PSTS
WID_Master16_IndexableMIlling_CopyMills_M072_M073_Metric_REBRAND.indd 73 11/11/15 9:35 AM
M74
LViWID M 16 I d bl MIlli C Mill M074 M075 M i REBRANDO b 14 201510 22AM
widia.com
Copy Mills • M100™ Series
Weldon® Shanks • RD0802..
D1 max
insert
screw Nm
Torx
driver
12 12148001300 3,0 12148086600
16 12148001300 3,0 12148086600
Spare Parts
Weldon Shanks
order number catalogue number D1 max D1 D L L2 Ap1 max Z
max
ramp
angle max RPM
coolant
supply kg
2021331 12391010000 12 4 16 90 42 4,0 1 2.0° 33000 Yes 0,10
2021332 12391010400 12 4 16 130 82 4,0 1 2.0° 33000 Yes 0,10
2021333 12391010600 16 8 16 90 42 4,0 2 7.5° 28000 Yes 0,10
2021334 12391011000 16 8 20 132 82 4,0 2 7.5° 28000 Yes 0,20
2021335 12391011400 16 8 25 183 127 4,0 2 7.5° 28000 Yes 0,40
Copy Mills
• General purpose face and copy milling.
NOTE: All spare parts except the insert screws must be ordered separately.
WID_Master16_IndexableMIlling_CopyMills_M074_M075_Metric_REBRAND.indd 74 10/29/15 2:17 PM
M75
LViWID M 16 I d bl MIlli C Mill M074 M075 M i REBRANDO b 14201510 22AM
widia.com
Copy Mills • M100™ Series
Inserts
Copy Mills
Insert Selection Guide
Material
Group
Light
Machining
General
Purpose
Heavy
Machining
Geometry Grade Geometry Grade Geometry Grade
P1–P2
RDMT-T TN7525
RDMT-T TN7525
RDMT-T TN7535
P3–P4
RDMT-T TN7525
RDMW-T TN6540
RDMW-T TN6540
P5–P6
RDMT-T TN7525
RDMT-T TN7535
RDMT-T TN7535
M1–M2
RDHT-T TN7525
RDHT-T TN7525
RDMT-T TN7535
M3
RDHT-T TN7525
RDHT-T TN7525
RDMT-T TN7535
K1–K2
––
RDMW-T TN7535
RDMW-T TN7535
K3
––
RDMW-T TN7535
RDMW-T TN7535
N1–N2
––
––
––
N3
––
––
––
S1–S2
––
––
––
S3
––
––
––
S4
––
––
––
H1
––
––
––
• Precision pressed insert; positive geometry for lower cutting forces.
• First choice for general machining, stainless steel, and high-temp alloys
in roughing operations.
• Precision ground insert; rst choice for light machining.
rst choice
alternate choice
RDMT-T
RDMT-T
catalogue number D S hm
TN2510
TN6540
TN7525
TN7535
RDMT0802M0T 8,00 2,38 0,09
–
–
2012518
2020757
RDHT-T
iC08 • Inserts
RDHT-T
catalogue number D S hm
TN2510
TN6540
TN7525
TN7535
RDHT0802M0T 8,00 2,38 0,09
–
–
2012426
–
P
M
K
N
S
H
WID_Master16_IndexableMIlling_CopyMills_M074_M075_Metric_REBRAND.indd 75 10/29/15 2:17 PM
M76
LViWID M 16 I d bl MIlli C Mill M076 M077 M i REBRANDO b 14 201510 22AM
widia.com
Copy Mills • M100™ Series
P
M
K
N
S
H
iC08 • Inserts
RDMW/-T
catalogue number D S hm
TN2510
TN6540
TN7525
TN7535
RDMW0802M0 8,00 2,38 0,09
2012564
–
–
–
RDMW0802M0T 8,00 2,38 0,09
–
3353278
–
2020727
Copy Mills
• Precision pressed insert.
• First choice for roughing operations,
especially for steel and cast iron.
rst choice
alternate choice
RDMW/-T
NOTE: FIRST choice starting speeds are in bold type.
As the average chip thickness increases, the speed should be decreased.
Recommended Starting Speeds [m/min]
Material
Group TN2510 TN6540 TN7525 TN7535
P
1
660
580
540 360
280
240 410
310
280 545
475
445
2
410
370
330 250
190
170 310
250
215 335
305
275
3
370
330
305 215
170
140 280
215
185 305
275
245
4
275
260
230 180
130
110 235
170
145 230
210
190
5
330
300
275 240
180
150 310
235
200 310
275
250
6
230
205
175 160
120
100 205
160
130 190
160
130
M
1
270
240
210 130
80
60 245
220
185 245
220
185
2
245
210
190 80
50
40 220
190
170 220
190
170
3
190
175
150 85
50
40 175
155
140 175
155
140
K
1
420
360
300 220
205
180 380
280
240 355
320
290
2
360
300
250 175
155
140 325
240
200 280
250
230
3
300
250
200 155
145
125 240
200
170 235
210
190
N
1
–
–
––
–
––
–
––
–
–
2
–
–
––
–
––
–
––
–
–
3
–
–
––
–
––
–
––
–
–
S
1
–
–
–50
35
30 –
–
––
–
–
2
–
–
–25
20
10 –
–
––
–
–
3
–
–
–70
40
30 –
–
––
–
–
4
–
–
–60
30
25 –
–
––
–
–
H
1
145
110
70 –
–
––
–
––
–
–
2
145
110
70 –
–
––
–
––
–
–
3
115
80
45 –
–
––
–
––
–
–
Recommended Starting Speeds
WID_Master16_IndexableMIlling_CopyMills_M076_M077_Metric_REBRAND.indd 76 10/29/15 2:17 PM
M77
LViWID M 16 I d bl MIlli C Mill M076 M077 M i REBRANDO b 14201510 22AM
widia.com
Copy Mills • M100™ Series
Recommended Starting Feeds
NOTE: Use “Light Machining” value as starting feed rate.
Copy Mills
Recommended Starting Feeds [mm]
At 4,00 Axial Depth of Cut (ap)
At 2,00 Axial Depth of Cut (ap)
At 1,00 Axial Depth of Cut (ap)
Light
Machining
General
Purpose
Heavy
Machining
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
RDMW- 0,28
0,44
0,63 0,20
0,32
0,46 0,15
0,24
0,34 0,13
0,21
0,30 0,12
0,19
0,27 RDMW-
RDHT-T 0,35
0,47
0,95 0,25
0,34
0,69 0,19
0,26
0,51 0,17
0,22
0,45 0,15
0,20
0,41 RDHT-T
RDMT-T 0,35
0,47
0,95 0,25
0,34
0,69 0,19
0,26
0,51 0,17
0,22
0,45 0,15
0,20
0,41 RDMT-T
RDMW-T 0,35
0,63
1,12 0,25
0,46
0,80 0,19
0,34
0,60 0,17
0,30
0,52 0,15
0,27
0,48 RDMW-T
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
RDMW- 0,39
0,60
0,87 0,28
0,44
0,62 0,21
0,33
0,47 0,18
0,28
0,41 0,17
0,26
0,37 RDMW-
RDHT-T 0,48
0,65
1,31 0,35
0,47
0,94 0,26
0,35
0,70 0,23
0,30
0,61 0,21
0,28
0,56 RDHT-T
RDMT-T 0,48
0,65
1,31 0,35
0,47
0,94 0,26
0,35
0,70 0,23
0,30
0,61 0,21
0,28
0,56 RDMT-T
RDMW-T 0,48
0,87
1,54 0,35
0,62
1,10 0,26
0,47
0,82 0,23
0,41
0,71 0,21
0,37
0,65 RDMW-T
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
RDMW- 0,22
0,34
0,48 0,16
0,24
0,35 0,12
0,18
0,26 0,10
0,16
0,23 0,09
0,15
0,21 RDMW-
RDHT-T 0,27
0,36
0,72 0,19
0,26
0,52 0,14
0,20
0,39 0,13
0,17
0,34 0,12
0,16
0,31 RDHT-T
RDMT-T 0,27
0,36
0,72 0,19
0,26
0,52 0,14
0,20
0,39 0,13
0,17
0,34 0,12
0,16
0,31 RDMT-T
RDMW-T 0,27
0,48
0,85 0,19
0,35
0,61 0,14
0,26
0,46 0,13
0,23
0,40 0,12
0,21
0,36 RDMW-T
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
RDMW- 0,19
0,29
0,42 0,14
0,21
0,30 0,10
0,16
0,23 0,09
0,14
0,20 0,08
0,13
0,18 RDMW-
RDHT-T 0,23
0,31
0,63 0,17
0,23
0,45 0,13
0,17
0,34 0,11
0,15
0,29 0,10
0,14
0,27 RDHT-T
RDMT-T 0,23
0,31
0,63 0,17
0,23
0,45 0,13
0,17
0,34 0,11
0,15
0,29 0,10
0,14
0,27 RDMT-T
RDMW-T 0,23
0,42
0,73 0,17
0,30
0,53 0,13
0,23
0,39 0,11
0,20
0,34 0,10
0,18
0,32 RDMW-T
At 0,50 Axial Depth of Cut (ap)
WID_Master16_IndexableMIlling_CopyMills_M076_M077_Metric_REBRAND.indd 77 10/29/15 2:17 PM
M78
LViWID M 16 I d bl MIlli C Mill M078 M079 M i REBRANDO b 14 201510 22AM
widia.com
Copy Mills • M100™ Series
Screw-On End Mills • RD1003..
Spare Parts
Screw-On End Mills
order number catalogue number D1 max D1 D DPM G3X L L2 WF Ap1 max Z
max
ramp
angle max RPM
coolant
supply kg
2021375 12391050400 25 15 22 12,5 M12 52 30 19 5,0 2 15.8° 22000 Yes 0,10
2021376 12391050600 30 20 28 17,0 M16 63 40 22 5,0 3 10.3° 20000 Yes 0,20
• General purpose face and copy milling.
insert
screw Nm
Torx
wrench
12148036700 3,0 12148000600
Copy Mills
NOTE: All spare parts except the insert screws must be ordered separately.
WID_Master16_IndexableMIlling_CopyMills_M078_M079_Metric_REBRAND.indd 78 10/29/15 2:17 PM
M79
LViWID M 16 I d bl MIlli C Mill M078 M079 M i REBRANDO b 14201510 22AM
widia.com
Copy Mills • M100™ Series
Weldon® Shanks • RD1003..
insert
screw Nm
Torx
driver
12148036700 3,0 12148000600
Spare Parts
Weldon Shanks
order number catalogue number D1 max D1 D L L2 Ap1 max Z
max
ramp
angle max RPM
coolant
supply kg
2021336 12391011600 20 10 20 92 42 5,0 2 7.8° 25000 Yes 0,20
2021337 12391012000 20 10 25 138 82 5,0 2 8.8° 25000 Yes 0,40
2021338 12391012400 20 10 25 183 127 5,0 2 7.5° 25000 Yes 0,50
2021339 12391012800 26 16 32 142 82 5,0 2 13.5° 22000 Yes 0,60
2021340 12391013200 26 16 32 187 127 5,0 2 14.3° 22000 Yes 0,90
Copy Mills
• General purpose face and copy milling.
NOTE: All spare parts except the insert screws must be ordered separately.
WID_Master16_IndexableMIlling_CopyMills_M078_M079_Metric_REBRAND.indd 79 10/29/15 2:17 PM
M80
LViWID M 16 I d bl MIlli C Mill M080 M081 M i REBRANDO b 14 201510 22AM
widia.com
Copy Mills • M100™ Series
Inserts
Copy Mills
Insert Selection Guide
Material
Group
Light
Machining
General
Purpose
Heavy
Machining
Geometry Grade Geometry Grade Geometry Grade
P1–P2
RDMT-T TN6525
RDMT-T TN6540
RDMT-T TN6540
P3–P4
RDMT-T TN6525
RDMW-T TN6540
RDMW-T TN6540
P5–P6
RDMT-T TN7525
RDMT-T TN7535
RDMW-T TN7535
M1–M2
RDHT-T TN7525
RDHT-T TN7525
RDMT-T TN6540
M3
RDHT-T TN7525
RDMT-T TN6540
RDMT-T TN6540
K1–K2
RDHW-MH TN2510
RDHW-MH TN2510
RDMW-T TN7535
K3
RDHW-MH TN2510
RDHW-MH TN2510
RDMW-T TN7535
N1–N2
––
––
––
N3
––
––
––
S1–S2
––
RDMT-T TN6540
––
S3
––
RDMT-T TN6540
––
S4
––
RDMT-T TN6540
RDMT-T TN6540
H1
RDHW-MH TN2510
RDHW-MH TN2510
––
P
M
K
N
S
H
RDHT-T
catalogue number D S hm
TN2510
TN6525
TN6540
TN7525
TN7535
TTI25
RDHT1003M0T 10,00 3,18 0,14
–
–
–
2012446
–
–
• Precision ground insert; rst choice for light machining.
rst choice
alternate choice
RDHT-T
iC10 • Inserts
RDHW-MH
catalogue number D S hm
TN2510
TN6525
TN6540
TN7525
TN7535
TTI25
RDHW1003M0MH 10,00 3,18 0,14
2012480
–
–
–
–
–
• Precision ground at top geometry.
RDHW-MH
WID_Master16_IndexableMIlling_CopyMills_M080_M081_Metric_REBRAND.indd 80 10/29/15 2:17 PM
M81
LViWID M 16 I d bl MIlli C Mill M080 M081 M i REBRANDO b 14201510 22AM
widia.com
Copy Mills
Copy Mills • M100™ Series
P
M
K
N
S
H
iC10 • Inserts
RDMT-T
catalogue number D S hm
TN2510
TN6525
TN6540
TN7525
TN7535
TTI25
RDMT1003M0T 10,00 3,18 0,14
–
2957429
2957428
2012534
2276618
–
• Precision pressed insert; positive geometry for lower cutting forces.
• First choice for general machining, stainless steel, and high-temp alloys
in roughing operations.
rst choice
alternate choice
RDMT-T
RDMW/-T
catalogue number D S hm
TN2510
TN6525
TN6540
TN7525
TN7535
TTI25
RDMW1003M0 10,00 3,18 0,09
2012572
–
–
–
–
–
RDMW1003M0T 10,00 3,18 0,14
–
–
3353279
2109381
2020735
2012578
• Precision pressed insert with at top geometry.
• First choice for cast iron and high-strength steel.
RDMW/-T
WID_Master16_IndexableMIlling_CopyMills_M080_M081_Metric_REBRAND.indd 81 10/29/15 2:17 PM
M82
LViWID M 16 I d bl MIlli C Mill M082 M083 M i REBRANDO b 14 201510 23AM
widia.com
Copy Mills • M100™ Series
Recommended Starting Speeds
NOTE: FIRST choice starting speeds are in bold type.
As the average chip thickness increases, the speed should be decreased.
Copy Mills
Recommended Starting Speeds [m/min]
Material
Group TN2510 TN6525 TN6540 TN7525 TN7535 TTI25
P
1
660
580
540 410
320
280 360
280
240 410
310
280 545
475
445 430
360
300
2
410
370
330 320
250
215 250
190
170 310
250
215 335
305
275 310
250
215
3
370
330
305 280
215
185 215
170
140 280
215
185 305
275
245 310
250
215
4
275
260
230 235
170
145 180
130
110 235
170
145 230
210
190 265
215
180
5
330
300
275 310
235
200 240
180
150 310
235
200 310
275
250 320
235
200
6
230
205
175 205
160
130 160
120
100 205
160
130 190
160
130 145
110
90
M
1
270
240
210 190
120
80 130
80
60 245
220
185 245
220
185 480
310
215
2
245
210
190 120
80
50 80
50
40 220
190
170 220
190
170 325
205
145
3
190
175
150 125
80
55 85
50
40 175
155
140 175
155
140 320
210
145
K
1
420
360
300 275
245
220 220
205
180 380
280
240 355
320
290 220
185
155
2
360
300
250 215
190
180 175
155
140 325
240
200 280
250
230 180
145
125
3
300
250
200 180
160
145 155
145
125 240
200
170 235
210
190 145
125
100
N
1
–
–
––
–
––
–
––
–
––
–
––
–
–
2
–
–
––
–
––
–
––
–
––
–
––
–
–
3
–
–
––
–
––
–
––
–
––
–
––
–
–
S
1
–
–
––
–
–50
35
30 –
–
––
–
––
–
–
2
–
–
––
–
–25
20
10 –
–
––
–
––
–
–
3
–
–
––
–
–70
40
30 –
–
––
–
––
–
–
4
–
–
––
–
–60
30
25 –
–
––
–
––
–
–
H
1
145
110
70 –
–
––
–
––
–
––
–
––
–
–
2
145
110
70 –
–
––
–
––
–
––
–
––
–
–
3
115
80
45 –
–
––
–
––
–
––
–
––
–
–
WID_Master16_IndexableMIlling_CopyMills_M082_M083_Metric_REBRAND.indd 82 10/29/15 2:17 PM
M83
LViWID M 16 I d bl MIlli C Mill M082 M083 M i REBRANDO b 14201510 23AM
widia.com
Copy Mills • M100™ Series
Recommended Starting Feeds
NOTE: Use “Light Machining” value as starting feed rate.
Copy Mills
Recommended Starting Feeds [mm]
At 5,00 Axial Depth of Cut (ap)
At 2,00 Axial Depth of Cut (ap)
At 1,00 Axial Depth of Cut (ap)
Light
Machining
General
Purpose
Heavy
Machining
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
RDHT-T 0,39
0,65
1,09 0,28
0,47
0,78 0,21
0,35
0,58 0,18
0,31
0,51 0,17
0,28
0,47 RDHT-T
RDHW-MH 0,39
0,71
1,49 0,28
0,51
1,06 0,21
0,38
0,79 0,18
0,33
0,69 0,17
0,30
0,63 RDHW-MH
RDMT-T 0,39
0,65
1,09 0,28
0,47
0,78 0,21
0,35
0,58 0,18
0,31
0,51 0,17
0,28
0,47 RDMT-T
RDMW 0,39
0,35
1,02 0,28
0,25
0,73 0,21
0,19
0,55 0,18
0,16
0,48 0,17
0,15
0,44 RDMW
RDMW-T 0,39
0,95
1,49 0,28
0,69
1,06 0,21
0,51
0,79 0,18
0,45
0,69 0,17
0,41
0,63 RDMW-T
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
RDHT-T 0,53
0,90
1,52 0,38
0,65
1,08 0,29
0,48
0,81 0,25
0,42
0,70 0,23
0,39
0,64 RDHT-T
RDHW-MH 0,53
0,98
2,07 0,38
0,70
1,47 0,29
0,52
1,09 0,25
0,46
0,95 0,23
0,42
0,87 RDHW-MH
RDMT-T 0,53
0,90
1,52 0,38
0,65
1,08 0,29
0,48
0,81 0,25
0,42
0,70 0,23
0,39
0,64 RDMT-T
RDMW 0,53
0,48
1,41 0,38
0,35
1,01 0,29
0,26
0,75 0,25
0,23
0,65 0,23
0,21
0,60 RDMW
RDMW-T 0,53
1,32
2,07 0,38
0,95
1,47 0,29
0,70
1,09 0,25
0,61
0,95 0,23
0,56
0,87 RDMW-T
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
RDHT-T 0,29
0,49
0,82 0,21
0,35
0,59 0,16
0,26
0,44 0,14
0,23
0,38 0,13
0,21
0,35 RDHT-T
RDHW-MH 0,29
0,53
1,11 0,21
0,38
0,79 0,16
0,28
0,59 0,14
0,25
0,52 0,13
0,23
0,47 RDHW-MH
RDMT-T 0,29
0,49
0,82 0,21
0,35
0,59 0,16
0,26
0,44 0,14
0,23
0,38 0,13
0,21
0,35 RDMT-T
RDMW 0,29
0,26
0,76 0,21
0,19
0,55 0,16
0,14
0,41 0,14
0,12
0,36 0,13
0,11
0,33 RDMW
RDMW-T 0,29
0,71
1,11 0,21
0,51
0,79 0,16
0,38
0,59 0,14
0,33
0,52 0,13
0,31
0,47 RDMW-T
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
RDHT-T 0,23
0,39
0,65 0,17
0,28
0,47 0,13
0,21
0,35 0,11
0,18
0,31 0,10
0,17
0,28 RDHT-T
RDHW-MH 0,23
0,42
0,88 0,17
0,30
0,63 0,13
0,23
0,47 0,11
0,20
0,41 0,10
0,18
0,38 RDHW-MH
RDMT-T 0,23
0,39
0,65 0,17
0,28
0,47 0,13
0,21
0,35 0,11
0,18
0,31 0,10
0,17
0,28 RDMT-T
RDMW 0,23
0,21
0,61 0,17
0,15
0,44 0,13
0,11
0,33 0,11
0,10
0,28 0,10
0,09
0,26 RDMW
RDMW-T 0,23
0,57
0,88 0,17
0,41
0,63 0,13
0,31
0,47 0,11
0,27
0,41 0,10
0,25
0,38 RDMW-T
At 0,50 Axial Depth of Cut (ap)
WID_Master16_IndexableMIlling_CopyMills_M082_M083_Metric_REBRAND.indd 83 10/29/15 2:17 PM
M84
LViWID M 16 I d bl MIlli C Mill M084 M085 M i REBRANDO b 14 201510 23AM
widia.com
Copy Mills • M100™ Series
iC12 • Screw-On End Mills
Spare Parts
Screw-On End Mills
order number catalogue number D1 max D1 D DPM G3X L L2 WF Ap1 max Z
max
ramp
angle max RPM
coolant
supply kg
2021374 12391050200 24 12 22 12,5 M12 52 30 19 6,0 2 10.0° 23000 Yes 0,10
2021378 12391051000 35 23 28 17,0 M16 63 40 22 6,0 3 10.8° 19000 Yes 0,20
2021379 12391051200 40 28 28 17,0 M16 63 40 22 6,0 4 8.3° 17000 Yes 0,30
• General purpose face and copy milling.
• Anti-rotation feature for top security.
D1 max
insert
screw Nm
Torx
wrench
24 12148038800 3,0 12148000600
35 12148038800 3,0 12148000600
40 12148038800 3,0 12148000600
Copy Mills
NOTE: All spare parts except the insert screws must be ordered separately.
WID_Master16_IndexableMIlling_CopyMills_M084_M085_Metric_REBRAND.indd 84 10/29/15 2:17 PM
M85
LViWID M 16 I d bl MIlli C Mill M084 M085 M i REBRANDO b 14201510 23AM
widia.com
Copy Mills • M100™ Series
iC12 • Shell Mills
D1 max
insert
screw Nm
Torx
driver
socket-head
cap screw
socket-head cap screw
with coolant groove
50 12148038800 3,0 12148000600 125.025 MS1234CG
52 12148038800 3,0 12148000600 125.025 MS1234CG
63 12148038800 3,0 12148000600 125.230 MS2038CG
80 12148038800 3,0 12148000600 125.230 MS2038CG
100 12148038800 3,0 12148000600 — —
125 12148038800 3,0 12148000600 — —
Spare Parts
Shell Mills
order number catalogue number D1 max D1 D D6 L Ap1 max Z
max
ramp
angle max RPM
coolant
supply kg
2021342 12391020000 50 38 22 40 40 6,0 4 6.8° 15000 Yes 0,20
2021361 12391024000 52 40 22 40 40 6,0 4 6.5° 15000 Yes 0,20
2021343 12391020200 63 51 27 48 40 6,0 5 4.5° 14000 Yes 0,30
2021344 12391020400 80 68 27 60 50 6,0 6 3.5° 12000 Yes 0,90
2021345 12391020600 100 88 32 78 50 6,0 6 2.5° 11000 No 1,20
2021346 12391020800 125 113 40 89 50 6,0 7 2.0° 10000 No 1,70
Copy Mills
• General purpose face and copy milling.
• Anti-rotation feature for top security.
NOTE: All spare parts except the insert screws must be ordered separately.
WID_Master16_IndexableMIlling_CopyMills_M084_M085_Metric_REBRAND.indd 85 10/29/15 2:17 PM
M86
LViWID M 16 I d bl MIlli C Mill M086 M087 M i REBRANDO b 14 201510 23AM
widia.com
Copy Mills • M100™ Series
Inserts
Copy Mills
Insert Selection Guide
Material
Group
Light
Machining
General
Purpose
Heavy
Machining
Geometry Grade Geometry Grade Geometry Grade
P1–P2
RDMT-TX TN7525
RDMT-TX TN6540
RDMT-TX TN6540
P3–P4
RDMT-TX TN7525
RDMW-TX TN6540
RDMW-TX TN6540
P5–P6
RDMT-TX TN7525
RDPT-MMX TN7535
RDPT-MMX TN7535
M1–M2
RDHT-TX TN7525
RDMT-TX TN6540
RDPT-MMX TN6540
M3
RDHT-TX TN7525
RDMT-TX TN6540
RDPT-MMX TN6540
K1–K2
RDMW-TX WK15CM
RDMW-TX WK15CM
RDMW-TX TN7535
K3
RDHW-MH TN2510
RDMW-TX WK15CM
RDMW-TX WK15CM
N1–N2
––
––
––
N3
––
––
––
S1–S2
––
RDMT-TX TN6540
––
S3
––
RDMT-TX TN6540
––
S4
––
RDMT-TX TN6540
RDPT-MMX TN6540
H1
RDHW-MH TN2510
RDHW-MH TN2510
––
• Precision ground positive geometry for lower cutting forces.
• First choice for general machining, stainless steel,
and high-temp alloys.
rst choice
alternate choice
RDHT-TX
RDHT-TX
catalogue number
number
of indexes D S hm
TN2510
TN6525
TN6540
TN7525
TN7535
WK15CM
WS30PM
RDHT1204M0TX 6 12,00 4,76 0,12
–
–
–
2020775
–
–
–
RDHW-MH
catalogue number
number
of indexes D S hm
TN2510
TN6525
TN6540
TN7525
TN7535
WK15CM
WS30PM
RDHW1204M0MH 6 12,00 4,76 0,14
2012484
–
–
–
–
–
–
RDHW-MH
• Precision ground at top insert.
• Alternative choice for stable milling operations
in high-strength steel and hardened materials.
iC12 • Inserts
P
M
K
N
S
H
WID_Master16_IndexableMIlling_CopyMills_M086_M087_Metric_REBRAND.indd 86 10/29/15 2:17 PM
M87
LViWID M 16 I d bl MIlli C Mill M086 M087 M i REBRANDO b 14201510 23AM
widia.com
Copy Mills • M100™ Series
iC12 • Inserts
RDPT-MMX
catalogue number
number
of indexes D S hm
TN2510
TN6525
TN6540
TN7525
TN7535
WK15CM
WS30PM
RDPT1204M0SMMX 6 12,00 4,76 0,18
–
–
5176974
–
5176975
–
–
Copy Mills
• Precision pressed insert.
• Improved performance in stainless steel and
high-temp alloys.
rst choice
alternate choice
RDPT-MMX
RDMT-TX
catalogue number
number
of indexes D S hm
TN2510
TN6525
TN6540
TN7525
TN7535
WK15CM
WS30PM
RDMT1204M0TX 6 12,00 4,76 0,15
2109552
2957430
2957432
2020763
2109542
–
5520247
• Precision pressed positive geometry
for lower cutting forces.
• First choice for general machining, stainless steel,
and high-temp alloys in roughing operations.
RDMT-TX
RDMW-TX
catalogue number
number
of indexes D S hm
TN2510
TN6525
TN6540
TN7525
TN7535
WK15CM
WS30PM
RDMW1204M0TX 6 12,00 4,76 0,15
2012594
–
3353281
2109440
2020741
5427441
–
• Precision pressed insert.
• First choice for roughing operations,
especially for steel and cast iron.
RDMW-TX
P
M
K
N
S
H
WID_Master16_IndexableMIlling_CopyMills_M086_M087_Metric_REBRAND.indd 87 10/29/15 2:17 PM
M88
LViWID M 16 I d bl MIlli C Mill M088 M089 M i REBRANDO b 14 201510 23AM
widia.com
Copy Mills • M100™ Series
Recommended Starting Speeds
Recommended Starting Speeds [m/min]
Material
Group TN2510 TN6525 TN6540 TN7525
P
1
660
580
540 410
320
280 360
280
240 410
310
280
2
410
370
330 320
250
215 250
190
170 310
250
215
3
370
330
305 280
215
185 215
170
140 280
215
185
4
275
260
230 235
170
145 180
130
110 235
170
145
5
330
300
275 310
235
200 240
180
150 310
235
200
6
230
205
175 205
160
130 160
120
100 205
160
130
M
1
270
240
210 190
120
80 130
80
60 245
220
185
2
245
210
190 120
80
50 80
50
40 220
190
170
3
190
175
150 125
80
55 85
50
40 175
155
140
K
1
420
360
300 275
245
220 220
205
180 380
280
240
2
360
300
250 215
190
180 175
155
140 325
240
200
3
300
250
200 180
160
145 155
145
125 240
200
170
N
1
–
–
––
–
––
–
––
–
–
2
–
–
––
–
––
–
––
–
–
3
–
–
––
–
––
–
––
–
–
S
1
–
–
––
–
–50
35
30 –
–
–
2
–
–
––
–
–25
20
10 –
–
–
3
–
–
––
–
–70
40
30 –
–
–
4
–
–
––
–
–60
30
25 –
–
–
H
1
145
110
70 –
–
––
–
––
–
–
2
145
110
70 –
–
––
–
––
–
–
3
115
80
45 –
–
––
–
––
–
–
NOTE: FIRST choice starting speeds are in bold type.
As the average chip thickness increases, the speed should be decreased.
Material
Group TN7535 WK15CM WS30PM TTI25
P
1
545
475
445 –
–
––
–
– 430
360
300
2
335
305
275 –
–
––
–
– 310
250
215
3
305
275
245 –
–
––
–
– 310
250
215
4
230
210
190 –
–
––
–
– 265
215
180
5
310
275
250 –
–
––
–
– 320
235
200
6
190
160
130 –
–
––
–
– 145
110
90
M
1
245
220
185 –
–
– 270
240
220 480
310
215
2
220
190
170 –
–
– 245
215
175 325
205
145
3
175
155
140 –
–
– 185
160
125 320
210
145
K
1
355
320
290 505
460
410 –
–
– 220
185
155
2
280
250
230 400
355
330 –
–
– 180
145
125
3
235
210
190 335
300
275 –
–
– 145
125
100
N
1
–
–
––
–
––
–
––
–
–
2
–
–
––
–
––
–
––
–
–
3
–
–
––
–
––
–
––
–
–
S
1
–
–
––
–
–55
50
35 –
–
–
2
–
–
––
–
–55
50
35 –
–
–
3
–
–
––
–
–65
55
35 –
–
–
4
–
–
––
–
– 100
70
50 –
–
–
H
1
–
–
––
–
––
–
––
–
–
2
–
–
––
–
––
–
––
–
–
3
–
–
––
–
––
–
––
–
–
Copy Mills
WID_Master16_IndexableMIlling_CopyMills_M088_M089_Metric_REBRAND.indd 88 10/29/15 2:17 PM
M89
LViWID M 16 I d bl MIlli C Mill M088 M089 M i REBRANDO b 14201510 23AM
widia.com
Copy Mills • M100™ Series
Recommended Starting Feeds
NOTE: Use “Light Machining” value as starting feed rate.
Copy Mills
Recommended Starting Feeds [mm]
At 6,00 Axial Depth of Cut (ap)
At 3,00 Axial Depth of Cut (ap)
At 1,50 Axial Depth of Cut (ap)
Light
Machining
General
Purpose
Heavy
Machining
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
RDHT-TX 0,53
0,50
0,85 0,38
0,36
0,61 0,28
0,27
0,45 0,25
0,24
0,40 0,23
0,22
0,36 RDHT-TX
RDMT-TX 0,53
0,63
1,06 0,38
0,46
0,76 0,28
0,34
0,57 0,25
0,30
0,50 0,23
0,27
0,45 RDMT-TX
RDPT-MMX 0,53
0,87
1,42 0,38
0,63
1,01 0,28
0,47
0,76 0,25
0,41
0,66 0,23
0,37
0,60 RDPT-MMX
RDHW-MH 0,53
1,06
1,65 0,38
0,76
1,18 0,28
0,57
0,88 0,25
0,50
0,76 0,23
0,45
0,70 RDHW-MH
RDMW-TX 0,53
1,06
1,78 0,38
0,76
1,26 0,28
0,57
0,94 0,25
0,50
0,82 0,23
0,45
0,75 RDMW-TX
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
RDHT-TX 0,72
0,69
1,16 0,52
0,50
0,83 0,39
0,37
0,62 0,34
0,32
0,54 0,31
0,30
0,50 RDHT-TX
RDMT-TX 0,72
0,87
1,46 0,52
0,62
1,04 0,39
0,47
0,78 0,34
0,41
0,68 0,31
0,37
0,62 RDMT-TX
RDPT-MMX 0,72
1,20
1,96 0,52
0,86
1,39 0,39
0,64
1,03 0,34
0,56
0,90 0,31
0,51
0,82 RDPT-MMX
RDHW-MH 0,72
1,46
2,29 0,52
1,04
1,62 0,39
0,78
1,20 0,34
0,68
1,04 0,31
0,62
0,95 RDHW-MH
RDMW-TX 0,72
1,46
2,46 0,52
1,04
1,74 0,39
0,78
1,29 0,34
0,68
1,12 0,31
0,62
1,02 RDMW-TX
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
RDHT-TX 0,40
0,38
0,64 0,29
0,28
0,46 0,22
0,21
0,35 0,19
0,18
0,30 0,17
0,17
0,28 RDHT-TX
RDMT-TX 0,40
0,48
0,81 0,29
0,35
0,58 0,22
0,26
0,43 0,19
0,23
0,38 0,17
0,21
0,35 RDMT-TX
RDPT-MMX 0,40
0,66
1,08 0,29
0,48
0,77 0,22
0,36
0,58 0,19
0,31
0,50 0,17
0,29
0,46 RDPT-MMX
RDHW-MH 0,40
0,81
1,25 0,29
0,58
0,90 0,22
0,43
0,67 0,19
0,38
0,58 0,17
0,35
0,53 RDHW-MH
RDMW-TX 0,40
0,81
1,34 0,29
0,58
0,96 0,22
0,43
0,72 0,19
0,38
0,62 0,17
0,35
0,57 RDMW-TX
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
RDHT-TX 0,35
0,33
0,56 0,25
0,24
0,40 0,19
0,18
0,30 0,16
0,16
0,26 0,15
0,14
0,24 RDHT-TX
RDMT-TX 0,35
0,42
0,70 0,25
0,30
0,50 0,19
0,23
0,38 0,16
0,20
0,33 0,15
0,18
0,30 RDMT-TX
RDPT-MMX 0,35
0,57
0,93 0,25
0,41
0,67 0,19
0,31
0,50 0,16
0,27
0,43 0,15
0,25
0,40 RDPT-MMX
RDHW-MH 0,35
0,70
1,08 0,25
0,50
0,78 0,19
0,38
0,58 0,16
0,33
0,50 0,15
0,30
0,46 RDHW-MH
RDMW-TX 0,35
0,70
1,16 0,25
0,50
0,83 0,19
0,38
0,62 0,16
0,33
0,54 0,15
0,30
0,50 RDMW-TX
At 0,75 Axial Depth of Cut (ap)
WID_Master16_IndexableMIlling_CopyMills_M088_M089_Metric_REBRAND.indd 89 10/29/15 2:17 PM
M90
LViWID M 16 I d bl MIlli C Mill M090 M091 M i REBRANDO b 14 201510 24AM
widia.com
Copy Mills • M100™ Series
Weldon® Shanks • RD1605..
Spare Parts
Weldon Shanks
order number catalogue number D1 max D1 D L L2 Ap1 max Z
max
ramp
angle max RPM
coolant
supply kg
2021341 12391013800 32 16 32 142 82 8,0 2 7.8° 19000 Yes 1,10
• General purpose face and copy milling.
• Anti-rotation feature for top security.
D1 max
insert
screw Nm
Torx
driver
32 12148007200 4,0 12148007500
Copy Mills
NOTE: All spare parts except the insert screws must be ordered separately.
WID_Master16_IndexableMIlling_CopyMills_M090_M091_Metric_REBRAND.indd 90 10/29/15 2:17 PM
M91
LViWID M 16 I d bl MIlli C Mill M090 M091 M i REBRANDO b 14201510 24AM
widia.com
Copy Mills • M100™ Series
Shell Mills • RD1605..
D1 max
insert
screw Nm
Torx
driver
socket-head
cap screw
socket-head cap screw
with coolant groove
50 12148007200 4,0 12148007500 125.025 MS1234CG
63 12148007200 4,0 12148007500 125.230 MS2038CG
80 12148007200 4,0 12148007500 125.230 MS2038CG
100 12148007200 4,0 12148007500 — —
125 12148007200 4,0 12148007500 — —
Spare Parts
Shell Mills
order number catalogue number D1 max D1 D D6 L Ap1 max Z
max
ramp
angle max RPM
coolant
supply kg
2021347 12391021000 50 34 22 40 40 8,0 4 10.3° 13000 Yes 0,20
2021348 12391021200 63 47 27 48 40 8,0 4 7.0° 12000 Yes 0,30
2021349 12391021400 80 64 27 60 50 8,0 5 4.8° 10000 Yes 0,90
2021350 12391021600 100 84 32 78 50 8,0 6 3.8° 9000 No 1,20
2021351 12391021800 125 109 40 89 50 8,0 7 2.8° 8000 No 1,70
Copy Mills
• General purpose face and copy milling.
• Anti-rotation feature for top security.
NOTE: All spare parts except the insert screws must be ordered separately.
WID_Master16_IndexableMIlling_CopyMills_M090_M091_Metric_REBRAND.indd 91 10/29/15 2:17 PM
M92
LViWID M 16 I d bl MIlli C Mill M092 M093 M i REBRANDO b 14 201510 24AM
widia.com
Copy Mills • M100™ Series
Inserts
Copy Mills
Insert Selection Guide
Material
Group
Light
Machining
General
Purpose
Heavy
Machining
Geometry Grade Geometry Grade Geometry Grade
P1–P2
RDMT-TX TN6525
RDMT-TX TN6540
RDMT-TX TN6540
P3–P4
RDMT-TX TN6525
RDMW-TX TN6540
RDMW-TX TN6540
P5–P6
RDMT-TX TN7525
RDMT-TX TN7535
RDMT-TX TN7535
M1–M2
RDMT-TX TN6525
RDMT-TX TN6540
RDMT-TX TN6540
M3
RDMT-TX TN6525
RDMT-TX TN6540
RDMT-TX TN6540
K1–K2
RDMW-TX TN2510
RDMW-TX TN7535
RDMW-TX TN7535
K3
RDMW-TX TN2510
RDMW-TX TN7535
RDMW-TX TN7535
N1–N2
––
––
––
N3
––
––
––
S1–S2
––
RDMT-TX TN6540
––
S3
––
RDMT-TX TN6540
––
S4
––
RDMT-TX TN6540
RDMT-TX TN6540
H1
RDMW-TX TN2510
RDMW-TX TN2510
––
• Precision pressed positive geometry for lower cutting forces.
• First choice for general machining, stainless steel, and
high-temp alloys in roughing operations.
• Precision ground positive geometry for lower cutting forces
• First choice for general machining, stainless steel, and high-temp alloys.
RDMT-TX
RDHT-TX
catalogue number D S hm
TN2510
TN6525
TN6540
TN7525
TN7535
TTI25
RDHT1605M0TX 16,00 5,56 0,12
–
–
–
–
–
2012462
RDHT-TX
iC16 • Inserts
rst choice
alternate choice
P
M
K
N
S
H
RDMT-TX
catalogue number D S hm
TN2510
TN6525
TN6540
TN7525
TN7535
TTI25
RDMT1605M0TX 16,00 5,56 0,18
–
2957536
2957533
2020767
2207645
–
WID_Master16_IndexableMIlling_CopyMills_M092_M093_Metric_REBRAND.indd 92 10/29/15 2:17 PM
M93
LViWID M 16 I d bl MIlli C Mill M092 M093 M i REBRANDO b 14201510 24AM
widia.com
Copy Mills • M100™ Series
P
M
K
N
S
H
iC16 • Inserts
RDMW-TX
catalogue number D S hm
TN2510
TN6525
TN6540
TN7525
TN7535
TTI25
RDMW1605M0TX 16,00 5,56 0,15
–
–
3523083
2109476
2020749
–
Copy Mills
• Precision pressed insert.
• First choice for roughing operations,
especially for steel and cast iron.
rst choice
alternate choice
RDMW-TX
WID_Master16_IndexableMIlling_CopyMills_M092_M093_Metric_REBRAND.indd 93 10/29/15 2:17 PM
M94
LViWID M 16 I d bl MIlli C Mill M094 M095 M i REBRANDO b 14 201510 24AM
widia.com
Copy Mills • M100™ Series
Recommended Starting Speeds
Recommended Starting Speeds [m/min]
Material
Group TN2510 TN6525 TN6540 TN7525 TN7535 TTI25
P
1
660
580
540 410
320
280 360
280
240 410
310
280 545
475
445 430
360
300
2
410
370
330 320
250
215 250
190
170 310
250
215 335
305
275 310
250
215
3
370
330
305 280
215
185 215
170
140 280
215
185 305
275
245 310
250
215
4
275
260
230 235
170
145 180
130
110 235
170
145 230
210
190 265
215
180
5
330
300
275 310
235
200 240
180
150 310
235
200 310
275
250 320
235
200
6
230
205
175 205
160
130 160
120
100 205
160
130 190
160
130 145
110
90
M
1
270
240
210 190
120
80 130
80
60 245
220
185 245
220
185 480
310
215
2
245
210
190 120
80
50 80
50
40 220
190
170 220
190
170 325
205
145
3
190
175
150 125
80
55 85
50
40 175
155
140 175
155
140 320
210
145
K
1
420
360
300 275
245
220 220
205
180 380
280
240 355
320
290 220
185
155
2
360
300
250 215
190
180 175
155
140 325
240
200 280
250
230 180
145
125
3
300
250
200 180
160
145 155
145
125 240
200
170 235
210
190 145
125
100
N
1
–
–
––
–
––
–
––
–
––
–
––
–
–
2
–
–
––
–
––
–
––
–
––
–
––
–
–
3
–
–
––
–
––
–
––
–
––
–
––
–
–
S
1
–
–
––
–
–50
35
30 –
–
––
–
––
–
–
2
–
–
––
–
–25
20
10 –
–
––
–
––
–
–
3
–
–
––
–
–70
40
30 –
–
––
–
––
–
–
4
–
–
––
–
–60
30
25 –
–
––
–
––
–
–
H
1
145
110
70 –
–
––
–
––
–
––
–
––
–
–
2
145
110
70 –
–
––
–
––
–
––
–
––
–
–
3
115
80
45 –
–
––
–
––
–
––
–
––
–
–
NOTE: FIRST choice starting speeds are in bold type.
As the average chip thickness increases, the speed should be decreased.
Copy Mills
WID_Master16_IndexableMIlling_CopyMills_M094_M095_Metric_REBRAND.indd 94 10/29/15 2:17 PM
M95
LViWID M 16 I d bl MIlli C Mill M094 M095 M i REBRANDO b 14201510 24AM
widia.com
Copy Mills • M100™ Series
Recommended Starting Feeds
NOTE: Use “Light Machining” value as starting feed rate.
Copy Mills
Recommended Starting Feeds [mm]
At 8,00 Axial Depth of Cut (ap)
At 4,00 Axial Depth of Cut (ap)
At 2,00 Axial Depth of Cut (ap)
Light
Machining
General
Purpose
Heavy
Machining
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
RDHX-TX 0,17
0,53
1,06 0,13
0,38
0,76 0,09
0,28
0,57 0,08
0,25
0,50 0,08
0,23
0,45 RDHX-TX
RDMT-TX 0,35
0,63
1,28 0,25
0,46
0,92 0,19
0,34
0,68 0,17
0,30
0,59 0,15
0,27
0,54 RDMT-TX
RDMW-TX 0,35
0,79
1,61 0,25
0,57
1,15 0,19
0,43
0,85 0,17
0,37
0,74 0,15
0,34
0,68 RDMW-TX
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
RDHX-TX 0,24
0,72
1,46 0,17
0,52
1,04 0,13
0,39
0,78 0,11
0,34
0,68 0,10
0,31
0,62 RDHX-TX
RDMT-TX 0,48
0,87
1,76 0,35
0,62
1,26 0,26
0,47
0,93 0,23
0,41
0,81 0,21
0,37
0,74 RDMT-TX
RDMW-TX 0,48
1,09
2,22 0,35
0,78
1,58 0,26
0,58
1,17 0,23
0,51
1,02 0,21
0,46
0,93 RDMW-TX
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
RDHX-TX 0,13
0,40
0,81 0,10
0,29
0,58 0,07
0,22
0,43 0,06
0,19
0,38 0,06
0,17
0,35 RDHX-TX
RDMT-TX 0,27
0,48
0,97 0,19
0,35
0,70 0,14
0,26
0,52 0,13
0,23
0,45 0,12
0,21
0,42 RDMT-TX
RDMW-TX 0,27
0,60
1,22 0,19
0,44
0,87 0,14
0,33
0,65 0,13
0,28
0,57 0,12
0,26
0,52 RDMW-TX
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
RDHX-TX 0,11
0,35
0,70 0,08
0,25
0,50 0,06
0,19
0,38 0,05
0,16
0,33 0,05
0,15
0,30 RDHX-TX
RDMT-TX 0,23
0,42
0,84 0,17
0,30
0,60 0,13
0,23
0,45 0,11
0,20
0,39 0,10
0,18
0,36 RDMT-TX
RDMW-TX 0,23
0,52
1,05 0,17
0,38
0,76 0,13
0,28
0,56 0,11
0,25
0,49 0,10
0,23
0,45 RDMW-TX
At 1,00 Axial Depth of Cut (ap)
WID_Master16_IndexableMIlling_CopyMills_M094_M095_Metric_REBRAND.indd 95 10/29/15 2:17 PM
M96
LViWID M 16 I d bl MIlli C Mill M096 M097 M i REBRANDO b 14 201510 24AM
widia.com
Copy Mills • M100™ Series
Shell Mills • RC1606..
Spare Parts
Shell Mills
order number catalogue number D1 max D1 D D4 D6 L Ap1 max Z
max
ramp
angle max RPM
coolant
supply kg
2021358 12391023400 50 34 22 — 40 40 8,0 4 6.0° 13000 Yes 0,20
2021359 12391023600 52 36 22 — 40 40 8,0 4 5.8° 13000 Yes 0,30
2021357 12391023200 63 47 27 — 48 40 8,0 5 4.0° 12000 Yes 0,20
2021360 12391023800 66 50 27 — 48 40 8,0 5 3.8° 12000 Yes 0,30
2021352 12391022000 80 64 27 — 60 50 8,0 6 2.8° 10000 Yes 0,90
2021353 12391022200 100 84 32 — 78 50 8,0 7 2.3° 9000 No 1,20
2021354 12391022400 125 109 40 — 89 50 8,0 8 1.8° 8000 No 1,80
2021355 12391022600 160 144 40 67 90 63 8,0 9 1.3° 7000 No 2,90
2021356 12391022800 200 184 60 102 130 63 8,0 11 0.8° 6000 No 0,30
• General purpose face and copy milling.
• Anti-rotation feature for top security.
D1 max
insert
screw Nm
Torx
driver
socket-head
cap screw
socket-head cap screw
with coolant groove
50 12148007200 4,0 12148007500 125.025 MS1234CG
52 12148007200 4,0 12148007500 125.025 MS1234CG
63 12148007200 4,0 12148007500 125.230 MS2038CG
66 12148007200 4,0 12148007500 125.230 MS2038CG
80 12148007200 4,0 12148007500 125.230 MS2038CG
100 12148007200 4,0 12148007500 — —
125 12148007200 4,0 12148007500 — —
160 12148007200 4,0 12148007500 — —
200 12148007200 4,0 12148007500 — —
Copy Mills
NOTE: All spare parts except the insert screws must be ordered separately.
WID_Master16_IndexableMIlling_CopyMills_M096_M097_Metric_REBRAND.indd 96 10/29/15 2:17 PM
M97
LViWID M 16 I d bl MIlli C Mill M096 M097 M i REBRANDO b 14201510 24AM
widia.com
Copy Mills
Copy Mills • M100™ Series
Inserts
Insert Selection Guide
Material
Group
Light
Machining
General
Purpose
Heavy
Machining
Geometry Grade Geometry Grade Geometry Grade
P1–P2
...TX TN6525
...43 TN6540
...43 TN6540
P3–P4
...TX TN6525
...TX TN6540
...43 TN6540
P5–P6
...TX TN6525
...TX TN7535
...TX TN7535
M1–M2
...TX TN6525
...TX TN6540
...TX TN6540
M3
...TX TN6525
...TX TN6540
...TX TN6540
K1–K2
...43 TN2510
...TX WK15CM
...TX WK15CM
K3
...TX TN6525
...TX WK15CM
...TX WK15CM
N1–N2
––
––
––
N3
––
––
––
S1–S2
––
––
––
S3
––
––
––
S4
...43 TN6540
...TX TN6540
...TX TN6540
H1
––
...TX TN2510
––
RCMT-43
catalogue number D S hm
TN2510
TN6525
TN6540
TN7525
TN7535
RCMT1606M043M 16,00 6,35 0,20
–
–
2957537
2020771
2067140
• Optimised geometry providing excellent chip control,
even at lower depth of cut.
rst choice
alternate choice
RCMT-43
RCMT-TX
catalogue number D S hm
TN2510
TN6525
TN6540
TN7525
TN7535
RCMT1606M0TX 16,00 6,35 0,24
2012416
2957535
2957427
2012418
2020781
• Precision pressed positive geometry for lower cutting forces.
• First choice for general machining, stainless steel,
and high-temp alloys in roughing operations.
RCMT-TX
iC16 • Inserts
P
M
K
N
S
H
WID_Master16_IndexableMIlling_CopyMills_M096_M097_Metric_REBRAND.indd 97 10/29/15 2:17 PM
M98
LViWID M 16 I d bl MIlli C Mill M098 M099 M i REBRANDO b 14 201510 25AM
widia.com
Copy Mills • M100™ Series
Recommended Starting Speeds
Recommended Starting Speeds [m/min]
Material
Group TN2510 TN6525 TN6540 TN7525 TN7535 WK15CM
P
1
660
580
540 410
320
280 360
280
240 410
310
280 545
475
445 –
–
–
2
410
370
330 320
250
215 250
190
170 310
250
215 335
305
275 –
–
–
3
370
330
305 280
215
185 215
170
140 280
215
185 305
275
245 –
–
–
4
275
260
230 235
170
145 180
130
110 235
170
145 230
210
190 –
–
–
5
330
300
275 310
235
200 240
180
150 310
235
200 310
275
250 –
–
–
6
230
205
175 205
160
130 160
120
100 205
160
130 190
160
130 –
–
–
M
1
270
240
210 190
120
80 130
80
60 245
220
185 245
220
185 –
–
–
2
245
210
190 120
80
50 80
50
40 220
190
170 220
190
170 –
–
–
3
190
175
150 125
80
55 85
50
40 175
155
140 175
155
140 –
–
–
K
1
420
360
300 275
245
220 220
205
180 380
280
240 355
320
290 505
460
410
2
360
300
250 215
190
180 175
155
140 325
240
200 280
250
230 400
355
330
3
300
250
200 180
160
145 155
145
125 240
200
170 235
210
190 335
300
275
N
1
–
–
––
–
––
–
––
–
––
–
––
–
–
2
–
–
––
–
––
–
––
–
––
–
––
–
–
3
–
–
––
–
––
–
––
–
––
–
––
–
–
S
1
–
–
––
–
–50
35
30 –
–
––
–
––
–
–
2
–
–
––
–
–25
20
10 –
–
––
–
––
–
–
3
–
–
––
–
–70
40
30 –
–
––
–
––
–
–
4
–
–
––
–
–60
30
25 –
–
––
–
––
–
–
H
1
145
110
70 –
–
––
–
––
–
––
–
––
–
–
2
145
110
70 –
–
––
–
––
–
––
–
––
–
–
3
115
80
45 –
–
––
–
––
–
––
–
––
–
–
NOTE: FIRST choice starting speeds are in bold type.
As the average chip thickness increases, the speed should be decreased.
Copy Mills
WID_Master16_IndexableMIlling_CopyMills_M098_M099_Metric_REBRAND.indd 98 10/29/15 2:18 PM
M99
LViWID M 16 I d bl MIlli C Mill M098 M099 M i REBRANDO b 14201510 25AM
widia.com
Copy Mills • M100™ Series
Recommended Starting Feeds
NOTE: Use “Light Machining” value as starting feed rate.
Copy Mills
Recommended Starting Feeds [mm]
At 8,00 Axial Depth of Cut (ap)
At 4,00 Axial Depth of Cut (ap)
At 2,00 Axial Depth of Cut (ap)
Light
Machining
General
Purpose
Heavy
Machining
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
...43 0,70
0,92
1,42 0,51
0,66
1,02 0,38
0,49
0,76 0,33
0,43
0,66 0,30
0,39
0,60 ...43
...TX 0,70
1,06
1,72 0,51
0,76
1,23 0,38
0,57
0,91 0,33
0,50
0,79 0,30
0,45
0,73 ...TX
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
...43 0,96
1,26
1,97 0,69
0,90
1,40 0,52
0,67
1,04 0,45
0,59
0,90 0,41
0,54
0,83 ...43
...TX 0,96
1,46
2,38 0,69
1,04
1,68 0,52
0,78
1,25 0,45
0,68
1,08 0,41
0,62
0,99 ...TX
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
...43 0,54
0,70
1,08 0,39
0,50
0,78 0,29
0,38
0,58 0,25
0,33
0,50 0,23
0,30
0,46 ...43
...TX 0,54
0,81
1,30 0,39
0,58
0,93 0,29
0,43
0,69 0,25
0,38
0,61 0,23
0,35
0,55 ...TX
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
...43 0,46
0,60
0,93 0,33
0,44
0,67 0,25
0,33
0,50 0,22
0,28
0,44 0,20
0,26
0,40 ...43
...TX 0,46
0,70
1,12 0,33
0,50
0,81 0,25
0,38
0,60 0,22
0,33
0,52 0,20
0,30
0,48 ...TX
At 1,00 Axial Depth of Cut (ap)
WID_Master16_IndexableMIlling_CopyMills_M098_M099_Metric_REBRAND.indd 99 10/29/15 2:18 PM
M100
LViWID M 16 I d bl MIlli C Mill M100 M101 M i REBRANDO b 30 20159 59AM
widia.com
Two contact faces in V-shape provide
more insert rigidity and accuracy.
Secure and rigid
insert clamping.
Steel and carbide shanks offered.
Highly accurate
insert positioning.
Toroidal and high-feed inserts
use the same holder.
Through tool coolant
versions available.
Steel and carbide shanks offered.
Highly accurate
insert positioning.
• Ball nose and toroidal tools for semi-fi nishing through fi nishing.
• Performance-boosting High-Feed (HF) inserts offered standard.
• V-shaped contact faces enable maximum stability and accuracy.
M270
With precision-engineered ball nose, toroidal, and new high-feed inserts,
the M270 Series provides the highest accuracy and insert stability for
exceptional reliability and performance.
For Secure and Rigid Insert Clamping •
M270™ Series
WID_Master16_IndexableMIlling_CopyMills_M100_M101_Metric_REBRAND.indd 100 10/30/15 1:02 PM
M101
LViWID M 16 I d bl MIlli C Mill M100 M101 M i REBRANDO b 3020159 59AM
widia.com
Copy Mills
Pages: M102–M117 Pages: M118–M123
M270™ Ball Nose
M270 High Feed
M270 Toroidal
Max depth of cut: 5–16mm
Max depth of cut: 0,6–1,1mm
Max depth of cut: 0,3–4mm
Diameter: 10–32mm
Diameter: 10–20mm
Diameter: 10–20mm
Pages: M124–M130
P
M
K
S
H
P
M
K
S
H
P
M
K
S
H
Insert Offering
Ball nose inserts
BF/BR
Toroidal inserts
TF
High-Feed inserts
HF
WID_Master16_IndexableMIlling_CopyMills_M100_M101_Metric_REBRAND.indd 101 10/30/15 1:02 PM
M102
LViWID M 16 I d bl MIlli C Mill M102 M103 M i REBRANDO b 14 201510 25AM
widia.com
Copy Mills • M270™ Series
Ball Nose Tool Bodies
D1
insert
screw Nm
Torx
driver
10 12748610500 2,0 12148788900
12 12748610600 2,0 12148788900
16 12748610700 5,0 12148099300
20 12748610800 5,0 12148099300
25 12748610900 7,0 12148086800
32 12748611000 7,0 12146006300
Spare Parts
Ball Nose • Screw-On End Mills
NOTE: ZU = Effective teeth.
Z = number of pocket seats.
order number catalogue number D1 DPM G3X L L2 WF Z Z U inserts max RPM
coolant
supply kg
2243624 M270BD010M08 10 8,5 M8 42 25 10,0 1 2 M270B.10 57000 Yes 0,05
2243625 M270BD012M08 12 8,5 M8 42 25 10,0 1 2 M270B.12 55000 Yes 0,05
2243626 M270BD016M08 16 8,5 M8 47 30 10,0 1 2 M270B.16 53000 Yes 0,05
2243627 M270BD020M10 20 10,5 M10 59 40 14,0 1 2 M270B.20 52000 Yes 0,10
2243628 M270BD025M12 25 12,5 M12 72 50 19,0 1 2 M270B.25 50000 Yes 0,10
2243629 M270BD032M16 32 17,0 M16 73 50 22,0 1 2 M270B.32 46000 Yes 0,20
Copy Mills
• Rough, semi-nishing, and nishing with one system.
• Through tool coolant.
• Secure and rigid insert clamping.
NOTE: All spare parts except the insert screws must be ordered separately.
WID_Master16_IndexableMIlling_CopyMills_M102_M103_Metric_REBRAND.indd 102 10/29/15 2:18 PM
M103
LViWID M 16 I d bl MIlli C Mill M102 M103 M i REBRANDO b 14201510 25AM
widia.com
Copy Mills • M270™ Series
Ball Nose Tool Bodies
Spare Parts
Ball Nose • Weldon
®
Shanks
order number catalogue number D1 D L L2 Z Z U inserts max RPM
coolant
supply kg
2243618 M270BD010B12L90 10 12 90 45 1 2 M270B.10 57000 No 0,10
2243619 M270BD012B12L95 12 12 95 50 1 2 M270B.12 55000 No 0,10
2243620 M270BD016B16L105 16 16 105 57 1 2 M270B.16 53000 No 0,10
2243621 M270BD020B20L120 20 20 120 70 1 2 M270B.20 52000 No 0,20
2243622 M270BD025B25L145 25 25 145 89 1 2 M270B.25 50000 No 0,40
2243623 M270BD032B32L155 32 32 155 95 1 2 M270B.32 46000 No 0,80
• Rough, semi-nishing, and nishing with one system.
• Secure and rigid insert clamping.
D1
insert
screw Nm
Torx
driver
10 12748610500 2,0 12148788900
12 12748610600 2,0 12148788900
16 12748610700 5,0 12148099300
20 12748610800 5,0 12148099300
25 12748610900 7,0 12148086800
32 12748611000 7,0 12146006300
Copy Mills
NOTE: All spare parts except the insert screws must be ordered separately.
NOTE: ZU = Effective teeth.
Z = number of pocket seats.
WID_Master16_IndexableMIlling_CopyMills_M102_M103_Metric_REBRAND.indd 103 10/29/15 2:18 PM
M104
LViWID M 16 I d bl MIlli C Mill M104 M105 M i REBRANDO b 14 201510 25AM
widia.com
Copy Mills • M270™ Series
Ball Nose Tool Bodies
D1
insert
screw Nm
Torx
driver
10 12748610500 2,0 12148788900
12 12748610600 2,0 12148788900
16 12748610700 5,0 12148099300
20 12748610800 5,0 12148099300
25 12748610900 7,0 12148086800
32 12748611000 7,0 12146006300
Spare Parts
Ball Nose • Cylindrical Shanks
order number catalogue number D1 D L L2 Z Z U inserts max RPM
coolant
supply kg
2243613 M270BD010A12L140 10 12 140 45 1 2 M270B.10 57000 No 0,10
2243614 M270BD012A12L145 12 12 145 50 1 2 M270B.12 55000 No 0,10
2067470 M270BD016A16L155 16 16 155 57 1 2 M270B.16 53000 No 0,20
2243615 M270BD020A20L170 20 20 170 70 1 2 M270B.20 52000 No 0,40
2243616 M270BD025A25L195 25 25 195 89 1 2 M270B.25 50000 No 0,60
2243617 M270BD032A32L205 32 32 205 95 1 2 M270B.32 46000 No 1,10
Copy Mills
• Rough, semi-nishing, and nishing with one system.
• Secure and rigid insert clamping.
NOTE: All spare parts except the insert screws must be ordered separately.
NOTE: ZU = Effective teeth.
Z = number of pocket seats.
WID_Master16_IndexableMIlling_CopyMills_M104_M105_Metric_REBRAND.indd 104 10/29/15 2:18 PM
M105
LViWID M 16 I d bl MIlli C Mill M104 M105 M i REBRANDO b 14201510 25AM
widia.com
Copy Mills • M270™ Series
Ball Nose Tool Bodies
Spare Parts
Ball Nose • Carbide Cylindrical Shanks
order number catalogue number D1 D L L2 Z Z U inserts max RPM
coolant
supply kg
2424550 M270BD010A12L140C 10 12 140 45 1 2 M270B.10 57000 Yes 0,20
2424587 M270BD012A12L145C 12 12 145 50 1 2 M270B.12 55000 Yes 0,20
2424634 M270BD016A16L155C 16 16 155 57 1 2 M270B.16 53000 Yes 0,40
2639257 M270BD020A20L170C 20 20 170 70 1 2 M270B.20 52000 Yes 0,65
• Rough, semi-nishing, and nishing with one system.
• Through tool coolant.
• Carbide shank to improve rigidity.
D1
insert
screw Nm
Torx
driver
10 12748610500 2,0 12148788900
12 12748610600 2,0 12148788900
16 12748610700 5,0 12148099300
20 12748610800 5,0 12148099300
Copy Mills
NOTE: All spare parts except the insert screws must be ordered separately.
NOTE: ZU = Effective teeth.
Z = number of pocket seats.
WID_Master16_IndexableMIlling_CopyMills_M104_M105_Metric_REBRAND.indd 105 10/29/15 2:18 PM
M106
LViWID M 16 I d bl MIlli C Mill M106 M107 M i REBRANDO b 14 201510 26AM
widia.com
Copy Mills • M270™ Series
Inserts
Copy Mills
Insert Selection Guide • .B..10
Material
Group
Light
Machining
General
Purpose
Heavy
Machining
Geometry Grade Geometry Grade Geometry Grade
P1–P2
BF TN2505
BR TN7535
BR TN7535
P3–P4
BF TN2505
BR TN7535
BR TN7535
P5–P6
BF TN2505
BR TN7535
BR TN7535
M1–M2
BR TN7535
BR TN7535
BR TN7535
M3
BR TN7535
BR TN7535
BR TN7535
K1–K2
BF TN2505
BR TN7535
BR TN7535
K3
BF TN2505
BR TN7535
BR TN7535
N1–N2
––
––
––
N3
––
––
––
S1–S2
––
––
––
S3
––
––
––
S4
––
––
––
H1
BF TN2505
BF TN2505
– TN2510
Insert Selection Guide • .B..12
Material
Group
Light
Machining
General
Purpose
Heavy
Machining
Geometry Grade Geometry Grade Geometry Grade
P1–P2
BF TN2505
BR TN7535
BR TN7535
P3–P4
BF TN2505
BR TN7535
BR TN7535
P5–P6
BF TN2505
BR TN7535
BR TN7535
M1–M2
BR TN7535
BR TN7535
BR TN7535
M3
BR TN7535
BR TN7535
BR TN7535
K1–K2
BF TN2505
BR TN2510
BR TN7535
K3
BF TN2505
BR TN2510
BR TN7535
N1–N2
––
––
––
N3
––
––
––
S1–S2
––
––
––
S3
––
––
––
S4
––
––
––
H1
BF TN2505
BF TN2505
BR TN2510
Insert Selection Guide • .B..16
Material
Group
Light
Machining
General
Purpose
Heavy
Machining
Geometry Grade Geometry Grade Geometry Grade
P1–P2
BF TN6525
BR TN7535
BR TN7535
P3–P4
BF TN6525
BR TN7535
BR TN7535
P5–P6
BF TN6525
BR TN7535
BR TN7535
M1–M2
BF TN6525
BF TN6525
BR TN7535
M3
BF TN6525
BF TN6525
BR TN7535
K1–K2
BF TN2505
BR TN7535
BR TN7535
K3
BF TN2505
BR TN7535
BR TN7535
N1–N2
––
––
––
N3
––
––
––
S1–S2
––
––
––
S3
––
––
––
S4
BF TN2505
––
––
H1
BF TN2505
BF TN2505
BR TN2510
WID_Master16_IndexableMIlling_CopyMills_M106_M107_Metric_REBRAND.indd 106 10/29/15 2:18 PM
M107
LViWID M 16 I d bl MIlli C Mill M106 M107 M i REBRANDO b 14201510 26AM
widia.com
Copy Mills • M270™ Series
Inserts
Copy Mills
Insert Selection Guide • .B..20
Material
Group
Light
Machining
General
Purpose
Heavy
Machining
Geometry Grade Geometry Grade Geometry Grade
P1–P2
BF TN6540
BF TN6540
BF TN6540
P3–P4
BF TN6540
BF TN6540
BF TN7535
P5–P6
BF TN6540
BF TN7535
BF TN7535
M1–M2
BF TN6540
BF TN6540
BF TN7535
M3
BF TN6540
BF TN6540
BF TN7535
K1–K2
BR TN2505
BR TN2505
––
K3
BR TN2505
BR TN2505
––
N1–N2
––
––
––
N3
––
––
––
S1–S2
––
BF TN6540
––
S3
––
BF TN6540
––
S4
––
BF TN6540
––
H1
––
BR TN2505
– TN2510
Insert Selection Guide • .B..25
Material
Group
Light
Machining
General
Purpose
Heavy
Machining
Geometry Grade Geometry Grade Geometry Grade
P1–P2
BF TN2510
BR TN7525
BR TN7535
P3–P4
BF TN2510
BR TN7525
BR TN7535
P5–P6
BF TN2510
BR TN7525
BR TN7535
M1–M2
BF TN2510
BF TN2510
BR TN7535
M3
BF TN2510
BF TN2510
BR TN7535
K1–K2
BF TN2510
BF TN2510
BR TN7535
K3
BF TN2505
BF TN2510
BR TN7535
N1–N2
––
––
––
N3
––
––
––
S1–S2
BF TN2510
––
––
S3
BF TN2510
––
––
S4
BF TN2505
BR TN7535
––
H1
BF TN2505
BF TN2510
BR TN2510
Insert Selection Guide • .B..32
Material
Group
Light
Machining
General
Purpose
Heavy
Machining
Geometry Grade Geometry Grade Geometry Grade
P1–P2
BF TN2510
BR TN7525
BR TN7535
P3–P4
BF TN2510
BR TN7525
BR TN7535
P5–P6
BF TN2510
BR TN7525
BR TN7535
M1–M2
BF TN2510
BF TN2510
BR TN7535
M3
BF TN2510
BF TN2510
BR TN7535
K1–K2
BF TN2510
BF TN2510
BR TN7535
K3
BF TN2505
BF TN2510
BR TN7535
N1–N2
––
––
––
N3
––
––
––
S1–S2
BF TN2510
––
––
S3
BF TN2510
––
––
S4
BF TN2505
BR TN7535
––
H1
BF TN2505
BF TN2510
BR TN2510
WID_Master16_IndexableMIlling_CopyMills_M106_M107_Metric_REBRAND.indd 107 10/29/15 2:18 PM
M108
LViWID M 16 I d bl MIlli C Mill M108 M109 M i REBRANDO b 14 201510 26AM
widia.com
M270 BF
catalogue number W S RC hm
TN2505
TN2510
TN6525
TN6540
TN7525
TN7535
M270BF10 10,00 2,38 5,00 0,08
2012698
2012700
–
–
–
–
M270BF12 12,00 3,18 6,00 0,08
2012718
2012720
2957538
–
–
–
M270BF16 16,00 4,76 8,00 0,08
2012728
2012730
2957541
–
–
–
M270BF20 20,00 4,76 10,00 0,10
2012748
2012750
2957542
–
–
–
M270BF25 25,00 4,76 12,50 0,10
2012758
2012760
–
–
–
–
M270BF32 32,00 4,76 16,00 0,10
2012778
2012780
–
–
–
–
• -BF geometry is the rst choice for all nishing
and light operations.
rst choice
alternate choice
M270-BF
P
M
K
N
S
H
Copy Mills
Copy Mills • M270™ Series
Ball Nose Inserts
WID_Master16_IndexableMIlling_CopyMills_M108_M109_Metric_REBRAND.indd 108 10/29/15 2:18 PM
M109
LViWID M 16 I d bl MIlli C Mill M108 M109 M i REBRANDO b 14201510 26AM
widia.com
Copy Mills • M270™ Series
Ball Nose Inserts
M270 BR
catalogue number W S RC hm
TN2505
TN2510
TN6525
TN6540
TN7525
TN7535
M270BR10 10,00 2,38 5,00 0,08
–
2012610
–
–
2012612
2012624
M270BR12 12,00 3,18 6,00 0,08
–
2012630
–
2957539
2012632
2012634
M270BR16 16,00 4,76 8,00 0,08
–
2012640
–
2957540
2012642
2113506
M270BR20 20,00 4,76 10,00 0,10
–
2012658
–
2957543
2012660
2012662
M270BR25 25,00 4,76 12,50 0,10
–
2012668
–
–
2012670
2012672
M270BR32 32,00 4,76 16,00 0,10
–
2012688
–
–
2012690
2012692
• -BR geometry is the rst choice for all semi-nishing
and medium-duty applications.
Copy Mills
rst choice
alternate choice
P
M
K
N
S
H
M270-BR
WID_Master16_IndexableMIlling_CopyMills_M108_M109_Metric_REBRAND.indd 109 10/29/15 2:18 PM
M110
LViWID M 16 I d bl MIlli C Mill M110 M111 M i REBRANDO b 14 201510 26AM
widia.com
Copy Mills • M270™ Series
Recommended Starting Speeds
NOTE: FIRST choice starting speeds are in bold type.
As the average chip thickness increases, the speed should be decreased.
Copy Mills
Recommended Starting Speeds [m/min]
Material
Group TN7525 TN7535 TTI25
P
1
410
310
280 545
475
445 430
360
300
2
310
250
215 335
305
275 310
250
215
3
280
215
185 305
275
245 310
250
215
4
235
170
145 230
210
190 265
215
180
5
310
235
200 310
275
250 320
235
200
6
205
160
130 190
160
130 145
110
90
M
1
245
220
185 245
220
185 480
310
215
2
220
190
170 220
190
170 325
205
145
3
175
155
140 175
155
140 320
210
145
K
1
380
280
240 355
320
290 220
185
155
2
325
240
200 280
250
230 180
145
125
3
240
200
170 235
210
190 145
125
100
N
1
–
–
––
–
––
–
–
2
–
–
––
–
––
–
–
3
–
–
––
–
––
–
–
S
1
–
–
––
–
––
–
–
2
–
–
––
–
––
–
–
3
–
–
––
–
––
–
–
4
–
–
––
–
––
–
–
H
1
–
–
––
–
––
–
–
2
–
–
––
–
––
–
–
3
–
–
––
–
––
–
–
Material
Group TN2505 TN2510 TN6525 TN6540
P
1
550
420
360 660
580
540 410
320
280 360
280
240
2
320
240
205 410
370
330 320
250
215 250
190
170
3
320
240
205 370
330
305 280
215
185 215
170
140
4
–
–
– 275
260
230 235
170
145 180
130
110
5
–
–
– 330
300
275 310
235
200 240
180
150
6
–
–
– 230
205
175 205
160
130 160
120
100
M
1
–
–
– 270
240
210 190
120
80 130
80
60
2
–
–
– 245
210
190 120
80
50 80
50
40
3
–
–
– 190
175
150 125
80
55 85
50
40
K
1
400
300
250 420
360
300 275
245
220 220
205
180
2
540
365
280 360
300
250 215
190
180 175
155
140
3
310
190
155 300
250
200 180
160
145 155
145
125
N
1
–
–
––
–
––
–
––
–
–
2
–
–
––
–
––
–
––
–
–
3
–
–
––
–
––
–
––
–
–
S
1
–
–
––
–
––
–
–50
35
30
2
–
–
––
–
––
–
–25
20
10
3
–
–
––
–
––
–
–70
40
30
4
–
–
––
–
––
–
–60
30
25
H
1
175
140
95 145
110
70 –
–
––
–
–
2
175
140
95 145
110
70 –
–
––
–
–
3
140
115
80 115
80
45 –
–
––
–
–
WID_Master16_IndexableMIlling_CopyMills_M110_M111_Metric_REBRAND.indd 110 10/29/15 2:18 PM
M111
LViWID M 16 I d bl MIlli C Mill M110 M111 M i REBRANDO b 14201510 26AM
widia.com
Copy Mills • M270™ Series
Recommended Starting Feeds
NOTE: Use “Light Machining” value as starting feed rate.
Copy Mills
Recommended Starting Feeds [mm] • .B..10
At 4,76 Axial Depth of Cut (ap)
At 2,38 Axial Depth of Cut (ap)
At 1,19 Axial Depth of Cut (ap)
Light
Machining
General
Purpose
Heavy
Machining
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
BF 0,18
0,36
0,68 0,13
0,25
0,45 0,09
0,18
0,32 0,08
0,16
0,28 0,08
0,15
0,25 BF
BR 0,29
0,46
0,84 0,21
0,31
0,54 0,15
0,23
0,39 0,13
0,20
0,33 0,12
0,18
0,30 BR
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
BF 0,25
0,51
1,02 0,18
0,34
0,63 0,13
0,25
0,44 0,11
0,22
0,38 0,10
0,20
0,35 BF
BR 0,41
0,66
1,34 0,28
0,44
0,76 0,21
0,31
0,53 0,18
0,27
0,45 0,17
0,25
0,41 BR
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
BF 0,14
0,27
0,49 0,10
0,19
0,34 0,07
0,14
0,25 0,06
0,12
0,21 0,06
0,11
0,19 BF
BR 0,22
0,34
0,61 0,16
0,24
0,40 0,12
0,17
0,29 0,10
0,15
0,25 0,09
0,14
0,23 BR
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
BF 0,12
0,23
0,42 0,08
0,16
0,29 0,06
0,12
0,21 0,05
0,10
0,18 0,05
0,10
0,17 BF
BR 0,19
0,29
0,51 0,14
0,20
0,35 0,10
0,15
0,25 0,09
0,13
0,22 0,08
0,12
0,20 BR
At 0,60 Axial Depth of Cut (ap)
WID_Master16_IndexableMIlling_CopyMills_M110_M111_Metric_REBRAND.indd 111 10/29/15 2:18 PM
M112
LViWID M 16 I d bl MIlli C Mill M112 M113 M i REBRANDO b 14 201510 26AM
widia.com
NOTE: Use “Light Machining” value as starting feed rate.
Recommended Starting Feeds [mm] • .B..12
At 5,00 Axial Depth of Cut (ap)
At 2,50 Axial Depth of Cut (ap)
At 1,25 Axial Depth of Cut (ap)
Light
Machining
General
Purpose
Heavy
Machining
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
BR 0,20
0,45
0,68 0,14
0,31
0,46 0,11
0,23
0,34 0,09
0,20
0,29 0,08
0,18
0,27 BR
BF 0,32
0,61
0,94 0,23
0,42
0,62 0,17
0,31
0,45 0,15
0,26
0,38 0,13
0,24
0,35 BF
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
BR 0,28
0,63
0,99 0,20
0,43
0,64 0,15
0,31
0,46 0,13
0,27
0,40 0,12
0,25
0,36 BR
BF 0,45
0,89
1,42 0,31
0,58
0,87 0,23
0,42
0,61 0,20
0,36
0,53 0,18
0,33
0,48 BF
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
BR 0,15
0,33
0,50 0,11
0,24
0,35 0,08
0,17
0,26 0,07
0,15
0,22 0,06
0,14
0,20 BR
BF 0,24
0,46
0,69 0,17
0,32
0,47 0,13
0,23
0,34 0,11
0,20
0,29 0,10
0,18
0,27 BF
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
BR 0,13
0,29
0,43 0,09
0,20
0,30 0,07
0,15
0,22 0,06
0,13
0,19 0,06
0,12
0,18 BR
BF 0,21
0,39
0,58 0,15
0,27
0,40 0,11
0,20
0,29 0,10
0,18
0,25 0,09
0,16
0,23 BF
At 0,63 Axial Depth of Cut (ap)
Copy Mills
Copy Mills • M270™ Series
Recommended Starting Feeds
WID_Master16_IndexableMIlling_CopyMills_M112_M113_Metric_REBRAND.indd 112 10/29/15 2:18 PM
M113
LViWID M 16 I d bl MIlli C Mill M112 M113 M i REBRANDO b 14201510 26AM
widia.com
Copy Mills • M270™ Series
Recommended Starting Feeds
NOTE: Use “Light Machining” value as starting feed rate.
Recommended Starting Feeds [mm] • .B..16
At 8,00 Axial Depth of Cut (ap)
At 4,00 Axial Depth of Cut (ap)
At 2,00 Axial Depth of Cut (ap)
Light
Machining
General
Purpose
Heavy
Machining
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
BF 0,21
0,44
0,70 0,15
0,31
0,48 0,11
0,23
0,35 0,10
0,20
0,30 0,09
0,18
0,28 BF
BR 0,32
0,60
0,94 0,23
0,42
0,63 0,17
0,31
0,46 0,15
0,26
0,40 0,13
0,24
0,36 BR
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
BF 0,29
0,61
0,99 0,21
0,43
0,66 0,16
0,31
0,48 0,14
0,27
0,42 0,12
0,25
0,38 BF
BR 0,44
0,85
1,38 0,31
0,57
0,88 0,23
0,42
0,63 0,20
0,36
0,54 0,18
0,33
0,50 BR
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
BF 0,16
0,33
0,52 0,12
0,23
0,36 0,09
0,17
0,27 0,08
0,15
0,23 0,07
0,14
0,21 BF
BR 0,24
0,45
0,69 0,17
0,31
0,48 0,13
0,23
0,35 0,11
0,20
0,30 0,10
0,18
0,28 BR
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
BF 0,14
0,28
0,45 0,10
0,20
0,31 0,08
0,15
0,23 0,07
0,13
0,20 0,06
0,12
0,18 BF
BR 0,21
0,38
0,59 0,15
0,27
0,41 0,11
0,20
0,30 0,10
0,17
0,26 0,09
0,16
0,24 BR
At 1,00 Axial Depth of Cut (ap)
Copy Mills
WID_Master16_IndexableMIlling_CopyMills_M112_M113_Metric_REBRAND.indd 113 10/29/15 2:18 PM
M114
LViWID M 16 I d bl MIlli C Mill M114 M115 M i REBRANDO b 14 201510 26AM
widia.com
Copy Mills • M270™ Series
Recommended Starting Feeds
NOTE: Use “Light Machining” value as starting feed rate.
Recommended Starting Feeds [mm] • .B..20
At 10,00 Axial Depth of Cut (ap)
At 5,00 Axial Depth of Cut (ap)
At 2,50 Axial Depth of Cut (ap)
Light
Machining
General
Purpose
Heavy
Machining
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
BF 0,28
0,37
0,61 0,20
0,27
0,43 0,15
0,20
0,32 0,13
0,17
0,28 0,12
0,16
0,25 BF
BR 0,36
0,58
1,01 0,26
0,41
0,70 0,19
0,30
0,52 0,17
0,26
0,45 0,15
0,24
0,41 BR
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
BF 0,39
0,51
0,85 0,28
0,36
0,59 0,21
0,27
0,44 0,18
0,23
0,38 0,17
0,21
0,35 BF
BR 0,50
0,81
1,44 0,36
0,56
0,97 0,26
0,42
0,71 0,23
0,36
0,61 0,21
0,33
0,56 BR
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
BF 0,22
0,28
0,46 0,15
0,20
0,33 0,12
0,15
0,24 0,10
0,13
0,21 0,09
0,12
0,19 BF
BR 0,27
0,44
0,76 0,20
0,31
0,53 0,15
0,23
0,39 0,13
0,20
0,34 0,12
0,18
0,31 BR
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
BF 0,19
0,24
0,40 0,13
0,17
0,28 0,10
0,13
0,21 0,09
0,11
0,18 0,08
0,10
0,17 BF
BR 0,24
0,38
0,65 0,17
0,27
0,46 0,13
0,20
0,34 0,11
0,17
0,30 0,10
0,16
0,27 BR
At 1,25 Axial Depth of Cut (ap)
Copy Mills
WID_Master16_IndexableMIlling_CopyMills_M114_M115_Metric_REBRAND.indd 114 10/29/15 2:18 PM
M115
LViWID M 16 I d bl MIlli C Mill M114 M115 M i REBRANDO b 14201510 26AM
widia.com
Copy Mills • M270™ Series
Recommended Starting Feeds
NOTE: Use “Light Machining” value as starting feed rate.
Copy Mills
Recommended Starting Feeds [mm] • .B..25
At 12,50 Axial Depth of Cut (ap)
At 6,25 Axial Depth of Cut (ap)
At 3,13 Axial Depth of Cut (ap)
Light
Machining
General
Purpose
Heavy
Machining
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
BF 0,27
0,47
0,77 0,19
0,33
0,54 0,14
0,25
0,40 0,12
0,21
0,35 0,11
0,20
0,32 BF
BR 0,36
0,58
1,02 0,26
0,41
0,70 0,19
0,30
0,52 0,17
0,26
0,45 0,15
0,24
0,41 BR
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
BF 0,37
0,65
1,09 0,26
0,46
0,75 0,19
0,34
0,55 0,17
0,29
0,47 0,15
0,27
0,43 BF
BR 0,50
0,81
1,44 0,36
0,56
0,97 0,26
0,42
0,71 0,23
0,36
0,61 0,21
0,33
0,56 BR
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
BF 0,20
0,35
0,58 0,15
0,25
0,41 0,11
0,19
0,30 0,09
0,16
0,27 0,09
0,15
0,24 BF
BR 0,27
0,44
0,76 0,20
0,31
0,53 0,15
0,23
0,39 0,13
0,20
0,34 0,12
0,18
0,31 BR
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
BF 0,17
0,31
0,50 0,13
0,22
0,36 0,09
0,16
0,26 0,08
0,14
0,23 0,08
0,13
0,21 BF
BR 0,24
0,38
0,65 0,17
0,27
0,46 0,13
0,20
0,34 0,11
0,17
0,30 0,10
0,16
0,27 BR
At 1,56 Axial Depth of Cut (ap)
WID_Master16_IndexableMIlling_CopyMills_M114_M115_Metric_REBRAND.indd 115 10/29/15 2:18 PM
M116
LViWID M 16 I d bl MIlli C Mill M116 M117 M i REBRANDN b 12 20158 50AM
widia.com
Copy Mills • M270™ Series
Recommended Starting Feeds
NOTE: Use “Light Machining” value as starting feed rate.
Copy Mills
Recommended Starting Feeds [mm] • .B..32
At 16,00 Axial Depth of Cut (ap)
At 8,00 Axial Depth of Cut (ap)
At 4,00 Axial Depth of Cut (ap)
Light
Machining
General
Purpose
Heavy
Machining
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
BF 0,26
0,46
0,72 0,19
0,33
0,51 0,14
0,25
0,38 0,12
0,21
0,33 0,11
0,20
0,30 BF
BR 0,35
0,57
0,92 0,25
0,41
0,64 0,19
0,30
0,48 0,17
0,26
0,41 0,15
0,24
0,38 BR
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
BF 0,36
0,64
1,01 0,26
0,45
0,71 0,19
0,34
0,52 0,17
0,29
0,45 0,15
0,27
0,41 BF
BR 0,49
0,80
1,28 0,35
0,56
0,89 0,26
0,42
0,65 0,23
0,36
0,57 0,21
0,33
0,52 BR
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
BF 0,20
0,35
0,55 0,15
0,25
0,39 0,11
0,19
0,29 0,09
0,16
0,25 0,09
0,15
0,23 BF
BR 0,27
0,43
0,69 0,19
0,31
0,49 0,14
0,23
0,36 0,13
0,20
0,32 0,12
0,18
0,29 BR
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
BF 0,17
0,30
0,47 0,13
0,22
0,34 0,09
0,16
0,25 0,08
0,14
0,22 0,08
0,13
0,20 BF
BR 0,23
0,38
0,59 0,17
0,27
0,42 0,13
0,20
0,31 0,11
0,17
0,27 0,10
0,16
0,25 BR
At 2,00 Axial Depth of Cut (ap)
WID_Master16_IndexableMIlling_CopyMills_M116_M117_Metric_REBRAND.indd 116 11/12/15 8:55 AM
M117
LViWID M 16 I d bl MIlli C Mill M116 M117 M i REBRANDN b 1220158 50AM
widia.com
Copy Mills • M270™ Series
Additional Application Advice • M270 Ball Nose
1. Insert Style: Considerations for Selecting the Correct Insert
Starting Values for Semi-Finishing in Common Material Types (L/D ratio <3 x D1)
Selecting the Correct Insert and Cutting Conditions for Your Application
2. Calculating effective diameter and resulting surface speed
When machining inclinations between
11° and 55°, further modi cation of vc
is required. Apply factor “k” from the
given formula to calculate the correct
vc (vceff). This corrected value is then
used to calculate the proper RPM for
the tool.
It is important to consider the effective
diameter (Deff) when using light depths
of cut in order to properly calculate RPM
values. Use the following formula when
machining at surfaces or inclinations
of 10° or less to nd the Deff value,
and then use this for RPM calculations
as opposed to using the overall insert
diameter (D1).
Deff
D1
Ap1
Deff
D1
α
2-(D1-2Ap1)2
1
sin [α + arcCos (1-(2 (Ap1/D1)))]
vceff = vc X k
k =
Deff
M270 is usually applied for semi- nishing and nishing operations; Ap1/ae conditions depend on the operation. As a general rule: Ap1/ae )0,05D.
Material
Tool Diameter
Ø10 Ø12 Ø16 Ø20 Ø25 Ø32
max rec.
(mm) fz
(mm/
tooth)
max rec.
(mm) fz
(mm/
tooth)
max rec.
(mm) fz
(mm/
tooth)
max rec.
(mm) fz
(mm/
tooth)
max rec.
(mm) fz
(mm/
tooth)
max rec.
(mm) fz
(mm/
tooth)Ap1 ae Ap1 ae Ap1 ae Ap1 ae Ap1 ae Ap1 ae
Soft Steel <250 HB 0,7 0,7 0,2 0,8 0,8 0,2 1,1 1,1 0,27 1,3 1,3 0,27 1,7 1,7 0,3 2,1 2,1 0,3
High-Strength Steel
33–44 HRC 0,5 0,5 0,15 0,6 0,6 0,2 0,8 0,8 0,25 1 1 0,25 1,3 1,3 0,25 1,6 1,6 0,25
Hardened Steel
44–55 HRC 0,3 0,3 0,15 0,4 0,4 0,2 0,5 0,5 0,22 0,7 0,7 0,22 0,8 0,8 0,25 1,1 1,1 0,25
Grey Cast Iron GG25… 1 1 0,2 1,2 1,2 0,25 1,6 1,6 0,25 2 2 0,25 2,5 2,5 0,3 3,2 3,2 0,3
Nodular Cast Iron
GGG60… 0,7 0,7 0,2 0,8 0,8 0,25 1,1 1,1 0,25 1,3 1,3 0,25 1,7 1,7 0,3 2,1 2,1 0,3
Best Choices for Insert and Grade Selection
BR Geometry BF Geometry
First choice
Alternate choice
Grade TN7535 TN2510 TN2505
Roughing Operation
Finishing Operation
Low RPM Machine
Flat Areas or Face Milling (≤10° inclination)
Hard Machining
Unstable and/or Long Overhangs
HSM or 5-Axis Machining (smaller ap/ae values)
WID_Master16_IndexableMIlling_CopyMills_M116_M117_Metric_REBRAND.indd 117 11/12/15 8:55 AM
M118
LViWID M 16 I d bl MIlli C Mill M118 M119 M i REBRANDO b 14 201510 27AM
widia.com
Copy Mills • M270™ Series
Toroidal Tool Bodies
D1
insert
screw Nm
Torx
driver
12 12748610600 2,0 12148788900
16 12748610700 5,0 12148099300
20 12748610800 5,0 12148099300
Spare Parts
Toroidal • Screw-On End Mills
NOTE: ZU = Effective teeth.
Z = number of pocket seats.
order number catalogue number D1 D DPM G3X L L2 WF Z Z U inserts max RPM
coolant
supply kg
3926546 M270TD012M08 12 13 8,5 M8 42 25 10 1 2 M270TF12R.. 55000 Yes 0,02
3926547 M270TD016M08 16 13 8,5 M8 47 30 10 1 2 M270TF16R.. 53000 Yes 0,09
3926548 M270TD020M10 20 18 10,5 M10 59 40 14 1 2 M270TF20R.. 52000 Yes 0,07
Copy Mills
• Semi-nishing and nishing applications.
• Through tool coolant.
• Secure and rigid insert clamping.
NOTE: All spare parts except the insert screws must be ordered separately.
WID_Master16_IndexableMIlling_CopyMills_M118_M119_Metric_REBRAND.indd 118 10/29/15 2:18 PM
M119
LViWID M 16 I d bl MIlli C Mill M118 M119 M i REBRANDO b 14201510 27AM
widia.com
Copy Mills • M270™ Series
Toroidal Tool Bodies
D1
insert
screw Nm
Torx
driver
10 12748610500 2,0 12148788900
12 12748610600 2,0 12148788900
16 12748610700 5,0 12148099300
20 12748610800 5,0 12148099300
Spare Parts
Toroidal • Cylindrical Shanks
NOTE: ZU = Effective teeth.
Z = number of pocket seats.
order number catalogue number D1 D D3 L L2 Z Z U inserts max RPM
coolant
supply kg
3926514 M270TD010A10L120 10 10 9 120 45 1 2 M270TF10R.. 57000 Yes 0,06
3926515 M270TD012A12L140 12 12 11 140 50 1 2 M270TF12R.. 55000 Yes 0,09
3926516 M270TD016A16L160 16 16 14 160 57 1 2 M270TF16R.. 53000 Yes 0,19
3926517 M270TD020A20L180 20 20 18 180 70 1 2 M270TF20R.. 52000 Yes 0,35
• Semi-nishing and nishing applications.
• Through tool coolant.
• Secure and rigid insert clamping.
NOTE: All spare parts except the insert screws must be ordered separately.
Copy Mills
WID_Master16_IndexableMIlling_CopyMills_M118_M119_Metric_REBRAND.indd 119 10/29/15 2:18 PM
M120
LViWID M 16 I d bl MIlli C Mill M120 M121 M i REBRANDO b 14 201510 27AM
widia.com
Copy Mills • M270™ Series
Toroidal Tool Bodies
Spare Parts
Toroidal • Carbide Cylindrical Shanks
NOTE: ZU = Effective teeth.
Z = number of pocket seats.
order number catalogue number D1 D D3 L L2 Z Z U inserts max RPM
coolant
supply kg
3926518 M270TD010A10L120C 10 10 9 120 45 1 2 M270TF10R.. 57000 Yes 0,11
3926519 M270TD010A10L150C 10 10 9 150 45 1 2 M270TF10R.. 57000 Yes 0,14
3926520 M270TD012A12L120C 12 12 11 120 50 1 2 M270TF12R.. 55000 Yes 0,15
3926521 M270TD012A12L160C 12 12 11 160 50 1 2 M270TF12R.. 55000 Yes 0,22
3926522 M270TD016A16L140C 16 16 14 140 57 1 2 M270TF16R.. 53000 Yes 0,32
3926543 M270TD016A16L180C 16 16 14 180 57 1 2 M270TF16R.. 53000 Yes 0,44
3926544 M270TD020A20L150C 20 20 18 150 70 1 2 M270TF20R.. 52000 Yes 0,52
3926545 M270TD020A20L200C 20 20 18 200 70 1 2 M270TF20R.. 52000 Yes 0,74
• Semi-nishing and nishing applications.
• Through tool coolant.
• Carbide shank for higher rigidity.
D1
insert
screw Nm
Torx
driver
10 12748610500 2,0 12148788900
12 12748610600 2,0 12148788900
16 12748610700 5,0 12148099300
20 12748610800 5,0 12148099300
Copy Mills
NOTE: All spare parts except the insert screws must be ordered separately.
WID_Master16_IndexableMIlling_CopyMills_M120_M121_Metric_REBRAND.indd 120 10/29/15 2:18 PM
M121
LViWID M 16 I d bl MIlli C Mill M120 M121 M i REBRANDO b 14201510 27AM
widia.com
Copy Mills • M270™ Series
Inserts
Copy Mills
Insert Selection Guide
Material
Group
Light
Machining
General
Purpose
Heavy
Machining
Geometry Grade Geometry Grade Geometry Grade
P1–P2
TF TN2510
TF TN2525
TF TN2525
P3–P4
TF TN2510
TF TN2525
TF TN2525
P5–P6
TF TN2510
TF TN2525
––
M1–M2
TF TN2510
––
––
M3
TF TN2510
––
––
K1–K2
TF TN2510
TF TN2525
––
K3
TF TN2510
TF TN2525
––
N1–N2
––
––
––
N3
––
––
––
S1–S2
TF TN2510
––
––
S3
TF TN2510
––
––
S4
TF TN2510
––
––
H1
TF TN2505
TF TN2510
––
WID_Master16_IndexableMIlling_CopyMills_M120_M121_Metric_REBRAND.indd 121 10/29/15 2:18 PM
M122
LViWID M 16 I d bl MIlli C Mill M122 M123 M i REBRANDO b 14 201510 27AM
widia.com
Copy Mills • M270™ Series
P
M
K
N
S
H
Toroidal Inserts
M270 Toroidal
catalogue number W S RR hm
TN2505
TN2510
TN2525
M270TF10R05 10,00 2,38 0,50 0,08
–
3374385
3384424
M270TF10R1 10,00 2,38 1,00 0,08
2095682
–
2638760
M270TF12R05 12,00 3,18 0,50 0,08
–
3374387
3384426
M270TF12R1 12,00 3,18 1,01 0,08
–
3374388
3384427
M270TF12R2 12,00 3,18 2,01 0,08
2095640
–
2638761
M270TF16R03 16,00 4,76 0,30 0,08
–
3374389
3384428
M270TF16R05 16,00 4,76 0,50 0,08
–
3374390
3384429
M270TF16R1 16,00 4,76 1,01 0,08
–
3374391
3384430
M270TF16R2 16,00 4,76 2,02 0,08
–
3374392
3384431
M270TF16R3 16,00 4,76 3,04 0,08
–
–
2638762
M270TF20R03 20,00 4,76 0,30 0,08
–
3375713
–
M270TF20R05 20,00 4,76 0,50 0,08
–
3375714
3384453
M270TF20R1 20,00 4,76 1,01 0,08
–
–
3384454
M270TF20R2 20,00 4,76 2,01 0,08
–
3375716
3384455
M270TF20R4 20,00 4,76 4,02 0,08
–
–
2639023
• Precision insert for nishing and semi-nishing applications.
• Back draft design to minimise vibration and improve surface nishes.
rst choice
alternate choice
M270-TF
NOTE: Ap1 max is equal to RR.
Copy Mills
WID_Master16_IndexableMIlling_CopyMills_M122_M123_Metric_REBRAND.indd 122 10/29/15 2:18 PM
M123
LViWID M 16 I d bl MIlli C Mill M122 M123 M i REBRANDO b 14201510 27AM
widia.com
Copy Mills • M270™ Series
Recommended Starting Speeds
NOTE: FIRST choice starting speeds are in bold type.
As the average chip thickness increases, the speed should be decreased.
Copy Mills
Recommended Starting Speeds [m/min]
Material
Group TN2505 TN2510 TN2525
P
1
550
420
360 660
580
540 550
420
360
2
320
240
205 410
370
330 320
240
205
3
320
240
205 370
330
305 320
240
205
4
–
–
– 275
260
230 –
–
–
5
–
–
– 330
300
275 –
–
–
6
–
–
– 230
205
175 –
–
–
M
1
–
–
– 270
240
210 –
–
–
2
–
–
– 245
210
190 –
–
–
3
–
–
– 190
175
150 –
–
–
K
1
400
300
250 420
360
300 –
–
–
2
540
365
280 360
300
250 –
–
–
3
310
190
155 300
250
200 –
–
–
N
1
–
–
––
–
––
–
–
2
–
–
––
–
––
–
–
3
–
–
––
–
––
–
–
S
1
–
–
––
–
––
–
–
2
–
–
––
–
––
–
–
3
–
–
––
–
––
–
–
4
–
–
––
–
––
–
–
H
1
175
140
95 145
110
70 130
90
60
2
175
140
95 145
110
70 130
90
60
3
140
115
80 115
80
45 –
–
–
NOTE: Use “Light Machining” value as starting feed rate.
Recommended Starting Feeds [mm] Light
Machining
General
Purpose
Heavy
Machining
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
TF 0,12
0,37
0,62 0,09
0,26
0,43 0,06
0,19
0,31 0,06
0,17
0,27 0,05
0,15
0,25 TF
Recommended Starting Feeds
WID_Master16_IndexableMIlling_CopyMills_M122_M123_Metric_REBRAND.indd 123 10/29/15 2:18 PM
M124
LViWID M 16 I d bl MIlli C Mill M124 M125 M i REBRANDO b 14 201510 28AM
widia.com
Copy Mills • M270™ Series
High-Feed Tool Bodies
D1
insert
screw Nm
Torx
driver
12 12748610600 212148788900
16 12748610700 512148099300
20 12748610800 512148099300
Spare Parts
High-Feed • Screw-On End Mills
NOTE: ZU = Effective teeth.
Z = number of pocket seats.
*D1 = 13mm when using M270HF13; D1 = 17mm when using M270HF17.
order number catalogue number D1 D DPM G3X L L2 WF Ap1 max Z Z U insert 1 insert 2* max RPM
coolant
supply kg
3926546 M270TD012M08 12 13 8,5 M8 42 25 10 0,6 1 2 M270HF12 M270HF13 55000 Yes 0,02
3926547 M270TD016M08 16 13 8,5 M8 47 30 10 0,9 1 2 M270HF16 M270HF17 53000 Yes 0,09
3926548 M270TD020M10 20 18 10,5 M10 59 40 14 1,1 1 2 M270HF20 — 52000 Yes 0,07
Copy Mills
• High metal removal rates.
• Excellent in long reach applications.
• Rough and semi-nishing applications.
NOTE: All spare parts except the insert screws must be ordered separately.
WID_Master16_IndexableMIlling_CopyMills_M124_M125_Metric_REBRAND.indd 124 10/29/15 2:18 PM
M125
LViWID M 16 I d bl MIlli C Mill M124 M125 M i REBRANDO b 14201510 28AM
widia.com
Copy Mills • M270™ Series
High-Feed Tool Bodies
Spare Parts
High-Feed • Cylindrical Shanks
NOTE: ZU = Effective teeth.
Z = number of pocket seats.
*D1 = 13mm when using M270HF13; D1 = 17mm when using M270HF17.
order number catalogue number D1 D D3 L L2 Ap1 max Z Z U insert 1 insert 2* max RPM
coolant
supply kg
3926514 M270TD010A10L120 10 10 9 120 45 0,6 1 2 M270HF10 — 57000 Yes 0,06
3926515 M270TD012A12L140 12 12 11 140 50 0,6 1 2 M270HF12 M270HF13 55000 Yes 0,09
3926516 M270TD016A16L160 16 16 14 160 57 0,9 1 2 M270HF16 M270HF17 53000 Yes 0,19
3926517 M270TD020A20L180 20 20 18 180 70 1,1 1 2 M270HF20 — 52000 Yes 0,35
• High metal removal rates.
• Excellent in long reach applications.
• Rough and semi-nishing applications.
D1
insert
screw Nm
Torx
driver
10 12748610500 2,0 12148788900
12 12748610600 2,0 12148788900
16 12748610700 5,0 12148099300
20 12748610800 5,0 12148099300
Copy Mills
NOTE: All spare parts except the insert screws must be ordered separately.
WID_Master16_IndexableMIlling_CopyMills_M124_M125_Metric_REBRAND.indd 125 10/29/15 2:18 PM
M126
LViWID M 16 I d bl MIlli C Mill M126 M127 M i REBRANDO b 14 201510 28AM
widia.com
Copy Mills • M270™ Series
High-Feed Tool Bodies
D1
insert
screw Nm
Torx
driver
10 12748610500 2,0 12148788900
12 12748610600 2,0 12148788900
16 12748610700 5,0 12148099300
20 12748610800 5,0 12148099300
Spare Parts
High-Feed • Carbide Cylindrical Shanks
NOTE: ZU = Effective teeth.
Z = number of pocket seats.
*D1 = 13mm when using M270HF13; D1 = 17mm when using M270HF17.
order number catalogue number D1 D D3 L L2 Ap1 max Z Z U insert 1 insert 2* max RPM
coolant
supply kg
3926518 M270TD010A10L120C 10 10 9 120 45 0,6 1 2 M270HF10 — 57000 Yes 0,11
3926519 M270TD010A10L150C 10 10 9 150 45 0,6 1 2 M270HF10 — 57000 Yes 0,14
3926520 M270TD012A12L120C 12 12 11 120 50 0,6 1 2 M270HF12 M270HF13 55000 Yes 0,15
3926521 M270TD012A12L160C 12 12 11 160 50 0,6 1 2 M270HF12 M270HF13 55000 Yes 0,22
3926522 M270TD016A16L140C 16 16 14 140 57 0,9 1 2 M270HF16 M270HF17 53000 Yes 0,32
3926543 M270TD016A16L180C 16 16 14 180 57 0,9 1 2 M270HF16 M270HF17 53000 Yes 0,44
3926544 M270TD020A20L150C 20 20 18 150 70 1,1 1 2 M270HF20 — 52000 Yes 0,52
3926545 M270TD020A20L200C 20 20 18 200 70 1,1 1 2 M270HF20 — 52000 Yes 0,74
Copy Mills
• High metal removal rates.
• Excellent in long reach applications.
• Carbide shank for higher rigidity.
NOTE: All spare parts except the insert screws must be ordered separately.
WID_Master16_IndexableMIlling_CopyMills_M126_M127_Metric_REBRAND.indd 126 10/29/15 2:18 PM
M127
LViWID M 16 I d bl MIlli C Mill M126 M127 M i REBRANDO b 14201510 28AM
widia.com
Copy Mills • M270™ Series
Inserts
Copy Mills
Insert Selection Guide
Material
Group
Light
Machining
General
Purpose
Heavy
Machining
Geometry Grade Geometry Grade Geometry Grade
P1–P2
HF TN6525
HF TN6540
HF TN6540
P3–P4
HF TN6525
HF TN6540
HF TN6540
P5–P6
HF TN6525
HF TN6540
HF TN6540
M1–M2
HF TN6525
HF TN6540
HF TN6540
M3
HF TN6525
HF TN6540
HF TN6540
K1–K2
HF TN2505
HF TN6525
––
K3
HF TN2505
HF TN6525
––
N1–N2
––
––
––
N3
––
––
––
S1–S2
HF TN6525
HF TN6540
––
S3
HF TN6525
HF TN6540
––
S4
HF TN6525
HF TN6540
HF TN6540
H1
HF TN2505
HF TN2505
HF TN6525
P
M
K
N
S
H
High-Feed
catalogue number W LI S RR RT hm
TN2505
TN6525
TN6540
M270HF10 10,00 10,50 2,38 0,63 1,15 0,08
3903944
4145110
3903943
M270HF12 12,00 12,40 3,18 0,75 1,40 0,08
3903946
4145111
3903945
M270HF13 13,00 12,40 3,18 0,75 1,40 0,08
3903948
4145112
3903947
M270HF16 16,00 16,70 4,76 1,00 1,90 0,08
3903950
4145123
3903949
M270HF20 20,00 20,70 4,76 1,25 2,30 0,08
3903954
4145125
3903953
NOTE: RT = Programming radius.
• High-Feed geometry for roughing and semi- nishing
applications at maximum feed rates.
• Exceptional stability, even when long overhang is required.
rst choice
alternate choice
M270-HF
High-Feed Inserts
WID_Master16_IndexableMIlling_CopyMills_M126_M127_Metric_REBRAND.indd 127 10/29/15 2:18 PM
M128
LViWID M 16 I d bl MIlli C Mill M128 M129 M i REBRANDO b 14 201510 28AM
widia.com
Copy Mills • M270™ Series
Recommended Starting Speeds
NOTE: FIRST choice starting speeds are in bold type.
As the average chip thickness increases, the speed should be decreased.
Copy Mills
Recommended Starting Speeds [m/min]
Material
Group TN2505 TN6525 TN6540
P
1
550
420
360 410
320
280 360
280
240
2
320
240
205 320
250
215 250
190
170
3
320
240
205 280
215
185 215
170
140
4
–
–
– 235
170
145 180
130
110
5
–
–
– 310
235
200 240
180
150
6
–
–
– 205
160
130 160
120
100
M
1
–
–
– 190
120
80 130
80
60
2
–
–
– 120
80
50 80
50
40
3
–
–
– 125
80
55 85
50
40
K
1
400
300
250 275
245
220 220
205
180
2
540
365
280 215
190
180 175
155
140
3
310
190
155 180
160
145 155
145
125
N
1
–
–
––
–
––
–
–
2
–
–
––
–
––
–
–
3
–
–
––
–
––
–
–
S
1
–
–
––
–
–50
35
30
2
–
–
––
–
–25
20
10
3
–
–
––
–
–70
40
30
4
–
–
––
–
–60
30
25
H
1
175
140
95 –
–
––
–
–
2
175
140
95 –
–
––
–
–
3
140
115
80 –
–
––
–
–
Recommended Starting Feeds [mm]
At 0,60 Axial Depth of Cut (ap) • HF10
Light
Machining
General
Purpose
Heavy
Machining
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
HF 1,01
1,57
– 0,67
0,97
1,41 0,48
0,69
0,97 0,42
0,59
0,83 0,38
0,54
0,75 HF
At 0,60 Axial Depth of Cut (ap) • HF12
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
HF 0,91
1,53
2,81 0,61
0,96
1,43 0,45
0,69
0,99 0,39
0,59
0,85 0,35
0,54
0,77 HF
NOTE: Use “Light Machining” value as starting feed rate.
At 0,60 Axial Depth of Cut (ap) • HF13
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
HF 0,94
1,58
2,82 0,64
1,00
1,49 0,46
0,71
1,03 0,40
0,61
0,88 0,37
0,56
0,80 HF
Recommended Starting Feeds
WID_Master16_IndexableMIlling_CopyMills_M128_M129_Metric_REBRAND.indd 128 10/29/15 2:18 PM
M129
LViWID M 16 I d bl MIlli C Mill M128 M129 M i REBRANDO b 14201510 28AM
widia.com
Copy Mills • M270™ Series
Recommended Starting Feeds
Copy Mills
Recommended Starting Feeds [mm]
At 0,90 Axial Depth of Cut (ap) • HF16
Light
Machining
General
Purpose
Heavy
Machining
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
HF 1,03
1,60
3,34 0,69
1,00
1,50 0,50
0,71
1,03 0,43
0,61
0,88 0,39
0,56
0,80 HF
At 0,90 Axial Depth of Cut (ap) • HF17
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
HF 1,06
1,63
3,00 0,71
1,03
1,52 0,51
0,73
1,05 0,44
0,63
0,90 0,40
0,57
0,82 HF
NOTE: Use “Light Machining” value as starting feed rate.
At 1,10 Axial Depth of Cut (ap) • HF20
Insert
Geometry
Programmed Feed per Tooth (fz)
as a % of Radial Depth of Cut (ae) Insert
Geometry5% 10% 20% 30% 40–100%
HF 1,01
1,69
2,74 0,69
1,09
1,57 0,50
0,78
1,10 0,44
0,67
0,94 0,40
0,61
0,86 HF
WID_Master16_IndexableMIlling_CopyMills_M128_M129_Metric_REBRAND.indd 129 10/29/15 2:18 PM
widia.com
M130
LViWID M 16 I d bl MIlli C Mill M130 M131 M i REBRANDN b 12 20158 53AM
Copy Mills • M270™ Series
Additional Application Advice • M270 High-Feed
Applying High-Feed Tools
General Programming Information for Applying M270 High-Feed
Ap1 max
Rt
Recommended when long overhang is
necessary due to lower radial forces.
Maximum L/D ratio of 10 x D.
Small Ap1 values and higher feed rate
generate lower cutting forces versus
traditional milling strategies.
For CAM programming, the tools can be
programmed as a toroidal tool type by
using the Rt value as the insert radius.
NOTE: Use two effective teeth for feed calculations.
For materials above 45 HRC, we recommend adjusting the ae max to 55% of cutting diameter and using no more than 50% of Ap1 max.
While centre cutting is possible, we recommend using a ramp angle of 0.5°–1.0° to ensure smooth operation.
tool diameter Ø10 Ø12 Ø13 Ø16 Ø17 Ø20
recommended starting Ap1 (mm) 0,40 0,40 0,40 0,60 0,60 0,75
Rt
CAM programming 1,15 1,40 1,40 1,90 1,90 2,30
fz
recommended for general purpose 0,45 0,55 0,55 0,60 0,60 0,70
fz
recommended for 45 HRC (approx.) 0,40 0,45 0,45 0,55 0,55 0,65
fz
recommended for 55 HRC (approx.) 0,30 0,35 0,35 0,45 0,45 0,50
L/D ratio
% of Ap1 max
to reduce
% of vc
to reduce
<4 0% 0%
4<L/D<7 55–65% 10–15%
>8 65–75% 20–30%
The high-feed concept bases its strategy in small depth of cut and high fz
values, which results in a higher MRR and productivity with low radial forces.
WID_Master16_IndexableMIlling_CopyMills_M130_M131_Metric_REBRAND.indd 130 11/12/15 8:55 AM
ToolBOSS vending solutions help to reduce costs and improve
effi ciencies to give you a competitive edge.
ToolBOSS Vending Solutions
For more information, please contact us at:
Tel: 888 281 8080
na-help.desk@toolboss.com
toolboss.com
Customer Offering
Shared Rewards
Free use of ToolBOSS vending machine combined with a
comprehensive maintenance and service package based
on agreed sales targets for specifi ed contract terms.
Direct Purchase of Equipment
ToolBOSS vending machines are available for purchase.
Maintenance and service packages available with
annual agreements.
ToolBOSS™
• Cut tooling inventory by 50% or more.
• Decrease spending on tooling by up to 30%.
• Reduce administrative costs by as much as 90%.
You can also use our NOVO app to guide you
to the correct choice!
For more information, please visit widia.com/novo.
NOVO: The Digital Source for Delivering
Smart Machining Solutions
For more information, contact your local WIDIA
Authorised Distributor or visit widia.com/services.
WID_Master16_IndexableMIlling_CopyMills_M130_M131_Metric_REBRAND.indd 131 11/12/15 8:55 AM
LViWID M 16 S lidE dMilli S i I N000 N001 M i REBRANDN b 12 20158 25AMLViWID M 16 S lidE dMilli S i I N000 N001 M i REBRANDN b 12 20158 25AMLViWID M 16 S lidE dMilli S i I N000 N001 M i REBRANDN b 12 20158 25AM
WID_Master16_SolidEndMilling_SectionIntro_N000_N001_Metric_REBRAND.indd 2 11/12/15 9:54 AM
widia.com
L V i WID M 16 S lidE dMilli S i I N000 N001 M i REBRANDN b 1220158 25AM
N1
Solid End Milling Introduction .......................................................................................................................... N2–N21
High-Performance Solid Carbide End Mills ..................................................................................................O1–O212
General Purpose Solid Carbide End Mills ........................................................................................................P1–P44
High-Performance High-Speed Steel (HSS-E/PM) ......................................................................................... Q1–Q13
Burs ..................................................................................................................................................................... R1–R18
Solid End Milling
WID_Master16_SolidEndMilling_SectionIntro_N000_N001_Metric_REBRAND.indd 3 11/12/15 9:54 AM
N2
LViWID M 16 S lidE dMilli S i I N002 N003 M i REBRANDN b 10 20153 39PM
widia.com
Solid Carbide End Mills
How to Choose the Correct End Mill
End Mills
Fine Finishing Finishing Roughing Slot Milling Plunging
Contour
Milling
Peel
Milling
Trochoidal
Milling
end mill
Z = 1
end mill
Z = 2
end mill
Z = 3
end mill
Z = 4/5
multi-ute cutter
Z = 6-8
Ball Nose and Torus End Mills
ball nose end mill
Z = 2
ball nose end mill
Z = 4
Always select a tool with the shortest possible ute length whenever possible.
This will increase the stability of the tool and give the best results.
When selecting an end mill, the following machining factors will affect
your selection of the correct end mill for your application:
1. Tool overhang.
2. Coolant ow.
3. Machine and setup stability.
4. Machine power and torque.
5. Material to be machined.
6. Machine adaptor size (CV40, CV50, HSK63, etc.).
7. See Tool Reference Guides on pages N6–N15.
rst choice
suitable with limitations
not recommended
*VariMill
™
/VariMill
™
GP Only
*
Z = number of teeth
WID_Master16_SolidEndMilling_SectionIntro_N002_N003_Metric_REBRAND.indd 2 11/11/15 9:37 AM
N3
LViWID M 16 S lidE dMilli S i I N002 N003 M i REBRANDN b 1020153 39PM
widia.com
Recommended End Mill Series
Solid Carbide End Mills
Recommended Series
Materials PMKN SH
Page
Reference
Steels &
Alloyed Steels
Stainless
Steel
Cast
Iron Non-Ferrous
High-Temp
Alloys &
Titanium
Hardened
Materials
012345612312312345612341234
Roughing
DQ13 O54
4U40, 4U70 O59–O60
X-Feed
™
70N6 O152
X-Feed 70N7 O153
4909, 4979 O140–O141
Semi-Finishing
VariMill I
™
— 4777 O4–O5
VariMill II
™
— 577C O24
VariMill II ER — 577E O32
VariMill III
™
ER — 771E, 772E O45
Vision Plus
™
— 7505 O180–O181
AluSurf
™
5102, 5103 O126–O127
Finishing
D507, D517, D518 O92, O95
7515, 7525 O180–O181
VariMill III ER — 77NE, 771E, 772E O44–O45
AluSurf 5102, 5103 O126–O127
Finishing Pockets
VariMill I — 4777 O4–O5
VariMill II — 57NC O25–O26
VariMill II ER — 57NE O33
VariMill III ER — 77NE O44
75N5, 75N8 O184–O186
AluSurf 51N3 O128
Long Wall Milling
VariMill II Long — 5718 O38–O39
VariMill III ER — 772E O45
3D Ball Nose
VariMill I — 47N0 O12
7050, 7060 O189
HPC/Peel Milling
VariMill I — 4777, 4778 O4–O6
VariMill II — 577C O24
VariMill II ER — 577E O32
VariMill II Long — 5718 O38–O39
VariMill III ER — 77NE, 771E, 772E O44–O45
AluSurf 5102, 5103 O126–O127
Trochoidal Milling
VariMill I — 4777, 4778 O4–O6
VariMill II — 577C O24
VariMill II ER — 577E O32
VariMill III ER — 771E, 772E O45
AluSurf 5102, 5103 O126–O127
Type of Cut
WID_Master16_SolidEndMilling_SectionIntro_N002_N003_Metric_REBRAND.indd 3 11/11/15 9:37 AM
N4
LViWID M 16 S lidE dMilli S i I N004 N005 M i REBRANDN b 12 20158 26AM
widia.com
High-Performance Solid Carbide End Mills
WIDIA™ Milling Portfolio Overview
Best Selection Per Application
HP Roughers
MRR, Tool Life, Chip Management, etc.
Roughing Roughing/Finishing combined
MRR, Tool Life, Surface Quality, Accuracy, etc.
HP Finishers
HP Capability
GP Multipurpose
Finishing
Materials
Best Selection For Trochoidal/High-Speed Machining Concepts
VariMill™
VariMill II™
VariMill II™ ER
VariMill III™ ER
VariMill II™ Long
Multiple Materials
Fine
Finishing
Trochoidal
Milling Finishing
Semi-
Finishing Roughing
Speci c Materials
WID_Master16_SolidEndMilling_SectionIntro_N004_N005_Metric_REBRAND.indd 4 11/12/15 9:55 AM
N5
LViWID M 16 S lidE dMilli S i I N004 N005 M i REBRANDN b 1220158 26AM
widia.com
Solid Carbide End Mills
Technical Information
Recommended Adaptors per End Mill Platform
Select Adaptor per Technical Data/Characteristics
Technical data/characteristics
Toolholders
HydroForce
high torque Shrink Fit
Milling
chuck
ER
collet chuck
Weldon
®
adaptor
torque transmission
radial runout (T.I.R.)
1
radial rigidity
2
tool length adjustment
tool shank tolerance requirement
through coolant
minimum quantity lubrication (MQL)
dampening capability
shank diameter range
3
cost of toolholder
low requirement of external devices
4
ease of handling
dust resistance
high-speed capability
balancing accuracy
1
Radial runout may affect tool life.
2
Radial rigidity for Weldon holder is low at a direction perpendicular to the screw.
3
Accepts different shank diameters through the use of reduction sleeves or due to collapse range.
4
Collet chucks and milling chucks may require the use of a torque or special wrench; Shrink Fit adaptor requires a shrinking unit.
SCEM Platform
Recommended Adaptors
First Choice Alternate Choice
VariMill I
™
HydroForce
™
Shrink Fit
VariMill II
™
/VariMill II
™
ER HydroForce Shrink Fit
VariMill III
™
ER HydroForce Shrink Fit
VariMill II
™
Long HydroForce Shrink Fit
High-Performance Finishers HydroForce Shrink Fit
High-Performance Roughers HydroForce Weldon Adaptor
AluSurf
™
/Arcut
™
/Aluminium Tools HydroForce Shrink Fit
VisionPlus
™
/VisionPlus X-Feed
™
HydroForce Shrink Fit
VariMill GP Shrink Fit Weldon Adaptor
HSS/WavCut
™
Weldon Adaptor —
WID_Master16_SolidEndMilling_SectionIntro_N004_N005_Metric_REBRAND.indd 5 11/12/15 9:55 AM
N6
LViWID M 16 S lidE dMilli S i I N006 N007 M i REBRANDD b 8 20152 56PM
widia.com
High-Performance Solid Carbide End Mills • Roughing
DQ13 3–20 3 Yes X
49H6 8–20 3/4 Yes X
422152/422150 6–25 4 Yes X
4976 4–25 3/4/5 Yes X
422824/422820 6–25 4 Yes X
4U40 6–25 4/6 Yes X
4U70 6–25 4/6 Yes X
49N6 4–25 3/4/5 Yes X
4969 5–20 3/4 Yes X
422813/022813 6–25 3 Yes X X
422818 6–20 4 Yes X X
422846 6–25 4/6 Yes X X
4906 4–25 3/4/5 Yes X X
4966 5–25 3/4 Yes X X
Solid End Milling
Tool Reference Guide • Metric
Series
Range of Diameter
Ø min– Ø max
mm
Number
of Flutes
Cutting
Centre
Uncoated
TiCN
AlTiN
TiAlN
DCL TiB2
Diamond
PCD
rst choice
alternate choice
High-Performance Solid Carbide End Mills • VariMill
™
VariMill I
™
4777 4–25 4 Yes X
4778 4–25 4 Yes X
4717 6–20 4 Yes X
4727 12–20 4 Yes X
47N7 ALTIN 4–20 4 Yes X
47N7 TIALN 4–20 4 Yes X
47N6 6–20 4 Yes X
47N0 5–20 4 Yes X
VariMill II
™
577C 4–25 5 Yes X
57NC 6–25 5 Yes X
VariMill II
™
ER
577E 10–25 5 Yes X
57NE 10–25 5 Yes X
VariMill II
™
Long
5718 6–25 5 No X
VariMill III
™
ER
77NE 10–20 7 Yes X
771E/772E 10–20 7 Yes X
WID_Master16_SolidEndMilling_SectionIntro_N006_N007_Metric_REBRAND.indd 6 12/8/15 2:56 PM
N7
LViWID M 16 S lidE dMilli S i I N006 N007 M i REBRANDD b 820152 56PM
widia.com
Solid End Milling
Tool Reference Guide • Metric
PMKN S H
Page References
1 2 3 4 5 6 1 2 3 1 2 3 1 2 3 4 5 6 1 2 3 4 1 2 3 4
Steel <35 HRC
Steel >36–48 HRC
PH and Ferritic
Stainless Steel
<35 HRC
PH and Ferritic
Stainless Steel
>35 HRC
Stainless Steel
Cast Iron
Non-Ferrous
Graphite
Iron Based
Nickel Based
Pure Titanium
Titanium
Alloys
Hardened Steels
H1 = <48 HRC
H2 = 48–55
H3 = 56–60 HRC
H4 = >60 HRC
Product
Information Cutting Data
High-Performance Solid Carbide End Mills • VariMill
™
(continued)
VariMill I
™
(continued)
O4–O5 O13
O6 O14
O7 O15
O8 O16
O9–O10 O17
O9–O10 O18
O11 O19
O12 O20
VariMill II
™
(continued)
O24 O27
O25–O26 O28
VariMill II
™
ER (continued)
O32 O34
O33 O35
VariMill II
™
Long (continued)
O38–O39 O40
VariMill III
™
ER (continued)
O44 O46
O45 O47–O48
High-Performance Solid Carbide End Mills • Roughing (continued)
O54 O68
O55 O69
O56 O70
O57 O71
O58 O72
O59 O73
O60 O74
O61 O75
O62 O76
O63 O77
O64 O78
O65 O79
O66 O80
O67 O81
WID_Master16_SolidEndMilling_SectionIntro_N006_N007_Metric_REBRAND.indd 7 12/8/15 2:56 PM
N8
LViWID M 16 S lidE dMilli S i I N008 N009 M i REBRANDO b 20 20153 23PM
widia.com
Solid End Milling
Tool Reference Guide • Metric
rst choice
alternate choice
High-Performance Solid Carbide End Mills • Finishing
4001 JJ 1–20 2 Yes X
D503/D513 2–20 3 Yes X X X
DC03 3–20 3 Yes X
4503 JJ 1–20 3 Yes X
422802/322802/022802 2–20 3 Yes X X X
4603 3–20 3 Yes X
D507/D517 6–20 6 Yes X
422826/422822 6–25 6/8 No X
422827 6–25 6/8 No X
D518 4–25 4/6/8 Yes X
026621 8–20 4/6/8 No X
024112 6–10 2 Yes X
024111 2–12 2 Yes X
High-Performance Solid Carbide End Mills • Micro End Mills
423007/023007 0,4–3,0 2 Yes X X
4632 0,4–2,0 2 Yes X X
4633 0,4–3,0 3 Yes X X
4651 1,0–2,0 2 Yes X X X
High-Performance Solid Carbide End Mills • Aluminium
AluSurf
™
5102 1,5–20 2 Yes X
5103 3–20 3 Yes X
51N3 6–20 3 Yes X
High-Performance Aluminium
524149 3–12 1 Yes X
022849 2–12 1 Yes X
D502 3–20 2 Yes X X
022814/022817 4–20 2 Yes X
4102 1,0–20 2 Yes X
524152/022852 3–16 2 Yes X X
024101 6–10 2 Yes X
4103 3–20 3 Yes X X
Series
Range of Diameter
Ø min– Ø max
mm
Number
of Flutes
Cutting
Centre
Uncoated
TiCN
AlTiN
TiAlN
DCL TiB2
Diamond
PCD
WID_Master16_SolidEndMilling_SectionIntro_N008_N009_Metric_REBRAND.indd 8 10/30/15 2:17 PM
N9
LViWID M 16 S lidE dMilli S i I N008 N009 M i REBRANDO b 2020153 23PM
widia.com
Solid End Milling
Tool Reference Guide • Metric
High-Performance Solid Carbide End Mills • Finishing (continued)
O84 O99
O85 O100–O101
O86 O102
O87 O103
O88–O90 O104
O91 O105
O92 O106–O107
O93 O108
O94 O109
O95 O110
O96 O111
O97 O112
O98 O113
High-Performance Solid Carbide End Mills • Micro End Mills (continued)
O116 O120
O117 O121
O118 O122
O119 O123
High-Performance Solid Carbide End Mills • Aluminium (continued)
AluSurf
™
(continued)
O126 O129
O127 O129
O128 O129
High-Performance Aluminium (continued)
O132 O144
O133 O144
O134 O144
O135 O145
O136 O145
O137 O146
O138 O146
O139 O147
PMKN S H
Page References
1 2 3 4 5 6 1 2 3 1 2 3 1 2 3 4 5 6 1 2 3 4 1 2 3 4
Steel <35 HRC
Steel >36–48 HRC
PH and Ferritic
Stainless Steel
<35 HRC
PH and Ferritic
Stainless Steel
>35 HRC
Stainless Steel
Cast Iron
Non-Ferrous
Graphite
Iron Based
Nickel Based
Pure Titanium
Titanium
Alloys
Hardened Steels
H1 = <48 HRC
H2 = 48–55
H3 = 56–60 HRC
H4 = >60 HRC
Product
Information Cutting Data
WID_Master16_SolidEndMilling_SectionIntro_N008_N009_Metric_REBRAND.indd 9 10/30/15 2:17 PM
N10
LViWID M 16 S lidE dMilli S i I N010 N011 M i REBRANDN b 12 20158 30AM
widia.com
Solid End Milling
Tool Reference Guide • Metric
rst choice
alternate choice
High-Performance Aluminium (continued)
4909 6–25 3 Yes X
4979 6–25 3 Yes X X
49N9 6–20 3 Yes X
49G9 8–25 3 Yes X
High-Performance Solid Carbide End Mills • Hard Materials
VisionPlus
™
X-Feed
™
70N6/71N6 6–20 6 No X
70N7 6–20 6 No X
VisionPlus
™
Micro
7N02/7N12/7N22 0,3–3,1 2 Yes X X
423034 0,5–3,0 2 Yes X
7N01 0,3–6,0 2 Yes X X
7N21 0,5–3,0 2 Yes X
VisionPlus
™
75N2 3–12 2 Yes X
422875 2–12 2 Yes X
7151 1–20 2 Yes X
7061 1–12 2 Yes X
70N1 1–12 2 Yes X
422869/422868 1–16 2 Yes X
422870 2–12 2 Yes X
422873 6–10 2 Yes X
7505/7545/7515/7525 3–25 4/5/6 Yes X
7585/7595 3–25 4/5 Yes X
75N5 3–25 4/5 Yes X
75N8 6–12 6 Yes X
422876/422878 4–12 4 Yes X
7150 2–20 4 Yes X
7050/7060 2–20 4 Yes X
422871 3–10 4 Yes X
D618 3–20 4/6 Yes X
422837/422831 6–25 6/8 No X
7670 4–25 3/4/6 Yes X
Series
Range of Diameter
Ø min– Ø max
mm
Number
of Flutes
Cutting
Centre
Uncoated
TiCN
AlTiN
TiAlN
DCL TiB2
Diamond
PCD
WID_Master16_SolidEndMilling_SectionIntro_N010_N011_Metric_REBRAND.indd 10 11/12/15 9:55 AM
N11
LViWID M 16 S lidE dMilli S i I N010 N011 M i REBRANDN b 1220158 30AM
widia.com
Solid End Milling
Tool Reference Guide • Metric
High-Performance Aluminium (continued)
O140 O147
O141 O148
O142 O148
O143 O149
High-Performance Solid Carbide End Mills • Hard Materials (continued)
VisionPlus
™
X-Feed
™
(continued)
O152 O154
O153 O155
VisionPlus
™
Micro (continued)
O160–O163 O167
O164 O168
O165 O169
O166 O170
VisionPlus
™
(continued)
O172 O194
O173 O194
O174 O195
O175 O195
O176 O196
O177 O196
O178 O197
O179 O197
O180–O181 O198–O199
O182–O183 O199
O184–O185 O200
O186 O200
O187 O201
O188 O201
O189 O202
O190 O202
O191 O203
O192 O203
O193 O204
PMKN S H
Page References
1 2 3 4 5 6 1 2 3 1 2 3 1 2 3 4 5 6 1 2 3 4 1 2 3 4
Steel <35 HRC
Steel >36–48 HRC
PH and Ferritic
Stainless Steel
<35 HRC
PH and Ferritic
Stainless Steel
>35 HRC
Stainless Steel
Cast Iron
Non-Ferrous
Graphite
Iron Based
Nickel Based
Pure Titanium
Titanium
Alloys
Hardened Steels
H1 = <48 HRC
H2 = 48–55
H3 = 56–60 HRC
H4 = >60 HRC
Product
Information Cutting Data
WID_Master16_SolidEndMilling_SectionIntro_N010_N011_Metric_REBRAND.indd 11 11/12/15 9:55 AM
N12
LViWID M 16 S lidE dMilli S i I N012 N013 M i REBRANDO b 20 20153 26PM
widia.com
VariMill
™
GP • 2-Flute
D002/D012 2–20 2 Yes X X
2819 3–20 2 Yes X X
4002/4012 1–20 2 Yes X
D001/D011 2–20 2 Yes X
2838 2–20 2 Yes X X
4001/4011/4021 1–20 2 Yes X X
VariMill GP • 4-Flute
D004/D014 2–20 4 Yes X X
2528 4–20 4 Yes X X
4004/4014/4024 1–20 4 Yes X X
D010 3–20 4 Yes X X
2848 4–20 4 Yes X X
4000/4010 2–20 4 Yes X
Solid End Milling
Tool Reference Guide • Metric
rst choice
alternate choice
General Purpose Solid Carbide End Mills •Roughing/Finishing
NINA
™
423002/323002/
423001/323001 2–12 3 Yes X X
423004/423003 4–12 4 Yes X
423048/423047 2–12 2 Yes X
423039/423038 2–12 2 Yes X
423036/423037 6–10 4 No X X
Series
Range of Diameter
Ø min– Ø max
mm
Number
of Flutes
Cutting
Centre
Uncoated
TiCN
AlTiN
TiAlN
DCL TiB2
Diamond
PCD
WID_Master16_SolidEndMilling_SectionIntro_N012_N013_Metric_REBRAND.indd 12 10/30/15 2:17 PM
N13
LViWID M 16 S lidE dMilli S i I N012 N013 M i REBRANDO b 2020153 26PM
widia.com
Solid End Milling
Tool Reference Guide • Metric
General Purpose Solid Carbide End Mills •Roughing/Finishing (continued)
NINA
™
(continued)
P4 P9
P5
P9
P6 P10
P7 P10
P8 P11
VariMill
™
GP • 2-Flute (continued)
P14–P15 P23
P16
P23
P17–P18 P23–P24
P19 P25
P20
P25
P21–P22 P25–P26
VariMill GP • 4-Flute (continued)
P32–P33 P40–P41
P34 P41
P35–P36 P40–P41
P37 P42
P38 P42
P39 P42–P43
PMKN S H
Page References
1 2 3 4 5 6 1 2 3 1 2 3 1 2 3 4 5 6 1 2 3 4 1 2 3 4
Steel <35 HRC
Steel >36–48 HRC
PH and Ferritic
Stainless Steel
<35 HRC
PH and Ferritic
Stainless Steel
>35 HRC
Stainless Steel
Cast Iron
Non-Ferrous
Graphite
Iron Based
Nickel Based
Pure Titanium
Titanium
Alloys
Hardened Steels
H1 = <48 HRC
H2 = 48–55
H3 = 56–60 HRC
H4 = >60 HRC
Product
Information Cutting Data
WID_Master16_SolidEndMilling_SectionIntro_N012_N013_Metric_REBRAND.indd 13 10/30/15 2:17 PM
N14
LViWID M 16 S lidE dMilli S i I N014 N015 M i REBRANDO b 20 20153 26PM
widia.com
Solid End Milling
Tool Reference Guide • Metric
Series
Range of Diameter
Ø min– Ø max
mm
Number
of Flutes
Cutting
Centre
Uncoated
TiCN
AlTiN
TiAlN
DCL TiB2
Diamond
PCD
rst choice
alternate choice
High-Performance High-Speed Steel (HSS-E-PM) • Roughing
WavCut
™
664W/660W/661W 25–50 5/6/8 Yes X
High-Performance High-Speed Steel
6N06 6–30 4/5/6 Yes X
6N70 6–32 4/6 Yes X
6NL6 10–25 4/6 Yes X
High-Performance HSS-E/PM End Mills • Finishing
1N0M JJ 3–22 4 Yes X
1N77 6–30 4 Yes X
WID_Master16_SolidEndMilling_SectionIntro_N014_N015_Metric_REBRAND.indd 14 10/30/15 2:17 PM
N15
LViWID M 16 S lidE dMilli S i I N014 N015 M i REBRANDO b 2020153 26PM
widia.com
High-Performance High-Speed Steel (HSS-E-PM) • Roughing (continued)
WavCut
™
(continued)
Q4 Q10
High-Performance High-Speed Steel (continued)
Q5 Q10
Q6 Q11
Q7 Q11
High-Performance HSS-E/PM End Mills • Finishing (continued)
Q8 Q12
Q9 Q13
Solid End Milling
Tool Reference Guide • Metric
PMKN S H
Page References
1 2 3 4 5 6 1 2 3 1 2 3 1 2 3 4 5 6 1 2 3 4 1 2 3 4
Steel <35 HRC
Steel >36–48 HRC
PH and Ferritic
Stainless Steel
<35 HRC
PH and Ferritic
Stainless Steel
>35 HRC
Stainless Steel
Cast Iron
Non-Ferrous
Graphite
Iron Based
Nickel Based
Pure Titanium
Titanium
Alloys
Hardened Steels
H1 = <48 HRC
H2 = 48–55
H3 = 56–60 HRC
H4 = >60 HRC
Product
Information Cutting Data
WID_Master16_SolidEndMilling_SectionIntro_N014_N015_Metric_REBRAND.indd 15 10/30/15 2:17 PM
N16
LViWID M 16 S lidE dMilli S i I N016 N017 M i REBRANDN b 10 201512 46PM
widia.com
Coatings provide high-speed
capability and are engineered
for roughing to fi nishing.
High-Performance Solid Carbide End Mills
PSteel
MStainless Steel
KCast Iron
NNon-Ferrous
SHigh-Temp Alloys
HHardened Materials
Grades and Grade Descriptions
wear
resistance toughness
Coating Grade Description 05 10 15 20 25 30 35 40 45
Grade
Uncoated,
Unocoated -WW, -JJ
Carbide grade made from high-quality, micrograin materials for cutting all types
of workpiece materials. Very high toughness ensures a controlled wear rate.
The micrograin structure enables extremely sharp cutting edges.
P
M
K
N
S
WP15PE
Coated carbide grade with thick PVD coating and optimised chemistry and process
for increased wear resistance. Outstanding protection in milling of steels to mitigate
crater, DOCN (depth-of-cut notching), and ank wear. Excellent performance up
to 52 HRC.
P
M
K
WS15PE
PVD coated carbide grade with optimised chemistry and process for increased wear
resistance. State-of-the art post-coat treatment reduces friction and helps manage
heat when cutting super alloys.
S
H
TiAlN-LT1, -LW1
Ultra- ne grain carbide grade with TiAlN PVD multilayer coating for high-performance
machining of most materials. This grade is especially designed for dry milling
hardened steels due to its unique combination of a high hardness substrate and
tough multilayer coating.
P
H
TiN-TT, -TW
This TiN PVD coated grade offers well-balanced machining performance for general
purpose applications. This grade offers great versatility at intermediate Metal Removal
Rates (MRR).
P
M
K
N
S
TiAlN-RT1, -RW1
Ultra- ne carbide grade with TiAlN PVD coating. This grade is a high-performance
grade for nishing operations, especially for hardened steels. This grade is
characterised by high hardness and wear resistance.
P
H
TiCN-CT, -CW, -CJ
General purpose coated carbide grade with TiCN PVD coating for use at intermediate
cutting speeds. For universal use due to its high wear resistance and hardness. Only
use wet or with MQL (Minimum Quantity Lubrication).
P
M
K
N
H
WID_Master16_SolidEndMilling_SectionIntro_N016_N017_Metric_REBRAND.indd 16 11/10/15 2:20 PM
N17
LViWID M 16 S lidE dMilli S i I N016 N017 M i REBRANDN b 10201512 46PM
widia.com
Coatings provide high-speed
capability and are engineered
for roughing to fi nishing.
PSteel
MStainless Steel
KCast Iron
NNon-Ferrous
SHigh-Temp Alloys
HHardened Materials
wear
resistance toughness
Coating Grade Description 05 10 15 20 25 30 35 40 45
Grade
TiAlN-LT, -LW
Coated carbide grade with PVD multilayer coating. This grade is designed for
dry milling most types of material, apart from the hardened variety. This grade is
characterised by excellent toughness and wear resistance. It provides outstanding
protection against cratering and abrasion.
P
M
K
S
High-Performance Solid Carbide End Mills
Grades and Grade Descriptions
TiAlN-RT, -RW,-RJ
Universal carbide grade with TiAlN PVD coating. This grade is a high-performance
grade for nishing operations and is characterised by high hardness and
wear resistance.
P
M
K
S
AlTiN-MT1,
-MW1, -MJ1
AlTiN PVD coated ultra- ne carbide grade. The combination between hard substrate
and wear-resistant coating provides outstanding performance in high-feed milling of
hardened materials (58–65 HRC).
H
AlTiN-MT, -MW
Coated ne-grain grade with AlTiN PVD coating. This grade is a thin, hard PVD
coating particularly suitable for cutting steel, cast iron, stainless steel (wet), and
titanium (wet) with high metal removal rates. This grade can be used for materials
with hardness up to 52 HRC.
P
M
K
S
KC10F
High-quality submicron carbide grade for high-performance machining of non-ferrous
alloys. Excellent toughness ensures a controlled wear rate and the submicron structure
enables extremely sharp cutting edges. N
K30F-DCF
Coated carbide grade with PVD multilayer coating. K30F-DCF is designed for
dry milling most types of material, apart from the hardened variety. This grade is
characterised by excellent hardness and wear resistance. It provides outstanding
protection against cratering and abrasion.
P
M
K
K30F-TiCN
General purpose coated carbide grade with TiCN PVD coating for use at intermediate
cutting speeds. For universal use due to its high wear resistance and hardness. Only
use wet or with MQL (Minimum Quantity Lubrication).
P
M
K
N
WID_Master16_SolidEndMilling_SectionIntro_N016_N017_Metric_REBRAND.indd 17 11/10/15 2:20 PM
N18
LViWID M 16 S lidE dMilli S i I N018 N019 M i REBRANDN b 12 20158 35AM
widia.com
• Innovative edge preparation providing consistent tool life by eliminating
most edge microchipping caused by grinding.
• Advanced post-coat fi nish reducing chip build-up and improving chip fl ow.
• First-time use of Victory Grade nomenclature for better identifi cation
of grades.
• Centre cutting addition on VariMill II™.
Features and Benefi ts
Victory
Victory™ Grades for High-Performance
Solid Carbide End Mills
WIDIA™ has taken the next step in solid carbide end mill innovation by introducing the
Victory™ Grades WP15PE™ and WS15PE™. Victory combines state-of-the-art surface
treatments and proprietary edge technology with the successful market-leading WIDIA
geometries, delivering signifi cant improvement to tool life and Metal Removal Rates (MRR).
The new Victory Grades can be found across the entire high-performance offering, which
includes the VariMill™ family, high-performance roughers, and high-performance fi nishers.
WID_Master16_SolidEndMilling_SectionIntro_N018_N019_Metric_REBRAND.indd 18 11/12/15 9:55 AM
N19
LViWID M 16 S lidE dMilli S i I N018 N019 M i REBRANDN b 1220158 35AM
widia.com
Surface
Conventional End Mill
Surface
Victory™ End Mill
View: 1st and 2nd relief
Eliminates sharp corner for superior coating adhesion
Eliminates grinding damage
Innovative Advantage of Victory
™
Grades
The new Victory grades are spread across the high-performance offering, including
high-performance roughers, high-performance nishers, and select VariMill
™
platforms.
WP15PE™WS15PE™
W = WIDIA
™
W = WIDIA
P = Steels S = High-Temp Alloys
15 = Application Range (Medium to Roughing) 15 = Application Range (Medium to Roughing)
P = Carbide + PVD P = Carbide + PVD
E = Solid End Mills E = Solid End Mills
Primary Materials Primary Materials
P0 through P4 Steels S1 through S4 High-Temp Alloys
M1 through M3 Austenitic Stainless Steels P5 through P6 Ferritic and Martensitic Stainless Steels
K1 through K3 Cast Irons H1 Hardened Steels
H1 Hardened Steels
Secondary Materials Secondary Materials
S1 through S4 High-Temp Alloys M1 through M3 Austenitic Stainless Steels
H2 Hardened Steels H2 Hardened Steels
Metric series
Victory Grade rst choice
alternate choice
WP15PE WS15PE PMKNSH
VariMill I
™
477, 47N0
VariMill II
™
577C
VariMill II
™
57NC
VariMill II
™
ER 577E, 57NE
HP Roughers DQ13, 4976, 4U40, 4U70
HP Finishers 4001JJ, 4503JJ, D507, D518
9
9
99
9
9
WID_Master16_SolidEndMilling_SectionIntro_N018_N019_Metric_REBRAND.indd 19 11/12/15 9:55 AM
N20
LViWID M 16 S lidE dMilli S i I N020 N021 M i REBRANDJ 6 20168 48AM
widia.com
WIDIA™ Victory™
Catalogue Numbering System
Each character in our catalogue number signi es a speci c trait
of that product. Use the following key columns and corresponding
images toeasily identify which attributes apply.
How do the new Victory Catalogue numbers work?
OLD Grade Nomenclature • Metric
Series Number
5 77 7 250
Series Cutting
Diameter
5 = 5-Flute Carbide
4 = 4-Flute Carbide
010
= 1mm
020
= 2mm
030
= 3mm
040
= 4mm
050
= 5mm
060
= 6mm
070
= 7mm
080
= 8mm
090
= 9mm
100
= 10mm
120
= 12mm
140
= 14mm
160
= 16mm
180
= 18mm
200
= 20mm
250
= 25mm
320
= 32mm
Series Number
577 C 250 0 8 W
Series Special
Designation
Cutting
Diameter
Corner
Condition
Shank
Diameter
Shank
Style
5= 5-Flute Carbide C= Centre Cutting 010 = 1mm 0 & Z = Sharp 2= 6mm T= Plain
4= 4-Flute Carbide 020 = 2mm 1= 0,75 3= 8mm W= Weldon
®
030 = 3mm 2= 0,50 4= 10mm V=
SAFE-hOCK®
040 = 4mm 3= 1,00 5= 12mm
050 = 5mm 4= 1,50 6= 16mm
060 = 6mm 5= 2,00 7= 20mm
070 = 7mm 6= 2,50 8= 25mm
080 = 8mm 7= 3,00 9= 32mm
090 = 9mm 8= 4,00
100 = 10mm
120 = 12mm
140 = 14mm
160 = 16mm
180 = 18mm
200 = 20mm
250 = 25mm
320 = 32mm
NEW Victory Nomenclature • Metric
WID_Master16_SolidEndMilling_SectionIntro_N020_N021_Metric_REBRAND.indd 20 1/6/16 8:48 AM
N21
LViWID M 16 S lidE dMilli S i I N020 N021 M i REBRANDN b 1220158 38AM
widia.com
By referencing this easy-to-use guide, you can
identify the correct product to meet your needs.
OLD Grade Nomenclature • Metric
08M W
Corner
Condition
Shank
Diameter
Grade Shank
Style
0
= Sharp
2
= 6mm L= TiAlN T= Plain
1
= Radius
3
= 8mm M= AlTiN W= Weldon
®
4
= 10mm C= TiCN J= JIS
5
= 12mm R= TiAlN
6
= 16mm J= Uncoated
7
= 20mm
8
= 25mm
9
= 32mm
WIDIA™ Victory™
Catalogue Numbering System
WP15PE
Brand ISO
Material Code
Wear
Range
Coating
Type
Product
Family
WIDIA
™
P= Steel 15 = High Wear P= PVD E= End Mill
S= High-Temperature
Alloys
NEW Victory Nomenclature • Metric
WID_Master16_SolidEndMilling_SectionIntro_N020_N021_Metric_REBRAND.indd 21 11/12/15 9:55 AM
LViWID M 16 S lidE dMilli S i I N022 N023 M i REBRANDN b 13 20151 36PM
WIDIA™ Reconditioning Services Optimise the Total Value
of Metalcutting Tools Throughout Their Entire Life
• Local support you can trust.
• Rapid turnaround to minimise inventory.
• Like-new performance continues delivering productivity.
• Application support throughout the tool lifecycle.
• WIDIA proprietary geometry specifi cations after each regrind.
• WIDIA certifi ed coatings.
• Easy logistics through the reconditioning process.
WIDIA Reconditioning Services optimise the value of metalcutting tools throughout their entire lifecycle by
giving like-new performance — with rapid turnaround time — so tools are always on hand and perform
just like new.
Simple Logistics
Our unique reconditioning program simplifi es sending and receiving reconditioned
tools to reduce shipping time and increase on-hand inventory.
To use WIDIA tool reconditioning services, contact your authorised
WIDIA distributor to get started.
Reconditioning Services
WID_Master16_SolidEndMilling_SectionIntro_N022_N023_Metric_REBRAND.indd 2 11/13/15 2:27 PM
LViWID M 16 S lidE dMilli S i I N022 N023 M i REBRANDN b 1320151 36PM
Huntley, IL
Kingwinford, UK
Istanbul, Turkey
Shlomi, Israel
Tianjin, China
Shanghai, China
Busan, Korea
Bangalore, India
Zory, Poland
Gurgaon, India
Pune, India
Koenigsee, Germany
Barcelona, Spain Milan,
Italy
Indaiatuba,
Brazil
Whitehouse, OH
Asheboro, NC
Global Reconditioning Network
To locate a Reconditioning Center near you, visit widia.com/services.
WID_Master16_SolidEndMilling_SectionIntro_N022_N023_Metric_REBRAND.indd 3 11/13/15 2:27 PM
LViWID M 16 S lidE dMilli Hi hP f O000 O001 M i REBRANDO b 20 20153 36PMLViWID M 16 S lidE dMilli Hi hP f O000 O001 M i REBRANDO b 20 20153 36PM
WID_Master16_SolidEndMilling_HighPerformance_O000_O001_Metric_REBRAND.indd 2 10/30/15 2:18 PM
LViWID M 16 S lidE dMilli Hi hP f O000 O001 M i REBRANDO b 2020153 36PM
widia.com O1
LViWID M 16 S lidE dMilli Hi hP f O000 O001 M i REBRANDO b 2020153 36PM
VariMill ................................................................................................................................................................ O2–O48
Roughing ...........................................................................................................................................................O50–081
Finishing ......................................................................................................................................................... O82–O113
Micro Solid Carbide End Mills .................................................................................................................... O114–O123
Aluminium .................................................................................................................................................... O124–O149
Hard Materials ............................................................................................................................................. O150–O205
Trochoidal Milling ........................................................................................................................................ O206–O212
Solid End Milling • High-Performance Solid Carbide End Mills
WID_Master16_SolidEndMilling_HighPerformance_O000_O001_Metric_REBRAND.indd 3 10/30/15 2:18 PM
O2
LViWID M 16 S lidE dMilli Hi hP f O002 O003 M i REBRANDO b 29 20153 30PM
widia.com
Centre cutting for
plunging and ramping.
38° helix for roughing and
fi nishing operations.
TiAlN and AlTiN coatings for highest
cutting parameters and tool life.
Unequal fl ute spacing
reduces vibrations.
Innovative core design.
VariMill I offers plunging, slotting, and profi ling at the highest possible feed rates for a
wide range of materials. They are designed to provide maximum Metal Removal Rates
(MRR) and to achieve superior surface conditions. A wide range of diameters and corner
confi gurations, such as chamfer, radii, and sharp edges, are available from stock.
• High-performance universal tools for almost all workpiece materials.
• Roughing and fi nishing with one tool.
• Various length-of-cut, long reach and necked versions, ball nose,
corner chamfer, and corner radius available.
VariMill I
High-Performance Solid Carbide End Mills •
VariMill I™
WID_Master16_SolidEndMilling_HighPerformance_O002_O003_Metric_REBRAND.indd 2 10/30/15 2:19 PM
O3
LViWID M 16 S lidE dMilli Hi hP f O002 O003 M i REBRANDO b 2920153 30PM
widia.com
• Increase your output with less tool changes and increased Metal Removal Rates (MRR).
• No specifi c tools for roughing and fi nishing required.
• Less passes due to 1 x D slotting capability (not recommended for 4717 and 4727).
VariMill I™ Series
4777 Series 4778 AlTiN Series
• High metal removal rates
and tool life in:
— Stainless steels, steels,
and alloyed steels.
— High-temperature
alloys and titanium.
• Titanium geometry design.
• Corner radii.
4717 Series 4727 TiAlN Series
• Stainless steel and steel
geometry design.
• 3,5 x D length-of-cut.
• Less passes necessary
for long wall machining.
• Stainless steel and steel
geometry design.
• 5–6 x D length-of-cut.
• Less passes necessary
for long wall machining.
47N7 TiAlN Series 47N7 AlTiN Series
• Stainless steel and steel
geometry design.
• Radii corner and neck
design for cutting depths
requiring additional passes.
• Titanium and stainless steel
geometry design.
• Radii corner and neck
design for cutting depths
requiring additional passes.
47N6 Series 47N0 Series
• Stainless steel and steel
geometry design.
• Bene t from long reach
and neck design for
deep cavities.
• Stainless steel and steel
geometry design.
• Centre cutting ball nose.
WID_Master16_SolidEndMilling_HighPerformance_O002_O003_Metric_REBRAND.indd 3 10/30/15 2:19 PM
O4
LViWID M 16 S lidE dMilli Hi hP f O004 O005 M i REBRANDO b 20 20153 33PM
widia.com
WP15PE WP15PE
High-Performance Solid Carbide End Mills • VariMill™
• Unequal ute spacing.
• Centre cutting.
• Single tool for both roughing and
nishing operations requiring
fewer setups.
• Standard items listed. Additional
styles and coatings made-to-order.
Series 4777 • VariMill I™ • Victory™ Grades
Series 4777 • VariMill • Victory Grades
grade WP15PE
AlTiN
order # catalogue #
grade WP15PE
AlTiN
order # catalogue # D1 D
length of cut
Ap1 max
length
LR¡BCH
5576753 477704001T – 4,0 6 12,00 55 0,20 —
5576751 477704002T 5576752 477704002W 4,0 6 12,00 55 — 0,40
5576754 4777040Z2T – 4,0 6 12,00 55 — —
5576755 477705002T 5576756 477705002W 5,0 6 13,00 57 — 0,40
5576757 477705012T – 5,0 6 13,00 57 0,20 —
5576758 4777050Z2T – 5,0 6 13,00 57 — —
5576759 477706002T 5576760 477706002W 6,0 6 13,00 57 — 0,40
5576761 477706012T – 6,0 6 13,00 57 0,20 —
5576762 4777060Z2T – 6,0 6 13,00 57 — —
5576763 477707003T 5576764 477707003W 7,0 8 16,00 63 — 0,40
5576765 477707013T – 7,0 8 16,00 63 0,20 —
5576766 4777070Z3T – 7,0 8 16,00 63 — —
5576767 477708003T 5576768 477708003W 8,0 8 16,00 63 — 0,40
5576769 477708013T – 8,0 8 16,00 63 0,20 —
5576770 4777080Z3T – 8,0 8 16,00 63 — —
5576771 477709004T 5576772 477709004W 9,0 10 19,00 72 — 0,50
5576773 477709014T – 9,0 10 19,00 72 0,20 —
5576774 4777090Z4T – 9,0 10 19,00 72 — —
5576775 477710004T 5576776 477710004W 10,0 10 22,00 72 — 0,50
5576777 477710024T – 10,0 10 22,00 72 0,30 —
End Mill Tolerances
D1 tolerance e8 D
tolerance h6
+ / -
) 3 -0,014/-0,028 ) 3 0/-0,006
> 3-6 -0,020/-0,038 > 3–6 0/-0,008
> 6–10 -0,025/-0,047 > 6–10 0/-0,009
> 10–18 -0,032/-0,059 > 10–18 0/-0,011
> 18–30 -0,040/-0,073 > 18–30 0/-0,013
(continued)
High-Performance Solid Carbide End Mills
rst choice
alternate choice
WID_Master16_SolidEndMilling_HighPerformance_O004_O005_Metric_REBRAND.indd 4 10/30/15 2:19 PM
O5
LViWID M 16 S lidE dMilli Hi hP f O004 O005 M i REBRANDO b 2020153 33PM
widia.com
WP15PE WP15PE
High-Performance Solid Carbide End Mills • VariMill™
Series 4777 • VariMill I™ • Victory™ Grades
grade WP15PE
AlTiN
order # catalogue #
grade WP15PE
AlTiN
order # catalogue # D1 D
length of cut
Ap1 max
length
LR¡BCH
5576778 4777100Z4T – 10,0 10 22,00 72 — —
5576779 4777110Z5T – 11,0 12 26,00 83 — —
5576790 477712005T 5576791 477712005W 12,0 12 26,00 83 — 0,50
5576792 477712025T – 12,0 12 26,00 83 0,30 —
5576793 4777120Z5T – 12,0 12 26,00 83 — —
5576794 477714015T 5576795 477714014W 14,0 14 26,00 83 — 0,50
5576796 477716006T 5576797 477716006W 16,0 16 32,00 92 — 0,50
5576798 477716026T – 16,0 16 32,00 92 0,30 —
5576799 4777160Z6T – 16,0 16 32,00 92 — —
5576810 477718018T 5576811 477718018W 18,0 18 32,00 92 — 0,50
5576812 477720007T 5576813 477720007W 20,0 20 38,00 104 — 0,50
5576814 47772002T – 20,0 20 38,00 104 0,30 —
5576816 477725008T 5576817 477725008W 25,0 25 45,00 121 — 0,50
(Series 4777 • VariMill • Victory Grades — continued)
High-Performance Solid Carbide End Mills
rst choice
alternate choice
WID_Master16_SolidEndMilling_HighPerformance_O004_O005_Metric_REBRAND.indd 5 10/30/15 2:19 PM
O6
LViWID M 16 S lidE dMilli Hi hP f O006 O007 M i REBRANDO b 20 20153 33PM
widia.com
High-Performance Solid Carbide End Mills • VariMill™
Series 4778 • VariMill I™
End Mill Tolerances
D1 tolerance e8 D
tolerance h6
+ / -
) 3 -0,014/-0,028 ) 3 0/-0,006
> 3–6 -0,020/-0,038 > 3–6 0/-0,008
> 6–10 -0,025/-0,047 > 6–10 0/-0,009
> 10–18 -0,032/-0,059 > 10–18 0/-0,011
> 18–30 -0,040/-0,073 > 18–30 0/-0,013
Series 4778 • VariMill
AlTiN-MT AlTiN-MW
High-Performance Solid Carbide End Mills
• Unequal ute spacing.
• Centre cutting.
• Optimised geometry for titanium
machining.
• Single tool for both roughing and nishing
operations requiring fewer setups.
• Standard items listed. Additional styles
and coatings made-to-order.
rst choice
alternate choice
grade AlTiN-MT
AlTiN
order # catalogue #
grade AlTiN-MW
AlTiN
order # catalogue # D1 D
length of cut
Ap1 max
length
LR¡
2545563 477804002MT 3592826 477804002MW 4,0 6 12,00 55 0,20
2545564 477805002MT 3592827 477805002MW 5,0 6 13,00 57 0,20
2545565 477806002MT 3592828 477806002MW 6,0 6 13,00 57 0,20
2545570 477807003MT 3592829 477807003MW 7,0 8 16,00 63 0,20
2545603 477808003MT 3592830 477808003MW 8,0 8 16,00 63 0,20
2545605 477809004MT 3592831 477809004MW 9,0 10 19,00 72 0,20
2601245 477810004MT 3592832 477810004MW 10,0 10 22,00 72 0,30
2601246 477812005MT 3592833 477812005MW 12,0 12 26,00 83 0,30
2601248 477814014MT 3592834 477814014MW 14,0 14 26,00 83 0,30
2601249 477816006MT 3592835 477816006MW 16,0 16 32,00 92 0,30
2601250 477818018MT 3592836 477818018MW 18,0 18 32,00 92 0,30
2601251 477820007MT 3592837 477820007MW 20,0 20 38,00 104 0,30
2601252 477825008MT 3592838 477825008MW 25,0 25 45,00 121 0,30
WID_Master16_SolidEndMilling_HighPerformance_O006_O007_Metric_REBRAND.indd 6 10/30/15 2:19 PM
O7
LViWID M 16 S lidE dMilli Hi hP f O006 O007 M i REBRANDO b 2020153 33PM
widia.com
TiAlN-LW
High-Performance Solid Carbide End Mills • VariMill™
Series 4717 • VariMill I™ • Extended Length of Cut
Series 4717 • VariMill • Extended Length of Cut
grade TiAlN-LW
TiAlN
order # catalogue # D1 D
length of cut
Ap1 max
length
L BCH
3641112 471706002LW 6,0 6 32,00 76 0,40
3641113 471708003LW 8,0 8 32,00 87 0,40
3641114 471710004LW 10,0 10 38,00 89 0,50
3641115 471712005LW 12,0 12 51,00 100 0,50
3641116 471716006LW 16,0 16 57,00 125 0,50
3641117 471720007LW 20,0 20 57,00 125 0,50
• Unequal ute spacing.
• Centre cutting.
• Standard items listed. Additional
styles and coatings made-to-order.
rst choice
alternate choice
End Mill Tolerances
D1 tolerance e8 D
tolerance h6
+ / -
) 3 -0,014/-0,028 ) 3 0/-0,006
> 3-6 -0,020/-0,038 > 3–6 0/-0,008
> 6–10 -0,025/-0,047 > 6–10 0/-0,009
> 10–18 -0,032/-0,059 > 10–18 0/-0,011
> 18–30 -0,040/-0,073 > 18–30 0/-0,013
High-Performance Solid Carbide End Mills
WID_Master16_SolidEndMilling_HighPerformance_O006_O007_Metric_REBRAND.indd 7 10/30/15 2:19 PM
O8
LViWID M 16 S lidE dMilli Hi hP f O008 O009 M i REBRANDO b 20 20153 33PM
widia.com
TiAlN-LW
High-Performance Solid Carbide End Mills • VariMill™
Series 4727 • VariMill I™ • Extended Length of Cut
End Mill Tolerances
D1 tolerance e8 D
tolerance h6
+ / -
) 3 -0,014/-0,028 ) 3 0/-0,006
> 3-6 -0,020/-0,038 > 3–6 0/-0,008
> 6–10 -0,025/-0,047 > 6–10 0/-0,009
> 10–18 -0,032/-0,059 > 10–18 0/-0,011
> 18–30 -0,040/-0,073 > 18–30 0/-0,013
Series 4727 • VariMill • Extended Length of Cut
grade TiAlN-LW
TiAlN
order # catalogue # D1 D
length of cut
Ap1 max
length
L BCH
3641118 472712005LW 12,0 12 76,00 125 0,50
3641119 472716006LW 16,0 16 76,00 150 0,50
3641120 472720007LW 20,0 20 102,00 175 0,50
High-Performance Solid Carbide End Mills
• Unequal ute spacing.
• Centre cutting.
• Standard items listed. Additional
styles and coatings made-to-order.
rst choice
alternate choice
WID_Master16_SolidEndMilling_HighPerformance_O008_O009_Metric_REBRAND.indd 8 10/30/15 2:19 PM
O9
LViWID M 16 S lidE dMilli Hi hP f O008 O009 M i REBRANDO b 2020153 33PM
widia.com
AlTiN-MT TiAlN-LT
High-Performance Solid Carbide End Mills • VariMill™
Series 47N7 • VariMill I™ • With Neck
Series 47N7 • VariMill • With Neck
grade AlTiN-MT
AlTiN
order # catalogue #
grade TiAlN-LT
TiAlN
order # catalogue # D1 D D3
length of cut
Ap1 max L3
length
LR¡
— 3462450 47N704002LT 4,0 6 3,60 12,00 16,00 55 0,40
3462452 47N704012MT 3462451 47N704012LT 4,0 6 3,60 12,00 16,00 55 0,50
— 3462453 47N704022LT 4,0 6 3,60 12,00 16,00 55 1,00
— 3462454 47N705002LT 5,0 6 4,60 13,00 18,00 57 0,50
3462456 47N705012MT 3462455 47N705012LT 5,0 6 4,60 13,00 18,00 57 1,00
3462458 47N706002MT 3462457 47N706002LT 6,0 6 5,50 13,00 21,00 57 0,50
3462460 47N706012MT 3462459 47N706012LT 6,0 6 5,50 13,00 21,00 57 1,00
— 3462461 47N706022LT 6,0 6 5,50 13,00 21,00 57 1,50
3462463 47N708003MT 3462462 47N708003LT 8,0 8 7,50 16,00 27,00 63 0,50
3462465 47N708013MT 3462464 47N708013LT 8,0 8 7,50 16,00 27,00 63 1,00
— 3462466 47N708023LT 8,0 8 7,50 16,00 27,00 63 1,50
— 3462467 47N708033LT 8,0 8 7,50 16,00 27,00 63 2,00
3462469 47N710004MT 3462468 47N710004LT 10,0 10 9,50 22,00 32,00 72 0,50
3462471 47N710014MT 3462470 47N710014LT 10,0 10 9,50 22,00 32,00 72 1,00
— 3462472 47N710024LT 10,0 10 9,50 22,00 32,00 72 1,50
3462474 47N710034MT 3462473 47N710034LT 10,0 10 9,50 22,00 32,00 72 2,00
3462476 47N712005MT 3462475 47N712005LT 12,0 12 11,50 26,00 38,00 83 0,50
3462478 47N712015MT 3462477 47N712015LT 12,0 12 11,50 26,00 38,00 83 1,00
— 3462479 47N712025LT 12,0 12 11,50 26,00 38,00 83 1,50
3462481 47N712035MT 3462480 47N712035LT 12,0 12 11,50 26,00 38,00 83 2,00
• Unequal ute spacing.
• Centre cutting.
• Single tool for both roughing and nishing
operations requiring fewer setups.
• Standard items listed. Additional styles
and coatings made-to-order.
rst choice
alternate choice
End Mill Tolerances
D1 tolerance e8 D
tolerance h6
+ / -
) 3 -0,014/-0,028 ) 3 0/-0,006
> 3-6 -0,020/-0,038 > 3–6 0/-0,008
> 6–10 -0,025/-0,047 > 6–10 0/-0,009
> 10–18 -0,032/-0,059 > 10–18 0/-0,011
> 18–30 -0,040/-0,073 > 18–30 0/-0,013
High-Performance Solid Carbide End Mills
(continued)
WID_Master16_SolidEndMilling_HighPerformance_O008_O009_Metric_REBRAND.indd 9 10/30/15 2:19 PM
O10
LViWID M 16 S lidE dMilli Hi hP f O010 O011 M i REBRANDO b 20 20153 45PM
widia.com
AlTiN-MT TiAlN-LT
(Series 47N7 • VariMill • With Neck — continued)
grade AlTiN-MT
AlTiN
order # catalogue #
grade TiAlN-LT
TiAlN
order # catalogue # D1 D D3
length of cut
Ap1 max L3
length
LR¡
3462483 47N712045MT 3462482 47N712045LT 12,0 12 11,50 26,00 38,00 83 4,00
3462485 47N716006MT 3462484 47N716006LT 16,0 16 15,00 32,00 44,00 92 1,00
3462487 47N716016MT 3462486 47N716016LT 16,0 16 15,00 32,00 44,00 92 2,00
3462489 47N716026MT 3462488 47N716026LT 16,0 16 15,00 32,00 44,00 92 4,00
3462491 47N720007MT 3462490 47N720007LT 20,0 20 19,00 38,00 55,00 104 1,00
3462493 47N720017MT 3462492 47N720017LT 20,0 20 19,00 38,00 55,00 104 2,00
3462495 47N720027MT 3462494 47N720027LT 20,0 20 19,00 38,00 55,00 104 4,00
High-Performance Solid Carbide End Mills • VariMill™
Series 47N7 • VariMill I™ • With Neck
High-Performance Solid Carbide End Mills
rst choice
alternate choice
WID_Master16_SolidEndMilling_HighPerformance_O010_O011_Metric_REBRAND.indd 10 10/30/15 2:19 PM
O11
LViWID M 16 S lidE dMilli Hi hP f O010 O011 M i REBRANDO b 2020153 45PM
widia.com
High-Performance Solid Carbide End Mills • VariMill™
Series 47N6 • VariMill I™ • Extended Reach with Neck
Series 47N6 • VariMill • Extended Reach with Neck
TiAlN-LW
• Unequal ute spacing.
• Centre cutting.
• Single tool for both roughing and nishing
operations requiring fewer setups.
• Standard items listed. Additional styles
and coatings made-to-order.
rst choice
alternate choice
End Mill Tolerances
D1 tolerance e8 D
tolerance h6
+ / -
) 3 -0,014/-0,028 ) 3 0/-0,006
> 3-6 -0,020/-0,038 > 3–6 0/-0,008
> 6–10 -0,025/-0,047 > 6–10 0/-0,009
> 10–18 -0,032/-0,059 > 10–18 0/-0,011
> 18–30 -0,040/-0,073 > 18–30 0/-0,013
High-Performance Solid Carbide End Mills
grade TiAlN-LW
TiAlN
order # catalogue # D1 D D3
length of cut
Ap1 max L3
length
L BCH
4067705 47N606002LW 6,0 6 5,50 12,00 42,00 100 0,40
4067706 47N608003LW 8,0 8 7,30 16,00 62,00 100 0,40
4067707 47N610004LW 10,0 10 9,10 20,00 60,00 100 0,50
4067708 47N612005LW 12,0 12 11,00 24,00 73,00 125 0,50
4067709 47N616006LW 16,0 16 14,56 32,00 100,00 150 0,50
4067710 47N620007LW 20,0 20 18,20 40,00 98,00 175 0,50
Detail X
WID_Master16_SolidEndMilling_HighPerformance_O010_O011_Metric_REBRAND.indd 11 10/30/15 2:19 PM
O12
LViWID M 16 S lidE dMilli Hi hP f O012 O013 M i REBRANDO b 20 20153 45PM
widia.com
WP15PE
High-Performance Solid Carbide End Mills • VariMill™
Series 47N0 • VariMill I™ • Ball Nose • Victory™ Grades
End Mill Tolerances
D1 tolerance e8 D
tolerance h6
+ / -
) 3 -0,014/-0,028 ) 3 0/-0,006
> 3–6 -0,020/-0,038 > 3–6 0/-0,008
> 6–10 -0,025/-0,047 > 6–10 0/-0,009
> 10–18 -0,032/-0,059 > 10–18 0/-0,011
> 18–30 -0,040/-0,073 > 18–30 0/-0,013
Series 47N0 • VariMill • Ball Nose • Victory Grades
grade WP15PE
AlTiN
order # catalogue # D1 D D3
length of cut
Ap1 max L3
length
L
5576818 47N005002T 5,0 6 4,70 9,00 15,00 57
5576819 47N006002T 6,0 6 5,64 10,00 15,00 57
5576820 47N008003T 8,0 8 7,52 12,00 20,00 63
5576821 47N010004T 10,0 10 9,40 14,00 25,00 72
5576822 47N012005T 12,0 12 11,28 16,00 30,00 83
5576823 47N016006T 16,0 16 15,04 22,00 38,00 92
5576824 47N020007T 20,0 20 18,80 26,00 50,00 104
High-Performance Solid Carbide End Mills
• Unequal ute spacing.
• Centre cutting.
• Single tool for both roughing and nishing
operations requiring fewer setups.
• Standard items listed. Additional styles
and coatings made-to-order.
rst choice
alternate choice
WID_Master16_SolidEndMilling_HighPerformance_O012_O013_Metric_REBRAND.indd 12 10/30/15 2:19 PM
O13
LViWID M 16 S lidE dMilli Hi hP f O012 O013 M i REBRANDO b 2020153 45PM
widia.com
Series 4777 • VariMill • Victory Grades
Material
Group
Side Milling (A)
and Slotting (B) WP15PE Recommended feed per tooth (fz = mm/th) for side milling (A).
For slotting (B), reduce fz by 20%.
AB
Cutting Speed — vc
m/min D1 — Diameter
ap ae ap min max mm 4,0 5,0 6,0 8,0 10,0 12,0 14,0 16,0 18,0 20,0 25,0
P
01,5 x D 0,5 x D 1 x D 150 – 200 fz 0,028 0,036 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114 0,124
11,5 x D 0,5 x D 1 x D 150 – 200 fz 0,028 0,036 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114 0,124
21,5 x D 0,5 x D 1 x D 140 – 190 fz 0,028 0,036 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114 0,124
31,5 x D 0,5 x D 1 x D 120 – 160 fz 0,023 0,030 0,036 0,050 0,061 0,070 0,079 0,087 0,095 0,101 0,114
41,5 x D 0,5 x D 0,75 x D 90 – 150 fz 0,021 0,027 0,033 0,045 0,054 0,062 0,070 0,077 0,083 0,088 0,098
51,5 x D 0,5 x D 1 x D 60 – 100 fz 0,019 0,024 0,029 0,040 0,048 0,056 0,063 0,070 0,076 0,081 0,091
61,5 x D 0,5 x D 0,75 x D 50 – 75 fz 0,016 0,020 0,025 0,034 0,040 0,047 0,052 0,057 0,061 0,065 0,071
M
11,5 x D 0,5 x D 1 x D 90 – 115 fz 0,023 0,030 0,036 0,050 0,061 0,070 0,079 0,087 0,095 0,101 0,114
21,5 x D 0,5 x D 1 x D 60 – 80 fz 0,019 0,024 0,029 0,040 0,048 0,056 0,063 0,070 0,076 0,081 0,091
31,5 x D 0,5 x D 1 x D 60 – 70 fz 0,016 0,020 0,025 0,034 0,040 0,047 0,052 0,057 0,061 0,065 0,071
K
11,5 x D 0,5 x D 1 x D 120 – 150 fz 0,028 0,036 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114 0,124
21,5 x D 0,5 x D 1 x D 110 – 140 fz 0,023 0,030 0,036 0,050 0,061 0,070 0,079 0,087 0,095 0,101 0,114
31,5 x D 0,5 x D 1 x D 110 – 130 fz 0,019 0,024 0,029 0,040 0,048 0,056 0,063 0,070 0,076 0,081 0,091
S
11,5 x D 0,3 x D 0,3 x D 50 – 90 fz 0,023 0,030 0,036 0,050 0,061 0,070 0,079 0,087 0,095 0,101 0,114
21,5 x D 0,3 x D 0,3 x D 25 – 40 fz 0,013 0,016 0,019 0,026 0,032 0,037 0,042 0,046 0,050 0,054 0,061
31,5 x D 0,5 x D 1 x D 60 – 80 fz 0,019 0,024 0,029 0,040 0,048 0,056 0,063 0,070 0,076 0,081 0,091
41,5 x D 0,5 x D 1 x D 50 – 60 fz 0,016 0,021 0,026 0,037 0,045 0,052 0,058 0,064 0,069 0,074 0,084
H11,5 x D 0,5 x D 0,75 x D 80 – 140 fz 0,021 0,027 0,033 0,045 0,054 0,062 0,070 0,077 0,083 0,088 0,098
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group.
Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on >12mm diameters.
High-Performance Solid Carbide End Mills • VariMill™
Application Data • Series 4777 • VariMill I™ • Victory™ Grades
High-Performance Solid Carbide End Mills
WID_Master16_SolidEndMilling_HighPerformance_O012_O013_Metric_REBRAND.indd 13 10/30/15 2:19 PM
O14
LViWID M 16 S lidE dMilli Hi hP f O014 O015 M i REBRANDO b 20 20153 44PM
widia.com
High-Performance Solid Carbide End Mills • VariMill™
Application Data • Series 4778 • VariMill I™
High-Performance Solid Carbide End Mills
Series 4778 • VariMill
Material
Group
Side Milling (A)
and Slotting (B) AlTiN Recommended feed per tooth (fz = mm/th) for side milling (A).
For slotting (B), reduce fz by 20%.
AB
Cutting Speed — vc
m/min D1 — Diameter
ap ae ap min max mm 4,0 6,0 8,0 10,0 12,0 16,0 20,0 25,0
P
1
1,5 x D 0,5 x D 1 x D 150 – 200 fz 0,028 0,044 0,060 0,072 0,083 0,101 0,114 0,124
2
1,5 x D 0,5 x D 1 x D 140 – 190 fz 0,028 0,044 0,060 0,072 0,083 0,101 0,114 0,124
3
1,5 x D 0,5 x D 1 x D 120 – 160 fz 0,023 0,036 0,050 0,061 0,070 0,087 0,101 0,114
4
1,5 x D 0,5 x D 0,75 x D 90 – 150 fz 0,021 0,033 0,045 0,054 0,062 0,077 0,088 0,098
5
1,5 x D 0,5 x D 1 x D 60 – 100 fz 0,019 0,029 0,040 0,048 0,056 0,070 0,081 0,091
6
1,5 x D 0,5 x D 0,75 x D 50 – 75 fz 0,016 0,025 0,034 0,040 0,047 0,057 0,065 0,071
M
1
1,5 x D 0,5 x D 1 x D 90 – 115 fz 0,023 0,036 0,050 0,061 0,070 0,087 0,101 0,114
2
1,5 x D 0,5 x D 1 x D 60 – 80 fz 0,019 0,029 0,040 0,048 0,056 0,070 0,081 0,091
3
1,5 x D 0,5 x D 1 x D 60 – 70 fz 0,016 0,025 0,034 0,040 0,047 0,057 0,065 0,071
K
1
1,5 x D 0,5 x D 1 x D 120 – 150 fz 0,028 0,044 0,060 0,072 0,083 0,101 0,114 0,124
2
1,5 x D 0,5 x D 1 x D 110 – 130 fz 0,023 0,036 0,050 0,061 0,070 0,087 0,101 0,114
3
1,5 x D 0,5 x D 1 x D 100 – 130 fz 0,019 0,029 0,040 0,048 0,056 0,070 0,081 0,091
S
1
1,5 x D 0,3 x D 0,3 x D 50 – 90 fz 0,023 0,036 0,050 0,061 0,070 0,087 0,101 0,114
2
1,5 x D 0,3 x D 0,3 x D 25 – 40 fz 0,013 0,019 0,026 0,032 0,037 0,046 0,054 0,061
3
1,5 x D 0,5 x D 1 x D 60 – 80 fz 0,019 0,029 0,040 0,048 0,056 0,070 0,081 0,091
4
1,5 x D 0,5 x D 1 x D 50 – 60 fz 0,016 0,026 0,037 0,045 0,052 0,064 0,074 0,084
H1
1,5 x D 0,5 x D 0,75 x D 80 – 140 fz 0,021 0,033 0,045 0,054 0,062 0,077 0,088 0,098
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group.
Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on >12mm diameters.
WID_Master16_SolidEndMilling_HighPerformance_O014_O015_Metric_REBRAND.indd 14 10/30/15 2:19 PM
O15
LViWID M 16 S lidE dMilli Hi hP f O014 O015 M i REBRANDO b 2020153 44PM
widia.com
High-Performance Solid Carbide End Mills • VariMill™
Application Data • Series 4717 • VariMill I™
High-Performance Solid Carbide End Mills
Series 4717 • VariMill
Material
Group
Side Milling (A)
Finishing Roughing Recommended feed per tooth (fz = mm/th)
for side milling (A).
A
TiAlN
A
TiAlN
Cutting Speed
— vc
m/min
Cutting Speed
— vc
m/min
D1 — Diameter
ap ae min max ap ae min max mm 6,0 8,0 10,0 12,0 16,0 20,0
P
1
Ap1 max 0,05 x D* 300 – 400 Ap1 max 0,2 x D 150 – 200 fz 0,044 0,060 0,072 0,083 0,092 0,114
2
Ap1 max 0,05 x D* 280 – 380 Ap1 max 0,2 x D 140 – 190 fz 0,044 0,060 0,072 0,083 0,092 0,114
3
Ap1 max 0,05 x D* 240 – 320 Ap1 max 0,2 x D 120 – 160 fz 0,036 0,050 0,061 0,070 0,079 0,101
4
Ap1 max 0,05 x D* 180 – 300 Ap1 max 0,2 x D 90 – 150 fz 0,033 0,045 0,054 0,062 0,070 0,088
5
Ap1 max 0,05 x D* 120 – 200 Ap1 max 0,2 x D 60 – 100 fz 0,029 0,040 0,048 0,056 0,063 0,081
6
Ap1 max 0,05 x D* 100 – 150 Ap1 max 0,2 x D 50 – 75 fz 0,025 0,034 0,040 0,047 0,052 0,065
M
1
Ap1 max 0,05 x D* 180 – 230 Ap1 max 0,2 x D 90 – 115 fz 0,036 0,050 0,061 0,070 0,079 0,101
2
Ap1 max 0,05 x D* 120 – 160 Ap1 max 0,2 x D 60 – 80 fz 0,029 0,040 0,048 0,056 0,063 0,081
3
Ap1 max 0,05 x D* 120 – 140 Ap1 max 0,2 x D 60 – 70 fz 0,025 0,034 0,040 0,047 0,052 0,065
K
1
Ap1 max 0,05 x D* 240 – 300 Ap1 max 0,2 x D 120 – 150 fz 0,044 0,060 0,072 0,083 0,092 0,114
2
Ap1 max 0,05 x D* 220 – 260 Ap1 max 0,2 x D 110 – 130 fz 0,036 0,050 0,061 0,070 0,079 0,101
3
Ap1 max 0,05 x D* 200 – 260 Ap1 max 0,2 x D 100 – 130 fz 0,029 0,040 0,048 0,056 0,063 0,081
S
1
Ap1 max 0,05 x D* 100 – 180 Ap1 max 0,2 x D 50 – 90 fz 0,036 0,050 0,061 0,070 0,079 0,101
2
Ap1 max 0,05 x D* 50 – 80 Ap1 max 0,2 x D 25 – 40 fz 0,036 0,050 0,061 0,070 0,079 0,101
3
Ap1 max 0,05 x D* 120 – 160 Ap1 max 0,2 x D 60 – 80 fz 0,019 0,026 0,032 0,037 0,042 0,054
4
Ap1 max 0,05 x D* 100 – 120 Ap1 max 0,2 x D 50 – 60 fz 0,026 0,037 0,045 0,052 0,058 0,074
H1
Ap1 max 0,05 x D* 160 – 280 Ap1 max 0,2 x D 80 – 140 fz 0,033 0,045 0,054 0,062 0,070 0,088
*For cutting data above, use ae ) 0,8mm.
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group.
Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on >12mm diameters.
For finishing, increase feed per tooth by 20%.
WID_Master16_SolidEndMilling_HighPerformance_O014_O015_Metric_REBRAND.indd 15 10/30/15 2:19 PM
O16
LViWID M 16 S lidE dMilli Hi hP f O016 O017 M i REBRANDO b 20 20153 44PM
widia.com
High-Performance Solid Carbide End Mills • VariMill™
Application Data • Series 4727 • VariMill I™
High-Performance Solid Carbide End Mills
Series 4727 • VariMill
Material
Group
Side Milling (A)
Finishing Roughing Recommended feed per tooth (fz = mm/th)
for side milling (A).
A
TiAlN
A
TiAlN
Cutting Speed — vc
m/min
Cutting Speed — vc
m/min D1 — Diameter
ap ae min max ap ae min max mm 12,0 16,0 20,0
P
1
Ap1 max 0,05 x D* 300 – 400 Ap1 max 0,2 x D 150 – 200 fz 0,083 0,101 0,114
2
Ap1 max 0,05 x D* 280 – 380 Ap1 max 0,2 x D 140 – 190 fz 0,083 0,101 0,114
3
Ap1 max 0,05 x D* 240 – 320 Ap1 max 0,2 x D 120 – 160 fz 0,070 0,087 0,101
4
Ap1 max 0,05 x D* 180 – 300 Ap1 max 0,2 x D 90 – 150 fz 0,062 0,077 0,088
5
Ap1 max 0,05 x D* 120 – 200 Ap1 max 0,2 x D 60 – 100 fz 0,056 0,070 0,081
6
Ap1 max 0,05 x D* 100 – 150 Ap1 max 0,2 x D 50 – 75 fz 0,047 0,057 0,065
M
1
Ap1 max 0,05 x D* 180 – 230 Ap1 max 0,2 x D 90 – 115 fz 0,070 0,087 0,101
2
Ap1 max 0,05 x D* 120 – 160 Ap1 max 0,2 x D 60 – 80 fz 0,056 0,070 0,081
3
Ap1 max 0,05 x D* 120 – 140 Ap1 max 0,2 x D 60 – 70 fz 0,047 0,057 0,065
K
1
Ap1 max 0,05 x D* 240 – 300 Ap1 max 0,2 x D 120 – 150 fz 0,083 0,101 0,114
2
Ap1 max 0,05 x D* 220 – 260 Ap1 max 0,2 x D 110 – 130 fz 0,070 0,087 0,101
3
Ap1 max 0,05 x D* 200 – 260 Ap1 max 0,2 x D 100 – 130 fz 0,056 0,070 0,081
S
1
Ap1 max 0,05 x D* 100 – 180 Ap1 max 0,2 x D 50 – 90 fz 0,070 0,087 0,101
2
Ap1 max 0,05 x D* 50 – 80 Ap1 max 0,2 x D 25 – 40 fz 0,070 0,087 0,101
3
Ap1 max 0,05 x D* 120 – 160 Ap1 max 0,2 x D 60 – 80 fz 0,037 0,046 0,054
4
Ap1 max 0,05 x D* 100 – 120 Ap1 max 0,2 x D 50 – 60 fz 0,052 0,064 0,074
H1
Ap1 max 0,05 x D* 160 – 280 Ap1 max 0,2 x D 80 – 140 fz 0,062 0,077 0,088
*For cutting data above, use ae ) 0,8mm.
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group.
Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on >12mm diameters.
For finishing, increase feed per tooth by 20%.
WID_Master16_SolidEndMilling_HighPerformance_O016_O017_Metric_REBRAND.indd 16 10/30/15 2:19 PM
O17
LViWID M 16 S lidE dMilli Hi hP f O016 O017 M i REBRANDO b 2020153 44PM
widia.com
High-Performance Solid Carbide End Mills • VariMill™
Application Data • Series 47N7 • VariMill I™ • With Neck
High-Performance Solid Carbide End Mills
Series 47N7 AlTiN • VariMill • With Neck
Material
Group
Side Milling (A)
and Slotting (B) AlTiN Recommended feed per tooth (fz = mm/th) for side milling (A).
For slotting (B), reduce fz by 20%.
AB
Cutting Speed — vc
m/min D1 — Diameter
ap ae ap min – max mm 4,0 6,0 8,0 10,0 12,0 16,0 20,0
P
1
1,5 x D 0,5 x D 1 x D 150 – 200 fz 0,028 0,044 0,060 0,072 0,083 0,101 0,114
2
1,5 x D 0,5 x D 1 x D 140 – 190 fz 0,028 0,044 0,060 0,072 0,083 0,101 0,114
3
1,5 x D 0,5 x D 1 x D 120 – 160 fz 0,023 0,036 0,050 0,061 0,070 0,087 0,101
4
1,5 x D 0,5 x D 0,75 x D 90 – 150 fz 0,021 0,033 0,045 0,054 0,062 0,077 0,088
5
1,5 x D 0,5 x D 1 x D 60 – 100 fz 0,019 0,029 0,040 0,048 0,056 0,070 0,081
6
1,5 x D 0,5 x D 0,75 x D 50 – 75 fz 0,016 0,025 0,034 0,040 0,047 0,057 0,065
M
1
1,5 x D 0,5 x D 1 x D 90 – 115 fz 0,023 0,036 0,050 0,061 0,070 0,087 0,101
2
1,5 x D 0,5 x D 1 x D 60 – 80 fz 0,019 0,029 0,040 0,048 0,056 0,070 0,081
3
1,5 x D 0,5 x D 1 x D 60 – 70 fz 0,016 0,025 0,034 0,040 0,047 0,057 0,065
K
1
1,5 x D 0,5 x D 1 x D 120 – 150 fz 0,028 0,044 0,060 0,072 0,083 0,101 0,114
2
1,5 x D 0,5 x D 1 x D 110 – 130 fz 0,023 0,036 0,050 0,061 0,070 0,087 0,101
3
1,5 x D 0,5 x D 1 x D 100 – 130 fz 0,019 0,029 0,040 0,048 0,056 0,070 0,081
S
1
1,5 x D 0,3 x D 0,3 x D 50 – 90 fz 0,023 0,036 0,050 0,061 0,070 0,087 0,101
2
1,5 x D 0,3 x D 0,3 x D 25 – 40 fz 0,013 0,019 0,026 0,032 0,037 0,046 0,054
3
1,5 x D 0,5 x D 1 x D 60 – 80 fz 0,019 0,029 0,040 0,048 0,056 0,070 0,081
4
1,5 x D 0,5 x D 1 x D 50 – 60 fz 0,016 0,026 0,037 0,045 0,052 0,064 0,074
H1
1,5 x D 0,5 x D 0,75 x D 80 – 140 fz 0,021 0,033 0,045 0,054 0,062 0,077 0,088
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group.
Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on >12mm diameters.
WID_Master16_SolidEndMilling_HighPerformance_O016_O017_Metric_REBRAND.indd 17 10/30/15 2:19 PM
O18
LViWID M 16 S lidE dMilli Hi hP f O018 O019 M i REBRANDO b 20 20153 44PM
widia.com
High-Performance Solid Carbide End Mills • VariMill™
Application Data • Series 47N7 • VariMill I™ • With Neck
High-Performance Solid Carbide End Mills
Series 47N7 TiAlN • VariMill • With Neck
Material
Group
Side Milling (A)
and Slotting (B) TiAlN Recommended feed per tooth (fz = mm/th) for side milling (A).
For slotting (B), reduce fz by 20%.
AB
Cutting Speed — vc
m/min D1 — Diameter
ap ae ap min max mm 4,0 6,0 8,0 10,0 12,0 16,0 20,0
P
1
1,5 x D 0,5 x D 1 x D 150 – 200 fz 0,028 0,044 0,060 0,072 0,083 0,101 0,114
2
1,5 x D 0,5 x D 1 x D 140 – 190 fz 0,028 0,044 0,060 0,072 0,083 0,101 0,114
3
1,5 x D 0,5 x D 1 x D 120 – 160 fz 0,023 0,036 0,050 0,061 0,070 0,087 0,101
4
1,5 x D 0,5 x D 0,75 x D 90 – 150 fz 0,021 0,033 0,045 0,054 0,062 0,077 0,088
5
1,5 x D 0,5 x D 1 x D 60 – 100 fz 0,019 0,029 0,040 0,048 0,056 0,070 0,081
6
1,5 x D 0,5 x D 0,75 x D 50 – 75 fz 0,016 0,025 0,034 0,040 0,047 0,057 0,065
M
1
1,5 x D 0,5 x D 1 x D 90 – 115 fz 0,023 0,036 0,050 0,061 0,070 0,087 0,101
2
1,5 x D 0,5 x D 1 x D 60 – 80 fz 0,019 0,029 0,040 0,048 0,056 0,070 0,081
3
1,5 x D 0,5 x D 1 x D 60 – 70 fz 0,016 0,025 0,034 0,040 0,047 0,057 0,065
K
1
1,5 x D 0,5 x D 1 x D 120 – 150 fz 0,028 0,044 0,060 0,072 0,083 0,101 0,114
2
1,5 x D 0,5 x D 1 x D 110 – 130 fz 0,023 0,036 0,050 0,061 0,070 0,087 0,101
3
1,5 x D 0,5 x D 1 x D 100 – 130 fz 0,019 0,029 0,040 0,048 0,056 0,070 0,081
S
1
1,5 x D 0,3 x D 0,3 x D 50 – 90 fz 0,023 0,036 0,050 0,061 0,070 0,087 0,101
2
1,5 x D 0,3 x D 0,3 x D 25 – 40 fz 0,013 0,019 0,026 0,032 0,037 0,046 0,054
3
1,5 x D 0,5 x D 1 x D 60 – 80 fz 0,019 0,029 0,040 0,048 0,056 0,070 0,081
4
1,5 x D 0,5 x D 1 x D 50 – 60 fz 0,016 0,026 0,037 0,045 0,052 0,064 0,074
H1
1,5 x D 0,5 x D 0,75 x D 80 – 140 fz 0,021 0,033 0,045 0,054 0,062 0,077 0,088
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group.
Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on >12mm diameters.
WID_Master16_SolidEndMilling_HighPerformance_O018_O019_Metric_REBRAND.indd 18 10/30/15 2:19 PM
O19
LViWID M 16 S lidE dMilli Hi hP f O018 O019 M i REBRANDO b 2020153 44PM
widia.com
High-Performance Solid Carbide End Mills • VariMill™
Application Data • Series 47N6 • VariMill I™ • With Neck
High-Performance Solid Carbide End Mills
Series 47N6 • VariMill • With Neck
Material
Group
Side Milling (A)
and Slotting (B) TiAlN Recommended feed per tooth (fz = mm/th) for side milling (A).
For slotting (B), reduce fz by 20%.
AB
Cutting Speed — vc
m/min D1 — Diameter
ap ae ap min max mm 6,0 8,0 10,0 12,0 16,0 20,0
P
0
1,5 x D 0,2 x D 0,5 x D 150 – 200 fz 0,044 0,060 0,072 0,083 0,101 0,114
1
1,5 x D 0,2 x D 0,5 x D 150 – 200 fz 0,044 0,060 0,072 0,083 0,101 0,114
2
1,5 x D 0,2 x D 0,5 x D 140 – 190 fz 0,044 0,060 0,072 0,083 0,101 0,114
3
1,5 x D 0,2 x D 0,5 x D 120 – 160 fz 0,036 0,050 0,061 0,070 0,087 0,101
4
1,5 x D 0,2 x D 0,5 x D 90 – 150 fz 0,033 0,045 0,054 0,062 0,077 0,088
5
1,5 x D 0,2 x D 0,5 x D 60 – 100 fz 0,029 0,040 0,048 0,056 0,070 0,081
6
1,5 x D 0,2 x D 0,5 x D 50 – 75 fz 0,025 0,034 0,040 0,047 0,057 0,065
M
1
1,5 x D 0,2 x D 0,5 x D 90 – 115 fz 0,036 0,050 0,061 0,070 0,087 0,101
2
1,5 x D 0,2 x D 0,5 x D 60 – 80 fz 0,029 0,040 0,048 0,056 0,070 0,081
3
1,5 x D 0,2 x D 0,5 x D 60 – 70 fz 0,025 0,034 0,040 0,047 0,057 0,065
K
1
1,5 x D 0,2 x D 0,5 x D 120 – 150 fz 0,044 0,060 0,072 0,083 0,101 0,114
2
1,5 x D 0,2 x D 0,5 x D 110 – 130 fz 0,036 0,050 0,061 0,070 0,087 0,101
3
1,5 x D 0,2 x D 0,5 x D 110 – 130 fz 0,029 0,040 0,048 0,056 0,070 0,081
S
1
1,5 x D 0,2 x D 0,5 x D 50 – 90 fz 0,036 0,050 0,061 0,070 0,087 0,101
2
1,5 x D 0,1 x D 0,3 x D 25 – 40 fz 0,019 0,026 0,032 0,037 0,046 0,054
3
1,5 x D 0,2 x D 0,5 x D 60 – 80 fz 0,029 0,040 0,048 0,056 0,070 0,081
4
1,5 x D 0,2 x D 0,5 x D 50 – 60 fz 0,026 0,037 0,045 0,052 0,064 0,074
H1
1,5 x D 0,1 x D 0,3 x D 80 – 140 fz 0,033 0,045 0,054 0,062 0,077 0,088
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group.
Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on >12mm diameters.
WID_Master16_SolidEndMilling_HighPerformance_O018_O019_Metric_REBRAND.indd 19 10/30/15 2:19 PM
O20
LViWID M 16 S lidE dMilli Hi hP f O020 O021 M i REBRANDN b 11 20158 47AM
widia.com
High-Performance Solid Carbide End Mills • VariMill™
Application Data • Series 47N0 •With Neck • VariMill I™ • Victory™ Grades
High-Performance Solid Carbide End Mills
Series 47N0 •With Neck • VariMill • Victory Grades
Material
Group
Side Milling (A)
and Slotting (B) WP15PE Recommended feed per tooth (fz = mm/th) for side milling (A).
For slotting (B), reduce fz by 20%.
AB
Cutting Speed — vc
m/min D1 — Diameter
ap ae ap min max mm 5,0 6,0 8,0 10,0 12,0 14,0 16,0 18,0 20,0
P
01,25 x D 0,5 x D 1 x D 150 – 200 fz 0,036 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114
11,25 x D 0,5 x D 1 x D 150 – 200 fz 0,036 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114
21,25 x D 0,5 x D 1 x D 140 – 190 fz 0,036 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114
31,25 x D 0,5 x D 1 x D 120 – 160 fz 0,030 0,036 0,050 0,061 0,070 0,079 0,087 0,095 0,101
41,25 x D 0,5 x D 0,75 x D 90 – 150 fz 0,027 0,033 0,045 0,054 0,062 0,070 0,077 0,083 0,088
51,25 x D 0,5 x D 1 x D 60 – 100 fz 0,024 0,029 0,040 0,048 0,056 0,063 0,070 0,076 0,081
61,25 x D 0,5 x D 0,75 x D 50 – 75 fz 0,020 0,025 0,034 0,040 0,047 0,052 0,057 0,061 0,065
M
11,25 x D 0,5 x D 1 x D 90 – 115 fz 0,030 0,036 0,050 0,061 0,070 0,079 0,087 0,095 0,101
21,25 x D 0,5 x D 1 x D 60 – 80 fz 0,024 0,029 0,040 0,048 0,056 0,063 0,070 0,076 0,081
31,25 x D 0,5 x D 1 x D 60 – 70 fz 0,020 0,025 0,034 0,040 0,047 0,052 0,057 0,061 0,065
K
11,25 x D 0,5 x D 1 x D 120 – 150 fz 0,036 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114
21,25 x D 0,5 x D 1 x D 110 – 140 fz 0,030 0,036 0,050 0,061 0,070 0,079 0,087 0,095 0,101
31,25 x D 0,5 x D 1 x D 110 – 130 fz 0,024 0,029 0,040 0,048 0,056 0,063 0,070 0,076 0,081
S
11 x D 0,3 x D 0,3 x D 50 – 90 fz 0,030 0,036 0,050 0,061 0,070 0,079 0,087 0,095 0,101
21 x D 0,3 x D 0,3 x D 25 – 40 fz 0,016 0,019 0,026 0,032 0,037 0,042 0,046 0,050 0,054
31,25 x D 0,5 x D 1 x D 60 – 80 fz 0,024 0,029 0,040 0,048 0,056 0,063 0,070 0,076 0,081
41,25 x D 0,5 x D 1 x D 50 – 60 fz 0,021 0,026 0,037 0,045 0,052 0,058 0,064 0,069 0,074
H11,25 x D 0,5 x D 0,75 x D 80 – 140 fz 0,027 0,033 0,045 0,054 0,062 0,070 0,077 0,083 0,088
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group.
Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on >12mm diameters.
WID_Master16_SolidEndMilling_HighPerformance_O020_O021_Metric_REBRAND.indd 20 11/11/15 9:37 AM
LViWID M 16 S lidE dMilli Hi hP f O020 O021 M i REBRANDN b 112015847AM
HydroForce™
HT Chuck
• HydroForce gives you an unmatched combination of accuracy and clamping forces.
• Compact and stable design.
• Advanced hydraulic clamping with lowest runout and superior vibration dampening.
• Balanced quality to lower vibration, especially at high speeds.
• Focused and fl exible product offering.
To learn more about our innovations, contact your local
Authorised Distributor or visit widia.com.
HydroForce™ HT Chuck High Torque for High Metal
Removal Rates (MRR) and Superior Surface Finish
WID_Master16_SolidEndMilling_HighPerformance_O020_O021_Metric_REBRAND.indd 21 11/11/15 9:37 AM
O22
LViWID M 16 S lidE dMilli Hi hP f O022 O023 M i REBRANDO b 29 20153 30PM
widia.com
Proprietary core design. 38° helix for roughing
and fi nishing operations.
Victory™ coating for
highest cutting data
and tool life.
Five unequally spaced fl utes
for highest feed rates
and reduced vibrations.
VariMill II end mills are the proven leader in the fi eld of high-performance, chatter-free
machining. They are designed to provide maximum metal removal rates and to achieve
supreme surface conditions. Utilising an innovative and proprietary design with unequal
fl ute spacing, VariMill II carbide end mills provide users with the most versatile technology
available, capable of outperforming other high-performance tools.
• 1 x D slotting in titanium and stainless steels with fi ve unequally spaced fl utes.
• Roughing and fi nishing with one tool.
• Various lengths-of-cut; necked and corner radius versions available.
VariMill II
High-Performance Solid Carbide End Mills •
VariMill II™
WID_Master16_SolidEndMilling_HighPerformance_O022_O023_Metric_REBRAND.indd 22 10/30/15 2:20 PM
O23
LViWID M 16 S lidE dMilli Hi hP f O022 O023 M i REBRANDO b 2920153 30PM
widia.com
577C Series 57NC Series
• Highest metal removal rates
and tool life in:
— Stainless steels, steels,
and alloyed steels.
— Cast iron.
— High-temperature
alloys and titanium.
• Corner radii and sharp edges.
• Titanium and stainless steel
geometry design.
• Radii corner and neck design
for depths requiring additional
passes.
VariMill II™ Series
• Five unequally spaced fl utes boosting your output with higher feed rates.
• Centre cutting.
• Roughing and fi nishing with one tool.
• Less passes due to 1 x D slotting capability on almost all materials, including titanium.
WID_Master16_SolidEndMilling_HighPerformance_O022_O023_Metric_REBRAND.indd 23 10/30/15 2:20 PM
O24
LViWID M 16 S lidE dMilli Hi hP f O024 O025 M i REBRANDN b 11 20158 48AM
widia.com
High-Performance Solid Carbide End Mills • VariMill™
Series 577C • VariMill II™ •With Centre Cut • Victory™ Grades
Series 577C • VariMill II • With Centre Cut • Victory Grades
WP15PE WP15PE
• Unequal ute spacing.
• Centre cutting.
• Single tool for both roughing and nishing
operations requiring fewer setups.
• Slotting up to 1 x D.
• Standard items listed. Additional styles
and coatings made-to-order.
rst choice
alternate choice
End Mill Tolerances
D1 tolerance e8 D
tolerance h6
+ / -
) 3 -0,014/-0,028 ) 3 0/-0,006
> 3-6 -0,020/-0,038 > 3–6 0/-0,008
> 6–10 -0,025/-0,047 > 6–10 0/-0,009
> 10–18 -0,032/-0,059 > 10–18 0/-0,011
> 18–30 -0,040/-0,073 > 18–30 0/-0,013
High-Performance Solid Carbide End Mills
grade WP15PE
AlTiN
order # catalogue #
grade WP15PE
AlTiN
order # catalogue # D1 D
length of cut
Ap1 max
length
LR¡
5578866 577C04002T 5578867 577C04002W 4,0 6 11,00 55 0,25
5578868 577C04012T – 4,0 6 11,00 55 —
5578990 577C05002T 5578991 577C05002W 5,0 6 13,00 57 0,25
5578992 577C06002T 5578993 577C06002W 6,0 6 13,00 57 0,40
5578994 577C06012T – 6,0 6 13,00 57 —
5578995 577C07003T 5578996 577C07003W 7,0 8 16,00 63 0,40
5578997 577C08003T 5578998 577C08003W 8,0 8 19,00 63 0,50
5578999 577C08013T – 8,0 8 19,00 63 —
5579021 577C09004T 5579022 577C09004W 9,0 10 19,00 72 0,50
5579023 577C10004T 5579024 577C10004W 10,0 10 22,00 72 0,50
5579025 577C10014T – 10,0 10 22,00 72 —
5579026 577C12005T 5579027 577C12005W 12,0 12 26,00 83 0,75
5579028 577C12015T – 12,0 12 26,00 83 —
5579029 577C14004T 5579040 577C14004W 14,0 14 26,00 83 0,75
5579041 577C14014T – 14,0 14 26,00 83 —
5579042 577C16006T 5579043 577C16006W 16,0 16 32,00 92 0,75
5579044 577C16016T – 16,0 16 32,00 92 —
5579045 577C18008T 5579046 577C18008W 18,0 18 32,00 92 0,75
5579047 577C20007T 5579048 577C20007W 20,0 20 38,00 104 0,75
5579049 577C20017T – 20,0 20 38,00 104 —
5579060 577C25008T 5579061 577C25008W 25,0 25 45,00 121 0,75
WID_Master16_SolidEndMilling_HighPerformance_O024_O025_Metric_REBRAND.indd 24 11/11/15 9:37 AM
O25
LViWID M 16 S lidE dMilli Hi hP f O024 O025 M i REBRANDN b 112015848AM
widia.com
High-Performance Solid Carbide End Mills
WS15PE WS15PE
High-Performance Solid Carbide End Mills • VariMill™
Series 57NC • VariMill II™ • With Neck • With Centre Cut • Victory™ Grades
Series 57NC • VariMill II • With Neck • With Centre Cut • Victory Grades
WS15PE
AlTiN
order # catalogue #
WS15PE
AlTiN
order # catalogue # D1 D D3
length of cut
Ap1 max L3
length
LR¡
5598906 57NC06002T — 6,0 6 5,64 13,00 18,00 63 —
5598907 57NC06022T 5598908 57NC06022W 6,0 6 5,64 13,00 18,00 63 0,50
5598909 57NC06032T 5599070 57NC06032W 6,0 6 5,64 13,00 18,00 63 1,00
— 5599071 57NC06042W 6,0 6 5,64 13,00 18,00 63 1,50
5599072 57NC08003T — 8,0 8 7,52 19,00 24,00 76 —
5599073 57NC08023T 5599074 57NC08023W 8,0 8 7,52 19,00 24,00 76 0,50
5599075 57NC08033T 5599076 57NC08033W 8,0 8 7,52 19,00 24,00 76 1,00
— 5599077 57NC08053W 8,0 8 7,52 19,00 24,00 76 2,00
5599078 57NC10004T — 10,0 10 9,40 22,00 30,00 76 —
5599079 57NC10024T 5599080 57NC10024W 10,0 10 9,40 22,00 30,00 76 0,50
5599081 57NC10034T 5599082 57NC10034W 10,0 10 9,40 22,00 30,00 76 1,00
5599083 57NC10054T 5599084 57NC10054W 10,0 10 9,40 22,00 30,00 76 2,00
5599085 57NC12005T — 12,0 12 11,28 26,00 36,00 83 —
5599086 57NC12025T 5599087 57NC12025W 12,0 12 11,28 26,00 36,00 83 0,50
5599088 57NC12035T 5599089 57NC12035W 12,0 12 11,28 26,00 36,00 83 1,00
5599090 57NC12055T 5599091 57NC12055W 12,0 12 11,28 26,00 36,00 83 2,00
5599092 57NC16006T — 16,0 16 15,04 32,00 48,00 100 —
5599093 57NC16026T 5598905 57NC16026W 16,0 16 15,04 32,00 48,00 100 0,50
5599094 57NC16036T 5599095 57NC16036W 16,0 16 15,04 32,00 48,00 100 1,00
5599096 57NC16056T 5599097 57NC16056W 16,0 16 15,04 32,00 48,00 100 2,00
• Unequal ute spacing.
• Centre cutting.
• Single tool for both roughing and nishing
operations requiring fewer setups.
• Slotting up to 1 x D.
• Standard items listed. Additional styles
and coatings made-to-order.
rst choice
alternate choice
End Mill Tolerances
D1 tolerance e8 D
tolerance h6
+ / -
) 3 -0,014/-0,028 ) 3 0/-0,006
> 3-6 -0,020/-0,038 > 3–6 0/-0,008
> 6–10 -0,025/-0,047 > 6–10 0/-0,009
> 10–18 -0,032/-0,059 > 10–18 0/-0,011
> 18–30 -0,040/-0,073 > 18–30 0/-0,013
(continued)
WID_Master16_SolidEndMilling_HighPerformance_O024_O025_Metric_REBRAND.indd 25 11/11/15 9:37 AM
O26
LViWID M 16 S lidE dMilli Hi hP f O026 O027 M i REBRANDO b 20 20153 52PM
widia.com
WS15PE WS15PE
High-Performance Solid Carbide End Mills • VariMill™
Series 57NC • VariMill II™ • With Neck • With Centre Cut • Victory™ Grades
WS15PE
AlTiN
order # catalogue #
WS15PE
AlTiN
order # catalogue # D1 D D3
length of cut
Ap1 max L3
length
LR¡
5599098 57NC16076T 5599099 57NC16076W 16,0 16 15,04 32,00 48,00 100 3,00
5599100 57NC20007T — 20,0 20 18,80 38,00 60,00 115 —
5599101 57NC20027T 5599102 57NC20027W 20,0 20 18,80 38,00 60,00 115 0,50
5599103 57NC20037T 5599104 57NC20037W 20,0 20 18,80 38,00 60,00 115 1,00
5599105 57NC20057T 5599106 57NC20057W 20,0 20 18,80 38,00 60,00 115 2,00
5599107 57NC20077T 5599108 57NC20077W 20,0 20 18,80 38,00 60,00 115 3,00
5599109 57NC20087T 5599110 57NC20087W 20,0 20 18,80 38,00 60,00 115 4,00
5599111 57NC25008T — 25,0 25 23,50 45,00 75,00 135 —
5599112 57NC25028T 5599113 57NC25028W 25,0 25 23,50 45,00 75,00 135 0,50
5599114 57NC25038T 5599115 57NC25038W 25,0 25 23,50 45,00 75,00 135 1,00
5599116 57NC25058T 5599117 57NC25058W 25,0 25 23,50 45,00 75,00 135 2,00
5599118 57NC25078T 5599119 57NC25078W 25,0 25 23,50 45,00 75,00 135 3,00
5599120 57NC25088T 5599121 57NC25088W 25,0 25 23,50 45,00 75,00 135 4,00
High-Performance Solid Carbide End Mills
(Series 57NC • VariMill II • With Neck • With Centre Cut • Victory Grades — continued)
rst choice
alternate choice
WID_Master16_SolidEndMilling_HighPerformance_O026_O027_Metric_REBRAND.indd 26 10/30/15 2:20 PM
O27
LViWID M 16 S lidE dMilli Hi hP f O026 O027 M i REBRANDO b 2020153 52PM
widia.com
High-Performance Solid Carbide End Mills
High-Performance Solid Carbide End Mills • VariMill™
Application Data • Series 577C • VariMill II™ • Victory™ Grades
Series 577C • VariMill II • Victory Grades
Material
Group
Side Milling (A)
and Slotting (B) WP15PE Recommended feed per tooth (fz = mm/th) for side milling (A).
For slotting (B), reduce fz by 20%.
AB
Cutting Speed — vc
m/min D1 — Diameter
ap ae ap min max mm 6,0 8,0 10,0 12,0 14,0 16,0 18,0 20,0 25,0
P
01,5 x D 0,5 x D 1 x D 150 – 200 fz 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114 0,124
11,5 x D 0,5 x D 1 x D 150 – 200 fz 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114 0,124
21,5 x D 0,5 x D 1 x D 140 – 190 fz 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114 0,124
31,5 x D 0,5 x D 1 x D 120 – 160 fz 0,036 0,050 0,061 0,070 0,079 0,087 0,095 0,101 0,114
41,5 x D 0,5 x D 0,75 x D 90 – 150 fz 0,033 0,045 0,054 0,062 0,070 0,077 0,083 0,088 0,098
51,5 x D 0,5 x D 1 x D 60 – 100 fz 0,029 0,040 0,048 0,056 0,063 0,070 0,076 0,081 0,091
M
11,5 x D 0,5 x D 1 x D 90 – 115 fz 0,036 0,050 0,061 0,070 0,079 0,087 0,095 0,101 0,114
21,5 x D 0,5 x D 1 x D 60 – 80 fz 0,029 0,040 0,048 0,056 0,063 0,070 0,076 0,081 0,091
31,5 x D 0,5 x D 1 x D 60 – 70 fz 0,025 0,034 0,040 0,047 0,052 0,057 0,061 0,065 0,071
K
11,5 x D 0,5 x D 1 x D 120 – 150 fz 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114 0,124
21,5 x D 0,5 x D 1 x D 110 – 140 fz 0,036 0,050 0,061 0,070 0,079 0,087 0,095 0,101 0,114
31,5 x D 0,5 x D 1 x D 110 – 130 fz 0,029 0,040 0,048 0,056 0,063 0,070 0,076 0,081 0,091
S
11,5 x D 0,3 x D 0,3 x D 50 – 90 fz 0,036 0,050 0,061 0,070 0,079 0,087 0,095 0,101 0,114
21,5 x D 0,3 x D 0,3 x D 25 – 40 fz 0,019 0,026 0,032 0,037 0,042 0,046 0,050 0,054 0,061
31,5 x D 0,3 x D 1 x D 60 – 80 fz 0,029 0,040 0,048 0,056 0,063 0,070 0,076 0,081 0,091
41,5 x D 0,5 x D 1 x D 50 – 60 fz 0,026 0,037 0,045 0,052 0,058 0,064 0,069 0,074 0,084
H11,5 x D 0,5 x D 0,75 x D 80 – 140 fz 0,033 0,045 0,054 0,062 0,070 0,077 0,083 0,088 0,098
21,5 x D 0,2 x D 0,5 x D 70 – 120 fz 0,025 0,034 0,040 0,047 0,052 0,057 0,061 0,065 0,071
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group.
Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on >12mm diameters.
WID_Master16_SolidEndMilling_HighPerformance_O026_O027_Metric_REBRAND.indd 27 10/30/15 2:20 PM
O28
LViWID M 16 S lidE dMilli Hi hP f O028 O029 M i REBRANDO b 30 201512 07PM
widia.com
High-Performance Solid Carbide End Mills • VariMill™
Application Data • Series 57NC • VariMill II™ • With Neck • Victory™ Grades
High-Performance Solid Carbide End Mills
Series 57NC • VariMill II • With Neck • Victory Grades
Material
Group
Side Milling (A)
and Slotting (B) WS15PE Recommended feed per tooth (fz = mm/th) for side milling (A).
For slotting (B), reduce fz by 20%.
AB
Cutting Speed — vc
m/min D1 — Diameter
ap ae ap min max mm 6,0 8,0 10,0 12,0 14,0 16,0 18,0 20,0 25,0
P51,5 x D 0,5 x D 1 x D 60 – 100 fz 0,029 0,040 0,048 0,056 0,063 0,070 0,076 0,081 0,091
61,5 x D 0,5 x D 0,75 x D 50 – 75 fz 0,025 0,034 0,040 0,047 0,052 0,057 0,061 0,065 0,071
M
11,5 x D 0,5 x D 1 x D 90 – 115 fz 0,036 0,050 0,061 0,070 0,079 0,087 0,095 0,101 0,114
21,5 x D 0,5 x D 1 x D 60 – 80 fz 0,029 0,040 0,048 0,056 0,063 0,070 0,076 0,081 0,091
31,5 x D 0,5 x D 1 x D 60 – 70 fz 0,025 0,034 0,040 0,047 0,052 0,057 0,061 0,065 0,071
K
11,5 x D 0,5 x D 1 x D 120 – 150 fz 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114 0,124
21,5 x D 0,5 x D 1 x D 110 – 140 fz 0,036 0,050 0,061 0,070 0,079 0,087 0,095 0,101 0,114
31,5 x D 0,5 x D 1 x D 110 – 130 fz 0,029 0,040 0,048 0,056 0,063 0,070 0,076 0,081 0,091
S
11,5 x D 0,3 x D 0,3 x D 50 – 90 fz 0,036 0,050 0,061 0,070 0,079 0,087 0,095 0,101 0,114
21,5 x D 0,3 x D 0,3 x D 25 – 40 fz 0,019 0,026 0,032 0,037 0,042 0,046 0,050 0,054 0,061
31,5 x D 0,5 x D 1 x D 60 – 80 fz 0,029 0,040 0,048 0,056 0,063 0,070 0,076 0,081 0,091
41,5 x D 0,5 x D 1 x D 50 – 60 fz 0,026 0,037 0,045 0,052 0,058 0,064 0,069 0,074 0,084
H11,5 x D 0,5 x D 0,75 x D 80 – 140 fz 0,033 0,045 0,054 0,062 0,070 0,077 0,083 0,088 0,098
21,5 x D 0,2 x D 0,5 x D 70 – 120 fz 0,025 0,034 0,040 0,047 0,052 0,057 0,061 0,065 0,071
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group.
Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on >12mm diameters.
WID_Master16_SolidEndMilling_HighPerformance_O028_O029_Metric_REBRAND.indd 28 10/30/15 2:20 PM
LViWID M 16 S lidE dMilli Hi hP f O028 O029 M i REBRANDO b 30201512 07PM
Specifi cally engineered to machine hardened
steel up to 67 HRC at extreme speeds and feeds
• Unique tool with new 6-fl ute style for high productivity.
• Necked shanks provide extended reach in deep cavities.
• High feed rates, up to 0,6mm per tooth on a 20mm tool.
• Machine hardened materials at 2–3x the metal removal rate of competitive end mills.
• Wide range of cutting diameters: down to 6mm for small and medium pocket work.
• Innovative new geometry maximises metal removal rates.
• High metal removal rates and lower manufacturing costs.
To learn more about our innovations, contact your local Authorised Distributor
or visit widia.com.
X-Feed™ End Mills
for High-Feed
Milling
WID_Master16_SolidEndMilling_HighPerformance_O028_O029_Metric_REBRAND.indd 29 10/30/15 2:20 PM
O30
LViWID M 16 S lidE dMilli Hi hP f O030 O031 M i REBRANDJ 8 20167 11AM
widia.com
Engineered with Eccentric Relief (ER) grind at the cutting edges for greater edge strength, enabling
higher metal removal rates and increased productivity. The new VariMill II ER is the fi rst WIDIA™
off-the-shelf end mill available with SAFE-hOCK® by HAIMER, providing excellent stability,
eliminating end mill pullout, and increasing concentric tool clamping. Though primarily designed for
roughing and fi nishing applications in the aerospace industry, VariMill II ER can be used as a solution
for any titanium or stainless steel application and is capable of slotting, ramping, and plunging.
• High-performance tools for titanium and stainless steel workpiece materials.
• Roughing and fi nishing with one tool, lowering tool costs.
• Various radius and necked versions available.
• Standard offering with SAFE-hOCK® by HAIMER .
®
Centre cutting for
plunging and ramping.
Multi-stage core design.
38° helix for roughing
and fi nishing operations.
SAFE-hOCK® shank prevents
end mill pullout and enables
higher feed rates.
Victory™ coating for highest
cutting conditions and tool life.
Eccentric relief grind improves edge
stability and enables higher feed rates.
Unequal fl ute spacing
reduces vibrations.
VariMill II ER
High-Performance Solid Carbide End Mills •
VariMill II™ ER
WID_Master16_SolidEndMilling_HighPerformance_O030_O031_Metric_REBRAND.indd 30 1/8/16 7:11 AM
O31
LViWID M 16 S lidE dMilli Hi hP f O030 O031 M i REBRANDJ 820167 11AM
widia.com
VariMill II™ ER Series
• Unique geometry providing increased tool life and higher metal removal rates in
diffi cult-to-machine workpiece materials.
• Increased output due to fewer tool changes and higher metal removal rates.
• Roughing and fi nishing with one tool, lowering tool costs.
• 1 x D slotting capability requires less passes, increasing productivity.
577E Series 57NE Series
• Eccentric relief for edge
stability and strength.
• Extensive radii corner
offering.
• Eccentric relief for edge
stability and strength.
• Extensive radii corner
offering.
• Neck design for depths
requiring additional passes.
Application Example
Side milling of INCONEL® 718 component.
Workpiece material: INCONEL 718
Tool: D = 16mm
Cutting data: ap = 27,43mm
ae = 1,3mm
vc = 19,8 m/min
fz = 0,05 mm/th
Result: Increased tool life from 2 years to 5.
WID_Master16_SolidEndMilling_HighPerformance_O030_O031_Metric_REBRAND.indd 31 1/8/16 7:11 AM
O32
LViWID M 16 S lidE dMilli Hi hP f O032 O033 M i REBRANDN b 11 20158 48AM
widia.com
High-Performance Solid Carbide End Mills • VariMill™
Series 577E • VariMill II™ ER • Victory™ Grades
End Mill Tolerances
D1 tolerance e8 D
tolerance h6
+ / -
) 3 -0,014/-0,028 ) 3 0/-0,006
> 3–6 -0,020/-0,038 > 3–6 0/-0,008
> 6–10 -0,025/-0,047 > 6–10 0/-0,009
> 10–18 -0,032/-0,059 > 10–18 0/-0,011
> 18–30 -0,040/-0,073 > 18–30 0/-0,013
Series 577E • VariMill II ER • Victory Grades
WS15PE WS15PE WS15PE
High-Performance Solid Carbide End Mills
• Unequal ute spacing.
• Centre cutting.
• Optimised geometry for titanium
machining.
• Single tool for both roughing and nishing
operations requiring fewer setups.
• Standard items listed. Additional styles
and coatings made-to-order.
rst choice
alternate choice
WS15PE
AlTiN
order # catalogue #
WS15PE
AlTiN
order # catalogue #
WS15PE
AlTiN
order # catalogue # D1 D
length of cut
Ap1 max
length
LR
¡
5599171 577E10004T – – 10,0 10 22,00 72 —
5599172 577E10024T – 5599173 577E10024W 10,0 10 22,00 72 0,50
– 5599174 577E12005V – 12,0 12 26,00 83 —
– 5599175 577E12015V 5599176 577E12015W 12,0 12 26,00 83 0,75
– 5599177 577E16006V – 16,0 16 32,00 92 —
– 5599178 577E16016V 5599179 577E16016W 16,0 16 32,00 92 0,75
– 5599180 577E20007V – 20,0 20 38,00 104 —
– 5599181 577E20017V 5599182 577E20017W 20,0 20 38,00 104 0,75
– 5599183 577E25018V 5599184 577E25018W 25,0 25 45,00 121 0,75
WID_Master16_SolidEndMilling_HighPerformance_O032_O033_Metric_REBRAND.indd 32 11/11/15 9:37 AM
O33
LViWID M 16 S lidE dMilli Hi hP f O032 O033 M i REBRANDN b 112015848AM
widia.com
High-Performance Solid Carbide End Mills • VariMill™
Series 57NE • VariMill II™ ER • With Neck • Victory™ Grades
Series 57NE • VariMill II ER • With Neck • Victory Grades
WS15PE WS15PE WS15PE
• Unequal ute spacing.
• Centre cutting.
• Optimised geometry for titanium
machining.
• Single tool for both roughing and nishing
operations requiring fewer setups.
• Standard items listed. Additional styles
and coatings made-to-order.
rst choice
alternate choice
End Mill Tolerances
D1 tolerance e8 D
tolerance h6
+ / -
) 3 -0,014/-0,028 ) 3 0/-0,006
> 3–6 -0,020/-0,038 > 3–6 0/-0,008
> 6–10 -0,025/-0,047 > 6–10 0/-0,009
> 10–18 -0,032/-0,059 > 10–18 0/-0,011
> 18–30 -0,040/-0,073 > 18–30 0/-0,013
High-Performance Solid Carbide End Mills
WS15PE
AlTiN
order # catalogue #
WS15PE
AlTiN
order # catalogue #
WS15PE
AlTiN
order # catalogue # D1 D D3
length of cut
Ap1 max L3
length
LR¡
5599122 57NE10004T — — 10,0 10 9,40 22,00 30,00 76 —
5599123 57NE10024T — 5599124 57NE10024W 10,0 10 9,40 22,00 30,00 76 0,50
5599125 57NE10034T — 5599126 57NE10034W 10,0 10 9,40 22,00 30,00 76 1,00
5599127 57NE10054T — 5599128 57NE10054W 10,0 10 9,40 22,00 30,00 76 2,00
— 5599129 57NE12005V — 12,0 12 11,28 26,00 36,00 83 —
— 5599130 57NE12025V 5599131 57NE12025W 12,0 12 11,28 26,00 36,00 83 0,50
— 5599132 57NE12035V 5599133 57NE12035W 12,0 12 11,28 26,00 36,00 83 1,00
— 5599134 57NE12055V 5599135 57NE12055W 12,0 12 11,28 26,00 36,00 83 2,00
— 5599136 57NE16006V — 16,0 16 15,04 32,00 48,00 100 —
— 5599137 57NE16026V 5599138 57NE16026W 16,0 16 15,04 32,00 48,00 100 0,50
— 5599139 57NE16036V 5599140 57NE16036W 16,0 16 15,04 32,00 48,00 100 1,00
— 5599141 57NE16056V 5599142 57NE16056W 16,0 16 15,04 32,00 48,00 100 2,00
— 5599143 57NE20007V — 20,0 20 18,80 38,00 60,00 115 —
— 5599144 57NE20027V 5599145 57NE20027W 20,0 20 18,80 38,00 60,00 115 0,50
— 5599146 57NE20037V 5599147 57NE20037W 20,0 20 18,80 38,00 60,00 115 1,00
— 5599148 57NE20057V 5599149 57NE20057W 20,0 20 18,80 38,00 60,00 115 2,00
— 5599160 57NE20087V 5599161 57NE20087W 20,0 20 18,80 38,00 60,00 115 4,00
— 5599162 57NE25008V — 25,0 25 23,50 45,00 75,00 135 —
— 5599163 57NE25028V 5599164 57NE25028W 25,0 25 23,50 45,00 75,00 135 0,50
— 5599165 57NE25038V 5599166 57NE25038W 25,0 25 23,50 45,00 75,00 135 1,00
— 5599167 57NE25058V 5599168 57NE25058W 25,0 25 23,50 45,00 75,00 135 2,00
— 5599169 57NE25088V 5599170 57NE25088W 25,0 25 23,50 45,00 75,00 135 4,00
WID_Master16_SolidEndMilling_HighPerformance_O032_O033_Metric_REBRAND.indd 33 11/11/15 9:37 AM
O34
LViWID M 16 S lidE dMilli Hi hP f O034 O035 M i REBRANDO b 20 20153 51PM
widia.com
High-Performance Solid Carbide End Mills • VariMill™
Application Data • Series 577E • VariMill II™ ER • Victory™ Grades
High-Performance Solid Carbide End Mills
Series 577E • VariMill II ER • Victory Grades
Material
Group
Side Milling (A)
and Slotting (B) WS15PE Recommended feed per tooth (fz = mm/th) for side milling (A).
For slotting (B), reduce fz by 20%.
AB
Cutting Speed — vc
m/min D1 — Diameter
ap ae ap min max mm 10,0 12,0 16,0 18,0 20,0 25,0
P51,5 x D 0,5 x D 1 x D 60 – 100 fz 0,048 0,056 0,070 0,076 0,081 0,091
61,5 x D 0,5 x D 0,75 x D 50 – 75 fz 0,040 0,047 0,057 0,061 0,065 0,071
M
11,5 x D 0,5 x D 1 x D 90 – 115 fz 0,061 0,070 0,087 0,095 0,101 0,114
21,5 x D 0,5 x D 1 x D 60 – 80 fz 0,048 0,056 0,070 0,076 0,081 0,091
31,5 x D 0,5 x D 1 x D 60 – 70 fz 0,040 0,047 0,057 0,061 0,065 0,071
S
11,5 x D 0,3 x D 0,3 x D 50 – 90 fz 0,061 0,070 0,087 0,095 0,101 0,114
21,5 x D 0,3 x D 0,3 x D 50 – 90 fz 0,032 0,037 0,046 0,050 0,054 0,061
31,5 x D 0,3 x D 1 x D 25 – 40 fz 0,048 0,056 0,070 0,076 0,081 0,091
41,5 x D 0,5 x D 1 x D 50 – 60 fz 0,045 0,052 0,064 0,069 0,074 0,084
H11,5 x D 0,5 x D 0,75 x D 80 – 140 fz 0,054 0,062 0,077 0,083 0,088 0,098
21,5 x D 0,2 x D 0,5 x D 70 – 120 fz 0,040 0,047 0,057 0,061 0,065 0,071
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group.
Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on >12mm diameters.
WID_Master16_SolidEndMilling_HighPerformance_O034_O035_Metric_REBRAND.indd 34 10/30/15 2:20 PM
O35
LViWID M 16 S lidE dMilli Hi hP f O034 O035 M i REBRANDO b 2020153 51PM
widia.com
High-Performance Solid Carbide End Mills • VariMill™
Application Data • Series 57NE • VariMill II™ ER • With Neck • Victory™ Grades
High-Performance Solid Carbide End Mills
Series 57NE • VariMill II ER • With Neck • Victory Grades
Material
Group
Side Milling (A)
and Slotting (B) WS15PE Recommended feed per tooth (fz = mm/th) for side milling (A).
For slotting (B), reduce fz by 20%.
AB
Cutting Speed — vc
m/min D1 — Diameter
ap ae ap min max mm 10,0 12,0 16,0 18,0 20,0 25,0
P51,5 x D 0,5 x D 1 x D 60 – 100 fz 0,048 0,056 0,070 0,076 0,081 0,091
61,5 x D 0,5 x D 0,75 x D 50 – 75 fz 0,040 0,047 0,057 0,061 0,065 0,071
M
11,5 x D 0,5 x D 1 x D 90 – 115 fz 0,061 0,070 0,087 0,095 0,101 0,114
21,5 x D 0,5 x D 1 x D 60 – 80 fz 0,048 0,056 0,070 0,076 0,081 0,091
31,5 x D 0,5 x D 1 x D 60 – 70 fz 0,040 0,047 0,057 0,061 0,065 0,071
S
11,5 x D 0,3 x D 0,3 x D 50 – 90 fz 0,061 0,070 0,087 0,095 0,101 0,114
21,5 x D 0,3 x D 0,3 x D 25 – 50 fz 0,032 0,037 0,046 0,050 0,054 0,061
31,5 x D 0,3 x D 1 x D 40 – 90 fz 0,048 0,056 0,070 0,076 0,081 0,091
41,5 x D 0,5 x D 1 x D 50 – 60 fz 0,045 0,052 0,064 0,069 0,074 0,084
H11,5 x D 0,5 x D 0,75 x D 80 – 140 fz 0,054 0,062 0,077 0,083 0,088 0,098
21,5 x D 0,2 x D 0,5 x D 70 – 120 fz 0,040 0,047 0,057 0,061 0,065 0,071
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group.
Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on >12mm diameters.
WID_Master16_SolidEndMilling_HighPerformance_O034_O035_Metric_REBRAND.indd 35 10/30/15 2:20 PM
O36
LViWID M 16 S lidE dMilli Hi hP f O036 O037 M i REBRANDN b 12 20158 55AM
widia.com
Innovative core design
enables highest feed rates.
43° helix improves fi nishing results.
AlTiN coating for highest
cutting data and tool life.
Optimised for wall straightness.
Five unequally spaced fl utes
for highest feed rates
and reduced vibrations.
High-Performance Solid Carbide End Mills •
VariMill II™ Long
VariMill II Long
Designed to achieve highest surface quality and tool life in titanium, stainless steels, and
steels. Innovative core and tool geometry design enable chatter-free corner machining in
one pass. VariMill II Long covers 4 x D lengths-of-cut for semi-fi nishing and fi ne fi nishing
operations with radii and sharp corner versions from stock.
• Tailored 43° helix improves surface fi nish.
• Less passes in side milling with 4 x D length-of-cut capability.
• One tool for semi-fi nishing and fi ne fi nishing operations.
• No need for feed rate reduction when machining corners.
WID_Master16_SolidEndMilling_HighPerformance_O036_O037_Metric_REBRAND.indd 36 11/12/15 9:55 AM
O37
LViWID M 16 S lidE dMilli Hi hP f O036 O037 M i REBRANDN b 122015855AM
widia.com
VariMill II™ Long Series
• Achieve excellent surface fi nish and outstanding wall straightness.
• Benefi t from high accuracy even with thin wall machining.
• Simplify your programming of cavities by keeping the feed rate
and radial engagement constant.
5718 Series
• Highest surface quality
and tool life in:
— Titanium
— Stainless steels
• Corner radii and sharp edges.
• 4 x D length of cut.
Application Example
Side milling 60° angled corner with constant feed rate.
Workpiece material: Titanium 6Al-4V
Tool: D = 15,875mm
Cutting data: ap = 63mm
ae = 0,5mm
vc = 100 m/min
fz = 0,06 mm/z
Result: Surface fi nish Ra 0,4 μm
WID_Master16_SolidEndMilling_HighPerformance_O036_O037_Metric_REBRAND.indd 37 11/12/15 9:55 AM
O38
LViWID M 16 S lidE dMilli Hi hP f O038 O039 M i REBRANDO b 20 20153 50PM
widia.com
AlTiN-MT
High-Performance Solid Carbide End Mills • VariMill™
Series 5718 • VariMill II™ Long • 4 x D Length of Cut
Series 5718 • VariMill II Long • 4 x D Length of Cut
grade AlTiN-MT
AlTiN
order # catalogue # D1 D
length of cut
Ap1 max
length
LR¡
5096566 571806002MT 6,0 6 24,00 76 —
5096567 571806012MT 6,0 6 24,00 76 0,50
5096568 571806022MT 6,0 6 24,00 76 1,00
5096569 571808003MT 8,0 8 32,00 76 —
5096660 571808013MT 8,0 8 32,00 76 0,50
5096661 571808023MT 8,0 8 32,00 76 1,00
4124297 571810004MT 10,0 10 40,00 100 —
5096662 571810014MT 10,0 10 40,00 100 0,50
5096664 571810034MT 10,0 10 40,00 100 2,00
5096665 571810044MT 10,0 10 40,00 100 2,50
4124298 571812005MT 12,0 12 48,00 125 —
5096667 571812025MT 12,0 12 48,00 125 1,00
5096668 571812035MT 12,0 12 48,00 125 2,00
5096669 571812045MT 12,0 12 48,00 125 2,50
4124299 571814014MT 14,0 14 56,00 120 —
5096752 571814024MT 14,0 14 56,00 120 1,00
5096753 571814034MT 14,0 14 56,00 120 2,00
5096754 571814044MT 14,0 14 56,00 120 3,00
5096755 571814054MT 14,0 14 56,00 120 4,00
4124300 571816006MT 16,0 16 64,00 141 —
• Unequal ute spacing.
• Non-centre cutting.
• For nishing and semi-nishing
applications.
• Standard items listed. Additional
styles and coatings made-to-order.
rst choice
alternate choice
End Mill Tolerances
D1 tolerance e8 D
tolerance h6
+ / -
) 3 -0,014/-0,028 ) 3 0/-0,006
> 3–6 -0,020/-0,038 > 3–6 0/-0,008
> 6–10 -0,025/-0,047 > 6–10 0/-0,009
> 10–18 -0,032/-0,059 > 10–18 0/-0,011
> 18–30 -0,040/-0,073 > 18–30 0/-0,013
High-Performance Solid Carbide End Mills
(continued)
WID_Master16_SolidEndMilling_HighPerformance_O038_O039_Metric_REBRAND.indd 38 10/30/15 2:20 PM
O39
LViWID M 16 S lidE dMilli Hi hP f O038 O039 M i REBRANDO b 2020153 50PM
widia.com
AlTiN-MT
grade AlTiN-MT
AlTiN
order # catalogue # D1 D
length of cut
Ap1 max
length
LR¡
5096756 571816016MT 16,0 16 64,00 141 0,50
5096757 571816026MT 16,0 16 64,00 141 1,00
5096758 571816036MT 16,0 16 64,00 141 2,00
5096759 571816046MT 16,0 16 64,00 141 3,00
5096800 571816056MT 16,0 16 64,00 141 4,00
4124301 571818018MT 18,0 18 72,00 150 —
5096801 571818028MT 18,0 18 72,00 150 1,00
5096802 571818038MT 18,0 18 72,00 150 2,00
5096803 571818048MT 18,0 18 72,00 150 3,00
5096804 571818058MT 18,0 18 72,00 150 4,00
4124302 571820007MT 20,0 20 80,00 150 —
5096805 571820017MT 20,0 20 80,00 150 0,50
5096806 571820027MT 20,0 20 80,00 150 1,00
5096807 571820037MT 20,0 20 80,00 150 2,00
5096808 571820047MT 20,0 20 80,00 150 3,00
5096809 571820057MT 20,0 20 80,00 150 4,00
4124323 571825008MT 25,0 25 100,00 170 —
5096860 571825018MT 25,0 25 100,00 170 0,50
5096861 571825028MT 25,0 25 100,00 170 1,00
5096862 571825038MT 25,0 25 100,00 170 2,00
5096863 571825048MT 25,0 25 100,00 170 3,00
5096864 571825058MT 25,0 25 100,00 170 4,00
rst choice
alternate choice
(Series 5718 • VariMill II Long • 4 x D Length of Cut — continued)
High-Performance Solid Carbide End Mills • VariMill™
Series 5718 • VariMill II™ Long • 4 x D Length of Cut
High-Performance Solid Carbide End Mills
WID_Master16_SolidEndMilling_HighPerformance_O038_O039_Metric_REBRAND.indd 39 10/30/15 2:20 PM
O40
LViWID M 16 S lidE dMilli Hi hP f O040 O041 M i REBRANDJ 8 20167 11AM
widia.com
LViWID M 16 S lidE dMilli Hi hP f O040 O041 M i REBRANDJ 8 20167 11AM
High-Performance Solid Carbide End Mills • VariMill™
Application Data • Series 5718 • VariMill II™ Long • 4 x D Length of Cut
High-Performance Solid Carbide End Mills
Series 5718 • VariMill II Long • 4 x D Length of Cut
Material
Group
Side Milling (A) AlTiN Recommended feed per tooth (fz = mm/th) for side milling (A).
For slotting (B), reduce fz by 20%.
ACutting Speed — vc
m/min D1 — Diameter
ap ae min max mm 6,0 8,0 10,0 12,0 14,0 16,0 18,0 20,0 25,0
P
0
Ap1 max 0,05 x D* 300 – 400 fz 0,053 0,072 0,086 0,099 0,111 0,121 0,130 0,137 0,149
1
Ap1 max 0,05 x D* 300 – 400 fz 0,053 0,072 0,086 0,099 0,111 0,121 0,130 0,137 0,149
2
Ap1 max 0,05 x D* 280 – 380 fz 0,053 0,072 0,086 0,099 0,111 0,121 0,130 0,137 0,149
3
Ap1 max 0,05 x D* 240 – 320 fz 0,044 0,060 0,073 0,084 0,095 0,105 0,113 0,121 0,137
4
Ap1 max 0,05 x D* 180 – 300 fz 0,039 0,054 0,065 0,075 0,084 0,092 0,099 0,106 0,117
5
Ap1 max 0,05 x D* 120 – 200 fz 0,035 0,048 0,058 0,067 0,076 0,084 0,091 0,097 0,109
6
Ap1 max 0,05 x D* 100 – 150 fz 0,030 0,040 0,048 0,056 0,062 0,068 0,073 0,078 0,085
M
1
Ap1 max 0,05 x D* 180 – 230 fz 0,044 0,060 0,073 0,084 0,095 0,105 0,113 0,121 0,137
2
Ap1 max 0,05 x D* 120 – 160 fz 0,035 0,048 0,058 0,067 0,076 0,084 0,091 0,097 0,109
3
Ap1 max 0,05 x D* 120 – 140 fz 0,030 0,040 0,048 0,056 0,062 0,068 0,073 0,078 0,085
K
1
Ap1 max 0,05 x D* 240 – 300 fz 0,053 0,072 0,086 0,099 0,111 0,121 0,130 0,137 0,149
2
Ap1 max 0,05 x D* 220 – 280 fz 0,044 0,060 0,073 0,084 0,095 0,105 0,113 0,121 0,137
3
Ap1 max 0,05 x D* 220 – 260 fz 0,035 0,048 0,058 0,067 0,076 0,084 0,091 0,097 0,109
S
1
Ap1 max 0,05 x D* 100 – 180 fz 0,044 0,060 0,073 0,084 0,095 0,105 0,113 0,121 0,137
2
Ap1 max 0,05 x D* 50 – 80 fz 0,023 0,032 0,038 0,045 0,050 0,056 0,060 0,065 0,074
3
Ap1 max 0,05 x D* 120 – 160 fz 0,035 0,048 0,058 0,067 0,076 0,084 0,091 0,097 0,109
4
Ap1 max 0,05 x D* 100 – 120 fz 0,031 0,044 0,053 0,062 0,070 0,077 0,083 0,089 0,100
H1
Ap1 max 0,05 x D* 160 – 280 fz 0,039 0,054 0,065 0,075 0,084 0,092 0,099 0,106 0,117
2
Ap1 max 0,06 x D* 140 – 240 fz 0,030 0,040 0,048 0,056 0,062 0,068 0,073 0,078 0,085
* For the above cutting data, do not exceed an overall ae of 0,8mm.
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group.
Above parameters are based on ideal conditions. For smaller taper machinining centres, please adjust parameters accordingly on >12mm diameters.
WID_Master16_SolidEndMilling_HighPerformance_O040_O041_Metric_REBRAND.indd 40 1/8/16 7:11 AM
AluSurf™ Carbide End Mills for High Metal Removal Rates
and Superior Surface Finishes
Designed to
signifi cantly
reduce machining
time in
aluminium!
• Use only one tool for roughing and fi nishing operations.
• Slotting is effective up to full, 1 x D axial depth; side milling (profi ling) is effective
up to 0.5 x D, radial by 1.5 x D axial depth.
• Three-fl ute series uses unequal fl ute spacing for chatter-free performance.
• Effective in a full range of machine speeds.
• Multiple corner radii and extended neck confi gurations are available as standard.
To learn more about our innovations, contact your local
Authorised Distributor or visit widia.com.
WID_Master16_SolidEndMilling_HighPerformance_O040_O041_Metric_REBRAND.indd 41 11/12/15 9:55 AM
O42
LViWID M 16 S lidE dMilli Hi hP f O042 O043 M i REBRANDO b 29 20153 00PM
widia.com
The trend towards more effi ciency and increased productivity using high-speed machining
techniques such as trochoidal and peel milling will continue to be a focus for aerospace
components. The new VariMill III ER is designed to provide the highest Metal Removal Rates
(MRR) and extended tool life in the most demanding materials in the aerospace industry.
VariMill III ER is designed to be applied in titanium and stainless steel workpiece materials
for both semi-fi nishing and fi nishing applications.
• 7-fl ute eccentric relief design provides edge strength along with high productivity.
• Superior surface fi nishes and wall straightness capability from specialised core.
• Finishing and semi-fi nishing at up to 30% of the diameter with one tool.
• First choice for high-speed machining in diffi cult-to-cut workpiece materials.
Available with radii or
chamfered corner.
7-Flute Design
Superior fi nishes
especially suited for
high-speed machining.
Innovative core design
Superior wall straightness.
2 x D (necked), 3 x D,
and 5 x D standard.
Available with
SAFE-hOCK® shanks
Victory™ grade WS15PE™
Market-leading surface technology
using pre- and post-coat treatments.
Eccentric relief grind
Consistent edge quality.
®
High-Performance Solid Carbide End Mills •
VariMill III™ ER
VariMill III ER
WID_Master16_SolidEndMilling_HighPerformance_O042_O043_Metric_REBRAND.indd 42 10/30/15 2:20 PM
O43
LViWID M 16 S lidE dMilli Hi hP f O042 O043 M i REBRANDO b 2920153 00PM
widia.com
77NE Series 772E Series
• Titanium and stainless
steel geometry design.
• Corner radii and
chamfered corners.
• 2 x D length of cut.
• Necked 5 x D reach.
• Centre cutting.
• Titanium and stainless steel
geometry design.
• Corner radii and chamfered
corners.
• 5 x D length of cut.
• Centre cutting.
• SAFE-hOCK®.
771E Series
• Titanium and stainless
steel geometry design.
• Corner radii and
chamfered corners.
• 3 x D length of cut.
• Centre cutting.
VariMill III™ ER Series
• Seven unequally spaced fl utes provide the maximum output and surface quality.
• Eccentric relief for edge strength and stability.
• Semi-fi nishing and fi nishing with one tool.
• Victory™ grade WS15PE™ for increased heat and wear resistance.
WID_Master16_SolidEndMilling_HighPerformance_O042_O043_Metric_REBRAND.indd 43 10/30/15 2:21 PM
O44
LViWID M 16 S lidE dMilli Hi hP f O044 O045 M i REBRANDO b 20 20153 55PM
widia.com
WS15PE
AlTiN
order # catalogue #
High-Performance Solid Carbide End Mills • VariMill™
Series 77NE • VariMill III™ ER • With Neck • Victory™ Grades
Series 77NE • VariMill III ER • With Neck • Victory Grades
WS15PE
AlTiN
order # catalogue # D1 D D3
length of cut
Ap1 max L3
length
LR¡BCH
5978039 77NE10004T 10,0 10 9,40 22,00 30,00 76 — 0,50
5978040 77NE10024T 10,0 10 9,40 22,00 30,00 76 0,50 —
5978096 77NE12005T 12,0 12 11,28 26,00 36,00 83 — 0,50
5978097 77NE12025T 12,0 12 11,28 26,00 36,00 83 0,50 —
5978104 77NE16006T 16,0 16 15,04 32,00 48,00 100 — 0,50
5978105 77NE16026T 16,0 16 15,04 32,00 48,00 100 0,50 —
5978112 77NE20007T 20,0 20 18,80 38,00 60,00 115 — 0,50
5978113 77NE20027T 20,0 20 18,80 38,00 60,00 115 0,50 —
Detail X
rst choice
alternate choice
End Mill Tolerances
D1 tolerance e8 D
tolerance h6
+ / -
) 3 -0,014/-0,028 ) 3 0/-0,006
> 3–6 -0,020/-0,038 > 3–6 0/-0,008
> 6–10 -0,025/-0,047 > 6–10 0/-0,009
> 10–18 -0,032/-0,059 > 10–18 0/-0,011
> 18–30 -0,040/-0,073 > 18–30 0/-0,013
High-Performance Solid Carbide End Mills
• Unequal ute spacing.
• Centre cutting.
• Ramping angle 3°.
• Optimised for difcult-to-machine
workpiece materials.
• Semi-nishing to nishing applications.
• High-speed machining capability.
• Standard items listed. Additional styles
and coatings made-to-order.
WID_Master16_SolidEndMilling_HighPerformance_O044_O045_Metric_REBRAND.indd 44 10/30/15 2:21 PM
O45
LViWID M 16 S lidE dMilli Hi hP f O044 O045 M i REBRANDO b 2020153 55PM
widia.com
WP15PE WP15PE
High-Performance Solid Carbide End Mills • VariMill™
Series 771E 772E • VariMill III™ ER • Victory™ Grades
End Mill Tolerances
D1 tolerance e8 D
tolerance h6
+ / -
) 3 -0,014/-0,028 ) 3 0/-0,006
> 3–6 -0,020/-0,038 > 3–6 0/-0,008
> 6–10 -0,025/-0,047 > 6–10 0/-0,009
> 10–18 -0,032/-0,059 > 10–18 0/-0,011
> 18–30 -0,040/-0,073 > 18–30 0/-0,013
Series 771E 772E • VariMill III ER • Victory Grades
WS15PE
AlTiN
order # catalogue #
WS15PE
AlTiN
order # catalogue # D1 D
length of cut
Ap1 max
length
LR¡BCH
5978092 771E10004T — 10,0 10 30,00 76 — 0,50
5978093 771E10024T — 10,0 10 30,00 76 0,50 —
5978094 772E10004T — 10,0 10 50,00 100 — 0,50
5978095 772E10024T — 10,0 10 50,00 100 0,50 —
5978098 771E12005T — 12,0 12 36,00 100 — 0,50
5978099 771E12025T — 12,0 12 36,00 100 0,50 —
5978100 772E12005T 5978102 772E12005V 12,0 12 60,00 125 — 0,50
5978101 772E12025T 5978103 772E12025V 12,0 12 60,00 125 0,50 —
5978106 771E16006T — 16,0 16 48,00 110 — 0,50
5978107 771E16026T — 16,0 16 48,00 110 0,50 —
5978108 772E16006T 5978110 772E16006V 16,0 16 80,00 141 — 0,50
5978109 772E16026T 5978111 772E16026V 16,0 16 80,00 141 0,50 —
5978114 771E20007T — 20,0 20 60,00 125 — 0,50
5978115 771E20027T — 20,0 20 60,00 125 0,50 —
5978116 772E20007T 5978118 772E20007V 20,0 20 100,00 166 — 0,50
5978117 772E20027T 5978119 772E20027V 20,0 20 100,00 166 0,50 —
High-Performance Solid Carbide End Mills
Detail X
rst choice
alternate choice
• Unequal ute spacing .
• Centre cutting.
• Ramping angle 3°.
• Optimised for difcult-to-machine
workpiece materials.
• Semi-nishing to nishing applications.
• High-speed machining capability.
• Standard items listed. Additional styles
and coatings made-to-order.
WID_Master16_SolidEndMilling_HighPerformance_O044_O045_Metric_REBRAND.indd 45 10/30/15 2:21 PM
O46
LViWID M 16 S lidE dMilli Hi hP f O046 O047 M i REBRANDO b 20 20153 55PM
widia.com
High-Performance Solid Carbide End Mills • VariMill™
Application Data • Series 77NE • VariMill III™ ER • Victory™ Grades
High-Performance Solid Carbide End Mills
Series 77NE • VariMill III ER • With Neck • Semi-Finishing • Victory Grades
Series 77NE • VariMill III ER • With Neck • Finishing • Victory Grades
Material
Group
Side Milling (A) WS15PE Recommended feed per tooth (fz = mm/th) for side milling (A).
ACutting Speed — vc
m/min D1 — Diameter
ap ae min max mm 10,0 12,0 16,0 18,0 20,0
P4Ap1 max 0,06 x D 180 – 300 fz 0,065 0,075 0,092 0,099 0,106
5Ap1 max 0,06 x D 120 – 200 fz 0,058 0,067 0,084 0,091 0,097
M
1Ap1 max 0,06 x D 180 – 230 fz 0,073 0,084 0,105 0,113 0,121
2Ap1 max 0,06 x D 120 – 160 fz 0,058 0,067 0,084 0,091 0,097
3Ap1 max 0,06 x D 120 – 140 fz 0,048 0,056 0,068 0,073 0,078
S
1Ap1 max 0,06 x D 100 – 180 fz 0,073 0,084 0,105 0,113 0,121
2Ap1 max 0,06 x D 50 – 80 fz 0,038 0,045 0,056 0,060 0,065
3Ap1 max 0,06 x D 120 – 160 fz 0,058 0,067 0,084 0,091 0,097
4Ap1 max 0,06 x D 100 – 120 fz 0,053 0,062 0,077 0,083 0,089
H1Ap1 max 0,06 x D 160 – 280 fz 0,065 0,075 0,092 0,099 0,106
2Ap1 max 0,06 x D 140 – 240 fz 0,048 0,056 0,068 0,073 0,078
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group.
Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on >12mm diameters.
Material
Group
Side Milling (A) WS15PE Recommended feed per tooth (fz = mm/th) for side milling (A).
ACutting Speed — vc
m/min D1 — Diameter
ap ae min max mm 10,0 12,0 16,0 18,0 20,0
P4Ap1 max 0,3 x D 90 – 150 fz 0,054 0,062 0,077 0,083 0,088
5Ap1 max 0,3 x D 60 – 100 fz 0,048 0,056 0,070 0,076 0,081
M
1Ap1 max 0,3 x D 90 – 115 fz 0,061 0,070 0,087 0,095 0,101
2Ap1 max 0,3 x D 60 – 80 fz 0,048 0,056 0,070 0,076 0,081
3Ap1 max 0,3 x D 60 – 70 fz 0,040 0,047 0,057 0,061 0,065
S
1Ap1 max 0,3 x D 50 – 90 fz 0,061 0,070 0,087 0,095 0,101
2Ap1 max 0,3 x D 25 – 40 fz 0,032 0,037 0,046 0,050 0,054
3Ap1 max 0,3 x D 60 – 80 fz 0,048 0,056 0,070 0,076 0,081
4Ap1 max 0,3 x D 50 – 60 fz 0,045 0,052 0,064 0,069 0,074
H1Ap1 max 0,3 x D 80 – 140 fz 0,054 0,062 0,077 0,083 0,088
2Ap1 max 0,3 x D 70 – 120 fz 0,040 0,047 0,057 0,061 0,065
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group.
Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on >12mm diameters.
WID_Master16_SolidEndMilling_HighPerformance_O046_O047_Metric_REBRAND.indd 46 10/30/15 2:21 PM
O47
LViWID M 16 S lidE dMilli Hi hP f O046 O047 M i REBRANDO b 2020153 55PM
widia.com
High-Performance Solid Carbide End Mills • VariMill™
Application Data • Series 771E • VariMill III™ ER • Victory™ Grades
High-Performance Solid Carbide End Mills
Series 771E • VariMill III ER • Semi-Finishing • Victory Grades
Series 771E • VariMill III ER • Finishing • Victory Grades
Material
Group
Side Milling (A) WS15PE Recommended feed per tooth (fz = mm/th) for side milling (A).
ACutting Speed — vc
m/min D1 — Diameter
ap ae min max mm 10,0 12,0 16,0 18,0 20,0
P43 x D 0,06 x D 180 – 300 fz 0,065 0,075 0,092 0,099 0,106
53 x D 0,06 x D 120 – 200 fz 0,058 0,067 0,084 0,091 0,097
M
13 x D 0,06 x D 180 – 230 fz 0,073 0,084 0,105 0,113 0,121
23 x D 0,06 x D 120 – 160 fz 0,058 0,067 0,084 0,091 0,097
33 x D 0,06 x D 120 – 140 fz 0,048 0,056 0,068 0,073 0,078
S
13 x D 0,06 x D 100 – 180 fz 0,073 0,084 0,105 0,113 0,121
23 x D 0,06 x D 50 – 80 fz 0,038 0,045 0,056 0,060 0,065
33 x D 0,06 x D 120 – 160 fz 0,058 0,067 0,084 0,091 0,097
43 x D 0,06 x D 100 – 120 fz 0,053 0,062 0,077 0,083 0,089
H13 x D 0,06 x D 160 – 280 fz 0,065 0,075 0,092 0,099 0,106
23 x D 0,06 x D 140 – 240 fz 0,048 0,056 0,068 0,073 0,078
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group.
Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on >12mm diameters.
Material
Group
Side Milling (A) WS15PE Recommended feed per tooth (fz = mm/th) for side milling (A).
ACutting Speed — vc
m/min D1 — Diameter
ap ae min max mm 10,0 12,0 16,0 18,0 20,0
P43 x D 0,2 x D 90 – 150 fz 0,054 0,062 0,077 0,083 0,088
53 x D 0,2 x D 60 – 100 fz 0,048 0,056 0,070 0,076 0,081
M
13 x D 0,2 x D 90 – 115 fz 0,061 0,070 0,087 0,095 0,101
23 x D 0,2 x D 60 – 80 fz 0,048 0,056 0,070 0,076 0,081
33 x D 0,2 x D 60 – 70 fz 0,040 0,047 0,057 0,061 0,065
S
13 x D 0,2 x D 50 – 90 fz 0,061 0,070 0,087 0,095 0,101
23 x D 0,2 x D 25 – 40 fz 0,032 0,037 0,046 0,050 0,054
33 x D 0,2 x D 60 – 80 fz 0,048 0,056 0,070 0,076 0,081
43 x D 0,2 x D 50 – 60 fz 0,045 0,052 0,064 0,069 0,074
H13 x D 0,2 x D 80 – 140 fz 0,054 0,062 0,077 0,083 0,088
23 x D 0,2 x D 70 – 120 fz 0,040 0,047 0,057 0,061 0,065
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group.
Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on >12mm diameters.
WID_Master16_SolidEndMilling_HighPerformance_O046_O047_Metric_REBRAND.indd 47 10/30/15 2:21 PM
LViWID M 16 S lidE dMilli Hi hP f O048 O049 M i REBRANDN b 10 20153 42PM
O48
LViWID M 16 S lidE dMilli Hi hP f O048 O049 M i REBRANDN b 10 20153 42PM
widia.com
High-Performance Solid Carbide End Mills • VariMill™
Application Data • Series 772E • VariMill III™ ER • Victory™ Grades
High-Performance Solid Carbide End Mills
Series 772E • VariMill III ER • Finishing • Victory Grades
Material
Group
Side Milling (A) WS15PE Recommended feed per tooth (fz = mm/th) for side milling (A).
ACutting Speed — vc
m/min D1 — Diameter
ap ae min max mm 10,0 12,0 16,0 18,0 20,0
P
05 x D 0,05 x D 300 – 400 fz 0,086 0,099 0,121 0,130 0,137
15 x D 0,05 x D 300 – 400 fz 0,086 0,099 0,121 0,130 0,137
25 x D 0,05 x D 280 – 380 fz 0,086 0,099 0,121 0,130 0,137
35 x D 0,05 x D 240 – 320 fz 0,073 0,084 0,105 0,113 0,121
45 x D 0,05 x D 180 – 300 fz 0,065 0,075 0,092 0,099 0,106
55 x D 0,05 x D 120 – 200 fz 0,058 0,067 0,084 0,091 0,097
65 x D 0,05 x D 100 – 150 fz 0,048 0,056 0,068 0,073 0,078
M
15 x D 0,05 x D 180 – 230 fz 0,073 0,084 0,105 0,113 0,121
25 x D 0,05 x D 120 – 160 fz 0,058 0,067 0,084 0,091 0,097
35 x D 0,05 x D 120 – 140 fz 0,048 0,056 0,068 0,073 0,078
K
15 x D 0,05 x D 240 – 300 fz 0,086 0,099 0,121 0,130 0,137
25 x D 0,05 x D 220 – 280 fz 0,073 0,084 0,105 0,113 0,121
35 x D 0,05 x D 220 – 260 fz 0,058 0,067 0,084 0,091 0,097
S
15 x D 0,05 x D 100 – 180 fz 0,073 0,084 0,105 0,113 0,121
25 x D 0,05 x D 50 – 80 fz 0,038 0,045 0,056 0,060 0,065
35 x D 0,05 x D 120 – 160 fz 0,058 0,067 0,084 0,091 0,097
45 x D 0,05 x D 100 – 120 fz 0,053 0,062 0,077 0,083 0,089
H15 x D 0,05 x D 160 – 280 fz 0,065 0,075 0,092 0,099 0,106
25x D 0,06 x D 140 – 240 fz 0,048 0,056 0,068 0,073 0,078
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for fi nishing applications or for lower hardness (machinability) within group.
Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on >12mm diameters.
WID_Master16_SolidEndMilling_HighPerformance_O048_O049_Metric_REBRAND.indd 48 11/11/15 9:37 AM
• Minimises runout to dramatically boost performance.
• Creates an upsurge in tool life.
• Eliminates pullout with SAFE-hOCK® by HAIMER option.
• Chatter-free refi ned balancing to G2.5@25,000 RPM.
• Extreme versatility for use with most rotating applications.
To learn more about our innovations, contact your local
Authorised Distributor or visit widia.com.
Precision Collet Chuck
Putting your
round tools in
a position
to succeed
WID_Master16_SolidEndMilling_HighPerformance_O048_O049_Metric_REBRAND.indd 49 11/11/15 9:37 AM
O50
LViWID M 16 S lidE dMilli Hi hP f O050 O051 M i REBRANDN b 20 20153 04PM
widia.com
Designed Profi les
Maximum Metal Removal
Rates (MRR) with low power
consumption.
Unique Geometries
Heavier and deeper cuts.
Available with Victory™
grade technology.
Centre Cutting
Ramping and plunging
capabilities.
Special proprietary carbide substrates and state-of-the-art surface technology, combined with
unique geometries, provides end users with the capability to signifi cantly reduce machining time
with heavier and deeper cuts, fewer passes, and faster surface speed. WIDIA™ geometries are
uniquely formed and fi ne-tuned to optimise chip form, size, and evacuation generated by a given
workpiece material.
• For all ferrous workpiece materials.
• Low power consumption at high speeds with long tool life.
• Provides maximum metal removal rates in both slotting and profi ling operations.
• Alternative solution for productivity gains on light machines.
HP ROUGHER
High-Performance Solid Carbide •
Roughers
WID_Master16_SolidEndMilling_HighPerformance_O050_O051_Metric_REBRAND.indd 50 11/20/15 3:04 PM
O51
LViWID M 16 S lidE dMilli Hi hP f O050 O051 M i REBRANDN b 202015304PM
widia.com
High-Performance Solid Carbide Roughers
• Reduce machine time with heavier, deeper cuts requiring fewer passes.
• Lower power consumption at higher speeds providing productivity even when
horsepower may be limited.
• Maximum Metal Removal Rates (MRR) in both slotting and profi ling.
• Uniquely designed profi les to optimise chip form in given workpiece materials.
DQ13 Series 422824 422820 Series
• Centre Cutting.
• 3-fl ute.
• 35°helix.
• Chipbreaker pitch.
• Victory™ grade.
• DIN 6527.
• Centre cutting.
• 4-fl ute.
• 30° helix.
• Flat shallow pitch.
49H6 Series 4U40 Series
• Centre cutting.
• 20° helix.
• Fine pitch.
• Through coolant.
• Centre cutting.
• 4- and 6-fl utes.
• 45° helix.
• Unequal fl ute spacing.
• Flat shallow pitch.
• Victory™ grade.
422152 422150 Series 4U70 Series
• Centre cutting.
• 4-fl ute.
• 25° helix.
• Cord profi le.
• Steels and cast irons.
• DIN 6527.
• Centre cutting.
• 4- and 6-fl utes.
• 45° helix.
• Unequal fl ute spacing.
• Flat and shallow pitch.
• Victory™ grade.
4976 Series 49N6 Series
• Centre cutting.
• 3-, 4-, and 5-fl utes.
• 30° helix.
• Unequal fl ute spacing.
• Flat shallow pitch.
• Victory™ grade.
• Centre cutting.
• 3- and 4-fl utes.
• 30° helix.
• With neck.
• Flat and shallow pitch.
(continued)
WID_Master16_SolidEndMilling_HighPerformance_O050_O051_Metric_REBRAND.indd 51 11/20/15 3:04 PM
O52
LViWID M 16 S lidE dMilli Hi hP f O052 O053 M i REBRANDN b 12 20159 01AM
widia.com
High-Performance Solid Carbide Roughers
4969 Series 422846 022846 Series
• Centre cutting.
• 3- and 4-fl utes.
• 45° helix.
• Flat shallow pitch.
• Ball nose.
• Centre cutting.
• 4- and 6-fl utes.
• 45° helix.
• Flat shallow pitch.
• Steels and cast irons.
• DIN 6527.
422813 022813 Series 4906 Series
• Centre cutting.
• 3-fl ute.
• 30° helix.
• Flat shallow pitch.
• DIN 6527.
• Centre cutting.
• 4-, 5-, and 6-fl utes.
• 20° helix.
• Fine pitch.
• Universal applications.
422818 022818 Series 4966 Series
• Centre cutting.
• 4-fl ute.
• 30° helix.
• Flat shallow pitch.
• Steels and cast irons.
• DIN 6527.
• Centre cutting.
• 3- and 4-fl utes.
• 20° helix.
• Fine pitch.
• Ball nose.
• Universal applications.
(continued)
WID_Master16_SolidEndMilling_HighPerformance_O052_O053_Metric_REBRAND.indd 52 11/12/15 9:55 AM
O53
LViWID M 16 S lidE dMilli Hi hP f O052 O053 M i REBRANDN b 122015901AM
widia.com
Coarse profile
For slotting, pocketing, and heavy prole cuts in ferrous materials.
Fine profile
For prole cuts and shallow slots (less than .50) in ferrous materials.
Extra-Fine profile
For proling cuts in medium to hard steels.
Chamfered profile
For machining non-ferrous materials.
Flat shallow profile
For machining alloyed steels, stainless steels, high-temp alloys, titanium, and hard materials.
Chipbreaker profile
For roughing and semi-nishing.
Straight cutting edge
Ra = 0,5–0,8
Rz = 4–6
Cord prole
Ra = 12–14
Rz = 90–110
Flat prole
Ra = 2,5–3,5
Rz = 20–25
Roughing prole
Ra = 2,5–3,5
Rz = 20–25
Finishing End Mill
Power Consumption
Fine-Profile Rougher
Semi-Finishing
End Mill
Coarse Profile
Rougher
Rougher Profiles
WID_Master16_SolidEndMilling_HighPerformance_O052_O053_Metric_REBRAND.indd 53 11/12/15 9:55 AM
O54
LViWID M 16 S lidE dMilli Hi hP f O054 O055 M i REBRANDO b 20 20153 54PM
widia.com
WP15PE WP15PE
High-Performance Solid Carbide End Mills • Roughing
Series DQ13 • Victory™ Grades
End Mill Tolerances
D1
tolerance h11
+ / - D
tolerance h6
+ / -
) 3 0/-0,060 ) 3 0/-0,006
> 3–6 0/-0,075 > 3–6 0/-0,008
> 6–10 0/-0,09 > 6–10 0/-0,009
> 10–18 0/-0,11 > 10–18 0/-0,011
> 18–30 0/-0,13 > 18–30 0/-0,013
Series DQ13 • Victory Grades
grade WP15PE
AlTiN
order # catalogue #
grade WP15PE
AlTiN
order # catalogue # D1 D
length of cut
Ap1 max
length
LR¡
5560534 DQ1303002T 5560536 DQ1303002W 3,0 6 7,00 54 0,25
5560535 DQ1304002T 5560537 DQ1304002W 4,0 6 8,00 57 0,25
– 5560538 DQ1305002W 5,0 6 10,00 57 0,25
– 5560539 DQ1306002W 6,0 6 10,00 57 0,45
– 5560700 DQ1307003W 7,0 8 13,00 63 0,45
– 5560701 DQ1308003W 8,0 8 16,00 63 0,45
– 5560702 DQ1310004W 10,0 10 19,00 72 0,45
– 5560703 DQ1312005W 12,0 12 22,00 83 0,45
– 5560704 DQ1314014W 14,0 14 22,00 83 0,45
– 5560705 DQ1316006W 16,0 16 32,00 92 0,45
– 5560706 DQ1318018W 18,0 18 32,00 92 0,45
– 5560707 DQ1320007W 20,0 20 38,00 104 0,45
High-Performance Solid Carbide End Mills
• Centre cutting.
• Chipbreaker pitch.
• Standard items listed. Additional
styles and coatings made-to-order.
rst choice
alternate choice
WID_Master16_SolidEndMilling_HighPerformance_O054_O055_Metric_REBRAND.indd 54 10/30/15 2:21 PM
O55
LViWID M 16 S lidE dMilli Hi hP f O054 O055 M i REBRANDO b 2020153 54PM
widia.com
TiAlN-LW TiAlN-RW
High-Performance Solid Carbide End Mills • Roughing
Series 49H6
Series 49H6
grade TiAlN-LW
TiAlN
order # catalogue #
grade TiAlN-RW
TiAlN
order # catalogue # D1 D
length of cut
Ap1 max
length
L BCH ZU
1657259 49H608003LW 1657260 49H608003RW 8,0 8 16,00 63 0,30 3
1657263 49H610004LW 1657264 49H610004RW 10,0 10 22,00 72 0,50 4
— 1657268 49H612005RW 12,0 12 26,00 83 0,50 4
1968206 49H614014LW — 14,0 14 26,00 83 0,50 4
1657273 49H616006LW 1657274 49H616006RW 16,0 16 32,00 92 0,50 4
1657277 49H618018LW 1657278 49H618018RW 18,0 18 32,00 92 0,50 4
1657281 49H620007LW 1657282 49H620007RW 20,0 20 38,00 104 0,50 4
• Centre cutting.
• Fine pitch.
• TiAlN-LW = Multilayer.
• TiAlN-RW = Monolayer.
• Standard items listed. Additional
styles and coatings made-to-order.
rst choice
alternate choice
End Mill Tolerances
D1
tolerance h11
+ / - D
tolerance h6
+ / -
) 3 0/-0,060 ) 3 0/-0,006
> 3–6 0/-0,075 > 3–6 0/-0,008
> 6–10 0/-0,09 > 6–10 0/-0,009
> 10–18 0/-0,11 > 10–18 0/-0,011
> 18–30 0/-0,13 > 18–30 0/-0,013
High-Performance Solid Carbide End Mills
WID_Master16_SolidEndMilling_HighPerformance_O054_O055_Metric_REBRAND.indd 55 10/30/15 2:21 PM
O56
LViWID M 16 S lidE dMilli Hi hP f O056 O057 M i REBRANDO b 20 20153 53PM
widia.com
K30F-DCHP K30F-DCHP
High-Performance Solid Carbide End Mills • Roughing
Series 422150 422152
Series 422150 422152
grade K30F-DCHP
TiAlN
order # catalogue #
grade K30F-DCHP
TiAlN
order # catalogue # D1 D
length of cut
Ap1 max
length
L BCH
2630665 422150-000060 2630679 422152-000060 6,0 6 13,00 57 0,10
2630667 422150-000080 2630680 422152-000080 8,0 8 19,00 63 0,20
2630669 422150-000100 2630713 422152-000100 10,0 10 22,00 72 0,30
2630670 422150-000120 2630714 422152-000120 12,0 12 26,00 83 0,30
2630672 422150-000160 2630717 422152-000160 16,0 16 32,00 92 0,40
2630675 422150-000200 2630718 422152-000200 20,0 20 38,00 104 0,40
2630677 422150-000250 2630719 422152-000250 25,0 25 45,00 121 0,40
• Centre cutting.
• Cord prole.
• Standard items listed. Additional
styles and coatings made-to-order.
rst choice
alternate choice
End Mill Tolerances
D1
tolerance h10
+ / - D
tolerance h6
+ / -
) 3 0/-0,040 ) 3 0/-0,006
> 3–6 0/-0,048 > 3–6 0/-0,008
> 6–10 0/-0,058 > 6–10 0/-0,009
> 10–18 0/-0,070 > 10–18 0/-0,011
> 18–30 0/-0,084 > 18–30 0/-0,013
High-Performance Solid Carbide End Mills
Detail X
WID_Master16_SolidEndMilling_HighPerformance_O056_O057_Metric_REBRAND.indd 56 10/30/15 2:22 PM
O57
LViWID M 16 S lidE dMilli Hi hP f O056 O057 M i REBRANDO b 2020153 53PM
widia.com
WP15PE
High-Performance Solid Carbide End Mills • Roughing
Series 4976 • Victory™ Grades
Series 4976 • Victory Grades
grade WP15PE
AlTiN
order # catalogue # D1 D
length of cut
Ap1 max
length
L BCH ZU
5560708 497604002T 4,0 6 8,00 57 0,30 3
5560709 497605002T 5,0 6 13,00 57 0,30 3
5560710 497606002T 6,0 6 13,00 57 0,30 3
5560711 497608003T 8,0 8 16,00 63 0,30 3
5560712 497610004T 10,0 10 22,00 72 0,50 4
5560713 497612005T 12,0 12 26,00 83 0,50 4
5560714 497614014T 14,0 14 26,00 83 0,50 4
5560715 497616006T 16,0 16 32,00 92 0,50 4
5560716 497618018T 18,0 18 32,00 92 0,50 4
5560717 497620007T 20,0 20 38,00 104 0,50 4
5560718 497625008T 25,0 25 45,00 121 0,50 5
• Centre cutting.
• Flat shallow pitch.
• Standard items listed. Additional
styles and coatings made-to-order.
rst choice
alternate choice
End Mill Tolerances
D1 tolerance d11 D
tolerance h6
+ / -
) 3 -0,020/-0,080 ) 3 0/-0,006
> 3–6 -0,030/-0,105 > 3–6 0/-0,008
> 6–10 -0,040/-0,130 > 6–10 0/-0,009
> 10–18 -0,050/-0,160 > 10–18 0/-0,011
> 18–30 -0,065/-0,195 > 18–30 0/-0,013
High-Performance Solid Carbide End Mills
Detail X
WID_Master16_SolidEndMilling_HighPerformance_O056_O057_Metric_REBRAND.indd 57 10/30/15 2:22 PM
O58
LViWID M 16 S lidE dMilli Hi hP f O058 O059 M i REBRANDO b 20 20153 53PM
widia.com
K30F-DCHP K30F-DCHP
High-Performance Solid Carbide End Mills • Roughing
Series 422820 422824
Series 422820 422824
grade K30F-DCHP
TiAlN
order # catalogue #
grade K30F-DCHP
TiAlN
order # catalogue # D1 D
length of cut
Ap1 max
length
L BCH
2628396 422820-000060 2628451 422824-000060 6,0 6 18,00 62 0,10
2628397 422820-000080 2628473 422824-000080 8,0 8 24,00 68 0,20
2628400 422820-000100 2628475 422824-000100 10,0 10 30,00 80 0,30
2628401 422820-000120 2628477 422824-000120 12,0 12 36,00 93 0,30
2628446 422820-000160 2628478 422824-000160 16,0 16 48,00 108 0,40
2628447 422820-000200 2628481 422824-000200 20,0 20 60,00 126 0,40
2628448 422820-000250 2628482 422824-000250 25,0 25 75,00 150 0,40
• Centre cutting.
• Flat shallow pitch.
• Standard items listed. Additional
styles and coatings made-to-order.
rst choice
alternate choice
End Mill Tolerances
D1
tolerance h10
+ / - D
tolerance h6
+ / -
) 3 0/-0,040 ) 3 0/-0,006
> 3–6 0/-0,048 > 3–6 0/-0,008
> 6–10 0/-0,058 > 6–10 0/-0,009
> 10–18 0/-0,070 > 10–18 0/-0,011
> 18–30 0/-0,084 > 18–30 0/-0,013
High-Performance Solid Carbide End Mills
Detail X
WID_Master16_SolidEndMilling_HighPerformance_O058_O059_Metric_REBRAND.indd 58 10/30/15 2:22 PM
O59
LViWID M 16 S lidE dMilli Hi hP f O058 O059 M i REBRANDO b 2020153 53PM
widia.com
WP15PE
High-Performance Solid Carbide End Mills • Roughing
Series 4U40 • Victory™ Grades
Series 4U40 • Victory Grades
grade WP15PE
AlTiN
order # catalogue # D1 D
length of cut
Ap1 max
length
LR¡ZU
5583159 4U4006002T 6,0 6 6,00 57 0,75 4
5583420 4U4008003T 8,0 8 8,00 63 0,75 4
5583421 4U4010004T 10,0 10 10,00 72 0,75 4
5583422 4U4012005T 12,0 12 12,00 83 1,00 4
5583423 4U4016006T 16,0 16 16,00 92 1,00 6
5583424 4U4020007T 20,0 20 20,00 104 1,25 6
5583425 4U4025008T 25,0 25 25,00 121 1,25 6
• Centre cutting.
• Flat shallow pitch.
• Unequal ute spacing.
• Standard items listed. Additional
styles and coatings made-to-order.
rst choice
alternate choice
End Mill Tolerances
D1 tolerance d11 D
tolerance h6
+ / -
) 3 -0,020/-0,080 ) 3 0/-0,006
> 3–6 -0,030/-0,105 > 3–6 0/-0,008
> 6–10 -0,040/-0,130 > 6–10 0/-0,009
> 10–18 -0,050/-0,160 > 10–18 0/-0,011
> 18–30 -0,065/-0,195 > 18–30 0/-0,013
High-Performance Solid Carbide End Mills
WID_Master16_SolidEndMilling_HighPerformance_O058_O059_Metric_REBRAND.indd 59 10/30/15 2:22 PM
O60
LViWID M 16 S lidE dMilli Hi hP f O060 O061 M i REBRANDO b 20 20153 53PM
widia.com
WP15PE WP15PE
High-Performance Solid Carbide End Mills • Roughing
Series 4U70 • Victory™ Grades
End Mill Tolerances
D1 tolerance d11 D
tolerance h6
+ / -
) 3 -0,020/-0,080 ) 3 0/-0,006
> 3–6 -0,030/-0,105 > 3–6 0/-0,008
> 6–10 -0,040/-0,130 > 6–10 0/-0,009
> 10–18 -0,050/-0,160 > 10–18 0/-0,011
> 18–30 -0,065/-0,195 > 18–30 0/-0,013
Series 4U70 • Victory Grades
grade WP15PE
AlTiN
order # catalogue #
grade WP15PE
AlTiN
order # catalogue # D1 D
length of cut
Ap1 max
length
L BCH ZU
5583426 4U7006002T 5583436 4U7006002W 6,0 6 13,00 57 0,30 4
5583427 4U7008003T 5583437 4U7008003W 8,0 8 16,00 63 0,40 4
5583428 4U7010004T 5583438 4U7010004W 10,0 10 22,00 72 0,50 4
5583429 4U7012005T 5583439 4U7012005W 12,0 12 26,00 83 0,50 4
5583430 4U7016006T 5583440 4U7016006W 16,0 16 32,00 92 0,60 6
5583431 4U7016046T — 16,0 16 32,00 92 0,60 4
5583432 4U7020007T 5583441 4U7020007W 20,0 20 38,00 104 1,00 6
5583433 4U7020047T — 20,0 20 38,00 104 1,00 4
5583434 4U7025008T 5583442 4U7025008W 25,0 25 45,00 121 1,12 6
5583435 4U7025048T — 25,0 25 45,00 121 1,12 4
High-Performance Solid Carbide End Mills
• Centre cutting.
• Flat shallow pitch.
• Unequal ute spacing.
• Standard items listed. Additional
styles and coatings made-to-order.
rst choice
alternate choice
Detail X
WID_Master16_SolidEndMilling_HighPerformance_O060_O061_Metric_REBRAND.indd 60 10/30/15 2:22 PM
O61
LViWID M 16 S lidE dMilli Hi hP f O060 O061 M i REBRANDO b 2020153 53PM
widia.com
AlTiN-MW
High-Performance Solid Carbide End Mills • Roughing
Series 49N6 • With Neck
Series 49N6 • With Neck
grade AlTiN-MW
AlTiN
order # catalogue # D1 D D3
length of cut
Ap1 max L3
length
L BCH ZU
3474583 49N604002MW 4,0 6 — 8,00 8,00 57 0,30 3
3474584 49N605002MW 5,0 6 — 13,00 13,00 57 0,30 3
3474585 49N606002MW 6,0 6 6 13,00 21,00 57 0,30 3
3474587 49N608003MW 8,0 8 8 16,00 27,00 63 0,30 3
3474589 49N610004MW 10,0 10 10 22,00 32,00 72 0,50 4
3474591 49N612005MW 12,0 12 11 26,00 38,00 83 0,50 4
3474593 49N614014MW 14,0 14 13 26,00 38,00 83 0,50 4
3474594 49N616006MW 16,0 16 15 32,00 44,00 92 0,50 4
3474595 49N618018MW 18,0 18 17 32,00 44,00 92 0,50 4
3474596 49N620007MW 20,0 20 19 38,00 54,00 104 0,50 4
3474597 49N625008MW 25,0 25 24 45,00 65,00 121 0,50 5
• Centre cutting.
• Flat shallow prole.
• Standard items listed. Additional
styles and coatings made-to-order.
rst choice
alternate choice
End Mill Tolerances
D1 tolerance d11 D
tolerance h6
+ / -
) 3 -0,020/-0,080 ) 3 0/-0,006
> 3–6 -0,030/-0,105 > 3–6 0/-0,008
> 6–10 -0,040/-0,130 > 6–10 0/-0,009
> 10–18 -0,050/-0,160 > 10–18 0/-0,011
> 18–30 -0,065/-0,195 > 18–30 0/-0,013
High-Performance Solid Carbide End Mills
Detail X
WID_Master16_SolidEndMilling_HighPerformance_O060_O061_Metric_REBRAND.indd 61 10/30/15 2:22 PM
O62
LViWID M 16 S lidE dMilli Hi hP f O062 O063 M i REBRANDO b 20 20153 53PM
widia.com
TiAlN-LW
High-Performance Solid Carbide End Mills • Roughing
Series 4969
End Mill Tolerances
D1 tolerance d11 D
tolerance h6
+ / -
) 3 -0,020/-0,080 ) 3 0/-0,006
> 3–6 -0,030/-0,105 > 3–6 0/-0,008
> 6–10 -0,040/-0,130 > 6–10 0/-0,009
> 10–18 -0,050/-0,160 > 10–18 0/-0,011
> 18–30 -0,065/-0,195 > 18–30 0/-0,013
Series 4969
grade TiAlN-LW
TiAlN
order # catalogue # D1 D
length of cut
Ap1 max
length
LZU
3881115 496905002LW 5,0 6 13,00 57 3
3881116 496906002LW 6,0 6 13,00 57 3
3881117 496908003LW 8,0 8 16,00 63 4
3881118 496910004LW 10,0 10 22,00 72 4
3881119 496912005LW 12,0 12 26,00 83 4
3881120 496914014LW 14,0 14 26,00 83 4
3881121 496916006LW 16,0 16 32,00 92 4
3881122 496918018LW 18,0 18 32,00 92 4
3881123 496920007LW 20,0 20 38,00 104 4
High-Performance Solid Carbide End Mills
• Centre cutting.
• Flat shallow prole.
• Standard items listed. Additional
styles and coatings made-to-order.
• Roughing prole also on radii portion
of end mill.
rst choice
alternate choice
WID_Master16_SolidEndMilling_HighPerformance_O062_O063_Metric_REBRAND.indd 62 10/30/15 2:22 PM
O63
LViWID M 16 S lidE dMilli Hi hP f O062 O063 M i REBRANDO b 2020153 53PM
widia.com
K30F K30F-DCF
High-Performance Solid Carbide End Mills • Roughing
Series 022813 422813
Series 022813 422813
grade K30F
uncoated
order # catalogue #
grade K30F-DCF
TiAlN
order # catalogue # D1 D
length of cut
Ap1 max
length
L BCH
2332360 022813-000060 2342043 422813-000060 6,0 6 10,00 57 0,10
2332361 022813-000080 2342045 422813-000080 8,0 8 16,00 63 0,20
2332362 022813-000100 2342047 422813-000100 10,0 10 19,00 72 0,30
2332363 022813-000120 2342049 422813-000120 12,0 12 22,00 83 0,30
2332364 022813-000160 2342051 422813-000160 16,0 16 26,00 92 0,40
2332365 022813-000200 2342053 422813-000200 20,0 20 32,00 104 0,40
2332366 022813-000250 2342055 422813-000250 25,0 25 45,00 121 0,40
• Centre cutting.
• Flat shallow pitch.
• Standard items listed. Additional
styles and coatings made-to-order.
rst choice
alternate choice
End Mill Tolerances
D1
tolerance h10
+ / - D
tolerance h6
+ / -
) 3 0/-0,04 ) 3 0/-0,006
> 3–6 0/-0,048 > 3–6 0/-0,008
> 6–10 0/-0,058 > 6–10 0/-0,009
> 10–18 0/-0,070 > 10–18 0/-0,011
> 18–30 0/-0,084 > 18–30 0/-0,013
High-Performance Solid Carbide End Mills
Detail X
WID_Master16_SolidEndMilling_HighPerformance_O062_O063_Metric_REBRAND.indd 63 10/30/15 2:22 PM
O64
LViWID M 16 S lidE dMilli Hi hP f O064 O065 M i REBRANDO b 20 20153 53PM
widia.com
K30F K30F-DCF
High-Performance Solid Carbide End Mills • Roughing
Series 022818 422818
End Mill Tolerances
D1
tolerance h10
+ / - D
tolerance h6
+ / -
) 3 0/-0,04 ) 3 0/-0,006
> 3–6 0/-0,048 > 3–6 0/-0,008
> 6–10 0/-0,058 > 6–10 0/-0,009
> 10–18 0/-0,070 > 10–18 0/-0,011
> 18–30 0/-0,084 > 18–30 0/-0,013
Series 022818 422818
grade K30F
uncoated
order # catalogue #
grade K30F-DCF
TiAlN
order # catalogue # D1 D
length of cut
Ap1 max
length
L BCH
2332420 022818-000060 2342154 422818-000060 6,0 6 13,00 57 0,10
2332421 022818-000080 2342156 422818-000080 8,0 8 19,00 63 0,20
2332422 022818-000100 2342158 422818-000100 10,0 10 22,00 72 0,30
2332423 022818-000120 2342160 422818-000120 12,0 12 26,00 83 0,30
2332425 022818-000160 2342162 422818-000160 16,0 16 32,00 92 0,40
2332427 022818-000200 2342164 422818-000200 20,0 20 38,00 104 0,40
High-Performance Solid Carbide End Mills
• Centre cutting.
• Flat shallow pitch.
• Standard items listed. Additional
styles and coatings made-to-order.
rst choice
alternate choice
Detail X
WID_Master16_SolidEndMilling_HighPerformance_O064_O065_Metric_REBRAND.indd 64 10/30/15 2:22 PM
O65
LViWID M 16 S lidE dMilli Hi hP f O064 O065 M i REBRANDO b 2020153 53PM
widia.com
K30F K30F-DCF
High-Performance Solid Carbide End Mills • Roughing
Series 022846 422846
Series 022846 422846
grade K30F
uncoated
order # catalogue #
grade K30F-DCF
TiAlN
order # catalogue # D1 D
length of cut
Ap1 max
length
L BCH ZU
2332652 022846-000060 2342676 422846-000060 6,0 6 13,00 57 0,10 4
2332653 022846-000080 2342678 422846-000080 8,0 8 19,00 63 0,20 4
2332654 022846-000100 2342680 422846-000100 10,0 10 22,00 72 0,30 4
2332655 022846-000120 2342684 422846-000120 12,0 12 26,00 83 0,30 4
2332656 022846-000160 2342686 422846-000160 16,0 16 32,00 92 0,40 6
2332657 022846-000200 2342688 422846-000200 20,0 20 38,00 104 0,40 6
2332658 022846-000250 2342690 422846-000250 25,0 25 45,00 121 0,40 6
• Centre cutting.
• Flat shallow pitch.
• Standard items listed. Additional
styles and coatings made-to-order.
rst choice
alternate choice
End Mill Tolerances
D1
tolerance h10
+ / - D
tolerance h6
+ / -
) 3 0/-0,04 ) 3 0/-0,006
> 3–6 0/-0,048 > 3–6 0/-0,008
> 6–10 0/-0,058 > 6–10 0/-0,009
> 10–18 0/-0,070 > 10–18 0/-0,011
> 18–30 0/-0,084 > 18–30 0/-0,013
High-Performance Solid Carbide End Mills
Detail X
WID_Master16_SolidEndMilling_HighPerformance_O064_O065_Metric_REBRAND.indd 65 10/30/15 2:22 PM
O66
LViWID M 16 S lidE dMilli Hi hP f O066 O067 M i REBRANDO b 20 20153 58PM
widia.com
TiAlN-RT TICN-CW TiAlN-LW TiAlN-RW
High-Performance Solid Carbide End Mills • Roughing
Series 4906
End Mill Tolerances
D1 tolerance d11 D
tolerance h6
+ / -
) 3 -0,020/-0,080 ) 3 0/-0,006
> 3–6 -0,030/-0,105 > 3–6 0/-0,008
> 6–10 -0,040/-0,130 > 6–10 0/-0,009
> 10–18 -0,050/-0,160 > 10–18 0/-0,011
> 18–30 -0,065/-0,195 > 18–30 0/-0,013
Series 4906
grade TiAlN-RT
TiAlN
order # catalogue #
grade TiCN-CW
TiCN
order # catalogue #
grade TiAlN-LW
TiAlN
order # catalogue #
grade TiAlN-RW
TiAlN
order # catalogue # D1 D
length of cut
Ap1 max
length
L BCH ZU
1657001 490604002RT 1656997 490604002CW 1657000 490604002LW 1657002 490604002RW 4,0 6 11,00 55 0,30 3
1657009 490605002RT 1657007 490605002CW 1657008 490605002LW 1657010 490605002RW 5,0 6 13,00 57 0,30 3
1657018 490606002RT 1657016 490606002CW 1657017 490606002LW 1657019 490606002RW 6,0 6 13,00 57 0,30 3
3133084 490607003RT 1657023 490607003CW 1657024 490607003LW 1657025 490607003RW 7,0 8 16,00 63 0,30 3
1657033 490608003RT 1657031 490608003CW 1657032 490608003LW 1657034 490608003RW 8,0 8 16,00 63 0,30 3
3133085 490609004RT 1657039 490609004CW 1657040 490609004LW 1657041 490609004RW 9,0 10 19,00 72 0,50 4
1657050 490610004RT 1657048 490610004CW 1657049 490610004LW 1657051 490610004RW 10,0 10 22,00 72 0,50 4
3133086 490611005RT 1657055 490611005CW 1968092 490611005LW 1657056 490611005RW 11,0 12 26,00 83 0,50 4
1657063 490612005RT 1657061 490612005CW 1657062 490612005LW 1657064 490612005RW 12,0 12 26,00 83 0,50 4
3133087 490613014RT 1657068 490613014CW 1968204 490613014LW 1657069 490613014RW 13,0 14 26,00 83 0,50 4
1657084 490614014RT 1570244 490614014CW 1657083 490614014LW 1657085 490614014RW 14,0 14 26,00 83 0,50 4
1657096 490616006RT 1657094 490616006CW 1657095 490616006LW 1657097 490616006RW 16,0 16 32,00 92 0,50 4
1657104 490618018RT 1657102 490618018CW 1657103 490618018LW 1657105 490618018RW 18,0 18 32,00 92 0,50 4
1657112 490620007RT 1657110 490620007CW 1657111 490620007LW 1657113 490620007RW 20,0 20 38,00 104 0,50 4
1657120 490625008RT 1657118 490625008CW 1657119 490625008LW 1657121 490625008RW 25,0 25 45,00 121 0,50 5
High-Performance Solid Carbide End Mills
• Centre cutting.
• Fine pitch.
• LW = Multilayer.
• RW = Monolayer.
• Standard items listed. Additional
styles and coatings made-to-order.
rst choice
alternate choice
Detail X
WID_Master16_SolidEndMilling_HighPerformance_O066_O067_Metric_REBRAND.indd 66 10/30/15 2:22 PM
O67
LViWID M 16 S lidE dMilli Hi hP f O066 O067 M i REBRANDO b 2020153 58PM
widia.com
TICN-CW TiAlN-LW TiAlN-RW
High-Performance Solid Carbide End Mills • Roughing
Series 4966
Series 4966
grade TiCN-CW
TiCN
order # catalogue #
grade TiAlN-LW
TiAlN
order # catalogue #
grade TiAlN-RW
TiAlN
order # catalogue # D1 D
length of cut
Ap1 max
length
LZU
1657191 496605002CW 1657192 496605002LW 1657193 496605002RW 5,0 6 13,00 57 3
1657196 496606002CW 1657197 496606002LW 1657198 496606002RW 6,0 6 13,00 57 3
1657201 496608003CW 1657202 496608003LW 1657203 496608003RW 8,0 8 16,00 63 3
1657206 496610004CW 1657207 496610004LW 1657208 496610004RW 10,0 10 22,00 72 4
1657211 496612005CW 1657212 496612005LW 1657213 496612005RW 12,0 12 26,00 83 4
— 1657217 496614014LW 1657218 496614014RW 14,0 14 26,00 83 4
1657221 496616006CW 1657222 496616006LW 1657223 496616006RW 16,0 16 32,00 92 4
1657227 496618018CW — — 18,0 18 32,00 92 4
1657232 496620007CW — 1657234 496620007RW 20,0 20 38,00 104 4
1657237 496625008CW — 1657239 496625008RW 25,0 25 45,00 121 4
• Centre cutting.
• Fine pitch.
• LW = Multilayer.
• RW = Monolayer.
• Standard items listed. Additional
styles and coatings made-to-order.
rst choice
alternate choice
End Mill Tolerances
D1 tolerance d11 D
tolerance h6
+ / -
) 3 -0,020/-0,080 ) 3 0/-0,006
> 3–6 -0,030/-0,105 > 3–6 0/-0,008
> 6–10 -0,040/-0,130 > 6–10 0/-0,009
> 10–18 -0,050/-0,160 > 10–18 0/-0,011
> 18–30 -0,065/-0,195 > 18–30 0/-0,013
High-Performance Solid Carbide End Mills
WID_Master16_SolidEndMilling_HighPerformance_O066_O067_Metric_REBRAND.indd 67 10/30/15 2:22 PM
O68
LViWID M 16 S lidE dMilli Hi hP f O068 O069 M i REBRANDO b 20 20153 58PM
widia.com
High-Performance Solid Carbide End Mills • Roughing
Application Data • Series DQ13 • Victory™ Grades
High-Performance Solid Carbide End Mills
Series DQ13 • Victory Grades
Material
Group
Side Milling (A)
and Slotting (B) WP15PE Recommended feed per tooth (fz = mm/th) for side milling (A).
For slotting (B), reduce fz by 20%.
AB
Cutting Speed
— vc
m/min
D1 — Diameter
ap ae ap min max mm 3,0 4,0 5,0 6,0 7,0 8,0 10,0 12,0 14,0 16,0 18,0 20,0
P
01 x D 0,5 x D 0,75 x D 150 – 200 fz 0,021 0,028 0,036 0,044 0,052 0,060 0,072 0,083 0,092 0,101 0,108 0,114
11 x D 0,5 x D 0,75 x D 150 – 200 fz 0,021 0,028 0,036 0,044 0,052 0,060 0,072 0,083 0,092 0,101 0,108 0,114
21 x D 0,5 x D 0,75 x D 140 – 190 fz 0,021 0,028 0,036 0,044 0,052 0,060 0,072 0,083 0,092 0,101 0,108 0,114
31 x D 0,5 x D 0,75 x D 120 – 160 fz 0,017 0,023 0,030 0,036 0,043 0,050 0,061 0,070 0,079 0,087 0,095 0,101
41 x D 0,5 x D 0,5 x D 90 – 150 fz 0,016 0,021 0,027 0,033 0,039 0,045 0,054 0,062 0,070 0,077 0,083 0,088
51 x D 0,5 x D 0,75 x D 60 – 100 fz 0,014 0,019 0,024 0,029 0,035 0,040 0,048 0,056 0,063 0,070 0,076 0,081
61 x D 0,4 x D 0,5 x D 50 – 75 fz 0,012 0,016 0,020 0,025 0,029 0,034 0,040 0,047 0,052 0,057 0,061 0,065
M
11 x D 0,5 x D 0,75 x D 90 – 115 fz 0,017 0,023 0,030 0,036 0,043 0,050 0,061 0,070 0,079 0,087 0,095 0,101
21 x D 0,4 x D 0,75 x D 60 – 80 fz 0,014 0,019 0,024 0,029 0,035 0,040 0,048 0,056 0,063 0,070 0,076 0,081
31 x D 0,4 x D 0,75 x D 60 – 70 fz 0,012 0,016 0,020 0,025 0,029 0,034 0,040 0,047 0,052 0,057 0,061 0,065
K
11 x D 0,5 x D 0,75 x D 120 – 150 fz 0,021 0,028 0,036 0,044 0,052 0,060 0,072 0,083 0,092 0,101 0,108 0,114
21 x D 0,5 x D 0,75 x D 110 – 140 fz 0,017 0,023 0,030 0,036 0,043 0,050 0,061 0,070 0,079 0,087 0,095 0,101
31 x D 0,4 x D 0,75 x D 110 – 130 fz 0,014 0,019 0,024 0,029 0,035 0,040 0,048 0,056 0,063 0,070 0,076 0,081
S
11 x D 0,3 x D 0,4 x D 50 – 90 fz 0,017 0,023 0,030 0,036 0,043 0,050 0,061 0,070 0,079 0,087 0,095 0,101
21 x D 0,3 x D 0,3 x D 25 – 40 fz 0,009 0,013 0,016 0,019 0,023 0,026 0,032 0,037 0,042 0,046 0,050 0,054
31 x D 0,4 x D 0,75 x D 60 – 80 fz 0,014 0,019 0,024 0,029 0,035 0,040 0,048 0,056 0,063 0,070 0,076 0,081
41 x D 0,4 x D 0,75 x D 50 – 60 fz 0,011 0,016 0,021 0,026 0,031 0,037 0,045 0,052 0,058 0,064 0,069 0,074
H11 x D 0,2 x D 0,3 x D 80 – 140 fz 0,016 0,021 0,027 0,033 0,039 0,045 0,054 0,062 0,070 0,077 0,083 0,088
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group.
Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on >12mm diameters.
WID_Master16_SolidEndMilling_HighPerformance_O068_O069_Metric_REBRAND.indd 68 10/30/15 2:22 PM
O69
LViWID M 16 S lidE dMilli Hi hP f O068 O069 M i REBRANDO b 2020153 58PM
widia.com
High-Performance Solid Carbide End Mills • Roughing
Application Data • Series 49H6
High-Performance Solid Carbide End Mills
Series 49H6
Material
Group
Side Milling (A)
and Slotting (B) TiAlN Recommended feed per tooth (fz = mm/th) for side milling (A).
For slotting (B), reduce fz by 20%.
AB
Cutting Speed —
vc
m/min
D1 — Diameter
ap ae ap min max mm 8,0 10,0 12,0 14,0 16,0 18,0 20,0
P
01,5 x D 0,5 x D 1 x D 150 – 200 fz 0,048 0,058 0,066 0,074 0,081 0,086 0,091
11,5 x D 0,5 x D 1 x D 150 – 200 fz 0,048 0,058 0,066 0,074 0,081 0,086 0,091
21,5 x D 0,5 x D 1 x D 140 – 190 fz 0,048 0,058 0,066 0,074 0,081 0,086 0,091
31,0 x D 0,4 x D 0,75 x D 120 – 160 fz 0,040 0,048 0,056 0,063 0,070 0,076 0,081
41,0 x D 0,3 x D 0,5 x D 90 – 150 fz 0,036 0,043 0,050 0,056 0,061 0,066 0,070
51,0 x D 0,4 x D 0,75 x D 60 – 100 fz 0,032 0,039 0,045 0,051 0,056 0,060 0,065
M
11,0 x D 0,4 x D 0,75 x D 90 – 115 fz 0,040 0,048 0,056 0,063 0,070 0,076 0,081
21,0 x D 0,4 x D 0,75 x D 60 – 80 fz 0,032 0,039 0,045 0,051 0,056 0,060 0,065
31,0 x D 0,4 x D 0,75 x D 60 – 70 fz 0,027 0,032 0,037 0,042 0,046 0,049 0,052
K
11,5 x D 0,5 x D 1 x D 120 – 150 fz 0,048 0,058 0,066 0,074 0,081 0,086 0,091
21,5 x D 0,4 x D 1 x D 110 – 140 fz 0,040 0,048 0,056 0,063 0,070 0,076 0,081
31,5 x D 0,4 x D 1 x D 110 – 130 fz 0,032 0,039 0,045 0,051 0,056 0,060 0,065
S11,5 x D 0,5 x D 0,75 x D 50 – 90 fz 0,040 0,048 0,056 0,063 0,070 0,076 0,081
31,5 x D 0,5 x D 0,75 x D 60 – 80 fz 0,032 0,039 0,045 0,051 0,056 0,060 0,065
H11,0 x D 0,3 x D 0,5 x D 80 – 140 fz 0,036 0,043 0,050 0,056 0,061 0,066 0,070
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group.
Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on >12mm diameters.
WID_Master16_SolidEndMilling_HighPerformance_O068_O069_Metric_REBRAND.indd 69 10/30/15 2:22 PM
O70
LViWID M 16 S lidE dMilli Hi hP f O070 O071 M i REBRANDO b 20 20153 58PM
widia.com
High-Performance Solid Carbide End Mills • Roughing
Application Data • Series 422150 422152
High-Performance Solid Carbide End Mills
Series 422150 422152
Material
Group
Side Milling (A)
and Slotting (B) K30F-DCHP Recommended feed per tooth (fz = mm/th) for side milling (A).
For slotting (B), reduce fz by 20%.
AB
AlTiN
Cutting Speed — vc
m/min D1 — Diameter
ap ae ap min max mm 6,0 8,0 10,0 12,0 16,0 20,0 25,0
P
11,5 x D 0,5 x D 1 x D 150 – 200 fz 0,031 0,041 0,049 0,060 0,073 0,082 0,087
21,5 x D 0,5 x D 1 x D 140 – 190 fz 0,031 0,041 0,049 0,060 0,073 0,082 0,087
31,5 x D 0,4 x D 1 x D 120 – 160 fz 0,025 0,034 0,041 0,051 0,063 0,073 0,080
41,5 x D 0,4 x D 0,75 x D 90 – 150 fz 0,023 0,030 0,037 0,045 0,055 0,063 0,068
51,5 x D 0,4 x D 0,75 x D 60 – 100 fz 0,021 0,027 0,033 0,040 0,050 0,058 0,064
K
11,5 x D 0,5 x D 1 x D 120 – 160 fz 0,031 0,041 0,049 0,060 0,073 0,082 0,087
21,5 x D 0,4 x D 1 x D 110 – 140 fz 0,025 0,034 0,041 0,051 0,063 0,073 0,080
31,5 x D 0,4 x D 1 x D 100 – 130 fz 0,021 0,027 0,033 0,040 0,050 0,058 0,064
S11,5 x D 0,5 x D 1 x D 50 – 90 fz 0,025 0,034 0,041 0,051 0,063 0,073 0,080
H11,5 x D 0,3 x D 0,75 x D 80 – 140 fz 0,023 0,030 0,037 0,045 0,055 0,063 0,068
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group.
Low cutting force through chipbreaker for use with unstable clamping and components.
Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on >12mm diameters.
WID_Master16_SolidEndMilling_HighPerformance_O070_O071_Metric_REBRAND.indd 70 10/30/15 2:22 PM
O71
LViWID M 16 S lidE dMilli Hi hP f O070 O071 M i REBRANDO b 2020153 58PM
widia.com
High-Performance Solid Carbide End Mills • Roughing
Application Data • Series 4976 • Victory™ Grades
High-Performance Solid Carbide End Mills
Series 4976 • Victory Grades
Material
Group
Side Milling (A)
and Slotting (B) WP15PE Recommended feed per tooth (fz = mm/th) for side milling (A).
For slotting (B), reduce fz by 20%.
AB
Cutting Speed
— vc
m/min
D1 — Diameter
ap ae ap min max mm 4,0 5,0 6,0 8,0 10,0 12,0 14,0 16,0 18,0 20,0 25,0
P
01,5 x D 0,5 x D 1 x D 150 – 200 fz 0,028 0,036 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114 0,124
11,5 x D 0,5 x D 1 x D 150 – 200 fz 0,028 0,036 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114 0,124
21,5 x D 0,5 x D 1 x D 140 – 190 fz 0,028 0,036 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114 0,124
31,5 x D 0,4 x D 0,75 x D 120 – 160 fz 0,023 0,030 0,036 0,050 0,061 0,070 0,079 0,087 0,095 0,101 0,114
41,5 x D 0,4 x D 0,75 x D 90 – 150 fz 0,021 0,027 0,033 0,045 0,054 0,062 0,070 0,077 0,083 0,088 0,098
51,5 x D 0,4 x D 0,75 x D 60 – 100 fz 0,019 0,024 0,029 0,040 0,048 0,056 0,063 0,070 0,076 0,081 0,091
M
11,5 x D 0,4 x D 0,75 x D 90 – 115 fz 0,023 0,030 0,036 0,050 0,061 0,070 0,079 0,087 0,095 0,101 0,114
21,5 x D 0,4 x D 0,75 x D 60 – 80 fz 0,019 0,024 0,029 0,040 0,048 0,056 0,063 0,070 0,076 0,081 0,091
31,5 x D 0,4 x D 0,75 x D 60 – 70 fz 0,016 0,020 0,025 0,034 0,040 0,047 0,052 0,057 0,061 0,065 0,071
K
11,5 x D 0,5 x D 1 x D 120 – 150 fz 0,028 0,036 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114 0,124
21,5 x D 0,4 x D 1 x D 110 – 140 fz 0,023 0,030 0,036 0,050 0,061 0,070 0,079 0,087 0,095 0,101 0,114
31,5 x D 0,4 x D 1 x D 110 – 130 fz 0,019 0,024 0,029 0,040 0,048 0,056 0,063 0,070 0,076 0,081 0,091
S
11,5 x D 0,3 x D 0,75 x D 50 – 90 fz 0,023 0,030 0,036 0,050 0,061 0,070 0,079 0,087 0,095 0,101 0,114
21,5 x D 0,3 x D 0,3 x D 25 – 40 fz 0,013 0,016 0,019 0,026 0,032 0,037 0,042 0,046 0,050 0,054 0,061
31,5 x D 0,4 x D 0,75 x D 60 – 80 fz 0,019 0,024 0,029 0,040 0,048 0,056 0,063 0,070 0,076 0,081 0,091
41,5 x D 0,3 x D 0,75 x D 50 – 60 fz 0,016 0,021 0,026 0,037 0,045 0,052 0,058 0,064 0,069 0,074 0,084
H11,5 x D 0,3 x D 0,3 x D 80 – 140 fz 0,021 0,027 0,033 0,045 0,054 0,062 0,070 0,077 0,083 0,088 0,098
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group.
Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on >12mm diameters.
WID_Master16_SolidEndMilling_HighPerformance_O070_O071_Metric_REBRAND.indd 71 10/30/15 2:22 PM
O72
LViWID M 16 S lidE dMilli Hi hP f O072 O073 M i REBRANDO b 20 20153 58PM
widia.com
High-Performance Solid Carbide End Mills • Roughing
Application Data • Series 422820 422824
High-Performance Solid Carbide End Mills
Series 422820 422824
Material
Group
Side Milling (A)
and Slotting (B) K30F-DCHP Recommended feed per tooth (fz = mm/th) for side milling (A).
For slotting (B), reduce fz by 20%.
AB
AlTiN
Cutting Speed — vc
m/min D1 — Diameter
ap ae ap min max mm 6,0 8,0 10,0 12,0 16,0 20,0 25,0
P
13 x D 0,25 x D 0,7 x D 150 – 200 fz 0,032 0,043 0,052 0,063 0,077 0,087 0,095
23 x D 0,25 x D 0,5 x D 140 – 190 fz 0,032 0,043 0,052 0,063 0,077 0,087 0,095
33 x D 0,25 x D 0,5 x D 120 – 160 fz 0,026 0,036 0,044 0,054 0,067 0,077 0,087
43 x D 0,25 x D 0,25 x D 90 – 150 fz 0,024 0,032 0,039 0,048 0,059 0,067 0,075
53 x D 0,25 x D 0,25 x D 60 – 100 fz 0,021 0,029 0,035 0,043 0,053 0,062 0,070
63 x D 0,25 x D 0,25 x D 50 – 75 fz 0,018 0,024 0,029 0,036 0,044 0,050 0,054
M13 x D 0,25 x D 0,5 x D 80 – 100 fz 0,026 0,036 0,044 0,054 0,067 0,077 0,087
33 x D 0,25 x D 0,5 x D 60 – 80 fz 0,018 0,024 0,029 0,036 0,044 0,050 0,054
K
13 x D 0,25 x D 0,5 x D 120 – 160 fz 0,032 0,043 0,052 0,063 0,077 0,087 0,095
23 x D 0,25 x D 0,5 x D 110 – 140 fz 0,026 0,036 0,044 0,054 0,067 0,077 0,087
33 x D 0,25 x D 0,5 x D 100 – 130 fz 0,021 0,029 0,035 0,043 0,053 0,062 0,070
S13 x D 0,25 x D 0,5 x D 50 – 90 fz 0,026 0,036 0,044 0,054 0,067 0,077 0,087
H13 x D 0,25 x D 0,5 x D 80 – 140 fz 0,024 0,032 0,039 0,048 0,059 0,067 0,075
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group.
Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on >12mm diameters.
WID_Master16_SolidEndMilling_HighPerformance_O072_O073_Metric_REBRAND.indd 72 10/30/15 2:22 PM
O73
LViWID M 16 S lidE dMilli Hi hP f O072 O073 M i REBRANDO b 2020153 58PM
widia.com
High-Performance Solid Carbide End Mills • Roughing
Application Data • Series 4U40 • Victory™ Grades
High-Performance Solid Carbide End Mills
Series 4U40 • Victory Grades
Material
Group
Side Milling (A)
and Slotting (B) WP15PE Recommended feed per tooth (fz = mm/th) for side milling (A).
For slotting (B), reduce fz by 20%.
AB
Cutting Speed — vc
m/min D1 — Diameter
ap ae ap min max mm 6,0 8,0 10,0 12,0 16,0 20,0 25,0
P
30,8 x D 0,5 x D 0,75 x D 120 – 160 fz 0,036 0,050 0,061 0,070 0,087 0,101 0,114
40,8 x D 0,4 x D 0,5 x D 90 – 150 fz 0,033 0,045 0,054 0,062 0,077 0,088 0,098
50,8 x D 0,5 x D 0,75 x D 60 – 100 fz 0,029 0,040 0,048 0,056 0,070 0,081 0,091
60,8 x D 0,4 x D 0,5 x D 50 – 75 fz 0,025 0,034 0,040 0,047 0,057 0,065 0,071
M
10,8 x D 0,5 x D 0,75 x D 90 – 115 fz 0,036 0,050 0,061 0,070 0,087 0,101 0,114
20,8 x D 0,4 x D 0,75 x D 60 – 80 fz 0,029 0,040 0,048 0,056 0,070 0,081 0,091
30,8 x D 0,4 x D 0,75 x D 60 – 70 fz 0,025 0,034 0,040 0,047 0,057 0,065 0,071
K
10,8 x D 0,5 x D 0,75 x D 120 – 150 fz 0,044 0,060 0,072 0,083 0,101 0,114 0,124
20,8 x D 0,5 x D 0,75 x D 110 – 140 fz 0,036 0,050 0,061 0,070 0,087 0,101 0,114
30,8 x D 0,4 x D 0,75 x D 110 – 130 fz 0,029 0,040 0,048 0,056 0,070 0,081 0,091
S
10,8 x D 0,4 x D 0,75 x D 50 – 90 fz 0,036 0,050 0,061 0,070 0,087 0,101 0,114
20,8 x D 0,25 x D 0,3 x D 25 – 40 fz 0,019 0,026 0,032 0,037 0,046 0,054 0,061
30,8 x D 0,4 x D 0,75 x D 60 – 80 fz 0,029 0,040 0,048 0,056 0,070 0,081 0,091
40,8 x D 0,3 x D 0,5 x D 50 – 60 fz 0,026 0,037 0,045 0,052 0,064 0,074 0,084
H
10,8 x D 0,5 x D 0,5 x D 80 – 140 fz 0,033 0,045 0,054 0,062 0,077 0,088 0,098
20,8 x D 0,2 x D 0,3 x D 70 – 120 fz 0,025 0,034 0,040 0,047 0,057 0,065 0,071
30,8 x D 0,15 x D 0,2 x D 60 – 90 fz 0,019 0,026 0,032 0,037 0,046 0,054 0,061
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group.
For rougher tool with 6 flutes, use ap in slotting 60% of table value.
Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on >12mm diameters.
WID_Master16_SolidEndMilling_HighPerformance_O072_O073_Metric_REBRAND.indd 73 10/30/15 2:22 PM
O74
LViWID M 16 S lidE dMilli Hi hP f O074 O075 M i REBRANDO b 20 20153 58PM
widia.com
High-Performance Solid Carbide End Mills • Roughing
Application Data • Series 4U70 • Victory™ Grades
High-Performance Solid Carbide End Mills
Series 4U70 • Victory Grades
Material
Group
Side Milling (A)
and Slotting (B) WP15PE Recommended feed per tooth (fz = mm/th) for side milling (A).
For slotting (B), reduce fz by 20%.
AB
Cutting Speed — vc
m/min D1 — Diameter
ap ae ap min max mm 6,0 8,0 10,0 12,0 16,0 20,0 25,0
P
31 x D 0,5 x D 0,75 x D 120 – 160 fz 0,036 0,050 0,061 0,070 0,087 0,101 0,114
41 x D 0,3 x D 0,75 x D 90 – 150 fz 0,033 0,045 0,054 0,062 0,077 0,088 0,098
51 x D 0,5 x D 0,75 x D 60 – 100 fz 0,029 0,040 0,048 0,056 0,070 0,081 0,091
61 x D 0,3 x D 0,3 x D 50 – 75 fz 0,025 0,034 0,040 0,047 0,057 0,065 0,071
M
11 x D 0,5 x D 0,75 x D 90 – 115 fz 0,036 0,050 0,061 0,070 0,087 0,101 0,114
21 x D 0,5 x D 0,75 x D 60 – 80 fz 0,029 0,040 0,048 0,056 0,070 0,081 0,091
31 x D 0,5 x D 0,75 x D 60 – 70 fz 0,025 0,034 0,040 0,047 0,057 0,065 0,071
K
11 x D 0,5 x D 1 x D 120 – 150 fz 0,044 0,060 0,072 0,083 0,101 0,114 0,124
21 x D 0,5 x D 1 x D 110 – 140 fz 0,036 0,050 0,061 0,070 0,087 0,101 0,114
31 x D 0,5 x D 1 x D 110 – 130 fz 0,029 0,040 0,048 0,056 0,070 0,081 0,091
S
11 x D 0,3 x D 0,75 x D 50 – 90 fz 0,036 0,050 0,061 0,070 0,087 0,101 0,114
21 x D 0,3 x D 0,3 x D 25 – 40 fz 0,019 0,026 0,032 0,037 0,046 0,054 0,061
31 x D 0,4 x D 0,75 x D 60 – 80 fz 0,029 0,040 0,048 0,056 0,070 0,081 0,091
41 x D 0,4 x D 0,75 x D 50 – 60 fz 0,026 0,037 0,045 0,052 0,064 0,074 0,084
H
11 x D 0,3 x D 0,3 x D 80 – 140 fz 0,033 0,045 0,054 0,062 0,077 0,088 0,098
21 x D 0,2 x D 0,2 x D 70 – 120 fz 0,025 0,034 0,040 0,047 0,057 0,065 0,071
31 x D 0,2 x D 0,2 x D 60 – 90 fz 0,019 0,026 0,032 0,037 0,046 0,054 0,061
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group.
For rougher tool with 6 flutes, use ap in slotting 60% of table value.
Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on >12mm diameters.
WID_Master16_SolidEndMilling_HighPerformance_O074_O075_Metric_REBRAND.indd 74 10/30/15 2:22 PM
O75
LViWID M 16 S lidE dMilli Hi hP f O074 O075 M i REBRANDO b 2020153 58PM
widia.com
High-Performance Solid Carbide End Mills • Roughing
Application Data • Series 49N6
High-Performance Solid Carbide End Mills
Series 49N6
Material
Group
Side Milling (A)
and Slotting (B) AlTiN Recommended feed per tooth (fz = mm/th) for side milling (A).
For slotting (B), reduce fz by 20%.
AB
Cutting Speed
— vc
m/min
D1 — Diameter
ap ae ap min max mm 4,0 5,0 6,0 8,0 10,0 12,0 14,0 16,0 18,0 20,0 25,0
P
01,5 x D 0,5 x D 1 x D 150 – 200 fz 0,024 0,031 0,037 0,051 0,061 0,070 0,079 0,086 0,092 0,097 0,105
11,5 x D 0,5 x D 1 x D 150 – 200 fz 0,024 0,031 0,037 0,051 0,061 0,070 0,079 0,086 0,092 0,097 0,105
21,5 x D 0,5 x D 1 x D 140 – 190 fz 0,024 0,031 0,037 0,051 0,061 0,070 0,079 0,086 0,092 0,097 0,105
31,5 x D 0,4 x D 0,75 x D 120 – 160 fz 0,020 0,025 0,031 0,043 0,051 0,060 0,067 0,074 0,080 0,086 0,097
41,5 x D 0,3 x D 0,5 x D 90 – 150 fz 0,018 0,023 0,028 0,038 0,046 0,053 0,060 0,065 0,070 0,075 0,083
51,5 x D 0,4 x D 0,75 x D 60 – 100 fz 0,016 0,021 0,025 0,034 0,041 0,048 0,054 0,059 0,064 0,069 0,077
M
11,5 x D 0,4 x D 0,75 x D 80 – 100 fz 0,020 0,025 0,031 0,043 0,051 0,060 0,067 0,074 0,080 0,086 0,097
21,5 x D 0,4 x D 0,75 x D 60 – 80 fz 0,016 0,021 0,025 0,034 0,041 0,048 0,054 0,059 0,064 0,069 0,077
31,5 x D 0,4 x D 0,75 x D 60 – 80 fz 0,014 0,017 0,021 0,029 0,034 0,040 0,044 0,048 0,052 0,055 0,060
K
11,5 x D 0,5 x D 1 x D 120 – 160 fz 0,024 0,031 0,037 0,051 0,061 0,070 0,079 0,086 0,092 0,097 0,105
21,5 x D 0,4 x D 1 x D 110 – 140 fz 0,020 0,025 0,031 0,043 0,051 0,060 0,067 0,074 0,080 0,086 0,097
31,5 x D 0,4 x D 1 x D 100 – 130 fz 0,016 0,021 0,025 0,034 0,041 0,048 0,054 0,059 0,064 0,069 0,077
S11,5 x D 0,4 x D 0,75 x D 50 – 90 fz 0,020 0,025 0,031 0,043 0,051 0,060 0,067 0,074 0,080 0,086 0,097
31,5 x D 0,4 x D 0,75 x D 60 – 80 fz 0,016 0,021 0,025 0,034 0,041 0,048 0,054 0,059 0,064 0,069 0,077
H11,5 x D 0,3 x D 0,3 x D 80 – 140 fz 0,018 0,023 0,028 0,038 0,046 0,053 0,060 0,065 0,070 0,075 0,083
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group.
Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on >12mm diameters.
WID_Master16_SolidEndMilling_HighPerformance_O074_O075_Metric_REBRAND.indd 75 10/30/15 2:22 PM
O76
LViWID M 16 S lidE dMilli Hi hP f O076 O077 M i REBRANDD b 14 201511 38AM
widia.com
High-Performance Solid Carbide End Mills • Roughing
Application Data • Series 4969
High-Performance Solid Carbide End Mills
Series 4969
Material
Group
Side Milling (A)
and Slotting (B) TiAlN Recommended feed per tooth (fz = mm/th) for side milling (A).
For slotting (B), reduce fz by 20%.
AB
Cutting Speed
— vc
m/min
D1 — Diameter
ap ae ap min max mm 5,0 6,0 8,0 10,0 12,0 14,0 16,0 18,0 20,0 25,0
P
01,5 x D 0,5 x D 1 x D 150 – 200 fz 0,036 0,044 0,060 0,072 0,083 0,092 0,101 0,107 0,114 0,124
11,5 x D 0,5 x D 1 x D 150 – 200 fz 0,036 0,044 0,060 0,072 0,083 0,092 0,101 0,107 0,114 0,124
21,5 x D 0,5 x D 1 x D 140 – 190 fz 0,036 0,044 0,060 0,072 0,083 0,092 0,101 0,107 0,114 0,124
31,5 x D 0,4 x D 0,75 x D 120 – 160 fz 0,030 0,036 0,050 0,061 0,070 0,079 0,087 0,094 0,101 0,114
41,5 x D 0,3 x D 0,3 x D 90 – 150 fz 0,027 0,033 0,045 0,054 0,062 0,070 0,077 0,082 0,088 0,098
51,5 x D 0,4 x D 0,75 x D 60 – 100 fz 0,024 0,029 0,040 0,048 0,056 0,063 0,070 0,075 0,081 0,091
61,5 x D 0,3 x D 0,3 x D 50 – 75 fz 0,020 0,025 0,034 0,040 0,047 0,052 0,057 0,061 0,065 0,071
M
11,5 x D 0,4 x D 0,75 x D 80 – 100 fz 0,030 0,036 0,050 0,061 0,070 0,079 0,087 0,094 0,101 0,114
21,5 x D 0,4 x D 0,75 x D 60 – 80 fz 0,024 0,029 0,040 0,048 0,056 0,063 0,070 0,075 0,081 0,091
31,5 x D 0,4 x D 0,75 x D 60 – 80 fz 0,020 0,025 0,034 0,040 0,047 0,052 0,057 0,061 0,065 0,071
K
11,5 x D 0,5 x D 1 x D 120 – 160 fz 0,036 0,044 0,060 0,072 0,083 0,092 0,101 0,107 0,114 0,124
21,5 x D 0,4 x D 1 x D 110 – 140 fz 0,030 0,036 0,050 0,061 0,070 0,079 0,087 0,094 0,101 0,114
31,5 x D 0,4 x D 1 x D 100 – 130 fz 0,024 0,029 0,040 0,048 0,056 0,063 0,070 0,075 0,081 0,091
S
11,5 x D 0,4 x D 0,75 x D 50 – 90 fz 0,030 0,036 0,050 0,061 0,070 0,079 0,087 0,094 0,101 0,114
21,5 x D 0,3 x D 0,3 x D 25 – 40 fz 0,016 0,019 0,026 0,032 0,037 0,042 0,046 0,050 0,054 0,061
31,5 x D 0,4 x D 0,75 x D 60 – 80 fz 0,024 0,029 0,040 0,048 0,056 0,063 0,070 0,075 0,081 0,091
41,5 x D 0,3 x D 0,75 x D 50 – 60 fz 0,021 0,026 0,037 0,045 0,052 0,058 0,064 0,069 0,074 0,084
H
11,5 x D 0,3 x D 0,3 x D 80 – 140 fz 0,027 0,033 0,045 0,054 0,062 0,070 0,077 0,082 0,088 0,098
21,5 x D 0,2 x D 0,2 x D 70 – 120 fz 0,020 0,025 0,034 0,040 0,047 0,052 0,057 0,061 0,065 0,071
31,5 x D 0,2 x D 0,2 x D 60 – 90 fz 0,016 0,019 0,026 0,032 0,037 0,042 0,046 0,050 0,054 0,061
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group.
Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on >12mm diameters.
WID_Master16_SolidEndMilling_HighPerformance_O076_O077_Metric_REBRAND.indd 76 12/14/15 11:46 AM
O77
LViWID M 16 S lidE dMilli Hi hP f O076 O077 M i REBRANDD b 14201511 46AM
widia.com
High-Performance Solid Carbide End Mills • Roughing
Application Data • Series 022813 422813
High-Performance Solid Carbide End Mills
Series 022813 422813
Material
Group
Side Milling (A)
and Slotting (B) K30F K30F-DCF Recommended feed per tooth (fz = mm/th) for side milling (A).
For slotting (B), reduce fz by 20%.
AB
Uncoated TiAlN
Cutting Speed
— vc
m/min
Cutting Speed
— vc
m/min
D1 — Diameter
ap ae ap min max min max mm 6,0 8,0 10,0 12,0 16,0 20,0 25,0
P
11 x D 0,5 x D 1 x D 60 – 80 150 – 200 fz 0,032 0,043 0,052 0,063 0,077 0,087 0,097
21 x D 0,5 x D 1 x D 56 – 76 140 – 190 fz 0,032 0,043 0,052 0,063 0,077 0,087 0,097
31 x D 0,5 x D 1 x D – – – 120 – 160 fz 0,026 0,036 0,044 0,054 0,067 0,077 0,088
41 x D 0,4 x D 1 x D – – – 90 – 150 fz 0,024 0,032 0,039 0,048 0,059 0,067 0,076
M11 x D 0,4 x D 0,75 x D – – – 80 – 100 fz 0,026 0,036 0,044 0,054 0,067 0,077 0,088
21 x D 0,4 x D 0,5 x D – – – 60 – 80 fz 0,018 0,024 0,029 0,036 0,044 0,050 0,056
K
11 x D 0,5 x D 1 x D 48 – 64 120 – 160 fz 0,032 0,043 0,052 0,063 0,077 0,087 0,097
21 x D 0,4 x D 1 x D 44 – 56 110 – 140 fz 0,026 0,036 0,044 0,054 0,067 0,077 0,088
31 x D 0,4 x D 1 x D 40 – 52 100 – 130 fz 0,021 0,029 0,035 0,043 0,053 0,062 0,070
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group.
Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on >12mm diameters.
WID_Master16_SolidEndMilling_HighPerformance_O076_O077_Metric_REBRAND.indd 77 12/14/15 11:46 AM
O78
LViWID M 16 S lidE dMilli Hi hP f O078 O079 M i REBRANDO b 20 20153 57PM
widia.com
High-Performance Solid Carbide End Mills • Roughing
Application Data • Series 022818 422818
High-Performance Solid Carbide End Mills
Series 022818 422818
Material
Group
Side Milling (A)
and Slotting (B) K30F K30F-DCF Recommended feed per tooth (fz = mm/th) for side milling (A).
For slotting (B), reduce fz by 20%.
AB
Uncoated TiAlN
Cutting Speed
— vc
m/min
Cutting Speed
— vc
m/min
D1 — Diameter
ap ae ap min max min max mm 6,0 8,0 10,0 12,0 16,0 20,0
P
11,5 x D 0,5 x D 1 x D 60 – 80 150 – 200 fz 0,033 0,041 0,049 0,060 0,073 0,082
21,5 x D 0,5 x D 1 x D 56 – 76 140 – 190 fz 0,033 0,041 0,049 0,060 0,073 0,082
31,5 x D 0,4 x D 1 x D – – – 120 – 160 fz 0,027 0,034 0,041 0,051 0,063 0,073
41,5 x D 0,4 x D 0,75 x D – – – 90 – 150 fz 0,024 0,030 0,037 0,045 0,055 0,063
K
11,5 x D 0,5 x D 1 x D – – – 120 – 160 fz 0,033 0,041 0,049 0,060 0,073 0,082
21,5 x D 0,4 x D 1 x D – – – 110 – 140 fz 0,027 0,034 0,041 0,051 0,063 0,073
31,5 x D 0,4 x D 1 x D – – – 100 – 130 fz 0,021 0,027 0,033 0,040 0,050 0,058
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group.
Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on >12mm diameters.
WID_Master16_SolidEndMilling_HighPerformance_O078_O079_Metric_REBRAND.indd 78 10/30/15 2:22 PM
O79
LViWID M 16 S lidE dMilli Hi hP f O078 O079 M i REBRANDO b 2020153 57PM
widia.com
High-Performance Solid Carbide End Mills • Roughing
Application Data • Series 022846 422846
High-Performance Solid Carbide End Mills
Series 022846 422846
Material
Group
Side Milling (A)
and Slotting (B) K30F K30F-DCF Recommended feed per tooth (fz = mm/th) for side milling (A).
For slotting (B), reduce fz by 20%.
AB
Uncoated TiAlN
Cutting Speed
— vc
m/min
Cutting Speed
— vc
m/min
D1 — Diameter
ap ae ap min max min max mm 6,0 8,0 10,0 12,0 16,0 20,0 25,0
P
01,5 x D 0,5 x D 1 x D 60 – 80 150 – 200 fz 0,033 0,045 0,054 0,062 0,076 0,086 0,093
11,5 x D 0,5 x D 1 x D 60 – 80 150 – 200 fz 0,033 0,045 0,054 0,062 0,076 0,086 0,093
21,5 x D 0,5 x D 1 x D 56 – 76 140 – 190 fz 0,033 0,045 0,054 0,062 0,076 0,086 0,093
31,5 x D 0,4 x D 1 x D – – – 120 – 160 fz 0,027 0,038 0,045 0,053 0,065 0,076 0,085
41,5 x D 0,4 x D 0,75 x D – – – 90 – 150 fz 0,025 0,034 0,041 0,047 0,058 0,066 0,073
51,5 x D 0,4 x D 0,75 x D – – – 60 – 100 fz 0,022 0,030 0,036 0,042 0,052 0,061 0,068
K
11,5 x D 0,5 x D 1 x D – – – 120 – 150 fz 0,033 0,045 0,054 0,062 0,076 0,086 0,093
21,5 x D 0,4 x D 1 x D – – – 110 – 140 fz 0,027 0,038 0,045 0,053 0,065 0,076 0,085
31,5 x D 0,4 x D 1 x D – – – 110 – 130 fz 0,022 0,030 0,036 0,042 0,052 0,061 0,068
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group.
Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on >12mm diameters.
WID_Master16_SolidEndMilling_HighPerformance_O078_O079_Metric_REBRAND.indd 79 10/30/15 2:22 PM
O80
LViWID M 16 S lidE dMilli Hi hP f O080 O081 M i REBRANDO b 20 20153 57PM
widia.com
High-Performance Solid Carbide End Mills • Roughing
Application Data • Series 4906
High-Performance Solid Carbide End Mills
Series 4906
Material
Group
Side Milling (A)
and Slotting (B) TiCN TiAlN Recommended feed per tooth (fz = mm/th) for side milling (A).
For slotting (B), reduce fz by 20%.
AB
Cutting Speed
— vc
m/min
Cutting Speed
— vc
m/min
D1 — Diameter
ap ae ap min max min max mm 4,0 5,0 6,0 8,0 10,0 12,0 14,0 16,0 18,0 20,0 25,0
P
01,5 x D 0,5 x D 1 x D 120 – 160 150 – 200 fz 0,024 0,031 0,037 0,051 0,061 0,070 0,079 0,086 0,092 0,097 0,105
11,5 x D 0,5 x D 1 x D 120 – 160 150 – 200 fz 0,024 0,031 0,037 0,051 0,061 0,070 0,079 0,086 0,092 0,097 0,105
21,5 x D 0,5 x D 1 x D 112 – 152 140 – 190 fz 0,024 0,031 0,037 0,051 0,061 0,070 0,079 0,086 0,092 0,097 0,105
31,5 x D 0,4 x D 0,75 x D 96 – 128 120 – 160 fz 0,020 0,025 0,031 0,043 0,051 0,060 0,067 0,074 0,080 0,086 0,097
41,5 x D 0,3 x D 0,3 x D 72 – 120 90 – 150 fz 0,018 0,023 0,028 0,038 0,046 0,053 0,060 0,065 0,070 0,075 0,083
51,5 x D 0,4 x D 0,75 x D 48 – 80 60 – 100 fz 0,016 0,021 0,025 0,034 0,041 0,048 0,054 0,059 0,064 0,069 0,077
M
11,5 x D 0,4 x D 0,75 x D 72 – 92 90 – 115 fz 0,020 0,025 0,031 0,043 0,051 0,060 0,067 0,074 0,080 0,086 0,097
21,5 x D 0,4 x D 0,75 x D 48 – 64 60 – 80 fz 0,016 0,021 0,025 0,034 0,041 0,048 0,054 0,059 0,064 0,069 0,077
31,5 x D 0,4 x D 0,75 x D 48 – 56 60 – 70 fz 0,014 0,017 0,021 0,029 0,034 0,040 0,044 0,048 0,052 0,055 0,060
K
11,5 x D 0,5 x D 1 x D 96 – 120 120 – 150 fz 0,024 0,031 0,037 0,051 0,061 0,070 0,079 0,086 0,092 0,097 0,105
21,5 x D 0,4 x D 1 x D 88 – 112 110 – 140 fz 0,020 0,025 0,031 0,043 0,051 0,060 0,067 0,074 0,080 0,086 0,097
31,5 x D 0,4 x D 1 x D 88 – 104 110 – 130 fz 0,016 0,021 0,025 0,034 0,041 0,048 0,054 0,059 0,064 0,069 0,077
S11,5 x D 0,4 x D 0,75 x D 40 – 72 50 – 90 fz 0,020 0,025 0,031 0,043 0,051 0,060 0,067 0,074 0,080 0,086 0,097
31,5 x D 0,3 x D 0,3 x D 48 – 64 60 – 80 fz 0,016 0,021 0,025 0,034 0,041 0,048 0,054 0,059 0,064 0,069 0,077
H11,5 x D 0,3 x D 0,3 x D 64 – 112 80 – 140 fz 0,018 0,023 0,028 0,038 0,046 0,053 0,060 0,065 0,070 0,075 0,083
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group.
Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on >12mm diameters.
WID_Master16_SolidEndMilling_HighPerformance_O080_O081_Metric_REBRAND.indd 80 10/30/15 2:22 PM
O81
LViWID M 16 S lidE dMilli Hi hP f O080 O081 M i REBRANDO b 2020153 57PM
widia.com
High-Performance Solid Carbide End Mills • Roughing
Application Data • Series 4966
High-Performance Solid Carbide End Mills
Series 4966
Material
Group
Side Milling (A)
and Slotting (B) TiCN TiAlN Recommended feed per tooth (fz = mm/th) for side milling (A).
For slotting (B), reduce fz by 20%.
AB
Cutting Speed
— vc
m/min
Cutting Speed
— vc
m/min
D1 — Diameter
ap ae ap min max min max mm 5,0 6,0 8,0 10,0 12,0 16,0 18,0 20,0 25,0
P
01,5 x D 0,5 x D 1 x D 120 – 160 150 – 200 fz 0,030 0,036 0,049 0,059 0,068 0,083 0,089 0,093 0,101
11,5 x D 0,5 x D 1 x D 120 – 160 150 – 200 fz 0,030 0,036 0,049 0,059 0,068 0,083 0,089 0,093 0,101
21,5 x D 0,5 x D 1 x D 112 – 152 140 – 190 fz 0,030 0,036 0,049 0,059 0,068 0,083 0,089 0,093 0,101
31,5 x D 0,4 x D 0,75 x D 96 – 128 120 – 160 fz 0,024 0,030 0,041 0,050 0,058 0,072 0,077 0,083 0,093
41,5 x D 0,3 x D 0,5 x D 72 – 120 90 – 150 fz 0,022 0,027 0,037 0,044 0,051 0,063 0,068 0,072 0,080
51,5 x D 0,4 x D 0,75 x D 48 – 80 60 – 100 – 0,020 0,024 0,033 0,040 0,046 0,057 0,062 0,066 0,075
M
11,5 x D 0,4 x D 0,75 x D 72 – 92 90 – 115 fz 0,024 0,030 0,041 0,050 0,058 0,072 0,077 0,083 0,093
21,5 x D 0,4 x D 0,75 x D 48 – 64 60 – 80 fz 0,020 0,024 0,033 0,040 0,046 0,057 0,062 0,066 0,075
31,5 x D 0,4 x D 0,75 x D 48 – 56 60 – 70 fz 0,017 0,020 0,028 0,033 0,038 0,047 0,050 0,053 0,058
K
11,5 x D 0,5 x D 1 x D 96 – 120 120 – 150 fz 0,030 0,036 0,049 0,059 0,068 0,083 0,089 0,093 0,101
21,5 x D 0,4 x D 1 x D 88 – 112 110 – 140 fz 0,024 0,030 0,041 0,050 0,058 0,072 0,077 0,083 0,093
31,5 x D 0,4 x D 1 x D 88 – 104 110 – 130 fz 0,020 0,024 0,033 0,040 0,046 0,057 0,062 0,066 0,075
S11,5 x D 0,4 x D 0,75 x D 40 – 72 50 – 90 fz 0,024 0,030 0,041 0,050 0,058 0,072 0,077 0,083 0,093
31,5 x D 0,4 x D 0,75 x D 48 – 64 60 – 80 fz 0,020 0,024 0,033 0,040 0,046 0,057 0,062 0,066 0,075
H11,5 x D 0,3 x D 0,5 x D 64 – 112 80 – 140 fz 0,022 0,027 0,037 0,044 0,051 0,063 0,068 0,072 0,080
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group.
Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on >12mm diameters.
WID_Master16_SolidEndMilling_HighPerformance_O080_O081_Metric_REBRAND.indd 81 10/30/15 2:22 PM
O82
LViWID M 16 S lidE dMilli Hi hP f O082 O083 M i REBRANDN b 13 20153 57PM
widia.com
Only the fi nest carbide substrates with market-leading geometries and state-of-the-
art surface technology are used to ensure the very best quality fi nishing end mills are
produced. These tools are fully compliant with NAS, DIN, and JIS specifi cations. Whether
you require higher metal removal rates, improved surface fi nishes, fewer passes, or longer
tool life, WIDIA-Hanita™ high-performance fi nishing end mills deliver the reliability and
consistency you can depend on during your critical fi nishing operations.
• Specifi c geometries targeted for steels, stainless steels,
high-temperature alloys, and titanium.
• Stub, regular, long, and extra long lengths for all applications.
• Special designs with higher number of fl utes and increased
helix angles for super fi nishing applications.
• Latest coating technology, including Victory™ grades.
Centre Cutting
Improved fl oor fi nishing.
Unique Geometries
Designed to be
material-specifi c. Both Cylindrical and Weldon® shanks
Options for all applications.
Designed Profi les
Multiple fl utes and higher helix for
super fi nishing applications.
Latest coating technology
Available with Victory™ grade technology.
HP Finishers
High-Performance Finishing
Solid Carbide End Mills
WID_Master16_SolidEndMilling_HighPerformance_O082_O083_Metric_REBRAND.indd 82 11/13/15 4:23 PM
O83
LViWID M 16 S lidE dMilli Hi hP f O082 O083 M i REBRANDN b 132015357PM
widia.com
• Specifi cally designed geometries for fi nishing in a wide range of materials.
• Higher number of fl utes and higher helix angles for super fi nishing applications.
• High Metal Removal Rates (MRR) requiring fewer passes and longer tool life while providing superior surface fi nishes.
High-Performance Solid Carbide Finishing
4001 JJ Series D503 D513 Series
• Centre cutting.
• 2-fl ute.
• 30° helix.
• Ball nose.
• JIS.
• Victory™ grade WP15PE™.
• Centre cutting.
• 3-fl ute.
• 45° helix.
• DIN 6527.
DC03 Series 4503 JJ Series
• Centre cutting.
• 3-fl ute.
• 35° helix.
• Corner radius.
• DIN 6527.
• Centre cutting.
• 3-fl ute.
• 45° helix.
• JIS.
• Victory grade WP15PE.
422802/322802/022802 Series 4603 Series
• Centre cutting.
• 3-fl ute.
• 45° helix.
• Chamfered corner.
• DIN 6527.
• Universal application.
• Centre cutting.
• 3-fl ute.
• 60° helix.
• Light fi nishing.
D507 D517 Series 422826 422822 Series
• Centre cutting.
• 6-fl ute.
• 45° helix.
• DIN 6527.
• Light fi nishing.
• Non-centre cutting.
• 6- and 8-fl utes.
• 45° helix.
• DIN 6527.
• Light fi nishing.
422827 Series D518 Series
• Non-centre cutting.
• 6- and 8-fl utes.
• 45° helix.
• Chamfered corner.
• Centre cutting.
• 4-, 6-, and 8-fl utes.
• 50° helix.
• DIN 6527.
• Super fi nishing applications.
026621 Series 024112 Series
• Non-centre cutting.
• 4-, 6-, and 8-fl utes.
• 45° helix.
• Chamfer corner.
• DIN 6527.
• Finishing of steels and cast irons.
• Cermet construction.
• Centre cutting.
• 2-fl ute.
• 20° helix.
• Torus style.
• Diamond coating.
• Non-ferrous applications.
024111 Series
• Centre cutting.
• 2-fl ute.
• 20° helix.
• Ball nose.
• Diamond coating.
• Non-ferrous applications.
WID_Master16_SolidEndMilling_HighPerformance_O082_O083_Metric_REBRAND.indd 83 11/13/15 4:23 PM
O84
LViWID M 16 S lidE dMilli Hi hP f O084 O085 M i REBRANDN b 11 20158 51AM
widia.com
WP15PE
High-Performance Solid Carbide End Mills • Finishing
Series 4001 JJ • JIS • Victory™ Grades
Series 4001 JJ • Victory Grades
grade WP15PE
AlTiN
order # catalogue # D1 D D3
length of cut
Ap1 max L3
length
L
5559146 400101001T 1,0 4 — 3,00 3 50
5559147 400101501T 1,5 4 — 3,00 3 50
5559148 400102001T 2,0 4 — 3,00 3 50
5559149 400103002T 3,0 6 — 9,50 10 58
5559160 400104002T 4,0 6 — 12,00 12 76
5559161 400105002T 5,0 6 — 14,00 14 76
5559162 400106002T 6,0 6 5,6 16,00 40 100
5559163 400108003T 8,0 8 7,5 20,00 40 100
5559164 400110004T 10,0 10 9,4 22,00 35 100
5559165 400112005T 12,0 12 11,3 25,00 50 125
5559166 400114005T 14,0 14 13,2 32,00 57 125
5559167 400116006T 16,0 16 15,0 32,00 60 150
5559168 400118006T 18,0 18 16,9 38,00 60 150
5559169 400120007T 20,0 20 18,8 38,00 60 150
• Centre cutting.
• Standard items listed. Additional
styles and coatings made-to-order.
rst choice
alternate choice
End Mill Tolerances
D1 tolerance e8 D
tolerance h6
+ / -
) 3 -0,014/-0,028 ) 3 0/-0,006
> 3–6 -0,020/-0,038 > 3–6 0/-0,008
> 6–10 -0,025/-0,047 > 6–10 0/-0,009
> 10–18 -0,032/-0,059 > 10–18 0/-0,011
> 18–30 -0,040/-0,073 > 18–30 0/-0,013
High-Performance Solid Carbide End Mills
WID_Master16_SolidEndMilling_HighPerformance_O084_O085_Metric_REBRAND.indd 84 11/11/15 9:37 AM
O85
LViWID M 16 S lidE dMilli Hi hP f O084 O085 M i REBRANDN b 112015851AM
widia.com
High-Performance Solid Carbide End Mills • Finishing
Series D503 D513
End Mill Tolerances
D1 tolerance e8 D
tolerance h6
+ / -
) 3 -0,014/-0,028 ) 3 0/-0,006
> 3–6 -0,020/-0,038 > 3–6 0/-0,008
> 6–10 -0,025/-0,047 > 6–10 0/-0,009
> 10–18 -0,032/-0,059 > 10–18 0/-0,011
> 18–30 -0,040/-0,073 > 18–30 0/-0,013
Series D503 D513
UNCOATED - WW TICN-CW TiAlN-RW
• Centre cutting.
• Standard items listed. Additional
styles and coatings made-to-order.
rst choice
alternate choice
grade UNCOATED-WW
order # catalogue #
grade TiCN-CW
TiCN
order # catalogue #
grade TiAlN-RW
TiAlN
order # catalogue # D1 D
length of cut
Ap1 max
length
L
1661576 D50302002WW 1661573 D50302002CW 1661574 D50302002RW 2,0 6 3,00 50
1661580 D50303002WW 1661577 D50303002CW 1661578 D50303002RW 3,0 6 4,00 50
1661682 D51303002WW — 1661680 D51303002RW 3,0 6 7,00 57
1661585 D50304002WW 1661582 D50304002CW 1661583 D50304002RW 4,0 6 5,00 54
1661686 D51304002WW — 1661684 D51304002RW 4,0 6 8,00 57
1661590 D50305002WW 1661587 D50305002CW 1661588 D50305002RW 5,0 6 6,00 54
1661690 D51305002WW — 1661688 D51305002RW 5,0 6 10,00 57
1661595 D50306002WW 1661592 D50306002CW 1661593 D50306002RW 6,0 6 7,00 54
1661694 D51306002WW — 1661692 D51306002RW 6,0 6 10,00 57
1661605 D50308003WW 1661601 D50308003CW 1661603 D50308003RW 8,0 8 9,00 58
1661703 D51308003WW — 1661701 D51308003RW 8,0 8 16,00 63
1661614 D50310004WW 1661611 D50310004CW 1661612 D50310004RW 10,0 10 11,00 66
1661712 D51310004WW — 1661710 D51310004RW 10,0 10 19,00 72
1661619 D50312005WW — 1661617 D50312005RW 12,0 12 12,00 73
1661717 D51312005WW — 1661715 D51312005RW 12,0 12 22,00 83
— — 1661622 D50314014RW 14,0 14 14,00 75
— — 1661720 D51314014RW 14,0 14 22,00 83
1661629 D50316006WW — 1661627 D50316006RW 16,0 16 16,00 82
1661727 D51316006WW — 1661725 D51316006RW 16,0 16 26,00 92
1661732 D51318018WW — 1661730 D51318018RW 18,0 18 26,00 92
— — 1661636 D50320007RW 20,0 20 20,00 92
1661737 D51320007WW — 1661735 D51320007RW 20,0 20 32,00 104
High-Performance Solid Carbide End Mills
WID_Master16_SolidEndMilling_HighPerformance_O084_O085_Metric_REBRAND.indd 85 11/11/15 9:37 AM
O86
LViWID M 16 S lidE dMilli Hi hP f O086 O087 M i REBRANDO b 20 20153 56PM
widia.com
TiAlN-LW
High-Performance Solid Carbide End Mills • Finishing
Series DC03
Series DC03
grade TiAlN-LW
TiAlN
order # catalogue # D1 D
length of cut
Ap1 max
length
LR¡
1661856 DC0303002LW 3,0 6 4,00 50 0,25
1661858 DC0304002LW 4,0 6 5,00 54 0,25
1661860 DC0305002LW 5,0 6 6,00 54 0,25
1661862 DC0306002LW 6,0 6 7,00 54 0,45
1661866 DC0308003LW 8,0 8 9,00 58 0,45
1661868 DC0310004LW 10,0 10 11,00 66 0,45
1661870 DC0312005LW 12,0 12 12,00 73 0,45
1661872 DC0314014LW 14,0 14 14,00 75 0,45
1661874 DC0316006LW 16,0 16 16,00 82 0,45
1661876 DC0318018LW 18,0 18 18,00 84 0,45
1661878 DC0320007LW 20,0 20 20,00 92 0,45
• Centre cutting.
• Standard items listed. Additional
styles and coatings made-to-order.
rst choice
alternate choice
End Mill Tolerances
D1 tolerance e8 D
tolerance h6
+ / -
) 3 -0,014/-0,028 ) 3 0/-0,006
> 3–6 -0,020/-0,038 > 3–6 0/-0,008
> 6–10 -0,025/-0,047 > 6–10 0/-0,009
> 10–18 -0,032/-0,059 > 10–18 0/-0,011
> 18–30 -0,040/-0,073 > 18–30 0/-0,013
High-Performance Solid Carbide End Mills
WID_Master16_SolidEndMilling_HighPerformance_O086_O087_Metric_REBRAND.indd 86 10/30/15 2:23 PM
O87
LViWID M 16 S lidE dMilli Hi hP f O086 O087 M i REBRANDO b 2020153 56PM
widia.com
WP15PE
High-Performance Solid Carbide End Mills • Finishing
Series 4503 JJ • JIS • Victory™ Grades
End Mill Tolerances
D1 tolerance e8 D
tolerance h6
+ / -
) 3 -0,014/-0,028 ) 3 0/-0,006
> 3–6 -0,020/-0,038 > 3–6 0/-0,008
> 6–10 -0,025/-0,047 > 6–10 0/-0,009
> 10–18 -0,032/-0,059 > 10–18 0/-0,011
> 18–30 -0,040/-0,073 > 18–30 0/-0,013
Series 4503 JJ • Victory Grades
grade WP15PE
AlTiN
order # catalogue # D1 D
length of cut
Ap1 max
length
L
5559170 450301001T 1,0 4 3,00 50
5559171 450301501T 1,5 4 3,00 50
5559172 450302001T 2,0 4 3,00 50
5559173 450302501T 2,5 4 4,00 50
5559174 450302511T 2,5 4 5,00 50
5559175 450303002T 3,0 6 8,00 50
5559176 450303502T 3,5 6 12,00 50
5559177 450304002T 4,0 6 12,00 50
5559178 450304502T 4,5 6 14,00 50
5559179 450305002T 5,0 6 14,00 50
5559180 450306002T 6,0 6 16,00 50
5559181 450308003T 8,0 8 20,00 63
5559182 450310004T 10,0 10 22,00 76
5559183 450312005T 12,0 12 25,00 76
5559184 450316006T 16,0 16 32,00 89
5559185 450320007T 20,0 20 38,00 104
• Centre cutting.
• Standard items listed. Additional
styles and coatings made-to-order.
rst choice
alternate choice
High-Performance Solid Carbide End Mills
WID_Master16_SolidEndMilling_HighPerformance_O086_O087_Metric_REBRAND.indd 87 10/30/15 2:23 PM
O88
LViWID M 16 S lidE dMilli Hi hP f O088 O089 M i REBRANDO b 20 20153 56PM
widia.com
K30F K30F K30F-TICN K30F-TICN
High-Performance Solid Carbide End Mills • Finishing
Series 022801 022804 022802 322806 322801 322804 322802
422806 422801 422804 422802 422806
Series 022801 022804 022802 322806 322801 322804 322802 422806
grade K30F
uncoated
order # catalogue #
grade K30F
uncoated
order # catalogue #
grade K30F-TiCN
TiCN
order # catalogue #
grade K30F-TiCN
TiCN
order # catalogue # D1 D
length of cut
Ap1 max
length
L BCH
2332115 022801-000020 2332132 022802-000020 2335347 322801-000020 2335365 322802-000020 2,0 6 3,00 50 0,10
3048459 022804-000020 3048480 022806-000020 3048485 322804-000020 3048488 322806-000020 2,0 6 6,00 57 0,10
2332116 022801-000025 2332133 022802-000025 2335348 322801-000025 2335366 322802-000025 2,5 6 3,00 50 0,10
3048461 022804-000025 3048483 022806-000025 3048486 322804-000025 3048489 322806-000025 2,5 6 7,00 57 0,10
2332117 022801-000030 2332135 022802-000030 2335349 322801-000030 2335368 322802-000030 3,0 6 4,00 50 0,10
2332153 022804-000030 2345784 022806-000030 2335388 322804-000030 2335403 322806-000030 3,0 6 7,00 57 0,10
2332118 022801-000035 2332136 022802-000035 2335350 322801-000035 2335369 322802-000035 3,5 6 4,00 50 0,10
2332154 022804-000035 2332170 022806-000035 2335389 322804-000035 2335404 322806-000035 3,5 6 7,00 57 0,10
2332119 022801-000040 2332137 022802-000040 2335351 322801-000040 2335370 322802-000040 4,0 6 5,00 54 0,10
2332155 022804-000040 2332171 022806-000040 2335390 322804-000040 2335406 322806-000040 4,0 6 8,00 57 0,10
— 2332138 022802-000045 2335352 322801-000045 2335371 322802-000045 4,5 6 5,00 54 0,10
2332156 022804-000045 2332172 022806-000045 2335391 322804-000045 2335407 322806-000045 4,5 6 8,00 57 0,10
2332121 022801-000050 2332139 022802-000050 2335353 322801-000050 2335372 322802-000050 5,0 6 6,00 54 0,10
2332157 022804-000050 2332173 022806-000050 2335392 322804-000050 2335408 322806-000050 5,0 6 10,00 57 0,10
2332122 022801-000060 2332140 022802-000060 2335354 322801-000060 2335374 322802-000060 6,0 6 7,00 54 0,10
2332158 022804-000060 2332174 022806-000060 2335393 322804-000060 2335409 322806-000060 6,0 6 10,00 57 0,10
2332123 022801-000070 — 2335355 322801-000070 2335376 322802-000070 7,0 8 8,00 58 0,20
2332159 022804-000070 2332175 022806-000070 2335394 322804-000070 2335410 322806-000070 7,0 8 13,00 63 0,20
2332124 022801-000080 — 2335356 322801-000080 2335378 322802-000080 8,0 8 9,00 58 0,20
2332160 022804-000080 2332176 022806-000080 2335395 322804-000080 2335411 322806-000080 8,0 8 16,00 63 0,20
• Centre cutting.
• Standard items listed. Additional
styles and coatings made-to-order.
rst choice
alternate choice
End Mill Tolerances
D1
tolerance h10
+ / - D
tolerance h6
+ / -
) 3 0/-0,040 ) 3 0/-0,006
> 3–6 0/-0,048 > 3–6 0/-0,008
> 6–10 0/-0,058 > 6–10 0/-0,009
> 10–18 0/-0,070 > 10–18 0/-0,011
> 18–30 0/-0,084 > 18–30 0/-0,013
High-Performance Solid Carbide End Mills
(continued)
Detail X
WID_Master16_SolidEndMilling_HighPerformance_O088_O089_Metric_REBRAND.indd 88 10/30/15 2:23 PM
O89
LViWID M 16 S lidE dMilli Hi hP f O088 O089 M i REBRANDO b 2020153 56PM
widia.com
K30F K30F K30F-TICN K30F-TICN
K30F-DCF K30F-DCF
grade K30F
uncoated
order # catalogue #
grade K30F
uncoated
order # catalogue #
grade K30F-TiCN
TiCN
order # catalogue #
grade K30F-TiCN
TiCN
order # catalogue # D1 D
length of cut
Ap1 max
length
L BCH
2332125 022801-000090 2332143 022802-000090 2335357 322801-000090 2335379 322802-000090 9,0 10 10,00 66 0,20
2332161 022804-000090 2332177 022806-000090 2335396 322804-000090 2335412 322806-000090 9,0 10 16,00 72 0,20
— 2332144 022802-000100 2335358 322801-000100 2335381 322802-000100 10,0 10 11,00 66 0,30
2332162 022804-000100 2332178 022806-000100 2335397 322804-000100 2335413 322806-000100 10,0 10 19,00 72 0,30
2332127 022801-000120 — 2335360 322801-000120 2335383 322802-000120 12,0 12 12,00 73 0,30
2332163 022804-000120 2332179 022806-000120 2335398 322804-000120 2335415 322806-000120 12,0 12 22,00 83 0,30
— 2332147 022802-000140 2335361 322801-000140 2335384 322802-000140 14,0 14 14,00 75 0,30
2332164 022804-000140 2332180 022806-000140 2335399 322804-000140 2335417 322806-000140 14,0 14 22,00 83 0,30
— — 2335362 322801-000160 2335385 322802-000160 16,0 16 16,00 82 0,40
2332165 022804-000160 2332181 022806-000160 2335400 322804-000160 2335420 322806-000160 16,0 16 26,00 92 0,40
— — 2335363 322801-000180 2335386 322802-000180 18,0 18 18,00 84 0,40
— 2332182 022806-000180 2335401 322804-000180 2335421 322806-000180 18,0 18 26,00 92 0,40
2332131 022801-000200 2332150 022802-000200 2335364 322801-000200 2335387 322802-000200 20,0 20 20,00 92 0,40
2332167 022804-000200 2332183 022806-000200 2335402 322804-000200 2335422 322806-000200 20,0 20 32,00 104 0,40
(continued)
(Series 022801 022804 022802 322806 322801 322804 322802 422806 — continued)
High-Performance Solid Carbide End Mills • Finishing
Series 022801 022804 022802 322806 322801 322804 322802
422806 422801 422804 422802 422806
Series 422801 422804 422802 422806
grade K30F-DCF
TiAlN
order # catalogue #
grade K30F-DCF
TiAlN
order # catalogue # D1 D
length of cut
Ap1 max
length
L BCH
2341532 422801-000020 2341566 422802-000020 2,0 6 3,00 50 0,10
3048490 422804-000020 3048492 422806-000020 2,0 6 6,00 57 0,10
2341534 422801-000025 2341568 422802-000025 2,5 6 3,00 50 0,10
3048491 422804-000025 3048503 422806-000025 2,5 6 7,00 57 0,10
2341536 422801-000030 2341570 422802-000030 3,0 6 4,00 50 0,10
2341603 422804-000030 2341634 422806-000030 3,0 6 7,00 57 0,10
2341538 422801-000035 2341573 422802-000035 3,5 6 4,00 50 0,10
2341606 422804-000035 2341636 422806-000035 3,5 6 7,00 57 0,10
rst choice
alternate choice
Detail X
High-Performance Solid Carbide End Mills
WID_Master16_SolidEndMilling_HighPerformance_O088_O089_Metric_REBRAND.indd 89 10/30/15 2:23 PM
O90
LViWID M 16 S lidE dMilli Hi hP f O090 O091 M i REBRANDO b 20 20154 00PM
widia.com
High-Performance Solid Carbide End Mills
Chamfer Data Corner Chamfer
D1 h10 BCH tolerance
2–6,99 0,1 -0,05
7–9,99 0,2 -0,10
10–15,99 0,3 -0,10
16–20,00 0,4 -0,20
(Series 422801 422804 422802 422806 — continued)
High-Performance Solid Carbide End Mills • Finishing
Series 022801 022804 022802 322806 322801 322804 322802
422806 422801 422804 422802 422806
rst choice
alternate choice
K30F-DCF K30F-DCF
grade K30F-DCF
TiAlN
order # catalogue #
grade K30F-DCF
TiAlN
order # catalogue # D1 D
length of cut
Ap1 max
length
L BCH
2341540 422801-000040 2341575 422802-000040 4,0 6 5,00 54 0,10
2341608 422804-000040 2341638 422806-000040 4,0 6 8,00 57 0,10
2341542 422801-000045 2341577 422802-000045 4,5 6 5,00 54 0,10
2341610 422804-000045 2341640 422806-000045 4,5 6 8,00 57 0,10
2341544 422801-000050 2341579 422802-000050 5,0 6 6,00 54 0,10
2341612 422804-000050 2341642 422806-000050 5,0 6 10,00 57 0,10
2341546 422801-000060 2341581 422802-000060 6,0 6 7,00 54 0,10
2341614 422804-000060 2341644 422806-000060 6,0 6 10,00 57 0,10
2341548 422801-000070 2341583 422802-000070 7,0 8 8,00 58 0,20
2341616 422804-000070 2341646 422806-000070 7,0 8 13,00 63 0,20
2341550 422801-000080 2341587 422802-000080 8,0 8 9,00 58 0,20
2341618 422804-000080 2341648 422806-000080 8,0 8 16,00 63 0,20
2341553 422801-000090 2341589 422802-000090 9,0 10 10,00 66 0,20
2341620 422804-000090 2341650 422806-000090 9,0 10 16,00 72 0,20
2341555 422801-000100 2341591 422802-000100 10,0 10 11,00 66 0,30
2341622 422804-000100 2341653 422806-000100 10,0 10 19,00 72 0,30
2341557 422801-000120 2341593 422802-000120 12,0 12 12,00 73 0,30
2341624 422804-000120 2341657 422806-000120 12,0 12 22,00 83 0,30
2341559 422801-000140 2341595 422802-000140 14,0 14 14,00 75 0,30
2341626 422804-000140 2341659 422806-000140 14,0 14 22,00 83 0,30
2341561 422801-000160 2341597 422802-000160 16,0 16 16,00 82 0,40
2341628 422804-000160 2341661 422806-000160 16,0 16 26,00 92 0,40
2341562 422801-000180 2341599 422802-000180 18,0 18 18,00 84 0,40
2341630 422804-000180 2341663 422806-000180 18,0 18 26,00 92 0,40
2341564 422801-000200 2341601 422802-000200 20,0 20 20,00 92 0,40
2341632 422804-000200 2341665 422806-000200 20,0 20 32,00 104 0,40
Detail X
WID_Master16_SolidEndMilling_HighPerformance_O090_O091_Metric_REBRAND.indd 90 10/30/15 2:23 PM
O91
LViWID M 16 S lidE dMilli Hi hP f O090 O091 M i REBRANDO b 2020154 00PM
widia.com
High-Performance Solid Carbide End Mills
TiAlN-RT
High-Performance Solid Carbide End Mills • Finishing
Series 4603
End Mill Tolerances
D1 tolerance e8 D
tolerance h6
+ / -
) 3 -0,014/-0,028 ) 3 0/-0,006
> 3–6 -0,020/-0,038 > 3–6 0/-0,008
> 6–10 -0,025/-0,047 > 6–10 0/-0,009
> 10–18 -0,032/-0,059 > 10–18 0/-0,011
> 18–30 -0,040/-0,073 > 18–30 0/-0,013
Series 4603
grade TiAlN-RT
TiAlN
order # catalogue # D1 D
length of cut
Ap1 max
length
L
1656750 460303002RT 3,0 6 8,00 57
1656758 460304002RT 4,0 6 11,00 57
1656765 460305002RT 5,0 6 13,00 57
1656773 460306002RT 6,0 6 13,00 57
1656781 460308003RT 8,0 8 19,00 63
1656791 460310004RT 10,0 10 22,00 72
1656799 460312005RT 12,0 12 26,00 83
1656807 460316006RT 16,0 16 32,00 92
1656815 460320007RT 20,0 20 38,00 104
• Centre cutting.
• Standard items listed. Additional
styles and coatings made-to-order.
rst choice
alternate choice
WID_Master16_SolidEndMilling_HighPerformance_O090_O091_Metric_REBRAND.indd 91 10/30/15 2:23 PM
O92
LViWID M 16 S lidE dMilli Hi hP f O092 O093 M i REBRANDO b 20 20154 00PM
widia.com
WP15PE
High-Performance Solid Carbide End Mills • Finishing
Series D507 D517 • Victory™ Grades
Series D507 D517 • Victory Grades
grade WP15PE
AlTiN
order # catalogue # D1 D
length of cut
Ap1 max
length
L
5559100 D50706002W 6,0 6 10,00 54
5559108 D51706002W 6,0 6 13,00 57
5559101 D50708003W 8,0 8 12,00 58
5559109 D51708003W 8,0 8 19,00 63
5559102 D50710004W 10,0 10 14,00 66
5559110 D51710004W 10,0 10 22,00 72
5559103 D50712005W 12,0 12 16,00 73
5559111 D51712005W 12,0 12 26,00 83
5559104 D50714014W 14,0 14 18,00 75
5559112 D51714014W 14,0 14 26,00 83
5559105 D50716006W 16,0 16 22,00 82
5559113 D51716006W 16,0 16 32,00 92
5559106 D50718018W 18,0 18 24,00 84
5559114 D51718018W 18,0 18 32,00 92
5559107 D50720007W 20,0 20 26,00 92
5559115 D51720007W 20,0 20 38,00 104
• Centre cutting.
• Standard items listed. Additional
styles and coatings made-to-order.
rst choice
alternate choice
End Mill Tolerances
D1 tolerance e8 D
tolerance h6
+ / -
) 3 -0,014/-0,028 ) 3 0/-0,006
> 3–6 -0,020/-0,038 > 3–6 0/-0,008
> 6–10 -0,025/-0,047 > 6–10 0/-0,009
> 10–18 -0,032/-0,059 > 10–18 0/-0,011
> 18–30 -0,040/-0,073 > 18–30 0/-0,013
High-Performance Solid Carbide End Mills
WID_Master16_SolidEndMilling_HighPerformance_O092_O093_Metric_REBRAND.indd 92 10/30/15 2:23 PM
O93
LViWID M 16 S lidE dMilli Hi hP f O092 O093 M i REBRANDO b 2020154 00PM
widia.com
K30F-DCHP K30F-DCHP
High-Performance Solid Carbide End Mills • Finishing
Series 422822 422826
End Mill Tolerances
D1
tolerance h10
+ / - D
tolerance h6
+ / -
) 3 0/-0,040 ) 3 0/-0,006
> 3–6 0/-0,048 > 3–6 0/-0,008
> 6–10 0/-0,058 > 6–10 0/-0,009
> 10–18 0/-0,070 > 10–18 0/-0,011
> 18–30 0/-0,084 > 18–30 0/-0,013
Series 422822 422826
grade K30F-DCHP
AlTiN
order # catalogue #
grade K30F-DCHP
AlTiN
order # catalogue # D1 D
length of cut
Ap1 max
length
L BCH ZU
2342270 422822-000060 2342341 422826-000060 6,0 6 13,00 57 0,10 6
2342272 422822-000080 2342343 422826-000080 8,0 8 19,00 63 0,20 6
2342274 422822-000100 2342345 422826-000100 10,0 10 22,00 72 0,30 6
2342276 422822-000120 2342347 422826-000120 12,0 12 26,00 83 0,30 6
2342280 422822-000160 2342351 422826-000160 16,0 16 32,00 92 0,40 6
2342282 422822-000180 2342353 422826-000180 18,0 18 32,00 92 0,40 8
2342284 422822-000200 2342355 422826-000200 20,0 20 38,00 104 0,40 8
2342286 422822-000250 2342357 422826-000250 25,0 25 45,00 121 0,40 8
• Non-centre cutting.
• Standard items listed. Additional
styles and coatings made-to-order.
rst choice
alternate choice
High-Performance Solid Carbide End Mills
Detail X
WID_Master16_SolidEndMilling_HighPerformance_O092_O093_Metric_REBRAND.indd 93 10/30/15 2:23 PM
O94
LViWID M 16 S lidE dMilli Hi hP f O094 O095 M i REBRANDO b 20 20154 00PM
widia.com
K30F - DCHP
High-Performance Solid Carbide End Mills • Finishing
Series 422827
Series 422827
grade K30F-DCHP
AlTiN
order # catalogue # D1 D
length of cut
Ap1 max
length
L BCH ZU
2342360 422827-000060 6,0 6 18,00 62 0,10 6
2342362 422827-000080 8,0 8 24,00 68 0,20 6
2342364 422827-000100 10,0 10 30,00 80 0,30 6
2342366 422827-000120 12,0 12 36,00 93 0,30 6
2342368 422827-000160 16,0 16 48,00 108 0,30 6
2342370 422827-000200 20,0 20 60,00 126 0,40 8
2342372 422827-000250 25,0 25 75,00 150 0,40 8
• Non-centre cutting.
• Standard items listed. Additional
styles and coatings made-to-order.
rst choice
alternate choice
End Mill Tolerances
D1
tolerance h10
+ / - D
tolerance h6
+ / -
) 3 0/-0,040 ) 3 0/-0,006
> 3–6 0/-0,048 > 3–6 0/-0,008
> 6–10 0/-0,058 > 6–10 0/-0,009
> 10–18 0/-0,070 > 10–18 0/-0,011
> 18–30 0/-0,084 > 18–30 0/-0,013
High-Performance Solid Carbide End Mills
WID_Master16_SolidEndMilling_HighPerformance_O094_O095_Metric_REBRAND.indd 94 10/30/15 2:23 PM
O95
LViWID M 16 S lidE dMilli Hi hP f O094 O095 M i REBRANDO b 2020154 00PM
widia.com
WP15PE
High-Performance Solid Carbide End Mills • Finishing
Series D518 • Vision Plus™ • Victory™ Grades
End Mill Tolerances
D1 tolerance e8 D
tolerance h6
+ / -
) 3 -0,014/-0,028 ) 3 0/-0,006
> 3–6 -0,020/-0,038 > 3–6 0/-0,008
> 6–10 -0,025/-0,047 > 6–10 0/-0,009
> 10–18 -0,032/-0,059 > 10–18 0/-0,011
> 18–30 -0,040/-0,073 > 18–30 0/-0,013
Series D518 • Vision Plus • Victory Grades
grade WP15PE
AlTiN
order # catalogue # D1 D
length of cut
Ap1 max
length
LZU
5559116 D51804002W 4,0 6 11,00 57 4
5559117 D51805002W 5,0 6 13,00 57 4
5559118 D51806002W 6,0 6 13,00 57 6
5559119 D51807003W 7,0 8 16,00 63 6
5559120 D51808003W 8,0 8 19,00 63 6
5559121 D51809004W 9,0 10 19,00 72 6
5559122 D51810004W 10,0 10 22,00 72 6
5559123 D51812005W 12,0 12 26,00 83 6
5559124 D51814014W 14,0 14 26,00 83 6
5559125 D51816006W 16,0 16 32,00 92 8
5559126 D51818018W 18,0 18 32,00 92 8
5559127 D51820007W 20,0 20 38,00 104 8
5559128 D51825008W 25,0 25 45,00 121 8
• Centre cutting.
• Standard items listed. Additional
styles and coatings made-to-order.
rst choice
alternate choice
High-Performance Solid Carbide End Mills
WID_Master16_SolidEndMilling_HighPerformance_O094_O095_Metric_REBRAND.indd 95 10/30/15 2:23 PM
O96
LViWID M 16 S lidE dMilli Hi hP f O096 O097 M i REBRANDO b 20 20154 00PM
widia.com
UNCOATED
High-Performance Solid Carbide End Mills • Finishing
Series 026621 • Cermet End Mill
Series 026621 • Cermet End Mill
grade UNCOATED
order # catalogue # D1 D
length of cut
Ap1 max
length
L BCH ZU
2333138 026621-000080 8,0 8 19,00 63 0,20 4
2333140 026621-000120 12,0 12 26,00 83 0,30 6
2333143 026621-000160 16,0 16 32,00 92 0,40 8
2333145 026621-000200 20,0 20 38,00 104 0,40 8
• Non-centre cutting.
• Standard items listed. Additional
styles and coatings made-to-order.
rst choice
alternate choice
End Mill Tolerances
D1
tolerance h10
+ / - D
tolerance h6
+ / -
) 3 0/-0,040 ) 3 0/-0,006
> 3–6 0/-0,048 > 3–6 0/-0,008
> 6–10 0/-0,058 > 6–10 0/-0,009
> 10–18 0/-0,070 > 10–18 0/-0,011
> 18–30 0/-0,084 > 18–30 0/-0,013
High-Performance Solid Carbide End Mills
Detail X
WID_Master16_SolidEndMilling_HighPerformance_O096_O097_Metric_REBRAND.indd 96 10/30/15 2:23 PM
O97
LViWID M 16 S lidE dMilli Hi hP f O096 O097 M i REBRANDO b 2020154 00PM
widia.com
K10F-DIA
High-Performance Solid Carbide End Mills • Finishing
Series 024112
End Mill Tolerances
D1
tolerance h10
+ / - D
tolerance h6
+ / -
) 3 0/-0,040 ) 3 0/-0,006
> 3–6 0/-0,048 > 3–6 0/-0,008
> 6–10 0/-0,058 > 6–10 0/-0,009
> 10–18 0/-0,070 > 10–18 0/-0,011
> 18–30 0/-0,084 > 18–30 0/-0,013
Series 024112
grade K10F-DIA
DIAMOND
order # catalogue # D1 D D3
length of cut
Ap1 max L3
length
LR¡
2333112 024112-006005 6,0 6 5,80 6,00 42,00 80 0,50
2333113 024112-008010 8,0 8 7,80 8,00 50,00 90 1,00
2333114 024112-010020 10,0 10 9,70 10,00 56,00 100 2,00
L3
D1
RεAp1 max
L
D3
D
* 5mm
• Centre cutting.
• Standard items listed. Additional
styles and coatings made-to-order.
rst choice
alternate choice
High-Performance Solid Carbide End Mills
WID_Master16_SolidEndMilling_HighPerformance_O096_O097_Metric_REBRAND.indd 97 10/30/15 2:23 PM
O98
LViWID M 16 S lidE dMilli Hi hP f O098 O099 M i REBRANDD b 14 201511 43AM
widia.com
K10F-DIA
High-Performance Solid Carbide End Mills • Finishing
Series 024111
Series 024111
grade K10F-DIA
DIAMOND
order # catalogue # D1 D D3
length of cut
Ap1 max L3
length
L
2333099 024111-000020 2,0 6 1,90 2,00 17,50 70
2333100 024111-000030 3,0 6 2,90 3,00 18,50 70
2333101 024111-000040 4,0 6 3,80 4,00 19,50 80
2333102 024111-000050 5,0 6 4,80 5,00 39,00 80
2333103 024111-000060 6,0 6 5,80 6,00 42,00 80
2333104 024111-000080 8,0 8 7,80 8,00 52,00 90
2333105 024111-000100 10,0 10 9,70 10,00 58,00 100
2333106 024111-000120 12,0 12 11,70 12,00 63,00 110
> 5mm
• Centre cutting.
• Standard items listed. Additional
styles and coatings made-to-order.
rst choice
alternate choice
End Mill Tolerances
D1
tolerance h10
+ / - D
tolerance h6
+ / -
) 3 0/-0,040 ) 3 0/-0,006
> 3–6 0/-0,048 > 3–6 0/-0,008
> 6–10 0/-0,058 > 6–10 0/-0,009
> 10–18 0/-0,070 > 10–18 0/-0,011
> 18–30 0/-0,084 > 18–30 0/-0,013
High-Performance Solid Carbide End Mills
WID_Master16_SolidEndMilling_HighPerformance_O098_O099_Metric_REBRAND.indd 98 12/14/15 11:46 AM
O99
LViWID M 16 S lidE dMilli Hi hP f O098 O099 M i REBRANDD b 14201511 43AM
widia.com
High-Performance Solid Carbide End Mills • Finishing
Application Data • Series 4001 JJ • JIS • Victory™ Grades
High-Performance Solid Carbide End Mills
Series 4001 JJ • Victory Grades
Material
Group
Side Milling (A)
and Slotting (B) WP15PE Recommended feed per tooth (fz = mm/th) for side milling (A).
For slotting (B), reduce fz by 20%.
AB
Cutting Speed
— vc
m/min
D1 — Diameter
ap ae ap min max mm 2,0 3,0 4,0 5,0 6,0 8,0 10,0 12,0 14,0 16,0 18,0 20,0 25,0
P
01,25 x D 0,25 x D 0,5 x D 150 – 200 fz 0,012 0,019 0,026 0,032 0,039 0,054 0,065 0,075 0,083 0,091 0,097 0,103 0,111
11,25 x D 0,25 x D 0,5 x D 150 – 200 fz 0,012 0,019 0,026 0,032 0,039 0,054 0,065 0,075 0,083 0,091 0,097 0,103 0,111
21,25 x D 0,25 x D 0,5 x D 140 – 190 fz 0,012 0,019 0,026 0,032 0,039 0,054 0,065 0,075 0,083 0,091 0,097 0,103 0,111
31,25 x D 0,25 x D 0,5 x D 120 – 160 fz 0,010 0,016 0,021 0,027 0,033 0,045 0,054 0,063 0,071 0,078 0,085 0,091 0,102
41,25 x D 0,25 x D 0,3 x D 90 – 150 fz 0,009 0,014 0,019 0,024 0,030 0,040 0,049 0,056 0,063 0,069 0,075 0,079 0,088
M11,25 x D 0,25 x D 0,5 x D 90 – 115 fz 0,010 0,016 0,021 0,027 0,033 0,045 0,054 0,063 0,071 0,078 0,085 0,091 0,102
21,25 x D 0,25 x D 0,5 x D 60 – 80 fz 0,008 0,013 0,017 0,022 0,026 0,036 0,044 0,051 0,057 0,063 0,068 0,073 0,082
K11,25 x D 0,25 x D 0,5 x D 120 – 150 fz 0,012 0,019 0,026 0,032 0,039 0,054 0,065 0,075 0,083 0,091 0,097 0,103 0,111
21,25 x D 0,25 x D 0,5 x D 110 – 140 fz 0,010 0,016 0,021 0,027 0,033 0,045 0,054 0,063 0,071 0,078 0,085 0,091 0,102
N
11,25 x D 0,25 x D 0,5 x D 500 – 2000 fz 0,018 0,027 0,036 0,045 0,054 0,072 0,090 0,108 0,126 0,144 0,162 0,180 0,225
21,25 x D 0,25 x D 0,5 x D 500 – 1500 fz 0,016 0,024 0,032 0,041 0,049 0,065 0,081 0,097 0,113 0,130 0,146 0,162 0,203
31,25 x D 0,25 x D 0,5 x D 250 – 1000 fz 0,016 0,024 0,032 0,041 0,049 0,065 0,081 0,097 0,113 0,130 0,146 0,162 0,203
41,25 x D 0,25 x D 0,5 x D 100 – 750 fz 0,018 0,027 0,036 0,045 0,054 0,072 0,090 0,108 0,126 0,144 0,162 0,180 0,225
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group.
Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on >12mm diameters.
WID_Master16_SolidEndMilling_HighPerformance_O098_O099_Metric_REBRAND.indd 99 12/14/15 11:46 AM
O100
LViWID M 16 S lidE dMilli Hi hP f O100 O101 M i REBRANDO b 20 20153 59PM
widia.com
High-Performance Solid Carbide End Mills • Finishing
Application Data • Series D503
High-Performance Solid Carbide End Mills
Series D503
Material
Group
Side Milling (A)
and Slotting (B) uncoated TiAlN Recommended feed per tooth (fz = mm/th) for side milling (A).
For slotting (B), reduce fz by 20%.
AB
Cutting Speed
— vc
m/min
Cutting Speed
— vc
m/min
D1 — Diameter
ap ae ap min max min max mm 2,0 3,0 4,0 5,0 6,0 8,0 10,0 12,0 14,0 16,0 18,0 20,0
P
00,75 x D 0,4 x D 0,5 x D 60 – 80 150 – 200 fz 0,014 0,021 0,028 0,036 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114
10,75 x D 0,4 x D 0,5 x D 60 – 80 150 – 200 fz 0,014 0,021 0,028 0,036 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114
20,75 x D 0,4 x D 0,5 x D 56 – 76 140 – 190 fz 0,014 0,021 0,028 0,036 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114
30,75 x D 0,4 x D 0,5 x D 48 – 64 120 – 160 fz 0,011 0,017 0,023 0,030 0,036 0,050 0,061 0,070 0,079 0,087 0,095 0,101
40,75 x D 0,4 x D 0,3 x D – – – 90 – 150 fz 0,010 0,016 0,021 0,027 0,033 0,045 0,054 0,062 0,070 0,077 0,083 0,088
50,75 x D 0,4 x D 0,5 x D – – – 60 – 100 fz 0,009 0,014 0,019 0,024 0,029 0,040 0,048 0,056 0,063 0,070 0,076 0,081
60,75 x D 0,4 x D 0,3 x D – – – 50 – 75 fz 0,008 0,012 0,016 0,020 0,025 0,034 0,040 0,047 0,052 0,057 0,061 0,065
M
10,75 x D 0,4 x D 0,5 x D 36 – 46 90 – 115 fz 0,011 0,017 0,023 0,030 0,036 0,050 0,061 0,070 0,079 0,087 0,095 0,101
20,75 x D 0,4 x D 0,5 x D – – – 60 – 80 fz 0,009 0,014 0,019 0,024 0,029 0,040 0,048 0,056 0,063 0,070 0,076 0,081
30,75 x D 0,4 x D 0,5 x D – – – 60 – 70 fz 0,008 0,012 0,016 0,020 0,025 0,034 0,040 0,047 0,052 0,057 0,061 0,065
K
10,75 x D 0,4 x D 0,5 x D 48 – 60 120 – 150 fz 0,014 0,021 0,028 0,036 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114
20,75 x D 0,4 x D 0,5 x D – – – 110 – 140 fz 0,011 0,017 0,023 0,030 0,036 0,050 0,061 0,070 0,079 0,087 0,095 0,101
30,75 x D 0,4 x D 0,5 x D – – – 110 – 130 fz 0,009 0,014 0,019 0,024 0,029 0,040 0,048 0,056 0,063 0,070 0,076 0,081
S
10,75 x D 0,4 x D 0,3 x D – – – 50 – 90 fz 0,011 0,017 0,023 0,030 0,036 0,050 0,061 0,070 0,079 0,087 0,095 0,101
20,75 x D 0,4 x D 0,3 x D – – – 25 – 40 fz 0,006 0,009 0,013 0,016 0,019 0,026 0,032 0,037 0,042 0,046 0,050 0,054
30,75 x D 0,4 x D 0,3 x D – – – 60 – 80 fz 0,009 0,014 0,019 0,024 0,029 0,040 0,048 0,056 0,063 0,070 0,076 0,081
40,75 x D 0,4 x D 0,5 x D – – – 50 – 60 fz 0,007 0,011 0,016 0,021 0,026 0,037 0,045 0,052 0,058 0,064 0,069 0,074
H10,75 x D 0,4 x D 0,3 x D – – – 80 – 140 fz 0,010 0,016 0,021 0,027 0,033 0,045 0,054 0,062 0,070 0,077 0,083 0,088
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group.
Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on >12mm diameters.
WID_Master16_SolidEndMilling_HighPerformance_O100_O101_Metric_REBRAND.indd 100 10/30/15 2:24 PM
O101
LViWID M 16 S lidE dMilli Hi hP f O100 O101 M i REBRANDO b 2020153 59PM
widia.com
Series D513
Material
Group
Side Milling (A)
and Slotting (B) uncoated TiAlN Recommended feed per tooth (fz = mm/th) for side milling (A).
For slotting (B), reduce fz by 20%.
AB
Cutting
Speed — vc
m/min
Cutting
Speed — vc
m/min
D1 — Diameter
ap ae ap min max min max mm 2,0 3,0 4,0 5,0 6,0 8,0 10,0 12,0 14,0 16,0 18,0 20,0
P
01,25 x D 0,2 x D 0,25 x D 60 – 80 150 – 200 fz 0,014 0,021 0,028 0,036 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114
11,25 x D 0,2 x D 0,25 x D 60 – 80 150 – 200 fz 0,014 0,021 0,028 0,036 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114
21,25 x D 0,2 x D 0,25 x D 56 – 76 140 – 190 fz 0,014 0,021 0,028 0,036 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114
31,25 x D 0,2 x D 0,25 x D 48 – 64 120 – 160 fz 0,011 0,017 0,023 0,030 0,036 0,050 0,061 0,070 0,079 0,087 0,095 0,101
41,25 x D 0,2 x D 0,25 x D – – – 90 – 150 fz 0,010 0,016 0,021 0,027 0,033 0,045 0,054 0,062 0,070 0,077 0,083 0,088
51,25 x D 0,2 x D 0,25 x D – – – 60 – 100 fz 0,009 0,014 0,019 0,024 0,029 0,040 0,048 0,056 0,063 0,070 0,076 0,081
61,25 x D 0,2 x D 0,25 x D – – – 50 – 75 fz 0,008 0,012 0,016 0,020 0,025 0,034 0,040 0,047 0,052 0,057 0,061 0,065
M
11,25 x D 0,2 x D 0,25 x D 36 – 46 90 – 115 fz 0,011 0,017 0,023 0,030 0,036 0,050 0,061 0,070 0,079 0,087 0,095 0,101
21,25 x D 0,2 x D 0,25 x D – – – 60 – 80 fz 0,009 0,014 0,019 0,024 0,029 0,040 0,048 0,056 0,063 0,070 0,076 0,081
31,25 x D 0,2 x D 0,25 x D – – – 60 – 70 fz 0,008 0,012 0,016 0,020 0,025 0,034 0,040 0,047 0,052 0,057 0,061 0,065
K
11,25 x D 0,2 x D 0,25 x D 48 – 60 120 – 150 fz 0,014 0,021 0,028 0,036 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114
21,25 x D 0,2 x D 0,25 x D – – – 110 – 140 fz 0,011 0,017 0,023 0,030 0,036 0,050 0,061 0,070 0,079 0,087 0,095 0,101
31,25 x D 0,2 x D 0,25 x D – – – 110 – 130 fz 0,009 0,014 0,019 0,024 0,029 0,040 0,048 0,056 0,063 0,070 0,076 0,081
S
11,25 x D 0,2 x D 0,25 x D – – – 50 – 90 fz 0,011 0,017 0,023 0,030 0,036 0,050 0,061 0,070 0,079 0,087 0,095 0,101
21,25 x D 0,2 x D 0,25 x D – – – 25 – 40 fz 0,006 0,009 0,013 0,016 0,019 0,026 0,032 0,037 0,042 0,046 0,050 0,054
31,25 x D 0,2 x D 0,25 x D – – – 60 – 80 fz 0,009 0,014 0,019 0,024 0,029 0,040 0,048 0,056 0,063 0,070 0,076 0,081
41,25 x D 0,2 x D 0,25 x D – – – 50 – 60 fz 0,007 0,011 0,016 0,021 0,026 0,037 0,045 0,052 0,058 0,064 0,069 0,074
H11,25 x D 0,2 X D 0,25 x D – – – 80 – 140 fz 0,010 0,016 0,021 0,027 0,033 0,045 0,054 0,062 0,070 0,077 0,083 0,088
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group.
Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on >12mm diameters.
High-Performance Solid Carbide End Mills • Finishing
Application Data • Series D513
High-Performance Solid Carbide End Mills
WID_Master16_SolidEndMilling_HighPerformance_O100_O101_Metric_REBRAND.indd 101 10/30/15 2:24 PM
O102
LViWID M 16 S lidE dMilli Hi hP f O102 O103 M i REBRANDO b 20 20153 59PM
widia.com
High-Performance Solid Carbide End Mills • Finishing
Application Data • Series DC03
High-Performance Solid Carbide End Mills
Series DC03
Material
Group
Side Milling (A)
and Slotting (B) TiAlN Recommended feed per tooth (fz = mm/th) for side milling (A).
For slotting (B), reduce fz by 20%.
AB
Cutting Speed
— vc
m/min
D1 — Diameter
ap ae ap min max mm 3,0 4,0 5,0 6,0 8,0 10,0 12,0 14,0 16,0 18,0 20,0
P
00,75 x D 0,4 x D 0,5 x D 150 – 200 fz 0,021 0,028 0,028 0,028 0,028 0,044 0,060 0,072 0,083 0,101 0,114
10,75 x D 0,4 x D 0,5 x D 150 – 200 fz 0,021 0,028 0,028 0,028 0,028 0,044 0,060 0,072 0,083 0,101 0,114
20,75 x D 0,4 x D 0,5 x D 140 – 190 fz 0,018 0,023 0,023 0,023 0,023 0,036 0,050 0,061 0,070 0,087 0,101
30,75 x D 0,4 x D 0,5 x D 120 – 160 fz 0,016 0,021 0,021 0,021 0,021 0,033 0,045 0,054 0,062 0,077 0,088
40,75 x D 0,4 x D 0,3 x D 90 – 150 fz 0,014 0,019 0,019 0,019 0,019 0,029 0,040 0,048 0,056 0,070 0,081
50,75 x D 0,4 x D 0,5 x D 60 – 100 fz 0,014 0,019 0,019 0,019 0,019 0,029 0,040 0,048 0,056 0,070 0,081
60,75 x D 0,4 x D 0,3 x D 50 – 75 fz 0,012 0,016 0,016 0,016 0,016 0,025 0,034 0,040 0,047 0,057 0,065
M
10,75 x D 0,4 x D 0,5 x D 90 – 115 fz 0,018 0,023 0,023 0,023 0,023 0,036 0,050 0,061 0,070 0,087 0,101
20,75 x D 0,4 x D 0,5 x D 60 – 80 fz 0,014 0,019 0,019 0,019 0,019 0,029 0,040 0,048 0,056 0,070 0,081
30,75 x D 0,4 x D 0,5 x D 60 – 70 fz 0,012 0,016 0,016 0,016 0,016 0,025 0,034 0,040 0,047 0,057 0,065
K
10,75 x D 0,4 x D 0,5 x D 120 – 150 fz 0,021 0,028 0,028 0,028 0,028 0,044 0,060 0,072 0,083 0,101 0,114
20,75 x D 0,4 x D 0,5 x D 110 – 140 fz 0,018 0,023 0,023 0,023 0,023 0,036 0,050 0,061 0,070 0,087 0,101
30,75 x D 0,4 x D 0,5 x D 110 – 130 fz 0,014 0,019 0,019 0,019 0,019 0,029 0,040 0,048 0,056 0,070 0,081
S
10,75 x D 0,4 x D 0,3 x D 50 – 90 fz 0,018 0,023 0,023 0,023 0,023 0,036 0,050 0,061 0,070 0,087 0,101
20,75 x D 0,4 x D 0,3 x D 25 – 40 fz 0,010 0,013 0,013 0,013 0,013 0,019 0,026 0,032 0,037 0,046 0,054
30,75 x D 0,4 x D 0,3 x D 60 – 80 fz 0,014 0,019 0,019 0,019 0,019 0,029 0,040 0,048 0,056 0,070 0,081
40,75 x D 0,4 x D 0,5 x D 50 – 60 fz 0,012 0,016 0,016 0,016 0,016 0,026 0,037 0,045 0,052 0,064 0,074
H10,75 x D 0,4 x D 0,3 x D 80 – 140 fz 0,016 0,021 0,021 0,021 0,021 0,033 0,045 0,054 0,062 0,077 0,088
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group.
Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on >12mm diameters.
WID_Master16_SolidEndMilling_HighPerformance_O102_O103_Metric_REBRAND.indd 102 10/30/15 2:24 PM
O103
LViWID M 16 S lidE dMilli Hi hP f O102 O103 M i REBRANDO b 2020153 59PM
widia.com
High-Performance Solid Carbide End Mills • Finishing
Application Data • Series 4503 JJ • JIS • Victory™ Grades
High-Performance Solid Carbide End Mills
Series 4503 JJ • Victory Grades
Material
Group
Side Milling (A)
and Slotting (B) WP15PE Recommended feed per tooth (fz = mm/th) for side milling (A).
For slotting (B), reduce fz by 20%.
AB
Cutting
Speed — vc
m/min
D1 — Diameter
ap ae ap min max mm 1,0 1,5 2,0 2,5 3,0 3,5 4,0 4,5 5,0 6,0 8,0 10,0 12,0 16,0 18,0 20,0
P
01,5 x D 0,3 x D 0,5 x D 150 – 200 fz 0,007 0,010 0,014 0,017 0,021 0,025 0,028 0,032 0,036 0,044 0,060 0,072 0,083 0,101 0,108 0,114
11,5 x D 0,3 x D 0,5 x D 150 – 200 fz 0,007 0,010 0,014 0,017 0,021 0,025 0,028 0,032 0,036 0,044 0,060 0,072 0,083 0,101 0,108 0,114
21,5 x D 0,3 x D 0,5 x D 140 – 190 fz 0,007 0,010 0,014 0,017 0,021 0,025 0,028 0,032 0,036 0,044 0,060 0,072 0,083 0,101 0,108 0,114
31,5 x D 0,3 x D 0,5 x D 120 – 160 fz 0,006 0,008 0,011 0,014 0,017 0,020 0,023 0,027 0,030 0,036 0,050 0,061 0,070 0,087 0,095 0,101
41,5 x D 0,3 x D 0,3 x D 90 – 150 fz 0,005 0,008 0,010 0,013 0,016 0,019 0,021 0,024 0,027 0,033 0,045 0,054 0,062 0,077 0,083 0,088
51,5 x D 0,3 x D 0,5 x D 60 – 100 fz 0,005 0,007 0,009 0,012 0,014 0,017 0,019 0,022 0,024 0,029 0,040 0,048 0,056 0,070 0,076 0,081
61,5 x D 0,3 x D 0,3 x D 50 – 75 fz 0,004 0,006 0,008 0,010 0,012 0,014 0,016 0,018 0,020 0,025 0,034 0,040 0,047 0,057 0,061 0,065
M
11,5 x D 0,3 x D 0,5 x D 90 – 115 fz 0,006 0,008 0,011 0,014 0,017 0,020 0,023 0,027 0,030 0,036 0,050 0,061 0,070 0,087 0,095 0,101
21,5 x D 0,3 x D 0,5 x D 60 – 80 fz 0,005 0,007 0,009 0,012 0,014 0,017 0,019 0,022 0,024 0,029 0,040 0,048 0,056 0,070 0,076 0,081
31,5 x D 0,3 x D 0,5 x D 60 – 70 fz 0,004 0,006 0,008 0,010 0,012 0,014 0,016 0,018 0,020 0,025 0,034 0,040 0,047 0,057 0,061 0,065
K
11,5 x D 0,3 x D 0,5 x D 120 – 150 fz 0,007 0,010 0,014 0,017 0,021 0,025 0,028 0,032 0,036 0,044 0,060 0,072 0,083 0,101 0,108 0,114
21,5 x D 0,3 x D 0,5 x D 110 – 140 fz 0,006 0,008 0,011 0,014 0,017 0,020 0,023 0,027 0,030 0,036 0,050 0,061 0,070 0,087 0,095 0,101
31,5 x D 0,3 x D 0,5 x D 110 – 130 fz 0,005 0,007 0,009 0,012 0,014 0,017 0,019 0,022 0,024 0,029 0,040 0,048 0,056 0,070 0,076 0,081
S
11,5 x D 0,3 x D 0,3 x D 50 – 90 fz 0,006 0,008 0,011 0,014 0,017 0,020 0,023 0,027 0,030 0,036 0,050 0,061 0,070 0,087 0,095 0,101
21,5 x D 0,3 x D 0,3 x D 25 – 40 fz 0,003 0,005 0,006 0,008 0,009 0,011 0,013 0,014 0,016 0,019 0,026 0,032 0,037 0,046 0,050 0,054
31,5 x D 0,3 x D 0,5 x D 60 – 80 fz 0,005 0,007 0,009 0,012 0,014 0,017 0,019 0,022 0,024 0,029 0,040 0,048 0,056 0,070 0,076 0,081
41,5 x D 0,3 x D 0,5 x D 50 – 60 fz 0,003 0,005 0,007 0,009 0,011 0,014 0,016 0,018 0,021 0,026 0,037 0,045 0,052 0,064 0,069 0,074
H11,5 x D 0,3 x D 0,3 x D 80 – 140 fz 0,005 0,008 0,010 0,013 0,016 0,019 0,021 0,024 0,027 0,033 0,045 0,054 0,062 0,077 0,083 0,088
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group.
Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on >12mm diameters.
WID_Master16_SolidEndMilling_HighPerformance_O102_O103_Metric_REBRAND.indd 103 10/30/15 2:24 PM
O104
LViWID M 16 S lidE dMilli Hi hP f O104 O105 M i REBRANDN b 10 201512 50PM
widia.com
High-Performance Solid Carbide End Mills • Finishing
Application Data • Series 022801 022804 322801 322804 422801 022806 022802
322806 322802 422802
High-Performance Solid Carbide End Mills
Series 022801 022804 322801 322804 422801 022806 022802 322806 322802 422802
Material
Group
Side Milling (A)
and Slotting (B)
K30F K30F-TICN K30F-DCF
uncoated TiCN TiAlN Recommended feed per tooth (fz = mm/th) for side milling (A).
For slotting (B), reduce fz by 20%.
AB
Cutting
Speed — vc
m/min
Cutting
Speed — vc
m/min
Cutting
Speed — vc
m/min
D1 — Diameter
ap ae ap min max min max min max mm 2,0 3,0 4,0 5,0 6,0 7,0 8,0 9,0 10,0 12,0 16,0 18,0 20,0
P
0
0,75 x D 0,4 x D 0,5 x D 60 – 80 120 – 160 150 – 200 fz 0,011 0,017 0,023 0,029 0,035 0,041 0,048 0,053 0,058 0,066 0,081 0,086 0,091
1
0,75 x D 0,4 x D 0,5 x D 60 – 80 120 – 160 150 – 200 fz 0,011 0,017 0,023 0,029 0,035 0,041 0,048 0,053 0,058 0,066 0,081 0,086 0,091
2
0,75 x D 0,4 x D 0,5 x D 56 – 76 112 – 152 140 – 190 fz 0,011 0,017 0,023 0,029 0,035 0,041 0,048 0,053 0,058 0,066 0,081 0,086 0,091
3
0,75 x D 0,4 x D 0,5 x D 48 – 64 96 – 128 120 – 160 fz 0,009 0,014 0,019 0,024 0,029 0,034 0,040 0,044 0,048 0,056 0,070 0,076 0,081
4
0,75 x D 0,4 x D 0,3 x D – – – 72 – 120 90 – 150 fz 0,008 0,013 0,017 0,022 0,026 0,031 0,036 0,040 0,043 0,050 0,061 0,066 0,070
5
0,75 x D 0,4 x D 0,5 x D – – – 48 – 80 60 – 100 fz 0,008 0,011 0,015 0,019 0,024 0,028 0,032 0,035 0,039 0,045 0,056 0,060 0,065
6
0,75 x D 0,4 x D 0,3 x D – – – 40 – 60 50 – 75 fz 0,006 0,010 0,013 0,016 0,020 0,023 0,027 0,030 0,032 0,037 0,046 0,049 0,052
M
1
0,75 x D 0,4 x D 0,5 x D 36 – 46 72 – 92 90 – 115 fz 0,009 0,014 0,019 0,024 0,029 0,034 0,040 0,044 0,048 0,056 0,070 0,076 0,081
2
0,75 x D 0,4 x D 0,5 x D – – – 48 – 64 60 – 80 fz 0,008 0,011 0,015 0,019 0,024 0,028 0,032 0,035 0,039 0,045 0,056 0,060 0,065
3
0,75 x D 0,4 x D 0,5 x D – – – 48 – 56 60 – 70 fz 0,006 0,010 0,013 0,016 0,020 0,023 0,027 0,030 0,032 0,037 0,046 0,049 0,052
K
1
0,75 x D 0,4 x D 0,5 x D 48 – 60 96 – 120 120 – 150 fz 0,011 0,017 0,023 0,029 0,035 0,041 0,048 0,053 0,058 0,066 0,081 0,086 0,091
2
0,75 x D 0,4 x D 0,5 x D – – – 88 – 112 110 – 140 fz 0,009 0,014 0,019 0,024 0,029 0,034 0,040 0,044 0,048 0,056 0,070 0,076 0,081
3
0,75 x D 0,4 x D 0,5 x D – – – 88 – 104 110 – 130 fz 0,008 0,011 0,015 0,019 0,024 0,028 0,032 0,035 0,039 0,045 0,056 0,060 0,065
S
1
0,75 x D 0,4 x D 0,3 x D – – – 40 – 72 50 – 90 fz 0,009 0,014 0,019 0,024 0,029 0,034 0,040 0,044 0,048 0,056 0,070 0,076 0,081
2
0,75 x D 0,4 x D 0,3 x D – – – 20 – 32 25 – 40 fz 0,005 0,008 0,010 0,013 0,016 0,018 0,021 0,023 0,026 0,030 0,037 0,040 0,043
3
0,75 x D 0,4 x D 0,3 x D – – – 48 – 64 60 – 80 fz 0,008 0,011 0,015 0,019 0,024 0,028 0,032 0,035 0,039 0,045 0,056 0,060 0,065
4
0,75 x D 0,4 x D 0,5 x D – – – 40 – 48 50 – 60 fz 0,006 0,009 0,013 0,016 0,021 0,025 0,029 0,033 0,036 0,041 0,051 0,056 0,059
H1
0,75 x D 0,4 x D 0,3 x D – – – 64 – 112 80 – 140 fz 0,008 0,013 0,017 0,022 0,026 0,031 0,036 0,040 0,043 0,050 0,061 0,066 0,070
Material
Group
Side Milling (A)
and Slotting (B)
K30F K30F-TICN K30F-DCF
uncoated TiCN TiAlN Recommended feed per tooth (fz = mm/th) for side milling (A).
For slotting (B), reduce fz by 20%.
AB
Cutting
Speed — vc
m/min
Cutting
Speed — vc
m/min
Cutting
Speed — vc
m/min
D1 — Diameter
ap ae ap min max min max min max mm 2,0 3,0 4,0 5,0 6,0 8,0 10,0 12,0 16,0 18,0 20,0
P
0
1,5 x D 0,3 x D 0,5 x D 60 – 80 120 – 160 150 – 200 fz 0,011 0,017 0,023 0,029 0,035 0,048 0,058 0,066 0,081 0,086 0,091
1
1,5 x D 0,3 x D 0,5 x D 60 – 80 120 – 160 150 – 200 fz 0,011 0,017 0,023 0,029 0,035 0,048 0,058 0,066 0,081 0,086 0,091
2
1,5 x D 0,3 x D 0,5 x D 56 – 76 112 – 152 140 – 190 fz 0,011 0,017 0,023 0,029 0,035 0,048 0,058 0,066 0,081 0,086 0,091
3
1,5 x D 0,3 x D 0,5 x D 48 – 64 96 – 128 120 – 160 fz 0,009 0,014 0,019 0,024 0,029 0,040 0,048 0,056 0,070 0,076 0,081
4
1,5 x D 0,3 x D 0,3 x D – – – 72 – 120 90 – 150 fz 0,008 0,013 0,017 0,022 0,026 0,036 0,043 0,050 0,061 0,066 0,070
5
1,5 x D 0,3 x D 0,5 x D – – – 48 – 80 60 – 100 fz 0,008 0,011 0,015 0,019 0,024 0,032 0,039 0,045 0,056 0,060 0,065
6
1,5 x D 0,3 x D 0,3 x D – – – 40 – 60 50 – 75 fz 0,006 0,010 0,013 0,016 0,020 0,027 0,032 0,037 0,046 0,049 0,052
M
1
1,5 x D 0,3 x D 0,5 x D 36 – 46 72 – 92 90 – 115 fz 0,009 0,014 0,019 0,024 0,029 0,040 0,048 0,056 0,070 0,076 0,081
2
1,5 x D 0,3 x D 0,5 x D – – – 48 – 64 60 – 80 fz 0,008 0,011 0,015 0,019 0,024 0,032 0,039 0,045 0,056 0,060 0,065
3
1,5 x D 0,3 x D 0,5 x D – – – 48 – 56 60 – 70 fz 0,006 0,010 0,013 0,016 0,020 0,027 0,032 0,037 0,046 0,049 0,052
K
1
1,5 x D 0,3 x D 0,5 x D 48 – 60 96 – 120 120 – 150 fz 0,011 0,017 0,023 0,029 0,035 0,048 0,058 0,066 0,081 0,086 0,091
2
1,5 x D 0,3 x D 0,5 x D – – – 88 – 112 110 – 140 fz 0,009 0,014 0,019 0,024 0,029 0,040 0,048 0,056 0,070 0,076 0,081
3
1,5 x D 0,3 x D 0,5 x D – – – 88 – 104 110 – 130 fz 0,008 0,011 0,015 0,019 0,024 0,032 0,039 0,045 0,056 0,060 0,065
S
1
1,5 x D 0,3 x D 0,3 x D – – – 40 – 72 50 – 90 fz 0,009 0,014 0,019 0,024 0,029 0,040 0,048 0,056 0,070 0,076 0,081
2
1,5 x D 0,3 x D 0,3 x D – – – 20 – 32 25 – 40 fz 0,005 0,008 0,010 0,013 0,016 0,021 0,026 0,030 0,037 0,040 0,043
3
1,5 x D 0,3 x D 0,3 x D – – – 48 – 64 60 – 80 fz 0,008 0,011 0,015 0,019 0,024 0,032 0,039 0,045 0,056 0,060 0,065
4
1,5 x D 0,3 x D 0,5 x D – – – 40 – 48 50 – 60 fz 0,006 0,009 0,013 0,016 0,021 0,029 0,036 0,041 0,051 0,056 0,059
H1
1,5 x D 0,3 x D 0,3 x D – – – 80 – 140 80 – 140 fz 0,008 0,013 0,017 0,022 0,026 0,036 0,043 0,050 0,061 0,066 0,070
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group.
Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on >12mm diameters.
WID_Master16_SolidEndMilling_HighPerformance_O104_O105_Metric_REBRAND.indd 104 11/10/15 2:19 PM
O105
LViWID M 16 S lidE dMilli Hi hP f O104 O105 M i REBRANDN b 10201512 50PM
widia.com
High-Performance Solid Carbide End Mills • Finishing
Application Data • Series 4603
High-Performance Solid Carbide End Mills
Series 4603
Material
Group
Side Milling (A)
and Slotting (B) TiAlN Recommended feed per tooth (fz = mm/th) for side milling (A).
For slotting (B), reduce fz by 20%.
AB
Cutting Speed
— vc
m/min
D1 — Diameter
ap ae ap min max mm 3,0 4,0 5,0 6,0 8,0 10,0 12,0 16,0 18,0 20,0
P
0
1,5 x D 0,3 x D 0,5 x D 150 – 200 fz 0,017 0,023 0,029 0,035 0,048 0,058 0,066 0,081 0,086 0,091
1
1,5 x D 0,3 x D 0,5 x D 150 – 200 fz 0,017 0,023 0,029 0,035 0,048 0,058 0,066 0,081 0,086 0,091
2
1,5 x D 0,3 x D 0,5 x D 140 – 190 fz 0,017 0,023 0,029 0,035 0,048 0,058 0,066 0,081 0,086 0,091
3
1,5 x D 0,3 x D 0,5 x D 120 – 160 fz 0,014 0,019 0,024 0,029 0,040 0,048 0,056 0,070 0,076 0,081
4
1,5 x D 0,3 x D 0,3 x D 90 – 150 fz 0,013 0,017 0,022 0,026 0,036 0,043 0,050 0,061 0,066 0,070
5
1,5 x D 0,3 x D 0,5 x D 60 – 100 fz 0,011 0,015 0,019 0,024 0,032 0,039 0,045 0,056 0,060 0,065
6
1,5 x D 0,3 x D 0,3 x D 50 – 75 fz 0,010 0,013 0,016 0,020 0,027 0,032 0,037 0,046 0,049 0,052
M
1
1,5 x D 0,3 x D 0,5 x D 90 – 115 fz 0,014 0,019 0,024 0,029 0,040 0,048 0,056 0,070 0,076 0,081
2
1,5 x D 0,3 x D 0,5 x D 60 – 80 fz 0,011 0,015 0,019 0,024 0,032 0,039 0,045 0,056 0,060 0,065
3
1,5 x D 0,3 x D 0,5 x D 60 – 70 fz 0,010 0,013 0,016 0,020 0,027 0,032 0,037 0,046 0,049 0,052
K
1
1,5 x D 0,3 x D 0,5 x D 120 – 150 fz 0,017 0,023 0,029 0,035 0,048 0,058 0,066 0,081 0,086 0,091
2
1,5 x D 0,3 x D 0,5 x D 110 – 140 fz 0,014 0,019 0,024 0,029 0,040 0,048 0,056 0,070 0,076 0,081
3
1,5 x D 0,3 x D 0,5 x D 110 – 130 fz 0,011 0,015 0,019 0,024 0,032 0,039 0,045 0,056 0,060 0,065
S
1
1,5 x D 0,3 x D 0,3 x D 50 – 90 fz 0,014 0,019 0,024 0,029 0,040 0,048 0,056 0,070 0,076 0,081
2
1,5 x D 0,3 x D 0,3 x D 25 – 40 fz 0,008 0,010 0,013 0,016 0,021 0,026 0,030 0,037 0,040 0,043
3
1,5 x D 0,3 x D 0,3 x D 60 – 80 fz 0,011 0,015 0,019 0,024 0,032 0,039 0,045 0,056 0,060 0,065
4
1,5 x D 0,3 x D 0,5 x D 50 – 60 fz 0,009 0,013 0,016 0,021 0,029 0,036 0,041 0,051 0,056 0,059
H1
1,5 x D 0,3 x D 0,3 x D 80 – 140 fz 0,013 0,017 0,022 0,026 0,036 0,043 0,050 0,061 0,066 0,070
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group.
Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on >12mm diameters.
WID_Master16_SolidEndMilling_HighPerformance_O104_O105_Metric_REBRAND.indd 105 11/10/15 2:19 PM
O106
LViWID M 16 S lidE dMilli Hi hP f O106 O107 M i REBRANDO b 20 20153 59PM
widia.com
High-Performance Solid Carbide End Mills • Finishing
Application Data • Series D507 • Victory™ Grades
High-Performance Solid Carbide End Mills
Series D507 • Victory Grades
Material
Group
Side Milling (A) WP15PE Recommended feed per tooth (fz = mm/th) for side milling (A).
ACutting Speed — vc
m/min D1 — Diameter
ap ae min max mm 4,0 6,0 8,0 10,0 12,0 14,0 16,0 18,0 20,0
P
01,0 x D 0,2 x D 150 – 200 fz 0,028 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114
11,0 x D 0,2 x D 150 – 200 fz 0,028 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114
21,0 x D 0,2 x D 140 – 190 fz 0,028 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114
31,0 x D 0,1 x D 120 – 160 fz 0,023 0,036 0,050 0,061 0,070 0,079 0,087 0,095 0,101
41,0 x D 0,1 x D 90 – 150 fz 0,021 0,033 0,045 0,054 0,062 0,070 0,077 0,083 0,088
51,0 x D 0,1 x D 60 – 100 fz 0,019 0,029 0,040 0,048 0,056 0,063 0,070 0,076 0,081
61,0 x D 0,1 x D 50 – 75 fz 0,016 0,025 0,034 0,040 0,047 0,052 0,057 0,061 0,065
M
11,0 x D 0,1 x D 90 – 115 fz 0,023 0,036 0,050 0,061 0,070 0,079 0,087 0,095 0,101
21,0 x D 0,1 x D 60 – 80 fz 0,019 0,029 0,040 0,048 0,056 0,063 0,070 0,076 0,081
31,0 x D 0,1 x D 60 – 70 fz 0,016 0,025 0,034 0,040 0,047 0,052 0,057 0,061 0,065
K
11,0 x D 0,1 x D 120 – 150 fz 0,028 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114
21,0 x D 0,1 x D 110 – 140 fz 0,023 0,036 0,050 0,061 0,070 0,079 0,087 0,095 0,101
31,0 x D 0,1 x D 110 – 130 fz 0,019 0,029 0,040 0,048 0,056 0,063 0,070 0,076 0,081
S
11,0 x D 0,1 x D 50 – 90 fz 0,023 0,036 0,050 0,061 0,070 0,079 0,087 0,095 0,101
21,0 x D 0,1 x D 25 – 40 fz 0,013 0,019 0,026 0,032 0,037 0,042 0,046 0,050 0,054
31,0 x D 0,15 x D 60 – 80 fz 0,019 0,029 0,040 0,048 0,056 0,063 0,070 0,076 0,081
41,0 x D 0,15 x D 50 – 60 fz 0,016 0,026 0,037 0,045 0,052 0,058 0,064 0,069 0,074
H11,0 x D 0,1 x D 80 – 140 fz 0,021 0,033 0,045 0,054 0,062 0,070 0,077 0,083 0,088
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group.
WID_Master16_SolidEndMilling_HighPerformance_O106_O107_Metric_REBRAND.indd 106 10/30/15 2:24 PM
O107
LViWID M 16 S lidE dMilli Hi hP f O106 O107 M i REBRANDO b 2020153 59PM
widia.com
Series D517 • Victory Grades
Material
Group
Side Milling (A) WP15PE Recommended feed per tooth (fz = mm/th) for side milling (A).
ACutting Speed — vc
m/min D1 — Diameter
ap ae min max mm 4,0 6,0 8,0 10,0 12,0 14,0 16,0 18,0 20,0
P
0Ap1 max 0,05 x D 150 – 200 fz 0,028 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114
1Ap1 max 0,05 x D 150 – 200 fz 0,028 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114
2Ap1 max 0,05 x D 140 – 190 fz 0,028 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114
3Ap1 max 0,05 x D 120 – 160 fz 0,023 0,036 0,050 0,061 0,070 0,079 0,087 0,095 0,101
4Ap1 max 0,05 x D 90 – 150 fz 0,021 0,033 0,045 0,054 0,062 0,070 0,077 0,083 0,088
5Ap1 max 0,05 x D 60 – 100 fz 0,019 0,029 0,040 0,048 0,056 0,063 0,070 0,076 0,081
6Ap1 max 0,05 x D 50 – 75 fz 0,016 0,025 0,034 0,040 0,047 0,052 0,057 0,061 0,065
M
1Ap1 max 0,05 x D 90 – 115 fz 0,023 0,036 0,050 0,061 0,070 0,079 0,087 0,095 0,101
2Ap1 max 0,05 x D 60 – 80 fz 0,019 0,029 0,040 0,048 0,056 0,063 0,070 0,076 0,081
3Ap1 max 0,05 x D 60 – 70 fz 0,016 0,025 0,034 0,040 0,047 0,052 0,057 0,061 0,065
K
1Ap1 max 0,05 x D 120 – 150 fz 0,028 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114
2Ap1 max 0,05 x D 110 – 140 fz 0,023 0,036 0,050 0,061 0,070 0,079 0,087 0,095 0,101
3Ap1 max 0,05 x D 110 – 130 fz 0,019 0,029 0,040 0,048 0,056 0,063 0,070 0,076 0,081
S
1Ap1 max 0,04 x D 50 – 90 fz 0,023 0,036 0,050 0,061 0,070 0,079 0,087 0,095 0,101
2Ap1 max 0,04 x D 25 – 40 fz 0,013 0,019 0,026 0,032 0,037 0,042 0,046 0,050 0,054
3Ap1 max 0,05 x D 60 – 80 fz 0,019 0,029 0,040 0,048 0,056 0,063 0,070 0,076 0,081
4Ap1 max 0,05 x D 50 – 60 fz 0,016 0,026 0,037 0,045 0,052 0,058 0,064 0,069 0,074
H1Ap1 max 0,04 x D 80 – 140 fz 0,021 0,033 0,045 0,054 0,062 0,070 0,077 0,083 0,088
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group.
For better surface finish, reduce feed per tooth.
High-Performance Solid Carbide End Mills • Finishing
Application Data • Series D517 • Victory™ Grades
High-Performance Solid Carbide End Mills
WID_Master16_SolidEndMilling_HighPerformance_O106_O107_Metric_REBRAND.indd 107 10/30/15 2:24 PM
O108
LViWID M 16 S lidE dMilli Hi hP f O108 O109 M i REBRANDO b 20 20153 59PM
widia.com
High-Performance Solid Carbide End Mills • Finishing
Application Data • Series 422822 422826
High-Performance Solid Carbide End Mills
Series 422822 422826
Material
Group
Side Milling (A)
and Slotting (B)
K30F-DCF Recommended feed per tooth (fz = mm/th) for side milling (A).
For slotting (B), reduce fz by 20%.
AlTiN
ACutting Speed — vc
m/min D1 — Diameter
ap ae min – max mm 6,0 8,0 10,0 12,0 14,0 16,0 18,0 20,0 25,0
P
0
1,5 x D 0,05 x D 165 – 165 fz 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114 0,124
1
1,5 x D 0,05 x D 165 – 165 fz 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114 0,124
2
1,5 x D 0,05 x D 154 – 154 fz 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114 0,124
3
1,5 x D 0,05 x D 132 – 132 fz 0,036 0,050 0,061 0,070 0,079 0,087 0,095 0,101 0,114
4
1,5 x D 0,05 x D 99 – 99 fz 0,033 0,045 0,054 0,062 0,070 0,077 0,083 0,088 0,098
5
1,5 x D 0,05 x D 66 – 66 fz 0,029 0,040 0,048 0,056 0,063 0,070 0,076 0,081 0,091
6
1,5 x D 0,04 x D 55 – 55 fz 0,025 0,034 0,040 0,047 0,052 0,057 0,061 0,065 0,071
M
1
1,5 x D 0,05 x D 99 – 99 fz 0,036 0,050 0,061 0,070 0,079 0,087 0,095 0,101 0,114
2
1,5 x D 0,05 x D 66 – 66 fz 0,029 0,040 0,048 0,056 0,063 0,070 0,076 0,081 0,091
3
1,5 x D 0,05 x D 66 – 66 fz 0,025 0,034 0,040 0,047 0,052 0,057 0,061 0,065 0,071
K
1
1,5 x D 0,05 x D 132 – 132 fz 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114 0,124
2
1,5 x D 0,05 x D 121 – 121 fz 0,036 0,050 0,061 0,070 0,079 0,087 0,095 0,101 0,114
3
1,5 x D 0,05 x D 121 – 121 fz 0,029 0,040 0,048 0,056 0,063 0,070 0,076 0,081 0,091
N1
1,5 x D 0,05 x D 275 – 275 fz 0,054 0,072 0,090 0,108 0,126 0,144 0,162 0,180 0,225
S
1
1,5 x D 0,04 x D 55 55 fz 0,036 0,050 0,061 0,070 0,079 0,087 0,095 0,101 0,114
2
1,5 x D 0,04 x D 27.5 27.5 fz 0,019 0,026 0,032 0,037 0,042 0,046 0,050 0,054 0,061
3
1,5 x D 0,05 x D 66 66 fz 0,029 0,040 0,048 0,056 0,063 0,070 0,076 0,081 0,091
4
1,5 x D 0,05 x D 55 55 fz 0,026 0,037 0,045 0,052 0,058 0,064 0,069 0,074 0,084
H1
1,5 x D 0,04 x D 88 – 88 fz 0,033 0,045 0,054 0,062 0,070 0,077 0,083 0,088 0,098
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group.
Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on >12mm diameters.
WID_Master16_SolidEndMilling_HighPerformance_O108_O109_Metric_REBRAND.indd 108 10/30/15 2:24 PM
O109
LViWID M 16 S lidE dMilli Hi hP f O108 O109 M i REBRANDO b 2020153 59PM
widia.com
High-Performance Solid Carbide End Mills • Finishing
Application Data • Series 422827 • Vision Plus™
High-Performance Solid Carbide End Mills
Series 422827 • Vision Plus
Material
Group
Side Milling (A) K30F-DCHP
AlTiN Recommended feed per tooth (fz = mm/th) for side milling (A).
ACutting Speed — vc
m/min D1 — Diameter
ap ae min max mm 6,0 8,0 10,0 12,0 16,0 20,0 25,0
P
1
3 x D 0,05 x D 150 – 200 fz 0,044 0,060 0,072 0,083 0,101 0,114 0,124
2
3 x D 0,05 x D 140 – 190 fz 0,044 0,060 0,072 0,083 0,101 0,114 0,124
3
3 x D 0,05 x D 120 – 160 fz 0,036 0,050 0,061 0,070 0,087 0,101 0,114
4
3 x D 0,05 x D 90 – 150 fz 0,033 0,045 0,054 0,062 0,077 0,088 0,098
5
3 x D 0,05 x D 60 – 100 fz 0,029 0,040 0,048 0,056 0,070 0,081 0,091
6
3 x D 0,05 x D 50 – 75 fz 0,025 0,034 0,040 0,047 0,057 0,065 0,071
M
1
3 x D 0,05 x D 80 – 100 fz 0,036 0,050 0,061 0,070 0,087 0,101 0,114
2
3 x D 0,05 x D 60 – 80 fz 0,029 0,040 0,048 0,056 0,070 0,081 0,091
3
3 x D 0,05 x D 60 – 80 fz 0,025 0,034 0,040 0,047 0,057 0,065 0,071
K
1
3 x D 0,05 x D 120 – 160 fz 0,044 0,060 0,072 0,083 0,101 0,114 0,124
2
3 x D 0,05 x D 110 – 140 fz 0,036 0,050 0,061 0,070 0,087 0,101 0,114
3
3 x D 0,05 x D 100 – 130 fz 0,029 0,040 0,048 0,056 0,070 0,081 0,091
S
1
3 x D 0,05 x D 90 – 115 fz 0,036 0,050 0,061 0,070 0,087 0,101 0,114
2
3 x D 0,05 x D 20 – 40 fz 0,019 0,026 0,032 0,037 0,046 0,054 0,061
3
3 x D 0,05 x D 50 – 80 fz 0,029 0,040 0,048 0,056 0,070 0,081 0,091
4
3 x D 0,05 x D 45 – 65 fz 0,026 0,037 0,045 0,052 0,064 0,074 0,084
H1
3 x D 0,05 x D 100 – 140 fz 0,033 0,045 0,054 0,062 0,077 0,088 0,098
NOTE: Lower value of cutting speed is used for high-stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group.
For better surface finish, reduce feed per tooth.
Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on >12mm diameters.
WID_Master16_SolidEndMilling_HighPerformance_O108_O109_Metric_REBRAND.indd 109 10/30/15 2:24 PM
O110
LViWID M 16 S lidE dMilli Hi hP f O110 O111 M i REBRANDO b 20 20154 03PM
widia.com
High-Performance Solid Carbide End Mills • Finishing
Application Data • Series D518 • Vision Plus™ • Victory™ Grades
High-Performance Solid Carbide End Mills
Series D518 • Vision Plus • Victory Grades
Material
Group
Side Milling (A) WP15PE Recommended feed per tooth (fz = mm/th) for side milling (A).
A
Cutting Speed
— vc
m/min
D1 — Diameter
ap ae min max mm 4,0 5,0 6,0 7,0 8,0 9,0 10,0 12,0 14,0 16,0 18,0 20,0 25,0
P
0Ap1 max 0,05 x D 150 – 200 fz 0,028 0,036 0,044 0,052 0,060 0,066 0,072 0,083 0,092 0,101 0,108 0,114 0,124
1Ap1 max 0,05 x D 150 – 200 fz 0,028 0,036 0,044 0,052 0,060 0,066 0,072 0,083 0,092 0,101 0,108 0,114 0,124
2Ap1 max 0,05 x D 140 – 190 fz 0,028 0,036 0,044 0,052 0,060 0,066 0,072 0,083 0,092 0,101 0,108 0,114 0,124
3Ap1 max 0,05 x D 120 – 160 fz 0,023 0,030 0,036 0,043 0,050 0,055 0,061 0,070 0,079 0,087 0,095 0,101 0,114
4Ap1 max 0,05 x D 90 – 150 fz 0,021 0,027 0,033 0,039 0,045 0,050 0,054 0,062 0,070 0,077 0,083 0,088 0,098
5Ap1 max 0,05 x D 60 – 100 fz 0,019 0,024 0,029 0,035 0,040 0,044 0,048 0,056 0,063 0,070 0,076 0,081 0,091
6Ap1 max 0,04 x D 50 – 75 fz 0,016 0,020 0,025 0,029 0,034 0,037 0,040 0,047 0,052 0,057 0,061 0,065 0,071
M
1Ap1 max 0,05 x D 90 – 115 fz 0,023 0,030 0,036 0,043 0,050 0,055 0,061 0,070 0,079 0,087 0,095 0,101 0,114
2Ap1 max 0,05 x D 60 – 80 fz 0,019 0,024 0,029 0,035 0,040 0,044 0,048 0,056 0,063 0,070 0,076 0,081 0,091
3Ap1 max 0,05 x D 60 – 70 fz 0,016 0,020 0,025 0,029 0,034 0,037 0,040 0,047 0,052 0,057 0,061 0,065 0,071
K
1Ap1 max 0,05 x D 120 – 150 fz 0,028 0,036 0,044 0,052 0,060 0,066 0,072 0,083 0,092 0,101 0,108 0,114 0,124
2Ap1 max 0,05 x D 110 – 140 fz 0,023 0,030 0,036 0,043 0,050 0,055 0,061 0,070 0,079 0,087 0,095 0,101 0,114
3Ap1 max 0,05 x D 110 – 130 fz 0,019 0,024 0,029 0,035 0,040 0,044 0,048 0,056 0,063 0,070 0,076 0,081 0,091
S
1Ap1 max 0,04 x D 50 – 90 fz 0,023 0,030 0,036 0,043 0,050 0,055 0,061 0,070 0,079 0,087 0,095 0,101 0,114
2Ap1 max 0,04 x D 25 – 40 fz 0,013 0,016 0,019 0,023 0,026 0,029 0,032 0,037 0,042 0,046 0,050 0,054 0,061
3Ap1 max 0,05 x D 60 – 80 fz 0,019 0,024 0,029 0,035 0,040 0,044 0,048 0,056 0,063 0,070 0,076 0,081 0,091
4Ap1 max 0,05 x D 50 – 60 fz 0,016 0,021 0,026 0,031 0,037 0,041 0,045 0,052 0,058 0,064 0,069 0,074 0,084
H1Ap1 max 0,04 x D 80 – 140 fz 0,021 0,027 0,033 0,039 0,045 0,050 0,054 0,062 0,070 0,077 0,083 0,088 0,098
2Ap1 max 0,05 x D 70 – 120 fz 0,016 0,020 0,025 0,029 0,034 0,037 0,040 0,047 0,052 0,057 0,061 0,065 0,071
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group.
For better surface finish, reduce feed per tooth.
WID_Master16_SolidEndMilling_HighPerformance_O110_O111_Metric_REBRAND.indd 110 10/30/15 2:24 PM
O111
LViWID M 16 S lidE dMilli Hi hP f O110 O111 M i REBRANDO b 2020154 03PM
widia.com
High-Performance Solid Carbide End Mills
Series 026621 • Cermet End Mill
Material
Group
Side Milling (A) Cermet Recommended feed per tooth (fz = mm/th) for side milling (A).
ACutting Speed — vc
m/min D1 — Diameter
ap ae min max mm 6,0 8,0 10,0 12,0 14,0 16,0 18,0 20,0
P
0
Ap1 max 0,05 x D 225 – 300 fz 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114
1
Ap1 max 0,05 x D 225 – 300 fz 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114
2
Ap1 max 0,05 x D 210 – 285 fz 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114
3
Ap1 max 0,05 x D 180 – 240 fz 0,036 0,050 0,061 0,070 0,079 0,087 0,095 0,101
4
Ap1 max 0,05 x D 135 – 225 fz 0,033 0,045 0,054 0,062 0,070 0,077 0,083 0,088
5
Ap1 max 0,05 x D 90 – 150 fz 0,029 0,040 0,048 0,056 0,063 0,070 0,076 0,081
6
Ap1 max 0,04 x D 75 – 112,5 fz 0,025 0,034 0,040 0,047 0,052 0,057 0,061 0,065
M
1
Ap1 max 0,05 x D 135 – 172,5 fz 0,036 0,050 0,061 0,070 0,079 0,087 0,095 0,101
2
Ap1 max 0,05 x D 90 – 120 fz 0,029 0,040 0,048 0,056 0,063 0,070 0,076 0,081
3
Ap1 max 0,05 x D 90 – 105 fz 0,025 0,034 0,040 0,047 0,052 0,057 0,061 0,065
K
1
Ap1 max 0,05 x D 180 – 225 fz 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114
2
Ap1 max 0,05 x D 165 – 210 fz 0,036 0,050 0,061 0,070 0,079 0,087 0,095 0,101
3
Ap1 max 0,05 x D 165 – 195 fz 0,029 0,040 0,048 0,056 0,063 0,070 0,076 0,081
N
1
Ap1 max 0,05 x D 750 – 3000 fz 0,060 0,080 0,100 0,120 0,140 0,160 0,180 0,200
2
Ap1 max 0,05 x D 750 – 2250 fz 0,054 0,072 0,090 0,108 0,126 0,144 0,162 0,180
3
Ap1 max 0,05 x D 750 – 2250 fz 0,042 0,056 0,070 0,084 0,098 0,112 0,126 0,140
4
Ap1 max 0,05 x D 600 – 1125 fz 0,048 0,064 0,080 0,096 0,112 0,128 0,144 0,160
5
Ap1 max 0,05 x D 375 – 1500 fz 0,054 0,072 0,090 0,108 0,126 0,144 0,162 0,180
6
Ap1 max 0,05 x D 150 – 1125 fz 0,060 0,080 0,100 0,120 0,140 0,160 0,180 0,200
7
Ap1 max 0,05 x D 150 – 1125 fz 0,042 0,056 0,070 0,084 0,098 0,112 0,126 0,140
H1
Ap1 max 0,04 x D 120 – 210 fz 0,033 0,045 0,054 0,062 0,070 0,077 0,083 0,088
2
Ap1 max 0,05 x D 105 – 180 fz 0,025 0,034 0,040 0,047 0,052 0,057 0,061 0,065
NOTE: No slotting for tools with 8 flutes; for 6 flutes ap 0,15 x D.
Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on >12mm diameters.
Application Data • Series 026621 • Cermet End Mill
High-Performance Solid Carbide End Mills • Finishing
WID_Master16_SolidEndMilling_HighPerformance_O110_O111_Metric_REBRAND.indd 111 10/30/15 2:24 PM
O112
LViWID M 16 S lidE dMilli Hi hP f O112 O113 M i REBRANDO b 20 20154 03PM
widia.com
High-Performance Solid Carbide End Mills • Finishing
Application Data • Series 024112
High-Performance Solid Carbide End Mills
Series 024112
Material
Group
Side Milling (A)
and Slotting (B)
K10F-DIA
DIA
Recommended feed per tooth (fz = mm/th) for side milling
(A).
For slotting (B), reduce fz by 20%.
AB
Cutting Speed — vc
m/min D1 — Diameter
ap ae ap min max mm 4,0 6,0 8,0 10,0
N6
0,7 x D 0,5 x D 0,5 x D 100 – 750 fz 0,040 0,060 0,080 0,100
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group.
WID_Master16_SolidEndMilling_HighPerformance_O112_O113_Metric_REBRAND.indd 112 10/30/15 2:24 PM
O113
LViWID M 16 S lidE dMilli Hi hP f O112 O113 M i REBRANDO b 2020154 03PM
widia.com
High-Performance Solid Carbide End Mills
Application Data • Series 024111
Series 024111
Material
Group
Side Milling (A)
and Slotting (B) uncoated Recommended feed per tooth (fz = mm/th) for side milling (A).
For slotting (B), reduce fz by 20%.
AB
Cutting Speed — vc
m/min D1 — Diameter
ap ae ap min max mm 2,0 3,0 4,0 5,0 6,0 8,0 10,0 12,0
N6
0,7 x D 0,5 x D 0,5 x D 100 – 750 fz 0,020 0,030 0,040 0,050 0,060 0,080 0,100 0,120
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group.
High-Performance Solid Carbide End Mills • Finishing
WID_Master16_SolidEndMilling_HighPerformance_O112_O113_Metric_REBRAND.indd 113 10/30/15 2:24 PM
O114
LViWID M 16 S lidE dMilli Hi hP f O114 O115 M i REBRANDN b 13 20153 59PM
widia.com
Micro solid carbide end mills offer plunging, slotting, profi ling, and 3D milling for a wide
range of materials and applications. They are designed to provide effi cient machining in a
wide range of steel, cast iron, copper and copper alloys, and aluminium materials. Micro
square and ball nose tools, designed for the most demanding end users, offer exceptional
tool life and precision at high speeds and feeds.
• 2-fl ute ball nose and 2–3 fl ute cutters with sharp corner.
• Micro tools for a wide range of materials.
• Roughing and fi nishing in one tool.
•Diameter range from 0.4–3mm.
30º Helix Angle
For roughing
and fi nishing.
Rigid shank for high tool strength.
High-Quality Substrate
Improved tool life and
Metal Removal Rates (MRR).
TiAlN PVD Coating
High tool life.
Centre Cutting
For plunging and ramping.
Micro Solid Carbide End Mills
Micro Solid Carbide
End Mills
WID_Master16_SolidEndMilling_HighPerformance_O114_O115_Metric_REBRAND.indd 114 11/13/15 4:23 PM
O115
LViWID M 16 S lidE dMilli Hi hP f O114 O115 M i REBRANDN b 132015359PM
widia.com
Micro Solid Carbide End Mills
•Increases your manufacturing fl exibility and cost effi ciency.
•Suitable for roughing and fi nishing.
•Rigid shank gives extra toughness and strength.
423007 023007 Series 4633 Series
• Diameter range 0,4–3,0mm.
• Steels, stainless steels,
cast iron, and non-ferrous.
• Centre cut ball nose.
• Available coated and
uncoated.
• Wide range of diameters
from 0,4–3mm.
• Medium steel, aluminium,
copper, and cast iron.
• Centre cut.
• Available coated and
uncoated.
• Rigid shank gives extra
toughness and strength.
4632 Series 4651 Series
• Wide range of diameters
from 0,4–2mm.
• Medium steel, aluminium,
copper, and cast iron.
• Centre cut.
• Available coated and
uncoated.
• Ball nose tool in range of
diameter from 1–2mm with
3mm shank.
• Medium steel, aluminium,
copper, and cast iron.
• Centre cut ball nose.
• Available coated and
uncoated.
WID_Master16_SolidEndMilling_HighPerformance_O114_O115_Metric_REBRAND.indd 115 11/13/15 4:23 PM
O116
LViWID M 16 S lidE dMilli Hi hP f O116 O117 M i REBRANDO b 20 20154 02PM
widia.com
K30F K30F-DCHP
Micro Solid Carbide End Mills
Series 023007 423007
End Mill Tolerances
D1
tolerance h10
+ / - D
tolerance h6
+ / -
) 3 0/-0,040 ) 3 0/-0,006
> 3–6 0/-0,048 > 3–6 0/-0,008
> 6–10 0/-0,058 > 6–10 0/-0,009
> 10–18 0/-0,070 > 10–18 0/-0,011
> 18–30 0/-0,084 > 18–30 0/-0,013
Series 023007 423007
grade K30F
uncoated
order # catalogue #
grade K30F-DCHP
AlTiN
order # catalogue # D1 D
length of cut
Ap1 max
length
L
2333055 023007-000004 2343368 423007-000004 0,4 3 0,80 38
2333056 023007-000005 2343370 423007-000005 0,5 3 1,00 38
2333057 023007-000006 2343372 423007-000006 0,6 3 1,20 38
2333058 023007-000008 2343374 423007-000008 0,8 3 1,60 38
2333060 023007-000010 2343376 423007-000010 1,0 3 2,00 38
2333061 023007-000012 2343378 423007-000012 1,2 3 2,40 38
2333064 023007-000015 2343380 423007-000015 1,5 3 3,00 38
2333067 023007-000018 2343382 423007-000018 1,8 3 3,60 38
2333069 023007-000020 2343384 423007-000020 2,0 3 6,00 38
2333070 023007-000025 2343386 423007-000025 2,5 3 7,00 38
2333071 023007-000030 2343388 423007-000030 3,0 3 7,00 38
High-Performance Solid Carbide End Mills
• Centre cutting.
• Standard items listed. Additional
styles and coatings made-to-order.
rst choice
alternate choice
WID_Master16_SolidEndMilling_HighPerformance_O116_O117_Metric_REBRAND.indd 116 10/30/15 2:24 PM
O117
LViWID M 16 S lidE dMilli Hi hP f O116 O117 M i REBRANDO b 2020154 02PM
widia.com
UNCOATED - .. TiAlN-RT
Micro Solid Carbide End Mills
Series 4632
End Mill Tolerances
D1 tolerance e8 D
tolerance h6
+ / -
) 3 -0,014/-0,028 ) 3 0/0,006
> 3–6 -0,020/-0,038 > 3–6 0/0,008
> 6–10 -0,025/-0,047 > 6–10 0/0,009
> 10–18 -0,032/-0,059 > 10–18 0/0,011
> 18–30 -0,040/-0,073 > 18–30 0/0,013
Series 4632
grade UNCOATED
order # catalogue #
grade TiAlN-RT
TiAlN
order # catalogue # D1 D
length of cut
Ap1 max
length
L
1656841 463200400.. 1602266 463200400RT 0,4 3 1,50 38
1656844 463200500.. 1602268 463200500RT 0,5 3 1,50 38
1656849 463200600.. 1602270 463200600RT 0,6 3 1,50 38
1656853 463200800.. 1602273 463200800RT 0,8 3 1,50 38
1656858 463201000.. 1602274 463201000RT 1,0 3 2,00 38
1656863 463201500.. 1602275 463201500RT 1,5 3 2,00 38
1656867 463202000.. — 2,0 3 8,00 38
High-Performance Solid Carbide End Mills
• Centre cutting.
• Standard items listed. Additional
styles and coatings made-to-order.
rst choice
alternate choice
WID_Master16_SolidEndMilling_HighPerformance_O116_O117_Metric_REBRAND.indd 117 10/30/15 2:24 PM
O118
LViWID M 16 S lidE dMilli Hi hP f O118 O119 M i REBRANDO b 20 20154 02PM
widia.com
UNCOATED - .. TiAlN-RT
Micro Solid Carbide End Mills
Series 4633
Series 4633
grade UNCOATED
order # catalogue #
grade TiAlN-RT
TiAlN
order # catalogue # D1 D
length of cut
Ap1 max
length
L
1656873 463300400.. 1656875 463300400RT 0,4 3 1,50 38
1656878 463300500.. 1656880 463300500RT 0,5 3 1,50 38
1656883 463300600.. 1656885 463300600RT 0,6 3 1,50 38
1656888 463300800.. 1656890 463300800RT 0,8 3 1,50 38
1656893 463301000.. 1656895 463301000RT 1,0 3 2,00 38
1656898 463301200.. 1656900 463301200RT 1,2 3 2,00 38
1656901 463301500.. 1656903 463301500RT 1,5 3 2,00 38
1656906 463301800.. 1656908 463301800RT 1,8 3 2,00 38
1656909 463302000.. 1656910 463302000RT 2,0 3 8,00 38
— 1656913 463302500RT 2,5 3 9,00 38
— 1656916 463303000RT 3,0 3 12,00 38
• Centre cutting.
• Standard items listed. Additional
styles and coatings made-to-order.
rst choice
alternate choice
End Mill Tolerances
D1 tolerance e8 D
tolerance h6
+ / -
) 3 -0,014/-0,028 ) 3 0/0,006
> 3–6 -0,020/-0,038 > 3–6 0/0,008
> 6–10 -0,025/-0,047 > 6–10 0/0,009
> 10–18 -0,032/-0,059 > 10–18 0/0,011
> 18–30 -0,040/-0,073 > 18–30 0/0,013
High-Performance Solid Carbide End Mills
WID_Master16_SolidEndMilling_HighPerformance_O118_O119_Metric_REBRAND.indd 118 10/30/15 2:24 PM
O119
LViWID M 16 S lidE dMilli Hi hP f O118 O119 M i REBRANDO b 2020154 02PM
widia.com
UNCOATED - .. TiCN-CT TiAlN-RT
Micro Solid Carbide End Mills
Series 4651
End Mill Tolerances
D1 tolerance e8 D
tolerance h6
+ / -
) 3 -0,014/-0,028 ) 3 0/0,006
> 3–6 -0,020/-0,038 > 3–6 0/0,008
> 6–10 -0,025/-0,047 > 6–10 0/0,009
> 10–18 -0,032/-0,059 > 10–18 0/0,011
> 18–30 -0,040/-0,073 > 18–30 0/0,013
Series 4651
grade UNCOATED
order # catalogue #
grade TiCN-CT
TiCN
order # catalogue #
grade TiAlN-RT
TiAlN
order # catalogue # D1 D
length of cut
Ap1 max
length
L
1656950 465101000.. 1656951 465101000CT 1611066 465101000RT 1,0 3 2,00 38
1656952 465101200.. 1656953 465101200CT 1656954 465101200RT 1,2 3 2,00 38
1656955 465101500.. 1656956 465101500CT 1656957 465101500RT 1,5 3 2,00 38
— 1656959 465101800CT 1656960 465101800RT 1,8 3 2,00 38
1656971 465102000.. 1656972 465102000CT 1602538 465102000RT 2,0 3 2,00 38
High-Performance Solid Carbide End Mills
• Centre cutting.
• Standard items listed. Additional
styles and coatings made-to-order.
rst choice
alternate choice
WID_Master16_SolidEndMilling_HighPerformance_O118_O119_Metric_REBRAND.indd 119 10/30/15 2:24 PM
O120
LViWID M 16 S lidE dMilli Hi hP f O120 O121 M i REBRANDO b 20 20154 02PM
widia.com
High-Performance Solid Carbide End Mills
Micro Solid Carbide End Mills
Application Data • Series 023007 423007
Series 023007 423007
Material
Group
Side Milling (A)
and Slotting (B)
K30F K30F - DCHP Recommended feed per tooth (fz = mm/th) for side milling (A).
For slotting (B), reduce fz by 20%.
uncoated AlTiN
AB
Cutting Speed
— vc
m/min
Cutting Speed
— vc
m/min
D1 — Diameter
ap ae ap min max min max mm 0,4 0,5 0,6 0,8 1,0 1,2 1,5 1,8 2,0 2,5 3,0
P
0
1 x D 0,1 x D 0,25 x D 75 – 100 150 – 200 fz 0,003 0,004 0,004 0,006 0,007 0,009 0,011 0,014 0,015 0,019 0,023
1
1 x D 0,1 x D 0,25 x D 75 – 100 150 – 200 fz 0,003 0,004 0,004 0,006 0,007 0,009 0,011 0,014 0,015 0,019 0,023
2
1 x D 0,1 x D 0,25 x D 70 – 95 140 – 190 fz 0,003 0,004 0,004 0,006 0,007 0,009 0,011 0,014 0,015 0,019 0,023
3
1 x D 0,1 x D 0,25 x D 60 – 80 120 – 160 fz 0,002 0,003 0,004 0,005 0,006 0,007 0,009 0,011 0,012 0,016 0,019
4
1 x D 0,1 x D 0,25 x D – – – 90 – 150 fz 0,002 0,003 0,003 0,005 0,006 0,007 0,009 0,010 0,012 0,014 0,017
5
1 x D 0,1 x D 0,25 x D – – – 60 – 100 fz 0,002 0,003 0,003 0,004 0,005 0,006 0,008 0,009 0,010 0,013 0,016
M1
1 x D 0,1 x D 0,25 x D 45 – 57,5 90 – 115 fz 0,002 0,003 0,004 0,005 0,006 0,007 0,009 0,011 0,012 0,016 0,019
2
1 x D 0,1 x D 0,25 x D – – – 60 – 80 fz 0,002 0,003 0,003 0,004 0,005 0,006 0,008 0,009 0,010 0,013 0,016
K1
1 x D 0,1 x D 0,25 x D 60 – 75 120 – 150 fz 0,003 0,004 0,004 0,006 0,007 0,009 0,011 0,014 0,015 0,019 0,023
2
1 x D 0,1 x D 0,25 x D – – – 110 – 140 fz 0,002 0,003 0,004 0,005 0,006 0,007 0,009 0,011 0,012 0,016 0,019
N
1
1 x D 0,1 x D 0,25 x D 250 – 1000 500 – 2000 fz 0,004 0,006 0,007 0,009 0,011 0,013 0,017 0,020 0,022 0,028 0,033
2
1 x D 0,1 x D 0,25 x D 250 – 750 500 – 1500 fz 0,004 0,005 0,006 0,008 0,010 0,012 0,015 0,018 0,020 0,025 0,030
5
1 x D 0,1 x D 0,25 x D 125 – 500 250 – 1000 fz 0,004 0,005 0,006 0,008 0,010 0,012 0,015 0,018 0,020 0,025 0,030
S
1
1 x D 0,1 x D 0,25 x D – – – 50 – 90 fz 0,002 0,003 0,004 0,005 0,006 0,007 0,009 0,011 0,012 0,016 0,019
2
1 x D 0,1 x D 0,25 x D – – – 25 – 40 fz 0,001 0,002 0,002 0,003 0,003 0,004 0,005 0,006 0,007 0,009 0,010
3
1 x D 0,1 x D 0,25 x D – – – 60 – 80 fz 0,002 0,003 0,003 0,004 0,005 0,006 0,008 0,009 0,010 0,013 0,016
4
1 x D 0,1 x D 0,25 x D – – – 50 – 60 fz 0,001 0,002 0,002 0,003 0,004 0,005 0,006 0,007 0,008 0,010 0,013
H1
1 x D 0,1 x D 0,25 x D – – – 80 – 140 fz 0,002 0,003 0,003 0,005 0,006 0,007 0,009 0,010 0,012 0,014 0,017
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group.
WID_Master16_SolidEndMilling_HighPerformance_O120_O121_Metric_REBRAND.indd 120 10/30/15 2:24 PM
O121
LViWID M 16 S lidE dMilli Hi hP f O120 O121 M i REBRANDO b 2020154 02PM
widia.com
Micro Solid Carbide End Mills
Application Data • Series 4632
High-Performance Solid Carbide End Mills
Series 4632
Material
Group
Side Milling (A)
and Slotting (B) uncoated TiAlN Recommended feed per tooth (fz = mm/th) for side milling (A).
For slotting (B), reduce fz by 20%.
AB
Cutting Speed
— vc
m/min
Cutting Speed
— vc
m/min
D1 — Diameter
ap ae ap min max min max mm 0,4 0,5 0,6 0,8 1,0 1,5 2,0
P
0
1 x D 0,1 x D 0,25 x D 75 – 100 150 – 200 fz 0,003 0,004 0,004 0,006 0,007 0,011 0,015
1
1 x D 0,1 x D 0,25 x D 75 – 100 150 – 200 fz 0,003 0,004 0,004 0,006 0,007 0,011 0,015
2
1 x D 0,1 x D 0,25 x D – – – 140 – 190 fz 0,003 0,004 0,004 0,006 0,007 0,011 0,015
3
1 x D 0,1 x D 0,25 x D – – – 120 – 160 fz 0,002 0,003 0,004 0,005 0,006 0,009 0,012
4
1 x D 0,1 x D 0,25 x D – – – 90 – 150 fz 0,002 0,003 0,003 0,005 0,006 0,009 0,012
M1
1 x D 0,1 x D 0,25 x D – – – 90 – 115 fz 0,002 0,003 0,004 0,005 0,006 0,009 0,012
2
1 x D 0,1 x D 0,25 x D – – – 60 – 80 fz 0,002 0,003 0,003 0,004 0,005 0,008 0,010
K1
1 x D 0,1 x D 0,25 x D – – – 120 – 150 fz 0,003 0,004 0,004 0,006 0,007 0,011 0,015
2
1 x D 0,1 x D 0,25 x D – – – 110 – 140 fz 0,002 0,003 0,004 0,005 0,006 0,009 0,012
N
1
1 x D 0,1 x D 0,25 x D 250 – 1000 500 – 2000 fz 0,004 0,006 0,007 0,009 0,011 0,017 0,022
2
1 x D 0,1 x D 0,25 x D 250 – 750 500 – 1500 fz 0,004 0,005 0,006 0,008 0,010 0,015 0,020
5
1 x D 0,1 x D 0,25 x D 125 – 400 250 – 1000 fz 0,004 0,005 0,006 0,008 0,010 0,015 0,020
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group.
WID_Master16_SolidEndMilling_HighPerformance_O120_O121_Metric_REBRAND.indd 121 10/30/15 2:24 PM
O122
LViWID M 16 S lidE dMilli Hi hP f O122 O123 M i REBRANDO b 20 20154 02PM
widia.com
Micro Solid Carbide End Mills
Application Data • Series 4633
High-Performance Solid Carbide End Mills
Series 4633
Material
Group
Side Milling (A)
and Slotting (B) uncoated TiAlN Recommended feed per tooth (fz = mm/th) for side milling (A).
For slotting (B), reduce fz by 20%.
AB
Cutting
Speed — vc
m/min
Cutting
Speed — vc
m/min
D1 — Diameter
ap ae ap min max min max mm 0,4 0,5 0,6 0,8 1,0 1,2 1,5 1,8 2,0 2,5 3,0
P
01 x D 0,1 x D 0,25 x D 75 – 100 150 – 200 fz 0,030 0,037 0,045 0,060 0,075 0,090 0,113 0,136 0,152 0,191 0,231
11 x D 0,1 x D 0,25 x D 75 – 100 150 – 200 fz 0,030 0,037 0,045 0,060 0,075 0,090 0,113 0,136 0,152 0,191 0,231
21 x D 0,1 x D 0,25 x D – – – 140 – 190 fz 0,030 0,037 0,045 0,060 0,075 0,090 0,113 0,136 0,152 0,191 0,231
31 x D 0,1 x D 0,25 x D – – – 120 – 160 fz 0,024 0,030 0,036 0,049 0,061 0,074 0,092 0,111 0,124 0,157 0,190
41 x D 0,1 x D 0,25 x D – – – 90 – 150 fz 0,023 0,028 0,034 0,045 0,057 0,069 0,086 0,104 0,115 0,145 0,175
M11 x D 0,1 x D 0,25 x D – – – 90 – 115 fz 0,024 0,030 0,036 0,049 0,061 0,074 0,092 0,111 0,124 0,157 0,190
21 x D 0,1 x D 0,25 x D – – – 60 – 80 fz 0,020 0,025 0,031 0,041 0,051 0,062 0,077 0,093 0,103 0,130 0,157
K11 x D 0,1 x D 0,25 x D – – – 120 – 150 fz 0,030 0,037 0,045 0,060 0,075 0,090 0,113 0,136 0,152 0,191 0,231
21 x D 0,1 x D 0,25 x D – – – 110 – 140 fz 0,024 0,030 0,036 0,049 0,061 0,074 0,092 0,111 0,124 0,157 0,190
N
11 x D 0,1 x D 0,25 x D 250 – 1000 500 – 2000 fz 0,044 0,055 0,066 0,088 0,110 0,132 0,165 0,198 0,220 0,275 0,330
21 x D 0,1 x D 0,25 x D 250 – 750 500 – 1500 fz 0,040 0,050 0,059 0,079 0,099 0,119 0,149 0,178 0,198 0,248 0,297
51 x D 0,1 x D 0,25 x D 125 – 400 250 – 1000 fz 0,040 0,050 0,059 0,079 0,099 0,119 0,149 0,178 0,198 0,248 0,297
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group.
WID_Master16_SolidEndMilling_HighPerformance_O122_O123_Metric_REBRAND.indd 122 10/30/15 2:24 PM
O123
LViWID M 16 S lidE dMilli Hi hP f O122 O123 M i REBRANDO b 2020154 02PM
widia.com
Micro Solid Carbide End Mills
Application Data • Series 4651
High-Performance Solid Carbide End Mills
Series 4651
Material
Group
Side Milling (A)
and Slotting (B) uncoated TiAlN TiCN Recommended feed per tooth (fz = mm/th) for side milling (A).
For slotting (B), reduce fz by 20%.
AB
Cutting Speed
— vc
m/min
Cutting Speed
— vc
m/min
Cutting Speed
— vc
m/min
D1 — Diameter
ap ae ap min max min max min max mm 1,0 1,2 1,5 1,8 2,0
P
00,5 x D 0,5 x D 0,5 x D 75 – 100 150 – 200 120 – 160 fz 0,007 0,009 0,011 0,014 0,015
10,5 x D 0,5 x D 0,5 x D 75 – 100 150 – 200 120 – 160 fz 0,007 0,009 0,011 0,014 0,015
20,5 x D 0,5 x D 0,5 x D – – – 140 – 190 112 – 152 fz 0,007 0,009 0,011 0,014 0,015
30,3 x D 0,3 x D 0,3 x D – – – 120 – 160 96 – 128 fz 0,006 0,007 0,009 0,011 0,012
40,3 x D 0,3 x D 0,3 x D – – – 90 – 150 72 – 120 fz 0,006 0,007 0,009 0,010 0,012
M10,3 x D 0,3 x D 0,3 x D – – – 90 – 115 72 – 92 fz 0,006 0,007 0,009 0,011 0,012
20,3 x D 0,3 x D 0,3 x D – – – 60 – 80 48 – 64 fz 0,005 0,006 0,008 0,009 0,010
K10,5 x D 0,5 x D 0,5 x D – – – 120 – 150 96 – 120 fz 0,007 0,009 0,011 0,014 0,015
20,5 x D 0,5 x D 0,5 x D – – – 110 – 140 88 – 112 fz 0,006 0,007 0,009 0,011 0,012
N
10,5 x D 0,5 x D 0,5 x D 250 – 1000 500 – 2000 400 – 1600 fz 0,011 0,013 0,017 0,020 0,022
20,5 x D 0,5 x D 0,5 x D 250 – 750 500 – 1500 400 – 1200 fz 0,010 0,012 0,015 0,018 0,020
50,5 x D 0,5 x D 0,5 x D 125 – 400 250 – 1000 200 – 800 fz 0,010 0,012 0,015 0,018 0,020
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group.
WID_Master16_SolidEndMilling_HighPerformance_O122_O123_Metric_REBRAND.indd 123 10/30/15 2:24 PM
O124
LViWID M 16 S lidE dMilli Hi hP f O124 O125 M i REBRANDN b 12 20159 09AM
widia.com
AluSurf provides extraordinary Metal Removal Rates (MRR) by combining roughing
and fi nishing operations for any aluminium plunging, slotting, and profi ling application.
Its proprietary fl ute geometry is designed for rigidity and improved chip evacuation
generating exceptional wall-to-fl oor perpendicularity, even in thin wall applications.
To ensure a superior fl oor surface fi nish the AluSurf front geometry is equipped with
a wiper facet grind.
• One tool for roughing and fi nishing operations.
• Slotting depths up to 1 x D and peripheral milling
up to 1.5 x D axially at 0.5 x D radially.
• Unequal fl ute spacing for chatter-free performance,
(3-fl ute series only).
• Multiple corner radii and extended neck confi gurations
available as standard.
Centre cutting for
plunging and ramping.
Wiper facet grind for
improved fl oor fi nish.
Innovative heel and core design
stabilises the cutting edges.
Unequal fl ute spacing
for reduced vibrations.
38° and 45° helix end mill
versions for roughing and
fi nishing operations.
AluSurf Aluminium
High-Performance Solid Carbide End Mills •
AluSurf™
WID_Master16_SolidEndMilling_HighPerformance_O124_O125_Metric_REBRAND.indd 124 11/12/15 9:55 AM
O125
LViWID M 16 S lidE dMilli Hi hP f O124 O125 M i REBRANDN b 122015909AM
widia.com
AluSurf™ Series
• Increase your output due to less tool changes and increased Metal Removal Rates (MRR).
• No specifi c tools for roughing and fi nishing necessary.
• Less passes due to 1 x D slotting capability.
• Perfect for MQL (Minimum Quantity Lubrication) methods.
5102 Series 5103 Series
• 2-fl ute, 45° helix.
• Radii and sharp corner
confi guration.
• 3-fl ute, 38° helix.
• Unequal fl ute spacing.
• Radii and sharp corner
confi guration.
51N3 Series
• 3-fl ute, 38° helix.
• Unequal fl ute spacing.
• Extended neck for long-reach
applications.
• Radii and sharp corner
confi guration.
Operation Slotting
AluSurf Delivered 100% Better Surface Finish!
Customer: Aluminium Block
Material: 6061 Aluminium
Workpiece: AluSurf solid carbide end mill.
micro μ
0
0.2
0.4
0.8
1
1.2
0.6
Results: 100% better surface fi nish on walls and fl oor.
COMPETITOR WIDIA-Hanita™
tool: uncoated tools uncoated tools
end mill: 16mm 3-fl ute 16mm 3-fl ute
material: aluminium aluminium
depth of cut (ap): 8mm 8mm
width of cut (ae): 8mm 8mm
speed (Vc): 610 m/min 610 m/min
RPM (N): 12,000 RPM 12,000 RPM
feed rate (Vf): 3,600 mm/min 3,600 mm/min
chip load per tooth (Fz): 0,1 mm/th 0,1 mm/th
metal removal rate: 230 cm3/min 230 cm3/min
WIDIA-Hanita™
AluSurf™
Best Competitor
WID_Master16_SolidEndMilling_HighPerformance_O124_O125_Metric_REBRAND.indd 125 11/12/15 9:56 AM
O126
LViWID M 16 S lidE dMilli Hi hP f O126 O127 M i REBRANDO b 20 20154 01PM
widia.com
UNCOATED
High-Performance Solid Carbide End Mills • Aluminium
Series 5102 • AluSurf™
End Mill Tolerances
D1 tolerance e8 D
tolerance h6
+ / -
) 3 0/0,006 ) 3 0/0,006
> 3–6 0/0,008 > 3–6 0/0,008
> 6–10 0/0,009 > 6–10 0/0,009
> 10–18 0/0,011 > 10–18 0/0,011
> 18–30 0/0,013 > 18–30 0/0,013
Series 5102 • AluSurf
grade UNCOATED
order # catalogue # D1 D
length of cut
Ap1 max
length
L
3484680 510201500.. 1,5 3 6,00 38
3484681 510202000.. 2,0 3 8,00 38
3484682 510202500.. 2,5 3 9,00 38
3484683 510203000.. 3,0 3 12,00 38
3107860 510204001.. 4,0 4 12,00 50
3484684 510205001.. 5,0 5 14,00 50
3484685 510205002.. 5,0 6 14,00 50
3107859 510206002.. 6,0 6 16,00 50
3484686 510208003.. 8,0 8 20,00 63
3484687 510210004.. 10,0 10 22,00 76
3484688 510212005.. 12,0 12 25,00 76
3484689 510214014.. 14,0 14 32,00 83
3484690 510216006.. 16,0 16 32,00 89
3484691 510218018.. 18,0 18 38,00 100
3484692 510220007.. 20,0 20 38,00 104
High-Performance Solid Carbide End Mills
• Centre cutting.
• Wiper facet design for improved oor nishes.
• Standard items listed. Additional styles and coatings
made-to-order.
rst choice
alternate choice
WID_Master16_SolidEndMilling_HighPerformance_O126_O127_Metric_REBRAND.indd 126 10/30/15 2:24 PM
O127
LViWID M 16 S lidE dMilli Hi hP f O126 O127 M i REBRANDO b 2020154 01PM
widia.com
UNCOATED
High-Performance Solid Carbide End Mills • Aluminium
Series 5103 • AluSurf™
Series 5103 • AluSurf
grade UNCOATED
order # catalogue # D1 D
length of cut
Ap1 max
length
L
3484693 510303000.. 3,0 3 12,00 38
3484694 510304001.. 4,0 4 12,00 50
3484695 510305001.. 5,0 5 14,00 50
3484696 510306002.. 6,0 6 16,00 50
3484697 510308003.. 8,0 8 20,00 63
3484698 510310004.. 10,0 10 22,00 76
3484699 510312005.. 12,0 12 25,00 76
3484700 510314014.. 14,0 14 32,00 83
3350935 510316006.. 16,0 16 32,00 89
3484701 510318018.. 18,0 18 38,00 100
3484702 510320007.. 20,0 20 38,00 104
• Centre cutting.
• Unequal ute spacing.
• Wiper facet design for improved oor nishes.
• Standard items listed. Additional styles and coatings
made-to-order.
rst choice
alternate choice
End Mill Tolerances
D1 tolerance e8 D
tolerance h6
+ / -
) 3 0/0,006 ) 3 0/0,006
> 3–6 0/0,008 > 3–6 0/0,008
> 6–10 0/0,009 > 6–10 0/0,009
> 10–18 0/0,011 > 10–18 0/0,011
> 18–30 0/0,013 > 18–30 0/0,013
High-Performance Solid Carbide End Mills
WID_Master16_SolidEndMilling_HighPerformance_O126_O127_Metric_REBRAND.indd 127 10/30/15 2:24 PM
O128
LViWID M 16 S lidE dMilli Hi hP f O128 O129 M i REBRANDN b 12 20159 10AM
widia.com
UNCOATED
High-Performance Solid Carbide End Mills • Aluminium
Series 51N3 • AluSurf™
Series 51N3 • AluSurf
grade UNCOATED
order # catalogue # D1 D D3
length of cut
Ap1 max L3
length
LR¡
3484705 51N306022.. 6,0 6 5,40 9,00 18,00 63 0,20
3484703 51N306002.. 6,0 6 5,40 9,00 18,00 63 0,50
3484704 51N306012.. 6,0 6 5,40 9,00 18,00 63 1,00
3484708 51N308023.. 8,0 8 7,20 12,00 24,00 76 0,20
3484706 51N308003.. 8,0 8 7,20 12,00 24,00 76 0,50
3484707 51N308013.. 8,0 8 7,20 12,00 24,00 76 1,00
3484711 51N310024.. 10,0 10 9,00 15,00 30,00 89 0,20
3484709 51N310004.. 10,0 10 9,00 15,00 30,00 89 0,50
3484710 51N310014.. 10,0 10 9,00 15,00 30,00 89 1,50
3484714 51N312025.. 12,0 12 10,80 18,00 36,00 100 0,20
3484712 51N312005.. 12,0 12 10,80 18,00 36,00 100 0,50
3484713 51N312015.. 12,0 12 10,80 18,00 36,00 100 1,50
3484718 51N316036.. 16,0 16 14,40 24,00 48,00 110 0,20
3484715 51N316006.. 16,0 16 14,40 24,00 48,00 110 0,50
3484716 51N316016.. 16,0 16 14,40 24,00 48,00 110 1,00
3484717 51N316026.. 16,0 16 14,40 24,00 48,00 110 2,00
3484722 51N320037.. 20,0 20 18,80 30,00 60,00 125 0,20
3484719 51N320007.. 20,0 20 18,80 30,00 60,00 125 0,50
3484720 51N320017.. 20,0 20 18,80 30,00 60,00 125 1,50
3484721 51N320027.. 20,0 20 18,80 30,00 60,00 125 4,00
• Centre cutting.
• Unequal ute spacing.
• Wiper facet design for improved oor nishes.
• Standard items listed. Additional styles and coatings
made-to-order.
rst choice
alternate choice
End Mill Tolerances
D1 tolerance e8 D
tolerance h6
+ / -
) 3 0/0,006 ) 3 0/0,006
> 3–6 0/0,008 > 3–6 0/0,008
> 6–10 0/0,009 > 6–10 0/0,009
> 10–18 0/0,011 > 10–18 0/0,011
> 18–30 0/0,013 > 18–30 0/0,013
High-Performance Solid Carbide End Mills
WID_Master16_SolidEndMilling_HighPerformance_O128_O129_Metric_REBRAND.indd 128 11/12/15 9:56 AM
O129
LViWID M 16 S lidE dMilli Hi hP f O128 O129 M i REBRANDN b 122015910AM
widia.com
High-Performance Solid Carbide End Mills • Aluminium
Application Data • Series 5102 • AluSurf™
High-Performance Solid Carbide End Mills
Series 5102 • AluSurf
Material
Group
For Side Milling (A)
and Slotting (B) uncoated Recommended feed per tooth (fz = mm/th) for side milling (A).
For slotting (B), reduce fz by 20%.
AB
Cutting Speed — vc
m/min D1 — Diameter
ap ae ap min max mm 1,5 2,0 4,0 6,0 8,0 10,0 12,0 16,0 20,0
N1
1,5 x D 0,5 x D 1 x D 500 – 2000 fz 0,014 0,018 0,036 0,054 0,072 0,090 0,108 0,144 0,180
2
1,5 x D 0,5 x D 1 x D 500 – 1500 fz 0,012 0,016 0,032 0,049 0,065 0,081 0,097 0,130 0,162
NOTE: Multiply ap for milling machine spindle with ceramic bearings by 0,5.
For better surface fi nish, reduce feed per tooth.
Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on diameters >12mm.
Series 5103 • AluSurf
Material
Group
For Side Milling (A)
and Slotting (B) uncoated Recommended feed per tooth (fz = mm/th) for side milling (A).
For slotting (B), reduce fz by 20%.
AB
Cutting Speed — vc
m/min D1 — Diameter
ap ae ap min max mm 3,0 6,0 8,0 10,0 12,0 16,0 20,0
N1
1,5 x D 0,5 x D 1 x D 500 – 2000 fz 0,027 0,054 0,072 0,090 0,108 0,144 0,180
2
1,5 x D 0,5 x D 1 x D 500 – 1500 fz 0,024 0,049 0,065 0,081 0,097 0,130 0,162
NOTE: Multiply ap for milling machine spindle with ceramic bearings by 0,5.
For better surface fi nish, reduce feed per tooth.
Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on diameters >12mm.
Series 51N3 • AluSurf
Material
Group
For Side Milling (A)
and Slotting (B) uncoated Recommended feed per tooth (fz = mm/th) for side milling (A).
For slotting (B), reduce fz by 20%.
AB
Cutting Speed — vc
m/min D1 — Diameter
ap ae ap min max mm 6,0 8,0 10,0 12,0 16,0 20,0
N1
1 x D 0,5 x D 1 x D 500 – 2000 fz 0,060 0,080 0,100 0,120 0,160 0,200
2
1 x D 0,5 x D 1 x D 500 – 1500 fz 0,054 0,072 0,090 0,108 0,144 0,180
NOTE: Multiply ap for milling machine spindle with ceramic bearings by 0,5.
For better surface fi nish, reduce feed per tooth.
Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on diameters >12mm.
Application Data • Series 5103 • AluSurf™
Application Data • Series 51N3 • AluSurf™
WID_Master16_SolidEndMilling_HighPerformance_O128_O129_Metric_REBRAND.indd 129 11/12/15 9:56 AM
O130
LViWID M 16 S lidE dMilli Hi hP f O130 O131 M i REBRANDN b 12 20159 11AM
widia.com
WIDIA™ solid carbide end mills provide maximum Metal Removal Rates (MRR) and superior
surface quality while reducing machining time in aluminium. The centre cutting design allows
for plunging, slotting, and profi ling applications in any type of aluminium workpiece materials.
The proprietary fl ute geometry is designed to deliver exceptional chip evacuation while
generating fl oor-to-wall straightness, especially thin wall applications. With many styles to
choose from, you can be sure WIDIA will have a solution for your non-ferrous applications.
• One tool for roughing and fi nishing operations.
• Capable of slotting depths up to 1 x D and side milling up to 1.5 x D
axially at 0.5 x D radially (please follow application data for specifi c tool).
• Multiple corner radii and extended neck confi gurations available as standard.
High-Performance Aluminium
Solid Carbide End Mills
HP Aluminium
End Mills Series
WID_Master16_SolidEndMilling_HighPerformance_O130_O131_Metric_REBRAND.indd 130 11/12/15 9:56 AM
O131
LViWID M 16 S lidE dMilli Hi hP f O130 O131 M i REBRANDN b 122015911AM
widia.com
HP Aluminium End Mills Series
• Increase your output due to less tool changes and increased Metal Removal Rates (MRR).
• No specifi c tools for roughing and fi nishing necessary.
• Less passes due to 1 x D slotting capability.
• Perfect for MQL (Minimum Quantity Lubrication) applications.
524149/022849 Series D502 Series
• 1-fl ute, 30° helix.
• DLC coated option for
abrasive aluminium
and carbon.
• Uncoated for aluminium.
• Sharp corner confi guration.
• 2-fl ute, 30° helix.
• TiAlN coated.
• Sharp corner
confi guration.
022814/422814/022817/422817 Series 4102 Series
• 2-fl ute, 45° helix.
• TiAlN coated option.
• Sharp corner confi guration.
• 2-fl ute, 45° helix.
• Sharp corner confi guration.
022852/524152 Series 024101 Series
• 2-fl ute, 45° helix.
• Unequal-fl ute spacing.
• DLC coated option for
abrasive aluminium and
carbon.
• Extended neck for
long-reach applications.
• 2-fl ute, 0° helix.
• PCD tipped for aluminium,
copper and carbon/graphite
compositions.
• Sharp corner confi guration.
4103 Series 4909 Series
• 3-fl ute, 37° helix.
• TiCN coated option.
• Sharp corner confi guration.
• 3-fl ute, 40° helix.
• Coarse cord style
roughing profi le.
• Protective chamfer
confi guration.
4979 Series 49N9 Series
• 3-fl ute, 40° helix.
• TiCN coated option.
• Chamfer pitch roughing
profi le.
• Protective chamfer
confi guration.
• 3-fl ute, 40° helix.
• Coarse cord style
roughing profi le.
• Protective chamfer
confi guration.
• Extended neck for
long-reach applications.
49G9 Series
• 3-fl ute, 40° helix.
• TiCN coated option.
• Coarse cord style
roughing profi le.
• Protective chamfer
confi guration.
• Internal coolant for improved
chip evacuation and higher
tool life.
WID_Master16_SolidEndMilling_HighPerformance_O130_O131_Metric_REBRAND.indd 131 11/12/15 9:56 AM
O132
LViWID M 16 S lidE dMilli Hi hP f O132 O133 M i REBRANDN b 11 20158 52AM
widia.com
K10F-DCL
O132
LViWID M 16 S lidE dMilli Hi hP f O132 O133 M i REBRANDN b 11 20158 52AM
High-Performance Solid Carbide End Mills • Aluminium
Series 524149
Series 524149
grade K10F-DCL
DLC
order # catalogue # D1 D
length of cut
Ap1 max
length
L
2651100 524149-000030 3,0 6 12,00 50
2651314 524149-000040 4,0 6 15,00 60
2651317 524149-000050 5,0 6 17,00 60
2651318 524149-000060 6,0 6 20,00 60
2651319 524149-000080 8,0 10 25,00 75
2651320 524149-000100 10,0 8 25,00 75
2651321 524149-000120 12,0 12 25,00 75
• Centre cutting.
• Standard items listed. Additional styles
and coatings made-to-order.
rst choice
alternate choice
End Mill Tolerances
D1
tolerance h10
+ / - D
tolerance h6
+ / -
) 3 0/0,040 ) 3 0/0,006
> 3–6 0/0,048 > 3–6 0/0,008
> 6–10 0/0,058 > 6–10 0/0,009
> 10–18 0/0,070 > 10–18 0/0,011
> 18–30 0/0,084 > 18–30 0/0,013
High-Performance Solid Carbide End Mills
WID_Master16_SolidEndMilling_HighPerformance_O132_O133_Metric_REBRAND.indd 132 11/11/15 9:37 AM
O133
LViWID M 16 S lidE dMilli Hi hP f O132 O133 M i REBRANDN b 112015852AM
widia.com
K10F
High-Performance Solid Carbide End Mills • Aluminium
Series 022849
Series 022849
grade K10F
uncoated
order # catalogue # D1 D
length of cut
Ap1 max
length
L
2281545 022849-000020 2,0 2 10,00 40
2281546 022849-000030 3,0 3 10,00 40
2281547 022849-000040 4,0 4 14,00 50
2281548 022849-000050 5,0 5 16,00 60
2281549 022849-000060 6,0 6 20,00 60
2281550 022849-000080 8,0 8 25,00 75
2281551 022849-000100 10,0 10 25,00 75
2281552 022849-000120 12,0 12 25,00 75
• Centre cutting.
• Standard items listed. Additional styles
and coatings made-to-order.
rst choice
alternate choice
End Mill Tolerances
D1
tolerance h10
+ / - D
tolerance h6
+ / -
) 3 0/0,040 ) 3 0/0,006
> 3–6 0/0,048 > 3–6 0/0,008
> 6–10 0/0,058 > 6–10 0/0,009
> 10–18 0/0,070 > 10–18 0/0,011
> 18–30 0/0,084 > 18–30 0/0,013
High-Performance Solid Carbide End Mills
WID_Master16_SolidEndMilling_HighPerformance_O132_O133_Metric_REBRAND.indd 133 11/11/15 9:37 AM
O134
LViWID M 16 S lidE dMilli Hi hP f O134 O135 M i REBRANDO b 20 20154 05PM
widia.com
UNCOATED TiAlN-RT
High-Performance Solid Carbide End Mills • Aluminium
Series D502
End Mill Tolerances
D1 tolerance e8 D
tolerance h6
+ / -
) 3 -0,014/-0,028 ) 3 0/0,006
> 3–6 -0,020/-0,038 > 3–6 0/0,008
> 6–10 -0,025/-0,047 > 6–10 0/0,009
> 10–18 -0,032/-0,059 > 10–18 0/0,011
> 18–30 -0,040/-0,073 > 18–30 0/0,013
Series D502
grade UNCOATED
order # catalogue #
grade TiAlN-RT
TiAlN
order # catalogue # D1 D
length of cut
Ap1 max
length
L
1661526 D50203002.. 1602233 D50203002RT 3,0 6 4,00 50
1661530 D50204002.. 1602235 D50204002RT 4,0 6 5,00 54
1661534 D50205002.. 1602236 D50205002RT 5,0 6 6,00 54
1661538 D50206002.. 1661540 D50206002RT 6,0 6 7,00 54
1661543 D50208003.. 1602239 D50208003RT 8,0 8 9,00 58
1661547 D50210004.. 1602240 D50210004RT 10,0 10 11,00 66
1661551 D50212005.. 1602251 D50212005RT 12,0 12 12,00 73
1661555 D50214014.. — 14,0 14 14,00 75
1661560 D50216006.. 1602252 D50216006RT 16,0 16 16,00 82
1661569 D50220007.. — 20,0 20 20,00 92
High-Performance Solid Carbide End Mills
• Centre cutting.
• Standard items listed. Additional styles
and coatings made-to-order.
rst choice
alternate choice
WID_Master16_SolidEndMilling_HighPerformance_O134_O135_Metric_REBRAND.indd 134 10/30/15 2:25 PM
O135
LViWID M 16 S lidE dMilli Hi hP f O134 O135 M i REBRANDO b 2020154 05PM
widia.com
K10F K10F
High-Performance Solid Carbide End Mills • Aluminium
Series 022814 022817
Series 022814 022817
grade K10F
uncoated
order # catalogue #
grade K10F
uncoated
order # catalogue # D1 D
length of cut
Ap1 max
length
L BCH
2332369 022814-000040 2332410 022817-000040 4,0 6 8,00 57 0,10
2332370 022814-000050 2332411 022817-000050 5,0 6 10,00 57 0,10
2332371 022814-000060 2332412 022817-000060 6,0 6 10,00 57 0,10
2332372 022814-000080 2332413 022817-000080 8,0 8 16,00 63 0,10
2332373 022814-000100 2332414 022817-000100 10,0 10 19,00 72 0,10
2332374 022814-000120 2332415 022817-000120 12,0 12 22,00 83 0,20
2332375 022814-000140 2332416 022817-000140 14,0 14 22,00 83 0,20
2332376 022814-000160 2332417 022817-000160 16,0 16 26,00 92 0,20
2332377 022814-000180 2332418 022817-000180 18,0 18 26,00 92 0,20
2332378 022814-000200 2332419 022817-000200 20,0 20 32,00 104 0,20
• Centre cutting.
• Standard items listed. Additional styles
and coatings made-to-order.
rst choice
alternate choice
High-Performance Solid Carbide End Mills
End Mill Tolerances
D1
tolerance h10
+ / - D
tolerance h6
+ / -
) 3 0/0,040 ) 3 0/0,006
> 3–6 0/0,048 > 3–6 0/0,008
> 6–10 0/0,058 > 6–10 0/0,009
> 10–18 0/0,070 > 10–18 0/0,011
> 18–30 0/0,084 > 18–30 0/0,013
Detail X
X
WID_Master16_SolidEndMilling_HighPerformance_O134_O135_Metric_REBRAND.indd 135 10/30/15 2:25 PM
O136
LViWID M 16 S lidE dMilli Hi hP f O136 O137 M i REBRANDO b 20 20154 05PM
widia.com
UNCOATED
High-Performance Solid Carbide End Mills • Aluminium
Series 4102
End Mill Tolerances
D1 tolerance e8 D
tolerance h6
+ / -
) 3 0/0,006 ) 3 0/0,006
> 3–6 0/0,008 > 3–6 0/0,008
> 6–10 0/0,009 > 6–10 0/0,009
> 10–18 0/0,011 > 10–18 0/0,011
> 18–30 0/0,013 > 18–30 0/0,013
Series 4102
grade UNCOATED
order # catalogue # D1 D
length of cut
Ap1 max
length
L
1656432 410201000.. 1,0 3 4,00 38
1656436 410201500.. 1,5 3 6,00 38
1656440 410202000.. 2,0 3 8,00 38
1656444 410202500.. 2,5 3 9,00 38
1656448 410203000.. 3,0 3 12,00 38
1656454 410204001.. 4,0 4 12,00 50
1656458 410205001.. 5,0 5 14,00 50
1656459 410205002.. 5,0 6 14,00 50
1656464 410206002.. 6,0 6 16,00 50
1656468 410208003.. 8,0 8 20,00 63
1656473 410210004.. 10,0 10 22,00 76
1656478 410212005.. 12,0 12 25,00 76
1656484 410214014.. 14,0 14 32,00 83
1656488 410216006.. 16,0 16 32,00 89
1656492 410218018.. 18,0 18 38,00 100
1656496 410220007.. 20,0 20 38,00 104
High-Performance Solid Carbide End Mills
• Centre cutting.
• Standard items listed. Additional styles
and coatings made-to-order.
rst choice
alternate choice
WID_Master16_SolidEndMilling_HighPerformance_O136_O137_Metric_REBRAND.indd 136 10/30/15 2:25 PM
O137
LViWID M 16 S lidE dMilli Hi hP f O136 O137 M i REBRANDO b 2020154 05PM
widia.com
K10F K10F-DCL
High-Performance Solid Carbide End Mills • Aluminium
Series 022852 524152
Series 022852 524152
grade K10F
uncoated
order # catalogue #
grade K10F-DCL
DLC
order # catalogue # D1 D D3
length of cut
Ap1 max L3
length
LR¡
2635004 022852-003005 2635131 524152-003005 3,0 6 2,80 7,00 16,00 57 0,50
2635006 022852-004005 2635153 524152-004005 4,0 6 3,80 8,00 16,00 57 0,50
2635010 022852-004010 2635155 524152-004010 4,0 6 3,80 8,00 16,00 57 1,00
2635063 022852-005005 2635156 524152-005005 5,0 6 4,70 10,00 16,00 57 0,50
2635065 022852-005010 2635157 524152-005010 5,0 6 4,70 10,00 16,00 57 1,00
2635068 022852-006005 2635158 524152-006005 6,0 6 5,70 10,00 19,00 57 0,50
2635072 022852-006010 2635161 524152-006010 6,0 6 5,70 10,00 19,00 57 1,00
2635094 022852-006020 2635162 524152-006020 6,0 6 5,70 10,00 19,00 57 2,00
2635097 022852-008005 2635173 524152-008005 8,0 8 7,70 16,00 25,00 63 0,50
2635100 022852-008010 2635175 524152-008010 8,0 8 7,70 16,00 25,00 63 1,00
2635101 022852-008020 2635176 524152-008020 8,0 8 7,70 16,00 25,00 63 2,00
2635103 022852-010005 2635180 524152-010005 10,0 10 9,70 19,00 30,00 72 0,50
2635104 022852-010010 2635181 524152-010010 10,0 10 9,70 19,00 30,00 72 1,00
2635107 022852-010020 2635193 524152-010020 10,0 10 9,70 19,00 30,00 72 2,00
2635109 022852-012005 2635344 524152-012005 12,0 12 11,70 22,00 36,00 83 0,50
2635110 022852-012010 — 12,0 12 11,70 22,00 36,00 83 1,00
2635124 022852-012020 2635348 524152-012020 12,0 12 11,70 22,00 36,00 83 2,00
2635127 022852-016005 2635349 524152-016005 16,0 16 15,70 26,00 42,00 92 0,50
2635128 022852-016010 2635350 524152-016010 16,0 16 15,70 26,00 42,00 92 1,00
2635129 022852-016020 2635351 524152-016020 16,0 16 15,70 26,00 42,00 92 2,00
2635130 022852-016030 2635383 524152-016030 16,0 16 15,70 26,00 42,00 92 3,00
• Centre cutting.
• Standard items listed. Additional styles
and coatings made-to-order.
rst choice
alternate choice
End Mill Tolerances
D1
tolerance h10
+ / - D
tolerance h6
+ / -
) 3 0/0,040 ) 3 0/0,006
> 3–6 0/0,048 > 3–6 0/0,008
> 6–10 0/0,058 > 6–10 0/0,009
> 10–18 0/0,070 > 10–18 0/0,011
> 18–30 0/0,084 > 18–30 0/0,013
High-Performance Solid Carbide End Mills
WID_Master16_SolidEndMilling_HighPerformance_O136_O137_Metric_REBRAND.indd 137 10/30/15 2:25 PM
O138
LViWID M 16 S lidE dMilli Hi hP f O138 O139 M i REBRANDO b 20 20154 05PM
widia.com
UNCOATED
High-Performance Solid Carbide End Mills • Aluminium
Series 024101
End Mill Tolerances
D1 tolerance e8 D
tolerance h6
+ / -
All +0,03/-0,03 ) 3 0/0,006
> 3–6 0/0,008
> 6–10 0/0,009
> 10–18 0/0,011
> 18–30 0/0,013
Series 024101
grade UNCOATED
Diamond
order # catalogue # D1 D
length of cut
Ap1 max
length
L BCH
2333086 024101-000060 6,0 6 10,00 57 0,08
2333087 024101-000080 8,0 8 15,00 63 0,10
2333088 024101-000100 10,0 10 15,00 72 0,12
High-Performance Solid Carbide End Mills
• Centre cutting.
• PCD tipped.
• Through coolant.
• Standard items listed. Additional styles
and coatings made-to-order.
rst choice
alternate choice
Detail X
X
WID_Master16_SolidEndMilling_HighPerformance_O138_O139_Metric_REBRAND.indd 138 10/30/15 2:25 PM
O139
LViWID M 16 S lidE dMilli Hi hP f O138 O139 M i REBRANDO b 2020154 05PM
widia.com
UNCOATED TiCN-CT
High-Performance Solid Carbide End Mills • Aluminium
Series 4103
Series 4103
grade UNCOATED
order # catalogue #
grade TiCN-CT
TiCN
order # catalogue # D1 D
length of cut
Ap1 max
length
L
1656500 410303000.. 1902322 410303000CT 3,0 3 12,00 38
1656501 410304001.. 1656502 410304001CT 4,0 4 12,00 50
1656503 410304002.. — 4,0 6 12,00 50
1656504 410305001.. 1902576 410305001CT 5,0 5 14,00 50
1656505 410305002.. 1905949 410305002CT 5,0 6 14,00 50
1656506 410306002.. 1656507 410306002CT 6,0 6 16,00 50
1656508 410308003.. 1656509 410308003CT 8,0 8 20,00 63
1656510 410310004.. 1902578 410310004CT 10,0 10 22,00 76
1656511 410312005.. 1902579 410312005CT 12,0 12 25,00 76
1656512 410314014.. 1902593 410314014CT 14,0 14 32,00 83
1656513 410316006.. 1902594 410316006CT 16,0 16 32,00 89
1656514 410318018.. 1902595 410318018CT 18,0 18 38,00 100
1656515 410320007.. 1902596 410320007CT 20,0 20 38,00 104
• Centre cutting.
• Standard items listed. Additional styles
and coatings made-to-order.
rst choice
alternate choice
End Mill Tolerances
D1 tolerance e8 D
tolerance h6
+ / -
) 3 0/0,006 ) 3 0/0,006
> 3–6 0/0,008 > 3–6 0/0,008
> 6–10 0/0,009 > 6–10 0/0,009
> 10–18 0/0,011 > 10–18 0/0,011
> 18–30 0/0,013 > 18–30 0/0,013
High-Performance Solid Carbide End Mills
WID_Master16_SolidEndMilling_HighPerformance_O138_O139_Metric_REBRAND.indd 139 10/30/15 2:25 PM
O140
LViWID M 16 S lidE dMilli Hi hP f O140 O141 M i REBRANDO b 20 20154 04PM
widia.com
UNCOATED UNCOATED - WW
High-Performance Solid Carbide End Mills • Aluminium
Series 4909
Series 4909
grade UNCOATED
order # catalogue #
grade UNCOATED-WW
order # catalogue # D1 D
length of cut
Ap1 max
length
L BCH
1657125 490906002.. 1657126 490906002WW 6,0 6 13,00 57 0,06
1657127 490908003.. 1657128 490908003WW 8,0 8 16,00 63 0,06
1657129 490910004.. 1657131 490910004WW 10,0 10 22,00 72 0,06
1657132 490912005.. 1657134 490912005WW 12,0 12 26,00 83 1,00
1657136 490914014.. 1657137 490914014WW 14,0 14 26,00 83 1,00
1657138 490916006.. 1657140 490916006WW 16,0 16 32,00 92 1,00
1657142 490918018.. 1657143 490918018WW 18,0 18 32,00 92 1,00
1657144 490920007.. 1657145 490920007WW 20,0 20 38,00 104 1,00
1657146 490925008.. 1657148 490925008WW 25,0 25 45,00 121 1,00
• Centre cutting.
• Coarse pitch.
• Standard items listed. Additional styles
and coatings made-to-order.
rst choice
alternate choice
High-Performance Solid Carbide End Mills
End Mill Tolerances
D1 tolerance d11 D
tolerance h6
+ / -
) 3 -0,020/-0,080 ) 3 0/0,006
> 3–6 -0,030/-0,105 > 3–6 0/0,008
> 6–10 -0,040/-0,130 > 6–10 0/0,009
> 10–18 -0,050/-0,160 > 10–18 0/0,011
> 18–30 -0,065/-0,195 > 18–30 0/0,013
Detail X
X
WID_Master16_SolidEndMilling_HighPerformance_O140_O141_Metric_REBRAND.indd 140 10/30/15 2:25 PM
O141
LViWID M 16 S lidE dMilli Hi hP f O140 O141 M i REBRANDO b 2020154 04PM
widia.com
UNCOATED TiCN-CT
High-Performance Solid Carbide End Mills • Aluminium
Series 4979
Series 4979
grade UNCOATED
order # catalogue #
grade TiCN-CT
TiCN
order # catalogue # D1 D
length of cut
Ap1 max
length
LR¡
1858322 497906002.. 1858423 497906002CT 6,0 6 13,00 57 0,25
1858424 497908003.. 1858425 497908003CT 8,0 8 16,00 63 0,25
1858426 497910004.. 1858427 497910004CT 10,0 10 22,00 72 0,50
1858428 497912005.. 1858430 497912005CT 12,0 12 26,00 83 0,50
1858434 497916006.. 1858437 497916006CT 16,0 16 32,00 92 1,00
1858441 497920007.. 1858463 497920007CT 20,0 20 38,00 104 1,00
1858465 497925008.. 1858466 497925008CT 25,0 25 45,00 121 1,50
• Centre cutting.
• Chamfered pitch.
• Standard items listed. Additional styles
and coatings made-to-order.
rst choice
alternate choice
End Mill Tolerances
D1 tolerance d11 D
tolerance h6
+ / -
) 3 -0,020/-0,080 ) 3 0/0,006
> 3–6 -0,030/-0,105 > 3–6 0/0,008
> 6–10 -0,040/-0,130 > 6–10 0/0,009
> 10–18 -0,050/-0,160 > 10–18 0/0,011
> 18–30 -0,065/-0,195 > 18–30 0/0,013
High-Performance Solid Carbide End Mills
WID_Master16_SolidEndMilling_HighPerformance_O140_O141_Metric_REBRAND.indd 141 10/30/15 2:25 PM
O142
LViWID M 16 S lidE dMilli Hi hP f O142 O143 M i REBRANDO b 20 20154 04PM
widia.com
UNCOATED
High-Performance Solid Carbide End Mills • Aluminium
Series 49N9
End Mill Tolerances
D1 tolerance d11 D
tolerance h6
+ / -
) 3 -0,020/-0,080 ) 3 0/0,006
> 3–6 -0,030/-0,105 > 3–6 0/0,008
> 6–10 -0,040/-0,130 > 6–10 0/0,009
> 10–18 -0,050/-0,160 > 10–18 0/0,011
> 18–30 -0,065/-0,195 > 18–30 0/0,013
Series 49N9
grade UNCOATED
order # catalogue # D1 D D3
length of cut
Ap1 max L3
length
LR¡
2510324 49N906002.. 6,0 6 5,00 8,00 18,00 57 0,25
2510325 49N908003.. 8,0 8 7,00 10,00 24,00 63 0,25
2510326 49N910004.. 10,0 10 9,00 12,00 30,00 72 0,50
2510327 49N912005.. 12,0 12 11,00 15,00 36,00 83 0,50
2510328 49N916006.. 16,0 16 14,80 20,00 48,00 92 1,00
2510329 49N920007.. 20,0 20 18,70 24,00 60,00 104 1,00
High-Performance Solid Carbide End Mills
• Centre cutting.
• Chamfered pitch.
• Standard items listed. Additional styles
and coatings made-to-order.
rst choice
alternate choice
WID_Master16_SolidEndMilling_HighPerformance_O142_O143_Metric_REBRAND.indd 142 10/30/15 2:25 PM
O143
LViWID M 16 S lidE dMilli Hi hP f O142 O143 M i REBRANDO b 2020154 04PM
widia.com
TiCN-CT TICN-CW
High-Performance Solid Carbide End Mills • Aluminium
Series 49G9
Series 49G9
grade TiCN-CT
TiCN
order # catalogue #
grade TiCN-CW
TiCN
order # catalogue # D1 D
length of cut
Ap1 max
length
LR¡
1859874 49G908003CT 1902489 49G908003CW 8,0 8 16,00 63 0,25
1859875 49G910004CT 1902490 49G910004CW 10,0 10 22,00 72 0,50
1859876 49G912005CT 1902491 49G912005CW 12,0 12 26,00 83 0,50
1859877 49G916006CT 1902492 49G916006CW 16,0 16 32,00 92 1,00
1859878 49G920007CT 1902493 49G920007CW 20,0 20 38,00 104 1,00
1859879 49G925008CT 1902494 49G925008CW 25,0 25 45,00 121 1,50
• Centre cutting.
• Chamfered pitch.
• Through coolant.
• Standard items listed. Additional styles
and coatings made-to-order.
rst choice
alternate choice
End Mill Tolerances
D1 tolerance d11 D
tolerance h6
+ / -
) 3 -0,020/-0,080 ) 3 0/0,006
> 3–6 -0,030/-0,105 > 3–6 0/0,008
> 6–10 -0,040/-0,130 > 6–10 0/0,009
> 10–18 -0,050/-0,160 > 10–18 0/0,011
> 18–30 -0,065/-0,195 > 18–30 0/0,013
High-Performance Solid Carbide End Mills
WID_Master16_SolidEndMilling_HighPerformance_O142_O143_Metric_REBRAND.indd 143 10/30/15 2:25 PM
O144
LViWID M 16 S lidE dMilli Hi hP f O144 O145 M i REBRANDN b 12 20159 12AM
widia.com
High-Performance Solid Carbide End Mills • Aluminium
Application Data • Series 524149
High-Performance Solid Carbide End Mills
Series 524149
Material
Group
Side Milling (A)
and Slotting (B)
K10F-DCL Recommended feed per tooth (fz = mm/th) for side milling (A).
For slotting (B), reduce fz by 20%.
DLC
AB
Cutting Speed — vc
m/min D1 — Diameter
ap ae ap min max mm 3,0 4,0 5,0 6,0 8,0 10,0 12,0
N
1
1,2 x D 0,5 x D 1 x D 500 – 2000 fz 0,021 0,028 0,035 0,042 0,056 0,070 0,084
2
1,2 x D 0,5 x D 1 x D 500 – 1500 fz 0,019 0,025 0,032 0,038 0,050 0,063 0,076
3
1,2 x D 0,5 x D 1 x D 500 – 1500 fz 0,017 0,022 0,028 0,034 0,045 0,056 0,067
4
1,2 x D 0,5 x D 1 x D 250 – 750 fz 0,015 0,020 0,025 0,029 0,039 0,049 0,059
6
1,2 x D 0,5 x D 1 x D 100 – 500 fz 0,021 0,028 0,035 0,042 0,056 0,070 0,084
NOTE: For better surface fi nish, reduce feed per tooth.
Series 022849
Material
Group
Side Milling (A)
and Slotting (B)
K10F Recommended feed per tooth (fz = mm/th) for side milling (A).
For slotting (B), reduce fz by 20%.
uncoated
AB
Cutting Speed — vc
m/min D1 — Diameter
ap ae ap min max mm 2,0 3,0 4,0 5,0 6,0 8,0 10,0 12,0
N1
1,2 x D 0,5 x D 1 x D 500 – 2000 fz 0,014 0,021 0,028 0,035 0,042 0,056 0,070 0,084
2
1,2 x D 0,5 x D 1 x D 500 – 1500 fz 0,011 0,017 0,022 0,028 0,034 0,045 0,056 0,067
NOTE: For better surface fi nish, reduce feed per tooth.
Series D502
Material
Group
Side Milling (A)
and Slotting (B) uncoated TiAlN Recommended feed per tooth (fz = mm/th) for side milling (A).
For slotting (B), reduce fz by 20%.
AB
Cutting Speed
— vc
m/min
Cutting Speed
— vc
m/min
D1 — Diameter
ap ae ap min max min max mm 3,0 4,0 5,0 6,0 8,0 10,0 12,0 14,0 16,0 20,0
N
1
1,5 x D 0,5 x D 1 x D 500 – 2000 500 – 2000 fz 0,027 0,036 0,045 0,054 0,072 0,090 0,108 0,126 0,144 0,180
2
1,5 x D 0,5 x D 1 x D 500 – 1500 500 – 1500 fz 0,024 0,032 0,041 0,049 0,065 0,081 0,097 0,113 0,130 0,162
3
1,5 x D 0,5 x D 1 x D 500 – 1500 500 – 1500 fz 0,019 0,025 0,032 0,038 0,050 0,063 0,076 0,088 0,101 0,126
4
1,5 x D 0,5 x D 1 x D 400 – 750 400 – 750 fz 0,022 0,029 0,036 0,043 0,058 0,072 0,086 0,101 0,115 0,144
5
1,5 x D 0,5 x D 1 x D 250 – 1000 250 – 1000 fz 0,024 0,032 0,041 0,049 0,065 0,081 0,097 0,113 0,130 0,162
NOTE: For cutting aluminium with high silicon, TiAlN coating is recommended.
Multiply ap for milling machine spindle with ceramic bearings by 0,5.
For better surface fi nish, reduce feed per tooth.
Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on diameters >12mm.
Application Data • Series 022849
Application Data • Series D502
WID_Master16_SolidEndMilling_HighPerformance_O144_O145_Metric_REBRAND.indd 144 11/12/15 9:56 AM
O145
LViWID M 16 S lidE dMilli Hi hP f O144 O145 M i REBRANDN b 122015912AM
widia.com
High-Performance Solid Carbide End Mills • Aluminium
Application Data • Series 022814 022817
High-Performance Solid Carbide End Mills
Series 022814 022817
Material
Group
Side Milling (A)
and Slotting (B)
K10F Recommended feed per tooth (fz = mm/th) for side milling (A).
For slotting (B), reduce fz by 20%.
uncoated
AB
Cutting Speed
— vc
m/min
D1 — Diameter
ap ae ap min max mm 4,0 5,0 6,0 8,0 10,0 12,0 14,0 16,0 18,0 20,0
N
1
1,5 x D 0,5 x D 1 x D 500 – 2000 fz 0,036 0,045 0,054 0,072 0,090 0,108 0,126 0,144 0,162 0,180
2
1,5 x D 0,5 x D 1 x D 500 – 1500 fz 0,032 0,041 0,049 0,065 0,081 0,097 0,113 0,130 0,146 0,162
3
1,5 x D 0,5 x D 1 x D 500 – 1500 fz 0,025 0,032 0,038 0,050 0,063 0,076 0,088 0,101 0,113 0,126
4
1,5 x D 0,5 x D 1 x D 400 – 750 fz 0,029 0,036 0,043 0,058 0,072 0,086 0,101 0,115 0,130 0,144
5
1,5 x D 0,5 x D 1 x D 250 – 1000 fz 0,032 0,041 0,049 0,065 0,081 0,097 0,113 0,130 0,146 0,162
NOTE: Multiply ap for milling machine spindle with ceramic bearings by 0,5.
For better surface fi nish, reduce feed per tooth.
Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on diameters >12mm.
Step ID: 100022864
Module Number: 22544
Module Name: Application Data • List 4102
Web Name: Application Data • List 4102
Series 4102
Material
Group
Side Milling (A)
and Slotting (B) uncoated Recommended feed per tooth (fz = mm/th) for side milling (A).
For slotting (B), reduce fz by 20%.
AB
Cutting Speed
— vc
m/min
D1 — Diameter
ap ae ap min max mm 1,5 2,0 3,0 4,0 6,0 8,0 10,0 12,0 16,0 18,0 20,0
N
1
1,5 x D 0,5 x D 1 x D 500 – 2000 fz 0,014 0,018 0,027 0,036 0,054 0,072 0,090 0,108 0,144 0,162 0,180
2
1,5 x D 0,5 x D 1 x D 500 – 1500 fz 0,012 0,016 0,024 0,032 0,049 0,065 0,081 0,097 0,130 0,146 0,162
3
1,5 x D 0,5 x D 1 x D 500 – 1500 fz 0,009 0,013 0,019 0,025 0,038 0,050 0,063 0,076 0,101 0,113 0,126
4
1,5 x D 0,5 x D 1 x D 400 – 750 fz 0,011 0,014 0,022 0,029 0,043 0,058 0,072 0,086 0,115 0,130 0,144
5
1,5 x D 0,5 x D 1 x D 250 – 1000 fz 0,012 0,016 0,024 0,032 0,049 0,065 0,081 0,097 0,130 0,146 0,162
NOTE: Multiply ap for milling machine spindle with ceramic bearings by 0,5.
For better surface fi nish, reduce feed per tooth.
Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on diameters >12mm.
Application Data • Series 4102
WID_Master16_SolidEndMilling_HighPerformance_O144_O145_Metric_REBRAND.indd 145 11/12/15 9:56 AM
O146
LViWID M 16 S lidE dMilli Hi hP f O146 O147 M i REBRANDO b 20 20154 04PM
widia.com
High-Performance Solid Carbide End Mills • Aluminium
Application Data • Series 022852 524152
High-Performance Solid Carbide End Mills
Series 022852 524152
Material
Group
Side Milling (A)
and Slotting (B)
K10F K10F–DCL Recommended feed per tooth (fz = mm/th) for side milling (A).
For slotting (B), reduce fz by 20%.
uncoated DLC
AB
Cutting Speed
— vc
m/min
Cutting Speed
— vc
m/min
D1 — Diameter
ap ae ap min max min max mm 3,0 4,0 6,0 8,0 10,0 12,0 14,0 16,0
N
1
1,2 x D 0,5 x D 1 x D 500 – 2000 500 – 2000 fz 0,021 0,028 0,042 0,056 0,070 0,084 0,098 0,112
2
1,2 x D 0,5 x D 1 x D 500 – 1500 500 – 1500 fz 0,019 0,025 0,038 0,050 0,063 0,076 0,088 0,101
3
1,2 x D 0,5 x D 1 x D – – – 500 – 1500 fz 0,017 0,022 0,034 0,045 0,056 0,067 0,078 0,090
4
1,2 x D 0,5 x D 1 x D – – – 400 – 750 fz 0,015 0,020 0,029 0,039 0,049 0,059 0,069 0,078
6
1,2 x D 0,5 x D 1 x D – – – 750 – 1200 fz 0,021 0,028 0,042 0,056 0,070 0,084 0,098 0,112
NOTE: For cutting aluminium with high silicon, DLC coating is recommended.
Multiply ap for milling machine spindle with ceramic bearings by 0.5.
For better surface fi nish, reduce feed per tooth.
Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on diameters >12mm.
Series 024101
Material
Group
Side Milling (A)
and Slotting (B)
PCD Recommended feed per tooth (fz = mm/th) for side milling (A).
For slotting (B), reduce fz by 20%.
PCD–PT
AB
Cutting Speed — vc
m/min D1 — Diameter
ap ae ap min max mm 6,0 8,0 10,0 12,0
N
2
1 x D 0,5 x D 0,7 x D 400 – 2500 fz 0,055 0,075 0,095 0,100
3
1 x D 0,5 x D 0,7 x D 300 – 1500 fz 0,055 0,075 0,095 0,100
4
1 x D 0,5 x D 0,7 x D 500 – 3000 fz 0,055 0,075 0,095 0,100
5
1 x D 0,5 x D 0,7 x D 200 – 1000 fz 0,055 0,075 0,095 0,100
6
1 x D 0,5 x D 0,7 x D 400 – 800 fz 0,055 0,075 0,095 0,100
Application Data • Series 024101
WID_Master16_SolidEndMilling_HighPerformance_O146_O147_Metric_REBRAND.indd 146 10/30/15 2:25 PM
O147
LViWID M 16 S lidE dMilli Hi hP f O146 O147 M i REBRANDO b 2020154 04PM
widia.com
High-Performance Solid Carbide End Mills • Aluminium
Application Data • Series 4103
High-Performance Solid Carbide End Mills
Series 4103
Material
Group
Side Milling (A)
and Slotting (B) uncoated TiCN Recommended feed per tooth (fz = mm/th) for side milling (A).
For slotting (B), reduce fz by 20%.
AB
Cutting Speed
— vc
m/min
Cutting Speed
— vc
m/min
D1 — Diameter
ap ae ap min max min max mm 3,0 4,0 6,0 8,0 10,0 12,0 16,0 20,0
N1
1 x D 0,5 x D 0,7 x D 500 – 2000 500 – 2000 fz 0,027 0,036 0,054 0,072 0,090 0,108 0,144 0,180
2
1 x D 0,5 x D 0,7 x D 500 – 1500 500 – 1500 fz 0,024 0,032 0,049 0,065 0,081 0,097 0,130 0,162
NOTE: For cutting aluminium with high silicon, TiCN coating is recommended.
Multiply ap for milling machine spindle with ceramic bearings by 0.5.
For better surface fi nish, reduce feed per tooth.
Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on diameters >12mm.
Series 4909
Material
Group
Side Milling (A)
and Slotting (B) uncoated Recommended feed per tooth (fz = mm/th) for side milling (A).
For slotting (B), reduce fz by 20%.
AB
Cutting Speed — vc
m/min D1 — Diameter
ap ae ap min max max 6,0 8,0 10,0 12,0 16,0 20,0 25,0
N1
1,5 x D 0,5 x D 1 x D 500 – 2000 fz 0,066 0,088 0,110 0,132 0,176 0,220 0,275
2
1,5 x D 0,5 x D 1 x D 500 – 1500 fz 0,059 0,079 0,099 0,119 0,158 0,198 0,248
NOTE: For cutting aluminium with high silicon TiCN coating is recommended.
Multiply ap for milling machine spindle with ceramic bearings by 0,5.
Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on diameters >12mm.
Application Data • Series 4909
WID_Master16_SolidEndMilling_HighPerformance_O146_O147_Metric_REBRAND.indd 147 10/30/15 2:25 PM
O148
LViWID M 16 S lidE dMilli Hi hP f O148 O149 M i REBRANDO b 20 20154 04PM
widia.com
High-Performance Solid Carbide End Mills • Aluminium
Application Data • Series 4979
High-Performance Solid Carbide End Mills
Series 4979
Material
Group
Side Milling (A)
and Slotting (B) uncoated Recommended feed per tooth (fz = mm/th) for side milling (A).
For slotting (B), reduce fz by 20%.
AB
Cutting Speed — vc
m/min D1 — Diameter
ap ae ap min max mm 6,0 8,0 10,0 12,0 16,0 18,0 20,0
N
1
1,5 x D 0,5 x D 1 x D 500 – 2000 fz 0,072 0,096 0,120 0,144 0,192 0,216 0,240
2
1,5 x D 0,5 x D 1 x D 500 – 1500 fz 0,065 0,086 0,108 0,130 0,173 0,194 0,216
3
1,5 x D 0,5 x D 1 x D 500 – 1500 fz 0,050 0,067 0,084 0,101 0,134 0,151 0,168
4
1,5 x D 0,5 x D 1 x D 400 – 750 fz 0,058 0,077 0,096 0,115 0,154 0,173 0,192
5
1,5 x D 0,5 x D 1 x D 250 – 1000 fz 0,065 0,086 0,108 0,130 0,173 0,194 0,216
NOTE: For cutting aluminium with high silicon, TiCN coating is recommended.
Multiply ap for milling machine spindle with ceramic bearings by 0,5.
Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on diameters >12mm.
Series 49N9
Material
Group
Side Milling (A)
and Slotting (B) uncoated Recommended feed per tooth (fz = mm/th) for side milling (A).
For slotting (B), reduce fz by 20%.
AB
Cutting Speed — vc
m/min D1 — Diameter
ap ae ap min max mm 6,0 8,0 10,0 12,0 16,0 18,0 20,0
N
1
1 x D 0,5 x D 1 x D 500 – 2000 fz 0,072 0,096 0,120 0,144 0,192 0,216 0,240
2
1 x D 0,5 x D 1 x D 500 – 1500 fz 0,065 0,086 0,108 0,130 0,173 0,194 0,216
3
1 x D 0,5 x D 1 x D 500 – 1500 fz 0,050 0,067 0,084 0,101 0,134 0,151 0,168
4
1 x D 0,5 x D 1 x D 400 – 750 fz 0,058 0,077 0,096 0,115 0,154 0,173 0,192
5
1 x D 0,5 x D 1 x D 250 – 1000 fz 0,065 0,086 0,108 0,130 0,173 0,194 0,216
NOTE: For cutting aluminium with high silicon, TiCN coating is recommended.
Multiply ap for milling machine spindle with ceramic bearings by 0,5.
Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on diameters >12mm.
Application Data • Series 49N9
WID_Master16_SolidEndMilling_HighPerformance_O148_O149_Metric_REBRAND.indd 148 10/30/15 2:25 PM
O149
LViWID M 16 S lidE dMilli Hi hP f O148 O149 M i REBRANDO b 2020154 04PM
widia.com
High-Performance Solid Carbide End Mills • Aluminium
Application Data • Series 49G9
High-Performance Solid Carbide End Mills
Series 49G9
Material
Group
Side Milling (A)
and Slotting (B) uncoated Recommended feed per tooth (fz = mm/th) for side milling (A).
For slotting (B), reduce fz by 20%.
AB
Cutting Speed — vc
m/min D1 — Diameter
ap ae ap min max mm 6,0 8,0 10,0 12,0 16,0 18,0 20,0
N
1
1 x D 0,5 x D 1 x D 500 – 2000 fz 0,072 0,096 0,120 0,144 0,192 0,216 0,240
2
1 x D 0,5 x D 1 x D 500 – 1500 fz 0,065 0,086 0,108 0,130 0,173 0,194 0,216
3
1 x D 0,5 x D 1 x D 500 – 1500 fz 0,050 0,067 0,084 0,101 0,134 0,151 0,168
4
1 x D 0,5 x D 1 x D 400 – 750 fz 0,058 0,077 0,096 0,115 0,154 0,173 0,192
5
1 x D 0,5 x D 1 x D 250 – 1000 fz 0,065 0,086 0,108 0,130 0,173 0,194 0,216
NOTE: Multiply ap for milling machine spindle with ceramic bearings by 0,5.
Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on diameters >12mm.
WID_Master16_SolidEndMilling_HighPerformance_O148_O149_Metric_REBRAND.indd 149 10/30/15 2:25 PM
O150
LViWID M 16 S lidE dMilli Hi hP f O150 O151 M i REBRANDN b 12 20159 14AM
widia.com
X-Feed™ End Mills for
High-Feed Milling
X-Feed signifi cantly reduces manufacturing time machining heat-treated steels up to 67 HRC
hardness, having 50% more effective cutting edges than regular solid carbide tooling. X-Feed
combines roughing and semi-fi nishing into one operation by taking shallow depths-of-cut at
extremely high feed rates, maximising Metal Removal Rates (MRR). X-Feed, which has a 3 x D neck
and extended reach design, is perfectly suited for pocketing using 3D machining techniques such as
ramping and helical interpolation. During face milling, the proprietary front-end geometry of X-Feed
is entirely in contact with the workpiece, providing up to 55% engagement compared to the regular
5–10% provided by ball nose-type tooling.
• Proprietary 6-fl ute design for high productivity.
• One tool for roughing and semi-fi nishing operations.
• Covering hardened materials ranging from 37–67 HRC
with two dedicated geometries.
• Custom solutions tailored for machining titanium and
other high-temperature alloys available.
Proprietary geometry maximising
Metal Removal Rates (MRR).
6-fl ute design allowing helical
ramping, circular interpolation,
and face milling.
Necked shank providing extended
reach in deep cavities.
AlTiN coated for maximum tool life.
X-Feed
WID_Master16_SolidEndMilling_HighPerformance_O150_O151_Metric_REBRAND.indd 150 11/12/15 9:56 AM
O151
LViWID M 16 S lidE dMilli Hi hP f O150 O151 M i REBRANDN b 122015914AM
widia.com
X-Feed™ Series
• Signifi cantly reduces manufacturing time in machining hardened steels.
• Providing the benefi ts of indexable style high-feed milling starting from as small as 6mm.
• Increases your capability to perform 3D machining, helical ramping, circular interpolation, face milling, and pocketing.
• One tool for roughing and semi-fi nishing.
70N6 Series 70N7 Series
• 6-fl ute.
• Extended neck for
long-reach applications.
• Applicable for hardened
steels from 40–52 HRC.
• 6-fl ute.
• Extended neck for
long-reach applications.
• Applicable for hardened
steels from 50–67 HRC.
Operation Pocket Milling
Increased Metal Removal Rate (MRR) by 191%
Customer: Die and Mould Manufacturer
Material: AISI 4340 hardened steel (52 HRc)
Workpiece: Mould
Metal Removal Rate (MRR)
(cm3/min)
700
600
500
400
300
200
100
Results: • 3x better Metal Removal Rate (MRR)
than competitive tool!
• Machined at more than 3x faster feed!
COMPETITOR WIDIA™-Hanita™
tool: 6-fl ute H/P for die & mould 70N612005MT
material: medium-hardened steel
(52 HRc)
medium-hardened steel
(52 HRc)
surface speed: 120 m/min 160 m/min
feed per tooth: 0,34mm 0,34mm
depth of cut: 0,8mm 0,6mm
table feed: 4,331 mm/min 15,287 mm/min Best Competitor WIDIA-Hanita
metal removal rate: 22,8 cm360,5 cm3
Individual results may vary.
WID_Master16_SolidEndMilling_HighPerformance_O150_O151_Metric_REBRAND.indd 151 11/12/15 9:56 AM
O152
LViWID M 16 S lidE dMilli Hi hP f O152 O153 M i REBRANDN b 11 20158 53AM
widia.com
High-Performance Solid Carbide End Mills
AlTiN-MT1
High-Performance Solid Carbide End Mills • Hard Materials
Series 70N6 71N6 • 37–52 HRC • Vision Plus™ X-Feed™
Series 70N6 71N6 • 37–52 HRC • Vision Plus X-Feed
grade AlTiN-MT1
AlTiN
order # catalogue # D1 D D3
length of cut
Ap1 max L3
length
LR¡Rt
3745400 71N606002MT 6,0 6 5,50 0,32 9,00 57 0,38 0,62
3341346 70N606002MT 6,0 6 5,50 0,32 18,00 63 0,38 0,62
3745401 71N608003MT 8,0 8 7,50 0,42 12,00 63 0,50 0,83
3341348 70N608003MT 8,0 8 7,50 0,42 24,00 76 0,50 0,83
3745402 71N610004MT 10,0 10 9,00 0,53 15,00 72 0,63 1,04
3101466 70N610004MT 10,0 10 9,00 0,53 30,00 89 0,63 1,04
3745413 71N612005MT 12,0 12 11,00 0,63 18,00 83 0,75 1,24
3101467 70N612005MT 12,0 12 11,00 0,63 36,00 100 0,75 1,24
3484748 70N616006MT 16,0 16 15,00 0,84 48,00 110 1,00 1,66
3484749 70N620007MT 20,0 20 19,00 1,05 60,00 125 1,25 2,07
• Non-centre cutting.
• Standard items listed. Additional styles
and coatings made-to-order.
rst choice
alternate choice
End Mill Tolerances
D1 tolerance e8 D
tolerance h6
+ / -
) 3 -0,014/-0,028 ) 3 0/0,006
> 3–6 -0,020/-0,038 > 3–6 0/0,008
> 6–10 -0,025/-0,047 > 6–10 0/0,009
> 10–18 -0,032/-0,059 > 10–18 0/0,011
> 18–30 -0,040/-0,073 > 18–30 0/0,013
NOTE: YRC = distance from centre line to the crown of the R radius.
RCN = distance from centre line to the start of the cutting edge. This dimension can also help determine the minimum circle size when helical ramping.
R = the head radius size.
R
¡
= the shoulder radius or radius at the corner of the cutter.
Tool List 70N6
Geometrical Parameters
Ramping Guide for Circular and Linear Interpolation
Circular Interpolation Linear Interpolation
Allowed Range of
Hole Diameter
Calculated Length (mm) per Ramp Angle
diameter Ap1 max Rfm Rt Rc Xfm Yfm YD Number Ramp Angle (degree)
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] flutes Smallest Largest 1 2 3 4 5
6 0,32 6 0,62 0,375 0,32 0,75 1,32 6 8,64 12 18,12 9,06 6,03 4,52 3,61
8 0,42 8 0,83 0,500 0,42 1,00 1,76 6 11,52 16 24,16 12,08 8,05 6,03 4,82
10 0,53 10 1,04 0,625 0,53 1,25 2,20 6 14,4 20 30,20 15,09 10,06 7,54 6,02
12 0,63 12 1,24 0,750 0,63 1,50 2,64 6 17,28 24 36,24 18,11 12,07 9,05 7,23
16 0,84 16 1,66 1,000 0,84 2,00 3,52 6 23,04 32 48,31 24,15 16,09 12,06 9,64
20 1,05 20 2,07 1,250 1,05 2,50 4,40 6 28,8 40 60,39 30,19 20,11 15,08 12,05
Recommended Feed 100% 70% 50% 30% 10%
Programming Data
WID_Master16_SolidEndMilling_HighPerformance_O152_O153_Metric_REBRAND.indd 152 11/11/15 9:37 AM
O153
LViWID M 16 S lidE dMilli Hi hP f O152 O153 M i REBRANDN b 112015853AM
widia.com
AlTiN-MT1
High-Performance Solid Carbide End Mills • Hard Materials
Series 70N7 • >52 HRC • Vision Plus™ X-Feed™
Programming Data
NOTE: YRC = distance from centre line to the crown of the R radius.
RCN = distance from centre line to the start of the cutting edge. This dimension can also help determine the minimum circle size when helical ramping.
R = the head radius size.
R
¡
= the shoulder radius or radius at the corner of the cutter.
End Mill Tolerances
D1 tolerance e8 D
tolerance h6
+ / -
) 3 -0,014/-0,028 ) 3 0/0,006
> 3–6 -0,020/-0,038 > 3–6 0/0,008
> 6–10 -0,025/-0,047 > 6–10 0/0,009
> 10–18 -0,032/-0,059 > 10–18 0/0,011
> 18–30 -0,040/-0,073 > 18–30 0/0,013
Series 70N7 • >52 HRC • Vision Plus X-Feed
grade AlTiN-MT1
AlTiN
order # catalogue # D1 D D3
length of cut
Ap1 max L3
length
LR¡Rt
3484756 70N706002MT 6,0 6 5,50 0,20 18,00 63 0,38 0,58
3484757 70N708003MT 8,0 8 7,50 0,27 24,00 76 0,50 0,77
3484758 70N710004MT 10,0 10 9,00 0,33 30,00 89 0,63 0,96
3403492 70N712005MT 12,0 12 11,00 0,40 36,00 100 0,75 1,15
3477329 70N716006MT 16,0 16 15,00 0,54 48,00 110 1,00 1,54
3484759 70N720007MT 20,0 20 19,00 0,67 60,00 125 1,25 1,92
Tool List 70N7
Geometrical Parameters
Ramping Guide for Circular and Linear Interpolation
Circular Interpolation Linear Interpolation
Allowed Range of
Hole Diameter
Calculated Length (mm) per Ramp Angle
diameter Ap1 max Rfm Rt Rc Xfm Yfm YD Number Ramp Angle (degree)
[mm][mm][mm][mm][mm][mm][mm][mm]flutesSmallestLargest 12345
6 0,20 9 0,58 0,375 0,20 0,75 1,26 6 8,52 12 11,51 5,75 3,83 2,87 2,30
8 0,27 12 0,77 0,500 0,27 1,00 1,68 6 11,36 16 15,34 7,67 5,11 3,83 3,06
10 0,33 15 0,96 0,625 0,33 1,25 2,10 6 14,2 20 19,18 9,58 6,39 4,79 3,83
12 0,40 18 1,15 0,750 0,40 1,50 2,52 6 17,04 24 23,01 11,50 7,66 5,74 4,59
16 0,54 24 1,54 1,000 0,54 2,00 3,36 6 22,72 32 30,68 15,34 10,22 7,66 6,12
20 0,67 30 1,92 1,250 0,67 2,50 4,20 6 28,4 40 38,35 19,17 12,77 9,57 7,65
Recommended Feed 100% 70% 50% 30% 10%
• Non-centre cutting.
• Standard items listed. Additional styles
and coatings made-to-order.
rst choice
alternate choice
High-Performance Solid Carbide End Mills
WID_Master16_SolidEndMilling_HighPerformance_O152_O153_Metric_REBRAND.indd 153 11/11/15 9:37 AM
O154
LViWID M 16 S lidE dMilli Hi hP f O154 O155 M i REBRANDO b 20 20154 03PM
widia.com
High-Performance Solid Carbide End Mills • Hard Materials
Application Data • Series 70N6 71N6 • Vision Plus™ X-Feed™
Series 70N6 71N6 • Vision Plus X-Feed
Material
Group
Profile Milling AlTiN Recommended Feed Per Tooth (fz = mm/th) for 3D milling/profiling (A)
ACutting Speed — vc
m/min D1 — Diameter
ap ae min max mm 6,0 8,0 10,0 12,0 16,0 20,0
P4
0,05 x D 0,55 x D 160 – 180 fz 0,300 0,500 0,500 0,500 0,600 0,700
H1
0,05 x D 0,55 x D 140 – 160 fz 0,300 0,500 0,500 0,500 0,600 0,700
2
0,05 x D 0,55 x D 100 – 120 fz 0,200 0,300 0,300 0,400 0,500 0,600
NOTE: Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters on diameters >12mm.
High-Performance Solid Carbide End Mills
WID_Master16_SolidEndMilling_HighPerformance_O154_O155_Metric_REBRAND.indd 154 10/30/15 2:25 PM
O155
LViWID M 16 S lidE dMilli Hi hP f O154 O155 M i REBRANDO b 2020154 03PM
widia.com
High-Performance Solid Carbide End Mills
High-Performance Solid Carbide End Mills • Hard Materials
Application Data • Series 70N7 • Vision Plus™ X-Feed™
Series 70N7 • Vision Plus X-Feed
Material
Group
Profile Milling AlTiN Recommended Feed Per Tooth (fz = mm/th) for 3D milling/profiling (A)
ACutting Speed — vc
m/min D1 — Diameter
ap ae min max mm 6,0 8,0 10,0 12,0 16,0 20,0
H
2
0,03 x D 0,55 x D 100 – 120 fz 0,200 0,300 0,300 0,400 0,500 0,600
3
0,03 x D 0,55 x D 80 – 100 fz 0,200 0,300 0,300 0,400 0,500 0,600
4
0,03 x D 0,55 x D 50 – 70 fz 0,150 0,200 0,250 0,300 0,400 0,500
NOTE: Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on diameters >12mm.
WID_Master16_SolidEndMilling_HighPerformance_O154_O155_Metric_REBRAND.indd 155 10/30/15 2:25 PM
O156
LViWID M 16 S lidE dMilli Hi hP f O156 O157 M i REBRANDN b 12 20159 15AM
widia.com
Engineered to machine hardened steels up to 67 HRC at extreme speeds and feeds,
Vision Plus solid carbide end mills are designed with a special substrate and geometries
to extend tool life and lower manufacturing costs. Vision Plus end mills offer a complete
portfolio for the die and mould industry or any application that requires machining of
hardened workpiece materials. Vision Plus end mills will make your next application
in hardened materials more productive and effi cient.
• Capable of machining hardened steels up to 67 HRC.
• Complete line of Vision Plus micro end mills.
• Unique design allows higher feeds and speeds, increasing Metal Removal Rates (MRR).
• Wide range of diameters from 0,3–25mm.
• AlTiN Coating for maximum wear resistance.
Centre Cutting
For plunging and
ramping.
Specialised Substrate
Toughness and wear resistance.
Cylindrical shank
Low runout.
Negative Geometry
Increased edge
strength. Necked shanks available
Extended reach in deep pockets.
High-Performance Solid Carbide End Mills •
Vision Plus
™
Vision Plus
WID_Master16_SolidEndMilling_HighPerformance_O156_O157_Metric_REBRAND.indd 156 11/12/15 9:56 AM
O157
LViWID M 16 S lidE dMilli Hi hP f O156 O157 M i REBRANDN b 122015915AM
widia.com
• Machine hardened materials up to 67 HRC.
• Long overall length for deep-reach applications.
• Reinforced core for better rigidity.
• High helix for better surface fi nishes.
Vision Plus™ Series
7N02 Series 423034 Series
• Centre cutting.
• 2-fl ute.
• 30° helix.
• Extended neck for long-reach
applications.
• JIS.
• Sharp corner.
• 0,3–3,1mm diameter range.
• Centre cutting.
• 2-fl ute.
• 30° helix.
• Ball nose.
• 0,5–3mm diameter range.
7N01 Series 7N21 Series
• Centre cutting.
• 2-fl ute.
• 30° helix.
• Ball nose.
• JIS.
• 0,3–6mm diameter range.
• Centre cutting.
• 2-fl ute.
• 30° helix.
• Ball nose.
• Extended neck for long-reach
applications.
• 0,5–3mm diameter range.
75N2 Series 422875 Series
• Centre cutting.
• 2-fl ute.
• 30° helix.
• Extended neck for long-reach
applications.
• 3–12mm diameter range.
• Centre cutting.
• 2-fl ute.
• 20° helix.
• Extended neck for long-reach
applications.
• Torus corner.
• 2–12mm diameter range.
7151 Series 7061 Series
• Centre cutting.
• 2-fl ute.
• 15° helix.
• Ball nose.
• 1–20mm diameter range.
• Centre cutting.
• 2-fl ute.
• 30° helix.
• Ball nose.
• Extended neck for long-reach
applications.
• 1–12mm diameter range.
(continued)
WID_Master16_SolidEndMilling_HighPerformance_O156_O157_Metric_REBRAND.indd 157 11/12/15 9:56 AM
O158
LViWID M 16 S lidE dMilli Hi hP f O158 O159 M i REBRANDN b 12 20159 16AM
widia.com
• Machine hardened materials up to 67 HRC.
• Long overall length for deep-reach applications.
• Reinforced core for better rigidity.
• High helix for better surface fi nishes.
Vision Plus™ Series
70N1 Series 422869 Series
• Centre cutting.
• 2-fl ute.
• 30° helix.
• Ball nose.
• Extended neck for long-reach
applications.
• 1–12mm diameter range.
• Centre cutting.
• 2-fl ute.
• 30° helix.
• Ball nose.
• Extended neck for long-reach
applications.
• 1–16mm diameter range.
422870 Series 422873 Series
• Centre cutting.
• 2-fl ute.
• 20° helix.
• Ball nose.
• Extended neck for long-reach
applications.
• 2–12mm diameter range.
• Centre cutting.
• 2-fl ute.
• 0° helix.
• Extended neck for long-reach
applications.
• 3–10mm diameter range.
7505 Series 7585 Series
• Centre cutting.
• 4-,5-, and 6-fl utes.
• 50° helix.
• Sharp corner.
• 3–25mm diameter range.
• Centre cutting.
• 4- and 5-fl utes.
• 50° helix.
• Radii corner.
• 3–25mm diameter range.
75N5 Series 75N8
• Centre cutting.
• 4- and 5-fl utes.
• 50° helix.
• Sharp corner and radii.
• Extended neck for long-reach
applications.
• 3–25mm diameter range.
• Centre cutting.
• 6-fl ute.
• 50° helix.
• JIS.
• Radii corner.
• Extended neck for long-reach
applications.
• 3–25mm diameter range.
(continued)
(continued)
WID_Master16_SolidEndMilling_HighPerformance_O158_O159_Metric_REBRAND.indd 158 11/12/15 9:56 AM
O159
LViWID M 16 S lidE dMilli Hi hP f O158 O159 M i REBRANDN b 122015916AM
widia.com
• Machine hardened materials up to 67 HRC.
• Long overall length for deep-reach applications.
• Reinforced core for better rigidity.
• High helix for better surface fi nishes.
Vision Plus™ Series
422876 422878 Series 7150 Series
• Centre cutting.
• 4-fl ute.
• 20° helix.
• Torus style.
• Extended neck for long-reach
applications.
• 4–12mm diameter range.
• Centre cutting.
• 4-fl ute.
• 15° helix.
• Ball nose.
• 2–20mm diameter range.
7050 7060 Series 422871 Series
• Centre cutting.
• 4-fl ute.
• 15° helix.
• Ball nose.
• Extended neck for long-reach
applications.
• 2–20mm diameter range.
• Centre cutting.
• 4-fl ute.
• 30° helix.
• Taper ball nose for extended reach.
• 3–10mm diameter range.
D618 Series 422837 422831 Series
• Centre cutting.
• 4- and 6-fl utes.
• 50° helix.
• Sharp corner.
• 3–20mm diameter range.
• Non-centre cutting.
• 6- and 8-fl utes.
• 45° helix.
• Radii corner.
• 6–25mm diameter range.
7670 Series
• Centre cutting.
• 3-, 4- and 6-fl utes.
• 45° helix.
• Radii corner.
• Rougher profi le.
• 4–mm diameter range.
(continued)
WID_Master16_SolidEndMilling_HighPerformance_O158_O159_Metric_REBRAND.indd 159 11/12/15 9:56 AM
O160
LViWID M 16 S lidE dMilli Hi hP f O160 O161 M i REBRANDO b 20 20154 07PM
widia.com
AlTiN-MJ1 TiAlN-RJ1
High-Performance Solid Carbide End Mills • Hard Materials
Series 7N02 • Vision Plus™ Micro
Series 7N02 7N12 7N22 • Vision Plus Micro
grade AlTiN-MJ1
AlTiN
order # catalogue #
grade TiAlN-RJ1
TiAlN
order # catalogue # D1 D D3
length of cut
Ap1 max L3
length
L
3321518 7N0200302MJ 2256390 7N0200302RJ 0,3 6 0,84 0,40 0,40 50
3321529 7N2200400MJ 2256438 7N2200400RJ 0,4 3 0,34 0,60 2,00 38
3321530 7N2200410MJ 2256439 7N2200410RJ 0,4 3 0,34 0,60 4,00 38
— 2256391 7N0200402RJ 0,4 6 0,84 0,60 0,60 50
3089244 7N0200402MJ — 0,4 6 — 0,60 0,60 50
3321531 7N2200500MJ 2256440 7N2200500RJ 0,5 3 0,44 0,70 2,00 38
3321532 7N2200510MJ 2256441 7N2200510RJ 0,5 3 0,44 0,70 4,00 38
3321533 7N2200520MJ 2256442 7N2200520RJ 0,5 3 0,44 0,70 6,00 38
3321519 7N0200502MJ 2256392 7N0200502RJ 0,5 6 0,44 0,70 1,50 50
3089248 7N1200502MJ 2256403 7N1200502RJ 0,5 6 0,44 0,70 2,50 60
3321534 7N2200600MJ 2256443 7N2200600RJ 0,6 3 0,54 0,90 2,00 38
3321535 7N2200610MJ 2256444 7N2200610RJ 0,6 3 0,54 0,90 4,00 38
3321536 7N2200620MJ 2256445 7N2200620RJ 0,6 3 0,54 0,90 6,00 38
3321520 7N0200602MJ 2256393 7N0200602RJ 0,6 6 0,54 0,90 1,80 50
3089249 7N1200602MJ 2256404 7N1200602RJ 0,6 6 0,54 0,90 3,00 60
3321537 7N2200701MJ 2256446 7N2200701RJ 0,7 4 0,64 1,00 2,00 50
3321538 7N2200711MJ 2256447 7N2200711RJ 0,7 4 0,64 1,00 4,00 50
3321539 7N2200721MJ 2256448 7N2200721RJ 0,7 4 0,64 1,00 6,00 50
3321540 7N2200801MJ 2256449 7N2200801RJ 0,8 4 0,74 1,20 4,00 50
3321541 7N2200811MJ 2256450 7N2200811RJ 0,8 4 0,74 1,20 6,00 50
3321542 7N2200821MJ 2256451 7N2200821RJ 0,8 4 0,74 1,20 8,00 50
3321521 7N0200802MJ 2256394 7N0200802RJ 0,8 6 0,74 1,20 2,40 50
3089250 7N1200802MJ 2256405 7N1200802RJ 0,8 6 0,74 1,20 4,00 60
3321543 7N2200901MJ 2256452 7N2200901RJ 0,9 4 0,84 1,35 6,00 50
L3
• Centre cutting.
• Standard items listed. Additional styles
and coatings made-to-order.
rst choice
alternate choice
End Mill Tolerances
D1 tolerance e8 D
tolerance h6
+ / -
) 3 -0,014/-0,028 ) 3 0/0,006
> 3–6 -0,020/-0,038 > 3–6 0/0,008
> 6–10 -0,025/-0,047 > 6–10 0/0,009
> 10–18 -0,032/-0,059 > 10–18 0/0,011
> 18–30 -0,040/-0,073 > 18–30 0/0,013
High-Performance Solid Carbide End Mills
(continued)
WID_Master16_SolidEndMilling_HighPerformance_O160_O161_Metric_REBRAND.indd 160 10/30/15 2:25 PM
O161
LViWID M 16 S lidE dMilli Hi hP f O160 O161 M i REBRANDO b 2020154 07PM
widia.com
AlTiN-MJ1 TiAlN-RJ1
High-Performance Solid Carbide End Mills • Hard Materials
Series 7N02 • Vision Plus™ Micro
grade AlTiN-MJ1
AlTiN
order # catalogue #
grade TiAlN-RJ1
TiAlN
order # catalogue # D1 D D3
length of cut
Ap1 max L3
length
L
3321544 7N2200911MJ 2256453 7N2200911RJ 0,9 4 0,84 1,35 8,00 50
3321545 7N2200921MJ 2256454 7N2200921RJ 0,9 4 0,84 1,35 10,00 50
3321546 7N2201001MJ 2256455 7N2201001RJ 1,0 4 0,94 1,50 6,00 50
3321547 7N2201011MJ 2256456 7N2201011RJ 1,0 4 0,94 1,50 8,00 50
3321548 7N2201021MJ 2256457 7N2201021RJ 1,0 4 0,94 1,50 10,00 50
3321549 7N2201031MJ 2256458 7N2201031RJ 1,0 4 0,94 1,50 12,00 50
3089245 7N0201002MJ 2256395 7N0201002RJ 1,0 6 0,94 1,50 2,50 50
3089251 7N1201002MJ 2256406 7N1201002RJ 1,0 6 0,94 1,50 5,00 60
3321550 7N2201201MJ 2256459 7N2201201RJ 1,2 4 1,14 1,50 6,00 50
3321551 7N2201211MJ 2256460 7N2201211RJ 1,2 4 1,14 1,80 8,00 50
3321552 7N2201221MJ 2256461 7N2201221RJ 1,2 4 1,14 1,80 10,00 50
3321553 7N2201231MJ 2256462 7N2201231RJ 1,2 4 1,14 1,80 12,00 50
3321522 7N0201202MJ 2256396 7N0201202RJ 1,2 6 1,14 1,80 3,00 50
3089252 7N1201202MJ 2256407 7N1201202RJ 1,2 6 1,14 1,80 6,00 60
3321554 7N2201401MJ 2256463 7N2201401RJ 1,4 4 1,34 2,10 6,00 50
3321555 7N2201411MJ 2256464 7N2201411RJ 1,4 4 1,34 2,10 8,00 50
3321556 7N2201421MJ — 1,4 4 1,34 2,10 10,00 50
3321557 7N2201431MJ 2256466 7N2201431RJ 1,4 4 1,34 2,10 12,00 50
3321558 7N2201441MJ 2256467 7N2201441RJ 1,4 4 1,34 2,10 16,00 50
— 2256465 7N2201421RJ 1,4 4 1,35 2,10 10,00 50
3089246 7N0201402MJ 2256397 7N0201402RJ 1,4 6 1,34 2,10 3,50 50
3321527 7N1201402MJ 2256408 7N1201402RJ 1,4 6 1,34 2,10 7,00 60
— 3454427 7N2201561RJ 1,5 4 1,44 2,30 5,70 50
3321559 7N2201501MJ 2256468 7N2201501RJ 1,5 4 1,44 2,30 6,00 50
3321560 7N2201511MJ 2256469 7N2201511RJ 1,5 4 1,44 2,30 10,00 50
3321561 7N2201521MJ 2256470 7N2201521RJ 1,5 4 1,44 2,30 12,00 50
3321562 7N2201531MJ 2256471 7N2201531RJ 1,5 4 1,44 2,30 16,00 50
3321563 7N2201541MJ 2256472 7N2201541RJ 1,5 4 1,44 2,30 18,00 63
3321564 7N2201551MJ 2256473 7N2201551RJ 1,5 4 1,44 2,30 20,00 63
3321523 7N0201502MJ 2256398 7N0201502RJ 1,5 6 1,44 2,30 3,80 50
3089253 7N1201502MJ 2256409 7N1201502RJ 1,5 6 1,44 2,30 7,50 60
3321566 7N2201611MJ 2256475 7N2201611RJ 1,6 4 1,54 2,40 10,00 50
3321567 7N2201621MJ 2256476 7N2201621RJ 1,6 4 1,54 2,40 12,00 50
3321568 7N2201631MJ 2256477 7N2201631RJ 1,6 4 1,54 2,40 16,00 50
3321569 7N2201641MJ 2256478 7N2201641RJ 1,6 4 1,54 2,40 20,00 63
— 3454428 7N2201571RJ 1,6 4 1,54 2,80 11,70 50
L3
rst choice
alternate choice
High-Performance Solid Carbide End Mills
(continued)
(Series 7N02 7N12 7N22 • Vision Plus Micro — continued)
WID_Master16_SolidEndMilling_HighPerformance_O160_O161_Metric_REBRAND.indd 161 10/30/15 2:25 PM
O162
LViWID M 16 S lidE dMilli Hi hP f O162 O163 M i REBRANDO b 20 20154 07PM
widia.com
AlTiN-MJ1 TiAlN-RJ1
High-Performance Solid Carbide End Mills • Hard Materials
Series 7N02 • Vision Plus™ Micro
L3
rst choice
alternate choice
High-Performance Solid Carbide End Mills
grade AlTiN-MJ1
AlTiN
order # catalogue #
grade TiAlN-RJ1
TiAlN
order # catalogue # D1 D D3
length of cut
Ap1 max L3
length
L
3321565 7N2201601MJ 2256474 7N2201601RJ 1,6 4 1,57 2,40 6,00 50
3321524 7N0201602MJ 2256399 7N0201602RJ 1,6 6 1,54 2,40 4,00 50
3321528 7N1201602MJ 2256410 7N1201602RJ 1,6 6 1,54 2,40 8,00 60
3321570 7N2201701MJ 2256479 7N2201701RJ 1,7 4 1,64 2,60 6,00 50
3321571 7N2201711MJ 2256480 7N2201711RJ 1,7 4 1,64 2,60 10,00 50
3321572 7N2201721MJ 2256481 7N2201721RJ 1,7 4 1,64 2,60 12,00 50
3321573 7N2201731MJ 2256482 7N2201731RJ 1,7 4 1,64 2,60 16,00 50
3321574 7N2201741MJ 2256483 7N2201741RJ 1,7 4 1,64 2,60 20,00 63
3321575 7N2201801MJ 2256484 7N2201801RJ 1,8 4 1,74 2,70 6,00 50
3321576 7N2201811MJ 2256485 7N2201811RJ 1,8 4 1,74 2,70 10,00 50
3321577 7N2201821MJ 2256486 7N2201821RJ 1,8 4 1,74 2,70 12,00 50
3321578 7N2201831MJ 2256487 7N2201831RJ 1,8 4 1,74 2,70 16,00 50
3321579 7N2201841MJ 2256488 7N2201841RJ 1,8 4 1,74 2,70 20,00 63
3321525 7N0201802MJ 2256400 7N0201802RJ 1,8 6 1,74 2,70 4,50 50
3089254 7N1201802MJ 2256411 7N1201802RJ 1,8 6 1,74 2,70 9,00 60
3321580 7N2201901MJ 2256489 7N2201901RJ 1,9 4 1,84 2,80 6,00 50
3321581 7N2201911MJ 2256490 7N2201911RJ 1,9 4 1,84 2,80 10,00 50
3321582 7N2201921MJ 2256491 7N2201921RJ 1,9 4 1,84 2,80 12,00 50
3321583 7N2201931MJ 2256492 7N2201931RJ 1,9 4 1,84 2,80 16,00 50
3321584 7N2201941MJ 2256493 7N2201941RJ 1,9 4 1,84 2,80 20,00 63
3321585 7N2202001MJ 2256494 7N2202001RJ 2,0 4 1,96 3,00 6,00 50
3321586 7N2202011MJ 2256495 7N2202011RJ 2,0 4 1,96 3,00 10,00 50
3321587 7N2202021MJ 2256496 7N2202021RJ 2,0 4 1,96 3,00 16,00 50
3321588 7N2202031MJ 2256497 7N2202031RJ 2,0 4 1,96 3,00 20,00 63
3321589 7N2202041MJ 2256498 7N2202041RJ 2,0 4 1,96 3,00 20,00 75
3089247 7N0202002MJ 2256401 7N0202002RJ 2,0 6 1,96 3,00 5,00 50
3089255 7N1202002MJ 2256412 7N1202002RJ 2,0 6 1,96 3,00 10,00 60
— 3454429 7N2202051RJ 2,1 4 2,00 3,00 8,00 50
— 3454430 7N2202061RJ 2,1 4 2,00 3,00 12,00 50
— 3454431 7N2202071RJ 2,1 4 2,00 3,00 14,00 50
— 3454432 7N2202091RJ 2,1 4 2,00 3,00 25,00 63
3321590 7N2202501MJ 2256499 7N2202501RJ 2,5 4 2,40 3,70 8,00 50
(continued)
(Series 7N02 • Series 7N02 7N12 7N22 • Vision Plus Micro — continued)
WID_Master16_SolidEndMilling_HighPerformance_O162_O163_Metric_REBRAND.indd 162 10/30/15 2:25 PM
O163
LViWID M 16 S lidE dMilli Hi hP f O162 O163 M i REBRANDO b 2020154 07PM
widia.com
AlTiN-MJ1 TiAlN-RJ1
High-Performance Solid Carbide End Mills • Hard Materials
Series 7N02 • Vision Plus™ Micro
L3
rst choice
alternate choice
High-Performance Solid Carbide End Mills
(Series 7N02 7N12 7N22 • Vision Plus Micro — continued)
grade AlTiN-MJ1
AlTiN
order # catalogue #
grade TiAlN-RJ1
TiAlN
order # catalogue # D1 D D3
length of cut
Ap1 max L3
length
L
3321591 7N2202511MJ 2256500 7N2202511RJ 2,5 4 2,40 3,70 10,00 50
3321592 7N2202521MJ 2256501 7N2202521RJ 2,5 4 2,44 3,70 16,00 63
3321593 7N2202531MJ 2256502 7N2202531RJ 2,5 4 2,44 3,70 20,00 63
3321594 7N2202541MJ 2256503 7N2202541RJ 2,5 4 2,44 3,70 30,00 80
3321526 7N0202502MJ 2256402 7N0202502RJ 2,5 6 2,44 3,70 5,00 50
3089256 7N1202502MJ 2256413 7N1202502RJ 2,5 6 2,44 3,70 12,50 60
3321595 7N2203002MJ 2256504 7N2203002RJ 3,0 6 2,94 4,50 8,00 50
3321596 7N2203012MJ 2256505 7N2203012RJ 3,0 6 2,94 4,50 10,00 50
3321597 7N2203022MJ 2256506 7N2203022RJ 3,0 6 2,94 4,50 16,00 63
3321598 7N2203032MJ 2256507 7N2203032RJ 3,0 6 2,94 4,50 20,00 63
3321599 7N2203042MJ 2256508 7N2203042RJ 3,0 6 2,94 4,50 20,00 80
— 3454433 7N2203052RJ 3,1 6 3,00 4,50 12,00 50
— 3454434 7N2203062RJ 3,1 6 3,00 4,50 25,00 76
WID_Master16_SolidEndMilling_HighPerformance_O162_O163_Metric_REBRAND.indd 163 10/30/15 2:25 PM
O164
LViWID M 16 S lidE dMilli Hi hP f O164 O165 M i REBRANDO b 20 20154 07PM
widia.com
K10UF-DCHP
High-Performance Solid Carbide End Mills • Hard Materials
Series 423034 • Vision Plus™ Micro
End Mill Tolerances
D1
tolerance h8
+ / - D
tolerance h6
+ / -
) 3 0/0,014 ) 3 0/0,006
> 3–6 0/0,018 > 3–6 0/0,008
> 6–10 0/0,022 > 6–10 0/0,009
> 10–18 0/0,027 > 10–18 0/0,011
> 18–30 0/0,033 > 18–30 0/0,013
Series 423034 • Vision Plus Micro
grade K10UF-DCHP
AlTiN
order # catalogue # D1 D
length of cut
Ap1 max
length
L
2343490 423034-000005 0,5 3 1,50 38
2343492 423034-000006 0,6 3 1,60 38
2343494 423034-000008 0,8 3 1,80 38
2343496 423034-000010 1,0 3 2,00 38
2343498 423034-000012 1,2 3 2,20 38
2343500 423034-000015 1,5 3 2,50 38
2343502 423034-000020 2,0 3 3,00 38
2343504 423034-000025 2,5 3 4,00 38
2343506 423034-000030 3,0 3 5,00 38
High-Performance Solid Carbide End Mills
• Centre cutting.
• Standard items listed. Additional styles
and coatings made-to-order.
rst choice
alternate choice
WID_Master16_SolidEndMilling_HighPerformance_O164_O165_Metric_REBRAND.indd 164 10/30/15 2:25 PM
O165
LViWID M 16 S lidE dMilli Hi hP f O164 O165 M i REBRANDO b 2020154 07PM
widia.com
AlTiN-MJ1 TiAlN-RJ1
High-Performance Solid Carbide End Mills • Hard Materials
Series 7N01 • Vision Plus™ Micro
Series 7N01 • Vision Plus Micro
grade AlTiN-MJ1
AlTiN
order # catalogue #
grade TiAlN-RJ1
TiAlN
order # catalogue # D1 D D3
length of cut
Ap1 max L3
length
L
3321510 7N0100302MJ 2256358 7N0100302RJ 0,3 6 — 0,30 0,30 50
3321511 7N0100402MJ 2256359 7N0100402RJ 0,4 6 — 0,40 0,40 50
3089237 7N0100502MJ 2256360 7N0100502RJ 0,5 6 0,45 0,50 1,50 50
3089238 7N0100602MJ 2256361 7N0100602RJ 0,6 6 0,55 0,60 1,80 50
3321512 7N0100802MJ 2256362 7N0100802RJ 0,8 6 0,75 0,80 2,40 50
3321513 7N0101002MJ 2256363 7N0101002RJ 1,0 6 0,95 2,50 2,50 50
3089239 7N0101202MJ 2256364 7N0101202RJ 1,2 6 1,15 1,20 3,00 50
3089240 7N0101402MJ 2256365 7N0101402RJ 1,4 6 1,35 1,40 3,50 50
3321514 7N0101502MJ 2256366 7N0101502RJ 1,5 6 1,45 1,50 3,80 50
3089241 7N0101602MJ 2256367 7N0101602RJ 1,6 6 1,55 1,60 4,00 50
3089242 7N0101802MJ 2256368 7N0101802RJ 1,8 6 1,75 1,80 4,50 50
3321515 7N0102002MJ 2256369 7N0102002RJ 2,0 6 1,95 2,00 5,00 50
3321516 7N0102502MJ 2256370 7N0102502RJ 2,5 6 2,40 2,50 5,00 50
3321517 7N0103002MJ 2256371 7N0103002RJ 3,0 6 2,85 3,00 6,00 50
3089243 7N0104002MJ 2256372 7N0104002RJ 4,0 6 3,85 4,00 6,00 50
3091240 7N0106002MJ 2256373 7N0106002RJ 6,0 6 5,85 6,00 9,00 50
• Centre cutting.
• Standard items listed. Additional styles
and coatings made-to-order.
rst choice
alternate choice
End Mill Tolerances
D1 tolerance e8 D
tolerance h6
+ / -
) 3 -0,014/-0,028 ) 3 0/0,006
> 3–6 -0,020/-0,038 > 3–6 0/0,008
> 6–10 -0,025/-0,047 > 6–10 0/0,009
> 10–18 -0,032/-0,059 > 10–18 0/0,011
> 18–30 -0,040/-0,073 > 18–30 0/0,013
High-Performance Solid Carbide End Mills
WID_Master16_SolidEndMilling_HighPerformance_O164_O165_Metric_REBRAND.indd 165 10/30/15 2:25 PM
O166
LViWID M 16 S lidE dMilli Hi hP f O166 O167 M i REBRANDO b 20 20154 07PM
widia.com
TiAlN - RT1
High-Performance Solid Carbide End Mills • Hard Materials
Series 7N21 • Vision Plus™ Micro
End Mill Tolerances
D1 tolerance e8 D
tolerance h6
+ / -
) 3 -0,014/-0,028 ) 3 0/0,006
> 3–6 -0,020/-0,038 > 3–6 0/0,008
> 6–10 -0,025/-0,047 > 6–10 0/0,009
> 10–18 -0,032/-0,059 > 10–18 0/0,011
> 18–30 -0,040/-0,073 > 18–30 0/0,013
Series 7N21 • Vision Plus Micro
grade TiAlN-RT1
TiAlN
order # catalogue # D1 D D3
length of cut
Ap1 max L3
length
L
3665122 7N2100501RT 0,5 4 0,44 1,00 5,00 63
3665140 7N2100601RT 0,6 4 0,54 1,00 6,00 63
3665141 7N2100801RT 0,8 4 0,74 1,30 8,00 63
3665142 7N2101001RT 1,0 4 0,94 1,60 10,00 63
3665163 7N2101201RT 1,2 4 1,14 1,90 12,00 63
3665164 7N2101501RT 1,5 4 1,44 2,40 16,00 63
3665166 7N2102001RT 2,0 4 1,94 3,20 20,00 63
3665167 7N2102501RT 2,5 4 2,44 3,80 25,00 63
3665168 7N2103001RT 3,0 4 2,90 4,50 30,00 63
High-Performance Solid Carbide End Mills
• Centre cutting.
• Standard items listed. Additional styles
and coatings made-to-order.
rst choice
alternate choice
WID_Master16_SolidEndMilling_HighPerformance_O166_O167_Metric_REBRAND.indd 166 10/30/15 2:25 PM
O167
LViWID M 16 S lidE dMilli Hi hP f O166 O167 M i REBRANDO b 2020154 07PM
widia.com
High-Performance Solid Carbide End Mills • Hard Materials
Application Data • Series 7N02 7N12 7N22 • Vision Plus™ Micro
High-Performance Solid Carbide End Mills
Series 7N02 7N12 7N22 • Vision Plus Micro
Material
Group
Side Milling (A)
and Slotting (B) AlTiN Recommended feed per tooth (fz = mm/th) for side milling (A).
For slotting (B), reduce fz by 20%.
AB
Cutting Speed
— vc
m/min
D1 — Diameter
ap ae ap min max mm 0,3 0,4 0,5 0,6 0,8 1,0 1,5 2,0 2,5 3,0
P
0
1,25 x D 0,25 x D 0,75 x D 150 – 200 fz 0,002 0,003 0,003 0,004 0,005 0,007 0,010 0,014 0,017 0,021
1
1,25 x D 0,25 x D 0,75 x D 150 – 200 fz 0,002 0,003 0,003 0,004 0,005 0,007 0,010 0,014 0,017 0,021
2
1,25 x D 0,25 x D 0,75 x D 140 – 190 fz 0,002 0,003 0,003 0,004 0,005 0,007 0,010 0,014 0,017 0,021
3
1,25 x D 0,25 x D 0,75 x D 120 – 160 fz 0,002 0,002 0,003 0,003 0,004 0,006 0,008 0,011 0,014 0,017
4
1,25 x D 0,25 x D 0,5 x D 90 – 150 fz 0,002 0,002 0,003 0,003 0,004 0,005 0,008 0,010 0,013 0,016
5
1,25 x D 0,25 x D 0,5 x D 60 – 100 fz 0,001 0,002 0,002 0,003 0,004 0,005 0,007 0,009 0,012 0,014
K1
1,25 x D 0,25 x D 0,75 x D 120 – 150 fz 0,002 0,003 0,003 0,004 0,005 0,007 0,010 0,014 0,017 0,021
2
1,25 x D 0,25 x D 0,5 x D 110 – 140 fz 0,002 0,002 0,003 0,003 0,004 0,006 0,008 0,011 0,014 0,017
H
1
1,25 x D 0,25 x D 0,5 x D 80 – 140 fz 0,002 0,002 0,003 0,003 0,004 0,005 0,008 0,010 0,013 0,016
2
1,25 x D 0,25 x D 0,3 x D 70 – 120 fz 0,001 0,002 0,002 0,002 0,003 0,004 0,006 0,008 0,010 0,012
3
1,25 x D 0,25 x D 0,25 x D 60 – 90 fz 0,001 0,001 0,002 0,002 0,002 0,003 0,005 0,006 0,008 0,009
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group.
For tools with reach > 3 x D, reduce fz by 20%.
For tools with reach > 5 x D, reduce fz by 30%.
WID_Master16_SolidEndMilling_HighPerformance_O166_O167_Metric_REBRAND.indd 167 10/30/15 2:25 PM
O168
LViWID M 16 S lidE dMilli Hi hP f O168 O169 M i REBRANDO b 30 20151 51PM
widia.com
High-Performance Solid Carbide End Mills • Hard Materials
Application Data • Series 423034 • Vision Plus™ Micro
High-Performance Solid Carbide End Mills
Series 423034 • Vision Plus Micro
Material
Group
Profile Milling K10UF-DCHP Recommended feed per tooth (fz = mm/th) for 3D milling/proling (A) — Roughing
AlTiN
ACutting Speed — vc
m/min D1 — Diameter
ap ae min max mm 0,5 0,6 0,8 1,0 1,5 2,0 2,5 3,0
P3
0,2 x D 0,1 x D 216 - 288 fz 0,004 0,005 0,007 0,008 0,013 0,017 0,021 0,026
4
0,2 x D 0,1 x D 162 - 270 fz 0,004 0,005 0,006 0,008 0,012 0,016 0,020 0,024
H
1
0,15 x D 0,1 x D 144 - 252 fz 0,004 0,005 0,006 0,008 0,012 0,016 0,020 0,024
2
0,1 x D 0,075 x D 126 - 216 fz 0,003 0,004 0,005 0,006 0,009 0,012 0,015 0,018
3
0,05 x D 0,05 x D 108 - 162 fz 0,002 0,003 0,004 0,005 0,007 0,009 0,012 0,014
4
0,05 x D 0,05 x D 90 - 126 fz 0,002 0,002 0,002 0,003 0,005 0,006 0,008 0,009
Material
Group
Profile Milling K10UF-DCHP Recommended feed per tooth (fz = mm/th) for 3D milling/proling (A) — Semi-Finishing
AlTiN
ACutting Speed — vc
m/min D1 — Diameter
ap ae min max mm 0,5 0,6 0,8 1,0 1,5 2,0 2,5 3,0
P3
0,1 x D 0,05 x D 300 - 400 fz 0,008 0,010 0,013 0,017 0,025 0,034 0,043 0,052
4
0,1 x D 0,05 x D 225 - 375 fz 0,008 0,009 0,012 0,016 0,023 0,031 0,040 0,048
H
1
0,07 x D 0,1 x D 200 - 350 fz 0,008 0,009 0,012 0,016 0,023 0,031 0,040 0,048
2
0,05 x D 0,04 x D 175 - 300 fz 0,006 0,007 0,009 0,012 0,018 0,024 0,030 0,036
3
0,03 x D 0,03 x D 150 - 225 fz 0,005 0,006 0,007 0,009 0,014 0,019 0,024 0,028
4
0,03 x D 0,03 x D 125 - 175 fz 0,003 0,004 0,005 0,006 0,009 0,012 0,016 0,019
Material
Group
Profile Milling K10UF-DCHP Recommended feed per tooth (fz = mm/th) for 3D milling/proling (A) — Finishing
AlTiN
ACutting Speed — vc
m/min D1 — Diameter
ap ae min max mm 0,5 0,6 0,8 1,0 1,5 2,0 2,5 3,0
P3
0,04 x D 0,04 x D 432 – 576 fz 0,012 0,015 0,020 0,025 0,038 0,051 0,064 0,078
4
0,04 x D 0,04 x D 324 – 540 fz 0,012 0,014 0,019 0,023 0,035 0,047 0,059 0,072
H
1
0,03 x D 0,03 x D 288 – 504 fz 0,012 0,014 0,019 0,023 0,035 0,047 0,059 0,072
2
0,03 x D 0,03 x D 252 – 432 fz 0,009 0,011 0,014 0,018 0,027 0,036 0,045 0,054
3
0,02 x D 0,02 x D 216 – 324 fz 0,007 0,008 0,011 0,014 0,021 0,028 0,035 0,043
4
0,02 x D 0,02 x D 180 – 252 fz 0,005 0,006 0,007 0,009 0,014 0,019 0,024 0,028
NOTE: Please use reference table for correction of vc based on average degrees of the mould. See page O205.
WID_Master16_SolidEndMilling_HighPerformance_O168_O169_Metric_REBRAND.indd 168 11/3/15 10:40 AM
O169
LViWID M 16 S lidE dMilli Hi hP f O168 O169 M i REBRANDO b 3020151 51PM
widia.com
High-Performance Solid Carbide End Mills • Hard Materials
Application Data • Series 7N01 • Vision Plus™ Micro
High-Performance Solid Carbide End Mills
Series 7N01 • Vision Plus Micro
Material
Group
Profile Milling K10UF-DCHP Recommended feed per tooth (fz = mm/th) for 3D milling/proling (A) — Roughing
AlTiN
ACutting Speed — vc
m/min D1 — Diameter
ap ae min max mm 0,5 0,6 0,8 1,0 1,5 2,0 2,5 3,0
P3
0,2 x D 0,1 x D 216 - 288 fz 0,004 0,005 0,007 0,008 0,013 0,017 0,021 0,026
4
0,2 x D 0,1 x D 162 - 270 fz 0,004 0,005 0,006 0,008 0,012 0,016 0,020 0,024
H
1
0,15 x D 0,1 x D 144 - 252 fz 0,004 0,005 0,006 0,008 0,012 0,016 0,020 0,024
2
0,1 x D 0,075 x D 126 - 216 fz 0,003 0,004 0,005 0,006 0,009 0,012 0,015 0,018
3
0,05 x D 0,05 x D 108 - 162 fz 0,002 0,003 0,004 0,005 0,007 0,009 0,012 0,014
4
0,05 x D 0,05 x D 90 - 126 fz 0,002 0,002 0,002 0,003 0,005 0,006 0,008 0,009
Material
Group
Profile Milling K10UF-DCHP Recommended feed per tooth (fz = mm/th) for 3D milling/proling (A) — Semi-Finishing
AlTiN
ACutting Speed — vc
m/min D1 — Diameter
ap ae min max mm 0,5 0,6 0,8 1,0 1,5 2,0 2,5 3,0
P3
0,1 x D 0,05 x D 300 - 400 fz 0,008 0,010 0,013 0,017 0,025 0,034 0,043 0,052
4
0,1 x D 0,05 x D 225 - 375 fz 0,008 0,009 0,012 0,016 0,023 0,031 0,040 0,048
H
1
0,07 x D 0,1 x D 200 - 350 fz 0,008 0,009 0,012 0,016 0,023 0,031 0,040 0,048
2
0,05 x D 0,04 x D 175 - 300 fz 0,006 0,007 0,009 0,012 0,018 0,024 0,030 0,036
3
0,03 x D 0,03 x D 150 - 225 fz 0,005 0,006 0,007 0,009 0,014 0,019 0,024 0,028
4
0,03 x D 0,03 x D 125 - 175 fz 0,003 0,004 0,005 0,006 0,009 0,012 0,016 0,019
Material
Group
Profile Milling K10UF-DCHP Recommended feed per tooth (fz = mm/th) for 3D milling/proling (A) — Finishing
AlTiN
ACutting Speed — vc
m/min D1 — Diameter
ap ae min max mm 0,5 0,6 0,8 1,0 1,5 2,0 2,5 3,0
P3
0,04 x D 0,04 x D 432 – 576 fz 0,012 0,015 0,020 0,025 0,038 0,051 0,064 0,078
4
0,04 x D 0,04 x D 324 – 540 fz 0,012 0,014 0,019 0,023 0,035 0,047 0,059 0,072
H
1
0,03 x D 0,03 x D 288 – 504 fz 0,012 0,014 0,019 0,023 0,035 0,047 0,059 0,072
2
0,03 x D 0,03 x D 252 – 432 fz 0,009 0,011 0,014 0,018 0,027 0,036 0,045 0,054
3
0,02 x D 0,02 x D 216 – 324 fz 0,007 0,008 0,011 0,014 0,021 0,028 0,035 0,043
4
0,02 x D 0,02 x D 180 – 252 fz 0,005 0,006 0,007 0,009 0,014 0,019 0,024 0,028
NOTE: Please use reference table for correction of vc based on average degrees of the mould. See page O205.
WID_Master16_SolidEndMilling_HighPerformance_O168_O169_Metric_REBRAND.indd 169 11/3/15 10:40 AM
O170
LViWID M 16 S lidE dMilli Hi hP f O170 O171 M i REBRANDN b 13 20154 02PM
widia.com
LViWID M 16 S lidE dMilli Hi hP f O170 O171 M i REBRANDN b 13 20154 02PM
High-Performance Solid Carbide End Mills • Hard Materials
Application Data • Series 7N21 • Vision Plus™ Micro
High-Performance Solid Carbide End Mills
Series 7N21 • Vision Plus Micro
Material
Group
Profile Milling K10UF-DCHP Recommended feed per tooth (fz = mm/th) for 3D milling/proling (A) — Roughing
AlTiN
ACutting Speed — vc
m/min D1 — Diameter
ap ae min max mm 0,5 0,6 0,8 1,0 1,5 2,0 2,5 3,0
P3
0,2 x D 0,1 x D 216 - 288 fz 0,004 0,005 0,007 0,008 0,013 0,017 0,021 0,026
4
0,2 x D 0,1 x D 162 - 270 fz 0,004 0,005 0,006 0,008 0,012 0,016 0,020 0,024
H
1
0,15 x D 0,1 x D 144 - 252 fz 0,004 0,005 0,006 0,008 0,012 0,016 0,020 0,024
2
0,1 x D 0,075 x D 126 - 216 fz 0,003 0,004 0,005 0,006 0,009 0,012 0,015 0,018
3
0,05 x D 0,05 x D 108 - 162 fz 0,002 0,003 0,004 0,005 0,007 0,009 0,012 0,014
4
0,05 x D 0,05 x D 90 - 126 fz 0,002 0,002 0,002 0,003 0,005 0,006 0,008 0,009
Material
Group
Profile Milling K10UF-DCHP Recommended feed per tooth (fz = mm/th) for 3D milling/proling (A) — Semi-Finishing
AlTiN
ACutting Speed — vc
m/min D1 — Diameter
ap ae min max mm 0,5 0,6 0,8 1,0 1,5 2,0 2,5 3,0
P3
0,1 x D 0,05 x D 300 - 400 fz 0,008 0,010 0,013 0,017 0,025 0,034 0,043 0,052
4
0,1 x D 0,05 x D 225 - 375 fz 0,008 0,009 0,012 0,016 0,023 0,031 0,040 0,048
H
1
0,07 x D 0,1 x D 200 - 350 fz 0,008 0,009 0,012 0,016 0,023 0,031 0,040 0,048
2
0,05 x D 0,04 x D 175 - 300 fz 0,006 0,007 0,009 0,012 0,018 0,024 0,030 0,036
3
0,03 x D 0,03 x D 150 - 225 fz 0,005 0,006 0,007 0,009 0,014 0,019 0,024 0,028
4
0,03 x D 0,03 x D 125 - 175 fz 0,003 0,004 0,005 0,006 0,009 0,012 0,016 0,019
Material
Group
Profile Milling K10UF-DCHP Recommended feed per tooth (fz = mm/th) for 3D milling/proling (A) — Finishing
AlTiN
ACutting Speed — vc
m/min D1 — Diameter
ap ae min max mm 0,5 0,6 0,8 1,0 1,5 2,0 2,5 3,0
P3
0,04 x D 0,04 x D 432 – 576 fz 0,012 0,015 0,020 0,025 0,038 0,051 0,064 0,078
4
0,04 x D 0,04 x D 324 – 540 fz 0,012 0,014 0,019 0,023 0,035 0,047 0,059 0,072
H
1
0,03 x D 0,03 x D 288 – 504 fz 0,012 0,014 0,019 0,023 0,035 0,047 0,059 0,072
2
0,03 x D 0,03 x D 252 – 432 fz 0,009 0,011 0,014 0,018 0,027 0,036 0,045 0,054
3
0,02 x D 0,02 x D 216 – 324 fz 0,007 0,008 0,011 0,014 0,021 0,028 0,035 0,043
4
0,02 x D 0,02 x D 180 – 252 fz 0,005 0,006 0,007 0,009 0,014 0,019 0,024 0,028
NOTE: Please use reference table for correction of vc based on averages degree of the mould. See page O205.
WID_Master16_SolidEndMilling_HighPerformance_O170_O171_Metric_REBRAND.indd 170 11/13/15 4:24 PM
Being as productive and profi table as possible is your fundamental goal. With the addition of NOVO™ to your team,
your goal can be achieved. NOVO possesses powerful digital tools that link together process planning, inventory
availability and purchase, cost-per-part management, and productivity improvements.
NOVO can ensure you have the right tools on your machines, in the right sequence. Resulting in fl awless execution
that accelerates every job, and maximises every shift. widia.com/novo
NOVO KNOWS ART TO PART TO PROFIT
01
WID_Master16_SolidEndMilling_HighPerformance_O170_O171_Metric_REBRAND.indd 171 11/13/15 4:24 PM
O172
LViWID M 16 S lidE dMilli Hi hP f O172 O173 M i REBRANDN b 11 20158 54AM
widia.com
TiAlN - RT1
High-Performance Solid Carbide End Mills • Hard Materials
Series 75N2 • Vision Plus™
Series 75N2 • Vision Plus
grade TiAlN-RT1
TiAlN
order # catalogue # D1 D D3
length of cut
Ap1 max L3
length
LR¡
2544530 75N203022RT 3,0 6 2,80 3,00 9,00 75 0,30
2544735 75N203042RT 3,0 6 2,80 3,00 9,00 75 0,50
2544736 75N203062RT 3,0 6 2,80 3,00 9,00 75 1,00
2544737 75N204022RT 4,0 6 3,70 4,00 12,00 75 0,30
2544738 75N204042RT 4,0 6 3,70 4,00 12,00 75 0,50
2544739 75N204062RT 4,0 6 3,70 4,00 12,00 75 1,00
2544740 75N205022RT 5,0 6 4,60 5,00 15,00 75 0,30
2544741 75N205042RT 5,0 6 4,60 5,00 15,00 75 1,00
2544742 75N206032RT 6,0 6 5,50 6,00 18,00 75 0,30
2545163 75N206042RT 6,0 6 5,50 6,00 18,00 75 0,50
2545164 75N206052RT 6,0 6 5,50 6,00 18,00 75 0,75
2545166 75N206062RT 6,0 6 5,50 6,00 18,00 75 1,00
2545167 75N206072RT 6,0 6 5,50 6,00 18,00 75 1,50
2545168 75N208023RT 8,0 8 7,40 8,00 24,00 100 0,50
2545169 75N208043RT 8,0 8 7,40 8,00 24,00 100 1,00
2545170 75N208063RT 8,0 8 7,40 8,00 24,00 100 1,50
2545171 75N210024RT 10,0 10 9,20 10,00 30,00 100 0,50
2545172 75N210034RT 10,0 10 9,20 10,00 30,00 100 0,75
2545183 75N210044RT 10,0 10 9,20 10,00 30,00 100 1,00
2545184 75N210064RT 10,0 10 9,20 10,00 30,00 100 2,00
2545185 75N212025RT 12,0 12 11,00 12,00 36,00 125 0,50
2545186 75N212035RT 12,0 12 11,00 12,00 36,00 125 0,75
2545187 75N212045RT 12,0 12 11,00 12,00 36,00 125 1,00
2545188 75N212055RT 12,0 12 11,00 12,00 36,00 125 1,50
2545189 75N212065RT 12,0 12 11,00 12,00 36,00 125 2,00
• Centre cutting.
• Standard items listed. Additional styles
and coatings made-to-order.
rst choice
alternate choice
End Mill Tolerances
D1 tolerance e8 D
tolerance h6
+ / -
) 3 -0,014/-0,028 ) 3 0/0,006
> 3–6 -0,020/-0,038 > 3–6 0/0,008
> 6–10 -0,025/-0,047 > 6–10 0/0,009
> 10–18 -0,032/-0,059 > 10–18 0/0,011
> 18–30 -0,040/-0,073 > 18–30 0/0,013
High-Performance Solid Carbide End Mills
WID_Master16_SolidEndMilling_HighPerformance_O172_O173_Metric_REBRAND.indd 172 11/11/15 9:37 AM
O173
LViWID M 16 S lidE dMilli Hi hP f O172 O173 M i REBRANDN b 112015854AM
widia.com
K10UF-DCHP
High-Performance Solid Carbide End Mills • Hard Materials
Series 422875 • Vision Plus™
Series 422875 • Vision Plus
grade K10UF-DCHP
AlTiN
order # catalogue # D1 D D3
length of cut
Ap1 max L3
length
LR¡
2343319 422875-002003 2,0 6 1,90 2,00 17,50 70 0,30
2343303 422875-002005 2,0 6 1,90 2,00 17,50 70 0,50
2343305 422875-003005 3,0 6 2,90 3,00 18,50 70 0,50
2343321 422875-003010 3,0 6 2,90 3,00 18,50 70 1,00
2343307 422875-004005 4,0 6 3,80 4,00 19,50 80 0,50
2343323 422875-004010 4,0 6 3,80 4,00 19,50 80 1,00
2343309 422875-005005 5,0 6 4,80 5,00 42,00 80 0,50
2343325 422875-005010 5,0 6 4,80 5,00 42,00 80 1,00
2343327 422875-006005 6,0 6 5,80 6,00 42,00 80 0,50
2343311 422875-006010 6,0 6 5,80 6,00 42,00 80 1,00
2629541 422875-008005 8,0 8 7,80 8,00 51,00 90 0,50
2343329 422875-008010 8,0 8 7,80 8,00 51,00 90 1,00
2629555 422875-008015 8,0 8 7,80 8,00 51,00 90 1,50
2343313 422875-008020 8,0 8 7,80 8,00 51,00 90 2,00
2629559 422875-010005 10,0 10 9,70 10,00 57,00 100 0,50
2629560 422875-010010 10,0 10 9,70 10,00 57,00 100 1,00
3048961 422875-010015 10,0 10 9,70 10,00 57,00 100 1,50
2343331 422875-010020 10,0 10 9,70 10,00 57,00 100 2,00
2343315 422875-010030 10,0 10 9,70 10,00 57,00 100 3,00
2629561 422875-012005 12,0 12 11,70 12,00 62,00 110 0,50
2629573 422875-012010 12,0 12 11,70 12,00 62,00 110 1,00
2343333 422875-012030 12,0 12 11,70 12,00 62,00 110 3,00
2343317 422875-012040 12,0 12 11,70 12,00 62,00 110 4,00
Larger than 4mm
• Centre cutting.
• Standard items listed. Additional styles
and coatings made-to-order.
rst choice
alternate choice
High-Performance Solid Carbide End Mills
End Mill Tolerances
D1
tolerance h8
+ / - D
tolerance h6
+ / -
) 3 0/0,014 ) 3 0/0,006
> 3–6 0/0,018 > 3–6 0/0,008
> 6–10 0/0,022 > 6–10 0/0,009
> 10–18 0/0,027 > 10–18 0/0,011
> 18–30 0/0,033 > 18–30 0/0,013
WID_Master16_SolidEndMilling_HighPerformance_O172_O173_Metric_REBRAND.indd 173 11/11/15 9:38 AM
O174
LViWID M 16 S lidE dMilli Hi hP f O174 O175 M i REBRANDO b 20 20154 05PM
widia.com
TiAlN-RT1
High-Performance Solid Carbide End Mills • Hard Materials
Series 7151 • Vision Plus™
End Mill Tolerances
D1 tolerance e8 D
tolerance h6
+ / -
) 3 -0,014/-0,028 ) 3 0/0,006
> 3–6 -0,020/-0,038 > 3–6 0/0,008
> 6–10 -0,025/-0,047 > 6–10 0/0,009
> 10–18 -0,032/-0,059 > 10–18 0/0,011
> 18–30 -0,040/-0,073 > 18–30 0/0,013
Series 7151 • Vision Plus
grade TiAlN-RT1
TiAlN
order # catalogue # D1 D
length of cut
Ap1 max
length
L
1860036 715101000RT 1,0 3 3,00 38
1860090 715102000RT 2,0 3 3,00 38
1860103 715102500RT 2,5 3 3,00 38
1860106 715103000RT 3,0 3 3,00 38
1860109 715104001RT 4,0 4 4,00 50
1860111 715105001RT 5,0 5 5,00 50
1860112 715106002RT 6,0 6 6,00 50
1860133 715108003RT 8,0 8 8,00 63
1860134 715110004RT 10,0 10 10,00 76
1860135 715112005RT 12,0 12 12,00 76
1860136 715116006RT 16,0 16 16,00 89
1860137 715120007RT 20,0 20 20,00 104
High-Performance Solid Carbide End Mills
• Centre cutting.
• Standard items listed. Additional styles
and coatings made-to-order.
rst choice
alternate choice
WID_Master16_SolidEndMilling_HighPerformance_O174_O175_Metric_REBRAND.indd 174 10/30/15 2:26 PM
O175
LViWID M 16 S lidE dMilli Hi hP f O174 O175 M i REBRANDO b 2020154 05PM
widia.com
TiAlN - RT1
High-Performance Solid Carbide End Mills • Hard Materials
Series 7061 • Vision Plus™
grade TiAlN-RT1
TiAlN
order # catalogue # D1 D
length of cut
Ap1 max
length
L BETA
2495994 706101001RT 1,0 4 1,00 63 3.50
2495995 706102001RT 2,0 4 2,00 63 3.50
2495996 706102501RT 2,5 4 2,50 63 3.00
2495997 706103002RT 3,0 6 3,00 75 1.50
2495998 706104002RT 4,0 6 4,00 75 1.50
2495999 706105002RT 5,0 6 5,00 75 1.50
2496000 706106004RT 6,0 10 6,00 100 1.50
2496001 706108004RT 8,0 10 8,00 100 1.50
2496002 706110005RT 10,0 12 10,00 125 1.50
2496023 706112006RT 12,0 16 12,00 125 1.50
• Centre cutting.
• Standard items listed. Additional styles
and coatings made-to-order.
rst choice
alternate choice
End Mill Tolerances
D1 tolerance e8 D
tolerance h6
+ / -
) 3 -0,014/-0,028 ) 3 0/0,006
> 3–6 -0,020/-0,038 > 3–6 0/0,008
> 6–10 -0,025/-0,047 > 6–10 0/0,009
> 10–18 -0,032/-0,059 > 10–18 0/0,011
> 18–30 -0,040/-0,073 > 18–30 0/0,013
High-Performance Solid Carbide End Mills
Series 7061 • Vision Plus
WID_Master16_SolidEndMilling_HighPerformance_O174_O175_Metric_REBRAND.indd 175 10/30/15 2:26 PM
O176
LViWID M 16 S lidE dMilli Hi hP f O176 O177 M i REBRANDO b 20 20154 05PM
widia.com
TiAlN - RT1
High-Performance Solid Carbide End Mills • Hard Materials
Series 70N1 • Vision Plus™
End Mill Tolerances
D1 tolerance e8 D
tolerance h6
+ / -
) 3 -0,014/-0,028 ) 3 0/0,006
> 3–6 -0,020/-0,038 > 3–6 0/0,008
> 6–10 -0,025/-0,047 > 6–10 0/0,009
> 10–18 -0,032/-0,059 > 10–18 0/0,011
> 18–30 -0,040/-0,073 > 18–30 0/0,013
Series 70N1 • Vision Plus
grade TiAlN-RT1
TiAlN
order # catalogue # D1 D D3
length of cut
Ap1 max L3
length
L
2545190 70N101001RT 1,0 4 0,80 1,00 3,00 63
2545191 70N101501RT 1,5 4 1,30 1,50 4,50 63
2545192 70N102002RT 2,0 6 1,80 2,00 6,00 76
2545213 70N103002RT 3,0 6 2,80 3,00 9,00 76
2545214 70N104002RT 4,0 6 3,70 4,00 12,00 76
2545215 70N105002RT 5,0 6 4,60 5,00 15,00 76
2545216 70N106002RT 6,0 6 5,50 6,00 18,00 76
2545217 70N108003RT 8,0 8 7,50 8,00 24,00 100
2545218 70N110004RT 10,0 10 9,50 10,00 30,00 100
2545219 70N112005RT 12,0 12 11,50 12,00 36,00 125
High-Performance Solid Carbide End Mills
• Centre cutting.
• Standard items listed. Additional styles
and coatings made-to-order.
rst choice
alternate choice
WID_Master16_SolidEndMilling_HighPerformance_O176_O177_Metric_REBRAND.indd 176 10/30/15 2:26 PM
O177
LViWID M 16 S lidE dMilli Hi hP f O176 O177 M i REBRANDO b 2020154 05PM
widia.com
K10UF-DCHP
High-Performance Solid Carbide End Mills • Hard Materials
Series 422869 422868 • Vision Plus™
Series 422869 422868 • Vision Plus
grade K10UF-DCHP
AlTiN
order # catalogue # D1 D
length of cut
Ap1 max
length
L BETA
2343179 422869-000010 1,0 4 1,00 40 7.50
2343183 422869-000020 2,0 6 2,00 45 7.50
2343186 422869-000030 3,0 6 3,00 45 7.50
2343188 422869-000040 4,0 6 4,00 45 7.50
2343190 422869-000050 5,0 6 5,00 50 7.50
2343169 422868-000060 6,0 6 6,00 80 —
2343192 422869-000060 6,0 6 6,00 50 —
2343171 422868-000080 8,0 8 8,00 90 —
2343194 422869-000080 8,0 8 8,00 60 —
2343173 422868-000100 10,0 10 10,00 100 —
2343196 422869-000100 10,0 10 10,00 70 —
2343198 422869-000120 12,0 12 12,00 75 —
2343200 422869-000160 16,0 16 16,00 80 —
• Centre cutting.
• Standard items listed. Additional styles
and coatings made-to-order.
rst choice
alternate choice
End Mill Tolerances
D1
tolerance h8
+ / - D
tolerance h6
+ / -
) 3 0/0,014 ) 3 0/0,006
> 3–6 0/0,018 > 3–6 0/0,008
> 6–10 0/0,022 > 6–10 0/0,009
> 10–18 0/0,027 > 10–18 0/0,011
> 18–30 0/0,033 > 18–30 0/0,013
High-Performance Solid Carbide End Mills
WID_Master16_SolidEndMilling_HighPerformance_O176_O177_Metric_REBRAND.indd 177 10/30/15 2:26 PM
O178
LViWID M 16 S lidE dMilli Hi hP f O178 O179 M i REBRANDO b 20 20154 09PM
widia.com
K10UF-DCHP
High-Performance Solid Carbide End Mills • Hard Materials
Series 422870 • Vision Plus™
End Mill Tolerances
D1
tolerance h8
+ / - D
tolerance h6
+ / -
) 3 0/0,014 ) 3 0/0,006
> 3–6 0/0,018 > 3–6 0/0,008
> 6–10 0/0,022 > 6–10 0/0,009
> 10–18 0/0,027 > 10–18 0/0,011
> 18–30 0/0,033 > 18–30 0/0,013
Series 422870 • Vision Plus
grade K10UF-DCHP
AlTiN
order # catalogue # D1 D D3
length of cut
Ap1 max L3
length
L
2343202 422870-000020 2,0 6 1,90 2,00 17,50 70
2343204 422870-000030 3,0 6 2,90 3,00 18,50 70
2343206 422870-000040 4,0 6 3,80 4,00 19,50 80
2343208 422870-000050 5,0 6 4,80 5,00 39,00 80
2343210 422870-000060 6,0 6 5,80 6,00 42,00 80
2343212 422870-000080 8,0 8 7,80 8,00 52,00 90
2343214 422870-000100 10,0 10 9,70 10,00 58,00 100
2343216 422870-000120 12,0 12 11,70 12,00 63,00 110
High-Performance Solid Carbide End Mills
Diameter 4mm
• Centre cutting.
• Standard items listed. Additional styles
and coatings made-to-order.
rst choice
alternate choice
WID_Master16_SolidEndMilling_HighPerformance_O178_O179_Metric_REBRAND.indd 178 10/30/15 2:26 PM
O179
LViWID M 16 S lidE dMilli Hi hP f O178 O179 M i REBRANDO b 2020154 09PM
widia.com
K10UF-DCHP
High-Performance Solid Carbide End Mills • Hard Materials
Series 422873 • Vision Plus™
Series 422873 • Vision Plus
grade K10UF-DCHP
AlTiN
order # catalogue # D1 D
length of cut
Ap1 max
length
L BETA
2343265 422873-050100 5,0 8 6,00 100 1.75
2343269 422873-060100 6,0 10 8,00 100 2.52
2343275 422873-100100 10,0 12 15,00 100 1.83
2343277 422873-100150 10,0 12 15,00 150 0.80
Diameter 4mm
• Centre cutting.
• Standard items listed. Additional styles
and coatings made-to-order.
rst choice
alternate choice
End Mill Tolerances
D1
tolerance h10
+ / - D
tolerance h6
+ / -
) 3 0/0,040 ) 3 0/0,006
> 3–6 0/0,048 > 3–6 0/0,008
> 6–10 0/0,058 > 6–10 0/0,009
> 10–18 0/0,070 > 10–18 0/0,011
> 18–30 0/0,084 > 18–30 0/0,013
High-Performance Solid Carbide End Mills
WID_Master16_SolidEndMilling_HighPerformance_O178_O179_Metric_REBRAND.indd 179 10/30/15 2:26 PM
O180
LViWID M 16 S lidE dMilli Hi hP f O180 O181 M i REBRANDO b 20 20154 09PM
widia.com
TiAlN - LT1
High-Performance Solid Carbide End Mills • Hard Materials
Series 7505 7515 7525 7545 • Vision Plus™
Series 7505 7515 7525 7545 • Vision Plus
grade TiAlN-LT1
TiAlN
order # catalogue # D1 D
length of cut
Ap1 max
length
LZU
2499570 754503002LT 3,0 6 4,50 50 4
2499567 750503002LT 3,0 6 4,50 57 4
2499571 754504002LT 4,0 6 6,00 50 4
2499568 750504002LT 4,0 6 6,00 57 4
2499572 754505002LT 5,0 6 7,50 50 4
2499569 750505002LT 5,0 6 7,50 76 4
1848805 754506002LT 6,0 6 9,00 50 4
1724468 751506002LT 6,0 6 15,00 76 4
1724487 752506002LT 6,0 6 21,00 76 4
1860603 754508003LT 8,0 8 12,00 63 4
1724463 750508003LT 8,0 8 12,00 100 4
1724469 751508003LT 8,0 8 20,00 100 4
1724489 752508003LT 8,0 8 28,00 100 4
1860604 754510004LT 10,0 10 15,00 76 4
1724464 750510004LT 10,0 10 15,00 100 4
1724481 751510004LT 10,0 10 25,00 100 5
1724490 752510004LT 10,0 10 35,00 100 5
1860605 754512005LT 12,0 12 18,00 76 4
1724465 750512005LT 12,0 12 18,00 125 4
1724482 751512005LT 12,0 12 30,00 125 6
L
D1 D
• Centre cutting.
• Standard items listed. Additional styles
and coatings made-to-order.
rst choice
alternate choice
End Mill Tolerances
D1 tolerance e8 D
tolerance h6
+ / -
) 3 -0,014/-0,028 ) 3 0/0,006
> 3–6 -0,020/-0,038 > 3–6 0/0,008
> 6–10 -0,025/-0,047 > 6–10 0/0,009
> 10–18 -0,032/-0,059 > 10–18 0/0,011
> 18–30 -0,040/-0,073 > 18–30 0/0,013
High-Performance Solid Carbide End Mills
(continued)
WID_Master16_SolidEndMilling_HighPerformance_O180_O181_Metric_REBRAND.indd 180 10/30/15 2:26 PM
O181
LViWID M 16 S lidE dMilli Hi hP f O180 O181 M i REBRANDO b 2020154 09PM
widia.com
TiAlN - LT1
High-Performance Solid Carbide End Mills • Hard Materials
Series 7505 7515 7525 7545 • Vision Plus™
grade TiAlN-LT1
TiAlN
order # catalogue # D1 D
length of cut
Ap1 max
length
LZU
1724531 752512005LT 12,0 12 42,00 125 6
1860606 754516006LT 16,0 16 24,00 89 4
1724466 750516006LT 16,0 16 24,00 125 4
1724483 751516006LT 16,0 16 40,00 125 6
1724533 752516006LT 16,0 16 56,00 125 6
1860607 754520007LT 20,0 20 30,00 104 4
1724467 750520007LT 20,0 20 30,00 150 4
1724484 751520007LT 20,0 20 50,00 150 6
1724536 752520007LT 20,0 20 70,00 150 6
1860608 754525008LT 25,0 25 38,00 121 5
1731683 750525008LT 25,0 25 38,00 150 5
1747878 751525008LT 25,0 25 63,00 150 6
1747931 752525008LT 25,0 25 88,00 150 6
L
D1 D
rst choice
alternate choice
High-Performance Solid Carbide End Mills
(Series 7505 7515 7525 7545 • Vision Plus — continued)
WID_Master16_SolidEndMilling_HighPerformance_O180_O181_Metric_REBRAND.indd 181 10/30/15 2:26 PM
O182
LViWID M 16 S lidE dMilli Hi hP f O182 O183 M i REBRANDO b 20 20154 09PM
widia.com
TiAlN - LT1
High-Performance Solid Carbide End Mills • Hard Materials
Series 7585 7595 • Vision Plus™
Series 7585 7595 • Vision Plus
grade TiAlN-LT1
TiAlN
order # catalogue # D1 D
length of cut
Ap1 max
length
LR¡ZU
2540317 759503002LT 3,0 6 4,50 50 0,25 4
2540318 759503012LT 3,0 6 4,50 50 0,50 4
2540319 759504002LT 4,0 6 6,00 50 0,25 4
2540320 759504012LT 4,0 6 6,00 50 0,50 4
2540321 759505002LT 5,0 6 7,50 50 0,25 4
2540322 759505012LT 5,0 6 7,50 50 0,50 4
1862105 759506002LT 6,0 6 9,00 50 0,25 4
1862106 759506012LT 6,0 6 9,00 50 0,50 4
2541273 759506022LT 6,0 6 9,00 50 0,75 4
2541274 759506032LT 6,0 6 9,00 50 1,00 4
1860609 758506002LT 6,0 6 9,00 76 0,25 4
1860610 758506012LT 6,0 6 9,00 76 0,50 4
1862107 759508003LT 8,0 8 12,00 63 0,50 4
2541275 759508023LT 8,0 8 12,00 63 0,75 4
1862108 759508013LT 8,0 8 12,00 63 1,00 4
2541276 759508033LT 8,0 8 12,00 63 1,50 4
1860611 758508003LT 8,0 8 12,00 100 0,50 4
1860612 758508013LT 8,0 8 12,00 100 1,00 4
1862109 759510004LT 10,0 10 15,00 76 0,50 4
1862110 759510014LT 10,0 10 15,00 76 1,00 4
• Centre cutting.
• Standard items listed. Additional styles
and coatings made-to-order.
rst choice
alternate choice
End Mill Tolerances
D1 tolerance e8 D
tolerance h6
+ / -
) 3 -0,014/-0,028 ) 3 0/0,006
> 3–6 -0,020/-0,038 > 3–6 0/0,008
> 6–10 -0,025/-0,047 > 6–10 0/0,009
> 10–18 -0,032/-0,059 > 10–18 0/0,011
> 18–30 -0,040/-0,073 > 18–30 0/0,013
High-Performance Solid Carbide End Mills
(continued)
WID_Master16_SolidEndMilling_HighPerformance_O182_O183_Metric_REBRAND.indd 182 10/30/15 2:26 PM
O183
LViWID M 16 S lidE dMilli Hi hP f O182 O183 M i REBRANDO b 2020154 09PM
widia.com
TiAlN - LT1
High-Performance Solid Carbide End Mills • Hard Materials
Series 7585 7595 • Vision Plus™
grade TiAlN-LT1
TiAlN
order # catalogue # D1 D
length of cut
Ap1 max
length
LR¡ZU
2541277 759510024LT 10,0 10 15,00 76 1,50 4
2541278 759510034LT 10,0 10 15,00 76 2,00 4
1860623 758510004LT 10,0 10 15,00 100 0,50 4
1860624 758510014LT 10,0 10 15,00 100 1,00 4
1862111 759512005LT 12,0 12 18,00 76 0,50 4
2541279 759512025LT 12,0 12 18,00 76 1,00 4
1862112 759512015LT 12,0 12 18,00 76 1,50 4
2541280 759512035LT 12,0 12 18,00 76 2,00 4
1860625 758512005LT 12,0 12 18,00 125 0,50 4
1860626 758512015LT 12,0 12 18,00 125 1,50 4
1862113 759516006LT 16,0 16 24,00 89 0,50 4
1862114 759516016LT 16,0 16 24,00 89 1,50 4
2541282 759516036LT 16,0 16 24,00 89 2,00 4
1860627 758516006LT 16,0 16 24,00 125 0,50 4
1860628 758516016LT 16,0 16 24,00 125 1,50 4
1862115 759520007LT 20,0 20 30,00 104 0,50 4
2541293 759520027LT 20,0 20 30,00 104 1,00 4
1862116 759520017LT 20,0 20 30,00 104 2,00 4
1860629 758520007LT 20,0 20 30,00 150 0,50 4
1860630 758520017LT 20,0 20 30,00 150 2,00 4
1862117 759525008LT 25,0 25 38,00 121 0,50 5
1862118 759525018LT 25,0 25 38,00 121 3,00 5
1860631 758525008LT 25,0 25 38,00 150 0,50 5
1860632 758525018LT 25,0 25 38,00 150 3,00 5
rst choice
alternate choice
High-Performance Solid Carbide End Mills
(Series 7585 7595 • Vision Plus — continued)
WID_Master16_SolidEndMilling_HighPerformance_O182_O183_Metric_REBRAND.indd 183 10/30/15 2:26 PM
O184
LViWID M 16 S lidE dMilli Hi hP f O184 O185 M i REBRANDO b 20 20154 09PM
widia.com
TiAlN - LT1
High-Performance Solid Carbide End Mills • Hard Materials
Series 75N5 • Vision Plus™
Series 75N5 • Vision Plus
grade TiAlN-LT1
TiAlN
order # catalogue # D1 D D3
length of cut
Ap1 max L3
length
LR¡ZU
2544367 75N503022LT 3,0 6 2,7 4,50 9,00 57 0,25 4
2544368 75N503042LT 3,0 6 2,7 4,50 9,00 57 0,50 4
2544369 75N504022LT 4,0 6 3,7 6,00 12,00 57 0,25 4
2544370 75N504042LT 4,0 6 3,7 6,00 12,00 57 0,50 4
2544371 75N505022LT 5,0 6 4,6 7,50 15,00 76 0,25 4
2544372 75N505042LT 5,0 6 4,6 7,50 15,00 76 0,50 4
1862119 75N506002LT 6,0 6 5,4 9,00 18,00 76 — 4
2544443 75N506022LT 6,0 6 5,4 9,00 18,00 76 0,25 4
2544444 75N506042LT 6,0 6 5,4 9,00 18,00 76 0,50 4
2544445 75N506062LT 6,0 6 5,4 9,00 18,00 76 0,75 4
2544446 75N506082LT 6,0 6 5,4 9,00 18,00 76 1,00 4
1862120 75N508003LT 8,0 8 7,4 12,00 24,00 100 — 4
2544447 75N508023LT 8,0 8 7,4 12,00 24,00 100 0,50 4
2544448 75N508033LT 8,0 8 7,4 12,00 24,00 100 1,00 4
2544449 75N508043LT 8,0 8 7,4 12,00 24,00 100 1,50 4
2544450 75N508053LT 8,0 8 7,4 12,00 24,00 100 2,00 4
1862121 75N510004LT 10,0 10 9,4 15,00 30,00 100 — 4
2544452 75N510024LT 10,0 10 9,2 15,00 30,00 100 0,50 4
2544483 75N510034LT 10,0 10 9,2 15,00 30,00 100 1,00 4
2544484 75N510044LT 10,0 10 9,2 15,00 30,00 100 1,50 4
• Centre cutting.
• Standard items listed. Additional styles
and coatings made-to-order.
rst choice
alternate choice
End Mill Tolerances
D1 tolerance e8 D
tolerance h6
+ / -
) 3 -0,014/-0,028 ) 3 0/0,006
> 3–6 -0,020/-0,038 > 3–6 0/0,008
> 6–10 -0,025/-0,047 > 6–10 0/0,009
> 10–18 -0,032/-0,059 > 10–18 0/0,011
> 18–30 -0,040/-0,073 > 18–30 0/0,013
High-Performance Solid Carbide End Mills
(continued)
WID_Master16_SolidEndMilling_HighPerformance_O184_O185_Metric_REBRAND.indd 184 10/30/15 2:26 PM
O185
LViWID M 16 S lidE dMilli Hi hP f O184 O185 M i REBRANDO b 2020154 09PM
widia.com
TiAlN - LT1
High-Performance Solid Carbide End Mills • Hard Materials
Series 75N5 • Vision Plus™
grade TiAlN-LT1
TiAlN
order # catalogue # D1 D D3
length of cut
Ap1 max L3
length
LR¡ZU
2544485 75N510054LT 10,0 10 9,2 15,00 30,00 100 2,00 4
1862122 75N512005LT 12,0 12 11,4 18,00 36,00 125 — 4
2544486 75N512025LT 12,0 12 11,0 18,00 36,00 125 0,50 4
2544487 75N512035LT 12,0 12 11,0 18,00 36,00 125 1,00 4
2544488 75N512045LT 12,0 12 11,0 18,00 36,00 125 1,50 4
2544489 75N512055LT 12,0 12 11,0 18,00 36,00 125 2,00 4
1862123 75N516006LT 16,0 16 15,4 24,00 48,00 125 — 4
2544490 75N516026LT 16,0 16 15,0 24,00 48,00 125 0,50 4
2544491 75N516046LT 16,0 16 15,0 24,00 48,00 125 1,50 4
1862124 75N520007LT 20,0 20 19,4 30,00 60,00 150 — 4
2544492 75N520027LT 20,0 20 19,0 30,00 60,00 150 0,50 4
2544523 75N520047LT 20,0 20 19,0 30,00 60,00 150 2,00 4
1862125 75N525008LT 25,0 25 24,4 38,00 75,00 150 — 5
2544524 75N525028LT 25,0 25 24,0 38,00 75,00 150 0,50 5
2544525 75N525048LT 25,0 25 24,0 38,00 75,00 150 3,00 5
rst choice
alternate choice
High-Performance Solid Carbide End Mills
(Series 75N5 • Vision Plus — continued)
WID_Master16_SolidEndMilling_HighPerformance_O184_O185_Metric_REBRAND.indd 185 10/30/15 2:26 PM
O186
LViWID M 16 S lidE dMilli Hi hP f O186 O187 M i REBRANDN b 12 20159 24AM
widia.com
TiAlN - RT1
High Performance Solid Carbide End Mills • Hard Materials
Series 75N8 • Vision Plus™
End Mill Tolerances
D1 tolerance e8 D
tolerance h6
+ / -
) 3 -0,014/-0,028 ) 3 0/0,006
> 3–6 -0,020/-0,038 > 3–6 0/0,008
> 6–10 -0,025/-0,047 > 6–10 0/0,009
> 10–18 -0,032/-0,059 > 10–18 0/0,011
> 18–30 -0,040/-0,073 > 18–30 0/0,013
Series 75N8 • Vision Plus
grade TiAlN-RT1
TiAlN
order # catalogue # D1 D D3
length of cut
Ap1 max L3
length
LR¡
2544526 75N806002RT 6,0 6 5,50 6,00 18,00 76 0,50
2544527 75N808003RT 8,0 8 7,40 8,00 24,00 100 0,50
2544528 75N810004RT 10,0 10 9,20 10,00 30,00 100 1,00
2544529 75N812005RT 12,0 12 11,00 12,00 36,00 125 1,00
High-Performance Solid Carbide End Mills
• Centre cutting.
• Standard items listed. Additional styles
and coatings made-to-order.
rst choice
alternate choice
WID_Master16_SolidEndMilling_HighPerformance_O186_O187_Metric_REBRAND.indd 186 11/12/15 9:56 AM
O187
LViWID M 16 S lidE dMilli Hi hP f O186 O187 M i REBRANDN b 122015924AM
widia.com
K10UF-DCHP
High-Performance Solid Carbide End Mills • Hard Materials
Series 422876 422878 • Vision Plus™
Series 422876 422878 • Vision Plus
grade K10UF-DCHP
AlTiN
order # catalogue # D1 D D3
length of cut
Ap1 max L3
length
LR¡
2628898 422876-004005 4,0 6 3,80 4,00 10,00 45 0,50
2629013 422876-004010 4,0 6 3,80 4,00 10,00 45 1,00
2629015 422876-005005 5,0 6 4,80 5,00 12,00 50 0,50
2629016 422876-005010 5,0 6 4,80 5,00 12,00 50 1,00
2629018 422876-006005 6,0 6 5,80 6,00 12,00 50 0,50
2629021 422876-006010 6,0 6 5,80 6,00 12,00 50 1,00
2630276 422878-006005 6,0 6 5,80 6,00 42,00 80 0,50
2629056 422876-008005 8,0 8 7,80 8,00 20,00 60 0,50
2629060 422876-008010 8,0 8 7,80 8,00 20,00 60 1,00
2629061 422876-008020 8,0 8 7,80 8,00 20,00 60 2,00
2630285 422878-008010 8,0 8 7,80 8,00 51,00 90 1,00
2630288 422878-008015 8,0 8 7,80 8,00 51,00 90 1,50
2630290 422878-008020 8,0 8 7,80 8,00 51,00 90 2,00
2629062 422876-010005 10,0 10 9,80 10,00 26,00 70 0,50
2629077 422876-010010 10,0 10 9,80 10,00 26,00 70 1,00
2629086 422876-010020 10,0 10 9,80 10,00 26,00 70 2,00
2630291 422878-010005 10,0 10 9,70 10,00 57,00 100 0,50
2630292 422878-010010 10,0 10 9,70 10,00 57,00 100 1,00
2630345 422878-010020 10,0 10 9,70 10,00 57,00 100 2,00
2629089 422876-012005 12,0 12 11,80 12,00 26,00 75 0,50
2629094 422876-012010 12,0 12 11,80 12,00 26,00 75 1,00
2629095 422876-012020 12,0 12 11,80 12,00 26,00 75 2,00
2629097 422876-012030 12,0 12 11,80 12,00 26,00 75 3,00
2630347 422878-012010 12,0 12 11,70 12,00 62,00 110 1,00
2630386 422878-012030 12,0 12 11,70 12,00 62,00 110 3,00
• Centre cutting.
• Standard items listed. Additional styles
and coatings made-to-order.
rst choice
alternate choice
High-Performance Solid Carbide End Mills
End Mill Tolerances
D1
tolerance h8
+ / - D
tolerance h6
+ / -
) 3 0/0,014 ) 3 0/0,006
> 3–6 0/0,018 > 3–6 0/0,008
> 6–10 0/0,022 > 6–10 0/0,009
> 10–18 0/0,027 > 10–18 0/0,011
> 18–30 0/0,033 > 18–30 0/0,013
WID_Master16_SolidEndMilling_HighPerformance_O186_O187_Metric_REBRAND.indd 187 11/12/15 9:56 AM
O188
LViWID M 16 S lidE dMilli Hi hP f O188 O189 M i REBRANDO b 20 20154 09PM
widia.com
TiAlN-RT
High-Performance Solid Carbide End Mills • Hard Materials
Series 7150 • Vision Plus™
End Mill Tolerances
D1 tolerance e8 D
tolerance h6
+ / -
) 3 -0,014/-0,028 ) 3 0/0,006
> 3–6 -0,020/-0,038 > 3–6 0/0,008
> 6–10 -0,025/-0,047 > 6–10 0/0,009
> 10–18 -0,032/-0,059 > 10–18 0/0,011
> 18–30 -0,040/-0,073 > 18–30 0/0,013
Series 7150 • Vision Plus
grade TiAlN-RT1
TiAlN
order # catalogue # D1 D
length of cut
Ap1 max
length
L
1859880 715002000RT 2,0 3 2,00 38
1859881 715002500RT 2,5 3 3,00 38
1859882 715003000RT 3,0 3 3,00 38
1859904 715004001RT 4,0 4 4,00 50
1859906 715005001RT 5,0 5 5,00 50
1859907 715006002RT 6,0 6 6,00 50
1859908 715008003RT 8,0 8 8,00 63
1859909 715010004RT 10,0 10 10,00 76
1859910 715012005RT 12,0 12 12,00 76
1859911 715016006RT 16,0 16 16,00 89
1859912 715020007RT 20,0 20 20,00 104
High-Performance Solid Carbide End Mills
• Centre cutting.
• Standard items listed. Additional styles
and coatings made-to-order.
rst choice
alternate choice
WID_Master16_SolidEndMilling_HighPerformance_O188_O189_Metric_REBRAND.indd 188 10/30/15 2:26 PM
O189
LViWID M 16 S lidE dMilli Hi hP f O188 O189 M i REBRANDO b 2020154 09PM
widia.com
TiAlN - RT1
High-Performance Solid Carbide End Mills • Hard Materials
Series 7050 7060 • Vision Plus™
Series 7050 7060 • Vision Plus
grade TiAlN-RT1
TiAlN
order # catalogue # D1 D D3
length of cut
Ap1 max L3
length
L BETA
1724321 705002001RT 2,0 4 — 2,00 2,00 63 2.5
2495913 706002001RT 2,0 4 — 2,00 2,00 63 3.5
1724322 705002501RT 2,5 4 — 2,50 2,50 63 2.5
2495914 706002501RT 2,5 4 — 2,50 2,50 63 3.0
1724323 705003002RT 3,0 6 — 3,00 3,00 75 2.5
2495915 706003002RT 3,0 6 — 3,00 3,00 75 1.5
1724324 705004002RT 4,0 6 — 4,00 4,00 75 2.5
2495916 706004002RT 4,0 6 — 4,00 4,00 75 1.5
1724325 705005002RT 5,0 6 — 5,00 5,00 75 2.5
2495917 706005002RT 5,0 6 — 5,00 5,00 75 1.5
1724326 705006004RT 6,0 10 — 6,00 6,00 100 2.5
2495918 706006004RT 6,0 10 — 6,00 6,00 100 1.5
1724327 705008004RT 8,0 10 — 8,00 8,00 100 2.5
2495919 706008004RT 8,0 10 — 8,00 8,00 100 1.5
1724328 705010005RT 10,0 12 — 10,00 10,00 125 2.5
2495920 706010005RT 10,0 12 — 10,00 10,00 125 1.5
1724329 705012006RT 12,0 16 — 12,00 12,00 125 2.5
2495921 706012006RT 12,0 16 — 12,00 12,00 125 1.5
1724330 705016006RT 16,0 16 15,00 16,00 48,00 125 —
1724361 705020007RT 20,0 20 19,00 20,00 60,00 150 —
• Centre cutting.
• Standard items listed. Additional styles
and coatings made-to-order.
rst choice
alternate choice
End Mill Tolerances
D1 tolerance e8 D
tolerance h6
+ / -
) 3 -0,014/-0,028 ) 3 0/0,006
> 3–6 -0,020/-0,038 > 3–6 0/0,008
> 6–10 -0,025/-0,047 > 6–10 0/0,009
> 10–18 -0,032/-0,059 > 10–18 0/0,011
> 18–30 -0,040/-0,073 > 18–30 0/0,013
High-Performance Solid Carbide End Mills
WID_Master16_SolidEndMilling_HighPerformance_O188_O189_Metric_REBRAND.indd 189 10/30/15 2:26 PM
O190
LViWID M 16 S lidE dMilli Hi hP f O190 O191 M i REBRANDO b 20 20154 08PM
widia.com
K10UF-DCHP
High-Performance Solid Carbide End Mills • Hard Materials
Series 422871 • Vision Plus™
End Mill Tolerances
D1
tolerance h8
+ / - D
tolerance h6
+ / -
) 3 0/0,014 ) 3 0/0,006
> 3–6 0/0,018 > 3–6 0/0,008
> 6–10 0/0,022 > 6–10 0/0,009
> 10–18 0/0,027 > 10–18 0/0,011
> 18–30 0/0,033 > 18–30 0/0,013
Series 422871 • Vision Plus
grade K10UF-DCHP
AlTiN
order # catalogue # D1 D
length of cut
Ap1 max
length
L BETA
2343218 422871-030075 3,0 6 4,00 75 2.85
2343220 422871-030100 3,0 6 4,00 100 1.65
2343222 422871-040075 4,0 6 5,00 75 2.67
2343224 422871-040100 4,0 6 5,00 100 1.18
2343227 422871-050075 5,0 6 6,00 75 1.33
2343229 422871-050100 5,0 8 6,00 100 1.75
2343230 422871-060075 6,0 8 8,00 75 2.38
2343233 422871-060100 6,0 10 8,00 100 2.52
2343235 422871-080100 8,0 10 12,00 100 1.52
2343237 422871-080150 8,0 12 12,00 150 1.40
2343239 422871-100100 10,0 12 15,00 100 1.83
2343241 422871-100150 10,0 12 15,00 150 0.80
High-Performance Solid Carbide End Mills
• Centre cutting.
• Standard items listed. Additional styles
and coatings made-to-order.
rst choice
alternate choice
WID_Master16_SolidEndMilling_HighPerformance_O190_O191_Metric_REBRAND.indd 190 10/30/15 2:26 PM
O191
LViWID M 16 S lidE dMilli Hi hP f O190 O191 M i REBRANDO b 2020154 08PM
widia.com
TiAlN-RJ
High-Performance Solid Carbide End Mills • Hard Materials
Series D618 • Vision Plus™
Series D618 • Vision Plus
grade TiAlN-RJ
TiAlN
order # catalogue # D1 D
length of cut
Ap1 max
length
LZU
2256338 D61803002RJ 3,0 4 8,00 50 4
2257304 D61804002RJ 4,0 6 12,00 57 4
2256340 D61805002RJ 5,0 6 13,00 57 4
2256341 D61806002RJ 6,0 6 15,00 60 6
2256342 D61807003RJ 7,0 8 20,00 75 6
2256353 D61808003RJ 8,0 8 20,00 75 6
2256354 D61810004RJ 10,0 10 25,00 80 6
2256355 D61812005RJ 12,0 12 30,00 100 6
2256356 D61816006RJ 16,0 16 40,00 110 6
2256357 D61820007RJ 20,0 20 45,00 120 6
• Centre cutting.
• Standard items listed. Additional styles
and coatings made-to-order.
rst choice
alternate choice
End Mill Tolerances
D1 tolerance e8 D
tolerance h6
+ / -
) 3 -0,014/-0,028 ) 3 0/0,006
> 3–6 -0,020/-0,038 > 3–6 0/0,008
> 6–10 -0,025/-0,047 > 6–10 0/0,009
> 10–18 -0,032/-0,059 > 10–18 0/0,011
> 18–30 -0,040/-0,073 > 18–30 0/0,013
High-Performance Solid Carbide End Mills
WID_Master16_SolidEndMilling_HighPerformance_O190_O191_Metric_REBRAND.indd 191 10/30/15 2:26 PM
O192
LViWID M 16 S lidE dMilli Hi hP f O192 O193 M i REBRANDO b 20 20154 08PM
widia.com
K10UF-DCHP
High-Performance Solid Carbide End Mills • Hard Materials
Series 422837 422831 • Vision Plus™
End Mill Tolerances
D1
tolerance h10
+ / - D
tolerance h6
+ / -
) 3 0/0,040 ) 3 0/0,006
> 3–6 0/0,048 > 3–6 0/0,008
> 6–10 0/0,058 > 6–10 0/0,009
> 10–18 0/0,070 > 10–18 0/0,011
> 18–30 0/0,084 > 18–30 0/0,013
Series 422837 422831 • Vision Plus
grade K10UF-DCHP
AlTiN
order # catalogue # D1 D
length of cut
Ap1 max
length
LR¡ZU
2342495 422837-006005 6,0 6 13,00 57 0,50 6
2342388 422831-006005 6,0 6 18,00 62 0,50 6
2342497 422837-008005 8,0 8 19,00 63 0,50 6
2342390 422831-008005 8,0 8 24,00 68 0,50 6
2342499 422837-010005 10,0 10 22,00 72 0,50 6
2342392 422831-010005 10,0 10 30,00 80 0,50 6
2656458 422837-012005 12,0 12 26,00 83 0,50 6
2342501 422837-012010 12,0 12 26,00 83 1,00 6
2657057 422831-012005 12,0 12 36,00 93 0,50 6
2342394 422831-012010 12,0 12 36,00 93 1,00 6
2656459 422837-016005 16,0 16 32,00 92 0,50 6
2342502 422837-016010 16,0 16 32,00 92 1,00 6
2342396 422831-016010 16,0 16 48,00 108 1,00 6
2657058 422831-016005 16,0 16 48,00 108 0,50 6
2656460 422837-020005 20,0 20 38,00 104 0,50 8
2342505 422837-020010 20,0 20 38,00 104 1,00 8
2342398 422831-020010 20,0 20 60,00 126 1,00 8
2656461 422837-025005 25,0 25 45,00 121 0,50 8
2342400 422831-025015 25,0 25 75,00 150 1,50 8
High-Performance Solid Carbide End Mills
• Non-centre cutting.
• Standard items listed. Additional styles and
coatings made-to-order.
rst choice
alternate choice
WID_Master16_SolidEndMilling_HighPerformance_O192_O193_Metric_REBRAND.indd 192 10/30/15 2:26 PM
O193
LViWID M 16 S lidE dMilli Hi hP f O192 O193 M i REBRANDO b 2020154 08PM
widia.com
TiAlN - LT1
High-Performance Solid Carbide End Mills • Hard Materials
Series 7670 • Vision Plus™
Series 7670 • Vision Plus
grade TiAlN-LT1
TiAlN
order # catalogue # D1 D D3
length of cut
Ap1 max L3
length
LR¡ZU BETA
1724582 767004002LT 4,0 6 — 4,00 4,00 75 0,75 3 2.5
1724556 767005002LT 5,0 6 — 5,00 5,00 75 0,75 3 2.5
1724558 767006004LT 6,0 10 — 6,00 6,00 100 0,75 4 2.5
1724559 767008004LT 8,0 10 — 8,00 8,00 100 0,75 4 2.5
1724560 767010005LT 10,0 12 — 10,00 10,00 125 0,75 4 2.5
1724590 767012006LT 12,0 16 — 12,00 12,00 125 1,00 4 2.5
1724621 767016006LT 16,0 16 15,00 16,00 48,00 125 1,00 6 —
1724622 767020007LT 20,0 20 19,00 20,00 60,00 150 1,25 6 —
1806404 767025008LT 25,0 25 24,00 25,00 75,00 150 1,25 6 —
• Centre cutting.
• Standard items listed. Additional styles and
coatings made-to-order.
rst choice
alternate choice
End Mill Tolerances
D1 tolerance d11 D
tolerance h6
+ / -
) 3 -0,020/-0,080 ) 3 0/0,006
> 3–6 -0,030/-0,105 > 3–6 0/0,008
> 6–10 -0,040/-0,130 > 6–10 0/0,009
> 10–18 -0,050/-0,160 > 10–18 0/0,011
> 18–30 -0,065/-0,195 > 18–30 0/0,013
High-Performance Solid Carbide End Mills
WID_Master16_SolidEndMilling_HighPerformance_O192_O193_Metric_REBRAND.indd 193 10/30/15 2:26 PM
O194
LViWID M 16 S lidE dMilli Hi hP f O194 O195 M i REBRANDN b 3 201510 46AM
widia.com
High-Performance Solid Carbide End Mills • Hard Materials
Application Data • Series 75N2 • Vision Plus™
High-Performance Solid Carbide End Mills
Series 75N2 • Vision Plus
Material
Group
Side Milling (A)
and Slotting (B) TiAlN Recommended feed per tooth (fz = mm/th) for side milling (A).
For slotting (B), reduce fz by 20%.
AB
Cutting Speed — vc
m/min D1 — Diameter
ap ae ap min max mm 3,0 4,0 5,0 6,0 8,0 10,0 12,0
P3
0,75 x D 0,1 x D 0,4 x D 160 – 180 fz 0,017 0,023 0,030 0,036 0,050 0,061 0,070
4
0,75 x D 0,1 x D 0,4 x D 140 – 160 fz 0,016 0,021 0,027 0,033 0,045 0,054 0,062
H
1
0,75 x D 0,1 x D 0,4 x D 120 – 140 fz 0,016 0,021 0,027 0,033 0,045 0,054 0,062
2
0,75 x D 0,05 x D 0,3 x D 100 – 130 fz 0,016 0,020 0,025 0,029 0,034 0,037 0,040
3
0,75 x D 0,03 x D 0,2 x D 70 – 100 fz 0,013 0,016 0,019 0,023 0,026 0,029 0,032
4
0,75 x D 0,01 x D 0,1 x D 50 – 70 fz 0,008 0,011 0,013 0,015 0,018 0,019 0,021
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for fi nishing applications or for lower hardness (machinability) within group.
Application Data • Series 422875 • Vision Plus™
Series 422875 • Vision Plus
Material
Group
Side Milling (A)
and Slotting (B)
K10UF-DCHP Recommended feed per tooth (fz = mm/th) for side milling (A).
For slotting (B), reduce fz by 20%.
AlTiN
AB
Cutting Speed — vc
m/min D1 — Diameter
ap ae ap min max mm 3,0 4,0 5,0 6,0 8,0 10,0 12,0
P3
0,5 x D 0,4 x D 0,3 x D 108 – 144 fz 0,017 0,023 0,030 0,036 0,050 0,061 0,070
4
0,5 x D 0,4 x D 0,3 x D 81 – 135 fz 0,016 0,021 0,027 0,033 0,045 0,054 0,062
H
1
0,5 x D 0,4 x D 0,3 x D 72 – 126 fz 0,016 0,021 0,027 0,033 0,045 0,054 0,062
2
0,5 x D 0,3 x D 0,2 x D 63 – 108 fz 0,012 0,016 0,020 0,025 0,034 0,040 0,047
3
0,5 x D 0,15 x D 0,15 x D 54 – 81 fz 0,009 0,013 0,016 0,019 0,026 0,032 0,037
4
0,5 x D 0,1 x D 0,1 x D 45 – 63 fz 0,006 0,008 0,011 0,013 0,018 0,021 0,025
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for fi nishing applications or for lower hardness (machinability) within group.
For ap/ae 0.05 x D, increase fz by 40%.
For better surface fi nish, reduce feed per tooth.
WID_Master16_SolidEndMilling_HighPerformance_O194_O195_Metric_REBRAND.indd 194 11/3/15 10:47 AM
O195
LViWID M 16 S lidE dMilli Hi hP f O194 O195 M i REBRANDN b 320151046AM
widia.com
High-Performance Solid Carbide End Mills • Hard Materials
Application Data • Series 7151 • Vision Plus™
High-Performance Solid Carbide End Mills
Series 7151 • Vision Plus
Material
Group
Profi le Milling TiAlN Recommended feed per tooth (fz = mm/th) for 3D milling/profi ling (A) — Semi-Finishing
ACutting Speed — vc
m/min D1 — Diameter
ap ae min max mm 1,0 2,0 2,5 3,0 4,0 5,0 6,0 8,0 10,0 12,0
P3
0,1 x D 0,05 x D 240 – 320 fz 0,017 0,034 0,043 0,052 0,070 0,089 0,109 0,150 0,182 0,211
4
0,1 x D 0,1 x D 180 – 300 fz 0,016 0,031 0,040 0,048 0,064 0,081 0,099 0,134 0,162 0,187
H
1
0,1 x D 0,1 x D 160 – 280 fz 0,016 0,031 0,040 0,048 0,064 0,081 0,099 0,134 0,162 0,187
2
0,1 x D 0,1 x D 140 – 240 fz 0,012 0,024 0,030 0,036 0,048 0,061 0,074 0,101 0,121 0,140
3
0,1 x D 0,1 x D 120 – 180 fz 0,009 0,019 0,024 0,028 0,038 0,048 0,058 0,079 0,096 0,112
4
0,1 x D 0,1 x D 100 – 140 fz 0,006 0,012 0,016 0,019 0,025 0,032 0,039 0,053 0,064 0,074
NOTE: Please use the reference table to optimise your cutting speed based on the average cutting angle of the application. See page O205.
Application Data • Series 7061 • Vision Plus™
Series 7061 • Vision Plus
Material
Group
Profi le Milling TiAlN Recommended feed per tooth (fz = mm/th) for 3D milling/profi ling (A) — Semi-Finishing
ACutting Speed — vc
m/min D1 — Diameter
ap ae min max mm 1,0 2,0 2,5 3,0 4,0 5,0 6,0 8,0 10,0 12,0
P3
0,1 x D 0,05 x D 240 – 320 fz 0,017 0,034 0,043 0,052 0,070 0,089 0,109 0,150 0,182 0,211
4
0,1 x D 0,1 x D 180 – 300 fz 0,016 0,031 0,040 0,048 0,064 0,081 0,099 0,134 0,162 0,187
H
1
0,1 x D 0,1 x D 160 – 280 fz 0,016 0,031 0,040 0,048 0,064 0,081 0,099 0,134 0,162 0,187
2
0,1 x D 0,1 x D 140 – 240 fz 0,012 0,024 0,030 0,036 0,048 0,061 0,074 0,101 0,121 0,140
3
0,1 x D 0,1 x D 120 – 180 fz 0,009 0,019 0,024 0,028 0,038 0,048 0,058 0,079 0,096 0,112
4
0,1 x D 0,1 x D 100 – 140 fz 0,006 0,012 0,016 0,019 0,025 0,032 0,039 0,053 0,064 0,074
NOTE: Please use the reference table to optimise your cutting speed based on the average cutting angle of the application. See page O205.
WID_Master16_SolidEndMilling_HighPerformance_O194_O195_Metric_REBRAND.indd 195 11/3/15 10:47 AM
O196
LViWID M 16 S lidE dMilli Hi hP f O196 O197 M i REBRANDO b 20 20154 12PM
widia.com
High-Performance Solid Carbide End Mills • Hard Materials
Application Data • Series 70N1 • Vision Plus™
High-Performance Solid Carbide End Mills
Series 70N1 • Vision Plus
Material
Group
Profi le Milling TiAlN Recommended feed per tooth (fz = mm/th) for 3D milling/profi ling (A) — Semi-Finishing
ACutting Speed — vc
m/min D1 — Diameter
ap ae min max mm 1,0 2,0 2,5 3,0 4,0 5,0 6,0 8,0 10,0 12,0
P3
0,1 x D 0,1 x D 240 – 320 fz 0,017 0,034 0,043 0,052 0,070 0,089 0,109 0,150 0,182 0,211
4
0,1 x D 0,1 x D 180 – 300 fz 0,016 0,031 0,040 0,048 0,064 0,081 0,099 0,134 0,162 0,187
H
1
0,1 x D 0,1 x D 160 – 280 fz 0,016 0,031 0,040 0,048 0,064 0,081 0,099 0,134 0,162 0,187
2
0,1 x D 0,1 x D 140 – 240 fz 0,012 0,024 0,030 0,036 0,048 0,061 0,074 0,101 0,121 0,140
3
0,1 x D 0,1 x D 120 – 180 fz 0,009 0,019 0,024 0,028 0,038 0,048 0,058 0,079 0,096 0,112
4
0,1 x D 0,1 x D 100 – 140 fz 0,006 0,012 0,016 0,019 0,025 0,032 0,039 0,053 0,064 0,074
NOTE: Please use the reference table to optimise your cutting speed based on the average cutting angle of the application. See page O205.
Application Data • Series 422869 422868 • Vision Plus™
Series 422869 422868 • Vision Plus
Material
Group
Profi le Milling AlTiN Recommended feed per tooth (fz = mm/th) for 3D milling/profi ling (A) — Semi-Finishing
ACutting Speed — vc
m/min D1 — Diameter
ap ae min max mm 1,0 2,0 2,5 3,0 4,0 5,0 6,0 8,0 10,0 12,0
P3
0,1 x D 0,1 x D 240 – 320 fz 0,017 0,034 0,043 0,052 0,070 0,089 0,109 0,150 0,182 0,211
4
0,1 x D 0,1 x D 180 – 300 fz 0,016 0,031 0,040 0,048 0,064 0,081 0,099 0,134 0,162 0,187
H
1
0,1 x D 0,1 x D 160 – 280 fz 0,016 0,031 0,040 0,048 0,064 0,081 0,099 0,134 0,162 0,187
2
0,1 x D 0,1 x D 140 – 240 fz 0,012 0,024 0,030 0,036 0,048 0,061 0,074 0,101 0,121 0,140
3
0,1 x D 0,1 x D 120 – 180 fz 0,009 0,019 0,024 0,028 0,038 0,048 0,058 0,079 0,096 0,112
4
0,1 x D 0,1 x D 100 – 140 fz 0,006 0,012 0,016 0,019 0,025 0,032 0,039 0,053 0,064 0,074
NOTE: Please use the reference table to optimise your cutting speed based on the average cutting angle of the application. See page O205.
WID_Master16_SolidEndMilling_HighPerformance_O196_O197_Metric_REBRAND.indd 196 10/30/15 2:26 PM
O197
LViWID M 16 S lidE dMilli Hi hP f O196 O197 M i REBRANDO b 2020154 12PM
widia.com
High-Performance Solid Carbide End Mills • Hard Materials
Application Data • Series 422870 • Vision Plus™
High-Performance Solid Carbide End Mills
Series 422870 • Vision Plus
Material
Group
Profi le Milling AlTiN Recommended feed per tooth (fz = mm/th) for 3D milling/profi ling (A) — Semi-Finishing
ACutting Speed — vc
m/min D1 — Diameter
ap ae min max mm 1,0 2,0 2,5 3,0 4,0 5,0 6,0 8,0 10,0 12,0
P3
0,1 x D 0,1 x D 240 – 320 fz 0,017 0,034 0,043 0,052 0,070 0,089 0,109 0,150 0,182 0,211
4
0,1 x D 0,1 x D 180 – 300 fz 0,016 0,031 0,040 0,048 0,064 0,081 0,099 0,134 0,162 0,187
H
1
0,1 x D 0,1 x D 160 – 280 fz 0,016 0,031 0,040 0,048 0,064 0,081 0,099 0,134 0,162 0,187
2
0,1 x D 0,1 x D 140 – 240 fz 0,012 0,024 0,030 0,036 0,048 0,061 0,074 0,101 0,121 0,140
3
0,1 x D 0,1 x D 120 – 180 fz 0,009 0,019 0,024 0,028 0,038 0,048 0,058 0,079 0,096 0,112
4
0,1 x D 0,1 x D 100 – 140 fz 0,006 0,012 0,016 0,019 0,025 0,032 0,039 0,053 0,064 0,074
NOTE: Please use the reference table to optimise your cutting speed based on the average cutting angle of the application. See page O205.
Series 422873 • Vision Plus
Material
Group
Profi le Milling AlTiN Recommended feed per tooth (fz = mm/th) for 3D milling/profi ling (A) — Semi-Finishing
ACutting Speed — vc
m/min D1 — Diameter
ap ae min max mm 1,0 2,0 2,5 3,0 4,0 5,0 6,0 8,0 10,0 12,0
P3
0,1 x D 0,1 x D 240 – 320 fz 0,017 0,034 0,043 0,052 0,070 0,089 0,109 0,150 0,182 0,211
4
0,1 x D 0,1 x D 180 – 300 fz 0,016 0,031 0,040 0,048 0,064 0,081 0,099 0,134 0,162 0,187
H
1
0,1 x D 0,1 x D 160 – 280 fz 0,016 0,031 0,040 0,048 0,064 0,081 0,099 0,134 0,162 0,187
2
0,1 x D 0,1 x D 140 – 240 fz 0,012 0,024 0,030 0,036 0,048 0,061 0,074 0,101 0,121 0,140
3
0,1 x D 0,1 x D 120 – 180 fz 0,009 0,019 0,024 0,028 0,038 0,048 0,058 0,079 0,096 0,112
4
0,1 x D 0,1 x D 100 – 140 fz 0,006 0,012 0,016 0,019 0,025 0,032 0,039 0,053 0,064 0,074
NOTE: Please use the reference table to optimise your cutting speed based on the average cutting angle of the application. See page O205.
Application Data • Series 422873 • Vision Plus™
WID_Master16_SolidEndMilling_HighPerformance_O196_O197_Metric_REBRAND.indd 197 10/30/15 2:26 PM
O198
LViWID M 16 S lidE dMilli Hi hP f O198 O199 M i REBRANDO b 20 20154 12PM
widia.com
High-Performance Solid Carbide End Mills • Hard Materials
Application Data • Series 7505 7545 7515 7525 • Vision Plus™
High-Performance Solid Carbide End Mills
Series 7505 7545 7515 7525 • Vision Plus
Material
Group
Side Milling (A)
and Slotting (B) TiAlN Recommended feed per tooth (fz = mm/th) for side milling (A).
For slotting (B), reduce fz by 20%.
AB
Cutting Speed
— vc
m/min
D1 — Diameter
ap ae ap min max mm 4,0 5,0 6,0 8,0 10,0 12,0 14,0 16,0 18,0 20,0 25,0
P3
1 x D 0,4 x D 1 x D 120 – 160 fz 0,026 0,033 0,040 0,055 0,067 0,077 0,087 0,096 0,104 0,111 0,125
4
1 x D 0,4 x D 0,75 x D 90 – 150 fz 0,024 0,030 0,036 0,049 0,059 0,069 0,077 0,084 0,091 0,097 0,107
H
1
1 x D 0,4 x D 0,75 x D 80 – 140 fz 0,024 0,030 0,036 0,049 0,059 0,069 0,077 0,084 0,091 0,097 0,107
2
1 x D 0,3 x D 0,5 x D 70 – 120 fz 0,018 0,022 0,027 0,037 0,044 0,051 0,057 0,063 0,067 0,071 0,078
3
1 x D 0,15 x D 0,3 x D 60 – 90 fz 0,014 0,018 0,021 0,029 0,035 0,041 0,046 0,051 0,055 0,059 0,067
4
1 x D 0,1 x D 0,15 x D 50 – 70 fz 0,009 0,012 0,014 0,019 0,023 0,027 0,031 0,034 0,037 0,039 0,044
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for fi nishing applications or for lower hardness (machinability) within group.
For better surface fi nish, reduce feed per tooth.
Application Data • Series 7515 • Vision Plus™
Series 7515 • Vision Plus
Material
Group
Side Milling (A)
and Slotting (B) TiAlN Recommended feed per tooth (fz = mm/th) for side milling (A).
For slotting (B), reduce fz by 20%.
AB
Cutting Speed
— vc
m/min
D1 — Diameter
ap ae ap min max mm 3,0 4,0 5,0 6,0 8,0 10,0 12,0 16,0 20,0 25,0
P3
2 x D 0,3 x D 0,75 x D 160 – 180 fz 0,019 0,026 0,033 0,040 0,055 0,067 0,077 0,096 0,111 0,125
4
2 x D 0,25 x D 0,5 x D 140 – 160 fz 0,017 0,024 0,030 0,036 0,049 0,059 0,069 0,084 0,097 0,107
H
1
2 x D 0,25 x D 0,5 x D 120 – 140 fz 0,017 0,024 0,030 0,036 0,049 0,059 0,069 0,084 0,097 0,107
2
2 x D 0,2 x D 0,4 x D 80 – 130 fz 0,013 0,018 0,022 0,027 0,037 0,044 0,051 0,063 0,071 0,078
3
2 x D 0,1 x D 0,2 x D 70 – 100 fz 0,010 0,014 0,018 0,021 0,029 0,035 0,041 0,051 0,059 0,067
4
2 x D 0,05 x D 0,05 x D 50 – 70 fz 0,007 0,009 0,012 0,014 0,019 0,023 0,027 0,034 0,039 0,044
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for fi nishing applications or for lower hardness (machinability) within group.
For better surface fi nish, reduce feed per tooth.
WID_Master16_SolidEndMilling_HighPerformance_O198_O199_Metric_REBRAND.indd 198 10/30/15 2:26 PM
O199
LViWID M 16 S lidE dMilli Hi hP f O198 O199 M i REBRANDO b 2020154 12PM
widia.com
High-Performance Solid Carbide End Mills • Hard Materials
Application Data • Series 7525 • Vision Plus™
High-Performance Solid Carbide End Mills
Series 7525 • Vision Plus
Material
Group
Side Milling (A)
and Slotting (B) TiAlN Recommended feed per tooth (fz = mm/th) for side milling (A).
For slotting (B), reduce fz by 20%.
AB
Cutting Speed
— vc
m/min
D1 — Diameter
ap ae ap min max mm 3,0 4,0 5,0 6,0 8,0 10,0 12,0 16,0 20,0 25,0
P3
3 x D 0,2 x D 0,5 x D 160 – 180 fz 0,019 0,026 0,033 0,040 0,055 0,067 0,077 0,096 0,111 0,125
4
3 x D 0,2 x D 0,3 x D 140 – 160 fz 0,017 0,024 0,030 0,036 0,049 0,059 0,069 0,084 0,097 0,107
H
1
3 x D 0,2 x D 0,3 x D 120 – 140 fz 0,017 0,024 0,030 0,036 0,049 0,059 0,069 0,084 0,097 0,107
2
3 x D 0,15 x D 0,2 x D 80 – 130 fz 0,013 0,018 0,022 0,027 0,037 0,044 0,051 0,063 0,071 0,078
3
3 x D 0,05 x D – 70 – 100 fz 0,010 0,014 0,018 0,021 0,029 0,035 0,041 0,051 0,059 0,067
4
3 x D 0,03 x D – 50 – 70 fz 0,007 0,009 0,012 0,014 0,019 0,023 0,027 0,034 0,039 0,044
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for fi nishing applications or for lower hardness (machinability) within group.
For better surface fi nish, reduce feed per tooth.
Application Data • Series 7585 7595 • Vision Plus™
Series 7585 7595 • Vision Plus
Material
Group
Side Milling (A)
and Slotting (B) TiAlN Recommended feed per tooth (fz = mm/th) for side milling (A).
For slotting (B), reduce fz by 20%.
AB
Cutting Speed
— vc
m/min
D1 — Diameter
ap ae ap min max mm 4,0 5,0 6,0 8,0 10,0 12,0 14,0 16,0 18,0 20,0 25,0
P3
1 x D 0,4 x D 1 x D 120 – 160 fz 0,019 0,033 0,040 0,055 0,067 0,077 0,077 0,096 0,096 0,111 0,125
4
1 x D 0,4 x D 0,75 x D 90 – 150 fz 0,017 0,030 0,036 0,049 0,059 0,069 0,069 0,084 0,084 0,097 0,107
H
1
1 x D 0,4 x D 0,75 x D 80 – 140 fz 0,017 0,030 0,036 0,049 0,059 0,069 0,069 0,084 0,084 0,097 0,107
2
1 x D 0,3 x D 0,5 x D 70 – 120 fz 0,013 0,022 0,027 0,037 0,044 0,051 0,051 0,063 0,063 0,071 0,078
3
1 x D 0,15 x D 0,3 x D 60 – 90 fz 0,010 0,018 0,021 0,029 0,035 0,041 0,041 0,051 0,051 0,059 0,067
4
1 x D 0,1 x D 0,15 x D 50 – 70 fz 0,007 0,012 0,014 0,019 0,023 0,027 0,027 0,034 0,034 0,039 0,044
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for fi nishing applications or for lower hardness (machinability) within group.
For better surface fi nish, reduce feed per tooth.
WID_Master16_SolidEndMilling_HighPerformance_O198_O199_Metric_REBRAND.indd 199 10/30/15 2:26 PM
O200
LViWID M 16 S lidE dMilli Hi hP f O200 O201 M i REBRANDO b 20 20154 12PM
widia.com
High-Performance Solid Carbide End Mills • Hard Materials
Application Data • Series 75N5 • Vision Plus™
High-Performance Solid Carbide End Mills
Series 75N5 • Vision Plus
Material
Group
Side Milling (A)
and Slotting (B) TiAlN Recommended feed per tooth (fz = mm/th) for side milling (A).
For slotting (B), reduce fz by 20%.
AB
Cutting Speed
— vc
m/min
D1 — Diameter
ap ae ap min max mm 4,0 5,0 6,0 8,0 10,0 12,0 14,0 16,0 18,0 20,0 25,0
P3
1 x D 0,4 x D 1 x D 120 – 160 fz 0,026 0,033 0,040 0,055 0,067 0,077 0,087 0,096 0.,104 0,111 0,125
4
1 x D 0,4 x D 0,75 x D 90 – 150 fz 0,024 0,030 0,036 0,049 0,059 0,069 0,077 0,084 0,091 0,097 0,107
H
1
1 x D 0,4 x D 0,75 x D 80 – 140 fz 0,024 0,030 0,036 0,049 0,059 0,069 0,077 0,084 0,091 0,097 0,107
2
1 x D 0,3 x D 0,5 x D 70 – 120 fz 0,018 0,022 0,027 0,037 0,044 0,051 0,057 0,063 0,067 0,071 0,078
3
1 x D 0,15 x D 0,3 x D 60 – 90 fz 0,014 0,018 0,021 0,029 0,035 0,041 0,046 0,051 0,055 0,059 0,067
4
1 x D 0,1 x D 0,15 x D 50 – 70 fz 0,009 0,012 0,014 0,019 0,023 0,027 0,031 0,034 0,037 0,039 0,044
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for fi nishing applications or for lower hardness (machinability) within group.
For better surface fi nish, reduce feed per tooth.
Application Data • Series 75N8 • Vision Plus™
Series 75N8 • Vision Plus
Material
Group
Side Milling (A)
and Slotting (B) TiAlN Recommended feed per tooth (fz = mm/th) for side milling (A).
For slotting (B), reduce fz by 20%.
AB
Cutting Speed — vc
m/min D1 — Diameter
ap ap ap min max mm 6,0 8,0 10,0 12,0
P3
0,75 x D 0,2 x D 0,2 x D 120 – 160 fz 0,040 0,055 0,067 0,077
4
0,75 x D 0,2 x D 0,2 x D 90 – 150 fz 0,036 0,049 0,059 0,069
H
1
0,75 x D 0,2 x D 0,2 x D 80 – 140 fz 0,036 0,049 0,059 0,069
2
0,75 x D 0,2 x D 0,2 x D 70 – 120 fz 0,027 0,037 0,044 0,051
3
0,75 x D 0,1 x D 0,1 x D 60 – 90 fz 0,021 0,029 0,035 0,041
4
0,75 x D 0,05 x D 0,05 x D 50 – 70 fz 0,014 0,019 0,023 0,027
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for fi nishing applications or for lower hardness (machinability) within group.
For better surface fi nish, reduce feed per tooth.
WID_Master16_SolidEndMilling_HighPerformance_O200_O201_Metric_REBRAND.indd 200 10/30/15 2:26 PM
O201
LViWID M 16 S lidE dMilli Hi hP f O200 O201 M i REBRANDO b 2020154 12PM
widia.com
High-Performance Solid Carbide End Mills • Hard Materials
Application Data • Series 422876 422878 • Vision Plus™
High-Performance Solid Carbide End Mills
Series 422876 422878 • Vision Plus
Material
Group
Side Milling (A)
and Slotting (B)
K10UF-DCHP Recommended feed per tooth (fz = mm/th) for side milling (A).
For slotting (B), reduce fz by 20%.
AlTiN
AB
Cutting Speed — vc
m/min D1 — Diameter
ap ae ap min max mm 4,0 5,0 6,0 8,0 10,0 12,0
P3
0,5 x D 0,4 x D 0,3 x D 120 – 160 fz 0,026 0,033 0,040 0,055 0,067 0,077
4
0,5 x D 0,4 x D 0,3 x D 90 – 150 fz 0,024 0,030 0,036 0,049 0,059 0,069
H
1
0,5 x D 0,4 x D 0,3 x D 80 – 140 fz 0,024 0,030 0,036 0,049 0,059 0,069
2
0,5 x D 0,3 x D 0,2 x D 60 – 80 fz 0,018 0,022 0,027 0,037 0,044 0,051
3
0,5 x D 0,15 x D 0,15 x D 50 – 70 fz 0,014 0,018 0,021 0,029 0,035 0,041
4
0,5 x D 0,1 x D 0,1 x D 40 – 60 fz 0,009 0,012 0,014 0,019 0,023 0,027
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for fi nishing applications or for lower hardness (machinability) within group.
For ap/ae 0,05 x D increase fz by 40%.
For better surface fi nish, reduce feed per tooth.
Application Data • Series 7150 • Vision Plus™
Series 7150 • Vision Plus
Material
Group
Profi le Milling TiAlN Recommended feed per tooth (fz = mm/th) for 3D milling/profi ling (A) — Semi-Finishing
ACutting Speed — vc
m/min D1 — Diameter
ap ae min max mm 1,0 2,0 2,5 3,0 4,0 5,0 6,0 8,0 10,0 12,0
P3
0,1 x D 0,1 x D 240 – 320 fz 0,017 0,034 0,043 0,052 0,070 0,089 0,109 0,150 0,182 0,211
4
0,1 x D 0,1 x D 180 – 300 fz 0,016 0,031 0,040 0,048 0,064 0,081 0,099 0,134 0,162 0,187
H
1
0,1 x D 0,1 x D 160 – 280 fz 0,016 0,031 0,040 0,048 0,064 0,081 0,099 0,134 0,162 0,187
2
0,1 x D 0,1 x D 140 – 240 fz 0,012 0,024 0,030 0,036 0,048 0,061 0,074 0,101 0,121 0,140
3
0,1 x D 0,1 x D 120 – 180 fz 0,009 0,019 0,024 0,028 0,038 0,048 0,058 0,079 0,096 0,112
4
0,1 x D 0,1 x D 100 – 140 fz 0,006 0,012 0,016 0,019 0,025 0,032 0,039 0,053 0,064 0,074
NOTE: Please use the reference table to optimise your cutting speed based on the average cutting angle of the application. See page O205.
WID_Master16_SolidEndMilling_HighPerformance_O200_O201_Metric_REBRAND.indd 201 10/30/15 2:26 PM
O202
LViWID M 16 S lidE dMilli Hi hP f O202 O203 M i REBRANDO b 20 20154 11PM
widia.com
High-Performance Solid Carbide End Mills • Hard Materials
Application Data • Series 7050 7060 • Vision Plus™
High-Performance Solid Carbide End Mills
Series 7050 7060 • Vision Plus
Material
Group
Profi le Milling TiAlN Recommended feed per tooth (fz = mm/th) for 3D milling/profi ling (A) — Semi-Finishing
ACutting Speed — vc
m/min D1 — Diameter
ap ae min max mm 1,0 2,0 2,5 3,0 4,0 5,0 6,0 8,0 10,0 12,0
P3
0,1 x D 0,1 x D 240 – 320 fz 0,017 0,034 0,043 0,052 0,070 0,089 0,109 0,150 0,182 0,211
4
0,1 x D 0,1 x D 180 – 300 fz 0,016 0,031 0,040 0,048 0,064 0,081 0,099 0,134 0,162 0,187
H
1
0,1 x D 0,1 x D 160 – 280 fz 0,016 0,031 0,040 0,048 0,064 0,081 0,099 0,134 0,162 0,187
2
0,1 x D 0,1 x D 140 – 240 fz 0,012 0,024 0,030 0,036 0,048 0,061 0,074 0,101 0,121 0,140
3
0,1 x D 0,1 x D 120 – 180 fz 0,009 0,019 0,024 0,028 0,038 0,048 0,058 0,079 0,096 0,112
4
0,1 x D 0,1 x D 100 – 140 fz 0,006 0,012 0,016 0,019 0,025 0,032 0,039 0,053 0,064 0,074
NOTE: Please use the reference table to optimise your cutting speed based on the average cutting angle of the application. See page O205.
Application Data • Series 422871 • Vision Plus™
Series 422871 • Vision Plus
Material
Group
Profi le Milling K10UF-DCHP Recommended feed per tooth (fz = mm/th) for 3D milling/profi ling (A) — Semi-Finishing
AlTiN
ACutting Speed — vc
m/min D1 — Diameter
ap ae min max mm 3,0 4,0 5,0 6,0 8,0 10,0
P3
0,1 x D 0,05 x D 272 – 306 fz 0,052 0,070 0,089 0,109 0,150 0,182
4
0,1 x D 0,05 x D 238 – 272 fz 0,048 0,064 0,081 0,099 0,134 0,162
H
1
0,07 x D 0,1 x D 200 – 280 fz 0,060 0,080 0,102 0,123 0,168 0,203
2
0,05 x D 0,04 x D 161 – 276 fz 0,052 0,070 0,088 0,107 0,145 0,174
3
0,03 x D 0,03 x D 174 – 261 fz 0,047 0,063 0,079 0,096 0,130 0,158
4
0,03 x D 0,03 x D 145 – 203 fz 0,031 0,042 0,053 0,064 0,087 0,105
NOTE: Please use the reference table to optimise your cutting speed based on the average cutting angle of the application. See page O205.
WID_Master16_SolidEndMilling_HighPerformance_O202_O203_Metric_REBRAND.indd 202 10/30/15 2:26 PM
O203
LViWID M 16 S lidE dMilli Hi hP f O202 O203 M i REBRANDO b 2020154 11PM
widia.com
High-Performance Solid Carbide End Mills • Hard Materials
Application Data • Series D618 • Vision Plus™
High-Performance Solid Carbide End Mills
Series D618 • Vision Plus
Material
Group
Side Milling (A) TiAlN Recommended feed per tooth (fz = mm/th) for side milling (A).
ACutting Speed — vc
m/min D1 — Diameter
ap ae min max mm 3,0 4,0 5,0 6,0 8,0 10,0 12,0 16,0 20,0
P3
2 x D 0,15 x D 120 – 160 fz 0,019 0,026 0,033 0,040 0,055 0,067 0,077 0,096 0,111
4
2 x D 0,15 x D 90 – 150 fz 0,017 0,024 0,030 0,036 0,049 0,059 0,069 0,084 0,097
H
1
2 x D 0,15 x D 80 – 140 fz 0,017 0,024 0,030 0,036 0,049 0,059 0,069 0,084 0,097
2
2 x D 0,15 x D 70 – 120 fz 0,013 0,018 0,022 0,027 0,037 0,044 0,051 0,063 0,071
3
2 x D 0,1 x D 60 – 90 fz 0,010 0,014 0,018 0,021 0,029 0,035 0,041 0,051 0,059
4
2 x D 0,05 x D 50 – 70 fz 0,007 0,009 0,012 0,014 0,019 0,023 0,027 0,034 0,039
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for fi nishing applications or for lower hardness (machinability) within group.
For better surface fi nish, reduce feed per tooth.
Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on diameters >12mm.
Application Data • Series 422837 422831 • Vision Plus™
Series 422837 422831 • Vision Plus
Material
Group
Side Milling (A) K10UF-DCHP Recommended feed per tooth (fz = mm/th) for side milling (A).
AlTiN
ACutting Speed — vc
m/min D1 — Diameter
ap ae min max mm 6,0 8,0 10,0 12,0 16,0 20,0 25,0
P3
1,5 x D 0,2 x D 120 – 160 fz 0,040 0,055 0,067 0,077 0,096 0,111 0,125
4
1,5 x D 0,2 x D 90 – 150 fz 0,036 0,049 0,059 0,069 0,084 0,097 0,107
H
1
1,5 x D 0,2 x D 80 – 140 fz 0,036 0,049 0,059 0,069 0,084 0,097 0,107
2
1,5 x D 0,15 x D 60 – 80 fz 0,027 0,037 0,044 0,051 0,063 0,071 0,078
3
1,5 x D 0,1 x D 50 – 70 fz 0,021 0,029 0,035 0,041 0,051 0,059 0,067
4
1,5 x D 0,05 x D 40 – 60 fz 0,014 0,019 0,023 0,027 0,034 0,039 0,044
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for fi nishing applications or for lower hardness (machinability) within group.
For better surface fi nish, reduce feed per tooth.
For Series 422831, ap max = 2,5 x D by 50% ae.
Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on diameters >12mm.
WID_Master16_SolidEndMilling_HighPerformance_O202_O203_Metric_REBRAND.indd 203 10/30/15 2:26 PM
O204
LViWID M 16 S lidE dMilli Hi hP f O204 O205 M i REBRANDN b 12 20159 29AM
widia.com
High-Performance Solid Carbide End Mills • Hard Materials
Application Data • Series 7670 • Vision Plus™
High-Performance Solid Carbide End Mills
Series 7670 • Vision Plus
Material
Group
Side Milling (A)
and Slotting (B) TiAlN Recommended feed per tooth (fz = mm/th) for side milling (A).
For slotting (B), reduce fz by 10%.
AB
Cutting Speed — vc
m/min D1 — Diameter
ap ae ap min max mm 4,0 5,0 6,0 8,0 10,0 12,0 16,0 20,0 25,0
P
3
0,8 x D 0,5 x D 0,75 x D 160 – 180 fz 0,020 0,025 0,031 0,043 0,051 0,063 0,078 0,101 0,114
4
0,8 x D 0,4 x D 0,5 x D 140 – 160 fz 0,018 0,023 0,028 0,038 0,046 0,056 0,069 0,088 0,098
5
0,8 x D 0,5 x D 0,75 x D 60 – 100 fz 0,016 0,021 0,025 0,034 0,041 0,051 0,063 0,081 0,091
6
0,8 x D 0,4 x D 0,5 x D 50 – 80 fz 0,014 0,017 0,021 0,029 0,034 0,042 0,051 0,065 0,071
M
1
0,8 x D 0,5 x D 0,75 x D 80 – 100 fz 0,020 0,025 0,031 0,043 0,051 0,063 0,078 0,101 0,114
2
0,8 x D 0,4 x D 0,75 x D 60 – 80 fz 0,016 0,021 0,025 0,034 0,041 0,051 0,063 0,081 0,091
3
0,8 x D 0,4 x D 0,75 x D 60 – 80 fz 0,014 0,017 0,021 0,029 0,034 0,042 0,051 0,065 0,071
K
1
0,8 x D 0,5 x D 0,75 x D 120 – 160 fz 0,024 0,031 0,037 0,051 0,061 0,075 0,091 0,114 0,124
2
0,8 x D 0,5 x D 0,75 x D 110 – 140 fz 0,020 0,025 0,031 0,043 0,051 0,063 0,078 0,101 0,114
3
0,8 x D 0,4 x D 0,75 x D 100 – 130 fz 0,016 0,021 0,025 0,034 0,041 0,051 0,063 0,081 0,091
S
1
0,8 x D 0,4 x D 0,75 x D 90 – 115 fz 0,020 0,025 0,031 0,043 0,051 0,063 0,078 0,101 0,114
2
0,8 x D 0,25 x D 0,3 x D 20 – 40 fz 0,011 0,014 0,017 0,022 0,027 0,033 0,042 0,054 0,061
3
0,8 x D 0,4 x D 0,75 x D 50 – 80 fz 0,016 0,021 0,025 0,034 0,041 0,051 0,063 0,081 0,091
4
0,8 x D 0,3 x D 0,5 x D 45 – 65 fz 0,013 0,018 0,022 0,031 0,038 0,046 0,058 0,074 0,084
H
1
0,8 x D 0,5 x D 0,5 x D 120 – 140 fz 0,018 0,023 0,028 0,038 0,046 0,056 0,069 0,088 0,098
2
0,8 x D 0,2 x D 0,3 x D 80 – 130 fz 0,014 0,017 0,021 0,029 0,034 0,042 0,051 0,065 0,071
3
0,8 x D 0,15 x D 0,2 x D 70 – 100 fz 0,011 0,014 0,017 0,023 0,027 0,034 0,041 0,052 0,057
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group.
For rougher tool with 6 flutes, use ap in slotting 60% of table value.
Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters on diameters >12mm.
WID_Master16_SolidEndMilling_HighPerformance_O204_O205_Metric_REBRAND.indd 204 11/12/15 9:56 AM
O205
LViWID M 16 S lidE dMilli Hi hP f O204 O205 M i REBRANDN b 122015929AM
widia.com
Table of Factors for Speed Calculation of Ball Nose
Average Wall ap/D
Angle 0.003 0.006 0.010 0.016 0.020 0.025 0.030
0.0° 9.1 6.5 5.0 4.0 3.6 3.2 2.9
3.0° 6.2 4.9 4.0 3.3 3.0 2.8 2.6
5.0° 5.1 4.2 3.5 3.0 2.8 2.5 2.4
8.0° 4.1 3.4 3.0 2.6 2.4 2.3 2.1
10.0° 3.6 3.1 2.7 2.4 2.3 2.1 2.0
15.0° 2.8 2.5 2.2 2.0 1.9 1.8 1.7
20.0° 2.3 2.1 1.9 1.8 1.7 1.6 1.6
30.0° 1.7 1.6 1.5 1.4 1.4 1.3 1.3
40.0° 1.4 1.3 1.3 1.2 1.2 1.2 1.2
50.0° 1.2 1.2 1.1 1.1 1.1 1.1 1.1
55.0° 1.1 1.1 1.1 1.1 1.1 1.0 1.0
High-Performance Solid Carbide End Mills • Hard Materials
Table of Factors to Maximise Ball Nose Cutting Speed for Hard Machining • Metric
Calculation Examples
High-Performance Solid Carbide End Mills
Material
Group
TiAlN or AlTiN
Basic Cutting Speed Vc
m/min
min max
P3 160 – 180
P4 140 – 160
H1 100 – 140
H2 70 – 120
H3 60–90
H4 50–70
For calculating real cutting speed, use formula: Basic cutting
speed * Factor
Choose the coefficient according to the ap/D and average wall angle.
Example 1:
For Tool = 10mm and ap = 0,2mm for average wall angle 0°, ap/D ratio
equal 0,2/10 = 0,02. Factor equal 3.6.
Example 2:
For Tool = 8mm and ap = 0,1mm for average wall angle 10°, ap/D ratio
equal 0,1/8 = 0,0125. Factor will be between 2.7 and 2.4, choose 2.6.
Keep in mind shank diameter and length effect.
If tool length out of the chuck is more than 2 x D, please decrease feed
per tooth by 15% each 1 x D.
Application example #1 =
face milling a at surface
D = 10mm
ap = 0,2mm
Average wall angle = 0°
Finishing H2
Starting vc from chart = 100
ap/D = 0.02
Factor from table =
3.6
vc to programme into machine = 100 * 3.6 = 360 m/min
RPM = 360* 1000/3.14/10 = 11460 RPM
Application example #2 =
face milling a 10° average wall angle
D = 8mm
ap = 0,1mm
Average wall angle = 10°
Finishing H2
Starting vc from chart = 100
ap/D = 0,1/8 = 0,0125
Factor from table =
2.6
vc to programme into machine = 100 * 2.6 = 260 m/min
RPM = 260* 1000/3.14/10 = 7640 RPM
WID_Master16_SolidEndMilling_HighPerformance_O204_O205_Metric_REBRAND.indd 205 11/12/15 9:56 AM
O206
LViWID M 16 S lidE dMilli Hi hP f O206 O207 M i REBRANDN b 12 20159 30AM
widia.com
High-Performance Solid Carbide End Mills
Trochoidal Milling
• Full slotting limitations:
— Usually not more then ap = 1 x D.
— Conventional and climb milling at the same time.
— High heat development on the tool and on the workpiece.
— Dif cult chip evacuation.
— High radial forces.
• This means:
— No constant chip thickness.
— Low MRR.
— Surface quality from the left to right side are different.
— Limited tool life.
— High power and torque requirements for the machine.
Conventional Slotting
fz = feed per tooth [mm/z]
Feed direction
hm = average chip thickness [mm]
n
WID_Master16_SolidEndMilling_HighPerformance_O206_O207_Metric_REBRAND.indd 206 11/12/15 9:56 AM
O207
LViWID M 16 S lidE dMilli Hi hP f O206 O207 M i REBRANDN b 122015930AM
widia.com
ae and Chip Thickness
High-Performance Solid Carbide End Mills
Trochoidal Milling
To calculate average chip thickness:
Simpli ed formula for shown application and 90° angles on the tool.
The chip thickness de nes the load on the cutting edge.
ae
fz
d1
n
hm
hm = fz • ( )
d1
ae
WID_Master16_SolidEndMilling_HighPerformance_O206_O207_Metric_REBRAND.indd 207 11/12/15 9:56 AM
O208
LViWID M 16 S lidE dMilli Hi hP f O208 O209 M i REBRANDO b 20 20154 11PM
widia.com
High-Performance Solid Carbide End Mills
Trochoidal Milling
chip thinning effect
ae programmed feed (fz) chip thickness (hm)
100% 0,15mm 0,1mm
50% 0,15mm 0,1mm
40% 0,15mm 0,09mm
20% 0,15mm 0,07mm
10% 0,15mm 0,046mm
ae and Chip Thickness
fz = 0,15mm
hm= 0,1mm
hm= 0,09mm
hm = 0,07mm
hm = 0,046mm
40%
20%
10%
50%
100%
The chip thickness needs to be compensated by feed.
fz = 0,15mm
hm= 0,1mm
fz = 0,15mm
fz = 0,15mm
fz = 0,15mm
WID_Master16_SolidEndMilling_HighPerformance_O208_O209_Metric_REBRAND.indd 208 10/30/15 2:26 PM
O209
LViWID M 16 S lidE dMilli Hi hP f O208 O209 M i REBRANDO b 2020154 11PM
widia.com
High-Performance Solid Carbide End Mills
Trochoidal Milling
The chip thickness (h) depends on the helix angle of the cutting edge. If the feed fz is constant, the chip thickness
gets thinner as helix angle rises. That means with more helix angle, the chip gets thinner — or you can rise feed rate
to increase productivity and load to the cutting edge.
Helix Angle and Chip Thickness
The chip thickness (h) is not constant, but de nes the load of the cutting edge. By reducing the load on the cutting edge,
machining at higher speeds is possible through the machining parameters. For easier calculation, use an average chip
thickness hm. When calculating machining data this way cutting data may be compromised because the workpiece is
often a different shape.
Calculation of Chip Thickness
hm [mm] = average chip thickness
qs [°] = engagement angle
ae [mm] = width of engagement
D1 [mm] = outer diameter tool
fz [mm] = feed per tooth
r [°] = lead angle
h [°] = helix angle *
* Solid End Mills: r = 90°-h
NOTE: It makes no difference if the tool is solid or an indexable milling tool.
B
fz
ap r
b
h
hm
qs/2
fz fz
fz qs/2
hm = 360º
qs
ae fz sin r
D
/ •••
•
WID_Master16_SolidEndMilling_HighPerformance_O208_O209_Metric_REBRAND.indd 209 10/30/15 2:26 PM
O210
LViWID M 16 S lidE dMilli Hi hP f O210 O211 M i REBRANDN b 17 20157 05AM
widia.com
High-Performance Solid Carbide End Mills
Trochoidal Milling
In conventional milling, it makes sense to calculate the load to the cutting edge through hm.
With reducing the ae to very low values, you can calculate with the maximum chip thickness
hx to make sure that the feed per tooth is set up correctly.
Conventional
hm = 360º//∙qs∙ae/D∙fz∙sin x
hm [mm] = average chip thickness
fs [°] = engagement angle
ae [mm] = width of engagement
D1 [mm] = outer diameter tool
fz [mm] = feed per tooth
r [°] = lead angle
h [°] = helix angle *
Smart Machining
hx = 360º//∙qs∙2∙ae/D∙fz∙sin x
hx [mm] = maximum chip thickness
fs [°] = engagement angle
ae [mm] = width of engagement
D1 [mm] = outer diameter tool
fz [mm] = feed per tooth
r [°] = lead angle
h [°] = helix angle *
* Solid End Mills: r = 90°-h
Trochoidal Milling can be performed with solid or indexable milling tools.
Differences between hm and hx
WID_Master16_SolidEndMilling_HighPerformance_O210_O211_Metric_REBRAND.indd 210 11/20/15 3:05 PM
O211
LViWID M 16 S lidE dMilli Hi hP f O210 O211 M i REBRANDN b 172015705AM
widia.com
High-Performance Solid Carbide End Mills
Trochoidal Milling
Reduced radial engagement in uences the cutting speed, because the heat produced
through the cutting process limits the cutting speed.
Trochoidal Milling can be performed with solid or indexable milling tools.
ae/D full slot 50% ae 40% ae 30% ae 20% ae 10 % ae 5% ae 4% ae
speed factors 0,9 1 1,1 1,2 1,3 1,4 2,5 3
phi [°] 180 90 78,46 66,42 53,13 36,87 25,84 23,07
Cutting Speed
Heat
Pressure
• Use a tool in which D < b.
• Programme circles in the CNC programme (as a cycle).
• After one circle, repeat the same with an offset.
• Optimise by shortening the lane “in the air” to a form like a “D”.
Static Trochoidal Milling for a Full Slot
F
D
b
ae
WID_Master16_SolidEndMilling_HighPerformance_O210_O211_Metric_REBRAND.indd 211 11/20/15 3:05 PM
O212
LViWID M 16 S lidE dMilli Hi hP f O212 O213 M i REBRANDN b 10 201512 57PM
widia.com
Dynamic Trochoidal Milling
• Transfer the basic idea control of chip thickness to dynamic processes.
• Dynamic adaption of feed in relation to ae and wrap angle through an intelligent CAM Software.
• Using helix interpolation, D-lanes, and morphing cycles.
High-Performance Solid Carbide End Mills
Trochoidal Milling
Requirements
Static trochoidal milling
• Dynamic machine.
• CNC Programme.
• Modern tool.
• Cutting data for trochoidal machining.
Dynamic trochoidal milling
• Dynamic CNC machine.
• CAD/CAM optimisation software.
• Modern tool.
• Cutting data for trochoidal machining.
Benefi ts
• Constant chip thickness.
• Reduced arc/angle engagement (wrap angle).
• Tremendously reduced load on the cutting edge.
• Reduced temperature during the machining process.
• Higher cutting speed and feed per tooth possible.
• Reduced cycle time and increased tool life.
• Better chip evacuation.
• Better usage of the tool length.
• Less torque and power requirements for the machine.
• Less risk of spindle damages through torque uctuation
and reduced torque peaks caused by conventional milling processes.
WID_Master16_SolidEndMilling_HighPerformance_O212_O213_Metric_REBRAND.indd 212 11/10/15 2:20 PM
VariMill III ER provides the highest metal removal rates and superior surface fi nish in the most
demanding workpiece materials in the aerospace industry. WIDIA-Hanita™ combines its
unmatched tooling technology with state-of-the-art surface treatments to deliver the highest
quality and productivity you can rely on when it comes down to critical semi-fi nishing and
fi nishing operations.
• 7-Flute design maximises Metal Removal Rates (MRR) and surface quality.
• Up to 30% radial engagement allowing increased productivity.
• Perfectly suited for high-speed maching techniques such as trochoidal and peel milling.
• Central coolant hole on 2 x D tools for chip evacuation during pocketing.
• Available with SAFE-hOCK® as standard for increased tool life and anti-pullout.
• Available with all common aerospace radii.
To learn more about our innovations, contact your local
Authorised Distributor or visit widia.com.
VariMill III™ ER
WID_Master16_SolidEndMilling_HighPerformance_O212_O213_Metric_REBRAND.indd 213 11/10/15 2:20 PM
O214
LViWID M 16 S lidE dMilli Hi hP f O214 O215 M i REBRANDJ 5 20162 19PM
widia.com
• Reduce scrap rate.
• Higher tool life.
• No need to change
NC programme after
regrinding.
Be on the safe side with SAFE-hOCK®
in High-Performance Cutting (HPC).
• Highly accurate clamping due to positive connection.
• No loss of accuracy.
• No pullout or spinning of the tool.
• No damage to the workpiece or machine.
• Groove on tool shank is directed so the tool will be pulled
into the chuck (depending on direction of rotation).
Order Information
WIDIA™ high-performance end mills with shank diameters of 12mm and larger are available
with SAFE-hOCK® technology, as a special tool, upon request. Please contact your local
customer service location to receive a quote.
Features
• Form-closed clamping.
• High accuracy clamping.
• Helical grooves.
Functions
• No pullout.
• Excellent runout.
• Adjustable clamping length.
Benefi ts
High-Performance Solid Carbide End Mills •
SAFE-hOCK®
In High-Performance Cutting (HPC), slow microcreeping can cause
the cutting tool to be pulled out of the chuck, turning high-quality
workpieces to scrap.
SAFE-hOCK®
SAFE-hOCK®
WID_Master16_SolidEndMilling_HighPerformance_O214_O215_Metric_REBRAND.indd 214 1/5/16 2:20 PM
O215
LViWID M 16 S lidE dMilli Hi hP f O214 O215 M i REBRANDN b 122015932AM
widia.com
Example for Highest Metal Removal Rates (MRR)
The VariMill II ER proprietary design with unequal flute spacing and unique core geometry for
chatter-free machining enables slotting operations in titanium up to 1 x D.
The safety belt for high-performance solid carbide end mills
provide form-closed clamping with high accuracy and helical
grooves for length adjustment.
VariMill II™ ER
SAFE-hOCK®SAFE-hOCK®
WID_Master16_SolidEndMilling_HighPerformance_O214_O215_Metric_REBRAND.indd 215 11/12/15 9:56 AM
LViWID M 16 S lidE dMilli Hi hP f O216 O217 M i REBRANDN b 13 20154 26PM
Partners from Point to Part
Challenges are always better faced with a partner. Getting the most out of a manufacturing
process means a 3-point partnership between the end user, the machine tool builder, and
the tooling provider. The right partner works with you every step of the way, from the point
of the spindle connection to the completed part.
Let WIDIA Machine Tool Industry (MTI) specialists be your partners. We’ll work with you
from pre-planning, time studies, and machine tool selection through setup, runoff, operator
training, and process optimisation. The MTI team focuses simultaneously on engineering,
process and application support, and tool selection. We look at the total solution to get you
where you want and need to be in your manufacturing.
We have MTI specialists in more than 60 countries around the world, so there’s always
someone near you: W-MTI.Solutions@WIDIA.com.
Our mission is to build lasting relationships with all of the focused builders, end users,
and dealers to provide continuous communications and to ensure we have their mind share.
WIDIA is the number one choice of machine tool builders, dealers, and end users globally
for total tooling solutions. We provide world class quality, service, and on-time delivery to
meet and exceed your expectations
Components of a Winning Strategy
WIDIA™ and the Machine Tool Industry (MTI)
• Trust
• Innovation
• Dedicated Support
• Capability
• Engineered Solutions
WID_Master16_SolidEndMilling_HighPerformance_O216_O217_Metric_REBRAND.indd 2 11/13/15 4:26 PM
LViWID M 16 S lidE dMilli Hi hP f O216 O217 M i REBRANDN b 132015426PM
We will provide our customers with a total solution from
spindle connection to the part. We include all brands of the
WIDIA family of companies to enhance this total solution.
Global WIDIA MTI
Global Machine Tool Builders
Our global organisation and network is ensuring a reliable
support at the home of the machine tool builder and the fi nal
place of installation, and following the machines worldwide.
Global Manufacturers
Providing machine tool builders with a long term expertise in
the OEM business and an unreached bandwidth of competitive
technical solutions, consisting of standard, as well as
customised cutting tool technology.
• Simultaneous engineering support from art to part.
• Seamless transition from the initial investment phase to full
production by qualifi ed technical hand-off to local WIDIA staff
at the end user stage, guaranteeing satisfying continued service
and support.
• Starter kits for machine tool equipment.
For more information, contact your local WIDIA
Authorised Distributor or visit widia.com/services.
WID_Master16_SolidEndMilling_HighPerformance_O216_O217_Metric_REBRAND.indd 3 11/13/15 4:26 PM
LViWID M 16 S lidE dMilli G lP P000 P001 M i REBRANDO b 20 20154 16PMLViWID M 16 S lidE dMilli G lP P000 P001 M i REBRANDO b 20 20154 16PM
WID_Master16_SolidEndMilling_GeneralPurpose_P000_P001_Metric_REBRAND.indd 2 10/30/15 2:28 PM
LViWID M 16 S lidE dMilli G lP P000 P001 M i REBRANDO b 2020154 16PM
widia.com P1
LViWID M 16 S lidE dMilli G lP P000 P001 M i REBRANDO b 2020154 16PM
NINA Solid Carbide Roughers and Finishers ...................................................................................................P2–P11
VariMill General Purpose 2-Flute End Mills ...................................................................................................P12–P26
VariMill General Purpose 3-Flute End Mills ...........................................................................................................P28
VariMill General Purpose 4-Flute End Mills ...................................................................................................P30–P44
Solid End Milling • General Purpose Solid Carbide End Mills
WID_Master16_SolidEndMilling_GeneralPurpose_P000_P001_Metric_REBRAND.indd 3 10/30/15 2:28 PM
P2
LViWID M 16 S lidE dMilli G lP P002 P003 M i REBRANDN b 12 20159 34AM
widia.com
NINA is an economic choice for high quality and performance when regrinding is not justifi ed. Designed
to minimise tool costs for applications when short lengths-of-cut are required. NINA has a short, compact
design with minimised vibration and soft cut to support mill-turn machines. A state-of-the-art substrate
and wide range of coatings offers high tool life and stable manufacturing on a wide range of workpiece
materials. With different front end styles (sharp edge, corner chamfer, radii, ball nose, and chamfering
tool), NINA covers a wide range of applications. Roughing and fi nishing with one tool reduces tool
inventory and tool changes providing increased productivity and value.
• One tool for roughing and fi nishing operations.
• Milling at a value price when re-grinding is not justifi ed.
• Stable, low-vibration solution with soft cut for mill-turn machines.
• Wide range of front ends and coatings.
Centre cutting for
drilling and ramping
at unlimited angles.
TiCN, AlTiN, TiAlN,
uncoated for wide range of
workpiece materials.
Short shank for high stability
and low vibration.
Soft cut and short overhang length for
mill-turn machines.
NINA™ Solid Carbide Roughers/Finishers
NINA
WID_Master16_SolidEndMilling_GeneralPurpose_P002_P003_Metric_REBRAND.indd 2 11/12/15 9:57 AM
P3
LViWID M 16 S lidE dMilli G lP P002 P003 M i REBRANDN b 1220159 34AM
widia.com
• Economic price, low-cost carbide substrate.
• Excellent results for applications when short lengths-of-cut are required.
• Reduce tool stock and ease tool management.
• Wide range of applications and materials with one tool.
• Rough and fi nish with one tool.
NINA™ Series
323002/423002/323001/423001 Series 423004/423003 Series
• 3-fl ute.
• Sharp edge front end.
• TiCN/AlTiN coating.
• For steel, stainless steel,
cast iron, and aluminium.
• Centre cutting.
• 4-fl ute.
• Chamfer end for improved
tool life.
• AlTiN coating.
• For steel, stainless steel,
and cast iron.
• Centre cutting.
423048/423047 Series 423039/423008 Series
• 2-fl ute.
• Radii for improved tool life and
wider application range.
• AlTiN coating.
• For steel, stainless steel, and
non-ferrous.
• Centre cutting.
• 2-fl ute.
• Ball nose for 3D profi ling.
• AlTiN coating.
• For steel, stainless steel,
and non-ferrous.
• Centre cutting.
423036/423037 Series
• 4-fl ute.
• 90° point angle.
• AlTiN/TiAlN coating.
• For widest range of materials.
WID_Master16_SolidEndMilling_GeneralPurpose_P002_P003_Metric_REBRAND.indd 3 11/12/15 9:57 AM
P4
LViWID M 16 S lidE dMilli G lP P004 P005 M i REBRANDO b 20 20154 17PM
widia.com
K30F-DCF K30F-DCF K30F-TICN K30F-TICN
General Purpose Solid Carbide End Mills • Roughing/Finishing
Series 423002 323002 423001 323001 • NINA™
End Mill Tolerances
D1
tolerance h10
+ / - D
tolerance h6
+ / -
) 3 0/0,04 ) 3 0/0,006
> 3–6 0/0,048 > 3–6 0/0,008
> 6–10 0/0,058 > 6–10 0/0,009
> 10–18 0/0,070 > 10–18 0/0,011
> 18–30 0/0,084 > 18–30 0/0,013
Series 423002 323002 423001 323001 • NINA
General Purpose Solid Carbide End Mills
• Centre cutting.
• Standard items listed. Additional styles
and coatings made-to-order.
rst choice
alternate choice
grade K30F-DCF
TiAlN
order # catalogue #
grade K30F-DCF
TiAlN
order # catalogue #
grade K30F-TiCN
TiCN
order # catalogue #
grade K30F-TiCN
TiCN
order # catalogue # D1 D
length of cut
Ap1 max
length
L
2627990 423002-000020 2343352 423001-000020 2627800 323002-000020 2336740 323001-000020 2,0 6 4,00 38
2628043 423002-000030 2343354 423001-000030 2627801 323002-000030 2336747 323001-000030 3,0 6 5,00 38
2628044 423002-000040 2343356 423001-000040 2627802 323002-000040 2336753 323001-000040 4,0 6 7,00 38
2628045 423002-000050 2343358 423001-000050 2627983 323002-000050 2336759 323001-000050 5,0 6 8,00 38
2628046 423002-000060 2343360 423001-000060 2627984 323002-000060 2336765 323001-000060 6,0 6 8,00 38
2628047 423002-000080 2343362 423001-000080 2627985 323002-000080 2336771 323001-000080 8,0 8 11,00 43
2628048 423002-000100 2343364 423001-000100 2627986 323002-000100 2336777 323001-000100 10,0 10 13,00 50
2628049 423002-000120 2343366 423001-000120 2627987 323002-000120 2336783 323001-000120 12,0 12 15,00 55
NOTE: For application data, please see page P9.
WID_Master16_SolidEndMilling_GeneralPurpose_P004_P005_Metric_REBRAND.indd 4 10/30/15 2:29 PM
P5
LViWID M 16 S lidE dMilli G lP P004 P005 M i REBRANDO b 2020154 17PM
widia.com
K30F-DCHP K30F-DCHP
General Purpose Solid Carbide End Mills • Roughing/Finishing
Series 423004 423003 • NINA™
Series 423004 423003 • NINA
• Centre cutting.
• HPC.
• Standard items listed. Additional styles
and coatings made-to-order.
rst choice
alternate choice
End Mill Tolerances
D1
tolerance h10
+ / - D
tolerance h6
+ / -
) 3 0/0,04 ) 3 0/0,006
> 3–6 0/0,048 > 3–6 0/0,008
> 6–10 0/0,058 > 6–10 0/0,009
> 10–18 0/0,070 > 10–18 0/0,011
> 18–30 0/0,084 > 18–30 0/0,013
General Purpose Solid Carbide End Mills
grade K30F-DCHP
AlTiN
order # catalogue #
grade K30F-DCHP
AlTiN
order # catalogue # D1 D
length of cut
Ap1 max
length
L BCH
3657761 423004-000040 3657756 423003-000040 4,0 6 7,00 38 0,40
3657762 423004-000060 3657757 423003-000060 6,0 6 8,00 38 0,40
3657763 423004-000080 3657758 423003-000080 8,0 8 11,00 43 0,40
3657764 423004-000100 3657759 423003-000100 10,0 10 13,00 50 0,50
3657765 423004-000120 3657760 423003-000120 12,0 12 15,00 55 0,50
NOTE: For application data, please see page P9.
Detail X
WID_Master16_SolidEndMilling_GeneralPurpose_P004_P005_Metric_REBRAND.indd 5 10/30/15 2:29 PM
P6
LViWID M 16 S lidE dMilli G lP P006 P007 M i REBRANDN b 12 20159 35AM
widia.com
K30F-DCHP K30F-DCHP
General Purpose Solid Carbide End Mills • Roughing/Finishing
Series 423048 423047 • NINA™
End Mill Tolerances
D1
tolerance h10
+ / - D
tolerance h6
+ / -
) 3 0/0,04 ) 3 0/0,006
> 3–6 0/0,048 > 3–6 0/0,008
> 6–10 0/0,058 > 6–10 0/0,009
> 10–18 0/0,070 > 10–18 0/0,011
> 18–30 0/0,084 > 18–30 0/0,013
Series 423048 423047 • NINA
General Purpose Solid Carbide End Mills
• Centre cutting.
• Standard items listed. Additional styles
and coatings made-to-order.
rst choice
alternate choice
grade K30F-DCHP
TiAlN
order # catalogue #
grade K30F-DCHP
TiAlN
order # catalogue # D1 D
length of cut
Ap1 max
length
LR¡
2343564 423048-000020 2343548 423047-000020 2,0 6 4,00 38 0,50
2343566 423048-000030 2343550 423047-000030 3,0 6 5,00 38 0,50
2343568 423048-000040 2343552 423047-000040 4,0 6 7,00 38 0,50
2343570 423048-000050 2343554 423047-000050 5,0 6 8,00 38 0,50
2343572 423048-000060 2343556 423047-000060 6,0 6 8,00 38 1,00
2343574 423048-000080 2343558 423047-000080 8,0 8 11,00 43 2,00
2343576 423048-000100 2343560 423047-000100 10,0 10 13,00 50 3,00
2343579 423048-000120 2343562 423047-000120 12,0 12 15,00 55 3,00
NOTE: For application data, please see page P10.
WID_Master16_SolidEndMilling_GeneralPurpose_P006_P007_Metric_REBRAND.indd 6 11/12/15 9:57 AM
P7
LViWID M 16 S lidE dMilli G lP P006 P007 M i REBRANDN b 1220159 35AM
widia.com
K30F-DCHP K30F-DCHP
General Purpose Solid Carbide End Mills • Roughing/Finishing
Series 423039 423038 • NINA™
Series 423039 423038 • NINA
• Centre cutting.
• Standard items listed. Additional styles
and coatings made-to-order.
rst choice
alternate choice
End Mill Tolerances
D1
tolerance h10
+ / - D
tolerance h6
+ / -
) 3 0/0,04 ) 3 0/0,006
> 3–6 0/0,048 > 3–6 0/0,008
> 6–10 0/0,058 > 6–10 0/0,009
> 10–18 0/0,070 > 10–18 0/0,011
> 18–30 0/0,084 > 18–30 0/0,013
General Purpose Solid Carbide End Mills
grade K30F-DCHP
TiAlN
order # catalogue #
grade K30F-DCHP
TiAlN
order # catalogue # D1 D
length of cut
Ap1 max
length
L
2343531 423039-000020 2343514 423038-000020 2,0 6 4,00 38
2343533 423039-000030 2343516 423038-000030 3,0 6 5,00 38
2343535 423039-000040 2343519 423038-000040 4,0 6 7,00 38
2343537 423039-000050 2343521 423038-000050 5,0 6 8,00 38
2343539 423039-000060 2343523 423038-000060 6,0 6 8,00 38
2343541 423039-000080 2343525 423038-000080 8,0 8 11,00 43
2343543 423039-000100 2343527 423038-000100 10,0 10 13,00 50
2343545 423039-000120 2343529 423038-000120 12,0 12 15,00 55
NOTE: For application data, please see page P10.
WID_Master16_SolidEndMilling_GeneralPurpose_P006_P007_Metric_REBRAND.indd 7 11/12/15 9:57 AM
P8
LViWID M 16 S lidE dMilli G lP P008 P009 M i REBRANDN b 11 20159 07AM
widia.com
K30F-DCF K30F-DCHP
General Purpose Solid Carbide End Mills • Roughing/Finishing
Series 423036 423037 • NINA™
End Mill Tolerances
D1
tolerance h10
+ / - D
tolerance h6
+ / -
) 3 0/0,04 ) 3 0/0,006
> 3–6 0/0,048 > 3–6 0/0,008
> 6–10 0/0,058 > 6–10 0/0,009
> 10–18 0/0,070 > 10–18 0/0,011
> 18–30 0/0,084 > 18–30 0/0,013
Series 423036 423037 • NINA
grade K30F-DCF
TiAlN
order # catalogue #
grade K30F-DCHP
AlTiN
order # catalogue # D1 D
length of cut
Ap1 max
length
L
2343508 423036-000060 — 6,0 6 1,00 38
— 2628498 423037-000060 6,0 6 1,00 83
2343510 423036-000080 — 8,0 8 1,50 43
— 2628499 423037-000080 8,0 8 1,50 104
2343512 423036-000100 — 10,0 10 2,00 50
— 2628500 423037-000100 10,0 10 2,00 125
General Purpose Solid Carbide End Mills
• Non-centre cutting.
• Chamfering.
• Standard items listed. Additional styles
and coatings made-to-order.
rst choice
alternate choice
NOTE: For application data, please see page P11.
WID_Master16_SolidEndMilling_GeneralPurpose_P008_P009_Metric_REBRAND.indd 8 11/11/15 9:38 AM
P9
LViWID M 16 S lidE dMilli G lP P008 P009 M i REBRANDN b 1120159 07AM
widia.com
General Purpose Solid Carbide End Mills • Roughing/Finishing
Application Data • Series 423002 323002 423001 323001 • NINA™
General Purpose Solid Carbide End Mills
Series 423002 323002 423001 323001 • NINA
Material
Group
Side Milling (A)
and Slotting (B)
K30F-TICN K30F-DCF Recommended feed per tooth (fz = mm/th) for side milling (A).
For slotting (B), reduce fz by 20%.
TiCN TiAlN
AB
Cutting Speed
— vc
m/min
Cutting Speed
— vc
m/min
D1 — Diameter
ap ae ap min – max min – max mm 2,0 3,0 4,0 5,0 6,0 8,0 10,0 12,0
P
0
0,75 x D 0,5 x D 0,5 x D 150 – 200 150 – 200 fz 0,014 0,021 0,028 0,036 0,044 0,060 0,072 0,083
1
0,75 x D 0,5 x D 0,5 x D 150 – 200 150 – 200 fz 0,014 0,021 0,028 0,036 0,044 0,060 0,072 0,083
2
0,75 x D 0,5 x D 0,5 x D 140 – 190 140 – 190 fz 0,014 0,021 0,028 0,036 0,044 0,060 0,072 0,083
3
0,75 x D 0,5 x D 0,5 x D 120 – 160 120 – 160 fz 0,011 0,017 0,023 0,030 0,036 0,050 0,061 0,070
4
0,75 x D 0,5 x D 0,5 x D 90 – 150 90 – 150 fz 0,010 0,016 0,021 0,027 0,033 0,045 0,054 0,062
M1
0,75 x D 0,5 x D 0,5 x D 90 – 115 90 – 115 fz 0,011 0,017 0,023 0,030 0,036 0,050 0,061 0,070
2
0,75 x D 0,5 x D 0,5 x D 60 – 80 60 – 80 fz 0,009 0,014 0,019 0,024 0,029 0,040 0,048 0,056
K1
0,75 x D 0,5 x D 0,5 x D 120 – 150 120 – 150 fz 0,014 0,021 0,028 0,036 0,044 0,060 0,072 0,083
2
0,75 x D 0,5 x D 0,5 x D 110 – 140 110 – 140 fz 0,011 0,017 0,023 0,030 0,036 0,050 0,061 0,070
N
1
0,75 x D 0,5 x D 0,5 x D 500 – 2000 500 – 2000 fz 0,020 0,030 0,040 0,050 0,060 0,080 0,100 0,120
2
0,75 x D 0,5 x D 0,5 x D 500 – 1500 500 – 1500 fz 0,018 0,027 0,036 0,045 0,054 0,072 0,090 0,108
5
0,75 x D 0,5 x D 0,5 x D 250 – 1000 250 – 1000 fz 0,018 0,027 0,036 0,045 0,054 0,072 0,090 0,108
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for fi nishing applications or for lower hardness (machinability) within group.
Series 423004 423003 • NINA
Material
Group
Side Milling (A)
and Slotting (B)
K30F-DCHP Recommended feed per tooth (fz = mm/th) for side milling (A).
For slotting (B), reduce fz by 20%.
AlTiN
AB
Cutting Speed — vc
m/min D1 — Diameter
ap ae ap min – max mm 4,0 5,0 6,0 8,0 10,0 12,0
P
0
1 x D 0,5 x D 1 x D 150 – 200 fz 0,028 0,036 0,044 0,060 0,072 0,083
1
1 x D 0,5 x D 1 x D 150 – 200 fz 0,028 0,036 0,044 0,060 0,072 0,083
2
1 x D 0,5 x D 1 x D 140 – 190 fz 0,028 0,036 0,044 0,060 0,072 0,083
3
1 x D 0,5 x D 1 x D 120 – 160 fz 0,023 0,030 0,036 0,050 0,061 0,070
4
1 x D 0,5 x D 1 x D 90 – 150 fz 0,021 0,027 0,033 0,045 0,054 0,062
M1
1 x D 0,5 x D 1 x D 90 – 115 fz 0,023 0,030 0,036 0,050 0,061 0,070
2
1 x D 0,5 x D 1 x D 60 – 80 fz 0,019 0,024 0,029 0,040 0,048 0,056
K
1
1 x D 0,5 x D 1 x D 120 – 150 fz 0,028 0,036 0,044 0,060 0,072 0,083
2
1 x D 0,5 x D 1 x D 110 – 140 fz 0,023 0,030 0,036 0,050 0,061 0,070
3
1 x D 0,5 x D 1 x D 110 – 130 fz 0,019 0,024 0,029 0,040 0,048 0,056
N
1
1 x D 0,5 x D 1 x D 500 – 2000 fz 0,040 0,050 0,060 0,080 0,100 0,120
2
1 x D 0,5 x D 1 x D 500 – 1500 fz 0,036 0,045 0,054 0,072 0,090 0,108
3
1 x D 0,5 x D 1 x D 250 – 1000 fz 0,036 0,045 0,054 0,072 0,090 0,108
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for fi nishing applications or for lower hardness (machinability) within group.
Application Data • Series 423004 423003 • NINA
WID_Master16_SolidEndMilling_GeneralPurpose_P008_P009_Metric_REBRAND.indd 9 11/11/15 9:38 AM
P10
LViWID M 16 S lidE dMilli G lP P010 P011 M i REBRANDN b 12 20159 35AM
widia.com
General Purpose Solid Carbide End Mills • Roughing/Finishing
Application Data • Series 423048 423047 • NINA™
General Purpose Solid Carbide End Mills
Series 423048 423047 • NINA
Material
Group
Side Milling (A)
and Slotting (B)
K30F-DCHP Recommended feed per tooth (fz = mm/th) for side milling (A).
For slotting (B), reduce fz by 20%.
AlTiN
AB
Cutting Speed — vc
m/min D1 — Diameter
ap ae ap min – max mm 4,0 5,0 6,0 8,0 10,0 12,0
P
0
0,75 x D 0,5 x D 0,5 x D 150 – 200 fz 0,028 0,036 0,044 0,060 0,072 0,083
1
0,75 x D 0,5 x D 0,5 x D 150 – 200 fz 0,028 0,036 0,044 0,060 0,072 0,083
2
0,75 x D 0,5 x D 0,5 x D 140 – 190 fz 0,028 0,036 0,044 0,060 0,072 0,083
3
0,75 x D 0,5 x D 0,5 x D 120 – 160 fz 0,023 0,030 0,036 0,050 0,061 0,070
4
0,75 x D 0,5 x D 0,5 x D 90 – 150 fz 0,021 0,027 0,033 0,045 0,054 0,062
M1
0,75 x D 0,5 x D 0,5 x D 90 – 115 fz 0,023 0,030 0,036 0,050 0,061 0,070
2
0,75 x D 0,5 x D 0,5 x D 60 – 80 fz 0,019 0,024 0,029 0,040 0,048 0,056
K1
0,75 x D 0,5 x D 0,5 x D 120 – 150 fz 0,028 0,036 0,044 0,060 0,072 0,083
2
0,75 x D 0,5 x D 0,5 x D 110 – 140 fz 0,023 0,030 0,036 0,050 0,061 0,070
N
1
0,75 x D 0,5 x D 0,5 x D 500 – 2000 fz 0,040 0,050 0,060 0,080 0,100 0,120
2
0,75 x D 0,5 x D 0,5 x D 500 – 1500 fz 0,036 0,045 0,054 0,072 0,090 0,108
5
0,75 x D 0,5 x D 0,5 x D 250 – 1000 fz 0,036 0,045 0,054 0,072 0,090 0,108
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for fi nishing applications or for lower hardness (machinability) within group.
Application Data • Series 423039 423038 • NINA
Series 423039 423038 • NINA
Material
Group
Side Milling (A)
and Slotting (B)
K30F-DCHP Recommended feed per tooth (fz = mm/th) for 3D milling/profi ling
AlTiN
AB
Cutting Speed — vc
m/min D1 — Diameter
ap ae ap min – max mm 4,0 5,0 6,0 8,0 10,0 12,0
P
0
0,75 x D 0,5 x D 0,5 x D 150 – 200 fz 0,028 0,036 0,044 0,060 0,072 0,083
1
0,75 x D 0,5 x D 0,5 x D 150 – 200 fz 0,028 0,036 0,044 0,060 0,072 0,083
2
0,75 x D 0,5 x D 0,5 x D 140 – 190 fz 0,028 0,036 0,044 0,060 0,072 0,083
3
0,75 x D 0,5 x D 0,5 x D 120 – 160 fz 0,023 0,030 0,036 0,050 0,061 0,070
4
0,75 x D 0,5 x D 0,5 x D 90 – 150 fz 0,021 0,027 0,033 0,045 0,054 0,062
M1
0,75 x D 0,5 x D 0,5 x D 90 – 115 fz 0,023 0,030 0,036 0,050 0,061 0,070
2
0,75 x D 0,5 x D 0,5 x D 60 – 80 fz 0,019 0,024 0,029 0,040 0,048 0,056
K1
0,75 x D 0,5 x D 0,5 x D 120 – 150 fz 0,028 0,036 0,044 0,060 0,072 0,083
2
0,75 x D 0,5 x D 0,5 x D 110 – 140 fz 0,023 0,030 0,036 0,050 0,061 0,070
N
1
0,75 x D 0,5 x D 0,5 x D 500 – 2000 fz 0,040 0,050 0,060 0,080 0,100 0,120
2
0,75 x D 0,5 x D 0,5 x D 500 – 1500 fz 0,036 0,045 0,054 0,072 0,090 0,108
5
0,75 x D 0,5 x D 0,5 x D 250 – 1000 fz 0,036 0,045 0,054 0,072 0,090 0,108
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for fi nishing applications or for lower hardness (machinability) within group.
WID_Master16_SolidEndMilling_GeneralPurpose_P010_P011_Metric_REBRAND.indd 10 11/12/15 9:57 AM
P11
LViWID M 16 S lidE dMilli G lP P010 P011 M i REBRANDN b 1220159 35AM
widia.com
General Purpose Solid Carbide End Mills • Roughing/Finishing
Application Data • Series 423036 423037 • NINA™
General Purpose Solid Carbide End Mills
Series 423036 423037 • NINA
Material
Group
Chamfer Milling K30F-DCF K30F-DCHP Recommended feed per tooth (fz = mm/th)
for chamfering (A)
TiAlN AlTiN
ACutting Speed — vc
m/min
Cutting Speed — vc
m/min D1 — Diameter
ap ae min – max min – max mm 6,0 8,0 10,0
P
0
0,35 x D 0,35 x D 150 – 200 150 – 200 fz 0,035 0,048 0,058
1
0,35 x D 0,35 x D 150 – 200 150 – 200 fz 0,035 0,048 0,058
2
0,35 x D 0,35 x D 140 – 190 140 – 190 fz 0,035 0,048 0,058
3
0,35 x D 0,35 x D 120 – 160 120 – 160 fz 0,029 0,040 0,048
4
0,35 x D 0,35 x D 90 – 150 90 – 150 fz 0,026 0,036 0,043
5
0,35 x D 0,35 x D 60 – 100 60 – 100 fz 0,024 0,032 0,039
6
0,35 x D 0,35 x D 50 – 75 50 – 75 fz 0,020 0,027 0,032
M
1
0,35 x D 0,35 x D 90 – 115 90 – 115 fz 0,029 0,040 0,048
2
0,35 x D 0,35 x D 60 – 80 60 – 80 fz 0,024 0,032 0,039
3
0,35 x D 0,35 x D 60 – 70 60 – 70 fz 0,020 0,027 0,032
K
1
0,35 x D 0,35 x D 120 – 150 120 – 150 fz 0,035 0,048 0,058
2
0,35 x D 0,35 x D 110 – 140 110 – 140 fz 0,029 0,040 0,048
3
0,35 x D 0,35 x D 110 – 130 110 – 130 fz 0,024 0,032 0,039
N
1
0,35 x D 0,35 x D 500 – 2000 500 – 2000 fz 0,048 0,064 0,080
2
0,35 x D 0,35 x D 500 – 1500 500 – 1500 fz 0,043 0,058 0,072
3
0,35 x D 0,35 x D 500 – 1500 500 – 1500 fz 0,034 0,045 0,056
4
0,35 x D 0,35 x D 400 – 750 400 – 750 fz 0,038 0,051 0,064
5
0,35 x D 0,35 x D 250 – 1000 250 – 1000 fz 0,043 0,058 0,072
6
0,35 x D 0,35 x D 100 – 750 100 – 750 fz 0,048 0,064 0,080
7
0,35 x D 0,35 x D 100 – 750 100 – 750 fz 0,034 0,045 0,056
S
1
0,35 x D 0,35 x D 50 – 90 50 – 90 fz 0,029 0,040 0,048
2
0,35 x D 0,35 x D 25 – 40 25 – 40 fz 0,016 0,021 0,026
3
0,35 x D 0,35 x D 60 – 80 60 – 80 fz 0,024 0,032 0,039
4
0,35 x D 0,35 x D 50 – 60 50 – 60 fz 0,021 0,029 0,036
H1
0,35 x D 0,35 x D 80 – 140 80 – 140 fz 0,026 0,036 0,043
WID_Master16_SolidEndMilling_GeneralPurpose_P010_P011_Metric_REBRAND.indd 11 11/12/15 9:57 AM
P12
LViWID M 16 S lidE dMilli G lP P012 P013 M i REBRANDN b 12 20159 37AM
widia.com
VariMill GP • 2-Flute
• General purpose tools for a wide range of workpiece materials.
• Roughing and fi nishing with one tool.
• Various lengths-of-cut and overall lengths with different front end designs available.
• Two fl utes for high fl exibility in unstable conditions.
VariMill GP offers plunging, slotting, and profi ling for a wide range of
materials and applications. Designed to provide high metal removal
rates and excellent surface conditions at a value price. A wide range of
diameters, lengths, and corner styles (such as chamfered, sharp edge,
and ball nose) are available from stock.
Eccentric Relief
Edge strength and stability.
30° Helix Angle
For roughing and
fi nishing.
High-Quality Substrate
Improved tool life and MRR.
Centre Cutting
For plunging and ramping.
TiAlN PVD Coating
High Metal Removal Rates (MRR)
and tool life.
General Purpose 2-Flute End Mills •
VariMill™ GP
VariMill GP
WID_Master16_SolidEndMilling_GeneralPurpose_P012_P013_Metric_REBRAND.indd 12 11/12/15 9:57 AM
P13
LViWID M 16 S lidE dMilli G lP P012 P013 M i REBRANDN b 1220159 37AM
widia.com
VariMill™ GP
• Increased manufacturing fl exibility and reduced tooling cost.
• Fewer tool changes and high Metal Removal Rates (MRR).
• Eccentric relief for improved edge stability and high tool life.
• Easy and cost-effi cient regrinding due to eccentric relief.
D002/D012 Series 2819 Series
• Centre cutting.
• DIN 6527 standard
dimensions — short
and long.
• Steel, stainless steel,
and cast iron.
• Corner chamfer for
increased tool life.
• Centre cutting.
• DIN 6528 standard
dimensions.
• Steel, stainless steel,
and cast iron.
• Corner chamfer for
increased tool life.
4002/4012/4022 Series D001/D011 Series
• Centre cutting.
• Wide range of lengths-of-cut —
regular, long, and extra long.
• Steel, stainless steel,
and cast iron.
• Corner chamfer for
increased tool life.
• DIN 6527 standard
dimensions — short
and long.
• Steel, stainless steel,
and cast iron.
• Centre cut ball nose.
2838 Series 4001/4011/4021 Series
• DIN 6528 standard
dimensions.
• Steel, stainless steel,
and cast iron.
• Centre cut ball nose.
• Wide range of lengths-of-
cut — regular, long,
and extra long.
• Steel, stainless steel,
and cast iron.
• Centre cut ball nose.
WID_Master16_SolidEndMilling_GeneralPurpose_P012_P013_Metric_REBRAND.indd 13 11/12/15 9:57 AM
P14
LViWID M 16 S lidE dMilli G lP P014 P015 M i REBRANDN b 12 20159 38AM
widia.com
UNCOATED TiAlN UNCOATED TiAlN
General Purpose Solid Carbide End Mills • Roughing/Finishing
Series D002 D012 • VariMill™ GP
Series D002 D012 • VariMill GP
grade UNCOATED
order # catalogue #
grade TiAlN
TiAlN
order # catalogue #
grade UNCOATED
order # catalogue #
grade TiAlN
TiAlN
order # catalogue # D1 D
length of cut
Ap1 max
length
L BCH
5877567 D0020200T003 5877330 D0020200T003 — — 2,0 6 3,00 50 —
5877568 D0020250T003 5877501 D0020250T003 — — 2,5 6 3,00 50 —
5877569 D0120250T007 5877502 D0120250T007 — — 2,5 6 7,00 57 —
5877571 D0020300T004 5877503 D0020300T004 — — 3,0 6 4,00 50 —
5877572 D0120300T007 5877504 D0120300T007 — — 3,0 6 7,00 57 —
5877573 D0020350T004 5877505 D0020350T004 — — 3,5 6 4,00 50 —
5877574 D0020400T005 5877506 D0020400T005 — — 4,0 6 5,00 54 0,10
5877575 D0120400T008 5877507 D0120400T008 — — 4,0 6 8,00 57 0,10
5877576 D0020450T005 5877509 D0020450T005 — — 4,5 6 5,00 54 0,10
5877577 D0120450T008 5877510 D0120450T008 — — 4,5 6 8,00 57 0,10
5877578 D0020500T006 5877511 D0020500T006 — — 5,0 6 6,00 54 0,10
5877579 D0120500T010 5877512 D0120500T010 — — 5,0 6 10,00 57 0,10
5877581 D0020600T007 5877513 D0020600T007 — — 6,0 6 7,00 54 0,10
5877582 D0120600T010 5877514 D0120600T010 — — 6,0 6 10,00 57 0,10
5877583 D0020700T008 5877515 D0020700T008 — — 7,0 8 8,00 58 0,10
5877584 D0120700T013 5877516 D0120700T013 — — 7,0 8 13,00 63 0,10
5877585 D0020800T009 5877517 D0020800T009 — — 8,0 8 9,00 58 0,20
5877586 D0120800T016 5877518 D0120800T016 — — 8,0 8 16,00 63 0,20
5877588 D0020900T010 5877520 D0020900T010 — — 9,0 10 10,00 66 0,20
5877589 D0120900T016 5877521 D0120900T016 — — 9,0 10 16,00 72 0,20
• Centre cutting.
• Chamfered corners.
• Standard items listed. Additional styles
and coatings made-to-order.
rst choice
alternate choice
End Mill Tolerances
D1 tolerance e8 D
tolerance h6
+ / -
) 3 -0,014/-0,028 ) 3 0/0,006
> 3–6 -0,020/-0,038 > 3–6 0/0,008
> 6–10 -0,025/-0,047 > 6–10 0/0,009
> 10–18 -0,032/-0,059 > 10–18 0/0,011
> 18–30 -0,040/-0,073 > 18–30 0/0,013
General Purpose Solid Carbide End Mills
(continued)
Detail X
WID_Master16_SolidEndMilling_GeneralPurpose_P014_P015_Metric_REBRAND.indd 14 11/12/15 9:57 AM
P15
LViWID M 16 S lidE dMilli G lP P014 P015 M i REBRANDN b 1220159 38AM
widia.com
UNCOATED TiAlN UNCOATED TiAlN
General Purpose Solid Carbide End Mills • Roughing/Finishing
Series D002 D012 • VariMill™ GP
grade UNCOATED
order # catalogue #
grade TiAlN
TiAlN
order # catalogue #
grade UNCOATED
order # catalogue #
grade TiAlN
TiAlN
order # catalogue # D1 D
length of cut
Ap1 max
length
L BCH
5877590 D0021000T011 5877522 D0021000T011 — — 10,0 10 11,00 66 0,20
5877591 D0121000T019 5877523 D0121000T019 — — 10,0 10 19,00 72 0,20
5877592 D0021200T012 5877524 D0021200T012 5877556 D0021200W012 5877535 D0021200W012 12,0 12 12,00 73 0,30
5877593 D0121200T022 5877525 D0121200T022 5877557 D0121200W022 5877537 D0121200W022 12,0 12 22,00 83 0,30
5877594 D0021400T014 5877526 D0021400T014 5877558 D0021400W014 5877538 D0021400W014 14,0 14 14,00 75 0,30
5877595 D0121400T022 5877527 D0121400T022 5877559 D0121400W022 5877539 D0121400W022 14,0 14 22,00 83 0,30
5877596 D0021600T016 5877529 D0021600T016 5877560 D0021600W016 5877540 D0021600W016 16,0 16 16,00 82 0,30
5877597 D0121600T026 5877530 D0121600T026 5877561 D0121600W026 5877551 D0121600W026 16,0 16 26,00 92 0,30
5877598 D0021800T018 5877531 D0021800T018 5877563 D0021800W018 5877552 D0021800W018 18,0 18 18,00 84 0,30
5877599 D0121800T026 5877532 D0121800T026 5877564 D0121800W026 5877553 D0121800W026 18,0 18 26,00 92 0,30
5877601 D0022000T020 5877533 D0022000T020 5877565 D0022000W020 5877554 D0022000W020 20,0 20 20,00 92 0,30
5877602 D0122000T032 5877534 D0122000T032 5877566 D0122000W032 5877555 D0122000W032 20,0 20 32,00 104 0,30
NOTE: For application data, please see page P23.
rst choice
alternate choice
General Purpose Solid Carbide End Mills
(Series D002 D012 • VariMill GP — continued)
Detail X
WID_Master16_SolidEndMilling_GeneralPurpose_P014_P015_Metric_REBRAND.indd 15 11/12/15 9:57 AM
P16
LViWID M 16 S lidE dMilli G lP P016 P017 M i REBRANDO b 20 20154 19PM
widia.com
UNCOATED - .. TiAlN
General Purpose Solid Carbide End Mills • Roughing/Finishing
Series 2819 • VariMill™ GP
End Mill Tolerances
D1 tolerance e8 D
tolerance h6
+ / -
) 3 -0,014/-0,028 ) 3 0/0,006
> 3–6 -0,020/-0,038 > 3–6 0/0,008
> 6–10 -0,025/-0,047 > 6–10 0/0,009
> 10–18 -0,032/-0,059 > 10–18 0/0,011
> 18–30 -0,040/-0,073 > 18–30 0/0,013
Series 2819 • VariMill GP
grade UNCOATED
order # catalogue #
grade TiAlN
TiAlN
order # catalogue # D1 D
length of cut
Ap1 max
length
L BCH
5877617 28190300T007 5877603 28190300T007 3,0 3 8,00 50 —
5877618 28190400T008 5877604 28190400T008 4,0 4 8,00 50 0,10
5877619 28190500T010 5877605 28190500T010 5,0 5 10,00 50 0,10
5877620 28190600T010 5877606 28190600T010 6,0 6 10,00 57 0,10
5877621 28190700T013 5877607 28190700T013 7,0 7 13,00 60 0,10
5877622 28190800T016 5877608 28190800T016 8,0 8 16,00 63 0,20
5877623 28190900T016 5877609 28190900T016 9,0 9 16,00 67 0,20
5877624 28191000T019 5877610 28191000T019 10,0 10 19,00 72 0,20
5877625 28191200T022 5877611 28191200T022 12,0 12 22,00 83 0,30
5877626 28191400T022 5877612 28191400T022 14,0 14 22,00 83 0,30
5877627 28191500T026 5877613 28191500T026 15,0 15 26,00 92 0,30
5877628 28191600T026 5877614 28191600T026 16,0 16 26,00 92 0,30
5877629 28191800T026 5877615 28191800T026 18,0 18 26,00 92 0,30
5877630 28192000T032 5877616 28192000T032 20,0 20 32,00 104 0,30
NOTE: For application data, please see page P23.
General Purpose Solid Carbide End Mills
• Centre cutting.
• Chamfered corners.
• Standard items listed. Additional styles
and coatings made-to-order.
rst choice
alternate choice
Detail X
WID_Master16_SolidEndMilling_GeneralPurpose_P016_P017_Metric_REBRAND.indd 16 10/30/15 2:29 PM
P17
LViWID M 16 S lidE dMilli G lP P016 P017 M i REBRANDO b 2020154 19PM
widia.com
TiAlN
General Purpose Solid Carbide End Mills • Roughing/Finishing
Series 4002 4012 • VariMill™ GP
Series 4002 4012 • VariMill GP
grade TiAlN
TiAlN
order # catalogue # D1 D
length of cut
Ap1 max
length
L BCH
5873484 40020100T004 1,0 3 4,00 38 —
5873485 40020150T004 1,5 3 4,00 38 —
5873486 40020180T004 1,8 3 4,00 38 —
5873487 40020200T006 2,0 3 6,30 38 —
5873488 40020250T006 2,5 3 6,30 38 —
5873489 40020300T009 3,0 3 9,50 38 —
5873490 40020300T019 3,0 3 19,00 63 —
5873491 40120300T025 3,0 3 25,00 75 —
5873492 40020350T012 3,5 4 12,00 50 —
5873493 40020400T012 4,0 4 12,00 50 0,10
5873494 40020400T019 4,0 4 19,00 63 0,10
5873495 40120400T031 4,0 4 31,00 75 0,10
5873496 40020450T014 4,5 6 14,00 50 0,10
5873497 40020480T014 4,8 6 14,00 50 0,10
5873498 40020500T014 5,0 5 14,00 50 0,10
5873499 40020500T020 5,0 5 20,00 63 0,10
5873500 40120500T031 5,0 5 31,00 100 0,10
5873501 40020550T014 5,5 6 14,00 50 0,10
5873502 40020600T016 6,0 6 16,00 50 0,10
5873503 40020600T028 6,0 6 28,00 76 0,10
• Centre cutting.
• Chamfered corners.
• Standard items listed. Additional styles
and coatings made-to-order.
rst choice
alternate choice
End Mill Tolerances
D1 tolerance e8 D
tolerance h6
+ / -
) 3 -0,014/-0,028 ) 3 0/0,006
> 3–6 -0,020/-0,038 > 3–6 0/0,008
> 6–10 -0,025/-0,047 > 6–10 0/0,009
> 10–18 -0,032/-0,059 > 10–18 0/0,011
> 18–30 -0,040/-0,073 > 18–30 0/0,013
General Purpose Solid Carbide End Mills
(continued)
Detail X
WID_Master16_SolidEndMilling_GeneralPurpose_P016_P017_Metric_REBRAND.indd 17 10/30/15 2:29 PM
P18
LViWID M 16 S lidE dMilli G lP P018 P019 M i REBRANDO b 20 20154 19PM
widia.com
TiAlN
General Purpose Solid Carbide End Mills • Roughing/Finishing
Series 4002 4012 • VariMill™ GP
rst choice
alternate choice
General Purpose Solid Carbide End Mills
grade TiAlN
TiAlN
order # catalogue # D1 D
length of cut
Ap1 max
length
L BCH
5873504 40120600T038 6,0 6 38,00 100 0,10
5873505 40020700T020 7,0 7 20,00 63 0,10
5873506 40020800T020 8,0 8 20,00 63 0,20
5873507 40020800T028 8,0 8 28,00 76 0,20
5873508 40120800T041 8,0 8 41,00 100 0,20
5873509 40020900T020 9,0 9 20,00 63 0,20
5873510 40021000T022 10,0 10 22,00 72 0,20
5873511 40021000T032 10,0 10 32,00 89 0,20
5873512 40121000T045 10,0 10 45,00 100 0,20
5873513 40021100T025 11,0 11 25,00 76 0,30
5873514 40021200T025 12,0 12 25,00 76 0,30
5873515 40021200T045 12,0 12 45,00 100 0,30
5873516 40121200T075 12,0 12 75,00 150 0,30
5873517 40021400T032 14,0 14 32,00 83 0,30
5873518 40021400T050 14,0 14 50,00 100 0,30
5873519 40121400T075 14,0 14 75,00 150 0,30
5873520 40021600T032 16,0 16 32,00 89 0,30
5873531 40021600T056 16,0 16 56,00 110 0,30
5873532 40121600T075 16,0 16 75,00 150 0,30
5873533 40021800T038 18,0 18 38,00 100 0,30
5873534 40021800T060 18,0 18 60,00 125 0,30
5873535 40121800T075 18,0 18 75,00 150 0,30
5873536 40022000T038 20,0 20 38,00 104 0,30
5873537 40022000T056 20,0 20 56,00 125 0,30
5873538 40122000T075 20,0 20 75,00 150 0,30
NOTE: For application data, please see pages P23-P24.
(Series 4002 4012 • VariMill GP — continued)
Detail X
WID_Master16_SolidEndMilling_GeneralPurpose_P018_P019_Metric_REBRAND.indd 18 10/30/15 2:29 PM
P19
LViWID M 16 S lidE dMilli G lP P018 P019 M i REBRANDO b 2020154 19PM
widia.com
TiAlN
General Purpose Solid Carbide End Mills • Roughing/Finishing
Series D001 D011 • VariMill™ GP
Series D001 D011 • VariMill GP
grade TiAlN
TiAlN
order # catalogue # D1 D
length of cut
Ap1 max
length
L
5880362 D0110200T006 2,0 6 6,00 57
5880363 D0010300T004 3,0 6 4,00 50
5880364 D0110300T007 3,0 6 7,00 57
5880365 D0010400T005 4,0 6 5,00 54
5880366 D0110400T008 4,0 6 8,00 57
5880367 D0110500T010 5,0 6 10,00 57
5880368 D0110600T010 6,0 6 10,00 57
5880369 D0110700T013 7,0 8 13,00 63
5880370 D0110800T016 8,0 8 16,00 63
5880381 D0111000T019 10,0 10 19,00 72
5880382 D0111200T022 12,0 12 22,00 83
5880383 D0111400T022 14,0 14 22,00 83
5880384 D0111600T026 16,0 16 26,00 92
5880385 D0012000T020 20,0 20 20,00 92
5880386 D0112000T032 20,0 20 32,00 104
NOTE: For application data, please see pages P25.
• Centre cutting.
• Standard items listed. Additional styles
and coatings made-to-order.
rst choice
alternate choice
End Mill Tolerances
D1 tolerance e8 D
tolerance h6
+ / -
) 3 -0,014/-0,028 ) 3 0/0,006
> 3–6 -0,020/-0,038 > 3–6 0/0,008
> 6–10 -0,025/-0,047 > 6–10 0/0,009
> 10–18 -0,032/-0,059 > 10–18 0/0,011
> 18–30 -0,040/-0,073 > 18–30 0/0,013
General Purpose Solid Carbide End Mills
WID_Master16_SolidEndMilling_GeneralPurpose_P018_P019_Metric_REBRAND.indd 19 10/30/15 2:29 PM
P20
LViWID M 16 S lidE dMilli G lP P020 P021 M i REBRANDO b 20 20154 19PM
widia.com
UNCOATED - .. TiAlN
General Purpose Solid Carbide End Mills • Roughing/Finishing
Series 2838 • VariMill™ GP
End Mill Tolerances
D1 tolerance e8 D
tolerance h6
+ / -
) 3 -0,014/-0,028 ) 3 0/0,006
> 3–6 -0,020/-0,038 > 3–6 0/0,008
> 6–10 -0,025/-0,047 > 6–10 0/0,009
> 10–18 -0,032/-0,059 > 10–18 0/0,011
> 18–30 -0,040/-0,073 > 18–30 0/0,013
Series 2838 • VariMill GP
grade UNCOATED
order # catalogue #
grade TiAlN
TiAlN
order # catalogue # D1 D
length of cut
Ap1 max
length
L
— 5880451 28380200T007 2,0 2 7,00 50
5880462 28380300T007 5880452 28380300T007 3,0 3 7,00 50
5880463 28380400T008 5880453 28380400T008 4,0 4 8,00 50
5880464 28380500T010 5880454 28380500T010 5,0 5 10,00 50
5880465 28380600T010 5880455 28380600T010 6,0 6 10,00 57
5880466 28380800T016 5880456 28380800T016 8,0 8 16,00 63
5880467 28381000T019 5880457 28381000T019 10,0 10 19,00 72
5880468 28381200T022 5880458 28381200T022 12,0 12 22,00 83
5880469 28381400T022 5880459 28381400T022 14,0 14 22,00 83
5880470 28381600T026 5880460 28381600T026 16,0 16 26,00 92
5880471 28382000T032 5880461 28382000T032 20,0 20 32,00 104
NOTE: For application data, please see page P25.
General Purpose Solid Carbide End Mills
• Centre cutting.
• Standard items listed. Additional styles
and coatings made-to-order.
rst choice
alternate choice
WID_Master16_SolidEndMilling_GeneralPurpose_P020_P021_Metric_REBRAND.indd 20 10/30/15 2:29 PM
P21
LViWID M 16 S lidE dMilli G lP P020 P021 M i REBRANDO b 2020154 19PM
widia.com
UNCOATED - .. TiAlN
General Purpose Solid Carbide End Mills • Roughing/Finishing
Series 4001 4011 4021 • VariMill™ GP
Series 4001 4011 4021 • VariMill GP
grade UNCOATED
order # catalogue #
grade TiAlN
TiAlN
order # catalogue # D1 D
length of cut
Ap1 max
length
L
5880425 40010100T004 5880387 40010100T004 1,0 3 4,00 38
5880426 40010150T005 5880388 40010150T005 1,5 3 5,00 38
5880427 40010200T006 5880389 40010200T006 2,0 3 6,30 38
5880428 40010250T007 5880390 40010250T007 2,5 3 7,00 38
5880429 40010300T009 5880391 40010300T009 3,0 3 9,50 38
— 5880392 40010350T012 3,5 4 12,00 50
5880430 40010400T012 5880393 40010400T012 4,0 4 12,00 50
5880431 40110400T019 5880395 40110400T019 4,0 4 19,00 63
5880432 40210400T031 5880396 40210400T031 4,0 4 31,00 75
5880433 40010500T014 — 5,0 5 14,00 50
— 5880397 40210500T014 5,0 6 14,00 50
5880435 40010600T020 5880398 40010600T020 6,0 6 20,00 63
5880436 40110600T028 5880399 40110600T028 6,0 6 28,00 76
5880437 40210600T038 5880400 40210600T038 6,0 6 38,00 100
5880438 40010800T020 5880401 40010800T020 8,0 8 20,00 63
5880439 40110800T028 5880402 40110800T028 8,0 8 28,00 76
5880440 40210800T040 5880403 40210800T040 8,0 8 40,00 100
5880441 40011000T022 5880404 40011000T022 10,0 10 22,00 76
5880442 40111000T032 5880405 40111000T032 10,0 10 32,00 89
5880443 40211000T045 5880406 40211000T045 10,0 10 45,00 100
• Centre cutting.
• Standard items listed. Additional styles
and coatings made-to-order.
rst choice
alternate choice
End Mill Tolerances
D1 tolerance e8 D
tolerance h6
+ / -
) 3 -0,014/-0,028 ) 3 0/0,006
> 3–6 -0,020/-0,038 > 3–6 0/0,008
> 6–10 -0,025/-0,047 > 6–10 0/0,009
> 10–18 -0,032/-0,059 > 10–18 0/0,011
> 18–30 -0,040/-0,073 > 18–30 0/0,013
General Purpose Solid Carbide End Mills
(continued)
WID_Master16_SolidEndMilling_GeneralPurpose_P020_P021_Metric_REBRAND.indd 21 10/30/15 2:29 PM
P22
LViWID M 16 S lidE dMilli G lP P022 P023 M i REBRANDO b 20 20154 19PM
widia.com
UNCOATED - .. TiAlN
General Purpose Solid Carbide End Mills • Roughing/Finishing
Series 4001 4011 4021 • VariMill™ GP
rst choice
alternate choice
General Purpose Solid Carbide End Mills
grade UNCOATED
order # catalogue #
grade TiAlN
TiAlN
order # catalogue # D1 D
length of cut
Ap1 max
length
L
5880444 40011200T025 5880407 40011200T025 12,0 12 25,00 75
5880445 40111200T045 5880408 40111200T045 12,0 12 45,00 100
5880446 40211200T075 5880409 40211200T075 12,0 12 75,00 150
5880447 40011400T032 5880410 40011400T032 14,0 14 32,00 89
5880448 40011600T032 5880411 40011600T032 16,0 16 32,00 89
5880449 40012000T038 5880412 40012000T038 20,0 20 38,00 100
5880450 40112000T075 5880413 40112000T075 20,0 20 75,00 150
NOTE: For application data, please see pages P25-P26.
(Series 4001 4011 4021 • VariMill GP — continued)
WID_Master16_SolidEndMilling_GeneralPurpose_P022_P023_Metric_REBRAND.indd 22 10/30/15 2:29 PM
P23
LViWID M 16 S lidE dMilli G lP P022 P023 M i REBRANDO b 2020154 19PM
widia.com
General Purpose Solid Carbide End Mills • Roughing/Finishing
Application Data • Series D002 D012 2819 4002 • VariMill™ GP
General Purpose Solid Carbide End Mills
Series D002 D012 2819 4002 • TiAlN •VariMill GP
Material
Group
Side Milling (A)
and Slotting (B) TiAlN Recommended feed per tooth (fz = mm/th) for side milling (A).
For slotting (B), reduce fz by 20%.
AB
Cutting Speed
— vc
m/min
D1 — Diameter
ap ae ap min max mm 1,0 2,0 3,0 4,0 5,0 6,0 8,0 10,0 12,0 14,0 16,0 18,0 20,0
P
0
Ap1 max 0,1 x D 0,5 x D 150 – 200 fz 0,007 0,014 0,021 0,028 0,036 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114
1
Ap1 max 0,1 x D 0,5 x D 150 – 200 fz 0,007 0,014 0,021 0,028 0,036 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114
2
Ap1 max 0,1 x D 0,5 x D 140 – 190 fz 0,007 0,014 0,021 0,028 0,036 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114
3
Ap1 max 0,1 x D 0,5 x D 120 – 160 fz 0,006 0,011 0,017 0,023 0,030 0,036 0,050 0,061 0,070 0,079 0,087 0,095 0,101
4
Ap1 max 0,1 x D 0,5 x D 90 – 150 fz 0,005 0,010 0,016 0,021 0,027 0,033 0,045 0,054 0,062 0,070 0,077 0,083 0,088
M1
Ap1 max 0,1 x D 0,5 x D 90 – 115 fz 0,006 0,011 0,017 0,023 0,030 0,036 0,050 0,061 0,070 0,079 0,087 0,095 0,101
2
Ap1 max 0,1 x D 0,5 x D 60 – 80 fz 0,005 0,009 0,014 0,019 0,024 0,029 0,040 0,048 0,056 0,063 0,070 0,076 0,081
K1
Ap1 max 0,1 x D 0,5 x D 120 – 150 fz 0,007 0,014 0,021 0,028 0,036 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114
2
Ap1 max 0,1 x D 0,5 x D 110 – 140 fz 0,006 0,011 0,017 0,023 0,030 0,036 0,050 0,061 0,070 0,079 0,087 0,095 0,101
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group.
Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on >12mm diameters.
Series D002 D012 2819 4002 • Uncoated •VariMill GP
Material
Group
Side Milling (A)
and Slotting (B) uncoated Recommended feed per tooth (fz = mm/th) for side milling (A).
For slotting (B), reduce fz by 20%.
AB
Cutting Speed — vc
m/min D1 — Diameter
ap ae ap min max mm 2,0 3,0 4,0 6,0 8,0 10,0 12,0 16,0 20,0
P
0
Ap1 max 0,1 x D 0,5 x D 120 – 160 fz 0,014 0,021 0,028 0,044 0,060 0,072 0,083 0,101 0,114
1
Ap1 max 0,1 x D 0,5 x D 120 – 160 fz 0,014 0,021 0,028 0,044 0,060 0,072 0,083 0,101 0,114
2
Ap1 max 0,1 x D 0,5 x D 112 – 152 fz 0,014 0,021 0,028 0,044 0,060 0,072 0,083 0,101 0,114
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group.
Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on >12mm diameters.
WID_Master16_SolidEndMilling_GeneralPurpose_P022_P023_Metric_REBRAND.indd 23 10/30/15 2:29 PM
P24
LViWID M 16 S lidE dMilli G lP P024 P025 M i REBRANDO b 20 20154 19PM
widia.com
General Purpose Solid Carbide End Mills • Roughing/Finishing
Application Data • Series 4012 • VariMill™ GP
General Purpose Solid Carbide End Mills
Series 4012 • TiAlN • VariMill GP
Material
Group
Side Milling (A) TiAlN Recommended feed per tooth (fz = mm/th) for side milling (A).
A
Cutting Speed
— vc
m/min
D1 — Diameter
ap ae min max mm 2,0 3,0 4,0 5,0 6,0 8,0 10,0 12,0 14,0 16,0 18,0 20,0
P
0
Ap1 max 0,1 x D 150 – 200 fz 0,014 0,021 0,028 0,036 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114
1
Ap1 max 0,1 x D 150 – 200 fz 0,014 0,021 0,028 0,036 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114
2
Ap1 max 0,1 x D 140 – 190 fz 0,014 0,021 0,028 0,036 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114
3
Ap1 max 0,1 x D 120 – 160 fz 0,011 0,017 0,023 0,030 0,036 0,050 0,061 0,070 0,079 0,087 0,095 0,101
4
Ap1 max 0,1 x D 90 – 150 fz 0,010 0,016 0,021 0,027 0,033 0,045 0,054 0,062 0,070 0,077 0,083 0,088
M1
Ap1 max 0,1 x D 90 – 115 fz 0,011 0,017 0,023 0,030 0,036 0,050 0,061 0,070 0,079 0,087 0,095 0,101
2
Ap1 max 0,1 x D 60 – 80 fz 0,009 0,014 0,019 0,024 0,029 0,040 0,048 0,056 0,063 0,070 0,076 0,081
K1
Ap1 max 0,1 x D 120 – 150 fz 0,014 0,021 0,028 0,036 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114
2
Ap1 max 0,1 x D 110 – 140 fz 0,011 0,017 0,023 0,030 0,036 0,050 0,061 0,070 0,079 0,087 0,095 0,101
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group.
Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on >12mm diameters.
Series 4012 • Uncoated • VariMill GP
Material
Group
Side Milling (A) uncoated Recommended feed per tooth (fz = mm/th) for side milling (A).
ACutting Speed — vc
m/min D1 — Diameter
ap ae min max mm 3,0 4,0 6,0 8,0 10,0 12,0 16,0 20,0
P
0
Ap1 max 0,1 x D 120 – 160 fz 0,021 0,028 0,044 0,060 0,072 0,083 0,101 0,114
1
Ap1 max 0,1 x D 120 – 160 fz 0,021 0,028 0,044 0,060 0,072 0,083 0,101 0,114
2
Ap1 max 0,1 x D 112 – 152 fz 0,021 0,028 0,044 0,060 0,072 0,083 0,101 0,114
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group.
Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on >12mm diameters.
WID_Master16_SolidEndMilling_GeneralPurpose_P024_P025_Metric_REBRAND.indd 24 10/30/15 2:29 PM
P25
LViWID M 16 S lidE dMilli G lP P024 P025 M i REBRANDO b 2020154 19PM
widia.com
General Purpose Solid Carbide End Mills • Roughing/Finishing
Application Data • Series D001 D011 2838 4001 • VariMill™ GP
General Purpose Solid Carbide End Mills
Series D001 D011 2838 4001 • TiAlN • VariMill GP
Material
Group
Side Milling (A)
and Slotting (B) TiAlN Recommended feed per tooth (fz = mm/th) for side milling (A).
For slotting (B), reduce fz by 20%.
AB
Cutting
Speed — vc
m/min
D1 — Diameter
ap ae ap min max mm 1,0 2,0 3,0 4,0 5,0 6,0 8,0 10,0 12,0 14,0 16,0 18,0 20,0
P
0
Ap1 max 0,1 x D 0,5 x D 150 – 200 fz 0,007 0,014 0,021 0,028 0,036 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114
1
Ap1 max 0,1 x D 0,5 x D 150 – 200 fz 0,007 0,014 0,021 0,028 0,036 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114
2
Ap1 max 0,1 x D 0,5 x D 140 – 190 fz 0,007 0,014 0,021 0,028 0,036 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114
3
Ap1 max 0,1 x D 0,5 x D 120 – 160 fz 0,006 0,011 0,017 0,023 0,030 0,036 0,050 0,061 0,070 0,079 0,087 0,095 0,101
4
Ap1 max 0,1 x D 0,5 x D 90 – 150 fz 0,005 0,010 0,016 0,021 0,027 0,033 0,045 0,054 0,062 0,070 0,077 0,083 0,088
M1
Ap1 max 0,1 x D 0,5 x D 90 – 115 fz 0,006 0,011 0,017 0,023 0,030 0,036 0,050 0,061 0,070 0,079 0,087 0,095 0,101
2
Ap1 max 0,1 x D 0,5 x D 60 – 80 fz 0,005 0,009 0,014 0,019 0,024 0,029 0,040 0,048 0,056 0,063 0,070 0,076 0,081
K1
Ap1 max 0,1 x D 0,5 x D 120 – 150 fz 0,007 0,014 0,021 0,028 0,036 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114
2
Ap1 max 0,1 x D 0,5 x D 110 – 140 fz 0,006 0,011 0,017 0,023 0,030 0,036 0,050 0,061 0,070 0,079 0,087 0,095 0,101
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group.
Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on >12mm diameters.
Series D001 D011 2838 4001 • Uncoated • VariMill GP
Material
Group
Side Milling (A)
and Slotting (B) uncoated Recommended feed per tooth (fz = mm/th) for side milling (A).
For slotting (B), reduce fz by 20%.
AB
Cutting
Speed — vc
m/min
D1 — Diameter
ap ae ap min max mm 1,0 2,0 3,0 4,0 6,0 8,0 10,0 12,0 16,0 20,0
P
0
Ap1 max 0,1 x D 0,5 x D 120 – 160 fz 0,007 0,014 0,021 0,028 0,044 0,060 0,072 0,083 0,101 0,114
1
Ap1 max 0,1 x D 0,5 x D 120 – 160 fz 0,007 0,014 0,021 0,028 0,044 0,060 0,072 0,083 0,101 0,114
2
Ap1 max 0,1 x D 0,5 x D 112 – 152 fz 0,007 0,014 0,021 0,028 0,044 0,060 0,072 0,083 0,101 0,114
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group.
Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on >12mm diameters.
WID_Master16_SolidEndMilling_GeneralPurpose_P024_P025_Metric_REBRAND.indd 25 10/30/15 2:29 PM
P26
LViWID M 16 S lidE dMilli G lP P026 P027 M i REBRANDN b 10 20151 00PM
widia.com
LViWID M 16 S lidE dMilli G lP P026 P027 M i REBRANDN b 10 20151 00PM
General Purpose Solid Carbide End Mills • Roughing/Finishing
Application Data • Series 4011 4021 • VariMill™ GP
General Purpose Solid Carbide End Mills
Series 4011 4021 • TiAlN • VariMill GP
Material
Group
Side Milling (A) TiAlN Recommended feed per tooth (fz = mm/th) for side milling (A).
A
Cutting
Speed — vc
m/min
D1 — Diameter
ap ae min max mm 2,0 3,0 4,0 5,0 6,0 8,0 10,0 12,0 14,0 16,0 18,0 20,0
P
0
Ap1 max 0,1 x D 150 – 200 fz 0,014 0,021 0,028 0,036 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114
1
Ap1 max 0,1 x D 150 – 200 fz 0,014 0,021 0,028 0,036 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114
2
Ap1 max 0,1 x D 140 – 190 fz 0,014 0,021 0,028 0,036 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114
3
Ap1 max 0,1 x D 120 – 160 fz 0,011 0,017 0,023 0,030 0,036 0,050 0,061 0,070 0,079 0,087 0,095 0,101
4
Ap1 max 0,1 x D 90 – 150 fz 0,010 0,016 0,021 0,027 0,033 0,045 0,054 0,062 0,070 0,077 0,083 0,088
M1
Ap1 max 0,1 x D 90 – 115 fz 0,011 0,017 0,023 0,030 0,036 0,050 0,061 0,070 0,079 0,087 0,095 0,101
2
Ap1 max 0,1 x D 60 – 80 fz 0,009 0,014 0,019 0,024 0,029 0,040 0,048 0,056 0,063 0,070 0,076 0,081
K1
Ap1 max 0,1 x D 120 – 150 fz 0,014 0,021 0,028 0,036 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114
2
Ap1 max 0,1 x D 110 – 140 fz 0,011 0,017 0,023 0,030 0,036 0,050 0,061 0,070 0,079 0,087 0,095 0,101
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group.
Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on >12mm diameters.
Series 4011 4021 • Uncoated • VariMill GP
Material
Group
Side Milling (A) uncoated Recommended feed per tooth (fz = mm/th) for side milling (A).
ACutting Speed — vc
m/min D1 — Diameter
ap ae min max mm 2,0 3,0 4,0 6,0 8,0 10,0 12,0 16,0 20,0
P
0
Ap1 max 0,1 x D 120 – 160 fz 0,014 0,021 0,028 0,044 0,060 0,072 0,083 0,101 0,114
1
Ap1 max 0,1 x D 120 – 160 fz 0,014 0,021 0,028 0,044 0,060 0,072 0,083 0,101 0,114
2
Ap1 max 0,1 x D 112 – 152 fz 0,014 0,021 0,028 0,044 0,060 0,072 0,083 0,101 0,114
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group.
Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on >12mm diameters.
WID_Master16_SolidEndMilling_GeneralPurpose_P026_P027_Metric_REBRAND.indd 26 11/10/15 2:19 PM
LViWID M 16 S lidE dMilli G lP P026 P027 M i REBRANDN b 1020151 00PM
WIDIA™ proudly offers premium quality ERICKSON toolholder products,
so you can be sure that you’re buying the best the industry has to
offer. The entire portfolio — including steep taper, HSK, straight shank
extensions, collets, sleeves, and accompanying products — offers high
productivity, increased accuracy, and application fl exibility.
To learn more about our innovations, contact your local
Authorised Distributor or visit www.widia.com.
ERICKSON™ Toolholders
Designed for both manual and automatic tool changing, ERICKSON interfaces are
ideally suited for most machine tools and feature a compact and rigid construction
guaranteed to handle high torque and deliver optimal metal removal rates.
Tooling
Systems
WID_Master16_SolidEndMilling_GeneralPurpose_P026_P027_Metric_REBRAND.indd 27 11/10/15 2:19 PM
LViWID M 16 S lidE dMilli G lP P028 P029 M i REBRANDN b 13 20154 10PM
P28 widia.com
WIDIA™ offers a complete line of 3-fl ute
general-purpose solid carbide end mill tools
General purpose offers plunging, slotting, and profi ling for a wide range of
materials and applications. Designed to provide high Metal Removal Rates
(MRR) and excellent surface conditions at economic pricing. For a complete
line of comprehensive tools, visit widia.com.
Solid Carbide End Mills
Being as productive and profi table as possible is your fundamental goal. With the addition of NOVO™ to your team,
your goal can be achieved. NOVO possesses powerful digital tools that link together process planning, inventory
availability and purchase, cost-per-part management, and productivity improvements.
NOVO can ensure you have the right tools on your machines, in the right sequence. This results in fl awless execution
that accelerates every job, and maximises every shift.
01
NOVO KNOWS ART TO PART TO PROFIT
widia.com/novo
THE DIGITAL SOURCE FOR DELIVERING SMART MACHINING SOLUTIONS
WID_Master16_SolidEndMilling_GeneralPurpose_P028_P029_Metric_REBRAND.indd 28 11/13/15 4:23 PM
As an industry-leading manufacturer of carbide round tools, WIDIA-Hanita™
offers a complete portfolio of precision-engineered products with solutions for
a wide range of workpiece materials at widia.com.
The VariMill™ line offers superior performance high-speed machining.
• The versatile 2- and 4-fl ute general-purpose line, VariMill™ GP,
is ideal for a wide range of materials.
• The 4-fl ute VariMill I™ offers plunging, slotting, and profi ling
at the highest possible feed rates for a wide range of materials.
• The 5-fl ute VariMill II™ end mills are the proven leader in the fi eld
of high-performance, chatter-free machining.
• The 5-fl ute VariMill II™ ER end mills are specifi cally designed
for machining high-performance aerospace materials.
• The 7-fl ute VariMill III™ ER high-performance tool has true
fi nishing capabilities for walls and fl oors.
WIDIA-Hanita™ solid carbide end mill products
have a strong history of providing revolutionary
and innovative solutions for your most extreme
solid end milling challenges.
WIDIA-Hanita™
Means Quality
WID_Master16_SolidEndMilling_GeneralPurpose_P028_P029_Metric_REBRAND.indd 29 11/13/15 4:23 PM
P30
LViWID M 16 S lidE dMilli G lP P030 P031 M i REBRANDN b 12 20159 39AM
widia.com
VariMill GP • 4-Flute
• General purpose tools for a wide range of workpiece materials.
• Roughing and fi nishing with one tool.
• Various lengths-of-cut and overall lengths with different front-end
designs available.
• Four fl utes for high Metal Removal Rates (MRR) and tool life.
VariMill GP offers plunging, slotting, and profi ling for a wide range of
materials and applications. Designed to provide high metal removal
rates and excellent surface conditions at a value price. A wide range of
diameters, lengths, and corner styles (such as chamfered, sharp edge,
and ball nose) are available from stock.
Eccentric Relief
Edge strength
and stability.
30° Helix Angle
For roughing
and fi nishing.
High Quality Substrate
Improved tool life and MRR.
Centre Cutting
For plunging and ramping.
TiAlN PVD Coating
High Metal Removal Rates (MRR)
and tool life.
VariMill GP
General Purpose 4-Flute End Mills •
VariMill™ GP
WID_Master16_SolidEndMilling_GeneralPurpose_P030_P031_Metric_REBRAND.indd 30 11/12/15 9:57 AM
P31
LViWID M 16 S lidE dMilli G lP P030 P031 M i REBRANDN b 1220159 39AM
widia.com
VariMill™ GP
• Increased manufacturing fl exibility and reduced tooling cost.
• Less tool changes and high Metal Removal Rates (MRR).
• One tool required for roughing and fi nishing.
• Eccentric relief for improved edge stability and high tool life.
• Easy and cost-effi cient regrinding due to eccentric relief.
D004/D014 Series 2528 Series
• Centre cutting.
• DIN 6527 standard
dimensions — short
and long.
• Steel, stainless steel,
and cast iron.
• Corner chamfer for
increased tool life.
• Centre cutting.
• DIN 6528 standard
dimensions.
• Steel, stainless steel,
and cast iron.
• Corner chamfer for
increased tool life.
4004/4014/4024 Series D010 Series
• Centre cutting.
• Wide range of
lengths-of-cut — regular,
long, and extra long.
• Steel, stainless steel,
and cast iron.
• Corner chamfer for
increased tool life.
• DIN 6527 standard
dimensions — short
and long.
• Steel, stainless steel,
and cast iron.
• Centre cut ball nose.
2848 Series 4000/4010 Series
• DIN 6528 standard
dimensions.
• Steel, stainless steel,
and cast iron.
• Centre cut ball nose.
• Wide range of
lengths-of-cut — regular
and long.
• Steel, stainless steel,
and cast iron.
• Centre cut ball nose.
WID_Master16_SolidEndMilling_GeneralPurpose_P030_P031_Metric_REBRAND.indd 31 11/12/15 9:57 AM
P32
LViWID M 16 S lidE dMilli G lP P032 P033 M i REBRANDO b 20 20154 21PM
widia.com
TiAlN UNCOATED - .. TiAlN
General Purpose Solid Carbide End Mills • Roughing/Finishing
Series D004 D014 • VariMill™ GP
Series D004 D014 • VariMill GP
grade TiAlN
TiAlN
order # catalogue #
grade UNCOATED
order # catalogue #
grade TiAlN
TiAlN
order # catalogue # D1 D
length of cut
Ap1 max
length
L BCH
5825894 D0040200T004 — — 2,0 6 4,00 50 —
5825895 D0140200T007 — — 2,0 6 7,00 57 —
5825896 D0140250T008 — — 2,5 6 8,00 57 —
5825897 D0040300T005 — — 3,0 6 5,00 50 —
5825898 D0140300T008 — — 3,0 6 8,00 57 —
5825899 D0140350T010 — — 3,5 6 10,00 57 —
5825900 D0040400T008 — — 4,0 6 8,00 54 0,10
5825931 D0140400T011 — — 4,0 6 11,00 57 0,10
5825932 D0140450T011 — — 4,5 6 11,00 57 0,10
5825933 D0040500T009 — — 5,0 6 9,00 54 0,10
5825934 D0140500T013 — — 5,0 6 13,00 57 0,10
5825935 D0140550T013 — — 5,5 6 13,00 57 0,10
5825936 D0040600T010 — — 6,0 6 10,00 54 0,10
5825937 D0140600T013 — — 6,0 6 13,00 57 0,10
5825938 D0140650T016 — — 6,5 8 16,00 63 0,10
5825939 D0040700T011 — — 7,0 8 11,00 58 0,10
5825940 D0140700T016 — — 7,0 8 16,00 63 0,10
5825941 D0140750T019 — — 7,5 8 19,00 63 0,10
5825942 D0040800T012 — — 8,0 8 12,00 58 0,20
5825943 D0140800T019 — — 8,0 8 19,00 63 0,20
• Centre cutting.
• Chamfered corners.
• Standard items listed. Additional styles
and coatings made-to-order.
rst choice
alternate choice
End Mill Tolerances
D1 tolerance e8 D
tolerance h6
+ / -
) 3 -0,014/-0,028 ) 3 0/0,006
> 3–6 -0,020/-0,038 > 3–6 0/0,008
> 6–10 -0,025/-0,047 > 6–10 0/0,009
> 10–18 -0,032/-0,059 > 10–18 0/0,011
> 18–30 -0,040/-0,073 > 18–30 0/0,013
General Purpose Solid Carbide End Mills
(continued)
Detail X
WID_Master16_SolidEndMilling_GeneralPurpose_P032_P033_Metric_REBRAND.indd 32 10/30/15 2:30 PM
P33
LViWID M 16 S lidE dMilli G lP P032 P033 M i REBRANDO b 2020154 21PM
widia.com
TiAlN UNCOATED - .. TiAlN
General Purpose Solid Carbide End Mills • Roughing/Finishing
Series D004 D014 • VariMill™ GP
grade TiAlN
TiAlN
order # catalogue #
grade UNCOATED
order # catalogue #
grade TiAlN
TiAlN
order # catalogue # D1 D
length of cut
Ap1 max
length
L BCH
5825944 D0040900T013 — — 9,0 10 13,00 66 0,20
5825945 D0140900T019 — — 9,0 10 19,00 72 0,20
5825946 D0041000T014 — — 10,0 10 14,00 66 0,20
5825947 D0141000T022 — — 10,0 10 22,00 72 0,20
5825948 D0041200T016 5825968 D0041200W016 5825958 D0041200W016 12,0 12 16,00 73 0,30
5825949 D0141200T026 5825969 D0141200W026 5825959 D0141200W026 12,0 12 26,00 83 0,30
5825950 D0041400T018 5825970 D0041400W018 5825960 D0041400W018 14,0 14 18,00 75 0,30
5825951 D0141400T026 5825971 D0141400W026 5825961 D0141400W026 14,0 14 26,00 83 0,30
5825952 D0041600T022 5825972 D0041600W022 5825962 D0041600W022 16,0 16 22,00 82 0,30
5825953 D0141600T032 5825973 D0141600W032 5825963 D0141600W032 16,0 16 32,00 92 0,30
5825954 D0041800T024 5825974 D0041800W024 5825964 D0041800W024 18,0 18 24,00 84 0,30
5825955 D0141800T032 5825975 D0141800W032 5825965 D0141800W032 18,0 18 32,00 92 0,30
5825956 D0042000T026 5825976 D0042000W026 5825966 D0042000W026 20,0 20 26,00 92 0,30
5825957 D0142000T038 5825977 D0142000W038 5825967 D0142000W038 20,0 20 38,00 104 0,30
NOTE: For application data, please see pages P40–P41.
rst choice
alternate choice
General Purpose Solid Carbide End Mills
(Series D004 D014 • VariMill GP — continued)
Detail X
WID_Master16_SolidEndMilling_GeneralPurpose_P032_P033_Metric_REBRAND.indd 33 10/30/15 2:30 PM
P34
LViWID M 16 S lidE dMilli G lP P034 P035 M i REBRANDO b 20 20154 21PM
widia.com
UNCOATED - .. TiAlN
General Purpose Solid Carbide End Mills • Roughing/Finishing
Series 2528 • VariMill™ GP
End Mill Tolerances
D1 tolerance e8 D
tolerance h6
+ / -
) 3 -0,014/-0,028 ) 3 0/0,006
> 3–6 -0,020/-0,038 > 3–6 0/0,008
> 6–10 -0,025/-0,047 > 6–10 0/0,009
> 10–18 -0,032/-0,059 > 10–18 0/0,011
> 18–30 -0,040/-0,073 > 18–30 0/0,013
Series 2528 • VariMill GP
grade UNCOATED
order # catalogue #
grade TiAlN
TiAlN
order # catalogue # D1 D
length of cut
Ap1 max
length
L BCH
5825993 25280400T011 5825978 25280400T011 4,0 4 11,00 50 0,10
5825994 25280500T013 5825979 25280500T013 5,0 5 13,00 50 0,10
5825995 25280600T013 5825980 25280600T013 6,0 6 13,00 57 0,10
5825996 25280800T019 5825981 25280800T019 8,0 8 19,00 63 0,20
5825997 25281000T022 5825982 25281000T022 10,0 10 22,00 72 0,20
5825988 25281200T026 5825983 25281200T026 12,0 12 26,00 83 0,30
5825989 25281400T026 5825984 25281400T026 14,0 14 26,00 83 0,30
5825990 25281600T032 5825985 25281600T032 16,0 16 32,00 92 0,30
5825991 25281800T032 5825986 25281800T032 18,0 18 32,00 92 0,30
5825992 25282000T038 5825987 25282000T038 20,0 20 38,00 104 0,30
NOTE: For application data, please see page P41.
General Purpose Solid Carbide End Mills
• Centre cutting.
• Chamfered corners.
• Standard items listed. Additional styles
and coatings made-to-order.
rst choice
alternate choice
Detail X
WID_Master16_SolidEndMilling_GeneralPurpose_P034_P035_Metric_REBRAND.indd 34 10/30/15 2:30 PM
P35
LViWID M 16 S lidE dMilli G lP P034 P035 M i REBRANDO b 2020154 21PM
widia.com
UNCOATED - .. TiAlN UNCOATED - .. TiAlN
General Purpose Solid Carbide End Mills • Roughing/Finishing
Series 4004 4014 4024 • VariMill™ GP
Series 4004 4014 4024 • VariMill GP
grade UNCOATED
order # catalogue #
grade TiAlN
TiAlN
order # catalogue #
grade UNCOATED
order # catalogue #
grade TiAlN
TiAlN
order # catalogue # D1 D
length of cut
Ap1 max
length
L BCH
5826085 40040100T004 5826016 40040100T004 — — 1,0 3 4,00 38 —
5826086 40040150T004 5826017 40040150T004 — — 1,5 3 4,00 38 —
5826087 40040200T006 5826018 40040200T006 — — 2,0 3 6,30 38 —
5826088 40040250T006 5826019 40040250T006 — — 2,5 3 6,30 38 —
5826089 40040300T009 5826020 40040300T009 — — 3,0 3 9,50 38 —
5826090 40140300T019 5826021 40140300T019 — — 3,0 3 19,00 63 —
5826101 40240300T025 5826022 40240300T025 — — 3,0 3 25,00 75 —
5826102 40040350T012 5826023 40040350T012 — — 3,5 4 12,00 50 —
5826103 40040400T011 5826024 40040400T011 — — 4,0 4 11,00 50 0,10
— 5826025 40140400T019 — — 4,0 4 19,00 63 0,10
— 5826026 40240400T031 — — 4,0 4 31,00 75 0,10
5826104 40040450T014 5826027 40040450T014 — — 4,5 5 14,00 50 0,10
— 5826028 40040500T013 — — 5,0 5 13,00 50 0,10
5826105 40040500T020 5826029 40040500T020 — — 5,0 5 20,00 63 0,10
— 5826030 40140500T030 — — 5,0 5 30,00 75 0,10
— 5826031 40240500T031 — — 5,0 5 31,00 100 0,10
5826106 40040600T016 5826032 40040600T016 — — 6,0 6 16,00 50 0,10
5826107 40140600T028 5826033 40140600T028 — — 6,0 6 28,00 75 0,10
5826108 40240600T038 5826034 40240600T038 — — 6,0 6 38,00 100 0,10
— 5826035 40040700T020 — — 7,0 8 20,00 63 0,10
• Centre cutting.
• Chamfered corners.
• Standard items listed. Additional styles
and coatings made-to-order.
rst choice
alternate choice
End Mill Tolerances
D1 tolerance e8 D
tolerance h6
+ / -
) 3 -0,014/-0,028 ) 3 0/0,006
> 3–6 -0,020/-0,038 > 3–6 0/0,008
> 6–10 -0,025/-0,047 > 6–10 0/0,009
> 10–18 -0,032/-0,059 > 10–18 0/0,011
> 18–30 -0,040/-0,073 > 18–30 0/0,013
General Purpose Solid Carbide End Mills
(continued)
Detail X
WID_Master16_SolidEndMilling_GeneralPurpose_P034_P035_Metric_REBRAND.indd 35 10/30/15 2:30 PM
P36
LViWID M 16 S lidE dMilli G lP P036 P037 M i REBRANDO b 20 20154 21PM
widia.com
UNCOATED - .. TiAlN UNCOATED - .. TiAlN
General Purpose Solid Carbide End Mills • Roughing/Finishing
Series 4004 4014 4024 • VariMill™ GP
rst choice
alternate choice
grade UNCOATED
order # catalogue #
grade TiAlN
TiAlN
order # catalogue #
grade UNCOATED
order # catalogue #
grade TiAlN
TiAlN
order # catalogue # D1 D
length of cut
Ap1 max
length
L BCH
5826109 40040800T020 5826036 40040800T020 — — 8,0 8 20,00 50 0,20
5826110 40140800T028 5826037 40140800T028 — — 8,0 8 28,00 75 0,20
5826111 40240800T041 5826038 40240800T041 — — 8,0 8 41,00 100 0,20
— 5826039 40040900T020 — — 9,0 9 20,00 63 0,20
5826113 40041000T022 5826040 40041000T022 — — 10,0 10 22,00 72 0,20
5826114 40141000T032 5826041 40141000T032 — — 10,0 10 32,00 89 0,20
5826115 40241000T045 5826042 40241000T045 — — 10,0 10 45,00 100 0,20
5826116 40041200T025 — 5826141 40041200W025 5826070 40041200W025 12,0 12 25,00 75 0,30
— 5826043 40041200T025 — — 12,0 12 25,00 89 0,30
5826117 40141200T045 5826044 40141200T045 5826142 40141200W045 5826071 40141200W045 12,0 12 45,00 100 0,30
5826118 40241200T075 5826045 40241200T075 5826143 40241200W075 5826072 40241200W075 12,0 12 75,00 150 0,30
5826119 40041400T032 5826046 40041400T032 5826144 40041400W032 5826073 40041400W032 14,0 14 32,00 83 0,30
5826120 40141400T050 5826047 40141400T050 5826146 40141400W050 5826074 40141400W050 14,0 14 50,00 100 0,30
5826121 40241400T075 5826049 40241400T075 5826147 40241400W075 5826075 40241400W075 14,0 14 75,00 150 0,30
5826122 40041600T032 5826061 40041600T032 5826148 40041600W032 5826076 40041600W032 16,0 16 32,00 92 0,30
5826123 40141600T056 5826062 40141600T056 5826149 40141600W056 5826077 40141600W056 16,0 16 56,00 110 0,30
5826124 40241600T075 5826063 40241600T075 5826150 40241600W075 5826078 40241600W075 16,0 16 75,00 150 0,30
5826125 40041800T038 5826064 40041800T038 5826151 40041800W038 5826079 40041800W038 18,0 18 38,00 100 0,30
5826126 40141800T060 5826065 40141800T060 5826152 40141800W060 5826080 40141800W060 18,0 18 60,00 125 0,30
5826127 40241800T075 5826066 40241800T075 5826153 40241800W075 5826081 40241800W075 18,0 18 75,00 150 0,30
5826128 40042000T038 5826067 40042000T038 5826154 40042000W038 5826082 40042000W038 20,0 20 38,00 104 0,30
5826129 40142000T056 5826068 40142000T056 5826155 40142000W056 5826083 40142000W056 20,0 20 56,00 125 0,30
5826130 40242000T075 5826069 40242000T075 5826156 40242000W075 5826084 40242000W075 20,0 20 75,00 150 0,30
NOTE: For application data, please see pages P40–P41.
General Purpose Solid Carbide End Mills
(Series 4004 4014 4024 • VariMill GP — continued)
Detail X
WID_Master16_SolidEndMilling_GeneralPurpose_P036_P037_Metric_REBRAND.indd 36 10/30/15 2:30 PM
P37
LViWID M 16 S lidE dMilli G lP P036 P037 M i REBRANDO b 2020154 21PM
widia.com
UNCOATED - .. TiAlN UNCOATED - .. TiAlN
General Purpose Solid Carbide End Mills • Roughing/Finishing
Series D010 • VariMill™ GP
Series D010 • VariMill GP
grade UNCOATED
order # catalogue #
grade TiAlN
TiAlN
order # catalogue #
grade UNCOATED
order # catalogue #
grade TiAlN
TiAlN
order # catalogue # D1 D
length of cut
Ap1 max
length
L
5825604 D0100300T008 5825527 D0100300T008 — — 3,0 6 8,00 57
5825605 D0100400T011 5825528 D0100400T011 — — 4,0 6 11,00 57
5825606 D0100500T013 5825529 D0100500T013 — — 5,0 6 13,00 57
5825607 D0100600T013 5825530 D0100600T013 — — 6,0 6 13,00 57
5825608 D0100800T019 5825531 D0100800T019 — — 8,0 8 19,00 63
5825609 D0101000T022 5825532 D0101000T022 — — 10,0 10 22,00 72
5825610 D0101200T026 5825533 D0101200T026 5825589 D0101200W026 5825540 D0101200W026 12,0 12 26,00 83
5825611 D0101400T026 5825534 D0101400T026 5825590 D0101400W026 5825541 D0101400W026 14,0 14 26,00 83
5825612 D0101600T032 5825536 D0101600T032 5825591 D0101600W032 5825542 D0101600W032 16,0 16 32,00 92
5825613 D0101800T032 5825538 D0101800T032 5825592 D0101800W032 5825543 D0101800W032 18,0 18 32,00 92
5825614 D0102000T038 5825539 D0102000T038 5825593 D0102000W038 5825544 D0102000W038 20,0 20 38,00 104
NOTE: For application data, please see page P42.
• Centre cutting.
• Standard items listed. Additional styles
and coatings made-to-order.
rst choice
alternate choice
End Mill Tolerances
D1 tolerance e8 D
tolerance h6
+ / -
) 3 -0,014/-0,028 ) 3 0/0,006
> 3–6 -0,020/-0,038 > 3–6 0/0,008
> 6–10 -0,025/-0,047 > 6–10 0/0,009
> 10–18 -0,032/-0,059 > 10–18 0/0,011
> 18–30 -0,040/-0,073 > 18–30 0/0,013
General Purpose Solid Carbide End Mills
WID_Master16_SolidEndMilling_GeneralPurpose_P036_P037_Metric_REBRAND.indd 37 10/30/15 2:30 PM
P38
LViWID M 16 S lidE dMilli G lP P038 P039 M i REBRANDO b 20 20154 21PM
widia.com
UNCOATED - .. TiAlN
General Purpose Solid Carbide End Mills • Roughing/Finishing
Series 2848 • VariMill™ GP
End Mill Tolerances
D1 tolerance e8 D
tolerance h6
+ / -
) 3 -0,014/-0,028 ) 3 0/0,006
> 3–6 -0,020/-0,038 > 3–6 0/0,008
> 6–10 -0,025/-0,047 > 6–10 0/0,009
> 10–18 -0,032/-0,059 > 10–18 0/0,011
> 18–30 -0,040/-0,073 > 18–30 0/0,013
Series 2848 • VariMill GP
grade UNCOATED
order # catalogue #
grade TiAlN
TiAlN
order # catalogue # D1 D
length of cut
Ap1 max
length
L
5825594 28480400T011 5825545 28480400T011 4,0 4 11,00 50
5825595 28480500T013 5825546 28480500T013 5,0 5 13,00 50
5825596 28480600T013 5825547 28480600T013 6,0 6 13,00 57
5825597 28480800T019 5825548 28480800T019 8,0 8 19,00 63
5825598 28481000T022 5825549 28481000T022 10,0 10 22,00 72
5825599 28481200T026 5825550 28481200T026 12,0 12 26,00 83
5825600 28481400T026 5825551 28481400T026 14,0 14 26,00 83
5825601 28481600T032 5825552 28481600T032 16,0 16 32,00 92
5825602 28481800T032 5825553 28481800T032 18,0 18 32,00 92
5825603 28482000T038 5825554 28482000T038 20,0 20 38,00 104
NOTE: For application data, please see page P42.
General Purpose Solid Carbide End Mills
• Centre cutting.
• Standard items listed. Additional styles
and coatings made-to-order.
rst choice
alternate choice
WID_Master16_SolidEndMilling_GeneralPurpose_P038_P039_Metric_REBRAND.indd 38 10/30/15 2:30 PM
P39
LViWID M 16 S lidE dMilli G lP P038 P039 M i REBRANDO b 2020154 21PM
widia.com
TiAlN
General Purpose Solid Carbide End Mills • Roughing/Finishing
Series 4000 4010 • VariMill™ GP
Series 4000 4010 • VariMill GP
grade TiAlN
TiAlN
order # catalogue # D1 D
length of cut
Ap1 max
length
L
5825555 40000200T006 2,0 3 6,30 38
5825556 40000300T020 3,0 3 20,00 75
5825557 40000400T014 4,0 4 14,00 50
5825558 40100400T025 4,0 4 25,00 75
5825559 40000500T016 5,0 5 16,00 50
5825560 40100500T030 5,0 5 30,00 75
5825573 40000600T016 6,0 6 16,00 50
5825574 40100600T019 6,0 6 19,00 63
5825575 40100600T030 6,0 6 30,00 75
5825576 40000800T019 8,0 8 19,00 63
5825577 40100800T040 8,0 8 40,00 100
5825578 40001000T022 10,0 10 22,00 72
5825579 40101000T040 10,0 10 40,00 100
5825580 40001200T025 12,0 12 25,00 75
5825581 40101200T045 12,0 12 45,00 150
5825583 40001400T032 14,0 14 32,00 83
5825584 40101400T050 14,0 14 50,00 100
5825585 40001600T032 16,0 16 32,00 89
5825586 40101600T065 16,0 16 65,00 150
5825587 40001800T038 18,0 18 38,00 100
5825588 40102000T056 20,0 20 56,00 125
NOTE: For application data, please see pages P42–P43.
• Centre cutting.
• Standard items listed. Additional styles
and coatings made-to-order.
rst choice
alternate choice
End Mill Tolerances
D1 tolerance e8 D
tolerance h6
+ / -
) 3 -0,014/-0,028 ) 3 0/0,006
> 3–6 -0,020/-0,038 > 3–6 0/0,008
> 6–10 -0,025/-0,047 > 6–10 0/0,009
> 10–18 -0,032/-0,059 > 10–18 0/0,011
> 18–30 -0,040/-0,073 > 18–30 0/0,013
General Purpose Solid Carbide End Mills
WID_Master16_SolidEndMilling_GeneralPurpose_P038_P039_Metric_REBRAND.indd 39 10/30/15 2:30 PM
P40
LViWID M 16 S lidE dMilli G lP P040 P041 M i REBRANDO b 20 20154 21PM
widia.com
General Purpose Solid Carbide End Mills • Roughing/Finishing
Application Data • Series D004 4004 • VariMill™ GP
General Purpose Solid Carbide End Mills
Series D004 4004 • TiAlN • VariMill GP
Material
Group
Side Milling (A)
and Slotting (B) TiAlN Recommended feed per tooth (fz = mm/th) for side milling (A).
For slotting (B), reduce fz by 20%.
AB
Cutting
Speed — vc
m/min
D1 — Diameter
ap ae ap min max mm 1,0 2,0 3,0 4,0 5,0 6,0 8,0 10,0 12,0 14,0 16,0 18,0 20,0
P
0
Ap1 max 0,1 x D 0,5 x D 150 – 200 fz 0,007 0,014 0,021 0,028 0,036 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114
1
Ap1 max 0,1 x D 0,5 x D 150 – 200 fz 0,007 0,014 0,021 0,028 0,036 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114
2
Ap1 max 0,1 x D 0,5 x D 140 – 190 fz 0,007 0,014 0,021 0,028 0,036 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114
3
Ap1 max 0,1 x D 0,5 x D 120 – 160 fz 0,006 0,011 0,017 0,023 0,030 0,036 0,050 0,061 0,070 0,079 0,087 0,095 0,101
4
Ap1 max 0,1 x D 0,5 x D 90 – 150 fz 0,005 0,010 0,016 0,021 0,027 0,033 0,045 0,054 0,062 0,070 0,077 0,083 0,088
M1
Ap1 max 0,1 x D 0,5 x D 90 – 115 fz 0,006 0,011 0,017 0,023 0,030 0,036 0,050 0,061 0,070 0,079 0,087 0,095 0,101
2
Ap1 max 0,1 x D 0,5 x D 60 – 80 fz 0,005 0,009 0,014 0,019 0,024 0,029 0,040 0,048 0,056 0,063 0,070 0,076 0,081
K1
Ap1 max 0,1 x D 0,5 x D 120 – 150 fz 0,007 0,014 0,021 0,028 0,036 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114
2
Ap1 max 0,1 x D 0,5 x D 110 – 140 fz 0,006 0,011 0,017 0,023 0,030 0,036 0,050 0,061 0,070 0,079 0,087 0,095 0,101
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group.
Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on >12mm diameters.
Series D004 4004 • Uncoated • VariMill GP
Material
Group
Side Milling (A)
and Slotting (B) uncoated Recommended feed per tooth (fz = mm/th) for side milling (A).
For slotting (B), reduce fz by 20%.
AB
Cutting
Speed — vc
m/min
D1 — Diameter
ap ae ap min max mm 1,0 2,0 3,0 4,0 6,0 8,0 10,0 12,0 16,0 20,0
P
0
Ap1 max 0,1 x D 0,5 x D 120 – 160 fz 0,007 0,014 0,021 0,028 0,044 0,060 0,072 0,083 0,101 0,114
1
Ap1 max 0,1 x D 0,5 x D 120 – 160 fz 0,007 0,014 0,021 0,028 0,044 0,060 0,072 0,083 0,101 0,114
2
Ap1 max 0,1 x D 0,5 x D 112 – 152 fz 0,007 0,014 0,021 0,028 0,044 0,060 0,072 0,083 0,101 0,114
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group.
Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on >12mm diameters.
WID_Master16_SolidEndMilling_GeneralPurpose_P040_P041_Metric_REBRAND.indd 40 10/30/15 2:30 PM
P41
LViWID M 16 S lidE dMilli G lP P040 P041 M i REBRANDO b 2020154 21PM
widia.com
General Purpose Solid Carbide End Mills • Roughing/Finishing
Application Data • Series D014 2528 4014 4024 • VariMill™ GP
General Purpose Solid Carbide End Mills
Series D014 2528 4014 4024 • TiAlN • VariMill GP
Material
Group
Side Milling (A) TiAlN Recommended feed per tooth (fz = mm/th) for side milling (A).
A
Cutting
Speed — vc
m/min
D1 — Diameter
ap ae min max mm 2,0 3,0 4,0 5,0 6,0 8,0 10,0 12,0 14,0 16,0 18,0 20,0
P
0
Ap1 max 0,1 x D 150 – 200 fz 0,014 0,021 0,028 0,036 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114
1
Ap1 max 0,1 x D 150 – 200 fz 0,014 0,021 0,028 0,036 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114
2
Ap1 max 0,1 x D 140 – 190 fz 0,014 0,021 0,028 0,036 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114
3
Ap1 max 0,1 x D 120 – 160 fz 0,011 0,017 0,023 0,030 0,036 0,050 0,061 0,070 0,079 0,087 0,095 0,101
4
Ap1 max 0,1 x D 90 – 150 fz 0,010 0,016 0,021 0,027 0,033 0,045 0,054 0,062 0,070 0,077 0,083 0,088
M1
Ap1 max 0,1 x D 90 – 115 fz 0,011 0,017 0,023 0,030 0,036 0,050 0,061 0,070 0,079 0,087 0,095 0,101
2
Ap1 max 0,1 x D 60 – 80 fz 0,009 0,014 0,019 0,024 0,029 0,040 0,048 0,056 0,063 0,070 0,076 0,081
K1
Ap1 max 0,1 x D 120 – 150 fz 0,014 0,021 0,028 0,036 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114
2
Ap1 max 0,1 x D 110 – 140 fz 0,011 0,017 0,023 0,030 0,036 0,050 0,061 0,070 0,079 0,087 0,095 0,101
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group.
Above parameters are based on ideal conditions.For smaller taper machining centres, please adjust parameters accordingly on >12mm diameters.
Series D014 2528 4014 4024 • Uncoated • VariMill GP
Material
Group
Side Milling (A) uncoated Recommended feed per tooth (fz = mm/th) for side milling (A).
ACutting Speed — vc
m/min D1 — Diameter
ap ae min max mm 3,0 4,0 6,0 8,0 10,0 12,0 16,0 20,0
P
0
Ap1 max 0,1 x D 120 – 160 fz 0,021 0,028 0,044 0,060 0,072 0,083 0,101 0,114
1
Ap1 max 0,1 x D 120 – 160 fz 0,021 0,028 0,044 0,060 0,072 0,083 0,101 0,114
2
Ap1 max 0,1 x D 112 – 152 fz 0,021 0,028 0,044 0,060 0,072 0,083 0,101 0,114
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group.
Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on >12mm diameters.
WID_Master16_SolidEndMilling_GeneralPurpose_P040_P041_Metric_REBRAND.indd 41 10/30/15 2:30 PM
P42
LViWID M 16 S lidE dMilli G lP P042 P043 M i REBRANDO b 20 20154 21PM
widia.com
General Purpose Solid Carbide End Mills • Roughing/Finishing
Application Data • Series D010 2848 4000 • VariMill™ GP
General Purpose Solid Carbide End Mills
Series D010 2848 4000 • TiAlN • VariMill GP
Material
Group
Side Milling (A)
and Slotting (B) TiAlN Recommended feed per tooth (fz = mm/th) for side milling (A).
For slotting (B), reduce fz by 20%.
AB
Cutting
Speed — vc
m/min
D1 — Diameter
ap ae ap min max mm 3,0 4,0 5,0 6,0 8,0 10,0 12,0 14,0 16,0 18,0 20,0
P
0
Ap1 max 0,1 x D 0,5 x D 150 – 200 fz 0,021 0,028 0,036 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114
1
Ap1 max 0,1 x D 0,5 x D 150 – 200 fz 0,021 0,028 0,036 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114
2
Ap1 max 0,1 x D 0,5 x D 140 – 190 fz 0,021 0,028 0,036 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114
3
Ap1 max 0,1 x D 0,5 x D 120 – 160 fz 0,017 0,023 0,030 0,036 0,050 0,061 0,070 0,079 0,087 0,095 0,101
4
Ap1 max 0,1 x D 0,5 x D 90 – 150 fz 0,016 0,021 0,027 0,033 0,045 0,054 0,062 0,070 0,077 0,083 0,088
M1
Ap1 max 0,1 x D 0,5 x D 90 – 115 fz 0,017 0,023 0,030 0,036 0,050 0,061 0,070 0,079 0,087 0,095 0,101
2
Ap1 max 0,1 x D 0,5 x D 60 – 80 fz 0,014 0,019 0,024 0,029 0,040 0,048 0,056 0,063 0,070 0,076 0,081
K1
Ap1 max 0,1 x D 0,5 x D 120 – 150 fz 0,021 0,028 0,036 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114
2
Ap1 max 0,1 x D 0,5 x D 110 – 140 fz 0,017 0,023 0,030 0,036 0,050 0,061 0,070 0,079 0,087 0,095 0,101
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for fi nishing applications or for lower hardness (machinability) within group.
Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on >12mm diameters.
Application Data • Series 4010 • VariMill™ GP
Series 4010 • TiAlN • VariMill GP
Material
Group
Side Milling (A) TiAlN Recommended feed per tooth (fz = mm/th) for side milling (A).
A
Cutting
Speed — vc
m/min
D1 — Diameter
ap ae min max mm 3,0 4,0 5,0 6,0 8,0 10,0 12,0 14,0 16,0 18,0 20,0
P
0
Ap1 max 0,1 x D 150 – 200 fz 0,021 0,028 0,036 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114
1
Ap1 max 0,1 x D 150 – 200 fz 0,021 0,028 0,036 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114
2
Ap1 max 0,1 x D 140 – 190 fz 0,021 0,028 0,036 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114
3
Ap1 max 0,1 x D 120 – 160 fz 0,017 0,023 0,030 0,036 0,050 0,061 0,070 0,079 0,087 0,095 0,101
4
Ap1 max 0,1 x D 90 – 150 fz 0,016 0,021 0,027 0,033 0,045 0,054 0,062 0,070 0,077 0,083 0,088
M1
Ap1 max 0,1 x D 90 – 115 fz 0,017 0,023 0,030 0,036 0,050 0,061 0,070 0,079 0,087 0,095 0,101
2
Ap1 max 0,1 x D 60 – 80 fz 0,014 0,019 0,024 0,029 0,040 0,048 0,056 0,063 0,070 0,076 0,081
K1
Ap1 max 0,1 x D 120 – 150 fz 0,021 0,028 0,036 0,044 0,060 0,072 0,083 0,092 0,101 0,108 0,114
2
Ap1 max 0,1 x D 110 – 140 fz 0,017 0,023 0,030 0,036 0,050 0,061 0,070 0,079 0,087 0,095 0,101
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for fi nishing applications or for lower hardness (machinability) within group.
Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on >12mm diameters.
WID_Master16_SolidEndMilling_GeneralPurpose_P042_P043_Metric_REBRAND.indd 42 10/30/15 2:30 PM
P43
LViWID M 16 S lidE dMilli G lP P042 P043 M i REBRANDO b 2020154 21PM
widia.com
General Purpose Solid Carbide End Mills
Series 4010 • Uncoated • VariMill GP
Material
Group
Side Milling (A) uncoated Recommended feed per tooth (fz = mm/th) for side milling (A).
ACutting Speed — vc
m/min D1 — Diameter
ap ae min max mm 3,0 4,0 6,0 8,0 10,0 12,0 16,0 20,0
P
0
Ap1 max 0,1 x D 120 – 160 fz 0,021 0,028 0,044 0,060 0,072 0,083 0,101 0,114
1
Ap1 max 0,1 x D 120 – 160 fz 0,021 0,028 0,044 0,060 0,072 0,083 0,101 0,114
2
Ap1 max 0,1 x D 112 – 152 fz 0,021 0,028 0,044 0,060 0,072 0,083 0,101 0,114
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group.
Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on >12mm diameters.
General Purpose Solid Carbide End Mills • Roughing/Finishing
Application Data • Series 4010 • VariMill™ GP
WID_Master16_SolidEndMilling_GeneralPurpose_P042_P043_Metric_REBRAND.indd 43 10/30/15 2:30 PM
P44
LViWID M 16 S lidE dMilli G lP P044 P045 M i REBRANDN b 12 20159 42AM
widia.com
How Do Catalogue Numbers Work?
General Purpose Solid Carbide End Mills • Roughing/Finishing
Catalogue Numbering System
40040800T020
Each character in our catalogue number signi es a speci c trait of
that product. Use the following key columns and corresponding
images toeasily identify which attributes apply.
4004 0800 T 020
List Diameter
mm
Shank
Style
Ap1 max
mm
D002 = 2FL Chamfer DIN 6527 — Short
D012 = 2FL Chamfer DIN 6527 — Long
2819 = 2FL Chamfer DIN 6528
4002 = 2FL Chamfer Factory Standard —
Short/Regular
4012 = 2FL Chamfer Factory Standard —
Long
4022 = 2FL Chamfer Factory Standard —
Extra Long
D001 = 2FL Ball Nose DIN 6527 Short
D011 = 2FL Ball Nose DIN 6527 Long
2838 = 2FL Ball Nose DIN 6528
4001 = 2FL Ball Nose Factory Standard —
Short/Regular
4011 = 2FL Ball Nose Factory Standard —
Long
4021 = 2FL Ball Nose Factory Standard —
Extra Long
D004 = 4FL Chamfer DIN 6527 — Short
D014 = 4FL Chamfer DIN 6527 — Long
2528 = 4FL Chamfer DIN 6528
4004 = 4FL Chamfer Factory Standard —
Short/Regular
4014 = 4FL Chamfer Factory Standard —
Long
4024 = 4FL Chamfer Factory Standard —
Extra Long
D000 = 4FL Ball Nose DIN 6527 — Short
D010 = 4FL Ball Nose DIN 6527 — Long
T = Plain Shank
W = Weldon
®
Shank
WID_Master16_SolidEndMilling_GeneralPurpose_P044_P045_Metric_REBRAND.indd 44 11/12/15 9:57 AM
LViWID M 16 S lidE dMilli G lP P044 P045 M i REBRANDN b 1220159 42AM
WIDIA-Hanita™ carbide-tipped end mills can provide unique advantages over solid
tools, especially in large diameter sizes. They can be run at the same high cutting
speeds as solid carbide but are usually less costly because of their steel body. The
tougher body also absorbs shock, which enables it to perform well in conventional
machines with less-than-rigid setups. Our in-house brazing capabilities and expertise
provide our customers with fl exibility in using carbide-tipped cutting edges on many
styles, geometries, and sizes of standard and custom solution tooling.
• Available up to a diameter of 250mm.
• Continuous edge carbide diameter of up to 300mm.
• Centre cutting geometries available.
• Maximum helix angle is 45°.
• Available in multiple spindle connections.
• Outstanding custom solutions capabilities.
To learn more about our innovations, contact your local
Authorised Distributor or visit widia.com.
Solid Carbide-
Tipped End Mills
WID_Master16_SolidEndMilling_GeneralPurpose_P044_P045_Metric_REBRAND.indd 45 11/12/15 9:57 AM
LViWID M 16 S lidE dMilli HSS E PM Q000 Q001 M i REBRANDO b 20 20154 23PMLViWID M 16 S lidE dMilli HSS E PM Q000 Q001 M i REBRANDO b 20 20154 23PM
WID_Master16_SolidEndMilling_HSS-E-PM_Q000_Q001_Metric_REBRAND.indd 2 10/30/15 2:30 PM
LViWID M 16 S lidE dMilli HSS E PM Q000 Q001 M i REBRANDO b 2020154 23PM
widia.com Q1
LViWID M 16 S lidE dMilli HSS E PM Q000 Q001 M i REBRANDO b 2020154 23PM
High-Performance High-Speed Steel (HSS-E/PM) ......................................................................................... Q2–Q13
Solid End Milling • High-Performance High-Speed Steel (HSS-E/PM)
WID_Master16_SolidEndMilling_HSS-E-PM_Q000_Q001_Metric_REBRAND.indd 3 10/30/15 2:30 PM
Q2
LViWID M 16 S lidE dMilli HSS E PM Q002 Q003 M i REBRANDN b 12 20159 45AM
widia.com
WavCut tools for machining titanium are best suited for applications in
aerospace and energy, providing high Metal Removal Rates (MRR) and
increased tool life. The special wave design of these 5-, 6-, and 8-fl uted end
mills require less horsepower during roughing and semi-fi nishing, and provide
excellent chip formation. Since chips evacuate easily, WavCut tools do not recut
chips thus increasing tool life. Also, the edges change the radial cutting edge
position without changing the diameter.
• Centre cutting offering excellent performance in roughing
applications, especially in titanium.
• Capable of deep-slotting cuts for high Metal Removal
Rates (MRR).
• Special wave design for excellent chip formation and
evacuation preventing re-cutting of chips.
Centre cutting for plunging
and ramping.
35° helix for roughing.
Special wave design helps
chip formation.
High cobalt and vanadium content
PM HSS providing superior wear
resistance and red hardness.
WavCut
High-Performance Solid Carbide End Mills •
WavCut™
WID_Master16_SolidEndMilling_HSS-E-PM_Q002_Q003_Metric_REBRAND.indd 2 11/12/15 9:57 AM
Q3
LViWID M 16 S lidE dMilli HSS E PM Q002 Q003 M i REBRANDN b 1220159 45AM
widia.com
WavCut™ Series
Other featured HSS Series
• Benefi t from reliable and trouble-free machining results using HSS WavCut cutter.
• Drastically reduce the risk of re-cutting chips, especially with vertical machines
having multiple spindles.
• Increase stock removal rates over regular roughing tools due to reduced
horsepower consumption.
• Sophisticated roughing profi les capable of dealing with common chip formation challenges.
• High cobalt and vanadium content PM HSS providing superior wear resistance and red hardness.
660W Series
• 4-fl ute 35° helix for slotting.
• 6-fl ute 35° helix, for slotting,
and in certain cases, pocketing
and profi ling.
• Centre cutting, chamfered
corner, uncoated.
6N06 Series 6N70 Series
• 4- and 5-fl ute, 30° helix.
• Fine pitch style
roughing profi le.
• Centre cutting and
chamfered corner.
• 3- and 6-fl ute, 30° helix.
• Fine pitch style
roughing profi le.
• Centre cutting
and chamfered corner.
6NL6 Series 1N0MJJ
• 4- and 5-fl ute, 30° helix.
• Extended neck for
long-reach applications.
• Fine pitch style
roughing profi le.
• 4-fl ute.
• 30° helix.
• Square corner.
• JIS standard.
• Centre cutting.
1N77 Series
• 4-fl ute.
• 38° helix.
• Unequal fl ute spacing.
• Centre cutting.
WID_Master16_SolidEndMilling_HSS-E-PM_Q002_Q003_Metric_REBRAND.indd 3 11/12/15 9:58 AM
Q4
LViWID M 16 S lidE dMilli HSS E PM Q004 Q005 M i REBRANDO b 20 20154 24PM
widia.com
UNCOATED - WW
High-Performance High-Speed Steel (HSS-E/PM) • Roughing
Series 664W 660W 661W • WavCut I™
Series 664W 660W 661W • WavCut I
grade UNCOATED-WW
order # catalogue # D1 D D3
length of cut
Ap1 max L3
length
L BCH ZU
3871691 664W25008WW 25,0 25 23 26,00 46,00 102 1,00 5
3871692 660W25008WW 25,0 25 23 45,00 65,00 121 1,00 5
3871833 661W25008WW 25,0 25 23 90,00 110,00 166 1,00 6
3871834 664W32009WW 32,0 32 30 32,00 52,00 112 1,00 6
3871835 660W32009WW 32,0 32 30 53,00 73,00 133 1,00 6
3871836 661W32009WW 32,0 32 30 100,00 110,00 170 1,00 6
3871837 664W40009WW 40,0 32 — 38,00 58,00 118 1,00 6
3871838 660W40009WW 40,0 32 — 56,00 65,00 125 1,00 6
3871839 661W40009WW 40,0 32 — 100,00 110,00 170 1,00 6
3871840 664W50000WW 50,0 50 47 40,00 60,00 140 1,00 6
3871841 660W50000WW 50,0 50 47 75,00 95,00 175 1,00 6
3871842 661W50000WW 50,0 50 47 110,00 130,00 210 1,00 8
• Centre cutting.
• Standard items listed. Additional styles
and coatings made-to-order.
rst choice
alternate choice
End Mill Tolerances
D1 tolerance D
tolerance h6
+ / -
All +0,05/-0,05 ) 3 0/0,006
> 3–6 0/0,008
> 6–10 0/0,009
> 10–18 0/0,011
> 18–30 0/0,013
> 30–50 0/0,016
High-Performance High-Speed Steel (HSS-E/PM)
Detail X
NOTE: For application data, please see page Q10.
X
WID_Master16_SolidEndMilling_HSS-E-PM_Q004_Q005_Metric_REBRAND.indd 4 10/30/15 2:31 PM
Q5
LViWID M 16 S lidE dMilli HSS E PM Q004 Q005 M i REBRANDO b 2020154 24PM
widia.com
TiAlN-LW
High-Performance High-Speed Steel (HSS-E/PM) • Roughing
Series 6N06
Series 6N06
grade TiAlN-LW
TiAlN
order # catalogue # D1 D
length of cut
Ap1 max
length
L BCH ZU
1660373 6N0606002LW 6,0 6 13,00 57 0,25 4
1660389 6N0608004LW 8,0 10 19,00 69 0,25 4
1660397 6N0609004LW 9,0 10 19,00 69 0,25 4
1660405 6N0610004LW 10,0 10 22,00 72 0,25 4
1660413 6N0611005LW 11,0 12 22,00 79 0,25 4
1660421 6N0612005LW 12,0 12 26,00 83 0,35 4
1660437 6N0614005LW 14,0 12 26,00 83 0,35 4
1660453 6N0616006LW 16,0 16 32,00 92 0,35 4
1660471 6N0618006LW 18,0 16 32,00 92 0,35 4
1660479 6N0620007LW 20,0 20 38,00 104 0,35 4
1660487 6N0622007LW 22,0 20 38,00 104 0,50 5
1660497 6N0625008LW 25,0 25 45,00 121 0,50 5
1660507 6N0630008LW 30,0 25 45,00 121 0,50 5
• Centre cutting.
• Fine pitch.
• Standard items listed. Additional styles
and coatings made-to-order.
rst choice
alternate choice
Detail X
End Mill Tolerances
D1 tolerance D
tolerance h6
+ / -
All +0,12/-0,12 ) 3 0/0,006
> 3–6 0/0,008
> 6–10 0/0,009
> 10–18 0/0,011
> 18–30 0/0,013
High-Performance High-Speed Steel (HSS-E/PM)
NOTE: For application data, please see page Q10.
X
WID_Master16_SolidEndMilling_HSS-E-PM_Q004_Q005_Metric_REBRAND.indd 5 10/30/15 2:31 PM
Q6
LViWID M 16 S lidE dMilli HSS E PM Q006 Q007 M i REBRANDO b 20 20154 24PM
widia.com
TiAlN-LW TiAlN-LT
High-Performance High-Speed Steel (HSS-E/PM) • Roughing
Series 6N70
Series 6N70
grade TiAlN-LT
TiAlN
order # catalogue #
grade TiAlN-LW
TiAlN
order # catalogue # D1 D
length of cut
Ap1 max
length
L BCH ZU
2990812 6N7006002LT 1660596 6N7006002LW 6,0 6 13,00 57 0,25 4
2992083 6N7008004LT 1660598 6N7008004LW 8,0 10 19,00 69 0,25 4
1981089 6N7010004LT 1660600 6N7010004LW 10,0 10 22,00 72 0,25 4
1981090 6N7012005LT 1660602 6N7012005LW 12,0 12 26,00 83 0,35 4
3078687 6N7014005LT — 14,0 12 26,00 83 — 4
— 1660604 6N7014005LW 14,0 12 26,00 83 0,35 4
1717017 6N7016006LT 1660606 6N7016006LW 16,0 16 32,00 92 0,35 4
3077681 6N7018006LT — 18,0 16 32,00 92 — 4
— 1660608 6N7018006LW 18,0 16 32,00 92 0,35 4
1716039 6N7020007LT 1660610 6N7020007LW 20,0 20 38,00 104 0,35 4
2992087 6N7025008LT 1660612 6N7025008LW 25,0 25 45,00 121 0,50 4
3078692 6N7032009LT — 32,0 20 53,00 133 — 6
— 1660614 6N7032009LW 32,0 32 53,00 133 0,50 6
• Centre cutting.
• Flat shallow pitch.
• Standard items listed. Additional styles
and coatings made-to-order.
rst choice
alternate choice
Detail X
End Mill Tolerances
D1 tolerance D
tolerance h6
+ / -
All +0,12/-0,12 ) 3 0/0,006
> 3–6 0/0,008
> 6–10 0/0,009
> 10–18 0/0,011
> 18–30 0/0,013
High-Performance High-Speed Steel (HSS-E/PM)
NOTE: For application data, please see page Q11.
X
WID_Master16_SolidEndMilling_HSS-E-PM_Q006_Q007_Metric_REBRAND.indd 6 10/30/15 2:31 PM
Q7
LViWID M 16 S lidE dMilli HSS E PM Q006 Q007 M i REBRANDO b 2020154 24PM
widia.com
High-Performance High-Speed Steel (HSS-E/PM) • Roughing
Series 6NL6
End Mill Tolerances
D1 tolerance D
tolerance h6
+ / -
All +0,12/-0,12 ) 3 0/0,006
> 3–6 0/0,008
> 6–10 0/0,009
> 10–18 0/0,011
> 18–30 0/0,013
Series 6NL6
TiAlN-LW
grade TiAlN-LW
TiAlN
order # catalogue # D1 D D3
length of cut
Ap1 max L3
length
L BCH ZU
1660617 6NL610004LW 10,0 10 10 22,00 69,00 110 0,25 4
1660623 6NL612005LW 12,0 12 12 26,00 78,00 125 0,35 4
1660629 6NL616006LW 16,0 16 15 32,00 87,00 138 0,35 4
1660635 6NL620007LW 20,0 20 20 38,00 108,00 160 0,35 4
1660640 6NL625008LW 25,0 25 25 45,00 155,00 216 0,50 5
High-Performance High-Speed Steel (HSS-E/PM)
L3
D3
• Centre cutting.
• Fine pitch.
• Standard items listed. Additional styles
and coatings made-to-order.
rst choice
alternate choice
Detail X
NOTE: For application data, please see page Q11.
X
WID_Master16_SolidEndMilling_HSS-E-PM_Q006_Q007_Metric_REBRAND.indd 7 10/30/15 2:31 PM
Q8
LViWID M 16 S lidE dMilli HSS E PM Q008 Q009 M i REBRANDO b 20 20154 24PM
widia.com
TiAlN
High-Performance High-Speed Steel (HSS-E/PM) • Finishing
Series 1N0M JJ
End Mill Tolerances
D1 tolerance D
tolerance h6
+ / -
All +0,02/-0,0 ) 3 0/0,006
> 3–6 0/0,008
> 6–10 0/0,009
> 10–18 0/0,011
> 18–30 0/0,013
Series 1N0M JJ
grade TiAlN-LJ
TiAlN
order # catalogue # D1 D
length of cut
Ap1 max
length
L
2605576 1N0M03002LJ 3,0 6 10,00 50
2605577 1N0M04003LJ 4,0 8 12,00 60
2605578 1N0M05003LJ 5,0 8 15,00 60
2605579 1N0M06003LJ 6,0 8 15,00 60
2605580 1N0M08004LJ 8,0 10 20,00 65
2605581 1N0M10004LJ 10,0 10 25,00 75
2605582 1N0M12005LJ 12,0 12 30,00 80
2605583 1N0M14006LJ 14,0 16 35,00 90
2605584 1N0M16006LJ 16,0 16 40,00 95
2605585 1N0M18007LJ 18,0 20 40,00 105
2605586 1N0M20007LJ 20,0 20 45,00 110
2605587 1N0M22007LJ 22,0 20 45,00 125
High-Performance High-Speed Steel (HSS-E/PM)
• Centre cutting.
• Standard items listed. Additional styles
and coatings made-to-order.
rst choice
alternate choice
NOTE: For application data, please see page Q12.
WID_Master16_SolidEndMilling_HSS-E-PM_Q008_Q009_Metric_REBRAND.indd 8 10/30/15 2:31 PM
Q9
LViWID M 16 S lidE dMilli HSS E PM Q008 Q009 M i REBRANDO b 2020154 24PM
widia.com
TiCN-CT TICN-CW
High-Performance High-Speed Steel (HSS-E/PM) • Finishing
Series 1N77 • VariMill™
Series 1N77 • VariMill
grade TiCN-CT
TiCN
order # catalogue #
grade TiCN-CW
TiCN
order # catalogue # D1 D
length of cut
Ap1 max
length
L
2605715 1N7706002CT 2605716 1N7706002CW 6,0 6 13,00 57
2605717 1N7708004CT 2605718 1N7708004CW 8,0 10 19,00 69
2605719 1N7710004CT 2605720 1N7710004CW 10,0 10 22,00 72
2605721 1N7712005CT 2605722 1N7712005CW 12,0 12 26,00 83
2605823 1N7714005CT 2605824 1N7714005CW 14,0 12 26,00 83
2605825 1N7716006CT 2605826 1N7716006CW 16,0 16 32,00 92
2605827 1N7718006CT 2605828 1N7718006CW 18,0 16 32,00 92
2605829 1N7720007CT 2605830 1N7720007CW 20,0 20 38,00 104
2605831 1N7722007CT 2605832 1N7722007CW 22,0 20 38,00 104
2605843 1N7725008CT 2605844 1N7725008CW 25,0 25 45,00 121
2605845 1N7730008CT 2605846 1N7730008CW 30,0 25 45,00 121
• Centre cutting.
• Unequal ute spacing.
• Standard items listed. Additional styles
and coatings made-to-order.
rst choice
alternate choice
End Mill Tolerances
D1 tolerance D
tolerance h6
+ / -
All +0,04/-0,0 ) 3 0/0,006
> 3–6 0/0,008
> 6–10 0/0,009
> 10–18 0/0,011
> 18–30 0/0,013
High-Performance High-Speed Steel (HSS-E/PM)
NOTE: For application data, please see page Q13.
WID_Master16_SolidEndMilling_HSS-E-PM_Q008_Q009_Metric_REBRAND.indd 9 10/30/15 2:31 PM
Q10
LViWID M 16 S lidE dMilli HSS E PM Q010 Q011 M i REBRANDN b 12 20159 47AM
widia.com
High-Performance High-Speed Steel (HSS-E/PM) • Roughing
Application Data • Series 664W 660W 661W • WavCut I™
High-Performance High-Speed Steel (HSS-E/PM)
Series 664W 660W 661W • WavCut I
Material
Group
Side Milling (A)
and Slotting (B) uncoated Recommended feed per tooth (fz = mm/th) for side milling (A).
For slotting (B), reduce fz by 20%.
AB
Cutting Speed — vc
m/min D1 — Diameter
ap ae ap min max mm 25,0 32,0 40,0 50,0
P5
1,5 x D 0,4 x D 1 x D 10 – 14 fz 0,091 0,105 0,124 0,146
M1
1,5 x D 0,4 x D 1 x D 10 – 14 fz 0,114 0,131 0,155 0,182
2
1,5 x D 0,4 x D 1 x D 10 – 12 fz 0,091 0,105 0,124 0,146
S3
1,5 x D 0,4 x D 0,75 x D 6 – 11 fz 0,091 0,105 0,124 0,146
4
1,5 x D 0,4 x D 0,75 x D 6 – 11 fz 0,084 0,096 0,114 0,134
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for fi nishing applications or for lower hardness (machinability) within group.
Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on diameters >12mm.
Application Data • Series 6N06
Series 6N06
Material
Group
Side Milling (A)
and Slotting (B) TiCN TiAlN Recommended feed per tooth (fz = mm/th) for side milling (A).
For slotting (B), reduce fz by 20%.
AB
Cutting
Speed — vc
m/min
Cutting
Speed — vc
m/min
D1 — Diameter
ap ae ap min max min max mm 6,0 8,0 10,0 12,0 16,0 18,0 20,0 25,0 30,0
P
1
1,5 x D 0,5 x D 1 x D 56 – 64 70 – 80 fz 0,046 0,062 0,072 0,079 0,097 0,104 0,109 0,119 0,143
2
1,5 x D 0,5 x D 1 x D 48 – 64 60 – 80 fz 0,046 0,062 0,072 0,079 0,097 0,104 0,109 0,119 0,143
3
1,5 x D 0,5 x D 1 x D 40 – 56 50 – 70 fz 0,038 0,052 0,061 0,067 0,084 0,091 0,097 0,109 0,131
5
1,5 x D 0,5 x D 1 x D 20 – 28 25 – 35 fz 0,031 0,042 0,048 0,054 0,067 0,073 0,078 0,087 0,105
M
1
1,5 x D 0,5 x D 1 x D 20 – 28 25 – 35 fz 0,038 0,052 0,061 0,067 0,084 0,091 0,097 0,109 0,131
2
1,5 x D 0,5 x D 1 x D 20 – 24 25 – 30 fz 0,031 0,042 0,048 0,054 0,067 0,073 0,078 0,087 0,105
3
1,5 x D 0,5 x D 1 x D 12 – 16 15 – 20 fz 0,026 0,035 0,040 0,045 0,055 0,059 0,062 0,068 0,082
K1
1,5 x D 0,5 x D 1 x D 56 – 64 70 – 80 fz 0,046 0,062 0,072 0,079 0,097 0,104 0,109 0,119 0,143
2
1,5 x D 0,5 x D 1 x D 40 – 56 50 – 70 fz 0,038 0,052 0,061 0,067 0,084 0,091 0,097 0,109 0,131
S
1
1,5 x D 0,5 x D 1 x D 12 – 24 15 – 30 fz 0,038 0,052 0,061 0,067 0,084 0,091 0,097 0,109 0,131
2
1,5 x D 0,5 x D 1 x D 4 – 12 5 – 15 fz 0,021 0,027 0,032 0,036 0,045 0,048 0,052 0,059 0,071
3
1,5 x D 0,5 x D 1 x D 12 – 22 15 – 28 fz 0,031 0,042 0,048 0,054 0,067 0,073 0,078 0,087 0,105
4
1,5 x D 0,5 x D 1 x D 12 – 22 15 – 28 fz 0,027 0,038 0,045 0,050 0,062 0,067 0,071 0,080 0,096
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for fi nishing applications or for lower hardness (machinability) within group.
Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on diameters >12mm.
WID_Master16_SolidEndMilling_HSS-E-PM_Q010_Q011_Metric_REBRAND.indd 10 11/12/15 9:58 AM
Q11
LViWID M 16 S lidE dMilli HSS E PM Q010 Q011 M i REBRANDN b 1220159 47AM
widia.com
Application Data • Series 6N70
Series 6N70
Material
Group
Side Milling (A)
and Slotting (B) TiAlN Recommended feed per tooth (fz = mm/th) for side milling (A).
For slotting (B), reduce fz by 20%.
AB
Cutting Speed — vc
m/min D1 — Diameter
ap ae ap min max mm 6,0 8,0 10,0 12,0 16,0 18,0 20,0 25,0 32,0
P
1
1,5 x D 0,5 x D 1 x D 70 – 80 fz 0,058 0,078 0,090 0,099 0,121 0,130 0,137 0,149 0,190
2
1,5 x D 0,5 x D 1 x D 60 – 80 fz 0,058 0,078 0,090 0,099 0,121 0,130 0,137 0,149 0,190
3
1,5 x D 0,5 x D 1 x D 50 – 70 fz 0,048 0,065 0,076 0,084 0,105 0,113 0,121 0,137 0,175
5
1,5 x D 0,5 x D 1 x D 25 – 35 fz 0,039 0,052 0,061 0,067 0,084 0,091 0,097 0,109 0,140
M
1
1,5 x D 0,5 x D 1 x D 25 – 35 fz 0,048 0,065 0,076 0,084 0,105 0,113 0,121 0,137 0,175
2
1,5 x D 0,5 x D 1 x D 25 – 30 fz 0,039 0,052 0,061 0,067 0,084 0,091 0,097 0,109 0,140
3
1,5 x D 0,5 x D 1 x D 15 – 20 fz 0,033 0,044 0,051 0,056 0,068 0,073 0,078 0,085 0,109
K1
1,5 x D 0,5 x D 1 x D 70 – 80 fz 0,058 0,078 0,090 0,099 0,121 0,130 0,137 0,149 0,190
2
1,5 x D 0,5 x D 1 x D 50 – 70 fz 0,048 0,065 0,076 0,084 0,105 0,113 0,121 0,137 0,175
S
1
1,5 x D 0,5 x D 1 x D 15 – 30 fz 0,048 0,065 0,076 0,084 0,105 0,113 0,121 0,137 0,175
2
1,5 x D 0,5 x D 1 x D 5 – 15 fz 0,026 0,034 0,040 0,045 0,056 0,060 0,065 0,074 0,094
3
1,5 x D 0,5 x D 1 x D 15 – 30 fz 0,039 0,052 0,061 0,067 0,084 0,091 0,097 0,109 0,140
4
1,5 x D 0,5 x D 1 x D 15 – 30 fz 0,034 0,048 0,056 0,062 0,077 0,083 0,089 0,100 0,128
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for fi nishing applications or for lower hardness (machinability) within group.
Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on diameters >12mm.
High-Performance High-Speed Steel (HSS-E/PM) • Roughing
High-Performance High-Speed Steel (HSS-E/PM)
Application Data • Series 6NL6
Series 6NL6
Material
Group
Side Milling (A)
and Slotting (B) TiAlN Recommended feed per tooth (fz = mm/th) for side milling (A).
For slotting (B), reduce fz by 20%.
AB
Cutting Speed — vc
m/min D1 — Diameter
ap ae ap min max mm 10,0 12,0 16,0 20,0 25,0
P
1
1,5 x D 0,5 x D 1 x D 70 – 80 fz 0,063 0,070 0,085 0,096 0,104
2
1,5 x D 0,5 x D 1 x D 60 – 80 fz 0,063 0,070 0,085 0,096 0,104
3
1,5 x D 0,5 x D 1 x D 50 – 70 fz 0,053 0,059 0,073 0,085 0,096
5
1,5 x D 0,5 x D 1 x D 25 – 35 fz 0,042 0,047 0,059 0,068 0,076
M
1
1,5 x D 0,5 x D 1 x D 25 – 35 fz 0,053 0,059 0,073 0,085 0,096
2
1,5 x D 0,5 x D 1 x D 25 – 30 fz 0,042 0,047 0,059 0,068 0,076
3
1,5 x D 0,5 x D 1 x D 15 – 20 fz 0,035 0,039 0,048 0,054 0,060
K1
1,5 x D 0,5 x D 1 x D 70 – 80 fz 0,063 0,070 0,085 0,096 0,104
2
1,5 x D 0,5 x D 1 x D 50 – 70 fz 0,053 0,059 0,073 0,085 0,096
S
1
1,5 x D 0,5 x D 1 x D 15 – 30 fz 0,053 0,059 0,073 0,085 0,096
2
1,5 x D 0,5 x D 1 x D 5 – 15 fz 0,028 0,031 0,039 0,045 0,051
3
1,5 x D 0,5 x D 1 x D 15 – 30 fz 0,042 0,047 0,059 0,068 0,076
4
1,5 x D 0,5 x D 1 x D 10 – 20 fz 0,039 0,043 0,054 0,062 0,070
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for fi nishing applications or for lower hardness (machinability) within group.
Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on diameters >12mm.
WID_Master16_SolidEndMilling_HSS-E-PM_Q010_Q011_Metric_REBRAND.indd 11 11/12/15 9:58 AM
Q12
LViWID M 16 S lidE dMilli HSS E PM Q012 Q013 M i REBRANDO b 20 20154 23PM
widia.com
High-Performance High-Speed Steel (HSS-E/PM) • Finishing
Application Data • Series 1N0M JJ
High-Performance High-Speed Steel (HSS-E/PM)
Series 1N0M JJ
Material
Group
Side Milling (A)
and Slotting (B) TiAlN Recommended feed per tooth (fz = mm/th) for side milling (A).
For slotting (B), reduce fz by 20%.
AB
Cutting Speed — vc
m/min D1 — Diameter
ap ae ap min max mm 3,0 4,0 6,0 8,0 10,0 12,0 16,0 20,0 25,0
P
1
1,5 x D 0,5 x D 1 x D 70 – 80 fz 0,029 0,039 0,058 0,078 0,090 0,099 0,121 0,137 0,149
2
1,5 x D 0,5 x D 1 x D 60 – 80 fz 0,029 0,039 0,058 0,078 0,090 0,099 0,121 0,137 0,149
3
1,5 x D 0,5 x D 1 x D 50 – 70 fz 0,024 0,032 0,048 0,065 0,076 0,084 0,105 0,121 0,137
5
1,5 x D 0,5 x D 1 x D 25 – 35 fz 0,020 0,026 0,039 0,052 0,061 0,067 0,084 0,097 0,109
M
1
1,5 x D 0,5 x D 1 x D 25 – 35 fz 0,024 0,032 0,048 0,065 0,076 0,084 0,105 0,121 0,137
2
1,5 x D 0,5 x D 1 x D 25 – 30 fz 0,020 0,026 0,039 0,052 0,061 0,067 0,084 0,097 0,109
3
1,5 x D 0,5 x D 1 x D 15 – 20 fz 0,017 0,022 0,033 0,044 0,051 0,056 0,068 0,078 0,085
K1
1,5 x D 0,5 x D 1 x D 70 – 80 fz 0,029 0,039 0,058 0,078 0,090 0,099 0,121 0,137 0,149
2
1,5 x D 0,5 x D 1 x D 50 – 70 fz 0,024 0,032 0,048 0,065 0,076 0,084 0,105 0,121 0,137
N1
1,5 x D 0,5 x D 1 x D 300 – 375 fz 0,042 0,055 0,079 0,104 0,125 0,144 0,192 0,240 0,300
2
1,5 x D 0,5 x D 1 x D 230 – 300 fz 0,034 0,044 0,063 0,083 0,100 0,115 0,154 0,192 0,240
S
1
1,5 x D 0,5 x D 1 x D 15 – 30 fz 0,024 0,032 0,048 0,065 0,076 0,084 0,105 0,121 0,137
2
1,5 x D 0,5 x D 0,5 x D 5 – 15 fz 0,013 0,018 0,026 0,034 0,040 0,045 0,056 0,065 0,074
3
1,5 x D 0,5 x D 1 x D 15 – 28 fz 0,020 0,026 0,039 0,052 0,061 0,067 0,084 0,097 0,109
4
1,5 x D 0,5 x D 0,5 x D 15 – 28 fz 0,016 0,022 0,034 0,048 0,056 0,062 0,077 0,089 0,100
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group.
Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on diameters >12mm.
WID_Master16_SolidEndMilling_HSS-E-PM_Q012_Q013_Metric_REBRAND.indd 12 10/30/15 2:31 PM
Q13
LViWID M 16 S lidE dMilli HSS E PM Q012 Q013 M i REBRANDO b 2020154 23PM
widia.com
High-Performance High-Speed Steel (HSS-E/PM) • Finishing
Application Data • Series 1N77 • VariMill™
High-Performance High-Speed Steel (HSS-E/PM)
Series 1N77 • VariMill
Material
Group
Side Milling (A)
and Slotting (B) TiCN Recommended feed per tooth (fz = mm/th) for side milling (A).
For slotting (B), reduce fz by 20%.
AB
Cutting Speed — vc
m/min D1 — Diameter
ap ae ap min max mm 6,0 8,0 10,0 12,0 14,0 16,0 20,0 25,0 30,0
P
1
1,5 x D 0,5 x D 1 x D 56 – 64 fz 0,058 0,078 0,090 0,099 0,111 0,121 0,137 0,149 0,149
2
1,5 x D 0,5 x D 1 x D 48 – 64 fz 0,058 0,078 0,090 0,099 0,111 0,121 0,137 0,149 0,149
3
1,5 x D 0,5 x D 1 x D 40 – 56 fz 0,048 0,065 0,076 0,084 0,095 0,105 0,121 0,137 0,137
5
1,5 x D 0,5 x D 1 x D 20 – 28 fz 0,039 0,052 0,061 0,067 0,076 0,084 0,097 0,109 0,109
M
1
1,5 x D 0,5 x D 1 x D 20 – 28 fz 0,048 0,065 0,076 0,084 0,095 0,105 0,121 0,137 0,137
2
1,5 x D 0,5 x D 1 x D 20 – 24 fz 0,039 0,052 0,061 0,067 0,076 0,084 0,097 0,109 0,109
3
1,5 x D 0,5 x D 1 x D 12 – 16 fz 0,033 0,044 0,051 0,056 0,062 0,068 0,078 0,085 0,085
K1
1,5 x D 0,5 x D 1 x D 56 – 64 fz 0,058 0,078 0,090 0,099 0,111 0,121 0,137 0,149 0,149
2
1,5 x D 0,5 x D 1 x D 40 – 56 fz 0,048 0,065 0,076 0,084 0,095 0,105 0,121 0,137 0,137
N1
1,5 x D 0,5 x D 1 x D 240 – 300 fz 0,079 0,104 0,125 0,144 0,168 0,192 0,240 0,300 0,300
2
1,5 x D 0,5 x D 1 x D 184 – 240 fz 0,063 0,083 0,100 0,115 0,134 0,154 0,192 0,240 0,240
S
1
1,5 x D 0,5 x D 1 x D 12 – 24 fz 0,048 0,065 0,076 0,084 0,095 0,105 0,121 0,137 0,137
2
1,5 x D 0,5 x D 1 x D 4 – 12 fz 0,026 0,034 0,040 0,045 0,050 0,056 0,065 0,074 0,074
3
1,5 x D 0,5 x D 1 x D 12 – 22 fz 0,039 0,052 0,061 0,067 0,076 0,084 0,097 0,109 0,109
4
1,5 x D 0,5 x D 0,5 x D 12 – 22 fz 0,034 0,048 0,056 0,062 0,070 0,077 0,089 0,100 0,100
NOTE: Lower value of cutting speed is used for high stock removal applications or for higher hardness (machinability) within group.
Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group.
Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on diameters >12mm.
WID_Master16_SolidEndMilling_HSS-E-PM_Q012_Q013_Metric_REBRAND.indd 13 10/30/15 2:31 PM
LViWID M 16 S lidE dMilli B R000 R001 M i REBRANDO b 20 20154 26PMLViWID M 16 S lidE dMilli B R000 R001 M i REBRANDO b 20 20154 26PM
WID_Master16_SolidEndMilling_Burs_R000_R001_Metric_REBRAND.indd 2 10/30/15 2:31 PM
LViWID M 16 S lidE dMilli B R000 R001 M i REBRANDO b 20 20154 26PM
widia.com R1
LViWID M 16 S lidE dMilli B R000 R001 M i REBRANDO b 20 20154 26PM
Burs ..................................................................................................................................................................... R2–R18
Solid End Milling • Burs
WID_Master16_SolidEndMilling_Burs_R000_R001_Metric_REBRAND.indd 3 10/30/15 2:31 PM
LViWID M 16 S lidE dMilli B R002 R003 M i REBRANDN b 12 20159 48AM
R2 widia.com
Micrograin carbide
Consistent performance
and tool life.
High-quality steel shanks
Multiple lengths and styles.
USCTI Standards
Industry-standard
shapes and sizes.
High-quality brazing and testing
Ensures safety at high RPMs.
WIDIA™ carbide burs are manufactured in compliance with USCTI standards and
are the highest quality in the industry, delivering excellent performance and safety.
Our unique manufacturing process ensures exceptional tool life with the reliability to
operate safely at high speeds. WIDIA burs offer a comprehensive portfolio of sizes
and shapes for all applications and workpiece materials.
• Complete selection of shapes and cut styles for all materials and applications.
• Solid shank and brazed-on steel styles.
• Highest quality materials and construction deliver exceptional tool life.
• Wide array of sizes and shank lengths.
• Available in multiple size and style kits.
• Use of industry-standard USCTI codes for easy identifi cation.
Carbide Burs
WIDIA™ Metal Removal Carbide Burs
WID_Master16_SolidEndMilling_Burs_R002_R003_Metric_REBRAND.indd 2 11/12/15 9:59 AM
LViWID M 16 S lidE dMilli B R002 R003 M i REBRANDN b 12 20159 48AM
R3
widia.com
How to select a Bur
Applications Material Cut
Effi cient stock removal — deburring,
fi nishing, and cleaning.
Ferrous metals
Non-ferrous metals Double Master Cut
Heavy stock removal — deburring, milling,
cleaning, and machining.
Non-ferrous metal: aluminium alloys
Plastics Aluminium Cut
Medium stock removal — deburring,
milling, cleaning, and fi nishing.
Non-ferrous metal: aluminium alloys
Plastics
Hard rubber
Coarse Cut
Special Cut Style
Medium stock removal — deburring,
milling, cleaning, and fi nishing.
Non-Hardened steel >45 HRC
Hardened steel >45 HRC: stainless steel
High-temperature resistant metals: nickel, cobalt, titanium
Non-ferrous light metals: brass, copper, and zinc
Hardened >45 HRC: cast iron
Single Cut
Light stock removal — fi ne deburring
and fi ne fi nishing. Hardened steel >45 HRC Fine Cut
Special Cut Style
Standard Cut Styles Special Cut Styles
Standard Cut (Right-Hand Spiral) Coarse Cut
The WIDIA™ standard (right-hand spiral) cut
produces a smooth fi nish for general-purpose
use on steel, cast iron, and other ferrous and
non-ferrous materials.
Most WIDIA carbide burs are available in the
right-hand spiral design.
Coarse cut burs are favored for applications in softer
materials such as brass, lead, annealed low-carbon steels,
and some aluminium alloys. The combination of fewer fl utes
with greater depths provides the chip clearance necessary
for these materials.
Available as specials.
Master Cut (Double Cut) Fine Cut RHS
The WIDIA exclusive master cut, with its chisel-type cutting
edge, is a machine-ground tool built to exacting tolerances
of concentricity, size, and shape. This accuracy, when
combined with precision grinders, results in smooth-running,
fast metal removal, and fi ne fi nishes. The right- and left-hand
helical fl utes combine to produce a chisel-type cutting tooth.
This results in faster penetration and stock removal with
minimal bounce or chatter.
The master cut design also produces an easy-to-handle
granular-type chip in most metals, as opposed to the
conventional sliver-type chips.
Throughout its life, the master cut gives faster stock removal
and less operator fatigue, and maintains a good fi nish on the
widest possible variety of workpiece materials.
The WIDIA fi ne cut right-hand spiral is used in applications
where stock removal is light and workpiece fi nish is critical.
A greater number of fl utes reduces chip load and provides
excellent control in deburring small, intricate areas.
Available as specials.
Aluminium Cut
The WIDIA aluminium cut burs are outstanding
on soft or non-ferrous type materials. Use the
aluminium cut design on aluminium, magnesium,
brass, lead, and most plastics.
WID_Master16_SolidEndMilling_Burs_R002_R003_Metric_REBRAND.indd 3 11/12/15 9:59 AM
LViWID M 16 S lidE dMilli B R004 R005 M i REBRANDN b 12 20159 49AM
R4 widia.com
Bur Shapes
A Shape B Shape C Shape
K Shape
D Shape
L Shape
E Shape
M Shape
F Shape
G Shape H Shape
WID_Master16_SolidEndMilling_Burs_R004_R005_Metric_REBRAND.indd 4 11/12/15 9:59 AM
LViWID M 16 S lidE dMilli B R004 R005 M i REBRANDN b 12 20159 49AM
R5
widia.com
Shank Styles
A Shank
3mm solid carbide shank
B Shank
3mm hardened steel shank
C Shank
6mm hardened steel shank
D Shank
3mm solid carbide shank
Bur Cutting Speeds
Bur Diameter Recommended Cutting Speed (RPM) Maximum Cutting Speed (RPM)
1,6mm 60,000–90,000 100,000
3,0mm 40,000–70,000 90,000
4,8mm 35,000–60,000 80,000
6,4mm 30,000–50,000 70,000
8,0mm 20,000–40,000
68,000
9,5mm 20,000–40,000
66,000
11,1mm 15,000–40,000
58,000
12,7mm 15,000–40,000
50,000
15,9mm 12,000–25,000
40,000
19,1mm
10,000–20,000
33,000
25,4mm 7,500–20,000
25,000
28,8mm 7,000–13,000
20,000
38,1mm 5,000–10,000
17,000
44,5mm 4,500–9,000
14,000
50,8mm 4,000–8,000
12,500
WID_Master16_SolidEndMilling_Burs_R004_R005_Metric_REBRAND.indd 5 11/12/15 9:59 AM
LViWID M 16 S lidE dMilli B R006 R007 M i REBRANDO b 20 20154 25PM
R6 widia.com
Burs
Series SA-M Cylindrical
Series SA-M Cylindrical
Burs
• Cylindrical shape.
• No end cut.
• Shank styles A, B, and C — see page R5
for shank style denitions.
USCTI Number
Single Cut
order # catalogue #
Master Cut
order # catalogue #
Aluminium Cut
order # catalogue # D1 D Ap1 max
length
L shank style
SA-41M 3009447 M40222 1598896 M41222 – 1,6 3,0 4,8 38,1 A
SA-42M 3009448 M40223 1293458 M41223 – 2,4 3,0 11,1 38,1 A
SA-43M 2736521 M40224 2270852 M41224 – 3,0 3,0 14,3 31,8 A
SA-11M – 2991270 M41225 – 3,1 6,0 12,7 50,8 C
SA-52M – 1977421 M41226 – 4,0 3,0 12,7 38,1 A
SA-53M 2961525 M40227 2949031 M41227 – 4,8 3,0 12,7 38,1 A
SA-14M 2736516 M40228 1293727 M41228 – 4,8 6,0 15,9 50,8 C
SA-1M 2736509 M40229 1977519 M41229 2987350 M40551 6,0 6,0 15,9 50,8 C
SA-51M 2736505 M40230 – – 6,4 3,0 4,8 36,5 B
SA-51M-2 – 1977415 M41231 – 6,4 3,0 12,7 44,5 B
SA-2M 2991245 M40232 2735696 M41232 – 7,9 6,0 19,1 63,5 C
SA-3M 2736500 M40233 1293733 M41233 2736260 M40552 9,5 6,0 19,1 63,5 C
SA-4M – 2979468 M41235 – 11,1 6,0 25,4 69,9 C
SA-5M 2990411 M40237 2219983 M41237 2736256 M40553 12,7 6,0 25,4 69,9 C
SA-6M 2736488 M40239 2987343 M41239 2991264 M40555 15,9 6,0 25,4 69,9 C
SA-16M – 2735681 M41241 – 19,1 6,0 19,1 69,9 C
SA-7M 3009451 M40242 – – 19,1 6,0 25,4 69,9 C
SA-9M – 3009494 M41245 – 25,4 6,0 25,4 69,9 C
Single Cut
Master Cut
Aluminium Cut
WID_Master16_SolidEndMilling_Burs_R006_R007_Metric_REBRAND.indd 6 10/30/15 2:31 PM
LViWID M 16 S lidE dMilli B R006 R007 M i REBRANDO b 20 20154 25PM
R7
widia.com
Burs
Series SB-M Cylindrical with End Cut
Series SB-M Cylindrical with End Cut
• Cylindrical shape.
• With end cut.
• Shank styles A, B, and C — see page R5
for shank style denitions.
Burs
USCTI Number
Single Cut
order # catalogue #
Master Cut
order # catalogue # D1 D Ap1 max
length
L shank style
SB-41M – 2894606 M41261 1,6 3,0 6,4 38,1 A
SB-42M – 2991812 M41262 2,4 3,0 11,1 38,1 A
SB-43M 3009453 M40263 2220466 M41263 3,0 3,0 14,3 38,1 A
SB-52M – 2991813 M41265 4,0 3,0 12,7 38,1 A
SB-53M – 3009496 M41266 4,8 3,0 12,7 38,1 A
SB-14M 3009454 M40267 – 4,8 6,0 15,9 50,8 C
SB-1M 2986664 M40268 2987342 M41268 6,0 6,0 15,9 50,8 C
SB-51M – 2987341 M41269 6,4 3,0 4,8 36,5 B
SB-51M-2 – 2987340 M41270 6,4 3,0 6,4 44,5 B
SB-2M 2981749 M40271 2987339 M41271 7,9 6,0 19,1 63,5 C
SB-3M 2979470 M40272 2987338 M41272 9,5 6,0 19,1 63,5 C
SB-5M 2736421 M40274 2987337 M41274 12,7 6,0 25,4 69,9 C
SB-5M-2 – 3324689 M41275 12,7 8,0 25,4 76,2 C
SB-6M – 2991272 M41276 15,9 6,0 25,4 69,9 C
SB-6M-2 – 3324690 M41277 15,9 8,0 25,4 76,2 C
SB-9M 2736416 M40282 – 25,4 6,0 25,4 69,9 C
Single Cut
Master Cut
WID_Master16_SolidEndMilling_Burs_R006_R007_Metric_REBRAND.indd 7 10/30/15 2:31 PM
LViWID M 16 S lidE dMilli B R008 R009 M i REBRANDO b 20 20154 25PM
R8 widia.com
Burs
Series SC-M Cylindrical Ball Nose
Series SC-M Cylindrical Ball Nose
Burs
• Cylindrical shape.
• Ball nose end cut.
• Shank styles A, B, and C — see page R5
for shank style denitions.
USCTI Number
Single Cut
order # catalogue #
Master Cut
order # catalogue #
Aluminium Cut
order # catalogue # D1 D Ap1 max
length
L shank style
SC-41M 2991248 M40303 2990415 M41303 – 2,4 3,0 11,1 38,1 A
SC-42M 2736319 M40304 1977373 M41304 – 3,0 3,0 14,3 38,1 A
SC-52M – 2735503 M41306 – 4,0 3,0 12,7 38,1 A
SC-53M – 2894604 M41307 – 4,8 3,0 12,7 38,1 A
SC-14M – 2991273 M41308 – 4,8 6,0 15,9 50,8 C
SC-1M 2730690 M40309 1977546 M41309 2730007 M40559 6,0 6,0 15,9 50,8 C
SC-51M 2991249 M40310 2894603 M41310 – 6,4 3,0 12,7 44,5 B
SC-2M – 2729973 M41311 – 7,9 6,0 19,1 63,5 C
SC-3M – 1977548 M41312 2730002 M40560 9,5 6,0 19,1 63,5 C
SC-4M – 2987336 M41314 – 11,1 6,0 25,4 69,9 C
SC-5M 2736314 M40316 1977549 M41316 2987349 M40561 12,7 6,0 25,4 69,9 C
SC-5M-2 – 3009499 M41317 – 12,7 8,0 25,4 76,2 C
SC-6M – 2991274 M41318 – 15,9 6,0 25,4 69,9 C
SC-6M-2 – 3005591 M41319 – 15,9 8,0 25,4 76,2 C
SC-7M – 2991275 M41320 – 19,1 6,0 25,4 69,9 C
Single Cut
Master Cut
Aluminium Cut
WID_Master16_SolidEndMilling_Burs_R008_R009_Metric_REBRAND.indd 8 10/30/15 2:31 PM
LViWID M 16 S lidE dMilli B R008 R009 M i REBRANDO b 20 20154 25PM
R9
widia.com
Burs
Burs
Series SD-M BALL
Series SD-M BALL
• Ball shape.
• Shank styles A, B, and C — see page R5
for shank style denitions.
USCTI Number
Single Cut
order # catalogue #
Master Cut
order # catalogue #
Aluminium Cut
order # catalogue # D1 D Ap1 max
length
L shank style
SD-40M 1293470 M40342 – – 1,6 3,0 1,6 38,1 A
SD-41M 2656784 M40343 2729868 M41343 – 2,4 3,0 2,4 38,1 A
SD-42M 2730572 M40344 2729863 M41344 – 3,0 3,0 3,0 38,1 A
SD-53M – 2973335 M41345 – 4,8 3,0 4,8 38,1 A
SD-14M 3009458 M40346 2987335 M41346 – 4,8 6,0 4,8 50,8 C
SD-1M 2730567 M40347 2729860 M41347 3009484 M40567 6,0 6,0 6,0 50,8 C
SD-51M – 2729855 M41348 – 6,4 3,0 6,4 38,1 B
SD-2M 2991252 M40349 2987334 M41349 – 7,9 6,0 7,9 51,6 C
SD-3M – 2991276 M41350 2991265 M40568 9,5 6,0 9,5 52,8 C
SD-4M – 2990416 M41351 – 11,1 6,0 11,1 54,4 C
SD-5M 2991254 M40352 2729850 M41352 – 12,7 6,0 12,7 56,0 C
SD-5M-2 3324657 M40353 – – 12,7 8,0 12,7 62,3 C
SD-6M 2991255 M40354 3009500 M41354 – 15,9 6,0 15,9 58,7 C
SD-6M-2 – – 2991266 M40572 15,9 8,0 15,9 65,1 C
SD-7M – 2729840 M41356 – 19,1 6,0 19,1 61,9 C
Single Cut
Master Cut
Aluminium Cut
WID_Master16_SolidEndMilling_Burs_R008_R009_Metric_REBRAND.indd 9 10/30/15 2:31 PM
LViWID M 16 S lidE dMilli B R010 R011 M i REBRANDO b 20 20154 25PM
R10 widia.com
Burs
Series SE-M EGG
Series SE-M EGG
Burs
• Egg shape.
• Shank styles A, B, and C — see page R5
for shank style denitions.
USCTI Number
Single Cut
order # catalogue #
Master Cut
order # catalogue #
Aluminium Cut
order # catalogue # D1 D Ap1 max
length
L shank style
SE-41M 2991803 M40368 2729793 M41368 – 3,0 3,0 5,6 38,1 A
SE-53M – 2991815 M41369 – 4,8 3,0 7,1 38,1 A
SE-1M – 2969583 M41372 – 6,0 6,0 9,5 50,8 C
SE-51M 2991256 M40370 2987333 M41370 – 6,4 3,0 9,5 41,3 B
SE-3M – 2991277 M41371 – 9,5 6,0 15,9 60,3 C
SE-5M 2730515 M40373 1977570 M41373 2987348 M40574 12,7 6,0 22,2 66,7 C
SE-5M-2 – 3324697 M41374 – 12,7 8,0 25,4 76,2 C
SE-6M – 2991278 M41375 – 15,9 6,0 25,4 69,9 C
SE-7M – 2991816 M41377 – 19,1 6,0 25,4 69,9 C
Single Cut
Master Cut
Aluminium Cut
WID_Master16_SolidEndMilling_Burs_R010_R011_Metric_REBRAND.indd 10 10/30/15 2:31 PM
LViWID M 16 S lidE dMilli B R010 R011 M i REBRANDO b 20 20154 25PM
R11
widia.com
Burs
Series SF-M Round Nose Tree
Series SF-M Round Nose Tree
Burs
• Round nose tree shape.
• Shank styles A, B, and C — see page R5
for shank style denitions.
USCTI Number
Single Cut
order # catalogue #
Master Cut
order # catalogue #
Aluminium Cut
order # catalogue # D1 D Ap1 max
length
L shank style
SF-41M – 3009502 M41395 – 3,0 3,0 3,4 38,1 A
SF-42M 2987354 M40396 1977374 M41396 – 3,0 3,0 12,7 38,1 A
SF-53M – 2729701 M41397 – 4,8 3,0 12,7 38,1 B
SF-1M 2730426 M40398 2987331 M41398 3009487 M40576 6,0 6,0 15,9 50,8 C
SF-51M 2730421 M40399 1977417 M41399 – 6,4 3,0 12,7 44,5 A
SF-3M 2730416 M40400 3526093 M41400 – 9,5 6,0 19,1 63,5 C
SF-4M – 1977555 M41401 – 11,1 6,0 25,4 69,9 C
SF-13M – 1293748 M41402 – 12,7 6,0 19,1 63,5 C
SF-5M 2526554 M40403 1977556 M41403 1977630 M40578 12,7 6,0 25,4 69,9 C
SF-5M-2 – 3009503 M41405 – 12,7 8,0 25,4 76,2 C
SF-6M 3009463 M40406 2202572 M41406 – 15,9 6,0 25,4 69,9 C
Single Cut
Master Cut
Aluminium Cut
WID_Master16_SolidEndMilling_Burs_R010_R011_Metric_REBRAND.indd 11 10/30/15 2:31 PM
LViWID M 16 S lidE dMilli B R012 R013 M i REBRANDO b 20 20154 28PM
R12 widia.com
Burs
Series SG-M Pointed Tree
Series SG-M Pointed Tree
Burs
• Pointed tree shape.
• Shank styles A, B, and C — see page R5
for shank style denitions.
USCTI Number
Single Cut
order # catalogue #
Master Cut
order # catalogue # D1 D Ap1 max
length
L shank style
SG-41M-2 2991258 M40428 – 3,0 3,0 6,4 38,1 C
SG-41M-2 – 1293463 M41428 3,0 3,0 6,4 38,1 A
SG-43M 2730335 M40430 – 3,0 3,0 9,5 38,1 C
SG-44M 3009465 M40431 – 3,0 3,0 12,7 38,1 C
SG-44M – 1534016 M41431 3,0 3,0 12,7 38,1 A
SG-53M – 2894601 M41432 4,8 3,0 12,7 38,1 A
SG-1M – 2987329 M41433 6,0 6,0 15,9 50,8 C
SG-51M 2991261 M40434 – 6,4 3,0 12,7 69,9 C
SG-51M – 1293476 M41434 6,4 3,0 12,7 69,9 B
SG-2M – 2987327 M41435 7,9 6,0 19,1 63,5 C
SG-3M 2981799 M40436 2987326 M41436 9,5 6,0 19,1 63,5 C
SG-5M – 2729591 M41439 12,7 6,0 25,4 69,9 C
SG-5M-2 – 3324707 M41442 12,7 8,0 25,4 76,2 C
Single Cut
Master Cut
WID_Master16_SolidEndMilling_Burs_R012_R013_Metric_REBRAND.indd 12 10/30/15 2:31 PM
LViWID M 16 S lidE dMilli B R012 R013 M i REBRANDO b 20 20154 28PM
R13
widia.com
Burs
Series SH-M Flame
Series SH-M Flame
Burs
• Flame shape.
• Shank styles A and C — see page R5
for shank style denitions.
USCTI Number
Single Cut
order # catalogue #
Master Cut
order # catalogue # D1 D Ap1 max
length
L shank style
SH-41M 2991807 M40452 1977378 M41452 3,0 3,0 6,4 38,1 A
SH-53M – 1977429 M41453 4,8 3,0 9,5 38,1 A
SH-2M 3009471 M40454 2991284 M41454 7,9 6,0 19,1 63,5 C
SH-5M 2987353 M40455 2987323 M41455 12,7 6,0 31,8 76,2 C
SH-6M – 2987322 M41457 15,9 6,0 36,5 81,0 C
Single Cut
Master Cut
WID_Master16_SolidEndMilling_Burs_R012_R013_Metric_REBRAND.indd 13 10/30/15 2:31 PM
LViWID M 16 S lidE dMilli B R014 R015 M i REBRANDO b 20 20154 28PM
R14 widia.com
Burs
Series SL-M Included Angle
Series SL-M Included Angle
Burs
• Included angle shape.
• Shank styles A and C — see page R5
for shank style denitions.
USCTI Number
Single Cut
order # catalogue #
Master Cut
order # catalogue #
Aluminium Cut
order # catalogue # D1 D Ap1 max
length
L shank style KRA
SL-41M – 2729483 M41473 – 3,0 3,0 9,5 38,1 A 8
SL-42M 2730232 M40474 1977385 M41474 – 3,0 3,0 12,7 38,1 A 8
SL-53M 2730227 M40475 – – 4,8 3,0 12,7 38,1 A 14
SL-1M – 2729472 M41476 – 6,0 6,0 15,9 50,8 C 14
SL-2M 2991809 M40477 1977572 M41477 – 7,9 6,0 22,2 69,9 C 14
SL-3M 3009475 M40478 1977573 M41478 2978948 M40582 9,5 6,0 27,0 74,6 C 14
SL-4M 2730217 M40479 1293770 M41479 2729982 M40584 12,7 6,0 31,8 76,2 C 14
SL-4M-2 – 2729457 M41480 – 12,7 8,0 31,8 82,6 C 14
SL-6M – – 2991268 M40585 15,9 6,0 33,3 81,0 C 14
Single Cut
Master Cut
Aluminium Cut
WID_Master16_SolidEndMilling_Burs_R014_R015_Metric_REBRAND.indd 14 10/30/15 2:32 PM
LViWID M 16 S lidE dMilli B R014 R015 M i REBRANDO b 20 20154 28PM
R15
widia.com
Burs
Series SM-M Pointed Cone
Series SM-M Pointed Cone
Burs
• Pointed cone shape.
• Shank styles A, B, and C — see page R5
for shank style denitions.
USCTI Number
Single Cut
order # catalogue #
Master Cut
order # catalogue # D1 D Ap1 max
length
L shank style KRA
SM-41M 2730149 M40496 2990417 M41496 3,0 3,0 9,5 38,1 A 12
SM-42M 2987352 M40497 1977382 M41497 3,0 3,0 11,1 38,1 A 14
SM-43M 2990413 M40498 1293468 M41498 3,0 3,0 15,9 38,1 A 7
SM-2M – 1977564 M41501 6,0 6,0 19,1 50,8 C 14
SM-3M – 2990418 M41502 6,0 6,0 25,4 50,8 C 10
SM-51M 2730139 M40503 1977419 M41503 6,4 3,0 12,7 47,6 B 22
SM-4M – 2872844 M41504 9,5 6,0 15,9 63,5 C 28
SM-5M – 1977567 M41505 12,7 6,0 22,2 69,9 C 28
_ = KRA
Single Cut
Master Cut
WID_Master16_SolidEndMilling_Burs_R014_R015_Metric_REBRAND.indd 15 10/30/15 2:32 PM
LViWID M 16 S lidE dMilli B R016 R017 M i REBRANDN b 12 20159 50AM
R16 widia.com
Burs
Series SN-M Inverted Taper
Series SN-M Inverted Taper
Burs
• Inverted taper shape.
• Shank styles A and C — see page R5
for shank style denitions.
USCTI Number
Single Cut
order # catalogue #
Master Cut
order # catalogue # D1 D Ap1 max
length
L shank style KRA
SN-42M 3009478 M40516 3139827 M41516 3,0 3,0 4,8 38,1 A 10
SN-1M – 2991818 M41519 6,0 6,0 7,9 50,8 C 10
SN-51M – 2894600 M41518 6,4 3,0 6,4 38,1 A 10
SN-4M 3019444 M40521 – 12,7 6,0 12,7 57,2 C 28
SN-7M – 3009511 M41525 19,1 6,0 15,9 60,3 C 30
_ = KRA
Single Cut
Master Cut
WID_Master16_SolidEndMilling_Burs_R016_R017_Metric_REBRAND.indd 16 11/12/15 9:59 AM
LViWID M 16 S lidE dMilli B R016 R017 M i REBRANDN b 12 20159 50AM
R17
widia.com
Burs
Series IGT Internal Grinding Tool
Series IGT Internal Grinding Tool
Burs
• Fine master-cut style.
• Cylindrical shape.
• Series IGT has no end cut.
• Series IGT-EC has end cut.
• Solid carbide construction.
Master Cut
order # catalogue # D1 D Ap1 max
length
L
2735469 M42006 1,6 3,2 3,2 38,1
2735464 M42007 2,0 3,2 4,0 38,1
2735459 M42008 2,4 3,2 4,0 38,1
2735454 M42009 2,8 3,2 4,8 38,1
2735449 M42010 3,2 3,2 4,8 38,1
2735411 M42019 3,6 4,8 5,6 50,8
2735406 M42020 4,0 4,8 5,6 50,8
2735401 M42021 4,4 4,8 6,4 50,8
2735396 M42022 4,8 4,8 6,4 50,8
2735443 M42012 5,6 6,4 7,1 50,8
2735439 M42013 6,0 6,4 7,9 50,8
2735432 M42014 6,4 6,4 7,9 50,8
2735427 M42015 7,1 6,4 8,7 63,5
2735423 M42016 7,9 6,4 8,7 63,5
2735417 M42018 9,5 6,4 9,5 63,5
Master Cut
Series IGT-EC Internal Grinding Tool
Master Cut
order # catalogue # D1 D Ap1 max
length
L
2735391 M42023 1,6 3,2 3,2 38,1
2735386 M42024 2,0 3,2 4,0 38,1
2735381 M42025 2,4 3,2 4,0 38,1
2735376 M42026 2,8 3,2 4,8 38,1
2735371 M42027 3,2 3,2 4,8 38,1
2735326 M42036 3,6 4,8 5,6 50,8
2735320 M42037 4,0 4,8 5,6 50,8
2735316 M42038 4,4 4,8 6,4 50,8
2735310 M42039 4,8 4,8 6,4 50,8
2735366 M42028 5,2 6,4 7,1 50,8
2735361 M42029 5,6 6,4 7,1 50,8
2735357 M42030 6,0 6,4 7,9 50,8
2735352 M42031 6,4 6,4 7,9 50,8
2735346 M42032 7,1 6,4 8,7 63,5
2735341 M42033 7,9 6,4 8,7 63,5
2735336 M42034 8,7 6,4 9,5 63,5
2735331 M42035 9,5 6,4 9,5 63,5
Series IGT-EC Internal Grinding Tool
Master Cut
WID_Master16_SolidEndMilling_Burs_R016_R017_Metric_REBRAND.indd 17 11/12/15 9:59 AM
LViWID M 16 S lidE dMilli B R018 R019 M i REBRANDN b 10 20151 36PM
R18 widia.com
Burs
Series Bur Sets
Series Bur Sets
order number catalogue number D1 D quantity
shank
style
cut
style includes
2736241 M40589 3,0 3 9 A Master SA-42M, SA-43M, SC-41M, SC-42M, SD-42M, SE-41M, SF-42M, SG-42M, SM-43M
2987345 M40590 3,0 3 9 B Master SA-42M, SA-43M, SC-41M, SC-42M, SD-42M, SE-41M, SF-42M, SG-42M, SM-43M
2736231 M40592 6,0 3 9 B Master SA-51M, SB-51M, SC-51M, SD-51M, SE-51M, SF-51M, SG-51M, SM-51M, SN-51M
3009488 M40595 6,0 6 8 C Master SA-1M, SC-1M, SD-1M, SE-1M, SF-1M, SG-1M, SL-1M, SM-2M
2736217 M40596 9,5 6 8 C Standard SA-3M, SC-3M, SD-3M, SE-3M, SF-3M, SG-3M, SL-3M, SM-4M
2736212 M40597 9,5 6 8 C Master SA-3M, SC-3M, SD-3M, SE-3M, SF-3M, SG-3M, SL-3M, SM-4M
2736206 M40598 12,0 6 8 C Master SA-5M, SC-5M, SD-5M, SE-5M, SF-5M, SG-5M, SL-4M, SM-5M
Burs
• Shank styles A, B, and C — see page R5
for shank style denitions.
• Assortment of bur styles for multiple applications.
• Most popular metric sizes.
WID_Master16_SolidEndMilling_Burs_R018_R019_Metric_REBRAND.indd 18 11/10/15 2:19 PM
LViWID M 16 S lidE dMilli B R018 R019 M i REBRANDN b 10 20151 36PM
We pay cash for used carbide tooling, including coated or non-coated carbide inserts,
drills, end mills, reamers, and taps, regardless of brand.
It’s good for the environment and a responsible way to dispose of scrap carbide.
Our carbide recycling program features:
• Easy-to-use web portal that shows what your scrap carbide is worth before sending it to us.
• Online forms that make it easy to ship scrap carbide to WIDIA.
• Green Box™ containers for safe, convenient shipping of scrap carbide to WIDIA.
• Cash payment for used carbide tooling.
Carbide Recycling
Good for You, Better for the Environment!
The WIDIA Carbide Recycling Program can turn accumulated
scrap carbide tooling in your shop into cash.
For more information, contact your local WIDIA
Authorised Distributor or visit widia.com/services.
WID_Master16_SolidEndMilling_Burs_R018_R019_Metric_REBRAND.indd 19 11/10/15 2:19 PM
LViWID M 16 H l ki S i I S000 S001 M i REBRANDN b 23 20157 06AM
WID_Master16_Holemaking_SectionIntro_S000_S001_Metric_REBRAND.indd 1 11/23/15 7:07 AM
S1
LViWID M 16 H l ki S i I S000 S001 M i REBRANDN b 2320157 06AM
widia.com
Holemaking
Holemaking Introduction .....................................................................................................................................S2–S8
Solid Carbide Drills ........................................................................................................................................... T1–T149
Modular Drills ..................................................................................................................................................... U1–U45
Indexable Drills ................................................................................................................................................... V1–V40
Hole Finishing ...................................................................................................................................................W1–W81
WID_Master16_Holemaking_SectionIntro_S000_S001_Metric_REBRAND.indd 1 11/23/15 7:07 AM
S2
LViWID M 16 H l ki S i I S002 S003 M i REBRANDN b 12 20159 12AM
widia.com
• TOP DRILL M1™
• Spade Blades
From sturdy, general-purpose solid carbide drills to high-precision fi ne boring systems, we offer the most comprehensive
line of holemaking products available on the market today. If you need unmatched performance and reliability, look no
further than our wide range of solid carbide, modular, and indexable drills, and hole fi nishing products.
Modular Drills
• VariDrill™
• TOP DRILL S™ for Steel
• TOP DRILL S™ for Cast Iron
• TOP DRILL S+™
• TOP DRILL S+ 12 x D
• TOP DRILL Deep-Hole Drill
• TOP DRILL G™
Solid Carbide Drills
Holemaking Made Easy and Economical
HOLEMAKING PRODUCTS
WID_Master16_Holemaking_SectionIntro_S002_S003_Metric_REBRAND.indd 2 11/12/15 12:01 PM
S3
LViWID M 16 H l ki S i I S002 S003 M i REBRANDN b 1220159 12AM
widia.com
• Top Cut 4™ • Reaming Tools
• ROTAFLEX™ Boring System
• Countersinking Tools
Hole Finishing Indexable Drills
WID_Master16_Holemaking_SectionIntro_S002_S003_Metric_REBRAND.indd 3 11/12/15 12:01 PM
S4
LViWID M 16 H l ki S i I S004 S005 M i REBRANDN b 12 20159 17AM
widia.com
Choosing the Correct Production
Holemaking
Choosing the Correct Production
Holemaking
Select the Correct Holemaking Product Platform for Your Application
Added Value for Your Performance
Increase of Productivity and Effi ciency Control of Total Tooling Costs
• Material and application-speci c solutions.
• Maximum metal removal rates and repeatability.
• Standardised design platforms for special tools based
on “proven solutions” for individual optimisations and
combination tools.
• High tool utilisation through material and application-
speci c solutions.
• Process-safe regrinding service.
• Reduction of stocks through ef cient modular concepts.
• Multiple platforms per application to achieve the most
cost-ef cient solution.
Solid Drilling
hourly rate low (rough) normal (M/C) high (fi ne)
hole quality IT11 IT10 IT9 IT8 IT7 IT6
diameter
3mm (0.118")
6mm (0.236")
9mm (0.354")
12mm (0.472")
15mm (0.591")
18mm (0.709")
21mm (0.827")
24mm (0.945")
27mm (1.063")
30mm (1.181")
33mm (1.299")
36mm (1.417")
39mm (1.535")
42mm (1.654")
45mm (1.772")
58mm (2.283")
51mm (2.008")
54mm (2.126")
57mm (2.244")
60mm (2.362")
110mm (4.331")
• Broad selection of holemaking tools.
• Integrated into a full range of cutting tools
and service offers.
• Onsite service for an ef cient development and
implementation of machining solutions.
Optimised Purchase
Solid Carbide Drills
1–25mm
WIDIA™ Spade Blades
9,2–101,6mm
Top Drill M1™
7,94–27,99mm
Top Cut 4™
12–68mm
WID_Master16_Holemaking_SectionIntro_S004_S005_Metric_REBRAND.indd 4 11/12/15 12:01 PM
S5
LViWID M 16 H l ki S i I S004 S005 M i REBRANDN b 1220159 17AM
widia.com
Choosing the Correct Production
Holemaking
Hole Finishing
hourly rate low (rough) normal (M/C) high (fi ne)
hole quality IT11 IT10 IT9 IT8 IT7 IT6
diameter
3mm (0.118")
10mm (0.394")
20mm (0.787")
30mm (1.181")
40mm (1.575")
50mm (1.969")
60mm (2.362")
70mm (2.756")
80mm (3.150")
90mm (3.543")
100mm (3.937")
110mm (4.331")
120mm (4.724")
130mm (5.118")
140mm (5.512")
150mm (5.906")
160mm (6.299")
170mm (6.693")
180mm (7.087")
190mm (7.480")
200mm (7.874")
210mm (8.268")
510mm (20.079")
520mm (20.472")
HSR™ SC-Reaming*
HSR-Tipped
Reamer*
Choosing the Correct Production
Holemaking
*IT6 is possible above 10mm (0.394") for both HSR SC-Reaming and HSR-Tipped Reamer in custom solutions.
Select the Correct Holemaking Product Platform for Your Application
ROTAFLEX
Bridge Tools: Finishing
(3.425–7.953")
Solid Carbide Drills
Modular Drills
Indexable Drills
Precision Hole Finishing
Reaming
Determine the hole quality and diameter to show the available options and
then decide the platform that will best fulfi ll your requirements.
ROTAFLEX TCHS
Rough Boring Twin Cutter
(up to 4.528")
ROTAFLEX
Bridge Tools: Roughing
(3.425–7.953")
ROTAFLEX
Bridge Tools: Roughing
(7.874–20.472")
ROTAFLEX™ FBHBB
Fine Boring Heads with Boring Bars
ROTAFLEX FBH
Fine Boring Heads with Insert Holders
(up to 4.528")
ROTAFLEX
Bridge Tools: Finishing
(7.874–20.472")
WID_Master16_Holemaking_SectionIntro_S004_S005_Metric_REBRAND.indd 5 11/12/15 12:01 PM
S6
LViWID M 16 H l ki S i I S006 S007 M i REBRANDN b 12 20159 18AM
widia.com
Grade
Coatings provide high-speed
capability and are engineered
for fi nishing to heavy roughing.
WK15PD
Composition: With a newly developed unique multilayered PVD AlCrN coating and
a high-quality submicron carbide substrate, this grade gives the highest level of wear
resistance at high cutting speeds.
Application: This grade offers extraordinary wear resistance in drilling of cast iron
materials. With its high hot hardness it allows for high speed machining.
K
WU20PD
Composition: With a multilayered PVD TiN-TiAlN coating, a high-quality submicron
carbide substrate and a state-of-the-art surface condition, this grade gives the highest
level of wear resistance at high cutting speeds.
Application: First choice for alloyed and high-alloyed steels and cast irons. A state-of-
the-art surface condition enables superior chip evacuation even when MQL is applied.
P
K
WN10HD
Composition: This uncoated ne grain carbide with high hardness offers excellent
abrasive wear resistance.
Application: First choice for precision drilling of non-ferrous materials.
K
N
Solid Carbide Drills
Grades and Grade Descriptions
P
Steel
M
Stainless Steel
K
Cast Iron
N
Non-Ferrous
S
High-Temp Alloys
H
Hardened Materials
WP20PD
Composition: With a multilayered PVD TiN-TiAlN coating, a high-quality submicron
carbide substrate and a state-of-the-art surface condition, this grade gives the highest
level of wear resistance at high cutting speeds.
Application: A high productivity grade for high speeds and feeds. First choice for high
productivity with excellent reliability in alloyed and high-alloyed steels and cast irons.
P
K
WU25PD
Composition: With a multilayered PVD TiN-TiAlN coating and a high-quality submicron
carbide substrate, this grade gives a high level of wear resistance at medium to high
cutting speeds.
Application: First choice for high reliability in all materials. This grade should be used
at medium to high speeds and feeds. It is a general purpose grade that performs very
well for alloyed and high-alloy steel and cast iron, but can also be used with excellent
performance in all other material groups.
P
M
K
N
S
H
wear
resistance toughness
Coating Grade Description
05 10 15 20 25 30 35 40 45
WID_Master16_Holemaking_SectionIntro_S006_S007_Metric_REBRAND.indd 6 11/12/15 12:01 PM
S7
LViWID M 16 H l ki S i I S006 S007 M i REBRANDN b 1220159 18AM
widia.com
Modular and Indexable Drills
Grades and Grade Descriptions
Coatings provide high-speed capability
and are engineered for fi nishing to light
roughing.
Grade
P
Steel
M
Stainless Steel
K
Cast Iron
N
Non-Ferrous
S
High-Temp Alloys
H
Hardened Materials
wear
resistance
toughness
Coating Grade Description
05 10 15 20 25 30 35 40 45
WPK10CH
Composition: With an advanced CVD TiCN-Al2O3 coating combined with a cobalt-
enriched carbide substrate, this grade offers a balanced combination of deformation
resistance and edge toughness.
Application: Offers outstanding abrasion and crater wear resistance for high-speed
machining of steels and cast irons. Use for very high cutting speeds with low to
medium feed rates.
P
K
WU25CH
Composition: Advanced CVD TiCN-Al2O3 coating together with a newly engineered
tough carbide substrate. Ensures adequate deformation resistance and excellent
edge strength and offers very good wear resistance over a wide range of
machining conditions.
Application: A high productivity grade with high speeds and feeds. First choice
for high productivity with excellent reliability in steels, stainless steels,
and cast iron rates.
P
M
K
WU40PH
Composition: With a multilayered PVD TiN-TiAlN coating and a tough substrate,
this grade withstands interruptions and provides high wear resistance for long tool life.
Application: First choice for high reliability in most materials. This grade should be
used at medium speeds and high feeds due to sharper edges and as a grade for high-
toughness applications. It covers steel, stainless steel, cast iron, and high-temp alloys
under certain conditions.
P
M
K
WU25PD
Composition: With a multilayered PVD TiN-TiAlN coating and a high-quality
submicron carbide substrate, this grade gives a high level of wear resistance at
medium to high cutting speeds.
Application: First choice for high reliability in most materials. This grade should be
used at medium to high speeds and feeds. It is a general purpose grade that performs
very well for alloyed and high-alloy steel and cast iron, but can also be used with
excellent performance in stainless steels.
NOTE: Previously named K20FTiAlN.
P
M
K
WID_Master16_Holemaking_SectionIntro_S006_S007_Metric_REBRAND.indd 7 11/12/15 12:01 PM
S8
LViWID M 16 H l ki S i I S008 S009 M i REBRANDN b 13 20151 53PM
widia.com
Hole Finishing
Grades and Grade Descriptions
Coatings provide high-speed
capability and are engineered
for fi nishing to heavy roughing.
PSteel
MStainless Steel
KCast Iron
NNon-Ferrous
SHigh-Temp Alloys
HHardened Materials
K10F-DCFD
Composition: With a PVD TiAlN coating and a ne grain carbide substrate, this grade
offers excellent wear resistance paired with good toughness for medium speed
ne- nishing applications.
Application: First choice for precision reaming of steels, stainless steel, and cast irons.
P
M
K
CERMETDCFD
Composition: With a PVD TiAlN coating and a cermet substrate, this grade offers
exceptional wear resistance for high speed ne nishing applications.
Application: First choice for precision reaming of steels and cast irons.
P
K
Grade
K10F
Composition: This uncoated ne grain carbide with high hardness offers excellent
abrasive wear resistance paired with excellent toughness for ne- nishing applications.
Application: First choice for precision reaming of non-ferrous materials.
P
N
S
wear
resistance toughness
Coating Grade Description 05 10 15 20 25 30 35 40 45
PSteel
MStainless Steel
KCast Iron
NNon-Ferrous
SHigh-Temp Alloys
HHardened Materials
WID_Master16_Holemaking_SectionIntro_S008_S009_Metric_REBRAND.indd 8 11/13/15 2:26 PM
NOVO KNOWS CAD/CAM
With the addition of NOVO™ to your team, your CAD/CAM capabilities become much
more accurate, streamlined, and productive.
With NOVO: The powerful digital intelligence
of NOVO not only helps the programmer find
the right tool for the metalcutting job, but also
automatically integrates all the tooling data into a
complete CAD/CAM solution. The integration of all
the tooling data increases the viability of the part
being programmed, and is delivered quickly —
saving you time.
Before NOVO: The programmer would be in
their CAD/CAM software, programming a part.
Using the outdated method of finding a tool in
a catalogue, and then manually inputting the
tooling information from the catalogue into the
CAD/CAM software.
The concern is that assumptions are made,
and only partial tooling information is entered.
NOVO can ensure you have the right tools on your machines, in the right sequence. Resulting in
flawless execution that accelerates every job, and maximises every shift. widia.com/novo
WID_Master16_Holemaking_SectionIntro_S008_S009_Metric_REBRAND.indd 9 11/13/15 2:27 PM
LViWID M 16 H l ki S lidC bid D ill T000 T001 M i REBRANDD b 14 20152 36PM
WID_Master16_Holemaking_SolidCarbideDrills_T000_T001_Metric_REBRAND.indd 1 12/14/15 2:41 PM
T1
LViWID M 16 H l ki S lidC bid D ill T000 T001 M i REBRANDD b 1420152 36PM
widia.com
Holemaking • High-Performance Solid Carbide Drills
Introduction ........................................................................................................................................................... T2–T4
VariDrill ................................................................................................................................................................ T6–T45
TOP DRILL S ..................................................................................................................................................... T48–T75
TOP DRILL S+ ................................................................................................................................................... T76–T96
TOP DRILL S+ 12 x D ..................................................................................................................................... T98–T103
TOP DRILL Deep-Hole Drills ....................................................................................................................... T104–T117
TOP DRILL G ................................................................................................................................................. T118–T139
Technical Information .................................................................................................................................. T142–T149
WID_Master16_Holemaking_SolidCarbideDrills_T000_T001_Metric_REBRAND.indd 1 12/14/15 2:41 PM
T2
LViWID M 16 H l ki S lidC bid D ill T002 T003 M i REBRANDN b 12 20159 20AM
widia.com
Solid Carbide Drills
solid carbide drills
for external coolant
or dry machining series grade
standard
hole
tolerance
standard range
rst choice
alternate choice
diameter range drilling
depth
L/D1PMKNSH min–max min–max
VariDrill
™
multiple-material drilling VDS20 WU25PD IT9–IT10
1,0–20,0 .0394–.7874 3 x–5 x
TOP DRILL S
™
for steel
application-specic drilling TDS202 WP20PD IT9–IT10
3,0–20,0 .1181–.7874 5 x D
TOP DRILL S for cast iron
application-specic drilling TDS212 WK15PD IT9–IT10
3,0–20,0 .1181–.7874 5 x D
TOP DRILL S+
™
multiple-application drilling TDS301 WU25PD IT9–IT10
3,0–20,0 .1181–.7874 3 x D
Tool Selection Guide
solid carbide drills
with internal coolant channel series grade
standard
hole
tolerance
standard range
rst choice
alternate choice
diameter range drilling
depth
L/D1PMKNSH min–max min–max
VariDrill
multiple-material drilling VDS40 WU25PD
IT9–IT10
1,0–20,0 .0394–.7874 3 x–8 x
TOP DRILL S for steel
application-specic drilling TDS40 WP20PD
IT9–IT10
3,0–20,0 .1181–.7874 3 x–8 x
TOP DRILL S for cast iron
application-specic drilling TDS41 WK15PD
IT9–IT10
3,0–20,0 .1181–.7874 3 x–8 x
TOP DRILL S+
multiple-application drilling TDS50 WU25PD
IT9–IT10
3,0–20,0 .1181–.7874 3 x–8 x
TOP DRILL S+ 12 x D
deep-hole drilling without
piloting
TDS504 WU20PD
IT9–IT10
3,0–20,0 .1181–.7874 3 x–8 x
TOP DRILL Deep
superior deep-hole drilling TDD10 WU20PD
IT9–IT10
3,0–20,0 .1181–.5118 15 x–
30 x
TOP DRILL G
™
difcult drilling applications TDG53 WN10HD
IT8–IT9
3,0–20,0 .1181–.7874 5 x–12 x
TOP DRILL Flat-Bottom
for at-bottom applications TDF51
WU20PD
IT9–IT10
———
WN15HD
IT9–IT10
———
WID_Master16_Holemaking_SolidCarbideDrills_T002_T003_Metric_REBRAND.indd 2 11/12/15 12:01 PM
T3
LViWID M 16 H l ki S lidC bid D ill T002 T003 M i REBRANDN b 1220159 20AM
widia.com
Solid Carbide Drills
custom solution range standard
engineered solution capabilities
page(s)
diameter range
drilling
depth
D1
mm
D1
in
min-max min-max
1,0–20,0 .0394–1.00 1.5–8 x
T8–T21
3,0–25,0 .1181–1.00 1.5–8 x T50–T75
3,0–25,0 .1181–1.00 1.5–8 x T50–T75
3,0–25,0 .1181–1.00 1.5–5 x T78–T96
Tool Selection Guide
engineered solution range standard
engineered solution capabilities
page(s)
diameter range
drilling
depth
D1 mm D1 in
min-max min-max
1,0–20,0 .0394–1.00 1.5–8 x
T8–T45
3,0–25,0 .1181–1.00 1.5–8 x
T50–T75
2,4–20,0 .1181–1.00 1.5–8 x
T50–T75
3,0–25,0 .1181–1.00 1.5–8 x
T78–T96
2,4–16,0 .1181–.7874 1.5–12 x
T100–T103
3,0–25,0 .0938–.6299 500mm
T106–T117
3,0–25,0 .1181–1.00 1.5–12 x
T120–T139
3,0–25,0 .1181–1.00 1.5–8 x
T46
3,0–25,0 .1181–1.00 1.5–8 x
T46
WID_Master16_Holemaking_SolidCarbideDrills_T002_T003_Metric_REBRAND.indd 3 11/12/15 12:01 PM
T4
LViWID M 16 H l ki S lidC bid D ill T004 T005 M i REBRANDN b 10 20152 52PM
widia.com
Solid Carbide Drills • Recommendation Chart
Solid Carbide Drills
Recommendation Chart
standard fi rst choice
alternate choice
simple special
Versatile Application-Specifi c
General
Purpose
General
Purpose Multipurpose Multipurpose High-
Performance
High-
Performance Deep-Hole Drilling
VariDrill
™
VariDrill
™
Top Drill S+
™
Top Drill S+ Top Drill S/G Top Drill S/G WIDIA TDS+
WIDIA TDD
PSteel
3 x D - VDS201A
3 x D - VDS201F
5 x D - VDS202A
5 x D - VDS202F
3 x D - VDS401A
3 x D - VDS401F
5 x D - VDS402A
5 x D - VDS402F
8 x D - VDS403A
8 x D - VDS403F
3 x D - TDS301A 3 x D - TDS501A
5 x D - TDS502A
8 x D - TDS503A
5 x D - TDS202A
3 x D - TDS401A
5 x D - TDS402A
8 x D - TDS403A
12 x D - TDS504A
15 x D - TDD105Z
20 x D - TDD106Z
25 x D - TDD107Z
30 x D - TDD108Z
MStainless
Steel
3 x D - VDS201A
3 x D - VDS201F
5 x D - VDS202A
5 x D - VDS202F
3 x D - VDS401A
3 x D - VDS401F
5 x D - VDS402A
5 x D - VDS402F
8 x D - VDS403A
8 x D - VDS403F
3 x D - TDS301A 3 x D - TDS501A
5 x D - TDS502A
8 x D - TDS503A –
WIDIA-Rübig™
Series Type WD
12 x D - TDS504A
15 x D - TDD105Z
20 x D - TDD106Z
25 x D - TDD107Z
30 x D - TDD108Z
K Cast Iron
3 x D - VDS201A
3 x D - VDS201F
5 x D - VDS202A
5 x D - VDS202F
3 x D - VDS401A
3 x D - VDS401F
5 x D - VDS402A
5 x D - VDS402F
8 x D - VDS403A
8 x D - VDS403F
3 x D - TDS301A 3 x D - TDS501A
5 x D - TDS502A
8 x D - TDS503A
5 x D - TDS212A
3 x D - TDS411A
5 x D - TDS412A
8 x D - TDS413A
12 x D - TDS504A
15 x D - TDD105Z
20 x D - TDD106Z
25 x D - TDD107Z
30 x D - TDD108Z
NNon-Ferrous
3 x D - VDS201A
3 x D - VDS201F
5 x D - VDS202A
5 x D - VDS202F
3 x D - VDS401A
3 x D - VDS401F
5 x D - VDS402A
5 x D - VDS402F
8 x D - VDS403A
8 x D - VDS403F
3 x D - TDS301A 3 x D - TDS501A
5 x D - TDS502A
8 x D - TDS503A
5 x D - TDG531A
8 x D - TDG532A
12 x D - TDG533A
TDD*
uncoated, sharp
S
Heat-
Resistant
Alloys,
Titanium
Alloys
3 x D - VDS201A
3 x D - VDS201F
5 x D - VDS202A
5 x D - VDS202F
3 x D - VDS401A
3 x D - VDS401F
5 x D - VDS402A
5 x D - VDS402F
8 x D - VDS403A
8 x D - VDS403F
3 x D - TDS301A 3 x D - TDS501A
5 x D - TDS502A
8 x D - TDS503A
–
WIDIA-Rübig
Series Type WD
12 x D - TDS504A
15 x D - TDD105Z
20 x D - TDD106Z
25 x D - TDD107Z
30 x D - TDD108Z
HHard
Materials
VDS
3 x D - M155
VDS TDS+
WID_Master16_Holemaking_SolidCarbideDrills_T004_T005_Metric_REBRAND.indd 4 11/10/15 5:02 PM
LViWID M 16 H l ki S lidC bid D ill T004 T005 M i REBRANDN b 1020152 52PM
Top Drill S is the WIDIA line of solid carbide drills engineered to provide maximum
performance and superior fi nish to application-specifi c tasks in steel and cast iron.
• Victory grades WP20PD™ for steel and WK15PD™ for cast iron are specially designed
to resist high heat and wear.
• Lower cost-per-hole and greater productivity due to high MRR and long tool life.
• One of the broadest ranges in the market for diameter selection, length series,
and coolant options.
To learn more about the benefi ts of WIDIA™ Top Drill S, contact your local distributor.
Top Drill S™
Application-
Specifi c Drilling
for Steel and
Cast Iron
WID_Master16_Holemaking_SolidCarbideDrills_T004_T005_Metric_REBRAND.indd 5 11/10/15 5:02 PM
T6
LViWID M 16 H l ki S lidC bid D ill T006 T007 M i REBRANDN b 12 20159 25AM
widia.com
WIDIA WU25PD™ drilling grade
Extremely high wear resistance
and longer tool life.
VariDrill core design
Free chip fl ow and chip evacuation.
Precision shank
Low runout.
Marginless design
Distributes cutting forces evenly for
less chipping on the cutting edge.
VariDrill point design
Long tool life in all materials;
less chipping on cutting edge.
• Reduced chipping on cutting edge means longer tool life.
• Geometry design offers strength and versatility.
• Delivers proper surface fi nish across multiple materials:
steel, stainless steel, cast iron, aluminium, and high-temp alloys.
Multiple-Material Drilling •
WIDIA™ VariDrill™
VariDrill
The VariDrill advanced-point geometry design offers the ultimate solution for
multipurpose drilling operations. It offers dependable tool life in all materials
due to less chipping on the cutting edge.
WID_Master16_Holemaking_SolidCarbideDrills_T006_T007_Metric_REBRAND.indd 6 11/12/15 12:01 PM
T7
LViWID M 16 H l ki S lidC bid D ill T006 T007 M i REBRANDN b 1220159 25AM
widia.com
Innovative Technology
VariDrill™ is a technologically advanced holemaking solution. These high-
performance solid carbide drills were designed in Germany to provide the
transportation, aerospace, general engineering, and energy industries
with a tool that performs on multiple materials.
Elegance, Strength, and Versatility
The engineers at WIDIA™ developed an innovative new design to deliver
drilling performance. These solid carbide drills have a distinctive geometry and
marginless design. The VariDrill point is versatile enough to work through steel,
stainless steel, cast iron, aluminium, and a range of high-temp alloys.
Optimum Hole Quality
The unique marginless design reduces chipping on the tool’s edge and
stabilises cutting forces. This unique tool geometry enables chips to roll
smoothly and evacuate easily, resulting in noticeably less friction, heat,
jamming, and scratching. By minimising these drilling issues, VariDrill
delivers an optimum surface finish with every hole — no matter the material.
More Options and Longer Tool Life
Aside from its uniquely engineered design, VariDrill also offers a broad portfolio
of drilling options. With more than 2,200 items, VariDrill offers more choices
than any other drill for general engineering operations. And because most drills
can be reconditioned, your tools will gain extended life.
VariDrill — Innovatively designed and technologically advanced.
Make VariDrill your go-to drill for hole after hole...after hole.
WID_Master16_Holemaking_SolidCarbideDrills_T006_T007_Metric_REBRAND.indd 7 11/12/15 12:01 PM
T8
LViWID M 16 H l ki S lidC bid D ill T008 T009 M i REBRANDO b 15 20153 12PM
widia.com
VDS201A • WU25PD VDS401A • WU25PD
Solid Carbide Drills
VariDrill™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 3 x D
VDS201A • VDS401A • 3 x D
D1 diameter
grade WU25PD
TiAlN
order # catalogue #
grade WU25PD
TiAlN
order # catalogue # mm in L4 max L3 L5 L LS D
4144195 VDS201A01000 – 1,000 .0394 5 7 0,1 58 28 4
4144196 VDS201A01016 – 1,016 .0400 5 7 0,1 58 28 4
4144197 VDS201A01041 – 1,041 .0410 5 7 0,2 58 28 4
4144198 VDS201A01067 – 1,067 .0420 5 7 0,2 58 28 4
4144199 VDS201A01092 – 1,092 .0430 5 7 0,2 58 28 4
4144200 VDS201A01100 – 1,100 .0433 5 7 0,2 58 28 4
4144201 VDS201A01181 – 1,181 .0465 5 7 0,2 58 28 4
4144202 VDS201A01191 – 1,191 .0469 5 7 0,2 58 28 4
4144523 VDS201A01200 – 1,200 .0472 5 7 0,2 58 28 4
4144524 VDS201A01300 – 1,300 .0512 5 7 0,2 58 28 4
4144525 VDS201A01321 – 1,321 .0520 5 7 0,2 58 28 4
4144526 VDS201A01397 – 1,397 .0550 5 7 0,2 58 28 4
4144527 VDS201A01400 – 1,400 .0551 5 7 0,2 58 28 4
4144528 VDS201A01500 4140270 VDS401A01500 1,500 .0591 6 9 0,2 58 28 4
4144529 VDS201A01600 4140271 VDS401A01600 1,600 .0630 6 9 0,2 58 28 4
4144530 VDS201A01700 4140272 VDS401A01700 1,700 .0669 6 9 0,3 58 28 4
4144531 VDS201A01800 4140423 VDS401A01800 1,800 .0709 6 9 0,3 58 28 4
4144532 VDS201A01900 4140424 VDS401A01900 1,900 .0748 6 9 0,3 58 28 4
4144533 VDS201A01984 4140425 VDS401A01984 1,984 .0781 10 13 0,3 58 28 4
4144534 VDS201A02000 4140426 VDS401A02000 2,000 .0787 10 13 0,3 58 28 4
4144535 VDS201A02100 4140427 VDS401A02100 2,100 .0827 10 13 0,3 58 28 4
4144536 VDS201A02200 4140428 VDS401A02200 2,200 .0866 10 13 0,3 58 28 4
4144537 VDS201A02300 4140429 VDS401A02300 2,300 .0906 10 13 0,4 58 28 4
4144538 VDS201A02383 4140430 VDS401A02383 2,383 .0938 12 17 0,4 58 28 4
rst choice
alternate choice
(continued)
For information on L, L3, and L4 max, see page T143.
Solid Carbide Drills
WID_Master16_Holemaking_SolidCarbideDrills_T008_T009_Metric_REBRAND.indd 8 10/29/15 1:21 PM
T9
LViWID M 16 H l ki S lidC bid D ill T008 T009 M i REBRANDO b 1520153 12PM
widia.com
VDS201A • WU25PD VDS401A • WU25PD
D1 diameter
grade WU25PD
TiAlN
order # catalogue #
grade WU25PD
TiAlN
order # catalogue # mm in L4 max L3 L5 L LS D
4144539 VDS201A02400 4140431 VDS401A02400 2,400 .0945 12 17 0,4 58 28 4
4144540 VDS201A02439 4140432 VDS401A02439 2,439 .0960 12 17 0,4 58 28 4
4144541 VDS201A02489 4140433 VDS401A02489 2,489 .0980 12 17 0,4 58 28 4
4144542 VDS201A02500 4140434 VDS401A02500 2,500 .0984 12 17 0,4 58 28 4
4144543 VDS201A02578 4140435 VDS401A02578 2,578 .1015 12 17 0,4 58 28 4
4144544 VDS201A02600 4140436 VDS401A02600 2,600 .1024 12 17 0,4 58 28 4
4144545 VDS201A02642 4140437 VDS401A02642 2,642 .1040 12 17 0,4 58 28 4
4144546 VDS201A02700 4140438 VDS401A02700 2,700 .1063 12 17 0,4 58 28 4
4144547 VDS201A02705 4140439 VDS401A02705 2,705 .1065 12 17 0,4 58 28 4
4144548 VDS201A02779 4140440 VDS401A02779 2,779 .1094 12 17 0,4 58 28 4
4144549 VDS201A02800 4140441 VDS401A02800 2,800 .1102 12 17 0,5 58 28 4
4144550 VDS201A02820 4140442 VDS401A02820 2,820 .1110 12 17 0,5 58 28 4
4144551 VDS201A02870 4140443 VDS401A02870 2,870 .1130 12 17 0,5 58 28 4
4144552 VDS201A02900 4140444 VDS401A02900 2,900 .1142 12 17 0,5 58 28 4
4144553 VDS201A02947 4140445 VDS401A02947 2,947 .1160 12 17 0,5 58 28 4
4143907 VDS201A03000 4140299 VDS401A03000 3,000 .1181 14 20 0,5 62 36 6
4143908 VDS201A03048 4140300 VDS401A03048 3,048 .1200 14 20 0,5 62 36 6
4143909 VDS201A03100 4140301 VDS401A03100 3,100 .1220 14 20 0,5 62 36 6
4143910 VDS201A03175 4140302 VDS401A03175 3,175 .1250 14 20 0,5 62 36 6
4143911 VDS201A03200 4140303 VDS401A03200 3,200 .1260 14 20 0,5 62 36 6
4143912 VDS201A03264 4140304 VDS401A03264 3,264 .1285 14 20 0,5 62 36 6
4143913 VDS201A03300 4140305 VDS401A03300 3,300 .1299 14 20 0,5 62 36 6
4143914 VDS201A03400 4140306 VDS401A03400 3,400 .1339 14 20 0,6 62 36 6
4143915 VDS201A03455 4140307 VDS401A03455 3,455 .1360 14 20 0,6 62 36 6
4143916 VDS201A03500 4140308 VDS401A03500 3,500 .1378 14 20 0,6 62 36 6
4143917 VDS201A03571 4140309 VDS401A03571 3,571 .1406 14 20 0,6 62 36 6
4143918 VDS201A03600 4140310 VDS401A03600 3,600 .1417 14 20 0,6 62 36 6
4143919 VDS201A03658 4140311 VDS401A03658 3,658 .1440 14 20 0,6 62 36 6
4143920 VDS201A03700 4140312 VDS401A03700 3,700 .1457 14 20 0,6 62 36 6
4143921 VDS201A03734 4140313 VDS401A03734 3,734 .1470 14 20 0,6 62 36 6
4143922 VDS201A03800 4140314 VDS401A03800 3,800 .1496 17 24 0,6 66 36 6
4143923 VDS201A03900 4140315 VDS401A03900 3,900 .1535 17 24 0,6 66 36 6
4143924 VDS201A03970 4140316 VDS401A03970 3,970 .1563 17 24 0,7 66 36 6
4143925 VDS201A04000 4140317 VDS401A04000 4,000 .1575 17 24 0,7 66 36 6
4143926 VDS201A04039 4140318 VDS401A04039 4,039 .1590 17 24 0,7 66 36 6
4143927 VDS201A04090 4140319 VDS401A04090 4,090 .1610 17 24 0,7 66 36 6
4143928 VDS201A04100 4140320 VDS401A04100 4,100 .1614 17 24 0,7 66 36 6
4143929 VDS201A04200 4140321 VDS401A04200 4,200 .1654 17 24 0,7 66 36 6
4143930 VDS201A04217 4140322 VDS401A04217 4,217 .1660 17 24 0,7 66 36 6
4143931 VDS201A04300 4140323 VDS401A04300 4,300 .1693 17 24 0,7 66 36 6
(VDS201A • VDS401A • 3 x D — continued)
(continued)
Solid Carbide Drills
VariDrill™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 3 x D
Solid Carbide Drills
rst choice
alternate choice
WID_Master16_Holemaking_SolidCarbideDrills_T008_T009_Metric_REBRAND.indd 9 10/29/15 1:21 PM
T10
LViWID M 16 H l ki S lidC bid D ill T010 T011 M i REBRANDO b 15 20153 13PM
widia.com
VDS201A • WU25PD VDS401A • WU25PD
(VDS201A • VDS401A • 3 x D — continued)
(continued)
Solid Carbide Drills
VariDrill™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 3 x D
rst choice
alternate choice
Solid Carbide Drills
D1 diameter
grade WU25PD
TiAlN
order # catalogue #
grade WU25PD
TiAlN
order # catalogue # mm in L4 max L3 L5 L LS D
4143932 VDS201A04366 4140324 VDS401A04366 4,366 .1719 17 24 0,7 66 36 6
4143933 VDS201A04400 4140325 VDS401A04400 4,400 .1732 17 24 0,7 66 36 6
4143934 VDS201A04500 4140326 VDS401A04500 4,500 .1772 17 24 0,7 66 36 6
4143935 VDS201A04600 4140328 VDS401A04600 4,600 .1811 17 24 0,8 66 36 6
4143936 VDS201A04623 4140329 VDS401A04623 4,623 .1820 17 24 0,8 66 36 6
4143937 VDS201A04700 4140330 VDS401A04700 4,700 .1850 17 24 0,8 66 36 6
4143938 VDS201A04763 4140331 VDS401A04763 4,763 .1875 20 28 0,8 66 36 6
4143939 VDS201A04800 4140332 VDS401A04800 4,800 .1890 20 28 0,8 66 36 6
4143940 VDS201A04852 4140333 VDS401A04852 4,852 .1910 20 28 0,8 66 36 6
4143941 VDS201A04900 4140334 VDS401A04900 4,900 .1929 20 28 0,8 66 36 6
4143942 VDS201A05000 4140335 VDS401A05000 5,000 .1969 20 28 0,8 66 36 6
4143943 VDS201A05100 4140336 VDS401A05100 5,100 .2008 20 28 0,8 66 36 6
4143944 VDS201A05106 4140337 VDS401A05106 5,106 .2010 20 28 0,8 66 36 6
4143945 VDS201A05159 4140338 VDS401A05159 5,159 .2031 20 28 0,9 66 36 6
4143946 VDS201A05200 4140339 VDS401A05200 5,200 .2047 20 28 0,9 66 36 6
4143947 VDS201A05300 4140340 VDS401A05300 5,300 .2087 20 28 0,9 66 36 6
4143948 VDS201A05400 4140341 VDS401A05400 5,400 .2126 20 28 0,9 66 36 6
4143949 VDS201A05410 4140342 VDS401A05410 5,410 .2130 20 28 0,9 66 36 6
4143950 VDS201A05500 4140343 VDS401A05500 5,500 .2165 20 28 0,9 66 36 6
4143951 VDS201A05558 4140344 VDS401A05558 5,558 .2188 20 28 0,9 66 36 6
4143952 VDS201A05600 4140345 VDS401A05600 5,600 .2205 20 28 0,9 66 36 6
4143953 VDS201A05616 4140346 VDS401A05616 5,616 .2211 20 28 0,9 66 36 6
4143954 VDS201A05700 4140347 VDS401A05700 5,700 .2244 20 28 1,0 66 36 6
4143955 VDS201A05800 4140348 VDS401A05800 5,800 .2283 20 28 1,0 66 36 6
4143956 VDS201A05900 4140349 VDS401A05900 5,900 .2323 20 28 1,0 66 36 6
4143957 VDS201A05954 4140350 VDS401A05954 5,954 .2344 20 28 1,0 66 36 6
4143958 VDS201A06000 4140351 VDS401A06000 6,000 .2362 20 28 1,0 66 36 6
4143959 VDS201A06100 4140352 VDS401A06100 6,100 .2402 24 34 1,0 79 36 8
4143960 VDS201A06200 4140353 VDS401A06200 6,200 .2441 24 34 1,0 79 36 8
4143961 VDS201A06300 4140354 VDS401A06300 6,300 .2480 24 34 1,1 79 36 8
4143962 VDS201A06350 4140355 VDS401A06350 6,350 .2500 24 34 1,1 79 36 8
4143963 VDS201A06400 4140356 VDS401A06400 6,400 .2520 24 34 1,1 79 36 8
4143964 VDS201A06500 4140357 VDS401A06500 6,500 .2559 24 34 1,1 79 36 8
4143965 VDS201A06528 4140358 VDS401A06528 6,528 .2570 24 34 1,1 79 36 8
4143966 VDS201A06600 4140359 VDS401A06600 6,600 .2598 24 34 1,1 79 36 8
4143967 VDS201A06630 4140360 VDS401A06630 6,630 .2610 24 34 1,1 79 36 8
4143968 VDS201A06700 4140361 VDS401A06700 6,700 .2638 24 34 1,1 79 36 8
4143969 VDS201A06746 4140362 VDS401A06746 6,746 .2656 24 34 1,1 79 36 8
4143970 VDS201A06800 4140363 VDS401A06800 6,800 .2677 24 34 1,1 79 36 8
4143971 VDS201A06900 4140364 VDS401A06900 6,900 .2717 24 34 1,2 79 36 8
WID_Master16_Holemaking_SolidCarbideDrills_T010_T011_Metric_REBRAND.indd 10 10/29/15 1:21 PM
T11
LViWID M 16 H l ki S lidC bid D ill T010 T011 M i REBRANDO b 1520153 13PM
widia.com
VDS201A • WU25PD VDS401A • WU25PD
(VDS201A • VDS401A • 3 x D — continued)
(continued)
Solid Carbide Drills
VariDrill™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 3 x D
rst choice
alternate choice
Solid Carbide Drills
D1 diameter
grade WU25PD
TiAlN
order # catalogue #
grade WU25PD
TiAlN
order # catalogue # mm in L4 max L3 L5 L LS D
4143972 VDS201A07000 4140365 VDS401A07000 7,000 .2756 24 34 1,2 79 36 8
4143973 VDS201A07100 4140366 VDS401A07100 7,100 .2795 29 41 1,2 79 36 8
4143974 VDS201A07145 4140367 VDS401A07145 7,145 .2813 29 41 1,2 79 36 8
4143975 VDS201A07200 4140368 VDS401A07200 7,200 .2835 29 41 1,2 79 36 8
4143976 VDS201A07300 4140369 VDS401A07300 7,300 .2874 29 41 1,2 79 36 8
4143977 VDS201A07400 4140370 VDS401A07400 7,400 .2913 29 41 1,3 79 36 8
4143978 VDS201A07500 4140371 VDS401A07500 7,500 .2953 29 41 1,3 79 36 8
4143979 VDS201A07541 4140372 VDS401A07541 7,541 .2969 29 41 1,3 79 36 8
4143980 VDS201A07600 4140373 VDS401A07600 7,600 .2992 29 41 1,3 79 36 8
4143981 VDS201A07700 4140374 VDS401A07700 7,700 .3031 29 41 1,3 79 36 8
4143982 VDS201A07800 4140375 VDS401A07800 7,800 .3071 29 41 1,3 79 36 8
4143983 VDS201A07900 4140376 VDS401A07900 7,900 .3110 29 41 1,3 79 36 8
4143984 VDS201A07938 4140377 VDS401A07938 7,938 .3125 29 41 1,3 79 36 8
4143985 VDS201A08000 4140378 VDS401A08000 8,000 .3150 29 41 1,4 79 36 8
4143986 VDS201A08100 4140379 VDS401A08100 8,100 .3189 35 47 1,4 89 40 10
4143987 VDS201A08200 4140380 VDS401A08200 8,200 .3228 35 47 1,4 89 40 10
4143988 VDS201A08300 4140381 VDS401A08300 8,300 .3268 35 47 1,4 89 40 10
4143989 VDS201A08334 4140382 VDS401A08334 8,334 .3281 35 47 1,4 89 40 10
4143990 VDS201A08400 4140383 VDS401A08400 8,400 .3307 35 47 1,4 89 40 10
4143991 VDS201A08433 4140384 VDS401A08433 8,433 .3320 35 47 1,4 89 40 10
4143992 VDS201A08500 4140385 VDS401A08500 8,500 .3346 35 47 1,4 89 40 10
4143993 VDS201A08600 4140386 VDS401A08600 8,600 .3386 35 47 1,5 89 40 10
4143994 VDS201A08700 4140387 VDS401A08700 8,700 .3425 35 47 1,5 89 40 10
4143995 VDS201A08733 4140388 VDS401A08733 8,733 .3438 35 47 1,5 89 40 10
4143996 VDS201A08800 4140389 VDS401A08800 8,800 .3465 35 47 1,5 89 40 10
4143997 VDS201A08900 4140390 VDS401A08900 8,900 .3504 35 47 1,5 89 40 10
4143998 VDS201A09000 4140391 VDS401A09000 9,000 .3543 35 47 1,5 89 40 10
4143999 VDS201A09100 4140392 VDS401A09100 9,100 .3583 35 47 1,5 89 40 10
4144000 VDS201A09129 4140393 VDS401A09129 9,129 .3594 35 47 1,6 89 40 10
4144001 VDS201A09200 4140394 VDS401A09200 9,200 .3622 35 47 1,6 89 40 10
4144002 VDS201A09300 4140395 VDS401A09300 9,300 .3661 35 47 1,6 89 40 10
4144003 VDS201A09347 4140396 VDS401A09347 9,347 .3680 35 47 1,6 89 40 10
4144004 VDS201A09400 4140397 VDS401A09400 9,400 .3701 35 47 1,6 89 40 10
4144005 VDS201A09500 4140398 VDS401A09500 9,500 .3740 35 47 1,6 89 40 10
4144006 VDS201A09525 4140399 VDS401A09525 9,525 .3750 35 47 1,6 89 40 10
4144007 VDS201A09600 4140400 VDS401A09600 9,600 .3780 35 47 1,6 89 40 10
4144008 VDS201A09700 4140401 VDS401A09700 9,700 .3819 35 47 1,7 89 40 10
4144009 VDS201A09800 4140402 VDS401A09800 9,800 .3858 35 47 1,7 89 40 10
4144010 VDS201A09900 4140403 VDS401A09900 9,900 .3898 35 47 1,7 89 40 10
4144011 VDS201A09921 4140404 VDS401A09921 9,921 .3906 35 47 1,7 89 40 10
WID_Master16_Holemaking_SolidCarbideDrills_T010_T011_Metric_REBRAND.indd 11 10/29/15 1:21 PM
T12
LViWID M 16 H l ki S lidC bid D ill T012 T013 M i REBRANDO b 15 20153 14PM
widia.com
VDS201A • WU25PD VDS401A • WU25PD
(VDS201A • VDS401A • 3 x D — continued)
(continued)
Solid Carbide Drills
VariDrill™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 3 x D
rst choice
alternate choice
Solid Carbide Drills
D1 diameter
grade WU25PD
TiAlN
order # catalogue #
grade WU25PD
TiAlN
order # catalogue # mm in L4 max L3 L5 L LS D
4144172 VDS201A10000 4140001 VDS401A10000 10,000 .3937 35 47 1,7 89 40 10
4144423 VDS201A10100 4140002 VDS401A10100 10,100 .3976 40 55 1,7 102 45 12
4144424 VDS201A10200 4140163 VDS401A10200 10,200 .4016 40 55 1,7 102 45 12
4144425 VDS201A10300 4140164 VDS401A10300 10,300 .4055 40 55 1,8 102 45 12
4144426 VDS201A10320 4140165 VDS401A10320 10,320 .4063 40 55 1,8 102 45 12
4144427 VDS201A10400 4140166 VDS401A10400 10,400 .4094 40 55 1,8 102 45 12
4144428 VDS201A10500 4140167 VDS401A10500 10,500 .4134 40 55 1,8 102 45 12
4144429 VDS201A10600 4140168 VDS401A10600 10,600 .4173 40 55 1,8 102 45 12
4144430 VDS201A10700 4140169 VDS401A10700 10,700 .4213 40 55 1,8 102 45 12
4144431 VDS201A10716 4140170 VDS401A10716 10,716 .4219 40 55 1,8 102 45 12
4144432 VDS201A10800 4140171 VDS401A10800 10,800 .4252 40 55 1,8 102 45 12
4144433 VDS201A10900 4140172 VDS401A10900 10,900 .4291 40 55 1,9 102 45 12
4144434 VDS201A11000 4140173 VDS401A11000 11,000 .4331 40 55 1,9 102 45 12
4144435 VDS201A11100 4140174 VDS401A11100 11,100 .4370 40 55 1,9 102 45 12
4144436 VDS201A11113 4140175 VDS401A11113 11,113 .4375 40 55 1,9 102 45 12
4144437 VDS201A11200 4140176 VDS401A11200 11,200 .4409 40 55 1,9 102 45 12
4144438 VDS201A11300 4140177 VDS401A11300 11,300 .4449 40 55 1,9 102 45 12
4144439 VDS201A11400 4140178 VDS401A11400 11,400 .4488 40 55 2,0 102 45 12
4144440 VDS201A11500 4140179 VDS401A11500 11,500 .4528 40 55 2,0 102 45 12
4144441 VDS201A11509 4140180 VDS401A11509 11,509 .4531 40 55 2,0 102 45 12
4144442 VDS201A11600 4140181 VDS401A11600 11,600 .4567 40 55 2,0 102 45 12
4144443 VDS201A11700 4140182 VDS401A11700 11,700 .4606 40 55 2,0 102 45 12
4144444 VDS201A11800 4140183 VDS401A11800 11,800 .4646 40 55 2,0 102 45 12
4144445 VDS201A11900 4140184 VDS401A11900 11,900 .4685 40 55 2,0 102 45 12
4144446 VDS201A11908 4140185 VDS401A11908 11,908 .4688 40 55 2,0 102 45 12
4144447 VDS201A12000 4140186 VDS401A12000 12,000 .4724 40 55 2,1 102 45 12
4144448 VDS201A12100 4140187 VDS401A12100 12,100 .4764 43 60 2,1 107 45 14
4144449 VDS201A12200 4140188 VDS401A12200 12,200 .4803 43 60 2,1 107 45 14
4144450 VDS201A12300 4140189 VDS401A12300 12,300 .4843 43 60 2,1 107 45 14
4144451 VDS201A12304 4140190 VDS401A12304 12,304 .4844 43 60 2,1 107 45 14
4144452 VDS201A12400 4140191 VDS401A12400 12,400 .4882 43 60 2,1 107 45 14
4144453 VDS201A12500 4140192 VDS401A12500 12,500 .4921 43 60 2,1 107 45 14
4144454 VDS201A12600 4140194 VDS401A12600 12,600 .4961 43 60 2,2 107 45 14
4144455 VDS201A12700 4140195 VDS401A12700 12,700 .5000 43 60 2,2 107 45 14
4144456 VDS201A12800 4140196 VDS401A12800 12,800 .5039 43 60 2,2 107 45 14
4144457 VDS201A12900 4140197 VDS401A12900 12,900 .5079 43 60 2,2 107 45 14
4144458 VDS201A13000 4140198 VDS401A13000 13,000 .5118 43 60 2,2 107 45 14
4144459 VDS201A13096 4140199 VDS401A13096 13,096 .5156 43 60 2,3 107 45 14
4144460 VDS201A13100 4140200 VDS401A13100 13,100 .5157 43 60 2,3 107 45 14
4144461 VDS201A13200 4140201 VDS401A13200 13,200 .5197 43 60 2,3 107 45 14
WID_Master16_Holemaking_SolidCarbideDrills_T012_T013_Metric_REBRAND.indd 12 12/1/15 2:17 PM
T13
LViWID M 16 H l ki S lidC bid D ill T012 T013 M i REBRANDO b 1520153 14PM
widia.com
VDS201A • WU25PD VDS401A • WU25PD
(VDS201A • VDS401A • 3 x D — continued)
(continued)
Solid Carbide Drills
VariDrill™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 3 x D
rst choice
alternate choice
Solid Carbide Drills
D1 diameter
grade WU25PD
TiAlN
order # catalogue #
grade WU25PD
TiAlN
order # catalogue # mm in L4 max L3 L5 L LS D
4144462 VDS201A13300 4140202 VDS401A13300 13,300 .5236 43 60 2,3 107 45 14
4144463 VDS201A13400 4140203 VDS401A13400 13,400 .5276 43 60 2,3 107 45 14
4144464 VDS201A13500 4140204 VDS401A13500 13,500 .5315 43 60 2,3 107 45 14
4144465 VDS201A13600 4140205 VDS401A13600 13,600 .5354 43 60 2,3 107 45 14
4144466 VDS201A13700 4140206 VDS401A13700 13,700 .5394 43 60 2,4 107 45 14
4144467 VDS201A13800 4140207 VDS401A13800 13,800 .5433 43 60 2,4 107 45 14
4144468 VDS201A13891 4140208 VDS401A13891 13,891 .5469 43 60 2,4 107 45 14
4144469 VDS201A13900 4140209 VDS401A13900 13,900 .5472 43 60 2,4 107 45 14
4144470 VDS201A14000 4140210 VDS401A14000 14,000 .5512 43 60 2,4 107 45 14
4144471 VDS201A14100 4140211 VDS401A14100 14,100 .5551 45 65 2,4 115 48 16
4144472 VDS201A14200 4140212 VDS401A14200 14,200 .5591 45 65 2,5 115 48 16
4144473 VDS201A14288 4140213 VDS401A14288 14,288 .5625 45 65 2,5 115 48 16
4144474 VDS201A14300 4140214 VDS401A14300 14,300 .5630 45 65 2,5 115 48 16
4144475 VDS201A14400 4140215 VDS401A14400 14,400 .5669 45 65 2,5 115 48 16
4144476 VDS201A14500 4140216 VDS401A14500 14,500 .5709 45 65 2,5 115 48 16
4144477 VDS201A14600 4140217 VDS401A14600 14,600 .5748 45 65 2,5 115 48 16
4144478 VDS201A14684 4140218 VDS401A14684 14,684 .5781 45 65 2,5 115 48 16
4144479 VDS201A14700 4140219 VDS401A14700 14,700 .5787 45 65 2,5 115 48 16
4144480 VDS201A14800 4140220 VDS401A14800 14,800 .5827 45 65 2,6 115 48 16
4144481 VDS201A14900 4140221 VDS401A14900 14,900 .5866 45 65 2,6 115 48 16
4144482 VDS201A15000 4140222 VDS401A15000 15,000 .5906 45 65 2,6 115 48 16
4144483 VDS201A15083 4140223 VDS401A15083 15,083 .5938 45 65 2,6 115 48 16
4144484 VDS201A15100 4140224 VDS401A15100 15,100 .5945 45 65 2,6 115 48 16
4144485 VDS201A15200 4140225 VDS401A15200 15,200 .5984 45 65 2,6 115 48 16
4144486 VDS201A15300 4140226 VDS401A15300 15,300 .6024 45 65 2,6 115 48 16
4144487 VDS201A15400 4140227 VDS401A15400 15,400 .6063 45 65 2,7 115 48 16
4144488 VDS201A15479 4140228 VDS401A15479 15,479 .6094 45 65 2,7 115 48 16
4144489 VDS201A15500 4140229 VDS401A15500 15,500 .6102 45 65 2,7 115 48 16
4144490 VDS201A15600 4140230 VDS401A15600 15,600 .6142 45 65 2,7 115 48 16
4144491 VDS201A15700 4140231 VDS401A15700 15,700 .6181 45 65 2,7 115 48 16
4144492 VDS201A15800 4140232 VDS401A15800 15,800 .6220 45 65 2,7 115 48 16
4144493 VDS201A15875 4140233 VDS401A15875 15,875 .6250 45 65 2,7 115 48 16
4144494 VDS201A15900 4140234 VDS401A15900 15,900 .6260 45 65 2,8 115 48 16
4144495 VDS201A16000 4140235 VDS401A16000 16,000 .6299 45 65 2,8 115 48 16
4144496 VDS201A16100 4140236 VDS401A16100 16,100 .6339 51 73 2,8 123 48 18
4144497 VDS201A16200 4140237 VDS401A16200 16,200 .6378 51 73 2,8 123 48 18
4144498 VDS201A16271 4140238 VDS401A16271 16,271 .6406 51 73 2,8 123 48 18
4144499 VDS201A16300 4140239 VDS401A16300 16,300 .6417 51 73 2,8 123 48 18
4144500 VDS201A16400 4140241 VDS401A16400 16,400 .6457 51 73 2,8 123 48 18
4144501 VDS201A16500 4140242 VDS401A16500 16,500 .6496 51 73 2,9 123 48 18
WID_Master16_Holemaking_SolidCarbideDrills_T012_T013_Metric_REBRAND.indd 13 12/1/15 2:17 PM
T14
LViWID M 16 H l ki S lidC bid D ill T014 T015 M i REBRANDO b 15 20153 15PM
widia.com
(VDS201A • VDS401A • 3 x D — continued)
Solid Carbide Drills
VariDrill™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 3 x D
rst choice
alternate choice
VDS201A • WU25PD VDS401A • WU25PD
Solid Carbide Drills
D1 diameter
grade WU25PD
TiAlN
order # catalogue #
grade WU25PD
TiAlN
order # catalogue # mm in L4 max L3 L5 L LS D
4144503 VDS201A16600 4140243 VDS401A16600 16,600 .6535 51 73 2,9 123 48 18
4144504 VDS201A16670 4140244 VDS401A16670 16,670 .6563 51 73 2,9 123 48 18
4144505 VDS201A16700 4140245 VDS401A16700 16,700 .6575 51 73 2,9 123 48 18
4144506 VDS201A16800 4140246 VDS401A16800 16,800 .6614 51 73 2,9 123 48 18
4144507 VDS201A16900 4140247 VDS401A16900 16,900 .6654 51 73 2,9 123 48 18
4144508 VDS201A17000 4140248 VDS401A17000 17,000 .6693 51 73 2,9 123 48 18
4144509 VDS201A17100 4140249 VDS401A17100 17,100 .6732 51 73 3,0 123 48 18
4144510 VDS201A17200 4140250 VDS401A17200 17,200 .6772 51 73 3,0 123 48 18
4144511 VDS201A17300 4140251 VDS401A17300 17,300 .6811 51 73 3,0 123 48 18
4144512 VDS201A17400 4140252 VDS401A17400 17,400 .6850 51 73 3,0 123 48 18
4144513 VDS201A17463 4140253 VDS401A17463 17,463 .6875 51 73 3,0 123 48 18
4144514 VDS201A17500 4140254 VDS401A17500 17,500 .6890 51 73 3,0 123 48 18
4144515 VDS201A17600 4140255 VDS401A17600 17,600 .6929 51 73 3,1 123 48 18
4144516 VDS201A17700 4140256 VDS401A17700 17,700 .6969 51 73 3,1 123 48 18
4144517 VDS201A17800 4140257 VDS401A17800 17,800 .7008 51 73 3,1 123 48 18
4144518 VDS201A17859 4140258 VDS401A17859 17,859 .7031 51 73 3,1 123 48 18
4144519 VDS201A17900 4140259 VDS401A17900 17,900 .7047 51 73 3,1 123 48 18
4144590 VDS201A18000 4140449 VDS401A18000 18,000 .7087 51 73 3,1 123 48 18
4144591 VDS201A18100 4140450 VDS401A18100 18,100 .7126 55 79 3,1 131 50 20
4144592 VDS201A18200 4140451 VDS401A18200 18,200 .7165 55 79 3,2 131 50 20
4144593 VDS201A18258 4140452 VDS401A18258 18,258 .7188 55 79 3,2 131 50 20
4144594 VDS201A18300 4140463 VDS401A18300 18,300 .7205 55 79 3,2 131 50 20
4144595 VDS201A18400 4140464 VDS401A18400 18,400 .7244 55 79 3,2 131 50 20
4144596 VDS201A18500 4140465 VDS401A18500 18,500 .7283 55 79 3,2 131 50 20
4144597 VDS201A18600 4140466 VDS401A18600 18,600 .7323 55 79 3,2 131 50 20
4144598 VDS201A18654 4140467 VDS401A18654 18,654 .7344 55 79 3,2 131 50 20
4144599 VDS201A18700 4140468 VDS401A18700 18,700 .7362 55 79 3,2 131 50 20
4144600 VDS201A18800 4140469 VDS401A18800 18,800 .7402 55 79 3,3 131 50 20
4144601 VDS201A18900 4140470 VDS401A18900 18,900 .7441 55 79 3,3 131 50 20
4144602 VDS201A19000 4140471 VDS401A19000 19,000 .7480 55 79 3,3 131 50 20
4144603 VDS201A19050 4140472 VDS401A19050 19,050 .7500 55 79 3,3 131 50 20
4144604 VDS201A19100 4140473 VDS401A19100 19,100 .7520 55 79 3,3 131 50 20
4144605 VDS201A19200 4140474 VDS401A19200 19,200 .7559 55 79 3,3 131 50 20
4144606 VDS201A19300 4140475 VDS401A19300 19,300 .7598 55 79 3,4 131 50 20
4144607 VDS201A19400 4140476 VDS401A19400 19,400 .7638 55 79 3,4 131 50 20
4144608 VDS201A19500 4140477 VDS401A19500 19,500 .7677 55 79 3,4 131 50 20
4144609 VDS201A19600 4140478 VDS401A19600 19,600 .7717 55 79 3,4 131 50 20
4144610 VDS201A19700 4140479 VDS401A19700 19,700 .7756 55 79 3,4 131 50 20
4144611 VDS201A19800 4140480 VDS401A19800 19,800 .7795 55 79 3,4 131 50 20
4144612 VDS201A19900 4140481 VDS401A19900 19,900 .7835 55 79 3,5 131 50 20
4144613 VDS201A20000 4140482 VDS401A20000 20,000 .7874 55 79 3,5 131 50 20
WID_Master16_Holemaking_SolidCarbideDrills_T014_T015_Metric_REBRAND.indd 14 10/29/15 1:21 PM
T15
LViWID M 16 H l ki S lidC bid D ill T014 T015 M i REBRANDO b 1520153 15PM
widia.com
Solid Carbide Drills
VariDrill™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 5 x D
VDS202A • VDS402A • 5 x D
VDS202A • WU25PD VDS402A • WU25PD
rst choice
alternate choice
(continued)
Solid Carbide Drills
For information on L, L3, and L4 max, see page T143.
D1 diameter
grade WU25PD
TiAlN
order # catalogue #
grade WU25PD
TiAlN
order # catalogue # mm in L4 max L3 L5 L LS D
4148000 VDS202A01000 – 1,000 .0394 6 9 0,1 58 28 4
4148001 VDS202A01016 – 1,016 .0400 6 9 0,1 58 28 4
4148002 VDS202A01041 – 1,041 .0410 6 9 0,2 58 28 4
4148003 VDS202A01067 – 1,067 .0420 6 9 0,2 58 28 4
4148004 VDS202A01092 – 1,092 .0430 6 9 0,2 58 28 4
4148005 VDS202A01100 – 1,100 .0433 6 9 0,2 58 28 4
4148006 VDS202A01181 – 1,181 .0465 6 9 0,2 58 28 4
4148007 VDS202A01191 – 1,191 .0469 6 9 0,2 58 28 4
4148008 VDS202A01200 – 1,200 .0472 6 9 0,2 58 28 4
4148009 VDS202A01300 – 1,300 .0512 6 9 0,2 58 28 4
4148010 VDS202A01321 – 1,321 .0520 6 9 0,2 58 28 4
4148011 VDS202A01397 – 1,397 .0550 6 9 0,2 58 28 4
4148012 VDS202A01400 – 1,400 .0551 6 9 0,2 58 28 4
4148013 VDS202A01500 4142871 VDS402A01500 1,500 .0591 9 12 0,2 58 40 4
4148014 VDS202A01600 4142884 VDS402A01600 1,600 .0630 9 12 0,2 58 28 4
4148015 VDS202A01700 4142887 VDS402A01700 1,700 .0669 9 12 0,3 58 28 4
4148016 VDS202A01800 4142890 VDS402A01800 1,800 .0709 9 12 0,3 58 28 4
4148017 VDS202A01900 4142893 VDS402A01900 1,900 .0748 9 12 0,3 58 28 4
4148018 VDS202A01984 4142896 VDS402A01984 1,984 .0781 14 18 0,3 58 28 4
4148019 VDS202A02000 4142899 VDS402A02000 2,000 .0787 14 18 0,3 58 28 4
4148020 VDS202A02100 4142902 VDS402A02100 2,100 .0827 14 18 0,3 58 28 4
4148021 VDS202A02200 4142905 VDS402A02200 2,200 .0866 14 18 0,3 58 28 4
4148022 VDS202A02300 4142908 VDS402A02300 2,300 .0906 14 18 0,4 58 28 4
4148023 VDS202A02383 4142911 VDS402A02383 2,383 .0938 17 22 0,4 58 28 4
WID_Master16_Holemaking_SolidCarbideDrills_T014_T015_Metric_REBRAND.indd 15 10/29/15 1:21 PM
T16
LViWID M 16 H l ki S lidC bid D ill T016 T017 M i REBRANDO b 15 20153 16PM
widia.com
(continued)
(VDS202A • VDS402A • 5 x D — continued)
rst choice
alternate choice
Solid Carbide Drills
VariDrill™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 5 x D
Solid Carbide Drills
VDS202A • WU25PD VDS402A • WU25PD
D1 diameter
grade WU25PD
TiAlN
order # catalogue #
grade WU25PD
TiAlN
order # catalogue # mm in L4 max L3 L5 L LS D
4148024 VDS202A02400 4142924 VDS402A02400 2,400 .0945 17 22 0,4 58 28 4
4148025 VDS202A02439 4142927 VDS402A02439 2,439 .0960 17 22 0,4 58 28 4
4148026 VDS202A02489 4142930 VDS402A02489 2,489 .0980 17 22 0,4 58 28 4
4148027 VDS202A02500 4142933 VDS402A02500 2,500 .0984 17 22 0,4 58 28 4
4148028 VDS202A02578 4142936 VDS402A02578 2,578 .1015 17 22 0,4 58 28 4
4148029 VDS202A02600 4142939 VDS402A02600 2,600 .1024 17 22 0,4 58 28 4
4148030 VDS202A02642 4142942 VDS402A02642 2,642 .1040 17 22 0,4 58 28 4
4148031 VDS202A02700 4142945 VDS402A02700 2,700 .1063 17 22 0,4 58 28 4
4148032 VDS202A02705 4142948 VDS402A02705 2,705 .1065 17 22 0,4 58 28 4
4148033 VDS202A02779 4142951 VDS402A02779 2,779 .1094 17 22 0,4 58 28 4
4148034 VDS202A02800 4142964 VDS402A02800 2,800 .1102 17 22 0,5 58 28 4
4148035 VDS202A02820 4142967 VDS402A02820 2,820 .1110 17 22 0,5 58 28 4
4148036 VDS202A02870 4142970 VDS402A02870 2,870 .1130 17 22 0,5 58 28 4
4148037 VDS202A02900 4142973 VDS402A02900 2,900 .1142 17 22 0,5 58 28 4
4148038 VDS202A02947 4142976 VDS402A02947 2,947 .1160 17 22 0,5 58 28 4
4148142 VDS202A03000 4142844 VDS402A03000 3,000 .1181 23 28 0,5 66 36 6
4148143 VDS202A03048 4142846 VDS402A03048 3,048 .1200 23 28 0,5 66 36 6
4148144 VDS202A03100 4142847 VDS402A03100 3,100 .1220 23 28 0,5 66 36 6
4148145 VDS202A03175 4142849 VDS402A03175 3,175 .1250 23 28 0,5 66 36 6
4148146 VDS202A03200 4142851 VDS402A03200 3,200 .1260 23 28 0,5 66 36 6
4148147 VDS202A03264 4142864 VDS402A03264 3,264 .1285 23 28 0,5 66 36 6
4148148 VDS202A03300 4142865 VDS402A03300 3,300 .1299 23 28 0,5 66 36 6
4148149 VDS202A03400 4142867 VDS402A03400 3,400 .1339 23 28 0,6 66 36 6
4148150 VDS202A03455 4142869 VDS402A03455 3,455 .1360 23 28 0,6 66 36 6
4148151 VDS202A03500 4142872 VDS402A03500 3,500 .1378 23 28 0,6 66 36 6
4148152 VDS202A03571 4142885 VDS402A03571 3,571 .1406 23 28 0,6 66 36 6
4148153 VDS202A03600 4142888 VDS402A03600 3,600 .1417 23 28 0,6 66 36 6
4148154 VDS202A03658 4142891 VDS402A03658 3,658 .1440 23 28 0,6 66 36 6
4148155 VDS202A03700 4142894 VDS402A03700 3,700 .1457 23 28 0,6 66 36 6
4148156 VDS202A03734 4142897 VDS402A03734 3,734 .1470 23 28 0,6 66 36 6
4148157 VDS202A03800 4142900 VDS402A03800 3,800 .1496 29 36 0,6 74 36 6
4148158 VDS202A03900 4142903 VDS402A03900 3,900 .1535 29 36 0,6 74 36 6
4148159 VDS202A03970 4142906 VDS402A03970 3,970 .1563 29 36 0,7 74 36 6
4148160 VDS202A04000 4142909 VDS402A04000 4,000 .1575 29 36 0,7 74 36 6
4148161 VDS202A04039 4142912 VDS402A04039 4,039 .1590 29 36 0,7 74 36 6
4148162 VDS202A04090 4142925 VDS402A04090 4,090 .1610 29 36 0,7 74 36 6
4148163 VDS202A04100 4142928 VDS402A04100 4,100 .1614 29 36 0,7 74 36 6
4148164 VDS202A04200 4142931 VDS402A04200 4,200 .1654 29 36 0,7 74 36 6
4148165 VDS202A04217 4142934 VDS402A04217 4,217 .1660 29 36 0,7 74 36 6
4148166 VDS202A04300 4142937 VDS402A04300 4,300 .1693 29 36 0,7 74 36 6
WID_Master16_Holemaking_SolidCarbideDrills_T016_T017_Metric_REBRAND.indd 16 10/29/15 1:21 PM
T17
LViWID M 16 H l ki S lidC bid D ill T016 T017 M i REBRANDO b 1520153 16PM
widia.com
(continued)
(VDS202A • VDS402A • 5 x D — continued)
rst choice
alternate choice
Solid Carbide Drills
VariDrill™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 5 x D
Solid Carbide Drills
VDS202A • WU25PD VDS402A • WU25PD
D1 diameter
grade WU25PD
TiAlN
order # catalogue #
grade WU25PD
TiAlN
order # catalogue # mm in L4 max L3 L5 L LS D
4148167 VDS202A04366 4142940 VDS402A04366 4,366 .1719 29 36 0,7 74 36 6
4148168 VDS202A04400 4142943 VDS402A04400 4,400 .1732 29 36 0,7 74 36 6
4148169 VDS202A04500 4142946 VDS402A04500 4,500 .1772 29 36 0,7 74 36 6
4148170 VDS202A04600 4142949 VDS402A04600 4,600 .1811 29 36 0,8 74 36 6
4148171 VDS202A04623 4142952 VDS402A04623 4,623 .1820 29 36 0,8 74 36 6
4148172 VDS202A04700 4142965 VDS402A04700 4,700 .1850 29 36 0,8 74 36 6
4148173 VDS202A04763 4142968 VDS402A04763 4,763 .1875 35 44 0,8 82 36 6
4148174 VDS202A04800 4142971 VDS402A04800 4,800 .1890 35 44 0,8 82 36 6
4148175 VDS202A04852 4142974 VDS402A04852 4,852 .1910 35 44 0,8 82 36 6
4148176 VDS202A04900 4142977 VDS402A04900 4,900 .1929 35 44 0,8 82 36 6
4148177 VDS202A05000 4142979 VDS402A05000 5,000 .1969 35 44 0,8 82 36 6
4148178 VDS202A05100 4142981 VDS402A05100 5,100 .2008 35 44 0,8 82 36 6
4148179 VDS202A05106 4142994 VDS402A05106 5,106 .2010 35 44 0,8 82 36 6
4148180 VDS202A05159 4142996 VDS402A05159 5,159 .2031 35 44 0,9 82 36 6
4148181 VDS202A05200 4142997 VDS402A05200 5,200 .2047 35 44 0,9 82 36 6
4148182 VDS202A05300 4142999 VDS402A05300 5,300 .2087 35 44 0,9 82 36 6
4148183 VDS202A05400 4143000 VDS402A05400 5,400 .2126 35 44 0,9 82 36 6
4148184 VDS202A05410 4143001 VDS402A05410 5,410 .2130 35 44 0,9 82 36 6
4148185 VDS202A05500 4143002 VDS402A05500 5,500 .2165 35 44 0,9 82 36 6
4148186 VDS202A05558 4143003 VDS402A05558 5,558 .2188 35 44 0,9 82 36 6
4148187 VDS202A05600 4143004 VDS402A05600 5,600 .2205 35 44 0,9 82 36 6
4148188 VDS202A05616 4143005 VDS402A05616 5,616 .2211 35 44 0,9 82 36 6
4148189 VDS202A05700 4143006 VDS402A05700 5,700 .2244 35 44 1,0 82 36 6
4148190 VDS202A05800 4143007 VDS402A05800 5,800 .2283 35 44 1,0 82 36 6
4148191 VDS202A05900 4143008 VDS402A05900 5,900 .2323 35 44 1,0 82 36 6
4148192 VDS202A05954 4143009 VDS402A05954 5,954 .2344 35 44 1,0 82 36 6
4148193 VDS202A06000 4143010 VDS402A06000 6,000 .2362 35 44 1,0 82 36 6
4148194 VDS202A06100 4143011 VDS402A06100 6,100 .2402 43 53 1,0 91 36 8
4148195 VDS202A06200 4143012 VDS402A06200 6,200 .2441 43 53 1,0 91 36 8
4148196 VDS202A06300 4143023 VDS402A06300 6,300 .2480 43 53 1,1 91 36 8
4148197 VDS202A06350 4143024 VDS402A06350 6,350 .2500 43 53 1,1 91 36 8
4148198 VDS202A06400 4143025 VDS402A06400 6,400 .2520 43 53 1,1 91 36 8
4148199 VDS202A06500 4143026 VDS402A06500 6,500 .2559 43 53 1,1 91 36 8
4148200 VDS202A06528 4143027 VDS402A06528 6,528 .2570 43 53 1,1 91 36 8
4148201 VDS202A06600 4143028 VDS402A06600 6,600 .2598 43 53 1,1 91 36 8
4148202 VDS202A06630 4143029 VDS402A06630 6,630 .2610 43 53 1,1 91 36 8
4148203 VDS202A06700 4143030 VDS402A06700 6,700 .2638 43 53 1,1 91 36 8
4148204 VDS202A06746 4143031 VDS402A06746 6,746 .2656 43 53 1,1 91 36 8
4148205 VDS202A06800 4143032 VDS402A06800 6,800 .2677 43 53 1,1 91 36 8
4148206 VDS202A06900 4143043 VDS402A06900 6,900 .2717 43 53 1,2 91 36 8
WID_Master16_Holemaking_SolidCarbideDrills_T016_T017_Metric_REBRAND.indd 17 10/29/15 1:21 PM
T18
LViWID M 16 H l ki S lidC bid D ill T018 T019 M i REBRANDO b 15 20153 16PM
widia.com
(continued)
(VDS202A • VDS402A • 5 x D — continued)
rst choice
alternate choice
Solid Carbide Drills
VariDrill™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 5 x D
Solid Carbide Drills
VDS202A • WU25PD VDS402A • WU25PD
D1 diameter
grade WU25PD
TiAlN
order # catalogue #
grade WU25PD
TiAlN
order # catalogue # mm in L4 max L3 L5 L LS D
4148207 VDS202A07000 4143044 VDS402A07000 7,000 .2756 43 53 1,2 91 36 8
4148208 VDS202A07100 4143045 VDS402A07100 7,100 .2795 43 53 1,2 91 36 8
4148209 VDS202A07145 4143046 VDS402A07145 7,145 .2813 43 53 1,2 91 36 8
4148210 VDS202A07200 4143047 VDS402A07200 7,200 .2835 43 53 1,2 91 36 8
4148211 VDS202A07300 4143048 VDS402A07300 7,300 .2874 43 53 1,2 91 36 8
4148212 VDS202A07400 4143049 VDS402A07400 7,400 .2913 43 53 1,3 91 36 8
4148213 VDS202A07500 4143050 VDS402A07500 7,500 .2953 43 53 1,3 91 36 8
4148214 VDS202A07541 4143051 VDS402A07541 7,541 .2969 43 53 1,3 91 36 8
4148215 VDS202A07600 4143052 VDS402A07600 7,600 .2992 43 53 1,3 91 36 8
4148216 VDS202A07700 4143063 VDS402A07700 7,700 .3031 43 53 1,3 91 36 8
4148217 VDS202A07800 4143064 VDS402A07800 7,800 .3071 43 53 1,3 91 36 8
4148218 VDS202A07900 4143065 VDS402A07900 7,900 .3110 43 53 1,3 91 36 8
4148219 VDS202A07938 4143066 VDS402A07938 7,938 .3125 43 53 1,3 91 36 8
4148220 VDS202A08000 4143067 VDS402A08000 8,000 .3150 43 53 1,4 91 36 8
4148221 VDS202A08100 4143068 VDS402A08100 8,100 .3189 49 61 1,4 103 40 10
4148222 VDS202A08200 4143069 VDS402A08200 8,200 .3228 49 61 1,4 103 40 10
4148223 VDS202A08300 4143070 VDS402A08300 8,300 .3268 49 61 1,4 103 40 10
4148224 VDS202A08334 4143071 VDS402A08334 8,334 .3281 49 61 1,4 103 40 10
4148225 VDS202A08400 4143072 VDS402A08400 8,400 .3307 49 61 1,4 103 40 10
4148226 VDS202A08433 4143083 VDS402A08433 8,433 .3320 49 61 1,4 103 40 10
4148227 VDS202A08500 4143084 VDS402A08500 8,500 .3346 49 61 1,4 103 40 10
4148228 VDS202A08600 4143085 VDS402A08600 8,600 .3386 49 61 1,5 103 40 10
4148229 VDS202A08700 4143086 VDS402A08700 8,700 .3425 49 61 1,5 103 40 10
4148230 VDS202A08733 4143087 VDS402A08733 8,733 .3438 49 61 1,5 103 40 10
4148231 VDS202A08800 4143088 VDS402A08800 8,800 .3465 49 61 1,5 103 40 10
4148232 VDS202A08900 4143089 VDS402A08900 8,900 .3504 49 61 1,5 103 40 10
4148233 VDS202A09000 4143090 VDS402A09000 9,000 .3543 49 61 1,5 103 40 10
4148234 VDS202A09100 4143091 VDS402A09100 9,100 .3583 49 61 1,5 103 40 10
4148235 VDS202A09129 4143092 VDS402A09129 9,129 .3594 49 61 1,6 103 40 10
4148236 VDS202A09200 4143103 VDS402A09200 9,200 .3622 49 61 1,6 103 40 10
4148237 VDS202A09300 4143104 VDS402A09300 9,300 .3661 49 61 1,6 103 40 10
4148238 VDS202A09347 4143105 VDS402A09347 9,347 .3680 49 61 1,6 103 40 10
4148239 VDS202A09400 4143106 VDS402A09400 9,400 .3701 49 61 1,6 103 40 10
4148240 VDS202A09500 4143107 VDS402A09500 9,500 .3740 49 61 1,6 103 40 10
4148241 VDS202A09525 4143108 VDS402A09525 9,525 .3750 49 61 1,6 103 40 10
4148242 VDS202A09600 4143109 VDS402A09600 9,600 .3780 49 61 1,6 103 40 10
4148243 VDS202A09700 4143110 VDS402A09700 9,700 .3819 49 61 1,7 103 40 10
4148244 VDS202A09800 4143111 VDS402A09800 9,800 .3858 49 61 1,7 103 40 10
4148245 VDS202A09900 4143112 VDS402A09900 9,900 .3898 49 61 1,7 103 40 10
4148246 VDS202A09921 4143113 VDS402A09921 9,921 .3906 49 61 1,7 103 40 10
WID_Master16_Holemaking_SolidCarbideDrills_T018_T019_Metric_REBRAND.indd 18 10/29/15 1:21 PM
T19
LViWID M 16 H l ki S lidC bid D ill T018 T019 M i REBRANDO b 1520153 16PM
widia.com
(continued)
(VDS202A • VDS402A • 5 x D — continued)
rst choice
alternate choice
Solid Carbide Drills
VariDrill™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 5 x D
Solid Carbide Drills
VDS202A • WU25PD VDS402A • WU25PD
D1 diameter
grade WU25PD
TiAlN
order # catalogue #
grade WU25PD
TiAlN
order # catalogue # mm in L4 max L3 L5 L LS D
4148258 VDS202A10000 4142823 VDS402A10000 10,000 .3937 49 61 1,7 103 40 10
4148259 VDS202A10100 4142825 VDS402A10100 10,100 .3976 56 71 1,7 118 45 12
4148260 VDS202A10200 4142827 VDS402A10200 10,200 .4016 56 71 1,7 118 45 12
4148261 VDS202A10300 4142829 VDS402A10300 10,300 .4055 56 71 1,8 118 45 12
4148262 VDS202A10320 4142831 VDS402A10320 10,320 .4063 56 71 1,8 118 45 12
4148283 VDS202A10400 4142832 VDS402A10400 10,400 .4094 56 71 1,8 118 45 12
4148284 VDS202A10500 4142834 VDS402A10500 10,500 .4134 56 71 1,8 118 45 12
4148285 VDS202A10600 4142836 VDS402A10600 10,600 .4173 56 71 1,8 118 45 12
4148286 VDS202A10700 4142838 VDS402A10700 10,700 .4213 56 71 1,8 118 45 12
4148287 VDS202A10716 4142840 VDS402A10716 10,716 .4219 56 71 1,8 118 45 12
4148288 VDS202A10800 4142842 VDS402A10800 10,800 .4252 56 71 1,8 118 45 12
4148289 VDS202A10900 4142855 VDS402A10900 10,900 .4291 56 71 1,9 118 45 12
4148290 VDS202A11000 4142857 VDS402A11000 11,000 .4331 56 71 1,9 118 45 12
4148291 VDS202A11100 4142858 VDS402A11100 11,100 .4370 56 71 1,9 118 45 12
4148292 VDS202A11113 4142861 VDS402A11113 11,113 .4375 56 71 1,9 118 45 12
4148293 VDS202A11200 4142862 VDS402A11200 11,200 .4409 56 71 1,9 118 45 12
4148294 VDS202A11300 4142873 VDS402A11300 11,300 .4449 56 71 1,9 118 45 12
4148295 VDS202A11400 4142874 VDS402A11400 11,400 .4488 56 71 2,0 118 45 12
4148296 VDS202A11500 4142875 VDS402A11500 11,500 .4528 56 71 2,0 118 45 12
4148297 VDS202A11509 4142876 VDS402A11509 11,509 .4531 56 71 2,0 118 45 12
4148298 VDS202A11600 4142877 VDS402A11600 11,600 .4567 56 71 2,0 118 45 12
4148299 VDS202A11700 4142878 VDS402A11700 11,700 .4606 56 71 2,0 118 45 12
4148300 VDS202A11800 4142879 VDS402A11800 11,800 .4646 56 71 2,0 118 45 12
4148301 VDS202A11900 4142880 VDS402A11900 11,900 .4685 56 71 2,0 118 45 12
4148302 VDS202A11908 4142881 VDS402A11908 11,908 .4688 56 71 2,0 118 45 12
4148313 VDS202A12000 4142882 VDS402A12000 12,000 .4724 56 71 2,1 118 45 12
4148314 VDS202A12100 4142913 VDS402A12100 12,100 .4764 60 77 2,1 124 45 14
4148315 VDS202A12200 4142914 VDS402A12200 12,200 .4803 60 77 2,1 124 45 14
4148316 VDS202A12300 4142915 VDS402A12300 12,300 .4843 60 77 2,1 124 45 14
4148317 VDS202A12304 4142916 VDS402A12304 12,304 .4844 60 77 2,1 124 45 14
4148318 VDS202A12400 4142917 VDS402A12400 12,400 .4882 60 77 2,1 124 45 14
4148319 VDS202A12500 4142918 VDS402A12500 12,500 .4921 60 77 2,1 124 45 14
4148320 VDS202A12600 4142919 VDS402A12600 12,600 .4961 60 77 2,2 124 45 14
4148321 VDS202A12700 4142920 VDS402A12700 12,700 .5000 60 77 2,2 124 45 14
4148322 VDS202A12800 4142921 VDS402A12800 12,800 .5039 60 77 2,2 124 45 14
4148343 VDS202A12900 4142922 VDS402A12900 12,900 .5079 60 77 2,2 124 45 14
4148344 VDS202A13000 4142953 VDS402A13000 13,000 .5118 60 77 2,2 124 45 14
4148345 VDS202A13096 4142954 VDS402A13096 13,096 .5156 60 77 2,3 124 45 14
4148346 VDS202A13100 4142955 VDS402A13100 13,100 .5157 60 77 2,3 124 45 14
4148347 VDS202A13200 4142956 VDS402A13200 13,200 .5197 60 77 2,3 124 45 14
WID_Master16_Holemaking_SolidCarbideDrills_T018_T019_Metric_REBRAND.indd 19 10/29/15 1:21 PM
T20
LViWID M 16 H l ki S lidC bid D ill T020 T021 M i REBRANDO b 15 20153 17PM
widia.com
(VDS202A • VDS402A • 5 x D — continued)
(continued)
rst choice
alternate choice
Solid Carbide Drills
VariDrill™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 5 x D
Solid Carbide Drills
VDS202A • WU25PD VDS402A • WU25PD
D1 diameter
grade WU25PD
TiAlN
order # catalogue #
grade WU25PD
TiAlN
order # catalogue # mm in L4 max L3 L5 L LS D
4148348 VDS202A13300 4142957 VDS402A13300 13,300 .5236 60 77 2,3 124 45 14
4148349 VDS202A13400 4142958 VDS402A13400 13,400 .5276 60 77 2,3 124 45 14
4148350 VDS202A13500 4142959 VDS402A13500 13,500 .5315 60 77 2,3 124 45 14
4148351 VDS202A13600 4142960 VDS402A13600 13,600 .5354 60 77 2,3 124 45 14
4148352 VDS202A13700 4142961 VDS402A13700 13,700 .5394 60 77 2,4 124 45 14
4148353 VDS202A13800 4142962 VDS402A13800 13,800 .5433 60 77 2,4 124 45 14
4148354 VDS202A13891 4142983 VDS402A13891 13,891 .5469 60 77 2,4 124 45 14
4148355 VDS202A13900 4142984 VDS402A13900 13,900 .5472 60 77 2,4 124 45 14
4148356 VDS202A14000 4142985 VDS402A14000 14,000 .5512 60 77 2,4 124 45 14
4148357 VDS202A14100 4142986 VDS402A14100 14,100 .5551 63 83 2,4 133 48 16
4148358 VDS202A14200 4142987 VDS402A14200 14,200 .5591 63 83 2,5 133 48 16
4148359 VDS202A14288 4142988 VDS402A14288 14,288 .5625 63 83 2,5 133 48 16
4148360 VDS202A14300 4142989 VDS402A14300 14,300 .5630 63 83 2,5 133 48 16
4148361 VDS202A14400 4142990 VDS402A14400 14,400 .5669 63 83 2,5 133 48 16
4148362 VDS202A14500 4142991 VDS402A14500 14,500 .5709 63 83 2,5 133 48 16
4148363 VDS202A14600 4142992 VDS402A14600 14,600 .5748 63 83 2,5 133 48 16
4148364 VDS202A14684 4143013 VDS402A14684 14,684 .5781 63 83 2,5 133 48 16
4148365 VDS202A14700 4143014 VDS402A14700 14,700 .5787 63 83 2,5 133 48 16
4148366 VDS202A14800 4143015 VDS402A14800 14,800 .5827 63 83 2,6 133 48 16
4148367 VDS202A14900 4143016 VDS402A14900 14,900 .5866 63 83 2,6 133 48 16
4148368 VDS202A15000 4143017 VDS402A15000 15,000 .5906 63 83 2,6 133 48 16
4148369 VDS202A15083 4143018 VDS402A15083 15,083 .5938 63 83 2,6 133 48 16
4148370 VDS202A15100 4143019 VDS402A15100 15,100 .5945 63 83 2,6 133 48 16
4148371 VDS202A15200 4143020 VDS402A15200 15,200 .5984 63 83 2,6 133 48 16
4148372 VDS202A15300 4143021 VDS402A15300 15,300 .6024 63 83 2,6 133 48 16
4148373 VDS202A15400 4143022 VDS402A15400 15,400 .6063 63 83 2,7 133 48 16
4148374 VDS202A15479 4143033 VDS402A15479 15,479 .6094 63 83 2,7 133 48 16
4148375 VDS202A15500 4143034 VDS402A15500 15,500 .6102 63 83 2,7 133 48 16
4148376 VDS202A15600 4143035 VDS402A15600 15,600 .6142 63 83 2,7 133 48 16
4148377 VDS202A15700 4143036 VDS402A15700 15,700 .6181 63 83 2,7 133 48 16
4148378 VDS202A15800 4143037 VDS402A15800 15,800 .6220 63 83 2,7 133 48 16
4148379 VDS202A15875 4143038 VDS402A15875 15,875 .6250 63 83 2,7 133 48 16
4148380 VDS202A15900 4143039 VDS402A15900 15,900 .6260 63 83 2,8 133 48 16
4148381 VDS202A16000 4143040 VDS402A16000 16,000 .6299 63 83 2,8 133 48 16
4148382 VDS202A16100 4143041 VDS402A16100 16,100 .6339 71 93 2,8 143 48 18
4148383 VDS202A16200 4143042 VDS402A16200 16,200 .6378 71 93 2,8 143 48 18
4148384 VDS202A16271 4143053 VDS402A16271 16,271 .6406 71 93 2,8 143 48 18
4148385 VDS202A16300 4143054 VDS402A16300 16,300 .6417 71 93 2,8 143 48 18
4148386 VDS202A16400 4143055 VDS402A16400 16,400 .6457 71 93 2,8 143 48 18
4148387 VDS202A16500 4143056 VDS402A16500 16,500 .6496 71 93 2,9 143 48 18
WID_Master16_Holemaking_SolidCarbideDrills_T020_T021_Metric_REBRAND.indd 20 10/29/15 1:21 PM
T21
LViWID M 16 H l ki S lidC bid D ill T020 T021 M i REBRANDO b 1520153 17PM
widia.com
(VDS202A • VDS402A • 5 x D — continued)
rst choice
alternate choice
Solid Carbide Drills
VariDrill™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 5 x D
Solid Carbide Drills
VDS202A • WU25PD VDS402A • WU25PD
D1 diameter
grade WU25PD
TiAlN
order # catalogue #
grade WU25PD
TiAlN
order # catalogue # mm in L4 max L3 L5 L LS D
4148388 VDS202A16600 4143057 VDS402A16600 16,600 .6535 71 93 2,9 143 48 18
4148389 VDS202A16670 4143058 VDS402A16670 16,670 .6563 71 93 2,9 143 48 18
4148390 VDS202A16700 4143059 VDS402A16700 16,700 .6575 71 93 2,9 143 48 18
4148391 VDS202A16800 4143060 VDS402A16800 16,800 .6614 71 93 2,9 143 48 18
4148392 VDS202A16900 4143061 VDS402A16900 16,900 .6654 71 93 2,9 143 48 18
4148393 VDS202A17000 4143062 VDS402A17000 17,000 .6693 71 93 2,9 143 48 18
4148394 VDS202A17100 4143073 VDS402A17100 17,100 .6732 71 93 3,0 143 48 18
4148395 VDS202A17200 4143074 VDS402A17200 17,200 .6772 71 93 3,0 143 48 18
4148396 VDS202A17300 4143075 VDS402A17300 17,300 .6811 71 93 3,0 143 48 18
4148397 VDS202A17400 4143076 VDS402A17400 17,400 .6850 71 93 3,0 143 48 18
4148398 VDS202A17463 4143077 VDS402A17463 17,463 .6875 71 93 3,0 143 48 18
4148399 VDS202A17500 4143078 VDS402A17500 17,500 .6890 71 93 3,0 143 48 18
4148400 VDS202A17600 4143079 VDS402A17600 17,600 .6929 71 93 3,1 143 48 18
4148401 VDS202A17700 4143080 VDS402A17700 17,700 .6969 71 93 3,1 143 48 18
4148402 VDS202A17800 4143081 VDS402A17800 17,800 .7008 71 93 3,1 143 48 18
4148403 VDS202A17859 4143082 VDS402A17859 17,859 .7031 71 93 3,1 143 48 18
4148404 VDS202A17900 4143093 VDS402A17900 17,900 .7047 71 93 3,1 143 48 18
4147921 VDS202A18000 4142803 VDS402A18000 18,000 .7087 71 93 3,1 143 48 18
4147922 VDS202A18100 4142804 VDS402A18100 18,100 .7126 77 101 3,1 153 50 20
4148303 VDS202A18200 4142805 VDS402A18200 18,200 .7165 77 101 3,2 153 50 20
4148304 VDS202A18258 4142806 VDS402A18258 18,258 .7188 77 101 3,2 153 50 20
4148305 VDS202A18300 4142807 VDS402A18300 18,300 .7205 77 101 3,2 153 50 20
4148306 VDS202A18400 4142808 VDS402A18400 18,400 .7244 77 101 3,2 153 50 20
4148307 VDS202A18500 4142809 VDS402A18500 18,500 .7283 77 101 3,2 153 50 20
4148308 VDS202A18600 4142810 VDS402A18600 18,600 .7323 77 101 3,2 153 50 20
4148309 VDS202A18654 4142811 VDS402A18654 18,654 .7344 77 101 3,2 153 50 20
4148310 VDS202A18700 4142812 VDS402A18700 18,700 .7362 77 101 3,2 153 50 20
4148311 VDS202A18800 4142824 VDS402A18800 18,800 .7402 77 101 3,3 153 50 20
4148312 VDS202A18900 4142826 VDS402A18900 18,900 .7441 77 101 3,3 153 50 20
4148323 VDS202A19000 4142828 VDS402A19000 19,000 .7480 77 101 3,3 153 50 20
4148324 VDS202A19050 4142830 VDS402A19050 19,050 .7500 77 101 3,3 153 50 20
4148325 VDS202A19100 4142833 VDS402A19100 19,100 .7520 77 101 3,3 153 50 20
4148326 VDS202A19200 4142835 VDS402A19200 19,200 .7559 77 101 3,3 153 50 20
4148327 VDS202A19300 4142837 VDS402A19300 19,300 .7598 77 101 3,4 153 50 20
4148328 VDS202A19400 4142839 VDS402A19400 19,400 .7638 77 101 3,4 153 50 20
4148329 VDS202A19500 4142841 VDS402A19500 19,500 .7677 77 101 3,4 153 50 20
4148330 VDS202A19600 4142853 VDS402A19600 19,600 .7717 77 101 3,4 153 50 20
4148331 VDS202A19700 4142854 VDS402A19700 19,700 .7756 77 101 3,4 153 50 20
4148332 VDS202A19800 4142856 VDS402A19800 19,800 .7795 77 101 3,4 153 50 20
4148333 VDS202A19900 4142859 VDS402A19900 19,900 .7835 77 101 3,5 153 50 20
4148334 VDS202A20000 4142860 VDS402A20000 20,000 .7874 77 101 3,5 153 50 20
WID_Master16_Holemaking_SolidCarbideDrills_T020_T021_Metric_REBRAND.indd 21 10/29/15 1:21 PM
T22
LViWID M 16 H l ki S lidC bid D ill T022 T023 M i REBRANDO b 15 20153 18PM
widia.com
Solid Carbide Drills
VariDrill™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 8 x D
VDS403A • 8 x D
WU25PD
rst choice
alternate choice
(continued)
For information on L, L3, and L4 max, see page T143.
Solid Carbide Drills
D1 diameter
grade WU25PD
TiAlN
order # catalogue # mm in L4 max L3 L5 L LS D
6023126 VDS403A01000 1,000 .0394 10 12 0,1 58 28 4
6023127 VDS403A01016 1,016 .0400 10 12 0,1 58 28 4
6023128 VDS403A01067 1,067 .0420 10 12 0,2 58 28 4
6023129 VDS403A01100 1,100 .0433 10 12 0,2 58 28 4
6023130 VDS403A01181 1,181 .0465 10 12 0,2 58 28 4
6023131 VDS403A01191 1,191 .0469 10 12 0,2 58 28 4
6023132 VDS403A01200 1,200 .0472 10 12 0,2 58 28 4
6023133 VDS403A01300 1,300 .0512 10 12 0,2 58 28 4
6023134 VDS403A01321 1,321 .0520 10 12 0,2 58 28 4
6023135 VDS403A01397 1,397 .0550 10 12 0,2 58 28 4
6023136 VDS403A01400 1,400 .0551 10 12 0,2 58 28 4
4143700 VDS403A01500 1,500 .0591 15 18 0,2 58 28 4
4143701 VDS403A01600 1,600 .0630 15 18 0,2 58 28 4
4143702 VDS403A01700 1,700 .0669 15 18 0,3 58 28 4
4143723 VDS403A01800 1,800 .0709 15 18 0,3 58 28 4
4143724 VDS403A01900 1,900 .0748 15 18 0,3 58 28 4
4143725 VDS403A01984 1,984 .0781 22 26 0,3 66 28 4
4143726 VDS403A02000 2,000 .0787 22 26 0,3 66 28 4
4143727 VDS403A02100 2,100 .0827 22 26 0,3 66 28 4
4143728 VDS403A02200 2,200 .0866 22 26 0,3 66 28 4
4143729 VDS403A02300 2,300 .0906 22 26 0,4 66 28 4
4143730 VDS403A02383 2,383 .0938 25 30 0,4 66 28 4
4143731 VDS403A02400 2,400 .0945 25 30 0,4 66 28 4
4143732 VDS403A02439 2,439 .0960 25 30 0,4 66 28 4
4143733 VDS403A02489 2,489 .0980 25 30 0,4 66 28 4
4143734 VDS403A02500 2,500 .0984 25 30 0,4 66 28 4
4143735 VDS403A02578 2,578 .1015 25 30 0,4 66 28 4
4143736 VDS403A02600 2,600 .1024 25 30 0,4 66 28 4
WID_Master16_Holemaking_SolidCarbideDrills_T022_T023_Metric_REBRAND.indd 22 10/29/15 1:21 PM
T23
LViWID M 16 H l ki S lidC bid D ill T022 T023 M i REBRANDO b 1520153 18PM
widia.com
(continued)
(VDS403A • 8 x D — continued)
rst choice
alternate choice
Solid Carbide Drills
VariDrill™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 8 x D
Solid Carbide Drills
WU25PD
D1 diameter
grade WU25PD
TiAlN
order # catalogue # mm in L4 max L3 L5 L LS D
4143737 VDS403A02642 2,642 .1040 25 30 0,4 66 28 4
4143738 VDS403A02700 2,700 .1063 25 30 0,4 66 28 4
4143739 VDS403A02705 2,705 .1065 25 30 0,4 66 28 4
4143740 VDS403A02779 2,779 .1094 25 30 0,4 66 28 4
4143741 VDS403A02800 2,800 .1102 25 30 0,5 66 28 4
4143742 VDS403A02820 2,820 .1110 25 30 0,5 66 28 4
4143743 VDS403A02870 2,870 .1130 25 30 0,5 66 28 4
4143744 VDS403A02900 2,900 .1142 25 30 0,5 66 28 4
4143745 VDS403A02947 2,947 .1160 25 30 0,5 66 28 4
4143746 VDS403A03000 3,000 .1181 33 40 0,5 78 36 6
4143747 VDS403A03048 3,048 .1200 33 40 0,5 78 36 6
4143748 VDS403A03100 3,100 .1220 33 40 0,5 78 36 6
4143749 VDS403A03175 3,175 .1250 33 40 0,5 78 36 6
4143750 VDS403A03200 3,200 .1260 33 40 0,5 78 36 6
4143751 VDS403A03264 3,264 .1285 33 40 0,5 78 36 6
4143752 VDS403A03300 3,300 .1299 33 40 0,5 78 36 6
4143753 VDS403A03400 3,400 .1339 33 40 0,6 78 36 6
4143754 VDS403A03455 3,455 .1360 33 49 0,6 78 36 6
4143755 VDS403A03500 3,500 .1378 33 49 0,6 78 36 6
4143756 VDS403A03571 3,571 .1406 33 49 0,6 78 36 6
4143757 VDS403A03600 3,600 .1417 33 40 0,6 78 36 6
4143758 VDS403A03658 3,658 .1440 33 49 0,6 78 36 6
4143759 VDS403A03700 3,700 .1457 33 40 0,6 78 36 6
4143760 VDS403A03734 3,734 .1470 33 40 0,6 78 36 6
4143761 VDS403A03800 3,800 .1496 41 49 0,6 87 36 6
4143762 VDS403A03900 3,900 .1535 41 40 0,6 87 36 6
4143763 VDS403A03970 3,970 .1563 41 49 0,7 87 36 6
4143764 VDS403A04000 4,000 .1575 41 40 0,7 87 36 6
4143765 VDS403A04039 4,039 .1590 41 40 0,7 87 36 6
4143766 VDS403A04090 4,090 .1610 41 40 0,7 87 36 6
4143767 VDS403A04100 4,100 .1614 41 49 0,7 87 36 6
4143768 VDS403A04200 4,200 .1654 41 49 0,7 87 36 6
4143769 VDS403A04217 4,217 .1660 41 49 0,7 87 36 6
4143770 VDS403A04300 4,300 .1693 41 49 0,7 87 36 6
4143771 VDS403A04366 4,366 .1719 41 49 0,7 87 36 6
4143772 VDS403A04400 4,400 .1732 41 49 0,7 87 36 6
4143773 VDS403A04500 4,500 .1772 41 49 0,7 87 36 6
4143774 VDS403A04600 4,600 .1811 41 49 0,8 87 36 6
4143775 VDS403A04623 4,623 .1820 41 49 0,8 87 36 6
4143776 VDS403A04700 4,700 .1850 41 56 0,8 87 36 6
WID_Master16_Holemaking_SolidCarbideDrills_T022_T023_Metric_REBRAND.indd 23 10/29/15 1:21 PM
T24
LViWID M 16 H l ki S lidC bid D ill T024 T025 M i REBRANDO b 15 20153 19PM
widia.com
(VDS403A • 8 x D — continued)
(continued)
Solid Carbide Drills
VariDrill™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 8 x D
rst choice
alternate choice
Solid Carbide Drills
WU25PD
D1 diameter
grade WU25PD
TiAlN
order # catalogue # mm in L4 max L3 L5 L LS D
4143777 VDS403A04763 4,763 .1875 48 49 0,8 94 36 6
4143778 VDS403A04800 4,800 .1890 48 56 0,8 94 36 6
4143779 VDS403A04852 4,852 .1910 48 56 0,8 94 36 6
4143780 VDS403A04900 4,900 .1929 48 56 0,8 94 36 6
4143781 VDS403A05000 5,000 .1969 48 56 0,8 94 36 6
4143782 VDS403A05100 5,100 .2008 48 56 0,8 94 36 6
4143783 VDS403A05106 5,106 .2010 48 56 0,8 94 36 6
4143784 VDS403A05159 5,159 .2031 48 56 0,9 94 36 6
4143785 VDS403A05200 5,200 .2047 48 56 0,9 94 36 6
4143786 VDS403A05300 5,300 .2087 48 56 0,9 94 36 6
4143787 VDS403A05400 5,400 .2126 48 56 0,9 94 36 6
4143788 VDS403A05410 5,410 .2130 48 56 0,9 94 36 6
4143789 VDS403A05500 5,500 .2165 48 56 0,9 94 36 6
4143790 VDS403A05558 5,558 .2188 48 56 0,9 94 36 6
4143791 VDS403A05600 5,600 .2205 48 56 0,9 94 36 6
4143792 VDS403A05616 5,616 .2211 48 56 0,9 94 36 6
4143793 VDS403A05700 5,700 .2244 48 56 1,0 94 36 6
4143794 VDS403A05800 5,800 .2283 48 67 1,0 94 36 6
4143795 VDS403A05900 5,900 .2323 48 67 1,0 94 36 6
4143796 VDS403A05954 5,954 .2344 48 56 1,0 94 36 6
4143797 VDS403A06000 6,000 .2362 48 67 1,0 94 36 6
4143798 VDS403A06100 6,100 .2402 57 67 1,0 105 36 8
4143799 VDS403A06200 6,200 .2441 57 67 1,0 105 36 8
4143800 VDS403A06300 6,300 .2480 57 56 1,1 105 36 8
4143801 VDS403A06350 6,350 .2500 57 67 1,1 105 36 8
4143802 VDS403A06400 6,400 .2520 57 67 1,1 105 36 8
4143803 VDS403A06500 6,500 .2559 57 67 1,1 105 36 8
4143804 VDS403A06528 6,528 .2570 57 67 1,1 105 36 8
4143805 VDS403A06600 6,600 .2598 57 67 1,1 105 36 8
4143806 VDS403A06630 6,630 .2610 57 56 1,1 105 36 8
4143807 VDS403A06700 6,700 .2638 57 67 1,1 105 36 8
4143808 VDS403A06746 6,746 .2656 57 56 1,1 105 36 8
4143809 VDS403A06800 6,800 .2677 57 67 1,1 105 36 8
4143810 VDS403A06900 6,900 .2717 57 67 1,2 105 36 8
4143811 VDS403A07000 7,000 .2756 57 72 1,2 105 36 8
4143812 VDS403A07100 7,100 .2795 61 72 1,2 110 36 8
4143813 VDS403A07145 7,145 .2813 61 67 1,2 110 36 8
4143814 VDS403A07200 7,200 .2835 61 72 1,2 110 36 8
4143815 VDS403A07300 7,300 .2874 61 72 1,2 110 36 8
4143816 VDS403A07400 7,400 .2913 61 72 1,3 110 36 8
WID_Master16_Holemaking_SolidCarbideDrills_T024_T025_Metric_REBRAND.indd 24 10/29/15 1:21 PM
T25
LViWID M 16 H l ki S lidC bid D ill T024 T025 M i REBRANDO b 1520153 19PM
widia.com
(VDS403A • 8 x D — continued)
(continued)
rst choice
alternate choice
Solid Carbide Drills
VariDrill™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 8 x D
Solid Carbide Drills
WU25PD
D1 diameter
grade WU25PD
TiAlN
order # catalogue # mm in L4 max L3 L5 L LS D
4143817 VDS403A07500 7,500 .2953 61 72 1,3 110 36 8
4143818 VDS403A07541 7,541 .2969 61 72 1,3 110 36 8
4143819 VDS403A07600 7,600 .2992 61 80 1,3 110 36 8
4143820 VDS403A07700 7,700 .3031 61 80 1,3 110 36 8
4143821 VDS403A07800 7,800 .3071 61 80 1,3 110 36 8
4143822 VDS403A07900 7,900 .3110 61 80 1,3 110 36 8
4143823 VDS403A07938 7,938 .3125 61 80 1,3 110 36 8
4143824 VDS403A08000 8,000 .3150 61 80 1,4 110 36 8
4143825 VDS403A08100 8,100 .3189 68 80 1,4 122 40 10
4143826 VDS403A08200 8,200 .3228 68 80 1,4 122 40 10
4143827 VDS403A08300 8,300 .3268 68 80 1,4 122 40 10
4143828 VDS403A08334 8,334 .3281 68 80 1,4 122 40 10
4143829 VDS403A08400 8,400 .3307 68 72 1,4 122 40 10
4143830 VDS403A08433 8,433 .3320 68 80 1,4 122 40 10
4143831 VDS403A08500 8,500 .3346 68 80 1,4 122 40 10
4143832 VDS403A08600 8,600 .3386 68 80 1,5 122 40 10
4143833 VDS403A08700 8,700 .3425 68 72 1,5 122 40 10
4143834 VDS403A08733 8,733 .3438 68 72 1,5 122 40 10
4143835 VDS403A08800 8,800 .3465 68 72 1,5 122 40 10
4143836 VDS403A08900 8,900 .3504 68 72 1,5 122 40 10
4143837 VDS403A09000 9,000 .3543 68 72 1,5 122 40 10
4143838 VDS403A09100 9,100 .3583 68 80 1,5 122 40 10
4143839 VDS403A09129 9,129 .3594 68 80 1,6 122 40 10
4143840 VDS403A09200 9,200 .3622 68 80 1,6 122 40 10
4143841 VDS403A09300 9,300 .3661 68 80 1,6 122 40 10
4143842 VDS403A09347 9,347 .3680 68 80 1,6 122 40 10
4143843 VDS403A09400 9,400 .3701 68 80 1,6 122 40 10
4143844 VDS403A09500 9,500 .3740 68 80 1,6 122 40 10
4143845 VDS403A09525 9,525 .3750 68 80 1,6 122 40 10
4143846 VDS403A09600 9,600 .3780 68 80 1,6 122 40 10
4143847 VDS403A09700 9,700 .3819 68 80 1,7 122 40 10
4143848 VDS403A09800 9,800 .3858 68 80 1,7 122 40 10
4143849 VDS403A09900 9,900 .3898 68 80 1,7 122 40 10
4143850 VDS403A09921 9,921 .3906 68 80 1,7 122 40 10
4143421 VDS403A10000 10,000 .3937 68 80 1,7 122 40 10
4143422 VDS403A10100 10,100 .3976 79 94 1,7 141 45 12
4143473 VDS403A10200 10,200 .4016 79 94 1,7 141 45 12
4143474 VDS403A10300 10,300 .4055 79 94 1,8 141 45 12
4143475 VDS403A10320 10,320 .4063 79 94 1,8 141 45 12
4143476 VDS403A10400 10,400 .4094 79 94 1,8 141 45 12
WID_Master16_Holemaking_SolidCarbideDrills_T024_T025_Metric_REBRAND.indd 25 10/29/15 1:21 PM
T26
LViWID M 16 H l ki S lidC bid D ill T026 T027 M i REBRANDO b 15 20153 20PM
widia.com
(continued)
(VDS403A • 8 x D — continued)
rst choice
alternate choice
Solid Carbide Drills
VariDrill™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 8 x D
Solid Carbide Drills
WU25PD
D1 diameter
grade WU25PD
TiAlN
order # catalogue # mm in L4 max L3 L5 L LS D
4143477 VDS403A10500 10,500 .4134 79 94 1,8 141 45 12
4143478 VDS403A10600 10,600 .4173 79 94 1,8 141 45 12
4143479 VDS403A10700 10,700 .4213 79 94 1,8 141 45 12
4143480 VDS403A10716 10,716 .4219 79 94 1,8 141 45 12
4143481 VDS403A10800 10,800 .4252 79 94 1,8 141 45 12
4143482 VDS403A10900 10,900 .4291 79 94 1,9 141 45 12
4143483 VDS403A11000 11,000 .4331 79 94 1,9 141 45 12
4143484 VDS403A11100 11,100 .4370 79 94 1,9 141 45 12
4143485 VDS403A11113 11,113 .4375 79 94 1,9 141 45 12
4143486 VDS403A11200 11,200 .4409 79 94 1,9 141 45 12
4143487 VDS403A11300 11,300 .4449 79 94 1,9 141 45 12
4143488 VDS403A11400 11,400 .4488 79 94 2,0 141 45 12
4143489 VDS403A11500 11,500 .4528 79 94 2,0 141 45 12
4143490 VDS403A11509 11,509 .4531 79 94 2,0 141 45 12
4143491 VDS403A11600 11,600 .4567 79 94 2,0 141 45 12
4143492 VDS403A11700 11,700 .4606 79 94 2,0 141 45 12
4143493 VDS403A11800 11,800 .4646 79 94 2,0 141 45 12
4143494 VDS403A11900 11,900 .4685 79 94 2,0 141 45 12
4143495 VDS403A11908 11,908 .4688 79 94 2,0 141 45 12
4143496 VDS403A12000 12,000 .4724 79 94 2,1 141 45 12
4143497 VDS403A12100 12,100 .4764 91 108 2,1 155 45 14
4143498 VDS403A12200 12,200 .4803 91 108 2,1 155 45 14
4143499 VDS403A12300 12,300 .4843 91 108 2,1 155 45 14
4143500 VDS403A12304 12,304 .4844 91 108 2,1 155 45 14
4143501 VDS403A12400 12,400 .4882 91 108 2,1 155 45 14
4143502 VDS403A12500 12,500 .4921 91 108 2,1 155 45 14
4143503 VDS403A12600 12,600 .4961 91 108 2,2 155 45 14
4143504 VDS403A12700 12,700 .5000 91 108 2,2 155 45 14
4143505 VDS403A12800 12,800 .5039 91 108 2,2 155 45 14
4143506 VDS403A12900 12,900 .5079 91 108 2,2 155 45 14
4143507 VDS403A13000 13,000 .5118 91 108 2,2 155 45 14
4143508 VDS403A13096 13,096 .5156 91 108 2,3 155 45 14
4143509 VDS403A13100 13,100 .5157 91 108 2,3 155 45 14
4143510 VDS403A13200 13,200 .5197 91 108 2,3 155 45 14
4143511 VDS403A13300 13,300 .5236 91 108 2,3 155 45 14
4143512 VDS403A13400 13,400 .5276 91 108 2,3 155 45 14
4143513 VDS403A13500 13,500 .5315 91 108 2,3 155 45 14
4143514 VDS403A13600 13,600 .5354 91 108 2,3 155 45 14
4143515 VDS403A13700 13,700 .5394 91 108 2,4 155 45 14
4143516 VDS403A13800 13,800 .5433 91 108 2,4 155 45 14
WID_Master16_Holemaking_SolidCarbideDrills_T026_T027_Metric_REBRAND.indd 26 10/29/15 1:21 PM
T27
LViWID M 16 H l ki S lidC bid D ill T026 T027 M i REBRANDO b 1520153 20PM
widia.com
(continued)
(VDS403A • 8 x D — continued)
rst choice
alternate choice
Solid Carbide Drills
VariDrill™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 8 x D
Solid Carbide Drills
WU25PD
D1 diameter
grade WU25PD
TiAlN
order # catalogue # mm in L4 max L3 L5 L LS D
4143517 VDS403A13891 13,891 .5469 91 108 2,4 155 45 14
4143518 VDS403A13900 13,900 .5472 91 108 2,4 155 45 14
4143519 VDS403A14000 14,000 .5512 91 108 2,4 155 45 14
4143520 VDS403A14100 14,100 .5551 101 121 2,4 171 48 16
4143521 VDS403A14200 14,200 .5591 101 121 2,5 171 48 16
4143522 VDS403A14288 14,288 .5625 101 121 2,5 171 48 16
4143523 VDS403A14300 14,300 .5630 101 121 2,5 171 48 16
4143524 VDS403A14400 14,400 .5669 101 121 2,5 171 48 16
4143525 VDS403A14500 14,500 .5709 101 121 2,5 171 48 16
4143526 VDS403A14600 14,600 .5748 101 121 2,5 171 48 16
4143527 VDS403A14684 14,684 .5781 101 121 2,5 171 48 16
4143528 VDS403A14700 14,700 .5787 101 121 2,5 171 48 16
4143529 VDS403A14800 14,800 .5827 101 121 2,6 171 48 16
4143530 VDS403A14900 14,900 .5866 101 121 2,6 171 48 16
4143531 VDS403A15000 15,000 .5906 101 121 2,6 171 48 16
4143532 VDS403A15083 15,083 .5938 101 121 2,6 171 48 16
4143533 VDS403A15100 15,100 .5945 101 121 2,6 171 48 16
4143534 VDS403A15200 15,200 .5984 101 121 2,6 171 48 16
4143535 VDS403A15300 15,300 .6024 101 121 2,6 171 48 16
4143536 VDS403A15400 15,400 .6063 101 121 2,7 171 48 16
4143537 VDS403A15479 15,479 .6094 101 121 2,7 171 48 16
4143538 VDS403A15500 15,500 .6102 101 121 2,7 171 48 16
4143539 VDS403A15600 15,600 .6142 101 121 2,7 171 48 16
4143540 VDS403A15700 15,700 .6181 101 121 2,7 171 48 16
4143541 VDS403A15800 15,800 .6220 101 121 2,7 171 48 16
4143542 VDS403A15875 15,875 .6250 101 121 2,7 171 48 16
4143543 VDS403A15900 15,900 .6260 101 121 2,8 171 48 16
4143544 VDS403A16000 16,000 .6299 101 121 2,8 171 48 16
4143545 VDS403A16100 16,100 .6339 113 135 2,8 185 48 18
4143546 VDS403A16200 16,200 .6378 113 135 2,8 185 48 18
4143547 VDS403A16271 16,271 .6406 113 135 2,8 185 48 18
4143548 VDS403A16300 16,300 .6417 113 135 2,8 185 48 18
4143549 VDS403A16400 16,400 .6457 113 135 2,8 185 48 18
4143550 VDS403A16500 16,500 .6496 113 135 2,9 185 48 18
4143551 VDS403A16600 16,600 .6535 113 135 2,9 185 48 18
4143552 VDS403A16670 16,670 .6563 113 135 2,9 185 48 18
4143553 VDS403A16700 16,700 .6575 113 135 2,9 185 48 18
4143554 VDS403A16800 16,800 .6614 113 135 2,9 185 48 18
4143555 VDS403A16900 16,900 .6654 113 135 2,9 185 48 18
4143556 VDS403A17000 17,000 .6693 113 135 2,9 185 48 18
WID_Master16_Holemaking_SolidCarbideDrills_T026_T027_Metric_REBRAND.indd 27 10/29/15 1:21 PM
T28
LViWID M 16 H l ki S lidC bid D ill T028 T029 M i REBRANDO b 15 20153 21PM
widia.com
(VDS403A • 8 x D — continued)
rst choice
alternate choice
Solid Carbide Drills
VariDrill™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 8 x D
Solid Carbide Drills
WU25PD
D1 diameter
grade WU25PD
TiAlN
order # catalogue # mm in L4 max L3 L5 L LS D
4143557 VDS403A17100 17,100 .6732 113 135 3,0 185 48 18
4143558 VDS403A17200 17,200 .6772 113 135 3,0 185 48 18
4143559 VDS403A17300 17,300 .6811 113 135 3,0 185 48 18
4143560 VDS403A17400 17,400 .6850 113 135 3,0 185 48 18
4143561 VDS403A17463 17,463 .6875 113 135 3,0 185 48 18
4143562 VDS403A17500 17,500 .6890 113 135 3,0 185 48 18
4143563 VDS403A17600 17,600 .6929 113 135 3,1 185 48 18
4143564 VDS403A17700 17,700 .6969 113 135 3,1 185 48 18
4143565 VDS403A17800 17,800 .7008 113 135 3,1 185 48 18
4143566 VDS403A17859 17,859 .7031 113 135 3,1 185 48 18
4143567 VDS403A17900 17,900 .7047 113 135 3,1 185 48 18
4144209 VDS403A18000 18,000 .7087 113 135 3,1 185 48 18
4144211 VDS403A18100 18,100 .7126 124 148 3,1 200 50 20
4144212 VDS403A18200 18,200 .7165 124 148 3,2 200 50 20
4144244 VDS403A18258 18,258 .7188 124 148 3,2 200 50 20
4144246 VDS403A18300 18,300 .7205 124 148 3,2 200 50 20
4144248 VDS403A18400 18,400 .7244 124 148 3,2 200 50 20
4144250 VDS403A18500 18,500 .7283 124 148 3,2 200 50 20
4144252 VDS403A18600 18,600 .7323 124 148 3,2 200 50 20
4144254 VDS403A18654 18,654 .7344 124 148 3,2 200 50 20
4144256 VDS403A18700 18,700 .7362 124 148 3,2 200 50 20
4144258 VDS403A18800 18,800 .7402 124 148 3,3 200 50 20
4144260 VDS403A18900 18,900 .7441 124 148 3,3 200 50 20
4144262 VDS403A19000 19,000 .7480 124 148 3,3 200 50 20
4144275 VDS403A19050 19,050 .7500 124 148 3,3 200 50 20
4144277 VDS403A19100 19,100 .7520 124 148 3,3 200 50 20
4144279 VDS403A19200 19,200 .7559 124 148 3,3 200 50 20
4144281 VDS403A19300 19,300 .7598 124 148 3,4 200 50 20
4144283 VDS403A19400 19,400 .7638 124 148 3,4 200 50 20
4144285 VDS403A19500 19,500 .7677 124 148 3,4 200 50 20
4144287 VDS403A19600 19,600 .7717 124 148 3,4 200 50 20
4144289 VDS403A19700 19,700 .7756 124 148 3,4 200 50 20
4144291 VDS403A19800 19,800 .7795 124 148 3,4 200 50 20
4144303 VDS403A19900 19,900 .7835 124 148 3,5 200 50 20
4144305 VDS403A20000 20,000 .7874 124 148 3,5 200 50 20
WID_Master16_Holemaking_SolidCarbideDrills_T028_T029_Metric_REBRAND.indd 28 10/29/15 1:21 PM
T29
LViWID M 16 H l ki S lidC bid D ill T028 T029 M i REBRANDO b 1520153 21PM
widia.com
VDS201F • WU25PD VDS401F • WU25PD
Solid Carbide Drills
VariDrill™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 3 x D
VDS201F • VDS401F • 3 x D
D1 diameter
grade WU25PD
TiAlN
order # catalogue #
grade WU25PD
TiAlN
order # catalogue # mm in L4 max L3 L5 L LS D
4147927 VDS201F03000 4140012 VDS401F03000 3,000 .1181 14 20 0,5 62 36 6
4147928 VDS201F03100 4140023 VDS401F03100 3,100 .1220 14 20 0,5 62 36 6
4147929 VDS201F03200 4140024 VDS401F03200 3,200 .1260 14 20 0,5 62 36 6
4147930 VDS201F03300 4140025 VDS401F03300 3,300 .1299 14 20 0,5 62 36 6
4147931 VDS201F03400 4140026 VDS401F03400 3,400 .1339 14 20 0,6 62 36 6
4147932 VDS201F03500 4140027 VDS401F03500 3,500 .1378 14 20 0,6 62 36 6
4147933 VDS201F03600 4140028 VDS401F03600 3,600 .1417 14 20 0,6 62 36 6
4147934 VDS201F03700 4140029 VDS401F03700 3,700 .1457 14 20 0,6 62 36 6
4147935 VDS201F03800 4140030 VDS401F03800 3,800 .1496 17 24 0,6 66 36 6
4147936 VDS201F03900 4140031 VDS401F03900 3,900 .1535 17 24 0,6 66 36 6
4147937 VDS201F04000 4140032 VDS401F04000 4,000 .1575 17 24 0,7 66 36 6
4147938 VDS201F04100 4140033 VDS401F04100 4,100 .1614 17 24 0,7 66 36 6
4147939 VDS201F04200 4140034 VDS401F04200 4,200 .1654 17 24 0,7 66 36 6
4147940 VDS201F04300 4140035 VDS401F04300 4,300 .1693 17 24 0,7 66 36 6
4147941 VDS201F04400 4140036 VDS401F04400 4,400 .1732 17 24 0,7 66 36 6
4147942 VDS201F04500 4140037 VDS401F04500 4,500 .1772 17 24 0,7 66 36 6
4147943 VDS201F04600 4140038 VDS401F04600 4,600 .1811 17 24 0,8 66 36 6
4147944 VDS201F04700 4140039 VDS401F04700 4,700 .1850 17 24 0,8 66 36 6
4147945 VDS201F04800 4140040 VDS401F04800 4,800 .1890 20 28 0,8 66 36 6
4147946 VDS201F04900 4140041 VDS401F04900 4,900 .1929 20 28 0,8 66 36 6
4147947 VDS201F05000 4140042 VDS401F05000 5,000 .1969 20 28 0,8 66 36 6
4147948 VDS201F05100 4140043 VDS401F05100 5,100 .2008 20 28 0,8 66 36 6
4147949 VDS201F05200 4140044 VDS401F05200 5,200 .2047 20 28 0,9 66 36 6
4147950 VDS201F05300 4140045 VDS401F05300 5,300 .2087 20 28 0,9 66 36 6
rst choice
alternate choice
(continued)
For information on L, L3, and L4 max, see page T143.
Solid Carbide Drills
WID_Master16_Holemaking_SolidCarbideDrills_T028_T029_Metric_REBRAND.indd 29 10/29/15 1:21 PM
T30
LViWID M 16 H l ki S lidC bid D ill T030 T031 M i REBRANDO b 15 20153 22PM
widia.com
VDS201F • WU25PD VDS401F • WU25PD
Solid Carbide Drills
VariDrill™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 3 x D
(VDS201F • VDS401F • 3 x D — continued)
(continued)
Solid Carbide Drills
rst choice
alternate choice
D1 diameter
grade WU25PD
TiAlN
order # catalogue #
grade WU25PD
TiAlN
order # catalogue # mm in L4 max L3 L5 L LS D
4147951 VDS201F05400 4140046 VDS401F05400 5,400 .2126 20 28 0,9 66 36 6
4147952 VDS201F05500 4140047 VDS401F05500 5,500 .2165 20 28 0,9 66 36 6
4147953 VDS201F05600 4140048 VDS401F05600 5,600 .2205 20 28 0,9 66 36 6
4147954 VDS201F05700 4140049 VDS401F05700 5,700 .2244 20 28 1,0 66 36 6
4147955 VDS201F05800 4140050 VDS401F05800 5,800 .2283 20 28 1,0 66 36 6
4147956 VDS201F05900 4140051 VDS401F05900 5,900 .2323 20 28 1,0 66 36 6
4147957 VDS201F06000 4140052 VDS401F06000 6,000 .2362 20 28 1,0 66 36 6
4147958 VDS201F06100 4140053 VDS401F06100 6,100 .2402 24 34 1,0 79 36 8
4147959 VDS201F06200 4140054 VDS401F06200 6,200 .2441 24 34 1,0 79 36 8
4147960 VDS201F06300 4140055 VDS401F06300 6,300 .2480 24 34 1,1 79 36 8
4147961 VDS201F06400 4140056 VDS401F06400 6,400 .2520 24 34 1,1 79 36 8
4147962 VDS201F06500 4140057 VDS401F06500 6,500 .2559 24 34 1,1 79 36 8
4147963 VDS201F06600 4140058 VDS401F06600 6,600 .2598 24 34 1,1 79 36 8
4147964 VDS201F06700 4140059 VDS401F06700 6,700 .2638 24 34 1,1 79 36 8
4147965 VDS201F06800 4140060 VDS401F06800 6,800 .2677 24 34 1,1 79 36 8
4147966 VDS201F06900 4140061 VDS401F06900 6,900 .2717 24 34 1,2 79 36 8
4147967 VDS201F07000 4140062 VDS401F07000 7,000 .2756 24 34 1,2 79 36 8
4147968 VDS201F07100 4140063 VDS401F07100 7,100 .2795 29 41 1,2 79 36 8
4147969 VDS201F07200 4140064 VDS401F07200 7,200 .2835 29 41 1,2 79 36 8
4147970 VDS201F07300 4140065 VDS401F07300 7,300 .2874 29 41 1,2 79 36 8
4147971 VDS201F07400 4140066 VDS401F07400 7,400 .2913 29 41 1,3 79 36 8
4147972 VDS201F07500 4140067 VDS401F07500 7,500 .2953 29 41 1,3 79 36 8
4147973 VDS201F07600 4140068 VDS401F07600 7,600 .2992 29 41 1,3 79 36 8
4147974 VDS201F07700 4140069 VDS401F07700 7,700 .3031 29 41 1,3 79 36 8
4147975 VDS201F07800 4140070 VDS401F07800 7,800 .3071 29 41 1,3 79 36 8
4147976 VDS201F07900 4140071 VDS401F07900 7,900 .3110 29 41 1,3 79 36 8
4147977 VDS201F08000 4140072 VDS401F08000 8,000 .3150 29 41 1,4 79 36 8
4147978 VDS201F08100 4140073 VDS401F08100 8,100 .3189 35 47 1,4 89 40 10
4147979 VDS201F08200 4140074 VDS401F08200 8,200 .3228 35 47 1,4 89 40 10
4147980 VDS201F08300 4140075 VDS401F08300 8,300 .3268 35 47 1,4 89 40 10
4147981 VDS201F08400 4140076 VDS401F08400 8,400 .3307 35 47 1,4 89 40 10
4147982 VDS201F08500 4140077 VDS401F08500 8,500 .3346 35 47 1,4 89 40 10
4147983 VDS201F08600 4140078 VDS401F08600 8,600 .3386 35 47 1,5 89 40 10
4147984 VDS201F08700 4140079 VDS401F08700 8,700 .3425 35 47 1,5 89 40 10
4147985 VDS201F08800 4140080 VDS401F08800 8,800 .3465 35 47 1,5 89 40 10
4147986 VDS201F08900 4140081 VDS401F08900 8,900 .3504 35 47 1,5 89 40 10
4147987 VDS201F09000 4140082 VDS401F09000 9,000 .3543 35 47 1,5 89 40 10
4147988 VDS201F09100 4140083 VDS401F09100 9,100 .3583 35 47 1,5 89 40 10
4147989 VDS201F09200 4140084 VDS401F09200 9,200 .3622 35 47 1,6 89 40 10
4147990 VDS201F09300 4140085 VDS401F09300 9,300 .3661 35 47 1,6 89 40 10
WID_Master16_Holemaking_SolidCarbideDrills_T030_T031_Metric_REBRAND.indd 30 10/29/15 1:21 PM
T31
LViWID M 16 H l ki S lidC bid D ill T030 T031 M i REBRANDO b 1520153 22PM
widia.com
VDS201F • WU25PD VDS401F • WU25PD
Solid Carbide Drills
VariDrill™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 3 x D
Solid Carbide Drills
(continued)
(VDS201F • VDS401F • 3 x D — continued)
rst choice
alternate choice
D1 diameter
grade WU25PD
TiAlN
order # catalogue #
grade WU25PD
TiAlN
order # catalogue # mm in L4 max L3 L5 L LS D
4147991 VDS201F09400 4140086 VDS401F09400 9,400 .3701 35 47 1,6 89 40 10
4147992 VDS201F09500 4140087 VDS401F09500 9,500 .3740 35 47 1,6 89 40 10
4147993 VDS201F09600 4140088 VDS401F09600 9,600 .3780 35 47 1,6 89 40 10
4147994 VDS201F09700 4140089 VDS401F09700 9,700 .3819 35 47 1,7 89 40 10
4147995 VDS201F09800 4140090 VDS401F09800 9,800 .3858 35 47 1,7 89 40 10
4147996 VDS201F09900 4140091 VDS401F09900 9,900 .3898 35 47 1,7 89 40 10
4148039 VDS201F10000 4140410 VDS401F10000 10,000 .3937 35 47 1,7 89 40 10
4148040 VDS201F10100 4140411 VDS401F10100 10,100 .3976 40 55 1,7 102 45 12
4148041 VDS201F10200 4140412 VDS401F10200 10,200 .4016 40 55 1,7 102 45 12
4148042 VDS201F10300 4140503 VDS401F10300 10,300 .4055 40 55 1,8 102 45 12
4148043 VDS201F10400 4140504 VDS401F10400 10,400 .4094 40 55 1,8 102 45 12
4148044 VDS201F10500 4140505 VDS401F10500 10,500 .4134 40 55 1,8 102 45 12
4148045 VDS201F10600 4140506 VDS401F10600 10,600 .4173 40 55 1,8 102 45 12
4148046 VDS201F10700 4140507 VDS401F10700 10,700 .4213 40 55 1,8 102 45 12
4148047 VDS201F10800 4140508 VDS401F10800 10,800 .4252 40 55 1,8 102 45 12
4148048 VDS201F10900 4140509 VDS401F10900 10,900 .4291 40 55 1,9 102 45 12
4148049 VDS201F11000 4140510 VDS401F11000 11,000 .4331 40 55 1,9 102 45 12
4148050 VDS201F11100 4140511 VDS401F11100 11,100 .4370 40 55 1,9 102 45 12
4148051 VDS201F11200 4140512 VDS401F11200 11,200 .4409 40 55 1,9 102 45 12
4148052 VDS201F11300 4140513 VDS401F11300 11,300 .4449 40 55 1,9 102 45 12
4148053 VDS201F11400 4140514 VDS401F11400 11,400 .4488 40 55 2,0 102 45 12
4148054 VDS201F11500 4140515 VDS401F11500 11,500 .4528 40 55 2,0 102 45 12
4148055 VDS201F11600 4140516 VDS401F11600 11,600 .4567 40 55 2,0 102 45 12
4148056 VDS201F11700 4140517 VDS401F11700 11,700 .4606 40 55 2,0 102 45 12
4148057 VDS201F11800 4140518 VDS401F11800 11,800 .4646 40 55 2,0 102 45 12
4148058 VDS201F11900 4140519 VDS401F11900 11,900 .4685 40 55 2,0 102 45 12
4148059 VDS201F12000 4140520 VDS401F12000 12,000 .4724 40 55 2,1 102 45 12
4148060 VDS201F12100 4140521 VDS401F12100 12,100 .4764 43 60 2,1 107 45 14
4148061 VDS201F12200 4140522 VDS401F12200 12,200 .4803 43 60 2,1 107 45 14
4148062 VDS201F12300 4140523 VDS401F12300 12,300 .4843 43 60 2,1 107 45 14
4148063 VDS201F12400 4140524 VDS401F12400 12,400 .4882 43 60 2,1 107 45 14
4148064 VDS201F12500 4140525 VDS401F12500 12,500 .4921 43 60 2,1 107 45 14
4148065 VDS201F12600 4140526 VDS401F12600 12,600 .4961 43 60 2,2 107 45 14
4148066 VDS201F12700 4140527 VDS401F12700 12,700 .5000 43 60 2,2 107 45 14
4148067 VDS201F12800 4140528 VDS401F12800 12,800 .5039 43 60 2,2 107 45 14
4148068 VDS201F12900 4140529 VDS401F12900 12,900 .5079 43 60 2,2 107 45 14
4148069 VDS201F13000 4140530 VDS401F13000 13,000 .5118 43 60 2,2 107 45 14
4148070 VDS201F13100 4140531 VDS401F13100 13,100 .5157 43 60 2,3 107 45 14
4148071 VDS201F13200 4140532 VDS401F13200 13,200 .5197 43 60 2,3 107 45 14
4148072 VDS201F13300 4140533 VDS401F13300 13,300 .5236 43 60 2,3 107 45 14
WID_Master16_Holemaking_SolidCarbideDrills_T030_T031_Metric_REBRAND.indd 31 10/29/15 1:21 PM
T32
LViWID M 16 H l ki S lidC bid D ill T032 T033 M i REBRANDO b 15 20153 23PM
widia.com
VDS201F • WU25PD VDS401F • WU25PD
(continued)
(VDS201F • VDS401F • 3 x D — continued)
Solid Carbide Drills
VariDrill™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 3 x D
rst choice
alternate choice
Solid Carbide Drills
D1 diameter
grade WU25PD
TiAlN
order # catalogue #
grade WU25PD
TiAlN
order # catalogue # mm in L4 max L3 L5 L LS D
4148073 VDS201F13400 4140534 VDS401F13400 13,400 .5276 43 60 2,3 107 45 14
4148074 VDS201F13500 4140535 VDS401F13500 13,500 .5315 43 60 2,3 107 45 14
4148075 VDS201F13600 4140536 VDS401F13600 13,600 .5354 43 60 2,3 107 45 14
4148076 VDS201F13700 4140537 VDS401F13700 13,700 .5394 43 60 2,4 107 45 14
4148077 VDS201F13800 4140538 VDS401F13800 13,800 .5433 43 60 2,4 107 45 14
4148078 VDS201F13900 4140539 VDS401F13900 13,900 .5472 43 60 2,4 107 45 14
4148079 VDS201F14000 4140540 VDS401F14000 14,000 .5512 43 60 2,4 107 45 14
4148080 VDS201F14100 4140541 VDS401F14100 14,100 .5551 45 65 2,4 115 48 16
4148081 VDS201F14200 4140542 VDS401F14200 14,200 .5591 45 65 2,5 115 48 16
4148082 VDS201F14300 4140543 VDS401F14300 14,300 .5630 45 65 2,5 115 48 16
4148083 VDS201F14400 4140544 VDS401F14400 14,400 .5669 45 65 2,5 115 48 16
4148084 VDS201F14500 4140545 VDS401F14500 14,500 .5709 45 65 2,5 115 48 16
4148085 VDS201F14600 4140546 VDS401F14600 14,600 .5748 45 65 2,5 115 48 16
4148086 VDS201F14700 4140547 VDS401F14700 14,700 .5787 45 65 2,5 115 48 16
4148087 VDS201F14800 4140548 VDS401F14800 14,800 .5827 45 65 2,6 115 48 16
4148088 VDS201F14900 4140549 VDS401F14900 14,900 .5866 45 65 2,6 115 48 16
4148089 VDS201F15000 4140550 VDS401F15000 15,000 .5906 45 65 2,6 115 48 16
4148090 VDS201F15100 4140551 VDS401F15100 15,100 .5945 45 65 2,6 115 48 16
4148091 VDS201F15200 4140552 VDS401F15200 15,200 .5984 45 65 2,6 115 48 16
4148092 VDS201F15300 4140553 VDS401F15300 15,300 .6024 45 65 2,6 115 48 16
4148093 VDS201F15400 4140554 VDS401F15400 15,400 .6063 45 65 2,7 115 48 16
4148094 VDS201F15500 4140555 VDS401F15500 15,500 .6102 45 65 2,7 115 48 16
4148095 VDS201F15600 4140556 VDS401F15600 15,600 .6142 45 65 2,7 115 48 16
4148096 VDS201F15700 4140557 VDS401F15700 15,700 .6181 45 65 2,7 115 48 16
4148097 VDS201F15800 4140558 VDS401F15800 15,800 .6220 45 65 2,7 115 48 16
4148098 VDS201F15900 4140559 VDS401F15900 15,900 .6260 45 65 2,8 115 48 16
4148099 VDS201F16000 4140560 VDS401F16000 16,000 .6299 45 65 2,8 115 48 16
4148100 VDS201F16100 4140561 VDS401F16100 16,100 .6339 51 73 2,8 123 48 18
4148101 VDS201F16200 4140562 VDS401F16200 16,200 .6378 51 73 2,8 123 48 18
4148102 VDS201F16300 4140563 VDS401F16300 16,300 .6417 51 73 2,8 123 48 18
4148103 VDS201F16400 4140564 VDS401F16400 16,400 .6457 51 73 2,8 123 48 18
4148104 VDS201F16500 4140565 VDS401F16500 16,500 .6496 51 73 2,9 123 48 18
4148105 VDS201F16600 4140566 VDS401F16600 16,600 .6535 51 73 2,9 123 48 18
4148106 VDS201F16700 4140567 VDS401F16700 16,700 .6575 51 73 2,9 123 48 18
4148107 VDS201F16800 4140568 VDS401F16800 16,800 .6614 51 73 2,9 123 48 18
4148108 VDS201F16900 4140569 VDS401F16900 16,900 .6654 51 73 2,9 123 48 18
4148109 VDS201F17000 4140570 VDS401F17000 17,000 .6693 51 73 2,9 123 48 18
4148110 VDS201F17100 4140571 VDS401F17100 17,100 .6732 51 73 3,0 123 48 18
4148111 VDS201F17200 4140572 VDS401F17200 17,200 .6772 51 73 3,0 123 48 18
4148112 VDS201F17300 4140573 VDS401F17300 17,300 .6811 51 73 3,0 123 48 18
WID_Master16_Holemaking_SolidCarbideDrills_T032_T033_Metric_REBRAND.indd 32 10/29/15 1:21 PM
T33
LViWID M 16 H l ki S lidC bid D ill T032 T033 M i REBRANDO b 1520153 23PM
widia.com
VDS201F • WU25PD VDS401F • WU25PD
(VDS201F • VDS401F • 3 x D — continued)
Solid Carbide Drills
VariDrill™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 3 x D
rst choice
alternate choice
Solid Carbide Drills
D1 diameter
grade WU25PD
TiAlN
order # catalogue #
grade WU25PD
TiAlN
order # catalogue # mm in L4 max L3 L5 L LS D
4148113 VDS201F17400 4140574 VDS401F17400 17,400 .6850 51 73 3,0 123 48 18
4148114 VDS201F17500 4140575 VDS401F17500 17,500 .6890 51 73 3,0 123 48 18
4148115 VDS201F17600 4140576 VDS401F17600 17,600 .6929 51 73 3,1 123 48 18
4148116 VDS201F17700 4140577 VDS401F17700 17,700 .6969 51 73 3,1 123 48 18
4148117 VDS201F17800 4140578 VDS401F17800 17,800 .7008 51 73 3,1 123 48 18
4148118 VDS201F17900 4140579 VDS401F17900 17,900 .7047 51 73 3,1 123 48 18
4148119 VDS201F18000 4140580 VDS401F18000 18,000 .7087 51 73 3,1 123 48 18
4148120 VDS201F18100 4140581 VDS401F18100 18,100 .7126 55 79 3,1 131 50 20
4148121 VDS201F18200 4140582 VDS401F18200 18,200 .7165 55 79 3,2 131 50 20
4148122 VDS201F18300 4140583 VDS401F18300 18,300 .7205 55 79 3,2 131 50 20
4148123 VDS201F18400 4140584 VDS401F18400 18,400 .7244 55 79 3,2 131 50 20
4148124 VDS201F18500 4140585 VDS401F18500 18,500 .7283 55 79 3,2 131 50 20
4148125 VDS201F18600 4140586 VDS401F18600 18,600 .7323 55 79 3,2 131 50 20
4148126 VDS201F18700 4140587 VDS401F18700 18,700 .7362 55 79 3,2 131 50 20
4148127 VDS201F18800 4140588 VDS401F18800 18,800 .7402 55 79 3,3 131 50 20
4148128 VDS201F18900 4140589 VDS401F18900 18,900 .7441 55 79 3,3 131 50 20
4148129 VDS201F19000 4140590 VDS401F19000 19,000 .7480 55 79 3,3 131 50 20
4148130 VDS201F19100 4140591 VDS401F19100 19,100 .7520 55 79 3,3 131 50 20
4148131 VDS201F19200 4140592 VDS401F19200 19,200 .7559 55 79 3,3 131 50 20
4148132 VDS201F19300 4140593 VDS401F19300 19,300 .7598 55 79 3,4 131 50 20
4148133 VDS201F19400 4140594 VDS401F19400 19,400 .7638 55 79 3,4 131 50 20
4148134 VDS201F19500 4140595 VDS401F19500 19,500 .7677 55 79 3,4 131 50 20
4148135 VDS201F19600 4140596 VDS401F19600 19,600 .7717 55 79 3,4 131 50 20
4148136 VDS201F19700 4140597 VDS401F19700 19,700 .7756 55 79 3,4 131 50 20
4148137 VDS201F19800 4140598 VDS401F19800 19,800 .7795 55 79 3,4 131 50 20
4148138 VDS201F19900 4140599 VDS401F19900 19,900 .7835 55 79 3,5 131 50 20
4148139 VDS201F20000 4140600 VDS401F20000 20,000 .7874 55 79 3,5 131 50 20
WID_Master16_Holemaking_SolidCarbideDrills_T032_T033_Metric_REBRAND.indd 33 10/29/15 1:21 PM
T34
LViWID M 16 H l ki S lidC bid D ill T034 T035 M i REBRANDO b 15 20153 24PM
widia.com
VDS202F • WU25PD VDS402F • WU25PD
Solid Carbide Drills
VariDrill™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 5 x D
VDS202F • VDS402F • 5 x D
D1 diameter
grade WU25PD
TiAlN
order # catalogue #
grade WU25PD
TiAlN
order # catalogue # mm in L4 max L3 L5 L LS D
4148335 VDS202F03000 4142783 VDS402F03000 3,000 .1181 23 28 0,5 66 36 6
4148336 VDS202F03100 4142784 VDS402F03100 3,100 .1220 23 28 0,5 66 36 6
4148337 VDS202F03200 4142785 VDS402F03200 3,200 .1260 23 28 0,5 66 36 6
4148338 VDS202F03300 4142786 VDS402F03300 3,300 .1299 23 28 0,5 66 36 6
4148339 VDS202F03400 4142787 VDS402F03400 3,400 .1339 23 28 0,6 66 36 6
4148340 VDS202F03500 4142788 VDS402F03500 3,500 .1378 23 28 0,6 66 36 6
4148341 VDS202F03600 4142789 VDS402F03600 3,600 .1417 23 28 0,6 66 36 6
4148342 VDS202F03700 4142790 VDS402F03700 3,700 .1457 23 28 0,6 66 36 6
4148413 VDS202F03800 4142791 VDS402F03800 3,800 .1496 29 36 0,6 74 36 6
4148414 VDS202F03900 4142792 VDS402F03900 3,900 .1535 29 36 0,6 74 36 6
4148415 VDS202F04000 4142793 VDS402F04000 4,000 .1575 29 36 0,7 74 36 6
4148416 VDS202F04100 4142794 VDS402F04100 4,100 .1614 29 36 0,7 74 36 6
4148417 VDS202F04200 4142795 VDS402F04200 4,200 .1654 29 36 0,7 74 36 6
4148418 VDS202F04300 4142796 VDS402F04300 4,300 .1693 29 36 0,7 74 36 6
4148419 VDS202F04400 4142797 VDS402F04400 4,400 .1732 29 36 0,7 74 36 6
4148420 VDS202F04500 4142798 VDS402F04500 4,500 .1772 29 36 0,7 74 36 6
4148421 VDS202F04600 4142799 VDS402F04600 4,600 .1811 29 36 0,8 74 36 6
4148422 VDS202F04700 4142800 VDS402F04700 4,700 .1850 29 36 0,8 74 36 6
4148423 VDS202F04800 4142801 VDS402F04800 4,800 .1890 35 44 0,8 82 36 6
4148424 VDS202F04900 4142802 VDS402F04900 4,900 .1929 35 44 0,8 82 36 6
4148425 VDS202F05000 4142813 VDS402F05000 5,000 .1969 35 44 0,8 82 36 6
4148426 VDS202F05100 4142814 VDS402F05100 5,100 .2008 35 44 0,8 82 36 6
4148427 VDS202F05200 4142815 VDS402F05200 5,200 .2047 35 44 0,9 82 36 6
4148428 VDS202F05300 4142816 VDS402F05300 5,300 .2087 35 44 0,9 82 36 6
rst choice
alternate choice
(continued)
Solid Carbide Drills
For information on L, L3, and L4 max, see page T143.
WID_Master16_Holemaking_SolidCarbideDrills_T034_T035_Metric_REBRAND.indd 34 10/29/15 1:21 PM
T35
LViWID M 16 H l ki S lidC bid D ill T034 T035 M i REBRANDO b 1520153 24PM
widia.com
VDS202F • WU25PD VDS402F • WU25PD
D1 diameter
grade WU25PD
TiAlN
order # catalogue #
grade WU25PD
TiAlN
order # catalogue # mm in L4 max L3 L5 L LS D
4148429 VDS202F05400 4142817 VDS402F05400 5,400 .2126 35 44 0,9 82 36 6
4148430 VDS202F05500 4142818 VDS402F05500 5,500 .2165 35 44 0,9 82 36 6
4148431 VDS202F05600 4142819 VDS402F05600 5,600 .2205 35 44 0,9 82 36 6
4148432 VDS202F05700 4142820 VDS402F05700 5,700 .2244 35 44 1,0 82 36 6
4148433 VDS202F05800 4142821 VDS402F05800 5,800 .2283 35 44 1,0 82 36 6
4148434 VDS202F05900 4142822 VDS402F05900 5,900 .2323 35 44 1,0 82 36 6
4148435 VDS202F06000 4142843 VDS402F06000 6,000 .2362 35 44 1,0 82 36 6
4148436 VDS202F06100 4142845 VDS402F06100 6,100 .2402 43 53 1,0 91 36 8
4148437 VDS202F06200 4142848 VDS402F06200 6,200 .2441 43 53 1,0 91 36 8
4148438 VDS202F06300 4142850 VDS402F06300 6,300 .2480 43 53 1,1 91 36 8
4148439 VDS202F06400 4142852 VDS402F06400 6,400 .2520 43 53 1,1 91 36 8
4148440 VDS202F06500 4142863 VDS402F06500 6,500 .2559 43 53 1,1 91 36 8
4148441 VDS202F06600 4142866 VDS402F06600 6,600 .2598 43 53 1,1 91 36 8
4148442 VDS202F06700 4142868 VDS402F06700 6,700 .2638 43 53 1,1 91 36 8
4148443 VDS202F06800 4142870 VDS402F06800 6,800 .2677 43 53 1,1 91 36 8
4148444 VDS202F06900 4142883 VDS402F06900 6,900 .2717 43 53 1,2 91 36 8
4148445 VDS202F07000 4142886 VDS402F07000 7,000 .2756 43 53 1,2 91 36 8
4148446 VDS202F07100 4142889 VDS402F07100 7,100 .2795 43 53 1,2 91 36 8
4148447 VDS202F07200 4142892 VDS402F07200 7,200 .2835 43 53 1,2 91 36 8
4148448 VDS202F07300 4142895 VDS402F07300 7,300 .2874 43 53 1,2 91 36 8
4148449 VDS202F07400 4142898 VDS402F07400 7,400 .2913 43 53 1,3 91 36 8
4148450 VDS202F07500 4142901 VDS402F07500 7,500 .2953 43 53 1,3 91 36 8
4148451 VDS202F07600 4142904 VDS402F07600 7,600 .2992 43 53 1,3 91 36 8
4148452 VDS202F07700 4142907 VDS402F07700 7,700 .3031 43 53 1,3 91 36 8
4148453 VDS202F07800 4142910 VDS402F07800 7,800 .3071 43 53 1,3 91 36 8
4148454 VDS202F07900 4142923 VDS402F07900 7,900 .3110 43 53 1,3 91 36 8
4148455 VDS202F08000 4142926 VDS402F08000 8,000 .3150 43 53 1,4 91 36 8
4148456 VDS202F08100 4142929 VDS402F08100 8,100 .3189 49 61 1,4 103 40 10
4148457 VDS202F08200 4142932 VDS402F08200 8,200 .3228 49 61 1,4 103 40 10
4148458 VDS202F08300 4142935 VDS402F08300 8,300 .3268 49 61 1,4 103 40 10
4148459 VDS202F08400 4142938 VDS402F08400 8,400 .3307 49 61 1,4 103 40 10
4148460 VDS202F08500 4142941 VDS402F08500 8,500 .3346 49 61 1,4 103 40 10
4148461 VDS202F08600 4142944 VDS402F08600 8,600 .3386 49 61 1,5 103 40 10
4148462 VDS202F08700 4142947 VDS402F08700 8,700 .3425 49 61 1,5 103 40 10
4148463 VDS202F08800 4142950 VDS402F08800 8,800 .3465 49 61 1,5 103 40 10
4148464 VDS202F08900 4142963 VDS402F08900 8,900 .3504 49 61 1,5 103 40 10
4148465 VDS202F09000 4142966 VDS402F09000 9,000 .3543 49 61 1,5 103 40 10
4148466 VDS202F09100 4142969 VDS402F09100 9,100 .3583 49 61 1,5 103 40 10
4148467 VDS202F09200 4142972 VDS402F09200 9,200 .3622 49 61 1,6 103 40 10
4148468 VDS202F09300 4142975 VDS402F09300 9,300 .3661 49 61 1,6 103 40 10
(VDS202F • VDS402F • 5 x D — continued)
(continued)
rst choice
alternate choice
Solid Carbide Drills
VariDrill™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 5 x D
Solid Carbide Drills
WID_Master16_Holemaking_SolidCarbideDrills_T034_T035_Metric_REBRAND.indd 35 10/29/15 1:21 PM
T36
LViWID M 16 H l ki S lidC bid D ill T036 T037 M i REBRANDO b 15 20153 25PM
widia.com
VDS202F • WU25PD VDS402F • WU25PD
Solid Carbide Drills
VariDrill™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 5 x D
Solid Carbide Drills
(VDS202F • VDS402F • 5 x D — continued)
rst choice
alternate choice
(continued)
D1 diameter
grade WU25PD
TiAlN
order # catalogue #
grade WU25PD
TiAlN
order # catalogue # mm in L4 max L3 L5 L LS D
4148469 VDS202F09400 4142978 VDS402F09400 9,400 .3701 49 61 1,6 103 40 10
4148470 VDS202F09500 4142980 VDS402F09500 9,500 .3740 49 61 1,6 103 40 10
4148471 VDS202F09600 4142982 VDS402F09600 9,600 .3780 49 61 1,6 103 40 10
4148472 VDS202F09700 4142993 VDS402F09700 9,700 .3819 49 61 1,7 103 40 10
4148473 VDS202F09800 4142995 VDS402F09800 9,800 .3858 49 61 1,7 103 40 10
4148474 VDS202F09900 4142998 VDS402F09900 9,900 .3898 49 61 1,7 103 40 10
4148405 VDS202F10000 4143569 VDS402F10000 10,000 .3937 49 61 1,7 103 40 10
4148406 VDS202F10100 4143570 VDS402F10100 10,100 .3976 56 71 1,7 118 45 12
4148407 VDS202F10200 4143571 VDS402F10200 10,200 .4016 56 71 1,7 118 45 12
4148408 VDS202F10300 4143572 VDS402F10300 10,300 .4055 56 71 1,8 118 45 12
4148409 VDS202F10400 4143583 VDS402F10400 10,400 .4094 56 71 1,8 118 45 12
4148410 VDS202F10500 4143584 VDS402F10500 10,500 .4134 56 71 1,8 118 45 12
4148411 VDS202F10600 4143585 VDS402F10600 10,600 .4173 56 71 1,8 118 45 12
4148412 VDS202F10700 4143586 VDS402F10700 10,700 .4213 56 71 1,8 118 45 12
4148483 VDS202F10800 4143587 VDS402F10800 10,800 .4252 56 71 1,8 118 45 12
4148484 VDS202F10900 4143588 VDS402F10900 10,900 .4291 56 71 1,9 118 45 12
4148485 VDS202F11000 4143589 VDS402F11000 11,000 .4331 56 71 1,9 118 45 12
4148486 VDS202F11100 4143590 VDS402F11100 11,100 .4370 56 71 1,9 118 45 12
4148487 VDS202F11200 4143591 VDS402F11200 11,200 .4409 56 71 1,9 118 45 12
4148488 VDS202F11300 4143592 VDS402F11300 11,300 .4449 56 71 1,9 118 45 12
4148489 VDS202F11400 4143593 VDS402F11400 11,400 .4488 56 71 2,0 118 45 12
4148490 VDS202F11500 4143594 VDS402F11500 11,500 .4528 56 71 2,0 118 45 12
4148491 VDS202F11600 4143595 VDS402F11600 11,600 .4567 56 71 2,0 118 45 12
4148492 VDS202F11700 4143596 VDS402F11700 11,700 .4606 56 71 2,0 118 45 12
4148493 VDS202F11800 4143597 VDS402F11800 11,800 .4646 56 71 2,0 118 45 12
4148494 VDS202F11900 4143598 VDS402F11900 11,900 .4685 56 71 2,0 118 45 12
4148495 VDS202F12000 4143599 VDS402F12000 12,000 .4724 56 71 2,1 118 45 12
4148496 VDS202F12100 4143600 VDS402F12100 12,100 .4764 60 77 2,1 124 45 14
4148497 VDS202F12200 4143601 VDS402F12200 12,200 .4803 60 77 2,1 124 45 14
4148498 VDS202F12300 4143602 VDS402F12300 12,300 .4843 60 77 2,1 124 45 14
4148499 VDS202F12400 4143603 VDS402F12400 12,400 .4882 60 77 2,1 124 45 14
4148500 VDS202F12500 4143604 VDS402F12500 12,500 .4921 60 77 2,1 124 45 14
4148501 VDS202F12600 4143605 VDS402F12600 12,600 .4961 60 77 2,2 124 45 14
4148502 VDS202F12700 4143606 VDS402F12700 12,700 .5000 60 77 2,2 124 45 14
4148503 VDS202F12800 4143607 VDS402F12800 12,800 .5039 60 77 2,2 124 45 14
4148504 VDS202F12900 4143608 VDS402F12900 12,900 .5079 60 77 2,2 124 45 14
4148505 VDS202F13000 4143609 VDS402F13000 13,000 .5118 60 77 2,2 124 45 14
4148506 VDS202F13100 4143610 VDS402F13100 13,100 .5157 60 77 2,3 124 45 14
4148507 VDS202F13200 4143611 VDS402F13200 13,200 .5197 60 77 2,3 124 45 14
4148508 VDS202F13300 4143612 VDS402F13300 13,300 .5236 60 77 2,3 124 45 14
WID_Master16_Holemaking_SolidCarbideDrills_T036_T037_Metric_REBRAND.indd 36 10/29/15 1:21 PM
T37
LViWID M 16 H l ki S lidC bid D ill T036 T037 M i REBRANDO b 1520153 25PM
widia.com
VDS202F • WU25PD VDS402F • WU25PD
(VDS202F • VDS402F • 5 x D — continued)
rst choice
alternate choice
Solid Carbide Drills
VariDrill™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 5 x D
Solid Carbide Drills
(continued)
D1 diameter
grade WU25PD
TiAlN
order # catalogue #
grade WU25PD
TiAlN
order # catalogue # mm in L4 max L3 L5 L LS D
4148509 VDS202F13400 4143613 VDS402F13400 13,400 .5276 60 77 2,3 124 45 14
4148510 VDS202F13500 4143614 VDS402F13500 13,500 .5315 60 77 2,3 124 45 14
4148511 VDS202F13600 4143615 VDS402F13600 13,600 .5354 60 77 2,3 124 45 14
4148512 VDS202F13700 4143616 VDS402F13700 13,700 .5394 60 77 2,4 124 45 14
4148513 VDS202F13800 4143617 VDS402F13800 13,800 .5433 60 77 2,4 124 45 14
4148514 VDS202F13900 4143618 VDS402F13900 13,900 .5472 60 77 2,4 124 45 14
4148515 VDS202F14000 4143619 VDS402F14000 14,000 .5512 60 77 2,4 124 45 14
4148516 VDS202F14100 4143620 VDS402F14100 14,100 .5551 63 83 2,4 133 48 16
4148517 VDS202F14200 4143621 VDS402F14200 14,200 .5591 63 83 2,5 133 48 16
4148518 VDS202F14300 4143622 VDS402F14300 14,300 .5630 63 83 2,5 133 48 16
4148519 VDS202F14400 4143623 VDS402F14400 14,400 .5669 63 83 2,5 133 48 16
4148520 VDS202F14500 4143624 VDS402F14500 14,500 .5709 63 83 2,5 133 48 16
4148521 VDS202F14600 4143625 VDS402F14600 14,600 .5748 63 83 2,5 133 48 16
4148522 VDS202F14700 4143626 VDS402F14700 14,700 .5787 63 83 2,5 133 48 16
4148523 VDS202F14800 4143627 VDS402F14800 14,800 .5827 63 83 2,6 133 48 16
4148524 VDS202F14900 4143628 VDS402F14900 14,900 .5866 63 83 2,6 133 48 16
4148525 VDS202F15000 4143629 VDS402F15000 15,000 .5906 63 83 2,6 133 48 16
4148526 VDS202F15100 4143630 VDS402F15100 15,100 .5945 63 83 2,6 133 48 16
4148527 VDS202F15200 4143631 VDS402F15200 15,200 .5984 63 83 2,6 133 48 16
4148528 VDS202F15300 4143632 VDS402F15300 15,300 .6024 63 83 2,6 133 48 16
4148529 VDS202F15400 4143633 VDS402F15400 15,400 .6063 63 83 2,7 133 48 16
4148530 VDS202F15500 4143634 VDS402F15500 15,500 .6102 63 83 2,7 133 48 16
4148531 VDS202F15600 4143635 VDS402F15600 15,600 .6142 63 83 2,7 133 48 16
4148532 VDS202F15700 4143636 VDS402F15700 15,700 .6181 63 83 2,7 133 48 16
4148533 VDS202F15800 4143637 VDS402F15800 15,800 .6220 63 83 2,7 133 48 16
4148534 VDS202F15900 4143638 VDS402F15900 15,900 .6260 63 83 2,8 133 48 16
4148535 VDS202F16000 4143639 VDS402F16000 16,000 .6299 63 83 2,8 133 48 16
4148536 VDS202F16100 4143640 VDS402F16100 16,100 .6339 71 93 2,8 143 48 18
4148537 VDS202F16200 4143641 VDS402F16200 16,200 .6378 71 93 2,8 143 48 18
4148538 VDS202F16300 4143642 VDS402F16300 16,300 .6417 71 93 2,8 143 48 18
4148539 VDS202F16400 4143643 VDS402F16400 16,400 .6457 71 93 2,8 143 48 18
4148540 VDS202F16500 4143644 VDS402F16500 16,500 .6496 71 93 2,9 143 48 18
4148541 VDS202F16600 4143645 VDS402F16600 16,600 .6535 71 93 2,9 143 48 18
4148542 VDS202F16700 4143646 VDS402F16700 16,700 .6575 71 93 2,9 143 48 18
4148543 VDS202F16800 4143647 VDS402F16800 16,800 .6614 71 93 2,9 143 48 18
4148544 VDS202F16900 4143648 VDS402F16900 16,900 .6654 71 93 2,9 143 48 18
4148545 VDS202F17000 4143649 VDS402F17000 17,000 .6693 71 93 2,9 143 48 18
4148546 VDS202F17100 4143650 VDS402F17100 17,100 .6732 71 93 3,0 143 48 18
4148547 VDS202F17200 4143651 VDS402F17200 17,200 .6772 71 93 3,0 143 48 18
4148548 VDS202F17300 4143652 VDS402F17300 17,300 .6811 71 93 3,0 143 48 18
WID_Master16_Holemaking_SolidCarbideDrills_T036_T037_Metric_REBRAND.indd 37 10/29/15 1:21 PM
T38
LViWID M 16 H l ki S lidC bid D ill T038 T039 M i REBRANDN b 12 20159 26AM
widia.com
VDS202F • WU25PD VDS402F • WU25PD
Solid Carbide Drills
VariDrill™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 5 x D
Solid Carbide Drills
(VDS202F • VDS402F • 5 x D — continued)
rst choice
alternate choice
D1 diameter
grade WU25PD
TiAlN
order # catalogue #
grade WU25PD
TiAlN
order # catalogue # mm in L4 max L3 L5 L LS D
4148549 VDS202F17400 4143653 VDS402F17400 17,400 .6850 71 93 3,0 143 48 18
4148550 VDS202F17500 4143654 VDS402F17500 17,500 .6890 71 93 3,0 143 48 18
4148551 VDS202F17600 4143655 VDS402F17600 17,600 .6929 71 93 3,1 143 48 18
4148552 VDS202F17700 4143656 VDS402F17700 17,700 .6969 71 93 3,1 143 48 18
4148553 VDS202F17800 4143657 VDS402F17800 17,800 .7008 71 93 3,1 143 48 18
4148554 VDS202F17900 4143658 VDS402F17900 17,900 .7047 71 93 3,1 143 48 18
4148555 VDS202F18000 4143659 VDS402F18000 18,000 .7087 71 93 3,1 143 48 18
4148556 VDS202F18100 4143660 VDS402F18100 18,100 .7126 77 101 3,1 153 50 20
4148557 VDS202F18200 4143661 VDS402F18200 18,200 .7165 77 101 3,2 153 50 20
4148558 VDS202F18300 4143662 VDS402F18300 18,300 .7205 77 101 3,2 153 50 20
4148559 VDS202F18400 4143663 VDS402F18400 18,400 .7244 77 101 3,2 153 50 20
4148560 VDS202F18500 4143664 VDS402F18500 18,500 .7283 77 101 3,2 153 50 20
4148561 VDS202F18600 4143665 VDS402F18600 18,600 .7323 77 101 3,2 153 50 20
4148562 VDS202F18700 4143666 VDS402F18700 18,700 .7362 77 101 3,2 153 50 20
4148563 VDS202F18800 4143667 VDS402F18800 18,800 .7402 77 101 3,3 153 50 20
4148564 VDS202F18900 4143668 VDS402F18900 18,900 .7441 77 101 3,3 153 50 20
4148565 VDS202F19000 4143669 VDS402F19000 19,000 .7480 77 101 3,3 153 50 20
4148566 VDS202F19100 4143670 VDS402F19100 19,100 .7520 77 101 3,3 153 50 20
4148567 VDS202F19200 4143671 VDS402F19200 19,200 .7559 77 101 3,3 153 50 20
4148568 VDS202F19300 4143672 VDS402F19300 19,300 .7598 77 101 3,4 153 50 20
4148569 VDS202F19400 4143673 VDS402F19400 19,400 .7638 77 101 3,4 153 50 20
4148570 VDS202F19500 4143674 VDS402F19500 19,500 .7677 77 101 3,4 153 50 20
4148571 VDS202F19600 4143675 VDS402F19600 19,600 .7717 77 101 3,4 153 50 20
4148572 VDS202F19700 4143676 VDS402F19700 19,700 .7756 77 101 3,4 153 50 20
4148573 VDS202F19800 4143677 VDS402F19800 19,800 .7795 77 101 3,4 153 50 20
4148574 VDS202F19900 4143678 VDS402F19900 19,900 .7835 77 101 3,5 153 50 20
4148575 VDS202F20000 4143679 VDS402F20000 20,000 .7874 77 101 3,5 153 50 20
WID_Master16_Holemaking_SolidCarbideDrills_T038_T039_Metric_REBRAND.indd 38 11/12/15 12:02 PM
T39
LViWID M 16 H l ki S lidC bid D ill T038 T039 M i REBRANDN b 1220159 26AM
widia.com
WU25PD
Solid Carbide Drills
VariDrill™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 8 x D
VDS403F • 8 x D
D1 diameter
grade WU25PD
TiAlN
order # catalogue # mm in L4 max L3 L5 L LS D
4144208 VDS403F03000 3,000 .1181 33 40 0,5 78 36 6
4144210 VDS403F03100 3,100 .1220 33 40 0,5 78 36 6
4144243 VDS403F03200 3,200 .1260 33 40 0,5 78 36 6
4144245 VDS403F03300 3,300 .1299 33 40 0,5 78 36 6
4144247 VDS403F03400 3,400 .1339 33 40 0,6 78 36 6
4144249 VDS403F03500 3,500 .1378 33 40 0,6 78 36 6
4144251 VDS403F03600 3,600 .1417 33 40 0,6 78 36 6
4144253 VDS403F03700 3,700 .1457 33 40 0,6 78 36 6
4144255 VDS403F03800 3,800 .1496 41 49 0,6 87 36 6
4144257 VDS403F03900 3,900 .1535 41 49 0,6 87 36 6
4144259 VDS403F04000 4,000 .1575 41 49 0,7 87 36 6
4144261 VDS403F04100 4,100 .1614 41 49 0,7 87 36 6
4144273 VDS403F04200 4,200 .1654 41 49 0,7 87 36 6
4144274 VDS403F04300 4,300 .1693 41 49 0,7 87 36 6
4144276 VDS403F04400 4,400 .1732 41 49 0,7 87 36 6
4144278 VDS403F04500 4,500 .1772 41 49 0,7 87 36 6
4144280 VDS403F04600 4,600 .1811 41 49 0,8 87 36 6
4144282 VDS403F04700 4,700 .1850 41 49 0,8 87 36 6
4144284 VDS403F04800 4,800 .1890 48 56 0,8 94 36 6
4144286 VDS403F04900 4,900 .1929 48 56 0,8 94 36 6
4144288 VDS403F05000 5,000 .1969 48 56 0,8 94 36 6
4144290 VDS403F05100 5,100 .2008 48 56 0,8 94 36 6
4144292 VDS403F05200 5,200 .2047 48 56 0,9 94 36 6
4144304 VDS403F05300 5,300 .2087 48 56 0,9 94 36 6
rst choice
alternate choice
(continued)
For information on L, L3, and L4 max, see page T143.
Solid Carbide Drills
WID_Master16_Holemaking_SolidCarbideDrills_T038_T039_Metric_REBRAND.indd 39 11/12/15 12:02 PM
T40
LViWID M 16 H l ki S lidC bid D ill T040 T041 M i REBRANDN b 12 20159 27AM
widia.com
WU25PD
Solid Carbide Drills
VariDrill™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 8 x D
(VDS403F • 8 x D — continued)
(continued)
Solid Carbide Drills
rst choice
alternate choice
D1 diameter
grade WU25PD
TiAlN
order # catalogue # mm in L4 max L3 L5 L LS D
4144306 VDS403F05400 5,400 .2126 48 56 0,9 94 36 6
4144307 VDS403F05500 5,500 .2165 48 56 0,9 94 36 6
4144308 VDS403F05600 5,600 .2205 48 56 0,9 94 36 6
4144309 VDS403F05700 5,700 .2244 48 56 1,0 94 36 6
4144310 VDS403F05800 5,800 .2283 48 56 1,0 94 36 6
4144311 VDS403F05900 5,900 .2323 48 56 1,0 94 36 6
4144312 VDS403F06000 6,000 .2362 48 56 1,0 94 36 6
4144313 VDS403F06100 6,100 .2402 57 67 1,0 105 36 8
4144314 VDS403F06200 6,200 .2441 57 67 1,0 105 36 8
4144315 VDS403F06300 6,300 .2480 57 67 1,1 105 36 8
4144316 VDS403F06400 6,400 .2520 57 67 1,1 105 36 8
4144317 VDS403F06500 6,500 .2559 57 67 1,1 105 36 8
4144318 VDS403F06600 6,600 .2598 57 67 1,1 105 36 8
4144319 VDS403F06700 6,700 .2638 57 67 1,1 105 36 8
4144320 VDS403F06800 6,800 .2677 57 67 1,1 105 36 8
4144321 VDS403F06900 6,900 .2717 57 67 1,2 105 36 8
4144322 VDS403F07000 7,000 .2756 57 67 1,2 105 36 8
4144343 VDS403F07100 7,100 .2795 61 72 1,2 110 36 8
4144344 VDS403F07200 7,200 .2835 61 72 1,2 110 36 8
4144345 VDS403F07300 7,300 .2874 61 72 1,2 110 36 8
4144346 VDS403F07400 7,400 .2913 61 72 1,3 110 36 8
4144347 VDS403F07500 7,500 .2953 61 72 1,3 110 36 8
4144348 VDS403F07600 7,600 .2992 61 72 1,3 110 36 8
4144349 VDS403F07700 7,700 .3031 61 72 1,3 110 36 8
4144350 VDS403F07800 7,800 .3071 61 72 1,3 110 36 8
4144351 VDS403F07900 7,900 .3110 61 72 1,3 110 36 8
4144352 VDS403F08000 8,000 .3150 61 72 1,4 110 36 8
4144363 VDS403F08100 8,100 .3189 68 80 1,4 122 40 10
4144364 VDS403F08200 8,200 .3228 68 80 1,4 122 40 10
4144365 VDS403F08300 8,300 .3268 68 80 1,4 122 40 10
4144366 VDS403F08400 8,400 .3307 68 80 1,4 122 40 10
4144367 VDS403F08500 8,500 .3346 68 80 1,4 122 40 10
4144368 VDS403F08600 8,600 .3386 68 80 1,5 122 40 10
4144369 VDS403F08700 8,700 .3425 68 80 1,5 122 40 10
4144370 VDS403F08800 8,800 .3465 68 80 1,5 122 40 10
4144371 VDS403F08900 8,900 .3504 68 80 1,5 122 40 10
4144372 VDS403F09000 9,000 .3543 68 80 1,5 122 40 10
4144373 VDS403F09100 9,100 .3583 68 80 1,5 122 40 10
4144374 VDS403F09200 9,200 .3622 68 80 1,6 122 40 10
4144375 VDS403F09300 9,300 .3661 68 80 1,6 122 40 10
WID_Master16_Holemaking_SolidCarbideDrills_T040_T041_Metric_REBRAND.indd 40 11/12/15 12:02 PM
T41
LViWID M 16 H l ki S lidC bid D ill T040 T041 M i REBRANDN b 1220159 27AM
widia.com
WU25PD
Solid Carbide Drills
VariDrill™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 8 x D
Solid Carbide Drills
(continued)
(VDS403F • 8 x D — continued)
rst choice
alternate choice
D1 diameter
grade WU25PD
TiAlN
order # catalogue # mm in L4 max L3 L5 L LS D
4144376 VDS403F09400 9,400 .3701 68 80 1,6 122 40 10
4144377 VDS403F09500 9,500 .3740 68 80 1,6 122 40 10
4144378 VDS403F09600 9,600 .3780 68 80 1,6 122 40 10
4144379 VDS403F09700 9,700 .3819 68 80 1,7 122 40 10
4144380 VDS403F09800 9,800 .3858 68 80 1,7 122 40 10
4144381 VDS403F09900 9,900 .3898 68 80 1,7 122 40 10
4144207 VDS403F10000 10,000 .3937 68 80 1,7 122 40 10
4143888 VDS403F10100 10,100 .3976 79 94 1,7 141 45 12
4143889 VDS403F10200 10,200 .4016 79 94 1,7 141 45 12
4143890 VDS403F10300 10,300 .4055 79 94 1,8 141 45 12
4143891 VDS403F10400 10,400 .4094 79 94 1,8 141 45 12
4143892 VDS403F10500 10,500 .4134 79 94 1,8 141 45 12
4144223 VDS403F10600 10,600 .4173 79 94 1,8 141 45 12
4144224 VDS403F10700 10,700 .4213 79 94 1,8 141 45 12
4144225 VDS403F10800 10,800 .4252 79 94 1,8 141 45 12
4144226 VDS403F10900 10,900 .4291 79 94 1,9 141 45 12
4144227 VDS403F11000 11,000 .4331 79 94 1,9 141 45 12
4144228 VDS403F11100 11,100 .4370 79 94 1,9 141 45 12
4144229 VDS403F11200 11,200 .4409 79 94 1,9 141 45 12
4144230 VDS403F11300 11,300 .4449 79 94 1,9 141 45 12
4144231 VDS403F11400 11,400 .4488 79 94 2,0 141 45 12
4144232 VDS403F11500 11,500 .4528 79 94 2,0 141 45 12
4144233 VDS403F11600 11,600 .4567 79 94 2,0 141 45 12
4144234 VDS403F11700 11,700 .4606 79 94 2,0 141 45 12
4144235 VDS403F11800 11,800 .4646 79 94 2,0 141 45 12
4144236 VDS403F11900 11,900 .4685 79 94 2,0 141 45 12
4144237 VDS403F12000 12,000 .4724 79 94 2,1 141 45 12
4144238 VDS403F12100 12,100 .4764 91 108 2,1 155 45 14
4144239 VDS403F12200 12,200 .4803 91 108 2,1 155 45 14
4144240 VDS403F12300 12,300 .4843 91 108 2,1 155 45 14
4144241 VDS403F12400 12,400 .4882 91 108 2,1 155 45 14
4144242 VDS403F12500 12,500 .4921 91 108 2,1 155 45 14
4144263 VDS403F12600 12,600 .4961 91 108 2,2 155 45 14
4144264 VDS403F12700 12,700 .5000 91 108 2,2 155 45 14
4144265 VDS403F12800 12,800 .5039 91 108 2,2 155 45 14
4144266 VDS403F12900 12,900 .5079 91 108 2,2 155 45 14
4144267 VDS403F13000 13,000 .5118 91 108 2,2 155 45 14
4144268 VDS403F13100 13,100 .5157 91 108 2,3 155 45 14
4144269 VDS403F13200 13,200 .5197 91 108 2,3 155 45 14
4144270 VDS403F13300 13,300 .5236 91 108 2,3 155 45 14
WID_Master16_Holemaking_SolidCarbideDrills_T040_T041_Metric_REBRAND.indd 41 11/12/15 12:02 PM
T42
LViWID M 16 H l ki S lidC bid D ill T042 T043 M i REBRANDN b 12 20159 28AM
widia.com
(continued)
(VDS403F • 8 x D — continued)
rst choice
alternate choice
Solid Carbide Drills
VariDrill™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 8 x D
Solid Carbide Drills
WU25PD
D1 diameter
grade WU25PD
TiAlN
order # catalogue # mm in L4 max L3 L5 L LS D
4144271 VDS403F13400 13,400 .5276 91 108 2,3 155 45 14
4144272 VDS403F13500 13,500 .5315 91 108 2,3 155 45 14
4144293 VDS403F13600 13,600 .5354 91 108 2,3 155 45 14
4144294 VDS403F13700 13,700 .5394 91 108 2,4 155 45 14
4144295 VDS403F13800 13,800 .5433 91 108 2,4 155 45 14
4144296 VDS403F13900 13,900 .5472 91 108 2,4 155 45 14
4144297 VDS403F14000 14,000 .5512 91 108 2,4 155 45 14
4144298 VDS403F14100 14,100 .5551 101 121 2,4 171 48 16
4144299 VDS403F14200 14,200 .5591 101 121 2,5 171 48 16
4144300 VDS403F14300 14,300 .5630 101 121 2,5 171 48 16
4144301 VDS403F14400 14,400 .5669 101 121 2,5 171 48 16
4144302 VDS403F14500 14,500 .5709 101 121 2,5 171 48 16
4144323 VDS403F14600 14,600 .5748 101 121 2,5 171 48 16
4144324 VDS403F14700 14,700 .5787 101 121 2,5 171 48 16
4144325 VDS403F14800 14,800 .5827 101 121 2,6 171 48 16
4144326 VDS403F14900 14,900 .5866 101 121 2,6 171 48 16
4144327 VDS403F15000 15,000 .5906 101 121 2,6 171 48 16
4144328 VDS403F15100 15,100 .5945 101 121 2,6 171 48 16
4144329 VDS403F15200 15,200 .5984 101 121 2,6 171 48 16
4144330 VDS403F15300 15,300 .6024 101 121 2,6 171 48 16
4144331 VDS403F15400 15,400 .6063 101 121 2,7 171 48 16
4144332 VDS403F15500 15,500 .6102 101 121 2,7 171 48 16
4144333 VDS403F15600 15,600 .6142 101 121 2,7 171 48 16
4144334 VDS403F15700 15,700 .6181 101 121 2,7 171 48 16
4144335 VDS403F15800 15,800 .6220 101 121 2,7 171 48 16
4144336 VDS403F15900 15,900 .6260 101 121 2,8 171 48 16
4144337 VDS403F16000 16,000 .6299 101 121 2,8 171 48 16
4144338 VDS403F16100 16,100 .6339 113 135 2,8 185 48 18
4144339 VDS403F16200 16,200 .6378 113 135 2,8 185 48 18
4144340 VDS403F16300 16,300 .6417 113 135 2,8 185 48 18
4144341 VDS403F16400 16,400 .6457 113 135 2,8 185 48 18
4144342 VDS403F16500 16,500 .6496 113 135 2,9 185 48 18
4144353 VDS403F16600 16,600 .6535 113 135 2,9 185 48 18
4144354 VDS403F16700 16,700 .6575 113 135 2,9 185 48 18
4144355 VDS403F16800 16,800 .6614 113 135 2,9 185 48 18
4144356 VDS403F16900 16,900 .6654 113 135 2,9 185 48 18
4144357 VDS403F17000 17,000 .6693 113 135 2,9 185 48 18
4144358 VDS403F17100 17,100 .6732 113 135 3,0 185 48 18
4144359 VDS403F17200 17,200 .6772 113 135 3,0 185 48 18
4144360 VDS403F17300 17,300 .6811 113 135 3,0 185 48 18
WID_Master16_Holemaking_SolidCarbideDrills_T042_T043_Metric_REBRAND.indd 42 11/12/15 12:02 PM
T43
LViWID M 16 H l ki S lidC bid D ill T042 T043 M i REBRANDN b 1220159 28AM
widia.com
(VDS403F • 8 x D — continued)
rst choice
alternate choice
Solid Carbide Drills
VariDrill™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 8 x D
Solid Carbide Drills
WU25PD
D1 diameter
grade WU25PD
TiAlN
order # catalogue # mm in L4 max L3 L5 L LS D
4144361 VDS403F17400 17,400 .6850 113 135 3,0 185 48 18
4144362 VDS403F17500 17,500 .6890 113 135 3,0 185 48 18
4144383 VDS403F17600 17,600 .6929 113 135 3,1 185 48 18
4144384 VDS403F17700 17,700 .6969 113 135 3,1 185 48 18
4144385 VDS403F17800 17,800 .7008 113 135 3,1 185 48 18
4144386 VDS403F17900 17,900 .7047 113 135 3,1 185 48 18
4144387 VDS403F18000 18,000 .7087 113 135 3,1 185 48 18
4144388 VDS403F18100 18,100 .7126 124 148 3,1 200 50 20
4144389 VDS403F18200 18,200 .7165 124 148 3,2 200 50 20
4144390 VDS403F18300 18,300 .7205 124 148 3,2 200 50 20
4144391 VDS403F18400 18,400 .7244 124 148 3,2 200 50 20
4144392 VDS403F18500 18,500 .7283 124 148 3,2 200 50 20
4144393 VDS403F18600 18,600 .7323 124 148 3,2 200 50 20
4144394 VDS403F18700 18,700 .7362 124 148 3,2 200 50 20
4144395 VDS403F18800 18,800 .7402 124 148 3,3 200 50 20
4144396 VDS403F18900 18,900 .7441 124 148 3,3 200 50 20
4144397 VDS403F19000 19,000 .7480 124 148 3,3 200 50 20
4144398 VDS403F19100 19,100 .7520 124 148 3,3 200 50 20
4144399 VDS403F19200 19,200 .7559 124 148 3,3 200 50 20
4144400 VDS403F19300 19,300 .7598 124 148 3,4 200 50 20
4144401 VDS403F19400 19,400 .7638 124 148 3,4 200 50 20
4144402 VDS403F19500 19,500 .7677 124 148 3,4 200 50 20
4144403 VDS403F19600 19,600 .7717 124 148 3,4 200 50 20
4144404 VDS403F19700 19,700 .7756 124 148 3,4 200 50 20
4144405 VDS403F19800 19,800 .7795 124 148 3,4 200 50 20
4144406 VDS403F19900 19,900 .7835 124 148 3,5 200 50 20
4144407 VDS403F20000 20,000 .7874 124 148 3,5 200 50 20
WID_Master16_Holemaking_SolidCarbideDrills_T042_T043_Metric_REBRAND.indd 43 11/12/15 12:02 PM
T44
LViWID M 16 H l ki S lidC bid D ill T044 T045 M i REBRANDO b 15 20153 30PM
widia.com
Solid Carbide Drills
Application Data • VariDrill™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys
VariDrill • VDS2_ Series • WU25PD
™
• Flood Coolant • Metric
Material
Group
Cutting Speed — vc Recommended Feed Rate (f) by Diameter
Range — m/min
min – max
Tool Diameter
(mm) 1,0 2,0 3,0 4,0 6,0 8,0 10,0 12,0 16,0 20,0
P
160 – 100 mm/r 0,04–0,09 0,05–0,12 0,07–0,14 0,08–0,16 0,11–0,22 0,13–0,26 0,15–0,31 0,18–0,35 0,22–0,42 0,28–0,54
2, 3, 4, 6, 7 50 – 90 mm/r 0,05–0,10 0,06–0,13 0,08–0,15 0,09–0,17 0,13–0,23 0,15–0,28 0,19–0,33 0,22–0,38 0,26–0,47 0,34–0,59
5, 9, 10, 11 50 – 100 mm/r 0,05–0,10 0,06–0,13 0,07–0,15 0,08–0,17 0,12–0,23 0,14–0,28 0,17–0,33 0,19–0,38 0,23–0,47 0,29–0,59
12, 13 30 – 60 mm/r 0,03–0,05 0,04–0,06 0,05–0,08 0,06–0,10 0,08–0,14 0,10–0,18 0,13–0,22 0,14–0,24 0,18–0,32 0,23–0,41
M
14.1 30 – 50 mm/r 0,02–0,05 0,03–0,06 0,04–0,07 0,05–0,09 0,08–0,11 0,09–0,12 0,10–0,14 0,12–0,16 0,14–0,18 0,16–0,20
14.3 40 – 60 mm/r 0,02–0,06 0,03–0,07 0,04–0,08 0,06–0,10 0,08–0,12 0,09–0,14 0,10–0,16 0,12–0,18 0,14–0,20 0,16–0,22
14.2, 14.4 30 – 50 mm/r 0,02–0,05 0,03–0,06 0,04–0,07 0,06–0,09 0,08–0,11 0,09–0,12 0,10–0,14 0,12–0,16 0,14–0,18 0,16–0,20
K
15, 16 70 – 150 mm/r 0,06–0,13 0,07–0,14 0,09–0,18 0,10–0,19 0,13–0,25 0,16–0,30 0,18–0,35 0,20–0,39 0,25–0,48 0,30–0,59
17, 18, 19 90 – 120 mm/r 0,08–0,11 0,09–0,12 0,10–0,13 0,10–0,15 0,13–0,20 0,16–0,25 0,18–0,29 0,20–0,32 0,25–0,38 0,30–0,48
20 80 – 120 mm/r 0,04–0,10 0,06–0,12 0,06–0,14 0,07–0,15 0,10–0,20 0,11–0,24 0,14–0,28 0,15–0,32 0,19–0,38 0,24–0,48
N
21 90 – 270 mm/r 0,05–0,12 0,06–0,13 0,08–0,14 0,10–0,16 0,12–0,20 0,16–0,24 0,20–0,28 0,24–0,32 0,28–0,40 0,32–0,48
22, 23, 24 90 – 270 mm/r 0,04–0,08 0,06–0,12 0,08–0,16 0,10–0,20 0,12–0,24 0,16–0,28 0,20–0,32 0,24–0,36 0,28–0,44 0,32–0,52
25 90 – 225 mm/r 0,10–0,13 0,11–0,14 0,12–0,14 0,13–0,16 0,14–0,20 0,16–0,24 0,20–0,28 0,24–0,32 0,28–0,40 0,32–0,44
26, 27, 28 90 – 270 mm/r 0,04–0,08 0,06–0,12 0,08–0,16 0,10–0,20 0,12–0,24 0,16–0,28 0,20–0,32 0,24–0,36 0,28–0,40 0,32–0,48
S
31, 32 20 – 30 mm/r 0,01–0,04 0,02–0,05 0,03–0,06 0,04–0,08 0,06–0,10 0,08–0,12 0,09–0,13 0,10–0,14 0,12–0,16 0,14–0,18
33, 34, 35 10 – 30 mm/r 0,01–0,03 0,02–0,03 0,02–0,04 0,03–0,06 0,05–0,08 0,07–0,10 0,08–0,11 0,09–0,12 0,10–0,14 0,11–0,16
36 20 – 40 mm/r 0,01–0,03 0,02–0,03 0,02–0,04 0,02–0,05 0,04–0,07 0,06–0,09 0,07–0,10 0,08–0,11 0,09–0,13 0,10–0,15
37 20 – 50 mm/r 0,01–0,03 0,02–0,03 0,02–0,04 0,03–0,06 0,05–0,08 0,07–0,10 0,08–0,11 0,09–0,12 0,10–0,14 0,11–0,16
Solid Carbide Drills
Metric
tolerance
nominal size range D1 tolerance D tolerance h6
1–3 0,000/-0,014 (h8) 0,000/-0,006
>3–6 0,000/-0,012 (h7) 0,000/-0,008
>6–10 0,000/-0,015 (h7) 0,000/-0,009
>10–18 0,000/-0,018 (h7) 0,000/-0,011
>18–20 0,000/-0,021 (h7) 0,000/-0,013
WID_Master16_Holemaking_SolidCarbideDrills_T044_T045_Metric_REBRAND.indd 44 10/29/15 1:21 PM
T45
LViWID M 16 H l ki S lidC bid D ill T044 T045 M i REBRANDO b 1520153 30PM
widia.com
Solid Carbide Drills
Application Data • VariDrill™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys
Metric
tolerance
nominal size range D1 tolerance D tolerance h6
1–3 0,000/-0,014 (h8) 0,000/-0,006
>3–6 0,000/-0,012 (h7) 0,000/-0,008
>6–10 0,000/-0,015 (h7) 0,000/-0,009
>10–18 0,000/-0,018 (h7) 0,000/-0,011
>18–20 0,000/-0,021 (h7) 0,000/-0,013
Solid Carbide Drills
VariDrill • VDS4_ Series • WU25PD
™
• Through Coolant • Metric
Material
Group
Cutting Speed — vc Recommended Feed Rate (f) by Diameter
Range — m/min
min – max
Tool Diameter
(mm) 1,0 2,0 3,0 4,0 6,0 8,0 10,0 12,0 16,0 20,0
P
170 – 140 mm/r 0,04–0,09 0,05–0,12 0,07–0,14 0,08–0,16 0,11–0,22 0,13–0,26 0,15–0,31 0,18–0,35 0,22–0,42 0,28–0,54
2, 3, 4, 6, 7 60 – 100 mm/r 0,05–0,10 0,06–0,13 0,08–0,15 0,09–0,17 0,13–0,23 0,15–0,28 0,19–0,33 0,22–0,38 0,26–0,47 0,34–0,59
5, 9, 10, 11 50 – 100 mm/r 0,05–0,10 0,06–0,13 0,07–0,15 0,08–0,17 0,12–0,23 0,14–0,28 0,17–0,33 0,19–0,38 0,23–0,47 0,29–0,59
12, 13 40 – 70 mm/r 0,03–0,05 0,04–0,06 0,05–0,08 0,06–0,10 0,08–0,14 0,10–0,18 0,13–0,22 0,14–0,24 0,18–0,32 0,23–0,41
M
14.1 30 – 50 mm/r 0,02–0,05 0,03–0,06 0,04–0,07 0,05–0,09 0,08–0,11 0,09–0,12 0,10–0,14 0,12–0,16 0,14–0,18 0,16–0,20
14.3 40 – 60 mm/r 0,02–0,06 0,03–0,07 0,04–0,08 0,06–0,10 0,08–0,12 0,09–0,14 0,10–0,16 0,12–0,18 0,14–0,20 0,16–0,22
14.2, 14.4 30 – 50 mm/r 0,02–0,05 0,03–0,06 0,04–0,07 0,06–0,09 0,08–0,11 0,09–0,12 0,10–0,14 0,12–0,16 0,14–0,18 0,16–0,20
K
15, 16 80 – 160 mm/r 0,07–0,14 0,08–0,15 0,10–0,20 0,11–0,22 0,14–0,28 0,18–0,34 0,21–0,40 0,23–0,44 0,28–0,54 0,34–0,67
17, 18, 19 90 – 140 mm/r 0,09–0,13 0,10–0,14 0,11–0,14 0,12–0,17 0,14–0,23 0,18–0,28 0,21–0,32 0,23–0,36 0,28–0,43 0,34–0,54
20 80 – 130 mm/r 0,05–0,12 0,06–0,14 0,07–0,15 0,08–0,17 0,11–0,23 0,13–0,27 0,15–0,32 0,17–0,36 0,22–0,43 0,27–0,54
N
21 90 – 315 mm/r 0,05–0,12 0,06–0,13 0,08–0,14 0,10–0,16 0,12–0,20 0,16–0,24 0,20–0,28 0,24–0,32 0,28–0,40 0,32–0,48
22, 23, 24 90 – 270 mm/r 0,04–0,08 0,06–0,12 0,08–0,16 0,10–0,20 0,12–0,24 0,16–0,28 0,20–0,32 0,24–0,36 0,28–0,44 0,32–0,52
25 90 – 270 mm/r 0,10–0,13 0,11–0,14 0,12–0,14 0,13–0,16 0,14–0,20 0,16–0,24 0,20–0,28 0,24–0,32 0,28–0,40 0,32–0,44
26, 27, 28 90 – 270 mm/r 0,04–0,08 0,06–0,12 0,08–0,16 0,10–0,20 0,12–0,24 0,16–0,28 0,20–0,32 0,24–0,36 0,28–0,40 0,32–0,48
S
31, 32 20 – 30 mm/r 0,01–0,04 0,02–0,05 0,03–0,06 0,04–0,08 0,06–0,10 0,08–0,12 0,09–0,13 0,10–0,14 0,12–0,16 0,14–0,18
33, 34, 35 10 – 30 mm/r 0,01–0,03 0,02–0,03 0,02–0,04 0,03–0,06 0,05–0,08 0,07–0,10 0,08–0,11 0,09–0,12 0,10–0,14 0,11–0,16
36 10 – 40 mm/r 0,01–0,03 0,02–0,03 0,02–0,04 0,02–0,05 0,04–0,07 0,06–0,09 0,07–0,10 0,08–0,11 0,09–0,13 0,10–0,15
37 10 – 40 mm/r 0,01–0,03 0,02–0,03 0,02–0,04 0,03–0,06 0,05–0,08 0,07–0,10 0,08–0,11 0,09–0,12 0,10–0,14 0,11–0,16
WID_Master16_Holemaking_SolidCarbideDrills_T044_T045_Metric_REBRAND.indd 45 10/29/15 1:21 PM
LViWID M 16 H l ki S lidC bid D ill T046 T047 M i REBRANDN b 12 20159 31AM
Primary Application
Engineered specifi cally to eliminate the need for a two-part operation
when drilling fl at-bottom holes or on an inclined surface:
• Drill fl at-bottom holes in one step.
• Eliminate the need to use both an end mill and a drill to machine a fl at
on an inclined surface.
• After full cylindrical engagement, the drills run at normal solid carbide
drilling parameters.
Features and Benefi ts
• Special Point-Thinning
– Increases centring capability.
– Improves chip formation and fl ow.
– Reduces cutting forces.
Product Portfolio
• The Flat-Bottom Drill product series TDF51* is pre-designed in four lengths and
available in two grades, WN15HD for non-ferrous materials, and WU20PD™ for
steel, iron, and stainless steel.
– TDF510* 1,5 x D
– TDF511* 3 x D
– TDF512* 5 x D
– TDF513* 8 x D
• Length variations and step drills available as engineered solutions.
Ordering Process
• Please contact your local Authorised Distributor for a quote.
• Four-Margin Design
– Increases contact with material at full diameter.
– Improves hold quality and drill stability in the cut.
– Enables interrupted cuts and inclined exits.
TDF Drills for Flat-Bottom Applications
(Available as Semi-Standards)
WID_Master16_Holemaking_SolidCarbideDrills_T046_T047_Metric_REBRAND.indd 46 11/12/15 12:02 PM
The VariDrill offers the ultimate solution for multipurpose drilling operations. Its advanced-point
geometry design enables less chipping on the cutting edge, resulting in longer tool life. It delivers
proper surface fi nish across multiple materials, including steel, stainless steel, cast iron, aluminium,
and high-temp alloys.
• WU25PD™ drilling grade for extremely high wear resistance and longer tool life.
• VariDrill core design offers free chip fl ow and chip evacuation, resulting in optimum hole quality.
• Broad portfolio of items, with more than 2,200 choices.
• Reconditioning options for extended tool life.
To learn more about the benefi ts of WIDIA™ VariDrill, contact your local distributor.
VariDrill™
For a Wide
Range of
Materials
WID_Master16_Holemaking_SolidCarbideDrills_T046_T047_Metric_REBRAND.indd 47 11/12/15 12:02 PM
T48
LViWID M 16 H l ki S lidC bid D ill T048 T049 M i REBRANDN b 12 20159 32AM
widia.com
• Designed for maximum productivity and longer tool life for steel and cast iron.
• Easy to choose and apply.
• One of the broadest ranges on the market for diameter selection,
length series, and coolant options.
• Highest metal removal rates possible without sacrifi cing tool life.
• Latest Victory™ grades from WIDIA.
Easy chip evacuation
Free chip fl ow and chip evacuation.
Minimised chip jamming
Special gash and fl ute form
for effective chip formation.
Excellent centring capability
Application-Specifi c Drilling •
WIDIA™ TOP DRILL S™ for Steel and Cast Iron
TOP DRILL S
TOP DRILL S is WIDIA’s line of solid carbide drills engineered to provide maximum performance
and superior fi nish for application-specifi c tasks. Available in two material applications,
TDS for steel and cast iron are each specially designed and coated to maximise output
and increase tool life — offering less cost-per-hole and greater productivity.
WID_Master16_Holemaking_SolidCarbideDrills_T048_T049_Metric_REBRAND.indd 48 11/12/15 12:02 PM
T49
LViWID M 16 H l ki S lidC bid D ill T048 T049 M i REBRANDN b 1220159 32AM
widia.com
TOP DRILL S™ for Steel
TOP DRILL S for steel is a high-performance solid carbide drill with an
application-specific design. Although the point geometry is strong enough to drill
stainless steel and cast iron, it is engineered to maximise performance when
drilling steel. The WP20PD™ grade, designed to resist high heat and wear, is the
latest in WIDIA™ technology. The two-margin design facilitates excellent hole
quality and less friction when drilling steel at high speeds.
TOP DRILL S for Cast Iron
TOP DRILL S for cast iron is designed with application-specific point geometry
for maximum performance in cast iron materials. The point features corner
chamfers that minimise breakout on exit holes. A four-margin design improves
hole straightness, increasing tool life and extending cross-hole and inclined
exit capabilities when drilling tough cast iron. The technologically advanced
WK15PD™ grade is specially engineered to withstand high wear.
WIDIA Advantage
• Application-specific geometry with the latest WIDIA grade technology.
• Lower cost-per-hole due to high MRR and long tool life.
• Consistent performance from internally controlled supply chain:
Powder > Rod > Grinding > Coating
• Part of the complete WIDIA holemaking solution.
• Broad range of standard lengths, diameters, and coolant options in one line,
including extensive intermediate metric, inch, fraction, and wire sizes.
WID_Master16_Holemaking_SolidCarbideDrills_T048_T049_Metric_REBRAND.indd 49 11/12/15 12:02 PM
T50
LViWID M 16 H l ki S lidC bid D ill T050 T051 M i REBRANDO b 15 20153 33PM
widia.com
WP20PD WK15PD
Solid Carbide Drills
TOP DRILL S™ without Through Coolant • Steel and Cast Iron
TDS202A • TDS212A • 5 x D
rst choice
alternate choice
(continued)
Solid Carbide Drills
D1 diameter
grade WP20PD
TiAlN
order # catalogue #
grade WK15PD
AlCrN
order # catalogue # mm in L L3 L4 max L5 LS D
4162258 TDS202A03000 4162417 TDS212A03000 3,000 .1181 66 28 23 0,5 36 6
4162259 TDS202A03048 4162418 TDS212A03048 3,048 .1200 66 28 23 0,5 36 6
4162260 TDS202A03100 4162419 TDS212A03100 3,100 .1220 66 28 23 0,5 36 6
4162261 TDS202A03175 4162420 TDS212A03175 3,175 .1250 66 28 23 0,5 36 6
4162262 TDS202A03200 4162421 TDS212A03200 3,200 .1260 66 28 23 0,5 36 6
4162283 TDS202A03264 4162422 TDS212A03264 3,264 .1285 66 28 23 0,5 36 6
4162284 TDS202A03300 4162543 TDS212A03300 3,300 .1299 66 28 23 0,5 36 6
4162285 TDS202A03400 4162544 TDS212A03400 3,400 .1339 66 28 23 0,6 36 6
4162286 TDS202A03455 4162545 TDS212A03455 3,455 .1360 66 28 23 0,6 36 6
4162287 TDS202A03500 4162546 TDS212A03500 3,500 .1378 66 28 23 0,6 36 6
4162288 TDS202A03571 4162547 TDS212A03571 3,571 .1406 66 28 23 0,6 36 6
4162289 TDS202A03600 4162548 TDS212A03600 3,600 .1417 66 28 23 0,6 36 6
4162290 TDS202A03658 4162549 TDS212A03658 3,658 .1440 66 28 23 0,6 36 6
4162291 TDS202A03700 4162550 TDS212A03700 3,700 .1457 66 28 23 0,6 36 6
4162292 TDS202A03734 4162551 TDS212A03734 3,734 .1470 66 28 23 0,6 36 6
4162293 TDS202A03800 4162552 TDS212A03800 3,800 .1496 74 36 29 0,6 36 6
4162294 TDS202A03900 4162553 TDS212A03900 3,900 .1535 74 36 29 0,6 36 6
4162295 TDS202A03970 4162554 TDS212A03970 3,970 .1563 74 36 29 0,7 36 6
4162296 TDS202A04000 4162555 TDS212A04000 4,000 .1575 74 36 29 0,7 36 6
4162297 TDS202A04039 4162556 TDS212A04039 4,039 .1590 74 36 29 0,7 36 6
4162298 TDS202A04090 4162557 TDS212A04090 4,090 .1610 74 36 29 0,7 36 6
4162299 TDS202A04100 4162558 TDS212A04100 4,100 .1614 74 36 29 0,7 36 6
4162300 TDS202A04200 4162559 TDS212A04200 4,200 .1654 74 36 29 0,7 36 6
4162301 TDS202A04217 4162560 TDS212A04217 4,217 .1660 74 36 29 0,7 36 6
For information on L, L3, and L4 max, see page T143.
WID_Master16_Holemaking_SolidCarbideDrills_T050_T051_Metric_REBRAND.indd 50 10/29/15 1:22 PM
T51
LViWID M 16 H l ki S lidC bid D ill T050 T051 M i REBRANDO b 1520153 33PM
widia.com
WP20PD WK15PD
(TDS202A • TDS212A • 5 x D — continued)
(continued)
Solid Carbide Drills
TOP DRILL S™ without Through Coolant • Steel and Cast Iron
rst choice
alternate choice
Solid Carbide Drills
D1 diameter
grade WP20PD
TiAlN
order # catalogue #
grade WK15PD
AlCrN
order # catalogue # mm in L L3 L4 max L5 LS D
4162302 TDS202A04300 4162561 TDS212A04300 4,300 .1693 74 36 29 0,7 36 6
4162303 TDS202A04366 4162562 TDS212A04366 4,366 .1719 74 36 29 0,7 36 6
4162304 TDS202A04400 4162563 TDS212A04400 4,400 .1732 74 36 29 0,7 36 6
4162305 TDS202A04500 4162564 TDS212A04500 4,500 .1772 74 36 29 0,7 36 6
4162306 TDS202A04600 4162565 TDS212A04600 4,600 .1811 74 36 29 0,8 36 6
4162307 TDS202A04623 4162566 TDS212A04623 4,623 .1820 74 36 29 0,8 36 6
4162308 TDS202A04700 4162567 TDS212A04700 4,700 .1850 74 36 29 0,8 36 6
4162309 TDS202A04763 4162568 TDS212A04763 4,763 .1875 82 44 35 0,8 36 6
4162310 TDS202A04800 4162569 TDS212A04800 4,800 .1890 82 44 35 0,8 36 6
4162311 TDS202A04852 4162570 TDS212A04852 4,852 .1910 82 44 35 0,8 36 6
4162312 TDS202A04900 4162571 TDS212A04900 4,900 .1929 82 44 35 0,8 36 6
4162313 TDS202A05000 4162572 TDS212A05000 5,000 .1969 82 44 35 0,8 36 6
4162314 TDS202A05100 4162573 TDS212A05100 5,100 .2008 82 44 35 0,8 36 6
4162315 TDS202A05106 4162574 TDS212A05106 5,106 .2010 82 44 35 0,8 36 6
4162316 TDS202A05159 4162575 TDS212A05159 5,159 .2031 82 44 35 0,9 36 6
4162317 TDS202A05200 4162576 TDS212A05200 5,200 .2047 82 44 35 0,9 36 6
4162318 TDS202A05300 4162577 TDS212A05300 5,300 .2087 82 44 35 0,9 36 6
4162319 TDS202A05400 4162578 TDS212A05400 5,400 .2126 82 44 35 0,9 36 6
4162320 TDS202A05410 4162579 TDS212A05410 5,410 .2130 82 44 35 0,9 36 6
4162321 TDS202A05500 4162580 TDS212A05500 5,500 .2165 82 44 35 0,9 36 6
4162322 TDS202A05558 4162581 TDS212A05558 5,558 .2188 82 44 35 0,9 36 6
4162323 TDS202A05600 4162582 TDS212A05600 5,600 .2205 82 44 35 0,9 36 6
4162324 TDS202A05616 4162583 TDS212A05616 5,616 .2211 82 44 35 0,9 36 6
4162325 TDS202A05700 4162584 TDS212A05700 5,700 .2244 82 44 35 1,0 36 6
4162326 TDS202A05800 4162585 TDS212A05800 5,800 .2283 82 44 35 1,0 36 6
4162327 TDS202A05900 4162586 TDS212A05900 5,900 .2323 82 44 35 1,0 36 6
4162328 TDS202A05954 4162587 TDS212A05954 5,954 .2344 82 44 35 1,0 36 6
4162329 TDS202A06000 4162588 TDS212A06000 6,000 .2362 82 44 35 1,0 36 6
4162330 TDS202A06100 4162589 TDS212A06100 6,100 .2402 91 53 43 1,0 36 8
4162331 TDS202A06200 4162590 TDS212A06200 6,200 .2441 91 53 43 1,0 36 8
4162332 TDS202A06300 4162591 TDS212A06300 6,300 .2480 91 53 43 1,1 36 8
4162333 TDS202A06350 4162592 TDS212A06350 6,350 .2500 91 53 43 1,1 36 8
4162334 TDS202A06400 4162593 TDS212A06400 6,400 .2520 91 53 43 1,1 36 8
4162335 TDS202A06500 4162594 TDS212A06500 6,500 .2559 91 53 43 1,1 36 8
4162336 TDS202A06528 4162595 TDS212A06528 6,528 .2570 91 53 43 1,1 36 8
4162337 TDS202A06600 4162596 TDS212A06600 6,600 .2598 91 53 43 1,1 36 8
4162338 TDS202A06630 4162597 TDS212A06630 6,630 .2610 91 53 43 1,1 36 8
4162339 TDS202A06700 4162598 TDS212A06700 6,700 .2638 91 53 43 1,1 36 8
4162340 TDS202A06746 4162599 TDS212A06746 6,746 .2656 91 53 43 1,1 36 8
4148908 TDS202A06800 4148983 TDS212A06800 6,800 .2677 91 53 43 1,1 36 8
WID_Master16_Holemaking_SolidCarbideDrills_T050_T051_Metric_REBRAND.indd 51 10/29/15 1:22 PM
T52
LViWID M 16 H l ki S lidC bid D ill T052 T053 M i REBRANDN b 10 20152 56PM
widia.com
(TDS202A • TDS212A • 5 x D — continued)
(continued)
Solid Carbide Drills
TOP DRILL S™ without Through Coolant • Steel and Cast Iron
rst choice
alternate choice
WP20PD WK15PD
Solid Carbide Drills
D1 diameter
grade WP20PD
TiAlN
order # catalogue #
grade WK15PD
AlCrN
order # catalogue # mm in L L3 L4 max L5 LS D
4162341 TDS202A06900 4162600 TDS212A06900 6,900 .2717 91 53 43 1,2 36 8
4162342 TDS202A07000 4162601 TDS212A07000 7,000 .2756 91 53 43 1,2 36 8
4162343 TDS202A07100 4162602 TDS212A07100 7,100 .2795 91 53 43 1,2 36 8
4162344 TDS202A07145 4162603 TDS212A07145 7,145 .2813 91 53 43 1,2 36 8
4162345 TDS202A07200 4162604 TDS212A07200 7,200 .2835 91 53 43 1,2 36 8
4162346 TDS202A07300 4162605 TDS212A07300 7,300 .2874 91 53 43 1,2 36 8
4162347 TDS202A07400 4162606 TDS212A07400 7,400 .2913 91 53 43 1,3 36 8
4162348 TDS202A07500 4162607 TDS212A07500 7,500 .2953 91 53 43 1,3 36 8
4162349 TDS202A07541 4162608 TDS212A07541 7,541 .2969 91 53 43 1,3 36 8
4162350 TDS202A07600 4162609 TDS212A07600 7,600 .2992 91 53 43 1,3 36 8
4162351 TDS202A07700 4162610 TDS212A07700 7,700 .3031 91 53 43 1,3 36 8
4162352 TDS202A07800 4162611 TDS212A07800 7,800 .3071 91 53 43 1,3 36 8
4162353 TDS202A07900 4162612 TDS212A07900 7,900 .3110 91 53 43 1,3 36 8
4162354 TDS202A07938 4162613 TDS212A07938 7,938 .3125 91 53 43 1,3 36 8
4162355 TDS202A08000 4162614 TDS212A08000 8,000 .3150 91 53 43 1,4 36 8
4162356 TDS202A08100 4162615 TDS212A08100 8,100 .3189 103 61 49 1,4 40 10
4162357 TDS202A08200 4162616 TDS212A08200 8,200 .3228 103 61 49 1,4 40 10
4162358 TDS202A08300 4162617 TDS212A08300 8,300 .3268 103 61 49 1,4 40 10
4162359 TDS202A08334 4162618 TDS212A08334 8,334 .3281 103 61 49 1,4 40 10
4162360 TDS202A08400 4162619 TDS212A08400 8,400 .3307 103 61 49 1,4 40 10
4162361 TDS202A08433 4162620 TDS212A08433 8,433 .3320 103 61 49 1,4 40 10
4162362 TDS202A08500 4162621 TDS212A08500 8,500 .3346 103 61 49 1,4 40 10
4162363 TDS202A08600 4162622 TDS212A08600 8,600 .3386 103 61 49 1,5 40 10
4162364 TDS202A08700 4162623 TDS212A08700 8,700 .3425 103 61 49 1,5 40 10
4162365 TDS202A08733 4162624 TDS212A08733 8,733 .3438 103 61 49 1,5 40 10
4162366 TDS202A08800 4162625 TDS212A08800 8,800 .3465 103 61 49 1,5 40 10
4162367 TDS202A08900 4162626 TDS212A08900 8,900 .3504 103 61 49 1,5 40 10
4162368 TDS202A09000 4162627 TDS212A09000 9,000 .3543 103 61 49 1,5 40 10
4162369 TDS202A09100 4162628 TDS212A09100 9,100 .3583 103 61 49 1,5 40 10
4162370 TDS202A09129 4162629 TDS212A09129 9,129 .3594 103 61 49 1,6 40 10
4162371 TDS202A09200 4162630 TDS212A09200 9,200 .3622 103 61 49 1,6 40 10
4162372 TDS202A09300 4162631 TDS212A09300 9,300 .3661 103 61 49 1,6 40 10
4162373 TDS202A09347 4162632 TDS212A09347 9,347 .3680 103 61 49 1,6 40 10
4162374 TDS202A09400 4162633 TDS212A09400 9,400 .3701 103 61 49 1,6 40 10
4162375 TDS202A09500 4162634 TDS212A09500 9,500 .3740 103 61 49 1,6 40 10
4162376 TDS202A09525 4162635 TDS212A09525 9,525 .3750 103 61 49 1,6 40 10
4162377 TDS202A09600 4162636 TDS212A09600 9,600 .3780 103 61 49 1,6 40 10
4162378 TDS202A09700 4162637 TDS212A09700 9,700 .3819 103 61 49 1,7 40 10
4162379 TDS202A09800 4162638 TDS212A09800 9,800 .3858 103 61 49 1,7 40 10
4162380 TDS202A09900 4162639 TDS212A09900 9,900 .3898 103 61 49 1,7 40 10
WID_Master16_Holemaking_SolidCarbideDrills_T052_T053_Metric_REBRAND.indd 52 11/10/15 5:02 PM
T53
LViWID M 16 H l ki S lidC bid D ill T052 T053 M i REBRANDN b 1020152 56PM
widia.com
(TDS202A • TDS212A • 5 x D — continued)
(continued)
Solid Carbide Drills
TOP DRILL S™ without Through Coolant • Steel and Cast Iron
rst choice
alternate choice
WP20PD WK15PD
Solid Carbide Drills
D1 diameter
grade WP20PD
TiAlN
order # catalogue #
grade WK15PD
AlCrN
order # catalogue # mm in L L3 L4 max L5 LS D
4162381 TDS202A09921 4162640 TDS212A09921 9,921 .3906 103 61 49 1,7 40 10
4167196 TDS202A10000 4162408 TDS212A10000 10,000 .3937 103 61 49 1,7 40 10
4167198 TDS202A10100 4162409 TDS212A10100 10,100 .3976 118 71 56 1,7 45 12
4167199 TDS202A10200 4162410 TDS212A10200 10,200 .4016 118 71 56 1,7 45 12
4167200 TDS202A10300 4162411 TDS212A10300 10,300 .4055 118 71 56 1,8 45 12
4167201 TDS202A10320 4162412 TDS212A10320 10,320 .4063 118 71 56 1,8 45 12
4167202 TDS202A10400 4162423 TDS212A10400 10,400 .4094 118 71 56 1,8 45 12
4167203 TDS202A10500 4162424 TDS212A10500 10,500 .4134 118 71 56 1,8 45 12
4167204 TDS202A10600 4162425 TDS212A10600 10,600 .4173 118 71 56 1,8 45 12
4167205 TDS202A10700 4162426 TDS212A10700 10,700 .4213 118 71 56 1,8 45 12
4167206 TDS202A10716 4162427 TDS212A10716 10,716 .4219 118 71 56 1,8 45 12
4167207 TDS202A10800 4162428 TDS212A10800 10,800 .4252 118 71 56 1,8 45 12
4167208 TDS202A10900 4162429 TDS212A10900 10,900 .4291 118 71 56 1,9 45 12
4167209 TDS202A11000 4162430 TDS212A11000 11,000 .4331 118 71 56 1,9 45 12
4167210 TDS202A11100 4162431 TDS212A11100 11,100 .4370 118 71 56 1,9 45 12
4167211 TDS202A11113 4162432 TDS212A11113 11,113 .4375 118 71 56 1,9 45 12
4167212 TDS202A11200 4162433 TDS212A11200 11,200 .4409 118 71 56 1,9 45 12
4167213 TDS202A11300 4162434 TDS212A11300 11,300 .4449 118 71 56 1,9 45 12
4167214 TDS202A11400 4162435 TDS212A11400 11,400 .4488 118 71 56 2,0 45 12
4167215 TDS202A11500 4162436 TDS212A11500 11,500 .4528 118 71 56 2,0 45 12
4167216 TDS202A11509 4162437 TDS212A11509 11,509 .4531 118 71 56 2,0 45 12
4167217 TDS202A11600 4162438 TDS212A11600 11,600 .4567 118 71 56 2,0 45 12
4167218 TDS202A11700 4162439 TDS212A11700 11,700 .4606 118 71 56 2,0 45 12
4167219 TDS202A11800 4162440 TDS212A11800 11,800 .4646 118 71 56 2,0 45 12
4167220 TDS202A11900 4162441 TDS212A11900 11,900 .4685 118 71 56 2,0 45 12
4167221 TDS202A11908 4162442 TDS212A11908 11,908 .4688 118 71 56 2,0 45 12
4167222 TDS202A12000 4162443 TDS212A12000 12,000 .4724 118 71 56 2,1 45 12
4167223 TDS202A12100 4162444 TDS212A12100 12,100 .4764 124 77 60 2,1 45 14
4167224 TDS202A12200 4162445 TDS212A12200 12,200 .4803 124 77 60 2,1 45 14
4167225 TDS202A12300 4162446 TDS212A12300 12,300 .4843 124 77 60 2,1 45 14
4167226 TDS202A12304 4162447 TDS212A12304 12,304 .4844 124 77 60 2,1 45 14
4167227 TDS202A12400 4162448 TDS212A12400 12,400 .4882 124 77 60 2,1 45 14
4167228 TDS202A12500 4162449 TDS212A12500 12,500 .4921 124 77 60 2,1 45 14
4167229 TDS202A12600 4162450 TDS212A12600 12,600 .4961 124 77 60 2,2 45 14
4167230 TDS202A12700 4162451 TDS212A12700 12,700 .5000 124 77 60 2,2 45 14
4167231 TDS202A12800 4162452 TDS212A12800 12,800 .5039 124 77 60 2,2 45 14
4167232 TDS202A12900 4162453 TDS212A12900 12,900 .5079 124 77 60 2,2 45 14
4167233 TDS202A13000 4162454 TDS212A13000 13,000 .5118 124 77 60 2,2 45 14
4167234 TDS202A13096 4162455 TDS212A13096 13,096 .5156 124 77 60 2,3 45 14
4167235 TDS202A13100 4162456 TDS212A13100 13,100 .5157 124 77 60 2,3 45 14
WID_Master16_Holemaking_SolidCarbideDrills_T052_T053_Metric_REBRAND.indd 53 11/10/15 5:02 PM
T54
LViWID M 16 H l ki S lidC bid D ill T054 T055 M i REBRANDO b 15 20153 35PM
widia.com
(TDS202A • TDS212A • 5 x D — continued)
(continued)
Solid Carbide Drills
TOP DRILL S™ without Through Coolant • Steel and Cast Iron
rst choice
alternate choice
WP20PD WK15PD
Solid Carbide Drills
D1 diameter
grade WP20PD
TiAlN
order # catalogue #
grade WK15PD
AlCrN
order # catalogue # mm in L L3 L4 max L5 LS D
4167236 TDS202A13200 4162457 TDS212A13200 13,200 .5197 124 77 60 2,3 45 14
4167237 TDS202A13300 4162458 TDS212A13300 13,300 .5236 124 77 60 2,3 45 14
4167238 TDS202A13400 4162459 TDS212A13400 13,400 .5276 124 77 60 2,3 45 14
4167239 TDS202A13500 4162460 TDS212A13500 13,500 .5315 124 77 60 2,3 45 14
4167240 TDS202A13600 4162461 TDS212A13600 13,600 .5354 124 77 60 2,3 45 14
4167241 TDS202A13700 4162462 TDS212A13700 13,700 .5394 124 77 60 2,4 45 14
4167242 TDS202A13800 4162463 TDS212A13800 13,800 .5433 124 77 60 2,4 45 14
4167243 TDS202A13891 4162464 TDS212A13891 13,891 .5469 124 77 60 2,4 45 14
4167244 TDS202A13900 4162465 TDS212A13900 13,900 .5472 124 77 60 2,4 45 14
4167245 TDS202A14000 4162466 TDS212A14000 14,000 .5512 124 77 60 2,4 45 14
4167246 TDS202A14100 4162467 TDS212A14100 14,100 .5551 133 83 63 2,4 48 16
4167247 TDS202A14200 4162468 TDS212A14200 14,200 .5591 133 83 63 2,5 48 16
4167248 TDS202A14288 4162469 TDS212A14288 14,288 .5625 133 83 63 2,5 48 16
4167249 TDS202A14300 4162470 TDS212A14300 14,300 .5630 133 83 63 2,5 48 16
4167250 TDS202A14400 4162471 TDS212A14400 14,400 .5669 133 83 63 2,5 48 16
4167251 TDS202A14500 4162472 TDS212A14500 14,500 .5709 133 83 63 2,5 48 16
4167252 TDS202A14600 4162473 TDS212A14600 14,600 .5748 133 83 63 2,5 48 16
4167253 TDS202A14684 4162474 TDS212A14684 14,684 .5781 133 83 63 2,5 48 16
4167254 TDS202A14700 4162475 TDS212A14700 14,700 .5787 133 83 63 2,5 48 16
4167255 TDS202A14800 4162476 TDS212A14800 14,800 .5827 133 83 63 2,6 48 16
4167256 TDS202A14900 4162477 TDS212A14900 14,900 .5866 133 83 63 2,6 48 16
4167257 TDS202A15000 4162478 TDS212A15000 15,000 .5906 133 83 63 2,6 48 16
4167258 TDS202A15083 4162479 TDS212A15083 15,083 .5938 133 83 63 2,6 48 16
4167259 TDS202A15100 4162480 TDS212A15100 15,100 .5945 133 83 63 2,6 48 16
4167260 TDS202A15200 4162481 TDS212A15200 15,200 .5984 133 83 63 2,6 48 16
4167261 TDS202A15300 4162482 TDS212A15300 15,300 .6024 133 83 63 2,6 48 16
4167262 TDS202A15400 4162483 TDS212A15400 15,400 .6063 133 83 63 2,7 48 16
4167263 TDS202A15479 4162484 TDS212A15479 15,479 .6094 133 83 63 2,7 48 16
4167264 TDS202A15500 4162485 TDS212A15500 15,500 .6102 133 83 63 2,7 48 16
4167265 TDS202A15600 4162486 TDS212A15600 15,600 .6142 133 83 63 2,7 48 16
4167266 TDS202A15700 4162487 TDS212A15700 15,700 .6181 133 83 63 2,7 48 16
4167267 TDS202A15800 4162488 TDS212A15800 15,800 .6220 133 83 63 2,7 48 16
4167268 TDS202A15875 4162489 TDS212A15875 15,875 .6250 133 83 63 2,7 48 16
4167269 TDS202A15900 4162490 TDS212A15900 15,900 .6260 133 83 63 2,8 48 16
4167270 TDS202A16000 4162491 TDS212A16000 16,000 .6299 133 83 63 2,8 48 16
4167271 TDS202A16100 4162492 TDS212A16100 16,100 .6339 143 93 71 2,8 48 18
4167272 TDS202A16200 4162493 TDS212A16200 16,200 .6378 143 93 71 2,8 48 18
4167273 TDS202A16271 4162494 TDS212A16271 16,271 .6406 143 93 71 2,8 48 18
4167274 TDS202A16300 4162495 TDS212A16300 16,300 .6417 143 93 71 2,8 48 18
4167275 TDS202A16400 4162496 TDS212A16400 16,400 .6457 143 93 71 2,8 48 18
WID_Master16_Holemaking_SolidCarbideDrills_T054_T055_Metric_REBRAND.indd 54 10/29/15 1:22 PM
T55
LViWID M 16 H l ki S lidC bid D ill T054 T055 M i REBRANDO b 1520153 35PM
widia.com
(TDS202A • TDS212A • 5 x D — continued)
Solid Carbide Drills
TOP DRILL S™ without Through Coolant • Steel and Cast Iron
rst choice
alternate choice
WP20PD WK15PD
Solid Carbide Drills
D1 diameter
grade WP20PD
TiAlN
order # catalogue #
grade WK15PD
AlCrN
order # catalogue # mm in L L3 L4 max L5 LS D
4167276 TDS202A16500 4162497 TDS212A16500 16,500 .6496 143 93 71 2,9 48 18
4167277 TDS202A16600 4162498 TDS212A16600 16,600 .6535 143 93 71 2,9 48 18
4167278 TDS202A16670 4162499 TDS212A16670 16,670 .6563 143 93 71 2,9 48 18
4167279 TDS202A16700 4162500 TDS212A16700 16,700 .6575 143 93 71 2,9 48 18
4167280 TDS202A16800 4162501 TDS212A16800 16,800 .6614 143 93 71 2,9 48 18
4167281 TDS202A16900 4162502 TDS212A16900 16,900 .6654 143 93 71 2,9 48 18
4167282 TDS202A17000 4162503 TDS212A17000 17,000 .6693 143 93 71 2,9 48 18
4167283 TDS202A17100 4162504 TDS212A17100 17,100 .6732 143 93 71 3,0 48 18
4167284 TDS202A17200 4162505 TDS212A17200 17,200 .6772 143 93 71 3,0 48 18
4167285 TDS202A17300 4162506 TDS212A17300 17,300 .6811 143 93 71 3,0 48 18
4167286 TDS202A17400 4162507 TDS212A17400 17,400 .6850 143 93 71 3,0 48 18
4167287 TDS202A17463 4162508 TDS212A17463 17,463 .6875 143 93 71 3,0 48 18
4167288 TDS202A17500 4162509 TDS212A17500 17,500 .6890 143 93 71 3,0 48 18
4167289 TDS202A17600 4162510 TDS212A17600 17,600 .6929 143 93 71 3,1 48 18
4167290 TDS202A17700 4162511 TDS212A17700 17,700 .6969 143 93 71 3,1 48 18
4167291 TDS202A17800 4162512 TDS212A17800 17,800 .7008 143 93 71 3,1 48 18
4167292 TDS202A17859 4162513 TDS212A17859 17,859 .7031 143 93 71 3,1 48 18
4167293 TDS202A17900 4162514 TDS212A17900 17,900 .7047 143 93 71 3,1 48 18
4163313 TDS202A18000 4160528 TDS212A18000 18,000 .7087 143 93 71 3,1 48 18
4163314 TDS202A18100 4160464 TDS212A18100 18,100 .7126 153 101 77 3,1 50 20
4163305 TDS202A18200 4160465 TDS212A18200 18,200 .7165 153 101 77 3,2 50 20
4163306 TDS202A18258 4160466 TDS212A18258 18,258 .7188 153 101 77 3,2 50 20
4163307 TDS202A18300 4160467 TDS212A18300 18,300 .7205 153 101 77 3,2 50 20
4163308 TDS202A18400 4160468 TDS212A18400 18,400 .7244 153 101 77 3,2 50 20
4163309 TDS202A18500 4160469 TDS212A18500 18,500 .7283 153 101 77 3,2 50 20
4163310 TDS202A18600 4160470 TDS212A18600 18,600 .7323 153 101 77 3,2 50 20
4163311 TDS202A18654 4160471 TDS212A18654 18,654 .7344 153 101 77 3,2 50 20
4163312 TDS202A18700 4160472 TDS212A18700 18,700 .7362 153 101 77 3,2 50 20
4163323 TDS202A18800 4160583 TDS212A18800 18,800 .7402 153 101 77 3,3 50 20
4163324 TDS202A18900 4160584 TDS212A18900 18,900 .7441 153 101 77 3,3 50 20
4163325 TDS202A19000 4160585 TDS212A19000 19,000 .7480 153 101 77 3,3 50 20
4163326 TDS202A19050 4160586 TDS212A19050 19,050 .7500 153 101 77 3,3 50 20
4163327 TDS202A19100 4160587 TDS212A19100 19,100 .7520 153 101 77 3,3 50 20
4163328 TDS202A19200 4160588 TDS212A19200 19,200 .7559 153 101 77 3,3 50 20
4163329 TDS202A19300 4160589 TDS212A19300 19,300 .7598 153 101 77 3,4 50 20
4163330 TDS202A19400 4160590 TDS212A19400 19,400 .7638 153 101 77 3,4 50 20
4163331 TDS202A19500 4160591 TDS212A19500 19,500 .7677 153 101 77 3,4 50 20
4163332 TDS202A19600 4160592 TDS212A19600 19,600 .7717 153 101 77 3,4 50 20
4163333 TDS202A19700 4160593 TDS212A19700 19,700 .7756 153 101 77 3,4 50 20
4163334 TDS202A19800 4160594 TDS212A19800 19,800 .7795 153 101 77 3,4 50 20
4163335 TDS202A19900 4160595 TDS212A19900 19,900 .7835 153 101 77 3,5 50 20
4163336 TDS202A20000 4160596 TDS212A20000 20,000 .7874 153 101 77 3,5 50 20
WID_Master16_Holemaking_SolidCarbideDrills_T054_T055_Metric_REBRAND.indd 55 10/29/15 1:22 PM
T56
LViWID M 16 H l ki S lidC bid D ill T056 T057 M i REBRANDO b 15 20153 36PM
widia.com
WP20PD WK15PD
Solid Carbide Drills
TOP DRILL S™ with Through Coolant • Steel and Cast Iron
TDS401A • TDS411A • 3 x D
rst choice
alternate choice
(continued)
Solid Carbide Drills
D1 diameter
grade WP20PD
TiAlN
order # catalogue #
grade WK15PD
AlCrN
order # catalogue # mm in L L3 L4 max L5 LS D
4163315 TDS401A03000 4157799 TDS411A03000 3,000 .1181 62 20 14 0,5 36 6
4163337 TDS401A03048 4157800 TDS411A03048 3,048 .1200 62 20 14 0,5 36 6
4163338 TDS401A03100 4157801 TDS411A03100 3,100 .1220 62 20 14 0,5 36 6
4163339 TDS401A03175 4157802 TDS411A03175 3,175 .1250 62 20 14 0,5 36 6
4163340 TDS401A03200 4157803 TDS411A03200 3,200 .1260 62 20 14 0,5 36 6
4163341 TDS401A03264 4157804 TDS411A03264 3,264 .1285 62 20 14 0,5 36 6
4163342 TDS401A03300 4157805 TDS411A03300 3,300 .1299 62 20 14 0,5 36 6
4163463 TDS401A03400 4157806 TDS411A03400 3,400 .1339 62 20 14 0,6 36 6
4163464 TDS401A03455 4157807 TDS411A03455 3,455 .1360 62 20 14 0,6 36 6
4163465 TDS401A03500 4157808 TDS411A03500 3,500 .1378 62 20 14 0,6 36 6
4163466 TDS401A03571 4157809 TDS411A03571 3,571 .1406 62 20 14 0,6 36 6
4163467 TDS401A03600 4157810 TDS411A03600 3,600 .1417 62 20 14 0,6 36 6
4163468 TDS401A03658 4157811 TDS411A03658 3,658 .1440 62 20 14 0,6 36 6
4163469 TDS401A03700 4157812 TDS411A03700 3,700 .1457 62 20 14 0,6 36 6
4163470 TDS401A03734 4157813 TDS411A03734 3,734 .1470 62 20 14 0,6 36 6
4163471 TDS401A03800 4157814 TDS411A03800 3,800 .1496 66 24 17 0,6 36 6
4163472 TDS401A03900 4157815 TDS411A03900 3,900 .1535 66 24 17 0,6 36 6
4163473 TDS401A03970 4157816 TDS411A03970 3,970 .1563 66 24 17 0,7 36 6
4163474 TDS401A04000 4157817 TDS411A04000 4,000 .1575 66 24 17 0,7 36 6
4163475 TDS401A04039 4157818 TDS411A04039 4,039 .1590 66 24 17 0,7 36 6
4163476 TDS401A04090 4157819 TDS411A04090 4,090 .1610 66 24 17 0,7 36 6
4163477 TDS401A04100 4157820 TDS411A04100 4,100 .1614 66 24 17 0,7 36 6
4163478 TDS401A04200 4157821 TDS411A04200 4,200 .1654 66 24 17 0,7 36 6
4163479 TDS401A04217 4157822 TDS411A04217 4,217 .1660 66 24 17 0,7 36 6
For information on L, L3, and L4 max, see page T143.
WID_Master16_Holemaking_SolidCarbideDrills_T056_T057_Metric_REBRAND.indd 56 10/29/15 1:22 PM
T57
LViWID M 16 H l ki S lidC bid D ill T056 T057 M i REBRANDO b 1520153 36PM
widia.com
WP20PD WK15PD
(TDS401A • TDS411A • 3 x D — continued)
(continued)
Solid Carbide Drills
TOP DRILL S™ with Through Coolant • Steel and Cast Iron
rst choice
alternate choice
Solid Carbide Drills
D1 diameter
grade WP20PD
TiAlN
order # catalogue #
grade WK15PD
AlCrN
order # catalogue # mm in L L3 L4 max L5 LS D
4163480 TDS401A04300 4157823 TDS411A04300 4,300 .1693 66 24 17 0,7 36 6
4163481 TDS401A04366 4157824 TDS411A04366 4,366 .1719 66 24 17 0,7 36 6
4163482 TDS401A04400 4157825 TDS411A04400 4,400 .1732 66 24 17 0,7 36 6
4163483 TDS401A04500 4157826 TDS411A04500 4,500 .1772 66 24 17 0,7 36 6
4163484 TDS401A04600 4157827 TDS411A04600 4,600 .1811 66 24 17 0,8 36 6
4163485 TDS401A04623 4157828 TDS411A04623 4,623 .1820 66 24 17 0,8 36 6
4163486 TDS401A04700 4157829 TDS411A04700 4,700 .1850 66 24 17 0,8 36 6
4163487 TDS401A04763 4157830 TDS411A04763 4,763 .1875 66 28 20 0,8 36 6
4163488 TDS401A04800 4157831 TDS411A04800 4,800 .1890 66 28 20 0,8 36 6
4163489 TDS401A04852 4157832 TDS411A04852 4,852 .1910 66 28 20 0,8 36 6
4163490 TDS401A04900 4157833 TDS411A04900 4,900 .1929 66 28 20 0,8 36 6
4163491 TDS401A05000 4157834 TDS411A05000 5,000 .1969 66 28 20 0,8 36 6
4163492 TDS401A05100 4157835 TDS411A05100 5,100 .2008 66 28 20 0,8 36 6
4163493 TDS401A05106 4157836 TDS411A05106 5,106 .2010 66 28 20 0,8 36 6
4163494 TDS401A05159 4157837 TDS411A05159 5,159 .2031 66 28 20 0,9 36 6
4163495 TDS401A05200 4157838 TDS411A05200 5,200 .2047 66 28 20 0,9 36 6
4163496 TDS401A05300 4157839 TDS411A05300 5,300 .2087 66 28 20 0,9 36 6
4163497 TDS401A05400 4157840 TDS411A05400 5,400 .2126 66 28 20 0,9 36 6
4163498 TDS401A05410 4157841 TDS411A05410 5,410 .2130 66 28 20 0,9 36 6
4163499 TDS401A05500 4157842 TDS411A05500 5,500 .2165 66 28 20 0,9 36 6
4163500 TDS401A05558 4157843 TDS411A05558 5,558 .2188 66 28 20 0,9 36 6
4163501 TDS401A05600 4157844 TDS411A05600 5,600 .2205 66 28 20 0,9 36 6
4163502 TDS401A05616 4157845 TDS411A05616 5,616 .2211 66 28 20 0,9 36 6
4163503 TDS401A05700 4157846 TDS411A05700 5,700 .2244 66 28 20 1,0 36 6
4163504 TDS401A05800 4157847 TDS411A05800 5,800 .2283 66 28 20 1,0 36 6
4163505 TDS401A05900 4157848 TDS411A05900 5,900 .2323 66 28 20 1,0 36 6
4163506 TDS401A05954 4157849 TDS411A05954 5,954 .2344 66 28 20 1,0 36 6
4163507 TDS401A06000 4157850 TDS411A06000 6,000 .2362 66 28 20 1,0 36 6
4163508 TDS401A06100 4157851 TDS411A06100 6,100 .2402 79 34 24 1,0 36 8
4163509 TDS401A06200 4157852 TDS411A06200 6,200 .2441 79 34 24 1,0 36 8
4163510 TDS401A06300 4157853 TDS411A06300 6,300 .2480 79 34 24 1,1 36 8
4163511 TDS401A06350 4157854 TDS411A06350 6,350 .2500 79 34 24 1,1 36 8
4163512 TDS401A06400 4157855 TDS411A06400 6,400 .2520 79 34 24 1,1 36 8
4163513 TDS401A06500 4157856 TDS411A06500 6,500 .2559 79 34 24 1,1 36 8
4163514 TDS401A06528 4157857 TDS411A06528 6,528 .2570 79 34 24 1,1 36 8
4163515 TDS401A06600 4157858 TDS411A06600 6,600 .2598 79 34 24 1,1 36 8
4163516 TDS401A06630 4157859 TDS411A06630 6,630 .2610 79 34 24 1,1 36 8
4163517 TDS401A06700 4157860 TDS411A06700 6,700 .2638 79 34 24 1,1 36 8
4163518 TDS401A06746 4157861 TDS411A06746 6,746 .2656 79 34 24 1,1 36 8
4163519 TDS401A06800 4157862 TDS411A06800 6,800 .2677 79 34 24 1,1 36 8
WID_Master16_Holemaking_SolidCarbideDrills_T056_T057_Metric_REBRAND.indd 57 10/29/15 1:22 PM
T58
LViWID M 16 H l ki S lidC bid D ill T058 T059 M i REBRANDO b 15 20153 46PM
widia.com
(TDS401A • TDS411A • 3 x D — continued)
(continued)
Solid Carbide Drills
TOP DRILL S™ with Through Coolant • Steel and Cast Iron
rst choice
alternate choice
Solid Carbide Drills
WP20PD WK15PD
D1 diameter
grade WP20PD
TiAlN
order # catalogue #
grade WK15PD
AlCrN
order # catalogue # mm in L L3 L4 max L5 LS D
4163520 TDS401A06900 4157863 TDS411A06900 6,900 .2717 79 34 24 1,2 36 8
4163521 TDS401A07000 4157864 TDS411A07000 7,000 .2756 79 34 24 1,2 36 8
4163522 TDS401A07100 4157865 TDS411A07100 7,100 .2795 79 41 29 1,2 36 8
4163523 TDS401A07145 4157866 TDS411A07145 7,145 .2813 79 41 29 1,2 36 8
4163524 TDS401A07200 4157867 TDS411A07200 7,200 .2835 79 41 29 1,2 36 8
4163525 TDS401A07300 4157868 TDS411A07300 7,300 .2874 79 41 29 1,2 36 8
4163526 TDS401A07400 4157869 TDS411A07400 7,400 .2913 79 41 29 1,3 36 8
4163527 TDS401A07500 4157870 TDS411A07500 7,500 .2953 79 41 29 1,3 36 8
4163528 TDS401A07541 4157871 TDS411A07541 7,541 .2969 79 41 29 1,3 36 8
4163529 TDS401A07600 4157872 TDS411A07600 7,600 .2992 79 41 29 1,3 36 8
4163530 TDS401A07700 4157873 TDS411A07700 7,700 .3031 79 41 29 1,3 36 8
4163531 TDS401A07800 4157874 TDS411A07800 7,800 .3071 79 41 29 1,3 36 8
4163532 TDS401A07900 4157875 TDS411A07900 7,900 .3110 79 41 29 1,3 36 8
4163533 TDS401A07938 4157876 TDS411A07938 7,938 .3125 79 41 29 1,3 36 8
4163534 TDS401A08000 4157877 TDS411A08000 8,000 .3150 79 41 29 1,4 36 8
4163535 TDS401A08100 4157878 TDS411A08100 8,100 .3189 89 47 35 1,4 40 10
4163536 TDS401A08200 4157879 TDS411A08200 8,200 .3228 89 47 35 1,4 40 10
4163537 TDS401A08300 4157880 TDS411A08300 8,300 .3268 89 47 35 1,4 40 10
4163538 TDS401A08334 4157881 TDS411A08334 8,334 .3281 89 47 35 1,4 40 10
4163539 TDS401A08400 4157882 TDS411A08400 8,400 .3307 89 47 35 1,4 40 10
4163540 TDS401A08433 4157883 TDS411A08433 8,433 .3320 89 47 35 1,4 40 10
4163541 TDS401A08500 4157884 TDS411A08500 8,500 .3346 89 47 35 1,4 40 10
4163542 TDS401A08600 4157885 TDS411A08600 8,600 .3386 89 47 35 1,5 40 10
4163543 TDS401A08700 4157886 TDS411A08700 8,700 .3425 89 47 35 1,5 40 10
4163544 TDS401A08733 4157887 TDS411A08733 8,733 .3438 89 47 35 1,5 40 10
4163545 TDS401A08800 4157888 TDS411A08800 8,800 .3465 89 47 35 1,5 40 10
4163546 TDS401A08900 4157889 TDS411A08900 8,900 .3504 89 47 35 1,5 40 10
4163547 TDS401A09000 4157890 TDS411A09000 9,000 .3543 89 47 35 1,5 40 10
4163548 TDS401A09100 4157891 TDS411A09100 9,100 .3583 89 47 35 1,5 40 10
4163549 TDS401A09129 4157892 TDS411A09129 9,129 .3594 89 47 35 1,6 40 10
4163550 TDS401A09200 4157893 TDS411A09200 9,200 .3622 89 47 35 1,6 40 10
4163551 TDS401A09300 4157894 TDS411A09300 9,300 .3661 89 47 35 1,6 40 10
4163552 TDS401A09347 4157895 TDS411A09347 9,347 .3680 89 47 35 1,6 40 10
4163553 TDS401A09400 4157896 TDS411A09400 9,400 .3701 89 47 35 1,6 40 10
4163554 TDS401A09500 4157897 TDS411A09500 9,500 .3740 89 47 35 1,6 40 10
4163555 TDS401A09525 4157898 TDS411A09525 9,525 .3750 89 47 35 1,6 40 10
4163556 TDS401A09600 4157899 TDS411A09600 9,600 .3780 89 47 35 1,6 40 10
4163557 TDS401A09700 4157900 TDS411A09700 9,700 .3819 89 47 35 1,7 40 10
4163558 TDS401A09800 4157901 TDS411A09800 9,800 .3858 89 47 35 1,7 40 10
4163559 TDS401A09900 4157902 TDS411A09900 9,900 .3898 89 47 35 1,7 40 10
WID_Master16_Holemaking_SolidCarbideDrills_T058_T059_Metric_REBRAND.indd 58 10/29/15 1:22 PM
T59
LViWID M 16 H l ki S lidC bid D ill T058 T059 M i REBRANDO b 1520153 46PM
widia.com
(TDS401A • TDS411A • 3 x D — continued)
(continued)
Solid Carbide Drills
TOP DRILL S™ with Through Coolant • Steel and Cast Iron
rst choice
alternate choice
Solid Carbide Drills
WP20PD WK15PD
D1 diameter
grade WP20PD
TiAlN
order # catalogue #
grade WK15PD
AlCrN
order # catalogue # mm in L L3 L4 max L5 LS D
4163560 TDS401A09921 4157903 TDS411A09921 9,921 .3906 89 47 35 1,7 40 10
4162950 TDS401A10000 4156562 TDS411A10000 10,000 .3937 89 47 35 1,7 40 10
4162951 TDS401A10100 4156603 TDS411A10100 10,100 .3976 102 55 40 1,7 45 12
4162952 TDS401A10200 4156604 TDS411A10200 10,200 .4016 102 55 40 1,7 45 12
4163343 TDS401A10300 4156605 TDS411A10300 10,300 .4055 102 55 40 1,8 45 12
4163344 TDS401A10320 4156606 TDS411A10320 10,320 .4063 102 55 40 1,8 45 12
4163345 TDS401A10400 4156607 TDS411A10400 10,400 .4094 102 55 40 1,8 45 12
4163346 TDS401A10500 4156608 TDS411A10500 10,500 .4134 102 55 40 1,8 45 12
4163347 TDS401A10600 4156609 TDS411A10600 10,600 .4173 102 55 40 1,8 45 12
4163348 TDS401A10700 4156610 TDS411A10700 10,700 .4213 102 55 40 1,8 45 12
4163349 TDS401A10716 4156611 TDS411A10716 10,716 .4219 102 55 40 1,8 45 12
4163350 TDS401A10800 4156612 TDS411A10800 10,800 .4252 102 55 40 1,8 45 12
4163351 TDS401A10900 4156613 TDS411A10900 10,900 .4291 102 55 40 1,9 45 12
4163352 TDS401A11000 4156614 TDS411A11000 11,000 .4331 102 55 40 1,9 45 12
4163353 TDS401A11100 4156615 TDS411A11100 11,100 .4370 102 55 40 1,9 45 12
4163354 TDS401A11113 4156616 TDS411A11113 11,113 .4375 102 55 40 1,9 45 12
4163355 TDS401A11200 4156617 TDS411A11200 11,200 .4409 102 55 40 1,9 45 12
4163356 TDS401A11300 4156618 TDS411A11300 11,300 .4449 102 55 40 1,9 45 12
4163357 TDS401A11400 4156619 TDS411A11400 11,400 .4488 102 55 40 2,0 45 12
4163358 TDS401A11500 4156620 TDS411A11500 11,500 .4528 102 55 40 2,0 45 12
4163359 TDS401A11509 4156621 TDS411A11509 11,509 .4531 102 55 40 2,0 45 12
4163360 TDS401A11600 4156622 TDS411A11600 11,600 .4567 102 55 40 2,0 45 12
4163361 TDS401A11700 4156623 TDS411A11700 11,700 .4606 102 55 40 2,0 45 12
4163362 TDS401A11800 4156624 TDS411A11800 11,800 .4646 102 55 40 2,0 45 12
4163363 TDS401A11900 4156625 TDS411A11900 11,900 .4685 102 55 40 2,0 45 12
4163364 TDS401A11908 4156626 TDS411A11908 11,908 .4688 102 55 40 2,0 45 12
4163365 TDS401A12000 4156627 TDS411A12000 12,000 .4724 102 55 40 2,1 45 12
4163366 TDS401A12100 4156628 TDS411A12100 12,100 .4764 107 60 43 2,1 45 14
4163367 TDS401A12200 4156629 TDS411A12200 12,200 .4803 107 60 43 2,1 45 14
4163368 TDS401A12300 4156630 TDS411A12300 12,300 .4843 107 60 43 2,1 45 14
4163369 TDS401A12304 4156631 TDS411A12304 12,304 .4844 107 60 43 2,1 45 14
4163370 TDS401A12400 4156632 TDS411A12400 12,400 .4882 107 60 43 2,1 45 14
4163371 TDS401A12500 4156633 TDS411A12500 12,500 .4921 107 60 43 2,1 45 14
4163372 TDS401A12600 4156634 TDS411A12600 12,600 .4961 107 60 43 2,2 45 14
4163373 TDS401A12700 4156635 TDS411A12700 12,700 .5000 107 60 43 2,2 45 14
4163374 TDS401A12800 4156636 TDS411A12800 12,800 .5039 107 60 43 2,2 45 14
4163375 TDS401A12900 4156637 TDS411A12900 12,900 .5079 107 60 43 2,2 45 14
4163376 TDS401A13000 4156638 TDS411A13000 13,000 .5118 107 60 43 2,2 45 14
4163377 TDS401A13096 4156639 TDS411A13096 13,096 .5156 107 60 43 2,3 45 14
4163378 TDS401A13100 4156640 TDS411A13100 13,100 .5157 107 60 43 2,3 45 14
WID_Master16_Holemaking_SolidCarbideDrills_T058_T059_Metric_REBRAND.indd 59 10/29/15 1:22 PM
T60
LViWID M 16 H l ki S lidC bid D ill T060 T061 M i REBRANDO b 15 20153 47PM
widia.com
(TDS401A • TDS411A • 3 x D — continued)
(continued)
Solid Carbide Drills
TOP DRILL S™ with Through Coolant • Steel and Cast Iron
rst choice
alternate choice
Solid Carbide Drills
WP20PD WK15PD
D1 diameter
grade WP20PD
TiAlN
order # catalogue #
grade WK15PD
AlCrN
order # catalogue # mm in L L3 L4 max L5 LS D
4163379 TDS401A13200 4156641 TDS411A13200 13,200 .5197 107 60 43 2,3 45 14
4163380 TDS401A13300 4156642 TDS411A13300 13,300 .5236 107 60 43 2,3 45 14
4163381 TDS401A13400 4156643 TDS411A13400 13,400 .5276 107 60 43 2,3 45 14
4163382 TDS401A13500 4156644 TDS411A13500 13,500 .5315 107 60 43 2,3 45 14
4163383 TDS401A13600 4156645 TDS411A13600 13,600 .5354 107 60 43 2,3 45 14
4163384 TDS401A13700 4156646 TDS411A13700 13,700 .5394 107 60 43 2,4 45 14
4163385 TDS401A13800 4156647 TDS411A13800 13,800 .5433 107 60 43 2,4 45 14
4163386 TDS401A13891 4156648 TDS411A13891 13,891 .5469 107 60 43 2,4 45 14
4163387 TDS401A13900 4156649 TDS411A13900 13,900 .5472 107 60 43 2,4 45 14
4163388 TDS401A14000 4156650 TDS411A14000 14,000 .5512 107 60 43 2,4 45 14
4163389 TDS401A14100 4156651 TDS411A14100 14,100 .5551 115 65 45 2,4 48 16
4163390 TDS401A14200 4156652 TDS411A14200 14,200 .5591 115 65 45 2,5 48 16
4163391 TDS401A14288 4156653 TDS411A14288 14,288 .5625 115 65 45 2,5 48 16
4163392 TDS401A14300 4156654 TDS411A14300 14,300 .5630 115 65 45 2,5 48 16
4163393 TDS401A14400 4156655 TDS411A14400 14,400 .5669 115 65 45 2,5 48 16
4163394 TDS401A14500 4156656 TDS411A14500 14,500 .5709 115 65 45 2,5 48 16
4163395 TDS401A14600 4156657 TDS411A14600 14,600 .5748 115 65 45 2,5 48 16
4163396 TDS401A14684 4156658 TDS411A14684 14,684 .5781 115 65 45 2,5 48 16
4163397 TDS401A14700 4156659 TDS411A14700 14,700 .5787 115 65 45 2,5 48 16
4163398 TDS401A14800 4156660 TDS411A14800 14,800 .5827 115 65 45 2,6 48 16
4163399 TDS401A14900 4156661 TDS411A14900 14,900 .5866 115 65 45 2,6 48 16
4163400 TDS401A15000 4156662 TDS411A15000 15,000 .5906 115 65 45 2,6 48 16
4163401 TDS401A15083 4156663 TDS411A15083 15,083 .5938 115 65 45 2,6 48 16
4163402 TDS401A15100 4156664 TDS411A15100 15,100 .5945 115 65 45 2,6 48 16
4163403 TDS401A15200 4156665 TDS411A15200 15,200 .5984 115 65 45 2,6 48 16
4163404 TDS401A15300 4156666 TDS411A15300 15,300 .6024 115 65 45 2,6 48 16
4163405 TDS401A15400 4156667 TDS411A15400 15,400 .6063 115 65 45 2,7 48 16
4163406 TDS401A15479 4156668 TDS411A15479 15,479 .6094 115 65 45 2,7 48 16
4163407 TDS401A15500 4156669 TDS411A15500 15,500 .6102 115 65 45 2,7 48 16
4163408 TDS401A15600 4156670 TDS411A15600 15,600 .6142 115 65 45 2,7 48 16
4163409 TDS401A15700 4156671 TDS411A15700 15,700 .6181 115 65 45 2,7 48 16
4163410 TDS401A15800 4156672 TDS411A15800 15,800 .6220 115 65 45 2,7 48 16
4163411 TDS401A15875 4156673 TDS411A15875 15,875 .6250 115 65 45 2,7 48 16
4163412 TDS401A15900 4156674 TDS411A15900 15,900 .6260 115 65 45 2,8 48 16
4163413 TDS401A16000 4156675 TDS411A16000 16,000 .6299 115 65 45 2,8 48 16
4163414 TDS401A16100 4156676 TDS411A16100 16,100 .6339 123 73 51 2,8 48 18
4163415 TDS401A16200 4156677 TDS411A16200 16,200 .6378 123 73 51 2,8 48 18
4163416 TDS401A16271 4156678 TDS411A16271 16,271 .6406 123 73 51 2,8 48 18
4163417 TDS401A16300 4156679 TDS411A16300 16,300 .6417 123 73 51 2,8 48 18
4163418 TDS401A16400 4156680 TDS411A16400 16,400 .6457 123 73 51 2,8 48 18
WID_Master16_Holemaking_SolidCarbideDrills_T060_T061_Metric_REBRAND.indd 60 10/29/15 1:22 PM
T61
LViWID M 16 H l ki S lidC bid D ill T060 T061 M i REBRANDO b 1520153 47PM
widia.com
(TDS401A • TDS411A • 3 x D — continued)
Solid Carbide Drills
TOP DRILL S™ with Through Coolant • Steel and Cast Iron
rst choice
alternate choice
Solid Carbide Drills
WP20PD WK15PD
D1 diameter
grade WP20PD
TiAlN
order # catalogue #
grade WK15PD
AlCrN
order # catalogue # mm in L L3 L4 max L5 LS D
4163419 TDS401A16500 4156681 TDS411A16500 16,500 .6496 123 73 51 2,9 48 18
4163420 TDS401A16600 4156682 TDS411A16600 16,600 .6535 123 73 51 2,9 48 18
4163421 TDS401A16670 4156683 TDS411A16670 16,670 .6563 123 73 51 2,9 48 18
4163422 TDS401A16700 4156684 TDS411A16700 16,700 .6575 123 73 51 2,9 48 18
4163423 TDS401A16800 4156685 TDS411A16800 16,800 .6614 123 73 51 2,9 48 18
4163424 TDS401A16900 4156686 TDS411A16900 16,900 .6654 123 73 51 2,9 48 18
4163425 TDS401A17000 4156687 TDS411A17000 17,000 .6693 123 73 51 2,9 48 18
4163426 TDS401A17100 4156688 TDS411A17100 17,100 .6732 123 73 51 3,0 48 18
4163427 TDS401A17200 4156689 TDS411A17200 17,200 .6772 123 73 51 3,0 48 18
4163428 TDS401A17300 4156690 TDS411A17300 17,300 .6811 123 73 51 3,0 48 18
4163429 TDS401A17400 4156691 TDS411A17400 17,400 .6850 123 73 51 3,0 48 18
4163430 TDS401A17463 4156692 TDS411A17463 17,463 .6875 123 73 51 3,0 48 18
4163431 TDS401A17500 4156693 TDS411A17500 17,500 .6890 123 73 51 3,0 48 18
4163432 TDS401A17600 4156694 TDS411A17600 17,600 .6929 123 73 51 3,1 48 18
4163433 TDS401A17700 4156695 TDS411A17700 17,700 .6969 123 73 51 3,1 48 18
4163434 TDS401A17800 4156696 TDS411A17800 17,800 .7008 123 73 51 3,1 48 18
4163435 TDS401A17859 4156697 TDS411A17859 17,859 .7031 123 73 51 3,1 48 18
4163436 TDS401A17900 4156698 TDS411A17900 17,900 .7047 123 73 51 3,1 48 18
4163271 TDS401A18000 4156699 TDS411A18000 18,000 .7087 123 73 51 3,1 48 18
4163272 TDS401A18100 4156700 TDS411A18100 18,100 .7126 131 79 55 3,1 50 20
4163283 TDS401A18200 4156701 TDS411A18200 18,200 .7165 131 79 55 3,2 50 20
4163284 TDS401A18258 4156702 TDS411A18258 18,258 .7188 131 79 55 3,2 50 20
4163285 TDS401A18300 4156713 TDS411A18300 18,300 .7205 131 79 55 3,2 50 20
4163286 TDS401A18400 4156714 TDS411A18400 18,400 .7244 131 79 55 3,2 50 20
4163287 TDS401A18500 4156715 TDS411A18500 18,500 .7283 131 79 55 3,2 50 20
4163288 TDS401A18600 4156716 TDS411A18600 18,600 .7323 131 79 55 3,2 50 20
4163289 TDS401A18654 4156717 TDS411A18654 18,654 .7344 131 79 55 3,2 50 20
4163290 TDS401A18700 4156718 TDS411A18700 18,700 .7362 131 79 55 3,2 50 20
4163291 TDS401A18800 4156719 TDS411A18800 18,800 .7402 131 79 55 3,3 50 20
4163292 TDS401A18900 4156720 TDS411A18900 18,900 .7441 131 79 55 3,3 50 20
4163293 TDS401A19000 4156721 TDS411A19000 19,000 .7480 131 79 55 3,3 50 20
4163294 TDS401A19050 4156722 TDS411A19050 19,050 .7500 131 79 55 3,3 50 20
4163295 TDS401A19100 4156723 TDS411A19100 19,100 .7520 131 79 55 3,3 50 20
4163296 TDS401A19200 4156724 TDS411A19200 19,200 .7559 131 79 55 3,3 50 20
4163297 TDS401A19300 4156725 TDS411A19300 19,300 .7598 131 79 55 3,4 50 20
4163298 TDS401A19400 4156726 TDS411A19400 19,400 .7638 131 79 55 3,4 50 20
4163299 TDS401A19500 4156727 TDS411A19500 19,500 .7677 131 79 55 3,4 50 20
4163300 TDS401A19600 4156728 TDS411A19600 19,600 .7717 131 79 55 3,4 50 20
4163301 TDS401A19700 4156729 TDS411A19700 19,700 .7756 131 79 55 3,4 50 20
4163302 TDS401A19800 4156730 TDS411A19800 19,800 .7795 131 79 55 3,4 50 20
4163303 TDS401A19900 4156731 TDS411A19900 19,900 .7835 131 79 55 3,5 50 20
4163304 TDS401A20000 4156732 TDS411A20000 20,000 .7874 131 79 55 3,5 50 20
WID_Master16_Holemaking_SolidCarbideDrills_T060_T061_Metric_REBRAND.indd 61 10/29/15 1:22 PM
T62
LViWID M 16 H l ki S lidC bid D ill T062 T063 M i REBRANDO b 15 20153 48PM
widia.com
WP20PD WK15PD
Solid Carbide Drills
TOP DRILL S™ with Through Coolant • Steel and Cast Iron
TDS402A • TDS412A • 5 x D
rst choice
alternate choice
Solid Carbide Drills
(continued)
D1 diameter
grade WP20PD
TiAlN
order # catalogue #
grade WK15PD
AlCrN
order # catalogue # mm in L L3 L4 max L5 LS D
4162967 TDS402A03000 4158757 TDS412A03000 3,000 .1181 66 28 23 0,5 36 6
4162968 TDS402A03048 4158758 TDS412A03048 3,048 .1200 66 28 23 0,5 36 6
4162969 TDS402A03100 4158759 TDS412A03100 3,100 .1220 66 28 23 0,5 36 6
4162970 TDS402A03175 4158760 TDS412A03175 3,175 .1250 66 28 23 0,5 36 6
4162972 TDS402A03200 4158761 TDS412A03200 3,200 .1260 66 28 23 0,5 36 6
4162983 TDS402A03264 4158762 TDS412A03264 3,264 .1285 66 28 23 0,5 36 6
4162984 TDS402A03300 4158793 TDS412A03300 3,300 .1299 66 28 23 0,5 36 6
4162985 TDS402A03400 4158794 TDS412A03400 3,400 .1339 66 28 23 0,6 36 6
4162986 TDS402A03455 4158795 TDS412A03455 3,455 .1360 66 28 23 0,6 36 6
4162987 TDS402A03500 4158796 TDS412A03500 3,500 .1378 66 28 23 0,6 36 6
4162988 TDS402A03571 4158797 TDS412A03571 3,571 .1406 66 28 23 0,6 36 6
4162989 TDS402A03600 4158798 TDS412A03600 3,600 .1417 66 28 23 0,6 36 6
4162990 TDS402A03658 4158799 TDS412A03658 3,658 .1440 66 28 23 0,6 36 6
4162991 TDS402A03700 4158800 TDS412A03700 3,700 .1457 66 28 23 0,6 36 6
4162992 TDS402A03734 4158801 TDS412A03734 3,734 .1470 66 28 23 0,6 36 6
4162993 TDS402A03800 4158802 TDS412A03800 3,800 .1496 74 36 29 0,6 36 6
4162994 TDS402A03900 4158803 TDS412A03900 3,900 .1535 74 36 29 0,6 36 6
4162995 TDS402A03970 4158804 TDS412A03970 3,970 .1563 74 36 29 0,7 36 6
4162996 TDS402A04000 4158805 TDS412A04000 4,000 .1575 74 36 29 0,7 36 6
4162997 TDS402A04039 4158806 TDS412A04039 4,039 .1590 74 36 29 0,7 36 6
4162998 TDS402A04090 4158807 TDS412A04090 4,090 .1610 74 36 29 0,7 36 6
4162999 TDS402A04100 4158808 TDS412A04100 4,100 .1614 74 36 29 0,7 36 6
4163000 TDS402A04200 4158809 TDS412A04200 4,200 .1654 74 36 29 0,7 36 6
4163001 TDS402A04217 4158810 TDS412A04217 4,217 .1660 74 36 29 0,7 36 6
For information on L, L3, and L4 max, see page T143.
WID_Master16_Holemaking_SolidCarbideDrills_T062_T063_Metric_REBRAND.indd 62 10/29/15 1:22 PM
T63
LViWID M 16 H l ki S lidC bid D ill T062 T063 M i REBRANDO b 1520153 48PM
widia.com
WP20PD WK15PD
Solid Carbide Drills
TOP DRILL S™ with Through Coolant • Steel and Cast Iron
Solid Carbide Drills
(TDS402A • TDS412A • 5 x D — continued)
(continued)
rst choice
alternate choice
D1 diameter
grade WP20PD
TiAlN
order # catalogue #
grade WK15PD
AlCrN
order # catalogue # mm in L L3 L4 max L5 LS D
4163002 TDS402A04300 4158811 TDS412A04300 4,300 .1693 74 36 29 0,7 36 6
4163013 TDS402A04366 4158812 TDS412A04366 4,366 .1719 74 36 29 0,7 36 6
4163014 TDS402A04400 4158813 TDS412A04400 4,400 .1732 74 36 29 0,7 36 6
4163015 TDS402A04500 4158814 TDS412A04500 4,500 .1772 74 36 29 0,7 36 6
4163016 TDS402A04600 4158815 TDS412A04600 4,600 .1811 74 36 29 0,8 36 6
4163017 TDS402A04623 4158816 TDS412A04623 4,623 .1820 74 36 29 0,8 36 6
4163018 TDS402A04700 4158817 TDS412A04700 4,700 .1850 74 36 29 0,8 36 6
4163019 TDS402A04763 4158818 TDS412A04763 4,763 .1875 82 44 35 0,8 36 6
4163020 TDS402A04800 4158819 TDS412A04800 4,800 .1890 82 44 35 0,8 36 6
4163021 TDS402A04852 4158820 TDS412A04852 4,852 .1910 82 44 35 0,8 36 6
4163022 TDS402A04900 4158821 TDS412A04900 4,900 .1929 82 44 35 0,8 36 6
4163023 TDS402A05000 4158822 TDS412A05000 5,000 .1969 82 44 35 0,8 36 6
4163024 TDS402A05100 4158823 TDS412A05100 5,100 .2008 82 44 35 0,8 36 6
4163025 TDS402A05106 4158824 TDS412A05106 5,106 .2010 82 44 35 0,8 36 6
4163026 TDS402A05159 4158825 TDS412A05159 5,159 .2031 82 44 35 0,9 36 6
4163027 TDS402A05200 4158826 TDS412A05200 5,200 .2047 82 44 35 0,9 36 6
4163028 TDS402A05300 4158827 TDS412A05300 5,300 .2087 82 44 35 0,9 36 6
4163029 TDS402A05400 4158828 TDS412A05400 5,400 .2126 82 44 35 0,9 36 6
4163030 TDS402A05410 4158829 TDS412A05410 5,410 .2130 82 44 35 0,9 36 6
4163031 TDS402A05500 4158830 TDS412A05500 5,500 .2165 82 44 35 0,9 36 6
4163032 TDS402A05558 4158831 TDS412A05558 5,558 .2188 82 44 35 0,9 36 6
4163034 TDS402A05600 4158832 TDS412A05600 5,600 .2205 82 44 35 0,9 36 6
4163035 TDS402A05616 4158833 TDS412A05616 5,616 .2211 82 44 35 0,9 36 6
4163036 TDS402A05700 4158834 TDS412A05700 5,700 .2244 82 44 35 1,0 36 6
4163037 TDS402A05800 4158835 TDS412A05800 5,800 .2283 82 44 35 1,0 36 6
4163038 TDS402A05900 4158836 TDS412A05900 5,900 .2323 82 44 35 1,0 36 6
4163039 TDS402A05954 4158837 TDS412A05954 5,954 .2344 82 44 35 1,0 36 6
4163040 TDS402A06000 4158838 TDS412A06000 6,000 .2362 82 44 35 1,0 36 6
4163041 TDS402A06100 4158839 TDS412A06100 6,100 .2402 91 53 43 1,0 36 8
4163042 TDS402A06200 4158840 TDS412A06200 6,200 .2441 91 53 43 1,0 36 8
4163043 TDS402A06300 4158841 TDS412A06300 6,300 .2480 91 53 43 1,1 36 8
4163044 TDS402A06350 4158842 TDS412A06350 6,350 .2500 91 53 43 1,1 36 8
4163045 TDS402A06400 4158843 TDS412A06400 6,400 .2520 91 53 43 1,1 36 8
4163046 TDS402A06500 4158844 TDS412A06500 6,500 .2559 91 53 43 1,1 36 8
4163047 TDS402A06528 4158845 TDS412A06528 6,528 .2570 91 53 43 1,1 36 8
4163048 TDS402A06600 4158846 TDS412A06600 6,600 .2598 91 53 43 1,1 36 8
4163049 TDS402A06630 4158847 TDS412A06630 6,630 .2610 91 53 43 1,1 36 8
4163050 TDS402A06700 4158848 TDS412A06700 6,700 .2638 91 53 43 1,1 36 8
4163051 TDS402A06746 4158849 TDS412A06746 6,746 .2656 91 53 43 1,1 36 8
4163052 TDS402A06800 4158850 TDS412A06800 6,800 .2677 91 53 43 1,1 36 8
WID_Master16_Holemaking_SolidCarbideDrills_T062_T063_Metric_REBRAND.indd 63 10/29/15 1:22 PM
T64
LViWID M 16 H l ki S lidC bid D ill T064 T065 M i REBRANDO b 15 20153 49PM
widia.com
Solid Carbide Drills
TOP DRILL S™ with Through Coolant • Steel and Cast Iron
Solid Carbide Drills
(TDS402A • TDS412A • 5 x D — continued)
rst choice
alternate choice
(continued)
WP20PD WK15PD
D1 diameter
grade WP20PD
TiAlN
order # catalogue #
grade WK15PD
AlCrN
order # catalogue # mm in L L3 L4 max L5 LS D
4163053 TDS402A06900 4158851 TDS412A06900 6,900 .2717 91 53 43 1,2 36 8
4163054 TDS402A07000 4158852 TDS412A07000 7,000 .2756 91 53 43 1,2 36 8
4163055 TDS402A07100 4158853 TDS412A07100 7,100 .2795 91 53 43 1,2 36 8
4163056 TDS402A07145 4158854 TDS412A07145 7,145 .2813 91 53 43 1,2 36 8
4163057 TDS402A07200 4158855 TDS412A07200 7,200 .2835 91 53 43 1,2 36 8
4163058 TDS402A07300 4158856 TDS412A07300 7,300 .2874 91 53 43 1,2 36 8
4163059 TDS402A07400 4158857 TDS412A07400 7,400 .2913 91 53 43 1,3 36 8
4163060 TDS402A07500 4158858 TDS412A07500 7,500 .2953 91 53 43 1,3 36 8
4163061 TDS402A07541 4158859 TDS412A07541 7,541 .2969 91 53 43 1,3 36 8
4163062 TDS402A07600 4158860 TDS412A07600 7,600 .2992 91 53 43 1,3 36 8
4163063 TDS402A07700 4158861 TDS412A07700 7,700 .3031 91 53 43 1,3 36 8
4163064 TDS402A07800 4158862 TDS412A07800 7,800 .3071 91 53 43 1,3 36 8
4163065 TDS402A07900 4158863 TDS412A07900 7,900 .3110 91 53 43 1,3 36 8
4163066 TDS402A07938 4158864 TDS412A07938 7,938 .3125 91 53 43 1,3 36 8
4163067 TDS402A08000 4158865 TDS412A08000 8,000 .3150 91 53 43 1,4 36 8
4163068 TDS402A08100 4158866 TDS412A08100 8,100 .3189 103 61 49 1,4 40 10
4163069 TDS402A08200 4158867 TDS412A08200 8,200 .3228 103 61 49 1,4 40 10
4163070 TDS402A08300 4158868 TDS412A08300 8,300 .3268 103 61 49 1,4 40 10
4163071 TDS402A08334 4158869 TDS412A08334 8,334 .3281 103 61 49 1,4 40 10
4163072 TDS402A08400 4158870 TDS412A08400 8,400 .3307 103 61 49 1,4 40 10
4163073 TDS402A08433 4158871 TDS412A08433 8,433 .3320 103 61 49 1,4 40 10
4163074 TDS402A08500 4158872 TDS412A08500 8,500 .3346 103 61 49 1,4 40 10
4163075 TDS402A08600 4158873 TDS412A08600 8,600 .3386 103 61 49 1,5 40 10
4163077 TDS402A08700 4158874 TDS412A08700 8,700 .3425 103 61 49 1,5 40 10
4163078 TDS402A08733 4158875 TDS412A08733 8,733 .3438 103 61 49 1,5 40 10
4163079 TDS402A08800 4158876 TDS412A08800 8,800 .3465 103 61 49 1,5 40 10
4163080 TDS402A08900 4158877 TDS412A08900 8,900 .3504 103 61 49 1,5 40 10
4163081 TDS402A09000 4158878 TDS412A09000 9,000 .3543 103 61 49 1,5 40 10
4163082 TDS402A09100 4158879 TDS412A09100 9,100 .3583 103 61 49 1,5 40 10
4163083 TDS402A09129 4158880 TDS412A09129 9,129 .3594 103 61 49 1,6 40 10
4163084 TDS402A09200 4158881 TDS412A09200 9,200 .3622 103 61 49 1,6 40 10
4163085 TDS402A09300 4158882 TDS412A09300 9,300 .3661 103 61 49 1,6 40 10
4163086 TDS402A09347 4158883 TDS412A09347 9,347 .3680 103 61 49 1,6 40 10
4163087 TDS402A09400 4158884 TDS412A09400 9,400 .3701 103 61 49 1,6 40 10
4163088 TDS402A09500 4158885 TDS412A09500 9,500 .3740 103 61 49 1,6 40 10
4163089 TDS402A09525 4158886 TDS412A09525 9,525 .3750 103 61 49 1,6 40 10
4163090 TDS402A09600 4158887 TDS412A09600 9,600 .3780 103 61 49 1,6 40 10
4163091 TDS402A09700 4158888 TDS412A09700 9,700 .3819 103 61 49 1,7 40 10
4163092 TDS402A09800 4158889 TDS412A09800 9,800 .3858 103 61 49 1,7 40 10
4163093 TDS402A09900 4158890 TDS412A09900 9,900 .3898 103 61 49 1,7 40 10
WID_Master16_Holemaking_SolidCarbideDrills_T064_T065_Metric_REBRAND.indd 64 10/29/15 1:22 PM
T65
LViWID M 16 H l ki S lidC bid D ill T064 T065 M i REBRANDO b 1520153 49PM
widia.com
Solid Carbide Drills
TOP DRILL S™ with Through Coolant • Steel and Cast Iron
Solid Carbide Drills
(TDS402A • TDS412A • 5 x D — continued)
(continued)
rst choice
alternate choice
WP20PD WK15PD
D1 diameter
grade WP20PD
TiAlN
order # catalogue #
grade WK15PD
AlCrN
order # catalogue # mm in L L3 L4 max L5 LS D
4163094 TDS402A09921 4158891 TDS412A09921 9,921 .3906 103 61 49 1,7 40 10
4162803 TDS402A10000 4156602 TDS412A10000 10,000 .3937 103 61 49 1,7 40 10
4162804 TDS402A10100 4156733 TDS412A10100 10,100 .3976 118 71 56 1,7 45 12
4162805 TDS402A10200 4156734 TDS412A10200 10,200 .4016 118 71 56 1,7 45 12
4162806 TDS402A10300 4156735 TDS412A10300 10,300 .4055 118 71 56 1,8 45 12
4162807 TDS402A10320 4156736 TDS412A10320 10,320 .4063 118 71 56 1,8 45 12
4162808 TDS402A10400 4156737 TDS412A10400 10,400 .4094 118 71 56 1,8 45 12
4162809 TDS402A10500 4156738 TDS412A10500 10,500 .4134 118 71 56 1,8 45 12
4162810 TDS402A10600 4156739 TDS412A10600 10,600 .4173 118 71 56 1,8 45 12
4162811 TDS402A10700 4156740 TDS412A10700 10,700 .4213 118 71 56 1,8 45 12
4162812 TDS402A10716 4156741 TDS412A10716 10,716 .4219 118 71 56 1,8 45 12
4162813 TDS402A10800 4156742 TDS412A10800 10,800 .4252 118 71 56 1,8 45 12
4162814 TDS402A10900 4156743 TDS412A10900 10,900 .4291 118 71 56 1,9 45 12
4162815 TDS402A11000 4156744 TDS412A11000 11,000 .4331 118 71 56 1,9 45 12
4162816 TDS402A11100 4156745 TDS412A11100 11,100 .4370 118 71 56 1,9 45 12
4162817 TDS402A11113 4156746 TDS412A11113 11,113 .4375 118 71 56 1,9 45 12
4162818 TDS402A11200 4156747 TDS412A11200 11,200 .4409 118 71 56 1,9 45 12
4162819 TDS402A11300 4156748 TDS412A11300 11,300 .4449 118 71 56 1,9 45 12
4162820 TDS402A11400 4156749 TDS412A11400 11,400 .4488 118 71 56 2,0 45 12
4162821 TDS402A11500 4156750 TDS412A11500 11,500 .4528 118 71 56 2,0 45 12
4162822 TDS402A11509 4156751 TDS412A11509 11,509 .4531 118 71 56 2,0 45 12
4162823 TDS402A11600 4156752 TDS412A11600 11,600 .4567 118 71 56 2,0 45 12
4162824 TDS402A11700 4156753 TDS412A11700 11,700 .4606 118 71 56 2,0 45 12
4162825 TDS402A11800 4156754 TDS412A11800 11,800 .4646 118 71 56 2,0 45 12
4162826 TDS402A11900 4156755 TDS412A11900 11,900 .4685 118 71 56 2,0 45 12
4162827 TDS402A11908 4156756 TDS412A11908 11,908 .4688 118 71 56 2,0 45 12
4162828 TDS402A12000 4156757 TDS412A12000 12,000 .4724 118 71 56 2,1 45 12
4162829 TDS402A12100 4156758 TDS412A12100 12,100 .4764 124 77 60 2,1 45 14
4162830 TDS402A12200 4156759 TDS412A12200 12,200 .4803 124 77 60 2,1 45 14
4162831 TDS402A12300 4156760 TDS412A12300 12,300 .4843 124 77 60 2,1 45 14
4162832 TDS402A12304 4156761 TDS412A12304 12,304 .4844 124 77 60 2,1 45 14
4162833 TDS402A12400 4156762 TDS412A12400 12,400 .4882 124 77 60 2,1 45 14
4162834 TDS402A12500 4156763 TDS412A12500 12,500 .4921 124 77 60 2,1 45 14
4162835 TDS402A12600 4156764 TDS412A12600 12,600 .4961 124 77 60 2,2 45 14
4162836 TDS402A12700 4156765 TDS412A12700 12,700 .5000 124 77 60 2,2 45 14
4162837 TDS402A12800 4156766 TDS412A12800 12,800 .5039 124 77 60 2,2 45 14
4162838 TDS402A12900 4156767 TDS412A12900 12,900 .5079 124 77 60 2,2 45 14
4162839 TDS402A13000 4156768 TDS412A13000 13,000 .5118 124 77 60 2,2 45 14
4162840 TDS402A13096 4156769 TDS412A13096 13,096 .5156 124 77 60 2,3 45 14
4162841 TDS402A13100 4156770 TDS412A13100 13,100 .5157 124 77 60 2,3 45 14
WID_Master16_Holemaking_SolidCarbideDrills_T064_T065_Metric_REBRAND.indd 65 10/29/15 1:22 PM
T66
LViWID M 16 H l ki S lidC bid D ill T066 T067 M i REBRANDO b 15 20153 49PM
widia.com
Solid Carbide Drills
TOP DRILL S™ with Through Coolant • Steel and Cast Iron
Solid Carbide Drills
(TDS402A • TDS412A • 5 x D — continued)
rst choice
alternate choice
(continued)
WP20PD WK15PD
D1 diameter
grade WP20PD
TiAlN
order # catalogue #
grade WK15PD
AlCrN
order # catalogue # mm in L L3 L4 max L5 LS D
4162842 TDS402A13200 4156771 TDS412A13200 13,200 .5197 124 77 60 2,3 45 14
4162843 TDS402A13300 4156772 TDS412A13300 13,300 .5236 124 77 60 2,3 45 14
4162844 TDS402A13400 4156773 TDS412A13400 13,400 .5276 124 77 60 2,3 45 14
4162845 TDS402A13500 4156774 TDS412A13500 13,500 .5315 124 77 60 2,3 45 14
4162846 TDS402A13600 4156775 TDS412A13600 13,600 .5354 124 77 60 2,3 45 14
4162847 TDS402A13700 4156776 TDS412A13700 13,700 .5394 124 77 60 2,4 45 14
4162848 TDS402A13800 4156777 TDS412A13800 13,800 .5433 124 77 60 2,4 45 14
4162849 TDS402A13891 4156778 TDS412A13891 13,891 .5469 124 77 60 2,4 45 14
4162850 TDS402A13900 4156779 TDS412A13900 13,900 .5472 124 77 60 2,4 45 14
4162851 TDS402A14000 4156780 TDS412A14000 14,000 .5512 124 77 60 2,4 45 14
4162852 TDS402A14100 4156781 TDS412A14100 14,100 .5551 133 83 63 2,4 48 16
4162853 TDS402A14200 4156782 TDS412A14200 14,200 .5591 133 83 63 2,5 48 16
4162854 TDS402A14288 4156783 TDS412A14288 14,288 .5625 133 83 63 2,5 48 16
4162855 TDS402A14300 4156784 TDS412A14300 14,300 .5630 133 83 63 2,5 48 16
4162856 TDS402A14400 4156785 TDS412A14400 14,400 .5669 133 83 63 2,5 48 16
4162857 TDS402A14500 4156786 TDS412A14500 14,500 .5709 133 83 63 2,5 48 16
4162858 TDS402A14600 4156787 TDS412A14600 14,600 .5748 133 83 63 2,5 48 16
4162859 TDS402A14684 4156788 TDS412A14684 14,684 .5781 133 83 63 2,5 48 16
4162860 TDS402A14700 4156789 TDS412A14700 14,700 .5787 133 83 63 2,5 48 16
4162861 TDS402A14800 4156790 TDS412A14800 14,800 .5827 133 83 63 2,6 48 16
4162862 TDS402A14900 4156791 TDS412A14900 14,900 .5866 133 83 63 2,6 48 16
4162863 TDS402A15000 4156792 TDS412A15000 15,000 .5906 133 83 63 2,6 48 16
4162864 TDS402A15083 4156793 TDS412A15083 15,083 .5938 133 83 63 2,6 48 16
4162865 TDS402A15100 4156794 TDS412A15100 15,100 .5945 133 83 63 2,6 48 16
4162866 TDS402A15200 4156795 TDS412A15200 15,200 .5984 133 83 63 2,6 48 16
4162867 TDS402A15300 4156796 TDS412A15300 15,300 .6024 133 83 63 2,6 48 16
4162868 TDS402A15400 4156797 TDS412A15400 15,400 .6063 133 83 63 2,7 48 16
4162869 TDS402A15479 4156798 TDS412A15479 15,479 .6094 133 83 63 2,7 48 16
4162870 TDS402A15500 4156799 TDS412A15500 15,500 .6102 133 83 63 2,7 48 16
4162871 TDS402A15600 4156800 TDS412A15600 15,600 .6142 133 83 63 2,7 48 16
4162872 TDS402A15700 4156801 TDS412A15700 15,700 .6181 133 83 63 2,7 48 16
4162873 TDS402A15800 4156802 TDS412A15800 15,800 .6220 133 83 63 2,7 48 16
4162874 TDS402A15875 4156803 TDS412A15875 15,875 .6250 133 83 63 2,7 48 16
4162875 TDS402A15900 4156804 TDS412A15900 15,900 .6260 133 83 63 2,8 48 16
4162876 TDS402A16000 4156805 TDS412A16000 16,000 .6299 133 83 63 2,8 48 16
4162877 TDS402A16100 4156806 TDS412A16100 16,100 .6339 143 93 71 2,8 48 18
4162878 TDS402A16200 4156807 TDS412A16200 16,200 .6378 143 93 71 2,8 48 18
4162879 TDS402A16271 4156808 TDS412A16271 16,271 .6406 143 93 71 2,8 48 18
4162880 TDS402A16300 4156809 TDS412A16300 16,300 .6417 143 93 71 2,8 48 18
4162881 TDS402A16400 4156810 TDS412A16400 16,400 .6457 143 93 71 2,8 48 18
WID_Master16_Holemaking_SolidCarbideDrills_T066_T067_Metric_REBRAND.indd 66 10/29/15 1:22 PM
T67
LViWID M 16 H l ki S lidC bid D ill T066 T067 M i REBRANDO b 1520153 49PM
widia.com
Solid Carbide Drills
TOP DRILL S™ with Through Coolant • Steel and Cast Iron
Solid Carbide Drills
(TDS402A • TDS412A • 5 x D — continued)
rst choice
alternate choice
WP20PD WK15PD
D1 diameter
grade WP20PD
TiAlN
order # catalogue #
grade WK15PD
AlCrN
order # catalogue # mm in L L3 L4 max L5 LS D
4162882 TDS402A16500 4156811 TDS412A16500 16,500 .6496 143 93 71 2,9 48 18
4162883 TDS402A16600 4156812 TDS412A16600 16,600 .6535 143 93 71 2,9 48 18
4162884 TDS402A16670 4156813 TDS412A16670 16,670 .6563 143 93 71 2,9 48 18
4162885 TDS402A16700 4156814 TDS412A16700 16,700 .6575 143 93 71 2,9 48 18
4162886 TDS402A16800 4156815 TDS412A16800 16,800 .6614 143 93 71 2,9 48 18
4162887 TDS402A16900 4156816 TDS412A16900 16,900 .6654 143 93 71 2,9 48 18
4162888 TDS402A17000 4156817 TDS412A17000 17,000 .6693 143 93 71 2,9 48 18
4162889 TDS402A17100 4156818 TDS412A17100 17,100 .6732 143 93 71 3,0 48 18
4162890 TDS402A17200 4156819 TDS412A17200 17,200 .6772 143 93 71 3,0 48 18
4162891 TDS402A17300 4156820 TDS412A17300 17,300 .6811 143 93 71 3,0 48 18
4162892 TDS402A17400 4156821 TDS412A17400 17,400 .6850 143 93 71 3,0 48 18
4162893 TDS402A17463 4156822 TDS412A17463 17,463 .6875 143 93 71 3,0 48 18
4162894 TDS402A17500 4156823 TDS412A17500 17,500 .6890 143 93 71 3,0 48 18
4162895 TDS402A17600 4156824 TDS412A17600 17,600 .6929 143 93 71 3,1 48 18
4162896 TDS402A17700 4156825 TDS412A17700 17,700 .6969 143 93 71 3,1 48 18
4162897 TDS402A17800 4156826 TDS412A17800 17,800 .7008 143 93 71 3,1 48 18
4162898 TDS402A17859 4156827 TDS412A17859 17,859 .7031 143 93 71 3,1 48 18
4162899 TDS402A17900 4156828 TDS412A17900 17,900 .7047 143 93 71 3,1 48 18
4162274 TDS402A18000 4156853 TDS412A18000 18,000 .7087 143 93 71 3,1 48 18
4162275 TDS402A18100 4156854 TDS412A18100 18,100 .7126 153 101 77 3,1 50 20
4162276 TDS402A18200 4156855 TDS412A18200 18,200 .7165 153 101 77 3,2 50 20
4162277 TDS402A18258 4156856 TDS412A18258 18,258 .7188 153 101 77 3,2 50 20
4162278 TDS402A18300 4156857 TDS412A18300 18,300 .7205 153 101 77 3,2 50 20
4162279 TDS402A18400 4156858 TDS412A18400 18,400 .7244 153 101 77 3,2 50 20
4162280 TDS402A18500 4156859 TDS412A18500 18,500 .7283 153 101 77 3,2 50 20
4162281 TDS402A18600 4156860 TDS412A18600 18,600 .7323 153 101 77 3,2 50 20
4162282 TDS402A18654 4156861 TDS412A18654 18,654 .7344 153 101 77 3,2 50 20
4162393 TDS402A18700 4156862 TDS412A18700 18,700 .7362 153 101 77 3,2 50 20
4162394 TDS402A18800 4156863 TDS412A18800 18,800 .7402 153 101 77 3,3 50 20
4162395 TDS402A18900 4156864 TDS412A18900 18,900 .7441 153 101 77 3,3 50 20
4162396 TDS402A19000 4156865 TDS412A19000 19,000 .7480 153 101 77 3,3 50 20
4162397 TDS402A19050 4156866 TDS412A19050 19,050 .7500 153 101 77 3,3 50 20
4162398 TDS402A19100 4156867 TDS412A19100 19,100 .7520 153 101 77 3,3 50 20
4162399 TDS402A19200 4156868 TDS412A19200 19,200 .7559 153 101 77 3,3 50 20
4162400 TDS402A19300 4156869 TDS412A19300 19,300 .7598 153 101 77 3,4 50 20
4162401 TDS402A19400 4156870 TDS412A19400 19,400 .7638 153 101 77 3,4 50 20
4162402 TDS402A19500 4156871 TDS412A19500 19,500 .7677 153 101 77 3,4 50 20
4162403 TDS402A19600 4156872 TDS412A19600 19,600 .7717 153 101 77 3,4 50 20
4162404 TDS402A19700 4156873 TDS412A19700 19,700 .7756 153 101 77 3,4 50 20
4162405 TDS402A19800 4156874 TDS412A19800 19,800 .7795 153 101 77 3,4 50 20
4162406 TDS402A19900 4156875 TDS412A19900 19,900 .7835 153 101 77 3,5 50 20
4162407 TDS402A20000 4156876 TDS412A20000 20,000 .7874 153 101 77 3,5 50 20
WID_Master16_Holemaking_SolidCarbideDrills_T066_T067_Metric_REBRAND.indd 67 10/29/15 1:22 PM
T68
LViWID M 16 H l ki S lidC bid D ill T068 T069 M i REBRANDO b 15 20153 51PM
widia.com
WP20PD WK15PD
Solid Carbide Drills
TOP DRILL S™ with Through Coolant • Steel and Cast Iron
TDS403A • TDS413A • 8 x D
rst choice
alternate choice
Solid Carbide Drills
For information on L, L3, and L4 max, see page T143.
(continued)
D1 diameter
grade WP20PD
TiAlN
order # catalogue #
grade WK15PD
AlCrN
order # catalogue # mm in L L3 L4 max L5 LS D
4162796 TDS403A03000 4156972 TDS413A03000 3,000 .1181 78 40 33 0,5 36 6
4162797 TDS403A03048 4156993 TDS413A03048 3,048 .1200 78 40 33 0,5 36 6
4162798 TDS403A03100 4156994 TDS413A03100 3,100 .1220 78 40 33 0,5 36 6
4162799 TDS403A03175 4156995 TDS413A03175 3,175 .1250 78 40 33 0,5 36 6
4162800 TDS403A03200 4156996 TDS413A03200 3,200 .1260 78 40 33 0,5 36 6
4162801 TDS403A03264 4156997 TDS413A03264 3,264 .1285 78 40 33 0,5 36 6
4162802 TDS403A03300 4156998 TDS413A03300 3,300 .1299 78 40 33 0,5 36 6
4163163 TDS403A03400 4156999 TDS413A03400 3,400 .1339 78 40 33 0,6 36 6
4163164 TDS403A03455 4157000 TDS413A03455 3,455 .1360 78 40 33 0,6 36 6
4163165 TDS403A03500 4157001 TDS413A03500 3,500 .1378 78 40 33 0,6 36 6
4163166 TDS403A03571 4157002 TDS413A03571 3,571 .1406 78 40 33 0,6 36 6
4163167 TDS403A03600 4157003 TDS413A03600 3,600 .1417 78 40 33 0,6 36 6
4163168 TDS403A03658 4157004 TDS413A03658 3,658 .1440 78 40 33 0,6 36 6
4163169 TDS403A03700 4157005 TDS413A03700 3,700 .1457 78 40 33 0,6 36 6
4163170 TDS403A03734 4157006 TDS413A03734 3,734 .1470 78 40 33 0,6 36 6
4163171 TDS403A03800 4157007 TDS413A03800 3,800 .1496 87 49 41 0,6 36 6
4163172 TDS403A03900 4157008 TDS413A03900 3,900 .1535 87 49 41 0,6 36 6
4163173 TDS403A03970 4157009 TDS413A03970 3,970 .1563 87 49 41 0,7 36 6
4163174 TDS403A04000 4157010 TDS413A04000 4,000 .1575 87 49 41 0,7 36 6
4163175 TDS403A04039 4157011 TDS413A04039 4,039 .1590 87 49 41 0,7 36 6
4163176 TDS403A04090 4157012 TDS413A04090 4,090 .1610 87 49 41 0,7 36 6
4163177 TDS403A04100 4157013 TDS413A04100 4,100 .1614 87 49 41 0,7 36 6
4163178 TDS403A04200 4157014 TDS413A04200 4,200 .1654 87 49 41 0,7 36 6
4163179 TDS403A04217 4157015 TDS413A04217 4,217 .1660 87 49 41 0,7 36 6
4163180 TDS403A04300 4157016 TDS413A04300 4,300 .1693 87 49 41 0,7 36 6
4163181 TDS403A04366 4157017 TDS413A04366 4,366 .1719 87 49 41 0,7 36 6
4163182 TDS403A04400 4157018 TDS413A04400 4,400 .1732 87 49 41 0,7 36 6
4163193 TDS403A04500 4157019 TDS413A04500 4,500 .1772 87 49 41 0,7 36 6
WID_Master16_Holemaking_SolidCarbideDrills_T068_T069_Metric_REBRAND.indd 68 10/29/15 1:22 PM
T69
LViWID M 16 H l ki S lidC bid D ill T068 T069 M i REBRANDO b 1520153 51PM
widia.com
WP20PD WK15PD
Solid Carbide Drills
TOP DRILL S™ with Through Coolant • Steel and Cast Iron
Solid Carbide Drills
rst choice
alternate choice
(TDS403A • TDS413A • 8 x D — continued)
(continued)
D1 diameter
grade WP20PD
TiAlN
order # catalogue #
grade WK15PD
AlCrN
order # catalogue # mm in L L3 L4 max L5 LS D
4163194 TDS403A04600 4157020 TDS413A04600 4,600 .1811 87 49 41 0,8 36 6
4163195 TDS403A04623 4157021 TDS413A04623 4,623 .1820 87 49 41 0,8 36 6
4163196 TDS403A04700 4157022 TDS413A04700 4,700 .1850 87 49 41 0,8 36 6
4163197 TDS403A04763 4157023 TDS413A04763 4,763 .1875 94 56 48 0,8 36 6
4163198 TDS403A04800 4157024 TDS413A04800 4,800 .1890 94 56 48 0,8 36 6
4163199 TDS403A04852 4157025 TDS413A04852 4,852 .1910 94 56 48 0,8 36 6
4163200 TDS403A04900 4157026 TDS413A04900 4,900 .1929 94 56 48 0,8 36 6
4163201 TDS403A05000 4157027 TDS413A05000 5,000 .1969 94 56 48 0,8 36 6
4163202 TDS403A05100 4157028 TDS413A05100 5,100 .2008 94 56 48 0,8 36 6
4163203 TDS403A05106 4157029 TDS413A05106 5,106 .2010 94 56 48 0,8 36 6
4163204 TDS403A05159 4157030 TDS413A05159 5,159 .2031 94 56 48 0,9 36 6
4163205 TDS403A05200 4157031 TDS413A05200 5,200 .2047 94 56 48 0,9 36 6
4163206 TDS403A05300 4157032 TDS413A05300 5,300 .2087 94 56 48 0,9 36 6
4163207 TDS403A05400 4157033 TDS413A05400 5,400 .2126 94 56 48 0,9 36 6
4163208 TDS403A05410 4157034 TDS413A05410 5,410 .2130 94 56 48 0,9 36 6
4163209 TDS403A05500 4157035 TDS413A05500 5,500 .2165 94 56 48 0,9 36 6
4163210 TDS403A05558 4157036 TDS413A05558 5,558 .2188 94 56 48 0,9 36 6
4163211 TDS403A05600 4157037 TDS413A05600 5,600 .2205 94 56 48 0,9 36 6
4163212 TDS403A05616 4157038 TDS413A05616 5,616 .2211 94 56 48 0,9 36 6
4163213 TDS403A05700 4157039 TDS413A05700 5,700 .2244 94 56 48 1,0 36 6
4163214 TDS403A05800 4157040 TDS413A05800 5,800 .2283 94 56 48 1,0 36 6
4163215 TDS403A05900 4157041 TDS413A05900 5,900 .2323 94 56 48 1,0 36 6
4163216 TDS403A05954 4157042 TDS413A05954 5,954 .2344 94 56 48 1,0 36 6
4163217 TDS403A06000 4157043 TDS413A06000 6,000 .2362 94 56 48 1,0 36 6
4163218 TDS403A06100 4157044 TDS413A06100 6,100 .2402 105 67 57 1,0 36 8
4163219 TDS403A06200 4157045 TDS413A06200 6,200 .2441 105 67 57 1,0 36 8
4163220 TDS403A06300 4157046 TDS413A06300 6,300 .2480 105 67 57 1,1 36 8
4163221 TDS403A06350 4157047 TDS413A06350 6,350 .2500 105 67 57 1,1 36 8
4163222 TDS403A06400 4157048 TDS413A06400 6,400 .2520 105 67 57 1,1 36 8
4163223 TDS403A06500 4157049 TDS413A06500 6,500 .2559 105 67 57 1,1 36 8
4163224 TDS403A06528 4157050 TDS413A06528 6,528 .2570 105 67 57 1,1 36 8
4163225 TDS403A06600 4157051 TDS413A06600 6,600 .2598 105 67 57 1,1 36 8
4163226 TDS403A06630 4157052 TDS413A06630 6,630 .2610 105 67 57 1,1 36 8
4163227 TDS403A06700 4157053 TDS413A06700 6,700 .2638 105 67 57 1,1 36 8
4163228 TDS403A06746 4157054 TDS413A06746 6,746 .2656 105 67 57 1,1 36 8
4163229 TDS403A06800 4157055 TDS413A06800 6,800 .2677 105 67 57 1,1 36 8
4163230 TDS403A06900 4157056 TDS413A06900 6,900 .2717 105 67 57 1,2 36 8
4163231 TDS403A07000 4157057 TDS413A07000 7,000 .2756 105 67 57 1,2 36 8
4163232 TDS403A07100 4157058 TDS413A07100 7,100 .2795 110 72 61 1,2 36 8
4163233 TDS403A07145 4157059 TDS413A07145 7,145 .2813 110 72 61 1,2 36 8
WID_Master16_Holemaking_SolidCarbideDrills_T068_T069_Metric_REBRAND.indd 69 10/29/15 1:22 PM
T70
LViWID M 16 H l ki S lidC bid D ill T070 T071 M i REBRANDO b 15 20153 51PM
widia.com
WP20PD WK15PD
Solid Carbide Drills
TOP DRILL S™ with Through Coolant • Steel and Cast Iron
Solid Carbide Drills
(TDS403A • TDS413A • 8 x D — continued)
(continued)
rst choice
alternate choice
D1 diameter
grade WP20PD
TiAlN
order # catalogue #
grade WK15PD
AlCrN
order # catalogue # mm in L L3 L4 max L5 LS D
4163234 TDS403A07200 4157060 TDS413A07200 7,200 .2835 110 72 61 1,2 36 8
4163235 TDS403A07300 4157061 TDS413A07300 7,300 .2874 110 72 61 1,2 36 8
4163236 TDS403A07400 4157062 TDS413A07400 7,400 .2913 110 72 61 1,3 36 8
4163237 TDS403A07500 4157063 TDS413A07500 7,500 .2953 110 72 61 1,3 36 8
4163238 TDS403A07541 4157064 TDS413A07541 7,541 .2969 110 72 61 1,3 36 8
4163239 TDS403A07600 4157065 TDS413A07600 7,600 .2992 110 72 61 1,3 36 8
4163240 TDS403A07700 4157066 TDS413A07700 7,700 .3031 110 72 61 1,3 36 8
4163241 TDS403A07800 4157067 TDS413A07800 7,800 .3071 110 72 61 1,3 36 8
4163242 TDS403A07900 4157068 TDS413A07900 7,900 .3110 110 72 61 1,3 36 8
4163243 TDS403A07938 4157069 TDS413A07938 7,938 .3125 110 72 61 1,3 36 8
4163244 TDS403A08000 4157070 TDS413A08000 8,000 .3150 110 72 61 1,4 36 8
4163245 TDS403A08100 4157071 TDS413A08100 8,100 .3189 122 80 68 1,4 40 10
4163246 TDS403A08200 4157072 TDS413A08200 8,200 .3228 122 80 68 1,4 40 10
4163247 TDS403A08300 4157073 TDS413A08300 8,300 .3268 122 80 68 1,4 40 10
4163248 TDS403A08334 4157074 TDS413A08334 8,334 .3281 122 80 68 1,4 40 10
4163249 TDS403A08400 4157075 TDS413A08400 8,400 .3307 122 80 68 1,4 40 10
4163250 TDS403A08433 4157076 TDS413A08433 8,433 .3320 122 80 68 1,4 40 10
4163251 TDS403A08500 4157077 TDS413A08500 8,500 .3346 122 80 68 1,4 40 10
4163252 TDS403A08600 4157078 TDS413A08600 8,600 .3386 122 80 68 1,5 40 10
4163253 TDS403A08700 4157079 TDS413A08700 8,700 .3425 122 80 68 1,5 40 10
4163254 TDS403A08733 4157080 TDS413A08733 8,733 .3438 122 80 68 1,5 40 10
4163255 TDS403A08800 4157081 TDS413A08800 8,800 .3465 122 80 68 1,5 40 10
4163256 TDS403A08900 4157082 TDS413A08900 8,900 .3504 122 80 68 1,5 40 10
4163257 TDS403A09000 4157083 TDS413A09000 9,000 .3543 122 80 68 1,5 40 10
4163258 TDS403A09100 4157084 TDS413A09100 9,100 .3583 122 80 68 1,5 40 10
4163259 TDS403A09129 4157085 TDS413A09129 9,129 .3594 122 80 68 1,6 40 10
4163260 TDS403A09200 4157086 TDS413A09200 9,200 .3622 122 80 68 1,6 40 10
4163261 TDS403A09300 4157087 TDS413A09300 9,300 .3661 122 80 68 1,6 40 10
4163262 TDS403A09347 4157088 TDS413A09347 9,347 .3680 122 80 68 1,6 40 10
4163263 TDS403A09400 4157089 TDS413A09400 9,400 .3701 122 80 68 1,6 40 10
4163264 TDS403A09500 4157090 TDS413A09500 9,500 .3740 122 80 68 1,6 40 10
4163265 TDS403A09525 4157091 TDS413A09525 9,525 .3750 122 80 68 1,6 40 10
4163266 TDS403A09600 4157092 TDS413A09600 9,600 .3780 122 80 68 1,6 40 10
4163267 TDS403A09700 4157093 TDS413A09700 9,700 .3819 122 80 68 1,7 40 10
4163268 TDS403A09800 4157094 TDS413A09800 9,800 .3858 122 80 68 1,7 40 10
4163269 TDS403A09900 4157095 TDS413A09900 9,900 .3898 122 80 68 1,7 40 10
4163270 TDS403A09921 4157096 TDS413A09921 9,921 .3906 122 80 68 1,7 40 10
4162679 TDS403A10000 4156836 TDS413A10000 10,000 .3937 122 80 68 1,7 40 10
4162680 TDS403A10100 4156837 TDS413A10100 10,100 .3976 141 94 79 1,7 45 12
4162382 TDS403A10200 4156838 TDS413A10200 10,200 .4016 141 94 79 1,7 45 12
WID_Master16_Holemaking_SolidCarbideDrills_T070_T071_Metric_REBRAND.indd 70 10/29/15 1:22 PM
T71
LViWID M 16 H l ki S lidC bid D ill T070 T071 M i REBRANDO b 1520153 51PM
widia.com
WP20PD WK15PD
Solid Carbide Drills
TOP DRILL S™ with Through Coolant • Steel and Cast Iron
Solid Carbide Drills
rst choice
alternate choice
(TDS403A • TDS413A • 8 x D — continued)
(continued)
D1 diameter
grade WP20PD
TiAlN
order # catalogue #
grade WK15PD
AlCrN
order # catalogue # mm in L L3 L4 max L5 LS D
4162703 TDS403A10300 4156839 TDS413A10300 10,300 .4055 141 94 79 1,8 45 12
4162704 TDS403A10320 4156840 TDS413A10320 10,320 .4063 141 94 79 1,8 45 12
4162705 TDS403A10400 4156841 TDS413A10400 10,400 .4094 141 94 79 1,8 45 12
4162706 TDS403A10500 4156842 TDS413A10500 10,500 .4134 141 94 79 1,8 45 12
4162707 TDS403A10600 4156883 TDS413A10600 10,600 .4173 141 94 79 1,8 45 12
4162708 TDS403A10700 4156884 TDS413A10700 10,700 .4213 141 94 79 1,8 45 12
4162709 TDS403A10716 4156885 TDS413A10716 10,716 .4219 141 94 79 1,8 45 12
4162710 TDS403A10800 4156886 TDS413A10800 10,800 .4252 141 94 79 1,8 45 12
4162711 TDS403A10900 4156887 TDS413A10900 10,900 .4291 141 94 79 1,9 45 12
4162712 TDS403A11000 4156888 TDS413A11000 11,000 .4331 141 94 79 1,9 45 12
4162713 TDS403A11100 4156889 TDS413A11100 11,100 .4370 141 94 79 1,9 45 12
4162714 TDS403A11113 4156890 TDS413A11113 11,113 .4375 141 94 79 1,9 45 12
4162715 TDS403A11200 4156891 TDS413A11200 11,200 .4409 141 94 79 1,9 45 12
4162716 TDS403A11300 4156892 TDS413A11300 11,300 .4449 141 94 79 1,9 45 12
4162717 TDS403A11400 4156893 TDS413A11400 11,400 .4488 141 94 79 2,0 45 12
4162718 TDS403A11500 4156894 TDS413A11500 11,500 .4528 141 94 79 2,0 45 12
4162719 TDS403A11509 4156895 TDS413A11509 11,509 .4531 141 94 79 2,0 45 12
4162720 TDS403A11600 4156896 TDS413A11600 11,600 .4567 141 94 79 2,0 45 12
4162721 TDS403A11700 4156897 TDS413A11700 11,700 .4606 141 94 79 2,0 45 12
4162722 TDS403A11800 4156898 TDS413A11800 11,800 .4646 141 94 79 2,0 45 12
4162723 TDS403A11900 4156899 TDS413A11900 11,900 .4685 141 94 79 2,0 45 12
4162724 TDS403A11908 4156900 TDS413A11908 11,908 .4688 141 94 79 2,0 45 12
4162725 TDS403A12000 4156901 TDS413A12000 12,000 .4724 141 94 79 2,1 45 12
4162726 TDS403A12100 4156902 TDS413A12100 12,100 .4764 155 108 91 2,1 45 14
4162727 TDS403A12200 4156903 TDS413A12200 12,200 .4803 155 108 91 2,1 45 14
4162728 TDS403A12300 4156904 TDS413A12300 12,300 .4843 155 108 91 2,1 45 14
4162729 TDS403A12304 4156905 TDS413A12304 12,304 .4844 155 108 91 2,1 45 14
4162730 TDS403A12400 4156906 TDS413A12400 12,400 .4882 155 108 91 2,1 45 14
4162681 TDS403A12500 4148984 TDS413A12500 12,500 .4921 155 108 91 2,1 45 14
4162731 TDS403A12600 4156907 TDS413A12600 12,600 .4961 155 108 91 2,2 45 14
4162732 TDS403A12700 4156908 TDS413A12700 12,700 .5000 155 108 91 2,2 45 14
4162733 TDS403A12800 4156909 TDS413A12800 12,800 .5039 155 108 91 2,2 45 14
4162734 TDS403A12900 4156910 TDS413A12900 12,900 .5079 155 108 91 2,2 45 14
4162735 TDS403A13000 4156911 TDS413A13000 13,000 .5118 155 108 91 2,2 45 14
4162736 TDS403A13096 4156912 TDS413A13096 13,096 .5156 155 108 91 2,3 45 14
4162737 TDS403A13100 4156913 TDS413A13100 13,100 .5157 155 108 91 2,3 45 14
4162738 TDS403A13200 4156914 TDS413A13200 13,200 .5197 155 108 91 2,3 45 14
4162739 TDS403A13300 4156915 TDS413A13300 13,300 .5236 155 108 91 2,3 45 14
4162740 TDS403A13400 4156916 TDS413A13400 13,400 .5276 155 108 91 2,3 45 14
4162741 TDS403A13500 4156917 TDS413A13500 13,500 .5315 155 108 91 2,3 45 14
WID_Master16_Holemaking_SolidCarbideDrills_T070_T071_Metric_REBRAND.indd 71 10/29/15 1:22 PM
T72
LViWID M 16 H l ki S lidC bid D ill T072 T073 M i REBRANDO b 15 20153 52PM
widia.com
Solid Carbide Drills
TOP DRILL S™ with Through Coolant • Steel and Cast Iron
Solid Carbide Drills
(TDS403A • TDS413A • 8 x D — continued)
(continued)
WP20PD WK15PD
rst choice
alternate choice
D1 diameter
grade WP20PD
TiAlN
order # catalogue #
grade WK15PD
AlCrN
order # catalogue # mm in L L3 L4 max L5 LS D
4162742 TDS403A13600 4156918 TDS413A13600 13,600 .5354 155 108 91 2,3 45 14
4162743 TDS403A13700 4156919 TDS413A13700 13,700 .5394 155 108 91 2,4 45 14
4162744 TDS403A13800 4156920 TDS413A13800 13,800 .5433 155 108 91 2,4 45 14
4162745 TDS403A13891 4156921 TDS413A13891 13,891 .5469 155 108 91 2,4 45 14
4162746 TDS403A13900 4156922 TDS413A13900 13,900 .5472 155 108 91 2,4 45 14
4162747 TDS403A14000 4156923 TDS413A14000 14,000 .5512 155 108 91 2,4 45 14
4162748 TDS403A14100 4156924 TDS413A14100 14,100 .5551 171 121 101 2,4 48 16
4162749 TDS403A14200 4156925 TDS413A14200 14,200 .5591 171 121 101 2,5 48 16
4162750 TDS403A14288 4156926 TDS413A14288 14,288 .5625 171 121 101 2,5 48 16
4162751 TDS403A14300 4156927 TDS413A14300 14,300 .5630 171 121 101 2,5 48 16
4162752 TDS403A14400 4156928 TDS413A14400 14,400 .5669 171 121 101 2,5 48 16
4162753 TDS403A14500 4156929 TDS413A14500 14,500 .5709 171 121 101 2,5 48 16
4162754 TDS403A14600 4156930 TDS413A14600 14,600 .5748 171 121 101 2,5 48 16
4162755 TDS403A14684 4156931 TDS413A14684 14,684 .5781 171 121 101 2,5 48 16
4162756 TDS403A14700 4156932 TDS413A14700 14,700 .5787 171 121 101 2,5 48 16
4162757 TDS403A14800 4156933 TDS413A14800 14,800 .5827 171 121 101 2,6 48 16
4162758 TDS403A14900 4156934 TDS413A14900 14,900 .5866 171 121 101 2,6 48 16
4162759 TDS403A15000 4156935 TDS413A15000 15,000 .5906 171 121 101 2,6 48 16
4162760 TDS403A15083 4156936 TDS413A15083 15,083 .5938 171 121 101 2,6 48 16
4162761 TDS403A15100 4156937 TDS413A15100 15,100 .5945 171 121 101 2,6 48 16
4162762 TDS403A15200 4156938 TDS413A15200 15,200 .5984 171 121 101 2,6 48 16
4162763 TDS403A15300 4156939 TDS413A15300 15,300 .6024 171 121 101 2,6 48 16
4162764 TDS403A15400 4156940 TDS413A15400 15,400 .6063 171 121 101 2,7 48 16
4162765 TDS403A15479 4156941 TDS413A15479 15,479 .6094 171 121 101 2,7 48 16
4162766 TDS403A15500 4156942 TDS413A15500 15,500 .6102 171 121 101 2,7 48 16
4162767 TDS403A15600 4156943 TDS413A15600 15,600 .6142 171 121 101 2,7 48 16
4162768 TDS403A15700 4156944 TDS413A15700 15,700 .6181 171 121 101 2,7 48 16
4162769 TDS403A15800 4156945 TDS413A15800 15,800 .6220 171 121 101 2,7 48 16
4162770 TDS403A15875 4156946 TDS413A15875 15,875 .6250 171 121 101 2,7 48 16
4162771 TDS403A15900 4156947 TDS413A15900 15,900 .6260 171 121 101 2,8 48 16
4162772 TDS403A16000 4156948 TDS413A16000 16,000 .6299 171 121 101 2,8 48 16
4162773 TDS403A16100 4156949 TDS413A16100 16,100 .6339 185 135 113 2,8 48 18
4162774 TDS403A16200 4156950 TDS413A16200 16,200 .6378 185 135 113 2,8 48 18
4162775 TDS403A16271 4156951 TDS413A16271 16,271 .6406 185 135 113 2,8 48 18
4162776 TDS403A16300 4156952 TDS413A16300 16,300 .6417 185 135 113 2,8 48 18
4162777 TDS403A16400 4156953 TDS413A16400 16,400 .6457 185 135 113 2,8 48 18
4162778 TDS403A16500 4156954 TDS413A16500 16,500 .6496 185 135 113 2,9 48 18
4162779 TDS403A16600 4156955 TDS413A16600 16,600 .6535 185 135 113 2,9 48 18
4162780 TDS403A16670 4156956 TDS413A16670 16,670 .6563 185 135 113 2,9 48 18
4162781 TDS403A16700 4156957 TDS413A16700 16,700 .6575 185 135 113 2,9 48 18
WID_Master16_Holemaking_SolidCarbideDrills_T072_T073_Metric_REBRAND.indd 72 10/29/15 1:22 PM
T73
LViWID M 16 H l ki S lidC bid D ill T072 T073 M i REBRANDO b 1520153 52PM
widia.com
Solid Carbide Drills
TOP DRILL S™ with Through Coolant • Steel and Cast Iron
Solid Carbide Drills
rst choice
alternate choice
(TDS403A • TDS413A • 8 x D — continued)
WP20PD WK15PD
D1 diameter
grade WP20PD
TiAlN
order # catalogue #
grade WK15PD
AlCrN
order # catalogue # mm in L L3 L4 max L5 LS D
4162782 TDS403A16800 4156958 TDS413A16800 16,800 .6614 185 135 113 2,9 48 18
4162783 TDS403A16900 4156959 TDS413A16900 16,900 .6654 185 135 113 2,9 48 18
4162784 TDS403A17000 4156960 TDS413A17000 17,000 .6693 185 135 113 2,9 48 18
4162785 TDS403A17100 4156961 TDS413A17100 17,100 .6732 185 135 113 3,0 48 18
4162786 TDS403A17200 4156962 TDS413A17200 17,200 .6772 185 135 113 3,0 48 18
4162787 TDS403A17300 4156963 TDS413A17300 17,300 .6811 185 135 113 3,0 48 18
4162788 TDS403A17400 4156964 TDS413A17400 17,400 .6850 185 135 113 3,0 48 18
4162789 TDS403A17463 4156965 TDS413A17463 17,463 .6875 185 135 113 3,0 48 18
4162790 TDS403A17500 4156966 TDS413A17500 17,500 .6890 185 135 113 3,0 48 18
4162791 TDS403A17600 4156967 TDS413A17600 17,600 .6929 185 135 113 3,1 48 18
4162792 TDS403A17700 4156968 TDS413A17700 17,700 .6969 185 135 113 3,1 48 18
4162793 TDS403A17800 4156969 TDS413A17800 17,800 .7008 185 135 113 3,1 48 18
4162794 TDS403A17859 4156970 TDS413A17859 17,859 .7031 185 135 113 3,1 48 18
4162795 TDS403A17900 4156971 TDS413A17900 17,900 .7047 185 135 113 3,1 48 18
4162515 TDS403A18000 4157206 TDS413A18000 18,000 .7087 185 135 113 3,1 48 18
4162516 TDS403A18100 4157207 TDS413A18100 18,100 .7126 200 148 124 3,1 50 20
4162517 TDS403A18200 4157208 TDS413A18200 18,200 .7165 200 148 124 3,2 50 20
4162518 TDS403A18258 4157209 TDS413A18258 18,258 .7188 200 148 124 3,2 50 20
4162519 TDS403A18300 4157210 TDS413A18300 18,300 .7205 200 148 124 3,2 50 20
4162520 TDS403A18400 4157211 TDS413A18400 18,400 .7244 200 148 124 3,2 50 20
4162521 TDS403A18500 4157212 TDS413A18500 18,500 .7283 200 148 124 3,2 50 20
4162522 TDS403A18600 4157253 TDS413A18600 18,600 .7323 200 148 124 3,2 50 20
4162663 TDS403A18654 4157254 TDS413A18654 18,654 .7344 200 148 124 3,2 50 20
4162664 TDS403A18700 4157255 TDS413A18700 18,700 .7362 200 148 124 3,2 50 20
4162665 TDS403A18800 4157256 TDS413A18800 18,800 .7402 200 148 124 3,3 50 20
4162666 TDS403A18900 4157257 TDS413A18900 18,900 .7441 200 148 124 3,3 50 20
4162667 TDS403A19000 4157258 TDS413A19000 19,000 .7480 200 148 124 3,3 50 20
4162668 TDS403A19050 4157259 TDS413A19050 19,050 .7500 200 148 124 3,3 50 20
4162669 TDS403A19100 4157260 TDS413A19100 19,100 .7520 200 148 124 3,3 50 20
4162670 TDS403A19200 4157261 TDS413A19200 19,200 .7559 200 148 124 3,3 50 20
4162671 TDS403A19300 4157262 TDS413A19300 19,300 .7598 200 148 124 3,4 50 20
4162672 TDS403A19400 4157263 TDS413A19400 19,400 .7638 200 148 124 3,4 50 20
4162673 TDS403A19500 4157264 TDS413A19500 19,500 .7677 200 148 124 3,4 50 20
4162674 TDS403A19600 4157265 TDS413A19600 19,600 .7717 200 148 124 3,4 50 20
4162675 TDS403A19700 4157266 TDS413A19700 19,700 .7756 200 148 124 3,4 50 20
4162676 TDS403A19800 4157267 TDS413A19800 19,800 .7795 200 148 124 3,4 50 20
4162677 TDS403A19900 4157268 TDS413A19900 19,900 .7835 200 148 124 3,5 50 20
4162678 TDS403A20000 4157269 TDS413A20000 20,000 .7874 200 148 124 3,5 50 20
WID_Master16_Holemaking_SolidCarbideDrills_T072_T073_Metric_REBRAND.indd 73 10/29/15 1:22 PM
T74
LViWID M 16 H l ki S lidC bid D ill T074 T075 M i REBRANDN b 11 20158 14AM
widia.com
Solid Carbide Drills
Application Data • TOP DRILL S™ • Steel
TOP DRILL S • TDS202 • WP20PD
™
• Flood Coolant • Metric
TOP DRILL S • TDS401/TDS402/TDS403 • WP20PD • Through Coolant • Metric
Material
Group
Cutting Speed — vc Recommended Feed Rate (f) by Diameter
Range — m/min
min – max
Tool Diameter
(mm) 3,0 4,0 6,0 8,0 10,0 12,0 16,0 20,0
P
1
80 – 180 mm/r 0,08–0,16 0,11–0,19 0,13–0,26 0,16–0,32 0,16–0,36 0,21–0,40 0,24–0,47 0,29–0,58
2, 3, 4,
6, 7
80 – 160 mm/r 0,09–0,17 0,11–0,20 0,13–0,26 0,16–0,32 0,20–0,36 0,23–0,40 0,29–0,50 0,36–0,63
5, 9, 10,
11
80 – 140 mm/r 0,08–0,17 0,11–0,20 0,12–0,26 0,15–0,32 0,18–0,35 0,21–0,40 0,25–0,50 0,30–0,63
12, 13.1,
13.2
50 – 80 mm/r 0,06–0,11 0,08–0,13 0,11–0,21 0,10–0,23 0,13–0,25 0,14–0,28 0,29–0,33 0,25–0,44
M
14.1
40 – 60 mm/r 0,05–0,09 0,06–0,12 0,08–0,14 0,09–0,16 0,11–0,18 0,13–0,21 0,15–0,23 0,17–0,26
14.3
40 – 70 mm/r 0,05–0,11 0,07–0,13 0,09–0,14 0,11–0,19 0,11–0,21 0,13–0,23 0,15–0,26 0,17–0,29
14.2,
14.4
35 – 50 mm/r 0,05–0,09 0,07–0,12 0,08–0,13 0,09–0,16 0,11–0,18 0,13–0,20 0,15–0,22 0,17–0,26
Material
Group
Cutting Speed — vc Recommended Feed Rate (f) by Diameter
Range — m/min
min – max
Tool Diameter
(mm) 3,0 4,0 6,0 8,0 10,0 12,0 16,0 20,0
P
1
70 – 140 mm/r 0,08–0,15 0,10–0,18 0,12–0,25 0,15–0,30 0,15–0,34 0,20–0,38 0,23–0,45 0,28–0,55
2, 3, 4,
6, 7
70 – 140 mm/r 0,08–0,16 0,10–0,19 0,12–0,25 0,15–0,30 0,19–0,34 0,22–0,38 0,28–0,48 0,34–0,60
5, 9, 10,
11
60 – 120 mm/r 0,08–0,16 0,10–0,19 0,12–0,25 0,14–0,30 0,17–0,33 0,20–0,38 0,24–0,48 0,29–0,60
12, 13.1,
13.2
40 – 60 mm/r 0,06–0,10 0,08–0,12 0,10–0,20 0,10–0,22 0,13–0,24 0,14–0,27 0,18–0,32 0,24–0,42
M
14.1
30 – 50 mm/r 0,05–0,09 0,06–0,11 0,08–0,13 0,09–0,15 0,10–0,17 0,12–0,20 0,14–0,22 0,16–0,25
14.3
40 – 60 mm/r 0,05–0,10 0,07–0,12 0,09–0,13 0,10–0,18 0,10–0,20 0,12–0,22 0,14–0,25 0,16–0,28
14.2,
14.4
30 – 50 mm/r 0,05–0,09 0,07–0,11 0,08–0,12 0,09–0,15 0,10–0,17 0,12–0,19 0,14–0,21 0,16–0,25
Solid Carbide Drills
Metric
tolerance
nominal size range D1 tolerance m7 D tolerance h6
>3–6 0,004/0,016 0,000/-0,008
>6–10 0,006/0,021 0,000/-0,009
>10–18 0,007/0,025 0,000/-0,011
>18–25,4 0,008/0,029 0,000/-0,013
WID_Master16_Holemaking_SolidCarbideDrills_T074_T075_Metric_REBRAND.indd 74 11/11/15 8:57 AM
T75
LViWID M 16 H l ki S lidC bid D ill T074 T075 M i REBRANDN b 1120158 14AM
widia.com
Solid Carbide Drills
Application Data • TOP DRILL S™ • Cast Iron
Solid Carbide Drills
TOP DRILL S • TDS212 • WK15PD
™
• Flood Coolant • Metric
TOP DRILL S • TDS411/TDS412/TDS413 • WK15PD • Through Coolant • Metric
Material
Group
Cutting Speed
— vc Recommended Feed Rate (f) by Diameter
Range — m/min
min – max
Tool Diameter
(mm) 3,0 4,0 6,0 8,0 10,0 12,0 16,0 20,0
K
15, 16
80 – 190 mm/r 0,11–0,22 0,12–0,24 0,16–0,31 0,20–0,38 0,23–0,44 0,25–0,49 0,31–0,60 0,38–0,74
17, 18,
19
90 – 170 mm/r 0,12–0,16 0,13–0,19 0,16–0,25 0,20–0,31 0,23–0,36 0,25–0,40 0,31–0,48 0,38–0,60
20
80 – 150 mm/r 0,08–0,17 0,09–0,19 0,12–0,25 0,14–0,30 0,17–0,35 0,19–0,40 0,24–0,48 0,30–0,60
Material
Group
Cutting Speed
— vc Recommended Feed Rate (f) by Diameter
Range — m/min
min – max
Tool Diameter
(mm) 3,0 4,0 6,0 8,0 10,0 12,0 16,0 20,0
K
15, 16
70 – 170 mm/r 0,16–0,31 0,20–0,38 0,23–0,44 0,25–0,49 0,31–0,60 0,38–0,74 0,31–0,60 0,38–0,74
17, 18,
19
80 – 140 mm/r 0,16–0,25 0,20–0,31 0,23–0,36 0,25–0,40 0,31–0,48 0,38–0,60 0,31–0,48 0,38–0,60
20
70 – 130 mm/r 0,12–0,25 0,14–0,30 0,17–0,35 0,19–0,40 0,24–0,48 0,30–0,60 0,24–0,48 0,30–0,60
Metric
tolerance
nominal size range D1 tolerance m7 D tolerance h6
>3–6 0,004/0,016 0,000/-0,008
>6–10 0,006/0,021 0,000/-0,009
>10–18 0,007/0,025 0,000/-0,011
>18–25,4 0,008/0,029 0,000/-0,013
WID_Master16_Holemaking_SolidCarbideDrills_T074_T075_Metric_REBRAND.indd 75 11/11/15 8:57 AM
T76
LViWID M 16 H l ki S lidC bid D ill T076 T077 M i REBRANDO b 19 20156 32AM
widia.com
The WIDIA™ line of TOP DRILL S+ enables superior performance across a wide
variety of even the most complex and challenging applications, such as drilling
through inclined entries, x-holes, and exits. Proprietary technology ensures the
highest speed and feed rates available. Advanced grade and geometry features
defi ne the TOP DRILL S+ as a true troubleshooter.
• Suitable for a broad range of materials and applications.
• Ensures increased tool life and enhanced wear resistance.
• Facilitates consistent chip forming and breaking.
The versatile TOP DRILL S+ provides reliable performance across a broad scope
of applications, including alloyed and unalloyed steel, cast iron, and some stainless
steels and high-temperature alloys.
• Four-margin design ensures stability, consistency, and improved hole quality.
• PVD coating provides increased tool life and wear resistance.
• Through tool coolant and solid versions available standard.
TOP DRILL S+
Multiple-Application Drilling •
TOP DRILL S+™
WID_Master16_Holemaking_SolidCarbideDrills_T076_T077_Metric_REBRAND.indd 76 10/29/15 1:22 PM
T77
LViWID M 16 H l ki S lidC bid D ill T076 T077 M i REBRANDO b 1920156 32AM
widia.com
Use as Pilot Drill
• Ideal point angle and tolerance make the TOP DRILL S+™
drill the preferred pilot drill for TDD Series solid carbide
deep-hole drills.
TOP DRILL S+ Drill-Point Design
• Low thrust. Works well on a variety of machines.
• Excellent centring capabilities.
• Easy to regrind.
Four-Margin Land Design
• Improves hole straightness and roundness.
• Provides good alignment and stability in tough drilling
applications — even when drilling through cross holes.
WID_Master16_Holemaking_SolidCarbideDrills_T076_T077_Metric_REBRAND.indd 77 10/29/15 1:22 PM
T78
LViWID M 16 H l ki S lidC bid D ill T078 T079 M i REBRANDO b 15 20153 55PM
widia.com
WU25PD
(continued)
Solid Carbide Drills
TOP DRILL S+™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 3 x D
D1 diameter
grade WU25PD
TiAlN
order # catalogue # mm in D L3 L4 max L5 LS L
2964222 TDS301A03000 3,000 .1181 6 20 14 0,48 36 62
2964233 TDS301A03100 3,100 .1220 6 20 14 0,50 36 62
2964234 TDS301A03200 3,200 .1260 6 20 14 0,52 36 62
2964235 TDS301A03250 3,250 .1280 6 20 14 0,53 36 62
2964236 TDS301A03300 3,300 .1299 6 20 14 0,54 36 62
2964237 TDS301A03400 3,400 .1339 6 20 14 0,55 36 62
2964238 TDS301A03500 3,500 .1378 6 20 14 0,57 36 62
2964239 TDS301A03600 3,600 .1417 6 20 14 0,59 36 62
2964240 TDS301A03700 3,700 .1457 6 20 14 0,61 36 62
2964241 TDS301A03800 3,800 .1496 6 24 17 0,62 36 66
2964242 TDS301A03900 3,900 .1535 6 24 17 0,64 36 66
2964243 TDS301A04000 4,000 .1575 6 24 17 0,66 36 66
2964244 TDS301A04100 4,100 .1614 6 24 17 0,67 36 66
2964245 TDS301A04200 4,200 .1654 6 24 17 0,69 36 66
2964246 TDS301A04300 4,300 .1693 6 24 17 0,71 36 66
2964247 TDS301A04370 4,370 .1720 6 24 17 0,72 36 66
2964248 TDS301A04400 4,400 .1732 6 24 17 0,73 36 66
2964249 TDS301A04500 4,500 .1772 6 24 17 0,74 36 66
2964250 TDS301A04600 4,600 .1811 6 24 17 0,76 36 66
2964251 TDS301A04650 4,650 .1831 6 24 17 0,77 36 66
2964252 TDS301A04700 4,700 .1850 6 24 17 0,78 36 66
2964273 TDS301A04760 4,760 .1874 6 28 20 0,79 36 66
2964274 TDS301A04800 4,800 .1890 6 28 20 0,80 36 66
2964275 TDS301A04900 4,900 .1929 6 28 20 0,81 36 66
rst choice
alternate choice
TDS301A • 3 x D
Solid Carbide Drills
WID_Master16_Holemaking_SolidCarbideDrills_T078_T079_Metric_REBRAND.indd 78 10/29/15 1:22 PM
T79
LViWID M 16 H l ki S lidC bid D ill T078 T079 M i REBRANDO b 1520153 55PM
widia.com
WU25PD
Solid Carbide Drills
TOP DRILL S+™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 3 x D
D1 diameter
grade WU25PD
TiAlN
order # catalogue # mm in D L3 L4 max L5 LS L
2964276 TDS301A05000 5,000 .1969 6 28 20 0,83 36 66
2964277 TDS301A05100 5,100 .2008 6 28 20 0,85 36 66
2964278 TDS301A05160 5,160 .2031 6 28 20 0,86 36 66
2964279 TDS301A05200 5,200 .2047 6 28 20 0,87 36 66
2964280 TDS301A05300 5,300 .2087 6 28 20 0,88 36 66
2964281 TDS301A05400 5,400 .2126 6 28 20 0,90 36 66
2964282 TDS301A05500 5,500 .2165 6 28 20 0,92 36 66
2964293 TDS301A05550 5,550 .2185 6 28 20 0,93 36 66
2964294 TDS301A05560 5,560 .2189 6 28 20 0,93 36 66
2964295 TDS301A05600 5,600 .2205 6 28 20 0,94 36 66
2964296 TDS301A05700 5,700 .2244 6 28 20 0,95 36 66
2964297 TDS301A05800 5,800 .2283 6 28 20 0,97 36 66
2964298 TDS301A05900 5,900 .2323 6 28 20 0,99 36 66
2964299 TDS301A05950 5,950 .2343 6 28 20 1,00 36 66
2964300 TDS301A06000 6,000 .2362 6 28 20 1,00 36 66
2964301 TDS301A06100 6,100 .2402 8 34 24 1,02 36 79
2964302 TDS301A06200 6,200 .2441 8 34 24 1,04 36 79
2964313 TDS301A06300 6,300 .2480 8 34 24 1,06 36 79
2964314 TDS301A06350 6,350 .2500 8 34 24 1,07 36 79
2964315 TDS301A06400 6,400 .2520 8 34 24 1,07 36 79
2964316 TDS301A06500 6,500 .2559 8 34 24 1,09 36 79
2964317 TDS301A06600 6,600 .2598 8 34 24 1,11 36 79
2964318 TDS301A06700 6,700 .2638 8 34 24 1,13 36 79
2964319 TDS301A06750 6,750 .2657 8 34 24 1,14 36 79
2964320 TDS301A06800 6,800 .2677 8 34 24 1,14 36 79
2964321 TDS301A06900 6,900 .2717 8 34 24 1,16 36 79
2964322 TDS301A07000 7,000 .2756 8 34 24 1,18 36 79
2964333 TDS301A07100 7,100 .2795 8 41 29 1,20 36 79
2964334 TDS301A07140 7,140 .2811 8 41 29 1,20 36 79
2964335 TDS301A07200 7,200 .2835 8 41 29 1,21 36 79
2964336 TDS301A07300 7,300 .2874 8 41 29 1,23 36 79
2964337 TDS301A07400 7,400 .2913 8 41 29 1,25 36 79
2964338 TDS301A07500 7,500 .2953 8 41 29 1,27 36 79
2964339 TDS301A07540 7,540 .2969 8 41 29 1,27 36 79
2964340 TDS301A07600 7,600 .2992 8 41 29 1,29 36 79
2964341 TDS301A07700 7,700 .3031 8 41 29 1,30 36 79
2964342 TDS301A07800 7,800 .3071 8 41 29 1,32 36 79
2964353 TDS301A07900 7,900 .3110 8 41 29 1,34 36 79
2964354 TDS301A07940 7,940 .3126 8 41 29 1,34 36 79
2964355 TDS301A08000 8,000 .3150 8 41 29 1,36 36 79
rst choice
alternate choice
Solid Carbide Drills
(TDS301A • 3 x D — continued)
(continued)
WID_Master16_Holemaking_SolidCarbideDrills_T078_T079_Metric_REBRAND.indd 79 10/29/15 1:22 PM
T80
LViWID M 16 H l ki S lidC bid D ill T080 T081 M i REBRANDO b 15 20153 55PM
widia.com
WU25PD
(continued)
Solid Carbide Drills
TOP DRILL S+™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 3 x D
rst choice
alternate choice
Solid Carbide Drills
(TDS301A • 3 x D — continued)
D1 diameter
grade WU25PD
TiAlN
order # catalogue # mm in D L3 L4 max L5 LS L
2964356 TDS301A08100 8,100 .3189 10 47 35 1,37 40 89
2964357 TDS301A08200 8,200 .3228 10 47 35 1,39 40 89
2964358 TDS301A08300 8,300 .3268 10 47 35 1,41 40 89
2964359 TDS301A08330 8,330 .3280 10 47 35 1,41 40 89
2964360 TDS301A08400 8,400 .3307 10 47 35 1,43 40 89
2964361 TDS301A08500 8,500 .3346 10 47 35 1,44 40 89
2964362 TDS301A08600 8,600 .3386 10 47 35 1,46 40 89
2964373 TDS301A08700 8,700 .3425 10 47 35 1,48 40 89
2964374 TDS301A08800 8,800 .3465 10 47 35 1,50 40 89
2964375 TDS301A08900 8,900 .3504 10 47 35 1,51 40 89
2964376 TDS301A09000 9,000 .3543 10 47 35 1,53 40 89
2964377 TDS301A09100 9,100 .3583 10 47 35 1,55 40 89
2964378 TDS301A09130 9,130 .3594 10 47 35 1,55 40 89
2964379 TDS301A09200 9,200 .3622 10 47 35 1,57 40 89
2964380 TDS301A09300 9,300 .3661 10 47 35 1,58 40 89
2964381 TDS301A09400 9,400 .3701 10 47 35 1,60 40 89
2964382 TDS301A09500 9,500 .3740 10 47 35 1,62 40 89
2964393 TDS301A09520 9,520 .3748 10 47 35 1,62 40 89
2964394 TDS301A09600 9,600 .3780 10 47 35 1,64 40 89
2964395 TDS301A09700 9,700 .3819 10 47 35 1,65 40 89
2964396 TDS301A09800 9,800 .3858 10 47 35 1,67 40 89
2964397 TDS301A09900 9,900 .3898 10 47 35 1,69 40 89
2964398 TDS301A09920 9,920 .3906 10 47 35 1,69 40 89
2964399 TDS301A10000 10,000 .3937 10 47 35 1,71 40 89
2964400 TDS301A10100 10,100 .3976 12 55 40 1,73 45 102
2964401 TDS301A10200 10,200 .4016 12 55 40 1,74 45 102
2964402 TDS301A10300 10,300 .4055 12 55 40 1,76 45 102
2964413 TDS301A10320 10,320 .4063 12 55 40 1,76 45 102
2964414 TDS301A10400 10,400 .4094 12 55 40 1,78 45 102
2964415 TDS301A10500 10,500 .4134 12 55 40 1,80 45 102
2964416 TDS301A10600 10,600 .4173 12 55 40 1,81 45 102
2964417 TDS301A10700 10,700 .4213 12 55 40 1,83 45 102
2964418 TDS301A10720 10,720 .4220 12 55 40 1,83 45 102
2964419 TDS301A10800 10,800 .4252 12 55 40 1,85 45 102
2964420 TDS301A10900 10,900 .4291 12 55 40 1,87 45 102
2964421 TDS301A11000 11,000 .4331 12 55 40 1,88 45 102
2964423 TDS301A11100 11,100 .4370 12 55 40 1,90 45 102
2964424 TDS301A11110 11,110 .4374 12 55 40 1,90 45 102
2964425 TDS301A11200 11,200 .4409 12 55 40 1,92 45 102
2964426 TDS301A11300 11,300 .4449 12 55 40 1,94 45 102
WID_Master16_Holemaking_SolidCarbideDrills_T080_T081_Metric_REBRAND.indd 80 10/29/15 1:22 PM
T81
LViWID M 16 H l ki S lidC bid D ill T080 T081 M i REBRANDO b 1520153 55PM
widia.com
WU25PD
Solid Carbide Drills
TOP DRILL S+™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 3 x D
rst choice
alternate choice
Solid Carbide Drills
(TDS301A • 3 x D — continued)
D1 diameter
grade WU25PD
TiAlN
order # catalogue # mm in D L3 L4 max L5 LS L
2964427 TDS301A11400 11,400 .4488 12 55 40 1,95 45 102
2964428 TDS301A11500 11,500 .4528 12 55 40 1,97 45 102
2964429 TDS301A11600 11,600 .4567 12 55 40 1,99 45 102
2964430 TDS301A11700 11,700 .4606 12 55 40 2,01 45 102
2964431 TDS301A11800 11,800 .4646 12 55 40 2,03 45 102
2964432 TDS301A11900 11,900 .4685 12 55 40 2,04 45 102
2964433 TDS301A11910 11,910 .4689 12 55 40 2,04 45 102
2964434 TDS301A12000 12,000 .4724 12 55 40 2,06 45 102
2964435 TDS301A12300 12,300 .4843 14 60 43 2,11 45 107
2964436 TDS301A12500 12,500 .4921 14 60 43 2,15 45 107
2964437 TDS301A12700 12,700 .5000 14 60 43 2,18 45 107
2964438 TDS301A12800 12,800 .5039 14 60 43 2,20 45 107
2964439 TDS301A13000 13,000 .5118 14 60 43 2,24 45 107
2964440 TDS301A13500 13,500 .5315 14 60 43 2,33 45 107
2964441 TDS301A13800 13,800 .5433 14 60 43 2,38 45 107
2964442 TDS301A14000 14,000 .5512 14 60 43 2,41 45 107
2964443 TDS301A14290 14,290 .5626 16 65 45 2,47 48 115
2964444 TDS301A14500 14,500 .5709 16 65 45 2,50 48 115
2964445 TDS301A14800 14,800 .5827 16 65 45 2,56 48 115
2964446 TDS301A15000 15,000 .5906 16 65 45 2,59 48 115
2964447 TDS301A15500 15,500 .6102 16 65 45 2,68 48 115
2964448 TDS301A15800 15,800 .6220 16 65 45 2,73 48 115
2964449 TDS301A15870 15,870 .6248 16 65 45 2,75 48 115
2964450 TDS301A16000 16,000 .6299 16 65 45 2,77 48 115
2964451 TDS301A16500 16,500 .6496 18 73 51 2,86 48 123
2964452 TDS301A16670 16,670 .6563 18 73 51 2,89 48 123
2964453 TDS301A16800 16,800 .6614 18 73 51 2,91 48 123
2964454 TDS301A17000 17,000 .6693 18 73 51 2,95 48 123
2964455 TDS301A17500 17,500 .6890 18 73 51 3,04 48 123
2964456 TDS301A17800 17,800 .7008 18 73 51 3,09 48 123
2964457 TDS301A18000 18,000 .7087 18 73 51 3,12 48 123
2964458 TDS301A18500 18,500 .7283 20 79 55 3,21 50 131
2964459 TDS301A18800 18,800 .7402 20 79 55 3,27 50 131
2964460 TDS301A19000 19,000 .7480 20 79 55 3,30 50 131
2964461 TDS301A19050 19,050 .7500 20 79 55 3,31 50 131
2964462 TDS301A19500 19,500 .7677 20 79 55 3,39 50 131
2964463 TDS301A19800 19,800 .7795 20 79 55 3,44 50 131
2964464 TDS301A20000 20,000 .7874 20 79 55 3,48 50 131
WID_Master16_Holemaking_SolidCarbideDrills_T080_T081_Metric_REBRAND.indd 81 10/29/15 1:22 PM
T82
LViWID M 16 H l ki S lidC bid D ill T082 T083 M i REBRANDO b 15 20154 02PM
widia.com
WU25PD
(continued)
Solid Carbide Drills
TOP DRILL S+™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 3 x D
D1 diameter
grade WU25PD
TiAlN
order # catalogue # mm in D L3 L4 max L5 LS L
2964947 TDS501A03000 3,000 .1181 6 20 14 0,48 36 62
2964948 TDS501A03100 3,100 .1220 6 20 14 0,50 36 62
4051234 TDS501A03175 3,175 .1250 6 20 14 0,64 36 62
2964949 TDS501A03200 3,200 .1260 6 20 14 0,52 36 62
2964950 TDS501A03250 3,250 .1280 6 20 14 0,53 36 62
2964951 TDS501A03300 3,300 .1299 6 20 14 0,54 36 62
2964952 TDS501A03400 3,400 .1339 6 20 14 0,55 36 62
4051233 TDS501A03455 3,450 .1358 6 20 14 0,56 36 62
2964953 TDS501A03500 3,500 .1378 6 20 14 0,57 36 62
5661464 TDS501A03571 3,571 .1406 6 20 14 0,58 36 62
2964954 TDS501A03600 3,600 .1417 6 20 14 0,59 36 62
2964955 TDS501A03700 3,700 .1457 6 20 14 0,61 36 62
2964956 TDS501A03800 3,800 .1496 6 24 17 0,62 36 66
2964957 TDS501A03900 3,900 .1535 6 24 17 0,64 36 66
2964958 TDS501A04000 4,000 .1575 6 24 17 0,66 36 66
2964959 TDS501A04100 4,100 .1614 6 24 17 0,67 36 66
2964960 TDS501A04200 4,200 .1654 6 24 17 0,69 36 66
2964961 TDS501A04300 4,300 .1693 6 24 17 0,71 36 66
2964962 TDS501A04370 4,370 .1720 6 24 17 0,72 36 66
2964963 TDS501A04400 4,400 .1732 6 24 17 0,73 36 66
2964964 TDS501A04500 4,500 .1772 6 24 17 0,74 36 66
2964965 TDS501A04600 4,600 .1811 6 24 17 0,76 36 66
5661502 TDS501A04623 4,623 .1820 6 24 17 0,77 36 66
2964966 TDS501A04650 4,650 .1831 6 24 17 0,77 36 66
rst choice
alternate choice
TDS501A •3 x D
Solid Carbide Drills
WID_Master16_Holemaking_SolidCarbideDrills_T082_T083_Metric_REBRAND.indd 82 10/29/15 1:22 PM
T83
LViWID M 16 H l ki S lidC bid D ill T082 T083 M i REBRANDO b 1520154 02PM
widia.com
WU25PD
(continued)
Solid Carbide Drills
TOP DRILL S+™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 3 x D
D1 diameter
grade WU25PD
TiAlN
order # catalogue # mm in D L3 L4 max L5 LS L
2964967 TDS501A04700 4,700 .1850 6 24 17 0,78 36 66
5661503 TDS501A04763 4,763 .1875 6 28 20 0,79 36 66
2964969 TDS501A04800 4,800 .1890 6 28 20 0,80 36 66
2964970 TDS501A04900 4,900 .1929 6 28 20 0,81 36 66
2964971 TDS501A05000 5,000 .1969 6 28 20 0,83 36 66
2964972 TDS501A05100 5,100 .2008 6 28 20 0,85 36 66
2964973 TDS501A05160 5,160 .2031 6 28 20 0,86 36 66
2964974 TDS501A05200 5,200 .2047 6 28 20 0,87 36 66
2964975 TDS501A05300 5,300 .2087 6 28 20 0,88 36 66
2964976 TDS501A05400 5,400 .2126 6 28 20 0,90 36 66
5661504 TDS501A05410 5,410 .2130 6 28 20 0,90 36 66
2964977 TDS501A05500 5,500 .2165 6 28 20 0,92 36 66
2964978 TDS501A05550 5,550 .2185 6 28 20 0,93 36 66
5661505 TDS501A05558 5,558 .2188 6 28 20 0,93 36 66
2964980 TDS501A05600 5,600 .2205 6 28 20 0,94 36 66
2964981 TDS501A05700 5,700 .2244 6 28 20 0,95 36 66
2964982 TDS501A05800 5,800 .2283 6 28 20 0,97 36 66
2964983 TDS501A05900 5,900 .2323 6 28 20 0,99 36 66
2964984 TDS501A05950 5,950 .2343 6 28 20 1,00 36 66
2964985 TDS501A06000 6,000 .2362 6 28 20 1,00 36 66
2964986 TDS501A06100 6,100 .2402 8 34 24 1,02 36 79
2964987 TDS501A06200 6,200 .2441 8 34 24 1,04 36 79
2964988 TDS501A06300 6,300 .2480 8 34 24 1,06 36 79
2964989 TDS501A06350 6,350 .2500 8 34 24 1,07 36 79
2964990 TDS501A06400 6,400 .2520 8 34 24 1,07 36 79
2964991 TDS501A06500 6,500 .2559 8 34 24 1,09 36 79
5661506 TDS501A06528 6,528 .2570 8 34 24 1,10 36 79
2964992 TDS501A06600 6,600 .2598 8 34 24 1,11 36 79
2964993 TDS501A06700 6,700 .2638 8 34 24 1,13 36 79
5661507 TDS501A06746 6,746 .2656 8 34 24 1,14 36 79
2964995 TDS501A06800 6,800 .2677 8 34 24 1,14 36 79
2964996 TDS501A06900 6,900 .2717 8 34 24 1,16 36 79
2964997 TDS501A07000 7,000 .2756 8 34 24 1,18 36 79
2964998 TDS501A07100 7,100 .2795 8 41 29 1,20 36 79
5661509 TDS501A07145 7,145 .2813 8 41 29 1,21 36 79
2965000 TDS501A07200 7,200 .2835 8 41 29 1,21 36 79
2965001 TDS501A07300 7,300 .2874 8 41 29 1,23 36 79
2965002 TDS501A07400 7,400 .2913 8 41 29 1,25 36 79
2965003 TDS501A07500 7,500 .2953 8 41 29 1,27 36 79
2965004 TDS501A07541 7,540 .2969 8 41 29 1,27 36 79
(TDS501A • 3 x D — continued)
Solid Carbide Drills
rst choice
alternate choice
WID_Master16_Holemaking_SolidCarbideDrills_T082_T083_Metric_REBRAND.indd 83 10/29/15 1:22 PM
T84
LViWID M 16 H l ki S lidC bid D ill T084 T085 M i REBRANDO b 15 20154 02PM
widia.com
WU25PD
(continued)
Solid Carbide Drills
TOP DRILL S+™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 3 x D
(TDS501A • 3 x D — continued)
Solid Carbide Drills
rst choice
alternate choice
D1 diameter
grade WU25PD
TiAlN
order # catalogue # mm in D L3 L4 max L5 LS L
2965005 TDS501A07600 7,600 .2992 8 41 29 1,29 36 79
2965006 TDS501A07700 7,700 .3031 8 41 29 1,30 36 79
2965007 TDS501A07800 7,800 .3071 8 41 29 1,32 36 79
2965008 TDS501A07900 7,900 .3110 8 41 29 1,34 36 79
5661540 TDS501A07938 7,938 .3125 8 41 29 1,34 36 79
2965010 TDS501A08000 8,000 .3150 8 41 29 1,36 36 79
2965011 TDS501A08100 8,100 .3189 10 47 35 1,37 40 89
2965012 TDS501A08200 8,200 .3228 10 47 35 1,39 40 89
2965013 TDS501A08300 8,300 .3268 10 47 35 1,41 40 89
5661541 TDS501A08334 8,334 .3281 10 47 35 1,41 40 89
2965015 TDS501A08400 8,400 .3307 10 47 35 1,43 40 89
5661542 TDS501A08433 8,433 .3320 10 47 35 1,43 40 89
2965016 TDS501A08500 8,500 .3346 10 47 35 1,44 40 89
2965017 TDS501A08600 8,600 .3386 10 47 35 1,46 40 89
2965018 TDS501A08700 8,700 .3425 10 47 35 1,48 40 89
5661543 TDS501A08733 8,733 .3438 10 47 35 1,48 40 89
2965019 TDS501A08800 8,800 .3465 10 47 35 1,50 40 89
2965020 TDS501A08900 8,900 .3504 10 47 35 1,51 40 89
2965021 TDS501A09000 9,000 .3543 10 47 35 1,53 40 89
2965022 TDS501A09100 9,100 .3583 10 47 35 1,55 40 89
2965023 TDS501A09129 9,130 .3594 10 47 35 1,55 40 89
2965024 TDS501A09200 9,200 .3622 10 47 35 1,57 40 89
2965025 TDS501A09300 9,300 .3661 10 47 35 1,58 40 89
5661544 TDS501A09347 9,347 .3680 10 47 35 1,59 40 89
2965026 TDS501A09400 9,400 .3701 10 47 35 1,60 40 89
2965027 TDS501A09500 9,500 .3740 10 47 35 1,62 40 89
2965029 TDS501A09600 9,600 .3780 10 47 35 1,64 40 89
2965030 TDS501A09700 9,700 .3819 10 47 35 1,65 40 89
5661546 TDS501A09750 9,750 .3839 10 47 35 1,66 40 89
2965031 TDS501A09800 9,800 .3858 10 47 35 1,67 40 89
2965032 TDS501A09900 9,900 .3898 10 47 35 1,69 40 89
2965033 TDS501A09921 9,920 .3906 10 47 35 1,69 40 89
2965034 TDS501A10000 10,000 .3937 10 47 35 1,71 40 89
2965035 TDS501A10100 10,100 .3976 12 55 40 1,73 45 102
2965036 TDS501A10200 10,200 .4016 12 55 40 1,74 45 102
2965037 TDS501A10300 10,300 .4055 12 55 40 1,76 45 102
2965038 TDS501A10320 10,320 .4063 12 55 40 1,76 45 102
2965039 TDS501A10400 10,400 .4094 12 55 40 1,78 45 102
2965040 TDS501A10500 10,500 .4134 12 55 40 1,80 45 102
2965041 TDS501A10600 10,600 .4173 12 55 40 1,81 45 102
WID_Master16_Holemaking_SolidCarbideDrills_T084_T085_Metric_REBRAND.indd 84 10/29/15 1:22 PM
T85
LViWID M 16 H l ki S lidC bid D ill T084 T085 M i REBRANDO b 1520154 02PM
widia.com
WU25PD
(continued)
Solid Carbide Drills
TOP DRILL S+™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 3 x D
(TDS501A • 3 x D — continued)
Solid Carbide Drills
rst choice
alternate choice
D1 diameter
grade WU25PD
TiAlN
order # catalogue # mm in D L3 L4 max L5 LS L
2965042 TDS501A10700 10,700 .4213 12 55 40 1,83 45 102
5661547 TDS501A10716 10,716 .4219 12 55 40 1,83 45 102
2965044 TDS501A10800 10,800 .4252 12 55 40 1,85 45 102
2965045 TDS501A10900 10,900 .4291 12 55 40 1,87 45 102
2965046 TDS501A11000 11,000 .4331 12 55 40 1,88 45 102
2965047 TDS501A11100 11,100 .4370 12 55 40 1,90 45 102
2965048 TDS501A11113 11,113 .4375 12 55 40 1,90 45 102
2964736 TDS501A11200 11,200 .4409 12 55 40 1,92 45 102
2964737 TDS501A11300 11,300 .4449 12 55 40 1,94 45 102
2964738 TDS501A11400 11,400 .4488 12 55 40 1,95 45 102
2964739 TDS501A11500 11,500 .4528 12 55 40 1,97 45 102
2964740 TDS501A11600 11,600 .4567 12 55 40 1,99 45 102
2964741 TDS501A11700 11,700 .4606 12 55 40 2,01 45 102
2964742 TDS501A11800 11,800 .4646 12 55 40 2,03 45 102
2965053 TDS501A11900 11,900 .4685 12 55 40 2,04 45 102
2965054 TDS501A11910 11,910 .4689 12 55 40 2,04 45 102
2965055 TDS501A12000 12,000 .4724 12 55 40 2,06 45 102
2965056 TDS501A12300 12,300 .4843 14 60 43 2,11 45 107
5661548 TDS501A12304 12,304 .4844 14 60 43 2,11 45 107
2965057 TDS501A12500 12,500 .4921 14 60 43 2,15 45 107
2965058 TDS501A12700 12,700 .5000 14 60 43 2,18 45 107
2965059 TDS501A12800 12,800 .5039 14 60 43 2,20 45 107
2965060 TDS501A13000 13,000 .5118 14 60 43 2,24 45 107
4051235 TDS501A13100 13,100 .5157 14 60 43 2,79 45 107
2965061 TDS501A13500 13,500 .5315 14 60 43 2,33 45 107
2965062 TDS501A13800 13,800 .5433 14 60 43 2,38 45 107
2965063 TDS501A14000 14,000 .5512 14 60 43 2,41 45 107
2965064 TDS501A14290 14,290 .5626 16 65 45 2,47 48 115
2965065 TDS501A14500 14,500 .5709 16 65 45 2,50 48 115
2965066 TDS501A14800 14,800 .5827 16 65 45 2,56 48 115
2965067 TDS501A15000 15,000 .5906 16 65 45 2,59 48 115
2965068 TDS501A15500 15,500 .6102 16 65 45 2,68 48 115
2965069 TDS501A15800 15,800 .6220 16 65 45 2,73 48 115
2965070 TDS501A15870 15,870 .6248 16 65 45 2,75 48 115
2965071 TDS501A16000 16,000 .6299 16 65 45 2,77 48 115
2965072 TDS501A16500 16,500 .6496 18 73 51 2,86 48 123
2965073 TDS501A16670 16,670 .6563 18 73 51 2,89 48 123
2965074 TDS501A16800 16,800 .6614 18 73 51 2,91 48 123
2965075 TDS501A17000 17,000 .6693 18 73 51 2,95 48 123
2965076 TDS501A17500 17,500 .6890 18 73 51 3,04 48 123
WID_Master16_Holemaking_SolidCarbideDrills_T084_T085_Metric_REBRAND.indd 85 10/29/15 1:22 PM
T86
LViWID M 16 H l ki S lidC bid D ill T086 T087 M i REBRANDO b 15 20154 03PM
widia.com
WU25PD
Solid Carbide Drills
TOP DRILL S+™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 3 x D
(TDS501A • 3 x D — continued)
Solid Carbide Drills
rst choice
alternate choice
D1 diameter
grade WU25PD
TiAlN
order # catalogue # mm in D L3 L4 max L5 LS L
2965077 TDS501A17800 17,800 .7008 18 73 51 3,09 48 123
2965078 TDS501A18000 18,000 .7087 18 73 51 3,12 48 123
2965079 TDS501A18500 18,500 .7283 20 79 55 3,21 50 131
2965080 TDS501A18800 18,800 .7402 20 79 55 3,27 50 131
2965081 TDS501A19000 19,000 .7480 20 79 55 3,30 50 131
2965082 TDS501A19050 19,050 .7500 20 79 55 3,31 50 131
2965083 TDS501A19500 19,500 .7677 20 79 55 3,39 50 131
2965084 TDS501A19800 19,800 .7795 20 79 55 3,44 50 131
2965085 TDS501A20000 20,000 .7874 20 79 55 3,48 50 131
WID_Master16_Holemaking_SolidCarbideDrills_T086_T087_Metric_REBRAND.indd 86 10/29/15 1:22 PM
T87
LViWID M 16 H l ki S lidC bid D ill T086 T087 M i REBRANDO b 1520154 03PM
widia.com
WU25PD
(continued)
Solid Carbide Drills
TOP DRILL S+™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 5 x D
D1 diameter
grade WU25PD
TiAlN
order # catalogue # mm in D L3 L4 max L5 LS L
2964803 TDS502A03000 3,000 .1181 6 28 23 0,48 36 66
2964804 TDS502A03100 3,100 .1220 6 28 23 0,50 36 66
4051237 TDS502A03175 3,175 .1250 6 28 23 0,64 36 66
2964805 TDS502A03200 3,200 .1260 6 28 23 0,52 36 66
2964806 TDS502A03250 3,250 .1280 6 28 23 0,53 36 66
2964807 TDS502A03300 3,300 .1299 6 28 23 0,54 36 66
2964808 TDS502A03400 3,400 .1339 6 28 23 0,55 36 66
4051236 TDS502A03455 3,455 .1360 6 28 23 0,70 36 66
2964809 TDS502A03500 3,500 .1378 6 28 23 0,57 36 66
2964810 TDS502A03600 3,600 .1417 6 28 23 0,59 36 66
2964811 TDS502A03700 3,700 .1457 6 28 23 0,61 36 66
2964812 TDS502A03800 3,800 .1496 6 36 29 0,62 36 74
2964813 TDS502A03900 3,900 .1535 6 36 29 0,64 36 74
2964814 TDS502A04000 4,000 .1575 6 36 29 0,66 36 74
2964815 TDS502A04100 4,100 .1614 6 36 29 0,67 36 74
2964816 TDS502A04200 4,200 .1654 6 36 29 0,69 36 74
2964817 TDS502A04300 4,300 .1693 6 36 29 0,71 36 74
2964818 TDS502A04370 4,370 .1720 6 36 29 0,72 36 74
2964819 TDS502A04400 4,400 .1732 6 36 29 0,73 36 74
2964820 TDS502A04500 4,500 .1772 6 36 29 0,74 36 74
2964821 TDS502A04600 4,600 .1811 6 36 29 0,76 36 74
2964822 TDS502A04650 4,650 .1831 6 36 29 0,77 36 74
2964823 TDS502A04700 4,700 .1850 6 36 29 0,78 36 74
2964824 TDS502A04760 4,760 .1874 6 44 35 0,79 36 82
rst choice
alternate choice
TDS502A • 5 x D
Solid Carbide Drills
WID_Master16_Holemaking_SolidCarbideDrills_T086_T087_Metric_REBRAND.indd 87 10/29/15 1:22 PM
T88
LViWID M 16 H l ki S lidC bid D ill T088 T089 M i REBRANDO b 15 20154 04PM
widia.com
WU25PD
(continued)
Solid Carbide Drills
TOP DRILL S+™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 5 x D
Solid Carbide Drills
(TDS502A • 5 x D — continued)
rst choice
alternate choice
D1 diameter
grade WU25PD
TiAlN
order # catalogue # mm in D L3 L4 max L5 LS L
2964825 TDS502A04800 4,800 .1890 6 44 35 0,80 36 82
2964826 TDS502A04900 4,900 .1929 6 44 35 0,81 36 82
2964827 TDS502A05000 5,000 .1969 6 44 35 0,83 36 82
2964828 TDS502A05100 5,100 .2008 6 44 35 0,85 36 82
2964829 TDS502A05160 5,160 .2031 6 44 35 0,86 36 82
2964830 TDS502A05200 5,200 .2047 6 44 35 0,87 36 82
2964831 TDS502A05300 5,300 .2087 6 44 35 0,88 36 82
2964832 TDS502A05400 5,400 .2126 6 44 35 0,90 36 82
2964833 TDS502A05500 5,500 .2165 6 44 35 0,92 36 82
2964834 TDS502A05550 5,550 .2185 6 44 35 0,93 36 82
2964835 TDS502A05560 5,560 .2189 6 44 35 0,93 36 82
2964836 TDS502A05600 5,600 .2205 6 44 35 0,94 36 82
2964837 TDS502A05700 5,700 .2244 6 44 35 0,95 36 82
2964838 TDS502A05800 5,800 .2283 6 44 35 0,97 36 82
2964839 TDS502A05900 5,900 .2323 6 44 35 0,99 36 82
2964840 TDS502A05950 5,950 .2343 6 44 35 1,00 36 82
2964841 TDS502A06000 6,000 .2362 6 44 35 1,00 36 82
2964842 TDS502A06100 6,100 .2402 8 53 43 1,02 36 91
2964843 TDS502A06200 6,200 .2441 8 53 43 1,04 36 91
2964844 TDS502A06300 6,300 .2480 8 53 43 1,06 36 91
2964845 TDS502A06350 6,350 .2500 8 53 43 1,07 36 91
2964846 TDS502A06400 6,400 .2520 8 53 43 1,07 36 91
2964847 TDS502A06500 6,500 .2559 8 53 43 1,09 36 91
2964848 TDS502A06600 6,600 .2598 8 53 43 1,11 36 91
2964849 TDS502A06700 6,700 .2638 8 53 43 1,13 36 91
2964850 TDS502A06750 6,750 .2657 8 53 43 1,14 36 91
2964851 TDS502A06800 6,800 .2677 8 53 43 1,14 36 91
2964852 TDS502A06900 6,900 .2717 8 53 43 1,16 36 91
2964853 TDS502A07000 7,000 .2756 8 53 43 1,18 36 91
2964854 TDS502A07100 7,100 .2795 8 53 43 1,20 36 91
2964855 TDS502A07140 7,140 .2811 8 53 43 1,20 36 91
2964856 TDS502A07200 7,200 .2835 8 53 43 1,21 36 91
2964857 TDS502A07300 7,300 .2874 8 53 43 1,23 36 91
2964858 TDS502A07400 7,400 .2913 8 53 43 1,25 36 91
2964859 TDS502A07500 7,500 .2953 8 53 43 1,27 36 91
2964860 TDS502A07540 7,540 .2969 8 53 43 1,27 36 91
2964861 TDS502A07600 7,600 .2992 8 53 43 1,29 36 91
2964862 TDS502A07700 7,700 .3031 8 53 43 1,30 36 91
2964863 TDS502A07800 7,800 .3071 8 53 43 1,32 36 91
2964864 TDS502A07900 7,900 .3110 8 53 43 1,34 36 91
WID_Master16_Holemaking_SolidCarbideDrills_T088_T089_Metric_REBRAND.indd 88 10/29/15 1:22 PM
T89
LViWID M 16 H l ki S lidC bid D ill T088 T089 M i REBRANDO b 1520154 04PM
widia.com
WU25PD
Solid Carbide Drills
TOP DRILL S+™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 5 x D
Solid Carbide Drills
(continued)
(TDS502A • 5 x D — continued)
rst choice
alternate choice
D1 diameter
grade WU25PD
TiAlN
order # catalogue # mm in D L3 L4 max L5 LS L
2964865 TDS502A07940 7,940 .3126 8 53 43 1,34 36 91
2964866 TDS502A08000 8,000 .3150 8 53 43 1,36 36 91
2964867 TDS502A08100 8,100 .3189 10 61 49 1,37 40 103
2964868 TDS502A08200 8,200 .3228 10 61 49 1,39 40 103
2964869 TDS502A08300 8,300 .3268 10 61 49 1,41 40 103
2964870 TDS502A08330 8,330 .3280 10 61 49 1,41 40 103
2964871 TDS502A08400 8,400 .3307 10 61 49 1,43 40 103
2964872 TDS502A08500 8,500 .3346 10 61 49 1,44 40 103
2964873 TDS502A08600 8,600 .3386 10 61 49 1,46 40 103
2964874 TDS502A08700 8,700 .3425 10 61 49 1,48 40 103
2964875 TDS502A08800 8,800 .3465 10 61 49 1,50 40 103
2964876 TDS502A08900 8,900 .3504 10 61 49 1,51 40 103
2964877 TDS502A09000 9,000 .3543 10 61 49 1,53 40 103
2964878 TDS502A09100 9,100 .3583 10 61 49 1,55 40 103
2964879 TDS502A09130 9,130 .3594 10 61 49 1,55 40 103
2964880 TDS502A09200 9,200 .3622 10 61 49 1,57 40 103
2964881 TDS502A09300 9,300 .3661 10 61 49 1,58 40 103
2964882 TDS502A09400 9,400 .3701 10 61 49 1,60 40 103
2964883 TDS502A09500 9,500 .3740 10 61 49 1,62 40 103
2964884 TDS502A09520 9,520 .3748 10 61 49 1,62 40 103
2964885 TDS502A09600 9,600 .3780 10 61 49 1,64 40 103
2964886 TDS502A09700 9,700 .3819 10 61 49 1,65 40 103
2964887 TDS502A09800 9,800 .3858 10 61 49 1,67 40 103
2964888 TDS502A09900 9,900 .3898 10 61 49 1,69 40 103
2964889 TDS502A09920 9,920 .3906 10 61 49 1,69 40 103
2964890 TDS502A10000 10,000 .3937 10 61 49 1,71 40 103
2964891 TDS502A10100 10,100 .3976 12 71 56 1,73 45 118
2964892 TDS502A10200 10,200 .4016 12 71 56 1,74 45 118
2964893 TDS502A10300 10,300 .4055 12 71 56 1,76 45 118
2964894 TDS502A10320 10,320 .4063 12 71 56 1,76 45 118
2964895 TDS502A10400 10,400 .4094 12 71 56 1,78 45 118
2964896 TDS502A10500 10,500 .4134 12 71 56 1,80 45 118
2964897 TDS502A10600 10,600 .4173 12 71 56 1,81 45 118
2964898 TDS502A10700 10,700 .4213 12 71 56 1,83 45 118
2964899 TDS502A10720 10,720 .4220 12 71 56 1,83 45 118
2964900 TDS502A10800 10,800 .4252 12 71 56 1,85 45 118
2964901 TDS502A10900 10,900 .4291 12 71 56 1,87 45 118
2964902 TDS502A11000 11,000 .4331 12 71 56 1,88 45 118
2964903 TDS502A11100 11,100 .4370 12 71 56 1,90 45 118
2964904 TDS502A11110 11,110 .4374 12 71 56 1,90 45 118
WID_Master16_Holemaking_SolidCarbideDrills_T088_T089_Metric_REBRAND.indd 89 10/29/15 1:22 PM
T90
LViWID M 16 H l ki S lidC bid D ill T090 T091 M i REBRANDO b 15 20154 05PM
widia.com
WU25PD
Solid Carbide Drills
TOP DRILL S+™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 5 x D
Solid Carbide Drills
(TDS502A • 5 x D — continued)
rst choice
alternate choice
D1 diameter
grade WU25PD
TiAlN
order # catalogue # mm in D L3 L4 max L5 LS L
2964905 TDS502A11200 11,200 .4409 12 71 56 1,92 45 118
2964906 TDS502A11300 11,300 .4449 12 71 56 1,94 45 118
2968374 TDS502A11400 11,400 .4488 12 71 56 1,95 45 118
2968375 TDS502A11500 11,500 .4528 12 71 56 1,97 45 118
2968376 TDS502A11600 11,600 .4567 12 71 56 1,99 45 118
2968377 TDS502A11700 11,700 .4606 12 71 56 2,01 45 118
2968378 TDS502A11800 11,800 .4646 12 71 56 2,03 45 118
2968379 TDS502A11900 11,900 .4685 12 71 56 2,04 45 118
2968380 TDS502A11910 11,910 .4689 12 71 56 2,04 45 118
2968381 TDS502A12000 12,000 .4724 12 71 56 2,06 45 118
2968382 TDS502A12300 12,300 .4843 14 77 60 2,11 45 124
2968393 TDS502A12500 12,500 .4921 14 77 60 2,15 45 124
2968394 TDS502A12700 12,700 .5000 14 77 60 2,18 45 124
2968395 TDS502A12800 12,800 .5039 14 77 60 2,20 45 124
2968396 TDS502A13000 13,000 .5118 14 77 60 2,24 45 124
4051238 TDS502A13100 13,100 .5157 14 77 60 2,79 45 124
2968397 TDS502A13500 13,500 .5315 14 77 60 2,33 45 124
2968398 TDS502A13800 13,800 .5433 14 77 60 2,38 45 124
2968399 TDS502A14000 14,000 .5512 14 77 60 2,41 45 124
2968400 TDS502A14290 14,290 .5626 16 83 63 2,47 48 133
2968401 TDS502A14500 14,500 .5709 16 83 63 2,50 48 133
2968402 TDS502A14800 14,800 .5827 16 83 63 2,56 48 133
2968403 TDS502A15000 15,000 .5906 16 83 63 2,59 48 133
2968404 TDS502A15500 15,500 .6102 16 83 63 2,68 48 133
2968405 TDS502A15800 15,800 .6220 16 83 63 2,73 48 133
2968406 TDS502A15870 15,870 .6248 16 83 63 2,75 48 133
2968407 TDS502A16000 16,000 .6299 16 83 63 2,77 48 133
2968408 TDS502A16500 16,500 .6496 18 93 71 2,86 48 143
2968409 TDS502A16670 16,670 .6563 18 93 71 2,89 48 143
2968410 TDS502A16800 16,800 .6614 18 93 71 2,91 48 143
2968411 TDS502A17000 17,000 .6693 18 93 71 2,95 48 143
2968412 TDS502A17500 17,500 .6890 18 93 71 3,04 48 143
2968413 TDS502A17800 17,800 .7008 18 93 71 3,09 48 143
2968414 TDS502A18000 18,000 .7087 18 93 71 3,12 48 143
2968415 TDS502A18500 18,500 .7283 20 101 77 3,21 50 153
2968416 TDS502A18800 18,800 .7402 20 101 77 3,27 50 153
2968417 TDS502A19000 19,000 .7480 20 101 77 3,30 50 153
2968418 TDS502A19050 19,050 .7500 20 101 77 3,31 50 153
2968419 TDS502A19500 19,500 .7677 20 101 77 3,39 50 153
2968420 TDS502A19800 19,800 .7795 20 101 77 3,44 50 153
2968421 TDS502A20000 20,000 .7874 20 101 77 3,48 50 153
WID_Master16_Holemaking_SolidCarbideDrills_T090_T091_Metric_REBRAND.indd 90 10/29/15 1:22 PM
T91
LViWID M 16 H l ki S lidC bid D ill T090 T091 M i REBRANDO b 1520154 05PM
widia.com
WU25PD
(continued)
Solid Carbide Drills
TOP DRILL S+™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 8 x D
D1 diameter
grade WU25PD
TiAlN
order # catalogue # mm in D L3 L4 max L5 LS L
2968422 TDS503A03000 3,000 .1181 6 40 33 0,61 36 78
4051239 TDS503A03100 3,100 .1220 6 40 33 0,63 36 78
4051240 TDS503A03175 3,175 .1250 6 40 33 0,64 36 78
4051241 TDS503A03200 3,200 .1260 6 40 33 0,65 36 78
4051242 TDS503A03250 3,250 .1280 6 40 33 0,66 36 78
2968503 TDS503A03300 3,300 .1299 6 40 33 0,67 36 78
4051243 TDS503A03400 3,400 .1339 6 40 33 0,69 36 78
4051244 TDS503A03455 3,455 .1360 6 40 33 0,70 36 78
2968504 TDS503A03500 3,500 .1378 6 40 33 0,71 36 78
2968505 TDS503A03700 3,700 .1457 6 40 33 0,76 36 78
2968506 TDS503A03800 3,800 .1496 6 49 41 0,78 36 87
4051245 TDS503A03900 3,900 .1535 6 49 41 0,80 36 87
2968507 TDS503A04000 4,000 .1575 6 49 41 0,82 36 87
4051246 TDS503A04100 4,100 .1614 6 49 41 0,84 36 87
2968508 TDS503A04200 4,200 .1654 6 49 41 0,86 36 87
4051247 TDS503A04300 4,300 .1693 6 49 41 0,88 36 87
2968509 TDS503A04370 4,370 .1720 6 49 41 0,90 36 87
4051248 TDS503A04400 4,400 .1732 6 49 41 0,91 36 87
2968510 TDS503A04500 4,500 .1772 6 49 41 0,93 36 87
4051249 TDS503A04600 4,600 .1811 6 49 41 0,95 36 87
4051250 TDS503A04650 4,650 .1831 6 49 41 0,96 36 87
2968511 TDS503A04700 4,700 .1850 6 49 41 0,97 36 87
2968512 TDS503A04760 4,760 .1874 6 56 48 0,98 36 94
2968513 TDS503A04800 4,800 .1890 6 56 48 0,99 36 94
rst choice
alternate choice
Solid Carbide Drills
TDS503A • 8 x D
WID_Master16_Holemaking_SolidCarbideDrills_T090_T091_Metric_REBRAND.indd 91 10/29/15 1:22 PM
T92
LViWID M 16 H l ki S lidC bid D ill T092 T093 M i REBRANDO b 15 20154 05PM
widia.com
WU25PD
(continued)
Solid Carbide Drills
TOP DRILL S+™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 8 x D
Solid Carbide Drills
(TDS503A • 8 x D — continued)
rst choice
alternate choice
D1 diameter
grade WU25PD
TiAlN
order # catalogue # mm in D L3 L4 max L5 LS L
4051251 TDS503A04900 4,900 .1929 6 56 48 1,01 36 94
2968514 TDS503A05000 5,000 .1969 6 56 48 1,03 36 94
4051252 TDS503A05100 5,100 .2008 6 56 48 1,06 36 94
2968515 TDS503A05160 5,160 .2031 6 56 48 1,07 36 94
4051253 TDS503A05200 5,200 .2047 6 56 48 1,08 36 94
4051254 TDS503A05300 5,300 .2087 6 56 48 1,10 36 94
4051255 TDS503A05400 5,400 .2126 6 56 48 1,12 36 94
2968516 TDS503A05500 5,500 .2165 6 56 48 1,14 36 94
4051256 TDS503A05550 5,550 .2185 6 56 48 1,15 36 94
2968517 TDS503A05560 5,560 .2189 6 56 48 1,15 36 94
4051257 TDS503A05600 5,600 .2205 6 56 48 1,16 36 94
4051258 TDS503A05700 5,700 .2244 6 56 48 1,18 36 94
2968518 TDS503A05800 5,800 .2283 6 56 48 1,21 36 94
4051259 TDS503A05900 5,900 .2323 6 56 48 1,23 36 94
2968519 TDS503A05950 5,950 .2343 6 56 48 1,24 36 94
2968520 TDS503A06000 6,000 .2362 6 56 48 1,25 36 94
4051260 TDS503A06100 6,100 .2402 8 67 57 1,27 36 105
4051261 TDS503A06200 6,200 .2441 8 67 57 1,29 36 105
4051262 TDS503A06300 6,300 .2480 8 67 57 1,31 36 105
2968521 TDS503A06350 6,350 .2500 8 67 57 1,32 36 105
4051263 TDS503A06400 6,400 .2520 8 67 57 1,33 36 105
2968522 TDS503A06500 6,500 .2559 8 67 57 1,36 36 105
4051264 TDS503A06600 6,600 .2598 8 67 57 1,38 36 105
4051265 TDS503A06700 6,700 .2638 8 67 57 1,40 36 105
2968523 TDS503A06750 6,750 .2657 8 67 57 1,41 36 105
2968524 TDS503A06800 6,800 .2677 8 67 57 1,42 36 105
4051266 TDS503A06900 6,900 .2717 8 67 57 1,44 36 105
2968525 TDS503A07000 7,000 .2756 8 67 57 1,46 36 105
4051267 TDS503A07100 7,100 .2795 8 72 61 1,49 36 110
2968526 TDS503A07140 7,140 .2811 8 72 61 1,49 36 110
4051268 TDS503A07200 7,200 .2835 8 72 61 1,51 36 110
4051269 TDS503A07300 7,300 .2874 8 72 61 1,53 36 110
4051270 TDS503A07400 7,400 .2913 8 72 61 1,55 36 110
2968527 TDS503A07500 7,500 .2953 8 72 61 1,57 36 110
2968528 TDS503A07540 7,540 .2969 8 72 61 1,58 36 110
3998454 TDS503A07600 7,600 .2992 8 72 61 1,59 36 110
4051271 TDS503A07700 7,700 .3031 8 72 61 1,62 36 110
2968529 TDS503A07800 7,800 .3071 8 72 61 1,64 36 110
4051272 TDS503A07900 7,900 .3110 8 72 61 1,66 36 110
2968530 TDS503A07940 7,940 .3126 8 72 61 1,67 36 110
WID_Master16_Holemaking_SolidCarbideDrills_T092_T093_Metric_REBRAND.indd 92 10/29/15 1:23 PM
T93
LViWID M 16 H l ki S lidC bid D ill T092 T093 M i REBRANDO b 1520154 05PM
widia.com
WU25PD
Solid Carbide Drills
TOP DRILL S+™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 8 x D
Solid Carbide Drills
(TDS503A • 8 x D — continued)
rst choice
alternate choice
(continued)
D1 diameter
grade WU25PD
TiAlN
order # catalogue # mm in D L3 L4 max L5 LS L
2968531 TDS503A08000 8,000 .3150 8 72 61 1,68 36 110
4051273 TDS503A08100 8,100 .3189 10 80 68 1,70 40 122
4051274 TDS503A08200 8,200 .3228 10 80 68 1,72 40 122
4051275 TDS503A08300 8,300 .3268 10 80 68 1,75 40 122
2968532 TDS503A08330 8,330 .3280 10 80 68 1,75 40 122
4051276 TDS503A08400 8,400 .3307 10 80 68 1,77 40 122
2968533 TDS503A08500 8,500 .3346 10 80 68 1,79 40 122
4051277 TDS503A08600 8,600 .3386 10 80 68 1,81 40 122
4051278 TDS503A08700 8,700 .3425 10 80 68 1,83 40 122
4051279 TDS503A08800 8,800 .3465 10 80 68 1,85 40 122
4051280 TDS503A08900 8,900 .3504 10 80 68 1,88 40 122
2968534 TDS503A09000 9,000 .3543 10 80 68 1,90 40 122
4051281 TDS503A09100 9,100 .3583 10 80 68 1,92 40 122
2968535 TDS503A09130 9,130 .3594 10 80 68 1,93 40 122
4051282 TDS503A09200 9,200 .3622 10 80 68 1,94 40 122
4051283 TDS503A09300 9,300 .3661 10 80 68 1,96 40 122
4051284 TDS503A09400 9,400 .3701 10 80 68 1,98 40 122
2968536 TDS503A09500 9,500 .3740 10 80 68 2,01 40 122
2968537 TDS503A09520 9,520 .3748 10 80 68 2,01 40 122
4051285 TDS503A09600 9,600 .3780 10 80 68 2,03 40 122
4051286 TDS503A09700 9,700 .3819 10 80 68 2,05 40 122
2968538 TDS503A09800 9,800 .3858 10 80 68 2,07 40 122
4051287 TDS503A09900 9,900 .3898 10 80 68 2,09 40 122
2968539 TDS503A09920 9,920 .3906 10 80 68 2,10 40 122
2968540 TDS503A10000 10,000 .3937 10 80 68 2,11 40 122
4051288 TDS503A10100 10,100 .3976 12 94 79 2,14 45 141
2968541 TDS503A10200 10,200 .4016 12 94 79 2,16 45 141
4051289 TDS503A10300 10,300 .4055 12 94 79 2,18 45 141
2968542 TDS503A10320 10,320 .4063 12 94 79 2,18 45 141
4051290 TDS503A10400 10,400 .4094 12 94 79 2,20 45 141
2968543 TDS503A10500 10,500 .4134 12 94 79 2,22 45 141
4051291 TDS503A10600 10,600 .4173 12 94 79 2,24 45 141
4051292 TDS503A10700 10,700 .4213 12 94 79 2,27 45 141
2968544 TDS503A10720 10,720 .4220 12 94 79 2,27 45 141
2968545 TDS503A10800 10,800 .4252 12 94 79 2,29 45 141
4051293 TDS503A10900 10,900 .4291 12 94 79 2,31 45 141
2968546 TDS503A11000 11,000 .4331 12 94 79 2,33 45 141
4051294 TDS503A11100 11,100 .4370 12 94 79 2,35 45 141
3998456 TDS503A11110 11,110 .4374 12 94 79 2,35 45 141
4051295 TDS503A11200 11,200 .4409 12 94 79 2,37 45 141
WID_Master16_Holemaking_SolidCarbideDrills_T092_T093_Metric_REBRAND.indd 93 10/29/15 1:23 PM
T94
LViWID M 16 H l ki S lidC bid D ill T094 T095 M i REBRANDO b 15 20154 06PM
widia.com
WU25PD
(TDS503A • 8 x D — continued)
Solid Carbide Drills
TOP DRILL S+™ • Steel, Stainless Steel, Cast Iron, Aluminium, and High-Temp Alloys • 8 x D
rst choice
alternate choice
Solid Carbide Drills
D1 diameter
grade WU25PD
TiAlN
order # catalogue # mm in D L3 L4 max L5 LS L
4051296 TDS503A11300 11,300 .4449 12 94 79 2,40 45 141
4051297 TDS503A11400 11,400 .4488 12 94 79 2,42 45 141
2968547 TDS503A11500 11,500 .4528 12 94 79 2,44 45 141
4051298 TDS503A11600 11,600 .4567 12 94 79 2,46 45 141
4051299 TDS503A11700 11,700 .4606 12 94 79 2,48 45 141
2968548 TDS503A11800 11,800 .4646 12 94 79 2,50 45 141
4051300 TDS503A11900 11,900 .4685 12 94 79 2,53 45 141
2968549 TDS503A11910 11,910 .4689 12 94 79 2,53 45 141
2968550 TDS503A12000 12,000 .4724 12 94 79 2,55 45 141
2968551 TDS503A12300 12,300 .4843 14 108 91 2,61 45 155
2968552 TDS503A12500 12,500 .4921 14 108 91 2,66 45 155
2968553 TDS503A12700 12,700 .5000 14 108 91 2,70 45 155
2968554 TDS503A12800 12,800 .5039 14 108 91 2,72 45 155
2968555 TDS503A13000 13,000 .5118 14 108 91 2,77 45 155
4051301 TDS503A13100 13,100 .5157 14 108 91 2,79 45 155
2968556 TDS503A13500 13,500 .5315 14 108 91 2,87 45 155
2968557 TDS503A13800 13,800 .5433 14 108 91 2,94 45 155
2968558 TDS503A14000 14,000 .5512 14 108 91 2,98 45 155
2968559 TDS503A14290 14,290 .5626 16 121 101 3,05 48 171
2968560 TDS503A14500 14,500 .5709 16 121 101 3,09 48 171
2968561 TDS503A14800 14,800 .5827 16 121 101 3,16 48 171
2968562 TDS503A15000 15,000 .5906 16 121 101 3,20 48 171
2968563 TDS503A15500 15,500 .6102 16 121 101 3,31 48 171
2968564 TDS503A15800 15,800 .6220 16 121 101 3,38 48 171
2968565 TDS503A15870 15,870 .6248 16 121 101 3,39 48 171
2968566 TDS503A16000 16,000 .6299 16 121 101 3,42 48 171
4051302 TDS503A16500 16,500 .6496 18 135 113 3,53 48 185
4051303 TDS503A16670 16,670 .6563 18 135 113 3,57 48 185
4051304 TDS503A16800 16,800 .6614 18 135 113 3,59 48 185
4051305 TDS503A17000 17,000 .6693 18 135 113 3,64 48 185
4051306 TDS503A17500 17,500 .6890 18 135 113 3,75 48 185
4051307 TDS503A17800 17,800 .7008 18 135 113 3,81 48 185
4051308 TDS503A18000 18,000 .7087 18 135 113 3,86 48 185
4051309 TDS503A18500 18,500 .7283 20 148 124 3,97 50 200
4051310 TDS503A18800 18,800 .7402 20 148 124 4,03 50 200
4051311 TDS503A19000 19,000 .7480 20 148 124 4,07 50 200
4051312 TDS503A19050 19,050 .7500 20 148 124 4,09 50 200
4051313 TDS503A19500 19,500 .7677 20 148 124 4,18 50 200
4051314 TDS503A19800 19,800 .7795 20 148 124 4,25 50 200
4051315 TDS503A20000 20,000 .7874 20 148 124 4,29 50 200
WID_Master16_Holemaking_SolidCarbideDrills_T094_T095_Metric_REBRAND.indd 94 10/29/15 1:23 PM
T95
LViWID M 16 H l ki S lidC bid D ill T094 T095 M i REBRANDO b 1520154 06PM
widia.com
Solid Carbide Drills
TOP DRILL S+ • TDS301 • WU25PD
™
• Flood Coolant • Metric
Material
Group
Cutting Speed — vc Recommended Feed Rate (f) by Diameter
Range — m/min
min – max
Tool Diameter
(mm) 3,0 4,0 6,0 8,0 10,0 12,0 16,0 20,0
P
1
80 – 130 mm/r 0,06–0,12 0,10–0,18 0,12–0,24 0,14–0,29 0,17–0,34 0,20–0,39 0,24–0,47 0,31–0,60
2, 3, 4,
6, 7
60 – 120 mm/r 0,07–0,13 0,10–0,19 0,14–0,25 0,17–0,31 0,21–0,37 0,24–0,42 0,29–0,52 0,38–0,65
5, 9, 10,
11
60 – 120 mm/r 0,07–0,13 0,09–0,19 0,13–0,25 0,16–0,31 0,19–0,37 0,21–0,42 0,26–0,52 0,32–0,65
12, 13.1,
13.2
40 – 70 mm/r 0,05–0,08 0,06–0,11 0,09–0,16 0,11–0,20 0,13–0,24 0,15–0,27 0,20–0,35 0,26–0,45
M
14.1
30 – 50 mm/r 0,04–0,07 0,05–0,09 0,08–0,11 0,09–0,12 0,10–0,14 0,12–0,16 0,14–0,18 0,16–0,20
14.3
30 – 60 mm/r 0,04–0,08 0,06–0,10 0,08–0,12 0,09–0,14 0,10–0,16 0,12–0,18 0,14–0,20 0,16–0,22
14.2,
14.4
30 – 50 mm/r 0,04–0,07 0,06–0,09 0,08–0,11 0,09–0,12 0,10–0,14 0,12–0,16 0,14–0,18 0,16–0,20
K
15, 16
100 – 210 mm/r 0,08–0,16 0,12–0,24 0,16–0,31 0,20–0,38 0,23–0,44 0,25–0,49 0,31–0,06 0,38–0,74
17, 18,
19
130 – 160 mm/r 0,08–0,13 0,12–0,19 0,16–0,25 0,20–0,31 0,23–0,36 0,25–0,40 0,31–0,48 0,38–0,60
20
100 – 170 mm/r 0,06–0,13 0,09–0,19 0,12–0,25 0,14–0,30 0,17–0,35 0,19–0,40 0,25–0,48 0,30–0,60
N
21
100 – 300 mm/r 0,10–0,18 0,12–0,20 0,15–0,25 0,20–0,30 0,25–0,35 0,30–0,40 0,35–0,50 0,40–0,60
22, 23,
24
100 – 300 mm/r 0,10–0,20 0,12–0,25 0,15–0,30 0,20–0,35 0,25–0,40 0,30–0,45 0,35–0,55 0,40–0,65
25
100 – 300 mm/r 0,15–0,18 0,16–0,20 0,18–0,25 0,20–0,30 0,25–0,35 0,30–0,40 0,35–0,50 0,40–0,55
26, 27,
28
100 – 250 mm/r 0,10–0,20 0,12–0,25 0,15–0,30 0,20–0,35 0,25–0,40 0,30–0,45 0,35–0,50 0,40–0,60
S
31, 32
20 – 30 mm/r 0,03–0,06 0,04–0,08 0,06–0,10 0,08–0,12 0,09–0,13 0,10–0,14 0,12–0,16 0,14–0,18
33, 34,
35
10 – 30 mm/r 0,02–0,04 0,03–0,06 0,05–0,08 0,07–0,10 0,08–0,11 0,09–0,12 0,10–0,14 0,11–0,16
36
20 – 40 mm/r 0,02–0,04 0,02–0,05 0,04–0,07 0,06–0,09 0,07–0,10 0,08–0,11 0,09–0,13 0,10–0,15
37
20 – 50 mm/r 0,02–0,04 0,03–0,06 0,05–0,08 0,07–0,10 0,08–0,11 0,09–0,12 0,10–0,14 0,11–0,16
Solid Carbide Drills
Application Data • TOP DRILL S+™ • TDS301
Metric
tolerance
nominal size range D1 tolerance D tolerance h6
>3–6 0,004/0,016 0,000/–0,008
>6–10 0,006/0,021 0,000/–0,009
>10–18 0,007/0,025 0,000/–0,011
>18–21 0,008/0,029 0,000/–0,013
WID_Master16_Holemaking_SolidCarbideDrills_T094_T095_Metric_REBRAND.indd 95 10/29/15 1:23 PM
T96
LViWID M 16 H l ki S lidC bid D ill T096 T097 M i REBRANDN b 12 20159 34AM
widia.com
Solid Carbide Drills
Application Data • TOP DRILL S+™ • TDS501 TDS502 TDS503
Solid Carbide Drills
TOP DRILL S+ • TDS501 TDS502 TDS503 • WU25PD
™
• Through Coolant • Metric
Material
Group
Cutting Speed — vc Recommended Feed Rate (f) by Diameter
Range — m/min
min – max
Tool Diameter
(mm) 3,0 4,0 6,0 8,0 10,0 12,0 16,0 20,0
P
1
90 – 180 mm/r 0,08–0,16 0,09–0,18 0,12–0,24 0,14–0,29 0,17–0,34 0,20–0,39 0,24–0,47 0,31–0,60
2, 3, 4,
6, 7
80 – 120 mm/r 0,09–0,17 0,10–0,19 0,14–0,25 0,17–0,31 0,21–0,37 0,24–0,42 0,29–0,52 0,38–0,65
5, 9, 10,
11
70 – 120 mm/r 0,08–0,17 0,09–0,19 0,13–0,25 0,16–0,31 0,19–0,37 0,21–0,42 0,26–0,52 0,32–0,65
12, 13.1,
13.2
50 – 80 mm/r 0,05–0,09 0,06–0,11 0,09–0,16 0,11–0,20 0,14–0,24 0,15–0,27 0,20–0,35 0,26–0,45
M
14.1
30 – 50 mm/r 0,04–0,07 0,05–0,09 0,08–0,11 0,09–0,12 0,10–0,14 0,12–0,16 0,14–0,18 0,16–0,20
14.3
30 – 60 mm/r 0,04–0,08 0,06–0,10 0,08–0,12 0,09–0,14 0,10–0,16 0,12–0,18 0,14–0,20 0,16–0,22
14.2,
14.4
30 – 50 mm/r 0,04–0,07 0,06–0,09 0,08–0,11 0,09–0,12 0,10–0,14 0,12–0,16 0,14–0,18 0,16–0,20
K
15, 16
100 – 210 mm/r 0,11–0,22 0,12–0,24 0,16–0,31 0,20–0,38 0,23–0,44 0,25–0,49 0,31–0,60 0,38–0,74
17, 18,
19
130 – 160 mm/r 0,11–0,17 0,12–0,19 0,16–0,25 0,20–0,31 0,23–0,36 0,25–0,40 0,31–0,48 0,38–0,60
20
100 – 170 mm/r 0,08–0,17 0,09–0,19 0,12–0,25 0,14–0,30 0,17–0,35 0,19–0,40 0,24–0,48 0,30–0,60
N
21
100 – 350 mm/r 0,10–0,18 0,12–0,20 0,15–0,25 0,20–0,30 0,25–0,35 0,30–0,40 0,35–0,50 0,40–0,60
22, 23,
24
100 – 300 mm/r 0,10–0,20 0,12–0,25 0,15–0,30 0,20–0,35 0,25–0,40 0,30–0,45 0,35–0,55 0,40–0,65
25
100 – 300 mm/r 0,15–0,18 0,16–0,20 0,18–0,25 0,20–0,30 0,25–0,35 0,30–0,40 0,35–0,50 0,40–0,55
26, 27,
28
100 – 250 mm/r 0,10–0,20 0,12–0,25 0,15–0,30 0,20–0,35 0,25–0,40 0,30–0,45 0,35–0,50 0,40–0,60
S
31, 32
20 – 30 mm/r 0,03–0,06 0,04–0,08 0,06–0,10 0,08–0,12 0,09–0,13 0,10–0,14 0,12–0,16 0,14–0,18
33, 34,
35
10 – 30 mm/r 0,02–0,04 0,03–0,06 0,05–0,08 0,07–0,10 0,08–0,11 0,09–0,12 0,10–0,14 0,11–0,16
36
20 – 40 mm/r 0,02–0,04 0,02–0,05 0,04–0,07 0,06–0,09 0,07–0,10 0,08–0,11 0,09–0,13 0,10–0,15
37
20 – 50 mm/r 0,02–0,04 0,03–0,06 0,05–0,08 0,07–0,10 0,08–0,11 0,09–0,12 0,10–0,14 0,11–0,16
Metric
tolerance
nominal size range D1 tolerance D tolerance h6
>3–6 0,004/0,016 0,000/–0,008
>6–10 0,006/0,021 0,000/–0,009
>10–18 0,007/0,025 0,000/–0,011
>18–21 0,008/0,029 0,000/–0,013
WID_Master16_Holemaking_SolidCarbideDrills_T096_T097_Metric_REBRAND.indd 96 11/20/15 3:07 PM
LViWID M 16 H l ki S lidC bid D ill T096 T097 M i REBRANDN b 1220159 34AM
We pay cash for used carbide tooling, including coated or non-coated carbide inserts,
drills, end mills, reamers, and taps, regardless of brand.
It’s good for the environment and a responsible way to dispose of scrap carbide.
Our carbide recycling program features:
• Easy-to-use web portal that shows what your scrap carbide is worth before sending it to us.
• Online forms that make it easy to ship scrap carbide to WIDIA.
• Green Box™ containers for safe, convenient shipping of scrap carbide to WIDIA.
• Cash payment for used carbide tooling.
Carbide Recycling
Good for You, Better for the Environment!
The WIDIA™ Carbide Recycling Program can turn accumulated
scrap carbide tooling in your shop into cash.
For more information, contact your local WIDIA
Authorised Distributor or visit widia.com/services.
WID_Master16_Holemaking_SolidCarbideDrills_T096_T097_Metric_REBRAND.indd 97 11/20/15 3:07 PM
T98
LViWID M 16 H l ki S lidC bid D ill T098 T099 M i REBRANDN b 12 20159 36AM
widia.com
TDS+ 12 x D is capable of drilling an array of materials. The 4-margin land confi guration
offers stability, minimises chipping and jamming, and promotes chip evacuation.
Because TDS+ 12 x D does not require a pilot drill, it increases effi ciency by reducing
the number of steps required for basic applications.
• 12 x D fi ts the gap between 8 x D and 15 x D.
• One drill that covers all materials.
• Can be used without a pilot.
Extra stability
The TDS+ 4-margin land design from head to end of
fl ute provides stability in cross holes and inclined exits.
Easy chip evacuation
The TDS+ utilises the same technology developed
for WIDIA deep-hole drills. The polished surface
enables effective chip evacuation from deep holes.
Minimised chip jamming
Special gash and fl ute form for effective
chip formation across a variety of materials.
Excellent centring
capability
TOP DRILL S+ 12 x D
The versatile TOP DRILL S+ provides reliable performance across a broad
scope of applications, including alloyed and unalloyed steel, cast iron, and
some stainless steels and high-temperature alloys. TDS+ is now available
in 12 x D, adding to its already wide range of options from 3–8 x D.
Deep-Hole Drilling without Piloting •
WIDIA™ TOP DRILL S+™ 12 x D
WID_Master16_Holemaking_SolidCarbideDrills_T098_T099_Metric_REBRAND.indd 98 11/12/15 12:02 PM
T99
LViWID M 16 H l ki S lidC bid D ill T098 T099 M i REBRANDN b 1220159 36AM
widia.com
• Excellent centring capability — the new TDS+ 12 x D point
is engineered to provide excellent centring capability.
• No pilot drill required — save time and money by reducing
the number of steps required for your 12 x D application.
• Minimised runout — cylindrical body design provides guidance,
and precision h6 shank is standard for better runout and less breakage.
• New WU20PD™ grade — designed specifically for long tool life.
• Factory regrind service — available through your WIDIA™
reconditioning service.
• Lower cost-per-hole due to high MRR and long tool life.
• Consistent performance from internally controlled supply chain:
Powder > Rod > Grinding > Coating
• Part of the complete WIDIA holemaking solution.
• Get more predictable results from local regrind services using
OEM standards to recondition, ensuring value throughout
the entire life of the drill.
• Broad range of standard lengths, diameters, and coolant options
in one line. Includes extensive intermediate metric, inch, fraction,
and wire size, including tap drill sizes.
Improved Productivity
Increased Tool Life
WIDIA Advantage
WID_Master16_Holemaking_SolidCarbideDrills_T098_T099_Metric_REBRAND.indd 99 11/12/15 12:02 PM
T100
LViWID M 16 H l ki S lidC bid D ill T100 T101 M i REBRANDN b 12 20159 37AM
widia.com
Solid Carbide Drills
TOP DRILL S+™ Long-Length Drills with Through Coolant • Steel, Stainless Steel, and Cast Iron
TDS504A • 12 x D
TDS504A • WU20PD
D1 diameter
grade WU20PD
TiAlN
order # catalogue # mm in L L4 max L3 L5 LS D
4173459 TDS504A03000 3,000 .1181 93 44 52,0 0,6 36 6
4173460 TDS504A03175 3,175 .1250 93 44 52,0 0,7 36 6
4173461 TDS504A03264 3,264 .1285 93 44 53,0 0,7 36 6
4173545 TDS504A03455 3,455 .1360 93 44 53,0 0,7 36 6
4173462 TDS504A03500 3,500 .1378 93 44 53,0 0,7 36 6
4173546 TDS504A03734 3,734 .1470 93 45 54,0 0,8 36 6
4173463 TDS504A03970 3,970 .1563 107 56 66,0 0,8 36 6
4173464 TDS504A04000 4,000 .1575 107 56 66,0 0,8 36 6
4173465 TDS504A04500 4,500 .1772 107 56 67,0 0,9 36 6
4173466 TDS504A04600 4,600 .1811 107 57 68,0 1,0 36 6
4173467 TDS504A04763 4,763 .1875 125 69 82,0 1,0 36 6
4173468 TDS504A04800 4,800 .1890 125 69 82,0 1,0 36 6
4173469 TDS504A05000 5,000 .1969 125 70 83,0 1,1 36 6
4173470 TDS504A05100 5,100 .2008 125 70 83,0 1,1 36 6
4173471 TDS504A05200 5,200 .2047 125 70 83,0 1,1 36 6
4173472 TDS504A05300 5,300 .2087 125 71 84,0 1,1 36 6
4173473 TDS504A05410 5,410 .2130 125 71 84,0 1,1 36 6
4173474 TDS504A05500 5,500 .2165 125 71 84,0 1,2 36 6
4173475 TDS504A05558 5,558 .2188 125 71 84,0 1,2 36 6
4173476 TDS504A05600 5,600 .2205 125 72 85,0 1,2 36 6
4173477 TDS504A05700 5,700 .2244 125 72 85,0 1,2 36 6
4173478 TDS504A05800 5,800 .2283 125 71 85,0 1,2 36 6
4173479 TDS504A06000 6,000 .2362 125 72 86,0 1,3 36 6
4173480 TDS504A06200 6,200 .2441 139 82 97,0 1,3 36 8
rst choice
alternate choice
For information on L, L3, and L4 max, see page T143.
Solid Carbide Drills
(continued)
WID_Master16_Holemaking_SolidCarbideDrills_T100_T101_Metric_REBRAND.indd 100 11/12/15 12:02 PM
T101
LViWID M 16 H l ki S lidC bid D ill T100 T101 M i REBRANDN b 1220159 37AM
widia.com
TDS504A • WU20PD
D1 diameter
grade WU20PD
TiAlN
order # catalogue # mm in L L4 max L3 L5 LS D
4173481 TDS504A06350 6,350 .2500 139 83 98,0 1,3 36 8
4173482 TDS504A06500 6,500 .2559 139 83 98,0 1,4 36 8
4173483 TDS504A06528 6,528 .2570 139 83 98,0 1,4 36 8
4173484 TDS504A06600 6,600 .2598 139 84 99,0 1,4 36 8
4173485 TDS504A06746 6,746 .2656 139 83 99,0 1,4 36 8
4173486 TDS504A06800 6,800 .2677 139 83 99,0 1,4 36 8
4173487 TDS504A06909 6,909 .2720 139 84 100,0 1,5 36 8
4173488 TDS504A07000 7,000 .2756 139 84 100,0 1,5 36 8
4173489 TDS504A07145 7,145 .2813 153 94 111,0 1,5 36 8
4173490 TDS504A07500 7,500 .2953 153 95 112,0 1,6 36 8
4173491 TDS504A07541 7,541 .2969 153 95 112,0 1,6 36 8
4173492 TDS504A07700 7,700 .3031 153 96 113,0 1,6 36 8
4173493 TDS504A07800 7,800 .3071 153 95 113,0 1,7 36 8
4173494 TDS504A07938 7,938 .3125 153 96 114,0 1,7 36 8
4173495 TDS504A08000 8,000 .3150 153 96 114,0 1,7 36 8
4173496 TDS504A08100 8,100 .3189 185 116 136,0 1,7 40 10
4173497 TDS504A08334 8,334 .3281 185 117 137,0 1,8 40 10
4173498 TDS504A08433 8,433 .3320 185 117 137,0 1,8 40 10
4173499 TDS504A08500 8,500 .3346 185 117 137,0 1,8 40 10
4173500 TDS504A08700 8,700 .3425 185 118 138,0 1,9 40 10
4173501 TDS504A08733 8,733 .3438 185 117 138,0 1,9 40 10
4173502 TDS504A09000 9,000 .3543 185 118 139,0 1,9 40 10
4173503 TDS504A09100 9,100 .3583 185 118 139,0 1,9 40 10
4173504 TDS504A09129 9,129 .3594 185 118 139,0 1,9 40 10
4173547 TDS504A09347 9,347 .3680 185 119 140,0 2,0 40 10
4173505 TDS504A09500 9,500 .3740 185 119 140,0 2,0 40 10
4173506 TDS504A09525 9,525 .3750 185 119 140,0 2,0 40 10
4173507 TDS504A09921 9,921 .3906 185 120 142,0 2,1 40 10
4173508 TDS504A10000 10,000 .3937 185 120 142,0 2,1 40 10
4173509 TDS504A10200 10,200 .4016 218 140 164,0 2,2 45 12
4173510 TDS504A10300 10,300 .4055 218 141 165,0 2,2 45 12
4173511 TDS504A10320 10,320 .4063 218 141 165,0 2,2 45 12
4173512 TDS504A10500 10,500 .4134 218 141 165,0 2,2 45 12
4173513 TDS504A10716 10,716 .4219 218 142 166,0 2,3 45 12
4173514 TDS504A10800 10,800 .4252 218 141 166,0 2,3 45 12
4173515 TDS504A11000 11,000 .4331 218 142 167,0 2,4 45 12
4173516 TDS504A11113 11,113 .4375 218 142 167,0 2,4 45 12
4173517 TDS504A11500 11,500 .4528 218 143 168,0 2,5 45 12
4173518 TDS504A11800 11,800 .4646 218 143 169,0 2,5 45 12
4173519 TDS504A12000 12,000 .4724 218 144 170,0 2,6 45 12
Solid Carbide Drills
(continued)
(TDS504A • 12 x D — continued)
Solid Carbide Drills
TOP DRILL S+™ Long-Length Drills with Through Coolant • Steel, Stainless Steel, and Cast Iron
rst choice
alternate choice
WID_Master16_Holemaking_SolidCarbideDrills_T100_T101_Metric_REBRAND.indd 101 11/12/15 12:02 PM
T102
LViWID M 16 H l ki S lidC bid D ill T102 T103 M i REBRANDN b 12 20159 38AM
widia.com
(TDS504A • 12 x D — continued)
Solid Carbide Drills
TOP DRILL S+™ Long-Length Drills with Through Coolant • Steel, Stainless Steel, and Cast Iron
rst choice
alternate choice
Solid Carbide Drills
TDS504A • WU20PD
D1 diameter
grade WU20PD
TiAlN
order # catalogue # mm in L L4 max L3 L5 LS D
4173520 TDS504A12100 12,100 .4764 246 164 192,0 2,6 45 14
4173521 TDS504A12304 12,304 .4844 246 165 193,0 2,6 45 14
4148906 TDS504A12500 12,500 .4921 246 165 193,0 2,7 45 14
4173522 TDS504A12700 12,700 .5000 246 166 194,0 2,7 45 14
4173523 TDS504A13000 13,000 .5118 246 166 195,0 2,8 45 14
4173524 TDS504A13100 13,100 .5157 246 166 195,0 2,8 45 14
4173525 TDS504A13500 13,500 .5315 246 167 196,0 2,9 45 14
4173526 TDS504A14000 14,000 .5512 246 168 198,0 3,0 45 14
4173527 TDS504A14100 14,100 .5551 277 188 220,0 3,0 48 16
4173528 TDS504A14288 14,288 .5625 277 188 220,0 3,1 48 16
4173529 TDS504A14500 14,500 .5709 277 189 221,0 3,1 48 16
4173530 TDS504A14684 14,684 .5781 277 190 222,0 3,2 48 16
4173531 TDS504A15000 15,000 .5906 277 190 223,0 3,2 48 16
4173532 TDS504A15500 15,500 .6102 277 191 224,0 3,3 48 16
4173533 TDS504A15875 15,875 .6250 277 192 225,0 3,4 48 16
4173534 TDS504A16000 16,000 .6299 277 192 226,0 3,4 48 16
4173535 TDS504A16500 16,500 .6496 305 213 249,0 3,6 48 18
4173536 TDS504A17000 17,000 .6693 305 214 250,0 3,7 48 18
4173537 TDS504A17463 17,463 .6875 305 215 252,0 3,8 48 18
4173538 TDS504A17500 17,500 .6890 305 215 252,0 3,8 48 18
4173539 TDS504A18000 18,000 .7087 305 216 253,0 3,9 48 18
4173540 TDS504A18500 18,500 .7283 334 237 277,0 4,0 50 20
4173541 TDS504A19000 19,000 .7480 334 238 278,0 4,1 50 20
4173542 TDS504A19050 19,050 .7500 334 239 279,0 4,1 50 20
4173543 TDS504A19500 19,500 .7677 334 239 280,0 4,2 50 20
4173544 TDS504A20000 20,000 .7874 334 240 281,0 4,3 50 20
WID_Master16_Holemaking_SolidCarbideDrills_T102_T103_Metric_REBRAND.indd 102 11/12/15 12:02 PM
T103
LViWID M 16 H l ki S lidC bid D ill T102 T103 M i REBRANDN b 1220159 38AM
widia.com
Solid Carbide Drills
Application Data • TOP DRILL S+™ • Four-Margin Deep-Hole Drills with
Through Coolant • Steel and Cast Iron Materials
Solid Carbide Drills
TOP DRILL S+ • TDS504 • WU20PD
™
• Through Coolant • Metric
Material
Group
Cutting Speed
— vc Recommended Feed Rate (f) by Diameter
Range — m/min
min – max
Tool Diameter
(mm) 3,0 4,0 6,0 8,0 10,0 12,0 16,0 20,0
P
1
90 – 180 mm/r 0,08–0,16 0,09–0,18 0,12–0,24 0,14–0,29 0,17–0,34 0,20–0,39 0,24–0,47 0,31–0,60
2, 3, 4,
6, 7
80 – 120 mm/r 0,09–0,17 0,10–0,19 0,14–0,25 0,17–0,31 0,21–0,37 0,24–0,42 0,29–0,52 0,38–0,65
5, 9,
10, 11
70 – 120 mm/r 0,08–0,17 0,09–0,19 0,13–0,25 0,16–0,31 0,19–0,37 0,21–0,42 0,26–0,52 0,32–0,65
12, 13
50 – 80 mm/r 0,05–0,09 0,06–0,11 0,09–0,16 0,11–0,20 0,14–0,24 0,15–0,27 0,20–0,35 0,26–0,45
M
14,1
30 – 50 mm/r 0,04–0,07 0,05–0,09 0,08–0,11 0,09–0,12 0,10–0,14 0,12–0,16 0,14–0,18 0,16–0,20
14,3
30 – 60 mm/r 0,04–0,08 0,06–0,10 0,08–0,12 0,09–0,14 0,10–0,16 0,12–0,18 0,14–0,20 0,16–0,22
14.2,
14.4
30 – 50 mm/r 0,04–0,07 0,06–0,09 0,08–0,11 0,09–0,12 0,10–0,14 0,12–0,16 0,14–0,18 0,16–0,20
K
15, 16
100 – 210 mm/r 0,11–0,22 0,12–0,24 0,16–0,31 0,20–0,38 0,23–0,44 0,25–0,49 0,31–0,60 0,38–0,74
17, 18,
19
130 – 160 mm/r 0,11–0,17 0,12–0,19 0,16–0,25 0,20–0,31 0,23–0,36 0,25–0,40 0,31–0,48 0,38–0,60
20
100 – 170 mm/r 0,08–0,17 0,09–0,19 0,12–0,25 0,14–0,30 0,17–0,35 0,19–0,40 0,24–0,48 0,30–0,60
Metric
tolerance
nominal size range D1 tolerance m7 D tolerance h6
>3–6 0,004/0,016 0,000/-0,008
>6–10 0,006/0,021 0,000/-0,009
>10–18 0,007/0,025 0,000/-0,011
>18–25,4 0,008/0,029 0,000/-0,013
WID_Master16_Holemaking_SolidCarbideDrills_T102_T103_Metric_REBRAND.indd 103 11/12/15 12:02 PM
T104
LViWID M 16 H l ki S lidC bid D ill T104 T105 M i REBRANDN b 12 20159 40AM
widia.com
132° TDS Point Geometry
• Low thrust.
• Excellent centring capabilities.
• Easy to regrind.
Four-Margin Lands
• Improves hole straightness.
• Improves hole alignment when drilling
through cross holes and inclined exits.
30° Helix with Optimised Flute Profi le
• Reduces risk of chip jamming and
catastrophic failure.
Solid carbide deep-hole drills outperform gun drills and HSS deep-hole drills in deep-hole
applications up to 30 x D by increasing metal removal rates by 3–4 times. Increased MRR
equals bottom-line savings to customers in throughput, machine time, and personnel hours.
The TDD1*Z* Series in the WU20PD™ grade offers secure and consistent performance, excellent
hole quality, and reduced cycle times. The standard lines are available from 3 to 13mm and lengths
of 15, 20, 25, and 30 x D. It eliminates the traditional HSS or gun drilling without pecking, at up to
100% increased penetration rates.
Top Drill Deep-Hole Drills
Superior Deep-Hole Drilling •
WIDIA™ TOP DRILL™ Deep-Hole Drills for Steel and Cast Iron
WID_Master16_Holemaking_SolidCarbideDrills_T104_T105_Metric_REBRAND.indd 104 11/12/15 12:02 PM
T105
LViWID M 16 H l ki S lidC bid D ill T104 T105 M i REBRANDN b 1220159 40AM
widia.com
WU20PD™ Grade
• Advanced TiAlN multilayer PVD coating for steel and cast iron.
• Ultra fi ne-grain carbide ensures process reliability at high feed rates.
Customisation
• Intermediate sizes, even up to 16mm diameter, available as semi-standards.
• Length variations, including longer versions up to 550mm,
available as custom solutions.
• For drilling non-ferrous and uncoated materials, sharp versions
are recommended and available as custom solutions.
• Excellent surface fi nish and concentricity.
Highly Polished Surfaces
• Reduction of friction in the chip fl ute and on the lands,
resulting in superior chip evacuation.
• Shorter drilling time through omission of reversing cycles.
WID_Master16_Holemaking_SolidCarbideDrills_T104_T105_Metric_REBRAND.indd 105 11/12/15 12:02 PM
T106
LViWID M 16 H l ki S lidC bid D ill T106 T107 M i REBRANDO b 15 20154 10PM
widia.com
WU20PD
(continued)
Solid Carbide Drills
Deep-Hole Drills with Through Coolant • Steel and Cast Iron • 15 x D
Deep Hole Drills for Steel and Cast Iron • 2 Flute • WU20PD
™
• 15 x D • Z Shank
D1 diameter
grade WU20PD
TiAlN
order # catalogue # mm in D L3 L4 max L5 LS L
pilot
drill
3899626 TDD105Z03000 3,000 .1181 3 53 45 0,6 30 86 TDS501A03000
3899627 TDD105Z03175 3,175 .1250 4 67 58 0,6 32 105 TDS501A03175
3899628 TDD105Z03500 3,500 .1378 4 68 59 0,7 32 105 TDS501A03500
3899629 TDD105Z03571 3,571 .1406 4 68 59 0,7 32 105 TDS501A03571
3899630 TDD105Z03800 3,800 .1496 4 69 60 0,8 32 105 TDS501A03800
3899631 TDD105Z03970 3,970 .1563 4 70 60 0,8 32 105 TDS501A03970
3899632 TDD105Z04000 4,000 .1575 4 70 60 0,8 32 105 TDS501A04000
3899683 TDD105Z04039 4,039 .1590 5 84 73 0,8 34 124 TDS501A04039
3899684 TDD105Z04300 4,300 .1693 5 85 74 0,9 34 124 TDS501A04300
3899685 TDD105Z04500 4,500 .1772 5 85 74 0,9 34 124 TDS501A04500
3899686 TDD105Z04623 4,623 .1820 5 86 74 1,0 34 124 TDS501A04623
3899687 TDD105Z04763 4,763 .1875 5 86 75 1,0 34 124 TDS501A04763
3899688 TDD105Z05000 5,000 .1969 5 87 75 1,0 34 124 TDS501A05000
3899689 TDD105Z05159 5,159 .2031 6 102 88 1,1 36 143 TDS501A05160
3899690 TDD105Z05410 5,410 .2130 6 102 89 1,1 36 143 TDS501A05410
3899691 TDD105Z05500 5,500 .2165 6 102 89 1,1 36 143 TDS501A05500
3899692 TDD105Z05558 5,558 .2188 6 102 89 1,2 36 143 TDS501A05558
3899693 TDD105Z05800 5,800 .2283 6 103 90 1,2 36 143 TDS501A05800
3899694 TDD105Z06000 6,000 .2362 6 104 90 1,2 36 143 TDS501A06000
3899695 TDD105Z06200 6,200 .2441 7 118 103 1,3 38 162 TDS501A06200
3899696 TDD105Z06350 6,350 .2500 7 119 104 1,3 38 162 TDS501A06350
3899697 TDD105Z06500 6,500 .2559 7 119 104 1,4 38 162 TDS501A06500
3899698 TDD105Z06528 6,528 .2570 7 119 104 1,4 38 162 TDS501A06528
3899699 TDD105Z06746 6,746 .2656 7 120 105 1,4 38 162 TDS501A06746
Solid Carbide Drills
rst choice
alternate choice
WID_Master16_Holemaking_SolidCarbideDrills_T106_T107_Metric_REBRAND.indd 106 10/29/15 1:23 PM
T107
LViWID M 16 H l ki S lidC bid D ill T106 T107 M i REBRANDO b 1520154 10PM
widia.com
WU20PD
Solid Carbide Drills
Deep-Hole Drills with Through Coolant • Steel and Cast Iron • 15 x D
D1 diameter
grade WU20PD
TiAlN
order # catalogue # mm in D L3 L4 max L5 LS L
pilot
drill
3899700 TDD105Z06800 6,800 .2677 7 120 105 1,4 38 162 TDS501A06800
3899701 TDD105Z06909 6,909 .2720 7 121 105 1,4 38 162 TDS501A06909
3899702 TDD105Z07000 7,000 .2756 7 121 105 1,5 38 162 TDS501A07000
3900612 TDD105Z07145 7,145 .2813 8 135 118 1,5 40 181 TDS501A07145
3900633 TDD105Z07500 7,500 .2953 8 136 119 1,6 40 181 TDS501A07500
3899764 TDD106Z07500 7,500 .2953 8 174 157 1,6 40 221 TDS501A07500
3900634 TDD105Z07541 7,541 .2969 8 136 119 1,6 40 181 TDS501A07541
3900635 TDD105Z07938 7,938 .3125 8 138 120 1,7 40 181 TDS501A07938
3900636 TDD105Z08000 8,000 .3150 8 138 120 1,7 40 181 TDS501A08000
3900637 TDD105Z08334 8,334 .3281 9 153 134 1,8 42 200 TDS501A08334
3900638 TDD105Z08433 8,433 .3320 9 153 134 1,8 42 200 TDS501A08433
3900639 TDD105Z08500 8,500 .3346 9 153 134 1,8 42 200 TDS501A08500
3900640 TDD105Z08733 8,733 .3438 9 154 135 1,8 42 200 TDS501A08733
3900641 TDD105Z09000 9,000 .3543 9 155 135 1,9 42 200 TDS501A09000
3900642 TDD105Z09347 9,347 .3680 10 170 149 2,0 44 219 TDS501A09347
3900643 TDD105Z09500 9,500 .3740 10 170 149 2,0 44 219 TDS501A09500
3900644 TDD105Z09525 9,525 .3750 10 170 149 2,0 44 219 TDS501A09525
3900645 TDD105Z09750 9,750 .3839 10 171 150 2,1 44 219 TDS501A09750
3900647 TDD105Z10000 10,000 .3937 10 172 150 2,1 44 219 TDS501A10000
3900648 TDD105Z10200 10,200 .4016 11 186 163 2,2 46 238 TDS501A10200
3900649 TDD105Z10320 10,317 .4062 11 187 164 2,2 46 238 TDS501A10317
3900650 TDD105Z10500 10,500 .4134 11 187 164 2,2 46 238 TDS501A10500
3900651 TDD105Z10716 10,716 .4219 11 188 164 2,3 46 238 TDS501A10716
3900652 TDD105Z11000 11,000 .4331 11 203 178 2,3 46 238 TDS501A11000
3900653 TDD105Z11113 11,113 .4375 12 203 178 2,4 48 257 TDS501A11113
3900654 TDD105Z11500 11,500 .4528 12 204 179 2,4 48 257 TDS501A11500
3900656 TDD105Z12000 12,000 .4724 12 206 180 2,5 48 257 TDS501A12000
3900657 TDD105Z12304 12,304 .4844 13 221 194 2,6 50 276 TDS501A12304
3900658 TDD105Z12500 12,500 .4921 13 221 194 2,7 50 276 TDS501A12500
3900659 TDD105Z12700 12,700 .5000 13 222 194 2,7 50 276 TDS501A12700
3900660 TDD105Z13000 13,000 .5118 13 223 195 2,8 50 276 TDS501A13000
Solid Carbide Drills
rst choice
alternate choice
(Deep-Hole Drills for Steel and Cast Iron • 2 Flute • WU20PD
™
• 15 x D • Z Shank — continued)
WID_Master16_Holemaking_SolidCarbideDrills_T106_T107_Metric_REBRAND.indd 107 10/29/15 1:23 PM
T108
LViWID M 16 H l ki S lidC bid D ill T108 T109 M i REBRANDO b 15 20154 10PM
widia.com
WU20PD
(continued)
Solid Carbide Drills
Deep-Hole Drills with Through Coolant • Steel and Cast Iron • 20 x D
Deep-Hole Drills for Steel and Cast Iron • 2 Flute • WU20PD
™
• 20 x D • Z Shank
D1 diameter
grade WU20PD
TiAlN
order # catalogue # mm in D L3 L4 max L5 LS L
pilot
drill
3899782 TDD106Z03000 3,000 .1181 3 68 60 0,6 30 101 TDS501A03000
3899803 TDD106Z03175 3,175 .1250 4 83 74 0,6 32 125 TDS501A03175
3899804 TDD106Z03500 3,500 .1378 4 86 77 0,7 32 125 TDS501A03500
3899805 TDD106Z03571 3,571 .1406 4 86 77 0,7 32 125 TDS501A03571
3899806 TDD106Z03800 3,800 .1496 4 88 79 0,8 32 125 TDS501A03800
3899807 TDD106Z03970 3,970 .1563 4 89 80 0,8 32 125 TDS501A03970
3899808 TDD106Z04000 4,000 .1575 4 90 80 0,8 32 125 TDS501A04000
3899809 TDD106Z04039 4,039 .1590 5 104 93 0,8 34 149 TDS501A04039
3899810 TDD106Z04300 4,300 .1693 5 106 95 0,9 34 149 TDS501A04300
3899811 TDD106Z04500 4,500 .1772 5 108 97 0,9 34 149 TDS501A04500
3899812 TDD106Z04623 4,623 .1820 5 109 97 1,0 34 149 TDS501A04623
3899813 TDD106Z04763 4,763 .1875 5 110 98 1,0 34 149 TDS501A04763
3899814 TDD106Z05000 5,000 .1969 5 112 100 1,0 34 149 TDS501A05000
3899815 TDD106Z05159 5,159 .2031 6 128 114 1,1 36 173 TDS501A05160
3899816 TDD106Z05410 5,410 .2130 6 129 116 1,1 36 173 TDS501A05410
3899818 TDD106Z05500 5,500 .2165 6 130 117 1,1 36 173 TDS501A05500
3899819 TDD106Z05558 5,558 .2188 6 130 117 1,2 36 173 TDS501A05558
3899820 TDD106Z05800 5,800 .2283 6 132 119 1,2 36 173 TDS501A05800
3899821 TDD106Z06000 6,000 .2362 6 134 120 1,2 36 173 TDS501A06000
3899822 TDD106Z06200 6,200 .2441 7 149 134 1,3 38 197 TDS501A06200
3899823 TDD106Z06350 6,350 .2500 7 151 136 1,3 38 197 TDS501A06350
3899824 TDD106Z06500 6,500 .2559 7 152 137 1,4 38 197 TDS501A06500
3899825 TDD106Z06528 6,528 .2570 7 152 137 1,4 38 197 TDS501A06528
3899826 TDD106Z06746 6,746 .2656 7 154 138 1,4 38 197 TDS501A06746
Solid Carbide Drills
rst choice
alternate choice
WID_Master16_Holemaking_SolidCarbideDrills_T108_T109_Metric_REBRAND.indd 108 10/29/15 1:23 PM
T109
LViWID M 16 H l ki S lidC bid D ill T108 T109 M i REBRANDO b 1520154 10PM
widia.com
WU20PD
Solid Carbide Drills
Deep-Hole Drills with Through Coolant • Steel and Cast Iron • 20 x D
D1 diameter
grade WU20PD
TiAlN
order # catalogue # mm in D L3 L4 max L5 LS L
pilot
drill
3899827 TDD106Z06800 6,800 .2677 7 154 139 1,4 38 197 TDS501A06800
3899828 TDD106Z06909 6,909 .2720 7 155 139 1,4 38 197 TDS501A06909
3899829 TDD106Z07000 7,000 .2756 7 156 140 1,5 38 197 TDS501A07000
3899763 TDD106Z07145 7,145 .2813 8 171 154 1,5 40 221 TDS501A07145
3899765 TDD106Z07541 7,541 .2969 8 174 157 1,6 40 221 TDS501A07541
3899766 TDD106Z07938 7,938 .3125 8 177 160 1,7 40 221 TDS501A07938
3899767 TDD106Z08000 8,000 .3150 8 178 160 1,7 40 221 TDS501A08000
3899768 TDD106Z08334 8,334 .3281 9 195 175 1,8 42 245 TDS501A08334
3899769 TDD106Z08433 8,433 .3320 9 195 176 1,8 42 245 TDS501A08433
3899770 TDD106Z08500 8,500 .3346 9 196 177 1,8 42 245 TDS501A08500
3899771 TDD106Z08733 8,733 .3438 9 198 178 1,8 42 245 TDS501A08733
3899772 TDD106Z09000 9,000 .3543 9 200 180 1,9 42 245 TDS501A09000
3899783 TDD106Z09347 9,347 .3680 10 217 195 2,0 44 269 TDS501A09347
3899784 TDD106Z09500 9,500 .3740 10 218 197 2,0 44 269 TDS501A09500
3899785 TDD106Z09525 9,525 .3750 10 218 197 2,0 44 269 TDS501A09525
3899786 TDD106Z09750 9,750 .3839 10 220 198 2,1 44 269 TDS501A09750
3899787 TDD106Z09921 9,921 .3906 10 221 199 2,1 44 269 TDS501A09921
3899788 TDD106Z10000 10,000 .3937 10 222 200 2,1 44 269 TDS501A10000
3899789 TDD106Z10200 10,200 .4016 11 237 214 2,2 46 293 TDS501A10200
3899790 TDD106Z10320 10,317 .4062 11 238 215 2,2 46 293 TDS501A10317
3899791 TDD106Z10500 10,500 .4134 11 240 217 2,2 46 293 TDS501A10500
3899792 TDD106Z10716 10,716 .4219 11 242 218 2,3 46 293 TDS501A10716
3899793 TDD106Z11000 11,000 .4331 11 258 233 2,3 46 317 TDS501A11000
3899794 TDD106Z11113 11,113 .4375 12 259 234 2,4 48 317 TDS501A11113
3899795 TDD106Z11500 11,500 .4528 12 262 237 2,4 48 317 TDS501A11500
3899797 TDD106Z12000 12,000 .4724 12 266 240 2,5 48 317 TDS501A12000
3899799 TDD106Z12500 12,500 .4921 13 284 257 2,7 50 341 TDS501A12500
3899800 TDD106Z12700 12,700 .5000 13 285 258 2,7 50 341 TDS501A12700
3899801 TDD106Z13000 13,000 .5118 13 288 260 2,8 50 341 TDS501A13000
Solid Carbide Drills
rst choice
alternate choice
(Deep-Hole Drills for Steel and Cast Iron • 2 Flute • WU20PD
™
• 20 x D • Z Shank — continued)
WID_Master16_Holemaking_SolidCarbideDrills_T108_T109_Metric_REBRAND.indd 109 10/29/15 1:23 PM
T110
LViWID M 16 H l ki S lidC bid D ill T110 T111 M i REBRANDO b 15 20154 11PM
widia.com
WU20PD
(continued)
Solid Carbide Drills
Deep-Hole Drills with Through Coolant • Steel and Cast Iron • 25 x D
Deep-Hole Drills for Steel and Cast Iron • 2 Flute • WU20PD
™
• 25 x D • Z Shank
D1 diameter
grade WU20PD
TiAlN
order # catalogue # mm in D L3 L4 max L5 LS L
pilot
drill
3899708 TDD107Z03000 3,000 .1181 3 83 75 0,6 30 116 TDS501A03000
3899709 TDD107Z03175 3,175 .1250 4 99 90 0,6 32 145 TDS501A03175
3899710 TDD107Z03500 3,500 .1378 4 103 94 0,7 32 145 TDS501A03500
3899712 TDD107Z03800 3,800 .1496 4 107 98 0,8 32 145 TDS501A03800
3899733 TDD107Z03970 3,970 .1563 4 109 100 0,8 32 145 TDS501A03970
3899734 TDD107Z04000 4,000 .1575 4 110 100 0,8 32 145 TDS501A04000
3899735 TDD107Z04039 4,039 .1590 5 124 113 0,8 34 174 TDS501A04039
3899737 TDD107Z04500 4,500 .1772 5 130 119 0,9 34 174 TDS501A04500
3899739 TDD107Z04763 4,763 .1875 5 134 122 1,0 34 174 TDS501A04763
3899740 TDD107Z05000 5,000 .1969 5 137 125 1,0 34 174 TDS501A05000
3899743 TDD107Z05500 5,500 .2165 6 157 144 1,1 36 203 TDS501A05500
3899744 TDD107Z05558 5,558 .2188 6 158 145 1,2 36 203 TDS501A05558
3899745 TDD107Z05800 5,800 .2283 6 161 148 1,2 36 203 TDS501A05800
3899746 TDD107Z06000 6,000 .2362 6 164 150 1,2 36 203 TDS501A06000
3899748 TDD107Z06350 6,350 .2500 7 182 167 1,3 38 232 TDS501A06350
3899749 TDD107Z06500 6,500 .2559 7 184 169 1,4 38 232 TDS501A06500
3899750 TDD107Z06528 6,528 .2570 7 185 169 1,4 38 232 TDS501A06528
3899751 TDD107Z06746 6,746 .2656 7 188 172 1,4 38 232 TDS501A06746
3899753 TDD107Z06909 6,909 .2720 7 190 174 1,4 38 232 TDS501A06909
3899754 TDD107Z07000 7,000 .2756 7 191 175 1,5 38 232 TDS501A07000
3899567 TDD107Z07541 7,541 .2969 8 212 194 1,6 40 261 TDS501A07541
3899568 TDD107Z07938 7,938 .3125 8 217 199 1,7 40 261 TDS501A07938
3899569 TDD107Z08000 8,000 .3150 8 218 200 1,7 40 261 TDS501A08000
3899571 TDD107Z08433 8,433 .3320 9 237 218 1,8 42 290 TDS501A08433
Solid Carbide Drills
rst choice
alternate choice
WID_Master16_Holemaking_SolidCarbideDrills_T110_T111_Metric_REBRAND.indd 110 10/29/15 1:23 PM
T111
LViWID M 16 H l ki S lidC bid D ill T110 T111 M i REBRANDO b 1520154 11PM
widia.com
WU20PD
Solid Carbide Drills
Deep-Hole Drills with Through Coolant • Steel and Cast Iron • 25 x D
D1 diameter
grade WU20PD
TiAlN
order # catalogue # mm in D L3 L4 max L5 LS L
pilot
drill
3899572 TDD107Z08500 8,500 .3346 9 238 219 1,8 42 290 TDS501A08500
3899603 TDD107Z08733 8,733 .3438 9 241 222 1,8 42 290 TDS501A08733
3899604 TDD107Z09000 9,000 .3543 9 245 225 1,9 42 290 TDS501A09000
3899605 TDD107Z09347 9,347 .3680 10 263 242 2,0 44 319 TDS501A09347
3899606 TDD107Z09500 9,500 .3740 10 265 244 2,0 44 319 TDS501A09500
3899607 TDD107Z09525 9,525 .3750 10 266 244 2,0 44 319 TDS501A09525
3899610 TDD107Z10000 10,000 .3937 10 272 250 2,1 44 319 TDS501A10000
3899611 TDD107Z10300 10,200 .4016 11 288 265 2,2 46 348 TDS501A10300
3899612 TDD107Z10320 10,317 .4062 11 290 267 2,2 46 348 TDS501A10317
3899613 TDD107Z10500 10,500 .4134 11 292 269 2,2 46 348 TDS501A10500
3899614 TDD107Z10716 10,716 .4219 11 295 272 2,3 46 348 TDS501A10716
3899615 TDD107Z11000 11,000 .4331 11 313 288 2,3 46 377 TDS501A11000
3899616 TDD107Z11113 11,113 .4375 12 314 289 2,4 48 377 TDS501A11113
3899617 TDD107Z11500 11,500 .4528 12 319 294 2,4 48 377 TDS501A11500
3899619 TDD107Z12000 12,000 .4724 12 326 300 2,5 48 377 TDS501A12000
3899621 TDD107Z12500 12,500 .4921 13 346 319 2,7 50 406 TDS501A12500
3899622 TDD107Z12700 12,700 .5000 13 349 321 2,7 50 406 TDS501A12700
3899623 TDD107Z13000 13,000 .5118 13 353 325 2,8 50 406 TDS501A13000
Solid Carbide Drills
(Deep-Hole Drills for Steel and Cast Iron • 2 Flute • WU20PD
™
• 25 x D • Z Shank — continued)
rst choice
alternate choice
WID_Master16_Holemaking_SolidCarbideDrills_T110_T111_Metric_REBRAND.indd 111 10/29/15 1:23 PM
T112
LViWID M 16 H l ki S lidC bid D ill T112 T113 M i REBRANDO b 15 20154 11PM
widia.com
WU20PD
Solid Carbide Drills
Deep-Hole Drills with Through Coolant • Steel and Cast Iron • 30 x D
Deep-Hole Drills for Steel and Cast Iron • 2 Flute • WU20PD
™
• 30 x D • Z Shank
D1 diameter
grade WU20PD
TiAlN
order # catalogue # mm in D L3 L4 max L5 LS L
pilot
drill
3899539 TDD108Z03000 3,000 .1181 3 98 90 0,6 30 131 TDS501A03000
3899540 TDD108Z03175 3,175 .1250 4 115 106 0,6 32 165 TDS501A03175
3899541 TDD108Z03500 3,500 .1378 4 121 112 0,7 32 165 TDS501A03500
3899542 TDD108Z03571 3,571 .1406 4 122 113 0,7 32 165 TDS501A03571
3899573 TDD108Z03800 3,800 .1496 4 126 117 0,8 32 165 TDS501A03800
3899574 TDD108Z03970 3,970 .1563 4 129 119 0,8 32 165 TDS501A03970
3899575 TDD108Z04000 4,000 .1575 4 130 120 0,8 32 165 TDS501A04000
3899576 TDD108Z04039 4,039 .1590 5 144 134 0,8 34 199 TDS501A04039
3899577 TDD108Z04300 4,300 .1693 5 149 138 0,9 34 199 TDS501A04300
3899578 TDD108Z04500 4,500 .1772 5 153 142 0,9 34 199 TDS501A04500
3899579 TDD108Z04623 4,623 .1820 5 155 144 1,0 34 199 TDS501A04623
3899580 TDD108Z04763 4,763 .1875 5 157 146 1,0 34 199 TDS501A04763
3899581 TDD108Z05000 5,000 .1969 5 162 150 1,0 34 199 TDS501A05000
3899582 TDD108Z05159 5,159 .2031 6 180 166 1,1 36 233 TDS501A05160
3899583 TDD108Z05410 5,410 .2130 6 183 170 1,1 36 233 TDS501A05410
3899584 TDD108Z05500 5,500 .2165 6 185 172 1,1 36 233 TDS501A05500
3899585 TDD108Z05558 5,558 .2188 6 186 172 1,2 36 233 TDS501A05558
3899586 TDD108Z05800 5,800 .2283 6 190 177 1,2 36 233 TDS501A05800
3899587 TDD108Z06000 6,000 .2362 6 194 180 1,2 36 233 TDS501A06000
3899588 TDD108Z06200 6,200 .2441 7 211 196 1,3 38 267 TDS501A06200
3899589 TDD108Z06350 6,350 .2500 7 214 199 1,3 38 267 TDS501A06350
3899590 TDD108Z06500 6,500 .2559 7 217 202 1,4 38 267 TDS501A06500
3899591 TDD108Z06528 6,528 .2570 7 217 202 1,4 38 267 TDS501A06528
3899592 TDD108Z06746 6,746 .2656 7 221 206 1,4 38 267 TDS501A06746
rst choice
alternate choice
Solid Carbide Drills
(continued)
WID_Master16_Holemaking_SolidCarbideDrills_T112_T113_Metric_REBRAND.indd 112 10/29/15 1:23 PM
T113
LViWID M 16 H l ki S lidC bid D ill T112 T113 M i REBRANDO b 1520154 11PM
widia.com
WU20PD
Solid Carbide Drills
Deep-Hole Drills with Through Coolant • Steel and Cast Iron • 30 x D
D1 diameter
grade WU20PD
TiAlN
order # catalogue # mm in D L3 L4 max L5 LS L
pilot
drill
3899593 TDD108Z06800 6,800 .2677 7 222 207 1,4 38 267 TDS501A06800
3899594 TDD108Z06909 6,909 .2720 7 224 208 1,4 38 267 TDS501A06909
3899595 TDD108Z07000 7,000 .2756 7 226 210 1,5 38 267 TDS501A07000
3899600 TDD108Z07145 7,145 .2813 8 242 225 1,5 40 301 TDS501A07145
3899601 TDD108Z07500 7,500 .2953 8 249 232 1,6 40 301 TDS501A07500
3899653 TDD108Z07938 7,938 .3125 8 257 239 1,7 40 301 TDS501A07938
3899654 TDD108Z08000 8,000 .3150 8 258 240 1,7 40 301 TDS501A08000
3899655 TDD108Z08334 8,334 .3281 9 278 259 1,8 42 335 TDS501A08334
3899657 TDD108Z08500 8,500 .3346 9 281 262 1,8 42 335 TDS501A08500
3899658 TDD108Z08733 8,733 .3438 9 285 265 1,8 42 335 TDS501A08733
3899659 TDD108Z09000 9,000 .3543 9 290 270 1,9 42 335 TDS501A09000
3899661 TDD108Z09500 9,500 .3740 10 313 292 2,0 44 369 TDS501A09500
3899662 TDD108Z09525 9,525 .3750 10 313 292 2,0 44 369 TDS501A09525
3899663 TDD108Z09750 9,750 .3839 10 317 296 2,1 44 369 TDS501A09750
3899665 TDD108Z10000 10,000 .3937 10 322 300 2,1 44 369 TDS501A10000
3899666 TDD108Z10200 10,200 .4016 11 339 316 2,2 46 403 TDS501A10200
3899667 TDD108Z10320 10,317 .4062 11 342 318 2,2 46 403 TDS501A10317
3899668 TDD108Z10500 10,500 .4134 11 345 322 2,2 46 403 TDS501A10500
3899670 TDD108Z11000 11,000 .4331 11 368 343 2,3 46 437 TDS501A11000
3899671 TDD108Z11113 11,113 .4375 12 370 345 2,4 48 437 TDS501A11113
3899672 TDD108Z11500 11,500 .4528 12 377 352 2,4 48 437 TDS501A11500
3899674 TDD108Z12000 12,000 .4724 12 386 360 2,5 48 437 TDS501A12000
3899675 TDD108Z12304 12,304 .4844 13 405 378 2,6 50 471 TDS501A12304
3899676 TDD108Z12500 12,500 .4921 13 409 382 2,7 50 471 TDS501A12500
3899677 TDD108Z12700 12,700 .5000 13 412 385 2,7 50 471 TDS501A12700
3899678 TDD108Z13000 13,000 .5118 13 418 390 2,8 50 471 TDS501A13000
rst choice
alternate choice
Solid Carbide Drills
(Deep-Hole Drills for Steel and Cast Iron • 2 Flute • WU20PD
™
• 30 x D • Z Shank — continued)
WID_Master16_Holemaking_SolidCarbideDrills_T112_T113_Metric_REBRAND.indd 113 10/29/15 1:23 PM
T114
LViWID M 16 H l ki S lidC bid D ill T114 T115 M i REBRANDN b 12 20159 45AM
widia.com
Solid Carbide Drills
Solid Carbide Drills
Application Data • TOP DRILL™ Deep-Hole Drills • 15 x D, 20 x D, 25 x D, 30 x D
Series TDD • Deep-Hole SC Drills • Through Coolant Applications • Metric
Material
Group
Cutting Speed — vc Recommended Feed Rate (f) by Diameter
Range — m/min
min – max
Tool Diameter
(mm) 3,0 4,0 6,0 8,0 10,0 12,0 16,0 20,0
P
1
90 – 130 mm/r 0,08–0,12 0,12–0,18 0,18–0,20 0,20–0,22 0,22–0,25 0,25–0,28 0,28–0,30 0,30–0,34
2
80 – 115 mm/r 0,08–0,12 0,12–0,18 0,18–0,20 0,20–0,22 0,22–0,25 0,25–0,28 0,28–0,30 0,30–0,34
3
70 – 110 mm/r 0,05–0,10 0,10–0,16 0,16–0,18 0,18–0,20 0,20–0,22 0,22–0,24 0,24–0,26 0,26–0,28
4
65 – 95 mm/r 0,05–0,10 0,10–0,16 0,16–0,18 0,18–0,20 0,20–0,22 0,22–0,24 0,24–0,26 0,26–0,28
K
1
105 – 145 mm/r 0,10–0,15 0,15–0,20 0,20–0,25 0,25–0,28 0,28–0,30 0,30–0,33 0,33–0,36 0,36–0,38
2
85 – 120 mm/r 0,10–0,15 0,15–0,20 0,20–0,25 0,25–0,28 0,28–0,30 0,30–0,33 0,33–0,36 0,36–0,38
3
100 – 140 mm/r 0,10–0,15 0,15–0,20 0,20–0,25 0,25–0,28 0,28–0,30 0,30–0,33 0,33–0,36 0,36–0,38
Metric
tolerance
nominal size range D1 tolerance D1 tolerance D tolerance h6
>3–6 0,000/-0,012 >3–6 0,000/-0,008
>6–10 0,000/-0,015 >6–10 0,000/-0,009
>10–13 0,000/-0,018 >10–13 0,000/-0,011
WID_Master16_Holemaking_SolidCarbideDrills_T114_T115_Metric_REBRAND.indd 114 11/12/15 12:02 PM
Diameters
• Intermediate sizes, even up to 16mm diameter, available
as semi-standards.
Lengths
• Length variations, including longer versions up to 550mm
depending on diameter, available as custom solutions.
Material-Specifi c
• For drilling non-ferrous materials, sharp and uncoated versions
are recommended and available as custom solutions.
Consult the custom solutions department for specifi c applications.
WIDIA™
TOP DRILL
™
Deep-Hole Drills
Customisation
WID_Master16_Holemaking_SolidCarbideDrills_T114_T115_Metric_REBRAND.indd 115 11/12/15 12:02 PM
T116
LViWID M 16 H l ki S lidC bid D ill T116 T117 M i REBRANDD b 15 201510 27AM
widia.com
Solid Carbide Drills
Deep-Hole Drills Application Rules
1) Pilot Drill Hole — IMPORTANT!
• The point angle of the pilot drill must be greater than
one of the following deep-hole drills to protect its
cutting corners.
• The diameter size of the pilot drill must be greater
than one of the deep-hole drills to enable easy t
and protect margin lands. The required difference
in diameter is covered by design with the different
position of tolerance.
• Drill Ø = nominal Ø up to nominal +0,010mm.
• Depth of pilot hole: minimum 2 x D.
• Deeper pilot holes are preferable.
Recommendations:
• Use a conical (TDS*) or split-point drill to pilot
(do not use a TDG, VariDrill
™
, or TDS 12 x D
or any competitive drill).
• Check the pilot drill for wear, which can lead to
premature wear on the TDD10* cutting edge and
possibly catastrophic failure.
• TOP DRILL S
™
for steel or cast iron (TDS4* series)
and TOP DRILL S +
™
for multiple applications
(TDS501* series 3 x D and TD502* series 5 x D)
with a 140° point angle are recommended.
• TDS503* series 8 x D and TDS504* series 12 x D
is not recommended as the point angle is 132°!
2) Feed TDD10* into Pilot Hole
• Max 500 RPM and recommended feed rate;
no rapid traverse.
• Run anti-clockwise, especially in horizontal
applications to protect the cutting edge,
when entering the pilot hole.
• Depth: 1mm above the bottom of pilot hole.
• Feed TDD10* into pilot hole
Recommendations:
• Reduce cutting speed to minimise imbalances in
machine spindle/adaptor!
4) Drill Retraction
Cutting Parameters: 50–500 RPM and feed
rate 2–6 m/min.
Recommendations:
To achieve the best tool performance, we recommend
using the deep-hole drill with a hydraulic chuck.
Reduce cutting speed to minimise imbalances in machine spindle/adaptor!
3) Drill Hole
Cutting Parameters: Start recommended speed
and feed rate at 1mm from the bottom of the pilot hole,
clockwise.
Recommendations:
• DO NOT PECK OR DWELL up to 30 x D!
• With long-chipping steel materials, it may be necessary
to increase feed rate by 10–20% to provide optimal
chip control.
• For long-chipping aluminium materials, it may be
necessary to decrease feed rate and increase speed.
• Reduce feed rate on angled exits and crossholes
by 50–60%.
HP feed recommendations are usually higher than with competitive SC drills!
5) Vertical Applications
• If the pilot holes are close to each other, chips can
fall into the neighboring hole.
• Do not enter a pilot hole that might contain chips
with a deep hole drill to avoid chip jamming, wear,
or breakage.
Horizontal drilling process preferred for optimum chip evacuation.
• If required holes are close to each other, use smart
drilling strategies, make sure the pilot holes are getting
properly cleaned, or switch to horizontal drilling.
WID_Master16_Holemaking_SolidCarbideDrills_T116_T117_Metric_REBRAND.indd 116 12/15/15 10:27 AM
T117
LViWID M 16 H l ki S lidC bid D ill T116 T117 M i REBRANDD b 15201510 27AM
widia.com
Solid Carbide Drills
Deep-Hole Drills Application Rules
7) Minimal Quantity Lubrication
• On MQL applications, make sure that the coolant is
directly supplied from the chuck into the back end of
the drill shank (without gap) to avoid leakage.
• Pressure should be between 1–10 bar depending on
coolant hole size.
• Spray contains an amount of oil less than 50 ml/h.
• If required, the shank can be evenly optimised for MQL
applications with enlarged 90° chamfer instead of 40°.
MQL back end according
to DIN 69090-3
8) Shanks
• Other than normal SC Drills, TDD10* series have a “Z”
shank, increasing with 1mm-steps.
• For drills with uneven shank size, use reduction sleeves
to adapt the shank to the customer´s toolholder.
Achieve the best tool performance with hydraulic chucks.
6) Coolant
• For increased stability, the coolant channels of the
TDD10* are smaller than on typical WIDIA
™
drills.
• Steady supply of coolant delivered to the cutting edges
necessary. If coolant supply is not steady or is unequal
through both channels, check:
— Coolant ltering system.
—Sealing of adaptor/spindle.
— Chips blocking the coolant
hole on the drill shank.
• Make sure that the coolant supply reaches the cutting
edge before drilling begins.
• Pressure by diameter: <5mm 40–50 bar maximum;
>5mm 25 bar minimum.
• The clamping force is better with increasing diameter.
• If required, DIN-shanks (even, 2mm steps) are available
as custom solutions.
12mm hydraulic
reducer sleeve
20mm hydraulic
reducer sleeve
25mm hydraulic
reducer sleeve
32mm hydraulic
reducer sleeve
.500" hydraulic
reducer sleeve
.750" hydraulic
reducer sleeve
D1
order
number
catalogue
number
order
number
catalogue
number
order
number
catalogue
number
order
number
catalogue
number
order
number
catalogue
number
order
number
catalogue
number
33026450 12MHC030M 3026648 20MHC030M 3026662 25MHC030M – – 2248993 50HC030M 2248995 75HC030M
43026451 12MHC040M 3026649 20MHC040M 3026663 25MHC040M – – 1606050 50HC040M 2248996 75HC040M
53026452 12MHC050M 3026650 20MHC050M 3026664 25MHC050M – – 2248994 50HC050M 2248997 75HC050M
63026643 12MHC060M 3026651 20MHC060M 3026665 25MHC060M 3026675 32MHC060M 1606061 50HC060M 1093271 75HC060M
73026644 12MHC070M 3026652 20MHC070M 3026666 25MHC070M 3026676 32MHC070M – – – –
83026645 12MHC080M 3026653 20MHC080M 3026667 25MHC080M 3026677 32MHC080M 1606062 50HC080M 1093272 75HC080M
93026646 12MHC090M 3026654 20MHC090M 3026668 25MHC090M 3026678 32MHC090M – – – –
10 3026647 12MHC100M 3026655 20MHC100M 3026669 25MHC100M 3026679 32MHC100M 1606064 50HC100M 1093273 75HC100M
11 – – 3026656 20MHC110M – – 3026680 32MHC110M – – – –
12 – – 3026657 20MHC120M 3026669 25MHC120M 3026681 32MHC120M – – 1093524 75HC120M
13 – – 3026658 20MHC130M – – 3026682 32MHC130M – – – –
14 – – 3026659 20MHC140M 3026671 25MHC140M 3026683 32MHC140M – – 1093525 75HC140M
15 – – 3026660 20MHC150M – – 3026684 32MHC150M – – – –
16 – – 3026661 20MHC160M 3026672 25MHC160M 3026685 32MHC160M – – 1093526 75HC160M
WID_Master16_Holemaking_SolidCarbideDrills_T116_T117_Metric_REBRAND.indd 117 12/15/15 10:27 AM
T118
LViWID M 16 H l ki S lidC bid D ill T118 T119 M i REBRANDD b 15 201510 31AM
widia.com
TOP DRILL G is WIDIA’s solution for diffi cult drilling applications. Designed specifi cally
for non-ferrous materials, TDG can be used on challenging applications with tighter hole
tolerance, inclined planes, intersecting holes, and cored holes. The design of these drills
also makes them appropriate for drilling custom aluminium applications.
• Next generation of GGX WIDIA-Rübig™ series.
• Targeted for aluminium and non-ferrous materials.
• Can be used in challenging conditions.
• Good for multi-step drills.
TOP DRILL G
Diffi cult Drilling Applications •
WIDIA™ TOP DRILL G™ for Non-Ferrous Materials
WID_Master16_Holemaking_SolidCarbideDrills_T118_T119_Metric_REBRAND.indd 118 12/15/15 10:32 AM
T119
LViWID M 16 H l ki S lidC bid D ill T118 T119 M i REBRANDD b 15201510 31AM
widia.com
cored hole
intersecting hole
inclined plane
Eliminate operations
Special designs possible for multistage
drilling and tight tolerance capabilities.
Excellent stability
The TDG design enables it to
be used for even the toughest
non-ferrous drilling applications.
drilled hole
cored hole
multistage drill (special)
profile drilling tools (special)
TOP DRILL G™ Design
WIDIA™ Advantage
TDG is designed to handle the toughest non-ferrous drilling applications. The
WN10HD™ grade is the latest in application-specific technology. This advanced
grade, combined with the TDG’s optimal concentricity and safe transmission
of torque, gives it long tool life and extreme repeatability. The design of TDG is
optimised to evacuate “sticky” chips that result from drilling non-ferrous materials.
Easily evacuating these difficult-to-remove chips results in better hole quality
due to less heat and friction while drilling.
• Lower cost-per-hole due to high MRR and long tool life.
• Consistent performance from internally controlled supply chain:
Powder > Rod > Grinding > Coating
• Part of the complete WIDIA holemaking solution.
• Get more predictable results from local regrind services using OEM
standards to recondition, ensuring value throughout the entire life of the drill.
• Broad range of standard lengths, diameters, and coolant options in one line.
Includes extensive intermediate metric, inch, fraction, and wire sizes,
including tap drill sizes.
WID_Master16_Holemaking_SolidCarbideDrills_T118_T119_Metric_REBRAND.indd 119 12/15/15 10:32 AM
T120
LViWID M 16 H l ki S lidC bid D ill T120 T121 M i REBRANDO b 15 20154 16PM
widia.com
WN10HD
Solid Carbide Drills
TOP DRILL G™ • Non-Ferrous Materials • 5 x D
TDG532A • 5 x D
D1 diameter
grade WN10HD
order # catalogue # mm in L L4 max L3 L5 LS D
4157950 TDG532A03000 3,000 .1181 66 23 28 0,7 36 6
4157951 TDG532A03048 3,048 .1200 66 23 28 0,7 36 6
4157952 TDG532A03100 3,100 .1220 66 23 28 0,7 36 6
4157973 TDG532A03175 3,175 .1250 66 23 28 0,7 36 6
4157974 TDG532A03200 3,200 .1260 66 23 28 0,7 36 6
4157975 TDG532A03264 3,264 .1285 66 23 28 0,8 36 6
4157976 TDG532A03300 3,300 .1299 66 23 28 0,8 36 6
4157977 TDG532A03400 3,400 .1339 66 23 28 0,8 36 6
4157978 TDG532A03455 3,455 .1360 66 23 28 0,8 36 6
4157979 TDG532A03500 3,500 .1378 66 23 28 0,8 36 6
4157980 TDG532A03571 3,571 .1406 66 23 28 0,8 36 6
4157981 TDG532A03600 3,600 .1417 66 23 28 0,8 36 6
4157982 TDG532A03658 3,658 .1440 66 23 28 0,9 36 6
4157983 TDG532A03700 3,700 .1457 66 23 28 0,9 36 6
4157984 TDG532A03734 3,734 .1470 66 23 28 0,9 36 6
4157985 TDG532A03800 3,800 .1496 74 29 36 0,9 36 6
4157986 TDG532A03900 3,900 .1535 74 29 36 0,9 36 6
4157987 TDG532A03970 3,970 .1563 74 29 36 0,9 36 6
4157988 TDG532A04000 4,000 .1575 74 29 36 0,9 36 6
4157989 TDG532A04039 4,039 .1590 74 29 36 0,9 36 6
4157990 TDG532A04090 4,090 .1610 74 29 36 1,0 36 6
4157991 TDG532A04100 4,100 .1614 74 29 36 1,0 36 6
4157992 TDG532A04200 4,200 .1654 74 29 36 1,0 36 6
4157993 TDG532A04217 4,217 .1660 74 29 36 1,0 36 6
rst choice
alternate choice
For information on L, L3, and L4 max, see page T143.
Solid Carbide Drills
(continued)
WID_Master16_Holemaking_SolidCarbideDrills_T120_T121_Metric_REBRAND.indd 120 10/29/15 1:23 PM
T121
LViWID M 16 H l ki S lidC bid D ill T120 T121 M i REBRANDO b 1520154 16PM
widia.com
WN10HD
D1 diameter
grade WN10HD
order # catalogue # mm in L L4 max L3 L5 LS D
4157994 TDG532A04300 4,300 .1693 74 29 36 1,0 36 6
4157995 TDG532A04366 4,366 .1719 74 29 36 1,0 36 6
4157996 TDG532A04400 4,400 .1732 74 29 36 1,0 36 6
4157997 TDG532A04500 4,500 .1772 74 29 36 1,0 36 6
4157998 TDG532A04600 4,600 .1811 74 29 36 1,1 36 6
4157999 TDG532A04623 4,623 .1820 74 29 36 1,1 36 6
4158000 TDG532A04700 4,700 .1850 74 29 36 1,1 36 6
4158001 TDG532A04763 4,763 .1875 82 35 44 1,1 36 6
4158002 TDG532A04800 4,800 .1890 82 35 44 1,1 36 6
4158003 TDG532A04852 4,852 .1910 82 35 44 1,1 36 6
4158004 TDG532A04900 4,900 .1929 82 35 44 1,1 36 6
4158005 TDG532A05000 5,000 .1969 82 35 44 1,2 36 6
4158006 TDG532A05100 5,100 .2008 82 35 44 1,2 36 6
4158007 TDG532A05106 5,106 .2010 82 35 44 1,2 36 6
4158008 TDG532A05159 5,159 .2031 82 35 44 1,2 36 6
4158009 TDG532A05200 5,200 .2047 82 35 44 1,2 36 6
4158010 TDG532A05300 5,300 .2087 82 35 44 1,2 36 6
4158011 TDG532A05400 5,400 .2126 82 35 44 1,3 36 6
4158012 TDG532A05410 5,410 .2130 82 35 44 1,3 36 6
4158013 TDG532A05500 5,500 .2165 82 35 44 1,3 36 6
4158014 TDG532A05558 5,558 .2188 82 35 44 1,3 36 6
4158015 TDG532A05600 5,600 .2205 82 35 44 1,3 36 6
4158016 TDG532A05616 5,616 .2211 82 35 44 1,3 36 6
4158017 TDG532A05700 5,700 .2244 82 35 44 1,3 36 6
4158018 TDG532A05800 5,800 .2283 82 35 44 1,4 36 6
4158019 TDG532A05900 5,900 .2323 82 35 44 1,4 36 6
4158020 TDG532A05954 5,954 .2344 82 35 44 1,4 36 6
4158021 TDG532A06000 6,000 .2362 82 35 44 1,4 36 6
4158022 TDG532A06100 6,100 .2402 91 43 53 1,4 36 8
4158023 TDG532A06200 6,200 .2441 91 43 53 1,4 36 8
4158024 TDG532A06300 6,300 .2480 91 43 53 1,5 36 8
4158025 TDG532A06350 6,350 .2500 91 43 53 1,5 36 8
4158026 TDG532A06400 6,400 .2520 91 43 53 1,5 36 8
4158027 TDG532A06500 6,500 .2559 91 43 53 1,5 36 8
4158028 TDG532A06528 6,528 .2570 91 43 53 1,5 36 8
4158029 TDG532A06600 6,600 .2598 91 43 53 1,5 36 8
4158030 TDG532A06630 6,630 .2610 91 43 53 1,5 36 8
4158031 TDG532A06700 6,700 .2638 91 43 53 1,6 36 8
4158032 TDG532A06746 6,746 .2656 91 43 53 1,6 36 8
4158033 TDG532A06800 6,800 .2677 91 43 53 1,6 36 8
(TDG532A • 5 x D — continued)
(continued)
rst choice
alternate choice
Solid Carbide Drills
TOP DRILL G™ • Non-Ferrous Materials • 5 x D
Solid Carbide Drills
WID_Master16_Holemaking_SolidCarbideDrills_T120_T121_Metric_REBRAND.indd 121 10/29/15 1:23 PM
T122
LViWID M 16 H l ki S lidC bid D ill T122 T123 M i REBRANDO b 15 20154 17PM
widia.com
WN10HD
(TDG532A • 5 x D — continued)
rst choice
alternate choice
Solid Carbide Drills
TOP DRILL G™ • Non-Ferrous Materials • 5 x D
Solid Carbide Drills
(continued)
D1 diameter
grade WN10HD
order # catalogue # mm in L L4 max L3 L5 LS D
4158034 TDG532A06900 6,900 .2717 91 43 53 1,6 36 8
4158035 TDG532A07000 7,000 .2756 91 43 53 1,6 36 8
4158036 TDG532A07100 7,100 .2795 91 43 53 1,7 36 8
4158037 TDG532A07145 7,145 .2813 91 43 53 1,7 36 8
4158038 TDG532A07200 7,200 .2835 91 43 53 1,7 36 8
4158039 TDG532A07300 7,300 .2874 91 43 53 1,7 36 8
4158040 TDG532A07400 7,400 .2913 91 43 53 1,7 36 8
4158041 TDG532A07500 7,500 .2953 91 43 53 1,7 36 8
4158042 TDG532A07541 7,541 .2969 91 43 53 1,8 36 8
4158043 TDG532A07600 7,600 .2992 91 43 53 1,8 36 8
4158044 TDG532A07700 7,700 .3031 91 43 53 1,8 36 8
4158045 TDG532A07800 7,800 .3071 91 43 53 1,8 36 8
4158046 TDG532A07900 7,900 .3110 91 43 53 1,8 36 8
4158047 TDG532A07938 7,938 .3125 91 43 53 1,9 36 8
4158048 TDG532A08000 8,000 .3150 91 43 53 1,9 36 8
4158049 TDG532A08100 8,100 .3189 103 49 61 1,9 40 10
4158050 TDG532A08200 8,200 .3228 103 49 61 1,9 40 10
4158051 TDG532A08300 8,300 .3268 103 49 61 1,9 40 10
4158052 TDG532A08334 8,334 .3281 103 49 61 1,9 40 10
4158053 TDG532A08400 8,400 .3307 103 49 61 2,0 40 10
4158054 TDG532A08433 8,433 .3320 103 49 61 2,0 40 10
4158055 TDG532A08500 8,500 .3346 103 49 61 2,0 40 10
4158056 TDG532A08600 8,600 .3386 103 49 61 2,0 40 10
4158057 TDG532A08700 8,700 .3425 103 49 61 2,0 40 10
4158058 TDG532A08733 8,733 .3438 103 49 61 2,0 40 10
4158059 TDG532A08800 8,800 .3465 103 49 61 2,1 40 10
4158060 TDG532A08900 8,900 .3504 103 49 61 2,1 40 10
4158061 TDG532A09000 9,000 .3543 103 49 61 2,1 40 10
4158062 TDG532A09100 9,100 .3583 103 49 61 2,1 40 10
4158063 TDG532A09129 9,129 .3594 103 49 61 2,1 40 10
4158064 TDG532A09200 9,200 .3622 103 49 61 2,1 40 10
4158065 TDG532A09300 9,300 .3661 103 49 61 2,2 40 10
4158066 TDG532A09347 9,347 .3680 103 49 61 2,2 40 10
4158067 TDG532A09400 9,400 .3701 103 49 61 2,2 40 10
4158068 TDG532A09500 9,500 .3740 103 49 61 2,2 40 10
4158069 TDG532A09525 9,525 .3750 103 49 61 2,2 40 10
4158070 TDG532A09600 9,600 .3780 103 49 61 2,2 40 10
4158071 TDG532A09700 9,700 .3819 103 49 61 2,3 40 10
4158072 TDG532A09800 9,800 .3858 103 49 61 2,3 40 10
4158073 TDG532A09900 9,900 .3898 103 49 61 2,3 40 10
WID_Master16_Holemaking_SolidCarbideDrills_T122_T123_Metric_REBRAND.indd 122 10/29/15 1:23 PM
T123
LViWID M 16 H l ki S lidC bid D ill T122 T123 M i REBRANDO b 1520154 17PM
widia.com
WN10HD
(TDG532A • 5 x D — continued)
(continued)
rst choice
alternate choice
Solid Carbide Drills
TOP DRILL G™ • Non-Ferrous Materials • 5 x D
Solid Carbide Drills
D1 diameter
grade WN10HD
order # catalogue # mm in L L4 max L3 L5 LS D
4158074 TDG532A09921 9,921 .3906 103 49 61 2,3 40 10
4158081 TDG532A10000 10,000 .3937 103 49 61 2,3 40 10
4158082 TDG532A10100 10,100 .3976 118 56 71 2,4 45 12
4158353 TDG532A10200 10,200 .4016 118 56 71 2,4 45 12
4158354 TDG532A10300 10,300 .4055 118 56 71 2,4 45 12
4158355 TDG532A10320 10,320 .4063 118 56 71 2,4 45 12
4158356 TDG532A10400 10,400 .4094 118 56 71 2,4 45 12
4158357 TDG532A10500 10,500 .4134 118 56 71 2,4 45 12
4158358 TDG532A10600 10,600 .4173 118 56 71 2,5 45 12
4158359 TDG532A10700 10,700 .4213 118 56 71 2,5 45 12
4158360 TDG532A10716 10,716 .4219 118 56 71 2,5 45 12
4158361 TDG532A10800 10,800 .4252 118 56 71 2,5 45 12
4158362 TDG532A10900 10,900 .4291 118 56 71 2,5 45 12
4158363 TDG532A11000 11,000 .4331 118 56 71 2,6 45 12
4158364 TDG532A11100 11,100 .4370 118 56 71 2,6 45 12
4158365 TDG532A11113 11,113 .4375 118 56 71 2,6 45 12
4158366 TDG532A11200 11,200 .4409 118 56 71 2,6 45 12
4158367 TDG532A11300 11,300 .4449 118 56 71 2,6 45 12
4158368 TDG532A11400 11,400 .4488 118 56 71 2,7 45 12
4158369 TDG532A11500 11,500 .4528 118 56 71 2,7 45 12
4158370 TDG532A11509 11,509 .4531 118 56 71 2,7 45 12
4158371 TDG532A11600 11,600 .4567 118 56 71 2,7 45 12
4158372 TDG532A11700 11,700 .4606 118 56 71 2,7 45 12
4158373 TDG532A11800 11,800 .4646 118 56 71 2,8 45 12
4158374 TDG532A11900 11,900 .4685 118 56 71 2,8 45 12
4158375 TDG532A11908 11,908 .4688 118 56 71 2,8 45 12
4158376 TDG532A12000 12,000 .4724 118 56 71 2,8 45 12
4158377 TDG532A12100 12,100 .4764 124 60 77 2,8 45 14
4158378 TDG532A12200 12,200 .4803 124 60 77 2,8 45 14
4158379 TDG532A12300 12,300 .4843 124 60 77 2,9 45 14
4158380 TDG532A12304 12,304 .4844 124 60 77 2,9 45 14
4158381 TDG532A12400 12,400 .4882 124 60 77 2,9 45 14
4158382 TDG532A12500 12,500 .4921 124 60 77 2,9 45 14
4158383 TDG532A12600 12,600 .4961 124 60 77 2,9 45 14
4158384 TDG532A12700 12,700 .5000 124 60 77 3,0 45 14
4158385 TDG532A12800 12,800 .5039 124 60 77 3,0 45 14
4158386 TDG532A12900 12,900 .5079 124 60 77 3,0 45 14
4158387 TDG532A13000 13,000 .5118 124 60 77 3,0 45 14
4158388 TDG532A13096 13,096 .5156 124 60 77 3,1 45 14
4158389 TDG532A13100 13,100 .5157 124 60 77 3,1 45 14
WID_Master16_Holemaking_SolidCarbideDrills_T122_T123_Metric_REBRAND.indd 123 10/29/15 1:23 PM
T124
LViWID M 16 H l ki S lidC bid D ill T124 T125 M i REBRANDO b 15 20154 17PM
widia.com
WN10HD
(TDG532A • 5 x D — continued)
rst choice
alternate choice
Solid Carbide Drills
TOP DRILL G™ • Non-Ferrous Materials • 5 x D
Solid Carbide Drills
(continued)
D1 diameter
grade WN10HD
order # catalogue # mm in L L4 max L3 L5 LS D
4158390 TDG532A13200 13,200 .5197 124 60 77 3,1 45 14
4158391 TDG532A13300 13,300 .5236 124 60 77 3,1 45 14
4158392 TDG532A13400 13,400 .5276 124 60 77 3,1 45 14
4158448 TDG532A13490 13,490 .5311 124 60 77 3,1 45 14
4158393 TDG532A13500 13,500 .5315 124 60 77 3,1 45 14
4158394 TDG532A13600 13,600 .5354 124 60 77 3,2 45 14
4158395 TDG532A13700 13,700 .5394 124 60 77 3,2 45 14
4158396 TDG532A13800 13,800 .5433 124 60 77 3,2 45 14
4158397 TDG532A13891 13,891 .5469 124 60 77 3,2 45 14
4158398 TDG532A13900 13,900 .5472 124 60 77 3,2 45 14
4158399 TDG532A14000 14,000 .5512 124 60 77 3,3 45 14
4158400 TDG532A14100 14,100 .5551 133 63 83 3,3 48 16
4158401 TDG532A14200 14,200 .5591 133 63 83 3,3 48 16
4158402 TDG532A14288 14,288 .5625 133 63 83 3,3 48 16
4158403 TDG532A14300 14,300 .5630 133 63 83 3,3 48 16
4158404 TDG532A14400 14,400 .5669 133 63 83 3,4 48 16
4158405 TDG532A14500 14,500 .5709 133 63 83 3,4 48 16
4158406 TDG532A14600 14,600 .5748 133 63 83 3,4 48 16
4158407 TDG532A14684 14,684 .5781 133 63 83 3,4 48 16
4158408 TDG532A14700 14,700 .5787 133 63 83 3,4 48 16
4158409 TDG532A14800 14,800 .5827 133 63 83 3,5 48 16
4158410 TDG532A14900 14,900 .5866 133 63 83 3,5 48 16
4158411 TDG532A15000 15,000 .5906 133 63 83 3,5 48 16
4158412 TDG532A15083 15,083 .5938 133 63 83 3,5 48 16
4158413 TDG532A15100 15,100 .5945 133 63 83 3,5 48 16
4158414 TDG532A15200 15,200 .5984 133 63 83 3,5 48 16
4158415 TDG532A15300 15,300 .6024 133 63 83 3,6 48 16
4158416 TDG532A15400 15,400 .6063 133 63 83 3,6 48 16
4158417 TDG532A15479 15,479 .6094 133 63 83 3,6 48 16
4158418 TDG532A15500 15,500 .6102 133 63 83 3,6 48 16
4158419 TDG532A15600 15,600 .6142 133 63 83 3,6 48 16
4158420 TDG532A15700 15,700 .6181 133 63 83 3,7 48 16
4158421 TDG532A15800 15,800 .6220 133 63 83 3,7 48 16
4158422 TDG532A15875 15,875 .6250 133 63 83 3,7 48 16
4158423 TDG532A15900 15,900 .6260 133 63 83 3,7 48 16
4158424 TDG532A16000 16,000 .6299 133 63 83 3,7 48 16
4158425 TDG532A16100 16,100 .6339 143 71 93 3,8 48 18
4158426 TDG532A16200 16,200 .6378 143 71 93 3,8 48 18
4158427 TDG532A16271 16,271 .6406 143 71 93 3,8 48 18
4158428 TDG532A16300 16,300 .6417 143 71 93 3,8 48 18
WID_Master16_Holemaking_SolidCarbideDrills_T124_T125_Metric_REBRAND.indd 124 10/29/15 1:23 PM
T125
LViWID M 16 H l ki S lidC bid D ill T124 T125 M i REBRANDO b 1520154 17PM
widia.com
WN10HD
(TDG532A • 5 x D — continued)
(continued)
rst choice
alternate choice
Solid Carbide Drills
TOP DRILL G™ • Non-Ferrous Materials • 5 x D
Solid Carbide Drills
D1 diameter
grade WN10HD
order # catalogue # mm in L L4 max L3 L5 LS D
4158429 TDG532A16400 16,400 .6457 143 71 93 3,8 48 18
4158430 TDG532A16500 16,500 .6496 143 71 93 3,8 48 18
4158431 TDG532A16600 16,600 .6535 143 71 93 3,9 48 18
4158432 TDG532A16670 16,670 .6563 143 71 93 3,9 48 18
4158433 TDG532A16700 16,700 .6575 143 71 93 3,9 48 18
4158434 TDG532A16800 16,800 .6614 143 71 93 3,9 48 18
4158435 TDG532A16900 16,900 .6654 143 71 93 3,9 48 18
4158436 TDG532A17000 17,000 .6693 143 71 93 4,0 48 18
4158437 TDG532A17100 17,100 .6732 143 71 93 4,0 48 18
4158438 TDG532A17200 17,200 .6772 143 71 93 4,0 48 18
4158439 TDG532A17300 17,300 .6811 143 71 93 4,0 48 18
4158440 TDG532A17400 17,400 .6850 143 71 93 4,1 48 18
4158441 TDG532A17463 17,463 .6875 143 71 93 4,1 48 18
4158442 TDG532A17500 17,500 .6890 143 71 93 4,1 48 18
4158443 TDG532A17600 17,600 .6929 143 71 93 4,1 48 18
4158444 TDG532A17700 17,700 .6969 143 71 93 4,1 48 18
4158445 TDG532A17800 17,800 .7008 143 71 93 4,2 48 18
4158446 TDG532A17859 17,859 .7031 143 71 93 4,2 48 18
4158447 TDG532A17900 17,900 .7047 143 71 93 4,2 48 18
4158555 TDG532A18000 18,000 .7087 143 71 93 4,2 48 18
4158557 TDG532A18100 18,100 .7126 153 77 101 4,2 50 20
4158559 TDG532A18200 18,200 .7165 153 77 101 4,2 50 20
4158561 TDG532A18258 18,258 .7188 153 77 101 4,3 50 20
4158573 TDG532A18300 18,300 .7205 153 77 101 4,3 50 20
4158575 TDG532A18400 18,400 .7244 153 77 101 4,3 50 20
4158577 TDG532A18500 18,500 .7283 153 77 101 4,3 50 20
4158579 TDG532A18600 18,600 .7323 153 77 101 4,3 50 20
4158581 TDG532A18654 18,654 .7344 153 77 101 4,3 50 20
4158584 TDG532A18700 18,700 .7362 153 77 101 4,4 50 20
4158585 TDG532A18800 18,800 .7402 153 77 101 4,4 50 20
4158587 TDG532A18900 18,900 .7441 153 77 101 4,4 50 20
4158589 TDG532A19000 19,000 .7480 153 77 101 4,4 50 20
4158591 TDG532A19050 19,050 .7500 153 77 101 4,4 50 20
4158603 TDG532A19100 19,100 .7520 153 77 101 4,5 50 20
4158605 TDG532A19200 19,200 .7559 153 77 101 4,5 50 20
4158607 TDG532A19300 19,300 .7598 153 77 101 4,5 50 20
4158609 TDG532A19400 19,400 .7638 153 77 101 4,5 50 20
4158611 TDG532A19500 19,500 .7677 153 77 101 4,5 50 20
4158613 TDG532A19600 19,600 .7717 153 77 101 4,6 50 20
4158616 TDG532A19700 19,700 .7756 153 77 101 4,6 50 20
WID_Master16_Holemaking_SolidCarbideDrills_T124_T125_Metric_REBRAND.indd 125 10/29/15 1:23 PM
T126
LViWID M 16 H l ki S lidC bid D ill T126 T127 M i REBRANDO b 15 20154 18PM
widia.com
(TDG532A • 5 x D — continued)
WN10HD
Solid Carbide Drills
TOP DRILL G™ • Non-Ferrous Materials • 5 x D
Solid Carbide Drills
rst choice
alternate choice
D1 diameter
grade WN10HD
order # catalogue # mm in L L4 max L3 L5 LS D
4158618 TDG532A19800 19,800 .7795 153 77 101 4,6 50 20
4158620 TDG532A19900 19,900 .7835 153 77 101 4,6 50 20
4158622 TDG532A20000 20,000 .7874 153 77 101 4,7 50 20
4158634 TDG532A21000 21,000 .8268 167 85 114 4,9 50 20
4158636 TDG532A22000 22,000 .8661 167 85 114 5,1 50 20
4158637 TDG532A23000 23,000 .9055 184 98 126 5,4 56 25
WID_Master16_Holemaking_SolidCarbideDrills_T126_T127_Metric_REBRAND.indd 126 10/29/15 1:23 PM
T127
LViWID M 16 H l ki S lidC bid D ill T126 T127 M i REBRANDO b 1520154 18PM
widia.com
Solid Carbide Drills
TOP DRILL G™ • Non-Ferrous Materials • 8 x D
TDG533A • 8 x D
WN10HD
rst choice
alternate choice
(continued)
For information on L, L3, and L4 max, see page T143.
Solid Carbide Drills
D1 diameter
grade WN10HD
order # catalogue # mm in L L4 max L3 L5 LS D
4158475 TDG533A03000 3,000 .1181 78 33 40 0,7 36 6
4158476 TDG533A03048 3,048 .1200 78 33 40 0,7 36 6
4158477 TDG533A03100 3,100 .1220 78 33 40 0,7 36 6
4158478 TDG533A03175 3,175 .1250 78 33 40 0,7 36 6
4158479 TDG533A03200 3,200 .1260 78 33 40 0,7 36 6
4158480 TDG533A03264 3,264 .1285 78 33 40 0,8 36 6
4158481 TDG533A03300 3,300 .1299 78 33 40 0,8 36 6
4158482 TDG533A03400 3,400 .1339 78 33 40 0,8 36 6
4158553 TDG533A03455 3,455 .1360 78 33 40 0,8 36 6
4158554 TDG533A03500 3,500 .1378 78 33 40 0,8 36 6
4158556 TDG533A03571 3,571 .1406 78 33 40 0,8 36 6
4158558 TDG533A03600 3,600 .1417 78 33 40 0,8 36 6
4158560 TDG533A03658 3,658 .1440 78 33 40 0,9 36 6
4158562 TDG533A03700 3,700 .1457 78 33 40 0,9 36 6
4158574 TDG533A03734 3,734 .1470 78 33 40 0,9 36 6
4158576 TDG533A03800 3,800 .1496 87 41 49 0,9 36 6
4158578 TDG533A03900 3,900 .1535 87 41 49 0,9 36 6
4158580 TDG533A03970 3,970 .1563 87 41 49 0,9 36 6
4158582 TDG533A04000 4,000 .1575 87 41 49 0,9 36 6
4158583 TDG533A04039 4,039 .1590 87 41 49 0,9 36 6
4158586 TDG533A04090 4,090 .1610 87 41 49 1,0 36 6
4158588 TDG533A04100 4,100 .1614 87 41 49 1,0 36 6
4158590 TDG533A04200 4,200 .1654 87 41 49 1,0 36 6
4158592 TDG533A04217 4,217 .1660 87 41 49 1,0 36 6
WID_Master16_Holemaking_SolidCarbideDrills_T126_T127_Metric_REBRAND.indd 127 10/29/15 1:23 PM
T128
LViWID M 16 H l ki S lidC bid D ill T128 T129 M i REBRANDO b 15 20154 19PM
widia.com
WN10HD
(TDG533A • 8 x D — continued)
(continued)
rst choice
alternate choice
Solid Carbide Drills
TOP DRILL G™ • Non-Ferrous Materials • 8 x D
Solid Carbide Drills
D1 diameter
grade WN10HD
order # catalogue # mm in L L4 max L3 L5 LS D
4158604 TDG533A04300 4,300 .1693 87 41 49 1,0 36 6
4158606 TDG533A04366 4,366 .1719 87 41 49 1,0 36 6
4158608 TDG533A04400 4,400 .1732 87 41 49 1,0 36 6
4158610 TDG533A04500 4,500 .1772 87 41 49 1,0 36 6
4158612 TDG533A04600 4,600 .1811 87 41 49 1,1 36 6
4158614 TDG533A04623 4,623 .1820 87 41 49 1,1 36 6
4158615 TDG533A04700 4,700 .1850 87 41 49 1,1 36 6
4158617 TDG533A04763 4,763 .1875 94 48 56 1,1 36 6
4158619 TDG533A04800 4,800 .1890 94 48 56 1,1 36 6
4158621 TDG533A04852 4,852 .1910 94 48 56 1,1 36 6
4158633 TDG533A04900 4,900 .1929 94 48 56 1,1 36 6
4158635 TDG533A05000 5,000 .1969 94 48 56 1,2 36 6
4158638 TDG533A05100 5,100 .2008 94 48 56 1,2 36 6
4158639 TDG533A05106 5,106 .2010 94 48 56 1,2 36 6
4158640 TDG533A05159 5,159 .2031 94 48 56 1,2 36 6
4158641 TDG533A05200 5,200 .2047 94 48 56 1,2 36 6
4158642 TDG533A05300 5,300 .2087 94 48 56 1,2 36 6
4158653 TDG533A05400 5,400 .2126 94 48 56 1,3 36 6
4158654 TDG533A05410 5,410 .2130 94 48 56 1,3 36 6
4158655 TDG533A05500 5,500 .2165 94 48 56 1,3 36 6
4158656 TDG533A05558 5,558 .2188 94 48 56 1,3 36 6
4158657 TDG533A05600 5,600 .2205 94 48 56 1,3 36 6
4158658 TDG533A05616 5,616 .2211 94 48 56 1,3 36 6
4158659 TDG533A05700 5,700 .2244 94 48 56 1,3 36 6
4158660 TDG533A05800 5,800 .2283 94 48 56 1,4 36 6
4158661 TDG533A05900 5,900 .2323 94 48 56 1,4 36 6
4158662 TDG533A05954 5,954 .2344 94 48 56 1,4 36 6
4158673 TDG533A06000 6,000 .2362 94 48 56 1,4 36 6
4158674 TDG533A06100 6,100 .2402 105 57 67 1,4 36 8
4158675 TDG533A06200 6,200 .2441 105 57 67 1,4 36 8
4158676 TDG533A06300 6,300 .2480 105 57 67 1,5 36 8
4158677 TDG533A06350 6,350 .2500 105 57 67 1,5 36 8
4158678 TDG533A06400 6,400 .2520 105 57 67 1,5 36 8
4158679 TDG533A06500 6,500 .2559 105 57 67 1,5 36 8
4158680 TDG533A06528 6,528 .2570 105 57 67 1,5 36 8
4158681 TDG533A06600 6,600 .2598 105 57 67 1,5 36 8
4158682 TDG533A06630 6,630 .2610 105 57 67 1,5 36 8
4158693 TDG533A06700 6,700 .2638 105 57 67 1,6 36 8
4158694 TDG533A06746 6,746 .2656 105 57 67 1,6 36 8
4158695 TDG533A06800 6,800 .2677 105 57 67 1,6 36 8
WID_Master16_Holemaking_SolidCarbideDrills_T128_T129_Metric_REBRAND.indd 128 10/29/15 1:23 PM
T129
LViWID M 16 H l ki S lidC bid D ill T128 T129 M i REBRANDO b 1520154 19PM
widia.com
WN10HD
Solid Carbide Drills
(TDG533A • 8 x D — continued)
rst choice
alternate choice
(continued)
Solid Carbide Drills
TOP DRILL G™ • Non-Ferrous Materials • 8 x D
D1 diameter
grade WN10HD
order # catalogue # mm in L L4 max L3 L5 LS D
4158696 TDG533A06900 6,900 .2717 105 57 67 1,6 36 8
4158697 TDG533A07000 7,000 .2756 105 57 67 1,6 36 8
4158698 TDG533A07100 7,100 .2795 110 61 72 1,7 36 8
4158699 TDG533A07145 7,145 .2813 110 61 72 1,7 36 8
4158700 TDG533A07200 7,200 .2835 110 61 72 1,7 36 8
4158701 TDG533A07300 7,300 .2874 110 61 72 1,7 36 8
4158702 TDG533A07400 7,400 .2913 110 61 72 1,7 36 8
4158713 TDG533A07500 7,500 .2953 110 61 72 1,7 36 8
4158714 TDG533A07541 7,541 .2969 110 61 72 1,8 36 8
4158715 TDG533A07600 7,600 .2992 110 61 72 1,8 36 8
4158716 TDG533A07700 7,700 .3031 110 61 72 1,8 36 8
4158717 TDG533A07800 7,800 .3071 110 61 72 1,8 36 8
4158718 TDG533A07900 7,900 .3110 110 61 72 1,8 36 8
4158719 TDG533A07938 7,938 .3125 110 61 72 1,9 36 8
4158720 TDG533A08000 8,000 .3150 110 61 72 1,9 36 8
4158721 TDG533A08100 8,100 .3189 122 68 80 1,9 40 10
4158722 TDG533A08200 8,200 .3228 122 68 80 1,9 40 10
4158733 TDG533A08300 8,300 .3268 122 68 80 1,9 40 10
4158734 TDG533A08334 8,334 .3281 122 68 80 1,9 40 10
4158735 TDG533A08400 8,400 .3307 122 68 80 2,0 40 10
4158736 TDG533A08433 8,433 .3320 122 68 80 2,0 40 10
4158737 TDG533A08500 8,500 .3346 122 68 80 2,0 40 10
4158738 TDG533A08600 8,600 .3386 122 68 80 2,0 40 10
4158739 TDG533A08700 8,700 .3425 122 68 80 2,0 40 10
4158740 TDG533A08733 8,733 .3438 122 68 80 2,0 40 10
4158741 TDG533A08800 8,800 .3465 122 68 80 2,1 40 10
4158742 TDG533A08900 8,900 .3504 122 68 80 2,1 40 10
4158743 TDG533A09000 9,000 .3543 122 68 80 2,1 40 10
4158744 TDG533A09100 9,100 .3583 122 68 80 2,1 40 10
4158745 TDG533A09129 9,129 .3594 122 68 80 2,1 40 10
4158746 TDG533A09200 9,200 .3622 122 68 80 2,1 40 10
4158747 TDG533A09300 9,300 .3661 122 68 80 2,2 40 10
4158748 TDG533A09347 9,347 .3680 122 68 80 2,2 40 10
4158749 TDG533A09400 9,400 .3701 122 68 80 2,2 40 10
4158750 TDG533A09500 9,500 .3740 122 68 80 2,2 40 10
4158751 TDG533A09525 9,525 .3750 122 68 80 2,2 40 10
4158752 TDG533A09600 9,600 .3780 122 68 80 2,2 40 10
4158753 TDG533A09700 9,700 .3819 122 68 80 2,3 40 10
4158754 TDG533A09800 9,800 .3858 122 68 80 2,3 40 10
4158755 TDG533A09900 9,900 .3898 122 68 80 2,3 40 10
WID_Master16_Holemaking_SolidCarbideDrills_T128_T129_Metric_REBRAND.indd 129 10/29/15 1:23 PM
T130
LViWID M 16 H l ki S lidC bid D ill T130 T131 M i REBRANDO b 15 20154 21PM
widia.com
WN10HD
(TDG533A • 8 x D — continued)
(continued)
rst choice
alternate choice
Solid Carbide Drills
TOP DRILL G™ • Non-Ferrous Materials • 8 x D
Solid Carbide Drills
D1 diameter
grade WN10HD
order # catalogue # mm in L L4 max L3 L5 LS D
4158756 TDG533A09921 9,921 .3906 122 68 80 2,3 40 10
4158520 TDG533A10000 10,000 .3937 122 68 80 2,3 40 10
4158521 TDG533A10100 10,100 .3976 141 79 94 2,4 45 12
4158522 TDG533A10200 10,200 .4016 141 79 94 2,4 45 12
4158533 TDG533A10300 10,300 .4055 141 79 94 2,4 45 12
4158534 TDG533A10320 10,320 .4063 141 79 94 2,4 45 12
4158535 TDG533A10400 10,400 .4094 141 79 94 2,4 45 12
4158536 TDG533A10500 10,500 .4134 141 79 94 2,4 45 12
4158537 TDG533A10600 10,600 .4173 141 79 94 2,5 45 12
4158538 TDG533A10700 10,700 .4213 141 79 94 2,5 45 12
4158539 TDG533A10716 10,716 .4219 141 79 94 2,5 45 12
4158540 TDG533A10800 10,800 .4252 141 79 94 2,5 45 12
4158541 TDG533A10900 10,900 .4291 141 79 94 2,5 45 12
4158542 TDG533A11000 11,000 .4331 141 79 94 2,6 45 12
4158543 TDG533A11100 11,100 .4370 141 79 94 2,6 45 12
4158544 TDG533A11113 11,113 .4375 141 79 94 2,6 45 12
4158545 TDG533A11200 11,200 .4409 141 79 94 2,6 45 12
4158546 TDG533A11300 11,300 .4449 141 79 94 2,6 45 12
4158547 TDG533A11400 11,400 .4488 141 79 94 2,7 45 12
4158548 TDG533A11500 11,500 .4528 141 79 94 2,7 45 12
4158549 TDG533A11509 11,509 .4531 141 79 94 2,7 45 12
4158550 TDG533A11600 11,600 .4567 141 79 94 2,7 45 12
4158551 TDG533A11700 11,700 .4606 141 79 94 2,7 45 12
4158552 TDG533A11800 11,800 .4646 141 79 94 2,8 45 12
4158563 TDG533A11900 11,900 .4685 141 79 94 2,8 45 12
4158564 TDG533A11908 11,908 .4688 141 79 94 2,8 45 12
4158565 TDG533A12000 12,000 .4724 141 79 94 2,8 45 12
4158566 TDG533A12100 12,100 .4764 155 91 108 2,8 45 14
4158567 TDG533A12200 12,200 .4803 155 91 108 2,8 45 14
4158568 TDG533A12300 12,300 .4843 155 91 108 2,9 45 14
4158569 TDG533A12304 12,304 .4844 155 91 108 2,9 45 14
4158570 TDG533A12400 12,400 .4882 155 91 108 2,9 45 14
4158571 TDG533A12500 12,500 .4921 155 91 108 2,9 45 14
4158572 TDG533A12600 12,600 .4961 155 91 108 2,9 45 14
4158593 TDG533A12700 12,700 .5000 155 91 108 3,0 45 14
4158594 TDG533A12800 12,800 .5039 155 91 108 3,0 45 14
4158595 TDG533A12900 12,900 .5079 155 91 108 3,0 45 14
4158596 TDG533A13000 13,000 .5118 155 91 108 3,0 45 14
4158597 TDG533A13096 13,096 .5156 155 91 108 3,1 45 14
4158598 TDG533A13100 13,100 .5157 155 91 108 3,1 45 14
WID_Master16_Holemaking_SolidCarbideDrills_T130_T131_Metric_REBRAND.indd 130 10/29/15 1:23 PM
T131
LViWID M 16 H l ki S lidC bid D ill T130 T131 M i REBRANDO b 1520154 21PM
widia.com
WN10HD
Solid Carbide Drills
(TDG533A • 8 x D — continued)
rst choice
alternate choice
(continued)
Solid Carbide Drills
TOP DRILL G™ • Non-Ferrous Materials • 8 x D
D1 diameter
grade WN10HD
order # catalogue # mm in L L4 max L3 L5 LS D
4158599 TDG533A13200 13,200 .5197 155 91 108 3,1 45 14
4158600 TDG533A13300 13,300 .5236 155 91 108 3,1 45 14
4158601 TDG533A13400 13,400 .5276 155 91 108 3,1 45 14
4158727 TDG533A13490 13,490 .5311 155 91 108 3,1 45 14
4158602 TDG533A13500 13,500 .5315 155 91 108 3,1 45 14
4158623 TDG533A13600 13,600 .5354 155 91 108 3,2 45 14
4158624 TDG533A13700 13,700 .5394 155 91 108 3,2 45 14
4158625 TDG533A13800 13,800 .5433 155 91 108 3,2 45 14
4158626 TDG533A13891 13,891 .5469 155 91 108 3,2 45 14
4158627 TDG533A13900 13,900 .5472 155 91 108 3,2 45 14
4158628 TDG533A14000 14,000 .5512 155 91 108 3,3 45 14
4158629 TDG533A14100 14,100 .5551 171 101 121 3,3 48 16
4158630 TDG533A14200 14,200 .5591 171 101 121 3,3 48 16
4158631 TDG533A14288 14,288 .5625 171 101 121 3,3 48 16
4158632 TDG533A14300 14,300 .5630 171 101 121 3,3 48 16
4158643 TDG533A14400 14,400 .5669 171 101 121 3,4 48 16
4158644 TDG533A14500 14,500 .5709 171 101 121 3,4 48 16
4158645 TDG533A14600 14,600 .5748 171 101 121 3,4 48 16
4158646 TDG533A14684 14,684 .5781 171 101 121 3,4 48 16
4158647 TDG533A14700 14,700 .5787 171 101 121 3,4 48 16
4158648 TDG533A14800 14,800 .5827 171 101 121 3,5 48 16
4158649 TDG533A14900 14,900 .5866 171 101 121 3,5 48 16
4158650 TDG533A15000 15,000 .5906 171 101 121 3,5 48 16
4158651 TDG533A15083 15,083 .5938 171 101 121 3,5 48 16
4158652 TDG533A15100 15,100 .5945 171 101 121 3,5 48 16
4158663 TDG533A15200 15,200 .5984 171 101 121 3,5 48 16
4158664 TDG533A15300 15,300 .6024 171 101 121 3,6 48 16
4158665 TDG533A15400 15,400 .6063 171 101 121 3,6 48 16
4158666 TDG533A15479 15,479 .6094 171 101 121 3,6 48 16
4158667 TDG533A15500 15,500 .6102 171 101 121 3,6 48 16
4158668 TDG533A15600 15,600 .6142 171 101 121 3,6 48 16
4158669 TDG533A15700 15,700 .6181 171 101 121 3,7 48 16
4158670 TDG533A15800 15,800 .6220 171 101 121 3,7 48 16
4158671 TDG533A15875 15,875 .6250 171 101 121 3,7 48 16
4158672 TDG533A15900 15,900 .6260 171 101 121 3,7 48 16
4158683 TDG533A16000 16,000 .6299 171 101 121 3,7 48 16
4158684 TDG533A16100 16,100 .6339 185 113 135 3,8 48 18
4158685 TDG533A16200 16,200 .6378 185 113 135 3,8 48 18
4158686 TDG533A16271 16,271 .6406 185 113 135 3,8 48 18
4158687 TDG533A16300 16,300 .6417 185 113 135 3,8 48 18
WID_Master16_Holemaking_SolidCarbideDrills_T130_T131_Metric_REBRAND.indd 131 10/29/15 1:23 PM
T132
LViWID M 16 H l ki S lidC bid D ill T132 T133 M i REBRANDO b 15 20154 22PM
widia.com
WN10HD
Solid Carbide Drills
TOP DRILL G™ • Non-Ferrous Materials • 8 x D
Solid Carbide Drills
(TDG533A • 8 x D — continued)
rst choice
alternate choice
D1 diameter
grade WN10HD
order # catalogue # mm in L L4 max L3 L5 LS D
4158688 TDG533A16400 16,400 .6457 185 113 135 3,8 48 18
4158689 TDG533A16500 16,500 .6496 185 113 135 3,8 48 18
4158690 TDG533A16600 16,600 .6535 185 113 135 3,9 48 18
4158691 TDG533A16670 16,670 .6563 185 113 135 3,9 48 18
4158692 TDG533A16700 16,700 .6575 185 113 135 3,9 48 18
4158703 TDG533A16800 16,800 .6614 185 113 135 3,9 48 18
4158704 TDG533A16900 16,900 .6654 185 113 135 3,9 48 18
4158705 TDG533A17000 17,000 .6693 185 113 135 4,0 48 18
4158706 TDG533A17100 17,100 .6732 185 113 135 4,0 48 18
4158707 TDG533A17200 17,200 .6772 185 113 135 4,0 48 18
4158708 TDG533A17300 17,300 .6811 185 113 135 4,0 48 18
4158709 TDG533A17400 17,400 .6850 185 113 135 4,1 48 18
4158710 TDG533A17463 17,463 .6875 185 113 135 4,1 48 18
4158711 TDG533A17500 17,500 .6890 185 113 135 4,1 48 18
4158712 TDG533A17600 17,600 .6929 185 113 135 4,1 48 18
4158723 TDG533A17700 17,700 .6969 185 113 135 4,1 48 18
4158724 TDG533A17800 17,800 .7008 185 113 135 4,2 48 18
4158725 TDG533A17859 17,859 .7031 185 113 135 4,2 48 18
4158726 TDG533A17900 17,900 .7047 185 113 135 4,2 48 18
4157333 TDG533A18000 18,000 .7087 185 113 135 4,2 48 18
4157334 TDG533A18100 18,100 .7126 200 124 148 4,2 50 20
4157335 TDG533A18200 18,200 .7165 200 124 148 4,2 50 20
4157336 TDG533A18258 18,258 .7188 200 124 148 4,3 50 20
4157337 TDG533A18300 18,300 .7205 200 124 148 4,3 50 20
4157338 TDG533A18400 18,400 .7244 200 124 148 4,3 50 20
4157339 TDG533A18500 18,500 .7283 200 124 148 4,3 50 20
4157340 TDG533A18600 18,600 .7323 200 124 148 4,3 50 20
4157341 TDG533A18654 18,654 .7344 200 124 148 4,3 50 20
4157342 TDG533A18700 18,700 .7362 200 124 148 4,4 50 20
4157343 TDG533A18800 18,800 .7402 200 124 148 4,4 50 20
4157344 TDG533A18900 18,900 .7441 200 124 148 4,4 50 20
4157345 TDG533A19000 19,000 .7480 200 124 148 4,4 50 20
4157346 TDG533A19050 19,050 .7500 200 124 148 4,4 50 20
4157347 TDG533A19100 19,100 .7520 200 124 148 4,5 50 20
4157348 TDG533A19200 19,200 .7559 200 124 148 4,5 50 20
4157349 TDG533A19300 19,300 .7598 200 124 148 4,5 50 20
4157350 TDG533A19400 19,400 .7638 200 124 148 4,5 50 20
4157351 TDG533A19500 19,500 .7677 200 124 148 4,5 50 20
4157352 TDG533A19600 19,600 .7717 200 124 148 4,6 50 20
4157353 TDG533A19700 19,700 .7756 200 124 148 4,6 50 20
4157354 TDG533A19800 19,800 .7795 200 124 148 4,6 50 20
4157355 TDG533A19900 19,900 .7835 200 124 148 4,6 50 20
4157356 TDG533A20000 20,000 .7874 200 124 148 4,7 50 20
WID_Master16_Holemaking_SolidCarbideDrills_T132_T133_Metric_REBRAND.indd 132 10/29/15 1:23 PM
T133
LViWID M 16 H l ki S lidC bid D ill T132 T133 M i REBRANDO b 1520154 22PM
widia.com
Solid Carbide Drills
TOP DRILL G™ • Non-Ferrous Materials • 12 x D
TDG534A • 12 x D
WN10HD
rst choice
alternate choice
(continued)
For information on L, L3, and L4 max, see page T143.
Solid Carbide Drills
D1 diameter
grade WN10HD
order # catalogue # mm in L L4 max L3 L5 LS D
4157357 TDG534A03000 3,000 .1181 93 44 55 0,7 36 6
4157358 TDG534A03048 3,048 .1200 93 44 55 0,7 36 6
4157359 TDG534A03100 3,100 .1220 93 44 55 0,7 36 6
4157360 TDG534A03175 3,175 .1250 93 44 55 0,7 36 6
4157361 TDG534A03200 3,200 .1260 93 43 55 0,7 36 6
4157362 TDG534A03264 3,264 .1285 93 44 55 0,8 36 6
4157363 TDG534A03300 3,300 .1299 93 44 55 0,8 36 6
4157364 TDG534A03400 3,400 .1339 93 44 55 0,8 36 6
4157365 TDG534A03455 3,455 .1360 93 44 55 0,8 36 6
4157366 TDG534A03500 3,500 .1378 93 44 55 0,8 36 6
4157367 TDG534A03571 3,571 .1406 93 45 55 0,8 36 6
4157368 TDG534A03600 3,600 .1417 93 45 55 0,8 36 6
4157369 TDG534A03658 3,658 .1440 93 45 55 0,9 36 6
4157370 TDG534A03700 3,700 .1457 93 45 55 0,9 36 6
4157371 TDG534A03734 3,734 .1470 93 45 55 0,9 36 6
4157372 TDG534A03800 3,800 .1496 107 55 69 0,9 36 6
4157373 TDG534A03900 3,900 .1535 107 56 69 0,9 36 6
4157374 TDG534A03970 3,970 .1563 107 56 69 0,9 36 6
4157375 TDG534A04000 4,000 .1575 107 56 69 0,9 36 6
4157376 TDG534A04039 4,039 .1590 107 56 69 0,9 36 6
4157377 TDG534A04090 4,090 .1610 107 55 69 1,0 36 6
4157378 TDG534A04100 4,100 .1614 107 55 69 1,0 36 6
4157379 TDG534A04200 4,200 .1654 107 56 69 1,0 36 6
4157380 TDG534A04217 4,217 .1660 107 56 69 1,0 36 6
WID_Master16_Holemaking_SolidCarbideDrills_T132_T133_Metric_REBRAND.indd 133 10/29/15 1:24 PM
T134
LViWID M 16 H l ki S lidC bid D ill T134 T135 M i REBRANDO b 15 20154 22PM
widia.com
(TDG534A • 12 x D — continued)
(continued)
WN10HD
rst choice
alternate choice
Solid Carbide Drills
TOP DRILL G™ • Non-Ferrous Materials • 12 x D
Solid Carbide Drills
D1 diameter
grade WN10HD
order # catalogue # mm in L L4 max L3 L5 LS D
4157381 TDG534A04300 4,300 .1693 107 56 69 1,0 36 6
4157382 TDG534A04366 4,366 .1719 107 56 69 1,0 36 6
4157383 TDG534A04400 4,400 .1732 107 56 69 1,0 36 6
4157384 TDG534A04500 4,500 .1772 107 56 69 1,0 36 6
4157385 TDG534A04600 4,600 .1811 107 57 69 1,1 36 6
4157386 TDG534A04623 4,623 .1820 107 57 69 1,1 36 6
4157387 TDG534A04700 4,700 .1850 107 57 69 1,1 36 6
4157388 TDG534A04763 4,763 .1875 125 69 87 1,1 36 6
4157389 TDG534A04800 4,800 .1890 125 69 87 1,1 36 6
4157390 TDG534A04852 4,852 .1910 125 69 87 1,1 36 6
4157391 TDG534A04900 4,900 .1929 125 69 87 1,1 36 6
4157392 TDG534A05000 5,000 .1969 125 70 87 1,2 36 6
4157393 TDG534A05100 5,100 .2008 125 70 87 1,2 36 6
4157394 TDG534A05106 5,106 .2010 125 70 87 1,2 36 6
4157395 TDG534A05159 5,159 .2031 125 70 87 1,2 36 6
4157396 TDG534A05200 5,200 .2047 125 70 87 1,2 36 6
4157397 TDG534A05300 5,300 .2087 125 71 87 1,2 36 6
4157398 TDG534A05400 5,400 .2126 125 71 87 1,3 36 6
4157399 TDG534A05410 5,410 .2130 125 71 87 1,3 36 6
4157400 TDG534A05500 5,500 .2165 125 71 87 1,3 36 6
4157401 TDG534A05558 5,558 .2188 125 71 87 1,3 36 6
4157402 TDG534A05600 5,600 .2205 125 72 87 1,3 36 6
4157403 TDG534A05616 5,616 .2211 125 72 87 1,3 36 6
4157404 TDG534A05700 5,700 .2244 125 72 87 1,3 36 6
4157405 TDG534A05800 5,800 .2283 125 71 87 1,4 36 6
4157406 TDG534A05900 5,900 .2323 125 71 87 1,4 36 6
4157407 TDG534A05954 5,954 .2344 125 72 87 1,4 36 6
4157408 TDG534A06000 6,000 .2362 125 72 87 1,4 36 6
4157409 TDG534A06100 6,100 .2402 139 82 101 1,4 36 8
4157410 TDG534A06200 6,200 .2441 139 82 101 1,4 36 8
4157411 TDG534A06300 6,300 .2480 139 83 101 1,5 36 8
4157412 TDG534A06350 6,350 .2500 139 83 101 1,5 36 8
4157413 TDG534A06400 6,400 .2520 139 83 101 1,5 36 8
4157414 TDG534A06500 6,500 .2559 139 83 101 1,5 36 8
4157415 TDG534A06528 6,528 .2570 139 83 101 1,5 36 8
4157416 TDG534A06600 6,600 .2598 139 84 101 1,5 36 8
4157417 TDG534A06630 6,630 .2610 139 84 101 1,5 36 8
4157418 TDG534A06700 6,700 .2638 139 84 101 1,6 36 8
4157419 TDG534A06746 6,746 .2656 139 83 101 1,6 36 8
4157420 TDG534A06800 6,800 .2677 139 83 101 1,6 36 8
WID_Master16_Holemaking_SolidCarbideDrills_T134_T135_Metric_REBRAND.indd 134 10/29/15 1:24 PM
T135
LViWID M 16 H l ki S lidC bid D ill T134 T135 M i REBRANDO b 1520154 22PM
widia.com
Solid Carbide Drills
TOP DRILL G™ • Non-Ferrous Materials • 12 x D
Solid Carbide Drills
(TDG534A • 12 x D — continued)
(continued)
WN10HD
rst choice
alternate choice
D1 diameter
grade WN10HD
order # catalogue # mm in L L4 max L3 L5 LS D
4157421 TDG534A06900 6,900 .2717 139 83 101 1,6 36 8
4157422 TDG534A07000 7,000 .2756 139 84 101 1,6 36 8
4157423 TDG534A07100 7,100 .2795 153 94 115 1,7 36 8
4157424 TDG534A07145 7,145 .2813 153 94 115 1,7 36 8
4157425 TDG534A07200 7,200 .2835 153 94 115 1,7 36 8
4157426 TDG534A07300 7,300 .2874 153 95 115 1,7 36 8
4157427 TDG534A07400 7,400 .2913 153 95 115 1,7 36 8
4157428 TDG534A07500 7,500 .2953 153 95 115 1,7 36 8
4157429 TDG534A07541 7,541 .2969 153 95 115 1,8 36 8
4157430 TDG534A07600 7,600 .2992 153 96 115 1,8 36 8
4157431 TDG534A07700 7,700 .3031 153 96 115 1,8 36 8
4157432 TDG534A07800 7,800 .3071 153 95 115 1,8 36 8
4157433 TDG534A07900 7,900 .3110 153 95 115 1,8 36 8
4157434 TDG534A07938 7,938 .3125 153 96 115 1,9 36 8
4157435 TDG534A08000 8,000 .3150 153 96 115 1,9 36 8
4157436 TDG534A08100 8,100 .3189 185 116 143 1,9 40 10
4157437 TDG534A08200 8,200 .3228 185 116 143 1,9 40 10
4157438 TDG534A08300 8,300 .3268 185 117 143 1,9 40 10
4157439 TDG534A08334 8,334 .3281 185 117 143 1,9 40 10
4157440 TDG534A08400 8,400 .3307 185 117 143 2,0 40 10
4157441 TDG534A08433 8,433 .3320 185 117 143 2,0 40 10
4157442 TDG534A08500 8,500 .3346 185 117 143 2,0 40 10
4157443 TDG534A08600 8,600 .3386 185 118 143 2,0 40 10
4157444 TDG534A08700 8,700 .3425 185 118 143 2,0 40 10
4157445 TDG534A08733 8,733 .3438 185 117 143 2,0 40 10
4157446 TDG534A08800 8,800 .3465 185 117 143 2,1 40 10
4157447 TDG534A08900 8,900 .3504 185 117 143 2,1 40 10
4157448 TDG534A09000 9,000 .3543 185 118 143 2,1 40 10
4157449 TDG534A09100 9,100 .3583 185 118 143 2,1 40 10
4157450 TDG534A09129 9,129 .3594 185 118 143 2,1 40 10
4157451 TDG534A09200 9,200 .3622 185 118 143 2,1 40 10
4157452 TDG534A09300 9,300 .3661 185 119 143 2,2 40 10
4157453 TDG534A09347 9,347 .3680 185 119 143 2,2 40 10
4157454 TDG534A09400 9,400 .3701 185 119 143 2,2 40 10
4157455 TDG534A09500 9,500 .3740 185 119 143 2,2 40 10
4157456 TDG534A09525 9,525 .3750 185 119 143 2,2 40 10
4157457 TDG534A09600 9,600 .3780 185 120 143 2,2 40 10
4157458 TDG534A09700 9,700 .3819 185 120 143 2,3 40 10
4157459 TDG534A09800 9,800 .3858 185 119 143 2,3 40 10
4157460 TDG534A09900 9,900 .3898 185 119 143 2,3 40 10
WID_Master16_Holemaking_SolidCarbideDrills_T134_T135_Metric_REBRAND.indd 135 10/29/15 1:24 PM
T136
LViWID M 16 H l ki S lidC bid D ill T136 T137 M i REBRANDO b 15 20154 23PM
widia.com
Solid Carbide Drills
TOP DRILL G™ • Non-Ferrous Materials • 12 x D
(TDG534A • 12 x D — continued)
(continued)
Solid Carbide Drills
WN10HD
rst choice
alternate choice
D1 diameter
grade WN10HD
order # catalogue # mm in L L4 max L3 L5 LS D
4157461 TDG534A09921 9,921 .3906 185 120 143 2,3 40 10
4157476 TDG534A10000 10,000 .3937 185 120 143 2,3 40 10
4157555 TDG534A10100 10,100 .3976 218 140 171 2,4 45 12
4157556 TDG534A10200 10,200 .4016 218 140 171 2,4 45 12
4157557 TDG534A10300 10,300 .4055 218 141 171 2,4 45 12
4157558 TDG534A10320 10,320 .4063 218 141 171 2,4 45 12
4157559 TDG534A10400 10,400 .4094 218 141 171 2,4 45 12
4157560 TDG534A10500 10,500 .4134 218 141 171 2,4 45 12
4157561 TDG534A10600 10,600 .4173 218 142 171 2,5 45 12
4157562 TDG534A10700 10,700 .4213 218 142 171 2,5 45 12
4157583 TDG534A10716 10,716 .4219 218 142 171 2,5 45 12
4157584 TDG534A10800 10,800 .4252 218 141 171 2,5 45 12
4157585 TDG534A10900 10,900 .4291 218 141 171 2,5 45 12
4157586 TDG534A11000 11,000 .4331 218 142 171 2,6 45 12
4157587 TDG534A11100 11,100 .4370 218 142 171 2,6 45 12
4157588 TDG534A11113 11,113 .4375 218 142 171 2,6 45 12
4157589 TDG534A11200 11,200 .4409 218 142 171 2,6 45 12
4157590 TDG534A11300 11,300 .4449 218 143 171 2,6 45 12
4157591 TDG534A11400 11,400 .4488 218 143 171 2,7 45 12
4157592 TDG534A11500 11,500 .4528 218 143 171 2,7 45 12
4157593 TDG534A11509 11,509 .4531 218 143 171 2,7 45 12
4157594 TDG534A11600 11,600 .4567 218 144 171 2,7 45 12
4157595 TDG534A11700 11,700 .4606 218 144 171 2,7 45 12
4157596 TDG534A11800 11,800 .4646 218 143 171 2,8 45 12
4157597 TDG534A11900 11,900 .4685 218 143 171 2,8 45 12
4157598 TDG534A11908 11,908 .4688 218 143 171 2,8 45 12
4157599 TDG534A12000 12,000 .4724 218 144 171 2,8 45 12
4157600 TDG534A12100 12,100 .4764 246 164 199 2,8 45 14
4157601 TDG534A12200 12,200 .4803 246 164 199 2,8 45 14
4157602 TDG534A12300 12,300 .4843 246 165 199 2,9 45 14
4157603 TDG534A12304 12,304 .4844 246 165 199 2,9 45 14
4157604 TDG534A12400 12,400 .4882 246 165 199 2,9 45 14
4157605 TDG534A12500 12,500 .4921 246 165 199 2,9 45 14
4157606 TDG534A12600 12,600 .4961 246 165 199 2,9 45 14
4157607 TDG534A12700 12,700 .5000 246 166 199 3,0 45 14
4157608 TDG534A12800 12,800 .5039 246 166 199 3,0 45 14
4157609 TDG534A12900 12,900 .5079 246 165 199 3,0 45 14
4157610 TDG534A13000 13,000 .5118 246 166 199 3,0 45 14
4157611 TDG534A13096 13,096 .5156 246 166 199 3,1 45 14
4157612 TDG534A13100 13,100 .5157 246 166 199 3,1 45 14
WID_Master16_Holemaking_SolidCarbideDrills_T136_T137_Metric_REBRAND.indd 136 10/29/15 1:24 PM
T137
LViWID M 16 H l ki S lidC bid D ill T136 T137 M i REBRANDO b 1520154 23PM
widia.com
Solid Carbide Drills
Solid Carbide Drills
TOP DRILL G™ • Non-Ferrous Materials • 12 x D
rst choice
alternate choice
(TDG534A • 12 x D — continued)
(continued)
WN10HD
D1 diameter
grade WN10HD
order # catalogue # mm in L L4 max L3 L5 LS D
4157613 TDG534A13200 13,200 .5197 246 166 199 3,1 45 14
4157614 TDG534A13300 13,300 .5236 246 167 199 3,1 45 14
4157615 TDG534A13400 13,400 .5276 246 167 199 3,1 45 14
4157671 TDG534A13490 13,490 .5311 246 167 199 3,1 45 14
4157616 TDG534A13500 13,500 .5315 246 167 199 3,1 45 14
4157617 TDG534A13600 13,600 .5354 246 167 199 3,2 45 14
4157618 TDG534A13700 13,700 .5394 246 168 199 3,2 45 14
4157619 TDG534A13800 13,800 .5433 246 168 199 3,2 45 14
4157620 TDG534A13891 13,891 .5469 246 167 199 3,2 45 14
4157621 TDG534A13900 13,900 .5472 246 167 199 3,2 45 14
4157622 TDG534A14000 14,000 .5512 246 168 199 3,3 45 14
4157623 TDG534A14100 14,100 .5551 277 188 227 3,3 48 16
4157624 TDG534A14200 14,200 .5591 277 188 227 3,3 48 16
4157625 TDG534A14288 14,288 .5625 277 188 227 3,3 48 16
4157626 TDG534A14300 14,300 .5630 277 188 227 3,3 48 16
4157627 TDG534A14400 14,400 .5669 277 189 227 3,4 48 16
4157628 TDG534A14500 14,500 .5709 277 189 227 3,4 48 16
4157629 TDG534A14600 14,600 .5748 277 189 227 3,4 48 16
4157630 TDG534A14684 14,684 .5781 277 190 227 3,4 48 16
4157631 TDG534A14700 14,700 .5787 277 190 227 3,4 48 16
4157632 TDG534A14800 14,800 .5827 277 190 227 3,5 48 16
4157633 TDG534A14900 14,900 .5866 277 190 227 3,5 48 16
4157634 TDG534A15000 15,000 .5906 277 190 227 3,5 48 16
4157635 TDG534A15083 15,083 .5938 277 190 227 3,5 48 16
4157636 TDG534A15100 15,100 .5945 277 190 227 3,5 48 16
4157637 TDG534A15200 15,200 .5984 277 190 227 3,5 48 16
4157638 TDG534A15300 15,300 .6024 277 191 227 3,6 48 16
4157639 TDG534A15400 15,400 .6063 277 191 227 3,6 48 16
4157640 TDG534A15479 15,479 .6094 277 191 227 3,6 48 16
4157641 TDG534A15500 15,500 .6102 277 191 227 3,6 48 16
4157642 TDG534A15600 15,600 .6142 277 191 227 3,6 48 16
4157643 TDG534A15700 15,700 .6181 277 192 227 3,7 48 16
4157644 TDG534A15800 15,800 .6220 277 192 227 3,7 48 16
4157645 TDG534A15875 15,875 .6250 277 192 227 3,7 48 16
4157646 TDG534A15900 15,900 .6260 277 192 227 3,7 48 16
4157647 TDG534A16000 16,000 .6299 277 192 227 3,7 48 16
4157648 TDG534A16100 16,100 .6339 305 212 255 3,8 48 18
4157649 TDG534A16200 16,200 .6378 305 212 255 3,8 48 18
4157650 TDG534A16271 16,271 .6406 305 212 255 3,8 48 18
4157651 TDG534A16300 16,300 .6417 305 212 255 3,8 48 18
WID_Master16_Holemaking_SolidCarbideDrills_T136_T137_Metric_REBRAND.indd 137 10/29/15 1:24 PM
T138
LViWID M 16 H l ki S lidC bid D ill T138 T139 M i REBRANDO b 15 20154 24PM
widia.com
Solid Carbide Drills
TOP DRILL G™ • Non-Ferrous Materials • 12 x D
(TDG534A • 12 x D — continued)
Solid Carbide Drills
WN10HD
rst choice
alternate choice
D1 diameter
grade WN10HD
order # catalogue # mm in L L4 max L3 L5 LS D
4157652 TDG534A16400 16,400 .6457 305 213 255 3,8 48 18
4157653 TDG534A16500 16,500 .6496 305 213 255 3,8 48 18
4157654 TDG534A16600 16,600 .6535 305 213 255 3,9 48 18
4157655 TDG534A16670 16,670 .6563 305 214 255 3,9 48 18
4157656 TDG534A16700 16,700 .6575 305 214 255 3,9 48 18
4157657 TDG534A16800 16,800 .6614 305 214 255 3,9 48 18
4157658 TDG534A16900 16,900 .6654 305 214 255 3,9 48 18
4157659 TDG534A17000 17,000 .6693 305 214 255 4,0 48 18
4157660 TDG534A17100 17,100 .6732 305 214 255 4,0 48 18
4157661 TDG534A17200 17,200 .6772 305 214 255 4,0 48 18
4157662 TDG534A17300 17,300 .6811 305 214 255 4,0 48 18
4157663 TDG534A17400 17,400 .6850 305 215 255 4,1 48 18
4157664 TDG534A17463 17,463 .6875 305 215 255 4,1 48 18
4157665 TDG534A17500 17,500 .6890 305 215 255 4,1 48 18
4157666 TDG534A17600 17,600 .6929 305 215 255 4,1 48 18
4157667 TDG534A17700 17,700 .6969 305 216 255 4,1 48 18
4157668 TDG534A17800 17,800 .7008 305 216 255 4,2 48 18
4157669 TDG534A17859 17,859 .7031 305 216 255 4,2 48 18
4157670 TDG534A17900 17,900 .7047 305 216 255 4,2 48 18
4156877 TDG534A18000 18,000 .7087 305 216 255 4,2 48 18
4156878 TDG534A18100 18,100 .7126 334 237 282 4,2 50 20
4156879 TDG534A18200 18,200 .7165 334 236 282 4,2 50 20
4156880 TDG534A18258 18,258 .7188 334 236 282 4,3 50 20
4156881 TDG534A18300 18,300 .7205 334 236 282 4,3 50 20
4156882 TDG534A18400 18,400 .7244 334 237 282 4,3 50 20
4156973 TDG534A18500 18,500 .7283 334 237 282 4,3 50 20
4156974 TDG534A18600 18,600 .7323 334 237 282 4,3 50 20
4156975 TDG534A18654 18,654 .7344 334 237 282 4,3 50 20
4156976 TDG534A18700 18,700 .7362 334 237 282 4,4 50 20
4156977 TDG534A18800 18,800 .7402 334 238 282 4,4 50 20
4156978 TDG534A18900 18,900 .7441 334 238 282 4,4 50 20
4156979 TDG534A19000 19,000 .7480 334 238 282 4,4 50 20
4156980 TDG534A19050 19,050 .7500 334 239 282 4,4 50 20
4156981 TDG534A19100 19,100 .7520 334 239 282 4,5 50 20
4156982 TDG534A19200 19,200 .7559 334 238 282 4,5 50 20
4156983 TDG534A19300 19,300 .7598 334 238 282 4,5 50 20
4156984 TDG534A19400 19,400 .7638 334 239 282 4,5 50 20
4156985 TDG534A19500 19,500 .7677 334 239 282 4,5 50 20
4156986 TDG534A19600 19,600 .7717 334 239 282 4,6 50 20
4156987 TDG534A19700 19,700 .7756 334 239 282 4,6 50 20
4156988 TDG534A19800 19,800 .7795 334 240 282 4,6 50 20
4156989 TDG534A19900 19,900 .7835 334 240 282 4,6 50 20
4156990 TDG534A20000 20,000 .7874 334 240 282 4,7 50 20
WID_Master16_Holemaking_SolidCarbideDrills_T138_T139_Metric_REBRAND.indd 138 10/29/15 1:24 PM
T139
LViWID M 16 H l ki S lidC bid D ill T138 T139 M i REBRANDO b 1520154 24PM
widia.com
Solid Carbide Drills
Application Data • TOP DRILL G™ • Non-Ferrous Materials
TOP DRILL G • TDG532/TDG533/TDG534 • WN10HD
™
• Through Coolant • Metric
Material
Group
Cutting Speed
— vc Recommended Feed Rate (f) by Diameter
Range — m/min
min – min
Tool Diameter
(mm) 3,0 4,0 6,0 8,0 10,0 12,0 16,0 20,0
N
21
100 – 450 mm/r 0,16–0,25 0,19–0,29 0,23–0,35 0,27–0,42 0,31–0,50 0,36–0,57 0,44–0,69 0,52–0,82
22, 23, 24
100 – 300 mm/r 0,15–0,23 0,17–0,28 0,21–0,34 0,25–0,39 0,30–0,46 0,34–0,54 0,42–0,67 0,52–0,82
26
100 – 250 mm/r 0,16–0,28 0,15–0,32 0,19–0,36 0,23–0,40 0,25–0,44 0,28–0,48 0,32–0,56 0,35–0,63
Solid Carbide Drills
Metric
tolerance
nominal size range D1 tolerance m7 D tolerance h6
>3–6 0,004/0,016 0,000/-0,008
>6–10 0,006/0,021 0,000/-0,009
>10–18 0,007/0,025 0,000/-0,011
>18–25,4 0,008/0,029 0,000/-0,013
WID_Master16_Holemaking_SolidCarbideDrills_T138_T139_Metric_REBRAND.indd 139 10/29/15 1:24 PM
widia.com
T140
LViWID M 16 H l ki S lidC bid D ill T140 T141 M i REBRANDN b 10 20153 20PM
WIDIA Reconditioning Services optimise the value of metalcutting tools throughout their
entire lifecycle by giving like-new performance — with rapid turnaround time — so tools
are always on hand and perform just like new.
How Does WIDIA Do It?
• Reconditioned tooling undergoes the same process as new tools —
the same drill point (WIDIA proprietary geometry) and coating are applied back on the tool.
• Tooling is returned to like-new condition, with WIDIA proprietary geometry providing a longer
tooling lifecycle and increased performance.
• With current lead-time less than 10 days, customers get tools back quickly
— lowering cost-per-tool usage.
WIDIA™ Solid Carbide Drills —
Reconditioning
Anyone can regrind your tools — only we can recondition them.
WID_Master16_Holemaking_SolidCarbideDrills_T140_T141_Metric_REBRAND.indd 140 11/10/15 5:03 PM
LViWID M 16 H l ki S lidC bid D ill T140 T141 M i REBRANDN b 1020153 20PM
Protect your
investment by
using the WIDIA™
Reconditioning
Programme.
WIDIA Solid Carbide Drills
Reconditioning Product Lines.
• VariDrill™
• TOP DRILL S™ for Steel
• TOP DRILL S™ for Cast Iron
• TOP DRILL S+™
• TOP DRILL G™
To use WIDIA tool reconditioning services, contact
your authorised WIDIA distributor to get started.
WID_Master16_Holemaking_SolidCarbideDrills_T140_T141_Metric_REBRAND.indd 141 11/10/15 5:03 PM
T142
LViWID M 16 H l ki S lidC bid D ill T142 T143 M i REBRANDN b 12 20159 52AM
widia.com
Solid Carbide Drills
The Anatomy of a Drill
Use this diagram when describing features of a solid carbide drill.
Use this diagram when describing features of a solid carbide step drill.
The Anatomy of a Drill
Point Angle
(Y)
Point Angle
(Y)
Diameter
(D1)
Diameter
(D1)
Point Length
(L5)
Point Length
(L5)
Max Drill Depth
(L4 max)
Flute Length
(L3)
Shank Length
(LS)
Shank Length
(LS)
Overall Length
(L)
Overall Length
(L)
Shank Diameter
(D)
Shank Diameter
(D)
Chamfer Angle
(Y2)
Drill Depth
before Chamfer
(SDL1)
WID_Master16_Holemaking_SolidCarbideDrills_T142_T143_Metric_REBRAND.indd 142 11/12/15 12:03 PM
T143
LViWID M 16 H l ki S lidC bid D ill T142 T143 M i REBRANDN b 1220159 52AM
widia.com
Solid Carbide Drills
General Application Instructions
High-performance solid carbide drills with tolerances of m7 create holes with
tolerances of H9. H8 can be achieved in very good conditions. The drill should
be used for holes in H8, and in favourable conditions, H7 can be achieved.
Solid carbide drills with H7 create holes in K9–K11. Other drilling tolerances
require special solid carbide drill versions.
Tolerances of diameter D1 on:
Spiral Flute
TDG Drill
Shank Designs to DIN 6535
Dimensions for WIDIA
™
High-Performance Solid Carbide Drills
Tolerances of Drills and Holes
+5
+10
+15
+20
+25
+30
+35
+40
+45
+50
0
m7
m7
m7
m7
H7
H8
H9
k6
k6
H7
H8
H9
k6
H8
H9
H7
H7
H8
H9
k6
+55
μm
3<D ≤66<D
≤ 10 10<D ≤ 18 18<D ≤ 30
mm
ØDIN 6535 SHORT*
~3 x D
LONG*
~5 x D
EXTRA LONG**
~8 x D
D1 min D1 max D LS L L3 L4 max L L3 L4 max L L3 L4 max
1,000 1,400 4 28 58 7 5 58 9 6 58 12 10
1,401 1,900 4 28 58 9 6 58 12 9 58 18 15
1,901 2,300 4 28 58 13 9 58 18 14 66 26 22
2,301 2,999 4 28 58 17 12 58 22 17 66 30 25
3,000 3,750 6 36 62 20 14 66 28 23 78 40 33
3,751 4,750 6 36 66 24 17 74 36 29 87 49 41
4,751 6,000 6 36 66 28 20 82 44 35 94 56 48
6,001 7,000 8 36 79 34 24 91 53 43 105 67 57
7,001 8,000 8 36 79 41 29 91 53 43 110 72 61
8,001 10,000 10 40 89 47 35 103 61 49 122 80 68
10,001 12,000 12 45 102 55 40 118 71 56 141 94 79
12,001 14,000 14 45 107 60 43 124 77 60 155 108 91
14,001 16,000 16 48 115 65 45 133 83 63 171 121 101
16,001 18,000 18 48 123 73 51 143 93 71 185 135 113
18,001 20,000 20 50 131 79 55 153 101 77 200 148 124
20,001 22,000 20 50 141 86 60 167 112 85 217 162 136
22,001 25,000 25 56 153 95 65 184 126 98 238 180 150
Form HE,
2° angle
Design F
Form HA,
straight
design A
* D1<20mm to DIN 6537K
D1>20mm to factory standard
** To factory standard
NOTE: Solid Carbide Drills from WIDIA in short and regular lengths conform to DIN 6537.
Drills with long lengths conform to WIDIA factory standard.
Solid Carbide Drills with diameter D1>20mm (not DIN 6537) are also standardised to factory standard.
WID_Master16_Holemaking_SolidCarbideDrills_T142_T143_Metric_REBRAND.indd 143 11/12/15 12:03 PM
T144
LViWID M 16 H l ki S lidC bid D ill T144 T145 M i REBRANDO b 15 20154 26PM
widia.com
Solid Carbide Drills
General Application Instructions
Toolholding Systems
As with any drilling system, components of the entire system contribute to the quality of the machined hole, not just the drill itself.
For maximum ef ciency and accuracy, the following toolholding systems are your best choices:
First Choice
Hydraulic chucks
Second Choice
Shrink Fit
Third Choice
High-performance milling chucks
with reduction sleeves
Not Recommended Clamping Chuck
Use of all-purpose drilling chuck collets,
clamping sleeves, and Weldon
®
clamping
chucks should be avoided because they
do not absorb cutting forces reliably and
provide insuf cient precision of concentricity.
Highly Recommended
Hydraulic chucks ensure a secure torque
transmission with excellent concentricity.
Not Recommended Machine
Solid carbide drills have a much higher rigidity
than conventional high-speed steel drills. This
enables the machining of close-tolerance holes
with a position accuracy of ±0.025mm. However,
it also means that drills require rigid machine
tools with good spindles.
Rigid Machine Tool Recommended
(continued)
[
[
WID_Master16_Holemaking_SolidCarbideDrills_T144_T145_Metric_REBRAND.indd 144 10/29/15 1:24 PM
T145
LViWID M 16 H l ki S lidC bid D ill T144 T145 M i REBRANDO b 1520154 26PM
widia.com
Solid Carbide Drills
General Application Instructions
Wrong Drilling and Chamfering
Drill into the solid rst, then chamfer.
Correct
Wrong Drilling on Inclined or Rounded Surfaces
When drilling on inclined or curved surfaces, use a lower
feed than the standard value. The reduction of feed
required is dependent on the inclination angle of the
workpiece surface and the drill type (see table).
Correct
Premachining is usually done with an end mill operation.
Wrong Drilling on Turning Machines
When drilling on turning machines, the drill must be on
centre. The tolerance range of the centre position should
not exceed ±0.025mm. On bar-turning lathes, do not drill
into centre stub or bur. Cut-off tools must be mounted
precisely to eliminate centre stub or bur. Do not drill into
pre-existing holes.
Hole Depths Greater than 3 x D
Hole depths that are deeper than three times the
drill diameter may require a speed reduction. A
15% lower speed is suggested.
(continued)
>1°
chamfer tool
100% feed
100% feed
no premachine
reduced feed
premachine
0,025mm
reduced feed (% of standard value)
inclination
_3 x D
5 x D
Long <5 x D
1° 100% 80% premachine
2° 80–50% 80–50% premachine
3° 65% 50% premachine
4° 50% premachine premachine
6° 30% premachine premachine
[
[
[
WID_Master16_Holemaking_SolidCarbideDrills_T144_T145_Metric_REBRAND.indd 145 10/29/15 1:24 PM
T146
LViWID M 16 H l ki S lidC bid D ill T146 T147 M i REBRANDO b 15 20154 27PM
widia.com
Solid Carbide Drills
General Application Instructions
Coolant
• To optimise their performance, drills must be adequately cooled. With the
proper coolant ow, better tool life and higher maximum effective cutting
speeds can be achieved.
• If not properly cooled, the drill will heat up rapidly. This causes the drill
diameter to expand, which in turn may cause the drill to seize inside
the hole.
• Solid carbide drills with internal coolant channels require deeper drilling
depths to be effective. The higher the coolant pressure, the better the
drilling results. Drill life and hole quality improve with ample coolant ow.
• When using drills without internal coolant ow, try to get at least one
coolant jet as parallel to the drill as possible.
• For short-hole applications, drills without internal coolant may often provide
better tool life. The tool is more solid, and it does not suffer from thermal
shock at the cutting edge.
• It is important to use high coolant concentration to provide lubricity, which
will aid in tool life, chip evacuation, and ner surface nishes.
• High-pressure coolant, either through the tool or through a line adjacent
and parallel to the tool, should always be considered for increased tool life
and production.
• Do not use multi-coolant lines. Use one line with 100% of the ow capacity
to evacuate the chips from the hole.
Coolant requirement for carbide drills
Recommended pressure
drill diameter
length-to-diameter ratio
internal coolant only
high-pressure ood coolant
ood
Recommended pressure
drill diameter
coolant pressure (PSI)
favourable pressure values
coolant pressure too low
drill diameter
drill diameter
Recommended coolant pressure p [bar]
straight ute
spiral ute
Recommended coolant ow volume V [l/min]
straight ute
spiral ute
Because solid carbide drills have much higher penetration rates, it is important that the workpiece has adequate support.
Workpiece Rigidity
incorrect correct
WID_Master16_Holemaking_SolidCarbideDrills_T146_T147_Metric_REBRAND.indd 146 10/29/15 1:24 PM
T147
LViWID M 16 H l ki S lidC bid D ill T146 T147 M i REBRANDO b 1520154 27PM
widia.com
Solid Carbide Drills
General Application Instructions
problem source solution
heavy wear on the cutting corners insuffi cient coolant • Check cooling lubricant. In the case of internal coolant supply,
increase coolant pressure. In the case of external coolant supply,
adjust positioning of coolant jet. Cool from both sides.
workpiece movement • Stabilise workpiece chucking and check stability of machine tool.
wrong drill • Check drill type, drilling depth, cooling system,
and workpiece material.
cutting conditions • Reduce cutting speed; increase feed.
splintering on the chisel edge clamping chuck • Check clamping accuracy. Use hydraulic clamping
chuck or high-precision chucking system.
cutting conditions • Decrease feed; increase speed.
built-up edge insuffi cient coolant • Check cooling lubricant. In the case of internal coolant supply,
increase coolant pressure. In the case of external coolant supply,
adjust positioning of coolant jet. Cool from both sides.
cutting conditions • Increase speed 20–30%.
splintering on the cutting edges clamping chuck • Check clamping accuracy and torque transmission. Use hydraulic
clamping chuck or high-precision chucking system.
cutting conditions caused
by built-up edge
• Check cutting values, and possibly increase cutting speed.
• Examine regularly for built-up edge.
thermal checking/comb cracking cutting conditions •Adapt coolant and cutting conditions to reduce thermal shock.
WID_Master16_Holemaking_SolidCarbideDrills_T146_T147_Metric_REBRAND.indd 147 10/29/15 1:24 PM
T148
LViWID M 16 H l ki S lidC bid D ill T148 T149 M i REBRANDO b 15 20154 27PM
widia.com
Solid Carbide Drills
problem source solution
hole too big cutting conditions • Check cutting values, increase cutting speed, or reduce feed.
clamping chuck • Check clamping accuracy and torque transmission. Use hydraulic
clamping chuck or high-precision chucking system.
wrong drill • Check drill diameter. Please note that drills are ground to a positive
tolerance. Check concentric running.
hole too small insuffi cient coolant • Check cooling lubricant. In the case of internal coolant supply,
increase coolant pressure. In the case of external coolant supply,
adjust positioning of coolant jet. Cool from both sides.
cutting conditions • Decrease feed; increase speed.
wrong drill •Check cutting-edge diameter.
hole not cylindrical clamping chuck • Check clamping accuracy and torque transmission. Use hydraulic
clamping chuck or high-precision chucking system.
workpiece movement • Stabilise workpiece chucking and check stability of machine tool.
wrong drill • Check drill type and drilling depth.
Use longer drills.
cutting conditions • Reduce feed at entry.
Troubleshooting Guide
WID_Master16_Holemaking_SolidCarbideDrills_T148_T149_Metric_REBRAND.indd 148 10/29/15 1:24 PM
T149
LViWID M 16 H l ki S lidC bid D ill T148 T149 M i REBRANDO b 1520154 27PM
widia.com
Solid Carbide Drills
Troubleshooting Guide
problem source solution
drill breakage clamping chuck • Check clamping accuracy and torque transmission. Use hydraulic
clamping chuck or high-precision chucking system.
workpiece movement • Stabilise workpiece chucking and check stability of machine tool.
wrong drill • Check drill type, drilling depth, cooling system,
and workpiece material.
insuffi cient coolant • Check cooling lubricant. In the case of internal coolant supply,
increase coolant pressure. In the case of external coolant supply,
adjust positioning of coolant jet. Cool from both sides.
cutting conditions • Check cutting values, and possibly reduce feed.
clamping chuck • Check torque transmission. Use hydraulic clamping chuck
or high-precision chucking system.
splintering on the cutting corners workpiece movement • Stabilise workpiece chucking and check stability of machine tool.
wrong drill • Check drill type, drilling depth, cooling system, and workpiece material.
Possibly use longer drill.
insuffi cient coolant • Check cooling lubricant. In the case of internal coolant supply,
increase coolant pressure. In the case of external coolant supply,
adjust positioning of coolant jet. Cool from both sides.
cutting conditions • Check cutting values, and possibly reduce feed.
WID_Master16_Holemaking_SolidCarbideDrills_T148_T149_Metric_REBRAND.indd 149 10/29/15 1:24 PM
NOVO KNOWS
ART TO PART TO PROFIT
Being as productive and profi table as
possible is your fundamental goal. With
the addition of NOVO™ to your team, your
goal can be achieved. NOVO possesses
powerful digital tools that link together
process planning, inventory availability
and purchase, cost-per-part management,
and productivity improvements.
NOVO can ensure you have the right tools
on your machines, in the right sequence.
Resulting in fl awless execution that
accelerates every job, and maximises
every shift.
WID_Master16_Holemaking_SolidCarbideDrills_T150_T151_Metric_REBRAND.indd 4 10/29/15 1:24 PM
WID_Master16_Holemaking_SolidCarbideDrills_T150_T151_Metric_REBRAND.indd 5 10/29/15 1:24 PM
LViWID M 16 H l ki M d l D ill U000 U001 M i REBRANDD b 14 20152 35PM
WID_Master16_Holemaking_ModularDrills_U000_U001_Metric_REBRAND.indd 1 12/14/15 2:41 PM
U1
LViWID M 16 H l ki M d l D ill U000 U001 M i REBRANDD b 1420152 35PM
widia.com
Holemaking • Modular Drills
Introduction .......................................................................................................................................................... U2–U3
TOP DRILL M1 ................................................................................................................................................... U4–U24
Spade Blades ................................................................................................................................................... U26–U45
WID_Master16_Holemaking_ModularDrills_U000_U001_Metric_REBRAND.indd 1 12/14/15 2:41 PM
U2
LViWID M 16 H l ki M d l D ill U002 U003 M i REBRANDN b 12 20159 53AM
widia.com
Modular Drills
Tool Selection Guide
modular drills
with internal
coolant channel grade/series
standard* standard range
first choice
alternate choice diameter range
PMKNSH
hole
tolerance
D1 mm
min–max
D1 inch
min–max
drilling depth
L/D1
* Apart from our standard drills, we can offer you a wide variety of special coating solutions and edge preparations to fulfill all your needs.
If a specific drill is not suitable for your workpiece material, please contact your WIDIA
™
distributor for available options.
** Grade WU25PD
™
was previously named K20FTiAlN.
TOP DRILL M1
™
with front clamping mechanism
TOP DRILL M1
inserts WU25PD** IT9–IT11 7,94–25,99 .3125–1.1023 —
chamfering
inserts
TopSTEP SH—
WP20PH —
12,50–36,01 .4921–1.4177 —
TopSTEP VG—
WP20PH —
TOP DRILL M1
bodies ——
7,94)Ø<9,50 .3125)Ø<.3740
9,50)Ø<11,00 .3740)Ø<.4331
11,00)Ø<12,50 .4331)Ø<.4921
12,50)Ø<14,00 .4921)Ø<.5512
14,00)Ø<15,50 .5512)Ø<.6102 max 3–8 x D
15,50)Ø<16,50 .6102)Ø<.6496
16,50)Ø<20,50 .6496)Ø<.8071
20,50)Ø<21,00 .8071)Ø<.8268
21,00)Ø<25,99 .8268)Ø<1.023
WID_Master16_Holemaking_ModularDrills_U002_U003_Metric_REBRAND.indd 2 11/12/15 12:04 PM
U3
LViWID M 16 H l ki M d l D ill U002 U003 M i REBRANDN b 1220159 53AM
widia.com
Modular Drills
Tool Selection Guide
TOP DRILL M1
™
with front clamping mechanism (continued)
7,94–27,99 .3125–1.1020 – U10–U15
12,50–36,01 .4921–1.4177
–
U16–U19
–
7,94≤Ø<9,50 .3125≤Ø<.3740 12 x D
U6–U8
9,50≤Ø<11,00 .3740≤Ø<.4331 13 x D
11,00≤Ø<12,50 .5424≤Ø<.4921 14 x D
12,50≤Ø<14,00 .4921≤Ø<.5512 15 x D
14,00≤Ø<15,00 .5512≤Ø<.6102 16 x D
15,50≤Ø<16,50 .6102≤Ø<.6496 17 x D
16,50≤Ø<20,50 .6496≤Ø<.8070 18 x D
20,50≤Ø<21,00 .8070≤Ø<.8267 20 x D
21,00≤Ø<27,99 .8267≤Ø<1.1010 500,0mm
Standard Product
Engineered Solutions
engineered solution range
coolant
drilling
inclined
exit
counter-
sinking
counter-
boring
2 ute,
2 margin
cooled
corner
chamfer
plain shank
)H6
SCF
Shanks
page(s)
diameter range
D1 mm
min–max
D1 inch
min–max
max
drilling
depth
WID_Master16_Holemaking_ModularDrills_U002_U003_Metric_REBRAND.indd 3 11/12/15 12:04 PM
U4
LViWID M 16 H l ki M d l D ill U004 U005 M i REBRANDN b 11 20158 20AM
widia.com
With its high level of performance, wide application range, and proven point
geometry, TDM1 combines all of the economic benefi ts of a modular drilling
system with the machining performance and hole quality to tackle even your
most challenging operations.
The TDM1 platform offers UP(M) drill-point design in WU25PD™ grade — a wide
application range geometry, specially developed for cost-effi cient drilling of steel,
cast iron, and stainless steel. It covers diameter ranges from 8–25,99mm within
the standard offering in L/D ratios of 3, 5, and 8 x D.
TOP DRILL M1
TOP DRILL M1™ Modular Drill System
With performance levels and metal removal rates comparable to that of solid
carbide drills, WIDIA™ TOP DRILL M1 offers all the quality and performance you
need in one versatile, economical package. The unique front clamping system
enables inserts to be changed quickly, even inside the machine tool, saving setup
time and manufacturing costs.
WID_Master16_Holemaking_ModularDrills_U004_U005_Metric_REBRAND.indd 4 11/11/15 8:56 AM
U5
LViWID M 16 H l ki M d l D ill U004 U005 M i REBRANDN b 1120158 20AM
widia.com
UP Point Design — Versatility and Productivity
• One insert style for all your work in steel, cast iron, and even
stainless steels.
• Low cutting forces and excellent centring capabilities.
• Universal point style for consistent performance and excellent
hole quality.
Easy Insert Change
• No screws or clamps required.
• Insert blades can be changed with a simple wrench that comes
with each holder.
Disposable
• No reconditioning costs.
• Consistent performance from tip to tip.
• Eliminates number of tools waiting for reconditioning,
thus avoiding hidden costs.
Customisation
• All intermediate diameters are quickly available as semi-standards.
• Multiple step drills available as customised solutions.
• New TopSTEP range of inserts offer extended chamfering and
counterboring to your one-shot drilling solution.
WID_Master16_Holemaking_ModularDrills_U004_U005_Metric_REBRAND.indd 5 11/11/15 8:56 AM
U6
LViWID M 16 H l ki M d l D ill U006 U007 M i REBRANDO b 15 20154 29PM
widia.com
Modular Drills
TOP DRILL M1™ Shanks
TOP DRILL M1 • 3 x D • Flanged • Metric
order number catalogue number D1 D1 max D L L1 L3 L4 max L5 LS
insert blade
seat size
3850904 TDM080R3SCF12M 7,94 8,49 12 86 41 35 26 1,5 45 W10
3850906 TDM085R3SCF12M 8,50 8,99 12 88 43 37 27 1,6 45 W11
3850908 TDM090R3SCF12M 9,00 9,49 12 90 45 39 29 1,7 45 W12
3850910 TDM095R3SCF12M 9,50 9,99 12 92 47 41 30 1,8 45 W13
3850912 TDM100R3SCF16M 10,00 10,49 16 97 49 43 32 1,9 48 W14
3850924 TDM105R3SCF16M 10,50 10,99 16 99 51 45 33 2,0 48 W15
3850926 TDM110R3SCF16M 11,00 11,49 16 101 53 47 35 2,1 48 W16
3850928 TDM115R3SCF16M 11,50 11,99 16 103 55 49 36 2,2 48 W17
3850930 TDM120R3SCF16M 12,00 12,49 16 106 58 52 38 2,3 48 W18
3850932 TDM125R3SCF16M 12,50 12,99 16 108 60 54 39 2,4 48 W19
3850934 TDM130R3SCF16M 13,00 13,49 16 110 62 56 41 2,5 48 W20
3850936 TDM135R3SCF16M 13,50 13,99 16 112 64 58 42 2,6 48 W21
3850938 TDM140R3SCF16M 14,00 14,49 16 114 66 60 44 2,7 48 W22
3850940 TDM145R3SCF16M 14,50 14,99 16 116 68 62 45 2,8 48 W23
3850942 TDM150R3SCF20M 15,00 15,99 20 122 72 66 48 2,8 50 W24
3850944 TDM160R3SCF20M 16,00 16,99 20 126 76 70 51 3,0 50 W25
3850946 TDM170R3SCF20M 17,00 17,99 20 131 81 75 54 3,2 50 W26
3850948 TDM180R3SCF25M 18,00 18,99 25 141 85 79 57 3,4 56 W27
3850950 TDM190R3SCF25M 19,00 19,99 25 144 89 83 60 3,6 56 W28
3850952 TDM200R3SCF25M 20,00 20,99 25 149 93 87 63 3,8 56 W29
3992070 TDM210R3SCF25M 21,00 21,99 25 153 97 91 66 3,7 56 W30
3992071 TDM220R3SCF25M 22,00 22,99 25 158 102 96 69 3,9 56 W31
3992072 TDM230R3SCF25M 23,00 23,99 25 162 106 100 72 4,1 56 W32
3992483 TDM240R3SCF25M 24,00 24,99 25 166 110 104 75 4,2 56 W33
3992484 TDM250R3SCF25M 25,00 25,99 25 170 114 108 78 4,4 56 W34
Modular Drills
• Tool body shipped with insert wrench.
WID_Master16_Holemaking_ModularDrills_U006_U007_Metric_REBRAND.indd 6 10/29/15 1:25 PM
U7
LViWID M 16 H l ki M d l D ill U006 U007 M i REBRANDO b 1520154 29PM
widia.com
Modular Drills
TOP DRILL M1™ Shanks
TOP DRILL M1 • 5 x D • Flanged • Metric
order number catalogue number D1 D1 max D L L1 L3 L4 max L5 LS
insert blade
seat size
3850905 TDM080R5SCF12M 7,94 8,49 12 104 59 53 43 1,5 45 W10
3850907 TDM085R5SCF12M 8,50 8,99 12 107 62 56 45 1,6 45 W11
3850909 TDM090R5SCF12M 9,00 9,49 12 110 65 59 48 1,7 45 W12
3850911 TDM095R5SCF12M 9,50 9,99 12 114 69 63 50 1,8 45 W13
3850923 TDM100R5SCF16M 10,00 10,49 16 120 72 66 53 1,9 48 W14
3850925 TDM105R5SCF16M 10,50 10,99 16 123 75 69 55 2,0 48 W15
3850927 TDM110R5SCF16M 11,00 11,49 16 126 78 72 58 2,1 48 W16
3850929 TDM115R5SCF16M 11,50 11,99 16 129 81 75 60 2,2 48 W17
3850931 TDM120R5SCF16M 12,00 12,49 16 132 84 78 63 2,3 48 W18
3850933 TDM125R5SCF16M 12,50 12,99 16 135 87 81 65 2,4 48 W19
3850935 TDM130R5SCF16M 13,00 13,49 16 138 90 84 68 2,5 48 W20
3850937 TDM135R5SCF16M 13,50 13,99 16 142 94 88 70 2,6 48 W21
3850939 TDM140R5SCF16M 14,00 14,49 16 145 97 91 73 2,7 48 W22
3850941 TDM145R5SCF16M 14,50 14,99 16 148 100 94 75 2,8 48 W23
3850943 TDM150R5SCF20M 15,00 15,99 20 156 106 100 80 2,8 50 W24
3850945 TDM160R5SCF20M 16,00 16,99 20 162 112 106 85 3,0 50 W25
3850947 TDM170R5SCF20M 17,00 17,99 20 169 119 113 90 3,2 50 W26
3850949 TDM180R5SCF25M 18,00 18,99 25 181 125 119 95 3,4 56 W27
3850951 TDM190R5SCF25M 19,00 19,99 25 187 131 125 100 3,6 56 W28
3850953 TDM200R5SCF25M 20,00 20,99 25 193 137 131 105 3,8 56 W29
3992485 TDM210R5SCF25M 21,00 21,99 25 200 144 138 110 3,7 56 W30
3992486 TDM220R5SCF25M 22,00 22,99 25 206 150 144 115 3,9 56 W31
3992487 TDM230R5SCF25M 23,00 23,99 25 212 156 150 120 4,1 56 W32
3992488 TDM240R5SCF25M 24,00 24,99 25 218 162 156 125 4,2 56 W33
3992489 TDM250R5SCF25M 25,00 25,99 25 225 169 163 130 4,4 56 W34
• Tool body shipped with insert wrench.
Modular Drills
WID_Master16_Holemaking_ModularDrills_U006_U007_Metric_REBRAND.indd 7 10/29/15 1:25 PM
U8
LViWID M 16 H l ki M d l D ill U008 U009 M i REBRANDN b 12 20159 57AM
widia.com
Modular Drills
TOP DRILL M1™ Shanks
TOP DRILL M1 • 8 x D • Flanged • Metric
order number catalogue number D1 D1 max D L L1 L3 L4 max L5 LS
insert blade
seat size
3992141 TDM080R8SCF12M 7,94 8,49 12 129 84 79 68 1,4 45 W10
3992142 TDM085R8SCF12M 8,50 8,99 12 134 89 83 72 1,5 45 W11
3992213 TDM090R8SCF12M 9,00 9,49 12 138 93 88 76 1,6 45 W12
3992214 TDM095R8SCF12M 9,50 9,99 12 144 99 93 80 1,7 45 W13
3992215 TDM100R8SCF16M 10,00 10,49 16 151 103 98 84 1,8 48 W14
3992216 TDM105R8SCF16M 10,50 10,99 16 156 108 102 88 1,9 48 W15
3992217 TDM110R8SCF16M 11,00 11,49 16 160 112 107 92 2,0 48 W16
3992218 TDM115R8SCF16M 11,50 11,99 16 165 117 111 96 2,1 48 W17
3992219 TDM120R8SCF16M 12,00 12,49 16 169 121 116 100 2,1 48 W18
3992220 TDM125R8SCF16M 12,50 12,99 16 174 126 120 104 2,2 48 W19
3992221 TDM130R8SCF16M 13,00 13,49 16 178 130 125 108 2,3 48 W20
3992222 TDM135R8SCF16M 13,50 13,99 16 184 136 130 112 2,4 48 W21
3992223 TDM140R8SCF16M 14,00 14,49 16 188 140 135 116 2,5 48 W22
3992224 TDM145R8SCF16M 14,50 14,99 16 193 145 139 120 2,6 48 W23
3992225 TDM150R8SCF20M 15,00 15,99 20 204 154 148 128 2,7 50 W24
3992226 TDM160R8SCF20M 16,00 16,99 20 213 163 157 136 2,8 50 W25
3992227 TDM170R8SCF20M 17,00 17,99 20 223 173 167 144 3,0 50 W26
3992228 TDM180R8SCF25M 18,00 18,99 25 238 182 176 152 3,2 56 W27
3992229 TDM190R8SCF25M 19,00 19,99 25 247 191 185 160 3,4 56 W28
3992230 TDM200R8SCF25M 20,00 20,99 25 256 200 194 168 3,6 56 W29
3992231 TDM210R8SCF25M 21,00 21,99 25 266 210 204 176 3,7 56 W30
3992232 TDM220R8SCF25M 22,00 22,99 25 275 219 213 184 3,9 56 W31
3992233 TDM230R8SCF25M 23,00 23,99 25 284 228 222 192 4,1 56 W32
3992234 TDM240R8SCF25M 24,00 24,99 25 293 237 231 200 4,2 56 W33
3992235 TDM250R8SCF25M 25,00 25,99 25 303 247 241 208 4,4 56 W34
Modular Drills
• Tool body shipped with insert wrench.
WID_Master16_Holemaking_ModularDrills_U008_U009_Metric_REBRAND.indd 8 11/12/15 12:00 PM
LViWID M 16 H l ki M d l D ill U008 U009 M i REBRANDN b 1220159 57AM
ToolBOSS vending solutions help to reduce costs and improve
effi ciencies to give you a competitive edge.
ToolBOSS Vending Solutions
For more information, please contact us at:
Tel: 888 281 8080
na-help.desk@toolboss.com
toolboss.com
Customer Offering
Shared Rewards
Free use of ToolBOSS vending machine combined with a
comprehensive maintenance and service package based
on agreed sales targets for specifi ed contract terms.
Direct Purchase of Equipment
ToolBOSS vending machines are available for purchase.
Maintenance and service packages available with
annual agreements.
ToolBOSS™
• Cut tooling inventory by 50% or more.
• Decrease spending on tooling by up to 30%.
• Reduce administrative costs by as much as 90%.
You can also use our NOVO app to guide you
to the correct choice!
For more information, please visit widia.com/novo.
NOVO: The Digital Source for Delivering
Smart Machining Solutions
For more information, contact your local WIDIA
Authorised Distributor or visit widia.com/services.
WID_Master16_Holemaking_ModularDrills_U008_U009_Metric_REBRAND.indd 9 11/12/15 12:00 PM
U10
LViWID M 16 H l ki M d l D ill U010 U011 M i REBRANDO b 15 20154 30PM
widia.com
Modular Drills
TOP DRILL M1™ Inserts
Modular Drills
(continued)
TOP DRILL M1 • UP(M)
K20FTiAlN
grade WU25PD
TiAlN
order # catalogue # D1 seat size/series
3850959 TDM0794UPM 7,94 W10
3848984 TDM0800UPM 8,00 W10
3848985 TDM0810UPM 8,10 W10
3850960 TDM0816UPM 8,16 W10
3850961 TDM0820UPM 8,20 W10
3848986 TDM0830UPM 8,30 W10
3850962 TDM0833UPM 8,33 W10
3848987 TDM0840UPM 8,40 W10
3850963 TDM0843UPM 8,43 W10
3848988 TDM0850UPM 8,50 W11
3848989 TDM0860UPM 8,60 W11
3850964 TDM0861UPM 8,61 W11
3848990 TDM0870UPM 8,70 W11
3850965 TDM0873UPM 8,73 W11
3848991 TDM0880UPM 8,80 W11
3850966 TDM0884UPM 8,84 W11
3848992 TDM0890UPM 8,90 W11
3849043 TDM0900UPM 9,00 W12
3850967 TDM0909UPM 9,09 W12
3849044 TDM0910UPM 9,10 W12
3850968 TDM0913UPM 9,13 W12
3849045 TDM0920UPM 9,20 W12
3849046 TDM0930UPM 9,30 W12
3850969 TDM0935UPM 9,35 W12
rst choice
alternate choice
WID_Master16_Holemaking_ModularDrills_U010_U011_Metric_REBRAND.indd 10 10/29/15 1:25 PM
U11
LViWID M 16 H l ki M d l D ill U010 U011 M i REBRANDO b 1520154 30PM
widia.com
Modular Drills
TOP DRILL M1™ Inserts
Modular Drills
(continued)
K20FTiAlN
grade WU25PD
TiAlN
order # catalogue # D1 seat size/series
3849047 TDM0940UPM 9,40 W12
3849048 TDM0950UPM 9,50 W13
3850970 TDM0953UPM 9,53 W13
3850971 TDM0956UPM 9,56 W13
3850972 TDM0958UPM 9,58 W13
3849049 TDM0960UPM 9,60 W13
3850973 TDM0970UPM 9,70 W13
3850974 TDM0980UPM 9,80 W13
3849050 TDM0990UPM 9,90 W13
3850975 TDM0992UPM 9,92 W13
3849051 TDM1000UPM 10,00 W14
3850976 TDM1002UPM 10,02 W14
3850977 TDM1008UPM 10,08 W14
3849052 TDM1010UPM 10,10 W14
3849053 TDM1020UPM 10,20 W14
3850978 TDM1026UPM 10,26 W14
3849054 TDM1030UPM 10,30 W14
3850979 TDM1032UPM 10,32 W14
3849055 TDM1040UPM 10,40 W14
3850980 TDM1049UPM 10,49 W14
3849056 TDM1050UPM 10,50 W15
3849057 TDM1060UPM 10,60 W15
3849058 TDM1070UPM 10,70 W15
3850981 TDM1072UPM 10,72 W15
3849059 TDM1080UPM 10,80 W15
3849060 TDM1090UPM 10,90 W15
3849061 TDM1100UPM 11,00 W16
3849062 TDM1110UPM 11,10 W16
3850982 TDM1111UPM 11,11 W16
3849063 TDM1120UPM 11,20 W16
3849064 TDM1130UPM 11,30 W16
3849065 TDM1140UPM 11,40 W16
3849066 TDM1150UPM 11,50 W17
3850983 TDM1151UPM 11,51 W17
3849067 TDM1160UPM 11,60 W17
3850984 TDM1161UPM 11,61 W17
3849068 TDM1170UPM 11,70 W17
3849069 TDM1180UPM 11,80 W17
3849070 TDM1190UPM 11,90 W17
3850985 TDM1191UPM 11,91 W17
(TOP DRILL M1 • UP(M) — continued)
rst choice
alternate choice
WID_Master16_Holemaking_ModularDrills_U010_U011_Metric_REBRAND.indd 11 10/29/15 1:25 PM
U12
LViWID M 16 H l ki M d l D ill U012 U013 M i REBRANDO b 15 20154 31PM
widia.com
Modular Drills
TOP DRILL M1™ Inserts
Modular Drills
(continued)
(TOP DRILL M1 • UP(M) — continued)
K20FTiAlN
grade WU25PD
TiAlN
order # catalogue # D1 seat size/series
3849071 TDM1200UPM 12,00 W18
3849072 TDM1210UPM 12,10 W18
3849073 TDM1220UPM 12,20 W18
3850986 TDM1230UPM 12,30 W18
3849074 TDM1240UPM 12,40 W18
3850987 TDM1247UPM 12,47 W18
3849075 TDM1250UPM 12,50 W19
3849076 TDM1260UPM 12,60 W19
3850988 TDM1270UPM 12,70 W19
3849077 TDM1280UPM 12,80 W19
3850989 TDM1290UPM 12,90 W19
3849078 TDM1300UPM 13,00 W20
3850990 TDM1310UPM 13,10 W20
3849079 TDM1320UPM 13,20 W20
3849080 TDM1330UPM 13,30 W20
3849081 TDM1340UPM 13,40 W20
3850991 TDM1349UPM 13,49 W20
3849082 TDM1350UPM 13,50 W21
3849083 TDM1360UPM 13,60 W21
3849084 TDM1370UPM 13,70 W21
3849085 TDM1380UPM 13,80 W21
3850992 TDM1389UPM 13,89 W21
3850993 TDM1390UPM 13,90 W21
3849086 TDM1400UPM 14,00 W22
3849087 TDM1410UPM 14,10 W22
3849088 TDM1420UPM 14,20 W22
3850994 TDM1429UPM 14,29 W22
3849089 TDM1430UPM 14,30 W22
3849090 TDM1440UPM 14,40 W22
3849091 TDM1450UPM 14,50 W23
3849092 TDM1460UPM 14,60 W23
3850995 TDM1467UPM 14,67 W23
3850996 TDM1468UPM 14,68 W23
3849093 TDM1470UPM 14,70 W23
3849094 TDM1480UPM 14,80 W23
3849095 TDM1490UPM 14,90 W23
3849096 TDM1500UPM 15,00 W24
3850997 TDM1508UPM 15,08 W24
3849097 TDM1510UPM 15,10 W24
3849098 TDM1520UPM 15,20 W24
rst choice
alternate choice
WID_Master16_Holemaking_ModularDrills_U012_U013_Metric_REBRAND.indd 12 10/29/15 1:25 PM
U13
LViWID M 16 H l ki M d l D ill U012 U013 M i REBRANDO b 1520154 31PM
widia.com
Modular Drills
TOP DRILL M1™ Inserts
Modular Drills
(continued)
K20FTiAlN
grade WU25PD
TiAlN
order # catalogue # D1 seat size/series
3849099 TDM1530UPM 15,30 W24
3849100 TDM1540UPM 15,40 W24
3850998 TDM1548UPM 15,48 W24
3849101 TDM1550UPM 15,50 W24
3849102 TDM1560UPM 15,60 W24
3849103 TDM1570UPM 15,70 W24
3849104 TDM1580UPM 15,80 W24
3850999 TDM1588UPM 15,88 W24
3849105 TDM1600UPM 16,00 W25
3851000 TDM1603UPM 16,03 W25
3851001 TDM1608UPM 16,08 W25
3849106 TDM1610UPM 16,10 W25
4010625 TDM1618UPM 16,18 W25
3849107 TDM1620UPM 16,20 W25
3851002 TDM1627UPM 16,27 W25
3849108 TDM1630UPM 16,30 W25
3849109 TDM1640UPM 16,40 W25
3849110 TDM1650UPM 16,50 W25
3849111 TDM1660UPM 16,60 W25
3851003 TDM1667UPM 16,67 W25
3849112 TDM1670UPM 16,70 W25
3849113 TDM1680UPM 16,80 W25
3851004 TDM1687UPM 16,87 W25
3849114 TDM1690UPM 16,90 W25
3849119 TDM1700UPM 17,00 W26
3851005 TDM1707UPM 17,07 W26
3849120 TDM1710UPM 17,10 W26
3849121 TDM1720UPM 17,20 W26
3849122 TDM1730UPM 17,30 W26
3849193 TDM1740UPM 17,40 W26
3851006 TDM1746UPM 17,46 W26
3849194 TDM1750UPM 17,50 W26
3849195 TDM1760UPM 17,60 W26
3849196 TDM1770UPM 17,70 W26
3849197 TDM1780UPM 17,80 W26
3851007 TDM1786UPM 17,86 W26
3849198 TDM1790UPM 17,90 W26
3849199 TDM1800UPM 18,00 W27
3849200 TDM1810UPM 18,10 W27
3849201 TDM1820UPM 18,20 W27
(TOP DRILL M1 • UP(M) — continued)
rst choice
alternate choice
WID_Master16_Holemaking_ModularDrills_U012_U013_Metric_REBRAND.indd 13 10/29/15 1:25 PM
U14
LViWID M 16 H l ki M d l D ill U014 U015 M i REBRANDO b 15 20154 32PM
widia.com
Modular Drills
TOP DRILL M1™ Inserts
Modular Drills
(continued)
K20FTiAlN
grade WU25PD
TiAlN
order # catalogue # D1 seat size/series
3851008 TDM1826UPM 18,26 W27
3849202 TDM1830UPM 18,30 W27
3849203 TDM1840UPM 18,40 W27
3849204 TDM1850UPM 18,50 W27
3849205 TDM1860UPM 18,60 W27
3851009 TDM1865UPM 18,65 W27
3849206 TDM1870UPM 18,70 W27
3849207 TDM1880UPM 18,80 W27
3849208 TDM1890UPM 18,90 W27
3849209 TDM1900UPM 19,00 W28
3851010 TDM1905UPM 19,05 W28
3849210 TDM1910UPM 19,10 W28
3849211 TDM1920UPM 19,20 W28
3851011 TDM1923UPM 19,23 W28
3851012 TDM1925UPM 19,25 W28
3851013 TDM1928UPM 19,28 W28
3849212 TDM1930UPM 19,30 W28
3851014 TDM1935UPM 19,35 W28
3849213 TDM1940UPM 19,40 W28
3851015 TDM1945UPM 19,45 W28
3849214 TDM1950UPM 19,50 W28
3849215 TDM1960UPM 19,60 W28
3849216 TDM1970UPM 19,70 W28
3849217 TDM1980UPM 19,80 W28
3851016 TDM1984UPM 19,84 W28
3849218 TDM1990UPM 19,90 W28
3849219 TDM2000UPM 20,00 W29
3849220 TDM2010UPM 20,10 W29
3849221 TDM2020UPM 20,20 W29
3851017 TDM2024UPM 20,24 W29
3849222 TDM2030UPM 20,30 W29
3849223 TDM2040UPM 20,40 W29
3849224 TDM2050UPM 20,50 W29
3849225 TDM2060UPM 20,60 W29
3851018 TDM2064UPM 20,64 W29
3849226 TDM2070UPM 20,70 W29
3849227 TDM2080UPM 20,80 W29
3849228 TDM2090UPM 20,90 W29
3849229 TDM2099UPM 20,99 W29
4003225 TDM2100UPM 21,00 W30
(TOP DRILL M1 • UP(M) — continued)
rst choice
alternate choice
WID_Master16_Holemaking_ModularDrills_U014_U015_Metric_REBRAND.indd 14 10/29/15 1:25 PM
U15
LViWID M 16 H l ki M d l D ill U014 U015 M i REBRANDO b 1520154 32PM
widia.com
Modular Drills
TOP DRILL M1™ Inserts
Modular Drills
K20FTiAlN
Metric
tolerance
D1 tolerance k8
8–10 0,000/+0,022
>10–17 0,000/+0,027
>17–18 0,000/+0,027
>18–21 0,000/+0,033
grade WU25PD
TiAlN
order # catalogue # D1 seat size/series
4003203 TDM2144UPM 21,44 W30
3969291 TDM2150UPM 21,50 W30
4003226 TDM2200UPM 22,00 W31
4003204 TDM2223UPM 22,23 W31
4003205 TDM2245UPM 22,45 W31
4003227 TDM2250UPM 22,50 W31
4003228 TDM2300UPM 23,00 W32
4003229 TDM2350UPM 23,50 W32
4003206 TDM2381UPM 23,81 W32
4003230 TDM2400UPM 24,00 W33
4003231 TDM2450UPM 24,50 W33
4003207 TDM2461UPM 24,61 W33
4003232 TDM2500UPM 25,00 W34
4003208 TDM2540UPM 25,40 W34
4002444 TDM2550UPM 25,50 W34
4003209 TDM2568UPM 25,68 W34
4003210 TDM2581UPM 25,81 W34
3992013 TDM2599UPM 25,99 W34
(TOP DRILL M1 • UP(M) — continued)
rst choice
alternate choice
WID_Master16_Holemaking_ModularDrills_U014_U015_Metric_REBRAND.indd 15 10/29/15 1:25 PM
U16
LViWID M 16 H l ki M d l D ill U016 U017 M i REBRANDN b 12 20159 58AM
widia.com
Provides high productivity through high-feed, one-shot operations,
and excellent tool life.
Modular TOP DRILL M1 Step Drill
• Use TopSTEP VG and SH chamfer and counterboring
inserts to create your speci c TDM1 modular step drill.
• Create complex holes with countersinks, chamfers,
or even both operations in one shot.
• Save time, achieve better cost, and run your
complex drilling process with higher stability.
Let your WIDIA
™
representative know about your specifi c needs. Use the Chamfer
and Counterboring Order Planning pages to create and send us your request —
available online as well.
Modular Drills
Modular Drills
TOP DRILL M1™ • TopSTEP Chamfer and Counterboring Inserts
Standard
TOP DRILL M1™ inserts.
Made-to-Order TDM1 Toolholder
• Available within 3–4 weeks.
• Made custom to your needs.
Standard
TopSTEP SH counterboring insert.
Standard
TopSTEP VG chamfering insert.
WID_Master16_Holemaking_ModularDrills_U016_U017_Metric_REBRAND.indd 16 11/12/15 12:00 PM
U17
LViWID M 16 H l ki M d l D ill U016 U017 M i REBRANDN b 1220159 58AM
widia.com
P
M
K
N
S
H
TopSTEP SH Counterboring Inserts
catalogue number D D1 S R¡ _N_N M
WP20PH
SXHX060204R20 6,35 2,85 2,38 0,40 11 7
5983390
SXHX070304R20 6,35 2,85 2,38 0,40 11 7
5983702
SXHX060208R20 6,35 2,85 2,38 0,80 11 7
5983701
SXHX070308R20 6,35 2,85 2,38 0,80 11 7
5983703
SXHX090304R20 9,52 3,50 3,18 0,40 11 7
5983704
SXHX090308R20 9,52 3,50 3,18 0,80 11 7
5983705
Modular Drills
TopSTEP SH Conterboring Inserts
• 90° insert can be positioned in alternative angles.
• Very good chip forming and surface quality.
• Two times indexable.
• Stocked standards in six insert sizes.
rst choice
alternate choice
Modular Drills
P
M
K
N
S
H
TOP DRILL M1™ • TopSTEP Chamfer and Counterboring Inserts
TopSTEP VG Chamfering Inserts
catalogue number W1 D1 S
WP20PH
VXGX10030234 6,35 2,85 3,48
5983706
TopSTEP VG Chamfering Inserts
• 45° chamfer angle with broad cutting edge.
• Hassle-free usage.
• Very stable and accurate positioning in pocket.
• Two times indexable.
• One universal insert size for a lot of applications.
rst choice
alternate choice
WID_Master16_Holemaking_ModularDrills_U016_U017_Metric_REBRAND.indd 17 11/12/15 12:00 PM
U18
LViWID M 16 H l ki M d l D ill U018 U019 M i REBRANDO b 15 20154 35PM
widia.com
Modular Drills
Chamfering and Countersinking Order Planning
Overall Length [L]
Drill Length [L1]
Shank Diameter [D]
Drill Diameter Min [D1]
Drilling Depth [DD]
Cutting Diameter 2 Angle m
Chamfering Depth [CD]
Option 1 TOP DRILL M1 Drilling and Chamfering
Option 2 TOP DRILL M1 Drilling and Countersinking
Overall Length [L]
Drill Length [L1]
Shank Diameter [D]
Drill Diameter Min [D1]
Drilling Depth [DD]
Cut Diameter 23 [D23]
Countersinking Depth [DD1]
Cutting Diameter 2 Angle m
Please utilise guide below to plan your TOP DRILL M1
™
modular step drill based
on your needs and requirements. Please contact your distributor for a quote.
WID_Master16_Holemaking_ModularDrills_U018_U019_Metric_REBRAND.indd 18 10/29/15 1:25 PM
U19
LViWID M 16 H l ki M d l D ill U018 U019 M i REBRANDO b 1520154 35PM
widia.com
Overall Length [L]
Drill Length [L1]
Shank Diameter [D]
Drill Diameter Min [D1]
Drilling Depth [DD]
Cut Diameter 23 [D23]
Countersinking Depth [DD1]
Cutting Diameter 2 Angle m1
Cutting Diameter 3 Angle m2
Chamfering depth [CD]
Option 3 TOP DRILL M1 Drilling and Countersinking and Chamfering
Modular Drills
Chamfering and Countersinking Order Planning
σ1
σ2
Please utilise guide below to plan your TOP DRILL M1
™
modular step drill based
on your needs and requirements. Please contact your distributor for a quote.
If a more complex tool is required, we need your individual information
to serve your speci c needs. Please contact your WIDIA
™
distributor
for further guidance.
WID_Master16_Holemaking_ModularDrills_U018_U019_Metric_REBRAND.indd 19 10/29/15 1:25 PM
U20
LViWID M 16 H l ki M d l D ill U020 U021 M i REBRANDO b 15 20154 36PM
widia.com
necessary coolant pressure (bar) (1 psi = .068948 bar)
hole diameter d1 [mm]
favourable values
coolant pressure too low
Modular Drills
Application Data • Victory™ TOP DRILL M1™ • UP(M) Geometry in WU25PD™
The diagram at left shows the coolant pressure as a function of the hole
diameter. The higher the coolant pressure, the better the drilling result.
Tool life and hole quality improve with increased coolant ow.
When drilling on inclined or curved surfaces, use a 50% lower feed than
the standard value. After the drill margins are fully engaged in the workpiece,
increase the feed to the standard value (100%). Premachining is required
on surfaces with inclination greater than 3°.
Coolant Pressure
Drilling on Inclined Surfaces
TOP DRILL M1 • UP(M) • WU25PD
™
• Speed and Feed Chart • Metric
Material
Group
Cutting Speed — vc Recommended Feed Rate
Range — m/min
min
Starting
Value max
Tool Diameter
(mm) 8,0 10,0 12,0 14,0 16,0 20,0 25,0
P
1
90
125
170 mm/r 0,11–0,20 0,13–0,25 0,14–0,31 0,17–0,39 0,19–0,45 0,25–0,48 0,30–0,52
2
105
140
180 mm/r 0,11–0,28 0,12–0,35 0,16–0,37 0,21–0,46 0,23–0,46 0,28–0,50 0,30–0,52
3
50
75
100 mm/r 0,11–0,28 0,12–0,35 0,16–0,37 0,21–0,46 0,23–0,46 0,28–0,50 0,30–0,52
4
50
75
100 mm/r 0,11–0,28 0,12–0,35 0,16–0,37 0,17–0,36 0,19–0,45 0,22–0,48 0,25–0,50
5
50
65
80 mm/r 0,10–0,20 0,10–0,23 0,10–0,25 0,14–0,29 0,16–0,32 0,18–0,36 0,22–0,42
6
50
65
80 mm/r 0,10–0,20 0,10–0,23 0,10–0,25 0,14–0,29 0,16–0,32 0,18–0,36 0,22–0,42
M
1
40
80
110 mm/r 0,06–0,22 0,08–0,23 0,09–0,24 0,10–0,25 0,11–0,26 0,13–0,28 0,13–0,32
2
35
55
75 mm/r 0,06–0,22 0,08–0,23 0,09–0,24 0,10–0,25 0,11–0,26 0,13–0,28 0,13–0,32
3
20
35
50 mm/r 0,06–0,22 0,08–0,23 0,09–0,24 0,10–0,25 0,11–0,26 0,13–0,28 0,13–0,32
K
1
60
95
170 mm/r 0,15–0,29 0,16–0,32 0,17–0,35 0,21–0,42 0,25–0,48 0,28–0,52 0,32–0,56
2
60
75
90 mm/r 0,15–0,29 0,16–0,30 0,17–0,33 0,21–0,41 0,25–0,48 0,28–0,52 0,32–0,56
3
40
65
90 mm/r 0,16–0,30 0,17–0,33 0,18–0,36 0,20–0,41 0,21–0,44 0,23–0,48 0,25–0,50
NOTE: Through coolant recommended for greater than 3 x D applications.
WID_Master16_Holemaking_ModularDrills_U020_U021_Metric_REBRAND.indd 20 10/29/15 1:25 PM
U21
LViWID M 16 H l ki M d l D ill U020 U021 M i REBRANDO b 1520154 36PM
widia.com
Modular Drills
Application Data • Victory™ TOP DRILL M1™
How to attach inserts How to detach inserts
1) Fix drill holder on arbour. For insert exchange,
x arbour on the machine or set on tool
presetter.
1) Remove dust from insert using air blast.
2) Remove dust using air blast. 2) Set the wrench properly.*
3) Put insert into drill holder. (Use gloves to
protect your hands.)
3) Fit the wrench to insert slot.
4) Turn lightly in a clockwise direction. (Use
gloves to protect your hands.)
4) Turn the wrench in an anti-clockwise direction.
5) Set the wrench properly.* 5) Once lock is released, insert can be turned with
ngers. (Use gloves to protect your hands.)
6) Make sure the wrench ts with the insert slot
for the wrench. (Is the wrench un xed from
the slot?)
6) Remove insert. (Use gloves to protect
your hands.)
Slot for wrench
7) Slowly turn the wrench in a clockwise
direction.
8) Complete.
*To order the TDM1 Wrench, please use order
number 3861623 and catalogue number 170.315.
WID_Master16_Holemaking_ModularDrills_U020_U021_Metric_REBRAND.indd 21 10/29/15 1:25 PM
U22
LViWID M 16 H l ki M d l D ill U022 U023 M i REBRANDO b 15 20154 37PM
widia.com
Modular Drills
Application Data • Victory™ TOP DRILL M1™
Application
Recommendation
Workpiece
Shape
Flat Face
Recommended
Stacked Plates
Recommended
Inclined Surface >3°
Not Recommended
Half Cylindrical
Not Recommended
Hole Expansion
Not Recommended
Concave Surface
Not Recommended
Pipe Material
Not Recommended
Cored Hole
Not Recommended
Coolant
1) Internal coolant is recommended.
2) In case of external coolant, cutting depth
must be 3 x D or less.
3) Dry cutting is not recommended.
Limited applicability in cast iron materials,
MQL strongly recommended.
Cautions
Usage Precautions
Core deviation
1) For Turning Machines
Set deviation amount under 0,02mm
between workpiece and drill.
2) For Machining Centres
Do not use any arbour with a damaged attachment surface.
Centre of arbour deviation must be within 0,02mm.
Max.
0,02mm
Max.
0,02mm
WID_Master16_Holemaking_ModularDrills_U022_U023_Metric_REBRAND.indd 22 10/29/15 1:25 PM
U23
LViWID M 16 H l ki M d l D ill U022 U023 M i REBRANDO b 1520154 37PM
widia.com
Modular Drills
Application Data • Victory™ TOP DRILL M1™ • Steel
Feed Force
Power
Torque
0.0
2.0
4.0
6.0
8.0
10.0
12.0
8 101214161820222426
fz = 0,45
fz = 0,35
fz = 0,25
fz = 0,15
Ff [kN] Feed Force
Drill Diameter D1 [mm]
0.0
2.0
4.0
6.0
8.0
10.0
12.0
8 101214161820222426
fz = 0,45
fz = 0,35
fz = 0,25
fz = 0,15
Ps [kW] Drive Power
Drill Diameter D1 [mm]
0
10
20
30
40
50
60
70
80
90
100
8 101214161820222426
fz = 0,45
fz = 0,35
fz = 0,25
fz = 0,15
Md [Nm] Torque
Drill Diameter D1 [mm]
Metric
Metric
Metric
WID_Master16_Holemaking_ModularDrills_U022_U023_Metric_REBRAND.indd 23 10/29/15 1:25 PM
U24
LViWID M 16 H l ki M d l D ill U024 U025 M i REBRANDN b 12 201510 01AM
widia.com
Modular Drills
Application Data • Victory™ TOP DRILL M1™ • Cast Iron
Torque
Feed Force
Power
0.0
1.0
2.0
3.0
4.0
5.0
7.0
6.0
8 101214161820222426
fz = 0,45
fz = 0,35
fz = 0,25
fz = 0,15
0.0
2.0
4.0
6.0
8.0
10.0
16.0
14.0
12.0
8 101214161820222426
fz = 0,45
fz = 0,35
fz = 0,25
fz = 0,15
0
10
20
30
40
50
70
60
8 101214161820222426
fz = 0,50
fz = 0,40
fz = 0,30
fz = 0,20
Ff [kN] Feed Force
Drill Diameter D1 [mm]
Ps [kW] Drive Power
Drill Diameter D1 [mm]
Md [Nm] Torque
Drill Diameter D1 [mm]
Metric
Metric
Metric
WID_Master16_Holemaking_ModularDrills_U024_U025_Metric_REBRAND.indd 24 11/12/15 12:00 PM
LViWID M 16 H l ki M d l D ill U024 U025 M i REBRANDN b 12201510 01AM
The TDM1 modular drill system offers performance levels and Metal Removal Rates (MRR) comparable
to that of solid carbide drills. The unique front clamping system enables inserts to be changed quickly,
even inside the machine tool, saving setup time and manufacturing costs.
• UP(M) drill point design in WU25PD™.
• Diameter ranges from 8-25,99mm in L/D ratios of 3, 5, and 8 x D.
• Disposable — eliminates number of tools waiting for reconditioning, avoiding hidden costs.
• All intermediate diameters available as semi-standards. Multiple step drills available as customised
solutions. New TopSTEP range of inserts offer extended chamfering and counterboring.
To learn more about the benefi ts of WIDIA™ Top Drill M1, contact your local distributor.
Top Drill M1™
Cut Time
and Costs,
Not Quality and
Performance
WID_Master16_Holemaking_ModularDrills_U024_U025_Metric_REBRAND.indd 25 11/12/15 12:00 PM
U26
LViWID M 16 H l ki M d l D ill U026 U027 M i REBRANDO b 19 20156 51AM
widia.com
WIDIA™ provides a comprehensive line of spade blades from 8–114mm (.315–4.5")
to cover a wide range of machining environments and materials.
• Fast penetration rates, less downtime, and lower variability.
• Interchangeable with other conventional spade blade holders.
• Improved surface fi nish — eliminates subsequent hole fi nishing operations.
• Standard and special drill body/holder offering, including step drill and porting
tool confi gurations.
• Intermediate diameters and specifi c toolholder length quickly available
upon request.
WIDIA-Metcut spade blades are great choices for:
• Universal application for most plain and alloyed steel applications as well as
for cast iron and stainless steels.
• Machining environments where rigidity, coolant supply, or speed and feed rates
are limiting factors.
• Short run manufacturing and prototyping environments.
•Especially when dealing with larger diameters and deeper holes.
Spade Blades
WIDIA-Metcut™ Spade Blades •
A complement to TOP DRILL M1™
WID_Master16_Holemaking_ModularDrills_U026_U027_Metric_REBRAND.indd 26 10/29/15 1:25 PM
U27
LViWID M 16 H l ki M d l D ill U026 U027 M i REBRANDO b 1920156 51AM
widia.com
Application Information
T-15 HSS spade blades are recommended:
• For providing straighter and more consistent holes with superior surface finishes
than can be produced using either HSS twist drills or carbide indexable drills.
• When rigidity of the machine or the fixture requires a more forgiving, durable,
and tougher tool; T-15 steel possesses a higher transverse rupture strength and
is more impact-resistant than comparable carbide spade blades and/or carbide
indexable drills.
• In applications requiring hole depths up through 15x to 20x diameter; pecking
may be required for depths above 7x diameter for some materials.
• As a cost-effective alternative to carbide indexable drills since T-15 steel spade
blades operate at comparable penetration rates to single-effective indexable
drills in materials <35 Rc, and one spade blade holder accommodates multiple
diameter blades.
Spade Blade Holders
Generally can accommodate a range of blade sizes up to 1.30–1.35 times the
smallest blade size. It is therefore possible to cover the entire range of hole sizes with
just a few spade drill holders. Contrast this with the inventories required for indexable
drills and steel taper shank drills.
WID_Master16_Holemaking_ModularDrills_U026_U027_Metric_REBRAND.indd 27 10/29/15 1:25 PM
U28
LViWID M 16 H l ki M d l D ill U028 U029 M i REBRANDO b 15 20154 38PM
widia.com
TiAlN TiN
Spade Blades
T-15 HSS
Seat Size Z
D1 L S
TiAlN
order # catalogue #
TiN
order # catalogue # mm mm mm m
2759621 7FZ-0438A — 11,11 9,19 2,39 132°
2759599 7FZ-0472A — 12,00 9,19 2,39 132°
2759592 7FZ-0484A — 12,30 9,19 2,39 132°
2759588 7FZ-0492A — 12,50 9,19 2,39 132°
2891175 7FZ-0500A 2759581 7FZ-0500T 12,70 9,19 2,39 132°
NOTE: Toolholders available upon request as an Engineered Solution.
Modular Drills
rst choice
alternate choice
D1 L S
TiAlN TiN
WID_Master16_Holemaking_ModularDrills_U028_U029_Metric_REBRAND.indd 28 10/29/15 1:25 PM
U29
LViWID M 16 H l ki M d l D ill U028 U029 M i REBRANDO b 1520154 38PM
widia.com
TiAlN TiN
Spade Blades
T-15 HSS
Seat Size 0
D1 L S
TiAlN
order # catalogue #
TiN
order # catalogue # mm mm mm m
2907270 7F0-0509A — 12,93 10,80 3,18 132°
— 2760494 7F0-0512T 13,00 10,80 3,18 132°
2760492 7F0-0516A — 13,10 10,80 3,18 132°
2760489 7F0-0531A 2760485 7F0-0531T 13,50 10,80 3,18 132°
2760481 7F0-0547A 2760478 7F0-0547T 13,89 10,80 3,18 132°
2760477 7F0-0551A 2760473 7F0-0551T 14,00 10,80 3,18 132°
2760472 7F0-0563A 2760466 7F0-0563T 14,29 10,80 3,18 132°
2760463 7F0-0571A — 14,50 10,80 3,18 132°
2760460 7F0-0578A 2760458 7F0-0578T 14,68 10,80 3,18 132°
2760454 7F0-0591A 2760453 7F0-0591T 15,00 10,80 3,18 132°
2760452 7F0-0594A 2760449 7F0-0594T 15,08 10,80 3,18 132°
2760444 7F0-0609A 2760441 7F0-0609T 15,48 10,80 3,18 132°
2760440 7F0-0610A — 15,50 10,80 3,18 132°
3053979 7F0-0625A 2760430 7F0-0625T 15,88 10,80 3,18 132°
2891178 7F0-0630A 2760424 7F0-0630T 16,00 10,80 3,18 132°
2760420 7F0-0641A 2760418 7F0-0641T 16,27 10,80 3,18 132°
— 2760415 7F0-0650T 16,50 10,80 3,18 132°
2760413 7F0-0656A 1988432 7F0-0656T 16,67 10,80 3,18 132°
2760404 7F0-0669A — 17,00 10,80 3,18 132°
2760399 7F0-0672A 2760397 7F0-0672T 17,07 10,80 3,18 132°
2760393 7F0-0688A 2760390 7F0-0688T 17,46 10,80 3,18 132°
3083635 7F0-0689A 2760386 7F0-0689T 17,50 10,80 3,18 132°
NOTE: Toolholders available upon request as an Engineered Solution.
rst choice
alternate choice
Modular Drills
D1 L S
TiAlN TiN
WID_Master16_Holemaking_ModularDrills_U028_U029_Metric_REBRAND.indd 29 10/29/15 1:25 PM
U30
LViWID M 16 H l ki M d l D ill U030 U031 M i REBRANDO b 15 20154 39PM
widia.com
TiAlN TiN
Spade Blades
T-15 HSS
Seat Size 1
D1 L S
TiAlN
order # catalogue #
TiN
order # catalogue # mm mm mm m
2760383 7F1-0703A 2760381 7F1-0703T 17,86 13,84 3,96 132°
2760380 7F1-0709A 2760377 7F1-0709T 18,00 13,84 3,96 132°
— 2760371 7F1-0719T 18,26 13,84 3,96 132°
2760365 7F1-0734A 2760362 7F1-0734T 18,65 13,84 3,96 132°
2760361 7F1-0748A 2760359 7F1-0748T 19,00 13,84 3,96 132°
3114699 7F1-0750A 2387228 7F1-0750T 19,05 13,84 3,96 132°
— 2604191 7F1-0756T 19,20 13,84 3,96 132°
2760344 7F1-0766A 2760341 7F1-0766T 19,45 13,84 3,96 132°
— 2760338 7F1-0768T 19,50 13,84 3,96 132°
2760335 7F1-0781A 2760331 7F1-0781T 19,85 13,84 3,96 132°
2760330 7F1-0787A 2760328 7F1-0787T 20,00 13,84 3,96 132°
— 2760323 7F1-0797T 20,24 13,84 3,96 132°
2255810 7F1-0806A — 20,47 13,84 3,96 132°
2760319 7F1-0807A 2760316 7F1-0807T 20,50 13,84 3,96 132°
2760315 7F1-0813A 2760310 7F1-0813T 20,64 13,84 3,96 132°
2760305 7F1-0827A 2760303 7F1-0827T 21,00 13,84 3,96 132°
2760302 7F1-0828A 2760300 7F1-0828T 21,03 13,84 3,96 132°
— 2760296 7F1-0844T 21,43 13,84 3,96 132°
2760292 7F1-0859A 2760290 7F1-0859T 21,83 13,84 3,96 132°
2940716 7F1-0866A 2760287 7F1-0866T 22,00 13,84 3,96 132°
1926120 7F1-0875A 2760282 7F1-0875T 22,23 13,84 3,96 132°
2760280 7F1-0891A 2760278 7F1-0891T 22,62 13,84 3,96 132°
2760276 7F1-0906A 2760273 7F1-0906T 23,02 13,84 3,96 132°
3099442 7F1-0922A 2760268 7F1-0922T 23,42 13,84 3,96 132°
2760265 7F1-0938A 2760262 7F1-0938T 23,81 13,84 3,96 132°
2891181 7F1-0945A 2760257 7F1-0945T 24,00 13,84 3,96 132°
2760256 7F1-0953A 2760253 7F1-0953T 24,21 13,84 3,96 132°
— 3339713 7F1-0960T 24,38 13,84 3,96 132°
NOTE: Toolholders available upon request as an Engineered Solution.
Modular Drills
rst choice
alternate choice
D1 L S
TiAlN TiN
WID_Master16_Holemaking_ModularDrills_U030_U031_Metric_REBRAND.indd 30 10/29/15 1:25 PM
U31
LViWID M 16 H l ki M d l D ill U030 U031 M i REBRANDO b 1520154 39PM
widia.com
TiAlN TiN
Spade Blades
T-15 HSS
Seat Size 2
D1 L S
TiAlN
order # catalogue #
TiN
order # catalogue # mm mm mm m
— 2760247 7F2-0969T 24,61 16,13 4,76 132°
2760243 7F2-0984A 2760240 7F2-0984T 25,00 16,13 4,76 132°
2760239 7F2-1000A 2760235 7F2-1000T 25,40 16,13 4,76 132°
2760234 7F2-1003A — 25,48 16,13 4,76 132°
3088200 7F2-1016A 2760226 7F2-1016T 25,80 16,13 4,76 132°
3096208 7F2-1024A 2760223 7F2-1024T 26,00 16,13 4,76 132°
2760222 7F2-1031A 2760219 7F2-1031T 26,20 16,13 4,76 132°
2760216 7F2-1047A 2760214 7F2-1047T 26,59 16,13 4,76 132°
3096207 7F2-1063A 2760207 7F2-1063T 26,99 16,13 4,76 132°
2261849 7F2-1078A 2760203 7F2-1078T 27,61 16,13 4,76 132°
2760199 7F2-1094A 2760196 7F2-1094T 27,78 16,13 4,76 132°
2760195 7F2-1102A 2760194 7F2-1102T 28,00 16,13 4,76 132°
— 2760189 7F2-1109T 28,17 16,13 4,76 132°
2760188 7F2-1125A 2760184 7F2-1125T 28,58 16,13 4,76 132°
3024915 7F2-1141A — 28,97 16,13 4,76 132°
2760181 7F2-1142A — 29,00 16,13 4,76 132°
3088746 7F2-1156A 2760174 7F2-1156T 29,37 16,13 4,76 132°
— 2760169 7F2-1172T 29,77 16,13 4,76 132°
2760167 7F2-1181A 2760164 7F2-1181T 30,00 16,13 4,76 132°
2760162 7F2-1188A 2760159 7F2-1188T 30,16 16,13 4,76 132°
— 2760152 7F2-1203T 30,56 16,13 4,76 132°
2760150 7F2-1219A 2760148 7F2-1219T 30,96 16,13 4,76 132°
2760147 7F2-1221A — 31,00 16,13 4,76 132°
2907272 7F2-1231A — 31,27 16,13 4,76 132°
— 2760141 7F2-1234T 31,35 16,13 4,76 132°
2760137 7F2-1250A 2760134 7F2-1250T 31,75 16,13 4,76 132°
— 2895976 7F2-1254T 31,85 16,13 4,76 132°
2760131 7F2-1260A 2760128 7F2-1260T 32,00 16,13 4,76 132°
3032539 7F2-1266A 2967699 7F2-1266T 32,15 16,13 4,76 132°
— 2760121 7F2-1281T 32,55 16,13 4,76 132°
2760118 7F2-1299A — 33,00 16,13 4,76 132°
2760112 7F2-1313A 2760109 7F2-1313T 33,34 16,13 4,76 132°
rst choice
alternate choice
(continued)
NOTE: Toolholders available upon request as an Engineered Solution.
Modular Drills
D1 L S
TiAlN TiN
WID_Master16_Holemaking_ModularDrills_U030_U031_Metric_REBRAND.indd 31 10/29/15 1:25 PM
U32
LViWID M 16 H l ki M d l D ill U032 U033 M i REBRANDO b 15 20154 41PM
widia.com
TiAlN TiN
rst choice
alternate choice
NOTE: Toolholders available upon request as an Engineered Solution.
Modular Drills
(Seat Size 2 — continued)
Spade Blades
T-15 HSS
D1 L S
TiAlN
order # catalogue #
TiN
order # catalogue # mm mm mm m
— 2760106 7F2-1328T 33,73 16,13 4,76 132°
2760105 7F2-1339A — 34,00 16,13 4,76 132°
2760101 7F2-1344A 2760098 7F2-1344T 34,13 16,13 4,76 132°
— 2760094 7F2-1359T 34,53 16,13 4,76 132°
1926121 7F2-1375A 2760090 7F2-1375T 34,93 16,13 4,76 132°
2760089 7F2-1378A — 35,00 16,13 4,76 132°
2759880 7F4-2166A — 55,02 23,62 7,94 132°
D1 L S
WID_Master16_Holemaking_ModularDrills_U032_U033_Metric_REBRAND.indd 32 10/29/15 1:25 PM
U33
LViWID M 16 H l ki M d l D ill U032 U033 M i REBRANDO b 1520154 41PM
widia.com
TiAlN TiN
Spade Blades
T-15 HSS
Seat Size 3
D1 L S
TiAlN
order # catalogue #
TiN
order # catalogue # mm mm mm m
— 2760079 7F3-1391T 35,32 20,45 6,35 132°
2760078 7F3-1406A 2760076 7F3-1406T 35,72 20,45 6,35 132°
2760072 7F3-1417A 2760069 7F3-1417T 36,00 20,45 6,35 132°
2760066 7F3-1438A 2760063 7F3-1438T 36,51 20,45 6,35 132°
2760060 7F3-1457A 2760059 7F3-1457T 37,00 20,45 6,35 132°
2760058 7F3-1469A 2760056 7F3-1469T 37,31 20,45 6,35 132°
— 2760053 7F3-1484T 37,70 20,45 6,35 132°
2760051 7F3-1496A — 38,00 20,45 6,35 132°
2760048 7F3-1500A 2760045 7F3-1500T 38,10 20,45 6,35 132°
— 2760038 7F3-1516T 38,50 20,45 6,35 132°
— 2760035 7F3-1531T 38,90 20,45 6,35 132°
2760034 7F3-1535A — 39,00 20,45 6,35 132°
2760027 7F3-1563A 2760024 7F3-1563T 39,69 20,45 6,35 132°
2760023 7F3-1575A 2760021 7F3-1575T 40,00 20,45 6,35 132°
— 2760015 7F3-1594T 40,48 20,45 6,35 132°
2760011 7F3-1614A — 41,00 20,45 6,35 132°
2760008 7F3-1625A 2760004 7F3-1625T 41,28 20,45 6,35 132°
2760001 7F3-1654A — 42,00 20,45 6,35 132°
— 2759996 7F3-1656T 42,07 20,45 6,35 132°
2759993 7F3-1688A 2759991 7F3-1688T 42,86 20,45 6,35 132°
— 2759989 7F3-1693T 43,00 20,45 6,35 132°
2759987 7F3-1719A 2759985 7F3-1719T 43,66 20,45 6,35 132°
2759984 7F3-1732A — 44,00 20,45 6,35 132°
2759977 7F3-1750A 2759974 7F3-1750T 44,45 20,45 6,35 132°
— 2759970 7F3-1766T 44,85 20,45 6,35 132°
2759969 7F3-1772A 2759967 7F3-1772T 45,00 20,45 6,35 132°
— 2759963 7F3-1781T 45,25 20,45 6,35 132°
2759960 7F3-1811A — 46,00 20,45 6,35 132°
2759958 7F3-1813A 2759956 7F3-1813T 46,04 20,45 6,35 132°
— 2759951 7F3-1844T 46,83 20,45 6,35 132°
— 2759949 7F3-1850T 47,00 20,45 6,35 132°
2759945 7F3-1875A 2759942 7F3-1875T 47,63 20,45 6,35 132°
rst choice
alternate choice
NOTE: Toolholders available upon request as an Engineered Solution.
Modular Drills
D1 L S
TiAlN TiN
WID_Master16_Holemaking_ModularDrills_U032_U033_Metric_REBRAND.indd 33 10/29/15 1:25 PM
U34
LViWID M 16 H l ki M d l D ill U034 U035 M i REBRANDN b 3 20157 14AM
widia.com
TiAlN TiN
Spade Blades
T-15 HSS
Seat Size 4
D1 L S
TiAlN
order # catalogue #
TiN
order # catalogue # mm mm mm m
— 2759937 7F4-1880T 47,75 23,62 7,95 132°
2759936 7F4-1890A 2759935 7F4-1890T 48,00 23,62 7,95 132°
2759934 7F4-1906A 2759932 7F4-1906T 48,42 23,62 7,95 132°
2759930 7F4-1929A — 49,00 23,62 7,95 132°
2759927 7F4-1938A 2759925 7F4-1938T 49,21 23,62 7,95 132°
2759921 7F4-1969A 2759919 7F4-1969T 50,00 23,62 7,95 132°
2759916 7F4-2000A 2759913 7F4-2000T 50,80 23,62 7,95 132°
— 2759911 7F4-2008T 51,00 23,62 7,95 132°
— 2952747 7F4-2016T 51,20 23,62 7,95 132°
2759904 7F4-2031A 2759902 7F4-2031T 51,60 23,62 7,95 132°
2759901 7F4-2047A 2759900 7F4-2047T 52,00 23,62 7,95 132°
2759899 7F4-2063A 2759896 7F4-2063T 52,39 23,62 7,95 132°
2895971 7F4-2087A — 53,00 23,62 7,95 132°
— 2759892 7F4-2094T 53,18 23,62 7,95 132°
2759891 7F4-2125A 2759888 7F4-2125T 53,98 23,62 7,95 132°
2759887 7F4-2126A — 54,00 23,62 7,95 132°
— 2759882 7F4-2156T 54,77 23,62 7,95 132°
2759880 7F4-2166A — 55,02 23,62 7,94 132°
— 2759876 7F4-2188T 55,56 23,62 7,95 132°
2759874 7F4-2205A — 56,00 23,62 7,95 132°
2759872 7F4-2219A 2759870 7F4-2219T 56,36 23,62 7,95 132°
2759868 7F4-2244A — 57,00 23,62 7,95 132°
2759865 7F4-2250A 2759862 7F4-2250T 57,15 23,62 7,95 132°
— 2759858 7F4-2281T 57,95 23,62 7,95 132°
2759857 7F4-2284A — 58,00 23,62 7,95 132°
2759854 7F4-2313A 2759852 7F4-2313T 58,74 23,62 7,95 132°
2759851 7F4-2323A — 59,00 23,62 7,95 132°
— 2759848 7F4-2344T 59,53 23,62 7,95 132°
NOTE: Toolholders available upon request as an Engineered Solution.
Modular Drills
rst choice
alternate choice
(continued)
D1 L S
TiAlN TiN
WID_Master16_Holemaking_ModularDrills_U034_U035_Metric_REBRAND.indd 34 11/3/15 9:53 AM
U35
LViWID M 16 H l ki M d l D ill U034 U035 M i REBRANDN b 320157 14AM
widia.com
TiAlN TiN
Spade Blades
T-15 HSS
D1 L S
TiAlN
order # catalogue #
TiN
order # catalogue # mm mm mm m
— 2759845 7F4-2362T 60,00 23,62 7,95 132°
2759843 7F4-2375A 2759840 7F4-2375T 60,33 23,62 7,95 132°
2759833 7F4-2438A 2759831 7F4-2438T 61,91 23,62 7,95 132°
2759830 7F4-2441A — 62,00 23,62 7,95 132°
2759828 7F4-2469A — 62,71 23,62 7,95 132°
— 2759823 7F4-2480T 63,00 23,62 7,95 132°
2759822 7F4-2500A 2759820 7F4-2500T 63,50 23,62 7,95 132°
— 2759816 7F4-2531T 64,30 23,62 7,95 132°
3027222 7F4-2559A — 65,00 23,62 7,95 132°
2759813 7F4-2563A 2759811 7F4-2563T 65,09 23,62 7,95 132°
NOTE: Toolholders available upon request as an Engineered Solution.
Modular Drills
rst choice
alternate choice
(Seat Size 4 — continued)
D1 L S
WID_Master16_Holemaking_ModularDrills_U034_U035_Metric_REBRAND.indd 35 11/3/15 9:53 AM
U36
LViWID M 16 H l ki M d l D ill U036 U037 M i REBRANDO b 15 20154 43PM
widia.com
TiAlN TiN
Spade Blades
T-15 HSS
Seat Size 5
D1 L S
TiAlN
order # catalogue #
TiN
order # catalogue # mm mm mm m
— 2759808 7F5-2500T 63,50 31,50 11,11 144°
2759802 7F5-2563A 2759801 7F5-2563T 65,09 31,50 11,11 144°
— 2759791 7F5-2625T 66,68 31,50 11,11 144°
— 2759789 7F5-2656T 67,47 31,50 11,11 144°
2759788 7F5-2677A — 68,00 31,50 11,11 144°
— 2759781 7F5-2719T 69,06 31,50 11,11 144°
2759780 7F5-2750A 2759778 7F5-2750T 69,85 31,50 11,11 144°
2961641 7F5-2756A — 70,00 31,50 11,11 144°
2759773 7F5-2813A — 71,44 31,50 11,11 144°
2759766 7F5-2875A 2759764 7F5-2875T 73,03 31,50 11,11 144°
— 2759756 7F5-2938T 74,61 31,50 11,11 144°
2759755 7F5-2969A 2759753 7F5-2969T 75,41 31,50 11,11 144°
2759751 7F5-3000A 2759748 7F5-3000T 76,20 31,50 11,11 144°
NOTE: Toolholders available upon request as an Engineered Solution.
Modular Drills
rst choice
alternate choice
D1 L S
TiAlN TiN
WID_Master16_Holemaking_ModularDrills_U036_U037_Metric_REBRAND.indd 36 10/29/15 1:25 PM
U37
LViWID M 16 H l ki M d l D ill U036 U037 M i REBRANDO b 1520154 43PM
widia.com
TiAlN TiN
TiAlN TiN
Spade Blades
T-15 HSS
Seat Size 6
D1 L S
TiAlN
order # catalogue #
TiN
order # catalogue # mm mm mm m
2759745 7F6-3063A 2759743 7F6-3063T 77,79 31,50 11,11 144°
2759742 7F6-3071A — 78,00 31,50 11,11 144°
2759739 7F6-3125A — 79,38 31,50 11,11 144°
2759736 7F6-3150A — 80,00 31,50 11,11 144°
— 2759731 7F6-3188T 80,96 31,50 11,11 144°
— 2759726 7F6-3250T 82,55 31,50 11,11 144°
— 2759718 7F6-3375T 85,73 31,50 11,13 144°
— 2759715 7F6-3438T 87,31 31,50 11,13 144°
— 2759709 7F6-3500T 88,90 31,50 11,13 144°
NOTE: Toolholders available upon request as an Engineered Solution.
Modular Drills
rst choice
alternate choice
Seat Size 7
D1 L S
TiAlN
order # catalogue #
TiN
order # catalogue # mm mm mm m
— 3279755 7F7-3543T 90,00 31,50 11,13 144°
— 2759703 7F7-3563T 90,49 31,50 11,13 144°
— 2759698 7F7-3688T 93,66 31,50 11,13 144°
— 2759688 7F7-3938T 96,00 31,50 11,13 144°
2972689 7F7-3813A — 96,84 31,50 11,13 144°
2759684 7F7-4000A — 101,60 31,50 11,13 144°
NOTE: Toolholders available upon request as an Engineered Solution.
rst choice
alternate choice
D1 L S
D1 L S
TiAlN TiN
WID_Master16_Holemaking_ModularDrills_U036_U037_Metric_REBRAND.indd 37 10/29/15 1:25 PM
U38
LViWID M 16 H l ki M d l D ill U038 U039 M i REBRANDN b 2 20153 40PM
widia.com
Spade Blades
Application Data • HSS Spade Blades
Modular Drills
HSS Spade Blades • Speed and Feed Chart • Metric
Grade Feed (mm/rev)
Material
Group
Hardness
BHN TiN TiAlN
Y & Z
(9.5–12.7)
0
(13–17.5)
1
(17.86–24)
2
(24.61–35)
3
(35.72–47.63)
4
(48–65.09)
5
(63.5–76.2)
6–7–8
(76.99–114.3)
P
0
85–125
55 –
0,18 0,23 0,30 0,38 0,48 0,58 0,64 0,69
125–175
50 –
0,15 0,23 0,30 0,38 0,48 0,58 0,61 0,66
175–225
45 –
0,13 0,20 0,25 0,36 0,46 0,53 0,58 0,64
225–275
45 –
0,13 0,20 0,25 0,36 0,46 0,53 0,58 0,64
1
100–150
60 –
0,20 0,28 0,36 0,43 0,53 0,64 0,66 0,71
150–200
55 –
0,18 0,25 0,33 0,41 0,51 0,58 0,61 0,66
200–250
50 –
0,15 0,25 0,33 0,41 0,51 0,58 0,61 0,66
2
125–175
50 –
0,15 0,23 0,30 0,38 0,48 0,58 0,64 0,69
175–225
45 –
0,13 0,20 0,25 0,36 0,46 0,53 0,58 0,64
225–275
45 65
0,13 0,20 0,25 0,36 0,46 0,53 0,56 0,61
275–325
40 60
0,10 0,18 0,23 0,30 0,41 0,48 0,53 0,58
3
125–175
45 –
0,18 0,23 0,28 0,36 0,46 0,53 0,58 0,64
175–225
45 –
0,15 0,20 0,25 0,36 0,43 0,48 0,53 0,58
225–275
40 55
0,13 0,18 0,25 0,33 0,43 0,48 0,51 0,53
275–325
35 50
0,10 0,15 0,23 0,30 0,38 0,43 0,46 0,48
325–375
35 50
0,08 0,15 0,23 0,30 0,38 0,43 0,46 0,48
4
225–300
25 35
0,13 0,18 0,23 0,25 0,36 0,41 0,46 0,51
300–350
20 30
0,10 0,18 0,23 0,25 0,36 0,41 0,46 0,51
350–400
15 25
0,08 0,15 0,20 0,23 0,30 0,36 0,41 0,46
5
100–150
45 –
0,15 0,25 0,30 0,36 0,46 0,53 0,56 0,61
150–250
40 60
0,13 0,23 0,25 0,30 0,41 0,48 0,51 0,56
250–350
30 50
0,10 0,20 0,23 0,25 0,36 0,43 0,46 0,51
6
150–200
25 –
0,13 0,15 0,20 0,25 0,30 0,38 0,41 0,43
200–250
20 –
0,10 0,15 0,20 0,25 0,30 0,38 0,41 0,43
250–300
15 20
0,10 0,13 0,18 0,20 0,25 0,33 0,36 0,38
300–350
–15
0,08 0,10 0,15 0,18 0,23 0,30 0,33 0,36
M1
135–185
25 35
0,15 0,20 0,23 0,28 0,36 0,41 0,46 0,51
185–275
30 30
0,13 0,18 0,20 0,25 0,30 0,36 0,41 0,46
275–350
–25
0,13 0,15 0,18 0,23 0,28 0,33 0,38 0,43
K1,2
120–150
55 80
0,20 0,30 0,41 0,51 0,61 0,69 0,74 0,79
150–200
45 75
0,18 0,28 0,36 0,46 0,56 0,64 0,69 0,74
200–220
40 65
0,15 0,23 0,30 0,41 0,46 0,53 0,58 0,64
220–260
35 55
0,13 0,18 0,23 0,30 0,36 0,43 0,48 0,53
260–320
30 45
0,10 0,15 0,18 0,23 0,30 0,36 0,41 0,46
N1
–
180 –
0,18 0,30 0,38 0,48 0,53 0,61 0,64 0,66
–
90 –
0,20 0,33 0,41 0,51 0,56 0,64 0,66 0,69
S1
140–210
–15
0,13 0,18 0,20 0,25 0,30 0,38 0,41 0,43
210–280
–10
0,10 0,15 0,18 0,20 0,25 0,30 0,33 0,36
280–340
–10
0,10 0,13 0,15 0,18 0,23 0,28 0,30 0,33
WID_Master16_Holemaking_ModularDrills_U038_U039_Metric_REBRAND.indd 38 11/2/15 3:53 PM
LViWID M 16 H l ki M d l D ill U038 U039 M i REBRANDN b 220153 40PM
Classes to Suit Everyone
Doing things the same way year after year can stall productivity. Continuing education
and training in the latest machining practices are necessary to stay competitive.
The Knowledge Center offers several ways to get trained: industry- and application-specifi c
courses, customer onsite programs, and online-based certifi ed metalcutting professional
courses. In-person classes include lecture, lab, and machining demonstrations.
Regional Training
The Regional Application Engineering Program is designed to provide a broad base of
knowledge for the selection and use of metalcutting tools. Instruction includes lecture-style
presentations and video demonstrations. Participants receive notes and text materials,
and the video demonstrations reinforce the theories presented in the lecture.
The Comprehensive Metalworking Application Course provides a broad base
of knowledge for the selection and use of metalcutting tools. Lecture-style
presentations and laboratory demonstrations enhance course material through
actual cutting tests and reinforce the theories presented in the lecture.
Metalcutting Application Training
WIDIA™ Knowledge Center
For more information, contact your local WIDIA
Authorised Distributor or visit widia.com/services.
WID_Master16_Holemaking_ModularDrills_U038_U039_Metric_REBRAND.indd 39 11/2/15 3:53 PM
U40
LViWID M 16 H l ki M d l D ill U040 U041 M i REBRANDN b 25 20159 14AM
widia.com
Spade Blade Holders
Straight Shank
Straight Flute Holders • Inch • Medium
D1 D1 max
medium mm in mm in L L1 L4 max LS D
seat
size CS
insert
screw
Torx
wrench
7SZSM 11,10 .437 12,90 .508 6.76 4.38 2.08 2.38 .750 Z 1/8 - 27 NPT 56-1015 56-2026
7S0SM 12,93 .509 17,65 .695 7.71 5.33 2.93 2.38 .750 0 1/8 - 27 NPT 56-1014 56-2017
7S0.5SM 15,47 .609 17,65 .695 7.71 5.33 2.90 2.38 .750 — 1/8 - 27 NPT 56-1014 56-2017
7S1SM 17,53 .690 24,38 .960 9.18 6.80 4.20 2.38 1.000 1 1/4 - 18 NPT 56-1020 56-2028
7S1.5SM 21,82 .859 24,38 .960 9.18 6.80 4.12 2.38 1.000 1.5 1/4 - 18 NPT 56-1020 56-2028
7S2SM 24,41 .961 35,05 1.380 10.38 7.94 5.15 2.44 1.250 2 1/4 - 18 NPT 56-1018 56-2015
7S2.5SM 30,15 1.187 35,05 1.380 10.38 7.94 5.03 2.44 1.250 2.5 1/4 - 18 NPT 56-1020 56-2028
7S3SM 35,08 1.381 47,73 1.879 13.88 11.25 7.89 2.63 1.500 3 1/4 - 18 NPT 56-1585 56-2020
7S4SM 47,75 1.880 65,28 2.570 15.38 12.75 9.57 2.63 1.500 4 1/4 - 18 NPT 56-1585 56-2020
7S5SM 63,50 2.500 88,90 3.500 18.25 15.00 11.38 3.25 2.000 5 1/4 - 18 NPT 56-1025 56-2125
7S7SM 88,93 3.501 114,30 4.500 21.25 14.62 11.50 6.63 3.000 7 1/4 - 18 NPT 56-1025 56-2125
Straight Flute Holders • Inch • Short
D1 D1 max
short mm in mm in L L1 L4 max LS D
seat
size CS
insert
screw
Torx
wrench
7SZSS 11,10 .437 12,90 .508 5.75 3.37 1.09 2.38 .750 Z 1/8 - 27 NPT 56-1015 56-2026
7S0SS 12,93 .509 17,65 .695 6.35 3.97 1.85 2.38 .750 0 1/8 - 27 NPT 56-1014 56-2017
7S0.5SS 15,47 .609 17,65 .695 6.35 3.97 1.76 2.38 .750 — 1/8 - 27 NPT 56-1014 56-2017
7S1SS 17,53 .690 24,38 .960 7.23 4.85 2.25 2.38 1.000 1 1/4 - 18 NPT 56-1020 56-2028
7S1.5SS 21,82 .859 24,38 .960 7.23 4.85 2.17 2.38 1.000 1.5 1/4 - 18 NPT 56-1020 56-2028
7S2SS 24,41 .961 35,05 1.380 8.00 5.56 2.77 2.44 1.250 2 1/4 - 18 NPT 56-1018 56-2015
7S2.5SS 30,15 1.187 35,05 1.380 8.00 5.56 3.59 2.44 1.250 2.5 1/4 - 18 NPT 56-1018 56-2015
7S3SS 35,08 1.381 47,73 1.879 9.88 7.25 3.76 2.63 1.500 3 1/4 - 18 NPT 56-1585 56-2020
7S4SS 47,75 1.880 65,28 2.570 11.38 8.75 6.21 2.63 1.500 4 1/4 - 18 NPT 56-1585 56-2020
7S5SS 63,50 2.500 88,90 3.500 12.50 9.25 5.36 3.25 2.000 5 1/4 - 18 NPT 56-1025 56-2125
Modular Drills
WID_Master16_Holemaking_ModularDrills_U040_U041_Metric_REBRAND.indd 40 11/25/15 9:18 AM
U41
LViWID M 16 H l ki M d l D ill U040 U041 M i REBRANDN b 2520159 14AM
widia.com
Straight Flute Holders • Inch • Long
Straight Flute Holders • Inch • Extra Long
D1 D1 max
long mm in mm in L L1 L4 max LS D
seat
size CS
insert
screw
Torx
wrench
7SZSL 11,10 .437 12,90 .508 7.76 5.38 3.10 2.38 .750 Z 1/8 - 27 NPT 56-1015 56-2026
7S0SL 12,93 .509 17,65 .695 9.13 6.75 4.60 2.38 .750 0 1/8 - 27 NPT 56-1014 56-2017
7S0.5SL 15,47 .609 17,65 .695 9.13 6.75 7.36 2.38 .750 — 1/8 - 27 NPT 56-1014 56-2017
7S1SL 17,53 .690 24,38 .960 11.10 8.72 6.34 2.38 1.000 1 1/4 - 18 NPT 56-1020 56-2028
7S2SL 24,41 .961 35,05 1.380 12.75 10.31 7.86 2.44 1.250 2 1/4 - 18 NPT 56-1018 56-2015
7S3SL 35,08 1.381 47,73 1.879 18.63 16.00 13.28 2.63 1.500 3 1/4 - 18 NPT 56-1585 56-2020
7S4SL 47,75 1.880 65,28 2.570 21.50 18.87 15.89 2.63 1.500 4 1/4 - 18 NPT 56-1585 56-2020
7S7SL 88,93 3.501 114,30 4.500 29.50 22.88 19.25 6.63 3.000 7 1/4 - 18 NPT 56-1025 56-2125
D1 D1 max
extra long mm in mm in L L1 L4 max LS D
seat
size CS
insert
screw
Torx
wrench
7S0SE 12,93 .509 17,65 .695 12.17 9.80 7.44 2.38 .750 0 1/8 - 27 NPT 56-1014 56-2017
7S0.5SE 15,47 .609 17,65 .695 12.17 9.80 7.60 2.38 .750 — 1/8 - 27 NPT 56-1014 56-2017
7S1SE 17,53 .690 24,38 .960 15.12 12.75 5.67 2.38 1.000 1 1/4 - 18 NPT 56-1020 56-2028
7S1.5SE 21,82 .859 24,38 .960 15.13 12.75 10.29 2.38 1.000 1.5 1/4 - 18 NPT 56-1020 56-2028
7S2SE 24,41 .961 35,05 1.380 15.82 13.38 11.07 2.44 1.250 2 1/4 - 18 NPT 56-1018 56-2015
7S3SE 35,08 1.381 47,73 1.879 25.51 22.88 20.16 2.63 1.500 3 1/4 - 18 NPT 56-1585 56-2020
7S4SE 47,75 1.880 65,28 2.570 — — 15.89 2.63 1.500 4 1/4 - 18 NPT 56-1585 56-2020
Spade Blade Holders
Straight Shank
Modular Drills
WID_Master16_Holemaking_ModularDrills_U040_U041_Metric_REBRAND.indd 41 11/25/15 9:18 AM
U42
LViWID M 16 H l ki M d l D ill U042 U043 M i REBRANDN b 25 20159 15AM
widia.com
Spade Blade Holders
Straight Shank
Straight Flute Holders • Metric • Medium
D1 D1 max
medium mm in mm in L L1 L4 max LS D
seat
size
insert
screw
Torx
wrench
8S0SM 13,00 .512 17,50 .689 6.01 4.00 2.76 2.01 .787 0 56-1014 FT7
8S1SM 17,86 .703 24,00 .945 8.58 6.33 4.16 2.24 .984 1 56-1020 FT8
8S2SM 24,61 .969 35,00 1.378 9.53 7.13 4.72 2.40 1.260 2 56-1018 FT15
8S3SM 35,72 1.406 47,63 1.875 11.11 8.31 5.32 2.80 1.575 3 56-1585 FT20
Straight Flute Holders • Metric • Short
D1 D1 max
short mm in mm in L L1 L4 max LS D
seat
size
insert
screw
Torx
wrench
8S0SS 13,00 .512 17,50 .689 4.88 2.88 1.91 2.01 .787 0 56-1014 FT7
8S1SS 17,86 .703 24,00 .945 6.53 4.33 2.16 2.24 .984 1 56-1020 FT8
8S2SS 24,61 .969 35,00 1.378 7.49 5.13 2.72 2.40 1.260 2 56-1585 FT15
8S4SS 48,00 1.890 65,09 2.563 10.08 7.32 3.97 2.80 1.575 4 56-1585 FT20
Modular Drills
WID_Master16_Holemaking_ModularDrills_U042_U043_Metric_REBRAND.indd 42 11/25/15 9:18 AM
U43
LViWID M 16 H l ki M d l D ill U042 U043 M i REBRANDN b 2520159 15AM
widia.com
Spade Blade Holders
Straight Shank
Straight Flute Holders • Metric • Long
Straight Flute Holders • Metric • Extra Long
D1 D1 max
long mm in mm in L L1 L4 max LS D
seat
size CS
insert
screw
Torx
wrench
8S0SL 12,93 .509 17,53 .690 8.01 6.00 4.13 2.01 .787 0 R1/8 56-1014 FT7
8S1SL 17,86 .703 24,00 .945 10.53 8.33 6.16 2.24 .984 1 — 56-1020 FT8
8S2SL 24,61 .969 35,00 1.378 11.53 9.13 6.72 2.40 1.260 2 — 56-1018 FT15
D1 D1 max
extra long mm in mm in L L1 L4 max LS D
seat
size
insert
screw
Torx
wrench
8S2SE 24,61 .969 35,00 1.378 18.17 15.76 14.27 2.40 1.260 2 56-1018 FT15
Modular Drills
WID_Master16_Holemaking_ModularDrills_U042_U043_Metric_REBRAND.indd 43 11/25/15 9:18 AM
U44
LViWID M 16 H l ki M d l D ill U044 U045 M i REBRANDN b 25 20159 15AM
widia.com
Spade Blade Holders
Taper Shank
Straight Flute Holders • Medium
D1 D1 max
medium mm in mm in L L1 L4 max LS
CSMS
system size
seat
size CS
insert
screw
Torx
wrench
7S0TM 12,93 .509 17,65 .695 8.46 5.52 3.20 3.13 2 0 8 - 32 56-1014 56-2017
7S1TM 17,53 .690 24,38 .960 10.68 6.99 4.43 3.88 3 1 1/4 - 20 56-1020 56-2028
7S1.5TM 21,82 .859 24,38 .960 10.68 6.80 4.35 3.88 3 1.5 1/4 - 20 56-1020 56-2028
7S2TM 24,41 .961 35,05 1.380 11.82 8.13 5.49 3.88 3 2 1/4 - 20 56-1018 56-2015
7S2.5TM-4MT 30,15 1.187 35,05 1.380 12.82 8.19 5.38 4.88 4 2.5 5/16-18 56-1018 56-2015
7S3TM 35,08 1.381 47,73 1.879 16.13 11.50 8.34 4.88 4 3 5/16-18 56-1585 56-2020
7S4TM 47,75 1.880 65,28 2.570 17.63 13.00 9.58 4.88 4 4 5/16-18 56-1585 56-2020
7S5TM 63,50 2.500 88,90 3.500 21.13 15.25 11.38 6.13 5 5 1/2 - 13 56-1025 56-2125
7S7TM 88,93 3.501 114,30 4.500 22.28 16.40 11.50 6.13 5 7 1/2 - 13 56-1025 56-2125
NOTE: CSMS = Morse taper size.
Straight Flute Holders • Short
D1 D1 max
short mm in mm in L L1 L4 max LS
CSMS
system size
seat
size CS
insert
screw
Torx
wrench
7SZTS 11,10 .437 12,90 .508 6.50 3.56 1.30 3.13 2 Z 8 - 32 56-1015 56-2026
7S1TS 17,53 .690 24,38 .960 8.73 5.04 2.48 3.88 3 1 1/4 - 20 56-1020 56-2028
7S2TS 24,41 .961 35,05 1.380 9.44 5.75 3.11 3.88 3 2 1/4 - 20 56-1018 56-2015
7S2.5TS 30,15 1.187 35,05 1.380 9.44 5.56 3.00 3.88 3 2.5 1/4 - 20 56-1018 56-2015
7S3TS 35,08 1.381 47,73 1.879 12.13 7.50 4.21 4.88 4 3 5/16-18 56-1585 56-2020
7S4TS 47,75 1.880 65,28 2.570 13.62 9.00 5.60 4.88 4 4 5/16-18 56-1585 56-2020
7S5TS 63,50 2.500 88,90 3.500 15.38 9.50 5.63 6.13 5 5 1/2 - 13 56-1025 56-2125
NOTE: CSMS = Morse taper size.
Modular Drills
• Through coolant must be used with spade drills depths greater
than 1 x D.
• Direct spindle cooling is preferable when using WIDIA
™
Spade Blades.
• If spindle cooling is unavailable, then coolant glands or inducers should
be used to provide through coolant capability.
• Our holders provide both options; please nd available coolant
glants below.
WID_Master16_Holemaking_ModularDrills_U044_U045_Metric_REBRAND.indd 44 11/25/15 9:18 AM
U45
LViWID M 16 H l ki M d l D ill U044 U045 M i REBRANDN b 2520159 15AM
widia.com
Spade Blade Holders
Taper Shank
Straight Flute Holders • Long
Straight Flute Holders • Extra Long
D1 D1 max
long mm in mm in L L1 L4 max LS
CSMS
system size
seat
size CS
insert
screw
Torx
wrench
7SZTL 11,10 .437 12,90 .508 8.51 5.57 3.30 3.13 2 Z 8 - 32 56-1015 56-2026
7S0TL 12,93 .509 17,65 .695 9.88 6.94 4.60 3.13 2 0 8 - 32 56-1014 56-2017
7S1TL 17,53 .690 24,38 .960 12.60 8.91 6.36 3.88 3 1 1/4 - 20 56-1020 56-2028
7S2TL 24,41 .961 35,05 1.380 14.19 10.50 7.86 3.88 3 2 1/4 - 20 56-1018 56-2015
7S3TL 35,08 1.381 47,73 1.879 20.88 16.25 13.28 4.88 4 3 5/16-18 56-1585 56-2020
7S4TL 47,75 1.880 65,28 2.570 23.75 19.12 15.90 4.88 4 4 5/16-18 56-1585 56-2020
7S5TL 63,50 2.500 88,90 3.500 26.88 21.00 17.13 6.13 5 5 1/2 - 13 56-1025 56-2125
7S7TL 88,93 3.501 114,30 4.500 30.53 24.65 19.75 6.13 5 7 1/2 - 13 56-1025 56-2125
D1 D1 max
extra long mm in mm in L L1 L4 max LS
CSMS
system size
seat
size CS
insert
screw
Torx
wrench
7S0TE 12,93 .509 17,65 .695 12.93 10.00 7.65 3.13 2 0 8 - 32 56-1014 56-2017
7S0.5TE 15,47 .609 17,65 .695 12.93 9.80 7.60 3.13 2 — 8 - 32 56-1014 56-2017
7S2TE 24,41 .961 35,05 1.380 17.26 13.57 11.07 3.88 3 2 1/4 - 20 56-1018 56-2015
NOTE: CSMS = Morse taper size.
NOTE: CSMS = Morse taper size.
Modular Drills
WID_Master16_Holemaking_ModularDrills_U044_U045_Metric_REBRAND.indd 45 11/25/15 9:18 AM
• Find a Local WIDIA™ Authorized Distributor near you.
• Contact our Customer Application Support team for technical support
and product recommendations.
• Log in to NOVO™ for instant access to inventory availability, application
recommendations, CAD drawings, and 3D models.
• Purchase WIDIA-branded merchandise.
• Get social with us on Facebook, Twitter, Instagram, YouTube, and more!
Visit our homepage at widia.com to:
We are here to serve you.
On the Web
You can also use our NOVO app to guide you
to the correct choice!
For more information, please visit widia.com/novo.
NOVO: The Digital Source for Delivering
Smart Machining Solutions
For more information, contact your local WIDIA
Authorised Distributor or visit widia.com/services.
WID_Master16_Holemaking_ModularDrills_U046_U047_Metric_REBRAND.indd 2 11/13/15 2:28 PM
HydroForce™
HT Chuck
• HydroForce gives you an unmatched combination of accuracy and clamping forces.
• Compact and stable design.
• Advanced hydraulic clamping with lowest runout and superior vibration dampening.
• Balanced quality to lower vibration, especially at high speeds.
• Focused and fl exible product offering.
HydroForce™ HT Chuck High Torque for High Metal
Removal Rates (MRR) and Superior Surface Finish
To learn more about our innovations, contact your local
Authorised Distributor or visit www.widia.com.
WID_Master16_Holemaking_ModularDrills_U046_U047_Metric_REBRAND.indd 3 11/13/15 2:28 PM
LViWID M 16 H l ki I d bl D ill V000 V001 M i REBRANDD b 14 20152 34PM
WID_Master16_Holemaking_IndexableDrills_V000_V001_Metric_REBRAND.indd 1 12/14/15 2:41 PM
V1
LViWID M 16 H l ki I d bl D ill V000 V001 M i REBRANDD b 1420152 34PM
widia.com
Holemaking • Indexable Drills
Introduction ........................................................................................................................................................... V2–V3
Top Cut 4 ............................................................................................................................................................. V4–V40
WID_Master16_Holemaking_IndexableDrills_V000_V001_Metric_REBRAND.indd 1 12/14/15 2:41 PM
V2
LViWID M 16 H l ki I d bl D ill V002 V003 M i REBRANDN b 12 201510 12AM
widia.com
Tool Selection Guide for Indexable Drills
standard
hole
tolerance
standard range customised solution range
diameter range
drilling
depth L/D1
diameter range
drilling
depth
D1 mm D1 in D1 mm D1 inch
PMKNSH min–max min–max min–max min–max
Top Cut 4™
Indexable Drill Body
Short Hole Drilling
IT9–11 12–68 .473–2.5
2 x D
3 x D
4 x D
5 x D
12–110 .473–4.33 2–5 x D 2)
In regard to insert and drill coatings, anything is possible. If a specific insert or drill is not suitable for your workpiece material,
please contact our Engineered Solutions Department for an offer about special coatings and edge preparations.
*Except for L/D 5 x D.
1) Other shank styles available as customised solution.
2) Dependent on the application, up to 6 x D is possible.
rst choice
alternate choice
WID_Master16_Holemaking_IndexableDrills_V002_V003_Metric_REBRAND.indd 2 11/12/15 12:00 PM
V3
LViWID M 16 H l ki I d bl D ill V002 V003 M i REBRANDN b 12201510 12AM
widia.com
Tool Selection Guide for Indexable Drills
* V8–V23
Coolant
page(s)
standard capabilities
1)
standard customised solution capabilities
WID_Master16_Holemaking_IndexableDrills_V002_V003_Metric_REBRAND.indd 3 11/12/15 12:00 PM
V4
LViWID M 16 H l ki I d bl D ill V004 V005 M i REBRANDN b 10 20153 24PM
widia.com
WIDIA™ Top Cut 4™ •
New Generation Indexable Drilling System
The new WIDIA Top Cut 4 (TC4) portfolio is a broad offering for customers looking
for a versatile indexable drilling platform.
The newly developed TC4 features improved centring capabilities and inserts with
four cutting edges for both pocket seats (central and periphery). This, in combination
with the renowned WIDIA grade technology, leads to outstanding fl exibility and effi ciency.
The TC4 platform offers three easy-to-select grades and two geometries applicable for steel,
cast iron, and stainless steel materials. It covers the diameter range from 12–68mm
within the standard offering in L/D ratios of 2–5 x D.
Top Cut 4
WID_Master16_Holemaking_IndexableDrills_V004_V005_Metric_REBRAND.indd 4 11/10/15 5:01 PM
V5
LViWID M 16 H l ki I d bl D ill V004 V005 M i REBRANDN b 1020153 24PM
widia.com
One Comprehensive Platform
• Standard diameter range covering 12–68mm in 2 x D, 3 x D,
4 x D, and 5 x D.
• Four real cutting edges each for entire platform.
• Eight insert sizes to cover complete diameter range.
Easy to Apply
• No risk of mixing up inner and outer insert due to clear visual differences.
• Easy-to-change inserts, laser marked with geometries and grades.
• Easy-to-use nomenclature guide enabling the tool body and the related
insert selection to avoid order failures.
Highly Versatile
• Breadth of application capabilities include through and cross holes, inclined
entry and exit opportunity, 45º corner, half cylindrical, concave, or chain drilling.
• Various geometries and grades available.
Highest Performance
• 2x four true cutting edges.
• Cutting edge profile of central and periphery insert work together, leading to high
stabilisation of the drill, preventing drifting of the tool even on irregular surfaces.
• X-offset design to adjust diameter size on turning machines and optimise tolerances
on machining centres.
• Apply where speed and economy are prime considerations.
• Three grades to achieve higher tool life at accelerated speeds:
– WU25CH grade for highest metal removal rate in general applications.
– WU40PH grade for high toughness demands.
– WPK10CH grade for high-speed applications.
WID_Master16_Holemaking_IndexableDrills_V004_V005_Metric_REBRAND.indd 5 11/10/15 5:01 PM
V6
LViWID M 16 H l ki I d bl D ill V006 V007 M i REBRANDO b 15 20154 50PM
widia.com
Indexable Drills
Top Cut 4™ Catalogue Numbering System
TCF 250 R 3 SL 32 M D
Tool Family
Top Cut 4
Diameter
Metric =
3 digits
(e.g. 250 =
25mm)
Inch =
4 digits (e.g.
2500 = 2.5")
Right-Hand
Cutting
Length
Diameter
Ratio
L/D = 3 x D
Shank Style
SL =
Side Lock
Adaptor
Shank Size Metric Insert Size
Metric Body
The guide below provides an example of how to select the
Top Cut 4 tool body and accompanying inserts for a stable steel drilling application.
TCF 08 03 08 D P V34 WU25CH
Tool Family
Top Cut 4
Size
In-Circle D1
Insert
Thickness
Insert
Corner
Radius
Insert Size Insert
Positioning
C =
Central
P =
Periphery
Insert
Geometry
Grade
WU25CH
WU40PH
WPK10C H
WIDIA™Material
Range
U = Universal
P = Steel
K = Cast Iron
Toughness
Range
Choose high
numbers for
toughness
in stable
conditions,
low numbers
for high wear
resistance at
continuous
cuts.
Coating
P = PVD
C = CVD
Application
H =
Holemaking
Periphery Insert
Insert Guide for Grades
Insert Geometry – V34 for steel or cast iron or V36 for stainless steel and long chipping steel.
WID_Master16_Holemaking_IndexableDrills_V006_V007_Metric_REBRAND.indd 6 10/29/15 1:26 PM
V7
LViWID M 16 H l ki I d bl D ill V006 V007 M i REBRANDO b 1520154 50PM
widia.com
Indexable Drills
Grades and Grade Descriptions
P
WPK10CH
K
wear resistance
toughness
P
WU25CH
M
K
P
WU40PH
M
K
Coatings provide high-speed
capability and are engineered
for fi nishing to light roughing.
PSteel
MStainless Steel
KCast Iron
NNon-Ferrous
SHigh-Temp Alloys
HHardened Materials
WPK10CH:
High-Speed Grade
WU25CH:
High Metal Removal Rate Grade
WU40PH:
High Toughness Grade
Grade
wear
resistance toughness
Coating Grade Description 05 10 15 20 25 30 35 40 45
WPK10CH
Composition: With an advanced CVD TiCN-Al2O3 coating combined with
a cobalt-enriched carbide substrate, this grade offers a balanced combination
of deformation-resistance and edge toughness.
Application: Offers outstanding abrasion and crater wear resistance for high-speed
machining of steels and cast irons. Use for very high cutting speeds with low to
medium feed rates.
P
K
WU25CH
Composition: Advanced CVD TiCN-Al2O3 coating together with a newly engineered
tough carbide substrate. Ensures adequate deformation resistance and excellent
edge strength and offers very good wear resistance over a wide range of
machining conditions.
Application: A high productivity grade with high speeds and feeds. First choice
for high productivity with very good reliability in steels, stainless steels,
and cast iron rates.
P
M
K
WU40PH
Composition: With a multilayered PVD TiN-TiAlN coating and a tough substrate,
this grade withstands interruptions and provides high wear resistance for long tool life.
Application: First choice for high reliability in most materials. This grade should be
used at medium speeds and high feeds due to sharper edges and as a grade for high-
toughness applications. It covers steel, stainless steel, cast iron, and high-temp alloys
under certain conditions.
P
M
K
TiCN-Al2O3
TiCN-Al2O3
TiCN-Al2O3
WID_Master16_Holemaking_IndexableDrills_V006_V007_Metric_REBRAND.indd 7 10/29/15 1:26 PM
V8
LViWID M 16 H l ki I d bl D ill V008 V009 M i REBRANDO b 15 20154 51PM
widia.com
Indexable Drills
Indexable Drills
Top Cut 4™ Shanks
Top Cut 4 Drill • Metric • 2 x D • SL Shanks
(continued)
order number catalogue number D1 D1 max D L1 L4 max L5
insert
size
periphery
insert
centre
insert
5537778 TCF120R2SL20MA 12,00 12,50 20 54,6 24,0 0,41 A TCF040204AP TCF040203AC
5537779 TCF125R2SL20MA 12,50 13,00 20 55,8 25,0 0,48 A TCF040204AP TCF040203AC
5537860 TCF127R2SL20MA 12,70 13,20 20 56,2 26,0 0,51 A TCF040204AP TCF040203AC
5537861 TCF130R2SL20MA 13,00 13,50 20 56,9 26,0 0,56 A TCF040204AP TCF040203AC
5537862 TCF135R2SL20MA 13,50 14,00 20 58,1 27,0 0,64 A TCF040204AP TCF040203AC
5577828 TCF140R2SL25MB 14,00 14,50 25 59,8 28,0 0,42 B TCF050204BP TCF060203BC
5577829 TCF145R2SL25MB 14,50 15,00 25 60,9 29,0 0,45 B TCF050204BP TCF060203BC
5577920 TCF150R2SL25MB 15,00 15,50 25 62,1 30,0 0,49 B TCF050204BP TCF060203BC
5577921 TCF155R2SL25MB 15,50 16,00 25 63,3 31,0 0,54 B TCF050204BP TCF060203BC
5577922 TCF160R2SL25MB 16,00 16,50 25 64,4 32,0 0,60 B TCF050204BP TCF060203BC
5577923 TCF165R2SL25MB 16,50 17,00 25 65,6 33,0 0,68 B TCF050204BP TCF060203BC
5577924 TCF170R2SL25MB 17,00 17,50 25 68,4 34,0 0,74 B TCF050204BP TCF060203BC
5577925 TCF175R2SL25MB 17,50 18,00 25 69,6 35,0 0,79 B TCF050204BP TCF060203BC
5577926 TCF180R2SL25MB 18,00 18,50 25 70,8 36,0 0,86 B TCF050204BP TCF060203BC
5577927 TCF185R2SL25MB 18,50 19,00 25 71,9 37,0 0,83 B TCF050204BP TCF060203BC
5578820 TCF190R2SL25MC 19,00 19,50 25 72,1 38,0 0,60 C TCF070306CP TCF070304CC
5578821 TCF195R2SL25MC 19,50 20,00 25 73,2 39,0 0,70 C TCF070306CP TCF070304CC
5578822 TCF200R2SL25MC 20,00 20,50 25 74,4 40,0 0,70 C TCF070306CP TCF070304CC
5578823 TCF205R2SL25MC 20,50 21,00 25 75,6 41,0 0,70 C TCF070306CP TCF070304CC
5578824 TCF210R2SL25MC 21,00 21,50 25 76,7 42,0 0,80 C TCF070306CP TCF070304CC
5578825 TCF220R2SL25MC 22,00 22,50 25 79,0 44,0 1,00 C TCF070306CP TCF070304CC
5578826 TCF225R2SL25MC 22,50 23,00 25 80,2 45,0 1,10 C TCF070306CP TCF070304CC
5578827 TCF230R2SL25MC 23,00 23,50 25 81,4 46,0 1,10 C TCF070306CP TCF070304CC
5537167 TCF240R2SL25MD 24,00 25,00 25 87,2 48,0 0,78 D TCF080308DP TCF090305DC
5537168 TCF250R2SL32MD 25,00 26,00 32 89,6 50,0 0,86 D TCF080308DP TCF090305DC
5537169 TCF260R2SL32MD 26,00 27,00 32 91,9 52,0 0,97 D TCF080308DP TCF090305DC
5537820 TCF265R2SL32MD 26,50 27,50 32 93,0 53,0 1,05 D TCF080308DP TCF090305DC
5537821 TCF270R2SL32MD 27,00 28,00 32 94,2 54,0 1,15 D TCF080308DP TCF090305DC
5537822 TCF280R2SL32MD 28,00 29,00 32 96,5 56,0 1,30 D TCF080308DP TCF090305DC
5537823 TCF290R2SL32MD 29,00 30,00 32 98,8 58,0 1,45 D TCF080308DP TCF090305DC
5537937 TCF300R2SL32ME 30,00 31,00 32 100,2 60,0 0,63 E TCF100408EP TCF120405EC
5537938 TCF310R2SL32ME 31,00 32,00 32 102,5 62,0 0,72 E TCF100408EP TCF120405EC
For information on LS, see the table on page V10.
WID_Master16_Holemaking_IndexableDrills_V008_V009_Metric_REBRAND.indd 8 10/29/15 1:26 PM
V9
LViWID M 16 H l ki I d bl D ill V008 V009 M i REBRANDO b 1520154 51PM
widia.com
Indexable Drills
Indexable Drills
Top Cut 4™ Shanks
(Top Cut 4 Drill • Metric • 2 x D • SL Shanks — continued)
order number catalogue number D1 D1 max D L1 L4 max L5
insert
size
periphery
insert
centre
insert
5537939 TCF320R2SL32ME 32,00 33,00 32 104,8 64,0 0,82 E TCF100408EP TCF120405EC
5537940 TCF330R2SL40ME 33,00 34,00 40 107,1 66,0 0,95 E TCF100408EP TCF120405EC
5537941 TCF340R2SL40ME 34,00 35,00 40 109,4 68,0 1,14 E TCF100408EP TCF120405EC
5537942 TCF350R2SL40ME 35,00 36,00 40 111,8 70,0 1,30 E TCF100408EP TCF120405EC
5537943 TCF360R2SL40ME 36,00 37,00 40 114,1 72,0 1,45 E TCF100408EP TCF120405EC
5578539 TCF370R2SL40MF 37,00 38,00 40 118,1 74,0 1,19 F TCF120412FP TCF150406FC
5578600 TCF375R2SL40MF 37,50 38,50 40 119,3 75,0 1,23 F TCF120412FP TCF150406FC
5578601 TCF380R2SL40MF 38,00 39,00 40 120,5 76,0 1,27 F TCF120412FP TCF150406FC
5578602 TCF390R2SL40MF 39,00 40,00 40 122,8 78,0 1,36 F TCF120412FP TCF150406FC
5578603 TCF400R2SL40MF 40,00 41,00 40 125,1 80,0 1,47 F TCF120412FP TCF150406FC
5578604 TCF410R2SL40MF 41,00 42,00 40 127,4 82,0 1,60 F TCF120412FP TCF150406FC
5578605 TCF420R2SL40MF 42,00 43,00 40 129,7 84,0 1,77 F TCF120412FP TCF150406FC
5578606 TCF430R2SL40MF 43,00 44,00 40 132,1 86,0 1,99 F TCF120412FP TCF150406FC
5578607 TCF440R2SL40MF 44,00 45,00 40 134,4 88,0 2,10 F TCF120412FP TCF150406FC
5578608 TCF450R2SL50MF 45,00 46,00 50 136,7 90,0 2,21 F TCF120412FP TCF150406FC
5578694 TCF460R2SL50MG 46,00 47,00 50 139,0 92,0 1,45 G TCF150512GP TCF180508GC
5578695 TCF470R2SL50MG 47,00 48,00 50 141,3 94,0 1,53 G TCF150512GP TCF180508GC
5578696 TCF480R2SL50MG 48,00 49,00 50 143,7 96,0 1,63 G TCF150512GP TCF180508GC
5578697 TCF490R2SL50MG 49,00 50,00 50 146,0 98,0 1,74 G TCF150512GP TCF180508GC
5578698 TCF500R2SL50MG 50,00 51,00 50 149,8 100,0 1,87 G TCF150512GP TCF180508GC
5578699 TCF505R2SL50MG 50,50 51,50 50 151,0 101,0 1,94 G TCF150512GP TCF180508GC
5578710 TCF510R2SL50MG 51,00 52,00 50 152,1 102,0 2,02 G TCF150512GP TCF180508GC
5578711 TCF520R2SL50MG 52,00 53,00 50 154,4 104,0 2,22 G TCF150512GP TCF180508GC
5578712 TCF530R2SL50MG 53,00 54,00 50 156,8 106,0 2,46 G TCF150512GP TCF180508GC
5578713 TCF540R2SL50MG 54,00 55,00 50 159,1 108,0 2,53 G TCF150512GP TCF180508GC
5578714 TCF550R2SL50MG 55,00 56,00 50 161,4 110,0 2,73 G TCF150512GP TCF180508GC
5578715 TCF560R2SL50MG 56,00 57,00 50 163,7 112,0 2,37 G TCF150512GP TCF180508GC
5538613 TCF570R2SL50MH 57,00 58,00 50 165,5 114,0 1,76 H TCF180614HP TCF210608HC
5538614 TCF580R2SL50MH 58,00 59,00 50 167,9 116,0 1,85 H TCF180614HP TCF210608HC
5538615 TCF590R2SL50MH 59,00 60,00 50 170,2 118,0 1,96 H TCF180614HP TCF210608HC
5538616 TCF600R2SL50MH 60,00 61,00 50 172,5 120,0 1,42 H TCF180614HP TCF210608HC
5538617 TCF610R2SL50MH 61,00 62,00 50 174,8 122,0 2,23 H TCF180614HP TCF210608HC
5538618 TCF620R2SL50MH 62,00 63,00 50 177,1 124,0 2,41 H TCF180614HP TCF210608HC
5538619 TCF630R2SL50MH 63,00 64,00 50 179,5 126,0 2,64 H TCF180614HP TCF210608HC
5538630 TCF640R2SL50MH 64,00 65,00 50 181,8 128,0 2,94 H TCF180614HP TCF210608HC
5538631 TCF650R2SL50MH 65,00 66,00 50 184,1 130,0 3,06 H TCF180614HP TCF210608HC
5538632 TCF660R2SL50MH 66,00 67,00 50 186,4 132,0 3,18 H TCF180614HP TCF210608HC
5538633 TCF670R2SL50MH 67,00 68,00 50 188,7 134,0 3,30 H TCF180614HP TCF210608HC
5538634 TCF680R2SL50MH 68,00 69,00 50 191,1 136,0 2,93 H TCF180614HP TCF210608HC
(continued)
WID_Master16_Holemaking_IndexableDrills_V008_V009_Metric_REBRAND.indd 9 10/29/15 1:26 PM
V10
LViWID M 16 H l ki I d bl D ill V010 V011 M i REBRANDO b 15 20154 52PM
widia.com
DLS
20,00 50
25,00 56
32,00 60
40,00 70
50,00 80
Spare Parts
WARNING
During through-hole operations, a slug or disc is produced
as the tool breaks through the workpiece. When the drill
is stationary and the workpiece is rotating, this slug may be
hurled from the chuck by centrifugal force. Provide adequate
shielding to protect bystanders.
insert
size
periphery
insert
centre
insert
insert screw
order number
Torx
size
Torx driver
order number
tightening
torque Nm
A TCF040204AP TCF040203AC 2025073 T5 2029221 0,40
B TCF050204BP TCF060203BC 1175225 T6 1138455 0,53
C TCF070306CP TCF070304CC 1021337 T7 2029266 0,90
D TCF080308DP TCF090305DC 1134385 T8 2029598 1,10
E TCF100408EP TCF120405EC 2018194 T9 1138430 2,00
F TCF120412FP TCF150406FC 1756815 T15 2029596 4,00
G TCF150512GP TCF180508GC 1099645 T20 2029488 6,30
H TCF180614HP TCF210608HC 1823871 T25 1022519 8,80
Indexable Drills
Top Cut 4™ Shanks
(Top Cut 4 Drill • Metric • 2 x D • SL Shanks — continued)
NOTE: Drilling in stacked plates possible in certain applications. Ask for technical support.
Drill shipped with insert screws and Torx wrench.
See pages V20–V23 for inserts.
SL = Side Lock
D1 max is an achievable diameter using x-offset.
Indexable Drills
WID_Master16_Holemaking_IndexableDrills_V010_V011_Metric_REBRAND.indd 10 10/29/15 1:26 PM
V11
LViWID M 16 H l ki I d bl D ill V010 V011 M i REBRANDO b 1520154 52PM
widia.com
Indexable Drills
Top Cut 4™ Shanks
Top Cut 4 Drill • Metric • 3 x D • SL Shanks
(continued)
order number catalogue number D1 D1 max D L1 L4 max L5
insert
size
periphery
insert
centre
insert
5537863 TCF120R3SL20MA 12,00 12,50 20 66,6 36,0 0,41 A TCF040204AP TCF040203AC
5537864 TCF125R3SL20MA 12,50 13,00 20 68,3 37,5 0,48 A TCF040204AP TCF040203AC
5537866 TCF127R3SL20MA 12,70 13,20 20 68,9 38,1 0,51 A TCF040204AP TCF040203AC
5537867 TCF130R3SL20MA 13,00 13,50 20 69,9 39,0 0,56 A TCF040204AP TCF040203AC
5537868 TCF135R3SL20MA 13,50 14,00 20 71,6 41,0 0,64 A TCF040204AP TCF040203AC
5577928 TCF140R3SL25MB 14,00 14,50 25 73,8 42,0 0,42 B TCF050204BP TCF060203BC
5577929 TCF145R3SL25MB 14,50 15,00 25 75,4 43,5 0,45 B TCF050204BP TCF060203BC
5577930 TCF150R3SL25MB 15,00 15,50 25 77,1 45,0 0,49 B TCF050204BP TCF060203BC
5577931 TCF155R3SL25MB 15,50 16,00 25 78,8 46,5 0,54 B TCF050204BP TCF060203BC
5577932 TCF160R3SL25MB 16,00 16,50 25 80,4 48,0 0,60 B TCF050204BP TCF060203BC
5577933 TCF165R3SL25MB 16,50 17,00 25 82,1 49,5 0,68 B TCF050204BP TCF060203BC
5577934 TCF170R3SL25MB 17,00 17,50 25 85,4 51,0 0,74 B TCF050204BP TCF060203BC
5577935 TCF175R3SL25MB 17,50 18,00 25 87,1 52,5 0,79 B TCF050204BP TCF060203BC
5577936 TCF180R3SL25MB 18,00 18,50 25 88,8 54,0 0,86 B TCF050204BP TCF060203BC
5577937 TCF185R3SL25MB 18,50 19,00 25 90,4 55,5 0,83 B TCF050204BP TCF060203BC
5578828 TCF190R3SL25MC 19,00 19,50 25 91,1 57,0 0,60 C TCF070306CP TCF070304CC
5578829 TCF195R3SL25MC 19,50 20,00 25 92,7 58,5 0,70 C TCF070306CP TCF070304CC
5578830 TCF200R3SL25MC 20,00 20,50 25 94,4 60,0 0,70 C TCF070306CP TCF070304CC
5578831 TCF205R3SL25MC 20,50 21,00 25 96,1 61,5 0,70 C TCF070306CP TCF070304CC
5578832 TCF210R3SL25MC 21,00 21,50 25 97,7 63,0 0,80 C TCF070306CP TCF070304CC
5578833 TCF220R3SL25MC 22,00 22,50 25 101,0 66,0 1,00 C TCF070306CP TCF070304CC
5578834 TCF225R3SL25MC 22,50 23,00 25 102,7 67,5 1,10 C TCF070306CP TCF070304CC
5578835 TCF230R3SL25MC 23,00 23,50 25 104,4 69,0 1,10 C TCF070306CP TCF070304CC
5537824 TCF240R3SL25MD 24,00 25,00 25 111,2 72,0 0,78 D TCF080308DP TCF090305DC
5537825 TCF250R3SL32MD 25,00 26,00 32 114,6 75,0 0,86 D TCF080308DP TCF090305DC
5537826 TCF260R3SL32MD 26,00 27,00 32 117,9 78,0 0,97 D TCF080308DP TCF090305DC
5537827 TCF265R3SL32MD 26,50 27,50 32 119,5 79,5 1,05 D TCF080308DP TCF090305DC
5537828 TCF270R3SL32MD 27,00 28,00 32 121,2 81,0 1,15 D TCF080308DP TCF090305DC
5537829 TCF280R3SL32MD 28,00 29,00 32 124,5 84,0 1,30 D TCF080308DP TCF090305DC
5537830 TCF290R3SL32MD 29,00 30,00 32 127,8 87,0 1,45 D TCF080308DP TCF090305DC
5537944 TCF300R3SL32ME 30,00 31,00 32 130,2 90,0 0,63 E TCF100408EP TCF120405EC
5537945 TCF310R3SL32ME 31,00 32,00 32 133,5 93,0 0,72 E TCF100408EP TCF120405EC
Indexable Drills
For information on LS, see the table on page V13.
WID_Master16_Holemaking_IndexableDrills_V010_V011_Metric_REBRAND.indd 11 10/29/15 1:26 PM
V12
LViWID M 16 H l ki I d bl D ill V012 V013 M i REBRANDO b 15 20154 52PM
widia.com
Indexable Drills
Top Cut 4™ Shanks
(Top Cut 4 Drill • Metric • 3 x D • SL Shanks — continued)
(continued)
order number catalogue number D1 D1 max D L1 L4 max L5
insert
size
periphery
insert
centre
insert
5537946 TCF320R3SL32ME 32,00 33,00 32 136,8 96,0 0,82 E TCF100408EP TCF120405EC
5537947 TCF330R3SL40ME 33,00 34,00 40 140,1 99,0 0,95 E TCF100408EP TCF120405EC
5537948 TCF340R3SL40ME 34,00 35,00 40 143,4 102,0 1,14 E TCF100408EP TCF120405EC
5537949 TCF350R3SL40ME 35,00 36,00 40 146,8 105,0 1,30 E TCF100408EP TCF120405EC
5537950 TCF360R3SL40ME 36,00 37,00 40 150,1 108,0 1,45 E TCF100408EP TCF120405EC
5578609 TCF370R3SL40MF 37,00 38,00 40 155,1 111,0 1,19 F TCF120412FP TCF150406FC
5578610 TCF375R3SL40MF 37,50 38,50 40 156,8 113,0 1,23 F TCF120412FP TCF150406FC
5578611 TCF380R3SL40MF 38,00 39,00 40 158,5 114,0 1,27 F TCF120412FP TCF150406FC
5578612 TCF390R3SL40MF 39,00 40,00 40 161,8 117,0 1,36 F TCF120412FP TCF150406FC
5578613 TCF400R3SL40MF 40,00 41,00 40 165,1 120,0 1,47 F TCF120412FP TCF150406FC
5578614 TCF410R3SL40MF 41,00 42,00 40 168,4 123,0 1,60 F TCF120412FP TCF150406FC
5578615 TCF420R3SL40MF 42,00 43,00 40 171,7 126,0 1,77 F TCF120412FP TCF150406FC
5578616 TCF430R3SL40MF 43,00 44,00 40 175,1 129,0 1,99 F TCF120412FP TCF150406FC
5578617 TCF440R3SL40MF 44,00 45,00 40 178,4 132,0 2,10 F TCF120412FP TCF150406FC
5578618 TCF450R3SL50MF 45,00 46,00 50 181,7 135,0 2,21 F TCF120412FP TCF150406FC
5578716 TCF460R3SL50MG 46,00 47,00 50 185,0 138,0 1,45 G TCF150512GP TCF180508GC
5578717 TCF470R3SL50MG 47,00 48,00 50 188,3 141,0 1,53 G TCF150512GP TCF180508GC
5578718 TCF480R3SL50MG 48,00 49,00 50 191,7 144,0 1,63 G TCF150512GP TCF180508GC
5578719 TCF490R3SL50MG 49,00 50,00 50 195,0 147,0 1,74 G TCF150512GP TCF180508GC
5578720 TCF500R3SL50MG 50,00 51,00 50 199,8 150,0 1,87 G TCF150512GP TCF180508GC
5578721 TCF505R3SL50MG 50,50 51,50 50 201,5 152,0 1,94 G TCF150512GP TCF180508GC
5578722 TCF510R3SL50MG 51,00 52,00 50 203,1 153,0 2,02 G TCF150512GP TCF180508GC
5578723 TCF520R3SL50MG 52,00 53,00 50 206,4 156,0 2,22 G TCF150512GP TCF180508GC
5578724 TCF530R3SL50MG 53,00 54,00 50 209,8 159,0 2,46 G TCF150512GP TCF180508GC
5578726 TCF540R3SL50MG 54,00 55,00 50 213,1 162,0 2,53 G TCF150512GP TCF180508GC
5578727 TCF550R3SL50MG 55,00 56,00 50 216,4 165,0 2,73 G TCF150512GP TCF180508GC
5578728 TCF560R3SL50MG 56,00 57,00 50 219,7 168,0 2,37 G TCF150512GP TCF180508GC
5538635 TCF570R3SL50MH 57,00 58,00 50 222,5 171,0 1,76 H TCF180614HP TCF210608HC
5538636 TCF580R3SL50MH 58,00 59,00 50 225,9 174,0 1,85 H TCF180614HP TCF210608HC
5538637 TCF590R3SL50MH 59,00 60,00 50 229,2 177,0 1,96 H TCF180614HP TCF210608HC
5538638 TCF600R3SL50MH 60,00 61,00 50 232,5 180,0 1,42 H TCF180614HP TCF210608HC
5538639 TCF610R3SL50MH 61,00 62,00 50 235,8 183,0 2,23 H TCF180614HP TCF210608HC
5538640 TCF620R3SL50MH 62,00 63,00 50 239,1 186,0 2,41 H TCF180614HP TCF210608HC
5538641 TCF630R3SL50MH 63,00 64,00 50 242,5 189,0 2,64 H TCF180614HP TCF210608HC
5538642 TCF640R3SL50MH 64,00 65,00 50 245,8 192,0 2,94 H TCF180614HP TCF210608HC
5538643 TCF650R3SL50MH 65,00 66,00 50 249,1 195,0 3,06 H TCF180614HP TCF210608HC
5538644 TCF660R3SL50MH 66,00 67,00 50 252,4 198,0 3,18 H TCF180614HP TCF210608HC
5538645 TCF670R3SL50MH 67,00 68,00 50 255,7 201,0 3,30 H TCF180614HP TCF210608HC
5538646 TCF680R3SL50MH 68,00 69,00 50 259,1 204,0 2,93 H TCF180614HP TCF210608HC
Indexable Drills
WID_Master16_Holemaking_IndexableDrills_V012_V013_Metric_REBRAND.indd 12 10/29/15 1:26 PM
V13
LViWID M 16 H l ki I d bl D ill V012 V013 M i REBRANDO b 1520154 52PM
widia.com
Spare Parts
WARNING
During through-hole operations, a slug or disc is produced
as the tool breaks through the workpiece. When the drill
is stationary and the workpiece is rotating, this slug may be
hurled from the chuck by centrifugal force. Provide adequate
shielding to protect bystanders.
insert
size
periphery
insert
centre
insert
insert screw
order number
Torx
size
Torx driver
order number
tightening
torque Nm
A TCF040204AP TCF040203AC 2025073 T5 2029221 0,40
B TCF050204BP TCF060203BC 1175225 T6 1138455 0,53
C TCF070306CP TCF070304CC 1021337 T7 2029266 0,90
D TCF080308DP TCF090305DC 1134385 T8 2029598 1,10
E TCF100408EP TCF120405EC 2018194 T9 1138430 2,00
F TCF120412FP TCF150406FC 1756815 T15 2029596 4,00
G TCF150512GP TCF180508GC 1099645 T20 2029488 6,30
H TCF180614HP TCF210608HC 1823871 T25 1022519 8,80
DLS
20,00 50
25,00 56
32,00 60
40,00 70
50,00 80
(Top Cut 4 Drill • Metric • 3 x D • SL Shanks — continued)
NOTE: Drilling in stacked plates possible in certain applications. Ask for technical support.
Drill shipped with insert screws and Torx wrench.
See pages V20–V23 for inserts.
SL = Side Lock
D1 max is an achievable diameter using x-offset.
Indexable Drills
Top Cut 4™ Shanks
Indexable Drills
WID_Master16_Holemaking_IndexableDrills_V012_V013_Metric_REBRAND.indd 13 10/29/15 1:26 PM
V14
LViWID M 16 H l ki I d bl D ill V014 V015 M i REBRANDO b 15 20154 53PM
widia.com
Indexable Drills
Top Cut 4™ Shanks
Top Cut 4 Drill • Metric • 4 x D • SL Shanks
(continued)
order number catalogue number D1 D1 max D L1 L4 max L5
insert
size
periphery
insert
centre
insert
5537869 TCF120R4SL20MA 12,00 12,50 20 78,6 48,0 0,41 A TCF040204AP TCF040203AC
5537870 TCF125R4SL20MA 12,50 13,00 20 80,8 50,0 0,48 A TCF040204AP TCF040203AC
5537871 TCF127R4SL20MA 12,70 13,20 20 81,6 50,8 0,51 A TCF040204AP TCF040203AC
5537872 TCF130R4SL20MA 13,00 13,50 20 82,9 52,0 0,56 A TCF040204AP TCF040203AC
5537873 TCF135R4SL20MA 13,50 14,00 20 85,1 54,0 0,64 A TCF040204AP TCF040203AC
5577938 TCF140R4SL25MB 14,00 14,50 25 87,8 56,0 0,42 B TCF050204BP TCF060203BC
5577939 TCF145R4SL25MB 14,50 15,00 25 89,9 58,0 0,45 B TCF050204BP TCF060203BC
5577940 TCF150R4SL25MB 15,00 15,50 25 92,1 60,0 0,49 B TCF050204BP TCF060203BC
5577941 TCF155R4SL25MB 15,50 16,00 25 94,3 62,0 0,54 B TCF050204BP TCF060203BC
5577942 TCF160R4SL25MB 16,00 16,50 25 96,4 64,0 0,60 B TCF050204BP TCF060203BC
5577943 TCF165R4SL25MB 16,50 17,00 25 98,6 66,0 0,68 B TCF050204BP TCF060203BC
5577944 TCF170R4SL25MB 17,00 17,50 25 102,4 68,0 0,74 B TCF050204BP TCF060203BC
5577945 TCF175R4SL25MB 17,50 18,00 25 104,6 70,0 0,79 B TCF050204BP TCF060203BC
5577946 TCF180R4SL25MB 18,00 18,50 25 106,8 72,0 0,86 B TCF050204BP TCF060203BC
5577947 TCF185R4SL25MB 18,50 19,00 25 108,9 74,0 0,83 B TCF050204BP TCF060203BC
5578836 TCF190R4SL25MC 19,00 19,50 25 110,1 76,0 0,60 C TCF070306CP TCF070304CC
5578837 TCF195R4SL25MC 19,50 20,00 25 112,2 78,0 0,70 C TCF070306CP TCF070304CC
5578838 TCF200R4SL25MC 20,00 20,50 25 114,4 80,0 0,70 C TCF070306CP TCF070304CC
5578839 TCF205R4SL25MC 20,50 21,00 25 116,6 82,0 0,70 C TCF070306CP TCF070304CC
5578840 TCF210R4SL25MC 21,00 21,50 25 118,7 84,0 0,80 C TCF070306CP TCF070304CC
5578841 TCF220R4SL25MC 22,00 22,50 25 123,0 88,0 1,00 C TCF070306CP TCF070304CC
5578842 TCF225R4SL25MC 22,50 23,00 25 125,2 90,0 1,10 C TCF070306CP TCF070304CC
5578843 TCF230R4SL25MC 23,00 23,50 25 127,4 92,0 1,10 C TCF070306CP TCF070304CC
5537831 TCF240R4SL25MD 24,00 25,00 25 135,2 96,0 0,78 D TCF080308DP TCF090305DC
5537832 TCF250R4SL32MD 25,00 26,00 32 139,6 100,0 0,86 D TCF080308DP TCF090305DC
5537833 TCF260R4SL32MD 26,00 27,00 32 143,9 104,0 0,97 D TCF080308DP TCF090305DC
5537834 TCF265R4SL32MD 26,50 27,50 32 146,0 106,0 1,05 D TCF080308DP TCF090305DC
5537835 TCF270R4SL32MD 27,00 28,00 32 148,2 108,0 1,15 D TCF080308DP TCF090305DC
5537836 TCF280R4SL32MD 28,00 29,00 32 152,5 112,0 1,30 D TCF080308DP TCF090305DC
5537837 TCF290R4SL32MD 29,00 30,00 32 156,8 116,0 1,45 D TCF080308DP TCF090305DC
5537951 TCF300R4SL32ME 30,00 31,00 32 160,2 120,0 0,63 E TCF100408EP TCF120405EC
5537952 TCF310R4SL32ME 31,00 32,00 32 164,5 124,0 0,72 E TCF100408EP TCF120405EC
Indexable Drills
For information on LS, see the table on page V16.
WID_Master16_Holemaking_IndexableDrills_V014_V015_Metric_REBRAND.indd 14 10/29/15 1:26 PM
V15
LViWID M 16 H l ki I d bl D ill V014 V015 M i REBRANDO b 1520154 53PM
widia.com
(Top Cut 4 Drill • Metric • 4 x D • SL Shanks — continued)
Indexable Drills
Top Cut 4™ Shanks
order number catalogue number D1 D1 max D L1 L4 max L5
insert
size
periphery
insert
centre
insert
5537953 TCF320R4SL32ME 32,00 33,00 32 168,8 128,0 0,82 E TCF100408EP TCF120405EC
5537954 TCF330R4SL40ME 33,00 34,00 40 173,1 132,0 0,95 E TCF100408EP TCF120405EC
5537955 TCF340R4SL40ME 34,00 35,00 40 177,4 136,0 1,14 E TCF100408EP TCF120405EC
5537956 TCF350R4SL40ME 35,00 36,00 40 181,8 140,0 1,30 E TCF100408EP TCF120405EC
5537957 TCF360R4SL40ME 36,00 37,00 40 186,1 144,0 1,45 E TCF100408EP TCF120405EC
5578619 TCF370R4SL40MF 37,00 38,00 40 192,1 148,0 1,19 F TCF120412FP TCF150406FC
5578620 TCF375R4SL40MF 37,50 38,50 40 194,3 150,0 1,23 F TCF120412FP TCF150406FC
5578621 TCF380R4SL40MF 38,00 39,00 40 196,5 152,0 1,27 F TCF120412FP TCF150406FC
5578622 TCF390R4SL40MF 39,00 40,00 40 200,8 156,0 1,36 F TCF120412FP TCF150406FC
5578623 TCF400R4SL40MF 40,00 41,00 40 205,1 160,0 1,47 F TCF120412FP TCF150406FC
5578624 TCF410R4SL40MF 41,00 42,00 40 209,4 164,0 1,60 F TCF120412FP TCF150406FC
5578625 TCF420R4SL40MF 42,00 43,00 40 213,7 168,0 1,77 F TCF120412FP TCF150406FC
5578626 TCF430R4SL40MF 43,00 44,00 40 218,1 172,0 1,99 F TCF120412FP TCF150406FC
5578627 TCF440R4SL40MF 44,00 45,00 40 222,4 176,0 2,10 F TCF120412FP TCF150406FC
5578628 TCF450R4SL50MF 45,00 46,00 50 226,7 180,0 2,21 F TCF120412FP TCF150406FC
5578729 TCF460R4SL50MG 46,00 47,00 50 231,0 184,0 1,45 G TCF150512GP TCF180508GC
5578730 TCF470R4SL50MG 47,00 48,00 50 235,3 188,0 1,53 G TCF150512GP TCF180508GC
5578731 TCF480R4SL50MG 48,00 49,00 50 239,7 192,0 1,63 G TCF150512GP TCF180508GC
5578732 TCF490R4SL50MG 49,00 50,00 50 244,0 196,0 1,74 G TCF150512GP TCF180508GC
5578733 TCF500R4SL50MG 50,00 51,00 50 249,8 200,0 1,87 G TCF150512GP TCF180508GC
5578734 TCF505R4SL50MG 50,50 51,50 50 252,0 202,0 1,94 G TCF150512GP TCF180508GC
5578735 TCF510R4SL50MG 51,00 52,00 50 254,1 204,0 2,02 G TCF150512GP TCF180508GC
5578736 TCF520R4SL50MG 52,00 53,00 50 258,4 208,0 2,22 G TCF150512GP TCF180508GC
5578737 TCF530R4SL50MG 53,00 54,00 50 262,8 212,0 2,46 G TCF150512GP TCF180508GC
5578738 TCF540R4SL50MG 54,00 55,00 50 267,1 216,0 2,53 G TCF150512GP TCF180508GC
5578739 TCF550R4SL50MG 55,00 56,00 50 271,4 220,0 2,73 G TCF150512GP TCF180508GC
5578750 TCF560R4SL50MG 56,00 57,00 50 275,7 224,0 2,37 G TCF150512GP TCF180508GC
5538647 TCF570R4SL50MH 57,00 58,00 50 279,5 228,0 1,76 H TCF180614HP TCF210608HC
5538648 TCF580R4SL50MH 58,00 59,00 50 283,9 232,0 1,85 H TCF180614HP TCF210608HC
5538649 TCF590R4SL50MH 59,00 60,00 50 288,2 236,0 1,96 H TCF180614HP TCF210608HC
5538650 TCF600R4SL50MH 60,00 61,00 50 292,5 240,0 1,42 H TCF180614HP TCF210608HC
5538651 TCF610R4SL50MH 61,00 62,00 50 296,8 244,0 2,23 H TCF180614HP TCF210608HC
5538652 TCF620R4SL50MH 62,00 63,00 50 301,1 248,0 2,41 H TCF180614HP TCF210608HC
5538653 TCF630R4SL50MH 63,00 64,00 50 305,5 252,0 2,64 H TCF180614HP TCF210608HC
5538654 TCF640R4SL50MH 64,00 65,00 50 309,8 256,0 2,94 H TCF180614HP TCF210608HC
5538655 TCF650R4SL50MH 65,00 66,00 50 314,1 260,0 3,06 H TCF180614HP TCF210608HC
5538656 TCF660R4SL50MH 66,00 67,00 50 318,4 264,0 3,18 H TCF180614HP TCF210608HC
5538657 TCF670R4SL50MH 67,00 68,00 50 322,7 268,0 3,30 H TCF180614HP TCF210608HC
5538658 TCF680R4SL50MH 68,00 69,00 50 327,1 272,0 2,93 H TCF180614HP TCF210608HC
(continued)
Indexable Drills
WID_Master16_Holemaking_IndexableDrills_V014_V015_Metric_REBRAND.indd 15 10/29/15 1:26 PM
V16
LViWID M 16 H l ki I d bl D ill V016 V017 M i REBRANDO b 16 20157 57AM
widia.com
WARNING
During through-hole operations, a slug or disc is produced
as the tool breaks through the workpiece. When the drill
is stationary and the workpiece is rotating, this slug may be
hurled from the chuck by centrifugal force. Provide adequate
shielding to protect bystanders.
Spare Parts
insert
size
periphery
insert
centre
insert
insert screw
order number
Torx
size
Torx driver
order number
tightening
torque Nm
A TCF040204AP TCF040203AC 2025073 T5 2029221 0,40
B TCF050204BP TCF060203BC 1175225 T6 1138455 0,53
C TCF070306CP TCF070304CC 1021337 T7 2029266 0,90
D TCF080308DP TCF090305DC 1134385 T8 2029598 1,10
E TCF100408EP TCF120405EC 2018194 T9 1138430 2,00
F TCF120412FP TCF150406FC 1756815 T15 2029596 4,00
G TCF150512GP TCF180508GC 1099645 T20 2029488 6,30
H TCF180614HP TCF210608HC 1823871 T25 1022519 8,80
DLS
20,00 50
25,00 56
32,00 60
40,00 70
50,00 80
(Top Cut 4 Drill • Metric • 4 x D • SL Shanks — continued)
NOTE: Drilling in stacked plates possible in certain applications. Ask for technical support.
Drill shipped with insert screws and Torx wrench.
See pages V20–V23 for inserts.
SL = Side Lock
D1 max is an achievable diameter using x-offset.
Indexable Drills
Top Cut 4™ Shanks
Indexable Drills
WID_Master16_Holemaking_IndexableDrills_V016_V017_Metric_REBRAND.indd 16 10/29/15 1:26 PM
V17
LViWID M 16 H l ki I d bl D ill V016 V017 M i REBRANDO b 1620157 57AM
widia.com
Indexable Drills
Top Cut 4™ Shanks
Top Cut 4 Drill • Metric • 5 x D • SL Shanks
(continued)
order number catalogue number D1 D L1 L4 max L5
insert
size
periphery
insert
centre
insert
5537874 TCF120R5SL20MA 12,00 20 86,0 60,0 0,41 A TCF040204AP TCF040203AC
5537875 TCF125R5SL20MA 12,50 20 89,0 63,0 0,48 A TCF040204AP TCF040203AC
5537876 TCF127R5SL20MA 12,70 20 90,0 63,5 0,51 A TCF040204AP TCF040203AC
5537877 TCF130R5SL20MA 13,00 20 90,0 65,0 0,56 A TCF040204AP TCF040203AC
5537878 TCF135R5SL20MA 13,50 20 94,0 68,0 0,64 A TCF040204AP TCF040203AC
5577948 TCF140R5SL25MB 14,00 25 99,0 70,0 0,42 B TCF050204BP TCF060203BC
5577949 TCF145R5SL25MB 14,50 25 100,0 72,5 0,45 B TCF050204BP TCF060203BC
5577950 TCF150R5SL25MB 15,00 25 103,0 75,0 0,49 B TCF050204BP TCF060203BC
5577951 TCF155R5SL25MB 15,50 25 104,8 77,5 0,54 B TCF050204BP TCF060203BC
5577952 TCF160R5SL25MB 16,00 25 108,4 80,0 0,60 B TCF050204BP TCF060203BC
5577953 TCF165R5SL25MB 16,50 25 111,1 82,5 0,68 B TCF050204BP TCF060203BC
5577954 TCF170R5SL25MB 17,00 25 115,4 85,0 0,74 B TCF050204BP TCF060203BC
5577955 TCF175R5SL25MB 17,50 25 118,1 87,5 0,79 B TCF050204BP TCF060203BC
5577956 TCF180R5SL25MB 18,00 25 120,8 90,0 0,86 B TCF050204BP TCF060203BC
5577957 TCF185R5SL25MB 18,50 25 122,4 92,5 0,83 B TCF050204BP TCF060203BC
5578844 TCF190R5SL25MC 19,00 25 129,1 95,0 0,60 C TCF070306CP TCF070304CC
5578845 TCF195R5SL25MC 19,50 25 131,7 97,5 0,70 C TCF070306CP TCF070304CC
5578846 TCF200R5SL25MC 20,00 25 132,0 100,0 0,70 C TCF070306CP TCF070304CC
5578847 TCF205R5SL25MC 20,50 25 134,1 102,5 0,70 C TCF070306CP TCF070304CC
5578848 TCF210R5SL25MC 21,00 25 137,0 105,0 0,80 C TCF070306CP TCF070304CC
5578849 TCF220R5SL25MC 22,00 25 142,0 110,0 1,00 C TCF070306CP TCF070304CC
5578850 TCF225R5SL25MC 22,50 25 144,7 112,5 1,10 C TCF070306CP TCF070304CC
5578851 TCF230R5SL25MC 23,00 25 147,0 115,0 1,10 C TCF070306CP TCF070304CC
5537838 TCF240R5SL25MD 24,00 25 152,0 120,0 0,78 D TCF080308DP TCF090305DC
5537839 TCF250R5SL32MD 25,00 32 158,0 125,0 0,86 D TCF080308DP TCF090305DC
5537840 TCF260R5SL32MD 26,00 32 164,0 130,0 0,97 D TCF080308DP TCF090305DC
5537841 TCF265R5SL32MD 26,50 32 166,5 132,5 1,05 D TCF080308DP TCF090305DC
5537842 TCF270R5SL32MD 27,00 32 170,0 135,0 1,15 D TCF080308DP TCF090305DC
5537843 TCF280R5SL32MD 28,00 32 176,5 140,0 1,30 D TCF080308DP TCF090305DC
5537844 TCF290R5SL32MD 29,00 32 181,0 145,0 1,45 D TCF080308DP TCF090305DC
5537958 TCF300R5SL32ME 30,00 32 186,0 150,0 0,63 E TCF100408EP TCF120405EC
5537959 TCF310R5SL32ME 31,00 32 193,0 155,0 0,72 E TCF100408EP TCF120405EC
Indexable Drills
For information on LS, see the table on page V19.
WID_Master16_Holemaking_IndexableDrills_V016_V017_Metric_REBRAND.indd 17 10/29/15 1:26 PM
V18
LViWID M 16 H l ki I d bl D ill V018 V019 M i REBRANDO b 16 20157 58AM
widia.com
(Top Cut 4 Drill • Metric • 5 x D • SL Shanks — continued)
(continued)
Indexable Drills
Top Cut 4™ Shanks
order number catalogue number D1 D L1 L4 max L5
insert
size
periphery
insert
centre
insert
5537960 TCF320R5SL32ME 32,00 32 199,0 160,0 0,82 E TCF100408EP TCF120405EC
5537961 TCF330R5SL40ME 33,00 40 204,0 165,0 0,95 E TCF100408EP TCF120405EC
5537962 TCF340R5SL40ME 34,00 40 210,0 170,0 1,14 E TCF100408EP TCF120405EC
5537963 TCF350R5SL40ME 35,00 40 216,8 175,0 1,30 E TCF100408EP TCF120405EC
5537964 TCF360R5SL40ME 36,00 40 222,0 180,0 1,45 E TCF100408EP TCF120405EC
5578629 TCF370R5SL40MF 37,00 40 228,0 185,0 1,19 F TCF120412FP TCF150406FC
5578640 TCF375R5SL40MF 37,50 40 231,8 188,0 1,23 F TCF120412FP TCF150406FC
5578641 TCF380R5SL40MF 38,00 40 234,5 190,0 1,27 F TCF120412FP TCF150406FC
5578642 TCF390R5SL40MF 39,00 40 239,8 195,0 1,36 F TCF120412FP TCF150406FC
5578643 TCF400R5SL40MF 40,00 40 245,1 200,0 1,47 F TCF120412FP TCF150406FC
5578644 TCF410R5SL40MF 41,00 40 250,4 205,0 1,60 F TCF120412FP TCF150406FC
5578645 TCF420R5SL40MF 42,00 40 255,7 210,0 1,77 F TCF120412FP TCF150406FC
5578646 TCF430R5SL40MF 43,00 40 261,1 215,0 1,99 F TCF120412FP TCF150406FC
5578647 TCF440R5SL40MF 44,00 40 266,4 220,0 2,10 F TCF120412FP TCF150406FC
5578648 TCF450R5SL50MF 45,00 50 271,7 225,0 2,21 F TCF120412FP TCF150406FC
5578751 TCF460R5SL50MG 46,00 50 277,0 230,0 1,45 G TCF150512GP TCF180508GC
5578752 TCF470R5SL50MG 47,00 50 282,3 235,0 1,53 G TCF150512GP TCF180508GC
5578753 TCF480R5SL50MG 48,00 50 287,7 240,0 1,63 G TCF150512GP TCF180508GC
5578754 TCF490R5SL50MG 49,00 50 293,0 245,0 1,74 G TCF150512GP TCF180508GC
5578755 TCF500R5SL50MG 50,00 50 299,8 250,0 1,87 G TCF150512GP TCF180508GC
5578756 TCF505R5SL50MG 50,50 50 302,5 253,0 1,94 G TCF150512GP TCF180508GC
5578757 TCF510R5SL50MG 51,00 50 305,1 255,0 2,02 G TCF150512GP TCF180508GC
5578758 TCF520R5SL50MG 52,00 50 310,4 260,0 2,22 G TCF150512GP TCF180508GC
5578759 TCF530R5SL50MG 53,00 50 315,8 265,0 2,46 G TCF150512GP TCF180508GC
5578760 TCF540R5SL50MG 54,00 50 321,1 270,0 2,53 G TCF150512GP TCF180508GC
5578761 TCF550R5SL50MG 55,00 50 326,4 275,0 2,73 G TCF150512GP TCF180508GC
5578762 TCF560R5SL50MG 56,00 50 331,7 280,0 2,37 G TCF150512GP TCF180508GC
5538659 TCF570R5SL50MH 57,00 50 330,0 285,0 1,76 H TCF180614HP TCF210608HC
5538680 TCF580R5SL50MH 58,00 50 336,0 290,0 1,85 H TCF180614HP TCF210608HC
5538681 TCF590R5SL50MH 59,00 50 339,2 295,0 1,96 H TCF180614HP TCF210608HC
5538682 TCF600R5SL50MH 60,00 50 345,5 300,0 1,42 H TCF180614HP TCF210608HC
5538683 TCF610R5SL50MH 61,00 50 347,8 305,0 2,23 H TCF180614HP TCF210608HC
5538684 TCF620R5SL50MH 62,00 50 358,0 310,0 2,41 H TCF180614HP TCF210608HC
5538685 TCF630R5SL50MH 63,00 50 365,0 315,0 2,64 H TCF180614HP TCF210608HC
5538686 TCF640R5SL50MH 64,00 50 363,8 320,0 2,94 H TCF180614HP TCF210608HC
5538687 TCF650R5SL50MH 65,00 50 375,0 325,0 3,06 H TCF180614HP TCF210608HC
5538688 TCF660R5SL50MH 66,00 50 376,4 330,0 3,18 H TCF180614HP TCF210608HC
5538689 TCF670R5SL50MH 67,00 50 385,0 335,0 3,30 H TCF180614HP TCF210608HC
5538700 TCF680R5SL50MH 68,00 50 390,0 340,0 2,93 H TCF180614HP TCF210608HC
Indexable Drills
WID_Master16_Holemaking_IndexableDrills_V018_V019_Metric_REBRAND.indd 18 11/20/15 3:08 PM
V19
LViWID M 16 H l ki I d bl D ill V018 V019 M i REBRANDO b 1620157 58AM
widia.com
DLS
20,00 50
25,00 56
32,00 60
40,00 70
50,00 80
Spare Parts
insert
size
periphery
insert
centre
insert
insert screw
order number
Torx
size
Torx driver
order number
tightening
torque Nm
A TCF040204AP TCF040203AC 2025073 T5 2029221 0,40
B TCF050204BP TCF060203BC 1175225 T6 1138455 0,53
C TCF070306CP TCF070304CC 1021337 T7 2029266 0,90
D TCF080308DP TCF090305DC 1134385 T8 2029598 1,10
E TCF100408EP TCF120405EC 2018194 T9 1138430 2,00
F TCF120412FP TCF150406FC 1756815 T15 2029596 4,00
G TCF150512GP TCF180508GC 1099645 T20 2029488 6,30
H TCF180614HP TCF210608HC 1823871 T25 1022519 8,80
WARNING
During through-hole operations, a slug or disc is produced
as the tool breaks through the workpiece. When the drill
is stationary and the workpiece is rotating, this slug may be
hurled from the chuck by centrifugal force. Provide adequate
shielding to protect bystanders.
(Top Cut 4 Drill • Metric • 5 x D • SL Shanks — continued)
Indexable Drills
Top Cut 4™ Shanks
NOTE: Drill shipped with insert screws and Torx wrench.
See pages V20–V23 for inserts.
SL = Side Lock
Indexable Drills
WID_Master16_Holemaking_IndexableDrills_V018_V019_Metric_REBRAND.indd 19 11/20/15 3:08 PM
V20
LViWID M 16 H l ki I d bl D ill V020 V021 M i REBRANDO b 16 20157 59AM
widia.com
Indexable Drills
Top Cut 4 Drill • Centre Inserts • V34
catalogue number D D1 W S RR
insert
size
WPK10CH
WU25CH
WU40PH
TCF040203ACV34 4,47 2,10 3,65 2,00 0,300 A
–
5541817
5541818
TCF060203BCV34 6,00 2,40 4,90 2,40 0,300 B
–
5542602
5542604
TCF070304CCV34 7,59 2,60 6,20 2,80 0,400 C
–
5542642
5542643
TCF090305DCV34 9,55 2,80 7,80 3,00 0,500 D
–
5538554
5538555
TCF120405ECV34 12,00 3,40 9,80 3,60 0,500 E
–
5538603
5538604
TCF150406FCV34 14,94 4,80 12,20 4,20 0,600 F
–
5542623
5542624
TCF180508GCV34 17,88 6,00 14,60 5,40 0,800 G
–
5542475
5542476
TCF210608HCV34 21,68 7,50 17,70 6,50 0,800 H
–
5542002
5542003
rst choice
alternate choice
Top Cut 4™ Inserts
P
M
K
N
S
H
Indexable Drills
NOTE: For application-specific insert selection, please refer to the application data on pages V24–V35.
Geometry Application
V34
First choice for machining steel, cast iron,
and short chipping materials.
Suitable for severe cutting conditions.
V36
First choice for stainless steel.
Suitable for long chipping steel and where
low power consumption is required.
WID_Master16_Holemaking_IndexableDrills_V020_V021_Metric_REBRAND.indd 20 10/29/15 1:26 PM
V21
LViWID M 16 H l ki I d bl D ill V020 V021 M i REBRANDO b 1620157 59AM
widia.com
Indexable Drills
Top Cut 4 Drill • Centre Inserts • V36
catalogue number D D1 W S RR
insert
size
WPK10CH
WU25CH
WU40PH
TCF040203ACV36 4,47 2,10 3,65 2,00 0,300 A
–
5541819
5541840
TCF060203BCV36 6,00 2,40 4,90 2,40 0,300 B
–
5542606
5542607
TCF070304CCV36 7,59 2,60 6,20 2,80 0,400 C
–
5542644
5542645
TCF090305DCV36 9,55 2,80 7,80 3,00 0,500 D
–
5538556
5538557
TCF120405ECV36 12,00 3,40 9,80 3,60 0,500 E
–
5538606
5538607
TCF150406FCV36 14,94 4,80 12,20 4,20 0,600 F
–
5542625
5542626
TCF180508GCV36 17,88 6,00 14,60 5,40 0,800 G
–
5542477
5542478
TCF210608HCV36 21,68 7,50 17,70 6,50 0,800 H
–
5542004
5542005
rst choice
alternate choice
Top Cut 4™ Inserts
P
M
K
N
S
H
Indexable Drills
NOTE: For application-specific insert selection, please refer to the application data on pages V24–V35.
Geometry Application
V34
First choice for machining steel, cast iron,
and short chipping materials.
Suitable for severe cutting conditions.
V36
First choice for stainless steel.
Suitable for long chipping steel and where
low power consumption is required.
WID_Master16_Holemaking_IndexableDrills_V020_V021_Metric_REBRAND.indd 21 10/29/15 1:26 PM
V22
LViWID M 16 H l ki I d bl D ill V022 V023 M i REBRANDO b 16 20158 00AM
widia.com
Indexable Drills
Top Cut 4 Drill • Periphery Inserts • V34
catalogue number D D1 W S RR
insert
size
WPK10CH
WU25CH
WU40PH
TCF040204APV34 4,14 2,10 4,40 2,00 0,400 A
5541843
5541841
5541842
TCF050204BPV34 5,07 2,40 5,40 2,40 0,400 B
5542620
5542608
5542609
TCF070306CPV34 6,67 2,60 7,10 2,80 0,600 C
5542648
5542646
5542647
TCF080308DPV34 8,08 2,80 8,60 3,00 0,800 D
5538600
5538558
5538559
TCF100408EPV34 9,96 3,40 10,60 3,60 0,800 E
5538610
5538608
5538609
TCF120412FPV34 12,59 4,80 13,40 4,20 1,200 F
5542629
5542627
5542628
TCF150512GPV34 15,13 6,00 16,10 5,40 1,200 G
5542601
5542479
5542600
TCF180614HPV34 18,04 7,50 19,20 6,50 1,400 H
5542008
5542006
5542007
rst choice
alternate choice
Top Cut 4™ Inserts
P
M
K
N
S
H
Indexable Drills
NOTE: For application-specific insert selection, please refer to the application data on pages V24–V35.
Geometry Application
V34
First choice for machining steel, cast iron,
and short chipping materials.
Suitable for severe cutting conditions.
V36
First choice for stainless steel.
Suitable for long chipping steel and where
low power consumption is required.
WID_Master16_Holemaking_IndexableDrills_V022_V023_Metric_REBRAND.indd 22 10/29/15 1:26 PM
V23
LViWID M 16 H l ki I d bl D ill V022 V023 M i REBRANDO b 1620158 00AM
widia.com
Indexable Drills
Top Cut 4 Drill • Periphery Inserts • V36
catalogue number D D1 W S RR
insert
size
WPK10CH
WU25CH
WU40PH
TCF040204APV36 4,14 2,10 4,40 2,00 0,400 A
–
5541844
5541845
TCF050204BPV36 5,07 2,40 5,40 2,40 0,400 B
–
5542621
5542622
TCF070306CPV36 6,67 2,60 7,10 2,80 0,600 C
–
5542649
5542650
TCF080308DPV36 8,08 2,80 8,60 3,00 0,800 D
–
5538601
5538602
TCF100408EPV36 9,96 3,40 10,60 3,60 0,800 E
–
5538611
5538612
TCF120412FPV36 12,59 4,80 13,40 4,20 1,200 F
–
5542640
5542641
TCF150512GPV36 15,13 6,00 16,10 5,40 1,200 G
–
5542603
5542605
TCF180614HPV36 18,04 7,50 19,20 6,50 1,400 H
–
5542009
5542020
rst choice
alternate choice
Top Cut 4™ Inserts
P
M
K
N
S
H
Indexable Drills
NOTE: For application-specific insert selection, please refer to the application data on pages V24–V35.
Geometry Application
V34
First choice for machining steel, cast iron,
and short chipping materials.
Suitable for severe cutting conditions.
V36
First choice for stainless steel.
Suitable for long chipping steel and where
low power consumption is required.
WID_Master16_Holemaking_IndexableDrills_V022_V023_Metric_REBRAND.indd 23 10/29/15 1:26 PM
V24
LViWID M 16 H l ki I d bl D ill V024 V025 M i REBRANDN b 10 20153 27PM
widia.com
Top Cut 4 • Steel • 2 x D/3 x D • Feed Chart • Metric
Top Cut 4
Recommended Feed Rate by Diameter (mm/r)
Insert Size A Insert Size B Insert Size C Insert Size D
TCF040203AC
TCF040204AP
12,00–13,99mm
TCF060203BC
TCF050204BP
14,00–18,99mm
TCF070304CC
TCF070306CP
19,00–23,99mm
TCF090305DC
TCF080308DP
24,00–29,99mm
Material
Group Condition
Pocket
Seat Geometry Grade min Start max min Start max min Start max min Start max
P
1
SP V36 WU25CH 0,06 0,08 0,10 0,08 0,10 0,13 0,10 0,12 0,15 0,11 0,13 0,16
C V36 WU40PH
UP V36 WU40PH 0,06 0,08 0,10 0,08 0,10 0,13 0,10 0,12 0,15 0,11 0,13 0,16
C V36 WU40PH
IP V36 WU40PH 0,06 0,08 0,10 0,08 0,10 0,13 0,10 0,12 0,15 0,11 0,13 0,16
C V36 WU40PH
2
SP V34 WPK10CH 0,06 0,08 0,10 0,08 0,12 0,15 0,10 0,13 0,16 0,11 0,14 0,17
C V34 WU40PH
UP V34 WU25CH 0,06 0,08 0,10 0,08 0,12 0,15 0,10 0,13 0,16 0,11 0,14 0,17
C V34 WU40PH
IP V34 WU40PH 0,06 0,08 0,10 0,08 0,12 0,15 0,10 0,13 0,16 0,11 0,14 0,17
C V34 WU40PH
3
SP V34 WPK10CH 0,08 0,11 0,15 0,10 0,12 0,16 0,11 0,14 0,18 0,12 0,15 0,20
C V34 WU40PH
UP V34 WU25CH 0,08 0,11 0,14 0,10 0,12 0,15 0,11 0,14 0,16 0,12 0,15 0,18
C V34 WU40PH
IP V34 WU40PH 0,08 0,11 0,14 0,10 0,12 0,15 0,11 0,14 0,16 0,12 0,15 0,18
C V34 WU40PH
4
SP V34 WPK10CH 0,08 0,11 0,15 0,10 0,12 0,16 0,11 0,14 0,18 0,12 0,15 0,20
C V34 WU40PH
UP V34 WU25CH 0,08 0,11 0,14 0,10 0,12 0,15 0,11 0,14 0,16 0,12 0,15 0,18
C V34 WU40PH
IP V34 WU40PH 0,08 0,11 0,14 0,10 0,12 0,15 0,11 0,14 0,16 0,12 0,15 0,18
C V34 WU40PH
5
SP V36 WU25CH 0,06 0,08 0,10 0,08 0,10 0,14 0,10 0,12 0,15 0,11 0,13 0,16
C V36 WU40PH
UP V36 WU40PH 0,06 0,08 0,10 0,08 0,10 0,14 0,10 0,12 0,15 0,11 0,13 0,16
C V36 WU40PH
IP V36 WU40PH 0,06 0,08 0,10 0,08 0,10 0,14 0,10 0,12 0,15 0,11 0,13 0,16
C V36 WU40PH
6
SP V36 WU25CH 0,06 0,08 0,10 0,08 0,10 0,14 0,10 0,12 0,15 0,11 0,13 0,16
C V36 WU40PH
UP V36 WU40PH 0,06 0,08 0,10 0,08 0,10 0,14 0,10 0,12 0,15 0,11 0,13 0,16
C V36 WU40PH
IP V36 WU40PH 0,06 0,08 0,10 0,08 0,10 0,14 0,10 0,12 0,15 0,11 0,13 0,16
C V36 WU40PH
Indexable Drills
Application Data • Top Cut 4™
Indexable Drills
NOTE: For 4 x D, it is highly recommended to start with feed and speed values reduced by 10% less than above recommendations.
For 5 x D, diameter range 12–23,99mm (insert sizes A to C), it is highly recommended to start with feed and speed values reduced by 20% less than
above recommendations.
For 5 x D, diameter range 24–68mm (insert sizes D to H), it is highly recommended to start with feed and speed values reduced by 15% less than
above recommendations.
For 4 x D and 5 x D, it is recommended to reduce the feed rate during entry and exit by 30–50%.
Condition: S = stable conditions,
U = unstable cutting conditions,
I = interrupted cutting conditions
Pocket Seat: P = periphery insert,
C = centre insert
WID_Master16_Holemaking_IndexableDrills_V024_V025_Metric_REBRAND.indd 24 11/10/15 5:01 PM
V25
LViWID M 16 H l ki I d bl D ill V024 V025 M i REBRANDN b 1020153 27PM
widia.com
Top Cut 4 • Steel • 2 x D/3 x D • Speed Chart • Metric
Top Cut 4
Recommended Cutting Speed by Diameter (m/min)
Insert Size A Insert Size B Insert Size C Insert Size D
TCF040203AC
TCF040204AP
12,00–13,99mm
TCF060203BC
TCF050204BP
14,00–18,99mm
TCF070304CC
TCF070306CP
19,00–23,99mm
TCF090305DC
TCF080308DP
24,00–29,99mm
Material
Group Condition
Pocket
Seat Geometry Grade min Start max min Start max min Start max min Start max
P
1
SP V36 WU25CH 120 140 160 140 160 240 150 180 260 160 180 260
C V36 WU40PH
UP V36 WU40PH 110 120 140 130 150 220 130 170 250 140 170 250
C V36 WU40PH
IP V36 WU40PH 90 100 120 130 150 210 130 170 240 140 170 240
C V36 WU40PH
2
SP V34 WPK10CH 120 140 160 140 170 260 150 190 280 160 190 280
C V34 WU40PH
UP V34 WU25CH 110 120 140 130 170 240 140 180 260 150 180 260
C V34 WU40PH
IP V34 WU40PH 90 100 120 130 170 230 130 170 240 140 170 240
C V34 WU40PH
3
SP V34 WPK10CH 120 140 180 140 170 270 150 200 290 160 200 310
C V34 WU40PH
UP V34 WU25CH 110 120 160 130 160 260 140 200 280 150 200 280
C V34 WU40PH
IP V34 WU40PH 100 110 140 120 150 250 130 180 260 140 180 260
C V34 WU40PH
4
SP V34 WPK10CH 120 140 180 140 170 270 150 200 290 160 200 310
C V34 WU40PH
UP V34 WU25CH 110 120 160 130 160 260 140 200 280 150 200 280
C V34 WU40PH
IP V34 WU40PH 100 110 140 120 150 250 130 180 260 140 180 260
C V34 WU40PH
5
SP V36 WU25CH 120 140 160 140 170 240 150 180 250 160 180 250
C V36 WU40PH
UP V36 WU40PH 110 120 140 130 160 230 140 170 240 150 170 240
C V36 WU40PH
IP V36 WU40PH 90 100 120 130 160 230 130 160 220 140 160 220
C V36 WU40PH
6
SP V36 WU25CH 120 140 160 140 170 200 140 170 210 150 170 210
C V36 WU40PH
UP V36 WU40PH 110 120 140 120 150 190 130 160 200 140 160 200
C V36 WU40PH
IP V36 WU40PH 90 100 120 110 130 180 120 140 190 120 140 190
C V36 WU40PH
Indexable Drills
Application Data • Top Cut 4™
Indexable Drills
NOTE: For 4 x D, it is highly recommended to start with feed and speed values reduced by 10% less than above recommendations.
For 5 x D, diameter range 12–23,99mm (insert sizes A to C), it is highly recommended to start with feed and speed values reduced by 20% less than
above recommendations.
For 5 x D, diameter range 24–68mm (insert sizes D to H), it is highly recommended to start with feed and speed values reduced by 15% less than
above recommendations.
For 4 x D and 5 x D, it is recommended to reduce the feed rate during entry and exit by 30–50%.
Condition: S = stable conditions,
U = unstable cutting conditions,
I = interrupted cutting conditions
Pocket Seat: P = periphery insert,
C = centre insert
WID_Master16_Holemaking_IndexableDrills_V024_V025_Metric_REBRAND.indd 25 11/10/15 5:01 PM
V26
LViWID M 16 H l ki I d bl D ill V026 V027 M i REBRANDN b 10 20153 28PM
widia.com
Top Cut 4 • Steel • 2 x D/3 x D • Feed Chart • Metric
Top Cut 4
Recommended Feed Rate by Diameter (mm/r)
Insert Size E Insert Size F Insert Size G Insert Size H
TCF120405EC
TCF100408EP
30,00–36,99mm
TCF150406FC
TCF120412FP
37,00–45,99mm
TCF180508GC
TCF150512GP
46,00–56,99mm
TCF210608HC
TCF180614HP
57,00–68,00mm
Material
Group Condition
Pocket
Seat Geometry Grade min Start max min Start max min Start max min Start max
P
1
SP V36 WU25CH 0,13 0,14 0,18 0,15 0,17 0,20 0,16 0,23 0,27 0,17 0,24 0,29
C V36 WU40PH
UP V36 WU40PH 0,06 0,08 0,10 0,08 0,10 0,13 0,10 0,12 0,15 0,11 0,13 0,16
C V36 WU40PH
IP V36 WU40PH 0,06 0,08 0,10 0,08 0,10 0,13 0,10 0,12 0,15 0,11 0,13 0,16
C V36 WU40PH
2
SP V34 WPK10CH 0,06 0,08 0,10 0,08 0,12 0,15 0,10 0,13 0,16 0,11 0,14 0,17
C V34 WU40PH
UP V34 WU25CH 0,06 0,08 0,10 0,08 0,12 0,15 0,10 0,13 0,16 0,11 0,14 0,17
C V34 WU40PH
IP V34 WU40PH 0,06 0,08 0,10 0,08 0,12 0,15 0,10 0,13 0,16 0,11 0,14 0,17
C V34 WU40PH
3
SP V34 WPK10CH 0,08 0,11 0,15 0,10 0,12 0,16 0,11 0,14 0,18 0,12 0,15 0,20
C V34 WU40PH
UP V34 WU25CH 0,08 0,11 0,14 0,10 0,12 0,15 0,11 0,14 0,16 0,12 0,15 0,18
C V34 WU40PH
IP V34 WU40PH 0,08 0,11 0,14 0,10 0,12 0,15 0,11 0,14 0,16 0,12 0,15 0,18
C V34 WU40PH
4
SP V34 WPK10CH 0,08 0,11 0,15 0,10 0,12 0,16 0,11 0,14 0,18 0,12 0,15 0,20
C V34 WU40PH
UP V34 WU25CH 0,08 0,11 0,14 0,10 0,12 0,15 0,11 0,14 0,16 0,12 0,15 0,18
C V34 WU40PH
IP V34 WU40PH 0,08 0,11 0,14 0,10 0,12 0,15 0,11 0,14 0,16 0,12 0,15 0,18
C V34 WU40PH
5
SP V36 WU25CH 0,06 0,08 0,10 0,08 0,10 0,14 0,10 0,12 0,15 0,11 0,13 0,16
C V36 WU40PH
UP V36 WU40PH 0,06 0,08 0,10 0,08 0,10 0,14 0,10 0,12 0,15 0,11 0,13 0,16
C V36 WU40PH
IP V36 WU40PH 0,06 0,08 0,10 0,08 0,10 0,14 0,10 0,12 0,15 0,11 0,13 0,16
C V36 WU40PH
6
SP V36 WU25CH 0,06 0,08 0,10 0,08 0,10 0,14 0,10 0,12 0,15 0,11 0,13 0,16
C V36 WU40PH
UP V36 WU40PH 0,06 0,08 0,10 0,08 0,10 0,14 0,10 0,12 0,15 0,11 0,13 0,16
C V36 WU40PH
IP V36 WU40PH 0,06 0,08 0,10 0,08 0,10 0,14 0,10 0,12 0,15 0,11 0,13 0,16
C V36 WU40PH
Indexable Drills
Indexable Drills
Application Data • Top Cut 4™
NOTE: For 4 x D, it is highly recommended to start with feed and speed values reduced by 10% less than above recommendations.
For 5 x D, diameter range 12–23,99mm (insert sizes A to C), it is highly recommended to start with feed and speed values reduced by 20% less than
above recommendations.
For 5 x D, diameter range 24–68mm (insert sizes D to H), it is highly recommended to start with feed and speed values reduced by 15% less than
above recommendations.
For 4 x D and 5 x D, it is recommended to reduce the feed rate during entry and exit by 30–50%.
Condition: S = stable conditions,
U = unstable cutting conditions,
I = interrupted cutting conditions
Pocket Seat: P = periphery insert,
C = centre insert
WID_Master16_Holemaking_IndexableDrills_V026_V027_Metric_REBRAND.indd 26 11/10/15 5:01 PM
V27
LViWID M 16 H l ki I d bl D ill V026 V027 M i REBRANDN b 1020153 28PM
widia.com
Top Cut 4 • Steel • 2 x D/3 x D • Speed Chart • Metric
Top Cut 4
Recommended Cutting Speed by Diameter (m/min)
Insert Size E Insert Size F Insert Size G Insert Size H
TCF120405EC
TCF100408EP
30,00–36,99mm
TCF150406FC
TCF120412FP
37,00–45,99mm
TCF180508GC
TCF150512GP
46,00–56,99mm
TCF210608HC
TCF180614HP
57,00–68,00mm
Material
Group Condition
Pocket
Seat Geometry Grade min Start max min Start max min Start max min Start max
P
1
SP V36 WU25CH 160 180 260 160 180 260 160 180 260 160 180 260
C V36 WU40PH
UP V36 WU40PH 140 170 250 140 170 250 140 170 250 140 170 250
C V36 WU40PH
IP V36 WU40PH 140 170 240 140 170 240 140 170 240 140 170 240
C V36 WU40PH
2
SP V34 WPK10CH 160 190 280 160 190 280 160 190 280 160 190 280
C V34 WU40PH
UP V34 WU25CH 150 180 260 150 180 260 150 180 260 150 180 260
C V34 WU40PH
IP V34 WU40PH 140 170 240 140 170 240 140 170 240 140 170 240
C V34 WU40PH
3
SP V34 WPK10CH 160 200 310 160 200 310 160 200 310 160 200 310
C V34 WU40PH
UP V34 WU25CH 150 200 280 150 200 280 150 200 280 150 200 280
C V34 WU40PH
IP V34 WU40PH 140 180 260 140 180 260 140 180 260 140 180 260
C V34 WU40PH
4
SP V34 WPK10CH 160 200 310 160 200 310 160 200 310 160 200 310
C V34 WU40PH
UP V34 WU25CH 150 200 280 150 200 280 150 200 280 150 200 280
C V34 WU40PH
IP V34 WU40PH 140 180 260 140 180 260 140 180 260 140 180 260
C V34 WU40PH
5
SP V36 WU25CH 160 180 250 160 180 250 160 180 250 160 180 250
C V36 WU40PH
UP V36 WU40PH 150 170 240 150 170 240 150 170 240 150 170 240
C V36 WU40PH
IP V36 WU40PH 140 160 220 140 160 220 140 160 220 140 160 220
C V36 WU40PH
6
SP V36 WU25CH 150 170 210 150 170 210 150 170 210 150 170 210
C V36 WU40PH
UP V36 WU40PH 140 160 200 140 160 200 140 160 200 140 160 200
C V36 WU40PH
IP V36 WU40PH 120 140 190 120 140 190 120 140 190 120 140 190
C V36 WU40PH
Indexable Drills
Indexable Drills
Application Data • Top Cut 4™
NOTE: For 4 x D, it is highly recommended to start with feed and speed values reduced by 10% less than above recommendations.
For 5 x D, diameter range 12–23,99mm (insert sizes A to C), it is highly recommended to start with feed and speed values reduced by 20% less than
above recommendations.
For 5 x D, diameter range 24–68mm (insert sizes D to H), it is highly recommended to start with feed and speed values reduced by 15% less than
above recommendations.
For 4 x D and 5 x D, it is recommended to reduce the feed rate during entry and exit by 30–50%.
Condition: S = stable conditions,
U = unstable cutting conditions,
I = interrupted cutting conditions
Pocket Seat: P = periphery insert,
C = centre insert
WID_Master16_Holemaking_IndexableDrills_V026_V027_Metric_REBRAND.indd 27 11/10/15 5:01 PM
V28
LViWID M 16 H l ki I d bl D ill V028 V029 M i REBRANDN b 10 20153 29PM
widia.com
Top Cut 4 • Stainless Steel • 2 x D/3 x D • Feed Chart • Metric
Top Cut 4
Recommended Feed Rate by Diameter (mm/r)
Insert Size A Insert Size B Insert Size C Insert Size D
TCF040203AC
TCF040204AP
12,00–13,99mm
TCF060203BC
TCF050204BP
14,00–18,99mm
TCF070304CC
TCF070306CP
19,00–23,99mm
TCF090305DC
TCF080308DP
24,00–29,99mm
Material
Group Condition
Pocket
Seat Geometry Grade min Start max min Start max min Start max min Start max
M
1
SP V36 WU40PH 0,06 0,08 0,12 0,07 0,10 0,13 0,08 0,10 0,15 0,10 0,12 0,16
C V36 WU40PH
UP V36 WU40PH 0,06 0,08 0,12 0,07 0,10 0,12 0,08 0,10 0,14 0,10 0,12 0,15
C V36 WU40PH
IP V36 WU40PH 0,06 0,08 0,11 0,07 0,10 0,11 0,08 0,10 0,14 0,10 0,12 0,15
C V36 WU40PH
2
SP V36 WU40PH 0,06 0,08 0,12 0,07 0,10 0,13 0,08 0,10 0,15 0,10 0,12 0,16
C V36 WU40PH
UP V36 WU40PH 0,06 0,08 0,12 0,07 0,10 0,12 0,08 0,10 0,14 0,10 0,12 0,15
C V36 WU40PH
IP V36 WU40PH 0,06 0,08 0,11 0,07 0,10 0,11 0,08 0,10 0,14 0,10 0,12 0,15
C V36 WU40PH
3
SP V36 WU40PH 0,06 0,08 0,12 0,07 0,10 0,13 0,08 0,10 0,15 0,10 0,12 0,16
C V36 WU40PH
UP V36 WU40PH 0,06 0,08 0,12 0,07 0,10 0,12 0,08 0,10 0,14 0,10 0,12 0,15
C V36 WU40PH
IP V36 WU40PH 0,06 0,08 0,11 0,07 0,10 0,11 0,08 0,10 0,14 0,10 0,12 0,15
C V36 WU40PH
Indexable Drills
Indexable Drills
Application Data • Top Cut 4™
NOTE: For 4 x D, it is highly recommended to start with feed and speed values reduced by 10% less than above recommendations.
For 5 x D, diameter range 12–23,99mm (insert sizes A to C), it is highly recommended to start with feed and speed values reduced by 20% less than
above recommendations.
For 5 x D, diameter range 24–68mm (insert sizes D to H), it is highly recommended to start with feed and speed values reduced by 15% less than
above recommendations.
For 4 x D and 5 x D, it is recommended to reduce the feed rate during entry and exit by 30–50%.
Condition: S = stable conditions,
U = unstable cutting conditions,
I = interrupted cutting conditions
Pocket Seat: P = periphery insert,
C = centre insert
WID_Master16_Holemaking_IndexableDrills_V028_V029_Metric_REBRAND.indd 28 11/10/15 5:01 PM
V29
LViWID M 16 H l ki I d bl D ill V028 V029 M i REBRANDN b 1020153 29PM
widia.com
Top Cut 4 • Stainless Steel • 2 x D/3 x D • Speed Chart • Metric
Top Cut 4
Recommended Cutting Speed by Diameter (m/min)
Insert Size A Insert Size B Insert Size C Insert Size D
TCF040203AC
TCF040204AP
12,00–13,99mm
TCF060203BC
TCF050204BP
14,00–18,99mm
TCF070304CC
TCF070306CP
19,00–23,99mm
TCF090305DC
TCF080308DP
24,00–29,99mm
Material
Group Condition
Pocket
Seat Geometry Grade min Start max min Start max min Start max min Start max
M
1
SP V36 WU40PH 120 140 160 140 160 230 150 170 240 150 170 240
C V36 WU40PH
UP V36 WU40PH 110 120 140 130 150 210 130 160 210 130 160 210
C V36 WU40PH
IP V36 WU40PH 90 100 120 130 150 200 130 160 200 130 160 200
C V36 WU40PH
2
SP V36 WU40PH 120 140 160 140 160 200 150 170 210 150 170 210
C V36 WU40PH
UP V36 WU40PH 110 120 140 130 150 180 130 160 200 130 160 200
C V36 WU40PH
IP V36 WU40PH 90 100 120 120 140 170 130 150 180 130 150 180
C V36 WU40PH
3
SP V36 WU40PH 110 120 140 130 150 180 140 160 200 140 160 200
C V36 WU40PH
UP V36 WU40PH 90 110 120 120 130 160 130 140 180 130 140 180
C V36 WU40PH
IP V36 WU40PH 80 100 110 100 120 150 110 130 160 110 130 160
C V36 WU40PH
Indexable Drills
Indexable Drills
Application Data • Top Cut 4™
NOTE: For 4 x D, it is highly recommended to start with feed and speed values reduced by 10% less than above recommendations.
For 5 x D, diameter range 12–23,99mm (insert sizes A to C), it is highly recommended to start with feed and speed values reduced by 20% less than
above recommendations.
For 5 x D, diameter range 24–68mm (insert sizes D to H), it is highly recommended to start with feed and speed values reduced by 15% less than
above recommendations.
For 4 x D and 5 x D, it is recommended to reduce the feed rate during entry and exit by 30–50%.
Condition: S = stable conditions,
U = unstable cutting conditions,
I = interrupted cutting conditions
Pocket Seat: P = periphery insert,
C = centre insert
WID_Master16_Holemaking_IndexableDrills_V028_V029_Metric_REBRAND.indd 29 11/10/15 5:01 PM
V30
LViWID M 16 H l ki I d bl D ill V030 V031 M i REBRANDN b 10 20153 30PM
widia.com
Top Cut 4 • Stainless Steel • 2 x D/3 x D • Feed Chart • Metric
Top Cut 4
Recommended Feed Rate by Diameter (mm/r)
Insert Size E Insert Size F Insert Size G Insert Size H
TCF120405EC
TCF100408EP
30,00–36,99mm
TCF150406FC
TCF120412FP
37,00–45,99mm
TCF180508GC
TCF150512GP
46,00–56,99mm
TCF210608HC
TCF180614HP
57,00–68,00mm
Material
Group Condition
Pocket
Seat Geometry Grade min Start max min Start max min Start max min Start max
M
1
SP V36 WU40PH 0,12 0,14 0,20 0,14 0,16 0,25 0,16 0,18 0,28 0,16 0,20 0,30
C V36 WU40PH
UP V36 WU40PH 0,11 0,13 0,18 0,12 0,14 0,22 0,14 0,16 0,25 0,14 0,18 0,26
C V36 WU40PH
IP V36 WU40PH 0,11 0,13 0,18 0,12 0,14 0,22 0,14 0,16 0,25 0,14 0,18 0,26
C V36 WU40PH
2
SP V36 WU40PH 0,12 0,14 0,20 0,14 0,16 0,25 0,16 0,18 0,28 0,16 0,20 0,30
C V36 WU40PH
UP V36 WU40PH 0,11 0,13 0,18 0,12 0,14 0,22 0,14 0,16 0,25 0,14 0,18 0,26
C V36 WU40PH
IP V36 WU40PH 0,11 0,13 0,18 0,12 0,14 0,22 0,14 0,16 0,25 0,14 0,18 0,26
C V36 WU40PH
3
SP V36 WU40PH 0,12 0,14 0,20 0,14 0,16 0,25 0,16 0,18 0,28 0,16 0,20 0,30
C V36 WU40PH
UP V36 WU40PH 0,11 0,13 0,18 0,12 0,14 0,22 0,14 0,16 0,25 0,14 0,18 0,26
C V36 WU40PH
IP V36 WU40PH 0,11 0,13 0,18 0,12 0,14 0,22 0,14 0,16 0,25 0,14 0,18 0,26
C V36 WU40PH
Indexable Drills
Indexable Drills
Application Data • Top Cut 4™
NOTE: For 4 x D, it is highly recommended to start with feed and speed values reduced by 10% less than above recommendations.
For 5 x D, diameter range 12–23,99mm (insert sizes A to C), it is highly recommended to start with feed and speed values reduced by 20% less than
above recommendations.
For 5 x D, diameter range 24–68mm (insert sizes D to H), it is highly recommended to start with feed and speed values reduced by 15% less than
above recommendations.
For 4 x D and 5 x D, it is recommended to reduce the feed rate during entry and exit by 30–50%.
Condition: S = stable conditions,
U = unstable cutting conditions,
I = interrupted cutting conditions
Pocket Seat: P = periphery insert,
C = centre insert
WID_Master16_Holemaking_IndexableDrills_V030_V031_Metric_REBRAND.indd 30 11/10/15 5:01 PM
V31
LViWID M 16 H l ki I d bl D ill V030 V031 M i REBRANDN b 1020153 30PM
widia.com
Top Cut 4 • Stainless Steel • 2 x D/3 x D • Speed Chart • Metric
Top Cut 4
Recommended Cutting Speed by Diameter (m/min)
Insert Size E Insert Size F Insert Size G Insert Size H
TCF120405EC
TCF100408EP
30,00–36,99mm
TCF150406FC
TCF120412FP
37,00–45,99mm
TCF180508GC
TCF150512GP
46,00–56,99mm
TCF210608HC
TCF180614HP
57,00–68,00mm
Material
Group Condition
Pocket
Seat Geometry Grade min Start max min Start max min Start max min Start max
M
1
SP V36 WU40PH 150 170 240 150 170 240 150 170 240 150 170 240
C V36 WU40PH
UP V36 WU40PH 130 160 210 130 160 210 130 160 210 130 160 210
C V36 WU40PH
IP V36 WU40PH 130 160 200 130 160 200 130 160 200 130 160 200
C V36 WU40PH
2
SP V36 WU40PH 150 170 210 150 170 210 150 170 210 150 170 210
C V36 WU40PH
UP V36 WU40PH 130 160 200 130 160 200 130 160 200 130 160 200
C V36 WU40PH
IP V36 WU40PH 130 150 180 130 150 180 130 150 180 130 150 180
C V36 WU40PH
3
SP V36 WU40PH 140 160 200 140 160 200 140 160 200 140 160 200
C V36 WU40PH
UP V36 WU40PH 130 140 180 130 140 180 130 140 180 130 140 180
C V36 WU40PH
IP V36 WU40PH 110 130 160 110 130 160 110 130 160 110 130 160
C V36 WU40PH
Indexable Drills
Indexable Drills
Application Data • Top Cut 4™
NOTE: For 4 x D, it is highly recommended to start with feed and speed values reduced by 10% less than above recommendations.
For 5 x D, diameter range 12–23,99mm (insert sizes A to C), it is highly recommended to start with feed and speed values reduced by 20% less than
above recommendations.
For 5 x D, diameter range 24–68mm (insert sizes D to H), it is highly recommended to start with feed and speed values reduced by 15% less than
above recommendations.
For 4 x D and 5 x D, it is recommended to reduce the feed rate during entry and exit by 30–50%.
Condition: S = stable conditions,
U = unstable cutting conditions,
I = interrupted cutting conditions
Pocket Seat: P = periphery insert,
C = centre insert
WID_Master16_Holemaking_IndexableDrills_V030_V031_Metric_REBRAND.indd 31 11/10/15 5:02 PM
V32
LViWID M 16 H l ki I d bl D ill V032 V033 M i REBRANDN b 10 20153 31PM
widia.com
Indexable Drills
Top Cut 4 • Cast Iron • 2 x D/3 x D • Feed Chart • Metric
Top Cut 4
Recommended Feed Rate by Diameter (mm/r)
Insert Size A Insert Size B Insert Size C Insert Size D
TCF040203AC
TCF040204AP
12,00–13,99mm
TCF060203BC
TCF050204BP
14,00–18,99mm
TCF070304CC
TCF070306CP
19,00–23,99mm
TCF090305DC
TCF080308DP
24,00–29,99mm
Material
Group Condition
Pocket
Seat Geometry Grade min Start max min Start max min Start max min Start max
K
1
SP V34 WPK10CH 0,08 0,10 0,14 0,08 0,10 0,16 0,10 0,13 0,18 0,12 0,16 0,24
C V34 WU25CH
UP V34 WU25CH 0,08 0,10 0,14 0,08 0,10 0,16 0,10 0,13 0,18 0,12 0,16 0,24
C V34 WU40PH
IP V34 WU40PH 0,08 0,10 0,14 0,08 0,10 0,16 0,10 0,13 0,18 0,12 0,16 0,24
C V34 WU40PH
2
SP V34 WPK10CH 0,08 0,10 0,14 0,08 0,10 0,16 0,10 0,13 0,18 0,12 0,16 0,24
C V34 WU25CH
UP V34 WU25CH 0,08 0,10 0,14 0,08 0,10 0,16 0,10 0,13 0,18 0,12 0,16 0,24
C V34 WU40PH
IP V34 WU40PH 0,08 0,10 0,14 0,08 0,10 0,16 0,10 0,13 0,18 0,12 0,16 0,24
C V34 WU40PH
3
SP V34 WPK10CH 0,08 0,10 0,14 0,08 0,10 0,16 0,10 0,13 0,18 0,12 0,16 0,24
C V34 WU25CH
UP V34 WU25CH 0,08 0,10 0,14 0,08 0,10 0,16 0,10 0,13 0,18 0,12 0,16 0,24
C V34 WU40PH
IP V34 WU40PH 0,08 0,10 0,14 0,08 0,10 0,16 0,10 0,13 0,18 0,12 0,16 0,24
C V34 WU40PH
Indexable Drills
Application Data • Top Cut 4™
NOTE: For 4 x D, it is highly recommended to start with feed and speed values reduced by 10% less than above recommendations.
For 5 x D, diameter range 12–23,99mm (insert sizes A to C), it is highly recommended to start with feed and speed values reduced by 20% less than
above recommendations.
For 5 x D, diameter range 24–68mm (insert sizes D to H), it is highly recommended to start with feed and speed values reduced by 15% less than
above recommendations.
For 4 x D and 5 x D, it is recommended to reduce the feed rate during entry and exit by 30–50%.
Condition: S = stable conditions,
U = unstable cutting conditions,
I = interrupted cutting conditions
Pocket Seat: P = periphery insert,
C = centre insert
WID_Master16_Holemaking_IndexableDrills_V032_V033_Metric_REBRAND.indd 32 11/10/15 5:02 PM
V33
LViWID M 16 H l ki I d bl D ill V032 V033 M i REBRANDN b 1020153 31PM
widia.com
Top Cut 4
Recommended Cutting Speed by Diameter (m/min)
Insert Size A Insert Size B Insert Size C Insert Size D
TCF040203AC
TCF040204AP
12,00–13,99mm
TCF060203BC
TCF050204BP
14,00–18,99mm
TCF070304CC
TCF070306CP
19,00–23,99mm
TCF090305DC
TCF080308DP
24,00–29,99mm
Material
Group Condition
Pocket
Seat Geometry Grade min Start max min Start max min Start max min Start max
K
1
SP V34 WPK10CH 120 140 180 140 170 250 150 180 260 160 200 280
C V34 WU25CH
UP V34 WU25CH 110 120 160 130 160 240 140 170 250 150 180 260
C V34 WU40PH
IP V34 WU40PH 100 110 140 120 150 230 130 160 240 140 170 260
C V34 WU40PH
2
SP V34 WPK10CH 120 140 180 130 160 240 140 180 250 150 180 260
C V34 WU25CH
UP V34 WU25CH 110 120 160 120 150 230 130 160 240 140 160 250
C V34 WU40PH
IP V34 WU40PH 100 110 140 120 150 220 130 160 240 140 160 250
C V34 WU40PH
3
SP V34 WPK10CH 120 140 160 130 160 240 140 170 240 150 170 250
C V34 WU25CH
UP V34 WU25CH 110 120 140 120 150 230 130 160 230 140 160 240
C V34 WU40PH
IP V34 WU40PH 90 100 120 120 150 230 130 160 230 140 160 220
C V34 WU40PH
Indexable Drills
Indexable Drills
Application Data • Top Cut 4™
NOTE: For 4 x D, it is highly recommended to start with feed and speed values reduced by 10% less than above recommendations.
For 5 x D, diameter range 12–23,99mm (insert sizes A to C), it is highly recommended to start with feed and speed values reduced by 20% less than
above recommendations.
For 5 x D, diameter range 24–68mm (insert sizes D to H), it is highly recommended to start with feed and speed values reduced by 15% less than
above recommendations.
For 4 x D and 5 x D, it is recommended to reduce the feed rate during entry and exit by 30–50%.
Condition: S = stable conditions,
U = unstable cutting conditions,
I = interrupted cutting conditions
Pocket Seat: P = periphery insert,
C = centre insert
Top Cut 4 • Cast Iron • 2 x D/3 x D • Speed Chart • Metric
WID_Master16_Holemaking_IndexableDrills_V032_V033_Metric_REBRAND.indd 33 11/10/15 5:02 PM
V34
LViWID M 16 H l ki I d bl D ill V034 V035 M i REBRANDN b 10 20153 32PM
widia.com
Top Cut 4 • Cast Iron • 2 x D/3 x D • Feed Chart • Metric
Top Cut 4
Recommended Feed Rate by Diameter (mm/r)
Insert Size E Insert Size F Insert Size G Insert Size H
TCF120405EC
TCF100408EP
30,00–36,99mm
TCF150406FC
TCF120412FP
37,00–45,99mm
TCF180508GC
TCF150512GP
46,00–56,99mm
TCF210608HC
TCF180614HP
57,00–68,00mm
Material
Group Condition
Pocket
Seat Geometry Grade min Start max min Start max min Start max min Start max
K
1
SP V34 WPK10CH 0,14 0,16 0,26 0,16 0,20 0,3 0,18 0,22 0,32 0,20 0,24 0,36
C V34 WU25CH
UP V34 WU25CH 0,14 0,16 0,26 0,16 0,20 0,3 0,18 0,22 0,32 0,20 0,24 0,36
C V34 WU40PH
IP V34 WU40PH 0,14 0,16 0,26 0,16 0,20 0,3 0,18 0,22 0,32 0,20 0,24 0,36
C V34 WU40PH
2
SP V34 WPK10CH 0,14 0,16 0,26 0,16 0,20 0,3 0,18 0,22 0,32 0,20 0,24 0,36
C V34 WU25CH
UP V34 WU25CH 0,14 0,16 0,26 0,16 0,20 0,3 0,18 0,22 0,32 0,20 0,24 0,36
C V34 WU40PH
IP V34 WU40PH 0,14 0,16 0,26 0,16 0,20 0,3 0,18 0,22 0,32 0,20 0,24 0,36
C V34 WU40PH
3
SP V34 WPK10CH 0,14 0,16 0,26 0,16 0,20 0,3 0,18 0,22 0,32 0,20 0,24 0,36
C V34 WU25CH
UP V34 WU25CH 0,14 0,16 0,26 0,16 0,20 0,3 0,18 0,22 0,32 0,20 0,24 0,36
C V34 WU40PH
IP V34 WU40PH 0,14 0,16 0,26 0,16 0,20 0,3 0,18 0,22 0,32 0,20 0,24 0,36
C V34 WU40PH
Indexable Drills
Application Data • Top Cut 4™
NOTE: For 4 x D, it is highly recommended to start with feed and speed values reduced by 10% less than above recommendations.
For 5 x D, diameter range 12–23,99mm (insert sizes A to C), it is highly recommended to start with feed and speed values reduced by 20% less than
above recommendations.
For 5 x D, diameter range 24–68mm (insert sizes D to H), it is highly recommended to start with feed and speed values reduced by 15% less than
above recommendations.
For 4 x D and 5 x D, it is recommended to reduce the feed rate during entry and exit by 30–50%.
Condition: S = stable conditions,
U = unstable cutting conditions,
I = interrupted cutting conditions
Pocket Seat: P = periphery insert,
C = centre insert
Indexable Drills
WID_Master16_Holemaking_IndexableDrills_V034_V035_Metric_REBRAND.indd 34 11/10/15 5:02 PM
V35
LViWID M 16 H l ki I d bl D ill V034 V035 M i REBRANDN b 1020153 32PM
widia.com
Top Cut 4 • Cast Iron • 2 x D/3 x D • Speed Chart • Metric
Top Cut 4
Recommended Cutting Speed by Diameter (m/min)
Insert Size E Insert Size F Insert Size G Insert Size H
TCF120405EC
TCF100408EP
30,00–36,99mm
TCF150406FC
TCF120412FP
37,00–45,99mm
TCF180508GC
TCF150512GP
46,00–56,99mm
TCF210608HC
TCF180614HP
57,00–68,00mm
Material
Group Condition
Pocket
Seat Geometry Grade min Start max min Start max min Start max min Start max
K
1
SP V34 WPK10CH 160 200 280 160 200 280 160 200 280 160 200 280
C V34 WU25CH
UP V34 WU25CH 150 180 260 150 180 260 150 180 260 150 180 260
C V34 WU40PH
IP V34 WU40PH 140 170 260 140 170 260 140 170 260 140 170 260
C V34 WU40PH
2
SP V34 WPK10CH 150 180 260 150 180 260 150 180 260 150 180 260
C V34 WU25CH
UP V34 WU25CH 140 160 250 140 160 250 140 160 250 140 160 250
C V34 WU40PH
IP V34 WU40PH 140 160 250 140 160 250 140 160 250 140 160 250
C V34 WU40PH
3
SP V34 WPK10CH 150 170 250 150 170 250 150 170 250 150 170 250
C V34 WU25CH
UP V34 WU25CH 140 160 240 140 160 240 140 160 240 140 160 240
C V34 WU40PH
IP V34 WU40PH 140 160 220 140 160 220 140 160 220 140 160 220
C V34 WU40PH
Indexable Drills
Application Data • Top Cut 4™
Indexable Drills
NOTE: For 4 x D, it is highly recommended to start with feed and speed values reduced by 10% less than above recommendations.
For 5 x D, diameter range 12–23,99mm (insert sizes A to C), it is highly recommended to start with feed and speed values reduced by 20% less than
above recommendations.
For 5 x D, diameter range 24–68mm (insert sizes D to H), it is highly recommended to start with feed and speed values reduced by 15% less than
above recommendations.
For 4 x D and 5 x D, it is recommended to reduce the feed rate during entry and exit by 30–50%.
Condition: S = stable conditions,
U = unstable cutting conditions,
I = interrupted cutting conditions
Pocket Seat: P = periphery insert,
C = centre insert
WID_Master16_Holemaking_IndexableDrills_V034_V035_Metric_REBRAND.indd 35 11/10/15 5:02 PM
V36
LViWID M 16 H l ki I d bl D ill V036 V037 M i REBRANDO b 16 20158 04AM
widia.com
Indexable Drills
Application Data • Top Cut 4™
Top Cut 4 • Drill Depth • 4 x D/5 x D • Hole Tolerance Table
Insert size Diameter Range (mm) Hole Tolerance (mm)
A 12,00–13,99 +/- 0,20
B 14,00–18,99 +/- 0,20
C 19,00–23,99 +/- 0,20
D 24,00–29,99 +/- 0,20
E 30,00–36,99 +/- 0,20
F 37,00–45,99 +/- 0,25
G 46,00–56,99 +/- 0,25
H 57,00–68,00 +/- 0,28
Insert size Diameter Range (mm) Hole Tolerance (mm)
A 12,00–13,99 +/- 0,35
B 14,00–18,99 +/- 0,35
C 19,00–23,99 +/- 0,35
D 24,00–29,99 +/- 0,35
E 30,00–36,99 +/- 0,35
F 37,00–45,99 +/- 0,38
G 46,00–56,99 +/- 0,38
H 57,00–68,00 +/- 0,42
Coolant Requirement/Recommendation
120
100
80
60
40
20
0
12 16 20 24 28 32 36 40 44 48 52 56 60 64 68
Coolant Quantity Volume
vs Drill Diameter D1
Coolant Quantity V (I/min)
Drill Diameter D1 (mm)
Maximum
Minimum
Top Cut 4 • Drill Depth • 2 x D/3 x D • Hole Tolerance Table
WID_Master16_Holemaking_IndexableDrills_V036_V037_Metric_REBRAND.indd 36 10/29/15 1:27 PM
V37
LViWID M 16 H l ki I d bl D ill V036 V037 M i REBRANDO b 1620158 04AM
widia.com
Indexable Drills
Power Requirement
Power Requirement
Steel 4140
Power [kW]
Drill Diameter D1 (mm)
Stainless Steel 304
Power [kW]
Drill Diameter D1 (mm)
Cast Iron GG25
Power [kW]
Drill Diameter D1 (mm)
f = 0.12
(160 m/min)
f = 0.25
(160 m/min)
f = 0.16
(200 m/min)
f = 0.16
(160 m/min)
f = 0.12
(200 m/min)
f = 0.20
(200 m/min)
f = 0.20
(160 m/min)
f = 0.25
(200 m/min)
f = 0.12
(160 m/min)
f = 0.20
(160 m/min)
f = 0.18
(200 m/min)
f = 0.15
(160 m/min)
f = 0.12
(200 m/min)
f = 0.20
(200 m/min)
f = 0.18
(160 m/min)
f = 0.15
(200 m/min)
f = 0.12
(160 m/min)
f = 0.25
(160 m/min)
f = 0.20
(240 m/min)
f = 0.16
(160 m/min)
f = 0.12
(240 m/min)
f = 0.25
(240 m/min)
f = 0.20
(160 m/min)
f = 0.16
(240 m/min)
WID_Master16_Holemaking_IndexableDrills_V036_V037_Metric_REBRAND.indd 37 10/29/15 1:27 PM
V38
LViWID M 16 H l ki I d bl D ill V038 V039 M i REBRANDO b 16 20158 04AM
widia.com
Indexable Drills
Feed Force Requirement
Feed Force Requirement
12 16 20 24 28 32 36 40 44 48 52 56 60 64 68
9
10
8
7
6
5
4
3
2
1
0
f = 0.12
f = 0.16
f = 0.20
f = 0.25
Steel 4140
Drill Diameter D1 (mm)
Feed Force [kN]
12 16 20 24 28 32 36 40 44 48 52 56 60 64 68
9
10
8
7
6
5
4
3
2
1
0
f = 0.12
f = 0.15
f = 0.18
f = 0.20
Stainless Steel 304
Drill Diameter D1 (mm)
Feed Force [kN]
12 16 20 24 28 32 36 40 44 48 52 56 60 64 68
9
10
8
7
6
5
4
3
2
1
0
f = 0.12
f = 0.16
f = 0.20
f = 0.25
Cast Iron GG25
Feed Force [kN]
Drill Diameter D1 (mm)
WID_Master16_Holemaking_IndexableDrills_V038_V039_Metric_REBRAND.indd 38 10/29/15 1:27 PM
V39
LViWID M 16 H l ki I d bl D ill V038 V039 M i REBRANDO b 1620158 04AM
widia.com
Indexable Drills
Torque Requirement
Torque Requirement
12 16 20 24 28 32 36 40 44 48 52 56 60 64 68
500
450
400
350
300
250
200
150
100
50
0
f = 0.12
f = 0.15
f = 0.18
f = 0.20
Torque [Nm]
Drill Diameter D1 (mm)
Stainless Steel 304
12 16 20 24 28 32 36 40 44 48 52 56 60 64 68
500
450
400
350
300
250
200
150
100
50
0
f = 0.12
f = 0.16
f = 0.20
f = 0.25
Torque [Nm]
Drill Diameter D1 (mm)
Cast Iron GG25
500
450
400
350
300
250
200
150
100
50
0
12 16 20 24 28 32 36 40 44 48 52 56 60 64 68
f = 0.12
f = 0.16
f = 0.20
f = 0.25
Steel 4140
Torque [Nm]
Drill Diameter D1 (mm)
WID_Master16_Holemaking_IndexableDrills_V038_V039_Metric_REBRAND.indd 39 10/29/15 1:27 PM
V40
LViWID M 16 H l ki I d bl D ill V040 V041 M i REBRANDO b 29 201511 29AM
widia.com
Indexable Drills
X-Offset Capabilities
X-Offset Capabilities • Metric
Insert size Diameter Range (mm)
2 x D and 3 x D 4 x D 5 x D
X-offset value
max. in mm
D1 max
value
X-offset value
max. in mm
D1 max
value
X-offset
value max.
D1 max
value
A
12,00–13,99 0,5 D1 + 1mm 0,5 D1 + 1mm — —
B
14,00–18,99 0,5 D1 + 1mm 0,5 D1 + 1mm — —
C
19,00–23,99 0,5 D1 + 1mm 0,5 D1 + 1mm — —
D
24,00–29,99 0,8 D1 + 1,6mm 0,8 D1 + 1mm — —
E
30,00–36,99 0,8 D1 + 1,6mm 0,8 D1 + 1mm — —
F
37,00–45,99 0,8 D1 + 1,6mm 0,8 D1 + 1mm — —
G
46,00–56,99 1 D1 + 2mm 0,8 D1 + 1mm — —
H
57,00–68,00 1 D1 + 2mm 0,8 D1 + 1mm — —
WID_Master16_Holemaking_IndexableDrills_V040_V041_Metric_REBRAND.indd 40 10/29/15 1:27 PM
Specifi cally designed for versatility — Top Cut 4 offers outstanding fl exibility, increased productivity,
and is the one tool to apply to a variety of drilling applications and different workpiece materials.
• High tool life at accelerated speeds.
• Effi cient chip evacuation.
• Increased coolant supply.
• Up to 5 x D.
To learn more about the benefi ts of WIDIA™ Top Cut 4, contact your local distributor.
Top Cut 4™
Unmatched
Versatility
Meets Powerful
Performance
WID_Master16_Holemaking_IndexableDrills_V040_V041_Metric_REBRAND.indd 41 10/29/15 1:27 PM
LViWID M 16 H l ki I d bl D ill V042 V043 M i REBRANDD b 9 201511 48AM
WIDIA™ Reconditioning Services Optimise the Total Value
of Metalcutting Tools Throughout Their Entire Life
• Local support you can trust.
• Rapid turnaround to minimise inventory.
• Like-new performance continues delivering productivity.
• Application support throughout the tool lifecycle.
• WIDIA proprietary geometry specifi cations after each regrind.
• WIDIA certifi ed coatings.
• Easy logistics through the reconditioning process.
WIDIA Reconditioning Services optimise the value of metalcutting tools throughout their entire lifecycle by
giving like-new performance — with rapid turnaround time — so tools are always on hand and perform
just like new.
Simple Logistics
Our unique reconditioning program simplifi es sending and receiving reconditioned
tools to reduce shipping time and increase on-hand inventory.
To use WIDIA tool reconditioning services, contact your authorised
WIDIA distributor to get started.
Reconditioning Services
WID_Master16_Holemaking_IndexableDrills_V042_V043_Metric_REBRAND.indd 2 12/9/15 11:48 AM
LViWID M 16 H l ki I d bl D ill V042 V043 M i REBRANDD b 9201511 48AM
Huntley, IL
Kingwinford, UK
Istanbul, Turkey
Shlomi, Israel
Tianjin, China
Shanghai, China
Busan, Korea
Bangalore, India
Zory, Poland
Gurgaon, India
Pune, India
Koenigsee, Germany
Barcelona, Spain Milan,
Italy
Indaiatuba,
Brazil
Whitehouse, OH
Asheboro, NC
Global Reconditioning Network
To locate a Reconditioning Center near you, visit widia.com/services.
WID_Master16_Holemaking_IndexableDrills_V042_V043_Metric_REBRAND.indd 3 12/9/15 11:48 AM
LViWID M 16 H l ki H l i hi W000 W001 M i REBRANDD b 14 20152 33PM
WID_Master16_Holemaking_Holefinishing_W000_W001_Metric_REBRAND.indd 1 12/14/15 2:41 PM
W1
LViWID M 16 H l ki H l fi i hi W000 W001 M i REBRANDD b 1420152 33PM
widia.com
Holemaking • Hole Finishing
Introduction .........................................................................................................................................................W2–W5
HSR Reaming Tools .........................................................................................................................................W6–W29
WIDIA TRM ......................................................................................................................................................W30–W33
ROTAFLEX ......................................................................................................................................................W34–W71
Custom Solutions ...........................................................................................................................................W72–W81
WID_Master16_Holemaking_Holefinishing_W000_W001_Metric_REBRAND.indd 1 12/14/15 2:41 PM
W2
LViWID M 16 H l ki H l i hi W002 W003 M i REBRANDN b 12 201510 16AM
widia.com
Hole Finishing with WIDIA
WIDIA is one of the only sources in the metalworking industry that offers all types of hole fi nishing
tooling — from reaming and fi ne boring to motion tooling. By owning the entire process chain —
from raw materials to reconditioning — WIDIA offers customised solutions to meet any imaging
challenge, regardless of portfolio or capacity.
Hole Finishing with WIDIA™
WID_Master16_Holemaking_Holefinishing_W002_W003_Metric_REBRAND.indd 2 11/12/15 11:59 AM
W3
LViWID M 16 H l ki H l fi i hi W002 W003 M i REBRANDN b 12201510 16AM
widia.com
Solid Carbide
REAMING
BORING
COUNTERSINKING
Porting
Fluid Power
PCD ROUND TOOLS
Steel-based Carbide-based
Modular
Countersinkers
Tipped
Roughing Finishing
WID_Master16_Holemaking_Holefinishing_W002_W003_Metric_REBRAND.indd 3 11/12/15 11:59 AM
W4
LViWID M 16 H l ki H l i hi W004 W005 M i REBRANDN b 10 20153 44PM
widia.com
standard diameter
engineered
solution diameter
PMKNSH range accuracy range accuracy
reaming tools
HSR
™
— Solid Carbide
High-Speed Reamer
Carbide
.196–.551"
5–14mm IT7 .056–1.00"
1,4–25,4mm
IT6
>.39"
>10mm
.0004"
10 μm .0003"
7 μm
HSR — Carbide Tipped
High-Speed Reamer
Carbide/Cermet
.551–1.26"
14–32mm IT7 .551–2.55"
14–65mm IT6 .0004"
10 μm .0003"
7 μm
rst choice
alternate choice
Hole Finishing
Tool Selection Guide
Hole Finishing
Cylindricity
NOTE: Process- and application-dependent.
Highly dependent on the pre-machine hole accuracy.
Use of high-performance drilling/pre-machining tools
mandatory to reach values.
Position
NOTE: Process- and application-dependent.
Highly dependent on the pre-machine hole accuracy.
Use of high-performance drilling/pre-machining tools
mandatory to reach values.
PCD
PCD
Round Tools
Steel Base CBN
––
.394–4.00"
10–100mm IT6 .0004"
10 μm .0004"
10 μm
PCD
Round Tools
Carbide Base
––
.197–1.00"
5–25mm IT6 .0002"
5 μm .0003"
7 μm
countersinking
Countersinking
Round Tools
Steel Base
– – – IT7 .0004"
10 μm .0004"
10 μm
Port Cutters
Carbide/Cermet
Steel Base
for standard
ports
SAE, BSPP,
ISO
– – IT7 .0004"
10 μm .0004"
10 μm
boring/fine-boring tools
ROTAFLEX
™
FBHBB
Fine-Boring
Carbide/Cermet/PCD/CBN
.236–.866"
6–22mm IT7 — — .0002"
5 μm
.0002–
.0004"
5–10 μm
ROTAFLEX FBH
Fine-Boring
Carbide/Cermet/PCD/CBN
.866–4.25"
22–115mm IT7 — — .0002"
5 μm
.0002–
.0004"
5–10 μm
ROTAFLEX TCHS
Roughing
Carbide/Cermet/PCD/CBN
.886–4.52"
22,5–115mm IT7 — — .0004"
10 μm >.0008"
>20 μm
ROTAFLEX Small Bridge Tools
Roughing
Carbide/Cermet/PCD/CBN
3.425–7.87"
87–200mm IT7 — — .0004"
10 μm >.0008"
>20 μm
ROTAFLEX Large Bridge Tools
Roughing
Carbide/Cermet/PCD/CBN
7.87–20.47"
200–520mm IT7 — — .0004"
10 μm >.0008"
>20 μm
Fine-Boring Cartridges
Fine-Boring
Carbide/Cermet/PCD/CBN
3.425–20.47"
87–520mm IT7 — — .0002"
5 μm
.0002–
.0004"
5–10 μm
WID_Master16_Holemaking_Holefinishing_W004_W005_Metric_REBRAND.indd 4 11/10/15 5:00 PM
W5
LViWID M 16 H l ki H l fi i hi W004 W005 M i REBRANDN b 1020153 44PM
widia.com
achievable surface quality Ra
capability
cost/part cycle time
required
operator
experience page(s)
PMKNSH
20–40 μ-in
0,5–1,0 μm 20–40 μ-in
0,5–1,0 μm 20–60 μ-in
0,5–1,5 μm
–
20–40 μ-in
0,5–1,0 μm
–
moderate low low
W8–W10,
W13–W14
20–40 μ-in
0,5–1,0 μm 20–40 μ-in
0,5–1,0 μm 20–60 μ-in
0,5–1,5 μm
–
20–40 μ-in
0,5–1,0 μm
–
moderate low low
W11–W12,
W15–W16
carbide
only
carbide
only
Hole Finishing
Tool Selection Guide
Hole Finishing
Ra Surface roughness
NOTE: Surface roughness values are guidelines and depend on the application, coolant situation, machine, and cutting data applied.
32–80 μ-in
0,8–2,0 μm 32–80 μ-in
0,8–2,0 μm 32–80 μ-in
0,8–2,0 μm 32–80 μ-in
0,8–2,0 μm 32–80 μ-in
0,8–2,0 μm <48 μ-in
<1,2 μm
low moderate low–
moderate W49–W51
32–80 μ-in
0,8–2,0 μm 32–80 μ-in
0,8–2,0 μm 32–80 μ-in
0,8–2,0 μm 32–80 μ-in
0,8–2,0 μm 32–80 μ-in
0,8–2,0 μm <48 μ-in
<1,2 μm
low moderate low–
moderate W52–W53
40–200 μ-in
1,0–5,0 μm 40–200 μ-in
1,0–5,0 μm 40–200 μ-in
1,0–5,0 μm 40–80 μ-in
1,0–2,0 μm 40–200 μ-in
1,0–5,0 μm
– low moderate low–
moderate W36–W37
40–200 μ-in
1,0–5,0 μm 40–200 μ-in
1,0–5,0 μm 40–200 μ-in
1,0–5,0 μm 40–80 μ-in
1,0–2,0 μm 40–200 μ-in
1,0–5,0 μm
– low low low–
moderate W38–W39
40–200 μ-in
1,0–5,0 μm 40–200 μ-in
1,0–5,0 μm 40–200 μ-in
1,0–5,0 μm 40–80 μ-in
1,0–2,0 μm 40–200 μ-in
1,0–5,0 μm
– low moderate low–
moderate W40–W45
32–80 μ-in
0,8–2,0 μm 32–80 μ-in
0,8–2,0 μm 32–80 μ-in
0,8–2,0 μm 32–80 μ-in
0,8–2,0 μm 32–80 μ-in
0,8–2,0 μm
– low moderate low–
moderate W46–W48
–––
4–32 μ-in
0,1–0,8 μm ––
low very low moderate
W80–W81
–––
4–32 μ-in
0,1–0,8 μm ––
low very low moderate
W80–W81
32–80μ-in
-2,0 μm 32–80μ-in
-2,0 μm 32–80μ-in
-2,0 μm 32–80 μ-in
0,8–2,0 μm
––
very low very low moderate W76–W77
32–80μ-in
-2,0 μm 32–80μ-in
-2,0 μm 32–80μ-in
-2,0 μm 32–80 μ-in
0,8–2,0 μm
––
very low very low moderate W74–W75
WID_Master16_Holemaking_Holefinishing_W004_W005_Metric_REBRAND.indd 5 11/10/15 5:00 PM
W6
LViWID M 16 H l ki H l i hi W006 W007 M i REBRANDN b 12 201510 36AM
widia.com
Features and Benefi ts
• Lapped ground leads for high-speed cutting.
• Long tool life with increased hole and surface quality.
• High Metal Removal Rates (MRR) at increased speeds
and feeds.
• Radial coolant supply for through hole applications and
axial coolant supply for blind holes to achieve higher
feed rates.
• Decreased runout and improved straightness
due to unequal fl utes.
Customisation
• Diameters starting at 1,40mm (.055") up to 14,15mm
(.557") available with and without internal coolant
in 0,001mm steps.
• Solid cermet reaming tools and tooling for heat-
resistant materials are available on request.
HSR Solid Carbide Reaming Tools
• Diameters starting at 1,40mm (.055") with internal coolant
supply available as standard.
• Ground to H7 tolerance class for use in most applications.
• Specifi c coatings and lead confi gurations available for high-
speed machining of steel, stainless steel, and cast iron.
• Uncoated micrograin substrates for machining stainless steel
and non-ferrous materials at accelerated speeds.
HSR™ Reaming Tools combine high-performance micrograin
substrates, specifi c coatings, and extremely unequal fl utes for
outstanding machining results. Increase your productivity with
the HSR leads and lapped grinding surface of rake, clearance,
and relief angle.
HSR Reaming Tools
WID_Master16_Holemaking_Holefinishing_W006_W007_Metric_REBRAND.indd 6 11/12/15 11:59 AM
W7
LViWID M 16 H l ki H l fi i hi W006 W007 M i REBRANDN b 12201510 36AM
widia.com
HSR™ Carbide- and Cermet-Tipped Reaming Tools
• Achieve solid carbide and solid cermet metal removal rates from 14–32mm (.551–1.26")
with no customisation required.
• Ground to H7 tolerance class to accomodate most applications.
• Specifi c coatings and lead confi guration for high-speed machining of steel, stainless steel,
cast iron, and non-ferrous materials at accelerated speeds.
• Coated and uncoated micrograin substrate carbide and coated cermet specifi cally
engineered for reaming.
Features and Benefi ts
• Lapped ground leads for high-speed cutting.
• Long tool life with increased hole and surface quality.
• High metal removal rates at higher speeds and feeds.
• Decreased runout and improved straightness due to
unequal fl utes.
• Adjustment screw at straight-fl uted HSR reamers to
change internal coolant supply from axial to radial.
• Optimised coolant options for blind holes and blind hole
applications with interrupted cut.
Customisation
• Diameters up to 50mm (1.968") available with and
without internal coolant in 0,001mm steps.
• HSR tooling for machining heat-resistant materials is
available on request.
WID_Master16_Holemaking_Holefinishing_W006_W007_Metric_REBRAND.indd 7 11/12/15 11:59 AM
W8
LViWID M 16 H l ki H l i hi W008 W009 M i REBRANDO b 16 20158 08AM
widia.com
K10
Hole Finishing
HSR™ Solid Carbide Reaming Tools
HSR Reamers with Helical Flutes for Through Holes • K10
™
• 1,4–10mm
grade K10
uncoated
order # catalogue # D1 D L L4 L10 LS Z
2293636 050221-000014 1,40 1,40 40 18 8 22 3
2293637 050221-000015 1,50 1,50 40 18 8 22 3
2293638 050221-000016 1,60 1,60 43 20 9 23 3
2283423 050221-000020 2,00 2,00 49 24 11 25 4
2283424 050221-000022 2,20 2,20 53 26 12 27 4
2283426 050221-000025 2,50 2,50 57 28 14 29 4
2283427 050221-000028 2,80 2,80 61 32 15 29 4
2283428 050221-000030 3,00 3,00 61 32 15 29 6
2283429 050221-000032 3,20 3,20 65 35 16 30 6
2283430 050221-000035 3,50 3,50 70 40 18 30 6
2283431 050221-000040 4,00 4,00 75 41 19 32 6
2293640 050221-000045 4,50 4,50 80 44 21 33 6
2283445 050221-000050 5,00 5,00 86 51 23 34 6
2293641 050221-000055 5,50 5,60 93 57 26 36 6
2293642 050221-000060 6,00 5,60 93 53 26 36 6
2293643 050221-000065 6,50 6,30 101 63 28 38 6
2293644 050221-000070 7,00 7,10 109 69 31 40 6
2283450 050221-000075 7,50 7,10 109 69 31 40 6
2283451 050221-000080 8,00 8,00 117 75 33 42 6
2283463 050221-000085 8,50 8,00 117 75 33 42 6
2283464 050221-000090 9,00 9,00 125 81 36 44 6
2283465 050221-000095 9,50 9,00 125 81 36 44 6
2283466 050221-000100 10,00 10,00 133 87 38 46 6
Hole Finishing
rst choice
alternate choice
WID_Master16_Holemaking_Holefinishing_W008_W009_Metric_REBRAND.indd 8 10/29/15 1:27 PM
W9
LViWID M 16 H l ki H l fi i hi W008 W009 M i REBRANDO b 1620158 08AM
widia.com
K10F K10F-DCFD
Hole Finishing
HSR™ Solid Carbide Reaming Tools
HSR Reamers with Helical Flutes for Through Holes • K10F
™
/K10F-DCFD
™
• 2–144mm
grade K10F
uncoated
order # catalogue #
grade K10F-DCFD
TiAlN
order # catalogue # D1 D L L4 L10 LS Z
2436494 050227-000200 2441162 450227-000200 2,00 3,00 48 15 6 28 4
2436871 050227-000300 2441253 450227-000300 3,00 3,00 48 15 6 28 4
2436872 050227-000400 2441254 450227-000400 4,00 4,00 54 21 8 28 4
2436913 050227-000500 2441256 450227-000500 5,00 6,00 74 32 12 36 4
2436914 050227-000600 2441257 450227-000600 6,00 6,00 74 33 12 36 4
2436916 050227-000800 2441260 450227-000800 8,00 8,00 91 50 16 36 6
2436919 050227-001000 2441261 450227-001000 10,00 10,00 103 58 20 40 6
2436922 050227-001200 2441284 450227-001200 12,00 12,00 118 68 24 45 6
2436946 050227-001400 2441285 450227-001400 14,00 14,00 132 81 28 45 6
• Standard reamers listed are ground to achieve an H7 tolerance hole.
IT6 hole tolerance capability starting at diameter 10mm is available
as a Custom Solution. Additional diameters and lengths made to order.
Hole Finishing
rst choice
alternate choice
WID_Master16_Holemaking_Holefinishing_W008_W009_Metric_REBRAND.indd 9 10/29/15 1:27 PM
W10
LViWID M 16 H l ki H l i hi W010 W011 M i REBRANDO b 16 20158 08AM
widia.com
Hole Finishing
HSR™ Solid Carbide Reaming Tools
HSR Reamers with Helical Flutes for Through Holes • K10F
™
/K10F-DCFD
™
• 5–14mm
K10F K10F-DCFD
• Standard reamers listed are ground to achieve an H7 tolerance hole.
IT6 capability is available. Additional diameters and lengths made to order.
Hole Finishing
grade K10F
uncoated
order # catalogue #
grade K10F-DCFD
TiAlN
order # catalogue # D1 D L L4 L10 LS Z
2437425 050271-000500 2441380 450271-000500 5,00 6,00 74 32 12 36 4
2437426 050271-000600 2441381 450271-000600 6,00 6,00 74 33 12 36 4
2437428 050271-000800 2441453 450271-000800 8,00 8,00 91 50 16 36 6
2437430 050271-001000 2441455 450271-001000 10,00 10,00 103 58 20 40 6
2437432 050271-001200 2441457 450271-001200 12,00 12,00 118 68 24 45 6
2437468 050271-001400 2441494 450271-001400 14,00 14,00 132 81 28 45 6
rst choice
alternate choice
WID_Master16_Holemaking_Holefinishing_W010_W011_Metric_REBRAND.indd 10 10/29/15 1:27 PM
W11
LViWID M 16 H l ki H l fi i hi W010 W011 M i REBRANDO b 1620158 08AM
widia.com
Hole Finishing
HSR™ Carbide-Tipped Reaming Tools
HSR Reamers with Helical Flutes for Through Holes • K10F
™
/K10F-DCFD
™
• 14–32mm
K10F K10F-DCFD
• Standard reamers listed are ground to achieve an H7 tolerance hole.
IT6 capability is available. Additional diameters and lengths made to order.
Hole Finishing
grade K10F
uncoated
order # catalogue #
grade K10F-DCFD
TiAlN
order # catalogue # D1 D L L4 L10 LS Z
3084978 050281-001400 3084312 450281-001400 14,00 16,00 145 90 9 48 6
3084983 050281-001600 3084317 450281-001600 16,00 20,00 157 100 9 50 6
3084992 050281-001800 3084321 450281-001800 18,00 20,00 171 114 9 50 6
3085083 050281-002000 3084319 450281-002000 20,00 20,00 200 143 9 50 6
3085084 050281-002200 3084322 450281-002200 22,00 20,00 210 153 11 50 6
3085087 050281-002400 3084323 450281-002400 24,00 20,00 210 153 11 50 6
3085089 050281-002500 3084324 450281-002500 25,00 20,00 210 153 11 50 6
3085090 050281-002600 3084325 450281-002600 26,00 25,00 240 177 11 56 8
3085092 050281-002800 3084327 450281-002800 28,00 25,00 240 177 11 56 8
3085104 050281-003000 3084320 450281-003000 30,00 25,00 270 207 11 56 8
– 3084328 450281-003200 32,00 25,00 270 207 11 56 8
rst choice
alternate choice
WID_Master16_Holemaking_Holefinishing_W010_W011_Metric_REBRAND.indd 11 10/29/15 1:27 PM
W12
LViWID M 16 H l ki H l i hi W012 W013 M i REBRANDO b 16 20158 09AM
widia.com
Hole Finishing
HSR™ Cermet-Tipped Reaming Tools
HSR Reamers with Helical Flutes for Through Holes • CERMET-DCFD
™
• 14–20mm
Hole Finishing
• Standard reamers listed are ground to achieve an H7 tolerance hole.
IT6 capability is available. Additional diameters and lengths made to order.
CERMETDCFD
grade CERMET-DCFD
TiAlN
order # catalogue # D1 D L L4 L10 LS Z
3888130 456681-001400 14,00 16,00 145 76 8 49 6
3888131 456681-001500 15,00 16,00 145 76 8 49 6
3888132 456681-001600 16,00 20,00 157 86 8 51 6
3888403 456681-001700 17,00 20,00 157 86 10 51 6
3888404 456681-001800 18,00 20,00 171 100 10 51 6
3888405 456681-001900 19,00 20,00 171 100 10 51 6
3888406 456681-002000 20,00 20,00 200 129 10 51 6
rst choice
alternate choice
WID_Master16_Holemaking_Holefinishing_W012_W013_Metric_REBRAND.indd 12 10/29/15 1:27 PM
W13
LViWID M 16 H l ki H l fi i hi W012 W013 M i REBRANDO b 1620158 09AM
widia.com
K10F K10F-DCFD
Hole Finishing
HSR™ Solid Carbide Reaming Tools
HSR Reamers with Straight Flutes for Blind Holes • K10F
™
/K10F-DCFD
™
• 2–4mm
grade K10F
uncoated
order # catalogue #
grade K10F-DCFD
TiAlN
order # catalogue # D1 D L L4 L10 LS Z
2446025 050222-000200 2446371 450222-000200 2,00 3,00 48 15 6 28 4
2446029 050222-000300 2446372 450222-000300 3,00 3,00 48 15 8 28 4
2446031 050222-000400 2446415 450222-000400 4,00 4,00 54 21 8 28 4
• Standard reamers listed are ground to achieve an H7 tolerance hole.
IT6 capability is available. Additional diameters and lengths made to order.
Hole Finishing
rst choice
alternate choice
WID_Master16_Holemaking_Holefinishing_W012_W013_Metric_REBRAND.indd 13 10/29/15 1:27 PM
W14
LViWID M 16 H l ki H l i hi W014 W015 M i REBRANDO b 16 20158 10AM
widia.com
Hole Finishing
HSR™ Solid Carbide Reaming Tools
K10F K10F-DCFD
Hole Finishing
• Standard reamers listed are ground to achieve an H7 tolerance hole.
IT6 capability is available. Additional diameters and lengths made to order.
grade K10F
uncoated
order # catalogue #
grade K10F-DCFD
TiAlN
order # catalogue # D1 D L L4 L10 LS Z
2437472 050270-000500 2441337 450270-000500 5,00 6,00 74 32 12 36 4
2437523 050270-000600 2441339 450270-000600 6,00 6,00 74 33 12 36 4
2437525 050270-000800 2441341 450270-000800 8,00 8,00 91 50 16 36 6
2437526 050270-001000 2441342 450270-001000 10,00 10,00 103 58 20 40 6
2437527 050270-001200 2441353 450270-001200 12,00 12,00 118 68 24 45 6
2437529 050270-001400 2441354 450270-001400 14,00 14,00 132 81 28 45 6
rst choice
alternate choice
HSR Reamers with Straight Flutes for Blind Holes • K10F
™
/K10F-DCFD
™
• 5–14mm
WID_Master16_Holemaking_Holefinishing_W014_W015_Metric_REBRAND.indd 14 10/29/15 1:27 PM
W15
LViWID M 16 H l ki H l fi i hi W014 W015 M i REBRANDO b 1620158 10AM
widia.com
Hole Finishing
HSR™ Carbide-Tipped Reaming Tools
HSR Reamers with Straight Flutes for Blind Holes • K10F
™
/K10F-DCFD
™
• 14–32mm
K10F K10F-DCFD
• Standard reamers listed are ground to achieve an H7 tolerance hole.
IT6 capability is available. Additional diameters and lengths made to order.
Hole Finishing
grade K10F
uncoated
order # catalogue #
grade K10F-DCFD
TiAlN
order # catalogue # D1 D L L4 L10 LS Z
3055655 050280-001400 3084512 450280-001400 14,00 16,00 145 90 9 48 6
3055656 050280-001600 3084526 450280-001600 16,00 20,00 157 100 9 50 6
3055657 050280-001800 3084528 450280-001800 18,00 20,00 171 114 9 50 6
3056095 050280-002000 3077292 450280-002000 20,00 20,00 200 143 9 50 6
3056096 050280-002200 3084529 450280-002200 22,00 20,00 210 153 11 50 6
3056097 050280-002400 3084530 450280-002400 24,00 20,00 210 153 11 50 6
3056098 050280-002500 3084531 450280-002500 25,00 20,00 210 153 11 50 6
3056099 050280-002600 3084532 450280-002600 26,00 25,00 240 177 11 56 8
3056100 050280-002800 3084593 450280-002800 28,00 25,00 240 177 11 56 8
3056102 050280-003000 3084594 450280-003000 30,00 25,00 270 207 11 56 8
3056273 050280-003200 3084595 450280-003200 32,00 25,00 270 207 11 56 8
rst choice
alternate choice
WID_Master16_Holemaking_Holefinishing_W014_W015_Metric_REBRAND.indd 15 10/29/15 1:27 PM
W16
LViWID M 16 H l ki H l i hi W016 W017 M i REBRANDO b 16 20158 10AM
widia.com
Hole Finishing
HSR™ Cermet-Tipped Reaming Tools
CERMETDCFD
Hole Finishing
• Standard reamers listed are ground to achieve an H7 tolerance hole.
IT6 capability is available. Additional diameters and lengths made to order.
grade CERMET-DCFD
TiAlN
order # catalogue # D1 D L L4 L10 LS Z
3888407 456680-001400 14,00 16,00 145 76 8 49 6
3888408 456680-001500 15,00 16,00 145 76 8 49 6
3888409 456680-001600 16,00 20,00 157 86 8 51 6
3888410 456680-001700 17,00 20,00 157 86 10 51 6
3888411 456680-001800 18,00 20,00 171 100 10 51 6
3888412 456680-001900 19,00 20,00 171 100 10 51 6
3888413 456680-002000 20,00 20,00 200 129 10 51 6
rst choice
alternate choice
HSR Reamers with Straight Flutes for Blind Holes • CERMET-DCFD
™
• 14–20mm
WID_Master16_Holemaking_Holefinishing_W016_W017_Metric_REBRAND.indd 16 10/29/15 1:27 PM
W17
LViWID M 16 H l ki H l fi i hi W016 W017 M i REBRANDO b 1620158 10AM
widia.com
Hole Finishing
HSR™ Application Data • Series 050221
Hole Finishing
Series 050221 • Solid Carbide • Helical Flute • Grade K10
™
• Metric
Material
Group
Cutting Speed — vc Recommended Feed Rate per Rev
Range — m/min
min max
Tool
Diameter 1,40–3,15 3,16–4,80 4,81–7,15 7,16–9,59 9,60–12,70
P
1
20 – 30 mm/r 0,07–0,13 0,08–0,16 0,10–0,20 0,13–0,23 0,15–0,25
2
20 – 20 mm/r 0,07–0,13 0,08–0,16 0,10–0,20 0,13–0,23 0,15–0,25
3
10 – 20 mm/r 0,07–0,13 0,08–0,16 0,10–0,20 0,13–0,23 0,15–0,25
4
10 – 10 mm/r 0,07–0,13 0,08–0,16 0,10–0,20 0,13–0,23 0,15–0,25
5
10 – 10 mm/r 0,07–0,13 0,08–0,16 0,10–0,20 0,13–0,23 0,15–0,25
6
10 – 10 mm/r 0,06–0,10 0,07–0,13 0,08–0,16 0,10–0,20 0,13–0,23
M
1
10 – 10 mm/r 0,07–0,13 0,08–0,16 0,10–0,20 0,13–0,23 0,15–0,25
2
10 – 10 mm/r 0,07–0,13 0,08–0,16 0,10–0,20 0,13–0,23 0,15–0,25
3
10 – 10 mm/r 0,07–0,13 0,08–0,16 0,10–0,20 0,13–0,23 0,15–0,25
K
1
10 – 20 mm/r 0,10–0,20 0,15–0,30 0,20–0,30 0,20–0,40 0,25–0,45
2
10 – 20 mm/r 0,10–0,20 0,15–0,30 0,20–0,30 0,20–0,40 0,25–0,45
3
10 – 20 mm/r 0,10–0,20 0,15–0,30 0,20–0,30 0,20–0,40 0,25–0,45
N
1
30 – 30 mm/r 0,10–0,20 0,15–0,30 0,20–0,30 0,20–0,40 0,25–0,45
2
30 – 40 mm/r 0,10–0,20 0,15–0,30 0,20–0,30 0,20–0,40 0,25–0,45
3
30 – 40 mm/r 0,10–0,20 0,15–0,30 0,20–0,30 0,20–0,40 0,25–0,45
4
30 – 30 mm/r 0,10–0,20 0,15–0,30 0,20–0,30 0,20–0,40 0,25–0,45
5
20 – 30 mm/r 0,10–0,20 0,15–0,30 0,20–0,30 0,20–0,40 0,25–0,45
6
30 – 40 mm/r 0,10–0,20 0,15–0,30 0,20–0,30 0,20–0,40 0,25–0,45
S
1
10 – 10 mm/r 0,07–0,13 0,08–0,16 0,10–0,20 0,13–0,23 0,15–0,25
2
10 – 10 mm/r 0,07–0,13 0,08–0,16 0,10–0,20 0,13–0,23 0,15–0,25
3
10 – 20 mm/r 0,07–0,13 0,08–0,16 0,10–0,20 0,13–0,23 0,15–0,25
4
10 – 20 mm/r 0,07–0,13 0,08–0,16 0,10–0,20 0,13–0,23 0,15–0,25
WID_Master16_Holemaking_Holefinishing_W016_W017_Metric_REBRAND.indd 17 10/29/15 1:27 PM
W18
LViWID M 16 H l ki H l i hi W018 W019 M i REBRANDO b 16 20158 11AM
widia.com
Hole Finishing
HSR™ Application Data • Series 050227
Hole Finishing
Series 050227 • Solid Carbide • Helical Flute • Grade K10F
™
• Metric
Material
Group
Cutting Speed — vc Recommended Feed Rate per Rev
Range — m/min
min max
Tool
Diameter 1,40–3,15 3,16–4,80 4,81–7,15 7,16–9,59 9,60–12,70 12,70–15,00
P
1
30 – 40 mm/r 0,20–0,30 0,20–0,40 0,30–0,50 0,40–0,70 0,40–0,80 0,50–0,90
2
30 – 40 mm/r 0,20–0,30 0,20–0,40 0,30–0,50 0,40–0,70 0,40–0,80 0,50–0,90
3
30 – 30 mm/r 0,20–0,30 0,20–0,40 0,30–0,50 0,40–0,70 0,40–0,80 0,50–0,90
4
20 – 30 mm/r 0,20–0,30 0,20–0,40 0,30–0,50 0,40–0,70 0,40–0,80 0,50–0,90
5
10 – 20 mm/r 0,20–0,30 0,20–0,40 0,30–0,50 0,40–0,70 0,40–0,80 0,50–0,90
6
10 – 20 mm/r 0,15–0,30 0,20–0,30 0,20–0,40 0,30–0,50 0,30–0,60 0,35–0,65
M
1
10 – 20 mm/r 0,15–0,30 0,20–0,30 0,20–0,40 0,30–0,50 0,30–0,60 0,35–0,65
2
10 – 20 mm/r 0,15–0,30 0,20–0,30 0,20–0,40 0,30–0,50 0,30–0,60 0,35–0,65
3
10 – 10 mm/r 0,15–0,30 0,20–0,30 0,20–0,40 0,30–0,50 0,30–0,60 0,35–0,65
K
1
20 – 30 mm/r 0,25–0,45 0,35–0,65 0,40–0,80 0,50–0,90 0,60–1,05 0,60–1,20
2
20 – 30 mm/r 0,25–0,45 0,35–0,65 0,40–0,80 0,50–0,90 0,60–1,05 0,60–1,20
3
20 – 30 mm/r 0,25–0,45 0,35–0,65 0,40–0,80 0,50–0,90 0,60–1,05 0,60–1,20
N
1
70 – 90 mm/r 0,25–0,45 0,35–0,65 0,40–0,80 0,50–0,90 0,60–1,05 0,60–1,20
2
80 – 100 mm/r 0,25–0,45 0,35–0,65 0,40–0,80 0,50–0,90 0,60–1,05 0,60–1,20
3
80 – 100 mm/r 0,25–0,45 0,35–0,65 0,40–0,80 0,50–0,90 0,60–1,05 0,60–1,20
4
70 – 90 mm/r 0,25–0,45 0,35–0,65 0,40–0,80 0,50–0,90 0,60–1,05 0,60–1,20
5
60 – 80 mm/r 0,25–0,45 0,35–0,65 0,40–0,80 0,50–0,90 0,60–1,05 0,60–1,20
6
90 – 110 mm/r 0,25–0,45 0,35–0,65 0,40–0,80 0,50–0,90 0,60–1,05 0,60–1,20
S
1
10 – 20 mm/r 0,10–0,20 0,15–0,30 0,20–0,30 0,20–0,40 0,25–0,45 0,30–0,50
2
10 – 10 mm/r 0,10–0,20 0,15–0,30 0,20–0,30 0,20–0,40 0,25–0,45 0,30–0,50
3
20 – 30 mm/r 0,15–0,30 0,20–0,30 0,20–0,40 0,30–0,50 0,30–0,60 0,35–0,65
4
20 – 30 mm/r 0,15–0,30 0,20–0,30 0,20–0,40 0,30–0,50 0,30–0,60 0,35–0,65
WID_Master16_Holemaking_Holefinishing_W018_W019_Metric_REBRAND.indd 18 10/29/15 1:27 PM
W19
LViWID M 16 H l ki H l fi i hi W018 W019 M i REBRANDO b 1620158 11AM
widia.com
Hole Finishing
HSR™ Application Data • Series 450227
Hole Finishing
Series 450227 • Solid Carbide • Helical Flute • Grade K10F-DCFD
™
• Metric
Material
Group
Cutting Speed — vc Recommended Feed Rate per Rev
Range — m/min
min max
Tool
Diameter 1,40–3,15 3,16–4,80 4,81–7,15 7,16–9,59 9,60–12,70 12,70–15,00
P
1
60 – 80 mm/r 0,20–0,30 0,20–0,40 0,30–0,50 0,40–0,70 0,40–0,80 0,50–0,90
2
60 – 80 mm/r 0,20–0,30 0,20–0,40 0,30–0,50 0,40–0,70 0,40–0,80 0,50–0,90
3
60 – 70 mm/r 0,20–0,30 0,20–0,40 0,30–0,50 0,40–0,70 0,40–0,80 0,50–0,90
4
40 – 60 mm/r 0,20–0,30 0,20–0,40 0,30–0,50 0,40–0,70 0,40–0,80 0,50–0,90
5
20 – 30 mm/r 0,20–0,30 0,20–0,40 0,30–0,50 0,40–0,70 0,40–0,80 0,50–0,90
6
20 – 30 mm/r 0,15–0,30 0,20–0,30 0,20–0,40 0,30–0,50 0,30–0,60 0,35–0,65
M
1
10 – 20 mm/r 0,15–0,30 0,20–0,30 0,20–0,40 0,30–0,50 0,30–0,60 0,35–0,65
2
10 – 20 mm/r 0,15–0,30 0,20–0,30 0,20–0,40 0,30–0,50 0,30–0,60 0,35–0,65
3
10 – 20 mm/r 0,15–0,30 0,20–0,30 0,20–0,40 0,30–0,50 0,30–0,60 0,35–0,65
K
1
50 – 70 mm/r 0,25–0,45 0,35–0,65 0,40–0,80 0,50–0,90 0,60–1,05 0,60–1,20
2
50 – 70 mm/r 0,25–0,45 0,35–0,65 0,40–0,80 0,50–0,90 0,60–1,05 0,60–1,20
3
50 – 70 mm/r 0,25–0,45 0,35–0,65 0,40–0,80 0,50–0,90 0,60–1,05 0,60–1,20
S1
10 – 20 mm/r 0,10–0,20 0,15–0,30 0,20–0,30 0,20–0,40 0,25–0,45 0,30–0,50
2
10 – 20 mm/r 0,10–0,20 0,15–0,30 0,20–0,30 0,20–0,40 0,25–0,45 0,30–0,50
WID_Master16_Holemaking_Holefinishing_W018_W019_Metric_REBRAND.indd 19 10/29/15 1:27 PM
W20
LViWID M 16 H l ki H l i hi W020 W021 M i REBRANDO b 16 20158 11AM
widia.com
Hole Finishing
HSR™ Application Data • Series 050271
Hole Finishing
Series 050271 • Solid Carbide • Helical Flute • Grade K10F
™
• Metric
Material
Group
Cutting Speed — vc Recommended Feed Rate per Rev
Range — m/min
min max
Tool
Diameter 3,16–4,80 4,81–7,15 7,16–9,59 9,60–12,70 12,70–15,00
P
1
50 – 70 mm/r 0,20–0,40 0,30–0,50 0,35–0,65 0,40–0,80 0,50–0,90
2
40 – 60 mm/r 0,20–0,40 0,30–0,50 0,35–0,65 0,40–0,80 0,50–0,90
3
40 – 60 mm/r 0,20–0,40 0,30–0,50 0,35–0,65 0,40–0,80 0,50–0,90
4
30 – 40 mm/r 0,20–0,40 0,30–0,50 0,35–0,65 0,40–0,80 0,50–0,90
5
20 – 30 mm/r 0,20–0,40 0,30–0,50 0,35–0,65 0,40–0,80 0,50–0,90
6
10 – 20 mm/r 0,20–0,30 0,20–0,40 0,30–0,50 0,30–0,60 0,35–0,65
M
1
10 – 20 mm/r 0,20–0,30 0,20–0,40 0,30–0,50 0,30–0,60 0,35–0,65
2
10 – 20 mm/r 0,20–0,30 0,20–0,40 0,30–0,50 0,30–0,60 0,35–0,65
3
10 – 20 mm/r 0,20–0,30 0,20–0,40 0,30–0,50 0,30–0,60 0,35–0,65
K
1
30 – 50 mm/r 0,35–0,65 0,40–0,80 0,50–0,90 0,60–1,05 0,60–1,20
2
30 – 50 mm/r 0,35–0,65 0,40–0,80 0,50–0,90 0,60–1,05 0,60–1,20
3
30 – 50 mm/r 0,35–0,65 0,40–0,80 0,50–0,90 0,60–1,05 0,60–1,20
N
1
130 – 150 mm/r 0,35–0,65 0,40–0,80 0,50–0,90 0,60–1,05 0,60–1,20
2
140 – 160 mm/r 0,35–0,65 0,40–0,80 0,50–0,90 0,60–1,05 0,60–1,20
3
140 – 160 mm/r 0,35–0,65 0,40–0,80 0,50–0,90 0,60–1,05 0,60–1,20
4
130 – 150 mm/r 0,35–0,65 0,40–0,80 0,50–0,90 0,60–1,05 0,60–1,20
5
120 – 140 mm/r 0,35–0,65 0,40–0,80 0,50–0,90 0,60–1,05 0,60–1,20
6
150 – 170 mm/r 0,35–0,65 0,40–0,80 0,50–0,90 0,60–1,05 0,60–1,20
S
1
10 – 20 mm/r 0,15–0,30 0,20–0,30 0,20–0,40 0,25–0,45 0,30–0,50
2
10 – 20 mm/r 0,15–0,30 0,20–0,30 0,20–0,40 0,25–0,45 0,30–0,50
3
30 – 40 mm/r 0,20–0,30 0,20–0,40 0,30–0,50 0,30–0,60 0,35–0,65
4
30 – 40 mm/r 0,20–0,30 0,20–0,40 0,30–0,50 0,30–0,60 0,35–0,65
WID_Master16_Holemaking_Holefinishing_W020_W021_Metric_REBRAND.indd 20 10/29/15 1:27 PM
W21
LViWID M 16 H l ki H l fi i hi W020 W021 M i REBRANDO b 1620158 11AM
widia.com
Hole Finishing
HSR™ Application Data • Series 450271
Hole Finishing
Series 450271 • Solid Carbide • Helical Flute • Grade K10F-DCFD
™
• Metric
Material
Group
Cutting Speed — vc Recommended Feed Rate per Rev
Range — m/min
min max
Tool
Diameter 3,16–4,80 4,81–7,15 7,16–9,59 9,60–12,70 12,70–15,00
P
1
110 – 130 mm/r 0,20–0,40 0,30–0,50 0,35–0,65 0,40–0,80 0,50–0,90
2
110 – 130 mm/r 0,20–0,40 0,30–0,50 0,35–0,65 0,40–0,80 0,50–0,90
3
100 – 120 mm/r 0,20–0,40 0,30–0,50 0,35–0,65 0,40–0,80 0,50–0,90
4
60 – 80 mm/r 0,20–0,40 0,30–0,50 0,35–0,65 0,40–0,80 0,50–0,90
5
30 – 50 mm/r 0,20–0,40 0,30–0,50 0,35–0,65 0,40–0,80 0,50–0,90
6
30 – 40 mm/r 0,20–0,30 0,20–0,40 0,30–0,50 0,30–0,60 0,35–0,65
M
1
30 – 40 mm/r 0,20–0,30 0,20–0,40 0,30–0,50 0,30–0,60 0,35–0,65
2
30 – 40 mm/r 0,20–0,30 0,20–0,40 0,30–0,50 0,30–0,60 0,35–0,65
3
20 – 30 mm/r 0,20–0,30 0,20–0,40 0,30–0,50 0,30–0,60 0,35–0,65
K
1
80 – 100 mm/r 0,35–0,65 0,40–0,80 0,50–0,90 0,60–1,05 0,60–1,20
2
80 – 100 mm/r 0,35–0,65 0,40–0,80 0,50–0,90 0,60–1,05 0,60–1,20
3
70 – 90 mm/r 0,35–0,65 0,40–0,80 0,50–0,90 0,60–1,05 0,60–1,20
S1
30 – 40 mm/r 0,15–0,30 0,20–0,30 0,20–0,40 0,25–0,45 0,30–0,50
2
20 – 30 mm/r 0,15–0,30 0,20–0,30 0,20–0,40 0,25–0,45 0,30–0,50
WID_Master16_Holemaking_Holefinishing_W020_W021_Metric_REBRAND.indd 21 10/29/15 1:27 PM
W22
LViWID M 16 H l ki H l i hi W022 W023 M i REBRANDO b 16 20158 12AM
widia.com
Hole Finishing
HSR™ Application Data • Series 050281
Hole Finishing
Series 050281 • Uncoated • Carbide-Tipped • Helical Flute • Grade K10F
™
• Metric
Material
Group
Cutting Speed — vc Recommended Feed Rate per Rev
Range — m/min
min max
Tool
Diameter 12,70–15,00 15,00–20,00 20,00–32,00
P
1
50 – 70 mm/r 0,50–0,90 0,60–1,05 0,60–1,10
2
40 – 60 mm/r 0,50–0,90 0,60–1,05 0,60–1,10
3
40 – 60 mm/r 0,50–0,90 0,60–1,05 0,60–1,10
4
30 – 40 mm/r 0,50–0,90 0,60–1,05 0,60–1,10
5
20 – 30 mm/r 0,50–0,90 0,60–1,05 0,60–1,10
6
10 – 20 mm/r 0,35–0,65 0,40–0,80 0,50–0,90
M
1
10 – 20 mm/r 0,35–0,65 0,40–0,80 0,50–0,90
2
10 – 20 mm/r 0,35–0,65 0,40–0,80 0,50–0,90
3
10 – 20 mm/r 0,35–0,65 0,40–0,80 0,50–0,90
K
1
30 – 50 mm/r 0,60–1,20 0,70–1,30 0,80–1,40
2
30 – 50 mm/r 0,60–1,20 0,70–1,30 0,80–1,40
3
30 – 40 mm/r 0,60–1,20 0,70–1,30 0,80–1,40
N
1
130 – 150 mm/r 0,60–1,20 0,70–1,30 0,80–1,40
2
140 – 160 mm/r 0,60–1,20 0,70–1,30 0,80–1,40
3
140 – 160 mm/r 0,60–1,20 0,70–1,30 0,80–1,40
4
130 – 150 mm/r 0,60–1,20 0,70–1,30 0,80–1,40
5
120 – 140 mm/r 0,60–1,20 0,70–1,30 0,80–1,40
6
150 – 170 mm/r 0,60–1,20 0,70–1,30 0,80–1,40
S
1
10 – 20 mm/r 0,30–0,50 0,30–0,60 0,35–0,65
2
10 – 20 mm/r 0,30–0,50 0,30–0,60 0,35–0,65
3
30 – 40 mm/r 0,35–0,65 0,40–0,80 0,50–0,90
4
30 – 40 mm/r 0,35–0,65 0,40–0,80 0,50–0,90
WID_Master16_Holemaking_Holefinishing_W022_W023_Metric_REBRAND.indd 22 10/29/15 1:27 PM
W23
LViWID M 16 H l ki H l fi i hi W022 W023 M i REBRANDO b 1620158 12AM
widia.com
Hole Finishing
HSR™ Application Data • Series 450281
Hole Finishing
Series 450281 • Coated • Carbide-Tipped • Helical Flute • Grade K10F-DCFD
™
• Metric
Material
Group
Cutting Speed — vc Recommended Feed Rate per Rev
Range — m/min
min max
Tool
Diameter 12,70–15,00 15,00–20,00 20,00–32,00
P
1
110 – 130 mm/r 0,50–0,90 0,60–1,05 0,60–1,10
2
110 – 130 mm/r 0,50–0,90 0,60–1,05 0,60–1,10
3
100 – 120 mm/r 0,50–0,90 0,60–1,05 0,60–1,10
4
60 – 80 mm/r 0,50–0,90 0,60–1,05 0,60–1,10
5
30 – 50 mm/r 0,50–0,90 0,60–1,05 0,60–1,10
6
30 – 40 mm/r 0,35–0,65 0,40–0,80 0,50–0,90
M
1
30 – 40 mm/r 0,35–0,65 0,40–0,80 0,50–0,90
2
30 – 40 mm/r 0,35–0,65 0,40–0,80 0,50–0,90
3
20 – 30 mm/r 0,35–0,65 0,40–0,80 0,50–0,90
K
1
80 – 100 mm/r 0,60–1,20 0,70–1,30 0,80–1,40
2
80 – 100 mm/r 0,60–1,20 0,70–1,30 0,80–1,40
3
70 – 90 mm/r 0,60–1,20 0,70–1,30 0,80–1,40
S1
30 – 40 mm/r 0,30–0,50 0,30–0,60 0,35–0,65
2
20 – 30 mm/r 0,30–0,50 0,30–0,60 0,35–0,65
WID_Master16_Holemaking_Holefinishing_W022_W023_Metric_REBRAND.indd 23 10/29/15 1:27 PM
W24
LViWID M 16 H l ki H l i hi W024 W025 M i REBRANDO b 16 20158 12AM
widia.com
Hole Finishing
HSR™ Application Data • Series 456681
Hole Finishing
Series 456681 • Cermet-Tipped • Helical Flute • Grade CERMET-DCFD
™
• Metric
Material
Group
Cutting Speed — vc Recommended Feed Rate per Rev
Range — m/min
min max
Tool
Diameter 12,70–15,00 15,00–20,00
P
1
110 – 130 mm/r 0,50–0,90 0,60–1,05
2
110 – 130 mm/r 0,50–0,90 0,60–1,05
3
100 – 120 mm/r 0,50–0,90 0,60–1,05
4
60 – 80 mm/r 0,50–0,90 0,60–1,05
5
30 – 50 mm/r 0,50–0,90 0,60–1,05
6
30 – 40 mm/r 0,35–0,65 0,40–0,80
WID_Master16_Holemaking_Holefinishing_W024_W025_Metric_REBRAND.indd 24 10/29/15 1:27 PM
W25
LViWID M 16 H l ki H l fi i hi W024 W025 M i REBRANDO b 1620158 12AM
widia.com
Hole Finishing
HSR™ Application Data • Series 050222
Hole Finishing
Series 050222 • Solid Carbide • Straight Flute • Grade K10F
™
• Metric
Material
Group
Cutting Speed — vc Recommended Feed Rate per Rev
Range — m/min
min max
Tool
Diameter 1,40–3,15 3,16–4,80
P
1
30 – 40 mm/r 0,20–0,30 0,20–0,40
2
30 – 40 mm/r 0,20–0,30 0,20–0,40
3
30 – 30 mm/r 0,20–0,30 0,20–0,40
4
20 – 30 mm/r 0,20–0,30 0,20–0,40
5
10 – 20 mm/r 0,20–0,30 0,20–0,40
6
10 – 20 mm/r 0,15-0,30 0,20-0,30
M
1
10 – 20 mm/r 0,15–0,30 0,20–0,30
2
10 – 20 mm/r 0,15–0,30 0,20–0,30
3
10 – 10 mm/r 0,15–0,30 0,20–0,30
K
1
20 – 30 mm/r 0,25–0,45 0,35–0,65
2
20 – 30 mm/r 0,25–0,45 0,35–0,65
3
20 – 30 mm/r 0,25–0,45 0,35–0,65
N
1
70 – 90 mm/r 0,25–0,45 0,35–0,65
2
80 – 100 mm/r 0,25–0,45 0,35–0,65
3
80 – 100 mm/r 0,25–0,45 0,35–0,65
4
70 – 90 mm/r 0,25–0,45 0,35–0,65
5
60 – 80 mm/r 0,25–0,45 0,35–0,65
6
90 – 110 mm/r 0,25-0,45 0,35-0,65
S
1
10 – 20 mm/r 0,10–0,20 0,15–0,30
2
10 – 10 mm/r 0,10–0,20 0,15–0,30
3
20 – 30 mm/r 0,15–0,30 0,20–0,30
4
20 – 30 mm/r 0,15-0,30 0,20-0,30
WID_Master16_Holemaking_Holefinishing_W024_W025_Metric_REBRAND.indd 25 10/29/15 1:27 PM
W26
LViWID M 16 H l ki H l i hi W026 W027 M i REBRANDO b 16 20158 13AM
widia.com
Hole Finishing
HSR™ Application Data • Series 450222
Hole Finishing
Series 450222 • Solid Carbide • Straight Flute • Grade K10F-DCFD
™
• Metric
Material
Group
Cutting Speed — vc Recommended Feed Rate per Rev
Range — m/min
min max
Tool
Diameter 1,40–3,15 3,16–4,80
P
1
60 – 80 mm/r 0,20–0,30 0,20–0,40
2
60 – 80 mm/r 0,20–0,30 0,20–0,40
3
50 – 70 mm/r 0,20–0,30 0,20–0,40
4
40 – 60 mm/r 0,20–0,30 0,20–0,40
5
20 – 30 mm/r 0,20–0,30 0,20–0,40
6
20 – 30 mm/r 0,15–0,30 0,20–0,30
M
1
10 – 20 mm/r 0,15–0,30 0,20–0,30
2
10 – 20 mm/r 0,15–0,30 0,20–0,30
3
10 – 20 mm/r 0,15–0,30 0,20–0,30
K
1
50 – 70 mm/r 0,25–0,45 0,35–0,65
2
50 – 70 mm/r 0,25–0,45 0,35–0,65
3
50 – 70 mm/r 0,25–0,45 0,35–0,65
S1
10 – 20 mm/r 0,10–0,20 0,15–0,30
2
10 – 20 mm/r 0,10–0,20 0,15–0,30
WID_Master16_Holemaking_Holefinishing_W026_W027_Metric_REBRAND.indd 26 10/29/15 1:27 PM
W27
LViWID M 16 H l ki H l fi i hi W026 W027 M i REBRANDO b 1620158 13AM
widia.com
Hole Finishing
HSR™ Application Data • Series 050270
Series 050270 • Solid Carbide • Straight Flute • Grade K10F
™
• Metric
Material
Group
Cutting Speed — vc Recommended Feed Rate per Rev
Range — m/min
min max
Tool
Diameter 3,16–4,80 4,81–7,15 7,16–9,59 9,60–12,70 12,70–15,00
P
1
50 – 70 mm/r 0,20–0,40 0,30–0,50 0,35–0,65 0,40–0,80 0,50–0,90
2
40 – 60 mm/r 0,20–0,40 0,30–0,50 0,35–0,65 0,40–0,80 0,50–0,90
3
40 – 60 mm/r 0,20–0,40 0,30–0,50 0,35–0,65 0,40–0,80 0,50–0,90
4
30 – 40 mm/r 0,20–0,40 0,30–0,50 0,35–0,65 0,40–0,80 0,50–0,90
5
20 – 30 mm/r 0,20–0,40 0,30–0,50 0,35–0,65 0,40–0,80 0,50–0,90
6
10 – 20 mm/r 0,20–0,30 0,20–0,40 0,30–0,50 0,30–0,60 0,35–0,65
M
1
10 – 20 mm/r 0,20–0,30 0,20–0,40 0,30–0,50 0,30–0,60 0,35–0,65
2
10 – 20 mm/r 0,20–0,30 0,20–0,40 0,30–0,50 0,30–0,60 0,35–0,65
3
10 – 20 mm/r 0,20–0,30 0,20–0,40 0,30–0,50 0,30–0,60 0,35–0,65
K
1
30 – 50 mm/r 0,35–0,65 0,40–0,80 0,50–0,90 0,60–1,05 0,60–1,20
2
30 – 50 mm/r 0,35–0,65 0,40–0,80 0,50–0,90 0,60–1,05 0,60–1,20
3
30 – 50 mm/r 0,35–0,65 0,40–0,80 0,50–0,90 0,60–1,05 0,60–1,20
N
1
130 – 150 mm/r 0,35–0,65 0,40–0,80 0,50–0,90 0,60–1,05 0,60–1,20
2
140 – 160 mm/r 0,35–0,65 0,40–0,80 0,50–0,90 0,60–1,05 0,60–1,20
3
140 – 160 mm/r 0,35–0,65 0,40–0,80 0,50–0,90 0,60–1,05 0,60–1,20
4
130 – 150 mm/r 0,35–0,65 0,40–0,80 0,50–0,90 0,60–1,05 0,60–1,20
5
120 – 140 mm/r 0,35–0,65 0,40–0,80 0,50–0,90 0,60–1,05 0,60–1,20
6
150 – 170 mm/r 0,35–0,65 0,40–0,80 0,50–0,90 0,60–1,05 0,60–1,20
S
1
10 – 20 mm/r 0,15–0,30 0,20–0,30 0,20–0,40 0,25–0,45 0,30–0,50
2
10 – 20 mm/r 0,15–0,30 0,20–0,30 0,20–0,40 0,25–0,45 0,30–0,50
3
30 – 40 mm/r 0,20–0,30 0,20–0,40 0,30–0,50 0,30–0,60 0,35–0,65
4
30 – 40 mm/r 0,20–0,30 0,20–0,40 0,30–0,50 0,30–0,60 0,35–0,65
Hole Finishing
Series 450270 • Solid Carbide • Straight Flute • Grade K10F-DCFD
™
• Metric
Material
Group
Cutting Speed — vc Recommended Feed Rate per Rev
Range — m/min
min max
Tool
Diameter 3,16–4,80 4,81–7,15 7,16–9,59 9,60–12,70 12,70–15,00
P
1
110 – 130 mm/r 0,20–0,40 0,30–0,50 0,35–0,65 0,40–0,80 0,50–0,90
2
110 – 130 mm/r 0,20–0,40 0,30–0,50 0,35–0,65 0,40–0,80 0,50–0,90
3
100 – 120 mm/r 0,20–0,40 0,30–0,50 0,35–0,65 0,40–0,80 0,50–0,90
4
60 – 80 mm/r 0,20–0,40 0,30–0,50 0,35–0,65 0,40–0,80 0,50–0,90
5
30 – 50 mm/r 0,20–0,40 0,30–0,50 0,35–0,65 0,40–0,80 0,50–0,90
6
30 – 40 mm/r 0,20–0,30 0,20–0,40 0,30–0,50 0,30–0,60 0,35–0,65
M
1
30 – 40 mm/r 0,20–0,30 0,20–0,40 0,30–0,50 0,30–0,60 0,35–0,65
2
30 – 40 mm/r 0,20–0,30 0,20–0,40 0,30–0,50 0,30–0,60 0,35–0,65
3
20 – 30 mm/r 0,20–0,30 0,20–0,40 0,30–0,50 0,30–0,60 0,35–0,65
K
1
80 – 100 mm/r 0,35–0,65 0,40–0,80 0,50–0,90 0,60–1,05 0,60–1,20
2
80 – 100 mm/r 0,35–0,65 0,40–0,80 0,50–0,90 0,60–1,05 0,60–1,20
3
70 – 90 mm/r 0,35–0,65 0,40–0,80 0,50–0,90 0,60–1,05 0,60–1,20
S1
30 – 40 mm/r 0,15–0,30 0,20–0,30 0,20–0,40 0,25–0,45 0,30–0,50
2
20 – 30 mm/r 0,15–0,30 0,20–0,30 0,20–0,40 0,25–0,45 0,30–0,50
HSR™ Application Data • Series 450270
WID_Master16_Holemaking_Holefinishing_W026_W027_Metric_REBRAND.indd 27 10/29/15 1:28 PM
W28
LViWID M 16 H l ki H l i hi W028 W029 M i REBRANDO b 16 20158 13AM
widia.com
Hole Finishing
HSR™ Application Data • Series 050280
Hole Finishing
Series 050280 • Uncoated • Carbide-Tipped • Straight Flute • Grade K10F
™
• Metric
Material
Group
Cutting Speed — vc Recommended Feed Rate per Rev
Range — m/min
min max
Tool
Diameter 12,70–15,00 15,00–20,00 20,00–32,00
P
1
50 – 70 mm/r 0,50–0,90 0,60–1,05 0,60–1,20
2
40 – 60 mm/r 0,50–0,90 0,60–1,05 0,60–1,20
3
40 – 60 mm/r 0,50–0,90 0,60–1,05 0,60–1,20
4
30 – 40 mm/r 0,50–0,90 0,60–1,05 0,60–1,20
5
20 – 30 mm/r 0,50–0,90 0,60–1,05 0,60–1,20
6
10 – 20 mm/r 0,35–0,65 0,40–0,80 0,50–0,90
M
1
10 – 20 mm/r 0,35–0,65 0,40–0,80 0,50–0,90
2
10 – 20 mm/r 0,35–0,65 0,40–0,80 0,50–0,90
3
10 – 20 mm/r 0,35–0,65 0,40–0,80 0,50–0,90
K
1
30 – 50 mm/r 0,60–1,20 0,70–1,30 0,80–1,40
2
30 – 50 mm/r 0,60–1,20 0,70–1,30 0,80–1,40
3
30 – 40 mm/r 0,60–1,20 0,70–1,30 0,80–1,40
N
1
130 – 150 mm/r 0,60–1,20 0,70–1,30 0,80–1,40
2
140 – 160 mm/r 0,60–1,20 0,70–1,30 0,80–1,40
3
140 – 160 mm/r 0,60–1,20 0,70–1,30 0,80–1,40
4
130 – 150 mm/r 0,60–1,20 0,70–1,30 0,80–1,40
5
120 – 140 mm/r 0,60–1,20 0,70–1,30 0,80–1,40
6
150 – 170 mm/r 0,60–1,20 0,70–1,30 0,80–1,40
S
1
10 – 20 mm/r 0,30–0,50 0,30–0,60 0,35–0,65
2
10 – 20 mm/r 0,30–0,50 0,30–0,60 0,35–0,65
3
30 – 40 mm/r 0,35–0,65 0,40–0,80 0,50–0,90
4
30 – 40 mm/r 0,35–0,65 0,40–0,80 0,50–0,90
WID_Master16_Holemaking_Holefinishing_W028_W029_Metric_REBRAND.indd 28 10/29/15 1:28 PM
W29
LViWID M 16 H l ki H l fi i hi W028 W029 M i REBRANDO b 1620158 13AM
widia.com
Hole Finishing
HSR™ Application Data • Series 450280
Hole Finishing
Series 450280 • Coated • Carbide-Tipped • Straight Flute • Grade K10F-DCFD
™
• Metric
Material
Group
Cutting Speed — vc Recommended Feed Rate per Rev
Range — m/min
min max
Tool
Diameter 12,70–15,00 15,00–20,00 20,00–32,00
P
1
110 – 130 mm/r 0,50–0,90 0,60–1,05 0,60–1,10
2
110 – 130 mm/r 0,50–0,90 0,60–1,05 0,60–1,10
3
100 – 120 mm/r 0,50–0,90 0,60–1,05 0,60–1,10
4
60 – 80 mm/r 0,50–0,90 0,60–1,05 0,60–1,10
5
30 – 50 mm/r 0,50–0,90 0,60–1,05 0,60–1,10
6
30 – 40 mm/r 0,35-0,65 0,40-0,80 0,50-0,90
M
1
30 – 40 mm/r 0,35–0,65 0,40–0,80 0,50–0,90
2
30 – 40 mm/r 0,35–0,65 0,40–0,80 0,50–0,90
3
20 – 30 mm/r 0,35–0,65 0,40–0,80 0,50–0,90
K
1
80 – 100 mm/r 0,60–1,20 0,70–1,30 0,80–1,40
2
80 – 100 mm/r 0,60–1,20 0,70–1,30 0,80–1,40
3
70 – 90 mm/r 0,60–1,20 0,70–1,30 0,80–1,40
S1
30 – 40 mm/r 0,30–0,50 0,30–0,60 0,35–0,65
2
20 – 30 mm/r 0,30-0,50 0,30-0,60 0,35-0,65
Series 456680 • Cermet-Tipped • Straight Flute • Grade CERMET-DCFD
™
• Metric
Material
Group
Cutting Speed — vc Recommended Feed Rate per Rev
Range — m/min
min max
Tool
Diameter 12,70–15,00 15,00–20,00
P
1
110 – 130 mm/r 0,50–0,90 0,60–1,05
2
110 – 130 mm/r 0,50–0,90 0,60–1,05
3
100 – 120 mm/r 0,50–0,90 0,60–1,05
4
60 – 80 mm/r 0,50–0,90 0,60–1,05
5
30 – 50 mm/r 0,50–0,90 0,60–1,05
6
30 – 40 mm/r 0,35–0,65 0,40–0,80
HSR™ Application Data • Series 456680
WID_Master16_Holemaking_Holefinishing_W028_W029_Metric_REBRAND.indd 29 10/29/15 1:28 PM
W30
LViWID M 16 H l ki H l i hi W030 W031 M i REBRANDO b 21 20152 52PM
widia.com
Features and Benefi ts
• High-speed and high-performance ready.
• Unique proprietary coupling system enables same
runout accuracy as monoblock systems (<3 microns).
• Comfortable radial clamping for quick exchanging even
in narrow situations in the machine.
• No fi xture for clamping or dismounting necessary.
Customisation
• Heads fully customisable as simple specials with
different lead geometries, grades, coatings,
and edge hones.
• Semi-fi nished heads on stock for shorter lead times.
Ordering Process
• Please contact your local Authorised Distributor
for a quote.
WIDIA™ TRM •
Top Ream Modular (Available as Semi-Standards)
WIDIA TRM
Primary Application
• Achieve solid carbide metal removal rates.
• Five sizes of standard straight shank bodies available to couple
reaming heads from 20–42mm (.787–1.653").
WID_Master16_Holemaking_Holefinishing_W030_W031_Metric_REBRAND.indd 30 10/29/15 1:28 PM
W31
LViWID M 16 H l ki H l fi i hi W030 W031 M i REBRANDO b 2120152 52PM
widia.com
WST™ — WIDIA™ Short Taper
•
Easy to handle.
• Fewer vibrations due to safe torque transmission.
• No head-to-body orientation adjustment necessary.
• Higher hole quality due to minimal runout and taper face
contact.
• Easy to disassemble due to push out effect of head.
Safe torque transmission
Taper face contact
)0,002 μm runout
Regular Tipped WIDIA Top Ream
• Min 4x reconditionable.
• New reaming grade WU05PR™ holds bore surface fi nish
more than 2x longer.
• Stronger brazing joint than conventional tipped reamers.
• Less infl uence of coating process on runout.
•
4–8 brazing joints depending on diameter (number of teeth).
• Less stiffness.
• More vibrations.
• Higher runout after thermal infl uence (e.g., coating,
reconditioning, etc.).
Special Design — Top Ream Tipped Tools
WID_Master16_Holemaking_Holefinishing_W030_W031_Metric_REBRAND.indd 31 10/29/15 1:28 PM
W32
LViWID M 16 H l ki H l i hi W032 W033 M i REBRANDN b 10 20151 54PM
widia.com
Problem
Reamer Troubleshooting
Cause Possible Remedy
1. Reaming tool running out of centre.
2. Concentricity of pilot hole and ream
machining unsatisfactory.
3. Built-up edge.
4. Unsuitable cooling lubricant.
5. Reaming tool diameter too large.
• Use equalising adaptor.
• Re-align, use oating head.
• Change cooling lubricant.
• Change cutting speed.
• Measure reamers and
send for repairs.
Hole diameter too large
Nom diameter
1. Reamer worn.
2. Unsuitable cooling lubricant.
3. Reaming allowance too small.
• Replace and re t tool.
• Change cooling lubricant.
• Increase reaming allowance.
Hole diameter too small
Nom diameter
1. Concentricity of pilot hole and
reaming unsatisfactory.
2. Positioning accuracy of pilot hole
to reaming.
• Re-align, use equalising adaptor.
• Correct positioning accuracy.
Conical hole pro le wider towards drill runout
Nom diameter
1. Concentricity of pilot hole and
reaming unsatisfactory.
2. Reaming tool skim cutting
with ledger.
• Re-align, use oating head.
• Securely clamp reaming tool axially.
Conical hole pro le wider at drill entry point
Nom diameter
Hole Finishing
Reamer Custom Solution Capabilities
(continued)
WID_Master16_Holemaking_Holefinishing_W032_W033_Metric_REBRAND.indd 32 11/10/15 2:21 PM
W33
LViWID M 16 H l ki H l fi i hi W032 W033 M i REBRANDN b 1020151 54PM
widia.com
1. Reaming tool running out of centre.
2. Slanted cutting surface/asymmetrical
cutting.
3. Workpiece twisted.
• Use equalising adaptor.
• Spot face as drilling preparation.
• Take the direction of impact
into account when clamping the
workpiece.
1. Tool cutters worn.
2. Reaming tool running out of centre.
3. Incorrect technology data
(cutting parameters).
4. Inadequate chip evacuation.
• Use equalising adaptor.
• Re-align, use oating head.
• Change cooling lubricant.
• Change cutting speed.
• Measure reamers and
send for repairs.
Surface quality does not meet speci cation
1. Built-up edge. • Change cooling lubricant.
• Change cutting speed.
Feed grooves
Conical hole pro le wider at drill entry point
Problem
Reamer Troubleshooting
Cause Possible Remedy
Hole Finishing
Reamer Custom Solution Capabilities
(continued)
WID_Master16_Holemaking_Holefinishing_W032_W033_Metric_REBRAND.indd 33 11/10/15 2:21 PM
W34
LViWID M 16 H l ki H l i hi W034 W035 M i REBRANDN b 12 201510 38AM
widia.com
The newly developed RFX coupling eases assembly
and disassembly and enhances stabililty
• Increased machine tool productivity and less vibration.
• Standard micro-adjustable cartridges for fi ne fi nishing operations.
• Internal coolant and spacious chip fl utes.
• Easy adjustments and low initial investment.
• Roughing and precision fi nishing heads available.
• For roughing and fi ne fi nishing operations over a broad diameter range.
ROTAFLEX
Precision Hole Finishing •
ROTAFLEX™
The WIDIA™ line of Precision Hole Finishing ensures decreased vibration,
increased productivity, and reduced calls for scheduled maintenance.
You can count on consistent hole diameters, high speed and feed rates,
and good surface quality at a great price.
WID_Master16_Holemaking_Holefinishing_W034_W035_Metric_REBRAND.indd 34 11/12/15 11:59 AM
Advanced system uses the progressive RFX coupling and
the latest technology WIDIA™ Victory™ ISO turning inserts
• High feed rates due to the proprietary front serration of the TCHS twin cutters.
• Internal coolant and spacious chip fl utes ensure secure chip evacuation.
• High-precision adjustment of FBH and FBHBB Fine-Boring Heads with the axial
and radial pre-loaded eccentric bushing instead of a threaded spindle.
• Higher rigidity with the new RFX bayonet-type coupling.
• Achieve unmatched tool life with WIDIA Victory grades.
WID_Master16_Holemaking_Holefinishing_W034_W035_Metric_REBRAND.indd 35 11/12/15 11:59 AM
W36
LViWID M 16 H l ki H l i hi W036 W037 M i REBRANDO b 16 20158 17AM
widia.com
Hole Finishing
ROTAFLEX™ High-Performance Boring Systems
catalogue number
fixing
screw
disc
washer
RFX185TCHS022030 12147602700 12147600100
RFX245TCHS030039 12147602300 12147603900
RFX320TCHS039050 12147602400 12147600200
RFX420TCHS050067 12147602500 12147604000
RFX550TCHS067088 12147602600 12147600300
RFX720TCHS088115 12147602800 12147600400
Spare Parts
TCHS • RFX Shank Series
order number catalogue number BR1 bore range L1
CSMS
system size kg
3861179 RFX185TCHS022030 22,500-30,000 27,7 RFX185 0,20
3861180 RFX245TCHS030039 30,000-39,000 37,7 RFX245 0,20
3861181 RFX320TCHS039050 39,000-50,000 48,7 RFX320 0,50
3861182 RFX420TCHS050067 50,000-67,000 68,2 RFX420 1,00
3861183 RFX550TCHS067088 67,000-88,000 90,7 RFX550 2,00
3861184 RFX720TCHS088115 88,000-115,000 113,7 RFX720 4,00
Hole Finishing
• Basic body shipped without insert holders.
• Order insert holder, slides, or micro-adjustable
cartridges separately.
L1 Assy = L1 Body + L1 Insert Holder
L1 Assy
WID_Master16_Holemaking_Holefinishing_W036_W037_Metric_REBRAND.indd 36 10/29/15 1:28 PM
W37
LViWID M 16 H l ki H l fi i hi W036 W037 M i REBRANDO b 1620158 17AM
widia.com
Hole Finishing
ROTAFLEX™ High-Performance Boring Systems
Spare Parts
TCHS • KM
™
Shank Series
order number catalogue number BR1 bore range L1
CSMS
system size kg
3861149 KM32TSTCHS022030 22,000-30,000 52,7 KM32TS 0,30
3861150 KM32TSTCHS030039 30,000-39,000 67,7 KM32TS 0,50
3861152 KM40TSTCHS030039 30,000-39,000 87,7 KM40TS 0,60
3861151 KM32TSTCHS039050 39,000-50,000 63,7 KM32TS 0,70
3861173 KM40TSTCHS039050 39,000-50,000 83,7 KM40TS 1,00
3861174 KM40TSTCHS050067 50,000-67,000 78,2 KM40TS 1,10
3861175 KM50TSTCHS050067 50,000-67,000 88,2 KM50TS 1,20
3861176 KM50TSTCHS067088 67,000-88,000 95,7 KM50TS 1,40
3861177 KM63TSTCHS067088 67,000-88,000 95,7 KM63TS 1,80
3861178 KM63TSTCHS088115 88,000-115,000 93,7 KM63TS 2,40
• Basic body shipped without insert holders.
• Order insert holder, slides, or micro-adjustable
cartridges separately.
catalogue number
fixing
screw
disc
washer
KM32TSTCHS022030 12147602700 12147600100
KM32TSTCHS030039 12147602300 12147603900
KM32TSTCHS039050 12147602400 12147600200
KM40TSTCHS030039 12147602300 12147603900
KM40TSTCHS039050 12147602400 12147600200
KM40TSTCHS050067 12147602500 12147604000
KM50TSTCHS050067 12147602500 12147604000
KM50TSTCHS067088 12147602600 12147600300
KM63TSTCHS067088 12147602600 12147600300
KM63TSTCHS088115 12147602800 12147600400
Hole Finishing
L1 Assy = L1 body + L1 insert holder
L1 Assy
WID_Master16_Holemaking_Holefinishing_W036_W037_Metric_REBRAND.indd 37 10/29/15 1:28 PM
W38
LViWID M 16 H l ki H l i hi W038 W039 M i REBRANDO b 16 20158 18AM
widia.com
Hole Finishing
Hole Finishing
ROTAFLEX™ High-Performance Boring Systems
Spare Parts
catalogue number
fixing
screw
fixing
screw
fixing
screw
disc
washer
disc
washer
12600208800 — 12346233000 12147519100 12147600300 —
12600210900 12147613500 — 12147519100 12147600300 12147740200
12600213200 12147613500 — 12147519100 12147600300 12147740200
12600215500 12147613500 — 12147519100 12147600300 12147740200
12600217800 12147613500 — 12147519100 12147600300 12147740200
Bridge Tool • Small
NOTE: Use of ISO cartridges SCLCL12CA12, STGCL12CA16, or SSRCL12CA12 is recommended.
order number catalogue number BR1 bore range D L1 kg
2006019 12600208800 87.000-110.000 27 40,3 1,70
2005500 12600210900 109.000-133.000 27 40,3 1,90
2005553 12600213200 132.000-156.000 27 40,3 2,10
2005556 12600215500 155.000-179.000 27 40,3 2,30
2005560 12600217800 178.000-202.000 27 40,3 2,50
L1 Assy = L1 bridge + L1 insert holder
L1 Assy = L1 bridge + L1 slide + L1 cartridge
L1 Assy
L1 Assy
• For use with shell mill adaptors; please order separately.
• Bridge body shipped without insert holder, slides, or micro-adjustable cartridges.
• Order insert holder separately for rough boring and slides for ne boring.
• Order micro-adjustable cartridges separately for ne boring.
(continued)
WID_Master16_Holemaking_Holefinishing_W038_W039_Metric_REBRAND.indd 38 10/29/15 1:28 PM
W39
LViWID M 16 H l ki H l fi i hi W038 W039 M i REBRANDO b 1620158 18AM
widia.com
Hole Finishing
Hole Finishing
ROTAFLEX™ High-Performance Boring Systems
Insert Holder Reference Chart
C-Style 70° C-Style 90° S-Style 80° T-Style 90°
12625906700 12625706700 12626006700 12625806800
Slide for Micro-Adjustable Cartridges
order number catalogue number L1
adjusting
screw
fixing
screw
hex
wrench
3864647 SMAC087 19,2 12147665000 12147519100 12148041100
(continued)
WID_Master16_Holemaking_Holefinishing_W038_W039_Metric_REBRAND.indd 39 10/29/15 1:28 PM
W40
LViWID M 16 H l ki H l i hi W040 W041 M i REBRANDO b 16 20158 19AM
widia.com
Hole Finishing
Hole Finishing
ROTAFLEX™ High-Performance Boring Systems
Spare Parts
catalogue number
fixing
screw
fixing
screw
disc
washer
hex
wrench
12600020000 12147739900 12147625400 12147600300 12147666700
12600027800 12147739900 12147625400 12147600300 12147666700
12600035800 12147739900 12147625400 12147600300 12147666700
12600043800 12147739900 12147625400 12147600300 12147666700
Bridge Tool • Large
NOTE: Use of ISO cartridges SCLCL12CA12, STGCL12CA16, or SSRCL12CA12 is recommended.
order number catalogue number BR1 bore range D L1 kg
2005574 12600020000 200.000-280.000 40 50,6 2,00
2005602 12600027800 278.000-360.000 40 50,6 2,80
2005656 12600035800 358.000-440.000 40 61,6 2,50
2005722 12600043800 438.000-520.000 40 61,6 3,50
L1 Assy = L1 Bridge + L1 Insert Holder
L1 Assy = L1 Bridge + L1 Slide + L1 Cartridge
L1 Assy
L1 Assy
• For use with shell mill adaptors; please order separately.
• Bridge body shipped without ISO cartridges, slides, or micro-adjustable cartridges.
• Order ISO cartridges separately for rough boring.
• Order micro-adjustable cartridges separately for ne boring.
WID_Master16_Holemaking_Holefinishing_W040_W041_Metric_REBRAND.indd 40 10/29/15 1:28 PM
W41
LViWID M 16 H l ki H l fi i hi W040 W041 M i REBRANDO b 1620158 19AM
widia.com
Hole Finishing
Hole Finishing
ROTAFLEX™ High-Performance Boring Systems
Slide for ISO Cartridges
order number catalogue number L1
fixing
screw
adjusting
screw
hex
wrench
hex
wrench
2005576 12614020100 19,4 12147625200 12147739800 12148041300 12148041200
Slide for Micro-Adjustable Cartridges
order number catalogue number L1
fixing
screw
adjusting
screw
hex
wrench
3860905 SMAC200 13,9 12147519100 12147739800 12148041200
WID_Master16_Holemaking_Holefinishing_W040_W041_Metric_REBRAND.indd 41 10/29/15 1:28 PM
W42
LViWID M 16 H l ki H l i hi W042 W043 M i REBRANDO b 16 20158 19AM
widia.com
Hole Finishing
ROTAFLEX™ High-Performance Boring Systems
80° Lead Insert Holder • S-Style
order number catalogue number D min D max L1 L1A
gage
insert
2005620 12626003000 30,00 39,00 12,35 1,30 SP..0703..
2005676 12626004000 39,00 50,00 16,30 1,50 SC../SP..09T3..
2005814 12626005000 50,00 67,00 21,80 2,10 SC../SP..1204..
2005941 12626006700 67,00 88,00 24,30 2,10 SC../SP..1204..
Hole Finishing
Spare Parts
catalogue number
clamping
screw
adjusting
screw
adjusting
screw Nm
Torx
wrench
hex
wrench
12626003000 12148067200 12148069600 — 1,0 12148086600 12148040900
12626004000 12148038800 12148069600 — 3,0 12148082400 12148040900
12626005000 12148007200 12147602200 — 3,5 12148099400 12148041000
12626006700 12148007200 — 12147665000 3,5 12148099400 12148041100
WID_Master16_Holemaking_Holefinishing_W042_W043_Metric_REBRAND.indd 42 10/29/15 1:28 PM
W43
LViWID M 16 H l ki H l fi i hi W042 W043 M i REBRANDO b 1620158 19AM
widia.com
Hole Finishing
ROTAFLEX™ High-Performance Boring Systems
90° Lead Insert Holder • T-Style
order number catalogue number D min D max L1
gage
insert
2005674 12625804000 39,00 50,00 16,30 TC../TP..1102..
2005802 12625805100 50,00 67,00 21,80 TC../TP..16T3..
2005939 12625806800 67,00 88,00 24,30 TC../TP..16T3..
Hole Finishing
Spare Parts
catalogue number
clamping
screw
adjusting
screw
adjusting
screw Nm
Torx
wrench
hex
wrench
12625804000 12148068700 12148069600 — 1,0 12148086600 12148040900
12625805100 12148038800 12147602200 — 3,0 12148099400 12148041000
12625806800 12148038800 — 12147665000 3,5 12148099400 12148041100
WID_Master16_Holemaking_Holefinishing_W042_W043_Metric_REBRAND.indd 43 10/29/15 1:28 PM
W44
LViWID M 16 H l ki H l i hi W044 W045 M i REBRANDO b 16 20158 20AM
widia.com
Hole Finishing
ROTAFLEX™ High-Performance Boring Systems
90° Lead Insert Holder • C-Style
order number catalogue number D min D max L1
gage
insert
2005580 12625702200 22,50 30,00 12,05 CC../CP..0602..
2005618 12625703000 30,00 39,00 12,35 CC../CP..0602..
2005673 12625704000 39,00 50,00 16,30 CC../CP..09T3..
2005801 12625705000 50,00 67,00 21,80 CC../CP..1204..
2005938 12625706700 67,00 88,00 24,30 CC../CP..1204..
2006041 12625708986 88,00 115,00 36,30 CC../CP..1204..
Hole Finishing
Spare Parts
catalogue number
clamping
screw
adjusting
screw
adjusting
screw Nm
Torx
wrench
hex
wrench
12625702200 12148086600 12147579300 — 1,0 12148086600 12148046000
12625703000 12148086600 12148069600 — 1,0 12148086600 12148040900
12625704000 12148082400 12148069600 — 3,0 12148082400 12148040900
12625705000 12148099400 12147602200 — 3,5 12148099400 12148041000
12625706700 12148099400 — 12147665000 3,5 12148099400 12148041100
12625708900 12148099400 12148541600 — 3,5 12148099400 12148041100
WID_Master16_Holemaking_Holefinishing_W044_W045_Metric_REBRAND.indd 44 10/29/15 1:28 PM
W45
LViWID M 16 H l ki H l fi i hi W044 W045 M i REBRANDO b 1620158 20AM
widia.com
Hole Finishing
ROTAFLEX™ High-Performance Boring Systems
70° Lead Insert Holder • C-Style
order number catalogue number D min D max L1 L1A
gage
insert
2005581 12625902200 22,50 30,00 12,35 1,60 CC../CP..0602..
2005619 12625903000 30,00 39,00 12,35 1,60 CC../CP..0602..
2005675 12625904000 39,00 50,00 16,30 2,30 CC../CP..09T3..
2005813 12625905000 50,00 67,00 21,80 3,10 CC../CP..1204..
2005940 12625906700 67,00 88,00 24,30 3,10 CC../CP..1204..
2006054 12625908986 88,00 115,00 36,30 3,10 CC../CP..1204..
Hole Finishing
catalogue number
clamping
screw
adjusting
screw
adjusting
screw Nm
Torx
wrench
hex
wrench
12625902200 12148068700 12147579300 — 1,0 12148086600 12148046000
12625903000 12148068700 12148069600 — 1,0 12148086600 12148040900
12625904000 — 12148069600 — 3,0 12148082400 12148040900
12625905000 12148007200 12147602200 — 3,5 12148099400 12148041000
12625906700 12148007200 — 12147665000 3,5 12148099400 12148041100
12625908900 — 12147602200 — 3,5 12148099400 12148041100
Spare Parts
WID_Master16_Holemaking_Holefinishing_W044_W045_Metric_REBRAND.indd 45 10/29/15 1:28 PM
W46
LViWID M 16 H l ki H l i hi W046 W047 M i REBRANDO b 16 20158 21AM
widia.com
Hole Finishing
ROTAFLEX™ High-Performance Boring Systems
90° Lead Micro-Adjustable Cartridge • C-Style
order number catalogue number F L1
gage
insert
insert
clamping screw
Torx
wrench Nm
3860908 MASCFCR09CA06F 16,00 45,50 CC..0602.. 12148068700 12148086600 1,0
Hole Finishing
• All cartridges have internal coolant supply directed to the cutting edge.
• 0,01mm diameter adjustment within a range of 0,3mm.
• Radial adjustment without inuence on axial position.
• Axial adjustment range of 1mm.
WID_Master16_Holemaking_Holefinishing_W046_W047_Metric_REBRAND.indd 46 10/29/15 1:28 PM
W47
LViWID M 16 H l ki H l fi i hi W046 W047 M i REBRANDO b 1620158 21AM
widia.com
Hole Finishing
ROTAFLEX™ High-Performance Boring Systems
95° Lead Micro-Adjustable Cartridge • C-Style
order number catalogue number F L1
gage
insert
insert
clamping screw
Torx
wrench Nm
3860909 MASCLCR09CA06F 16,00 45,50 CC..0602.. 12148068700 12148086600 1,0
Hole Finishing
• All cartridges have internal coolant supply directed to the cutting edge.
• 0,01mm diameter adjustment within a range of 0,3mm.
• Radial adjustment without inuence on axial position.
• Axial adjustment range of 1mm.
WID_Master16_Holemaking_Holefinishing_W046_W047_Metric_REBRAND.indd 47 10/29/15 1:28 PM
W48
LViWID M 16 H l ki H l i hi W048 W049 M i REBRANDO b 16 20158 21AM
widia.com
Hole Finishing
ROTAFLEX™ High-Performance Boring Systems
90° Lead Micro-Adjustable Cartridge • T-Style
order number catalogue number F L1
gage
insert
insert
clamping screw
Torx
wrench Nm
3860910 MASTFCR09CA11F 20,00 45,50 TC..1102.. 12148068700 12148086600 1,0
Hole Finishing
• All cartridges have internal coolant supply directed to the cutting edge.
• 0,01mm diameter adjustment within a range of 0,3mm.
• Radial adjustment without inuence on axial position.
• Axial adjustment range of 1mm.
WID_Master16_Holemaking_Holefinishing_W048_W049_Metric_REBRAND.indd 48 10/29/15 1:28 PM
W49
LViWID M 16 H l ki H l fi i hi W048 W049 M i REBRANDO b 1620158 21AM
widia.com
Hole Finishing
ROTAFLEX™ High-Performance Boring Systems
catalogue number
front clamping
screw 1
front clamping
screw 2
adjustment locking
screw
hex
wrench
hex
wrench
RFX420FBHBB006022 12148068700 12148042400 12147680500 12148041100 12148041300
Spare Parts
FBHBB • RFX Series Shank
order number catalogue number BR1 bore range D2 L1
CSMS
system size kg
3860906 RFX420FBHBB006022 6,000-22,000 42,00 95,00 RFX420 1,10
Hole Finishing
L1 Assy = L1 body + L1 insert holder
L1 Assy
• 0,01mm diameter adjustment.
• Basic body shipped without boring bars.
WID_Master16_Holemaking_Holefinishing_W048_W049_Metric_REBRAND.indd 49 10/29/15 1:28 PM
W50
LViWID M 16 H l ki H l i hi W050 W051 M i REBRANDO b 16 20158 22AM
widia.com
Hole Finishing
ROTAFLEX™ High-Performance Boring Systems
Spare Parts
FBHBB KM-TS
™
Series Shank
order number catalogue number BR1 bore range D2 L1
CSMS
system size kg
3860907 KM40TSFBHBB006022 6,000-22,000 42,00 105,00 KM40TS 1,10
L1 Assy = L1 body + L1 insert holder
L1 Assy
• 0,01mm diameter adjustment.
• Basic body shipped without boring bars.
catalogue number
front clamping
screw 1
front clamping
screw 2
adjustment locking
screw
hex
wrench
hex
wrench
KM40TSFBHBB006022 12147617400 12148042400 12147680500 12148041100 12148041300
Hole Finishing
WID_Master16_Holemaking_Holefinishing_W050_W051_Metric_REBRAND.indd 50 10/29/15 1:28 PM
W51
LViWID M 16 H l ki H l fi i hi W050 W051 M i REBRANDO b 1620158 22AM
widia.com
Hole Finishing
ROTAFLEX™ High-Performance Boring Systems
catalogue number
gage
insert
clamping
screw
Torx
wrench Nm
12627006200 CP..04T1.. 12148005800 12148005900 0,3
12627008200 CP..04T1.. 12148005800 12148005900 0,3
12627010200 CC../CP..0602.. 12148068700 12148086600 1,0
12627013200 CC../CP..0602.. 12148068700 12148086600 1,0
12627016200 CC../CP..0602.. 12148068700 12148086600 1,0
12627019300 CC../CP..0602.. 12148068700 12148086600 1,0
Spare Parts
Boring Bars for Precision Fine Boring Heads (FBHBB)
order number catalogue number D min D max L1 L4 aF° kg
2005954 12627006200 6,00 8,00 30,00 24,00 -5.00 0,10
2006015 12627008200 8,00 10,00 30,00 25,00 -3.00 0,10
2005499 12627010200 10,00 13,00 35,00 30,00 -11.00 0,10
2005542 12627013200 13,00 16,00 40,00 35,00 -9.00 0,10
2005558 12627016200 16,00 19,00 45,00 40,00 -6.00 0,10
2005573 12627019300 19,00 22,00 55,00 55,00 -6.00 0,20
Hole Finishing
• All boring bars have internal coolant supply directed to the cutting edge.
WID_Master16_Holemaking_Holefinishing_W050_W051_Metric_REBRAND.indd 51 10/29/15 1:28 PM
W52
LViWID M 16 H l ki H l i hi W052 W053 M i REBRANDO b 16 20158 22AM
widia.com
Hole Finishing
ROTAFLEX™ High-Performance Boring Systems
Spare Parts
FBH • RFX Series Shank
order number catalogue number BR1 bore range D2 L1 L1 assy
CSMS
system size kg
3861143 RFX185FBH022029 22,000-29,000 18,50 55,00 56,00 RFX185 0,20
3861144 RFX245FBH029038 29,000-38,000 24,50 60,00 62,00 RFX245 0,20
3861145 RFX320FBH038050 38,000-50,000 32,00 75,00 77,00 RFX320 0,50
3861146 RFX420FBH050065 50,000-65,000 42,00 95,00 98,00 RFX420 1,10
3861147 RFX550FBH065088 65,000-88,000 55,00 115,00 120,00 RFX550 2,10
3861148 RFX720FBH088115 88,000-115,000 72,00 155,00 160,00 RFX720 4,90
L1 Assy
• 0,01mm diameter adjustment.
• Basic body shipped without boring bars.
catalogue number
adjusting
screw
adjustment locking
screw
fixing
screw wedge
hex
wrench
hex
wrench
RFX185FBH022029 12147620000 12147680200 12346292100 12147621100 12148041100 12148040900
RFX245FBH029038 12147620000 12147680300 12346292200 12147621200 12148041100 12148040900
RFX320FBH038050 12147620300 12147680400 12147622300 12147621300 12148041200 12148041000
RFX420FBH050065 12147620400 12147680500 12148575900 12147621400 12148041300 12148041100
RFX550FBH065088 12147620500 12147680600 12148087100 12147621500 12148041400 12148041100
RFX720FBH088115 12147620600 12147680700 12148087100 12147621600 12148079000 —
Hole Finishing
WID_Master16_Holemaking_Holefinishing_W052_W053_Metric_REBRAND.indd 52 10/29/15 1:28 PM
W53
LViWID M 16 H l ki H l fi i hi W052 W053 M i REBRANDO b 1620158 22AM
widia.com
catalogue number
adjusting
screw
adjustment locking
screw
fixing
screw wedge
hex
wrench
hex
wrench
KM32TSFBH022029 12147620000 12147680200 12346292100 12147621100 12148041100 12148040900
KM32TSFBH029038 12147620000 12147680300 12346292200 12147621200 12148041100 12148040900
KM32TSFBH038050 12147620300 12147680400 12147622300 12147621300 12148041200 12148041000
KM40TSFBH029038 12147620000 12147680300 12346292200 12147621200 12148041100 12148040900
KM40TSFBH038050 12147620300 12147680400 12147622300 12147621300 12148041200 12148041000
KM40TSFBH050065 12147620400 12147680500 12148575900 12147621400 12148041100 12148041300
KM50TSFBH050065 12147620400 12147680500 12148575900 12147621400 12148041100 12148041300
KM50TSFBH065088 12147620500 12147680600 12148087100 12147621500 12148041200 12148041400
KM63TSFBH065088 12147620500 12147680600 12148087100 12147621500 12148041200 12148041400
KM63TSFBH088115 12147620600 12147680700 12148087100 12147621600 12148041200 12148079000
Spare Parts
FBH • KM
™
Series Shank
order number catalogue number BR1 bore range D2 L1 L1 assy
CSMS
system size kg
3861123 KM32TSFBH022029 22,000-29,000 18,50 60,00 62,00 KM32TS 0,20
3861124 KM32TSFBH029038 29,000-38,000 24,50 70,00 72,00 KM32TS 0,20
3861125 KM32TSFBH038050 38,000-50,000 32,00 80,00 82,00 KM32TS 0,50
3861126 KM40TSFBH029038 29,000-38,000 24,50 90,00 92,00 KM40TS 0,50
3861127 KM40TSFBH038050 38,000-50,000 32,00 100,00 103,00 KM40TS 0,90
3861128 KM40TSFBH050065 50,000-65,000 42,00 105,00 108,00 KM40TS 1,10
3861129 KM50TSFBH050065 50,000-65,000 42,00 110,00 115,00 KM50TS 1,20
3861130 KM50TSFBH065088 65,000-88,000 55,00 125,00 130,00 KM50TS 1,70
3861131 KM63TSFBH065088 65,000-88,000 55,00 130,00 135,00 KM63TS 2,50
3861132 KM63TSFBH088115 88,000-115,000 63,00 130,00 135,00 KM63TS 2,00
Hole Finishing
Hole Finishing
ROTAFLEX™ High-Performance Boring Systems
L1 Assy
• 0,01mm diameter adjustment.
• Basic body shipped without boring bars.
WID_Master16_Holemaking_Holefinishing_W052_W053_Metric_REBRAND.indd 53 10/29/15 1:28 PM
W54
LViWID M 16 H l ki H l i hi W054 W055 M i REBRANDO b 16 20158 23AM
widia.com
Hole Finishing
ROTAFLEX™ • High-Performance Boring Systems
Hole Finishing
Precision Head Insert Holder • C-Style
order number catalogue number D min D max L1 H H1 B
gage
insert
clamping
screw
Torx
wrench Nm
2004781 12627270300 22,00 29,00 19,00 8,00 4,50 8,00 CC../CP..0602.. 12148068700 12148086600 1,0
2004782 12627275300 29,00 38,00 27,00 8,00 4,50 8,00 CC../CP..0602.. 12148068700 12148086600 1,0
2004133 12627270700 38,00 50,00 35,00 10,00 5,50 10,00 CC../CP..0602.. 12148068700 12148086600 1,0
2004140 12627276500 50,00 65,00 46,00 12,00 6,50 12,00 CC../CP..0602.. 12148068700 12148086600 1,0
2004161 12627277700 65,00 88,00 60,00 16,00 8,00 16,00 CC../CP..09T3.. 12148038800 12148082400 3,0
2004177 12627278700 88,00 115,00 84,00 16,00 8,00 16,00 CC../CP..09T3.. 12148038800 12148082400 3,0
WID_Master16_Holemaking_Holefinishing_W054_W055_Metric_REBRAND.indd 54 10/29/15 1:28 PM
W55
LViWID M 16 H l ki H l fi i hi W054 W055 M i REBRANDO b 1620158 23AM
widia.com
Hole Finishing
ROTAFLEX™ High-Performance Boring Systems
Precision Head Insert Holder • T-Style
Hole Finishing
order number catalogue number D min D max L1 H H1 B
gage
insert
clamping
screw
Torx
wrench Nm
2004134 12627270800 38,00 50,00 35,00 10,00 5,50 10,00 TC../TP..1102.. 12148068700 12148086600 1,0
2004141 12627276800 50,00 65,00 46,00 12,00 6,50 12,00 TC../TP..1102.. 12148068700 12148086600 1,0
2004162 12627277800 65,00 88,00 60,00 16,00 8,00 16,00 TC../TP..1102.. 12148038800 12148082400 3,0
2004178 12627278800 86,00 115,00 84,00 16,00 8,00 16,00 TC../TP..1102.. 12148038800 12148082400 3,0
WID_Master16_Holemaking_Holefinishing_W054_W055_Metric_REBRAND.indd 55 10/29/15 1:28 PM
W56
LViWID M 16 H l ki H l i hi W056 W057 M i REBRANDO b 16 20158 24AM
widia.com
Hole Finishing
ROTAFLEX™ High-Performance Boring Systems
RFX • CV40 Taper Shank Form B/AD
NOTE: Lock screws included. Order retention knobs separately.
order number catalogue number
CSMS
system size
CSWS
system size D2 L1 kg lock screw
hex
wrench Nm
3860896 CV40BRFX185236 CV40 RFX185 18,5 60,0 1,1 RFX185LS 12148041100 6,0
3860897 CV40BRFX245236 CV40 RFX245 24,5 60,0 1,1 RFX245LS 12148041100 8,0
3860898 CV40BRFX320236 CV40 RFX320 32,0 60,0 1,1 RFX320LS 12148041200 14,0
3860899 CV40BRFX420236 CV40 RFX420 42,0 60,0 1,1 RFX420LS 12148041300 16,0
3860900 CV40BRFX550256 CV40 RFX550 55,0 65,0 1,2 RFX550LS 12148041400 20,0
Hole Finishing
WID_Master16_Holemaking_Holefinishing_W056_W057_Metric_REBRAND.indd 56 10/29/15 1:28 PM
W57
LViWID M 16 H l ki H l fi i hi W056 W057 M i REBRANDO b 1620158 24AM
widia.com
Hole Finishing
ROTAFLEX™ High-Performance Boring Systems
RFX • CV50 Taper Shank Form B/AD
NOTE: Lock screws included. Order retention knobs separately.
order number catalogue number
CSMS
system size
CSWS
system size D2 L1 kg lock screw
hex
wrench Nm
3860901 CV50BRFX320236 CV50 RFX320 32,0 60,0 3,1 RFX320LS 12148041200 12,0
3860902 CV50BRFX420236 CV50 RFX420 42,0 60,0 3,2 RFX420LS 12148041300 20,0
3860903 CV50BRFX550236 CV50 RFX550 55,0 60,0 3,4 RFX550LS 12148041400 25,0
3860904 CV50BRFX720276 CV50 RFX720 72,0 70,0 3,6 RFX720LS 12148041400 25,0
Hole Finishing
WID_Master16_Holemaking_Holefinishing_W056_W057_Metric_REBRAND.indd 57 10/29/15 1:28 PM
W58
LViWID M 16 H l ki H l i hi W058 W059 M i REBRANDO b 16 20158 24AM
widia.com
Hole Finishing
ROTAFLEX™ High-Performance Boring Systems
RFX • DV40 Taper Shank Form B/AD
NOTE: Lock screws included. Order retention knobs separately.
order number catalogue number
CSMS
system size
CSWS
system size D2 L1 kg lock screw
hex
wrench Nm
3860696 DV40BRFX185060M DV40 RFX185 18,5 60,0 1,1 RFX185LS 12148041100 6,0
3860697 DV40BRFX245060M DV40 RFX245 24,5 60,0 1,1 RFX245LS 12148041100 8,0
3860698 DV40BRFX320060M DV40 RFX320 32,0 60,0 1,1 RFX320LS 12148041200 14,0
3860699 DV40BRFX420060M DV40 RFX420 42,0 60,0 1,1 RFX420LS 12148041300 16,0
3860700 DV40BRFX550065M DV40 RFX550 55,0 65,0 1,2 RFX550LS 12148041400 20,0
Hole Finishing
WID_Master16_Holemaking_Holefinishing_W058_W059_Metric_REBRAND.indd 58 10/29/15 1:28 PM
W59
LViWID M 16 H l ki H l fi i hi W058 W059 M i REBRANDO b 1620158 24AM
widia.com
Hole Finishing
ROTAFLEX™ High-Performance Boring Systems
RFX • DV50 Taper Shank Form B/AD
NOTE: Lock screws included. Order retention knobs separately.
order number catalogue number
CSMS
system size
CSWS
system size D2 L1 kg lock screw
hex
wrench Nm
3860701 DV50BRFX320060M DV50 RFX320 32,0 60,0 3,1 RFX320LS 12148041200 14,0
3860702 DV50BRFX420060M DV50 RFX420 42,0 60,0 3,2 RFX420LS 12148041300 16,0
3860853 DV50BRFX550060M DV50 RFX550 55,0 60,0 3,4 RFX550LS 12148041400 20,0
3860854 DV50BRFX720065M DV50 RFX720 72,0 65,0 3,6 RFX720LS 12148041400 20,0
Hole Finishing
WID_Master16_Holemaking_Holefinishing_W058_W059_Metric_REBRAND.indd 59 10/29/15 1:28 PM
W60
LViWID M 16 H l ki H l i hi W060 W061 M i REBRANDO b 16 20158 25AM
widia.com
Hole Finishing
ROTAFLEX™ High-Performance Boring Systems
RFX • BT40 Taper Shank Form B/AD
NOTE: Lock screws included. Order retention knobs separately.
order number catalogue number
CSMS
system size
CSWS
system size D2 L1 kg lock screw
hex
wrench Nm
3860676 BT40BRFX185060M BT40 RFX185 18,5 60,0 1,0 RFX185LS 12148041100 8,0
3860677 BT40BRFX245060M BT40 RFX245 24,5 60,0 1,1 RFX245LS 12148041100 8,0
3860678 BT40BRFX320060M BT40 RFX320 32,0 60,0 1,1 RFX320LS 12148041200 12,0
3860679 BT40BRFX420060M BT40 RFX420 42,0 60,0 1,2 RFX420LS 12148041300 20,0
3860680 BT40BRFX550065M BT40 RFX550 55,0 65,0 1,3 RFX550LS 12148041400 25,0
Hole Finishing
WID_Master16_Holemaking_Holefinishing_W060_W061_Metric_REBRAND.indd 60 10/29/15 1:28 PM
W61
LViWID M 16 H l ki H l fi i hi W060 W061 M i REBRANDO b 1620158 25AM
widia.com
Hole Finishing
ROTAFLEX™ High-Performance Boring Systems
RFX • BT50 Taper Shank Form B/AD
NOTE: Lock screws included. Order retention knobs separately.
order number catalogue number
CSMS
system size
CSWS
system size D2 L1 kg lock screw
hex
wrench Nm
3860681 BT50BRFX320060M BT50 RFX320 32,0 60,0 3,5 RFX320LS 12148041200 14,0
3860682 BT50BRFX420060M BT50 RFX420 42,0 60,0 3,9 RFX420LS 12148041300 16,0
3860693 BT50BRFX550065M BT50 RFX550 55,0 65,0 4,2 RFX550LS 12148041400 25,0
3860694 BT50BRFX720070M BT50 RFX720 72,0 70,0 4,5 RFX720LS 12148041400 25,0
Hole Finishing
WID_Master16_Holemaking_Holefinishing_W060_W061_Metric_REBRAND.indd 61 10/29/15 1:28 PM
W62
LViWID M 16 H l ki H l i hi W062 W063 M i REBRANDO b 16 20158 25AM
widia.com
Hole Finishing
ROTAFLEX™ High-Performance Boring Systems
RFX • HSK63 Form A
NOTE: Lock screws included. HSK coolant unit and wrench are available but must be ordered separately.
order number catalogue number
CSMS
system size
CSWS
system size D2 L1 kg lock screw
hex
wrench Nm
3860549 HSK63ARFX185060M HSK63A RFX185 18,5 60,0 0,7 RFX185LS 12148041100 6,0
3860550 HSK63ARFX245060M HSK63A RFX245 24,5 60,0 0,7 RFX245LS 12148041100 8,0
3860551 HSK63ARFX320060M HSK63A RFX320 32,0 60,0 0,8 RFX320LS 12148041200 14,0
3860552 HSK63ARFX420070M HSK63A RFX420 42,0 70,0 1,0 RFX420LS 12148041300 16,0
3860623 HSK63ARFX550080M HSK63A RFX550 55,0 80,0 1,4 RFX550LS 12148041400 20,0
3860624 HSK63ARFX720095M HSK63A RFX720 72,0 95,0 2,0 RFX720LS 12148041400 20,0
Hole Finishing
WID_Master16_Holemaking_Holefinishing_W062_W063_Metric_REBRAND.indd 62 10/29/15 1:28 PM
W63
LViWID M 16 H l ki H l fi i hi W062 W063 M i REBRANDO b 1620158 25AM
widia.com
Hole Finishing
ROTAFLEX™ High-Performance Boring Systems
RFX • HSK100 Form A
NOTE: Lock screws included. HSK coolant unit and wrench are available but must be ordered separately.
order number catalogue number
CSMS
system size
CSWS
system size D2 L1 kg lock screw
hex
wrench Nm
3881208 HSK100ARFX420080M HSK100A RFX420 42,0 80,0 1,0 RFX420LS 12148041300 20,0
3881209 HSK100ARFX550090M HSK100A RFX550 55,0 90,0 2,2 RFX550LS 12148041400 25,0
3881210 HSK100ARFX720105M HSK100A RFX720 72,0 105,0 2,5 RFX720LS 12148041400 25,0
Hole Finishing
WID_Master16_Holemaking_Holefinishing_W062_W063_Metric_REBRAND.indd 63 10/29/15 1:28 PM
W64
LViWID M 16 H l ki H l i hi W064 W065 M i REBRANDO b 16 20158 26AM
widia.com
Hole Finishing
ROTAFLEX™ High-Performance Boring Systems
CS-RFX Adaptor • Lock Screw Design
order number catalogue number
CSMS
system size D1 D2 L1 L13 kg
3860547 RFX550CS27030M RFX550 27,0 55,0 30,0 21,0 0,9
3860548 RFX720CS40035M RFX720 40,0 72,0 35,0 27,0 1,8
Hole Finishing
catalogue number lock screw
RFX550CS27030M 12147522400
RFX720CS40035M KLS40M
Spare Parts
WID_Master16_Holemaking_Holefinishing_W064_W065_Metric_REBRAND.indd 64 10/29/15 1:28 PM
W65
LViWID M 16 H l ki H l fi i hi W064 W065 M i REBRANDO b 1620158 26AM
widia.com
RFX Extensions
order number catalogue number
CSMS
system size
CSWS
system size D2 L1 kg lock screw
hex
wrench Nm
3860450 RFX185RFX185030M RFX185 RFX185 18,5 30,0 0,1 RFX185LS 12148041100 6,0
3860451 RFX245RFX245035M RFX245 RFX245 24,5 35,0 0,2 RFX245LS 12148041100 8,0
3860452 RFX320RFX320050M RFX320 RFX320 32,0 50,0 0,3 RFX320LS 12148041200 14,0
3860473 RFX420RFX420060M RFX420 RFX420 42,0 60,0 0,8 RFX420LS 12148041300 16,0
3860474 RFX550RFX550090M RFX550 RFX550 55,0 90,0 1,6 RFX550LS 12148041400 20,0
3860475 RFX720RFX720100M RFX720 RFX720 72,0 100,0 3,1 RFX720LS 12148041400 25,0
Hole Finishing
ROTAFLEX™ High-Performance Boring Systems
NOTE: Lock screws included.
Hole Finishing
WID_Master16_Holemaking_Holefinishing_W064_W065_Metric_REBRAND.indd 65 10/29/15 1:28 PM
W66
LViWID M 16 H l ki H l i hi W066 W067 M i REBRANDN b 10 20151 55PM
widia.com
Hole Finishing
ROTAFLEX™ High-Performance Boring Systems
NOTE: Lock screws included.
RFX Reducers
order number catalogue number
CSMS
system size
CSWS
system size D D2 L1 L2 kg lock screw
hex
wrench Nm
3860419 RFX320RFX185030M RFX320 RFX185 32,0 18,5 30,0 15,0 0,2 RFX185LS 12148041100 6,0
3860420 RFX320RFX245040M RFX320 RFX245 32,0 24,5 40,0 25,0 0,2 RFX245LS 12148041100 8,0
3860421 RFX420RFX185035M RFX420 RFX185 42,0 18,5 35,0 15,0 0,4 RFX185LS 12148041100 6,0
3860422 RFX420RFX245045M RFX420 RFX245 42,0 24,5 45,0 25,0 0,4 RFX245LS 12148041100 8,0
3860443 RFX420RFX320045M RFX420 RFX320 42,0 32,0 45,0 25,0 0,6 RFX320LS 12148041200 14,0
3860444 RFX550RFX185040M RFX550 RFX185 55,0 18,5 40,0 15,0 0,7 RFX185LS 12148041100 6,0
3860445 RFX550RFX245050M RFX550 RFX245 55,0 24,5 50,0 25,0 0,8 RFX245LS 12148041100 8,0
3860446 RFX550RFX320050M RFX550 RFX320 55,0 32,0 50,0 25,0 0,8 RFX320LS 12148041200 14,0
3860447 RFX550RFX420055M RFX550 RFX420 55,0 42,0 55,0 30,0 0,9 RFX420LS 12148041300 16,0
3860448 RFX720RFX420060M RFX720 RFX420 72,0 42,0 60,0 30,0 1,6 RFX420LS 12148041300 16,0
3860449 RFX720RFX550060M RFX720 RFX550 72,0 55,0 60,0 30,0 1,8 RFX550LS 12148041400 20,0
Hole Finishing
WID_Master16_Holemaking_Holefinishing_W066_W067_Metric_REBRAND.indd 66 11/10/15 2:21 PM
Customer Application
Support (CAS)
ORIGINATING
COUNTRY LANGUAGE TEL FAX EMAIL
Australia English +61 001 724 539 6921 * 001 724 539 6830 * ap.techsupport@widia.com
Austria German 0800 291630 0049 911 9735 429* eu.techsupport@widia.com
Belgium English / French 0800 80410 0049 911 9735 429* eu.techsupport@widia.com
China Chinese +86 400 889 2237 +86 21 58999985 * w-cn.techsupport@widia.com
Denmark English +45 808 89295 001 724 539 6830 * na.techsupport@widia.com
Finland English 0800 919413 001 724 539 6830 * na.techsupport@widia.com
France Frensh +33 080 5540 379 0049 911 9735 429* eu.techsupport@widia.com
Germany German 0800 1015774 0911 9735 429* eu.techsupport@widia.com
India English +91 001 724539 6921 * 001 724 539 6830 * ap.techsupport@widia.com
Israel English +972 1809 449907 001 724 539 6830 * na.techsupport@widia.com
Italy Italian 800 916568 02 89512146 * eu.techsupport@widia.com
Japan English +81 001 724539 6921 * 001 724 539 6830 * ap.techsupport@widia.com
Korea (South) English +82 001 724539 6921 * 001 724 539 6830 * ap.techsupport@widia.com
Malaysia English +60 001 724539 6921 * 001 724 539 6830 * ap.techsupport@widia.com
Netherlands English 0800 0201131 001 724 539 6830 * na.techsupport@widia.com
New Zealand English +64 001 724539 6921 * 001 724 539 6830 * ap.techsupport@widia.com
Norway English 800 10081 001 724 539 6830 * na.techsupport@widia.com
Poland Polish 00800 4411943 06166 56504* eu.techsupport@widia.com
Russia (landline) Russian +7 8800 5556395 0048 6166 56504* eu.techsupport@widia.com
Russia (cell phone) Russian +7 8005556395 0048 6166 56504* eu.techsupport@widia.com
Singapore English +65 001 724539 6921 * 001 724 539 6830 * ap.techsupport@widia.com
South Africa English +27 0800 981644 001 724 539 6830 * na.techsupport@widia.com
Sweden English +46 020798794 001 724 539 6830 * na.techsupport@widia.com
Taiwan English +886 001 724539 6921 * 001 724 539 6830 * ap.techsupport@widia.com
Thailand English +66 001 724539 6921 * 001 724 539 6830 * ap.techsupport@widia.com
United Kingdom English +44 0800 028 2996 001 724 539 6830 * na.techsupport@widia.com
Ukraine Russian +380 0800502665 0048 6166 56504* eu.techsupport@widia.com
USA English 888 539 5145 001 724 539 6830 * na.techsupport@widia.com
Easy Access to Proven Metalworking Expertise!
WIDIA™ Customer Application Engineers assist customers and engineering groups
throughout the world with expert tool selection and application recommendations
for the entire range of WIDIA tooling.
For more information, contact your local WIDIA
Authorised Distributor or visit widia.com/services.
Phone and fax numbers marked with * are not toll free.
WID_Master16_Holemaking_Holefinishing_W066_W067_Metric_REBRAND.indd 67 11/10/15 2:21 PM
W68
LViWID M 16 H l ki H l i hi W068 W069 M i REBRANDO b 16 20158 28AM
widia.com
Hole Finishing
ROTAFLEX™ High-Performance Boring Systems
Eccentric bushing for fi ne adjustment
Regular ne boring heads have a threaded
spindle as an adjustment mechanism. In
this situation, spindle inaccuracy can cause
backlash and require extra effort during setup.
The ROTAFLEX eccentric bushing is easy to
use, and machining forces are transmitted
via a larger surface, ensuring a consistent
diameter during machining.
After rough adjustment of the insert
holder, the easy-to-read scale enables
ne adjustment to reach precisely the
diameter needed. Here, no parallax
errors occur when reading the scale.
Basic adaptor Eccentric bushing Boring bar adaptor
Design Principle
Adjustment
Unlock ne
adjustment ring
Set ne
adjustment
to zero
Lock ne
adjustment ring
Unlock insert
holder
Coarse adjustment
on pre-set equipment
Lock insert holder Control cut Measure
Unlock ne
adjustment ring Readjust
Lock ne
adjustment ring
WID_Master16_Holemaking_Holefinishing_W068_W069_Metric_REBRAND.indd 68 10/29/15 1:28 PM
W69
LViWID M 16 H l ki H l fi i hi W068 W069 M i REBRANDO b 1620158 28AM
widia.com
Hole Finishing
ROTAFLEX™ High-Performance Boring Systems
Application Hints • Micro-Adjustable Cartridges
Axial adjustment wedge
1mm adjustment range
Fastening screw
Lubrication nipple
Lithium saponi ed hydroxide is the recommended
grease. The maintenance interval depends on the
operating conditions. In permanent operations, a
regreasing is recommended every four weeks.
Old RFX screw-type coupling can be mounted into new RFX bayonet-type adaptors as well.
Application Hints • RFX Coupling
Old RFX —
Torque ats needed
to disassemble.
Old RFX —
Cylinder and thread.
NEW RFX —
Bayonet type of coupling,
with axial preload for stability.
NEW RFX – Adaptors
Two radial screws clamp,
preload the coupling, and enable
rotation in both directions.
Thread —
Able to assemble
old RFX as well.
Micro adjustment
0,01mm diameter adjustment.
Radial adjustment range of 0,6mm.
Rotation speed max 10,000 RPM
WID_Master16_Holemaking_Holefinishing_W068_W069_Metric_REBRAND.indd 69 10/29/15 1:28 PM
W70
LViWID M 16 H l ki H l i hi W070 W071 M i REBRANDO b 16 20158 29AM
widia.com
Type of Tooling Stable Unstable Tests Necessary
Twin Cutter Solid Tools <3,5 x D 3,5–6,5 x D >6,5 x D
Twin Cutter Bridge Tools <3,5 x D 3,5–6,5 x D >6,5 x D
Fine-Boring Heads with Boring Bar (FBHBB) <3,5 x D 3,5–5,0 x D >5,0 x D
Fine-Boring Heads (FBH) <3,5 x D 3,5–5,0 x D >5,0 x D
Fine-Boring Bridge Tools <3,5 x D 3,5–5,0 x D >5,0 x D
Function of the tool is
expected without issues
within recommended
cutting data.
Application may require
reduced feeds and/or speeds
compared to stable conditions.
Machining test may
be required to identify
cutting data.
• Identify your critical diameter (D).
• Identify the maximum distance cutting edge (L) to critical diameter.
Here are some examples:
Refer to this table for rst investigation of application:
L
L
D
D
D
Hole Finishing
ROTAFLEX™ High-Performance Boring Systems
General Application Hints
It is generally assumed that the tools have been properly mounted as per the technical recommendations in this catalogue.
Causes of and remedies for rough and fi ne boring problems
Problem Cause Possible Remedy
Vibration tendency
1. Overhang
2. Choice of insert
3. Cutting data
• Adjust L/D ratio
• Select 90° lead angle on rough boring tools
• Select inserts with positive geometry
• Select inserts with smaller corner radius
• Reduce depth of cut
• Increase feed
Slight chatter marks on surface
1. Choice of insert
2. Cutting data
3. Machining environment
• Select 90° lead angle
• Select ground inserts with small edge preparation
• Select inserts with smaller corner radius
• Increase feed
• Increase coolant
Conical bores
1. Choice of insert
2. Cutting data
3. Machining environment
• Select a more wear-resistant insert grade
• Increase cutting speed
• Check whether all screws have been tightened
to recommended torque
WID_Master16_Holemaking_Holefinishing_W070_W071_Metric_REBRAND.indd 70 10/29/15 1:28 PM
W71
LViWID M 16 H l ki H l fi i hi W070 W071 M i REBRANDO b 1620158 29AM
widia.com
Hole Finishing
Inserts Overview
Geometry Application
ANSI
catalogue
number
ISO
catalogue
number
PMKS
WP15CT WP25CT WP35CT WM15CT WM25CT WK05CT WK20CT WS10PT WS25PT
CCMT-FP •
Fine Finishing
CCMT2151FP CCMT060204FP
CCMT3251FP CCMT09T304FP
CCMT-MU •
Medium to
Finishing
CCMT2152MU CCMT060208MU
CCMT3251MU CCMT09T304MU
CCMT3252MU CCMT09T308MU
CCMT432MU CCMT120408MU
CCMT-MP •
Roughing to
Medium
CCMT2151MP CCMT060204MP
CCMT3251MP CCMT09T304MP
CCMT3252MP CCMT09T308MP
CCMT432MP CCMT120408MP
CCMT433MP CCMT120412MP
Inserts Overview
WID_Master16_Holemaking_Holefinishing_W070_W071_Metric_REBRAND.indd 71 10/29/15 1:29 PM
W72
LViWID M 16 H l ki H l i hi W072 W073 M i REBRANDN b 12 201510 41AM
widia.com
Hole Finishing Custom Solution Tool Styles:
• Reaming
• Boring
• Countersinking
• PCD Round Tools
With our state-of-the-art CNC equipment and engineering processes, we can design complex
geometries for reaming and countersinking. Special countersinks for pre-working and fi nishing
operations minimise machine time and rationalise production. Our custom solution reamers deliver
proven performance in applications that demand high surface qualities, narrow fi t, alignment tolerances,
and long tool life.
Hole Finishing
Capabilities and
Custom Solutions
WID_Master16_Holemaking_Holefinishing_W072_W073_Metric_REBRAND.indd 72 11/12/15 11:59 AM
W73
LViWID M 16 H l ki H l fi i hi W072 W073 M i REBRANDN b 12201510 41AM
widia.com
Hole Finishing Capabilities and Custom
Solution Services
• Development, design, and production of different types of cutting tools for
reaming, boring, and countersinking.
• Services provided by one engineering department fully integrated with all
WIDIA™ focused factories.
• Capabilities with all common cutting materials such as high-speed steel
(HSS-E), powdered metal, solid carbide, carbide-tipped, cermet, and PCD,
with or without internal coolant.
• Complete tool competence from one source, from construction, application
engineering, development, and production through tool reconditioning services.
WID_Master16_Holemaking_Holefinishing_W072_W073_Metric_REBRAND.indd 73 11/12/15 11:59 AM
W74
LViWID M 16 H l ki H l i hi W074 W075 M i REBRANDN b 12 201510 49AM
widia.com
Port Contour Cutters •
For Fluid-Powered Standard Ports
Port Contour Cutters
• Each component has entry and exit points for the
fl uid involved called ports.
• Port shapes and forms are standardised.
• WIDIA™ offers porting tools to fi nish these
ports in one-shot operations.
Standard
Port Available Cutters
JDS-G173.1 169-0XXX WITH GROOVE & 169-1XXX WITHOUT GROOVE & 269-0XXX WITH GROOVE & 269-1XXX WITHOUT GROOVE
AS5202 169-0XXX WITH GROOVE & 169-1XXX WITHOUT GROOVE & 269-0XXX WITH GROOVE & 269-1XXX WITHOUT GROOVE
ISO-6149-1 169-0XXX WITH GROOVE & 169-1XXX WITHOUT GROOVE & 269-0XXX WITH GROOVE & 269-1XXX WITHOUT GROOVE
SAE J2241/1 169-0XXX WITH GROOVE & 169-1XXX WITHOUT GROOVE & 269-0XXX WITH GROOVE & 269-1XXX WITHOUT GROOVE
NPTF/NPT 186, 187 & 287
MS 16142 163, 253, 263, 267, 367 & 467
CAT.IE2554 163, 253, 263, 267, 367 & 467
SAE J1926-1 163, 253, 263, 267, 367 & 467
BSPP/BSPF 265
AS1300 RCT SERIES/CUSTOM SOLUTION
MS33659 164, 264 & 268
AND10050 164, 264 & 268
ISO-1179-1 255 STD. LGHT. & 265 EXT. LGTH. REAMER
DIN-3852-2 225 SMALL, 235 LARGE & 245 EXT. LGTH. REAMER
WID_Master16_Holemaking_Holefinishing_W074_W075_Metric_REBRAND.indd 74 11/12/15 11:59 AM
W75
LViWID M 16 H l ki H l fi i hi W074 W075 M i REBRANDN b 12201510 49AM
widia.com
Port Contour Cutters
• Dura-bar 65-45-12.
• Component: General cavity.
• Ream SAE#8.
• Surface finish below Ra 32 (inch).
• Cermet-tipped port cutting tool.
CHALLENGE
SOLUTION
CUTTING
DATA
RESULT
BENEFIT
• 2100 RPM–20 IPM.
• Flood coolant.
• Machining centre.
• Surface finish of 7–15 RA (inch).
• Increase productivity by one-shot
finishing of port.
Hole Finishing Application Example
Port Contour Cutters
WID_Master16_Holemaking_Holefinishing_W074_W075_Metric_REBRAND.indd 75 11/12/15 11:59 AM
W76
LViWID M 16 H l ki H l i hi W076 W077 M i REBRANDN b 10 20153 55PM
widia.com
Custom Solutions •
Countersinking and Reaming
With our state-of-the-art equipment and engineering processes, we can design complex geometries for
reaming and countersinking. Special countersinks for pre-working and fi nishing operations minimise
machining time and rationalise production. Our custom solution reamers deliver proven performance in
applications that demand high surface qualities, narrow fi t, alignment tolerances, and long tool life.
Reamer Custom Solutions
WID_Master16_Holemaking_Holefinishing_W076_W077_Metric_REBRAND.indd 76 11/10/15 5:00 PM
W77
LViWID M 16 H l ki H l fi i hi W076 W077 M i REBRANDN b 1020153 55PM
widia.com
Grades • Various grades available tailored to your
specifi c application.
Leads • 25–90° leads for smoother cutting or better positioning.
• Double leads for better surface quality.
• Radius leads for optimal CI machining.
Radial Land
• Cylindrical for better guiding and form.
• Upsharp (no land) for best surface fi nishes and
less passive forces.
• Narrow land to reduce forces.
Lead
Angle
Radial
Land
Diameter • 1,4–50mm (.055–1.968").
• Up to tolerance IT6 depending on application.
• Diameter steps.
WID_Master16_Holemaking_Holefinishing_W076_W077_Metric_REBRAND.indd 77 11/10/15 5:00 PM
W78
LViWID M 16 H l ki H l i hi W078 W079 M i REBRANDD b 1 201510 55AM
widia.com
Hole Finishing Application Example
Heat Exchanger • Tube Sheets
TRM – TOP REAM MODULAR
• Tube holes Ø 25,25mm (.994").
• Tolerance range 100 μm.
• Alloy steel, long-chipping.
• Machining center with internal coolant.
• Six cutting edges.
• Coated cermet.
• Standard 5 x D body clamped into
hydraulic chuck.
• vc = 90 m/min (295 SFM).
• f = 0,48 mm/rev (.019 IPR).
• After more than 30 minutes only
minor wear visible.
• Reduction of machining time in total to less
than 60 minutes per plate with 180 holes.
• Predictable tool life as only 2 μm diameter
deviation after 30 minutes tool life.
CHALLENGE
SOLUTION
CUTTING
DATA
RESULT
BENEFIT
WID_Master16_Holemaking_Holefinishing_W078_W079_Metric_REBRAND.indd 78 12/1/15 10:55 AM
W79
LViWID M 16 H l ki H l fi i hi W078 W079 M i REBRANDD b 1201510 55AM
widia.com
Hole Finishing Application Example
Aluminium Gear Housing
PCD STEP REAMER
• Bearing bore Ø 130mm.
• Tolerance range 25 μm S6.
• Aluminium AlSi8Cu3.
• Varying depth of cut ca. 0,5–5mm.
• Machining centre with internal coolant.
• PCD tipped, steel-based tool with HSK
interface and internal coolant.
• Six effective cutting and chamfering teeth
in positive cutting position.
CHALLENGE
SOLUTION
CUTTING
DATA
RESULT
BENEFIT
• vc = 350 m/min (1.148 SFM).
• f = 0,60 mm/rev (.024 IPR).
• Tool life increase versus previous solution.
• Surface finish Ra 0.2 μm.
• Secure process.
• Most productive solution at large diameter.
• Very long tool life.
• Reconditionable.
Highly uneven flute design
reduces vibrations.
WID_Master16_Holemaking_Holefinishing_W078_W079_Metric_REBRAND.indd 79 12/1/15 10:55 AM
W80
LViWID M 16 H l ki H l i hi W080 W081 M i REBRANDN b 12 201510 51AM
widia.com
PCD • Round Tools for Holemaking
Cutting Materials • Hardness vs. Toughness
CVD
Diamond PCD
MCD
Mono-Crystalline Diamond
SUPER-HARD
TOOL MATERIALS
PcBN
Oxide Ceramics
Nitride Ceramics
Cermets
Coated
Carbides Nano-carbide with
nano-coating
Micro-grain
Carbides
Uncoated Carbides
HSS
Toughness
Hardness
Type: CT
Corner tipped
Type: CTE
Corner tipped with centre point
Type: SW
Sandwich
Type: MT
For body = steel
For general applications. For precasted bores. For highly abrasive materials. For breaking through the
casting skin.
> ø4,2mm > ø4,2mm > ø5mm > ø12mm
WIDIA™ PCD Drill-Pointed Geometries
Hole Finishing
PCD • Round Tools for Holemaking
WID_Master16_Holemaking_Holefinishing_W080_W081_Metric_REBRAND.indd 80 11/12/15 12:00 PM
W81
LViWID M 16 H l ki H l fi i hi W080 W081 M i REBRANDN b 12201510 51AM
widia.com
Non-Ferrous Materials
WIDIA™ PCD Styles for Reamers/CS
N2
N3
N4
N5
N6
N7
Low-Silicon Aluminium Alloys (Hypoeutectic <12.2% Si) and Magnesium Alloys
High-Silicon Aluminium Alloys (Hypereutectic >12.2% Si) and Magnesium Alloys
Copper, Brass, Zinc-Based Materials
Nylon, Plastics, Rubber, Phenolics, Resins, Fibreglass, Glass
Carbon and Graphite Composites: Brush Alloys, Kevlar, Graphite
MMCs — Aluminium Based Metal Matrix Composites
PKD ST —
Steel Shank
PKD SC —
Solid Carbide
Shank
PKD STM —
Monoblock
PKD STMJ —
Adjustable
Cutting Edges
Hole Finishing
PCD • Round Tools for Holemaking
Material Coolant Style
Grade
Coolant Style
Grade
Coolant Style
Grade
Al <7% MQL,
Emulsion PCD SC
PCD STM
PCD STMU
WBK45U
Al <12% MQL,
Emulsion WBK45U
Al <12% Emulsion PCD SC WBK45U
Mg Alloys Emulsion PCD SC WBK45U
CFK Dry PCD SC WBK45U
WID_Master16_Holemaking_Holefinishing_W080_W081_Metric_REBRAND.indd 81 11/12/15 12:00 PM
LViWID M 16 T X000 X001 M i REBRAND N b 20 2015 11 44 AM
widia.com
WID_Master16_Taps_X000_X001_Metric_REBRAND.indd 2 11/20/15 11:45 AM
X1
LViWID M 16 T X000 X001 M i REBRANDN b 20 201511 44AM
widia.com
Tapping Introduction ............................................................................................................................................X2–X9
Spiral-Point/Left-Hand Spiral-Flute Taps .........................................................................................................Y2–Y17
Spiral-Flute Taps ..............................................................................................................................................Y18–Y42
Straight-Flute Taps ...........................................................................................................................................Y44–Y56
Forming Taps ....................................................................................................................................................Y58–Y63
Thread Mills.......................................................................................................................................................Y64–Y83
High-Performance Taps Application Data .....................................................................................................Y84–Y86
Technical Information ....................................................................................................................................Y88–Y115
Tapping
WID_Master16_Taps_X000_X001_Metric_REBRAND.indd 1 11/20/15 11:45 AM
X2
LViWID M 16 T X002 X003 M i REBRAND N b 13 2015 8 55 AM
widia.com
High-Performance Taps
Selection Guide
hole thread coolant
size
range
grade/
coating
material chamfer
helix
angle dimension
Good
Better
through blind cutting forming flood through
carbide
HSS-E-PM
HSS-E
HSS
type form
Best
series min–max
Spiral-Flute Taps
GT30
X X X M24–M42 GP6520 X semi-
bottom C 45° DIN 376, XL
GT30
X X X M3–M42 GP6520,
GM6515,
GP6505 Xsemi-
bottom C 45° DIN 371,
374, 376
GT31
X X X M5–M42 GP6520,
GM6515 Xsemi-
bottom C 45° DIN371,
376
GT31
X X X M24–M42 GP6520 X semi-
bottom C 45° DIN 376, XL
GT32
X X X M5–M16 GP6520 X
bottoming
E 45° DIN 371,
374, 376
GT33
X X X M5–M16 GP6520 X
bottoming
E 45° DIN 371,
374, 376
GT50
X X X M24–M42 GP6520 X semi-
bottom C 15° DIN 376, XL
Spiral-Point and Left-Hand Spiral-Flute Taps
GT20
X X X M3–M42 GP6520,
GM6515 X plug D L15° DIN 371,
374, 376
GT20
X X X M24–M42 GP6520 X plug D L15° DIN 376, XL
GT21
X X X M5–M14 GP6520,
GM6515 X plug D L15° DIN 371,
376
GT10
X X X M3–M20 WS32MG X plug D L8° DIN 371,
376
GT14
X X X M3–M12 WN35MG X plug B 0° DIN 371,
376
GT70
X X X M3–M16 WN48EG X plug B 0° DIN 371,
376
GT00
X X X M3–M20 WP31MG X plug B 0° DIN 371,
374, 376
VTSP060
X X X #4–1" WP49EG,
WU41EG XplugB0°
DIN 371,
376
VTSP065
X X X M2–M36
WP42EG,
WU41EG,
WP49EG,
WU40EG
XplugB0°
DIN 371,
374, 376
VTSP075
X X X M3–M20 WU41EG,
WU40EG X plug B 0° JIS
GT51
X X X M24–M42 GP6520 X semi-
bottom C 15° DIN 376, XL
GT12
X X X M3–M20 WS32MG X semi-
bottom C 10° DIN 371,
376
GT16
X X X M3–M12 WN35MG X semi-
bottom C 30° DIN 371
GT80
X X X M3–M20 WN48EG X semi-
bottom C 45° DIN 371,
376
WID_Master16_Taps_X002_X003_Metric_REBRAND.indd 2 11/13/15 9:39 AM
X3
LViWID M 16 T X002 X003 M i REBRANDN b 13 20158 55AM
widia.com
High-Performance Taps
Selection Guide
PMKN S H
page(s)
recommended
cutting
parameters
1, 2, 3, 4,
6, 7
5, 9, 10,
11 12, 13.1 13.2 14.1, 14.2,
14.3, 14.4 15, 16 17, 18,
19, 20 21 22, 23,
24, 25 26, 27, 28 31, 32 33, 34, 35 36 37
38.1, 38.2,
40.1,40.2,
41.1
39.1,
41.2
Steel <35 HRC
Steel >36–48 HRC
PH and Ferritic
Stainless Steel
<35 HRC
PH and Ferritic
Stainless Steel
>35 HRC
Stainless Steel
Grey Cast Iron
Ductile Cast Iron
Wrought Aluminium
Cast Aluminium
Copper,
Copper Alloys
Iron Based
Cobalt Based
Nickel Based
Titanium
Alloys
Hardened Steels
49–55 HRC
Hardened Steels
56–68 HRC
Spiral-Flute Taps (continued)
Y21 Y85
Y20 Y85
Y22 Y85
Y23 Y85
Y24 Y85
Y25 Y85
Y26 Y85
Spiral-Point and Left-Hand Spiral-Flute Taps (continued)
Y4 Y85
Y5 Y85
Y6 Y85
Y7 Y85
Y8 Y85
Y9 Y85
Y10 Y85
Y11 Y86
Y14 Y86
Y17 Y86
Y28 Y85
Y30 Y85
Y31 Y85
Y32 Y85
WID_Master16_Taps_X002_X003_Metric_REBRAND.indd 3 11/13/15 9:39 AM
X4
LViWID M 16 T X004 X005 M i REBRAND N b 13 2015 8 55 AM
widia.com
hole thread coolant
size
range
grade/
coating
material chamfer
helix
angle dimension
Good
Better
through blind cutting forming flood through
carbide
HSS-E-PM
HSS-E
HSS
type form
Best
series min–max
High-Performance Taps
Selection Guide
Spiral-Flute Taps (continued)
Straight-Flute Taps
GX10 X X X X M3–M16 WH16PG X semi-
bottom C0°
DIN 371,
374, 376
GX35 X X X M6–M16 WK12PG X bottom E 0° HA6535
GX35 X X X M6–M14 WK12PG X bottom E 0° DIN 371,
374, 376
GX47 X X X M6–M10 WN14PG X bottoming E 0° DIN 371
GX47 X X X M6–M16 WN14PG X bottom E 0° HA6535
GX50 X X X M4–M14 WK12PG X semi-
bottom C0°
DIN 371,
DIN 376
GT40 X X X X M4–M22 GP6520 X semi-
bottom C0°
DIN 371,
374, 376
GT41 X X X X M4–M20 GP6520 X semi-
bottom C0°
DIN 371,
374, 376
GT42 X X X M5–M20 GP6520 X bottoming E 0° DIN 371,
374, 376
GT43 X X X M5–M20 GP6520 X bottoming E 0° DIN 371,
374, 376
GT06 X X X X M6–M16 WS32MG X semi-
bottom C0°
DIN 371,
374, 376
GT02 X X X M3–M20 WP31MG X semi-
bottom C 25° DIN 371,
374, 376
GT04 X X X M3–M20 WH36MG X semi-
bottom C 42° DIN 371,
374, 376
VTSFT60 X X X #4–1"WP49EG,
WU41EG Xsemi-
bottom C 45° DIN 371,
376
VTSFT65 X X X M2–M36
WP42EG,
WU41EG,
WP49EG,
WU40EG
Xsemi-
bottom C 45° DIN 371,
374, 376
VTSFT65 X X X M3–M20 WP49EG,
WP42EG X bottoming E 45° DIN 371,
374, 376
VTSFT75 X X X M3–M20 WU41EG,
WU40EG Xsemi-
bottom C 45° JIS
Form Taps
GX49
X X X M6–M10 WN14PG X bottoming E — DIN 374
GX49
X X X M6–M12 WN14PG X bottoming E — HA6535
GT22
X X X X M3–M16 WP31MG,
WN38MG Xsemi-
bottom C — DIN 2174
GT23
X X X X M5–M16 WP31MG,
WN38MG Xsemi-
bottom C — DIN 2174
WID_Master16_Taps_X004_X005_Metric_REBRAND.indd 4 11/13/15 9:39 AM
X5
LViWID M 16 T X004 X005 M i REBRANDN b 13 20158 55AM
widia.com
PMKN S H
page(s)
recommended
cutting
parameters
1, 2, 3, 4,
6, 7
5, 9, 10,
11 12, 13.1 13.2 14.1, 14.2,
14.3, 14.4 15, 16 17, 18,
19, 20 21 22, 23,
24, 25 26, 27, 28 31, 32 33, 34, 35 36 37
38.1, 38.2,
40.1,40.2,
41.1
39.1,
41.2
Steel <35 HRC
Steel >36–48 HRC
PH and Ferritic
Stainless Steel
<35 HRC
PH and Ferritic
Stainless Steel
>35 HRC
Stainless Steel
Grey Cast Iron
Ductile Cast Iron
Wrought Aluminium
Cast Aluminium
Copper,
Copper Alloys
Iron Based
Cobalt Based
Nickel Based
Titanium
Alloys
Hardened Steels
49–55 HRC
Hardened Steels
56–68 HRC
High-Performance Taps
Selection Guide
Spiral-Flute Taps (continued)
Straight-Flute Taps (continued)
Y46 Y84
Y47 Y84
Y48 Y84
Y49 Y84
Y50 Y84
Y51 Y84
Y33 Y85
Y34 Y85
Y35 Y86
Y38 Y86
Y41 Y86
Y42 Y86
Y52 Y85
Y53 Y85
Y54 Y85
Y55 Y85
Y56 Y85
Form Taps (continued)
Y60 Y84
Y61 Y84
Y62 Y85
Y63 Y85
WID_Master16_Taps_X004_X005_Metric_REBRAND.indd 5 11/13/15 9:39 AM
X6
LViWID M 16 T X006 X007 M i REBRAND O b 23 2015 9 48 AM
widia.com
High-Performance Taps
Grades and Grade Descriptions
wear
resistance toughness
Coating Grade Description 05 10 15 20 25 30 35 40 45
Coatings are designed for
optimised tapping performance
in specifi c materials .
Grade
PSteel
MStainless Steel
KCast Iron
NNon-Ferrous
SHigh-Temp Alloys
HHardened Materials
WK12PG
PVD coated TiCN and ne grain carbide. Extraordinary wear resistance when
tapping cast iron. High-temperature hardness allows long life at up to 4x faster
speed than HSS-E-PM taps.
K
WN14PG
Coated carbide, PVD two-layer coating over ne-grain carbide. Coating consists of
low friction CrC/C over wear-resistant TiN. CrC/C resists galling of non-ferrous
materials to the tap. Provides superior performance for tapping cast aluminium and
other non-ferrous materials. N
WH16PG
Coated carbide, PVD two-layer coating with heat-resistant TiAlN base layer
and low-friction MoS2 top layer over carbide substrate. Use in hardened steel
55–63 HRC.
H
GP6520
Coated HSS-E-PM, PVD heat- and wear-resistant high-vanadium cobalt powder
metal HSS substrate coated with wear-resistant TiCN base layer. Use in steel,
cast iron, and cast aluminium with silicon.
P
K
GM6515
HSS-E-PM, PVD heat- and wear-resistant high-vanadium cobalt powder
metal HSS substrate. Coating consists of low-friction CrC/C over wear-resistant
TiN base layer. Use for tapping stainless steel and non-ferrous materials.
M
N
WID_Master16_Taps_X006_X007_Metric_REBRAND.indd 6 10/30/15 3:01 PM
X7
LViWID M 16 T X006 X007 M i REBRANDO b 23 20159 48AM
widia.com
High-Performance Taps
Grades and Grade Descriptions
wear
resistance toughness
Coating Grade Description 05 10 15 20 25 30 35 40 45
WS34MG
Coated HSS-E-PM, PVD heat- and wear-resistant high-vanadium, high-cobalt
powder metal HSS-E-PM substrate. Coating consists of low-friction CrC/C
over wear-resistant TiN base layer. Use for tapping titanium and titanium alloys.
S
WS30MG
Surface-treated HSS-E-PM: powder metal HSS-E-PM substrate with nitride surface
treatment that provides wear resistance in non-ferrous materials including titanium.
Limited use. Use for tapping titanium and titanium alloys.
S
WU32MG
Coated HSS-E-PM, PVD heat- and wear-resistant high-vanadium cobalt
powder metal HSS substrate coated with wear-resistant TiCN base layer.
S
WS39MG
Surface-treated HSS-E-PM powder metal HSS-E substrate with oxide/nitride
surface treatment that provides wear resistance in nickel alloys.
S
WP31MG
Coated HSS-E-PM, PVD powder metal HSS-E substrate with TiN coating.
Use for tapping steel 32–44 HRC and for forming threads in steel up to 32 HRC.
P
Coatings are designed for
optimised tapping performance
in specifi c materials.
Grade
PSteel
MStainless Steel
KCast Iron
NNon-Ferrous
SHigh-Temp Alloys
HHardened Materials
WID_Master16_Taps_X006_X007_Metric_REBRAND.indd 7 10/30/15 3:01 PM
X8
LViWID M 16 T X008 X009 M i REBRAND O b 23 2015 9 48 AM
widia.com
High-Performance Taps
Grades and Grade Descriptions
Coatings are designed for
optimised tapping performance
in specifi c materials.
Grade
wear
resistance toughness
Coating Grade Description 05 10 15 20 25 30 35 40 45
WS32MG
Coated HSS-E-PM, PVD heat- and wear-resistant high-vanadium cobalt powder metal
HSS substrate with high-hardness TiCN coating. Use when tapping heat-treated steel
44–55 HRC and cobalt- or nickel-based heat-resistant alloys.
S
H
WN35MG
Coated HSS-E-PM, PVD powder metal HSS-E substrate with two-layer coating.
TiN base layer and DLC top layer that resists galling of non-ferrous materials
to the tap. Use for tapping titanium. Not recommended for steel.
S
WN38MG
Coated HSS-E-PM, PVD powder metal HSS-E substrate with DLC coating.
Use for form tapping aluminium. Not recommended for steel. N
WN44EG
High-vanadium HSS-E substrate with a coating consists of low friction
CrC/C over wear-resistant TiN base layer. Use for tapping stainless steel
and non-ferrous materials. N
WP42EG
Coated HSS-E substrate with TiCN PVD layer. Use in multiple applications, including
steel, stainless steel, ductile cast iron, and cast aluminium. WP42EG is more abrasion-
resistant than WU41EG.
P
M
K
N
PSteel
MStainless Steel
KCast Iron
NNon-Ferrous
SHigh-Temp Alloys
HHardened Materials
WID_Master16_Taps_X008_X009_Metric_REBRAND.indd 8 10/30/15 3:02 PM
X9
LViWID M 16 T X008 X009 M i REBRANDO b 23 20159 48AM
widia.com
High-Performance Taps
Grades and Grade Descriptions
Coatings are designed for
optimised tapping performance
in specifi c materials.
Grade
PSteel
MStainless Steel
KCast Iron
NNon-Ferrous
SHigh-Temp Alloys
HHardened Materials
wear
resistance toughness
Coating Grade Description 05 10 15 20 25 30 35 40 45
WU41EG
Coated HSS-E substrate with TiN PVD layer. Use in multiple applications, including
steel, stainless steel, ductile cast iron, and cast aluminium.
P
M
K
N
WP49EG
HSS-E substrate with black oxide surface treatment. Use in a variety of materials,
including steel, stainless steel, and ductile iron. Not recommended for non-ferrous
materials.
P
M
K
WU40EG
Uncoated HSS-E grade with bright surface. Use in easy-to-machine,
general-purpose applications.
P
M
K
N
WN48EG
Coated HSS-E, PVD lower vanadium HSS-E substrate with DLC coating.
Use for tapping non-ferrous materials with low cutting temperatures like
wrought aluminium. Not recommended for steel. N
WID_Master16_Taps_X008_X009_Metric_REBRAND.indd 9 10/30/15 3:02 PM
LViWID M 16 T Y000 Y001 M i REBRAND N b 2 2015 11 21 AM
1
WID_Master16_Taps_Y000_Y001_Metric_REBRAND.indd 1 11/2/15 11:22 AM
Y1
LViWID M 16 T Y000 Y001 M i REBRANDN b 2 201511 21AM
widia.com
Spiral-Point and Left-Hand Spiral-Flute Taps ....................................................................................................Y2–Y17
High-Performance Victory HSS-E-PM Taps ..............................................................................................Y4–Y10
Multipurpose VariTap ...............................................................................................................................Y11–Y17
Spiral-Flute Taps .................................................................................................................................................Y18–Y42
High-Performance Victory HSS-E-PM Taps ............................................................................................Y20–Y34
Multipurpose VariTap ...............................................................................................................................Y35–Y42
Straight-Flute Taps ..............................................................................................................................................Y44–Y56
High-Performance Victory Solid Carbide Taps ........................................................................................Y46–Y51
High-Performance Victory HSS-E-PM Taps ............................................................................................Y52–Y56
Forming Taps .......................................................................................................................................................Y58–Y63
High-Performance Victory Solid Carbide Taps ........................................................................................Y60–Y61
High-Performance Victory HSS-E-PM Taps ............................................................................................Y62–Y63
Thread Mills..........................................................................................................................................................Y64–Y83
High-Performance Taps Application Data ........................................................................................................Y84–Y86
Technical Information .......................................................................................................................................Y88–Y115
Tapping Portfolio
WID_Master16_Taps_Y000_Y001_Metric_REBRAND.indd 1 11/2/15 11:22 AM
Y2
LViWID M 16 T Y002 Y003 M i REBRAND O b 23 2015 9 49 AM
widia.com
WIDIA-GTD™ offers a wide range of options for tapping through holes in:
• Steel and steel alloys.
• Stainless steel.
• Cast iron.
• Wrought and cast aluminium.
• Nickel-based alloys.
• Titanium alloys.
Spiral-Point and
Left-Hand Spiral-Flute
Solutions for Through Hole Applications •
WIDIA-GTD™
WID_Master16_Taps_Y002_Y003_Metric_REBRAND.indd 2 10/30/15 3:03 PM
Y3
LViWID M 16 T Y002 Y003 M i REBRANDO b 23 20159 49AM
widia.com
High-Performance Victory™ HSS-E-PM Taps
• Left-hand spiral flutes to push chips ahead in through holes.
• Manufactured from powdered metal high-speed steel coated for thread
cutting in various applications.
• Offer performance advantages over conventional high-speed steel taps.
• Long tap life at up to 50% higher tapping speed than HSS taps.
• PVD coatings offer outstanding thermal stability, hot hardness, oxidation
resistance, and low coefficient of friction.
• Low runout of thread and chamfer.
• Excellent chip control.
• Reliable performance.
• Exceptional thread quality.
Multipurpose VariTap™
• Unique spiral-point geometry provides low tapping torque while pushing
chips ahead of the tap in through holes.
• Manufactured from high-vanadium HSS-E to provide long and
consistent life.
• Ideal for customers who have a variety of materials to machine.
• Geometry designed to allow tapping of a wide variety of ductile
materials: carbon and alloy steels, stainless steels, ductile iron, and
cast aluminium.
• Wide range of inch and metric standard sizes, pitch diameter limits,
classes of fit, chamfer styles, and coatings.
WID_Master16_Taps_Y002_Y003_Metric_REBRAND.indd 3 10/30/15 3:03 PM
Y4
LViWID M 16 T Y004 Y005 M i REBRAND O b 23 2015 9 50 AM
widia.com
GP6520 GM6515
High-Performance Taps
Victory™ Left-Hand Spiral-Flute HSS-E-PM Taps • Through Holes
GT20 • Form D Plug Chamfer • Metric DIN 371, 374, and 376 • For Steel and Stainless Steel
grade GP6520
TiCN
order # catalogue #
grade GM6515
TiN+CrC/C
order # catalogue # D1 size L L3 L2 D
number
of flutes
dimension
standard
class
of fit
3955084 GT205094 3955047 GT205077 M3 X 0,5 56 8 18 3,5 2 DIN 371 6HX
3955085 GT205095 3955048 GT205078 M4 X 0,7 63 10 21 4,5 2 DIN 371 6HX
3955086 GT205096 3955049 GT205079 M5 X 0,8 70 10 25 6,0 2 DIN 371 6HX
3955087 GT205097 3955050 GT205080 M6 X 1 80 10 30 6,0 3 DIN 371 6HX
3955124 GT205104 3955077 GT205087 M8 X 1 90 13 35 6,0 3 DIN 374 6HX
3955088 GT205098 3955051 GT205081 M8 X 1,25 90 13 35 8,0 3 DIN 371 6HX
3955125 GT205105 3955078 GT205088 M10 X 1 90 10 35 7,0 3 DIN 374 6HX
3955126 GT205106 3955079 GT205089 M10 X 1,25 100 15 39 7,0 3 DIN 374 6HX
3955089 GT205099 3955052 GT205082 M10 X 1,5 100 15 39 10,0 3 DIN 371 6HX
3955127 GT205107 3955080 GT205090 M12 X 1,5 100 15 39 9,0 3 DIN 374 6HX
3955090 GT205100 3955073 GT205083 M12 X 1,75 110 18 44 9,0 3 DIN 376 6HX
3955128 GT205108 3955081 GT205091 M14 X 1,5 100 15 47 11,0 4 DIN 374 6HX
3955091 GT205101 3955074 GT205084 M14 X 2 110 20 52 11,0 4 DIN 376 6HX
3955129 GT205109 3955082 GT205092 M16 X 1,5 100 15 46 12,0 4 DIN 374 6HX
3955092 GT205102 3955075 GT205085 M16 X 2 110 20 51 12,0 4 DIN 376 6HX
3955130 GT205110 3955083 GT205093 M18 X 1,5 110 15 50 14,0 4 DIN 374 6HX
3955123 GT205103 3955076 GT205086 M20 X 2,5 140 25 64 16,0 4 DIN 376 6HX
4033723 GT205111 – M24 X 3 160 30 77 18,0 5 DIN 376 6HX
4033725 GT205113 – M30 X 3,5 180 35 91 22,0 5 DIN 376 6HX
4033726 GT205114 – M33 X 3,5 180 35 100 25,0 5 DIN 376 6HX
4033728 GT205116 – M36 X 4 200 40 110 28,0 6 DIN 376 6HX
4033730 GT205118 – M42 X 4,5 200 45 120 32,0 6 DIN 376 6HX
• GM6515 TiN + CrC/C for
stainless steel.
• GP6520 TiCN for steel.
rst choice
alternate choice
metric dimensions
High-Performance Taps
Shank Tolerance
D mm tolerance h6
>3–6 +0, -0,008
>6–10 +0, -0,009
>10–18 +0, -0,011
>18–30 +0, -0,013
>30–50 +0, -0,016
WID_Master16_Taps_Y004_Y005_Metric_REBRAND.indd 4 10/30/15 3:03 PM
Y5
LViWID M 16 T Y004 Y005 M i REBRANDO b 23 20159 50AM
widia.com
GP6520
High-Performance Taps
Victory™ Left-Hand Spiral-Flute HSS-E-PM Taps • Through Holes
GT20 • Form D Plug Chamfer • Larger Sizes • Metric Extra Long • For Steel and Cast Iron
grade GP6520
TiCN
order # catalogue # D1 size L L3 L2 D
number
of flutes
class
of fit
4033765 GT205122 M24 X 3 200 30 120 18,0 5 6HX
4033767 GT205124 M30 X 3,5 250 35 150 22,0 5 6HX
4033768 GT205125 M33 X 3,5 250 35 150 25,0 5 6HX
4033770 GT205127 M36 X 4 250 40 150 28,0 6 6HX
4033772 GT205129 M42 X 4,5 300 45 180 32,0 6 6HX
• GP6520 TiCN for steel
and cast iron.
rst choice
alternate choice
metric dimensions
High-Performance Taps
Shank Tolerance
D mm tolerance h6
12–18 +0, -0,011
20–30 +0, -0,013
32–36 +0, -0,016
WID_Master16_Taps_Y004_Y005_Metric_REBRAND.indd 5 10/30/15 3:03 PM
Y6
LViWID M 16 T Y006 Y007 M i REBRAND O b 23 2015 9 50 AM
widia.com
GP6520 GM6515
High-Performance Taps
Victory™ Left-Hand Spiral-Flute HSS-E-PM Taps • Through Holes
Shank Tolerance
D mm tolerance h6
>3–6 +0, -0,008
>6–10 +0, -0,009
>10–18 +0, -0,011
>18–30 +0, -0,013
>30–50 +0, -0,016
GT21 • Form D Plug Chamfer • Through Coolant • Metric DIN 371 and 376 • For Steel and Stainless Steel
grade GP6520
TiCN
order # catalogue #
grade GM6515
TiN+CrC/C
order # catalogue # D1 size L L3 L2 D
number
of flutes
dimension
standard
class
of fit
3955054 GT215007 3955038 GT215001 M5 X 0,8 70 10 25 6,0 2 DIN 371 6HX
3955055 GT215008 3955039 GT215002 M6 X 1 80 10 30 6,0 3 DIN 371 6HX
3955056 GT215009 3955040 GT215003 M8 X 1,25 90 13 35 8,0 3 DIN 371 6HX
3955057 GT215010 3955041 GT215004 M10 X 1,5 100 15 39 10,0 3 DIN 371 6HX
3955058 GT215011 3955042 GT215005 M12 X 1,75 110 18 44 9,0 3 DIN 376 6HX
3955059 GT215012 3955053 GT215006 M14 X 2 110 20 52 11,0 4 DIN 376 6HX
High-Performance Taps
• GM6515 TiN + CrC/C for
stainless steel.
• GP6520 TiCN for steel.
rst choice
alternate choice
metric dimensions
WID_Master16_Taps_Y006_Y007_Metric_REBRAND.indd 6 10/30/15 3:03 PM
Y7
LViWID M 16 T Y006 Y007 M i REBRANDO b 23 20159 50AM
widia.com
WS32MG
High-Performance Taps
Victory™ Left-Hand Spiral-Flute HSS-E-PM Taps • Through Holes
GT10 • Form D Plug Chamfer • Metric DIN 371 and 376 • For Nickel and Nickel Alloys
grade WS32MG
TiCN
order # catalogue # D1 size L L3 L2 D
number
of flutes
dimension
standard
class
of fit
4160100 GT105001 M3 X 0,5 56 11 18 3,5 2 DIN 371 6HX
4160101 GT105002 M4 X 0,7 63 13 21 4,5 3 DIN 371 6HX
4160102 GT105003 M5 X 0,8 70 15 25 6,0 3 DIN 371 6HX
4160103 GT105004 M6 X 1 80 17 30 6,0 3 DIN 371 6HX
4160104 GT105005 M8 X 1,25 90 20 35 8,0 3 DIN 371 6HX
4160105 GT105006 M10 X 1,5 100 22 39 10,0 3 DIN 371 6HX
4160106 GT105007 M12 X 1,75 110 24 — 9,0 3 DIN 376 6HX
4160107 GT105008 M14 X 2 110 26 — 11,0 3 DIN 376 6HX
4160108 GT105009 M16 X 2 110 27 — 12,0 3 DIN 376 6HX
4160109 GT105010 M20 X 2,5 140 32 — 16,0 3 DIN 376 6HX
• WS32MG TiCN for nickel
and nickel alloys.
rst choice
alternate choice
metric dimensions
Shank Tolerance
D mm tolerance h9
1–3 +0, -0,025
>3–6 +0, -0,030
>6–10 +0, -0,036
>10–18 +0, -0,043
>18–30 +0, -0,052
High-Performance Taps
WID_Master16_Taps_Y006_Y007_Metric_REBRAND.indd 7 10/30/15 3:03 PM
Y8
LViWID M 16 T Y008 Y009 M i REBRAND O b 23 2015 9 50 AM
widia.com
WN35MG
High-Performance Taps
Victory™ Spiral-Point Plug HSS-E-PM Taps • Through Holes
Shank Tolerance
D mm tolerance h9
1–3 +0, -0,025
>3–6 +0, -0,030
>6–10 +0, -0,036
>10–18 +0, -0,043
>18–30 +0, -0,052
GT14 • Form B Plug Chamfer • Metric DIN 371 and 376 • For Titanium and Titanium Alloys
grade WN35MG
TiN/DLC
order # catalogue # D1 size L L3 L2 D
number
of flutes
dimension
standard
class
of fit
4160093 GT145001 M3 X 0,5 56 11 18 3,5 3 DIN 371 6HX
4160094 GT145002 M4 X 0,7 63 13 21 4,5 3 DIN 371 6HX
4160095 GT145003 M5 X 0,8 70 15 25 6,0 3 DIN 371 6HX
4160096 GT145004 M6 X 1 80 17 30 6,0 3 DIN 371 6HX
4160097 GT145005 M8 X 1,25 90 20 35 8,0 3 DIN 371 6HX
4160098 GT145006 M10 X 1,5 100 22 39 10,0 3 DIN 371 6HX
4160099 GT145007 M12 X 1,75 110 24 — 9,0 3 DIN 376 6HX
High-Performance Taps
• WN35MG TiN/DLC for titanium
and titanium alloys.
rst choice
alternate choice
metric dimensions
WID_Master16_Taps_Y008_Y009_Metric_REBRAND.indd 8 10/30/15 3:03 PM
Y9
LViWID M 16 T Y008 Y009 M i REBRANDO b 23 20159 50AM
widia.com
WN48EG
High-Performance Taps
Victory™ Spiral-Point Plug HSS-E-PM Taps • Through Holes
Shank Tolerance
D mm tolerance h9
1–3 +0, -0,025
3,5–6 +0, -0,030
7–10 +0, -0,036
11–18 +0, -0,043
GT70 • Form B Plug Chamfer • Metric DIN 371 and 376 • For Aluminium
grade WN48EG
DLC
order # catalogue # D1 size L L3 L2 D
number
of flutes
dimension
standard
class
of fit
4160036 GT705001 M3 X 0,5 56 11 18 3,5 2 DIN 371 6H
4160037 GT705002 M4 X 0,7 63 13 21 4,5 2 DIN 371 6H
4160038 GT705003 M5 X 0,8 70 15 25 6,0 2 DIN 371 6H
4160039 GT705004 M6 X 1 80 17 30 6,0 2 DIN 371 6H
4160040 GT705005 M8 X 1,25 90 20 35 8,0 2 DIN 371 6H
4160041 GT705006 M10 X 1,5 100 22 39 10,0 2 DIN 371 6H
4160042 GT705007 M12 X 1,75 110 24 — 9,0 3 DIN 376 6H
4160063 GT705008 M16 X 2 110 27 — 12,0 3 DIN 376 6H
High-Performance Taps
• WN48EG DLC for aluminium.
rst choice
alternate choice
metric dimensions
WID_Master16_Taps_Y008_Y009_Metric_REBRAND.indd 9 10/30/15 3:03 PM
Y10
LViWID M 16 T Y010 Y011 M i REBRAND O b 23 2015 9 50 AM
widia.com
WP31MG
High-Performance Taps
Victory™ Spiral-Point Plug HSS-E-PM Taps • Through Holes
GT00 • Form B Plug Chamfer • Metric DIN 371, 374, and 376 • For Hard Steel
grade WP31MG
TiN
order # catalogue # D1 size L L3 L2 D
number
of flutes
dimension
standard
class
of fit
4153679 GT005001 M3 X 0,5 56 11 18 3,5 2 DIN 371 6HX
4153680 GT005002 M4 X 0,7 63 13 21 4,5 2 DIN 371 6HX
4153681 GT005003 M5 X 0,8 70 15 25 6,0 2 DIN 371 6HX
4153682 GT005004 M6 X 1 80 17 30 6,0 3 DIN 371 6HX
4153760 GT005012 M8 X 1 90 17 — 6,0 3 DIN 374 6HX
4153753 GT005005 M8 X 1,25 90 20 35 8,0 3 DIN 371 6HX
4153761 GT005013 M10 X 1 90 18 — 7,0 3 DIN 374 6HX
4153762 GT005014 M10 X 1,25 100 22 — 7,0 3 DIN 374 6HX
4153754 GT005006 M10 X 1,5 100 22 39 10,0 3 DIN 371 6HX
4153763 GT005015 M12 X 1,25 100 22 — 9,0 3 DIN 374 6HX
4153764 GT005016 M12 X 1,5 100 22 — 9,0 3 DIN 374 6HX
4153755 GT005007 M12 X 1,75 110 24 — 9,0 3 DIN 376 6HX
4153765 GT005017 M14 X 1,5 100 22 — 11,0 3 DIN 374 6HX
4153756 GT005008 M14 X 2 110 26 — 11,0 3 DIN 376 6HX
4153766 GT005018 M16 X 1,5 100 22 — 12,0 4 DIN 374 6HX
4153757 GT005009 M16 X 2 110 27 — 12,0 4 DIN 376 6HX
4153758 GT005010 M18 X 2 125 30 — 14,0 4 DIN 376 6HX
4153759 GT005011 M20 X 2,5 140 32 — 16,0 4 DIN 376 6HX
• WP31MG TiN for steel
32–44 HRC.
rst choice
alternate choice
metric dimensions
Shank Tolerance
D mm tolerance h9
1–3 +0, -0,025
>3–6 +0, -0,030
>6–10 +0, -0,036
>10–18 +0, -0,043
>18–30 +0, -0,052
High-Performance Taps
WID_Master16_Taps_Y010_Y011_Metric_REBRAND.indd 10 10/30/15 3:03 PM
Y11
LViWID M 16 T Y010 Y011 M i REBRANDO b 23 20159 50AM
widia.com
WU41EG WP49EG
3–5
Multipurpose Taps
VariTap™ Spiral-Point HSS-E Taps • Through Holes
VT-SPO • Form B Plug Chamfer • Machine Screw and Fractional • DIN 371 and 376
grade WU41EG
TiN
order # catalogue #
grade WP49EG
Oxide
order # catalogue # D1 size L L3 L2 D
number
of flutes
dimension
standard
class
of fit
5472633 VTSPO6005 5387704 VTSPO6005 4 - 40 56 8 18 3,5 2 DIN 371 2B
5472635 VTSPO6007 5387707 VTSPO6007 5 - 40 56 9 20 4,0 2 DIN 371 2B
5472636 VTSPO6008 5387708 VTSPO6008 6 - 32 56 9 20 4,0 2 DIN 371 2B
5472638 VTSPO6010 5387760 VTSPO6010 6 - 40 56 9 20 4,0 2 DIN 371 2B
5472639 VTSPO6011 5387761 VTSPO6011 8 - 32 63 11 21 4,5 2 DIN 371 2B
5472641 VTSPO6013 5387763 VTSPO6013 10 - 24 70 12 25 6,0 2 DIN 371 2B
5472644 VTSPO6014 5387764 VTSPO6014 10 - 32 70 12 25 6,0 2 DIN 371 2B
5472646 VTSPO6016 5387766 VTSPO6016 1/4 - 20 80 15 30 7,0 3 DIN 371 2B
5472647 VTSPO6017 5387767 VTSPO6017 1/4 - 28 80 15 30 7,0 3 DIN 371 2B
5472649 VTSPO6019 5387769 VTSPO6019 5/16 - 18 90 15 35 8,0 3 DIN 371 2B
5472650 VTSPO6020 5387770 VTSPO6020 5/16 - 24 90 15 35 8,0 3 DIN 371 2B
5472652 VTSPO6022 5387772 VTSPO6022 3/8 - 16 100 19 39 10,0 3 DIN 371 2B
5472653 VTSPO6023 5387773 VTSPO6023 3/8 - 24 100 19 39 10,0 3 DIN 371 2B
5472655 VTSPO6025 5387776 VTSPO6025 7/16 - 14 100 18 41 8,0 3 DIN 376 2B
5472656 VTSPO6026 5387777 VTSPO6026 7/16 - 20 100 18 41 8,0 3 DIN 376 2B
5472658 VTSPO6028 5387779 VTSPO6028 1/2 - 13 110 23 47 9,0 3 DIN 376 2B
5472659 VTSPO6029 5387780 VTSPO6029 1/2 - 20 110 23 47 9,0 3 DIN 376 2B
5472661 VTSPO6031 5387782 VTSPO6031 9/16 - 12 110 25 53 11,0 3 DIN 376 2B
5472662 VTSPO6032 5387783 VTSPO6032 9/16 - 18 110 25 53 11,0 3 DIN 376 2B
5472663 VTSPO6033 5387784 VTSPO6033 5/8 - 11 110 24 51 12,0 3 DIN 376 2B
• WU41EG TiN
• WP49EG oxide
rst choice
alternate choice
metric dimensions
Shank Tolerance
D mm tolerance h9
1–3 +0, -0,025
>3–6 +0, -0,030
>6–10 +0, -0,036
>10–18 +0, -0,043
>18–30 +0, -0,052
Multipurpose Taps
(continued)
WID_Master16_Taps_Y010_Y011_Metric_REBRAND.indd 11 10/30/15 3:03 PM
Y12
LViWID M 16 T Y012 Y013 M i REBRAND O b 23 2015 9 50 AM
widia.com
WU41EG WP49EG
Multipurpose Taps
VariTap™ Spiral-Point HSS-E Taps • Through Holes
grade WU41EG
TiN
order # catalogue #
grade WP49EG
Oxide
order # catalogue # D1 size L L3 L2 D
number
of flutes
dimension
standard
class
of fit
5472664 VTSPO6034 5387785 VTSPO6034 5/8 - 18 110 24 51 12,0 3 DIN 376 2B
5472665 VTSPO6035 5387786 VTSPO6035 3/4 - 10 140 30 64 16,0 3 DIN 376 2B
5472666 VTSPO6036 5387787 VTSPO6036 3/4 - 16 140 30 64 16,0 3 DIN 376 2B
5472667 VTSPO6037 5387788 VTSPO6037 7/8 - 9 140 34 71 18,0 3 DIN 376 2B
5472668 VTSPO6038 5387789 VTSPO6038 7/8 - 14 140 34 71 18,0 3 DIN 376 2B
5472669 VTSPO6039 5387790 VTSPO6039 1 - 8 160 38 81 18,0 3 DIN 376 2B
5472670 VTSPO6040 5387791 VTSPO6040 1 - 12 160 38 81 18,0 3 DIN 376 2B
rst choice
alternate choice
metric dimensions
Multipurpose Taps
(VT-SPO • Form B Plug Chamfer • Machine Screw and Fractional • DIN 371 and 376 — continued)
WID_Master16_Taps_Y012_Y013_Metric_REBRAND.indd 12 10/30/15 3:03 PM
Y13
LViWID M 16 T Y012 Y013 M i REBRANDO b 23 20159 50AM
widia.com
WU41EG WP49EG
3–5
Multipurpose Taps
VariTap™ Spiral-Point HSS-E Taps • Through Holes
Shank Tolerance
D mm tolerance h9
1–3 +0, -0,025
>3–6 +0, -0,030
>6–10 +0, -0,036
>10–18 +0, -0,043
>18–30 +0, -0,052
VT-SPO • Form B Plug Chamfer • UNJC/UNJF • Inch DIN 371 and 376
grade WU41EG
TiN
order # catalogue #
grade WP49EG
Oxide
order # catalogue # D1 size L L3 L2 D
number
of flutes
dimension
standard
class
of fit
5472634 VTSPO6006 5387705 VTSPO6006 4 - 40 56 8 18 3,5 2 DIN 371 3B
5472637 VTSPO6009 5387709 VTSPO6009 6 - 32 56 9 20 4,0 2 DIN 371 3B
5472640 VTSPO6012 5387762 VTSPO6012 8 - 32 63 11 21 4,5 2 DIN 371 3B
5472645 VTSPO6015 5387765 VTSPO6015 10 - 32 70 12 25 6,0 2 DIN 371 3B
5472648 VTSPO6018 5387768 VTSPO6018 1/4 - 28 80 15 30 7,0 3 DIN 371 3B
5472651 VTSPO6021 5387771 VTSPO6021 5/16 - 24 90 15 35 8,0 3 DIN 371 3B
5472654 VTSPO6024 5387774 VTSPO6024 3/8 - 24 100 19 39 10,0 3 DIN 371 3B
5472657 VTSPO6027 5387778 VTSPO6027 7/16 - 20 100 18 41 8,0 3 DIN 376 3B
5472660 VTSPO6030 5387781 VTSPO6030 1/2 - 20 110 23 47 9,0 3 DIN 376 3B
Multipurpose Taps
• WU41EG TiN
• WP49EG oxide
rst choice
alternate choice
metric dimensions
WID_Master16_Taps_Y012_Y013_Metric_REBRAND.indd 13 10/30/15 3:03 PM
Y14
LViWID M 16 T Y014 Y015 M i REBRAND O b 23 2015 9 50 AM
widia.com
WP42EG WU41EG WP49EG WU40EG
3–5
Multipurpose Taps
VariTap™ Spiral-Point HSS-E Taps • Through Holes
VT-SPO • Form B Plug Chamfer • Metric DIN 371, 374, and 376
grade WP42EG
TiCN
order # catalogue #
grade WU41EG
TiN
order # catalogue #
grade WP49EG
Oxide
order # catalogue #
grade WU40EG
Bright
order # catalogue # D1 size L L3 L2 D
number
of flutes
dimension
standard
class
of fit
5366647 VTSPO6505 5366646 VTSPO6505 5366648 VTSPO6505 5366649 VTSPO6505 M2 X 0,4 45 7 13 2,8 2 DIN 371 6H
– – 5366660 VTSPO6506 – M2 X 0,4 45 7 13 2,8 2 DIN 371 6G
– – 5366661 VTSPO6507 – M2,2 X 0,45 45 7 13 2,8 2 DIN 371 6H
– 5366662 VTSPO6508 5366663 VTSPO6508 5366664 VTSPO6508 M2,5 X 0,45 50 7 15 2,8 2 DIN 371 6H
– – 5366665 VTSPO6509 – M2,5 X 0,45 50 7 15 2,8 2 DIN 371 6G
– – 5368602 VTSPO6545 5368603 VTSPO6545 M3 X 0,35 56 8 — 2,2 2 DIN 374 6H
– 5368514 VTSPO6525 5368515 VTSPO6525 5368516 VTSPO6525 M3 X 0,5 56 8 — 2,2 2 DIN 376 6H
– – 5366670 VTSPO6511 – M3 X 0,5 56 8 18 3,5 2 DIN 371 6G
5366667 VTSPO6510 5366666 VTSPO6510 5366668 VTSPO6510 5366669 VTSPO6510 M3 X 0,5 56 8 18 3,5 2 DIN 371 6H
– 5366671 VTSPO6512 5366673 VTSPO6512 5366674 VTSPO6512 M3,5 X 0,6 56 9 20 4,0 2 DIN 371 6H
– – 5368604 VTSPO6546 5368605 VTSPO6546 M4 X 0,5 63 10 21 2,8 2 DIN 374 6H
– 5368517 VTSPO6526 5368518 VTSPO6526 5368519 VTSPO6526 M4 X 0,7 63 10 21 2,8 2 DIN 376 6H
– – 5366679 VTSPO6514 – M4 X 0,7 63 11 21 4,5 2 DIN 371 6G
5366676 VTSPO6513 5366675 VTSPO6513 5366677 VTSPO6513 5366678 VTSPO6513 M4 X 0,7 63 11 21 4,5 2 DIN 371 6H
– – 5368606 VTSPO6547 5368607 VTSPO6547 M5 X 0,5 70 12 25 3,5 2 DIN 374 6H
– 5368540 VTSPO6527 5368541 VTSPO6527 5368542 VTSPO6527 M5 X 0,8 70 12 25 3,5 2 DIN 376 6H
– – 5366685 VTSPO6516 – M5 X 0,8 70 12 25 6,0 2 DIN 371 6G
5366681 VTSPO6515 5366680 VTSPO6515 5366682 VTSPO6515 5366684 VTSPO6515 M5 X 0,8 70 12 25 6,0 2 DIN 371 6H
– – 5368608 VTSPO6548 5368609 VTSPO6548 M6 X 0,5 80 12 30 4,5 3 DIN 374 6H
– – 5368610 VTSPO6549 5368611 VTSPO6549 M6 X 0,75 80 12 30 4,5 3 DIN 374 6H
– 5368543 VTSPO6528 5368544 VTSPO6528 5368545 VTSPO6528 M6 X 1 80 12 30 4,5 3 DIN 376 6H
5366687 VTSPO6517 5366686 VTSPO6517 5366688 VTSPO6517 5366689 VTSPO6517 M6 X 1 80 12 30 6,0 3 DIN 371 6H
– – 5366690 VTSPO6518 – M6 X 1 80 12 30 6,0 3 DIN 371 6G
– – 5368612 VTSPO6550 5368613 VTSPO6550 M7 X 0,75 80 12 30 5,5 3 DIN 374 6H
• WU40EG bright
• WU41EG TiN
• WP42EG TiCN
• WP49EG oxide
rst choice
alternate choice
metric
dimensions
Shank Tolerance
D mm tolerance h9
1–3 +0, -0,025
>3–6 +0, -0,030
>6–10 +0, -0,036
>10–18 +0, -0,043
>18–30 +0, -0,052
Multipurpose Taps
(continued)
WID_Master16_Taps_Y014_Y015_Metric_REBRAND.indd 14 10/30/15 3:03 PM
Y15
LViWID M 16 T Y014 Y015 M i REBRANDO b 23 20159 50AM
widia.com
WP42EG WU41EG WP49EG WU40EG metric
dimensions
Multipurpose Taps
grade WP42EG
TiCN
order # catalogue #
grade WU41EG
TiN
order # catalogue #
grade WP49EG
Oxide
order # catalogue #
grade WU40EG
Bright
order # catalogue # D1 size L L3 L2 D
number
of flutes
dimension
standard
class
of fit
5366693 VTSPO6519 5366692 VTSPO6519 5366695 VTSPO6519 5366696 VTSPO6519 M7 X 1 80 12 30 7,0 3 DIN 371 6H
– – 5366697 VTSPO6520 – M7 X 1 80 12 30 7,0 3 DIN 371 6G
– – 5368614 VTSPO6551 5368615 VTSPO6551 M8 X 0,75 80 12 30 6,0 3 DIN 374 6H
– – 5368616 VTSPO6552 5368617 VTSPO6552 M8 X 1 90 15 35 6,0 3 DIN 374 6H
– 5368546 VTSPO6529 5368547 VTSPO6529 5368548 VTSPO6529 M8 X 1,25 90 15 35 6,0 3 DIN 376 6H
5366700 VTSPO6521 5366698 VTSPO6521 5366701 VTSPO6521 5366703 VTSPO6521 M8 X 1,25 90 15 35 8,0 3 DIN 371 6H
– – 5366704 VTSPO6522 – M8 X 1,25 90 15 35 8,0 3 DIN 371 6G
– – 5368618 VTSPO6553 5368619 VTSPO6553 M10 X 0,75 90 15 35 7,0 3 DIN 374 6H
– – 5368620 VTSPO6554 5368621 VTSPO6554 M10 X 1 90 15 35 7,0 3 DIN 374 6H
– – 5368622 VTSPO6555 5368623 VTSPO6555 M10 X 1,25 100 18 39 7,0 3 DIN 374 6H
– – 5366709 VTSPO6524 – M10 X 1,5 100 18 39 10,0 3 DIN 371 6G
5366706 VTSPO6523 5366705 VTSPO6523 5366707 VTSPO6523 5366708 VTSPO6523 M10 X 1,5 100 18 39 10,0 3 DIN 371 6H
– 5368549 VTSPO6530 5368550 VTSPO6530 5368551 VTSPO6530 M10 X 1,5 100 18 39 7,0 3 DIN 376 6H
– – 5368624 VTSPO6556 5368625 VTSPO6556 M11 X 1 90 15 36 8,0 3 DIN 374 6H
– – 5368626 VTSPO6557 5368627 VTSPO6557 M12 X 1 100 21 39 9,0 3 DIN 374 6H
– – 5368628 VTSPO6558 5368629 VTSPO6558 M12 X 1,25 100 21 39 9,0 3 DIN 374 6H
– – 5368630 VTSPO6559 5368631 VTSPO6559 M12 X 1,5 100 21 39 9,0 3 DIN 374 6H
– – 5368556 VTSPO6532 – M12 X 1,75 110 21 44 9,0 3 DIN 376 6G
5368553 VTSPO6531 5368552 VTSPO6531 5368554 VTSPO6531 5368555 VTSPO6531 M12 X 1,75 110 21 44 9,0 3 DIN 376 6H
– – 5368632 VTSPO6560 5368633 VTSPO6560 M14 X 1 100 21 47 11,0 3 DIN 374 6H
– – 5368634 VTSPO6561 5368635 VTSPO6561 M14 X 1,25 100 21 47 11,0 3 DIN 374 6H
– – 5368636 VTSPO6562 5368637 VTSPO6562 M14 X 1,5 100 21 47 11,0 3 DIN 374 6H
5368558 VTSPO6533 5368557 VTSPO6533 5368559 VTSPO6533 5368560 VTSPO6533 M14 X 2 110 24 52 11,0 3 DIN 376 6H
– – 5368561 VTSPO6534 – M14 X 2 110 24 52 11,0 3 DIN 376 6G
– – 5368638 VTSPO6563 5368639 VTSPO6563 M16 X 1 100 21 46 12,0 3 DIN 374 6H
– – 5368640 VTSPO6564 5368641 VTSPO6564 M16 X 1,5 100 21 46 12,0 3 DIN 374 6H
5368563 VTSPO6535 5368562 VTSPO6535 5368565 VTSPO6535 5368566 VTSPO6535 M16 X 2 110 24 51 12,0 3 DIN 376 6H
– – 5368567 VTSPO6536 – M16 X 2 110 24 51 12,0 3 DIN 376 6G
– – 5368642 VTSPO6565 5368643 VTSPO6565 M18 X 1 110 21 50 14,0 3 DIN 374 6H
– – 5368683 VTSPO6566 5368684 VTSPO6566 M18 X 1,5 110 21 50 14,0 3 DIN 374 6H
– – 5368685 VTSPO6567 5368686 VTSPO6567 M18 X 2 125 30 58 14,0 3 DIN 374 6H
5368569 VTSPO6537 5368568 VTSPO6537 5368570 VTSPO6537 5368571 VTSPO6537 M18 X 2,5 125 30 58 14,0 3 DIN 376 6H
– – 5368687 VTSPO6568 5368688 VTSPO6568 M20 X 1 125 24 56 16,0 3 DIN 374 6H
– – 5368689 VTSPO6569 5368690 VTSPO6569 M20 X 1,5 125 24 56 16,0 3 DIN 374 6H
– – 5368691 VTSPO6570 5368692 VTSPO6570 M20 X 2 140 30 64 16,0 3 DIN 374 6H
5368573 VTSPO6538 5368572 VTSPO6538 5368574 VTSPO6538 5368575 VTSPO6538 M20 X 2,5 140 30 64 16,0 3 DIN 376 6H
Multipurpose Taps
VariTap™ Spiral-Point HSS-E Taps • Through Holes
rst choice
alternate choice
(continued)
(VT-SPO • Form B Plug Chamfer • Metric DIN 371, 374, and 376 — continued)
WID_Master16_Taps_Y014_Y015_Metric_REBRAND.indd 15 10/30/15 3:03 PM
Y16
LViWID M 16 T Y016 Y017 M i REBRAND O b 23 2015 9 50 AM
widia.com
WP42EG WU41EG WP49EG WU40EG
Multipurpose Taps
VariTap™ Spiral-Point HSS-E Taps • Through Holes
rst choice
alternate choice
metric
dimensions
Multipurpose Taps
grade WP42EG
TiCN
order # catalogue #
grade WU41EG
TiN
order # catalogue #
grade WP49EG
Oxide
order # catalogue #
grade WU40EG
Bright
order # catalogue # D1 size L L3 L2 D
number
of flutes
dimension
standard
class
of fit
– – 5368693 VTSPO6571 5368694 VTSPO6571 M22 X 1,5 125 24 62 18,0 3 DIN 374 6H
– – – 5368695 VTSPO6572 M22 X 2 140 30 70 18,0 3 DIN 374 6H
5368577 VTSPO6539 5368576 VTSPO6539 5368578 VTSPO6539 5368579 VTSPO6539 M22 X 2,5 140 30 70 18,0 3 DIN 376 6H
– – 5368696 VTSPO6573 5368697 VTSPO6573 M24 X 1,5 140 28 67 18,0 3 DIN 374 6H
– – – 5368698 VTSPO6574 M24 X 2 140 30 67 18,0 3 DIN 374 6H
5368581 VTSPO6540 5368580 VTSPO6540 5368582 VTSPO6540 5368583 VTSPO6540 M24 X 3 160 36 77 18,0 3 DIN 376 6H
– 5368584 VTSPO6541 5368585 VTSPO6541 5368586 VTSPO6541 M27 X 3 160 36 82 20,0 4 DIN 376 6H
– – – 5368699 VTSPO6575 M30 X 2 150 28 80 22,0 4 DIN 374 6H
– 5368587 VTSPO6542 5368588 VTSPO6542 5368589 VTSPO6542 M30 X 3,5 180 42 91 22,0 4 DIN 376 6H
– – 5368600 VTSPO6543 – M33 X 3,5 180 42 100 25,0 4 DIN 376 6H
– – 5368601 VTSPO6544 – M36 X 4 200 48 110 28,0 4 DIN 376 6H
(VT-SPO • Form B Plug Chamfer • Metric DIN 371, 374, and 376 — continued)
WID_Master16_Taps_Y016_Y017_Metric_REBRAND.indd 16 10/30/15 3:03 PM
Y17
LViWID M 16 T Y016 Y017 M i REBRANDO b 23 20159 50AM
widia.com
WU41EG WU40EG
3–5
Multipurpose Taps
VariTap™ Spiral-Point HSS-E Taps • Through Holes
Shank Tolerance
D mm tolerance h9
1–3 +0, -0,025
>3–6 +0, -0,030
>6–10 +0, -0,036
>10–18 +0, -0,043
>18–30 +0, -0,052
VT-SPO • Form B Plug Chamfer • Metric • JIS
grade WU41EG
TiN
order # catalogue #
grade WU40EG
Bright
order # catalogue # D1 size L L3 L2 D
number
of flutes
dimension
standard
tap
class
5387861 VTSPO7505 5387859 VTSPO7505 M3 X 0,5 46 11 19 4,0 2 JIS ISO 2
5387865 VTSPO7506 5387863 VTSPO7506 M4 X 0,7 52 13 21 5,0 2 JIS ISO 2
5387869 VTSPO7507 5387867 VTSPO7507 M5 X 0,8 60 16 24 5,5 2 JIS ISO 2
5387873 VTSPO7508 5387871 VTSPO7508 M6 X 1 62 19 29 6,0 3 JIS ISO 2
5387877 VTSPO7509 5387875 VTSPO7509 M8 X 1,25 70 22 37 6,2 3 JIS ISO 2
5387881 VTSPO7510 5387879 VTSPO7510 M10 X 1,5 75 24 41 7,0 3 JIS ISO 2
– 5387883 VTSPO7511 M12 X 1,25 82 29 48 8,5 3 JIS ISO 2
– 5387887 VTSPO7513 M12 X 1,5 82 29 48 8,5 3 JIS ISO 2
– 5387885 VTSPO7512 M12 X 1,75 82 29 48 8,5 3 JIS ISO 2
– 5387891 VTSPO7515 M14 X 1,5 88 30 48 10,5 3 JIS ISO 2
– 5387889 VTSPO7514 M14 X 2 88 30 48 10,5 3 JIS ISO 2
– 5387895 VTSPO7517 M16 X 1,5 95 32 52 12,5 3 JIS ISO 2
– 5387893 VTSPO7516 M16 X 2 95 32 52 12,5 3 JIS ISO 2
– 5387898 VTSPO7518 M18 X 2,5 100 37 55 14,0 3 JIS ISO 2
– 5387900 VTSPO7519 M20 X 2,5 105 37 60 15,0 3 JIS ISO 2
Multipurpose Taps
• WU40EG bright
• WU41EG TiN
rst choice
alternate choice
metric dimensions
WID_Master16_Taps_Y016_Y017_Metric_REBRAND.indd 17 10/30/15 3:03 PM
Y18
LViWID M 16 T Y018 Y019 M i REBRAND N b 13 2015 8 57 AM
widia.com
WIDIA-GTD™ offers a wide range of options for tapping blind holes in:
• Steel and steel alloys.
• Stainless steel.
• Cast iron.
• Wrought and cast aluminium.
• Nickel-based alloys.
• Titanium alloys.
Spiral Flute
Solutions for Blind Hole Applications •
WIDIA-GTD™
WID_Master16_Taps_Y018_Y019_Metric_REBRAND.indd 18 11/13/15 9:40 AM
Y19
LViWID M 16 T Y018 Y019 M i REBRANDN b 13 20158 57AM
widia.com
High-Performance Victory™ HSS-E-PM Taps
• Optimised spiral-flute designs enable deep blind holes to be threaded.
• Manufactured from powdered metal high-speed steel coated for thread
cutting in various applications.
• Offer performance advantages over conventional high-speed steel taps.
• Long tap life at up to 50% higher tapping speed than HSS taps.
• PVD coatings offer outstanding thermal stability, hot hardness, oxidation
resistance, and low coefficient of friction.
• Low runout of thread and chamfer.
• Excellent chip control.
• Reliable performance.
• Exceptional thread quality.
Multipurpose VariTap™
• Spiral-flute geometry optimised to provide efficient chip ejection in blind holes.
• Manufactured from high-vanadium HSS-E to provide long and consistent life.
• Ideal for customers who have a variety of materials to machine.
• Geometry designed to allow tapping of a wide variety of ductile materials:
carbon and alloy steels, stainless steels, ductile iron, and cast aluminium.
• Wide range of inch and metric standard sizes, pitch diameter limits,
classes of fit, chamfer styles, and coatings.
WID_Master16_Taps_Y018_Y019_Metric_REBRAND.indd 19 11/13/15 9:40 AM
Y20
LViWID M 16 T Y020 Y021 M i REBRAND O b 23 2015 9 51 AM
widia.com
GP6520 GP6505 GM6515
High-Performance Taps
Victory™ Spiral-Flute HSS-E-PM Taps • Blind Holes
GT30 • Form C Semi-Bottoming Chamfer • Metric DIN 371, 374, and 376 • For Steel and Stainless Steel
grade GP6520
TiCN
order # catalogue #
grade GP6505
Oxide
order # catalogue #
grade GM6515
TiN+CrC/C
order # catalogue # D1 size L L3 L2 D
number
of flutes
dimension
standard
class
of fit
3954929 GT305097 4035066 GT305116 3955098 GT305148 M3 X 0,5 56 8 18 3,5 3 DIN 371 6HX
3954930 GT305098 4035067 GT305117 3955099 GT305079 M4 X 0,7 63 10 21 4,5 3 DIN 371 6HX
3954931 GT305099 4035068 GT305118 3955100 GT305080 M5 X 0,8 70 10 25 6,0 3 DIN 371 6HX
3954932 GT305100 4035069 GT305119 3955101 GT305081 M6 X 1 80 10 30 6,0 3 DIN 371 6HX
3955031 GT305109 – 3955110 GT305090 M8 X 1 90 13 35 6,0 3 DIN 374 6HX
3955023 GT305101 4035070 GT305120 3955102 GT305082 M8 X 1,25 90 13 35 8,0 3 DIN 371 6HX
3955032 GT305110 – 3955111 GT305091 M10 X 1 90 10 35 7,0 3 DIN 374 6HX
3955033 GT305111 – 3955112 GT305092 M10 X 1,25 100 15 39 7,0 3 DIN 374 6HX
3955024 GT305102 4035071 GT305121 3955103 GT305083 M10 X 1,5 100 15 39 10,0 3 DIN 371 6HX
3955034 GT305112 – 3955113 GT305093 M12 X 1,5 100 15 39 9,0 4 DIN 374 6HX
3955025 GT305103 4035072 GT305122 3955104 GT305084 M12 X 1,75 110 18 44 9,0 4 DIN 376 6HX
3955035 GT305113 – 3955114 GT305094 M14 X 1,5 100 15 47 11,0 4 DIN 374 6HX
3955026 GT305104 4035073 GT305123 3955105 GT305085 M14 X 2 110 20 52 11,0 4 DIN 376 6HX
3955036 GT305114 – 3955115 GT305095 M16 X 1,5 100 15 46 12,0 4 DIN 374 6HX
3955027 GT305105 4035074 GT305124 3955106 GT305086 M16 X 2 110 20 51 12,0 4 DIN 376 6HX
3955037 GT305115 – 3955116 GT305096 M18 X 1,5 110 15 50 14,0 4 DIN 374 6HX
3955028 GT305106 – 3955107 GT305087 M18 X 2,5 125 25 58 14,0 4 DIN 376 6HX
3955029 GT305107 – 3955108 GT305088 M22 X 2,5 140 25 70 18,0 4 DIN 376 6HX
3955030 GT305108 – 3955109 GT305089 M24 X 3 160 30 77 18,0 5 DIN 376 6HX
4033733 GT305161 – – M24 X 3 160 30 77 18,0 5 DIN 376 6HX
4033735 GT305163 – – M30 X 3,5 180 35 91 22,0 5 DIN 376 6HX
4033736 GT305164 – – M33 X 3,5 180 35 100 25,0 5 DIN 376 6HX
4033738 GT305166 – – M36 X 4 200 40 110 28,0 5 DIN 376 6HX
4033740 GT305168 – – M42 X 4,5 200 45 120 32,0 5 DIN 376 6HX
• GM6515 TiN + CrC/C for
stainless steel.
• GP6520 TiCN for steel.
• GP6505 oxide for steel.
rst choice
alternate choice
metric dimensions
Shank Tolerance
D mm tolerance h6
>3–6 +0, -0,008
>6–10 +0, -0,009
>10–18 +0, -0,011
>18–30 +0, -0,013
>30–50 +0, -0,016
High-Performance Taps
WID_Master16_Taps_Y020_Y021_Metric_REBRAND.indd 20 10/30/15 3:04 PM
Y21
LViWID M 16 T Y020 Y021 M i REBRANDO b 23 20159 51AM
widia.com
GP6520
High-Performance Taps
Victory™ Spiral-Flute HSS-E-PM Taps • Blind Holes
Shank Tolerance
D mm tolerance h6
12–18 +0, -0,011
20–30 +0, -0,013
32–36 +0, -0,016
GT30 • Form C Semi-Bottoming Chamfer • Larger Sizes • Metric Extra Long • For Steel and Cast Iron
grade GP6520
TiCN
order # catalogue # D1 size L L3 L2 D
number
of flutes
class
of fit
4033776 GT305151 M24 X 3 200 30 120 18,0 5 6HX
4033778 GT305153 M30 X 3,5 250 35 150 22,0 5 6HX
4033779 GT305154 M33 X 3,5 250 35 150 25,0 5 6HX
4033781 GT305156 M36 X 4 250 40 150 28,0 5 6HX
4033783 GT305158 M42 X 4,5 300 45 180 32,0 5 6HX
High-Performance Taps
• GP6520 TiCN for steel
and cast iron.
rst choice
alternate choice
metric dimensions
WID_Master16_Taps_Y020_Y021_Metric_REBRAND.indd 21 10/30/15 3:04 PM
Y22
LViWID M 16 T Y022 Y023 M i REBRAND O b 23 2015 9 51 AM
widia.com
GP6520 GM6515
High-Performance Taps
Victory™ Spiral-Flute HSS-E-PM Taps • Blind Holes
GT31 • Form C Semi-Bottoming Chamfer • Through Coolant • Metric DIN 371 and 376 • For Steel
and Stainless Steel
grade GP6520
TiCN
order # catalogue #
grade GM6515
TiN+CrC/C
order # catalogue # D1 size L L3 L2 D
number
of flutes
dimension
standard
class
of fit
3955349 GT315007 3955343 GT315001 M5 X 0,8 70 10 25 6,0 3 DIN 371 6HX
3955350 GT315008 3955344 GT315002 M6 X 1 80 10 30 6,0 3 DIN 371 6HX
3955351 GT315009 3955345 GT315003 M8 X 1,25 90 13 35 8,0 3 DIN 371 6HX
3955352 GT315010 3955346 GT315004 M10 X 1,5 100 15 39 10,0 3 DIN 371 6HX
3955373 GT315011 3955347 GT315005 M12 X 1,75 110 18 44 9,0 4 DIN 376 6HX
3955374 GT315012 3955348 GT315006 M14 X 2 110 20 52 11,0 4 DIN 376 6HX
5143530 GT315033 – M16 X 2 110 20 51 12,0 4 DIN 376 6HX
5143531 GT315034 – M18 X 2,5 125 25 58 14,0 4 DIN 376 6HX
5143532 GT315035 – M20 X 2,5 140 25 64 16,0 4 DIN 376 6HX
4033744 GT315025 – M24 X 3 160 30 77 18,0 5 DIN 376 6HX
4033746 GT315027 – M30 X 3,5 180 35 91 22,0 5 DIN 376 6HX
4033747 GT315028 – M33 X 3,5 180 35 100 25,0 5 DIN 376 6HX
4033749 GT315030 – M36 X 4 200 40 110 28,0 5 DIN 376 6HX
4033751 GT315032 – M42 X 4,5 200 45 120 32,0 5 DIN 376 6HX
• GM6515 TiN + CrC/C for
stainless steel.
• GP6520 TiCN for steel.
rst choice
alternate choice
metric dimensions
Shank Tolerance
D mm tolerance h6
>3–6 +0, -0,008
>6–10 +0, -0,009
>10–18 +0, -0,011
>18–30 +0, -0,013
>30–50 +0, -0,016
High-Performance Taps
WID_Master16_Taps_Y022_Y023_Metric_REBRAND.indd 22 10/30/15 3:04 PM
Y23
LViWID M 16 T Y022 Y023 M i REBRANDO b 23 20159 51AM
widia.com
GP6520
High-Performance Taps
Victory™ Spiral-Flute HSS-E-PM Taps • Blind Holes
Shank Tolerance
D mm tolerance h6
12–18 +0, -0,011
20–30 +0, -0,013
32–36 +0, -0,016
GT31 • Form C Semi-Bottoming Chamfer • Through Coolant • Larger Sizes • Metric Extra Long • For Steel
and Cast Iron
grade GP6520
TiCN
order # catalogue # D1 size L L3 L2 D
number
of flutes
class
of fit
4033787 GT315014 M24 X 3 200 30 120 18,0 5 6HX
4033789 GT315016 M30 X 3,5 250 35 150 22,0 5 6HX
4033790 GT315017 M33 X 3,5 250 35 150 25,0 5 6HX
4033792 GT315019 M36 X 4 250 40 150 28,0 5 6HX
4033794 GT315021 M42 X 4,5 300 45 180 32,0 5 6HX
High-Performance Taps
• GP6520 TiCN for steel
and cast iron.
rst choice
alternate choice
metric dimensions
WID_Master16_Taps_Y022_Y023_Metric_REBRAND.indd 23 10/30/15 3:04 PM
Y24
LViWID M 16 T Y024 Y025 M i REBRAND O b 23 2015 9 51 AM
widia.com
GP6520
High-Performance Taps
Victory™ Spiral-Flute HSS-E-PM Taps • Threading Close to the Bottom in a Blind Hole
GT32 • Form E Bottoming Chamfer • Metric DIN 371, 374, and 376 • For Steel
grade GP6520
TiCN
order # catalogue # D1 size L L3 L2 D
number
of flutes
dimension
standard
class
of fit
4153906 GT325001 M5 X 0,8 70 10 25 6,0 3 DIN 371 6HX
4153907 GT325002 M6 X 1 80 10 30 6,0 3 DIN 371 6HX
4153908 GT325003 M8 X 1,25 90 13 35 8,0 3 DIN 371 6HX
4153909 GT325004 M10 X 1,5 100 15 39 10,0 3 DIN 371 6HX
4153912 GT325007 M12 X 1,5 100 15 39 9,0 4 DIN 374 6HX
4153910 GT325005 M12 X 1,75 110 18 44 9,0 4 DIN 376 6HX
4153953 GT325008 M14 X 1,5 100 15 47 11,0 4 DIN 374 6HX
4153911 GT325006 M14 X 2 110 20 52 11,0 4 DIN 376 6HX
4153954 GT325009 M16 X 1,5 100 15 46 12,0 4 DIN 374 6HX
• GP6520 TiCN for steel.
rst choice
alternate choice
metric dimensions
Shank Tolerance
D mm tolerance h6
>3–6 +0, -0,008
>6–10 +0, -0,009
>10–18 +0, -0,011
>18–30 +0, -0,013
>30–50 +0, -0,016
High-Performance Taps
WID_Master16_Taps_Y024_Y025_Metric_REBRAND.indd 24 10/30/15 3:04 PM
Y25
LViWID M 16 T Y024 Y025 M i REBRANDO b 23 20159 51AM
widia.com
GP6520
High-Performance Taps
Victory™ Spiral-Flute HSS-E-PM Taps • Threading Close to the Bottom in a Blind Hole
Shank Tolerance
D mm tolerance h6
>3–6 +0, -0,008
>6–10 +0, -0,009
>10–18 +0, -0,011
>18–30 +0, -0,013
>30–50 +0, -0,016
GT33 • Form E Bottoming Chamfer • Through Coolant • Metric DIN 371, 374, and 376 • For Steel
grade GP6520
TiCN
order # catalogue # D1 size L L3 L2 D
number
of flutes
dimension
standard
class
of fit
4153955 GT335001 M5 X 0,8 70 10 25 6,0 3 DIN 371 6HX
4153956 GT335002 M6 X 1 80 10 30 6,0 3 DIN 371 6HX
4153957 GT335003 M8 X 1,25 90 13 35 8,0 3 DIN 371 6HX
4153958 GT335004 M10 X 1,5 100 15 39 10,0 3 DIN 371 6HX
4153961 GT335007 M12 X 1,5 100 15 39 9,0 4 DIN 374 6HX
4153959 GT335005 M12 X 1,75 110 18 44 9,0 4 DIN 376 6HX
4153962 GT335008 M14 X 1,5 100 15 47 11,0 4 DIN 374 6HX
4153960 GT335006 M14 X 2 110 20 52 11,0 4 DIN 376 6HX
4153963 GT335009 M16 X 1,5 100 15 46 12,0 4 DIN 374 6HX
High-Performance Taps
• GP6520 TiCN for steel.
rst choice
alternate choice
metric dimensions
WID_Master16_Taps_Y024_Y025_Metric_REBRAND.indd 25 10/30/15 3:04 PM
Y26
LViWID M 16 T Y026 Y027 M i REBRAND O b 23 2015 9 51 AM
widia.com
GP6520
High-Performance Taps
Victory™ Spiral-Flute HSS-E-PM Taps • Blind Holes
GT50 • Form C Semi-Bottoming Chamfer • Larger Sizes • Metric DIN 376 • For Steel and Cast Iron
grade GP6520
TiCN
order # catalogue # D1 size L L3 L2 D
number
of flutes
dimension
standard
class
of fit
4154254 GT505001 M24 X 3 160 30 77 18,0 4 DIN 376 6HX
4154255 GT505002 M30 X 3,5 180 35 91 22,0 5 DIN 376 6HX
4154256 GT505003 M33 X 3,5 180 35 100 25,0 5 DIN 376 6HX
4154257 GT505004 M36 X 4 200 40 110 28,0 5 DIN 376 6HX
4154258 GT505005 M42 X 4,5 200 45 120 32,0 6 DIN 376 6HX
• GP6520 TiCN for steel
and cast iron.
rst choice
alternate choice
metric dimensions
Shank Tolerance
D mm tolerance h6
12–18 +0, -0,011
20–30 +0, -0,013
32–36 +0, -0,016
High-Performance Taps
WID_Master16_Taps_Y026_Y027_Metric_REBRAND.indd 26 10/30/15 3:04 PM
Y27
LViWID M 16 T Y026 Y027 M i REBRANDO b 23 20159 51AM
widia.com
GP6520
High-Performance Taps
Victory™ Spiral-Flute HSS-E-PM Taps • Blind Holes
Shank Tolerance
D mm tolerance h6
12–18 +0, -0,011
20–30 +0, -0,013
32–36 +0, -0,016
GT50 • Form C Semi-Bottoming Chamfer • Larger Sizes • Metric Extra Long • For Steel and Cast Iron
grade GP6520
TiCN
order # catalogue # D1 size L L3 L2 D
number
of flutes
class
of fit
4154259 GT505006 M24 X 3 200 30 120 18,0 4 6HX
4154260 GT505007 M30 X 3,5 250 35 150 22,0 5 6HX
4154261 GT505008 M33 X 3,5 250 35 150 25,0 5 6HX
4154262 GT505009 M36 X 4 250 40 150 28,0 5 6HX
4154263 GT505010 M42 X 4,5 300 45 180 32,0 6 6HX
High-Performance Taps
• GP6520 TiCN for steel
and cast iron.
rst choice
alternate choice
metric dimensions
WID_Master16_Taps_Y026_Y027_Metric_REBRAND.indd 27 10/30/15 3:04 PM
Y28
LViWID M 16 T Y028 Y029 M i REBRAND O b 23 2015 9 51 AM
widia.com
GP6520
High-Performance Taps
Victory™ Spiral-Flute HSS-E-PM Taps • Blind Holes
GT51 • Form C Semi-Bottoming Chamfer • Through Coolant • Larger Sizes • Metric DIN 376 • For Steel
and Cast Iron
grade GP6520
TiCN
order # catalogue # D1 size L L3 L2 D
number
of flutes
dimension
standard
class
of fit
4154264 GT515001 M24 X 3 160 30 77 18,0 4 DIN 376 6HX
4154265 GT515002 M30 X 3,5 180 35 91 22,0 5 DIN 376 6HX
4154266 GT515003 M33 X 3,5 180 35 100 25,0 5 DIN 376 6HX
4154267 GT515004 M36 X 4 200 40 110 28,0 5 DIN 376 6HX
4154268 GT515005 M42 X 4,5 200 45 120 32,0 6 DIN 376 6HX
• GP6520 TiCN for steel
and cast iron.
rst choice
alternate choice
metric dimensions
Shank Tolerance
D mm tolerance h6
12–18 +0, -0,011
20–30 +0, -0,013
32–36 +0, -0,016
High-Performance Taps
WID_Master16_Taps_Y028_Y029_Metric_REBRAND.indd 28 10/30/15 3:04 PM
Y29
LViWID M 16 T Y028 Y029 M i REBRANDO b 23 20159 51AM
widia.com
GP6520
High-Performance Taps
Victory™ Spiral-Flute HSS-E-PM Taps • Blind Holes
Shank Tolerance
D mm tolerance h6
12–18 +0, -0,011
20–30 +0, -0,013
32–36 +0, -0,016
GT51 • Form C Semi-Bottoming Chamfer • Through Coolant • Larger Sizes • Metric Extra Long • For Steel
and Cast Iron
grade GP6520
TiCN
order # catalogue # D1 size L L3 L2 D
number
of flutes
class
of fit
4154269 GT515006 M24 X 3 200 30 120 18,0 4 6HX
4154270 GT515007 M30 X 3,5 250 35 150 22,0 5 6HX
4154271 GT515008 M33 X 3,5 250 35 150 25,0 5 6HX
4154272 GT515009 M36 X 4 250 40 150 28,0 5 6HX
4154273 GT515010 M42 X 4,5 300 45 180 32,0 6 6HX
High-Performance Taps
• GP6520 TiCN for tapping steel
and cast iron.
rst choice
alternate choice
metric dimensions
WID_Master16_Taps_Y028_Y029_Metric_REBRAND.indd 29 10/30/15 3:04 PM
Y30
LViWID M 16 T Y030 Y031 M i REBRAND O b 23 2015 9 51 AM
widia.com
WS32MG
High-Performance Taps
Victory™ Spiral-Flute HSS-E-PM Taps • Blind Holes
GT12 • Form C Semi-Bottoming Chamfer • Metric DIN 371 and 376 • For Nickel and Nickel Alloys
grade WS32MG
TiCN
order # catalogue # D1 size L L3 L2 D
number
of flutes
dimension
standard
class
of fit
4159636 GT125001 M3 X 0,5 56 11 18 3,5 2 DIN 371 6HX
4159637 GT125002 M4 X 0,7 63 13 21 4,5 3 DIN 371 6HX
4159638 GT125003 M5 X 0,8 70 15 25 6,0 3 DIN 371 6HX
4159639 GT125004 M6 X 1 80 17 30 6,0 3 DIN 371 6HX
4159640 GT125005 M8 X 1,25 90 20 35 8,0 3 DIN 371 6HX
4159641 GT125006 M10 X 1,5 100 22 39 10,0 3 DIN 371 6HX
4159642 GT125007 M12 X 1,75 110 24 — 9,0 3 DIN 376 6HX
4159663 GT125008 M14 X 2 110 26 — 11,0 3 DIN 376 6HX
4159664 GT125009 M16 X 2 110 27 — 12,0 3 DIN 376 6HX
4159665 GT125010 M20 X 2,5 140 32 — 16,0 3 DIN 376 6HX
• WS32MG TiCN for nickel
and nickel alloys.
rst choice
alternate choice
metric dimensions
Shank Tolerance
D mm tolerance h9
1–3 +0, -0,025
>3–6 +0, -0,030
>6–10 +0, -0,036
>10–18 +0, -0,043
>18–30 +0, -0,052
High-Performance Taps
WID_Master16_Taps_Y030_Y031_Metric_REBRAND.indd 30 10/30/15 3:04 PM
Y31
LViWID M 16 T Y030 Y031 M i REBRANDO b 23 20159 51AM
widia.com
WN35MG
High-Performance Taps
Victory™ Spiral-Flute HSS-E-PM Taps • Blind Holes
Shank Tolerance
D mm tolerance h9
1–3 +0, -0,025
>3–6 +0, -0,030
>6–10 +0, -0,036
>10–18 +0, -0,043
>18–30 +0, -0,052
GT16 • Form C Semi-Bottoming Chamfer • Metric DIN 371 • For Titanium and Titanium Alloys
grade WN35MG
TiN/DLC
order # catalogue # D1 size L L3 L2 D
number
of flutes
dimension
standard
class
of fit
4160437 GT165001 M3 X 0,5 56 6 18 3,5 3 DIN 371 6HX
4160438 GT165002 M4 X 0,7 63 7 21 4,5 3 DIN 371 6HX
4160439 GT165003 M5 X 0,8 70 8 25 6,0 3 DIN 371 6HX
4160440 GT165004 M6 X 1 80 10 30 6,0 3 DIN 371 6HX
4160441 GT165005 M8 X 1,25 90 14 35 8,0 3 DIN 371 6HX
4160442 GT165006 M10 X 1,5 100 16 39 10,0 3 DIN 371 6HX
4160523 GT165007 M12 X 1,75 110 18 44 12,0 3 DIN 371 6HX
High-Performance Taps
• WN35MG TiN/DLC for titanium
and titanium alloys.
rst choice
alternate choice
metric dimensions
WID_Master16_Taps_Y030_Y031_Metric_REBRAND.indd 31 10/30/15 3:04 PM
Y32
LViWID M 16 T Y032 Y033 M i REBRAND O b 23 2015 9 52 AM
widia.com
WN48EG
High-Performance Taps
Victory™ Spiral-Flute HSS-E Taps • Blind Holes
Shank Tolerance
D mm tolerance h9
1–3 +0, -0,025
3,5–6 +0, -0,030
7–10 +0, -0,036
11–18 +0, -0,043
GT80 • Form C Semi-Bottoming Chamfer • Metric DIN 371 and 376 • For Aluminium
grade WN48EG
DLC
order # catalogue # D1 size L L3 L2 D
number
of flutes
dimension
standard
class
of fit
4160054 GT805001 M3 X 0,5 56 6 18 3,5 2 DIN 371 6H
4160055 GT805002 M4 X 0,7 63 7 21 4,5 2 DIN 371 6H
4160056 GT805003 M5 X 0,8 70 8 25 6,0 2 DIN 371 6H
4160057 GT805004 M6 X 1 80 10 30 6,0 2 DIN 371 6H
4160058 GT805005 M8 X 1,25 90 14 35 8,0 2 DIN 371 6H
4160059 GT805006 M10 X 1,5 100 16 39 10,0 2 DIN 371 6H
4160060 GT805007 M12 X 1,75 110 18 — 9,0 3 DIN 376 6H
4160061 GT805008 M16 X 2 110 22 — 12,0 3 DIN 376 6H
4160062 GT805009 M20 X 2,5 140 25 — 16,0 3 DIN 376 6H
High-Performance Taps
• WN48EG DLC for aluminium.
rst choice
alternate choice
metric dimensions
WID_Master16_Taps_Y032_Y033_Metric_REBRAND.indd 32 10/30/15 3:04 PM
Y33
LViWID M 16 T Y032 Y033 M i REBRANDO b 23 20159 52AM
widia.com
WP31MG
High-Performance Taps
Victory™ Spiral-Flute HSS-E-PM Taps • Blind Holes
GT02 • Form C Semi-Bottoming Chamfer • Metric DIN 371, 374, and 376 • For Hard Steel
grade WP31MG
TiN
order # catalogue # D1 size L L3 L2 D
number
of flutes
dimension
standard
class
of fit
4152638 GT025001 M3 X 0,5 56 11 18 3,5 3 DIN 371 6H
4152639 GT025002 M4 X 0,7 63 13 21 4,5 3 DIN 371 6H
4152640 GT025003 M5 X 0,8 70 15 25 6,0 3 DIN 371 6H
4152641 GT025004 M6 X 1 80 17 30 6,0 3 DIN 371 6H
4152709 GT025012 M8 X 1 90 17 — 6,0 3 DIN 374 6H
4152642 GT025005 M8 X 1,25 90 20 35 8,0 3 DIN 371 6H
4152710 GT025013 M10 X 1 90 18 — 7,0 3 DIN 374 6H
4152711 GT025014 M10 X 1,25 100 22 — 7,0 3 DIN 374 6H
4152703 GT025006 M10 X 1,5 100 22 39 10,0 3 DIN 371 6H
4152712 GT025015 M12 X 1,25 100 22 — 9,0 3 DIN 374 6H
4152713 GT025016 M12 X 1,5 100 22 — 9,0 3 DIN 374 6H
4152704 GT025007 M12 X 1,75 110 24 44 12,0 3 DIN 376 6H
4152714 GT025017 M14 X 1,5 100 22 — 11,0 3 DIN 374 6H
4152705 GT025008 M14 X 2 110 26 52 11,0 3 DIN 376 6H
4152715 GT025018 M16 X 1,5 100 22 — 12,0 3 DIN 374 6H
4152706 GT025009 M16 X 2 110 27 — 12,0 3 DIN 376 6H
4152707 GT025010 M18 X 2 125 30 — 14,0 4 DIN 376 6H
4152708 GT025011 M20 X 2,5 140 32 — 16,0 4 DIN 376 6H
• WP31MG TiN
for steel 32–44 HRC.
rst choice
alternate choice
metric dimensions
Shank Tolerance
D mm tolerance h9
1–3 +0, -0,025
>3–6 +0, -0,030
>6–10 +0, -0,036
>10–18 +0, -0,043
>18–30 +0, -0,052
High-Performance Taps
WID_Master16_Taps_Y032_Y033_Metric_REBRAND.indd 33 10/30/15 3:04 PM
Y34
LViWID M 16 T Y034 Y035 M i REBRAND O b 23 2015 9 52 AM
widia.com
WH36MG
High-Performance Taps
Victory™ Spiral-Flute HSS-E-PM Taps • Blind Holes 3 x D
Shank Tolerance
D mm tolerance h9
1–3 +0, -0,025
>3–6 +0, -0,030
>6–10 +0, -0,036
>10–18 +0, -0,043
>18–30 +0, -0,052
GT04 • Form C Semi-Bottoming Chamfer • Metric DIN 371, 374, and 376 • For Hard Steel
grade WH36MG
TiN+MoS2
order # catalogue # D1 size L L3 L2 D
number
of flutes
dimension
standard
class
of fit
4158471 GT045001 M3 X 0,5 56 6 18 3,5 3 DIN 371 6H
4158472 GT045002 M4 X 0,7 63 7 21 4,5 3 DIN 371 6H
4158763 GT045003 M5 X 0,8 70 8 25 6,0 3 DIN 371 6H
4158764 GT045004 M6 X 1 80 10 30 6,0 3 DIN 371 6H
4158772 GT045012 M8 X 1 90 10 — 6,0 3 DIN 374 6H
4158765 GT045005 M8 X 1,25 90 14 35 8,0 3 DIN 371 6H
4158773 GT045013 M10 X 1 90 10 — 7,0 3 DIN 374 6H
4158774 GT045014 M10 X 1,25 100 16 — 7,0 3 DIN 374 6H
4158766 GT045006 M10 X 1,5 100 16 39 10,0 3 DIN 371 6H
4158775 GT045015 M12 X 1,25 100 15 — 9,0 4 DIN 374 6H
4158776 GT045016 M12 X 1,5 100 15 — 9,0 4 DIN 374 6H
4158767 GT045007 M12 X 1,75 110 18 — 9,0 4 DIN 376 6H
4158777 GT045017 M14 X 1,5 100 15 — 11,0 4 DIN 374 6H
4158768 GT045008 M14 X 2 110 20 — 11,0 4 DIN 376 6H
4158778 GT045018 M16 X 1,5 100 15 — 12,0 4 DIN 374 6H
4158769 GT045009 M16 X 2 110 22 — 12,0 4 DIN 376 6H
4158770 GT045010 M18 X 2,5 125 25 — 14,0 4 DIN 376 6H
4158771 GT045011 M20 X 2,5 140 25 — 16,0 4 DIN 376 6H
High-Performance Taps
• WH36MG TiAlN/MoS2 for steel
32–44 HRC (3 x D).
rst choice
alternate choice
metric dimensions
WID_Master16_Taps_Y034_Y035_Metric_REBRAND.indd 34 10/30/15 3:04 PM
Y35
LViWID M 16 T Y034 Y035 M i REBRANDO b 23 20159 52AM
widia.com
WU41EG WP49EG
Multipurpose Taps
VariTap™ Spiral-Flute HSS-E Taps • Blind Holes
VT-SFT • Form C Semi-Bottoming Chamfer • Machine Screw and Fractional • DIN 371 and 376
grade WU41EG
TiN
order # catalogue #
grade WP49EG
Oxide
order # catalogue # D1 size L L3 L2 D
number
of flutes
dimension
standard
class
of fit
5472587 VTSFT6005 5387487 VTSFT6005 4 - 40 56 8 18 3,5 2 DIN 371 2B
5472589 VTSFT6007 5387489 VTSFT6007 5 - 40 56 9 20 4,0 2 DIN 371 2B
5472600 VTSFT6008 5387640 VTSFT6008 6 - 32 56 9 20 4,0 2 DIN 371 2B
5472602 VTSFT6010 5387642 VTSFT6010 6 - 40 56 9 20 4,0 2 DIN 371 2B
5472603 VTSFT6011 5387643 VTSFT6011 8 - 32 63 11 21 4,5 3 DIN 371 2B
5472605 VTSFT6013 5387645 VTSFT6013 10 - 24 70 12 25 6,0 3 DIN 371 2B
5472606 VTSFT6014 5387646 VTSFT6014 10 - 32 70 12 25 6,0 3 DIN 371 2B
5472608 VTSFT6016 5387648 VTSFT6016 1/4 - 20 80 15 30 7,0 3 DIN 371 2B
5472609 VTSFT6017 5387649 VTSFT6017 1/4 - 28 80 15 30 7,0 3 DIN 371 2B
5472611 VTSFT6019 5387651 VTSFT6019 5/16 - 18 90 15 35 8,0 3 DIN 371 2B
5472612 VTSFT6020 5387652 VTSFT6020 5/16 - 24 90 15 35 8,0 3 DIN 371 2B
5472614 VTSFT6022 5387654 VTSFT6022 3/8 - 16 100 19 39 10,0 3 DIN 371 2B
5472615 VTSFT6023 5387655 VTSFT6023 3/8 - 24 100 19 39 10,0 3 DIN 371 2B
5472617 VTSFT6025 5387657 VTSFT6025 7/16 - 14 100 18 41 8,0 3 DIN 376 2B
5472618 VTSFT6026 5387658 VTSFT6026 7/16 - 20 100 18 41 8,0 3 DIN 376 2B
5472620 VTSFT6028 5387670 VTSFT6028 1/2 - 13 110 23 40 9,0 3 DIN 376 2B
5472621 VTSFT6029 5387671 VTSFT6029 1/2 - 20 110 23 40 9,0 3 DIN 376 2B
5472623 VTSFT6031 5387673 VTSFT6031 9/16 - 12 110 25 32 11,0 3 DIN 376 2B
5472624 VTSFT6032 5387674 VTSFT6032 9/16 - 18 110 25 32 11,0 3 DIN 376 2B
5472625 VTSFT6033 5387675 VTSFT6033 5/8 - 11 110 24 35 12,0 3 DIN 376 2B
• WU41EG TiN.
• WP49EG oxide.
rst choice
alternate choice
metric dimensions
Shank Tolerance
D mm tolerance h9
1–3 +0, -0,025
>3–6 +0, -0,030
>6–10 +0, -0,036
>10–18 +0, -0,043
>18–30 +0, -0,052
Multipurpose Taps
(continued)
WID_Master16_Taps_Y034_Y035_Metric_REBRAND.indd 35 10/30/15 3:04 PM
Y36
LViWID M 16 T Y036 Y037 M i REBRAND O b 23 2015 9 52 AM
widia.com
WU41EG WP49EG
Multipurpose Taps
VariTap™ Spiral-Flute HSS-E Taps • Blind Holes
rst choice
alternate choice
metric dimensions
grade WU41EG
TiN
order # catalogue #
grade WP49EG
Oxide
order # catalogue # D1 size L L3 L2 D
number
of flutes
dimension
standard
class
of fit
5472626 VTSFT6034 5387676 VTSFT6034 5/8 - 18 110 24 35 12,0 3 DIN 376 2B
5472627 VTSFT6035 5387677 VTSFT6035 3/4 - 10 140 30 46 16,0 4 DIN 376 2B
5472628 VTSFT6036 5387678 VTSFT6036 3/4 - 16 140 30 46 16,0 4 DIN 376 2B
5472629 VTSFT6037 5387679 VTSFT6037 7/8 - 9 140 34 35 18,0 4 DIN 376 2B
5472630 VTSFT6038 5387700 VTSFT6038 7/8 - 14 140 34 35 18,0 4 DIN 376 2B
5472631 VTSFT6039 5387701 VTSFT6039 1 - 8 160 38 41 18,0 4 DIN 376 2B
5472632 VTSFT6040 5387702 VTSFT6040 1 - 12 160 38 41 18,0 4 DIN 376 2B
Multipurpose Taps
(VT-SFT • Form C Semi-Bottoming Chamfer • Machine Screw and Fractional • DIN 371 and 376 — continued)
WID_Master16_Taps_Y036_Y037_Metric_REBRAND.indd 36 10/30/15 3:04 PM
Y37
LViWID M 16 T Y036 Y037 M i REBRANDO b 23 20159 52AM
widia.com
WP49EG
Multipurpose Taps
VariTap™ Spiral-Flute HSS-E Taps • Blind Holes
VT-SFT • Form C Semi-Bottoming Chamfer • UNJC/UNJF • Inch DIN 371 and 376
grade WP49EG
Oxide
order # catalogue # D1 size L L3 L2 D
number
of flutes
dimension
standard
class
of fit
5387488 VTSFT6006 4 - 40 56 8 18 3,5 2 DIN 371 3B
5387641 VTSFT6009 6 - 32 56 9 20 4,0 2 DIN 371 3B
5387644 VTSFT6012 8 - 32 63 11 21 4,5 3 DIN 371 3B
5387647 VTSFT6015 10 - 32 70 12 25 6,0 3 DIN 371 3B
5387650 VTSFT6018 1/4 - 28 80 15 30 7,0 3 DIN 371 3B
5387653 VTSFT6021 5/16 - 24 90 15 35 8,0 3 DIN 371 3B
5387656 VTSFT6024 3/8 - 24 100 19 39 10,0 3 DIN 371 3B
5387659 VTSFT6027 7/16 - 20 100 18 41 8,0 3 DIN 376 3B
5387672 VTSFT6030 1/2 - 20 110 23 40 9,0 3 DIN 376 3B
• WP49EG oxide
rst choice
alternate choice
metric dimensions
Shank Tolerance
D mm tolerance h9
1–3 +0, -0,025
>3–6 +0, -0,030
>6–10 +0, -0,036
>10–18 +0, -0,043
>18–30 +0, -0,052
Multipurpose Taps
WID_Master16_Taps_Y036_Y037_Metric_REBRAND.indd 37 10/30/15 3:04 PM
Y38
LViWID M 16 T Y038 Y039 M i REBRAND O b 23 2015 9 52 AM
widia.com
WP42EG WU41EG WP49EG WU40EG
Multipurpose Taps
VariTap™ Spiral-Flute HSS-E Taps • Blind Holes
VT-SFT • Form C Semi-Bottoming Chamfer • Metric DIN 371, 374, and 376
grade WP42EG
TiCN
order # catalogue #
grade WU41EG
TiN
order # catalogue #
grade WP49EG
Oxide
order # catalogue #
grade WU40EG
Bright
order # catalogue # D1 size L L3 L2 D
number
of flutes
dimension
standard
class
of fit
5368703 VTSFT6506 5368702 VTSFT6506 5368704 VTSFT6506 5368705 VTSFT6506 M2 X 0,4 45 7 13 2,8 2 DIN 371 6H
– – 5368706 VTSFT6507 – M2 X 0,4 45 7 13 2,8 2 DIN 371 6G
– – 5368707 VTSFT6508 – M2,2 X 0,45 45 7 13 2,8 2 DIN 371 6H
– 5368708 VTSFT6509 5368709 VTSFT6509 5368720 VTSFT6509 M2,5 X 0,45 50 7 15 2,8 2 DIN 371 6H
– – 5368721 VTSFT6510 – M2,5 X 0,45 50 7 15 2,8 2 DIN 371 6G
– – 5402138 VTSFT6545 – M3 X 0,35 56 8 — 2,2 2 DIN 374 6H
– – 5368726 VTSFT6512 – M3 X 0,5 56 8 18 3,5 2 DIN 371 6G
– – 5402227 VTSFT6525 5402228 VTSFT6525 M3 X 0,5 56 8 — 2,2 2 DIN 376 6H
5368723 VTSFT6511 5368722 VTSFT6511 5368724 VTSFT6511 5368725 VTSFT6511 M3 X 0,5 56 8 18 3,5 2 DIN 371 6H
– 5368727 VTSFT6513 5368728 VTSFT6513 5368729 VTSFT6513 M3,5 X 0,6 56 9 20 4,0 2 DIN 371 6H
– – 5402139 VTSFT6546 5402180 VTSFT6546 M4 X 0,5 63 10 21 2,8 3 DIN 374 6H
– – 5368734 VTSFT6515 – M4 X 0,7 63 11 21 4,5 3 DIN 371 6G
– – 5402229 VTSFT6526 5402250 VTSFT6526 M4 X 0,7 63 10 21 2,8 3 DIN 376 6H
5368731 VTSFT6514 5368730 VTSFT6514 5368732 VTSFT6514 5368733 VTSFT6514 M4 X 0,7 63 11 21 4,5 3 DIN 371 6H
– – 5402181 VTSFT6547 5402182 VTSFT6547 M5 X 0,5 70 12 25 3,5 3 DIN 374 6H
– – 5368739 VTSFT6517 – M5 X 0,8 70 12 25 6,0 3 DIN 371 6G
– – 5402251 VTSFT6527 5402252 VTSFT6527 M5 X 0,8 70 12 25 3,5 3 DIN 376 6H
5368736 VTSFT6516 5368735 VTSFT6516 5368737 VTSFT6516 5368738 VTSFT6516 M5 X 0,8 70 12 25 6,0 3 DIN 371 6H
– – 5402183 VTSFT6548 – M6 X 0,5 80 12 30 4,5 3 DIN 374 6H
– – 5402185 VTSFT6549 5402184 VTSFT6549 M6 X 0,75 80 12 30 4,5 3 DIN 374 6H
• WP42EG TiCN
• WU41EG TiN
• WP49EG oxide
• WU40EG bright
rst choice
alternate choice
metric
dimensions
Shank Tolerance
D mm tolerance h9
1–3 +0, -0,025
>3–6 +0, -0,030
>6–10 +0, -0,036
>10–18 +0, -0,043
>18–30 +0, -0,052
Multipurpose Taps
(continued)
WID_Master16_Taps_Y038_Y039_Metric_REBRAND.indd 38 10/30/15 3:04 PM
Y39
LViWID M 16 T Y038 Y039 M i REBRANDO b 23 20159 52AM
widia.com
WP42EG WU41EG WP49EG WU40EG
Multipurpose Taps
VariTap™ Spiral-Flute HSS-E Taps • Blind Holes
grade WP42EG
TiCN
order # catalogue #
grade WU41EG
TiN
order # catalogue #
grade WP49EG
Oxide
order # catalogue #
grade WU40EG
Bright
order # catalogue # D1 size L L3 L2 D
number
of flutes
dimension
standard
class
of fit
5368741 VTSFT6518 5368740 VTSFT6518 5368742 VTSFT6518 5368743 VTSFT6518 M6 X 1 80 12 30 6,0 3 DIN 371 6H
– – 5402253 VTSFT6528 5402254 VTSFT6528 M6 X 1 80 12 30 4,5 3 DIN 376 6H
– – 5368744 VTSFT6519 – M6 X 1 80 12 30 6,0 3 DIN 371 6G
– – 5368745 VTSFT6520 5368746 VTSFT6520 M7 X 1 80 12 30 7,0 3 DIN 371 6H
– – 5402186 VTSFT6550 5402187 VTSFT6550 M8 X 0,75 80 12 30 6,0 3 DIN 374 6H
5402188 VTSFT6551 – 5402189 VTSFT6551 5402190 VTSFT6551 M8 X 1 90 15 35 6,0 3 DIN 374 6H
– – 5368752 VTSFT6522 – M8 X 1,25 90 15 35 8,0 3 DIN 371 6G
– – 5402255 VTSFT6529 5402256 VTSFT6529 M8 X 1,25 90 15 35 6,0 3 DIN 376 6H
5368749 VTSFT6521 5368748 VTSFT6521 5368750 VTSFT6521 5368751 VTSFT6521 M8 X 1,25 90 15 35 8,0 3 DIN 371 6H
– – – 5402191 VTSFT6552 M10 X 0,75 90 15 35 7,0 3 DIN 374 6H
– – 5402192 VTSFT6553 5402193 VTSFT6553 M10 X 1 90 15 35 7,0 3 DIN 374 6H
5402194 VTSFT6554 – 5402195 VTSFT6554 5402196 VTSFT6554 M10 X 1,25 100 18 39 7,0 3 DIN 374 6H
5368754 VTSFT6523 5368753 VTSFT6523 5368755 VTSFT6523 5368756 VTSFT6523 M10 X 1,5 100 18 39 10,0 3 DIN 371 6H
– – 5368757 VTSFT6524 – M10 X 1,5 100 18 39 10,0 3 DIN 371 6G
– – 5402257 VTSFT6530 5402258 VTSFT6530 M10 X 1,5 100 18 39 7,0 3 DIN 376 6H
– – 5402197 VTSFT6555 5402198 VTSFT6555 M12 X 1 100 21 39 9,0 3 DIN 374 6H
– – 5402199 VTSFT6556 5402200 VTSFT6556 M12 X 1,25 100 21 39 9,0 3 DIN 374 6H
5402201 VTSFT6557 – 5402202 VTSFT6557 5402203 VTSFT6557 M12 X 1,5 100 21 39 9,0 3 DIN 374 6H
– – 5402263 VTSFT6532 – M12 X 1,75 110 21 44 9,0 3 DIN 376 6G
5402260 VTSFT6531 5402259 VTSFT6531 5402261 VTSFT6531 5402262 VTSFT6531 M12 X 1,75 110 21 44 9,0 3 DIN 376 6H
– – – 5402204 VTSFT6558 M14 X 1 100 21 47 11,0 3 DIN 374 6H
– – – 5402205 VTSFT6559 M14 X 1,25 100 21 47 11,0 3 DIN 374 6H
5402206 VTSFT6560 – 5402207 VTSFT6560 5402208 VTSFT6560 M14 X 1,5 100 21 47 11,0 3 DIN 374 6H
– – 5402268 VTSFT6534 – M14 X 2 110 24 52 11,0 3 DIN 376 6G
5402265 VTSFT6533 5402264 VTSFT6533 5402266 VTSFT6533 5402267 VTSFT6533 M14 X 2 110 24 52 11,0 3 DIN 376 6H
– – – 5402209 VTSFT6561 M16 X 1 100 21 46 12,0 3 DIN 374 6H
– – 5402210 VTSFT6562 5402211 VTSFT6562 M16 X 1,5 100 21 46 12,0 3 DIN 374 6H
– – 5402272 VTSFT6536 – M16 X 2 110 24 51 12,0 3 DIN 376 6G
– 5402269 VTSFT6535 5402270 VTSFT6535 5402271 VTSFT6535 M16 X 2 110 24 51 12,0 3 DIN 376 6H
– – – 5402212 VTSFT6563 M18 X 1 110 21 50 14,0 4 DIN 374 6H
– – 5402214 VTSFT6564 5402213 VTSFT6564 M18 X 1,5 110 21 50 14,0 4 DIN 374 6H
– – – 5402215 VTSFT6565 M18 X 2 125 30 58 14,0 4 DIN 374 6H
– 5402273 VTSFT6537 5402274 VTSFT6537 5402275 VTSFT6537 M18 X 2,5 125 30 58 14,0 4 DIN 376 6H
– – – 5402216 VTSFT6566 M20 X 1 125 24 56 16,0 4 DIN 374 6H
– – 5402217 VTSFT6567 5402218 VTSFT6567 M20 X 1,5 125 24 56 16,0 4 DIN 374 6H
– – – 5402219 VTSFT6568 M20 X 2 140 30 64 16,0 4 DIN 374 6H
– 5402276 VTSFT6538 5402277 VTSFT6538 5402278 VTSFT6538 M20 X 2,5 140 30 64 16,0 4 DIN 376 6H
– – 5402220 VTSFT6569 5402221 VTSFT6569 M22 X 1,5 125 24 62 18,0 4 DIN 374 6H
– – – 5402222 VTSFT6570 M22 X 2 140 30 70 18,0 4 DIN 374 6H
– 5402279 VTSFT6539 5402280 VTSFT6539 5402281 VTSFT6539 M22 X 2,5 140 30 70 18,0 4 DIN 376 6H
Multipurpose Taps
(continued)
rst choice
alternate choice
metric
dimensions
(VT-SFT • Form C Semi-Bottoming Chamfer • Metric DIN 371, 374, and 376 — continued)
WID_Master16_Taps_Y038_Y039_Metric_REBRAND.indd 39 10/30/15 3:04 PM
Y40
LViWID M 16 T Y040 Y041 M i REBRAND O b 23 2015 9 52 AM
widia.com
WP42EG WU41EG WP49EG WU40EG
Multipurpose Taps
VariTap™ Spiral-Flute HSS-E Taps • Blind Holes
rst choice
alternate choice
metric
dimensions
grade WP42EG
TiCN
order # catalogue #
grade WU41EG
TiN
order # catalogue #
grade WP49EG
Oxide
order # catalogue #
grade WU40EG
Bright
order # catalogue # D1 size L L3 L2 D
number
of flutes
dimension
standard
class
of fit
– – 5402223 VTSFT6571 5402224 VTSFT6571 M24 X 1,5 140 28 67 18,0 4 DIN 374 6H
– – – 5402225 VTSFT6572 M24 X 2 140 28 67 18,0 4 DIN 374 6H
– 5402282 VTSFT6540 5402283 VTSFT6540 5402284 VTSFT6540 M24 X 3 160 36 77 18,0 4 DIN 376 6H
– 5402285 VTSFT6541 5402286 VTSFT6541 5402287 VTSFT6541 M27 X 3 160 36 82 20,0 4 DIN 376 6H
– – – 5402226 VTSFT6573 M30 X 2 150 28 80 22,0 2 DIN 374 6H
– 5402288 VTSFT6542 5402289 VTSFT6542 5402290 VTSFT6542 M30 X 3,5 180 42 91 22,0 4 DIN 376 6H
– – 5402291 VTSFT6543 5402292 VTSFT6543 M33 X 3,5 180 42 100 25,0 4 DIN 376 6H
– – 5402293 VTSFT6544 5402294 VTSFT6544 M36 X 4 200 48 110 28,0 5 DIN 376 6H
Multipurpose Taps
(VT-SFT • Form C Semi-Bottoming Chamfer • Metric DIN 371, 374, and 376 — continued)
WID_Master16_Taps_Y040_Y041_Metric_REBRAND.indd 40 10/30/15 3:04 PM
Y41
LViWID M 16 T Y040 Y041 M i REBRANDO b 23 20159 52AM
widia.com
WP42EG WP49EG
Multipurpose Taps
VariTap™ Spiral-Flute HSS-E Taps • Blind Holes
Shank Tolerance
D mm tolerance h9
1–3 +0, -0,025
>3–6 +0, -0,030
>6–10 +0, -0,036
>10–18 +0, -0,043
>18–30 +0, -0,052
VT-SFT • Form E Bottoming Chamfer • Metric DIN 371, 374, and 376
grade WP42EG
TiCN
order # catalogue #
grade WP49EG
Oxide
order # catalogue # D1 size L L3 L2 D
number
of flutes
dimension
standard
class
of fit
5387434 VTSFT6574 5387435 VTSFT6574 M3 X 0,5 56 8 18 3,5 2 DIN 371 6H
5387436 VTSFT6575 5387437 VTSFT6575 M4 X 0,7 63 11 21 4,5 3 DIN 371 6H
5387438 VTSFT6576 5387439 VTSFT6576 M5 X 0,8 70 12 25 6,0 3 DIN 371 6H
5387460 VTSFT6577 5387461 VTSFT6577 M6 X 1 80 12 30 6,0 3 DIN 371 6H
5387475 VTSFT6585 5387476 VTSFT6585 M8 X 1 90 15 35 6,0 3 DIN 374 6H
5387462 VTSFT6578 5387463 VTSFT6578 M8 X 1,25 90 15 35 8,0 3 DIN 371 6H
5387477 VTSFT6586 5387478 VTSFT6586 M10 X 1,25 100 18 39 7,0 3 DIN 374 6H
5387464 VTSFT6579 5387465 VTSFT6579 M10 X 1,5 100 18 39 10,0 3 DIN 371 6H
5387479 VTSFT6587 5387481 VTSFT6587 M12 X 1,5 100 21 39 9,0 3 DIN 374 6H
5387466 VTSFT6580 5387467 VTSFT6580 M12 X 1,75 110 21 44 9,0 3 DIN 376 6H
5387482 VTSFT6588 5387483 VTSFT6588 M14 X 1,5 100 21 47 11,0 3 DIN 374 6H
5387468 VTSFT6581 5387469 VTSFT6581 M14 X 2 110 24 52 11,0 3 DIN 376 6H
– 5387470 VTSFT6582 M16 X 2 110 24 51 12,0 3 DIN 376 6H
5387471 VTSFT6583 5387472 VTSFT6583 M18 X 2,5 125 30 58 14,0 4 DIN 376 6H
5387473 VTSFT6584 5387474 VTSFT6584 M20 X 2,5 140 30 64 16,0 4 DIN 376 6H
Multipurpose Taps
• WP42EG TiCN
• WP49EG oxide
rst choice
alternate choice
metric dimensions
WID_Master16_Taps_Y040_Y041_Metric_REBRAND.indd 41 10/30/15 3:04 PM
Y42
LViWID M 16 T Y042 Y043 M i REBRAND O b 30 2015 1 02 PM
widia.com
WU41EG WU40EG
3–5
Multipurpose Taps
VariTap™ Spiral-Flute HSS-E Taps • Blind Holes
VT-SFT • Form C Semi-Bottoming Chamfer • Metric • JIS
grade WU41EG
TiN
order # catalogue #
grade WU40EG
Bright
order # catalogue # D1 size L L3 L2 D
number
of flutes
dimension
standard
tap
class
5398709 VTSFT7505 5398708 VTSFT7505 M3 X 0,5 46 11 19 4,0 2 JIS ISO 2
5398791 VTSFT7506 5398790 VTSFT7506 M4 X 0,7 52 13 21 5,0 3 JIS ISO 2
5398793 VTSFT7507 5398792 VTSFT7507 M5 X 0,8 60 16 24 5,5 3 JIS ISO 2
5398795 VTSFT7508 5398794 VTSFT7508 M6 X 1 62 19 29 6,0 3 JIS ISO 2
5398797 VTSFT7509 5398796 VTSFT7509 M8 X 1,25 70 22 37 6,2 3 JIS ISO 2
5398799 VTSFT7510 5398798 VTSFT7510 M10 X 1,5 75 24 41 7,0 3 JIS ISO 2
– 5398800 VTSFT7511 M12 X 1,25 82 29 48 8,5 3 JIS ISO 2
– 5398802 VTSFT7513 M12 X 1,5 82 29 48 8,5 3 JIS ISO 2
– 5398801 VTSFT7512 M12 X 1,75 82 29 48 8,5 3 JIS ISO 2
– 5398804 VTSFT7515 M14 X 1,5 88 30 48 10,5 3 JIS ISO 2
– 5398803 VTSFT7514 M14 X 2 88 30 48 10,5 3 JIS ISO 2
– 5398806 VTSFT7517 M16 X 1,5 95 32 52 12,5 3 JIS ISO 2
– 5398805 VTSFT7516 M16 X 2 95 32 52 12,5 3 JIS ISO 2
– 5398807 VTSFT7518 M18 X 2,5 100 37 55 14,0 4 JIS ISO 2
– 5398808 VTSFT7519 M20 X 2,5 105 37 60 15,0 4 JIS ISO 2
• WU41EG TiN
• WU40EG bright
rst choice
alternate choice
metric dimensions
Multipurpose Taps
Shank Tolerance
D mm tolerance h9
1–3 +0, -0,025
>3–6 +0, -0,030
>6–10 +0, -0,036
>10–18 +0, -0,043
>18–30 +0, -0,052
WID_Master16_Taps_Y042_Y043_Metric_REBRAND.indd 42 10/30/15 3:04 PM
LViWID M 16 T Y042 Y043 M i REBRANDO b 30 20151 02PM
WIDIA™ VariTap™
Tap into the
power of the
original.
A heritage of hard work, innovation, and excellence. That’s what
makes an original.
Built on a 140-year legacy of providing the industry with the highest quality
performance in taps, dies, and gages. Our history propels us to keep delivering
the most advanced solutions.
The WIDIA VariTap is the next application of our commitment to innovation.
• Extensive range of sizes, fi ts, styles, and coatings, equipped with optimised
geometry, offering the largest portfolio solution of multipurpose taps available.
• Capable of working with a wide variety of materials.
• Long and consistent tool life leading to lower inventory costs.
• Unique spiral-point geometry provides low tapping torque, while pushing chips
ahead of the tap in through holes.
• Superior thread fi nish.
To learn more about the unmatched benefi ts of WIDIA VariTap, call 800.979.4342,
contact your local Authorised Distributor, or visit widia.com/varitap.
WID_Master16_Taps_Y042_Y043_Metric_REBRAND.indd 43 10/30/15 3:04 PM
Y44
LViWID M 16 T Y044 Y045 M i REBRAND N b 13 2015 9 05 AM
widia.com
Straight Flute
WIDIA-GTD™ offers a wide range of straight-fl ute options for tapping through and blind holes in:
• Cast iron.
• Aluminium.
Solutions for Through and Blind Hole Applications •
WIDIA-GTD™
WID_Master16_Taps_Y044_Y045_Metric_REBRAND.indd 44 11/13/15 9:40 AM
Y45
LViWID M 16 T Y044 Y045 M i REBRANDN b 13 20159 05AM
widia.com
High-Performance Victory™ Solid Carbide Taps
• Straight flute designed for outstanding tool life in cast iron, aluminium,
and hardened materials.
• Manufactured with fine-grain micrograin carbide for exceptional wear life.
• Ideal for long production runs where fewer tool changes mean greater
productivity.
• Runs up to 4x faster and lasts up to 4x longer than conventional high-speed
steel taps.
• Excellent thread quality and tap performance.
High-Performance Victory™ HSS-E-PM Taps
• Straight-flute taps store chips in hole or are flushed out with internal coolant.
• Manufactured from powdered metal high-speed steel coated for thread
cutting in cast iron and aluminium.
• Offer performance advantages over conventional high-speed steel taps.
• Long tap life at up to 50% higher tapping speed than HSS taps.
WID_Master16_Taps_Y044_Y045_Metric_REBRAND.indd 45 11/13/15 9:40 AM
Y46
LViWID M 16 T Y046 Y047 M i REBRAND O b 23 2015 9 53 AM
widia.com
WH16PG
High-Performance Taps
Victory™ Straight-Flute Carbide Taps • Blind and Through Holes
Shank Tolerance
D mm tolerance h6
1–3 +0, -0,025
3,5–6 +0, -0,030
7–10 +0, -0,036
11–18 +0, -0,043
GX10 • Form C Semi-Bottoming Chamfer • Metric DIN 371, 374, and 376 • For Hard Steel
grade WH16PG
TiAlN+MoS2
order # catalogue # D1 size L L3 L2 D
number
of flutes
dimension
standard
class
of fit
4158323 GX105001 M3 X 0,5 63 6 18 4,5 4 DIN 371 6HX
4158324 GX105002 M4 X 0,7 63 8 20 4,5 4 DIN 371 6HX
4158325 GX105003 M5 X 0,8 70 10 26 6,0 4 DIN 371 6HX
4158326 GX105004 M6 X 1 80 12 28 6,0 4 DIN 371 6HX
4158331 GX105009 M8 X 1 90 15 35 8,0 5 DIN 374 6HX
4158327 GX105005 M8 X 1,25 90 15 35 8,0 5 DIN 371 6HX
4158332 GX105010 M10 X 1 100 18 38 10,0 5 DIN 374 6HX
4158328 GX105006 M10 X 1,5 100 18 38 10,0 5 DIN 371 6HX
4158333 GX105011 M12 X 1,5 110 21 41 12,0 5 DIN 374 6HX
4158329 GX105007 M12 X 1,75 110 21 41 12,0 5 DIN 376 6HX
4158334 GX105012 M14 X 1,5 110 24 44 14,0 5 DIN 374 6HX
4158330 GX105008 M14 X 2 110 24 44 14,0 6 DIN 376 6HX
4158335 GX105013 M16 X 1,5 110 24 44 16,0 5 DIN 374 6HX
High-Performance Taps
• WH16PG TiAlN/MoS2
for steel 55–63 HRC.
rst choice
alternate choice
metric dimensions
WID_Master16_Taps_Y046_Y047_Metric_REBRAND.indd 46 10/30/15 3:04 PM
Y47
LViWID M 16 T Y046 Y047 M i REBRANDO b 23 20159 53AM
widia.com
WK12PG
High-Performance Taps
Victory™ Solid Carbide Straight-Flute Taps • Blind Holes
GX35 • Form E Bottoming Chamfer • Through Coolant M6 and Larger • Metric • For Cast Iron
grade WK12PG
TiCN
order # catalogue # D1 size L L3 L2 LS D
number
of flutes
class
of fit
5551152 GX352733 M6 X 1 70 12 24 42 6,0 4 6HX
5551153 GX352734 M8 X 1,25 80 15 32 43 8,0 4 6HX
5551154 GX352735 M10 X 1,5 90 18 40 44 10,0 4 6HX
5551156 GX352738 M12 X 1,5 100 21 48 46 12,0 4 6HX
5551155 GX352737 M12 X 1,75 100 21 48 46 12,0 4 6HX
5551159 GX352740 M14 X 1,5 110 24 56 52 12,0 4 6HX
5551157 GX352739 M14 X 2 110 24 56 52 12,0 4 6HX
5551160 GX352741 M16 X 2 110 24 64 44 14,0 4 6HX
• WK12PG TiCN for cast iron.
rst choice
alternate choice
metric dimensions
Shank Tolerance
D tolerance h6
6 +0, -0,008
8–10 +0, -0,009
12–16 +0, -0,011
High-Performance Taps
WID_Master16_Taps_Y046_Y047_Metric_REBRAND.indd 47 10/30/15 3:04 PM
Y48
LViWID M 16 T Y048 Y049 M i REBRAND O b 23 2015 9 53 AM
widia.com
WK12PG
High-Performance Taps
Victory™ Solid Carbide Straight-Flute Taps • Blind Holes
Shank Tolerance
D mm tolerance h6
6 +0, -0,008
8–10 +0, -0,009
12–16 +0, -0,011
GX35 • Form E Bottoming Chamfer • Through Coolant • Metric • For Cast Iron
grade WK12PG
TiCN
order # catalogue # D1 size L L3 L2 D
number
of flutes
class
of fit
5520825 GX355006 M6 X 1 80 10 30 6,0 4 6HX
5520826 GX355007 M7 X 1 80 10 30 7,0 4 6HX
5520827 GX355008 M8 X 1,25 90 13 35 8,0 4 6HX
5520828 GX355009 M9 X 1,25 90 13 35 9,0 4 6HX
5520830 GX355101 M10 X 1 90 10 35 7,0 4 6HX
5520831 GX355102 M10 X 1,25 100 15 39 7,0 4 6HX
5520829 GX355010 M10 X 1,5 100 15 39 10,0 4 6HX
5520834 GX355121 M12 X 1,25 100 15 39 9,0 4 6HX
5520835 GX355122 M12 X 1,50 100 15 39 9,0 4 6HX
5520833 GX355012 M12 X 1,75 110 18 44 9,0 4 6HX
5520837 GX355141 M14 X 1,25 100 15 47 11,0 4 6HX
5520838 GX355142 M14 X 1,5 100 15 47 11,0 4 6HX
5520836 GX355014 M14 X 2 110 20 52 11,0 4 6HX
High-Performance Taps
rst choice
alternate choice
• WK12PG TiCN for cast iron.
metric dimensions
WID_Master16_Taps_Y048_Y049_Metric_REBRAND.indd 48 10/30/15 3:04 PM
Y49
LViWID M 16 T Y048 Y049 M i REBRANDO b 23 20159 53AM
widia.com
WN14PG
High-Performance Taps
Victory™ Solid Carbide Straight-Flute Taps • Blind Holes
GX47 • Form E Bottoming Chamfer • Through Coolant • Metric • For Aluminium
grade WN14PG
TiN+CrC/C
order # catalogue # D1 size L L3 L2 D
number
of flutes
class
of fit
5520839 GX475006 M6 X 1 80 10 30 6,0 3 6HX
5520840 GX475008 M8 X 1,25 90 10 35 8,0 3 6HX
5520841 GX475010 M10 X 1,5 100 15 39 10,0 3 6HX
• WN14PG TiN + CrC/C
for aluminium.
rst choice
alternate choice
High-Performance Taps
Shank Tolerance
D tolerance h6
6 +0, -0,008
8–10 +0, -0,009
12–16 +0, -0,011
metric dimensions
WID_Master16_Taps_Y048_Y049_Metric_REBRAND.indd 49 10/30/15 3:04 PM
Y50
LViWID M 16 T Y050 Y051 M i REBRAND O b 23 2015 9 53 AM
widia.com
WN14PG
High-Performance Taps
Victory™ Solid Carbide Straight-Flute Taps • Blind Holes
Shank Tolerance
D mm tolerance h6
6 +0, -0,008
8–10 +0, -0,009
12–16 +0, -0,011
GX47 • Form E Bottoming Chamfer • Through Coolant • Metric • For Aluminium
grade WN14PG
TiN+CrC/C
order # catalogue # D1 size L L3 L2 LS D
number
of flutes
class
of fit
5551161 GX472866 M6 X 1 70 12 24 42 6,0 3 6HX
5551162 GX472867 M8 X 1,25 80 15 32 43 8,0 3 6HX
5551163 GX472868 M10 X 1,5 90 18 40 44 10,0 3 6HX
5551164 GX472872 M12 X 1,5 100 21 48 46 12,0 3 6HX
5551165 GX472870 M12 X 1,75 100 21 48 46 12,0 3 6HX
5551166 GX472874 M14 X 1,5 110 24 56 52 12,0 4 6HX
5551167 GX472873 M14 X 2 110 24 56 52 12,0 4 6HX
5551168 GX472875 M16 X 2 110 24 64 44 14,0 4 6HX
High-Performance Taps
• WN14PG TiN + CrC/C
for aluminium.
rst choice
alternate choice
metric dimensions
WID_Master16_Taps_Y050_Y051_Metric_REBRAND.indd 50 10/30/15 3:05 PM
Y51
LViWID M 16 T Y050 Y051 M i REBRANDO b 23 20159 53AM
widia.com
WK12PG
High-Performance Taps
Victory™ Solid Carbide Straight-Flute Taps • Blind Holes
GX50 • Form C Semi-Bottoming Chamfer • Through Coolant M6 and Larger • Metric • For Cast Iron
grade WK12PG
TiCN
order # catalogue # D1 size L L3 L2 D
number
of flutes
class
of fit
5520817 GX505004 M4 X 0,7 63 10 21 4,5 3 6HX
5520818 GX505005 M5 X 0,8 70 10 25 6,0 3 6HX
5520819 GX505006 M6 X 1 80 10 30 6,0 4 6HX
5520820 GX505008 M8 X 1,25 90 13 35 8,0 4 6HX
5520822 GX505010 M10 X 1,5 100 15 39 10,0 4 6HX
5520823 GX505012 M12 X 1,75 110 18 44 9,0 4 6HX
5520824 GX505014 M14 X 2 110 20 52 11,0 4 6HX
• WK12PG TiCN for
cast iron.
rst choice
alternate choice
High-Performance Taps
Shank Tolerance
D mm tolerance h6
6 +0, -0,008
8–10 +0, -0,009
12–16 +0, -0,011
metric dimensions
WID_Master16_Taps_Y050_Y051_Metric_REBRAND.indd 51 10/30/15 3:05 PM
Y52
LViWID M 16 T Y052 Y053 M i REBRAND O b 23 2015 9 53 AM
widia.com
GP6520
High-Performance Taps
Victory™ Straight-Flute HSS-E-PM Taps • Through and Blind Holes
GT40 • Form C Semi-Bottoming Chamfer • Metric DIN 371, 374, and 376 • For Cast Iron
and Cast Aluminium
grade GP6520
TiCN
order # catalogue # D1 size L L3 L2 D
number
of flutes
dimension
standard
class
of fit
4033699 GT405001 M4 X 0,7 63 10 21 4,5 3 DIN 371 6HX
4033700 GT405002 M5 X 0,8 70 10 25 6,0 3 DIN 371 6HX
4033701 GT405003 M6 X 1 80 10 30 6,0 4 DIN 371 6HX
4033702 GT405004 M8 X 1,25 90 13 35 8,0 4 DIN 371 6HX
4033753 GT405005 M10 X 1,5 100 15 39 10,0 4 DIN 371 6HX
5408066 GT405057 M12 X 1,5 100 15 39 9,0 4 DIN 374 6HX
4033754 GT405006 M12 X 1,75 110 18 44 9,0 4 DIN 376 6HX
5408067 GT405058 M14 X 1,5 100 15 47 11,0 4 DIN 374 6HX
4033755 GT405007 M14 X 2 110 20 52 11,0 4 DIN 376 6HX
5408068 GT405059 M16 X 1,5 100 15 46 12,0 4 DIN 374 6HX
4033756 GT405008 M16 X 2 110 20 51 12,0 4 DIN 376 6HX
4033757 GT405009 M18 X 2,5 125 25 58 14,0 4 DIN 376 6HX
4033758 GT405010 M20 X 2,5 140 25 64 16,0 4 DIN 376 6HX
4033759 GT405011 M22 X 2,5 140 25 70 18,0 4 DIN 376 6HX
• GP6520 TiCN for cast iron
and cast aluminium.
rst choice
alternate choice
metric dimensions
Shank Tolerance
D mm tolerance h6
>3–6 +0, -0,008
>6–10 +0, -0,009
>10–18 +0, -0,011
>18–30 +0, -0,013
>30–50 +0, -0,016
High-Performance Taps
WID_Master16_Taps_Y052_Y053_Metric_REBRAND.indd 52 10/30/15 3:05 PM
Y53
LViWID M 16 T Y052 Y053 M i REBRANDO b 23 20159 53AM
widia.com
GP6520
High-Performance Taps
Victory™ Straight-Flute HSS-E-PM Taps • Through and Blind Holes
GT41 • Form C Semi-Bottoming Chamfer • Through Coolant • Metric DIN 371, 374, and 376 • For Cast Iron
and Cast Aluminium
grade GP6520
TiCN
order # catalogue # D1 size L L3 L2 D
number
of flutes
dimension
standard
class
of fit
4033659 GT415001 M4 X 0,7 63 10 21 4,5 3 DIN 371 6HX
4033660 GT415002 M5 X 0,8 70 10 25 6,0 3 DIN 371 6HX
4033661 GT415003 M6 X 1 80 10 30 6,0 4 DIN 371 6HX
4033662 GT415004 M8 X 1,25 90 13 35 8,0 4 DIN 371 6HX
4033813 GT415005 M10 X 1,5 100 15 39 10,0 4 DIN 371 6HX
5408069 GT415021 M12 X 1,5 100 15 39 9,0 4 DIN 374 6HX
4033814 GT415006 M12 X 1,75 110 18 44 9,0 4 DIN 376 6HX
5408400 GT415022 M14 X 1,5 100 15 47 11,0 4 DIN 374 6HX
4033815 GT415007 M14 X 2 110 20 52 11,0 4 DIN 376 6HX
5408401 GT415023 M16 X 1,5 100 15 46 12,0 4 DIN 374 6HX
4033816 GT415008 M16 X 2 110 20 51 12,0 4 DIN 376 6HX
4033817 GT415009 M18 X 2,5 125 25 58 14,0 4 DIN 376 6HX
4033818 GT415010 M20 X 2,5 140 25 64 16,0 4 DIN 376 6HX
• GP6520 TiCN for cast iron
and cast aluminium.
rst choice
alternate choice
metric dimensions
Shank Tolerance
D mm tolerance h6
>3–6 +0, -0,008
>6–10 +0, -0,009
>10–18 +0, -0,011
>18–30 +0, -0,013
>30–50 +0, -0,016
High-Performance Taps
WID_Master16_Taps_Y052_Y053_Metric_REBRAND.indd 53 10/30/15 3:05 PM
Y54
LViWID M 16 T Y054 Y055 M i REBRAND O b 23 2015 9 53 AM
widia.com
GP6520
High-Performance Taps
Victory™ Straight-Flute HSS-E-PM Taps • Threading Close to the Bottom in Blind Holes
Shank Tolerance
D mm tolerance h6
>3–6 +0, -0,008
>6–10 +0, -0,009
>10–18 +0, -0,011
>18–30 +0, -0,013
>30–50 +0, -0,016
GT42 • Form E Bottoming Chamfer • Metric DIN 371, 374, and 376 • For Cast Iron and Cast Aluminium
grade GP6520
TiCN
order # catalogue # D1 size L L3 L2 D
number
of flutes
dimension
standard
class
of fit
4154274 GT425001 M5 X 0,8 70 10 25 6,0 3 DIN 371 6HX
4154275 GT425002 M6 X 1 80 10 30 6,0 4 DIN 371 6HX
4154276 GT425003 M8 X 1,25 90 13 35 8,0 4 DIN 371 6HX
4154277 GT425004 M10 X 1,5 100 15 39 10,0 4 DIN 371 6HX
4154280 GT425007 M12 X 1,5 100 15 39 9,0 4 DIN 374 6HX
4154278 GT425005 M12 X 1,75 110 18 44 9,0 4 DIN 376 6HX
4154281 GT425008 M14 X 1,5 100 15 47 11,0 4 DIN 374 6HX
4154279 GT425006 M14 X 2 110 20 52 11,0 4 DIN 376 6HX
4154282 GT425009 M16 X 1,5 100 15 46 12,0 4 DIN 374 6HX
5408402 GT425010 M16 X 2 110 20 51 12,0 4 DIN 376 6HX
5408403 GT425011 M18 X 2,5 125 25 58 14,0 4 DIN 376 6HX
5408404 GT425012 M20 X 2,5 140 25 64 16,0 4 DIN 376 6HX
High-Performance Taps
• GP6520 TiCN for cast iron
and cast aluminium.
rst choice
alternate choice
metric dimensions
WID_Master16_Taps_Y054_Y055_Metric_REBRAND.indd 54 10/30/15 3:05 PM
Y55
LViWID M 16 T Y054 Y055 M i REBRANDO b 23 20159 53AM
widia.com
GP6520
High-Performance Taps
Victory™ Straight-Flute HSS-E-PM Taps • Threading Close to the Bottom in Blind Holes
GT43 • Form E Bottoming Chamfer • Through Coolant • Metric DIN 371, 374, and 376 • For Cast Iron
and Cast Aluminium
grade GP6520
TiCN
order # catalogue # D1 size L L3 L2 D
number
of flutes
dimension
standard
class
of fit
4154283 GT435001 M5 X 0,8 70 10 25 6,0 3 DIN 371 6HX
4154284 GT435002 M6 X 1 80 10 30 6,0 4 DIN 371 6HX
4154285 GT435003 M8 X 1,25 90 13 35 8,0 4 DIN 371 6HX
4154286 GT435004 M10 X 1,5 100 15 39 10,0 4 DIN 371 6HX
4154289 GT435007 M12 X 1,5 100 15 39 9,0 4 DIN 374 6HX
4154287 GT435005 M12 X 1,75 110 18 44 9,0 4 DIN 376 6HX
4154290 GT435008 M14 X 1,5 100 15 47 11,0 4 DIN 374 6HX
4154288 GT435006 M14 X 2 110 20 52 11,0 4 DIN 376 6HX
4154291 GT435009 M16 X 1,5 100 15 46 12,0 4 DIN 374 6HX
5408405 GT435010 M16 X 2 110 20 51 12,0 4 DIN 376 6HX
5408406 GT435011 M18 X 2,5 125 25 58 14,0 4 DIN 376 6HX
5408407 GT435012 M20 X 2,5 140 25 64 16,0 4 DIN 376 6HX
• GP6520 TiCN for cast iron
and cast aluminium.
rst choice
alternate choice
metric dimensions
High-Performance Taps
Shank Tolerance
D mm tolerance h6
>3–6 +0, -0,008
>6–10 +0, -0,009
>10–18 +0, -0,011
>18–30 +0, -0,013
>30–50 +0, -0,016
WID_Master16_Taps_Y054_Y055_Metric_REBRAND.indd 55 10/30/15 3:05 PM
Y56
LViWID M 16 T Y056 Y057 M i REBRAND N b 10 2015 2 04 PM
widia.com
WS32MG
High-Performance Taps
Victory™ Straight-Flute HSS-E-PM Taps • Blind and Through Holes
Shank Tolerance
D mm tolerance h9
1–3 +0, -0,025
>3–6 +0, -0,030
>6–10 +0, -0,036
>10–18 +0, -0,043
>18–30 +0, -0,052
GT06 • Form C Semi-Bottoming Chamfer • Metric DIN 371, 374, and 376 • For Hard Steel
grade WS32MG
TiCN
order # catalogue # D1 size L L3 L2 D
number
of flutes
dimension
standard
class
of fit
4159915 GT065003 M6 X 1 80 10 30 6,0 4 DIN 371 6HX
4159918 GT065006 M8 X 1 90 10 35 8,0 5 DIN 374 6HX
4159913 GT065001 M8 X 1,25 90 14 35 8,0 5 DIN 371 6HX
4159919 GT065007 M10 X 1 90 10 35 10,0 5 DIN 374 6HX
4159914 GT065002 M10 X 1,5 100 16 39 10,0 5 DIN 371 6HX
4159920 GT065008 M12 X 1,5 100 15 — 9,0 5 DIN 374 6HX
4159916 GT065004 M12 X 1,75 110 18 — 9,0 5 DIN 376 6HX
4159921 GT065009 M14 X 1,5 100 15 — 11,0 6 DIN 374 6HX
4159922 GT065010 M16 X 1,5 100 15 — 12,0 6 DIN 374 6HX
4159917 GT065005 M16 X 2 110 22 — 12,0 6 DIN 376 6HX
High-Performance Taps
• WS32MG TiCN for
steel 44–55 HRC.
rst choice
alternate choice
metric dimensions
WID_Master16_Taps_Y056_Y057_Metric_REBRAND.indd 56 11/10/15 2:22 PM
Being as productive and profi table as possible is your fundamental goal. With the addition of NOVO™ to your team,
your goal can be achieved. NOVO possesses powerful digital tools that link together process planning, inventory
availability and purchase, cost-per-part management, and productivity improvements.
NOVO can ensure you have the right tools on your machines, in the right sequence. Resulting in fl awless execution
that accelerates every job, and maximises every shift. widia.com/novo
NOVO KNOWS ART TO PART TO PROFIT
01
WID_Master16_Taps_Y056_Y057_Metric_REBRAND.indd 57 11/10/15 2:22 PM
Y58
LViWID M 16 T Y058 Y059 M i REBRAND N b 13 2015 9 08 AM
widia.com
WIDIA-GTD™ offers a wide range of forming tap options for
tapping through and blind holes in:
• Steel and steel alloys.
• Stainless steel.
• Aluminium.
Forming Taps
Solutions for Forming Threads in Through and Blind Hole Applications •
WIDIA-GTD™
WID_Master16_Taps_Y058_Y059_Metric_REBRAND.indd 58 11/13/15 9:40 AM
Y59
LViWID M 16 T Y058 Y059 M i REBRANDN b 13 20159 08AM
widia.com
High-Performance Victory™ Solid Carbide Taps
• Advanced forming geometries designed for superior tap performance
in aluminium.
• Manufactured with fine-grain micrograin carbide for exceptional wear life.
• Ideal for long production runs where fewer tool changes mean greater
productivity.
• Runs up to 4x faster and lasts up to 4x longer than conventional
high-speed steel taps.
• Excellent thread quality and tap performance.
High-Performance Victory™ HSS-E-PM Taps
• Manufactured from powdered metal high-speed steel coated for thread
forming in steel, stainless steel, and aluminium.
• High hardness provides superior wear resistance.
• Offer performance advantages over conventional high-speed steel taps.
• Long tap life at up to 50% higher tapping speed than HSS taps.
WID_Master16_Taps_Y058_Y059_Metric_REBRAND.indd 59 11/13/15 9:40 AM
Y60
LViWID M 16 T Y060 Y061 M i REBRAND O b 23 2015 9 54 AM
widia.com
WN14PG
High-Performance Taps
Victory™ Solid Carbide Forming Taps • Blind Holes
Shank Tolerance
D mm tolerance h6
6 +0, -0,008
8–10 +0, -0,009
12–16 +0, -0,011
GX49 • Form E Bottoming Entry Taper • Through Coolant • Metric • For Aluminium
grade WN14PG
TiN+CrC/C
order # catalogue # D1 size L L3 L2 D
number of
lube grooves
class
of fit
5520842 GX495006 M6 X 1 80 10 30 6,0 2 6HX
5520843 GX495008 M8 X 1,25 90 13 35 8,0 2 6HX
5520844 GX495010 M10 X 1,5 100 15 39 10,0 3 6HX
High-Performance Taps
rst choice
alternate choice
• WN14PG TiN + CrC/C
for aluminium.
metric dimensions
WID_Master16_Taps_Y060_Y061_Metric_REBRAND.indd 60 10/30/15 3:05 PM
Y61
LViWID M 16 T Y060 Y061 M i REBRANDO b 23 20159 54AM
widia.com
WN14PG
High-Performance Taps
Victory™ Solid Carbide Forming Taps • Blind Holes
GX49 • Form E Bottoming Entry Taper • Through Coolant • Metric • For Aluminium
grade WN14PG
TiN+CrC/C
order # catalogue # D1 size L L3 L2 LS D
number of
lube grooves
class
of fit
5551169 GX492908 M6 X 1 70 8 24 42 6,0 2 6HX
5551170 GX492909 M8 X 1,25 80 10 32 43 8,0 2 6HX
5551171 GX492911 M10 X 1,5 90 12 40 44 10,0 3 6HX
5551173 GX492915 M12 X 1,5 100 14 48 46 12,0 3 6HX
5551172 GX492914 M12 X 1,75 100 14 48 46 12,0 3 6HX
• WN14PG TiN + CrC/C
for aluminium.
rst choice
alternate choice
metric dimensions
Shank Tolerance
D tolerance h6
6 +0, -0,008
8–10 +0, -0,009
12–16 +0, -0,011
High-Performance Taps
WID_Master16_Taps_Y060_Y061_Metric_REBRAND.indd 61 10/30/15 3:05 PM
Y62
LViWID M 16 T Y062 Y063 M i REBRAND O b 23 2015 9 54 AM
widia.com
WP31MG WN38MG
High-Performance Taps
Victory™ Forming Taps HSS-E-PM • Blind and Through Holes
Shank Tolerance
D mm tolerance h9
1–3 +0, -0,025
>3–6 +0, -0,030
>6–10 +0, -0,036
>10–18 +0, -0,043
>18–30 +0, -0,052
GT22 • Form C Semi-Bottoming Entry Taper • Metric DIN 2174 • For Steel and Aluminium
grade WP31MG
TiN
order # catalogue #
grade WN38MG
DLC
order # catalogue # D1 size L L3 L2 D
dimension
standard
class
of fit
4158495 GT225016 4154671 GT225001 M3 X 0,5 56 6 18 3,5 DIN 2174 6HX
4158496 GT225017 4154672 GT225002 M4 X 0,7 63 7 21 4,5 DIN 2174 6HX
4158497 GT225018 4154673 GT225003 M5 X 0,8 70 8 25 6,0 DIN 2174 6HX
4158498 GT225019 4154674 GT225004 M6 X 1 80 10 30 6,0 DIN 2174 6HX
4158513 GT225024 4154679 GT225009 M8 X 1 90 10 35 8,0 DIN 2174 6HX
4158499 GT225020 4154675 GT225005 M8 X 1,25 90 14 35 8,0 DIN 2174 6HX
4158514 GT225025 4154680 GT225010 M10 X 1 90 10 35 10,0 DIN 2174 6HX
4158515 GT225026 4154681 GT225011 M10 X 1,25 100 16 39 10,0 DIN 2174 6HX
4158500 GT225021 4154676 GT225006 M10 X 1,5 100 16 39 10,0 DIN 2174 6HX
4158516 GT225027 4154682 GT225012 M12 X 1,25 100 15 — 9,0 DIN 2174 6HX
4158517 GT225028 4154683 GT225013 M12 X 1,5 100 15 — 9,0 DIN 2174 6HX
4158501 GT225022 4154677 GT225007 M12 X 1,75 110 18 — 9,0 DIN 2174 6HX
4158518 GT225029 4154684 GT225014 M14 X 1,5 100 15 — 11,0 DIN 2174 6HX
4158519 GT225030 4154685 GT225015 M16 X 1,5 100 15 — 12,0 DIN 2174 6HX
4158502 GT225023 4154678 GT225008 M16 X 2 110 22 — 12,0 DIN 2174 6HX
High-Performance Taps
• WP31MG TiN for steel.
• WN38MG DLC for aluminium.
rst choice
alternate choice
metric dimensions
WID_Master16_Taps_Y062_Y063_Metric_REBRAND.indd 62 10/30/15 3:05 PM
Y63
LViWID M 16 T Y062 Y063 M i REBRANDO b 23 20159 54AM
widia.com
WP31MG WN38MG
High-Performance Taps
Victory™ Forming Taps HSS-E-PM • Blind and Through Holes
GT23 • Form C Semi-Bottoming Entry Taper • Through Coolant • Metric DIN 2174 • For Steel
and Aluminium
grade WP31MG
TiN
order # catalogue #
grade WN38MG
DLC
order # catalogue # D1 size L L3 L2 D
dimension
standard
class
of fit
4159965 GT235012 4159522 GT235001 M5 X 0,8 70 8 25 6,0 DIN 2174 6HX
4159966 GT235013 4159644 GT235002 M6 X 1 80 10 30 6,0 DIN 2174 6HX
4159971 GT235018 4159649 GT235007 M8 X 1 90 10 35 8,0 DIN 2174 6HX
4159967 GT235014 4159645 GT235003 M8 X 1,25 90 14 35 8,0 DIN 2174 6HX
4159972 GT235019 4159650 GT235008 M10 X 1 90 10 35 10,0 DIN 2174 6HX
4159968 GT235015 4159646 GT235004 M10 X 1,5 100 16 39 10,0 DIN 2174 6HX
4159993 GT235020 4159651 GT235009 M12 X 1,5 100 15 — 9,0 DIN 2174 6HX
4159969 GT235016 4159647 GT235005 M12 X 1,75 110 18 — 9,0 DIN 2174 6HX
4159994 GT235021 4159652 GT235010 M14 X 1,5 100 15 — 11,0 DIN 2174 6HX
4159995 GT235022 4159653 GT235011 M16 X 1,5 100 15 — 12,0 DIN 2174 6HX
4159970 GT235017 4159648 GT235006 M16 X 2 110 22 — 12,0 DIN 2174 6HX
• WP31MG TiN for steel.
• WN38MG DLC for aluminium.
rst choice
alternate choice
metric dimensions
Shank Tolerance
D mm tolerance h9
1–3 +0, -0,025
>3–6 +0, -0,030
>6–10 +0, -0,036
>10–18 +0, -0,043
>18–30 +0, -0,052
High-Performance Taps
WID_Master16_Taps_Y062_Y063_Metric_REBRAND.indd 63 10/30/15 3:05 PM
Y64 widia.com
Optimised fl ute design
Better chip evacuation.
Carbide substrate
Higher heat resistance,
higher speed.
Cylindrical h6 shank
Low runout, higher
quality threads.
Various multilayer coatings
Extremely high wear resistance,
longer tool life.
Our solid thread mills are designed to be the
highest quality thread milling solution.
• Cut up to 63 HRC.
• Improved overall thread quality.
Thread Mills
Thread Mills •
WIDIA-GTD™
WID_Master16_Taps_Y064_Y065_Metric_REBRAND.indd 64 11/11/15 8:59 AM
Y65
widia.com
Unmatched Capabilities
• Capable of easily cutting most difficult materials.
• Carbide grades make threading easier and reduce machining times.
• High-quality internal and external threading on 3-axis CNC machines.
• Thread mills make interrupted cuts and short chips.
• Design offers a range of benefits to improve overall thread quality.
• Short, easily evacuated chips generate less heat and friction, so there
is a lower risk of damage to threading.
Choose WIDIA-GTD™ Thread Mills
• Greater versatility than competitive products.
• Optimum surface quality for an excellent end product.
• Designed to eliminate chipping issues.
• No need to reverse the spindle.
• Fewer machining problems means more production safety.
WID_Master16_Taps_Y064_Y065_Metric_REBRAND.indd 65 11/11/15 8:59 AM
Y66
LViWID M 16 T Y066 Y067 M i REBRAND O b 23 2015 9 54 AM
widia.com
size range
(inch and metric)
GTM Series Solid Thread Milling • Metric
series
size
min–max hole operation coolant grade shank
GTM11 M3–M20 WU13PV 6535 HA
GTM21 M5–M16 WU12PV 6535 HA
GTM31 M4–M16 WU12PV 6535 HA
GTM41 M6–M24 WU16PV 6535 HA
GTM41LH M6–M12 WU16PV 6535 HA
Good
Better
Best
Victory™ GTM Series HP Solid Carbide Thread Mills • Metric
High-Performance Thread Mills
Selection Guide • Solid Carbide Thread Mills
size range
(inch and metric)
GTM Series Solid Thread Milling • Inch
series
size
min–max hole operation coolant grade shank
GTM21 #10–5/8" WU12PV 6535 HA
GTM31 1/4–5/8" WU12PV 6535 HA
GTM41 1/4–3/4" WU16PV 6535 HA
Good
Better
Best
Victory GTM Series HP Solid Carbide Thread Mills • Inch
High-Performance Thread Mills
WID_Master16_Taps_Y066_Y067_Metric_REBRAND.indd 66 10/30/15 3:05 PM
Y67
LViWID M 16 T Y066 Y067 M i REBRANDO b 23 20159 54AM
widia.com
Y70 Y77
Y72 Y77
Y74 Y78
Y69 Y77
Y71 Y77
Y73 Y77
Y75 Y78
Y76 Y78
PMKN S H
page(s)
recommended
cutting
parameters
1, 2, 3,
4, 6, 7
5, 9,
10, 11 12, 13.1 13.2 14.1, 14.2,
14.3, 14.4
15, 16,
17, 18, 19 20 21 22, 23,
24, 25
26, 27,
28 31, 32 33, 34,
35 36 37
38.1, 38.2,
40.1, 40.2,
41.1
39.1,
41.2
Steel
<35 HRC
Steel
36–48 HRC
PH and Ferritic
Stainless Steel
<35 HRC
PH and Ferritic
Stainless Steel
>35 HRC
Stainless Steel
Cast Iron
Wrought
Aluminium
Cast
Aluminium
Copper,
Copper Alloys
Iron Based
Cobalt Based
Nickel Based
Titanium Alloys
Hardened Steels
49–55 HRC
Hardened Steels
56–68 HRC
PMKN S H
page(s)
recommended
cutting
parameters
1, 2, 3,
4, 6, 7
5, 9,
10, 11 12, 13.1 13.2 14.1, 14.2,
14.3, 14.4
15, 16,
17, 18, 19 20 21 22, 23,
24, 25
26, 27,
28 31, 32 33, 34,
35 36 37
38.1, 38.2,
40.1, 40.2,
41.1
39.1,
41.2
Steel
<35 HRC
Steel
36–48 HRC
PH and Ferritic
Stainless Steel
<35 HRC
PH and Ferritic
Stainless Steel
>35 HRC
Stainless Steel
Cast Iron
Wrought
Aluminium
Cast
Aluminium
Copper,
Copper Alloys
Iron Based
Cobalt Based
Nickel Based
Titanium Alloys
Hardened Steels
49–55 HRC
Hardened Steels
56–68 HRC
High-Performance Thread Mills
Selection Guide • Solid Carbide Thread Mills
High-Performance Thread Mills
WID_Master16_Taps_Y066_Y067_Metric_REBRAND.indd 67 10/30/15 3:05 PM
Y68
LViWID M 16 T Y068 Y069 M i REBRAND O b 23 2015 9 54 AM
widia.com
WU12PV
Coated carbide. PVD ne-grain carbide substrate with high-hardness TiCN coating.
Universal grade for thread milling most materials.
P
M
K
N
S
PSteel
MStainless Steel
KCast Iron
NNon-Ferrous
SHigh-Temp Alloys
HHardened Materials
Coatings are designed for
optimised tapping performance
in specifi c materials.
Grade
WU13PV
Coated carbide. PVD carbide substrate with heat-resistant TiAlN coating.
Universal grade for thread milling most materials.
P
M
K
N
S
WU16PV
Coated carbide. PVD two-layer coating with heat-resistant TiAlN base layer and low-
friction MoS2 top layer over carbide substrate. Use for thread milling most materials,
including high-hardness materials.
P
M
K
N
S
H
High-Performance Thread Mills
Grades and Grade Descriptions
wear
resistance toughness
Coating Grade Description 051015202530354045
WID_Master16_Taps_Y068_Y069_Metric_REBRAND.indd 68 10/30/15 3:05 PM
Y69
LViWID M 16 T Y068 Y069 M i REBRANDO b 23 20159 54AM
widia.com
WU13PV
High-Performance Thread Mills
Victory™ Solid Carbide Thread Mills • Blind and Through Holes
GTM11 • Through Coolant • Metric and Metric Fine
grade WU13PV
TiAlN
order # catalogue # D1 size D1 Ap1 max L LS D
cutting
edges
4138391 GTM115001 M3X0.5 2,4 6 42 28 4,0 3
4138502 GTM115012 M4X0.5 3,4 8 55 36 6,0 3
4138392 GTM115002 M4X0.7 3,2 9 55 36 6,0 3
4138503 GTM115013 M5X0.5 4,3 10 55 36 6,0 3
4138493 GTM115003 M5X0.8 4,0 11 55 36 6,0 3
4138504 GTM115014 M6X0.75 5,0 12 55 36 6,0 3
4138494 GTM115004 M6X1 4,8 12 55 36 6,0 3
4138505 GTM115015 M8X0.75 5,9 17 63 36 6,0 3
4138506 GTM115016 M8X1 5,9 16 63 36 6,0 3
4138495 GTM115005 M8X1.25 5,9 17 63 36 6,0 3
4138507 GTM115017 M10X1 7,9 20 70 36 8,0 3
4138496 GTM115006 M10X1.5 7,9 20 70 36 8,0 3
4138508 GTM115018 M12X1 9,9 24 80 40 10,0 4
4138509 GTM115019 M12X1.5 9,9 25 80 40 10,0 4
4138497 GTM115007 M12X1.75 9,9 25 80 40 10,0 4
4138510 GTM115020 M14X1.5 9,9 29 80 40 10,0 4
4138498 GTM115008 M14X2 11,6 29 90 45 12,0 4
4138511 GTM115021 M16X1.5 11,9 32 90 45 12,0 4
4138499 GTM115009 M16X2 11,9 33 90 45 12,0 4
4138512 GTM115022 M18X1.5 13,9 37 90 45 14,0 4
4138500 GTM115010 M18X2.5 13,9 39 90 45 14,0 4
4138513 GTM115023 M20X1.5 13,9 41 90 45 14,0 4
4138501 GTM115011 M20X2.5 13,9 41 90 45 14,0 4
rst choice
alternate choice
metric dimensions
Shank Tolerance
D mm tolerance h6
6 +0, -0,008
8–10 +0, -0,009
12–18 +0, -0,011
20–30 +0, -0,013
High-Performance Thread Mills
WID_Master16_Taps_Y068_Y069_Metric_REBRAND.indd 69 10/30/15 3:05 PM
Y70
LViWID M 16 T Y070 Y071 M i REBRAND O b 23 2015 9 55 AM
widia.com
WU12PV
High-Performance Thread Mills
Victory™ Solid Carbide Thread Mills • Blind and Through Holes
Shank Tolerance
D mm tolerance h6
6 +0, -0,008
8–10 +0, -0,009
12–18 +0, -0,011
20–30 +0, -0,013
GTM21 • Through Coolant • Inch UNC and UNF
grade WU12PV
TiCN
order # catalogue # D1 TPI D1 DCH LTHD LDCH L LS D
cutting
edges
4138537 GTM215024 #10-32 3,8 5,13 9,95 10,53 55 36 6,0 3
4138530 GTM215017 1/4-20 4,7 6,65 13,36 14,23 62 36 8,0 3
4138538 GTM215025 1/4-28 5,2 6,65 13,19 13,84 62 36 8,0 3
4138531 GTM215018 5/16-18 6,2 8,25 16,26 17,19 74 40 10,0 3
4138539 GTM215026 5/16-24 6,6 8,25 16,44 17,15 74 40 10,0 3
4138532 GTM215019 3/8-16 7,7 9,83 19,89 20,85 80 45 12,0 3
4138540 GTM215027 3/8-24 8,2 9,83 19,62 20,31 80 45 12,0 3
4138533 GTM215020 7/16-14 9,0 11,43 22,72 23,79 80 45 12,0 3
4138541 GTM215028 7/16-20 9,6 11,43 22,28 23,08 80 45 12,0 3
4138534 GTM215021 1/2-13 10,4 13,00 26,43 27,60 90 45 14,0 4
4138542 GTM215029 1/2-20 11,1 13,00 26,10 26,89 90 45 14,0 4
4138535 GTM215022 9/16-12 11,8 14,61 30,75 31,99 100 48 16,0 4
4138543 GTM215030 9/16-18 12,5 14,61 28,99 29,88 100 48 16,0 4
4138536 GTM215023 5/8-11 13,1 16,18 33,54 34,89 102 48 18,0 4
4138544 GTM215031 5/8-18 14,1 16,18 33,24 34,09 102 48 18,0 4
High-Performance Thread Mills
rst choice
alternate choice
metric dimensions
WID_Master16_Taps_Y070_Y071_Metric_REBRAND.indd 70 10/30/15 3:05 PM
Y71
LViWID M 16 T Y070 Y071 M i REBRANDO b 23 20159 55AM
widia.com
WU12PV
High-Performance Thread Mills
Victory™ Solid Carbide Thread Mills • Blind and Through Holes
GTM21 • Through Coolant • Metric and Metric Fine
grade WU12PV
TiCN
order # catalogue # D1 size D1 DCH LTHD LDCH L LS D
cutting
edges
4138514 GTM215001 M5X0.8 4,0 5,30 10,82 11,40 55 36 6,0 3
4138521 GTM215008 M6X0.75 5,0 6,30 12,40 12,97 62 36 8,0 3
4138515 GTM215002 M6X1 4,8 6,30 12,52 13,19 62 36 8,0 3
4138522 GTM215009 M8X1 6,7 8,30 16,53 17,23 74 40 10,0 3
4138516 GTM215003 M8X1.25 6,5 8,30 16,91 17,71 74 40 10,0 3
4138523 GTM215010 M10X1 8,7 10,30 20,55 21,23 80 45 12,0 3
4138524 GTM215011 M10X1.25 8,4 10,30 20,67 21,50 80 45 12,0 3
4138517 GTM215004 M10X1.5 8,2 10,30 20,29 21,22 80 45 12,0 3
4138525 GTM215012 M12X1 10,6 12,30 24,56 25,27 90 45 14,0 4
4138526 GTM215013 M12X1.25 10,4 12,30 24,43 25,24 90 45 14,0 4
4138527 GTM215014 M12X1.5 10,1 12,30 24,80 25,76 90 45 14,0 4
4138518 GTM215005 M12X1.75 9,9 12,30 25,42 26,48 90 45 14,0 4
4138528 GTM215015 M14X1.5 12,1 14,30 29,31 30,25 100 48 16,0 4
4138519 GTM215006 M14X2 11,6 14,30 29,05 30,24 100 48 16,0 4
4138529 GTM215016 M16X1.5 14,0 16,30 32,31 33,30 102 48 18,0 4
4138520 GTM215007 M16X2 13,6 16,30 33,05 34,24 102 48 18,0 4
rst choice
alternate choice
metric dimensions
Shank Tolerance
D mm tolerance h6
6 +0, -0,008
8–10 +0, -0,009
12–18 +0, -0,011
20–30 +0, -0,013
High-Performance Thread Mills
WID_Master16_Taps_Y070_Y071_Metric_REBRAND.indd 71 10/30/15 3:05 PM
Y72
LViWID M 16 T Y072 Y073 M i REBRAND O b 23 2015 9 55 AM
widia.com
WU12PV
High-Performance Thread Mills
Victory™ Solid Carbide Thread Mills • Blind and Through Holes
Shank Tolerance
D mm tolerance h6
6 +0, -0,008
8–10 +0, -0,009
12–18 +0, -0,011
20–30 +0, -0,013
GTM31 • Through Coolant • Inch UNC and UNF
grade WU12PV
TiCN
order # catalogue # D1 TPI D1 D22 DCH LTHD LDCH L LS D
cutting
edges
4138561 GTM315021 1/4-20 4,9 5,2 6,65 12,80 15,87 62 36 8,0 2
4138568 GTM315028 1/4-28 5,3 5,5 6,65 12,79 15,35 62 36 8,0 2
4138562 GTM315023 5/16-18 6,3 6,6 8,25 15,63 19,19 74 40 10,0 2
4138569 GTM315030 5/16-24 6,6 6,9 8,25 15,98 19,07 74 40 10,0 2
4138563 GTM315017w 3/8-16 7,7 8,0 9,83 19,16 23,25 79 45 12,0 2
4138570 GTM315024 3/8-24 8,2 8,5 9,83 19,16 22,54 79 45 12,0 2
4138564 GTM315018 7/16-14 9,0 9,4 11,43 21,89 26,58 79 45 12,0 2
4138571 GTM315025 7/16-20 9,6 9,9 11,43 21,72 25,69 79 45 12,0 2
4138565 GTM315019 1/2-13 10,4 10,8 13,00 25,52 30,71 89 45 14,0 2
4138572 GTM315026 1/2-20 11,1 11,5 13,00 25,55 29,82 89 45 14,0 2
4138566 GTM315020 9/16-12 11,8 12,3 14,61 27,66 33,37 102 48 16,0 2
4138573 GTM315027 9/16-18 12,5 12,9 14,61 28,37 33,15 102 48 16,0 2
4138567 GTM315022 5/8-11 13,1 13,5 16,18 30,14 36,40 102 48 18,0 2
4138574 GTM315029 5/8-18 14,1 14,5 16,18 31,21 36,25 102 48 18,0 2
High-Performance Thread Mills
rst choice
alternate choice
metric dimensions
WID_Master16_Taps_Y072_Y073_Metric_REBRAND.indd 72 10/30/15 3:05 PM
Y73
LViWID M 16 T Y072 Y073 M i REBRANDO b 23 20159 55AM
widia.com
WU12PV
High-Performance Thread Mills
Victory™ Solid Carbide Thread Mills • Blind and Through Holes
GTM31 • Through Coolant • Metric and Metric Fine
grade WU12PV
TiCN
order # catalogue # D1 size D1 D22 DCH LTHD LDCH L LS D
cutting
edges
4138545 GTM315001 M4X0.7 3,2 3,3 4,30 7,74 9,59 49 36 6,0 2
4138546 GTM315002 M5X0.8 4,0 4,2 5,30 9,65 11,82 55 36 6,0 2
4138553 GTM315009 M6X0.75 5,1 5,3 6,30 12,07 14,37 62 36 8,0 2
4138547 GTM315003 M6X1 4,8 5,0 6,30 12,06 14,69 62 36 8,0 2
4138554 GTM315010 M8X1 6,8 7,0 8,30 16,09 19,10 74 40 10,0 2
4138548 GTM315004 M8X1.25 6,5 6,8 8,30 15,08 18,42 74 40 10,0 2
4138555 GTM315011 M10X1 8,7 9,0 10,30 20,11 23,52 79 45 12,0 2
4138556 GTM315012 M10X1.25 8,4 8,8 10,30 20,11 23,87 79 45 12,0 2
4138549 GTM315005 M10X1.5 8,2 8,5 10,30 19,59 23,65 79 45 12,0 2
4138557 GTM315013 M12X1.25 10,4 10,8 12,30 23,88 28,00 89 45 14,0 2
4138558 GTM315014 M12X1.5 10,2 10,5 12,30 24,12 28,57 89 45 14,0 2
4138550 GTM315006 M12X1.75 9,9 10,3 12,30 22,86 27,63 89 45 14,0 2
4138559 GTM315015 M14X1.5 12,1 12,5 14,30 27,14 31,98 102 48 16,0 2
4138551 GTM315007 M14X2 11,6 12,0 14,30 28,12 33,62 102 48 16,0 2
4138560 GTM315016 M16X1.5 14,1 14,5 16,30 31,65 36,87 102 48 18,0 2
4138552 GTM315008 M16X2 13,6 14,0 16,30 32,13 38,00 102 48 18,0 2
rst choice
alternate choice
metric dimensions
Shank Tolerance
D mm tolerance h6
6 +0, -0,008
8–10 +0, -0,009
12–18 +0, -0,011
20–30 +0, -0,013
High-Performance Thread Mills
WID_Master16_Taps_Y072_Y073_Metric_REBRAND.indd 73 10/30/15 3:05 PM
Y74
LViWID M 16 T Y074 Y075 M i REBRAND O b 23 2015 9 55 AM
widia.com
WU16PV
High-Performance Thread Mills
Victory™ Solid Carbide Thread Mills • Blind and Through Holes
Shank Tolerance
D mm tolerance h6
6 +0, -0,008
8–10 +0, -0,009
12–18 +0, -0,011
20–30 +0, -0,013
GTM41 • Through Coolant • Right Hand • Inch UNC and UNF
grade WU16PV
TiAlN+MoS2
order # catalogue # D1 TPI D1 D22 L3 L LS D
cutting
edges
4138610 GTM415025 1/4-20 4,64 3,34 17,00 60 36 8,0 3
4138617 GTM415033 1/4-28 4,66 3,62 17,00 60 36 8,0 3
4138611 GTM415026 5/16-18 5,64 4,12 21,90 76 40 10,0 4
4138618 GTM415034 5/16-24 5,64 4,48 21,90 76 40 10,0 4
4138612 GTM415027 3/8-16 7,16 5,42 26,30 76 40 10,0 4
4138619 GTM415035 3/8-24 7,14 6,00 26,30 76 40 10,0 4
4138613 GTM415028 7/16/14 8,47 6,49 31,00 86 45 12,0 4
4138620 GTM415036 7/16-20 8,45 7,06 33,00 86 45 12,0 4
4138606 GTM415029 1/2-13 10,08 7,95 33,40 86 45 12,0 4
4138615 GTM415037 1/2-20 8,45 7,06 33,00 86 45 12,0 4
4138614 GTM415030 9/16-12 11,28 8,98 41,00 98 48 16,0 4
4138621 GTM415038 9/16-18 11,27 9,72 41,00 98 48 16,0 4
4138607 GTM415031 5/8-11 12,89 10,40 42,00 98 48 16,0 4
4138616 GTM415039 5/8-18 12,38 10,83 42,00 98 48 16,0 4
4138608 GTM415032 3/4-10 15,50 12,77 51,30 111 50 20,0 5
4138609 GTM415040 3/4-16 15,38 13,65 51,30 111 50 20,0 5
High-Performance Thread Mills
rst choice
alternate choice
metric dimensions
WID_Master16_Taps_Y074_Y075_Metric_REBRAND.indd 74 10/30/15 3:05 PM
Y75
LViWID M 16 T Y074 Y075 M i REBRANDO b 23 20159 55AM
widia.com
WU16PV
High-Performance Thread Mills
Victory™ Solid Carbide Thread Mills • Blind and Through Holes
GTM41 • Through Coolant • Right Hand • Metric and Metric Fine
grade WU16PV
TiAlN+MoS2
order # catalogue # D1 size D1 D22 L3 L LS D
cutting
edges
4138576 GTM415001 M6X1 4,51 3,41 16,5 60 36 8,0 3
4138578 GTM415002 M7X1 4,51 3,41 16,5 60 36 8,0 3
4138592 GTM415014 M8X1 6,23 5,13 21,9 71 40 10,0 4
4138580 GTM415003 M8X1.25 6,23 4,91 21,9 71 40 10,0 4
4138593 GTM415015 M9X1 6,23 5,13 21,9 71 40 10,0 4
4138582 GTM415004 M9X1.25 6,23 4,91 21,9 71 40 10,0 4
4138594 GTM415016 M10X1 6,23 5,13 21,9 71 40 10,0 4
4138595 GTM415013 M10X1.25 6,23 4,91 21,9 71 40 10,0 4
4138584 GTM415005 M10X1.5 7,75 6,11 26,3 76 40 10,0 4
4138586 GTM415006 M11X1.5 7,75 6,11 26,3 76 40 10,0 4
4138596 GTM415017 M12X1 9,15 8,06 30,0 86 45 12,0 4
4138598 GTM415007 M12X1.5 7,75 6,11 26,3 76 40 10,0 4
4138587 GTM415008 M12X1.75 9,16 7,21 32,4 86 45 12,0 4
4138599 GTM415018 M14X1 9,15 8,06 30,0 86 45 12,0 4
4138600 GTM415019 M14X1.5 10,83 9,15 37,4 98 48 16,0 4
4138588 GTM415009 M14X2 11,08 8,91 41,0 98 48 16,0 4
4138601 GTM415020 M16X1.5 10,83 9,15 37,4 98 48 16,0 4
4138589 GTM415010 M16X2 11,08 8,91 41,0 98 48 16,0 4
4138602 GTM415021 M18X1.5 14,83 13,15 47,0 98 48 16,0 4
4138590 GTM415011 M18X2.5 14,38 11,71 51,3 111 50 20,0 5
4138603 GTM415022 M20X1.5 14,83 13,15 47,0 98 48 16,0 4
4138591 GTM415012 M20X2.5 14,38 11,71 51,3 111 50 20,0 5
4138604 GTM415023 M22X1.5 18,23 16,55 56,0 111 50 20,0 5
4138605 GTM415024 M24X1.5 18,23 16,55 56,0 111 50 20,0 5
rst choice
alternate choice
metric dimensions
Shank Tolerance
D mm tolerance h6
6 +0, -0,008
8–10 +0, -0,009
12–18 +0, -0,011
20–30 +0, -0,013
High-Performance Thread Mills
WID_Master16_Taps_Y074_Y075_Metric_REBRAND.indd 75 10/30/15 3:05 PM
Y76
LViWID M 16 T Y076 Y077 M i REBRAND N b 11 2015 8 33 AM
widia.com
WU16PV
High-Performance Thread Mills
Victory™ Solid Carbide Thread Mills • Blind and Through Holes
Shank Tolerance
D mm tolerance h6
6 +0, -0,008
8–10 +0, -0,009
12–18 +0, -0,011
20–30 +0, -0,013
GTM41 • Through Coolant • Left Hand • Metric and Metric Fine
grade WU16PV
TiAlN+MoS2
order # catalogue # D1 size D1 D22 L3 L LS D
cutting
edges
4138575 GTM415041 M6X1 4,51 3,41 16,5 60 36 8,0 3
4138577 GTM415042 M7X1 4,51 3,41 16,5 60 36 8,0 3
4138579 GTM415043 M8X1.25 6,23 4,91 21,9 71 40 10,0 4
4138581 GTM415044 M9X1.25 6,23 4,91 21,9 71 40 10,0 4
4138583 GTM415045 M10X1.5 7,75 6,11 26,3 76 40 10,0 4
4138585 GTM415046 M11X1.5 7,75 6,11 26,3 76 40 10,0 4
4138597 GTM415047 M12X1.5 9,17 7,21 32,4 86 45 12,0 4
High-Performance Thread Mills
rst choice
alternate choice
metric dimensions
WID_Master16_Taps_Y076_Y077_Metric_REBRAND.indd 76 11/11/15 8:59 AM
Y77
LViWID M 16 T Y076 Y077 M i REBRANDN b 11 20158 33AM
widia.com
High-Performance Thread Mills
GTM11 and GTM21 • Metric
High-Performance Thread Mills
Application Data
Material
Group
Thread Mill GTM11 Thread Mill • Chamfer GTM21
Cutting Speed — vc Feed/Tooth
by Diameter
Cutting Speed — vc Feed/Tooth
by Diameter
Range — m/min Range — m/min
min
Starting
Value max <10mm >10mm min
Starting
Value max <10mm >10mm
P
1
90
115
150 mm
0,05
0,08 140
185
240 mm
0,06
0,10
2
90
115
150 mm
0,05
0,08 140
185
240 mm
0,06
0,10
3
40
50
70 mm
0,02
0,03 70
90
120 mm
0,03
0,04
4
–
–
––
–
–70
90
120 mm
0,03
0,04
5
60
80
100 mm
0,04
0,06 70
90
120 mm
0,05
0,08
6
–
–
––
–
––
–
––
–
–
M
1
60
80
100 mm
0,04
0,06 70
90
120 mm
0,05
0,08
2
60
80
100 mm
0,04
0,06 70
90
120 mm
0,05
0,08
3
–
–
––
–
––
–
––
–
–
K
1
120
150
200 mm
0,06
0,10 130
170
220 mm
0,06
0,11
2
120
150
200 mm
0,06
0,10 130
170
220 mm
0,06
0,11
3
90
115
150 mm
0,05
0,07 110
140
180 mm
0,05
0,07
N
1
200
225
250 mm
0,05
0,06 270
300
330 mm
0,08
0,16
2
170
190
210 mm
0,04
0,05 160
175
190 mm
0,08
0,16
3
250
275
300 mm
0,07
0,09 270
300
330 mm
0,08
0,16
4
250
275
300 mm
0,07
0,09 270
300
330 mm
0,08
0,16
5
270
300
330 mm
0,12
0,13 250
275
300 mm
0,11
0,20
6
170
190
210 mm
0,05
0,06 90
100
110 mm
0,11
0,20
S
1
60
80
100 mm
0,04
0,06 70
90
120 mm
0,05
0,08
2
50
65
80 mm
0,03
0,04 50
60
80 mm
0,03
0,05
3
50
65
80 mm
0,03
0,04 50
60
80 mm
0,03
0,05
4
50
65
80 mm
0,03
0,04 50
60
80 mm
0,03
0,05
Material
Group
Drill • Chamfer • Thread Mill GTM31
Drilling Milling
Cutting Speed — vc Recommended Feed
by Diameter
Feed/Tooth
by Diameter
Range — m/min
min
Starting
Value max <6mm 6–10mm 10–16mm <6mm 6–10mm 10–16mm
K1
130
175
230 mm/r
0,10 0,16
0,30 mm
0,05 0,07
0,10
N
1
270
300
330 mm/r
0,15 0,25
0,34 mm
0,06 0,08
0,12
2
140
150
170 mm/r
0,15 0,25
0,34 mm
0,06 0,08
0,12
4
270
300
330 mm/r
0,15 0,25
0,34 mm
0,06 0,08
0,12
5
110
120
130 mm/r
0,12 0,20
0,32 mm
0,06 0,08
0,12
NOTE: For thread depths over 2 x D up to 3 x D, reduce speed and feed by 25%.
GTM31 • Metric
WID_Master16_Taps_Y076_Y077_Metric_REBRAND.indd 77 11/11/15 8:59 AM
Y78
LViWID M 16 T Y078 Y079 M i REBRAND N b 10 2015 4 15 PM
widia.com
High-Performance Thread Mills
Application Data
High-Performance Thread Mills
Material
Group
Mill • Chamfer • Thread Mill GTM41
Cutting Speed — vc Feed/Tooth
by Diameter
Range — m/min
TM Style Grade min
Starting
Value max < 10mm >10mm
P
1
GTM41 R WU16PV 170
225
290 mm
0,05
0,08
2
GTM41 R WU16PV 170
225
290 mm
0,05
0,08
3
GTM41 R WU16PV 120
150
200 mm
0,03
0,05
4
GTM41 R WU16PV 100
125
160 mm
0,03
0,05
5
GTM41 R WU16PV 120
150
200 mm
0,03
0,04
6
GTM41 R WU16PV 60
80
100 mm
0,03
0,04
M
1
GTM41 R WU16PV 120
150
200 mm
0,03
0,04
2
GTM41 R WU16PV 120
150
200 mm
0,03
0,04
3
GTM41 R WU16PV 120
150
200 mm
0,03
0,04
K
1
GTM41 R WU16PV 190
250
330 mm
0,06
0,10
2
GTM41 R WU16PV 190
250
330 mm
0,06
0,10
3
GTM41 R WU16PV 140
185
240 mm
0,04
0,07
N
1
–––
–
––
–
–
2
GTM41 R WU16PV 180
230
300 mm
0,06
0,07
3
–––
–
––
–
–
4
GTM41 R WU16PV 210
275
360 mm
0,06
0,07
5
–––
–
––
–
–
6
GTM41 R WU16PV 210
275
360 mm
0,06
0,07
S
1
GTM41 L WU16PV 120
150
200 mm
0,025
0,045
2
GTM41 L WU16PV 50
60
80 mm
0,015
0,025
3
GTM41 L WU16PV 50
60
80 mm
0,015
0,025
4
GTM41 L WU16PV 70
90
120 mm
0,025
0,035
H
1
GTM41 WU16PV 80
100
130 mm
0,030
0,050
2
GTM41 WU16PV 80
100
130 mm
0,030
0,050
3
GTM41 WU16PV 50
65
80 mm
0,020
0,030
4
GTM41 WU16PV 50
65
80 mm
0,020
0,030
NOTE: For thread depths over 2 x D up to 3 x D, reduce speed and feed by 25%.
Universal Thread Mills • GTM41 • Metric
WID_Master16_Taps_Y078_Y079_Metric_REBRAND.indd 78 11/10/15 5:04 PM
Y79
LViWID M 16 T Y078 Y079 M i REBRANDN b 10 20154 15PM
widia.com
Thread Milling Methods
Climb Milling
High-Performance Thread Mills
CNC Programming Instructions
Conventional Milling
Counter Feed FkCentre Point Feed Fm
Fk = n • fz • Z [mm/min]
Counter Feed (Fk)
Centre Point Feed (Fm)
Dw = Tool diameter [mm]
n = RPM [min-1]
fz = Feed per tooth [mm]
Z = Number of teeth on tool (radial)
D = Nominal diameter of thread = Diameter of external contour [mm]
Dm = Diameter of the centre point (D-Dw) [mm]
High-Performance Thread Mills
B
h = max
B
A
Properties:
Tool rotation direction clockwise
Tool moves clockwise
Pitch downwards
Right-hand thread
Conventional milling is always when the
cutting edge goes out of the material with
a chip thickness h = max
Properties:
Tool rotation direction clockwise
Tool moves anti-clockwise
Pitch upwards
Right-hand thread
Climb milling is always when the cutting
edge goes out of the material with a chip
thickness h = 0
F
m = [mm/min]
Fk • (D-Dw)
D
WID_Master16_Taps_Y078_Y079_Metric_REBRAND.indd 79 11/10/15 5:04 PM
Y80
LViWID M 16 T Y080 Y081 M i REBRAND N b 13 2015 9 16 AM
widia.com
Thread Mill GTM21
High-Performance Thread Mills
CNC Programming Instructions
High-Performance Thread Mills
Positioning the tool N 10 G 54 G 90 G 00 X… Y… Z 2 S 9709 T01 2M03
Advancing tool to full thread depth N 20 G 91 Z-21.200
Countersinking N 30 G 01 Z-2 F 2913 (countersink)
Raise N 40 G 00 Z 3.450
Moving sideways to the starting point N 50 G 42 G01 X 4.250 F 1311 (milling, 1/2 contour) [F 236] 3(milling,1/2 centre point)
Run-in loop in arc N 60 G 02 X-9.25 Y 0.000 Z-0.750 I-4.625 J 0
Thread milling N 70 G 02 X 0 Y 0 Z-1.500 I 5 J 0.000 F2622 [F 472] 3(centre point)
Run-out loop in arc N 80 G 02 X 9.25 Y 0.000 Z-0.750 I 4.625 J 0
Exit N 90 G 40 G 01 X-4.25
Retracting tool to positioning level N 100 G 90 G 00 Z 2
Preparation Drilling of thread hole
Process Principle Countersinking, thread milling (conventional milling)
Cycle
Required Specification Values
Example
Size — M10-6H
Thread diameter D .........................................10mm
Pitch ............................................................. 1,5mm
Core hole diameter D1 .................................. 8,5mm
Material — Cast aluminium
Grade — WU12PV
Tool — GTM21
Catalogue number ................................................GTM215004
Number of teeth Z .................................................................. 3
Tool diameter d1 ..........................................................8,2mm*
Tool radius compensation k1 ..................................... 0,1mm**
Tool radius to be programmed2 ...................................4mm***
Countersink depth ls ................................................... 21,2mm
Cutting speed vc ..................................................... 250 m/min
Feed (countersinking) fs ............................................0,3 mm/U
Feed (milling) fz ................................................0,09 mm/tooth
*(measured on the cutting part) **(0.01 x D) ***(1/2 d1 - k)
Program to DIN 66025 (conventional milling, on the contour, incremental)
1.4 seconds
NOTES:
1 The cutter radius measured over the tooth crests of the threaded part must be reduced by the amount of the cutter radius compensation. This is necessary to achieve a depth of cut to the middle
of the 6H/ISO2 nut tolerance. Please note, however, that this also depends on the radial deflection of the tool (tensile strength of the material, projecting length of the tool).
2 The cutter radius to be programmed is normally included in the tool memory.
3 The feed values in brackets must be used for controllers, which do not calculate the centre point feed themselves.
Cutting time th
Positioning Countersinking Raise Run-in loop for
thread milling
Thread milling Run-out loop Returning to
positioning level
N= Vc • 1000 S = 9709
d1 • /
vs=f
s • n F = 2913
(countersinking)
vf=f
z • Z • n F = 2622
(contour)
vf=
vf contour • (D-d1)
F=
472
(centre point)
D
WID_Master16_Taps_Y080_Y081_Metric_REBRAND.indd 80 11/13/15 9:40 AM
Y81
LViWID M 16 T Y080 Y081 M i REBRANDN b 13 20159 16AM
widia.com
Drill Thread Mill GTM41 • Right Hand
Preparation None
Process Principle Milling thread and core hole, countersinking (conventional milling)
Cycle
Required Specification Values
Example
Size — M10-6H
Thread diameter D .........................................10mm
Pitch ............................................................. 1,5mm
Core hole diameter D1 .................................. 8,5mm
Material — Hard steel, 50 HRC
Grade — WU16PV
Tool — GTM41 Right Hand
Catalogue number ................................................GTM415005
Number of teeth Z .................................................................. 4
Tool diameter d1 ........................................................7,75mm*
Tool radius compensation k1 ................................... 0,08mm**
Tool radius to be programmed2 ............................3,795mm***
Thread depth b ..............................................................20mm
Cutting speed vc ..................................................... 100 m/min
Feed (milling) fz ................................................0,04 mm/tooth
Number of turns5 ................................................................17
*(measured on the cutting part) **(0.01 x D; adjust to application) ***(1/2 d1 - k)
Program to DIN 66025 (conventional milling, on the contour, incremental)
51.6 seconds
NOTES:
1 The cutter radius measured over the tooth crests of the threaded part must be reduced by the amount of the cutter radius compensation. This is necessary to achieve a depth of cut to the middle
of the 6H/ISO2 nut tolerance. Please note, however, that this also depends on the radial deflection of the tool (tensile strength of the material, projecting length of the tool).
2 The cutter radius to be programmed is normally included in the tool memory.
3 The thread depth b must be divisible by the thread pitch P.
4 The feed values in brackets must be used for controllers, which do not calculate the centre point feed themselves.
5 Set N40 must be repeated with the number of threads. Repetitions N = thread depth b/pitch P (rounded up to the nearest integer).
Cutting time th
High-Performance Thread Mills
CNC Programming Instructions
Positioning Moving sideways to
the starting point
Thread milling
(clockwise)
Exit Returning to
positioning level
N= Vc • 1000 S = 4109
d1 • /
vf=f
z • Z • n F = 657
(contour)
N= vf contour • (D-d1)
F=
148
(centre point)
D
High-Performance Thread Mills
Positioning the tool N 10 G 54 G 90 G 00 X… Y… Z 1.500 S 4109 T01 2M03 6
Incremental programming N 20 G 91
Moving sideways to the starting point N 30 G 42 G 01 X 0 Y-5 F 657 (contour) [F 148] 4(centre point)
Thread milling N 40 G 02 X 0 Y 0 Z-1.500 I 0 J 5.000
Repeat thread milling … 5
Exit N 50 G 40 G 01 X 0 Y 5
Retracting tool to positioning level N 70 G 90 G 00 Z 2
WID_Master16_Taps_Y080_Y081_Metric_REBRAND.indd 81 11/13/15 9:40 AM
Y82
LViWID M 16 T Y082 Y083 M i REBRAND N b 13 2015 9 18 AM
widia.com
Drill Thread Mill GTM41 • Left Hand
Preparation None
Process Principle Milling thread and core hole, countersinking (climb milling)
Cycle
Required Specification Values
Example
Size — M10-6H
Thread diameter D .........................................10mm
Pitch ............................................................. 1,5mm
Core hole diameter D1 .................................. 8,5mm
Material — TiAl6V4 titanium
Grade — WU16PV
Tool — GTM41 Left Hand
Catalogue number ................................................GTM415005
Number of teeth Z .................................................................. 4
Tool diameter d1 ........................................................7,75mm*
Tool radius compensation k1 ................................... 0,08mm**
Tool radius to be programmed2 ............................3,795mm***
Thread depth b ..............................................................20mm
Cutting speed vc ..................................................... 100 m/min
Feed (milling) fz ................................................0,03 mm/tooth
Number of turns5 ................................................................17
*(measured on the cutting part) **(0.01 x D) ***(1/2 d1 - k)
Program to DIN 66025 (climb milling, on the contour, incremental)
68.8 seconds
NOTES:
1 The cutter radius measured over the tooth crests of the threaded part must be reduced by the amount of the cutter radius compensation. This is necessary to achieve a depth of cut to the middle
of the 6H/ISO2 nut tolerance. Please note, however, that this also depends on the radial deflection of the tool (tensile strength of the material, projecting length of the tool).
2 The cutter radius to be programmed is normally included in the tool memory.
3 The thread depth b must be divisible by the thread pitch P.
4 The feed values in brackets must be used for controllers, which do not calculate the centre point feed themselves.
5 Set N40 must be repeated with the number of threads. Repetitions N = thread depth b/pitch P (rounded up to the nearest integer).
Cutting time th
High-Performance Thread Mills
CNC Programming Instructions
Positioning Moving sideways to
the starting point
Thread milling
(anti-clockwise) Exit Returning to
positioning level
Positioning the tool N 10 G 54 G 90 G 00 X… Y… Z 1.500 S 4109 T01 2M04
Incremental programming N 20 G 91
Moving sideways to the starting point N 30 G 42 G 01 X 0 Y-5 F 493 (contour) [F 111] 4(centre point)
Thread milling N 40 G 02 X 0 Y 0 Z-1.500 I 0 J 5.000
Repeat thread milling … 5
Exit N 50 G 40 G 01 X 0 Y 5
Retracting tool to positioning level N 70 G 90 G 00 Z 2
N= Vc • 1000 S = 4109
d1 • /
vf=f
z • Z • n F = 493
(contour)
N= vf contour • (D-d1)F=
111
(centre point)
D
High-Performance Thread Mills
WID_Master16_Taps_Y082_Y083_Metric_REBRAND.indd 82 11/13/15 9:40 AM
Y83
LViWID M 16 T Y082 Y083 M i REBRANDN b 13 20159 18AM
widia.com
Drill Thread Mill GTM31
Preparation Drilling of thread hole
Process Principle Drilling, countersinking, thread milling (climb milling)
Cycle
Required Specification Values
Example
Size — M10-6H
Thread diameter D .........................................10mm
Pitch ............................................................. 1,5mm
Core hole diameter D1 .................................. 8,5mm
Material — Grey cast iron
Grade — WU12PV
Tool — GTM31
Catalogue number ................................................GTM315005
Number of teeth Z .................................................................. 2
Tool diameter d1 ..........................................................8,2mm*
Tool radius compensation k1 ..................................... 0,1mm**
Tool radius to be programmed2 ...................................4mm***
Countersink depth ls ................................................. 19,11mm
Cutting speed vc ..................................................... 250 m/min
Feed (countersinking) fs ..........................................0,25 mm/U
Feed (milling) fz ..................................................0,1 mm/tooth
*(measured on the cutting part) **(0.01 x D) ***(1/2 d1 - k)
Program to DIN 66025 (climb milling, on the contour, incremental)
2.3 seconds
NOTES:
1 The cutter radius measured over the tooth crests of the threaded part must be reduced by the amount of the cutter radius compensation. This is necessary to achieve a depth of cut to the middle
of the 6H/ISO2 nut tolerance. Please note, however, that this also depends on the radial deflection of the tool (tensile strength of the material, projecting length of the tool).
2 The cutter radius to be programmed is normally included in the tool memory.
3 The feed values in brackets must be used for controllers, which do not calculate the centre point feed themselves.
Cutting time th
Positioning the tool N 10 G 54 G 90 G 00 X… Y… Z 2 S 9709 T01 2M03
Drilling and countersinking N 20 G 91 G 01 Z-21.110 F 2427 (drill, countersink)
Raise N 30 G 01 Z 0.500
Moving sideways to the starting point N 40 G 41 Y-4.250 F 971 (milling, 1/2 contour) [F 175] 3(1/2 centre point)
Run-in loop in arc N 50 G 03 X 0 Y 9.250 Z 0.750 I 0 J 4.625
Thread milling N 60 G 03 X 0 Y 0 Z 1.500 I 0 J -5.000
Run-out loop in arc N 70 G 03 X 0 Y-9.250 Z 0.750 I 0 J- 4.625 F1942 [F 350] 3(centre point)
Exit N 80 G 00 G 40 X 0 Y 4.250
Retracting tool to positioning level N 90 G 90 Z 2
Positioning Drilling and
countersinking Raise Run-in loop for
thread milling Thread milling Run-out loop Returning to
positioning level
High-Performance Thread Mills
CNC Programming Instructions
N= Vc • 1000 S = 9709
d1 • /
vs=f
b • n F = 2427 (drilling,
countersinking)
vf=f
z • Z • n F = 1942
(contour)
vf=
vf contour • (D-d1)F=
350
(centre point)
D
High-Performance Thread Mills
WID_Master16_Taps_Y082_Y083_Metric_REBRAND.indd 83 11/13/15 9:40 AM
Y84
LViWID M 16 T Y084 Y085 M i REBRAND N b 13 2015 9 19 AM
widia.com
High-Performance Taps
Application Data
High-Performance Taps
Carbide Taps • Metric
Through Holes Blind Holes
Range — m/min Range — m/min
Material
Group Tap Style Grade min
Starting
Value max Tap Style Grade min
Starting
Value max
P
P0
GX32, GX38 GP4535 60
100
130 GX33, GX39 GP4535 50
70
90
P1
GX32, GX38 GP4535 60
90
120 GX33, GX39 GP4535 40
60
80
P2
GX32, GX38 GP4535 50
85
110 GX33, GX39 GP4535 40
60
80
P3
GX32, GX38 GP4535 50
80
100 GX33, GX39 GP4535 40
60
80
K
K1
GX34, GX50 WK12PG 70
105
140 GX35, GX50 WK12PG 50
70
90
K2
GX34, GX50 WK12PG 60
100
130 GX35, GX50 WK12PG 50
70
90
K3
GX34, GX50 WK12PG 60
90
120 GX35, GX50 WK12PG 40
60
80
N
N2
GX46, GX48 WN14PG 80
120
160 GX47, GX49 WN14PG 60
80
100
N3
GX46, GX48 WN14PG 60
100
130 GX47, GX49 WN14PG 50
70
90
N4
GX46, GX48 WN14PG 60
90
120 GX47, GX49 WN14PG 40
60
80
HH3
GX10 WH16PG 1,2
1,5
2,0 GX10 WH16PG 0,8
1,1
1,4
H4
GX10 WH16PG 0,6
0,8
1,0 GX10 WH16PG 0,4
0,5
0,7
WID_Master16_Taps_Y084_Y085_Metric_REBRAND.indd 84 11/13/15 9:40 AM
Y85
LViWID M 16 T Y084 Y085 M i REBRANDN b 13 20159 19AM
widia.com
High-Performance Taps
Application Data
High-Performance Taps
HSS-E-PM Taps • Metric
Through Holes Blind Holes
Range — m/min Range — m/min
Material
Group Tap Style Grade min
Starting
Value max Tap Style Grade min
Starting
Value max
P
P1
GT20 GP6520 20
30
45 GT30, GT32, GT50 GP6520 14
21
32
GT24 WU32MG 20
30
45 GT24, GT26 WU32MG 14
21
32
P2
GT20 GP6520 17
25
38 GT30, GT32, GT50 GP6520 12
18
26
GT24 WU32MG 17
25
38 GT24, GT26 WU32MG 12
18
26
P3
GT20 GP6520 12
15
20 GT30, GT32, GT50 GP6520 8
11
14
P4
GT00 WP31MG 5
6
8 GT02, GT04 WP31MG 3
4
5
P5
GT20 GP6520 12
15
20 GT30, GT32, GT50 GP6520 8
11
14
P6
GT00 WP31MG 6
8
10 GT02, GT04 WP31MG 4
6
7
M
M1
GT20 GM6515 12
15
20 GT30, GT32, GT50 GM6515 8
11
14
GT24 WU32MG 5
8
12 GT24, GT26 WU32MG 4
6
8
M2
GT20 GM6515 9
12
16 GT30, GT32, GT50 GM6515 6
8
11
M3
GT00 WP31MG 4
5
7 GT02, GT04 WP31MG 3
4
5
KK1
GT40 GP6520 27
35
46 GT40, GT42 GP6520 19
25
32
K2
GT40 GP6520 23
30
39 GT40, GT42 GP6520 16
21
27
N
N1
GT72 WN44EG 33
50
65 GT82, GT86 WN44EG 23
35
46
GT22 WN48EG 37
55
72 GT22 WN48EG 26
39
50
N2
GT40 GP6520 30
45
59 GT40, GT42 GP6520 21
32
41
GT72 WN44EG 30
45
59 GT82, GT86 WN44EG 21
32
41
GT22 WN38MG 33
50
65 GT22 WN38MG 23
35
46
N4
GT40 GP6520 7
10
15 GT40, GT42 GP6520 5
7
11
S
S1
GT20 GP6520 8
12
18 GT30, GT32 GP6520 6
8
13
S2, S3
GT90 WU32MG 3,3
5,0
7,5 GT92, GT94 WU32MG 2,3
3,5
5,3
GT90 WS39MG 1,7
2,5
3,8 GT92, GT94 WS39MG 1,2
1,8
2,6
S4
GT60 WS34MG 2,7
4,0
6,0 GT62 WS34MG 1,9
2,8
4,2
GT60 WS30MG 1,3
2,0
3,0 GT62 WS30MG 0,9
1,4
2,1
HH1
GT06 WN35MG 1,3
2,0
3,0 GT06 WN35MG 0,9
1,4
2,1
H2
GT06 WN35MG 1,0
1,5
2,3 GT06 WN35MG 0,7
1,1
1,6
NOTE: Increase speed by up to 25% when using coolant taps (GT21, GT23, GT31, GT33 GT41, GT43, and GT51). Use grade GP6505
™
in steels.
Use 50% of the recommended speed listed for grade GP6520
™
.
WID_Master16_Taps_Y084_Y085_Metric_REBRAND.indd 85 11/13/15 9:40 AM
Y86
LViWID M 16 T Y086 Y087 M i REBRAND N b 13 2015 9 20 AM
widia.com
High-Performance Taps
Application Data • VariTap™
High-Performance Taps
VariTap • HSS-E • Metric
Through Holes Blind Holes
Range — m/min Range — m/min
Material
Group Tap Style Grade min
Starting
Value max Tap Style Grade min
Starting
Value max
P
P1
VT-SPO WP42EG, WU41EG 21
27
34 VT-SFT WP42EG, WU41EG 13
18
26
VT-SPO WP49EG, WU40EG 10
14
17 VT-SFT WP49EG, WU40EG 6
9
13
P2
VT-SPO WP42EG, WU41EG 16
21
27 VT-SFT WP42EG, WU41EG 11
15
22
VT-SPO WP49EG, WU40EG 8
11
13 VT-SFT WP49EG, WU40EG 4
6
9
P3
VT-SPO WP42EG, WU41EG 9
12
15 VT-SFT WP42EG, WU41EG 6
9
13
VT-SPO WP49EG, WU40EG 5
6
8 VT-SFT WP49EG, WU40EG 2
3
4
VT-STR NPT WU41EG 5
6
8 VT-STR NPT WU41EG 5
6
8
VT-STR NPT WU40EG 2
3
4 VT-STR NPT WU40EG 2
3
4
M
M1
VT-SPO WP42EG, WU41EG 9
12
15 VT-SFT WP42EG, WU41EG 6
9
13
VT-SPO WP49EG, WU40EG 5
6
8 VT-SFT WP49EG, WU40EG 2
3
4
VT-SFT NPT WU41EG 5
6
8 VT-SFT NPT WU41EG 5
6
8
VT-SFT NPT WP49EG, WU40EG 2
3
4 VT-SFT NPT WP49EG, WU40EG 2
3
4
M3
VT-SPO WP42EG, WU41EG 7
9
11 VT-SFT WP42EG, WU41EG 4
6
9
VT-SPO WP49EG, WU40EG 3
5
6 VT-SFT WP49EG, WU40EG 2
3
4
K
K1
VT-STR NPT WU41EG 10
14
17 VT-STR NPT WU41EG 10
14
17
VT-STR NPT WU40EG 6
8
10 VT-STR NPT WU40EG 6
8
10
K2
VT-SPO WP42EG, WU41EG 21
27
34 VT-SFT WP42EG, WU41EG 13
18
26
VT-SPO WP49EG, WU40EG 10
14
17 VT-SFT WP49EG, WU40EG 6
9
13
N
N1
VT-SPO WP42EG, WU41EG 34
46
57 VT-SFT WP42EG, WU41EG 23
34
48
VT-SPO WU40EG 17
23
29 VT-SFT WU40EG 11
15
22
N2
VT-SPO WP42EG, WU41EG 30
40
50 VT-SFT WP42EG, WU41EG 19
27
39
VT-SPO WU40EG 15
20
25 VT-SFT WU40EG 11
15
22
N4
VT-SPO WP42EG, WU41EG 7
9
11 VT-SFT WP42EG, WU41EG 4
6
9
VT-SPO WU40EG 3
5
6 VT-SFT WU40EG 2
3
4
* Grades: WP42EG = TiCN
WU41EG = TiN
WP49EG = oxide
WU40EG = bright
WID_Master16_Taps_Y086_Y087_Metric_REBRAND.indd 86 11/13/15 9:40 AM
LViWID M 16 T Y086 Y087 M i REBRANDN b 13 20159 20AM
Global Reconditioning Network
To use WIDIA tool reconditioning services, contact your authorised
WIDIA distributor to get started.
Reconditioning Services
Anyone can regrind our tools –
but only we can recondition them
WIDIA™ Reconditioning Services optimise the value of metalcutting tools
throughout their entire lifecycle by giving like-new performance — with rapid
turnaround time — so tools are always on hand and perform just like new.
Huntley, IL
Kingwinford, UK
Istanbul, Turkey
Shlomi, Israel
Tianjin, China
Shanghai, China
Busan, Korea
Bangalore, India
Zory, Poland
Gurgaon, India
Pune, India
Koenigsee, Germany
Barcelona, Spain Milan,
Italy
Indaiatuba,
Brazil
Whitehouse, OH
Asheboro, NC
To locate a Reconditioning Center near you, visit widia.com/services.
WID_Master16_Taps_Y086_Y087_Metric_REBRAND.indd 87 11/13/15 9:40 AM
Y88
LViWID M 16 T Y088 Y089 M i REBRAND N b 10 2015 4 29 PM
widia.com
Technical Information
Illustrations of Tap Terms
max tap major
diameter
basic major
diameter
basic pitch diameter
base of thread
basic root
tap crest
basic crest
ank
basic height of
thread
basic minor diameter
angle of thread
min tap
major
diameter
pitch
cutting
face
cutting edge relief to cutting edge
concentric margin
eccentric relief
Concentric Eccentric Relief Con-Eccentric Relief
tap major diameter
basic minor diameter
Negative Hook 0º Hook Positive Hook
Negative Rake Radial Rake Positive Rake
no relief
heel
Reprinted with permission from United States Cutting Tool Institute (USCTI). Published by Kennametal Inc. © 2014. All rights reserved.
Technical Information
WID_Master16_Taps_Y088_Y089_Metric_REBRAND.indd 88 11/10/15 5:04 PM
Y89
LViWID M 16 T Y088 Y089 M i REBRANDN b 10 20154 29PM
widia.com
Technical Information
Tap Chamfers
Tap Chamfers • ANSI Taps
Taper Chamfer
7–10 Pitches
Taper (7–10 pitches)
The taper chamfer has the
longest standard chamfer
ensuring easier starting. It
requires less tapping torque
because of more working teeth.
Plug Chamfer
3–5 Pitches
Plug (3–5 pitches)
The most common chamfer
for use by hand or machine
in through or blind holes. This
chamfer is more efcient
than a bottoming or modied
bottoming chamfer.
Modified Bottoming Chamfer
2–2.5 Pitches
Full Bottoming Chamfer
1–2 Pitches
Semi-Bottom (2–2.5 pitches)
This short chamfer enables
threading close to the bottom
of blind holes. Due to the slightly
longer chamfer and more
working teeth, this chamfer is
more efcient than a bottoming
chamfer.
Tap Chamfers
Bottoming (1–2 pitches)
For threading close to the
bottom of blind holes, the
bottoming chamfer is the
least efcient chamfer
available.
Taper Chamfer
7–10 Pitches
Plug Chamfer
3–5 Pitches
Modified Bottoming Chamfer
2–2.5 Pitches
Full Bottoming Chamfer
1–2 Pitches
Tap Chamfers • DIN Taps
Form A (6–8 pitches)
The Form A chamfer has the
longest standard chamfer
ensuring easier starting. It
requires less tapping torque
because of more working teeth.
Form B/D (3.5–5 pitches)
The most common chamfers
for use by hand or machine in
through or blind holes. Form B
applies to spiral-point taps and
Form D applies to straight-ute
and spiral-ute taps. This chamfer
is more efcient than Form E or
Form C chamfer.
Form C (2–2.5 pitches)
This short chamfer enables
threading close to the bottom
of blind holes. Due to the slightly
longer chamfer and more working
teeth, this chamfer is more
efcient than a Form E chamfer.
Form E (1.5–2 pitches)
For threading close to the
bottom of blind holes, the
Form E chamfer is the least
efcient chamfer available.
Hand Tap Chamfers
Technical Information
WID_Master16_Taps_Y088_Y089_Metric_REBRAND.indd 89 11/10/15 5:04 PM
Y90
LViWID M 16 T Y090 Y091 M i REBRAND N b 10 2015 2 06 PM
widia.com
Technical Information
Standard Tap Dimensions • Ground Thread • Reference USCTI Table 302
nominal
diameter
range
(in)
machine
screw size
number
(in)
nominal
fractional
diameter
(in)
nominal
metric
diameter
mm (in)
blank
design
number
overall
length
L
thread
length
l
square
length
l2
shank
diameter
D1
square
size
A
.052–.065 0 (.0600) — M1.6 (.0630) 1 1.63 .31 .19 .1410 .110
.065–.078 1 (.0730) — M1.8 (.0709) 1 1.69 .38 .19 .1410 .110
.078–.091 2 (.0860) — M2 (0787), M2.2 (.0866) 1 1.75 .44 .19 .1410 .110
.091–.104 3 (.0990) — M2.5 (.0984) 1 1.81 .50 .19 .1410 .110
.104–.117 4 (.1120) — — — 1 1.88 .56 .19 .1410 .110
.117–.130 5 (.1250) — M3 (.1181) 1 1.94 .63 .19 .1410 .110
.130–.145 6 (.1380) — M3.5 (.1378) 1 2.00 .69 .19 .1410 .110
.145–.171 8 (.1640) — M4 (.1575) 1 2.13 .75 .25 .1680 .131
.171–.197 10 (.1900) — M4.5 (.1772), M5 (.1969) 1 2.38 .88 .25 .1940 .152
.197–.223 12 (.2160) — — — 1 2.38 .94 .28 .2200 .165
.223–.260 — 1/4 (.2500) M6 (.2362) 2 2.50 1.00 .31 .2550 .191
.260–.323 — 5/16 (.3125) M7 (.2756), M8 (.3150) 2 2.72 1.13 .38 .3180 .238
.323–.395 — 3/8 (.3750) M10 (.3937) 2 2.94 1.25 .44 .3810 .286
.395–.448 — 7/16 (.4375) — — 3 3.16 1.44 .41 .3230 .242
.448–.510 — 1/2 (.5000) M12 (.4724) 3 3.38 1.66 .44 .3670 .275
.510–.573 — 9/16 (.5625) M14 (.5512) 3 3.59 1.66 .50 .4290 .322
.573–.635 — 5/8 (.6250) M16 (.6299) 3 3.81 1.81 .56 .4800 .360
.635–.709 — 11/16 (.6875) M18 (.7087) 3 4.03 1.81 .63 .5420 .406
.709–.760 — 3/4 (.7500) — — 3 4.25 2.00 .69 .5900 .442
.760–.823 — 13/16 (.8125) M20 (.7874) 3 4.47 2.00 .69 .6520 .489
.823–.885 — 7/8 (.8750) M22 (.8661) 3 4.69 2.22 .75 .6970 .523
.885–.948 — 15/16 (.9375) M24 (.9449) 3 4.91 2.22 .75 .7600 .570
.948–1.010 — 1 (1.0000) M25 (.9843) 3 5.13 2.50 .81 .8000 .600
1.010–1.073 — 1-1/16 (1.0625) M27 (1.0630) 3 5.13 2.50 .88 .8960 .672
1.073–1.135 — 1-1/8 (1.1250) — — 3 5.44 2.56 .88 .8960 .672
1.135–1.198 — 1-3/16 (1.1875) M30 (1.1811) 3 5.44 2.56 1.00 1.0210 .766
1.198–1.260 — 1-1/4 (1.2500) — — 3 5.75 2.56 1.00 1.0210 .766
1.260–1.323 — 1-5/16 (1.3125) M33 (1.2992) 3 5.75 2.56 1.06 1.1080 .831
1.323–1.385 — 1-3/8 (1.3750) — — 3 6.06 3.00 1.06 1.1080 .831
1.358–1.448 — 1-7/16 (1.4375) M36 (1.4173) 3 6.06 3.00 1.13 1.2330 .925
1.448–1.510 — 1-1/2 (1.5000) — — 3 6.38 3.00 1.13 1.2330 .925
1.510–1.635 — 1-5/8 (1.6250) M39 (1.5354) 3 6.69 3.19 1.13 1.3050 .979
1.635–1.760 — 1-3/4 (1.7500) M42 (1.6535) 3 7.00 3.19 1.25 1.4300 1.072
1.760–1.885 — 1-7/8 (1.8750) — — 3 7.31 3.56 1.25 1.5190 1.139
1.885–2.010 — 2 (2.0000) M48 (1.8898) 3 7.63 3.56 1.38 1.6440 1.233
2.010–2.135 — 2-1/8 (2.1250) — — 3 8.00 3.56 1.38 1.7690 1.327
2.135–2.260 — 2-1/4 (2.2500) M56 (2.2047) 3 8.25 3.56 1.44 1.8940 1.420
2.260–2.385 — 2-3/8 (2.3750) — — 3 8.50 4.00 1.44 2.0190 1.514
2.385–2.510 — 2-1/2 (2.5000) — — 3 8.75 4.00 1.50 2.1000 1.575
2.510–2.635 — 2-5/8 (2.6250) M64 (2.5197) 3 8.75 4.00 1.50 2.2250 1.669
2.635–2.760 — 2-3/4 (2.7500) — — 3 9.25 4.00 1.56 2.3500 1.762
2.760–2.885 — 2-7/8 (2.8750) M72 (2.8346) 3 9.25 4.00 1.56 2.4750 1.856
2.885–3.010 — 3 (3.0000) — — 3 9.75 4.56 1.63 2.5430 1.907
3.010–3.135 — 3-1/8 (3.1250) — — 3 9.75 4.56 1.63 2.6680 2.001
3.135–3.260 — 3-1/4 (3.2500) M80 (3.1496) 3 10.00 4.56 1.75 2.7930 2.095
3.260–3.385 — 3-3/8 (3.3750) — — 3 10.00 4.56 1.75 2.8830 2.162
3.385–3.510 — 3-1/2 (3.5000) — — 3 10.25 4.94 2.00 3.0080 2.256
3.510–3.635 — 3-5/8 (3.6250) M90 (3.5433) 3 10.25 4.94 2.00 3.1330 2.350
3.635–3.760 — 3-3/4 (3.7500) — — 3 10.50 5.31 2.13 3.2170 2.413
3.760–3.885 — 3-7/8 (3.8750) — — 3 10.50 5.31 2.13 3.3420 2.506
3.885–4.010 — 4 (4.0000) M100 (3.9370) 3 10.75 5.31 2.25 3.4670 2.600
Blank Design 1 Blank Design 2 Blank Design 3
Reprinted with permission from United States Cutting Tool Institute (USCTI). Published by Kennametal Inc. © 2014. All rights reserved.
Technical Information
WID_Master16_Taps_Y090_Y091_Metric_REBRAND.indd 90 11/10/15 2:22 PM
Y91
LViWID M 16 T Y090 Y091 M i REBRANDN b 10 20152 06PM
widia.com
Technical Information
Optional Neck and Shortened Thread Length Dimensions • Reference USCTI Table 302A
Special Taps
Reprinted with permission from United States Cutting Tool Institute (USCTI).
Published by Kennametal Inc. © 2014. All rights reserved.
Technical Information
General Dimensions
Tolerances
element
nominal diameter
range (in) direction tolerance (in)
length overall — L .0520–1.0100 plus or minus .031
1.0100–4.0100 plus or minus .063
length of thread — l .0520–.2230 plus or minus .047
.2230–.5100 plus or minus .063
.5100–1.5100 plus or minus .094
1.5100–4.0100 plus or minus .125
length of square — l2 .0520–1.0100 plus or minus .031
1.0100–4.0100 plus or minus .063
diameter of shank — d1 .0520–.2230 minus .0015
.2230–.6350 minus .0015
.6350–1.0100 minus .0020
1.0100–1.5100 minus .0020
1.5100–2.0100 minus .0030
2.0100–4.0100 minus .0030
size of square — a .0520–.5100 minus .004
.5100–1.0100 minus .006
1.0100–2.0100 minus .008
2.0100–4.0100 minus .010
Reprinted with permission from United States Cutting Tool Institute (USCTI). Published by Kennametal Inc. © 2014. All rights reserved.
Tap Dimensions — Inches
nominal
diameter range
(in)
machine
screw
size number
(in)
nominal
fractional
diameter (in)
nominal
metric
diameter
mm (in)
blank
design
number
overall
length L
thread
length l
neck
length l1
square
length l2
shank
diameter
D1
square
size A
.104 .117 4 (.1120) —— — 1 1.88 .31 .25 .19 .1410 .110
.117 .130 5 (.1250) M3 (.1181) 1 1.94 .31 .31 .19 .1410 .110
.130 .145 6 (.1380) —M3.5 (.1378) 1 2.00 .38 .31 .19 .1410 .110
.145 .171 8 (.1640) M4 (.1575) 1 2.13 .38 .38 .25 .1680 .131
.171 .197 10 (.1900) —M4.5 (.1772) 1 2.38 .50 .38 .25 .1940 .152
M5 (.1969) — — — — — — —
.197 .223 12 (.2160) — — — — 1 2.38 .50 .44 .28 .2200 .165
.223 .260 1/4 (.2500) M6 (.2362) 2 2.50 .63 .38 .31 .2550 .191
.260 .323 —5/16 (.3125) M7, M8 (.2756), (.3150) 2 2.72 .69 .44 .38 .3180 .238
.323 .395 3/8 (.3750) M10 (.3937) 2 2.94 .75 .50 .44 .3810 .286
.395 .448 —7/16 (.4375) — — 3 3.16 .88 – .41 .3230 .242
.448 .510 1/2 (.5000) M12 (.4724) 3 3.38 .94 – .44 .3670 .275
.510 .573 —9/16 (.5625) M14 (.5541) 3 3.59 1.00 – .50 .4290 .322
.573 .635 5/8 (.6250) M16 (.6299) 3 3.81 1.09 – .56 .4800 .360
.635 .709 —11/16 (.6875) M18 (.7087) 3 4.03 1.09 – .63 .5420 .406
.709 .760 3/4 (.7500) — — 3 4.25 1.22 – .69 .5900 .442
.760 .823 —13/16 (.8125) M20 (.7874) 3 4.47 1.22 – .69 .6520 .489
.823 .885 7/8 (.8750) M22 (.8661) 3 4.69 1.34 – .75 .3670 .523
.885 .948 —15/16 (.9375) M24 (.9449) 3 4.91 1.34 – .75 .7600 .570
.948 1.010 1 (1.0000) M25 (.9843) 3 5.13 1.50 – .81 .8000 .600
NOTE: Thread length l is based on a length of 12 pitches of the UNC thread series. Thread length “l” is a minimum value and has no tolerance.
When thread length “l” is added to neck length “l1”, the total shall be no less than the minimum USCTI Table 302 thread length “l”.
Unless otherwise specified, all tolerances are in accordance with USCTI Table 302. For eccentricity tolerances, see USCTI Table 317.
Table 302 is provided for reference only. WIDIA-GTD
™
tap dimensions may differ.
Blank Design 1
Blank Design 2
Blank Design 3
Unless otherwise specied:
Special taps over 1.010–1.510" diameter inclusive, having 14 or more
threads per inch or 1,75mm pitch and ner, and sizes over 1.510"
diameter with 10 or more threads per inch or 2,5mm pitch and ner,
are made to general dimensions shown in USCTI Table 303.
Special tap thread limits are determined using the formulas shown
in USCTI Table 331 for Unied Inch Screw Threads and USCTI
Table 341 for metric m-prole screw threads.
NOTE:
Tap sizes .395" and smaller have an external centre on the thread end
(may be removed on bottoming taps). Sizes .125" and smaller have an
external centre on the shank end. Sizes .224–.395" have truncated partial
cone centres on the shank end (length of cone approximately 1/4 of
diameter of shank). Sizes over .395" have internal centres on both the
thread and shank ends.
For standard thread limits and tolerances for Unified Inch Screw Threads, see
USCTI Table 327, and for metric threads, see USCTI Table 337.
For eccentricity tolerances of tap elements, see USCTI Table 317.
WID_Master16_Taps_Y090_Y091_Metric_REBRAND.indd 91 11/10/15 2:22 PM
Y92
LViWID M 16 T Y092 Y093 M i REBRAND N b 13 2015 9 26 AM
widia.com
Technical Information
Standard Pipe Tap Dimensions • Straight and Taper • Ground Thread • Reference USCTI Table 311
Reprinted with permission from United States Cutting Tool Institute (USCTI).
Published by Kennametal Inc. © 2014. All rights reserved.
General Dimensions Tolerances
element range direction tolerance
length overall — L 1/16–3/4 inc. plus/minus .031
1–4 inc. plus/minus .063
length of thread — l 1/16–3/4 inc. plus/minus .063
1–1-1/4 inc. plus/minus .094
1-1/2–4 plus/minus .125
length of square — l2 1/16–3/4 inc. plus/minus .031
1–4 inc. plus/minus .063
diameter of shank — d1 1/16–1/8 minus .0015
1/4–1 inc. minus .0020
1-1/4–4 inc. minus .0030
size of square — a 1/16–1/8 minus .004
1/4–3/4 inc. minus .006
1–4 inc. minus .008
dimensions (in)
nominal
size
(in)
overall
length
L
thread
length
l
square
length
l2
shank
diameter
D1
square
size
A
optional
neck
length
l1
1/16 2.13 .69 .38 .3125 .234 .375
1/8 2.13 .75 .38 .3125 .234 –
1/8 2.13 .75 .38 .4375 .328 .375
1/4 2.44 1.06 .44 .5625 .421 .375
3/8 2.56 1.06 .50 .7000 .531 .375
1/2 3.13 1.38 .63 .6875 .515 –
3/4 3.25 1.38 .69 .9063 .679 –
1 3.75 1.75 .81 1.1250 .843 –
1-1/4 4.00 1.75 .94 1.3125 .984 –
1-1/2 4.25 1.75 1.00 1.5000 1.125 –
2 4.25 1.75 1.13 1.8750 1.406 –
2-1/2 5.50 2.56 1.25 2.2500 1.687 –
3 6.00 2.63 1.38 2.6250 1.968 –
3-1/2 6.50 2.69 1.50 2.8125 2.108 –
4 6.75 2.75 1.56 3.0000 2.250 –
Technical Information
WID_Master16_Taps_Y092_Y093_Metric_REBRAND.indd 92 11/13/15 9:40 AM
Y93
LViWID M 16 T Y092 Y093 M i REBRANDN b 13 20159 26AM
widia.com
Technical Information
Taper Pipe Tap Thread Limits • Ground Thread • Reference USCTI Table 338
Technical Information
Pipe Taps
taper per foot limits
length L1
tap drill size**
NPT, ANPT, NFTF
nominal
size
(in)
threads
per inch
projection*
(in)
projection
tolerance
+ / – min max
1/16 27 .312 .063 .719 .781 .160 C
1/8 27 .312 .063 .719 .781 .1615 Q
1/4 18 .459 .063 .719 .781 .2278 7/16
3/8 18 .454 .063 .719 .781 .240 9/16
1/2 14 .579 .063 .719 .781 .320 45/64
3/4 14 .565 .063 .719 .781 .339 29/32
1 11-1/2 .678 .094 .719 .781 .400 1-9/64
1-1/4 11-1/2 .686 .094 .719 .781 .420 1-31/64
1-1/2 11-1/2 .699 .094 .719 .781 .420 1-23/32
2 11-1/2 .667 .094 .719 .781 .436 2-3/16
2-1/2 8 .925 .094 .734 .781 .682 2-39/64
3 8 .925 .094 .734 .781 .766 3-15/64
3-1/2 8 .938 .125 .734 .781 .821 —
4 8 .950 .125 .734 .781 .844 —
*Distance from small end of tap projects through L1 taper thread ring gage.
**Recommended size given permits direct tapping without reaming the hole, but only gives a full thread for approximately the L1 length.
Reprinted with permission from United States Cutting Tool Institute (USCTI). Published by Kennametal Inc. © 2014. All rights reserved.
Standard
Projection Shortest
Projection
L1
Ring Gage
Basic
Size
Projection*
General-purpose pipe taps are appropriate for
threading a wide variety of materials, both ferrous
and non-ferrous.
Ground thread pipe taps are standard in
American Standard Pipe Form (NPT) and
American Standard Dryseal Pipe Form (NPFT).
NPT threads require the use of a sealer, like
Teon® tape or pipe compound. Dryseal taps are
used to tap ttings, which will give a pressure-
tight joint without the use of a sealer.
The nominal size of a pipe tap is that of the pipe
tting to be tapped, not the actual size of the
tap. The thread tapers 3/4" per foot.
All pipe taps are furnished with 2-1/2–3-1/2
thread chamfer.
Short projection pipe taps are made with a
projection shorter than standard for taper pipe
tapping where the depth of tapping is limited.
Special short projection taper pipe taps can
be furnished with American National Standard
Taper Pipe thread (ANPT) or Dryseal American
National Standard Taper Pipe thread (NPTF,
PTF-SAE Short, or PTF-SPL Extra Short).
For information on short projection pipe taps
and hole preparation for NPT, NPTF, and ANPT
internal pipe threads, consult WIDIA-GTD™
Technical Bulletins.
American National Standard Taper Pipe Thread Form (NPT)
Aeronautical National Taper Pipe Thread Form (ANPT)
Dryseal American National Standard Taper Pipe Thread Form (NPTF)
WID_Master16_Taps_Y092_Y093_Metric_REBRAND.indd 93 11/13/15 9:40 AM
Y94
LViWID M 16 T Y094 Y095 M i REBRAND O b 23 2015 9 57 AM
widia.com
Technical Information
DIN 371 • DIN 376 • Nominal Dimensions
DIN 371
machine screw
size number
nominal fraction
diameter (in) D L L3 L2 L5 S10
4 – 3,5 56 8 18 6 2,7
5 – 4,0 56 9 20 6 3,0
6 – 4,0 56 9 20 6 3,0
8 – 4,5 63 11 21 6 3,4
10 – 6,0 70 12 25 8 4,9
– 1/4 7,0 80 15 30 8 5,5
– 5/16 8,0 90 15 35 9 6,2
– 3/8 10,0 100 19 39 11 8,0
Technical Information
metric dimensions
nominal fraction
diameter (in) D L L3 L5 S10
7/16 8 100 18 9 6,2
1/2 9 110 23 10 7,0
9/16 11 110 25 12 9,0
5/8 12 110 24 12 9,0
3/4 16 140 30 15 12,0
7/8 18 140 34 17 14,5
1 18 160 38 17 14,5
metric dimensions
DIN 376
WID_Master16_Taps_Y094_Y095_Metric_REBRAND.indd 94 10/30/15 3:06 PM
Y95
LViWID M 16 T Y094 Y095 M i REBRANDO b 23 20159 57AM
widia.com
Technical Information
DIN 374 • Nominal Dimensions in mm
pitch
D1 minimum maximum D L L3* L5 S10
M8 0.2 0.75 6 80 18 8 4.9
M8 – 1 6 90 22 8 4.9
M9 0.2 0.75 7 80 18 8 5.5
M9 – 1 7 90 22 8 5.5
M10 0.2 1 7 90 20 8 5.5
M10 – 1.25 7 100 24 8 5.5
M11 0.35 1 8 90 20 9 6.2
M12 0.35 1.5 9 100 22 10 7
M14 0.35 1.5 11 100 22 12 9
M16 0.35 1.5 12 100 22 12 9
M16 – 2 12 110 32 12 9
M18 0.35 1.5 14 110 25 14 11
M18 – 2 14 125 34 14 11
M20 0.35 1.5 16 125 25 15 12
M20 – 2 16 140 34 15 12
M22 0.35 1.5 18 125 25 17 14.5
M22 – 2 18 140 34 17 14.5
M24 0.35 2 18 140 28 17 14.5
M27 0.35 2 20 140 28 19 16
M30 0.35 2 22 150 28 21 18
M30 – 3 22 180 45 21 18
DIN 374
* Maximum
Technical Information
metric dimensions
WID_Master16_Taps_Y094_Y095_Metric_REBRAND.indd 95 10/30/15 3:06 PM
Y96
LViWID M 16 T Y096 Y097 M i REBRAND O b 23 2015 9 57 AM
widia.com
Technical Information
D1 pitch D L L3L2L5S10
M3 0.5 4 46 11 19 6 3.2
M3.5 0.6 4 48 13 20 6 3.2
M4 0.7 5 52 13 21 7 4
M4.5 0.75 5 55 13 21 7 4
M5 0.8 5.5 60 16 24 7 4.5
M6 1 6 62 19 29 7 4.5
JIS • Nominal Dimensions
JIS Type 2 Metric Coarse
Technical Information
metric dimensions
D1 pitch D L L3 L5 S10
M8 1.25 6.2 70 22 8 5
M9 1.25 7 72 22 8 5.5
M10 1.5 7 75 24 8 5.5
M11 1.5 8 80 25 9 6
M12 1.75 8.5 82 29 9 6.5
M14 2 10.5 88 30 11 8
M16 2 12.5 95 32 13 10
M18 2.5 14 100 37 14 11
M20 2.5 15 105 37 15 12
M22 2.5 17 115 38 16 13
M24 3 19 120 45 18 15
JIS Type 3 Metric Coarse
metric dimensions
WID_Master16_Taps_Y096_Y097_Metric_REBRAND.indd 96 10/30/15 3:06 PM
Y97
LViWID M 16 T Y096 Y097 M i REBRANDO b 23 20159 57AM
widia.com
Technical Information
Tap Styles • Methods of Chip Handling
Through Holes
Push Chips
Blind Holes
Pull Chips
• GUN™ (spiral point) or
LHSF (Left-Hand
Spiral Flute).
• Ideal for materials
with long chips.
• RHSF (Right-Hand
Spiral Flute).
• Ideal for materials
with long chips.
GUN
™
LHSF RHSF
Blind or Through Holes
Store Chips
Blind or Through Holes
No Chips
STFL Forming Tap
• STFL (Straight Flute).
• Ideal for materials
with short chips.
• Forming.
• Ideal for ductile
materials <32 HRC.
Technical Information
WID_Master16_Taps_Y096_Y097_Metric_REBRAND.indd 97 10/30/15 3:06 PM
Y98
LViWID M 16 T Y098 Y099 M i REBRAND O b 23 2015 9 57 AM
widia.com
In addition to the nominal size and pitch of a tap, there is another
important dimensional factor to be considered when selecting a
ground thread tap for a given job. This factor is the pitch diameter
tap limit, “H” and “L”. “H” represents (high) above basic pitch
diameter; “L” (low) is below basic pitch diameter. Tap limits have
been established to provide a choice in the selection of the tap size
best suited to produce the class of thread desired.
Figure 1 Illustrates the numbering system and the .0005" diameter
increment separation between successive limits. Because
the starting point is basic pitch diameter, dividing the limit
number by two establishes, in thousandths of an inch, the
amount the maximum tap pitch diameter is above basic
in the “H” series and the amount the minimum tap pitch
diameter is under basic in the “L” series.
Figure 2 Illustrates the positioning of the tap limits in relation to the
various classes of threads for a 1/4–20 size.
Technical Information
Ground Thread Tap Limits
.0050
.0045
.0040
.0035
.0030
.0025
.0020
.0015
.0010
.0005
.0005
.0050
.0045
.0040
.0035
.0030
.0025
.0020
.0015
.0010
.0005
L1
H1
H2
H3
H4
H5
H6
H7
H8
H9
H10
H6
H5
H4
This chart shows the
method of designating limits
and does not indicate
available taps in any
particular size.
For taps through 1" inclusive, 8 TPI and ner
For sizes from 1–1-1/2"
inclusive, 6 TPI and ner
basic
Figure 1
basic
P.D. P.D.
L1
.2255
.2245
.2235
.2205
.2195
.2185
.2175
.2165
.2215
.2225
.2255
.2245
.2235
.2205
.2195
.2185
.2175
.2165
.2215
.2225
H1
H2
H3
H5
TOL.0005
TOL.0005
TOL.0005
TOL.0005
TOL.0005
TOL
.0073
1B
2B
23B 3
TOL
.0049
TOL
.0036
TOL
.0036
TOL
.0026
.2248
.2248
.2211 .2211
.2201
tapping hole limits
tap limits
Class of Thread – 1/4–20 UNC and NC
basic
Figure 2
P.D.
Technical Information
WID_Master16_Taps_Y098_Y099_Metric_REBRAND.indd 98 10/30/15 3:06 PM
Y99
LViWID M 16 T Y098 Y099 M i REBRANDO b 23 20159 57AM
widia.com
Internal Unified Thread
4H
3B
2B
1B
ISO 1
6H
6G
ISO 2
ISO 3
7G
nominal pitch diameter (basis)
nominal pitch diameter (basis)
Technical Information
Tolerances Over Basic Pitch Diameter
Internal Metric Thread
For the tap user’s convenience, new
generation WIDIA-GTD™ taps are sized
for the intended class of t of the internal
screw thread. ISO standard 2857 species
the manufacturing tolerances of the tap
pitch diameters for ISO metric threads of
tolerances classes 4H to 8H and 4G to 6G.
Examples:
4H tap corresponds to ISO 1
6H tap corresponds to ISO 2
6G tap corresponds to ISO 3
Similarly, ASME B1.1 recommends tap pitch
diameter tolerances for 1B, 2B, and 3B
classes of t.
However, it is recognised in many
tapping applications that taps should
have a pitch diameter that is larger than
industry standards. These applications
include tapping abrasive materials or
CNC applications where machine and
tool concentricity is excellent. Taps
manufactured to WIDIA™ standards are
designated with an X after the class of
t (example 6HX or 3BX). These graphs
illustrate the differences.
Technical Information
WID_Master16_Taps_Y098_Y099_Metric_REBRAND.indd 99 10/30/15 3:06 PM
Y100
LViWID M 16 T Y100 Y101 M i REBRAND O b 23 2015 9 57 AM
widia.com
It is generally recognised that, in mass production, it is impossible
to reproduce in exact detail the theoretically perfect product
as laid out on the drawing board. The allowed slight variation between
the theoretically perfect product drawing and each unit of the actual
product is called the tolerance.
Allowance
An intentional difference in correlated dimensions of mating parts.
It is the minimum clearance or maximum interference between
such parts.
Angle of Thread
The angle included between the anks of the thread measured
in an axial plane.
Half Angle of Thread
The angle included between a ank of the thread and the
normal (90°) to the axis, measured in an axial plane.
Lead of Thread
The distance a screw thread advances axially in one turn. On a
single-thread screw, the lead and pitch are identical. On a double
thread, the lead is 2x pitch; on a triple thread, the lead is 3x pitch, etc.
Major Diameter
Technical Information
Defi nition of Screw Thread Tolerances
The largest diameter of a straight-screw thread.
Minor Diameter
The smallest diameter of a straight-screw thread.
Pitch
The distance from a point on a screw thread to a corresponding point on
the next thread measured parallel to the axis.
The pitch in inches = 1
number of threads per inch
Pitch Diameter
On a straight-screw thread, the diameter
of an imaginary cylinder that would pass
through the threads at such points as to
make equal the width of the threads and
the width of the spaces cut by the surface
of the cylinder.
nut
lead angle
pitch
A-thread
angle (whole)
screw
major diameter
pitch diameter
minor diameter
A
_
_
a – half angle
diameter of
imaginary cylinder
pitch
width of
thread
width of
space
=
P.D.
Technical Information
WID_Master16_Taps_Y100_Y101_Metric_REBRAND.indd 100 10/30/15 3:06 PM
Y101
LViWID M 16 T Y100 Y101 M i REBRANDO b 23 20159 57AM
widia.com
Technical Information
Inch Screw Thread with UNJ Profi le
UNx:
R0.14434P-0.125P
A thread system is available for aerospace and other applications where high fatigue strength is
required. The UNJ thread form is de ned by ASME B1.15 and is similar to Military Speci cation
MIL-S-8879. Screw thread assemblies consist of external and internal threads. In order to
minimise the stress on the external UNJ thread, a controlled root radius is required that
is equal to 0.15011P to 0.18042P, where P is the thread pitch. Internal UNJ threads are
not required to have a radius at either the major or minor diameters.
Because external UNJ threads must be produced with a de ned
root radius, standard UN tooling may not be used. However, internal
UNF threads may be produced with ground thread UN taps sized to
produce the proper class of t. The tap does not need to be marked
with a letter J. Attention must be paid to the tap drill since the minor
diameter has to be speci ed so as to provide clearance with the root
radius on the external thread.
For UNJ thread speci cations, the reader is referred to ASME B1.15.
Please note this standard includes Class 3 and Class 2 UNJ screw
threads. However, only Class 3 UNJ threads meet the requirements
of Military Speci cation MIL-S-8879. For Uni ed Inch (UN) thread
speci cations, refer to ASME B1.1.
Nut:
UNx/UNJx
Screw:
UNx
UNJx
Technical Information
WID_Master16_Taps_Y100_Y101_Metric_REBRAND.indd 101 10/30/15 3:06 PM
Y102
LViWID M 16 T Y102 Y103 M i REBRAND O b 23 2015 9 57 AM
widia.com
Unlike cutting taps, which remove material, forming taps generate an internal screw thread
by displacing material and forming it into the V-shaped thread. A common misconception
is that a thread rolling action occurs. Instead, the threads are formed over the tapered
entry section of the tap as the tap rotates into the hole. A succession of deeper
penetrating lobes over the entry plastically displaces material radially between the tap’s
thread anks until the entry length is reached. At this point, the thread is fully formed at
the correct thread height.
Forming taps have numerous advantages over cutting taps. The
most obvious advantage is that forming taps do not create chips.
There are no chip removal problems. Bird nesting is a situation
that occurs when chips wrap around the shank of spiral- uted taps
when tapping blind holes in long chipping materials. Forming taps
help this to be avoided. Since forming taps avoid this problem,
they are stronger and more resistant to breakage. Another
misconception is that forming taps produce stronger threads.
Although the forming process strain hardens the thread anks,
it has very little effect on the major diameter, the location where
internal threads strip.
Forming taps can only be used in ductile materials. Due to
increased friction relative to cutting, forming taps require higher
torque than cutting taps. In some situations, oil-based lubrications
are required, and this might not be convenient on CNC machining
centres that use water soluble coolant. In this situation, the
lubricant concentration should be increased.
Since forming taps displace material, larger diameter pre-tap holes
are required. This is especially important when converting from
cutting taps to forming taps. If a cutting tap hole size is used, the
displaced material will over- ll the tap’s threads and breakage will
result. Please consult hole size charts for forming taps.
Developed
Crest Thread
Root Tapered End
Technical Information
Forming Taps
Technical Information
WID_Master16_Taps_Y102_Y103_Metric_REBRAND.indd 102 10/30/15 3:06 PM
Y103
LViWID M 16 T Y102 Y103 M i REBRANDO b 23 20159 57AM
widia.com
coating properties and application precautions
Titanium Nitride
(TiN)
Proprietary TiN coating (hardness 2300 Vickers) offers
signi cantly improved wear life and thread nish, often at higher
tapping speeds, in a broad range of materials, especially steels,
irons, and plastics.
Golden colour.
Use with caution in non-ferrous materials such as
aluminium because of tendency to gall.
Titanium Carbonitride
(TiCN)
Proprietary TiCN coating (hardness 3000 Vickers) is harder,
tougher, and more wear resistant than TiN under conditions of
moderate cutting temperatures. Like TiN, TiCN may be used at
higher cutting speeds in a broad range of materials, especially
steels and irons.
Blue-grey colour.
Use with caution in non-ferrous materials such as
aluminium because of tendency to gall. TiAlN is a better
choice when used at extreme temperatures.
Titanium Nitride +
Chromium Carbide
Carbon
(TiN + CrC/C)
Proprietary coating (hardness 2300 Vickers) that combines the
wear resistance of smooth TiN coating with a lubricous top layer
of chromium carbide carbon. Effective in stainless steel and non-
ferrous materials including aluminium and titanium. Ideal choice
for 300 series stainless steels, wrought, and die cast aluminiums.
Black/grey colour.
Effective in both ferrous and non-ferrous materials.
Titanium Aluminium
Nitride
(TiAlN)
Nanolayer TiAlN coating (hardness 3300 Vickers) offers improved
wear life and thread nish, especially in conditions where high
temperatures can be generated. Use for PH stainless steels and
nickel-based alloys like INCONEL
®
.
Violet/grey colour.
Use with caution in non-ferrous materials because of
tendency to gall.
Chromium Nitride
(CrN)
CrN is medium hard (hardness 1800 Vickers) and has a lower
wear resistance than TiN, TiCN, and TiAlN. However, unlike these
coatings, CrN does not gall when used in some non-ferrous work
materials. Use for brass, bronze, zinc alloys, and magnesium
alloys.
Silver colour.
Ineffective in ferrous materials.
Nitride
(MAXI #1)
Hardened case extends wear life in abrasive materials. Use for
aluminium and other non-ferrous materials.
Avoid on taper pipe, fast spiral, and small diameter
(<#6) or ne pitch taps due to tendency for
thread chipping.
Oxide
(SH-50)
Helps prevent galling in ferrous (iron-based) materials. For free
machining steel. Use for steels, stainless steels, and irons.
Has a tendency to cause galling in non-ferrous
materials such as aluminium.
Nitride and Oxide
(SH-47)
Combines the bene ts of nitride and oxide surface treatments.
For steels, stainless steels, and nickel alloys.
See precautions for nitride and oxide surface
treatments.
Technical Information
Tapping Guide
Technical Information
WID_Master16_Taps_Y102_Y103_Metric_REBRAND.indd 103 10/30/15 3:06 PM
Y104
LViWID M 16 T Y104 Y105 M i REBRAND N b 10 2015 2 14 PM
widia.com
Inch Sizes
RPM Formulas
Metric Sizes
Factors when trying to determine the best tapping speeds:
• Material to be tapped
• Length of chamfer on tap
• Percentage of full thread to be cut
• Length of hole (depth of thread)
• Pitch of thread
• Cutting uids
• Machine equipment
• Horizontal or vertical tapping
The best and most ef cient operating speeds for taps cannot be
calculated with the same certainty, as for many other metalcutting
tools.
With other tools, the feed per revolution can be set at any desired
point and can be varied as conditions demand. Taps, on the other
hand, must always be advanced at a rate equal to one pitch for
every revolution. The style of tap may vary the conditions.
For example, with a bottoming tap, the rst thread on each land
cuts the full height of thread, while, with a taper or starting tap, a
number of threads do their share of the cutting before the full height
of thread is reached.
The depth of thread also varies, depending on the pitch. The
coarser the thread, the greater the advance of the tap per revolution
and the greater the amount of material removed.
Speeds may be modifi ed to take into account any or all of
these factors:
• Speeds must be lowered as length of thread increases
because, in deep thread holes, the accumulated chips
increase friction and interfere with lubrication.
• Bottoming taps must be run slower than plug taps.
• Tapping full height of thread calls for slower speed than if
the commercial 75% height only is required.
• Coarse-thread taps in the larger diameters should be run
more slowly than ne-thread taps of the same diameters.
• The quantity and quality of cutting uid may affect the
permissible speeds as much as 100%.
• Taper threaded taps, such as pipe taps, should be
operated from 1/2–3/4 the speed of a straight thread tap
of comparable major diameter.
SFM = Surface Feet per Minute
RPM = Revolutions per Minute
IPM = Inches per Minute
TPI = Threads per Inch
SFM = RPM x tool diameter or 0.26 x RPM x tool diameter
3.82
RPM = 3.82 x SFM
tool diameter
IPM = RPM or *P x RPM
TPI*
S m/m = / x tool diameter x RPM
1000
RPM = mm/m x 1000
/ x tool diameter
mm/min = mm P x RPM
Technical Information
Tapping Speeds
The method of feeding the tap, and the type of equipment
for driving, also in uences the permissible speeds. If taps are
mechanically fed at the proper rate of advance, they can be
operated at higher speeds than if they are required to feed
themselves and pull some part of the machine along with them.
S m/m = Surface Metres per Minute
/ = 3.1416
mm/min = millimetres per minute
P = Pitch (1/number of threads per inch)
Technical Information
WID_Master16_Taps_Y104_Y105_Metric_REBRAND.indd 104 11/10/15 2:22 PM
Y105
LViWID M 16 T Y104 Y105 M i REBRANDN b 10 20152 14PM
widia.com
UNC/UNF and NPT/NPTF
Metric
metric taps
surface feet per minute (SFM)
5' 10' 15' 20' 25' 30' 40' 50' 60' 70' 80' 90' 10' 110' 120' 130' 140' 150'
revolutions per minute (RPM)
M1 490 979 1469 1959 2449 2938 3918 4897 5877 6856 7836 8815 9795 10774 11754 12733 13713 14692
M2 242 484 725 967 1209 1451 1934 2418 2901 3385 3868 4352 4835 5319 5803 6286 6770 7253
M3 162 324 486 347 809 971 1295 1619 1942 2266 2590 2914 3237 3561 3885 4208 4532 4856
M3.5 138 277 415 554 692 830 1107 1384 1661 1938 2214 1491 2768 3045 3322 3599 3875 4152
M4 122 243 365 487 608 730 973 1217 1460 1703 1946 2190 2433 2676 2920 3163 3406 3650
M5 97 194 291 388 485 582 776 970 1163 1357 1551 1745 1939 2133 2327 2521 2715 2905
M6 81 162 243 324 405 486 647 809 971 1133 1295 1457 1619 1781 1942 2104 2266 2428
M7 69 138 208 277 346 415 554 692 830 969 1107 1246 1384 1522 1661 1799 1938 2076
M8 61 121 182 243 303 364 485 606 728 849 970 1091 1213 1334 1455 1577 1698 1819
M10 48 97 145 194 242 291 388 485 582 679 776 873 970 1067 1163 1260 1357 1454
M12 40 81 121 162 202 243 324 405 486 567 647 728 809 890 971 1052 1133 1214
M14 35 69 104 139 173 208 277 347 416 485 555 624 693 763 832 901 971 1040
M16 30 61 91 121 152 182 243 303 364 424 485 546 606 667 728 788 849 910
M18 27 54 81 108 135 162 216 269 323 377 431 485 539 593 647 700 754 808
M20 24 49 73 97 121 146 194 243 291 340 388 437 485 534 582 631 680 728
M22 22 44 66 88 110 132 176 221 265 309 353 397 441 485 529 573 618 662
M24 20 40 61 81 101 121 162 202 243 283 323 364 404 445 485 526 566 606
M27 18 36 54 72 90 108 144 180 216 252 287 323 359 395 431 467 503 539
M30 16 32 49 65 81 97 129 162 194 226 259 291 323 356 388 420 453 485
tap size taper pipe taps
surface feet per minute (SFM)
5' 10' 15' 20' 25' 30' 40' 50' 60' 70' 80' 90' 100' 110' 120' 130' 140' 150'
revolutions per minute (RPM)
0—
318 637 955 1273 1592 1910 2546 3183 3820 4456 5093 5729 6366 7003 7639 8276 8913 9549
1—
273 546 819 1046 1308 1570 2093 2617 3140 3663 4186 4710 5233 5756 6279 6805 7326 1849
2—
212 424 637 888 1110 1333 1777 2221 2665 3109 3554 3999 4442 4886 5330 5774 6218 6662
3—
191 382 573 772 964 1157 1543 1929 2315 2701 3086 3472 3858 4244 4629 5015 5401 5787
4—
174 347 521 682 853 1023 1364 1705 2046 2387 2728 3069 3411 3751 4092 4434 4775 5115
5—
147 294 441 611 764 917 1222 1528 1833 2139 2445 2750 3056 3361 3667 3973 4278 4584
6—
136 273 409 553 691 829 1106 1382 1859 1935 2212 2488 2766 3042 3318 3595 3871 4148
8—
119 239 358 466 583 699 932 1165 1398 1631 1864 2097 2330 2563 2796 3029 3262 3495
10 — 101 201 302 402 502 603 804 1005 1205 1406 1607 1808 2009 2210 2411 2612 2813 3014
12 — 87 174 260 354 442 531 707 884 1061 1238 1415 1592 1769 1945 2122 2300 2476 2653
1/4 — 76 153 229 306 382 458 611 764 917 1070 1222 1375 1528 1681 1833 1986 2139 2292
5/16 — 62 123 185 245 306 367 489 611 733 856 978 1100 1222 1345 1467 1589 1711 1833
3/8 — 50 101 151 204 255 305 407 509 611 713 815 917 1019 1120 1222 1324 1426 1528
7/16 1/8 43 87 130 175 219 262 349 437 524 611 698 786 873 960 1048 1135 1222 1310
1/2 — 38 76 115 153 191 229 305 382 458 535 611 688 764 840 917 993 1070 1146
9/16 1/4 34 68 102 137 172 206 274 342 410 478 547 616 683 752 820 888 952 1020
5/8 — 32 64 96 122 153 183 244 306 367 428 489 550 611 672 733 794 856 917
11/16 3/8 28 55 83 111 138 167 222 278 333 389 444 500 556 611 667 722 778 833
3/4 — 25 51 76 102 128 153 203 255 305 357 407 458 509 560 611 662 713 764
7/8 1/2 22 43 65 87 109 131 175 218 262 306 350 392 437 480 524 568 611 655
1—
19 38 57 76 96 115 153 191 230 268 305 344 382 420 458 497 535 573
1-1/8 3/4 17 34 51 68 84 102 136 170 204 238 272 306 340 373 407 441 475 509
1-1/4 — 15 31 46 61 76 92 122 153 183 214 244 275 305 336 367 397 428 458
1-3/8 1 14 28 42 56 69 83 111 139 167 194 222 250 278 306 333 361 389 417
1-1/2 — 13 25 38 51 63 76 102 127 153 178 204 229 255 280 305 331 356 382
1-5/8 — 12 23 35 47 59 71 94 118 141 165 188 212 235 259 282 306 329 353
1-3/4 — 11 22 33 44 55 65 87 109 131 153 175 196 218 240 262 284 306 327
1-7/8 — 10 20 30 41 51 61 81 102 122 143 163 183 204 224 244 265 285 306
2—
9 19 29 38 48 57 76 96 115 134 153 172 191 210 229 248 267 287
Technical Information
General Purpose Table of Speeds
Technical Information
WID_Master16_Taps_Y104_Y105_Metric_REBRAND.indd 105 11/10/15 2:22 PM
Y106
LViWID M 16 T Y106 Y107 M i REBRAND O b 23 2015 9 58 AM
widia.com
application symptom common cause remedy
general
gage out of limits tap size and gage mismatch select tap size for gage
oversize thread alignment, spindle feed correct
oversize at top runout or alignment correct
go gage binds part way worn tool, tap cuts off lead replace tap, synchronous holder
thread shaving feed error, high axial force programme, synchronous holder
chipping high cutting force, worn tap tap geometry, replace tap
breakage chip jamming utes tap geometry, tapping depth
— worn tool, high torque replace tap with new tool
short life, low speed excessive wear SC or HSS-E-PM HP taps
steel
birdnest blind hole long, ductile chips GT30 GP6505 (oxide), peck feed
chipping high material hardness GT00, GT02 WP31MG (TiN)
breakage in blind holes hole depth >2D, chip jamming GT04 WH36MG (TiN/MoS2)
stainless steel
oversize thread, low life galling GT20, GT30 GM6515 (TiN-CrC/C)
short life work hardened core hole replace drill
cast iron excessive wear abrasion GT40 GP6520 (TiCN)
aluminium, cast excessive wear high silicon GT40 GP6520 (TiCN)
aluminium, wrought oversize thread galling GT70, GT80 WN48EG (DLC)
nickel, cobalt alloys short life high cutting temperature GT10, GT12 WS32MG (TiCN)
titanium short life high cutting temperature GT14, GT16 WN35MG (TiN-DLC)
Partial List of Solutions to Tapping Problems
Technical Information
Troubleshooting
Technical Information
WID_Master16_Taps_Y106_Y107_Metric_REBRAND.indd 106 10/30/15 3:06 PM
Y107
LViWID M 16 T Y106 Y107 M i REBRANDO b 23 20159 58AM
widia.com
vibration marks major crest wear edge chipping cone-shaped thread entry marks
cutting speed check reduce — — —
feed per tooth check increase reduce — —
workpiece clamping improve improve improve — improve
machine tool stability improve improve improve — improve
cantilever arm shorten shorten — — shorten
helix angle increase reduce — — —
radial runout check check — — —
coating — improve improve — —
milling operation — climb mill climb mill climb mill —
line feed/entry ramp check check — — improve
coolant pressure —check
(>20 bar, 290 psi) check
(>20 bar, 290 psi) ——
Thread Mills
Technical Information
Troubleshooting
Technical Information
WID_Master16_Taps_Y106_Y107_Metric_REBRAND.indd 107 10/30/15 3:06 PM
Y108
LViWID M 16 T Y108 Y109 M i REBRAND O b 23 2015 9 58 AM
widia.com
Technical Information
Decimal Equivalents
Metric Fractional Wire gage Letter size
drill
size
decimal
(in)
drill
size
decimal
(in)
drill
size
decimal
(in)
drill
size
decimal
(in)
drill
size
decimal
(in)
drill
size
decimal
(in)
0,30mm .0118 54 .0550 3,10mm .1220 5,50mm .2165 8,50mm .3346 9/16 .5625
0,32mm .0126 1,40mm .0551 1/18 .1250 7/32 .2188 8,60mm .3386 14,50mm .5709
80 .0135 1,45mm .0571 3,20mm .1260 5,60mm .2205 R.3390 37/64 .5781
0,35mm .0138 1,50mm .0591 30 .1285 2.2210 8,70mm .3425 14,75mm .5807
79 .0145 53 .0595 3,30mm .1299 5,70mm .2244 11/32 .3438 15,00mm .5906
0,38mm .0150 1,55mm .0610 3,40mm .1339 1.2280 8,80mm .3465 19/32 .5938
1/64 .0156 1/16 .0625 29 .1360 5,80mm .2283 S.3480 15,25mm .6004
0,40mm .0157 1,60mm .0630 3,50mm .1378 5,90mm .2323 8,90mm .3504 39/64 .6094
78 .0160 52 .0635 28 .1405 A.2340 9,00mm .3543 15,50mm .6102
0,42mm .0165 1,65mm .0650 9/64 .1406 15/64 .2344 T.3580 15,75mm .6201
0,45mm .0177 1,70mm .0669 3,60mm .1417 6,00mm .2362 9,10mm .3583 5/8 .6250
77 .0180 51 .0670 27 .1440 B.2380 23/64 .3594 16,00mm .6299
0,48mm .0189 1,75mm .0689 3,70mm .1457 6,10mm .2402 9,20mm .3622 16,25mm .6398
0,50mm .0197 50 .0700 26 .1470 C.2420 9,30mm .3661 41/64 .6406
76 .0200 1,80mm .0709 25 .1495 6,20mm .2441 U.3680 16,50mm .6496
75 .0210 1,85mm .0728 3,80mm .1496 D.2460 9,40mm .3701 21/32 .6562
0,55mm .0217 49 .0730 24 .1520 6,30mm .2480 9,50mm .3740 16,75mm .6594
74 .0225 1,90mm .0748 3,90mm .1535 1/4, E.2500 3/8 .3750 17,00mm .6693
0,60mm .0236 48 .0760 23 .1540 6,40mm .2520 V.3770 43/64 .6719
73 .0240 1,95mm .0768 5/32 .1562 6,50mm .2559 9,60mm .3780 17,25mm .6791
0,62mm .0244 5/64 .0781 22 .1570 F.2570 9,70mm .3819 11/16 .6875
72 .0250 47 .0785 4,00mm .1575 6,60mm .2598 9,80mm .3858 17,50mm .6890
0,65mm .0256 2,00mm .0787 21 .1590 G.2610 W.3860 45/64 .7031
71 .0260 2,05mm .0807 20 .1610 6,70mm .2638 9,90mm .3898 18,00mm .7087
0,70mm .0276 46 .0810 4,10mm .1614 17/64 .2656 25/64 .3906 23/32 .7188
70 .0280 45 .0820 4,20mm .1654 H.2660 10,00mm .3937 18,50mm .7283
69 .0292 2,10mm .0827 19 .1660 6,80mm .2677 X.3970 47/64 .7344
0,75mm .0295 2,15mm .0846 4,30mm .1693 6,90mm .2717 10,20mm .4016 19,00mm .7480
68 .0310 44 .0860 18 .1695 I.2720 Y.4040 3/4 .7500
1/32 .0312 2,20mm .0866 11/64 .1719 7,00mm .2756 13/32 .4062 49/64 .7656
0,80mm .0315 2,25mm .0886 17 .1730 J.2770 Z.4130 19,50mm .7677
67 .0320 43 .0890 4,40mm .1732 7,10mm .2795 10,50mm .4134 25/32 .7812
66 .0330 2,30mm .0906 16 .1770 K.2810 27/64 .4219 20,00mm .7874
0,85mm .0335 2,35mm .0925 4,50mm .1772 9/32 .2812 10,80mm .4252 51/64 .7969
65 .0350 42 .0935 15 .1800 7,20mm .2835 11,00mm .4331 20,50mm .8071
0,90mm .0354 3/32 .0938 4,60mm .1811 7,30mm .2874 7/16 .4375 13/16 .8125
64 .0360 2,40mm .0945 14 .1820 L.2900 11,20mm .4409 21,00mm .8268
63 .0370 41 .0960 4,70mm, 13 .1850 7,40mm .2913 11,50mm .4528 53/64 .8281
0,95mm .0374 2,45mm .0965 3/16 .1875 M.2950 29/64 .4531 27/32 .8438
62 .0380 40 .0980 4,80mm, 12 .1890 7,50mm .2953 11,80mm .4646 21,50mm .8465
61 .0390 2,50mm .0984 11 .1910 19/64 .2969 15/32 .4688 55/64 .8594
1,00mm .0394 39 .0995 4,90mm .1929 7,60mm .2992 12,00mm .4724 22,00mm .8661
60 .0400 38 .1015 10 .1935 N.3020 12,20mm .4803 7/8 .8750
59 .0410 2,60mm .1024 9.1960 7,70mm .3031 31/64 .4844 22,50mm .8858
1,05mm .0413 37 .1040 5,00mm .1969 7,80mm .3071 12,50mm .4921 57/64 .8906
58 .0420 2,70mm .1063 8.1990 7,90mm .3110 1/2 .5000 23,00mm .9055
57 .0430 36 .1065 5,10mm .2008 5/16 .3125 12,80mm .5039 29/32 .9062
1,10mm .0433 7/64 .1094 7.2010 8,00mm .3150 13,00mm .5118 59/64 .9219
1,15mm .0453 35 .1100 13/64 .2031 O.3160 33/64 .5156 23,50mm .9252
56 .0465 2,80mm .1102 6.2040 8,10mm .3189 13,20mm .5197 15/16 .9375
3/64 .0469 34 .1110 5,20mm .2047 8,20mm .3228 17/32 .5312 24,00mm .9449
1,20mm .0472 33 .1130 5.2055 P.3230 13,50mm .5315 61/64 .9531
1,25mm .0492 2,90mm .1142 5,30mm .2087 8,30mm .3268 13,80mm .5433 24,50mm .9646
1,30mm .0512 32 .1160 4.2090 21/64 .3281 35/64 .5469 31/32 .9688
55 .0520 3,00mm .1181 5,40mm .2126 8,40mm .3307 14,00mm .5512 25,00mm .9843
1,35mm .0531 31 .1200 3.2130 Q.3320 14,25mm .5610 63/64 .9844
1" 1.0000
Technical Information
WID_Master16_Taps_Y108_Y109_Metric_REBRAND.indd 108 10/30/15 3:06 PM
Y109
LViWID M 16 T Y108 Y109 M i REBRANDO b 23 20159 58AM
widia.com
Knowing the hardness of the work material to be tapped is essential
in selecting the best tap for the job.
Technical Information
Hardness Conversion Table
Technical Information
10 mm/min
ball
3000 kg
120°
cone
150 kg
1/16"
ball
100 kg model C
1000 lb
per
sq. in.
10 mm/min
ball
3000 kg
120°
cone
150 kg
1/16"
ball
100 kg model C
1000 lb
per
sq. in.
Brinell Rockwell C Rockwell B
Shore
Scleroscope
tensile
strength Brinell Rockwell C Rockwell B
Shore
Scleroscope
tensile
strength
800 72 – 100 – 276 30 105 42 136
780 71 – 99 – 269 29 104 41 132
760 70 – 98 – 261 28 103 40 129
745 68 – 97 367 258 27 102 39 127
725 67 – 96 357 255 26 102 39 125
712 66 – 95 350 249 25 101 38 123
682 65 – 93 337 245 24 100 37 119
668 64 – 91 326 240 23 99 36 117
652 63 – 89 318 237 23 99 35 115
626 62 – 87 306 229 22 98 34 113
614 61 – 85 299 224 21 97 33 110
601 60 – 83 292 217 20 96 33 107
590 59 – 81 290 211 19 95 32 104
576 57 – 79 281 206 18 94 32 102
552 56 – 76 270 203 17 94 31 100
545 55 – 75 268 200 16 93 31 98
529 54 – 74 259 196 15 92 30 96
514 53 120 72 254 191 14 92 30 94
502 52 119 70 247 187 13 91 29 92
495 51 119 69 244 185 12 91 29 91
477 49 118 67 233 183 11 90 28 90
461 48 117 66 227 180 10 89 28 89
451 47 117 65 223 175 9 88 27 86
444 46 116 64 219 170 7 87 27 84
427 46 115 62 209 167 6 87 27 82
415 44 115 60 204 165 5 86 26 81
401 43 114 58 196 163 4 85 26 80
388 42 114 57 191 160 3 84 25 78
375 41 113 55 184 156 2 83 25 76
370 40 112 54 182 154 1 82 25 75
362 39 111 53 179 152 – 82 24 74
351 38 111 51 173 150 – 81 24 74
346 37 110 50 170 147 – 80 24 72
341 37 110 49 168 145 – 79 23 71
331 36 109 47 163 143 – 79 23 70
323 35 109 46 158 141 – 78 23 69
311 34 108 46 153 140 – 77 22 69
301 33 107 45 148 135 – 75 22 67
293 32 106 44 144 130 – 72 22 65
285 31 105 43 140 – – – – –
WID_Master16_Taps_Y108_Y109_Metric_REBRAND.indd 109 10/30/15 3:06 PM
Y110
LViWID M 16 T Y110 Y111 M i REBRAND O b 23 2015 9 58 AM
widia.com
Technical Information
Material Technical Information
material
number DIN EN - D AFNOR - F BS - UK JIS
0.6010 GG10 — Grade 100 FC 100
0.6015 GG15 FGL 150 Grade 150 FC 150
0.6020 GG20 FGL 200 Grade 220 FC 200
0.6025 GG25 FGL 250 Grade 250, 260 FC 250
0.6030 GG30 FGL 300 Grade 300 FC 300
0.6035 GG35 FGL 350 Grade 350 FC 350
0.6655 — L-NUC 15 6 2 F1 —
0.6656 — L-NUC 15 6 3 F1 —
0.6660 — L-NC 20 2 F2 —
0.6661 — L-NC 20 3 F2 —
0.6676 — L-NC 30 3 F3 —
0.7040 GGG40 FGS 400-15 Grade 420/12 FCD 400
0.7043 GGG40.3 FGS 370-17 Grade 370/12 FCD 370
0.7050 GGG50 FGS 500-7 Grade 500/7 FCD 500
0.7060 GGG60 FGS 600-3 Grade 600/3 FCD 600
0.7070 GGG70 FGS 700-2 Grade 700/2 FCD 700
0.7080 GGG80 FGS 800-2 Grade 800/2 FCD 800
0.7652 — S-NM 13 7 S 6 —
0.7660 — S-NC 20 2 S 2 —
0.7661 — S-NC 20 3 S 2 —
0.7670 — S-N 22 S 2 C —
0.7673 — S-NM 23 4 S 2 M —
0.7676 — S-NC 30 3 S 3 —
0.7677 — S-NC 30 1 S 3 —
0.8035 GTW35 MB 35-7 W 35-04 FCMW 330
0.8038 — MB 380-12 — —
0.8040 GTW40 MB 400-5 W 40-05 FCMW 370
0.8045 GTW45 MB 450-7 W 45-07 FCMWP 440
0.8135 GTS35 MN 350-10 B 35-12 FCMB 340
0.8145 GTS45 MP 50-5 P 45-06 —
0.8155 GTS55 MP 60-3 P 55-04 —
0.8165 GTS65 — P 65-02 FCMP 540
0.8170 GTS70 MP 70-2 P 70-02 FCMP 690
0.9620 X 260 NiCr 4-2 — Grade 2 A —
0.9625 X 330 NiCr 4-2 — Grade 2 B —
0.9630 300 CrNiSi 9-5-2 — Grade 2 C, D, E —
0.9635 300 CrMo 15-3 — Grade 3 A, B —
0.9640 300 CrMoNi 15-2-1 — Grade 3 A, B —
0.9645 260 CrMoNi 20-2-1 — Grade 3 C —
0.9650 G-X 260 Cr 27 — Grade 3 D —
0.9655 300 CrMo 27-1 — Grade 3 E —
1.0301 C 10 XC 10 045 M 10040 A 10 S 10 C
1.0401 C 15 XC 12, XC 18 080 M 15 S 15 C
1.0402 C 22 C 22, XC 18, XC 25 1 C 22, 070 M 20 S 20 C, S 2 C
1.0406 C 25 1 C 25 070 M 26 S 25 C
1.0501 C 35 XC 38, 1 C 35 080 M 36, 1 C 35 S 35 C
1.0503 C 45 1 C 45, XC 48 H 1 1 C 45, 080 M 46 S 45 C
1.0511 C 40 1 C 40, XC 42 H 1 080 M 40, 1 C 40 S 40 C
1.0528 C 30 — 1 C 30, XC 32 S 30 C
1.0535 C 55 1 C 55, XC 55 H 1 1 C 55, 070 M 55 S 55 C
1.0540 C 50 1 C 50 1 C 50, 080 M50 S 50 C
1.0570 S355J2G3 E 36-3, E 36-4 Fe 510 D1 FF, 50/35 SM 490 _, SM 520 B
1.0601 C 60 1 C 60, AF 70 C 55 1 C 60, 080 A 67 S 58 C
1.0715 9 SMn 28 S 250 080 M 15, 230 M 07 SUM 22
1.0718 9 SMnPb 28 S 250 Pb — SUM 22 L, SUM 23 L
1.0721 10 S 20 13 MF 4, 10 F 1 210 M 15 —
1.0722 10 SPb 20 CC 10 Pb, 10 PbF 2 — SUM 12
1.0726 35 S 20 35 MF 6 212 M 36 SUM 41
1.0727 45 S 20 45 MF 61, 45 MF 4 212 M 36 SUM 42
1.0728 60 S 20 — — —
1.0736 9 SMn 36 S 300 240 M 07 SUM 25
1.0737 9 SMnPb 36 S 300 Pb — SUM 24 L
1.1121 Ck 10 (C 10 E) XC 10 045 M 10, 040 A 10 S 9 CK, S 10 C
1.1141 Ck 15 (C 15 E) XC 12, XC 15 080 M 15, 040 A 15 S 15, S 15 Ck
1.1151 C 22 E 2 C 22, XC 18/25 055 M 15 S 20 C, S 20 CK, S 22 C
1.1157 40 Mn 4 35 M 5, 40 M 5 150 M 36 —
1.1158 C 25 E 2 C 25, XC 25 070 M 26 S 25 C, S 28 C
Technical Information
WID_Master16_Taps_Y110_Y111_Metric_REBRAND.indd 110 10/30/15 3:06 PM
Y111
LViWID M 16 T Y110 Y111 M i REBRANDO b 23 20159 58AM
widia.com
Technical Information
Material Technical Information
UNI - l UNE - E AISI - US condition
material
group
G 10 FG 10 Class 20 B U 15
G 15 FG 15 Class 25 B U 15
G 20 FG 20 Class 30 B U 16
G 25 FG 25 Class 40 B U 16
G 30 FG 30 Class 45 B U 16
G 35 FG 35 Class 50 B U 16
— — — GG/AU 17
— — — GG/AU 17
— — — GG/AU 17
— — — GG/AU 18
— — — GG/AU 31
GS 400-12 — Grade 60-40-18 U 17
——— U17
GS 500-7 — Grade 65-45-12 U 17
GS 600-3 — Grade 80-55-06 U 18
GS 700-2 — Grade 100-70-03 U 18
GS 800-2 — Grade 120-90-02 U 18
— — — GGG/AU 17
— — — GGG/AU 17
— — — GGG/AU 18
— — — GGG/AU 17
— — — GGG/AU 17
— — — GGG/AU 31
— — — GGG/AU 31
———G20
W 38-12 — — G 19
W 40-05 — — G 19
W 45-07 — — G 19
B 35-10 Type A Grade 22010, 32510 G 19
P 45-06 Type E — G 19
P 55-04 Type C — G 20
P 65-02 — — G 20
P 70-02 — — G 20
———GO40
———GO40
———GO40
———GO40
———GO40
———GO40
———GO40
———GO40
C 10 F. 1511 1010 — 1
C 15, C 16 F. 111 1015 — 1
1 C 22, C 20, C 21 1 C 22, F. 112 1020, 1023 — 1
C 25, 1 C 25 — 1025 var
1
2–3
C 35, 1 C 35 1 C 35, F. 113 1035 var
1
2–3
C 45, 1 C 45 1 C 45, F. 114 1045 var
1
2–3
1 C 40 1 C 40, F. 114. 1040 var
1
2–3
1 C 30 1 C 30 1030 var
1
2–3
C 55, 1 C 55 1 C 55 1055 var
1
4–5
1 C 50 1 C 50 1050 var
1
2–3
Fe 510 C FN AE 355 D, Fe 510 D1 FF — — 2
C 60, 1 C 60 1 C 60 1060 var
1
4–5
CF 9 SMn 28, CF 9 M 07 F. 2111 1213 1 —
CF 9 SMnPb 28 F. 2112 12 L 14, 12 L 13 — 1
CF 10 S 20 F. 2121 1102, 1108, 1109 — 1
CF 10 SPb 20 F. 2122 1108, 11 L 08 — 1
CF 35 SMn 10 F. 2131, F. 210. 1141, 1140 var
1
2–3
CF 44 SMn 28 F. 2133 1146 var
1
2–3
— — 1151 var
1
4–5
CF 9 SMn 36 F. 2113 1215 — 1
CF 9 SMnPb 36 F. 2114 12 L 14 — 1
C10, 2 C 10 F. 1510, C 10 1010 — 1
C 15, C 16 F. 1110, F. 1511 1015 — 1
C 20, C 25 F. 1120 1020, 1023 — 1
— — 1035, 1041 var
1
2–3
C 25 F. 1120 1025 var
1
2–3
Technical Information
WID_Master16_Taps_Y110_Y111_Metric_REBRAND.indd 111 10/30/15 3:06 PM
Y112
LViWID M 16 T Y112 Y113 M i REBRAND D b 22 2015 12 40 PM
widia.com
Technical Information
Material Technical Information
material
number DIN EN - D AFNOR - F BS - UK JIS
1.1170 28 Mn 6 28 Mn 6, 35 M 5 28 Mn 6, 150 M 19 SMn 433
1.1178 C 30 E — 2 C 30, XC 32 S 30 C
1.1181 C 35 E 2 C 35, XC 38 H 1 080 M 36 S 35 C
1.1183 Cf 35 XC 42 TS 080 A 35 S 35 C
1.1186 C 40 E 2 C 40, XC42 H 1 2 C 40, 080 M 40 S 40 C
1.1191 C 45 E XC 48 H 1, 2 C 45 2 C 45, 080 M 46 S 45 C
1.1193 Cf 45 XC 42 TS 060 A 47 S 45 C
1.1203 C 55 E 2 C 55, XC 55 H 1 2 C 55, 070 M 55 S 55 C
1.1206 C 50 E 2 C 50 2 C 50, 080 M 50 S 50 C
1.1213 Cf 53 42 M 4 TS 060 A 57 S 50 C
1.1221 C 60 E 2 C 60 2 C 60, 060 A 62 S 58 C
1.2241 51 CrV 4 50 CV 4 735 A 51 SUP 10
1.2369 81 MoCrV 42-16 — — —
1.3505 100 Cr 6 100 C 6 535 A 99 SUJ 2
1.3520 100 CrMn 6 — 535 A 99 SUJ 3
1.3533 17 NiCrMo 14 16 NCD 13 — —
1.3536 100 CrMo 7-3 — — —
1.3537 100 CrMo 7 100 CD 7 — SUJ 4
1.3541 X 45 Cr 13 — — —
1.3543 X 102 CrMo 17 Z 100 CD 17 — SUS440 C
1.3551 80 MoCrV 42-16 80 DCV 40 — —
1.3553 X 82 WMoCrV 6-5-4 Z 85 WDCV 6 BM 2 SKH 51
1.3558 X 75 WCrV 18-4-1 — BT 1 SKH 2
1.4000 X 6 Cr 13 Z 6 C 13 403 S 17 SUS 410 S
1.4002 X 6 CrAl 13 Z6 CA 13 405 S 17 SUS 405
1.4005 X 12 CrS 13 Z12 CF 13 416 S 21 SUS 416
1.4006 X 12 Cr 13 (X 10 Cr 13) 10 C 13, Z 12 C 13 410 S 21 SUS 410
1.4007 X 35 Cr 14 — — SUS 420
1.4016 X 6 Cr 17 Z 8 C 17 430 S 17 SUS 430
1.4021 X 20 Cr 13 Z 20 C 13 420 S 37 SUS 420
1.4024 X 15 Cr 13 — 403 S 17 —
1.4028 X 30 Cr 13 30 C 13, Z 33 C 13 420 S 45 SUS 420
1.4034 X 46 Cr 13 Z 40 C 14 420 S 45 SUS 420
1.4057 X 20 CrNi 17-2 Z 15 CN 16-02 431 S 29 SUS 431
1.4104 X 12 CrMoS 17 Z 10 CF 17 441 S 29 SUS 430 F
1.411 X 90 CrMoV 1 — — SUS 440 B
1.4113 X 6 CrMo 17-1 Z 8 CD 17-01 434 S 17 SUS 434
1.4125 X 105 CrMo 17 Z100 CD 17 — SUS 440 C
1.4301 X 5 CrNi 18-10 (X 4 CrNi 18-10) Z 6 CN 18-09 304 S 16 SUS 304
1.4303 X 5 CrNi 18-12 (X 4 CrNi 18-12) Z 8 CN 18-12 305 S 19 —
1.4305 X 10 CrNiS 18-9 Z 10 CNF 18-09 303 S 21 SUS 303
1.4306 X 2 CrNi 19-11 Z 2 CN 18-10 304 S 11 SUS 304 L
1.4307 X 2 CrNi 18-9 Z 3 CN 18-10 304 S 11 SUS 304 L
1.4310 X 12 CrNi 17-7 Z 11 CN 18-08 301 S 21 SUS 301
1.4311 X 2 CrNiN 18-10 Z 3 CN 18-10 Az 304 S 61 SUS 304 LN
1.4362 X 2 CrNiN 23-4 Z 3 CN 23-04 Az — —
1.4372 X 12 CrMnNiN 17-7-5 Z 12 CMN 17-07 Az — —
1.4401 X 5 CrNiMo 17-12-2 (X 4 CrNiMo 17-12-2) Z 6 CND 17-11 316 S 31 SUS 316
1.4404 X 2 CrNiMo 17-13-2 (X 2 CrNiMo 17-12-2) Z 2 CND 17-12 316 S 11 SUS 316 L
1.4406 X 2 CrNiMoN 17-11-2 (X 2 CrNiMoN 17-11-2) Z 2 CND 17-11 Az 316 S 62 SUS 316 LN
1.4410 X 2 CrNiMoN 25-7-4 Z 3 CND 25-06 Az — —
1.4418 X 4 CrNiMo 16-5 Z 6 CND 16 05 1 — —
1.4429 X 2 CrNiMoN 17-13-3 Z 2 CND 17-13 Az — SUS 316 LN
1.4432 X 2 CrNiMo 17-12-3 Z 3 CND 17-12-03 316 S 13 SUS 316 L
1.4434 X 2 CrNiMoN 17-12-3 Z 3 CND 19-14 Az — SUS 317 LN
1.4435 X 2 CrNiMo 18-14-3 Z 2 CND 17-13 316 S 13 SUS 316 L
1.4436 X 5 CrNiMo 17-13-3 (X 4 CrNiMo 17-13-3) Z 6 CND 17-12 316 S 33 SUS 316
1.4438 X 2 CrNiMo 18-16-4 (X 2 CrNiMo 18-15-4) Z 2 CND 19-15 317 S 12 SUS 317 L
1.4439 X 2 CrNiMoN 17-13-5 3 CND 18-14-05 Az — —
1.4441 X 2 CrNiMo 18-15-3 Z 3 CND 18-14-13 316 S 13 —
1.4460 X 4 CrNiMoN 27-5-2 (X 3 CrNiMoN 27-5-2) 25 CND 27-05 A2 — SUS 329
1.4462 X 2 CrNiMoN 22-5-3 Z2 CND 22-05 Az — —
1.4466 X 1 CrNiMoN 25-22-2 (X 2 CrNiMoN 25-22-2) — — —
1.4504 [X 8 CrNiAl 17-7] Z 8 CNA 17-07 316 S 111 17-7 PH
1.4510 X 6 CrTi 17 (X 3 CrTi 17) Z 8 CT 17 — —
1.4512 X 6 CrTi 12 (X 2 CrTi 12) Z 3 CT 12 409 S 19 SUH 409
1.4532 X 7 CrNiMoAl 15-7 (X 8 CrNiMoAl 15-7-2) Z 8 CNDA 15-7 — —
1.4540 X 4 CrNiCuNb 16-4 Z 6 CNU 17-04 — SUS 630
1.4541 X 6 CrNiTi 18-10 Z 6 CNT 18-10 321 S 12 SUS 321
Technical Information
WID_Master16_Taps_Y112_Y113_Metric_REBRAND.indd 112 12/22/15 2:15 PM
Y113
LViWID M 16 T Y112 Y113 M i REBRANDD b 22 201512 40PM
widia.com
Technical Information
Material Technical Information
UNI - l UNE - E AISI - US condition
material
group
28 Mn 6 28 Mn 6, 36 Mn 1330 var12–3
2 C 30, 080 M 30 2 C 30 — var12–3
2 C 35, C 35 2 C 35, C 35 k — var12–3
C 36 C 38 k 1035 var12–3
2 C 40, C40 2 C 40, C 42 k 1040 var12–3
2 C 45, C 45 2 C 45, C 45 k — var12–3
C 43 C 42 k 1045 var12–3
2 C 55, C 55 2 C 55, C 55 k — var14–5
2 C 50, C 50 2 C 50, C 55 k 1050 var12–3
C 48 C 48 k 1050 var12–3
2 C 60, C 60 2 C 60 — var14–5
50 CrV 4 F.1430 6150 var16–9
— — 613 var110–11
100 Cr 6 — 52100 var16–9
100 CrMo 7 — A 485/2 var16–9
— — E-3310 var16–9
— — 5120 var16–9
100 CrMo 7 — A 485/3 var16–9
X 45 Cr 13 — — var110–11
X 105 CrMo 17 — 440 C var110–11
X 80 MoCrV 44 — — var110–11
X 82 WMoV 6 5 — M2 regular C var110–11
X 75 WCrV 18 — T 1 var110–11
X5 Cr 13 — 410 S FE 12
X 6 CrA 13 — 405 FE 12
X 12 CrS 13 — 416 FE 12
X 12 Cr 13 — 410 MA 12
— — 420 MA 12
X 8 Cr 17 — 430 FE 12
X 20 Cr 13 — 420 MA 12
— — 403 MA 12
— — 420 MA 13.1
— — 420 MA 13.1
X 15 CrNi 16 — 431 MA 13.1
X 10 CrS 17 — 430 F MA 13.1
— — 440 B MA 13.1
X 8 CrMo 17 — 434 MA 13.1
— — 440 C MA 13.1
X 5 CrNi 18 10 — 304 AU 14.1
X 8 CrNi 18 12 — 305 AU 14.1
X 10 CrNiS 18 09 — 303 AU 14.1
X 2 CrNi 18 11 — 304 L AU 14.1
— — 304 L AU 14.1
X 12 CrNi 17 07 — 301 AU 14.1
— — 304 LN AU 14.1
— — — DU 14.2
— — 201 DU 14.2
X 5 CrNiMo 17 12 — 316 AU 14.1
X 2 CrNiMo 17 12 — 316 L AU 14.1
X 2 CrNiMoN — 316 LN AU 14.1
— — — DU 14.2
— — — MA 13.1
X 2 CrNiMoN 17 13 — 316 LN AU 14.1
— — 316 L AU 14.1
— — 317 LN AU 14.1
X 2 CrNiMo 17 13 — 316 L AU 14.1
X 5 CrNiMo 17 13 — 316 AU 14.1
X 2 CrNiMo 18 16 — 317 L AU 14.1
— — — AU 14.1
— — 316 LVM AU 14.1
—— 329 DU 14.2
— — 2205 DU 14.2
— — 310 mod S-AU 14.3
X 2 CrNiMo 17.12 — 17-7 PH AU-PH 14.4
— — 439, 430 Ti FE 12
— — 409 FE 12
— — 632 AU 14.1
— — 630 AU 14.1
X 6 CrNiTi 18 11 — 321 AU 14.1
Technical Information
WID_Master16_Taps_Y112_Y113_Metric_REBRAND.indd 113 12/22/15 2:15 PM
Y114
LViWID M 16 T Y114 Y115 M i REBRAND O b 23 2015 9 58 AM
widia.com
Technical Information
Material Technical Information
material
number DIN EN - D AFNOR - F BS - UK JIS
1.4542 X 5 CrNiCuNb 17-4 Z 6 CNU 17-04, Z 7 CNNb 17-07 — SUS 630
1.4548 X 5 CrNiCuNb 17-4-4 Z 7 CNNb 17-07 — SUS 630
1.4550 X 6 CrNiNb 18-10 Z 6 CNNB 18-10 347 S 17 SUS 347
1.4552 GX 5 CrNiNb 19-10 (G-X 5 CrNiNb 18-9) Z 6 CNNb 18.10 M 347 C 17 SCS 21
1.4567 X 3 CrNiCu 18-9 (X 3 CrNiCu 18-9-4) Z 3 CNU 18-09 FF — —
1.4568 X 7 CrNiAl 17-7 Z 8 CNA 17-7 316 S 111 17-7 PH
1.4571 X 6 CrNiMoTi 17-12-2 Z 6 CNDT 17-12 320 S 31 SUS 316 Ti
1.4573 X 10 CrNiMoTi 18-12 Z 6 CNDT 17-13 320 S 33 —
1.4580 X 6 CrNiMoNb 17-12-2 Z 6 CNDNb 17-12 — —
1.4581 GX 5 CrNiMoNb 19-11 (G-X 5 CrNiMoNb 18-10) Z 4 CNDNb 18.12 M 318 C 17 SCS 22
1.4583 X 10 CrNiMoNb 18-12 Z 6 CNDNb 17-13 — —
1.4713 X 10 CrAl 7 Z 8 CA 7 — —
1.4718 X 45 CrSi 9-3 Z 45 CS 9 401 S 45 SUH 1
1.4720 X 7 CrTi 12 Z 6 CT 12 — SUS 409
1.4724 X 10 CrAl 13 Z 10 C 13 403 S 17 SUS 405
1.4731 X 40 CrSiMo 10-2 Z 40 CSD 10 — SUH 3
1.4742 X 10 CrAl 18 Z 12 CAS 18, Z 10 CAS 18 430 S 17 SUS 430
1.4748 X 85 CrMoV 18-2 Z 85 CDV 18.02 — —
1.4762 X 10 CrAl 24 Z10 CAS 24 — SCH446
1.4821 X 20 CrNiSi 25-4 Z 20 CNS 25.04 — —
1.4828 X 15 CrNiSi 20-12 Z 15 CN 23-13, Z 15 CNS 20-12 309 S 24 SUS 309 S
1.4833 X 7 CrNi 23-14 Z 15 CN 23.13, Z 15 CN 24.13 309 S 16 SUH 309
1.4841 X 15 CrNiSi 25-20 Z 15 CNS 25-20, Z 12 CNS 25-20 310 S 24 SUS310
1.4845 X 12 CrNi 25-21 Z 12 CN 26.21, Z 12 CN 25.20 310 S 31 SUH 310
1.4864 X 12 NiCrSi 36-16 Z 20 NCS 33.16, Z 12 NCS 35.16 — SUH 330
1.4871 X 53 CrMnNiN 21-9 Z 53 CMN 21.09 Az 349 S 54 SUH 35
1.4873 X 45 CrNiW 18-9 Z 35 CNWS 14.14 331 S 40 SUH 31
1.4875 X 55 CrMnNiN 20-8 Z 55 CMN 20.08 Az — —
1.4876 X 10 NiCrAlTi 32-20 Z 8 NC 33.21, Z 8 NC 32.21 — —
1.487 X 12 CrNiTi 18-9 Z 6 CNT 18.12, Z 6 CNT 18.10 321 S 12, 321 S 51 SUS 321
1.4948 X 6 CrNi 18-11 Z 6 CN 18-09 304 S 51 SUS304
1.5023 38 Si 7 46 S 7 — —
1.5092 60 SiCr 7 61 SC 7 251 A 61 SUP 7
1.5919 15 CrNi 6 16 NC 6 815 M 17 SNC 15
1.5920 18 CrNi 8 20 NC 6 822 M17 SNCM 616
1.6511 36 CrNiMo 4 36 CrNiMo 4 36 CrNiMo 4, 817 A 37 SNCM 439
1.6580 30 CrNiMo 8 30 CrNiMo 8, 30 CND 8 30 CrNiMo 8 SNCM 630
1.6582 34 CrNiMo 6 34 CrNiMo 6 34 CrNiMo 6, 817 M 40 SNCM 447
1.6587 17 CrNiMo 6 18 NCD 6 820 M 17 SNCM 815
1.7003 38 Cr 2 38 Cr 2 38 Cr 2, 120 M 36 SMn 438
1.7003 46 Cr 2 46 Cr 2, 42 C 2 46 Cr 2, 605 M 36 SMn 443
1.7030 28 Cr 4 30 CD 4 530 A 30 —
1.7033 34 Cr 4 34 Cr 4, 32 C 4 34 Cr 4, 530 A 32 SCr 430
1.7034 37 Cr 4 37 Cr 4, 38 C 4 37 Cr 4, 530 A 36 SCr 435
1.7035 41 Cr 4 41 Cr 4, 42 C 4 41 Cr 4, 530 M 40 41 Cr 4SCr 440
1.7037 34 CrS 4 34 CrS 4, 32 C 4 34 CrS 4, 530 A 32 —
1.7038 37 CrS 4 37 CrS 4, 38 C 4 37 CrS 4, 530 A 36 —
1.7039 41 CrS 4 41 CrS 4, 42 C 4 41 CrS 4, 530 M 40 —
1.7102 54 SiCr 6 51 S 7 251 A 58 SKD12
1.7131 16 MnCr 5 16 MC 5 527 M 17 —
1.7147 20 MnCr 5 20 MC 5 — SMnC 420
1.7176 55 Cr 3 55 C 3 525 A 60 SUP 9
1.7213 25 CrMoS 4 25 CrMoS 4, 25 CD 4 25 CrMoS 4, 708 A 25 —
1.7218 25 CrMo 4 25 CrMo 4, 25 CD 4 25 CrMo 4, 708 A 25 SCM 430
1.7220 34 CrMo 4 34 CrMo 4, 34 CD 4 34 CrMo 4, 708 A 37 SCM 435
1.7225 42 CrMo 4 42 CrMo 4, 42 CD 4 42 CrMo 4, 708 M 40 SCM440
1.7226 34 CrMoS 4 34 CrMoS 4, 34 CD 4 34 CrMoS 4708 A 37 —
1.7227 42 CrMoS 4 42 CrMoS 4, 42 CD 4 42 CrMoS 4, 708 M 40 —
1.7228 50 CrMo 4 50 CrMo 4 50 CrMo 4, 708 A 47 —
1.7321 20 MoCr 4 — 805 M 20 SNCM 220
1.7325 25 MoCr 4 18 CD 4 — —
1.7361 32 CrMo 12 30 CD 12 722 M 24 —
1.7701 51 CrMoV 4 51 CDV 4 — SUP 13
1.8159 51 CrV 4 51 CrV 4, 50 CV 4 51 CrV 4 SUP 10
1.8507 34 CrAlMo 5 — — —
1.8509 41 CrAlMo 7 40 CAD 6 12 905 M 39 —
1.8515 31 CrMo 12 30 CD 12 722 M 24 —
1.8523 39 CrMoV 13-9 — 897 M 39 —
1.8550 34 CrAlNi 7 — — —
Technical Information
WID_Master16_Taps_Y114_Y115_Metric_REBRAND.indd 114 10/30/15 3:06 PM
Y115
LViWID M 16 T Y114 Y115 M i REBRANDO b 23 20159 58AM
widia.com
Technical Information
Material Technical Information
UNI - l UNE - E AISI - US condition
material
group
— — 630 AU-PH 14.4
— — 630 AU-PH 14.4
X 8 CrNiNb 18 11 — 347 AU 14.1
— — — AU 14.1
— — 302 HQ AU 14.1
X 2 CrNiMo 17.12 — 17-07 PH AU-PH 14.4
X 6 CrNiMoTi 17 12 — 316 Ti AU 14.1
X 6 CrNiMoTi 17 12 — (316 Ti) AU 14.1
X 6 CrNiMoNb 17 12 — 316 Cb AU 14.1
GX 6 CrNiMoNb 20 11 — — AU 14.1
X 6 CrNiMoNb 17 13 — 316 Cb, (318) AU 14.1
— — — FE 10–11
X 45 CS 8 — HNV 3 — 31–32
— — 409 — 31–32
X 10 CrAl 12 X 10 CrAl 13 405 FE 12
————12
X 8 Cr 17 X 10 CrAl 18 430 — 12
— — — — 31–32
X 16 Cr 26 — 446 — 12
— X 15 CrNiSi 25 04 — DU 14.2
— X 10 CrNiSi 20 309 AU 14.1
X 6 CrNi 23 14 — 309 S AU 14.1
X 16 CrNiSi 25 20 X 15 CrNiSi 25 20 310 AU 14.1
— — 310 S AU 14.1
— X 12 NiCrSi 36 16 330 — 31–32
— — EV 8 — 10
X 45 CrNiW 18 9 — EV 9 — 31–32
— — EV 11 — 31–32
— X 10 NiCrAlTi 32 20 — S-AU 31–32
X 6 CrNiTi 18 11 — 321, 321 H — 31–32
— — 304H AU 14.1
— — — var1 6–9
60 SiCr 8 F.1442 9260 var1 6–9
— F.1581 4320 var1 6–9
16 NiCrMo 12 F.1525 — var1 6–9
36 CrNiMo 4, 39 NiCrMo 3 1 36 CrNiMo 4, 40 NiCrMo 4 — var1 6–9
SNCM 630 30 CrNiMo 8, 32 NiCrMo 16 — var1 6–9
34 CrNiMo 6 34 CrNiMo 6 4340 var1 6–9
18 NiCrMo 12 F.1560 — var1 6–9
38 Cr 2 38 Cr 2, 38 Cr 3 — var1 6–9
46 Cr 2 46 Cr 2 — var1 6–9
— — — var1 6–9
34 Cr 4 34 Cr 4 5132 var1 6–9
37 Cr 4 37 Cr 4, 38 Cr 4 5135 var1 6–9
41 Cr 4 41 Cr 4, 42 Cr 4 5140 var1 6–9
34 CrS 4 34 CrS 4 — var1 6–9
37 CrS 4 37 Cr 4, 38 Cr 4-1 — var1 6–9
41 CrS 4 41 CrS 4, 42 Cr 4-1 — var1 6–9
48 Si 7 F.1450 9260 var1 6–9
16 MnCr 5 F.1516 — var1 6–9
20 MnCr 5 F.1523 — var1 6–9
55 Cr 3 — 5155 var1 6–9
25 CrMoS 4, 25 CrMo 4 25 CrMoS 4, 30 CrMo 4-1 — var1 6–9
25 CrMo 4 25 CrMo 4, 30 CrMo 4 4130 var1 6–9
34 CrMo 4, 35 CrMo 4 34 CrMo 4, 35 CrMo 4 4137 var1 6–9
42 CrMo 4 42 CrMo 4 — var1 6–9
34 CrMoS 4, 35 CrMo 4 34 CrMoS 4, 35 CrMo 4 — var1 6–9
42 CrMoS 4, 42 CrMo 4 42 CrMoS 4, 40 CrMo 4-1 — var1 6–9
50 CrMo 4 50 CrMo 4 4150 var1 6–9
16 NiCrMo 2 F.1523 8620 var1 6–9
20 NiCrMo 2 — 8625 var1 6–9
— — — var1 6–9
51 CrMoV 4 — — var1 6–9
51 CrV 4, 50 CrV 4 51 CrV 4 6150 var1 6–9
— 35 CrAlMo 5 A 355/D var1 6–9
41 CrAlMo 7 41 CrAlMo 7 A 355/A var1 6–9
31 CrMo 12 31 CrMo 12 — var1 6–9
36 CrMoV 12 — — var1 6–9
— — A 355/C var1 6–9
Technical Information
WID_Master16_Taps_Y114_Y115_Metric_REBRAND.indd 115 10/30/15 3:06 PM
LViWID M 16 I d Z002 Z145 M i REBRAND O b 28 2015 3 09 PM
Z2 widia.com
Index by Order Number
Order No. Catalogue No. Page(s)
1016374 ..... KLS40M ......................M12, M36, W64
1016538 ..... SM820 K9..................................... C36
1016544 ..... SM837 K9...................C37, C39, C109
1016546 ..... SM840 K9.....................C36–37, C108
1016548 ..... SM841 K9.......................C37–39, C65
1016602 ..... SKTP343 K9 ................................. C48
1016624 ..... SKCP343 K9 ................................. C42
1016626 ..... SKDP343 K9 ........................... C43–45
1016628 ..... SKCP453 K9 ......................... C42, C67
1016644 ..... IWSN433 K9 .........................C19, C59
1016648 ..... ITSN323 K9........................... C16, C58
1016674 ..... ISSN433 K9 ............................ C12–15
1016678 ..... ICSN433 K9 ......................C8–10, C56
1016680 ..... IDSN433 K9 ....................C11, C56–57
1016682 ..... IDSN443 K9 .................................. C11
1017174 ..... SMYE3 K9 ................F70–72, F74, F77
1017176 ..... SMYI3 K9 .................F70–72, F74, F77
1017178 ..... SMYE4 K9 ................F70–72, F74, F77
1017180 ..... SMYI4 K9 .................F70–72, F74, F77
1017220 ..... ITSN322 K9.........................C102–103
1017226 ..... IVSN322 K9 ....................C17–18, C58
1017228 ..... SKVN343 K9 ........................... C48–49
1017230 ..... IDSN432 K9 ............................ C95–96
1017248 ..... IRSN44 K9 .................................... C12
1017252 ..... ICSN432 K9 ............................ C92–94
1017276 ..... ITSN433 K9.................C16, C102–103
1017278 ..... ISSN432 K9 .......................... C97–101
1017282 ..... IVSN432 K9 .................................. C17
1017294 ..... ITSN534 K9.........................C16, C102
1017298 ..... ICSN533 K9 .................................. C56
1017300 ..... ISSN633 K9 ........................C97, C101
1017334 ..... ICSN633 K9 .................................. C94
1018413 ..... CM109...................................E79, F32
1018531 ..... CM-72 .............................F28–29, F34
1018533 ..... CM73 ...............................F28–29, F34
1018569 ..... CM80 ............................. E76, F24, F27
1018571 ..... CM81 ..................... E74, E76, F25, F27
1019661 ..... MS1495 .............................. E124–125
1019940 ..... S310 ....................................... F24–25
1020058 ..... S352 ....................................... F24–25
1020577 ..... CKM7 ......................................C36–37
1020581 ..... CKM9 ......................................C36–39
1020583 ..... CKM10............................C36–39, C65
1020597 ..... CKM13.......................................... C37
1020601 ..... CKM19............................C38–39, C65
1020603 ..... CKM20........................................ C108
1020657 ..... CKM41.......................................... C95
1020787 ..... KUAM20 ......... C110–111, C113–117,
C119, C126–129
1020789 ..... KUAM22 ................C92–94, C97–103,
C106–109
1020791 ..... KUAM23 ..................C104–105, C112,
C119–122, C124,
C126–129
1020805 ..... KUAM26 ...........................C102, C108
1020807 ..... KUAM27 .....................C94, C97, C101
1020809 ..... KUAM28 ... C92, C97–101, C104–110,
C112–113, C118–121,
C123–129
1020811 ..... KUAM30 ... C92, C97–101, C106–110,
C112–113, C118–121,
C123–129
1020813 ..... KUAM31 ..... C92–94, C97–109, C112,
C119–122, C124,
C126–129
1020835 ..... KUAM32 ........... C92–105, C108–109,
C112, C120, C124
1020839 ..... KUAM34 ......... C110–111, C113–117,
C119, C126–129
1020841 ..... KUAM35 ........ C110, C113, C115–116
1020843 ..... KUAM25 ..........C92–103, C109, C112,
C120, C124
1020857 ..... CKM38........................................ C102
1020917 ..... SRS3 .......................................C42–49
1020919 ..... SRS4 .......................C42–47, C67, C73
1020923 ..... SSY3T ......................F70–72, F74, F77
1020935 ..... SSY4T ......................F70–72, F74, F77
1020941 ..... SSN2T............................F70, F74, F77
1020943 ..... SSA3T ......................F70–72, F74, F77
1020965 ..... SSA4T ......................F70–72, F74, F77
1020969 ..... MS110 .......................................... C65
1020971 ..... MS111 ..........................C36–39, C108
1020973 ..... MS412 .........................................E122
1020975 ..... MS125 ........................C37, C39, C109
1021007 ..... MS1321 .................................. C40–41
1021049 ..... MS318 .........................................E122
1021053 ..... MS1071 .......................................E125
1021085 ..... MS1073 .......................................E125
1021095 ..... MS518 .........................................E128
1021097 ..... MS352 ......... E74, E76, E127, F25, F27
1021135 ..... MS959 .......................................... C36
1021137 ..... MS960 .................................... C37–39
1021143 ..... MS364 ............... C94, C97, C101–102
1021327 ..... MS1242 ......................M23, M31, M36
1021337 ..... MS1152 ............. C126–129, V10, V13,
V16, V19
1021339 ..... MS1153 .......... C42–45, C48, C66–67,
C69–73, C75–76, C78–81,
C110–111, C113–119,
C126–129
1021341 ..... MS1155 .................C42, C44, C66–67,
C69–73, C75–76, C78–81,
C110, C112–113, C119–121,
C123–129
1021343 ..... MS1156 .................................. C42–49
1021375 ..... MS1158 ..................C42–47, C67, C73
1021421 ..... STCM9 ...C36, C38–39, C65, C92–103
1021423 ..... STCM11 ...................................... C108
1021451 ..... STCM4 .................................... C36–39
1021453 ..... STCM5 .......................................... C37
1021455 ..... STCM8 ...........C36–39, C65, C94, C97,
C101, C109
1021505 ..... STCM37 ..............................C102–103
1021507 ..... STCM38 .................C92–94, C97–103,
C106–109
1021509 ..... STCM39 ...................................... C102
1021511 ..... STCM40 ..........................C95, C97–99
1021535 ..... KLM43 ................... C92–94, C97–101
1021537 ..... KLM46 ......... C92, C94–96, C102–103
1021539 ..... KLM58 ........................................ C102
1021541 ..... KLM68 ........................C94, C97, C101
1021543 ..... KLM33L .............................. C102–103
1021565 ..... KLM34L .............................. C102–103
1021569 ..... KLM46S ................................C92–101
1021591 ..... FT7 ......................................... U42–43
1021593 ..... FT8 ......................................... U42–43
1021605 ..... FT15 ....................................... U42–43
1021607 ..... FT20 ............................................. U42
1022436 ..... CKM37.................................... C97–99
1022519 ..... TT25 ...................... V10, V13, V16, V19
1053706 ..... MS1254 ...............................M62, M67
1056234 ..... SKSP453 K9 ........................... C46–47
1059844 ..... MS326 ............................ E30–31, E34
1067609 ..... CKC3 ...............................F71–72, F77
1067610 ..... CKC4 ...............................F71–72, F77
1067613 ..... CM74 .................... E74, E76, E78, F24,
F27–29, F31, F34
1067614 ..... CM75 .................... E74, E76, E78, F25,
F27–29, F31, F34
1067630 ..... CM146.....................E78, F31, F34–35
1067631 ..... CM147.....................E78, F31, F34–35
1093271 ..... 75HC060M ..................................T117
1093272 ..... 75HC080M ..................................T117
1093273 ..... 75HC100M ..................................T117
1093524 ..... 75HC120M ..................................T117
1093525 ..... 75HC140M ..................................T117
1093526 ..... 75HC160M ..................................T117
1099381 ..... CM182...................................E75, F26
1099382 ..... CM183...................................E75, F26
1099429 ..... SM819 K9............................... C37–39
1099440 ..... SKSP343 K9 ........................... C46–47
1099444 ..... SKDP453 K9 ...................C43–45, C73
1099445 ..... SKSN566K K9 .........................C97–99
1099446 ..... SKRN100300 K9 ........................... C45
1099447 ..... SKRN160400 K9 ........................... C45
1099451 ..... ICSN332 K9 .................................... C9
1099452 ..... IDSN322 K9 ....................C11, C56–57
1099614 ..... MS1933 .............C78–79, C110, C113,
C115–116
1099615 ..... MS1939 ..........................C67, C69–70
1099631 ..... SRS5 ............................................. C45
1099640 ..... MS1034 .................................E79, F32
1099643 ..... MS1154 .............................. C45, C119
1099644 ..... MS1157 ...................C67, C112, C120,
C122, C124
1099645 ..... MS1160 .........C45, V10, V13, V16, V19
1099646 ..... MS1200 .....E74–76, E78, F24–27, F31
1099649 ..... KLM33 ..........................C92, C97–101
1099650 ..... KLM54 ....................................C97–99
1108062 ..... 515.018................... C20–30, C60–61
1108063 ..... 513.023...................C20–30, C60–61,
C104–105
1108065 ..... 511.023...................C20–22, C25–30,
C60–61, C104–105
1108068 ..... 512.112............... C20–22, C60, C104
1116889 ..... CKM34...................C92–94, C96–103,
C106–109
1120807 ..... 552.240.................................. C33–34
1121055 ..... 551.316..........................C31, C62–64
1121063 ..... 551.332........................................ C32
1121078 ..... 551.333........................................ C35
1121086 ..... 551.317..................C31–34, C62, C64
1121094 ..... 557.111......... C31, C33–35, C62, C64
1121102 ..... 557.125.................................. C32–33
1121205 ..... 552.232.................................. C63–64
1121232 ..... 552.221..........................C31–32, C62
1121239 ..... 552.220................................ C31, C62
1121265 ..... 552.225........................................ C63
1121273 ..... 552.228.................................. C32–33
1121302 ..... 552.230........................................ C35
1121313 ..... 552.229........................................ C35
1121346 ..... 554.252................... C31–35, C62–64
1121353 ..... 554.253........................................ C62
1121362 ..... 554.254........................................ C63
1122009 ..... 512.111........................................ C22
1127019 ..... MS1162 .........................................E36
1129648 ..... MS1234 ................................J24, M23
1131459 ..... MS1488 .................... F28–29, F34–35
1131545 ..... 512.135................................ C30, C61
1131646 ..... 191.405............ C97–101, C106–110,
C112–113, C118–121,
C123–129
1131653 ..... 191.406...... C92–94, C97–109, C112,
C119–122, C124,
C126–129
1131658 ..... 191.407............ C92–105, C108–109,
C112, C120, C124
1132119 ..... 191.725.................................. J20–24
1132436 ..... 191.848................................. M20–23
1132599 ..... ISSN846 K9 ..........................C12, C14
1133349 ..... SN3TPKG .......................................F77
1134385 ..... 192.432....... J4–8, V10, V13, V16, V19
1135392 ..... 512.134........................................ C30
1136414 ..... 192.932........................................M36
1136777 ..... 125.025.....J35, M12, M85, M91, M96
1136849 ..... 125.230................ J8, J35, M12, M85,
M91, M96
1137216 ..... 125.825..................................J35, M6
1137321 ..... 511.018..................C22, C26–30, C60
1137331 ..... 511.024.................................. C23–24
1137339 ..... 511.025...................C20–22, C25–27,
C60, C104–105
1137346 ..... 511.028........................................ C29
1137353 ..... 511.030........................................ C61
1137382 ..... 511.033................... C20–22, C25–27
1137396 ..... 511.038.................................. C25–27
1137452 ..... 511.060........................................ C23
1137453 ..... 129.025......................M55, M62, M67
1137493 ..... 129.512........................................M67
1137509 ..... 512.013..........................C28–29, C60
1137533 ..... 512.023..........................C28–29, C60
1137541 ..... 512.025........................C25–27, C105
1137585 ..... 512.031........................................ C29
1137600 ..... 512.053.................................. C26–27
1137610 ..... 512.060........................................ C23
1137616 ..... 512.063........................C25–27, C105
1137650 ..... 512.083.................................. C25–27
1137670 ..... 512.092.................................. C25–27
1137678 ..... 512.100........................................ C34
1137686 ..... 512.101........................................ C34
1137710 ..... 512.117............... C20–22, C60, C104
1137736 ..... 512.123.................................. C20–22
1137789 ..... 512.153.................................. C23–24
1137987 ..... 513.018..........................C28–30, C60
1137996 ..... 513.019..........................C22, C26–27
1138003 ..... 513.020........................................ C34
1138029 ..... 513.025.......... C20–22, C25–27, C29,
C60, C104–105
1138057 ..... 513.033................... C20–22, C25–27
1138064 ..... 513.038.................................. C25–27
1138071 ..... 513.060........................................ C23
1138195 ..... 514.018........................................ C22
1138315 ..... 170.004........................................ C34
1138319 ..... 515.022...C20–22, C25–27, C29, C60
1138328 ..... 515.028.................................. C25–27
1138413 ..... 170.023.........................................L18
1138438 ..... 170.025..........................J20–24, L18,
M20–23, M28–31
1138446 ..... 170.026........................................M36
1138465 ..... 170.028.......................................J4–8
1146699 ..... CKM35................................. C94, C97,
C101–103, C109
1147002 ..... ICSN846 K9 .................................... C9
Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 2 11/2/15 10:33 AM
LViWID M 16 I d Z002 Z145 M i REBRANDO b 28 20153 09PM
Z3
widia.com
Index by Order Number
Order No. Catalogue No. Page(s)
1147828 ..... 511.022......................C60, C104–105
1175225 ..... 193.281.................V10, V13, V16, V19
1192341 ..... MS1072 .......................................E127
1230373 ..... CKM36..........................C92, C95–101
1243898 ..... 513.123........................................ C34
1243928 ..... 551.129........................................ C34
1243929 ..... 551.130........................................ C34
1260086 ..... CC09 ..............................D10–13, D63
1260087 ..... CC11 ............................................ D10
1271092 ..... FC11 ............................................. D16
1271093 ..... FC14 ....................................... D15–17
1274022 ..... ICSN643 K9 .............................. C8–10
1274659 ..... IRSN84 K9 .................................... C12
1274800 ..... ISSN443 K9 ............................ C12–15
1274805 ..... ISSN543 K9 ............................ C12–15
1274807 ..... ISSN643 K9 ............................ C12–15
1293458 ..... M41223 .......................................... R6
1293463 ..... M41428 ........................................ R12
1293468 ..... M41498 ........................................ R15
1293470 ..... M40342 .......................................... R9
1293476 ..... M41434 ........................................ R12
1293727 ..... M41228 .......................................... R6
1293733 ..... M41233 .......................................... R6
1293748 ..... M41402 ........................................ R11
1293770 ..... M41479 ........................................ R14
1315965 ..... MS1489 ...........................F28–29, F34
1319470 ..... IWSN322 K9 ................................. C19
1363654 ..... 56-1018 ................................. U40–45
1363761 ..... 56-1020 ................................. U40–45
1534016 ..... M41431 ........................................ R12
1546392 ..... SMYE5 K9 ............................... F70–72
1546393 ..... SMYI5 K9 .........................F71–72, F74
1570244 ..... 490614014CW TICN-CW .............. O66
1598896 ..... M41222 .......................................... R6
1602233 ..... D50203002RT TIALN-RT .............O134
1602235 ..... D50204002RT TIALN-RT .............O134
1602236 ..... D50205002RT TIALN-RT .............O134
1602239 ..... D50208003RT TIALN-RT .............O134
1602240 ..... D50210004RT TIALN-RT .............O134
1602251 ..... D50212005RT TIALN-RT .............O134
1602252 ..... D50216006RT TIALN-RT .............O134
1602266 ..... 463200400RT TIALN-RT ............. O117
1602268 ..... 463200500RT TIALN-RT ............. O117
1602270 ..... 463200600RT TIALN-RT ............. O117
1602273 ..... 463200800RT TIALN-RT ............. O117
1602274 ..... 463201000RT TIALN-RT ............. O117
1602275 ..... 463201500RT TIALN-RT ............. O117
1602538 ..... 465102000RT TIALN-RT ............. O119
1606050 ..... 50HC040M ..................................T117
1606061 ..... 50HC060M ..................................T117
1606062 ..... 50HC080M ..................................T117
1606064 ..... 50HC100M ..................................T117
1611066 ..... 465101000RT TIALN-RT ............. O119
1621087 ..... MS2002 .........................................E36
1656432 ..... 410201000.. UNCOATED ............ O136
1656436 ..... 410201500.. UNCOATED ............ O136
1656440 ..... 410202000.. UNCOATED ............ O136
1656444 ..... 410202500.. UNCOATED ............ O136
1656448 ..... 410203000.. UNCOATED ............ O136
1656454 ..... 410204001.. UNCOATED ............ O136
1656458 ..... 410205001.. UNCOATED ............ O136
1656459 ..... 410205002.. UNCOATED ............ O136
1656464 ..... 410206002.. UNCOATED ............ O136
1656468 ..... 410208003.. UNCOATED ............ O136
1656473 ..... 410210004.. UNCOATED ............ O136
1656478 ..... 410212005.. UNCOATED ............ O136
1656484 ..... 410214014.. UNCOATED ............ O136
1656488 ..... 410216006.. UNCOATED ............ O136
1656492 ..... 410218018.. UNCOATED ............ O136
1656496 ..... 410220007.. UNCOATED ............ O136
1656500 ..... 410303000.. UNCOATED ............ O139
1656501 ..... 410304001.. UNCOATED ............ O139
1656502 ..... 410304001CT TICN-CT ............... O139
1656503 ..... 410304002.. UNCOATED ............ O139
1656504 ..... 410305001.. UNCOATED ............ O139
1656505 ..... 410305002.. UNCOATED ............ O139
1656506 ..... 410306002.. UNCOATED ............ O139
1656507 ..... 410306002CT TICN-CT ............... O139
1656508 ..... 410308003.. UNCOATED ............ O139
1656509 ..... 410308003CT TICN-CT ............... O139
1656510 ..... 410310004.. UNCOATED ............ O139
1656511 ..... 410312005.. UNCOATED ............ O139
1656512 ..... 410314014.. UNCOATED ............ O139
1656513 ..... 410316006.. UNCOATED ............ O139
1656514 ..... 410318018.. UNCOATED ............ O139
1656515 ..... 410320007.. UNCOATED ............ O139
1656750 ..... 460303002RT TIALN-RT ............... O91
1656758 ..... 460304002RT TIALN-RT ............... O91
1656765 ..... 460305002RT TIALN-RT ............... O91
1656770 ..... 460306002.. UNCOATED .............. O91
1656773 ..... 460306002RT TIALN-RT ............... O91
1656781 ..... 460308003RT TIALN-RT ............... O91
1656788 ..... 460310004.. UNCOATED .............. O91
1656791 ..... 460310004RT TIALN-RT ............... O91
1656799 ..... 460312005RT TIALN-RT ............... O91
1656807 ..... 460316006RT TIALN-RT ............... O91
1656815 ..... 460320007RT TIALN-RT ............... O91
1656841 ..... 463200400.. UNCOATED ............ O117
1656844 ..... 463200500.. UNCOATED ............ O117
1656849 ..... 463200600.. UNCOATED ............ O117
1656853 ..... 463200800.. UNCOATED ............ O117
1656858 ..... 463201000.. UNCOATED ............ O117
1656863 ..... 463201500.. UNCOATED ............ O117
1656867 ..... 463202000.. UNCOATED ............ O117
1656873 ..... 463300400.. UNCOATED ............ O118
1656875 ..... 463300400RT TIALN-RT ............. O118
1656878 ..... 463300500.. UNCOATED ............ O118
1656880 ..... 463300500RT TIALN-RT ............. O118
1656883 ..... 463300600.. UNCOATED ............ O118
1656885 ..... 463300600RT TIALN-RT ............. O118
1656888 ..... 463300800.. UNCOATED ............ O118
1656890 ..... 463300800RT TIALN-RT ............. O118
1656893 ..... 463301000.. UNCOATED ............ O118
1656895 ..... 463301000RT TIALN-RT ............. O118
1656898 ..... 463301200.. UNCOATED ............ O118
1656900 ..... 463301200RT TIALN-RT ............. O118
1656901 ..... 463301500.. UNCOATED ............ O118
1656903 ..... 463301500RT TIALN-RT ............. O118
1656906 ..... 463301800.. UNCOATED ............ O118
1656908 ..... 463301800RT TIALN-RT ............. O118
1656909 ..... 463302000.. UNCOATED ............ O118
1656910 ..... 463302000RT TIALN-RT ............. O118
1656913 ..... 463302500RT TIALN-RT ............. O118
1656916 ..... 463303000RT TIALN-RT ............. O118
1656950 ..... 465101000.. UNCOATED ............ O119
1656951 ..... 465101000CT TICN-CT ............... O119
1656952 ..... 465101200.. UNCOATED ............ O119
1656953 ..... 465101200CT TICN-CT ............... O119
1656954 ..... 465101200RT TIALN-RT ............. O119
1656955 ..... 465101500.. UNCOATED ............ O119
1656956 ..... 465101500CT TICN-CT ............... O119
1656957 ..... 465101500RT TIALN-RT ............. O119
1656959 ..... 465101800CT TICN-CT ............... O119
1656960 ..... 465101800RT TIALN-RT ............. O119
1656971 ..... 465102000.. UNCOATED ............ O119
1656972 ..... 465102000CT TICN-CT ............... O119
1656997 ..... 490604002CW TICN-CW .............. O66
1657000 ..... 490604002LW TIALN-LW .............. O66
1657001 ..... 490604002RT TIALN-RT ............... O66
1657002 ..... 490604002RW TIALN-RW............. O66
1657007 ..... 490605002CW TICN-CW .............. O66
1657008 ..... 490605002LW TIALN-LW .............. O66
1657009 ..... 490605002RT TIALN-RT ............... O66
1657010 ..... 490605002RW TIALN-RW............. O66
1657016 ..... 490606002CW TICN-CW .............. O66
1657017 ..... 490606002LW TIALN-LW .............. O66
1657018 ..... 490606002RT TIALN-RT ............... O66
1657019 ..... 490606002RW TIALN-RW............. O66
1657023 ..... 490607003CW TICN-CW .............. O66
1657024 ..... 490607003LW TIALN-LW .............. O66
1657025 ..... 490607003RW TIALN-RW............. O66
1657031 ..... 490608003CW TICN-CW .............. O66
1657032 ..... 490608003LW TIALN-LW .............. O66
1657033 ..... 490608003RT TIALN-RT ............... O66
1657034 ..... 490608003RW TIALN-RW............. O66
1657039 ..... 490609004CW TICN-CW .............. O66
1657040 ..... 490609004LW TIALN-LW .............. O66
1657041 ..... 490609004RW TIALN-RW............. O66
1657048 ..... 490610004CW TICN-CW .............. O66
1657049 ..... 490610004LW TIALN-LW .............. O66
1657050 ..... 490610004RT TIALN-RT ............... O66
1657051 ..... 490610004RW TIALN-RW............. O66
1657055 ..... 490611005CW TICN-CW .............. O66
1657056 ..... 490611005RW TIALN-RW............. O66
1657061 ..... 490612005CW TICN-CW .............. O66
1657062 ..... 490612005LW TIALN-LW .............. O66
1657063 ..... 490612005RT TIALN-RT ............... O66
1657064 ..... 490612005RW TIALN-RW............. O66
1657068 ..... 490613014CW TICN-CW .............. O66
1657069 ..... 490613014RW TIALN-RW............. O66
1657083 ..... 490614014LW TIALN-LW .............. O66
1657084 ..... 490614014RT TIALN-RT ............... O66
1657085 ..... 490614014RW TIALN-RW............. O66
1657094 ..... 490616006CW TICN-CW .............. O66
1657095 ..... 490616006LW TIALN-LW .............. O66
1657096 ..... 490616006RT TIALN-RT ............... O66
1657097 ..... 490616006RW TIALN-RW............. O66
1657102 ..... 490618018CW TICN-CW .............. O66
1657103 ..... 490618018LW TIALN-LW .............. O66
1657104 ..... 490618018RT TIALN-RT ............... O66
1657105 ..... 490618018RW TIALN-RW............. O66
1657110 ..... 490620007CW TICN-CW .............. O66
1657111 ..... 490620007LW TIALN-LW .............. O66
1657112 ..... 490620007RT TIALN-RT ............... O66
1657113 ..... 490620007RW TIALN-RW............. O66
1657118 ..... 490625008CW TICN-CW .............. O66
1657119 ..... 490625008LW TIALN-LW .............. O66
1657120 ..... 490625008RT TIALN-RT ............... O66
1657121 ..... 490625008RW TIALN-RW............. O66
1657125 ..... 490906002.. UNCOATED ............ O140
1657126 ..... 490906002WW UNCOATEDWW
........................................................................O140
1657127 ..... 490908003.. UNCOATED ............ O140
1657128 ..... 490908003WW UNCOATEDWW
........................................................................O140
1657129 ..... 490910004.. UNCOATED ............ O140
1657131 ..... 490910004WW UNCOATEDWW
........................................................................O140
1657132 ..... 490912005.. UNCOATED ............ O140
1657134 ..... 490912005WW UNCOATEDWW
........................................................................O140
1657136 ..... 490914014.. UNCOATED ............ O140
1657137 ..... 490914014WW UNCOATEDWW
........................................................................O140
1657138 ..... 490916006.. UNCOATED ............ O140
1657140 ..... 490916006WW UNCOATEDWW
........................................................................O140
1657142 ..... 490918018.. UNCOATED ............ O140
1657143 ..... 490918018WW UNCOATEDWW
........................................................................O140
1657144 ..... 490920007.. UNCOATED ............ O140
1657145 ..... 490920007WW UNCOATEDWW
........................................................................O140
1657146 ..... 490925008.. UNCOATED ............ O140
1657148 ..... 490925008WW UNCOATEDWW
........................................................................O140
1657191 ..... 496605002CW TICN-CW .............. O67
1657192 ..... 496605002LW TIALN-LW .............. O67
1657193 ..... 496605002RW TIALN-RW............. O67
1657196 ..... 496606002CW TICN-CW .............. O67
1657197 ..... 496606002LW TIALN-LW .............. O67
1657198 ..... 496606002RW TIALN-RW............. O67
1657201 ..... 496608003CW TICN-CW .............. O67
1657202 ..... 496608003LW TIALN-LW .............. O67
1657203 ..... 496608003RW TIALN-RW............. O67
1657206 ..... 496610004CW TICN-CW .............. O67
1657207 ..... 496610004LW TIALN-LW .............. O67
1657208 ..... 496610004RW TIALN-RW............. O67
1657211 ..... 496612005CW TICN-CW .............. O67
1657212 ..... 496612005LW TIALN-LW .............. O67
1657213 ..... 496612005RW TIALN-RW............. O67
1657217 ..... 496614014LW TIALN-LW .............. O67
1657218 ..... 496614014RW TIALN-RW............. O67
1657221 ..... 496616006CW TICN-CW .............. O67
1657222 ..... 496616006LW TIALN-LW .............. O67
1657223 ..... 496616006RW TIALN-RW............. O67
1657227 ..... 496618018CW TICN-CW .............. O67
1657232 ..... 496620007CW TICN-CW .............. O67
1657234 ..... 496620007RW TIALN-RW............. O67
1657237 ..... 496625008CW TICN-CW .............. O67
1657239 ..... 496625008RW TIALN-RW............. O67
1657259 ..... 49H608003LW TIALN-LW .............. O55
1657260 ..... 49H608003RW TIALN-RW ............ O55
1657263 ..... 49H610004LW TIALN-LW .............. O55
1657264 ..... 49H610004RW TIALN-RW ............ O55
1657268 ..... 49H612005RW TIALN-RW ............ O55
1657273 ..... 49H616006LW TIALN-LW .............. O55
1657274 ..... 49H616006RW TIALN-RW ............ O55
1657277 ..... 49H618018LW TIALN-LW .............. O55
1657278 ..... 49H618018RW TIALN-RW ............ O55
1657281 ..... 49H620007LW TIALN-LW .............. O55
1657282 ..... 49H620007RW TIALN-RW ............ O55
1660373 ..... 6N0606002LW ............................... Q5
1660389 ..... 6N0608004LW ............................... Q5
1660397 ..... 6N0609004LW ............................... Q5
1660405 ..... 6N0610004LW ............................... Q5
1660413 ..... 6N0611005LW ............................... Q5
1660421 ..... 6N0612005LW ............................... Q5
1660437 ..... 6N0614005LW ............................... Q5
1660453 ..... 6N0616006LW ............................... Q5
1660471 ..... 6N0618006LW ............................... Q5
1660479 ..... 6N0620007LW ............................... Q5
1660487 ..... 6N0622007LW ............................... Q5
1660497 ..... 6N0625008LW ............................... Q5
Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 3 11/2/15 10:33 AM
LViWID M 16 I d Z002 Z145 M i REBRAND O b 28 2015 3 09 PM
Z4 widia.com
Index by Order Number
Order No. Catalogue No. Page(s)
1660507 ..... 6N0630008LW ............................... Q5
1660596 ..... 6N7006002LW ............................... Q6
1660598 ..... 6N7008004LW ............................... Q6
1660600 ..... 6N7010004LW ............................... Q6
1660602 ..... 6N7012005LW ............................... Q6
1660604 ..... 6N7014005LW ............................... Q6
1660606 ..... 6N7016006LW ............................... Q6
1660608 ..... 6N7018006LW ............................... Q6
1660610 ..... 6N7020007LW ............................... Q6
1660612 ..... 6N7025008LW ............................... Q6
1660614 ..... 6N7032009LW ............................... Q6
1660617 ..... 6NL610004LW ................................ Q7
1660623 ..... 6NL612005LW ................................ Q7
1660629 ..... 6NL616006LW ................................ Q7
1660635 ..... 6NL620007LW ................................ Q7
1660640 ..... 6NL625008LW ................................ Q7
1661526 ..... D50203002.. UNCOATED ............ O134
1661530 ..... D50204002.. UNCOATED ............ O134
1661534 ..... D50205002.. UNCOATED ............ O134
1661538 ..... D50206002.. UNCOATED ............ O134
1661540 ..... D50206002RT TIALN-RT .............O134
1661543 ..... D50208003.. UNCOATED ............ O134
1661547 ..... D50210004.. UNCOATED ............ O134
1661551 ..... D50212005.. UNCOATED ............ O134
1661555 ..... D50214014.. UNCOATED ............ O134
1661560 ..... D50216006.. UNCOATED ............ O134
1661569 ..... D50220007.. UNCOATED ............ O134
1661573 ..... D50302002CW TICN-CW .............. O85
1661574 ..... D50302002RW TIALN-RW ............ O85
1661576 ..... D50302002WW UNCOATEDWW ... O85
1661577 ..... D50303002CW TICN-CW .............. O85
1661578 ..... D50303002RW TIALN-RW ............ O85
1661580 ..... D50303002WW UNCOATEDWW ... O85
1661582 ..... D50304002CW TICN-CW .............. O85
1661583 ..... D50304002RW TIALN-RW ............ O85
1661585 ..... D50304002WW UNCOATEDWW ... O85
1661587 ..... D50305002CW TICN-CW .............. O85
1661588 ..... D50305002RW TIALN-RW ............ O85
1661590 ..... D50305002WW UNCOATEDWW ... O85
1661592 ..... D50306002CW TICN-CW .............. O85
1661593 ..... D50306002RW TIALN-RW ............ O85
1661595 ..... D50306002WW UNCOATEDWW ... O85
1661601 ..... D50308003CW TICN-CW .............. O85
1661603 ..... D50308003RW TIALN-RW ............ O85
1661605 ..... D50308003WW UNCOATEDWW ... O85
1661611 ..... D50310004CW TICN-CW .............. O85
1661612 ..... D50310004RW TIALN-RW ............ O85
1661614 ..... D50310004WW UNCOATEDWW ... O85
1661617 ..... D50312005RW TIALN-RW ............ O85
1661619 ..... D50312005WW UNCOATEDWW ... O85
1661622 ..... D50314014RW TIALN-RW ............ O85
1661627 ..... D50316006RW TIALN-RW ............ O85
1661629 ..... D50316006WW UNCOATEDWW ... O85
1661636 ..... D50320007RW TIALN-RW ............ O85
1661680 ..... D51303002RW TIALN-RW ............ O85
1661682 ..... D51303002WW UNCOATEDWW ... O85
1661684 ..... D51304002RW TIALN-RW ............ O85
1661686 ..... D51304002WW UNCOATEDWW ... O85
1661688 ..... D51305002RW TIALN-RW ............ O85
1661690 ..... D51305002WW UNCOATEDWW ... O85
1661692 ..... D51306002RW TIALN-RW ............ O85
1661694 ..... D51306002WW UNCOATEDWW ... O85
1661701 ..... D51308003RW TIALN-RW ............ O85
1661703 ..... D51308003WW UNCOATEDWW ... O85
1661710 ..... D51310004RW TIALN-RW ............ O85
1661712 ..... D51310004WW UNCOATEDWW ... O85
1661715 ..... D51312005RW TIALN-RW ............ O85
1661717 ..... D51312005WW UNCOATEDWW ... O85
1661720 ..... D51314014RW TIALN-RW ............ O85
1661725 ..... D51316006RW TIALN-RW ............ O85
1661727 ..... D51316006WW UNCOATEDWW ... O85
1661730 ..... D51318018RW TIALN-RW ............ O85
1661732 ..... D51318018WW UNCOATEDWW ... O85
1661735 ..... D51320007RW TIALN-RW ............ O85
1661737 ..... D51320007WW UNCOATEDWW ... O85
1661856 ..... DC0303002LW TIALN-LW ............. O86
1661858 ..... DC0304002LW TIALN-LW ............. O86
1661860 ..... DC0305002LW TIALN-LW ............. O86
1661862 ..... DC0306002LW TIALN-LW ............. O86
1661866 ..... DC0308003LW TIALN-LW ............. O86
1661868 ..... DC0310004LW TIALN-LW ............. O86
1661870 ..... DC0312005LW TIALN-LW ............. O86
1661872 ..... DC0314014LW TIALN-LW ............. O86
1661874 ..... DC0316006LW TIALN-LW ............. O86
1661876 ..... DC0318018LW TIALN-LW ............. O86
1661878 ..... DC0320007LW TIALN-LW ............. O86
1716039 ..... 6N7020007LT ................................. Q6
1717017 ..... 6N7016006LT ................................. Q6
1724321 ..... 705002001RT TIALN-RT1 ........... O189
1724322 ..... 705002501RT TIALN-RT1 ........... O189
1724323 ..... 705003002RT TIALN-RT1 ........... O189
1724324 ..... 705004002RT TIALN-RT1 ........... O189
1724325 ..... 705005002RT TIALN-RT1 ........... O189
1724326 ..... 705006004RT TIALN-RT1 ........... O189
1724327 ..... 705008004RT TIALN-RT1 ........... O189
1724328 ..... 705010005RT TIALN-RT1 ........... O189
1724329 ..... 705012006RT TIALN-RT1 ........... O189
1724330 ..... 705016006RT TIALN-RT1 ........... O189
1724361 ..... 705020007RT TIALN-RT1 ........... O189
1724463 ..... 750508003LT TIALN-LT1 ............ O180
1724464 ..... 750510004LT TIALN-LT1 ............ O180
1724465 ..... 750512005LT TIALN-LT1 ............ O180
1724466 ..... 750516006LT TIALN-LT1 ............ O181
1724467 ..... 750520007LT TIALN-LT1 ............ O181
1724468 ..... 751506002LT TIALN-LT1 ............ O180
1724469 ..... 751508003LT TIALN-LT1 ............ O180
1724481 ..... 751510004LT TIALN-LT1 ............ O180
1724482 ..... 751512005LT TIALN-LT1 ............ O180
1724483 ..... 751516006LT TIALN-LT1 ............ O181
1724484 ..... 751520007LT TIALN-LT1 ............ O181
1724487 ..... 752506002LT TIALN-LT1 ............ O180
1724489 ..... 752508003LT TIALN-LT1 ............ O180
1724490 ..... 752510004LT TIALN-LT1 ............ O180
1724531 ..... 752512005LT TIALN-LT1 ............ O181
1724533 ..... 752516006LT TIALN-LT1 ............ O181
1724536 ..... 752520007LT TIALN-LT1 ............ O181
1724556 ..... 767005002LT TIALN-LT1 ............ O193
1724558 ..... 767006004LT TIALN-LT1 ............ O193
1724559 ..... 767008004LT TIALN-LT1 ............ O193
1724560 ..... 767010005LT TIALN-LT1 ............ O193
1724582 ..... 767004002LT TIALN-LT1 ............ O193
1724590 ..... 767012006LT TIALN-LT1 ............ O193
1724621 ..... 767016006LT TIALN-LT1 ............ O193
1724622 ..... 767020007LT TIALN-LT1 ............ O193
1731683 ..... 750525008LT TIALN-LT1 ............ O181
1736199 ..... KLS32M ......................M12, M31, M36
1744444 ..... KUAM33 ..................................... C101
1747878 ..... 751525008LT TIALN-LT1 ............ O181
1747931 ..... 752525008LT TIALN-LT1 ............ O181
1752626 ..... 420.200................................J35, M67
1756815 ..... 193.332.................V10, V13, V16, V19
1775478 ..... CM72LP ........................E74, E76, E78,
F24, F27, F31
1775479 ..... CM73LP ........................E74, E76, E78,
F25, F27, F31
1796705 ..... 470.232........................................M67
1796707 ..... 470.233.........................................J35
1806404 ..... 767025008LT TIALN-LT1 ............ O193
1823871 ..... MS1982 ................................V10, V13,
V16, V19
1841781 ..... MS1336 ........................................M31
1841782 ..... MS2038 ...............J24, M6, M31, M36,
M62, M67
1848655 ..... ICSN443 K9 .............................. C8–10
1848805 ..... 754506002LT TIALN-LT1 ............ O180
1852181 ..... CS412 ....................................C40–41
1858322 ..... 497906002.. UNCOATED ............ O141
1858423 ..... 497906002CT TICN-CT ............... O141
1858424 ..... 497908003.. UNCOATED ............ O141
1858425 ..... 497908003CT TICN-CT ............... O141
1858426 ..... 497910004.. UNCOATED ............ O141
1858427 ..... 497910004CT TICN-CT ............... O141
1858428 ..... 497912005.. UNCOATED ............ O141
1858430 ..... 497912005CT TICN-CT ............... O141
1858434 ..... 497916006.. UNCOATED ............ O141
1858437 ..... 497916006CT TICN-CT ............... O141
1858441 ..... 497920007.. UNCOATED ............ O141
1858463 ..... 497920007CT TICN-CT ............... O141
1858465 ..... 497925008.. UNCOATED ............ O141
1858466 ..... 497925008CT TICN-CT ............... O141
1859874 ..... 49G908003CT TICN-CT .............. O143
1859875 ..... 49G910004CT TICN-CT .............. O143
1859876 ..... 49G912005CT TICN-CT ..............O143
1859877 ..... 49G916006CT TICN-CT .............. O143
1859878 ..... 49G920007CT TICN-CT .............. O143
1859879 ..... 49G925008CT TICN-CT .............. O143
1859880 ..... 715002000RT TIALN-RT1 ........... O188
1859881 ..... 715002500RT TIALN-RT1 ........... O188
1859882 ..... 715003000RT TIALN-RT1 ........... O188
1859904 ..... 715004001RT TIALN-RT1 ........... O188
1859906 ..... 715005001RT TIALN-RT1 ........... O188
1859907 ..... 715006002RT TIALN-RT1 ........... O188
1859908 ..... 715008003RT TIALN-RT1 ........... O188
1859909 ..... 715010004RT TIALN-RT1 ........... O188
1859910 ..... 715012005RT TIALN-RT1 ........... O188
1859911 ..... 715016006RT TIALN-RT1 ........... O188
1859912 ..... 715020007RT TIALN-RT1 ........... O188
1860036 ..... 715101000RT TIALN-RT1 ........... O174
1860090 ..... 715102000RT TIALN-RT1 ........... O174
1860103 ..... 715102500RT TIALN-RT1 ........... O174
1860106 ..... 715103000RT TIALN-RT1 ........... O174
1860109 ..... 715104001RT TIALN-RT1 ........... O174
1860111 ..... 715105001RT TIALN-RT1 ........... O174
1860112 ..... 715106002RT TIALN-RT1 ........... O174
1860133 ..... 715108003RT TIALN-RT1 ........... O174
1860134 ..... 715110004RT TIALN-RT1 ........... O174
1860135 ..... 715112005RT TIALN-RT1 ........... O174
1860136 ..... 715116006RT TIALN-RT1 ........... O174
1860137 ..... 715120007RT TIALN-RT1 ........... O174
1860603 ..... 754508003LT TIALN-LT1 ............ O180
1860604 ..... 754510004LT TIALN-LT1 ............ O180
1860605 ..... 754512005LT TIALN-LT1 ............ O180
1860606 ..... 754516006LT TIALN-LT1 ............ O181
1860607 ..... 754520007LT TIALN-LT1 ............ O181
1860608 ..... 754525008LT TIALN-LT1 ............ O181
1860609 ..... 758506002LT TIALN-LT1 ............ O182
1860610 ..... 758506012LT TIALN-LT1 ............ O182
1860611 ..... 758508003LT TIALN-LT1 ............ O182
1860612 ..... 758508013LT TIALN-LT1 ............ O182
1860623 ..... 758510004LT TIALN-LT1 ............ O183
1860624 ..... 758510014LT TIALN-LT1 ............ O183
1860625 ..... 758512005LT TIALN-LT1 ............ O183
1860626 ..... 758512015LT TIALN-LT1 ............ O183
1860627 ..... 758516006LT TIALN-LT1 ............ O183
1860628 ..... 758516016LT TIALN-LT1 ............ O183
1860629 ..... 758520007LT TIALN-LT1 ............ O183
1860630 ..... 758520017LT TIALN-LT1 ............ O183
1860631 ..... 758525008LT TIALN-LT1 ............ O183
1860632 ..... 758525018LT TIALN-LT1 ............ O183
1862105 ..... 759506002LT TIALN-LT1 ............ O182
1862106 ..... 759506012LT TIALN-LT1 ............ O182
1862107 ..... 759508003LT TIALN-LT1 ............ O182
1862108 ..... 759508013LT TIALN-LT1 ............ O182
1862109 ..... 759510004LT TIALN-LT1 ............ O182
1862110 ..... 759510014LT TIALN-LT1 ............ O182
1862111 ..... 759512005LT TIALN-LT1 ............ O183
1862112 ..... 759512015LT TIALN-LT1 ............ O183
1862113 ..... 759516006LT TIALN-LT1 ............ O183
1862114 ..... 759516016LT TIALN-LT1 ............ O183
1862115 ..... 759520007LT TIALN-LT1 ............ O183
1862116 ..... 759520017LT TIALN-LT1 ............ O183
1862117 ..... 759525008LT TIALN-LT1 ............ O183
1862118 ..... 759525018LT TIALN-LT1 ............ O183
1862119 ..... 75N506002LT TIALN-LT1 ............O184
1862120 ..... 75N508003LT TIALN-LT1 ............O184
1862121 ..... 75N510004LT TIALN-LT1 ............O184
1862122 ..... 75N512005LT TIALN-LT1 ............O185
1862123 ..... 75N516006LT TIALN-LT1 ............O185
1862124 ..... 75N520007LT TIALN-LT1 ............O185
1862125 ..... 75N525008LT TIALN-LT1 ............O185
1863407 ..... 552.210........................................ C64
1867212 ..... SSP025016M .............C8–19, C56–59
1867278 ..... KMSP415IP ...................... C8–17, C19,
C56–57, C59
1867314 ..... KMSP515IP ........ C8–10, C12–16, C56
1867321 ..... KLM46L15IP ............................. C8–16
1867333 ..... KLM4615IP ................C8–10, C12–15,
C17, C19
1867338 ..... KLM58L15IP ...............C8–10, C12–15
1867342 ..... KLM5815IP ................................... C16
1872409 ..... ICSN543 K9 .............................. C8–10
1880671 ..... 193.341................................. M46–48
1880754 ..... 193.342.................. M52–55, M59–62
1888504 ..... 193.364................................. M42–43
1888505 ..... 193.343........................ M36, M66–67
1888506 ..... 193.383........................................M67
1896375 ..... 193.338................................. M59–62
1902322 ..... 410303000CT TICN-CT ............... O139
1902489 ..... 49G908003CW TICN-CW ............ O143
1902490 ..... 49G910004CW TICN-CW ............ O143
1902491 ..... 49G912005CW TICN-CW ............ O143
1902492 ..... 49G916006CW TICN-CW ............ O143
1902493 ..... 49G920007CW TICN-CW ............ O143
1902494 ..... 49G925008CW TICN-CW ............ O143
1902576 ..... 410305001CT TICN-CT ............... O139
1902578 ..... 410310004CT TICN-CT ............... O139
1902579 ..... 410312005CT TICN-CT ............... O139
1902593 ..... 410314014CT TICN-CT ............... O139
1902594 ..... 410316006CT TICN-CT ............... O139
1902595 ..... 410318018CT TICN-CT ............... O139
1902596 ..... 410320007CT TICN-CT ............... O139
Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 4 11/2/15 10:33 AM
LViWID M 16 I d Z002 Z145 M i REBRANDO b 28 20153 09PM
Z5
widia.com
Index by Order Number
Order No. Catalogue No. Page(s)
1905810 ..... MS1294 ............................. E126–127,
H72, J8, J24,
M23, M31
1905949 ..... 410305002CT TICN-CT ............... O139
1926120 ..... 7F1-0875A ................................... U30
1926121 ..... 7F2-1375A ................................... U32
1963863 ..... QC21 ............................................ D19
1963864 ..... QC26 ...................................... D18–20
1968092 ..... 490611005LW TIALN-LW .............. O66
1968204 ..... 490613014LW TIALN-LW .............. O66
1968206 ..... 49H614014LW TIALN-LW .............. O55
1977373 ..... M41304 .......................................... R8
1977374 ..... M41396 ........................................ R11
1977378 ..... M41452 ........................................ R13
1977382 ..... M41497 ........................................ R15
1977385 ..... M41474 ........................................ R14
1977415 ..... M41231 .......................................... R6
1977417 ..... M41399 ........................................ R11
1977419 ..... M41503 ........................................ R15
1977421 ..... M41226 .......................................... R6
1977429 ..... M41453 ........................................ R13
1977519 ..... M41229 .......................................... R6
1977546 ..... M41309 .......................................... R8
1977548 ..... M41312 .......................................... R8
1977549 ..... M41316 .......................................... R8
1977555 ..... M41401 ........................................ R11
1977556 ..... M41403 ........................................ R11
1977564 ..... M41501 ........................................ R15
1977567 ..... M41505 ........................................ R15
1977570 ..... M41373 ........................................ R10
1977572 ..... M41477 ........................................ R14
1977573 ..... M41478 ........................................ R14
1977630 ..... M40578 ........................................ R11
1981089 ..... 6N7010004LT ................................. Q6
1981090 ..... 6N7012005LT ................................. Q6
1985751 ..... KLM34L9IP ...............C9, C11, C16–19
1985784 ..... KMSP315IP ..............C9, C11, C16–19,
C56–58
1988432 ..... 7F0-0656T ................................... U29
2002367 ..... 12396202200 W .......................... H52
2002370 ..... 12396202600 W .......................... H52
2002473 ..... RCGT0803M0AL1 HCK10 ........... B156
2002474 ..... RCGT0803M0AL1 HWK10 .......... B156
2002503 ..... VCGT160412AL3 HCK10 ............ B157
2002505 ..... VCGT220530AL3 HCK10 ............ B157
2002506 ..... VCGT220530AL3 HWK15 ........... B157
2003541 ..... 12396203800 W .......................... H53
2003555 ..... 12396943800 W ...........................J48
2003556 ..... 12396953800 W ...........................J44
2003557 ..... 12396954000 W ...........................J44
2003558 ..... 12396204200 W .......................... H53
2003562 ..... 12396944200 W ...........................J48
2003573 ..... 12396954200 W ...........................J44
2003574 ..... 12396954400 W ...........................J44
2003575 ..... 12396204600 W .......................... H53
2003579 ..... 12396944600 W ...........................J48
2003580 ..... 12396954600 W ...........................J44
2003581 ..... 12396954800 W ...........................J44
2003582 ..... 12396205000 W .......................... H53
2003593 ..... 12396215000 W .......................... H58
2003595 ..... 12396945000 W ...........................J48
2003596 ..... 12396955000 W ...........................J44
2003597 ..... 12396955200 W ...........................J44
2003598 ..... 12399010200 W ...........................L24
2003602 ..... 12399111400 W ...........................L25
2003679 ..... 12396205400 W .......................... H53
2003682 ..... 12396945400 W ...........................J48
2003693 ..... 12396955400 W ...........................J44
2003694 ..... 12396955600 W ...........................J44
2003695 ..... 12399010400 W ...........................L24
2003696 ..... 12399011600 W ...........................L24
2003697 ..... 12399012800 W ...........................L24
2003700 ..... 12399110400 W ...........................L25
2003701 ..... 12399111600 W ...........................L25
2003702 ..... 12399112800 W ...........................L25
2003780 ..... 12396205800 W .......................... H53
2003793 ..... 12396955800 W ...........................J44
2003794 ..... 12396956000 W ...........................J44
2003796 ..... 12399011800 W ...........................L24
2003797 ..... 12399013000 W ...........................L24
2003800 ..... 12399110600 W ...........................L25
2003801 ..... 12399111800 W ...........................L25
2003802 ..... 12399113000 W ...........................L25
2003879 ..... 12399012000 W ...........................L24
2003880 ..... 12399013200 W ...........................L24
2003881 ..... 12399014400 W ...........................L27
2003882 ..... 12399015600 W ...........................L27
2003897 ..... 12399110800 W ...........................L25
2003898 ..... 12399112000 W ...........................L25
2003899 ..... 12399113200 W ...........................L25
2003900 ..... 12399114400 W ...........................L28
2003901 ..... 12399115600 W ...........................L28
2003993 ..... 12399014600 W ...........................L27
2003994 ..... 12399015800 W ...........................L27
2003997 ..... 12399113400 W ...........................L25
2003998 ..... 12399114600 W ...........................L28
2003999 ..... 12399115800 W ...........................L28
2004081 ..... 12399014800 W ...........................L27
2004082 ..... 12399016000 W ...........................L27
2004095 ..... 12399113600 W ...........................L25
2004096 ..... 12399114800 W ...........................L28
2004097 ..... 12399116000 W ...........................L28
2004133 ..... 12627270700 WG ....................... W54
2004134 ..... 12627270800 WG ....................... W55
2004140 ..... 12627276500 WG ....................... W54
2004141 ..... 12627276800 WG ....................... W55
2004161 ..... 12627277700 WG ....................... W54
2004162 ..... 12627277800 WG ....................... W55
2004177 ..... 12627278700 WG ....................... W54
2004178 ..... 12627278800 WG ....................... W55
2004781 ..... 12627270300 WG ....................... W54
2004782 ..... 12627275300 WG ....................... W54
2005499 ..... 12627010200 WG ....................... W51
2005500 ..... 12600210900 WG ....................... W38
2005542 ..... 12627013200 WG ....................... W51
2005553 ..... 12600213200 WG ....................... W38
2005556 ..... 12600215500 WG ....................... W38
2005558 ..... 12627016200 WG ....................... W51
2005560 ..... 12600217800 WG ....................... W38
2005573 ..... 12627019300 WG ....................... W51
2005574 ..... 12600020000 WG ....................... W40
2005576 ..... 12614020100 WG ....................... W41
2005580 ..... 12625702200 WG ....................... W44
2005581 ..... 12625902200 WG ....................... W45
2005602 ..... 12600027800 WG ....................... W40
2005618 ..... 12625703000 WG ....................... W44
2005619 ..... 12625903000 WG ....................... W45
2005620 ..... 12626003000 WG ....................... W42
2005656 ..... 12600035800 WG ....................... W40
2005673 ..... 12625704000 WG ....................... W44
2005674 ..... 12625804000 WG ....................... W43
2005675 ..... 12625904000 WG ....................... W45
2005676 ..... 12626004000 WG ....................... W42
2005722 ..... 12600043800 WG ....................... W40
2005801 ..... 12625705000 WG ....................... W44
2005802 ..... 12625805100 WG ....................... W43
2005813 ..... 12625905000 WG ....................... W45
2005814 ..... 12626005000 WG ....................... W42
2005938 ..... 12625706700 WG .............. W39, W44
2005939 ..... 12625806800 WG .............. W39, W43
2005940 ..... 12625906700 WG .............. W39, W45
2005941 ..... 12626006700 WG .............. W39, W42
2005954 ..... 12627006200 WG ....................... W51
2006015 ..... 12627008200 WG ....................... W51
2006019 ..... 12600208800 WG ....................... W38
2006041 ..... 12625708986 WG ....................... W44
2006054 ..... 12625908986 WG ....................... W45
2006331 ..... 12748210100 W .................... L24–25
2006332 ..... 12748210300 W .................... L24–25
2006343 ..... 12748210500 W .................... L24–25
2006344 ..... 12748210700 W .................... L27–28
2006345 ..... 12748210900 W .................... L27–28
2006346 ..... M4000CA-RC1606 ....................... H73
2006347 ..... M4000CA-XP16 ............................ H73
2006348 ..... M4000CA-SN12 ........................... H73
2006359 ..... M4000CA-SD1506 ....................... H73
2006360 ..... M4000CA-SN15 ........................... H73
2006361 ..... M4000CA-MDHX10 ...................... H73
2006362 ..... M4000CA-SP12 ............................ H73
2006373 ..... M4000CA-SP1203 ....................... H73
2006374 ..... M4000CA-SE1203 ........................ H73
2006376 ..... M4000CA-SP1504 ....................... H73
2006377 ..... M4000CA-SE1504 ........................ H73
2006379 ..... M4000CA-TP2204 ........................ H73
2006380 ..... 12748210200 W .................... L24–25
2006381 ..... 12748210400 W .................... L24–25
2006382 ..... 12748210600 W .................... L24–25
2006393 ..... 12748210800 W .................... L27–28
2006394 ..... 12748211000 W .................... L27–28
2006396 ..... 12748307600 W .................... L24–25
2006397 ..... 12748307700 W ...... L24–25, L27–28
2006398 ..... 12748307800 W .................... L27–28
2006399 ..... 12748308500 W .......................... H72
2006991 ..... TCGT110204AL1 HWK10............ B157
2007004 ..... TCGT16T308AL1 HWK10 ............ B157
2007105 ..... 12251762000 W .........................E103
2007108 ..... 12251762100 W .........................E103
2007111 ..... 12251763200 W .........................E103
2007124 ..... 12251763300 W .........................E103
2007127 ..... 12251763400 W .........................E103
2007130 ..... 12251764200 W .........................E103
2007133 ..... 12251764300 W .........................E103
2007136 ..... 12251782000 W .........................E102
2007139 ..... 12251782100 W .........................E102
2007142 ..... 12251783200 W .........................E102
2007145 ..... 12251783300 W .........................E102
2007148 ..... 12251784200 W .........................E102
2007151 ..... 12251784300 W .........................E102
2007404 ..... 2ERA60 TN6025 ............................F46
2007414 ..... 12191062086 W .........................E107
2007419 ..... 3ILG60 TN6025..............................F47
2007542 ..... 2ER15ISO TN6025 .........................F48
2007585 ..... 2IR075ISO TN6025 ........................F51
2007613 ..... 2IR10ISO TN6025 ..........................F51
2007622 ..... 2IR125ISO TN6025 ........................F51
2007826 ..... 12251222000 W .........................E104
2007832 ..... 12251762200 W .........................E103
2008113 ..... 12251352000 W .........................E104
2008116 ..... 12251353000 W .........................E104
2008119 ..... 12251354000 W .........................E104
2008122 ..... 12251355000 W .........................E104
2008135 ..... 12251356000 W .........................E104
2008138 ..... 12251358000 W .........................E104
2008141 ..... 12251213200 W .........................E104
2008144 ..... 12250110400 W .........................E106
2008147 ..... 12250110300 W .........................E106
2008150 ..... 12251783700 W .........................E102
2008153 ..... 12251783600 W .........................E102
2008156 ..... 12251223200 W .........................E104
2008159 ..... 12251233200 W .........................E104
2008187 ..... 3EL10ISO TN6025 .........................F50
2008190 ..... 3ELG55 TN6025 ............................F60
2008256 ..... 3ER30ISO TN6025 .........................F48
2008275 ..... 3ILAG60 TN6025 ...........................F47
2008329 ..... 12749723200 W .................... L27–28
2008424 ..... SCMW09T308 SP0G00 ................. B70
2008521 ..... 12250110900 W .........................E106
2008876 ..... 123567320 THM ...........................E97
2008931 ..... 123567330 THM ...........................E97
2009080 ..... 123567340 THM ...........................E97
2009385 ..... 123567360 THM ...........................E97
2009482 ..... 123567380 TN8025 ......................E97
2009504 ..... 123567380 THM ...........................E97
2009562 ..... 123568080 TTM ..........................E105
2009587 ..... AL163R W ......................................F70
2009591 ..... AL203R W ......................................F70
2009594 ..... AL253R W ......................................F70
2009597 ..... AL254R W ......................................F70
2009600 ..... AL323R W ......................................F70
2009603 ..... AL324R W ......................................F70
2009609 ..... AVR203R W ...................................F74
2009612 ..... AVR253R W ...................................F74
2009625 ..... AVR254R W ...................................F74
2009628 ..... AVR25D3R W .................................F74
2009631 ..... AVR25D4R W .................................F74
2009634 ..... AVR324R W ...................................F74
2009637 ..... AVR325R W ...................................F74
2009640 ..... AVR32D3R W .................................F74
2009643 ..... AVR403R W ...................................F74
2009646 ..... AVR405R W ...................................F74
2009649 ..... AVR505R W ...................................F74
2009671 ..... 123506599 THM ...........................L19
2009686 ..... 123506600 THM ...........................L20
2009711 ..... 123506601 THM ...........................L19
2010027 ..... CCMT12040441 THM ................... B31
2010047 ..... E06JSCFPR04 WG ........................ C67
2010061 ..... CCMT12040841 THM ................... B31
2010068 ..... E08KSCLCR06 WG ........................ C68
2010090 ..... E10MSTFCL11 WG ........................ C77
2010111 ..... E12QSDQCR07 WG ....................... C72
2010120 ..... E12QSTFCL11 WG ........................ C77
2010139 ..... E16RSCLCR09 WG ........................ C68
2010148 ..... E16RSDQCL07 WG ....................... C72
2010157 ..... E16RSDUCR07 W .......................... C74
2010174 ..... E16RSTFCR16 WG ........................ C77
2010175 ..... CNMG12040422 TTI15 ................. B37
2010184 ..... E20SSCLCR09T3 WG .................... C68
2010193 ..... E20SSDUCL11 W .......................... C74
2010215 ..... E25TSCLCL09 WG ........................ C68
2010224 ..... E25TSCLCR09T3 WG .................... C68
2010233 ..... E25TSTFCL16 WG ......................... C77
2010882 ..... CNMM19061665 TN8025............. B44
2010919 ..... CNMM190616SR TN7015 ............ B44
2011507 ..... DCMX11T302R18 THM ................. B50
Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 5 11/2/15 10:33 AM
LViWID M 16 I d Z002 Z145 M i REBRAND O b 28 2015 3 09 PM
Z6 widia.com
Index by Order Number
Order No. Catalogue No. Page(s)
2012231 ..... LNUX400924EN95 TTR ................. B64
2012307 ..... NVR163R W ...................................F74
2012325 ..... OVR122R W ...................................F75
2012416 ..... RCMT1606M0TX TN2510 .............M97
2012418 ..... RCMT1606M0TX TN7525 .............M97
2012426 ..... RDHT0802M0T TN7525 ................M75
2012446 ..... RDHT1003M0T TN7525 ................M80
2012462 ..... RDHT1605M0TX TTI25..................M92
2012480 ..... RDHW1003M0MH TN2510 ...........M80
2012484 ..... RDHW1204M0MH TN2510 ...........M86
2012518 ..... RDMT0802M0T TN7525 ...............M75
2012534 ..... RDMT1003M0T TN7525 ...............M81
2012564 ..... RDMW0802M0 TN2510 ................M76
2012566 ..... RDMW0802M0 THM .....................M76
2012572 ..... RDMW1003M0 TN2510 ................M81
2012578 ..... RDMW1003M0T TTI25 ..................M81
2012594 ..... RDMW1204M0TX TN2510 ............M87
2012610 ..... M270BR10 TN2510 ................... M109
2012612 ..... M270BR10 TN7525 ................... M109
2012624 ..... M270BR10 TN7535 ................... M109
2012630 ..... M270BR12 TN2510 ................... M109
2012632 ..... M270BR12 TN7525 ................... M109
2012634 ..... M270BR12 TN7535 ................... M109
2012640 ..... M270BR16 TN2510 ................... M109
2012642 ..... M270BR16 TN7525 ................... M109
2012658 ..... M270BR20 TN2510 ................... M109
2012660 ..... M270BR20 TN7525 ................... M109
2012662 ..... M270BR20 TN7535 ................... M109
2012668 ..... M270BR25 TN2510 ................... M109
2012670 ..... M270BR25 TN7525 ................... M109
2012672 ..... M270BR25 TN7535 ................... M109
2012688 ..... M270BR32 TN2510 ................... M109
2012690 ..... M270BR32 TN7525 ................... M109
2012692 ..... M270BR32 TN7535 ................... M109
2012698 ..... M270BF10 TN2505 ................... M108
2012700 ..... M270BF10 TN2510 ................... M108
2012718 ..... M270BF12 TN2505 ................... M108
2012720 ..... M270BF12 TN2510 ................... M108
2012728 ..... M270BF16 TN2505 ................... M108
2012730 ..... M270BF16 TN2510 ................... M108
2012748 ..... M270BF20 TN2505 ................... M108
2012750 ..... M270BF20 TN2510 ................... M108
2012758 ..... M270BF25 TN2505 ................... M108
2012760 ..... M270BF25 TN2510 ................... M108
2012778 ..... M270BF32 TN2505 ................... M108
2012780 ..... M270BF32 TN2510 ................... M108
2013602 ..... SNMM190616SR TN7015 ............. B76
2013677 ..... SNMT1205AZR31 TN2510 ............ H55
2014041 ..... TCAX1103ZZ18 TTM08..................L12
2014054 ..... TCAX1103ZZ26 THM .....................L12
2014056 ..... TCAX1103ZZ26 TTM ......................L12
2014066 ..... SPMW120408 THM ..........................I9
2014082 ..... TCMT1102042 TTI15 .................... B81
2014152 ..... TNAX1604ZZ26 THM .....................L12
2014164 ..... TNAX1604ZZ26 TTM08 .................L12
2014166 ..... TNAX1604ZZ31 THM .....................L12
2014168 ..... TNAX1604ZZ31 TTM08 .................L12
2014170 ..... TNAX1604ZZ41 THM .....................L12
2014172 ..... TNAX1604ZZ41 TTM......................L12
2014176 ..... TNAX2206ZZ41 TTM......................L13
2014635 ..... TNMM16041265 TN8025 ............. B90
2014695 ..... TNMM22040865 TN7015 ............. B90
2014740 ..... TNMM22041665 TN8025 ............. B90
2014890 ..... DCGT11T304AL3 HCK10 ............ B156
2015018 ..... 12147548500 W ...........................L18
2015081 ..... TPGA110204 THM ........................ B91
2015242 ..... XNKT1205AZER11 TN7525 ........... H55
2015244 ..... XNKT1205AZER11 TTI25............... H55
2015246 ..... XNKT1205AZER11 THM ................ H55
2015264 ..... XNKT1205AZTR12 TN7525 ........... H55
2015266 ..... XNKT1205AZTR12 TTI25............... H55
2015526 ..... 12748551100 W ....................L24–25,
L27–28
2015527 ..... 12748551200 W ....................L24–25,
L27–28
2015754 ..... 12251763000 W .........................E103
2015782 ..... 12251765500 W .........................E103
2015792 ..... 12251768400 W .........................E103
2015814 ..... 12251784400 W .........................E102
2015816 ..... 12251784500 W .........................E102
2015839 ..... 12251786500 W .........................E102
2015842 ..... 12251788500 W .........................E102
2016118 ..... AL404R W ......................................F70
2016122 ..... AL405R W ......................................F70
2016502 ..... 12299510400 W ...........................L18
2016514 ..... 12299515500 W ...........................L18
2016516 ..... 12299515600 W ...........................L18
2016518 ..... 12299515700 W ...........................L18
2016520 ..... 12299515800 W ...........................L18
2016524 ..... 12299520400 W ...........................L18
2016526 ..... 12299525500 W ...........................L18
2016528 ..... 12299525600 W ...........................L18
2016530 ..... 12299525700 W ...........................L18
2016532 ..... 12299525800 W ...........................L18
2016544 ..... 12299526000 W ...........................L18
2016547 ..... 12299530400 W ...........................L18
2016551 ..... 12299535600 W ...........................L18
2016555 ..... 12299535800 W ...........................L18
2016562 ..... 12299546000 W ...........................L18
2017822 ..... 123567330 TN8025 ......................E97
2017912 ..... 123567730 TN8025 ....................E100
2017973 ..... 123568080 THM .........................E105
2017976 ..... 123568100 THM .........................E105
2017980 ..... 123568120 THM .........................E105
2017993 ..... 123568121 THM .........................E105
2017996 ..... 123568141 THM .........................E105
2018194 ..... 12748610000 W ... V10, V13, V16, V19
2018214 ..... 3ERA60 TN6025 ............................F46
2018222 ..... 3ERG60 TN6025 ............................F46
2018236 ..... 3ELG60 TN6025 ............................F46
2018246 ..... 3ERAG60 TN6025 ..........................F46
2018252 ..... 4ERN60 TN6025 ............................F46
2018256 ..... 5ERQ60 TN6025 ............................F46
2018262 ..... 2IRA60 TN6025 .............................F47
2018265 ..... 12148001300 W ..........................M74
2018272 ..... 3IRA60 TN6025 .............................F47
2018278 ..... 3IRG60 TN6025 .............................F47
2018281 ..... 12148005800 W ......... C67, C70, W51
2018284 ..... 3IRAG60 TN6025 ...........................F47
2018290 ..... 4IRN60 TN6025 .............................F47
2018294 ..... 12148007200 W ...... H52–53, H58, I7,
L4, L11, M90–91,
M96, W42, W45
2018295 ..... 5IRQ60 TN6025 .............................F47
2018296 ..... MS2260 ........................C68, J48, M36
2018301 ..... 3ERA55 TN6025 ............................F60
2018308 ..... 3ERG55 TN6025 ............................F60
2018314 ..... 3ERAG55 TN6025 ..........................F60
2018320 ..... 4ERN55 TN6025 ............................F60
2018328 ..... 2IRA55 TN6025 .............................F61
2018334 ..... 3IRA55 TN6025 .............................F61
2018340 ..... 3IRG55 TN6025 .............................F61
2018346 ..... 3IRAG55 TN6025 ...........................F61
2018348 ..... 3ILAG55 TN6025 ...........................F61
2018354 ..... 4IRN55 TN6025 .............................F61
2018377 ..... 3ER05ISO TN6025 .........................F48
2018389 ..... 3ER07ISO TN6025 .........................F48
2018395 ..... 3ER075ISO TN6025 .......................F48
2018403 ..... 3ER08ISO TN6025 .........................F48
2018411 ..... 3ER10ISO TN6025 .........................F48
2018412 ..... 12148021100 W .........................E107
2018421 ..... 3ER125ISO TN6025 .......................F48
2018429 ..... 3ER15ISO TN6025 .........................F48
2018435 ..... 3EL15ISO TN6025 .........................F50
2018445 ..... 3ER175ISO TN6025 .......................F48
2018447 ..... 3EL175ISO TN6025 .......................F50
2018460 ..... 3ER20ISO TN6025 .........................F48
2018466 ..... 3EL20ISO TN6025 .........................F50
2018472 ..... 3ER25ISO TN6025 .........................F48
2018489 ..... 3EL30ISO TN6025 .........................F50
2018495 ..... 4ER35ISO TN6025 .........................F48
2018496 ..... 12148032586 W .........................E107
2018501 ..... 4ER40ISO TN6025 .........................F48
2018508 ..... 4ER45ISO TN6025 .........................F48
2018517 ..... 4ER50ISO TN6025 .........................F49
2018522 ..... 5ER55ISO TN6025 .........................F49
2018527 ..... 12148036300 W .................. C66, C68
2018528 ..... 5ER60ISO TN6025 .........................F49
2018533 ..... 12148036700 W ................... M78–79
2018539 ..... 12148037700 W .....................J44, K4
2018549 ..... 12148038800 W ......... C44, C68, C72,
C74, C77, H44–45,
L4, M84–85, W42–43,
W54–55
2018550 ..... 2IR15ISO TN6025 ..........................F51
2018557 ..... 2IL15ISO TN6025 ...........................F52
2018564 ..... 2IR175ISO TN6025 ........................F51
2018582 ..... 3IR05ISO TN6025 ..........................F51
2018596 ..... 3IR075ISO TN6025 ........................F51
2018598 ..... 3IL075ISO TN6025.........................F53
2018612 ..... 3IR10ISO TN6025 ..........................F51
2018626 ..... 3IR125ISO TN6025 ........................F51
2018636 ..... 3IR15ISO TN6025 ..........................F51
2018642 ..... 3IL15ISO TN6025 ...........................F53
2018649 ..... 12148060600 W .........................E106
2018651 ..... 12148060700 W .........................E106
2018652 ..... 3IR175ISO TN6025 ........................F51
2018653 ..... 12148060800 W .........................E106
2018663 ..... 3IR20ISO TN6025 ..........................F51
2018667 ..... 3IL20ISO TN6025 ...........................F53
2018673 ..... 12148067200 W ..............L4, L10–11,
L24–25, W42
2018674 ..... 3IR25ISO TN6025 ..........................F51
2018678 ..... 3IL25ISO TN6025 ...........................F53
2018679 ..... 12148068700 ....... C68, C74, C77, L4,
W43, W45–49, W51,
W54–55
2018684 ..... 3IR30ISO TN6025 ..........................F51
2018688 ..... 3IL30ISO TN6025 ...........................F53
2018695 ..... 4IR35ISO TN6025 ..........................F51
2018702 ..... 4IR40ISO TN6025 ..........................F52
2018703 ..... 12148080000 W .......... C72, C74, L10
2018708 ..... 4IR45ISO TN6025 ..........................F52
2018714 ..... 4IR50ISO TN6025 ..........................F52
2018720 ..... 5IR60ISO TN6025 ..........................F52
2018736 ..... 3ER48UN TN6025 ..........................F54
2018744 ..... 3ER40UN TN6025 ..........................F54
2018748 ..... 3ER36UN TN6025 ..........................F54
2018752 ..... 3ER32UN TN6025 ..........................F54
2018756 ..... 3ER28UN TN6025 ..........................F54
2018760 ..... 3ER27UN TN6025 ..........................F54
2018766 ..... 3ER24UN TN6025 ..........................F54
2018772 ..... 3ER20UN TN6025 ..........................F54
2018778 ..... 3ER18UN TN6025 ..........................F54
2018782 ..... 3ER16UN TN6025 ..........................F54
2018790 ..... 3ER14UN TN6025 ..........................F54
2018796 ..... 3ER13UN TN6025 ..........................F55
2018802 ..... 3ER12UN TN6025 ..........................F55
2018805 ..... 12148094300 W .........................E106
2018807 ..... 12148094400 W .........................E106
2018808 ..... 3ER11UN TN6025 ..........................F55
2018809 ..... 12148094500 W .........................E106
2018811 ..... 12148094600 W .........................E106
2018813 ..... 12148094700 W .........................E106
2018814 ..... 3ER10UN TN6025 ..........................F55
2018817 ..... 12148095100 W ..........................I4–6
2018824 ..... 3ER8UN TN6025 ............................F55
2018860 ..... 2IR32UN TN6025 ...........................F56
2018876 ..... 2IR20UN TN6025 ...........................F56
2018882 ..... 2IR18UN TN6025 ...........................F56
2018886 ..... 2IR16UN TN6025 ...........................F56
2018918 ..... 3IR32UN TN6025 ...........................F56
2018922 ..... 3IR28UN TN6025 ...........................F56
2018932 ..... 3IR24UN TN6025 ...........................F56
2018938 ..... 3IR20UN TN6025 ...........................F56
2018944 ..... 3IR18UN TN6025 ...........................F56
2018950 ..... 3IR16UN TN6025 ...........................F56
2018955 ..... 3IR14UN TN6025 ...........................F56
2018966 ..... 3IR12UN TN6025 ...........................F57
2018979 ..... 3IR10UN TN6025 ...........................F57
2018990 ..... 3IR8UN TN6025 .............................F57
2019023 ..... 3ER32W TN6025 ...........................F62
2019029 ..... 3ER28W TN6025 ...........................F62
2019055 ..... 3ER19W TN6025 ...........................F62
2019061 ..... 3ER16W TN6025 ...........................F62
2019071 ..... 3ER14W TN6025 ...........................F62
2019077 ..... 3ER12W TN6025 ...........................F62
2019083 ..... 3ER11W TN6025 ...........................F62
2019089 ..... 3ER10W TN6025 ...........................F62
2019101 ..... 3ER8W TN6025 .............................F62
2019104 ..... 12148574100 W ..........E106, L24–25,
L27–28
2019118 ..... 12148574900 W .........................E106
2019121 ..... 2IR19W TN6025 ............................F63
2019136 ..... 2IR14W TN6025 ............................F63
2019146 ..... 12148580411 W .........................E107
2019148 ..... 12148580511PKG W ...................E107
2019150 ..... 12148580611 W .........................E107
2019171 ..... 12148582511 W .........................E107
2019172 ..... 3IR19W TN6025 ............................F63
2019178 ..... 3IR16W TN6025 ............................F63
2019189 ..... 3IR14W TN6025 ............................F63
2019195 ..... 3IR12W TN6025 ............................F63
2019202 ..... 12148586000 W .........................E107
2019205 ..... 3IR11W TN6025 ............................F63
2019215 ..... 12148586800 W .........................E107
2019217 ..... 12148586900 W .........................E107
2019224 ..... 3IR8W TN6025 ..............................F63
2019234 ..... 4IR6W TN6025 ..............................F63
2019235 ..... 12148588211 W .........................E107
2019239 ..... 12148588411 W .........................E107
2019249 ..... 12148589200 W .........................E107
2019251 ..... 12148589300 W .........................E107
2019264 ..... 12148591011 W .........................E107
Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 6 11/2/15 10:33 AM
LViWID M 16 I d Z002 Z145 M i REBRANDO b 28 20153 09PM
Z7
widia.com
Index by Order Number
Order No. Catalogue No. Page(s)
2019266 ..... 12148591111 W .........................E107
2019278 ..... 3ER18NPT TN6025 ........................F58
2019287 ..... 12148596200 W ................ E102–103
2019288 ..... 3ER14NPT TN6025 ........................F58
2019298 ..... 3ER115NPT TN6025 ......................F58
2019305 ..... 3ER8NPT TN6025 ..........................F58
2019323 ..... 3IR18NPT TN6025 .........................F59
2019329 ..... 3IR14NPT TN6025 .........................F59
2019335 ..... 3IR115NPT TN6025 .......................F59
2019339 ..... 3IR8NPT TN6025 ...........................F59
2019347 ..... 3ER8RD TN6025 ............................F65
2019359 ..... 4ER6RD TN6025 ............................F65
2019375 ..... 3IR10RD TN6025 ...........................F66
2019381 ..... 3IR8RD TN6025 .............................F66
2019394 ..... 4IR6RD TN6025 .............................F66
2019400 ..... 4IR4RD TN6025 .............................F66
2019441 ..... 3IR16PG TN6025 ...........................F65
2019453 ..... 3ER2TR TN6025 ............................F67
2019461 ..... 3ER3TR TN6025 ............................F67
2019463 ..... 3EL3TR TN6025 .............................F67
2019469 ..... 4ER4TR TN6025 ............................F67
2019471 ..... 4EL4TR TN6025 .............................F67
2019479 ..... 4ER5TR TN6025 ............................F67
2019487 ..... 5ER6TR TN6025 ............................F67
2019511 ..... 3IR3TR TN6025..............................F68
2019520 ..... 4IR4TR TN6025..............................F68
2019528 ..... 4IR5TR TN6025..............................F68
2019534 ..... 5IR6TR TN6025..............................F68
2019608 ..... 3ER10APIRD TN6025 .....................F64
2019618 ..... 3IR10APIRD TN6025 ......................F64
2019622 ..... 3IR8APIRD TN6025 ........................F64
2020009 ..... CNMM12040865 TN7025............. B44
2020061 ..... CNMM16061665 TN7025............. B44
2020663 ..... SNMT1205AZR31 TN7535 ............ H55
2020673 ..... SNMT1205AZR31 TN7525 ............ H55
2020677 ..... SNKT1205AZR31 TN7535............. H55
2020681 ..... SNKT1205AZR31 TN25M .............. H55
2020683 ..... SNKT1205AZR31 TN7525............. H55
2020691 ..... SNKT1205AZER20 TN7535 ........... H54
2020693 ..... SNKT1205AZER20 TN450 ............. H54
2020695 ..... SNMT1505AZR31 TN7535 ............ H59
2020701 ..... SNMT1505AZR31 TN7525 ............ H59
2020703 ..... SNMT1505AZR31 TN450 .............. H59
2020705 ..... SNKT1505AZR31 TN7535............. H59
2020711 ..... SNKT1505AZR31 TN7525............. H59
2020713 ..... SNKT1505AZR31 TN450 ............... H59
2020723 ..... CPNT120408T TN7535 ....................L6
2020727 ..... RDMW0802M0T TN7535 ..............M76
2020735 ..... RDMW1003M0T TN7535 ..............M81
2020741 ..... RDMW1204M0TX TN7535 ............M87
2020749 ..... RDMW1605M0TX TN7535 ............M93
2020757 ..... RDMT0802M0T TN7535 ...............M75
2020763 ..... RDMT1204M0TX TN7525 .............M87
2020767 ..... RDMT1605M0TX TN7525 .............M92
2020771 ..... RCMT1606M043M TN7525 ..........M97
2020775 ..... RDHT1204M0TX TN7525 ..............M86
2020781 ..... RCMT1606M0TX TN7535 .............M97
2021331 ..... 12391010000 W ..........................M74
2021332 ..... 12391010400 W ..........................M74
2021333 ..... 12391010600 W ..........................M74
2021334 ..... 12391011000 W ..........................M74
2021335 ..... 12391011400 W ..........................M74
2021336 ..... 12391011600 W ..........................M79
2021337 ..... 12391012000 W ..........................M79
2021338 ..... 12391012400 W ..........................M79
2021339 ..... 12391012800 W ..........................M79
2021340 ..... 12391013200 W ..........................M79
2021341 ..... 12391013800 W ..........................M90
2021342 ..... 12391020000 W ..........................M85
2021343 ..... 12391020200 W ..........................M85
2021344 ..... 12391020400 W ..........................M85
2021345 ..... 12391020600 W ..........................M85
2021346 ..... 12391020800 W ..........................M85
2021347 ..... 12391021000 W ..........................M91
2021348 ..... 12391021200 W ..........................M91
2021349 ..... 12391021400 W ..........................M91
2021350 ..... 12391021600 W ..........................M91
2021351 ..... 12391021800 W ..........................M91
2021352 ..... 12391022000 W ..........................M96
2021353 ..... 12391022200 W ..........................M96
2021354 ..... 12391022400 W ..........................M96
2021355 ..... 12391022600 W ..........................M96
2021356 ..... 12391022800 W ..........................M96
2021357 ..... 12391023200 W ..........................M96
2021358 ..... 12391023400 W ..........................M96
2021359 ..... 12391023600 W ..........................M96
2021360 ..... 12391023800 W ..........................M96
2021361 ..... 12391024000 W ..........................M85
2021374 ..... 12391050200 W ..........................M84
2021375 ..... 12391050400 W ..........................M78
2021376 ..... 12391050600 W ..........................M78
2021378 ..... 12391051000 W ..........................M84
2021379 ..... 12391051200 W ..........................M84
2021380 ..... 12391602600M W ..........................L4
2021381 ..... 12391603000 W .............................L4
2021382 ..... 12391603400 W .............................L4
2021383 ..... 12391603800 W .............................L4
2021422 ..... 12393041200 W .............................K4
2021423 ..... 12393041400 W .............................K4
2021424 ..... 12393041800 W .............................K4
2021428 ..... 12393051200 W ........................ K4–5
2021429 ..... 12393051400 W ........................ K4–5
2021430 ..... 12393051800 W ........................ K4–5
2021597 ..... 5IR55ISO TN6025 ..........................F52
2021625 ..... 12251221900 W .........................E104
2021626 ..... 12251221600 W .........................E104
2021627 ..... 12251763500 W .........................E103
2021629 ..... 12251332000 W .........................E104
2021631 ..... 12251762300 W .........................E103
2021634 ..... 12251212500 W .........................E104
2021635 ..... 12251222500 W .........................E104
2021636 ..... 12251762500 W .........................E103
2021637 ..... 12251762400 W .........................E103
2021639 ..... 12251342000 W .........................E104
2021640 ..... 12251343000 W .........................E104
2021641 ..... 12251344000 W .........................E104
2021656 ..... 2ILA60 TN6025 ..............................F47
2021677 ..... 3ER18W TN6025 ...........................F62
2021718 ..... 12250110600 W .........................E106
2021719 ..... 12250110500 W .........................E106
2021720 ..... 12250110800 W .........................E106
2021721 ..... 12250110700 W .........................E106
2021722 ..... 12250111000 W .........................E106
2021723 ..... 12251234000 W .........................E104
2021725 ..... 4ER6W TN6025 .............................F62
2021743 ..... 12251368000 W .........................E104
2021798 ..... 123568160 TTM ..........................E105
2021804 ..... 123567320 TN8025 ......................E97
2021836 ..... 123567440 TPC35 ........................E99
2021873 ..... 123567350 THM ...........................E97
2021925 ..... 123506602 THM ...........................L20
2021947 ..... CCMT0602042 TTI15.................... B30
2022071 ..... CNMM250924SR TN7025 ............ B44
2022079 ..... CPGT04T1043 TN35 ..................... B45
2022082 ..... CPGT04T1043 TTR ....................... B45
2022089 ..... CPNT080308T THM .........................L5
2022092 ..... CPNT09T308T TTM08 .....................L6
2022221 ..... DNMG11040822 TTI15 ................. B53
2022257 ..... CCGT060202AL3 HCK10 ............ B155
2022258 ..... CCGT060202AL3 HWK15 ........... B155
2022259 ..... CCGT060204AL3 HCK10 ............ B155
2022260 ..... CCGT060204AL3 HWK15 ........... B155
2022261 ..... CCGT09T304AL3 HCK10 ............ B155
2022262 ..... CCGT09T304AL3 HWK15 ........... B155
2022323 ..... CCGT120404AL3 HCK10 ............ B155
2022324 ..... CCGT120404AL3 HWK15 ........... B155
2022325 ..... CCGT120408AL3 HCK10 ............ B155
2022326 ..... CCGT120408AL3 HWK15 ........... B155
2022327 ..... DCGT070202AL3 HCK10 ............ B156
2022328 ..... DCGT070202AL3 HWK15 ........... B156
2022329 ..... DCGT070204AL3 HCK10 ............ B156
2022330 ..... DCGT070204AL3 HWK15 ........... B156
2022331 ..... DCGT11T304AL3 HWK15 ........... B156
2022332 ..... DCGT11T308AL3 HCK10 ............ B156
2022335 ..... MDHW120408 THM .......................L29
2022340 ..... NL82R W........................................F70
2022342 ..... NVR132R W ...................................F74
2022343 ..... NVR204R W ...................................F74
2022345 ..... OVR152R W ...................................F75
2022370 ..... SNKT1205AZER20 TN7525 ........... H54
2022371 ..... SNKT1205AZER20 TTI25 .............. H54
2022373 ..... SNKT1205AZR21 TN7525............. H54
2022374 ..... SNKT1205AZR21 TTI25 ................ H54
2022375 ..... SNKT1205AZR21 THM .................. H54
2022446 ..... 12250110100 W .........................E106
2022447 ..... 12250110200 W .........................E106
2022483 ..... DCGT11T308AL3 HWK15 ........... B156
2022484 ..... VCGT160404AL3 HCK10 ............ B157
2022485 ..... VCGT160404AL3 HWK15 ........... B157
2022487 ..... VCGT160408AL3 HCK10 ............ B157
2022488 ..... VCGT160408AL3 HWK15 ........... B157
2022489 ..... VCGT160412AL3 HWK15 ........... B157
2022547 ..... 12251763100 W .........................E103
2022548 ..... 12251764000 W .........................E103
2022549 ..... 12251764100 W .........................E103
2022550 ..... 12251764400 W .........................E103
2022551 ..... 12251764500 W .........................E103
2022552 ..... 12251765200 W .........................E103
2022553 ..... 12251765300 W .........................E103
2022555 ..... 12251766200 W .........................E103
2022556 ..... 12251766300 W .........................E103
2022557 ..... 12251766400 W .........................E103
2022558 ..... 12251766500 W .........................E103
2022559 ..... 12251768500 W .........................E103
2022560 ..... 12251783000 W .........................E102
2022561 ..... 12251783100 W .........................E102
2022562 ..... 12251784000 W .........................E102
2022563 ..... 12251784100 W .........................E102
2022564 ..... 12251785200 W .........................E102
2022565 ..... 12251785300 W .........................E102
2022566 ..... 12251785400 W .........................E102
2022567 ..... 12251785500 W .........................E102
2022568 ..... 12251786400 W .........................E102
2022569 ..... 12251788400 W .........................E102
2022589 ..... AL325R W ......................................F70
2022619 ..... 12290900800 W ...........................L10
2022620 ..... 12290901200 W ...........................L10
2022621 ..... 12290911600 W ...........................L11
2022622 ..... 12290911800 W ...........................L11
2022628 ..... 12292510400 W ..............................I4
2022629 ..... 12292510800 W ..............................I4
2022630 ..... 12292511000 W ..............................I4
2022631 ..... 12292511200 W ..............................I6
2022632 ..... 12292511400 W ..............................I7
2022633 ..... 12292511600 W ..............................I7
2022634 ..... 12292550400 W ..............................I5
2022635 ..... 12292550800 W ..............................I5
2022636 ..... 12292551000 W ..............................I5
2022648 ..... 12299535500 W ...........................L18
2022650 ..... 12299536000 W ...........................L18
2022652 ..... 12299545800 W ...........................L18
2022716 ..... 12346292100 W ................... W52–53
2022717 ..... 12346292200 ....................... W52–53
2022787 ..... 123568081 THM .........................E105
2022789 ..... 123568140 THM .........................E105
2022790 ..... 123568160 THM .........................E105
2022791 ..... 123568161 THM .........................E105
2022854 ..... CCGT09T302AL3 HWK15 ........... B155
2022858 ..... CCGT09T308AL3 HWK15 ........... B155
2022859 ..... CCGT120402AL3 HWK15 ........... B155
2022861 ..... DCGT11T302AL3 HWK15 ........... B156
2022921 ..... 12191061900 W .........................E107
2022922 ..... 12191062586 W .........................E107
2022923 ..... 12191063286 W .........................E107
2023597 ..... E06JSCLPL04 WG ......................... C70
2023598 ..... E06JSCLPR04 WG ........................ C70
2023600 ..... E08KSCFCR06 WG ........................ C66
2023601 ..... E08KSCLCL06 WG ........................ C68
2023603 ..... E08KSCLCR065 WG ...................... C68
2023607 ..... E12QSCLCL06 WG ........................ C68
2023608 ..... E12QSCLCR06 WG........................ C68
2023610 ..... E12QSDUCL07 W .......................... C74
2023611 ..... E12QSDUCR07 W ......................... C74
2023613 ..... E16RSCLCL09 WG ........................ C68
2023614 ..... E16RSCLCR09T3 WG .................... C68
2023615 ..... E16RSCLCL09T3 WG .................... C68
2023617 ..... E16RSDUCL07 W .......................... C74
2023618 ..... E16RSTFCL16 WG ........................ C77
2023621 ..... E20SSCLCR09 WG ........................ C68
2023622 ..... E20SSDQCL11 WG........................ C72
2023623 ..... E20SSDQCR11 WG ....................... C72
2023624 ..... E20SSDUCR11 W .......................... C74
2023625 ..... E20SSTFCL16 WG......................... C77
2023626 ..... E20SSTFCR16 WG ........................ C77
2023629 ..... E25TSDUCL11 W .......................... C74
2023630 ..... E25TSDUCR11 W .......................... C74
2023631 ..... E25TSTFCR16 WG ........................ C77
2023632 ..... E32USCLCR12 WG ........................ C68
2023638 ..... SCGT120408AL3 HWK15 ........... B156
2024450 ..... SDJCL1616H11 W ........................ C44
2024559 ..... VCGT110302AL3 HWK15 ........... B157
2024561 ..... VCGT110304AL3 HWK15 ........... B157
2025073 ..... 12146011800 W ..................V10, V13,
V16, V19
2025074 ..... 12147548600 W ...........................L18
2025731 ..... 12147562300 W ...........................L18
2025735 ..... 12147572400 W ...........................L18
2025828 ..... NVR102R W ...................................F74
2026017 ..... TCAX1103ZZ21 THM .....................L12
2026018 ..... TCAX1103ZZ21 TTM08..................L12
2026022 ..... TNAX2206ZZ51 TTM......................L13
2027339 ..... CCMT090308 TTR ........................ B30
2027432 ..... CCMT09T308 THM ....................... B30
2027465 ..... CCMT09T312 TTR......................... B30
Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 7 11/2/15 10:33 AM
LViWID M 16 I d Z002 Z145 M i REBRAND O b 28 2015 3 09 PM
Z8 widia.com
Index by Order Number
Order No. Catalogue No. Page(s)
2027472 ..... CCMT120408 THM ....................... B30
2027484 ..... CCMT120408 TTR ........................ B30
2027507 ..... CCMW060204 THM ...................... B34
2027509 ..... CCMW090304 THM ...................... B34
2027511 ..... CCMW09T304 THM ...................... B34
2027512 ..... CCMW09T308 THM ...................... B34
2027524 ..... CCMW120404 THM ...................... B34
2027525 ..... CCMW120408 THM ...................... B34
2027567 ..... CNMG120408 THM ....................... B37
2027768 ..... DCMT070204 THM ....................... B47
2027804 ..... DCMT11T304 TTI15 ...................... B47
2027805 ..... DCMT11T304 THM ....................... B47
2027807 ..... DCMT11T304 TTR ........................ B47
2027843 ..... DCMT11T308 THM ....................... B47
2027868 ..... DCMT11T312 THM ....................... B47
2027887 ..... DCMT150404 THM ....................... B47
2027908 ..... DCMT150408 THM ....................... B47
2027910 ..... DCMT150408 TTR ........................ B47
2027932 ..... DCMT150412 THM ....................... B47
2027965 ..... DCMT150416 THM ....................... B47
2027966 ..... DCMW070204 THM ...................... B50
2027967 ..... DCMW11T304 THM ...................... B50
2028115 ..... RCMT0602M0 THM ...................... B65
2028129 ..... RCMT0803M0 THM ...................... B65
2028143 ..... RCMT10T3M0 THM....................... B65
2028145 ..... RCMT10T3M0 TTR ........................ B65
2028157 ..... RCMT1204M0 THM ...................... B65
2028170 ..... RCMT1606M043 THM .................. B65
2028196 ..... RCMX2507M0T TTR...................... B66
2028225 ..... SCMT090304 TTR......................... B68
2028255 ..... SCMT09T304 THM........................ B68
2028259 ..... SCMT09T304MU TN8025 ............. B69
2028270 ..... SCMT09T308 THM........................ B68
2028272 ..... SCMT09T308 TTR ......................... B68
2028286 ..... SCMT120408 THM ....................... B68
2028289 ..... SCMT120408 TTR......................... B68
2028295 ..... SCMT120412 TTI15 ...................... B68
2028296 ..... SCMT120412 THM ....................... B68
2028306 ..... SCMT150512 THM ....................... B68
2028307 ..... SCMT150512 TTR......................... B68
2028308 ..... SCMW090304 THM ...................... B70
2028310 ..... SCMW120408 THM ...................... B70
2028314 ..... SDMT1204PDRMH TN2510 ...........J46
2028318 ..... SDMT1204PDRMH THM ...........J46, K7
2028323 ..... SDMT1204PDRML THM ...........J45, K6
2028325 ..... SDMT1506PDRMH TN2510 ...........J50
2028332 ..... SDMW090308 THM ..........................I8
2028336 ..... SDNT090308T TN2510 .....................I8
2028338 ..... SDNT090308T SPTM00 ....................I8
2028371 ..... SNMA120408 THM ....................... B71
2028535 ..... SPNT120408 SPTM00 ......................I9
2028543 ..... SPUN090308 THM ........................ B80
2028547 ..... SPUN120304 THM ........................ B80
2028555 ..... SPUN120308 THM ........................ B80
2028560 ..... SPUN120312 THM ........................ B80
2028562 ..... SPUN120412 THM ........................ B80
2028565 ..... SPUN150412 THM ........................ B80
2028567 ..... SPUN150412 TTR ......................... B80
2028568 ..... SPUN190412 THM ........................ B80
2028579 ..... TCMT110202 THM........................ B81
2028587 ..... TCMT110204 THM........................ B81
2028589 ..... TCMT110204 TTR ......................... B81
2028607 ..... TCMT16T304 THM ........................ B81
2028624 ..... TCMT16T308 THM ........................ B81
2028627 ..... TCMT16T308 TTR ......................... B81
2028660 ..... TCMT220408 THM........................ B81
2028668 ..... TCMW110204 THM ...................... B83
2028670 ..... TCMW16T304 THM ...................... B83
2028806 ..... TPUN110304 THM ........................ B93
2028814 ..... TPUN110308 THM ........................ B93
2028821 ..... TPUN160304 THM ........................ B93
2028830 ..... TPUN160308 THM ........................ B93
2028832 ..... TPUN160308 TTR ......................... B93
2028833 ..... TPUN160312 THM ........................ B93
2028843 ..... TPUN220412 THM ........................ B93
2028847 ..... TPUN220412 TTR ......................... B93
2029211 ..... 12146003800 W .........................E104
2029212 ..... 12146006300 ................... M102–104
2029220 ..... 12146009500 W .........................E104
2029221 ..... 12146010000 ....... V10, V13, V16, V19
2029222 ..... 12146012600 W ................ E102–103
2029223 ..... 12146012700 W ................ E102–103
2029224 ..... 12146013400 W .........................E104
2029249 ..... 12147519100 W .......... W38–39, W41
2029266 ..... 12147549000 ........ M42–43, M46–48
2029276 ..... 12147579300 W ................... W44–45
2029281 ..... 12147600100 W ................... W36–37
2029282 ..... 12147600200 W ................... W36–37
2029283 ..... 12147600300 W .......... W36–38, W40
2029284 ..... 12147600400 W ................... W36–37
2029291 ..... 12147602200 W ................... W42–45
2029292 ..... 12147602300 W ................... W36–37
2029293 ..... 12147602400 W ................... W36–37
2029294 ..... 12147602500 W ................... W36–37
2029295 ..... 12147602600 W ................... W36–37
2029296 ..... 12147602700 W ................... W36–37
2029297 ..... 12147602800 W ................... W36–37
2029299 ..... 12147603900 W ................... W36–37
2029300 ..... 12147604000 W ................... W36–37
2029316 ..... 12147613500 W ......................... W38
2029335 ..... 12147617400 W ......................... W50
2029348 ..... 12147621100 W ................... W52–53
2029349 ..... 12147621200 W ................... W52–53
2029350 ..... 12147621300 W ................... W52–53
2029351 ..... 12147621400 W ................... W52–53
2029352 ..... 12147621500 W ................... W52–53
2029353 ..... 12147621600 W ................... W52–53
2029356 ..... 12147622300 W ................... W52–53
2029359 ..... 12147625200 W ......................... W41
2029360 ..... 12147625400 W ....................K4, W40
2029398 ..... 12147665000 W .......... W39, W42–45
2029399 ..... 12147666700 W ......................... W40
2029424 ..... 12147680200 W ................... W52–53
2029425 ..... 12147680300 W ................... W52–53
2029426 ..... 12147680400 W ................... W52–53
2029427 ..... 12147680500 W ....W49–50, W52–53
2029428 ..... 12147680600 W ................... W52–53
2029429 ..... 12147680700 W ................... W52–53
2029459 ..... 12147739900 W ......................... W40
2029461 ..... 12147740200 W ......................... W38
2029478 ..... 12148000600 .......H44–45, I4–6, J44,
K4, L4, M78–79,
M84–85
2029481 ..... 12148001100 W ...........................F75
2029484 ..... 12148005900 ............................. W51
2029488 ..... 12148007500 ...H52–53, H58, I7, J48,
L4, L11, M90–91, M96,
V10, V13, V16, V19
2029499 ..... 12148021900 W .........................E107
2029506 ..... 12148024100 W .........................E107
2029507 ..... 12148024200 W .........................E107
2029508 ..... 12148024500 W .........................E107
2029511 ..... 12148024800 W .........................E107
2029521 ..... 12148031686 TTR ......................E107
2029523 ..... 12148032086 TTR ......................E107
2029535 ..... 12148036000 W .........................E104
2029542 ..... 12148040900 W ........ E106, W42–45,
W52–53
2029543 ..... 12148041000 W ........ E106, W42–45,
W52–53
2029544 ..... 12148041100 W ..... E102–103, E106,
W39, W42–45, W49–50,
W52–53, W56, W58, W60,
W62, W65–66
2029545 ..... 12148041200 W ...............E106, W41,
W52–53, W56–62,
W65–66
2029546 ..... 12148041300 W ...... E102–104, W41,
W49–50, W52–53,
W56–63, W65–66
2029547 ..... 12148041400 W ........ E104, W52–53,
W56–63, W65–66
2029548 ..... 12148042400 W ................... W49–50
2029559 ..... 12148046000 W ......... E106, W44–45
2029560 ..... 12148050000 .......... L24–25, L27–28
2029582 ..... 12148069600 W ................... W42–45
2029585 ..... 12148079000 W ................... W52–53
2029596 ..... 12148082400 .............H5–7, H12–15,
H20, H26, H30, H32,
H38, M52–55, M59–62,
V10, V13, V16, V19, W42,
W44–45, W54–55
2029598 ..... 12148086600 W .....L4, L10–11, M74,
W42–48, W51,
W54–55
2029599 ..... 12148086800 ................... M102–104
2029604 ..... 12148099300 .................. M102–105,
M118–120,
M124–126
2029605 ..... 12148099400 ........ M66–67, W42–45
2029622 ..... 12148541600 W ......................... W44
2029662 ..... 12148575900 W ................... W52–53
2029667 ..... 12148580011 TTR ......................E107
2029684 ..... 12148586611 TTR ......................E107
2029685 ..... 12148587011 TTR ......................E107
2029686 ..... 12148587111 TTR ......................E107
2029691 ..... 12148588311 TTR ......................E107
2029696 ..... 12148589800 W .........................E107
2029712 ..... 12148788900 W .............. M102–105,
M118–120,
M124–126
2029751 ..... CCMT09T308MU SPN3W1 ........... B33
2029792 ..... SPNT120408 TN7535 .......................I9
2029794 ..... SPNT120408 TN7525 .......................I9
2030198 ..... SDNT090308 TN7535 .......................I8
2030200 ..... SDNT090308 TN7525 .......................I8
2030201 ..... SDNT090308 TN450 .........................I8
2030400 ..... SDMT1506PDRMH TN7535 ...........J50
2030414 ..... SDMT1506PDRMH TN7525 ...........J50
2030417 ..... SDMT1204PDRMH TN7535 .....J46, K7
2030419 ..... SDMT1204PDRMH TN7525 .....J46, K7
2030420 ..... SDMT1506PDRML TN7535 ............J49
2030434 ..... SDMT1506PDRML TN7525 ............J49
2030437 ..... SDMT1204PDRML TN7535 ......J45, K6
2030439 ..... SDMT1204PDRML TN7525 ......J45, K6
2030677 ..... 12147522400 W ......................... W64
2030737 ..... 12147789100 W ...........................F75
2031018 ..... E06JSCFPL04 WG ......................... C67
2031019 ..... E08KSCFCL06 WG ........................ C66
2031020 ..... E08KSCLCL065 WG ...................... C68
2031021 ..... E10MSCLCR06 ............................. C68
2031022 ..... E10MSCLCL06 WG ....................... C68
2031023 ..... E12QSDQCL07 WG ....................... C72
2031024 ..... E12QSTFCR11 WG ........................ C77
2031025 ..... E16RSDQCR07 WG ....................... C72
2031026 ..... E20SSCLCL09 WG ........................ C68
2031027 ..... E20SSCLCL09T3 WG .................... C68
2031028 ..... E25TSCLCL09T3 WG .................... C68
2031029 ..... E25TSCLCR09 WG ........................ C68
2031658 ..... CCMT060202 THM ....................... B30
2031665 ..... CCMT060204 TTI15 ...................... B30
2031666 ..... CCMT060204 THM ....................... B30
2031668 ..... CCMT060204 TTR ........................ B30
2031693 ..... CCMT090304 THM ....................... B30
2031695 ..... CCMT090304 TTR ........................ B30
2031706 ..... CCMT090308 THM ....................... B30
2031723 ..... CCMT09T304 THM ....................... B30
2031733 ..... CCMW060202 THM ...................... B34
2031734 ..... CCMW090302 THM ...................... B34
2031737 ..... DCMW150408 THM ...................... B50
2031778 ..... 12147739800 W ......................... W41
2031786 ..... TPGA110208 THM ........................ B91
2031813 ..... 12147620000 W ................... W52–53
2031814 ..... 12147620300 W ................... W52–53
2031815 ..... 12147620400 W ................... W52–53
2031816 ..... 12147620500 W ................... W52–53
2031817 ..... 12147620600 W ................... W52–53
2031825 ..... 12147676800 W ...........................L18
2031826 ..... 12147676900 W ...........................L18
2031827 ..... 12147677000 W ...........................L18
2031836 ..... 12148087100 W ................... W52–53
2031888 ..... E10MSTFCR11 WG ....................... C77
2031953 ..... 12148574000 W .........................E106
2032252 ..... 12748605300 W .................... L27–28
2032259 ..... 12748600900 W .......................... H72
2033475 ..... 12749726100 W .................... L24–25
2033495 ..... M4000CA-SE1204 ........................ H73
2033496 ..... M4000CA-TP1603 ........................ H73
2050081 ..... MS2111 ..........................E74–76, E78,
F24–27, F31
2050082 ..... S2112 ..................................... F24–25
2050269 ..... CCMT090304MU TN2000 ............. B33
2055461 ..... 12748701000 ............... H7, H15, H20,
H26, H32, H38
2058066 ..... 12191062686 .............................E107
2065134 ..... AVR25D3L W .................................F74
2065135 ..... AVR25D4L W .................................F74
2065289 ..... 3EL11W TN6025............................F62
2065591 ..... 12399010800 W ...........................L24
2067140 ..... RCMT1606M043M TN7535 ..........M97
2067470 ..... M270BD016A16L155 W ............ M104
2067492 ..... M4000CA-SD1204 ....................... H73
2067540 ..... 12399011400 W ...........................L24
2067541 ..... 12399013400 W ...........................L24
2071294 ..... AL163L W ......................................F70
2071295 ..... AL203L W ......................................F70
2071317 ..... NVR163L W ...................................F74
2071318 ..... AVR203L W ....................................F74
2071904 ..... 3ELAG60 TN6025 ..........................F46
2071923 ..... 2IL20ISO TN6025 ...........................F52
2071943 ..... 3EL8RD TN6025 ............................F65
2074676 ..... 12148783700 .................................K4
2076776 ..... 4IL50ISO TN6025 ...........................F53
2095640 ..... M270TF12R2 TN2505 ............... M122
Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 8 11/2/15 10:33 AM
LViWID M 16 I d Z002 Z145 M i REBRANDO b 28 20153 09PM
Z9
widia.com
Index by Order Number
Order No. Catalogue No. Page(s)
2095682 ..... M270TF10R1 TN2505 ............... M122
2100489 ..... 4ILN60 TN6025..............................F47
2101539 ..... 4EL40ISO TN6025 .........................F50
2101597 ..... 4EL50ISO TN6025 .........................F50
2102322 ..... 4IL40ISO TN6025 ...........................F53
2102347 ..... 4IL45ISO TN6025 ...........................F53
2102653 ..... 2IL32UN TN6025 ...........................F57
2102749 ..... 3IL12UN TN6025 ...........................F57
2103046 ..... 3EL8W TN6025 ..............................F62
2105263 ..... SDMW090308 TN7525 .....................I8
2109381 ..... RDMW1003M0T TN7525 ..............M81
2109440 ..... RDMW1204M0TX TN7525 ............M87
2109476 ..... RDMW1605M0TX TN7525 ............M93
2109542 ..... RDMT1204M0TX TN7535 .............M87
2109552 ..... RDMT1204M0TX TN2510 .............M87
2109972 ..... 12748610500 W .............. M102–105,
M119–120,
M125–126
2109974 ..... 12748610600 W .............. M102–105,
M118–120,
M124–126
2109976 ..... 12748610700 W .............. M102–105,
M118–120,
M124–126
2109978 ..... 12748610800 W .............. M102–105,
M118–120,
M124–126
2109980 ..... 12748610900 W ............... M102–104
2109982 ..... 12748611000 W ............... M102–104
2113506 ..... M270BR16 TN7535 ................... M109
2114772 ..... AL254L W ......................................F70
2114832 ..... AVR253L W ....................................F74
2116241 ..... 12399013600 W ...........................L24
2157715 ..... MDHX09T308 THM ........................L26
2192607 ..... 3EL12UN TN6025 ..........................F55
2202572 ..... M41406 ........................................ R11
2207645 ..... RDMT1605M0TX TN7535 .............M92
2207906 ..... 12346233000 ............................. W38
2219983 ..... M41237 .......................................... R6
2220466 ..... M41263 .......................................... R7
2243613 ..... M270BD010A12L140 W ............ M104
2243614 ..... M270BD012A12L145 W ............ M104
2243615 ..... M270BD020A20L170 W ............ M104
2243616 ..... M270BD025A25L195 W ............ M104
2243617 ..... M270BD032A32L205 W ............ M104
2243618 ..... M270BD010B12L90 W .............. M103
2243619 ..... M270BD012B12L95 W .............. M103
2243620 ..... M270BD016B16L105 W ............ M103
2243621 ..... M270BD020B20L120 W ............ M103
2243622 ..... M270BD025B25L145 W ............ M103
2243623 ..... M270BD032B32L155 W ............ M103
2243624 ..... M270BD010M08 W ................... M102
2243625 ..... M270BD012M08 W ................... M102
2243626 ..... M270BD016M08 W ................... M102
2243627 ..... M270BD020M10 W ................... M102
2243628 ..... M270BD025M12 W ................... M102
2243629 ..... M270BD032M16 W ................... M102
2248993 ..... 50HC030M ..................................T117
2248994 ..... 50HC050M ..................................T117
2248995 ..... 75HC030M ..................................T117
2248996 ..... 75HC040M ..................................T117
2248997 ..... 75HC050M ..................................T117
2251521 ..... SSP025018M .........C9, C12, C14, C56
2255810 ..... 7F1-0806A ................................... U30
2256338 ..... D61803002RJ TIALN-RJ ............. O191
2256340 ..... D61805002RJ TIALN-RJ ............. O191
2256341 ..... D61806002RJ TIALN-RJ ............. O191
2256342 ..... D61807003RJ TIALN-RJ ............. O191
2256353 ..... D61808003RJ TIALN-RJ ............. O191
2256354 ..... D61810004RJ TIALN-RJ ............. O191
2256355 ..... D61812005RJ TIALN-RJ ............. O191
2256356 ..... D61816006RJ TIALN-RJ ............. O191
2256357 ..... D61820007RJ TIALN-RJ ............. O191
2256358 ..... 7N0100302RJ TIALN-RJ1 ........... O165
2256359 ..... 7N0100402RJ TIALN-RJ1 ........... O165
2256360 ..... 7N0100502RJ TIALN-RJ1 ........... O165
2256361 ..... 7N0100602RJ TIALN-RJ1 ........... O165
2256362 ..... 7N0100802RJ TIALN-RJ1 ........... O165
2256363 ..... 7N0101002RJ TIALN-RJ1 ........... O165
2256364 ..... 7N0101202RJ TIALN-RJ1 ........... O165
2256365 ..... 7N0101402RJ TIALN-RJ1 ........... O165
2256366 ..... 7N0101502RJ TIALN-RJ1 ........... O165
2256367 ..... 7N0101602RJ TIALN-RJ1 ........... O165
2256368 ..... 7N0101802RJ TIALN-RJ1 ........... O165
2256369 ..... 7N0102002RJ TIALN-RJ1 ........... O165
2256370 ..... 7N0102502RJ TIALN-RJ1 ........... O165
2256371 ..... 7N0103002RJ TIALN-RJ1 ........... O165
2256372 ..... 7N0104002RJ TIALN-RJ1 ........... O165
2256373 ..... 7N0106002RJ TIALN-RJ1 ........... O165
2256390 ..... 7N0200302RJ TIALN-RJ1 ........... O160
2256391 ..... 7N0200402RJ TIALN-RJ1 ........... O160
2256392 ..... 7N0200502RJ TIALN-RJ1 ........... O160
2256393 ..... 7N0200602RJ TIALN-RJ1 ........... O160
2256394 ..... 7N0200802RJ TIALN-RJ1 ........... O160
2256395 ..... 7N0201002RJ TIALN-RJ1 ........... O161
2256396 ..... 7N0201202RJ TIALN-RJ1 ........... O161
2256397 ..... 7N0201402RJ TIALN-RJ1 ........... O161
2256398 ..... 7N0201502RJ TIALN-RJ1 ........... O161
2256399 ..... 7N0201602RJ TIALN-RJ1 ........... O162
2256400 ..... 7N0201802RJ TIALN-RJ1 ........... O162
2256401 ..... 7N0202002RJ TIALN-RJ1 ........... O162
2256402 ..... 7N0202502RJ TIALN-RJ1 ........... O163
2256403 ..... 7N1200502RJ TIALN-RJ1 ........... O160
2256404 ..... 7N1200602RJ TIALN-RJ1 ........... O160
2256405 ..... 7N1200802RJ TIALN-RJ1 ........... O160
2256406 ..... 7N1201002RJ TIALN-RJ1 ........... O161
2256407 ..... 7N1201202RJ TIALN-RJ1 ........... O161
2256408 ..... 7N1201402RJ TIALN-RJ1 ........... O161
2256409 ..... 7N1201502RJ TIALN-RJ1 ........... O161
2256410 ..... 7N1201602RJ TIALN-RJ1 ........... O162
2256411 ..... 7N1201802RJ TIALN-RJ1 ........... O162
2256412 ..... 7N1202002RJ TIALN-RJ1 ........... O162
2256413 ..... 7N1202502RJ TIALN-RJ1 ........... O163
2256438 ..... 7N2200400RJ TIALN-RJ1 ........... O160
2256439 ..... 7N2200410RJ TIALN-RJ1 ........... O160
2256440 ..... 7N2200500RJ TIALN-RJ1 ........... O160
2256441 ..... 7N2200510RJ TIALN-RJ1 ........... O160
2256442 ..... 7N2200520RJ TIALN-RJ1 ........... O160
2256443 ..... 7N2200600RJ TIALN-RJ1 ........... O160
2256444 ..... 7N2200610RJ TIALN-RJ1 ........... O160
2256445 ..... 7N2200620RJ TIALN-RJ1 ........... O160
2256446 ..... 7N2200701RJ TIALN-RJ1 ........... O160
2256447 ..... 7N2200711RJ TIALN-RJ1 ........... O160
2256448 ..... 7N2200721RJ TIALN-RJ1 ........... O160
2256449 ..... 7N2200801RJ TIALN-RJ1 ........... O160
2256450 ..... 7N2200811RJ TIALN-RJ1 ........... O160
2256451 ..... 7N2200821RJ TIALN-RJ1 ........... O160
2256452 ..... 7N2200901RJ TIALN-RJ1 ........... O160
2256453 ..... 7N2200911RJ TIALN-RJ1 ........... O161
2256454 ..... 7N2200921RJ TIALN-RJ1 ........... O161
2256455 ..... 7N2201001RJ TIALN-RJ1 ........... O161
2256456 ..... 7N2201011RJ TIALN-RJ1 ........... O161
2256457 ..... 7N2201021RJ TIALN-RJ1 ........... O161
2256458 ..... 7N2201031RJ TIALN-RJ1 ........... O161
2256459 ..... 7N2201201RJ TIALN-RJ1 ........... O161
2256460 ..... 7N2201211RJ TIALN-RJ1 ........... O161
2256461 ..... 7N2201221RJ TIALN-RJ1 ........... O161
2256462 ..... 7N2201231RJ TIALN-RJ1 ........... O161
2256463 ..... 7N2201401RJ TIALN-RJ1 ........... O161
2256464 ..... 7N2201411RJ TIALN-RJ1 ........... O161
2256465 ..... 7N2201421RJ TIALN-RJ1 ........... O161
2256466 ..... 7N2201431RJ TIALN-RJ1 ........... O161
2256467 ..... 7N2201441RJ TIALN-RJ1 ........... O161
2256468 ..... 7N2201501RJ TIALN-RJ1 ........... O161
2256469 ..... 7N2201511RJ TIALN-RJ1 ........... O161
2256470 ..... 7N2201521RJ TIALN-RJ1 ........... O161
2256471 ..... 7N2201531RJ TIALN-RJ1 ........... O161
2256472 ..... 7N2201541RJ TIALN-RJ1 ........... O161
2256473 ..... 7N2201551RJ TIALN-RJ1 ........... O161
2256474 ..... 7N2201601RJ TIALN-RJ1 ........... O162
2256475 ..... 7N2201611RJ TIALN-RJ1 ........... O161
2256476 ..... 7N2201621RJ TIALN-RJ1 ........... O161
2256477 ..... 7N2201631RJ TIALN-RJ1 ........... O161
2256478 ..... 7N2201641RJ TIALN-RJ1 ........... O161
2256479 ..... 7N2201701RJ TIALN-RJ1 ........... O162
2256480 ..... 7N2201711RJ TIALN-RJ1 ........... O162
2256481 ..... 7N2201721RJ TIALN-RJ1 ........... O162
2256482 ..... 7N2201731RJ TIALN-RJ1 ........... O162
2256483 ..... 7N2201741RJ TIALN-RJ1 ........... O162
2256484 ..... 7N2201801RJ TIALN-RJ1 ........... O162
2256485 ..... 7N2201811RJ TIALN-RJ1 ........... O162
2256486 ..... 7N2201821RJ TIALN-RJ1 ........... O162
2256487 ..... 7N2201831RJ TIALN-RJ1 ........... O162
2256488 ..... 7N2201841RJ TIALN-RJ1 ........... O162
2256489 ..... 7N2201901RJ TIALN-RJ1 ........... O162
2256490 ..... 7N2201911RJ TIALN-RJ1 ........... O162
2256491 ..... 7N2201921RJ TIALN-RJ1 ........... O162
2256492 ..... 7N2201931RJ TIALN-RJ1 ........... O162
2256493 ..... 7N2201941RJ TIALN-RJ1 ........... O162
2256494 ..... 7N2202001RJ TIALN-RJ1 ........... O162
2256495 ..... 7N2202011RJ TIALN-RJ1 ........... O162
2256496 ..... 7N2202021RJ TIALN-RJ1 ........... O162
2256497 ..... 7N2202031RJ TIALN-RJ1 ........... O162
2256498 ..... 7N2202041RJ TIALN-RJ1 ........... O162
2256499 ..... 7N2202501RJ TIALN-RJ1 ........... O162
2256500 ..... 7N2202511RJ TIALN-RJ1 ........... O163
2256501 ..... 7N2202521RJ TIALN-RJ1 ........... O163
2256502 ..... 7N2202531RJ TIALN-RJ1 ........... O163
2256503 ..... 7N2202541RJ TIALN-RJ1 ........... O163
2256504 ..... 7N2203002RJ TIALN-RJ1 ........... O163
2256505 ..... 7N2203012RJ TIALN-RJ1 ........... O163
2256506 ..... 7N2203022RJ TIALN-RJ1 ........... O163
2256507 ..... 7N2203032RJ TIALN-RJ1 ........... O163
2256508 ..... 7N2203042RJ TIALN-RJ1 ........... O163
2257304 ..... D61804002RJ TIALN-RJ ............. O191
2261849 ..... 7F2-1078A ................................... U31
2263132 ..... 12395410200 W .......................... H45
2263154 ..... 12395410400 W .......................... H45
2263156 ..... 12395410600 W .......................... H45
2263158 ..... 12395410800 W .......................... H45
2263159 ..... 12395415800 W .......................... H45
2263160 ..... 12395411000 W .......................... H45
2263165 ..... 12395405200 W .......................... H44
2269913 ..... DT9IP ......................................... M4–6
2269914 ..... DT15IP ..................... J32–35, M11–12
2270852 ..... M41224 .......................................... R6
2271759 ..... HPPT06T3DZENGD TN7535 .......... H47
2271760 ..... HPPT06T3DZENGD TN7525 .......... H47
2276618 ..... RDMT1003M0T TN7535 ...............M81
2281545 ..... 022849-000020 K10F ................ O133
2281546 ..... 022849-000030 K10F ................ O133
2281547 ..... 022849-000040 K10F ................ O133
2281548 ..... 022849-000050 K10F ................ O133
2281549 ..... 022849-000060 K10F ................ O133
2281550 ..... 022849-000080 K10F ................ O133
2281551 ..... 022849-000100 K10F ................ O133
2281552 ..... 022849-000120 K10F ................ O133
2283423 ..... 050221-000020 K10..................... W8
2283424 ..... 050221-000022 K10..................... W8
2283426 ..... 050221-000025 K10..................... W8
2283427 ..... 050221-000028 K10..................... W8
2283428 ..... 050221-000030 K10..................... W8
2283429 ..... 050221-000032 K10..................... W8
2283430 ..... 050221-000035 K10..................... W8
2283431 ..... 050221-000040 K10..................... W8
2283445 ..... 050221-000050 K10..................... W8
2283450 ..... 050221-000075 K10..................... W8
2283451 ..... 050221-000080 K10..................... W8
2283463 ..... 050221-000085 K10..................... W8
2283464 ..... 050221-000090 K10..................... W8
2283465 ..... 050221-000095 K10..................... W8
2283466 ..... 050221-000100 K10..................... W8
2288066 ..... HPGT06T3DZENGD TN7535 .......... H47
2288067 ..... HPGT06T3DZENGD TN7525 .......... H47
2288069 ..... HPGT06T3DZENGD TN2510 .......... H47
2288070 ..... HPGT06T3DZERLD TN7525 .......... H46
2288072 ..... HPGT06T3DZERLD TN2510 .......... H46
2288103 ..... HPGT06T3DZERGD3W TN7525 ..... H47
2288106 ..... HPGT06T3DZFRLDAL THM ............ H46
2288107 ..... HPGT06T3DZFRLDAL THM-U ........ H46
2293636 ..... 050221-000014 K10..................... W8
2293637 ..... 050221-000015 K10..................... W8
2293638 ..... 050221-000016 K10..................... W8
2293640 ..... 050221-000045 K10..................... W8
2293641 ..... 050221-000055 K10..................... W8
2293642 ..... 050221-000060 K10..................... W8
2293643 ..... 050221-000065 K10..................... W8
2293644 ..... 050221-000070 K10..................... W8
2332115 ..... 022801-000020 K30F ............O88–89
2332116 ..... 022801-000025 K30F ............O88–89
2332117 ..... 022801-000030 K30F ............O88–89
2332118 ..... 022801-000035 K30F ............O88–89
2332119 ..... 022801-000040 K30F ..........O88, O90
2332121 ..... 022801-000050 K30F ..........O88, O90
2332122 ..... 022801-000060 K30F ..........O88, O90
2332123 ..... 022801-000070 K30F .......... O88, O90
2332124 ..... 022801-000080 K30F ..........O88, O90
2332125 ..... 022801-000090 K30F ............O89–90
2332127 ..... 022801-000120 K30F ............O89–90
2332131 ..... 022801-000200 K30F ............O89–90
2332132 ..... 022802-000020 K30F .................. O88
2332133 ..... 022802-000025 K30F .................. O88
2332135 ..... 022802-000030 K30F .................. O88
2332136 ..... 022802-000035 K30F .................. O88
2332137 ..... 022802-000040 K30F .................. O88
2332138 ..... 022802-000045 K30F ..........O88, O90
2332139 ..... 022802-000050 K30F .................. O88
2332140 ..... 022802-000060 K30F .................. O88
2332143 ..... 022802-000090 K30F .................. O89
2332144 ..... 022802-000100 K30F ............O89–90
2332147 ..... 022802-000140 K30F ............O89–90
2332150 ..... 022802-000200 K30F .................. O89
2332153 ..... 022804-000030 K30F ............O88–89
2332154 ..... 022804-000035 K30F ............O88–89
Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 9 11/2/15 10:33 AM
LViWID M 16 I d Z002 Z145 M i REBRAND O b 28 2015 3 09 PM
Z10 widia.com
Index by Order Number
Order No. Catalogue No. Page(s)
2332155 ..... 022804-000040 K30F ..........O88, O90
2332156 ..... 022804-000045 K30F ..........O88, O90
2332157 ..... 022804-000050 K30F ..........O88, O90
2332158 ..... 022804-000060 K30F ..........O88, O90
2332159 ..... 022804-000070 K30F ..........O88, O90
2332160 ..... 022804-000080 K30F ..........O88, O90
2332161 ..... 022804-000090 K30F ............O89–90
2332162 ..... 022804-000100 K30F ............O89–90
2332163 ..... 022804-000120 K30F ............O89–90
2332164 ..... 022804-000140 K30F ............O89–90
2332165 ..... 022804-000160 K30F ............O89–90
2332167 ..... 022804-000200 K30F ............O89–90
2332170 ..... 022806-000035 K30F .................. O88
2332171 ..... 022806-000040 K30F .................. O88
2332172 ..... 022806-000045 K30F .................. O88
2332173 ..... 022806-000050 K30F .................. O88
2332174 ..... 022806-000060 K30F .................. O88
2332175 ..... 022806-000070 K30F .................. O88
2332176 ..... 022806-000080 K30F .................. O88
2332177 ..... 022806-000090 K30F .................. O89
2332178 ..... 022806-000100 K30F .................. O89
2332179 ..... 022806-000120 K30F .................. O89
2332180 ..... 022806-000140 K30F .................. O89
2332181 ..... 022806-000160 K30F .................. O89
2332182 ..... 022806-000180 K30F ............O89–90
2332183 ..... 022806-000200 K30F .................. O89
2332360 ..... 022813-000060 K30F .................. O63
2332361 ..... 022813-000080 K30F .................. O63
2332362 ..... 022813-000100 K30F .................. O63
2332363 ..... 022813-000120 K30F .................. O63
2332364 ..... 022813-000160 K30F .................. O63
2332365 ..... 022813-000200 K30F .................. O63
2332366 ..... 022813-000250 K30F .................. O63
2332369 ..... 022814-000040 K10F ................ O135
2332370 ..... 022814-000050 K10F ................ O135
2332371 ..... 022814-000060 K10F ................ O135
2332372 ..... 022814-000080 K10F ................ O135
2332373 ..... 022814-000100 K10F ................ O135
2332374 ..... 022814-000120 K10F ................ O135
2332375 ..... 022814-000140 K10F ................ O135
2332376 ..... 022814-000160 K10F ................ O135
2332377 ..... 022814-000180 K10F ................ O135
2332378 ..... 022814-000200 K10F ................ O135
2332410 ..... 022817-000040 K10F ................ O135
2332411 ..... 022817-000050 K10F ................ O135
2332412 ..... 022817-000060 K10F ................ O135
2332413 ..... 022817-000080 K10F ................ O135
2332414 ..... 022817-000100 K10F ................ O135
2332415 ..... 022817-000120 K10F ................ O135
2332416 ..... 022817-000140 K10F ................ O135
2332417 ..... 022817-000160 K10F ................ O135
2332418 ..... 022817-000180 K10F ................ O135
2332419 ..... 022817-000200 K10F ................ O135
2332420 ..... 022818-000060 K30F .................. O64
2332421 ..... 022818-000080 K30F .................. O64
2332422 ..... 022818-000100 K30F .................. O64
2332423 ..... 022818-000120 K30F .................. O64
2332425 ..... 022818-000160 K30F .................. O64
2332427 ..... 022818-000200 K30F .................. O64
2332652 ..... 022846-000060 K30F .................. O65
2332653 ..... 022846-000080 K30F .................. O65
2332654 ..... 022846-000100 K30F .................. O65
2332655 ..... 022846-000120 K30F .................. O65
2332656 ..... 022846-000160 K30F .................. O65
2332657 ..... 022846-000200 K30F .................. O65
2332658 ..... 022846-000250 K30F .................. O65
2333055 ..... 023007-000004 K30F ................ O116
2333056 ..... 023007-000005 K30F ................ O116
2333057 ..... 023007-000006 K30F ................ O116
2333058 ..... 023007-000008 K30F ................ O116
2333060 ..... 023007-000010 K30F ................ O116
2333061 ..... 023007-000012 K30F ................ O116
2333064 ..... 023007-000015 K30F ................ O116
2333067 ..... 023007-000018 K30F ................ O116
2333069 ..... 023007-000020 K30F ................ O116
2333070 ..... 023007-000025 K30F ................ O116
2333071 ..... 023007-000030 K30F ................ O116
2333086 ..... 024101-000060 PKD ................. O138
2333087 ..... 024101-000080 PKD ................. O138
2333088 ..... 024101-000100 PKD ................. O138
2333099 ..... 024111-000020 K10F-DIA ........... O98
2333100 ..... 024111-000030 K10F-DIA ........... O98
2333101 ..... 024111-000040 K10F-DIA ........... O98
2333102 ..... 024111-000050 K10F-DIA ........... O98
2333103 ..... 024111-000060 K10F-DIA ........... O98
2333104 ..... 024111-000080 K10F-DIA ........... O98
2333105 ..... 024111-000100 K10F-DIA ........... O98
2333106 ..... 024111-000120 K10F-DIA ........... O98
2333112 ..... 024112-006005 K10F-DIA ........... O97
2333113 ..... 024112-008010 K10F-DIA ........... O97
2333114 ..... 024112-010020 K10F-DIA ........... O97
2333138 ..... 026621-000080 CERMET ............. O96
2333140 ..... 026621-000120 CERMET ............. O96
2333143 ..... 026621-000160 CERMET ............. O96
2333145 ..... 026621-000200 CERMET ............. O96
2335347 ..... 322801-000020 K30F-TICN ......... O88
2335348 ..... 322801-000025 K30F-TICN ......... O88
2335349 ..... 322801-000030 K30F-TICN ......... O88
2335350 ..... 322801-000035 K30F-TICN ......... O88
2335351 ..... 322801-000040 K30F-TICN ......... O88
2335352 ..... 322801-000045 K30F-TICN ......... O88
2335353 ..... 322801-000050 K30F-TICN ......... O88
2335354 ..... 322801-000060 K30F-TICN ......... O88
2335355 ..... 322801-000070 K30F-TICN ......... O88
2335356 ..... 322801-000080 K30F-TICN ......... O88
2335357 ..... 322801-000090 K30F-TICN ......... O89
2335358 ..... 322801-000100 K30F-TICN ......... O89
2335360 ..... 322801-000120 K30F-TICN ......... O89
2335361 ..... 322801-000140 K30F-TICN ......... O89
2335362 ..... 322801-000160 K30F-TICN ...O89–90
2335363 ..... 322801-000180 K30F-TICN ...O89–90
2335364 ..... 322801-000200 K30F-TICN ......... O89
2335365 ..... 322802-000020 K30F-TICN ......... O88
2335366 ..... 322802-000025 K30F-TICN ......... O88
2335368 ..... 322802-000030 K30F-TICN ......... O88
2335369 ..... 322802-000035 K30F-TICN ......... O88
2335370 ..... 322802-000040 K30F-TICN ......... O88
2335371 ..... 322802-000045 K30F-TICN ......... O88
2335372 ..... 322802-000050 K30F-TICN ......... O88
2335374 ..... 322802-000060 K30F-TICN ......... O88
2335376 ..... 322802-000070 K30F-TICN ......... O88
2335378 ..... 322802-000080 K30F-TICN ......... O88
2335379 ..... 322802-000090 K30F-TICN ......... O89
2335381 ..... 322802-000100 K30F-TICN ......... O89
2335383 ..... 322802-000120 K30F-TICN ......... O89
2335384 ..... 322802-000140 K30F-TICN ......... O89
2335385 ..... 322802-000160 K30F-TICN ......... O89
2335386 ..... 322802-000180 K30F-TICN ......... O89
2335387 ..... 322802-000200 K30F-TICN ......... O89
2335388 ..... 322804-000030 K30F-TICN ......... O88
2335389 ..... 322804-000035 K30F-TICN ......... O88
2335390 ..... 322804-000040 K30F-TICN ......... O88
2335391 ..... 322804-000045 K30F-TICN ......... O88
2335392 ..... 322804-000050 K30F-TICN ......... O88
2335393 ..... 322804-000060 K30F-TICN ......... O88
2335394 ..... 322804-000070 K30F-TICN ......... O88
2335395 ..... 322804-000080 K30F-TICN ......... O88
2335396 ..... 322804-000090 K30F-TICN ......... O89
2335397 ..... 322804-000100 K30F-TICN ......... O89
2335398 ..... 322804-000120 K30F-TICN ......... O89
2335399 ..... 322804-000140 K30F-TICN ......... O89
2335400 ..... 322804-000160 K30F-TICN ......... O89
2335401 ..... 322804-000180 K30F-TICN ......... O89
2335402 ..... 322804-000200 K30F-TICN ......... O89
2335403 ..... 322806-000030 K30F-TICN ......... O88
2335404 ..... 322806-000035 K30F-TICN ......... O88
2335406 ..... 322806-000040 K30F-TICN ......... O88
2335407 ..... 322806-000045 K30F-TICN ......... O88
2335408 ..... 322806-000050 K30F-TICN ......... O88
2335409 ..... 322806-000060 K30F-TICN ......... O88
2335410 ..... 322806-000070 K30F-TICN ......... O88
2335411 ..... 322806-000080 K30F-TICN ......... O88
2335412 ..... 322806-000090 K30F-TICN ......... O89
2335413 ..... 322806-000100 K30F-TICN ......... O89
2335415 ..... 322806-000120 K30F-TICN ......... O89
2335417 ..... 322806-000140 K30F-TICN ......... O89
2335420 ..... 322806-000160 K30F-TICN ......... O89
2335421 ..... 322806-000180 K30F-TICN ......... O89
2335422 ..... 322806-000200 K30F-TICN ......... O89
2336740 ..... 323001-000020 K30F-TICN ............P4
2336747 ..... 323001-000030 K30F-TICN ............P4
2336753 ..... 323001-000040 K30F-TICN ............P4
2336759 ..... 323001-000050 K30F-TICN ............P4
2336765 ..... 323001-000060 K30F-TICN ............P4
2336771 ..... 323001-000080 K30F-TICN ............P4
2336777 ..... 323001-000100 K30F-TICN ............P4
2336783 ..... 323001-000120 K30F-TICN ............P4
2341532 ..... 422801-000020 K30F-DCF .......... O89
2341534 ..... 422801-000025 K30F-DCF .......... O89
2341536 ..... 422801-000030 K30F-DCF .......... O89
2341538 ..... 422801-000035 K30F-DCF .......... O89
2341540 ..... 422801-000040 K30F-DCF .......... O90
2341542 ..... 422801-000045 K30F-DCF .......... O90
2341544 ..... 422801-000050 K30F-DCF .......... O90
2341546 ..... 422801-000060 K30F-DCF .......... O90
2341548 ..... 422801-000070 K30F-DCF .......... O90
2341550 ..... 422801-000080 K30F-DCF .......... O90
2341553 ..... 422801-000090 K30F-DCF .......... O90
2341555 ..... 422801-000100 K30F-DCF .......... O90
2341557 ..... 422801-000120 K30F-DCF .......... O90
2341559 ..... 422801-000140 K30F-DCF .......... O90
2341561 ..... 422801-000160 K30F-DCF .......... O90
2341562 ..... 422801-000180 K30F-DCF .......... O90
2341564 ..... 422801-000200 K30F-DCF .......... O90
2341566 ..... 422802-000020 K30F-DCF .......... O89
2341568 ..... 422802-000025 K30F-DCF .......... O89
2341570 ..... 422802-000030 K30F-DCF .......... O89
2341573 ..... 422802-000035 K30F-DCF .......... O89
2341575 ..... 422802-000040 K30F-DCF .......... O90
2341577 ..... 422802-000045 K30F-DCF .......... O90
2341579 ..... 422802-000050 K30F-DCF .......... O90
2341581 ..... 422802-000060 K30F-DCF .......... O90
2341583 ..... 422802-000070 K30F-DCF .......... O90
2341587 ..... 422802-000080 K30F-DCF .......... O90
2341589 ..... 422802-000090 K30F-DCF .......... O90
2341591 ..... 422802-000100 K30F-DCF .......... O90
2341593 ..... 422802-000120 K30F-DCF .......... O90
2341595 ..... 422802-000140 K30F-DCF .......... O90
2341597 ..... 422802-000160 K30F-DCF .......... O90
2341599 ..... 422802-000180 K30F-DCF .......... O90
2341601 ..... 422802-000200 K30F-DCF .......... O90
2341603 ..... 422804-000030 K30F-DCF .......... O89
2341606 ..... 422804-000035 K30F-DCF .......... O89
2341608 ..... 422804-000040 K30F-DCF .......... O90
2341610 ..... 422804-000045 K30F-DCF .......... O90
2341612 ..... 422804-000050 K30F-DCF .......... O90
2341614 ..... 422804-000060 K30F-DCF .......... O90
2341616 ..... 422804-000070 K30F-DCF .......... O90
2341618 ..... 422804-000080 K30F-DCF .......... O90
2341620 ..... 422804-000090 K30F-DCF .......... O90
2341622 ..... 422804-000100 K30F-DCF .......... O90
2341624 ..... 422804-000120 K30F-DCF .......... O90
2341626 ..... 422804-000140 K30F-DCF .......... O90
2341628 ..... 422804-000160 K30F-DCF .......... O90
2341630 ..... 422804-000180 K30F-DCF .......... O90
2341632 ..... 422804-000200 K30F-DCF .......... O90
2341634 ..... 422806-000030 K30F-DCF .......... O89
2341636 ..... 422806-000035 K30F-DCF .......... O89
2341638 ..... 422806-000040 K30F-DCF .......... O90
2341640 ..... 422806-000045 K30F-DCF .......... O90
2341642 ..... 422806-000050 K30F-DCF .......... O90
2341644 ..... 422806-000060 K30F-DCF .......... O90
2341646 ..... 422806-000070 K30F-DCF .......... O90
2341648 ..... 422806-000080 K30F-DCF .......... O90
2341650 ..... 422806-000090 K30F-DCF .......... O90
2341653 ..... 422806-000100 K30F-DCF .......... O90
2341657 ..... 422806-000120 K30F-DCF .......... O90
2341659 ..... 422806-000140 K30F-DCF .......... O90
2341661 ..... 422806-000160 K30F-DCF .......... O90
2341663 ..... 422806-000180 K30F-DCF .......... O90
2341665 ..... 422806-000200 K30F-DCF .......... O90
2342043 ..... 422813-000060 K30F-DCF .......... O63
2342045 ..... 422813-000080 K30F-DCF .......... O63
2342047 ..... 422813-000100 K30F-DCF .......... O63
2342049 ..... 422813-000120 K30F-DCF .......... O63
2342051 ..... 422813-000160 K30F-DCF .......... O63
2342053 ..... 422813-000200 K30F-DCF .......... O63
2342055 ..... 422813-000250 K30F-DCF .......... O63
2342154 ..... 422818-000060 K30F-DCF .......... O64
2342156 ..... 422818-000080 K30F-DCF .......... O64
2342158 ..... 422818-000100 K30F-DCF .......... O64
2342160 ..... 422818-000120 K30F-DCF .......... O64
2342162 ..... 422818-000160 K30F-DCF .......... O64
2342164 ..... 422818-000200 K30F-DCF .......... O64
2342270 ..... 422822-000060 K30F-DCHP ....... O93
2342272 ..... 422822-000080 K30F-DCHP ....... O93
2342274 ..... 422822-000100 K30F-DCHP ....... O93
2342276 ..... 422822-000120 K30F-DCHP ....... O93
2342280 ..... 422822-000160 K30F-DCHP ....... O93
2342282 ..... 422822-000180 K30F-DCHP ....... O93
2342284 ..... 422822-000200 K30F-DCHP ....... O93
2342286 ..... 422822-000250 K30F-DCHP ....... O93
2342341 ..... 422826-000060 K30F-DCHP ....... O93
2342343 ..... 422826-000080 K30F-DCHP ....... O93
2342345 ..... 422826-000100 K30F-DCHP ....... O93
2342347 ..... 422826-000120 K30F-DCHP ....... O93
2342351 ..... 422826-000160 K30F-DCHP ....... O93
2342353 ..... 422826-000180 K30F-DCHP ....... O93
2342355 ..... 422826-000200 K30F-DCHP ....... O93
2342357 ..... 422826-000250 K30F-DCHP ....... O93
2342360 ..... 422827-000060 K30F-DCHP ....... O94
2342362 ..... 422827-000080 K30F-DCHP ....... O94
2342364 ..... 422827-000100 K30F-DCHP ....... O94
2342366 ..... 422827-000120 K30F-DCHP ....... O94
Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 10 11/2/15 10:33 AM
LViWID M 16 I d Z002 Z145 M i REBRANDO b 28 20153 09PM
Z11
widia.com
Index by Order Number
Order No. Catalogue No. Page(s)
2342368 ..... 422827-000160 K30F-DCHP ....... O94
2342370 ..... 422827-000200 K30F-DCHP ....... O94
2342372 ..... 422827-000250 K30F-DCHP ....... O94
2342388 ..... 422831-006005 K10UF-DCHP ... O192
2342390 ..... 422831-008005 K10UF-DCHP ... O192
2342392 ..... 422831-010005 K10UF-DCHP ... O192
2342394 ..... 422831-012010 K10UF-DCHP ... O192
2342396 ..... 422831-016010 K10UF-DCHP ... O192
2342398 ..... 422831-020010 K10UF-DCHP ... O192
2342400 ..... 422831-025015 K10UF-DCHP ... O192
2342495 ..... 422837-006005 K10UF-DCHP ... O192
2342497 ..... 422837-008005 K10UF-DCHP ... O192
2342499 ..... 422837-010005 K10UF-DCHP ... O192
2342501 ..... 422837-012010 K10UF-DCHP ... O192
2342502 ..... 422837-016010 K10UF-DCHP ... O192
2342505 ..... 422837-020010 K10UF-DCHP ... O192
2342676 ..... 422846-000060 K30F-DCF .......... O65
2342678 ..... 422846-000080 K30F-DCF .......... O65
2342680 ..... 422846-000100 K30F-DCF .......... O65
2342684 ..... 422846-000120 K30F-DCF .......... O65
2342686 ..... 422846-000160 K30F-DCF .......... O65
2342688 ..... 422846-000200 K30F-DCF .......... O65
2342690 ..... 422846-000250 K30F-DCF .......... O65
2343169 ..... 422868-000060 K10UF-DCHP ... O177
2343171 ..... 422868-000080 K10UF-DCHP ... O177
2343173 ..... 422868-000100 K10UF-DCHP ... O177
2343179 ..... 422869-000010 K10UF-DCHP ... O177
2343183 ..... 422869-000020 K10UF-DCHP ... O177
2343186 ..... 422869-000030 K10UF-DCHP ... O177
2343188 ..... 422869-000040 K10UF-DCHP ... O177
2343190 ..... 422869-000050 K10UF-DCHP ... O177
2343192 ..... 422869-000060 K10UF-DCHP ... O177
2343194 ..... 422869-000080 K10UF-DCHP ... O177
2343196 ..... 422869-000100 K10UF-DCHP ... O177
2343198 ..... 422869-000120 K10UF-DCHP ... O177
2343200 ..... 422869-000160 K10UF-DCHP ... O177
2343202 ..... 422870-000020 K10UF-DCHP ... O178
2343204 ..... 422870-000030 K10UF-DCHP ... O178
2343206 ..... 422870-000040 K10UF-DCHP ... O178
2343208 ..... 422870-000050 K10UF-DCHP ... O178
2343210 ..... 422870-000060 K10UF-DCHP ... O178
2343212 ..... 422870-000080 K10UF-DCHP ... O178
2343214 ..... 422870-000100 K10UF-DCHP ... O178
2343216 ..... 422870-000120 K10UF-DCHP ... O178
2343218 ..... 422871-030075 K10UF-DCHP ... O190
2343220 ..... 422871-030100 K10UF-DCHP ... O190
2343222 ..... 422871-040075 K10UF-DCHP ... O190
2343224 ..... 422871-040100 K10UF-DCHP ... O190
2343227 ..... 422871-050075 K10UF-DCHP ... O190
2343229 ..... 422871-050100 K10UF-DCHP ... O190
2343230 ..... 422871-060075 K10UF-DCHP ... O190
2343233 ..... 422871-060100 K10UF-DCHP ... O190
2343235 ..... 422871-080100 K10UF-DCHP ... O190
2343237 ..... 422871-080150 K10UF-DCHP ... O190
2343239 ..... 422871-100100 K10UF-DCHP ... O190
2343241 ..... 422871-100150 K10UF-DCHP ... O190
2343265 ..... 422873-050100 K10UF-DCHP ... O179
2343269 ..... 422873-060100 K10UF-DCHP ... O179
2343275 ..... 422873-100100 K10UF-DCHP ... O179
2343277 ..... 422873-100150 K10UF-DCHP ... O179
2343303 ..... 422875-002005 K10UF-DCHP ... O173
2343305 ..... 422875-003005 K10UF-DCHP ... O173
2343307 ..... 422875-004005 K10UF-DCHP ... O173
2343309 ..... 422875-005005 K10UF-DCHP ... O173
2343311 ..... 422875-006010 K10UF-DCHP ... O173
2343313 ..... 422875-008020 K10UF-DCHP ... O173
2343315 ..... 422875-010030 K10UF-DCHP ... O173
2343317 ..... 422875-012040 K10UF-DCHP ... O173
2343319 ..... 422875-002003 K10UF-DCHP ... O173
2343321 ..... 422875-003010 K10UF-DCHP ... O173
2343323 ..... 422875-004010 K10UF-DCHP ... O173
2343325 ..... 422875-005010 K10UF-DCHP ... O173
2343327 ..... 422875-006005 K10UF-DCHP ... O173
2343329 ..... 422875-008010 K10UF-DCHP ... O173
2343331 ..... 422875-010020 K10UF-DCHP ... O173
2343333 ..... 422875-012030 K10UF-DCHP ... O173
2343352 ..... 423001-000020 K30F-DCF .............P4
2343354 ..... 423001-000030 K30F-DCF .............P4
2343356 ..... 423001-000040 K30F-DCF .............P4
2343358 ..... 423001-000050 K30F-DCF .............P4
2343360 ..... 423001-000060 K30F-DCF .............P4
2343362 ..... 423001-000080 K30F-DCF .............P4
2343364 ..... 423001-000100 K30F-DCF .............P4
2343366 ..... 423001-000120 K30F-DCF .............P4
2343368 ..... 423007-000004 K30F-DCHP ..... O116
2343370 ..... 423007-000005 K30F-DCHP ..... O116
2343372 ..... 423007-000006 K30F-DCHP ..... O116
2343374 ..... 423007-000008 K30F-DCHP ..... O116
2343376 ..... 423007-000010 K30F-DCHP ..... O116
2343378 ..... 423007-000012 K30F-DCHP ..... O116
2343380 ..... 423007-000015 K30F-DCHP ..... O116
2343382 ..... 423007-000018 K30F-DCHP ..... O116
2343384 ..... 423007-000020 K30F-DCHP ..... O116
2343386 ..... 423007-000025 K30F-DCHP ..... O116
2343388 ..... 423007-000030 K30F-DCHP ..... O116
2343490 ..... 423034-000005 K10UF-DCHP ... O164
2343492 ..... 423034-000006 K10UF-DCHP ... O164
2343494 ..... 423034-000008 K10UF-DCHP ... O164
2343496 ..... 423034-000010 K10UF-DCHP ... O164
2343498 ..... 423034-000012 K10UF-DCHP ... O164
2343500 ..... 423034-000015 K10UF-DCHP ... O164
2343502 ..... 423034-000020 K10UF-DCHP ... O164
2343504 ..... 423034-000025 K10UF-DCHP ... O164
2343506 ..... 423034-000030 K10UF-DCHP ... O164
2343508 ..... 423036-000060 K30F-DCF .............P8
2343510 ..... 423036-000080 K30F-DCF .............P8
2343512 ..... 423036-000100 K30F-DCF .............P8
2343514 ..... 423038-000020 K30F-DCHP ..........P7
2343516 ..... 423038-000030 K30F-DCHP ..........P7
2343519 ..... 423038-000040 K30F-DCHP ..........P7
2343521 ..... 423038-000050 K30F-DCHP ..........P7
2343523 ..... 423038-000060 K30F-DCHP ..........P7
2343525 ..... 423038-000080 K30F-DCHP ..........P7
2343527 ..... 423038-000100 K30F-DCHP ..........P7
2343529 ..... 423038-000120 K30F-DCHP ..........P7
2343531 ..... 423039-000020 K30F-DCHP ..........P7
2343533 ..... 423039-000030 K30F-DCHP ..........P7
2343535 ..... 423039-000040 K30F-DCHP ..........P7
2343537 ..... 423039-000050 K30F-DCHP ..........P7
2343539 ..... 423039-000060 K30F-DCHP ..........P7
2343541 ..... 423039-000080 K30F-DCHP ..........P7
2343543 ..... 423039-000100 K30F-DCHP ..........P7
2343545 ..... 423039-000120 K30F-DCHP ..........P7
2343548 ..... 423047-000020 K30F-DCHP ..........P6
2343550 ..... 423047-000030 K30F-DCHP ..........P6
2343552 ..... 423047-000040 K30F-DCHP ..........P6
2343554 ..... 423047-000050 K30F-DCHP ..........P6
2343556 ..... 423047-000060 K30F-DCHP ..........P6
2343558 ..... 423047-000080 K30F-DCHP ..........P6
2343560 ..... 423047-000100 K30F-DCHP ..........P6
2343562 ..... 423047-000120 K30F-DCHP ..........P6
2343564 ..... 423048-000020 K30F-DCHP ..........P6
2343566 ..... 423048-000030 K30F-DCHP ..........P6
2343568 ..... 423048-000040 K30F-DCHP ..........P6
2343570 ..... 423048-000050 K30F-DCHP ..........P6
2343572 ..... 423048-000060 K30F-DCHP ..........P6
2343574 ..... 423048-000080 K30F-DCHP ..........P6
2343576 ..... 423048-000100 K30F-DCHP ..........P6
2343579 ..... 423048-000120 K30F-DCHP ..........P6
2345784 ..... 022806-000030 K30F .................. O88
2387228 ..... 7F1-0750T ................................... U30
2388660 ..... SKRN1203M0 K9 .......................... C45
2397765 ..... KLM68L25IP ...............C8–10, C12–15
2397767 ..... KMSP625IP .................C8–10, C12–15
2397770 ..... KMSP39IP ............................... C9, C19
2421384 ..... SSY5T K9 .........................F70–72, F74
2421386 ..... SSA5T ..............................F70–72, F74
2424550 ..... M270BD010A12L140C W.......... M105
2424587 ..... M270BD012A12L145C W.......... M105
2424634 ..... M270BD016A16L155C W.......... M105
2429601 ..... 514.112........................................ C61
2429602 ..... 514.118..................C23, C26–30, C60
2429633 ..... 514.122......................C60, C104–105
2429634 ..... 514.123...................C20–22, C25–30,
C60–61, C104–105
2429636 ..... 514.125...................C20–22, C25–27,
C60, C104–105
2429637 ..... 514.128..........................C23–24, C29
2429638 ..... 514.133................... C20–22, C25–27
2429639 ..... 514.138.................................. C25–27
2436494 ..... 050227-000200 K10F ................... W9
2436871 ..... 050227-000300 K10F ................... W9
2436872 ..... 050227-000400 K10F ................... W9
2436913 ..... 050227-000500 K10F ................... W9
2436914 ..... 050227-000600 K10F ................... W9
2436916 ..... 050227-000800 K10F ................... W9
2436919 ..... 050227-001000 K10F ................... W9
2436922 ..... 050227-001200 K10F ................... W9
2436946 ..... 050227-001400 K10F ................... W9
2437425 ..... 050271-000500 K10F ................. W10
2437426 ..... 050271-000600 K10F ................. W10
2437428 ..... 050271-000800 K10F ................. W10
2437430 ..... 050271-001000 K10F ................. W10
2437432 ..... 050271-001200 K10F ................. W10
2437468 ..... 050271-001400 K10F ................. W10
2437472 ..... 050270-000500 K10F ................. W14
2437523 ..... 050270-000600 K10F ................. W14
2437525 ..... 050270-000800 K10F ................. W14
2437526 ..... 050270-001000 K10F ................. W14
2437527 ..... 050270-001200 K10F ................. W14
2437529 ..... 050270-001400 K10F ................. W14
2441162 ..... 450227-000200 K10F-DCFD ......... W9
2441253 ..... 450227-000300 K10F-DCFD ......... W9
2441254 ..... 450227-000400 K10F-DCFD ......... W9
2441256 ..... 450227-000500 K10F-DCFD ......... W9
2441257 ..... 450227-000600 K10F-DCFD ......... W9
2441260 ..... 450227-000800 K10F-DCFD ......... W9
2441261 ..... 450227-001000 K10F-DCFD ......... W9
2441284 ..... 450227-001200 K10F-DCFD ......... W9
2441285 ..... 450227-001400 K10F-DCFD ......... W9
2441337 ..... 450270-000500 K10F-DCFD ....... W14
2441339 ..... 450270-000600 K10F-DCFD ....... W14
2441341 ..... 450270-000800 K10F-DCFD ....... W14
2441342 ..... 450270-001000 K10F-DCFD ....... W14
2441353 ..... 450270-001200 K10F-DCFD ....... W14
2441354 ..... 450270-001400 K10F-DCFD ....... W14
2441380 ..... 450271-000500 K10F-DCFD ....... W10
2441381 ..... 450271-000600 K10F-DCFD ....... W10
2441453 ..... 450271-000800 K10F-DCFD ....... W10
2441455 ..... 450271-001000 K10F-DCFD ....... W10
2441457 ..... 450271-001200 K10F-DCFD ....... W10
2441494 ..... 450271-001400 K10F-DCFD ....... W10
2446025 ..... 050222-000200 K10F ................. W13
2446029 ..... 050222-000300 K10F ................. W13
2446031 ..... 050222-000400 K10F ................. W13
2446371 ..... 450222-000200 K10F-DCFD ....... W13
2446372 ..... 450222-000300 K10F-DCFD ....... W13
2446415 ..... 450222-000400 K10F-DCFD ....... W13
2460213 ..... 56-1015 ................................ U40–41,
U44–45
2495913 ..... 706002001RT TIALN-RT1 ........... O189
2495914 ..... 706002501RT TIALN-RT1 ........... O189
2495915 ..... 706003002RT TIALN-RT1 ........... O189
2495916 ..... 706004002RT TIALN-RT1 ........... O189
2495917 ..... 706005002RT TIALN-RT1 ........... O189
2495918 ..... 706006004RT TIALN-RT1 ........... O189
2495919 ..... 706008004RT TIALN-RT1 ........... O189
2495920 ..... 706010005RT TIALN-RT1 ........... O189
2495921 ..... 706012006RT TIALN-RT1 ........... O189
2495994 ..... 706101001RT TIALN-RT1 ........... O175
2495995 ..... 706102001RT TIALN-RT1 ........... O175
2495996 ..... 706102501RT TIALN-RT1 ........... O175
2495997 ..... 706103002RT TIALN-RT1 ........... O175
2495998 ..... 706104002RT TIALN-RT1 ........... O175
2495999 ..... 706105002RT TIALN-RT1 ........... O175
2496000 ..... 706106004RT TIALN-RT1 ........... O175
2496001 ..... 706108004RT TIALN-RT1 ........... O175
2496002 ..... 706110005RT TIALN-RT1 ........... O175
2496023 ..... 706112006RT TIALN-RT1 ........... O175
2498713 ..... 123567320 TN7535 ......................E97
2498714 ..... 123567330 TN7535 ......................E97
2498715 ..... 123567340 TN7535 ......................E97
2498716 ..... 123567350 TN7535 ......................E97
2498717 ..... 123567230 TN7535 ......................E98
2498718 ..... 123567231 TN7535 ......................E98
2498719 ..... 123567240 TN7535 ......................E98
2498721 ..... 123567420 TN7535 ......................E99
2498722 ..... 123567430 TN7535 ......................E99
2498723 ..... 123567440 TN7535 ......................E99
2498724 ..... 123567450 TN7535 ......................E99
2498725 ..... 123567320 TN7525 ......................E97
2498727 ..... 123567340 TN7525 ......................E97
2498728 ..... 123567350 TN7525 ......................E97
2498729 ..... 123567230 TN7525 ......................E98
2498730 ..... 123567231 TN7525 ......................E98
2498731 ..... 123567240 TN7525 ......................E98
2498733 ..... 123567420 TN7525 ......................E99
2498734 ..... 123567430 TN7525 ......................E99
2498735 ..... 123567440 TN7525 ......................E99
2498736 ..... 123567450 TN7525 ......................E99
2499567 ..... 750503002LT TIALN-LT1 ............ O180
2499568 ..... 750504002LT TIALN-LT1 ............ O180
2499569 ..... 750505002LT TIALN-LT1 ............ O180
2499570 ..... 754503002LT TIALN-LT1 ............ O180
2499571 ..... 754504002LT TIALN-LT1 ............ O180
2499572 ..... 754505002LT TIALN-LT1 ............ O180
2510324 ..... 49N906002.. UNCOATED ............ O142
2510325 ..... 49N908003.. UNCOATED ............ O142
2510326 ..... 49N910004.. UNCOATED ............ O142
2510327 ..... 49N912005.. UNCOATED ............ O142
2510328 ..... 49N916006.. UNCOATED ............ O142
2510329 ..... 49N920007.. UNCOATED ............ O142
2511344 ..... M4000CA-HP06 ........................... H73
2526391 ..... KMSP825IP .....................C9, C12, C14
Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 11 11/2/15 10:33 AM
LViWID M 16 I d Z002 Z145 M i REBRAND O b 28 2015 3 09 PM
Z12 widia.com
Index by Order Number
Order No. Catalogue No. Page(s)
2526442 ..... KLM81025IP ...................C9, C12, C14
2526554 ..... M40403 ........................................ R11
2539334 ..... CM184LP ...............................E75, F26
2539335 ..... CM185LP ...............................E75, F26
2540317 ..... 759503002LT TIALN-LT1 ............ O182
2540318 ..... 759503012LT TIALN-LT1 ............ O182
2540319 ..... 759504002LT TIALN-LT1 ............ O182
2540320 ..... 759504012LT TIALN-LT1 ............ O182
2540321 ..... 759505002LT TIALN-LT1 ............ O182
2540322 ..... 759505012LT TIALN-LT1 ............ O182
2541273 ..... 759506022LT TIALN-LT1 ............ O182
2541274 ..... 759506032LT TIALN-LT1 ............ O182
2541275 ..... 759508023LT TIALN-LT1 ............ O182
2541276 ..... 759508033LT TIALN-LT1 ............ O182
2541277 ..... 759510024LT TIALN-LT1 ............ O183
2541278 ..... 759510034LT TIALN-LT1 ............ O183
2541279 ..... 759512025LT TIALN-LT1 ............ O183
2541280 ..... 759512035LT TIALN-LT1 ............ O183
2541282 ..... 759516036LT TIALN-LT1 ............ O183
2541293 ..... 759520027LT TIALN-LT1 ............ O183
2541622 ..... 56-1585 ................................ U40–42,
U44–45
2544367 ..... 75N503022LT TIALN-LT1 ............O184
2544368 ..... 75N503042LT TIALN-LT1 ............O184
2544369 ..... 75N504022LT TIALN-LT1 ............O184
2544370 ..... 75N504042LT TIALN-LT1 ............O184
2544371 ..... 75N505022LT TIALN-LT1 ............O184
2544372 ..... 75N505042LT TIALN-LT1 ............O184
2544443 ..... 75N506022LT TIALN-LT1 ............O184
2544444 ..... 75N506042LT TIALN-LT1 ............O184
2544445 ..... 75N506062LT TIALN-LT1 ............O184
2544446 ..... 75N506082LT TIALN-LT1 ............O184
2544447 ..... 75N508023LT TIALN-LT1 ............O184
2544448 ..... 75N508033LT TIALN-LT1 ............O184
2544449 ..... 75N508043LT TIALN-LT1 ............O184
2544450 ..... 75N508053LT TIALN-LT1 ............O184
2544452 ..... 75N510024LT TIALN-LT1 ............O184
2544483 ..... 75N510034LT TIALN-LT1 ............O184
2544484 ..... 75N510044LT TIALN-LT1 ............O184
2544485 ..... 75N510054LT TIALN-LT1 ............O185
2544486 ..... 75N512025LT TIALN-LT1 ............O185
2544487 ..... 75N512035LT TIALN-LT1 ............O185
2544488 ..... 75N512045LT TIALN-LT1 ............O185
2544489 ..... 75N512055LT TIALN-LT1 ............O185
2544490 ..... 75N516026LT TIALN-LT1 ............O185
2544491 ..... 75N516046LT TIALN-LT1 ............O185
2544492 ..... 75N520027LT TIALN-LT1 ............O185
2544523 ..... 75N520047LT TIALN-LT1 ............O185
2544524 ..... 75N525028LT TIALN-LT1 ............O185
2544525 ..... 75N525048LT TIALN-LT1 ............O185
2544526 ..... 75N806002RT TIALN-RT1 ........... O186
2544527 ..... 75N808003RT TIALN-RT1 ........... O186
2544528 ..... 75N810004RT TIALN-RT1 ........... O186
2544529 ..... 75N812005RT TIALN-RT1 ........... O186
2544530 ..... 75N203022RT TIALN-RT1 ........... O172
2544735 ..... 75N203042RT TIALN-RT1 ........... O172
2544736 ..... 75N203062RT TIALN-RT1 ........... O172
2544737 ..... 75N204022RT TIALN-RT1 ........... O172
2544738 ..... 75N204042RT TIALN-RT1 ........... O172
2544739 ..... 75N204062RT TIALN-RT1 ........... O172
2544740 ..... 75N205022RT TIALN-RT1 ........... O172
2544741 ..... 75N205042RT TIALN-RT1 ........... O172
2544742 ..... 75N206032RT TIALN-RT1 ........... O172
2545163 ..... 75N206042RT TIALN-RT1 ........... O172
2545164 ..... 75N206052RT TIALN-RT1 ........... O172
2545166 ..... 75N206062RT TIALN-RT1 ........... O172
2545167 ..... 75N206072RT TIALN-RT1 ........... O172
2545168 ..... 75N208023RT TIALN-RT1 ........... O172
2545169 ..... 75N208043RT TIALN-RT1 ........... O172
2545170 ..... 75N208063RT TIALN-RT1 ........... O172
2545171 ..... 75N210024RT TIALN-RT1 ........... O172
2545172 ..... 75N210034RT TIALN-RT1 ........... O172
2545183 ..... 75N210044RT TIALN-RT1 ........... O172
2545184 ..... 75N210064RT TIALN-RT1 ........... O172
2545185 ..... 75N212025RT TIALN-RT1 ........... O172
2545186 ..... 75N212035RT TIALN-RT1 ........... O172
2545187 ..... 75N212045RT TIALN-RT1 ........... O172
2545188 ..... 75N212055RT TIALN-RT1 ........... O172
2545189 ..... 75N212065RT TIALN-RT1 ........... O172
2545190 ..... 70N101001RT TIALN-RT1 ........... O176
2545191 ..... 70N101501RT TIALN-RT1 ........... O176
2545192 ..... 70N102002RT TIALN-RT1 ........... O176
2545213 ..... 70N103002RT TIALN-RT1 ........... O176
2545214 ..... 70N104002RT TIALN-RT1 ........... O176
2545215 ..... 70N105002RT TIALN-RT1 ........... O176
2545216 ..... 70N106002RT TIALN-RT1 ........... O176
2545217 ..... 70N108003RT TIALN-RT1 ........... O176
2545218 ..... 70N110004RT TIALN-RT1 ........... O176
2545219 ..... 70N112005RT TIALN-RT1 ........... O176
2545563 ..... 477804002MT ALTIN-MT ................ O6
2545564 ..... 477805002MT ALTIN-MT ................ O6
2545565 ..... 477806002MT ALTIN-MT ................ O6
2545570 ..... 477807003MT ALTIN-MT ................ O6
2545603 ..... 477808003MT ALTIN-MT ................ O6
2545605 ..... 477809004MT ALTIN-MT ................ O6
2559301 ..... CNMG190616 HK1500 ................. B37
2559317 ..... CNMG190616 THM ....................... B37
2559352 ..... CNMG190612 HK1500 ................. B37
2559382 ..... CNMG190612 THM ....................... B37
2559474 ..... CNMG120408 HK1500 ................. B37
2559538 ..... CNMG120404 HK1500 ................. B37
2559561 ..... CNMG120404 THM ....................... B37
2559805 ..... CNMA120412 HK1500 ................. B36
2559834 ..... CNMA120408 HK1500 ................. B36
2559864 ..... CNMA120404 HK1500 ................. B36
2559989 ..... SNMA120412 HK1500 ................. B71
2560009 ..... SNMA120408 HK1500 ................. B71
2560926 ..... CNMG12040422 TN2000 ............. B37
2561892 ..... SPUN190416 THM ........................ B80
2562359 ..... CCMT09T304 HK1500 .................. B30
2562499 ..... DCMT11T308MU TN2000 ............. B49
2562545 ..... CCMT09T304MU TN2000 ............. B33
2562755 ..... TPUN160308 HK1500................... B93
2563459 ..... DCMT11T308 HK1500 .................. B47
2563563 ..... DCMT11T304 HK1500 .................. B47
2563990 ..... CCMT09T308 HK1500 .................. B30
2564010 ..... CCMT090308 HK1500 .................. B30
2564044 ..... CCMT090304 HK1500 .................. B30
2564132 ..... CCMT060204 HK1500 .................. B30
2601245 ..... 477810004MT ALTIN-MT ................ O6
2601246 ..... 477812005MT ALTIN-MT ................ O6
2601248 ..... 477814014MT ALTIN-MT ................ O6
2601249 ..... 477816006MT ALTIN-MT ................ O6
2601250 ..... 477818018MT ALTIN-MT ................ O6
2601251 ..... 477820007MT ALTIN-MT ................ O6
2601252 ..... 477825008MT ALTIN-MT ................ O6
2604191 ..... 7F1-0756T ................................... U30
2605576 ..... 1N0M03002LJ ................................ Q8
2605577 ..... 1N0M04003LJ ................................ Q8
2605578 ..... 1N0M05003LJ ................................ Q8
2605579 ..... 1N0M06003LJ ................................ Q8
2605580 ..... 1N0M08004LJ ................................ Q8
2605581 ..... 1N0M10004LJ ................................ Q8
2605582 ..... 1N0M12005LJ ................................ Q8
2605583 ..... 1N0M14006LJ ................................ Q8
2605584 ..... 1N0M16006LJ ................................ Q8
2605585 ..... 1N0M18007LJ ................................ Q8
2605586 ..... 1N0M20007LJ ................................ Q8
2605587 ..... 1N0M22007LJ ................................ Q8
2605715 ..... 1N7706002CT ................................ Q9
2605716 ..... 1N7706002CW ............................... Q9
2605717 ..... 1N7708004CT ................................ Q9
2605718 ..... 1N7708004CW ............................... Q9
2605719 ..... 1N7710004CT ................................ Q9
2605720 ..... 1N7710004CW ............................... Q9
2605721 ..... 1N7712005CT ................................ Q9
2605722 ..... 1N7712005CW ............................... Q9
2605823 ..... 1N7714005CT ................................ Q9
2605824 ..... 1N7714005CW ............................... Q9
2605825 ..... 1N7716006CT ................................ Q9
2605826 ..... 1N7716006CW ............................... Q9
2605827 ..... 1N7718006CT ................................ Q9
2605828 ..... 1N7718006CW ............................... Q9
2605829 ..... 1N7720007CT ................................ Q9
2605830 ..... 1N7720007CW ............................... Q9
2605831 ..... 1N7722007CT ................................ Q9
2605832 ..... 1N7722007CW ............................... Q9
2605843 ..... 1N7725008CT ................................ Q9
2605844 ..... 1N7725008CW ............................... Q9
2605845 ..... 1N7730008CT ................................ Q9
2605846 ..... 1N7730008CW ............................... Q9
2627800 ..... 323002-000020 K30F-TICN ............P4
2627801 ..... 323002-000030 K30F-TICN ............P4
2627802 ..... 323002-000040 K30F-TICN ............P4
2627983 ..... 323002-000050 K30F-TICN ............P4
2627984 ..... 323002-000060 K30F-TICN ............P4
2627985 ..... 323002-000080 K30F-TICN ............P4
2627986 ..... 323002-000100 K30F-TICN ............P4
2627987 ..... 323002-000120 K30F-TICN ............P4
2627990 ..... 423002-000020 K30F-DCF .............P4
2628043 ..... 423002-000030 K30F-DCF .............P4
2628044 ..... 423002-000040 K30F-DCF .............P4
2628045 ..... 423002-000050 K30F-DCF .............P4
2628046 ..... 423002-000060 K30F-DCF .............P4
2628047 ..... 423002-000080 K30F-DCF .............P4
2628048 ..... 423002-000100 K30F-DCF .............P4
2628049 ..... 423002-000120 K30F-DCF .............P4
2628396 ..... 422820-000060 K30F-DCHP ....... O58
2628397 ..... 422820-000080 K30F-DCHP ....... O58
2628400 ..... 422820-000100 K30F-DCHP ....... O58
2628401 ..... 422820-000120 K30F-DCHP ....... O58
2628446 ..... 422820-000160 K30F-DCHP ....... O58
2628447 ..... 422820-000200 K30F-DCHP ....... O58
2628448 ..... 422820-000250 K30F-DCHP ....... O58
2628451 ..... 422824-000060 K30F-DCHP ....... O58
2628473 ..... 422824-000080 K30F-DCHP ....... O58
2628475 ..... 422824-000100 K30F-DCHP ....... O58
2628477 ..... 422824-000120 K30F-DCHP ....... O58
2628478 ..... 422824-000160 K30F-DCHP ....... O58
2628481 ..... 422824-000200 K30F-DCHP ....... O58
2628482 ..... 422824-000250 K30F-DCHP ....... O58
2628498 ..... 423037-000060 K30F-DCHP ..........P8
2628499 ..... 423037-000080 K30F-DCHP ..........P8
2628500 ..... 423037-000100 K30F-DCHP ..........P8
2628898 ..... 422876-004005 K10UF-DCHP ... O187
2629013 ..... 422876-004010 K10UF-DCHP ... O187
2629015 ..... 422876-005005 K10UF-DCHP ... O187
2629016 ..... 422876-005010 K10UF-DCHP ... O187
2629018 ..... 422876-006005 K10UF-DCHP ... O187
2629021 ..... 422876-006010 K10UF-DCHP ... O187
2629056 ..... 422876-008005 K10UF-DCHP ... O187
2629060 ..... 422876-008010 K10UF-DCHP ... O187
2629061 ..... 422876-008020 K10UF-DCHP ... O187
2629062 ..... 422876-010005 K10UF-DCHP ... O187
2629077 ..... 422876-010010 K10UF-DCHP ... O187
2629086 ..... 422876-010020 K10UF-DCHP ... O187
2629089 ..... 422876-012005 K10UF-DCHP ... O187
2629094 ..... 422876-012010 K10UF-DCHP ... O187
2629095 ..... 422876-012020 K10UF-DCHP ... O187
2629097 ..... 422876-012030 K10UF-DCHP ... O187
2629541 ..... 422875-008005 K10UF-DCHP ... O173
2629555 ..... 422875-008015 K10UF-DCHP ... O173
2629559 ..... 422875-010005 K10UF-DCHP ... O173
2629560 ..... 422875-010010 K10UF-DCHP ... O173
2629561 ..... 422875-012005 K10UF-DCHP ... O173
2629573 ..... 422875-012010 K10UF-DCHP ... O173
2630276 ..... 422878-006005 K10UF-DCHP ... O187
2630285 ..... 422878-008010 K10UF-DCHP ... O187
2630288 ..... 422878-008015 K10UF-DCHP ... O187
2630290 ..... 422878-008020 K10UF-DCHP ... O187
2630291 ..... 422878-010005 K10UF-DCHP ... O187
2630292 ..... 422878-010010 K10UF-DCHP ... O187
2630345 ..... 422878-010020 K10UF-DCHP ... O187
2630347 ..... 422878-012010 K10UF-DCHP ... O187
2630386 ..... 422878-012030 K10UF-DCHP ... O187
2630665 ..... 422150-000060 K30F-DCHP ....... O56
2630667 ..... 422150-000080 K30F-DCHP ....... O56
2630669 ..... 422150-000100 K30F-DCHP ....... O56
2630670 ..... 422150-000120 K30F-DCHP ....... O56
2630672 ..... 422150-000160 K30F-DCHP ....... O56
2630675 ..... 422150-000200 K30F-DCHP ....... O56
2630677 ..... 422150-000250 K30F-DCHP ....... O56
2630679 ..... 422152-000060 K30F-DCHP ....... O56
2630680 ..... 422152-000080 K30F-DCHP ....... O56
2630713 ..... 422152-000100 K30F-DCHP ....... O56
2630714 ..... 422152-000120 K30F-DCHP ....... O56
2630717 ..... 422152-000160 K30F-DCHP ....... O56
2630718 ..... 422152-000200 K30F-DCHP ....... O56
2630719 ..... 422152-000250 K30F-DCHP ....... O56
2635004 ..... 022852-003005 K10F ................ O137
2635006 ..... 022852-004005 K10F ................ O137
2635010 ..... 022852-004010 K10F ................ O137
2635063 ..... 022852-005005 K10F ................ O137
2635065 ..... 022852-005010 K10F ................ O137
2635068 ..... 022852-006005 K10F ................ O137
2635072 ..... 022852-006010 K10F ................ O137
2635094 ..... 022852-006020 K10F ................ O137
2635097 ..... 022852-008005 K10F ................ O137
2635100 ..... 022852-008010 K10F ................ O137
2635101 ..... 022852-008020 K10F ................ O137
2635103 ..... 022852-010005 K10F ................ O137
2635104 ..... 022852-010010 K10F ................ O137
2635107 ..... 022852-010020 K10F ................ O137
2635109 ..... 022852-012005 K10F ................ O137
2635110 ..... 022852-012010 K10F ................ O137
2635124 ..... 022852-012020 K10F ................ O137
2635127 ..... 022852-016005 K10F ................ O137
2635128 ..... 022852-016010 K10F ................ O137
2635129 ..... 022852-016020 K10F ................ O137
2635130 ..... 022852-016030 K10F ................ O137
2635131 ..... 524152-003005 K10F-DCL ........ O137
2635153 ..... 524152-004005 K10F-DCL ........ O137
2635155 ..... 524152-004010 K10F-DCL ........ O137
2635156 ..... 524152-005005 K10F-DCL ........ O137
Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 12 11/2/15 10:33 AM
LViWID M 16 I d Z002 Z145 M i REBRANDO b 28 20153 09PM
Z13
widia.com
Index by Order Number
Order No. Catalogue No. Page(s)
2635157 ..... 524152-005010 K10F-DCL ........ O137
2635158 ..... 524152-006005 K10F-DCL ........ O137
2635161 ..... 524152-006010 K10F-DCL ........ O137
2635162 ..... 524152-006020 K10F-DCL ........ O137
2635173 ..... 524152-008005 K10F-DCL ........ O137
2635175 ..... 524152-008010 K10F-DCL ........ O137
2635176 ..... 524152-008020 K10F-DCL ........ O137
2635180 ..... 524152-010005 K10F-DCL ........ O137
2635181 ..... 524152-010010 K10F-DCL ........ O137
2635193 ..... 524152-010020 K10F-DCL ........ O137
2635344 ..... 524152-012005 K10F-DCL ........ O137
2635348 ..... 524152-012020 K10F-DCL ........ O137
2635349 ..... 524152-016005 K10F-DCL ........ O137
2635350 ..... 524152-016010 K10F-DCL ........ O137
2635351 ..... 524152-016020 K10F-DCL ........ O137
2635383 ..... 524152-016030 K10F-DCL ........ O137
2638760 ..... M270TF10R1 TN2525 ............... M122
2638761 ..... M270TF12R2 TN2525 ............... M122
2638762 ..... M270TF16R3 TN2525 ............... M122
2639023 ..... M270TF20R4 TN2525 ............... M122
2639257 ..... M270BD020A20L170C W.......... M105
2642318 ..... 5IL55ISO TN6025 ...........................F53
2642319 ..... 5IL60ISO TN6025 ...........................F53
2651100 ..... 524149-000030 K10F-DCL ........ O132
2651314 ..... 524149-000040 K10F-DCL ........ O132
2651317 ..... 524149-000050 K10F-DCL ........ O132
2651318 ..... 524149-000060 K10F-DCL ........ O132
2651319 ..... 524149-000080 K10F-DCL ........ O132
2651320 ..... 524149-000100 K10F-DCL ........ O132
2651321 ..... 524149-000120 K10F-DCL ........ O132
2656458 ..... 422837-012005 K10UF-DCHP ... O192
2656459 ..... 422837-016005 K10UF-DCHP ... O192
2656460 ..... 422837-020005 K10UF-DCHP ... O192
2656461 ..... 422837-025005 K10UF-DCHP ... O192
2656784 ..... M40343 .......................................... R9
2657057 ..... 422831-012005 K10UF-DCHP ... O192
2657058 ..... 422831-016005 K10UF-DCHP ... O192
2729457 ..... M41480 ........................................ R14
2729472 ..... M41476 ........................................ R14
2729483 ..... M41473 ........................................ R14
2729591 ..... M41439 ........................................ R12
2729701 ..... M41397 ........................................ R11
2729793 ..... M41368 ........................................ R10
2729840 ..... M41356 .......................................... R9
2729850 ..... M41352 .......................................... R9
2729855 ..... M41348 .......................................... R9
2729860 ..... M41347 .......................................... R9
2729863 ..... M41344 .......................................... R9
2729868 ..... M41343 .......................................... R9
2729973 ..... M41311 .......................................... R8
2729982 ..... M40584 ........................................ R14
2730002 ..... M40560 .......................................... R8
2730007 ..... M40559 .......................................... R8
2730139 ..... M40503 ........................................ R15
2730149 ..... M40496 ........................................ R15
2730217 ..... M40479 ........................................ R14
2730227 ..... M40475 ........................................ R14
2730232 ..... M40474 ........................................ R14
2730335 ..... M40430 ........................................ R12
2730416 ..... M40400 ........................................ R11
2730421 ..... M40399 ........................................ R11
2730426 ..... M40398 ........................................ R11
2730515 ..... M40373 ........................................ R10
2730567 ..... M40347 .......................................... R9
2730572 ..... M40344 .......................................... R9
2730690 ..... M40309 .......................................... R8
2735310 ..... M42039 ........................................ R17
2735316 ..... M42038 ........................................ R17
2735320 ..... M42037 ........................................ R17
2735326 ..... M42036 ........................................ R17
2735331 ..... M42035 ........................................ R17
2735336 ..... M42034 ........................................ R17
2735341 ..... M42033 ........................................ R17
2735346 ..... M42032 ........................................ R17
2735352 ..... M42031 ........................................ R17
2735357 ..... M42030 ........................................ R17
2735361 ..... M42029 ........................................ R17
2735366 ..... M42028 ........................................ R17
2735371 ..... M42027 ........................................ R17
2735376 ..... M42026 ........................................ R17
2735381 ..... M42025 ........................................ R17
2735386 ..... M42024 ........................................ R17
2735391 ..... M42023 ........................................ R17
2735396 ..... M42022 ........................................ R17
2735401 ..... M42021 ........................................ R17
2735406 ..... M42020 ........................................ R17
2735411 ..... M42019 ........................................ R17
2735417 ..... M42018 ........................................ R17
2735423 ..... M42016 ........................................ R17
2735427 ..... M42015 ........................................ R17
2735432 ..... M42014 ........................................ R17
2735439 ..... M42013 ........................................ R17
2735443 ..... M42012 ........................................ R17
2735449 ..... M42010 ........................................ R17
2735454 ..... M42009 ........................................ R17
2735459 ..... M42008 ........................................ R17
2735464 ..... M42007 ........................................ R17
2735469 ..... M42006 ........................................ R17
2735503 ..... M41306 .......................................... R8
2735681 ..... M41241 .......................................... R6
2735696 ..... M41232 .......................................... R6
2736206 ..... M40598 ........................................ R18
2736212 ..... M40597 ........................................ R18
2736217 ..... M40596 ........................................ R18
2736231 ..... M40592 ........................................ R18
2736241 ..... M40589 ........................................ R18
2736256 ..... M40553 .......................................... R6
2736260 ..... M40552 .......................................... R6
2736314 ..... M40316 .......................................... R8
2736319 ..... M40304 .......................................... R8
2736416 ..... M40282 .......................................... R7
2736421 ..... M40274 .......................................... R7
2736488 ..... M40239 .......................................... R6
2736500 ..... M40233 .......................................... R6
2736505 ..... M40230 .......................................... R6
2736509 ..... M40229 .......................................... R6
2736516 ..... M40228 .......................................... R6
2736521 ..... M40224 .......................................... R6
2759445 ..... 7SZTL ........................................... U45
2759446 ..... 7SZSS ........................................... U40
2759447 ..... 7SZSM .......................................... U40
2759448 ..... 7SZSL ........................................... U41
2759459 ..... 7S7TM .......................................... U44
2759460 ..... 7S7TL ........................................... U45
2759462 ..... 7S5TS ........................................... U44
2759463 ..... 7S5TM .......................................... U44
2759464 ..... 7S5TL ........................................... U45
2759465 ..... 7S5SS ........................................... U40
2759466 ..... 7S5SM .......................................... U40
2759469 ..... 7S4TS ........................................... U44
2759470 ..... 7S4TM .......................................... U44
2759471 ..... 7S4TL ........................................... U45
2759472 ..... 7S4SS ........................................... U40
2759473 ..... 7S4SM .......................................... U40
2759474 ..... 7S4SL ........................................... U41
2759475 ..... 7S4SE ........................................... U41
2759476 ..... 7S3TS ........................................... U44
2759477 ..... 7S3TM .......................................... U44
2759478 ..... 7S3TL ........................................... U45
2759479 ..... 7S3SS ........................................... U40
2759480 ..... 7S3SM .......................................... U40
2759481 ..... 7S3SL ........................................... U41
2759482 ..... 7S2TS ........................................... U44
2759483 ..... 7S2TM .......................................... U44
2759484 ..... 7S2TL ........................................... U45
2759485 ..... 7S2TE ........................................... U45
2759486 ..... 7S2SS ........................................... U40
2759489 ..... 7S2SE ........................................... U41
2759491 ..... 7S2.5SS........................................ U40
2759492 ..... 7S2.5SM ....................................... U40
2759494 ..... 7S1TS ........................................... U44
2759495 ..... 7S1TM .......................................... U44
2759496 ..... 7S1TL ........................................... U45
2759498 ..... 7S1SS ........................................... U40
2759499 ..... 7S1SM .......................................... U40
2759500 ..... 7S1SL ........................................... U41
2759501 ..... 7S1SE ........................................... U41
2759502 ..... 7S1.5TM ....................................... U44
2759503 ..... 7S1.5SS........................................ U40
2759504 ..... 7S1.5SM ....................................... U40
2759506 ..... 7S0TM .......................................... U44
2759507 ..... 7S0TL ........................................... U45
2759508 ..... 7S0TE ........................................... U45
2759509 ..... 7S0SS ........................................... U40
2759510 ..... 7S0SM .......................................... U40
2759511 ..... 7S0SL ........................................... U41
2759512 ..... 7S0SE ........................................... U41
2759513 ..... 7S0.5SS........................................ U40
2759514 ..... 7S0.5SM ....................................... U40
2759515 ..... 7S0.5SL ........................................ U41
2759516 ..... 7S0.5SE ........................................ U41
2759581 ..... 7FZ-0500T ................................... U28
2759588 ..... 7FZ-0492A ................................... U28
2759592 ..... 7FZ-0484A ................................... U28
2759599 ..... 7FZ-0472A ................................... U28
2759621 ..... 7FZ-0438A ................................... U28
2759684 ..... 7F7-4000A ................................... U37
2759688 ..... 7F7-3938T ................................... U37
2759698 ..... 7F7-3688T ................................... U37
2759703 ..... 7F7-3563T ................................... U37
2759709 ..... 7F6-3500T ................................... U37
2759715 ..... 7F6-3438T ................................... U37
2759718 ..... 7F6-3375T ................................... U37
2759726 ..... 7F6-3250T ................................... U37
2759731 ..... 7F6-3188T ................................... U37
2759736 ..... 7F6-3150A ................................... U37
2759739 ..... 7F6-3125A ................................... U37
2759742 ..... 7F6-3071A ................................... U37
2759743 ..... 7F6-3063T ................................... U37
2759745 ..... 7F6-3063A ................................... U37
2759748 ..... 7F5-3000T ................................... U36
2759751 ..... 7F5-3000A ................................... U36
2759753 ..... 7F5-2969T ................................... U36
2759755 ..... 7F5-2969A ................................... U36
2759756 ..... 7F5-2938T ................................... U36
2759764 ..... 7F5-2875T ................................... U36
2759766 ..... 7F5-2875A ................................... U36
2759773 ..... 7F5-2813A ................................... U36
2759778 ..... 7F5-2750T ................................... U36
2759780 ..... 7F5-2750A ................................... U36
2759781 ..... 7F5-2719T ................................... U36
2759788 ..... 7F5-2677A ................................... U36
2759789 ..... 7F5-2656T ................................... U36
2759791 ..... 7F5-2625T ................................... U36
2759801 ..... 7F5-2563T ................................... U36
2759802 ..... 7F5-2563A ................................... U36
2759808 ..... 7F5-2500T ................................... U36
2759811 ..... 7F4-2563T ................................... U35
2759813 ..... 7F4-2563A ................................... U35
2759816 ..... 7F4-2531T ................................... U35
2759820 ..... 7F4-2500T ................................... U35
2759822 ..... 7F4-2500A ................................... U35
2759823 ..... 7F4-2480T ................................... U35
2759828 ..... 7F4-2469A ................................... U35
2759830 ..... 7F4-2441A ................................... U35
2759831 ..... 7F4-2438T ................................... U35
2759833 ..... 7F4-2438A ................................... U35
2759840 ..... 7F4-2375T ................................... U35
2759843 ..... 7F4-2375A ................................... U35
2759845 ..... 7F4-2362T ................................... U34
2759848 ..... 7F4-2344T ................................... U34
2759851 ..... 7F4-2323A ................................... U34
2759852 ..... 7F4-2313T ................................... U34
2759854 ..... 7F4-2313A ................................... U34
2759857 ..... 7F4-2284A ................................... U34
2759858 ..... 7F4-2281T ................................... U34
2759862 ..... 7F4-2250T ................................... U34
2759865 ..... 7F4-2250A ................................... U34
2759868 ..... 7F4-2244A ................................... U34
2759870 ..... 7F4-2219T ................................... U34
2759872 ..... 7F4-2219A ................................... U34
2759874 ..... 7F4-2205A ................................... U34
2759876 ..... 7F4-2188T ................................... U34
2759880 ..... 7F4-2166A ................................... U32
2759882 ..... 7F4-2156T ................................... U34
2759887 ..... 7F4-2126A ................................... U34
2759888 ..... 7F4-2125T ................................... U34
2759891 ..... 7F4-2125A ................................... U34
2759892 ..... 7F4-2094T ................................... U34
2759896 ..... 7F4-2063T ................................... U34
2759899 ..... 7F4-2063A ................................... U34
2759900 ..... 7F4-2047T ................................... U34
2759901 ..... 7F4-2047A ................................... U34
2759902 ..... 7F4-2031T ................................... U34
2759904 ..... 7F4-2031A ................................... U34
2759911 ..... 7F4-2008T ................................... U34
2759913 ..... 7F4-2000T ................................... U34
2759916 ..... 7F4-2000A ................................... U34
2759919 ..... 7F4-1969T ................................... U34
2759921 ..... 7F4-1969A ................................... U34
2759925 ..... 7F4-1938T ................................... U34
2759927 ..... 7F4-1938A ................................... U34
2759930 ..... 7F4-1929A ................................... U34
2759932 ..... 7F4-1906T ................................... U34
2759934 ..... 7F4-1906A ................................... U34
2759935 ..... 7F4-1890T ................................... U34
2759936 ..... 7F4-1890A ................................... U34
2759937 ..... 7F4-1880T ................................... U34
2759942 ..... 7F3-1875T ................................... U33
2759945 ..... 7F3-1875A ................................... U33
2759949 ..... 7F3-1850T ................................... U33
2759951 ..... 7F3-1844T ................................... U33
2759956 ..... 7F3-1813T ................................... U33
2759958 ..... 7F3-1813A ................................... U33
Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 13 11/2/15 10:33 AM
LViWID M 16 I d Z002 Z145 M i REBRAND O b 28 2015 3 09 PM
Z14 widia.com
Index by Order Number
Order No. Catalogue No. Page(s)
2759960 ..... 7F3-1811A ................................... U33
2759963 ..... 7F3-1781T ................................... U33
2759967 ..... 7F3-1772T ................................... U33
2759969 ..... 7F3-1772A ................................... U33
2759970 ..... 7F3-1766T ................................... U33
2759974 ..... 7F3-1750T ................................... U33
2759977 ..... 7F3-1750A ................................... U33
2759984 ..... 7F3-1732A ................................... U33
2759985 ..... 7F3-1719T ................................... U33
2759987 ..... 7F3-1719A ................................... U33
2759989 ..... 7F3-1693T ................................... U33
2759991 ..... 7F3-1688T ................................... U33
2759993 ..... 7F3-1688A ................................... U33
2759996 ..... 7F3-1656T ................................... U33
2760001 ..... 7F3-1654A ................................... U33
2760004 ..... 7F3-1625T ................................... U33
2760008 ..... 7F3-1625A ................................... U33
2760011 ..... 7F3-1614A ................................... U33
2760015 ..... 7F3-1594T ................................... U33
2760021 ..... 7F3-1575T ................................... U33
2760023 ..... 7F3-1575A ................................... U33
2760024 ..... 7F3-1563T ................................... U33
2760027 ..... 7F3-1563A ................................... U33
2760034 ..... 7F3-1535A ................................... U33
2760035 ..... 7F3-1531T ................................... U33
2760038 ..... 7F3-1516T ................................... U33
2760045 ..... 7F3-1500T ................................... U33
2760048 ..... 7F3-1500A ................................... U33
2760051 ..... 7F3-1496A ................................... U33
2760053 ..... 7F3-1484T ................................... U33
2760056 ..... 7F3-1469T ................................... U33
2760058 ..... 7F3-1469A ................................... U33
2760059 ..... 7F3-1457T ................................... U33
2760060 ..... 7F3-1457A ................................... U33
2760063 ..... 7F3-1438T ................................... U33
2760066 ..... 7F3-1438A ................................... U33
2760069 ..... 7F3-1417T ................................... U33
2760072 ..... 7F3-1417A ................................... U33
2760076 ..... 7F3-1406T ................................... U33
2760078 ..... 7F3-1406A ................................... U33
2760079 ..... 7F3-1391T ................................... U33
2760089 ..... 7F2-1378A ................................... U32
2760090 ..... 7F2-1375T ................................... U32
2760094 ..... 7F2-1359T ................................... U32
2760098 ..... 7F2-1344T ................................... U32
2760101 ..... 7F2-1344A ................................... U32
2760105 ..... 7F2-1339A ................................... U32
2760106 ..... 7F2-1328T ................................... U32
2760109 ..... 7F2-1313T ................................... U31
2760112 ..... 7F2-1313A ................................... U31
2760118 ..... 7F2-1299A ................................... U31
2760121 ..... 7F2-1281T ................................... U31
2760128 ..... 7F2-1260T ................................... U31
2760131 ..... 7F2-1260A ................................... U31
2760134 ..... 7F2-1250T ................................... U31
2760137 ..... 7F2-1250A ................................... U31
2760141 ..... 7F2-1234T ................................... U31
2760142 ..... 7F2-1234N ................................... U31
2760147 ..... 7F2-1221A ................................... U31
2760148 ..... 7F2-1219T ................................... U31
2760150 ..... 7F2-1219A ................................... U31
2760152 ..... 7F2-1203T ................................... U31
2760159 ..... 7F2-1188T ................................... U31
2760162 ..... 7F2-1188A ................................... U31
2760164 ..... 7F2-1181T ................................... U31
2760167 ..... 7F2-1181A ................................... U31
2760169 ..... 7F2-1172T ................................... U31
2760174 ..... 7F2-1156T ................................... U31
2760181 ..... 7F2-1142A ................................... U31
2760184 ..... 7F2-1125T ................................... U31
2760188 ..... 7F2-1125A ................................... U31
2760189 ..... 7F2-1109T ................................... U31
2760194 ..... 7F2-1102T ................................... U31
2760195 ..... 7F2-1102A ................................... U31
2760196 ..... 7F2-1094T ................................... U31
2760199 ..... 7F2-1094A ................................... U31
2760203 ..... 7F2-1078T ................................... U31
2760207 ..... 7F2-1063T ................................... U31
2760214 ..... 7F2-1047T ................................... U31
2760216 ..... 7F2-1047A ................................... U31
2760219 ..... 7F2-1031T ................................... U31
2760222 ..... 7F2-1031A ................................... U31
2760223 ..... 7F2-1024T ................................... U31
2760226 ..... 7F2-1016T ................................... U31
2760234 ..... 7F2-1003A ................................... U31
2760235 ..... 7F2-1000T ................................... U31
2760239 ..... 7F2-1000A ................................... U31
2760240 ..... 7F2-0984T ................................... U31
2760243 ..... 7F2-0984A ................................... U31
2760247 ..... 7F2-0969T ................................... U31
2760248 ..... 7F2-0969N ................................... U31
2760253 ..... 7F1-0953T ................................... U30
2760256 ..... 7F1-0953A ................................... U30
2760257 ..... 7F1-0945T ................................... U30
2760262 ..... 7F1-0938T ................................... U30
2760265 ..... 7F1-0938A ................................... U30
2760268 ..... 7F1-0922T ................................... U30
2760273 ..... 7F1-0906T ................................... U30
2760276 ..... 7F1-0906A ................................... U30
2760278 ..... 7F1-0891T ................................... U30
2760280 ..... 7F1-0891A ................................... U30
2760282 ..... 7F1-0875T ................................... U30
2760287 ..... 7F1-0866T ................................... U30
2760290 ..... 7F1-0859T ................................... U30
2760292 ..... 7F1-0859A ................................... U30
2760296 ..... 7F1-0844T ................................... U30
2760300 ..... 7F1-0828T ................................... U30
2760302 ..... 7F1-0828A ................................... U30
2760303 ..... 7F1-0827T ................................... U30
2760305 ..... 7F1-0827A ................................... U30
2760310 ..... 7F1-0813T ................................... U30
2760315 ..... 7F1-0813A ................................... U30
2760316 ..... 7F1-0807T ................................... U30
2760319 ..... 7F1-0807A ................................... U30
2760323 ..... 7F1-0797T ................................... U30
2760324 ..... 7F1-0797N ................................... U30
2760328 ..... 7F1-0787T ................................... U30
2760330 ..... 7F1-0787A ................................... U30
2760331 ..... 7F1-0781T ................................... U30
2760335 ..... 7F1-0781A ................................... U30
2760338 ..... 7F1-0768T ................................... U30
2760341 ..... 7F1-0766T ................................... U30
2760344 ..... 7F1-0766A ................................... U30
2760359 ..... 7F1-0748T ................................... U30
2760361 ..... 7F1-0748A ................................... U30
2760362 ..... 7F1-0734T ................................... U30
2760365 ..... 7F1-0734A ................................... U30
2760371 ..... 7F1-0719T ................................... U30
2760377 ..... 7F1-0709T ................................... U30
2760380 ..... 7F1-0709A ................................... U30
2760381 ..... 7F1-0703T ................................... U30
2760383 ..... 7F1-0703A ................................... U30
2760386 ..... 7F0-0689T ................................... U29
2760390 ..... 7F0-0688T ................................... U29
2760393 ..... 7F0-0688A ................................... U29
2760397 ..... 7F0-0672T ................................... U29
2760399 ..... 7F0-0672A ................................... U29
2760404 ..... 7F0-0669A ................................... U29
2760413 ..... 7F0-0656A ................................... U29
2760415 ..... 7F0-0650T ................................... U29
2760418 ..... 7F0-0641T ................................... U29
2760420 ..... 7F0-0641A ................................... U29
2760424 ..... 7F0-0630T ................................... U29
2760430 ..... 7F0-0625T ................................... U29
2760440 ..... 7F0-0610A ................................... U29
2760441 ..... 7F0-0609T ................................... U29
2760444 ..... 7F0-0609A ................................... U29
2760449 ..... 7F0-0594T ................................... U29
2760452 ..... 7F0-0594A ................................... U29
2760453 ..... 7F0-0591T ................................... U29
2760454 ..... 7F0-0591A ................................... U29
2760458 ..... 7F0-0578T ................................... U29
2760460 ..... 7F0-0578A ................................... U29
2760463 ..... 7F0-0571A ................................... U29
2760466 ..... 7F0-0563T ................................... U29
2760472 ..... 7F0-0563A ................................... U29
2760473 ..... 7F0-0551T ................................... U29
2760477 ..... 7F0-0551A ................................... U29
2760478 ..... 7F0-0547T ................................... U29
2760481 ..... 7F0-0547A ................................... U29
2760485 ..... 7F0-0531T ................................... U29
2760489 ..... 7F0-0531A ................................... U29
2760492 ..... 7F0-0516A ................................... U29
2760494 ..... 7F0-0512T ................................... U29
2760712 ..... 56-2125 ...................U40–41, U44–45
2760714 ..... 56-2028 ...................U40–41, U44–45
2760715 ..... 56-2026 ...................U40–41, U44–45
2760718 ..... 56-2017 ...................U40–41, U44–45
2760719 ..... 56-2015 ...................U40–41, U44–45
2760725 ..... 56-1025 ...................U40–41, U44–45
2760731 ..... 56-1014 ................................. U40–45
2820783 ..... FNR150472R CG5 ........................ D56
2820829 ..... FNT1512ACME2R CG5 ................. D57
2820865 ..... FNT1528UN2R CG5 ...................... D57
2820981 ..... LTM16 WG ....................D59, D71, D84
2821023 ..... WPMT06T308LF CG55 ................. D54
2821036 ..... WPMT06T304LF CG55 ................. D54
2821067 ..... TPHH160308 CG5 ........................ D52
2821070 ..... TPHH160304 CG5 ........................ D52
2821115 ..... TPHH160308L CG5 ....................... D51
2821121 ..... TPHH160308R CG5 ...................... D51
2821150 ..... TPHH160304L CG6 ....................... D51
2821162 ..... TPHH160304L CG5 ....................... D51
2821168 ..... TPHH160304R CG5 ...................... D51
2821208 ..... TPHH160302L CG5 ....................... D51
2821213 ..... TPHH160302R CG5 ...................... D51
2821319 ..... TPHH17T309LF CG5 ..................... D52
2821331 ..... TPHB160308 TN7 ......................... D50
2821349 ..... TPHB160308 CM1 ........................ D50
2821371 ..... TPHB160308 C2 ........................... D50
2821377 ..... TPHB160308 CG6......................... D50
2821381 ..... TPHB160308 CG5......................... D50
2821392 ..... TPHB160304 CG5......................... D50
2821397 ..... TPHB160302 CG5......................... D50
2821402 ..... TPHB1603X0 CG5 ......................... D50
2821484 ..... CPMT09T308LF CG5 .................... D45
2821499 ..... CPMT09T304LF CG5 .................... D45
2821519 ..... CPMT09T302LF CG5 .................... D45
2821536 ..... TPGT16T304HP CG5..................... D53
2821566 ..... TPMT160308LF CG5 .................... D53
2821571 ..... TPMT160304LF CG6 .................... D53
2821577 ..... TPMT160304LF CG5 .................... D53
2821670 ..... TPHH160308 CG6 ........................ D52
2821688 ..... TPHH160308 ALO ......................... D52
2821705 ..... TPHH160304 CG6 ........................ D52
2821718 ..... TPHH160304LF C25 ..................... D52
2821749 ..... TPHB160304 TN7 ......................... D50
2821772 ..... TPHB160304 CM1 ........................ D50
2821778 ..... TPHB160304 CG6......................... D50
2821799 ..... TPHB160304 C2 ........................... D50
2821816 ..... TPHB160302 CM1 ........................ D50
2821822 ..... TPCB160302 CG6......................... D50
2821834 ..... TPHB160302 C2 ........................... D50
2821844 ..... TPHB1603X0 CM1 ........................ D50
2822085 ..... SDBM162545R WG....................... D22
2823182 ..... SKEY WG .......................D59, D71, D84
2823196 ..... STBIT WG ......................D59, D71, D84
2823203 ..... STM31 WG....................D59, D71, D84
2823227 ..... SC30 WG ....... D21–22, D59, D71, D84
2823236 ..... SBIT WG ........................D59, D71, D84
2823592 ..... TPGT110204HP CG5 .................... D53
2823595 ..... TPGT110204HP CM1 .................... D53
2823605 ..... TPGT110202HP CG5 .................... D53
2823619 ..... TPMT110204LF CG6 .................... D53
2823625 ..... TPMT110204LF CG5 .................... D53
2823646 ..... TPMT110202LF CG5 .................... D53
2823739 ..... TPHH110204L CG6 ....................... D51
2823753 ..... TPHH110204L CG5 ....................... D51
2823767 ..... TPHH110202L TN7 ....................... D51
2823805 ..... TPHH110202L CG5 ....................... D51
2823812 ..... TPHH110202R CG5 ...................... D51
2823851 ..... TPCH110204 CG6 ........................ D52
2823858 ..... TPHH110204 CG5 ........................ D52
2823908 ..... TPHH110202 CG6 ........................ D52
2823914 ..... TPHH110202 CG5 ........................ D52
2823942 ..... TPHB110204M CBN6 ................... D50
2823949 ..... TPHB110202M CBN6 ................... D50
2823954 ..... TPHB1102X0M CBN6 ................... D50
2824015 ..... TPHB110204M CPD1 ................... D50
2824022 ..... TPHB110202M CPD1 ................... D50
2824037 ..... TPHB110208 TN7 ......................... D50
2824044 ..... TPHB110208 CM1 ........................ D50
2824077 ..... TPHB110208 CG5......................... D50
2824090 ..... TPHB110204 TN7 ......................... D50
2824104 ..... TPHB110204 CM1 ........................ D50
2824122 ..... TPHB110204 C3 ........................... D50
2824129 ..... TPHB110204 CG6......................... D50
2824136 ..... TPHB110204 CG5......................... D50
2824148 ..... TPHB110202 TN7 ......................... D50
2824168 ..... TPHB110202 CM1 ........................ D50
2824191 ..... TPHB110202 C3 ........................... D50
2824195 ..... TPHB110202 CG6......................... D50
2824200 ..... TPHB110202 CG5......................... D50
2824220 ..... TPHB1102X0 CM1 ........................ D50
2824236 ..... TPHB1102X0 C3 ........................... D50
2824251 ..... TPHB1102X0 CG5 ......................... D50
2824266 ..... TBHB110201 CG5 ........................ D47
2824316 ..... WPHT040204 CG5........................ D54
2824331 ..... WPGT040202UF CG5 ................... D54
2824344 ..... WPHT040201 CG5........................ D54
2824362 ..... WPMT040204LF CG55 ................. D54
2824441 ..... CPHH06T104 CG5 ........................ D45
2824454 ..... CPHH06T102 CG6 ........................ D45
2824461 ..... CPHH06T102 CG5 ........................ D45
Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 14 11/2/15 10:33 AM
LViWID M 16 I d Z002 Z145 M i REBRANDO b 28 20153 09PM
Z15
widia.com
Index by Order Number
Order No. Catalogue No. Page(s)
2824468 ..... CPHH06T102 CM1 ........................ D45
2824516 ..... CPT20052R CG5 ........................... D56
2824523 ..... CPT20052R CM1 .......................... D56
2824531 ..... CPG2062R CG5 ............................ D55
2824546 ..... CPG2032R CG5 ............................ D55
2824562 ..... CPHB06T104 CG5 ........................ D44
2824583 ..... CPHB06T102 CG5 ........................ D44
2824747 ..... QCBM122545R WG ...................... D20
2824776 ..... QCBM102545R WG ...................... D20
2824819 ..... QSOM9516385R WG .................... D20
2824945 ..... QSBM9920385L WG ..................... D19
2824950 ..... QSBM9920385R WG .................... D19
2824993 ..... QSBM9916485R WG .................... D19
2825013 ..... QSBM9912480R WG .................... D19
2825019 ..... QSBM9912485L WG ..................... D19
2825024 ..... QSBM9912485R WG .................... D19
2825052 ..... QSBM9912295R WG .................... D19
2825941 ..... QTM20 WG .......................... D24, D59,
D71, D84
2825948 ..... QTM26 WG ...................D59, D71, D84
2825963 ..... QTBIT WG......................D59, D71, D84
2825964 ..... Q8BIT WG .....................D59, D71, D84
2825973 ..... Q8KEY WG ....................D59, D71, D84
2825982 ..... QKEY WG ......................D59, D71, D84
2826005 ..... QC15 WG ......................D59, D71, D84
2826038 ..... QC21 WG .......D18–20, D59, D71, D84
2826045 ..... QBIT WG .......................D59, D71, D84
2827471 ..... WPHTS30104 CG5........................ D54
2827477 ..... WPHTS30104 CM1 ....................... D54
2827483 ..... WPHTS30102 CG5........................ D54
2827490 ..... WPHTS30102 CM1 ....................... D54
2827496 ..... WPHTS30101 CG5........................ D54
2827521 ..... WPMTS3T104LF CG55 ................. D54
2827525 ..... GCHT060204 CG5 ........................ D46
2827531 ..... GCHT060204 CM1........................ D46
2827537 ..... GCHT060202 CG5 ........................ D46
2827548 ..... GPHT050104 CG5 ........................ D47
2827554 ..... GPHT050104 CM1 ........................ D47
2827560 ..... GPHT050102 CG5 ........................ D47
2827566 ..... GPHT050102 CM1 ........................ D47
2827577 ..... GCHW060204 CG5 ....................... D46
2827584 ..... GCHW060204 CM1 ...................... D46
2827596 ..... GCHW060202 CG5 ....................... D46
2827601 ..... GCHW060202 CM1 ...................... D46
2827608 ..... GPHW050104 CG6 ....................... D46
2827615 ..... GPHW050104 CG5 ....................... D46
2827621 ..... GPHW050104 CM1 ...................... D46
2827625 ..... GPHW050102 CG6 ....................... D46
2827631 ..... GPHW050102 CG5 ....................... D46
2827637 ..... GPHW050102 CM1 ...................... D46
2827644 ..... GCPM162545L WG ....................... D27
2827656 ..... GCPM10254225R WG .................. D27
2827705 ..... GCBMW61523L WG ...................... D23
2827711 ..... GCBMW61523R WG ..................... D23
2828116 ..... GSBMW61003L WG ...................... D23
2828122 ..... GSBMW61003R WG ..................... D23
2828318 ..... GTKEY WG.....................D59, D71, D84
2828337 ..... GT21 WG .......................D26–27, D59,
D71, D84
2828386 ..... TDHH07S104 CG5 ........................ D49
2828398 ..... TDHH07S102 CG5 ........................ D49
2828460 ..... TDHH07S104L TN7 ....................... D49
2828472 ..... TDHH07S104L CM1 ...................... D49
2828494 ..... TDHH07S104L CG5 ...................... D49
2828499 ..... TDHH07S104R CG5 ...................... D49
2828508 ..... TDHH07S102L TN7 ....................... D49
2828516 ..... TDHH07S102L CM1 ...................... D49
2828529 ..... TDHH07S102L CG6 ...................... D49
2828541 ..... TDHH07S102L CG5 ...................... D49
2828547 ..... TDHH07S102R CG5 ...................... D49
2828556 ..... TBHB07S1X0 CG5......................... D47
2828579 ..... TDHB07S102M CBN6 ................... D48
2828622 ..... TDHB07S1X0M CPD1 ................... D48
2828634 ..... TDHB07S104M CBN6 ................... D48
2828682 ..... TDHB07S108 CG5 ........................ D48
2828688 ..... TDHB07S104 TN7 ......................... D48
2828693 ..... TDHB07S104 CM1 ........................ D48
2828697 ..... TDHB07S104 C25......................... D48
2828702 ..... TDHB07S104 CG6 ........................ D48
2828708 ..... TDHB07S104 CG5 ........................ D48
2828720 ..... TDHB07S102 TN7 ......................... D48
2828727 ..... TDHB07S102 CM1 ........................ D48
2828732 ..... TDHB07S102 C25......................... D48
2828749 ..... TDHB07S102 CG6 ........................ D48
2828755 ..... TDHB07S102 CG5 ........................ D48
2828763 ..... TDHB07S102 ALO ......................... D48
2828778 ..... TDHB07S1X0 CM1 ........................ D48
2828784 ..... TDHB07S1X0 C25 ......................... D48
2828796 ..... TDHB07S1X0 CG5 ........................ D48
2829268 ..... FCBM8212790R WG ..................... D17
2829279 ..... FCBM8212795R WG ..................... D17
2829295 ..... FCBM8212385L WG ..................... D17
2829301 ..... FCBM8212385R WG ..................... D17
2829319 ..... FCBM6612325L WG ..................... D17
2829323 ..... FCBM6612325R WG ..................... D17
2829344 ..... FCBM5312255L WG ..................... D17
2829350 ..... FCBM5312255R WG ..................... D17
2829356 ..... FCBM81520R WG ......................... D16
2829368 ..... FCBM81525R WG ......................... D16
2829385 ..... FCBM61525L WG ......................... D16
2829390 ..... FCBM61525R WG ......................... D16
2829429 ..... FSBM6616195R WG ..................... D15
2829442 ..... FSBM8212380L WG ..................... D15
2829448 ..... FSBM8212380R WG ..................... D15
2829459 ..... FSBM8212385R WG ..................... D15
2829472 ..... FSBM8212250R WG ..................... D15
2829508 ..... FSBM6612195R WG ..................... D15
2829533 ..... FSBM5212125R WG ..................... D15
2829545 ..... FSBM81005L WG ......................... D14
2829554 ..... FSBM61000R WG ......................... D14
2829566 ..... FSBM61005R WG ......................... D14
2830477 ..... FC11 WG .......................D14–17, D59,
D71, D84
2830492 ..... FKEY WG .......................D59, D71, D84
2830497 ..... FBIT WG ........................D59, D71, D84
2830529 ..... CDG50302R CG5 .......................... D55
2830535 ..... CDG50302R CM1 ......................... D55
2830541 ..... CDG50252R CG5 .......................... D55
2830567 ..... CDT50022R CG5 .......................... D56
2830619 ..... CDHHS4T004 CG5 ........................ D44
2830632 ..... CDHHS4T002 CG5 ........................ D44
2830638 ..... CDHHS4T002 CM1 ....................... D44
2830678 ..... CDHHS4T004L CG5 ................ D43–44
2830682 ..... CDHHS4T004R CG5 ................D43–44
2830700 ..... CDHHS4T002L CM1................D43–44
2830706 ..... CDHHS4T002R CM1 ............... D43–44
2830712 ..... CDHHS4T002L CG6 ................ D43–44
2830724 ..... CDHHS4T002L CG5 ................ D43–44
2830731 ..... CDHHS4T002R CG5 ................D43–44
2830741 ..... CDHBS4T002M CBN6 ................... D42
2830746 ..... CDHBS4T0X0M CBN6 ................... D42
2830769 ..... CDHBS4T004M CPD1 ................... D42
2830774 ..... CDHBS4T002M CPD1 ................... D42
2830788 ..... CDHBS4T004 CG5 ........................ D42
2830803 ..... CDHBS4T004 TN7 ......................... D42
2830813 ..... CDHBS4T004 CM1 ....................... D42
2830817 ..... CDHBS4T004 CG6 ........................ D42
2830830 ..... CDHBS4T004 C25 ........................ D42
2830843 ..... CDHBS4T002 TN7 ......................... D42
2830848 ..... CDHBS4T002 CM1 ....................... D42
2830853 ..... CDHBS4T002 CG6 ........................ D42
2830864 ..... CDHBS4T002 C25 ........................ D42
2830870 ..... CDHBS4T002 ALO......................... D42
2830881 ..... CDHBS4T0X0 CM1........................ D42
2830888 ..... CDHBS4T0X0 CG6 ........................ D42
2830897 ..... CDHBS4T0X0 C25 ........................ D42
2830980 ..... CCPM8152225L WG ..................... D26
2831004 ..... CCPM6152225L WG ..................... D26
2831010 ..... CCPM6152225R WG .................... D26
2831020 ..... CCPM61525R WG ......................... D26
2831025 ..... CCBM51525L WG ......................... D12
2831048 ..... CSMM6760R WG .......................... D28
2831110 ..... CCBM6516320R WG .................... D13
2831117 ..... CCBM6516325L WG ..................... D13
2831127 ..... CCBM5316510R WG .................... D13
2831132 ..... CCBM5316515L WG ..................... D13
2831139 ..... CCBM5316515R WG .................... D13
2831157 ..... CCBM5316255L WG ..................... D13
2831162 ..... CCBM5316255R WG .................... D13
2831175 ..... CCBM6612630R WG .................... D13
2831188 ..... CCBM6612320R WG .................... D13
2831194 ..... CCBM6612325L WG .....................D13
2831201 ..... CCBM6612325R WG .................... D13
2831211 ..... CCBM5312510R WG .................... D13
2831244 ..... CCBM5312255R WG .................... D13
2831255 ..... CCBM4812485R WG .................... D13
2831265 ..... CCBM4812225R WG .................... D13
2831277 ..... CCBM81520R WG......................... D12
2831283 ..... CCBM81525L WG ......................... D12
2831289 ..... CCBM81525R WG......................... D12
2831307 ..... CCBM61525L WG ......................... D12
2831311 ..... CCBM61525R WG......................... D12
2831324 ..... CCBM41527R WG......................... D12
2831378 ..... CSPM81232225L WG ................... D25
2831383 ..... CSPM812325L WG ....................... D25
2831394 ..... CSPM71225225L WG ................... D25
2831399 ..... CSPM71225225R WG ................... D25
2831405 ..... CSPM712255L WG ....................... D25
2831411 ..... CSPM712255R WG ....................... D25
2831441 ..... CSBM5655R WG ........................... D10
2831462 ..... CSBM6412320R WG..................... D11
2831468 ..... CSBM6412325R WG..................... D11
2831477 ..... CSBM6412190R WG..................... D11
2831483 ..... CSBM6412195L WG ..................... D11
2831490 ..... CSBM6412195R WG..................... D11
2831499 ..... CSBM5212250R WG..................... D11
2831512 ..... CSBM5212255R WG..................... D11
2831528 ..... CSBM5212125L WG ..................... D11
2831548 ..... CSBM4512125R WG..................... D11
2831588 ..... CSBM6410195L WG ..................... D11
2831595 ..... CSBM6410195R WG..................... D11
2831606 ..... CSBM5210250R WG..................... D11
2831615 ..... CSBM5210255R WG..................... D11
2831639 ..... CSBM5210125R WG..................... D11
2831656 ..... CSBM4510125L WG ..................... D11
2831661 ..... CSBM4510125R WG..................... D11
2831666 ..... CSBM8765R WG ........................... D10
2831676 ..... CSBM6650R WG ........................... D10
2831687 ..... CSBM6655R WG ........................... D10
2831695 ..... CSBM4657L WG ........................... D10
2831701 ..... CSBM4657R WG ........................... D10
2831791 ..... CCBM61005L WG ......................... D12
2831801 ..... CCBM51000R WG......................... D12
2831807 ..... CCBM51005L WG ......................... D12
2831813 ..... CCBM41007L WG ......................... D12
2831821 ..... CCBM61005R WG......................... D12
2831826 ..... CCBM51005R WG......................... D12
2831832 ..... CCBM41007R WG......................... D12
2832628 ..... CKEY WG.......................D59, D71, D84
2832635 ..... CT11 WG ............. D23, D59, D71, D84
2832641 ..... CT15 WG ....... D25–26, D59, D71, D84
2832647 ..... CC11 WG .............. D10–13, D28, D59,
D71, D84
2832661 ..... CBIT WG ........................D59, D71, D84
2832689 ..... BP250825R CG5........................... D70
2832702 ..... BP187600R CG5........................... D70
2832719 ..... BB3121250R CM1 ........................ D69
2832724 ..... BB3121250R CG5 ........................ D69
2832742 ..... BB2501000R CM1 ........................ D69
2832747 ..... BB2501000R CG5 ........................ D69
2832758 ..... BB1871250R CG5 ........................ D69
2832769 ..... BB187750R CG5 .......................... D69
2832809 ..... CSM22500 WG ............................. D29
2832813 ..... CSM22375 WG ............................. D29
2832820 ..... CSM22312 WG ............................. D29
2832827 ..... CSM22250 WG ............................. D29
2832832 ..... CSM22187 WG ............................. D29
2832838 ..... CSM22156 WG ............................. D29
2836024 ..... BW312 WG .......................... D59, D62,
D71, D84
2836085 ..... MB010062R CM1 ......................... D79
2836098 ..... MB010062R CG5 .......................... D79
2836168 ..... MT15660F2R CM1 ....................... D83
2836180 ..... MT09560F2R CM1 ....................... D83
2836184 ..... MP156500R CM1 ......................... D82
2836190 ..... MP125375R CM1 ......................... D82
2836210 ..... MG156050R CM1 ......................... D81
2836223 ..... MG095030R CM1 ......................... D81
2836229 ..... MB156875R CM1 ......................... D79
2836240 ..... MB125625R CM1 ......................... D79
2836251 ..... MB094500R CM1 ......................... D79
2836263 ..... MB062312R CM1 ......................... D79
2836328 ..... MT12560F2R CG5 ........................ D83
2836339 ..... MP156500R CG5 .......................... D82
2836345 ..... MP125375R CG5 .......................... D82
2836351 ..... MP094281R CG5 .......................... D82
2836357 ..... MP062187R CG5 .......................... D82
2836388 ..... MB156500R CG5 .......................... D79
2836405 ..... MB094500R CG5 .......................... D79
2836418 ..... MB062312R CG5 .......................... D79
2836423 ..... MB062187R CG5 .......................... D79
2836436 ..... ATD15660F2 CM1 ........................ D69
2836443 ..... ATD15660F2 CG5 ......................... D69
2836450 ..... ATD12560F2 CM1 ........................ D69
2836473 ..... APD156500R CM1........................ D68
2836489 ..... APD125375R CG5 ........................ D68
2836495 ..... APD09281R CM1 .......................... D68
2836511 ..... APD06187R CG5 .......................... D68
2836524 ..... AGD15605 CG5 ............................ D68
2836537 ..... AGD12504 CG5 ............................ D68
2836545 ..... AGD09503 CM1............................ D68
2836550 ..... AGD09503 CG5 ............................ D68
2836561 ..... ABD156875R CG5 ........................ D67
2836573 ..... ABD156500R CG5 ........................ D67
Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 15 11/2/15 10:33 AM
LViWID M 16 I d Z002 Z145 M i REBRAND O b 28 2015 3 09 PM
Z16 widia.com
Index by Order Number
Order No. Catalogue No. Page(s)
2836579 ..... ABD125625R CM1 ....................... D67
2836582 ..... ABD125625R CG5 ........................ D67
2836588 ..... ABD125375R CM1 ....................... D67
2836593 ..... ABD125375R CG5 ........................ D67
2836599 ..... ABD09500R CM1.......................... D67
2836604 ..... ABD09500R CG5 .......................... D67
2836608 ..... ABD09281R CM1.......................... D67
2836614 ..... ABD09281R CG5 .......................... D67
2836621 ..... ABD06312R CM1.......................... D67
2836627 ..... ABD06312R CG5 .......................... D67
2836632 ..... ABD06187R CM1.......................... D67
2836639 ..... ABD06187R CG5 .......................... D67
2836645 ..... ABC1500R WG .............................. D63
2836651 ..... ABC1250R WG .............................. D63
2836656 ..... ABC1000R WG .............................. D63
2836660 ..... ABC750R WG ................................ D63
2836667 ..... ABC500R WG ................................ D63
2836679 ..... ABD156875RM CBN6 ................... D67
2839192 ..... ATBM1638 WG ............................. D62
2840089 ..... MBIT WG .......................D59, D71, D84
2840094 ..... MKEY WG ......................D59, D71, D84
2840098 ..... MSM46 WG ......... D59, D71, D74, D84
2840174 ..... AKEY WG .......................D59, D71, D84
2840186 ..... AS832/AS-8-32 WG ............. D59, D62,
D71, D84
2840192 ..... AW250/AW-250 WG ............D59, D62,
D71, D84
2872844 ..... M41504 ........................................ R15
2875848 ..... 7S2SL ........................................... U41
2891175 ..... 7FZ-0500A ................................... U28
2891178 ..... 7F0-0630A ................................... U29
2891181 ..... 7F1-0945A ................................... U30
2892513 ..... BS832 WG ........... D59, D62, D71, D84
2894600 ..... M41518 ........................................ R16
2894601 ..... M41432 ........................................ R12
2894603 ..... M41310 .......................................... R8
2894604 ..... M41307 .......................................... R8
2894606 ..... M41261 .......................................... R7
2895961 ..... 7SZTS ........................................... U44
2895963 ..... 7S7SL ........................................... U41
2895971 ..... 7F4-2087A ................................... U34
2895976 ..... 7F2-1254T ................................... U31
2907270 ..... 7F0-0509A ................................... U29
2907272 ..... 7F2-1231A ................................... U31
2940716 ..... 7F1-0866A ................................... U30
2949031 ..... M41227 .......................................... R6
2952069 ..... SNMX120712T02020 CW5025
........................................................................ B190
2952070 ..... SNMX120716T02020 CW5025
........................................................................ B190
2952071 ..... SNMX150716T02020 CW5025
........................................................................ B190
2952072 ..... TNGN160408T02020 CW5025 ... B192
2952082 ..... CNGN120408T02020 CW5025
........................................................................ B177
2952113 ..... CNGN120412T02020 CW5025
........................................................................ B177
2952114 ..... CNGN120416T02020 CW5025
........................................................................ B177
2952115 ..... CNGN120712T02020 CW5025
........................................................................ B177
2952117 ..... CNGX120708T02020 CW5025 ... B179
2952118 ..... CNGX120712T01020FW CW5025
........................................................................ B179
2952119 ..... CNGX120712T02020 CW5025 ... B179
2952121 ..... CNGX160716T02020 CW5025 ... B179
2952124 ..... DNGX120712T02020 CW5025 ... B181
2952125 ..... DNGX120716T02020 CW5025 ... B181
2952126 ..... DNGX150708T02020 CW5025 ... B181
2952127 ..... DNGX150712T02020 CW5025 ... B181
2952128 ..... DNGX150716T02020 CW5025 ... B181
2952130 ..... ENGX130716T02020 CW5025 ... B182
2952131 ..... RNGN120400T02020 CW5025... B184
2952133 ..... RNGN150700T02020 CW5025... B184
2952135 ..... SNGN120408T02020 CW5025 ... B187
2952136 ..... SNGN120412T02020 CW5025 ... B187
2952137 ..... SNGN120416T02020 CW5025 ... B187
2952138 ..... SNGN120712T02020 CW5025 ... B188
2952139 ..... SNGN120716T02020 CW5025 ... B188
2952140 ..... SNGX120708T02020 CW5025 ... B189
2952141 ..... SNGX120712T01020FW CW5025
........................................................................ B190
2952144 ..... SNGX150716T02020 CW5025 ... B189
2952147 ..... SCGN090412T00520 CW5025 ... B186
2952153 ..... TNGN160412T02020 CW5025 ... B192
2952154 ..... TNGN220416T02020 CW5025 ... B192
2952155 ..... TPGN160308T02020 CW5025 ... B194
2952156 ..... TPGN160312T02020 CW5025 ... B194
2952157 ..... WNGX080712T02020 CW5025
........................................................................ B196
2952158 ..... CNGA120408T01020FW CW5025
........................................................................ B178
2952159 ..... CNGA120408T02020 CW5025 ... B178
2952160 ..... CNGA120412T01020FW CW5025
........................................................................ B178
2952161 ..... CNGA120412T02020 CW5025 ... B178
2952162 ..... CNGA120416T01020FW CW5025
........................................................................ B178
2952173 ..... CNGA120416T02020 CW5025 ... B178
2952174 ..... CNGA160612T02020 CW5025 ... B178
2952175 ..... CNGA160616T02020 CW5025 ... B178
2952176 ..... CNGA190612T02020 CW5025 ... B178
2952184 ..... DNGA150412T02020 CW5025... B181
2952185 ..... DNGA150612T02020 CW5025... B181
2952187 ..... SNGA120408T02020 CW5025 ... B189
2952188 ..... SNGA120412T02020 CW5025 ... B189
2952189 ..... SNGA120416T02020 CW5025 ... B189
2952190 ..... SNGA150612T02020 CW5025 ... B189
2952191 ..... SNGA150616T02020 CW5025 ... B189
2952195 ..... TNGA160408T02020 CW5025 ... B193
2952196 ..... TNGA160412T02020 CW5025 ... B193
2952197 ..... TNGA160416T02020 CW5025 ... B193
2952198 ..... VNGA160408T02020 CW5025 ... B195
2952199 ..... WNGA080408T02020 CW5025
........................................................................ B195
2952200 ..... WNGA080412T02020 CW5025
........................................................................ B195
2952201 ..... WNGA080416T02020 CW5025
........................................................................ B195
2952333 ..... 123567360 TN7525 ......................E97
2952335 ..... 123567460 TN7525 ......................E99
2952336 ..... 123567480 TN7525 ......................E99
2952337 ..... 123567803 TN7525 ....................E101
2952338 ..... 123567804 TN7525 ....................E101
2952339 ..... 123567805 TN7525 ....................E101
2952340 ..... 123567806 TN7525 ....................E101
2952341 ..... 123568080 TN7525 ....................E105
2952342 ..... 123568100 TN7525 ....................E105
2952343 ..... 123568120 TN7525 ....................E105
2952344 ..... 123568140 TN7525 ....................E105
2952345 ..... 123568160 TN7525 ....................E105
2952350 ..... 123567360 TN7535 ......................E97
2952351 ..... 123567380 TN7535 ......................E97
2952352 ..... 123567460 TN7535 ......................E99
2952353 ..... 123567480 TN7535 ......................E99
2952354 ..... 123567702 TN7535 ....................E100
2952355 ..... 123567703 TN7535 ....................E100
2952356 ..... 123567704 TN7535 ....................E100
2952357 ..... 123567720 TN7535 ....................E100
2952358 ..... 123567721 TN7535 ....................E100
2952359 ..... 123567730 TN7535 ....................E100
2952360 ..... 123567731 TN7535 ....................E100
2952361 ..... 123567740 TN7535 ....................E100
2952363 ..... 123568080 TN7535 ....................E105
2952364 ..... 123568100 TN7535 ....................E105
2952365 ..... 123568120 TN7535 ....................E105
2952366 ..... 123568140 TN7535 ....................E105
2952367 ..... 123568160 TN7535 ....................E105
2952526 ..... CNGA120404T02020 CW2015 ... B178
2952527 ..... CNGA120408T02020 CW2015 ... B178
2952528 ..... CNGA120412T02020 CW2015 ... B178
2952529 ..... CNGA160612T02020 CW2015 ... B178
2952530 ..... CNGA190612T02020 CW2015 ... B178
2952531 ..... CNGA190616T02020 CW2015 ... B178
2952532 ..... DNGA150404T02020 CW2015... B181
2952533 ..... DNGA150408T02020 CW2015... B181
2952534 ..... DNGA150412T02020 CW2015... B181
2952535 ..... DNGA150604T02020 CW2015... B181
2952536 ..... DNGA150608T02020 CW2015... B181
2952537 ..... DNGA150612T02020 CW2015... B181
2952538 ..... SNGA120408T02020 CW2015 ... B189
2952539 ..... SNGA120412T02020 CW2015 ... B189
2952540 ..... SNGA120416T02020 CW2015 ... B189
2952541 ..... TNGA160408T02020 CW2015 ... B193
2952542 ..... TNGA160412T02020 CW2015 ... B193
2952543 ..... TNGA160416T02020 CW2015 ... B193
2952544 ..... TNGA220408T02020 CW2015 ... B193
2952545 ..... VNGA160404T02020 CW2015 ... B195
2952546 ..... VNGA160408T02020 CW2015 ... B195
2952547 ..... VNGA160412T02020 CW2015 ... B195
2952548 ..... VNGA220408T02020 CW2015 ... B195
2952551 ..... CNGN120404T02020 CW2015
........................................................................ B177
2952552 ..... CNGN120408T02020 CW2015
........................................................................ B177
2952603 ..... CNGN120412T02020 CW2015
........................................................................ B177
2952604 ..... CNGN120416T02020 CW2015
........................................................................ B177
2952605 ..... CNGN120712T02020 CW2015
........................................................................ B177
2952607 ..... DNGN150704T02020 CW2015
........................................................................ B180
2952608 ..... DNGN150708T02020 CW2015
........................................................................ B180
2952609 ..... DNGN150712T02020 CW2015
........................................................................ B180
2952611 ..... ENGN130704T02020 CW2015 ... B182
2952612 ..... ENGN130708T02020 CW2015 ... B182
2952613 ..... ENGN130712T02020 CW2015 ... B182
2952614 ..... ENGN130716T02020 CW2015 ... B182
2952615 ..... RNGN090400T02020 CW2015... B184
2952616 ..... RNGN120400T02020 CW2015... B184
2952617 ..... RNGN120700T02020 CW2015... B184
2952618 ..... RNGN120700T10015 CW2015... B184
2952619 ..... RNGN120700T20015 CW2015... B184
2952620 ..... RNGN150700T02020 CW2015... B184
2952693 ..... RCGX090700T01020 CW2015 ... B183
2952694 ..... RCGX090700T02020 CW2015 ... B183
2952695 ..... RCGX090700T07015 CW2015 ... B183
2952697 ..... RCGX120700T02020 CW2015 ... B183
2952698 ..... RCGX120700T20015 CW2015 ... B183
2952699 ..... SCUN120412T00520 CW2015 ... B186
2952700 ..... SPGN090308T01020 CW2015 ... B190
2952701 ..... SPGN120304T01020 CW2015 ... B190
2952702 ..... SPGN120308T01020 CW2015 ... B190
2952703 ..... SPUN120304T00520 CW2015 ... B191
2952704 ..... SPUN120308T00520 CW2015 ... B191
2952705 ..... SPUN120312T00520 CW2015 ... B191
2952706 ..... TPGN110304T01020 CW2015 ... B194
2952707 ..... TPGN110308T01020 CW2015 ... B194
2952708 ..... TPGN110312T01020 CW2015 ... B194
2952709 ..... TPGN160304T00520 CW2015 ... B194
2952710 ..... TPGN160304T01020 CW2015 ... B194
2952711 ..... TPGN160308T00520 CW2015 ... B194
2952712 ..... TPGN160308T01020 CW2015 ... B194
2952713 ..... TPGN160312T01020 CW2015 ... B194
2952747 ..... 7F4-2016T ................................... U34
2952748 ..... SNGN090308T02020 CW2015 ... B187
2952749 ..... SNGN090412T00515 CW2015 ... B187
2952750 ..... SNGN120408T00520 CW2015 ... B187
2952751 ..... SNGN120408T02020 CW2015 ... B187
2952752 ..... SNGN120412T02020 CW2015 ... B187
2952824 ..... SNGN120704T02020 CW2015 ... B187
2952825 ..... SNGN120708T02020 CW2015 ... B187
2952826 ..... SNGN120712T02020 CW2015 ... B188
2952828 ..... SNGN120720T02020 CW2015 ... B188
2952829 ..... SNGN120720T10015 CW2015 ... B188
2952830 ..... SNGN150712T02020 CW2015 ... B188
2952831 ..... SNGN150716T02020 CW2015 ... B188
2952832 ..... SNGN190720K20015 CW2015
........................................................................ B188
2952833 ..... SNGN190720T20015 CW2015 ... B188
2952835 ..... TNGN160404T02020 CW2015 ... B192
2952836 ..... TNGN160408T02020 CW2015 ... B192
2952837 ..... TNGN160412T02020 CW2015 ... B192
2952838 ..... TNGN160416T02020 CW2015 ... B192
2952839 ..... TNGN160708T02020 CW2015 ... B192
2952840 ..... TNGN160712T02020 CW2015 ... B192
2952841 ..... TNGN220408T02020 CW2015 ... B192
2953284 ..... 123567330 TN6030 ......................E97
2953286 ..... 123567340 TN6030 ......................E97
2953289 ..... 123567320 TN6030 ......................E97
2953291 ..... 123567230 TN6030 ......................E98
2953339 ..... SNGN120712T00520 CW2015 ... B187
2953340 ..... SNGN120716T00520 CW2015 ... B188
2953432 ..... 7S7SM .......................................... U40
2953663 ..... 123567440 TN6030 ......................E99
2953666 ..... 123567380 TN6030 ......................E97
2953667 ..... 123567240 TN6030 ......................E98
2953671 ..... 123567450 TN6030 ......................E99
2953672 ..... 123567231 TN6030 ......................E98
2953673 ..... 123567350 TN6030 ......................E97
2953674 ..... 123567360 TN6030 ......................E97
2953675 ..... 123567480 TN6030 ......................E99
2953676 ..... 123567241 TN6030 ......................E98
2953677 ..... 123567460 TN6030 ......................E99
2953678 ..... 123567430 TN6030 ......................E99
2953679 ..... 123567420 TN6030 ......................E99
2957427 ..... RCMT1606M0TX TN6540 .............M97
2957428 ..... RDMT1003M0T TN6540 ...............M81
2957429 ..... RDMT1003M0T TN6525 ...............M81
2957430 ..... RDMT1204M0TX TN6525 .............M87
2957432 ..... RDMT1204M0TX TN6540 .............M87
Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 16 11/2/15 10:33 AM
LViWID M 16 I d Z002 Z145 M i REBRANDO b 28 20153 09PM
Z17
widia.com
Index by Order Number
Order No. Catalogue No. Page(s)
2957533 ..... RDMT1605M0TX TN6540 .............M92
2957535 ..... RCMT1606M0TX TN6525 .............M97
2957536 ..... RDMT1605M0TX TN6525 .............M92
2957537 ..... RCMT1606M043M TN6540 ..........M97
2957538 ..... M270BF12 TN6525 ................... M108
2957539 ..... M270BR12 TN6540 ................... M109
2957540 ..... M270BR16 TN6540 ................... M109
2957541 ..... M270BF16 TN6525 ................... M108
2957542 ..... M270BF20 TN6525 ................... M108
2957543 ..... M270BR20 TN6540 ................... M109
2957546 ..... HPGT06T3DZENGD TN6540 .......... H47
2957547 ..... HPGT06T3DZERLD TN6525 .......... H46
2957548 ..... HPGT06T3DZFRLDAL TN6501....... H46
2957549 ..... HPGT06T3DZERGD3W TN6510 ..... H47
2957552 ..... HPPT06T3DZENGD TN6540 .......... H47
2957583 ..... HPPT06T3DZENGD TN6520 .......... H47
2957584 ..... HPGT06T3DZERGD3W TN6525 ..... H47
2957585 ..... HPGT06T3DZERLD TN6520 .......... H46
2957586 ..... HPPT06T3DZENGD TN6525 .......... H47
2957587 ..... HPGT06T3DZERLD TN6540 .......... H46
2957588 ..... HPGT06T3DZENGD TN6525 .......... H47
2957589 ..... HPGT06T3DZENGD TN6510 .......... H47
2961525 ..... M40227 .......................................... R6
2961641 ..... 7F5-2756A ................................... U36
2962743 ..... 12250023000 W .........................E102
2962744 ..... 12250023100 W .........................E102
2962745 ..... 12250023200 W .........................E102
2962751 ..... 12250025200 W .........................E102
2964201 ..... SNKT1205AZER20 TN6540 ........... H54
2964204 ..... SNMT1205AZR31 TN6540 ............ H55
2964205 ..... SNKT1205AZR31 TN6540............. H55
2964206 ..... SNMT1205AZR31 TN6525 ............ H55
2964208 ..... SNKT1205AZR31 TN6525............. H55
2964222 ..... TDS301A03000 WU25PD ..............T78
2964233 ..... TDS301A03100 WU25PD ..............T78
2964234 ..... TDS301A03200 WU25PD ..............T78
2964235 ..... TDS301A03250 WU25PD ..............T78
2964236 ..... TDS301A03300 WU25PD ..............T78
2964237 ..... TDS301A03400 WU25PD ..............T78
2964238 ..... TDS301A03500 WU25PD ..............T78
2964239 ..... TDS301A03600 WU25PD ..............T78
2964240 ..... TDS301A03700 WU25PD ..............T78
2964241 ..... TDS301A03800 WU25PD ..............T78
2964242 ..... TDS301A03900 WU25PD ..............T78
2964243 ..... TDS301A04000 WU25PD ..............T78
2964244 ..... TDS301A04100 WU25PD ..............T78
2964245 ..... TDS301A04200 WU25PD ..............T78
2964246 ..... TDS301A04300 WU25PD ..............T78
2964247 ..... TDS301A04370 WU25PD ..............T78
2964248 ..... TDS301A04400 WU25PD ..............T78
2964249 ..... TDS301A04500 WU25PD ..............T78
2964250 ..... TDS301A04600 WU25PD ..............T78
2964251 ..... TDS301A04650 WU25PD ..............T78
2964252 ..... TDS301A04700 WU25PD ..............T78
2964273 ..... TDS301A04760 WU25PD ..............T78
2964274 ..... TDS301A04800 WU25PD ..............T78
2964275 ..... TDS301A04900 WU25PD ..............T78
2964276 ..... TDS301A05000 WU25PD ..............T79
2964277 ..... TDS301A05100 WU25PD ..............T79
2964278 ..... TDS301A05160 WU25PD ..............T79
2964279 ..... TDS301A05200 WU25PD ..............T79
2964280 ..... TDS301A05300 WU25PD ..............T79
2964281 ..... TDS301A05400 WU25PD ..............T79
2964282 ..... TDS301A05500 WU25PD ..............T79
2964293 ..... TDS301A05550 WU25PD ..............T79
2964294 ..... TDS301A05560 WU25PD ..............T79
2964295 ..... TDS301A05600 WU25PD ..............T79
2964296 ..... TDS301A05700 WU25PD ..............T79
2964297 ..... TDS301A05800 WU25PD ..............T79
2964298 ..... TDS301A05900 WU25PD ..............T79
2964299 ..... TDS301A05950 WU25PD ..............T79
2964300 ..... TDS301A06000 WU25PD ..............T79
2964301 ..... TDS301A06100 WU25PD ..............T79
2964302 ..... TDS301A06200 WU25PD ..............T79
2964313 ..... TDS301A06300 WU25PD ..............T79
2964314 ..... TDS301A06350 WU25PD ..............T79
2964315 ..... TDS301A06400 WU25PD ..............T79
2964316 ..... TDS301A06500 WU25PD ..............T79
2964317 ..... TDS301A06600 WU25PD ..............T79
2964318 ..... TDS301A06700 WU25PD ..............T79
2964319 ..... TDS301A06750 WU25PD ..............T79
2964320 ..... TDS301A06800 WU25PD ..............T79
2964321 ..... TDS301A06900 WU25PD ..............T79
2964322 ..... TDS301A07000 WU25PD ..............T79
2964333 ..... TDS301A07100 WU25PD ..............T79
2964334 ..... TDS301A07140 WU25PD ..............T79
2964335 ..... TDS301A07200 WU25PD ..............T79
2964336 ..... TDS301A07300 WU25PD ..............T79
2964337 ..... TDS301A07400 WU25PD ..............T79
2964338 ..... TDS301A07500 WU25PD ..............T79
2964339 ..... TDS301A07540 WU25PD ..............T79
2964340 ..... TDS301A07600 WU25PD ..............T79
2964341 ..... TDS301A07700 WU25PD ..............T79
2964342 ..... TDS301A07800 WU25PD ..............T79
2964353 ..... TDS301A07900 WU25PD ..............T79
2964354 ..... TDS301A07940 WU25PD ..............T79
2964355 ..... TDS301A08000 WU25PD ..............T79
2964356 ..... TDS301A08100 WU25PD ..............T80
2964357 ..... TDS301A08200 WU25PD ..............T80
2964358 ..... TDS301A08300 WU25PD ..............T80
2964359 ..... TDS301A08330 WU25PD ..............T80
2964360 ..... TDS301A08400 WU25PD ..............T80
2964361 ..... TDS301A08500 WU25PD ..............T80
2964362 ..... TDS301A08600 WU25PD ..............T80
2964373 ..... TDS301A08700 WU25PD ..............T80
2964374 ..... TDS301A08800 WU25PD ..............T80
2964375 ..... TDS301A08900 WU25PD ..............T80
2964376 ..... TDS301A09000 WU25PD ..............T80
2964377 ..... TDS301A09100 WU25PD ..............T80
2964378 ..... TDS301A09130 WU25PD ..............T80
2964379 ..... TDS301A09200 WU25PD ..............T80
2964380 ..... TDS301A09300 WU25PD ..............T80
2964381 ..... TDS301A09400 WU25PD ..............T80
2964382 ..... TDS301A09500 WU25PD ..............T80
2964393 ..... TDS301A09520 WU25PD ..............T80
2964394 ..... TDS301A09600 WU25PD ..............T80
2964395 ..... TDS301A09700 WU25PD ..............T80
2964396 ..... TDS301A09800 WU25PD ..............T80
2964397 ..... TDS301A09900 WU25PD ..............T80
2964398 ..... TDS301A09920 WU25PD ..............T80
2964399 ..... TDS301A10000 WU25PD ..............T80
2964400 ..... TDS301A10100 WU25PD ..............T80
2964401 ..... TDS301A10200 WU25PD ..............T80
2964402 ..... TDS301A10300 WU25PD ..............T80
2964413 ..... TDS301A10320 WU25PD ..............T80
2964414 ..... TDS301A10400 WU25PD ..............T80
2964415 ..... TDS301A10500 WU25PD ..............T80
2964416 ..... TDS301A10600 WU25PD ..............T80
2964417 ..... TDS301A10700 WU25PD ..............T80
2964418 ..... TDS301A10720 WU25PD ..............T80
2964419 ..... TDS301A10800 WU25PD ..............T80
2964420 ..... TDS301A10900 WU25PD ..............T80
2964421 ..... TDS301A11000 WU25PD ..............T80
2964423 ..... TDS301A11100 WU25PD ..............T80
2964424 ..... TDS301A11110 WU25PD ..............T80
2964425 ..... TDS301A11200 WU25PD ..............T80
2964426 ..... TDS301A11300 WU25PD ..............T80
2964427 ..... TDS301A11400 WU25PD ..............T81
2964428 ..... TDS301A11500 WU25PD ..............T81
2964429 ..... TDS301A11600 WU25PD ..............T81
2964430 ..... TDS301A11700 WU25PD ..............T81
2964431 ..... TDS301A11800 WU25PD ..............T81
2964432 ..... TDS301A11900 WU25PD ..............T81
2964433 ..... TDS301A11910 WU25PD ..............T81
2964434 ..... TDS301A12000 WU25PD ..............T81
2964435 ..... TDS301A12300 WU25PD ..............T81
2964436 ..... TDS301A12500 WU25PD ..............T81
2964437 ..... TDS301A12700 WU25PD ..............T81
2964438 ..... TDS301A12800 WU25PD ..............T81
2964439 ..... TDS301A13000 WU25PD ..............T81
2964440 ..... TDS301A13500 WU25PD ..............T81
2964441 ..... TDS301A13800 WU25PD ..............T81
2964442 ..... TDS301A14000 WU25PD ..............T81
2964443 ..... TDS301A14290 WU25PD ..............T81
2964444 ..... TDS301A14500 WU25PD ..............T81
2964445 ..... TDS301A14800 WU25PD ..............T81
2964446 ..... TDS301A15000 WU25PD ..............T81
2964447 ..... TDS301A15500 WU25PD ..............T81
2964448 ..... TDS301A15800 WU25PD ..............T81
2964449 ..... TDS301A15870 WU25PD ..............T81
2964450 ..... TDS301A16000 WU25PD ..............T81
2964451 ..... TDS301A16500 WU25PD ..............T81
2964452 ..... TDS301A16670 WU25PD ..............T81
2964453 ..... TDS301A16800 WU25PD ..............T81
2964454 ..... TDS301A17000 WU25PD ..............T81
2964455 ..... TDS301A17500 WU25PD ..............T81
2964456 ..... TDS301A17800 WU25PD ..............T81
2964457 ..... TDS301A18000 WU25PD ..............T81
2964458 ..... TDS301A18500 WU25PD ..............T81
2964459 ..... TDS301A18800 WU25PD ..............T81
2964460 ..... TDS301A19000 WU25PD ..............T81
2964461 ..... TDS301A19050 WU25PD ..............T81
2964462 ..... TDS301A19500 WU25PD ..............T81
2964463 ..... TDS301A19800 WU25PD ..............T81
2964464 ..... TDS301A20000 WU25PD ..............T81
2964736 ..... TDS501A11200 WU25PD ..............T85
2964737 ..... TDS501A11300 WU25PD ..............T85
2964738 ..... TDS501A11400 WU25PD ..............T85
2964739 ..... TDS501A11500 WU25PD ..............T85
2964740 ..... TDS501A11600 WU25PD ..............T85
2964741 ..... TDS501A11700 WU25PD ..............T85
2964742 ..... TDS501A11800 WU25PD ..............T85
2964803 ..... TDS502A03000 WU25PD ..............T87
2964804 ..... TDS502A03100 WU25PD ..............T87
2964805 ..... TDS502A03200 WU25PD ..............T87
2964806 ..... TDS502A03250 WU25PD ..............T87
2964807 ..... TDS502A03300 WU25PD ..............T87
2964808 ..... TDS502A03400 WU25PD ..............T87
2964809 ..... TDS502A03500 WU25PD ..............T87
2964810 ..... TDS502A03600 WU25PD ..............T87
2964811 ..... TDS502A03700 WU25PD ..............T87
2964812 ..... TDS502A03800 WU25PD ..............T87
2964813 ..... TDS502A03900 WU25PD ..............T87
2964814 ..... TDS502A04000 WU25PD ..............T87
2964815 ..... TDS502A04100 WU25PD ..............T87
2964816 ..... TDS502A04200 WU25PD ..............T87
2964817 ..... TDS502A04300 WU25PD ..............T87
2964818 ..... TDS502A04370 WU25PD ..............T87
2964819 ..... TDS502A04400 WU25PD ..............T87
2964820 ..... TDS502A04500 WU25PD ..............T87
2964821 ..... TDS502A04600 WU25PD ..............T87
2964822 ..... TDS502A04650 WU25PD ..............T87
2964823 ..... TDS502A04700 WU25PD ..............T87
2964824 ..... TDS502A04760 WU25PD ..............T87
2964825 ..... TDS502A04800 WU25PD ..............T88
2964826 ..... TDS502A04900 WU25PD ..............T88
2964827 ..... TDS502A05000 WU25PD ..............T88
2964828 ..... TDS502A05100 WU25PD ..............T88
2964829 ..... TDS502A05160 WU25PD ..............T88
2964830 ..... TDS502A05200 WU25PD ..............T88
2964831 ..... TDS502A05300 WU25PD ..............T88
2964832 ..... TDS502A05400 WU25PD ..............T88
2964833 ..... TDS502A05500 WU25PD ..............T88
2964834 ..... TDS502A05550 WU25PD ..............T88
2964835 ..... TDS502A05560 WU25PD ..............T88
2964836 ..... TDS502A05600 WU25PD ..............T88
2964837 ..... TDS502A05700 WU25PD ..............T88
2964838 ..... TDS502A05800 WU25PD ..............T88
2964839 ..... TDS502A05900 WU25PD ..............T88
2964840 ..... TDS502A05950 WU25PD ..............T88
2964841 ..... TDS502A06000 WU25PD ..............T88
2964842 ..... TDS502A06100 WU25PD ..............T88
2964843 ..... TDS502A06200 WU25PD ..............T88
2964844 ..... TDS502A06300 WU25PD ..............T88
2964845 ..... TDS502A06350 WU25PD ..............T88
2964846 ..... TDS502A06400 WU25PD ..............T88
2964847 ..... TDS502A06500 WU25PD ..............T88
2964848 ..... TDS502A06600 WU25PD ..............T88
2964849 ..... TDS502A06700 WU25PD ..............T88
2964850 ..... TDS502A06750 WU25PD ..............T88
2964851 ..... TDS502A06800 WU25PD ..............T88
2964852 ..... TDS502A06900 WU25PD ..............T88
2964853 ..... TDS502A07000 WU25PD ..............T88
2964854 ..... TDS502A07100 WU25PD ..............T88
2964855 ..... TDS502A07140 WU25PD ..............T88
2964856 ..... TDS502A07200 WU25PD ..............T88
2964857 ..... TDS502A07300 WU25PD ..............T88
2964858 ..... TDS502A07400 WU25PD ..............T88
2964859 ..... TDS502A07500 WU25PD ..............T88
2964860 ..... TDS502A07540 WU25PD ..............T88
2964861 ..... TDS502A07600 WU25PD ..............T88
2964862 ..... TDS502A07700 WU25PD ..............T88
2964863 ..... TDS502A07800 WU25PD ..............T88
2964864 ..... TDS502A07900 WU25PD ..............T88
2964865 ..... TDS502A07940 WU25PD ..............T89
2964866 ..... TDS502A08000 WU25PD ..............T89
2964867 ..... TDS502A08100 WU25PD ..............T89
2964868 ..... TDS502A08200 WU25PD ..............T89
2964869 ..... TDS502A08300 WU25PD ..............T89
2964870 ..... TDS502A08330 WU25PD ..............T89
2964871 ..... TDS502A08400 WU25PD ..............T89
2964872 ..... TDS502A08500 WU25PD ..............T89
2964873 ..... TDS502A08600 WU25PD ..............T89
2964874 ..... TDS502A08700 WU25PD ..............T89
2964875 ..... TDS502A08800 WU25PD ..............T89
2964876 ..... TDS502A08900 WU25PD ..............T89
2964877 ..... TDS502A09000 WU25PD ..............T89
2964878 ..... TDS502A09100 WU25PD ..............T89
2964879 ..... TDS502A09130 WU25PD ..............T89
2964880 ..... TDS502A09200 WU25PD ..............T89
2964881 ..... TDS502A09300 WU25PD ..............T89
2964882 ..... TDS502A09400 WU25PD ..............T89
2964883 ..... TDS502A09500 WU25PD ..............T89
2964884 ..... TDS502A09520 WU25PD ..............T89
Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 17 11/2/15 10:33 AM
LViWID M 16 I d Z002 Z145 M i REBRAND O b 28 2015 3 09 PM
Z18 widia.com
Index by Order Number
Order No. Catalogue No. Page(s)
2964885 ..... TDS502A09600 WU25PD ..............T89
2964886 ..... TDS502A09700 WU25PD ..............T89
2964887 ..... TDS502A09800 WU25PD ..............T89
2964888 ..... TDS502A09900 WU25PD ..............T89
2964889 ..... TDS502A09920 WU25PD ..............T89
2964890 ..... TDS502A10000 WU25PD ..............T89
2964891 ..... TDS502A10100 WU25PD ..............T89
2964892 ..... TDS502A10200 WU25PD ..............T89
2964893 ..... TDS502A10300 WU25PD ..............T89
2964894 ..... TDS502A10320 WU25PD ..............T89
2964895 ..... TDS502A10400 WU25PD ..............T89
2964896 ..... TDS502A10500 WU25PD ..............T89
2964897 ..... TDS502A10600 WU25PD ..............T89
2964898 ..... TDS502A10700 WU25PD ..............T89
2964899 ..... TDS502A10720 WU25PD ..............T89
2964900 ..... TDS502A10800 WU25PD ..............T89
2964901 ..... TDS502A10900 WU25PD ..............T89
2964902 ..... TDS502A11000 WU25PD ..............T89
2964903 ..... TDS502A11100 WU25PD ..............T89
2964904 ..... TDS502A11110 WU25PD ..............T89
2964905 ..... TDS502A11200 WU25PD ..............T90
2964906 ..... TDS502A11300 WU25PD ..............T90
2964947 ..... TDS501A03000 WU25PD ..............T82
2964948 ..... TDS501A03100 WU25PD ..............T82
2964949 ..... TDS501A03200 WU25PD ..............T82
2964950 ..... TDS501A03250 WU25PD ..............T82
2964951 ..... TDS501A03300 WU25PD ..............T82
2964952 ..... TDS501A03400 WU25PD ..............T82
2964953 ..... TDS501A03500 WU25PD ..............T82
2964954 ..... TDS501A03600 WU25PD ..............T82
2964955 ..... TDS501A03700 WU25PD ..............T82
2964956 ..... TDS501A03800 WU25PD ..............T82
2964957 ..... TDS501A03900 WU25PD ..............T82
2964958 ..... TDS501A04000 WU25PD ..............T82
2964959 ..... TDS501A04100 WU25PD ..............T82
2964960 ..... TDS501A04200 WU25PD ..............T82
2964961 ..... TDS501A04300 WU25PD ..............T82
2964962 ..... TDS501A04370 WU25PD ..............T82
2964963 ..... TDS501A04400 WU25PD ..............T82
2964964 ..... TDS501A04500 WU25PD ..............T82
2964965 ..... TDS501A04600 WU25PD ..............T82
2964966 ..... TDS501A04650 WU25PD ..............T82
2964967 ..... TDS501A04700 WU25PD ..............T83
2964969 ..... TDS501A04800 WU25PD ..............T83
2964970 ..... TDS501A04900 WU25PD ..............T83
2964971 ..... TDS501A05000 WU25PD ..............T83
2964972 ..... TDS501A05100 WU25PD ..............T83
2964973 ..... TDS501A05160 WU25PD ..............T83
2964974 ..... TDS501A05200 WU25PD ..............T83
2964975 ..... TDS501A05300 WU25PD ..............T83
2964976 ..... TDS501A05400 WU25PD ..............T83
2964977 ..... TDS501A05500 WU25PD ..............T83
2964978 ..... TDS501A05550 WU25PD ..............T83
2964980 ..... TDS501A05600 WU25PD ..............T83
2964981 ..... TDS501A05700 WU25PD ..............T83
2964982 ..... TDS501A05800 WU25PD ..............T83
2964983 ..... TDS501A05900 WU25PD ..............T83
2964984 ..... TDS501A05950 WU25PD ..............T83
2964985 ..... TDS501A06000 WU25PD ..............T83
2964986 ..... TDS501A06100 WU25PD ..............T83
2964987 ..... TDS501A06200 WU25PD ..............T83
2964988 ..... TDS501A06300 WU25PD ..............T83
2964989 ..... TDS501A06350 WU25PD ..............T83
2964990 ..... TDS501A06400 WU25PD ..............T83
2964991 ..... TDS501A06500 WU25PD ..............T83
2964992 ..... TDS501A06600 WU25PD ..............T83
2964993 ..... TDS501A06700 WU25PD ..............T83
2964995 ..... TDS501A06800 WU25PD ..............T83
2964996 ..... TDS501A06900 WU25PD ..............T83
2964997 ..... TDS501A07000 WU25PD ..............T83
2964998 ..... TDS501A07100 WU25PD ..............T83
2965000 ..... TDS501A07200 WU25PD ..............T83
2965001 ..... TDS501A07300 WU25PD ..............T83
2965002 ..... TDS501A07400 WU25PD ..............T83
2965003 ..... TDS501A07500 WU25PD ..............T83
2965004 ..... TDS501A07541 WU25PD ..............T83
2965005 ..... TDS501A07600 WU25PD ..............T84
2965006 ..... TDS501A07700 WU25PD ..............T84
2965007 ..... TDS501A07800 WU25PD ..............T84
2965008 ..... TDS501A07900 WU25PD ..............T84
2965010 ..... TDS501A08000 WU25PD ..............T84
2965011 ..... TDS501A08100 WU25PD ..............T84
2965012 ..... TDS501A08200 WU25PD ..............T84
2965013 ..... TDS501A08300 WU25PD ..............T84
2965015 ..... TDS501A08400 WU25PD ..............T84
2965016 ..... TDS501A08500 WU25PD ..............T84
2965017 ..... TDS501A08600 WU25PD ..............T84
2965018 ..... TDS501A08700 WU25PD ..............T84
2965019 ..... TDS501A08800 WU25PD ..............T84
2965020 ..... TDS501A08900 WU25PD ..............T84
2965021 ..... TDS501A09000 WU25PD ..............T84
2965022 ..... TDS501A09100 WU25PD ..............T84
2965023 ..... TDS501A09129 WU25PD ..............T84
2965024 ..... TDS501A09200 WU25PD ..............T84
2965025 ..... TDS501A09300 WU25PD ..............T84
2965026 ..... TDS501A09400 WU25PD ..............T84
2965027 ..... TDS501A09500 WU25PD ..............T84
2965029 ..... TDS501A09600 WU25PD ..............T84
2965030 ..... TDS501A09700 WU25PD ..............T84
2965031 ..... TDS501A09800 WU25PD ..............T84
2965032 ..... TDS501A09900 WU25PD ..............T84
2965033 ..... TDS501A09921 WU25PD ..............T84
2965034 ..... TDS501A10000 WU25PD ..............T84
2965035 ..... TDS501A10100 WU25PD ..............T84
2965036 ..... TDS501A10200 WU25PD ..............T84
2965037 ..... TDS501A10300 WU25PD ..............T84
2965038 ..... TDS501A10320 WU25PD ..............T84
2965039 ..... TDS501A10400 WU25PD ..............T84
2965040 ..... TDS501A10500 WU25PD ..............T84
2965041 ..... TDS501A10600 WU25PD ..............T84
2965042 ..... TDS501A10700 WU25PD ..............T85
2965044 ..... TDS501A10800 WU25PD ..............T85
2965045 ..... TDS501A10900 WU25PD ..............T85
2965046 ..... TDS501A11000 WU25PD ..............T85
2965047 ..... TDS501A11100 WU25PD ..............T85
2965048 ..... TDS501A11113 WU25PD ..............T85
2965053 ..... TDS501A11900 WU25PD ..............T85
2965054 ..... TDS501A11910 WU25PD ..............T85
2965055 ..... TDS501A12000 WU25PD ..............T85
2965056 ..... TDS501A12300 WU25PD ..............T85
2965057 ..... TDS501A12500 WU25PD ..............T85
2965058 ..... TDS501A12700 WU25PD ..............T85
2965059 ..... TDS501A12800 WU25PD ..............T85
2965060 ..... TDS501A13000 WU25PD ..............T85
2965061 ..... TDS501A13500 WU25PD ..............T85
2965062 ..... TDS501A13800 WU25PD ..............T85
2965063 ..... TDS501A14000 WU25PD ..............T85
2965064 ..... TDS501A14290 WU25PD ..............T85
2965065 ..... TDS501A14500 WU25PD ..............T85
2965066 ..... TDS501A14800 WU25PD ..............T85
2965067 ..... TDS501A15000 WU25PD ..............T85
2965068 ..... TDS501A15500 WU25PD ..............T85
2965069 ..... TDS501A15800 WU25PD ..............T85
2965070 ..... TDS501A15870 WU25PD ..............T85
2965071 ..... TDS501A16000 WU25PD ..............T85
2965072 ..... TDS501A16500 WU25PD ..............T85
2965073 ..... TDS501A16670 WU25PD ..............T85
2965074 ..... TDS501A16800 WU25PD ..............T85
2965075 ..... TDS501A17000 WU25PD ..............T85
2965076 ..... TDS501A17500 WU25PD ..............T85
2965077 ..... TDS501A17800 WU25PD ..............T86
2965078 ..... TDS501A18000 WU25PD ..............T86
2965079 ..... TDS501A18500 WU25PD ..............T86
2965080 ..... TDS501A18800 WU25PD ..............T86
2965081 ..... TDS501A19000 WU25PD ..............T86
2965082 ..... TDS501A19050 WU25PD ..............T86
2965083 ..... TDS501A19500 WU25PD ..............T86
2965084 ..... TDS501A19800 WU25PD ..............T86
2965085 ..... TDS501A20000 WU25PD ..............T86
2967699 ..... 7F2-1266T ................................... U31
2968374 ..... TDS502A11400 WU25PD ..............T90
2968375 ..... TDS502A11500 WU25PD ..............T90
2968376 ..... TDS502A11600 WU25PD ..............T90
2968377 ..... TDS502A11700 WU25PD ..............T90
2968378 ..... TDS502A11800 WU25PD ..............T90
2968379 ..... TDS502A11900 WU25PD ..............T90
2968380 ..... TDS502A11910 WU25PD ..............T90
2968381 ..... TDS502A12000 WU25PD ..............T90
2968382 ..... TDS502A12300 WU25PD ..............T90
2968393 ..... TDS502A12500 WU25PD ..............T90
2968394 ..... TDS502A12700 WU25PD ..............T90
2968395 ..... TDS502A12800 WU25PD ..............T90
2968396 ..... TDS502A13000 WU25PD ..............T90
2968397 ..... TDS502A13500 WU25PD ..............T90
2968398 ..... TDS502A13800 WU25PD ..............T90
2968399 ..... TDS502A14000 WU25PD ..............T90
2968400 ..... TDS502A14290 WU25PD ..............T90
2968401 ..... TDS502A14500 WU25PD ..............T90
2968402 ..... TDS502A14800 WU25PD ..............T90
2968403 ..... TDS502A15000 WU25PD ..............T90
2968404 ..... TDS502A15500 WU25PD ..............T90
2968405 ..... TDS502A15800 WU25PD ..............T90
2968406 ..... TDS502A15870 WU25PD ..............T90
2968407 ..... TDS502A16000 WU25PD ..............T90
2968408 ..... TDS502A16500 WU25PD ..............T90
2968409 ..... TDS502A16670 WU25PD ..............T90
2968410 ..... TDS502A16800 WU25PD ..............T90
2968411 ..... TDS502A17000 WU25PD ..............T90
2968412 ..... TDS502A17500 WU25PD ..............T90
2968413 ..... TDS502A17800 WU25PD ..............T90
2968414 ..... TDS502A18000 WU25PD ..............T90
2968415 ..... TDS502A18500 WU25PD ..............T90
2968416 ..... TDS502A18800 WU25PD ..............T90
2968417 ..... TDS502A19000 WU25PD ..............T90
2968418 ..... TDS502A19050 WU25PD ..............T90
2968419 ..... TDS502A19500 WU25PD ..............T90
2968420 ..... TDS502A19800 WU25PD ..............T90
2968421 ..... TDS502A20000 WU25PD ..............T90
2968422 ..... TDS503A03000 WU25PD ..............T91
2968503 ..... TDS503A03300 WU25PD ..............T91
2968504 ..... TDS503A03500 WU25PD ..............T91
2968505 ..... TDS503A03700 WU25PD ..............T91
2968506 ..... TDS503A03800 WU25PD ..............T91
2968507 ..... TDS503A04000 WU25PD ..............T91
2968508 ..... TDS503A04200 WU25PD ..............T91
2968509 ..... TDS503A04370 WU25PD ..............T91
2968510 ..... TDS503A04500 WU25PD ..............T91
2968511 ..... TDS503A04700 WU25PD ..............T91
2968512 ..... TDS503A04760 WU25PD ..............T91
2968513 ..... TDS503A04800 WU25PD ..............T91
2968514 ..... TDS503A05000 WU25PD ..............T92
2968515 ..... TDS503A05160 WU25PD ..............T92
2968516 ..... TDS503A05500 WU25PD ..............T92
2968517 ..... TDS503A05560 WU25PD ..............T92
2968518 ..... TDS503A05800 WU25PD ..............T92
2968519 ..... TDS503A05950 WU25PD ..............T92
2968520 ..... TDS503A06000 WU25PD ..............T92
2968521 ..... TDS503A06350 WU25PD ..............T92
2968522 ..... TDS503A06500 WU25PD ..............T92
2968523 ..... TDS503A06750 WU25PD ..............T92
2968524 ..... TDS503A06800 WU25PD ..............T92
2968525 ..... TDS503A07000 WU25PD ..............T92
2968526 ..... TDS503A07140 WU25PD ..............T92
2968527 ..... TDS503A07500 WU25PD ..............T92
2968528 ..... TDS503A07540 WU25PD ..............T92
2968529 ..... TDS503A07800 WU25PD ..............T92
2968530 ..... TDS503A07940 WU25PD ..............T92
2968531 ..... TDS503A08000 WU25PD ..............T93
2968532 ..... TDS503A08330 WU25PD ..............T93
2968533 ..... TDS503A08500 WU25PD ..............T93
2968534 ..... TDS503A09000 WU25PD ..............T93
2968535 ..... TDS503A09130 WU25PD ..............T93
2968536 ..... TDS503A09500 WU25PD ..............T93
2968537 ..... TDS503A09520 WU25PD ..............T93
2968538 ..... TDS503A09800 WU25PD ..............T93
2968539 ..... TDS503A09920 WU25PD ..............T93
2968540 ..... TDS503A10000 WU25PD ..............T93
2968541 ..... TDS503A10200 WU25PD ..............T93
2968542 ..... TDS503A10320 WU25PD ..............T93
2968543 ..... TDS503A10500 WU25PD ..............T93
2968544 ..... TDS503A10720 WU25PD ..............T93
2968545 ..... TDS503A10800 WU25PD ..............T93
2968546 ..... TDS503A11000 WU25PD ..............T93
2968547 ..... TDS503A11500 WU25PD ..............T94
2968548 ..... TDS503A11800 WU25PD ..............T94
2968549 ..... TDS503A11910 WU25PD ..............T94
2968550 ..... TDS503A12000 WU25PD ..............T94
2968551 ..... TDS503A12300 WU25PD ..............T94
2968552 ..... TDS503A12500 WU25PD ..............T94
2968553 ..... TDS503A12700 WU25PD ..............T94
2968554 ..... TDS503A12800 WU25PD ..............T94
2968555 ..... TDS503A13000 WU25PD ..............T94
2968556 ..... TDS503A13500 WU25PD ..............T94
2968557 ..... TDS503A13800 WU25PD ..............T94
2968558 ..... TDS503A14000 WU25PD ..............T94
2968559 ..... TDS503A14290 WU25PD ..............T94
2968560 ..... TDS503A14500 WU25PD ..............T94
2968561 ..... TDS503A14800 WU25PD ..............T94
2968562 ..... TDS503A15000 WU25PD ..............T94
2968563 ..... TDS503A15500 WU25PD ..............T94
2968564 ..... TDS503A15800 WU25PD ..............T94
2968565 ..... TDS503A15870 WU25PD ..............T94
2968566 ..... TDS503A16000 WU25PD ..............T94
2969583 ..... M41372 ........................................ R10
2972689 ..... 7F7-3813A ................................... U37
2973335 ..... M41345 .......................................... R9
2978948 ..... M40582 ........................................ R14
2979468 ..... M41235 .......................................... R6
2979470 ..... M40272 .......................................... R7
2981749 ..... M40271 .......................................... R7
2981799 ..... M40436 ........................................ R12
2986664 ..... M40268 .......................................... R7
2986716 ..... 7S3SE ........................................... U41
2987322 ..... M41457 ........................................ R13
Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 18 11/2/15 10:33 AM
LViWID M 16 I d Z002 Z145 M i REBRANDO b 28 20153 09PM
Z19
widia.com
Index by Order Number
Order No. Catalogue No. Page(s)
2987323 ..... M41455 ........................................ R13
2987326 ..... M41436 ........................................ R12
2987327 ..... M41435 ........................................ R12
2987329 ..... M41433 ........................................ R12
2987331 ..... M41398 ........................................ R11
2987333 ..... M41370 ........................................ R10
2987334 ..... M41349 .......................................... R9
2987335 ..... M41346 .......................................... R9
2987336 ..... M41314 .......................................... R8
2987337 ..... M41274 .......................................... R7
2987338 ..... M41272 .......................................... R7
2987339 ..... M41271 .......................................... R7
2987340 ..... M41270 .......................................... R7
2987341 ..... M41269 .......................................... R7
2987342 ..... M41268 .......................................... R7
2987343 ..... M41239 .......................................... R6
2987345 ..... M40590 ........................................ R18
2987348 ..... M40574 ........................................ R10
2987349 ..... M40561 .......................................... R8
2987350 ..... M40551 .......................................... R6
2987352 ..... M40497 ........................................ R15
2987353 ..... M40455 ........................................ R13
2987354 ..... M40396 ........................................ R11
2990411 ..... M40237 .......................................... R6
2990413 ..... M40498 ........................................ R15
2990415 ..... M41303 .......................................... R8
2990416 ..... M41351 .......................................... R9
2990417 ..... M41496 ........................................ R15
2990418 ..... M41502 ........................................ R15
2990812 ..... 6N7006002LT ................................. Q6
2991245 ..... M40232 .......................................... R6
2991248 ..... M40303 .......................................... R8
2991249 ..... M40310 .......................................... R8
2991252 ..... M40349 .......................................... R9
2991254 ..... M40352 .......................................... R9
2991255 ..... M40354 .......................................... R9
2991256 ..... M40370 ........................................ R10
2991258 ..... M40428 ........................................ R12
2991261 ..... M40434 ........................................ R12
2991264 ..... M40555 .......................................... R6
2991265 ..... M40568 .......................................... R9
2991266 ..... M40572 .......................................... R9
2991268 ..... M40585 ........................................ R14
2991270 ..... M41225 .......................................... R6
2991272 ..... M41276 .......................................... R7
2991273 ..... M41308 .......................................... R8
2991274 ..... M41318 .......................................... R8
2991275 ..... M41320 .......................................... R8
2991276 ..... M41350 .......................................... R9
2991277 ..... M41371 ........................................ R10
2991278 ..... M41375 ........................................ R10
2991284 ..... M41454 ........................................ R13
2991803 ..... M40368 ........................................ R10
2991807 ..... M40452 ........................................ R13
2991809 ..... M40477 ........................................ R14
2991812 ..... M41262 .......................................... R7
2991813 ..... M41265 .......................................... R7
2991815 ..... M41369 ........................................ R10
2991816 ..... M41377 ........................................ R10
2991818 ..... M41519 ........................................ R16
2992083 ..... 6N7008004LT ................................. Q6
2992087 ..... 6N7025008LT ................................. Q6
3005591 ..... M41319 .......................................... R8
3009447 ..... M40222 .......................................... R6
3009448 ..... M40223 .......................................... R6
3009451 ..... M40242 .......................................... R6
3009453 ..... M40263 .......................................... R7
3009454 ..... M40267 .......................................... R7
3009458 ..... M40346 .......................................... R9
3009463 ..... M40406 ........................................ R11
3009465 ..... M40431 ........................................ R12
3009471 ..... M40454 ........................................ R13
3009475 ..... M40478 ........................................ R14
3009478 ..... M40516 ........................................ R16
3009484 ..... M40567 .......................................... R9
3009487 ..... M40576 ........................................ R11
3009488 ..... M40595 ........................................ R18
3009494 ..... M41245 .......................................... R6
3009496 ..... M41266 .......................................... R7
3009499 ..... M41317 .......................................... R8
3009500 ..... M41354 .......................................... R9
3009502 ..... M41395 ........................................ R11
3009503 ..... M41405 ........................................ R11
3009511 ..... M41525 ........................................ R16
3019444 ..... M40521 ........................................ R16
3020185 ..... SDMT1204PDRML TN6540 ......J45, K6
3021212 ..... MS1242CG .........................M23, M31,
M36
3022866 ..... MS1294 W ...........................M55, M62
3024915 ..... 7F2-1141A ................................... U31
3025376 ..... M1200D063Z07HN09 ............H31–32
3025377 ..... M1200D080Z09HN09 ............H31–32
3025378 ..... M1200D100Z11HN09 ............H31–32
3026450 ..... 12MHC030M ...............................T117
3026451 ..... 12MHC040M ...............................T117
3026452 ..... 12MHC050M ...............................T117
3026643 ..... 12MHC060M ...............................T117
3026644 ..... 12MHC070M ...............................T117
3026645 ..... 12MHC080M ...............................T117
3026646 ..... 12MHC090M ...............................T117
3026647 ..... 12MHC100M ...............................T117
3026648 ..... 20MHC030M ...............................T117
3026649 ..... 20MHC040M ...............................T117
3026650 ..... 20MHC050M ...............................T117
3026651 ..... 20MHC060M ...............................T117
3026652 ..... 20MHC070M ...............................T117
3026653 ..... 20MHC080M ...............................T117
3026654 ..... 20MHC090M ...............................T117
3026655 ..... 20MHC100M ...............................T117
3026656 ..... 20MHC110M ...............................T117
3026657 ..... 20MHC120M ...............................T117
3026658 ..... 20MHC130M ...............................T117
3026659 ..... 20MHC140M ...............................T117
3026660 ..... 20MHC150M ...............................T117
3026661 ..... 20MHC160M ...............................T117
3026662 ..... 25MHC030M ...............................T117
3026663 ..... 25MHC040M ...............................T117
3026664 ..... 25MHC050M ...............................T117
3026665 ..... 25MHC060M ...............................T117
3026666 ..... 25MHC070M ...............................T117
3026667 ..... 25MHC080M ...............................T117
3026668 ..... 25MHC090M ...............................T117
3026669 ..... 25MHC100M ...............................T117
3026670 ..... 25MHC120M ...............................T117
3026671 ..... 25MHC140M ...............................T117
3026672 ..... 25MHC160M ...............................T117
3026675 ..... 32MHC060M ...............................T117
3026676 ..... 32MHC070M ...............................T117
3026677 ..... 32MHC080M ...............................T117
3026678 ..... 32MHC090M ...............................T117
3026679 ..... 32MHC100M ...............................T117
3026680 ..... 32MHC110M ...............................T117
3026681 ..... 32MHC120M ...............................T117
3026682 ..... 32MHC130M ...............................T117
3026683 ..... 32MHC140M ...............................T117
3026684 ..... 32MHC150M ...............................T117
3026685 ..... 32MHC160M ...............................T117
3027222 ..... 7F4-2559A ................................... U35
3027643 ..... MB156500L CG5 .......................... D80
3029009 ..... S40TCCLNR12MX7 WG ................. C62
3029010 ..... S40TCCLNL12MX7 WG ................. C62
3029011 ..... S40TCCLNR12MN4 WG ................ C62
3029012 ..... S40TCCLNL12MN4 WG ................. C62
3029143 ..... S40TCCLNR12MN7 WG ................ C62
3029144 ..... S40TCCLNL12MN7 WG ................. C62
3029151 ..... S40TCSSNR12MX7 WG................. C63
3029152 ..... S40TCSSNL12MX7 WG ................. C63
3029153 ..... S40TCWLNR08MX7 WG ................ C64
3029154 ..... S40TCWLNL08MX7 WG ................ C64
3030017 ..... HNGJ0905ANENLD TN7535 ......... H33,
H39
3030034 ..... HNGJ0905ANENLD TN6540 ......... H33,
H39
3032539 ..... 7F2-1266A ................................... U31
3032544 ..... CDJNL2525M15MN7 WG ............. C33
3032545 ..... CDJNR3225P15MN7 WG .............. C33
3032546 ..... CDJNL3225P15MN7 WG .............. C33
3032549 ..... CRDNN2525M12MN4 WG............. C35
3032550 ..... CRDNN3225P12MN4 WG ............. C35
3032551 ..... CRDNN2525M12MN7 WG............. C35
3032552 ..... CRDNN3225P12MN7 WG ............. C35
3032675 ..... CRSNR3225P12MN4 WG .............. C35
3032676 ..... CRSNL3225P12MN4 WG .............. C35
3032677 ..... CRSNR2525M12MN7 WG ............. C35
3032678 ..... CRSNL2525M12MN7 WG ............. C35
3032679 ..... CRSNR3225P12MN7 WG .............. C35
3032680 ..... CRSNL3225P12MN7 WG .............. C35
3032691 ..... CCLNR2525M12MX7 WG ............. C31
3032692 ..... CCLNL2525M12MX7 WG .............. C31
3032713 ..... CCLNR3225P12MX7 WG .............. C31
3032715 ..... CCLNR2525M12MN4 WG ............. C31
3032716 ..... CCLNL2525M12MN4 WG ............. C31
3032717 ..... CCLNR2525M12MN7 WG ............. C31
3032719 ..... CCLNR3225P12MN7 WG .............. C31
3032723 ..... CCLNR2525M12MF7 WG .............. C32
3032726 ..... CDJNR2525M15MX7 WG ............. C32
3032727 ..... CDJNL2525M15MX7 WG .............. C32
3032728 ..... CDJNR2525M15MN7 WG ............. C33
3037596 ..... HNGJ0905ANSNGD TN6540 ........ H28,
H34, H40
3044700 ..... 7S2SM .......................................... U40
3048459 ..... 022804-000020 K30F ............O88–89
3048461 ..... 022804-000025 K30F ............O88–89
3048480 ..... 022806-000020 K30F .................. O88
3048483 ..... 022806-000025 K30F .................. O88
3048485 ..... 322804-000020 K30F-TICN ......... O88
3048486 ..... 322804-000025 K30F-TICN ......... O88
3048488 ..... 322806-000020 K30F-TICN ......... O88
3048489 ..... 322806-000025 K30F-TICN ......... O88
3048490 ..... 422804-000020 K30F-DCF .......... O89
3048491 ..... 422804-000025 K30F-DCF .......... O89
3048492 ..... 422806-000020 K30F-DCF .......... O89
3048503 ..... 422806-000025 K30F-DCF .......... O89
3048961 ..... 422875-010015 K10UF-DCHP ... O173
3053979 ..... 7F0-0625A ................................... U29
3055655 ..... 050280-001400 K10F ................. W15
3055656 ..... 050280-001600 K10F ................. W15
3055657 ..... 050280-001800 K10F ................. W15
3056095 ..... 050280-002000 K10F ................. W15
3056096 ..... 050280-002200 K10F ................. W15
3056097 ..... 050280-002400 K10F ................. W15
3056098 ..... 050280-002500 K10F ................. W15
3056099 ..... 050280-002600 K10F ................. W15
3056100 ..... 050280-002800 K10F ................. W15
3056102 ..... 050280-003000 K10F ................. W15
3056273 ..... 050280-003200 K10F ................. W15
3066118 ..... M1200D160Z12HN09 .................. H31
3066119 ..... M1200D160Z16HN09 ............H31–32
3066479 ..... XNGJ0905ANSNGD3W TN6540 .... H35
3077292 ..... 450280-002000 K10F-DCFD ....... W15
3077681 ..... 6N7018006LT ................................. Q6
3078687 ..... 6N7014005LT ................................. Q6
3078692 ..... 6N7032009LT ................................. Q6
3081507 ..... M1200D080Z06HN09 .................. H31
3081508 ..... M1200D125Z10HN09 .................. H31
3083635 ..... 7F0-0689A ................................... U29
3084312 ..... 450281-001400 K10F-DCFD ....... W11
3084317 ..... 450281-001600 K10F-DCFD ....... W11
3084319 ..... 450281-002000 K10F-DCFD ....... W11
3084320 ..... 450281-003000 K10F-DCFD ....... W11
3084321 ..... 450281-001800 K10F-DCFD ....... W11
3084322 ..... 450281-002200 K10F-DCFD ....... W11
3084323 ..... 450281-002400 K10F-DCFD ....... W11
3084324 ..... 450281-002500 K10F-DCFD ....... W11
3084325 ..... 450281-002600 K10F-DCFD ....... W11
3084327 ..... 450281-002800 K10F-DCFD ....... W11
3084328 ..... 450281-003200 K10F-DCFD ....... W11
3084512 ..... 450280-001400 K10F-DCFD ....... W15
3084526 ..... 450280-001600 K10F-DCFD ....... W15
3084528 ..... 450280-001800 K10F-DCFD ....... W15
3084529 ..... 450280-002200 K10F-DCFD ....... W15
3084530 ..... 450280-002400 K10F-DCFD ....... W15
3084531 ..... 450280-002500 K10F-DCFD ....... W15
3084532 ..... 450280-002600 K10F-DCFD ....... W15
3084593 ..... 450280-002800 K10F-DCFD ....... W15
3084594 ..... 450280-003000 K10F-DCFD ....... W15
3084595 ..... 450280-003200 K10F-DCFD ....... W15
3084978 ..... 050281-001400 K10F ................. W11
3084983 ..... 050281-001600 K10F ................. W11
3084992 ..... 050281-001800 K10F ................. W11
3085083 ..... 050281-002000 K10F ................. W11
3085084 ..... 050281-002200 K10F ................. W11
3085087 ..... 050281-002400 K10F ................. W11
3085089 ..... 050281-002500 K10F ................. W11
3085090 ..... 050281-002600 K10F ................. W11
3085092 ..... 050281-002800 K10F ................. W11
3085104 ..... 050281-003000 K10F ................. W11
3088200 ..... 7F2-1016A ................................... U31
3088746 ..... 7F2-1156A ................................... U31
3089237 ..... 7N0100502MJ ALTIN-MJ1 .......... O165
3089238 ..... 7N0100602MJ ALTIN-MJ1 .......... O165
3089239 ..... 7N0101202MJ ALTIN-MJ1 .......... O165
3089240 ..... 7N0101402MJ ALTIN-MJ1 .......... O165
3089241 ..... 7N0101602MJ ALTIN-MJ1 .......... O165
3089242 ..... 7N0101802MJ ALTIN-MJ1 .......... O165
3089243 ..... 7N0104002MJ ALTIN-MJ1 .......... O165
3089244 ..... 7N0200402MJ ALTIN-MJ1 .......... O160
3089245 ..... 7N0201002MJ ALTIN-MJ1 .......... O161
3089246 ..... 7N0201402MJ ALTIN-MJ1 .......... O161
3089247 ..... 7N0202002MJ ALTIN-MJ1 .......... O162
3089248 ..... 7N1200502MJ ALTIN-MJ1 .......... O160
3089249 ..... 7N1200602MJ ALTIN-MJ1 .......... O160
3089250 ..... 7N1200802MJ ALTIN-MJ1 .......... O160
3089251 ..... 7N1201002MJ ALTIN-MJ1 .......... O161
Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 19 11/2/15 10:33 AM
LViWID M 16 I d Z002 Z145 M i REBRAND O b 28 2015 3 09 PM
Z20 widia.com
Index by Order Number
Order No. Catalogue No. Page(s)
3089252 ..... 7N1201202MJ ALTIN-MJ1 .......... O161
3089253 ..... 7N1201502MJ ALTIN-MJ1 .......... O161
3089254 ..... 7N1201802MJ ALTIN-MJ1 .......... O162
3089255 ..... 7N1202002MJ ALTIN-MJ1 .......... O162
3089256 ..... 7N1202502MJ ALTIN-MJ1 .......... O163
3091240 ..... 7N0106002MJ ALTIN-MJ1 .......... O165
3093559 ..... HNGJ0905ANENLD TN6520 ......... H33,
H39
3093593 ..... M1200D125Z14HN09 ............H31–32
3093594 ..... M1200D063Z06HN09 .................. H31
3093721 ..... HNGJ0905ANSNGD TN7535 ........ H28,
H34, H40
3094667 ..... SDMT1204PDRML TN6520 ......J45, K6
3094669 ..... SDMT1204PDRMH TN6520 .....J46, K7
3096207 ..... 7F2-1063A ................................... U31
3096208 ..... 7F2-1024A ................................... U31
3099442 ..... 7F1-0922A ................................... U30
3101466 ..... 70N610004MT ALTIN-MT1 .........O152
3101467 ..... 70N612005MT ALTIN-MT1 .........O152
3104431 ..... 7F6-3188N ................................... U37
3107859 ..... 510206002.. UNCOATED ............ O126
3107860 ..... 510204001.. UNCOATED ............ O126
3114699 ..... 7F1-0750A ................................... U30
3117962 ..... XNGJ0905ANSNGD3W TN6510 .... H35
3118234 ..... 2EL05ISO TN6025 .........................F49
3118236 ..... 2EL06ISO TN6025 .........................F49
3118238 ..... 2EL075ISO TN6025 .......................F49
3118240 ..... 2EL07ISO TN6025 .........................F49
3118242 ..... 2EL08ISO TN6025 .........................F49
3118374 ..... 2EL10ISO TN6025 .........................F49
3118376 ..... 2EL125ISO TN6025 .......................F49
3118378 ..... 2EL15ISO TN6025 .........................F49
3118380 ..... 2EL175ISO TN6025 .......................F49
3118382 ..... 2IL035ISO TN6025.........................F52
3118384 ..... 2IL04ISO TN6025 ...........................F52
3118386 ..... 2IL05ISO TN6025 ...........................F52
3118387 ..... 2IL06ISO TN6025 ...........................F52
3118389 ..... 2IL075ISO TN6025.........................F52
3118390 ..... 2IL07ISO TN6025 ...........................F52
3118392 ..... 2IL08ISO TN6025 ...........................F52
3119541 ..... HNGJ0905ANSNGD TN6520 ........ H28,
H34, H40
3121225 ..... 193.492................................. M28–31
3122015 ..... 3EL035ISO TN6025 .......................F49
3122017 ..... 3EL045ISO TN6025 .......................F49
3122018 ..... 3EL04ISO TN6025 .........................F49
3122021 ..... 3EL06ISO TN6025 .........................F50
3122028 ..... 3EL10UN TN6025 ..........................F55
3122032 ..... 3EL11UN TN6025 ..........................F55
3122039 ..... 3EL13UN TN6025 ..........................F55
3122414 ..... 3IL56UN TN6025 ...........................F57
3122416 ..... 3IL64UN TN6025 ...........................F57
3122422 ..... 3IL8RD TN6025 .............................F66
3122444 ..... 3IL8UN TN6025 .............................F57
3122446 ..... 3IL9UN TN6025 .............................F57
3122449 ..... 3ILA55 TN6025 ..............................F61
3123198 ..... 2IL125ISO TN6025.........................F52
3124269 ..... 3IL035ISO TN6025.........................F53
3124271 ..... 3IL04ISO TN6025 ...........................F53
3124272 ..... 3IL05ISO TN6025 ...........................F53
3124274 ..... 3IL06ISO TN6025 ...........................F53
3124276 ..... 3IL07ISO TN6025 ...........................F53
3126691 ..... M4000CA-HN09 ........................... H73
3133084 ..... 490607003RT TIALN-RT ............... O66
3133085 ..... 490609004RT TIALN-RT ............... O66
3133086 ..... 490611005RT TIALN-RT ............... O66
3133087 ..... 490613014RT TIALN-RT ............... O66
3133459 ..... MS1294CG ......................J8, J24, J35,
M6, M23, M31,
M55, M62
3134515 ..... MS1254CG ..........................M62, M67
3139827 ..... M41516 ........................................ R16
3176688 ..... MS2173 ......... C110, C113, C115–116
3176689 ..... MS2175 .......... C110–111, C113–117,
C119, C126–129
3279094 ..... 56-2020 ...................U40–41, U44–45
3279755 ..... 7F7-3543T ................................... U37
3279914 ..... 7S0.5TE ........................................ U45
3279918 ..... 7S1.5SE ........................................ U41
3279923 ..... 7S2.5TM-4MT .............................. U44
3279924 ..... 7S2.5TS ........................................ U44
3287987 ..... CSWM 035 040 ............... C110, C113,
C115–116
3287988 ..... CSWM 040 050 ................. C110–111,
C113–117, C119,
C126–129
3287989 ..... CSWM 060 050 .....C92–94, C97–110,
C112–113,
C118–129
3287990 ..... CSWM 080 050 ................... C92–105,
C108–109, C112,
C120, C124
3287991 ..... CSWM 100 080 ................... C94, C97,
C101–102
3321510 ..... 7N0100302MJ ALTIN-MJ1 .......... O165
3321511 ..... 7N0100402MJ ALTIN-MJ1 .......... O165
3321512 ..... 7N0100802MJ ALTIN-MJ1 .......... O165
3321513 ..... 7N0101002MJ ALTIN-MJ1 .......... O165
3321514 ..... 7N0101502MJ ALTIN-MJ1 .......... O165
3321515 ..... 7N0102002MJ ALTIN-MJ1 .......... O165
3321516 ..... 7N0102502MJ ALTIN-MJ1 .......... O165
3321517 ..... 7N0103002MJ ALTIN-MJ1 .......... O165
3321518 ..... 7N0200302MJ ALTIN-MJ1 .......... O160
3321519 ..... 7N0200502MJ ALTIN-MJ1 .......... O160
3321520 ..... 7N0200602MJ ALTIN-MJ1 .......... O160
3321521 ..... 7N0200802MJ ALTIN-MJ1 .......... O160
3321522 ..... 7N0201202MJ ALTIN-MJ1 .......... O161
3321523 ..... 7N0201502MJ ALTIN-MJ1 .......... O161
3321524 ..... 7N0201602MJ ALTIN-MJ1 .......... O162
3321525 ..... 7N0201802MJ ALTIN-MJ1 .......... O162
3321526 ..... 7N0202502MJ ALTIN-MJ1 .......... O163
3321527 ..... 7N1201402MJ ALTIN-MJ1 .......... O161
3321528 ..... 7N1201602MJ ALTIN-MJ1 .......... O162
3321529 ..... 7N2200400MJ ALTIN-MJ1 .......... O160
3321530 ..... 7N2200410MJ ALTIN-MJ1 .......... O160
3321531 ..... 7N2200500MJ ALTIN-MJ1 .......... O160
3321532 ..... 7N2200510MJ ALTIN-MJ1 .......... O160
3321533 ..... 7N2200520MJ ALTIN-MJ1 .......... O160
3321534 ..... 7N2200600MJ ALTIN-MJ1 .......... O160
3321535 ..... 7N2200610MJ ALTIN-MJ1 .......... O160
3321536 ..... 7N2200620MJ ALTIN-MJ1 .......... O160
3321537 ..... 7N2200701MJ ALTIN-MJ1 .......... O160
3321538 ..... 7N2200711MJ ALTIN-MJ1 .......... O160
3321539 ..... 7N2200721MJ ALTIN-MJ1 .......... O160
3321540 ..... 7N2200801MJ ALTIN-MJ1 .......... O160
3321541 ..... 7N2200811MJ ALTIN-MJ1 .......... O160
3321542 ..... 7N2200821MJ ALTIN-MJ1 .......... O160
3321543 ..... 7N2200901MJ ALTIN-MJ1 .......... O160
3321544 ..... 7N2200911MJ ALTIN-MJ1 .......... O161
3321545 ..... 7N2200921MJ ALTIN-MJ1 .......... O161
3321546 ..... 7N2201001MJ ALTIN-MJ1 .......... O161
3321547 ..... 7N2201011MJ ALTIN-MJ1 .......... O161
3321548 ..... 7N2201021MJ ALTIN-MJ1 .......... O161
3321549 ..... 7N2201031MJ ALTIN-MJ1 .......... O161
3321550 ..... 7N2201201MJ ALTIN-MJ1 .......... O161
3321551 ..... 7N2201211MJ ALTIN-MJ1 .......... O161
3321552 ..... 7N2201221MJ ALTIN-MJ1 .......... O161
3321553 ..... 7N2201231MJ ALTIN-MJ1 .......... O161
3321554 ..... 7N2201401MJ ALTIN-MJ1 .......... O161
3321555 ..... 7N2201411MJ ALTIN-MJ1 .......... O161
3321556 ..... 7N2201421MJ ALTIN-MJ1 .......... O161
3321557 ..... 7N2201431MJ ALTIN-MJ1 .......... O161
3321558 ..... 7N2201441MJ ALTIN-MJ1 .......... O161
3321559 ..... 7N2201501MJ ALTIN-MJ1 .......... O161
3321560 ..... 7N2201511MJ ALTIN-MJ1 .......... O161
3321561 ..... 7N2201521MJ ALTIN-MJ1 .......... O161
3321562 ..... 7N2201531MJ ALTIN-MJ1 .......... O161
3321563 ..... 7N2201541MJ ALTIN-MJ1 .......... O161
3321564 ..... 7N2201551MJ ALTIN-MJ1 .......... O161
3321565 ..... 7N2201601MJ ALTIN-MJ1 .......... O162
3321566 ..... 7N2201611MJ ALTIN-MJ1 .......... O161
3321567 ..... 7N2201621MJ ALTIN-MJ1 .......... O161
3321568 ..... 7N2201631MJ ALTIN-MJ1 .......... O161
3321569 ..... 7N2201641MJ ALTIN-MJ1 .......... O161
3321570 ..... 7N2201701MJ ALTIN-MJ1 .......... O162
3321571 ..... 7N2201711MJ ALTIN-MJ1 .......... O162
3321572 ..... 7N2201721MJ ALTIN-MJ1 .......... O162
3321573 ..... 7N2201731MJ ALTIN-MJ1 .......... O162
3321574 ..... 7N2201741MJ ALTIN-MJ1 .......... O162
3321575 ..... 7N2201801MJ ALTIN-MJ1 .......... O162
3321576 ..... 7N2201811MJ ALTIN-MJ1 .......... O162
3321577 ..... 7N2201821MJ ALTIN-MJ1 .......... O162
3321578 ..... 7N2201831MJ ALTIN-MJ1 .......... O162
3321579 ..... 7N2201841MJ ALTIN-MJ1 .......... O162
3321580 ..... 7N2201901MJ ALTIN-MJ1 .......... O162
3321581 ..... 7N2201911MJ ALTIN-MJ1 .......... O162
3321582 ..... 7N2201921MJ ALTIN-MJ1 .......... O162
3321583 ..... 7N2201931MJ ALTIN-MJ1 .......... O162
3321584 ..... 7N2201941MJ ALTIN-MJ1 .......... O162
3321585 ..... 7N2202001MJ ALTIN-MJ1 .......... O162
3321586 ..... 7N2202011MJ ALTIN-MJ1 .......... O162
3321587 ..... 7N2202021MJ ALTIN-MJ1 .......... O162
3321588 ..... 7N2202031MJ ALTIN-MJ1 .......... O162
3321589 ..... 7N2202041MJ ALTIN-MJ1 .......... O162
3321590 ..... 7N2202501MJ ALTIN-MJ1 .......... O162
3321591 ..... 7N2202511MJ ALTIN-MJ1 .......... O163
3321592 ..... 7N2202521MJ ALTIN-MJ1 .......... O163
3321593 ..... 7N2202531MJ ALTIN-MJ1 .......... O163
3321594 ..... 7N2202541MJ ALTIN-MJ1 .......... O163
3321595 ..... 7N2203002MJ ALTIN-MJ1 .......... O163
3321596 ..... 7N2203012MJ ALTIN-MJ1 .......... O163
3321597 ..... 7N2203022MJ ALTIN-MJ1 .......... O163
3321598 ..... 7N2203032MJ ALTIN-MJ1 .......... O163
3321599 ..... 7N2203042MJ ALTIN-MJ1 .......... O163
3324657 ..... M40353 .......................................... R9
3324689 ..... M41275 .......................................... R7
3324690 ..... M41277 .......................................... R7
3324697 ..... M41374 ........................................ R10
3324707 ..... M41442 ........................................ R12
3325040 ..... SDMT1204PDRMH TN6525 .....J46, K7
3325310 ..... M1200D040Z03B25HN09 ............ H30
3325311 ..... M1200D040Z04B25HN09 ............ H30
3325312 ..... M1200D050Z04HN09 .................. H31
3325693 ..... M1200D050Z05HN09 ............H31–32
3325694 ..... M1200D100Z08HN09 .................. H31
3326330 ..... SDMT1204PDRMH TN6540 .....J46, K7
3330950 ..... HNGJ0905ANENLD TN6525 ......... H33,
H39
3339713 ..... 7F1-0960T ................................... U30
3341346 ..... 70N606002MT ALTIN-MT1 .........O152
3341348 ..... 70N608003MT ALTIN-MT1 .........O152
3350935 ..... 510316006.. UNCOATED ............ O127
3353278 ..... RDMW0802M0T TN6540 ..............M76
3353279 ..... RDMW1003M0T TN6540 ..............M81
3353281 ..... RDMW1204M0TX TN6540 ............M87
3353311 ..... CKC5 ...................................... F71–72
3374385 ..... M270TF10R05 TN2510 ............. M122
3374387 ..... M270TF12R05 TN2510 ............. M122
3374388 ..... M270TF12R1 TN2510 ............... M122
3374389 ..... M270TF16R03 TN2510 ............. M122
3374390 ..... M270TF16R05 TN2510 ............. M122
3374391 ..... M270TF16R1 TN2510 ............... M122
3374392 ..... M270TF16R2 TN2510 ............... M122
3375713 ..... M270TF20R03 TN2510 ............. M122
3375714 ..... M270TF20R05 TN2510 ............. M122
3375716 ..... M270TF20R2 TN2510 ............... M122
3378676 ..... SDMT1506PDRMH TN6540 ...........J50
3378677 ..... SDMT1506PDRML TN6540 ............J49
3380486 ..... 12146111000 ..................... H15, H20,
H26, H32, H38
3380487 ..... 12146111100 ...... H26, H32, H38, J24
3382203 ..... 12146034500 .....H5–7, H12–15, H20,
H26, H30, H32, H38
3382204 ..... 12146101000 .............................. H26
3382205 ..... 12146101800 .............................. H26
3382206 ..... 12146107000 .............H15, H20, H26,
H32, H38, J24
3384424 ..... M270TF10R05 TN2525 ............. M122
3384426 ..... M270TF12R05 TN2525 ............. M122
3384427 ..... M270TF12R1 TN2525 ............... M122
3384428 ..... M270TF16R03 TN2525 ............. M122
3384429 ..... M270TF16R05 TN2525 ............. M122
3384430 ..... M270TF16R1 TN2525 ............... M122
3384431 ..... M270TF16R2 TN2525 ............... M122
3384453 ..... M270TF20R05 TN2525 ............. M122
3384454 ..... M270TF20R1 TN2525 ............... M122
3384455 ..... M270TF20R2 TN2525 ............... M122
3393828 ..... QSBMW121523R WG ................... D24
3396984 ..... MS2085 ................................. M11–12
3397551 ..... 12146109400 .............H15, H20, H26,
H32, H38
3403492 ..... 70N712005MT ALTIN-MT1 .........O153
3450355 ..... MS1234CG ......J8, J24, J35, M6, M12,
M23, M85, M91, M96
3450356 ..... MS2189C ......................................J35
3454427 ..... 7N2201561RJ TIALN-RJ1 ........... O161
3454428 ..... 7N2201571RJ TIALN-RJ1 ........... O161
3454429 ..... 7N2202051RJ TIALN-RJ1 ........... O162
3454430 ..... 7N2202061RJ TIALN-RJ1 ........... O162
3454431 ..... 7N2202071RJ TIALN-RJ1 ........... O162
3454432 ..... 7N2202091RJ TIALN-RJ1 ........... O162
3454433 ..... 7N2203052RJ TIALN-RJ1 ........... O163
3454434 ..... 7N2203062RJ TIALN-RJ1 ........... O163
3462450 ..... 47N704002LT TIALN-LT .................. O9
3462451 ..... 47N704012LT TIALN-LT .................. O9
3462452 ..... 47N704012MT ALTIN-MT ............... O9
3462453 ..... 47N704022LT TIALN-LT .................. O9
3462454 ..... 47N705002LT TIALN-LT .................. O9
3462455 ..... 47N705012LT TIALN-LT .................. O9
3462456 ..... 47N705012MT ALTIN-MT ............... O9
3462457 ..... 47N706002LT TIALN-LT .................. O9
3462458 ..... 47N706002MT ALTIN-MT ............... O9
3462459 ..... 47N706012LT TIALN-LT .................. O9
3462460 ..... 47N706012MT ALTIN-MT ............... O9
Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 20 11/2/15 10:33 AM
LViWID M 16 I d Z002 Z145 M i REBRANDO b 28 20153 09PM
Z21
widia.com
Index by Order Number
Order No. Catalogue No. Page(s)
3462461 ..... 47N706022LT TIALN-LT .................. O9
3462462 ..... 47N708003LT TIALN-LT .................. O9
3462463 ..... 47N708003MT ALTIN-MT ............... O9
3462464 ..... 47N708013LT TIALN-LT .................. O9
3462465 ..... 47N708013MT ALTIN-MT ............... O9
3462466 ..... 47N708023LT TIALN-LT .................. O9
3462467 ..... 47N708033LT TIALN-LT .................. O9
3462468 ..... 47N710004LT TIALN-LT .................. O9
3462469 ..... 47N710004MT ALTIN-MT ............... O9
3462470 ..... 47N710014LT TIALN-LT .................. O9
3462471 ..... 47N710014MT ALTIN-MT ............... O9
3462472 ..... 47N710024LT TIALN-LT .................. O9
3462473 ..... 47N710034LT TIALN-LT .................. O9
3462474 ..... 47N710034MT ALTIN-MT ............... O9
3462475 ..... 47N712005LT TIALN-LT .................. O9
3462476 ..... 47N712005MT ALTIN-MT ............... O9
3462477 ..... 47N712015LT TIALN-LT .................. O9
3462478 ..... 47N712015MT ALTIN-MT ............... O9
3462479 ..... 47N712025LT TIALN-LT .................. O9
3462480 ..... 47N712035LT TIALN-LT .................. O9
3462481 ..... 47N712035MT ALTIN-MT ............... O9
3462482 ..... 47N712045LT TIALN-LT ................ O10
3462483 ..... 47N712045MT ALTIN-MT ............. O10
3462484 ..... 47N716006LT TIALN-LT ................ O10
3462485 ..... 47N716006MT ALTIN-MT ............. O10
3462486 ..... 47N716016LT TIALN-LT ................ O10
3462487 ..... 47N716016MT ALTIN-MT ............. O10
3462488 ..... 47N716026LT TIALN-LT ................ O10
3462489 ..... 47N716026MT ALTIN-MT ............. O10
3462490 ..... 47N720007LT TIALN-LT ................ O10
3462491 ..... 47N720007MT ALTIN-MT ............. O10
3462492 ..... 47N720017LT TIALN-LT ................ O10
3462493 ..... 47N720017MT ALTIN-MT ............. O10
3462494 ..... 47N720027LT TIALN-LT ................ O10
3462495 ..... 47N720027MT ALTIN-MT ............. O10
3474583 ..... 49N604002MW ALTIN-MW ........... O61
3474584 ..... 49N605002MW ALTIN-MW ........... O61
3474585 ..... 49N606002MW ALTIN-MW ........... O61
3474587 ..... 49N608003MW ALTIN-MW ........... O61
3474589 ..... 49N610004MW ALTIN-MW ........... O61
3474591 ..... 49N612005MW ALTIN-MW ........... O61
3474593 ..... 49N614014MW ALTIN-MW ........... O61
3474594 ..... 49N616006MW ALTIN-MW ........... O61
3474595 ..... 49N618018MW ALTIN-MW ........... O61
3474596 ..... 49N620007MW ALTIN-MW ........... O61
3474597 ..... 49N625008MW ALTIN-MW ........... O61
3477329 ..... 70N716006MT ALTIN-MT1 .........O153
3484680 ..... 510201500.. UNCOATED ............ O126
3484681 ..... 510202000.. UNCOATED ............ O126
3484682 ..... 510202500.. UNCOATED ............ O126
3484683 ..... 510203000.. UNCOATED ............ O126
3484684 ..... 510205001.. UNCOATED ............ O126
3484685 ..... 510205002.. UNCOATED ............ O126
3484686 ..... 510208003.. UNCOATED ............ O126
3484687 ..... 510210004.. UNCOATED ............ O126
3484688 ..... 510212005.. UNCOATED ............ O126
3484689 ..... 510214014.. UNCOATED ............ O126
3484690 ..... 510216006.. UNCOATED ............ O126
3484691 ..... 510218018.. UNCOATED ............ O126
3484692 ..... 510220007.. UNCOATED ............ O126
3484693 ..... 510303000.. UNCOATED ............ O127
3484694 ..... 510304001.. UNCOATED ............ O127
3484695 ..... 510305001.. UNCOATED ............ O127
3484696 ..... 510306002.. UNCOATED ............ O127
3484697 ..... 510308003.. UNCOATED ............ O127
3484698 ..... 510310004.. UNCOATED ............ O127
3484699 ..... 510312005.. UNCOATED ............ O127
3484700 ..... 510314014.. UNCOATED ............ O127
3484701 ..... 510318018.. UNCOATED ............ O127
3484702 ..... 510320007.. UNCOATED ............ O127
3484703 ..... 51N306002.. UNCOATED ............ O128
3484704 ..... 51N306012.. UNCOATED ............ O128
3484705 ..... 51N306022.. UNCOATED ............ O128
3484706 ..... 51N308003.. UNCOATED ............ O128
3484707 ..... 51N308013.. UNCOATED ............ O128
3484708 ..... 51N308023.. UNCOATED ............ O128
3484709 ..... 51N310004.. UNCOATED ............ O128
3484710 ..... 51N310014.. UNCOATED ............ O128
3484711 ..... 51N310024.. UNCOATED ............ O128
3484712 ..... 51N312005.. UNCOATED ............ O128
3484713 ..... 51N312015.. UNCOATED ............ O128
3484714 ..... 51N312025.. UNCOATED ............ O128
3484715 ..... 51N316006.. UNCOATED ............ O128
3484716 ..... 51N316016.. UNCOATED ............ O128
3484717 ..... 51N316026.. UNCOATED ............ O128
3484718 ..... 51N316036.. UNCOATED ............ O128
3484719 ..... 51N320007.. UNCOATED ............ O128
3484720 ..... 51N320017.. UNCOATED ............ O128
3484721 ..... 51N320027.. UNCOATED ............ O128
3484722 ..... 51N320037.. UNCOATED ............ O128
3484748 ..... 70N616006MT ALTIN-MT1 .........O152
3484749 ..... 70N620007MT ALTIN-MT1 .........O152
3484756 ..... 70N706002MT ALTIN-MT1 .........O153
3484757 ..... 70N708003MT ALTIN-MT1 .........O153
3484758 ..... 70N710004MT ALTIN-MT1 .........O153
3484759 ..... 70N720007MT ALTIN-MT1 .........O153
3503901 ..... MS2187C ........................J8, J24, J35,
M12, M36
3503902 ..... MS2195C ...................... J8, J24, M12,
M31, M36
3517652 ..... CSBM8765L WG ........................... D10
3518694 ..... GSPM1316515R WG ..................... D26
3523083 ..... RDMW1605M0TX TN6540 ............M93
3523620 ..... XNGJ0905ANSNGD3W TN6525 .... H35
3524707 ..... XNGJ0905ANSNGD3W TN6520 .... H35
3526093 ..... M41400 ........................................ R11
3538705 ..... 206264........................................E122
3538706 ..... 206265........................................E122
3538707 ..... 206266........................................E122
3538710 ..... 206271........................................E125
3538711 ..... 206272........................................E122
3538712 ..... 206273........................................E122
3538713 ..... 206274........................................E122
3538714 ..... 206275........................................E122
3538715 ..... 206276........................................E122
3538716 ..... 206277........................................E122
3538717 ..... 206278........................................E122
3538718 ..... 206279........................................E122
3538719 ..... 206280........................................E122
3538720 ..... 206281........................................E122
3538721 ..... 206282........................................E122
3538722 ..... 206283........................................E122
3538723 ..... 206284........................................E122
3538739 ..... 206411........................................E127
3538741 ..... 206417........................................E123
3538742 ..... 206418........................................E123
3538743 ..... 206419........................................E123
3538751 ..... 206446........................................E122
3538752 ..... 206447........................................E122
3538753 ..... 206450........................................E122
3538754 ..... 206452........................................E122
3538755 ..... 206454........................................E122
3538756 ..... 206455........................................E122
3538766 ..... 206506........................................E128
3538767 ..... 206507........................................E128
3538769 ..... 206509........................................E128
3538772 ..... 206518............................... E124–125
3538773 ..... 206519............................... E124–125
3538774 ..... 206523............................... E124–125
3539170 ..... WMTCR1212H2B16 .......................E32
3539171 ..... WMTCL1212H2B16 .......................E32
3539172 ..... WMTSR1616K2B19 .......................E30
3539173 ..... WMTSL1616K2B19 .......................E31
3539174 ..... WMTSR2020K2B19 .......................E30
3539175 ..... WMTSL2020K2B19 .......................E31
3539221 ..... WMTCR2525M2B19 ......................E30
3539428 ..... 309105........................................E127
3539432 ..... 309111........................................E127
3539439 ..... 310102........................................E126
3539440 ..... 310108........................................E126
3539441 ..... 310109........................................E126
3539504 ..... 331101........................................E125
3539505 ..... 331102........................................E125
3539508 ..... 331109........................................E125
3539509 ..... 331110........................................E125
3539510 ..... 331118........................................E125
3539515 ..... 333101........................................E124
3539516 ..... 333102........................................E124
3539517 ..... 333103........................................E124
3539518 ..... 333104........................................E124
3539522 ..... 333111........................................E124
3539795 ..... 409182........................................E128
3539796 ..... 409183........................................E128
3539798 ..... 409185........................................E128
3539825 ..... 435101..............................E107, E126
3539826 ..... 435102........................................E126
3539827 ..... 435103........................................E127
3539828 ..... 435104........................................E126
3539829 ..... 435105........................................E126
3539830 ..... 435106........................................E127
3539833 ..... 435109........................................E126
3539834 ..... 435110........................................E126
3539837 ..... 435116........................................E126
3539838 ..... 435117........................................E126
3539841 ..... 435126........................................E122
3539842 ..... 435127........................................E122
3539843 ..... 435128........................................E125
3539844 ..... 435129........................................E125
3539845 ..... 435130........................................E122
3539846 ..... 435131........................................E122
3539849 ..... 435136........................................E127
3539850 ..... 435137........................................E127
3539851 ..... 435140........................................E122
3539852 ..... 435141........................................E122
3539853 ..... 435142........................................E125
3539854 ..... 435143........................................E125
3539859 ..... 435148........................................E126
3539860 ..... 435149........................................E126
3539861 ..... 435150........................................E126
3539862 ..... 435151........................................E126
3539863 ..... 435152........................................E122
3539864 ..... 435153........................................E122
3539865 ..... 435154........................................E124
3539866 ..... 435155........................................E124
3539867 ..... 435156........................................E124
3539868 ..... 435157........................................E124
3539876 ..... 435170........................................E122
3539877 ..... 435171........................................E122
3539880 ..... 435180........................................E123
3539881 ..... 435181........................................E123
3539884 ..... 435194........................................E124
3539887 ..... 435200........................................E122
3539888 ..... 435201........................................E122
3539889 ..... 435202........................................E122
3539890 ..... 435203........................................E122
3539891 ..... 435204........................................E122
3539892 ..... 435205........................................E122
3539955 ..... 446101 W......................................E33
3539956 ..... 446102 W......................................E33
3539957 ..... 446103 W......................................E33
3539958 ..... 446104 W............................... E33–34
3540016 ..... 606243........................................E128
3540017 ..... 606244........................................E128
3540019 ..... 606247............................... E124–125
3540021 ..... 606249 W............................... E30–32
3540039 ..... 613139........................................E128
3540093 ..... 619168 W.......E30–31, E33–34, E123
3540117 ..... 619205 W....................... E30–31, E33
3540447 ..... 507116 M45 ...............................E119
3540449 ..... 507116 M40 ...............................E119
3540452 ..... 507116 C5 ..................................E119
3540456 ..... 507117 C2 ..................................E119
3540459 ..... 507117 M45 ...............................E119
3540460 ..... 507117 M93 ...............................E119
3540461 ..... 507117 M40 ...............................E119
3540476 ..... 507124 GC ..................................E120
3540477 ..... 507124 M45 ...............................E120
3540478 ..... 507124 M93 ...............................E120
3540479 ..... 507124 M40 ...............................E120
3540487 ..... 507125 M40 ...............................E119
3540493 ..... 507128 C2 ..................................E120
3540496 ..... 507128 M45 ...............................E120
3540497 ..... 507128 M93 ...............................E120
3540498 ..... 507128 M40 ...............................E120
3540509 ..... 507129 M45 ...............................E119
3540510 ..... 507129 M40 ...............................E119
3540528 ..... 507140 M45 ...............................E119
3540529 ..... 507140 M93 ...............................E119
3540530 ..... 507140 M40 ...............................E119
3540539 ..... 507143 C2 ..................................E120
3540542 ..... 507143 M45 ...............................E120
3540543 ..... 507143 M93 ...............................E120
3540544 ..... 507143 M40 ...............................E120
3540553 ..... 507144 M45 ...............................E119
3540554 ..... 507144 M40 ...............................E119
3540560 ..... 507146 M45 ...............................E120
3540562 ..... 507146 M40 ...............................E120
3540585 ..... 507151 M43 ...............................E120
3540587 ..... 507151 M45 ...............................E120
3540589 ..... 507151 M40 ...............................E120
3540594 ..... 507152 M40 ...............................E119
3540597 ..... 507154 M45 ...............................E119
3540598 ..... 507154 M40 ...............................E119
3540602 ..... 507155 M45 ...............................E120
3540603 ..... 507155 M40 ...............................E120
3540612 ..... 507161 M45 ...............................E120
3540613 ..... 507161 M40 ...............................E120
3540628 ..... 507171 M40 ...............................E120
3540633 ..... 507176 M45 ...............................E120
3540634 ..... 507176 M40 ...............................E120
3540663 ..... 507196 M45 ...............................E119
3540664 ..... 507196 M40 ...............................E119
3540666 ..... 507197 M40 ...............................E120
3540685 ..... 507207 M45 ...............................E120
Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 21 11/2/15 10:33 AM
LViWID M 16 I d Z002 Z145 M i REBRAND O b 28 2015 3 09 PM
Z22 widia.com
Index by Order Number
Order No. Catalogue No. Page(s)
3540691 ..... 507214 M45 ...............................E120
3540692 ..... 507214 M40 ...............................E120
3540698 ..... 507224 M45 ...............................E120
3540700 ..... 507224 M40 ...............................E120
3540743 ..... 507240 M45 ...............................E121
3540744 ..... 507240 M40 ...............................E121
3540746 ..... 507241 M45 ...............................E121
3540747 ..... 507241 M40 ...............................E121
3540749 ..... 507242 M45 ...............................E121
3540750 ..... 507242 M40 ...............................E121
3540752 ..... 507243 M45 ...............................E121
3540753 ..... 507243 M40 ...............................E121
3540755 ..... 507244 M45 ...............................E121
3540756 ..... 507244 M40 ...............................E121
3540758 ..... 507245 M45 ...............................E121
3540759 ..... 507245 M40 ...............................E121
3540761 ..... 507246 M45 ...............................E121
3540762 ..... 507246 M40 ...............................E121
3540763 ..... 507247 M45 ...............................E121
3540764 ..... 507247 M40 ...............................E121
3540773 ..... 507252 M45 ...............................E121
3540774 ..... 507252 M40 ...............................E121
3540776 ..... 507253 M45 ...............................E121
3540777 ..... 507253 M40 ...............................E121
3540781 ..... 507255 M40 ...............................E121
3540784 ..... 507257 M45 ...............................E121
3540803 ..... 507275 M43 ...............................E116
3540805 ..... 507275 M45 ...............................E116
3540806 ..... 507275 M93 ...............................E116
3540807 ..... 507275 M40 ...............................E116
3540808 ..... 507276 M43 ...............................E117
3540810 ..... 507276 M45 ...............................E117
3540811 ..... 507276 M93 ...............................E117
3540812 ..... 507276 M40 ...............................E117
3540815 ..... 507277 M45 ...............................E116
3540816 ..... 507277 M93 ...............................E116
3540818 ..... 507278 M43 ...............................E116
3540820 ..... 507278 M45 ...............................E116
3540821 ..... 507278 M93 ...............................E116
3540822 ..... 507278 M40 ...............................E116
3540823 ..... 507279 M43 ...............................E117
3540825 ..... 507279 M45 ...............................E117
3540826 ..... 507279 M93 ...............................E117
3540827 ..... 507279 M40 ...............................E117
3540830 ..... 507280 M45 ...............................E116
3540833 ..... 507281 M43 ...............................E116
3540835 ..... 507281 M45 ...............................E116
3540836 ..... 507281 M93 ...............................E116
3540838 ..... 507282 M43 ...............................E117
3540840 ..... 507282 M45 ...............................E117
3540841 ..... 507282 M93 ...............................E117
3540846 ..... 507283 M93 ...............................E116
3540857 ..... 507295 M43 ...............................E116
3540858 ..... 507295 M45 ...............................E116
3540859 ..... 507295 M93 ...............................E116
3540860 ..... 507296 M43 ...............................E117
3540861 ..... 507296 M45 ...............................E117
3540862 ..... 507296 M93 ...............................E117
3540863 ..... 507297 M43 ...............................E116
3540865 ..... 507297 M93 ...............................E116
3540866 ..... 507298 M43 ...............................E117
3540867 ..... 507298 M45 ...............................E117
3540868 ..... 507298 M93 ...............................E117
3540870 ..... 507301 M45 ...............................E117
3540872 ..... 507305 M45 ...............................E114
3540873 ..... 507305 M93 ...............................E114
3540874 ..... 507306 M45 ...............................E114
3540875 ..... 507306 M93 ...............................E114
3540876 ..... 507307 M45 ...............................E114
3540877 ..... 507307 M93 ...............................E114
3540878 ..... 507308 M43 ...............................E114
3540879 ..... 507308 M45 ...............................E114
3540880 ..... 507308 M93 ...............................E114
3540882 ..... 507309 M45 ...............................E114
3540883 ..... 507309 M93 ...............................E114
3540884 ..... 507310 M45 ...............................E114
3540885 ..... 507310 M93 ...............................E114
3540907 ..... 507329 M433B ...........................E118
3540908 ..... 507330 M433B ...........................E118
3540909 ..... 507331 M433B ...........................E118
3540910 ..... 507332 M433B ...........................E118
3540911 ..... 507333 M433B ...........................E118
3540912 ..... 507334 M433B ...........................E118
3540926 ..... 507354 M433B ...........................E115
3540927 ..... 507355 M433B ...........................E115
3540928 ..... 507356 M433B ...........................E115
3540929 ..... 507357 M433B ...........................E115
3540930 ..... 507358 M433B ...........................E115
3540931 ..... 507359 M433B ...........................E115
3540951 ..... 507378 M43 ...............................E116
3540952 ..... 507378 M45 ...............................E116
3540953 ..... 507378 M93 ...............................E116
3540954 ..... 507379 M43 ...............................E117
3540955 ..... 507379 M45 ...............................E117
3548062 ..... SCMT09T308MU TN5120 ............. B69
3558220 ..... CCMT060208MU TN5120 ............. B33
3558297 ..... CCMT120408MU TN5120 ............. B33
3558306 ..... SCMT090308MU TN5120 ............. B69
3562029 ..... 606266 W......................................E32
3563591 ..... 331117........................................E125
3563900 ..... HNGJ0905ANSNHD TN6520 ........ H28,
H34, H40
3563901 ..... HNGJ0905ANSNHD TN6525 ........ H28,
H34, H40
3563902 ..... HNGJ0905ANSNHD TN6540 ........ H28,
H34, H40
3564083 ..... HNGJ090543ANSNHD TN6520 .... H28,
H34, H40
3564084 ..... HNGJ090543ANSNHD TN6525 .... H28,
H34, H40
3564085 ..... HNGJ090543ANSNHD TN6540 .... H28,
H34, H40
3565364 ..... 206285........................................E122
3587590 ..... 206448........................................E122
3592826 ..... 477804002MW ALTIN-MW ............. O6
3592827 ..... 477805002MW ALTIN-MW ............. O6
3592828 ..... 477806002MW ALTIN-MW ............. O6
3592829 ..... 477807003MW ALTIN-MW ............. O6
3592830 ..... 477808003MW ALTIN-MW ............. O6
3592831 ..... 477809004MW ALTIN-MW ............. O6
3592832 ..... 477810004MW ALTIN-MW ............. O6
3592833 ..... 477812005MW ALTIN-MW ............. O6
3592834 ..... 477814014MW ALTIN-MW ............. O6
3592835 ..... 477816006MW ALTIN-MW ............. O6
3592836 ..... 477818018MW ALTIN-MW ............. O6
3592837 ..... 477820007MW ALTIN-MW ............. O6
3592838 ..... 477825008MW ALTIN-MW ............. O6
3597589 ..... MS2219 ..................................... M4–6
3606383 ..... HNGJ0905ANFNLDJ THM-U ......... H27,
H33, H39
3606522 ..... NG3M300LK TN6010 .....................E58
3606660 ..... NG3094RK TN6010 .......................E54
3606673 ..... NG2M170RK TN6010 ....................E53
3606674 ..... NG3M225RK TN6010 ....................E54
3606676 ..... NG2M300RK TN6010 ....................E55
3606677 ..... NG3M275RK TN6010 ....................E55
3606678 ..... NG3M400RK TN6010 ....................E55
3606679 ..... NG2M120RK TN6010 ....................E53
3606680 ..... NG2M300LK TN6010 .....................E58
3606827 ..... NG2M120LK TN6010 .....................E57
3606828 ..... NG2M225RK TN6010 ....................E54
3606829 ..... NG2M195RK TN6010 ....................E54
3606830 ..... NG4M500RK TN6010 ....................E56
3606831 ..... NG3M275LK TN6010 .....................E58
3606832 ..... NG4M500LK TN6010 .....................E59
3606903 ..... NG2M080RK TN6010 ....................E53
3606904 ..... NG2M140LK TN6010 .....................E57
3606905 ..... NG2M170LK TN6010 .....................E57
3606906 ..... NG3M400LK TN6010 .....................E59
3606907 ..... NG2M225LK TN6010 .....................E58
3606908 ..... NG4M400RK TN6010 ....................E55
3606909 ..... NG3M225LK TN6010 .....................E58
3606910 ..... NG2M195LK TN6010 .....................E57
3606911 ..... NG2M080LK TN6010 .....................E56
3606912 ..... NG4M400LK TN6010 .....................E59
3606913 ..... NG2M275LK TN6010 .....................E58
3606914 ..... NG3M425RK TN6010 ....................E55
3606915 ..... NG3M120RK TN6010 ....................E53
3606916 ..... NG2M275RK TN6010 ....................E54
3606917 ..... NG3M120LK TN6010 .....................E57
3606918 ..... NG3M425LK TN6010 .....................E59
3606921 ..... NGD3M400LK TN6010 ..................E62
3606922 ..... NGD3M300RK TN6010 ..................E60
3606923 ..... NGD4M400LK TN6010 ..................E62
3606924 ..... NR2M075L TN6010 .......................E68
3606925 ..... NR2M100L TN6010 .......................E68
3606926 ..... NR2M125L TN6010 .......................E69
3606927 ..... NR2M150L TN6010 .......................E69
3606928 ..... NR2M175L TN6010 .......................E69
3606929 ..... NR2M075R TN6010 .......................E67
3606930 ..... NR2M100R TN6010 .......................E67
3606931 ..... NR2M125R TN6010 .......................E67
3606932 ..... NR2M150R TN6010 .......................E67
3606933 ..... NR2M175R TN6010 .......................E67
3606934 ..... NR3M225L TN6010 .......................E69
3606935 ..... NGD2M150LK TN6010 ..................E61
3606936 ..... NGD2M200LK TN6010 ..................E61
3606937 ..... NGD2M150RK TN6010 ..................E60
3606938 ..... NGD2M200RK TN6010 ..................E60
3606939 ..... NGD2M250RK TN6010 ..................E60
3606940 ..... NGD3M400RK TN6010 ..................E60
3606941 ..... NGD3M200LK TN6010 ..................E61
3606942 ..... NGD3M250LK TN6010 ..................E61
3606943 ..... NGD3M300LK TN6010 ..................E61
3606945 ..... NGD3M200RK TN6010 ..................E60
3606946 ..... NGD3M250RK TN6010 ..................E60
3606948 ..... NR2M050L TN6010 .......................E68
3606949 ..... NR3M100L TN6010 .......................E68
3606950 ..... NR3M125L TN6010 .......................E69
3606951 ..... NR3M150L TN6010 .......................E69
3606952 ..... NR3M175L TN6010 .......................E69
3606953 ..... NR3M200L TN6010 .......................E69
3606954 ..... NR4M200L TN6010 .......................E69
3606955 ..... NR4M225L TN6010 .......................E69
3606956 ..... NR4M250L TN6010 .......................E69
3606957 ..... NR2M050R TN6010 .......................E67
3606958 ..... NR3M100R TN6010 .......................E67
3606959 ..... NR3M125R TN6010 .......................E67
3606960 ..... NR3M150R TN6010 .......................E67
3606961 ..... NR3M175R TN6010 .......................E67
3606962 ..... NR3M200R TN6010 .......................E68
3606963 ..... NR3M225R TN6010 .......................E68
3606964 ..... NR4M200R TN6010 .......................E68
3606965 ..... NR4M225R TN6010 .......................E68
3606966 ..... NR4M250R TN6010 .......................E68
3606967 ..... NGP2M150L TN6010 .....................E64
3606968 ..... NGP2M200L TN6010 .....................E64
3606969 ..... NGP2M250L TN6010 .....................E64
3606971 ..... NGP3M150L TN6010 .....................E64
3606972 ..... NGP3M200L TN6010 .....................E64
3606973 ..... NGP3M250L TN6010 .....................E64
3606974 ..... NGP3M300L TN6010 .....................E64
3606975 ..... NGP2M150R TN6010 ....................E63
3606976 ..... NGP2M200R TN6010 ....................E63
3606977 ..... NGP2M250R TN6010 ....................E63
3606978 ..... NGP2M300R TN6010 ....................E63
3606979 ..... NGP3M150R TN6010 ....................E63
3606980 ..... NGP3M200R TN6010 ....................E63
3606981 ..... NGP3M250R TN6010 ....................E63
3606986 ..... NGD4M400RK TN6010 ..................E60
3606988 ..... NGD4M500RK TN6010 ..................E61
3606989 ..... NGD4M550RK TN6010 ..................E61
3606990 ..... NG2M050LK TN6010 .....................E56
3606991 ..... NG2M050RK TN6010 ....................E53
3606992 ..... NGD2M250LK TN6010 ..................E61
3607014 ..... NG3062R THM ...............................E51
3607015 ..... NR3031R THM ...............................E67
3607016 ..... NB2L THM ......................................E72
3607017 ..... NB3L THM ......................................E72
3607018 ..... NG3094R THM ...............................E51
3607019 ..... NB3R THM .....................................E72
3607020 ..... NG3125R THM ...............................E51
3607022 ..... NG3125L THM ...............................E52
3607026 ..... NR3062R THM ...............................E67
3607027 ..... NG2062R THM ...............................E51
3607028 ..... NR3047L THM ...............................E68
3607029 ..... NGD3094RK THM...........................E60
3607030 ..... NG2031R THM ...............................E51
3607031 ..... NR3047R THM ...............................E67
3607032 ..... NR3062L THM ...............................E69
3607034 ..... NR3031L THM ...............................E68
3607035 ..... NGD3094LK THM ...........................E61
3607036 ..... NG3047L THM ...............................E51
3607037 ..... NGP2M150L THM ..........................E64
3607038 ..... NGP2M200L THM ..........................E64
3607039 ..... NGP2M250L THM ..........................E64
3607040 ..... NGP2M300L THM ..........................E64
3607041 ..... NGP3M150L THM ..........................E64
3607042 ..... NGP3M200L THM ..........................E64
3607043 ..... NGP3M250L THM ..........................E64
3607044 ..... NGP3M300L THM ..........................E64
3607045 ..... NGP2M150R THM ..........................E63
3607046 ..... NGP2M200R THM ..........................E63
3607047 ..... NGP2M250R THM ..........................E63
3607048 ..... NGP2M300R THM ..........................E63
3607049 ..... NGP3M150R THM ..........................E63
3607050 ..... NGP3M200R THM ..........................E63
3607051 ..... NGP3M250R THM ..........................E63
3607052 ..... NGP3M300R THM ..........................E63
3607055 ..... NG3062RK TN6010 .......................E53
3607056 ..... NR3062RK TN6010 ........................E70
3607057 ..... NG3125RK TN6010 .......................E55
3607058 ..... NG3094LK TN6010 ........................E58
3607061 ..... NG3125LK TN6010 ........................E58
Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 22 11/2/15 10:33 AM
LViWID M 16 I d Z002 Z145 M i REBRANDO b 28 20153 09PM
Z23
widia.com
Index by Order Number
Order No. Catalogue No. Page(s)
3607062 ..... NR3031RK TN6010 ........................E70
3607064 ..... NB2R THM .....................................E72
3607068 ..... NG3125RK TN6025 .......................E55
3607069 ..... NG3094RK TN6025 .......................E54
3607070 ..... NG3062RK TN6025 .......................E53
3607071 ..... NG2M200RK TN6025 ....................E54
3607072 ..... NG3M300RK TN6025 ....................E55
3607083 ..... NGD3094RK TN6010 .....................E60
3607084 ..... NG3047RK TN6010 .......................E53
3607085 ..... NRD3031L TN6010 ........................E71
3607086 ..... NR3047RK TN6010 ........................E70
3607087 ..... NRD3031R TN6010 .......................E71
3607088 ..... NGD3125RK TN6010 .....................E60
3607089 ..... NG2062RK TN6010 .......................E53
3607090 ..... NG2031RK TN6010 .......................E53
3607091 ..... NR3062LK TN6010 ........................E70
3607092 ..... NG3062LK TN6010 ........................E57
3607093 ..... NR3047R TN6010 ..........................E67
3607094 ..... NR3078RK TN6010 ........................E70
3607095 ..... NR3031LK TN6010 ........................E70
3607096 ..... NGD3094LK TN6010 .....................E61
3607097 ..... NGD3125LK TN6010 .....................E61
3607098 ..... NGD3062LK TN6010 .....................E61
3607099 ..... NRD3062R TN6010 .......................E71
3607100 ..... NG2M200RK TN6010 ....................E54
3607101 ..... NR4094RK TN6010 ........................E70
3607102 ..... NR3047LK TN6010 ........................E70
3607103 ..... NG4189RK TN6010 .......................E56
3607104 ..... NGD3062RK TN6010 .....................E60
3607105 ..... NG3047LK TN6010 ........................E56
3607106 ..... NG3078LK TN6010 ........................E57
3607107 ..... NG3189LK TN6010 ........................E59
3607108 ..... NG3189RK TN6010 .......................E56
3607109 ..... NG3062R TN6010..........................E51
3607110 ..... NG3125R TN6010..........................E51
3607111 ..... NG3078RK TN6010 .......................E54
3607112 ..... NG2031LK TN6010 ........................E56
3607123 ..... NG2047RK TN6010 .......................E53
3607124 ..... NRD3062L TN6010 ........................E71
3607125 ..... NR3031R TN6010 ..........................E67
3607126 ..... NG2062LK TN6010 ........................E57
3607127 ..... NG3156RK TN6010 .......................E55
3607128 ..... NGP2062R TN6010 .......................E63
3607129 ..... NG2M100RK TN6010 ....................E53
3607130 ..... NR4125R TN6010 ..........................E68
3607131 ..... NR3062R TN6010 ..........................E67
3607132 ..... NGD4125LK TN6010 .....................E61
3607133 ..... NGD4125RK TN6010 .....................E60
3607134 ..... NGD4250RK TN6010 .....................E61
3607135 ..... NR3047L TN6010 ..........................E68
3607136 ..... NP2002RK TN6010 ........................E66
3607137 ..... NG3094R TN6010..........................E51
3607138 ..... NG3M300RK TN6010 ....................E55
3607139 ..... NR3031L TN6010 ..........................E68
3607140 ..... NG4189LK TN6010 ........................E59
3607141 ..... NR4125RK TN6010 ........................E70
3607142 ..... NG4250LK TN6010 ........................E59
3607143 ..... NG4250R TN6010..........................E51
3607144 ..... NG2M200LK TN6010 .....................E57
3607145 ..... NG3072RK TN6010 .......................E54
3607146 ..... NG2094RK TN6010 .......................E54
3607147 ..... NGD4189LK TN6010 .....................E62
3607148 ..... NGD3189LK TN6010 .....................E62
3607149 ..... NG2094LK TN6010 ........................E58
3607150 ..... NR4094LK TN6010 ........................E70
3607151 ..... NG2M140RK TN6010 ....................E53
3607152 ..... NG3125L TN6010 ..........................E52
3607153 ..... NG2031R TN6010..........................E51
3607154 ..... NP3002RK TN6010 ........................E66
3607155 ..... NG2125RK TN6010 .......................E55
3607156 ..... NR4062LK TN6010 ........................E70
3607157 ..... NG3047R TN6010..........................E51
3607158 ..... NG3062L TN6010 ..........................E51
3607159 ..... NG2M100LK TN6010 .....................E56
3607160 ..... NG3094L TN6010 ..........................E52
3607161 ..... NGD4189RK TN6010 .....................E61
3607162 ..... NRD4062L TN6010 ........................E71
3607163 ..... NG4125RK TN6010 .......................E55
3607165 ..... NG2125LK TN6010 ........................E58
3607166 ..... NR4125LK TN6010 ........................E70
3607167 ..... NG2062R TN6010..........................E51
3607168 ..... NG4250RK TN6010 .......................E56
3607169 ..... NR3094L TN6010 ..........................E69
3607170 ..... NGD3189RK TN6010 .....................E60
3607171 ..... NR3062L TN6010 ..........................E69
3607172 ..... NR3078LK TN6010 ........................E70
3607173 ..... NRD4062R TN6010 .......................E71
3607174 ..... NR2031R TN6010 ..........................E67
3607175 ..... NG4250L TN6010 ..........................E52
3607176 ..... NR2031L TN6010 ..........................E68
3607177 ..... NG3156LK TN6010 ........................E59
3607178 ..... NGD4250LK TN6010 .....................E62
3607179 ..... NG3047L TN6010 ..........................E51
3607180 ..... NR3094R TN6010 ..........................E68
3607181 ..... NR4125L TN6010 ..........................E69
3607182 ..... NGP2062L TN6010 ........................E64
3607183 ..... NG4125LK TN6010 ........................E58
3607184 ..... NG3072LK TN6010 ........................E57
3607186 ..... NRD4125L TN6010 ........................E71
3607203 ..... NG3125LK TN6025 ........................E58
3607204 ..... NG3094LK TN6025 ........................E58
3607205 ..... NGD3094RK TN6025 .....................E60
3607206 ..... NR3031RK TN6025 ........................E70
3607207 ..... NG2M200LK TN6025 .....................E57
3607208 ..... NG3M200RK TN6025 ....................E54
3607209 ..... NGD3125LK TN6025 .....................E61
3607210 ..... NGD3125RK TN6025 .....................E60
3607211 ..... NG3M200LK TN6025 .....................E57
3607212 ..... NG3M300LK TN6025 .....................E58
3607213 ..... NG3062LK TN6025 ........................E57
3607214 ..... NR3047RK TN6025 ........................E70
3607215 ..... NG2062RK TN6025 .......................E53
3607216 ..... NR3062LK TN6025 ........................E70
3607217 ..... NG3M250RK TN6025 ....................E54
3607218 ..... NG2M100RK TN6025 ....................E53
3607219 ..... NG3M100RK TN6025 ....................E53
3607220 ..... NG4189RK TN6025 .......................E56
3607221 ..... NG3M150RK TN6025 ....................E53
3607222 ..... NR3031LK TN6025 ........................E70
3607233 ..... NGD3062RK TN6025 .....................E60
3607234 ..... NG2M150RK TN6025 ....................E53
3607235 ..... NG3M400RK TN6025 ....................E55
3607236 ..... NR3062RK TN6025 ........................E70
3607237 ..... NG3M400LK TN6025 .....................E59
3607238 ..... NG3047RK TN6025 .......................E53
3607239 ..... NG2M100LK TN6025 .....................E56
3607240 ..... NGD3094LK TN6025 .....................E61
3607241 ..... NF3125RK TN6025 ........................E65
3607242 ..... NG2M170RK TN6025 ....................E53
3607291 ..... NG2M080RK TN6025 ....................E53
3607292 ..... NG2M275LK TN6025 .....................E58
3607293 ..... NFD3125LK TN6025 ......................E66
3607294 ..... NG2M150LK TN6025 .....................E57
3607295 ..... NRD4062L TN6025 ........................E71
3607296 ..... NFD3125RK TN6025 ......................E66
3607297 ..... NG3M275LK TN6025 .....................E58
3607298 ..... NRD4125L TN6025 ........................E71
3607299 ..... NG2M120RK TN6025 ....................E53
3607300 ..... NG3M250LK TN6025 .....................E58
3607301 ..... NR2031R TN6025 ..........................E67
3607302 ..... NG3M350RK TN6025 ....................E55
3607303 ..... NR4125RK TN6025 ........................E70
3607304 ..... NG4250RK TN6025 .......................E56
3607305 ..... NG3189RK TN6025 .......................E56
3607306 ..... NR3078LK TN6025 ........................E70
3607307 ..... NG2062LK TN6025 ........................E57
3607308 ..... NG3M150LK TN6025 .....................E57
3607309 ..... NG3078RK TN6025 .......................E54
3607310 ..... NG3M225RK TN6025 ....................E54
3607311 ..... NG4250LK TN6025 ........................E59
3607312 ..... NGD4125RK TN6025 .....................E60
3607313 ..... NG2031RK TN6025 .......................E53
3607314 ..... NGD4189LK TN6025 .....................E62
3607315 ..... NG3M325LK TN6025 .....................E59
3607316 ..... NGD4125LK TN6025 .....................E61
3607317 ..... NG2094RK TN6025 .......................E54
3607318 ..... NG2M140RK TN6025 ....................E53
3607319 ..... NR2031L TN6025 ..........................E68
3607320 ..... NG3189LK TN6025 ........................E59
3607321 ..... NGD4189RK TN6025 .....................E61
3607322 ..... NF3125LK TN6025 ........................E65
3607323 ..... NG3094L TN6025 ..........................E52
3607324 ..... NG2M250RK TN6025 ....................E54
3607325 ..... NFD4189RK TN6025 ......................E66
3607326 ..... NG2M300LK TN6025 .....................E58
3607327 ..... NG2M170LK TN6025 .....................E57
3607328 ..... NP3012RK TN6025 ........................E66
3607329 ..... NG3M225LK TN6025 .....................E58
3607330 ..... NG2041R TN6025..........................E51
3607331 ..... NG3M175LK TN6025 .....................E57
3607332 ..... NG3072RK TN6025 .......................E54
3607333 ..... NF3156LK TN6025 ........................E65
3607334 ..... NG2M120LK TN6025 .....................E57
3607335 ..... NG3156LK TN6025 ........................E59
3607336 ..... NG3M220RK TN6025 ....................E54
3607337 ..... NG3M275RK TN6025 ....................E55
3607338 ..... NG2M140LK TN6025 .....................E57
3607339 ..... NR3094L TN6025 ..........................E69
3607340 ..... NG2M300RK TN6025 ....................E55
3607362 ..... NG3M450RK TN6025 ....................E56
3607363 ..... NG4M400LK TN6025 .....................E59
3607364 ..... NG4M400RK TN6025 ....................E55
3607365 ..... NG3M320RK TN6025 ....................E55
3607366 ..... NG4M550LK TN6025 .....................E59
3607367 ..... NG2M220LK TN6025 .....................E57
3607368 ..... NG2M325LK TN6025 .....................E59
3607369 ..... NG3M450LK TN6025 .....................E59
3607370 ..... NG4M350RK TN6025 ....................E55
3607371 ..... NG4M350LK TN6025 .....................E59
3607372 ..... NG3M320LK TN6025 .....................E58
3607373 ..... NGD3189RK TN6025 .....................E60
3607374 ..... NG3047LK TN6025 ........................E56
3607375 ..... NG3125R TN6025..........................E51
3607376 ..... NG2047LK TN6025 ........................E56
3607377 ..... NG4189LK TN6025 ........................E59
3607378 ..... NFD4250RK TN6025 ......................E66
3607379 ..... NG2M175RK TN6025 ....................E54
3607380 ..... NG2094LK TN6025 ........................E58
3607381 ..... NG2125RK TN6025 .......................E55
3607382 ..... NG4250R TN6025..........................E51
3607383 ..... NG4M550RK TN6025 ....................E56
3607384 ..... NG3M120LK TN6025 .....................E57
3607385 ..... NG4M600RK TN6025 ....................E56
3607386 ..... NG4M300LK TN6025 .....................E58
3607387 ..... NG4M600LK TN6025 .....................E59
3607388 ..... NG4M300RK TN6025 ....................E55
3607389 ..... NG4M450LK TN6025 .....................E59
3607390 ..... NG4M450RK TN6025 ....................E56
3607391 ..... NGD2M250LK TN6025 ..................E61
3607393 ..... NR2M050R TN6025 .......................E67
3607394 ..... NG2M050RK TN6025 ....................E53
3607395 ..... NR3M100L TN6025 .......................E68
3607396 ..... NR3M200L TN6025 .......................E69
3607397 ..... NR3M100R TN6025 .......................E67
3607398 ..... NR3M200R TN6025 .......................E68
3607399 ..... NGD2M200LK TN6025 ..................E61
3607400 ..... NGD3M300LK TN6025 ..................E61
3607401 ..... NR2M050L TN6025 .......................E68
3607402 ..... NGD2M150LK TN6025 ..................E61
3607403 ..... NG3062R TN6025..........................E51
3607404 ..... NG2047RK TN6025 .......................E53
3607405 ..... NR4062LK TN6025 ........................E70
3607406 ..... NG3094R TN6025..........................E51
3607407 ..... NR3078RK TN6025 ........................E70
3607408 ..... NR3047LK TN6025 ........................E70
3607409 ..... NG2M275RK TN6025 ....................E54
3607410 ..... NGD3189LK TN6025 .....................E62
3607411 ..... NG2M225RK TN6025 ....................E54
3607412 ..... NG3M120RK TN6025 ....................E53
3607413 ..... NG2M225LK TN6025 .....................E58
3607414 ..... NGD4250RK TN6025 .....................E61
3607415 ..... NFD4189LK TN6025 ......................E66
3607416 ..... NG3047R TN6025..........................E51
3607417 ..... NG2M195RK TN6025 ....................E54
3607418 ..... NG3M175RK TN6025 ....................E54
3607419 ..... NG3M100LK TN6025 .....................E56
3607420 ..... NG2M195LK TN6025 .....................E57
3607421 ..... NG2M175LK TN6025 .....................E57
3607422 ..... NGD4250LK TN6025 .....................E62
3607423 ..... NGD3M250LK TN6025 ..................E61
3607424 ..... NGD3M400LK TN6025 ..................E62
3607425 ..... NGD3M250RK TN6025 ..................E60
3607426 ..... NGD3M300RK TN6025 ..................E60
3607427 ..... NGD3M400RK TN6025 ..................E60
3607428 ..... NF3M200LK TN6025 .....................E65
3607429 ..... NF3M300LK TN6025 .....................E65
3607430 ..... NR2M075L TN6025 .......................E68
3607431 ..... NR2M100L TN6025 .......................E68
3607432 ..... NR2M125L TN6025 .......................E69
3607433 ..... NR2M150L TN6025 .......................E69
3607434 ..... NR2M175L TN6025 .......................E69
3607435 ..... NR3M125L TN6025 .......................E69
3607436 ..... NR3M150L TN6025 .......................E69
3607437 ..... NR3M175L TN6025 .......................E69
3607438 ..... NR3M225L TN6025 .......................E69
3607439 ..... NR3M125R TN6025 .......................E67
3607440 ..... NR3M150R TN6025 .......................E67
3607441 ..... NR3M175R TN6025 .......................E67
3607442 ..... NR3M225R TN6025 .......................E68
3607443 ..... NG2031LK TN6025 ........................E56
3607444 ..... NG2125LK TN6025 ........................E58
3607445 ..... NG3125L TN6025 ..........................E52
3607446 ..... NR2047L TN6025 ..........................E68
3607447 ..... NG4M500RK TN6025 ....................E56
Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 23 11/2/15 10:33 AM
LViWID M 16 I d Z002 Z145 M i REBRAND O b 28 2015 3 09 PM
Z24 widia.com
Index by Order Number
Order No. Catalogue No. Page(s)
3607448 ..... NG4125LK TN6025 ........................E58
3607449 ..... NG4125RK TN6025 .......................E55
3607450 ..... NG2058R TN6025..........................E51
3607451 ..... NGD3062LK TN6025 .....................E61
3607452 ..... NR4094LK TN6025 ........................E70
3607453 ..... NG2062R TN6025..........................E51
3607454 ..... NG3072LK TN6025 ........................E57
3607455 ..... NRD3031L TN6025 ........................E71
3607456 ..... NG3156RK TN6025 .......................E55
3607457 ..... NRD3031R TN6025 .......................E71
3607458 ..... NR4125LK TN6025 ........................E70
3607459 ..... NG3062L TN6025 ..........................E51
3607460 ..... NG3078LK TN6025 ........................E57
3607461 ..... NR4062RK TN6025 ........................E70
3607462 ..... NRD3062L TN6025 ........................E71
3607463 ..... NG2M050LK TN6025 .....................E56
3607464 ..... NFD3M300LK TN6025 ...................E66
3607465 ..... NGD2M200RK TN6025 ..................E60
3607466 ..... NR4M200L TN6025 .......................E69
3607467 ..... NR4M225L TN6025 .......................E69
3607468 ..... NR4M250L TN6025 .......................E69
3607469 ..... NR2M075R TN6025 .......................E67
3607470 ..... NR2M100R TN6025 .......................E67
3607471 ..... NR2M125R TN6025 .......................E67
3607472 ..... NR2M150R TN6025 .......................E67
3607473 ..... NR3062R TN6025 ..........................E67
3607474 ..... NRD3062R TN6025 .......................E71
3607475 ..... NR3031R TN6025 ..........................E67
3607476 ..... NR3094R TN6025 ..........................E68
3607477 ..... NP2002RK TN6025 ........................E66
3607478 ..... NR3031L TN6025 ..........................E68
3607479 ..... NR3047L TN6025 ..........................E68
3607480 ..... NR4094RK TN6025 ........................E70
3607481 ..... NG2062L TN6025 ..........................E51
3607482 ..... NG2031L TN6025 ..........................E51
3607483 ..... NR2M175R TN6025 .......................E67
3607484 ..... NR4M200R TN6025 .......................E68
3607485 ..... NR4M225R TN6025 .......................E68
3607486 ..... NR4M250R TN6025 .......................E68
3607487 ..... NGD3M200LK TN6025 ..................E61
3607488 ..... NGD3M350LK TN6025 ..................E61
3607489 ..... NGD4M400LK TN6025 ..................E62
3607490 ..... NGD4M450LK TN6025 ..................E62
3607491 ..... NGD4M500LK TN6025 ..................E62
3607492 ..... NGD4M550LK TN6025 ..................E62
3607493 ..... NP3002RK TN6025 ........................E66
3607494 ..... NR2047R TN6025 ..........................E67
3607495 ..... NG2031R TN6025..........................E51
3607496 ..... NRD4125R TN6025 .......................E71
3607497 ..... NR3062L TN6025 ..........................E69
3607498 ..... NG2058L TN6025 ..........................E51
3607499 ..... NRD4062R TN6025 .......................E71
3607500 ..... NR4125R TN6025 ..........................E68
3607501 ..... NG3047L TN6025 ..........................E51
3607502 ..... NR3047R TN6025 ..........................E67
3607503 ..... NGD2M150RK TN6025 ..................E60
3607504 ..... NGD2M250RK TN6025 ..................E60
3607505 ..... NGD3M200RK TN6025 ..................E60
3607506 ..... NGD3M350RK TN6025 ..................E60
3607507 ..... NGD4M400RK TN6025 ..................E60
3607508 ..... NGD4M450RK TN6025 ..................E60
3607509 ..... NGD4M500RK TN6025 ..................E61
3607511 ..... NF3M200RK TN6025 .....................E65
3607512 ..... NF3M300RK TN6025 .....................E65
3607513 ..... NG4250L TN6025 ..........................E52
3607514 ..... NR4125L TN6025 ..........................E69
3607515 ..... NG3M325RK TN6025 ....................E55
3607516 ..... NG3M220LK TN6025 .....................E58
3607517 ..... NG3M425RK TN6025 ....................E55
3607518 ..... NG2M250LK TN6025 .....................E58
3607519 ..... NG3M350LK TN6025 .....................E59
3607520 ..... NG3M425LK TN6025 .....................E59
3607521 ..... NG2M220RK TN6025 ....................E54
3607522 ..... NG4M500LK TN6025 .....................E59
3607523 ..... NFD3M300RK TN6025 ...................E66
3607528 ..... NTK3R TN6010 ..............................F16
3607530 ..... NT3R TN6010 ................................F14
3607531 ..... NTF3R TN6010 ..............................F16
3607532 ..... NT3L TN6010 ................................F14
3607533 ..... NG2M325RK TN6025 ....................E55
3607534 ..... NG2M080LK TN6025 .....................E56
3607628 ..... NG3062RK TN7110 .......................E53
3607629 ..... NG3189LK TN7110 ........................E59
3607630 ..... NG3189RK TN7110 .......................E56
3607631 ..... NG3062LK TN7110 ........................E57
3607643 ..... NT3RK TN6010 ..............................F13
3607644 ..... NTP3R TN6010 ..............................F15
3607645 ..... NT3LK TN6010 ..............................F13
3607646 ..... NTK2R TN6010 ..............................F16
3607647 ..... NT2R TN6010 ................................F14
3607648 ..... NJK3008R20 TN6010 ....................F18
3607649 ..... NT3RCK TN6010 ............................F15
3607650 ..... NTP3L TN6010 ..............................F15
3607651 ..... NT2RK TN6010 ..............................F13
3607652 ..... NTF3L TN6010 ...............................F16
3607653 ..... NG4M350LK TN7110 .....................E59
3607655 ..... NG3M300RK TN7110 ....................E55
3607656 ..... NG3M400LK TN7110 .....................E59
3607662 ..... NG3M200RK TN7110 ....................E54
3607663 ..... NG3M150LK TN7110 .....................E57
3607664 ..... NG3M250RK TN7110 ....................E54
3607666 ..... NG3M200LK TN7110 .....................E57
3607668 ..... NG3M150RK TN7110 ....................E53
3607672 ..... NR2M050L TN7110 .......................E68
3607673 ..... NTF2R TN6010 ..............................F16
3607674 ..... NT2LK TN6010 ..............................F13
3607675 ..... NT2L TN6010 ................................F14
3607676 ..... NT4R TN6010 ................................F14
3607677 ..... NTP2R TN6010 ..............................F15
3607678 ..... NTP2L TN6010 ..............................F15
3607684 ..... NR2M100L TN7110 .......................E68
3607689 ..... NR3M125L TN7110 .......................E69
3607691 ..... NR3M175L TN7110 .......................E69
3607823 ..... NTP3R TN6025 ..............................F15
3607824 ..... NT3RK TN6025 ..............................F13
3607825 ..... NT3R TN6025 ................................F14
3607826 ..... NT3L TN6025 ................................F14
3607827 ..... NTK3R TN6025 ..............................F16
3607828 ..... NT3LK TN6025 ..............................F13
3607829 ..... NAS3L6 TN6025 ............................F22
3607830 ..... NTF3R TN6025 ..............................F16
3607831 ..... NTP3L TN6025 ..............................F15
3607832 ..... NTF3L TN6025 ...............................F16
3607833 ..... NT2LK TN6025 ..............................F13
3607834 ..... NT4R TN6025 ................................F14
3607835 ..... NT2L TN6025 ................................F14
3607836 ..... NTK2R TN6025 ..............................F16
3607837 ..... NT2RK TN6025 ..............................F13
3607838 ..... NT3RCK TN6025 ............................F15
3607839 ..... NTP4R TN6025 ..............................F15
3607840 ..... NTP2L TN6025 ..............................F15
3607841 ..... NTP2R TN6025 ..............................F15
3607842 ..... NA3L4 TN6025 ..............................F21
3607843 ..... NT2R TN6025 ................................F14
3607844 ..... NAS3L12 TN6025 ..........................F22
3607845 ..... NAS3L8 TN6025 ............................F22
3607846 ..... NT4RK TN6025 ..............................F13
3607847 ..... NA3L6 TN6025 ..............................F21
3607848 ..... NA3R4 TN6025 ..............................F21
3607849 ..... NT4L TN6025 ................................F14
3607850 ..... NJP3014R12 TN6025 ....................F18
3607851 ..... NA3R6 TN6025 ..............................F21
3607852 ..... NTF2R TN6025 ..............................F16
3607853 ..... NTK3L TN6025 ..............................F16
3607854 ..... NA3R8 TN6025 ..............................F21
3607855 ..... NA3L8 TN6025 ..............................F21
3607856 ..... NAS3R8 TN6025 ............................F22
3613695 ..... MS2072CG ........M31, M55, M62, M67
3613696 ..... MS2038CG ......J8, J24, J35, M6, M12,
M31, M36, M62, M67,
M85, M91, M96
3614289 ..... 206408........................................E126
3614290 ..... 206445........................................E122
3614291 ..... 206451........................................E122
3614292 ..... 206453........................................E122
3614344 ..... 206522............................... E124–125
3614650 ..... HNGJ0905ANSNGD TN6525 ........ H28,
H34, H40
3615303 ..... 206424........................................E123
3615305 ..... 206440........................................E125
3615306 ..... 206443........................................E127
3615308 ..... 206449........................................E122
3615309 ..... 206456........................................E122
3632138 ..... NSL162C W ...................................F25
3632145 ..... NSL122B W ...................................F25
3632147 ..... NSR062 W .....................................F24
3632152 ..... NSL123A W ...................................F25
3632161 ..... NSL062 W......................................F25
3634282 ..... WMTAR2525M316-070-100 .........E34
3634283 ..... WMTAL2525M316-070-100 .........E34
3634284 ..... WMTAR2525M319-100-205 .........E34
3634285 ..... WMTAL2525M319-100-205 .........E34
3634290 ..... WMTAR2525M619-070-100 .........E34
3636536 ..... NSR2525M3 W ......................E74, F24
3636539 ..... NSL2525M3 W ......................E74, F25
3636540 ..... NSR2525M4 W ......................E74, F24
3636541 ..... NER2525M3 W ......................E76, F27
3636542 ..... NSR1616H2 W .......................E74, F24
3636543 ..... NEL2525M3 W .......................E76, F27
3636544 ..... NSL2525M4 W ......................E74, F25
3636545 ..... NSL1616H2 W .......................E74, F25
3636548 ..... NDC88VR75M TN6010 ..................F19
3636549 ..... NTC3R12E TN6010 ........................F17
3636550 ..... NDC3115VR75 TN6010 .................F18
3636551 ..... NT1L TN6010 ................................F13
3636552 ..... NDC8115VR75M TN6010 ..............F19
3636553 ..... NTC3R16E TN6010 ........................F17
3636554 ..... NTC3R14E TN6010 ........................F17
3636555 ..... NT1L TN6025 ................................F13
3636556 ..... NTC3L12I TN6025 .........................F17
3636557 ..... NTC3R16E TN6025 ........................F17
3636558 ..... NDC38RDR75 TN6025 ...................F20
3636559 ..... NDC38RDL75 TN6025 ...................F20
3636560 ..... NA4L4 TN6025 ..............................F21
3636561 ..... NA6L3 TN6025 ..............................F21
3636562 ..... NTC3R12E TN6025 ........................F17
3636563 ..... NTB3LB TN6025 ............................F22
3636564 ..... NA6R3 TN6025 ..............................F21
3636565 ..... NDC310RDL75 TN6025 .................F20
3636566 ..... NA4R4 TN6025 ..............................F21
3636567 ..... NA6R2 TN6025 ..............................F21
3636568 ..... NA6L2 TN6025 ..............................F21
3636569 ..... NG1062L TN6025 ..........................E52
3636570 ..... NG1094L TN6025 ..........................E52
3636571 ..... NG1047L TN6025 ..........................E52
3636572 ..... NG5M500L TN6025 .......................E52
3637485 ..... NSL082V W....................................F25
3637496 ..... NSR853D W ...................................F24
3637506 ..... NSR243D W ...................................F24
3637508 ..... NSL853D W ...................................F25
3637509 ..... NSR205D W ...................................F24
3637510 ..... NSL102B W ...................................F25
3637515 ..... NSL243D W ...................................F25
3637535 ..... NSR243E W ...................................F24
3637536 ..... NSL205D W ...................................F25
3637540 ..... NSR245D W ...................................F24
3637548 ..... NSL243E W ....................................F25
3637636 ..... D40MTTB560KM40 ...................... C84
3637637 ..... D50MTTB737KM40 ...................... C84
3637638 ..... D60MTTB1000KM40 .................... C84
3638588 ..... NSR2020K3 W .......................E74, F24
3638589 ..... NSR2020K2 W .......................E74, F24
3638590 ..... NSR2525M2 W ......................E74, F24
3638591 ..... NSR163D W ...................................F24
3638592 ..... NSR163C W ...................................F24
3639023 ..... NSR123B W ...................................F24
3639024 ..... NSL163D W ...................................F25
3639025 ..... NSR162C W ...................................F24
3639026 ..... NSR122B W ...................................F24
3639027 ..... NSR123A W ...................................F24
3639028 ..... NSR203D W ...................................F24
3639029 ..... NSL163C W ...................................F25
3639032 ..... NSL123B W ...................................F25
3639035 ..... NSR082V W ...................................F24
3639037 ..... NSL203D W ...................................F25
3639044 ..... NSR102B W ...................................F24
3639045 ..... NSL2020K2 W .......................E74, F25
3639046 ..... NSL2020K3 W .......................E74, F25
3639047 ..... NSL2525M2 W ......................E74, F25
3639048 ..... NASR1616K3Q W ..................E75, F26
3639112 ..... TCMT16T304MU TN7115 ............. B83
3639137 ..... DNMM15060865 TN7115 ............ B62
3639203 ..... CCMT090308MU TN7115 ............. B33
3639293 ..... SNMM19061665 TN7115 ............. B76
3639354 ..... DNMM15061265 TN7115 ............ B62
3639360 ..... CNMM12041265 TN7115............. B44
3640161 ..... SCMT090304 TN7115 .................. B68
3641112 ..... 471706002LW TIALN-LW ................ O7
3641113 ..... 471708003LW TIALN-LW ................ O7
3641114 ..... 471710004LW TIALN-LW ................ O7
3641115 ..... 471712005LW TIALN-LW ................ O7
3641116 ..... 471716006LW TIALN-LW ................ O7
3641117 ..... 471720007LW TIALN-LW ................ O7
3641118 ..... 472712005LW TIALN-LW ................ O8
3641119 ..... 472716006LW TIALN-LW ................ O8
3641120 ..... 472720007LW TIALN-LW ................ O8
3641622 ..... A25RNNTOR3 W ....................E78, F31
3641643 ..... A16MNNTOR2 W....................E78, F31
3641644 ..... A12MNNTOR2 W....................E78, F31
3641645 ..... A20QNNTOR2 W ....................E78, F31
3641646 ..... A32SNNTOR3 W ....................E78, F31
3641647 ..... A12MNNTOR1 W....................E79, F32
3641648 ..... A10KNNTOR1 W ....................E79, F32
3641649 ..... A16MNNTOL2 W ....................E78, F31
Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 24 11/2/15 10:33 AM
LViWID M 16 I d Z002 Z145 M i REBRANDO b 28 20153 09PM
Z25
widia.com
Index by Order Number
Order No. Catalogue No. Page(s)
3641650 ..... A25RNNTOL3 W .....................E78, F31
3641651 ..... A25RNNTOR2 W ....................E78, F31
3641652 ..... A20QNNTOL2 W ....................E78, F31
3641653 ..... A40TNNTOR3 W .....................E78, F31
3641654 ..... A40TNNTOR4 W .....................E78, F31
3641655 ..... A12MNNTOL2 W ....................E78, F31
3641656 ..... A32SNNTOL3 W .....................E78, F31
3641657 ..... A25RNNTOL2 W .....................E78, F31
3641658 ..... NER2020K2 W .......................E76, F27
3641659 ..... A40TNNTOL3 W .....................E78, F31
3641660 ..... NSR1212F2 W .......................E74, F24
3641661 ..... A50UNNTOR4 W ....................E78, F31
3641662 ..... NASR1212M2Q W..................E75, F26
3641663 ..... A40TNNTOL4 W .....................E78, F31
3641664 ..... NSR3225P3 W .......................E74, F24
3641665 ..... NER2525M2 W ......................E76, F27
3641666 ..... NSR3232P3 W .......................E74, F24
3641667 ..... NASR1010M2Q W..................E75, F26
3641668 ..... NEL2525M4 W .......................E76, F27
3641669 ..... NSR3232P4 W .......................E74, F24
3641670 ..... NSL3225P3 W .......................E74, F25
3641671 ..... NSL3232P3 W .......................E74, F25
3641672 ..... NER2525M4 W ......................E76, F27
3641674 ..... NER1616H2 W .......................E76, F27
3641675 ..... NSR3225P4 W .......................E74, F24
3641676 ..... NEL2525M2 W .......................E76, F27
3641677 ..... NEL2020K2 W........................E76, F27
3641678 ..... NSL3225P4 W .......................E74, F25
3641679 ..... NSL3232P4 W .......................E74, F25
3641680 ..... NER3225P3 W .......................E76, F27
3641681 ..... NSL1212F2 W ........................E74, F25
3641682 ..... NSR1010E2 W .......................E74, F24
3641683 ..... NSL1010E2 W........................E74, F25
3641684 ..... NEL1616H2 W .......................E76, F27
3641685 ..... NEL3225P3 W........................E76, F27
3641686 ..... NASL1212M2Q W ..................E75, F26
3641687 ..... NASL1616K3Q W ...................E75, F26
3641688 ..... NSL3232P5 W .......................E74, F25
3641689 ..... NER3225P4 W .......................E76, F27
3641690 ..... A50UNNTOL4 W .....................E78, F31
3641691 ..... NASL1010M2Q W ..................E75, F26
3641692 ..... NER3232P5 W .......................E76, F27
3641693 ..... NER3232P4 W .......................E76, F27
3641694 ..... NEL3225P4 W........................E76, F27
3641695 ..... NEL3232P5 W........................E76, F27
3641696 ..... NEL3232P4 W........................E76, F27
3642134 ..... D80MTTB1120KM63 .................... C84
3642135 ..... D100MTTB1330KM63 .................. C84
3644074 ..... MP094281L CG5 .......................... D82
3650456 ..... WMTSR1616K216 WG ...................E30
3650457 ..... WMTSL1616K216 WG ...................E31
3650458 ..... WMTSR2020K216 WG ...................E30
3650459 ..... WMTSL2020K216 WG ...................E31
3650460 ..... WMTSR1616K311 WG ...................E30
3650461 ..... WMTSL1616K311 WG ...................E31
3650462 ..... WMTSR1616K322 WG ...................E30
3650463 ..... WMTSL1616K322 WG ...................E31
3650464 ..... WMTSR1616K422 WG ...................E30
3650465 ..... WMTSL1616K422 WG ...................E31
3650466 ..... WMTSR1616K514 WG ...................E30
3650467 ..... WMTSL1616K514 WG ...................E31
3650468 ..... WMTSR2020K311 WG ...................E30
3650469 ..... WMTSL2020K311 WG ...................E31
3650470 ..... WMTSR2020K322 WG ...................E30
3650471 ..... WMTSL2020K322 WG ...................E31
3650472 ..... WMTSL2020K22 W........................E31
3650473 ..... WMTSR2020K514 WG ...................E30
3650474 ..... WMTSL2020K514 WG ...................E31
3650475 ..... WMTSR2020L525 WG ...................E30
3650477 ..... WMTSR2020L614 WG ...................E30
3650478 ..... WMTSL2020L614 WG ...................E31
3650479 ..... WMTSR2525M311 WG ..................E30
3650480 ..... WMTSL2525M311 WG ..................E31
3650481 ..... WMTSR2525M322 WG ..................E30
3650482 ..... WMTSL2525M322 WG ..................E31
3650483 ..... WMTSR2525M422 WG ..................E30
3650484 ..... WMTSL2525M422 WG ..................E31
3650485 ..... WMTSR2525M514 WG ..................E30
3650486 ..... WMTSL2525M514 WG ..................E31
3650487 ..... WMTSR2525M525 WG ..................E30
3650488 ..... WMTSL2525M525 WG ..................E31
3650489 ..... WMTSR2525M614 WG ..................E30
3650490 ..... WMTSL2525M614 WG ..................E31
3650491 ..... WMTSR2525M625 WG ..................E30
3650493 ..... WMTSL2525M625 WG ..................E31
3650494 ..... WMTSR2525M814 WG ..................E30
3650495 ..... WMTSL2525M814.........................E31
3650496 ..... WMTSR2525M825 WG ..................E30
3650497 ..... WMTSL2525M825 WG ..................E31
3650498 ..... WMTSR3232M814 WG ..................E30
3650499 ..... WMTSL3232M814 WG ..................E31
3650500 ..... WMTSR3232M825 WG ..................E30
3650501 ..... WMTSL3232M825 WG ..................E31
3650502 ..... WMTSR1616411 WG .....................E30
3650504 ..... WMTSR2020K411 WG ...................E30
3650505 ..... WMTSL2020K411 WG ...................E31
3650506 ..... WMTSR2525M216 WG ..................E30
3650507 ..... WMTSL2525M216 WG ..................E31
3650508 ..... WMTCR1010H110 WG ..................E32
3650509 ..... WMTCL1010H110 WG ...................E32
3650510 ..... WMTCR1212H110 WG ..................E32
3650511 ..... WMTCL1212H110 WG ...................E32
3650512 ..... WMTCR1616K113 WG ...................E32
3650513 ..... WMTCL1616K113 WG ...................E32
3650514 ..... WMTCR2020K113 WG ...................E32
3650515 ..... WMTCL2020K113 WG ...................E32
3650516 ..... WMTSR2525M116 WG ..................E30
3650535 ..... M1200D063Z04HN09 .................. H31
3650536 ..... M1200D080Z05HN09 .................. H31
3650537 ..... M1200D100Z06HN09 .................. H31
3650538 ..... M1200D125Z08HN09 .................. H31
3653332 ..... WMTSL2525M116 WG ..................E31
3653413 ..... WMTCR1010H210 WG ..................E32
3653414 ..... WMTCL1010H210 WG ...................E32
3653415 ..... WMTCR1212H210 WG ..................E32
3653416 ..... WMTCL1212H210 WG ...................E32
3653417 ..... WMTCR1616K213 WG ...................E32
3653418 ..... WMTCL1616K213 WG ...................E32
3653419 ..... WMTCR2020K213 WG ...................E32
3653420 ..... WMTCL2020K213 WG ...................E32
3653421 ..... WMTBR2525M313-038-052 WG ...E33
3653422 ..... WMTBL2525M313-038-052 WG ...E33
3653423 ..... WMTBR2525M316-052-070 WG ...E33
3653424 ..... WMTBL2525M316-052-070 WG ...E33
3653425 ..... WMTBR2525M316-070-100 WG ...E33
3653426 ..... WMTBL2525M316-070-100 WG ...E33
3653427 ..... WMTBR2525M319-100-205 WG ...E33
3653428 ..... WMTBL2525M319-100-205 WG ...E33
3653431 ..... WMTBR2525M519-052-070 WG ...E33
3653432 ..... WMTBL2525M519-052-070 WG ...E33
3653433 ..... WMTBR2525M519-070-100 WG ...E33
3653434 ..... WMTBL2525M519-070-100 WG ...E33
3653435 ..... WMTBR2525M525-100-205 WG ...E33
3653436 ..... WMTBL2525M525-100-205 WG ...E33
3653437 ..... WMTBR2525M616-038-052 WG ...E33
3653438 ..... WMTBL2525M616-038-052 WG ...E33
3653441 ..... WMTBR2525M619-070-100 WG ...E33
3653443 ..... WMTBR2525M625-100-205 WG ...E33
3653444 ..... WMTBL2525M625-100-205 WG ...E33
3653751 ..... WMTSR2020K20 W .......................E30
3653752 ..... WMTSR2525M11 W ......................E30
3653763 ..... WMTSL2525M11 W .......................E31
3653764 ..... WMTBR2525M412-032-052 W .....E33
3653765 ..... WMTBL2525M412-032-052 W .....E33
3653766 ..... WMTBR2525M415-052-070 W .....E33
3653767 ..... WMTBL2525M415-052-070 W .....E33
3653769 ..... WMTBL2525M415-070-100 W .....E33
3653770 ..... WMTBR2525M418-100-205 W .....E33
3653771 ..... WMTBL2525M418-100-205 W .....E33
3657756 ..... 423003-000040 K30F-DCHP ..........P5
3657757 ..... 423003-000060 K30F-DCHP ..........P5
3657758 ..... 423003-000080 K30F-DCHP ..........P5
3657759 ..... 423003-000100 K30F-DCHP ..........P5
3657760 ..... 423003-000120 K30F-DCHP ..........P5
3657761 ..... 423004-000040 K30F-DCHP ..........P5
3657762 ..... 423004-000060 K30F-DCHP ..........P5
3657763 ..... 423004-000080 K30F-DCHP ..........P5
3657764 ..... 423004-000100 K30F-DCHP ..........P5
3657765 ..... 423004-000120 K30F-DCHP ..........P5
3660590 ..... CM214.................................... C40–41
3660591 ..... CM219.................................... C40–41
3660592 ..... CM216.................................... C40–41
3662835 ..... CNMM190624SR TN7115 ............ B44
3665122 ..... 7N2100501RT TIALN-RT1 ........... O166
3665140 ..... 7N2100601RT TIALN-RT1 ........... O166
3665141 ..... 7N2100801RT TIALN-RT1 ........... O166
3665142 ..... 7N2101001RT TIALN-RT1 ........... O166
3665163 ..... 7N2101201RT TIALN-RT1 ........... O166
3665164 ..... 7N2101501RT TIALN-RT1 ........... O166
3665166 ..... 7N2102001RT TIALN-RT1 ........... O166
3665167 ..... 7N2102501RT TIALN-RT1 ........... O166
3665168 ..... 7N2103001RT TIALN-RT1 ........... O166
3669071 ..... NST1 .......................................C40–41
3669072 ..... NST2 .......................................C40–41
3669183 ..... NST3 .......................................C40–41
3669653 ..... 619168..........................................E35
3670842 ..... HNPJ0905ANSNHD TN6540......... H28,
H34, H40
3670864 ..... HNPJ0905ANSNHD TN6520......... H28,
H34, H40
3670865 ..... HNPJ090543ANSNHD TN6540 .... H28,
H34, H40
3670866 ..... HNPJ090543ANSNHD TN6520 .... H28,
H34, H40
3684608 ..... CCMT09T312 TN7125 .................. B30
3684633 ..... CNMM16061265 TN7125............. B44
3745400 ..... 71N606002MT ALTIN-MT1 .........O152
3745401 ..... 71N608003MT ALTIN-MT1 .........O152
3745402 ..... 71N610004MT ALTIN-MT1 .........O152
3745413 ..... 71N612005MT ALTIN-MT1 .........O152
3745833 ..... CNMM19061265 TN7125............. B44
3745847 ..... SNMM19061265 TN7125 ............. B76
3745851 ..... CNMM16060865 TN7125............. B44
3745855 ..... SNMM12040865 TN7125 ............. B76
3750370 ..... M1200HF050Z04HN09 ................. H26
3750372 ..... M1200HF063Z05HN09 ................. H26
3750434 ..... M1200HF080Z06HN09 ................. H26
3750435 ..... M1200HF100Z08HN09 ................. H26
3750436 ..... M1200HF125Z09HN09 ................. H26
3758942 ..... CSPM81232225R WG ................... D25
3759184 ..... GCPM122545R WG ...................... D27
3761185 ..... HNPJ0905ANSNGD TN6520 ........ H27,
H34, H40
3761187 ..... HNPJ0905ANSNGD TN6540 ........ H27,
H34, H40
3761188 ..... HNPJ0905ANSNGD TN7535 ........ H27,
H34, H40
3780360 ..... MS-2071 ................................ J32–35
3782377 ..... GCPM102545L WG ....................... D27
3782378 ..... QCBMW102543R WG ................... D24
3786518 ..... FCBM6616635R WG ..................... D17
3786519 ..... FCBM8216795R WG ..................... D17
3790247 ..... FCBM6616325R WG ..................... D17
3795071 ..... DCMT11T304MU TN5105 ............. B49
3795073 ..... DCMT150408MU TN5105 ............. B49
3795074 ..... DCMT150412MU TN5105 ............. B49
3795085 ..... TCMT16T308MU TN5105 ............. B83
3811638 ..... NWC3R14E TN6025 .......................F19
3811639 ..... NWC3R11E TN6025 .......................F19
3848984 ..... TDM0800UPM WU25PD ................ U10
3848985 ..... TDM0810UPM WU25PD ................ U10
3848986 ..... TDM0830UPM WU25PD ................ U10
3848987 ..... TDM0840UPM WU25PD ................ U10
3848988 ..... TDM0850UPM WU25PD ................ U10
3848989 ..... TDM0860UPM WU25PD ................ U10
3848990 ..... TDM0870UPM WU25PD ................ U10
3848991 ..... TDM0880UPM WU25PD ................ U10
3848992 ..... TDM0890UPM WU25PD ................ U10
3849043 ..... TDM0900UPM WU25PD ................ U10
3849044 ..... TDM0910UPM WU25PD ................ U10
3849045 ..... TDM0920UPM WU25PD ................ U10
3849046 ..... TDM0930UPM WU25PD ................ U10
3849047 ..... TDM0940UPM WU25PD ................ U11
3849048 ..... TDM0950UPM WU25PD ................ U11
3849049 ..... TDM0960UPM WU25PD ................ U11
3849050 ..... TDM0990UPM WU25PD ................ U11
3849051 ..... TDM1000UPM WU25PD ................ U11
3849052 ..... TDM1010UPM WU25PD ................ U11
3849053 ..... TDM1020UPM WU25PD ................ U11
3849054 ..... TDM1030UPM WU25PD ................ U11
3849055 ..... TDM1040UPM WU25PD ................ U11
3849056 ..... TDM1050UPM WU25PD ................ U11
3849057 ..... TDM1060UPM WU25PD ................ U11
3849058 ..... TDM1070UPM WU25PD ................ U11
3849059 ..... TDM1080UPM WU25PD ................ U11
3849060 ..... TDM1090UPM WU25PD ................ U11
3849061 ..... TDM1100UPM WU25PD ................ U11
3849062 ..... TDM1110UPM WU25PD ................ U11
3849063 ..... TDM1120UPM WU25PD ................ U11
3849064 ..... TDM1130UPM WU25PD ................ U11
3849065 ..... TDM1140UPM WU25PD ................ U11
3849066 ..... TDM1150UPM WU25PD ................ U11
3849067 ..... TDM1160UPM WU25PD ................ U11
3849068 ..... TDM1170UPM WU25PD ................ U11
3849069 ..... TDM1180UPM WU25PD ................ U11
3849070 ..... TDM1190UPM WU25PD ................ U11
3849071 ..... TDM1200UPM WU25PD ................ U12
3849072 ..... TDM1210UPM WU25PD ................ U12
3849073 ..... TDM1220UPM WU25PD ................ U12
3849074 ..... TDM1240UPM WU25PD ................ U12
3849075 ..... TDM1250UPM WU25PD ................ U12
3849076 ..... TDM1260UPM WU25PD ................ U12
3849077 ..... TDM1280UPM WU25PD ................ U12
3849078 ..... TDM1300UPM WU25PD ................ U12
Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 25 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRAND O b 28 2015 3 09 PM
Z26 widia.com
Index by Order Number
Order No. Catalogue No. Page(s)
3849079 ..... TDM1320UPM WU25PD ................ U12
3849080 ..... TDM1330UPM WU25PD ................ U12
3849081 ..... TDM1340UPM WU25PD ................ U12
3849082 ..... TDM1350UPM WU25PD ................ U12
3849083 ..... TDM1360UPM WU25PD ................ U12
3849084 ..... TDM1370UPM WU25PD ................ U12
3849085 ..... TDM1380UPM WU25PD ................ U12
3849086 ..... TDM1400UPM WU25PD ................ U12
3849087 ..... TDM1410UPM WU25PD ................ U12
3849088 ..... TDM1420UPM WU25PD ................ U12
3849089 ..... TDM1430UPM WU25PD ................ U12
3849090 ..... TDM1440UPM WU25PD ................ U12
3849091 ..... TDM1450UPM WU25PD ................ U12
3849092 ..... TDM1460UPM WU25PD ................ U12
3849093 ..... TDM1470UPM WU25PD ................ U12
3849094 ..... TDM1480UPM WU25PD ................ U12
3849095 ..... TDM1490UPM WU25PD ................ U12
3849096 ..... TDM1500UPM WU25PD ................ U12
3849097 ..... TDM1510UPM WU25PD ................ U12
3849098 ..... TDM1520UPM WU25PD ................ U12
3849099 ..... TDM1530UPM WU25PD ................ U13
3849100 ..... TDM1540UPM WU25PD ................ U13
3849101 ..... TDM1550UPM WU25PD ................ U13
3849102 ..... TDM1560UPM WU25PD ................ U13
3849103 ..... TDM1570UPM WU25PD ................ U13
3849104 ..... TDM1580UPM WU25PD ................ U13
3849105 ..... TDM1600UPM WU25PD ................ U13
3849106 ..... TDM1610UPM WU25PD ................ U13
3849107 ..... TDM1620UPM WU25PD ................ U13
3849108 ..... TDM1630UPM WU25PD ................ U13
3849109 ..... TDM1640UPM WU25PD ................ U13
3849110 ..... TDM1650UPM WU25PD ................ U13
3849111 ..... TDM1660UPM WU25PD ................ U13
3849112 ..... TDM1670UPM WU25PD ................ U13
3849113 ..... TDM1680UPM WU25PD ................ U13
3849114 ..... TDM1690UPM WU25PD ................ U13
3849119 ..... TDM1700UPM WU25PD ................ U13
3849120 ..... TDM1710UPM WU25PD ................ U13
3849121 ..... TDM1720UPM WU25PD ................ U13
3849122 ..... TDM1730UPM WU25PD ................ U13
3849193 ..... TDM1740UPM WU25PD ................ U13
3849194 ..... TDM1750UPM WU25PD ................ U13
3849195 ..... TDM1760UPM WU25PD ................ U13
3849196 ..... TDM1770UPM WU25PD ................ U13
3849197 ..... TDM1780UPM WU25PD ................ U13
3849198 ..... TDM1790UPM WU25PD ................ U13
3849199 ..... TDM1800UPM WU25PD ................ U13
3849200 ..... TDM1810UPM WU25PD ................ U13
3849201 ..... TDM1820UPM WU25PD ................ U13
3849202 ..... TDM1830UPM WU25PD ................ U14
3849203 ..... TDM1840UPM WU25PD ................ U14
3849204 ..... TDM1850UPM WU25PD ................ U14
3849205 ..... TDM1860UPM WU25PD ................ U14
3849206 ..... TDM1870UPM WU25PD ................ U14
3849207 ..... TDM1880UPM WU25PD ................ U14
3849208 ..... TDM1890UPM WU25PD ................ U14
3849209 ..... TDM1900UPM WU25PD ................ U14
3849210 ..... TDM1910UPM WU25PD ................ U14
3849211 ..... TDM1920UPM WU25PD ................ U14
3849212 ..... TDM1930UPM WU25PD ................ U14
3849213 ..... TDM1940UPM WU25PD ................ U14
3849214 ..... TDM1950UPM WU25PD ................ U14
3849215 ..... TDM1960UPM WU25PD ................ U14
3849216 ..... TDM1970UPM WU25PD ................ U14
3849217 ..... TDM1980UPM WU25PD ................ U14
3849218 ..... TDM1990UPM WU25PD ................ U14
3849219 ..... TDM2000UPM WU25PD ................ U14
3849220 ..... TDM2010UPM WU25PD ................ U14
3849221 ..... TDM2020UPM WU25PD ................ U14
3849222 ..... TDM2030UPM WU25PD ................ U14
3849223 ..... TDM2040UPM WU25PD ................ U14
3849224 ..... TDM2050UPM WU25PD ................ U14
3849225 ..... TDM2060UPM WU25PD ................ U14
3849226 ..... TDM2070UPM WU25PD ................ U14
3849227 ..... TDM2080UPM WU25PD ................ U14
3849228 ..... TDM2090UPM WU25PD ................ U14
3849229 ..... TDM2099UPM WU25PD ................ U14
3850904 ..... TDM080R3SCF12M WG .................. U6
3850905 ..... TDM080R5SCF12M WG .................. U7
3850906 ..... TDM085R3SCF12M WG .................. U6
3850907 ..... TDM085R5SCF12M WG .................. U7
3850908 ..... TDM090R3SCF12M WG .................. U6
3850909 ..... TDM090R5SCF12M WG .................. U7
3850910 ..... TDM095R3SCF12M WG .................. U6
3850911 ..... TDM095R5SCF12M WG .................. U7
3850912 ..... TDM100R3SCF16M WG .................. U6
3850923 ..... TDM100R5SCF16M WG .................. U7
3850924 ..... TDM105R3SCF16M WG .................. U6
3850925 ..... TDM105R5SCF16M WG .................. U7
3850926 ..... TDM110R3SCF16M WG .................. U6
3850927 ..... TDM110R5SCF16M WG .................. U7
3850928 ..... TDM115R3SCF16M WG .................. U6
3850929 ..... TDM115R5SCF16M WG .................. U7
3850930 ..... TDM120R3SCF16M WG .................. U6
3850931 ..... TDM120R5SCF16M WG .................. U7
3850932 ..... TDM125R3SCF16M WG .................. U6
3850933 ..... TDM125R5SCF16M WG .................. U7
3850934 ..... TDM130R3SCF16M WG .................. U6
3850935 ..... TDM130R5SCF16M WG .................. U7
3850936 ..... TDM135R3SCF16M WG .................. U6
3850937 ..... TDM135R5SCF16M WG .................. U7
3850938 ..... TDM140R3SCF16M WG .................. U6
3850939 ..... TDM140R5SCF16M WG .................. U7
3850940 ..... TDM145R3SCF16M WG .................. U6
3850941 ..... TDM145R5SCF16M WG .................. U7
3850942 ..... TDM150R3SCF20M WG .................. U6
3850943 ..... TDM150R5SCF20M WG .................. U7
3850944 ..... TDM160R3SCF20M WG .................. U6
3850945 ..... TDM160R5SCF20M WG .................. U7
3850946 ..... TDM170R3SCF20M WG .................. U6
3850947 ..... TDM170R5SCF20M WG .................. U7
3850948 ..... TDM180R3SCF25M WG .................. U6
3850949 ..... TDM180R5SCF25M WG .................. U7
3850950 ..... TDM190R3SCF25M WG .................. U6
3850951 ..... TDM190R5SCF25M WG .................. U7
3850952 ..... TDM200R3SCF25M WG .................. U6
3850953 ..... TDM200R5SCF25M WG .................. U7
3850959 ..... TDM0794UPM WU25PD ................ U10
3850960 ..... TDM0816UPM WU25PD ................ U10
3850961 ..... TDM0820UPM WU25PD ................ U10
3850962 ..... TDM0833UPM WU25PD ................ U10
3850963 ..... TDM0843UPM WU25PD ................ U10
3850964 ..... TDM0861UPM WU25PD ................ U10
3850965 ..... TDM0873UPM WU25PD ................ U10
3850966 ..... TDM0884UPM WU25PD ................ U10
3850967 ..... TDM0909UPM WU25PD ................ U10
3850968 ..... TDM0913UPM WU25PD ................ U10
3850969 ..... TDM0935UPM WU25PD ................ U10
3850970 ..... TDM0953UPM WU25PD ................ U11
3850971 ..... TDM0956UPM WU25PD ................ U11
3850972 ..... TDM0958UPM WU25PD ................ U11
3850973 ..... TDM0970UPM WU25PD ................ U11
3850974 ..... TDM0980UPM WU25PD ................ U11
3850975 ..... TDM0992UPM WU25PD ................ U11
3850976 ..... TDM1002UPM WU25PD ................ U11
3850977 ..... TDM1008UPM WU25PD ................ U11
3850978 ..... TDM1026UPM WU25PD ................ U11
3850979 ..... TDM1032UPM WU25PD ................ U11
3850980 ..... TDM1049UPM WU25PD ................ U11
3850981 ..... TDM1072UPM WU25PD ................ U11
3850982 ..... TDM1111UPM WU25PD ................ U11
3850983 ..... TDM1151UPM WU25PD ................ U11
3850984 ..... TDM1161UPM WU25PD ................ U11
3850985 ..... TDM1191UPM WU25PD ................ U11
3850986 ..... TDM1230UPM WU25PD ................ U12
3850987 ..... TDM1247UPM WU25PD ................ U12
3850988 ..... TDM1270UPM WU25PD ................ U12
3850989 ..... TDM1290UPM WU25PD ................ U12
3850990 ..... TDM1310UPM WU25PD ................ U12
3850991 ..... TDM1349UPM WU25PD ................ U12
3850992 ..... TDM1389UPM WU25PD ................ U12
3850993 ..... TDM1390UPM WU25PD ................ U12
3850994 ..... TDM1429UPM WU25PD ................ U12
3850995 ..... TDM1467UPM WU25PD ................ U12
3850996 ..... TDM1468UPM WU25PD ................ U12
3850997 ..... TDM1508UPM WU25PD ................ U12
3850998 ..... TDM1548UPM WU25PD ................ U13
3850999 ..... TDM1588UPM WU25PD ................ U13
3851000 ..... TDM1603UPM WU25PD ................ U13
3851001 ..... TDM1608UPM WU25PD ................ U13
3851002 ..... TDM1627UPM WU25PD ................ U13
3851003 ..... TDM1667UPM WU25PD ................ U13
3851004 ..... TDM1687UPM WU25PD ................ U13
3851005 ..... TDM1707UPM WU25PD ................ U13
3851006 ..... TDM1746UPM WU25PD ................ U13
3851007 ..... TDM1786UPM WU25PD ................ U13
3851008 ..... TDM1826UPM WU25PD ................ U14
3851009 ..... TDM1865UPM WU25PD ................ U14
3851010 ..... TDM1905UPM WU25PD ................ U14
3851011 ..... TDM1923UPM WU25PD ................ U14
3851012 ..... TDM1925UPM WU25PD ................ U14
3851013 ..... TDM1928UPM WU25PD ................ U14
3851014 ..... TDM1935UPM WU25PD ................ U14
3851015 ..... TDM1945UPM WU25PD ................ U14
3851016 ..... TDM1984UPM WU25PD ................ U14
3851017 ..... TDM2024UPM WU25PD ................ U14
3851018 ..... TDM2064UPM WU25PD ................ U14
3854445 ..... QCBM102540R WG ...................... D20
3855796 ..... CM234R ASSY ................. C8–16, C19,
C56–59
3857732 ..... MB094281R CM1 ......................... D79
3860419 ..... RFX320RFX185030M WG ............ W66
3860420 ..... RFX320RFX245040M WG ............ W66
3860421 ..... RFX420RFX185035M WG ............ W66
3860422 ..... RFX420RFX245045M WG ............ W66
3860443 ..... RFX420RFX320045M WG ............ W66
3860444 ..... RFX550RFX185040M WG ............ W66
3860445 ..... RFX550RFX245050M WG ............ W66
3860446 ..... RFX550RFX320050M WG ............ W66
3860447 ..... RFX550RFX420055M WG ............ W66
3860448 ..... RFX720RFX420060M WG ............ W66
3860449 ..... RFX720RFX550060M WG ............ W66
3860450 ..... RFX185RFX185030M WG ............ W65
3860451 ..... RFX245RFX245035M WG ............ W65
3860452 ..... RFX320RFX320050M WG ............ W65
3860473 ..... RFX420RFX420060M WG ............ W65
3860474 ..... RFX550RFX550090M WG ............ W65
3860475 ..... RFX720RFX720100M WG ............ W65
3860547 ..... RFX550CS27030M WG ................ W64
3860548 ..... RFX720CS40035M WG ................ W64
3860549 ..... HSK63ARFX185060M WG ............ W62
3860550 ..... HSK63ARFX245060M WG ............ W62
3860551 ..... HSK63ARFX320060M WG ............ W62
3860552 ..... HSK63ARFX420070M WG ............ W62
3860623 ..... HSK63ARFX550080M WG ............ W62
3860624 ..... HSK63ARFX720095M WG ............ W62
3860676 ..... BT40BRFX185060M WG .............. W60
3860677 ..... BT40BRFX245060M WG .............. W60
3860678 ..... BT40BRFX320060M WG .............. W60
3860679 ..... BT40BRFX420060M WG .............. W60
3860680 ..... BT40BRFX550065M WG .............. W60
3860681 ..... BT50BRFX320060M WG .............. W61
3860682 ..... BT50BRFX420060M WG .............. W61
3860693 ..... BT50BRFX550065M WG .............. W61
3860694 ..... BT50BRFX720070M WG .............. W61
3860696 ..... DV40BRFX185060M WG .............. W58
3860697 ..... DV40BRFX245060M WG .............. W58
3860698 ..... DV40BRFX320060M WG .............. W58
3860699 ..... DV40BRFX420060M WG .............. W58
3860700 ..... DV40BRFX550065M WG .............. W58
3860701 ..... DV50BRFX320060M WG .............. W59
3860702 ..... DV50BRFX420060M WG .............. W59
3860853 ..... DV50BRFX550060M WG .............. W59
3860854 ..... DV50BRFX720065M WG .............. W59
3860896 ..... CV40BRFX185236 WG ................. W56
3860897 ..... CV40BRFX245236 WG ................. W56
3860898 ..... CV40BRFX320236 WG ................. W56
3860899 ..... CV40BRFX420236 WG ................. W56
3860900 ..... CV40BRFX550256 WG ................. W56
3860901 ..... CV50BRFX320236 WG ................. W57
3860902 ..... CV50BRFX420236 WG ................. W57
3860903 ..... CV50BRFX550236 WG ................. W57
3860904 ..... CV50BRFX720276 WG ................. W57
3860905 ..... SMAC200 WG .............................. W41
3860906 ..... RFX420FBHBB006022 WG........... W49
3860907 ..... KM40TSFBHBB006022 WG.......... W50
3860908 ..... MASCFCR09CA06F WG ............... W46
3860909 ..... MASCLCR09CA06F WG ............... W47
3860910 ..... MASTFCR09CA11F WG ................ W48
3861123 ..... KM32TSFBH022029 WG .............. W53
3861124 ..... KM32TSFBH029038 WG .............. W53
3861125 ..... KM32TSFBH038050 WG .............. W53
3861126 ..... KM40TSFBH029038 WG .............. W53
3861127 ..... KM40TSFBH038050 WG .............. W53
3861128 ..... KM40TSFBH050065 WG .............. W53
3861129 ..... KM50TSFBH050065 WG .............. W53
3861130 ..... KM50TSFBH065088 WG .............. W53
3861131 ..... KM63TSFBH065088 WG .............. W53
3861132 ..... KM63TSFBH088115 WG .............. W53
3861143 ..... RFX185FBH022029 WG ............... W52
3861144 ..... RFX245FBH029038 WG ............... W52
3861145 ..... RFX320FBH038050 WG ............... W52
3861146 ..... RFX420FBH050065 WG ............... W52
3861147 ..... RFX550FBH065088 WG ............... W52
3861148 ..... RFX720FBH088115 WG ............... W52
3861149 ..... KM32TSTCHS022030 WG ............ W37
3861150 ..... KM32TSTCHS030039 WG ............ W37
3861151 ..... KM32TSTCHS039050 WG ............ W37
3861152 ..... KM40TSTCHS030039 WG ............ W37
3861173 ..... KM40TSTCHS039050 WG ............ W37
3861174 ..... KM40TSTCHS050067 WG ............ W37
3861175 ..... KM50TSTCHS050067 WG ............ W37
3861176 ..... KM50TSTCHS067088 WG ............ W37
3861177 ..... KM63TSTCHS067088 WG ............ W37
Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 26 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRANDO b 28 20153 09PM
Z27
widia.com
Index by Order Number
Order No. Catalogue No. Page(s)
3861178 ..... KM63TSTCHS088115 WG ............ W37
3861179 ..... RFX185TCHS022030 WG ............. W36
3861180 ..... RFX245TCHS030039 WG ............. W36
3861181 ..... RFX320TCHS039050 WG ............. W36
3861182 ..... RFX420TCHS050067 WG ............. W36
3861183 ..... RFX550TCHS067088 WG ............. W36
3861184 ..... RFX720TCHS088115 WG ............. W36
3864461 ..... RFX185LS WG ............W56, W58, W60,
W62, W65–66
3864462 ..... RFX245LS WG ............W56, W58, W60,
W62, W65–66
3864643 ..... RFX320LS WG .........W56–62, W65–66
3864644 ..... RFX420LS WG .........W56–63, W65–66
3864645 ..... RFX550LS WG .........W56–63, W65–66
3864646 ..... RFX720LS WG .....................W57, W59,
W61–63, W65
3864647 ..... SMAC087 WG .............................. W39
3865358 ..... XNGJ0905ANFNLDJ3W THM-U ..... H35
3865373 ..... HNGJ0905ANFNLDJ TN6501 ....... H27,
H33, H39
3865375 ..... XNGJ0905ANFNLDJ3W TN6501 ... H35
3869578 ..... CNGN120408T01020 CW3020
........................................................................ B177
3869579 ..... CNGN120412T01020 CW3020
........................................................................ B177
3869580 ..... CNGN120416T01020 CW3020
........................................................................ B177
3869581 ..... CNGN120712T01020 CW3020
........................................................................ B177
3869582 ..... CNGN120716T01020 CW3020
........................................................................ B177
3869743 ..... DNGN150708T01020 CW3020
........................................................................ B180
3869745 ..... DNGN150716T01020 CW3020
........................................................................ B180
3869746 ..... RCGX060400T01020 CW3020 ... B183
3869747 ..... RCGX090700T01020 CW3020 ... B183
3869748 ..... RCGX120700T01020 CW3020 ... B183
3869749 ..... RNGN090300T01020 CW3020... B184
3869750 ..... RNGN120400T01020 CW3020... B184
3869751 ..... RNGN120700T01020 CW3020... B184
3869753 ..... RPGX060400T01020 CW3020 ... B185
3869754 ..... RPGX090700T01020 CW3020 ... B185
3869755 ..... RPGX120700T01020 CW3020 ... B185
3869756 ..... SNGN120412T01020 CW3020 ... B187
3869757 ..... SNGN120416T01020 CW3020 ... B187
3869758 ..... SNGN120712T01020 CW3020 ... B187
3869759 ..... SNGN120716T01020 CW3020 ... B188
3869761 ..... TNGN160408T01020 CW3020 ... B192
3870042 ..... CKJNL2525M16 WG ..................... C34
3870063 ..... CKJNL3225P16 WG ...................... C34
3870064 ..... CKJNR2525M16 WG ..................... C34
3870065 ..... CKJNR3225P16 WG ...................... C34
3870066 ..... CSBPL2020K12 WG ...................... C36
3870068 ..... CSBPR2020K12 WG ..................... C36
3870069 ..... CSBPR2525M12 WG..................... C36
3870070 ..... CSDPN1616H09 WG ..................... C36
3870071 ..... CSDPN2020K12 WG ..................... C36
3870072 ..... CSDPN2525M12 WG .................... C36
3870073 ..... CSSPL2525M12 WG ..................... C37
3870074 ..... CSSPR2020K12 WG ...................... C37
3870075 ..... CSSPR2525M12 WG ..................... C37
3870076 ..... CTCPN2510M11 WG .................... C37
3870077 ..... CTCPN2514M16 WG .................... C37
3870078 ..... CTCPN2518M22 WG .................... C37
3870079 ..... CTCPN2520M22 WG .................... C37
3870080 ..... CTCPN4018R22 WG ..................... C37
3870082 ..... CTDPL1212F11 WG ...................... C38
3870083 ..... CTDPR1212F11 WG ...................... C38
3870086 ..... CTFPL2525M16 WG ..................... C38
3870087 ..... CTFPR2020K16 WG ...................... C38
3870088 ..... CTFPR2525M16 WG ..................... C38
3870089 ..... CTGPL1212F11 WG ...................... C39
3870090 ..... CTGPL2020K16 WG ...................... C39
3870091 ..... CTGPL2525M16 WG ..................... C39
3870092 ..... CTGPR1212F11 WG ...................... C39
3870103 ..... CTGPR1616H11 WG ..................... C39
3870104 ..... CTGPR2020K11 WG ..................... C39
3870105 ..... CTGPR2020K16 WG ..................... C39
3870106 ..... CTGPR2525M16 WG..................... C39
3870107 ..... CTGPR2525M22 WG..................... C39
3870252 ..... STWPR12CA16 WG ..................... C129
3870305 ..... MSYNR25CA19 WG..................... C101
3870306 ..... MSYNR16CA12 WG..................... C101
3870307 ..... MSYNR12CA12 WG..................... C101
3870308 ..... MSYNR10CA09 WG..................... C101
3870309 ..... MSYNL10CA09 WG ..................... C101
3870310 ..... MSTNR16CA12 WG..................... C100
3870311 ..... MSTNR12CA12 WG..................... C100
3870312 ..... MSTNR10CA09 WG..................... C100
3870333 ..... MSSNR20CA15 WG ...................... C99
3870334 ..... MSSNR16CA12 WG ...................... C99
3870335 ..... MSSNR12CA12 WG ...................... C99
3870336 ..... MSSNR10CA09 WG ...................... C99
3870338 ..... MSSNL16CA12 WG ....................... C99
3870339 ..... MSSNL12CA12 WG ....................... C99
3870340 ..... MSSNL10CA09 WG ....................... C99
3870341 ..... MSRNR20CA15 WG ...................... C98
3870343 ..... MSRNR12CA12 WG ...................... C98
3870344 ..... MSRNR10CA09 WG ...................... C98
3870345 ..... MSRNL20CA15 WG ....................... C98
3870346 ..... MSRNL16CA12 WG ....................... C98
3870347 ..... MSRNL12CA12 WG ....................... C98
3870348 ..... MSKNR25CA19 WG ...................... C97
3870349 ..... MSKNR20CA15 WG ...................... C97
3870350 ..... MSKNR16CA12 WG ...................... C97
3870351 ..... MSKNR12CA12 WG ...................... C97
3870352 ..... MSKNR10CA09 WG ...................... C97
3870353 ..... MSKNL20CA15 WG ....................... C97
3870354 ..... MSKNL16CA12 WG ....................... C97
3870356 ..... MSKNL10CA09 WG ....................... C97
3870360 ..... MDQNR20CA15 WG ...................... C96
3870361 ..... MDQNR16CA15 WG ...................... C96
3870362 ..... MDQNL20CA15 WG ...................... C96
3870363 ..... STWPR10CA11 WG ..................... C129
3870364 ..... STWPR08CA09 WG ..................... C129
3870365 ..... STWPL12CA16 WG ..................... C129
3870366 ..... STWPL10CA11 WG ..................... C129
3870367 ..... STTPR12CA16 WG ...................... C128
3870368 ..... STTPR10CA11 WG ...................... C128
3870369 ..... STTPR08CA09 WG ...................... C128
3870370 ..... STGPR12CA16 WG ..................... C127
3870371 ..... STGPR10CA11 WG ..................... C127
3870372 ..... STGPR08CA09 WG ..................... C127
3870373 ..... STGPL10CA11 WG ...................... C127
3870374 ..... STGPL08CA09 WG ...................... C127
3870376 ..... STFPR12CA16 WG ...................... C126
3870377 ..... STFPR10CA11 WG ...................... C126
3870378 ..... STFPR08CA09 WG ...................... C126
3870379 ..... STFPL12CA16 WG ...................... C126
3870380 ..... STFPL10CA11 WG ...................... C126
3870381 ..... STFPL08CA09 WG ...................... C126
3870382 ..... SSSPR10CA09 WG...................... C125
3870383 ..... SSSPL10CA09 WG ...................... C125
3870384 ..... SSSCR16CA12 WG ..................... C124
3870385 ..... SSSCR12CA12 WG ..................... C124
3870386 ..... SSSCR10CA09 WG ..................... C124
3870387 ..... SSSCL12CA12 WG ...................... C124
3870388 ..... SSRPR10CA09 WG ..................... C123
3870389 ..... SSRPL10CA09 WG ...................... C123
3870390 ..... SSRCR12CA12 WG ..................... C122
3870391 ..... SSRCL12CA12 WG ...................... C122
3870392 ..... SSKPR12CA09 WG...................... C121
3870393 ..... SSKPR10CA09 WG...................... C121
3870394 ..... SSKPL10CA09 WG ...................... C121
3870403 ..... MDQNL16CA15 WG ...................... C96
3870404 ..... MDJNR20CA15 WG ...................... C95
3870405 ..... MDJNR16CA15 WG ...................... C95
3870406 ..... MDJNL16CA15 WG ....................... C95
3870407 ..... MCLNR25CA19 WG ...................... C94
3870408 ..... MCLNR20CA12 WG ...................... C94
3870409 ..... MCLNR16CA12 WG ...................... C94
3870410 ..... MCLNR12CA12 WG ...................... C94
3870411 ..... MCLNL25CA19 WG ....................... C94
3870412 ..... MCLNL20CA12 WG ....................... C94
3870413 ..... MCLNL16CA12 WG ....................... C94
3870414 ..... MCLNL12CA12 WG ....................... C94
3870415 ..... MCKNR16CA12 WG ...................... C93
3870416 ..... MCKNR12CA12 WG ...................... C93
3870417 ..... MCKNL12CA12 WG....................... C93
3870418 ..... MCFNR20CA12 WG ...................... C92
3870419 ..... MCFNR16CA12 WG ...................... C92
3870420 ..... MCFNR12CA12 WG ...................... C92
3870421 ..... MCFNR10CA09 WG ...................... C92
3870422 ..... MCFNL16CA12 WG ....................... C92
3870423 ..... MCFNL12CA12 WG ....................... C92
3870424 ..... CTFPR20CA22 WG ...................... C109
3870426 ..... CTFPR12CA16 WG ...................... C109
3870427 ..... CTFPR10CA11 WG ...................... C109
3870428 ..... CTFPL12CA16 WG ...................... C109
3870429 ..... CSSPR12CA12 WG ..................... C108
3870430 ..... CSSPR10CA09 WG ..................... C108
3870431 ..... CSSPL20CA12 WG ...................... C108
3870432 ..... CSSPL12CA12 WG ...................... C108
3870433 ..... CSSPL10CA09 WG ...................... C108
3870434 ..... CSRPR12CA12 WG ..................... C107
3870435 ..... CSRPR10CA09 WG ..................... C107
3870436 ..... CSKPR12CA12 WG ..................... C106
3870437 ..... CSKPR10CA09 WG ..................... C106
3871190 ..... SSKCR16CA12 WG ..................... C120
3871191 ..... SSKCR12CA12 WG ..................... C120
3871192 ..... SSKCR10CA09 WG ..................... C120
3871243 ..... SSKCL12CA12 WG ...................... C120
3871244 ..... SRGCR10CA08 WG ..................... C119
3871245 ..... SRGCR08CA06 WG ..................... C119
3871246 ..... SRGCL12CA10 WG ..................... C119
3871247 ..... SDJPR10CA07 WG ...................... C118
3871248 ..... SDJPL10CA07 WG ...................... C118
3871249 ..... SCWPR08CA06 WG .................... C117
3871250 ..... SCWPL08CA06 WG ..................... C117
3871251 ..... SCTPR08CA06 WG...................... C116
3871252 ..... SCTPR06CA05 WG...................... C116
3871253 ..... SCTPL08CA06 WG ...................... C116
3871254 ..... SCSPR08CA06 WG ..................... C115
3871255 ..... SCSPR06CA05 WG ..................... C115
3871257 ..... SCRPR08CA06 WG ..................... C114
3871258 ..... SCRPL08CA06 WG ...................... C114
3871259 ..... SCLPR10CA09 WG ...................... C113
3871260 ..... SCLPR08CA06 WG ...................... C113
3871261 ..... SCLPR06CA05 WG ...................... C113
3871262 ..... SCLPL10CA09 WG ...................... C113
3871263 ..... SCLPL08CA06 WG ...................... C113
3871264 ..... SCLPL06CA05 WG ...................... C113
3871265 ..... SCLCR12CA12 WG ..................... C112
3871266 ..... SCLCL16CA12 WG ...................... C112
3871267 ..... SCLCL12CA12 WG ...................... C112
3871268 ..... SCLCR10CA09 WG ..................... C112
3871270 ..... SCGPR08CA06 WG ..................... C111
3871271 ..... SCGPL08CA06 WG ..................... C111
3871272 ..... SCFPR10CA09 WG ...................... C110
3871283 ..... SCFPR08CA06 WG ...................... C110
3871284 ..... SCFPR06CA05 WG ...................... C110
3871285 ..... SCFPL08CA06 WG ...................... C110
3871286 ..... PSKNR16CA12 WG ..................... C105
3871287 ..... PSKNR12CA12 WG ..................... C105
3871288 ..... PSKNL16CA12 WG ...................... C105
3871289 ..... PSKNR20CA15 WG ..................... C105
3871290 ..... PCLNR16CA12 WG ..................... C104
3871291 ..... PCLNR12CA12 WG ..................... C104
3871292 ..... PCLNL20CA16 WG ...................... C104
3871293 ..... PCLNL16CA12 WG ...................... C104
3871294 ..... MTGNR20CA22 WG .................... C103
3871295 ..... MTGNR16CA16 WG .................... C103
3871296 ..... MTGNR12CA16 WG .................... C103
3871297 ..... MTGNL20CA22 WG ..................... C103
3871298 ..... MTGNL16CA16 WG ..................... C103
3871299 ..... MTGNL12CA16 WG ..................... C103
3871300 ..... MTFNR25CA27 WG ..................... C102
3871301 ..... MTFNR20CA22 WG ..................... C102
3871302 ..... MTFNR16CA16 WG ..................... C102
3871303 ..... MTFNR12CA16 WG ..................... C102
3871305 ..... MTFNL16CA16 WG ..................... C102
3871306 ..... MTFNL12CA16 WG ..................... C102
3871510 ..... CRDPN2525M06V WG .................. C40
3871511 ..... CRDPN2525M09V WG .................. C40
3871512 ..... CRDPN3232P09V WG ................... C40
3871513 ..... CRDPN2525M12V WG .................. C40
3871514 ..... CRDPN3232P12V WG ................... C40
3871515 ..... CRGPR2525M06V WG .................. C41
3871516 ..... CRGPL2525M06V WG ................... C41
3871517 ..... CRGPR2525M09V WG .................. C41
3871518 ..... CRGPL2525M09V WG ................... C41
3871519 ..... CRGPR3232P09V WG ................... C41
3871520 ..... CRGPL3232P09V WG .................... C41
3871521 ..... CRGPR2525M12V WG .................. C41
3871522 ..... CRGPL2525M12V WG ................... C41
3871524 ..... CRGPL3232P12V WG .................... C41
3871691 ..... 664W25008WW ............................. Q4
3871692 ..... 660W25008WW ............................. Q4
3871833 ..... 661W25008WW ............................. Q4
3871834 ..... 664W32009WW ............................. Q4
3871835 ..... 660W32009WW ............................. Q4
3871836 ..... 661W32009WW ............................. Q4
3871837 ..... 664W40009WW ............................. Q4
3871838 ..... 660W40009WW ............................. Q4
3871839 ..... 661W40009WW ............................. Q4
3871840 ..... 664W50000WW ............................. Q4
3871841 ..... 660W50000WW ............................. Q4
3871842 ..... 661W50000WW ............................. Q4
3873551 ..... TNMM16040865 TN7125 ............. B90
3878354 ..... PCBNL2525M12 WG ..................... C20
3878355 ..... PCBNL3232P16 WG...................... C20
3878356 ..... PCBNR2525M12 WG .................... C20
3878357 ..... PCBNL3232P19 WG...................... C20
Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 27 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRAND O b 28 2015 3 09 PM
Z28 widia.com
Index by Order Number
Order No. Catalogue No. Page(s)
3878358 ..... PCBNR3232P19 WG ..................... C20
3878359 ..... PCBNL3225P16 WG...................... C20
3878360 ..... PCBNL2020K12 WG...................... C20
3878361 ..... PCBNR2020K12 WG ..................... C20
3878362 ..... PCBNL4040S19 WG...................... C20
3878363 ..... PCBNR3232P16 WG ..................... C20
3878364 ..... PCBNR4040S19 WG ..................... C20
3878365 ..... PCBNL2525M16 WG ..................... C20
3878366 ..... PCBNR2525M16 WG .................... C20
3878367 ..... PCBNR3225P16 WG ..................... C20
3878368 ..... PCKNL3232P19 WG ...................... C21
3878369 ..... PCKNL2525M12 WG ..................... C21
3878370 ..... PCKNR2525M12 WG .................... C21
3878371 ..... PCKNR3232P19 WG ..................... C21
3878372 ..... PCKNR2020K12 WG ..................... C21
3878373 ..... PCKNL2020K12 WG ...................... C21
3878374 ..... PCKNR2525M16 WG .................... C21
3878375 ..... PCKNR3225P16 WG ..................... C21
3878376 ..... PCKNL3225P16 WG ...................... C21
3878377 ..... PCKNL2525M16 WG ..................... C21
3878378 ..... PCKNL4040S19 WG ...................... C21
3878379 ..... PCLNL1616H12 WG ...................... C22
3878380 ..... PCLNL2525M16 WG ..................... C22
3878381 ..... PCLNL3225P19 WG ...................... C22
3878393 ..... PCLNL3232P19 WG ...................... C22
3878396 ..... PCLNR3232P16 WG...................... C22
3878397 ..... PCLNL3225P12 WG ...................... C22
3878398 ..... PCLNL2525M12 WG ..................... C22
3878400 ..... PCLNR1616H12 WG ..................... C22
3878401 ..... PCLNR2525M16 WG ..................... C22
3878402 ..... PCLNR3225P12 WG...................... C22
3878413 ..... PCLNR3225P19 WG...................... C22
3878414 ..... PCLNR3232P19 WG...................... C22
3878415 ..... PCLNL3232P16 WG ...................... C22
3878416 ..... PCLNL4040S19 WG ...................... C22
3878417 ..... PCLNR4040S19 WG...................... C22
3878418 ..... PCLNL2020K12 WG ...................... C22
3878419 ..... PCLNR2525M12 WG ..................... C22
3878421 ..... PCLNR3225P16 WG...................... C22
3878422 ..... PCLNR2020K12 WG...................... C22
3878423 ..... PDJNL3225P15 WG ...................... C23
3878424 ..... PDJNR1616H11 WG ..................... C23
3878425 ..... PDJNR3225P15 WG...................... C23
3878426 ..... PDJNR4025R15 WG ..................... C23
3878427 ..... PDJNL2020K11 WG ...................... C23
3878428 ..... PDJNL2525M11 WG ..................... C23
3878429 ..... PDJNR2020K11 WG...................... C23
3879151 ..... PDJNR2525M11 WG ..................... C23
3879152 ..... PDJNR3232P15 WG...................... C23
3879313 ..... PDJNL1616H11 WG ...................... C23
3879314 ..... PDJNL2525M15 WG ..................... C23
3879315 ..... PDJNL3232P15 WG ...................... C23
3879316 ..... PDJNL4025R15 WG ...................... C23
3879317 ..... PDJNL2020K15 WG ...................... C23
3879318 ..... PDJNR2020K15 WG...................... C23
3879319 ..... PDNNR2525M15 WG .................... C24
3879320 ..... PDNNL2525M15 WG .................... C24
3879322 ..... PDNNR4025M15 WG .................... C24
3879323 ..... PSBNL4040S19 WG ...................... C25
3879324 ..... PSBNR2020K12 WG ..................... C25
3879325 ..... PSBNL2020K12 WG ...................... C25
3879326 ..... PSBNL4040S25 WG ...................... C25
3879327 ..... PSBNR3232P19 WG ..................... C25
3879328 ..... PSBNL3232P19 WG ...................... C25
3879329 ..... PSBNL2525M15 WG ..................... C25
3879330 ..... PSBNR3232P15 WG ..................... C25
3879331 ..... PSBNR4040S25 WG ..................... C25
3879332 ..... PSBNL3232P15 WG ...................... C25
3879333 ..... PSBNR2525M15 WG .................... C25
3879334 ..... PSBNR4040S19 WG ..................... C25
3879335 ..... PSDNN2020K12 WG ..................... C26
3879336 ..... PSDNN1616H09 WG ..................... C26
3879337 ..... PSDNN2525M12 WG .................... C26
3879338 ..... PSDNN4040S25 WG ..................... C26
3879339 ..... PSKNL2525M12 WG ..................... C26
3879340 ..... PSKNR2020K12 WG ..................... C26
3879341 ..... PSKNR2525M12 WG ..................... C26
3879342 ..... PSKNR3232P19 WG ..................... C26
3879343 ..... PSKNL2020K12 WG ...................... C26
3879344 ..... PSKNL3232P19 WG ...................... C26
3879345 ..... PSKNL4040S19 WG ...................... C26
3879347 ..... PSSNL2020K12 WG ...................... C27
3879348 ..... PSSNR2020K12 WG ..................... C27
3879349 ..... PSSNR2525M15 WG ..................... C27
3879350 ..... PSSNR3232P19 WG ..................... C27
3879351 ..... PSSNR1616H09 WG ..................... C27
3879352 ..... PSSNR2525M12 WG ..................... C27
3879353 ..... PSSNL2525M12 WG ..................... C27
3879354 ..... PSSNR3232P15 WG ..................... C27
3879355 ..... PSSNL2525M15 WG ..................... C27
3879356 ..... PSSNL3232P19 WG ...................... C27
3879357 ..... PSSNL4040S19 WG ...................... C27
3879358 ..... PSSNL3225P12 WG ...................... C27
3879359 ..... PSSNR2020K09 WG ..................... C27
3879360 ..... PSSNR3225P12 WG ..................... C27
3879361 ..... PSSNR4040S19 WG ..................... C27
3879362 ..... PSSNR3225P15 WG ..................... C27
3879363 ..... PSSNL1616H09 WG ...................... C27
3879364 ..... PTFNR2525M16 WG ..................... C28
3879365 ..... PTFNL1616H16 WG ...................... C28
3879366 ..... PTFNL2020K16 WG ...................... C28
3879367 ..... PTFNR2020K16 WG ...................... C28
3879368 ..... PTFNL2525M16 WG ..................... C28
3879369 ..... PTFNR1616H16 WG ...................... C28
3879370 ..... PTFNR3225P22 WG ...................... C28
3879372 ..... PTFNR2525M22 WG ..................... C28
3879383 ..... PTGNL1616H16 WG...................... C29
3879384 ..... PTGNL2020K16 WG ...................... C29
3879385 ..... PTGNR1616H16 WG ..................... C29
3879386 ..... PTGNL2525M22 WG ..................... C29
3879387 ..... PTGNR2525M22 WG .................... C29
3879388 ..... PTGNL2525M16 WG ..................... C29
3879389 ..... PTGNR2020K16 WG ..................... C29
3879390 ..... PTGNR2525M16 WG .................... C29
3879391 ..... PTGNR3232P22 WG ..................... C29
3879392 ..... PTGNL3232P22 WG ...................... C29
3879403 ..... PWLNL2020K08 WG ..................... C30
3879404 ..... PWLNL2525M08 WG .................... C30
3879405 ..... PWLNR1616H06 WG .................... C30
3879406 ..... PWLNL2020K06 WG ..................... C30
3879407 ..... PWLNR2020K06 WG ..................... C30
3879408 ..... PWLNR2020K08 WG ..................... C30
3879409 ..... PWLNR2525M08 WG .................... C30
3879410 ..... PWLNL1616H06 WG ..................... C30
3879411 ..... SCLCL1616H09 WG ...................... C42
3879412 ..... SCLCL2020K09 WG ...................... C42
3879413 ..... SCLCL2525M12 WG ..................... C42
3879414 ..... SCLCR2020K12 WG ...................... C42
3879415 ..... SCLCL2020K12 WG ...................... C42
3879416 ..... SCLCR1616H09 WG ..................... C42
3879417 ..... SCLCR2020K09 WG ...................... C42
3879418 ..... SCLCR2525M12 WG ..................... C42
3879433 ..... SDHCL1616H11 WG ..................... C43
3879434 ..... SDHCL2525M15 WG..................... C43
3879435 ..... SDHCR1616H11 WG ..................... C43
3879436 ..... SDHCR2525M15 WG .................... C43
3879437 ..... SDHCR2020K11 WG ..................... C43
3879438 ..... SDHCL2525M11 WG..................... C43
3879439 ..... SDHCL2020K11 WG ..................... C43
3879440 ..... SDHCR2525M11 WG .................... C43
3879441 ..... SDJCL1616H07 WG ...................... C44
3879442 ..... SDJCL2020K07 WG ...................... C44
3879453 ..... SDJCL2525M11 WG ..................... C44
3879454 ..... SDJCL1616H11 WG ...................... C44
3879455 ..... SDJCL2525M15 WG ..................... C44
3879456 ..... SDJCR1616H07 WG ..................... C44
3879457 ..... SDJCR2020K15 WG ...................... C44
3879458 ..... SDJCR2020K07 WG ...................... C44
3879459 ..... SDJCR1616H11 WG ..................... C44
3879460 ..... SDJCR2020K11 WG ...................... C44
3879461 ..... SDJCR2525M11 WG ..................... C44
3879462 ..... SDJCL2020K11 WG ...................... C44
3879463 ..... SDJCR2525M15 WG ..................... C44
3879464 ..... SDJCR1010M07 WG ..................... C44
3879465 ..... SDNCN1616H11 WG ..................... C45
3879466 ..... SDNCN2525M15 WG .................... C45
3879467 ..... SDNCN2020K11 WG ..................... C45
3879468 ..... SDNCN0808L07 WG ..................... C45
3879469 ..... SDNCN1010M07 WG .................... C45
3879698 ..... CELNL2525M13MF7 WG .............. C33
3879699 ..... CELNL2525M13MN7 WG .............. C34
3879700 ..... CELNR2525M13MF7 WG .............. C33
3879701 ..... CELNR2525M13MN7 WG ............. C34
3879702 ..... SRDCN1616H08 WG ..................... C45
3879707 ..... PCKNR4040S19 WG ..................... C21
3879708 ..... PSKNR2525M15 WG ..................... C26
3879709 ..... PSKNL1616H09 WG ...................... C26
3879710 ..... PSKNR4040S19 WG ..................... C26
3879711 ..... PSSNL4040S25 WG ...................... C27
3879712 ..... PSSNL3232P15 WG ...................... C27
3879733 ..... SRDCN2020K08 WG ..................... C45
3879734 ..... SRDCN2525M10 WG .................... C45
3879735 ..... SRDCN1616H06 WG ..................... C45
3879736 ..... SRDCN2020K10 WG ..................... C45
3879737 ..... SRDCN2525M08 WG .................... C45
3879738 ..... SRDCN2525M12 WG .................... C45
3879739 ..... SSBCL1616H09 WG ...................... C46
3879740 ..... SSBCR2525M12 WG..................... C46
3879741 ..... SSBCR2020K12 WG ..................... C46
3879742 ..... SSSCL2525M12 WG ..................... C47
3879743 ..... SSSCL2020K12 WG ...................... C47
3879744 ..... SSSCR2525M12 WG ..................... C47
3879745 ..... SSSCL1616H09 WG ...................... C47
3879746 ..... SSSCR2020K12 WG ...................... C47
3879747 ..... SSSCR1616H09 WG ..................... C47
3879748 ..... STFCL2020K16 WG ...................... C48
3879750 ..... STFCR2525M16 WG ..................... C48
3879751 ..... STFCL1616H16 WG ...................... C48
3879752 ..... STFCL2525M16 WG ..................... C48
3879763 ..... STFCR2020K16 WG ...................... C48
3879764 ..... SVHBL2020K16 WG ...................... C48
3879765 ..... SVHBR2525M16 WG ..................... C48
3879766 ..... SVHBL2525M16 WG ..................... C48
3879767 ..... SVHBR2020K16 WG...................... C48
3879768 ..... SVHBL3225P16 WG ...................... C48
3879769 ..... SVJBR1616H16 WG ...................... C49
3879770 ..... SVJBL2020K16 WG ...................... C49
3879771 ..... SVJBL3225P16 WG ...................... C49
3879772 ..... SVJBL1616H16 WG ...................... C49
3879773 ..... SVJBR3225P16 WG ...................... C49
3879774 ..... SVJBL2525M16 WG ..................... C49
3879775 ..... SVJBR2525M16 WG ..................... C49
3879776 ..... SVJBR2020K16 WG ...................... C49
3879777 ..... SVVBN2020K16 WG ...................... C49
3879778 ..... SVVBN2525M16 WG ..................... C49
3879779 ..... SVVBN3225P16 WG ...................... C49
3879843 ..... PSSNL3225P15 WG ...................... C27
3879844 ..... PSSNL2020K09 WG ...................... C27
3879845 ..... PTFNR3232P22 WG ...................... C28
3879846 ..... PTGNR3225P22 WG ..................... C29
3879848 ..... SDJCL2020K15 WG ...................... C44
3879849 ..... SDNCN2525M11 WG .................... C45
3879850 ..... SSBCR1616H09 WG ..................... C46
3879851 ..... SSBCL2525M12 WG ..................... C46
3879852 ..... SSBCL2020K12 WG ...................... C46
3879853 ..... SVHBR3225P16 WG...................... C48
3881115 ..... 496905002LW TIALN-LW .............. O62
3881116 ..... 496906002LW TIALN-LW .............. O62
3881117 ..... 496908003LW TIALN-LW .............. O62
3881118 ..... 496910004LW TIALN-LW .............. O62
3881119 ..... 496912005LW TIALN-LW .............. O62
3881120 ..... 496914014LW TIALN-LW .............. O62
3881121 ..... 496916006LW TIALN-LW .............. O62
3881122 ..... 496918018LW TIALN-LW .............. O62
3881123 ..... 496920007LW TIALN-LW .............. O62
3881208 ..... HSK100ARFX420080M WG.......... W63
3881209 ..... HSK100ARFX550090M WG.......... W63
3881210 ..... HSK100ARFX720105M WG.......... W63
3883122 ..... DCMW11T304FST WDN25U ....... B207
3883133 ..... CCMW060208FST WDN25U ....... B199
3883134 ..... CCMW09T304FST WDN25U ....... B199
3883135 ..... CCMW060204FST WDN25U ....... B199
3883136 ..... CCMW09T308FST WDN25U ....... B199
3883137 ..... CPMW060204FST WDN25U ....... B205
3883138 ..... CPMW09T304FWST WDN25U .... B205
3883139 ..... CPMW050204FST WDN25U ....... B205
3883142 ..... DCMW070204FST WDN25U ....... B207
3883143 ..... DCMW11T308FST WDN25U ....... B207
3883144 ..... TCMW110204FST WDN25U........ B213
3883147 ..... VCMW110304FST WDN25U ....... B217
3883149 ..... A40VPTFNR22 WG ........................ C60
3883150 ..... A40VPTFNL22 WG ........................ C60
3883151 ..... A32UPTFNR16 WG ........................ C60
3883228 ..... TCMW110204FST WBK45U ........ B213
3883263 ..... A25TPTFNR16 WG ........................ C60
3883264 ..... A25TPTFNL16 WG ........................ C60
3883265 ..... A25TSCLCR12 WG ........................ C67
3883266 ..... A32TSCLCR12 WG ........................ C67
3883267 ..... A25TSCLCL12 WG ........................ C67
3883268 ..... A32TSCLCL12 WG ........................ C67
3883269 ..... A20SSCLCR09 WG ........................ C67
3883270 ..... A20SSCLCL09 WG ........................ C67
3883271 ..... A16RSCLCR09 WG........................ C67
3883272 ..... A16RSCLCL09 WG ........................ C67
3883275 ..... RNMN120300S02020 WBH40C
........................................................................ B210
3883278 ..... CNMN090312S02020 WBK40U
........................................................................ B202
3883279 ..... CNMN120408S02020 WBK40U
........................................................................ B202
3883280 ..... CNMN120412S02020 WBK40U
........................................................................ B202
3883281 ..... CNMA120408S02020 WBK40U
........................................................................ B202
Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 28 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRANDO b 28 20153 09PM
Z29
widia.com
Index by Order Number
Order No. Catalogue No. Page(s)
3883282 ..... CNMA120412S02020 WBK40U
........................................................................ B202
3883283 ..... A10KSCLCR06 WG ........................ C67
3883284 ..... A10KSCLCL06 WG ........................ C67
3883285 ..... A08JSCLCR06 WG ........................ C67
3883286 ..... A08JSCLCL06 WG ........................ C67
3883287 ..... A32TSDUCR15 WG ....................... C73
3883288 ..... A25TSDUCR11 WG ....................... C73
3883289 ..... A32TSDUCL15 WG ........................ C73
3883290 ..... A25TSDUCL11 WG ........................ C73
3883291 ..... A20SSDUCR11 WG ....................... C73
3883292 ..... A20SSDUCL11 WG........................ C73
3883293 ..... A16RSDUCR11 WG ....................... C73
3883294 ..... A16RSDUCR07 WG ....................... C73
3883295 ..... A16RSDUCL11 WG ....................... C73
3883296 ..... A16RSDUCL07 WG ....................... C73
3883297 ..... A10KSDUCR07 WG ....................... C73
3883298 ..... A10KSDUCL07 WG........................ C73
3883313 ..... DNMA110408S02020 WBK40U
........................................................................ B208
3883315 ..... RNMN090300S02020 WBK40U
........................................................................ B210
3883316 ..... RNMN120300S02020 WBK40U
........................................................................ B210
3883317 ..... RNMN120400S02020 WBK40U
........................................................................ B210
3883320 ..... SNMN090316S02020 WBK40U
........................................................................ B211
3883324 ..... SNMN120416T02020 WBK40U
........................................................................ B211
3883325 ..... SNMA120408S02020 WBK40U
........................................................................ B212
3883326 ..... SNMA120412S02020 WBK40U
........................................................................ B212
3883327 ..... DNGA150412EMT WBH25P ........ B207
3883328 ..... SNGA120408S01025MT WBH25P
........................................................................ B211
3883329 ..... TNGA160404S01025MT WBH25P
........................................................................ B214
3883356 ..... CNGA120404EFWMT WBH25P ... B201
3883358 ..... DNGA150404EFWMT WBH25P ... B208
3883359 ..... DNGA150408EFWMT WBH25P ... B208
3883360 ..... DNGA150412EFWMT WBH25P ... B208
3883361 ..... TNGA160408EFWMT WBH25P ... B213
3883362 ..... TNGA160412EFWMT WBH25P ... B213
3883363 ..... CNGA120408EMT WBH25P ........ B200
3883364 ..... CNGA120412EMT WBH25P ........ B200
3883365 ..... DNGA150408EMT WBH25P ........ B207
3883382 ..... A10KSTFCR11 WG ........................ C76
3883434 ..... A25TSVQBR16 WG........................ C80
3883435 ..... A25TSVQBL16 WG ........................ C80
3883436 ..... A16RSVQBR11 WG ....................... C80
3883438 ..... A25TSVUBR16 WG ........................ C81
3883439 ..... A25TSVUBL16 WG ........................ C81
3883440 ..... A20SSVUBR11 WG ........................ C81
3883442 ..... A40VPCLNR16 WG ........................ C60
3883443 ..... A10KSTFCL11 WG ........................ C76
3883444 ..... A16RSTFPR11 WG ........................ C78
3883445 ..... A16RSTFPL11 WG ........................ C78
3883446 ..... A10KSTFPR11 WG ........................ C78
3883447 ..... A10KSTFPL11 WG ........................ C78
3883449 ..... A10KSTWPL11 WG ....................... C80
3883450 ..... A25RCTFPR16 WG ........................ C65
3883451 ..... A16RCTFPR11 WG ........................ C65
3883452 ..... A25RCTFPL16 WG ........................ C65
3883453 ..... A16RCTFPL11 WG ........................ C65
3883454 ..... A32SPWLNR08 WG ....................... C61
3883455 ..... A20SPWLNR06 WG ....................... C61
3883456 ..... A32SPWLNL08 WG ....................... C61
3883457 ..... A20SPWLNL06 WG ....................... C61
3883458 ..... A25RPWLNR08 WG....................... C61
3883459 ..... A16RPWLNR06 WG....................... C61
3883461 ..... A16RPWLNL06 WG ....................... C61
3883462 ..... A25TSDQCR11 WG ....................... C71
3883463 ..... A40VPCLNR12 WG ........................ C60
3883464 ..... A40VPCLNL16 WG ........................ C60
3883465 ..... A40VPCLNL12 WG ........................ C60
3883466 ..... A32UPCLNR12 WG ....................... C60
3883467 ..... A32UPCLNL12 WG ........................ C60
3883468 ..... A25TPCLNR12 WG ........................ C60
3883469 ..... A25TPCLNL12 WG ........................ C60
3883473 ..... A25TSDQCL11 WG ....................... C71
3883474 ..... A20SSDQCR11 WG ....................... C71
3883475 ..... A20SSDQCL11 WG ....................... C71
3883476 ..... A16RSDQCR07 WG ....................... C71
3883477 ..... A16RSDQCL07 WG ....................... C71
3883505 ..... CCGW060202S01015C WBH10P
........................................................................ B197
3883506 ..... CCGW060204S01015C WBH10P
........................................................................ B197
3883507 ..... CCGW09T304S01015MT WBH10P
........................................................................ B198
3883508 ..... CCGW09T308S01015MT WBH10P
........................................................................ B198
3883509 ..... CNGA120404S01025MT WBH10P
........................................................................ B201
3883510 ..... CNGA120408S01025MT WBH10P
........................................................................ B201
3883511 ..... CNGA120412S01025MT WBH10P
........................................................................ B201
3883523 ..... CNGA120408S01025FWMT WBH10P
........................................................................ B201
3883524 ..... CPGW060202S01015C WBH10P
........................................................................ B203
3883525 ..... CPGW060204S01015C WBH10P
........................................................................ B203
3883526 ..... CPGW09T304S01015MT WBH10P
........................................................................ B205
3883527 ..... CPGW09T308S01015MT WBH10P
........................................................................ B205
3883528 ..... DCGW070202S01015C WBH10P
........................................................................ B206
3883529 ..... DCGW070204S01015C WBH10P
........................................................................ B206
3883530 ..... DCGW11T304S01015MT WBH10P
........................................................................ B206
3883531 ..... DCGW11T308S01015MT WBH10P
........................................................................ B206
3883532 ..... DNGA150404S01025MT WBH10P
........................................................................ B208
3883533 ..... DNGA150408S01025MT WBH10P
........................................................................ B208
3883534 ..... TPGW110204S01015C WBH10P
........................................................................ B215
3883535 ..... TPGW110208S01015C WBH10P
........................................................................ B215
3883536 ..... VBGW160404S01015MT WBH10P
........................................................................ B216
3883537 ..... VBGW160408S01015MT WBH10P
........................................................................ B216
3883538 ..... VNGA160404S01025MT WBH10P
........................................................................ B217
3883539 ..... VNGA160408S01025MT WBH10P
........................................................................ B217
3883560 ..... CCGW060202EFWC WBH25P ..... B198
3883561 ..... CCGW060202EC WBH25P .......... B197
3883562 ..... CCGW060204EFWC WBH25P ..... B198
3883564 ..... S32SCCLNL12MX7 WG ................. C62
3883565 ..... S32SCCLNR12MX7 WG ................ C62
3883566 ..... S40TCDQNL12MX7 WG ................ C63
3883567 ..... S40TCDQNR12MX7 WG ................ C63
3883568 ..... S40TCSYNL12MN7 WG ................. C64
3883569 ..... S40TCSYNR12MN7 WG ................ C64
3883573 ..... CCGW060204S01015C WBH25P
........................................................................ B197
3883574 ..... CCGW09T304EFWC WBH25P ..... B198
3883575 ..... CCGW09T304S01015C WBH25P
........................................................................ B197
3883576 ..... CCGW09T308EFWC WBH25P ..... B198
3883577 ..... CCGW09T308S01015C WBH25P
........................................................................ B197
3883578 ..... CPGW060202EC WBH25P .......... B203
3883579 ..... CPGW060204S01015C WBH25P
........................................................................ B203
3883580 ..... CPGW060208S01015C WBH25P
........................................................................ B203
3883581 ..... CPGW09T304S01015C WBH25P
........................................................................ B203
3883582 ..... DPGW070202EC WBH25P .......... B209
3883583 ..... DPGW070204S01015C WBH25P
........................................................................ B209
3883584 ..... CPGW09T308S01015C WBH25P
........................................................................ B203
3883585 ..... DCGW070202EC WBH25P .......... B206
3883586 ..... DCGW070204S01015C WBH25P
........................................................................ B206
3883587 ..... DPGW070208S01015C WBH25P
........................................................................ B209
3883588 ..... TCGW110202EC WBH25P .......... B212
3883589 ..... TCGW110204S01015C WBH25P
........................................................................ B212
3883590 ..... TPGW110202EC WBH25P .......... B215
3883591 ..... TPGW110204S01015C WBH25P
........................................................................ B215
3883592 ..... TPGW110208S01015C WBH25P
........................................................................ B215
3883885 ..... CNGA120404S01025MT WBH25P
........................................................................ B201
3883886 ..... CNGA120408S01025MT WBH25P
........................................................................ B201
3883887 ..... CNGA120412S01025MT WBH25P
........................................................................ B201
3883888 ..... DNGA150404S01025MT WBH25P
........................................................................ B208
3883889 ..... DNGA150408S01025MT WBH25P
........................................................................ B208
3883891 ..... SNGA120412S01025MT WBH25P
........................................................................ B211
3883892 ..... TNGA160408S01025MT WBH25P
........................................................................ B214
3883893 ..... TNGA160412S01025MT WBH25P
........................................................................ B214
3883894 ..... VNGA160404S01025MT WBH25P
........................................................................ B217
3883896 ..... VNGA160408S01025MT WBH25P
........................................................................ B217
3883912 ..... CNGA120408EFWMT WBH25P ... B201
3883915 ..... SNGA120404S01025MT WBH25P
........................................................................ B211
3883954 ..... SNGA120408S01025MT WBH10U
........................................................................ B211
3883955 ..... SNGA120412S01025MT WBH10U
........................................................................ B211
3883957 ..... TCGW110204S01015C WBH10U
........................................................................ B212
3883959 ..... TNGA160408S01025MT WBH10U
........................................................................ B214
3883960 ..... TNGA160412S01025MT WBH10U
........................................................................ B214
3884731 ..... CDHBS4T0X0 CG5 ........................ D42
3884732 ..... CDHBS4T002 CG5 ........................ D42
3885959 ..... MB010062L CM1 ......................... D80
3885960 ..... MB010062L CG5 .......................... D80
3885961 ..... MB030187L CG5 .......................... D80
3885962 ..... MB030187L CM1 ......................... D80
3885983 ..... MB062187L CG5 .......................... D80
3885984 ..... MB062187L CM1 ......................... D80
3885985 ..... MB062187R CM1 ......................... D79
3885986 ..... MB062312L CG5 .......................... D80
3885987 ..... MB062312L CM1 ......................... D80
3885989 ..... MB094281L CM1 ......................... D80
3885990 ..... MB094500L CG5 .......................... D80
3885991 ..... MB094500L CM1 ......................... D80
3885992 ..... MB125375L CG5 .......................... D80
3885993 ..... MB125375L CM1 ......................... D80
3885994 ..... MB125625L CG5 .......................... D80
3885995 ..... MB125625L CM1 ......................... D80
3885996 ..... MB156500L CM1 ......................... D80
3885997 ..... MB156500R CM1 ......................... D79
3885998 ..... MB156875L CG5 .......................... D80
3885999 ..... MB156875L CM1 ......................... D80
3886000 ..... MG095030L CG5 .......................... D81
3886001 ..... MG095030L CM1 ......................... D81
3886002 ..... MG125040L CG5 .......................... D81
3886003 ..... MG125040L CM1 ......................... D81
3886548 ..... GSBMW81003L WG ...................... D23
3886549 ..... GSBMW81003R WG ..................... D23
3886550 ..... QSBM101270L WG ....................... D18
3886551 ..... QSBM101275L WG ....................... D18
3886552 ..... QSBM101275R WG ...................... D18
3886943 ..... QSBM121520L WG ....................... D18
3886944 ..... QSBM1316385L WG ..................... D19
3886945 ..... QSBM1316385R WG .................... D19
3886947 ..... QSBM1316635L WG ..................... D19
3886948 ..... QSBM1316635R WG .................... D19
3886949 ..... QSBM15920630R WG .................. D19
3886950 ..... QSBM15920635R WG .................. D19
3886952 ..... QSBMW101273L WG .................... D24
3886967 ..... SSBM202030L WG ....................... D21
3886968 ..... SSBM202030R WG ....................... D21
3886969 ..... SSBM202035L WG ....................... D21
3888130 ..... 456681-001400 CERMETDCFD ... W12
3888131 ..... 456681-001500 CERMETDCFD ... W12
3888132 ..... 456681-001600 CERMETDCFD ... W12
3888403 ..... 456681-001700 CERMETDCFD ... W12
3888404 ..... 456681-001800 CERMETDCFD ... W12
3888405 ..... 456681-001900 CERMETDCFD ... W12
3888406 ..... 456681-002000 CERMETDCFD ... W12
3888407 ..... 456680-001400 CERMETDCFD ... W16
3888408 ..... 456680-001500 CERMETDCFD ... W16
3888409 ..... 456680-001600 CERMETDCFD ... W16
3888410 ..... 456680-001700 CERMETDCFD ... W16
3888411 ..... 456680-001800 CERMETDCFD ... W16
Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 29 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRAND O b 28 2015 3 09 PM
Z30 widia.com
Index by Order Number
Order No. Catalogue No. Page(s)
3888412 ..... 456680-001900 CERMETDCFD ... W16
3888413 ..... 456680-002000 CERMETDCFD ... W16
3890853 ..... CSBM4512125L WG ..................... D11
3890854 ..... CSBM4512255L WG ..................... D11
3890855 ..... CSBM6412325L WG ..................... D11
3890856 ..... FSBM5212125L WG ..................... D15
3890857 ..... FSBM5212255R WG ..................... D15
3890858 ..... FSBM6612320R WG ..................... D15
3890860 ..... FSBM6616190R WG ..................... D15
3890861 ..... FSBM6616320L WG ..................... D15
3890862 ..... FSBM6616325R WG ..................... D15
3890864 ..... QSBM9916295R WG .................... D19
3890865 ..... QSBM9916480R WG .................... D19
3890866 ..... SSOM1325385R WG .................... D22
3890867 ..... SSOM1325630R WG .................... D22
3890868 ..... SSOM1325635R WG .................... D22
3895891 ..... SCBM162540L WG ....................... D21
3895892 ..... SCBM162540R WG ....................... D21
3896002 ..... CCBM41527L WG ......................... D12
3896003 ..... SCBM162545L WG ....................... D21
3896004 ..... SCBM162545R WG ....................... D21
3896005 ..... SCBM202540L WG ....................... D21
3896006 ..... SCBM202545R WG ....................... D21
3896010 ..... SDBM162540L WG ....................... D22
3896011 ..... SDBM162540R WG....................... D22
3896012 ..... SDBM162545L WG ....................... D22
3896013 ..... SDBM202540L WG ....................... D22
3896014 ..... SDBM202540R WG....................... D22
3896015 ..... CCBM4816225R WG .................... D13
3896017 ..... CCBM4816485R WG .................... D13
3896018 ..... CCBM6516325R WG .................... D13
3896019 ..... CCBM6612635R WG .................... D13
3896022 ..... CCPM81525L WG ......................... D26
3896023 ..... CCBM51000L WG ......................... D12
3896024 ..... CCBM61000L WG ......................... D12
3896025 ..... CCBM61000R WG......................... D12
3896026 ..... CCBM61520L WG ......................... D12
3896027 ..... CCBM81005L WG ......................... D12
3896028 ..... CCBM81520L WG ......................... D12
3896030 ..... FCBM61520L WG ......................... D16
3896031 ..... FCBM61520R WG ......................... D16
3896032 ..... FCBM81520L WG ......................... D16
3896035 ..... FCBM51000L WG ......................... D16
3896036 ..... FCBM51000R WG ......................... D16
3896037 ..... FCBM51005L WG ......................... D16
3896039 ..... GCBMW51523L WG ...................... D23
3896040 ..... GCBMW51523R WG ..................... D23
3896043 ..... QCBM122540L WG ....................... D20
3896044 ..... QCBM122545L WG ....................... D20
3896045 ..... QCBMW102543L WG ................... D24
3896046 ..... QCBMW122543L WG ................... D24
3896052 ..... GSPM1316515L WG ..................... D26
3896067 ..... FCBM5312510L WG ..................... D17
3896068 ..... FCBM5312515L WG ..................... D17
3896069 ..... FCBM5316250R WG ..................... D17
3896070 ..... FCBM5316255L WG ..................... D17
3896072 ..... FCBM6612630R WG ..................... D17
3896073 ..... GCPM16254225R WG .................. D27
3896083 ..... FCBM6612635R WG ..................... D17
3896084 ..... FCBM6616320R WG ..................... D17
3896085 ..... FCBM6616325L WG ..................... D17
3896086 ..... FCBM8216380R WG ..................... D17
3896087 ..... FCBM8216385L WG ..................... D17
3896089 ..... QSBM9916295L WG ..................... D19
3896090 ..... SSOM1325380R WG .................... D22
3896091 ..... SCBM202545L WG ....................... D21
3896092 ..... SDBM202545R WG....................... D22
3896093 ..... CCBM6612635L WG ..................... D13
3896095 ..... FCBM8216790R WG ..................... D17
3896121 ..... ATBM12100 WG ........................... D62
3896193 ..... ATBM16100 WG ........................... D62
3896194 ..... ATBM20102 WG ........................... D62
3896195 ..... ATBM25102 WG ........................... D62
3896196 ..... BSBM20152 WG ........................... D62
3896198 ..... MTMM1040 WG............................ D74
3896199 ..... MTMM12100 WG ......................... D74
3896200 ..... MTMM1240 WG............................ D74
3896201 ..... MTMM22127 WG ......................... D74
3896202 ..... MTMM840 WG .............................. D74
3896204 ..... CSBM5650L WG ........................... D10
3896205 ..... CSBM5650R WG ........................... D10
3896206 ..... CSBM5655L WG ........................... D10
3896207 ..... CSBM6650L WG ........................... D10
3896208 ..... CSBM6655L WG ........................... D10
3896209 ..... CSBM8760L WG ........................... D10
3896211 ..... FSBM61000L WG ......................... D14
3896213 ..... FSBM81000L WG ......................... D14
3897011 ..... FSBM5216125R WG ..................... D15
3897012 ..... GCBMW81523L WG ...................... D23
3897084 ..... SDBM202545L WG ....................... D22
3897085 ..... FCBM5316255R WG ..................... D17
3897442 ..... MG125040R CG5 ......................... D81
3897483 ..... MG156050L CG5 .......................... D81
3897484 ..... MG156050L CM1 ......................... D81
3897486 ..... MP062187L CM1 ......................... D82
3897487 ..... MP094281L CM1 ......................... D82
3897488 ..... MP094281R CM1 ......................... D82
3897490 ..... MP125375L CM1 ......................... D82
3897491 ..... MP156500L CG5 .......................... D82
3897492 ..... MP156500L CM1 ......................... D82
3897493 ..... MT09560F2L CG5 ........................ D83
3897494 ..... MT09560F2L CM1 ........................ D83
3897495 ..... MT12560F2L CM1 ........................ D83
3897496 ..... MT12560F2L CG5 ........................ D83
3897497 ..... MT12560F2R CM1 ....................... D83
3897498 ..... MT15660F2L CG5 ........................ D83
3897499 ..... MT15660F2L CM1 ........................ D83
3897894 ..... GSPM101638225L WG ................. D26
3897895 ..... GSPM1016385L WG ..................... D26
3897896 ..... GSPM131651225L WG ................. D26
3897899 ..... CCPM61525L WG ......................... D26
3897903 ..... GCPM10254225L WG ................... D27
3897904 ..... GCPM102545R WG ...................... D27
3897905 ..... GCPM12254225L WG ................... D27
3897906 ..... GCPM12254225R WG .................. D27
3897907 ..... GCPM122545L WG ....................... D27
3897908 ..... GCPM16254225L WG ................... D27
3897909 ..... GCPM162545R WG ...................... D27
3898717 ..... CPGN120304F WDN25U ............. B203
3898718 ..... CPGN120308F WDN25U ............. B203
3898719 ..... TPGN110304F WDN25U ............. B215
3898720 ..... TPGN110308F WDN25U ............. B215
3898721 ..... TPGN160304F WDN25U ............. B215
3898722 ..... TPGN160308F WDN25U ............. B215
3898725 ..... TPGN220408F WDN25U ............. B215
3898726 ..... CNGA120404FST WDN25U ......... B200
3898727 ..... CNGA120408FST WDN25U ......... B200
3898729 ..... CNMS120408FST WDN25U ........ B202
3898730 ..... DNGA150404FST WDN25U ......... B207
3898731 ..... DNGA150408FST WDN25U ......... B207
3898732 ..... DNMS150404FST WDN25U ........ B209
3898733 ..... DNMS150408FST WDN25U ........ B209
3898734 ..... TNMS160404FST WDN25U......... B214
3898735 ..... TNMS160408FST WDN25U......... B214
3898736 ..... VNGA160404FST WDN25U ......... B217
3898737 ..... VNGA160408FST WDN25U ......... B217
3898738 ..... VNMS160404FST WDN25U ........ B218
3898739 ..... VNMS160408FST WDN25U ........ B218
3898740 ..... WNGA080404FST WDN25U ........ B218
3898741 ..... WNGA080408FST WDN25U ........ B218
3898742 ..... SNMS120408FST WDN25U ........ B212
3898743 ..... SNMS120412FST WDN25U ........ B212
3898744 ..... CDHBS4T004FST WDN25U ......... B199
3898745 ..... CDHBS4T002FST WDN25U ......... B199
3898746 ..... CCGW060204FST WDN25U ........ B197
3898749 ..... CCGW09T304FST WDN25U ........ B197
3898750 ..... CCGW09T308FST WDN25U ........ B197
3898751 ..... CPGW060202FST WDN25U ........ B204
3898752 ..... CPGW060204FST WDN25U ........ B204
3898753 ..... CPGW060208FST WDN25U ........ B204
3898754 ..... CPGW09T304FST WDN25U ........ B204
3898755 ..... CPGW09T308FST WDN25U ........ B204
3898756 ..... CPGW120404FST WDN25U ........ B204
3898757 ..... CPGW120408FST WDN25U ........ B204
3898758 ..... CPGW060204FWST WDN25U ..... B204
3898759 ..... CPGW09T308FWST WDN25U ..... B204
3898760 ..... CPGW120408FWST WDN25U ..... B204
3898761 ..... DCGW070204FST WDN25U ........ B206
3898762 ..... DCGW11T304FST WDN25U ........ B206
3898763 ..... DPGW070202FST WDN25U ........ B210
3898764 ..... DPGW070204FST WDN25U ........ B210
3898765 ..... DPGW11T304FST WDN25U ........ B210
3898766 ..... DPGW070204FWST WDN25U ..... B210
3898767 ..... DPGW11T304FWST WDN25U ..... B210
3898768 ..... TCGW110204FST WDN25U ........ B213
3898769 ..... TCGW16T304FST WDN25U ........ B213
3898770 ..... TPGW110204FST WDN25U ........ B216
3898771 ..... TPGW110208FST WDN25U ........ B216
3898772 ..... TPGW16T304FST WDN25U......... B216
3898773 ..... TPGW16T308FST WDN25U......... B216
3898774 ..... VBGW110304FST WDN25U ........ B216
3898775 ..... VBGW160404FST WDN25U ........ B216
3899539 ..... TDD108Z03000 WU20PD ............T112
3899540 ..... TDD108Z03175 WU20PD ............T112
3899541 ..... TDD108Z03500 WU20PD ............T112
3899542 ..... TDD108Z03571 WU20PD ............T112
3899567 ..... TDD107Z07541 WU20PD ............T110
3899568 ..... TDD107Z07938 WU20PD ............T110
3899569 ..... TDD107Z08000 WU20PD ............T110
3899571 ..... TDD107Z08433 WU20PD ............T110
3899572 ..... TDD107Z08500 WU20PD ............T111
3899573 ..... TDD108Z03800 WU20PD ............T112
3899574 ..... TDD108Z03970 WU20PD ............T112
3899575 ..... TDD108Z04000 WU20PD ............T112
3899576 ..... TDD108Z04039 WU20PD ............T112
3899577 ..... TDD108Z04300 WU20PD ............T112
3899578 ..... TDD108Z04500 WU20PD ............T112
3899579 ..... TDD108Z04623 WU20PD ............T112
3899580 ..... TDD108Z04763 WU20PD ............T112
3899581 ..... TDD108Z05000 WU20PD ............T112
3899582 ..... TDD108Z05159 WU20PD ............T112
3899583 ..... TDD108Z05410 WU20PD ............T112
3899584 ..... TDD108Z05500 WU20PD ............T112
3899585 ..... TDD108Z05558 WU20PD ............T112
3899586 ..... TDD108Z05800 WU20PD ............T112
3899587 ..... TDD108Z06000 WU20PD ............T112
3899588 ..... TDD108Z06200 WU20PD ............T112
3899589 ..... TDD108Z06350 WU20PD ............T112
3899590 ..... TDD108Z06500 WU20PD ............T112
3899591 ..... TDD108Z06528 WU20PD ............T112
3899592 ..... TDD108Z06746 WU20PD ............T112
3899593 ..... TDD108Z06800 WU20PD ............T113
3899594 ..... TDD108Z06909 WU20PD ............T113
3899595 ..... TDD108Z07000 WU20PD ............T113
3899600 ..... TDD108Z07145 WU20PD ............T113
3899601 ..... TDD108Z07500 WU20PD ............T113
3899603 ..... TDD107Z08733 WU20PD ............T111
3899604 ..... TDD107Z09000 WU20PD ............T111
3899605 ..... TDD107Z09347 WU20PD ............T111
3899606 ..... TDD107Z09500 WU20PD ............T111
3899607 ..... TDD107Z09525 WU20PD ............T111
3899610 ..... TDD107Z10000 WU20PD ............T111
3899611 ..... TDD107Z10300 WU20PD ............T111
3899612 ..... TDD107Z10320 WU20PD ............T111
3899613 ..... TDD107Z10500 WU20PD ............T111
3899614 ..... TDD107Z10716 WU20PD ............T111
3899615 ..... TDD107Z11000 WU20PD ............T111
3899616 ..... TDD107Z11113 WU20PD ............T111
3899617 ..... TDD107Z11500 WU20PD ............T111
3899619 ..... TDD107Z12000 WU20PD ............T111
3899621 ..... TDD107Z12500 WU20PD ............T111
3899622 ..... TDD107Z12700 WU20PD ............T111
3899623 ..... TDD107Z13000 WU20PD ............T111
3899626 ..... TDD105Z03000 WU20PD ............T106
3899627 ..... TDD105Z03175 WU20PD ............T106
3899628 ..... TDD105Z03500 WU20PD ............T106
3899629 ..... TDD105Z03571 WU20PD ............T106
3899630 ..... TDD105Z03800 WU20PD ............T106
3899631 ..... TDD105Z03970 WU20PD ............T106
3899632 ..... TDD105Z04000 WU20PD ............T106
3899653 ..... TDD108Z07938 WU20PD ............T113
3899654 ..... TDD108Z08000 WU20PD ............T113
3899655 ..... TDD108Z08334 WU20PD ............T113
3899657 ..... TDD108Z08500 WU20PD ............T113
3899658 ..... TDD108Z08733 WU20PD ............T113
3899659 ..... TDD108Z09000 WU20PD ............T113
3899661 ..... TDD108Z09500 WU20PD ............T113
3899662 ..... TDD108Z09525 WU20PD ............T113
3899663 ..... TDD108Z09750 WU20PD ............T113
3899665 ..... TDD108Z10000 WU20PD ............T113
3899666 ..... TDD108Z10200 WU20PD ............T113
3899667 ..... TDD108Z10320 WU20PD ............T113
3899668 ..... TDD108Z10500 WU20PD ............T113
3899670 ..... TDD108Z11000 WU20PD ............T113
3899671 ..... TDD108Z11113 WU20PD ............T113
3899672 ..... TDD108Z11500 WU20PD ............T113
3899674 ..... TDD108Z12000 WU20PD ............T113
3899675 ..... TDD108Z12304 WU20PD ............T113
3899676 ..... TDD108Z12500 WU20PD ............T113
3899677 ..... TDD108Z12700 WU20PD ............T113
3899678 ..... TDD108Z13000 WU20PD ............T113
3899683 ..... TDD105Z04039 WU20PD ............T106
3899684 ..... TDD105Z04300 WU20PD ............T106
3899685 ..... TDD105Z04500 WU20PD ............T106
3899686 ..... TDD105Z04623 WU20PD ............T106
3899687 ..... TDD105Z04763 WU20PD ............T106
3899688 ..... TDD105Z05000 WU20PD ............T106
3899689 ..... TDD105Z05159 WU20PD ............T106
3899690 ..... TDD105Z05410 WU20PD ............T106
3899691 ..... TDD105Z05500 WU20PD ............T106
3899692 ..... TDD105Z05558 WU20PD ............T106
3899693 ..... TDD105Z05800 WU20PD ............T106
3899694 ..... TDD105Z06000 WU20PD ............T106
3899695 ..... TDD105Z06200 WU20PD ............T106
Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 30 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRANDO b 28 20153 09PM
Z31
widia.com
Index by Order Number
Order No. Catalogue No. Page(s)
3899696 ..... TDD105Z06350 WU20PD ............T106
3899697 ..... TDD105Z06500 WU20PD ............T106
3899698 ..... TDD105Z06528 WU20PD ............T106
3899699 ..... TDD105Z06746 WU20PD ............T106
3899700 ..... TDD105Z06800 WU20PD ............T107
3899701 ..... TDD105Z06909 WU20PD ............T107
3899702 ..... TDD105Z07000 WU20PD ............T107
3899708 ..... TDD107Z03000 WU20PD ............T110
3899709 ..... TDD107Z03175 WU20PD ............T110
3899710 ..... TDD107Z03500 WU20PD ............T110
3899712 ..... TDD107Z03800 WU20PD ............T110
3899733 ..... TDD107Z03970 WU20PD ............T110
3899734 ..... TDD107Z04000 WU20PD ............T110
3899735 ..... TDD107Z04039 WU20PD ............T110
3899737 ..... TDD107Z04500 WU20PD ............T110
3899739 ..... TDD107Z04763 WU20PD ............T110
3899740 ..... TDD107Z05000 WU20PD ............T110
3899743 ..... TDD107Z05500 WU20PD ............T110
3899744 ..... TDD107Z05558 WU20PD ............T110
3899745 ..... TDD107Z05800 WU20PD ............T110
3899746 ..... TDD107Z06000 WU20PD ............T110
3899748 ..... TDD107Z06350 WU20PD ............T110
3899749 ..... TDD107Z06500 WU20PD ............T110
3899750 ..... TDD107Z06528 WU20PD ............T110
3899751 ..... TDD107Z06746 WU20PD ............T110
3899753 ..... TDD107Z06909 WU20PD ............T110
3899754 ..... TDD107Z07000 WU20PD ............T110
3899763 ..... TDD106Z07145 WU20PD ............T109
3899764 ..... TDD106Z07500 WU20PD ............T107
3899765 ..... TDD106Z07541 WU20PD ............T109
3899766 ..... TDD106Z07938 WU20PD ............T109
3899767 ..... TDD106Z08000 WU20PD ............T109
3899768 ..... TDD106Z08334 WU20PD ............T109
3899769 ..... TDD106Z08433 WU20PD ............T109
3899770 ..... TDD106Z08500 WU20PD ............T109
3899771 ..... TDD106Z08733 WU20PD ............T109
3899772 ..... TDD106Z09000 WU20PD ............T109
3899782 ..... TDD106Z03000 WU20PD ............T108
3899783 ..... TDD106Z09347 WU20PD ............T109
3899784 ..... TDD106Z09500 WU20PD ............T109
3899785 ..... TDD106Z09525 WU20PD ............T109
3899786 ..... TDD106Z09750 WU20PD ............T109
3899787 ..... TDD106Z09921 WU20PD ............T109
3899788 ..... TDD106Z10000 WU20PD ............T109
3899789 ..... TDD106Z10200 WU20PD ............T109
3899790 ..... TDD106Z10320 WU20PD ............T109
3899791 ..... TDD106Z10500 WU20PD ............T109
3899792 ..... TDD106Z10716 WU20PD ............T109
3899793 ..... TDD106Z11000 WU20PD ............T109
3899794 ..... TDD106Z11113 WU20PD ............T109
3899795 ..... TDD106Z11500 WU20PD ............T109
3899797 ..... TDD106Z12000 WU20PD ............T109
3899799 ..... TDD106Z12500 WU20PD ............T109
3899800 ..... TDD106Z12700 WU20PD ............T109
3899801 ..... TDD106Z13000 WU20PD ............T109
3899803 ..... TDD106Z03175 WU20PD ............T108
3899804 ..... TDD106Z03500 WU20PD ............T108
3899805 ..... TDD106Z03571 WU20PD ............T108
3899806 ..... TDD106Z03800 WU20PD ............T108
3899807 ..... TDD106Z03970 WU20PD ............T108
3899808 ..... TDD106Z04000 WU20PD ............T108
3899809 ..... TDD106Z04039 WU20PD ............T108
3899810 ..... TDD106Z04300 WU20PD ............T108
3899811 ..... TDD106Z04500 WU20PD ............T108
3899812 ..... TDD106Z04623 WU20PD ............T108
3899813 ..... TDD106Z04763 WU20PD ............T108
3899814 ..... TDD106Z05000 WU20PD ............T108
3899815 ..... TDD106Z05159 WU20PD ............T108
3899816 ..... TDD106Z05410 WU20PD ............T108
3899818 ..... TDD106Z05500 WU20PD ............T108
3899819 ..... TDD106Z05558 WU20PD ............T108
3899820 ..... TDD106Z05800 WU20PD ............T108
3899821 ..... TDD106Z06000 WU20PD ............T108
3899822 ..... TDD106Z06200 WU20PD ............T108
3899823 ..... TDD106Z06350 WU20PD ............T108
3899824 ..... TDD106Z06500 WU20PD ............T108
3899825 ..... TDD106Z06528 WU20PD ............T108
3899826 ..... TDD106Z06746 WU20PD ............T108
3899827 ..... TDD106Z06800 WU20PD ............T109
3899828 ..... TDD106Z06909 WU20PD ............T109
3899829 ..... TDD106Z07000 WU20PD ............T109
3899888 ..... PCKNL3232P16 WG ...................... C21
3899889 ..... PCKNR3232P16 WG ..................... C21
3899890 ..... SDJCR1212F07 WG ...................... C44
3899891 ..... SDJCL1212F07 WG ...................... C44
3899892 ..... SDJCL1010E07 WG ...................... C44
3900153 ..... PCLNL1616H09 WG ...................... C22
3900154 ..... PCLNR1616H09 WG ..................... C22
3900155 ..... PDNNL3225P15 WG ..................... C24
3900156 ..... PDNNR3225P15 WG ..................... C24
3900157 ..... PSBNL2525M12 WG ..................... C25
3900158 ..... PSBNR2525M12 WG .................... C25
3900159 ..... PSBNL5050T25 WG ...................... C25
3900160 ..... PSDNN3225P15 WG ..................... C26
3900161 ..... PSDNN3232P15 WG ..................... C26
3900162 ..... PTGNL4040T27 WG ...................... C29
3900163 ..... PTGNR4040T27 WG...................... C29
3900164 ..... PWLNR3232P08 WG ..................... C30
3900165 ..... PWLNL3232P08 WG ..................... C30
3900166 ..... PWLNL2525M06 WG .................... C30
3900167 ..... PWLNR2525M06 WG .................... C30
3900168 ..... SCLCL1212F09 WG ...................... C42
3900169 ..... SCLCR1010E06 WG ...................... C42
3900170 ..... SCLCR1212F09 WG ...................... C42
3900171 ..... SCLCL1010E06 WG ...................... C42
3900172 ..... SCLCR1212F06 WG ...................... C42
3900173 ..... SCLCL1212F06 WG ...................... C42
3900174 ..... SDJCL3225P15 WG ...................... C44
3900175 ..... SDJCR3225P15 WG ...................... C44
3900176 ..... SDJCL1212F11 WG ...................... C44
3900177 ..... SDJCR1212F11 WG ...................... C44
3900178 ..... SDNCN1212F11 WG ..................... C45
3900179 ..... SDNCN3225P15 WG ..................... C45
3900180 ..... SRDCN3225P16 WG ..................... C45
3900181 ..... SRDCN3225P12 WG ..................... C45
3900182 ..... SRDCN2020K06 WG ..................... C45
3900183 ..... SRDCN2525M06 WG .................... C45
3900184 ..... STFCR1212F11 WG ...................... C48
3900612 ..... TDD105Z07145 WU20PD ............T107
3900633 ..... TDD105Z07500 WU20PD ............T107
3900634 ..... TDD105Z07541 WU20PD ............T107
3900635 ..... TDD105Z07938 WU20PD ............T107
3900636 ..... TDD105Z08000 WU20PD ............T107
3900637 ..... TDD105Z08334 WU20PD ............T107
3900638 ..... TDD105Z08433 WU20PD ............T107
3900639 ..... TDD105Z08500 WU20PD ............T107
3900640 ..... TDD105Z08733 WU20PD ............T107
3900641 ..... TDD105Z09000 WU20PD ............T107
3900642 ..... TDD105Z09347 WU20PD ............T107
3900643 ..... TDD105Z09500 WU20PD ............T107
3900644 ..... TDD105Z09525 WU20PD ............T107
3900645 ..... TDD105Z09750 WU20PD ............T107
3900647 ..... TDD105Z10000 WU20PD ............T107
3900648 ..... TDD105Z10200 WU20PD ............T107
3900649 ..... TDD105Z10320 WU20PD ............T107
3900650 ..... TDD105Z10500 WU20PD ............T107
3900651 ..... TDD105Z10716 WU20PD ............T107
3900652 ..... TDD105Z11000 WU20PD ............T107
3900653 ..... TDD105Z11113 WU20PD ............T107
3900654 ..... TDD105Z11500 WU20PD ............T107
3900656 ..... TDD105Z12000 WU20PD ............T107
3900657 ..... TDD105Z12304 WU20PD ............T107
3900658 ..... TDD105Z12500 WU20PD ............T107
3900659 ..... TDD105Z12700 WU20PD ............T107
3900660 ..... TDD105Z13000 WU20PD ............T107
3902132 ..... KM40TSNEL2 .................................F28
3902283 ..... KM40TSNEL3 .................................F28
3902284 ..... KM40TSNEL4 .................................F28
3902285 ..... KM40TSNER2 ................................F28
3902286 ..... KM40TSNER3 ................................F28
3902287 ..... KM40TSNER4 ................................F28
3902288 ..... KM40TSNRL3045M .......................F29
3902289 ..... KM40TSNRR3045M .......................F29
3902290 ..... KM40TSNSL2 ................................F29
3902291 ..... KM40TSNSL3 ................................F29
3902292 ..... KM40TSNSL4 ................................F29
3902293 ..... KM40TSNSR2 ................................F29
3902294 ..... KM40TSNSR3 ................................F29
3902295 ..... KM40TSNSR4 ................................F29
3903943 ..... M270HF10 TN6540 ................... M127
3903944 ..... M270HF10 TN2505 ................... M127
3903945 ..... M270HF12 TN6540 ................... M127
3903946 ..... M270HF12 TN2505 ................... M127
3903947 ..... M270HF13 TN6540 ................... M127
3903948 ..... M270HF13 TN2505 ................... M127
3903949 ..... M270HF16 TN6540 ................... M127
3903950 ..... M270HF16 TN2505 ................... M127
3903953 ..... M270HF20 TN6540 ................... M127
3903954 ..... M270HF20 TN2505 ................... M127
3926514 ..... M270TD010A10L120 ..... M119, M125
3926515 ..... M270TD012A12L140 ..... M119, M125
3926516 ..... M270TD016A16L160 ..... M119, M125
3926517 ..... M270TD020A20L180 ..... M119, M125
3926518 ..... M270TD010A10L120C ... M120, M126
3926519 ..... M270TD010A10L150C ... M120, M126
3926520 ..... M270TD012A12L120C ... M120, M126
3926521 ..... M270TD012A12L160C ... M120, M126
3926522 ..... M270TD016A16L140C ... M120, M126
3926543 ..... M270TD016A16L180C ... M120, M126
3926544 ..... M270TD020A20L150C ... M120, M126
3926545 ..... M270TD020A20L200C ... M120, M126
3926546 ..... M270TD012M08 ............ M118, M124
3926547 ..... M270TD016M08 ............ M118, M124
3926548 ..... M270TD020M10 ............ M118, M124
3926601 ..... M170D032Z02M16RD16 .............M66
3926602 ..... M170D050Z04RD16 ....................M67
3926607 ..... M170D015Z02M08RD07 .............M46
3926608 ..... M170D016Z03M08RD07 .............M46
3926609 ..... M170D020Z04M10RD07 .............M46
3926610 ..... M170D025Z05M12RD07 .............M46
3926611 ..... M170D030Z05M16RD07 .............M46
3926612 ..... M170D035Z06M16RD07 .............M46
3929403 ..... M170D015Z02B16RD07 ..............M47
3929404 ..... M170D015Z02A16RD07L110 ......M48
3929405 ..... M170D015Z02A16RD07L150 ......M48
3929406 ..... M170D016Z03A16RD07L110 ......M48
3929407 ..... M170D016Z02A16RD07L150 ......M48
3929408 ..... M170D020Z04A20RD07L115 ......M48
3929409 ..... M170D020Z03A20RD07L140 ......M48
3930950 ..... M170D024Z02M12RD12 .............M59
3930954 ..... M170D035Z03M16RD12 .............M59
3930956 ..... M170D035Z04M16RD12 .............M59
3930958 ..... M170D042Z05M16RD12 .............M59
3930960 ..... M170D032Z03B32RD12 ..............M60
3930962 ..... M170D032Z02A32RD12L200 ......M61
3930964 ..... M170D032Z02A32RD12L300 ......M61
3930966 ..... M170D035Z02A32RD12L300 ......M61
3930968 ..... M170D040Z04RD12 ....................M62
3930970 ..... M170D050Z05RD12 ....................M62
3930972 ..... M170D052Z05RD12 ....................M62
3930975 ..... M170D063Z06RD12 ....................M62
3930976 ..... M170D066Z06RD12 ....................M62
3930979 ..... M170D080Z07RD12 ....................M62
3930981 ..... M170D100Z08RD12 ....................M62
3934623 ..... M170D052Z04RD16 ....................M67
3934624 ..... M170D063Z05RD16 ....................M67
3934625 ..... M170D066Z05RD16 ....................M67
3934626 ..... M170D080Z06RD16 ....................M67
3934628 ..... M170D100Z07RD16 ....................M67
3934629 ..... M170D125Z08RD16 ....................M67
3934647 ..... M170D020Z02M10RD10 .............M52
3934648 ..... M170D025Z02M12RD10 .............M52
3934649 ..... M170D025Z03M12RD10 .............M52
3934650 ..... M170D030Z04M16RD10 .............M52
3934651 ..... M170D035Z05M16RD10 .............M52
3934652 ..... M170D042Z06M16RD10 .............M52
3935336 ..... M170D012Z02M06RD07T ...........M42
3935337 ..... M170D012Z02M08RD07T ...........M42
3935338 ..... M170D015Z03M08RD07T ...........M42
3935339 ..... M170D012Z02A12RD07TL100 ....M43
3935340 ..... M170D012Z02A16RD07TL120 ....M43
3935341 ..... M170D012Z02A16RD07TL140 ....M43
3935342 ..... M170D015Z03A16RD07TL130 ....M43
3940703 ..... M170D020Z02B20RD10 ..............M53
3940704 ..... M170D020Z02A20RD10L140 ......M54
3940705 ..... M170D020Z02A25RD10L160 ......M54
3940706 ..... M170D020Z02A25RD10L180 ......M54
3940707 ..... M170D022Z02A20RD10L160 ......M54
3940708 ..... M170D025Z03B25RD10 ..............M53
3940709 ..... M170D025Z02A25RD10L180 ......M54
3940710 ..... M170D025Z02A25RD10L220 ......M54
3940711 ..... M170D028Z02A25RD10L200 ......M54
3940712 ..... M170D040Z05RD10 ....................M55
3940723 ..... M170D042Z05RD10 ....................M55
3940724 ..... M170D050Z06RD10 ....................M55
3940725 ..... M170D052Z06RD10 ....................M55
3949807 ..... SDMX150612RMM TN6540 ...........J49
3949809 ..... SDMX150612RMM TN7525 ...........J49
3949811 ..... SDMX150612RMH TN6540 ...........J50
3950583 ..... SDMX150612RMH TN7525 ...........J50
3950584 ..... SDMX150612RMH TN7535 ...........J50
3950585 ..... SDMX150616RMH TN6540 ...........J50
3950587 ..... SDMX150616RMH TN7535 ...........J50
3950588 ..... SDMX120408RMM TN6525 .....J45, K6
3950589 ..... SDMX120408RMM TN6540 .....J45, K6
3950590 ..... SDMX120408RMM TN7525 .....J45, K6
3950591 ..... SDMX120408RMM TN7535 .....J45, K6
3950592 ..... SDMX120408RMH TN6540 .....J46, K7
3950594 ..... SDMX120408RMH TN7525 .....J46, K7
3950595 ..... SDMX120408RMH TN7535 .....J46, K7
3950596 ..... SDMX120412RMM TN6525 .....J45, K6
3950597 ..... SDMX120412RMM TN6540 .....J45, K6
3950599 ..... SDMX120412RMM TN7525 .....J45, K6
3950600 ..... SDMX120412RMM TN7535 .....J45, K6
Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 31 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRAND O b 28 2015 3 09 PM
Z32 widia.com
Index by Order Number
Order No. Catalogue No. Page(s)
3950601 ..... SDMX120412RMH TN6525 .....J46, K7
3950603 ..... SDMX120412RMH TN6540 .....J46, K7
3950605 ..... SDMX120412RMH TN7525 .....J46, K7
3950606 ..... SDMX120412RMH TN7535 .....J46, K7
3950607 ..... SDMX120416RMH TN6540 .....J46, K7
3950609 ..... SDMX120416RMH TN7535 .....J46, K7
3950614 ..... SDMX120412RMH TN6520 .....J46, K7
3950831 ..... KM40TSLSEL16N ...........................F71
3950832 ..... KM40TSLSER16N ..........................F71
3950853 ..... KM40TSLSEL22N ...........................F71
3950854 ..... KM40TSLSER22N ..........................F71
3950855 ..... KM40TSLSSL16 .............................F72
3950856 ..... KM40TSLSSL22 .............................F72
3950857 ..... KM40TSLSSR16.............................F72
3950858 ..... KM40TSLSSR22.............................F72
3951835 ..... KM40TSE16JNEL2 KWH ................F35
3951836 ..... KM40TSE16JNER2 KWH ................F35
3954298 ..... G50MTTB1026KM40 .................... C84
3954299 ..... G60MTTB1226KM40 .................... C84
3954300 ..... G80MTTB1564KM63 .................... C84
3954301 ..... G100MTTB2066KM63 .................. C84
3954332 ..... HNGJ0704ANFNLDJ THM-U ........... H8,
H16, H21
3954414 ..... HNGJ0704ANFNLDJ TN6501 ......... H8,
H16, H21
3954416 ..... XNGJ0704ANFNLDJ3W TN6501 ... H17
3954418 ..... HNGJ0704ANENLD TN6505 ........... H8,
H16, H21
3954419 ..... HNGJ0704ANENLD TN6510 ........... H8,
H16, H21
3954420 ..... HNGJ0704ANENLD TN6520 ........... H8,
H16, H21
3954421 ..... HNGJ0704ANENLD TN6525 ........... H8,
H16, H21
3954422 ..... HNGJ0704ANENLD TN6540 ........... H8,
H16, H21
3954424 ..... XNGJ0704ANENLD3W TN6510 ..... H17
3954425 ..... XNGJ0704ANENLD3W TN6520 ..... H17
3954426 ..... XNGJ0704ANENLD3W TN6525 ..... H17
3954427 ..... XNGJ0704ANENLD3W TN6540 ..... H17
3954428 ..... HNGJ070432ANENLD TN6510 ....... H8,
H16, H21
3954429 ..... HNGJ070432ANENLD TN6525 ....... H8,
H16, H21
3954430 ..... HNGJ070432ANENLD TN6540 ....... H8,
H16, H21
3954432 ..... HNPJ0704ANSNGD TN6510 .......... H9,
H17, H22
3954433 ..... XNGJ0704ANFNLDJ3W THM-U ..... H17
3954473 ..... HNPJ0704ANSNGD TN6520 .......... H9,
H17, H22
3954474 ..... HNPJ0704ANSNGD TN6540 .......... H9,
H17, H22
3954475 ..... HNPJ0704ANSNGD TN7535 .......... H9,
H17, H22
3954477 ..... HNPJ0704ANSNHD TN6510........... H9,
H17, H22
3954478 ..... HNPJ0704ANSNHD TN6520........... H9,
H17, H22
3954479 ..... HNPJ0704ANSNHD TN6540........... H9,
H17, H22
3954480 ..... HNPJ0704ANSNHD TN7535........... H9,
H17, H22
3954481 ..... HNPJ070432ANSNHD TN6510 ...... H9,
H17, H22
3954482 ..... HNPJ070432ANSNHD TN6520 ...... H9,
H17, H22
3954483 ..... HNPJ070432ANSNHD TN6540 ...... H9,
H17, H22
3954484 ..... HNPJ070432ANSNHD TN7535 ...... H9,
H17, H22
3954792 ..... M4000CA-HN09HF ....................... H73
3954929 ..... GT305097 GP6520 ........................Y20
3954930 ..... GT305098 GP6520 ........................Y20
3954931 ..... GT305099 GP6520 ........................Y20
3954932 ..... GT305100 GP6520 ........................Y20
3955023 ..... GT305101 GP6520 ........................Y20
3955024 ..... GT305102 GP6520 ........................Y20
3955025 ..... GT305103 GP6520 ........................Y20
3955026 ..... GT305104 GP6520 ........................Y20
3955027 ..... GT305105 GP6520 ........................Y20
3955028 ..... GT305106 GP6520 ........................Y20
3955029 ..... GT305107 GP6520 ........................Y20
3955030 ..... GT305108 GP6520 ........................Y20
3955031 ..... GT305109 GP6520 ........................Y20
3955032 ..... GT305110 GP6520 ........................Y20
3955033 ..... GT305111 GP6520 ........................Y20
3955034 ..... GT305112 GP6520 ........................Y20
3955035 ..... GT305113 GP6520 ........................Y20
3955036 ..... GT305114 GP6520 ........................Y20
3955037 ..... GT305115 GP6520 ........................Y20
3955038 ..... GT215001 GM6515 .........................Y6
3955039 ..... GT215002 GM6515 .........................Y6
3955040 ..... GT215003 GM6515 .........................Y6
3955041 ..... GT215004 GM6515 .........................Y6
3955042 ..... GT215005 GM6515 .........................Y6
3955047 ..... GT205077 GM6515 .........................Y4
3955048 ..... GT205078 GM6515 .........................Y4
3955049 ..... GT205079 GM6515 .........................Y4
3955050 ..... GT205080 GM6515 .........................Y4
3955051 ..... GT205081 GM6515 .........................Y4
3955052 ..... GT205082 GM6515 .........................Y4
3955053 ..... GT215006 GM6515 .........................Y6
3955054 ..... GT215007 GP6520 ..........................Y6
3955055 ..... GT215008 GP6520 ..........................Y6
3955056 ..... GT215009 GP6520 ..........................Y6
3955057 ..... GT215010 GP6520 ..........................Y6
3955058 ..... GT215011 GP6520 ..........................Y6
3955059 ..... GT215012 GP6520 ..........................Y6
3955073 ..... GT205083 GM6515 .........................Y4
3955074 ..... GT205084 GM6515 .........................Y4
3955075 ..... GT205085 GM6515 .........................Y4
3955076 ..... GT205086 GM6515 .........................Y4
3955077 ..... GT205087 GM6515 .........................Y4
3955078 ..... GT205088 GM6515 .........................Y4
3955079 ..... GT205089 GM6515 .........................Y4
3955080 ..... GT205090 GM6515 .........................Y4
3955081 ..... GT205091 GM6515 .........................Y4
3955082 ..... GT205092 GM6515 .........................Y4
3955083 ..... GT205093 GM6515 .........................Y4
3955084 ..... GT205094 GP6520 ..........................Y4
3955085 ..... GT205095 GP6520 ..........................Y4
3955086 ..... GT205096 GP6520 ..........................Y4
3955087 ..... GT205097 GP6520 ..........................Y4
3955088 ..... GT205098 GP6520 ..........................Y4
3955089 ..... GT205099 GP6520 ..........................Y4
3955090 ..... GT205100 GP6520 ..........................Y4
3955091 ..... GT205101 GP6520 ..........................Y4
3955092 ..... GT205102 GP6520 ..........................Y4
3955098 ..... GT305148 GM6515 .......................Y20
3955099 ..... GT305079 GM6515 .......................Y20
3955100 ..... GT305080 GM6515 .......................Y20
3955101 ..... GT305081 GM6515 .......................Y20
3955102 ..... GT305082 GM6515 .......................Y20
3955103 ..... GT305083 GM6515 .......................Y20
3955104 ..... GT305084 GM6515 .......................Y20
3955105 ..... GT305085 GM6515 .......................Y20
3955106 ..... GT305086 GM6515 .......................Y20
3955107 ..... GT305087 GM6515 .......................Y20
3955108 ..... GT305088 GM6515 .......................Y20
3955109 ..... GT305089 GM6515 .......................Y20
3955110 ..... GT305090 GM6515 .......................Y20
3955111 ..... GT305091 GM6515 .......................Y20
3955112 ..... GT305092 GM6515 .......................Y20
3955113 ..... GT305093 GM6515 .......................Y20
3955114 ..... GT305094 GM6515 .......................Y20
3955115 ..... GT305095 GM6515 .......................Y20
3955116 ..... GT305096 GM6515 .......................Y20
3955123 ..... GT205103 GP6520 ..........................Y4
3955124 ..... GT205104 GP6520 ..........................Y4
3955125 ..... GT205105 GP6520 ..........................Y4
3955126 ..... GT205106 GP6520 ..........................Y4
3955127 ..... GT205107 GP6520 ..........................Y4
3955128 ..... GT205108 GP6520 ..........................Y4
3955129 ..... GT205109 GP6520 ..........................Y4
3955130 ..... GT205110 GP6520 ..........................Y4
3955343 ..... GT315001 GM6515 .......................Y22
3955344 ..... GT315002 GM6515 .......................Y22
3955345 ..... GT315003 GM6515 .......................Y22
3955346 ..... GT315004 GM6515 .......................Y22
3955347 ..... GT315005 GM6515 .......................Y22
3955348 ..... GT315006 GM6515 .......................Y22
3955349 ..... GT315007 GP6520 ........................Y22
3955350 ..... GT315008 GP6520 ........................Y22
3955351 ..... GT315009 GP6520 ........................Y22
3955352 ..... GT315010 GP6520 ........................Y22
3955373 ..... GT315011 GP6520 ........................Y22
3955374 ..... GT315012 GP6520 ........................Y22
3955463 ..... KM40TSS10DLSEL11 ............. F76–77
3955464 ..... KM40TSS10DLSER11 ............. F76–77
3955465 ..... KM40TSS12ELSEL11 .............. F76–77
3955466 ..... KM40TSS12ELSER11 .............. F76–77
3955467 ..... KM40TSS16FLSEL16 .............. F76–77
3955468 ..... KM40TSS16FLSER16 .............. F76–77
3955469 ..... KM40TSS20GLSEL16 ............. F76–77
3955470 ..... KM40TSS20GLSER16 ............. F76–77
3955471 ..... KM40TSS25HLSEL16 .............. F76–77
3955472 ..... KM40TSS25HLSER16 ............. F76–77
3955473 ..... KM40TSS32JLSEL16 .............. F76–77
3955474 ..... KM40TSS32JLSER16 .............. F76–77
3955475 ..... KM40TSS32JLSEL22 .............. F76–77
3955476 ..... KM40TSS32JLSER22 .............. F76–77
3955480 ..... KM40TSS12ENEL2.................. F33–34
3955481 ..... KM40TSS12ENER2 ................. F33–34
3955482 ..... KM40TSS16FNEL2 .................. F33–34
3955483 ..... KM40TSS16FNER2 ................. F33–34
3955484 ..... KM40TSS20GNEL2 ................. F33–34
3955485 ..... KM40TSS20GNER2 ................. F33–34
3955486 ..... KM40TSS25ENEL2.................. F33–34
3955487 ..... KM40TSS25ENER2 ................. F33–34
3955488 ..... KM40TSS25HNEL2 ................. F33–34
3955489 ..... KM40TSS25HNER2 ................. F33–34
3955490 ..... KM40TSS25ENEL3.................. F33–34
3955491 ..... KM40TSS25ENER3 ................. F33–34
3955492 ..... KM40TSS25HNEL3 ................. F33–34
3955493 ..... KM40TSS25HNER3 ................. F33–34
3955494 ..... KM40TSS32JNEL3 .................. F33–34
3955495 ..... KM40TSS32JNER3 ................. F33–34
3955496 ..... KM40TSS32GNEL3 ................. F33–34
3955497 ..... KM40TSS32GNER3 ................. F33–34
3957839 ..... M1200D025Z02M16HN07 ........... H12
3957840 ..... M1200D025Z03M16HN07 ........... H12
3957841 ..... M1200D032Z03M16HN07 ........... H12
3957842 ..... M1200D032Z04M16HN07 ........... H12
3957963 ..... M1200D040Z04M16HN07 ........... H12
3957964 ..... M1200D040Z05M16HN07 ........... H12
3957969 ..... M1200HF160Z12HN09 ................. H26
3957970 ..... M1200D040Z03HN09 .................. H31
3957971 ..... M1200D040Z04HN09 ............H31–32
3957972 ..... M1200D200Z16HN09 ............H31–32
3957993 ..... M1200D250Z20HN09 ............H31–32
3957994 ..... M1200D315Z24HN09 ............H31–32
3957995 ..... M1200D040Z04HN07 .................. H15
3957996 ..... M1200D040Z05HN07 .................. H15
3957997 ..... M1200D050Z04HN07 .................. H15
3957998 ..... M1200D050Z05HN07 .................. H15
3957999 ..... M1200D050Z06HN07 .................. H15
3958000 ..... M1200D063Z04HN07 .................. H15
3958001 ..... M1200D063Z06HN07 .................. H15
3958002 ..... M1200D063Z08HN07 .................. H15
3958003 ..... M1200D080Z05HN07 .................. H15
3958004 ..... M1200D080Z08HN07 .................. H15
3958005 ..... M1200D080Z10HN07 .................. H15
3958006 ..... M1200D100Z06HN07 .................. H15
3958007 ..... M1200D100Z09HN07 .................. H15
3958008 ..... M1200D100Z12HN07 .................. H15
3958011 ..... M1200D025Z02B20HN07 ............ H13
3958012 ..... M1200D025Z03B20HN07 ............ H13
3958023 ..... M1200D032Z03B25HN07 ............ H13
3958024 ..... M1200D032Z04B25HN07 ............ H13
3958025 ..... M1200D025Z02A20HN07L120 .... H14
3958026 ..... M1200D025Z03A20HN07L120 .... H14
3958027 ..... M1200D032Z03A25HN07L130 .... H14
3958028 ..... M1200D032Z04A25HN07L130 .... H14
3958029 ..... M1200D025Z02A25HN07L200 .... H14
3958030 ..... M1200D025Z03A25HN07L200 .... H14
3959398 ..... KM40TSLSEL27N ...........................F71
3959399 ..... KM40TSLSER27N ..........................F71
3959400 ..... KM40TSLSSL27 .............................F72
3959401 ..... KM40TSLSSR27.............................F72
3959579 ..... RDPX1003M0SNMH TN6540 ........M56
3959580 ..... RDPX1003M0SNMH TN6525 ........M56
3959581 ..... RDPX1003M0SNMH TN2505 ........M56
3959582 ..... RDPX1003M0SNMM TN6540 .......M56
3959620 ..... RDPX12T3M0SNMH TN6540 ........M63
3959621 ..... RDPX12T3M0SNMH TN6525 ........M63
3959622 ..... RDPX12T3M0SNMH TN2505 ........M63
3959623 ..... RDPX12T3M0SNMM TN6540........M63
3959624 ..... RDPX12T3M0SNMM TN6525........M63
3959625 ..... RDPX0702M0SNMH TN6540 ........M49
3959626 ..... RDPX0702M0SNMH TN6525 ........M49
3959627 ..... RDPX0702M0SNMH TN2505 ........M49
3959633 ..... RDPX1003M0SNMM TN6525 .......M56
3960462 ..... RDPX1604M0SNMH TN6540 ........M68
3960513 ..... RDPX1604M0SNMH TN6525 ........M68
3960514 ..... RDPX1604M0SNMH TN2505 ........M68
3960515 ..... RDPX1604M0SNMM TN6540 .......M68
3960516 ..... RDPX1604M0SNMM TN6525 .......M68
3960532 ..... RDHX07T1M0SNMH TN6540 ........M44
3960573 ..... RDHX07T1M0SNMH TN6525 ........M44
3960578 ..... RDHX07T1M0SNMH TN2505 ........M44
3964909 ..... 12146111200 .............................. H32
3964910 ..... 12146111300 .............................. H32
Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 32 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRANDO b 28 20153 09PM
Z33
widia.com
Index by Order Number
Order No. Catalogue No. Page(s)
3964911 ..... 12146111400 .............................. H32
3964954 ..... 12146109200 ..............H15, H20, H32
3968124 ..... M4000CA-HN07 ........................... H73
3969291 ..... TDM2150UPM WU25PD ................ U15
3992013 ..... TDM2599UPM WU25PD ................ U15
3992070 ..... TDM210R3SCF25M WG .................. U6
3992071 ..... TDM220R3SCF25M WG .................. U6
3992072 ..... TDM230R3SCF25M WG .................. U6
3992141 ..... TDM080R8SCF12M WG .................. U8
3992142 ..... TDM085R8SCF12M WG .................. U8
3992213 ..... TDM090R8SCF12M WG .................. U8
3992214 ..... TDM095R8SCF12M WG .................. U8
3992215 ..... TDM100R8SCF16M WG .................. U8
3992216 ..... TDM105R8SCF16M WG .................. U8
3992217 ..... TDM110R8SCF16M WG .................. U8
3992218 ..... TDM115R8SCF16M WG .................. U8
3992219 ..... TDM120R8SCF16M WG .................. U8
3992220 ..... TDM125R8SCF16M WG .................. U8
3992221 ..... TDM130R8SCF16M WG .................. U8
3992222 ..... TDM135R8SCF16M WG .................. U8
3992223 ..... TDM140R8SCF16M WG .................. U8
3992224 ..... TDM145R8SCF16M WG .................. U8
3992225 ..... TDM150R8SCF20M WG .................. U8
3992226 ..... TDM160R8SCF20M WG .................. U8
3992227 ..... TDM170R8SCF20M WG .................. U8
3992228 ..... TDM180R8SCF25M WG .................. U8
3992229 ..... TDM190R8SCF25M WG .................. U8
3992230 ..... TDM200R8SCF25M WG .................. U8
3992231 ..... TDM210R8SCF25M WG .................. U8
3992232 ..... TDM220R8SCF25M WG .................. U8
3992233 ..... TDM230R8SCF25M WG .................. U8
3992234 ..... TDM240R8SCF25M WG .................. U8
3992235 ..... TDM250R8SCF25M WG .................. U8
3992483 ..... TDM240R3SCF25M WG .................. U6
3992484 ..... TDM250R3SCF25M WG .................. U6
3992485 ..... TDM210R5SCF25M WG .................. U7
3992486 ..... TDM220R5SCF25M WG .................. U7
3992487 ..... TDM230R5SCF25M WG .................. U7
3992488 ..... TDM240R5SCF25M WG .................. U7
3992489 ..... TDM250R5SCF25M WG .................. U7
3998454 ..... TDS503A07600 WU25PD ..............T92
3998456 ..... TDS503A11110 WU25PD ..............T93
3998686 ..... 12146120500 .......H7, H15, H20, H26,
H38, J8, M6, M12
4002444 ..... TDM2550UPM WU25PD ................ U15
4003203 ..... TDM2144UPM WU25PD ................ U15
4003204 ..... TDM2223UPM WU25PD ................ U15
4003205 ..... TDM2245UPM WU25PD ................ U15
4003206 ..... TDM2381UPM WU25PD ................ U15
4003207 ..... TDM2461UPM WU25PD ................ U15
4003208 ..... TDM2540UPM WU25PD ................ U15
4003209 ..... TDM2568UPM WU25PD ................ U15
4003210 ..... TDM2581UPM WU25PD ................ U15
4003225 ..... TDM2100UPM WU25PD ................ U14
4003226 ..... TDM2200UPM WU25PD ................ U15
4003227 ..... TDM2250UPM WU25PD ................ U15
4003228 ..... TDM2300UPM WU25PD ................ U15
4003229 ..... TDM2350UPM WU25PD ................ U15
4003230 ..... TDM2400UPM WU25PD ................ U15
4003231 ..... TDM2450UPM WU25PD ................ U15
4003232 ..... TDM2500UPM WU25PD ................ U15
4004710 ..... CM215R ASSY ................C17–18, C58
4008276 ..... M370D050Z05WO08 .....................M6
4008277 ..... M370D066Z06WO08 .....................M6
4008281 ..... M370D025Z02A25WO08L200 .......M5
4010625 ..... TDM1618UPM WU25PD ................ U13
4033659 ..... GT415001 GP6520 ........................Y53
4033660 ..... GT415002 GP6520 ........................Y53
4033661 ..... GT415003 GP6520 ........................Y53
4033662 ..... GT415004 GP6520 ........................Y53
4033699 ..... GT405001 GP6520 ........................Y52
4033700 ..... GT405002 GP6520 ........................Y52
4033701 ..... GT405003 GP6520 ........................Y52
4033702 ..... GT405004 GP6520 ........................Y52
4033723 ..... GT205111 GP6520 ..........................Y4
4033725 ..... GT205113 GP6520 ..........................Y4
4033726 ..... GT205114 GP6520 ..........................Y4
4033728 ..... GT205116 GP6520 ..........................Y4
4033730 ..... GT205118 GP6520 ..........................Y4
4033733 ..... GT305161 GP6520 ........................Y20
4033735 ..... GT305163 GP6520 ........................Y20
4033736 ..... GT305164 GP6520 ........................Y20
4033738 ..... GT305166 GP6520 ........................Y20
4033740 ..... GT305168 GP6520 ........................Y20
4033744 ..... GT315025 GP6520 ........................Y22
4033746 ..... GT315027 GP6520 ........................Y22
4033747 ..... GT315028 GP6520 ........................Y22
4033749 ..... GT315030 GP6520 ........................Y22
4033751 ..... GT315032 GP6520 ........................Y22
4033753 ..... GT405005 GP6520 ........................Y52
4033754 ..... GT405006 GP6520 ........................Y52
4033755 ..... GT405007 GP6520 ........................Y52
4033756 ..... GT405008 GP6520 ........................Y52
4033757 ..... GT405009 GP6520 ........................Y52
4033758 ..... GT405010 GP6520 ........................Y52
4033759 ..... GT405011 GP6520 ........................Y52
4033765 ..... GT205122 GP6520 ..........................Y5
4033767 ..... GT205124 GP6520 ..........................Y5
4033768 ..... GT205125 GP6520 ..........................Y5
4033770 ..... GT205127 GP6520 ..........................Y5
4033772 ..... GT205129 GP6520 ..........................Y5
4033776 ..... GT305151 GP6520 ........................Y21
4033778 ..... GT305153 GP6520 ........................Y21
4033779 ..... GT305154 GP6520 ........................Y21
4033781 ..... GT305156 GP6520 ........................Y21
4033783 ..... GT305158 GP6520 ........................Y21
4033787 ..... GT315014 GP6520 ........................Y23
4033789 ..... GT315016 GP6520 ........................Y23
4033790 ..... GT315017 GP6520 ........................Y23
4033792 ..... GT315019 GP6520 ........................Y23
4033794 ..... GT315021 GP6520 ........................Y23
4033813 ..... GT415005 GP6520 ........................Y53
4033814 ..... GT415006 GP6520 ........................Y53
4033815 ..... GT415007 GP6520 ........................Y53
4033816 ..... GT415008 GP6520 ........................Y53
4033817 ..... GT415009 GP6520 ........................Y53
4033818 ..... GT415010 GP6520 ........................Y53
4035066 ..... GT305116 GP6505 ........................Y20
4035067 ..... GT305117 GP6505 ........................Y20
4035068 ..... GT305118 GP6505 ........................Y20
4035069 ..... GT305119 GP6505 ........................Y20
4035070 ..... GT305120 GP6505 ........................Y20
4035071 ..... GT305121 GP6505 ........................Y20
4035072 ..... GT305122 GP6505 ........................Y20
4035073 ..... GT305123 GP6505 ........................Y20
4035074 ..... GT305124 GP6505 ........................Y20
4051233 ..... TDS501A03455 WU25PD ..............T82
4051234 ..... TDS501A03175 WU25PD ..............T82
4051235 ..... TDS501A13100 WU25PD ..............T85
4051236 ..... TDS502A03455 WU25PD ..............T87
4051237 ..... TDS502A03175 WU25PD ..............T87
4051238 ..... TDS502A13100 WU25PD ..............T90
4051239 ..... TDS503A03100 WU25PD ..............T91
4051240 ..... TDS503A03175 WU25PD ..............T91
4051241 ..... TDS503A03200 WU25PD ..............T91
4051242 ..... TDS503A03250 WU25PD ..............T91
4051243 ..... TDS503A03400 WU25PD ..............T91
4051244 ..... TDS503A03455 WU25PD ..............T91
4051245 ..... TDS503A03900 WU25PD ..............T91
4051246 ..... TDS503A04100 WU25PD ..............T91
4051247 ..... TDS503A04300 WU25PD ..............T91
4051248 ..... TDS503A04400 WU25PD ..............T91
4051249 ..... TDS503A04600 WU25PD ..............T91
4051250 ..... TDS503A04650 WU25PD ..............T91
4051251 ..... TDS503A04900 WU25PD ..............T92
4051252 ..... TDS503A05100 WU25PD ..............T92
4051253 ..... TDS503A05200 WU25PD ..............T92
4051254 ..... TDS503A05300 WU25PD ..............T92
4051255 ..... TDS503A05400 WU25PD ..............T92
4051256 ..... TDS503A05550 WU25PD ..............T92
4051257 ..... TDS503A05600 WU25PD ..............T92
4051258 ..... TDS503A05700 WU25PD ..............T92
4051259 ..... TDS503A05900 WU25PD ..............T92
4051260 ..... TDS503A06100 WU25PD ..............T92
4051261 ..... TDS503A06200 WU25PD ..............T92
4051262 ..... TDS503A06300 WU25PD ..............T92
4051263 ..... TDS503A06400 WU25PD ..............T92
4051264 ..... TDS503A06600 WU25PD ..............T92
4051265 ..... TDS503A06700 WU25PD ..............T92
4051266 ..... TDS503A06900 WU25PD ..............T92
4051267 ..... TDS503A07100 WU25PD ..............T92
4051268 ..... TDS503A07200 WU25PD ..............T92
4051269 ..... TDS503A07300 WU25PD ..............T92
4051270 ..... TDS503A07400 WU25PD ..............T92
4051271 ..... TDS503A07700 WU25PD ..............T92
4051272 ..... TDS503A07900 WU25PD ..............T92
4051273 ..... TDS503A08100 WU25PD ..............T93
4051274 ..... TDS503A08200 WU25PD ..............T93
4051275 ..... TDS503A08300 WU25PD ..............T93
4051276 ..... TDS503A08400 WU25PD ..............T93
4051277 ..... TDS503A08600 WU25PD ..............T93
4051278 ..... TDS503A08700 WU25PD ..............T93
4051279 ..... TDS503A08800 WU25PD ..............T93
4051280 ..... TDS503A08900 WU25PD ..............T93
4051281 ..... TDS503A09100 WU25PD ..............T93
4051282 ..... TDS503A09200 WU25PD ..............T93
4051283 ..... TDS503A09300 WU25PD ..............T93
4051284 ..... TDS503A09400 WU25PD ..............T93
4051285 ..... TDS503A09600 WU25PD ..............T93
4051286 ..... TDS503A09700 WU25PD ..............T93
4051287 ..... TDS503A09900 WU25PD ..............T93
4051288 ..... TDS503A10100 WU25PD ..............T93
4051289 ..... TDS503A10300 WU25PD ..............T93
4051290 ..... TDS503A10400 WU25PD ..............T93
4051291 ..... TDS503A10600 WU25PD ..............T93
4051292 ..... TDS503A10700 WU25PD ..............T93
4051293 ..... TDS503A10900 WU25PD ..............T93
4051294 ..... TDS503A11100 WU25PD ..............T93
4051295 ..... TDS503A11200 WU25PD ..............T93
4051296 ..... TDS503A11300 WU25PD ..............T94
4051297 ..... TDS503A11400 WU25PD ..............T94
4051298 ..... TDS503A11600 WU25PD ..............T94
4051299 ..... TDS503A11700 WU25PD ..............T94
4051300 ..... TDS503A11900 WU25PD ..............T94
4051301 ..... TDS503A13100 WU25PD ..............T94
4051302 ..... TDS503A16500 WU25PD ..............T94
4051303 ..... TDS503A16670 WU25PD ..............T94
4051304 ..... TDS503A16800 WU25PD ..............T94
4051305 ..... TDS503A17000 WU25PD ..............T94
4051306 ..... TDS503A17500 WU25PD ..............T94
4051307 ..... TDS503A17800 WU25PD ..............T94
4051308 ..... TDS503A18000 WU25PD ..............T94
4051309 ..... TDS503A18500 WU25PD ..............T94
4051310 ..... TDS503A18800 WU25PD ..............T94
4051311 ..... TDS503A19000 WU25PD ..............T94
4051312 ..... TDS503A19050 WU25PD ..............T94
4051313 ..... TDS503A19500 WU25PD ..............T94
4051314 ..... TDS503A19800 WU25PD ..............T94
4051315 ..... TDS503A20000 WU25PD ..............T94
4052411 ..... WOEJ080412SRMH TN6525...........M7
4056186 ..... M370D025Z02M12WO08 ..............M4
4056187 ..... M370D032Z04M16WO08 ..............M4
4056188 ..... M370D042Z05M16WO08 ..............M4
4056189 ..... M370D025Z03A25WO08L150 .......M5
4056190 ..... M370D028Z03A25WO08L200 .......M5
4056191 ..... M370D032Z04A32WO08L150 .......M5
4056192 ..... M370D032Z04A32WO08L200 .......M5
4056193 ..... M370D040Z04WO08 .....................M6
4056194 ..... M370D052Z05WO08 .....................M6
4056195 ..... M370D063Z06WO08 .....................M6
4067705 ..... 47N606002LW TIALN-LW .............. O11
4067706 ..... 47N608003LW TIALN-LW .............. O11
4067707 ..... 47N610004LW TIALN-LW .............. O11
4067708 ..... 47N612005LW TIALN-LW .............. O11
4067709 ..... 47N616006LW TIALN-LW .............. O11
4067710 ..... 47N620007LW TIALN-LW .............. O11
4068517 ..... WOEJ080412SRMH TN7535...........M7
4113563 ..... WMTS300M3P03PT WU10PT ........E19
4113564 ..... WMTS300M3P03PT WU25PT ........E19
4113565 ..... WMTS300M3P06PT WU10PT ........E19
4113566 ..... WMTS300M3P03PT WU10HT ........E19
4113567 ..... WMTS300M3P06PT WU25PT ........E19
4113568 ..... WMTS305M3U03PT WU10PT ........E18
4113569 ..... WMTS305M3U03PT WU25PT ........E18
4113570 ..... WMTS305M3U06PT WU10PT ........E18
4113571 ..... WMTS305M3U06PT WU25PT ........E18
4113572 ..... WMTS400M4P03PT WU10PT ........E19
4113573 ..... WMTS400M4P03PT WU10HT ........E19
4113574 ..... WMTS400M4P03PT WU25PT ........E19
4113575 ..... WMTS400M4P06PT WU10PT ........E20
4113576 ..... WMTS400M4P06PT WU25PT ........E20
4113577 ..... WMTS405M4U03PT WU10PT ........E18
4113578 ..... WMTS405M4U03PT WU25PT ........E18
4113579 ..... WMTS405M4U06PT WU10PT ........E18
4113580 ..... WMTS405M4U06PT WU25PT ........E18
4113892 ..... WOEJ080412SRMM TN6525 ..........M7
4113916 ..... WOEJ080412SRMM TN7535 ..........M7
4116129 ..... WMTS200M2P02PT WU10PT ........E19
4116130 ..... WMTS200M2P02PT WU25PT ........E19
4116131 ..... WMTS205M2U02PT WU10PT ........E18
4116132 ..... WMTS205M2U02PT WU25PT ........E18
4116143 ..... WMTS500M5P03PT WU10PT ........E20
4116144 ..... WMTS500M5P03PT WU25PT ........E20
4116145 ..... WMTS500M5P03PT WU10HT ........E20
4116146 ..... WMTS500M5P06PT WU10PT ........E20
4116147 ..... WMTS500M5P06PT WU25PT ........E20
4116148 ..... WMTS505M5U03PT WU10PT ........E18
4116149 ..... WMTS505M5U03PT WU25PT ........E18
4116150 ..... WMTS505M5U06PT WU10PT ........E18
4116151 ..... WMTS505M5U06PT WU25PT ........E18
4117239 ..... WMTS600M6P03PT WU10PT ........E20
4117240 ..... WMTS600M6P03PT WU25PT ........E20
4117241 ..... WMTS600M6P06PT WU10PT ........E20
4117242 ..... WMTS600M6P06PT WU25PT ........E20
Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 33 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRAND O b 28 2015 3 09 PM
Z34 widia.com
Index by Order Number
Order No. Catalogue No. Page(s)
4117253 ..... WMTS605M6U03PT WU10PT ........E18
4117254 ..... WMTS605M6U03PT WU25PT ........E18
4117255 ..... WMTS605M6U06PT WU10PT ........E18
4117256 ..... WMTS605M6U06PT WU25PT ........E18
4117257 ..... WMTS800M8P06PT WU10PT ........E21
4117258 ..... WMTS800M8P06PT WU25PT ........E21
4117259 ..... WMTS800M8P15PT WU10PT ........E21
4117260 ..... WMTS800M8P15PT WU25PT ........E21
4117261 ..... WMTS805M8U06PT WU10PT ........E18
4117262 ..... WMTS805M8U06PT WU25PT ........E18
4117263 ..... WMTS805M8U15PT WU10PT ........E18
4117264 ..... WMTS805M8U15PT WU25PT ........E18
4118451 ..... WMTS094I2BP02PT WU10PT ........E19
4118452 ..... WMTS094I2BP02PT WU25PT ........E19
4118583 ..... WMTS094I2BP04PT WU10PT ........E19
4118584 ..... WMTS094I2BP04PT WU25PT ........E19
4118585 ..... WMTS125I3P03PT WU10PT ..........E19
4118586 ..... WMTS125I3P03PT WU25PT ..........E19
4118587 ..... WMTS125I3P08PT WU10PT ..........E19
4118588 ..... WMTS125I3P08PT WU25PT ..........E19
4118589 ..... WMTS188I5P03PT WU10PT ..........E20
4118590 ..... WMTS188I5P03PT WU25PT ..........E20
4118591 ..... WMTS188I5P08PT WU10PT ..........E20
4118592 ..... WMTS188I5P08PT WU25PT ..........E20
4118593 ..... WMTS250I6P03PT WU10PT ..........E21
4118594 ..... WMTS250I6P03PT WU25PT ..........E21
4118595 ..... WMTS250I6P08PT WU10PT ..........E21
4118596 ..... WMTS250I6P08PT WU25PT ..........E21
4124297 ..... 571810004MT ALTIN-MT .............. O38
4124298 ..... 571812005MT ALTIN-MT .............. O38
4124299 ..... 571814014MT ALTIN-MT .............. O38
4124300 ..... 571816006MT ALTIN-MT .............. O38
4124301 ..... 571818018MT ALTIN-MT .............. O39
4124302 ..... 571820007MT ALTIN-MT .............. O39
4124323 ..... 571825008MT ALTIN-MT .............. O39
4136343 ..... M4000D125Z06ADJ ..................... H72
4136344 ..... M4000D125Z08ADJ ..................... H72
4136345 ..... M4000D160Z08ADJ ..................... H72
4136346 ..... M4000D160Z12ADJ ..................... H72
4136347 ..... M4000D200Z10ADJ ..................... H72
4136348 ..... M4000D200Z14ADJ ..................... H72
4136349 ..... M4000D250Z12ADJ ..................... H72
4136350 ..... M4000D250Z18ADJ ..................... H72
4136351 ..... M4000D315Z16ADJ ..................... H72
4136352 ..... M4000D315Z22ADJ ..................... H72
4136480 ..... WOEJ080412SRMH TN6520...........M7
4136482 ..... M1200HD040Z04HN07 ................ H20
4136863 ..... M1200HD040Z05HN07 ................ H20
4136864 ..... M1200HD050Z04HN07 ................ H20
4136865 ..... M1200HD050Z05HN07 ................ H20
4136866 ..... M1200HD063Z04HN07 ................ H20
4136867 ..... M1200HD063Z06HN07 ................ H20
4136868 ..... M1200HD080Z05HN07 ................ H20
4136869 ..... M1200HD080Z08HN07 ................ H20
4136870 ..... M1200HD100Z06HN07 ................ H20
4136871 ..... M1200HD100Z09HN07 ................ H20
4136872 ..... M1200HD125Z08HN07 ................ H20
4136873 ..... M1200HD125Z12HN07 ................ H20
4136874 ..... M1200HF025Z02M16HN07 ........... H5
4136875 ..... M1200HF025Z03M16HN07 ........... H5
4136876 ..... M1200HF032Z03M16HN07 ........... H5
4136877 ..... M1200HF032Z04M16HN07 ........... H5
4136878 ..... M1200HF040Z04M16HN07 ........... H5
4136879 ..... M1200HF040Z05M16HN07 ........... H5
4136880 ..... M1200HF025Z02A20HN07L120 .... H6
4136881 ..... M1200HF025Z03A20HN07L120 .... H6
4136882 ..... M1200HF032Z03A25HN07L130 .... H6
4136883 ..... M1200HF032Z04A25HN07L130 .... H6
4136884 ..... M1200HF040Z05HN07 ................... H7
4136885 ..... M1200HF050Z05HN07 ................... H7
4136886 ..... M1200HF063Z06HN07 ................... H7
4136887 ..... M1200HF080Z08HN07 ................... H7
4138391 ..... GTM115001 WU13PV ....................Y69
4138392 ..... GTM115002 WU13PV ....................Y69
4138470 ..... M1200D125Z08HN07 .................. H15
4138471 ..... M1200D125Z12HN07 .................. H15
4138472 ..... M1200D125Z16HN07 .................. H15
4138493 ..... GTM115003 WU13PV ....................Y69
4138494 ..... GTM115004 WU13PV ....................Y69
4138495 ..... GTM115005 WU13PV ....................Y69
4138496 ..... GTM115006 WU13PV ....................Y69
4138497 ..... GTM115007 WU13PV ....................Y69
4138498 ..... GTM115008 WU13PV ....................Y69
4138499 ..... GTM115009 WU13PV ....................Y69
4138500 ..... GTM115010 WU13PV ....................Y69
4138501 ..... GTM115011 WU13PV ....................Y69
4138502 ..... GTM115012 WU13PV ....................Y69
4138503 ..... GTM115013 WU13PV ....................Y69
4138504 ..... GTM115014 WU13PV ....................Y69
4138505 ..... GTM115015 WU13PV ....................Y69
4138506 ..... GTM115016 WU13PV ....................Y69
4138507 ..... GTM115017 WU13PV ....................Y69
4138508 ..... GTM115018 WU13PV ....................Y69
4138509 ..... GTM115019 WU13PV ....................Y69
4138510 ..... GTM115020 WU13PV ....................Y69
4138511 ..... GTM115021 WU13PV ....................Y69
4138512 ..... GTM115022 WU13PV ....................Y69
4138513 ..... GTM115023 WU13PV ....................Y69
4138514 ..... GTM215001 WU12PV ....................Y71
4138515 ..... GTM215002 WU12PV ....................Y71
4138516 ..... GTM215003 WU12PV ....................Y71
4138517 ..... GTM215004 WU12PV ....................Y71
4138518 ..... GTM215005 WU12PV ....................Y71
4138519 ..... GTM215006 WU12PV ....................Y71
4138520 ..... GTM215007 WU12PV ....................Y71
4138521 ..... GTM215008 WU12PV ....................Y71
4138522 ..... GTM215009 WU12PV ....................Y71
4138523 ..... GTM215010 WU12PV ....................Y71
4138524 ..... GTM215011 WU12PV ....................Y71
4138525 ..... GTM215012 WU12PV ....................Y71
4138526 ..... GTM215013 WU12PV ....................Y71
4138527 ..... GTM215014 WU12PV ....................Y71
4138528 ..... GTM215015 WU12PV ....................Y71
4138529 ..... GTM215016 WU12PV ....................Y71
4138530 ..... GTM215017 WU12PV ....................Y70
4138531 ..... GTM215018 WU12PV ....................Y70
4138532 ..... GTM215019 WU12PV ....................Y70
4138533 ..... GTM215020 WU12PV ....................Y70
4138534 ..... GTM215021 WU12PV ....................Y70
4138535 ..... GTM215022 WU12PV ....................Y70
4138536 ..... GTM215023 WU12PV ....................Y70
4138537 ..... GTM215024 WU12PV ....................Y70
4138538 ..... GTM215025 WU12PV ....................Y70
4138539 ..... GTM215026 WU12PV ....................Y70
4138540 ..... GTM215027 WU12PV ....................Y70
4138541 ..... GTM215028 WU12PV ....................Y70
4138542 ..... GTM215029 WU12PV ....................Y70
4138543 ..... GTM215030 WU12PV ....................Y70
4138544 ..... GTM215031 WU12PV ....................Y70
4138545 ..... GTM315001 WU12PV ....................Y73
4138546 ..... GTM315002 WU12PV ....................Y73
4138547 ..... GTM315003 WU12PV ....................Y73
4138548 ..... GTM315004 WU12PV ....................Y73
4138549 ..... GTM315005 WU12PV ....................Y73
4138550 ..... GTM315006 WU12PV ....................Y73
4138551 ..... GTM315007 WU12PV ....................Y73
4138552 ..... GTM315008 WU12PV ....................Y73
4138553 ..... GTM315009 WU12PV ....................Y73
4138554 ..... GTM315010 WU12PV ....................Y73
4138555 ..... GTM315011 WU12PV ....................Y73
4138556 ..... GTM315012 WU12PV ....................Y73
4138557 ..... GTM315013 WU12PV ....................Y73
4138558 ..... GTM315014 WU12PV ....................Y73
4138559 ..... GTM315015 WU12PV ....................Y73
4138560 ..... GTM315016 WU12PV ....................Y73
4138561 ..... GTM315021 WU12PV ....................Y72
4138562 ..... GTM315023 WU12PV ....................Y72
4138563 ..... GTM315017 WU12PV ....................Y72
4138564 ..... GTM315018 WU12PV ....................Y72
4138565 ..... GTM315019 WU12PV ....................Y72
4138566 ..... GTM315020 WU12PV ....................Y72
4138567 ..... GTM315022 WU12PV ....................Y72
4138568 ..... GTM315028 WU12PV ....................Y72
4138569 ..... GTM315030 WU12PV ....................Y72
4138570 ..... GTM315024 WU12PV ....................Y72
4138571 ..... GTM315025 WU12PV ....................Y72
4138572 ..... GTM315026 WU12PV ....................Y72
4138573 ..... GTM315027 WU12PV ....................Y72
4138574 ..... GTM315029 WU12PV ....................Y72
4138575 ..... GTM415041 WU16PV ....................Y76
4138576 ..... GTM415001 WU16PV ....................Y75
4138577 ..... GTM415042 WU16PV ....................Y76
4138578 ..... GTM415002 WU16PV ....................Y75
4138579 ..... GTM415043 WU16PV ....................Y76
4138580 ..... GTM415003 WU16PV ....................Y75
4138581 ..... GTM415044 WU16PV ....................Y76
4138582 ..... GTM415004 WU16PV ....................Y75
4138583 ..... GTM415045 WU16PV ....................Y76
4138584 ..... GTM415005 WU16PV ....................Y75
4138585 ..... GTM415046 WU16PV ....................Y76
4138586 ..... GTM415006 WU16PV ....................Y75
4138587 ..... GTM415008 WU16PV ....................Y75
4138588 ..... GTM415009 WU16PV ....................Y75
4138589 ..... GTM415010 WU16PV ....................Y75
4138590 ..... GTM415011 WU16PV ....................Y75
4138591 ..... GTM415012 WU16PV ....................Y75
4138592 ..... GTM415014 WU16PV ....................Y75
4138593 ..... GTM415015 WU16PV ....................Y75
4138594 ..... GTM415016 WU16PV ....................Y75
4138595 ..... GTM415013 WU16PV ....................Y75
4138596 ..... GTM415017 WU16PV ....................Y75
4138597 ..... GTM415047 WU16PV ....................Y76
4138598 ..... GTM415007 WU16PV ....................Y75
4138599 ..... GTM415018 WU16PV ....................Y75
4138600 ..... GTM415019 WU16PV ....................Y75
4138601 ..... GTM415020 WU16PV ....................Y75
4138602 ..... GTM415021 WU16PV ....................Y75
4138603 ..... GTM415022 WU16PV ....................Y75
4138604 ..... GTM415023 WU16PV ....................Y75
4138605 ..... GTM415024 WU16PV ....................Y75
4138606 ..... GTM415029 WU16PV ....................Y74
4138607 ..... GTM415031 WU16PV ....................Y74
4138608 ..... GTM415032 WU16PV ....................Y74
4138609 ..... GTM415040 WU16PV ....................Y74
4138610 ..... GTM415025 WU16PV ....................Y74
4138611 ..... GTM415026 WU16PV ....................Y74
4138612 ..... GTM415027 WU16PV ....................Y74
4138613 ..... GTM415028 WU16PV ....................Y74
4138614 ..... GTM415030 WU16PV ....................Y74
4138615 ..... GTM415037 WU16PV ....................Y74
4138616 ..... GTM415039 WU16PV ....................Y74
4138617 ..... GTM415033 WU16PV ....................Y74
4138618 ..... GTM415034 WU16PV ....................Y74
4138619 ..... GTM415035 WU16PV ....................Y74
4138620 ..... GTM415036 WU16PV ....................Y74
4138621 ..... GTM415038 WU16PV ....................Y74
4140001 ..... VDS401A10000 WU25PD ..............T12
4140002 ..... VDS401A10100 WU25PD ..............T12
4140012 ..... VDS401F03000 WU25PD...............T29
4140023 ..... VDS401F03100 WU25PD...............T29
4140024 ..... VDS401F03200 WU25PD...............T29
4140025 ..... VDS401F03300 WU25PD...............T29
4140026 ..... VDS401F03400 WU25PD...............T29
4140027 ..... VDS401F03500 WU25PD...............T29
4140028 ..... VDS401F03600 WU25PD...............T29
4140029 ..... VDS401F03700 WU25PD...............T29
4140030 ..... VDS401F03800 WU25PD...............T29
4140031 ..... VDS401F03900 WU25PD...............T29
4140032 ..... VDS401F04000 WU25PD...............T29
4140033 ..... VDS401F04100 WU25PD...............T29
4140034 ..... VDS401F04200 WU25PD...............T29
4140035 ..... VDS401F04300 WU25PD...............T29
4140036 ..... VDS401F04400 WU25PD...............T29
4140037 ..... VDS401F04500 WU25PD...............T29
4140038 ..... VDS401F04600 WU25PD...............T29
4140039 ..... VDS401F04700 WU25PD...............T29
4140040 ..... VDS401F04800 WU25PD...............T29
4140041 ..... VDS401F04900 WU25PD...............T29
4140042 ..... VDS401F05000 WU25PD...............T29
4140043 ..... VDS401F05100 WU25PD...............T29
4140044 ..... VDS401F05200 WU25PD...............T29
4140045 ..... VDS401F05300 WU25PD...............T29
4140046 ..... VDS401F05400 WU25PD...............T30
4140047 ..... VDS401F05500 WU25PD...............T30
4140048 ..... VDS401F05600 WU25PD...............T30
4140049 ..... VDS401F05700 WU25PD...............T30
4140050 ..... VDS401F05800 WU25PD...............T30
4140051 ..... VDS401F05900 WU25PD...............T30
4140052 ..... VDS401F06000 WU25PD...............T30
4140053 ..... VDS401F06100 WU25PD...............T30
4140054 ..... VDS401F06200 WU25PD...............T30
4140055 ..... VDS401F06300 WU25PD...............T30
4140056 ..... VDS401F06400 WU25PD...............T30
4140057 ..... VDS401F06500 WU25PD...............T30
4140058 ..... VDS401F06600 WU25PD...............T30
4140059 ..... VDS401F06700 WU25PD...............T30
4140060 ..... VDS401F06800 WU25PD...............T30
4140061 ..... VDS401F06900 WU25PD...............T30
4140062 ..... VDS401F07000 WU25PD...............T30
4140063 ..... VDS401F07100 WU25PD...............T30
4140064 ..... VDS401F07200 WU25PD...............T30
4140065 ..... VDS401F07300 WU25PD...............T30
4140066 ..... VDS401F07400 WU25PD...............T30
4140067 ..... VDS401F07500 WU25PD...............T30
4140068 ..... VDS401F07600 WU25PD...............T30
4140069 ..... VDS401F07700 WU25PD...............T30
4140070 ..... VDS401F07800 WU25PD...............T30
4140071 ..... VDS401F07900 WU25PD...............T30
4140072 ..... VDS401F08000 WU25PD...............T30
4140073 ..... VDS401F08100 WU25PD...............T30
4140074 ..... VDS401F08200 WU25PD...............T30
4140075 ..... VDS401F08300 WU25PD...............T30
4140076 ..... VDS401F08400 WU25PD...............T30
4140077 ..... VDS401F08500 WU25PD...............T30
Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 34 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRANDO b 28 20153 09PM
Z35
widia.com
Index by Order Number
Order No. Catalogue No. Page(s)
4140078 ..... VDS401F08600 WU25PD...............T30
4140079 ..... VDS401F08700 WU25PD...............T30
4140080 ..... VDS401F08800 WU25PD...............T30
4140081 ..... VDS401F08900 WU25PD...............T30
4140082 ..... VDS401F09000 WU25PD...............T30
4140083 ..... VDS401F09100 WU25PD...............T30
4140084 ..... VDS401F09200 WU25PD...............T30
4140085 ..... VDS401F09300 WU25PD...............T30
4140086 ..... VDS401F09400 WU25PD...............T31
4140087 ..... VDS401F09500 WU25PD...............T31
4140088 ..... VDS401F09600 WU25PD...............T31
4140089 ..... VDS401F09700 WU25PD...............T31
4140090 ..... VDS401F09800 WU25PD...............T31
4140091 ..... VDS401F09900 WU25PD...............T31
4140163 ..... VDS401A10200 WU25PD ..............T12
4140164 ..... VDS401A10300 WU25PD ..............T12
4140165 ..... VDS401A10320 WU25PD ..............T12
4140166 ..... VDS401A10400 WU25PD ..............T12
4140167 ..... VDS401A10500 WU25PD ..............T12
4140168 ..... VDS401A10600 WU25PD ..............T12
4140169 ..... VDS401A10700 WU25PD ..............T12
4140170 ..... VDS401A10716 WU25PD ..............T12
4140171 ..... VDS401A10800 WU25PD ..............T12
4140172 ..... VDS401A10900 WU25PD ..............T12
4140173 ..... VDS401A11000 WU25PD ..............T12
4140174 ..... VDS401A11100 WU25PD ..............T12
4140175 ..... VDS401A11113 WU25PD ..............T12
4140176 ..... VDS401A11200 WU25PD ..............T12
4140177 ..... VDS401A11300 WU25PD ..............T12
4140178 ..... VDS401A11400 WU25PD ..............T12
4140179 ..... VDS401A11500 WU25PD ..............T12
4140180 ..... VDS401A11509 WU25PD ..............T12
4140181 ..... VDS401A11600 WU25PD ..............T12
4140182 ..... VDS401A11700 WU25PD ..............T12
4140183 ..... VDS401A11800 WU25PD ..............T12
4140184 ..... VDS401A11900 WU25PD ..............T12
4140185 ..... VDS401A11908 WU25PD ..............T12
4140186 ..... VDS401A12000 WU25PD ..............T12
4140187 ..... VDS401A12100 WU25PD ..............T12
4140188 ..... VDS401A12200 WU25PD ..............T12
4140189 ..... VDS401A12300 WU25PD ..............T12
4140190 ..... VDS401A12304 WU25PD ..............T12
4140191 ..... VDS401A12400 WU25PD ..............T12
4140192 ..... VDS401A12500 WU25PD ..............T12
4140194 ..... VDS401A12600 WU25PD ..............T12
4140195 ..... VDS401A12700 WU25PD ..............T12
4140196 ..... VDS401A12800 WU25PD ..............T12
4140197 ..... VDS401A12900 WU25PD ..............T12
4140198 ..... VDS401A13000 WU25PD ..............T12
4140199 ..... VDS401A13096 WU25PD ..............T12
4140200 ..... VDS401A13100 WU25PD ..............T12
4140201 ..... VDS401A13200 WU25PD ..............T12
4140202 ..... VDS401A13300 WU25PD ..............T13
4140203 ..... VDS401A13400 WU25PD ..............T13
4140204 ..... VDS401A13500 WU25PD ..............T13
4140205 ..... VDS401A13600 WU25PD ..............T13
4140206 ..... VDS401A13700 WU25PD ..............T13
4140207 ..... VDS401A13800 WU25PD ..............T13
4140208 ..... VDS401A13891 WU25PD ..............T13
4140209 ..... VDS401A13900 WU25PD ..............T13
4140210 ..... VDS401A14000 WU25PD ..............T13
4140211 ..... VDS401A14100 WU25PD ..............T13
4140212 ..... VDS401A14200 WU25PD ..............T13
4140213 ..... VDS401A14288 WU25PD ..............T13
4140214 ..... VDS401A14300 WU25PD ..............T13
4140215 ..... VDS401A14400 WU25PD ..............T13
4140216 ..... VDS401A14500 WU25PD ..............T13
4140217 ..... VDS401A14600 WU25PD ..............T13
4140218 ..... VDS401A14684 WU25PD ..............T13
4140219 ..... VDS401A14700 WU25PD ..............T13
4140220 ..... VDS401A14800 WU25PD ..............T13
4140221 ..... VDS401A14900 WU25PD ..............T13
4140222 ..... VDS401A15000 WU25PD ..............T13
4140223 ..... VDS401A15083 WU25PD ..............T13
4140224 ..... VDS401A15100 WU25PD ..............T13
4140225 ..... VDS401A15200 WU25PD ..............T13
4140226 ..... VDS401A15300 WU25PD ..............T13
4140227 ..... VDS401A15400 WU25PD ..............T13
4140228 ..... VDS401A15479 WU25PD ..............T13
4140229 ..... VDS401A15500 WU25PD ..............T13
4140230 ..... VDS401A15600 WU25PD ..............T13
4140231 ..... VDS401A15700 WU25PD ..............T13
4140232 ..... VDS401A15800 WU25PD ..............T13
4140233 ..... VDS401A15875 WU25PD ..............T13
4140234 ..... VDS401A15900 WU25PD ..............T13
4140235 ..... VDS401A16000 WU25PD ..............T13
4140236 ..... VDS401A16100 WU25PD ..............T13
4140237 ..... VDS401A16200 WU25PD ..............T13
4140238 ..... VDS401A16271 WU25PD ..............T13
4140239 ..... VDS401A16300 WU25PD ..............T13
4140241 ..... VDS401A16400 WU25PD ..............T13
4140242 ..... VDS401A16500 WU25PD ..............T13
4140243 ..... VDS401A16600 WU25PD ..............T14
4140244 ..... VDS401A16670 WU25PD ..............T14
4140245 ..... VDS401A16700 WU25PD ..............T14
4140246 ..... VDS401A16800 WU25PD ..............T14
4140247 ..... VDS401A16900 WU25PD ..............T14
4140248 ..... VDS401A17000 WU25PD ..............T14
4140249 ..... VDS401A17100 WU25PD ..............T14
4140250 ..... VDS401A17200 WU25PD ..............T14
4140251 ..... VDS401A17300 WU25PD ..............T14
4140252 ..... VDS401A17400 WU25PD ..............T14
4140253 ..... VDS401A17463 WU25PD ..............T14
4140254 ..... VDS401A17500 WU25PD ..............T14
4140255 ..... VDS401A17600 WU25PD ..............T14
4140256 ..... VDS401A17700 WU25PD ..............T14
4140257 ..... VDS401A17800 WU25PD ..............T14
4140258 ..... VDS401A17859 WU25PD ..............T14
4140259 ..... VDS401A17900 WU25PD ..............T14
4140270 ..... VDS401A01500 WU25PD ................T8
4140271 ..... VDS401A01600 WU25PD ................T8
4140272 ..... VDS401A01700 WU25PD ................T8
4140299 ..... VDS401A03000 WU25PD ................T9
4140300 ..... VDS401A03048 WU25PD ................T9
4140301 ..... VDS401A03100 WU25PD ................T9
4140302 ..... VDS401A03175 WU25PD ................T9
4140303 ..... VDS401A03200 WU25PD ................T9
4140304 ..... VDS401A03264 WU25PD ................T9
4140305 ..... VDS401A03300 WU25PD ................T9
4140306 ..... VDS401A03400 WU25PD ................T9
4140307 ..... VDS401A03455 WU25PD ................T9
4140308 ..... VDS401A03500 WU25PD ................T9
4140309 ..... VDS401A03571 WU25PD ................T9
4140310 ..... VDS401A03600 WU25PD ................T9
4140311 ..... VDS401A03658 WU25PD ................T9
4140312 ..... VDS401A03700 WU25PD ................T9
4140313 ..... VDS401A03734 WU25PD ................T9
4140314 ..... VDS401A03800 WU25PD ................T9
4140315 ..... VDS401A03900 WU25PD ................T9
4140316 ..... VDS401A03970 WU25PD ................T9
4140317 ..... VDS401A04000 WU25PD ................T9
4140318 ..... VDS401A04039 WU25PD ................T9
4140319 ..... VDS401A04090 WU25PD ................T9
4140320 ..... VDS401A04100 WU25PD ................T9
4140321 ..... VDS401A04200 WU25PD ................T9
4140322 ..... VDS401A04217 WU25PD ................T9
4140323 ..... VDS401A04300 WU25PD ................T9
4140324 ..... VDS401A04366 WU25PD ..............T10
4140325 ..... VDS401A04400 WU25PD ..............T10
4140326 ..... VDS401A04500 WU25PD ..............T10
4140328 ..... VDS401A04600 WU25PD ..............T10
4140329 ..... VDS401A04623 WU25PD ..............T10
4140330 ..... VDS401A04700 WU25PD ..............T10
4140331 ..... VDS401A04763 WU25PD ..............T10
4140332 ..... VDS401A04800 WU25PD ..............T10
4140333 ..... VDS401A04852 WU25PD ..............T10
4140334 ..... VDS401A04900 WU25PD ..............T10
4140335 ..... VDS401A05000 WU25PD ..............T10
4140336 ..... VDS401A05100 WU25PD ..............T10
4140337 ..... VDS401A05106 WU25PD ..............T10
4140338 ..... VDS401A05159 WU25PD ..............T10
4140339 ..... VDS401A05200 WU25PD ..............T10
4140340 ..... VDS401A05300 WU25PD ..............T10
4140341 ..... VDS401A05400 WU25PD ..............T10
4140342 ..... VDS401A05410 WU25PD ..............T10
4140343 ..... VDS401A05500 WU25PD ..............T10
4140344 ..... VDS401A05558 WU25PD ..............T10
4140345 ..... VDS401A05600 WU25PD ..............T10
4140346 ..... VDS401A05616 WU25PD ..............T10
4140347 ..... VDS401A05700 WU25PD ..............T10
4140348 ..... VDS401A05800 WU25PD ..............T10
4140349 ..... VDS401A05900 WU25PD ..............T10
4140350 ..... VDS401A05954 WU25PD ..............T10
4140351 ..... VDS401A06000 WU25PD ..............T10
4140352 ..... VDS401A06100 WU25PD ..............T10
4140353 ..... VDS401A06200 WU25PD ..............T10
4140354 ..... VDS401A06300 WU25PD ..............T10
4140355 ..... VDS401A06350 WU25PD ..............T10
4140356 ..... VDS401A06400 WU25PD ..............T10
4140357 ..... VDS401A06500 WU25PD ..............T10
4140358 ..... VDS401A06528 WU25PD ..............T10
4140359 ..... VDS401A06600 WU25PD ..............T10
4140360 ..... VDS401A06630 WU25PD ..............T10
4140361 ..... VDS401A06700 WU25PD ..............T10
4140362 ..... VDS401A06746 WU25PD ..............T10
4140363 ..... VDS401A06800 WU25PD ..............T10
4140364 ..... VDS401A06900 WU25PD ..............T10
4140365 ..... VDS401A07000 WU25PD ..............T11
4140366 ..... VDS401A07100 WU25PD ..............T11
4140367 ..... VDS401A07145 WU25PD ..............T11
4140368 ..... VDS401A07200 WU25PD ..............T11
4140369 ..... VDS401A07300 WU25PD ..............T11
4140370 ..... VDS401A07400 WU25PD ..............T11
4140371 ..... VDS401A07500 WU25PD ..............T11
4140372 ..... VDS401A07541 WU25PD ..............T11
4140373 ..... VDS401A07600 WU25PD ..............T11
4140374 ..... VDS401A07700 WU25PD ..............T11
4140375 ..... VDS401A07800 WU25PD ..............T11
4140376 ..... VDS401A07900 WU25PD ..............T11
4140377 ..... VDS401A07938 WU25PD ..............T11
4140378 ..... VDS401A08000 WU25PD ..............T11
4140379 ..... VDS401A08100 WU25PD ..............T11
4140380 ..... VDS401A08200 WU25PD ..............T11
4140381 ..... VDS401A08300 WU25PD ..............T11
4140382 ..... VDS401A08334 WU25PD ..............T11
4140383 ..... VDS401A08400 WU25PD ..............T11
4140384 ..... VDS401A08433 WU25PD ..............T11
4140385 ..... VDS401A08500 WU25PD ..............T11
4140386 ..... VDS401A08600 WU25PD ..............T11
4140387 ..... VDS401A08700 WU25PD ..............T11
4140388 ..... VDS401A08733 WU25PD ..............T11
4140389 ..... VDS401A08800 WU25PD ..............T11
4140390 ..... VDS401A08900 WU25PD ..............T11
4140391 ..... VDS401A09000 WU25PD ..............T11
4140392 ..... VDS401A09100 WU25PD ..............T11
4140393 ..... VDS401A09129 WU25PD ..............T11
4140394 ..... VDS401A09200 WU25PD ..............T11
4140395 ..... VDS401A09300 WU25PD ..............T11
4140396 ..... VDS401A09347 WU25PD ..............T11
4140397 ..... VDS401A09400 WU25PD ..............T11
4140398 ..... VDS401A09500 WU25PD ..............T11
4140399 ..... VDS401A09525 WU25PD ..............T11
4140400 ..... VDS401A09600 WU25PD ..............T11
4140401 ..... VDS401A09700 WU25PD ..............T11
4140402 ..... VDS401A09800 WU25PD ..............T11
4140403 ..... VDS401A09900 WU25PD ..............T11
4140404 ..... VDS401A09921 WU25PD ..............T11
4140410 ..... VDS401F10000 WU25PD...............T31
4140411 ..... VDS401F10100 WU25PD...............T31
4140412 ..... VDS401F10200 WU25PD...............T31
4140423 ..... VDS401A01800 WU25PD ................T8
4140424 ..... VDS401A01900 WU25PD ................T8
4140425 ..... VDS401A01984 WU25PD ................T8
4140426 ..... VDS401A02000 WU25PD ................T8
4140427 ..... VDS401A02100 WU25PD ................T8
4140428 ..... VDS401A02200 WU25PD ................T8
4140429 ..... VDS401A02300 WU25PD ................T8
4140430 ..... VDS401A02383 WU25PD ................T8
4140431 ..... VDS401A02400 WU25PD ................T9
4140432 ..... VDS401A02439 WU25PD ................T9
4140433 ..... VDS401A02489 WU25PD ................T9
4140434 ..... VDS401A02500 WU25PD ................T9
4140435 ..... VDS401A02578 WU25PD ................T9
4140436 ..... VDS401A02600 WU25PD ................T9
4140437 ..... VDS401A02642 WU25PD ................T9
4140438 ..... VDS401A02700 WU25PD ................T9
4140439 ..... VDS401A02705 WU25PD ................T9
4140440 ..... VDS401A02779 WU25PD ................T9
4140441 ..... VDS401A02800 WU25PD ................T9
4140442 ..... VDS401A02820 WU25PD ................T9
4140443 ..... VDS401A02870 WU25PD ................T9
4140444 ..... VDS401A02900 WU25PD ................T9
4140445 ..... VDS401A02947 WU25PD ................T9
4140449 ..... VDS401A18000 WU25PD ..............T14
4140450 ..... VDS401A18100 WU25PD ..............T14
4140451 ..... VDS401A18200 WU25PD ..............T14
4140452 ..... VDS401A18258 WU25PD ..............T14
4140463 ..... VDS401A18300 WU25PD ..............T14
4140464 ..... VDS401A18400 WU25PD ..............T14
4140465 ..... VDS401A18500 WU25PD ..............T14
4140466 ..... VDS401A18600 WU25PD ..............T14
4140467 ..... VDS401A18654 WU25PD ..............T14
4140468 ..... VDS401A18700 WU25PD ..............T14
4140469 ..... VDS401A18800 WU25PD ..............T14
4140470 ..... VDS401A18900 WU25PD ..............T14
4140471 ..... VDS401A19000 WU25PD ..............T14
4140472 ..... VDS401A19050 WU25PD ..............T14
4140473 ..... VDS401A19100 WU25PD ..............T14
4140474 ..... VDS401A19200 WU25PD ..............T14
4140475 ..... VDS401A19300 WU25PD ..............T14
4140476 ..... VDS401A19400 WU25PD ..............T14
4140477 ..... VDS401A19500 WU25PD ..............T14
4140478 ..... VDS401A19600 WU25PD ..............T14
4140479 ..... VDS401A19700 WU25PD ..............T14
Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 35 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRAND O b 28 2015 3 09 PM
Z36 widia.com
Index by Order Number
Order No. Catalogue No. Page(s)
4140480 ..... VDS401A19800 WU25PD ..............T14
4140481 ..... VDS401A19900 WU25PD ..............T14
4140482 ..... VDS401A20000 WU25PD ..............T14
4140503 ..... VDS401F10300 WU25PD...............T31
4140504 ..... VDS401F10400 WU25PD...............T31
4140505 ..... VDS401F10500 WU25PD...............T31
4140506 ..... VDS401F10600 WU25PD...............T31
4140507 ..... VDS401F10700 WU25PD...............T31
4140508 ..... VDS401F10800 WU25PD...............T31
4140509 ..... VDS401F10900 WU25PD...............T31
4140510 ..... VDS401F11000 WU25PD...............T31
4140511 ..... VDS401F11100 WU25PD...............T31
4140512 ..... VDS401F11200 WU25PD...............T31
4140513 ..... VDS401F11300 WU25PD...............T31
4140514 ..... VDS401F11400 WU25PD...............T31
4140515 ..... VDS401F11500 WU25PD...............T31
4140516 ..... VDS401F11600 WU25PD...............T31
4140517 ..... VDS401F11700 WU25PD...............T31
4140518 ..... VDS401F11800 WU25PD...............T31
4140519 ..... VDS401F11900 WU25PD...............T31
4140520 ..... VDS401F12000 WU25PD...............T31
4140521 ..... VDS401F12100 WU25PD...............T31
4140522 ..... VDS401F12200 WU25PD...............T31
4140523 ..... VDS401F12300 WU25PD...............T31
4140524 ..... VDS401F12400 WU25PD...............T31
4140525 ..... VDS401F12500 WU25PD...............T31
4140526 ..... VDS401F12600 WU25PD...............T31
4140527 ..... VDS401F12700 WU25PD...............T31
4140528 ..... VDS401F12800 WU25PD...............T31
4140529 ..... VDS401F12900 WU25PD...............T31
4140530 ..... VDS401F13000 WU25PD...............T31
4140531 ..... VDS401F13100 WU25PD...............T31
4140532 ..... VDS401F13200 WU25PD...............T31
4140533 ..... VDS401F13300 WU25PD...............T31
4140534 ..... VDS401F13400 WU25PD...............T32
4140535 ..... VDS401F13500 WU25PD...............T32
4140536 ..... VDS401F13600 WU25PD...............T32
4140537 ..... VDS401F13700 WU25PD...............T32
4140538 ..... VDS401F13800 WU25PD...............T32
4140539 ..... VDS401F13900 WU25PD...............T32
4140540 ..... VDS401F14000 WU25PD...............T32
4140541 ..... VDS401F14100 WU25PD...............T32
4140542 ..... VDS401F14200 WU25PD...............T32
4140543 ..... VDS401F14300 WU25PD...............T32
4140544 ..... VDS401F14400 WU25PD...............T32
4140545 ..... VDS401F14500 WU25PD...............T32
4140546 ..... VDS401F14600 WU25PD...............T32
4140547 ..... VDS401F14700 WU25PD...............T32
4140548 ..... VDS401F14800 WU25PD...............T32
4140549 ..... VDS401F14900 WU25PD...............T32
4140550 ..... VDS401F15000 WU25PD...............T32
4140551 ..... VDS401F15100 WU25PD...............T32
4140552 ..... VDS401F15200 WU25PD...............T32
4140553 ..... VDS401F15300 WU25PD...............T32
4140554 ..... VDS401F15400 WU25PD...............T32
4140555 ..... VDS401F15500 WU25PD...............T32
4140556 ..... VDS401F15600 WU25PD...............T32
4140557 ..... VDS401F15700 WU25PD...............T32
4140558 ..... VDS401F15800 WU25PD...............T32
4140559 ..... VDS401F15900 WU25PD...............T32
4140560 ..... VDS401F16000 WU25PD...............T32
4140561 ..... VDS401F16100 WU25PD...............T32
4140562 ..... VDS401F16200 WU25PD...............T32
4140563 ..... VDS401F16300 WU25PD...............T32
4140564 ..... VDS401F16400 WU25PD...............T32
4140565 ..... VDS401F16500 WU25PD...............T32
4140566 ..... VDS401F16600 WU25PD...............T32
4140567 ..... VDS401F16700 WU25PD...............T32
4140568 ..... VDS401F16800 WU25PD...............T32
4140569 ..... VDS401F16900 WU25PD...............T32
4140570 ..... VDS401F17000 WU25PD...............T32
4140571 ..... VDS401F17100 WU25PD...............T32
4140572 ..... VDS401F17200 WU25PD...............T32
4140573 ..... VDS401F17300 WU25PD...............T32
4140574 ..... VDS401F17400 WU25PD...............T33
4140575 ..... VDS401F17500 WU25PD...............T33
4140576 ..... VDS401F17600 WU25PD...............T33
4140577 ..... VDS401F17700 WU25PD...............T33
4140578 ..... VDS401F17800 WU25PD...............T33
4140579 ..... VDS401F17900 WU25PD...............T33
4140580 ..... VDS401F18000 WU25PD...............T33
4140581 ..... VDS401F18100 WU25PD...............T33
4140582 ..... VDS401F18200 WU25PD...............T33
4140583 ..... VDS401F18300 WU25PD...............T33
4140584 ..... VDS401F18400 WU25PD...............T33
4140585 ..... VDS401F18500 WU25PD...............T33
4140586 ..... VDS401F18600 WU25PD...............T33
4140587 ..... VDS401F18700 WU25PD...............T33
4140588 ..... VDS401F18800 WU25PD...............T33
4140589 ..... VDS401F18900 WU25PD...............T33
4140590 ..... VDS401F19000 WU25PD...............T33
4140591 ..... VDS401F19100 WU25PD...............T33
4140592 ..... VDS401F19200 WU25PD...............T33
4140593 ..... VDS401F19300 WU25PD...............T33
4140594 ..... VDS401F19400 WU25PD...............T33
4140595 ..... VDS401F19500 WU25PD...............T33
4140596 ..... VDS401F19600 WU25PD...............T33
4140597 ..... VDS401F19700 WU25PD...............T33
4140598 ..... VDS401F19800 WU25PD...............T33
4140599 ..... VDS401F19900 WU25PD...............T33
4140600 ..... VDS401F20000 WU25PD...............T33
4141558 ..... SSP8 ............................................. H64
4142783 ..... VDS402F03000 WU25PD...............T34
4142784 ..... VDS402F03100 WU25PD...............T34
4142785 ..... VDS402F03200 WU25PD...............T34
4142786 ..... VDS402F03300 WU25PD...............T34
4142787 ..... VDS402F03400 WU25PD...............T34
4142788 ..... VDS402F03500 WU25PD...............T34
4142789 ..... VDS402F03600 WU25PD...............T34
4142790 ..... VDS402F03700 WU25PD...............T34
4142791 ..... VDS402F03800 WU25PD...............T34
4142792 ..... VDS402F03900 WU25PD...............T34
4142793 ..... VDS402F04000 WU25PD...............T34
4142794 ..... VDS402F04100 WU25PD...............T34
4142795 ..... VDS402F04200 WU25PD...............T34
4142796 ..... VDS402F04300 WU25PD...............T34
4142797 ..... VDS402F04400 WU25PD...............T34
4142798 ..... VDS402F04500 WU25PD...............T34
4142799 ..... VDS402F04600 WU25PD...............T34
4142800 ..... VDS402F04700 WU25PD...............T34
4142801 ..... VDS402F04800 WU25PD...............T34
4142802 ..... VDS402F04900 WU25PD...............T34
4142803 ..... VDS402A18000 WU25PD ..............T21
4142804 ..... VDS402A18100 WU25PD ..............T21
4142805 ..... VDS402A18200 WU25PD ..............T21
4142806 ..... VDS402A18258 WU25PD ..............T21
4142807 ..... VDS402A18300 WU25PD ..............T21
4142808 ..... VDS402A18400 WU25PD ..............T21
4142809 ..... VDS402A18500 WU25PD ..............T21
4142810 ..... VDS402A18600 WU25PD ..............T21
4142811 ..... VDS402A18654 WU25PD ..............T21
4142812 ..... VDS402A18700 WU25PD ..............T21
4142813 ..... VDS402F05000 WU25PD...............T34
4142814 ..... VDS402F05100 WU25PD...............T34
4142815 ..... VDS402F05200 WU25PD...............T34
4142816 ..... VDS402F05300 WU25PD...............T34
4142817 ..... VDS402F05400 WU25PD...............T35
4142818 ..... VDS402F05500 WU25PD...............T35
4142819 ..... VDS402F05600 WU25PD...............T35
4142820 ..... VDS402F05700 WU25PD...............T35
4142821 ..... VDS402F05800 WU25PD...............T35
4142822 ..... VDS402F05900 WU25PD...............T35
4142823 ..... VDS402A10000 WU25PD ..............T19
4142824 ..... VDS402A18800 WU25PD ..............T21
4142825 ..... VDS402A10100 WU25PD ..............T19
4142826 ..... VDS402A18900 WU25PD ..............T21
4142827 ..... VDS402A10200 WU25PD ..............T19
4142828 ..... VDS402A19000 WU25PD ..............T21
4142829 ..... VDS402A10300 WU25PD ..............T19
4142830 ..... VDS402A19050 WU25PD ..............T21
4142831 ..... VDS402A10320 WU25PD ..............T19
4142832 ..... VDS402A10400 WU25PD ..............T19
4142833 ..... VDS402A19100 WU25PD ..............T21
4142834 ..... VDS402A10500 WU25PD ..............T19
4142835 ..... VDS402A19200 WU25PD ..............T21
4142836 ..... VDS402A10600 WU25PD ..............T19
4142837 ..... VDS402A19300 WU25PD ..............T21
4142838 ..... VDS402A10700 WU25PD ..............T19
4142839 ..... VDS402A19400 WU25PD ..............T21
4142840 ..... VDS402A10716 WU25PD ..............T19
4142841 ..... VDS402A19500 WU25PD ..............T21
4142842 ..... VDS402A10800 WU25PD ..............T19
4142843 ..... VDS402F06000 WU25PD...............T35
4142844 ..... VDS402A03000 WU25PD ..............T16
4142845 ..... VDS402F06100 WU25PD...............T35
4142846 ..... VDS402A03048 WU25PD ..............T16
4142847 ..... VDS402A03100 WU25PD ..............T16
4142848 ..... VDS402F06200 WU25PD...............T35
4142849 ..... VDS402A03175 WU25PD ..............T16
4142850 ..... VDS402F06300 WU25PD...............T35
4142851 ..... VDS402A03200 WU25PD ..............T16
4142852 ..... VDS402F06400 WU25PD...............T35
4142853 ..... VDS402A19600 WU25PD ..............T21
4142854 ..... VDS402A19700 WU25PD ..............T21
4142855 ..... VDS402A10900 WU25PD ..............T19
4142856 ..... VDS402A19800 WU25PD ..............T21
4142857 ..... VDS402A11000 WU25PD ..............T19
4142858 ..... VDS402A11100 WU25PD ..............T19
4142859 ..... VDS402A19900 WU25PD ..............T21
4142860 ..... VDS402A20000 WU25PD ..............T21
4142861 ..... VDS402A11113 WU25PD ..............T19
4142862 ..... VDS402A11200 WU25PD ..............T19
4142863 ..... VDS402F06500 WU25PD...............T35
4142864 ..... VDS402A03264 WU25PD ..............T16
4142865 ..... VDS402A03300 WU25PD ..............T16
4142866 ..... VDS402F06600 WU25PD...............T35
4142867 ..... VDS402A03400 WU25PD ..............T16
4142868 ..... VDS402F06700 WU25PD...............T35
4142869 ..... VDS402A03455 WU25PD ..............T16
4142870 ..... VDS402F06800 WU25PD...............T35
4142871 ..... VDS402A01500 WU25PD ..............T15
4142872 ..... VDS402A03500 WU25PD ..............T16
4142873 ..... VDS402A11300 WU25PD ..............T19
4142874 ..... VDS402A11400 WU25PD ..............T19
4142875 ..... VDS402A11500 WU25PD ..............T19
4142876 ..... VDS402A11509 WU25PD ..............T19
4142877 ..... VDS402A11600 WU25PD ..............T19
4142878 ..... VDS402A11700 WU25PD ..............T19
4142879 ..... VDS402A11800 WU25PD ..............T19
4142880 ..... VDS402A11900 WU25PD ..............T19
4142881 ..... VDS402A11908 WU25PD ..............T19
4142882 ..... VDS402A12000 WU25PD ..............T19
4142883 ..... VDS402F06900 WU25PD...............T35
4142884 ..... VDS402A01600 WU25PD ..............T15
4142885 ..... VDS402A03571 WU25PD ..............T16
4142886 ..... VDS402F07000 WU25PD...............T35
4142887 ..... VDS402A01700 WU25PD ..............T15
4142888 ..... VDS402A03600 WU25PD ..............T16
4142889 ..... VDS402F07100 WU25PD...............T35
4142890 ..... VDS402A01800 WU25PD ..............T15
4142891 ..... VDS402A03658 WU25PD ..............T16
4142892 ..... VDS402F07200 WU25PD...............T35
4142893 ..... VDS402A01900 WU25PD ..............T15
4142894 ..... VDS402A03700 WU25PD ..............T16
4142895 ..... VDS402F07300 WU25PD...............T35
4142896 ..... VDS402A01984 WU25PD ..............T15
4142897 ..... VDS402A03734 WU25PD ..............T16
4142898 ..... VDS402F07400 WU25PD...............T35
4142899 ..... VDS402A02000 WU25PD ..............T15
4142900 ..... VDS402A03800 WU25PD ..............T16
4142901 ..... VDS402F07500 WU25PD...............T35
4142902 ..... VDS402A02100 WU25PD ..............T15
4142903 ..... VDS402A03900 WU25PD ..............T16
4142904 ..... VDS402F07600 WU25PD...............T35
4142905 ..... VDS402A02200 WU25PD ..............T15
4142906 ..... VDS402A03970 WU25PD ..............T16
4142907 ..... VDS402F07700 WU25PD...............T35
4142908 ..... VDS402A02300 WU25PD ..............T15
4142909 ..... VDS402A04000 WU25PD ..............T16
4142910 ..... VDS402F07800 WU25PD...............T35
4142911 ..... VDS402A02383 WU25PD ..............T15
4142912 ..... VDS402A04039 WU25PD ..............T16
4142913 ..... VDS402A12100 WU25PD ..............T19
4142914 ..... VDS402A12200 WU25PD ..............T19
4142915 ..... VDS402A12300 WU25PD ..............T19
4142916 ..... VDS402A12304 WU25PD ..............T19
4142917 ..... VDS402A12400 WU25PD ..............T19
4142918 ..... VDS402A12500 WU25PD ..............T19
4142919 ..... VDS402A12600 WU25PD ..............T19
4142920 ..... VDS402A12700 WU25PD ..............T19
4142921 ..... VDS402A12800 WU25PD ..............T19
4142922 ..... VDS402A12900 WU25PD ..............T19
4142923 ..... VDS402F07900 WU25PD...............T35
4142924 ..... VDS402A02400 WU25PD ..............T16
4142925 ..... VDS402A04090 WU25PD ..............T16
4142926 ..... VDS402F08000 WU25PD...............T35
4142927 ..... VDS402A02439 WU25PD ..............T16
4142928 ..... VDS402A04100 WU25PD ..............T16
4142929 ..... VDS402F08100 WU25PD...............T35
4142930 ..... VDS402A02489 WU25PD ..............T16
4142931 ..... VDS402A04200 WU25PD ..............T16
4142932 ..... VDS402F08200 WU25PD...............T35
4142933 ..... VDS402A02500 WU25PD ..............T16
4142934 ..... VDS402A04217 WU25PD ..............T16
4142935 ..... VDS402F08300 WU25PD...............T35
4142936 ..... VDS402A02578 WU25PD ..............T16
4142937 ..... VDS402A04300 WU25PD ..............T16
4142938 ..... VDS402F08400 WU25PD...............T35
4142939 ..... VDS402A02600 WU25PD ..............T16
4142940 ..... VDS402A04366 WU25PD ..............T17
4142941 ..... VDS402F08500 WU25PD...............T35
4142942 ..... VDS402A02642 WU25PD ..............T16
4142943 ..... VDS402A04400 WU25PD ..............T17
4142944 ..... VDS402F08600 WU25PD...............T35
Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 36 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRANDO b 28 20153 09PM
Z37
widia.com
Index by Order Number
Order No. Catalogue No. Page(s)
4142945 ..... VDS402A02700 WU25PD ..............T16
4142946 ..... VDS402A04500 WU25PD ..............T17
4142947 ..... VDS402F08700 WU25PD...............T35
4142948 ..... VDS402A02705 WU25PD ..............T16
4142949 ..... VDS402A04600 WU25PD ..............T17
4142950 ..... VDS402F08800 WU25PD...............T35
4142951 ..... VDS402A02779 WU25PD ..............T16
4142952 ..... VDS402A04623 WU25PD ..............T17
4142953 ..... VDS402A13000 WU25PD ..............T19
4142954 ..... VDS402A13096 WU25PD ..............T19
4142955 ..... VDS402A13100 WU25PD ..............T19
4142956 ..... VDS402A13200 WU25PD ..............T19
4142957 ..... VDS402A13300 WU25PD ..............T20
4142958 ..... VDS402A13400 WU25PD ..............T20
4142959 ..... VDS402A13500 WU25PD ..............T20
4142960 ..... VDS402A13600 WU25PD ..............T20
4142961 ..... VDS402A13700 WU25PD ..............T20
4142962 ..... VDS402A13800 WU25PD ..............T20
4142963 ..... VDS402F08900 WU25PD...............T35
4142964 ..... VDS402A02800 WU25PD ..............T16
4142965 ..... VDS402A04700 WU25PD ..............T17
4142966 ..... VDS402F09000 WU25PD...............T35
4142967 ..... VDS402A02820 WU25PD ..............T16
4142968 ..... VDS402A04763 WU25PD ..............T17
4142969 ..... VDS402F09100 WU25PD...............T35
4142970 ..... VDS402A02870 WU25PD ..............T16
4142971 ..... VDS402A04800 WU25PD ..............T17
4142972 ..... VDS402F09200 WU25PD...............T35
4142973 ..... VDS402A02900 WU25PD ..............T16
4142974 ..... VDS402A04852 WU25PD ..............T17
4142975 ..... VDS402F09300 WU25PD...............T35
4142976 ..... VDS402A02947 WU25PD ..............T16
4142977 ..... VDS402A04900 WU25PD ..............T17
4142978 ..... VDS402F09400 WU25PD...............T36
4142979 ..... VDS402A05000 WU25PD ..............T17
4142980 ..... VDS402F09500 WU25PD...............T36
4142981 ..... VDS402A05100 WU25PD ..............T17
4142982 ..... VDS402F09600 WU25PD...............T36
4142983 ..... VDS402A13891 WU25PD ..............T20
4142984 ..... VDS402A13900 WU25PD ..............T20
4142985 ..... VDS402A14000 WU25PD ..............T20
4142986 ..... VDS402A14100 WU25PD ..............T20
4142987 ..... VDS402A14200 WU25PD ..............T20
4142988 ..... VDS402A14288 WU25PD ..............T20
4142989 ..... VDS402A14300 WU25PD ..............T20
4142990 ..... VDS402A14400 WU25PD ..............T20
4142991 ..... VDS402A14500 WU25PD ..............T20
4142992 ..... VDS402A14600 WU25PD ..............T20
4142993 ..... VDS402F09700 WU25PD...............T36
4142994 ..... VDS402A05106 WU25PD ..............T17
4142995 ..... VDS402F09800 WU25PD...............T36
4142996 ..... VDS402A05159 WU25PD ..............T17
4142997 ..... VDS402A05200 WU25PD ..............T17
4142998 ..... VDS402F09900 WU25PD...............T36
4142999 ..... VDS402A05300 WU25PD ..............T17
4143000 ..... VDS402A05400 WU25PD ..............T17
4143001 ..... VDS402A05410 WU25PD ..............T17
4143002 ..... VDS402A05500 WU25PD ..............T17
4143003 ..... VDS402A05558 WU25PD ..............T17
4143004 ..... VDS402A05600 WU25PD ..............T17
4143005 ..... VDS402A05616 WU25PD ..............T17
4143006 ..... VDS402A05700 WU25PD ..............T17
4143007 ..... VDS402A05800 WU25PD ..............T17
4143008 ..... VDS402A05900 WU25PD ..............T17
4143009 ..... VDS402A05954 WU25PD ..............T17
4143010 ..... VDS402A06000 WU25PD ..............T17
4143011 ..... VDS402A06100 WU25PD ..............T17
4143012 ..... VDS402A06200 WU25PD ..............T17
4143013 ..... VDS402A14684 WU25PD ..............T20
4143014 ..... VDS402A14700 WU25PD ..............T20
4143015 ..... VDS402A14800 WU25PD ..............T20
4143016 ..... VDS402A14900 WU25PD ..............T20
4143017 ..... VDS402A15000 WU25PD ..............T20
4143018 ..... VDS402A15083 WU25PD ..............T20
4143019 ..... VDS402A15100 WU25PD ..............T20
4143020 ..... VDS402A15200 WU25PD ..............T20
4143021 ..... VDS402A15300 WU25PD ..............T20
4143022 ..... VDS402A15400 WU25PD ..............T20
4143023 ..... VDS402A06300 WU25PD ..............T17
4143024 ..... VDS402A06350 WU25PD ..............T17
4143025 ..... VDS402A06400 WU25PD ..............T17
4143026 ..... VDS402A06500 WU25PD ..............T17
4143027 ..... VDS402A06528 WU25PD ..............T17
4143028 ..... VDS402A06600 WU25PD ..............T17
4143029 ..... VDS402A06630 WU25PD ..............T17
4143030 ..... VDS402A06700 WU25PD ..............T17
4143031 ..... VDS402A06746 WU25PD ..............T17
4143032 ..... VDS402A06800 WU25PD ..............T17
4143033 ..... VDS402A15479 WU25PD ..............T20
4143034 ..... VDS402A15500 WU25PD ..............T20
4143035 ..... VDS402A15600 WU25PD ..............T20
4143036 ..... VDS402A15700 WU25PD ..............T20
4143037 ..... VDS402A15800 WU25PD ..............T20
4143038 ..... VDS402A15875 WU25PD ..............T20
4143039 ..... VDS402A15900 WU25PD ..............T20
4143040 ..... VDS402A16000 WU25PD ..............T20
4143041 ..... VDS402A16100 WU25PD ..............T20
4143042 ..... VDS402A16200 WU25PD ..............T20
4143043 ..... VDS402A06900 WU25PD ..............T17
4143044 ..... VDS402A07000 WU25PD ..............T18
4143045 ..... VDS402A07100 WU25PD ..............T18
4143046 ..... VDS402A07145 WU25PD ..............T18
4143047 ..... VDS402A07200 WU25PD ..............T18
4143048 ..... VDS402A07300 WU25PD ..............T18
4143049 ..... VDS402A07400 WU25PD ..............T18
4143050 ..... VDS402A07500 WU25PD ..............T18
4143051 ..... VDS402A07541 WU25PD ..............T18
4143052 ..... VDS402A07600 WU25PD ..............T18
4143053 ..... VDS402A16271 WU25PD ..............T20
4143054 ..... VDS402A16300 WU25PD ..............T20
4143055 ..... VDS402A16400 WU25PD ..............T20
4143056 ..... VDS402A16500 WU25PD ..............T20
4143057 ..... VDS402A16600 WU25PD ..............T21
4143058 ..... VDS402A16670 WU25PD ..............T21
4143059 ..... VDS402A16700 WU25PD ..............T21
4143060 ..... VDS402A16800 WU25PD ..............T21
4143061 ..... VDS402A16900 WU25PD ..............T21
4143062 ..... VDS402A17000 WU25PD ..............T21
4143063 ..... VDS402A07700 WU25PD ..............T18
4143064 ..... VDS402A07800 WU25PD ..............T18
4143065 ..... VDS402A07900 WU25PD ..............T18
4143066 ..... VDS402A07938 WU25PD ..............T18
4143067 ..... VDS402A08000 WU25PD ..............T18
4143068 ..... VDS402A08100 WU25PD ..............T18
4143069 ..... VDS402A08200 WU25PD ..............T18
4143070 ..... VDS402A08300 WU25PD ..............T18
4143071 ..... VDS402A08334 WU25PD ..............T18
4143072 ..... VDS402A08400 WU25PD ..............T18
4143073 ..... VDS402A17100 WU25PD ..............T21
4143074 ..... VDS402A17200 WU25PD ..............T21
4143075 ..... VDS402A17300 WU25PD ..............T21
4143076 ..... VDS402A17400 WU25PD ..............T21
4143077 ..... VDS402A17463 WU25PD ..............T21
4143078 ..... VDS402A17500 WU25PD ..............T21
4143079 ..... VDS402A17600 WU25PD ..............T21
4143080 ..... VDS402A17700 WU25PD ..............T21
4143081 ..... VDS402A17800 WU25PD ..............T21
4143082 ..... VDS402A17859 WU25PD ..............T21
4143083 ..... VDS402A08433 WU25PD ..............T18
4143084 ..... VDS402A08500 WU25PD ..............T18
4143085 ..... VDS402A08600 WU25PD ..............T18
4143086 ..... VDS402A08700 WU25PD ..............T18
4143087 ..... VDS402A08733 WU25PD ..............T18
4143088 ..... VDS402A08800 WU25PD ..............T18
4143089 ..... VDS402A08900 WU25PD ..............T18
4143090 ..... VDS402A09000 WU25PD ..............T18
4143091 ..... VDS402A09100 WU25PD ..............T18
4143092 ..... VDS402A09129 WU25PD ..............T18
4143093 ..... VDS402A17900 WU25PD ..............T21
4143103 ..... VDS402A09200 WU25PD ..............T18
4143104 ..... VDS402A09300 WU25PD ..............T18
4143105 ..... VDS402A09347 WU25PD ..............T18
4143106 ..... VDS402A09400 WU25PD ..............T18
4143107 ..... VDS402A09500 WU25PD ..............T18
4143108 ..... VDS402A09525 WU25PD ..............T18
4143109 ..... VDS402A09600 WU25PD ..............T18
4143110 ..... VDS402A09700 WU25PD ..............T18
4143111 ..... VDS402A09800 WU25PD ..............T18
4143112 ..... VDS402A09900 WU25PD ..............T18
4143113 ..... VDS402A09921 WU25PD ..............T18
4143421 ..... VDS403A10000 WU25PD ..............T25
4143422 ..... VDS403A10100 WU25PD ..............T25
4143473 ..... VDS403A10200 WU25PD ..............T25
4143474 ..... VDS403A10300 WU25PD ..............T25
4143475 ..... VDS403A10320 WU25PD ..............T25
4143476 ..... VDS403A10400 WU25PD ..............T25
4143477 ..... VDS403A10500 WU25PD ..............T26
4143478 ..... VDS403A10600 WU25PD ..............T26
4143479 ..... VDS403A10700 WU25PD ..............T26
4143480 ..... VDS403A10716 WU25PD ..............T26
4143481 ..... VDS403A10800 WU25PD ..............T26
4143482 ..... VDS403A10900 WU25PD ..............T26
4143483 ..... VDS403A11000 WU25PD ..............T26
4143484 ..... VDS403A11100 WU25PD ..............T26
4143485 ..... VDS403A11113 WU25PD ..............T26
4143486 ..... VDS403A11200 WU25PD ..............T26
4143487 ..... VDS403A11300 WU25PD ..............T26
4143488 ..... VDS403A11400 WU25PD ..............T26
4143489 ..... VDS403A11500 WU25PD ..............T26
4143490 ..... VDS403A11509 WU25PD ..............T26
4143491 ..... VDS403A11600 WU25PD ..............T26
4143492 ..... VDS403A11700 WU25PD ..............T26
4143493 ..... VDS403A11800 WU25PD ..............T26
4143494 ..... VDS403A11900 WU25PD ..............T26
4143495 ..... VDS403A11908 WU25PD ..............T26
4143496 ..... VDS403A12000 WU25PD ..............T26
4143497 ..... VDS403A12100 WU25PD ..............T26
4143498 ..... VDS403A12200 WU25PD ..............T26
4143499 ..... VDS403A12300 WU25PD ..............T26
4143500 ..... VDS403A12304 WU25PD ..............T26
4143501 ..... VDS403A12400 WU25PD ..............T26
4143502 ..... VDS403A12500 WU25PD ..............T26
4143503 ..... VDS403A12600 WU25PD ..............T26
4143504 ..... VDS403A12700 WU25PD ..............T26
4143505 ..... VDS403A12800 WU25PD ..............T26
4143506 ..... VDS403A12900 WU25PD ..............T26
4143507 ..... VDS403A13000 WU25PD ..............T26
4143508 ..... VDS403A13096 WU25PD ..............T26
4143509 ..... VDS403A13100 WU25PD ..............T26
4143510 ..... VDS403A13200 WU25PD ..............T26
4143511 ..... VDS403A13300 WU25PD ..............T26
4143512 ..... VDS403A13400 WU25PD ..............T26
4143513 ..... VDS403A13500 WU25PD ..............T26
4143514 ..... VDS403A13600 WU25PD ..............T26
4143515 ..... VDS403A13700 WU25PD ..............T26
4143516 ..... VDS403A13800 WU25PD ..............T26
4143517 ..... VDS403A13891 WU25PD ..............T27
4143518 ..... VDS403A13900 WU25PD ..............T27
4143519 ..... VDS403A14000 WU25PD ..............T27
4143520 ..... VDS403A14100 WU25PD ..............T27
4143521 ..... VDS403A14200 WU25PD ..............T27
4143522 ..... VDS403A14288 WU25PD ..............T27
4143523 ..... VDS403A14300 WU25PD ..............T27
4143524 ..... VDS403A14400 WU25PD ..............T27
4143525 ..... VDS403A14500 WU25PD ..............T27
4143526 ..... VDS403A14600 WU25PD ..............T27
4143527 ..... VDS403A14684 WU25PD ..............T27
4143528 ..... VDS403A14700 WU25PD ..............T27
4143529 ..... VDS403A14800 WU25PD ..............T27
4143530 ..... VDS403A14900 WU25PD ..............T27
4143531 ..... VDS403A15000 WU25PD ..............T27
4143532 ..... VDS403A15083 WU25PD ..............T27
4143533 ..... VDS403A15100 WU25PD ..............T27
4143534 ..... VDS403A15200 WU25PD ..............T27
4143535 ..... VDS403A15300 WU25PD ..............T27
4143536 ..... VDS403A15400 WU25PD ..............T27
4143537 ..... VDS403A15479 WU25PD ..............T27
4143538 ..... VDS403A15500 WU25PD ..............T27
4143539 ..... VDS403A15600 WU25PD ..............T27
4143540 ..... VDS403A15700 WU25PD ..............T27
4143541 ..... VDS403A15800 WU25PD ..............T27
4143542 ..... VDS403A15875 WU25PD ..............T27
4143543 ..... VDS403A15900 WU25PD ..............T27
4143544 ..... VDS403A16000 WU25PD ..............T27
4143545 ..... VDS403A16100 WU25PD ..............T27
4143546 ..... VDS403A16200 WU25PD ..............T27
4143547 ..... VDS403A16271 WU25PD ..............T27
4143548 ..... VDS403A16300 WU25PD ..............T27
4143549 ..... VDS403A16400 WU25PD ..............T27
4143550 ..... VDS403A16500 WU25PD ..............T27
4143551 ..... VDS403A16600 WU25PD ..............T27
4143552 ..... VDS403A16670 WU25PD ..............T27
4143553 ..... VDS403A16700 WU25PD ..............T27
4143554 ..... VDS403A16800 WU25PD ..............T27
4143555 ..... VDS403A16900 WU25PD ..............T27
4143556 ..... VDS403A17000 WU25PD ..............T27
4143557 ..... VDS403A17100 WU25PD ..............T28
4143558 ..... VDS403A17200 WU25PD ..............T28
4143559 ..... VDS403A17300 WU25PD ..............T28
4143560 ..... VDS403A17400 WU25PD ..............T28
4143561 ..... VDS403A17463 WU25PD ..............T28
4143562 ..... VDS403A17500 WU25PD ..............T28
4143563 ..... VDS403A17600 WU25PD ..............T28
4143564 ..... VDS403A17700 WU25PD ..............T28
4143565 ..... VDS403A17800 WU25PD ..............T28
4143566 ..... VDS403A17859 WU25PD ..............T28
4143567 ..... VDS403A17900 WU25PD ..............T28
4143569 ..... VDS402F10000 WU25PD...............T36
4143570 ..... VDS402F10100 WU25PD...............T36
4143571 ..... VDS402F10200 WU25PD...............T36
4143572 ..... VDS402F10300 WU25PD...............T36
4143583 ..... VDS402F10400 WU25PD...............T36
4143584 ..... VDS402F10500 WU25PD...............T36
4143585 ..... VDS402F10600 WU25PD...............T36
Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 37 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRAND O b 28 2015 3 09 PM
Z38 widia.com
Index by Order Number
Order No. Catalogue No. Page(s)
4143586 ..... VDS402F10700 WU25PD...............T36
4143587 ..... VDS402F10800 WU25PD...............T36
4143588 ..... VDS402F10900 WU25PD...............T36
4143589 ..... VDS402F11000 WU25PD...............T36
4143590 ..... VDS402F11100 WU25PD...............T36
4143591 ..... VDS402F11200 WU25PD...............T36
4143592 ..... VDS402F11300 WU25PD...............T36
4143593 ..... VDS402F11400 WU25PD...............T36
4143594 ..... VDS402F11500 WU25PD...............T36
4143595 ..... VDS402F11600 WU25PD...............T36
4143596 ..... VDS402F11700 WU25PD...............T36
4143597 ..... VDS402F11800 WU25PD...............T36
4143598 ..... VDS402F11900 WU25PD...............T36
4143599 ..... VDS402F12000 WU25PD...............T36
4143600 ..... VDS402F12100 WU25PD...............T36
4143601 ..... VDS402F12200 WU25PD...............T36
4143602 ..... VDS402F12300 WU25PD...............T36
4143603 ..... VDS402F12400 WU25PD...............T36
4143604 ..... VDS402F12500 WU25PD...............T36
4143605 ..... VDS402F12600 WU25PD...............T36
4143606 ..... VDS402F12700 WU25PD...............T36
4143607 ..... VDS402F12800 WU25PD...............T36
4143608 ..... VDS402F12900 WU25PD...............T36
4143609 ..... VDS402F13000 WU25PD...............T36
4143610 ..... VDS402F13100 WU25PD...............T36
4143611 ..... VDS402F13200 WU25PD...............T36
4143612 ..... VDS402F13300 WU25PD...............T36
4143613 ..... VDS402F13400 WU25PD...............T37
4143614 ..... VDS402F13500 WU25PD...............T37
4143615 ..... VDS402F13600 WU25PD...............T37
4143616 ..... VDS402F13700 WU25PD...............T37
4143617 ..... VDS402F13800 WU25PD...............T37
4143618 ..... VDS402F13900 WU25PD...............T37
4143619 ..... VDS402F14000 WU25PD...............T37
4143620 ..... VDS402F14100 WU25PD...............T37
4143621 ..... VDS402F14200 WU25PD...............T37
4143622 ..... VDS402F14300 WU25PD...............T37
4143623 ..... VDS402F14400 WU25PD...............T37
4143624 ..... VDS402F14500 WU25PD...............T37
4143625 ..... VDS402F14600 WU25PD...............T37
4143626 ..... VDS402F14700 WU25PD...............T37
4143627 ..... VDS402F14800 WU25PD...............T37
4143628 ..... VDS402F14900 WU25PD...............T37
4143629 ..... VDS402F15000 WU25PD...............T37
4143630 ..... VDS402F15100 WU25PD...............T37
4143631 ..... VDS402F15200 WU25PD...............T37
4143632 ..... VDS402F15300 WU25PD...............T37
4143633 ..... VDS402F15400 WU25PD...............T37
4143634 ..... VDS402F15500 WU25PD...............T37
4143635 ..... VDS402F15600 WU25PD...............T37
4143636 ..... VDS402F15700 WU25PD...............T37
4143637 ..... VDS402F15800 WU25PD...............T37
4143638 ..... VDS402F15900 WU25PD...............T37
4143639 ..... VDS402F16000 WU25PD...............T37
4143640 ..... VDS402F16100 WU25PD...............T37
4143641 ..... VDS402F16200 WU25PD...............T37
4143642 ..... VDS402F16300 WU25PD...............T37
4143643 ..... VDS402F16400 WU25PD...............T37
4143644 ..... VDS402F16500 WU25PD...............T37
4143645 ..... VDS402F16600 WU25PD...............T37
4143646 ..... VDS402F16700 WU25PD...............T37
4143647 ..... VDS402F16800 WU25PD...............T37
4143648 ..... VDS402F16900 WU25PD...............T37
4143649 ..... VDS402F17000 WU25PD...............T37
4143650 ..... VDS402F17100 WU25PD...............T37
4143651 ..... VDS402F17200 WU25PD...............T37
4143652 ..... VDS402F17300 WU25PD...............T37
4143653 ..... VDS402F17400 WU25PD...............T38
4143654 ..... VDS402F17500 WU25PD...............T38
4143655 ..... VDS402F17600 WU25PD...............T38
4143656 ..... VDS402F17700 WU25PD...............T38
4143657 ..... VDS402F17800 WU25PD...............T38
4143658 ..... VDS402F17900 WU25PD...............T38
4143659 ..... VDS402F18000 WU25PD...............T38
4143660 ..... VDS402F18100 WU25PD...............T38
4143661 ..... VDS402F18200 WU25PD...............T38
4143662 ..... VDS402F18300 WU25PD...............T38
4143663 ..... VDS402F18400 WU25PD...............T38
4143664 ..... VDS402F18500 WU25PD...............T38
4143665 ..... VDS402F18600 WU25PD...............T38
4143666 ..... VDS402F18700 WU25PD...............T38
4143667 ..... VDS402F18800 WU25PD...............T38
4143668 ..... VDS402F18900 WU25PD...............T38
4143669 ..... VDS402F19000 WU25PD...............T38
4143670 ..... VDS402F19100 WU25PD...............T38
4143671 ..... VDS402F19200 WU25PD...............T38
4143672 ..... VDS402F19300 WU25PD...............T38
4143673 ..... VDS402F19400 WU25PD...............T38
4143674 ..... VDS402F19500 WU25PD...............T38
4143675 ..... VDS402F19600 WU25PD...............T38
4143676 ..... VDS402F19700 WU25PD...............T38
4143677 ..... VDS402F19800 WU25PD...............T38
4143678 ..... VDS402F19900 WU25PD...............T38
4143679 ..... VDS402F20000 WU25PD...............T38
4143700 ..... VDS403A01500 WU25PD ..............T22
4143701 ..... VDS403A01600 WU25PD ..............T22
4143702 ..... VDS403A01700 WU25PD ..............T22
4143723 ..... VDS403A01800 WU25PD ..............T22
4143724 ..... VDS403A01900 WU25PD ..............T22
4143725 ..... VDS403A01984 WU25PD ..............T22
4143726 ..... VDS403A02000 WU25PD ..............T22
4143727 ..... VDS403A02100 WU25PD ..............T22
4143728 ..... VDS403A02200 WU25PD ..............T22
4143729 ..... VDS403A02300 WU25PD ..............T22
4143730 ..... VDS403A02383 WU25PD ..............T22
4143731 ..... VDS403A02400 WU25PD ..............T22
4143732 ..... VDS403A02439 WU25PD ..............T22
4143733 ..... VDS403A02489 WU25PD ..............T22
4143734 ..... VDS403A02500 WU25PD ..............T22
4143735 ..... VDS403A02578 WU25PD ..............T22
4143736 ..... VDS403A02600 WU25PD ..............T22
4143737 ..... VDS403A02642 WU25PD ..............T23
4143738 ..... VDS403A02700 WU25PD ..............T23
4143739 ..... VDS403A02705 WU25PD ..............T23
4143740 ..... VDS403A02779 WU25PD ..............T23
4143741 ..... VDS403A02800 WU25PD ..............T23
4143742 ..... VDS403A02820 WU25PD ..............T23
4143743 ..... VDS403A02870 WU25PD ..............T23
4143744 ..... VDS403A02900 WU25PD ..............T23
4143745 ..... VDS403A02947 WU25PD ..............T23
4143746 ..... VDS403A03000 WU25PD ..............T23
4143747 ..... VDS403A03048 WU25PD ..............T23
4143748 ..... VDS403A03100 WU25PD ..............T23
4143749 ..... VDS403A03175 WU25PD ..............T23
4143750 ..... VDS403A03200 WU25PD ..............T23
4143751 ..... VDS403A03264 WU25PD ..............T23
4143752 ..... VDS403A03300 WU25PD ..............T23
4143753 ..... VDS403A03400 WU25PD ..............T23
4143754 ..... VDS403A03455 WU25PD ..............T23
4143755 ..... VDS403A03500 WU25PD ..............T23
4143756 ..... VDS403A03571 WU25PD ..............T23
4143757 ..... VDS403A03600 WU25PD ..............T23
4143758 ..... VDS403A03658 WU25PD ..............T23
4143759 ..... VDS403A03700 WU25PD ..............T23
4143760 ..... VDS403A03734 WU25PD ..............T23
4143761 ..... VDS403A03800 WU25PD ..............T23
4143762 ..... VDS403A03900 WU25PD ..............T23
4143763 ..... VDS403A03970 WU25PD ..............T23
4143764 ..... VDS403A04000 WU25PD ..............T23
4143765 ..... VDS403A04039 WU25PD ..............T23
4143766 ..... VDS403A04090 WU25PD ..............T23
4143767 ..... VDS403A04100 WU25PD ..............T23
4143768 ..... VDS403A04200 WU25PD ..............T23
4143769 ..... VDS403A04217 WU25PD ..............T23
4143770 ..... VDS403A04300 WU25PD ..............T23
4143771 ..... VDS403A04366 WU25PD ..............T23
4143772 ..... VDS403A04400 WU25PD ..............T23
4143773 ..... VDS403A04500 WU25PD ..............T23
4143774 ..... VDS403A04600 WU25PD ..............T23
4143775 ..... VDS403A04623 WU25PD ..............T23
4143776 ..... VDS403A04700 WU25PD ..............T23
4143777 ..... VDS403A04763 WU25PD ..............T24
4143778 ..... VDS403A04800 WU25PD ..............T24
4143779 ..... VDS403A04852 WU25PD ..............T24
4143780 ..... VDS403A04900 WU25PD ..............T24
4143781 ..... VDS403A05000 WU25PD ..............T24
4143782 ..... VDS403A05100 WU25PD ..............T24
4143783 ..... VDS403A05106 WU25PD ..............T24
4143784 ..... VDS403A05159 WU25PD ..............T24
4143785 ..... VDS403A05200 WU25PD ..............T24
4143786 ..... VDS403A05300 WU25PD ..............T24
4143787 ..... VDS403A05400 WU25PD ..............T24
4143788 ..... VDS403A05410 WU25PD ..............T24
4143789 ..... VDS403A05500 WU25PD ..............T24
4143790 ..... VDS403A05558 WU25PD ..............T24
4143791 ..... VDS403A05600 WU25PD ..............T24
4143792 ..... VDS403A05616 WU25PD ..............T24
4143793 ..... VDS403A05700 WU25PD ..............T24
4143794 ..... VDS403A05800 WU25PD ..............T24
4143795 ..... VDS403A05900 WU25PD ..............T24
4143796 ..... VDS403A05954 WU25PD ..............T24
4143797 ..... VDS403A06000 WU25PD ..............T24
4143798 ..... VDS403A06100 WU25PD ..............T24
4143799 ..... VDS403A06200 WU25PD ..............T24
4143800 ..... VDS403A06300 WU25PD ..............T24
4143801 ..... VDS403A06350 WU25PD ..............T24
4143802 ..... VDS403A06400 WU25PD ..............T24
4143803 ..... VDS403A06500 WU25PD ..............T24
4143804 ..... VDS403A06528 WU25PD ..............T24
4143805 ..... VDS403A06600 WU25PD ..............T24
4143806 ..... VDS403A06630 WU25PD ..............T24
4143807 ..... VDS403A06700 WU25PD ..............T24
4143808 ..... VDS403A06746 WU25PD ..............T24
4143809 ..... VDS403A06800 WU25PD ..............T24
4143810 ..... VDS403A06900 WU25PD ..............T24
4143811 ..... VDS403A07000 WU25PD ..............T24
4143812 ..... VDS403A07100 WU25PD ..............T24
4143813 ..... VDS403A07145 WU25PD ..............T24
4143814 ..... VDS403A07200 WU25PD ..............T24
4143815 ..... VDS403A07300 WU25PD ..............T24
4143816 ..... VDS403A07400 WU25PD ..............T24
4143817 ..... VDS403A07500 WU25PD ..............T25
4143818 ..... VDS403A07541 WU25PD ..............T25
4143819 ..... VDS403A07600 WU25PD ..............T25
4143820 ..... VDS403A07700 WU25PD ..............T25
4143821 ..... VDS403A07800 WU25PD ..............T25
4143822 ..... VDS403A07900 WU25PD ..............T25
4143823 ..... VDS403A07938 WU25PD ..............T25
4143824 ..... VDS403A08000 WU25PD ..............T25
4143825 ..... VDS403A08100 WU25PD ..............T25
4143826 ..... VDS403A08200 WU25PD ..............T25
4143827 ..... VDS403A08300 WU25PD ..............T25
4143828 ..... VDS403A08334 WU25PD ..............T25
4143829 ..... VDS403A08400 WU25PD ..............T25
4143830 ..... VDS403A08433 WU25PD ..............T25
4143831 ..... VDS403A08500 WU25PD ..............T25
4143832 ..... VDS403A08600 WU25PD ..............T25
4143833 ..... VDS403A08700 WU25PD ..............T25
4143834 ..... VDS403A08733 WU25PD ..............T25
4143835 ..... VDS403A08800 WU25PD ..............T25
4143836 ..... VDS403A08900 WU25PD ..............T25
4143837 ..... VDS403A09000 WU25PD ..............T25
4143838 ..... VDS403A09100 WU25PD ..............T25
4143839 ..... VDS403A09129 WU25PD ..............T25
4143840 ..... VDS403A09200 WU25PD ..............T25
4143841 ..... VDS403A09300 WU25PD ..............T25
4143842 ..... VDS403A09347 WU25PD ..............T25
4143843 ..... VDS403A09400 WU25PD ..............T25
4143844 ..... VDS403A09500 WU25PD ..............T25
4143845 ..... VDS403A09525 WU25PD ..............T25
4143846 ..... VDS403A09600 WU25PD ..............T25
4143847 ..... VDS403A09700 WU25PD ..............T25
4143848 ..... VDS403A09800 WU25PD ..............T25
4143849 ..... VDS403A09900 WU25PD ..............T25
4143850 ..... VDS403A09921 WU25PD ..............T25
4143888 ..... VDS403F10100 WU25PD...............T41
4143889 ..... VDS403F10200 WU25PD...............T41
4143890 ..... VDS403F10300 WU25PD...............T41
4143891 ..... VDS403F10400 WU25PD...............T41
4143892 ..... VDS403F10500 WU25PD...............T41
4143907 ..... VDS201A03000 WU25PD ................T9
4143908 ..... VDS201A03048 WU25PD ................T9
4143909 ..... VDS201A03100 WU25PD ................T9
4143910 ..... VDS201A03175 WU25PD ................T9
4143911 ..... VDS201A03200 WU25PD ................T9
4143912 ..... VDS201A03264 WU25PD ................T9
4143913 ..... VDS201A03300 WU25PD ................T9
4143914 ..... VDS201A03400 WU25PD ................T9
4143915 ..... VDS201A03455 WU25PD ................T9
4143916 ..... VDS201A03500 WU25PD ................T9
4143917 ..... VDS201A03571 WU25PD ................T9
4143918 ..... VDS201A03600 WU25PD ................T9
4143919 ..... VDS201A03658 WU25PD ................T9
4143920 ..... VDS201A03700 WU25PD ................T9
4143921 ..... VDS201A03734 WU25PD ................T9
4143922 ..... VDS201A03800 WU25PD ................T9
4143923 ..... VDS201A03900 WU25PD ................T9
4143924 ..... VDS201A03970 WU25PD ................T9
4143925 ..... VDS201A04000 WU25PD ................T9
4143926 ..... VDS201A04039 WU25PD ................T9
4143927 ..... VDS201A04090 WU25PD ................T9
4143928 ..... VDS201A04100 WU25PD ................T9
4143929 ..... VDS201A04200 WU25PD ................T9
4143930 ..... VDS201A04217 WU25PD ................T9
4143931 ..... VDS201A04300 WU25PD ................T9
4143932 ..... VDS201A04366 WU25PD ..............T10
4143933 ..... VDS201A04400 WU25PD ..............T10
4143934 ..... VDS201A04500 WU25PD ..............T10
4143935 ..... VDS201A04600 WU25PD ..............T10
4143936 ..... VDS201A04623 WU25PD ..............T10
4143937 ..... VDS201A04700 WU25PD ..............T10
4143938 ..... VDS201A04763 WU25PD ..............T10
4143939 ..... VDS201A04800 WU25PD ..............T10
4143940 ..... VDS201A04852 WU25PD ..............T10
Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 38 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRANDO b 28 20153 09PM
Z39
widia.com
Index by Order Number
Order No. Catalogue No. Page(s)
4143941 ..... VDS201A04900 WU25PD ..............T10
4143942 ..... VDS201A05000 WU25PD ..............T10
4143943 ..... VDS201A05100 WU25PD ..............T10
4143944 ..... VDS201A05106 WU25PD ..............T10
4143945 ..... VDS201A05159 WU25PD ..............T10
4143946 ..... VDS201A05200 WU25PD ..............T10
4143947 ..... VDS201A05300 WU25PD ..............T10
4143948 ..... VDS201A05400 WU25PD ..............T10
4143949 ..... VDS201A05410 WU25PD ..............T10
4143950 ..... VDS201A05500 WU25PD ..............T10
4143951 ..... VDS201A05558 WU25PD ..............T10
4143952 ..... VDS201A05600 WU25PD ..............T10
4143953 ..... VDS201A05616 WU25PD ..............T10
4143954 ..... VDS201A05700 WU25PD ..............T10
4143955 ..... VDS201A05800 WU25PD ..............T10
4143956 ..... VDS201A05900 WU25PD ..............T10
4143957 ..... VDS201A05954 WU25PD ..............T10
4143958 ..... VDS201A06000 WU25PD ..............T10
4143959 ..... VDS201A06100 WU25PD ..............T10
4143960 ..... VDS201A06200 WU25PD ..............T10
4143961 ..... VDS201A06300 WU25PD ..............T10
4143962 ..... VDS201A06350 WU25PD ..............T10
4143963 ..... VDS201A06400 WU25PD ..............T10
4143964 ..... VDS201A06500 WU25PD ..............T10
4143965 ..... VDS201A06528 WU25PD ..............T10
4143966 ..... VDS201A06600 WU25PD ..............T10
4143967 ..... VDS201A06630 WU25PD ..............T10
4143968 ..... VDS201A06700 WU25PD ..............T10
4143969 ..... VDS201A06746 WU25PD ..............T10
4143970 ..... VDS201A06800 WU25PD ..............T10
4143971 ..... VDS201A06900 WU25PD ..............T10
4143972 ..... VDS201A07000 WU25PD ..............T11
4143973 ..... VDS201A07100 WU25PD ..............T11
4143974 ..... VDS201A07145 WU25PD ..............T11
4143975 ..... VDS201A07200 WU25PD ..............T11
4143976 ..... VDS201A07300 WU25PD ..............T11
4143977 ..... VDS201A07400 WU25PD ..............T11
4143978 ..... VDS201A07500 WU25PD ..............T11
4143979 ..... VDS201A07541 WU25PD ..............T11
4143980 ..... VDS201A07600 WU25PD ..............T11
4143981 ..... VDS201A07700 WU25PD ..............T11
4143982 ..... VDS201A07800 WU25PD ..............T11
4143983 ..... VDS201A07900 WU25PD ..............T11
4143984 ..... VDS201A07938 WU25PD ..............T11
4143985 ..... VDS201A08000 WU25PD ..............T11
4143986 ..... VDS201A08100 WU25PD ..............T11
4143987 ..... VDS201A08200 WU25PD ..............T11
4143988 ..... VDS201A08300 WU25PD ..............T11
4143989 ..... VDS201A08334 WU25PD ..............T11
4143990 ..... VDS201A08400 WU25PD ..............T11
4143991 ..... VDS201A08433 WU25PD ..............T11
4143992 ..... VDS201A08500 WU25PD ..............T11
4143993 ..... VDS201A08600 WU25PD ..............T11
4143994 ..... VDS201A08700 WU25PD ..............T11
4143995 ..... VDS201A08733 WU25PD ..............T11
4143996 ..... VDS201A08800 WU25PD ..............T11
4143997 ..... VDS201A08900 WU25PD ..............T11
4143998 ..... VDS201A09000 WU25PD ..............T11
4143999 ..... VDS201A09100 WU25PD ..............T11
4144000 ..... VDS201A09129 WU25PD ..............T11
4144001 ..... VDS201A09200 WU25PD ..............T11
4144002 ..... VDS201A09300 WU25PD ..............T11
4144003 ..... VDS201A09347 WU25PD ..............T11
4144004 ..... VDS201A09400 WU25PD ..............T11
4144005 ..... VDS201A09500 WU25PD ..............T11
4144006 ..... VDS201A09525 WU25PD ..............T11
4144007 ..... VDS201A09600 WU25PD ..............T11
4144008 ..... VDS201A09700 WU25PD ..............T11
4144009 ..... VDS201A09800 WU25PD ..............T11
4144010 ..... VDS201A09900 WU25PD ..............T11
4144011 ..... VDS201A09921 WU25PD ..............T11
4144172 ..... VDS201A10000 WU25PD ..............T12
4144195 ..... VDS201A01000 WU25PD ................T8
4144196 ..... VDS201A01016 WU25PD ................T8
4144197 ..... VDS201A01041 WU25PD ................T8
4144198 ..... VDS201A01067 WU25PD ................T8
4144199 ..... VDS201A01092 WU25PD ................T8
4144200 ..... VDS201A01100 WU25PD ................T8
4144201 ..... VDS201A01181 WU25PD ................T8
4144202 ..... VDS201A01191 WU25PD ................T8
4144207 ..... VDS403F10000 WU25PD...............T41
4144208 ..... VDS403F03000 WU25PD...............T39
4144209 ..... VDS403A18000 WU25PD ..............T28
4144210 ..... VDS403F03100 WU25PD...............T39
4144211 ..... VDS403A18100 WU25PD ..............T28
4144212 ..... VDS403A18200 WU25PD ..............T28
4144223 ..... VDS403F10600 WU25PD...............T41
4144224 ..... VDS403F10700 WU25PD...............T41
4144225 ..... VDS403F10800 WU25PD...............T41
4144226 ..... VDS403F10900 WU25PD...............T41
4144227 ..... VDS403F11000 WU25PD...............T41
4144228 ..... VDS403F11100 WU25PD...............T41
4144229 ..... VDS403F11200 WU25PD...............T41
4144230 ..... VDS403F11300 WU25PD...............T41
4144231 ..... VDS403F11400 WU25PD...............T41
4144232 ..... VDS403F11500 WU25PD...............T41
4144233 ..... VDS403F11600 WU25PD...............T41
4144234 ..... VDS403F11700 WU25PD...............T41
4144235 ..... VDS403F11800 WU25PD...............T41
4144236 ..... VDS403F11900 WU25PD...............T41
4144237 ..... VDS403F12000 WU25PD...............T41
4144238 ..... VDS403F12100 WU25PD...............T41
4144239 ..... VDS403F12200 WU25PD...............T41
4144240 ..... VDS403F12300 WU25PD...............T41
4144241 ..... VDS403F12400 WU25PD...............T41
4144242 ..... VDS403F12500 WU25PD...............T41
4144243 ..... VDS403F03200 WU25PD...............T39
4144244 ..... VDS403A18258 WU25PD ..............T28
4144245 ..... VDS403F03300 WU25PD...............T39
4144246 ..... VDS403A18300 WU25PD ..............T28
4144247 ..... VDS403F03400 WU25PD...............T39
4144248 ..... VDS403A18400 WU25PD ..............T28
4144249 ..... VDS403F03500 WU25PD...............T39
4144250 ..... VDS403A18500 WU25PD ..............T28
4144251 ..... VDS403F03600 WU25PD...............T39
4144252 ..... VDS403A18600 WU25PD ..............T28
4144253 ..... VDS403F03700 WU25PD...............T39
4144254 ..... VDS403A18654 WU25PD ..............T28
4144255 ..... VDS403F03800 WU25PD...............T39
4144256 ..... VDS403A18700 WU25PD ..............T28
4144257 ..... VDS403F03900 WU25PD...............T39
4144258 ..... VDS403A18800 WU25PD ..............T28
4144259 ..... VDS403F04000 WU25PD...............T39
4144260 ..... VDS403A18900 WU25PD ..............T28
4144261 ..... VDS403F04100 WU25PD...............T39
4144262 ..... VDS403A19000 WU25PD ..............T28
4144263 ..... VDS403F12600 WU25PD...............T41
4144264 ..... VDS403F12700 WU25PD...............T41
4144265 ..... VDS403F12800 WU25PD...............T41
4144266 ..... VDS403F12900 WU25PD...............T41
4144267 ..... VDS403F13000 WU25PD...............T41
4144268 ..... VDS403F13100 WU25PD...............T41
4144269 ..... VDS403F13200 WU25PD...............T41
4144270 ..... VDS403F13300 WU25PD...............T41
4144271 ..... VDS403F13400 WU25PD...............T42
4144272 ..... VDS403F13500 WU25PD...............T42
4144273 ..... VDS403F04200 WU25PD...............T39
4144274 ..... VDS403F04300 WU25PD...............T39
4144275 ..... VDS403A19050 WU25PD ..............T28
4144276 ..... VDS403F04400 WU25PD...............T39
4144277 ..... VDS403A19100 WU25PD ..............T28
4144278 ..... VDS403F04500 WU25PD...............T39
4144279 ..... VDS403A19200 WU25PD ..............T28
4144280 ..... VDS403F04600 WU25PD...............T39
4144281 ..... VDS403A19300 WU25PD ..............T28
4144282 ..... VDS403F04700 WU25PD...............T39
4144283 ..... VDS403A19400 WU25PD ..............T28
4144284 ..... VDS403F04800 WU25PD...............T39
4144285 ..... VDS403A19500 WU25PD ..............T28
4144286 ..... VDS403F04900 WU25PD...............T39
4144287 ..... VDS403A19600 WU25PD ..............T28
4144288 ..... VDS403F05000 WU25PD...............T39
4144289 ..... VDS403A19700 WU25PD ..............T28
4144290 ..... VDS403F05100 WU25PD...............T39
4144291 ..... VDS403A19800 WU25PD ..............T28
4144292 ..... VDS403F05200 WU25PD...............T39
4144293 ..... VDS403F13600 WU25PD...............T42
4144294 ..... VDS403F13700 WU25PD...............T42
4144295 ..... VDS403F13800 WU25PD...............T42
4144296 ..... VDS403F13900 WU25PD...............T42
4144297 ..... VDS403F14000 WU25PD...............T42
4144298 ..... VDS403F14100 WU25PD...............T42
4144299 ..... VDS403F14200 WU25PD...............T42
4144300 ..... VDS403F14300 WU25PD...............T42
4144301 ..... VDS403F14400 WU25PD...............T42
4144302 ..... VDS403F14500 WU25PD...............T42
4144303 ..... VDS403A19900 WU25PD ..............T28
4144304 ..... VDS403F05300 WU25PD...............T39
4144305 ..... VDS403A20000 WU25PD ..............T28
4144306 ..... VDS403F05400 WU25PD...............T40
4144307 ..... VDS403F05500 WU25PD...............T40
4144308 ..... VDS403F05600 WU25PD...............T40
4144309 ..... VDS403F05700 WU25PD...............T40
4144310 ..... VDS403F05800 WU25PD...............T40
4144311 ..... VDS403F05900 WU25PD...............T40
4144312 ..... VDS403F06000 WU25PD...............T40
4144313 ..... VDS403F06100 WU25PD...............T40
4144314 ..... VDS403F06200 WU25PD...............T40
4144315 ..... VDS403F06300 WU25PD...............T40
4144316 ..... VDS403F06400 WU25PD...............T40
4144317 ..... VDS403F06500 WU25PD...............T40
4144318 ..... VDS403F06600 WU25PD...............T40
4144319 ..... VDS403F06700 WU25PD...............T40
4144320 ..... VDS403F06800 WU25PD...............T40
4144321 ..... VDS403F06900 WU25PD...............T40
4144322 ..... VDS403F07000 WU25PD...............T40
4144323 ..... VDS403F14600 WU25PD...............T42
4144324 ..... VDS403F14700 WU25PD...............T42
4144325 ..... VDS403F14800 WU25PD...............T42
4144326 ..... VDS403F14900 WU25PD...............T42
4144327 ..... VDS403F15000 WU25PD...............T42
4144328 ..... VDS403F15100 WU25PD...............T42
4144329 ..... VDS403F15200 WU25PD...............T42
4144330 ..... VDS403F15300 WU25PD...............T42
4144331 ..... VDS403F15400 WU25PD...............T42
4144332 ..... VDS403F15500 WU25PD...............T42
4144333 ..... VDS403F15600 WU25PD...............T42
4144334 ..... VDS403F15700 WU25PD...............T42
4144335 ..... VDS403F15800 WU25PD...............T42
4144336 ..... VDS403F15900 WU25PD...............T42
4144337 ..... VDS403F16000 WU25PD...............T42
4144338 ..... VDS403F16100 WU25PD...............T42
4144339 ..... VDS403F16200 WU25PD...............T42
4144340 ..... VDS403F16300 WU25PD...............T42
4144341 ..... VDS403F16400 WU25PD...............T42
4144342 ..... VDS403F16500 WU25PD...............T42
4144343 ..... VDS403F07100 WU25PD...............T40
4144344 ..... VDS403F07200 WU25PD...............T40
4144345 ..... VDS403F07300 WU25PD...............T40
4144346 ..... VDS403F07400 WU25PD...............T40
4144347 ..... VDS403F07500 WU25PD...............T40
4144348 ..... VDS403F07600 WU25PD...............T40
4144349 ..... VDS403F07700 WU25PD...............T40
4144350 ..... VDS403F07800 WU25PD...............T40
4144351 ..... VDS403F07900 WU25PD...............T40
4144352 ..... VDS403F08000 WU25PD...............T40
4144353 ..... VDS403F16600 WU25PD...............T42
4144354 ..... VDS403F16700 WU25PD...............T42
4144355 ..... VDS403F16800 WU25PD...............T42
4144356 ..... VDS403F16900 WU25PD...............T42
4144357 ..... VDS403F17000 WU25PD...............T42
4144358 ..... VDS403F17100 WU25PD...............T42
4144359 ..... VDS403F17200 WU25PD...............T42
4144360 ..... VDS403F17300 WU25PD...............T42
4144361 ..... VDS403F17400 WU25PD...............T43
4144362 ..... VDS403F17500 WU25PD...............T43
4144363 ..... VDS403F08100 WU25PD...............T40
4144364 ..... VDS403F08200 WU25PD...............T40
4144365 ..... VDS403F08300 WU25PD...............T40
4144366 ..... VDS403F08400 WU25PD...............T40
4144367 ..... VDS403F08500 WU25PD...............T40
4144368 ..... VDS403F08600 WU25PD...............T40
4144369 ..... VDS403F08700 WU25PD...............T40
4144370 ..... VDS403F08800 WU25PD...............T40
4144371 ..... VDS403F08900 WU25PD...............T40
4144372 ..... VDS403F09000 WU25PD...............T40
4144373 ..... VDS403F09100 WU25PD...............T40
4144374 ..... VDS403F09200 WU25PD...............T40
4144375 ..... VDS403F09300 WU25PD...............T40
4144376 ..... VDS403F09400 WU25PD...............T41
4144377 ..... VDS403F09500 WU25PD...............T41
4144378 ..... VDS403F09600 WU25PD...............T41
4144379 ..... VDS403F09700 WU25PD...............T41
4144380 ..... VDS403F09800 WU25PD...............T41
4144381 ..... VDS403F09900 WU25PD...............T41
4144383 ..... VDS403F17600 WU25PD...............T43
4144384 ..... VDS403F17700 WU25PD...............T43
4144385 ..... VDS403F17800 WU25PD...............T43
4144386 ..... VDS403F17900 WU25PD...............T43
4144387 ..... VDS403F18000 WU25PD...............T43
4144388 ..... VDS403F18100 WU25PD...............T43
4144389 ..... VDS403F18200 WU25PD...............T43
4144390 ..... VDS403F18300 WU25PD...............T43
4144391 ..... VDS403F18400 WU25PD...............T43
4144392 ..... VDS403F18500 WU25PD...............T43
4144393 ..... VDS403F18600 WU25PD...............T43
4144394 ..... VDS403F18700 WU25PD...............T43
4144395 ..... VDS403F18800 WU25PD...............T43
4144396 ..... VDS403F18900 WU25PD...............T43
4144397 ..... VDS403F19000 WU25PD...............T43
4144398 ..... VDS403F19100 WU25PD...............T43
4144399 ..... VDS403F19200 WU25PD...............T43
4144400 ..... VDS403F19300 WU25PD...............T43
4144401 ..... VDS403F19400 WU25PD...............T43
Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 39 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRAND O b 28 2015 3 09 PM
Z40 widia.com
Index by Order Number
Order No. Catalogue No. Page(s)
4144402 ..... VDS403F19500 WU25PD...............T43
4144403 ..... VDS403F19600 WU25PD...............T43
4144404 ..... VDS403F19700 WU25PD...............T43
4144405 ..... VDS403F19800 WU25PD...............T43
4144406 ..... VDS403F19900 WU25PD...............T43
4144407 ..... VDS403F20000 WU25PD...............T43
4144423 ..... VDS201A10100 WU25PD ..............T12
4144424 ..... VDS201A10200 WU25PD ..............T12
4144425 ..... VDS201A10300 WU25PD ..............T12
4144426 ..... VDS201A10320 WU25PD ..............T12
4144427 ..... VDS201A10400 WU25PD ..............T12
4144428 ..... VDS201A10500 WU25PD ..............T12
4144429 ..... VDS201A10600 WU25PD ..............T12
4144430 ..... VDS201A10700 WU25PD ..............T12
4144431 ..... VDS201A10716 WU25PD ..............T12
4144432 ..... VDS201A10800 WU25PD ..............T12
4144433 ..... VDS201A10900 WU25PD ..............T12
4144434 ..... VDS201A11000 WU25PD ..............T12
4144435 ..... VDS201A11100 WU25PD ..............T12
4144436 ..... VDS201A11113 WU25PD ..............T12
4144437 ..... VDS201A11200 WU25PD ..............T12
4144438 ..... VDS201A11300 WU25PD ..............T12
4144439 ..... VDS201A11400 WU25PD ..............T12
4144440 ..... VDS201A11500 WU25PD ..............T12
4144441 ..... VDS201A11509 WU25PD ..............T12
4144442 ..... VDS201A11600 WU25PD ..............T12
4144443 ..... VDS201A11700 WU25PD ..............T12
4144444 ..... VDS201A11800 WU25PD ..............T12
4144445 ..... VDS201A11900 WU25PD ..............T12
4144446 ..... VDS201A11908 WU25PD ..............T12
4144447 ..... VDS201A12000 WU25PD ..............T12
4144448 ..... VDS201A12100 WU25PD ..............T12
4144449 ..... VDS201A12200 WU25PD ..............T12
4144450 ..... VDS201A12300 WU25PD ..............T12
4144451 ..... VDS201A12304 WU25PD ..............T12
4144452 ..... VDS201A12400 WU25PD ..............T12
4144453 ..... VDS201A12500 WU25PD ..............T12
4144454 ..... VDS201A12600 WU25PD ..............T12
4144455 ..... VDS201A12700 WU25PD ..............T12
4144456 ..... VDS201A12800 WU25PD ..............T12
4144457 ..... VDS201A12900 WU25PD ..............T12
4144458 ..... VDS201A13000 WU25PD ..............T12
4144459 ..... VDS201A13096 WU25PD ..............T12
4144460 ..... VDS201A13100 WU25PD ..............T12
4144461 ..... VDS201A13200 WU25PD ..............T12
4144462 ..... VDS201A13300 WU25PD ..............T13
4144463 ..... VDS201A13400 WU25PD ..............T13
4144464 ..... VDS201A13500 WU25PD ..............T13
4144465 ..... VDS201A13600 WU25PD ..............T13
4144466 ..... VDS201A13700 WU25PD ..............T13
4144467 ..... VDS201A13800 WU25PD ..............T13
4144468 ..... VDS201A13891 WU25PD ..............T13
4144469 ..... VDS201A13900 WU25PD ..............T13
4144470 ..... VDS201A14000 WU25PD ..............T13
4144471 ..... VDS201A14100 WU25PD ..............T13
4144472 ..... VDS201A14200 WU25PD ..............T13
4144473 ..... VDS201A14288 WU25PD ..............T13
4144474 ..... VDS201A14300 WU25PD ..............T13
4144475 ..... VDS201A14400 WU25PD ..............T13
4144476 ..... VDS201A14500 WU25PD ..............T13
4144477 ..... VDS201A14600 WU25PD ..............T13
4144478 ..... VDS201A14684 WU25PD ..............T13
4144479 ..... VDS201A14700 WU25PD ..............T13
4144480 ..... VDS201A14800 WU25PD ..............T13
4144481 ..... VDS201A14900 WU25PD ..............T13
4144482 ..... VDS201A15000 WU25PD ..............T13
4144483 ..... VDS201A15083 WU25PD ..............T13
4144484 ..... VDS201A15100 WU25PD ..............T13
4144485 ..... VDS201A15200 WU25PD ..............T13
4144486 ..... VDS201A15300 WU25PD ..............T13
4144487 ..... VDS201A15400 WU25PD ..............T13
4144488 ..... VDS201A15479 WU25PD ..............T13
4144489 ..... VDS201A15500 WU25PD ..............T13
4144490 ..... VDS201A15600 WU25PD ..............T13
4144491 ..... VDS201A15700 WU25PD ..............T13
4144492 ..... VDS201A15800 WU25PD ..............T13
4144493 ..... VDS201A15875 WU25PD ..............T13
4144494 ..... VDS201A15900 WU25PD ..............T13
4144495 ..... VDS201A16000 WU25PD ..............T13
4144496 ..... VDS201A16100 WU25PD ..............T13
4144497 ..... VDS201A16200 WU25PD ..............T13
4144498 ..... VDS201A16271 WU25PD ..............T13
4144499 ..... VDS201A16300 WU25PD ..............T13
4144500 ..... VDS201A16400 WU25PD ..............T13
4144501 ..... VDS201A16500 WU25PD ..............T13
4144503 ..... VDS201A16600 WU25PD ..............T14
4144504 ..... VDS201A16670 WU25PD ..............T14
4144505 ..... VDS201A16700 WU25PD ..............T14
4144506 ..... VDS201A16800 WU25PD ..............T14
4144507 ..... VDS201A16900 WU25PD ..............T14
4144508 ..... VDS201A17000 WU25PD ..............T14
4144509 ..... VDS201A17100 WU25PD ..............T14
4144510 ..... VDS201A17200 WU25PD ..............T14
4144511 ..... VDS201A17300 WU25PD ..............T14
4144512 ..... VDS201A17400 WU25PD ..............T14
4144513 ..... VDS201A17463 WU25PD ..............T14
4144514 ..... VDS201A17500 WU25PD ..............T14
4144515 ..... VDS201A17600 WU25PD ..............T14
4144516 ..... VDS201A17700 WU25PD ..............T14
4144517 ..... VDS201A17800 WU25PD ..............T14
4144518 ..... VDS201A17859 WU25PD ..............T14
4144519 ..... VDS201A17900 WU25PD ..............T14
4144523 ..... VDS201A01200 WU25PD ................T8
4144524 ..... VDS201A01300 WU25PD ................T8
4144525 ..... VDS201A01321 WU25PD ................T8
4144526 ..... VDS201A01397 WU25PD ................T8
4144527 ..... VDS201A01400 WU25PD ................T8
4144528 ..... VDS201A01500 WU25PD ................T8
4144529 ..... VDS201A01600 WU25PD ................T8
4144530 ..... VDS201A01700 WU25PD ................T8
4144531 ..... VDS201A01800 WU25PD ................T8
4144532 ..... VDS201A01900 WU25PD ................T8
4144533 ..... VDS201A01984 WU25PD ................T8
4144534 ..... VDS201A02000 WU25PD ................T8
4144535 ..... VDS201A02100 WU25PD ................T8
4144536 ..... VDS201A02200 WU25PD ................T8
4144537 ..... VDS201A02300 WU25PD ................T8
4144538 ..... VDS201A02383 WU25PD ................T8
4144539 ..... VDS201A02400 WU25PD ................T9
4144540 ..... VDS201A02439 WU25PD ................T9
4144541 ..... VDS201A02489 WU25PD ................T9
4144542 ..... VDS201A02500 WU25PD ................T9
4144543 ..... VDS201A02578 WU25PD ................T9
4144544 ..... VDS201A02600 WU25PD ................T9
4144545 ..... VDS201A02642 WU25PD ................T9
4144546 ..... VDS201A02700 WU25PD ................T9
4144547 ..... VDS201A02705 WU25PD ................T9
4144548 ..... VDS201A02779 WU25PD ................T9
4144549 ..... VDS201A02800 WU25PD ................T9
4144550 ..... VDS201A02820 WU25PD ................T9
4144551 ..... VDS201A02870 WU25PD ................T9
4144552 ..... VDS201A02900 WU25PD ................T9
4144553 ..... VDS201A02947 WU25PD ................T9
4144590 ..... VDS201A18000 WU25PD ..............T14
4144591 ..... VDS201A18100 WU25PD ..............T14
4144592 ..... VDS201A18200 WU25PD ..............T14
4144593 ..... VDS201A18258 WU25PD ..............T14
4144594 ..... VDS201A18300 WU25PD ..............T14
4144595 ..... VDS201A18400 WU25PD ..............T14
4144596 ..... VDS201A18500 WU25PD ..............T14
4144597 ..... VDS201A18600 WU25PD ..............T14
4144598 ..... VDS201A18654 WU25PD ..............T14
4144599 ..... VDS201A18700 WU25PD ..............T14
4144600 ..... VDS201A18800 WU25PD ..............T14
4144601 ..... VDS201A18900 WU25PD ..............T14
4144602 ..... VDS201A19000 WU25PD ..............T14
4144603 ..... VDS201A19050 WU25PD ..............T14
4144604 ..... VDS201A19100 WU25PD ..............T14
4144605 ..... VDS201A19200 WU25PD ..............T14
4144606 ..... VDS201A19300 WU25PD ..............T14
4144607 ..... VDS201A19400 WU25PD ..............T14
4144608 ..... VDS201A19500 WU25PD ..............T14
4144609 ..... VDS201A19600 WU25PD ..............T14
4144610 ..... VDS201A19700 WU25PD ..............T14
4144611 ..... VDS201A19800 WU25PD ..............T14
4144612 ..... VDS201A19900 WU25PD ..............T14
4144613 ..... VDS201A20000 WU25PD ..............T14
4145063 ..... SDMX120416RMM TN6520 .....J45, K6
4145064 ..... SDMX120416RMM TN6525 .....J45, K6
4145065 ..... SDMX120416RMM TN6540 .....J45, K6
4145072 ..... SDMX120424RMM TN6540 .....J45, K6
4145093 ..... SDMX120424RMM TN7535 .....J45, K6
4145094 ..... SDMX120432RMM TN6540 .....J45, K6
4145095 ..... SDMX120432RMM TN7535 .....J45, K6
4145110 ..... M270HF10 TN6525 ................... M127
4145111 ..... M270HF12 TN6525 ................... M127
4145112 ..... M270HF13 TN6525 ................... M127
4145123 ..... M270HF16 TN6525 ................... M127
4145125 ..... M270HF20 TN6525 ................... M127
4147560 ..... M200D32Z03M16RN12 ...............M28
4147561 ..... M200D35Z03M16RN12 ...............M28
4147562 ..... M200D42Z04M16RN12 ...............M28
4147564 ..... M200D32Z03B32RN12 ................M29
4147566 ..... M200D32Z03A32RN12L200 ........M30
4147567 ..... M200D32Z02A32RN12L250 ........M30
4147568 ..... M200D40Z04RN12.......................M31
4147569 ..... M200D50Z04RN12.......................M31
4147570 ..... M200D50Z05RN12.......................M31
4147571 ..... M200D52Z05RN12.......................M31
4147572 ..... M200D63Z05RN12.......................M31
4147573 ..... M200D63Z07RN12.......................M31
4147574 ..... M200D66Z07RN12.......................M31
4147575 ..... M200D80Z06RN12.......................M31
4147576 ..... M200D80Z08RN12.......................M31
4147577 ..... M200D100Z07RN12 ....................M31
4147578 ..... M200D100Z09RN12 ....................M31
4147921 ..... VDS202A18000 WU25PD ..............T21
4147922 ..... VDS202A18100 WU25PD ..............T21
4147927 ..... VDS201F03000 WU25PD...............T29
4147928 ..... VDS201F03100 WU25PD...............T29
4147929 ..... VDS201F03200 WU25PD...............T29
4147930 ..... VDS201F03300 WU25PD...............T29
4147931 ..... VDS201F03400 WU25PD...............T29
4147932 ..... VDS201F03500 WU25PD...............T29
4147933 ..... VDS201F03600 WU25PD...............T29
4147934 ..... VDS201F03700 WU25PD...............T29
4147935 ..... VDS201F03800 WU25PD...............T29
4147936 ..... VDS201F03900 WU25PD...............T29
4147937 ..... VDS201F04000 WU25PD...............T29
4147938 ..... VDS201F04100 WU25PD...............T29
4147939 ..... VDS201F04200 WU25PD...............T29
4147940 ..... VDS201F04300 WU25PD...............T29
4147941 ..... VDS201F04400 WU25PD...............T29
4147942 ..... VDS201F04500 WU25PD...............T29
4147943 ..... VDS201F04600 WU25PD...............T29
4147944 ..... VDS201F04700 WU25PD...............T29
4147945 ..... VDS201F04800 WU25PD...............T29
4147946 ..... VDS201F04900 WU25PD...............T29
4147947 ..... VDS201F05000 WU25PD...............T29
4147948 ..... VDS201F05100 WU25PD...............T29
4147949 ..... VDS201F05200 WU25PD...............T29
4147950 ..... VDS201F05300 WU25PD...............T29
4147951 ..... VDS201F05400 WU25PD...............T30
4147952 ..... VDS201F05500 WU25PD...............T30
4147953 ..... VDS201F05600 WU25PD...............T30
4147954 ..... VDS201F05700 WU25PD...............T30
4147955 ..... VDS201F05800 WU25PD...............T30
4147956 ..... VDS201F05900 WU25PD...............T30
4147957 ..... VDS201F06000 WU25PD...............T30
4147958 ..... VDS201F06100 WU25PD...............T30
4147959 ..... VDS201F06200 WU25PD...............T30
4147960 ..... VDS201F06300 WU25PD...............T30
4147961 ..... VDS201F06400 WU25PD...............T30
4147962 ..... VDS201F06500 WU25PD...............T30
4147963 ..... VDS201F06600 WU25PD...............T30
4147964 ..... VDS201F06700 WU25PD...............T30
4147965 ..... VDS201F06800 WU25PD...............T30
4147966 ..... VDS201F06900 WU25PD...............T30
4147967 ..... VDS201F07000 WU25PD...............T30
4147968 ..... VDS201F07100 WU25PD...............T30
4147969 ..... VDS201F07200 WU25PD...............T30
4147970 ..... VDS201F07300 WU25PD...............T30
4147971 ..... VDS201F07400 WU25PD...............T30
4147972 ..... VDS201F07500 WU25PD...............T30
4147973 ..... VDS201F07600 WU25PD...............T30
4147974 ..... VDS201F07700 WU25PD...............T30
4147975 ..... VDS201F07800 WU25PD...............T30
4147976 ..... VDS201F07900 WU25PD...............T30
4147977 ..... VDS201F08000 WU25PD...............T30
4147978 ..... VDS201F08100 WU25PD...............T30
4147979 ..... VDS201F08200 WU25PD...............T30
4147980 ..... VDS201F08300 WU25PD...............T30
4147981 ..... VDS201F08400 WU25PD...............T30
4147982 ..... VDS201F08500 WU25PD...............T30
4147983 ..... VDS201F08600 WU25PD...............T30
4147984 ..... VDS201F08700 WU25PD...............T30
4147985 ..... VDS201F08800 WU25PD...............T30
4147986 ..... VDS201F08900 WU25PD...............T30
4147987 ..... VDS201F09000 WU25PD...............T30
4147988 ..... VDS201F09100 WU25PD...............T30
4147989 ..... VDS201F09200 WU25PD...............T30
4147990 ..... VDS201F09300 WU25PD...............T30
4147991 ..... VDS201F09400 WU25PD...............T31
4147992 ..... VDS201F09500 WU25PD...............T31
4147993 ..... VDS201F09600 WU25PD...............T31
4147994 ..... VDS201F09700 WU25PD...............T31
4147995 ..... VDS201F09800 WU25PD...............T31
4147996 ..... VDS201F09900 WU25PD...............T31
4148000 ..... VDS202A01000 WU25PD ..............T15
4148001 ..... VDS202A01016 WU25PD ..............T15
4148002 ..... VDS202A01041 WU25PD ..............T15
4148003 ..... VDS202A01067 WU25PD ..............T15
4148004 ..... VDS202A01092 WU25PD ..............T15
4148005 ..... VDS202A01100 WU25PD ..............T15
Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 40 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRANDO b 28 20153 09PM
Z41
widia.com
Index by Order Number
Order No. Catalogue No. Page(s)
4148006 ..... VDS202A01181 WU25PD ..............T15
4148007 ..... VDS202A01191 WU25PD ..............T15
4148008 ..... VDS202A01200 WU25PD ..............T15
4148009 ..... VDS202A01300 WU25PD ..............T15
4148010 ..... VDS202A01321 WU25PD ..............T15
4148011 ..... VDS202A01397 WU25PD ..............T15
4148012 ..... VDS202A01400 WU25PD ..............T15
4148013 ..... VDS202A01500 WU25PD ..............T15
4148014 ..... VDS202A01600 WU25PD ..............T15
4148015 ..... VDS202A01700 WU25PD ..............T15
4148016 ..... VDS202A01800 WU25PD ..............T15
4148017 ..... VDS202A01900 WU25PD ..............T15
4148018 ..... VDS202A01984 WU25PD ..............T15
4148019 ..... VDS202A02000 WU25PD ..............T15
4148020 ..... VDS202A02100 WU25PD ..............T15
4148021 ..... VDS202A02200 WU25PD ..............T15
4148022 ..... VDS202A02300 WU25PD ..............T15
4148023 ..... VDS202A02383 WU25PD ..............T15
4148024 ..... VDS202A02400 WU25PD ..............T16
4148025 ..... VDS202A02439 WU25PD ..............T16
4148026 ..... VDS202A02489 WU25PD ..............T16
4148027 ..... VDS202A02500 WU25PD ..............T16
4148028 ..... VDS202A02578 WU25PD ..............T16
4148029 ..... VDS202A02600 WU25PD ..............T16
4148030 ..... VDS202A02642 WU25PD ..............T16
4148031 ..... VDS202A02700 WU25PD ..............T16
4148032 ..... VDS202A02705 WU25PD ..............T16
4148033 ..... VDS202A02779 WU25PD ..............T16
4148034 ..... VDS202A02800 WU25PD ..............T16
4148035 ..... VDS202A02820 WU25PD ..............T16
4148036 ..... VDS202A02870 WU25PD ..............T16
4148037 ..... VDS202A02900 WU25PD ..............T16
4148038 ..... VDS202A02947 WU25PD ..............T16
4148039 ..... VDS201F10000 WU25PD...............T31
4148040 ..... VDS201F10100 WU25PD...............T31
4148041 ..... VDS201F10200 WU25PD...............T31
4148042 ..... VDS201F10300 WU25PD...............T31
4148043 ..... VDS201F10400 WU25PD...............T31
4148044 ..... VDS201F10500 WU25PD...............T31
4148045 ..... VDS201F10600 WU25PD...............T31
4148046 ..... VDS201F10700 WU25PD...............T31
4148047 ..... VDS201F10800 WU25PD...............T31
4148048 ..... VDS201F10900 WU25PD...............T31
4148049 ..... VDS201F11000 WU25PD...............T31
4148050 ..... VDS201F11100 WU25PD...............T31
4148051 ..... VDS201F11200 WU25PD...............T31
4148052 ..... VDS201F11300 WU25PD...............T31
4148053 ..... VDS201F11400 WU25PD...............T31
4148054 ..... VDS201F11500 WU25PD...............T31
4148055 ..... VDS201F11600 WU25PD...............T31
4148056 ..... VDS201F11700 WU25PD...............T31
4148057 ..... VDS201F11800 WU25PD...............T31
4148058 ..... VDS201F11900 WU25PD...............T31
4148059 ..... VDS201F12000 WU25PD...............T31
4148060 ..... VDS201F12100 WU25PD...............T31
4148061 ..... VDS201F12200 WU25PD...............T31
4148062 ..... VDS201F12300 WU25PD...............T31
4148063 ..... VDS201F12400 WU25PD...............T31
4148064 ..... VDS201F12500 WU25PD...............T31
4148065 ..... VDS201F12600 WU25PD...............T31
4148066 ..... VDS201F12700 WU25PD...............T31
4148067 ..... VDS201F12800 WU25PD...............T31
4148068 ..... VDS201F12900 WU25PD...............T31
4148069 ..... VDS201F13000 WU25PD...............T31
4148070 ..... VDS201F13100 WU25PD...............T31
4148071 ..... VDS201F13200 WU25PD...............T31
4148072 ..... VDS201F13300 WU25PD...............T31
4148073 ..... VDS201F13400 WU25PD...............T32
4148074 ..... VDS201F13500 WU25PD...............T32
4148075 ..... VDS201F13600 WU25PD...............T32
4148076 ..... VDS201F13700 WU25PD...............T32
4148077 ..... VDS201F13800 WU25PD...............T32
4148078 ..... VDS201F13900 WU25PD...............T32
4148079 ..... VDS201F14000 WU25PD...............T32
4148080 ..... VDS201F14100 WU25PD...............T32
4148081 ..... VDS201F14200 WU25PD...............T32
4148082 ..... VDS201F14300 WU25PD...............T32
4148083 ..... VDS201F14400 WU25PD...............T32
4148084 ..... VDS201F14500 WU25PD...............T32
4148085 ..... VDS201F14600 WU25PD...............T32
4148086 ..... VDS201F14700 WU25PD...............T32
4148087 ..... VDS201F14800 WU25PD...............T32
4148088 ..... VDS201F14900 WU25PD...............T32
4148089 ..... VDS201F15000 WU25PD...............T32
4148090 ..... VDS201F15100 WU25PD...............T32
4148091 ..... VDS201F15200 WU25PD...............T32
4148092 ..... VDS201F15300 WU25PD...............T32
4148093 ..... VDS201F15400 WU25PD...............T32
4148094 ..... VDS201F15500 WU25PD...............T32
4148095 ..... VDS201F15600 WU25PD...............T32
4148096 ..... VDS201F15700 WU25PD...............T32
4148097 ..... VDS201F15800 WU25PD...............T32
4148098 ..... VDS201F15900 WU25PD...............T32
4148099 ..... VDS201F16000 WU25PD...............T32
4148100 ..... VDS201F16100 WU25PD...............T32
4148101 ..... VDS201F16200 WU25PD...............T32
4148102 ..... VDS201F16300 WU25PD...............T32
4148103 ..... VDS201F16400 WU25PD...............T32
4148104 ..... VDS201F16500 WU25PD...............T32
4148105 ..... VDS201F16600 WU25PD...............T32
4148106 ..... VDS201F16700 WU25PD...............T32
4148107 ..... VDS201F16800 WU25PD...............T32
4148108 ..... VDS201F16900 WU25PD...............T32
4148109 ..... VDS201F17000 WU25PD...............T32
4148110 ..... VDS201F17100 WU25PD...............T32
4148111 ..... VDS201F17200 WU25PD...............T32
4148112 ..... VDS201F17300 WU25PD...............T32
4148113 ..... VDS201F17400 WU25PD...............T33
4148114 ..... VDS201F17500 WU25PD...............T33
4148115 ..... VDS201F17600 WU25PD...............T33
4148116 ..... VDS201F17700 WU25PD...............T33
4148117 ..... VDS201F17800 WU25PD...............T33
4148118 ..... VDS201F17900 WU25PD...............T33
4148119 ..... VDS201F18000 WU25PD...............T33
4148120 ..... VDS201F18100 WU25PD...............T33
4148121 ..... VDS201F18200 WU25PD...............T33
4148122 ..... VDS201F18300 WU25PD...............T33
4148123 ..... VDS201F18400 WU25PD...............T33
4148124 ..... VDS201F18500 WU25PD...............T33
4148125 ..... VDS201F18600 WU25PD...............T33
4148126 ..... VDS201F18700 WU25PD...............T33
4148127 ..... VDS201F18800 WU25PD...............T33
4148128 ..... VDS201F18900 WU25PD...............T33
4148129 ..... VDS201F19000 WU25PD...............T33
4148130 ..... VDS201F19100 WU25PD...............T33
4148131 ..... VDS201F19200 WU25PD...............T33
4148132 ..... VDS201F19300 WU25PD...............T33
4148133 ..... VDS201F19400 WU25PD...............T33
4148134 ..... VDS201F19500 WU25PD...............T33
4148135 ..... VDS201F19600 WU25PD...............T33
4148136 ..... VDS201F19700 WU25PD...............T33
4148137 ..... VDS201F19800 WU25PD...............T33
4148138 ..... VDS201F19900 WU25PD...............T33
4148139 ..... VDS201F20000 WU25PD...............T33
4148142 ..... VDS202A03000 WU25PD ..............T16
4148143 ..... VDS202A03048 WU25PD ..............T16
4148144 ..... VDS202A03100 WU25PD ..............T16
4148145 ..... VDS202A03175 WU25PD ..............T16
4148146 ..... VDS202A03200 WU25PD ..............T16
4148147 ..... VDS202A03264 WU25PD ..............T16
4148148 ..... VDS202A03300 WU25PD ..............T16
4148149 ..... VDS202A03400 WU25PD ..............T16
4148150 ..... VDS202A03455 WU25PD ..............T16
4148151 ..... VDS202A03500 WU25PD ..............T16
4148152 ..... VDS202A03571 WU25PD ..............T16
4148153 ..... VDS202A03600 WU25PD ..............T16
4148154 ..... VDS202A03658 WU25PD ..............T16
4148155 ..... VDS202A03700 WU25PD ..............T16
4148156 ..... VDS202A03734 WU25PD ..............T16
4148157 ..... VDS202A03800 WU25PD ..............T16
4148158 ..... VDS202A03900 WU25PD ..............T16
4148159 ..... VDS202A03970 WU25PD ..............T16
4148160 ..... VDS202A04000 WU25PD ..............T16
4148161 ..... VDS202A04039 WU25PD ..............T16
4148162 ..... VDS202A04090 WU25PD ..............T16
4148163 ..... VDS202A04100 WU25PD ..............T16
4148164 ..... VDS202A04200 WU25PD ..............T16
4148165 ..... VDS202A04217 WU25PD ..............T16
4148166 ..... VDS202A04300 WU25PD ..............T16
4148167 ..... VDS202A04366 WU25PD ..............T17
4148168 ..... VDS202A04400 WU25PD ..............T17
4148169 ..... VDS202A04500 WU25PD ..............T17
4148170 ..... VDS202A04600 WU25PD ..............T17
4148171 ..... VDS202A04623 WU25PD ..............T17
4148172 ..... VDS202A04700 WU25PD ..............T17
4148173 ..... VDS202A04763 WU25PD ..............T17
4148174 ..... VDS202A04800 WU25PD ..............T17
4148175 ..... VDS202A04852 WU25PD ..............T17
4148176 ..... VDS202A04900 WU25PD ..............T17
4148177 ..... VDS202A05000 WU25PD ..............T17
4148178 ..... VDS202A05100 WU25PD ..............T17
4148179 ..... VDS202A05106 WU25PD ..............T17
4148180 ..... VDS202A05159 WU25PD ..............T17
4148181 ..... VDS202A05200 WU25PD ..............T17
4148182 ..... VDS202A05300 WU25PD ..............T17
4148183 ..... VDS202A05400 WU25PD ..............T17
4148184 ..... VDS202A05410 WU25PD ..............T17
4148185 ..... VDS202A05500 WU25PD ..............T17
4148186 ..... VDS202A05558 WU25PD ..............T17
4148187 ..... VDS202A05600 WU25PD ..............T17
4148188 ..... VDS202A05616 WU25PD ..............T17
4148189 ..... VDS202A05700 WU25PD ..............T17
4148190 ..... VDS202A05800 WU25PD ..............T17
4148191 ..... VDS202A05900 WU25PD ..............T17
4148192 ..... VDS202A05954 WU25PD ..............T17
4148193 ..... VDS202A06000 WU25PD ..............T17
4148194 ..... VDS202A06100 WU25PD ..............T17
4148195 ..... VDS202A06200 WU25PD ..............T17
4148196 ..... VDS202A06300 WU25PD ..............T17
4148197 ..... VDS202A06350 WU25PD ..............T17
4148198 ..... VDS202A06400 WU25PD ..............T17
4148199 ..... VDS202A06500 WU25PD ..............T17
4148200 ..... VDS202A06528 WU25PD ..............T17
4148201 ..... VDS202A06600 WU25PD ..............T17
4148202 ..... VDS202A06630 WU25PD ..............T17
4148203 ..... VDS202A06700 WU25PD ..............T17
4148204 ..... VDS202A06746 WU25PD ..............T17
4148205 ..... VDS202A06800 WU25PD ..............T17
4148206 ..... VDS202A06900 WU25PD ..............T17
4148207 ..... VDS202A07000 WU25PD ..............T18
4148208 ..... VDS202A07100 WU25PD ..............T18
4148209 ..... VDS202A07145 WU25PD ..............T18
4148210 ..... VDS202A07200 WU25PD ..............T18
4148211 ..... VDS202A07300 WU25PD ..............T18
4148212 ..... VDS202A07400 WU25PD ..............T18
4148213 ..... VDS202A07500 WU25PD ..............T18
4148214 ..... VDS202A07541 WU25PD ..............T18
4148215 ..... VDS202A07600 WU25PD ..............T18
4148216 ..... VDS202A07700 WU25PD ..............T18
4148217 ..... VDS202A07800 WU25PD ..............T18
4148218 ..... VDS202A07900 WU25PD ..............T18
4148219 ..... VDS202A07938 WU25PD ..............T18
4148220 ..... VDS202A08000 WU25PD ..............T18
4148221 ..... VDS202A08100 WU25PD ..............T18
4148222 ..... VDS202A08200 WU25PD ..............T18
4148223 ..... VDS202A08300 WU25PD ..............T18
4148224 ..... VDS202A08334 WU25PD ..............T18
4148225 ..... VDS202A08400 WU25PD ..............T18
4148226 ..... VDS202A08433 WU25PD ..............T18
4148227 ..... VDS202A08500 WU25PD ..............T18
4148228 ..... VDS202A08600 WU25PD ..............T18
4148229 ..... VDS202A08700 WU25PD ..............T18
4148230 ..... VDS202A08733 WU25PD ..............T18
4148231 ..... VDS202A08800 WU25PD ..............T18
4148232 ..... VDS202A08900 WU25PD ..............T18
4148233 ..... VDS202A09000 WU25PD ..............T18
4148234 ..... VDS202A09100 WU25PD ..............T18
4148235 ..... VDS202A09129 WU25PD ..............T18
4148236 ..... VDS202A09200 WU25PD ..............T18
4148237 ..... VDS202A09300 WU25PD ..............T18
4148238 ..... VDS202A09347 WU25PD ..............T18
4148239 ..... VDS202A09400 WU25PD ..............T18
4148240 ..... VDS202A09500 WU25PD ..............T18
4148241 ..... VDS202A09525 WU25PD ..............T18
4148242 ..... VDS202A09600 WU25PD ..............T18
4148243 ..... VDS202A09700 WU25PD ..............T18
4148244 ..... VDS202A09800 WU25PD ..............T18
4148245 ..... VDS202A09900 WU25PD ..............T18
4148246 ..... VDS202A09921 WU25PD ..............T18
4148258 ..... VDS202A10000 WU25PD ..............T19
4148259 ..... VDS202A10100 WU25PD ..............T19
4148260 ..... VDS202A10200 WU25PD ..............T19
4148261 ..... VDS202A10300 WU25PD ..............T19
4148262 ..... VDS202A10320 WU25PD ..............T19
4148283 ..... VDS202A10400 WU25PD ..............T19
4148284 ..... VDS202A10500 WU25PD ..............T19
4148285 ..... VDS202A10600 WU25PD ..............T19
4148286 ..... VDS202A10700 WU25PD ..............T19
4148287 ..... VDS202A10716 WU25PD ..............T19
4148288 ..... VDS202A10800 WU25PD ..............T19
4148289 ..... VDS202A10900 WU25PD ..............T19
4148290 ..... VDS202A11000 WU25PD ..............T19
4148291 ..... VDS202A11100 WU25PD ..............T19
4148292 ..... VDS202A11113 WU25PD ..............T19
4148293 ..... VDS202A11200 WU25PD ..............T19
4148294 ..... VDS202A11300 WU25PD ..............T19
4148295 ..... VDS202A11400 WU25PD ..............T19
4148296 ..... VDS202A11500 WU25PD ..............T19
4148297 ..... VDS202A11509 WU25PD ..............T19
4148298 ..... VDS202A11600 WU25PD ..............T19
4148299 ..... VDS202A11700 WU25PD ..............T19
4148300 ..... VDS202A11800 WU25PD ..............T19
4148301 ..... VDS202A11900 WU25PD ..............T19
4148302 ..... VDS202A11908 WU25PD ..............T19
Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 41 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRAND O b 28 2015 3 09 PM
Z42 widia.com
Index by Order Number
Order No. Catalogue No. Page(s)
4148303 ..... VDS202A18200 WU25PD ..............T21
4148304 ..... VDS202A18258 WU25PD ..............T21
4148305 ..... VDS202A18300 WU25PD ..............T21
4148306 ..... VDS202A18400 WU25PD ..............T21
4148307 ..... VDS202A18500 WU25PD ..............T21
4148308 ..... VDS202A18600 WU25PD ..............T21
4148309 ..... VDS202A18654 WU25PD ..............T21
4148310 ..... VDS202A18700 WU25PD ..............T21
4148311 ..... VDS202A18800 WU25PD ..............T21
4148312 ..... VDS202A18900 WU25PD ..............T21
4148313 ..... VDS202A12000 WU25PD ..............T19
4148314 ..... VDS202A12100 WU25PD ..............T19
4148315 ..... VDS202A12200 WU25PD ..............T19
4148316 ..... VDS202A12300 WU25PD ..............T19
4148317 ..... VDS202A12304 WU25PD ..............T19
4148318 ..... VDS202A12400 WU25PD ..............T19
4148319 ..... VDS202A12500 WU25PD ..............T19
4148320 ..... VDS202A12600 WU25PD ..............T19
4148321 ..... VDS202A12700 WU25PD ..............T19
4148322 ..... VDS202A12800 WU25PD ..............T19
4148323 ..... VDS202A19000 WU25PD ..............T21
4148324 ..... VDS202A19050 WU25PD ..............T21
4148325 ..... VDS202A19100 WU25PD ..............T21
4148326 ..... VDS202A19200 WU25PD ..............T21
4148327 ..... VDS202A19300 WU25PD ..............T21
4148328 ..... VDS202A19400 WU25PD ..............T21
4148329 ..... VDS202A19500 WU25PD ..............T21
4148330 ..... VDS202A19600 WU25PD ..............T21
4148331 ..... VDS202A19700 WU25PD ..............T21
4148332 ..... VDS202A19800 WU25PD ..............T21
4148333 ..... VDS202A19900 WU25PD ..............T21
4148334 ..... VDS202A20000 WU25PD ..............T21
4148335 ..... VDS202F03000 WU25PD...............T34
4148336 ..... VDS202F03100 WU25PD...............T34
4148337 ..... VDS202F03200 WU25PD...............T34
4148338 ..... VDS202F03300 WU25PD...............T34
4148339 ..... VDS202F03400 WU25PD...............T34
4148340 ..... VDS202F03500 WU25PD...............T34
4148341 ..... VDS202F03600 WU25PD...............T34
4148342 ..... VDS202F03700 WU25PD...............T34
4148343 ..... VDS202A12900 WU25PD ..............T19
4148344 ..... VDS202A13000 WU25PD ..............T19
4148345 ..... VDS202A13096 WU25PD ..............T19
4148346 ..... VDS202A13100 WU25PD ..............T19
4148347 ..... VDS202A13200 WU25PD ..............T19
4148348 ..... VDS202A13300 WU25PD ..............T20
4148349 ..... VDS202A13400 WU25PD ..............T20
4148350 ..... VDS202A13500 WU25PD ..............T20
4148351 ..... VDS202A13600 WU25PD ..............T20
4148352 ..... VDS202A13700 WU25PD ..............T20
4148353 ..... VDS202A13800 WU25PD ..............T20
4148354 ..... VDS202A13891 WU25PD ..............T20
4148355 ..... VDS202A13900 WU25PD ..............T20
4148356 ..... VDS202A14000 WU25PD ..............T20
4148357 ..... VDS202A14100 WU25PD ..............T20
4148358 ..... VDS202A14200 WU25PD ..............T20
4148359 ..... VDS202A14288 WU25PD ..............T20
4148360 ..... VDS202A14300 WU25PD ..............T20
4148361 ..... VDS202A14400 WU25PD ..............T20
4148362 ..... VDS202A14500 WU25PD ..............T20
4148363 ..... VDS202A14600 WU25PD ..............T20
4148364 ..... VDS202A14684 WU25PD ..............T20
4148365 ..... VDS202A14700 WU25PD ..............T20
4148366 ..... VDS202A14800 WU25PD ..............T20
4148367 ..... VDS202A14900 WU25PD ..............T20
4148368 ..... VDS202A15000 WU25PD ..............T20
4148369 ..... VDS202A15083 WU25PD ..............T20
4148370 ..... VDS202A15100 WU25PD ..............T20
4148371 ..... VDS202A15200 WU25PD ..............T20
4148372 ..... VDS202A15300 WU25PD ..............T20
4148373 ..... VDS202A15400 WU25PD ..............T20
4148374 ..... VDS202A15479 WU25PD ..............T20
4148375 ..... VDS202A15500 WU25PD ..............T20
4148376 ..... VDS202A15600 WU25PD ..............T20
4148377 ..... VDS202A15700 WU25PD ..............T20
4148378 ..... VDS202A15800 WU25PD ..............T20
4148379 ..... VDS202A15875 WU25PD ..............T20
4148380 ..... VDS202A15900 WU25PD ..............T20
4148381 ..... VDS202A16000 WU25PD ..............T20
4148382 ..... VDS202A16100 WU25PD ..............T20
4148383 ..... VDS202A16200 WU25PD ..............T20
4148384 ..... VDS202A16271 WU25PD ..............T20
4148385 ..... VDS202A16300 WU25PD ..............T20
4148386 ..... VDS202A16400 WU25PD ..............T20
4148387 ..... VDS202A16500 WU25PD ..............T20
4148388 ..... VDS202A16600 WU25PD ..............T21
4148389 ..... VDS202A16670 WU25PD ..............T21
4148390 ..... VDS202A16700 WU25PD ..............T21
4148391 ..... VDS202A16800 WU25PD ..............T21
4148392 ..... VDS202A16900 WU25PD ..............T21
4148393 ..... VDS202A17000 WU25PD ..............T21
4148394 ..... VDS202A17100 WU25PD ..............T21
4148395 ..... VDS202A17200 WU25PD ..............T21
4148396 ..... VDS202A17300 WU25PD ..............T21
4148397 ..... VDS202A17400 WU25PD ..............T21
4148398 ..... VDS202A17463 WU25PD ..............T21
4148399 ..... VDS202A17500 WU25PD ..............T21
4148400 ..... VDS202A17600 WU25PD ..............T21
4148401 ..... VDS202A17700 WU25PD ..............T21
4148402 ..... VDS202A17800 WU25PD ..............T21
4148403 ..... VDS202A17859 WU25PD ..............T21
4148404 ..... VDS202A17900 WU25PD ..............T21
4148405 ..... VDS202F10000 WU25PD...............T36
4148406 ..... VDS202F10100 WU25PD...............T36
4148407 ..... VDS202F10200 WU25PD...............T36
4148408 ..... VDS202F10300 WU25PD...............T36
4148409 ..... VDS202F10400 WU25PD...............T36
4148410 ..... VDS202F10500 WU25PD...............T36
4148411 ..... VDS202F10600 WU25PD...............T36
4148412 ..... VDS202F10700 WU25PD...............T36
4148413 ..... VDS202F03800 WU25PD...............T34
4148414 ..... VDS202F03900 WU25PD...............T34
4148415 ..... VDS202F04000 WU25PD...............T34
4148416 ..... VDS202F04100 WU25PD...............T34
4148417 ..... VDS202F04200 WU25PD...............T34
4148418 ..... VDS202F04300 WU25PD...............T34
4148419 ..... VDS202F04400 WU25PD...............T34
4148420 ..... VDS202F04500 WU25PD...............T34
4148421 ..... VDS202F04600 WU25PD...............T34
4148422 ..... VDS202F04700 WU25PD...............T34
4148423 ..... VDS202F04800 WU25PD...............T34
4148424 ..... VDS202F04900 WU25PD...............T34
4148425 ..... VDS202F05000 WU25PD...............T34
4148426 ..... VDS202F05100 WU25PD...............T34
4148427 ..... VDS202F05200 WU25PD...............T34
4148428 ..... VDS202F05300 WU25PD...............T34
4148429 ..... VDS202F05400 WU25PD...............T35
4148430 ..... VDS202F05500 WU25PD...............T35
4148431 ..... VDS202F05600 WU25PD...............T35
4148432 ..... VDS202F05700 WU25PD...............T35
4148433 ..... VDS202F05800 WU25PD...............T35
4148434 ..... VDS202F05900 WU25PD...............T35
4148435 ..... VDS202F06000 WU25PD...............T35
4148436 ..... VDS202F06100 WU25PD...............T35
4148437 ..... VDS202F06200 WU25PD...............T35
4148438 ..... VDS202F06300 WU25PD...............T35
4148439 ..... VDS202F06400 WU25PD...............T35
4148440 ..... VDS202F06500 WU25PD...............T35
4148441 ..... VDS202F06600 WU25PD...............T35
4148442 ..... VDS202F06700 WU25PD...............T35
4148443 ..... VDS202F06800 WU25PD...............T35
4148444 ..... VDS202F06900 WU25PD...............T35
4148445 ..... VDS202F07000 WU25PD...............T35
4148446 ..... VDS202F07100 WU25PD...............T35
4148447 ..... VDS202F07200 WU25PD...............T35
4148448 ..... VDS202F07300 WU25PD...............T35
4148449 ..... VDS202F07400 WU25PD...............T35
4148450 ..... VDS202F07500 WU25PD...............T35
4148451 ..... VDS202F07600 WU25PD...............T35
4148452 ..... VDS202F07700 WU25PD...............T35
4148453 ..... VDS202F07800 WU25PD...............T35
4148454 ..... VDS202F07900 WU25PD...............T35
4148455 ..... VDS202F08000 WU25PD...............T35
4148456 ..... VDS202F08100 WU25PD...............T35
4148457 ..... VDS202F08200 WU25PD...............T35
4148458 ..... VDS202F08300 WU25PD...............T35
4148459 ..... VDS202F08400 WU25PD...............T35
4148460 ..... VDS202F08500 WU25PD...............T35
4148461 ..... VDS202F08600 WU25PD...............T35
4148462 ..... VDS202F08700 WU25PD...............T35
4148463 ..... VDS202F08800 WU25PD...............T35
4148464 ..... VDS202F08900 WU25PD...............T35
4148465 ..... VDS202F09000 WU25PD...............T35
4148466 ..... VDS202F09100 WU25PD...............T35
4148467 ..... VDS202F09200 WU25PD...............T35
4148468 ..... VDS202F09300 WU25PD...............T35
4148469 ..... VDS202F09400 WU25PD...............T36
4148470 ..... VDS202F09500 WU25PD...............T36
4148471 ..... VDS202F09600 WU25PD...............T36
4148472 ..... VDS202F09700 WU25PD...............T36
4148473 ..... VDS202F09800 WU25PD...............T36
4148474 ..... VDS202F09900 WU25PD...............T36
4148483 ..... VDS202F10800 WU25PD...............T36
4148484 ..... VDS202F10900 WU25PD...............T36
4148485 ..... VDS202F11000 WU25PD...............T36
4148486 ..... VDS202F11100 WU25PD...............T36
4148487 ..... VDS202F11200 WU25PD...............T36
4148488 ..... VDS202F11300 WU25PD...............T36
4148489 ..... VDS202F11400 WU25PD...............T36
4148490 ..... VDS202F11500 WU25PD...............T36
4148491 ..... VDS202F11600 WU25PD...............T36
4148492 ..... VDS202F11700 WU25PD...............T36
4148493 ..... VDS202F11800 WU25PD...............T36
4148494 ..... VDS202F11900 WU25PD...............T36
4148495 ..... VDS202F12000 WU25PD...............T36
4148496 ..... VDS202F12100 WU25PD...............T36
4148497 ..... VDS202F12200 WU25PD...............T36
4148498 ..... VDS202F12300 WU25PD...............T36
4148499 ..... VDS202F12400 WU25PD...............T36
4148500 ..... VDS202F12500 WU25PD...............T36
4148501 ..... VDS202F12600 WU25PD...............T36
4148502 ..... VDS202F12700 WU25PD...............T36
4148503 ..... VDS202F12800 WU25PD...............T36
4148504 ..... VDS202F12900 WU25PD...............T36
4148505 ..... VDS202F13000 WU25PD...............T36
4148506 ..... VDS202F13100 WU25PD...............T36
4148507 ..... VDS202F13200 WU25PD...............T36
4148508 ..... VDS202F13300 WU25PD...............T36
4148509 ..... VDS202F13400 WU25PD...............T37
4148510 ..... VDS202F13500 WU25PD...............T37
4148511 ..... VDS202F13600 WU25PD...............T37
4148512 ..... VDS202F13700 WU25PD...............T37
4148513 ..... VDS202F13800 WU25PD...............T37
4148514 ..... VDS202F13900 WU25PD...............T37
4148515 ..... VDS202F14000 WU25PD...............T37
4148516 ..... VDS202F14100 WU25PD...............T37
4148517 ..... VDS202F14200 WU25PD...............T37
4148518 ..... VDS202F14300 WU25PD...............T37
4148519 ..... VDS202F14400 WU25PD...............T37
4148520 ..... VDS202F14500 WU25PD...............T37
4148521 ..... VDS202F14600 WU25PD...............T37
4148522 ..... VDS202F14700 WU25PD...............T37
4148523 ..... VDS202F14800 WU25PD...............T37
4148524 ..... VDS202F14900 WU25PD...............T37
4148525 ..... VDS202F15000 WU25PD...............T37
4148526 ..... VDS202F15100 WU25PD...............T37
4148527 ..... VDS202F15200 WU25PD...............T37
4148528 ..... VDS202F15300 WU25PD...............T37
4148529 ..... VDS202F15400 WU25PD...............T37
4148530 ..... VDS202F15500 WU25PD...............T37
4148531 ..... VDS202F15600 WU25PD...............T37
4148532 ..... VDS202F15700 WU25PD...............T37
4148533 ..... VDS202F15800 WU25PD...............T37
4148534 ..... VDS202F15900 WU25PD...............T37
4148535 ..... VDS202F16000 WU25PD...............T37
4148536 ..... VDS202F16100 WU25PD...............T37
4148537 ..... VDS202F16200 WU25PD...............T37
4148538 ..... VDS202F16300 WU25PD...............T37
4148539 ..... VDS202F16400 WU25PD...............T37
4148540 ..... VDS202F16500 WU25PD...............T37
4148541 ..... VDS202F16600 WU25PD...............T37
4148542 ..... VDS202F16700 WU25PD...............T37
4148543 ..... VDS202F16800 WU25PD...............T37
4148544 ..... VDS202F16900 WU25PD...............T37
4148545 ..... VDS202F17000 WU25PD...............T37
4148546 ..... VDS202F17100 WU25PD...............T37
4148547 ..... VDS202F17200 WU25PD...............T37
4148548 ..... VDS202F17300 WU25PD...............T37
4148549 ..... VDS202F17400 WU25PD...............T38
4148550 ..... VDS202F17500 WU25PD...............T38
4148551 ..... VDS202F17600 WU25PD...............T38
4148552 ..... VDS202F17700 WU25PD...............T38
4148553 ..... VDS202F17800 WU25PD...............T38
4148554 ..... VDS202F17900 WU25PD...............T38
4148555 ..... VDS202F18000 WU25PD...............T38
4148556 ..... VDS202F18100 WU25PD...............T38
4148557 ..... VDS202F18200 WU25PD...............T38
4148558 ..... VDS202F18300 WU25PD...............T38
4148559 ..... VDS202F18400 WU25PD...............T38
4148560 ..... VDS202F18500 WU25PD...............T38
4148561 ..... VDS202F18600 WU25PD...............T38
4148562 ..... VDS202F18700 WU25PD...............T38
4148563 ..... VDS202F18800 WU25PD...............T38
4148564 ..... VDS202F18900 WU25PD...............T38
4148565 ..... VDS202F19000 WU25PD...............T38
4148566 ..... VDS202F19100 WU25PD...............T38
4148567 ..... VDS202F19200 WU25PD...............T38
4148568 ..... VDS202F19300 WU25PD...............T38
4148569 ..... VDS202F19400 WU25PD...............T38
4148570 ..... VDS202F19500 WU25PD...............T38
4148571 ..... VDS202F19600 WU25PD...............T38
4148572 ..... VDS202F19700 WU25PD...............T38
4148573 ..... VDS202F19800 WU25PD...............T38
4148574 ..... VDS202F19900 WU25PD...............T38
Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 42 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRANDO b 28 20153 09PM
Z43
widia.com
Index by Order Number
Order No. Catalogue No. Page(s)
4148575 ..... VDS202F20000 WU25PD...............T38
4148906 ..... TDS504A12500 WU20PD ............T102
4148908 ..... TDS202A06800 WP20PD ..............T51
4148983 ..... TDS212A06800 WK15PD ..............T51
4148984 ..... TDS413A12500 WK15PD ..............T71
4152113 ..... M1200HD050Z04HN09 ................ H38
4152114 ..... M1200HD050Z05HN09 ................ H38
4152115 ..... M1200HD063Z04HN09 ................ H38
4152116 ..... M1200HD063Z06HN09 ................ H38
4152117 ..... M1200HD080Z05HN09 ................ H38
4152118 ..... M1200HD080Z08HN09 ................ H38
4152119 ..... M1200HD100Z06HN09 ................ H38
4152120 ..... M1200HD100Z08HN09 ................ H38
4152121 ..... M1200HD125Z08HN09 ................ H38
4152122 ..... M1200HD125Z10HN09 ................ H38
4152123 ..... M1200HD160Z09HN09 ................ H38
4152124 ..... M1200HD160Z12HN09 ................ H38
4152638 ..... GT025001 WP31MG ......................Y33
4152639 ..... GT025002 WP31MG ......................Y33
4152640 ..... GT025003 WP31MG ......................Y33
4152641 ..... GT025004 WP31MG ......................Y33
4152642 ..... GT025005 WP31MG ......................Y33
4152703 ..... GT025006 WP31MG ......................Y33
4152704 ..... GT025007 WP31MG ......................Y33
4152705 ..... GT025008 WP31MG ......................Y33
4152706 ..... GT025009 WP31MG ......................Y33
4152707 ..... GT025010 WP31MG ......................Y33
4152708 ..... GT025011 WP31MG ......................Y33
4152709 ..... GT025012 WP31MG ......................Y33
4152710 ..... GT025013 WP31MG ......................Y33
4152711 ..... GT025014 WP31MG ......................Y33
4152712 ..... GT025015 WP31MG ......................Y33
4152713 ..... GT025016 WP31MG ......................Y33
4152714 ..... GT025017 WP31MG ......................Y33
4152715 ..... GT025018 WP31MG ......................Y33
4153679 ..... GT005001 WP31MG ......................Y10
4153680 ..... GT005002 WP31MG ......................Y10
4153681 ..... GT005003 WP31MG ......................Y10
4153682 ..... GT005004 WP31MG ......................Y10
4153753 ..... GT005005 WP31MG ......................Y10
4153754 ..... GT005006 WP31MG ......................Y10
4153755 ..... GT005007 WP31MG ......................Y10
4153756 ..... GT005008 WP31MG ......................Y10
4153757 ..... GT005009 WP31MG ......................Y10
4153758 ..... GT005010 WP31MG ......................Y10
4153759 ..... GT005011 WP31MG ......................Y10
4153760 ..... GT005012 WP31MG ......................Y10
4153761 ..... GT005013 WP31MG ......................Y10
4153762 ..... GT005014 WP31MG ......................Y10
4153763 ..... GT005015 WP31MG ......................Y10
4153764 ..... GT005016 WP31MG ......................Y10
4153765 ..... GT005017 WP31MG ......................Y10
4153766 ..... GT005018 WP31MG ......................Y10
4153906 ..... GT325001 GP6520 ........................Y24
4153907 ..... GT325002 GP6520 ........................Y24
4153908 ..... GT325003 GP6520 ........................Y24
4153909 ..... GT325004 GP6520 ........................Y24
4153910 ..... GT325005 GP6520 ........................Y24
4153911 ..... GT325006 GP6520 ........................Y24
4153912 ..... GT325007 GP6520 ........................Y24
4153953 ..... GT325008 GP6520 ........................Y24
4153954 ..... GT325009 GP6520 ........................Y24
4153955 ..... GT335001 GP6520 ........................Y25
4153956 ..... GT335002 GP6520 ........................Y25
4153957 ..... GT335003 GP6520 ........................Y25
4153958 ..... GT335004 GP6520 ........................Y25
4153959 ..... GT335005 GP6520 ........................Y25
4153960 ..... GT335006 GP6520 ........................Y25
4153961 ..... GT335007 GP6520 ........................Y25
4153962 ..... GT335008 GP6520 ........................Y25
4153963 ..... GT335009 GP6520 ........................Y25
4154254 ..... GT505001 GP6520 ........................Y26
4154255 ..... GT505002 GP6520 ........................Y26
4154256 ..... GT505003 GP6520 ........................Y26
4154257 ..... GT505004 GP6520 ........................Y26
4154258 ..... GT505005 GP6520 ........................Y26
4154259 ..... GT505006 GP6520 ........................Y27
4154260 ..... GT505007 GP6520 ........................Y27
4154261 ..... GT505008 GP6520 ........................Y27
4154262 ..... GT505009 GP6520 ........................Y27
4154263 ..... GT505010 GP6520 ........................Y27
4154264 ..... GT515001 GP6520 ........................Y28
4154265 ..... GT515002 GP6520 ........................Y28
4154266 ..... GT515003 GP6520 ........................Y28
4154267 ..... GT515004 GP6520 ........................Y28
4154268 ..... GT515005 GP6520 ........................Y28
4154269 ..... GT515006 GP6520 ........................Y29
4154270 ..... GT515007 GP6520 ........................Y29
4154271 ..... GT515008 GP6520 ........................Y29
4154272 ..... GT515009 GP6520 ........................Y29
4154273 ..... GT515010 GP6520 ........................Y29
4154274 ..... GT425001 GP6520 ........................Y54
4154275 ..... GT425002 GP6520 ........................Y54
4154276 ..... GT425003 GP6520 ........................Y54
4154277 ..... GT425004 GP6520 ........................Y54
4154278 ..... GT425005 GP6520 ........................Y54
4154279 ..... GT425006 GP6520 ........................Y54
4154280 ..... GT425007 GP6520 ........................Y54
4154281 ..... GT425008 GP6520 ........................Y54
4154282 ..... GT425009 GP6520 ........................Y54
4154283 ..... GT435001 GP6520 ........................Y55
4154284 ..... GT435002 GP6520 ........................Y55
4154285 ..... GT435003 GP6520 ........................Y55
4154286 ..... GT435004 GP6520 ........................Y55
4154287 ..... GT435005 GP6520 ........................Y55
4154288 ..... GT435006 GP6520 ........................Y55
4154289 ..... GT435007 GP6520 ........................Y55
4154290 ..... GT435008 GP6520 ........................Y55
4154291 ..... GT435009 GP6520 ........................Y55
4154671 ..... GT225001 WN38MG ......................Y62
4154672 ..... GT225002 WN38MG ......................Y62
4154673 ..... GT225003 WN38MG ......................Y62
4154674 ..... GT225004 WN38MG ......................Y62
4154675 ..... GT225005 WN38MG ......................Y62
4154676 ..... GT225006 WN38MG ......................Y62
4154677 ..... GT225007 WN38MG ......................Y62
4154678 ..... GT225008 WN38MG ......................Y62
4154679 ..... GT225009 WN38MG ......................Y62
4154680 ..... GT225010 WN38MG ......................Y62
4154681 ..... GT225011 WN38MG ......................Y62
4154682 ..... GT225012 WN38MG ......................Y62
4154683 ..... GT225013 WN38MG ......................Y62
4154684 ..... GT225014 WN38MG ......................Y62
4154685 ..... GT225015 WN38MG ......................Y62
4156562 ..... TDS411A10000 WK15PD ..............T59
4156602 ..... TDS412A10000 WK15PD ..............T65
4156603 ..... TDS411A10100 WK15PD ..............T59
4156604 ..... TDS411A10200 WK15PD ..............T59
4156605 ..... TDS411A10300 WK15PD ..............T59
4156606 ..... TDS411A10320 WK15PD ..............T59
4156607 ..... TDS411A10400 WK15PD ..............T59
4156608 ..... TDS411A10500 WK15PD ..............T59
4156609 ..... TDS411A10600 WK15PD ..............T59
4156610 ..... TDS411A10700 WK15PD ..............T59
4156611 ..... TDS411A10716 WK15PD ..............T59
4156612 ..... TDS411A10800 WK15PD ..............T59
4156613 ..... TDS411A10900 WK15PD ..............T59
4156614 ..... TDS411A11000 WK15PD ..............T59
4156615 ..... TDS411A11100 WK15PD ..............T59
4156616 ..... TDS411A11113 WK15PD ..............T59
4156617 ..... TDS411A11200 WK15PD ..............T59
4156618 ..... TDS411A11300 WK15PD ..............T59
4156619 ..... TDS411A11400 WK15PD ..............T59
4156620 ..... TDS411A11500 WK15PD ..............T59
4156621 ..... TDS411A11509 WK15PD ..............T59
4156622 ..... TDS411A11600 WK15PD ..............T59
4156623 ..... TDS411A11700 WK15PD ..............T59
4156624 ..... TDS411A11800 WK15PD ..............T59
4156625 ..... TDS411A11900 WK15PD ..............T59
4156626 ..... TDS411A11908 WK15PD ..............T59
4156627 ..... TDS411A12000 WK15PD ..............T59
4156628 ..... TDS411A12100 WK15PD ..............T59
4156629 ..... TDS411A12200 WK15PD ..............T59
4156630 ..... TDS411A12300 WK15PD ..............T59
4156631 ..... TDS411A12304 WK15PD ..............T59
4156632 ..... TDS411A12400 WK15PD ..............T59
4156633 ..... TDS411A12500 WK15PD ..............T59
4156634 ..... TDS411A12600 WK15PD ..............T59
4156635 ..... TDS411A12700 WK15PD ..............T59
4156636 ..... TDS411A12800 WK15PD ..............T59
4156637 ..... TDS411A12900 WK15PD ..............T59
4156638 ..... TDS411A13000 WK15PD ..............T59
4156639 ..... TDS411A13096 WK15PD ..............T59
4156640 ..... TDS411A13100 WK15PD ..............T59
4156641 ..... TDS411A13200 WK15PD ..............T60
4156642 ..... TDS411A13300 WK15PD ..............T60
4156643 ..... TDS411A13400 WK15PD ..............T60
4156644 ..... TDS411A13500 WK15PD ..............T60
4156645 ..... TDS411A13600 WK15PD ..............T60
4156646 ..... TDS411A13700 WK15PD ..............T60
4156647 ..... TDS411A13800 WK15PD ..............T60
4156648 ..... TDS411A13891 WK15PD ..............T60
4156649 ..... TDS411A13900 WK15PD ..............T60
4156650 ..... TDS411A14000 WK15PD ..............T60
4156651 ..... TDS411A14100 WK15PD ..............T60
4156652 ..... TDS411A14200 WK15PD ..............T60
4156653 ..... TDS411A14288 WK15PD ..............T60
4156654 ..... TDS411A14300 WK15PD ..............T60
4156655 ..... TDS411A14400 WK15PD ..............T60
4156656 ..... TDS411A14500 WK15PD ..............T60
4156657 ..... TDS411A14600 WK15PD ..............T60
4156658 ..... TDS411A14684 WK15PD ..............T60
4156659 ..... TDS411A14700 WK15PD ..............T60
4156660 ..... TDS411A14800 WK15PD ..............T60
4156661 ..... TDS411A14900 WK15PD ..............T60
4156662 ..... TDS411A15000 WK15PD ..............T60
4156663 ..... TDS411A15083 WK15PD ..............T60
4156664 ..... TDS411A15100 WK15PD ..............T60
4156665 ..... TDS411A15200 WK15PD ..............T60
4156666 ..... TDS411A15300 WK15PD ..............T60
4156667 ..... TDS411A15400 WK15PD ..............T60
4156668 ..... TDS411A15479 WK15PD ..............T60
4156669 ..... TDS411A15500 WK15PD ..............T60
4156670 ..... TDS411A15600 WK15PD ..............T60
4156671 ..... TDS411A15700 WK15PD ..............T60
4156672 ..... TDS411A15800 WK15PD ..............T60
4156673 ..... TDS411A15875 WK15PD ..............T60
4156674 ..... TDS411A15900 WK15PD ..............T60
4156675 ..... TDS411A16000 WK15PD ..............T60
4156676 ..... TDS411A16100 WK15PD ..............T60
4156677 ..... TDS411A16200 WK15PD ..............T60
4156678 ..... TDS411A16271 WK15PD ..............T60
4156679 ..... TDS411A16300 WK15PD ..............T60
4156680 ..... TDS411A16400 WK15PD ..............T60
4156681 ..... TDS411A16500 WK15PD ..............T61
4156682 ..... TDS411A16600 WK15PD ..............T61
4156683 ..... TDS411A16670 WK15PD ..............T61
4156684 ..... TDS411A16700 WK15PD ..............T61
4156685 ..... TDS411A16800 WK15PD ..............T61
4156686 ..... TDS411A16900 WK15PD ..............T61
4156687 ..... TDS411A17000 WK15PD ..............T61
4156688 ..... TDS411A17100 WK15PD ..............T61
4156689 ..... TDS411A17200 WK15PD ..............T61
4156690 ..... TDS411A17300 WK15PD ..............T61
4156691 ..... TDS411A17400 WK15PD ..............T61
4156692 ..... TDS411A17463 WK15PD ..............T61
4156693 ..... TDS411A17500 WK15PD ..............T61
4156694 ..... TDS411A17600 WK15PD ..............T61
4156695 ..... TDS411A17700 WK15PD ..............T61
4156696 ..... TDS411A17800 WK15PD ..............T61
4156697 ..... TDS411A17859 WK15PD ..............T61
4156698 ..... TDS411A17900 WK15PD ..............T61
4156699 ..... TDS411A18000 WK15PD ..............T61
4156700 ..... TDS411A18100 WK15PD ..............T61
4156701 ..... TDS411A18200 WK15PD ..............T61
4156702 ..... TDS411A18258 WK15PD ..............T61
4156713 ..... TDS411A18300 WK15PD ..............T61
4156714 ..... TDS411A18400 WK15PD ..............T61
4156715 ..... TDS411A18500 WK15PD ..............T61
4156716 ..... TDS411A18600 WK15PD ..............T61
4156717 ..... TDS411A18654 WK15PD ..............T61
4156718 ..... TDS411A18700 WK15PD ..............T61
4156719 ..... TDS411A18800 WK15PD ..............T61
4156720 ..... TDS411A18900 WK15PD ..............T61
4156721 ..... TDS411A19000 WK15PD ..............T61
4156722 ..... TDS411A19050 WK15PD ..............T61
4156723 ..... TDS411A19100 WK15PD ..............T61
4156724 ..... TDS411A19200 WK15PD ..............T61
4156725 ..... TDS411A19300 WK15PD ..............T61
4156726 ..... TDS411A19400 WK15PD ..............T61
4156727 ..... TDS411A19500 WK15PD ..............T61
4156728 ..... TDS411A19600 WK15PD ..............T61
4156729 ..... TDS411A19700 WK15PD ..............T61
4156730 ..... TDS411A19800 WK15PD ..............T61
4156731 ..... TDS411A19900 WK15PD ..............T61
4156732 ..... TDS411A20000 WK15PD ..............T61
4156733 ..... TDS412A10100 WK15PD ..............T65
4156734 ..... TDS412A10200 WK15PD ..............T65
4156735 ..... TDS412A10300 WK15PD ..............T65
4156736 ..... TDS412A10320 WK15PD ..............T65
4156737 ..... TDS412A10400 WK15PD ..............T65
4156738 ..... TDS412A10500 WK15PD ..............T65
4156739 ..... TDS412A10600 WK15PD ..............T65
4156740 ..... TDS412A10700 WK15PD ..............T65
4156741 ..... TDS412A10716 WK15PD ..............T65
4156742 ..... TDS412A10800 WK15PD ..............T65
4156743 ..... TDS412A10900 WK15PD ..............T65
4156744 ..... TDS412A11000 WK15PD ..............T65
4156745 ..... TDS412A11100 WK15PD ..............T65
4156746 ..... TDS412A11113 WK15PD ..............T65
4156747 ..... TDS412A11200 WK15PD ..............T65
4156748 ..... TDS412A11300 WK15PD ..............T65
4156749 ..... TDS412A11400 WK15PD ..............T65
4156750 ..... TDS412A11500 WK15PD ..............T65
Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 43 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRAND O b 28 2015 3 09 PM
Z44 widia.com
Index by Order Number
Order No. Catalogue No. Page(s)
4156751 ..... TDS412A11509 WK15PD ..............T65
4156752 ..... TDS412A11600 WK15PD ..............T65
4156753 ..... TDS412A11700 WK15PD ..............T65
4156754 ..... TDS412A11800 WK15PD ..............T65
4156755 ..... TDS412A11900 WK15PD ..............T65
4156756 ..... TDS412A11908 WK15PD ..............T65
4156757 ..... TDS412A12000 WK15PD ..............T65
4156758 ..... TDS412A12100 WK15PD ..............T65
4156759 ..... TDS412A12200 WK15PD ..............T65
4156760 ..... TDS412A12300 WK15PD ..............T65
4156761 ..... TDS412A12304 WK15PD ..............T65
4156762 ..... TDS412A12400 WK15PD ..............T65
4156763 ..... TDS412A12500 WK15PD ..............T65
4156764 ..... TDS412A12600 WK15PD ..............T65
4156765 ..... TDS412A12700 WK15PD ..............T65
4156766 ..... TDS412A12800 WK15PD ..............T65
4156767 ..... TDS412A12900 WK15PD ..............T65
4156768 ..... TDS412A13000 WK15PD ..............T65
4156769 ..... TDS412A13096 WK15PD ..............T65
4156770 ..... TDS412A13100 WK15PD ..............T65
4156771 ..... TDS412A13200 WK15PD ..............T66
4156772 ..... TDS412A13300 WK15PD ..............T66
4156773 ..... TDS412A13400 WK15PD ..............T66
4156774 ..... TDS412A13500 WK15PD ..............T66
4156775 ..... TDS412A13600 WK15PD ..............T66
4156776 ..... TDS412A13700 WK15PD ..............T66
4156777 ..... TDS412A13800 WK15PD ..............T66
4156778 ..... TDS412A13891 WK15PD ..............T66
4156779 ..... TDS412A13900 WK15PD ..............T66
4156780 ..... TDS412A14000 WK15PD ..............T66
4156781 ..... TDS412A14100 WK15PD ..............T66
4156782 ..... TDS412A14200 WK15PD ..............T66
4156783 ..... TDS412A14288 WK15PD ..............T66
4156784 ..... TDS412A14300 WK15PD ..............T66
4156785 ..... TDS412A14400 WK15PD ..............T66
4156786 ..... TDS412A14500 WK15PD ..............T66
4156787 ..... TDS412A14600 WK15PD ..............T66
4156788 ..... TDS412A14684 WK15PD ..............T66
4156789 ..... TDS412A14700 WK15PD ..............T66
4156790 ..... TDS412A14800 WK15PD ..............T66
4156791 ..... TDS412A14900 WK15PD ..............T66
4156792 ..... TDS412A15000 WK15PD ..............T66
4156793 ..... TDS412A15083 WK15PD ..............T66
4156794 ..... TDS412A15100 WK15PD ..............T66
4156795 ..... TDS412A15200 WK15PD ..............T66
4156796 ..... TDS412A15300 WK15PD ..............T66
4156797 ..... TDS412A15400 WK15PD ..............T66
4156798 ..... TDS412A15479 WK15PD ..............T66
4156799 ..... TDS412A15500 WK15PD ..............T66
4156800 ..... TDS412A15600 WK15PD ..............T66
4156801 ..... TDS412A15700 WK15PD ..............T66
4156802 ..... TDS412A15800 WK15PD ..............T66
4156803 ..... TDS412A15875 WK15PD ..............T66
4156804 ..... TDS412A15900 WK15PD ..............T66
4156805 ..... TDS412A16000 WK15PD ..............T66
4156806 ..... TDS412A16100 WK15PD ..............T66
4156807 ..... TDS412A16200 WK15PD ..............T66
4156808 ..... TDS412A16271 WK15PD ..............T66
4156809 ..... TDS412A16300 WK15PD ..............T66
4156810 ..... TDS412A16400 WK15PD ..............T66
4156811 ..... TDS412A16500 WK15PD ..............T67
4156812 ..... TDS412A16600 WK15PD ..............T67
4156813 ..... TDS412A16670 WK15PD ..............T67
4156814 ..... TDS412A16700 WK15PD ..............T67
4156815 ..... TDS412A16800 WK15PD ..............T67
4156816 ..... TDS412A16900 WK15PD ..............T67
4156817 ..... TDS412A17000 WK15PD ..............T67
4156818 ..... TDS412A17100 WK15PD ..............T67
4156819 ..... TDS412A17200 WK15PD ..............T67
4156820 ..... TDS412A17300 WK15PD ..............T67
4156821 ..... TDS412A17400 WK15PD ..............T67
4156822 ..... TDS412A17463 WK15PD ..............T67
4156823 ..... TDS412A17500 WK15PD ..............T67
4156824 ..... TDS412A17600 WK15PD ..............T67
4156825 ..... TDS412A17700 WK15PD ..............T67
4156826 ..... TDS412A17800 WK15PD ..............T67
4156827 ..... TDS412A17859 WK15PD ..............T67
4156828 ..... TDS412A17900 WK15PD ..............T67
4156836 ..... TDS413A10000 WK15PD ..............T70
4156837 ..... TDS413A10100 WK15PD ..............T70
4156838 ..... TDS413A10200 WK15PD ..............T70
4156839 ..... TDS413A10300 WK15PD ..............T71
4156840 ..... TDS413A10320 WK15PD ..............T71
4156841 ..... TDS413A10400 WK15PD ..............T71
4156842 ..... TDS413A10500 WK15PD ..............T71
4156853 ..... TDS412A18000 WK15PD ..............T67
4156854 ..... TDS412A18100 WK15PD ..............T67
4156855 ..... TDS412A18200 WK15PD ..............T67
4156856 ..... TDS412A18258 WK15PD ..............T67
4156857 ..... TDS412A18300 WK15PD ..............T67
4156858 ..... TDS412A18400 WK15PD ..............T67
4156859 ..... TDS412A18500 WK15PD ..............T67
4156860 ..... TDS412A18600 WK15PD ..............T67
4156861 ..... TDS412A18654 WK15PD ..............T67
4156862 ..... TDS412A18700 WK15PD ..............T67
4156863 ..... TDS412A18800 WK15PD ..............T67
4156864 ..... TDS412A18900 WK15PD ..............T67
4156865 ..... TDS412A19000 WK15PD ..............T67
4156866 ..... TDS412A19050 WK15PD ..............T67
4156867 ..... TDS412A19100 WK15PD ..............T67
4156868 ..... TDS412A19200 WK15PD ..............T67
4156869 ..... TDS412A19300 WK15PD ..............T67
4156870 ..... TDS412A19400 WK15PD ..............T67
4156871 ..... TDS412A19500 WK15PD ..............T67
4156872 ..... TDS412A19600 WK15PD ..............T67
4156873 ..... TDS412A19700 WK15PD ..............T67
4156874 ..... TDS412A19800 WK15PD ..............T67
4156875 ..... TDS412A19900 WK15PD ..............T67
4156876 ..... TDS412A20000 WK15PD ..............T67
4156877 ..... TDG534A18000 WN10HD ............T138
4156878 ..... TDG534A18100 WN10HD ............T138
4156879 ..... TDG534A18200 WN10HD ............T138
4156880 ..... TDG534A18258 WN10HD ............T138
4156881 ..... TDG534A18300 WN10HD ............T138
4156882 ..... TDG534A18400 WN10HD ............T138
4156883 ..... TDS413A10600 WK15PD ..............T71
4156884 ..... TDS413A10700 WK15PD ..............T71
4156885 ..... TDS413A10716 WK15PD ..............T71
4156886 ..... TDS413A10800 WK15PD ..............T71
4156887 ..... TDS413A10900 WK15PD ..............T71
4156888 ..... TDS413A11000 WK15PD ..............T71
4156889 ..... TDS413A11100 WK15PD ..............T71
4156890 ..... TDS413A11113 WK15PD ..............T71
4156891 ..... TDS413A11200 WK15PD ..............T71
4156892 ..... TDS413A11300 WK15PD ..............T71
4156893 ..... TDS413A11400 WK15PD ..............T71
4156894 ..... TDS413A11500 WK15PD ..............T71
4156895 ..... TDS413A11509 WK15PD ..............T71
4156896 ..... TDS413A11600 WK15PD ..............T71
4156897 ..... TDS413A11700 WK15PD ..............T71
4156898 ..... TDS413A11800 WK15PD ..............T71
4156899 ..... TDS413A11900 WK15PD ..............T71
4156900 ..... TDS413A11908 WK15PD ..............T71
4156901 ..... TDS413A12000 WK15PD ..............T71
4156902 ..... TDS413A12100 WK15PD ..............T71
4156903 ..... TDS413A12200 WK15PD ..............T71
4156904 ..... TDS413A12300 WK15PD ..............T71
4156905 ..... TDS413A12304 WK15PD ..............T71
4156906 ..... TDS413A12400 WK15PD ..............T71
4156907 ..... TDS413A12600 WK15PD ..............T71
4156908 ..... TDS413A12700 WK15PD ..............T71
4156909 ..... TDS413A12800 WK15PD ..............T71
4156910 ..... TDS413A12900 WK15PD ..............T71
4156911 ..... TDS413A13000 WK15PD ..............T71
4156912 ..... TDS413A13096 WK15PD ..............T71
4156913 ..... TDS413A13100 WK15PD ..............T71
4156914 ..... TDS413A13200 WK15PD ..............T71
4156915 ..... TDS413A13300 WK15PD ..............T71
4156916 ..... TDS413A13400 WK15PD ..............T71
4156917 ..... TDS413A13500 WK15PD ..............T71
4156918 ..... TDS413A13600 WK15PD ..............T72
4156919 ..... TDS413A13700 WK15PD ..............T72
4156920 ..... TDS413A13800 WK15PD ..............T72
4156921 ..... TDS413A13891 WK15PD ..............T72
4156922 ..... TDS413A13900 WK15PD ..............T72
4156923 ..... TDS413A14000 WK15PD ..............T72
4156924 ..... TDS413A14100 WK15PD ..............T72
4156925 ..... TDS413A14200 WK15PD ..............T72
4156926 ..... TDS413A14288 WK15PD ..............T72
4156927 ..... TDS413A14300 WK15PD ..............T72
4156928 ..... TDS413A14400 WK15PD ..............T72
4156929 ..... TDS413A14500 WK15PD ..............T72
4156930 ..... TDS413A14600 WK15PD ..............T72
4156931 ..... TDS413A14684 WK15PD ..............T72
4156932 ..... TDS413A14700 WK15PD ..............T72
4156933 ..... TDS413A14800 WK15PD ..............T72
4156934 ..... TDS413A14900 WK15PD ..............T72
4156935 ..... TDS413A15000 WK15PD ..............T72
4156936 ..... TDS413A15083 WK15PD ..............T72
4156937 ..... TDS413A15100 WK15PD ..............T72
4156938 ..... TDS413A15200 WK15PD ..............T72
4156939 ..... TDS413A15300 WK15PD ..............T72
4156940 ..... TDS413A15400 WK15PD ..............T72
4156941 ..... TDS413A15479 WK15PD ..............T72
4156942 ..... TDS413A15500 WK15PD ..............T72
4156943 ..... TDS413A15600 WK15PD ..............T72
4156944 ..... TDS413A15700 WK15PD ..............T72
4156945 ..... TDS413A15800 WK15PD ..............T72
4156946 ..... TDS413A15875 WK15PD ..............T72
4156947 ..... TDS413A15900 WK15PD ..............T72
4156948 ..... TDS413A16000 WK15PD ..............T72
4156949 ..... TDS413A16100 WK15PD ..............T72
4156950 ..... TDS413A16200 WK15PD ..............T72
4156951 ..... TDS413A16271 WK15PD ..............T72
4156952 ..... TDS413A16300 WK15PD ..............T72
4156953 ..... TDS413A16400 WK15PD ..............T72
4156954 ..... TDS413A16500 WK15PD ..............T72
4156955 ..... TDS413A16600 WK15PD ..............T72
4156956 ..... TDS413A16670 WK15PD ..............T72
4156957 ..... TDS413A16700 WK15PD ..............T72
4156958 ..... TDS413A16800 WK15PD ..............T73
4156959 ..... TDS413A16900 WK15PD ..............T73
4156960 ..... TDS413A17000 WK15PD ..............T73
4156961 ..... TDS413A17100 WK15PD ..............T73
4156962 ..... TDS413A17200 WK15PD ..............T73
4156963 ..... TDS413A17300 WK15PD ..............T73
4156964 ..... TDS413A17400 WK15PD ..............T73
4156965 ..... TDS413A17463 WK15PD ..............T73
4156966 ..... TDS413A17500 WK15PD ..............T73
4156967 ..... TDS413A17600 WK15PD ..............T73
4156968 ..... TDS413A17700 WK15PD ..............T73
4156969 ..... TDS413A17800 WK15PD ..............T73
4156970 ..... TDS413A17859 WK15PD ..............T73
4156971 ..... TDS413A17900 WK15PD ..............T73
4156972 ..... TDS413A03000 WK15PD ..............T68
4156973 ..... TDG534A18500 WN10HD ............T138
4156974 ..... TDG534A18600 WN10HD ............T138
4156975 ..... TDG534A18654 WN10HD ............T138
4156976 ..... TDG534A18700 WN10HD ............T138
4156977 ..... TDG534A18800 WN10HD ............T138
4156978 ..... TDG534A18900 WN10HD ............T138
4156979 ..... TDG534A19000 WN10HD ............T138
4156980 ..... TDG534A19050 WN10HD ............T138
4156981 ..... TDG534A19100 WN10HD ............T138
4156982 ..... TDG534A19200 WN10HD ............T138
4156983 ..... TDG534A19300 WN10HD ............T138
4156984 ..... TDG534A19400 WN10HD ............T138
4156985 ..... TDG534A19500 WN10HD ............T138
4156986 ..... TDG534A19600 WN10HD ............T138
4156987 ..... TDG534A19700 WN10HD ............T138
4156988 ..... TDG534A19800 WN10HD ............T138
4156989 ..... TDG534A19900 WN10HD ............T138
4156990 ..... TDG534A20000 WN10HD ............T138
4156993 ..... TDS413A03048 WK15PD ..............T68
4156994 ..... TDS413A03100 WK15PD ..............T68
4156995 ..... TDS413A03175 WK15PD ..............T68
4156996 ..... TDS413A03200 WK15PD ..............T68
4156997 ..... TDS413A03264 WK15PD ..............T68
4156998 ..... TDS413A03300 WK15PD ..............T68
4156999 ..... TDS413A03400 WK15PD ..............T68
4157000 ..... TDS413A03455 WK15PD ..............T68
4157001 ..... TDS413A03500 WK15PD ..............T68
4157002 ..... TDS413A03571 WK15PD ..............T68
4157003 ..... TDS413A03600 WK15PD ..............T68
4157004 ..... TDS413A03658 WK15PD ..............T68
4157005 ..... TDS413A03700 WK15PD ..............T68
4157006 ..... TDS413A03734 WK15PD ..............T68
4157007 ..... TDS413A03800 WK15PD ..............T68
4157008 ..... TDS413A03900 WK15PD ..............T68
4157009 ..... TDS413A03970 WK15PD ..............T68
4157010 ..... TDS413A04000 WK15PD ..............T68
4157011 ..... TDS413A04039 WK15PD ..............T68
4157012 ..... TDS413A04090 WK15PD ..............T68
4157013 ..... TDS413A04100 WK15PD ..............T68
4157014 ..... TDS413A04200 WK15PD ..............T68
4157015 ..... TDS413A04217 WK15PD ..............T68
4157016 ..... TDS413A04300 WK15PD ..............T68
4157017 ..... TDS413A04366 WK15PD ..............T68
4157018 ..... TDS413A04400 WK15PD ..............T68
4157019 ..... TDS413A04500 WK15PD ..............T68
4157020 ..... TDS413A04600 WK15PD ..............T69
4157021 ..... TDS413A04623 WK15PD ..............T69
4157022 ..... TDS413A04700 WK15PD ..............T69
4157023 ..... TDS413A04763 WK15PD ..............T69
4157024 ..... TDS413A04800 WK15PD ..............T69
4157025 ..... TDS413A04852 WK15PD ..............T69
4157026 ..... TDS413A04900 WK15PD ..............T69
4157027 ..... TDS413A05000 WK15PD ..............T69
4157028 ..... TDS413A05100 WK15PD ..............T69
4157029 ..... TDS413A05106 WK15PD ..............T69
4157030 ..... TDS413A05159 WK15PD ..............T69
4157031 ..... TDS413A05200 WK15PD ..............T69
4157032 ..... TDS413A05300 WK15PD ..............T69
4157033 ..... TDS413A05400 WK15PD ..............T69
Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 44 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRANDO b 28 20153 09PM
Z45
widia.com
Index by Order Number
Order No. Catalogue No. Page(s)
4157034 ..... TDS413A05410 WK15PD ..............T69
4157035 ..... TDS413A05500 WK15PD ..............T69
4157036 ..... TDS413A05558 WK15PD ..............T69
4157037 ..... TDS413A05600 WK15PD ..............T69
4157038 ..... TDS413A05616 WK15PD ..............T69
4157039 ..... TDS413A05700 WK15PD ..............T69
4157040 ..... TDS413A05800 WK15PD ..............T69
4157041 ..... TDS413A05900 WK15PD ..............T69
4157042 ..... TDS413A05954 WK15PD ..............T69
4157043 ..... TDS413A06000 WK15PD ..............T69
4157044 ..... TDS413A06100 WK15PD ..............T69
4157045 ..... TDS413A06200 WK15PD ..............T69
4157046 ..... TDS413A06300 WK15PD ..............T69
4157047 ..... TDS413A06350 WK15PD ..............T69
4157048 ..... TDS413A06400 WK15PD ..............T69
4157049 ..... TDS413A06500 WK15PD ..............T69
4157050 ..... TDS413A06528 WK15PD ..............T69
4157051 ..... TDS413A06600 WK15PD ..............T69
4157052 ..... TDS413A06630 WK15PD ..............T69
4157053 ..... TDS413A06700 WK15PD ..............T69
4157054 ..... TDS413A06746 WK15PD ..............T69
4157055 ..... TDS413A06800 WK15PD ..............T69
4157056 ..... TDS413A06900 WK15PD ..............T69
4157057 ..... TDS413A07000 WK15PD ..............T69
4157058 ..... TDS413A07100 WK15PD ..............T69
4157059 ..... TDS413A07145 WK15PD ..............T69
4157060 ..... TDS413A07200 WK15PD ..............T70
4157061 ..... TDS413A07300 WK15PD ..............T70
4157062 ..... TDS413A07400 WK15PD ..............T70
4157063 ..... TDS413A07500 WK15PD ..............T70
4157064 ..... TDS413A07541 WK15PD ..............T70
4157065 ..... TDS413A07600 WK15PD ..............T70
4157066 ..... TDS413A07700 WK15PD ..............T70
4157067 ..... TDS413A07800 WK15PD ..............T70
4157068 ..... TDS413A07900 WK15PD ..............T70
4157069 ..... TDS413A07938 WK15PD ..............T70
4157070 ..... TDS413A08000 WK15PD ..............T70
4157071 ..... TDS413A08100 WK15PD ..............T70
4157072 ..... TDS413A08200 WK15PD ..............T70
4157073 ..... TDS413A08300 WK15PD ..............T70
4157074 ..... TDS413A08334 WK15PD ..............T70
4157075 ..... TDS413A08400 WK15PD ..............T70
4157076 ..... TDS413A08433 WK15PD ..............T70
4157077 ..... TDS413A08500 WK15PD ..............T70
4157078 ..... TDS413A08600 WK15PD ..............T70
4157079 ..... TDS413A08700 WK15PD ..............T70
4157080 ..... TDS413A08733 WK15PD ..............T70
4157081 ..... TDS413A08800 WK15PD ..............T70
4157082 ..... TDS413A08900 WK15PD ..............T70
4157083 ..... TDS413A09000 WK15PD ..............T70
4157084 ..... TDS413A09100 WK15PD ..............T70
4157085 ..... TDS413A09129 WK15PD ..............T70
4157086 ..... TDS413A09200 WK15PD ..............T70
4157087 ..... TDS413A09300 WK15PD ..............T70
4157088 ..... TDS413A09347 WK15PD ..............T70
4157089 ..... TDS413A09400 WK15PD ..............T70
4157090 ..... TDS413A09500 WK15PD ..............T70
4157091 ..... TDS413A09525 WK15PD ..............T70
4157092 ..... TDS413A09600 WK15PD ..............T70
4157093 ..... TDS413A09700 WK15PD ..............T70
4157094 ..... TDS413A09800 WK15PD ..............T70
4157095 ..... TDS413A09900 WK15PD ..............T70
4157096 ..... TDS413A09921 WK15PD ..............T70
4157206 ..... TDS413A18000 WK15PD ..............T73
4157207 ..... TDS413A18100 WK15PD ..............T73
4157208 ..... TDS413A18200 WK15PD ..............T73
4157209 ..... TDS413A18258 WK15PD ..............T73
4157210 ..... TDS413A18300 WK15PD ..............T73
4157211 ..... TDS413A18400 WK15PD ..............T73
4157212 ..... TDS413A18500 WK15PD ..............T73
4157253 ..... TDS413A18600 WK15PD ..............T73
4157254 ..... TDS413A18654 WK15PD ..............T73
4157255 ..... TDS413A18700 WK15PD ..............T73
4157256 ..... TDS413A18800 WK15PD ..............T73
4157257 ..... TDS413A18900 WK15PD ..............T73
4157258 ..... TDS413A19000 WK15PD ..............T73
4157259 ..... TDS413A19050 WK15PD ..............T73
4157260 ..... TDS413A19100 WK15PD ..............T73
4157261 ..... TDS413A19200 WK15PD ..............T73
4157262 ..... TDS413A19300 WK15PD ..............T73
4157263 ..... TDS413A19400 WK15PD ..............T73
4157264 ..... TDS413A19500 WK15PD ..............T73
4157265 ..... TDS413A19600 WK15PD ..............T73
4157266 ..... TDS413A19700 WK15PD ..............T73
4157267 ..... TDS413A19800 WK15PD ..............T73
4157268 ..... TDS413A19900 WK15PD ..............T73
4157269 ..... TDS413A20000 WK15PD ..............T73
4157333 ..... TDG533A18000 WN10HD ............T132
4157334 ..... TDG533A18100 WN10HD ............T132
4157335 ..... TDG533A18200 WN10HD ............T132
4157336 ..... TDG533A18258 WN10HD ............T132
4157337 ..... TDG533A18300 WN10HD ............T132
4157338 ..... TDG533A18400 WN10HD ............T132
4157339 ..... TDG533A18500 WN10HD ............T132
4157340 ..... TDG533A18600 WN10HD ............T132
4157341 ..... TDG533A18654 WN10HD ............T132
4157342 ..... TDG533A18700 WN10HD ............T132
4157343 ..... TDG533A18800 WN10HD ............T132
4157344 ..... TDG533A18900 WN10HD ............T132
4157345 ..... TDG533A19000 WN10HD ............T132
4157346 ..... TDG533A19050 WN10HD ............T132
4157347 ..... TDG533A19100 WN10HD ............T132
4157348 ..... TDG533A19200 WN10HD ............T132
4157349 ..... TDG533A19300 WN10HD ............T132
4157350 ..... TDG533A19400 WN10HD ............T132
4157351 ..... TDG533A19500 WN10HD ............T132
4157352 ..... TDG533A19600 WN10HD ............T132
4157353 ..... TDG533A19700 WN10HD ............T132
4157354 ..... TDG533A19800 WN10HD ............T132
4157355 ..... TDG533A19900 WN10HD ............T132
4157356 ..... TDG533A20000 WN10HD ............T132
4157357 ..... TDG534A03000 WN10HD ............T133
4157358 ..... TDG534A03048 WN10HD ............T133
4157359 ..... TDG534A03100 WN10HD ............T133
4157360 ..... TDG534A03175 WN10HD ............T133
4157361 ..... TDG534A03200 WN10HD ............T133
4157362 ..... TDG534A03264 WN10HD ............T133
4157363 ..... TDG534A03300 WN10HD ............T133
4157364 ..... TDG534A03400 WN10HD ............T133
4157365 ..... TDG534A03455 WN10HD ............T133
4157366 ..... TDG534A03500 WN10HD ............T133
4157367 ..... TDG534A03571 WN10HD ............T133
4157368 ..... TDG534A03600 WN10HD ............T133
4157369 ..... TDG534A03658 WN10HD ............T133
4157370 ..... TDG534A03700 WN10HD ............T133
4157371 ..... TDG534A03734 WN10HD ............T133
4157372 ..... TDG534A03800 WN10HD ............T133
4157373 ..... TDG534A03900 WN10HD ............T133
4157374 ..... TDG534A03970 WN10HD ............T133
4157375 ..... TDG534A04000 WN10HD ............T133
4157376 ..... TDG534A04039 WN10HD ............T133
4157377 ..... TDG534A04090 WN10HD ............T133
4157378 ..... TDG534A04100 WN10HD ............T133
4157379 ..... TDG534A04200 WN10HD ............T133
4157380 ..... TDG534A04217 WN10HD ............T133
4157381 ..... TDG534A04300 WN10HD ............T134
4157382 ..... TDG534A04366 WN10HD ............T134
4157383 ..... TDG534A04400 WN10HD ............T134
4157384 ..... TDG534A04500 WN10HD ............T134
4157385 ..... TDG534A04600 WN10HD ............T134
4157386 ..... TDG534A04623 WN10HD ............T134
4157387 ..... TDG534A04700 WN10HD ............T134
4157388 ..... TDG534A04763 WN10HD ............T134
4157389 ..... TDG534A04800 WN10HD ............T134
4157390 ..... TDG534A04852 WN10HD ............T134
4157391 ..... TDG534A04900 WN10HD ............T134
4157392 ..... TDG534A05000 WN10HD ............T134
4157393 ..... TDG534A05100 WN10HD ............T134
4157394 ..... TDG534A05106 WN10HD ............T134
4157395 ..... TDG534A05159 WN10HD ............T134
4157396 ..... TDG534A05200 WN10HD ............T134
4157397 ..... TDG534A05300 WN10HD ............T134
4157398 ..... TDG534A05400 WN10HD ............T134
4157399 ..... TDG534A05410 WN10HD ............T134
4157400 ..... TDG534A05500 WN10HD ............T134
4157401 ..... TDG534A05558 WN10HD ............T134
4157402 ..... TDG534A05600 WN10HD ............T134
4157403 ..... TDG534A05616 WN10HD ............T134
4157404 ..... TDG534A05700 WN10HD ............T134
4157405 ..... TDG534A05800 WN10HD ............T134
4157406 ..... TDG534A05900 WN10HD ............T134
4157407 ..... TDG534A05954 WN10HD ............T134
4157408 ..... TDG534A06000 WN10HD ............T134
4157409 ..... TDG534A06100 WN10HD ............T134
4157410 ..... TDG534A06200 WN10HD ............T134
4157411 ..... TDG534A06300 WN10HD ............T134
4157412 ..... TDG534A06350 WN10HD ............T134
4157413 ..... TDG534A06400 WN10HD ............T134
4157414 ..... TDG534A06500 WN10HD ............T134
4157415 ..... TDG534A06528 WN10HD ............T134
4157416 ..... TDG534A06600 WN10HD ............T134
4157417 ..... TDG534A06630 WN10HD ............T134
4157418 ..... TDG534A06700 WN10HD ............T134
4157419 ..... TDG534A06746 WN10HD ............T134
4157420 ..... TDG534A06800 WN10HD ............T134
4157421 ..... TDG534A06900 WN10HD ............T135
4157422 ..... TDG534A07000 WN10HD ............T135
4157423 ..... TDG534A07100 WN10HD ............T135
4157424 ..... TDG534A07145 WN10HD ............T135
4157425 ..... TDG534A07200 WN10HD ............T135
4157426 ..... TDG534A07300 WN10HD ............T135
4157427 ..... TDG534A07400 WN10HD ............T135
4157428 ..... TDG534A07500 WN10HD ............T135
4157429 ..... TDG534A07541 WN10HD ............T135
4157430 ..... TDG534A07600 WN10HD ............T135
4157431 ..... TDG534A07700 WN10HD ............T135
4157432 ..... TDG534A07800 WN10HD ............T135
4157433 ..... TDG534A07900 WN10HD ............T135
4157434 ..... TDG534A07938 WN10HD ............T135
4157435 ..... TDG534A08000 WN10HD ............T135
4157436 ..... TDG534A08100 WN10HD ............T135
4157437 ..... TDG534A08200 WN10HD ............T135
4157438 ..... TDG534A08300 WN10HD ............T135
4157439 ..... TDG534A08334 WN10HD ............T135
4157440 ..... TDG534A08400 WN10HD ............T135
4157441 ..... TDG534A08433 WN10HD ............T135
4157442 ..... TDG534A08500 WN10HD ............T135
4157443 ..... TDG534A08600 WN10HD ............T135
4157444 ..... TDG534A08700 WN10HD ............T135
4157445 ..... TDG534A08733 WN10HD ............T135
4157446 ..... TDG534A08800 WN10HD ............T135
4157447 ..... TDG534A08900 WN10HD ............T135
4157448 ..... TDG534A09000 WN10HD ............T135
4157449 ..... TDG534A09100 WN10HD ............T135
4157450 ..... TDG534A09129 WN10HD ............T135
4157451 ..... TDG534A09200 WN10HD ............T135
4157452 ..... TDG534A09300 WN10HD ............T135
4157453 ..... TDG534A09347 WN10HD ............T135
4157454 ..... TDG534A09400 WN10HD ............T135
4157455 ..... TDG534A09500 WN10HD ............T135
4157456 ..... TDG534A09525 WN10HD ............T135
4157457 ..... TDG534A09600 WN10HD ............T135
4157458 ..... TDG534A09700 WN10HD ............T135
4157459 ..... TDG534A09800 WN10HD ............T135
4157460 ..... TDG534A09900 WN10HD ............T135
4157461 ..... TDG534A09921 WN10HD ............T136
4157476 ..... TDG534A10000 WN10HD ............T136
4157555 ..... TDG534A10100 WN10HD ............T136
4157556 ..... TDG534A10200 WN10HD ............T136
4157557 ..... TDG534A10300 WN10HD ............T136
4157558 ..... TDG534A10320 WN10HD ............T136
4157559 ..... TDG534A10400 WN10HD ............T136
4157560 ..... TDG534A10500 WN10HD ............T136
4157561 ..... TDG534A10600 WN10HD ............T136
4157562 ..... TDG534A10700 WN10HD ............T136
4157583 ..... TDG534A10716 WN10HD ............T136
4157584 ..... TDG534A10800 WN10HD ............T136
4157585 ..... TDG534A10900 WN10HD ............T136
4157586 ..... TDG534A11000 WN10HD ............T136
4157587 ..... TDG534A11100 WN10HD ............T136
4157588 ..... TDG534A11113 WN10HD ............T136
4157589 ..... TDG534A11200 WN10HD ............T136
4157590 ..... TDG534A11300 WN10HD ............T136
4157591 ..... TDG534A11400 WN10HD ............T136
4157592 ..... TDG534A11500 WN10HD ............T136
4157593 ..... TDG534A11509 WN10HD ............T136
4157594 ..... TDG534A11600 WN10HD ............T136
4157595 ..... TDG534A11700 WN10HD ............T136
4157596 ..... TDG534A11800 WN10HD ............T136
4157597 ..... TDG534A11900 WN10HD ............T136
4157598 ..... TDG534A11908 WN10HD ............T136
4157599 ..... TDG534A12000 WN10HD ............T136
4157600 ..... TDG534A12100 WN10HD ............T136
4157601 ..... TDG534A12200 WN10HD ............T136
4157602 ..... TDG534A12300 WN10HD ............T136
4157603 ..... TDG534A12304 WN10HD ............T136
4157604 ..... TDG534A12400 WN10HD ............T136
4157605 ..... TDG534A12500 WN10HD ............T136
4157606 ..... TDG534A12600 WN10HD ............T136
4157607 ..... TDG534A12700 WN10HD ............T136
4157608 ..... TDG534A12800 WN10HD ............T136
4157609 ..... TDG534A12900 WN10HD ............T136
4157610 ..... TDG534A13000 WN10HD ............T136
4157611 ..... TDG534A13096 WN10HD ............T136
4157612 ..... TDG534A13100 WN10HD ............T136
4157613 ..... TDG534A13200 WN10HD ............T137
4157614 ..... TDG534A13300 WN10HD ............T137
4157615 ..... TDG534A13400 WN10HD ............T137
4157616 ..... TDG534A13500 WN10HD ............T137
4157617 ..... TDG534A13600 WN10HD ............T137
4157618 ..... TDG534A13700 WN10HD ............T137
4157619 ..... TDG534A13800 WN10HD ............T137
4157620 ..... TDG534A13891 WN10HD ............T137
4157621 ..... TDG534A13900 WN10HD ............T137
Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 45 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRAND O b 28 2015 3 09 PM
Z46 widia.com
Index by Order Number
Order No. Catalogue No. Page(s)
4157622 ..... TDG534A14000 WN10HD ............T137
4157623 ..... TDG534A14100 WN10HD ............T137
4157624 ..... TDG534A14200 WN10HD ............T137
4157625 ..... TDG534A14288 WN10HD ............T137
4157626 ..... TDG534A14300 WN10HD ............T137
4157627 ..... TDG534A14400 WN10HD ............T137
4157628 ..... TDG534A14500 WN10HD ............T137
4157629 ..... TDG534A14600 WN10HD ............T137
4157630 ..... TDG534A14684 WN10HD ............T137
4157631 ..... TDG534A14700 WN10HD ............T137
4157632 ..... TDG534A14800 WN10HD ............T137
4157633 ..... TDG534A14900 WN10HD ............T137
4157634 ..... TDG534A15000 WN10HD ............T137
4157635 ..... TDG534A15083 WN10HD ............T137
4157636 ..... TDG534A15100 WN10HD ............T137
4157637 ..... TDG534A15200 WN10HD ............T137
4157638 ..... TDG534A15300 WN10HD ............T137
4157639 ..... TDG534A15400 WN10HD ............T137
4157640 ..... TDG534A15479 WN10HD ............T137
4157641 ..... TDG534A15500 WN10HD ............T137
4157642 ..... TDG534A15600 WN10HD ............T137
4157643 ..... TDG534A15700 WN10HD ............T137
4157644 ..... TDG534A15800 WN10HD ............T137
4157645 ..... TDG534A15875 WN10HD ............T137
4157646 ..... TDG534A15900 WN10HD ............T137
4157647 ..... TDG534A16000 WN10HD ............T137
4157648 ..... TDG534A16100 WN10HD ............T137
4157649 ..... TDG534A16200 WN10HD ............T137
4157650 ..... TDG534A16271 WN10HD ............T137
4157651 ..... TDG534A16300 WN10HD ............T137
4157652 ..... TDG534A16400 WN10HD ............T138
4157653 ..... TDG534A16500 WN10HD ............T138
4157654 ..... TDG534A16600 WN10HD ............T138
4157655 ..... TDG534A16670 WN10HD ............T138
4157656 ..... TDG534A16700 WN10HD ............T138
4157657 ..... TDG534A16800 WN10HD ............T138
4157658 ..... TDG534A16900 WN10HD ............T138
4157659 ..... TDG534A17000 WN10HD ............T138
4157660 ..... TDG534A17100 WN10HD ............T138
4157661 ..... TDG534A17200 WN10HD ............T138
4157662 ..... TDG534A17300 WN10HD ............T138
4157663 ..... TDG534A17400 WN10HD ............T138
4157664 ..... TDG534A17463 WN10HD ............T138
4157665 ..... TDG534A17500 WN10HD ............T138
4157666 ..... TDG534A17600 WN10HD ............T138
4157667 ..... TDG534A17700 WN10HD ............T138
4157668 ..... TDG534A17800 WN10HD ............T138
4157669 ..... TDG534A17859 WN10HD ............T138
4157670 ..... TDG534A17900 WN10HD ............T138
4157671 ..... TDG534A13490 WN10HD ............T137
4157799 ..... TDS411A03000 WK15PD ..............T56
4157800 ..... TDS411A03048 WK15PD ..............T56
4157801 ..... TDS411A03100 WK15PD ..............T56
4157802 ..... TDS411A03175 WK15PD ..............T56
4157803 ..... TDS411A03200 WK15PD ..............T56
4157804 ..... TDS411A03264 WK15PD ..............T56
4157805 ..... TDS411A03300 WK15PD ..............T56
4157806 ..... TDS411A03400 WK15PD ..............T56
4157807 ..... TDS411A03455 WK15PD ..............T56
4157808 ..... TDS411A03500 WK15PD ..............T56
4157809 ..... TDS411A03571 WK15PD ..............T56
4157810 ..... TDS411A03600 WK15PD ..............T56
4157811 ..... TDS411A03658 WK15PD ..............T56
4157812 ..... TDS411A03700 WK15PD ..............T56
4157813 ..... TDS411A03734 WK15PD ..............T56
4157814 ..... TDS411A03800 WK15PD ..............T56
4157815 ..... TDS411A03900 WK15PD ..............T56
4157816 ..... TDS411A03970 WK15PD ..............T56
4157817 ..... TDS411A04000 WK15PD ..............T56
4157818 ..... TDS411A04039 WK15PD ..............T56
4157819 ..... TDS411A04090 WK15PD ..............T56
4157820 ..... TDS411A04100 WK15PD ..............T56
4157821 ..... TDS411A04200 WK15PD ..............T56
4157822 ..... TDS411A04217 WK15PD ..............T56
4157823 ..... TDS411A04300 WK15PD ..............T57
4157824 ..... TDS411A04366 WK15PD ..............T57
4157825 ..... TDS411A04400 WK15PD ..............T57
4157826 ..... TDS411A04500 WK15PD ..............T57
4157827 ..... TDS411A04600 WK15PD ..............T57
4157828 ..... TDS411A04623 WK15PD ..............T57
4157829 ..... TDS411A04700 WK15PD ..............T57
4157830 ..... TDS411A04763 WK15PD ..............T57
4157831 ..... TDS411A04800 WK15PD ..............T57
4157832 ..... TDS411A04852 WK15PD ..............T57
4157833 ..... TDS411A04900 WK15PD ..............T57
4157834 ..... TDS411A05000 WK15PD ..............T57
4157835 ..... TDS411A05100 WK15PD ..............T57
4157836 ..... TDS411A05106 WK15PD ..............T57
4157837 ..... TDS411A05159 WK15PD ..............T57
4157838 ..... TDS411A05200 WK15PD ..............T57
4157839 ..... TDS411A05300 WK15PD ..............T57
4157840 ..... TDS411A05400 WK15PD ..............T57
4157841 ..... TDS411A05410 WK15PD ..............T57
4157842 ..... TDS411A05500 WK15PD ..............T57
4157843 ..... TDS411A05558 WK15PD ..............T57
4157844 ..... TDS411A05600 WK15PD ..............T57
4157845 ..... TDS411A05616 WK15PD ..............T57
4157846 ..... TDS411A05700 WK15PD ..............T57
4157847 ..... TDS411A05800 WK15PD ..............T57
4157848 ..... TDS411A05900 WK15PD ..............T57
4157849 ..... TDS411A05954 WK15PD ..............T57
4157850 ..... TDS411A06000 WK15PD ..............T57
4157851 ..... TDS411A06100 WK15PD ..............T57
4157852 ..... TDS411A06200 WK15PD ..............T57
4157853 ..... TDS411A06300 WK15PD ..............T57
4157854 ..... TDS411A06350 WK15PD ..............T57
4157855 ..... TDS411A06400 WK15PD ..............T57
4157856 ..... TDS411A06500 WK15PD ..............T57
4157857 ..... TDS411A06528 WK15PD ..............T57
4157858 ..... TDS411A06600 WK15PD ..............T57
4157859 ..... TDS411A06630 WK15PD ..............T57
4157860 ..... TDS411A06700 WK15PD ..............T57
4157861 ..... TDS411A06746 WK15PD ..............T57
4157862 ..... TDS411A06800 WK15PD ..............T57
4157863 ..... TDS411A06900 WK15PD ..............T58
4157864 ..... TDS411A07000 WK15PD ..............T58
4157865 ..... TDS411A07100 WK15PD ..............T58
4157866 ..... TDS411A07145 WK15PD ..............T58
4157867 ..... TDS411A07200 WK15PD ..............T58
4157868 ..... TDS411A07300 WK15PD ..............T58
4157869 ..... TDS411A07400 WK15PD ..............T58
4157870 ..... TDS411A07500 WK15PD ..............T58
4157871 ..... TDS411A07541 WK15PD ..............T58
4157872 ..... TDS411A07600 WK15PD ..............T58
4157873 ..... TDS411A07700 WK15PD ..............T58
4157874 ..... TDS411A07800 WK15PD ..............T58
4157875 ..... TDS411A07900 WK15PD ..............T58
4157876 ..... TDS411A07938 WK15PD ..............T58
4157877 ..... TDS411A08000 WK15PD ..............T58
4157878 ..... TDS411A08100 WK15PD ..............T58
4157879 ..... TDS411A08200 WK15PD ..............T58
4157880 ..... TDS411A08300 WK15PD ..............T58
4157881 ..... TDS411A08334 WK15PD ..............T58
4157882 ..... TDS411A08400 WK15PD ..............T58
4157883 ..... TDS411A08433 WK15PD ..............T58
4157884 ..... TDS411A08500 WK15PD ..............T58
4157885 ..... TDS411A08600 WK15PD ..............T58
4157886 ..... TDS411A08700 WK15PD ..............T58
4157887 ..... TDS411A08733 WK15PD ..............T58
4157888 ..... TDS411A08800 WK15PD ..............T58
4157889 ..... TDS411A08900 WK15PD ..............T58
4157890 ..... TDS411A09000 WK15PD ..............T58
4157891 ..... TDS411A09100 WK15PD ..............T58
4157892 ..... TDS411A09129 WK15PD ..............T58
4157893 ..... TDS411A09200 WK15PD ..............T58
4157894 ..... TDS411A09300 WK15PD ..............T58
4157895 ..... TDS411A09347 WK15PD ..............T58
4157896 ..... TDS411A09400 WK15PD ..............T58
4157897 ..... TDS411A09500 WK15PD ..............T58
4157898 ..... TDS411A09525 WK15PD ..............T58
4157899 ..... TDS411A09600 WK15PD ..............T58
4157900 ..... TDS411A09700 WK15PD ..............T58
4157901 ..... TDS411A09800 WK15PD ..............T58
4157902 ..... TDS411A09900 WK15PD ..............T58
4157903 ..... TDS411A09921 WK15PD ..............T59
4157950 ..... TDG532A03000 WN10HD ............T120
4157951 ..... TDG532A03048 WN10HD ............T120
4157952 ..... TDG532A03100 WN10HD ............T120
4157973 ..... TDG532A03175 WN10HD ............T120
4157974 ..... TDG532A03200 WN10HD ............T120
4157975 ..... TDG532A03264 WN10HD ............T120
4157976 ..... TDG532A03300 WN10HD ............T120
4157977 ..... TDG532A03400 WN10HD ............T120
4157978 ..... TDG532A03455 WN10HD ............T120
4157979 ..... TDG532A03500 WN10HD ............T120
4157980 ..... TDG532A03571 WN10HD ............T120
4157981 ..... TDG532A03600 WN10HD ............T120
4157982 ..... TDG532A03658 WN10HD ............T120
4157983 ..... TDG532A03700 WN10HD ............T120
4157984 ..... TDG532A03734 WN10HD ............T120
4157985 ..... TDG532A03800 WN10HD ............T120
4157986 ..... TDG532A03900 WN10HD ............T120
4157987 ..... TDG532A03970 WN10HD ............T120
4157988 ..... TDG532A04000 WN10HD ............T120
4157989 ..... TDG532A04039 WN10HD ............T120
4157990 ..... TDG532A04090 WN10HD ............T120
4157991 ..... TDG532A04100 WN10HD ............T120
4157992 ..... TDG532A04200 WN10HD ............T120
4157993 ..... TDG532A04217 WN10HD ............T120
4157994 ..... TDG532A04300 WN10HD ............T121
4157995 ..... TDG532A04366 WN10HD ............T121
4157996 ..... TDG532A04400 WN10HD ............T121
4157997 ..... TDG532A04500 WN10HD ............T121
4157998 ..... TDG532A04600 WN10HD ............T121
4157999 ..... TDG532A04623 WN10HD ............T121
4158000 ..... TDG532A04700 WN10HD ............T121
4158001 ..... TDG532A04763 WN10HD ............T121
4158002 ..... TDG532A04800 WN10HD ............T121
4158003 ..... TDG532A04852 WN10HD ............T121
4158004 ..... TDG532A04900 WN10HD ............T121
4158005 ..... TDG532A05000 WN10HD ............T121
4158006 ..... TDG532A05100 WN10HD ............T121
4158007 ..... TDG532A05106 WN10HD ............T121
4158008 ..... TDG532A05159 WN10HD ............T121
4158009 ..... TDG532A05200 WN10HD ............T121
4158010 ..... TDG532A05300 WN10HD ............T121
4158011 ..... TDG532A05400 WN10HD ............T121
4158012 ..... TDG532A05410 WN10HD ............T121
4158013 ..... TDG532A05500 WN10HD ............T121
4158014 ..... TDG532A05558 WN10HD ............T121
4158015 ..... TDG532A05600 WN10HD ............T121
4158016 ..... TDG532A05616 WN10HD ............T121
4158017 ..... TDG532A05700 WN10HD ............T121
4158018 ..... TDG532A05800 WN10HD ............T121
4158019 ..... TDG532A05900 WN10HD ............T121
4158020 ..... TDG532A05954 WN10HD ............T121
4158021 ..... TDG532A06000 WN10HD ............T121
4158022 ..... TDG532A06100 WN10HD ............T121
4158023 ..... TDG532A06200 WN10HD ............T121
4158024 ..... TDG532A06300 WN10HD ............T121
4158025 ..... TDG532A06350 WN10HD ............T121
4158026 ..... TDG532A06400 WN10HD ............T121
4158027 ..... TDG532A06500 WN10HD ............T121
4158028 ..... TDG532A06528 WN10HD ............T121
4158029 ..... TDG532A06600 WN10HD ............T121
4158030 ..... TDG532A06630 WN10HD ............T121
4158031 ..... TDG532A06700 WN10HD ............T121
4158032 ..... TDG532A06746 WN10HD ............T121
4158033 ..... TDG532A06800 WN10HD ............T121
4158034 ..... TDG532A06900 WN10HD ............T122
4158035 ..... TDG532A07000 WN10HD ............T122
4158036 ..... TDG532A07100 WN10HD ............T122
4158037 ..... TDG532A07145 WN10HD ............T122
4158038 ..... TDG532A07200 WN10HD ............T122
4158039 ..... TDG532A07300 WN10HD ............T122
4158040 ..... TDG532A07400 WN10HD ............T122
4158041 ..... TDG532A07500 WN10HD ............T122
4158042 ..... TDG532A07541 WN10HD ............T122
4158043 ..... TDG532A07600 WN10HD ............T122
4158044 ..... TDG532A07700 WN10HD ............T122
4158045 ..... TDG532A07800 WN10HD ............T122
4158046 ..... TDG532A07900 WN10HD ............T122
4158047 ..... TDG532A07938 WN10HD ............T122
4158048 ..... TDG532A08000 WN10HD ............T122
4158049 ..... TDG532A08100 WN10HD ............T122
4158050 ..... TDG532A08200 WN10HD ............T122
4158051 ..... TDG532A08300 WN10HD ............T122
4158052 ..... TDG532A08334 WN10HD ............T122
4158053 ..... TDG532A08400 WN10HD ............T122
4158054 ..... TDG532A08433 WN10HD ............T122
4158055 ..... TDG532A08500 WN10HD ............T122
4158056 ..... TDG532A08600 WN10HD ............T122
4158057 ..... TDG532A08700 WN10HD ............T122
4158058 ..... TDG532A08733 WN10HD ............T122
4158059 ..... TDG532A08800 WN10HD ............T122
4158060 ..... TDG532A08900 WN10HD ............T122
4158061 ..... TDG532A09000 WN10HD ............T122
4158062 ..... TDG532A09100 WN10HD ............T122
4158063 ..... TDG532A09129 WN10HD ............T122
4158064 ..... TDG532A09200 WN10HD ............T122
4158065 ..... TDG532A09300 WN10HD ............T122
4158066 ..... TDG532A09347 WN10HD ............T122
4158067 ..... TDG532A09400 WN10HD ............T122
4158068 ..... TDG532A09500 WN10HD ............T122
4158069 ..... TDG532A09525 WN10HD ............T122
4158070 ..... TDG532A09600 WN10HD ............T122
4158071 ..... TDG532A09700 WN10HD ............T122
4158072 ..... TDG532A09800 WN10HD ............T122
4158073 ..... TDG532A09900 WN10HD ............T122
4158074 ..... TDG532A09921 WN10HD ............T123
4158081 ..... TDG532A10000 WN10HD ............T123
4158082 ..... TDG532A10100 WN10HD ............T123
4158323 ..... GX105001 WH16PG ......................Y46
4158324 ..... GX105002 WH16PG ......................Y46
Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 46 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRANDO b 28 20153 09PM
Z47
widia.com
Index by Order Number
Order No. Catalogue No. Page(s)
4158325 ..... GX105003 WH16PG ......................Y46
4158326 ..... GX105004 WH16PG ......................Y46
4158327 ..... GX105005 WH16PG ......................Y46
4158328 ..... GX105006 WH16PG ......................Y46
4158329 ..... GX105007 WH16PG ......................Y46
4158330 ..... GX105008 WH16PG ......................Y46
4158331 ..... GX105009 WH16PG ......................Y46
4158332 ..... GX105010 WH16PG ......................Y46
4158333 ..... GX105011 WH16PG ......................Y46
4158334 ..... GX105012 WH16PG ......................Y46
4158335 ..... GX105013 WH16PG ......................Y46
4158353 ..... TDG532A10200 WN10HD ............T123
4158354 ..... TDG532A10300 WN10HD ............T123
4158355 ..... TDG532A10320 WN10HD ............T123
4158356 ..... TDG532A10400 WN10HD ............T123
4158357 ..... TDG532A10500 WN10HD ............T123
4158358 ..... TDG532A10600 WN10HD ............T123
4158359 ..... TDG532A10700 WN10HD ............T123
4158360 ..... TDG532A10716 WN10HD ............T123
4158361 ..... TDG532A10800 WN10HD ............T123
4158362 ..... TDG532A10900 WN10HD ............T123
4158363 ..... TDG532A11000 WN10HD ............T123
4158364 ..... TDG532A11100 WN10HD ............T123
4158365 ..... TDG532A11113 WN10HD ............T123
4158366 ..... TDG532A11200 WN10HD ............T123
4158367 ..... TDG532A11300 WN10HD ............T123
4158368 ..... TDG532A11400 WN10HD ............T123
4158369 ..... TDG532A11500 WN10HD ............T123
4158370 ..... TDG532A11509 WN10HD ............T123
4158371 ..... TDG532A11600 WN10HD ............T123
4158372 ..... TDG532A11700 WN10HD ............T123
4158373 ..... TDG532A11800 WN10HD ............T123
4158374 ..... TDG532A11900 WN10HD ............T123
4158375 ..... TDG532A11908 WN10HD ............T123
4158376 ..... TDG532A12000 WN10HD ............T123
4158377 ..... TDG532A12100 WN10HD ............T123
4158378 ..... TDG532A12200 WN10HD ............T123
4158379 ..... TDG532A12300 WN10HD ............T123
4158380 ..... TDG532A12304 WN10HD ............T123
4158381 ..... TDG532A12400 WN10HD ............T123
4158382 ..... TDG532A12500 WN10HD ............T123
4158383 ..... TDG532A12600 WN10HD ............T123
4158384 ..... TDG532A12700 WN10HD ............T123
4158385 ..... TDG532A12800 WN10HD ............T123
4158386 ..... TDG532A12900 WN10HD ............T123
4158387 ..... TDG532A13000 WN10HD ............T123
4158388 ..... TDG532A13096 WN10HD ............T123
4158389 ..... TDG532A13100 WN10HD ............T123
4158390 ..... TDG532A13200 WN10HD ............T124
4158391 ..... TDG532A13300 WN10HD ............T124
4158392 ..... TDG532A13400 WN10HD ............T124
4158393 ..... TDG532A13500 WN10HD ............T124
4158394 ..... TDG532A13600 WN10HD ............T124
4158395 ..... TDG532A13700 WN10HD ............T124
4158396 ..... TDG532A13800 WN10HD ............T124
4158397 ..... TDG532A13891 WN10HD ............T124
4158398 ..... TDG532A13900 WN10HD ............T124
4158399 ..... TDG532A14000 WN10HD ............T124
4158400 ..... TDG532A14100 WN10HD ............T124
4158401 ..... TDG532A14200 WN10HD ............T124
4158402 ..... TDG532A14288 WN10HD ............T124
4158403 ..... TDG532A14300 WN10HD ............T124
4158404 ..... TDG532A14400 WN10HD ............T124
4158405 ..... TDG532A14500 WN10HD ............T124
4158406 ..... TDG532A14600 WN10HD ............T124
4158407 ..... TDG532A14684 WN10HD ............T124
4158408 ..... TDG532A14700 WN10HD ............T124
4158409 ..... TDG532A14800 WN10HD ............T124
4158410 ..... TDG532A14900 WN10HD ............T124
4158411 ..... TDG532A15000 WN10HD ............T124
4158412 ..... TDG532A15083 WN10HD ............T124
4158413 ..... TDG532A15100 WN10HD ............T124
4158414 ..... TDG532A15200 WN10HD ............T124
4158415 ..... TDG532A15300 WN10HD ............T124
4158416 ..... TDG532A15400 WN10HD ............T124
4158417 ..... TDG532A15479 WN10HD ............T124
4158418 ..... TDG532A15500 WN10HD ............T124
4158419 ..... TDG532A15600 WN10HD ............T124
4158420 ..... TDG532A15700 WN10HD ............T124
4158421 ..... TDG532A15800 WN10HD ............T124
4158422 ..... TDG532A15875 WN10HD ............T124
4158423 ..... TDG532A15900 WN10HD ............T124
4158424 ..... TDG532A16000 WN10HD ............T124
4158425 ..... TDG532A16100 WN10HD ............T124
4158426 ..... TDG532A16200 WN10HD ............T124
4158427 ..... TDG532A16271 WN10HD ............T124
4158428 ..... TDG532A16300 WN10HD ............T124
4158429 ..... TDG532A16400 WN10HD ............T125
4158430 ..... TDG532A16500 WN10HD ............T125
4158431 ..... TDG532A16600 WN10HD ............T125
4158432 ..... TDG532A16670 WN10HD ............T125
4158433 ..... TDG532A16700 WN10HD ............T125
4158434 ..... TDG532A16800 WN10HD ............T125
4158435 ..... TDG532A16900 WN10HD ............T125
4158436 ..... TDG532A17000 WN10HD ............T125
4158437 ..... TDG532A17100 WN10HD ............T125
4158438 ..... TDG532A17200 WN10HD ............T125
4158439 ..... TDG532A17300 WN10HD ............T125
4158440 ..... TDG532A17400 WN10HD ............T125
4158441 ..... TDG532A17463 WN10HD ............T125
4158442 ..... TDG532A17500 WN10HD ............T125
4158443 ..... TDG532A17600 WN10HD ............T125
4158444 ..... TDG532A17700 WN10HD ............T125
4158445 ..... TDG532A17800 WN10HD ............T125
4158446 ..... TDG532A17859 WN10HD ............T125
4158447 ..... TDG532A17900 WN10HD ............T125
4158448 ..... TDG532A13490 WN10HD ............T124
4158471 ..... GT045001 WH36MG ......................Y34
4158472 ..... GT045002 WH36MG ......................Y34
4158475 ..... TDG533A03000 WN10HD ............T127
4158476 ..... TDG533A03048 WN10HD ............T127
4158477 ..... TDG533A03100 WN10HD ............T127
4158478 ..... TDG533A03175 WN10HD ............T127
4158479 ..... TDG533A03200 WN10HD ............T127
4158480 ..... TDG533A03264 WN10HD ............T127
4158481 ..... TDG533A03300 WN10HD ............T127
4158482 ..... TDG533A03400 WN10HD ............T127
4158495 ..... GT225016 WP31MG ......................Y62
4158496 ..... GT225017 WP31MG ......................Y62
4158497 ..... GT225018 WP31MG ......................Y62
4158498 ..... GT225019 WP31MG ......................Y62
4158499 ..... GT225020 WP31MG ......................Y62
4158500 ..... GT225021 WP31MG ......................Y62
4158501 ..... GT225022 WP31MG ......................Y62
4158502 ..... GT225023 WP31MG ......................Y62
4158513 ..... GT225024 WP31MG ......................Y62
4158514 ..... GT225025 WP31MG ......................Y62
4158515 ..... GT225026 WP31MG ......................Y62
4158516 ..... GT225027 WP31MG ......................Y62
4158517 ..... GT225028 WP31MG ......................Y62
4158518 ..... GT225029 WP31MG ......................Y62
4158519 ..... GT225030 WP31MG ......................Y62
4158520 ..... TDG533A10000 WN10HD ............T130
4158521 ..... TDG533A10100 WN10HD ............T130
4158522 ..... TDG533A10200 WN10HD ............T130
4158533 ..... TDG533A10300 WN10HD ............T130
4158534 ..... TDG533A10320 WN10HD ............T130
4158535 ..... TDG533A10400 WN10HD ............T130
4158536 ..... TDG533A10500 WN10HD ............T130
4158537 ..... TDG533A10600 WN10HD ............T130
4158538 ..... TDG533A10700 WN10HD ............T130
4158539 ..... TDG533A10716 WN10HD ............T130
4158540 ..... TDG533A10800 WN10HD ............T130
4158541 ..... TDG533A10900 WN10HD ............T130
4158542 ..... TDG533A11000 WN10HD ............T130
4158543 ..... TDG533A11100 WN10HD ............T130
4158544 ..... TDG533A11113 WN10HD ............T130
4158545 ..... TDG533A11200 WN10HD ............T130
4158546 ..... TDG533A11300 WN10HD ............T130
4158547 ..... TDG533A11400 WN10HD ............T130
4158548 ..... TDG533A11500 WN10HD ............T130
4158549 ..... TDG533A11509 WN10HD ............T130
4158550 ..... TDG533A11600 WN10HD ............T130
4158551 ..... TDG533A11700 WN10HD ............T130
4158552 ..... TDG533A11800 WN10HD ............T130
4158553 ..... TDG533A03455 WN10HD ............T127
4158554 ..... TDG533A03500 WN10HD ............T127
4158555 ..... TDG532A18000 WN10HD ............T125
4158556 ..... TDG533A03571 WN10HD ............T127
4158557 ..... TDG532A18100 WN10HD ............T125
4158558 ..... TDG533A03600 WN10HD ............T127
4158559 ..... TDG532A18200 WN10HD ............T125
4158560 ..... TDG533A03658 WN10HD ............T127
4158561 ..... TDG532A18258 WN10HD ............T125
4158562 ..... TDG533A03700 WN10HD ............T127
4158563 ..... TDG533A11900 WN10HD ............T130
4158564 ..... TDG533A11908 WN10HD ............T130
4158565 ..... TDG533A12000 WN10HD ............T130
4158566 ..... TDG533A12100 WN10HD ............T130
4158567 ..... TDG533A12200 WN10HD ............T130
4158568 ..... TDG533A12300 WN10HD ............T130
4158569 ..... TDG533A12304 WN10HD ............T130
4158570 ..... TDG533A12400 WN10HD ............T130
4158571 ..... TDG533A12500 WN10HD ............T130
4158572 ..... TDG533A12600 WN10HD ............T130
4158573 ..... TDG532A18300 WN10HD ............T125
4158574 ..... TDG533A03734 WN10HD ............T127
4158575 ..... TDG532A18400 WN10HD ............T125
4158576 ..... TDG533A03800 WN10HD ............T127
4158577 ..... TDG532A18500 WN10HD ............T125
4158578 ..... TDG533A03900 WN10HD ............T127
4158579 ..... TDG532A18600 WN10HD ............T125
4158580 ..... TDG533A03970 WN10HD ............T127
4158581 ..... TDG532A18654 WN10HD ............T125
4158582 ..... TDG533A04000 WN10HD ............T127
4158583 ..... TDG533A04039 WN10HD ............T127
4158584 ..... TDG532A18700 WN10HD ............T125
4158585 ..... TDG532A18800 WN10HD ............T125
4158586 ..... TDG533A04090 WN10HD ............T127
4158587 ..... TDG532A18900 WN10HD ............T125
4158588 ..... TDG533A04100 WN10HD ............T127
4158589 ..... TDG532A19000 WN10HD ............T125
4158590 ..... TDG533A04200 WN10HD ............T127
4158591 ..... TDG532A19050 WN10HD ............T125
4158592 ..... TDG533A04217 WN10HD ............T127
4158593 ..... TDG533A12700 WN10HD ............T130
4158594 ..... TDG533A12800 WN10HD ............T130
4158595 ..... TDG533A12900 WN10HD ............T130
4158596 ..... TDG533A13000 WN10HD ............T130
4158597 ..... TDG533A13096 WN10HD ............T130
4158598 ..... TDG533A13100 WN10HD ............T130
4158599 ..... TDG533A13200 WN10HD ............T131
4158600 ..... TDG533A13300 WN10HD ............T131
4158601 ..... TDG533A13400 WN10HD ............T131
4158602 ..... TDG533A13500 WN10HD ............T131
4158603 ..... TDG532A19100 WN10HD ............T125
4158604 ..... TDG533A04300 WN10HD ............T128
4158605 ..... TDG532A19200 WN10HD ............T125
4158606 ..... TDG533A04366 WN10HD ............T128
4158607 ..... TDG532A19300 WN10HD ............T125
4158608 ..... TDG533A04400 WN10HD ............T128
4158609 ..... TDG532A19400 WN10HD ............T125
4158610 ..... TDG533A04500 WN10HD ............T128
4158611 ..... TDG532A19500 WN10HD ............T125
4158612 ..... TDG533A04600 WN10HD ............T128
4158613 ..... TDG532A19600 WN10HD ............T125
4158614 ..... TDG533A04623 WN10HD ............T128
4158615 ..... TDG533A04700 WN10HD ............T128
4158616 ..... TDG532A19700 WN10HD ............T125
4158617 ..... TDG533A04763 WN10HD ............T128
4158618 ..... TDG532A19800 WN10HD ............T126
4158619 ..... TDG533A04800 WN10HD ............T128
4158620 ..... TDG532A19900 WN10HD ............T126
4158621 ..... TDG533A04852 WN10HD ............T128
4158622 ..... TDG532A20000 WN10HD ............T126
4158623 ..... TDG533A13600 WN10HD ............T131
4158624 ..... TDG533A13700 WN10HD ............T131
4158625 ..... TDG533A13800 WN10HD ............T131
4158626 ..... TDG533A13891 WN10HD ............T131
4158627 ..... TDG533A13900 WN10HD ............T131
4158628 ..... TDG533A14000 WN10HD ............T131
4158629 ..... TDG533A14100 WN10HD ............T131
4158630 ..... TDG533A14200 WN10HD ............T131
4158631 ..... TDG533A14288 WN10HD ............T131
4158632 ..... TDG533A14300 WN10HD ............T131
4158633 ..... TDG533A04900 WN10HD ............T128
4158634 ..... TDG532A21000 WN10HD ............T126
4158635 ..... TDG533A05000 WN10HD ............T128
4158636 ..... TDG532A22000 WN10HD ............T126
4158637 ..... TDG532A23000 WN10HD ............T126
4158638 ..... TDG533A05100 WN10HD ............T128
4158639 ..... TDG533A05106 WN10HD ............T128
4158640 ..... TDG533A05159 WN10HD ............T128
4158641 ..... TDG533A05200 WN10HD ............T128
4158642 ..... TDG533A05300 WN10HD ............T128
4158643 ..... TDG533A14400 WN10HD ............T131
4158644 ..... TDG533A14500 WN10HD ............T131
4158645 ..... TDG533A14600 WN10HD ............T131
4158646 ..... TDG533A14684 WN10HD ............T131
4158647 ..... TDG533A14700 WN10HD ............T131
4158648 ..... TDG533A14800 WN10HD ............T131
4158649 ..... TDG533A14900 WN10HD ............T131
4158650 ..... TDG533A15000 WN10HD ............T131
4158651 ..... TDG533A15083 WN10HD ............T131
4158652 ..... TDG533A15100 WN10HD ............T131
4158653 ..... TDG533A05400 WN10HD ............T128
4158654 ..... TDG533A05410 WN10HD ............T128
4158655 ..... TDG533A05500 WN10HD ............T128
4158656 ..... TDG533A05558 WN10HD ............T128
4158657 ..... TDG533A05600 WN10HD ............T128
4158658 ..... TDG533A05616 WN10HD ............T128
4158659 ..... TDG533A05700 WN10HD ............T128
4158660 ..... TDG533A05800 WN10HD ............T128
4158661 ..... TDG533A05900 WN10HD ............T128
Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 47 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRAND O b 28 2015 3 09 PM
Z48 widia.com
Index by Order Number
Order No. Catalogue No. Page(s)
4158662 ..... TDG533A05954 WN10HD ............T128
4158663 ..... TDG533A15200 WN10HD ............T131
4158664 ..... TDG533A15300 WN10HD ............T131
4158665 ..... TDG533A15400 WN10HD ............T131
4158666 ..... TDG533A15479 WN10HD ............T131
4158667 ..... TDG533A15500 WN10HD ............T131
4158668 ..... TDG533A15600 WN10HD ............T131
4158669 ..... TDG533A15700 WN10HD ............T131
4158670 ..... TDG533A15800 WN10HD ............T131
4158671 ..... TDG533A15875 WN10HD ............T131
4158672 ..... TDG533A15900 WN10HD ............T131
4158673 ..... TDG533A06000 WN10HD ............T128
4158674 ..... TDG533A06100 WN10HD ............T128
4158675 ..... TDG533A06200 WN10HD ............T128
4158676 ..... TDG533A06300 WN10HD ............T128
4158677 ..... TDG533A06350 WN10HD ............T128
4158678 ..... TDG533A06400 WN10HD ............T128
4158679 ..... TDG533A06500 WN10HD ............T128
4158680 ..... TDG533A06528 WN10HD ............T128
4158681 ..... TDG533A06600 WN10HD ............T128
4158682 ..... TDG533A06630 WN10HD ............T128
4158683 ..... TDG533A16000 WN10HD ............T131
4158684 ..... TDG533A16100 WN10HD ............T131
4158685 ..... TDG533A16200 WN10HD ............T131
4158686 ..... TDG533A16271 WN10HD ............T131
4158687 ..... TDG533A16300 WN10HD ............T131
4158688 ..... TDG533A16400 WN10HD ............T132
4158689 ..... TDG533A16500 WN10HD ............T132
4158690 ..... TDG533A16600 WN10HD ............T132
4158691 ..... TDG533A16670 WN10HD ............T132
4158692 ..... TDG533A16700 WN10HD ............T132
4158693 ..... TDG533A06700 WN10HD ............T128
4158694 ..... TDG533A06746 WN10HD ............T128
4158695 ..... TDG533A06800 WN10HD ............T128
4158696 ..... TDG533A06900 WN10HD ............T129
4158697 ..... TDG533A07000 WN10HD ............T129
4158698 ..... TDG533A07100 WN10HD ............T129
4158699 ..... TDG533A07145 WN10HD ............T129
4158700 ..... TDG533A07200 WN10HD ............T129
4158701 ..... TDG533A07300 WN10HD ............T129
4158702 ..... TDG533A07400 WN10HD ............T129
4158703 ..... TDG533A16800 WN10HD ............T132
4158704 ..... TDG533A16900 WN10HD ............T132
4158705 ..... TDG533A17000 WN10HD ............T132
4158706 ..... TDG533A17100 WN10HD ............T132
4158707 ..... TDG533A17200 WN10HD ............T132
4158708 ..... TDG533A17300 WN10HD ............T132
4158709 ..... TDG533A17400 WN10HD ............T132
4158710 ..... TDG533A17463 WN10HD ............T132
4158711 ..... TDG533A17500 WN10HD ............T132
4158712 ..... TDG533A17600 WN10HD ............T132
4158713 ..... TDG533A07500 WN10HD ............T129
4158714 ..... TDG533A07541 WN10HD ............T129
4158715 ..... TDG533A07600 WN10HD ............T129
4158716 ..... TDG533A07700 WN10HD ............T129
4158717 ..... TDG533A07800 WN10HD ............T129
4158718 ..... TDG533A07900 WN10HD ............T129
4158719 ..... TDG533A07938 WN10HD ............T129
4158720 ..... TDG533A08000 WN10HD ............T129
4158721 ..... TDG533A08100 WN10HD ............T129
4158722 ..... TDG533A08200 WN10HD ............T129
4158723 ..... TDG533A17700 WN10HD ............T132
4158724 ..... TDG533A17800 WN10HD ............T132
4158725 ..... TDG533A17859 WN10HD ............T132
4158726 ..... TDG533A17900 WN10HD ............T132
4158727 ..... TDG533A13490 WN10HD ............T131
4158733 ..... TDG533A08300 WN10HD ............T129
4158734 ..... TDG533A08334 WN10HD ............T129
4158735 ..... TDG533A08400 WN10HD ............T129
4158736 ..... TDG533A08433 WN10HD ............T129
4158737 ..... TDG533A08500 WN10HD ............T129
4158738 ..... TDG533A08600 WN10HD ............T129
4158739 ..... TDG533A08700 WN10HD ............T129
4158740 ..... TDG533A08733 WN10HD ............T129
4158741 ..... TDG533A08800 WN10HD ............T129
4158742 ..... TDG533A08900 WN10HD ............T129
4158743 ..... TDG533A09000 WN10HD ............T129
4158744 ..... TDG533A09100 WN10HD ............T129
4158745 ..... TDG533A09129 WN10HD ............T129
4158746 ..... TDG533A09200 WN10HD ............T129
4158747 ..... TDG533A09300 WN10HD ............T129
4158748 ..... TDG533A09347 WN10HD ............T129
4158749 ..... TDG533A09400 WN10HD ............T129
4158750 ..... TDG533A09500 WN10HD ............T129
4158751 ..... TDG533A09525 WN10HD ............T129
4158752 ..... TDG533A09600 WN10HD ............T129
4158753 ..... TDG533A09700 WN10HD ............T129
4158754 ..... TDG533A09800 WN10HD ............T129
4158755 ..... TDG533A09900 WN10HD ............T129
4158756 ..... TDG533A09921 WN10HD ............T130
4158757 ..... TDS412A03000 WK15PD ..............T62
4158758 ..... TDS412A03048 WK15PD ..............T62
4158759 ..... TDS412A03100 WK15PD ..............T62
4158760 ..... TDS412A03175 WK15PD ..............T62
4158761 ..... TDS412A03200 WK15PD ..............T62
4158762 ..... TDS412A03264 WK15PD ..............T62
4158763 ..... GT045003 WH36MG ......................Y34
4158764 ..... GT045004 WH36MG ......................Y34
4158765 ..... GT045005 WH36MG ......................Y34
4158766 ..... GT045006 WH36MG ......................Y34
4158767 ..... GT045007 WH36MG ......................Y34
4158768 ..... GT045008 WH36MG ......................Y34
4158769 ..... GT045009 WH36MG ......................Y34
4158770 ..... GT045010 WH36MG ......................Y34
4158771 ..... GT045011 WH36MG ......................Y34
4158772 ..... GT045012 WH36MG ......................Y34
4158773 ..... GT045013 WH36MG ......................Y34
4158774 ..... GT045014 WH36MG ......................Y34
4158775 ..... GT045015 WH36MG ......................Y34
4158776 ..... GT045016 WH36MG ......................Y34
4158777 ..... GT045017 WH36MG ......................Y34
4158778 ..... GT045018 WH36MG ......................Y34
4158793 ..... TDS412A03300 WK15PD ..............T62
4158794 ..... TDS412A03400 WK15PD ..............T62
4158795 ..... TDS412A03455 WK15PD ..............T62
4158796 ..... TDS412A03500 WK15PD ..............T62
4158797 ..... TDS412A03571 WK15PD ..............T62
4158798 ..... TDS412A03600 WK15PD ..............T62
4158799 ..... TDS412A03658 WK15PD ..............T62
4158800 ..... TDS412A03700 WK15PD ..............T62
4158801 ..... TDS412A03734 WK15PD ..............T62
4158802 ..... TDS412A03800 WK15PD ..............T62
4158803 ..... TDS412A03900 WK15PD ..............T62
4158804 ..... TDS412A03970 WK15PD ..............T62
4158805 ..... TDS412A04000 WK15PD ..............T62
4158806 ..... TDS412A04039 WK15PD ..............T62
4158807 ..... TDS412A04090 WK15PD ..............T62
4158808 ..... TDS412A04100 WK15PD ..............T62
4158809 ..... TDS412A04200 WK15PD ..............T62
4158810 ..... TDS412A04217 WK15PD ..............T62
4158811 ..... TDS412A04300 WK15PD ..............T63
4158812 ..... TDS412A04366 WK15PD ..............T63
4158813 ..... TDS412A04400 WK15PD ..............T63
4158814 ..... TDS412A04500 WK15PD ..............T63
4158815 ..... TDS412A04600 WK15PD ..............T63
4158816 ..... TDS412A04623 WK15PD ..............T63
4158817 ..... TDS412A04700 WK15PD ..............T63
4158818 ..... TDS412A04763 WK15PD ..............T63
4158819 ..... TDS412A04800 WK15PD ..............T63
4158820 ..... TDS412A04852 WK15PD ..............T63
4158821 ..... TDS412A04900 WK15PD ..............T63
4158822 ..... TDS412A05000 WK15PD ..............T63
4158823 ..... TDS412A05100 WK15PD ..............T63
4158824 ..... TDS412A05106 WK15PD ..............T63
4158825 ..... TDS412A05159 WK15PD ..............T63
4158826 ..... TDS412A05200 WK15PD ..............T63
4158827 ..... TDS412A05300 WK15PD ..............T63
4158828 ..... TDS412A05400 WK15PD ..............T63
4158829 ..... TDS412A05410 WK15PD ..............T63
4158830 ..... TDS412A05500 WK15PD ..............T63
4158831 ..... TDS412A05558 WK15PD ..............T63
4158832 ..... TDS412A05600 WK15PD ..............T63
4158833 ..... TDS412A05616 WK15PD ..............T63
4158834 ..... TDS412A05700 WK15PD ..............T63
4158835 ..... TDS412A05800 WK15PD ..............T63
4158836 ..... TDS412A05900 WK15PD ..............T63
4158837 ..... TDS412A05954 WK15PD ..............T63
4158838 ..... TDS412A06000 WK15PD ..............T63
4158839 ..... TDS412A06100 WK15PD ..............T63
4158840 ..... TDS412A06200 WK15PD ..............T63
4158841 ..... TDS412A06300 WK15PD ..............T63
4158842 ..... TDS412A06350 WK15PD ..............T63
4158843 ..... TDS412A06400 WK15PD ..............T63
4158844 ..... TDS412A06500 WK15PD ..............T63
4158845 ..... TDS412A06528 WK15PD ..............T63
4158846 ..... TDS412A06600 WK15PD ..............T63
4158847 ..... TDS412A06630 WK15PD ..............T63
4158848 ..... TDS412A06700 WK15PD ..............T63
4158849 ..... TDS412A06746 WK15PD ..............T63
4158850 ..... TDS412A06800 WK15PD ..............T63
4158851 ..... TDS412A06900 WK15PD ..............T64
4158852 ..... TDS412A07000 WK15PD ..............T64
4158853 ..... TDS412A07100 WK15PD ..............T64
4158854 ..... TDS412A07145 WK15PD ..............T64
4158855 ..... TDS412A07200 WK15PD ..............T64
4158856 ..... TDS412A07300 WK15PD ..............T64
4158857 ..... TDS412A07400 WK15PD ..............T64
4158858 ..... TDS412A07500 WK15PD ..............T64
4158859 ..... TDS412A07541 WK15PD ..............T64
4158860 ..... TDS412A07600 WK15PD ..............T64
4158861 ..... TDS412A07700 WK15PD ..............T64
4158862 ..... TDS412A07800 WK15PD ..............T64
4158863 ..... TDS412A07900 WK15PD ..............T64
4158864 ..... TDS412A07938 WK15PD ..............T64
4158865 ..... TDS412A08000 WK15PD ..............T64
4158866 ..... TDS412A08100 WK15PD ..............T64
4158867 ..... TDS412A08200 WK15PD ..............T64
4158868 ..... TDS412A08300 WK15PD ..............T64
4158869 ..... TDS412A08334 WK15PD ..............T64
4158870 ..... TDS412A08400 WK15PD ..............T64
4158871 ..... TDS412A08433 WK15PD ..............T64
4158872 ..... TDS412A08500 WK15PD ..............T64
4158873 ..... TDS412A08600 WK15PD ..............T64
4158874 ..... TDS412A08700 WK15PD ..............T64
4158875 ..... TDS412A08733 WK15PD ..............T64
4158876 ..... TDS412A08800 WK15PD ..............T64
4158877 ..... TDS412A08900 WK15PD ..............T64
4158878 ..... TDS412A09000 WK15PD ..............T64
4158879 ..... TDS412A09100 WK15PD ..............T64
4158880 ..... TDS412A09129 WK15PD ..............T64
4158881 ..... TDS412A09200 WK15PD ..............T64
4158882 ..... TDS412A09300 WK15PD ..............T64
4158883 ..... TDS412A09347 WK15PD ..............T64
4158884 ..... TDS412A09400 WK15PD ..............T64
4158885 ..... TDS412A09500 WK15PD ..............T64
4158886 ..... TDS412A09525 WK15PD ..............T64
4158887 ..... TDS412A09600 WK15PD ..............T64
4158888 ..... TDS412A09700 WK15PD ..............T64
4158889 ..... TDS412A09800 WK15PD ..............T64
4158890 ..... TDS412A09900 WK15PD ..............T64
4158891 ..... TDS412A09921 WK15PD ..............T65
4159017 ..... M4000CA-HN07HF ....................... H73
4159018 ..... M4000CA-HN07HD ....................... H73
4159019 ..... M4000CA-HN09HD ....................... H73
4159020 ..... M4000CA-AP1003 ....................... H73
4159021 ..... M4000CA-AP1604 ....................... H73
4159022 ..... M4000CA-AD1505 ....................... H73
4159522 ..... GT235001 WN38MG ......................Y63
4159636 ..... GT125001 WS32MG ......................Y30
4159637 ..... GT125002 WS32MG ......................Y30
4159638 ..... GT125003 WS32MG ......................Y30
4159639 ..... GT125004 WS32MG ......................Y30
4159640 ..... GT125005 WS32MG ......................Y30
4159641 ..... GT125006 WS32MG ......................Y30
4159642 ..... GT125007 WS32MG ......................Y30
4159644 ..... GT235002 WN38MG ......................Y63
4159645 ..... GT235003 WN38MG ......................Y63
4159646 ..... GT235004 WN38MG ......................Y63
4159647 ..... GT235005 WN38MG ......................Y63
4159648 ..... GT235006 WN38MG ......................Y63
4159649 ..... GT235007 WN38MG ......................Y63
4159650 ..... GT235008 WN38MG ......................Y63
4159651 ..... GT235009 WN38MG ......................Y63
4159652 ..... GT235010 WN38MG ......................Y63
4159653 ..... GT235011 WN38MG ......................Y63
4159663 ..... GT125008 WS32MG ......................Y30
4159664 ..... GT125009 WS32MG ......................Y30
4159665 ..... GT125010 WS32MG ......................Y30
4159913 ..... GT065001 WS32MG ......................Y56
4159914 ..... GT065002 WS32MG ......................Y56
4159915 ..... GT065003 WS32MG ......................Y56
4159916 ..... GT065004 WS32MG ......................Y56
4159917 ..... GT065005 WS32MG ......................Y56
4159918 ..... GT065006 WS32MG ......................Y56
4159919 ..... GT065007 WS32MG ......................Y56
4159920 ..... GT065008 WS32MG ......................Y56
4159921 ..... GT065009 WS32MG ......................Y56
4159922 ..... GT065010 WS32MG ......................Y56
4159965 ..... GT235012 WP31MG ......................Y63
4159966 ..... GT235013 WP31MG ......................Y63
4159967 ..... GT235014 WP31MG ......................Y63
4159968 ..... GT235015 WP31MG ......................Y63
4159969 ..... GT235016 WP31MG ......................Y63
4159970 ..... GT235017 WP31MG ......................Y63
4159971 ..... GT235018 WP31MG ......................Y63
4159972 ..... GT235019 WP31MG ......................Y63
4159993 ..... GT235020 WP31MG ......................Y63
4159994 ..... GT235021 WP31MG ......................Y63
4159995 ..... GT235022 WP31MG ......................Y63
4160036 ..... GT705001 WN48EG .........................Y9
4160037 ..... GT705002 WN48EG .........................Y9
4160038 ..... GT705003 WN48EG .........................Y9
4160039 ..... GT705004 WN48EG .........................Y9
4160040 ..... GT705005 WN48EG .........................Y9
Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 48 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRANDO b 28 20153 09PM
Z49
widia.com
Index by Order Number
Order No. Catalogue No. Page(s)
4160041 ..... GT705006 WN48EG .........................Y9
4160042 ..... GT705007 WN48EG .........................Y9
4160054 ..... GT805001 WN48EG .......................Y32
4160055 ..... GT805002 WN48EG .......................Y32
4160056 ..... GT805003 WN48EG .......................Y32
4160057 ..... GT805004 WN48EG .......................Y32
4160058 ..... GT805005 WN48EG .......................Y32
4160059 ..... GT805006 WN48EG .......................Y32
4160060 ..... GT805007 WN48EG .......................Y32
4160061 ..... GT805008 WN48EG .......................Y32
4160062 ..... GT805009 WN48EG .......................Y32
4160063 ..... GT705008 WN48EG .........................Y9
4160093 ..... GT145001 WN35MG ........................Y8
4160094 ..... GT145002 WN35MG ........................Y8
4160095 ..... GT145003 WN35MG ........................Y8
4160096 ..... GT145004 WN35MG ........................Y8
4160097 ..... GT145005 WN35MG ........................Y8
4160098 ..... GT145006 WN35MG ........................Y8
4160099 ..... GT145007 WN35MG ........................Y8
4160100 ..... GT105001 WS32MG ........................Y7
4160101 ..... GT105002 WS32MG ........................Y7
4160102 ..... GT105003 WS32MG ........................Y7
4160103 ..... GT105004 WS32MG ........................Y7
4160104 ..... GT105005 WS32MG ........................Y7
4160105 ..... GT105006 WS32MG ........................Y7
4160106 ..... GT105007 WS32MG ........................Y7
4160107 ..... GT105008 WS32MG ........................Y7
4160108 ..... GT105009 WS32MG ........................Y7
4160109 ..... GT105010 WS32MG ........................Y7
4160437 ..... GT165001 WN35MG ......................Y31
4160438 ..... GT165002 WN35MG ......................Y31
4160439 ..... GT165003 WN35MG ......................Y31
4160440 ..... GT165004 WN35MG ......................Y31
4160441 ..... GT165005 WN35MG ......................Y31
4160442 ..... GT165006 WN35MG ......................Y31
4160464 ..... TDS212A18100 WK15PD ..............T55
4160465 ..... TDS212A18200 WK15PD ..............T55
4160466 ..... TDS212A18258 WK15PD ..............T55
4160467 ..... TDS212A18300 WK15PD ..............T55
4160468 ..... TDS212A18400 WK15PD ..............T55
4160469 ..... TDS212A18500 WK15PD ..............T55
4160470 ..... TDS212A18600 WK15PD ..............T55
4160471 ..... TDS212A18654 WK15PD ..............T55
4160472 ..... TDS212A18700 WK15PD ..............T55
4160523 ..... GT165007 WN35MG ......................Y31
4160528 ..... TDS212A18000 WK15PD ..............T55
4160583 ..... TDS212A18800 WK15PD ..............T55
4160584 ..... TDS212A18900 WK15PD ..............T55
4160585 ..... TDS212A19000 WK15PD ..............T55
4160586 ..... TDS212A19050 WK15PD ..............T55
4160587 ..... TDS212A19100 WK15PD ..............T55
4160588 ..... TDS212A19200 WK15PD ..............T55
4160589 ..... TDS212A19300 WK15PD ..............T55
4160590 ..... TDS212A19400 WK15PD ..............T55
4160591 ..... TDS212A19500 WK15PD ..............T55
4160592 ..... TDS212A19600 WK15PD ..............T55
4160593 ..... TDS212A19700 WK15PD ..............T55
4160594 ..... TDS212A19800 WK15PD ..............T55
4160595 ..... TDS212A19900 WK15PD ..............T55
4160596 ..... TDS212A20000 WK15PD ..............T55
4162258 ..... TDS202A03000 WP20PD ..............T50
4162259 ..... TDS202A03048 WP20PD ..............T50
4162260 ..... TDS202A03100 WP20PD ..............T50
4162261 ..... TDS202A03175 WP20PD ..............T50
4162262 ..... TDS202A03200 WP20PD ..............T50
4162274 ..... TDS402A18000 WP20PD ..............T67
4162275 ..... TDS402A18100 WP20PD ..............T67
4162276 ..... TDS402A18200 WP20PD ..............T67
4162277 ..... TDS402A18258 WP20PD ..............T67
4162278 ..... TDS402A18300 WP20PD ..............T67
4162279 ..... TDS402A18400 WP20PD ..............T67
4162280 ..... TDS402A18500 WP20PD ..............T67
4162281 ..... TDS402A18600 WP20PD ..............T67
4162282 ..... TDS402A18654 WP20PD ..............T67
4162283 ..... TDS202A03264 WP20PD ..............T50
4162284 ..... TDS202A03300 WP20PD ..............T50
4162285 ..... TDS202A03400 WP20PD ..............T50
4162286 ..... TDS202A03455 WP20PD ..............T50
4162287 ..... TDS202A03500 WP20PD ..............T50
4162288 ..... TDS202A03571 WP20PD ..............T50
4162289 ..... TDS202A03600 WP20PD ..............T50
4162290 ..... TDS202A03658 WP20PD ..............T50
4162291 ..... TDS202A03700 WP20PD ..............T50
4162292 ..... TDS202A03734 WP20PD ..............T50
4162293 ..... TDS202A03800 WP20PD ..............T50
4162294 ..... TDS202A03900 WP20PD ..............T50
4162295 ..... TDS202A03970 WP20PD ..............T50
4162296 ..... TDS202A04000 WP20PD ..............T50
4162297 ..... TDS202A04039 WP20PD ..............T50
4162298 ..... TDS202A04090 WP20PD ..............T50
4162299 ..... TDS202A04100 WP20PD ..............T50
4162300 ..... TDS202A04200 WP20PD ..............T50
4162301 ..... TDS202A04217 WP20PD ..............T50
4162302 ..... TDS202A04300 WP20PD ..............T51
4162303 ..... TDS202A04366 WP20PD ..............T51
4162304 ..... TDS202A04400 WP20PD ..............T51
4162305 ..... TDS202A04500 WP20PD ..............T51
4162306 ..... TDS202A04600 WP20PD ..............T51
4162307 ..... TDS202A04623 WP20PD ..............T51
4162308 ..... TDS202A04700 WP20PD ..............T51
4162309 ..... TDS202A04763 WP20PD ..............T51
4162310 ..... TDS202A04800 WP20PD ..............T51
4162311 ..... TDS202A04852 WP20PD ..............T51
4162312 ..... TDS202A04900 WP20PD ..............T51
4162313 ..... TDS202A05000 WP20PD ..............T51
4162314 ..... TDS202A05100 WP20PD ..............T51
4162315 ..... TDS202A05106 WP20PD ..............T51
4162316 ..... TDS202A05159 WP20PD ..............T51
4162317 ..... TDS202A05200 WP20PD ..............T51
4162318 ..... TDS202A05300 WP20PD ..............T51
4162319 ..... TDS202A05400 WP20PD ..............T51
4162320 ..... TDS202A05410 WP20PD ..............T51
4162321 ..... TDS202A05500 WP20PD ..............T51
4162322 ..... TDS202A05558 WP20PD ..............T51
4162323 ..... TDS202A05600 WP20PD ..............T51
4162324 ..... TDS202A05616 WP20PD ..............T51
4162325 ..... TDS202A05700 WP20PD ..............T51
4162326 ..... TDS202A05800 WP20PD ..............T51
4162327 ..... TDS202A05900 WP20PD ..............T51
4162328 ..... TDS202A05954 WP20PD ..............T51
4162329 ..... TDS202A06000 WP20PD ..............T51
4162330 ..... TDS202A06100 WP20PD ..............T51
4162331 ..... TDS202A06200 WP20PD ..............T51
4162332 ..... TDS202A06300 WP20PD ..............T51
4162333 ..... TDS202A06350 WP20PD ..............T51
4162334 ..... TDS202A06400 WP20PD ..............T51
4162335 ..... TDS202A06500 WP20PD ..............T51
4162336 ..... TDS202A06528 WP20PD ..............T51
4162337 ..... TDS202A06600 WP20PD ..............T51
4162338 ..... TDS202A06630 WP20PD ..............T51
4162339 ..... TDS202A06700 WP20PD ..............T51
4162340 ..... TDS202A06746 WP20PD ..............T51
4162341 ..... TDS202A06900 WP20PD ..............T52
4162342 ..... TDS202A07000 WP20PD ..............T52
4162343 ..... TDS202A07100 WP20PD ..............T52
4162344 ..... TDS202A07145 WP20PD ..............T52
4162345 ..... TDS202A07200 WP20PD ..............T52
4162346 ..... TDS202A07300 WP20PD ..............T52
4162347 ..... TDS202A07400 WP20PD ..............T52
4162348 ..... TDS202A07500 WP20PD ..............T52
4162349 ..... TDS202A07541 WP20PD ..............T52
4162350 ..... TDS202A07600 WP20PD ..............T52
4162351 ..... TDS202A07700 WP20PD ..............T52
4162352 ..... TDS202A07800 WP20PD ..............T52
4162353 ..... TDS202A07900 WP20PD ..............T52
4162354 ..... TDS202A07938 WP20PD ..............T52
4162355 ..... TDS202A08000 WP20PD ..............T52
4162356 ..... TDS202A08100 WP20PD ..............T52
4162357 ..... TDS202A08200 WP20PD ..............T52
4162358 ..... TDS202A08300 WP20PD ..............T52
4162359 ..... TDS202A08334 WP20PD ..............T52
4162360 ..... TDS202A08400 WP20PD ..............T52
4162361 ..... TDS202A08433 WP20PD ..............T52
4162362 ..... TDS202A08500 WP20PD ..............T52
4162363 ..... TDS202A08600 WP20PD ..............T52
4162364 ..... TDS202A08700 WP20PD ..............T52
4162365 ..... TDS202A08733 WP20PD ..............T52
4162366 ..... TDS202A08800 WP20PD ..............T52
4162367 ..... TDS202A08900 WP20PD ..............T52
4162368 ..... TDS202A09000 WP20PD ..............T52
4162369 ..... TDS202A09100 WP20PD ..............T52
4162370 ..... TDS202A09129 WP20PD ..............T52
4162371 ..... TDS202A09200 WP20PD ..............T52
4162372 ..... TDS202A09300 WP20PD ..............T52
4162373 ..... TDS202A09347 WP20PD ..............T52
4162374 ..... TDS202A09400 WP20PD ..............T52
4162375 ..... TDS202A09500 WP20PD ..............T52
4162376 ..... TDS202A09525 WP20PD ..............T52
4162377 ..... TDS202A09600 WP20PD ..............T52
4162378 ..... TDS202A09700 WP20PD ..............T52
4162379 ..... TDS202A09800 WP20PD ..............T52
4162380 ..... TDS202A09900 WP20PD ..............T52
4162381 ..... TDS202A09921 WP20PD ..............T53
4162382 ..... TDS403A10200 WP20PD ..............T70
4162393 ..... TDS402A18700 WP20PD ..............T67
4162394 ..... TDS402A18800 WP20PD ..............T67
4162395 ..... TDS402A18900 WP20PD ..............T67
4162396 ..... TDS402A19000 WP20PD ..............T67
4162397 ..... TDS402A19050 WP20PD ..............T67
4162398 ..... TDS402A19100 WP20PD ..............T67
4162399 ..... TDS402A19200 WP20PD ..............T67
4162400 ..... TDS402A19300 WP20PD ..............T67
4162401 ..... TDS402A19400 WP20PD ..............T67
4162402 ..... TDS402A19500 WP20PD ..............T67
4162403 ..... TDS402A19600 WP20PD ..............T67
4162404 ..... TDS402A19700 WP20PD ..............T67
4162405 ..... TDS402A19800 WP20PD ..............T67
4162406 ..... TDS402A19900 WP20PD ..............T67
4162407 ..... TDS402A20000 WP20PD ..............T67
4162408 ..... TDS212A10000 WK15PD ..............T53
4162409 ..... TDS212A10100 WK15PD ..............T53
4162410 ..... TDS212A10200 WK15PD ..............T53
4162411 ..... TDS212A10300 WK15PD ..............T53
4162412 ..... TDS212A10320 WK15PD ..............T53
4162417 ..... TDS212A03000 WK15PD ..............T50
4162418 ..... TDS212A03048 WK15PD ..............T50
4162419 ..... TDS212A03100 WK15PD ..............T50
4162420 ..... TDS212A03175 WK15PD ..............T50
4162421 ..... TDS212A03200 WK15PD ..............T50
4162422 ..... TDS212A03264 WK15PD ..............T50
4162423 ..... TDS212A10400 WK15PD ..............T53
4162424 ..... TDS212A10500 WK15PD ..............T53
4162425 ..... TDS212A10600 WK15PD ..............T53
4162426 ..... TDS212A10700 WK15PD ..............T53
4162427 ..... TDS212A10716 WK15PD ..............T53
4162428 ..... TDS212A10800 WK15PD ..............T53
4162429 ..... TDS212A10900 WK15PD ..............T53
4162430 ..... TDS212A11000 WK15PD ..............T53
4162431 ..... TDS212A11100 WK15PD ..............T53
4162432 ..... TDS212A11113 WK15PD ..............T53
4162433 ..... TDS212A11200 WK15PD ..............T53
4162434 ..... TDS212A11300 WK15PD ..............T53
4162435 ..... TDS212A11400 WK15PD ..............T53
4162436 ..... TDS212A11500 WK15PD ..............T53
4162437 ..... TDS212A11509 WK15PD ..............T53
4162438 ..... TDS212A11600 WK15PD ..............T53
4162439 ..... TDS212A11700 WK15PD ..............T53
4162440 ..... TDS212A11800 WK15PD ..............T53
4162441 ..... TDS212A11900 WK15PD ..............T53
4162442 ..... TDS212A11908 WK15PD ..............T53
4162443 ..... TDS212A12000 WK15PD ..............T53
4162444 ..... TDS212A12100 WK15PD ..............T53
4162445 ..... TDS212A12200 WK15PD ..............T53
4162446 ..... TDS212A12300 WK15PD ..............T53
4162447 ..... TDS212A12304 WK15PD ..............T53
4162448 ..... TDS212A12400 WK15PD ..............T53
4162449 ..... TDS212A12500 WK15PD ..............T53
4162450 ..... TDS212A12600 WK15PD ..............T53
4162451 ..... TDS212A12700 WK15PD ..............T53
4162452 ..... TDS212A12800 WK15PD ..............T53
4162453 ..... TDS212A12900 WK15PD ..............T53
4162454 ..... TDS212A13000 WK15PD ..............T53
4162455 ..... TDS212A13096 WK15PD ..............T53
4162456 ..... TDS212A13100 WK15PD ..............T53
4162457 ..... TDS212A13200 WK15PD ..............T54
4162458 ..... TDS212A13300 WK15PD ..............T54
4162459 ..... TDS212A13400 WK15PD ..............T54
4162460 ..... TDS212A13500 WK15PD ..............T54
4162461 ..... TDS212A13600 WK15PD ..............T54
4162462 ..... TDS212A13700 WK15PD ..............T54
4162463 ..... TDS212A13800 WK15PD ..............T54
4162464 ..... TDS212A13891 WK15PD ..............T54
4162465 ..... TDS212A13900 WK15PD ..............T54
4162466 ..... TDS212A14000 WK15PD ..............T54
4162467 ..... TDS212A14100 WK15PD ..............T54
4162468 ..... TDS212A14200 WK15PD ..............T54
4162469 ..... TDS212A14288 WK15PD ..............T54
4162470 ..... TDS212A14300 WK15PD ..............T54
4162471 ..... TDS212A14400 WK15PD ..............T54
4162472 ..... TDS212A14500 WK15PD ..............T54
4162473 ..... TDS212A14600 WK15PD ..............T54
4162474 ..... TDS212A14684 WK15PD ..............T54
4162475 ..... TDS212A14700 WK15PD ..............T54
4162476 ..... TDS212A14800 WK15PD ..............T54
4162477 ..... TDS212A14900 WK15PD ..............T54
4162478 ..... TDS212A15000 WK15PD ..............T54
4162479 ..... TDS212A15083 WK15PD ..............T54
4162480 ..... TDS212A15100 WK15PD ..............T54
4162481 ..... TDS212A15200 WK15PD ..............T54
4162482 ..... TDS212A15300 WK15PD ..............T54
4162483 ..... TDS212A15400 WK15PD ..............T54
4162484 ..... TDS212A15479 WK15PD ..............T54
4162485 ..... TDS212A15500 WK15PD ..............T54
4162486 ..... TDS212A15600 WK15PD ..............T54
Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 49 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRAND O b 28 2015 3 09 PM
Z50 widia.com
Index by Order Number
Order No. Catalogue No. Page(s)
4162487 ..... TDS212A15700 WK15PD ..............T54
4162488 ..... TDS212A15800 WK15PD ..............T54
4162489 ..... TDS212A15875 WK15PD ..............T54
4162490 ..... TDS212A15900 WK15PD ..............T54
4162491 ..... TDS212A16000 WK15PD ..............T54
4162492 ..... TDS212A16100 WK15PD ..............T54
4162493 ..... TDS212A16200 WK15PD ..............T54
4162494 ..... TDS212A16271 WK15PD ..............T54
4162495 ..... TDS212A16300 WK15PD ..............T54
4162496 ..... TDS212A16400 WK15PD ..............T54
4162497 ..... TDS212A16500 WK15PD ..............T55
4162498 ..... TDS212A16600 WK15PD ..............T55
4162499 ..... TDS212A16670 WK15PD ..............T55
4162500 ..... TDS212A16700 WK15PD ..............T55
4162501 ..... TDS212A16800 WK15PD ..............T55
4162502 ..... TDS212A16900 WK15PD ..............T55
4162503 ..... TDS212A17000 WK15PD ..............T55
4162504 ..... TDS212A17100 WK15PD ..............T55
4162505 ..... TDS212A17200 WK15PD ..............T55
4162506 ..... TDS212A17300 WK15PD ..............T55
4162507 ..... TDS212A17400 WK15PD ..............T55
4162508 ..... TDS212A17463 WK15PD ..............T55
4162509 ..... TDS212A17500 WK15PD ..............T55
4162510 ..... TDS212A17600 WK15PD ..............T55
4162511 ..... TDS212A17700 WK15PD ..............T55
4162512 ..... TDS212A17800 WK15PD ..............T55
4162513 ..... TDS212A17859 WK15PD ..............T55
4162514 ..... TDS212A17900 WK15PD ..............T55
4162515 ..... TDS403A18000 WP20PD ..............T73
4162516 ..... TDS403A18100 WP20PD ..............T73
4162517 ..... TDS403A18200 WP20PD ..............T73
4162518 ..... TDS403A18258 WP20PD ..............T73
4162519 ..... TDS403A18300 WP20PD ..............T73
4162520 ..... TDS403A18400 WP20PD ..............T73
4162521 ..... TDS403A18500 WP20PD ..............T73
4162522 ..... TDS403A18600 WP20PD ..............T73
4162543 ..... TDS212A03300 WK15PD ..............T50
4162544 ..... TDS212A03400 WK15PD ..............T50
4162545 ..... TDS212A03455 WK15PD ..............T50
4162546 ..... TDS212A03500 WK15PD ..............T50
4162547 ..... TDS212A03571 WK15PD ..............T50
4162548 ..... TDS212A03600 WK15PD ..............T50
4162549 ..... TDS212A03658 WK15PD ..............T50
4162550 ..... TDS212A03700 WK15PD ..............T50
4162551 ..... TDS212A03734 WK15PD ..............T50
4162552 ..... TDS212A03800 WK15PD ..............T50
4162553 ..... TDS212A03900 WK15PD ..............T50
4162554 ..... TDS212A03970 WK15PD ..............T50
4162555 ..... TDS212A04000 WK15PD ..............T50
4162556 ..... TDS212A04039 WK15PD ..............T50
4162557 ..... TDS212A04090 WK15PD ..............T50
4162558 ..... TDS212A04100 WK15PD ..............T50
4162559 ..... TDS212A04200 WK15PD ..............T50
4162560 ..... TDS212A04217 WK15PD ..............T50
4162561 ..... TDS212A04300 WK15PD ..............T51
4162562 ..... TDS212A04366 WK15PD ..............T51
4162563 ..... TDS212A04400 WK15PD ..............T51
4162564 ..... TDS212A04500 WK15PD ..............T51
4162565 ..... TDS212A04600 WK15PD ..............T51
4162566 ..... TDS212A04623 WK15PD ..............T51
4162567 ..... TDS212A04700 WK15PD ..............T51
4162568 ..... TDS212A04763 WK15PD ..............T51
4162569 ..... TDS212A04800 WK15PD ..............T51
4162570 ..... TDS212A04852 WK15PD ..............T51
4162571 ..... TDS212A04900 WK15PD ..............T51
4162572 ..... TDS212A05000 WK15PD ..............T51
4162573 ..... TDS212A05100 WK15PD ..............T51
4162574 ..... TDS212A05106 WK15PD ..............T51
4162575 ..... TDS212A05159 WK15PD ..............T51
4162576 ..... TDS212A05200 WK15PD ..............T51
4162577 ..... TDS212A05300 WK15PD ..............T51
4162578 ..... TDS212A05400 WK15PD ..............T51
4162579 ..... TDS212A05410 WK15PD ..............T51
4162580 ..... TDS212A05500 WK15PD ..............T51
4162581 ..... TDS212A05558 WK15PD ..............T51
4162582 ..... TDS212A05600 WK15PD ..............T51
4162583 ..... TDS212A05616 WK15PD ..............T51
4162584 ..... TDS212A05700 WK15PD ..............T51
4162585 ..... TDS212A05800 WK15PD ..............T51
4162586 ..... TDS212A05900 WK15PD ..............T51
4162587 ..... TDS212A05954 WK15PD ..............T51
4162588 ..... TDS212A06000 WK15PD ..............T51
4162589 ..... TDS212A06100 WK15PD ..............T51
4162590 ..... TDS212A06200 WK15PD ..............T51
4162591 ..... TDS212A06300 WK15PD ..............T51
4162592 ..... TDS212A06350 WK15PD ..............T51
4162593 ..... TDS212A06400 WK15PD ..............T51
4162594 ..... TDS212A06500 WK15PD ..............T51
4162595 ..... TDS212A06528 WK15PD ..............T51
4162596 ..... TDS212A06600 WK15PD ..............T51
4162597 ..... TDS212A06630 WK15PD ..............T51
4162598 ..... TDS212A06700 WK15PD ..............T51
4162599 ..... TDS212A06746 WK15PD ..............T51
4162600 ..... TDS212A06900 WK15PD ..............T52
4162601 ..... TDS212A07000 WK15PD ..............T52
4162602 ..... TDS212A07100 WK15PD ..............T52
4162603 ..... TDS212A07145 WK15PD ..............T52
4162604 ..... TDS212A07200 WK15PD ..............T52
4162605 ..... TDS212A07300 WK15PD ..............T52
4162606 ..... TDS212A07400 WK15PD ..............T52
4162607 ..... TDS212A07500 WK15PD ..............T52
4162608 ..... TDS212A07541 WK15PD ..............T52
4162609 ..... TDS212A07600 WK15PD ..............T52
4162610 ..... TDS212A07700 WK15PD ..............T52
4162611 ..... TDS212A07800 WK15PD ..............T52
4162612 ..... TDS212A07900 WK15PD ..............T52
4162613 ..... TDS212A07938 WK15PD ..............T52
4162614 ..... TDS212A08000 WK15PD ..............T52
4162615 ..... TDS212A08100 WK15PD ..............T52
4162616 ..... TDS212A08200 WK15PD ..............T52
4162617 ..... TDS212A08300 WK15PD ..............T52
4162618 ..... TDS212A08334 WK15PD ..............T52
4162619 ..... TDS212A08400 WK15PD ..............T52
4162620 ..... TDS212A08433 WK15PD ..............T52
4162621 ..... TDS212A08500 WK15PD ..............T52
4162622 ..... TDS212A08600 WK15PD ..............T52
4162623 ..... TDS212A08700 WK15PD ..............T52
4162624 ..... TDS212A08733 WK15PD ..............T52
4162625 ..... TDS212A08800 WK15PD ..............T52
4162626 ..... TDS212A08900 WK15PD ..............T52
4162627 ..... TDS212A09000 WK15PD ..............T52
4162628 ..... TDS212A09100 WK15PD ..............T52
4162629 ..... TDS212A09129 WK15PD ..............T52
4162630 ..... TDS212A09200 WK15PD ..............T52
4162631 ..... TDS212A09300 WK15PD ..............T52
4162632 ..... TDS212A09347 WK15PD ..............T52
4162633 ..... TDS212A09400 WK15PD ..............T52
4162634 ..... TDS212A09500 WK15PD ..............T52
4162635 ..... TDS212A09525 WK15PD ..............T52
4162636 ..... TDS212A09600 WK15PD ..............T52
4162637 ..... TDS212A09700 WK15PD ..............T52
4162638 ..... TDS212A09800 WK15PD ..............T52
4162639 ..... TDS212A09900 WK15PD ..............T52
4162640 ..... TDS212A09921 WK15PD ..............T53
4162663 ..... TDS403A18654 WP20PD ..............T73
4162664 ..... TDS403A18700 WP20PD ..............T73
4162665 ..... TDS403A18800 WP20PD ..............T73
4162666 ..... TDS403A18900 WP20PD ..............T73
4162667 ..... TDS403A19000 WP20PD ..............T73
4162668 ..... TDS403A19050 WP20PD ..............T73
4162669 ..... TDS403A19100 WP20PD ..............T73
4162670 ..... TDS403A19200 WP20PD ..............T73
4162671 ..... TDS403A19300 WP20PD ..............T73
4162672 ..... TDS403A19400 WP20PD ..............T73
4162673 ..... TDS403A19500 WP20PD ..............T73
4162674 ..... TDS403A19600 WP20PD ..............T73
4162675 ..... TDS403A19700 WP20PD ..............T73
4162676 ..... TDS403A19800 WP20PD ..............T73
4162677 ..... TDS403A19900 WP20PD ..............T73
4162678 ..... TDS403A20000 WP20PD ..............T73
4162679 ..... TDS403A10000 WP20PD ..............T70
4162680 ..... TDS403A10100 WP20PD ..............T70
4162681 ..... TDS403A12500 WP20PD ..............T71
4162703 ..... TDS403A10300 WP20PD ..............T71
4162704 ..... TDS403A10320 WP20PD ..............T71
4162705 ..... TDS403A10400 WP20PD ..............T71
4162706 ..... TDS403A10500 WP20PD ..............T71
4162707 ..... TDS403A10600 WP20PD ..............T71
4162708 ..... TDS403A10700 WP20PD ..............T71
4162709 ..... TDS403A10716 WP20PD ..............T71
4162710 ..... TDS403A10800 WP20PD ..............T71
4162711 ..... TDS403A10900 WP20PD ..............T71
4162712 ..... TDS403A11000 WP20PD ..............T71
4162713 ..... TDS403A11100 WP20PD ..............T71
4162714 ..... TDS403A11113 WP20PD ..............T71
4162715 ..... TDS403A11200 WP20PD ..............T71
4162716 ..... TDS403A11300 WP20PD ..............T71
4162717 ..... TDS403A11400 WP20PD ..............T71
4162718 ..... TDS403A11500 WP20PD ..............T71
4162719 ..... TDS403A11509 WP20PD ..............T71
4162720 ..... TDS403A11600 WP20PD ..............T71
4162721 ..... TDS403A11700 WP20PD ..............T71
4162722 ..... TDS403A11800 WP20PD ..............T71
4162723 ..... TDS403A11900 WP20PD ..............T71
4162724 ..... TDS403A11908 WP20PD ..............T71
4162725 ..... TDS403A12000 WP20PD ..............T71
4162726 ..... TDS403A12100 WP20PD ..............T71
4162727 ..... TDS403A12200 WP20PD ..............T71
4162728 ..... TDS403A12300 WP20PD ..............T71
4162729 ..... TDS403A12304 WP20PD ..............T71
4162730 ..... TDS403A12400 WP20PD ..............T71
4162731 ..... TDS403A12600 WP20PD ..............T71
4162732 ..... TDS403A12700 WP20PD ..............T71
4162733 ..... TDS403A12800 WP20PD ..............T71
4162734 ..... TDS403A12900 WP20PD ..............T71
4162735 ..... TDS403A13000 WP20PD ..............T71
4162736 ..... TDS403A13096 WP20PD ..............T71
4162737 ..... TDS403A13100 WP20PD ..............T71
4162738 ..... TDS403A13200 WP20PD ..............T71
4162739 ..... TDS403A13300 WP20PD ..............T71
4162740 ..... TDS403A13400 WP20PD ..............T71
4162741 ..... TDS403A13500 WP20PD ..............T71
4162742 ..... TDS403A13600 WP20PD ..............T72
4162743 ..... TDS403A13700 WP20PD ..............T72
4162744 ..... TDS403A13800 WP20PD ..............T72
4162745 ..... TDS403A13891 WP20PD ..............T72
4162746 ..... TDS403A13900 WP20PD ..............T72
4162747 ..... TDS403A14000 WP20PD ..............T72
4162748 ..... TDS403A14100 WP20PD ..............T72
4162749 ..... TDS403A14200 WP20PD ..............T72
4162750 ..... TDS403A14288 WP20PD ..............T72
4162751 ..... TDS403A14300 WP20PD ..............T72
4162752 ..... TDS403A14400 WP20PD ..............T72
4162753 ..... TDS403A14500 WP20PD ..............T72
4162754 ..... TDS403A14600 WP20PD ..............T72
4162755 ..... TDS403A14684 WP20PD ..............T72
4162756 ..... TDS403A14700 WP20PD ..............T72
4162757 ..... TDS403A14800 WP20PD ..............T72
4162758 ..... TDS403A14900 WP20PD ..............T72
4162759 ..... TDS403A15000 WP20PD ..............T72
4162760 ..... TDS403A15083 WP20PD ..............T72
4162761 ..... TDS403A15100 WP20PD ..............T72
4162762 ..... TDS403A15200 WP20PD ..............T72
4162763 ..... TDS403A15300 WP20PD ..............T72
4162764 ..... TDS403A15400 WP20PD ..............T72
4162765 ..... TDS403A15479 WP20PD ..............T72
4162766 ..... TDS403A15500 WP20PD ..............T72
4162767 ..... TDS403A15600 WP20PD ..............T72
4162768 ..... TDS403A15700 WP20PD ..............T72
4162769 ..... TDS403A15800 WP20PD ..............T72
4162770 ..... TDS403A15875 WP20PD ..............T72
4162771 ..... TDS403A15900 WP20PD ..............T72
4162772 ..... TDS403A16000 WP20PD ..............T72
4162773 ..... TDS403A16100 WP20PD ..............T72
4162774 ..... TDS403A16200 WP20PD ..............T72
4162775 ..... TDS403A16271 WP20PD ..............T72
4162776 ..... TDS403A16300 WP20PD ..............T72
4162777 ..... TDS403A16400 WP20PD ..............T72
4162778 ..... TDS403A16500 WP20PD ..............T72
4162779 ..... TDS403A16600 WP20PD ..............T72
4162780 ..... TDS403A16670 WP20PD ..............T72
4162781 ..... TDS403A16700 WP20PD ..............T72
4162782 ..... TDS403A16800 WP20PD ..............T73
4162783 ..... TDS403A16900 WP20PD ..............T73
4162784 ..... TDS403A17000 WP20PD ..............T73
4162785 ..... TDS403A17100 WP20PD ..............T73
4162786 ..... TDS403A17200 WP20PD ..............T73
4162787 ..... TDS403A17300 WP20PD ..............T73
4162788 ..... TDS403A17400 WP20PD ..............T73
4162789 ..... TDS403A17463 WP20PD ..............T73
4162790 ..... TDS403A17500 WP20PD ..............T73
4162791 ..... TDS403A17600 WP20PD ..............T73
4162792 ..... TDS403A17700 WP20PD ..............T73
4162793 ..... TDS403A17800 WP20PD ..............T73
4162794 ..... TDS403A17859 WP20PD ..............T73
4162795 ..... TDS403A17900 WP20PD ..............T73
4162796 ..... TDS403A03000 WP20PD ..............T68
4162797 ..... TDS403A03048 WP20PD ..............T68
4162798 ..... TDS403A03100 WP20PD ..............T68
4162799 ..... TDS403A03175 WP20PD ..............T68
4162800 ..... TDS403A03200 WP20PD ..............T68
4162801 ..... TDS403A03264 WP20PD ..............T68
4162802 ..... TDS403A03300 WP20PD ..............T68
4162803 ..... TDS402A10000 WP20PD ..............T65
4162804 ..... TDS402A10100 WP20PD ..............T65
4162805 ..... TDS402A10200 WP20PD ..............T65
4162806 ..... TDS402A10300 WP20PD ..............T65
4162807 ..... TDS402A10320 WP20PD ..............T65
4162808 ..... TDS402A10400 WP20PD ..............T65
4162809 ..... TDS402A10500 WP20PD ..............T65
4162810 ..... TDS402A10600 WP20PD ..............T65
4162811 ..... TDS402A10700 WP20PD ..............T65
4162812 ..... TDS402A10716 WP20PD ..............T65
4162813 ..... TDS402A10800 WP20PD ..............T65
Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 50 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRANDO b 28 20153 09PM
Z51
widia.com
Index by Order Number
Order No. Catalogue No. Page(s)
4162814 ..... TDS402A10900 WP20PD ..............T65
4162815 ..... TDS402A11000 WP20PD ..............T65
4162816 ..... TDS402A11100 WP20PD ..............T65
4162817 ..... TDS402A11113 WP20PD ..............T65
4162818 ..... TDS402A11200 WP20PD ..............T65
4162819 ..... TDS402A11300 WP20PD ..............T65
4162820 ..... TDS402A11400 WP20PD ..............T65
4162821 ..... TDS402A11500 WP20PD ..............T65
4162822 ..... TDS402A11509 WP20PD ..............T65
4162823 ..... TDS402A11600 WP20PD ..............T65
4162824 ..... TDS402A11700 WP20PD ..............T65
4162825 ..... TDS402A11800 WP20PD ..............T65
4162826 ..... TDS402A11900 WP20PD ..............T65
4162827 ..... TDS402A11908 WP20PD ..............T65
4162828 ..... TDS402A12000 WP20PD ..............T65
4162829 ..... TDS402A12100 WP20PD ..............T65
4162830 ..... TDS402A12200 WP20PD ..............T65
4162831 ..... TDS402A12300 WP20PD ..............T65
4162832 ..... TDS402A12304 WP20PD ..............T65
4162833 ..... TDS402A12400 WP20PD ..............T65
4162834 ..... TDS402A12500 WP20PD ..............T65
4162835 ..... TDS402A12600 WP20PD ..............T65
4162836 ..... TDS402A12700 WP20PD ..............T65
4162837 ..... TDS402A12800 WP20PD ..............T65
4162838 ..... TDS402A12900 WP20PD ..............T65
4162839 ..... TDS402A13000 WP20PD ..............T65
4162840 ..... TDS402A13096 WP20PD ..............T65
4162841 ..... TDS402A13100 WP20PD ..............T65
4162842 ..... TDS402A13200 WP20PD ..............T66
4162843 ..... TDS402A13300 WP20PD ..............T66
4162844 ..... TDS402A13400 WP20PD ..............T66
4162845 ..... TDS402A13500 WP20PD ..............T66
4162846 ..... TDS402A13600 WP20PD ..............T66
4162847 ..... TDS402A13700 WP20PD ..............T66
4162848 ..... TDS402A13800 WP20PD ..............T66
4162849 ..... TDS402A13891 WP20PD ..............T66
4162850 ..... TDS402A13900 WP20PD ..............T66
4162851 ..... TDS402A14000 WP20PD ..............T66
4162852 ..... TDS402A14100 WP20PD ..............T66
4162853 ..... TDS402A14200 WP20PD ..............T66
4162854 ..... TDS402A14288 WP20PD ..............T66
4162855 ..... TDS402A14300 WP20PD ..............T66
4162856 ..... TDS402A14400 WP20PD ..............T66
4162857 ..... TDS402A14500 WP20PD ..............T66
4162858 ..... TDS402A14600 WP20PD ..............T66
4162859 ..... TDS402A14684 WP20PD ..............T66
4162860 ..... TDS402A14700 WP20PD ..............T66
4162861 ..... TDS402A14800 WP20PD ..............T66
4162862 ..... TDS402A14900 WP20PD ..............T66
4162863 ..... TDS402A15000 WP20PD ..............T66
4162864 ..... TDS402A15083 WP20PD ..............T66
4162865 ..... TDS402A15100 WP20PD ..............T66
4162866 ..... TDS402A15200 WP20PD ..............T66
4162867 ..... TDS402A15300 WP20PD ..............T66
4162868 ..... TDS402A15400 WP20PD ..............T66
4162869 ..... TDS402A15479 WP20PD ..............T66
4162870 ..... TDS402A15500 WP20PD ..............T66
4162871 ..... TDS402A15600 WP20PD ..............T66
4162872 ..... TDS402A15700 WP20PD ..............T66
4162873 ..... TDS402A15800 WP20PD ..............T66
4162874 ..... TDS402A15875 WP20PD ..............T66
4162875 ..... TDS402A15900 WP20PD ..............T66
4162876 ..... TDS402A16000 WP20PD ..............T66
4162877 ..... TDS402A16100 WP20PD ..............T66
4162878 ..... TDS402A16200 WP20PD ..............T66
4162879 ..... TDS402A16271 WP20PD ..............T66
4162880 ..... TDS402A16300 WP20PD ..............T66
4162881 ..... TDS402A16400 WP20PD ..............T66
4162882 ..... TDS402A16500 WP20PD ..............T67
4162883 ..... TDS402A16600 WP20PD ..............T67
4162884 ..... TDS402A16670 WP20PD ..............T67
4162885 ..... TDS402A16700 WP20PD ..............T67
4162886 ..... TDS402A16800 WP20PD ..............T67
4162887 ..... TDS402A16900 WP20PD ..............T67
4162888 ..... TDS402A17000 WP20PD ..............T67
4162889 ..... TDS402A17100 WP20PD ..............T67
4162890 ..... TDS402A17200 WP20PD ..............T67
4162891 ..... TDS402A17300 WP20PD ..............T67
4162892 ..... TDS402A17400 WP20PD ..............T67
4162893 ..... TDS402A17463 WP20PD ..............T67
4162894 ..... TDS402A17500 WP20PD ..............T67
4162895 ..... TDS402A17600 WP20PD ..............T67
4162896 ..... TDS402A17700 WP20PD ..............T67
4162897 ..... TDS402A17800 WP20PD ..............T67
4162898 ..... TDS402A17859 WP20PD ..............T67
4162899 ..... TDS402A17900 WP20PD ..............T67
4162950 ..... TDS401A10000 WP20PD ..............T59
4162951 ..... TDS401A10100 WP20PD ..............T59
4162952 ..... TDS401A10200 WP20PD ..............T59
4162967 ..... TDS402A03000 WP20PD ..............T62
4162968 ..... TDS402A03048 WP20PD ..............T62
4162969 ..... TDS402A03100 WP20PD ..............T62
4162970 ..... TDS402A03175 WP20PD ..............T62
4162972 ..... TDS402A03200 WP20PD ..............T62
4162983 ..... TDS402A03264 WP20PD ..............T62
4162984 ..... TDS402A03300 WP20PD ..............T62
4162985 ..... TDS402A03400 WP20PD ..............T62
4162986 ..... TDS402A03455 WP20PD ..............T62
4162987 ..... TDS402A03500 WP20PD ..............T62
4162988 ..... TDS402A03571 WP20PD ..............T62
4162989 ..... TDS402A03600 WP20PD ..............T62
4162990 ..... TDS402A03658 WP20PD ..............T62
4162991 ..... TDS402A03700 WP20PD ..............T62
4162992 ..... TDS402A03734 WP20PD ..............T62
4162993 ..... TDS402A03800 WP20PD ..............T62
4162994 ..... TDS402A03900 WP20PD ..............T62
4162995 ..... TDS402A03970 WP20PD ..............T62
4162996 ..... TDS402A04000 WP20PD ..............T62
4162997 ..... TDS402A04039 WP20PD ..............T62
4162998 ..... TDS402A04090 WP20PD ..............T62
4162999 ..... TDS402A04100 WP20PD ..............T62
4163000 ..... TDS402A04200 WP20PD ..............T62
4163001 ..... TDS402A04217 WP20PD ..............T62
4163002 ..... TDS402A04300 WP20PD ..............T63
4163013 ..... TDS402A04366 WP20PD ..............T63
4163014 ..... TDS402A04400 WP20PD ..............T63
4163015 ..... TDS402A04500 WP20PD ..............T63
4163016 ..... TDS402A04600 WP20PD ..............T63
4163017 ..... TDS402A04623 WP20PD ..............T63
4163018 ..... TDS402A04700 WP20PD ..............T63
4163019 ..... TDS402A04763 WP20PD ..............T63
4163020 ..... TDS402A04800 WP20PD ..............T63
4163021 ..... TDS402A04852 WP20PD ..............T63
4163022 ..... TDS402A04900 WP20PD ..............T63
4163023 ..... TDS402A05000 WP20PD ..............T63
4163024 ..... TDS402A05100 WP20PD ..............T63
4163025 ..... TDS402A05106 WP20PD ..............T63
4163026 ..... TDS402A05159 WP20PD ..............T63
4163027 ..... TDS402A05200 WP20PD ..............T63
4163028 ..... TDS402A05300 WP20PD ..............T63
4163029 ..... TDS402A05400 WP20PD ..............T63
4163030 ..... TDS402A05410 WP20PD ..............T63
4163031 ..... TDS402A05500 WP20PD ..............T63
4163032 ..... TDS402A05558 WP20PD ..............T63
4163034 ..... TDS402A05600 WP20PD ..............T63
4163035 ..... TDS402A05616 WP20PD ..............T63
4163036 ..... TDS402A05700 WP20PD ..............T63
4163037 ..... TDS402A05800 WP20PD ..............T63
4163038 ..... TDS402A05900 WP20PD ..............T63
4163039 ..... TDS402A05954 WP20PD ..............T63
4163040 ..... TDS402A06000 WP20PD ..............T63
4163041 ..... TDS402A06100 WP20PD ..............T63
4163042 ..... TDS402A06200 WP20PD ..............T63
4163043 ..... TDS402A06300 WP20PD ..............T63
4163044 ..... TDS402A06350 WP20PD ..............T63
4163045 ..... TDS402A06400 WP20PD ..............T63
4163046 ..... TDS402A06500 WP20PD ..............T63
4163047 ..... TDS402A06528 WP20PD ..............T63
4163048 ..... TDS402A06600 WP20PD ..............T63
4163049 ..... TDS402A06630 WP20PD ..............T63
4163050 ..... TDS402A06700 WP20PD ..............T63
4163051 ..... TDS402A06746 WP20PD ..............T63
4163052 ..... TDS402A06800 WP20PD ..............T63
4163053 ..... TDS402A06900 WP20PD ..............T64
4163054 ..... TDS402A07000 WP20PD ..............T64
4163055 ..... TDS402A07100 WP20PD ..............T64
4163056 ..... TDS402A07145 WP20PD ..............T64
4163057 ..... TDS402A07200 WP20PD ..............T64
4163058 ..... TDS402A07300 WP20PD ..............T64
4163059 ..... TDS402A07400 WP20PD ..............T64
4163060 ..... TDS402A07500 WP20PD ..............T64
4163061 ..... TDS402A07541 WP20PD ..............T64
4163062 ..... TDS402A07600 WP20PD ..............T64
4163063 ..... TDS402A07700 WP20PD ..............T64
4163064 ..... TDS402A07800 WP20PD ..............T64
4163065 ..... TDS402A07900 WP20PD ..............T64
4163066 ..... TDS402A07938 WP20PD ..............T64
4163067 ..... TDS402A08000 WP20PD ..............T64
4163068 ..... TDS402A08100 WP20PD ..............T64
4163069 ..... TDS402A08200 WP20PD ..............T64
4163070 ..... TDS402A08300 WP20PD ..............T64
4163071 ..... TDS402A08334 WP20PD ..............T64
4163072 ..... TDS402A08400 WP20PD ..............T64
4163073 ..... TDS402A08433 WP20PD ..............T64
4163074 ..... TDS402A08500 WP20PD ..............T64
4163075 ..... TDS402A08600 WP20PD ..............T64
4163077 ..... TDS402A08700 WP20PD ..............T64
4163078 ..... TDS402A08733 WP20PD ..............T64
4163079 ..... TDS402A08800 WP20PD ..............T64
4163080 ..... TDS402A08900 WP20PD ..............T64
4163081 ..... TDS402A09000 WP20PD ..............T64
4163082 ..... TDS402A09100 WP20PD ..............T64
4163083 ..... TDS402A09129 WP20PD ..............T64
4163084 ..... TDS402A09200 WP20PD ..............T64
4163085 ..... TDS402A09300 WP20PD ..............T64
4163086 ..... TDS402A09347 WP20PD ..............T64
4163087 ..... TDS402A09400 WP20PD ..............T64
4163088 ..... TDS402A09500 WP20PD ..............T64
4163089 ..... TDS402A09525 WP20PD ..............T64
4163090 ..... TDS402A09600 WP20PD ..............T64
4163091 ..... TDS402A09700 WP20PD ..............T64
4163092 ..... TDS402A09800 WP20PD ..............T64
4163093 ..... TDS402A09900 WP20PD ..............T64
4163094 ..... TDS402A09921 WP20PD ..............T65
4163163 ..... TDS403A03400 WP20PD ..............T68
4163164 ..... TDS403A03455 WP20PD ..............T68
4163165 ..... TDS403A03500 WP20PD ..............T68
4163166 ..... TDS403A03571 WP20PD ..............T68
4163167 ..... TDS403A03600 WP20PD ..............T68
4163168 ..... TDS403A03658 WP20PD ..............T68
4163169 ..... TDS403A03700 WP20PD ..............T68
4163170 ..... TDS403A03734 WP20PD ..............T68
4163171 ..... TDS403A03800 WP20PD ..............T68
4163172 ..... TDS403A03900 WP20PD ..............T68
4163173 ..... TDS403A03970 WP20PD ..............T68
4163174 ..... TDS403A04000 WP20PD ..............T68
4163175 ..... TDS403A04039 WP20PD ..............T68
4163176 ..... TDS403A04090 WP20PD ..............T68
4163177 ..... TDS403A04100 WP20PD ..............T68
4163178 ..... TDS403A04200 WP20PD ..............T68
4163179 ..... TDS403A04217 WP20PD ..............T68
4163180 ..... TDS403A04300 WP20PD ..............T68
4163181 ..... TDS403A04366 WP20PD ..............T68
4163182 ..... TDS403A04400 WP20PD ..............T68
4163193 ..... TDS403A04500 WP20PD ..............T68
4163194 ..... TDS403A04600 WP20PD ..............T69
4163195 ..... TDS403A04623 WP20PD ..............T69
4163196 ..... TDS403A04700 WP20PD ..............T69
4163197 ..... TDS403A04763 WP20PD ..............T69
4163198 ..... TDS403A04800 WP20PD ..............T69
4163199 ..... TDS403A04852 WP20PD ..............T69
4163200 ..... TDS403A04900 WP20PD ..............T69
4163201 ..... TDS403A05000 WP20PD ..............T69
4163202 ..... TDS403A05100 WP20PD ..............T69
4163203 ..... TDS403A05106 WP20PD ..............T69
4163204 ..... TDS403A05159 WP20PD ..............T69
4163205 ..... TDS403A05200 WP20PD ..............T69
4163206 ..... TDS403A05300 WP20PD ..............T69
4163207 ..... TDS403A05400 WP20PD ..............T69
4163208 ..... TDS403A05410 WP20PD ..............T69
4163209 ..... TDS403A05500 WP20PD ..............T69
4163210 ..... TDS403A05558 WP20PD ..............T69
4163211 ..... TDS403A05600 WP20PD ..............T69
4163212 ..... TDS403A05616 WP20PD ..............T69
4163213 ..... TDS403A05700 WP20PD ..............T69
4163214 ..... TDS403A05800 WP20PD ..............T69
4163215 ..... TDS403A05900 WP20PD ..............T69
4163216 ..... TDS403A05954 WP20PD ..............T69
4163217 ..... TDS403A06000 WP20PD ..............T69
4163218 ..... TDS403A06100 WP20PD ..............T69
4163219 ..... TDS403A06200 WP20PD ..............T69
4163220 ..... TDS403A06300 WP20PD ..............T69
4163221 ..... TDS403A06350 WP20PD ..............T69
4163222 ..... TDS403A06400 WP20PD ..............T69
4163223 ..... TDS403A06500 WP20PD ..............T69
4163224 ..... TDS403A06528 WP20PD ..............T69
4163225 ..... TDS403A06600 WP20PD ..............T69
4163226 ..... TDS403A06630 WP20PD ..............T69
4163227 ..... TDS403A06700 WP20PD ..............T69
4163228 ..... TDS403A06746 WP20PD ..............T69
4163229 ..... TDS403A06800 WP20PD ..............T69
4163230 ..... TDS403A06900 WP20PD ..............T69
4163231 ..... TDS403A07000 WP20PD ..............T69
4163232 ..... TDS403A07100 WP20PD ..............T69
4163233 ..... TDS403A07145 WP20PD ..............T69
4163234 ..... TDS403A07200 WP20PD ..............T70
4163235 ..... TDS403A07300 WP20PD ..............T70
4163236 ..... TDS403A07400 WP20PD ..............T70
4163237 ..... TDS403A07500 WP20PD ..............T70
4163238 ..... TDS403A07541 WP20PD ..............T70
4163239 ..... TDS403A07600 WP20PD ..............T70
4163240 ..... TDS403A07700 WP20PD ..............T70
4163241 ..... TDS403A07800 WP20PD ..............T70
4163242 ..... TDS403A07900 WP20PD ..............T70
Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 51 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRAND O b 28 2015 3 09 PM
Z52 widia.com
Index by Order Number
Order No. Catalogue No. Page(s)
4163243 ..... TDS403A07938 WP20PD ..............T70
4163244 ..... TDS403A08000 WP20PD ..............T70
4163245 ..... TDS403A08100 WP20PD ..............T70
4163246 ..... TDS403A08200 WP20PD ..............T70
4163247 ..... TDS403A08300 WP20PD ..............T70
4163248 ..... TDS403A08334 WP20PD ..............T70
4163249 ..... TDS403A08400 WP20PD ..............T70
4163250 ..... TDS403A08433 WP20PD ..............T70
4163251 ..... TDS403A08500 WP20PD ..............T70
4163252 ..... TDS403A08600 WP20PD ..............T70
4163253 ..... TDS403A08700 WP20PD ..............T70
4163254 ..... TDS403A08733 WP20PD ..............T70
4163255 ..... TDS403A08800 WP20PD ..............T70
4163256 ..... TDS403A08900 WP20PD ..............T70
4163257 ..... TDS403A09000 WP20PD ..............T70
4163258 ..... TDS403A09100 WP20PD ..............T70
4163259 ..... TDS403A09129 WP20PD ..............T70
4163260 ..... TDS403A09200 WP20PD ..............T70
4163261 ..... TDS403A09300 WP20PD ..............T70
4163262 ..... TDS403A09347 WP20PD ..............T70
4163263 ..... TDS403A09400 WP20PD ..............T70
4163264 ..... TDS403A09500 WP20PD ..............T70
4163265 ..... TDS403A09525 WP20PD ..............T70
4163266 ..... TDS403A09600 WP20PD ..............T70
4163267 ..... TDS403A09700 WP20PD ..............T70
4163268 ..... TDS403A09800 WP20PD ..............T70
4163269 ..... TDS403A09900 WP20PD ..............T70
4163270 ..... TDS403A09921 WP20PD ..............T70
4163271 ..... TDS401A18000 WP20PD ..............T61
4163272 ..... TDS401A18100 WP20PD ..............T61
4163283 ..... TDS401A18200 WP20PD ..............T61
4163284 ..... TDS401A18258 WP20PD ..............T61
4163285 ..... TDS401A18300 WP20PD ..............T61
4163286 ..... TDS401A18400 WP20PD ..............T61
4163287 ..... TDS401A18500 WP20PD ..............T61
4163288 ..... TDS401A18600 WP20PD ..............T61
4163289 ..... TDS401A18654 WP20PD ..............T61
4163290 ..... TDS401A18700 WP20PD ..............T61
4163291 ..... TDS401A18800 WP20PD ..............T61
4163292 ..... TDS401A18900 WP20PD ..............T61
4163293 ..... TDS401A19000 WP20PD ..............T61
4163294 ..... TDS401A19050 WP20PD ..............T61
4163295 ..... TDS401A19100 WP20PD ..............T61
4163296 ..... TDS401A19200 WP20PD ..............T61
4163297 ..... TDS401A19300 WP20PD ..............T61
4163298 ..... TDS401A19400 WP20PD ..............T61
4163299 ..... TDS401A19500 WP20PD ..............T61
4163300 ..... TDS401A19600 WP20PD ..............T61
4163301 ..... TDS401A19700 WP20PD ..............T61
4163302 ..... TDS401A19800 WP20PD ..............T61
4163303 ..... TDS401A19900 WP20PD ..............T61
4163304 ..... TDS401A20000 WP20PD ..............T61
4163305 ..... TDS202A18200 WP20PD ..............T55
4163306 ..... TDS202A18258 WP20PD ..............T55
4163307 ..... TDS202A18300 WP20PD ..............T55
4163308 ..... TDS202A18400 WP20PD ..............T55
4163309 ..... TDS202A18500 WP20PD ..............T55
4163310 ..... TDS202A18600 WP20PD ..............T55
4163311 ..... TDS202A18654 WP20PD ..............T55
4163312 ..... TDS202A18700 WP20PD ..............T55
4163313 ..... TDS202A18000 WP20PD ..............T55
4163314 ..... TDS202A18100 WP20PD ..............T55
4163315 ..... TDS401A03000 WP20PD ..............T56
4163323 ..... TDS202A18800 WP20PD ..............T55
4163324 ..... TDS202A18900 WP20PD ..............T55
4163325 ..... TDS202A19000 WP20PD ..............T55
4163326 ..... TDS202A19050 WP20PD ..............T55
4163327 ..... TDS202A19100 WP20PD ..............T55
4163328 ..... TDS202A19200 WP20PD ..............T55
4163329 ..... TDS202A19300 WP20PD ..............T55
4163330 ..... TDS202A19400 WP20PD ..............T55
4163331 ..... TDS202A19500 WP20PD ..............T55
4163332 ..... TDS202A19600 WP20PD ..............T55
4163333 ..... TDS202A19700 WP20PD ..............T55
4163334 ..... TDS202A19800 WP20PD ..............T55
4163335 ..... TDS202A19900 WP20PD ..............T55
4163336 ..... TDS202A20000 WP20PD ..............T55
4163337 ..... TDS401A03048 WP20PD ..............T56
4163338 ..... TDS401A03100 WP20PD ..............T56
4163339 ..... TDS401A03175 WP20PD ..............T56
4163340 ..... TDS401A03200 WP20PD ..............T56
4163341 ..... TDS401A03264 WP20PD ..............T56
4163342 ..... TDS401A03300 WP20PD ..............T56
4163343 ..... TDS401A10300 WP20PD ..............T59
4163344 ..... TDS401A10320 WP20PD ..............T59
4163345 ..... TDS401A10400 WP20PD ..............T59
4163346 ..... TDS401A10500 WP20PD ..............T59
4163347 ..... TDS401A10600 WP20PD ..............T59
4163348 ..... TDS401A10700 WP20PD ..............T59
4163349 ..... TDS401A10716 WP20PD ..............T59
4163350 ..... TDS401A10800 WP20PD ..............T59
4163351 ..... TDS401A10900 WP20PD ..............T59
4163352 ..... TDS401A11000 WP20PD ..............T59
4163353 ..... TDS401A11100 WP20PD ..............T59
4163354 ..... TDS401A11113 WP20PD ..............T59
4163355 ..... TDS401A11200 WP20PD ..............T59
4163356 ..... TDS401A11300 WP20PD ..............T59
4163357 ..... TDS401A11400 WP20PD ..............T59
4163358 ..... TDS401A11500 WP20PD ..............T59
4163359 ..... TDS401A11509 WP20PD ..............T59
4163360 ..... TDS401A11600 WP20PD ..............T59
4163361 ..... TDS401A11700 WP20PD ..............T59
4163362 ..... TDS401A11800 WP20PD ..............T59
4163363 ..... TDS401A11900 WP20PD ..............T59
4163364 ..... TDS401A11908 WP20PD ..............T59
4163365 ..... TDS401A12000 WP20PD ..............T59
4163366 ..... TDS401A12100 WP20PD ..............T59
4163367 ..... TDS401A12200 WP20PD ..............T59
4163368 ..... TDS401A12300 WP20PD ..............T59
4163369 ..... TDS401A12304 WP20PD ..............T59
4163370 ..... TDS401A12400 WP20PD ..............T59
4163371 ..... TDS401A12500 WP20PD ..............T59
4163372 ..... TDS401A12600 WP20PD ..............T59
4163373 ..... TDS401A12700 WP20PD ..............T59
4163374 ..... TDS401A12800 WP20PD ..............T59
4163375 ..... TDS401A12900 WP20PD ..............T59
4163376 ..... TDS401A13000 WP20PD ..............T59
4163377 ..... TDS401A13096 WP20PD ..............T59
4163378 ..... TDS401A13100 WP20PD ..............T59
4163379 ..... TDS401A13200 WP20PD ..............T60
4163380 ..... TDS401A13300 WP20PD ..............T60
4163381 ..... TDS401A13400 WP20PD ..............T60
4163382 ..... TDS401A13500 WP20PD ..............T60
4163383 ..... TDS401A13600 WP20PD ..............T60
4163384 ..... TDS401A13700 WP20PD ..............T60
4163385 ..... TDS401A13800 WP20PD ..............T60
4163386 ..... TDS401A13891 WP20PD ..............T60
4163387 ..... TDS401A13900 WP20PD ..............T60
4163388 ..... TDS401A14000 WP20PD ..............T60
4163389 ..... TDS401A14100 WP20PD ..............T60
4163390 ..... TDS401A14200 WP20PD ..............T60
4163391 ..... TDS401A14288 WP20PD ..............T60
4163392 ..... TDS401A14300 WP20PD ..............T60
4163393 ..... TDS401A14400 WP20PD ..............T60
4163394 ..... TDS401A14500 WP20PD ..............T60
4163395 ..... TDS401A14600 WP20PD ..............T60
4163396 ..... TDS401A14684 WP20PD ..............T60
4163397 ..... TDS401A14700 WP20PD ..............T60
4163398 ..... TDS401A14800 WP20PD ..............T60
4163399 ..... TDS401A14900 WP20PD ..............T60
4163400 ..... TDS401A15000 WP20PD ..............T60
4163401 ..... TDS401A15083 WP20PD ..............T60
4163402 ..... TDS401A15100 WP20PD ..............T60
4163403 ..... TDS401A15200 WP20PD ..............T60
4163404 ..... TDS401A15300 WP20PD ..............T60
4163405 ..... TDS401A15400 WP20PD ..............T60
4163406 ..... TDS401A15479 WP20PD ..............T60
4163407 ..... TDS401A15500 WP20PD ..............T60
4163408 ..... TDS401A15600 WP20PD ..............T60
4163409 ..... TDS401A15700 WP20PD ..............T60
4163410 ..... TDS401A15800 WP20PD ..............T60
4163411 ..... TDS401A15875 WP20PD ..............T60
4163412 ..... TDS401A15900 WP20PD ..............T60
4163413 ..... TDS401A16000 WP20PD ..............T60
4163414 ..... TDS401A16100 WP20PD ..............T60
4163415 ..... TDS401A16200 WP20PD ..............T60
4163416 ..... TDS401A16271 WP20PD ..............T60
4163417 ..... TDS401A16300 WP20PD ..............T60
4163418 ..... TDS401A16400 WP20PD ..............T60
4163419 ..... TDS401A16500 WP20PD ..............T61
4163420 ..... TDS401A16600 WP20PD ..............T61
4163421 ..... TDS401A16670 WP20PD ..............T61
4163422 ..... TDS401A16700 WP20PD ..............T61
4163423 ..... TDS401A16800 WP20PD ..............T61
4163424 ..... TDS401A16900 WP20PD ..............T61
4163425 ..... TDS401A17000 WP20PD ..............T61
4163426 ..... TDS401A17100 WP20PD ..............T61
4163427 ..... TDS401A17200 WP20PD ..............T61
4163428 ..... TDS401A17300 WP20PD ..............T61
4163429 ..... TDS401A17400 WP20PD ..............T61
4163430 ..... TDS401A17463 WP20PD ..............T61
4163431 ..... TDS401A17500 WP20PD ..............T61
4163432 ..... TDS401A17600 WP20PD ..............T61
4163433 ..... TDS401A17700 WP20PD ..............T61
4163434 ..... TDS401A17800 WP20PD ..............T61
4163435 ..... TDS401A17859 WP20PD ..............T61
4163436 ..... TDS401A17900 WP20PD ..............T61
4163463 ..... TDS401A03400 WP20PD ..............T56
4163464 ..... TDS401A03455 WP20PD ..............T56
4163465 ..... TDS401A03500 WP20PD ..............T56
4163466 ..... TDS401A03571 WP20PD ..............T56
4163467 ..... TDS401A03600 WP20PD ..............T56
4163468 ..... TDS401A03658 WP20PD ..............T56
4163469 ..... TDS401A03700 WP20PD ..............T56
4163470 ..... TDS401A03734 WP20PD ..............T56
4163471 ..... TDS401A03800 WP20PD ..............T56
4163472 ..... TDS401A03900 WP20PD ..............T56
4163473 ..... TDS401A03970 WP20PD ..............T56
4163474 ..... TDS401A04000 WP20PD ..............T56
4163475 ..... TDS401A04039 WP20PD ..............T56
4163476 ..... TDS401A04090 WP20PD ..............T56
4163477 ..... TDS401A04100 WP20PD ..............T56
4163478 ..... TDS401A04200 WP20PD ..............T56
4163479 ..... TDS401A04217 WP20PD ..............T56
4163480 ..... TDS401A04300 WP20PD ..............T57
4163481 ..... TDS401A04366 WP20PD ..............T57
4163482 ..... TDS401A04400 WP20PD ..............T57
4163483 ..... TDS401A04500 WP20PD ..............T57
4163484 ..... TDS401A04600 WP20PD ..............T57
4163485 ..... TDS401A04623 WP20PD ..............T57
4163486 ..... TDS401A04700 WP20PD ..............T57
4163487 ..... TDS401A04763 WP20PD ..............T57
4163488 ..... TDS401A04800 WP20PD ..............T57
4163489 ..... TDS401A04852 WP20PD ..............T57
4163490 ..... TDS401A04900 WP20PD ..............T57
4163491 ..... TDS401A05000 WP20PD ..............T57
4163492 ..... TDS401A05100 WP20PD ..............T57
4163493 ..... TDS401A05106 WP20PD ..............T57
4163494 ..... TDS401A05159 WP20PD ..............T57
4163495 ..... TDS401A05200 WP20PD ..............T57
4163496 ..... TDS401A05300 WP20PD ..............T57
4163497 ..... TDS401A05400 WP20PD ..............T57
4163498 ..... TDS401A05410 WP20PD ..............T57
4163499 ..... TDS401A05500 WP20PD ..............T57
4163500 ..... TDS401A05558 WP20PD ..............T57
4163501 ..... TDS401A05600 WP20PD ..............T57
4163502 ..... TDS401A05616 WP20PD ..............T57
4163503 ..... TDS401A05700 WP20PD ..............T57
4163504 ..... TDS401A05800 WP20PD ..............T57
4163505 ..... TDS401A05900 WP20PD ..............T57
4163506 ..... TDS401A05954 WP20PD ..............T57
4163507 ..... TDS401A06000 WP20PD ..............T57
4163508 ..... TDS401A06100 WP20PD ..............T57
4163509 ..... TDS401A06200 WP20PD ..............T57
4163510 ..... TDS401A06300 WP20PD ..............T57
4163511 ..... TDS401A06350 WP20PD ..............T57
4163512 ..... TDS401A06400 WP20PD ..............T57
4163513 ..... TDS401A06500 WP20PD ..............T57
4163514 ..... TDS401A06528 WP20PD ..............T57
4163515 ..... TDS401A06600 WP20PD ..............T57
4163516 ..... TDS401A06630 WP20PD ..............T57
4163517 ..... TDS401A06700 WP20PD ..............T57
4163518 ..... TDS401A06746 WP20PD ..............T57
4163519 ..... TDS401A06800 WP20PD ..............T57
4163520 ..... TDS401A06900 WP20PD ..............T58
4163521 ..... TDS401A07000 WP20PD ..............T58
4163522 ..... TDS401A07100 WP20PD ..............T58
4163523 ..... TDS401A07145 WP20PD ..............T58
4163524 ..... TDS401A07200 WP20PD ..............T58
4163525 ..... TDS401A07300 WP20PD ..............T58
4163526 ..... TDS401A07400 WP20PD ..............T58
4163527 ..... TDS401A07500 WP20PD ..............T58
4163528 ..... TDS401A07541 WP20PD ..............T58
4163529 ..... TDS401A07600 WP20PD ..............T58
4163530 ..... TDS401A07700 WP20PD ..............T58
4163531 ..... TDS401A07800 WP20PD ..............T58
4163532 ..... TDS401A07900 WP20PD ..............T58
4163533 ..... TDS401A07938 WP20PD ..............T58
4163534 ..... TDS401A08000 WP20PD ..............T58
4163535 ..... TDS401A08100 WP20PD ..............T58
4163536 ..... TDS401A08200 WP20PD ..............T58
4163537 ..... TDS401A08300 WP20PD ..............T58
4163538 ..... TDS401A08334 WP20PD ..............T58
4163539 ..... TDS401A08400 WP20PD ..............T58
4163540 ..... TDS401A08433 WP20PD ..............T58
4163541 ..... TDS401A08500 WP20PD ..............T58
4163542 ..... TDS401A08600 WP20PD ..............T58
4163543 ..... TDS401A08700 WP20PD ..............T58
4163544 ..... TDS401A08733 WP20PD ..............T58
4163545 ..... TDS401A08800 WP20PD ..............T58
4163546 ..... TDS401A08900 WP20PD ..............T58
4163547 ..... TDS401A09000 WP20PD ..............T58
4163548 ..... TDS401A09100 WP20PD ..............T58
4163549 ..... TDS401A09129 WP20PD ..............T58
Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 52 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRANDO b 28 20153 09PM
Z53
widia.com
Index by Order Number
Order No. Catalogue No. Page(s)
4163550 ..... TDS401A09200 WP20PD ..............T58
4163551 ..... TDS401A09300 WP20PD ..............T58
4163552 ..... TDS401A09347 WP20PD ..............T58
4163553 ..... TDS401A09400 WP20PD ..............T58
4163554 ..... TDS401A09500 WP20PD ..............T58
4163555 ..... TDS401A09525 WP20PD ..............T58
4163556 ..... TDS401A09600 WP20PD ..............T58
4163557 ..... TDS401A09700 WP20PD ..............T58
4163558 ..... TDS401A09800 WP20PD ..............T58
4163559 ..... TDS401A09900 WP20PD ..............T58
4163560 ..... TDS401A09921 WP20PD ..............T59
4163978 ..... CCGT0602021P TN10U .............. B122
4163979 ..... CCGT0602021P TN15U .............. B122
4163980 ..... CCGT0602041P TN10U .............. B122
4163981 ..... CCGT0602041P TN15U .............. B122
4163982 ..... CCGT0602081P TN10U .............. B122
4164493 ..... CCGT09T3021P TN10U .............. B122
4164494 ..... CCGT09T3021P TN15U .............. B122
4164495 ..... CCGT09T3011P TN10U .............. B122
4164496 ..... CCGT09T3011P TN15U .............. B122
4164497 ..... CCGT09T3041P TN10U .............. B122
4164498 ..... CCGT09T3041P TN15U .............. B122
4164499 ..... CCGT09T3081P TN10U .............. B122
4164500 ..... CCGT09T3081P TN15U .............. B122
4164501 ..... DCGT0702011P TN10U .............. B129
4164502 ..... DCGT0702011P TN15U .............. B129
4164523 ..... DCGT11T3011P TN10U .............. B129
4164524 ..... DCGT11T3011P TN15U .............. B129
4164525 ..... DCGT1504081P TN10U .............. B129
4164526 ..... TCGT1102011P TN10U ............... B138
4164527 ..... TCGT1102011P TN15U ............... B138
4164528 ..... TCGT1102041P TN10U ............... B138
4164529 ..... TCGT1102041P TN15U ............... B138
4164530 ..... TCGT16T3021P TN10U ............... B138
4164531 ..... TCGT16T3041P TN10U ............... B138
4164532 ..... TCGT16T3041P TN15U ............... B138
4164543 ..... TCGT16T3081P TN10U ............... B138
4164544 ..... VBGT1103021P TN10U ............... B144
4164545 ..... VBGT1103021P TN15U ............... B144
4164546 ..... VBGT1103011P TN10U ............... B144
4164547 ..... VBGT1103011P TN15U ............... B144
4164548 ..... VBGT1103041P TN10U ............... B144
4164549 ..... VBGT1604021P TN10U ............... B144
4164550 ..... VBGT1604021P TN15U ............... B144
4164551 ..... VBGT1604011P TN10U ............... B144
4164552 ..... VBGT1604041P TN10U ............... B144
4164563 ..... VBGT1604041P TN15U ............... B144
4164564 ..... CNGP120402 TN10U .......... B35, B124
4164565 ..... CNGP120401 TN10U .......... B35, B124
4164566 ..... CNGP120404 TN10U .......... B35, B124
4164567 ..... CNGP120404 TN15U .................. B124
4164568 ..... CNGP120408 TN10U .......... B35, B124
4164569 ..... CNGP120408 TN15U .................. B124
4164570 ..... CNGP120412 TN10U .................. B124
4164571 ..... CNGP120412 TN15U .................. B124
4164572 ..... DNGP150402 TN10U .......... B52, B130
4164783 ..... DNGP150402 TN15U .................. B130
4164784 ..... DNGP150401 TN10U .......... B52, B130
4164785 ..... DNGP150404 TN10U .......... B52, B130
4164786 ..... DNGP150404 TN15U .................. B130
4164787 ..... DNGP150408 TN10U .......... B52, B130
4164788 ..... DNGP150408 TN15U .................. B130
4164789 ..... TNGP160402 TN10U................... B140
4164790 ..... TNGP160402 TN15U................... B140
4164791 ..... TNGP160404 TN10U................... B140
4164792 ..... TNGP160404 TN15U................... B140
4164793 ..... TNGP160408 TN10U................... B140
4164794 ..... VNGP160402 TN10U .......... B96, B145
4164795 ..... VNGP160401 TN10U .......... B96, B145
4164796 ..... VNGP160401 TN15U .................. B145
4164797 ..... VNGP220404 TN10U .......... B96, B145
4164798 ..... VNGP220404 TN15U .................. B145
4164799 ..... VNGP220408 TN10U .......... B96, B145
4164800 ..... VNGP220408 TN15U .................. B145
4165244 ..... CCMT0602021P TN10P .............. B123
4165245 ..... CCMT0602021P TN20K .............. B123
4165470 ..... CNMA120404 TN20K .................. B125
4165471 ..... CNMA120408 TN20K .................. B125
4165472 ..... CNMA120412 TN20K .................. B125
4165830 ..... CNMG1204044P TN15M ............ B126
4165831 ..... CNMG1204044P TN30M ............ B126
4165832 ..... CNMG1204084P TN15M ............ B126
4165833 ..... CNMA120416 TN20K .......... B36, B125
4165834 ..... CNMA160612 TN20K .......... B36, B125
4165835 ..... CNMA160616 TN20K .......... B36, B125
4165836 ..... CNMA190612 TN20K .......... B36, B125
4165837 ..... CNMA190616 TN20K .......... B36, B125
4165838 ..... DNMA150408 TN20K ................. B130
4165839 ..... DNMA150412 TN20K ................. B130
4165840 ..... DNMA150608 TN20K ................. B130
4165841 ..... DNMA150612 TN20K ................. B130
4165842 ..... SNMA120408 TN20K .................. B134
4165843 ..... SNMA120412 TN20K .................. B134
4165844 ..... SNMA150612 TN20K .......... B71, B134
4165845 ..... SNMA190612 TN20K .......... B71, B134
4165846 ..... TNMA160408 TN20K .................. B140
4165847 ..... TNMA160412 TN20K .................. B140
4165848 ..... TNMA220408 TN20K .................. B140
4165849 ..... VNMA160408 TN20K .................. B145
4165850 ..... WNMA060408 TN20K ................. B147
4165851 ..... WNMA080408 TN20K ................. B147
4165852 ..... WNMA080412 TN20K ................. B147
4165853 ..... CNMG1204084P TN30M ............ B126
4165854 ..... CNMG1204124P TN15M ............ B126
4165855 ..... CNMG1204124P TN30M ............ B126
4165856 ..... CNMG1606124P TN15M ............ B126
4165857 ..... CNMG1606124P TN30M ............ B126
4165858 ..... CNMG1906124P TN15M ............ B126
4165859 ..... CNMG1906124P TN30M ............ B126
4165860 ..... DNMG1504044P TN15M ............ B131
4165861 ..... DNMG1504044P TN30M ............ B131
4165862 ..... DNMG1504084P TN15M ............ B131
4165863 ..... DNMG1504084P TN30M ............ B131
4165864 ..... DNMG1506044P TN15M ............ B131
4165865 ..... DNMG1506044P TN30M ............ B131
4165866 ..... DNMG1506084P TN15M ............ B131
4165867 ..... DNMG1506084P TN30M ............ B131
4165868 ..... DNMG1506124P TN15M ............ B131
4165869 ..... DNMG1506124P TN30M ............ B131
4165870 ..... SNMG1204084P TN15M............. B135
4165871 ..... SNMG1204084P TN30M............. B135
4165872 ..... SNMG1204124P TN15M............. B135
4165873 ..... SNMG1204124P TN30M............. B135
4165874 ..... TNMG1604044P TN15M ............. B141
4165875 ..... TNMG1604044P TN30M ............. B141
4165876 ..... TNMG1604084P TN15M ............. B141
4165877 ..... TNMG1604084P TN30M ............. B141
4165878 ..... TNMG1604124P TN15M ............. B141
4165879 ..... TNMG1604124P TN30M ............. B141
4165880 ..... TNMG2204044P TN15M ............. B141
4165881 ..... TNMG2204044P TN30M ............. B141
4165882 ..... TNMG2204084P TN15M ............. B141
4165883 ..... TNMG2204084P TN30M ............. B141
4165884 ..... VNMG1604044P TN15M ............. B146
4165885 ..... VNMG1604044P TN30M ............. B146
4165886 ..... VNMG1604084P TN15M ............. B146
4165887 ..... VNMG1604084P TN30M ............. B146
4165888 ..... WNMG0804044P TN15M ........... B148
4165889 ..... WNMG0804044P TN30M ........... B148
4165890 ..... WNMG0804084P TN15M ........... B148
4165891 ..... WNMG0804084P TN30M ........... B148
4165892 ..... WNMG0804124P TN30M ........... B148
4165948 ..... CNMG0903086P TN10P ............. B127
4165949 ..... CNMG0903086P TN20P ............. B127
4165950 ..... CNMG0903086P TN15M ............ B127
4165951 ..... CNMG0903086P TN30M ............ B127
4165952 ..... CNMG1204046P TN10P ............. B127
4165963 ..... CNMG1204046P TN20P ............. B127
4165964 ..... CNMG1204046P TN15M ............ B127
4165965 ..... CNMG1204046P TN30M ............ B127
4165966 ..... CNMG1204086P TN10P ............. B127
4165967 ..... CNMG1204086P TN20P ............. B127
4165968 ..... CNMG1204086P TN30P ............. B127
4165969 ..... CNMG1204086P TN15M ............ B127
4165970 ..... CNMG1204086P TN30M ............ B127
4165971 ..... CNMG1204126P TN10P ............. B127
4165972 ..... CNMG1204126P TN20P ............. B127
4165973 ..... CNMG1204126P TN30P ............. B127
4165974 ..... CNMG1204126P TN15M ............ B127
4165975 ..... CNMG1204126P TN30M ............ B127
4165976 ..... CNMG1606126P TN20P ............. B127
4165977 ..... CNMG1606126P TN30P ............. B127
4165978 ..... CNMG1606126P TN15M ............ B127
4165979 ..... CNMG1606126P TN30M ............ B127
4165980 ..... CNMG1906126P TN20P ............. B127
4165981 ..... CNMG1906126P TN30P ............. B127
4165982 ..... CNMG1906126P TN15M ............ B127
4165983 ..... CNMG1906126P TN30M ............ B127
4165984 ..... DNMG1104086P TN10P ............. B132
4165985 ..... DNMG1104086P TN20P ............. B132
4165986 ..... DNMG1104086P TN30M ............ B132
4165987 ..... DNMG1504046P TN10P ............. B132
4165988 ..... DNMG1504046P TN20P ............. B132
4165989 ..... DNMG1504046P TN15M ............ B132
4165990 ..... DNMG1504046P TN30M ............ B132
4165991 ..... DNMG1504086P TN10P ............. B132
4165992 ..... DNMG1504086P TN20P ............. B132
4165993 ..... DNMG1504086P TN30P ............. B132
4165994 ..... DNMG1504086P TN15M ............ B132
4165995 ..... DNMG1504086P TN30M ............ B132
4165996 ..... DNMG1504126P TN10P ............. B132
4165997 ..... DNMG1504126P TN20P ............. B132
4166171 ..... CNMG1204042P TN10P ............. B126
4166172 ..... CNMG1204042P TN20P ............. B126
4166242 ..... CCMT0602021P TN15M ............. B123
4166243 ..... CNMG1204042P TN20K ............. B126
4166244 ..... CNMG1204042P TN15M ............ B126
4166245 ..... CNMG1204042P TN30M ............ B126
4166246 ..... CNMG1204042P TN10U ............. B126
4166247 ..... CNMG1204042P TN15U ............. B126
4166248 ..... CNMG1204082P TN10P ............. B126
4166249 ..... CNMG1204082P TN20P ............. B126
4166250 ..... CNMG1204082P TN20K ............. B126
4166251 ..... CNMG1204082P TN15M ............ B126
4166252 ..... CNMG1204082P TN30M ............ B126
4166253 ..... CNMG1204082P TN10U ............. B126
4166254 ..... CNMG1204082P TN15U ............. B126
4166255 ..... CNMG1204122P TN10P ............. B126
4166256 ..... CNMG1204122P TN20P ............. B126
4166257 ..... CNMG1204122P TN20K ............. B126
4166258 ..... CNMG1204122P TN15M ............ B126
4166259 ..... CNMG1204122P TN10U ............. B126
4166260 ..... DNMG1504042P TN10P ............. B131
4166261 ..... DNMG1504042P TN20P ............. B131
4166262 ..... DNMG1504042P TN20K ............. B131
4166263 ..... DNMG1504042P TN15M ............ B131
4166264 ..... DNMG1504042P TN30M ............ B131
4166265 ..... DNMG1504042P TN10U ............. B131
4166266 ..... DNMG1504042P TN15U ............. B131
4166267 ..... DNMG1504082P TN10P ............. B131
4166269 ..... DNMG1504082P TN20P ............. B131
4166271 ..... DNMG1504082P TN20K ............. B131
4166273 ..... DNMG1504082P TN15M ............ B131
4166275 ..... DNMG1504082P TN30M ............ B131
4166277 ..... DNMG1504082P TN10U ............. B131
4166279 ..... DNMG1504082P TN15U ............. B131
4166281 ..... VNMG1604042P TN10P.............. B146
4166282 ..... VNMG1604042P TN20P.............. B146
4166283 ..... VNMG1604042P TN20K.............. B146
4166284 ..... VNMG1604042P TN15M ............. B146
4166285 ..... VNMG1604042P TN30M ............. B146
4166286 ..... VNMG1604042P TN10U ............. B146
4166287 ..... VNMG1604042P TN15U ............. B146
4166288 ..... VNMG1604082P TN10P.............. B146
4166289 ..... VNMG1604082P TN20P.............. B146
4166290 ..... VNMG1604082P TN20K.............. B146
4166291 ..... VNMG1604082P TN15M ............. B146
4166292 ..... VNMG1604082P TN10U ............. B146
4166293 ..... VNMG1604082P TN15U ............. B146
4166294 ..... WNMG0804042P TN10P ............ B148
4166295 ..... WNMG0804042P TN20P ............ B148
4166296 ..... WNMG0804042P TN20K ............ B148
4166297 ..... WNMG0804042P TN15M ........... B148
4166298 ..... WNMG0804042P TN30M ........... B148
4166299 ..... WNMG0804042P TN10U ............ B148
4166300 ..... WNMG0804042P TN15U ............ B148
4166301 ..... WNMG0804082P TN10P ............ B148
4166302 ..... WNMG0804082P TN20P ............ B148
4166303 ..... WNMG0804082P TN20K ............ B148
4166304 ..... WNMG0804082P TN15M ........... B148
4166305 ..... WNMG0804082P TN10U ............ B148
4166306 ..... WNMG0804082P TN15U ............ B148
4166323 ..... CCMT0602021P TN30M ............. B123
4166324 ..... CCMT0602021P TN10U .............. B123
4166325 ..... CCMT0602021P TN15U .............. B123
4166326 ..... CCMT0602041P TN10P .............. B123
4166327 ..... CCMT0602041P TN20P .............. B123
4166328 ..... CCMT0602041P TN20K .............. B123
4166329 ..... CCMT0602041P TN15M ............. B123
4166330 ..... CCMT0602041P TN30M ............. B123
4166331 ..... CCMT0602041P TN10U .............. B123
4166332 ..... CCMT0602041P TN15U .............. B123
4166333 ..... CCMT0602081P TN10P .............. B123
4166334 ..... CCMT0602081P TN20P .............. B123
4166335 ..... CCMT0602081P TN20K .............. B123
4166336 ..... CCMT0602081P TN15M ............. B123
4166337 ..... CCMT0602081P TN30M ............. B123
4166338 ..... CCMT0602081P TN10U .............. B123
4166339 ..... CCMT09T3021P TN10U .............. B123
4166340 ..... CCMT09T3021P TN15U .............. B123
4166341 ..... CCMT09T3041P TN10P .............. B123
4166342 ..... CCMT09T3041P TN20P .............. B123
4166343 ..... CCMT09T3041P TN20K .............. B123
4166344 ..... CCMT09T3041P TN15M ............. B123
Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 53 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRAND O b 28 2015 3 09 PM
Z54 widia.com
Index by Order Number
Order No. Catalogue No. Page(s)
4166345 ..... CCMT09T3041P TN30M ............. B123
4166346 ..... CCMT09T3041P TN10U .............. B123
4166347 ..... CCMT09T3041P TN15U .............. B123
4166348 ..... CCMT09T3081P TN10P .............. B123
4166349 ..... CCMT09T3081P TN20P .............. B123
4166350 ..... CCMT09T3081P TN20K .............. B123
4166351 ..... CCMT09T3081P TN15M ............. B123
4166352 ..... CCMT09T3081P TN30M ............. B123
4166353 ..... CCMT09T3081P TN10U .............. B123
4166354 ..... CCMT09T3081P TN15U .............. B123
4166355 ..... CCMT1204041P TN10P .............. B123
4166356 ..... CCMT1204041P TN20P .............. B123
4166357 ..... CCMT1204041P TN20K .............. B123
4166358 ..... CCMT1204041P TN15M ............. B123
4166359 ..... CCMT1204041P TN30M ............. B123
4166361 ..... DCMT1504081P TN20K .............. B129
4166362 ..... SCMT09T3041P TN10P .............. B134
4166386 ..... CNMG1204047N TN10P ............. B128
4166387 ..... CNMG1204047N TN20P ............. B128
4166388 ..... CNMG1204047N TN20K ............. B128
4166389 ..... CNMG1204087N TN10P ............. B128
4166390 ..... CNMG1204087N TN20P ............. B128
4166391 ..... CNMG1204087N TN30P ............. B128
4166392 ..... CNMG1204087N TN20K ............. B128
4166393 ..... SCMT09T3041P TN20P .............. B134
4166394 ..... SCMT09T3041P TN20K .............. B134
4166395 ..... SCMT09T3041P TN15M ............. B134
4166396 ..... SCMT09T3041P TN30M ............. B134
4166397 ..... SCMT09T3041P TN10U .............. B134
4166398 ..... SCMT09T3081P TN10P .............. B134
4166399 ..... SCMT09T3081P TN20P .............. B134
4166400 ..... SCMT09T3081P TN20K .............. B134
4166401 ..... SCMT09T3081P TN15M ............. B134
4166402 ..... SCMT09T3081P TN30M ............. B134
4166403 ..... SCMT09T3081P TN10U .............. B134
4166404 ..... SCMT1204041P TN10U .............. B134
4166405 ..... SCMT1204081P TN10P .............. B134
4166406 ..... SCMT1204081P TN20P .............. B134
4166407 ..... SCMT1204081P TN20K .............. B134
4166408 ..... SCMT1204081P TN15M ............. B134
4166409 ..... SCMT1204081P TN30M ............. B134
4166410 ..... SCMT1204081P TN10U .............. B134
4166411 ..... TCMT1102021P TN10P .............. B139
4166412 ..... TCMT1102021P TN20K .............. B139
4166413 ..... TCMT1102021P TN10U .............. B139
4166414 ..... TCMT1102041P TN10P .............. B139
4166415 ..... TCMT1102041P TN20P .............. B139
4166416 ..... TCMT1102041P TN20K .............. B139
4166417 ..... TCMT1102041P TN15M ............. B139
4166418 ..... TCMT1102041P TN30M ............. B139
4166419 ..... TCMT1102041P TN10U .............. B139
4166420 ..... TCMT1102081P TN10P .............. B139
4166421 ..... TCMT1102081P TN20P .............. B139
4166422 ..... TCMT1102081P TN20K .............. B139
4166423 ..... TCMT1102081P TN10U .............. B139
4166424 ..... TCMT16T3021P TN10U .............. B139
4166425 ..... TCMT16T3041P TN10P .............. B139
4166426 ..... TCMT16T3041P TN20P .............. B139
4166427 ..... TCMT16T3041P TN20K .............. B139
4166428 ..... TCMT16T3041P TN15M ............. B139
4166429 ..... TCMT16T3041P TN30M ............. B139
4166430 ..... TCMT16T3041P TN10U .............. B139
4166432 ..... DNMG1504127N TN30P ............. B133
4166433 ..... CNMG1204127N TN10P ............. B128
4166434 ..... CNMG1204127N TN20P ............. B128
4166435 ..... CNMG1204127N TN30P ............. B128
4166436 ..... CNMG1204127N TN20K ............. B128
4166437 ..... CNMG1204167N TN10P ............. B128
4166438 ..... CNMG1204167N TN20P ............. B128
4166439 ..... CNMG1204167N TN20K ............. B128
4166440 ..... CNMG1606127N TN10P ............. B128
4166441 ..... CNMG1606127N TN20P ............. B128
4166442 ..... CNMG1606127N TN30P ............. B128
4166443 ..... CNMG1606127N TN20K ............. B128
4166444 ..... CNMG1606167N TN10P ............. B128
4166445 ..... CNMG1606167N TN20P ............. B128
4166446 ..... CNMG1606167N TN20K ............. B128
4166447 ..... CNMG1906087N TN10P ............. B128
4166448 ..... CNMG1906087N TN20K ............. B128
4166449 ..... CNMG1906127N TN10P ............. B128
4166450 ..... CNMG1906127N TN20P ............. B128
4166451 ..... CNMG1906127N TN30P ............. B128
4166452 ..... CNMG1906127N TN20K ............. B128
4166453 ..... CNMG1906167N TN10P ............. B128
4166454 ..... CNMG1906167N TN20P ............. B128
4166455 ..... CNMG1906167N TN30P ............. B128
4166456 ..... CNMG1906167N TN20K ............. B128
4166457 ..... CNMG2509247N TN30P ............. B128
4166458 ..... DNMG1504047N TN10P ............. B133
4166459 ..... DNMG1504047N TN20P ............. B133
4166460 ..... DNMG1504087N TN10P ............. B133
4166461 ..... DNMG1504087N TN20P ............. B133
4166462 ..... DNMG1504087N TN30P ............. B133
4166463 ..... DNMG1504087N TN20K ............. B133
4166464 ..... DNMG1504127N TN10P ............. B133
4166465 ..... DNMG1504127N TN20P ............. B133
4166469 ..... TCMT16T3081P TN10P .............. B139
4166471 ..... TCMT16T3081P TN20P .............. B139
4166472 ..... TCMT16T3081P TN20K .............. B139
4166483 ..... DNMG1504127N TN20K ............. B133
4166484 ..... DNMG1506087N TN10P ............. B133
4166485 ..... DNMG1506087N TN20P ............. B133
4166486 ..... DNMG1506087N TN30P ............. B133
4166487 ..... DNMG1506087N TN20K ............. B133
4166488 ..... DNMG1506127N TN10P ............. B133
4166489 ..... DNMG1506127N TN20P ............. B133
4166490 ..... DNMG1506127N TN30P ............. B133
4166491 ..... DNMG1506127N TN20K ............. B133
4166492 ..... DNMG1906127N TN20P ............. B133
4166493 ..... DNMG1906127N TN30P ............. B133
4166494 ..... RNMG12047N TN20P ................. B133
4166495 ..... RNMG12047N TN20K ................. B133
4166496 ..... RNMG19067N TN10P ................. B133
4166497 ..... RNMG19067N TN20P ................. B133
4166498 ..... SNMG1204087N TN10P ............. B137
4166499 ..... SNMG1204087N TN20P ............. B137
4166500 ..... SNMG1204087N TN20K ............. B137
4166501 ..... SNMG1204127N TN10P ............. B137
4166502 ..... SNMG1204127N TN20P ............. B137
4166503 ..... SNMG1204127N TN30P ............. B137
4166504 ..... SNMG1204127N TN20K ............. B137
4166505 ..... SNMG1204167N TN10P ............. B137
4166506 ..... SNMG1204167N TN20P ............. B137
4166507 ..... SNMG1204167N TN30P ............. B137
4166508 ..... SNMG1204167N TN20K ............. B137
4166509 ..... SNMG1506127N TN20P ............. B137
4166510 ..... SNMG1506127N TN30P ............. B137
4166511 ..... SNMG1506127N TN20K ............. B137
4166512 ..... SNMG1506167N TN20P ............. B137
4166513 ..... SNMG1506167N TN30P ............. B137
4166514 ..... SNMG1506167N TN20K ............. B137
4166515 ..... SNMG1906127N TN20P ............. B137
4166516 ..... SNMG1906127N TN30P ............. B137
4166517 ..... SNMG1906127N TN20K ............. B137
4166518 ..... SNMG1906167N TN20P ............. B137
4166519 ..... SNMG1906167N TN30P ............. B137
4166520 ..... SNMG1906167N TN20K ............. B137
4166521 ..... TNMG1604047N TN20P ............. B143
4166522 ..... TNMG1604087N TN10P ............. B143
4166523 ..... TNMG1604087N TN20P ............. B143
4166524 ..... TNMG1604087N TN30P ............. B143
4166525 ..... TNMG1604087N TN20K ............. B143
4166526 ..... TNMG1604127N TN10P ............. B143
4166527 ..... TNMG1604127N TN20P ............. B143
4166528 ..... TNMG1604127N TN30P ............. B143
4166529 ..... TNMG1604127N TN20K ............. B143
4166530 ..... TNMG2204047N TN10P ............. B143
4166531 ..... TNMG2204047N TN20P ............. B143
4166532 ..... TNMG2204087N TN10P ............. B143
4166533 ..... TNMG2204087N TN20P ............. B143
4166534 ..... TNMG2204087N TN30P ............. B143
4166535 ..... TNMG2204087N TN20K ............. B143
4166536 ..... TNMG2204127N TN20P ............. B143
4166537 ..... TNMG2204127N TN30P ............. B143
4166538 ..... TNMG2204127N TN20K ............. B143
4166539 ..... TNMG2706127N TN10P ............. B143
4166540 ..... TNMG2706127N TN20P ............. B143
4166541 ..... TNMG2706127N TN30P ............. B143
4166542 ..... TNMG2706127N TN20K ............. B143
4166543 ..... TNMG3309247N TN10P ............. B143
4166544 ..... TNMG3309247N TN20P ............. B143
4166545 ..... TNMG3309247N TN30P ............. B143
4166546 ..... TNMG3309247N TN20K ............. B143
4166547 ..... WNMG0804087N TN10P ............ B149
4166548 ..... WNMG0804087N TN20P ............ B149
4166549 ..... WNMG0804087N TN30P ............ B149
4166550 ..... WNMG0804087N TN20K ............ B149
4166551 ..... WNMG0804127N TN10P ............ B149
4166552 ..... WNMG0804127N TN20P ............ B149
4166553 ..... WNMG0804127N TN30P ............ B149
4166554 ..... WNMG0804127N TN20K ............ B149
4166555 ..... WNMG0804167N TN20P ............ B149
4166556 ..... WNMG0804167N TN30P ............ B149
4166557 ..... WNMG0804167N TN20K ............ B149
4166558 ..... CCMT1204041P TN10U .............. B123
4166559 ..... CCMT1204081P TN10P .............. B123
4166560 ..... CCMT1204081P TN20P .............. B123
4166561 ..... CCMT1204081P TN20K .............. B123
4166562 ..... CCMT1204081P TN15M ............. B123
4166563 ..... TCMT16T3081P TN15M ............. B139
4166564 ..... TCMT16T3081P TN30M ............. B139
4166565 ..... TCMT16T3081P TN10U .............. B139
4166566 ..... TCMT16T3121P TN10U .............. B139
4166567 ..... TCMT2204081P TN10P .............. B139
4166568 ..... TCMT2204081P TN20P .............. B139
4166569 ..... TCMT2204081P TN20K .............. B139
4166570 ..... TCMT2204081P TN15M ............. B139
4166571 ..... TCMT2204081P TN30M ............. B139
4166572 ..... TCMT2204081P TN10U .............. B139
4166573 ..... VBMT1103021P TN10U .............. B144
4166574 ..... VBMT1103021P TN15U .............. B144
4166575 ..... VBMT1103041P TN10P .............. B144
4166576 ..... VBMT1103041P TN20P .............. B144
4166577 ..... VBMT1103041P TN20K .............. B144
4166578 ..... VBMT1103041P TN15M ............. B144
4166579 ..... VBMT1103041P TN30M ............. B144
4166580 ..... VBMT1103041P TN10U .............. B144
4166581 ..... VBMT1103041P TN15U .............. B144
4166582 ..... VBMT1103081P TN10P .............. B144
4166583 ..... VBMT1103081P TN20P .............. B144
4166584 ..... VBMT1103081P TN20K .............. B144
4166585 ..... VBMT1103081P TN15M ............. B144
4166586 ..... VBMT1103081P TN10U .............. B144
4166587 ..... VBMT1604021P TN10P .............. B144
4166588 ..... VBMT1604021P TN20K .............. B144
4166589 ..... VBMT1604021P TN30M ............. B144
4166590 ..... VBMT1604021P TN10U .............. B144
4166591 ..... VBMT1604021P TN15U .............. B144
4166592 ..... VBMT1604041P TN10P .............. B144
4166593 ..... VBMT1604041P TN20P .............. B144
4166594 ..... VBMT1604041P TN20K .............. B144
4166595 ..... VBMT1604041P TN15M ............. B144
4166596 ..... VBMT1604041P TN30M ............. B144
4166597 ..... VBMT1604041P TN10U .............. B144
4166598 ..... VBMT1604041P TN15U .............. B144
4166599 ..... VBMT1604081P TN10P .............. B144
4166600 ..... VBMT1604081P TN20P .............. B144
4166601 ..... VBMT1604081P TN20K .............. B144
4166602 ..... VBMT1604081P TN15M ............. B144
4166603 ..... VBMT1604081P TN30M ............. B144
4166604 ..... VBMT1604081P TN10U .............. B144
4166605 ..... VBMT1604081P TN15U .............. B144
4166623 ..... CCMT1204081P TN30M ............. B123
4166624 ..... CCMT1204081P TN10U .............. B123
4166625 ..... DCMT0702021P TN10U .............. B129
4166626 ..... DCMT0702021P TN15U .............. B129
4166627 ..... DCMT0702041P TN10P .............. B129
4166628 ..... DCMT0702041P TN20P .............. B129
4166629 ..... DCMT0702041P TN20K .............. B129
4166630 ..... DCMT0702041P TN15M ............. B129
4166631 ..... DCMT0702041P TN30M ............. B129
4166632 ..... DCMT0702041P TN10U .............. B129
4166633 ..... DCMT0702041P TN15U .............. B129
4166634 ..... DCMT11T3021P TN10U .............. B129
4166635 ..... DCMT11T3021P TN15U .............. B129
4166636 ..... DCMT11T3041P TN10P .............. B129
4166637 ..... DCMT11T3041P TN20P .............. B129
4166638 ..... DCMT11T3041P TN20K .............. B129
4166639 ..... DCMT11T3041P TN15M ............. B129
4166640 ..... DCMT11T3041P TN30M ............. B129
4166641 ..... DCMT11T3041P TN10U .............. B129
4166642 ..... DCMT11T3041P TN15U .............. B129
4166643 ..... DCMT11T3081P TN10P .............. B129
4166644 ..... DCMT11T3081P TN20P .............. B129
4166645 ..... DCMT11T3081P TN20K .............. B129
4166646 ..... DCMT11T3081P TN15M ............. B129
4166647 ..... DCMT11T3081P TN30M ............. B129
4166648 ..... DCMT11T3081P TN10U .............. B129
4166649 ..... DCMT11T3121P TN10P .............. B129
4166650 ..... DCMT11T3121P TN20K .............. B129
4166651 ..... DCMT11T3121P TN15M ............. B129
4166652 ..... DCMT11T3121P TN10U .............. B129
4166653 ..... DCMT1504041P TN10P .............. B129
4166654 ..... DCMT1504041P TN20P .............. B129
4166655 ..... DCMT1504041P TN20K .............. B129
4166656 ..... DCMT1504081P TN10P .............. B129
4166657 ..... DCMT1504081P TN20P .............. B129
4166765 ..... DNMG1504126P TN15M ............ B132
4166766 ..... DNMG1504126P TN30M ............ B132
4166767 ..... DNMG1506046P TN10P ............. B132
4166768 ..... DNMG1506046P TN20P ............. B132
4166769 ..... DNMG1506046P TN15M ............ B132
4166770 ..... DNMG1506046P TN30M ............ B132
4166771 ..... DNMG1506086P TN10P ............. B132
Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 54 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRANDO b 28 20153 09PM
Z55
widia.com
Index by Order Number
Order No. Catalogue No. Page(s)
4166772 ..... DNMG1506086P TN20P ............. B132
4166793 ..... DNMG1506086P TN30P ............. B132
4166794 ..... DNMG1506086P TN15M ............ B132
4166795 ..... DNMG1506086P TN30M ............ B132
4166796 ..... DNMG1506126P TN10P ............. B132
4166797 ..... DNMG1506126P TN20P ............. B132
4166798 ..... DNMG1506126P TN30P ............. B132
4166799 ..... DNMG1506126P TN15M ............ B132
4166800 ..... DNMG1506126P TN30M ............ B132
4166801 ..... DNMG1906126P TN30P ............. B132
4166802 ..... SNMG0903086P TN10P ............. B136
4166803 ..... SNMG0903086P TN20P ............. B136
4166804 ..... SNMG1204046P TN10P ............. B136
4166805 ..... SNMG1204046P TN20P ............. B136
4166806 ..... SNMG1204046P TN15M............. B136
4166807 ..... SNMG1204046P TN30M............. B136
4166808 ..... SNMG1204086P TN10P ............. B136
4166809 ..... SNMG1204086P TN20P ............. B136
4166810 ..... SNMG1204086P TN30P ............. B136
4166811 ..... SNMG1204086P TN15M............. B136
4166812 ..... SNMG1204086P TN30M............. B136
4166813 ..... SNMG1204126P TN10P ............. B136
4166814 ..... SNMG1204126P TN20P ............. B136
4166815 ..... SNMG1204126P TN30P ............. B136
4166816 ..... SNMG1204126P TN15M............. B136
4166817 ..... SNMG1204126P TN30M............. B136
4166818 ..... SNMG1906126P TN20P ............. B136
4166819 ..... SNMG1906126P TN30P ............. B136
4166820 ..... SNMG1906126P TN15M............. B136
4166821 ..... SNMG1906126P TN30M............. B136
4166822 ..... TNMG1604046P TN10P .............. B142
4166823 ..... TNMG1604046P TN20P .............. B142
4166824 ..... TNMG1604046P TN15M ............. B142
4166825 ..... DNMG1506042P TN10P ............. B131
4166826 ..... DNMG1506042P TN20P ............. B131
4166827 ..... DNMG1506042P TN20K ............. B131
4166828 ..... DNMG1506042P TN15M ............ B131
4166829 ..... DNMG1506042P TN10U ............. B131
4166830 ..... DNMG1506042P TN15U ............. B131
4166831 ..... DNMG1506082P TN10P ............. B131
4166832 ..... DNMG1506082P TN20P ............. B131
4166843 ..... DNMG1506082P TN20K ............. B131
4166844 ..... DNMG1506082P TN15M ............ B131
4166845 ..... DNMG1506082P TN10U ............. B131
4166846 ..... DNMG1506082P TN15U ............. B131
4166847 ..... DNMG1506122P TN10P ............. B131
4166848 ..... DNMG1506122P TN20P ............. B131
4166849 ..... DNMG1506122P TN20K ............. B131
4166850 ..... DNMG1506122P TN15M ............ B131
4166851 ..... DNMG1506122P TN30M ............ B131
4166852 ..... DNMG1506122P TN10U ............. B131
4166853 ..... SNMG0903082P TN10P ............. B135
4166854 ..... SNMG0903082P TN20P ............. B135
4166855 ..... SNMG0903082P TN20K ............. B135
4166856 ..... SNMG0903082P TN10U ............. B135
4166857 ..... SNMG1204082P TN10P ............. B135
4166858 ..... SNMG1204082P TN20P ............. B135
4166859 ..... SNMG1204082P TN20K ............. B135
4166860 ..... SNMG1204082P TN15M............. B135
4166861 ..... SNMG1204082P TN10U ............. B135
4166862 ..... SNMG1204082P TN15U ............. B135
4166863 ..... TNMG1604042P TN10P .............. B141
4166864 ..... TNMG1604042P TN20P .............. B141
4166865 ..... TNMG1604042P TN20K .............. B141
4166866 ..... TNMG1604042P TN15M ............. B141
4166867 ..... TNMG1604042P TN30M ............. B141
4166868 ..... TNMG1604042P TN10U.............. B141
4166869 ..... TNMG1604042P TN15U.............. B141
4166870 ..... TNMG1604082P TN10P .............. B141
4166871 ..... TNMG1604082P TN20P .............. B141
4166872 ..... TNMG1604082P TN20K .............. B141
4166873 ..... TNMG1604082P TN15M ............. B141
4166874 ..... TNMG1604082P TN10U.............. B141
4166875 ..... TNMG1604082P TN15U.............. B141
4166876 ..... TNMG1604122P TN10P .............. B141
4166877 ..... TNMG1604122P TN20P .............. B141
4166878 ..... TNMG1604122P TN20K .............. B141
4166879 ..... TNMG1604122P TN15M ............. B141
4166880 ..... TNMG1604122P TN30M ............. B141
4166881 ..... TNMG1604122P TN10U.............. B141
4166882 ..... TNMG2204082P TN10P .............. B141
4166883 ..... TNMG2204082P TN20P .............. B141
4166884 ..... TNMG2204082P TN20K .............. B141
4166885 ..... TNMG2204082P TN15M ............. B141
4166886 ..... TNMG2204082P TN10U.............. B141
4166887 ..... TNMG2204082P TN15U.............. B141
4167086 ..... TNMG1604046P TN30M ............. B142
4167087 ..... TNMG1604086P TN10P .............. B142
4167088 ..... TNMG1604086P TN20P .............. B142
4167089 ..... TNMG1604086P TN30P .............. B142
4167090 ..... TNMG1604086P TN15M ............. B142
4167091 ..... TNMG1604086P TN30M ............. B142
4167092 ..... TNMG1604126P TN10P .............. B142
4167113 ..... TNMG1604126P TN20P .............. B142
4167114 ..... TNMG1604126P TN15M ............. B142
4167115 ..... TNMG1604126P TN30M ............. B142
4167116 ..... TNMG2204046P TN10P .............. B142
4167117 ..... TNMG2204046P TN20P .............. B142
4167118 ..... TNMG2204046P TN15M ............. B142
4167119 ..... TNMG2204046P TN30M ............. B142
4167120 ..... TNMG2204086P TN10P .............. B142
4167121 ..... TNMG2204086P TN20P .............. B142
4167122 ..... TNMG2204086P TN30P .............. B142
4167123 ..... TNMG2204086P TN15M ............. B142
4167124 ..... TNMG2204086P TN30M ............. B142
4167125 ..... VNMG1604086P TN10P.............. B147
4167126 ..... VNMG1604086P TN20P.............. B147
4167127 ..... VNMG1604086P TN15M ............. B147
4167128 ..... VNMG1604086P TN30M ............. B147
4167129 ..... WNMG0604086P TN10P ............ B149
4167130 ..... WNMG0604086P TN20P ............ B149
4167131 ..... WNMG0604086P TN15M ........... B149
4167132 ..... WNMG0604086P TN30M ........... B149
4167133 ..... WNMG0804086P TN10P ............ B149
4167134 ..... WNMG0804086P TN20P ............ B149
4167135 ..... WNMG0804086P TN30P ............ B149
4167136 ..... WNMG0804086P TN15M ........... B149
4167137 ..... WNMG0804086P TN30M ........... B149
4167138 ..... WNMG0804126P TN10P ............ B149
4167139 ..... WNMG0804126P TN20P ............ B149
4167140 ..... WNMG0804126P TN30P ............ B149
4167141 ..... WNMG0804126P TN15M ........... B149
4167142 ..... WNMG0804126P TN30M ........... B149
4167196 ..... TDS202A10000 WP20PD ..............T53
4167198 ..... TDS202A10100 WP20PD ..............T53
4167199 ..... TDS202A10200 WP20PD ..............T53
4167200 ..... TDS202A10300 WP20PD ..............T53
4167201 ..... TDS202A10320 WP20PD ..............T53
4167202 ..... TDS202A10400 WP20PD ..............T53
4167203 ..... TDS202A10500 WP20PD ..............T53
4167204 ..... TDS202A10600 WP20PD ..............T53
4167205 ..... TDS202A10700 WP20PD ..............T53
4167206 ..... TDS202A10716 WP20PD ..............T53
4167207 ..... TDS202A10800 WP20PD ..............T53
4167208 ..... TDS202A10900 WP20PD ..............T53
4167209 ..... TDS202A11000 WP20PD ..............T53
4167210 ..... TDS202A11100 WP20PD ..............T53
4167211 ..... TDS202A11113 WP20PD ..............T53
4167212 ..... TDS202A11200 WP20PD ..............T53
4167213 ..... TDS202A11300 WP20PD ..............T53
4167214 ..... TDS202A11400 WP20PD ..............T53
4167215 ..... TDS202A11500 WP20PD ..............T53
4167216 ..... TDS202A11509 WP20PD ..............T53
4167217 ..... TDS202A11600 WP20PD ..............T53
4167218 ..... TDS202A11700 WP20PD ..............T53
4167219 ..... TDS202A11800 WP20PD ..............T53
4167220 ..... TDS202A11900 WP20PD ..............T53
4167221 ..... TDS202A11908 WP20PD ..............T53
4167222 ..... TDS202A12000 WP20PD ..............T53
4167223 ..... TDS202A12100 WP20PD ..............T53
4167224 ..... TDS202A12200 WP20PD ..............T53
4167225 ..... TDS202A12300 WP20PD ..............T53
4167226 ..... TDS202A12304 WP20PD ..............T53
4167227 ..... TDS202A12400 WP20PD ..............T53
4167228 ..... TDS202A12500 WP20PD ..............T53
4167229 ..... TDS202A12600 WP20PD ..............T53
4167230 ..... TDS202A12700 WP20PD ..............T53
4167231 ..... TDS202A12800 WP20PD ..............T53
4167232 ..... TDS202A12900 WP20PD ..............T53
4167233 ..... TDS202A13000 WP20PD ..............T53
4167234 ..... TDS202A13096 WP20PD ..............T53
4167235 ..... TDS202A13100 WP20PD ..............T53
4167236 ..... TDS202A13200 WP20PD ..............T54
4167237 ..... TDS202A13300 WP20PD ..............T54
4167238 ..... TDS202A13400 WP20PD ..............T54
4167239 ..... TDS202A13500 WP20PD ..............T54
4167240 ..... TDS202A13600 WP20PD ..............T54
4167241 ..... TDS202A13700 WP20PD ..............T54
4167242 ..... TDS202A13800 WP20PD ..............T54
4167243 ..... TDS202A13891 WP20PD ..............T54
4167244 ..... TDS202A13900 WP20PD ..............T54
4167245 ..... TDS202A14000 WP20PD ..............T54
4167246 ..... TDS202A14100 WP20PD ..............T54
4167247 ..... TDS202A14200 WP20PD ..............T54
4167248 ..... TDS202A14288 WP20PD ..............T54
4167249 ..... TDS202A14300 WP20PD ..............T54
4167250 ..... TDS202A14400 WP20PD ..............T54
4167251 ..... TDS202A14500 WP20PD ..............T54
4167252 ..... TDS202A14600 WP20PD ..............T54
4167253 ..... TDS202A14684 WP20PD ..............T54
4167254 ..... TDS202A14700 WP20PD ..............T54
4167255 ..... TDS202A14800 WP20PD ..............T54
4167256 ..... TDS202A14900 WP20PD ..............T54
4167257 ..... TDS202A15000 WP20PD ..............T54
4167258 ..... TDS202A15083 WP20PD ..............T54
4167259 ..... TDS202A15100 WP20PD ..............T54
4167260 ..... TDS202A15200 WP20PD ..............T54
4167261 ..... TDS202A15300 WP20PD ..............T54
4167262 ..... TDS202A15400 WP20PD ..............T54
4167263 ..... TDS202A15479 WP20PD ..............T54
4167264 ..... TDS202A15500 WP20PD ..............T54
4167265 ..... TDS202A15600 WP20PD ..............T54
4167266 ..... TDS202A15700 WP20PD ..............T54
4167267 ..... TDS202A15800 WP20PD ..............T54
4167268 ..... TDS202A15875 WP20PD ..............T54
4167269 ..... TDS202A15900 WP20PD ..............T54
4167270 ..... TDS202A16000 WP20PD ..............T54
4167271 ..... TDS202A16100 WP20PD ..............T54
4167272 ..... TDS202A16200 WP20PD ..............T54
4167273 ..... TDS202A16271 WP20PD ..............T54
4167274 ..... TDS202A16300 WP20PD ..............T54
4167275 ..... TDS202A16400 WP20PD ..............T54
4167276 ..... TDS202A16500 WP20PD ..............T55
4167277 ..... TDS202A16600 WP20PD ..............T55
4167278 ..... TDS202A16670 WP20PD ..............T55
4167279 ..... TDS202A16700 WP20PD ..............T55
4167280 ..... TDS202A16800 WP20PD ..............T55
4167281 ..... TDS202A16900 WP20PD ..............T55
4167282 ..... TDS202A17000 WP20PD ..............T55
4167283 ..... TDS202A17100 WP20PD ..............T55
4167284 ..... TDS202A17200 WP20PD ..............T55
4167285 ..... TDS202A17300 WP20PD ..............T55
4167286 ..... TDS202A17400 WP20PD ..............T55
4167287 ..... TDS202A17463 WP20PD ..............T55
4167288 ..... TDS202A17500 WP20PD ..............T55
4167289 ..... TDS202A17600 WP20PD ..............T55
4167290 ..... TDS202A17700 WP20PD ..............T55
4167291 ..... TDS202A17800 WP20PD ..............T55
4167292 ..... TDS202A17859 WP20PD ..............T55
4167293 ..... TDS202A17900 WP20PD ..............T55
4168738 ..... CCMT060204FP WM15CT ............ B31
4168739 ..... CCMT060208FP WM15CT ............ B31
4168740 ..... CCMT09T304FP WM15CT ............ B31
4168741 ..... CCMT09T308FP WM15CT ............ B31
4168742 ..... CCMT120404FP WM15CT ............ B31
4168763 ..... CCMT120408FP WM15CT ............ B31
4168764 ..... DCMT070204FP WM15CT ............ B48
4168765 ..... DCMT11T304FP WM15CT ............ B48
4168766 ..... DCMT11T308FP WM15CT ............ B48
4168767 ..... SCMT09T304FP WM15CT ............ B68
4168768 ..... SCMT09T308FP WM15CT ............ B68
4168769 ..... SCMT120408FP WM15CT ............ B68
4168770 ..... TCMT110204FP WM15CT ............ B82
4168771 ..... TCMT110208FP WM15CT ............ B82
4168772 ..... TCMT16T304FP WM15CT............. B82
4168773 ..... TCMT16T308FP WM15CT............. B82
4168774 ..... VBMT110304FP WM15CT ............ B94
4168775 ..... VBMT110308FP WM15CT ............ B94
4168776 ..... VBMT160404FP WM15CT ............ B94
4168777 ..... VBMT160408FP WM15CT ............ B94
4168778 ..... CCMT060202FP WM25CT ............ B31
4168779 ..... CCMT060204FP WM25CT ............ B31
4168780 ..... CCMT060208FP WM25CT ............ B31
4168781 ..... CCMT09T302FP WM25CT ............ B31
4168782 ..... CCMT09T304FP WM25CT ............ B31
4168783 ..... CCMT09T308FP WM25CT ............ B31
4168784 ..... CCMT120404FP WM25CT ............ B31
4168785 ..... CCMT120408FP WM25CT ............ B31
4168786 ..... CCMT120412FP WM25CT ............ B31
4168787 ..... DCMT070202FP WM25CT ............ B48
4168788 ..... DCMT070204FP WM25CT ............ B48
4168789 ..... DCMT070208FP WM25CT ............ B48
4168790 ..... DCMT11T302FP WM25CT ............ B48
4168791 ..... DCMT11T304FP WM25CT ............ B48
4168792 ..... DCMT11T308FP WM25CT ............ B48
4168793 ..... DCMT150404FP WM25CT ............ B48
4168794 ..... DCMT150408FP WM25CT ............ B48
4168795 ..... SCMT09T304FP WM25CT ............ B68
4168796 ..... SCMT09T308FP WM25CT ............ B68
4168797 ..... SCMT120404FP WM25CT ............ B68
4168798 ..... SCMT120408FP WM25CT ............ B68
4168799 ..... SCMT120412FP WM25CT ............ B68
4168800 ..... TCMT110202FP WM25CT ............ B82
4168801 ..... TCMT110204FP WM25CT ............ B82
Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 55 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRAND O b 28 2015 3 09 PM
Z56 widia.com
Index by Order Number
Order No. Catalogue No. Page(s)
4168802 ..... TCMT110208FP WM25CT ............ B82
4168803 ..... TCMT16T304FP WM25CT............. B82
4168804 ..... TCMT16T308FP WM25CT............. B82
4168805 ..... TCMT16T312FP WM25CT............. B82
4168806 ..... TCMT220408FP WM25CT ............ B82
4168807 ..... VBMT110304FP WM25CT ............ B94
4168808 ..... VBMT110308FP WM25CT ............ B94
4168809 ..... VBMT160402FP WM25CT ............ B94
4168810 ..... VBMT160404FP WM25CT ............ B94
4168811 ..... VBMT160408FP WM25CT ............ B94
4168812 ..... CPMT060204FP WM15CT ............ B46
4168813 ..... CPMT060208FP WM15CT ............ B46
4168814 ..... CPMT09T304FP WM15CT ............ B46
4168815 ..... CPMT09T308FP WM15CT ............ B46
4168816 ..... DPMT070204FP WM15CT ............ B63
4168817 ..... DPMT11T304FP WM15CT ............ B63
4168818 ..... TPMT090208FP WM15CT............. B92
4168819 ..... TPMT110204FP WM15CT............. B92
4168820 ..... TPMT110208FP WM15CT............. B92
4168821 ..... WPMT06T304FP WM15CT ......... B105
4168822 ..... CPMT060202FP WM25CT ............ B46
4168823 ..... CPMT060204FP WM25CT ............ B46
4168824 ..... CPMT060208FP WM25CT ............ B46
4168825 ..... CPMT09T302FP WM25CT ............ B46
4168826 ..... CPMT09T304FP WM25CT ............ B46
4168827 ..... CPMT09T308FP WM25CT ............ B46
4168828 ..... DPMT070204FP WM25CT ............ B63
4168829 ..... DPMT11T304FP WM25CT ............ B63
4168830 ..... DPMT11T308FP WM25CT ............ B63
4168831 ..... SPMT09T304FP WM25CT............. B79
4168832 ..... SPMT09T308FP WM25CT............. B79
4168833 ..... TPMT090208FP WM25CT............. B92
4168834 ..... TPMT110204FP WM25CT............. B92
4168835 ..... TPMT110208FP WM25CT............. B92
4168836 ..... TPMT16T304FP WM25CT ............. B92
4168837 ..... TPMT16T308FP WM25CT ............. B92
4168838 ..... TPMT16T312FP WM25CT ............. B92
4168839 ..... WPMT06T304FP WM25CT ......... B105
4168840 ..... WPMT06T308FP WM25CT ......... B105
4168841 ..... WPMTS3T104FP WM25CT ......... B105
4168893 ..... CCMT060204MP WM15CT ........... B32
4168894 ..... CCMT09T304MP WM15CT ........... B32
4168895 ..... CCMT09T308MP WM15CT ........... B32
4168896 ..... CCMT120408MP WM15CT ........... B32
4168897 ..... CCMT120412MP WM15CT ........... B32
4168898 ..... DCMT11T308MP WM15CT ........... B49
4168899 ..... SCMT09T304MP WM15CT ........... B69
4168900 ..... SCMT09T308MP WM15CT ........... B69
4168901 ..... SCMT120404MP WM15CT ........... B69
4168902 ..... SCMT120408MP WM15CT ........... B69
4168903 ..... SCMT120412MP WM15CT ........... B69
4168904 ..... TCMT16T304MP WM15CT ........... B82
4168905 ..... TCMT16T308MP WM15CT ........... B82
4168906 ..... CCMT060204MP WM25CT ........... B32
4168907 ..... CCMT09T304MP WM25CT ........... B32
4168908 ..... CCMT09T308MP WM25CT ........... B32
4168909 ..... CCMT09T312MP WM25CT ........... B32
4168910 ..... CCMT120408MP WM25CT ........... B32
4168911 ..... CCMT120412MP WM25CT ........... B32
4168912 ..... DCMT11T308MP WM25CT ........... B49
4168913 ..... SCMT09T304MP WM25CT ........... B69
4168914 ..... SCMT09T308MP WM25CT ........... B69
4168915 ..... SCMT120404MP WM25CT ........... B69
4168916 ..... SCMT120408MP WM25CT ........... B69
4168917 ..... SCMT120412MP WM25CT ........... B69
4168918 ..... TCMT16T304MP WM25CT ........... B82
4168919 ..... TCMT16T308MP WM25CT ........... B82
4168920 ..... TCMT16T312MP WM25CT ........... B82
4168921 ..... VBMT160404MP WM25CT ........... B95
4168922 ..... VBMT160408MP WM25CT ........... B95
4168923 ..... CPMT09T308MP WM15CT ........... B46
4168924 ..... CPMT09T312MP WM15CT ........... B46
4168925 ..... SPMT09T308MP WM15CT ........... B79
4168926 ..... CPMT09T308MP WM25CT ........... B46
4169353 ..... CNMG120404UF WM15CT ........... B42
4169354 ..... CNMG120408UF WM15CT ........... B42
4169355 ..... CNMG120412UF WM15CT ........... B42
4169356 ..... DNMG110404UF WM15CT ........... B60
4169357 ..... DNMG110408UF WM15CT ........... B60
4169358 ..... DNMG150404UF WM15CT ........... B60
4169359 ..... DNMG150408UF WM15CT ........... B60
4169360 ..... DNMG150412UF WM15CT ........... B60
4169361 ..... DNMG150604UF WM15CT ........... B60
4169362 ..... DNMG150608UF WM15CT ........... B60
4169363 ..... DNMG150612UF WM15CT ........... B60
4169364 ..... SNMG120404UF WM15CT ............ B74
4169365 ..... SNMG120408UF WM15CT ............ B74
4169366 ..... SNMG120412UF WM15CT ............ B74
4169367 ..... TNMG160404UF WM15CT ............ B88
4169368 ..... TNMG160408UF WM15CT ............ B88
4169369 ..... TNMG160412UF WM15CT ............ B88
4169370 ..... TNMG220404UF WM15CT ............ B88
4169371 ..... TNMG220408UF WM15CT ............ B88
4169372 ..... VNMG160404UF WM15CT ............ B98
4169373 ..... VNMG160408UF WM15CT ............ B98
4169374 ..... WNMG060404UF WM15CT......... B103
4169375 ..... WNMG060408UF WM15CT......... B103
4169376 ..... WNMG080404UF WM15CT......... B103
4169377 ..... WNMG080408UF WM15CT......... B103
4169378 ..... WNMG080412UF WM15CT......... B103
4169379 ..... CNMG120404UF WM25CT ........... B42
4169380 ..... CNMG120408UF WM25CT ........... B42
4169381 ..... CNMG120412UF WM25CT ........... B42
4169382 ..... DNMG110404UF WM25CT ........... B60
4169383 ..... DNMG110408UF WM25CT ........... B60
4169384 ..... DNMG150404UF WM25CT ........... B60
4169385 ..... DNMG150408UF WM25CT ........... B60
4169386 ..... DNMG150412UF WM25CT ........... B60
4169387 ..... DNMG150604UF WM25CT ........... B60
4169388 ..... DNMG150608UF WM25CT ........... B60
4169389 ..... DNMG150612UF WM25CT ........... B60
4169390 ..... SNMG120404UF WM25CT ............ B74
4169391 ..... SNMG120408UF WM25CT ............ B74
4169392 ..... SNMG120412UF WM25CT ............ B74
4169393 ..... TNMG160404UF WM25CT ............ B88
4169394 ..... TNMG160408UF WM25CT ............ B88
4169395 ..... TNMG160412UF WM25CT ............ B88
4169396 ..... TNMG220404UF WM25CT ............ B88
4169397 ..... TNMG220408UF WM25CT ............ B88
4169398 ..... VNMG160404UF WM25CT ............ B98
4169399 ..... VNMG160408UF WM25CT ............ B98
4169400 ..... WNMG060404UF WM25CT......... B103
4169401 ..... WNMG060408UF WM25CT......... B103
4169402 ..... WNMG080404UF WM25CT......... B103
4169403 ..... WNMG080408UF WM25CT......... B103
4169404 ..... WNMG080412UF WM25CT......... B103
4169406 ..... CNMG120404UR WM15CT ........... B43
4169407 ..... CNMG120408UR WM15CT ........... B43
4169408 ..... CNMG120412UR WM15CT ........... B43
4169409 ..... CNMG120416UR WM15CT ........... B43
4169410 ..... CNMG160608UR WM15CT ........... B43
4169411 ..... CNMG160612UR WM15CT ........... B43
4169412 ..... CNMG190612UR WM15CT ........... B43
4169423 ..... CNMG190616UR WM15CT ........... B43
4169424 ..... DNMG110408UR WM15CT ........... B62
4169425 ..... DNMG110412UR WM15CT ........... B62
4169426 ..... DNMG150408UR WM15CT ........... B62
4169427 ..... DNMG150608UR WM15CT ........... B62
4169428 ..... DNMG150612UR WM15CT ........... B62
4169429 ..... SNMG120408UR WM15CT ........... B75
4169430 ..... SNMG120412UR WM15CT ........... B75
4169431 ..... SNMG150612UR WM15CT ........... B75
4169432 ..... SNMG150616UR WM15CT ........... B75
4169433 ..... SNMG190616UR WM15CT ........... B75
4169434 ..... TNMG160408UR WM15CT ........... B89
4169435 ..... TNMG220408UR WM15CT ........... B89
4169436 ..... TNMG220412UR WM15CT ........... B89
4169437 ..... TNMG270612UR WM15CT ........... B89
4169438 ..... TNMG270616UR WM15CT ........... B89
4169439 ..... VNMG160408UR WM15CT ........... B99
4169440 ..... VNMG160412UR WM15CT ........... B99
4169441 ..... WNMG060408UR WM15CT ........ B104
4169442 ..... WNMG080408UR WM15CT ........ B104
4169443 ..... WNMG080412UR WM15CT ........ B104
4169444 ..... CNMG120404UR WM25CT ........... B43
4169445 ..... CNMG120408UR WM25CT ........... B43
4169446 ..... CNMG120412UR WM25CT ........... B43
4169447 ..... CNMG120416UR WM25CT ........... B43
4169448 ..... CNMG160608UR WM25CT ........... B43
4169449 ..... CNMG160612UR WM25CT ........... B43
4169450 ..... CNMG160616UR WM25CT ........... B43
4169451 ..... CNMG190612UR WM25CT ........... B43
4169452 ..... CNMG190616UR WM25CT ........... B43
4169453 ..... DNMG110408UR WM25CT ........... B62
4169454 ..... DNMG150408UR WM25CT ........... B62
4169455 ..... DNMG150412UR WM25CT ........... B62
4169456 ..... DNMG150608UR WM25CT ........... B62
4169457 ..... DNMG150612UR WM25CT ........... B62
4169458 ..... SNMG120408UR WM25CT ........... B75
4169459 ..... SNMG120412UR WM25CT ........... B75
4169460 ..... SNMG120416UR WM25CT ........... B75
4169461 ..... SNMG150612UR WM25CT ........... B75
4169462 ..... SNMG150616UR WM25CT ........... B75
4169463 ..... SNMG190612UR WM25CT ........... B75
4169464 ..... SNMG190616UR WM25CT ........... B75
4169465 ..... TNMG160408UR WM25CT ........... B89
4169466 ..... TNMG160412UR WM25CT ........... B89
4169467 ..... TNMG160416UR WM25CT ........... B89
4169468 ..... TNMG220408UR WM25CT ........... B89
4169469 ..... TNMG220412UR WM25CT ........... B89
4169470 ..... TNMG220416UR WM25CT ........... B89
4169471 ..... TNMG270612UR WM25CT ........... B89
4169472 ..... TNMG270616UR WM25CT ........... B89
4169473 ..... VNMG160408UR WM25CT ........... B99
4169474 ..... VNMG160412UR WM25CT ........... B99
4169475 ..... WNMG060408UR WM25CT ........ B104
4169476 ..... WNMG080408UR WM25CT ........ B104
4169477 ..... WNMG080412UR WM25CT ........ B104
4169478 ..... WNMG080416UR WM25CT ........ B104
4169479 ..... CNMG120404UR WM35CT ........... B43
4169480 ..... CNMG120408UR WM35CT ........... B43
4169481 ..... CNMG120412UR WM35CT ........... B43
4169482 ..... CNMG120416UR WM35CT ........... B43
4169483 ..... CNMG160608UR WM35CT ........... B43
4169484 ..... CNMG160612UR WM35CT ........... B43
4169485 ..... CNMG160616UR WM35CT ........... B43
4169486 ..... CNMG190612UR WM35CT ........... B43
4169487 ..... CNMG190616UR WM35CT ........... B43
4169488 ..... DNMG110408UR WM35CT ........... B62
4169489 ..... DNMG150408UR WM35CT ........... B62
4169490 ..... DNMG150412UR WM35CT ........... B62
4169491 ..... DNMG150416UR WM35CT ........... B62
4169492 ..... DNMG150608UR WM35CT ........... B62
4169493 ..... DNMG150612UR WM35CT ........... B62
4169494 ..... DNMG150616UR WM35CT ........... B62
4169495 ..... SNMG120408UR WM35CT ........... B75
4169496 ..... SNMG120412UR WM35CT ........... B75
4169497 ..... SNMG120416UR WM35CT ........... B75
4169498 ..... SNMG150612UR WM35CT ........... B75
4169499 ..... SNMG150616UR WM35CT ........... B75
4169500 ..... SNMG190612UR WM35CT ........... B75
4169501 ..... SNMG190616UR WM35CT ........... B75
4169502 ..... TNMG160412UR WM35CT ........... B89
4169503 ..... TNMG220408UR WM35CT ........... B89
4169504 ..... TNMG220412UR WM35CT ........... B89
4169505 ..... TNMG220416UR WM35CT ........... B89
4169506 ..... TNMG270612UR WM35CT ........... B89
4169507 ..... TNMG270616UR WM35CT ........... B89
4169508 ..... VNMG160408UR WM35CT ........... B99
4169509 ..... WNMG080408UR WM35CT ........ B104
4169510 ..... WNMG080412UR WM35CT ........ B104
4169511 ..... WNMG080416UR WM35CT ........ B104
4169554 ..... WMTS205M2U02PT WP10CT ........E18
4169555 ..... WMTS205M2U02PT WP25CT ........E18
4169556 ..... WMTS305M3U03PT WP10CT ........E18
4169557 ..... WMTS305M3U03PT WP25CT ........E18
4169558 ..... WMTS305M3U06PT WP10CT ........E18
4169559 ..... WMTS305M3U06PT WP25CT ........E18
4169560 ..... WMTS405M4U03PT WP10CT ........E18
4169561 ..... WMTS405M4U03PT WP25CT ........E18
4169562 ..... WMTS405M4U06PT WP10CT ........E18
4169563 ..... WMTS405M4U06PT WP25CT ........E18
4169564 ..... WMTS505M5U03PT WP10CT ........E18
4169565 ..... WMTS505M5U03PT WP25CT ........E18
4169566 ..... WMTS505M5U06PT WP10CT ........E18
4169567 ..... WMTS505M5U06PT WP25CT ........E18
4169568 ..... WMTS605M6U03PT WP10CT ........E18
4169569 ..... WMTS605M6U03PT WP25CT ........E18
4169570 ..... WMTS605M6U06PT WP10CT ........E18
4169571 ..... WMTS605M6U06PT WP25CT ........E18
4169572 ..... WMTS805M8U06PT WP10CT ........E18
4169573 ..... WMTS805M8U06PT WP25CT ........E18
4169574 ..... WMTS805M8U15PT WP10CT ........E18
4169575 ..... WMTS805M8U15PT WP25CT ........E18
4169576 ..... WMTC094N00CM13 WU25PT .......E14
4169577 ..... WMTC094N00CMW13 WU25PT ....E16
4169578 ..... WMTC094R05CM13 WU25PT ........E15
4169579 ..... WMTC094R05CMW13 WU25PT ....E17
4169580 ..... WMTC094R12CM13 WU25PT ........E15
4169581 ..... WMTC094R12CMW13 WU25PT ....E17
4169582 ..... WMTC125N00CM17 WU25PT .......E14
4169663 ..... WMTC125N00CMW17 WU25PT ....E16
4169664 ..... WMTC125R05CM17 WU25PT ........E15
4169665 ..... WMTC125R05CMW17 WU25PT ....E17
4169666 ..... WMTC125R12CM17 WU25PT ........E15
4169667 ..... WMTC125R12CMW17 WU25PT ....E17
4169668 ..... WMTC015N00CM08 WU25PT .......E14
4169669 ..... WMTC015N00CMW08 WU25PT ....E16
4169670 ..... WMTC015R05CM08 WU25PT ........E15
4169671 ..... WMTC015L05CM08 WU25PT ........E14
4169672 ..... WMTC015R12CM08 WU25PT ........E15
4169673 ..... WMTC020N00CM08 WU25PT .......E14
4169674 ..... WMTC020N00CMW08 WU25PT ....E16
4169675 ..... WMTC020R05CM08 WU25PT ........E15
Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 56 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRANDO b 28 20153 09PM
Z57
widia.com
Index by Order Number
Order No. Catalogue No. Page(s)
4169676 ..... WMTC020R05CMW08 WU25PT ....E17
4169677 ..... WMTC020L05CM08 WU25PT ........E14
4169678 ..... WMTC020R12CM08 WU25PT ........E15
4169679 ..... WMTC020R12CMW08 WU25PT ....E17
4169680 ..... WMTC020L12CM08 WU25PT ........E14
4169681 ..... WMTC020L12CMW08 WU25PT .....E16
4169682 ..... WMTC030N00CM17 WU25PT .......E14
4169683 ..... WMTC030N00CMW17 WU25PT ....E16
4169684 ..... WMTC030R05CM17 WU25PT ........E15
4169685 ..... WMTC030R05CMW17 WU25PT ....E17
4169686 ..... WMTC030L05CM17 WU25PT ........E14
4169687 ..... WMTC030L05CMW17 WU25PT .....E16
4169688 ..... WMTC030R12CM17 WU25PT ........E15
4169689 ..... WMTC030R12CMW17 WU25PT ....E17
4169690 ..... WMTC030L12CM17 WU25PT ........E14
4169691 ..... WMTC030L12CMW17 WU25PT .....E16
4169692 ..... WMTC040N00CM17 WU25PT .......E14
4169693 ..... WMTC040N00CMW17 WU25PT ....E16
4169694 ..... WMTC040R05CM17 WU25PT ........E15
4169695 ..... WMTC040L05CM17 WU25PT ........E14
4169696 ..... WMTC040R12CM17 WU25PT ........E15
4169697 ..... WMTC040L12CM17 WU25PT ........E14
4169857 ..... CCMT060202FP WP15CT ............. B31
4169858 ..... CCMT060204FP WP15CT ............. B31
4169859 ..... CCMT060208FP WP15CT ............. B31
4169860 ..... CCMT09T304FP WP15CT ............. B31
4169861 ..... CCMT09T308FP WP15CT ............. B31
4169862 ..... CCMT120404FP WP15CT ............. B31
4169960 ..... CNMG120408UR WP35CT ............ B43
4169961 ..... CNMG120412UR WP35CT ............ B43
4169962 ..... CNMG160612UR WP35CT ............ B43
4169963 ..... CNMG160616UR WP35CT ............ B43
4169964 ..... CNMG190612UR WP35CT ............ B43
4169965 ..... CNMG190616UR WP35CT ............ B43
4169966 ..... DNMG110408UR WP35CT ............ B62
4169967 ..... DNMG150408UR WP35CT ............ B62
4169968 ..... DNMG150412UR WP35CT ............ B62
4169969 ..... DNMG150608UR WP35CT ............ B62
4169970 ..... DNMG150612UR WP35CT ............ B62
4169971 ..... DNMG150616UR WP35CT ............ B62
4169975 ..... RCMT0602M0 WP15CT ................ B65
4169976 ..... RCMT0803M0 WP15CT ................ B65
4169977 ..... RCMT10T3M0 WP15CT ................ B65
4169978 ..... RCMT1204M0 WP15CT ................ B65
4169979 ..... RCMT1606M0 WP15CT ................ B65
4169980 ..... RCMX2006M0T WP15CT .............. B66
4169981 ..... RCMX2507M0T WP15CT .............. B66
4169982 ..... RCMX3209M0T WP15CT .............. B66
4169983 ..... VBMT160404 WP15CT ................. B94
4169984 ..... VBMT160408 WP15CT ................. B94
4169985 ..... VBMT160412 WP15CT ................. B94
4169989 ..... SNMG120408UR WP35CT ............ B75
4169990 ..... SNMG120412UR WP35CT ............ B75
4169991 ..... SNMG150612UR WP35CT ............ B75
4169992 ..... SNMG150616UR WP35CT ............ B75
4169993 ..... CCMT120408FP WP15CT ............. B31
4169994 ..... CCMT120412FP WP15CT ............. B31
4169995 ..... DCMT070204FP WP15CT ............. B48
4169996 ..... DCMT11T302FP WP15CT ............. B48
4169997 ..... DCMT11T304FP WP15CT ............. B48
4169998 ..... DCMT11T308FP WP15CT ............. B48
4169999 ..... DCMT11T312FP WP15CT ............. B48
4170000 ..... DCMT150404FP WP15CT ............. B48
4170001 ..... DCMT150408FP WP15CT ............. B48
4170002 ..... SCMT09T304FP WP15CT ............. B68
4170003 ..... SCMT09T308FP WP15CT ............. B68
4170004 ..... SCMT120408FP WP15CT ............. B68
4170005 ..... SCMT120412FP WP15CT ............. B68
4170006 ..... TCMT110204FP WP15CT ............. B82
4170007 ..... TCMT110208FP WP15CT ............. B82
4170008 ..... TCMT16T304FP WP15CT ............. B82
4170009 ..... TCMT16T308FP WP15CT ............. B82
4170010 ..... TCMT16T312FP WP15CT ............. B82
4170011 ..... TCMT220408FP WP15CT ............. B82
4170012 ..... VBMT110304FP WP15CT ............. B94
4170013 ..... VBMT160404FP WP15CT ............. B94
4170014 ..... VBMT160408FP WP15CT ............. B94
4170015 ..... CPMT060202FP WP15CT ............. B46
4170016 ..... CPMT060204FP WP15CT ............. B46
4170017 ..... CPMT060208FP WP15CT ............. B46
4170018 ..... CPMT09T304FP WP15CT ............. B46
4170019 ..... CPMT09T308FP WP15CT ............. B46
4170020 ..... DPMT070204FP WP15CT ............. B63
4170021 ..... DPMT11T304FP WP15CT ............. B63
4170022 ..... DPMT11T308FP WP15CT ............. B63
4170023 ..... SPMT09T304FP WP15CT ............. B79
4170024 ..... SPMT09T308FP WP15CT ............. B79
4170025 ..... TPMT090208FP WP15CT ............. B92
4170026 ..... TPMT110204FP WP15CT ............. B92
4170027 ..... TPMT110208FP WP15CT ............. B92
4170028 ..... TPMT16T304FP WP15CT .............. B92
4170029 ..... TPMT16T308FP WP15CT .............. B92
4170030 ..... WPMT06T304FP WP15CT .......... B105
4170031 ..... WPMT06T308FP WP15CT .......... B105
4170032 ..... CCMT060204FP WK20CT ............. B31
4170033 ..... SNMG190612UR WP35CT ............ B75
4170034 ..... SNMG190616UR WP35CT ............ B75
4170035 ..... TNMG160408UR WP35CT ............ B89
4170036 ..... TNMG220408UR WP35CT ............ B89
4170037 ..... TNMG220412UR WP35CT ............ B89
4170038 ..... VNMG160408UR WP35CT ............ B99
4170039 ..... WNMG060408UR WP35CT ......... B104
4170040 ..... WNMG080408UR WP35CT ......... B104
4170041 ..... WNMG080412UR WP35CT ......... B104
4170042 ..... WNMG080416UR WP35CT ......... B104
4170043 ..... CNMG120404MR WP35CT ........... B39
4170044 ..... CNMG120408MR WP35CT ........... B39
4170045 ..... CNMG120412MR WP35CT ........... B39
4170046 ..... CNMG160612MR WP35CT ........... B39
4170047 ..... CNMG160616MR WP35CT ........... B39
4170048 ..... CNMG190612MR WP35CT ........... B39
4170049 ..... CNMG190616MR WP35CT ........... B39
4170050 ..... DNMG110408MR WP35CT ........... B57
4170051 ..... DNMG150404MR WP35CT ........... B57
4170052 ..... DNMG150408MR WP35CT ........... B57
4170053 ..... DNMG150412MR WP35CT ........... B57
4170054 ..... DNMG150604MR WP35CT ........... B57
4170055 ..... DNMG150608MR WP35CT ........... B57
4170056 ..... DNMG150612MR WP35CT ........... B57
4170057 ..... SNMG120408MR WP35CT ........... B73
4170058 ..... SNMG190612MR WP35CT ........... B73
4170059 ..... TNMG160404MR WP35CT............ B86
4170060 ..... TNMG160408MR WP35CT............ B86
4170061 ..... TNMG160412MR WP35CT............ B86
4170062 ..... TNMG220404MR WP35CT............ B86
4170063 ..... TNMG220408MR WP35CT............ B86
4170064 ..... TNMG220412MR WP35CT............ B86
4170065 ..... TNMG220416MR WP35CT............ B86
4170066 ..... VNMG160408MR WP35CT ........... B97
4170067 ..... WNMG080408MR WP35CT ........ B102
4170068 ..... WNMG080412MR WP35CT ........ B102
4170083 ..... CCMT060208FP WK20CT ............. B31
4170084 ..... CCMT09T304FP WK20CT ............. B31
4170085 ..... CCMT09T308FP WK20CT ............. B31
4170086 ..... CCMT120404FP WK20CT ............. B31
4170087 ..... CCMT120408FP WK20CT ............. B31
4170088 ..... CCMT120412FP WK20CT ............. B31
4170089 ..... DCMT070204FP WK20CT ............. B48
4170090 ..... DCMT11T304FP WK20CT ............. B48
4170091 ..... DCMT11T308FP WK20CT ............. B48
4170092 ..... DCMT150408FP WK20CT ............. B48
4170093 ..... SCMT09T304FP WK20CT ............. B68
4170094 ..... SCMT09T308FP WK20CT ............. B68
4170095 ..... SCMT120408FP WK20CT ............. B68
4170096 ..... SCMT120412FP WK20CT ............. B68
4170097 ..... TCMT110204FP WK20CT ............. B82
4170098 ..... TCMT110208FP WK20CT ............. B82
4170099 ..... TCMT16T304FP WK20CT ............. B82
4170100 ..... TCMT16T308FP WK20CT ............. B82
4170101 ..... TCMT16T312FP WK20CT ............. B82
4170102 ..... TCMT220408FP WK20CT ............. B82
4170103 ..... VBMT160404FP WK20CT ............. B94
4170104 ..... VBMT160408FP WK20CT ............. B94
4170105 ..... CPMT060204FP WK20CT ............. B46
4170106 ..... CPMT060208FP WK20CT ............. B46
4170107 ..... CPMT09T304FP WK20CT ............. B46
4170108 ..... CPMT09T308FP WK20CT ............. B46
4170109 ..... DPMT11T308FP WK20CT ............. B63
4170110 ..... SPMT09T304FP WK20CT ............. B79
4170111 ..... SPMT09T308FP WK20CT ............. B79
4170112 ..... TPMT090208FP WK20CT ............. B92
4170113 ..... TPMT110204FP WK20CT ............. B92
4170114 ..... TPMT110208FP WK20CT ............. B92
4170115 ..... TPMT16T304FP WK20CT .............. B92
4170116 ..... TPMT16T308FP WK20CT .............. B92
4170119 ..... WMTR188I5PPC WU10PT ..............E26
4170120 ..... WMTR188I5PPC WU25PT ..............E26
4170121 ..... WMTR250I6PPC WU10PT ..............E26
4170122 ..... WMTR250I6PPC WU25PT ..............E26
4170140 ..... CCMT060202FP WP25CT ............. B31
4170141 ..... CCMT060204FP WP25CT ............. B31
4170142 ..... CCMT060208FP WP25CT ............. B31
4170163 ..... WMTR312I8PPC WU10PT ..............E26
4170164 ..... WMTR312I8PPC WU25PT ..............E26
4170170 ..... WMTR300M3PPC WU10PT ............E26
4170171 ..... WMTR300M3PPC WU25PT ............E26
4170172 ..... WMTR305M3UPC WU10PT ............E25
4170173 ..... WMTR305M3UPC WU25PT ............E25
4170174 ..... WMTR305M3UPC WP10CT ............E25
4170175 ..... WMTR400M4PPC WU10PT ............E26
4170176 ..... WMTR400M4PPC WU25PT ............E26
4170177 ..... WMTR405M4UPC WU10PT ............E25
4170178 ..... WMTR405M4UPC WU25PT ............E25
4170179 ..... WMTR405M4UPC WP10CT ............E25
4170180 ..... WMTR500M5PPC WU10PT ............E26
4170181 ..... WMTR500M5PPC WU25PT ............E26
4170182 ..... WMTR505M5UPC WU10PT ............E25
4170183 ..... WMTR505M5UPC WU25PT ............E25
4170184 ..... WMTR505M5UPC WP10CT ............E25
4170185 ..... WMTR600M6PPC WU10PT ............E26
4170186 ..... WMTR600M6PPC WU25PT ............E26
4170187 ..... WMTR605M6UPC WU10PT ............E25
4170188 ..... WMTR605M6UPC WU25PT ............E25
4170189 ..... WMTR605M6UPC WP10CT ............E25
4170190 ..... WMTR800M8PPC WU10PT ............E26
4170191 ..... WMTR800M8PPC WU25PT ............E26
4170192 ..... WMTR805M8UPC WU10PT ............E25
4170193 ..... WMTR805M8UPC WU25PT ............E25
4170194 ..... WMTR805M8UPC WP10CT ............E25
4170195 ..... WMTR300M3PPC WU10HT ............E26
4170196 ..... WMTR400M4PPC WU10HT ............E26
4170197 ..... CCMT060204MP WP15CT ............ B32
4170198 ..... CCMT09T304MP WP15CT ............ B32
4170199 ..... CCMT09T308MP WP15CT ............ B32
4170200 ..... CCMT120408MP WP15CT ............ B32
4170201 ..... DCMT11T304MP WP15CT ............ B49
4170202 ..... DCMT11T308MP WP15CT ............ B49
4170213 ..... DCMT11T312MP WP15CT ............ B49
4170214 ..... SCMT09T308MP WP15CT ............ B69
4170215 ..... SCMT120408MP WP15CT ............ B69
4170216 ..... TCMT16T308MP WP15CT ............ B82
4170217 ..... CCMT060204MP WP25CT ............ B32
4170218 ..... CCMT09T304MP WP25CT ............ B32
4170219 ..... CCMT09T308MP WP25CT ............ B32
4170220 ..... CCMT09T312MP WP25CT ............ B32
4170221 ..... CCMT120408MP WP25CT ............ B32
4170222 ..... CCMT120412MP WP25CT ............ B32
4170223 ..... DCMT11T304MP WP25CT ............ B49
4170224 ..... DCMT11T308MP WP25CT ............ B49
4170225 ..... DCMT11T312MP WP25CT ............ B49
4170226 ..... SCMT09T304MP WP25CT ............ B69
4170227 ..... SCMT09T308MP WP25CT ............ B69
4170228 ..... SCMT120404MP WP25CT ............ B69
4170229 ..... SCMT120408MP WP25CT ............ B69
4170230 ..... SCMT120412MP WP25CT ............ B69
4170231 ..... TCMT110208MP WP25CT ............ B82
4170232 ..... TCMT16T304MP WP25CT ............ B82
4170233 ..... TCMT16T308MP WP25CT ............ B82
4170234 ..... TCMT16T312MP WP25CT ............ B82
4170235 ..... VBMT160404MP WP25CT ............ B95
4170236 ..... VBMT160408MP WP25CT ............ B95
4170237 ..... CCMT060204MP WK20CT ............ B32
4170238 ..... CCMT09T304MP WK20CT ............ B32
4170239 ..... CCMT09T308MP WK20CT ............ B32
4170240 ..... CCMT120408MP WK20CT ............ B32
4170241 ..... CCMT120412MP WK20CT ............ B32
4170242 ..... DCMT11T304MP WK20CT ............ B49
4170243 ..... DCMT11T308MP WK20CT ............ B49
4170244 ..... SCMT09T304MP WK20CT ............ B69
4170245 ..... SCMT09T308MP WK20CT ............ B69
4170246 ..... SCMT120404MP WK20CT ............ B69
4170247 ..... SCMT120408MP WK20CT ............ B69
4170248 ..... SCMT120412MP WK20CT ............ B69
4170249 ..... TCMT110208MP WK20CT ............ B82
4170250 ..... TCMT16T304MP WK20CT ............ B82
4170251 ..... TCMT16T308MP WK20CT ............ B82
4170252 ..... TCMT16T312MP WK20CT ............ B82
4170253 ..... VBMT160404MP WK20CT ............ B95
4170254 ..... VBMT160408MP WK20CT ............ B95
4170255 ..... CPMT060208MP WP15CT ............ B46
4170256 ..... CPMT09T308MP WP15CT ............ B46
4170257 ..... CPMT060208MP WP25CT ............ B46
4170258 ..... CPMT09T308MP WP25CT ............ B46
4170259 ..... CPMT09T312MP WP25CT ............ B46
4170260 ..... DPMT11T308MP WP25CT ............ B64
4170261 ..... SPMT09T308MP WP25CT ............ B79
4170262 ..... SPMT120408MP WP25CT ............ B79
4170263 ..... TPMT110208MP WP25CT ............ B93
4170264 ..... TPMT16T308MP WP25CT ............ B93
4170265 ..... TPMT16T312MP WP25CT ............ B93
4170266 ..... CPMT09T308MP WK20CT ............ B46
4170267 ..... CPMT09T312MP WK20CT ............ B46
4170268 ..... DPMT11T308MP WK20CT ............ B64
4170269 ..... SPMT09T308MP WK20CT ............ B79
Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 57 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRAND O b 28 2015 3 09 PM
Z58 widia.com
Index by Order Number
Order No. Catalogue No. Page(s)
4170270 ..... SPMT120408MP WK20CT ............ B79
4170271 ..... TPMT110208MP WK20CT ............ B93
4170272 ..... TPMT16T308MP WK20CT ............ B93
4170273 ..... TPMT16T312MP WK20CT ............ B93
4170293 ..... CCMT09T302FP WP25CT ............. B31
4170294 ..... CCMT09T304FP WP25CT ............. B31
4170295 ..... CCMT09T308FP WP25CT ............. B31
4170296 ..... CCMT120404FP WP25CT ............. B31
4170297 ..... CCMT120408FP WP25CT ............. B31
4170298 ..... CCMT120412FP WP25CT ............. B31
4170299 ..... DCMT070202FP WP25CT ............. B48
4170300 ..... DCMT070204FP WP25CT ............. B48
4170301 ..... DCMT070208FP WP25CT ............. B48
4170302 ..... DCMT11T302FP WP25CT ............. B48
4170303 ..... DCMT11T304FP WP25CT ............. B48
4170304 ..... DCMT11T308FP WP25CT ............. B48
4170305 ..... DCMT11T312FP WP25CT ............. B48
4170306 ..... DCMT150404FP WP25CT ............. B48
4170307 ..... DCMT150408FP WP25CT ............. B48
4170308 ..... SCMT09T304FP WP25CT ............. B68
4170309 ..... SCMT09T308FP WP25CT ............. B68
4170310 ..... SCMT120404FP WP25CT ............. B68
4170311 ..... SCMT120408FP WP25CT ............. B68
4170312 ..... SCMT120412FP WP25CT ............. B68
4170313 ..... TCMT110204FP WP25CT ............. B82
4170314 ..... TCMT110208FP WP25CT ............. B82
4170315 ..... TCMT16T304FP WP25CT ............. B82
4170316 ..... TCMT16T308FP WP25CT ............. B82
4170317 ..... TCMT220408FP WP25CT ............. B82
4170318 ..... VBMT110302FP WP25CT ............. B94
4170319 ..... VBMT110304FP WP25CT ............. B94
4170320 ..... VBMT110308FP WP25CT ............. B94
4170321 ..... VBMT160402FP WP25CT ............. B94
4170322 ..... VBMT160404FP WP25CT ............. B94
4170323 ..... VBMT160408FP WP25CT ............. B94
4170324 ..... VBMT160412FP WP25CT ............. B94
4170325 ..... CPMT060202FP WP25CT ............. B46
4170326 ..... CPMT060204FP WP25CT ............. B46
4170327 ..... CPMT060208FP WP25CT ............. B46
4170328 ..... CPMT09T304FP WP25CT ............. B46
4170329 ..... CPMT09T308FP WP25CT ............. B46
4170330 ..... DPMT070204FP WP25CT ............. B63
4170331 ..... DPMT11T304FP WP25CT ............. B63
4170332 ..... DPMT11T308FP WP25CT ............. B63
4170333 ..... SPMT09T304FP WP25CT ............. B79
4170334 ..... SPMT09T308FP WP25CT ............. B79
4170335 ..... TPMT090208FP WP25CT ............. B92
4170336 ..... TPMT110204FP WP25CT ............. B92
4170337 ..... TPMT110208FP WP25CT ............. B92
4170338 ..... TPMT16T304FP WP25CT .............. B92
4170339 ..... TPMT16T308FP WP25CT .............. B92
4170340 ..... TPMT220408FP WP25CT ............. B92
4170341 ..... WPMT040204FP WP25CT .......... B105
4170342 ..... WPMT06T308FP WP25CT .......... B105
4170343 ..... WPMTS3T104FP WP25CT .......... B105
4170368 ..... CCMW060204 WK20CT ................ B34
4170369 ..... CCMW090304 WK20CT ................ B34
4170370 ..... CCMW090308 WK20CT ................ B34
4170371 ..... CCMW09T304 WK20CT ................ B34
4170372 ..... CCMW09T308 WK20CT ................ B34
4170373 ..... CCMW120404 WK20CT ................ B34
4170374 ..... CCMW120408 WK20CT ................ B34
4170375 ..... DCMW070204 WK20CT................ B50
4170376 ..... DCMW11T304 WK20CT ................ B50
4170377 ..... DCMW150408 WK20CT................ B50
4170378 ..... SCMW090304 WK20CT ................ B70
4170379 ..... SCMW09T308 WK20CT ................ B70
4170380 ..... SCMW120408 WK20CT ................ B70
4170381 ..... TCMW110204 WK20CT ................ B83
4170382 ..... TCMW16T304 WK20CT ................ B83
4170385 ..... CM209R ASSY ......................... C8–10,
C12–16, C56
4170386 ..... CM210R ASSY ............C8–10, C12–15
4170387 ..... CM236R ASSY ................C9, C12, C14
4170388 ..... CM235R ASSY .............................. C17
4170389 ..... CM234RLP ASSY .................... C56–59
4170458 ..... CNMG120404ML WP25CT............ B38
4170459 ..... CNMG120408ML WP25CT............ B38
4170460 ..... CNMG120412ML WP25CT............ B38
4170461 ..... DNMG110404ML WP25CT ........... B56
4170462 ..... DNMG110408ML WP25CT ........... B56
4170464 ..... CCMW060204 WK05CT ................ B34
4170465 ..... CCMW090304 WK05CT ................ B34
4170466 ..... CCMW090308 WK05CT ................ B34
4170467 ..... CCMW09T304 WK05CT ................ B34
4170468 ..... CCMW09T308 WK05CT ................ B34
4170469 ..... CCMW120404 WK05CT ................ B34
4170470 ..... CCMW120408 WK05CT ................ B34
4170471 ..... DCMW070204 WK05CT................ B50
4170472 ..... DCMW11T304 WK05CT ................ B50
4170473 ..... DCMW150408 WK05CT................ B50
4170474 ..... SCMW090304 WK05CT ................ B70
4170475 ..... SCMW120408 WK05CT ................ B70
4170476 ..... TCMW110204 WK05CT ................ B83
4170477 ..... TCMW16T304 WK05CT ................ B83
4170478 ..... RCMT0602M0 WK20CT ................ B65
4170479 ..... RCMT0803M0 WK20CT ................ B65
4170480 ..... RCMT10T3M0 WK20CT ................ B65
4170481 ..... RCMT1204M0 WK20CT ................ B65
4170482 ..... RCMT1606M0 WK20CT ................ B65
4170483 ..... DNMG150404ML WP25CT ........... B56
4170484 ..... DNMG150408ML WP25CT ........... B56
4170485 ..... DNMG150604ML WP25CT ........... B56
4170486 ..... DNMG150608ML WP25CT ........... B56
4170487 ..... DNMG150612ML WP25CT ........... B56
4170488 ..... SNMG090308ML WP25CT ............ B72
4170489 ..... SNMG120408ML WP25CT ............ B72
4170490 ..... SNMG120412ML WP25CT ............ B72
4170491 ..... TNMG160404ML WP25CT ............ B85
4170492 ..... TNMG160408ML WP25CT ............ B85
4170493 ..... TNMG160412ML WP25CT ............ B85
4170494 ..... TNMG220408ML WP25CT ............ B85
4170495 ..... VNMG160404ML WP25CT ............ B97
4170496 ..... VNMG160408ML WP25CT ............ B97
4170497 ..... WNMG060408ML WP25CT ......... B101
4170498 ..... WNMG080404ML WP25CT ......... B101
4170499 ..... WNMG080408ML WP25CT ......... B101
4170500 ..... CNMG120404UR WP25CT ............ B43
4170501 ..... CNMG120408UR WP25CT ............ B43
4170502 ..... CNMG120412UR WP25CT ............ B43
4170503 ..... CNMG120416UR WP25CT ............ B43
4170504 ..... CNMG160608UR WP25CT ............ B43
4170505 ..... CNMG160612UR WP25CT ............ B43
4170506 ..... CNMG160616UR WP25CT ............ B43
4170507 ..... CNMG190612UR WP25CT ............ B43
4170508 ..... CNMG190616UR WP25CT ............ B43
4170509 ..... DNMG110408UR WP25CT ............ B62
4170510 ..... DNMG110412UR WP25CT ............ B62
4170511 ..... DNMG150408UR WP25CT ............ B62
4170512 ..... DNMG150412UR WP25CT ............ B62
4170513 ..... DNMG150608UR WP25CT ............ B62
4170514 ..... DNMG150612UR WP25CT ............ B62
4170515 ..... DNMG150616UR WP25CT ............ B62
4170516 ..... SNMG120408UR WP25CT ............ B75
4170517 ..... SNMG120412UR WP25CT ............ B75
4170518 ..... SNMG150612UR WP25CT ............ B75
4170519 ..... SNMG150616UR WP25CT ............ B75
4170520 ..... SNMG190612UR WP25CT ............ B75
4170521 ..... SNMG190616UR WP25CT ............ B75
4170522 ..... TNMG160408UR WP25CT ............ B89
4170523 ..... TNMG160412UR WP25CT ............ B89
4170524 ..... TNMG220408UR WP25CT ............ B89
4170525 ..... TNMG220412UR WP25CT ............ B89
4170526 ..... TNMG220416UR WP25CT ............ B89
4170527 ..... TNMG270612UR WP25CT ............ B89
4170528 ..... TNMG270616UR WP25CT ............ B89
4170529 ..... VNMG160408UR WP25CT ............ B99
4170530 ..... VNMG160412UR WP25CT ............ B99
4170531 ..... WNMG060408UR WP25CT ......... B104
4170532 ..... WNMG060412UR WP25CT ......... B104
4170533 ..... WNMG080408UR WP25CT ......... B104
4170534 ..... WNMG080412UR WP25CT ......... B104
4170535 ..... WNMG080416UR WP25CT ......... B104
4170536 ..... RCMT0602M0 WP25CT ................ B65
4170537 ..... RCMT0803M0 WP25CT ................ B65
4170538 ..... RCMT10T3M0 WP25CT ................ B65
4170539 ..... RCMT1204M0 WP25CT ................ B65
4170540 ..... RCMT1606M0T WP25CT .............. B66
4170541 ..... RCMX2006M0T WP25CT .............. B66
4170542 ..... RCMX2507M0T WP25CT .............. B66
4170543 ..... RCMX2006M0T WK20CT .............. B66
4170544 ..... RCMX2507M0T WK20CT .............. B66
4170546 ..... CNMG120404MR WP25CT ........... B39
4170547 ..... CNMG120408MR WP25CT ........... B39
4170548 ..... CNMG120412MR WP25CT ........... B39
4170549 ..... CNMG160608MR WP25CT ........... B39
4170550 ..... CNMG160612MR WP25CT ........... B39
4170551 ..... CNMG160616MR WP25CT ........... B39
4170552 ..... CNMG190612MR WP25CT ........... B39
4170553 ..... VBMT160404 WP25CT ................. B94
4170554 ..... VBMT160408 WP25CT ................. B94
4170555 ..... VBMT160412 WP25CT ................. B94
4170563 ..... CNMG190616MR WP25CT ........... B39
4170564 ..... DNMG110408MR WP25CT ........... B57
4170565 ..... DNMG150404MR WP25CT ........... B57
4170566 ..... DNMG150408MR WP25CT ........... B57
4170567 ..... DNMG150412MR WP25CT ........... B57
4170568 ..... DNMG150604MR WP25CT ........... B57
4170569 ..... DNMG150608MR WP25CT ........... B57
4170570 ..... DNMG150612MR WP25CT ........... B57
4170571 ..... SNMG120408MR WP25CT ........... B73
4170572 ..... SNMG190612MR WP25CT ........... B73
4170573 ..... TNMG160404MR WP25CT............ B86
4170574 ..... TNMG160408MR WP25CT............ B86
4170575 ..... TNMG160412MR WP25CT............ B86
4170576 ..... TNMG220404MR WP25CT............ B86
4170577 ..... TNMG220408MR WP25CT............ B86
4170578 ..... TNMG220412MR WP25CT............ B86
4170579 ..... TNMG220416MR WP25CT............ B86
4170580 ..... VNMG160408MR WP25CT ........... B97
4170581 ..... WNMG080408MR WP25CT ........ B102
4170582 ..... WNMG080412MR WP25CT ........ B102
4170583 ..... WNMG080416MR WP25CT ........ B102
4170645 ..... TPUN160304 WP25CT .................. B93
4170646 ..... TPUN160308 WP25CT .................. B93
4170647 ..... TPUN160312 WP25CT .................. B93
4170648 ..... TPUN220408 WP25CT .................. B93
4170649 ..... TPUN220412 WP25CT .................. B93
4170650 ..... SPMR090308 WP35CT ................. B78
4170651 ..... SPMR120304 WP35CT ................. B78
4170652 ..... SPMR120308 WP35CT ................. B78
4170752 ..... RCMT10T3M0 WP35CT ................ B65
4170783 ..... SPMR120312 WP35CT ................. B78
4170784 ..... TPMR110304 WP35CT ................. B92
4170785 ..... TPMR110308 WP35CT ................. B92
4170786 ..... TPMR160304 WP35CT ................. B92
4170787 ..... TPMR160308 WP35CT ................. B92
4170788 ..... TPMR160312 WP35CT ................. B92
4170789 ..... TPUN110304 WP35CT .................. B93
4170790 ..... TPUN220408 WP35CT .................. B93
4170791 ..... TPUN220412 WP35CT .................. B93
4170803 ..... RCMT1204M0 WP35CT ................ B65
4170804 ..... RCMT1606M0 WP35CT ................ B65
4170805 ..... RCMX2006M0T WP35CT .............. B66
4170806 ..... RCMX2507M0T WP35CT .............. B66
4170807 ..... VBMT160404 WP35CT ................. B94
4170808 ..... VBMT160408 WP35CT ................. B94
4170809 ..... VBMT160412 WP35CT ................. B94
4170853 ..... SPMR120304 WP15CT ................. B78
4170854 ..... SPMR120308 WP15CT ................. B78
4170856 ..... SPUN120304 WP15CT .................. B80
4170857 ..... SPUN120308 WP15CT .................. B80
4170858 ..... SPUN250620T WP15CT ................ B80
4170859 ..... TPMR110304 WP15CT ................. B92
4170860 ..... TPMR110308 WP15CT ................. B92
4170861 ..... TPMR160304 WP15CT ................. B92
4170862 ..... TPMR160308 WP15CT ................. B92
4170863 ..... TPMR160312 WP15CT ................. B92
4170864 ..... TPUN110304 WP15CT .................. B93
4170865 ..... TPUN110308 WP15CT .................. B93
4170866 ..... TPUN160304 WP15CT .................. B93
4170867 ..... TPUN160308 WP15CT .................. B93
4170868 ..... TPUN220408 WP15CT .................. B93
4170918 ..... M370D025Z03M12WO08 ..............M4
4170919 ..... M370D025Z03A25WO08L200 .......M5
4170920 ..... M370D025Z02A25WO08L300 .......M5
4170921 ..... M370D032Z03A32WO08L300 .......M5
4170922 ..... M370D040Z05WO08 .....................M6
4170943 ..... SPGN090308 WK20CT ................. B78
4170944 ..... SPGN120308 WK20CT ................. B78
4170945 ..... SPGN120312 WK20CT ................. B78
4170946 ..... SPMR090308 WK20CT ................. B78
4170947 ..... SPMR120304 WK20CT ................. B78
4170948 ..... SPMR120308 WK20CT ................. B78
4170949 ..... SPMR120312 WK20CT ................. B78
4170950 ..... SPUN120308 WK20CT .................. B80
4170951 ..... SPUN120312 WK20CT .................. B80
4170952 ..... TPGN110308 WK20CT .................. B91
4170953 ..... TPGN160308 WK20CT .................. B91
4170954 ..... TPMR110308 WK20CT ................. B92
4170955 ..... TPMR160304 WK20CT ................. B92
4170956 ..... TPMR160308 WK20CT ................. B92
4170957 ..... TPMR160312 WK20CT ................. B92
4170958 ..... TPUN160304 WK20CT .................. B93
4170959 ..... TPUN160308 WK20CT .................. B93
4170960 ..... TPUN160312 WK20CT .................. B93
4170961 ..... TPUN220412 WK20CT .................. B93
4170962 ..... SNUN120408 WK20CT ................. B77
4170963 ..... SNUN120412 WK20CT ................. B77
4170964 ..... TNUN160408 WK20CT.................. B91
4170965 ..... VNMG12T308 WK20CT ................. B96
4170966 ..... LNUX19194013 WK20CT .............. B64
4170967 ..... LNUX191940T WK20CT ................ B65
4170968 ..... LNUX30194013 WK20CT .............. B64
Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 58 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRANDO b 28 20153 09PM
Z59
widia.com
Index by Order Number
Order No. Catalogue No. Page(s)
4170969 ..... LNUX301940T WK20CT ................ B65
4170979 ..... CNMG120408RH WP15CT ............ B41
4170980 ..... CNMG120412RH WP15CT ............ B41
4170981 ..... CNMG120416RH WP15CT ............ B41
4170982 ..... CNMG160608RH WP15CT ............ B41
4170983 ..... CNMG160612RH WP15CT ............ B41
4170984 ..... CNMG160616RH WP15CT ............ B41
4170985 ..... CNMG190608RH WP15CT ............ B41
4170986 ..... CNMG190612RH WP15CT ............ B41
4170987 ..... CNMG190616RH WP15CT ............ B41
4170988 ..... CNMG190624RH WP15CT ............ B41
4170989 ..... DNMG150408RH WP15CT ............ B59
4170990 ..... DNMG150412RH WP15CT ............ B59
4170991 ..... DNMG150608RH WP15CT ............ B59
4170992 ..... DNMG150612RH WP15CT ............ B59
4170993 ..... DNMG150616RH WP15CT ............ B59
4170994 ..... DNMG190612RH WP15CT ............ B59
4170995 ..... RNMG090300RH WP15CT ............ B67
4170996 ..... RNMG120400RH WP15CT ............ B67
4170997 ..... RNMG190600RH WP15CT ............ B67
4170998 ..... SNMG120408RH WP15CT ............ B74
4170999 ..... SNMG120412RH WP15CT ............ B74
4171000 ..... SNMG120416RH WP15CT ............ B74
4171001 ..... SNMG150608RH WP15CT ............ B74
4171002 ..... SNMG150612RH WP15CT ............ B74
4171003 ..... SNMG150616RH WP15CT ............ B74
4171004 ..... SNMG190608RH WP15CT ............ B74
4171005 ..... SNMG190612RH WP15CT ............ B74
4171006 ..... SNMG190616RH WP15CT ............ B74
4171007 ..... TNMG160408RH WP15CT ............ B87
4171008 ..... TNMG160412RH WP15CT ............ B87
4171009 ..... TNMG220408RH WP15CT ............ B87
4171010 ..... TNMG220412RH WP15CT ............ B87
4171011 ..... TNMG220416RH WP15CT ............ B87
4171012 ..... TNMG270612RH WP15CT ............ B87
4171013 ..... TNMG270616RH WP15CT ............ B87
4171014 ..... TNMG330924RH WP15CT ............ B87
4171015 ..... VNMG160408RH WP15CT ............ B98
4171016 ..... VNMG220408RH WP15CT ............ B98
4171017 ..... VNMG220412RH WP15CT ............ B98
4171018 ..... WNMG060408RH WP15CT ......... B103
4171019 ..... WNMG080408RH WP15CT ......... B103
4171020 ..... WNMG080412RH WP15CT ......... B103
4171021 ..... WNMG080416RH WP15CT ......... B103
4171022 ..... CNMG120404UR WP15CT ............ B43
4171025 ..... CNMG120404FF WP15CT ............. B37
4171026 ..... CNMG120408FF WP15CT ............. B37
4171027 ..... CNMG120412FF WP15CT ............. B37
4171028 ..... DNMG110404FF WP15CT ............. B54
4171029 ..... DNMG110408FF WP15CT ............. B54
4171030 ..... DNMG150404FF WP15CT ............. B54
4171031 ..... DNMG150408FF WP15CT ............. B54
4171032 ..... DNMG150604FF WP15CT ............. B54
4171043 ..... DNMG150608FF WP15CT ............. B54
4171044 ..... DNMG150612FF WP15CT ............. B54
4171045 ..... SNMG090304FF WP15CT ............. B72
4171046 ..... SNMG090308FF WP15CT ............. B72
4171047 ..... SNMG120404FF WP15CT ............. B72
4171048 ..... SNMG120408FF WP15CT ............. B72
4171049 ..... SNMG120412FF WP15CT ............. B72
4171050 ..... TNMG160404FF WP15CT ............. B84
4171051 ..... TNMG160408FF WP15CT ............. B84
4171052 ..... TNMG160412FF WP15CT ............. B84
4171053 ..... VNMG160404FF WP15CT ............. B97
4171054 ..... VNMG160408FF WP15CT ............. B97
4171055 ..... WNMG060404FF WP15CT .......... B100
4171056 ..... WNMG060408FF WP15CT .......... B100
4171057 ..... WNMG080404FF WP15CT .......... B100
4171058 ..... WNMG080408FF WP15CT .......... B100
4171059 ..... CNMG120404ML WP15CT............ B38
4171060 ..... CNMG120408ML WP15CT............ B38
4171062 ..... DNMG110404ML WP15CT ........... B56
4171063 ..... DNMG110408ML WP15CT ........... B56
4171064 ..... DNMG110412ML WP15CT ........... B56
4171065 ..... DNMG150404ML WP15CT ........... B56
4171066 ..... DNMG150408ML WP15CT ........... B56
4171067 ..... DNMG150412ML WP15CT ........... B56
4171068 ..... DNMG150604ML WP15CT ........... B56
4171069 ..... DNMG150608ML WP15CT ........... B56
4171070 ..... DNMG150612ML WP15CT ........... B56
4171071 ..... SNMG090304ML WP15CT ............ B72
4171072 ..... SNMG090308ML WP15CT ............ B72
4171073 ..... SNMG120408ML WP15CT ............ B72
4171074 ..... SNMG120412ML WP15CT ............ B72
4171075 ..... TNMG160404ML WP15CT ............ B85
4171076 ..... TNMG160408ML WP15CT ............ B85
4171077 ..... TNMG160412ML WP15CT ............ B85
4171078 ..... TNMG220408ML WP15CT ............ B85
4171079 ..... VNMG160404ML WP15CT ............ B97
4171080 ..... VNMG160408ML WP15CT ............ B97
4171081 ..... WNMG060404ML WP15CT ......... B101
4171082 ..... WNMG060408ML WP15CT ......... B101
4171083 ..... WNMG080404ML WP15CT ......... B101
4171084 ..... WNMG080408ML WP15CT ......... B101
4171093 ..... CNMG120408UR WP15CT ............ B43
4171094 ..... CNMG120412UR WP15CT ............ B43
4171095 ..... CNMG120416UR WP15CT ............ B43
4171096 ..... CNMG160608UR WP15CT ............ B43
4171097 ..... CNMG160612UR WP15CT ............ B43
4171098 ..... CNMG160616UR WP15CT ............ B43
4171099 ..... CNMG190612UR WP15CT ............ B43
4171100 ..... CNMG190616UR WP15CT ............ B43
4171101 ..... DNMG110408UR WP15CT ............ B62
4171102 ..... DNMG110412UR WP15CT ............ B62
4171103 ..... DNMG150408UR WP15CT ............ B62
4171104 ..... DNMG150412UR WP15CT ............ B62
4171105 ..... DNMG150608UR WP15CT ............ B62
4171106 ..... DNMG150612UR WP15CT ............ B62
4171107 ..... DNMG150616UR WP15CT ............ B62
4171108 ..... SNMG120408UR WP15CT ............ B75
4171109 ..... SNMG120412UR WP15CT ............ B75
4171110 ..... SNMG120416UR WP15CT ............ B75
4171111 ..... SNMG150612UR WP15CT ............ B75
4171112 ..... SNMG150616UR WP15CT ............ B75
4171113 ..... SNMG190612UR WP15CT ............ B75
4171114 ..... SNMG190616UR WP15CT ............ B75
4171115 ..... TNMG160408UR WP15CT ............ B89
4171116 ..... TNMG160412UR WP15CT ............ B89
4171117 ..... TNMG160416UR WP15CT ............ B89
4171118 ..... TNMG220408UR WP15CT ............ B89
4171119 ..... TNMG220412UR WP15CT ............ B89
4171120 ..... TNMG220416UR WP15CT ............ B89
4171121 ..... TNMG270612UR WP15CT ............ B89
4171122 ..... TNMG270616UR WP15CT ............ B89
4171123 ..... VNMG160408UR WP15CT ............ B99
4171124 ..... VNMG160412UR WP15CT ............ B99
4171125 ..... WNMG060408UR WP15CT ......... B104
4171126 ..... WNMG060412UR WP15CT ......... B104
4171127 ..... WNMG080408UR WP15CT ......... B104
4171128 ..... WNMG080412UR WP15CT ......... B104
4171129 ..... WNMG080416UR WP15CT ......... B104
4171130 ..... CNMG120404MR WP15CT ........... B39
4171131 ..... CNMG120408MR WP15CT ........... B39
4171132 ..... CNMG120412MR WP15CT ........... B39
4171133 ..... CNMG120416MR WP15CT ........... B39
4171134 ..... CNMG160608MR WP15CT ........... B39
4171135 ..... CNMG160612MR WP15CT ........... B39
4171136 ..... CNMG160616MR WP15CT ........... B39
4171137 ..... CNMG190612MR WP15CT ........... B39
4171138 ..... CNMG190616MR WP15CT ........... B39
4171139 ..... DNMG110408MR WP15CT ........... B57
4171140 ..... DNMG150404MR WP15CT ........... B57
4171141 ..... DNMG150408MR WP15CT ........... B57
4171142 ..... DNMG150412MR WP15CT ........... B57
4171143 ..... DNMG150604MR WP15CT ........... B57
4171144 ..... DNMG150608MR WP15CT ........... B57
4171145 ..... DNMG150612MR WP15CT ........... B57
4171146 ..... SNMG120408MR WP15CT ........... B73
4171147 ..... SNMG150612MR WP15CT ........... B73
4171148 ..... SNMG190612MR WP15CT ........... B73
4171149 ..... SNMG190616MR WP15CT ........... B73
4171150 ..... TNMG160404MR WP15CT............ B86
4171151 ..... TNMG160408MR WP15CT............ B86
4171152 ..... TNMG160412MR WP15CT............ B86
4171153 ..... TNMG220404MR WP15CT............ B86
4171154 ..... TNMG220408MR WP15CT............ B86
4171155 ..... TNMG220412MR WP15CT............ B86
4171156 ..... TNMG220416MR WP15CT............ B86
4171157 ..... VNMG160408MR WP15CT ........... B97
4171158 ..... WNMG080408MR WP15CT ........ B102
4171159 ..... WNMG080412MR WP15CT ........ B102
4171160 ..... WNMG080416MR WP15CT ........ B102
4171223 ..... M370D050Z06WO08 .....................M6
4171224 ..... M370D052Z06WO08 .....................M6
4171225 ..... M370D080Z07WO08 .....................M6
4171318 ..... CNMG120404FF WK20CT ............. B37
4171319 ..... CNMG120408FF WK20CT ............. B37
4171320 ..... CNMG120412FF WK20CT ............. B37
4171321 ..... DNMG110404FF WK20CT ............. B54
4171322 ..... DNMG110408FF WK20CT ............. B54
4171348 ..... CNMG120412ML WP15CT............ B38
4171373 ..... DNMG150408FF WK20CT ............. B54
4171374 ..... DNMG150412FF WK20CT ............. B54
4171375 ..... DNMG150604FF WK20CT ............. B54
4171376 ..... DNMG150608FF WK20CT ............. B54
4171377 ..... DNMG150612FF WK20CT ............. B54
4171378 ..... SNMG090304FF WK20CT ............. B72
4171379 ..... SNMG090308FF WK20CT ............. B72
4171380 ..... SNMG120404FF WK20CT ............. B72
4171381 ..... SNMG120408FF WK20CT ............. B72
4171382 ..... SNMG120412FF WK20CT ............. B72
4171383 ..... TNMG110304FF WK20CT ............. B84
4171384 ..... TNMG110308FF WK20CT ............. B84
4171385 ..... TNMG160404FF WK20CT ............. B84
4171386 ..... TNMG160408FF WK20CT ............. B84
4171387 ..... TNMG160412FF WK20CT ............. B84
4171388 ..... WNMG060404FF WK20CT .......... B100
4171389 ..... WNMG060408FF WK20CT .......... B100
4171390 ..... CNMG120404ML WK20CT............ B38
4171391 ..... CNMG120408ML WK20CT............ B38
4171392 ..... CNMG120412ML WK20CT............ B38
4171393 ..... CNMG120416ML WK20CT............ B38
4171394 ..... DNMG110404ML WK20CT ........... B56
4171395 ..... DNMG110408ML WK20CT ........... B56
4171396 ..... DNMG150404ML WK20CT ........... B56
4171397 ..... DNMG150408ML WK20CT ........... B56
4171398 ..... DNMG150412ML WK20CT ........... B56
4171399 ..... DNMG150604ML WK20CT ........... B56
4171400 ..... DNMG150608ML WK20CT ........... B56
4171401 ..... DNMG150612ML WK20CT ........... B56
4171402 ..... SNMG090308ML WK20CT ............ B72
4171403 ..... SNMG120404ML WK20CT ............ B72
4171404 ..... SNMG120408ML WK20CT ............ B72
4171405 ..... SNMG120412ML WK20CT ............ B72
4171406 ..... SNMG120416ML WK20CT ............ B72
4171407 ..... TNMG110304ML WK20CT ............ B85
4171408 ..... TNMG110308ML WK20CT ............ B85
4171409 ..... TNMG160404ML WK20CT ............ B85
4171410 ..... TNMG160408ML WK20CT ............ B85
4171411 ..... TNMG160412ML WK20CT ............ B85
4171412 ..... TNMG220404ML WK20CT ............ B85
4171413 ..... VNMG160404ML WK20CT ............ B97
4171414 ..... VNMG160408ML WK20CT ............ B97
4171415 ..... WNMG060404ML WK20CT ......... B101
4171416 ..... WNMG060408ML WK20CT ......... B101
4171417 ..... WNMG080404ML WK20CT ......... B101
4171418 ..... WNMG080408ML WK20CT ......... B101
4171419 ..... CNMG120412UR WK20CT ............ B43
4171420 ..... CNMG120416UR WK20CT ............ B43
4171421 ..... CNMG160608UR WK20CT ............ B43
4171422 ..... CNMG160612UR WK20CT ............ B43
4171423 ..... CNMG160616UR WK20CT ............ B43
4171424 ..... CNMG190612UR WK20CT ............ B43
4171425 ..... CNMG190616UR WK20CT ............ B43
4171426 ..... DNMG110408UR WK20CT ............ B62
4171427 ..... DNMG110412UR WK20CT ............ B62
4171428 ..... DNMG150408UR WK20CT ............ B62
4171429 ..... DNMG150412UR WK20CT ............ B62
4171430 ..... DNMG150416UR WK20CT ............ B62
4171431 ..... DNMG150608UR WK20CT ............ B62
4171432 ..... DNMG150612UR WK20CT ............ B62
4171433 ..... DNMG150616UR WK20CT ............ B62
4171434 ..... SNMG120408UR WK20CT ............ B75
4171435 ..... SNMG120412UR WK20CT ............ B75
4171436 ..... SNMG120416UR WK20CT ............ B75
4171437 ..... SNMG150612UR WK20CT ............ B75
4171438 ..... SNMG150616UR WK20CT ............ B75
4171439 ..... SNMG190612UR WK20CT ............ B75
4171440 ..... SNMG190616UR WK20CT ............ B75
4171441 ..... TNMG160408UR WK20CT ............ B89
4171442 ..... TNMG160412UR WK20CT ............ B89
4171443 ..... TNMG160416UR WK20CT ............ B89
4171444 ..... TNMG220408UR WK20CT ............ B89
4171445 ..... TNMG220412UR WK20CT ............ B89
4171446 ..... TNMG220416UR WK20CT ............ B89
4171447 ..... TNMG270612UR WK20CT ............ B89
4171448 ..... TNMG270616UR WK20CT ............ B89
4171449 ..... VNMG160408UR WK20CT ............ B99
4171450 ..... VNMG160412UR WK20CT ............ B99
4171451 ..... WNMG060408UR WK20CT ......... B104
4171452 ..... WNMG060412UR WK20CT ......... B104
4171453 ..... WNMG080408UR WK20CT ......... B104
4171454 ..... WNMG080412UR WK20CT ......... B104
4171455 ..... WNMG080416UR WK20CT ......... B104
4171504 ..... CNMG120408RH WP25CT ............ B41
4171505 ..... CNMG120412RH WP25CT ............ B41
4171506 ..... CNMG120416RH WP25CT ............ B41
4171507 ..... CNMG160608RH WP25CT ............ B41
4171508 ..... CNMG160612RH WP25CT ............ B41
4171509 ..... CNMG160616RH WP25CT ............ B41
4171510 ..... CNMG190608RH WP25CT ............ B41
4171511 ..... CNMG190612RH WP25CT ............ B41
4171512 ..... CNMG190616RH WP25CT ............ B41
4171523 ..... CNMG190624RH WP25CT ............ B41
Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 59 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRAND O b 28 2015 3 09 PM
Z60 widia.com
Index by Order Number
Order No. Catalogue No. Page(s)
4171524 ..... DNMG150408RH WP25CT ............ B59
4171525 ..... DNMG150412RH WP25CT ............ B59
4171526 ..... DNMG150608RH WP25CT ............ B59
4171527 ..... DNMG150612RH WP25CT ............ B59
4171528 ..... DNMG150616RH WP25CT ............ B59
4171529 ..... DNMG190612RH WP25CT ............ B59
4171530 ..... RNMG090300RH WP25CT ............ B67
4171531 ..... RNMG120400RH WP25CT ............ B67
4171532 ..... RNMG190600RH WP25CT ............ B67
4171533 ..... SNMG120408RH WP25CT ............ B74
4171534 ..... SNMG120412RH WP25CT ............ B74
4171535 ..... SNMG120416RH WP25CT ............ B74
4171536 ..... SNMG150608RH WP25CT ............ B74
4171537 ..... SNMG150612RH WP25CT ............ B74
4171538 ..... SNMG150616RH WP25CT ............ B74
4171539 ..... SNMG190608RH WP25CT ............ B74
4171540 ..... SNMG190612RH WP25CT ............ B74
4171541 ..... SNMG190616RH WP25CT ............ B74
4171542 ..... TNMG160408RH WP25CT ............ B87
4171543 ..... TNMG160412RH WP25CT ............ B87
4171544 ..... TNMG220408RH WP25CT ............ B87
4171545 ..... TNMG220412RH WP25CT ............ B87
4171546 ..... TNMG220416RH WP25CT ............ B87
4171547 ..... TNMG270612RH WP25CT ............ B87
4171548 ..... TNMG270616RH WP25CT ............ B87
4171549 ..... TNMG330924RH WP25CT ............ B87
4171550 ..... VNMG160408RH WP25CT ............ B98
4171551 ..... VNMG220408RH WP25CT ............ B98
4171552 ..... VNMG220412RH WP25CT ............ B98
4171553 ..... WNMG060408RH WP25CT ......... B103
4171554 ..... WNMG080408RH WP25CT ......... B103
4171555 ..... WNMG080412RH WP25CT ......... B103
4171556 ..... WNMG080416RH WP25CT ......... B103
4171585 ..... CNMP120404 WM15CT ................ B45
4171586 ..... CNMP120408 WM15CT ................ B45
4171587 ..... CNMP120412 WM15CT ................ B45
4171588 ..... CNMP160608 WM15CT ................ B45
4171589 ..... CNMP160612 WM15CT ................ B45
4171590 ..... CNMP190616 WM15CT ................ B45
4171591 ..... DNMP150404 WM15CT ................ B63
4171592 ..... DNMP150408 WM15CT ................ B63
4171595 ..... CNMA120404 WK05CT................. B36
4171596 ..... CNMA120408 WK05CT................. B36
4171597 ..... CNMA120412 WK05CT................. B36
4171598 ..... CNMA120416 WK05CT................. B36
4171599 ..... CNMA160612 WK05CT................. B36
4171600 ..... CNMA160616 WK05CT................. B36
4171601 ..... CNMA190608 WK05CT................. B36
4171602 ..... CNMA190612 WK05CT................. B36
4171633 ..... CNMA190616 WK05CT................. B36
4171634 ..... DNMA110408 WK05CT ................ B52
4171635 ..... DNMA150408 WK05CT ................ B52
4171636 ..... DNMA150412 WK05CT ................ B52
4171637 ..... DNMA150608 WK05CT ................ B52
4171638 ..... DNMA150612 WK05CT ................ B52
4171639 ..... RNMA120400 WK05CT ................. B67
4171640 ..... SNMA120408 WK05CT ................. B71
4171641 ..... SNMA120412 WK05CT ................. B71
4171642 ..... SNMA120416 WK05CT ................. B71
4171643 ..... SNMA150612 WK05CT ................. B71
4171644 ..... SNMA150616 WK05CT ................. B71
4171645 ..... SNMA190612 WK05CT ................. B71
4171646 ..... SNMA190616 WK05CT ................. B71
4171647 ..... TNMA160408 WK05CT ................. B84
4171648 ..... TNMA160412 WK05CT ................. B84
4171649 ..... TNMA220408 WK05CT ................. B84
4171651 ..... TNMA220416 WK05CT ................. B84
4171652 ..... VNMA160408 WK05CT ................. B96
4171653 ..... WNMA060408 WK05CT .............. B100
4171654 ..... WNMA080408 WK05CT .............. B100
4171655 ..... WNMA080412 WK05CT .............. B100
4171656 ..... WNMA080416 WK05CT .............. B100
4171657 ..... CNMG120404ML WK05CT............ B38
4171658 ..... CNMG120408ML WK05CT............ B38
4171659 ..... CNMG120412ML WK05CT............ B38
4171660 ..... DNMG110404ML WK05CT ........... B56
4171661 ..... DNMG110408ML WK05CT ........... B56
4171662 ..... DNMG150404ML WK05CT ........... B56
4171663 ..... DNMG150408ML WK05CT ........... B56
4171664 ..... DNMG150412ML WK05CT ........... B56
4171665 ..... DNMG150604ML WK05CT ........... B56
4171666 ..... DNMG150608ML WK05CT ........... B56
4171667 ..... DNMG150612ML WK05CT ........... B56
4171668 ..... SNMG090308ML WK05CT ............ B72
4171669 ..... SNMG120408ML WK05CT ............ B72
4171670 ..... SNMG120412ML WK05CT ............ B72
4171671 ..... TNMG160404ML WK05CT ............ B85
4171672 ..... TNMG160408ML WK05CT ............ B85
4171673 ..... TNMG160412ML WK05CT ............ B85
4171674 ..... VNMG160404ML WK05CT ............ B97
4171675 ..... VNMG160408ML WK05CT ............ B97
4171676 ..... WNMG060404ML WK05CT ......... B101
4171677 ..... WNMG060408ML WK05CT ......... B101
4171678 ..... WNMG080404ML WK05CT ......... B101
4171679 ..... WNMG080408ML WK05CT ......... B101
4171680 ..... CNMG120404FW WK05CT ........... B38
4171681 ..... CNMG120408FW WK05CT ........... B38
4171682 ..... CNMG120408MW WK05CT .......... B40
4171683 ..... CNMG120412FW WK05CT ........... B38
4171684 ..... CNMG120412MW WK05CT .......... B40
4171685 ..... DNMG150404FW WK05CT ........... B55
4171686 ..... DNMG150408FW WK05CT ........... B55
4171687 ..... DNMG150408MW WK05CT .......... B58
4171688 ..... DNMG150412MW WK05CT .......... B58
4171689 ..... DNMG150604FW WK05CT ........... B55
4171690 ..... DNMG150608FW WK05CT ........... B55
4171691 ..... DNMG150608MW WK05CT .......... B58
4171692 ..... DNMG150612MW WK05CT .......... B58
4171693 ..... WNMG080404FW WK05CT ........ B101
4171694 ..... WNMG080408FW WK05CT ........ B101
4171695 ..... WNMG080408MW WK05CT ....... B102
4171696 ..... WNMG080412FW WK05CT ........ B101
4171697 ..... WNMG080412MW WK05CT ....... B102
4171698 ..... CNMG120412RH WP35CT ............ B41
4171699 ..... CNMG120416RH WP35CT ............ B41
4171700 ..... CNMG160608RH WP35CT ............ B41
4171701 ..... CNMG160612RH WP35CT ............ B41
4171702 ..... CNMG160616RH WP35CT ............ B41
4171703 ..... CNMG190608RH WP35CT ............ B41
4171704 ..... CNMG190612RH WP35CT ............ B41
4171705 ..... CNMG190616RH WP35CT ............ B41
4171706 ..... CNMG190624RH WP35CT ............ B41
4171707 ..... DNMG150408RH WP35CT ............ B59
4171708 ..... DNMG150412RH WP35CT ............ B59
4171709 ..... DNMG150608RH WP35CT ............ B59
4171710 ..... DNMG150612RH WP35CT ............ B59
4171711 ..... DNMG150616RH WP35CT ............ B59
4171712 ..... DNMG190612RH WP35CT ............ B59
4171713 ..... RNMG120400RH WP35CT ............ B67
4171714 ..... RNMG190600RH WP35CT ............ B67
4171715 ..... SNMG120408RH WP35CT ............ B74
4171716 ..... SNMG120412RH WP35CT ............ B74
4171717 ..... SNMG120416RH WP35CT ............ B74
4171718 ..... SNMG150608RH WP35CT ............ B74
4171719 ..... SNMG150612RH WP35CT ............ B74
4171720 ..... SNMG150616RH WP35CT ............ B74
4171721 ..... SNMG190608RH WP35CT ............ B74
4171722 ..... SNMG190612RH WP35CT ............ B74
4171723 ..... SNMG190616RH WP35CT ............ B74
4171724 ..... TNMG160408RH WP35CT ............ B87
4171725 ..... TNMG160412RH WP35CT ............ B87
4171726 ..... TNMG220408RH WP35CT ............ B87
4171727 ..... TNMG220412RH WP35CT ............ B87
4171728 ..... TNMG220416RH WP35CT ............ B87
4171729 ..... TNMG270612RH WP35CT ............ B87
4171730 ..... TNMG270616RH WP35CT ............ B87
4171731 ..... TNMG330924RH WP35CT ............ B87
4171732 ..... VNMG160408RH WP35CT ............ B98
4171733 ..... VNMG220408RH WP35CT ............ B98
4171734 ..... VNMG220412RH WP35CT ............ B98
4171735 ..... WNMG060408RH WP35CT ......... B103
4171736 ..... WNMG080408RH WP35CT ......... B103
4171737 ..... WNMG080412RH WP35CT ......... B103
4171738 ..... WNMG080416RH WP35CT ......... B103
4171742 ..... DNMG150604CT WM15CT ........... B53
4171753 ..... DNMG150608CT WM15CT ........... B53
4171754 ..... DNMG150612CT WM15CT ........... B53
4171755 ..... CNMG120404FW WM15CT .......... B38
4171756 ..... CNMG120408FW WM15CT .......... B38
4171757 ..... CNMG120412FW WM15CT .......... B38
4171758 ..... DNMG150404FW WM15CT .......... B55
4171759 ..... DNMG150408FW WM15CT .......... B55
4171760 ..... DNMG150604FW WM15CT .......... B55
4171761 ..... DNMG150608FW WM15CT .......... B55
4171762 ..... WNMG080404FW WM15CT........ B101
4171763 ..... WNMG080408FW WM15CT........ B101
4171764 ..... WNMG080412FW WM15CT........ B101
4171863 ..... CNMA120404 WK20CT................. B36
4171864 ..... CNMA120408 WK20CT................. B36
4171865 ..... CNMA120412 WK20CT................. B36
4171866 ..... CNMA120416 WK20CT................. B36
4171867 ..... CNMA160608 WK20CT................. B36
4171868 ..... CNMA160612 WK20CT................. B36
4171869 ..... CNMA160616 WK20CT................. B36
4171870 ..... CNMA190608 WK20CT................. B36
4171871 ..... CNMA190612 WK20CT................. B36
4171872 ..... CNMA190616 WK20CT................. B36
4171873 ..... DNMA110408 WK20CT ................ B52
4171874 ..... DNMA110412 WK20CT ................ B52
4171875 ..... DNMA150408 WK20CT ................ B52
4171876 ..... DNMA150412 WK20CT ................ B52
4171877 ..... DNMA150416 WK20CT ................ B52
4171878 ..... DNMA150608 WK20CT ................ B52
4171879 ..... DNMA150612 WK20CT ................ B52
4171880 ..... DNMA150616 WK20CT ................ B52
4171881 ..... RNMA120400 WK20CT ................. B67
4171882 ..... SNMA120408 WK20CT ................. B71
4171883 ..... SNMA120412 WK20CT ................. B71
4171884 ..... SNMA120416 WK20CT ................. B71
4171885 ..... SNMA150608 WK20CT ................. B71
4171886 ..... SNMA150612 WK20CT ................. B71
4171887 ..... SNMA150616 WK20CT ................. B71
4171888 ..... SNMA190612 WK20CT ................. B71
4171889 ..... SNMA190616 WK20CT ................. B71
4171890 ..... TNMA160408 WK20CT ................. B84
4171891 ..... TNMA160412 WK20CT ................. B84
4171892 ..... TNMA160416 WK20CT ................. B84
4171893 ..... TNMA220408 WK20CT ................. B84
4171894 ..... TNMA220412 WK20CT ................. B84
4171895 ..... TNMA220416 WK20CT ................. B84
4171896 ..... TNMA270616 WK20CT ................. B84
4171897 ..... VNMA160408 WK20CT ................. B96
4171898 ..... WNMA060408 WK20CT .............. B100
4171899 ..... WNMA060412 WK20CT .............. B100
4171900 ..... WNMA080408 WK20CT .............. B100
4171901 ..... WNMA080412 WK20CT .............. B100
4171902 ..... WNMA080416 WK20CT .............. B100
4171903 ..... CNMG120408RH WK20CT ............ B41
4171904 ..... CNMG120412RH WK20CT ............ B41
4171905 ..... CNMG120416RH WK20CT ............ B41
4171906 ..... CNMG160608RH WK20CT ............ B41
4171907 ..... CNMG160612RH WK20CT ............ B41
4171908 ..... CNMG160616RH WK20CT ............ B41
4171909 ..... CNMG190608RH WK20CT ............ B41
4171910 ..... CNMG190612RH WK20CT ............ B41
4171911 ..... CNMG190616RH WK20CT ............ B41
4171912 ..... DNMG150408RH WK20CT ............ B59
4171913 ..... DNMG150412RH WK20CT ............ B59
4171914 ..... DNMG150608RH WK20CT ............ B59
4171915 ..... DNMG150612RH WK20CT ............ B59
4171916 ..... DNMG150616RH WK20CT ............ B59
4171917 ..... RNMG190600RH WK20CT ............ B67
4171918 ..... SNMG120408RH WK20CT ............ B74
4171919 ..... SNMG120412RH WK20CT ............ B74
4171920 ..... SNMG120416RH WK20CT ............ B74
4171921 ..... SNMG150608RH WK20CT ............ B74
4171922 ..... SNMG150612RH WK20CT ............ B74
4171923 ..... SNMG150616RH WK20CT ............ B74
4171924 ..... SNMG190608RH WK20CT ............ B74
4171925 ..... SNMG190612RH WK20CT ............ B74
4171926 ..... SNMG190616RH WK20CT ............ B74
4171927 ..... TNMG160408RH WK20CT ............ B87
4171928 ..... TNMG160412RH WK20CT ............ B87
4171929 ..... TNMG220408RH WK20CT ............ B87
4171930 ..... TNMG220412RH WK20CT ............ B87
4171931 ..... TNMG220416RH WK20CT ............ B87
4171932 ..... WNMG080408RH WK20CT ......... B103
4171933 ..... WNMG080412RH WK20CT ......... B103
4171934 ..... WNMG080416RH WK20CT ......... B103
4172133 ..... DNMP150412 WM15CT ................ B63
4172134 ..... DNMP150604 WM15CT ................ B63
4172135 ..... DNMP150608 WM15CT ................ B63
4172136 ..... DNMP150612 WM15CT ................ B63
4172137 ..... SNMP120408 WM15CT ................ B77
4172138 ..... SNMP120412 WM15CT ................ B77
4172139 ..... SNMP150608 WM15CT ................ B77
4172140 ..... SNMP150612 WM15CT ................ B77
4172141 ..... SNMP150616 WM15CT ................ B77
4172142 ..... SNMP190616 WM15CT ................ B77
4172143 ..... TNMP160404 WM15CT ................ B90
4172144 ..... TNMP160408 WM15CT ................ B90
4172145 ..... TNMP160412 WM15CT ................ B90
4172146 ..... TNMP220404 WM15CT ................ B90
4172147 ..... TNMP220408 WM15CT ................ B90
4172148 ..... TNMP220412 WM15CT ................ B90
4172230 ..... TNMA220412 WK05CT ................. B84
4172334 ..... CNMG120404UM WM15CT .......... B42
4172335 ..... CNMG120408UM WM15CT .......... B42
4172336 ..... CNMG120412UM WM15CT .......... B42
4172337 ..... DNMG110404UM WM15CT .......... B61
4172338 ..... DNMG110408UM WM15CT .......... B61
4172339 ..... DNMG110412UM WM15CT .......... B61
4172340 ..... DNMG150404UM WM15CT .......... B61
4172341 ..... DNMG150408UM WM15CT .......... B61
Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 60 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRANDO b 28 20153 09PM
Z61
widia.com
Index by Order Number
Order No. Catalogue No. Page(s)
4172342 ..... DNMG150412UM WM15CT .......... B61
4172345 ..... CNMG120404FF WM25CT ............ B37
4172346 ..... CNMG120408FF WM25CT ............ B37
4172347 ..... CNMG120412FF WM25CT ............ B37
4172348 ..... DNMG110404FF WM25CT ............ B54
4172349 ..... DNMG110408FF WM25CT ............ B54
4172350 ..... DNMG110412FF WM25CT ............ B54
4172351 ..... DNMG150404FF WM25CT ............ B54
4172352 ..... DNMG150408FF WM25CT ............ B54
4172363 ..... DNMG150604UM WM15CT .......... B61
4172364 ..... DNMG150608UM WM15CT .......... B61
4172365 ..... DNMG150612UM WM15CT .......... B61
4172366 ..... SNMG120404UM WM15CT .......... B75
4172367 ..... SNMG120408UM WM15CT .......... B75
4172368 ..... SNMG120412UM WM15CT .......... B75
4172369 ..... TNMG160404UM WM15CT ........... B88
4172370 ..... TNMG160408UM WM15CT ........... B88
4172371 ..... TNMG160412UM WM15CT ........... B88
4172372 ..... TNMG220404UM WM15CT ........... B88
4172373 ..... TNMG220408UM WM15CT ........... B88
4172374 ..... TNMG220412UM WM15CT ........... B88
4172375 ..... WNMG060404UM WM15CT ....... B104
4172376 ..... WNMG060408UM WM15CT ....... B104
4172377 ..... WNMG080404UM WM15CT ....... B104
4172378 ..... WNMG080408UM WM15CT ....... B104
4172379 ..... WNMG080412UM WM15CT ....... B104
4172380 ..... CNMG120404UM WM25CT .......... B42
4172381 ..... CNMG120408UM WM25CT .......... B42
4172382 ..... CNMG120412UM WM25CT .......... B42
4172383 ..... DNMG110404UM WM25CT .......... B61
4172384 ..... DNMG110408UM WM25CT .......... B61
4172385 ..... DNMG110412UM WM25CT .......... B61
4172386 ..... DNMG150404UM WM25CT .......... B61
4172387 ..... DNMG150408UM WM25CT .......... B61
4172388 ..... DNMG150412UM WM25CT .......... B61
4172389 ..... DNMG150604UM WM25CT .......... B61
4172390 ..... DNMG150608UM WM25CT .......... B61
4172391 ..... DNMG150612UM WM25CT .......... B61
4172392 ..... DNMG150616UM WM25CT .......... B61
4172393 ..... SNMG120404UM WM25CT .......... B75
4172394 ..... SNMG120408UM WM25CT .......... B75
4172395 ..... SNMG120412UM WM25CT .......... B75
4172396 ..... TNMG160404UM WM25CT ........... B88
4172397 ..... TNMG160408UM WM25CT ........... B88
4172398 ..... TNMG160412UM WM25CT ........... B88
4172399 ..... TNMG160416UM WM25CT ........... B88
4172400 ..... TNMG220404UM WM25CT ........... B88
4172401 ..... TNMG220408UM WM25CT ........... B88
4172402 ..... TNMG220412UM WM25CT ........... B88
4172403 ..... WNMG060404UM WM25CT ....... B104
4172404 ..... WNMG060408UM WM25CT ....... B104
4172405 ..... WNMG060412UM WM25CT ....... B104
4172406 ..... WNMG080404UM WM25CT ....... B104
4172407 ..... WNMG080408UM WM25CT ....... B104
4172408 ..... WNMG080412UM WM25CT ....... B104
4172409 ..... WNMG080416UM WM25CT ....... B104
4172410 ..... CNMG120404UM WM35CT .......... B42
4172411 ..... CNMG120408UM WM35CT .......... B42
4172412 ..... CNMG120412UM WM35CT .......... B42
4172413 ..... DNMG110404UM WM35CT .......... B61
4172414 ..... DNMG110408UM WM35CT .......... B61
4172415 ..... DNMG110412UM WM35CT .......... B61
4172416 ..... DNMG150404UM WM35CT .......... B61
4172417 ..... DNMG150408UM WM35CT .......... B61
4172418 ..... DNMG150412UM WM35CT .......... B61
4172419 ..... DNMG150604UM WM35CT .......... B61
4172420 ..... DNMG150608UM WM35CT .......... B61
4172421 ..... DNMG150612UM WM35CT .......... B61
4172422 ..... DNMG150616UM WM35CT .......... B61
4172423 ..... SNMG120404UM WM35CT .......... B75
4172424 ..... SNMG120408UM WM35CT .......... B75
4172425 ..... SNMG120412UM WM35CT .......... B75
4172426 ..... TNMG160404UM WM35CT ........... B88
4172427 ..... TNMG160408UM WM35CT ........... B88
4172428 ..... TNMG160412UM WM35CT ........... B88
4172429 ..... TNMG160416UM WM35CT ........... B88
4172430 ..... TNMG220404UM WM35CT ........... B88
4172431 ..... TNMG220408UM WM35CT ........... B88
4172432 ..... WNMG060404UM WM35CT ....... B104
4172433 ..... WNMG060408UM WM35CT ....... B104
4172434 ..... WNMG060412UM WM35CT ....... B104
4172435 ..... WNMG080404UM WM35CT ....... B104
4172436 ..... WNMG080408UM WM35CT ....... B104
4172437 ..... WNMG080412UM WM35CT ....... B104
4172438 ..... WNMG080416UM WM35CT ....... B104
4172439 ..... CNMP120404 WS10PT ................. B45
4172440 ..... CNMP120408 WS10PT ................. B45
4172441 ..... CNMP120412 WS10PT ................. B45
4172442 ..... CNMP160612 WS10PT ................. B45
4172483 ..... CNMP190612 WS10PT ................. B45
4172484 ..... DNMP150404 WS10PT ................. B63
4172485 ..... DNMP150408 WS10PT ................. B63
4172486 ..... DNMP150604 WS10PT ................. B63
4172487 ..... DNMP150608 WS10PT ................. B63
4172488 ..... DNMP150612 WS10PT ................. B63
4172489 ..... SNMP120408 WS10PT ................. B77
4172490 ..... SNMP120412 WS10PT ................. B77
4172491 ..... TNMP160404 WS10PT ................. B90
4172492 ..... TNMP160408 WS10PT ................. B90
4172493 ..... TNMP160412 WS10PT ................. B90
4172494 ..... TNMP220404 WS10PT ................. B90
4172495 ..... TNMP220408 WS10PT ................. B90
4172496 ..... TNMP220412 WS10PT ................. B90
4172497 ..... VNMP160404 WS10PT ................. B99
4172498 ..... VNMP160408 WS10PT ................. B99
4172499 ..... WNMP080408 WS10PT .............. B105
4172500 ..... WNMP080412 WS10PT .............. B105
4172614 ..... CNMP120408 WS25PT ................. B45
4172615 ..... CNMP120412 WS25PT ................. B45
4172616 ..... DNMP150608 WS25PT ................. B63
4172617 ..... DNMP150612 WS25PT ................. B63
4172618 ..... SNMP120408 WS25PT ................. B77
4172619 ..... SNMP120412 WS25PT ................. B77
4172620 ..... SNMP150608 WS25PT ................. B77
4172621 ..... SNMP150612 WS25PT ................. B77
4172622 ..... SNMP150616 WS25PT ................. B77
4172623 ..... TNMP160408 WS25PT ................. B90
4172624 ..... TNMP160412 WS25PT ................. B90
4172625 ..... TNMP220408 WS25PT ................. B90
4172626 ..... TNMP220412 WS25PT ................. B90
4172683 ..... DNMG150604FF WM25CT ............ B54
4172684 ..... DNMG150608FF WM25CT ............ B54
4172685 ..... DNMG150612FF WM25CT ............ B54
4172686 ..... SNMG090308FF WM25CT ............ B72
4172687 ..... SNMG120404FF WM25CT ............ B72
4172688 ..... SNMG120408FF WM25CT ............ B72
4172689 ..... SNMG120412FF WM25CT ............ B72
4172690 ..... SNMG120416FF WM25CT ............ B72
4172691 ..... TNMG160404FF WM25CT ............ B84
4172692 ..... TNMG160408FF WM25CT ............ B84
4172693 ..... TNMG160412FF WM25CT ............ B84
4172694 ..... VNMG160404FF WM25CT ............ B97
4172695 ..... VNMG160408FF WM25CT ............ B97
4172696 ..... WNMG060404FF WM25CT ......... B100
4172697 ..... WNMG080404FF WM25CT ......... B100
4172698 ..... WNMG080408FF WM25CT ......... B100
4172699 ..... DNMG150604CT WM25CT ........... B53
4172700 ..... DNMG150608CT WM25CT ........... B53
4172701 ..... DNMG150612CT WM25CT ........... B53
4172702 ..... CNMG120404FW WM25CT .......... B38
4172955 ..... CNMG120408MR WM25CT .......... B39
4172956 ..... CNMG120412MR WM25CT .......... B39
4172957 ..... CNMG120416MR WM25CT .......... B39
4172958 ..... CNMG160608MR WM25CT .......... B39
4172959 ..... CNMG160612MR WM25CT .......... B39
4172960 ..... CNMG160616MR WM25CT .......... B39
4172961 ..... CNMG190612MR WM25CT .......... B39
4172962 ..... CNMG190616MR WM25CT .......... B39
4173023 ..... DNMG150608MR WM25CT .......... B57
4173024 ..... DNMG150612MR WM25CT .......... B57
4173025 ..... SNMG120408MR WM25CT .......... B73
4173026 ..... SNMG120412MR WM25CT .......... B73
4173027 ..... SNMG120416MR WM25CT .......... B73
4173028 ..... SNMG150608MR WM25CT .......... B73
4173029 ..... SNMG150612MR WM25CT .......... B73
4173030 ..... SNMG150616MR WM25CT .......... B73
4173031 ..... SNMG190612MR WM25CT .......... B73
4173032 ..... SNMG190616MR WM25CT .......... B73
4173033 ..... WNMG080408MR WM25CT ....... B102
4173034 ..... WNMG080412MR WM25CT ....... B102
4173035 ..... CNMG120408RH WM25CT ........... B41
4173036 ..... CNMG120412RH WM25CT ........... B41
4173037 ..... CNMG120416RH WM25CT ........... B41
4173038 ..... CNMG160608RH WM25CT ........... B41
4173039 ..... CNMG160612RH WM25CT ........... B41
4173040 ..... CNMG160616RH WM25CT ........... B41
4173041 ..... CNMG190608RH WM25CT ........... B41
4173042 ..... CNMG190612RH WM25CT ........... B41
4173043 ..... CNMG190616RH WM25CT ........... B41
4173044 ..... CNMG190624RH WM25CT ........... B41
4173045 ..... DNMG150408RH WM25CT ........... B59
4173046 ..... DNMG150608RH WM25CT ........... B59
4173047 ..... DNMG150612RH WM25CT ........... B59
4173048 ..... DNMG150616RH WM25CT ........... B59
4173049 ..... SNMG120408RH WM25CT ........... B74
4173050 ..... SNMG120412RH WM25CT ........... B74
4173051 ..... SNMG120416RH WM25CT ........... B74
4173052 ..... SNMG150608RH WM25CT ........... B74
4173053 ..... SNMG150612RH WM25CT ........... B74
4173054 ..... SNMG150616RH WM25CT ........... B74
4173055 ..... SNMG190608RH WM25CT ........... B74
4173056 ..... SNMG190612RH WM25CT ........... B74
4173057 ..... SNMG190616RH WM25CT ........... B74
4173058 ..... TNMG160408RH WM25CT ........... B87
4173059 ..... TNMG160412RH WM25CT ........... B87
4173060 ..... TNMG220408RH WM25CT ........... B87
4173061 ..... TNMG220412RH WM25CT ........... B87
4173062 ..... TNMG220416RH WM25CT ........... B87
4173063 ..... WNMG060408RH WM25CT ........ B103
4173064 ..... WNMG080408RH WM25CT ........ B103
4173065 ..... WNMG080412RH WM25CT ........ B103
4173066 ..... WNMG080416RH WM25CT ........ B103
4173103 ..... CNMG120408FW WM25CT .......... B38
4173104 ..... CNMG120412FW WM25CT .......... B38
4173105 ..... DNMG150404FW WM25CT .......... B55
4173106 ..... DNMG150408FW WM25CT .......... B55
4173107 ..... DNMG150604FW WM25CT .......... B55
4173108 ..... DNMG150608FW WM25CT .......... B55
4173109 ..... WNMG080404FW WM25CT........ B101
4173110 ..... WNMG080408FW WM25CT........ B101
4173111 ..... WNMG080412FW WM25CT........ B101
4173112 ..... CNMG120408MW WM25CT ......... B40
4173113 ..... CNMG120412MW WM25CT ......... B40
4173114 ..... DNMG150408MW WM25CT ......... B58
4173115 ..... DNMG150412MW WM25CT ......... B58
4173116 ..... DNMG150608MW WM25CT ......... B58
4173117 ..... DNMG150612MW WM25CT ......... B58
4173118 ..... WNMG080408MW WM25CT ...... B102
4173119 ..... WNMG080412MW WM25CT ...... B102
4173120 ..... CNMG120408MR WM35CT .......... B39
4173121 ..... CNMG120412MR WM35CT .......... B39
4173122 ..... CNMG120416MR WM35CT .......... B39
4173133 ..... CNMG160608MR WM35CT .......... B39
4173134 ..... CNMG160612MR WM35CT .......... B39
4173135 ..... CNMG160616MR WM35CT .......... B39
4173136 ..... CNMG190612MR WM35CT .......... B39
4173137 ..... CNMG190616MR WM35CT .......... B39
4173138 ..... DNMG150608MR WM35CT .......... B57
4173139 ..... DNMG150612MR WM35CT .......... B57
4173140 ..... SNMG120408MR WM35CT .......... B73
4173141 ..... SNMG120412MR WM35CT .......... B73
4173142 ..... SNMG120416MR WM35CT .......... B73
4173143 ..... SNMG150608MR WM35CT .......... B73
4173144 ..... SNMG150612MR WM35CT .......... B73
4173145 ..... SNMG150616MR WM35CT .......... B73
4173146 ..... SNMG190612MR WM35CT .......... B73
4173147 ..... SNMG190616MR WM35CT .......... B73
4173148 ..... WNMG080408MR WM35CT ....... B102
4173149 ..... WNMG080412MR WM35CT ....... B102
4173459 ..... TDS504A03000 WU20PD ............T100
4173460 ..... TDS504A03175 WU20PD ............T100
4173461 ..... TDS504A03264 WU20PD ............T100
4173462 ..... TDS504A03500 WU20PD ............T100
4173463 ..... TDS504A03970 WU20PD ............T100
4173464 ..... TDS504A04000 WU20PD ............T100
4173465 ..... TDS504A04500 WU20PD ............T100
4173466 ..... TDS504A04600 WU20PD ............T100
4173467 ..... TDS504A04763 WU20PD ............T100
4173468 ..... TDS504A04800 WU20PD ............T100
4173469 ..... TDS504A05000 WU20PD ............T100
4173470 ..... TDS504A05100 WU20PD ............T100
4173471 ..... TDS504A05200 WU20PD ............T100
4173472 ..... TDS504A05300 WU20PD ............T100
4173473 ..... TDS504A05410 WU20PD ............T100
4173474 ..... TDS504A05500 WU20PD ............T100
4173475 ..... TDS504A05558 WU20PD ............T100
4173476 ..... TDS504A05600 WU20PD ............T100
4173477 ..... TDS504A05700 WU20PD ............T100
4173478 ..... TDS504A05800 WU20PD ............T100
4173479 ..... TDS504A06000 WU20PD ............T100
4173480 ..... TDS504A06200 WU20PD ............T100
4173481 ..... TDS504A06350 WU20PD ............T101
4173482 ..... TDS504A06500 WU20PD ............T101
4173483 ..... TDS504A06528 WU20PD ............T101
4173484 ..... TDS504A06600 WU20PD ............T101
4173485 ..... TDS504A06746 WU20PD ............T101
4173486 ..... TDS504A06800 WU20PD ............T101
4173487 ..... TDS504A06909 WU20PD ............T101
4173488 ..... TDS504A07000 WU20PD ............T101
4173489 ..... TDS504A07145 WU20PD ............T101
4173490 ..... TDS504A07500 WU20PD ............T101
4173491 ..... TDS504A07541 WU20PD ............T101
4173492 ..... TDS504A07700 WU20PD ............T101
4173493 ..... TDS504A07800 WU20PD ............T101
Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 61 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRAND O b 28 2015 3 09 PM
Z62 widia.com
Index by Order Number
Order No. Catalogue No. Page(s)
4173494 ..... TDS504A07938 WU20PD ............T101
4173495 ..... TDS504A08000 WU20PD ............T101
4173496 ..... TDS504A08100 WU20PD ............T101
4173497 ..... TDS504A08334 WU20PD ............T101
4173498 ..... TDS504A08433 WU20PD ............T101
4173499 ..... TDS504A08500 WU20PD ............T101
4173500 ..... TDS504A08700 WU20PD ............T101
4173501 ..... TDS504A08733 WU20PD ............T101
4173502 ..... TDS504A09000 WU20PD ............T101
4173503 ..... TDS504A09100 WU20PD ............T101
4173504 ..... TDS504A09129 WU20PD ............T101
4173505 ..... TDS504A09500 WU20PD ............T101
4173506 ..... TDS504A09525 WU20PD ............T101
4173507 ..... TDS504A09921 WU20PD ............T101
4173508 ..... TDS504A10000 WU20PD ............T101
4173509 ..... TDS504A10200 WU20PD ............T101
4173510 ..... TDS504A10300 WU20PD ............T101
4173511 ..... TDS504A10320 WU20PD ............T101
4173512 ..... TDS504A10500 WU20PD ............T101
4173513 ..... TDS504A10716 WU20PD ............T101
4173514 ..... TDS504A10800 WU20PD ............T101
4173515 ..... TDS504A11000 WU20PD ............T101
4173516 ..... TDS504A11113 WU20PD ............T101
4173517 ..... TDS504A11500 WU20PD ............T101
4173518 ..... TDS504A11800 WU20PD ............T101
4173519 ..... TDS504A12000 WU20PD ............T101
4173520 ..... TDS504A12100 WU20PD ............T102
4173521 ..... TDS504A12304 WU20PD ............T102
4173522 ..... TDS504A12700 WU20PD ............T102
4173523 ..... TDS504A13000 WU20PD ............T102
4173524 ..... TDS504A13100 WU20PD ............T102
4173525 ..... TDS504A13500 WU20PD ............T102
4173526 ..... TDS504A14000 WU20PD ............T102
4173527 ..... TDS504A14100 WU20PD ............T102
4173528 ..... TDS504A14288 WU20PD ............T102
4173529 ..... TDS504A14500 WU20PD ............T102
4173530 ..... TDS504A14684 WU20PD ............T102
4173531 ..... TDS504A15000 WU20PD ............T102
4173532 ..... TDS504A15500 WU20PD ............T102
4173533 ..... TDS504A15875 WU20PD ............T102
4173534 ..... TDS504A16000 WU20PD ............T102
4173535 ..... TDS504A16500 WU20PD ............T102
4173536 ..... TDS504A17000 WU20PD ............T102
4173537 ..... TDS504A17463 WU20PD ............T102
4173538 ..... TDS504A17500 WU20PD ............T102
4173539 ..... TDS504A18000 WU20PD ............T102
4173540 ..... TDS504A18500 WU20PD ............T102
4173541 ..... TDS504A19000 WU20PD ............T102
4173542 ..... TDS504A19050 WU20PD ............T102
4173543 ..... TDS504A19500 WU20PD ............T102
4173544 ..... TDS504A20000 WU20PD ............T102
4173545 ..... TDS504A03455 WU20PD ............T100
4173546 ..... TDS504A03734 WU20PD ............T100
4173547 ..... TDS504A09347 WU20PD ............T101
4173552 ..... CNMP120404 WM25CT ................ B45
4173653 ..... CNMP120408 WM25CT ................ B45
4173654 ..... CNMP120412 WM25CT ................ B45
4173655 ..... CNMP160608 WM25CT ................ B45
4173656 ..... CNMP160612 WM25CT ................ B45
4173657 ..... CNMP190616 WM25CT ................ B45
4173658 ..... DNMP150404 WM25CT ................ B63
4173659 ..... DNMP150408 WM25CT ................ B63
4173660 ..... DNMP150412 WM25CT ................ B63
4173661 ..... DNMP150604 WM25CT ................ B63
4173662 ..... DNMP150608 WM25CT ................ B63
4173663 ..... DNMP150612 WM25CT ................ B63
4173664 ..... SNMP120408 WM25CT ................ B77
4173665 ..... SNMP120412 WM25CT ................ B77
4173666 ..... SNMP150608 WM25CT ................ B77
4173667 ..... SNMP150612 WM25CT ................ B77
4173668 ..... SNMP150616 WM25CT ................ B77
4173669 ..... SNMP190616 WM25CT ................ B77
4173670 ..... TNMP160404 WM25CT ................ B90
4173671 ..... TNMP160408 WM25CT ................ B90
4173672 ..... TNMP160412 WM25CT ................ B90
4173673 ..... TNMP220404 WM25CT ................ B90
4173674 ..... TNMP220408 WM25CT ................ B90
4173675 ..... TNMP220412 WM25CT ................ B90
4173681 ..... CNMP120404 WM35CT ................ B45
4173682 ..... CNMP120408 WM35CT ................ B45
4173693 ..... CNMP120412 WM35CT ................ B45
4173694 ..... CNMP160608 WM35CT ................ B45
4173695 ..... CNMP160612 WM35CT ................ B45
4173696 ..... CNMP190616 WM35CT ................ B45
4173697 ..... DNMP150404 WM35CT ................ B63
4173698 ..... DNMP150408 WM35CT ................ B63
4173699 ..... DNMP150412 WM35CT ................ B63
4173700 ..... DNMP150604 WM35CT ................ B63
4173701 ..... DNMP150608 WM35CT ................ B63
4173702 ..... DNMP150612 WM35CT ................ B63
4173703 ..... SNMP120408 WM35CT ................ B77
4173704 ..... SNMP120412 WM35CT ................ B77
4173705 ..... SNMP150608 WM35CT ................ B77
4173706 ..... SNMP150612 WM35CT ................ B77
4173707 ..... SNMP150616 WM35CT ................ B77
4173708 ..... SNMP190616 WM35CT ................ B77
4173709 ..... TNMP160404 WM35CT ................ B90
4173710 ..... TNMP160408 WM35CT ................ B90
4173711 ..... TNMP160412 WM35CT ................ B90
4173712 ..... TNMP220404 WM35CT ................ B90
4173713 ..... TNMP220408 WM35CT ................ B90
4173714 ..... TNMP220412 WM35CT ................ B90
5077441 ..... A08JSCFPL06 WG ........................ C66
5077442 ..... A08JSCFPR06 WG ........................ C66
5077447 ..... A10KSCFPL06 WG ........................ C66
5077449 ..... A10KSCFPR06 WG ........................ C66
5077496 ..... A12MSCFPL06 WG ....................... C66
5077497 ..... A12MSCFPR06 WG ....................... C66
5077550 ..... A16RSCFPL06 WG ........................ C66
5077551 ..... A16RSCFPL09 WG ........................ C66
5077552 ..... A16RSCFPR06 WG ........................ C66
5077553 ..... A16RSCFPR09 WG ........................ C66
5077556 ..... A20SSCFPL06 WG ........................ C66
5077557 ..... A20SSCFPL09 WG ........................ C66
5077614 ..... A20SSCFPR06 WG ........................ C66
5077615 ..... A20SSCFPR09 WG ........................ C66
5077619 ..... A08JSCLPL06 WG ........................ C69
5077640 ..... A08JSCLPR06 WG ........................ C69
5077644 ..... A10KSCLPL06 WG ........................ C69
5077645 ..... A10KSCLPR06 WG ........................ C69
5077680 ..... A12MSCLPL06 WG ....................... C69
5077681 ..... A12MSCLPR06 WG ....................... C69
5077688 ..... A16RSCLPL06 WG ........................ C69
5077692 ..... A16RSCLPL09 WG ........................ C69
5077694 ..... A16RSCLPR06 WG ........................ C69
5077695 ..... A16RSCLPR09 WG ........................ C69
5077721 ..... A20SSCLPL09 WG ........................ C69
5077722 ..... A20SSCLPR09 WG ........................ C69
5078291 ..... A12MSDQPL07 WG....................... C72
5078292 ..... A12MSDQPR07 WG ...................... C72
5078293 ..... A16RSDQPL07 WG ....................... C72
5078295 ..... A16RSDQPR07 WG ....................... C72
5078296 ..... A20SSDQPL11 WG ....................... C72
5078298 ..... A20SSDQPR11 WG ....................... C72
5078299 ..... A25TSDQPL11 WG ........................ C72
5078320 ..... A25TSDQPR11 WG ....................... C72
5078329 ..... A12MSDUPL07 WG ....................... C75
5078360 ..... A12MSDUPR07 WG ...................... C75
5078363 ..... A16RSDUPL07 WG ........................ C75
5078364 ..... A16RSDUPR07 WG ....................... C75
5078367 ..... A20SSDUPL11 WG ........................ C75
5078368 ..... A20SSDUPR11 WG ....................... C75
5078375 ..... A25TSDUPL11 WG ........................ C75
5078376 ..... A25TSDUPR11 WG........................ C75
5078400 ..... A12MSDXPL07 ............................. C76
5078401 ..... A12MSDXPR07 ............................. C76
5078404 ..... A16RSDXPL07 .............................. C76
5078405 ..... A16RSDXPR07 .............................. C76
5078409 ..... A20SSDXPL11 .............................. C76
5078430 ..... A20SSDXPR11 .............................. C76
5086724 ..... A08JSTFPL09 WG ......................... C78
5086726 ..... A08JSTFPR09 WG ........................ C78
5086800 ..... A12MSTFPL11 WG........................ C78
5086802 ..... A12MSTFPR11 WG ....................... C78
5086806 ..... A20SSTFPL16 WG ........................ C78
5086807 ..... A20SSTFPR16 WG ........................ C78
5086808 ..... A25TSTFPL16 WG ......................... C78
5086809 ..... A25TSTFPR16 WG ........................ C78
5086810 ..... A12MSTWPL11 WG ...................... C80
5086811 ..... A12MSTWPR11 WG ...................... C80
5086812 ..... A16RSTWPL11 WG ....................... C80
5086813 ..... A16RSTWPR11 WG ....................... C80
5091303 ..... SNMG250924 WP35CT................. B71
5092757 ..... E08KSCFPL06A WG ...................... C67
5092759 ..... E08KSCFPR06A WG ...................... C67
5092920 ..... E10MSCFPL06A WG ..................... C67
5092921 ..... E10MSCFPR06A WG ..................... C67
5092922 ..... E12QSCFPL06 WG ........................ C67
5092923 ..... E12QSCFPR06 WG ........................ C67
5093093 ..... E08KSCLPL06A WG ...................... C70
5093094 ..... E08KSCLPR06A WG ...................... C70
5093097 ..... E10MSCLPL06A WG ..................... C70
5093098 ..... E10MSCLPR06A WG ..................... C70
5093143 ..... E12QSCLPL06 WG ........................ C70
5093144 ..... E12QSCLPR06 WG ........................ C70
5093149 ..... E16RSCLPL09 WG ........................ C70
5093181 ..... E16RSCLPR09 WG ........................ C70
5093184 ..... E20SSCLPL09 WG ........................ C70
5093185 ..... E20SSCLPR09 WG ........................ C70
5093429 ..... E12QSDUPL07 WG ........................ C75
5093591 ..... E12QSDUPR07 WG ....................... C75
5093633 ..... E16RSDUPL07 WG ........................ C75
5093634 ..... E16RSDUPR07 WG........................ C75
5093638 ..... E20SSDUPL11 WG ........................ C75
5093639 ..... E20SSDUPR11 WG ........................ C75
5093694 ..... E08KSTFPL09A WG....................... C79
5093696 ..... E08KSTFPR09A WG ...................... C79
5093699 ..... E10MSTFPL11A WG ...................... C79
5093750 ..... E10MSTFPR11A WG ..................... C79
5093754 ..... E12QSTFPL11 WG ........................ C79
5093755 ..... E12QSTFPR11 WG ........................ C79
5093758 ..... E16RSTFPL11 WG ......................... C79
5093759 ..... E16RSTFPR11 WG ........................ C79
5093772 ..... E20SSTFPL16 WG ......................... C79
5093773 ..... E20SSTFPR16 WG ........................ C79
5094162 ..... SCDPL1212H06 WG ..................... C42
5094163 ..... SCDPR1212H06 WG ..................... C42
5094212 ..... SCLPL1212M06 WG ..................... C43
5094217 ..... SCLPR1010M06 WG ..................... C43
5094218 ..... SCLPR1212M06 WG ..................... C43
5095163 ..... VNMG12T304 WS10PT ................. B96
5095164 ..... VNMG12T304 WS25PT ................. B96
5095165 ..... VNMG12T308 WS10PT ................. B96
5095166 ..... VNMG12T308 WS25PT ................. B96
5096566 ..... 571806002MT ALTIN-MT .............. O38
5096567 ..... 571806012MT ALTIN-MT .............. O38
5096568 ..... 571806022MT ALTIN-MT .............. O38
5096569 ..... 571808003MT ALTIN-MT .............. O38
5096660 ..... 571808013MT ALTIN-MT .............. O38
5096661 ..... 571808023MT ALTIN-MT .............. O38
5096662 ..... 571810014MT ALTIN-MT .............. O38
5096664 ..... 571810034MT ALTIN-MT .............. O38
5096665 ..... 571810044MT ALTIN-MT .............. O38
5096667 ..... 571812025MT ALTIN-MT .............. O38
5096668 ..... 571812035MT ALTIN-MT .............. O38
5096669 ..... 571812045MT ALTIN-MT .............. O38
5096752 ..... 571814024MT ALTIN-MT .............. O38
5096753 ..... 571814034MT ALTIN-MT .............. O38
5096754 ..... 571814044MT ALTIN-MT .............. O38
5096755 ..... 571814054MT ALTIN-MT .............. O38
5096756 ..... 571816016MT ALTIN-MT .............. O39
5096757 ..... 571816026MT ALTIN-MT .............. O39
5096758 ..... 571816036MT ALTIN-MT .............. O39
5096759 ..... 571816046MT ALTIN-MT .............. O39
5096800 ..... 571816056MT ALTIN-MT .............. O39
5096801 ..... 571818028MT ALTIN-MT .............. O39
5096802 ..... 571818038MT ALTIN-MT .............. O39
5096803 ..... 571818048MT ALTIN-MT .............. O39
5096804 ..... 571818058MT ALTIN-MT .............. O39
5096805 ..... 571820017MT ALTIN-MT .............. O39
5096806 ..... 571820027MT ALTIN-MT .............. O39
5096807 ..... 571820037MT ALTIN-MT .............. O39
5096808 ..... 571820047MT ALTIN-MT .............. O39
5096809 ..... 571820057MT ALTIN-MT .............. O39
5096860 ..... 571825018MT ALTIN-MT .............. O39
5096861 ..... 571825028MT ALTIN-MT .............. O39
5096862 ..... 571825038MT ALTIN-MT .............. O39
5096863 ..... 571825048MT ALTIN-MT .............. O39
5096864 ..... 571825058MT ALTIN-MT .............. O39
5123863 ..... RNGJ1204M0EML WP25PM .........M32
5123864 ..... RNGJ1204M0EML WU35PM .........M32
5123865 ..... RNGJ1204M0EML WP35CM .........M32
5123866 ..... RNGJ1204M0SMM WK15PM ........M32
5123867 ..... RNGJ1204M0SMM WP25PM ........M32
5123868 ..... RNGJ1204M0SMM WU35PM ........M32
5123869 ..... RNGJ1204M0SMM WP35CM ........M32
5123900 ..... RNGJ1204M0SMH WK15PM.........M33
5123901 ..... RNGJ1204M0SMH WP25PM.........M33
5123902 ..... RNGJ1204M0SMH WU35PM ........M33
5123903 ..... RNGJ1204M0SMH WP35CM ........M33
5143530 ..... GT315033 GP6520 ........................Y22
5143531 ..... GT315034 GP6520 ........................Y22
5143532 ..... GT315035 GP6520 ........................Y22
5176974 ..... RDPT1204M0SMMX TN6540 ........M87
5176975 ..... RDPT1204M0SMMX TN7535 ........M87
5201462 ..... DSM550 ....................................... H65
5201476 ..... HDWM5EU4DD ............................. H64
5201486 ..... HDWM5S ...................................... H65
5201519 ..... LS103 ........................................... H64
5202232 ..... SALS063 ....................................... H64
5202233 ..... SALS080 ....................................... H64
5202234 ..... SALS100 ....................................... H64
5202235 ..... SALS125 ....................................... H64
5202236 ..... SALS160 ....................................... H64
Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 62 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRANDO b 28 20153 09PM
Z63
widia.com
Index by Order Number
Order No. Catalogue No. Page(s)
5202514 ..... SWSM515 .................................... H64
5202515 ..... SWSM5155 .................................. H65
5209989 ..... M200D50Z04RN16.......................M36
5210210 ..... M200D52Z04RN16.......................M36
5210211 ..... M200D63Z04RN16.......................M36
5210212 ..... M200D63Z06RN16.......................M36
5210213 ..... M200D66Z05RN16.......................M36
5210214 ..... M200D80Z05RN16.......................M36
5210215 ..... M200D80Z07RN16.......................M36
5210216 ..... M200D100Z06RN16 ....................M36
5210217 ..... M200D100Z08RN16 ....................M36
5210218 ..... M200D125Z08RN16 ....................M36
5210273 ..... M200D25Z03M12RN10 ...............M20
5210274 ..... M200D32Z04M16RN10 ...............M20
5210275 ..... M200D35Z05M16RN10 ...............M20
5210276 ..... M200D42Z06M16RN10 ...............M20
5210277 ..... M200D25Z03B25RN10 ................M21
5210278 ..... M200D32Z04B32RN10 ................M21
5210279 ..... M200D25Z03A25RN10L150 ........M22
5210300 ..... M200D25Z03A25RN10L200 ........M22
5210301 ..... M200D25Z03A32RN10L250 ........M22
5210302 ..... M200D28Z03A25RN10L200 ........M22
5210303 ..... M200D32Z04A32RN10L150 ........M22
5210304 ..... M200D32Z03A32RN10L200 ........M22
5210305 ..... M200D40Z04RN10.......................M23
5210306 ..... M200D40Z06RN10.......................M23
5210307 ..... M200D50Z05RN10.......................M23
5210308 ..... M200D50Z06RN10.......................M23
5210309 ..... M200D52Z06RN10.......................M23
5274455 ..... RNGJ10T3M0EML WP35CM .........M24
5274456 ..... RNGJ10T3M0EML WP25PM .........M24
5274457 ..... RNGJ10T3M0EML WU35PM .........M24
5274511 ..... RNGJ10T3M0SMM WP25PM ........M24
5274512 ..... RNGJ10T3M0SMM WU35PM ........M24
5274560 ..... RNGJ1605M0EML WP35CM .........M37
5274561 ..... RNGJ1605M0EML WP25PM .........M37
5274562 ..... RNGJ1605M0EML WU35PM .........M37
5276196 ..... RNPJ10T3M0SMM WP35CM ........M25
5276197 ..... RNPJ10T3M0SMM WP25PM ........M25
5276198 ..... RNPJ10T3M0SMM WP20CM ........M25
5276199 ..... RNPJ10T3M0SMH WP35CM .........M25
5276240 ..... RNPJ10T3M0SMH WP25PM .........M25
5276241 ..... RNPJ10T3M0SMH WP20CM .........M25
5276243 ..... RNPJ10T3M0SMH WK15CM .........M25
5276360 ..... RNPJ1204M0SMM WP35CM ........M33
5276361 ..... RNPJ1204M0SMM WP25PM ........M33
5276362 ..... RNPJ1204M0SMM WP20CM ........M33
5276363 ..... RNPJ1204M0SMH WP35CM .........M33
5276364 ..... RNPJ1204M0SMH WP25PM .........M33
5276365 ..... RNPJ1204M0SMH WP20CM .........M33
5276366 ..... RNPJ1204M0SMH WK15CM .........M33
5276470 ..... RNPJ1605M0SMM WP35CM ........M38
5276471 ..... RNPJ1605M0SMM WP25PM ........M38
5276472 ..... RNPJ1605M0SMM WP20CM ........M38
5276473 ..... RNPJ1605M0SMH WP35CM .........M38
5276474 ..... RNPJ1605M0SMH WP25PM .........M38
5276475 ..... RNPJ1605M0SMH WP20CM .........M38
5276476 ..... RNPJ1605M0SMH WK15CM .........M38
5281790 ..... SDEX120408FRALP THM-U ............J46
5291300 ..... WMTS125I3P03PH WU25PT .........E19,
E23
5301400 ..... CNMG120408UR WS10PT ............ B43
5301402 ..... CNMG120408UR WS25PT ............ B43
5301413 ..... CNMG120412UR WS10PT ............ B43
5301414 ..... CNMG120412UM WS10PT ........... B42
5301416 ..... CNMG120412UR WS25PT ............ B43
5308173 ..... SNMG1906166P TN30P ............. B136
5323588 ..... 8S0SS ........................................... U42
5323612 ..... 8S1SL ........................................... U43
5323613 ..... 8S1SM .......................................... U42
5323614 ..... 8S1SS ........................................... U42
5323618 ..... 8S2SE ........................................... U43
5323619 ..... 8S2SL ........................................... U43
5323620 ..... 8S2SM .......................................... U42
5323624 ..... 8S2SS ........................................... U42
5324155 ..... 8S0SM .......................................... U42
5324156 ..... 8S0SL ........................................... U43
5324190 ..... 8S3SM .......................................... U42
5324191 ..... 8S4SS ........................................... U42
5327620 ..... WMTS250I6P03PH WU25PT .........E21,
E24
5327621 ..... WMTS250I6P08PH WU25PT .........E20,
E24
5331093 ..... WMTS125I3P08PH WU25PT .........E19,
E23
5331095 ..... WMTS188I5P03PH WU25PT .........E20,
E23
5331097 ..... WMTS188I5P08PH WU25PT .........E20,
E23
5338818 ..... WOEJ120712SRMH WP25PM .......M13
5338819 ..... WOEJ120712SRMH WU35PM .......M13
5338860 ..... WOEJ120712SRMH WK15CM ......M13
5338861 ..... WOEJ120712SRMH WP20CM ......M13
5338862 ..... WOEJ120712SRMH WP35CM ......M13
5338912 ..... M370D42Z03M16WO12 ..............M11
5338913 ..... M370D50Z04WO12 .....................M12
5338914 ..... M370D52Z04WO12 .....................M12
5338915 ..... M370D63Z04WO12 .....................M12
5338916 ..... M370D63Z05WO12 .....................M12
5338917 ..... M370D66Z05WO12 .....................M12
5338918 ..... M370D80Z05WO12 .....................M12
5338919 ..... M370D80Z06WO12 .....................M12
5338920 ..... M370D100Z06WO12 ...................M12
5338921 ..... M370D100Z07WO12 ...................M12
5338922 ..... M370D125Z07WO12 ...................M12
5338923 ..... M370D125Z09WO12 ...................M12
5345183 ..... CNMG190616UR WS10PT ............ B43
5345914 ..... WMTS125I3P03PH WU10PT .........E19,
E23
5345915 ..... WMTS125I3P08PH WU10PT .........E19,
E23
5345916 ..... WMTS156I4P03PH WU10PT .........E19,
E23
5345917 ..... WMTS156I4P03PH WU25PT .........E19,
E23
5345918 ..... WMTS156I4P08PH WU10PT .........E19,
E23
5345919 ..... WMTS156I4P08PH WU25PT .........E19,
E23
5345980 ..... WMTS188I5P03PH WU10PT .........E20,
E23
5345981 ..... WMTS188I5P08PH WU10PT .........E20,
E23
5345983 ..... WMTS250I6P03PH WU10PT .........E21,
E24
5345984 ..... WMTS250I6P08PH WU10PT .........E20,
E24
5345985 ..... WMTS312I8P03PH WU10PT .........E21,
E24
5345986 ..... WMTS312I8P03PH WU25PT .........E21,
E24
5345987 ..... WMTS312I8P08PH WU10PT .........E21,
E24
5345988 ..... WMTS312I8P08PH WU25PT .........E21,
E24
5346392 ..... WMTS305M3U03PH WU10PT ........E22
5346393 ..... WMTS305M3U03PH WU25PT ........E22
5346394 ..... WMTS305M3U06PH WU10PT ........E22
5346395 ..... WMTS305M3U06PH WU25PT ........E22
5346396 ..... WMTS405M4U03PH WU10PT ........E22
5346397 ..... WMTS405M4U03PH WU25PT ........E22
5346398 ..... WMTS405M4U06PH WU10PT ........E22
5346399 ..... WMTS405M4U06PH WU25PT ........E22
5346400 ..... WMTS505M5U03PH WU10PT ........E22
5346401 ..... WMTS505M5U03PH WU25PT ........E22
5346402 ..... WMTS505M5U06PH WU10PT ........E22
5346403 ..... WMTS505M5U06PH WU25PT ........E22
5346404 ..... WMTS605M6U03PH WU10PT ........E22
5346405 ..... WMTS605M6U03PH WU25PT ........E22
5346406 ..... WMTS605M6U06PH WU10PT ........E22
5346407 ..... WMTS605M6U06PH WU25PT ........E22
5346408 ..... WMTS805M8U06PH WU10PT ........E22
5346409 ..... WMTS805M8U06PH WU25PT ........E22
5346410 ..... WMTS805M8U03PH WU10PT ........E22
5346411 ..... WMTS805M8U03PH WU25PT ........E22
5346412 ..... WMTS300M3P03PH WU10PT .......E19,
E23
5346413 ..... WMTS300M3P03PH WU25PT .......E19,
E23
5346414 ..... WMTS300M3P03PH WU10HT .......E19,
E23
5346415 ..... WMTS300M3P06PH WU10PT .......E19,
E23
5346416 ..... WMTS300M3P06PH WU25PT .......E19,
E23
5346417 ..... WMTS300M3P06PH WU10HT .......E19,
E23
5346418 ..... WMTS400M4P03PH WU10PT .......E19,
E23
5346419 ..... WMTS400M4P03PH WU25PT .......E19,
E23
5346420 ..... WMTS400M4P03PH WU10HT .......E19,
E23
5346421 ..... WMTS400M4P06PH WU10PT .......E19,
E23
5346422 ..... WMTS400M4P06PH WU25PT .......E19,
E23
5346423 ..... WMTS400M4P06PH WU10HT .......E19,
E23
5346424 ..... WMTS500M5P03PH WU10PT .......E20,
E24
5346425 ..... WMTS500M5P03PH WU25PT .......E20,
E24
5346426 ..... WMTS500M5P03PH WU10HT .......E20,
E24
5346427 ..... WMTS500M5P06PH WU10PT .......E20,
E24
5346428 ..... WMTS500M5P06PH WU25PT .......E20,
E24
5346429 ..... WMTS500M5P06PH WU10HT .......E20,
E24
5346430 ..... WMTS600M6P03PH WU10PT .......E20,
E24
5346431 ..... WMTS600M6P03PH WU25PT .......E20,
E24
5346432 ..... WMTS600M6P06PH WU10PT .......E20,
E24
5346433 ..... WMTS600M6P06PH WU25PT .......E20,
E24
5346434 ..... WMTS800M8P06PH WU10PT .......E21,
E24
5346435 ..... WMTS800M8P06PH WU25PT .......E21,
E24
5346436 ..... WMTS800M8P03PH WU10PT .......E21,
E24
5346437 ..... WMTS800M8P03PH WU25PT .......E21,
E24
5349625 ..... WGMSL1620 W .............................E36
5349626 ..... WGMSL2020 W .............................E36
5349627 ..... WGMSL2525 W .............................E36
5349628 ..... WGMSR2020 W .............................E36
5349629 ..... WGMSR2525 W .............................E36
5349640 ..... WGMSL3232 W .............................E36
5349641 ..... WGMSR3232 W .............................E36
5358407 ..... SDR100031E0W4 WDN00U .......... H66
5358408 ..... SDR100031E1W4 WDN00U .......... H66
5358409 ..... SDR100093E1W4 WDN00U .......... H66
5358450 ..... SDR100031E0NW WDN00U .......... H66
5358451 ..... SDR102 WDN00U ......................... H66
5358452 ..... EDR100031E1W4 WDN00U .......... H66
5359116 ..... CNMG1204044P TN20P ............. B126
5359117 ..... CNMG1204044P TN10U ............. B126
5359118 ..... CNMG1204084P TN20P ............. B126
5359119 ..... CNMG1204084P TN10U ............. B126
5359120 ..... WMTWGML114S W .......................E38
5359121 ..... WMTWGML213S W .......................E38
5359122 ..... WMTWGML2B16S W .....................E38
5359123 ..... WMTWGML319S W .......................E38
5359124 ..... WMTWGML419S W .......................E38
5359125 ..... WMTWGML522S W .......................E38
5359126 ..... WMTWGML622S W .......................E38
5359127 ..... WMTWGMR114S W .......................E38
5359128 ..... WMTWGMR213S W .......................E38
5359129 ..... WMTWGMR2B16S W .....................E38
5359130 ..... WMTWGMR319S W .......................E38
5359131 ..... WMTWGMR419S W .......................E38
5359132 ..... WMTWGMR522S W .......................E38
5359133 ..... WMTWGMR622S W .......................E38
5359134 ..... WMTWGML313B038-052 W .........E39
5359135 ..... WMTWGML316B052-070 W .........E39
5359136 ..... WMTWGML316B070-100 W .........E39
5359137 ..... WMTWGML319100-205 W ............E39
5359138 ..... WMTWGML413B038-052 W .........E39
5359139 ..... WMTWGML416B052-070 W .........E39
5359140 ..... WMTWGML416B070-100 W .........E39
5359141 ..... WMTWGML419B100-205 W .........E39
5359142 ..... WMTWGML516B038-052 W .........E39
5359143 ..... WMTWGML519B052-070 W .........E39
5359144 ..... WMTWGML519B070-100 W .........E39
5359145 ..... WMTWGML522B100-205 W .........E39
5359146 ..... WMTWGML616B030-052 W .........E39
5359147 ..... WMTWGML619B052-070 W .........E39
5359148 ..... WMTWGML619B070-100 W .........E39
5359149 ..... WMTWGML622B100-205 W .........E39
5359150 ..... WMTWGMR313B038-052 W .........E39
5359151 ..... WMTWGMR316B052-070 W .........E39
5359152 ..... WMTWGMR316B070-100 W .........E39
5359153 ..... WMTWGMR319B100-205 W .........E39
5359154 ..... WMTWGMR416B052-070 W .........E39
5359155 ..... WMTWGMR416B070-100 W .........E39
5359156 ..... WMTWGMR419B100-205 W .........E39
5359157 ..... WMTWGMR522B100-205 W .........E39
5359158 ..... WMTWGMR622B100-205 W .........E39
Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 63 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRAND O b 28 2015 3 09 PM
Z64 widia.com
Index by Order Number
Order No. Catalogue No. Page(s)
5359240 ..... CNMG1204124P TN20P ............. B126
5359241 ..... CNMG1204124P TN10U ............. B126
5359242 ..... DNMG1504084P TN20P ............. B131
5359243 ..... DNMG1504084P TN10U ............. B131
5359244 ..... DNMG1506044P TN20P ............. B131
5359245 ..... DNMG1506084P TN20P ............. B131
5359246 ..... TNMG1604044P TN20P .............. B141
5359247 ..... TNMG1604084P TN20P .............. B141
5359248 ..... TNMG2204044P TN20P .............. B141
5359249 ..... TNMG2204084P TN20P .............. B141
5359250 ..... TNMG2204124P TN20P .............. B141
5359251 ..... VNMG1604044P TN20P.............. B146
5359252 ..... VNMG1604044P TN10U ............. B146
5359253 ..... VNMG1604084P TN20P.............. B146
5359254 ..... VNMG1604084P TN10U ............. B146
5359255 ..... WNMG0804084P TN20P ............ B148
5359256 ..... WNMG0804084P TN10U ............ B148
5363208 ..... SF06306RH W .............................. H64
5363209 ..... SF08008RH W .............................. H64
5363220 ..... SF10012RH W .............................. H64
5363221 ..... SF12515RH W .............................. H64
5363222 ..... SF16018RH W .............................. H64
5363223 ..... SF20024RH W .............................. H64
5363252 ..... WSSEM02502RH W ...................... H65
5363253 ..... WSSEM03203RH W ...................... H65
5363254 ..... WSSEM04004RH W ...................... H65
5363255 ..... WSSEM05005RH W ...................... H65
5366646 ..... VTSPO6505 WU41EG .....................Y14
5366647 ..... VTSPO6505 WP42EG .....................Y14
5366648 ..... VTSPO6505 WP49EG .....................Y14
5366649 ..... VTSPO6505 WU40EG .....................Y14
5366660 ..... VTSPO6506 WP49EG .....................Y14
5366661 ..... VTSPO6507 WP49EG .....................Y14
5366662 ..... VTSPO6508 WU41EG .....................Y14
5366663 ..... VTSPO6508 WP49EG .....................Y14
5366664 ..... VTSPO6508 WU40EG .....................Y14
5366665 ..... VTSPO6509 WP49EG .....................Y14
5366666 ..... VTSPO6510 WU41EG .....................Y14
5366667 ..... VTSPO6510 WP42EG .....................Y14
5366668 ..... VTSPO6510 WP49EG .....................Y14
5366669 ..... VTSPO6510 WU40EG .....................Y14
5366670 ..... VTSPO6511 WP49EG .....................Y14
5366671 ..... VTSPO6512 WU41EG .....................Y14
5366673 ..... VTSPO6512 WP49EG .....................Y14
5366674 ..... VTSPO6512 WU40EG .....................Y14
5366675 ..... VTSPO6513 WU41EG .....................Y14
5366676 ..... VTSPO6513 WP42EG .....................Y14
5366677 ..... VTSPO6513 WP49EG .....................Y14
5366678 ..... VTSPO6513 WU40EG .....................Y14
5366679 ..... VTSPO6514 WP49EG .....................Y14
5366680 ..... VTSPO6515 WU41EG .....................Y14
5366681 ..... VTSPO6515 WP42EG .....................Y14
5366682 ..... VTSPO6515 WP49EG .....................Y14
5366684 ..... VTSPO6515 WU40EG .....................Y14
5366685 ..... VTSPO6516 WP49EG .....................Y14
5366686 ..... VTSPO6517 WU41EG .....................Y14
5366687 ..... VTSPO6517 WP42EG .....................Y14
5366688 ..... VTSPO6517 WP49EG .....................Y14
5366689 ..... VTSPO6517 WU40EG .....................Y14
5366690 ..... VTSPO6518 WP49EG .....................Y14
5366692 ..... VTSPO6519 WU41EG .....................Y15
5366693 ..... VTSPO6519 WP42EG .....................Y15
5366695 ..... VTSPO6519 WP49EG .....................Y15
5366696 ..... VTSPO6519 WU40EG .....................Y15
5366697 ..... VTSPO6520 WP49EG .....................Y15
5366698 ..... VTSPO6521 WU41EG .....................Y15
5366700 ..... VTSPO6521 WP42EG .....................Y15
5366701 ..... VTSPO6521 WP49EG .....................Y15
5366703 ..... VTSPO6521 WU40EG .....................Y15
5366704 ..... VTSPO6522 WP49EG .....................Y15
5366705 ..... VTSPO6523 WU41EG .....................Y15
5366706 ..... VTSPO6523 WP42EG .....................Y15
5366707 ..... VTSPO6523 WP49EG .....................Y15
5366708 ..... VTSPO6523 WU40EG .....................Y15
5366709 ..... VTSPO6524 WP49EG .....................Y15
5368514 ..... VTSPO6525 WU41EG .....................Y14
5368515 ..... VTSPO6525 WP49EG .....................Y14
5368516 ..... VTSPO6525 WU40EG .....................Y14
5368517 ..... VTSPO6526 WU41EG .....................Y14
5368518 ..... VTSPO6526 WP49EG .....................Y14
5368519 ..... VTSPO6526 WU40EG .....................Y14
5368540 ..... VTSPO6527 WU41EG .....................Y14
5368541 ..... VTSPO6527 WP49EG .....................Y14
5368542 ..... VTSPO6527 WU40EG .....................Y14
5368543 ..... VTSPO6528 WU41EG .....................Y14
5368544 ..... VTSPO6528 WP49EG .....................Y14
5368545 ..... VTSPO6528 WU40EG .....................Y14
5368546 ..... VTSPO6529 WU41EG .....................Y15
5368547 ..... VTSPO6529 WP49EG .....................Y15
5368548 ..... VTSPO6529 WU40EG .....................Y15
5368549 ..... VTSPO6530 WU41EG .....................Y15
5368550 ..... VTSPO6530 WP49EG .....................Y15
5368551 ..... VTSPO6530 WU40EG .....................Y15
5368552 ..... VTSPO6531 WU41EG .....................Y15
5368553 ..... VTSPO6531 WP42EG .....................Y15
5368554 ..... VTSPO6531 WP49EG .....................Y15
5368555 ..... VTSPO6531 WU40EG .....................Y15
5368556 ..... VTSPO6532 WP49EG .....................Y15
5368557 ..... VTSPO6533 WU41EG .....................Y15
5368558 ..... VTSPO6533 WP42EG .....................Y15
5368559 ..... VTSPO6533 WP49EG .....................Y15
5368560 ..... VTSPO6533 WU40EG .....................Y15
5368561 ..... VTSPO6534 WP49EG .....................Y15
5368562 ..... VTSPO6535 WU41EG .....................Y15
5368563 ..... VTSPO6535 WP42EG .....................Y15
5368565 ..... VTSPO6535 WP49EG .....................Y15
5368566 ..... VTSPO6535 WU40EG .....................Y15
5368567 ..... VTSPO6536 WP49EG .....................Y15
5368568 ..... VTSPO6537 WU41EG .....................Y15
5368569 ..... VTSPO6537 WP42EG .....................Y15
5368570 ..... VTSPO6537 WP49EG .....................Y15
5368571 ..... VTSPO6537 WU40EG .....................Y15
5368572 ..... VTSPO6538 WU41EG .....................Y15
5368573 ..... VTSPO6538 WP42EG .....................Y15
5368574 ..... VTSPO6538 WP49EG .....................Y15
5368575 ..... VTSPO6538 WU40EG .....................Y15
5368576 ..... VTSPO6539 WU41EG .....................Y16
5368577 ..... VTSPO6539 WP42EG .....................Y16
5368578 ..... VTSPO6539 WP49EG .....................Y16
5368579 ..... VTSPO6539 WU40EG .....................Y16
5368580 ..... VTSPO6540 WU41EG .....................Y16
5368581 ..... VTSPO6540 WP42EG .....................Y16
5368582 ..... VTSPO6540 WP49EG .....................Y16
5368583 ..... VTSPO6540 WU40EG .....................Y16
5368584 ..... VTSPO6541 WU41EG .....................Y16
5368585 ..... VTSPO6541 WP49EG .....................Y16
5368586 ..... VTSPO6541 WU40EG .....................Y16
5368587 ..... VTSPO6542 WU41EG .....................Y16
5368588 ..... VTSPO6542 WP49EG .....................Y16
5368589 ..... VTSPO6542 WU40EG .....................Y16
5368600 ..... VTSPO6543 WP49EG .....................Y16
5368601 ..... VTSPO6544 WP49EG .....................Y16
5368602 ..... VTSPO6545 WP49EG .....................Y14
5368603 ..... VTSPO6545 WU40EG .....................Y14
5368604 ..... VTSPO6546 WP49EG .....................Y14
5368605 ..... VTSPO6546 WU40EG .....................Y14
5368606 ..... VTSPO6547 WP49EG .....................Y14
5368607 ..... VTSPO6547 WU40EG .....................Y14
5368608 ..... VTSPO6548 WP49EG .....................Y14
5368609 ..... VTSPO6548 WU40EG .....................Y14
5368610 ..... VTSPO6549 WP49EG .....................Y14
5368611 ..... VTSPO6549 WU40EG .....................Y14
5368612 ..... VTSPO6550 WP49EG .....................Y14
5368613 ..... VTSPO6550 WU40EG .....................Y14
5368614 ..... VTSPO6551 WP49EG .....................Y15
5368615 ..... VTSPO6551 WU40EG .....................Y15
5368616 ..... VTSPO6552 WP49EG .....................Y15
5368617 ..... VTSPO6552 WU40EG .....................Y15
5368618 ..... VTSPO6553 WP49EG .....................Y15
5368619 ..... VTSPO6553 WU40EG .....................Y15
5368620 ..... VTSPO6554 WP49EG .....................Y15
5368621 ..... VTSPO6554 WU40EG .....................Y15
5368622 ..... VTSPO6555 WP49EG .....................Y15
5368623 ..... VTSPO6555 WU40EG .....................Y15
5368624 ..... VTSPO6556 WP49EG .....................Y15
5368625 ..... VTSPO6556 WU40EG .....................Y15
5368626 ..... VTSPO6557 WP49EG .....................Y15
5368627 ..... VTSPO6557 WU40EG .....................Y15
5368628 ..... VTSPO6558 WP49EG .....................Y15
5368629 ..... VTSPO6558 WU40EG .....................Y15
5368630 ..... VTSPO6559 WP49EG .....................Y15
5368631 ..... VTSPO6559 WU40EG .....................Y15
5368632 ..... VTSPO6560 WP49EG .....................Y15
5368633 ..... VTSPO6560 WU40EG .....................Y15
5368634 ..... VTSPO6561 WP49EG .....................Y15
5368635 ..... VTSPO6561 WU40EG .....................Y15
5368636 ..... VTSPO6562 WP49EG .....................Y15
5368637 ..... VTSPO6562 WU40EG .....................Y15
5368638 ..... VTSPO6563 WP49EG .....................Y15
5368639 ..... VTSPO6563 WU40EG .....................Y15
5368640 ..... VTSPO6564 WP49EG .....................Y15
5368641 ..... VTSPO6564 WU40EG .....................Y15
5368642 ..... VTSPO6565 WP49EG .....................Y15
5368643 ..... VTSPO6565 WU40EG .....................Y15
5368683 ..... VTSPO6566 WP49EG .....................Y15
5368684 ..... VTSPO6566 WU40EG .....................Y15
5368685 ..... VTSPO6567 WP49EG .....................Y15
5368686 ..... VTSPO6567 WU40EG .....................Y15
5368687 ..... VTSPO6568 WP49EG .....................Y15
5368688 ..... VTSPO6568 WU40EG .....................Y15
5368689 ..... VTSPO6569 WP49EG .....................Y15
5368690 ..... VTSPO6569 WU40EG .....................Y15
5368691 ..... VTSPO6570 WP49EG .....................Y15
5368692 ..... VTSPO6570 WU40EG .....................Y15
5368693 ..... VTSPO6571 WP49EG .....................Y16
5368694 ..... VTSPO6571 WU40EG .....................Y16
5368695 ..... VTSPO6572 WU40EG .....................Y16
5368696 ..... VTSPO6573 WP49EG .....................Y16
5368697 ..... VTSPO6573 WU40EG .....................Y16
5368698 ..... VTSPO6574 WU40EG .....................Y16
5368699 ..... VTSPO6575 WU40EG .....................Y16
5368702 ..... VTSFT6506 WU41EG .....................Y38
5368703 ..... VTSFT6506 WP42EG......................Y38
5368704 ..... VTSFT6506 WP49EG......................Y38
5368705 ..... VTSFT6506 WU40EG .....................Y38
5368706 ..... VTSFT6507 WP49EG......................Y38
5368707 ..... VTSFT6508 WP49EG......................Y38
5368708 ..... VTSFT6509 WU41EG .....................Y38
5368709 ..... VTSFT6509 WP49EG......................Y38
5368720 ..... VTSFT6509 WU40EG .....................Y38
5368721 ..... VTSFT6510 WP49EG......................Y38
5368722 ..... VTSFT6511 WU41EG .....................Y38
5368723 ..... VTSFT6511 WP42EG......................Y38
5368724 ..... VTSFT6511 WP49EG......................Y38
5368725 ..... VTSFT6511 WU40EG .....................Y38
5368726 ..... VTSFT6512 WP49EG......................Y38
5368727 ..... VTSFT6513 WU41EG .....................Y38
5368728 ..... VTSFT6513 WP49EG......................Y38
5368729 ..... VTSFT6513 WU40EG .....................Y38
5368730 ..... VTSFT6514 WU41EG .....................Y38
5368731 ..... VTSFT6514 WP42EG......................Y38
5368732 ..... VTSFT6514 WP49EG......................Y38
5368733 ..... VTSFT6514 WU40EG .....................Y38
5368734 ..... VTSFT6515 WP49EG......................Y38
5368735 ..... VTSFT6516 WU41EG .....................Y38
5368736 ..... VTSFT6516 WP42EG......................Y38
5368737 ..... VTSFT6516 WP49EG......................Y38
5368738 ..... VTSFT6516 WU40EG .....................Y38
5368739 ..... VTSFT6517 WP49EG......................Y38
5368740 ..... VTSFT6518 WU41EG .....................Y39
5368741 ..... VTSFT6518 WP42EG......................Y39
5368742 ..... VTSFT6518 WP49EG......................Y39
5368743 ..... VTSFT6518 WU40EG .....................Y39
5368744 ..... VTSFT6519 WP49EG......................Y39
5368745 ..... VTSFT6520 WP49EG......................Y39
5368746 ..... VTSFT6520 WU40EG .....................Y39
5368748 ..... VTSFT6521 WU41EG .....................Y39
5368749 ..... VTSFT6521 WP42EG......................Y39
5368750 ..... VTSFT6521 WP49EG......................Y39
5368751 ..... VTSFT6521 WU40EG .....................Y39
5368752 ..... VTSFT6522 WP49EG......................Y39
5368753 ..... VTSFT6523 WU41EG .....................Y39
5368754 ..... VTSFT6523 WP42EG......................Y39
5368755 ..... VTSFT6523 WP49EG......................Y39
5368756 ..... VTSFT6523 WU40EG .....................Y39
5368757 ..... VTSFT6524 WP49EG......................Y39
5387434 ..... VTSFT6574 WP42EG......................Y41
5387435 ..... VTSFT6574 WP49EG......................Y41
5387436 ..... VTSFT6575 WP42EG......................Y41
5387437 ..... VTSFT6575 WP49EG......................Y41
5387438 ..... VTSFT6576 WP42EG......................Y41
5387439 ..... VTSFT6576 WP49EG......................Y41
5387460 ..... VTSFT6577 WP42EG......................Y41
5387461 ..... VTSFT6577 WP49EG......................Y41
5387462 ..... VTSFT6578 WP42EG......................Y41
5387463 ..... VTSFT6578 WP49EG......................Y41
5387464 ..... VTSFT6579 WP42EG......................Y41
5387465 ..... VTSFT6579 WP49EG......................Y41
5387466 ..... VTSFT6580 WP42EG......................Y41
5387467 ..... VTSFT6580 WP49EG......................Y41
5387468 ..... VTSFT6581 WP42EG......................Y41
5387469 ..... VTSFT6581 WP49EG......................Y41
5387470 ..... VTSFT6582 WP49EG......................Y41
5387471 ..... VTSFT6583 WP42EG......................Y41
5387472 ..... VTSFT6583 WP49EG......................Y41
5387473 ..... VTSFT6584 WP42EG......................Y41
5387474 ..... VTSFT6584 WP49EG......................Y41
5387475 ..... VTSFT6585 WP42EG......................Y41
5387476 ..... VTSFT6585 WP49EG......................Y41
5387477 ..... VTSFT6586 WP42EG......................Y41
5387478 ..... VTSFT6586 WP49EG......................Y41
5387479 ..... VTSFT6587 WP42EG......................Y41
5387481 ..... VTSFT6587 WP49EG......................Y41
5387482 ..... VTSFT6588 WP42EG......................Y41
Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 64 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRANDO b 28 20153 09PM
Z65
widia.com
Index by Order Number
Order No. Catalogue No. Page(s)
5387483 ..... VTSFT6588 WP49EG......................Y41
5387487 ..... VTSFT6005 WP49EG......................Y35
5387488 ..... VTSFT6006 WP49EG......................Y37
5387489 ..... VTSFT6007 WP49EG......................Y35
5387640 ..... VTSFT6008 WP49EG......................Y35
5387641 ..... VTSFT6009 WP49EG......................Y37
5387642 ..... VTSFT6010 WP49EG......................Y35
5387643 ..... VTSFT6011 WP49EG......................Y35
5387644 ..... VTSFT6012 WP49EG......................Y37
5387645 ..... VTSFT6013 WP49EG......................Y35
5387646 ..... VTSFT6014 WP49EG......................Y35
5387647 ..... VTSFT6015 WP49EG......................Y37
5387648 ..... VTSFT6016 WP49EG......................Y35
5387649 ..... VTSFT6017 WP49EG......................Y35
5387650 ..... VTSFT6018 WP49EG......................Y37
5387651 ..... VTSFT6019 WP49EG......................Y35
5387652 ..... VTSFT6020 WP49EG......................Y35
5387653 ..... VTSFT6021 WP49EG......................Y37
5387654 ..... VTSFT6022 WP49EG......................Y35
5387655 ..... VTSFT6023 WP49EG......................Y35
5387656 ..... VTSFT6024 WP49EG......................Y37
5387657 ..... VTSFT6025 WP49EG......................Y35
5387658 ..... VTSFT6026 WP49EG......................Y35
5387659 ..... VTSFT6027 WP49EG......................Y37
5387670 ..... VTSFT6028 WP49EG......................Y35
5387671 ..... VTSFT6029 WP49EG......................Y35
5387672 ..... VTSFT6030 WP49EG......................Y37
5387673 ..... VTSFT6031 WP49EG......................Y35
5387674 ..... VTSFT6032 WP49EG......................Y35
5387675 ..... VTSFT6033 WP49EG......................Y35
5387676 ..... VTSFT6034 WP49EG......................Y36
5387677 ..... VTSFT6035 WP49EG......................Y36
5387678 ..... VTSFT6036 WP49EG......................Y36
5387679 ..... VTSFT6037 WP49EG......................Y36
5387700 ..... VTSFT6038 WP49EG......................Y36
5387701 ..... VTSFT6039 WP49EG......................Y36
5387702 ..... VTSFT6040 WP49EG......................Y36
5387704 ..... VTSPO6005 WP49EG .....................Y11
5387705 ..... VTSPO6006 WP49EG .....................Y13
5387707 ..... VTSPO6007 WP49EG .....................Y11
5387708 ..... VTSPO6008 WP49EG .....................Y11
5387709 ..... VTSPO6009 WP49EG .....................Y13
5387760 ..... VTSPO6010 WP49EG .....................Y11
5387761 ..... VTSPO6011 WP49EG .....................Y11
5387762 ..... VTSPO6012 WP49EG .....................Y13
5387763 ..... VTSPO6013 WP49EG .....................Y11
5387764 ..... VTSPO6014 WP49EG .....................Y11
5387765 ..... VTSPO6015 WP49EG .....................Y13
5387766 ..... VTSPO6016 WP49EG .....................Y11
5387767 ..... VTSPO6017 WP49EG .....................Y11
5387768 ..... VTSPO6018 WP49EG .....................Y13
5387769 ..... VTSPO6019 WP49EG .....................Y11
5387770 ..... VTSPO6020 WP49EG .....................Y11
5387771 ..... VTSPO6021 WP49EG .....................Y13
5387772 ..... VTSPO6022 WP49EG .....................Y11
5387773 ..... VTSPO6023 WP49EG .....................Y11
5387774 ..... VTSPO6024 WP49EG .....................Y13
5387776 ..... VTSPO6025 WP49EG .....................Y11
5387777 ..... VTSPO6026 WP49EG .....................Y11
5387778 ..... VTSPO6027 WP49EG .....................Y13
5387779 ..... VTSPO6028 WP49EG .....................Y11
5387780 ..... VTSPO6029 WP49EG .....................Y11
5387781 ..... VTSPO6030 WP49EG .....................Y13
5387782 ..... VTSPO6031 WP49EG .....................Y11
5387783 ..... VTSPO6032 WP49EG .....................Y11
5387784 ..... VTSPO6033 WP49EG .....................Y11
5387785 ..... VTSPO6034 WP49EG .....................Y12
5387786 ..... VTSPO6035 WP49EG .....................Y12
5387787 ..... VTSPO6036 WP49EG .....................Y12
5387788 ..... VTSPO6037 WP49EG .....................Y12
5387789 ..... VTSPO6038 WP49EG .....................Y12
5387790 ..... VTSPO6039 WP49EG .....................Y12
5387791 ..... VTSPO6040 WP49EG .....................Y12
5387859 ..... VTSPO7505 WU40EG .....................Y17
5387861 ..... VTSPO7505 WU41EG .....................Y17
5387863 ..... VTSPO7506 WU40EG .....................Y17
5387865 ..... VTSPO7506 WU41EG .....................Y17
5387867 ..... VTSPO7507 WU40EG .....................Y17
5387869 ..... VTSPO7507 WU41EG .....................Y17
5387871 ..... VTSPO7508 WU40EG .....................Y17
5387873 ..... VTSPO7508 WU41EG .....................Y17
5387875 ..... VTSPO7509 WU40EG .....................Y17
5387877 ..... VTSPO7509 WU41EG .....................Y17
5387879 ..... VTSPO7510 WU40EG .....................Y17
5387881 ..... VTSPO7510 WU41EG .....................Y17
5387883 ..... VTSPO7511 WU40EG .....................Y17
5387885 ..... VTSPO7512 WU40EG .....................Y17
5387887 ..... VTSPO7513 WU40EG .....................Y17
5387889 ..... VTSPO7514 WU40EG .....................Y17
5387891 ..... VTSPO7515 WU40EG .....................Y17
5387893 ..... VTSPO7516 WU40EG .....................Y17
5387895 ..... VTSPO7517 WU40EG .....................Y17
5387898 ..... VTSPO7518 WU40EG .....................Y17
5387900 ..... VTSPO7519 WU40EG .....................Y17
5398708 ..... VTSFT7505 WU40EG .....................Y42
5398709 ..... VTSFT7505 WU41EG .....................Y42
5398790 ..... VTSFT7506 WU40EG .....................Y42
5398791 ..... VTSFT7506 WU41EG .....................Y42
5398792 ..... VTSFT7507 WU40EG .....................Y42
5398793 ..... VTSFT7507 WU41EG .....................Y42
5398794 ..... VTSFT7508 WU40EG .....................Y42
5398795 ..... VTSFT7508 WU41EG .....................Y42
5398796 ..... VTSFT7509 WU40EG .....................Y42
5398797 ..... VTSFT7509 WU41EG .....................Y42
5398798 ..... VTSFT7510 WU40EG .....................Y42
5398799 ..... VTSFT7510 WU41EG .....................Y42
5398800 ..... VTSFT7511 WU40EG .....................Y42
5398801 ..... VTSFT7512 WU40EG .....................Y42
5398802 ..... VTSFT7513 WU40EG .....................Y42
5398803 ..... VTSFT7514 WU40EG .....................Y42
5398804 ..... VTSFT7515 WU40EG .....................Y42
5398805 ..... VTSFT7516 WU40EG .....................Y42
5398806 ..... VTSFT7517 WU40EG .....................Y42
5398807 ..... VTSFT7518 WU40EG .....................Y42
5398808 ..... VTSFT7519 WU40EG .....................Y42
5402138 ..... VTSFT6545 WP49EG......................Y38
5402139 ..... VTSFT6546 WP49EG......................Y38
5402180 ..... VTSFT6546 WU40EG .....................Y38
5402181 ..... VTSFT6547 WP49EG......................Y38
5402182 ..... VTSFT6547 WU40EG .....................Y38
5402183 ..... VTSFT6548 WP49EG......................Y38
5402184 ..... VTSFT6549 WU40EG .....................Y38
5402185 ..... VTSFT6549 WP49EG......................Y38
5402186 ..... VTSFT6550 WP49EG......................Y39
5402187 ..... VTSFT6550 WU40EG .....................Y39
5402188 ..... VTSFT6551 WP42EG......................Y39
5402189 ..... VTSFT6551 WP49EG......................Y39
5402190 ..... VTSFT6551 WU40EG .....................Y39
5402191 ..... VTSFT6552 WU40EG .....................Y39
5402192 ..... VTSFT6553 WP49EG......................Y39
5402193 ..... VTSFT6553 WU40EG .....................Y39
5402194 ..... VTSFT6554 WP42EG......................Y39
5402195 ..... VTSFT6554 WP49EG......................Y39
5402196 ..... VTSFT6554 WU40EG .....................Y39
5402197 ..... VTSFT6555 WP49EG......................Y39
5402198 ..... VTSFT6555 WU40EG .....................Y39
5402199 ..... VTSFT6556 WP49EG......................Y39
5402200 ..... VTSFT6556 WU40EG .....................Y39
5402201 ..... VTSFT6557 WP42EG......................Y39
5402202 ..... VTSFT6557 WP49EG......................Y39
5402203 ..... VTSFT6557 WU40EG .....................Y39
5402204 ..... VTSFT6558 WU40EG .....................Y39
5402205 ..... VTSFT6559 WU40EG .....................Y39
5402206 ..... VTSFT6560 WP42EG......................Y39
5402207 ..... VTSFT6560 WP49EG......................Y39
5402208 ..... VTSFT6560 WU40EG .....................Y39
5402209 ..... VTSFT6561 WU40EG .....................Y39
5402210 ..... VTSFT6562 WP49EG......................Y39
5402211 ..... VTSFT6562 WU40EG .....................Y39
5402212 ..... VTSFT6563 WU40EG .....................Y39
5402213 ..... VTSFT6564 WU40EG .....................Y39
5402214 ..... VTSFT6564 WP49EG......................Y39
5402215 ..... VTSFT6565 WU40EG .....................Y39
5402216 ..... VTSFT6566 WU40EG .....................Y39
5402217 ..... VTSFT6567 WP49EG......................Y39
5402218 ..... VTSFT6567 WU40EG .....................Y39
5402219 ..... VTSFT6568 WU40EG .....................Y39
5402220 ..... VTSFT6569 WP49EG......................Y39
5402221 ..... VTSFT6569 WU40EG .....................Y39
5402222 ..... VTSFT6570 WU40EG .....................Y39
5402223 ..... VTSFT6571 WP49EG......................Y40
5402224 ..... VTSFT6571 WU40EG .....................Y40
5402225 ..... VTSFT6572 WU40EG .....................Y40
5402226 ..... VTSFT6573 WU40EG .....................Y40
5402227 ..... VTSFT6525 WP49EG......................Y38
5402228 ..... VTSFT6525 WU40EG .....................Y38
5402229 ..... VTSFT6526 WP49EG......................Y38
5402250 ..... VTSFT6526 WU40EG .....................Y38
5402251 ..... VTSFT6527 WP49EG......................Y38
5402252 ..... VTSFT6527 WU40EG .....................Y38
5402253 ..... VTSFT6528 WP49EG......................Y39
5402254 ..... VTSFT6528 WU40EG .....................Y39
5402255 ..... VTSFT6529 WP49EG......................Y39
5402256 ..... VTSFT6529 WU40EG .....................Y39
5402257 ..... VTSFT6530 WP49EG......................Y39
5402258 ..... VTSFT6530 WU40EG .....................Y39
5402259 ..... VTSFT6531 WU41EG .....................Y39
5402260 ..... VTSFT6531 WP42EG......................Y39
5402261 ..... VTSFT6531 WP49EG......................Y39
5402262 ..... VTSFT6531 WU40EG .....................Y39
5402263 ..... VTSFT6532 WP49EG......................Y39
5402264 ..... VTSFT6533 WU41EG .....................Y39
5402265 ..... VTSFT6533 WP42EG......................Y39
5402266 ..... VTSFT6533 WP49EG......................Y39
5402267 ..... VTSFT6533 WU40EG .....................Y39
5402268 ..... VTSFT6534 WP49EG......................Y39
5402269 ..... VTSFT6535 WU41EG .....................Y39
5402270 ..... VTSFT6535 WP49EG......................Y39
5402271 ..... VTSFT6535 WU40EG .....................Y39
5402272 ..... VTSFT6536 WP49EG......................Y39
5402273 ..... VTSFT6537 WU41EG .....................Y39
5402274 ..... VTSFT6537 WP49EG......................Y39
5402275 ..... VTSFT6537 WU40EG .....................Y39
5402276 ..... VTSFT6538 WU41EG .....................Y39
5402277 ..... VTSFT6538 WP49EG......................Y39
5402278 ..... VTSFT6538 WU40EG .....................Y39
5402279 ..... VTSFT6539 WU41EG .....................Y39
5402280 ..... VTSFT6539 WP49EG......................Y39
5402281 ..... VTSFT6539 WU40EG .....................Y39
5402282 ..... VTSFT6540 WU41EG .....................Y40
5402283 ..... VTSFT6540 WP49EG......................Y40
5402284 ..... VTSFT6540 WU40EG .....................Y40
5402285 ..... VTSFT6541 WU41EG .....................Y40
5402286 ..... VTSFT6541 WP49EG......................Y40
5402287 ..... VTSFT6541 WU40EG .....................Y40
5402288 ..... VTSFT6542 WU41EG .....................Y40
5402289 ..... VTSFT6542 WP49EG......................Y40
5402290 ..... VTSFT6542 WU40EG .....................Y40
5402291 ..... VTSFT6543 WP49EG......................Y40
5402292 ..... VTSFT6543 WU40EG .....................Y40
5402293 ..... VTSFT6544 WP49EG......................Y40
5402294 ..... VTSFT6544 WU40EG .....................Y40
5408066 ..... GT405057 GP6520 ........................Y52
5408067 ..... GT405058 GP6520 ........................Y52
5408068 ..... GT405059 GP6520 ........................Y52
5408069 ..... GT415021 GP6520 ........................Y53
5408400 ..... GT415022 GP6520 ........................Y53
5408401 ..... GT415023 GP6520 ........................Y53
5408402 ..... GT425010 GP6520 ........................Y54
5408403 ..... GT425011 GP6520 ........................Y54
5408404 ..... GT425012 GP6520 ........................Y54
5408405 ..... GT435010 GP6520 ........................Y55
5408406 ..... GT435011 GP6520 ........................Y55
5408407 ..... GT435012 GP6520 ........................Y55
5415250 ..... XDPT110416PDSRMM WK15CM ...J10
5415253 ..... XDPT110416PDSRMM WP35CM ...J10
5415254 ..... XDPT110416PDSRMM WP25PM ...J10
5415255 ..... XDPT110408PDSRMH WK15CM ....J10
5415256 ..... XDPT110408PDSRMH WU35PM ....J10
5415257 ..... XDPT110408PDSRMH WP35CM ....J10
5415310 ..... XDPT110412PDSRMM WK15CM ...J10
5415312 ..... XDPT110412PDSRMM WU35PM ...J10
5415313 ..... XDPT110412PDSRMM WP35CM ...J10
5415314 ..... XDPT110412PDSRMM WP25PM ...J10
5415315 ..... XDPT110408PDSRMM WK15CM ...J10
5415317 ..... XDPT110408PDSRMM WU35PM ...J10
5415318 ..... XDPT110408PDSRMM WP35CM ...J10
5415319 ..... XDPT110408PDSRMM WP25PM ...J10
5415360 ..... XDPT110412PDSRMH WK15CM ....J10
5415362 ..... XDPT110412PDSRMH WP35CM ....J10
5415364 ..... XDPT110416PDSRMH WK15CM ....J10
5415366 ..... XDPT110416PDSRMH WP35CM ....J10
5415420 ..... XDCW110404PDFRPCD WDN10U
...........................................................................J11
5415421 ..... XDCW110408PDFRPCD WDN10U
...........................................................................J11
5415422 ..... XDPT110431PDSRMM WK15CM ...J10
5415425 ..... XDPT110431PDSRMM WP35CM ...J10
5415426 ..... XDPT110431PDSRMM WP25PM ...J10
5415428 ..... XDPT110404PDSRMM WK15CM ...J10
5415450 ..... XDPT110404PDSRMM WP35CM ...J10
5415546 ..... XDCT110408PDERML WU35PM.......J9
5415547 ..... XDCT110408PDERML WP35CM ......J9
5415548 ..... XDCT110408PDERML WP25PM .......J9
5415549 ..... XDCT110408PDERML WK15CM ......J9
5416316 ..... VSM11D040Z04S016XD11 ..... J8, J15
5416317 ..... VSM11D040Z06S016XD11 ..... J8, J15
5416318 ..... VSM11D050Z05S022XD11 ..... J8, J15
5416319 ..... VSM11D050Z08S022XD11 ..... J8, J15
5416340 ..... VSM11D063Z06S022XD11 ..... J8, J15
5416341 ..... VSM11D063Z09S022XD11 ..... J8, J15
5416342 ..... VSM11D080Z08S027XD11 ..... J8, J15
5416345 ..... VSM11D100Z09S032XD11 ..... J8, J15
5416347 ..... VSM11D125Z011S040XD11 ... J8, J15
Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 65 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRAND O b 28 2015 3 09 PM
Z66 widia.com
Index by Order Number
Order No. Catalogue No. Page(s)
5416454 ..... VSM11D012Z01B16XD11 ....... J5, J15
5416455 ..... VSM11D016Z02B16XD11 ....... J5, J15
5416457 ..... VSM11D020Z02B20XD11 ....... J5, J15
5416458 ..... VSM11D020Z03B20XD11 ....... J5, J15
5416459 ..... VSM11D025Z03B25XD11 ....... J5, J15
5416480 ..... VSM11D025Z04B25XD11 ....... J5, J15
5416481 ..... VSM11D030Z04B25XD11 ....... J5, J15
5416482 ..... VSM11D032Z04B32XD11 ....... J5, J15
5416483 ..... VSM11D032Z05B32XD11 ....... J5, J15
5416632 ..... VSM11D012Z01A16XD11L100 ......J6,
J15
5416633 ..... VSM11D016Z02A16XD11L100 ......J6,
J15
5416634 ..... VSM11D020Z02A20XD11L110 ......J6,
J15
5416635 ..... VSM11D020Z03A20XD11L110 ......J6,
J15
5416636 ..... VSM11D025Z03A25XD11L120 ......J6,
J15
5416637 ..... VSM11D025Z04A25XD11L120 ......J6,
J15
5416638 ..... VSM11D032Z03A32XD11L130 ......J6,
J15
5416639 ..... VSM11D032Z05A32XD11L130 ......J6,
J15
5416700 ..... VSM11D016Z02A16XD11L170 ......J7,
J15
5416701 ..... VSM11D018Z02A16XD11L170 ......J7,
J15
5416702 ..... VSM11D020Z02A20XD11L170 ......J7,
J15
5416703 ..... VSM11D020Z03A20XD11L170 ......J7,
J15
5416704 ..... VSM11D022Z03A20XD11L170 ......J7,
J15
5416705 ..... VSM11D025Z03A25XD11L210 ......J7,
J15
5416706 ..... VSM11D025Z04A25XD11L21 ........J7,
J15
5416707 ..... VSM11D032Z03A32XD11L250 ......J7,
J15
5417011 ..... VSM11D016Z02M08XD11....... J4, J15
5417013 ..... VSM11D020Z03M10XD11....... J4, J15
5417015 ..... VSM11D025Z04M12XD11....... J4, J15
5417017 ..... VSM11D032Z04M16XD11....... J4, J15
5417019 ..... VSM11D040Z06M16XD11....... J4, J15
5417053 ..... XDCT110408PDFRALP WN25PM ...J11
5417054 ..... XDCT110404PDFRALP WN25PM ...J11
5419648 ..... WOEJ120712SRMM WP25PM ......M13
5419649 ..... WOEJ120712SRMM WU35PM ......M13
5419790 ..... WOEJ120712SRMM WP20CM ......M13
5419791 ..... WOEJ120712SRMM WP35CM ......M13
5423874 ..... A25RWMTER0316M W ..................E35
5423875 ..... A32SWMTER0319M W ..................E35
5423876 ..... A25RWMTER0416M W ..................E35
5423877 ..... A32SWMTER0419M W ..................E35
5423878 ..... A32SWMTER0519M W ..................E35
5423879 ..... A40TWMTER0522M W ..................E35
5423880 ..... A32SWMTER0619M W ..................E35
5423881 ..... A40TWMTER0622M W ..................E35
5423882 ..... A25RWMTEL0316M W ..................E35
5423883 ..... A32SWMTEL0319M W ...................E35
5423884 ..... A25RWMTEL0416M W ..................E35
5423885 ..... A32SWMTEL0419M W ...................E35
5423886 ..... A32SWMTEL0519M W ...................E35
5423887 ..... A40TWMTEL0522M W ...................E35
5423888 ..... A32SWMTEL0619M W ...................E35
5423889 ..... A40TWMTEL0622M W ...................E35
5427370 ..... HNGJ0905ANSNGD WK15CM ...... H28,
H34, H40
5427371 ..... HNPJ0905ANSNHD WK15CM ...... H28,
H34, H40
5427372 ..... HNPJ0905ANSNGD WK15CM ...... H27,
H34, H40
5427373 ..... XNGJ0704ANENLD3W WK15CM ... H17
5427374 ..... HNPJ0704ANSNGD WK15CM ........ H9,
H17, H22
5427375 ..... HNPJ0704ANSNHD WK15CM ........ H9,
H17, H22
5427380 ..... SPMW120408 WK15CM ...................I9
5427381 ..... XNKT1205AZER11 WK15CM ......... H55
5427382 ..... SNMT1205AZR31 WK15CM.......... H55
5427383 ..... SNKT1205AZR21 WK15CM .......... H54
5427384 ..... SNKT1205AZR31 WK15CM .......... H55
5427385 ..... SNKT1505AZR31 WK15CM .......... H59
5427386 ..... SNMT1505AZR31 WK15CM.......... H59
5427387 ..... HPGT06T3DZENGD WK15CM ........ H47
5427388 ..... HPGT06T3DZERGD3W WK15CM ... H47
5427422 ..... SDMT1204PDRMH WK15CM ...J46, K7
5427423 ..... SDMT1204PDRML WK15CM ....J45, K6
5427424 ..... SDMT1506PDRMH WK15CM .........J50
5427425 ..... SDMT1506PDRML WK15CM ..........J49
5427426 ..... SDMX150612RMH WK15CM .........J50
5427427 ..... SDMX120408RMH WK15CM ...J46, K7
5427428 ..... SDMX120412RMH WK15CM ...J46, K7
5427441 ..... RDMW1204M0TX WK15CM ..........M87
5427443 ..... WOEJ080412SRMH WK15CM ........M7
5432605 ..... TNMG160404UF WS10PT ............. B88
5432606 ..... TNMG160408UF WS10PT ............. B88
5472587 ..... VTSFT6005 WU41EG .....................Y35
5472589 ..... VTSFT6007 WU41EG .....................Y35
5472600 ..... VTSFT6008 WU41EG .....................Y35
5472602 ..... VTSFT6010 WU41EG .....................Y35
5472603 ..... VTSFT6011 WU41EG .....................Y35
5472605 ..... VTSFT6013 WU41EG .....................Y35
5472606 ..... VTSFT6014 WU41EG .....................Y35
5472608 ..... VTSFT6016 WU41EG .....................Y35
5472609 ..... VTSFT6017 WU41EG .....................Y35
5472611 ..... VTSFT6019 WU41EG .....................Y35
5472612 ..... VTSFT6020 WU41EG .....................Y35
5472614 ..... VTSFT6022 WU41EG .....................Y35
5472615 ..... VTSFT6023 WU41EG .....................Y35
5472617 ..... VTSFT6025 WU41EG .....................Y35
5472618 ..... VTSFT6026 WU41EG .....................Y35
5472620 ..... VTSFT6028 WU41EG .....................Y35
5472621 ..... VTSFT6029 WU41EG .....................Y35
5472623 ..... VTSFT6031 WU41EG .....................Y35
5472624 ..... VTSFT6032 WU41EG .....................Y35
5472625 ..... VTSFT6033 WU41EG .....................Y35
5472626 ..... VTSFT6034 WU41EG .....................Y36
5472627 ..... VTSFT6035 WU41EG .....................Y36
5472628 ..... VTSFT6036 WU41EG .....................Y36
5472629 ..... VTSFT6037 WU41EG .....................Y36
5472630 ..... VTSFT6038 WU41EG .....................Y36
5472631 ..... VTSFT6039 WU41EG .....................Y36
5472632 ..... VTSFT6040 WU41EG .....................Y36
5472633 ..... VTSPO6005 WU41EG .....................Y11
5472634 ..... VTSPO6006 WU41EG .....................Y13
5472635 ..... VTSPO6007 WU41EG .....................Y11
5472636 ..... VTSPO6008 WU41EG .....................Y11
5472637 ..... VTSPO6009 WU41EG .....................Y13
5472638 ..... VTSPO6010 WU41EG .....................Y11
5472639 ..... VTSPO6011 WU41EG .....................Y11
5472640 ..... VTSPO6012 WU41EG .....................Y13
5472641 ..... VTSPO6013 WU41EG .....................Y11
5472644 ..... VTSPO6014 WU41EG .....................Y11
5472645 ..... VTSPO6015 WU41EG .....................Y13
5472646 ..... VTSPO6016 WU41EG .....................Y11
5472647 ..... VTSPO6017 WU41EG .....................Y11
5472648 ..... VTSPO6018 WU41EG .....................Y13
5472649 ..... VTSPO6019 WU41EG .....................Y11
5472650 ..... VTSPO6020 WU41EG .....................Y11
5472651 ..... VTSPO6021 WU41EG .....................Y13
5472652 ..... VTSPO6022 WU41EG .....................Y11
5472653 ..... VTSPO6023 WU41EG .....................Y11
5472654 ..... VTSPO6024 WU41EG .....................Y13
5472655 ..... VTSPO6025 WU41EG .....................Y11
5472656 ..... VTSPO6026 WU41EG .....................Y11
5472657 ..... VTSPO6027 WU41EG .....................Y13
5472658 ..... VTSPO6028 WU41EG .....................Y11
5472659 ..... VTSPO6029 WU41EG .....................Y11
5472660 ..... VTSPO6030 WU41EG .....................Y13
5472661 ..... VTSPO6031 WU41EG .....................Y11
5472662 ..... VTSPO6032 WU41EG .....................Y11
5472663 ..... VTSPO6033 WU41EG .....................Y11
5472664 ..... VTSPO6034 WU41EG .....................Y12
5472665 ..... VTSPO6035 WU41EG .....................Y12
5472666 ..... VTSPO6036 WU41EG .....................Y12
5472667 ..... VTSPO6037 WU41EG .....................Y12
5472668 ..... VTSPO6038 WU41EG .....................Y12
5472669 ..... VTSPO6039 WU41EG .....................Y12
5472670 ..... VTSPO6040 WU41EG .....................Y12
5473198 ..... TNMG220412UR WS25PT............. B89
5473222 ..... TNMG220412UM WS10PT ............ B88
5476633 ..... RNPJ10T3M0SMH WU35PM .........M25
5476634 ..... RNPJ1204M0SMM WU35PM ........M33
5476635 ..... RNPJ1204M0SMH WU35PM .........M33
5476636 ..... RNPJ1605M0SMH WU35PM .........M38
5476637 ..... RNPJ1605M0SMM WU35PM ........M38
5512536 ..... CNMG190612UR WS25PT ............ B43
5512538 ..... SNMG190612UR WS25PT ............ B75
5514978 ..... WGMEL2525 W..............................E37
5514979 ..... WGMER2525 W .............................E37
5515020 ..... WGMEL3232 W..............................E37
5515021 ..... WGMER3232 W .............................E37
5517826 ..... XDCT110408PDERML WS30PM .......J9
5517827 ..... XDPT110431PDSRMM WS30PM ...J10
5519572 ..... SDMX120412RMM WS30PM ...J45, K6
5519921 ..... XDPT110408PDSRMM WS30PM ...J10
5520247 ..... RDMT1204M0TX WS30PM ...........M87
5520248 ..... WOEJ080412SRMM WS30PM ........M7
5520249 ..... WOEJ120712SRMM WS30PM ......M13
5520350 ..... RNGJ1204M0EML WS30PM .........M32
5520351 ..... RNGJ1204M0SMM WS30PM ........M32
5520352 ..... RNGJ10T3M0EML WS30PM .........M24
5520353 ..... RNGJ10T3M0SMM WS30PM ........M24
5520354 ..... RNGJ1605M0EML WS30PM .........M37
5520817 ..... GX505004 WK12PG .......................Y51
5520818 ..... GX505005 WK12PG .......................Y51
5520819 ..... GX505006 WK12PG .......................Y51
5520820 ..... GX505008 WK12PG .......................Y51
5520822 ..... GX505010 WK12PG .......................Y51
5520823 ..... GX505012 WK12PG .......................Y51
5520824 ..... GX505014 WK12PG .......................Y51
5520825 ..... GX355006 WK12PG .......................Y48
5520826 ..... GX355007 WK12PG .......................Y48
5520827 ..... GX355008 WK12PG .......................Y48
5520828 ..... GX355009 WK12PG .......................Y48
5520829 ..... GX355010 WK12PG .......................Y48
5520830 ..... GX355101 WK12PG .......................Y48
5520831 ..... GX355102 WK12PG .......................Y48
5520833 ..... GX355012 WK12PG .......................Y48
5520834 ..... GX355121 WK12PG .......................Y48
5520835 ..... GX355122 WK12PG .......................Y48
5520836 ..... GX355014 WK12PG .......................Y48
5520837 ..... GX355141 WK12PG .......................Y48
5520838 ..... GX355142 WK12PG .......................Y48
5520839 ..... GX475006 WN14PG ......................Y49
5520840 ..... GX475008 WN14PG ......................Y49
5520841 ..... GX475010 WN14PG ......................Y49
5520842 ..... GX495006 WN14PG ......................Y60
5520843 ..... GX495008 WN14PG ......................Y60
5520844 ..... GX495010 WN14PG ......................Y60
5522490 ..... SDMX120408RMM WS30PM ...J45, K6
5528973 ..... HNGJ0905ANENLD WS30PM ....... H33,
H39
5528974 ..... HNGJ0905ANSNGD WS30PM ...... H28,
H34, H40
5528975 ..... HNGJ0704ANENLD WS30PM ......... H8,
H16, H21
5528976 ..... HNPJ0704ANSNGD WS30PM......... H9,
H17, H22
5528978 ..... HPGT06T3DZENGD WS30PM ........ H47
5536670 ..... XDCT110404PDERML WP35CM ......J9
5536671 ..... XDCT110404PDERML WP25PM .......J9
5537167 ..... TCF240R2SL25MD ..................V8, V10
5537168 ..... TCF250R2SL32MD ..........................V8
5537169 ..... TCF260R2SL32MD ..........................V8
5537778 ..... TCF120R2SL20MA ..........................V8
5537779 ..... TCF125R2SL20MA ..........................V8
5537820 ..... TCF265R2SL32MD ..........................V8
5537821 ..... TCF270R2SL32MD ..........................V8
5537822 ..... TCF280R2SL32MD ..........................V8
5537823 ..... TCF290R2SL32MD ..................V8, V10
5537824 ..... TCF240R3SL25MD ................V11, V13
5537825 ..... TCF250R3SL32MD ........................V11
5537826 ..... TCF260R3SL32MD ........................V11
5537827 ..... TCF265R3SL32MD ........................V11
5537828 ..... TCF270R3SL32MD ........................V11
5537829 ..... TCF280R3SL32MD ........................V11
5537830 ..... TCF290R3SL32MD ................V11, V13
5537831 ..... TCF240R4SL25MD ................V14, V16
5537832 ..... TCF250R4SL32MD ........................V14
5537833 ..... TCF260R4SL32MD ........................V14
5537834 ..... TCF265R4SL32MD ........................V14
5537835 ..... TCF270R4SL32MD ........................V14
5537836 ..... TCF280R4SL32MD ........................V14
5537837 ..... TCF290R4SL32MD ................V14, V16
5537838 ..... TCF240R5SL25MD ................V17, V19
5537839 ..... TCF250R5SL32MD ........................V17
5537840 ..... TCF260R5SL32MD ........................V17
5537841 ..... TCF265R5SL32MD ........................V17
5537842 ..... TCF270R5SL32MD ........................V17
5537843 ..... TCF280R5SL32MD ........................V17
5537844 ..... TCF290R5SL32MD ................V17, V19
5537860 ..... TCF127R2SL20MA ..........................V8
5537861 ..... TCF130R2SL20MA ..........................V8
5537862 ..... TCF135R2SL20MA ..................V8, V10
5537863 ..... TCF120R3SL20MA ........................V11
5537864 ..... TCF125R3SL20MA ........................V11
5537866 ..... TCF127R3SL20MA ........................V11
5537867 ..... TCF130R3SL20MA ........................V11
5537868 ..... TCF135R3SL20MA ................V11, V13
5537869 ..... TCF120R4SL20MA ........................V14
Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 66 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRANDO b 28 20153 09PM
Z67
widia.com
Index by Order Number
Order No. Catalogue No. Page(s)
5537870 ..... TCF125R4SL20MA ........................V14
5537871 ..... TCF127R4SL20MA ........................V14
5537872 ..... TCF130R4SL20MA ........................V14
5537873 ..... TCF135R4SL20MA ................V14, V16
5537874 ..... TCF120R5SL20MA ........................V17
5537875 ..... TCF125R5SL20MA ........................V17
5537876 ..... TCF127R5SL20MA ........................V17
5537877 ..... TCF130R5SL20MA ........................V17
5537878 ..... TCF135R5SL20MA ................V17, V19
5537937 ..... TCF300R2SL32ME ...........................V8
5537938 ..... TCF310R2SL32ME ...........................V8
5537939 ..... TCF320R2SL32ME .................... V9–10
5537940 ..... TCF330R2SL40ME ...........................V9
5537941 ..... TCF340R2SL40ME ...........................V9
5537942 ..... TCF350R2SL40ME ...........................V9
5537943 ..... TCF360R2SL40ME .................... V9–10
5537944 ..... TCF300R3SL32ME .........................V11
5537945 ..... TCF310R3SL32ME .........................V11
5537946 ..... TCF320R3SL32ME .................. V12–13
5537947 ..... TCF330R3SL40ME .........................V12
5537948 ..... TCF340R3SL40ME .........................V12
5537949 ..... TCF350R3SL40ME .........................V12
5537950 ..... TCF360R3SL40ME .................. V12–13
5537951 ..... TCF300R4SL32ME .........................V14
5537952 ..... TCF310R4SL32ME .........................V14
5537953 ..... TCF320R4SL32ME .................. V15–16
5537954 ..... TCF330R4SL40ME .........................V15
5537955 ..... TCF340R4SL40ME .........................V15
5537956 ..... TCF350R4SL40ME .........................V15
5537957 ..... TCF360R4SL40ME .................. V15–16
5537958 ..... TCF300R5SL32ME .........................V17
5537959 ..... TCF310R5SL32ME .........................V17
5537960 ..... TCF320R5SL32ME .................. V18–19
5537961 ..... TCF330R5SL40ME .........................V18
5537962 ..... TCF340R5SL40ME .........................V18
5537963 ..... TCF350R5SL40ME .........................V18
5537964 ..... TCF360R5SL40ME .................. V18–19
5538204 ..... CNGG120404FS WS25PT ............. B35
5538205 ..... CNGG120408FS WS25PT ............. B35
5538206 ..... DNGG110402FS WS25PT ............. B51
5538207 ..... DNGG150404FS WS25PT ............. B51
5538208 ..... DNGG150408FS WS25PT ............. B51
5538209 ..... DNGG150604FS WS25PT ............. B51
5538230 ..... DNGG150608FS WS25PT ............. B51
5538231 ..... TNGG160404FS WS25PT .............. B83
5538232 ..... VNGG160404FS WS25PT.............. B95
5538233 ..... VNGG160408FS WS25PT.............. B95
5538234 ..... WNGG080404FS WS25PT ............ B99
5538235 ..... WNGG080408FS WS25PT ............ B99
5538554 ..... TCF090305DCV34 WU25CH ..........V20
5538555 ..... TCF090305DCV34 WU40PH ..........V20
5538556 ..... TCF090305DCV36 WU25CH ..........V21
5538557 ..... TCF090305DCV36 WU40PH ..........V21
5538558 ..... TCF080308DPV34 WU25CH ..........V22
5538559 ..... TCF080308DPV34 WU40PH ..........V22
5538600 ..... TCF080308DPV34 WPK10CH ........V22
5538601 ..... TCF080308DPV36 WU25CH ..........V23
5538602 ..... TCF080308DPV36 WU40PH ..........V23
5538603 ..... TCF120405ECV34 WU25CH...........V20
5538604 ..... TCF120405ECV34 WU40PH ...........V20
5538606 ..... TCF120405ECV36 WU25CH...........V21
5538607 ..... TCF120405ECV36 WU40PH ...........V21
5538608 ..... TCF100408EPV34 WU25CH ...........V22
5538609 ..... TCF100408EPV34 WU40PH ...........V22
5538610 ..... TCF100408EPV34 WPK10CH .........V22
5538611 ..... TCF100408EPV36 WU25CH ...........V23
5538612 ..... TCF100408EPV36 WU40PH ...........V23
5538613 ..... TCF570R2SL50MH ..........................V9
5538614 ..... TCF580R2SL50MH ..........................V9
5538615 ..... TCF590R2SL50MH ..........................V9
5538616 ..... TCF600R2SL50MH ..........................V9
5538617 ..... TCF610R2SL50MH ..........................V9
5538618 ..... TCF620R2SL50MH ..........................V9
5538619 ..... TCF630R2SL50MH ..........................V9
5538630 ..... TCF640R2SL50MH ..........................V9
5538631 ..... TCF650R2SL50MH ..........................V9
5538632 ..... TCF660R2SL50MH ..........................V9
5538633 ..... TCF670R2SL50MH ..........................V9
5538634 ..... TCF680R2SL50MH ................... V9–10
5538635 ..... TCF570R3SL50MH ........................V12
5538636 ..... TCF580R3SL50MH ........................V12
5538637 ..... TCF590R3SL50MH ........................V12
5538638 ..... TCF600R3SL50MH ........................V12
5538639 ..... TCF610R3SL50MH ........................V12
5538640 ..... TCF620R3SL50MH ........................V12
5538641 ..... TCF630R3SL50MH ........................V12
5538642 ..... TCF640R3SL50MH ........................V12
5538643 ..... TCF650R3SL50MH ........................V12
5538644 ..... TCF660R3SL50MH ........................V12
5538645 ..... TCF670R3SL50MH ........................V12
5538646 ..... TCF680R3SL50MH ................. V12–13
5538647 ..... TCF570R4SL50MH ........................V15
5538648 ..... TCF580R4SL50MH ........................V15
5538649 ..... TCF590R4SL50MH ........................V15
5538650 ..... TCF600R4SL50MH ........................V15
5538651 ..... TCF610R4SL50MH ........................V15
5538652 ..... TCF620R4SL50MH ........................V15
5538653 ..... TCF630R4SL50MH ........................V15
5538654 ..... TCF640R4SL50MH ........................V15
5538655 ..... TCF650R4SL50MH ........................V15
5538656 ..... TCF660R4SL50MH ........................V15
5538657 ..... TCF670R4SL50MH ........................V15
5538658 ..... TCF680R4SL50MH ................. V15–16
5538659 ..... TCF570R5SL50MH ........................V18
5538680 ..... TCF580R5SL50MH ........................V18
5538681 ..... TCF590R5SL50MH ........................V18
5538682 ..... TCF600R5SL50MH ........................V18
5538683 ..... TCF610R5SL50MH ........................V18
5538684 ..... TCF620R5SL50MH ........................V18
5538685 ..... TCF630R5SL50MH ........................V18
5538686 ..... TCF640R5SL50MH ........................V18
5538687 ..... TCF650R5SL50MH ........................V18
5538688 ..... TCF660R5SL50MH ........................V18
5538689 ..... TCF670R5SL50MH ........................V18
5538700 ..... TCF680R5SL50MH ................. V18–19
5541817 ..... TCF040203ACV34 WU25CH ..........V20
5541818 ..... TCF040203ACV34 WU40PH ..........V20
5541819 ..... TCF040203ACV36 WU25CH ..........V21
5541840 ..... TCF040203ACV36 WU40PH ..........V21
5541841 ..... TCF040204APV34 WU25CH ..........V22
5541842 ..... TCF040204APV34 WU40PH ...........V22
5541843 ..... TCF040204APV34 WPK10CH ........V22
5541844 ..... TCF040204APV36 WU25CH ..........V23
5541845 ..... TCF040204APV36 WU40PH ...........V23
5542002 ..... TCF210608HCV34 WU25CH ..........V20
5542003 ..... TCF210608HCV34 WU40PH ..........V20
5542004 ..... TCF210608HCV36 WU25CH ..........V21
5542005 ..... TCF210608HCV36 WU40PH ..........V21
5542006 ..... TCF180614HPV34 WU25CH ..........V22
5542007 ..... TCF180614HPV34 WU40PH...........V22
5542008 ..... TCF180614HPV34 WPK10CH ........V22
5542009 ..... TCF180614HPV36 WU25CH ..........V23
5542020 ..... TCF180614HPV36 WU40PH...........V23
5542327 ..... RNPJ10T3M0SMM WP40PM ........M25
5542328 ..... RNPJ10T3M0SMH WP40PM .........M25
5542329 ..... RNPJ1204M0SMM WP40PM ........M33
5542340 ..... RNPJ1204M0SMH WP40PM .........M33
5542341 ..... RNPJ1605M0SMM WP40PM ........M38
5542342 ..... RNPJ1605M0SMH WP40PM .........M38
5542346 ..... WOEJ120712SRMM WP40PM ......M13
5542347 ..... WOEJ120712SRMH WP40PM .......M13
5542475 ..... TCF180508GCV34 WU25CH ..........V20
5542476 ..... TCF180508GCV34 WU40PH ..........V20
5542477 ..... TCF180508GCV36 WU25CH ..........V21
5542478 ..... TCF180508GCV36 WU40PH ..........V21
5542479 ..... TCF150512GPV34 WU25CH ..........V22
5542600 ..... TCF150512GPV34 WU40PH ..........V22
5542601 ..... TCF150512GPV34 WPK10CH ........V22
5542602 ..... TCF060203BCV34 WU25CH ..........V20
5542603 ..... TCF150512GPV36 WU25CH ..........V23
5542604 ..... TCF060203BCV34 WU40PH ..........V20
5542605 ..... TCF150512GPV36 WU40PH ..........V23
5542606 ..... TCF060203BCV36 WU25CH ..........V21
5542607 ..... TCF060203BCV36 WU40PH ..........V21
5542608 ..... TCF050204BPV34 WU25CH ..........V22
5542609 ..... TCF050204BPV34 WU40PH ...........V22
5542620 ..... TCF050204BPV34 WPK10CH ........V22
5542621 ..... TCF050204BPV36 WU25CH ..........V23
5542622 ..... TCF050204BPV36 WU40PH ...........V23
5542623 ..... TCF150406FCV34 WU25CH ...........V20
5542624 ..... TCF150406FCV34 WU40PH ...........V20
5542625 ..... TCF150406FCV36 WU25CH ...........V21
5542626 ..... TCF150406FCV36 WU40PH ...........V21
5542627 ..... TCF120412FPV34 WU25CH ...........V22
5542628 ..... TCF120412FPV34 WU40PH ...........V22
5542629 ..... TCF120412FPV34 WPK10CH .........V22
5542640 ..... TCF120412FPV36 WU25CH ...........V23
5542641 ..... TCF120412FPV36 WU40PH ...........V23
5542642 ..... TCF070304CCV34 WU25CH ..........V20
5542643 ..... TCF070304CCV34 WU40PH ..........V20
5542644 ..... TCF070304CCV36 WU25CH ..........V21
5542645 ..... TCF070304CCV36 WU40PH ..........V21
5542646 ..... TCF070306CPV34 WU25CH ..........V22
5542647 ..... TCF070306CPV34 WU40PH...........V22
5542648 ..... TCF070306CPV34 WPK10CH ........V22
5542649 ..... TCF070306CPV36 WU25CH ..........V23
5542650 ..... TCF070306CPV36 WU40PH...........V23
5544752 ..... WOEJ080412SRMH WP40PM .........M7
5544753 ..... WOEJ080412SRMM WP40PM ........M7
5545063 ..... XDPT110408PDSRMM WP40PM ...J10
5545064 ..... XDPT110408PDSRMH WP40PM ....J10
5545065 ..... XDCT110408PDERML WP40PM .......J9
5548575 ..... CNGG120402FS WS10PT ............. B35
5548576 ..... CNGG120401FS WS10PT ............. B35
5548577 ..... CNGG120404FS WS10PT ............. B35
5548578 ..... CNGG120408FS WS10PT ............. B35
5548579 ..... CNGG120412FS WS10PT ............. B35
5548670 ..... DNGG110402FS WS10PT ............. B51
5548671 ..... DNGG110404FS WS10PT ............. B51
5548672 ..... DNGG110408FS WS10PT ............. B51
5548673 ..... DNGG150402FS WS10PT ............. B51
5548674 ..... DNGG150401FS WS10PT ............. B51
5548675 ..... DNGG150404FS WS10PT ............. B51
5548676 ..... DNGG150408FS WS10PT ............. B51
5548677 ..... DNGG150412FS WS10PT ............. B51
5548678 ..... DNGG150604FS WS10PT ............. B51
5548679 ..... DNGG150608FS WS10PT ............. B51
5548680 ..... SNGG120408FS WS10PT ............. B70
5548681 ..... TNGG160404FS WS10PT .............. B83
5548682 ..... TNGG220408FS WS10PT .............. B83
5548683 ..... VNGG160402FS WS10PT.............. B95
5548684 ..... VNGG160401FS WS10PT.............. B95
5548685 ..... VNGG160404FS WS10PT.............. B95
5548686 ..... VNGG160408FS WS10PT.............. B95
5548687 ..... WNGG080404FS WS10PT ............ B99
5548688 ..... WNGG080408FS WS10PT ............ B99
5549137 ..... CNGP120401 WS10PT ................. B35
5549138 ..... CNGP120402 WS10PT ................. B35
5549139 ..... CNGP120404 WS10PT ................. B35
5549190 ..... CNGP120408 WS10PT ................. B35
5549191 ..... DNGP150401 WS10PT ................. B52
5549192 ..... DNGP150402 WS10PT ................. B52
5549193 ..... DNGP150404 WS10PT ................. B52
5549194 ..... DNGP150408 WS10PT ................. B52
5549195 ..... VNGP160401 WS10PT .................. B96
5549196 ..... VNGP160402 WS10PT .................. B96
5549197 ..... VNGP220404 WS10PT .................. B96
5549198 ..... VNGP220408 WS10PT .................. B96
5549206 ..... CNGP120402 WU10HT ................. B35
5549207 ..... CNGP120404 WU10HT ................. B35
5549208 ..... CNGP120408 WU10HT ................. B35
5549209 ..... DNGP150404 WU10HT ................. B52
5549210 ..... DNGP150408 WU10HT ................. B52
5549211 ..... VNGP160401 WU10HT ................. B96
5549212 ..... VNGP220408 WU10HT ................. B96
5549945 ..... CNGG120404FS WU10HT ............. B35
5549946 ..... CNGG120408FS WU10HT ............. B35
5549947 ..... DNGG110402FS WU10HT ............. B51
5549948 ..... DNGG110404FS WU10HT ............. B51
5549949 ..... DNGG110408FS WU10HT ............. B51
5549990 ..... DNGG150402FS WU10HT ............. B51
5549991 ..... DNGG150401FS WU10HT ............. B51
5549992 ..... DNGG150404FS WU10HT ............. B51
5549993 ..... DNGG150408FS WU10HT ............. B51
5549994 ..... DNGG150412FS WU10HT ............. B51
5549995 ..... DNGG150604FS WU10HT ............. B51
5549996 ..... DNGG150608FS WU10HT ............. B51
5549997 ..... SNGG120408FS WU10HT ............. B70
5549998 ..... TNGG160404FS WU10HT ............. B83
5549999 ..... VNGG160402FS WU10HT ............. B95
5550000 ..... VNGG160401FS WU10HT ............. B95
5550001 ..... VNGG160404FS WU10HT ............. B95
5550002 ..... VNGG160408FS WU10HT ............. B95
5550003 ..... WNGG080404FS WU10HT ............ B99
5550004 ..... WNGG080408FS WU10HT ............ B99
5550226 ..... TNMG160404UM WS10PT ............ B88
5550228 ..... TNMG160408UM WS10PT ............ B88
5550905 ..... HNGJ0704ANENLD WP40PM ......... H8,
H16, H21
5550906 ..... HNPJ0704ANSNGD WP40PM......... H9,
H17, H22
5550907 ..... HNPJ0704ANSNHD WP40PM ......... H9,
H17, H22
5550908 ..... HNPJ0905ANSNGD WP40PM....... H27,
H34, H40
5550909 ..... HNPJ0905ANSNHD WP40PM ....... H28,
H34, H40
5551088 ..... SNMT1205AZR31 WP40PM .......... H55
5551152 ..... GX352733 WK12PG .......................Y47
5551153 ..... GX352734 WK12PG .......................Y47
5551154 ..... GX352735 WK12PG .......................Y47
5551155 ..... GX352737 WK12PG .......................Y47
5551156 ..... GX352738 WK12PG .......................Y47
5551157 ..... GX352739 WK12PG .......................Y47
Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 67 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRAND O b 28 2015 3 09 PM
Z68 widia.com
Index by Order Number
Order No. Catalogue No. Page(s)
5551159 ..... GX352740 WK12PG .......................Y47
5551160 ..... GX352741 WK12PG .......................Y47
5551161 ..... GX472866 WN14PG ......................Y50
5551162 ..... GX472867 WN14PG ......................Y50
5551163 ..... GX472868 WN14PG ......................Y50
5551164 ..... GX472872 WN14PG ......................Y50
5551165 ..... GX472870 WN14PG ......................Y50
5551166 ..... GX472874 WN14PG ......................Y50
5551167 ..... GX472873 WN14PG ......................Y50
5551168 ..... GX472875 WN14PG ......................Y50
5551169 ..... GX492908 WN14PG ......................Y61
5551170 ..... GX492909 WN14PG ......................Y61
5551171 ..... GX492911 WN14PG ......................Y61
5551172 ..... GX492914 WN14PG ......................Y61
5551173 ..... GX492915 WN14PG ......................Y61
5559100 ..... D50706002W WP15PE ................. O92
5559101 ..... D50708003W WP15PE ................. O92
5559102 ..... D50710004W WP15PE ................. O92
5559103 ..... D50712005W WP15PE ................. O92
5559104 ..... D50714014W WP15PE ................. O92
5559105 ..... D50716006W WP15PE ................. O92
5559106 ..... D50718018W WP15PE ................. O92
5559107 ..... D50720007W WP15PE ................. O92
5559108 ..... D51706002W WP15PE ................. O92
5559109 ..... D51708003W WP15PE ................. O92
5559110 ..... D51710004W WP15PE ................. O92
5559111 ..... D51712005W WP15PE ................. O92
5559112 ..... D51714014W WP15PE ................. O92
5559113 ..... D51716006W WP15PE ................. O92
5559114 ..... D51718018W WP15PE ................. O92
5559115 ..... D51720007W WP15PE ................. O92
5559116 ..... D51804002W WP15PE ................. O95
5559117 ..... D51805002W WP15PE ................. O95
5559118 ..... D51806002W WP15PE ................. O95
5559119 ..... D51807003W WP15PE ................. O95
5559120 ..... D51808003W WP15PE ................. O95
5559121 ..... D51809004W WP15PE ................. O95
5559122 ..... D51810004W WP15PE ................. O95
5559123 ..... D51812005W WP15PE ................. O95
5559124 ..... D51814014W WP15PE ................. O95
5559125 ..... D51816006W WP15PE ................. O95
5559126 ..... D51818018W WP15PE ................. O95
5559127 ..... D51820007W WP15PE ................. O95
5559128 ..... D51825008W WP15PE ................. O95
5559146 ..... 400101001T WP15PE .................. O84
5559147 ..... 400101501T WP15PE .................. O84
5559148 ..... 400102001T WP15PE .................. O84
5559149 ..... 400103002T WP15PE .................. O84
5559160 ..... 400104002T WP15PE .................. O84
5559161 ..... 400105002T WP15PE .................. O84
5559162 ..... 400106002T WP15PE .................. O84
5559163 ..... 400108003T WP15PE .................. O84
5559164 ..... 400110004T WP15PE .................. O84
5559165 ..... 400112005T WP15PE .................. O84
5559166 ..... 400114005T WP15PE .................. O84
5559167 ..... 400116006T WP15PE .................. O84
5559168 ..... 400118006T WP15PE .................. O84
5559169 ..... 400120007T WP15PE .................. O84
5559170 ..... 450301001T WP15PE .................. O87
5559171 ..... 450301501T WP15PE .................. O87
5559172 ..... 450302001T WP15PE .................. O87
5559173 ..... 450302501T WP15PE .................. O87
5559174 ..... 450302511T WP15PE .................. O87
5559175 ..... 450303002T WP15PE .................. O87
5559176 ..... 450303502T WP15PE .................. O87
5559177 ..... 450304002T WP15PE .................. O87
5559178 ..... 450304502T WP15PE .................. O87
5559179 ..... 450305002T WP15PE .................. O87
5559180 ..... 450306002T WP15PE .................. O87
5559181 ..... 450308003T WP15PE .................. O87
5559182 ..... 450310004T WP15PE .................. O87
5559183 ..... 450312005T WP15PE .................. O87
5559184 ..... 450316006T WP15PE .................. O87
5559185 ..... 450320007T WP15PE .................. O87
5560534 ..... DQ1303002T WP15PE .................. O54
5560535 ..... DQ1304002T WP15PE .................. O54
5560536 ..... DQ1303002W WP15PE ................ O54
5560537 ..... DQ1304002W WP15PE ................ O54
5560538 ..... DQ1305002W WP15PE ................ O54
5560539 ..... DQ1306002W WP15PE ................ O54
5560700 ..... DQ1307003W WP15PE ................ O54
5560701 ..... DQ1308003W WP15PE ................ O54
5560702 ..... DQ1310004W WP15PE ................ O54
5560703 ..... DQ1312005W WP15PE ................ O54
5560704 ..... DQ1314014W WP15PE ................ O54
5560705 ..... DQ1316006W WP15PE ................ O54
5560706 ..... DQ1318018W WP15PE ................ O54
5560707 ..... DQ1320007W WP15PE ................ O54
5560708 ..... 497604002T WP15PE .................. O57
5560709 ..... 497605002T WP15PE .................. O57
5560710 ..... 497606002T WP15PE .................. O57
5560711 ..... 497608003T WP15PE .................. O57
5560712 ..... 497610004T WP15PE .................. O57
5560713 ..... 497612005T WP15PE .................. O57
5560714 ..... 497614014T WP15PE .................. O57
5560715 ..... 497616006T WP15PE .................. O57
5560716 ..... 497618018T WP15PE .................. O57
5560717 ..... 497620007T WP15PE .................. O57
5560718 ..... 497625008T WP15PE .................. O57
5564335 ..... DDJNL3232P15KC06 WG ............. C11
5564336 ..... DDJNR3232P15KC06 WG ............. C11
5564596 ..... WOEJ080412SRMH WP25PM .........M7
5564597 ..... WOEJ080412SRMM WP25PM ........M7
5576751 ..... 477704002T WP15PE .................... O4
5576752 ..... 477704002W WP15PE ................... O4
5576753 ..... 477704001T WP15PE .................... O4
5576754 ..... 4777040Z2T WP15PE .................... O4
5576755 ..... 477705002T WP15PE .................... O4
5576756 ..... 477705002W WP15PE ................... O4
5576757 ..... 477705012T WP15PE .................... O4
5576758 ..... 4777050Z2T WP15PE .................... O4
5576759 ..... 477706002T WP15PE .................... O4
5576760 ..... 477706002W WP15PE ................... O4
5576761 ..... 477706012T WP15PE .................... O4
5576762 ..... 4777060Z2T WP15PE .................... O4
5576763 ..... 477707003T WP15PE .................... O4
5576764 ..... 477707003W WP15PE ................... O4
5576765 ..... 477707013T WP15PE .................... O4
5576766 ..... 4777070Z3T WP15PE .................... O4
5576767 ..... 477708003T WP15PE .................... O4
5576768 ..... 477708003W WP15PE ................... O4
5576769 ..... 477708013T WP15PE .................... O4
5576770 ..... 4777080Z3T WP15PE .................... O4
5576771 ..... 477709004T WP15PE .................... O4
5576772 ..... 477709004W WP15PE ................... O4
5576773 ..... 477709014T WP15PE .................... O4
5576774 ..... 4777090Z4T WP15PE .................... O4
5576775 ..... 477710004T WP15PE .................... O4
5576776 ..... 477710004W WP15PE ................... O4
5576777 ..... 477710024T WP15PE .................... O4
5576778 ..... 4777100Z4T WP15PE .................... O5
5576779 ..... 4777110Z5T WP15PE .................... O5
5576790 ..... 477712005T WP15PE .................... O5
5576791 ..... 477712005W WP15PE ................... O5
5576792 ..... 477712025T WP15PE .................... O5
5576793 ..... 4777120Z5T WP15PE .................... O5
5576794 ..... 477714015T WP15PE .................... O5
5576795 ..... 477714014W WP15PE ................... O5
5576796 ..... 477716006T WP15PE .................... O5
5576797 ..... 477716006W WP15PE ................... O5
5576798 ..... 477716026T WP15PE .................... O5
5576799 ..... 4777160Z6T WP15PE .................... O5
5576810 ..... 477718018T WP15PE .................... O5
5576811 ..... 477718018W WP15PE ................... O5
5576812 ..... 477720007T WP15PE .................... O5
5576813 ..... 477720007W WP15PE ................... O5
5576814 ..... 47772002T WP15PE ...................... O5
5576816 ..... 477725008T WP15PE .................... O5
5576817 ..... 477725008W WP15PE ................... O5
5576818 ..... 47N005002T WP15PE .................. O12
5576819 ..... 47N006002T WP15PE .................. O12
5576820 ..... 47N008003T WP15PE .................. O12
5576821 ..... 47N010004T WP15PE .................. O12
5576822 ..... 47N012005T WP15PE .................. O12
5576823 ..... 47N016006T WP15PE .................. O12
5576824 ..... 47N020007T WP15PE .................. O12
5577828 ..... TCF140R2SL25MB ..........................V8
5577829 ..... TCF145R2SL25MB ..........................V8
5577920 ..... TCF150R2SL25MB ..........................V8
5577921 ..... TCF155R2SL25MB ..........................V8
5577922 ..... TCF160R2SL25MB ..........................V8
5577923 ..... TCF165R2SL25MB ..........................V8
5577924 ..... TCF170R2SL25MB ..........................V8
5577925 ..... TCF175R2SL25MB ..........................V8
5577926 ..... TCF180R2SL25MB ..........................V8
5577927 ..... TCF185R2SL25MB ..................V8, V10
5577928 ..... TCF140R3SL25MB ........................V11
5577929 ..... TCF145R3SL25MB ........................V11
5577930 ..... TCF150R3SL25MB ........................V11
5577931 ..... TCF155R3SL25MB ........................V11
5577932 ..... TCF160R3SL25MB ........................V11
5577933 ..... TCF165R3SL25MB ........................V11
5577934 ..... TCF170R3SL25MB ........................V11
5577935 ..... TCF175R3SL25MB ........................V11
5577936 ..... TCF180R3SL25MB ........................V11
5577937 ..... TCF185R3SL25MB ................V11, V13
5577938 ..... TCF140R4SL25MB ........................V14
5577939 ..... TCF145R4SL25MB ........................V14
5577940 ..... TCF150R4SL25MB ........................V14
5577941 ..... TCF155R4SL25MB ........................V14
5577942 ..... TCF160R4SL25MB ........................V14
5577943 ..... TCF165R4SL25MB ........................V14
5577944 ..... TCF170R4SL25MB ........................V14
5577945 ..... TCF175R4SL25MB ........................V14
5577946 ..... TCF180R4SL25MB ........................V14
5577947 ..... TCF185R4SL25MB ................V14, V16
5577948 ..... TCF140R5SL25MB ........................V17
5577949 ..... TCF145R5SL25MB ........................V17
5577950 ..... TCF150R5SL25MB ........................V17
5577951 ..... TCF155R5SL25MB ........................V17
5577952 ..... TCF160R5SL25MB ........................V17
5577953 ..... TCF165R5SL25MB ........................V17
5577954 ..... TCF170R5SL25MB ........................V17
5577955 ..... TCF175R5SL25MB ........................V17
5577956 ..... TCF180R5SL25MB ........................V17
5577957 ..... TCF185R5SL25MB ................V17, V19
5578222 ..... CPNT060204T WP40PM ..................L5
5578539 ..... TCF370R2SL40MF ...........................V9
5578600 ..... TCF375R2SL40MF ...........................V9
5578601 ..... TCF380R2SL40MF ...........................V9
5578602 ..... TCF390R2SL40MF ...........................V9
5578603 ..... TCF400R2SL40MF ...........................V9
5578604 ..... TCF410R2SL40MF ...........................V9
5578605 ..... TCF420R2SL40MF ...........................V9
5578606 ..... TCF430R2SL40MF ...........................V9
5578607 ..... TCF440R2SL40MF .................... V9–10
5578608 ..... TCF450R2SL50MF .................... V9–10
5578609 ..... TCF370R3SL40MF .........................V12
5578610 ..... TCF375R3SL40MF .........................V12
5578611 ..... TCF380R3SL40MF .........................V12
5578612 ..... TCF390R3SL40MF .........................V12
5578613 ..... TCF400R3SL40MF .........................V12
5578614 ..... TCF410R3SL40MF .........................V12
5578615 ..... TCF420R3SL40MF .........................V12
5578616 ..... TCF430R3SL40MF .........................V12
5578617 ..... TCF440R3SL40MF .................. V12–13
5578618 ..... TCF450R3SL50MF .................. V12–13
5578619 ..... TCF370R4SL40MF .........................V15
5578620 ..... TCF375R4SL40MF .........................V15
5578621 ..... TCF380R4SL40MF .........................V15
5578622 ..... TCF390R4SL40MF .........................V15
5578623 ..... TCF400R4SL40MF .........................V15
5578624 ..... TCF410R4SL40MF .........................V15
5578625 ..... TCF420R4SL40MF .........................V15
5578626 ..... TCF430R4SL40MF .........................V15
5578627 ..... TCF440R4SL40MF .................. V15–16
5578628 ..... TCF450R4SL50MF .................. V15–16
5578629 ..... TCF370R5SL40MF .........................V18
5578640 ..... TCF375R5SL40MF .........................V18
5578641 ..... TCF380R5SL40MF .........................V18
5578642 ..... TCF390R5SL40MF .........................V18
5578643 ..... TCF400R5SL40MF .........................V18
5578644 ..... TCF410R5SL40MF .........................V18
5578645 ..... TCF420R5SL40MF .........................V18
5578646 ..... TCF430R5SL40MF .........................V18
5578647 ..... TCF440R5SL40MF .................. V18–19
5578648 ..... TCF450R5SL50MF .................. V18–19
5578694 ..... TCF460R2SL50MG ..........................V9
5578695 ..... TCF470R2SL50MG ..........................V9
5578696 ..... TCF480R2SL50MG ..........................V9
5578697 ..... TCF490R2SL50MG ..........................V9
5578698 ..... TCF500R2SL50MG ..........................V9
5578699 ..... TCF505R2SL50MG ..........................V9
5578710 ..... TCF510R2SL50MG ..........................V9
5578711 ..... TCF520R2SL50MG ..........................V9
5578712 ..... TCF530R2SL50MG ..........................V9
5578713 ..... TCF540R2SL50MG ..........................V9
5578714 ..... TCF550R2SL50MG ..........................V9
5578715 ..... TCF560R2SL50MG ................... V9–10
5578716 ..... TCF460R3SL50MG ........................V12
5578717 ..... TCF470R3SL50MG ........................V12
5578718 ..... TCF480R3SL50MG ........................V12
5578719 ..... TCF490R3SL50MG ........................V12
5578720 ..... TCF500R3SL50MG ........................V12
5578721 ..... TCF505R3SL50MG ........................V12
5578722 ..... TCF510R3SL50MG ........................V12
5578723 ..... TCF520R3SL50MG ........................V12
5578724 ..... TCF530R3SL50MG ........................V12
5578726 ..... TCF540R3SL50MG ........................V12
5578727 ..... TCF550R3SL50MG ........................V12
5578728 ..... TCF560R3SL50MG ................. V12–13
5578729 ..... TCF460R4SL50MG ........................V15
5578730 ..... TCF470R4SL50MG ........................V15
5578731 ..... TCF480R4SL50MG ........................V15
Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 68 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRANDO b 28 20153 09PM
Z69
widia.com
Index by Order Number
Order No. Catalogue No. Page(s)
5578732 ..... TCF490R4SL50MG ........................V15
5578733 ..... TCF500R4SL50MG ........................V15
5578734 ..... TCF505R4SL50MG ........................V15
5578735 ..... TCF510R4SL50MG ........................V15
5578736 ..... TCF520R4SL50MG ........................V15
5578737 ..... TCF530R4SL50MG ........................V15
5578738 ..... TCF540R4SL50MG ........................V15
5578739 ..... TCF550R4SL50MG ........................V15
5578750 ..... TCF560R4SL50MG ................. V15–16
5578751 ..... TCF460R5SL50MG ........................V18
5578752 ..... TCF470R5SL50MG ........................V18
5578753 ..... TCF480R5SL50MG ........................V18
5578754 ..... TCF490R5SL50MG ........................V18
5578755 ..... TCF500R5SL50MG ........................V18
5578756 ..... TCF505R5SL50MG ........................V18
5578757 ..... TCF510R5SL50MG ........................V18
5578758 ..... TCF520R5SL50MG ........................V18
5578759 ..... TCF530R5SL50MG ........................V18
5578760 ..... TCF540R5SL50MG ........................V18
5578761 ..... TCF550R5SL50MG ........................V18
5578762 ..... TCF560R5SL50MG ................. V18–19
5578820 ..... TCF190R2SL25MC ..........................V8
5578821 ..... TCF195R2SL25MC ..........................V8
5578822 ..... TCF200R2SL25MC ..........................V8
5578823 ..... TCF205R2SL25MC ..........................V8
5578824 ..... TCF210R2SL25MC ..........................V8
5578825 ..... TCF220R2SL25MC ..........................V8
5578826 ..... TCF225R2SL25MC ..........................V8
5578827 ..... TCF230R2SL25MC ..................V8, V10
5578828 ..... TCF190R3SL25MC ........................V11
5578829 ..... TCF195R3SL25MC ........................V11
5578830 ..... TCF200R3SL25MC ........................V11
5578831 ..... TCF205R3SL25MC ........................V11
5578832 ..... TCF210R3SL25MC ........................V11
5578833 ..... TCF220R3SL25MC ........................V11
5578834 ..... TCF225R3SL25MC ........................V11
5578835 ..... TCF230R3SL25MC ................V11, V13
5578836 ..... TCF190R4SL25MC ........................V14
5578837 ..... TCF195R4SL25MC ........................V14
5578838 ..... TCF200R4SL25MC ........................V14
5578839 ..... TCF205R4SL25MC ........................V14
5578840 ..... TCF210R4SL25MC ........................V14
5578841 ..... TCF220R4SL25MC ........................V14
5578842 ..... TCF225R4SL25MC ........................V14
5578843 ..... TCF230R4SL25MC ................V14, V16
5578844 ..... TCF190R5SL25MC ........................V17
5578845 ..... TCF195R5SL25MC ........................V17
5578846 ..... TCF200R5SL25MC ........................V17
5578847 ..... TCF205R5SL25MC ........................V17
5578848 ..... TCF210R5SL25MC ........................V17
5578849 ..... TCF220R5SL25MC ........................V17
5578850 ..... TCF225R5SL25MC ........................V17
5578851 ..... TCF230R5SL25MC ................V17, V19
5578866 ..... 577C04002T WP15PE .................. O24
5578867 ..... 577C04002W WP15PE ................. O24
5578868 ..... 577C04012T WP15PE .................. O24
5578894 ..... CNMG120404UR WS10PT ............ B43
5578895 ..... CNMG120404UR WS25PT ............ B43
5578896 ..... CNMG160608UR WS10PT ............ B43
5578897 ..... CNMG160608UR WS25PT ............ B43
5578898 ..... CNMG160612UR WS10PT ............ B43
5578900 ..... CNMG160616UR WS10PT ............ B43
5578901 ..... CNMG160616UR WS25PT ............ B43
5578902 ..... CNMG190612UR WS10PT ............ B43
5578990 ..... 577C05002T WP15PE .................. O24
5578991 ..... 577C05002W WP15PE ................. O24
5578992 ..... 577C06002T WP15PE .................. O24
5578993 ..... 577C06002W WP15PE ................. O24
5578994 ..... 577C06012T WP15PE .................. O24
5578995 ..... 577C07003T WP15PE .................. O24
5578996 ..... 577C07003W WP15PE ................. O24
5578997 ..... 577C08003T WP15PE .................. O24
5578998 ..... 577C08003W WP15PE ................. O24
5578999 ..... 577C08013T WP15PE .................. O24
5579021 ..... 577C09004T WP15PE .................. O24
5579022 ..... 577C09004W WP15PE ................. O24
5579023 ..... 577C10004T WP15PE .................. O24
5579024 ..... 577C10004W WP15PE ................. O24
5579025 ..... 577C10014T WP15PE .................. O24
5579026 ..... 577C12005T WP15PE .................. O24
5579027 ..... 577C12005W WP15PE ................. O24
5579028 ..... 577C12015T WP15PE .................. O24
5579029 ..... 577C14004T WP15PE .................. O24
5579040 ..... 577C14004W WP15PE ................. O24
5579041 ..... 577C14014T WP15PE .................. O24
5579042 ..... 577C16006T WP15PE .................. O24
5579043 ..... 577C16006W WP15PE ................. O24
5579044 ..... 577C16016T WP15PE .................. O24
5579045 ..... 577C18008T WP15PE .................. O24
5579046 ..... 577C18008W WP15PE ................. O24
5579047 ..... 577C20007T WP15PE .................. O24
5579048 ..... 577C20007W WP15PE ................. O24
5579049 ..... 577C20017T WP15PE .................. O24
5579060 ..... 577C25008T WP15PE .................. O24
5579061 ..... 577C25008W WP15PE ................. O24
5579234 ..... CNMG190616UR WS25PT ............ B43
5579271 ..... DNMG150408UR WS25PT ............ B62
5579276 ..... DNMG150608UR WS25PT ............ B62
5579292 ..... DNMG150412UR WS25PT ............ B62
5579350 ..... SNMG120412UR WS25PT ............ B75
5579352 ..... SNMG150612UR WS25PT ............ B75
5579357 ..... SNMG190616UR WS25PT ............ B75
5579395 ..... TNMG160408UR WS25PT............. B89
5579397 ..... TNMG220408UR WS25PT............. B89
5579405 ..... TNMG270612UR WS25PT............. B89
5579416 ..... VNMG160408UR WS25PT ............ B99
5579420 ..... WNMG080412UR WS10PT ......... B104
5583159 ..... 4U4006002T WP15PE .................. O59
5583420 ..... 4U4008003T WP15PE .................. O59
5583421 ..... 4U4010004T WP15PE .................. O59
5583422 ..... 4U4012005T WP15PE .................. O59
5583423 ..... 4U4016006T WP15PE .................. O59
5583424 ..... 4U4020007T WP15PE .................. O59
5583425 ..... 4U4025008T WP15PE .................. O59
5583426 ..... 4U7006002T WP15PE .................. O60
5583427 ..... 4U7008003T WP15PE .................. O60
5583428 ..... 4U7010004T WP15PE .................. O60
5583429 ..... 4U7012005T WP15PE .................. O60
5583430 ..... 4U7016006T WP15PE .................. O60
5583431 ..... 4U7016046T WP15PE .................. O60
5583432 ..... 4U7020007T WP15PE .................. O60
5583433 ..... 4U7020047T WP15PE .................. O60
5583434 ..... 4U7025008T WP15PE .................. O60
5583435 ..... 4U7025048T WP15PE .................. O60
5583436 ..... 4U7006002W WP15PE ................. O60
5583437 ..... 4U7008003W WP15PE ................. O60
5583438 ..... 4U7010004W WP15PE ................. O60
5583439 ..... 4U7012005W WP15PE ................. O60
5583440 ..... 4U7016006W WP15PE ................. O60
5583441 ..... 4U7020007W WP15PE ................. O60
5583442 ..... 4U7025008W WP15PE ................. O60
5598905 ..... 57NC16026W WS15PE ................. O25
5598906 ..... 57NC06002T WS15PE .................. O25
5598907 ..... 57NC06022T WS15PE .................. O25
5598908 ..... 57NC06022W WS15PE ................. O25
5598909 ..... 57NC06032T WS15PE .................. O25
5599070 ..... 57NC06032W WS15PE ................. O25
5599071 ..... 57NC06042W WS15PE ................. O25
5599072 ..... 57NC08003T WS15PE .................. O25
5599073 ..... 57NC08023T WS15PE .................. O25
5599074 ..... 57NC08023W WS15PE ................. O25
5599075 ..... 57NC08033T WS15PE .................. O25
5599076 ..... 57NC08033W WS15PE ................. O25
5599077 ..... 57NC08053W WS15PE ................. O25
5599078 ..... 57NC10004T WS15PE .................. O25
5599079 ..... 57NC10024T WS15PE .................. O25
5599080 ..... 57NC10024W WS15PE ................. O25
5599081 ..... 57NC10034T WS15PE .................. O25
5599082 ..... 57NC10034W WS15PE ................. O25
5599083 ..... 57NC10054T WS15PE .................. O25
5599084 ..... 57NC10054W WS15PE ................. O25
5599085 ..... 57NC12005T WS15PE .................. O25
5599086 ..... 57NC12025T WS15PE .................. O25
5599087 ..... 57NC12025W WS15PE ................. O25
5599088 ..... 57NC12035T WS15PE .................. O25
5599089 ..... 57NC12035W WS15PE ................. O25
5599090 ..... 57NC12055T WS15PE .................. O25
5599091 ..... 57NC12055W WS15PE ................. O25
5599092 ..... 57NC16006T WS15PE .................. O25
5599093 ..... 57NC16026T WS15PE .................. O25
5599094 ..... 57NC16036T WS15PE .................. O25
5599095 ..... 57NC16036W WS15PE ................. O25
5599096 ..... 57NC16056T WS15PE .................. O25
5599097 ..... 57NC16056W WS15PE ................. O25
5599098 ..... 57NC16076T WS15PE .................. O26
5599099 ..... 57NC16076W WS15PE ................. O26
5599100 ..... 57NC20007T WS15PE .................. O26
5599101 ..... 57NC20027T WS15PE .................. O26
5599102 ..... 57NC20027W WS15PE ................. O26
5599103 ..... 57NC20037T WS15PE .................. O26
5599104 ..... 57NC20037W WS15PE ................. O26
5599105 ..... 57NC20057T WS15PE .................. O26
5599106 ..... 57NC20057W WS15PE ................. O26
5599107 ..... 57NC20077T WS15PE .................. O26
5599108 ..... 57NC20077W WS15PE ................. O26
5599109 ..... 57NC20087T WS15PE .................. O26
5599110 ..... 57NC20087W WS15PE ................. O26
5599111 ..... 57NC25008T WS15PE .................. O26
5599112 ..... 57NC25028T WS15PE .................. O26
5599113 ..... 57NC25028W WS15PE ................. O26
5599114 ..... 57NC25038T WS15PE .................. O26
5599115 ..... 57NC25038W WS15PE ................. O26
5599116 ..... 57NC25058T WS15PE .................. O26
5599117 ..... 57NC25058W WS15PE ................. O26
5599118 ..... 57NC25078T WS15PE .................. O26
5599119 ..... 57NC25078W WS15PE ................. O26
5599120 ..... 57NC25088T WS15PE .................. O26
5599121 ..... 57NC25088W WS15PE ................. O26
5599122 ..... 57NE10004T WS15PE .................. O33
5599123 ..... 57NE10024T WS15PE .................. O33
5599124 ..... 57NE10024W WS15PE ................. O33
5599125 ..... 57NE10034T WS15PE .................. O33
5599126 ..... 57NE10034W WS15PE ................. O33
5599127 ..... 57NE10054T WS15PE .................. O33
5599128 ..... 57NE10054W WS15PE ................. O33
5599129 ..... 57NE12005V WS15PE .................. O33
5599130 ..... 57NE12025V WS15PE .................. O33
5599131 ..... 57NE12025W WS15PE ................. O33
5599132 ..... 57NE12035V WS15PE .................. O33
5599133 ..... 57NE12035W WS15PE ................. O33
5599134 ..... 57NE12055V WS15PE .................. O33
5599135 ..... 57NE12055W WS15PE ................. O33
5599136 ..... 57NE16006V WS15PE .................. O33
5599137 ..... 57NE16026V WS15PE .................. O33
5599138 ..... 57NE16026W WS15PE ................. O33
5599139 ..... 57NE16036V WS15PE .................. O33
5599140 ..... 57NE16036W WS15PE ................. O33
5599141 ..... 57NE16056V WS15PE .................. O33
5599142 ..... 57NE16056W WS15PE ................. O33
5599143 ..... 57NE20007V WS15PE .................. O33
5599144 ..... 57NE20027V WS15PE .................. O33
5599145 ..... 57NE20027W WS15PE ................. O33
5599146 ..... 57NE20037V WS15PE .................. O33
5599147 ..... 57NE20037W WS15PE ................. O33
5599148 ..... 57NE20057V WS15PE .................. O33
5599149 ..... 57NE20057W WS15PE ................. O33
5599160 ..... 57NE20087V WS15PE .................. O33
5599161 ..... 57NE20087W WS15PE ................. O33
5599162 ..... 57NE25008V WS15PE .................. O33
5599163 ..... 57NE25028V WS15PE .................. O33
5599164 ..... 57NE25028W WS15PE ................. O33
5599165 ..... 57NE25038V WS15PE .................. O33
5599166 ..... 57NE25038W WS15PE ................. O33
5599167 ..... 57NE25058V WS15PE .................. O33
5599168 ..... 57NE25058W WS15PE ................. O33
5599169 ..... 57NE25088V WS15PE .................. O33
5599170 ..... 57NE25088W WS15PE ................. O33
5599171 ..... 577E10004T WS15PE .................. O32
5599172 ..... 577E10024T WS15PE .................. O32
5599173 ..... 577E10024W WS15PE ................. O32
5599174 ..... 577E12005V WS15PE .................. O32
5599175 ..... 577E12015V WS15PE .................. O32
5599176 ..... 577E12015W WS15PE ................. O32
5599177 ..... 577E16006V WS15PE .................. O32
5599178 ..... 577E16016V WS15PE .................. O32
5599179 ..... 577E16016W WS15PE ................. O32
5599180 ..... 577E20007V WS15PE .................. O32
5599181 ..... 577E20017V WS15PE .................. O32
5599182 ..... 577E20017W WS15PE ................. O32
5599183 ..... 577E25018V WS15PE .................. O32
5599184 ..... 577E25018W WS15PE ................. O32
5622622 ..... XNGJ0905ANSNGD3W WK15CM
.......................................................................... H35
5623158 ..... CCMT060208MU WK20CT ............ B33
5623159 ..... CCMT060208MU WM25CT ........... B33
5623344 ..... CCMT060202FW WP15CT ............ B32
5623345 ..... CCMT060204FW WP15CT ............ B32
5623346 ..... CCMT060204FW WM15CT ........... B32
5623347 ..... CCMT060208FW WP15CT ............ B32
5623348 ..... CCMT060208FW WM15CT ........... B32
5623349 ..... CCMT09T304FW WP15CT ............ B32
5623420 ..... CCMT090304MU WP25CT ............ B33
5623421 ..... CCMT090304MU WM25CT ........... B33
5623423 ..... CCMT090308MU WM25CT ........... B33
5623424 ..... CCMT090308MU WP25CT ............ B33
5623425 ..... CCMT090308MU WP15CT ............ B33
5623426 ..... CCMT09T304MU WS25PT ............ B33
5623427 ..... CCMT09T304MU WM25CT ........... B33
5623428 ..... CCMT09T304MU WS10PT ............ B33
5623429 ..... CCMT09T304MU WK05CT ............ B33
5623430 ..... CCMT09T304MU WP25CT ............ B33
5623431 ..... CCMT09T304MU WP15CT ............ B33
5623432 ..... CCMT09T304MU WK20CT ............ B33
5623433 ..... CCMT09T308MU WK20CT ............ B33
Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 69 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRAND O b 28 2015 3 09 PM
Z70 widia.com
Index by Order Number
Order No. Catalogue No. Page(s)
5623434 ..... CCMT09T308MU WP15CT ............ B33
5623435 ..... CCMT09T308MU WM25CT ........... B33
5623436 ..... CCMT09T308MU WP25CT ............ B33
5623437 ..... CCMT09T308MU WS25PT ............ B33
5623438 ..... CCMT09T308MU WS10PT ............ B33
5623439 ..... CCMT09T308MU WP35CT ............ B33
5623440 ..... CCMT120408MU WP15CT ............ B33
5623441 ..... CCMT120408MU WK20CT ............ B33
5623442 ..... CCMT120408MU WM25CT ........... B33
5623443 ..... CCMT120408MU WP25CT ............ B33
5623444 ..... CCMT120408MU WS25PT ............ B33
5623445 ..... SCMT090308MU WK20CT ............ B69
5623446 ..... SCMT090308MU WP15CT ............ B69
5623447 ..... SCMT09T304MU WM25CT ........... B69
5623448 ..... SCMT09T308MU WM25CT ........... B69
5623449 ..... SCMT09T308MU WK20CT ............ B69
5623460 ..... SCMT09T308MU WS10PT ............ B69
5623461 ..... SCMT09T308MU WP15CT ............ B69
5623462 ..... SCMT09T308MU WP35CT ............ B69
5623464 ..... SCMT09T308MU WP25CT ............ B69
5623470 ..... CCMT09T304FW WM15CT ........... B32
5623471 ..... CCMT09T304MW WP15CT ........... B33
5623472 ..... CCMT09T304MW WP25CT ........... B33
5623473 ..... CCMT09T308FW WP15CT ............ B32
5623474 ..... CCMT09T308MW WP15CT ........... B33
5623475 ..... CCMT09T308MW WP25CT ........... B33
5623476 ..... CCMT120404MW WP15CT ........... B33
5623477 ..... CCMT120404MW WP25CT ........... B33
5623478 ..... CCMT120408MW WP15CT ........... B33
5623479 ..... CCMT120408MW WP25CT ........... B33
5623480 ..... CNMG120408FW WP15CT ........... B38
5623481 ..... CNMG120412FW WP15CT ........... B38
5623482 ..... DCMT11T304FW WP15CT ............ B48
5623483 ..... DCMT11T304FW WM15CT ........... B48
5623484 ..... DCMT11T304MW WP15CT ........... B50
5623485 ..... DCMT11T304MW WP25CT ........... B50
5623486 ..... DCMT11T308FW WP15CT ............ B48
5623487 ..... DCMT11T308FW WM15CT ........... B48
5623488 ..... DCMT11T308MW WP15CT ........... B50
5623489 ..... DCMT11T308MW WP25CT ........... B50
5623490 ..... DNMG110404FW WP15CT ........... B55
5623491 ..... DNMG110408FW WP15CT ........... B55
5623492 ..... DNMG150404FW WP15CT ........... B55
5623493 ..... DNMG150408FW WP15CT ........... B55
5623494 ..... DNMG150408MW WP15CT .......... B58
5623495 ..... DNMG150408MW WP25CT .......... B58
5623496 ..... DNMG150604FW WP15CT ........... B55
5623497 ..... DNMG150608FW WP15CT ........... B55
5623498 ..... DNMG150608MW WP15CT .......... B58
5623499 ..... DNMG150608MW WP25CT .......... B58
5623510 ..... WNMG060404FW WP15CT ........ B101
5623511 ..... WNMG060408FW WP15CT ........ B101
5623512 ..... WNMG060408MW WP15CT ....... B102
5623513 ..... WNMG060408MW WP25CT ....... B102
5623514 ..... WNMG080404FW WP15CT ........ B101
5623515 ..... WNMG080408FW WP15CT ........ B101
5623516 ..... WNMG080408MW WP15CT ....... B102
5623517 ..... WNMG080408MW WP25CT ....... B102
5623581 ..... DCMT11T304MU WM25CT ........... B49
5623582 ..... DCMT11T304MU WS10PT ............ B49
5623583 ..... DCMT11T304MU WP25CT ............ B49
5623584 ..... DCMT11T304MU WS25PT ............ B49
5623585 ..... DCMT11T304MU WP15CT ............ B49
5623586 ..... DCMT11T304MU WK05CT ............ B49
5623587 ..... DCMT11T304MU WK20CT ............ B49
5623588 ..... DCMT11T308MU WM25CT ........... B49
5623589 ..... DCMT11T308MU WK20CT ............ B49
5623600 ..... DCMT11T308MU WP15CT ............ B49
5623601 ..... DCMT11T308MU WS10PT ............ B49
5623602 ..... DCMT11T308MU WK05CT ............ B49
5623603 ..... DCMT11T308MU WS25PT ............ B49
5623604 ..... DCMT150408MU WM25CT ........... B49
5623605 ..... DCMT150408MU WK05CT ............ B49
5623606 ..... DCMT150408MU WP15CT ............ B49
5623607 ..... DCMT150408MU WK20CT ............ B49
5623608 ..... DCMT150408MU WP25CT ............ B49
5623609 ..... DCMT150408MU WS10PT ............ B49
5623610 ..... DCMT150408MU WS25PT ............ B49
5623611 ..... DCMT150412MU WK05CT ............ B49
5623612 ..... DCMT150412MU WK20CT ............ B49
5623613 ..... TCMT16T304MU WM25CT ........... B83
5623614 ..... TCMT16T304MU WP15CT ............ B83
5623615 ..... TCMT16T304MU WP25CT ............ B83
5623616 ..... TCMT16T304MU WK20CT ............ B83
5623617 ..... TCMT16T304MU WS25PT ............ B83
5623618 ..... TCMT16T308MU WK20CT ............ B83
5623619 ..... TCMT16T308MU WM25CT ........... B83
5623620 ..... TCMT16T308MU WP25CT ............ B83
5623621 ..... TCMT16T308MU WP15CT ............ B83
5623622 ..... TCMT16T308MU WS10PT ............ B83
5642230 ..... XDCT110404PDERML WP40PM .......J9
5642231 ..... XDPT110404PDSRMM WP40PM ...J10
5642232 ..... XDPT110412PDSRMM WP40PM ...J10
5642233 ..... XDPT110416PDSRMM WP40PM ...J10
5642234 ..... XDPT110431PDSRMM WP40PM ...J10
5642235 ..... XDPT110412PDSRMH WP40PM ....J10
5642236 ..... XDPT110416PDSRMH WP40PM ....J10
5642237 ..... XDPT110404PDSRMM WP25PM ...J10
5645217 ..... CNMG120404UM WS10PT ........... B42
5645219 ..... CNMG120408UM WP25CT ........... B42
5645250 ..... CNMG120408UM WP15CT ........... B42
5645251 ..... DNMG150408UM WS10PT ........... B61
5645253 ..... DNMG150608UM WS10PT ........... B61
5645254 ..... DNMG150404UM WS10PT ........... B61
5645255 ..... DNMG150604UM WS10PT ........... B61
5645256 ..... DNMG110408UM WS10PT ........... B61
5645257 ..... DNMG150612UM WS25PT ........... B61
5645258 ..... DNMG150612UM WS10PT ........... B61
5645259 ..... DNMG150412UM WS10PT ........... B61
5645260 ..... DNMG150408UM WP15CT ........... B61
5645261 ..... DNMG150408UM WP25CT ........... B61
5645262 ..... DNMG150608UM WP25CT ........... B61
5645264 ..... DNMG150608UM WS25PT ........... B61
5645265 ..... TNMG220408UM WS10PT ............ B88
5645266 ..... TNMG220408UM WP15CT............ B88
5645267 ..... WNMG060408UM WS10PT ........ B104
5645268 ..... WNMG060404UM WS10PT ........ B104
5645269 ..... WNMG080412UM WS10PT ........ B104
5645270 ..... WNMG080408UM WP25CT ........ B104
5645271 ..... WNMG080412UM WP15CT ........ B104
5645588 ..... CNMG120408UF WS10PT............. B42
5645589 ..... CNMG120404UF WP15CT ............ B42
5645600 ..... CNMG120404UF WS10PT............. B42
5645601 ..... DNMG150404UF WS10PT ............ B60
5645602 ..... DNMG150408UF WS10PT ............ B60
5645603 ..... DNMG110404UF WS10PT ............ B60
5645604 ..... DNMG110408UF WS10PT ............ B60
5645605 ..... DNMG150408UF WP25CT ............ B60
5645606 ..... DNMG150408UF WP15CT ............ B60
5645607 ..... DNMG150608UF WS10PT ............ B60
5645608 ..... DNMG150604UF WS10PT ............ B60
5645609 ..... DNMG150608UF WP25CT ............ B60
5645610 ..... SNMG120404UF WS10PT ............. B74
5645611 ..... SNMG120408UF WS10PT ............. B74
5645612 ..... TNMG220404UF WS10PT ............. B88
5645613 ..... TNMG160412UF WS10PT ............. B88
5645614 ..... TNMG220408UF WS10PT ............. B88
5645615 ..... TNMG160408UF WP15CT ............. B88
5645616 ..... VNMG160404UF WS10PT ............. B98
5645617 ..... VNMG160408UF WS10PT ............. B98
5645618 ..... VNMG160408UF WP15CT ............. B98
5645619 ..... WNMG080404UF WS10PT .......... B103
5645621 ..... WNMG060404UF WS10PT .......... B103
5645622 ..... WNMG060408UF WS10PT .......... B103
5645623 ..... WNMG080408UF WS10PT .......... B103
5645624 ..... WNMG080412UF WS10PT .......... B103
5661464 ..... TDS501A03571 WU25PD ..............T82
5661502 ..... TDS501A04623 WU25PD ..............T82
5661503 ..... TDS501A04763 WU25PD ..............T83
5661504 ..... TDS501A05410 WU25PD ..............T83
5661505 ..... TDS501A05558 WU25PD ..............T83
5661506 ..... TDS501A06528 WU25PD ..............T83
5661507 ..... TDS501A06746 WU25PD ..............T83
5661509 ..... TDS501A07145 WU25PD ..............T83
5661540 ..... TDS501A07938 WU25PD ..............T84
5661541 ..... TDS501A08334 WU25PD ..............T84
5661542 ..... TDS501A08433 WU25PD ..............T84
5661543 ..... TDS501A08733 WU25PD ..............T84
5661544 ..... TDS501A09347 WU25PD ..............T84
5661546 ..... TDS501A09750 WU25PD ..............T84
5661547 ..... TDS501A10716 WU25PD ..............T85
5661548 ..... TDS501A12304 WU25PD ..............T85
5680085 ..... CNMG120408UR WK20CT ............ B43
5680086 ..... CNMG120408UR WK05CT ............ B43
5680087 ..... CNMG120412UR WK05CT ............ B43
5680088 ..... CNMG190612UR WK05CT ............ B43
5680089 ..... CNMG120416UR WS10PT ............ B43
5680170 ..... CNMG120416UR WS25PT ............ B43
5680171 ..... DNMG150416UR WS10PT ............ B62
5680172 ..... DNMG150612UR WK05CT ............ B62
5680173 ..... SNMG120416UR WS25PT ............ B75
5680174 ..... SNMG120416UR WS10PT ............ B75
5680175 ..... TNMG160412UR WS25PT............. B89
5680176 ..... VNMG160412UR WS10PT ............ B99
5680177 ..... WNMG060408UR WS25PT ......... B104
5680178 ..... WNMG060408UR WS10PT ......... B104
5680179 ..... WNMG080408UR WK05CT ......... B104
5684271 ..... CNMG120404FF WS10PT ............. B37
5684272 ..... CNMG120408FF WS10PT ............. B37
5684273 ..... DNMG110404FF WS10PT ............. B54
5684274 ..... DNMG150404FF WS10PT ............. B54
5684275 ..... DNMG150408FF WS10PT ............. B54
5684276 ..... DNMG150604FF WS10PT ............. B54
5684277 ..... SNMG090308FF WS10PT ............. B72
5684278 ..... SNMG120408FF WS10PT ............. B72
5684279 ..... SNMG090304FF WS10PT ............. B72
5684330 ..... SNMG120404FF WS10PT ............. B72
5684331 ..... TNMG110304FF WS10PT ............. B84
5684332 ..... TNMG110308FF WS10PT ............. B84
5684333 ..... VNMG160408FF WS10PT ............. B97
5684334 ..... VNMG160404FF WS10PT ............. B97
5684335 ..... WNMG080408FF WS10PT .......... B100
5684336 ..... WNMG080404FF WS10PT .......... B100
5684337 ..... CCMT060204FP WS10PT ............. B31
5684338 ..... CCMT09T308FP WS25PT ............. B31
5684340 ..... CCMT060204FP WS25PT ............. B31
5684341 ..... CCMT09T304FP WS10PT ............. B31
5684342 ..... CCMT060208FP WS10PT ............. B31
5684343 ..... CCMT09T304FP WS25PT ............. B31
5684344 ..... CCMT060208FP WS25PT ............. B31
5684346 ..... CNMG120416ML WP25CT............ B38
5684347 ..... TNMG110304ML WP25CT ............ B85
5684348 ..... TNMG220404ML WP15CT ............ B85
5684349 ..... CCMT120408MP WS10PT ............ B32
5684350 ..... CCMT09T308MP WS10PT ............ B32
5684351 ..... CCMT060204MP WS10PT ............ B32
5684352 ..... CCMT09T304MP WS10PT ............ B32
5684353 ..... CNMG120416MR WP25CT ........... B39
5684354 ..... SNMG120412MR WP15CT ........... B73
5684355 ..... SNMG120412MR WP25CT ........... B73
5684356 ..... CNMG120408RH WP35CT ............ B41
5696071 ..... A25RDCLNR12KC04 WG ............... C56
5696072 ..... A25RDCLNL12KC04 WG ............... C56
5696073 ..... A32SDCLNR12KC04 WG ............... C56
5696074 ..... A32SDCLNL12KC04 WG ............... C56
5696075 ..... A40TDCLNR12KC04 WG ............... C56
5696076 ..... A40TDCLNL12KC04 WG ............... C56
5696077 ..... A40TDCLNR16KC06 WG ............... C56
5696078 ..... A40TDCLNL16KC06 WG ............... C56
5696079 ..... A25RDDPNR11KC04 WG .............. C56
5696080 ..... A32SDDPNR15KC06 WG............... C56
5696081 ..... A32SDDPNL15KC06 WG ............... C56
5696082 ..... A40TDDPNR15KC06 WG ............... C56
5696083 ..... A40TDDPNL15KC06 WG ............... C56
5696085 ..... A32SDDQNR15KC06 WG .............. C57
5696086 ..... A32SDDQNL15KC06 WG............... C57
5696087 ..... A40TDDQNR15KC06 WG .............. C57
5696088 ..... A40TDDQNL15KC06 WG ............... C57
5696089 ..... A25RDDUNR11KC04 WG .............. C57
5696210 ..... A25RDDUNL11KC04 WG ............... C57
5696211 ..... A32SDDUNR11KC04 WG .............. C57
5696212 ..... A32SDDUNL11KC04 WG ............... C57
5696213 ..... A32SDDUNR15KC06 WG .............. C57
5696214 ..... A32SDDUNL15KC06 WG ............... C57
5696215 ..... A40TDDUNR15KC06 WG ............... C57
5696216 ..... A40TDDUNL15KC06 WG ............... C57
5696217 ..... A50UDDUNR15KC06 WG .............. C57
5696218 ..... A50UDDUNL15KC06 WG ............... C57
5696219 ..... A25RDTFNR16KC04 WG ............... C58
5696260 ..... A25RDTFNL16KC04 WG ............... C58
5696261 ..... A32SDTFNR16KC04 WG ............... C58
5696262 ..... A32SDTFNL16KC04 WG................ C58
5696263 ..... A32SDVUNR16KC04 WG ............... C58
5696264 ..... A32SDVUNL16KC04 WG ............... C58
5696265 ..... A40TDVUNR16KC04 WG ............... C58
5696266 ..... A40TDVUNL16KC04 WG ............... C58
5696267 ..... A25RDWLNR06KC04 WG .............. C59
5696268 ..... A25RDWLNL06KC04 WG .............. C59
5696269 ..... A25RDWLNR08KC04 WG .............. C59
5696280 ..... A25RDWLNL08KC04 WG .............. C59
5696281 ..... A32SDWLNR08KC04 WG .............. C59
5696282 ..... A32SDWLNL08KC04 WG .............. C59
5696283 ..... A40TDWLNR08KC04 WG .............. C59
5696284 ..... A40TDWLNL08KC04 WG .............. C59
5696553 ..... SNMM12040865 WM25CT ........... B76
5696554 ..... SNMM12040865 WP25CT ............ B76
5696555 ..... SNMM12040865 WP35CT ............ B76
5696556 ..... SNMM12041265 WM25CT ........... B76
5696557 ..... SNMM12041265 WP25CT ............ B76
5696558 ..... SNMM15061665 WM25CT ........... B76
5696559 ..... SNMM15061665 WP25CT ............ B76
5696610 ..... SNMM19061265 WM25CT ........... B76
5696611 ..... SNMM19061265 WP15CT ............ B76
5696612 ..... SNMM19061265 WP25CT ............ B76
Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 70 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRANDO b 28 20153 09PM
Z71
widia.com
Index by Order Number
Order No. Catalogue No. Page(s)
5696613 ..... SNMM19061265 WP35CT ............ B76
5696614 ..... SNMM19061665 WM25CT ........... B76
5696615 ..... SNMM19061665 WP15CT ............ B76
5696616 ..... SNMM19062465 WM25CT ........... B76
5696617 ..... SNMM19062465 WP25CT ............ B76
5696618 ..... TNMM16040865 WP25CT ............ B90
5696619 ..... TNMM16040865 WP35CT ............ B90
5696620 ..... TNMM16041265 WP35CT ............ B90
5696621 ..... TNMM22040865 WP15CT ............ B90
5696622 ..... TNMM22040865 WP25CT ............ B90
5696623 ..... TNMM22040865 WP35CT ............ B90
5696624 ..... TNMM22041265 WM25CT ........... B90
5696625 ..... TNMM22041265 WP25CT ............ B90
5696626 ..... TNMM22041265 WP35CT ............ B90
5696627 ..... TNMM22041665 WM25CT ........... B90
5696628 ..... TNMM22041665 WP15CT ............ B90
5696629 ..... TNMM22041665 WP25CT ............ B90
5696642 ..... CNMM190616SR WM25CT........... B44
5696643 ..... CNMM190616SR WP15CT ........... B44
5696644 ..... CNMM190624SR WP35CT ........... B44
5696645 ..... CNMM250924SR WP15CT ........... B44
5696646 ..... CNMM250924SR WP25CT ........... B44
5696647 ..... CNMM250924SR WP35CT ........... B44
5696648 ..... SNMM190616SR WM25CT ........... B76
5696649 ..... SNMM190624SR WM25CT ........... B76
5696680 ..... SNMM190624SR WP15CT ............ B76
5696681 ..... SNMM190624SR WP25CT ............ B76
5696682 ..... DSKNL2525M12KC04 WG ............ C13
5696683 ..... DSKNL3225P12KC04 WG ............. C13
5696684 ..... DSKNL3232P15KC06 WG ............. C13
5696685 ..... DSKNR2020K12KC04 WG ............. C13
5696686 ..... DSKNR2525M12KC04 WG ............ C13
5696687 ..... DSKNR3225P12KC04 WG ............. C13
5696688 ..... DSKNR3232P15KC06 WG ............. C13
5696689 ..... DSKNR3232P19KC06 WG ............. C13
5696700 ..... DSRNL2525M12KC04 WG ............ C14
5696701 ..... DSRNL3232P15KC06 WG ............. C14
5696702 ..... DSRNL4040S25KC09 WG ............. C14
5696703 ..... DSRNR2020K12KC04 WG ............. C14
5696704 ..... DSRNR2525M12KC04 WG ............ C14
5696705 ..... DSRNR3232P15KC06 WG ............. C14
5696706 ..... DSRNR3232P19KC06 WG ............. C14
5696707 ..... DSRNR4040S25KC09 WG ............. C14
5696708 ..... DSSNL2020K12KC04 WG ............. C15
5696709 ..... DSSNL2525M12KC04 WG ............ C15
5696710 ..... DSSNL3225P12KC04 WG ............. C15
5696711 ..... DSSNL3232P15KC06 WG ............. C15
5696712 ..... DSSNL3232P19KC06 WG ............. C15
5696713 ..... DSSNR2020K12KC04 WG ............. C15
5696714 ..... DSSNR2525M12KC04 WG ............ C15
5696715 ..... DSSNR2525M15KC06 WG ............ C15
5696716 ..... DSSNR3225P12KC04 WG ............. C15
5696717 ..... DSSNR3232P15KC06 WG ............. C15
5696718 ..... DSSNR3232P19KC06 WG ............. C15
5696719 ..... DTFNL2020K16KC04 WG.............. C16
5696720 ..... DTFNL2525M16KC04 WG ............. C16
5696721 ..... DTFNL2525M22KC04 WG ............. C16
5696722 ..... DTFNL3225P16KC04 WG.............. C16
5696723 ..... DTFNL3225P22KC04 WG.............. C16
5696724 ..... DTFNR2020K16KC04 WG ............. C16
5696725 ..... DTFNR2525M16KC04 WG ............ C16
5696726 ..... DTFNR3232P27KC06 WG ............. C16
5696727 ..... DTGNL2020K16KC04 WG ............. C16
5696728 ..... DTGNL2525M16KC04 WG ............ C16
5696729 ..... DTGNR2020K16KC04 WG ............. C16
5696730 ..... DTGNR2525M16KC04 WG ............ C16
5696731 ..... DTGNR2525M22KC04 WG ............ C16
5696732 ..... DVJNL2020K16KC04 WG.............. C17
5696733 ..... DVJNL2525M16KC04 WG ............. C17
5696734 ..... DVJNL2525M22KC04 WG ............. C17
5696735 ..... DVJNL3225P16KC04 WG.............. C17
5696736 ..... DVJNL3225P22KC04 WG.............. C17
5696737 ..... DVJNR2020K16KC04 WG ............. C17
5696738 ..... DVJNR2525M16KC04 WG ............ C17
5696739 ..... DVJNR2525M22KC04 WG ............ C17
5696740 ..... DVJNR3225P16KC04 WG ............. C17
5696741 ..... DVJNR3225P22KC04 WG ............. C17
5696742 ..... DVONL2020K16KC04 WG ............. C18
5696743 ..... DVONL2525M16KC04 WG ............ C18
5696744 ..... DVONL3225P16KC04 WG ............. C18
5696745 ..... DVONR2020K16KC04 WG............. C18
5696746 ..... DVONR2525M16KC04 WG ............ C18
5696747 ..... DVONR3225P16KC04 WG............. C18
5696748 ..... DVVNN2020K16KC04 WG ............. C18
5696749 ..... DVVNN2525M16KC04 WG ............ C18
5696750 ..... DVVNN3225P16KC04 WG ............. C18
5696751 ..... DWLNL2020K06KC04 WG ............ C19
5696752 ..... DWLNL2020K08KC04 WG ............ C19
5696753 ..... DWLNL2525M06KC04 WG ........... C19
5696754 ..... DWLNL2525M08KC04 WG ........... C19
5696755 ..... DWLNL3225P08KC04 WG ............ C19
5696756 ..... DWLNL3232P08KC04 WG ............ C19
5696757 ..... DWLNR2020K06KC04 WG ............ C19
5696758 ..... DWLNR2020K08KC04 WG ............ C19
5696759 ..... DWLNR2525M06KC04 WG ........... C19
5696760 ..... DWLNR2525M08KC04 WG ........... C19
5696761 ..... DWLNR3225P08KC04 WG ............ C19
5696762 ..... DWLNR3232P08KC04 WG ............ C19
5697853 ..... DCKNL2020K12KC04 WG ............... C8
5697854 ..... DCKNL2525M12KC04 WG .............. C8
5697855 ..... DCKNL3225P12KC04 WG ............... C8
5697856 ..... DCKNR2020K12KC04 WG ............... C8
5697857 ..... DCKNR2525M12KC04 WG .............. C8
5697858 ..... DCKNR3225P12KC04 WG ............... C8
5697859 ..... DCKNR3232P16KC06 WG ............... C8
5697880 ..... DCKNR3232P19KC06 WG ............... C8
5697881 ..... DCLNL1616H09KC03 WG ............... C9
5697882 ..... DCLNL2020K09KC03 WG ............... C9
5697883 ..... DCLNL2020K12KC04 WG ............... C9
5697884 ..... DCLNL2525M12KC04 WG .............. C9
5697885 ..... DCLNL2525M16KC06 WG .............. C9
5697886 ..... DCLNL3232P16KC06 WG ............... C9
5697887 ..... DCLNL3232P19KC06 WG ............... C9
5697888 ..... DCLNL4040S19KC06 WG ............... C9
5697889 ..... DCLNL4040S25KC09 WG ............... C9
5697890 ..... DCLNR1616H09KC03 WG ............... C9
5697891 ..... DCLNR2020K09KC03 WG ............... C9
5697892 ..... DCLNR2020K12KC04 WG ............... C9
5697893 ..... DCLNR2525M12KC04 WG .............. C9
5697894 ..... DCLNR2525M16KC06 WG .............. C9
5697895 ..... DCLNR3232P16KC06 WG ............... C9
5697896 ..... DCLNR3232P19KC06 WG ............... C9
5697897 ..... DCLNR4040S19KC06 WG ............... C9
5697898 ..... DCLNR4040S25KC09 WG ............... C9
5697899 ..... DCRNL2020K12KC04 WG ............. C10
5697900 ..... DCRNL2525M12KC04 WG ............ C10
5697901 ..... DCRNL3225P12KC04 WG ............. C10
5697902 ..... DCRNL3232P16KC06 WG ............. C10
5697903 ..... DCRNR2020K12KC04 WG............. C10
5697904 ..... DCRNR2525M12KC04 WG ............ C10
5697905 ..... DCRNR3225P12KC04 WG............. C10
5697906 ..... DCRNR3232P16KC06 WG............. C10
5697907 ..... DCRNR3232P19KC06 WG............. C10
5697908 ..... DCSNL2020K12KC04 WG ............. C10
5697909 ..... DCSNL2525M12KC04 WG ............ C10
5697911 ..... DCSNR2020K12KC04 WG ............. C10
5697913 ..... DCSNR2525M12KC04 WG ............ C10
5697915 ..... DDJNL2020K11KC04 WG ............. C11
5697916 ..... DDJNL2020K15KC06 WG ............. C11
5697918 ..... DDJNL2525M11KC04 WG ............ C11
5697920 ..... DDJNL2525M15KC06 WG ............ C11
5697922 ..... DDJNL3225P15KC06 WG ............. C11
5697924 ..... DDJNR2020K11KC04 WG ............. C11
5697926 ..... DDJNR2020K15KC06 WG ............. C11
5697928 ..... DDJNR2525M11KC04 WG ............ C11
5697930 ..... DDJNR2525M15KC06 WG ............ C11
5697932 ..... DDJNR3225P15KC06 WG ............. C11
5697934 ..... DDNNL2020K15KC06 WG ............. C11
5697936 ..... DDNNL2525M15KC06 WG ............ C11
5697938 ..... DDNNL3225P15KC06 WG ............. C11
5697940 ..... DDNNR2020K15KC06 WG ............ C11
5697942 ..... DDNNR2525M15KC06 WG ........... C11
5697944 ..... DRGNL3225P12KC04 WG ............. C12
5697946 ..... DRGNL4040S25KC09 WG ............. C12
5697948 ..... DRGNR2525M12KC04 WG............ C12
5697950 ..... DRGNR3225P12KC04 WG ............ C12
5697952 ..... DRGNR4040S25KC09 WG ............ C12
5697954 ..... DSDNN2020K12KC04 WG ............ C12
5697955 ..... DSDNN2525M12KC04 WG ........... C12
5697957 ..... DSDNN2525M15KC06 WG ........... C12
5697959 ..... DSDNN3225P12KC04 WG ............ C12
5697961 ..... DSDNN3232P19KC06 WG ............ C12
5697963 ..... DSDNN4040S25KC09 WG ............ C12
5698342 ..... WOEJ120712SRMR WP40PM .......M14
5698343 ..... WOEJ120712SRMR WP25PM .......M14
5698347 ..... CNMM12040865 WM25CT ........... B44
5698348 ..... CNMM12040865 WP15CT............ B44
5698349 ..... CNMM12040865 WP25CT............ B44
5698360 ..... CNMM12040865 WP35CT............ B44
5698361 ..... CNMM12041265 WM25CT ........... B44
5698362 ..... CNMM12041265 WP15CT............ B44
5698363 ..... CNMM12041265 WP25CT............ B44
5698364 ..... CNMM12041665 WM25CT ........... B44
5698365 ..... CNMM12041665 WP25CT............ B44
5698366 ..... CNMM16060865 WP25CT............ B44
5698367 ..... CNMM16060865 WP35CT............ B44
5698368 ..... CNMM16061265 WM25CT ........... B44
5698369 ..... CNMM16061265 WP15CT............ B44
5698370 ..... CNMM16061265 WP25CT............ B44
5698371 ..... CNMM16061265 WP35CT............ B44
5698372 ..... CNMM16061665 WP15CT............ B44
5698373 ..... CNMM16061665 WP25CT............ B44
5698374 ..... CNMM19061265 WM25CT ........... B44
5698376 ..... CNMM19061265 WP35CT............ B44
5698377 ..... CNMM19061665 WM25CT ........... B44
5698378 ..... CNMM19061665 WP15CT............ B44
5698379 ..... CNMM19062465 WM25CT ........... B44
5698410 ..... CNMM19062465 WP15CT............ B44
5698411 ..... CNMM19062465 WP25CT............ B44
5698412 ..... DNMM15060865 WM25CT........... B62
5698413 ..... DNMM15060865 WP15CT ........... B62
5698414 ..... DNMM15060865 WP25CT ........... B62
5698415 ..... DNMM15060865 WP35CT ........... B62
5698416 ..... DNMM15061265 WM25CT........... B62
5698417 ..... DNMM15061265 WP15CT ........... B62
5698418 ..... DNMM15061665 WP15CT ........... B62
5698419 ..... DNMM15061665 WP25CT ........... B62
5710285 ..... VSM490D025Z02B25XN15 ...........J33
5710286 ..... VSM490D032Z03B32XN15 ...........J33
5710287 ..... VSM490D025Z02A25XN15L170 ...J34
5710288 ..... VSM490D032Z03A32XN15L200 ...J34
5710289 ..... VSM490D040Z04S16XN15 ...........J35
5710520 ..... VSM490D040Z05S16XN15 ...........J35
5710521 ..... VSM490D050Z05S22XN15 ...........J35
5710522 ..... VSM490D050Z06S22XN15 ...........J35
5710523 ..... VSM490D063Z06S22XN15 ...........J35
5710524 ..... VSM490D063Z07S22XN15 ...........J35
5710525 ..... VSM490D080Z07S27XN15 ...........J35
5710526 ..... VSM490D100Z08S32XN15 ...........J35
5710527 ..... XNGU15T608SRMM WP25PM .......J37
5710528 ..... XNGU15T608SRMM WP40PM .......J37
5710529 ..... XNGU15T608SRMM WU35PM .......J37
5825527 ..... D0100300T008 TIALN .................. P37
5825528 ..... D0100400T011 TIALN .................. P37
5825529 ..... D0100500T013 TIALN .................. P37
5825530 ..... D0100600T013 TIALN .................. P37
5825531 ..... D0100800T019 TIALN .................. P37
5825532 ..... D0101000T022 TIALN .................. P37
5825533 ..... D0101200T026 TIALN .................. P37
5825534 ..... D0101400T026 TIALN .................. P37
5825536 ..... D0101600T032 TIALN .................. P37
5825538 ..... D0101800T032 TIALN .................. P37
5825539 ..... D0102000T038 TIALN .................. P37
5825540 ..... D0101200W026 TIALN ................. P37
5825541 ..... D0101400W026 TIALN ................. P37
5825542 ..... D0101600W032 TIALN ................. P37
5825543 ..... D0101800W032 TIALN ................. P37
5825544 ..... D0102000W038 TIALN ................. P37
5825545 ..... 28480400T011 TIALN .................. P38
5825546 ..... 28480500T013 TIALN .................. P38
5825547 ..... 28480600T013 TIALN .................. P38
5825548 ..... 28480800T019 TIALN .................. P38
5825549 ..... 28481000T022 TIALN .................. P38
5825550 ..... 28481200T026 TIALN .................. P38
5825551 ..... 28481400T026 TIALN .................. P38
5825552 ..... 28481600T032 TIALN .................. P38
5825553 ..... 28481800T032 TIALN .................. P38
5825554 ..... 28482000T038 TIALN .................. P38
5825555 ..... 40000200T006 TIALN .................. P39
5825556 ..... 40000300T020 TIALN .................. P39
5825557 ..... 40000400T014 TIALN .................. P39
5825558 ..... 40100400T025 TIALN .................. P39
5825559 ..... 40000500T016 TIALN .................. P39
5825560 ..... 40100500T030 TIALN .................. P39
5825573 ..... 40000600T016 TIALN .................. P39
5825574 ..... 40100600T019 TIALN .................. P39
5825575 ..... 40100600T030 TIALN .................. P39
5825576 ..... 40000800T019 TIALN .................. P39
5825577 ..... 40100800T040 TIALN .................. P39
5825578 ..... 40001000T022 TIALN .................. P39
5825579 ..... 40101000T040 TIALN .................. P39
5825580 ..... 40001200T025 TIALN .................. P39
5825581 ..... 40101200T045 TIALN .................. P39
5825583 ..... 40001400T032 TIALN .................. P39
5825584 ..... 40101400T050 TIALN .................. P39
5825585 ..... 40001600T032 TIALN .................. P39
5825586 ..... 40101600T065 TIALN .................. P39
5825587 ..... 40001800T038 TIALN .................. P39
5825588 ..... 40102000T056 TIALN .................. P39
5825589 ..... D0101200W026 UNCOATED ......... P37
5825590 ..... D0101400W026 UNCOATED ......... P37
5825591 ..... D0101600W032 UNCOATED ......... P37
5825592 ..... D0101800W032 UNCOATED ......... P37
5825593 ..... D0102000W038 UNCOATED ......... P37
Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 71 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRAND O b 28 2015 3 09 PM
Z72 widia.com
Index by Order Number
Order No. Catalogue No. Page(s)
5825594 ..... 28480400T011 UNCOATED .......... P38
5825595 ..... 28480500T013 UNCOATED .......... P38
5825596 ..... 28480600T013 UNCOATED .......... P38
5825597 ..... 28480800T019 UNCOATED .......... P38
5825598 ..... 28481000T022 UNCOATED .......... P38
5825599 ..... 28481200T026 UNCOATED .......... P38
5825600 ..... 28481400T026 UNCOATED .......... P38
5825601 ..... 28481600T032 UNCOATED .......... P38
5825602 ..... 28481800T032 UNCOATED .......... P38
5825603 ..... 28482000T038 UNCOATED .......... P38
5825604 ..... D0100300T008 UNCOATED .......... P37
5825605 ..... D0100400T011 UNCOATED .......... P37
5825606 ..... D0100500T013 UNCOATED .......... P37
5825607 ..... D0100600T013 UNCOATED .......... P37
5825608 ..... D0100800T019 UNCOATED .......... P37
5825609 ..... D0101000T022 UNCOATED .......... P37
5825610 ..... D0101200T026 UNCOATED .......... P37
5825611 ..... D0101400T026 UNCOATED .......... P37
5825612 ..... D0101600T032 UNCOATED .......... P37
5825613 ..... D0101800T032 UNCOATED .......... P37
5825614 ..... D0102000T038 UNCOATED .......... P37
5825894 ..... D0040200T004 TIALN .................. P32
5825895 ..... D0140200T007 TIALN .................. P32
5825896 ..... D0140250T008 TIALN .................. P32
5825897 ..... D0040300T005 TIALN .................. P32
5825898 ..... D0140300T008 TIALN .................. P32
5825899 ..... D0140350T010 TIALN .................. P32
5825900 ..... D0040400T008 TIALN .................. P32
5825931 ..... D0140400T011 TIALN .................. P32
5825932 ..... D0140450T011 TIALN .................. P32
5825933 ..... D0040500T009 TIALN .................. P32
5825934 ..... D0140500T013 TIALN .................. P32
5825935 ..... D0140550T013 TIALN .................. P32
5825936 ..... D0040600T010 TIALN .................. P32
5825937 ..... D0140600T013 TIALN .................. P32
5825938 ..... D0140650T016 TIALN .................. P32
5825939 ..... D0040700T011 TIALN .................. P32
5825940 ..... D0140700T016 TIALN .................. P32
5825941 ..... D0140750T019 TIALN .................. P32
5825942 ..... D0040800T012 TIALN .................. P32
5825943 ..... D0140800T019 TIALN .................. P32
5825944 ..... D0040900T013 TIALN .................. P33
5825945 ..... D0140900T019 TIALN .................. P33
5825946 ..... D0041000T014 TIALN .................. P33
5825947 ..... D0141000T022 TIALN .................. P33
5825948 ..... D0041200T016 TIALN .................. P33
5825949 ..... D0141200T026 TIALN .................. P33
5825950 ..... D0041400T018 TIALN .................. P33
5825951 ..... D0141400T026 TIALN .................. P33
5825952 ..... D0041600T022 TIALN .................. P33
5825953 ..... D0141600T032 TIALN .................. P33
5825954 ..... D0041800T024 TIALN .................. P33
5825955 ..... D0141800T032 TIALN .................. P33
5825956 ..... D0042000T026 TIALN .................. P33
5825957 ..... D0142000T038 TIALN .................. P33
5825958 ..... D0041200W016 TIALN ................. P33
5825959 ..... D0141200W026 TIALN ................. P33
5825960 ..... D0041400W018 TIALN ................. P33
5825961 ..... D0141400W026 TIALN ................. P33
5825962 ..... D0041600W022 TIALN ................. P33
5825963 ..... D0141600W032 TIALN ................. P33
5825964 ..... D0041800W024 TIALN ................. P33
5825965 ..... D0141800W032 TIALN ................. P33
5825966 ..... D0042000W026 TIALN ................. P33
5825967 ..... D0142000W038 TIALN ................. P33
5825968 ..... D0041200W016 UNCOATED ......... P33
5825969 ..... D0141200W026 UNCOATED ......... P33
5825970 ..... D0041400W018 UNCOATED ......... P33
5825971 ..... D0141400W026 UNCOATED ......... P33
5825972 ..... D0041600W022 UNCOATED ......... P33
5825973 ..... D0141600W032 UNCOATED ......... P33
5825974 ..... D0041800W024 UNCOATED ......... P33
5825975 ..... D0141800W032 UNCOATED ......... P33
5825976 ..... D0042000W026 UNCOATED ......... P33
5825977 ..... D0142000W038 UNCOATED ......... P33
5825978 ..... 25280400T011 TIALN .................. P34
5825979 ..... 25280500T013 TIALN .................. P34
5825980 ..... 25280600T013 TIALN .................. P34
5825981 ..... 25280800T019 TIALN .................. P34
5825982 ..... 25281000T022 TIALN .................. P34
5825983 ..... 25281200T026 TIALN .................. P34
5825984 ..... 25281400T026 TIALN .................. P34
5825985 ..... 25281600T032 TIALN .................. P34
5825986 ..... 25281800T032 TIALN .................. P34
5825987 ..... 25282000T038 TIALN .................. P34
5825988 ..... 25281200T026 UNCOATED .......... P34
5825989 ..... 25281400T026 UNCOATED .......... P34
5825990 ..... 25281600T032 UNCOATED .......... P34
5825991 ..... 25281800T032 UNCOATED .......... P34
5825992 ..... 25282000T038 UNCOATED .......... P34
5825993 ..... 25280400T011 UNCOATED .......... P34
5825994 ..... 25280500T013 UNCOATED .......... P34
5825995 ..... 25280600T013 UNCOATED .......... P34
5825996 ..... 25280800T019 UNCOATED .......... P34
5825997 ..... 25281000T022 UNCOATED .......... P34
5826016 ..... 40040100T004 TIALN .................. P35
5826017 ..... 40040150T004 TIALN .................. P35
5826018 ..... 40040200T006 TIALN .................. P35
5826019 ..... 40040250T006 TIALN .................. P35
5826020 ..... 40040300T009 TIALN .................. P35
5826021 ..... 40140300T019 TIALN .................. P35
5826022 ..... 40240300T025 TIALN .................. P35
5826023 ..... 40040350T012 TIALN .................. P35
5826024 ..... 40040400T011 TIALN .................. P35
5826025 ..... 40140400T019 TIALN .................. P35
5826026 ..... 40240400T031 TIALN .................. P35
5826027 ..... 40040450T014 TIALN .................. P35
5826028 ..... 40040500T013 TIALN .................. P35
5826029 ..... 40040500T020 TIALN .................. P35
5826030 ..... 40140500T030 TIALN .................. P35
5826031 ..... 40240500T031 TIALN .................. P35
5826032 ..... 40040600T016 TIALN .................. P35
5826033 ..... 40140600T028 TIALN .................. P35
5826034 ..... 40240600T038 TIALN .................. P35
5826035 ..... 40040700T020 TIALN .................. P35
5826036 ..... 40040800T020 TIALN .................. P36
5826037 ..... 40140800T028 TIALN .................. P36
5826038 ..... 40240800T041 TIALN .................. P36
5826039 ..... 40040900T020 TIALN .................. P36
5826040 ..... 40041000T022 TIALN .................. P36
5826041 ..... 40141000T032 TIALN .................. P36
5826042 ..... 40241000T045 TIALN .................. P36
5826043 ..... 40041200T025 TIALN .................. P36
5826044 ..... 40141200T045 TIALN .................. P36
5826045 ..... 40241200T075 TIALN .................. P36
5826046 ..... 40041400T032 TIALN .................. P36
5826047 ..... 40141400T050 TIALN .................. P36
5826049 ..... 40241400T075 TIALN .................. P36
5826061 ..... 40041600T032 TIALN .................. P36
5826062 ..... 40141600T056 TIALN .................. P36
5826063 ..... 40241600T075 TIALN .................. P36
5826064 ..... 40041800T038 TIALN .................. P36
5826065 ..... 40141800T060 TIALN .................. P36
5826066 ..... 40241800T075 TIALN .................. P36
5826067 ..... 40042000T038 TIALN .................. P36
5826068 ..... 40142000T056 TIALN .................. P36
5826069 ..... 40242000T075 TIALN .................. P36
5826070 ..... 40041200W025 TIALN ................. P36
5826071 ..... 40141200W045 TIALN ................. P36
5826072 ..... 40241200W075 TIALN ................. P36
5826073 ..... 40041400W032 TIALN ................. P36
5826074 ..... 40141400W050 TIALN ................. P36
5826075 ..... 40241400W075 TIALN ................. P36
5826076 ..... 40041600W032 TIALN ................. P36
5826077 ..... 40141600W056 TIALN ................. P36
5826078 ..... 40241600W075 TIALN ................. P36
5826079 ..... 40041800W038 TIALN ................. P36
5826080 ..... 40141800W060 TIALN ................. P36
5826081 ..... 40241800W075 TIALN ................. P36
5826082 ..... 40042000W038 TIALN ................. P36
5826083 ..... 40142000W056 TIALN ................. P36
5826084 ..... 40242000W075 TIALN ................. P36
5826085 ..... 40040100T004 UNCOATED .......... P35
5826086 ..... 40040150T004 UNCOATED .......... P35
5826087 ..... 40040200T006 UNCOATED .......... P35
5826088 ..... 40040250T006 UNCOATED .......... P35
5826089 ..... 40040300T009 UNCOATED .......... P35
5826090 ..... 40140300T019 UNCOATED .......... P35
5826101 ..... 40240300T025 UNCOATED .......... P35
5826102 ..... 40040350T012 UNCOATED .......... P35
5826103 ..... 40040400T011 UNCOATED .......... P35
5826104 ..... 40040450T014 UNCOATED .......... P35
5826105 ..... 40040500T020 UNCOATED .......... P35
5826106 ..... 40040600T016 UNCOATED .......... P35
5826107 ..... 40140600T028 UNCOATED .......... P35
5826108 ..... 40240600T038 UNCOATED .......... P35
5826109 ..... 40040800T020 UNCOATED .......... P36
5826110 ..... 40140800T028 UNCOATED .......... P36
5826111 ..... 40240800T041 UNCOATED .......... P36
5826113 ..... 40041000T022 UNCOATED .......... P36
5826114 ..... 40141000T032 UNCOATED .......... P36
5826115 ..... 40241000T045 UNCOATED .......... P36
5826116 ..... 40041200T025 UNCOATED .......... P36
5826117 ..... 40141200T045 UNCOATED .......... P36
5826118 ..... 40241200T075 UNCOATED .......... P36
5826119 ..... 40041400T032 UNCOATED .......... P36
5826120 ..... 40141400T050 UNCOATED .......... P36
5826121 ..... 40241400T075 UNCOATED .......... P36
5826122 ..... 40041600T032 UNCOATED .......... P36
5826123 ..... 40141600T056 UNCOATED .......... P36
5826124 ..... 40241600T075 UNCOATED .......... P36
5826125 ..... 40041800T038 UNCOATED .......... P36
5826126 ..... 40141800T060 UNCOATED .......... P36
5826127 ..... 40241800T075 UNCOATED .......... P36
5826128 ..... 40042000T038 UNCOATED .......... P36
5826129 ..... 40142000T056 UNCOATED .......... P36
5826130 ..... 40242000T075 UNCOATED .......... P36
5826141 ..... 40041200W025 UNCOATED ......... P36
5826142 ..... 40141200W045 UNCOATED ......... P36
5826143 ..... 40241200W075 UNCOATED ......... P36
5826144 ..... 40041400W032 UNCOATED ......... P36
5826146 ..... 40141400W050 UNCOATED ......... P36
5826147 ..... 40241400W075 UNCOATED ......... P36
5826148 ..... 40041600W032 UNCOATED ......... P36
5826149 ..... 40141600W056 UNCOATED ......... P36
5826150 ..... 40241600W075 UNCOATED ......... P36
5826151 ..... 40041800W038 UNCOATED ......... P36
5826152 ..... 40141800W060 UNCOATED ......... P36
5826153 ..... 40241800W075 UNCOATED ......... P36
5826154 ..... 40042000W038 UNCOATED ......... P36
5826155 ..... 40142000W056 UNCOATED ......... P36
5826156 ..... 40242000W075 UNCOATED ......... P36
5873211 ..... VSM490D025Z02M12XN15 ..........J32
5873212 ..... VSM490D032Z03M16XN15 ..........J32
5873213 ..... VSM490D032Z04M16XN15 ..........J32
5873214 ..... VSM490D035Z04M16XN15 ..........J32
5873215 ..... VSM490D040Z03B32XN15 ...........J33
5873216 ..... VSM490D025Z02A25XN15L100 ...J34
5873217 ..... VSM490D032Z03A32XN15L110 ...J34
5873218 ..... VSM490D032Z04A32XN15L110 ...J34
5873219 ..... VSM490D032Z04A32XN15L200 ...J34
5873221 ..... VSM490D050Z04S22XN15 ...........J35
5873222 ..... VSM490D063Z05S22XN15 ...........J35
5873223 ..... VSM490D080Z05S27XN15 ...........J35
5873224 ..... VSM490D080Z09S27XN15 ...........J35
5873225 ..... VSM490D100Z11S32XN15 ...........J35
5873226 ..... VSM490D125Z09S40XN15 ...........J35
5873227 ..... VSM490D125Z12S40XN15 ...........J35
5873228 ..... VSM490D160Z12S40XN15 ...........J35
5873415 ..... XNPU15T608SRMM WP25PM ........J37
5873416 ..... XNPU15T608SRMM WP40PM ........J37
5873417 ..... XNPU15T608SRMM WU35PM ........J37
5873418 ..... XNPU15T608SRMM WP35CM ........J37
5873419 ..... XNPU15T608SRMM WK15PM ........J37
5873420 ..... XNPU15T608SRMM WK15CM ........J37
5873481 ..... XNGU15T608ERML WP25PM .........J36
5873482 ..... XNGU15T608ERML WP40PM .........J36
5873483 ..... XNGU15T608ERML WU35PM .........J36
5873484 ..... 40020100T004 TIALN .................. P17
5873485 ..... 40020150T004 TIALN .................. P17
5873486 ..... 40020180T004 TIALN .................. P17
5873487 ..... 40020200T006 TIALN .................. P17
5873488 ..... 40020250T006 TIALN .................. P17
5873489 ..... 40020300T009 TIALN .................. P17
5873490 ..... 40020300T019 TIALN .................. P17
5873491 ..... 40120300T025 TIALN .................. P17
5873492 ..... 40020350T012 TIALN .................. P17
5873493 ..... 40020400T012 TIALN .................. P17
5873494 ..... 40020400T019 TIALN .................. P17
5873495 ..... 40120400T031 TIALN .................. P17
5873496 ..... 40020450T014 TIALN .................. P17
5873497 ..... 40020480T014 TIALN .................. P17
5873498 ..... 40020500T014 TIALN .................. P17
5873499 ..... 40020500T020 TIALN .................. P17
5873500 ..... 40120500T031 TIALN .................. P17
5873501 ..... 40020550T014 TIALN .................. P17
5873502 ..... 40020600T016 TIALN .................. P17
5873503 ..... 40020600T028 TIALN .................. P17
5873504 ..... 40120600T038 TIALN .................. P18
5873505 ..... 40020700T020 TIALN .................. P18
5873506 ..... 40020800T020 TIALN .................. P18
5873507 ..... 40020800T028 TIALN .................. P18
5873508 ..... 40120800T041 TIALN .................. P18
5873509 ..... 40020900T020 TIALN .................. P18
5873510 ..... 40021000T022 TIALN .................. P18
5873511 ..... 40021000T032 TIALN .................. P18
5873512 ..... 40121000T045 TIALN .................. P18
5873513 ..... 40021100T025 TIALN .................. P18
5873514 ..... 40021200T025 TIALN .................. P18
5873515 ..... 40021200T045 TIALN .................. P18
5873516 ..... 40121200T075 TIALN .................. P18
5873517 ..... 40021400T032 TIALN .................. P18
5873518 ..... 40021400T050 TIALN .................. P18
5873519 ..... 40121400T075 TIALN .................. P18
Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 72 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRANDO b 28 20153 09PM
Z73
widia.com
Index by Order Number
Order No. Catalogue No. Page(s)
5873520 ..... 40021600T032 TIALN .................. P18
5873531 ..... 40021600T056 TIALN .................. P18
5873532 ..... 40121600T075 TIALN .................. P18
5873533 ..... 40021800T038 TIALN .................. P18
5873534 ..... 40021800T060 TIALN .................. P18
5873535 ..... 40121800T075 TIALN .................. P18
5873536 ..... 40022000T038 TIALN .................. P18
5873537 ..... 40022000T056 TIALN .................. P18
5873538 ..... 40122000T075 TIALN .................. P18
5877330 ..... D0020200T003 TIALN .................. P14
5877501 ..... D0020250T003 TIALN .................. P14
5877502 ..... D0120250T007 TIALN .................. P14
5877503 ..... D0020300T004 TIALN .................. P14
5877504 ..... D0120300T007 TIALN .................. P14
5877505 ..... D0020350T004 TIALN .................. P14
5877506 ..... D0020400T005 TIALN .................. P14
5877507 ..... D0120400T008 TIALN .................. P14
5877509 ..... D0020450T005 TIALN .................. P14
5877510 ..... D0120450T008 TIALN .................. P14
5877511 ..... D0020500T006 TIALN .................. P14
5877512 ..... D0120500T010 TIALN .................. P14
5877513 ..... D0020600T007 TIALN .................. P14
5877514 ..... D0120600T010 TIALN .................. P14
5877515 ..... D0020700T008 TIALN .................. P14
5877516 ..... D0120700T013 TIALN .................. P14
5877517 ..... D0020800T009 TIALN .................. P14
5877518 ..... D0120800T016 TIALN .................. P14
5877520 ..... D0020900T010 TIALN .................. P14
5877521 ..... D0120900T016 TIALN .................. P14
5877522 ..... D0021000T011 TIALN .................. P15
5877523 ..... D0121000T019 TIALN .................. P15
5877524 ..... D0021200T012 TIALN .................. P15
5877525 ..... D0121200T022 TIALN .................. P15
5877526 ..... D0021400T014 TIALN .................. P15
5877527 ..... D0121400T022 TIALN .................. P15
5877529 ..... D0021600T016 TIALN .................. P15
5877530 ..... D0121600T026 TIALN .................. P15
5877531 ..... D0021800T018 TIALN .................. P15
5877532 ..... D0121800T026 TIALN .................. P15
5877533 ..... D0022000T020 TIALN .................. P15
5877534 ..... D0122000T032 TIALN .................. P15
5877535 ..... D0021200W012 TIALN ................. P15
5877537 ..... D0121200W022 TIALN ................. P15
5877538 ..... D0021400W014 TIALN ................. P15
5877539 ..... D0121400W022 TIALN ................. P15
5877540 ..... D0021600W016 TIALN ................. P15
5877551 ..... D0121600W026 TIALN ................. P15
5877552 ..... D0021800W018 TIALN ................. P15
5877553 ..... D0121800W026 TIALN ................. P15
5877554 ..... D0022000W020 TIALN ................. P15
5877555 ..... D0122000W032 TIALN ................. P15
5877556 ..... D0021200W012 UNCOATED ......... P15
5877557 ..... D0121200W022 UNCOATED ......... P15
5877558 ..... D0021400W014 UNCOATED ......... P15
5877559 ..... D0121400W022 UNCOATED ......... P15
5877560 ..... D0021600W016 UNCOATED ......... P15
5877561 ..... D0121600W026 UNCOATED ......... P15
5877563 ..... D0021800W018 UNCOATED ......... P15
5877564 ..... D0121800W026 UNCOATED ......... P15
5877565 ..... D0022000W020 UNCOATED ......... P15
5877566 ..... D0122000W032 UNCOATED ......... P15
5877567 ..... D0020200T003 UNCOATED .......... P14
5877568 ..... D0020250T003 UNCOATED .......... P14
5877569 ..... D0120250T007 UNCOATED .......... P14
5877571 ..... D0020300T004 UNCOATED .......... P14
5877572 ..... D0120300T007 UNCOATED .......... P14
5877573 ..... D0020350T004 UNCOATED .......... P14
5877574 ..... D0020400T005 UNCOATED .......... P14
5877575 ..... D0120400T008 UNCOATED .......... P14
5877576 ..... D0020450T005 UNCOATED .......... P14
5877577 ..... D0120450T008 UNCOATED .......... P14
5877578 ..... D0020500T006 UNCOATED .......... P14
5877579 ..... D0120500T010 UNCOATED .......... P14
5877581 ..... D0020600T007 UNCOATED .......... P14
5877582 ..... D0120600T010 UNCOATED .......... P14
5877583 ..... D0020700T008 UNCOATED .......... P14
5877584 ..... D0120700T013 UNCOATED .......... P14
5877585 ..... D0020800T009 UNCOATED .......... P14
5877586 ..... D0120800T016 UNCOATED .......... P14
5877588 ..... D0020900T010 UNCOATED .......... P14
5877589 ..... D0120900T016 UNCOATED .......... P14
5877590 ..... D0021000T011 UNCOATED .......... P15
5877591 ..... D0121000T019 UNCOATED .......... P15
5877592 ..... D0021200T012 UNCOATED .......... P15
5877593 ..... D0121200T022 UNCOATED .......... P15
5877594 ..... D0021400T014 UNCOATED .......... P15
5877595 ..... D0121400T022 UNCOATED .......... P15
5877596 ..... D0021600T016 UNCOATED .......... P15
5877597 ..... D0121600T026 UNCOATED .......... P15
5877598 ..... D0021800T018 UNCOATED .......... P15
5877599 ..... D0121800T026 UNCOATED .......... P15
5877601 ..... D0022000T020 UNCOATED .......... P15
5877602 ..... D0122000T032 UNCOATED .......... P15
5877603 ..... 28190300T007 TIALN .................. P16
5877604 ..... 28190400T008 TIALN .................. P16
5877605 ..... 28190500T010 TIALN .................. P16
5877606 ..... 28190600T010 TIALN .................. P16
5877607 ..... 28190700T013 TIALN .................. P16
5877608 ..... 28190800T016 TIALN .................. P16
5877609 ..... 28190900T016 TIALN .................. P16
5877610 ..... 28191000T019 TIALN .................. P16
5877611 ..... 28191200T022 TIALN .................. P16
5877612 ..... 28191400T022 TIALN .................. P16
5877613 ..... 28191500T026 TIALN .................. P16
5877614 ..... 28191600T026 TIALN .................. P16
5877615 ..... 28191800T026 TIALN .................. P16
5877616 ..... 28192000T032 TIALN .................. P16
5877617 ..... 28190300T007 UNCOATED .......... P16
5877618 ..... 28190400T008 UNCOATED .......... P16
5877619 ..... 28190500T010 UNCOATED .......... P16
5877620 ..... 28190600T010 UNCOATED .......... P16
5877621 ..... 28190700T013 UNCOATED .......... P16
5877622 ..... 28190800T016 UNCOATED .......... P16
5877623 ..... 28190900T016 UNCOATED .......... P16
5877624 ..... 28191000T019 UNCOATED .......... P16
5877625 ..... 28191200T022 UNCOATED .......... P16
5877626 ..... 28191400T022 UNCOATED .......... P16
5877627 ..... 28191500T026 UNCOATED .......... P16
5877628 ..... 28191600T026 UNCOATED .......... P16
5877629 ..... 28191800T026 UNCOATED .......... P16
5877630 ..... 28192000T032 UNCOATED .......... P16
5880362 ..... D0110200T006 TIALN .................. P19
5880363 ..... D0010300T004 TIALN .................. P19
5880364 ..... D0110300T007 TIALN .................. P19
5880365 ..... D0010400T005 TIALN .................. P19
5880366 ..... D0110400T008 TIALN .................. P19
5880367 ..... D0110500T010 TIALN .................. P19
5880368 ..... D0110600T010 TIALN .................. P19
5880369 ..... D0110700T013 TIALN .................. P19
5880370 ..... D0110800T016 TIALN .................. P19
5880381 ..... D0111000T019 TIALN .................. P19
5880382 ..... D0111200T022 TIALN .................. P19
5880383 ..... D0111400T022 TIALN .................. P19
5880384 ..... D0111600T026 TIALN .................. P19
5880385 ..... D0012000T020 TIALN .................. P19
5880386 ..... D0112000T032 TIALN .................. P19
5880387 ..... 40010100T004 TIALN .................. P21
5880388 ..... 40010150T005 TIALN .................. P21
5880389 ..... 40010200T006 TIALN .................. P21
5880390 ..... 40010250T007 TIALN .................. P21
5880391 ..... 40010300T009 TIALN .................. P21
5880392 ..... 40010350T012 TIALN .................. P21
5880393 ..... 40010400T012 TIALN .................. P21
5880395 ..... 40110400T019 TIALN .................. P21
5880396 ..... 40210400T031 TIALN .................. P21
5880397 ..... 40210500T014 TIALN .................. P21
5880398 ..... 40010600T020 TIALN .................. P21
5880399 ..... 40110600T028 TIALN .................. P21
5880400 ..... 40210600T038 TIALN .................. P21
5880401 ..... 40010800T020 TIALN .................. P21
5880402 ..... 40110800T028 TIALN .................. P21
5880403 ..... 40210800T040 TIALN .................. P21
5880404 ..... 40011000T022 TIALN .................. P21
5880405 ..... 40111000T032 TIALN .................. P21
5880406 ..... 40211000T045 TIALN .................. P21
5880407 ..... 40011200T025 TIALN .................. P22
5880408 ..... 40111200T045 TIALN .................. P22
5880409 ..... 40211200T075 TIALN .................. P22
5880410 ..... 40011400T032 TIALN .................. P22
5880411 ..... 40011600T032 TIALN .................. P22
5880412 ..... 40012000T038 TIALN .................. P22
5880413 ..... 40112000T075 TIALN .................. P22
5880425 ..... 40010100T004 UNCOATED .......... P21
5880426 ..... 40010150T005 UNCOATED .......... P21
5880427 ..... 40010200T006 UNCOATED .......... P21
5880428 ..... 40010250T007 UNCOATED .......... P21
5880429 ..... 40010300T009 UNCOATED .......... P21
5880430 ..... 40010400T012 UNCOATED .......... P21
5880431 ..... 40110400T019 UNCOATED .......... P21
5880432 ..... 40210400T031 UNCOATED .......... P21
5880433 ..... 40010500T014 UNCOATED .......... P21
5880435 ..... 40010600T020 UNCOATED .......... P21
5880436 ..... 40110600T028 UNCOATED .......... P21
5880437 ..... 40210600T038 UNCOATED .......... P21
5880438 ..... 40010800T020 UNCOATED .......... P21
5880439 ..... 40110800T028 UNCOATED .......... P21
5880440 ..... 40210800T040 UNCOATED .......... P21
5880441 ..... 40011000T022 UNCOATED .......... P21
5880442 ..... 40111000T032 UNCOATED .......... P21
5880443 ..... 40211000T045 UNCOATED .......... P21
5880444 ..... 40011200T025 UNCOATED .......... P22
5880445 ..... 40111200T045 UNCOATED .......... P22
5880446 ..... 40211200T075 UNCOATED .......... P22
5880447 ..... 40011400T032 UNCOATED .......... P22
5880448 ..... 40011600T032 UNCOATED .......... P22
5880449 ..... 40012000T038 UNCOATED .......... P22
5880450 ..... 40112000T075 UNCOATED .......... P22
5880451 ..... 28380200T007 TIALN .................. P20
5880452 ..... 28380300T007 TIALN .................. P20
5880453 ..... 28380400T008 TIALN .................. P20
5880454 ..... 28380500T010 TIALN .................. P20
5880455 ..... 28380600T010 TIALN .................. P20
5880456 ..... 28380800T016 TIALN .................. P20
5880457 ..... 28381000T019 TIALN .................. P20
5880458 ..... 28381200T022 TIALN .................. P20
5880459 ..... 28381400T022 TIALN .................. P20
5880460 ..... 28381600T026 TIALN .................. P20
5880461 ..... 28382000T032 TIALN .................. P20
5880462 ..... 28380300T007 UNCOATED .......... P20
5880463 ..... 28380400T008 UNCOATED .......... P20
5880464 ..... 28380500T010 UNCOATED .......... P20
5880465 ..... 28380600T010 UNCOATED .......... P20
5880466 ..... 28380800T016 UNCOATED .......... P20
5880467 ..... 28381000T019 UNCOATED .......... P20
5880468 ..... 28381200T022 UNCOATED .......... P20
5880469 ..... 28381400T022 UNCOATED .......... P20
5880470 ..... 28381600T026 UNCOATED .......... P20
5880471 ..... 28382000T032 UNCOATED .......... P20
5883097 ..... XNPU15T608ERML WP25PM .........J37
5883098 ..... XNPU15T608ERML WP40PM .........J37
5883099 ..... XNPU15T608ERML WU35PM .........J37
5883447 ..... XNPU15T616SRMM WP25PM ........J37
5883448 ..... XNPU15T616SRMM WP40PM ........J37
5883449 ..... XNPU15T616SRMM WU35PM ........J37
5883450 ..... XNPU15T616SRMM WP35CM ........J37
5883521 ..... XNPU15T616SRMM WK15PM ........J37
5883522 ..... XNPU15T616SRMM WK15CM ........J37
5885722 ..... CCGW060204FST WDN00U ........ B197
5885723 ..... CCGW09T304FST WDN00U ........ B197
5885724 ..... CCGW09T308FST WDN00U ........ B197
5885725 ..... CNGA120404FST WDN00U ......... B200
5885726 ..... CNGA120408FST WDN00U ......... B200
5885758 ..... CPGW060204FWST WDN00U ..... B204
5885759 ..... CPGW09T308FWST WDN00U ..... B204
5885760 ..... CPGW120408FWST WDN00U ..... B204
5885774 ..... DNGA150404FST WDN00U ......... B207
5885775 ..... DNGA150408FST WDN00U ......... B207
5885776 ..... DNMS150404FST WDN00U ........ B209
5885777 ..... DNMS150408FST WDN00U ........ B209
5885778 ..... DPGW070202FST WDN00U ........ B210
5885779 ..... DPGW070204FST WDN00U ........ B210
5885780 ..... DPGW11T304FST WDN00U ........ B210
5885791 ..... DPGW11T304FWST WDN00U ..... B210
5885792 ..... DPGW070204FWST WDN00U ..... B210
5890728 ..... XNPU15T612SRMM WP25PM ........J37
5890729 ..... XNPU15T612SRMM WP40PM ........J37
5890730 ..... XNPU15T612SRMM WU35PM ........J37
5890761 ..... XNPU15T612SRMM WP35CM ........J37
5890762 ..... XNPU15T612SRMM WK15PM ........J37
5890763 ..... XNPU15T612SRMM WK15CM ........J37
5890821 ..... XNGU15T604ERML WP25PM .........J36
5890822 ..... XNGU15T604ERML WP40PM .........J36
5890823 ..... XNGU15T604ERML WU35PM .........J36
5895291 ..... HNGJ0704ANENLD WP25PM ......... H8,
H16, H21
5895292 ..... HNGJ0704ANENLD WP35CM ......... H8,
H16, H21
5895293 ..... HNPJ0704ANSNGD WP25PM......... H9,
H17, H22
5895294 ..... HNPJ0704ANSNGD WP35CM ........ H9,
H17, H22
5895295 ..... HNPJ0704ANSNHD WP25PM ......... H9,
H17, H22
5895296 ..... HNPJ0704ANSNHD WP35CM ........ H9,
H17, H22
5895297 ..... HNPJ070432ANSNHD WP40PM..... H9,
H17, H22
5895298 ..... XNGJ0704ANENLD3W WP25PM ... H17
5895299 ..... XNGJ0704ANENLD3W WP40PM ... H17
5895346 ..... HNGJ0905ANENLD WP25PM ....... H33,
H39
5895347 ..... HNGJ0905ANENLD WP35CM ....... H33,
H39
Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 73 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRAND O b 28 2015 3 09 PM
Z74 widia.com
Index by Order Number
Order No. Catalogue No. Page(s)
5895348 ..... HNGJ0905ANENLD WP40PM ....... H33,
H39
5895349 ..... HNGJ0905ANSNGD WP35CM ...... H28,
H34, H40
5895350 ..... HNGJ0905ANSNGD WP40PM ...... H28,
H34, H40
5895371 ..... HNGJ0905ANSNHD WP25PM ...... H28,
H34, H40
5895372 ..... HNGJ0905ANSNHD WP35CM ...... H28,
H34, H40
5895373 ..... HNGJ0905ANSNHD WP40PM ...... H28,
H34, H40
5895374 ..... HNPJ0905ANSNGD WP25PM....... H27,
H34, H40
5895375 ..... HNPJ0905ANSNGD WP35CM ...... H27,
H34, H40
5895376 ..... HNPJ0905ANSNHD WP25PM ....... H28,
H34, H40
5895377 ..... HNPJ0905ANSNHD WP35CM ...... H28,
H34, H40
5895378 ..... HNPJ090543ANSNHD WP25PM... H28,
H34, H40
5895379 ..... HNPJ090543ANSNHD WP35CM... H28,
H34, H40
5895380 ..... HNPJ090543ANSNHD WP40PM... H28,
H34, H40
5895381 ..... XNGJ0905ANSNGD3W WP25PM
.......................................................................... H35
5895382 ..... XNGJ0905ANSNGD3W WP40PM
.......................................................................... H35
5895536 ..... SNMT1205AZR31 WP25PM .......... H55
5895537 ..... SNMT1205AZR31 WP35CM.......... H55
5895538 ..... SNKT1505AZR31 WP25PM ........... H59
5895539 ..... SNKT1505AZR31 WP35CM .......... H59
5895540 ..... SNKT1505AZR31 WP40PM ........... H59
5895782 ..... HPGT06T3DZENGD WP25PM ........ H47
5895783 ..... HPGT06T3DZENGD WP40PM ........ H47
5895784 ..... HPGT06T3DZERLD WP25PM......... H46
5895785 ..... HPGT06T3DZERLD WP40PM......... H46
5895786 ..... HPGT06T3DZERGD3W WP25PM ... H47
5895787 ..... HPGT06T3DZERGD3W WP40PM ... H47
5895788 ..... HPPT06T3DZENGD WP25PM ........ H47
5895789 ..... HPPT06T3DZENGD WP40PM ........ H47
5895790 ..... HPPT06T3DZENGD WP35CM ........ H47
5901354 ..... XDPT110424PDSRMM WP40PM ...J10
5901355 ..... XDPT110424PDSRMM WP25PM ...J10
5903644 ..... 123506599 WP40PM ....................L19
5903645 ..... 123506600 WP40PM ....................L20
5903646 ..... 123506601 WP40PM ....................L19
5903647 ..... 123506602 WP40PM ....................L20
5903648 ..... 123506599 WK15CM ....................L19
5903649 ..... 123506600 WK15CM ....................L20
5903650 ..... 123506601 WK15CM ....................L19
5903671 ..... 123506602 WK15CM ....................L20
5903672 ..... 123506599 WP35CM ....................L19
5903673 ..... 123506600 WP35CM ....................L20
5903674 ..... 123506601 WP35CM ....................L19
5903675 ..... 123506602 WP35CM ....................L20
5903676 ..... CPNT060204T WP35CM ..................L5
5903677 ..... CPNT080308T WP35CM ..................L5
5903678 ..... CPNT09T308T WP35CM ..................L6
5903679 ..... CPNT120408T WP35CM ..................L6
5903680 ..... CPNT060204T WK15CM ..................L5
5903701 ..... CPNT080308T WK15CM ..................L5
5903702 ..... CPNT09T308T WK15CM ..................L6
5903703 ..... CPNT120408T WK15CM ..................L6
5903704 ..... MDHX09T308 WP40PM .................L26
5903705 ..... MDHW120408 WP40PM ................L29
5903706 ..... MDHX09T308 WK15CM .................L26
5903707 ..... MDHW120408 WK15CM ...............L29
5903708 ..... MDHX09T308 WP35CM .................L26
5903709 ..... MDHW120408 WP35CM ...............L29
5903710 ..... MDHX09T308 WU35PM .................L26
5903721 ..... MDHW120408 WU35PM................L29
5903722 ..... MDHX09T308 WP25PM .................L26
5903723 ..... MDHW120408 WP25PM ................L29
5908742 ..... CNMG120404MS WS10PT ........... B40
5908743 ..... CNMG120404MS WS25PT ........... B40
5908744 ..... CNMG120404MS WU10HT ........... B40
5908745 ..... CNMG120408MS WS10PT ........... B40
5908746 ..... CNMG120408MS WS25PT ........... B40
5908747 ..... CNMG120408MS WU10HT ........... B40
5908748 ..... CNMG120412MS WS10PT ........... B40
5908749 ..... CNMG120412MS WS25PT ........... B40
5908750 ..... CNMG120412MS WU10HT ........... B40
5908751 ..... CNMG120416MS WS10PT ........... B40
5908752 ..... CNMG120416MS WS25PT ........... B40
5908753 ..... CNMG120416MS WU10HT ........... B40
5908754 ..... CNMG160608MS WS10PT ........... B40
5908755 ..... CNMG160608MS WS25PT ........... B40
5908756 ..... CNMG160608MS WU10HT ........... B40
5908757 ..... CNMG160612MS WS10PT ........... B40
5908758 ..... CNMG160612MS WS25PT ........... B40
5908759 ..... CNMG160612MS WU10HT ........... B40
5908760 ..... CNMG190608MS WS10PT ........... B40
5908761 ..... CNMG190608MS WS25PT ........... B40
5908762 ..... CNMG190608MS WU10HT ........... B40
5908763 ..... CNMG190612MS WS10PT ........... B40
5908764 ..... CNMG190612MS WS25PT ........... B40
5908765 ..... CNMG190612MS WU10HT ........... B40
5908766 ..... CNMG190616MS WS10PT ........... B40
5908767 ..... CNMG190616MS WS25PT ........... B40
5908768 ..... CNMG190616MS WU10HT ........... B40
5908769 ..... DNMG110408MS WS10PT ........... B58
5908770 ..... DNMG110408MS WS25PT ........... B58
5908781 ..... DNMG110408MS WU10HT ........... B58
5908782 ..... DNMG150404MS WS10PT ........... B58
5908783 ..... DNMG150404MS WS25PT ........... B58
5908784 ..... DNMG150404MS WU10HT ........... B58
5908785 ..... DNMG150408MS WS10PT ........... B58
5908787 ..... DNMG150408MS WS25PT ........... B58
5908788 ..... DNMG150408MS WU10HT ........... B58
5908789 ..... DNMG150412MS WS10PT ........... B58
5908790 ..... DNMG150412MS WS25PT ........... B58
5908791 ..... DNMG150412MS WU10HT ........... B58
5908792 ..... DNMG150604MS WS10PT ........... B58
5908793 ..... DNMG150604MS WS25PT ........... B58
5908794 ..... DNMG150604MS WU10HT ........... B58
5908795 ..... DNMG150608MS WS10PT ........... B58
5908796 ..... DNMG150608MS WS25PT ........... B58
5908797 ..... DNMG150608MS WU10HT ........... B58
5908798 ..... DNMG150612MS WS10PT ........... B58
5908799 ..... DNMG150612MS WS25PT ........... B58
5908800 ..... DNMG150612MS WU10HT ........... B58
5908847 ..... SNMG120408MS WS10PT ............ B73
5908848 ..... SNMG120408MS WS25PT ............ B73
5908849 ..... SNMG120408MS WU10HT ........... B73
5908850 ..... SNMG120412MS WS10PT ............ B73
5908921 ..... SNMG120412MS WS25PT ............ B73
5908922 ..... SNMG120412MS WU10HT ........... B73
5908923 ..... SNMG150612MS WS25PT ............ B73
5908924 ..... SNMG150612MS WU10HT ........... B73
5908925 ..... SNMG190612MS WS10PT ............ B73
5908926 ..... SNMG190612MS WS25PT ............ B73
5908927 ..... TNMG160404MS WS10PT ............ B86
5908928 ..... TNMG160404MS WS25PT ............ B86
5908929 ..... TNMG160404MS WU10HT............ B86
5908930 ..... TNMG160408MS WS10PT ............ B86
5908931 ..... TNMG160408MS WS25PT ............ B86
5908932 ..... TNMG160408MS WU10HT............ B86
5908933 ..... TNMG220404MS WS10PT ............ B86
5908934 ..... TNMG220404MS WS25PT ............ B86
5908935 ..... TNMG220404MS WU10HT............ B86
5908936 ..... TNMG220408MS WS10PT ............ B86
5908937 ..... TNMG220408MS WS25PT ............ B86
5908938 ..... TNMG220408MS WU10HT............ B86
5908939 ..... TNMG220412MS WS10PT ............ B86
5908940 ..... TNMG220412MS WS25PT ............ B86
5908941 ..... TNMG220412MS WU10HT............ B86
5908942 ..... TNMG270608MS WS25PT ............ B86
5908943 ..... TNMG270608MS WU10HT............ B86
5908944 ..... VNMG160404MS WS10PT ............ B98
5908945 ..... VNMG160404MS WS25PT ............ B98
5908946 ..... VNMG160404MS WU10HT ........... B98
5908947 ..... VNMG160408MS WS10PT ............ B98
5908948 ..... VNMG160408MS WS25PT ............ B98
5908949 ..... VNMG160408MS WU10HT ........... B98
5908950 ..... VNMG220404MS WS10PT ............ B98
5908961 ..... VNMG220404MS WS25PT ............ B98
5908962 ..... VNMG220404MS WU10HT ........... B98
5908963 ..... VNMG220408MS WS10PT ............ B98
5908964 ..... VNMG220408MS WS25PT ............ B98
5908965 ..... VNMG220408MS WU10HT ........... B98
5908966 ..... WNMG060408MS WS10PT......... B102
5908967 ..... WNMG060408MS WS25PT......... B102
5908968 ..... WNMG060408MS WU10HT ........ B102
5908969 ..... WNMG080404MS WS10PT......... B102
5908970 ..... WNMG080404MS WS25PT......... B102
5908971 ..... WNMG080404MS WU10HT ........ B102
5908972 ..... WNMG080408MS WS10PT......... B102
5908973 ..... WNMG080408MS WS25PT......... B102
5908974 ..... WNMG080408MS WU10HT ........ B102
5910033 ..... HNEC0905ANSN WK25YM ............ H35
5933940 ..... XDCT110404PDFRALP WN10HM ...J11
5936171 ..... XDCT110408PDFRALP WN10HM ...J11
5949204 ..... XNGU15T604SRMM WP25PM .......J37
5949205 ..... XNGU15T604SRMM WP40PM .......J37
5949206 ..... XNGU15T604SRMM WU35PM .......J37
5966234 ..... VSM490KITCD25Z02WP40PM .......J39
5966235 ..... VSM490KITCD32Z03WP40PM .......J39
5966236 ..... VSM490KITSD40Z04WP40PM .......J39
5966237 ..... VSM490KITSD50Z05WP40PM .......J39
5966238 ..... VSM490KITSD50Z06WP40PM .......J39
5966239 ..... VSM490KITSD63Z06WP40PM .......J39
5966240 ..... VSM490KITSD80Z07WP40PM .......J39
5966251 ..... VSM490KITSD100Z08WP40PM .....J39
5966252 ..... VSM490KITCD25Z02WU35PM .......J40
5966253 ..... VSM490KITCD32Z03WU35PM .......J40
5966255 ..... VSM490KITSD40Z04WU35PM .......J40
5966256 ..... VSM490KITSD50Z05WU35PM .......J40
5966257 ..... VSM490KITSD50Z06WU35PM .......J40
5966258 ..... VSM490KITSD63Z06WU35PM .......J40
5966259 ..... VSM490KITSD80Z07WU35PM .......J40
5966260 ..... VSM490KITCD25Z02WK15PM .......J40
5966261 ..... VSM490KITCD32Z03WK15PM .......J40
5966262 ..... VSM490KITSD40Z04WK15PM .......J40
5966263 ..... VSM490KITSD50Z05WK15PM .......J40
5966264 ..... VSM490KITSD50Z06WK15PM .......J40
5966265 ..... VSM490KITSD63Z07WK15PM .......J40
5966266 ..... VSM490KITSD80Z09WK15PM .......J40
5966267 ..... VSM490KITSD100Z11WK15PM .....J40
5978039 ..... 77NE10004T WS15PE .................. O44
5978040 ..... 77NE10024T WS15PE .................. O44
5978092 ..... 771E10004T WS15PE .................. O45
5978093 ..... 771E10024T WS15PE .................. O45
5978094 ..... 772E10004T WS15PE .................. O45
5978095 ..... 772E10024T WS15PE .................. O45
5978096 ..... 77NE12005T WS15PE .................. O44
5978097 ..... 77NE12025T WS15PE .................. O44
5978098 ..... 771E12005T WS15PE .................. O45
5978099 ..... 771E12025T WS15PE .................. O45
5978100 ..... 772E12005T WS15PE .................. O45
5978101 ..... 772E12025T WS15PE .................. O45
5978102 ..... 772E12005V WS15PE .................. O45
5978103 ..... 772E12025V WS15PE .................. O45
5978104 ..... 77NE16006T WS15PE .................. O44
5978105 ..... 77NE16026T WS15PE .................. O44
5978106 ..... 771E16006T WS15PE .................. O45
5978107 ..... 771E16026T WS15PE .................. O45
5978108 ..... 772E16006T WS15PE .................. O45
5978109 ..... 772E16026T WS15PE .................. O45
5978110 ..... 772E16006V WS15PE .................. O45
5978111 ..... 772E16026V WS15PE .................. O45
5978112 ..... 77NE20007T WS15PE .................. O44
5978113 ..... 77NE20027T WS15PE .................. O44
5978114 ..... 771E20007T WS15PE .................. O45
5978115 ..... 771E20027T WS15PE .................. O45
5978116 ..... 772E20007T WS15PE .................. O45
5978117 ..... 772E20027T WS15PE .................. O45
5978118 ..... 772E20007V WS15PE .................. O45
5978119 ..... 772E20027V WS15PE .................. O45
5980398 ..... XDPT110420PDSRMM WP40PM ...J10
5980399 ..... XDPT110420PDSRMM WP25PM ...J10
5980400 ..... XDPT110420PDSRMM WP35CM ...J10
5983390 ..... SXHX060204R20 WP20PH ........... U17
5983701 ..... SXHX060208R20 WP20PH ........... U17
5983702 ..... SXHX070304R20 WP20PH ........... U17
5983703 ..... SXHX070308R20 WP20PH ........... U17
5983704 ..... SXHX090304R20 WP20PH ........... U17
5983705 ..... SXHX090308R20 WP20PH ........... U17
5983706 ..... VXGX10030234 WP20PH .............. U17
5987689 ..... XDPT170404PESRMM WP40PM ....J27
5987690 ..... XDPT170404PESRMM WU35PM ....J27
5987946 ..... XDPT170408PESRMM WP40PM ....J27
5987947 ..... XDPT170408PESRMM WP35CM ....J27
5987948 ..... XDPT170408PESRMM WK15CM ....J27
5987949 ..... XDPT170408PESRMM WP25PM ....J27
5987950 ..... XDPT170408PESRMM WU35PM ....J27
5988055 ..... VSM17D025Z02A25XD17L110 .....J22
5988056 ..... VSM17D025Z02A25XD17L170 .....J22
5988057 ..... VSM17D032Z03A32XD17L120 .....J22
5988058 ..... VSM17D032Z03A32XD17L210 .....J23
5988059 ..... VSM17D040Z04A32XD17L130 .....J22
5988060 ..... VSM17D040Z04A32XD17L250 .....J23
5988091 ..... VSM17D025Z02M12XD17.............J20
5988092 ..... VSM17D032Z03M16XD17.............J20
5988093 ..... VSM17D040Z04M16XD17.............J20
5988094 ..... VSM17D040Z04S16XD17 .............J24
5988095 ..... VSM17D050Z04S22XD17 .............J24
5988096 ..... VSM17D050Z05S22XD17 .............J24
5988097 ..... VSM17D063Z05S22XD17 .............J24
5988098 ..... VSM17D080Z06S27XD17 .............J24
5988099 ..... VSM17D100Z08S32XD17 .............J24
5988100 ..... VSM17D125Z09S40XD17 .............J24
Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s) Order No. Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 74 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRANDO b 28 20153 09PM
Z75
widia.com
Index by Order Number
Order No. Catalogue No. Page(s)
5988101 ..... VSM17D160Z12S40XD17 .............J24
5988102 ..... VSM17D025Z02B25XD17 .............J21
5988103 ..... VSM17D032Z03B32XD17 .............J21
5988104 ..... VSM17D040Z04B40XD17 .............J21
5988107 ..... VSM17D032Z02A32XD17L120 .....J22
5988108 ..... VSM17D032Z02A32XD17L210 .....J23
5988109 ..... VSM17D040Z03A32XD17L130 .....J22
5988110 ..... VSM17D040Z03A32XD17L250 .....J23
5988131 ..... VSM17D40Z03M016XD17.............J20
5988132 ..... VSM17D32Z02M016XD17.............J20
5988133 ..... VSM17D080Z07S27XD17 .............J24
5988134 ..... VSM17D050Z06S22XD17 .............J24
5988135 ..... VSM17D063Z06S22XD17 .............J24
5988136 ..... VSM17D032Z02B32XD17 .............J21
5988137 ..... VSM17D040Z03B40XD17 .............J21
5988138 ..... XDPT170412PESRMM WK15CM ....J27
5988139 ..... XDPT170412PESRMM WP40PM ....J27
5988140 ..... XDPT170412PESRMM WP35CM ....J27
5988151 ..... XDPT170412PESRMM WP25PM ....J27
5988152 ..... XDPT170412PESRMM WU35PM ....J27
5988153 ..... XDPT170416PESRMM WK15CM ....J27
5988154 ..... XDPT170416PESRMM WP40PM ....J27
5988155 ..... XDPT170416PESRMM WP25PM ....J27
5988156 ..... XDPT170416PESRMM WP35CM ....J27
5988158 ..... XDPT170420PESRMM WP25PM ....J27
5988159 ..... XDPT170420PESRMM WP40PM ....J27
5988160 ..... XDPT170420PESRMM WP35CM ....J27
5988202 ..... XDPT170424PESRMM WP40PM ....J27
5988203 ..... XDPT170424PESRMM WP25PM ....J27
5988204 ..... XDPT170432PESRMM WP35CM ....J27
5988205 ..... XDPT170432PESRMM WP40PM ....J27
5988206 ..... XDPT170432PESRMM WP25PM ....J27
5988969 ..... XDPT170440PESRMM WP40PM ....J27
5988970 ..... XDPT170440PESRMM WP25PM ....J27
5988981 ..... XDCT170408PEERML WP40PM .....J25
5988982 ..... XDCT170408PEERML WP35CM .....J25
5988983 ..... XDCT170408PEERML WP25PM .....J25
5988986 ..... XDCT170412PEERML WP40PM .....J25
5988987 ..... XDCT170412PEERML WP35CM .....J25
5988988 ..... XDCT170412PEERML WP25PM .....J25
5989010 ..... XDCT170404PEERML WP25PM .....J25
5989052 ..... XDPT170408PESRMH WP40PM .....J27
5989053 ..... XDPT170408PESRMH WK15CM ....J27
5989054 ..... XDPT170408PESRMH WP35CM ....J27
5991815 ..... XDPT170412PESRMH WP40PM .....J27
5991816 ..... XDPT170412PESRMH WP35CM ....J27
5991817 ..... XDPT170412PESRMH WK15CM ....J27
6001238 ..... XDCT170440PEFRALP WN25PM ....J26
6001239 ..... XDCT170440PEERML WP25PM .....J25
6001240 ..... XDCT170432PEFRALP WN25PM ....J26
6001251 ..... XDCT170432PEERML WP25PM .....J25
6001252 ..... XDCT170424PEFRALP WN25PM ....J26
6001253 ..... XDCT170424PEERML WP25PM .....J25
6001254 ..... XDCT170420PEFRALP WN25PM ....J26
6001255 ..... XDCT170420PEERML WP25PM .....J25
6001256 ..... XDCT170416PEFRALP WN25PM ....J26
6001257 ..... XDCT170416PEERML WP25PM .....J25
6001537 ..... XDCT170412PEFRALP WN25PM ....J26
6003570 ..... XNGU15T608SRMH WP25PM ........J37
6003721 ..... XNGU15T608SRMH WP40PM ........J37
6003722 ..... XNGU15T608SRMH WU35PM ........J37
6003723 ..... XNGU15T608SRMH WP35CM ........J37
6003724 ..... XNGU15T608SRMH WK15PM ........J37
6003725 ..... XNGU15T608SRMH WK15CM ........J37
6007220 ..... XDCT170404PEFRALP WN25PM ....J26
6007341 ..... XDCT170404PEFRALP WN10HM ...J26
6007342 ..... XDCT170412PEFRALP WN10HM ...J26
6007344 ..... XDCT170408PEFRALP WN25PM ....J26
6007345 ..... XDCT170408PEFRALP WN10HM ...J26
6018004 ..... CCGW09T308S01015MT WBH30P
........................................................................ B198
6018006 CNGA120404S01025MT WBH30P
........................................................................ B201
6018008 ..... CNGA120408S01025MT WBH30P
........................................................................ B201
6018009 ..... CNGA120412S01020MT WBH30P
........................................................................ B201
6018010 ..... CNGA120412S01025MT WBH30P
........................................................................ B201
6018081 ..... CPGW060202S01015C WBH30P
........................................................................ B203
6018082 ..... CPGW060204S01015C WBH30P
........................................................................ B203
6018084 ..... CPGW09T304S01015MT WBH30P
........................................................................ B205
6018085 ..... CPGW09T308S01015MT WBH30P
........................................................................ B205
6018090 ..... DNGA150404S01025MT WBH30P
........................................................................ B208
6018092 ..... TPGW110204S01015C WBH30P
........................................................................ B215
6018093 ..... TPGW110208S01015C WBH30P
........................................................................ B215
6018094 ..... VBGW160404S01015MT WBH30P
........................................................................ B216
6018095 ..... VBGW160408S01015MT WBH30P
........................................................................ B216
6018096 ..... VNGA160404S01025MT WBH30P
........................................................................ B217
6018097 ..... VNGA160408S01025MT WBH30P
........................................................................ B217
6023126 ..... VDS403A01000 WU25PD ..............T22
6023127 ..... VDS403A01016 WU25PD ..............T22
6023128 ..... VDS403A01067 WU25PD ..............T22
6023129 ..... VDS403A01100 WU25PD ..............T22
6023130 ..... VDS403A01181 WU25PD ..............T22
6023131 ..... VDS403A01191 WU25PD ..............T22
6023132 ..... VDS403A01200 WU25PD ..............T22
6023133 ..... VDS403A01300 WU25PD ..............T22
6023134 ..... VDS403A01321 WU25PD ..............T22
6023135 ..... VDS403A01397 WU25PD ..............T22
6023136 ..... VDS403A01400 WU25PD ..............T22
6030376 ..... XNGU15T616SRMH WP25PM ........J37
6030377 ..... XNGU15T616SRMH WP35CM ........J37
6030378 ..... XNGU15T616SRMH WK15PM ........J37
6030380 ..... XNGU15T616SRMH WK15CM ........J37
Order No. Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 75 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRAND O b 28 2015 3 09 PM
Z76 widia.com
Index by Catalogue Number
Index
Catalogue No. Page(s)
125.025 .........................J35, M12, M85, M91, M96
125.230 ................... J8, J35, M12, M85, M91, M96
125.825 ......................................................J35, M6
129.025 ..........................................M55, M62, M67
129.512 ............................................................M67
170.004 ............................................................ C34
170.023 .............................................................L18
170.025 ................ J20–24, L18, M20–23, M28–31
170.026 ............................................................M36
170.028 ...........................................................J4–8
191.405 ..............C97–101, C106–110, C112–113,
C118–121, C123–129
191.406 ........C92–94, C97–109, C112, C119–122,
C124, C126–129
191.407 ...................... C92–105, C108–109, C112,
C120, C124
191.725 ...................................................... J20–24
191.848 ..................................................... M20–23
192.432 ........................... J4–8, V10, V13, V16, V19
192.932 ............................................................M36
193.281 ..................................... V10, V13, V16, V19
193.332 ..................................... V10, V13, V16, V19
193.338 ..................................................... M59–62
193.341 ..................................................... M46–48
193.342 ......................................M52–55, M59–62
193.343 ............................................ M36, M66–67
193.364 ..................................................... M42–43
193.383 ............................................................M67
193.492 ..................................................... M28–31
420.200 ....................................................J35, M67
470.232 ............................................................M67
470.233 .............................................................J35
511.018 ......................................C22, C26–30, C60
511.022 ..........................................C60, C104–105
511.023 ...... C20–22, C25–30, C60–61, C104–105
511.024 ......................................................C23–24
511.025 .............C20–22, C25–27, C60, C104–105
511.028 ............................................................ C29
511.030 ............................................................ C61
511.033 ....................................... C20–22, C25–27
511.038 ......................................................C25–27
511.060 ............................................................ C23
512.013 ..............................................C28–29, C60
512.023 ..............................................C28–29, C60
512.025 ............................................C25–27, C105
512.031 ............................................................ C29
512.053 ......................................................C26–27
512.060 ............................................................ C23
512.063 ............................................C25–27, C105
512.083 ......................................................C25–27
512.092 ......................................................C25–27
512.100 ............................................................ C34
512.101 ............................................................ C34
512.111 ............................................................ C22
512.112 ................................... C20–22, C60, C104
512.117 ................................... C20–22, C60, C104
512.123 ......................................................C20–22
512.134 ............................................................ C30
512.135 .................................................... C30, C61
512.153 ......................................................C23–24
513.018 ..............................................C28–30, C60
513.019 ..............................................C22, C26–27
513.020 ............................................................ C34
513.023 .....................C20–30, C60–61, C104–105
513.025 .... C20–22, C25–27, C29, C60, C104–105
513.033 ....................................... C20–22, C25–27
513.038 ......................................................C25–27
513.060 ............................................................ C23
513.123 ............................................................ C34
514.018 ............................................................ C22
514.112 ............................................................ C61
514.118 ......................................C23, C26–30, C60
514.122 ..........................................C60, C104–105
514.123 ...... C20–22, C25–30, C60–61, C104–105
514.125 .............C20–22, C25–27, C60, C104–105
514.128 ..............................................C23–24, C29
514.133 ....................................... C20–22, C25–27
514.138 ......................................................C25–27
515.018 ....................................... C20–30, C60–61
515.022 .......................C20–22, C25–27, C29, C60
515.028 ......................................................C25–27
551.129 ............................................................ C34
551.130 ............................................................ C34
551.316 ..............................................C31, C62–64
551.317 ......................................C31–34, C62, C64
551.332 ............................................................ C32
551.333 ............................................................ C35
552.210 ............................................................ C64
552.220 .................................................... C31, C62
552.221 ..............................................C31–32, C62
552.225 ............................................................ C63
552.228 ......................................................C32–33
552.229 ............................................................ C35
552.230 ............................................................ C35
552.232 ......................................................C63–64
552.240 ......................................................C33–34
554.252 ....................................... C31–35, C62–64
554.253 ............................................................ C62
554.254 ............................................................ C63
557.111 ............................. C31, C33–35, C62, C64
557.125 ......................................................C32–33
206264 ............................................................E122
206265 ............................................................E122
206266 ............................................................E122
206271 ............................................................E125
206272 ............................................................E122
206273 ............................................................E122
206274 ............................................................E122
206275 ............................................................E122
206276 ............................................................E122
206277 ............................................................E122
206278 ............................................................E122
206279 ............................................................E122
206280 ............................................................E122
206281 ............................................................E122
206282 ............................................................E122
206283 ............................................................E122
206284 ............................................................E122
206285 ............................................................E122
206408 ............................................................E126
206411 ............................................................E127
206417 ............................................................E123
206418 ............................................................E123
206419 ............................................................E123
206424 ............................................................E123
206440 ............................................................E125
206443 ............................................................E127
206445 ............................................................E122
206446 ............................................................E122
206447 ............................................................E122
206448 ............................................................E122
206449 ............................................................E122
206450 ............................................................E122
206451 ............................................................E122
206452 ............................................................E122
206453 ............................................................E122
206454 ............................................................E122
206455 ............................................................E122
206456 ............................................................E122
206506 ............................................................E128
206507 ............................................................E128
206509 ............................................................E128
206518 ................................................... E124–125
206519 ................................................... E124–125
206522 ................................................... E124–125
206523 ................................................... E124–125
309105 ............................................................E127
309111 ............................................................E127
310102 ............................................................E126
310108 ............................................................E126
310109 ............................................................E126
331101 ............................................................E125
331102 ............................................................E125
331109 ............................................................E125
331110 ............................................................E125
331117 ............................................................E125
331118 ............................................................E125
333101 ............................................................E124
333102 ............................................................E124
333103 ............................................................E124
333104 ............................................................E124
333111 ............................................................E124
409182 ............................................................E128
409183 ............................................................E128
409185 ............................................................E128
435101 ..................................................E107, E126
435102 ............................................................E126
435103 ............................................................E127
435104 ............................................................E126
435105 ............................................................E126
435106 ............................................................E127
435109 ............................................................E126
435110 ............................................................E126
435116 ............................................................E126
435117 ............................................................E126
435126 ............................................................E122
435127 ............................................................E122
435128 ............................................................E125
435129 ............................................................E125
435130 ............................................................E122
435131 ............................................................E122
435136 ............................................................E127
435137 ............................................................E127
435140 ............................................................E122
435141 ............................................................E122
435142 ............................................................E125
435143 ............................................................E125
435148 ............................................................E126
435149 ............................................................E126
435150 ............................................................E126
435151 ............................................................E126
435152 ............................................................E122
435153 ............................................................E122
435154 ............................................................E124
435155 ............................................................E124
435156 ............................................................E124
435157 ............................................................E124
435170 ............................................................E122
435171 ............................................................E122
435180 ............................................................E123
435181 ............................................................E123
435194 ............................................................E124
435200 ............................................................E122
435201 ............................................................E122
435202 ............................................................E122
435203 ............................................................E122
435204 ............................................................E122
435205 ............................................................E122
606243 ............................................................E128
606244 ............................................................E128
606247 ................................................... E124–125
613139 ............................................................E128
619168 ..............................................................E35
12146006300 ........................................ M102–104
12146010000 ............................ V10, V13, V16, V19
12146034500 ................. H5–7, H12–15, H20, H26,
H30, H32, H38
12146101000 ................................................... H26
12146101800 ................................................... H26
12146107000 ...........H15, H20, H26, H32, H38, J24
12146109200 ...................................H15, H20, H32
12146109400 .................. H15, H20, H26, H32, H38
12146111000 .................. H15, H20, H26, H32, H38
12146111100 ........................... H26, H32, H38, J24
12146111200 ................................................... H32
12146111300 ................................................... H32
12146111400 ................................................... H32
12146120500 ....................H7, H15, H20, H26, H38,
J8, M6, M12
12147549000 ............................. M42–43, M46–48
12148000600 ......................H44–45, I4–6, J44, K4,
L4, M78–79, M84–85
12148005900 .................................................. W51
12148007500 .......... H52–53, H58, I7, J48, L4, L11,
M90–91, M96, V10, V13, V16, V19
12148050000 ............................... L24–25, L27–28
12148068700 .... C68, C74, C77, L4, W43, W45–49,
W51, W54–55
12148082400 ......... H5–7, H12–15, H20, H26, H30,
H32, H38, M52–55, M59–62, V10,
V13, V16, V19, W42, W44–45, W54–55
12148086800 ........................................ M102–104
12148099300 .................... M102–105, M118–120,
............................................................... M124–126
12148099400 ............................. M66–67, W42–45
12148783700 ......................................................K4
12191062686 ..................................................E107
12346233000 .................................................. W38
12346292200 ............................................W52–53
12748701000 ............. H7, H15, H20, H26, H32, H38
022801-000020 K30F ................................O88–89
022801-000025 K30F ................................O88–89
022801-000030 K30F ................................O88–89
022801-000035 K30F ................................O88–89
022801-000040 K30F ..............................O88, O90
022801-000050 K30F ..............................O88, O90
022801-000060 K30F ..............................O88, O90
022801-000070 K30F ..............................O88, O90
022801-000080 K30F ..............................O88, O90
022801-000090 K30F ................................O89–90
022801-000120 K30F ................................O89–90
022801-000200 K30F ................................O89–90
022802-000020 K30F ...................................... O88
022802-000025 K30F ...................................... O88
022802-000030 K30F ...................................... O88
022802-000035 K30F ...................................... O88
022802-000040 K30F ...................................... O88
022802-000045 K30F ..............................O88, O90
022802-000050 K30F ...................................... O88
022802-000060 K30F ...................................... O88
022802-000090 K30F ...................................... O89
022802-000100 K30F ................................O89–90
Catalogue No. Page(s) Catalogue No. Page(s) Catalogue No. Page(s)
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 76 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRANDO b 28 20153 09PM
Z77
widia.com
Index by Catalogue Number
Catalogue No. Page(s)
022802-000140 K30F ................................O89–90
022802-000200 K30F ...................................... O89
022804-000020 K30F ................................O88–89
022804-000025 K30F ................................O88–89
022804-000030 K30F ................................O88–89
022804-000035 K30F ................................O88–89
022804-000040 K30F ..............................O88, O90
022804-000045 K30F ..............................O88, O90
022804-000050 K30F ..............................O88, O90
022804-000060 K30F ..............................O88, O90
022804-000070 K30F ..............................O88, O90
022804-000080 K30F ..............................O88, O90
022804-000090 K30F ................................O89–90
022804-000100 K30F ................................O89–90
022804-000120 K30F ................................O89–90
022804-000140 K30F ................................O89–90
022804-000160 K30F ................................O89–90
022804-000200 K30F ................................O89–90
022806-000020 K30F ...................................... O88
022806-000025 K30F ...................................... O88
022806-000030 K30F ...................................... O88
022806-000035 K30F ...................................... O88
022806-000040 K30F ...................................... O88
022806-000045 K30F ...................................... O88
022806-000050 K30F ...................................... O88
022806-000060 K30F ...................................... O88
022806-000070 K30F ...................................... O88
022806-000080 K30F ...................................... O88
022806-000090 K30F ...................................... O89
022806-000100 K30F ...................................... O89
022806-000120 K30F ...................................... O89
022806-000140 K30F ...................................... O89
022806-000160 K30F ...................................... O89
022806-000180 K30F ................................O89–90
022806-000200 K30F ...................................... O89
022813-000060 K30F ...................................... O63
022813-000080 K30F ...................................... O63
022813-000100 K30F ...................................... O63
022813-000120 K30F ...................................... O63
022813-000160 K30F ...................................... O63
022813-000200 K30F ...................................... O63
022813-000250 K30F ...................................... O63
022814-000040 K10F .................................... O135
022814-000050 K10F .................................... O135
022814-000060 K10F .................................... O135
022814-000080 K10F .................................... O135
022814-000100 K10F .................................... O135
022814-000120 K10F .................................... O135
022814-000140 K10F .................................... O135
022814-000160 K10F .................................... O135
022814-000180 K10F .................................... O135
022814-000200 K10F .................................... O135
022817-000040 K10F .................................... O135
022817-000050 K10F .................................... O135
022817-000060 K10F .................................... O135
022817-000080 K10F .................................... O135
022817-000100 K10F .................................... O135
022817-000120 K10F .................................... O135
022817-000140 K10F .................................... O135
022817-000160 K10F .................................... O135
022817-000180 K10F .................................... O135
022817-000200 K10F .................................... O135
022818-000060 K30F ...................................... O64
022818-000080 K30F ...................................... O64
022818-000100 K30F ...................................... O64
022818-000120 K30F ...................................... O64
022818-000160 K30F ...................................... O64
022818-000200 K30F ...................................... O64
022846-000060 K30F ...................................... O65
022846-000080 K30F ...................................... O65
022846-000100 K30F ...................................... O65
022846-000120 K30F ...................................... O65
022846-000160 K30F ...................................... O65
022846-000200 K30F ...................................... O65
022846-000250 K30F ...................................... O65
022849-000020 K10F .................................... O133
022849-000030 K10F .................................... O133
022849-000040 K10F .................................... O133
022849-000050 K10F .................................... O133
022849-000060 K10F .................................... O133
022849-000080 K10F .................................... O133
022849-000100 K10F .................................... O133
022849-000120 K10F .................................... O133
022852-003005 K10F .................................... O137
022852-004005 K10F .................................... O137
022852-004010 K10F .................................... O137
022852-005005 K10F .................................... O137
022852-005010 K10F .................................... O137
022852-006005 K10F .................................... O137
022852-006010 K10F .................................... O137
022852-006020 K10F .................................... O137
022852-008005 K10F .................................... O137
022852-008010 K10F .................................... O137
022852-008020 K10F .................................... O137
022852-010005 K10F .................................... O137
022852-010010 K10F .................................... O137
022852-010020 K10F .................................... O137
022852-012005 K10F .................................... O137
022852-012010 K10F .................................... O137
022852-012020 K10F .................................... O137
022852-016005 K10F .................................... O137
022852-016010 K10F .................................... O137
022852-016020 K10F .................................... O137
022852-016030 K10F .................................... O137
023007-000004 K30F .................................... O116
023007-000005 K30F .................................... O116
023007-000006 K30F .................................... O116
023007-000008 K30F .................................... O116
023007-000010 K30F .................................... O116
023007-000012 K30F .................................... O116
023007-000015 K30F .................................... O116
023007-000018 K30F .................................... O116
023007-000020 K30F .................................... O116
023007-000025 K30F .................................... O116
023007-000030 K30F .................................... O116
024101-000060 PKD ......................................O138
024101-000080 PKD ......................................O138
024101-000100 PKD ......................................O138
024111-000020 K10F-DIA ................................O98
024111-000030 K10F-DIA ................................O98
024111-000040 K10F-DIA ................................O98
024111-000050 K10F-DIA ................................O98
024111-000060 K10F-DIA ................................O98
024111-000080 K10F-DIA ................................O98
024111-000100 K10F-DIA ................................O98
024111-000120 K10F-DIA ................................O98
024112-006005 K10F-DIA ................................O97
024112-008010 K10F-DIA ................................O97
024112-010020 K10F-DIA ................................O97
026621-000080 CERMET ................................. O96
026621-000120 CERMET ................................. O96
026621-000160 CERMET ................................. O96
026621-000200 CERMET ................................. O96
050221-000014 K10 ......................................... W8
050221-000015 K10 ......................................... W8
050221-000016 K10 ......................................... W8
050221-000020 K10 ......................................... W8
050221-000022 K10 ......................................... W8
050221-000025 K10 ......................................... W8
050221-000028 K10 ......................................... W8
050221-000030 K10 ......................................... W8
050221-000032 K10 ......................................... W8
050221-000035 K10 ......................................... W8
050221-000040 K10 ......................................... W8
050221-000045 K10 ......................................... W8
050221-000050 K10 ......................................... W8
050221-000055 K10 ......................................... W8
050221-000060 K10 ......................................... W8
050221-000065 K10 ......................................... W8
050221-000070 K10 ......................................... W8
050221-000075 K10 ......................................... W8
050221-000080 K10 ......................................... W8
050221-000085 K10 ......................................... W8
050221-000090 K10 ......................................... W8
050221-000095 K10 ......................................... W8
050221-000100 K10 ......................................... W8
050222-000200 K10F ..................................... W13
050222-000300 K10F ..................................... W13
050222-000400 K10F ..................................... W13
050227-000200 K10F ....................................... W9
050227-000300 K10F ....................................... W9
050227-000400 K10F ....................................... W9
050227-000500 K10F ....................................... W9
050227-000600 K10F ....................................... W9
050227-000800 K10F ....................................... W9
050227-001000 K10F ....................................... W9
050227-001200 K10F ....................................... W9
050227-001400 K10F ....................................... W9
050270-000500 K10F ..................................... W14
050270-000600 K10F ..................................... W14
050270-000800 K10F ..................................... W14
050270-001000 K10F ..................................... W14
050270-001200 K10F ..................................... W14
050270-001400 K10F ..................................... W14
050271-000500 K10F ..................................... W10
050271-000600 K10F ..................................... W10
050271-000800 K10F ..................................... W10
050271-001000 K10F ..................................... W10
050271-001200 K10F ..................................... W10
050271-001400 K10F ..................................... W10
050280-001400 K10F ..................................... W15
050280-001600 K10F ..................................... W15
050280-001800 K10F ..................................... W15
050280-002000 K10F ..................................... W15
050280-002200 K10F ..................................... W15
050280-002400 K10F ..................................... W15
050280-002500 K10F ..................................... W15
050280-002600 K10F ..................................... W15
050280-002800 K10F ..................................... W15
050280-003000 K10F ..................................... W15
050280-003200 K10F ..................................... W15
050281-001400 K10F ..................................... W11
050281-001600 K10F ..................................... W11
050281-001800 K10F ..................................... W11
050281-002000 K10F ..................................... W11
050281-002200 K10F ..................................... W11
050281-002400 K10F ..................................... W11
050281-002500 K10F ..................................... W11
050281-002600 K10F ..................................... W11
050281-002800 K10F ..................................... W11
050281-003000 K10F ..................................... W11
12146003800 W ..............................................E104
12146009500 W ..............................................E104
12146011800 W ........................ V10, V13, V16, V19
12146012600 W ..................................... E102–103
12146012700 W ..................................... E102–103
12146013400 W ..............................................E104
12147519100 W ............................... W38–39, W41
12147522400 W .............................................. W64
12147548500 W ................................................L18
12147548600 W ................................................L18
12147562300 W ................................................L18
12147572400 W ................................................L18
12147579300 W ........................................ W44–45
12147600100 W ........................................ W36–37
12147600200 W ........................................ W36–37
12147600300 W ............................... W36–38, W40
12147600400 W ........................................ W36–37
12147602200 W ........................................ W42–45
12147602300 W ........................................ W36–37
12147602400 W ........................................ W36–37
12147602500 W ........................................ W36–37
12147602600 W ........................................ W36–37
12147602700 W ........................................ W36–37
12147602800 W ........................................ W36–37
12147603900 W ........................................ W36–37
12147604000 W ........................................ W36–37
12147613500 W .............................................. W38
12147617400 W .............................................. W50
12147620000 W ........................................ W52–53
12147620300 W ........................................ W52–53
12147620400 W ........................................ W52–53
12147620500 W ........................................ W52–53
12147620600 W ........................................ W52–53
12147621100 W ........................................ W52–53
12147621200 W ........................................ W52–53
12147621300 W ........................................ W52–53
12147621400 W ........................................ W52–53
12147621500 W ........................................ W52–53
12147621600 W ........................................ W52–53
12147622300 W ........................................ W52–53
12147625200 W .............................................. W41
12147625400 W .........................................K4, W40
12147665000 W ............................... W39, W42–45
12147666700 W .............................................. W40
12147676800 W ................................................L18
12147676900 W ................................................L18
12147677000 W ................................................L18
12147680200 W ........................................ W52–53
12147680300 W ........................................ W52–53
12147680400 W ........................................ W52–53
12147680500 W .........................W49–50, W52–53
12147680600 W ........................................ W52–53
12147680700 W ........................................ W52–53
12147739800 W .............................................. W41
12147739900 W .............................................. W40
12147740200 W .............................................. W38
12147789100 W ................................................F75
12148001100 W ................................................F75
12148001300 W ...............................................M74
12148005800 W .............................. C67, C70, W51
12148007200 W ..............H52–53, H58, I7, L4, L11,
M90–91, M96, W42, W45
12148021100 W ..............................................E107
12148021900 W ..............................................E107
12148024100 W ..............................................E107
12148024200 W ..............................................E107
12148024500 W ..............................................E107
12148024800 W ..............................................E107
12148031686 TTR ...........................................E107
12148032086 TTR ...........................................E107
12148032586 W ..............................................E107
Catalogue No. Page(s) Catalogue No. Page(s) Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 77 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRAND O b 28 2015 3 09 PM
Z78 widia.com
Index by Catalogue Number
Index
Catalogue No. Page(s)
12148036000 W ..............................................E104
12148036300 W ....................................... C66, C68
12148036700 W ........................................ M78–79
12148037700 W ..........................................J44, K4
12148038800 W ..............C44, C68, C72, C74, C77,
H44–45, L4, M84–85,
W42–43, W54–55
12148040900 W ............... E106, W42–45, W52–53
12148041000 W ............... E106, W42–45, W52–53
12148041100 W ................. E102–103, E106, W39,
W42–45, W49–50, W52–53,
W56, W58, W60, W62, W65–66
12148041200 W .....................E106, W41, W52–53,
W56–62, W65–66
12148041300 W ............ E102–104, W41, W49–50,
W52–53, W56–63, W65–66
12148041400 W ............................. E104, W52–53,
W56–63, W65–66
12148042400 W ........................................ W49–50
12148046000 W .............................. E106, W44–45
12148060600 W ..............................................E106
12148060700 W ..............................................E106
12148060800 W ..............................................E106
12148067200 W .............L4, L10–11, L24–25, W42
12148069600 W ........................................ W42–45
12148079000 W ........................................ W52–53
12148080000 W ............................... C72, C74, L10
12148086600 W ..........................L4, L10–11, M74,
W42–48, W51, W54–55
12148087100 W ........................................ W52–53
12148094300 W ..............................................E106
12148094400 W ..............................................E106
12148094500 W ..............................................E106
12148094600 W ..............................................E106
12148094700 W ..............................................E106
12148095100 W ...............................................I4–6
12148541600 W .............................................. W44
12148574000 W ..............................................E106
12148574100 W ................. E106, L24–25, L27–28
12148574900 W ..............................................E106
12148575900 W ........................................ W52–53
12148580011 TTR ...........................................E107
12148580411 W ..............................................E107
12148580511PKG W .......................................E107
12148580611 W ..............................................E107
12148582511 W ..............................................E107
12148586000 W ..............................................E107
12148586611 TTR ...........................................E107
12148586800 W ..............................................E107
12148586900 W ..............................................E107
12148587011 TTR ...........................................E107
12148587111 TTR ...........................................E107
12148588211 W ..............................................E107
12148588311 TTR ...........................................E107
12148588411 W ..............................................E107
12148589200 W ..............................................E107
12148589300 W ..............................................E107
12148589800 W ..............................................E107
12148591011 W ..............................................E107
12148591111 W ..............................................E107
12148596200 W ..................................... E102–103
12148788900 W ................M102–105, M118–120,
M124–126
12191061900 W ..............................................E107
12191062086 W ..............................................E107
12191062586 W ..............................................E107
12191063286 W ..............................................E107
12250023000 W ..............................................E102
12250023100 W ..............................................E102
12250023200 W ..............................................E102
12250025200 W ..............................................E102
12250110100 W ..............................................E106
12250110200 W ..............................................E106
12250110300 W ..............................................E106
12250110400 W ..............................................E106
12250110500 W ..............................................E106
12250110600 W ..............................................E106
12250110700 W ..............................................E106
12250110800 W ..............................................E106
12250110900 W ..............................................E106
12250111000 W ..............................................E106
12251212500 W ..............................................E104
12251213200 W ..............................................E104
12251221600 W ..............................................E104
12251221900 W ..............................................E104
12251222000 W ..............................................E104
12251222500 W ..............................................E104
12251223200 W ..............................................E104
12251233200 W ..............................................E104
12251234000 W ..............................................E104
12251332000 W ..............................................E104
12251342000 W ..............................................E104
12251343000 W ..............................................E104
12251344000 W ..............................................E104
12251352000 W ..............................................E104
12251353000 W ..............................................E104
12251354000 W ..............................................E104
12251355000 W ..............................................E104
12251356000 W ..............................................E104
12251358000 W ..............................................E104
12251368000 W ..............................................E104
12251762000 W ..............................................E103
12251762100 W ..............................................E103
12251762200 W ..............................................E103
12251762300 W ..............................................E103
12251762400 W ..............................................E103
12251762500 W ..............................................E103
12251763000 W ..............................................E103
12251763100 W ..............................................E103
12251763200 W ..............................................E103
12251763300 W ..............................................E103
12251763400 W ..............................................E103
12251763500 W ..............................................E103
12251764000 W ..............................................E103
12251764100 W ..............................................E103
12251764200 W ..............................................E103
12251764300 W ..............................................E103
12251764400 W ..............................................E103
12251764500 W ..............................................E103
12251765200 W ..............................................E103
12251765300 W ..............................................E103
12251765500 W ..............................................E103
12251766200 W ..............................................E103
12251766300 W ..............................................E103
12251766400 W ..............................................E103
12251766500 W ..............................................E103
12251768400 W ..............................................E103
12251768500 W ..............................................E103
12251782000 W ..............................................E102
12251782100 W ..............................................E102
12251783000 W ..............................................E102
12251783100 W ..............................................E102
12251783200 W ..............................................E102
12251783300 W ..............................................E102
12251783600 W ..............................................E102
12251783700 W ..............................................E102
12251784000 W ..............................................E102
12251784100 W ..............................................E102
12251784200 W ..............................................E102
12251784300 W ..............................................E102
12251784400 W ..............................................E102
12251784500 W ..............................................E102
12251785200 W ..............................................E102
12251785300 W ..............................................E102
12251785400 W ..............................................E102
12251785500 W ..............................................E102
12251786400 W ..............................................E102
12251786500 W ..............................................E102
12251788400 W ..............................................E102
12251788500 W ..............................................E102
12290900800 W ................................................L10
12290901200 W ................................................L10
12290911600 W ................................................L11
12290911800 W ................................................L11
12292510400 W ...................................................I4
12292510800 W ...................................................I4
12292511000 W ...................................................I4
12292511200 W ...................................................I6
12292511400 W ...................................................I7
12292511600 W ...................................................I7
12292550400 W ...................................................I5
12292550800 W ...................................................I5
12292551000 W ...................................................I5
12299510400 W ................................................L18
12299515500 W ................................................L18
12299515600 W ................................................L18
12299515700 W ................................................L18
12299515800 W ................................................L18
12299520400 W ................................................L18
12299525500 W ................................................L18
12299525600 W ................................................L18
12299525700 W ................................................L18
12299525800 W ................................................L18
12299526000 W ................................................L18
12299530400 W ................................................L18
12299535500 W ................................................L18
12299535600 W ................................................L18
12299535800 W ................................................L18
12299536000 W ................................................L18
12299545800 W ................................................L18
12299546000 W ................................................L18
12346292100 W ........................................ W52–53
123506599 THM ................................................L19
123506599 WK15CM.........................................L19
123506599 WP35CM.........................................L19
123506599 WP40PM .........................................L19
123506600 THM ................................................L20
123506600 WK15CM.........................................L20
123506600 WP35CM.........................................L20
123506600 WP40PM .........................................L20
123506601 THM ................................................L19
123506601 WK15CM.........................................L19
123506601 WP35CM.........................................L19
123506601 WP40PM .........................................L19
123506602 THM ................................................L20
123506602 WK15CM.........................................L20
123506602 WP35CM.........................................L20
123506602 WP40PM .........................................L20
123567230 TN6030 ...........................................E98
123567230 TN7525 ...........................................E98
123567230 TN7535 ...........................................E98
123567231 TN6030 ...........................................E98
123567231 TN7525 ...........................................E98
123567231 TN7535 ...........................................E98
123567240 TN6030 ...........................................E98
123567240 TN7525 ...........................................E98
123567240 TN7535 ...........................................E98
123567241 TN6030 ...........................................E98
123567320 THM ................................................E97
123567320 TN6030 ...........................................E97
123567320 TN7525 ...........................................E97
123567320 TN7535 ...........................................E97
123567320 TN8025 ...........................................E97
123567330 THM ................................................E97
123567330 TN6030 ...........................................E97
123567330 TN7535 ...........................................E97
123567330 TN8025 ...........................................E97
123567340 THM ................................................E97
123567340 TN6030 ...........................................E97
123567340 TN7525 ...........................................E97
123567340 TN7535 ...........................................E97
123567350 THM ................................................E97
123567350 TN6030 ...........................................E97
123567350 TN7525 ...........................................E97
123567350 TN7535 ...........................................E97
123567360 THM ................................................E97
123567360 TN6030 ...........................................E97
123567360 TN7525 ...........................................E97
123567360 TN7535 ...........................................E97
123567380 THM ................................................E97
123567380 TN6030 ...........................................E97
123567380 TN7535 ...........................................E97
123567380 TN8025 ...........................................E97
123567420 TN6030 ...........................................E99
123567420 TN7525 ...........................................E99
123567420 TN7535 ...........................................E99
123567430 TN6030 ...........................................E99
123567430 TN7525 ...........................................E99
123567430 TN7535 ...........................................E99
123567440 TN6030 ...........................................E99
123567440 TN7525 ...........................................E99
123567440 TN7535 ...........................................E99
123567440 TPC35 .............................................E99
123567450 TN6030 ...........................................E99
123567450 TN7525 ...........................................E99
123567450 TN7535 ...........................................E99
123567460 TN6030 ...........................................E99
123567460 TN7525 ...........................................E99
123567460 TN7535 ...........................................E99
123567480 TN6030 ...........................................E99
123567480 TN7525 ...........................................E99
123567480 TN7535 ...........................................E99
123567702 TN7535 .........................................E100
123567703 TN7535 .........................................E100
123567704 TN7535 .........................................E100
123567720 TN7535 .........................................E100
123567721 TN7535 .........................................E100
123567730 TN7535 .........................................E100
123567730 TN8025 .........................................E100
123567731 TN7535 .........................................E100
123567740 TN7535 .........................................E100
123567803 TN7525 .........................................E101
123567804 TN7525 .........................................E101
123567805 TN7525 .........................................E101
123567806 TN7525 .........................................E101
123568080 THM ..............................................E105
123568080 TN7525 .........................................E105
123568080 TN7535 .........................................E105
123568080 TTM ..............................................E105
123568081 THM ..............................................E105
123568100 THM ..............................................E105
123568100 TN7525 .........................................E105
Catalogue No. Page(s) Catalogue No. Page(s) Catalogue No. Page(s)
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 78 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRANDO b 28 20153 09PM
Z79
widia.com
Index by Catalogue Number
Catalogue No. Page(s)
123568100 TN7535 .........................................E105
123568120 THM ..............................................E105
123568120 TN7525 .........................................E105
123568120 TN7535 .........................................E105
123568121 THM ..............................................E105
123568140 THM ..............................................E105
123568140 TN7525 .........................................E105
123568140 TN7535 .........................................E105
123568141 THM ..............................................E105
123568160 THM ..............................................E105
123568160 TN7525 .........................................E105
123568160 TN7535 .........................................E105
123568160 TTM ..............................................E105
123568161 THM ..............................................E105
12391010000 W ...............................................M74
12391010400 W ...............................................M74
12391010600 W ...............................................M74
12391011000 W ...............................................M74
12391011400 W ...............................................M74
12391011600 W ...............................................M79
12391012000 W ...............................................M79
12391012400 W ...............................................M79
12391012800 W ...............................................M79
12391013200 W ...............................................M79
12391013800 W ...............................................M90
12391020000 W ...............................................M85
12391020200 W ...............................................M85
12391020400 W ...............................................M85
12391020600 W ...............................................M85
12391020800 W ...............................................M85
12391021000 W ...............................................M91
12391021200 W ...............................................M91
12391021400 W ...............................................M91
12391021600 W ...............................................M91
12391021800 W ...............................................M91
12391022000 W ...............................................M96
12391022200 W ...............................................M96
12391022400 W ...............................................M96
12391022600 W ...............................................M96
12391022800 W ...............................................M96
12391023200 W ...............................................M96
12391023400 W ...............................................M96
12391023600 W ...............................................M96
12391023800 W ...............................................M96
12391024000 W ...............................................M85
12391050200 W ...............................................M84
12391050400 W ...............................................M78
12391050600 W ...............................................M78
12391051000 W ...............................................M84
12391051200 W ...............................................M84
12391602600M W ...............................................L4
12391603000 W ..................................................L4
12391603400 W ..................................................L4
12391603800 W ..................................................L4
12393041200 W ..................................................K4
12393041400 W ..................................................K4
12393041800 W ..................................................K4
12393051200 W ............................................. K4–5
12393051400 W ............................................. K4–5
12393051800 W ............................................. K4–5
12395405200 W ............................................... H44
12395410200 W ............................................... H45
12395410400 W ............................................... H45
12395410600 W ............................................... H45
12395410800 W ............................................... H45
12395411000 W ............................................... H45
12395415800 W ............................................... H45
12396202200 W ............................................... H52
12396202600 W ............................................... H52
12396203800 W ............................................... H53
12396204200 W ............................................... H53
12396204600 W ............................................... H53
12396205000 W ............................................... H53
12396205400 W ............................................... H53
12396205800 W ............................................... H53
12396215000 W ............................................... H58
12396943800 W ................................................J48
12396944200 W ................................................J48
12396944600 W ................................................J48
12396945000 W ................................................J48
12396945400 W ................................................J48
12396953800 W ................................................J44
12396954000 W ................................................J44
12396954200 W ................................................J44
12396954400 W ................................................J44
12396954600 W ................................................J44
12396954800 W ................................................J44
12396955000 W ................................................J44
12396955200 W ................................................J44
12396955400 W ................................................J44
12396955600 W ................................................J44
12396955800 W ................................................J44
12396956000 W ................................................J44
12399010200 W ................................................L24
12399010400 W ................................................L24
12399010800 W ................................................L24
12399011400 W ................................................L24
12399011600 W ................................................L24
12399011800 W ................................................L24
12399012000 W ................................................L24
12399012800 W ................................................L24
12399013000 W ................................................L24
12399013200 W ................................................L24
12399013400 W ................................................L24
12399013600 W ................................................L24
12399014400 W ................................................L27
12399014600 W ................................................L27
12399014800 W ................................................L27
12399015600 W ................................................L27
12399015800 W ................................................L27
12399016000 W ................................................L27
12399110400 W ................................................L25
12399110600 W ................................................L25
12399110800 W ................................................L25
12399111400 W ................................................L25
12399111600 W ................................................L25
12399111800 W ................................................L25
12399112000 W ................................................L25
12399112800 W ................................................L25
12399113000 W ................................................L25
12399113200 W ................................................L25
12399113400 W ................................................L25
12399113600 W ................................................L25
12399114400 W ................................................L28
12399114600 W ................................................L28
12399114800 W ................................................L28
12399115600 W ................................................L28
12399115800 W ................................................L28
12399116000 W ................................................L28
12600020000 WG............................................ W40
12600027800 WG............................................ W40
12600035800 WG............................................ W40
12600043800 WG............................................ W40
12600208800 WG............................................ W38
12600210900 WG............................................ W38
12600213200 WG............................................ W38
12600215500 WG............................................ W38
12600217800 WG............................................ W38
12614020100 WG............................................ W41
12625702200 WG............................................ W44
12625703000 WG............................................ W44
12625704000 WG............................................ W44
12625705000 WG............................................ W44
12625706700 WG................................... W39, W44
12625708986 WG............................................ W44
12625804000 WG............................................ W43
12625805100 WG............................................ W43
12625806800 WG................................... W39, W43
12625902200 WG............................................ W45
12625903000 WG............................................ W45
12625904000 WG............................................ W45
12625905000 WG............................................ W45
12625906700 WG................................... W39, W45
12625908986 WG............................................ W45
12626003000 WG............................................ W42
12626004000 WG............................................ W42
12626005000 WG............................................ W42
12626006700 WG................................... W39, W42
12627006200 WG............................................ W51
12627008200 WG............................................ W51
12627010200 WG............................................ W51
12627013200 WG............................................ W51
12627016200 WG............................................ W51
12627019300 WG............................................ W51
12627270300 WG............................................ W54
12627270700 WG............................................ W54
12627270800 WG............................................ W55
12627275300 WG............................................ W54
12627276500 WG............................................ W54
12627276800 WG............................................ W55
12627277700 WG............................................ W54
12627277800 WG............................................ W55
12627278700 WG............................................ W54
12627278800 WG............................................ W55
12748210100 W ......................................... L24–25
12748210200 W ......................................... L24–25
12748210300 W ......................................... L24–25
12748210400 W ......................................... L24–25
12748210500 W ......................................... L24–25
12748210600 W ......................................... L24–25
12748210700 W ......................................... L27–28
12748210800 W ......................................... L27–28
12748210900 W ......................................... L27–28
12748211000 W ......................................... L27–28
12748307600 W ......................................... L24–25
12748307700 W ........................... L24–25, L27–28
12748307800 W ......................................... L27–28
12748308500 W ............................................... H72
12748551100 W ........................... L24–25, L27–28
12748551200 W ........................... L24–25, L27–28
12748600900 W ............................................... H72
12748605300 W ......................................... L27–28
12748610000 W ........................ V10, V13, V16, V19
12748610500 W ................M102–105, M119–120,
M125–126
12748610600 W ................M102–105, M118–120,
M124–126
12748610700 W ................M102–105, M118–120,
M124–126
12748610800 W ................M102–105, M118–120,
M124–126
12748610900 W .................................... M102–104
12748611000 W .................................... M102–104
12749723200 W ......................................... L27–28
12749726100 W ......................................... L24–25
12MHC030M ....................................................T117
12MHC040M ....................................................T117
12MHC050M ....................................................T117
12MHC060M ....................................................T117
12MHC070M ....................................................T117
12MHC080M ....................................................T117
12MHC090M ....................................................T117
12MHC100M ....................................................T117
1N0M03002LJ .................................................... Q8
1N0M04003LJ .................................................... Q8
1N0M05003LJ .................................................... Q8
1N0M06003LJ .................................................... Q8
1N0M08004LJ .................................................... Q8
1N0M10004LJ .................................................... Q8
1N0M12005LJ .................................................... Q8
1N0M14006LJ .................................................... Q8
1N0M16006LJ .................................................... Q8
1N0M18007LJ .................................................... Q8
1N0M20007LJ .................................................... Q8
1N0M22007LJ .................................................... Q8
1N7706002CT..................................................... Q9
1N7706002CW ................................................... Q9
1N7708004CT..................................................... Q9
1N7708004CW ................................................... Q9
1N7710004CT..................................................... Q9
1N7710004CW ................................................... Q9
1N7712005CT..................................................... Q9
1N7712005CW ................................................... Q9
1N7714005CT..................................................... Q9
1N7714005CW ................................................... Q9
1N7716006CT..................................................... Q9
1N7716006CW ................................................... Q9
1N7718006CT..................................................... Q9
1N7718006CW ................................................... Q9
1N7720007CT..................................................... Q9
1N7720007CW ................................................... Q9
1N7722007CT..................................................... Q9
1N7722007CW ................................................... Q9
1N7725008CT..................................................... Q9
1N7725008CW ................................................... Q9
1N7730008CT..................................................... Q9
1N7730008CW ................................................... Q9
20MHC030M ....................................................T117
20MHC040M ....................................................T117
20MHC050M ....................................................T117
20MHC060M ....................................................T117
20MHC070M ....................................................T117
20MHC080M ....................................................T117
20MHC090M ....................................................T117
20MHC100M ....................................................T117
20MHC110M ....................................................T117
20MHC120M ....................................................T117
20MHC130M ....................................................T117
20MHC140M ....................................................T117
20MHC150M ....................................................T117
20MHC160M ....................................................T117
25280400T011 TIALN ....................................... P34
25280400T011 UNCOATED ............................... P34
25280500T013 TIALN ....................................... P34
25280500T013 UNCOATED ............................... P34
25280600T013 TIALN ....................................... P34
25280600T013 UNCOATED ............................... P34
25280800T019 TIALN ....................................... P34
25280800T019 UNCOATED ............................... P34
25281000T022 TIALN ....................................... P34
25281000T022 UNCOATED ............................... P34
25281200T026 TIALN ....................................... P34
Catalogue No. Page(s) Catalogue No. Page(s) Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 79 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRAND O b 28 2015 3 09 PM
Z80 widia.com
Index by Catalogue Number
Index
Catalogue No. Page(s)
25281200T026 UNCOATED ............................... P34
25281400T026 TIALN ....................................... P34
25281400T026 UNCOATED ............................... P34
25281600T032 TIALN ....................................... P34
25281600T032 UNCOATED ............................... P34
25281800T032 TIALN ....................................... P34
25281800T032 UNCOATED ............................... P34
25282000T038 TIALN ....................................... P34
25282000T038 UNCOATED ............................... P34
25MHC030M ....................................................T117
25MHC040M ....................................................T117
25MHC050M ....................................................T117
25MHC060M ....................................................T117
25MHC070M ....................................................T117
25MHC080M ....................................................T117
25MHC090M ....................................................T117
25MHC100M ....................................................T117
25MHC120M ....................................................T117
25MHC140M ....................................................T117
25MHC160M ....................................................T117
28190300T007 TIALN ....................................... P16
28190300T007 UNCOATED ............................... P16
28190400T008 TIALN ....................................... P16
28190400T008 UNCOATED ............................... P16
28190500T010 TIALN ....................................... P16
28190500T010 UNCOATED ............................... P16
28190600T010 TIALN ....................................... P16
28190600T010 UNCOATED ............................... P16
28190700T013 TIALN ....................................... P16
28190700T013 UNCOATED ............................... P16
28190800T016 TIALN ....................................... P16
28190800T016 UNCOATED ............................... P16
28190900T016 TIALN ....................................... P16
28190900T016 UNCOATED ............................... P16
28191000T019 TIALN ....................................... P16
28191000T019 UNCOATED ............................... P16
28191200T022 TIALN ....................................... P16
28191200T022 UNCOATED ............................... P16
28191400T022 TIALN ....................................... P16
28191400T022 UNCOATED ............................... P16
28191500T026 TIALN ....................................... P16
28191500T026 UNCOATED ............................... P16
28191600T026 TIALN ....................................... P16
28191600T026 UNCOATED ............................... P16
28191800T026 TIALN ....................................... P16
28191800T026 UNCOATED ............................... P16
28192000T032 TIALN ....................................... P16
28192000T032 UNCOATED ............................... P16
28380200T007 TIALN ....................................... P20
28380300T007 TIALN ....................................... P20
28380300T007 UNCOATED ............................... P20
28380400T008 TIALN ....................................... P20
28380400T008 UNCOATED ............................... P20
28380500T010 TIALN ....................................... P20
28380500T010 UNCOATED ............................... P20
28380600T010 TIALN ....................................... P20
28380600T010 UNCOATED ............................... P20
28380800T016 TIALN ....................................... P20
28380800T016 UNCOATED ............................... P20
28381000T019 TIALN ....................................... P20
28381000T019 UNCOATED ............................... P20
28381200T022 TIALN ....................................... P20
28381200T022 UNCOATED ............................... P20
28381400T022 TIALN ....................................... P20
28381400T022 UNCOATED ............................... P20
28381600T026 TIALN ....................................... P20
28381600T026 UNCOATED ............................... P20
28382000T032 TIALN ....................................... P20
28382000T032 UNCOATED ............................... P20
28480400T011 TIALN ....................................... P38
28480400T011 UNCOATED ............................... P38
28480500T013 TIALN ....................................... P38
28480500T013 UNCOATED ............................... P38
28480600T013 TIALN ....................................... P38
28480600T013 UNCOATED ............................... P38
28480800T019 TIALN ....................................... P38
28480800T019 UNCOATED ............................... P38
28481000T022 TIALN ....................................... P38
28481000T022 UNCOATED ............................... P38
28481200T026 TIALN ....................................... P38
28481200T026 UNCOATED ............................... P38
28481400T026 TIALN ....................................... P38
28481400T026 UNCOATED ............................... P38
28481600T032 TIALN ....................................... P38
28481600T032 UNCOATED ............................... P38
28481800T032 TIALN ....................................... P38
28481800T032 UNCOATED ............................... P38
28482000T038 TIALN ....................................... P38
28482000T038 UNCOATED ............................... P38
2EL05ISO TN6025 ..............................................F49
2EL06ISO TN6025 ..............................................F49
2EL075ISO TN6025 ............................................F49
2EL07ISO TN6025 ..............................................F49
2EL08ISO TN6025 ..............................................F49
2EL10ISO TN6025 ..............................................F49
2EL125ISO TN6025 ............................................F49
2EL15ISO TN6025 ..............................................F49
2EL175ISO TN6025 ............................................F49
2ER15ISO TN6025 ..............................................F48
2ERA60 TN6025 .................................................F46
2IL035ISO TN6025 .............................................F52
2IL04ISO TN6025 ...............................................F52
2IL05ISO TN6025 ...............................................F52
2IL06ISO TN6025 ...............................................F52
2IL075ISO TN6025 .............................................F52
2IL07ISO TN6025 ...............................................F52
2IL08ISO TN6025 ...............................................F52
2IL125ISO TN6025 .............................................F52
2IL15ISO TN6025 ...............................................F52
2IL20ISO TN6025 ...............................................F52
2IL32UN TN6025 ................................................F57
2ILA60 TN6025 ..................................................F47
2IR075ISO TN6025 .............................................F51
2IR10ISO TN6025 ...............................................F51
2IR125ISO TN6025 .............................................F51
2IR14W TN6025 .................................................F63
2IR15ISO TN6025 ...............................................F51
2IR16UN TN6025 ................................................F56
2IR175ISO TN6025 .............................................F51
2IR18UN TN6025 ................................................F56
2IR19W TN6025 .................................................F63
2IR20UN TN6025 ................................................F56
2IR32UN TN6025 ................................................F56
2IRA55 TN6025 ..................................................F61
2IRA60 TN6025 ..................................................F47
322801-000020 K30F-TICN ..............................O88
322801-000025 K30F-TICN ..............................O88
322801-000030 K30F-TICN ..............................O88
322801-000035 K30F-TICN ..............................O88
322801-000040 K30F-TICN ..............................O88
322801-000045 K30F-TICN ..............................O88
322801-000050 K30F-TICN ..............................O88
322801-000060 K30F-TICN ..............................O88
322801-000070 K30F-TICN ..............................O88
322801-000080 K30F-TICN ..............................O88
322801-000090 K30F-TICN ..............................O89
322801-000100 K30F-TICN ..............................O89
322801-000120 K30F-TICN ..............................O89
322801-000140 K30F-TICN ..............................O89
322801-000160 K30F-TICN ........................O89–90
322801-000180 K30F-TICN ........................O89–90
322801-000200 K30F-TICN ..............................O89
322802-000020 K30F-TICN ..............................O88
322802-000025 K30F-TICN ..............................O88
322802-000030 K30F-TICN ..............................O88
322802-000035 K30F-TICN ..............................O88
322802-000040 K30F-TICN ..............................O88
322802-000045 K30F-TICN ..............................O88
322802-000050 K30F-TICN ..............................O88
322802-000060 K30F-TICN ..............................O88
322802-000070 K30F-TICN ..............................O88
322802-000080 K30F-TICN ..............................O88
322802-000090 K30F-TICN ..............................O89
322802-000100 K30F-TICN ..............................O89
322802-000120 K30F-TICN ..............................O89
322802-000140 K30F-TICN ..............................O89
322802-000160 K30F-TICN ..............................O89
322802-000180 K30F-TICN ..............................O89
322802-000200 K30F-TICN ..............................O89
322804-000020 K30F-TICN ..............................O88
322804-000025 K30F-TICN ..............................O88
322804-000030 K30F-TICN ..............................O88
322804-000035 K30F-TICN ..............................O88
322804-000040 K30F-TICN ..............................O88
322804-000045 K30F-TICN ..............................O88
322804-000050 K30F-TICN ..............................O88
322804-000060 K30F-TICN ..............................O88
322804-000070 K30F-TICN ..............................O88
322804-000080 K30F-TICN ..............................O88
322804-000090 K30F-TICN ..............................O89
322804-000100 K30F-TICN ..............................O89
322804-000120 K30F-TICN ..............................O89
322804-000140 K30F-TICN ..............................O89
322804-000160 K30F-TICN ..............................O89
322804-000180 K30F-TICN ..............................O89
322804-000200 K30F-TICN ..............................O89
322806-000020 K30F-TICN ..............................O88
322806-000025 K30F-TICN ..............................O88
322806-000030 K30F-TICN ..............................O88
322806-000035 K30F-TICN ..............................O88
322806-000040 K30F-TICN ..............................O88
322806-000045 K30F-TICN ..............................O88
322806-000050 K30F-TICN ..............................O88
322806-000060 K30F-TICN ..............................O88
322806-000070 K30F-TICN ..............................O88
322806-000080 K30F-TICN ..............................O88
322806-000090 K30F-TICN ..............................O89
322806-000100 K30F-TICN ..............................O89
322806-000120 K30F-TICN ..............................O89
322806-000140 K30F-TICN ..............................O89
322806-000160 K30F-TICN ..............................O89
322806-000180 K30F-TICN ..............................O89
322806-000200 K30F-TICN ..............................O89
323001-000020 K30F-TICN .................................P4
323001-000030 K30F-TICN .................................P4
323001-000040 K30F-TICN .................................P4
323001-000050 K30F-TICN .................................P4
323001-000060 K30F-TICN .................................P4
323001-000080 K30F-TICN .................................P4
323001-000100 K30F-TICN .................................P4
323001-000120 K30F-TICN .................................P4
323002-000020 K30F-TICN .................................P4
323002-000030 K30F-TICN .................................P4
323002-000040 K30F-TICN .................................P4
323002-000050 K30F-TICN .................................P4
323002-000060 K30F-TICN .................................P4
323002-000080 K30F-TICN .................................P4
323002-000100 K30F-TICN .................................P4
323002-000120 K30F-TICN .................................P4
32MHC060M ....................................................T117
32MHC070M ....................................................T117
32MHC080M ....................................................T117
32MHC090M ....................................................T117
32MHC100M ....................................................T117
32MHC110M ....................................................T117
32MHC120M ....................................................T117
32MHC130M ....................................................T117
32MHC140M ....................................................T117
32MHC150M ....................................................T117
32MHC160M ....................................................T117
3EL035ISO TN6025 ............................................F49
3EL045ISO TN6025 ............................................F49
3EL04ISO TN6025 ..............................................F49
3EL06ISO TN6025 ..............................................F50
3EL10ISO TN6025 ..............................................F50
3EL10UN TN6025 ...............................................F55
3EL11UN TN6025 ...............................................F55
3EL11W TN6025 ................................................F62
3EL12UN TN6025 ...............................................F55
3EL13UN TN6025 ...............................................F55
3EL15ISO TN6025 ..............................................F50
3EL175ISO TN6025 ............................................F50
3EL20ISO TN6025 ..............................................F50
3EL30ISO TN6025 ..............................................F50
3EL3TR TN6025 .................................................F67
3EL8RD TN6025 .................................................F65
3EL8W TN6025 ..................................................F62
3ELAG60 TN6025 ...............................................F46
3ELG55 TN6025 .................................................F60
3ELG60 TN6025 .................................................F46
3ER05ISO TN6025 ..............................................F48
3ER075ISO TN6025 ............................................F48
3ER07ISO TN6025 ..............................................F48
3ER08ISO TN6025 ..............................................F48
3ER10APIRD TN6025..........................................F64
3ER10ISO TN6025 ..............................................F48
3ER10UN TN6025...............................................F55
3ER10W TN6025 ................................................F62
3ER115NPT TN6025 ...........................................F58
3ER11UN TN6025...............................................F55
3ER11W TN6025 ................................................F62
3ER125ISO TN6025 ............................................F48
3ER12UN TN6025...............................................F55
3ER12W TN6025 ................................................F62
3ER13UN TN6025...............................................F55
3ER14NPT TN6025 .............................................F58
3ER14UN TN6025...............................................F54
3ER14W TN6025 ................................................F62
3ER15ISO TN6025 ..............................................F48
3ER16UN TN6025...............................................F54
3ER16W TN6025 ................................................F62
3ER175ISO TN6025 ............................................F48
3ER18NPT TN6025 .............................................F58
3ER18UN TN6025...............................................F54
3ER18W TN6025 ................................................F62
3ER19W TN6025 ................................................F62
3ER20ISO TN6025 ..............................................F48
3ER20UN TN6025...............................................F54
3ER24UN TN6025...............................................F54
3ER25ISO TN6025 ..............................................F48
3ER27UN TN6025...............................................F54
3ER28UN TN6025...............................................F54
Catalogue No. Page(s) Catalogue No. Page(s) Catalogue No. Page(s)
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 80 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRANDO b 28 20153 09PM
Z81
widia.com
Index by Catalogue Number
Catalogue No. Page(s)
3ER28W TN6025 ................................................F62
3ER2TR TN6025 .................................................F67
3ER30ISO TN6025 ..............................................F48
3ER32UN TN6025...............................................F54
3ER32W TN6025 ................................................F62
3ER36UN TN6025...............................................F54
3ER3TR TN6025 .................................................F67
3ER40UN TN6025...............................................F54
3ER48UN TN6025...............................................F54
3ER8NPT TN6025 ...............................................F58
3ER8RD TN6025.................................................F65
3ER8UN TN6025.................................................F55
3ER8W TN6025 ..................................................F62
3ERA55 TN6025 .................................................F60
3ERA60 TN6025 .................................................F46
3ERAG55 TN6025...............................................F60
3ERAG60 TN6025...............................................F46
3ERG55 TN6025 .................................................F60
3ERG60 TN6025 .................................................F46
3IL035ISO TN6025 .............................................F53
3IL04ISO TN6025 ...............................................F53
3IL05ISO TN6025 ...............................................F53
3IL06ISO TN6025 ...............................................F53
3IL075ISO TN6025 .............................................F53
3IL07ISO TN6025 ...............................................F53
3IL12UN TN6025 ................................................F57
3IL15ISO TN6025 ...............................................F53
3IL20ISO TN6025 ...............................................F53
3IL25ISO TN6025 ...............................................F53
3IL30ISO TN6025 ...............................................F53
3IL56UN TN6025 ................................................F57
3IL64UN TN6025 ................................................F57
3IL8RD TN6025 ..................................................F66
3IL8UN TN6025 ..................................................F57
3IL9UN TN6025 ..................................................F57
3ILA55 TN6025 ..................................................F61
3ILAG55 TN6025 ................................................F61
3ILAG60 TN6025 ................................................F47
3ILG60 TN6025 ..................................................F47
3IR05ISO TN6025 ...............................................F51
3IR075ISO TN6025 .............................................F51
3IR10APIRD TN6025 ...........................................F64
3IR10ISO TN6025 ...............................................F51
3IR10RD TN6025 ................................................F66
3IR10UN TN6025 ................................................F57
3IR115NPT TN6025 ............................................F59
3IR11W TN6025 .................................................F63
3IR125ISO TN6025 .............................................F51
3IR12UN TN6025 ................................................F57
3IR12W TN6025 .................................................F63
3IR14NPT TN6025 ..............................................F59
3IR14UN TN6025 ................................................F56
3IR14W TN6025 .................................................F63
3IR15ISO TN6025 ...............................................F51
3IR16PG TN6025 ................................................F65
3IR16UN TN6025 ................................................F56
3IR16W TN6025 .................................................F63
3IR175ISO TN6025 .............................................F51
3IR18NPT TN6025 ..............................................F59
3IR18UN TN6025 ................................................F56
3IR19W TN6025 .................................................F63
3IR20ISO TN6025 ...............................................F51
3IR20UN TN6025 ................................................F56
3IR24UN TN6025 ................................................F56
3IR25ISO TN6025 ...............................................F51
3IR28UN TN6025 ................................................F56
3IR30ISO TN6025 ...............................................F51
3IR32UN TN6025 ................................................F56
3IR3TR TN6025 ..................................................F68
3IR8APIRD TN6025 .............................................F64
3IR8NPT TN6025 ................................................F59
3IR8RD TN6025 ..................................................F66
3IR8UN TN6025 ..................................................F57
3IR8W TN6025 ...................................................F63
3IRA55 TN6025 ..................................................F61
3IRA60 TN6025 ..................................................F47
3IRAG55 TN6025 ................................................F61
3IRAG60 TN6025 ................................................F47
3IRG55 TN6025 ..................................................F61
3IRG60 TN6025 ..................................................F47
40000200T006 TIALN ....................................... P39
40000300T020 TIALN ....................................... P39
40000400T014 TIALN ....................................... P39
40000500T016 TIALN ....................................... P39
40000600T016 TIALN ....................................... P39
40000800T019 TIALN ....................................... P39
40001000T022 TIALN ....................................... P39
40001200T025 TIALN ....................................... P39
40001400T032 TIALN ....................................... P39
40001600T032 TIALN ....................................... P39
40001800T038 TIALN ....................................... P39
400101001T WP15PE ....................................... O84
40010100T004 TIALN ....................................... P21
40010100T004 UNCOATED ............................... P21
400101501T WP15PE ....................................... O84
40010150T005 TIALN ....................................... P21
40010150T005 UNCOATED ............................... P21
400102001T WP15PE ....................................... O84
40010200T006 TIALN ....................................... P21
40010200T006 UNCOATED ............................... P21
40010250T007 TIALN ....................................... P21
40010250T007 UNCOATED ............................... P21
400103002T WP15PE ....................................... O84
40010300T009 TIALN ....................................... P21
40010300T009 UNCOATED ............................... P21
40010350T012 TIALN ....................................... P21
400104002T WP15PE ....................................... O84
40010400T012 TIALN ....................................... P21
40010400T012 UNCOATED ............................... P21
400105002T WP15PE ....................................... O84
40010500T014 UNCOATED ............................... P21
400106002T WP15PE ....................................... O84
40010600T020 TIALN ....................................... P21
40010600T020 UNCOATED ............................... P21
400108003T WP15PE ....................................... O84
40010800T020 TIALN ....................................... P21
40010800T020 UNCOATED ............................... P21
400110004T WP15PE ....................................... O84
40011000T022 TIALN ....................................... P21
40011000T022 UNCOATED ............................... P21
400112005T WP15PE ....................................... O84
40011200T025 TIALN ....................................... P22
40011200T025 UNCOATED ............................... P22
400114005T WP15PE ....................................... O84
40011400T032 TIALN ....................................... P22
40011400T032 UNCOATED ............................... P22
400116006T WP15PE ....................................... O84
40011600T032 TIALN ....................................... P22
40011600T032 UNCOATED ............................... P22
400118006T WP15PE ....................................... O84
400120007T WP15PE ....................................... O84
40012000T038 TIALN ....................................... P22
40012000T038 UNCOATED ............................... P22
40020100T004 TIALN ....................................... P17
40020150T004 TIALN ....................................... P17
40020180T004 TIALN ....................................... P17
40020200T006 TIALN ....................................... P17
40020250T006 TIALN ....................................... P17
40020300T009 TIALN ....................................... P17
40020300T019 TIALN ....................................... P17
40020350T012 TIALN ....................................... P17
40020400T012 TIALN ....................................... P17
40020400T019 TIALN ....................................... P17
40020450T014 TIALN ....................................... P17
40020480T014 TIALN ....................................... P17
40020500T014 TIALN ....................................... P17
40020500T020 TIALN ....................................... P17
40020550T014 TIALN ....................................... P17
40020600T016 TIALN ....................................... P17
40020600T028 TIALN ....................................... P17
40020700T020 TIALN ....................................... P18
40020800T020 TIALN ....................................... P18
40020800T028 TIALN ....................................... P18
40020900T020 TIALN ....................................... P18
40021000T022 TIALN ....................................... P18
40021000T032 TIALN ....................................... P18
40021100T025 TIALN ....................................... P18
40021200T025 TIALN ....................................... P18
40021200T045 TIALN ....................................... P18
40021400T032 TIALN ....................................... P18
40021400T050 TIALN ....................................... P18
40021600T032 TIALN ....................................... P18
40021600T056 TIALN ....................................... P18
40021800T038 TIALN ....................................... P18
40021800T060 TIALN ....................................... P18
40022000T038 TIALN ....................................... P18
40022000T056 TIALN ....................................... P18
40040100T004 TIALN ....................................... P35
40040100T004 UNCOATED ............................... P35
40040150T004 TIALN ....................................... P35
40040150T004 UNCOATED ............................... P35
40040200T006 TIALN ....................................... P35
40040200T006 UNCOATED ............................... P35
40040250T006 TIALN ....................................... P35
40040250T006 UNCOATED ............................... P35
40040300T009 TIALN ....................................... P35
40040300T009 UNCOATED ............................... P35
40040350T012 TIALN ....................................... P35
40040350T012 UNCOATED ............................... P35
40040400T011 TIALN ....................................... P35
40040400T011 UNCOATED ............................... P35
40040450T014 TIALN ....................................... P35
40040450T014 UNCOATED ............................... P35
40040500T013 TIALN ....................................... P35
40040500T020 TIALN ....................................... P35
40040500T020 UNCOATED ............................... P35
40040600T016 TIALN ....................................... P35
40040600T016 UNCOATED ............................... P35
40040700T020 TIALN ....................................... P35
40040800T020 TIALN ....................................... P36
40040800T020 UNCOATED ............................... P36
40040900T020 TIALN ....................................... P36
40041000T022 TIALN ....................................... P36
40041000T022 UNCOATED ............................... P36
40041200T025 TIALN ....................................... P36
40041200T025 UNCOATED ............................... P36
40041200W025 TIALN ...................................... P36
40041200W025 UNCOATED.............................. P36
40041400T032 TIALN ....................................... P36
40041400T032 UNCOATED ............................... P36
40041400W032 TIALN ...................................... P36
40041400W032 UNCOATED.............................. P36
40041600T032 TIALN ....................................... P36
40041600T032 UNCOATED ............................... P36
40041600W032 TIALN ...................................... P36
40041600W032 UNCOATED.............................. P36
40041800T038 TIALN ....................................... P36
40041800T038 UNCOATED ............................... P36
40041800W038 TIALN ...................................... P36
40041800W038 UNCOATED.............................. P36
40042000T038 TIALN ....................................... P36
40042000T038 UNCOATED ............................... P36
40042000W038 TIALN ...................................... P36
40042000W038 UNCOATED.............................. P36
40100400T025 TIALN ....................................... P39
40100500T030 TIALN ....................................... P39
40100600T019 TIALN ....................................... P39
40100600T030 TIALN ....................................... P39
40100800T040 TIALN ....................................... P39
40101000T040 TIALN ....................................... P39
40101200T045 TIALN ....................................... P39
40101400T050 TIALN ....................................... P39
40101600T065 TIALN ....................................... P39
40102000T056 TIALN ....................................... P39
40110400T019 TIALN ....................................... P21
40110400T019 UNCOATED ............................... P21
40110600T028 TIALN ....................................... P21
40110600T028 UNCOATED ............................... P21
40110800T028 TIALN ....................................... P21
40110800T028 UNCOATED ............................... P21
40111000T032 TIALN ....................................... P21
40111000T032 UNCOATED ............................... P21
40111200T045 TIALN ....................................... P22
40111200T045 UNCOATED ............................... P22
40112000T075 TIALN ....................................... P22
40112000T075 UNCOATED ............................... P22
40120300T025 TIALN ....................................... P17
40120400T031 TIALN ....................................... P17
40120500T031 TIALN ....................................... P17
40120600T038 TIALN ....................................... P18
40120800T041 TIALN ....................................... P18
40121000T045 TIALN ....................................... P18
40121200T075 TIALN ....................................... P18
40121400T075 TIALN ....................................... P18
40121600T075 TIALN ....................................... P18
40121800T075 TIALN ....................................... P18
40122000T075 TIALN ....................................... P18
40140300T019 TIALN ....................................... P35
40140300T019 UNCOATED ............................... P35
40140400T019 TIALN ....................................... P35
40140500T030 TIALN ....................................... P35
40140600T028 TIALN ....................................... P35
40140600T028 UNCOATED ............................... P35
40140800T028 TIALN ....................................... P36
40140800T028 UNCOATED ............................... P36
40141000T032 TIALN ....................................... P36
40141000T032 UNCOATED ............................... P36
40141200T045 TIALN ....................................... P36
40141200T045 UNCOATED ............................... P36
40141200W045 TIALN ...................................... P36
40141200W045 UNCOATED.............................. P36
40141400T050 TIALN ....................................... P36
40141400T050 UNCOATED ............................... P36
40141400W050 TIALN ...................................... P36
40141400W050 UNCOATED.............................. P36
40141600T056 TIALN ....................................... P36
40141600T056 UNCOATED ............................... P36
40141600W056 TIALN ...................................... P36
40141600W056 UNCOATED.............................. P36
40141800T060 TIALN ....................................... P36
40141800T060 UNCOATED ............................... P36
40141800W060 TIALN ...................................... P36
Catalogue No. Page(s) Catalogue No. Page(s) Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 81 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRAND O b 28 2015 3 09 PM
Z82 widia.com
Index by Catalogue Number
Index
Catalogue No. Page(s)
40141800W060 UNCOATED.............................. P36
40142000T056 TIALN ....................................... P36
40142000T056 UNCOATED ............................... P36
40142000W056 TIALN ...................................... P36
40142000W056 UNCOATED.............................. P36
40210400T031 TIALN ....................................... P21
40210400T031 UNCOATED ............................... P21
40210500T014 TIALN ....................................... P21
40210600T038 TIALN ....................................... P21
40210600T038 UNCOATED ............................... P21
40210800T040 TIALN ....................................... P21
40210800T040 UNCOATED ............................... P21
40211000T045 TIALN ....................................... P21
40211000T045 UNCOATED ............................... P21
40211200T075 TIALN ....................................... P22
40211200T075 UNCOATED ............................... P22
40240300T025 TIALN ....................................... P35
40240300T025 UNCOATED ............................... P35
40240400T031 TIALN ....................................... P35
40240500T031 TIALN ....................................... P35
40240600T038 TIALN ....................................... P35
40240600T038 UNCOATED ............................... P35
40240800T041 TIALN ....................................... P36
40240800T041 UNCOATED ............................... P36
40241000T045 TIALN ....................................... P36
40241000T045 UNCOATED ............................... P36
40241200T075 TIALN ....................................... P36
40241200T075 UNCOATED ............................... P36
40241200W075 TIALN ...................................... P36
40241200W075 UNCOATED.............................. P36
40241400T075 TIALN ....................................... P36
40241400T075 UNCOATED ............................... P36
40241400W075 TIALN ...................................... P36
40241400W075 UNCOATED.............................. P36
40241600T075 TIALN ....................................... P36
40241600T075 UNCOATED ............................... P36
40241600W075 TIALN ...................................... P36
40241600W075 UNCOATED.............................. P36
40241800T075 TIALN ....................................... P36
40241800T075 UNCOATED ............................... P36
40241800W075 TIALN ...................................... P36
40241800W075 UNCOATED.............................. P36
40242000T075 TIALN ....................................... P36
40242000T075 UNCOATED ............................... P36
40242000W075 TIALN ...................................... P36
40242000W075 UNCOATED.............................. P36
410201000.. UNCOATED .................................O136
410201500.. UNCOATED .................................O136
410202000.. UNCOATED .................................O136
410202500.. UNCOATED .................................O136
410203000.. UNCOATED .................................O136
410204001.. UNCOATED .................................O136
410205001.. UNCOATED .................................O136
410205002.. UNCOATED .................................O136
410206002.. UNCOATED .................................O136
410208003.. UNCOATED .................................O136
410210004.. UNCOATED .................................O136
410212005.. UNCOATED .................................O136
410214014.. UNCOATED .................................O136
410216006.. UNCOATED .................................O136
410218018.. UNCOATED .................................O136
410220007.. UNCOATED .................................O136
410303000.. UNCOATED .................................O139
410303000CT TICN-CT ...................................O139
410304001.. UNCOATED .................................O139
410304001CT TICN-CT ...................................O139
410304002.. UNCOATED .................................O139
410305001.. UNCOATED .................................O139
410305001CT TICN-CT ...................................O139
410305002.. UNCOATED .................................O139
410305002CT TICN-CT ...................................O139
410306002.. UNCOATED .................................O139
410306002CT TICN-CT ...................................O139
410308003.. UNCOATED .................................O139
410308003CT TICN-CT ...................................O139
410310004.. UNCOATED .................................O139
410310004CT TICN-CT ...................................O139
410312005.. UNCOATED .................................O139
410312005CT TICN-CT ...................................O139
410314014.. UNCOATED .................................O139
410314014CT TICN-CT ...................................O139
410316006.. UNCOATED .................................O139
410316006CT TICN-CT ...................................O139
410318018.. UNCOATED .................................O139
410318018CT TICN-CT ...................................O139
410320007.. UNCOATED .................................O139
410320007CT TICN-CT ...................................O139
422150-000060 K30F-DCHP ............................ O56
422150-000080 K30F-DCHP ............................ O56
422150-000100 K30F-DCHP ............................ O56
422150-000120 K30F-DCHP ............................ O56
422150-000160 K30F-DCHP ............................ O56
422150-000200 K30F-DCHP ............................ O56
422150-000250 K30F-DCHP ............................ O56
422152-000060 K30F-DCHP ............................ O56
422152-000080 K30F-DCHP ............................ O56
422152-000100 K30F-DCHP ............................ O56
422152-000120 K30F-DCHP ............................ O56
422152-000160 K30F-DCHP ............................ O56
422152-000200 K30F-DCHP ............................ O56
422152-000250 K30F-DCHP ............................ O56
422801-000020 K30F-DCF...............................O89
422801-000025 K30F-DCF...............................O89
422801-000030 K30F-DCF...............................O89
422801-000035 K30F-DCF...............................O89
422801-000040 K30F-DCF...............................O90
422801-000045 K30F-DCF...............................O90
422801-000050 K30F-DCF...............................O90
422801-000060 K30F-DCF...............................O90
422801-000070 K30F-DCF...............................O90
422801-000080 K30F-DCF...............................O90
422801-000090 K30F-DCF...............................O90
422801-000100 K30F-DCF...............................O90
422801-000120 K30F-DCF...............................O90
422801-000140 K30F-DCF...............................O90
422801-000160 K30F-DCF...............................O90
422801-000180 K30F-DCF...............................O90
422801-000200 K30F-DCF...............................O90
422802-000020 K30F-DCF...............................O89
422802-000025 K30F-DCF...............................O89
422802-000030 K30F-DCF...............................O89
422802-000035 K30F-DCF...............................O89
422802-000040 K30F-DCF...............................O90
422802-000045 K30F-DCF...............................O90
422802-000050 K30F-DCF...............................O90
422802-000060 K30F-DCF...............................O90
422802-000070 K30F-DCF...............................O90
422802-000080 K30F-DCF...............................O90
422802-000090 K30F-DCF...............................O90
422802-000100 K30F-DCF...............................O90
422802-000120 K30F-DCF...............................O90
422802-000140 K30F-DCF...............................O90
422802-000160 K30F-DCF...............................O90
422802-000180 K30F-DCF...............................O90
422802-000200 K30F-DCF...............................O90
422804-000020 K30F-DCF...............................O89
422804-000025 K30F-DCF...............................O89
422804-000030 K30F-DCF...............................O89
422804-000035 K30F-DCF...............................O89
422804-000040 K30F-DCF...............................O90
422804-000045 K30F-DCF...............................O90
422804-000050 K30F-DCF...............................O90
422804-000060 K30F-DCF...............................O90
422804-000070 K30F-DCF...............................O90
422804-000080 K30F-DCF...............................O90
422804-000090 K30F-DCF...............................O90
422804-000100 K30F-DCF...............................O90
422804-000120 K30F-DCF...............................O90
422804-000140 K30F-DCF...............................O90
422804-000160 K30F-DCF...............................O90
422804-000180 K30F-DCF...............................O90
422804-000200 K30F-DCF...............................O90
422806-000020 K30F-DCF...............................O89
422806-000025 K30F-DCF...............................O89
422806-000030 K30F-DCF...............................O89
422806-000035 K30F-DCF...............................O89
422806-000040 K30F-DCF...............................O90
422806-000045 K30F-DCF...............................O90
422806-000050 K30F-DCF...............................O90
422806-000060 K30F-DCF...............................O90
422806-000070 K30F-DCF...............................O90
422806-000080 K30F-DCF...............................O90
422806-000090 K30F-DCF...............................O90
422806-000100 K30F-DCF...............................O90
422806-000120 K30F-DCF...............................O90
422806-000140 K30F-DCF...............................O90
422806-000160 K30F-DCF...............................O90
422806-000180 K30F-DCF...............................O90
422806-000200 K30F-DCF...............................O90
422813-000060 K30F-DCF...............................O63
422813-000080 K30F-DCF...............................O63
422813-000100 K30F-DCF...............................O63
422813-000120 K30F-DCF...............................O63
422813-000160 K30F-DCF...............................O63
422813-000200 K30F-DCF...............................O63
422813-000250 K30F-DCF...............................O63
422818-000060 K30F-DCF...............................O64
422818-000080 K30F-DCF...............................O64
422818-000100 K30F-DCF...............................O64
422818-000120 K30F-DCF...............................O64
422818-000160 K30F-DCF...............................O64
422818-000200 K30F-DCF...............................O64
422820-000060 K30F-DCHP ............................ O58
422820-000080 K30F-DCHP ............................ O58
422820-000100 K30F-DCHP ............................ O58
422820-000120 K30F-DCHP ............................ O58
422820-000160 K30F-DCHP ............................ O58
422820-000200 K30F-DCHP ............................ O58
422820-000250 K30F-DCHP ............................ O58
422822-000060 K30F-DCHP ............................ O93
422822-000080 K30F-DCHP ............................ O93
422822-000100 K30F-DCHP ............................ O93
422822-000120 K30F-DCHP ............................ O93
422822-000160 K30F-DCHP ............................ O93
422822-000180 K30F-DCHP ............................ O93
422822-000200 K30F-DCHP ............................ O93
422822-000250 K30F-DCHP ............................ O93
422824-000060 K30F-DCHP ............................ O58
422824-000080 K30F-DCHP ............................ O58
422824-000100 K30F-DCHP ............................ O58
422824-000120 K30F-DCHP ............................ O58
422824-000160 K30F-DCHP ............................ O58
422824-000200 K30F-DCHP ............................ O58
422824-000250 K30F-DCHP ............................ O58
422826-000060 K30F-DCHP ............................ O93
422826-000080 K30F-DCHP ............................ O93
422826-000100 K30F-DCHP ............................ O93
422826-000120 K30F-DCHP ............................ O93
422826-000160 K30F-DCHP ............................ O93
422826-000180 K30F-DCHP ............................ O93
422826-000200 K30F-DCHP ............................ O93
422826-000250 K30F-DCHP ............................ O93
422827-000060 K30F-DCHP ............................ O94
422827-000080 K30F-DCHP ............................ O94
422827-000100 K30F-DCHP ............................ O94
422827-000120 K30F-DCHP ............................ O94
422827-000160 K30F-DCHP ............................ O94
422827-000200 K30F-DCHP ............................ O94
422827-000250 K30F-DCHP ............................ O94
422831-006005 K10UF-DCHP ........................O192
422831-008005 K10UF-DCHP ........................O192
422831-010005 K10UF-DCHP ........................O192
422831-012005 K10UF-DCHP ........................O192
422831-012010 K10UF-DCHP ........................O192
422831-016005 K10UF-DCHP ........................O192
422831-016010 K10UF-DCHP ........................O192
422831-020010 K10UF-DCHP ........................O192
422831-025015 K10UF-DCHP ........................O192
422837-006005 K10UF-DCHP ........................O192
422837-008005 K10UF-DCHP ........................O192
422837-010005 K10UF-DCHP ........................O192
422837-012005 K10UF-DCHP ........................O192
422837-012010 K10UF-DCHP ........................O192
422837-016005 K10UF-DCHP ........................O192
422837-016010 K10UF-DCHP ........................O192
422837-020005 K10UF-DCHP ........................O192
422837-020010 K10UF-DCHP ........................O192
422837-025005 K10UF-DCHP ........................O192
422846-000060 K30F-DCF...............................O65
422846-000080 K30F-DCF...............................O65
422846-000100 K30F-DCF...............................O65
422846-000120 K30F-DCF...............................O65
422846-000160 K30F-DCF...............................O65
422846-000200 K30F-DCF...............................O65
422846-000250 K30F-DCF...............................O65
422868-000060 K10UF-DCHP ........................O177
422868-000080 K10UF-DCHP ........................O177
422868-000100 K10UF-DCHP ........................O177
422869-000010 K10UF-DCHP ........................O177
422869-000020 K10UF-DCHP ........................O177
422869-000030 K10UF-DCHP ........................O177
422869-000040 K10UF-DCHP ........................O177
422869-000050 K10UF-DCHP ........................O177
422869-000060 K10UF-DCHP ........................O177
422869-000080 K10UF-DCHP ........................O177
422869-000100 K10UF-DCHP ........................O177
422869-000120 K10UF-DCHP ........................O177
422869-000160 K10UF-DCHP ........................O177
422870-000020 K10UF-DCHP ........................O178
422870-000030 K10UF-DCHP ........................O178
422870-000040 K10UF-DCHP ........................O178
422870-000050 K10UF-DCHP ........................O178
422870-000060 K10UF-DCHP ........................O178
422870-000080 K10UF-DCHP ........................O178
422870-000100 K10UF-DCHP ........................O178
422870-000120 K10UF-DCHP ........................ O178
422871-030075 K10UF-DCHP ........................O190
422871-030100 K10UF-DCHP ........................O190
422871-040075 K10UF-DCHP ........................O190
422871-040100 K10UF-DCHP ........................O190
422871-050075 K10UF-DCHP ........................O190
422871-050100 K10UF-DCHP ........................O190
Catalogue No. Page(s) Catalogue No. Page(s) Catalogue No. Page(s)
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 82 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRANDO b 28 20153 09PM
Z83
widia.com
Index by Catalogue Number
Catalogue No. Page(s)
422871-060075 K10UF-DCHP ........................O190
422871-060100 K10UF-DCHP ........................O190
422871-080100 K10UF-DCHP ........................O190
422871-080150 K10UF-DCHP ........................O190
422871-100100 K10UF-DCHP ........................O190
422871-100150 K10UF-DCHP ........................O190
422873-050100 K10UF-DCHP ........................O179
422873-060100 K10UF-DCHP ........................O179
422873-100100 K10UF-DCHP ........................O179
422873-100150 K10UF-DCHP ........................O179
422875-002003 K10UF-DCHP ........................O173
422875-002005 K10UF-DCHP ........................O173
422875-003005 K10UF-DCHP ........................O173
422875-003010 K10UF-DCHP ........................O173
422875-004005 K10UF-DCHP ........................O173
422875-004010 K10UF-DCHP ........................O173
422875-005005 K10UF-DCHP ........................O173
422875-005010 K10UF-DCHP ........................O173
422875-006005 K10UF-DCHP ........................O173
422875-006010 K10UF-DCHP ........................O173
422875-008005 K10UF-DCHP ........................O173
422875-008010 K10UF-DCHP ........................O173
422875-008015 K10UF-DCHP ........................O173
422875-008020 K10UF-DCHP ........................O173
422875-010005 K10UF-DCHP ........................O173
422875-010010 K10UF-DCHP ........................O173
422875-010015 K10UF-DCHP ........................O173
422875-010020 K10UF-DCHP ........................O173
422875-010030 K10UF-DCHP ........................O173
422875-012005 K10UF-DCHP ........................O173
422875-012010 K10UF-DCHP ........................O173
422875-012030 K10UF-DCHP ........................O173
422875-012040 K10UF-DCHP ........................O173
422876-004005 K10UF-DCHP ........................O187
422876-004010 K10UF-DCHP ........................O187
422876-005005 K10UF-DCHP ........................O187
422876-005010 K10UF-DCHP ........................O187
422876-006005 K10UF-DCHP ........................O187
422876-006010 K10UF-DCHP ........................O187
422876-008005 K10UF-DCHP ........................O187
422876-008010 K10UF-DCHP ........................O187
422876-008020 K10UF-DCHP ........................O187
422876-010005 K10UF-DCHP ........................O187
422876-010010 K10UF-DCHP ........................O187
422876-010020 K10UF-DCHP ........................O187
422876-012005 K10UF-DCHP ........................O187
422876-012010 K10UF-DCHP ........................O187
422876-012020 K10UF-DCHP ........................O187
422876-012030 K10UF-DCHP ........................O187
422878-006005 K10UF-DCHP ........................O187
422878-008010 K10UF-DCHP ........................O187
422878-008015 K10UF-DCHP ........................O187
422878-008020 K10UF-DCHP ........................O187
422878-010005 K10UF-DCHP ........................O187
422878-010010 K10UF-DCHP ........................O187
422878-010020 K10UF-DCHP ........................O187
422878-012010 K10UF-DCHP ........................O187
422878-012030 K10UF-DCHP ........................O187
423001-000020 K30F-DCF..................................P4
423001-000030 K30F-DCF..................................P4
423001-000040 K30F-DCF..................................P4
423001-000050 K30F-DCF..................................P4
423001-000060 K30F-DCF..................................P4
423001-000080 K30F-DCF..................................P4
423001-000100 K30F-DCF..................................P4
423001-000120 K30F-DCF..................................P4
423002-000020 K30F-DCF..................................P4
423002-000030 K30F-DCF..................................P4
423002-000040 K30F-DCF..................................P4
423002-000050 K30F-DCF..................................P4
423002-000060 K30F-DCF..................................P4
423002-000080 K30F-DCF..................................P4
423002-000100 K30F-DCF..................................P4
423002-000120 K30F-DCF..................................P4
423003-000040 K30F-DCHP ...............................P5
423003-000060 K30F-DCHP ...............................P5
423003-000080 K30F-DCHP ...............................P5
423003-000100 K30F-DCHP ...............................P5
423003-000120 K30F-DCHP ...............................P5
423004-000040 K30F-DCHP ...............................P5
423004-000060 K30F-DCHP ...............................P5
423004-000080 K30F-DCHP ...............................P5
423004-000100 K30F-DCHP ...............................P5
423004-000120 K30F-DCHP ...............................P5
423007-000004 K30F-DCHP .......................... O116
423007-000005 K30F-DCHP .......................... O116
423007-000006 K30F-DCHP .......................... O116
423007-000008 K30F-DCHP .......................... O116
423007-000010 K30F-DCHP .......................... O116
423007-000012 K30F-DCHP .......................... O116
423007-000015 K30F-DCHP .......................... O116
423007-000018 K30F-DCHP .......................... O116
423007-000020 K30F-DCHP .......................... O116
423007-000025 K30F-DCHP .......................... O116
423007-000030 K30F-DCHP .......................... O116
423034-000005 K10UF-DCHP ........................O164
423034-000006 K10UF-DCHP ........................O164
423034-000008 K10UF-DCHP ........................O164
423034-000010 K10UF-DCHP ........................O164
423034-000012 K10UF-DCHP ........................O164
423034-000015 K10UF-DCHP ........................O164
423034-000020 K10UF-DCHP ........................O164
423034-000025 K10UF-DCHP ........................O164
423034-000030 K10UF-DCHP ........................O164
423036-000060 K30F-DCF..................................P8
423036-000080 K30F-DCF..................................P8
423036-000100 K30F-DCF..................................P8
423037-000060 K30F-DCHP ...............................P8
423037-000080 K30F-DCHP ...............................P8
423037-000100 K30F-DCHP ...............................P8
423038-000020 K30F-DCHP ...............................P7
423038-000030 K30F-DCHP ...............................P7
423038-000040 K30F-DCHP ...............................P7
423038-000050 K30F-DCHP ...............................P7
423038-000060 K30F-DCHP ...............................P7
423038-000080 K30F-DCHP ...............................P7
423038-000100 K30F-DCHP ...............................P7
423038-000120 K30F-DCHP ...............................P7
423039-000020 K30F-DCHP ...............................P7
423039-000030 K30F-DCHP ...............................P7
423039-000040 K30F-DCHP ...............................P7
423039-000050 K30F-DCHP ...............................P7
423039-000060 K30F-DCHP ...............................P7
423039-000080 K30F-DCHP ...............................P7
423039-000100 K30F-DCHP ...............................P7
423039-000120 K30F-DCHP ...............................P7
423047-000020 K30F-DCHP ...............................P6
423047-000030 K30F-DCHP ...............................P6
423047-000040 K30F-DCHP ...............................P6
423047-000050 K30F-DCHP ...............................P6
423047-000060 K30F-DCHP ...............................P6
423047-000080 K30F-DCHP ...............................P6
423047-000100 K30F-DCHP ...............................P6
423047-000120 K30F-DCHP ...............................P6
423048-000020 K30F-DCHP ...............................P6
423048-000030 K30F-DCHP ...............................P6
423048-000040 K30F-DCHP ...............................P6
423048-000050 K30F-DCHP ...............................P6
423048-000060 K30F-DCHP ...............................P6
423048-000080 K30F-DCHP ...............................P6
423048-000100 K30F-DCHP ...............................P6
423048-000120 K30F-DCHP ...............................P6
446101 W ..........................................................E33
446102 W ..........................................................E33
446103 W ..........................................................E33
446104 W ................................................... E33–34
450222-000200 K10F-DCFD ........................... W13
450222-000300 K10F-DCFD ........................... W13
450222-000400 K10F-DCFD ........................... W13
450227-000200 K10F-DCFD ............................. W9
450227-000300 K10F-DCFD ............................. W9
450227-000400 K10F-DCFD ............................. W9
450227-000500 K10F-DCFD ............................. W9
450227-000600 K10F-DCFD ............................. W9
450227-000800 K10F-DCFD ............................. W9
450227-001000 K10F-DCFD ............................. W9
450227-001200 K10F-DCFD ............................. W9
450227-001400 K10F-DCFD ............................. W9
450270-000500 K10F-DCFD ........................... W14
450270-000600 K10F-DCFD ........................... W14
450270-000800 K10F-DCFD ........................... W14
450270-001000 K10F-DCFD ........................... W14
450270-001200 K10F-DCFD ........................... W14
450270-001400 K10F-DCFD ........................... W14
450271-000500 K10F-DCFD ........................... W10
450271-000600 K10F-DCFD ........................... W10
450271-000800 K10F-DCFD ........................... W10
450271-001000 K10F-DCFD ........................... W10
450271-001200 K10F-DCFD ........................... W10
450271-001400 K10F-DCFD ........................... W10
450280-001400 K10F-DCFD ........................... W15
450280-001600 K10F-DCFD ........................... W15
450280-001800 K10F-DCFD ........................... W15
450280-002000 K10F-DCFD ........................... W15
450280-002200 K10F-DCFD ........................... W15
450280-002400 K10F-DCFD ........................... W15
450280-002500 K10F-DCFD ........................... W15
450280-002600 K10F-DCFD ........................... W15
450280-002800 K10F-DCFD ........................... W15
450280-003000 K10F-DCFD ........................... W15
450280-003200 K10F-DCFD ........................... W15
450281-001400 K10F-DCFD ........................... W11
450281-001600 K10F-DCFD ........................... W11
450281-001800 K10F-DCFD ........................... W11
450281-002000 K10F-DCFD ........................... W11
450281-002200 K10F-DCFD ........................... W11
450281-002400 K10F-DCFD ........................... W11
450281-002500 K10F-DCFD ........................... W11
450281-002600 K10F-DCFD ........................... W11
450281-002800 K10F-DCFD ........................... W11
450281-003000 K10F-DCFD ........................... W11
450281-003200 K10F-DCFD ........................... W11
450301001T WP15PE ....................................... O87
450301501T WP15PE ....................................... O87
450302001T WP15PE ....................................... O87
450302501T WP15PE ....................................... O87
450302511T WP15PE ....................................... O87
450303002T WP15PE ....................................... O87
450303502T WP15PE ....................................... O87
450304002T WP15PE ....................................... O87
450304502T WP15PE ....................................... O87
450305002T WP15PE ....................................... O87
450306002T WP15PE ....................................... O87
450308003T WP15PE ....................................... O87
450310004T WP15PE ....................................... O87
450312005T WP15PE ....................................... O87
450316006T WP15PE ....................................... O87
450320007T WP15PE ....................................... O87
456680-001400 CERMETDCFD........................ W16
456680-001500 CERMETDCFD........................ W16
456680-001600 CERMETDCFD........................ W16
456680-001700 CERMETDCFD........................ W16
456680-001800 CERMETDCFD........................ W16
456680-001900 CERMETDCFD........................ W16
456680-002000 CERMETDCFD........................ W16
456681-001400 CERMETDCFD........................ W12
456681-001500 CERMETDCFD........................ W12
456681-001600 CERMETDCFD........................ W12
456681-001700 CERMETDCFD........................ W12
456681-001800 CERMETDCFD........................ W12
456681-001900 CERMETDCFD........................ W12
456681-002000 CERMETDCFD........................ W12
460303002RT TIALN-RT .................................... O91
460304002RT TIALN-RT .................................... O91
460305002RT TIALN-RT .................................... O91
460306002.. UNCOATED ................................... O91
460306002RT TIALN-RT .................................... O91
460308003RT TIALN-RT .................................... O91
460310004.. UNCOATED ................................... O91
460310004RT TIALN-RT .................................... O91
460312005RT TIALN-RT .................................... O91
460316006RT TIALN-RT .................................... O91
460320007RT TIALN-RT .................................... O91
463200400.. UNCOATED .................................O117
463200400RT TIALN-RT ..................................O117
463200500.. UNCOATED .................................O117
463200500RT TIALN-RT ..................................O117
463200600.. UNCOATED .................................O117
463200600RT TIALN-RT ..................................O117
463200800.. UNCOATED .................................O117
463200800RT TIALN-RT ..................................O117
463201000.. UNCOATED .................................O117
463201000RT TIALN-RT ..................................O117
463201500.. UNCOATED .................................O117
463201500RT TIALN-RT ..................................O117
463202000.. UNCOATED .................................O117
463300400.. UNCOATED .................................O118
463300400RT TIALN-RT ..................................O118
463300500.. UNCOATED .................................O118
463300500RT TIALN-RT ..................................O118
463300600.. UNCOATED .................................O118
463300600RT TIALN-RT ..................................O118
463300800.. UNCOATED .................................O118
463300800RT TIALN-RT ..................................O118
463301000.. UNCOATED .................................O118
463301000RT TIALN-RT ..................................O118
463301200.. UNCOATED .................................O118
463301200RT TIALN-RT ..................................O118
463301500.. UNCOATED .................................O118
463301500RT TIALN-RT ..................................O118
463301800.. UNCOATED .................................O118
463301800RT TIALN-RT ..................................O118
463302000.. UNCOATED .................................O118
463302000RT TIALN-RT ..................................O118
463302500RT TIALN-RT ..................................O118
463303000RT TIALN-RT .................................. O118
465101000.. UNCOATED .................................O119
465101000CT TICN-CT ...................................O119
465101000RT TIALN-RT ..................................O119
465101200.. UNCOATED .................................O119
465101200CT TICN-CT ...................................O119
465101200RT TIALN-RT ..................................O119
Catalogue No. Page(s) Catalogue No. Page(s) Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 83 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRAND O b 28 2015 3 09 PM
Z84 widia.com
Index by Catalogue Number
Index
Catalogue No. Page(s)
465101500.. UNCOATED .................................O119
465101500CT TICN-CT ...................................O119
465101500RT TIALN-RT ..................................O119
465101800CT TICN-CT ...................................O119
465101800RT TIALN-RT ..................................O119
465102000.. UNCOATED .................................O119
465102000CT TICN-CT ...................................O119
465102000RT TIALN-RT ..................................O119
471706002LW TIALN-LW .................................... O7
471708003LW TIALN-LW .................................... O7
471710004LW TIALN-LW .................................... O7
471712005LW TIALN-LW .................................... O7
471716006LW TIALN-LW .................................... O7
471720007LW TIALN-LW .................................... O7
472712005LW TIALN-LW .................................... O8
472716006LW TIALN-LW .................................... O8
472720007LW TIALN-LW .................................... O8
477704001T WP15PE ......................................... O4
477704002T WP15PE ......................................... O4
477704002W WP15PE ........................................ O4
4777040Z2T WP15PE ......................................... O4
477705002T WP15PE ......................................... O4
477705002W WP15PE ........................................ O4
477705012T WP15PE ......................................... O4
4777050Z2T WP15PE ......................................... O4
477706002T WP15PE ......................................... O4
477706002W WP15PE ........................................ O4
477706012T WP15PE ......................................... O4
4777060Z2T WP15PE ......................................... O4
477707003T WP15PE ......................................... O4
477707003W WP15PE ........................................ O4
477707013T WP15PE ......................................... O4
4777070Z3T WP15PE ......................................... O4
477708003T WP15PE ......................................... O4
477708003W WP15PE ........................................ O4
477708013T WP15PE ......................................... O4
4777080Z3T WP15PE ......................................... O4
477709004T WP15PE ......................................... O4
477709004W WP15PE ........................................ O4
477709014T WP15PE ......................................... O4
4777090Z4T WP15PE ......................................... O4
477710004T WP15PE ......................................... O4
477710004W WP15PE ........................................ O4
477710024T WP15PE ......................................... O4
4777100Z4T WP15PE ......................................... O5
4777110Z5T WP15PE ......................................... O5
477712005T WP15PE ......................................... O5
477712005W WP15PE ........................................ O5
477712025T WP15PE ......................................... O5
4777120Z5T WP15PE ......................................... O5
477714014W WP15PE ........................................ O5
477714015T WP15PE ......................................... O5
477716006T WP15PE ......................................... O5
477716006W WP15PE ........................................ O5
477716026T WP15PE ......................................... O5
4777160Z6T WP15PE ......................................... O5
477718018T WP15PE ......................................... O5
477718018W WP15PE ........................................ O5
477720007T WP15PE ......................................... O5
477720007W WP15PE ........................................ O5
47772002T WP15PE ........................................... O5
477725008T WP15PE ......................................... O5
477725008W WP15PE ........................................ O5
477804002MT ALTIN-MT .................................... O6
477804002MW ALTIN-MW .................................. O6
477805002MT ALTIN-MT .................................... O6
477805002MW ALTIN-MW .................................. O6
477806002MT ALTIN-MT .................................... O6
477806002MW ALTIN-MW .................................. O6
477807003MT ALTIN-MT .................................... O6
477807003MW ALTIN-MW .................................. O6
477808003MT ALTIN-MT .................................... O6
477808003MW ALTIN-MW .................................. O6
477809004MT ALTIN-MT .................................... O6
477809004MW ALTIN-MW .................................. O6
477810004MT ALTIN-MT .................................... O6
477810004MW ALTIN-MW .................................. O6
477812005MT ALTIN-MT .................................... O6
477812005MW ALTIN-MW .................................. O6
477814014MT ALTIN-MT .................................... O6
477814014MW ALTIN-MW .................................. O6
477816006MT ALTIN-MT .................................... O6
477816006MW ALTIN-MW .................................. O6
477818018MT ALTIN-MT .................................... O6
477818018MW ALTIN-MW .................................. O6
477820007MT ALTIN-MT .................................... O6
477820007MW ALTIN-MW .................................. O6
477825008MT ALTIN-MT .................................... O6
477825008MW ALTIN-MW .................................. O6
47N005002T WP15PE ....................................... O12
47N006002T WP15PE ....................................... O12
47N008003T WP15PE ....................................... O12
47N010004T WP15PE ....................................... O12
47N012005T WP15PE ....................................... O12
47N016006T WP15PE ....................................... O12
47N020007T WP15PE ....................................... O12
47N606002LW TIALN-LW ..................................O11
47N608003LW TIALN-LW ..................................O11
47N610004LW TIALN-LW ..................................O11
47N612005LW TIALN-LW ..................................O11
47N616006LW TIALN-LW ..................................O11
47N620007LW TIALN-LW ..................................O11
47N704002LT TIALN-LT ....................................... O9
47N704012LT TIALN-LT ....................................... O9
47N704012MT ALTIN-MT .................................... O9
47N704022LT TIALN-LT ....................................... O9
47N705002LT TIALN-LT ....................................... O9
47N705012LT TIALN-LT ....................................... O9
47N705012MT ALTIN-MT .................................... O9
47N706002LT TIALN-LT ....................................... O9
47N706002MT ALTIN-MT .................................... O9
47N706012LT TIALN-LT ....................................... O9
47N706012MT ALTIN-MT .................................... O9
47N706022LT TIALN-LT ....................................... O9
47N708003LT TIALN-LT ....................................... O9
47N708003MT ALTIN-MT .................................... O9
47N708013LT TIALN-LT ....................................... O9
47N708013MT ALTIN-MT .................................... O9
47N708023LT TIALN-LT ....................................... O9
47N708033LT TIALN-LT ....................................... O9
47N710004LT TIALN-LT ....................................... O9
47N710004MT ALTIN-MT .................................... O9
47N710014LT TIALN-LT ....................................... O9
47N710014MT ALTIN-MT .................................... O9
47N710024LT TIALN-LT ....................................... O9
47N710034LT TIALN-LT ....................................... O9
47N710034MT ALTIN-MT .................................... O9
47N712005LT TIALN-LT ....................................... O9
47N712005MT ALTIN-MT .................................... O9
47N712015LT TIALN-LT ....................................... O9
47N712015MT ALTIN-MT .................................... O9
47N712025LT TIALN-LT ....................................... O9
47N712035LT TIALN-LT ....................................... O9
47N712035MT ALTIN-MT .................................... O9
47N712045LT TIALN-LT ..................................... O10
47N712045MT ALTIN-MT .................................. O10
47N716006LT TIALN-LT ..................................... O10
47N716006MT ALTIN-MT .................................. O10
47N716016LT TIALN-LT ..................................... O10
47N716016MT ALTIN-MT .................................. O10
47N716026LT TIALN-LT ..................................... O10
47N716026MT ALTIN-MT .................................. O10
47N720007LT TIALN-LT ..................................... O10
47N720007MT ALTIN-MT .................................. O10
47N720017LT TIALN-LT ..................................... O10
47N720017MT ALTIN-MT .................................. O10
47N720027LT TIALN-LT ..................................... O10
47N720027MT ALTIN-MT .................................. O10
490604002CW TICN-CW ...................................O66
490604002LW TIALN-LW .................................. O66
490604002RT TIALN-RT .................................... O66
490604002RW TIALN-RW ................................. O66
490605002CW TICN-CW ...................................O66
490605002LW TIALN-LW .................................. O66
490605002RT TIALN-RT .................................... O66
490605002RW TIALN-RW ................................. O66
490606002CW TICN-CW ...................................O66
490606002LW TIALN-LW .................................. O66
490606002RT TIALN-RT .................................... O66
490606002RW TIALN-RW ................................. O66
490607003CW TICN-CW ...................................O66
490607003LW TIALN-LW .................................. O66
490607003RT TIALN-RT .................................... O66
490607003RW TIALN-RW ................................. O66
490608003CW TICN-CW ...................................O66
490608003LW TIALN-LW .................................. O66
490608003RT TIALN-RT .................................... O66
490608003RW TIALN-RW ................................. O66
490609004CW TICN-CW ...................................O66
490609004LW TIALN-LW .................................. O66
490609004RT TIALN-RT .................................... O66
490609004RW TIALN-RW ................................. O66
490610004CW TICN-CW ...................................O66
490610004LW TIALN-LW .................................. O66
490610004RT TIALN-RT .................................... O66
490610004RW TIALN-RW ................................. O66
490611005CW TICN-CW ...................................O66
490611005LW TIALN-LW .................................. O66
490611005RT TIALN-RT .................................... O66
490611005RW TIALN-RW ................................. O66
490612005CW TICN-CW ...................................O66
490612005LW TIALN-LW .................................. O66
490612005RT TIALN-RT .................................... O66
490612005RW TIALN-RW ................................. O66
490613014CW TICN-CW ...................................O66
490613014LW TIALN-LW .................................. O66
490613014RT TIALN-RT .................................... O66
490613014RW TIALN-RW ................................. O66
490614014CW TICN-CW ...................................O66
490614014LW TIALN-LW .................................. O66
490614014RT TIALN-RT .................................... O66
490614014RW TIALN-RW ................................. O66
490616006CW TICN-CW ...................................O66
490616006LW TIALN-LW .................................. O66
490616006RT TIALN-RT .................................... O66
490616006RW TIALN-RW ................................. O66
490618018CW TICN-CW ...................................O66
490618018LW TIALN-LW .................................. O66
490618018RT TIALN-RT .................................... O66
490618018RW TIALN-RW ................................. O66
490620007CW TICN-CW ...................................O66
490620007LW TIALN-LW .................................. O66
490620007RT TIALN-RT .................................... O66
490620007RW TIALN-RW ................................. O66
490625008CW TICN-CW ...................................O66
490625008LW TIALN-LW .................................. O66
490625008RT TIALN-RT .................................... O66
490625008RW TIALN-RW ................................. O66
490906002.. UNCOATED .................................O140
490906002WW UNCOATEDWW ......................O140
490908003.. UNCOATED .................................O140
490908003WW UNCOATEDWW ......................O140
490910004.. UNCOATED .................................O140
490910004WW UNCOATEDWW ......................O140
490912005.. UNCOATED .................................O140
490912005WW UNCOATEDWW ......................O140
490914014.. UNCOATED .................................O140
490914014WW UNCOATEDWW ......................O140
490916006.. UNCOATED .................................O140
490916006WW UNCOATEDWW ......................O140
490918018.. UNCOATED .................................O140
490918018WW UNCOATEDWW ......................O140
490920007.. UNCOATED .................................O140
490920007WW UNCOATEDWW ......................O140
490925008.. UNCOATED .................................O140
490925008WW UNCOATEDWW ......................O140
496605002CW TICN-CW ...................................O67
496605002LW TIALN-LW .................................. O67
496605002RW TIALN-RW ................................. O67
496606002CW TICN-CW ...................................O67
496606002LW TIALN-LW .................................. O67
496606002RW TIALN-RW ................................. O67
496608003CW TICN-CW ...................................O67
496608003LW TIALN-LW .................................. O67
496608003RW TIALN-RW ................................. O67
496610004CW TICN-CW ...................................O67
496610004LW TIALN-LW .................................. O67
496610004RW TIALN-RW ................................. O67
496612005CW TICN-CW ...................................O67
496612005LW TIALN-LW .................................. O67
496612005RW TIALN-RW ................................. O67
496614014LW TIALN-LW .................................. O67
496614014RW TIALN-RW ................................. O67
496616006CW TICN-CW ...................................O67
496616006LW TIALN-LW .................................. O67
496616006RW TIALN-RW ................................. O67
496618018CW TICN-CW ...................................O67
496620007CW TICN-CW ...................................O67
496620007RW TIALN-RW ................................. O67
496625008CW TICN-CW ...................................O67
496625008RW TIALN-RW ................................. O67
496905002LW TIALN-LW .................................. O62
496906002LW TIALN-LW .................................. O62
496908003LW TIALN-LW .................................. O62
496910004LW TIALN-LW .................................. O62
496912005LW TIALN-LW .................................. O62
496914014LW TIALN-LW .................................. O62
496916006LW TIALN-LW .................................. O62
496918018LW TIALN-LW .................................. O62
496920007LW TIALN-LW .................................. O62
497604002T WP15PE ....................................... O57
497605002T WP15PE ....................................... O57
497606002T WP15PE ....................................... O57
497608003T WP15PE ....................................... O57
497610004T WP15PE ....................................... O57
497612005T WP15PE ....................................... O57
497614014T WP15PE ....................................... O57
497616006T WP15PE ....................................... O57
497618018T WP15PE ....................................... O57
497620007T WP15PE ....................................... O57
497625008T WP15PE ....................................... O57
497906002.. UNCOATED .................................O141
Catalogue No. Page(s) Catalogue No. Page(s) Catalogue No. Page(s)
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 84 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRANDO b 28 20153 09PM
Z85
widia.com
Index by Catalogue Number
Catalogue No. Page(s)
497906002CT TICN-CT ...................................O141
497908003.. UNCOATED .................................O141
497908003CT TICN-CT ...................................O141
497910004.. UNCOATED .................................O141
497910004CT TICN-CT ...................................O141
497912005.. UNCOATED .................................O141
497912005CT TICN-CT ...................................O141
497916006.. UNCOATED .................................O141
497916006CT TICN-CT ...................................O141
497920007.. UNCOATED .................................O141
497920007CT TICN-CT ...................................O141
497925008.. UNCOATED .................................O141
497925008CT TICN-CT ...................................O141
49G908003CT TICN-CT ................................... O143
49G908003CW TICN-CW ................................ O143
49G910004CT TICN-CT ................................... O143
49G910004CW TICN-CW ................................ O143
49G912005CT TICN-CT ................................... O143
49G912005CW TICN-CW ................................ O143
49G916006CT TICN-CT ................................... O143
49G916006CW TICN-CW ................................ O143
49G920007CT TICN-CT ................................... O143
49G920007CW TICN-CW ................................ O143
49G925008CT TICN-CT ................................... O143
49G925008CW TICN-CW ................................ O143
49H608003LW TIALN-LW .................................. O55
49H608003RW TIALN-RW ................................. O55
49H610004LW TIALN-LW .................................. O55
49H610004RW TIALN-RW ................................. O55
49H612005RW TIALN-RW ................................. O55
49H614014LW TIALN-LW .................................. O55
49H616006LW TIALN-LW .................................. O55
49H616006RW TIALN-RW ................................. O55
49H618018LW TIALN-LW .................................. O55
49H618018RW TIALN-RW ................................. O55
49H620007LW TIALN-LW .................................. O55
49H620007RW TIALN-RW ................................. O55
49N604002MW ALTIN-MW ................................ O61
49N605002MW ALTIN-MW ................................ O61
49N606002MW ALTIN-MW ................................ O61
49N608003MW ALTIN-MW ................................ O61
49N610004MW ALTIN-MW ................................ O61
49N612005MW ALTIN-MW ................................ O61
49N614014MW ALTIN-MW ................................ O61
49N616006MW ALTIN-MW ................................ O61
49N618018MW ALTIN-MW ................................ O61
49N620007MW ALTIN-MW ................................ O61
49N625008MW ALTIN-MW ................................ O61
49N906002.. UNCOATED .................................O142
49N908003.. UNCOATED .................................O142
49N910004.. UNCOATED .................................O142
49N912005.. UNCOATED .................................O142
49N916006.. UNCOATED .................................O142
49N920007.. UNCOATED .................................O142
4EL40ISO TN6025 ..............................................F50
4EL4TR TN6025 .................................................F67
4EL50ISO TN6025 ..............................................F50
4ER35ISO TN6025 ..............................................F48
4ER40ISO TN6025 ..............................................F48
4ER45ISO TN6025 ..............................................F48
4ER4TR TN6025 .................................................F67
4ER50ISO TN6025 ..............................................F49
4ER5TR TN6025 .................................................F67
4ER6RD TN6025.................................................F65
4ER6W TN6025 ..................................................F62
4ERN55 TN6025 .................................................F60
4ERN60 TN6025 .................................................F46
4IL40ISO TN6025 ...............................................F53
4IL45ISO TN6025 ...............................................F53
4IL50ISO TN6025 ...............................................F53
4ILN60 TN6025 ..................................................F47
4IR35ISO TN6025 ...............................................F51
4IR40ISO TN6025 ...............................................F52
4IR45ISO TN6025 ...............................................F52
4IR4RD TN6025 ..................................................F66
4IR4TR TN6025 ..................................................F68
4IR50ISO TN6025 ...............................................F52
4IR5TR TN6025 ..................................................F68
4IR6RD TN6025 ..................................................F66
4IR6W TN6025 ...................................................F63
4IRN55 TN6025 ..................................................F61
4IRN60 TN6025 ..................................................F47
4U4006002T WP15PE ....................................... O59
4U4008003T WP15PE ....................................... O59
4U4010004T WP15PE ....................................... O59
4U4012005T WP15PE ....................................... O59
4U4016006T WP15PE ....................................... O59
4U4020007T WP15PE ....................................... O59
4U4025008T WP15PE ....................................... O59
4U7006002T WP15PE ....................................... O60
4U7006002W WP15PE ...................................... O60
4U7008003T WP15PE ....................................... O60
4U7008003W WP15PE ...................................... O60
4U7010004T WP15PE ....................................... O60
4U7010004W WP15PE ...................................... O60
4U7012005T WP15PE ....................................... O60
4U7012005W WP15PE ...................................... O60
4U7016006T WP15PE ....................................... O60
4U7016006W WP15PE ...................................... O60
4U7016046T WP15PE ....................................... O60
4U7020007T WP15PE ....................................... O60
4U7020007W WP15PE ...................................... O60
4U7020047T WP15PE ....................................... O60
4U7025008T WP15PE ....................................... O60
4U7025008W WP15PE ...................................... O60
4U7025048T WP15PE ....................................... O60
507116 C5 .......................................................E119
507116 M40 ....................................................E119
507116 M45 ....................................................E119
507117 C2 .......................................................E119
507117 M40 ....................................................E119
507117 M45 ....................................................E119
507117 M93 ....................................................E119
507124 GC .......................................................E120
507124 M40 ....................................................E120
507124 M45 ....................................................E120
507124 M93 ....................................................E120
507125 M40 ....................................................E119
507128 C2 .......................................................E120
507128 M40 ....................................................E120
507128 M45 ....................................................E120
507128 M93 ....................................................E120
507129 M40 ....................................................E119
507129 M45 ....................................................E119
507140 M40 ....................................................E119
507140 M45 ....................................................E119
507140 M93 ....................................................E119
507143 C2 .......................................................E120
507143 M40 ....................................................E120
507143 M45 ....................................................E120
507143 M93 ....................................................E120
507144 M40 ....................................................E119
507144 M45 ....................................................E119
507146 M40 ....................................................E120
507146 M45 ....................................................E120
507151 M40 ....................................................E120
507151 M43 ....................................................E120
507151 M45 ....................................................E120
507152 M40 ....................................................E119
507154 M40 ....................................................E119
507154 M45 ....................................................E119
507155 M40 ....................................................E120
507155 M45 ....................................................E120
507161 M40 ....................................................E120
507161 M45 ....................................................E120
507171 M40 ....................................................E120
507176 M40 ....................................................E120
507176 M45 ....................................................E120
507196 M40 ....................................................E119
507196 M45 ....................................................E119
507197 M40 ....................................................E120
507207 M45 ....................................................E120
507214 M40 ....................................................E120
507214 M45 ....................................................E120
507224 M40 ....................................................E120
507224 M45 ....................................................E120
507240 M40 ....................................................E121
507240 M45 ....................................................E121
507241 M40 ....................................................E121
507241 M45 ....................................................E121
507242 M40 ....................................................E121
507242 M45 ....................................................E121
507243 M40 ....................................................E121
507243 M45 ....................................................E121
507244 M40 ....................................................E121
507244 M45 ....................................................E121
507245 M40 ....................................................E121
507245 M45 ....................................................E121
507246 M40 ....................................................E121
507246 M45 ....................................................E121
507247 M40 ....................................................E121
507247 M45 ....................................................E121
507252 M40 ....................................................E121
507252 M45 ....................................................E121
507253 M40 ....................................................E121
507253 M45 ....................................................E121
507255 M40 ....................................................E121
507257 M45 ....................................................E121
507275 M40 ....................................................E116
507275 M43 ....................................................E116
507275 M45 ....................................................E116
507275 M93 ....................................................E116
507276 M40 ....................................................E117
507276 M43 ....................................................E117
507276 M45 ....................................................E117
507276 M93 ....................................................E117
507277 M45 ....................................................E116
507277 M93 ....................................................E116
507278 M40 ....................................................E116
507278 M43 ....................................................E116
507278 M45 ....................................................E116
507278 M93 ....................................................E116
507279 M40 ....................................................E117
507279 M43 ....................................................E117
507279 M45 ....................................................E117
507279 M93 ....................................................E117
507280 M45 ....................................................E116
507281 M43 ....................................................E116
507281 M45 ....................................................E116
507281 M93 ....................................................E116
507282 M43 ....................................................E117
507282 M45 ....................................................E117
507282 M93 ....................................................E117
507283 M93 ....................................................E116
507295 M43 ....................................................E116
507295 M45 ....................................................E116
507295 M93 ....................................................E116
507296 M43 ....................................................E117
507296 M45 ....................................................E117
507296 M93 ....................................................E117
507297 M43 ....................................................E116
507297 M93 ....................................................E116
507298 M43 ....................................................E117
507298 M45 ....................................................E117
507298 M93 ....................................................E117
507301 M45 ....................................................E117
507305 M45 ....................................................E114
507305 M93 ....................................................E114
507306 M45 ....................................................E114
507306 M93 ....................................................E114
507307 M45 ....................................................E114
507307 M93 ....................................................E114
507308 M43 ....................................................E114
507308 M45 ....................................................E114
507308 M93 ....................................................E114
507309 M45 ....................................................E114
507309 M93 ....................................................E114
507310 M45 ....................................................E114
507310 M93 ....................................................E114
507329 M433B ................................................E118
507330 M433B ................................................E118
507331 M433B ................................................E118
507332 M433B ................................................E118
507333 M433B ................................................E118
507334 M433B ................................................E118
507354 M433B ................................................E115
507355 M433B ................................................E115
507356 M433B ................................................E115
507357 M433B ................................................E115
507358 M433B ................................................E115
507359 M433B ................................................E115
507378 M43 ....................................................E116
507378 M45 ....................................................E116
507378 M93 ....................................................E116
507379 M43 ....................................................E117
507379 M45 ....................................................E117
50HC030M .......................................................T117
50HC040M .......................................................T117
50HC050M .......................................................T117
50HC060M .......................................................T117
50HC080M .......................................................T117
50HC100M .......................................................T117
510201500.. UNCOATED .................................O126
510202000.. UNCOATED .................................O126
510202500.. UNCOATED .................................O126
510203000.. UNCOATED .................................O126
510204001.. UNCOATED .................................O126
510205001.. UNCOATED .................................O126
510205002.. UNCOATED .................................O126
510206002.. UNCOATED .................................O126
510208003.. UNCOATED .................................O126
510210004.. UNCOATED .................................O126
510212005.. UNCOATED .................................O126
510214014.. UNCOATED .................................O126
510216006.. UNCOATED .................................O126
510218018.. UNCOATED .................................O126
510220007.. UNCOATED .................................O126
510303000.. UNCOATED .................................O127
510304001.. UNCOATED .................................O127
510305001.. UNCOATED .................................O127
510306002.. UNCOATED .................................O127
510308003.. UNCOATED .................................O127
Catalogue No. Page(s) Catalogue No. Page(s) Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 85 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRAND O b 28 2015 3 09 PM
Z86 widia.com
Index by Catalogue Number
Index
Catalogue No. Page(s)
510310004.. UNCOATED .................................O127
510312005.. UNCOATED .................................O127
510314014.. UNCOATED .................................O127
510316006.. UNCOATED .................................O127
510318018.. UNCOATED .................................O127
510320007.. UNCOATED .................................O127
51N306002.. UNCOATED .................................O128
51N306012.. UNCOATED .................................O128
51N306022.. UNCOATED .................................O128
51N308003.. UNCOATED .................................O128
51N308013.. UNCOATED .................................O128
51N308023.. UNCOATED .................................O128
51N310004.. UNCOATED .................................O128
51N310014.. UNCOATED .................................O128
51N310024.. UNCOATED .................................O128
51N312005.. UNCOATED .................................O128
51N312015.. UNCOATED .................................O128
51N312025.. UNCOATED .................................O128
51N316006.. UNCOATED .................................O128
51N316016.. UNCOATED .................................O128
51N316026.. UNCOATED .................................O128
51N316036.. UNCOATED .................................O128
51N320007.. UNCOATED .................................O128
51N320017.. UNCOATED .................................O128
51N320027.. UNCOATED .................................O128
51N320037.. UNCOATED .................................O128
524149-000030 K10F-DCL.............................O132
524149-000040 K10F-DCL.............................O132
524149-000050 K10F-DCL.............................O132
524149-000060 K10F-DCL.............................O132
524149-000080 K10F-DCL.............................O132
524149-000100 K10F-DCL.............................O132
524149-000120 K10F-DCL.............................O132
524152-003005 K10F-DCL.............................O137
524152-004005 K10F-DCL.............................O137
524152-004010 K10F-DCL.............................O137
524152-005005 K10F-DCL.............................O137
524152-005010 K10F-DCL.............................O137
524152-006005 K10F-DCL.............................O137
524152-006010 K10F-DCL.............................O137
524152-006020 K10F-DCL.............................O137
524152-008005 K10F-DCL.............................O137
524152-008010 K10F-DCL.............................O137
524152-008020 K10F-DCL.............................O137
524152-010005 K10F-DCL.............................O137
524152-010010 K10F-DCL.............................O137
524152-010020 K10F-DCL.............................O137
524152-012005 K10F-DCL.............................O137
524152-012020 K10F-DCL.............................O137
524152-016005 K10F-DCL.............................O137
524152-016010 K10F-DCL.............................O137
524152-016020 K10F-DCL.............................O137
524152-016030 K10F-DCL.............................O137
56-1014 ......................................................U40–45
56-1015 ........................................U40–41, U44–45
56-1018 ......................................................U40–45
56-1020 ......................................................U40–45
56-1025 ........................................U40–41, U44–45
56-1585 ........................................U40–42, U44–45
56-2015 ........................................U40–41, U44–45
56-2017 ........................................U40–41, U44–45
56-2020 ........................................U40–41, U44–45
56-2026 ........................................U40–41, U44–45
56-2028 ........................................U40–41, U44–45
56-2125 ........................................U40–41, U44–45
571806002MT ALTIN-MT ..................................O38
571806012MT ALTIN-MT ..................................O38
571806022MT ALTIN-MT ..................................O38
571808003MT ALTIN-MT ..................................O38
571808013MT ALTIN-MT ..................................O38
571808023MT ALTIN-MT ..................................O38
571810004MT ALTIN-MT ..................................O38
571810014MT ALTIN-MT ..................................O38
571810034MT ALTIN-MT ..................................O38
571810044MT ALTIN-MT ..................................O38
571812005MT ALTIN-MT ..................................O38
571812025MT ALTIN-MT ..................................O38
571812035MT ALTIN-MT ..................................O38
571812045MT ALTIN-MT ..................................O38
571814014MT ALTIN-MT ..................................O38
571814024MT ALTIN-MT ..................................O38
571814034MT ALTIN-MT ..................................O38
571814044MT ALTIN-MT ..................................O38
571814054MT ALTIN-MT ..................................O38
571816006MT ALTIN-MT ..................................O38
571816016MT ALTIN-MT ..................................O39
571816026MT ALTIN-MT ..................................O39
571816036MT ALTIN-MT ..................................O39
571816046MT ALTIN-MT ..................................O39
571816056MT ALTIN-MT ..................................O39
571818018MT ALTIN-MT ..................................O39
571818028MT ALTIN-MT ..................................O39
571818038MT ALTIN-MT ..................................O39
571818048MT ALTIN-MT ..................................O39
571818058MT ALTIN-MT ..................................O39
571820007MT ALTIN-MT ..................................O39
571820017MT ALTIN-MT ..................................O39
571820027MT ALTIN-MT ..................................O39
571820037MT ALTIN-MT ..................................O39
571820047MT ALTIN-MT ..................................O39
571820057MT ALTIN-MT ..................................O39
571825008MT ALTIN-MT ..................................O39
571825018MT ALTIN-MT ..................................O39
571825028MT ALTIN-MT ..................................O39
571825038MT ALTIN-MT ..................................O39
571825048MT ALTIN-MT ..................................O39
571825058MT ALTIN-MT ..................................O39
577C04002T WP15PE .......................................O24
577C04002W WP15PE......................................O24
577C04012T WP15PE .......................................O24
577C05002T WP15PE .......................................O24
577C05002W WP15PE......................................O24
577C06002T WP15PE .......................................O24
577C06002W WP15PE......................................O24
577C06012T WP15PE .......................................O24
577C07003T WP15PE .......................................O24
577C07003W WP15PE......................................O24
577C08003T WP15PE .......................................O24
577C08003W WP15PE......................................O24
577C08013T WP15PE .......................................O24
577C09004T WP15PE .......................................O24
577C09004W WP15PE......................................O24
577C10004T WP15PE .......................................O24
577C10004W WP15PE......................................O24
577C10014T WP15PE .......................................O24
577C12005T WP15PE .......................................O24
577C12005W WP15PE......................................O24
577C12015T WP15PE .......................................O24
577C14004T WP15PE .......................................O24
577C14004W WP15PE......................................O24
577C14014T WP15PE .......................................O24
577C16006T WP15PE .......................................O24
577C16006W WP15PE......................................O24
577C16016T WP15PE .......................................O24
577C18008T WP15PE .......................................O24
577C18008W WP15PE......................................O24
577C20007T WP15PE .......................................O24
577C20007W WP15PE......................................O24
577C20017T WP15PE .......................................O24
577C25008T WP15PE .......................................O24
577C25008W WP15PE......................................O24
577E10004T WS15PE ....................................... O32
577E10024T WS15PE ....................................... O32
577E10024W WS15PE ...................................... O32
577E12005V WS15PE ....................................... O32
577E12015V WS15PE ....................................... O32
577E12015W WS15PE ...................................... O32
577E16006V WS15PE ....................................... O32
577E16016V WS15PE ....................................... O32
577E16016W WS15PE ...................................... O32
577E20007V WS15PE ....................................... O32
577E20017V WS15PE ....................................... O32
577E20017W WS15PE ...................................... O32
577E25018V WS15PE ....................................... O32
577E25018W WS15PE ...................................... O32
57NC06002T WS15PE ...................................... O25
57NC06022T WS15PE ...................................... O25
57NC06022W WS15PE .....................................O25
57NC06032T WS15PE ...................................... O25
57NC06032W WS15PE .....................................O25
57NC06042W WS15PE .....................................O25
57NC08003T WS15PE ...................................... O25
57NC08023T WS15PE ...................................... O25
57NC08023W WS15PE .....................................O25
57NC08033T WS15PE ...................................... O25
57NC08033W WS15PE .....................................O25
57NC08053W WS15PE .....................................O25
57NC10004T WS15PE ...................................... O25
57NC10024T WS15PE ...................................... O25
57NC10024W WS15PE .....................................O25
57NC10034T WS15PE ...................................... O25
57NC10034W WS15PE .....................................O25
57NC10054T WS15PE ...................................... O25
57NC10054W WS15PE .....................................O25
57NC12005T WS15PE ...................................... O25
57NC12025T WS15PE ...................................... O25
57NC12025W WS15PE .....................................O25
57NC12035T WS15PE ...................................... O25
57NC12035W WS15PE .....................................O25
57NC12055T WS15PE ...................................... O25
57NC12055W WS15PE .....................................O25
57NC16006T WS15PE ...................................... O25
57NC16026T WS15PE ...................................... O25
57NC16026W WS15PE .....................................O25
57NC16036T WS15PE ...................................... O25
57NC16036W WS15PE .....................................O25
57NC16056T WS15PE ...................................... O25
57NC16056W WS15PE .....................................O25
57NC16076T WS15PE ...................................... O26
57NC16076W WS15PE .....................................O26
57NC20007T WS15PE ...................................... O26
57NC20027T WS15PE ...................................... O26
57NC20027W WS15PE .....................................O26
57NC20037T WS15PE ...................................... O26
57NC20037W WS15PE .....................................O26
57NC20057T WS15PE ...................................... O26
57NC20057W WS15PE .....................................O26
57NC20077T WS15PE ...................................... O26
57NC20077W WS15PE .....................................O26
57NC20087T WS15PE ...................................... O26
57NC20087W WS15PE .....................................O26
57NC25008T WS15PE ...................................... O26
57NC25028T WS15PE ...................................... O26
57NC25028W WS15PE .....................................O26
57NC25038T WS15PE ...................................... O26
57NC25038W WS15PE .....................................O26
57NC25058T WS15PE ...................................... O26
57NC25058W WS15PE .....................................O26
57NC25078T WS15PE ...................................... O26
57NC25078W WS15PE .....................................O26
57NC25088T WS15PE ...................................... O26
57NC25088W WS15PE .....................................O26
57NE10004T WS15PE ....................................... O33
57NE10024T WS15PE ....................................... O33
57NE10024W WS15PE ...................................... O33
57NE10034T WS15PE ....................................... O33
57NE10034W WS15PE ...................................... O33
57NE10054T WS15PE ....................................... O33
57NE10054W WS15PE ...................................... O33
57NE12005V WS15PE .......................................O33
57NE12025V WS15PE .......................................O33
57NE12025W WS15PE ...................................... O33
57NE12035V WS15PE .......................................O33
57NE12035W WS15PE ...................................... O33
57NE12055V WS15PE .......................................O33
57NE12055W WS15PE ...................................... O33
57NE16006V WS15PE .......................................O33
57NE16026V WS15PE .......................................O33
57NE16026W WS15PE ...................................... O33
57NE16036V WS15PE .......................................O33
57NE16036W WS15PE ...................................... O33
57NE16056V WS15PE .......................................O33
57NE16056W WS15PE ...................................... O33
57NE20007V WS15PE .......................................O33
57NE20027V WS15PE .......................................O33
57NE20027W WS15PE ...................................... O33
57NE20037V WS15PE .......................................O33
57NE20037W WS15PE ...................................... O33
57NE20057V WS15PE .......................................O33
57NE20057W WS15PE ...................................... O33
57NE20087V WS15PE .......................................O33
57NE20087W WS15PE ...................................... O33
57NE25008V WS15PE .......................................O33
57NE25028V WS15PE .......................................O33
57NE25028W WS15PE ...................................... O33
57NE25038V WS15PE .......................................O33
57NE25038W WS15PE ...................................... O33
57NE25058V WS15PE .......................................O33
57NE25058W WS15PE ...................................... O33
57NE25088V WS15PE .......................................O33
57NE25088W WS15PE ...................................... O33
5ER55ISO TN6025 ..............................................F49
5ER60ISO TN6025 ..............................................F49
5ER6TR TN6025 .................................................F67
5ERQ60 TN6025 .................................................F46
5IL55ISO TN6025 ...............................................F53
5IL60ISO TN6025 ...............................................F53
5IR55ISO TN6025 ...............................................F52
5IR60ISO TN6025 ...............................................F52
5IR6TR TN6025 ..................................................F68
5IRQ60 TN6025 ..................................................F47
606249 W ................................................... E30–32
606266 W ..........................................................E32
619168 W ........................... E30–31, E33–34, E123
619205 W ........................................... E30–31, E33
660W25008WW .................................................. Q4
660W32009WW .................................................. Q4
660W40009WW .................................................. Q4
660W50000WW .................................................. Q4
661W25008WW .................................................. Q4
661W32009WW .................................................. Q4
661W40009WW .................................................. Q4
Catalogue No. Page(s) Catalogue No. Page(s) Catalogue No. Page(s)
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 86 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRANDO b 28 20153 09PM
Z87
widia.com
Index by Catalogue Number
Catalogue No. Page(s)
661W50000WW .................................................. Q4
664W25008WW .................................................. Q4
664W32009WW .................................................. Q4
664W40009WW .................................................. Q4
664W50000WW .................................................. Q4
6N0606002LW .................................................... Q5
6N0608004LW .................................................... Q5
6N0609004LW .................................................... Q5
6N0610004LW .................................................... Q5
6N0611005LW .................................................... Q5
6N0612005LW .................................................... Q5
6N0614005LW .................................................... Q5
6N0616006LW .................................................... Q5
6N0618006LW .................................................... Q5
6N0620007LW .................................................... Q5
6N0622007LW .................................................... Q5
6N0625008LW .................................................... Q5
6N0630008LW .................................................... Q5
6N7006002LT ..................................................... Q6
6N7006002LW .................................................... Q6
6N7008004LT ..................................................... Q6
6N7008004LW .................................................... Q6
6N7010004LT ..................................................... Q6
6N7010004LW .................................................... Q6
6N7012005LT ..................................................... Q6
6N7012005LW .................................................... Q6
6N7014005LT ..................................................... Q6
6N7014005LW .................................................... Q6
6N7016006LT ..................................................... Q6
6N7016006LW .................................................... Q6
6N7018006LT ..................................................... Q6
6N7018006LW .................................................... Q6
6N7020007LT ..................................................... Q6
6N7020007LW .................................................... Q6
6N7025008LT ..................................................... Q6
6N7025008LW .................................................... Q6
6N7032009LT ..................................................... Q6
6N7032009LW .................................................... Q6
6NL610004LW .................................................... Q7
6NL612005LW .................................................... Q7
6NL616006LW .................................................... Q7
6NL620007LW .................................................... Q7
6NL625008LW .................................................... Q7
705002001RT TIALN-RT1 ................................O189
705002501RT TIALN-RT1 ................................O189
705003002RT TIALN-RT1 ................................O189
705004002RT TIALN-RT1 ................................O189
705005002RT TIALN-RT1 ................................O189
705006004RT TIALN-RT1 ................................O189
705008004RT TIALN-RT1 ................................O189
705010005RT TIALN-RT1 ................................O189
705012006RT TIALN-RT1 ................................O189
705016006RT TIALN-RT1 ................................O189
705020007RT TIALN-RT1 ................................O189
706002001RT TIALN-RT1 ................................O189
706002501RT TIALN-RT1 ................................O189
706003002RT TIALN-RT1 ................................O189
706004002RT TIALN-RT1 ................................O189
706005002RT TIALN-RT1 ................................O189
706006004RT TIALN-RT1 ................................O189
706008004RT TIALN-RT1 ................................O189
706010005RT TIALN-RT1 ................................O189
706012006RT TIALN-RT1 ................................O189
706101001RT TIALN-RT1 ................................O175
706102001RT TIALN-RT1 ................................O175
706102501RT TIALN-RT1 ................................O175
706103002RT TIALN-RT1 ................................O175
706104002RT TIALN-RT1 ................................O175
706105002RT TIALN-RT1 ................................O175
706106004RT TIALN-RT1 ................................O175
706108004RT TIALN-RT1 ................................O175
706110005RT TIALN-RT1 ................................O175
706112006RT TIALN-RT1 ................................O175
70N101001RT TIALN-RT1 ............................... O176
70N101501RT TIALN-RT1 ............................... O176
70N102002RT TIALN-RT1 ............................... O176
70N103002RT TIALN-RT1 ............................... O176
70N104002RT TIALN-RT1 ............................... O176
70N105002RT TIALN-RT1 ............................... O176
70N106002RT TIALN-RT1 ............................... O176
70N108003RT TIALN-RT1 ............................... O176
70N110004RT TIALN-RT1 ............................... O176
70N112005RT TIALN-RT1 ............................... O176
70N606002MT ALTIN-MT1 .............................. O152
70N608003MT ALTIN-MT1 .............................. O152
70N610004MT ALTIN-MT1 .............................. O152
70N612005MT ALTIN-MT1 .............................. O152
70N616006MT ALTIN-MT1 .............................. O152
70N620007MT ALTIN-MT1 .............................. O152
70N706002MT ALTIN-MT1 .............................. O153
70N708003MT ALTIN-MT1 .............................. O153
70N710004MT ALTIN-MT1 .............................. O153
70N712005MT ALTIN-MT1 .............................. O153
70N716006MT ALTIN-MT1 .............................. O153
70N720007MT ALTIN-MT1 .............................. O153
715002000RT TIALN-RT1 ................................O188
715002500RT TIALN-RT1 ................................O188
715003000RT TIALN-RT1 ................................O188
715004001RT TIALN-RT1 ................................O188
715005001RT TIALN-RT1 ................................O188
715006002RT TIALN-RT1 ................................O188
715008003RT TIALN-RT1 ................................O188
715010004RT TIALN-RT1 ................................O188
715012005RT TIALN-RT1 ................................O188
715016006RT TIALN-RT1 ................................O188
715020007RT TIALN-RT1 ................................O188
715101000RT TIALN-RT1 ................................O174
715102000RT TIALN-RT1 ................................O174
715102500RT TIALN-RT1 ................................O174
715103000RT TIALN-RT1 ................................O174
715104001RT TIALN-RT1 ................................O174
715105001RT TIALN-RT1 ................................O174
715106002RT TIALN-RT1 ................................O174
715108003RT TIALN-RT1 ................................O174
715110004RT TIALN-RT1 ................................O174
715112005RT TIALN-RT1 ................................O174
715116006RT TIALN-RT1 ................................O174
715120007RT TIALN-RT1 ................................O174
71N606002MT ALTIN-MT1 .............................. O152
71N608003MT ALTIN-MT1 .............................. O152
71N610004MT ALTIN-MT1 .............................. O152
71N612005MT ALTIN-MT1 .............................. O152
750503002LT TIALN-LT1 .................................O180
750504002LT TIALN-LT1 .................................O180
750505002LT TIALN-LT1 .................................O180
750508003LT TIALN-LT1 .................................O180
750510004LT TIALN-LT1 .................................O180
750512005LT TIALN-LT1 .................................O180
750516006LT TIALN-LT1 .................................O181
750520007LT TIALN-LT1 .................................O181
750525008LT TIALN-LT1 .................................O181
751506002LT TIALN-LT1 .................................O180
751508003LT TIALN-LT1 ................................. O180
751510004LT TIALN-LT1 .................................O180
751512005LT TIALN-LT1 .................................O180
751516006LT TIALN-LT1 .................................O181
751520007LT TIALN-LT1 .................................O181
751525008LT TIALN-LT1 .................................O181
752506002LT TIALN-LT1 .................................O180
752508003LT TIALN-LT1 .................................O180
752510004LT TIALN-LT1 .................................O180
752512005LT TIALN-LT1 .................................O181
752516006LT TIALN-LT1 .................................O181
752520007LT TIALN-LT1 .................................O181
752525008LT TIALN-LT1 .................................O181
754503002LT TIALN-LT1 .................................O180
754504002LT TIALN-LT1 .................................O180
754505002LT TIALN-LT1 .................................O180
754506002LT TIALN-LT1 .................................O180
754508003LT TIALN-LT1 .................................O180
754510004LT TIALN-LT1 .................................O180
754512005LT TIALN-LT1 .................................O180
754516006LT TIALN-LT1 .................................O181
754520007LT TIALN-LT1 .................................O181
754525008LT TIALN-LT1 .................................O181
758506002LT TIALN-LT1 .................................O182
758506012LT TIALN-LT1 .................................O182
758508003LT TIALN-LT1 .................................O182
758508013LT TIALN-LT1 .................................O182
758510004LT TIALN-LT1 .................................O183
758510014LT TIALN-LT1 .................................O183
758512005LT TIALN-LT1 .................................O183
758512015LT TIALN-LT1 .................................O183
758516006LT TIALN-LT1 .................................O183
758516016LT TIALN-LT1 .................................O183
758520007LT TIALN-LT1 .................................O183
758520017LT TIALN-LT1 .................................O183
758525008LT TIALN-LT1 .................................O183
758525018LT TIALN-LT1 .................................O183
759503002LT TIALN-LT1 .................................O182
759503012LT TIALN-LT1 .................................O182
759504002LT TIALN-LT1 .................................O182
759504012LT TIALN-LT1 .................................O182
759505002LT TIALN-LT1 .................................O182
759505012LT TIALN-LT1 .................................O182
759506002LT TIALN-LT1 .................................O182
759506012LT TIALN-LT1 .................................O182
759506022LT TIALN-LT1 .................................O182
759506032LT TIALN-LT1 .................................O182
759508003LT TIALN-LT1 .................................O182
759508013LT TIALN-LT1 .................................O182
759508023LT TIALN-LT1 .................................O182
759508033LT TIALN-LT1 .................................O182
759510004LT TIALN-LT1 .................................O182
759510014LT TIALN-LT1 .................................O182
759510024LT TIALN-LT1 .................................O183
759510034LT TIALN-LT1 .................................O183
759512005LT TIALN-LT1 .................................O183
759512015LT TIALN-LT1 .................................O183
759512025LT TIALN-LT1 .................................O183
759512035LT TIALN-LT1 .................................O183
759516006LT TIALN-LT1 .................................O183
759516016LT TIALN-LT1 .................................O183
759516036LT TIALN-LT1 .................................O183
759520007LT TIALN-LT1 .................................O183
759520017LT TIALN-LT1 .................................O183
759520027LT TIALN-LT1 .................................O183
759525008LT TIALN-LT1 .................................O183
759525018LT TIALN-LT1 .................................O183
75HC030M .......................................................T117
75HC040M .......................................................T117
75HC050M .......................................................T117
75HC060M .......................................................T117
75HC080M .......................................................T117
75HC100M .......................................................T117
75HC120M .......................................................T117
75HC140M .......................................................T117
75HC160M .......................................................T117
75N203022RT TIALN-RT1 ............................... O172
75N203042RT TIALN-RT1 ............................... O172
75N203062RT TIALN-RT1 ............................... O172
75N204022RT TIALN-RT1 ............................... O172
75N204042RT TIALN-RT1 ............................... O172
75N204062RT TIALN-RT1 ............................... O172
75N205022RT TIALN-RT1 ............................... O172
75N205042RT TIALN-RT1 ............................... O172
75N206032RT TIALN-RT1 ............................... O172
75N206042RT TIALN-RT1 ............................... O172
75N206052RT TIALN-RT1 ............................... O172
75N206062RT TIALN-RT1 ............................... O172
75N206072RT TIALN-RT1 ............................... O172
75N208023RT TIALN-RT1 ............................... O172
75N208043RT TIALN-RT1 ............................... O172
75N208063RT TIALN-RT1 ............................... O172
75N210024RT TIALN-RT1 ............................... O172
75N210034RT TIALN-RT1 ............................... O172
75N210044RT TIALN-RT1 ............................... O172
75N210064RT TIALN-RT1 ............................... O172
75N212025RT TIALN-RT1 ............................... O172
75N212035RT TIALN-RT1 ............................... O172
75N212045RT TIALN-RT1 ............................... O172
75N212055RT TIALN-RT1 ............................... O172
75N212065RT TIALN-RT1 ............................... O172
75N503022LT TIALN-LT1 .................................O184
75N503042LT TIALN-LT1 .................................O184
75N504022LT TIALN-LT1 .................................O184
75N504042LT TIALN-LT1 .................................O184
75N505022LT TIALN-LT1 .................................O184
75N505042LT TIALN-LT1 .................................O184
75N506002LT TIALN-LT1 .................................O184
75N506022LT TIALN-LT1 .................................O184
75N506042LT TIALN-LT1 .................................O184
75N506062LT TIALN-LT1 .................................O184
75N506082LT TIALN-LT1 .................................O184
75N508003LT TIALN-LT1 .................................O184
75N508023LT TIALN-LT1 .................................O184
75N508033LT TIALN-LT1 .................................O184
75N508043LT TIALN-LT1 .................................O184
75N508053LT TIALN-LT1 .................................O184
75N510004LT TIALN-LT1 .................................O184
75N510024LT TIALN-LT1 .................................O184
75N510034LT TIALN-LT1 .................................O184
75N510044LT TIALN-LT1 .................................O184
75N510054LT TIALN-LT1 .................................O185
75N512005LT TIALN-LT1 .................................O185
75N512025LT TIALN-LT1 .................................O185
75N512035LT TIALN-LT1 .................................O185
75N512045LT TIALN-LT1 .................................O185
75N512055LT TIALN-LT1 .................................O185
75N516006LT TIALN-LT1 .................................O185
75N516026LT TIALN-LT1 .................................O185
75N516046LT TIALN-LT1 .................................O185
75N520007LT TIALN-LT1 .................................O185
75N520027LT TIALN-LT1 .................................O185
75N520047LT TIALN-LT1 .................................O185
75N525008LT TIALN-LT1 .................................O185
75N525028LT TIALN-LT1 .................................O185
75N525048LT TIALN-LT1 .................................O185
75N806002RT TIALN-RT1 ............................... O186
75N808003RT TIALN-RT1 ............................... O186
75N810004RT TIALN-RT1 ............................... O186
75N812005RT TIALN-RT1 ............................... O186
Catalogue No. Page(s) Catalogue No. Page(s) Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 87 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRAND O b 28 2015 3 09 PM
Z88 widia.com
Index by Catalogue Number
Index
Catalogue No. Page(s)
767004002LT TIALN-LT1 .................................O193
767005002LT TIALN-LT1 .................................O193
767006004LT TIALN-LT1 .................................O193
767008004LT TIALN-LT1 .................................O193
767010005LT TIALN-LT1 .................................O193
767012006LT TIALN-LT1 .................................O193
767016006LT TIALN-LT1 .................................O193
767020007LT TIALN-LT1 .................................O193
767025008LT TIALN-LT1 .................................O193
771E10004T WS15PE ....................................... O45
771E10024T WS15PE ....................................... O45
771E12005T WS15PE ....................................... O45
771E12025T WS15PE ....................................... O45
771E16006T WS15PE ....................................... O45
771E16026T WS15PE ....................................... O45
771E20007T WS15PE ....................................... O45
771E20027T WS15PE ....................................... O45
772E10004T WS15PE ....................................... O45
772E10024T WS15PE ....................................... O45
772E12005T WS15PE ....................................... O45
772E12005V WS15PE ....................................... O45
772E12025T WS15PE ....................................... O45
772E12025V WS15PE ....................................... O45
772E16006T WS15PE ....................................... O45
772E16006V WS15PE ....................................... O45
772E16026T WS15PE ....................................... O45
772E16026V WS15PE ....................................... O45
772E20007T WS15PE ....................................... O45
772E20007V WS15PE ....................................... O45
772E20027T WS15PE ....................................... O45
772E20027V WS15PE ....................................... O45
77NE10004T WS15PE ....................................... O44
77NE10024T WS15PE ....................................... O44
77NE12005T WS15PE ....................................... O44
77NE12025T WS15PE ....................................... O44
77NE16006T WS15PE ....................................... O44
77NE16026T WS15PE ....................................... O44
77NE20007T WS15PE ....................................... O44
77NE20027T WS15PE ....................................... O44
7F0-0509A ........................................................ U29
7F0-0512T ........................................................ U29
7F0-0516A ........................................................ U29
7F0-0531A ........................................................ U29
7F0-0531T ........................................................ U29
7F0-0547A ........................................................ U29
7F0-0547T ........................................................ U29
7F0-0551A ........................................................ U29
7F0-0551T ........................................................ U29
7F0-0563A ........................................................ U29
7F0-0563T ........................................................ U29
7F0-0571A ........................................................ U29
7F0-0578A ........................................................ U29
7F0-0578T ........................................................ U29
7F0-0591A ........................................................ U29
7F0-0591T ........................................................ U29
7F0-0594A ........................................................ U29
7F0-0594T ........................................................ U29
7F0-0609A ........................................................ U29
7F0-0609T ........................................................ U29
7F0-0610A ........................................................ U29
7F0-0625A ........................................................ U29
7F0-0625T ........................................................ U29
7F0-0630A ........................................................ U29
7F0-0630T ........................................................ U29
7F0-0641A ........................................................ U29
7F0-0641T ........................................................ U29
7F0-0650T ........................................................ U29
7F0-0656A ........................................................ U29
7F0-0656T ........................................................ U29
7F0-0669A ........................................................ U29
7F0-0672A ........................................................ U29
7F0-0672T ........................................................ U29
7F0-0688A ........................................................ U29
7F0-0688T ........................................................ U29
7F0-0689A ........................................................ U29
7F0-0689T ........................................................ U29
7F1-0703A ........................................................ U30
7F1-0703T ........................................................ U30
7F1-0709A ........................................................ U30
7F1-0709T ........................................................ U30
7F1-0719T ........................................................ U30
7F1-0734A ........................................................ U30
7F1-0734T ........................................................ U30
7F1-0748A ........................................................ U30
7F1-0748T ........................................................ U30
7F1-0750A ........................................................ U30
7F1-0750T ........................................................ U30
7F1-0756T ........................................................ U30
7F1-0766A ........................................................ U30
7F1-0766T ........................................................ U30
7F1-0768T ........................................................ U30
7F1-0781A ........................................................ U30
7F1-0781T ........................................................ U30
7F1-0787A ........................................................ U30
7F1-0787T ........................................................ U30
7F1-0797N ........................................................ U30
7F1-0797T ........................................................ U30
7F1-0806A ........................................................ U30
7F1-0807A ........................................................ U30
7F1-0807T ........................................................ U30
7F1-0813A ........................................................ U30
7F1-0813T ........................................................ U30
7F1-0827A ........................................................ U30
7F1-0827T ........................................................ U30
7F1-0828A ........................................................ U30
7F1-0828T ........................................................ U30
7F1-0844T ........................................................ U30
7F1-0859A ........................................................ U30
7F1-0859T ........................................................ U30
7F1-0866A ........................................................ U30
7F1-0866T ........................................................ U30
7F1-0875A ........................................................ U30
7F1-0875T ........................................................ U30
7F1-0891A ........................................................ U30
7F1-0891T ........................................................ U30
7F1-0906A ........................................................ U30
7F1-0906T ........................................................ U30
7F1-0922A ........................................................ U30
7F1-0922T ........................................................ U30
7F1-0938A ........................................................ U30
7F1-0938T ........................................................ U30
7F1-0945A ........................................................ U30
7F1-0945T ........................................................ U30
7F1-0953A ........................................................ U30
7F1-0953T ........................................................ U30
7F1-0960T ........................................................ U30
7F2-0969N ........................................................ U31
7F2-0969T ........................................................ U31
7F2-0984A ........................................................ U31
7F2-0984T ........................................................ U31
7F2-1000A ........................................................ U31
7F2-1000T ........................................................ U31
7F2-1003A ........................................................ U31
7F2-1016A ........................................................ U31
7F2-1016T ........................................................ U31
7F2-1024A ........................................................ U31
7F2-1024T ........................................................ U31
7F2-1031A ........................................................ U31
7F2-1031T ........................................................ U31
7F2-1047A ........................................................ U31
7F2-1047T ........................................................ U31
7F2-1063A ........................................................ U31
7F2-1063T ........................................................ U31
7F2-1078A ........................................................ U31
7F2-1078T ........................................................ U31
7F2-1094A ........................................................ U31
7F2-1094T ........................................................ U31
7F2-1102A ........................................................ U31
7F2-1102T ........................................................ U31
7F2-1109T ........................................................ U31
7F2-1125A ........................................................ U31
7F2-1125T ........................................................ U31
7F2-1141A ........................................................ U31
7F2-1142A ........................................................ U31
7F2-1156A ........................................................ U31
7F2-1156T ........................................................ U31
7F2-1172T ........................................................ U31
7F2-1181A ........................................................ U31
7F2-1181T ........................................................ U31
7F2-1188A ........................................................ U31
7F2-1188T ........................................................ U31
7F2-1203T ........................................................ U31
7F2-1219A ........................................................ U31
7F2-1219T ........................................................ U31
7F2-1221A ........................................................ U31
7F2-1231A ........................................................ U31
7F2-1234N ........................................................ U31
7F2-1234T ........................................................ U31
7F2-1250A ........................................................ U31
7F2-1250T ........................................................ U31
7F2-1254T ........................................................ U31
7F2-1260A ........................................................ U31
7F2-1260T ........................................................ U31
7F2-1266A ........................................................ U31
7F2-1266T ........................................................ U31
7F2-1281T ........................................................ U31
7F2-1299A ........................................................ U31
7F2-1313A ........................................................ U31
7F2-1313T ........................................................ U31
7F2-1328T ........................................................ U32
7F2-1339A ........................................................ U32
7F2-1344A ........................................................ U32
7F2-1344T ........................................................ U32
7F2-1359T ........................................................ U32
7F2-1375A ........................................................ U32
7F2-1375T ........................................................ U32
7F2-1378A ........................................................ U32
7F3-1391T ........................................................ U33
7F3-1406A ........................................................ U33
7F3-1406T ........................................................ U33
7F3-1417A ........................................................ U33
7F3-1417T ........................................................ U33
7F3-1438A ........................................................ U33
7F3-1438T ........................................................ U33
7F3-1457A ........................................................ U33
7F3-1457T ........................................................ U33
7F3-1469A ........................................................ U33
7F3-1469T ........................................................ U33
7F3-1484T ........................................................ U33
7F3-1496A ........................................................ U33
7F3-1500A ........................................................ U33
7F3-1500T ........................................................ U33
7F3-1516T ........................................................ U33
7F3-1531T ........................................................ U33
7F3-1535A ........................................................ U33
7F3-1563A ........................................................ U33
7F3-1563T ........................................................ U33
7F3-1575A ........................................................ U33
7F3-1575T ........................................................ U33
7F3-1594T ........................................................ U33
7F3-1614A ........................................................ U33
7F3-1625A ........................................................ U33
7F3-1625T ........................................................ U33
7F3-1654A ........................................................ U33
7F3-1656T ........................................................ U33
7F3-1688A ........................................................ U33
7F3-1688T ........................................................ U33
7F3-1693T ........................................................ U33
7F3-1719A ........................................................ U33
7F3-1719T ........................................................ U33
7F3-1732A ........................................................ U33
7F3-1750A ........................................................ U33
7F3-1750T ........................................................ U33
7F3-1766T ........................................................ U33
7F3-1772A ........................................................ U33
7F3-1772T ........................................................ U33
7F3-1781T ........................................................ U33
7F3-1811A ........................................................ U33
7F3-1813A ........................................................ U33
7F3-1813T ........................................................ U33
7F3-1844T ........................................................ U33
7F3-1850T ........................................................ U33
7F3-1875A ........................................................ U33
7F3-1875T ........................................................ U33
7F4-1880T ........................................................ U34
7F4-1890A ........................................................ U34
7F4-1890T ........................................................ U34
7F4-1906A ........................................................ U34
7F4-1906T ........................................................ U34
7F4-1929A ........................................................ U34
7F4-1938A ........................................................ U34
7F4-1938T ........................................................ U34
7F4-1969A ........................................................ U34
7F4-1969T ........................................................ U34
7F4-2000A ........................................................ U34
7F4-2000T ........................................................ U34
7F4-2008T ........................................................ U34
7F4-2016T ........................................................ U34
7F4-2031A ........................................................ U34
7F4-2031T ........................................................ U34
7F4-2047A ........................................................ U34
7F4-2047T ........................................................ U34
7F4-2063A ........................................................ U34
7F4-2063T ........................................................ U34
7F4-2087A ........................................................ U34
7F4-2094T ........................................................ U34
7F4-2125A ........................................................ U34
7F4-2125T ........................................................ U34
7F4-2126A ........................................................ U34
7F4-2156T ........................................................ U34
7F4-2166A ........................................................ U32
7F4-2188T ........................................................ U34
7F4-2205A ........................................................ U34
7F4-2219A ........................................................ U34
7F4-2219T ........................................................ U34
7F4-2244A ........................................................ U34
7F4-2250A ........................................................ U34
7F4-2250T ........................................................ U34
7F4-2281T ........................................................ U34
7F4-2284A ........................................................ U34
7F4-2313A ........................................................ U34
7F4-2313T ........................................................ U34
Catalogue No. Page(s) Catalogue No. Page(s) Catalogue No. Page(s)
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 88 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRANDO b 28 20153 09PM
Z89
widia.com
Index by Catalogue Number
Catalogue No. Page(s)
7F4-2323A ........................................................ U34
7F4-2344T ........................................................ U34
7F4-2362T ........................................................ U34
7F4-2375A ........................................................ U35
7F4-2375T ........................................................ U35
7F4-2438A ........................................................ U35
7F4-2438T ........................................................ U35
7F4-2441A ........................................................ U35
7F4-2469A ........................................................ U35
7F4-2480T ........................................................ U35
7F4-2500A ........................................................ U35
7F4-2500T ........................................................ U35
7F4-2531T ........................................................ U35
7F4-2559A ........................................................ U35
7F4-2563A ........................................................ U35
7F4-2563T ........................................................ U35
7F5-2500T ........................................................ U36
7F5-2563A ........................................................ U36
7F5-2563T ........................................................ U36
7F5-2625T ........................................................ U36
7F5-2656T ........................................................ U36
7F5-2677A ........................................................ U36
7F5-2719T ........................................................ U36
7F5-2750A ........................................................ U36
7F5-2750T ........................................................ U36
7F5-2756A ........................................................ U36
7F5-2813A ........................................................ U36
7F5-2875A ........................................................ U36
7F5-2875T ........................................................ U36
7F5-2938T ........................................................ U36
7F5-2969A ........................................................ U36
7F5-2969T ........................................................ U36
7F5-3000A ........................................................ U36
7F5-3000T ........................................................ U36
7F6-3063A ........................................................ U37
7F6-3063T ........................................................ U37
7F6-3071A ........................................................ U37
7F6-3125A ........................................................ U37
7F6-3150A ........................................................ U37
7F6-3188N ........................................................ U37
7F6-3188T ........................................................ U37
7F6-3250T ........................................................ U37
7F6-3375T ........................................................ U37
7F6-3438T ........................................................ U37
7F6-3500T ........................................................ U37
7F7-3543T ........................................................ U37
7F7-3563T ........................................................ U37
7F7-3688T ........................................................ U37
7F7-3813A ........................................................ U37
7F7-3938T ........................................................ U37
7F7-4000A ........................................................ U37
7FZ-0438A ........................................................ U28
7FZ-0472A ........................................................ U28
7FZ-0484A ........................................................ U28
7FZ-0492A ........................................................ U28
7FZ-0500A ........................................................ U28
7FZ-0500T ........................................................ U28
7N0100302MJ ALTIN-MJ1 ..............................O165
7N0100302RJ TIALN-RJ1 ................................ O165
7N0100402MJ ALTIN-MJ1 ..............................O165
7N0100402RJ TIALN-RJ1 ................................ O165
7N0100502MJ ALTIN-MJ1 ..............................O165
7N0100502RJ TIALN-RJ1 ................................ O165
7N0100602MJ ALTIN-MJ1 ..............................O165
7N0100602RJ TIALN-RJ1 ................................ O165
7N0100802MJ ALTIN-MJ1 ..............................O165
7N0100802RJ TIALN-RJ1 ................................ O165
7N0101002MJ ALTIN-MJ1 ..............................O165
7N0101002RJ TIALN-RJ1 ................................ O165
7N0101202MJ ALTIN-MJ1 ..............................O165
7N0101202RJ TIALN-RJ1 ................................ O165
7N0101402MJ ALTIN-MJ1 ..............................O165
7N0101402RJ TIALN-RJ1 ................................ O165
7N0101502MJ ALTIN-MJ1 ..............................O165
7N0101502RJ TIALN-RJ1 ................................ O165
7N0101602MJ ALTIN-MJ1 ..............................O165
7N0101602RJ TIALN-RJ1 ................................ O165
7N0101802MJ ALTIN-MJ1 ..............................O165
7N0101802RJ TIALN-RJ1 ................................ O165
7N0102002MJ ALTIN-MJ1 ..............................O165
7N0102002RJ TIALN-RJ1 ................................ O165
7N0102502MJ ALTIN-MJ1 ..............................O165
7N0102502RJ TIALN-RJ1 ................................ O165
7N0103002MJ ALTIN-MJ1 ..............................O165
7N0103002RJ TIALN-RJ1 ................................ O165
7N0104002MJ ALTIN-MJ1 ..............................O165
7N0104002RJ TIALN-RJ1 ................................ O165
7N0106002MJ ALTIN-MJ1 ..............................O165
7N0106002RJ TIALN-RJ1 ................................ O165
7N0200302MJ ALTIN-MJ1 ..............................O160
7N0200302RJ TIALN-RJ1 ................................ O160
7N0200402MJ ALTIN-MJ1 ..............................O160
7N0200402RJ TIALN-RJ1 ................................ O160
7N0200502MJ ALTIN-MJ1 ..............................O160
7N0200502RJ TIALN-RJ1 ................................ O160
7N0200602MJ ALTIN-MJ1 ..............................O160
7N0200602RJ TIALN-RJ1 ................................ O160
7N0200802MJ ALTIN-MJ1 ..............................O160
7N0200802RJ TIALN-RJ1 ................................ O160
7N0201002MJ ALTIN-MJ1 ..............................O161
7N0201002RJ TIALN-RJ1 ................................ O161
7N0201202MJ ALTIN-MJ1 ..............................O161
7N0201202RJ TIALN-RJ1 ................................ O161
7N0201402MJ ALTIN-MJ1 ..............................O161
7N0201402RJ TIALN-RJ1 ................................ O161
7N0201502MJ ALTIN-MJ1 ..............................O161
7N0201502RJ TIALN-RJ1 ................................ O161
7N0201602MJ ALTIN-MJ1 ..............................O162
7N0201602RJ TIALN-RJ1 ................................ O162
7N0201802MJ ALTIN-MJ1 ..............................O162
7N0201802RJ TIALN-RJ1 ................................ O162
7N0202002MJ ALTIN-MJ1 ..............................O162
7N0202002RJ TIALN-RJ1 ................................ O162
7N0202502MJ ALTIN-MJ1 ..............................O163
7N0202502RJ TIALN-RJ1 ................................ O163
7N1200502MJ ALTIN-MJ1 ..............................O160
7N1200502RJ TIALN-RJ1 ................................ O160
7N1200602MJ ALTIN-MJ1 ..............................O160
7N1200602RJ TIALN-RJ1 ................................ O160
7N1200802MJ ALTIN-MJ1 ..............................O160
7N1200802RJ TIALN-RJ1 ................................ O160
7N1201002MJ ALTIN-MJ1 ..............................O161
7N1201002RJ TIALN-RJ1 ................................ O161
7N1201202MJ ALTIN-MJ1 ..............................O161
7N1201202RJ TIALN-RJ1 ................................ O161
7N1201402MJ ALTIN-MJ1 ..............................O161
7N1201402RJ TIALN-RJ1 ................................ O161
7N1201502MJ ALTIN-MJ1 ..............................O161
7N1201502RJ TIALN-RJ1 ................................ O161
7N1201602MJ ALTIN-MJ1 ..............................O162
7N1201602RJ TIALN-RJ1 ................................ O162
7N1201802MJ ALTIN-MJ1 ..............................O162
7N1201802RJ TIALN-RJ1 ................................O162
7N1202002MJ ALTIN-MJ1 ..............................O162
7N1202002RJ TIALN-RJ1 ................................ O162
7N1202502MJ ALTIN-MJ1 ..............................O163
7N1202502RJ TIALN-RJ1 ................................ O163
7N2100501RT TIALN-RT1 ............................... O166
7N2100601RT TIALN-RT1 ............................... O166
7N2100801RT TIALN-RT1 ............................... O166
7N2101001RT TIALN-RT1 ............................... O166
7N2101201RT TIALN-RT1 ............................... O166
7N2101501RT TIALN-RT1 ............................... O166
7N2102001RT TIALN-RT1 ............................... O166
7N2102501RT TIALN-RT1 ............................... O166
7N2103001RT TIALN-RT1 ............................... O166
7N2200400MJ ALTIN-MJ1 ..............................O160
7N2200400RJ TIALN-RJ1 ................................ O160
7N2200410MJ ALTIN-MJ1 ..............................O160
7N2200410RJ TIALN-RJ1 ................................ O160
7N2200500MJ ALTIN-MJ1 ..............................O160
7N2200500RJ TIALN-RJ1 ................................ O160
7N2200510MJ ALTIN-MJ1 ..............................O160
7N2200510RJ TIALN-RJ1 ................................ O160
7N2200520MJ ALTIN-MJ1 ..............................O160
7N2200520RJ TIALN-RJ1 ................................ O160
7N2200600MJ ALTIN-MJ1 ..............................O160
7N2200600RJ TIALN-RJ1 ................................ O160
7N2200610MJ ALTIN-MJ1 ..............................O160
7N2200610RJ TIALN-RJ1 ................................ O160
7N2200620MJ ALTIN-MJ1 ..............................O160
7N2200620RJ TIALN-RJ1 ................................ O160
7N2200701MJ ALTIN-MJ1 ..............................O160
7N2200701RJ TIALN-RJ1 ................................ O160
7N2200711MJ ALTIN-MJ1 ..............................O160
7N2200711RJ TIALN-RJ1 ................................ O160
7N2200721MJ ALTIN-MJ1 ..............................O160
7N2200721RJ TIALN-RJ1 ................................ O160
7N2200801MJ ALTIN-MJ1 ..............................O160
7N2200801RJ TIALN-RJ1 ................................ O160
7N2200811MJ ALTIN-MJ1 ..............................O160
7N2200811RJ TIALN-RJ1 ................................ O160
7N2200821MJ ALTIN-MJ1 ..............................O160
7N2200821RJ TIALN-RJ1 ................................ O160
7N2200901MJ ALTIN-MJ1 ..............................O160
7N2200901RJ TIALN-RJ1 ................................ O160
7N2200911MJ ALTIN-MJ1 ..............................O161
7N2200911RJ TIALN-RJ1 ................................ O161
7N2200921MJ ALTIN-MJ1 ..............................O161
7N2200921RJ TIALN-RJ1 ................................ O161
7N2201001MJ ALTIN-MJ1 ..............................O161
7N2201001RJ TIALN-RJ1 ................................ O161
7N2201011MJ ALTIN-MJ1 ..............................O161
7N2201011RJ TIALN-RJ1 ................................ O161
7N2201021MJ ALTIN-MJ1 ..............................O161
7N2201021RJ TIALN-RJ1 ................................ O161
7N2201031MJ ALTIN-MJ1 ..............................O161
7N2201031RJ TIALN-RJ1 ................................ O161
7N2201201MJ ALTIN-MJ1 ..............................O161
7N2201201RJ TIALN-RJ1 ................................ O161
7N2201211MJ ALTIN-MJ1 ..............................O161
7N2201211RJ TIALN-RJ1 ................................ O161
7N2201221MJ ALTIN-MJ1 ..............................O161
7N2201221RJ TIALN-RJ1 ................................ O161
7N2201231MJ ALTIN-MJ1 ..............................O161
7N2201231RJ TIALN-RJ1 ................................ O161
7N2201401MJ ALTIN-MJ1 ..............................O161
7N2201401RJ TIALN-RJ1 ................................ O161
7N2201411MJ ALTIN-MJ1 ..............................O161
7N2201411RJ TIALN-RJ1 ................................ O161
7N2201421MJ ALTIN-MJ1 ..............................O161
7N2201421RJ TIALN-RJ1 ................................ O161
7N2201431MJ ALTIN-MJ1 ..............................O161
7N2201431RJ TIALN-RJ1 ................................ O161
7N2201441MJ ALTIN-MJ1 ..............................O161
7N2201441RJ TIALN-RJ1 ................................ O161
7N2201501MJ ALTIN-MJ1 ..............................O161
7N2201501RJ TIALN-RJ1 ................................ O161
7N2201511MJ ALTIN-MJ1 ..............................O161
7N2201511RJ TIALN-RJ1 ................................ O161
7N2201521MJ ALTIN-MJ1 ..............................O161
7N2201521RJ TIALN-RJ1 ................................ O161
7N2201531MJ ALTIN-MJ1 ..............................O161
7N2201531RJ TIALN-RJ1 ................................ O161
7N2201541MJ ALTIN-MJ1 ..............................O161
7N2201541RJ TIALN-RJ1 ................................ O161
7N2201551MJ ALTIN-MJ1 ..............................O161
7N2201551RJ TIALN-RJ1 ................................ O161
7N2201561RJ TIALN-RJ1 ................................ O161
7N2201571RJ TIALN-RJ1 ................................ O161
7N2201601MJ ALTIN-MJ1 ..............................O162
7N2201601RJ TIALN-RJ1 ................................ O162
7N2201611MJ ALTIN-MJ1 ..............................O161
7N2201611RJ TIALN-RJ1 ................................ O161
7N2201621MJ ALTIN-MJ1 ..............................O161
7N2201621RJ TIALN-RJ1 ................................ O161
7N2201631MJ ALTIN-MJ1 ..............................O161
7N2201631RJ TIALN-RJ1 ................................ O161
7N2201641MJ ALTIN-MJ1 ..............................O161
7N2201641RJ TIALN-RJ1 ................................ O161
7N2201701MJ ALTIN-MJ1 ..............................O162
7N2201701RJ TIALN-RJ1 ................................ O162
7N2201711MJ ALTIN-MJ1 ..............................O162
7N2201711RJ TIALN-RJ1 ................................ O162
7N2201721MJ ALTIN-MJ1 ..............................O162
7N2201721RJ TIALN-RJ1 ................................ O162
7N2201731MJ ALTIN-MJ1 ..............................O162
7N2201731RJ TIALN-RJ1 ................................ O162
7N2201741MJ ALTIN-MJ1 ..............................O162
7N2201741RJ TIALN-RJ1 ................................ O162
7N2201801MJ ALTIN-MJ1 ..............................O162
7N2201801RJ TIALN-RJ1 ................................ O162
7N2201811MJ ALTIN-MJ1 ..............................O162
7N2201811RJ TIALN-RJ1 ................................ O162
7N2201821MJ ALTIN-MJ1 ..............................O162
7N2201821RJ TIALN-RJ1 ................................ O162
7N2201831MJ ALTIN-MJ1 ..............................O162
7N2201831RJ TIALN-RJ1 ................................ O162
7N2201841MJ ALTIN-MJ1 ..............................O162
7N2201841RJ TIALN-RJ1 ................................ O162
7N2201901MJ ALTIN-MJ1 ..............................O162
7N2201901RJ TIALN-RJ1 ................................ O162
7N2201911MJ ALTIN-MJ1 ..............................O162
7N2201911RJ TIALN-RJ1 ................................ O162
7N2201921MJ ALTIN-MJ1 ..............................O162
7N2201921RJ TIALN-RJ1 ................................ O162
7N2201931MJ ALTIN-MJ1 ..............................O162
7N2201931RJ TIALN-RJ1 ................................ O162
7N2201941MJ ALTIN-MJ1 ..............................O162
7N2201941RJ TIALN-RJ1 ................................ O162
7N2202001MJ ALTIN-MJ1 ..............................O162
7N2202001RJ TIALN-RJ1 ................................ O162
7N2202011MJ ALTIN-MJ1 ..............................O162
7N2202011RJ TIALN-RJ1 ................................ O162
7N2202021MJ ALTIN-MJ1 ..............................O162
7N2202021RJ TIALN-RJ1 ................................ O162
7N2202031MJ ALTIN-MJ1 ..............................O162
7N2202031RJ TIALN-RJ1 ................................ O162
7N2202041MJ ALTIN-MJ1 ..............................O162
7N2202041RJ TIALN-RJ1 ................................ O162
7N2202051RJ TIALN-RJ1 ................................ O162
7N2202061RJ TIALN-RJ1 ................................ O162
Catalogue No. Page(s) Catalogue No. Page(s) Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 89 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRAND O b 28 2015 3 09 PM
Z90 widia.com
Index by Catalogue Number
Index
Catalogue No. Page(s)
7N2202071RJ TIALN-RJ1 ................................ O162
7N2202091RJ TIALN-RJ1 ................................ O162
7N2202501MJ ALTIN-MJ1 ..............................O162
7N2202501RJ TIALN-RJ1 ................................ O162
7N2202511MJ ALTIN-MJ1 ..............................O163
7N2202511RJ TIALN-RJ1 ................................ O163
7N2202521MJ ALTIN-MJ1 ..............................O163
7N2202521RJ TIALN-RJ1 ................................ O163
7N2202531MJ ALTIN-MJ1 ..............................O163
7N2202531RJ TIALN-RJ1 ................................ O163
7N2202541MJ ALTIN-MJ1 ..............................O163
7N2202541RJ TIALN-RJ1 ................................ O163
7N2203002MJ ALTIN-MJ1 ..............................O163
7N2203002RJ TIALN-RJ1 ................................ O163
7N2203012MJ ALTIN-MJ1 ..............................O163
7N2203012RJ TIALN-RJ1 ................................ O163
7N2203022MJ ALTIN-MJ1 ..............................O163
7N2203022RJ TIALN-RJ1 ................................ O163
7N2203032MJ ALTIN-MJ1 ..............................O163
7N2203032RJ TIALN-RJ1 ................................ O163
7N2203042MJ ALTIN-MJ1 ..............................O163
7N2203042RJ TIALN-RJ1 ................................ O163
7N2203052RJ TIALN-RJ1 ................................ O163
7N2203062RJ TIALN-RJ1 ................................ O163
7S0.5SE ............................................................ U41
7S0.5SL ............................................................ U41
7S0.5SM ........................................................... U40
7S0.5SS ............................................................ U40
7S0.5TE ............................................................ U45
7S0SE ............................................................... U41
7S0SL ............................................................... U41
7S0SM .............................................................. U40
7S0SS ............................................................... U40
7S0TE................................................................ U45
7S0TL ................................................................ U45
7S0TM .............................................................. U44
7S1.5SE ............................................................ U41
7S1.5SM ........................................................... U40
7S1.5SS ............................................................ U40
7S1.5TM ........................................................... U44
7S1SE ............................................................... U41
7S1SL ............................................................... U41
7S1SM .............................................................. U40
7S1SS ............................................................... U40
7S1TL ................................................................ U45
7S1TM .............................................................. U44
7S1TS ............................................................... U44
7S2.5SM ........................................................... U40
7S2.5SS ............................................................ U40
7S2.5TM-4MT ................................................... U44
7S2.5TS ............................................................ U44
7S2SE ............................................................... U41
7S2SL ............................................................... U41
7S2SM .............................................................. U40
7S2SS ............................................................... U40
7S2TE................................................................ U45
7S2TL ................................................................ U45
7S2TM .............................................................. U44
7S2TS ............................................................... U44
7S3SE ............................................................... U41
7S3SL ............................................................... U41
7S3SM .............................................................. U40
7S3SS ............................................................... U40
7S3TL ................................................................ U45
7S3TM .............................................................. U44
7S3TS ............................................................... U44
7S4SE ............................................................... U41
7S4SL ............................................................... U41
7S4SM .............................................................. U40
7S4SS ............................................................... U40
7S4TL ................................................................ U45
7S4TM .............................................................. U44
7S4TS ............................................................... U44
7S5SM .............................................................. U40
7S5SS ............................................................... U40
7S5TL ................................................................ U45
7S5TM .............................................................. U44
7S5TS ............................................................... U44
7S7SL ............................................................... U41
7S7SM .............................................................. U40
7S7TL ................................................................ U45
7S7TM .............................................................. U44
7SZSL................................................................ U41
7SZSM .............................................................. U40
7SZSS ............................................................... U40
7SZTL ................................................................ U45
7SZTS ............................................................... U44
8S0SL ............................................................... U43
8S0SM .............................................................. U42
8S0SS ............................................................... U42
8S1SL ............................................................... U43
8S1SM .............................................................. U42
8S1SS ............................................................... U42
8S2SE ............................................................... U43
8S2SL ............................................................... U43
8S2SM .............................................................. U42
8S2SS ............................................................... U42
8S3SM .............................................................. U42
8S4SS ............................................................... U42
A08JSCFPL06 WG ............................................. C66
A08JSCFPR06 WG ............................................. C66
A08JSCLCL06 WG ............................................. C67
A08JSCLCR06 WG ............................................. C67
A08JSCLPL06 WG ............................................. C69
A08JSCLPR06 WG ............................................. C69
A08JSTFPL09 WG ............................................. C78
A08JSTFPR09 WG ............................................. C78
A10KNNTOR1 W .........................................E79, F32
A10KSCFPL06 WG ............................................. C66
A10KSCFPR06 WG ............................................ C66
A10KSCLCL06 WG ............................................. C67
A10KSCLCR06 WG ............................................ C67
A10KSCLPL06 WG ............................................. C69
A10KSCLPR06 WG ............................................ C69
A10KSDUCL07 WG ............................................ C73
A10KSDUCR07 WG ............................................ C73
A10KSTFCL11 WG ............................................. C76
A10KSTFCR11 WG ............................................. C76
A10KSTFPL11 WG ............................................. C78
A10KSTFPR11 WG ............................................. C78
A10KSTWPL11 WG ............................................ C80
A12MNNTOL2 W ........................................E78, F31
A12MNNTOR1 W ........................................E79, F32
A12MNNTOR2 W ........................................E78, F31
A12MSCFPL06 WG ............................................ C66
A12MSCFPR06 WG............................................ C66
A12MSCLPL06 WG ............................................ C69
A12MSCLPR06 WG............................................ C69
A12MSDQPL07 WG ........................................... C72
A12MSDQPR07 WG ........................................... C72
A12MSDUPL07 WG ........................................... C75
A12MSDUPR07 WG ........................................... C75
A12MSDXPL07 .................................................. C76
A12MSDXPR07.................................................. C76
A12MSTFPL11 WG ............................................ C78
A12MSTFPR11 WG ............................................ C78
A12MSTWPL11 WG ........................................... C80
A12MSTWPR11 WG........................................... C80
A16MNNTOL2 W ........................................E78, F31
A16MNNTOR2 W ........................................E78, F31
A16RCTFPL11 WG ............................................. C65
A16RCTFPR11 WG ............................................ C65
A16RPWLNL06 WG............................................ C61
A16RPWLNR06 WG ........................................... C61
A16RSCFPL06 WG ............................................. C66
A16RSCFPL09 WG ............................................. C66
A16RSCFPR06 WG ............................................ C66
A16RSCFPR09 WG ............................................ C66
A16RSCLCL09 WG ............................................ C67
A16RSCLCR09 WG ............................................ C67
A16RSCLPL06 WG ............................................. C69
A16RSCLPL09 WG ............................................. C69
A16RSCLPR06 WG ............................................ C69
A16RSCLPR09 WG ............................................ C69
A16RSDQCL07 WG ............................................ C71
A16RSDQCR07 WG............................................ C71
A16RSDQPL07 WG ............................................ C72
A16RSDQPR07 WG ............................................ C72
A16RSDUCL07 WG ............................................ C73
A16RSDUCL11 WG ............................................ C73
A16RSDUCR07 WG ............................................ C73
A16RSDUCR11 WG ............................................ C73
A16RSDUPL07 WG ............................................ C75
A16RSDUPR07 WG ............................................ C75
A16RSDXPL07 ................................................... C76
A16RSDXPR07 .................................................. C76
A16RSTFPL11 WG ............................................. C78
A16RSTFPR11 WG ............................................. C78
A16RSTWPL11 WG ............................................ C80
A16RSTWPR11 WG ........................................... C80
A16RSVQBR11 WG ............................................ C80
A20QNNTOL2 W .........................................E78, F31
A20QNNTOR2 W .........................................E78, F31
A20SPWLNL06 WG ............................................ C61
A20SPWLNR06 WG ........................................... C61
A20SSCFPL06 WG ............................................. C66
A20SSCFPL09 WG ............................................. C66
A20SSCFPR06 WG ............................................ C66
A20SSCFPR09 WG ............................................ C66
A20SSCLCL09 WG ............................................. C67
A20SSCLCR09 WG ............................................ C67
A20SSCLPL09 WG ............................................. C69
A20SSCLPR09 WG ............................................ C69
A20SSDQCL11 WG ............................................ C71
A20SSDQCR11 WG ............................................ C71
A20SSDQPL11 WG ............................................ C72
A20SSDQPR11 WG ............................................ C72
A20SSDUCL11 WG ............................................ C73
A20SSDUCR11 WG ............................................ C73
A20SSDUPL11 WG ............................................ C75
A20SSDUPR11 WG ............................................ C75
A20SSDXPL11 ................................................... C76
A20SSDXPR11 .................................................. C76
A20SSTFPL16 WG ............................................. C78
A20SSTFPR16 WG ............................................. C78
A20SSVUBR11 WG ............................................ C81
A25RCTFPL16 WG ............................................. C65
A25RCTFPR16 WG ............................................ C65
A25RDCLNL12KC04 WG .................................... C56
A25RDCLNR12KC04 WG ................................... C56
A25RDDPNR11KC04 WG ................................... C56
A25RDDUNL11KC04 WG ................................... C57
A25RDDUNR11KC04 WG ................................... C57
A25RDTFNL16KC04 WG .................................... C58
A25RDTFNR16KC04 WG .................................... C58
A25RDWLNL06KC04 WG ................................... C59
A25RDWLNL08KC04 WG ................................... C59
A25RDWLNR06KC04 WG .................................. C59
A25RDWLNR08KC04 WG .................................. C59
A25RNNTOL2 W .........................................E78, F31
A25RNNTOL3 W .........................................E78, F31
A25RNNTOR2 W .........................................E78, F31
A25RNNTOR3 W .........................................E78, F31
A25RPWLNR08 WG ........................................... C61
A25RWMTEL0316M W .......................................E35
A25RWMTEL0416M W .......................................E35
A25RWMTER0316M W .......................................E35
A25RWMTER0416M W .......................................E35
A25TPCLNL12 WG ............................................. C60
A25TPCLNR12 WG ............................................ C60
A25TPTFNL16 WG ............................................. C60
A25TPTFNR16 WG ............................................. C60
A25TSCLCL12 WG ............................................. C67
A25TSCLCR12 WG ............................................ C67
A25TSDQCL11 WG ............................................ C71
A25TSDQCR11 WG ............................................ C71
A25TSDQPL11 WG ............................................ C72
A25TSDQPR11 WG ............................................ C72
A25TSDUCL11 WG ............................................ C73
A25TSDUCR11 WG ............................................ C73
A25TSDUPL11 WG............................................. C75
A25TSDUPR11 WG ............................................ C75
A25TSTFPL16 WG ............................................. C78
A25TSTFPR16 WG ............................................. C78
A25TSVQBL16 WG............................................. C80
A25TSVQBR16 WG ............................................ C80
A25TSVUBL16 WG ............................................. C81
A25TSVUBR16 WG ............................................ C81
A32SDCLNL12KC04 WG .................................... C56
A32SDCLNR12KC04 WG ................................... C56
A32SDDPNL15KC06 WG ................................... C56
A32SDDPNR15KC06 WG ................................... C56
A32SDDQNL15KC06 WG ................................... C57
A32SDDQNR15KC06 WG ................................... C57
A32SDDUNL11KC04 WG ................................... C57
A32SDDUNL15KC06 WG ................................... C57
A32SDDUNR11KC04 WG ................................... C57
A32SDDUNR15KC06 WG ................................... C57
A32SDTFNL16KC04 WG .................................... C58
A32SDTFNR16KC04 WG .................................... C58
A32SDVUNL16KC04 WG .................................... C58
A32SDVUNR16KC04 WG ................................... C58
A32SDWLNL08KC04 WG ................................... C59
A32SDWLNR08KC04 WG ................................... C59
A32SNNTOL3 W .........................................E78, F31
A32SNNTOR3 W .........................................E78, F31
A32SPWLNL08 WG ............................................ C61
A32SPWLNR08 WG ........................................... C61
A32SWMTEL0319M W .......................................E35
A32SWMTEL0419M W .......................................E35
A32SWMTEL0519M W .......................................E35
A32SWMTEL0619M W .......................................E35
A32SWMTER0319M W .......................................E35
A32SWMTER0419M W .......................................E35
A32SWMTER0519M W .......................................E35
A32SWMTER0619M W .......................................E35
A32TSCLCL12 WG ............................................. C67
A32TSCLCR12 WG ............................................ C67
A32TSDUCL15 WG ............................................ C73
A32TSDUCR15 WG ............................................ C73
A32UPCLNL12 WG ............................................ C60
A32UPCLNR12 WG ............................................ C60
Catalogue No. Page(s) Catalogue No. Page(s) Catalogue No. Page(s)
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 90 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRANDO b 28 20153 09PM
Z91
widia.com
Index by Catalogue Number
Catalogue No. Page(s)
A32UPTFNR16 WG ............................................ C60
A40TDCLNL12KC04 WG .................................... C56
A40TDCLNL16KC06 WG .................................... C56
A40TDCLNR12KC04 WG .................................... C56
A40TDCLNR16KC06 WG .................................... C56
A40TDDPNL15KC06 WG .................................... C56
A40TDDPNR15KC06 WG ................................... C56
A40TDDQNL15KC06 WG ................................... C57
A40TDDQNR15KC06 WG ................................... C57
A40TDDUNL15KC06 WG.................................... C57
A40TDDUNR15KC06 WG ................................... C57
A40TDVUNL16KC04 WG .................................... C58
A40TDVUNR16KC04 WG.................................... C58
A40TDWLNL08KC04 WG ................................... C59
A40TDWLNR08KC04 WG ................................... C59
A40TNNTOL3 W..........................................E78, F31
A40TNNTOL4 W..........................................E78, F31
A40TNNTOR3 W .........................................E78, F31
A40TNNTOR4 W .........................................E78, F31
A40TWMTEL0522M W .......................................E35
A40TWMTEL0622M W .......................................E35
A40TWMTER0522M W .......................................E35
A40TWMTER0622M W .......................................E35
A40VPCLNL12 WG ............................................. C60
A40VPCLNL16 WG ............................................. C60
A40VPCLNR12 WG ............................................ C60
A40VPCLNR16 WG ............................................ C60
A40VPTFNL22 WG ............................................. C60
A40VPTFNR22 WG ............................................. C60
A50UDDUNL15KC06 WG ................................... C57
A50UDDUNR15KC06 WG ................................... C57
A50UNNTOL4 W .........................................E78, F31
A50UNNTOR4 W .........................................E78, F31
ABC1000R WG ..................................................D63
ABC1250R WG ..................................................D63
ABC1500R WG ..................................................D63
ABC500R WG .................................................... D63
ABC750R WG .................................................... D63
ABD06187R CG5 ............................................... D67
ABD06187R CM1 .............................................. D67
ABD06312R CG5 ............................................... D67
ABD06312R CM1 .............................................. D67
ABD09281R CG5 ............................................... D67
ABD09281R CM1 .............................................. D67
ABD09500R CG5 ............................................... D67
ABD09500R CM1 .............................................. D67
ABD125375R CG5 ............................................. D67
ABD125375R CM1 ............................................ D67
ABD125625R CG5 ............................................. D67
ABD125625R CM1 ............................................ D67
ABD156500R CG5 ............................................. D67
ABD156875R CG5 ............................................. D67
ABD156875RM CBN6 ........................................ D67
AGD09503 CG5 ................................................. D68
AGD09503 CM1 ................................................ D68
AGD12504 CG5 ................................................. D68
AGD15605 CG5 ................................................. D68
AKEY WG ...........................................D59, D71, D84
AL163L W ...........................................................F70
AL163R W ..........................................................F70
AL203L W ...........................................................F70
AL203R W ..........................................................F70
AL253R W ..........................................................F70
AL254L W ...........................................................F70
AL254R W ..........................................................F70
AL323R W ..........................................................F70
AL324R W ..........................................................F70
AL325R W ..........................................................F70
AL404R W ..........................................................F70
AL405R W ..........................................................F70
APD06187R CG5 ............................................... D68
APD09281R CM1 .............................................. D68
APD125375R CG5 ............................................. D68
APD156500R CM1 ............................................ D68
AS832/AS-8-32 WG ................. D59, D62, D71, D84
ATBM12100 WG ................................................ D62
ATBM16100 WG ................................................ D62
ATBM1638 WG .................................................. D62
ATBM20102 WG ................................................ D62
ATBM25102 WG ................................................ D62
ATD12560F2 CM1 ............................................. D69
ATD15660F2 CG5 .............................................. D69
ATD15660F2 CM1 ............................................. D69
AVR203L W ........................................................F74
AVR203R W ........................................................F74
AVR253L W ........................................................F74
AVR253R W ........................................................F74
AVR254R W ........................................................F74
AVR25D3L W ......................................................F74
AVR25D3R W ......................................................F74
AVR25D4L W ......................................................F74
AVR25D4R W ......................................................F74
AVR324R W ........................................................F74
AVR325R W ........................................................F74
AVR32D3R W ......................................................F74
AVR403R W ........................................................F74
AVR405R W ........................................................F74
AVR505R W ........................................................F74
AW250/AW-250 WG ................. D59, D62, D71, D84
BB1871250R CG5 ............................................. D69
BB187750R CG5 ............................................... D69
BB2501000R CG5 ............................................. D69
BB2501000R CM1 ............................................ D69
BB3121250R CG5 ............................................. D69
BB3121250R CM1 ............................................ D69
BP187600R CG5 ............................................... D70
BP250825R CG5 ............................................... D70
BS832 WG ................................ D59, D62, D71, D84
BSBM20152 WG ................................................ D62
BT40BRFX185060M WG................................... W60
BT40BRFX245060M WG................................... W60
BT40BRFX320060M WG................................... W60
BT40BRFX420060M WG................................... W60
BT40BRFX550065M WG................................... W60
BT50BRFX320060M WG................................... W61
BT50BRFX420060M WG................................... W61
BT50BRFX550065M WG................................... W61
BT50BRFX720070M WG................................... W61
BW312 WG ............................... D59, D62, D71, D84
CBIT WG ............................................D59, D71, D84
CC09 ...................................................D10–13, D63
CC11 ................................................................. D10
CC11 WG ....................D10–13, D28, D59, D71, D84
CCBM41007L WG ............................................. D12
CCBM41007R WG ............................................. D12
CCBM41527L WG ............................................. D12
CCBM41527R WG ............................................. D12
CCBM4812225R WG ......................................... D13
CCBM4812485R WG ......................................... D13
CCBM4816225R WG ......................................... D13
CCBM4816485R WG ......................................... D13
CCBM51000L WG ............................................. D12
CCBM51000R WG ............................................. D12
CCBM51005L WG ............................................. D12
CCBM51005R WG ............................................. D12
CCBM51525L WG ............................................. D12
CCBM5312255R WG ......................................... D13
CCBM5312510R WG ......................................... D13
CCBM5316255L WG ......................................... D13
CCBM5316255R WG ......................................... D13
CCBM5316510R WG ......................................... D13
CCBM5316515L WG ......................................... D13
CCBM5316515R WG ......................................... D13
CCBM61000L WG ............................................. D12
CCBM61000R WG ............................................. D12
CCBM61005L WG ............................................. D12
CCBM61005R WG ............................................. D12
CCBM61520L WG ............................................. D12
CCBM61525L WG ............................................. D12
CCBM61525R WG ............................................. D12
CCBM6516320R WG ......................................... D13
CCBM6516325L WG ......................................... D13
CCBM6516325R WG ......................................... D13
CCBM6612320R WG ......................................... D13
CCBM6612325L WG ......................................... D13
CCBM6612325R WG ......................................... D13
CCBM6612630R WG ......................................... D13
CCBM6612635L WG ......................................... D13
CCBM6612635R WG ......................................... D13
CCBM81005L WG ............................................. D12
CCBM81520L WG ............................................. D12
CCBM81520R WG ............................................. D12
CCBM81525L WG ............................................. D12
CCBM81525R WG ............................................. D12
CCGT0602021P TN10U ................................... B122
CCGT0602021P TN15U ................................... B122
CCGT060202AL3 HCK10 ................................. B155
CCGT060202AL3 HWK15 ................................ B155
CCGT0602041P TN10U ................................... B122
CCGT0602041P TN15U ................................... B122
CCGT060204AL3 HCK10 ................................. B155
CCGT060204AL3 HWK15 ................................ B155
CCGT0602081P TN10U ................................... B122
CCGT09T3011P TN10U ................................... B122
CCGT09T3011P TN15U ................................... B122
CCGT09T3021P TN10U ................................... B122
CCGT09T3021P TN15U ................................... B122
CCGT09T302AL3 HWK15 ................................ B155
CCGT09T3041P TN10U ................................... B122
CCGT09T3041P TN15U ................................... B122
CCGT09T304AL3 HCK10 ................................. B155
CCGT09T304AL3 HWK15 ................................ B155
CCGT09T3081P TN10U ................................... B122
CCGT09T3081P TN15U ................................... B122
CCGT09T308AL3 HWK15 ................................ B155
CCGT120402AL3 HWK15 ................................ B155
CCGT120404AL3 HCK10 ................................. B155
CCGT120404AL3 HWK15 ................................ B155
CCGT120408AL3 HCK10 ................................. B155
CCGT120408AL3 HWK15 ................................ B155
CCGW060202EC WBH25P............................... B197
CCGW060202EFWC WBH25P.......................... B198
CCGW060202S01015C WBH10P .................... B197
CCGW060204EFWC WBH25P.......................... B198
CCGW060204FST WDN00U............................. B197
CCGW060204FST WDN25U............................. B197
CCGW060204S01015C WBH10P .................... B197
CCGW060204S01015C WBH25P .................... B197
CCGW09T304EFWC WBH25P .......................... B198
CCGW09T304FST WDN00U ............................. B197
CCGW09T304FST WDN25U ............................. B197
CCGW09T304S01015C WBH25P .................... B197
CCGW09T304S01015MT WBH10P.................. B198
CCGW09T308EFWC WBH25P .......................... B198
CCGW09T308FST WDN00U ............................. B197
CCGW09T308FST WDN25U ............................. B197
CCGW09T308S01015C WBH25P .................... B197
CCGW09T308S01015MT WBH10P.................. B198
CCGW09T308S01015MT WBH30P.................. B198
CCLNL2525M12MN4 WG .................................. C31
CCLNL2525M12MX7 WG .................................. C31
CCLNR2525M12MF7 WG .................................. C32
CCLNR2525M12MN4 WG .................................. C31
CCLNR2525M12MN7 WG .................................. C31
CCLNR2525M12MX7 WG .................................. C31
CCLNR3225P12MN7 WG ................................... C31
CCLNR3225P12MX7 WG ................................... C31
CCMT060202 THM ............................................ B30
CCMT0602021P TN10P .................................. B123
CCMT0602021P TN10U .................................. B123
CCMT0602021P TN15M ................................. B123
CCMT0602021P TN15U .................................. B123
CCMT0602021P TN20K .................................. B123
CCMT0602021P TN30M ................................. B123
CCMT060202FP WM25CT ................................. B31
CCMT060202FP WP15CT .................................. B31
CCMT060202FP WP25CT .................................. B31
CCMT060202FW WP15CT................................. B32
CCMT060204 HK1500 ...................................... B30
CCMT060204 THM ............................................ B30
CCMT060204 TTI15 .......................................... B30
CCMT060204 TTR ............................................. B30
CCMT0602041P TN10P .................................. B123
CCMT0602041P TN10U .................................. B123
CCMT0602041P TN15M ................................. B123
CCMT0602041P TN15U .................................. B123
CCMT0602041P TN20K .................................. B123
CCMT0602041P TN20P .................................. B123
CCMT0602041P TN30M ................................. B123
CCMT0602042 TTI15 ........................................ B30
CCMT060204FP WK20CT .................................. B31
CCMT060204FP WM15CT ................................. B31
CCMT060204FP WM25CT ................................. B31
CCMT060204FP WP15CT .................................. B31
CCMT060204FP WP25CT .................................. B31
CCMT060204FP WS10PT .................................. B31
CCMT060204FP WS25PT .................................. B31
CCMT060204FW WM15CT ................................ B32
CCMT060204FW WP15CT................................. B32
CCMT060204MP WK20CT ................................ B32
CCMT060204MP WM15CT................................ B32
CCMT060204MP WM25CT................................ B32
CCMT060204MP WP15CT ................................ B32
CCMT060204MP WP25CT ................................ B32
CCMT060204MP WS10PT ................................. B32
CCMT0602081P TN10P .................................. B123
CCMT0602081P TN10U .................................. B123
CCMT0602081P TN15M ................................. B123
CCMT0602081P TN20K .................................. B123
CCMT0602081P TN20P .................................. B123
CCMT0602081P TN30M ................................. B123
CCMT060208FP WK20CT .................................. B31
CCMT060208FP WM15CT ................................. B31
CCMT060208FP WM25CT ................................. B31
CCMT060208FP WP15CT .................................. B31
CCMT060208FP WP25CT .................................. B31
CCMT060208FP WS10PT .................................. B31
CCMT060208FP WS25PT .................................. B31
CCMT060208FW WM15CT ................................ B32
CCMT060208FW WP15CT................................. B32
CCMT060208MU TN5120 ................................. B33
CCMT060208MU WK20CT ................................ B33
Catalogue No. Page(s) Catalogue No. Page(s) Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 91 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRAND O b 28 2015 3 09 PM
Z92 widia.com
Index by Catalogue Number
Index
Catalogue No. Page(s)
CCMT060208MU WM25CT ............................... B33
CCMT090304 HK1500 ...................................... B30
CCMT090304 THM ............................................ B30
CCMT090304 TTR ............................................. B30
CCMT090304MU TN2000 ................................. B33
CCMT090304MU WM25CT ............................... B33
CCMT090304MU WP25CT ................................ B33
CCMT090308 HK1500 ...................................... B30
CCMT090308 THM ............................................ B30
CCMT090308 TTR ............................................. B30
CCMT090308MU TN7115 ................................. B33
CCMT090308MU WM25CT ............................... B33
CCMT090308MU WP15CT ................................ B33
CCMT090308MU WP25CT ................................ B33
CCMT09T3021P TN10U .................................. B123
CCMT09T3021P TN15U .................................. B123
CCMT09T302FP WM25CT ................................. B31
CCMT09T302FP WP25CT .................................. B31
CCMT09T304 HK1500 ...................................... B30
CCMT09T304 THM ............................................ B30
CCMT09T3041P TN10P................................... B123
CCMT09T3041P TN10U .................................. B123
CCMT09T3041P TN15M .................................. B123
CCMT09T3041P TN15U .................................. B123
CCMT09T3041P TN20K................................... B123
CCMT09T3041P TN20P................................... B123
CCMT09T3041P TN30M .................................. B123
CCMT09T304FP WK20CT .................................. B31
CCMT09T304FP WM15CT ................................. B31
CCMT09T304FP WM25CT ................................. B31
CCMT09T304FP WP15CT .................................. B31
CCMT09T304FP WP25CT .................................. B31
CCMT09T304FP WS10PT .................................. B31
CCMT09T304FP WS25PT .................................. B31
CCMT09T304FW WM15CT ................................ B32
CCMT09T304FW WP15CT ................................. B32
CCMT09T304MP WK20CT ................................. B32
CCMT09T304MP WM15CT ................................ B32
CCMT09T304MP WM25CT ................................ B32
CCMT09T304MP WP15CT ................................. B32
CCMT09T304MP WP25CT ................................. B32
CCMT09T304MP WS10PT ................................. B32
CCMT09T304MU TN2000 ................................. B33
CCMT09T304MU WK05CT ................................ B33
CCMT09T304MU WK20CT ................................ B33
CCMT09T304MU WM25CT ................................ B33
CCMT09T304MU WP15CT ................................ B33
CCMT09T304MU WP25CT ................................ B33
CCMT09T304MU WS10PT ................................. B33
CCMT09T304MU WS25PT ................................. B33
CCMT09T304MW WP15CT................................ B33
CCMT09T304MW WP25CT................................ B33
CCMT09T308 HK1500 ...................................... B30
CCMT09T308 THM ............................................ B30
CCMT09T3081P TN10P................................... B123
CCMT09T3081P TN10U .................................. B123
CCMT09T3081P TN15M .................................. B123
CCMT09T3081P TN15U .................................. B123
CCMT09T3081P TN20K................................... B123
CCMT09T3081P TN20P................................... B123
CCMT09T3081P TN30M .................................. B123
CCMT09T308FP WK20CT .................................. B31
CCMT09T308FP WM15CT ................................. B31
CCMT09T308FP WM25CT ................................. B31
CCMT09T308FP WP15CT .................................. B31
CCMT09T308FP WP25CT .................................. B31
CCMT09T308FP WS25PT .................................. B31
CCMT09T308FW WP15CT ................................. B32
CCMT09T308MP WK20CT ................................. B32
CCMT09T308MP WM15CT ................................ B32
CCMT09T308MP WM25CT ................................ B32
CCMT09T308MP WP15CT ................................. B32
CCMT09T308MP WP25CT ................................. B32
CCMT09T308MP WS10PT ................................. B32
CCMT09T308MU SPN3W1 ................................ B33
CCMT09T308MU WK20CT ................................ B33
CCMT09T308MU WM25CT ................................ B33
CCMT09T308MU WP15CT ................................ B33
CCMT09T308MU WP25CT ................................ B33
CCMT09T308MU WP35CT ................................ B33
CCMT09T308MU WS10PT ................................. B33
CCMT09T308MU WS25PT ................................. B33
CCMT09T308MW WP15CT................................ B33
CCMT09T308MW WP25CT................................ B33
CCMT09T312 TN7125 ....................................... B30
CCMT09T312 TTR ............................................. B30
CCMT09T312MP WM25CT ................................ B32
CCMT09T312MP WP25CT ................................. B32
CCMT1204041P TN10P .................................. B123
CCMT1204041P TN10U .................................. B123
CCMT1204041P TN15M ................................. B123
CCMT1204041P TN20K .................................. B123
CCMT1204041P TN20P .................................. B123
CCMT1204041P TN30M ................................. B123
CCMT12040441 THM ........................................ B31
CCMT120404FP WK20CT .................................. B31
CCMT120404FP WM15CT ................................. B31
CCMT120404FP WM25CT ................................. B31
CCMT120404FP WP15CT .................................. B31
CCMT120404FP WP25CT .................................. B31
CCMT120404MW WP15CT ............................... B33
CCMT120404MW WP25CT ............................... B33
CCMT120408 THM ............................................ B30
CCMT120408 TTR ............................................. B30
CCMT1204081P TN10P .................................. B123
CCMT1204081P TN10U .................................. B123
CCMT1204081P TN15M ................................. B123
CCMT1204081P TN20K .................................. B123
CCMT1204081P TN20P .................................. B123
CCMT1204081P TN30M ................................. B123
CCMT12040841 THM ........................................ B31
CCMT120408FP WK20CT .................................. B31
CCMT120408FP WM15CT ................................. B31
CCMT120408FP WM25CT ................................. B31
CCMT120408FP WP15CT .................................. B31
CCMT120408FP WP25CT .................................. B31
CCMT120408MP WK20CT ................................ B32
CCMT120408MP WM15CT................................ B32
CCMT120408MP WM25CT................................ B32
CCMT120408MP WP15CT ................................ B32
CCMT120408MP WP25CT ................................ B32
CCMT120408MP WS10PT ................................. B32
CCMT120408MU TN5120 ................................. B33
CCMT120408MU WK20CT ................................ B33
CCMT120408MU WM25CT ............................... B33
CCMT120408MU WP15CT ................................ B33
CCMT120408MU WP25CT ................................ B33
CCMT120408MU WS25PT................................. B33
CCMT120408MW WP15CT ............................... B33
CCMT120408MW WP25CT ............................... B33
CCMT120412FP WK20CT .................................. B31
CCMT120412FP WM25CT ................................. B31
CCMT120412FP WP15CT .................................. B31
CCMT120412FP WP25CT .................................. B31
CCMT120412MP WK20CT ................................ B32
CCMT120412MP WM15CT................................ B32
CCMT120412MP WM25CT................................ B32
CCMT120412MP WP25CT ................................ B32
CCMW060202 THM ........................................... B34
CCMW060204 THM ........................................... B34
CCMW060204 WK05CT .................................... B34
CCMW060204 WK20CT .................................... B34
CCMW060204FST WDN25U ............................ B199
CCMW060208FST WDN25U ............................ B199
CCMW090302 THM ........................................... B34
CCMW090304 THM ........................................... B34
CCMW090304 WK05CT .................................... B34
CCMW090304 WK20CT .................................... B34
CCMW090308 WK05CT .................................... B34
CCMW090308 WK20CT .................................... B34
CCMW09T304 THM ........................................... B34
CCMW09T304 WK05CT .................................... B34
CCMW09T304 WK20CT .................................... B34
CCMW09T304FST WDN25U ............................ B199
CCMW09T308 THM ........................................... B34
CCMW09T308 WK05CT .................................... B34
CCMW09T308 WK20CT .................................... B34
CCMW09T308FST WDN25U ............................ B199
CCMW120404 THM ........................................... B34
CCMW120404 WK05CT .................................... B34
CCMW120404 WK20CT .................................... B34
CCMW120408 THM ........................................... B34
CCMW120408 WK05CT .................................... B34
CCMW120408 WK20CT .................................... B34
CCPM6152225L WG ......................................... D26
CCPM6152225R WG ......................................... D26
CCPM61525L WG .............................................. D26
CCPM61525R WG .............................................D26
CCPM8152225L WG ......................................... D26
CCPM81525L WG .............................................. D26
CDG50252R CG5 ............................................... D55
CDG50302R CG5 ............................................... D55
CDG50302R CM1 .............................................. D55
CDHBS4T002 ALO ............................................. D42
CDHBS4T002 C25 ............................................. D42
CDHBS4T002 CG5 ............................................. D42
CDHBS4T002 CG6 ............................................. D42
CDHBS4T002 CM1 ............................................ D42
CDHBS4T002 TN7 ............................................. D42
CDHBS4T002FST WDN25U .............................. B199
CDHBS4T002M CBN6 ........................................ D42
CDHBS4T002M CPD1 ........................................ D42
CDHBS4T004 C25 ............................................. D42
CDHBS4T004 CG5 ............................................. D42
CDHBS4T004 CG6 ............................................. D42
CDHBS4T004 CM1 ............................................ D42
CDHBS4T004 TN7 ............................................. D42
CDHBS4T004FST WDN25U .............................. B199
CDHBS4T004M CPD1 ........................................ D42
CDHBS4T0X0 C25 ............................................. D42
CDHBS4T0X0 CG5 ............................................. D42
CDHBS4T0X0 CG6 ............................................. D42
CDHBS4T0X0 CM1 ............................................ D42
CDHBS4T0X0M CBN6 ........................................ D42
CDHHS4T002 CG5 ............................................. D44
CDHHS4T002 CM1 ............................................ D44
CDHHS4T002L CG5 .....................................D43–44
CDHHS4T002L CG6 .....................................D43–44
CDHHS4T002L CM1 ....................................D43–44
CDHHS4T002R CG5.....................................D43–44
CDHHS4T002R CM1 ....................................D43–44
CDHHS4T004 CG5 ............................................. D44
CDHHS4T004L CG5 .....................................D43–44
CDHHS4T004R CG5.....................................D43–44
CDJNL2525M15MN7 WG .................................. C33
CDJNL2525M15MX7 WG .................................. C32
CDJNL3225P15MN7 WG ................................... C33
CDJNR2525M15MN7 WG .................................. C33
CDJNR2525M15MX7 WG .................................. C32
CDJNR3225P15MN7 WG ................................... C33
CDT50022R CG5 ............................................... D56
CELNL2525M13MF7 WG ................................... C33
CELNL2525M13MN7 WG .................................. C34
CELNR2525M13MF7 WG................................... C33
CELNR2525M13MN7 WG .................................. C34
CKC3 ....................................................F71–72, F77
CKC4 ....................................................F71–72, F77
CKC5 ........................................................... F71–72
CKEY WG ...........................................D59, D71, D84
CKJNL2525M16 WG .......................................... C34
CKJNL3225P16 WG ........................................... C34
CKJNR2525M16 WG ......................................... C34
CKJNR3225P16 WG .......................................... C34
CKM10 ................................................C36–39, C65
CKM13 .............................................................. C37
CKM19 ................................................C38–39, C65
CKM20 ............................................................ C108
CKM34 .....................C92–94, C96–103, C106–109
CKM35 ......................... C94, C97, C101–103, C109
CKM36 ..............................................C92, C95–101
CKM37 ........................................................C97–99
CKM38 ............................................................ C102
CKM41 .............................................................. C95
CKM7 ..........................................................C36–37
CKM9 ..........................................................C36–39
CM-72 ..................................................F28–29, F34
CM109 .......................................................E79, F32
CM146 .........................................E78, F31, F34–35
CM147 .........................................E78, F31, F34–35
CM182 .......................................................E75, F26
CM183 .......................................................E75, F26
CM184LP ...................................................E75, F26
CM185LP ...................................................E75, F26
CM209R ASSY ........................ C8–10, C12–16, C56
CM210R ASSY .................................C8–10, C12–15
CM214 ........................................................C40–41
CM215R ASSY .....................................C17–18, C58
CM216 ........................................................C40–41
CM219 ........................................................C40–41
CM234R ASSY ........................ C8–16, C19, C56–59
CM234RLP ASSY .........................................C56–59
CM235R ASSY ................................................... C17
CM236R ASSY .....................................C9, C12, C14
CM72LP ..................... E74, E76, E78, F24, F27, F31
CM73 ...................................................F28–29, F34
CM73LP ..................... E74, E76, E78, F25, F27, F31
CM74 ........... E74, E76, E78, F24, F27–29, F31, F34
CM75 ........... E74, E76, E78, F25, F27–29, F31, F34
CM80 .................................................E76, F24, F27
CM81 ......................................... E74, E76, F25, F27
CNGA120404EFWMT WBH25P ........................ B201
CNGA120404FST WDN00U ............................. B200
CNGA120404FST WDN25U ............................. B200
CNGA120404S01025MT WBH10P .................. B201
CNGA120404S01025MT WBH25P .................. B201
CNGA120404S01025MT WBH30P .................. B201
CNGA120404T02020 CW2015 ....................... B178
CNGA120408EFWMT WBH25P ........................ B201
CNGA120408EMT WBH25P ............................. B200
CNGA120408FST WDN00U ............................. B200
CNGA120408FST WDN25U ............................. B200
CNGA120408S01025FWMT WBH10P ............. B201
Catalogue No. Page(s) Catalogue No. Page(s) Catalogue No. Page(s)
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 92 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRANDO b 28 20153 09PM
Z93
widia.com
Index by Catalogue Number
Catalogue No. Page(s)
CNGA120408S01025MT WBH10P .................. B201
CNGA120408S01025MT WBH25P .................. B201
CNGA120408S01025MT WBH30P .................. B201
CNGA120408T01020FW CW5025 .................. B178
CNGA120408T02020 CW2015 ....................... B178
CNGA120408T02020 CW5025 ....................... B178
CNGA120412EMT WBH25P ............................. B200
CNGA120412S01020MT WBH30P .................. B201
CNGA120412S01025MT WBH10P .................. B201
CNGA120412S01025MT WBH25P .................. B201
CNGA120412S01025MT WBH30P .................. B201
CNGA120412T01020FW CW5025 .................. B178
CNGA120412T02020 CW2015 ....................... B178
CNGA120412T02020 CW5025 ....................... B178
CNGA120416T01020FW CW5025 .................. B178
CNGA120416T02020 CW5025 ....................... B178
CNGA160612T02020 CW2015 ....................... B178
CNGA160612T02020 CW5025 ....................... B178
CNGA160616T02020 CW5025 ....................... B178
CNGA190612T02020 CW2015 ....................... B178
CNGA190612T02020 CW5025 ....................... B178
CNGA190616T02020 CW2015 ....................... B178
CNGG120401FS WS10PT .................................. B35
CNGG120402FS WS10PT .................................. B35
CNGG120404FS WS10PT .................................. B35
CNGG120404FS WS25PT .................................. B35
CNGG120404FS WU10HT .................................. B35
CNGG120408FS WS10PT .................................. B35
CNGG120408FS WS25PT .................................. B35
CNGG120408FS WU10HT .................................. B35
CNGG120412FS WS10PT .................................. B35
CNGN120404T02020 CW2015 ....................... B177
CNGN120408T01020 CW3020 ....................... B177
CNGN120408T02020 CW2015 ....................... B177
CNGN120408T02020 CW5025 ....................... B177
CNGN120412T01020 CW3020 ....................... B177
CNGN120412T02020 CW2015 ....................... B177
CNGN120412T02020 CW5025 ....................... B177
CNGN120416T01020 CW3020 ....................... B177
CNGN120416T02020 CW2015 ....................... B177
CNGN120416T02020 CW5025 ....................... B177
CNGN120712T01020 CW3020 ....................... B177
CNGN120712T02020 CW2015 ....................... B177
CNGN120712T02020 CW5025 ....................... B177
CNGN120716T01020 CW3020 ....................... B177
CNGP120401 TN10U ............................... B35, B124
CNGP120401 WS10PT ...................................... B35
CNGP120402 TN10U ............................... B35, B124
CNGP120402 WS10PT ...................................... B35
CNGP120402 WU10HT ...................................... B35
CNGP120404 TN10U ............................... B35, B124
CNGP120404 TN15U ....................................... B124
CNGP120404 WS10PT ...................................... B35
CNGP120404 WU10HT ...................................... B35
CNGP120408 TN10U ............................... B35, B124
CNGP120408 TN15U ....................................... B124
CNGP120408 WS10PT ...................................... B35
CNGP120408 WU10HT ...................................... B35
CNGP120412 TN10U ....................................... B124
CNGP120412 TN15U ....................................... B124
CNGX120708T02020 CW5025 ....................... B179
CNGX120712T01020FW CW5025 .................. B179
CNGX120712T02020 CW5025 ....................... B179
CNGX160716T02020 CW5025 ....................... B179
CNMA120404 HK1500 ...................................... B36
CNMA120404 TN20K ...................................... B125
CNMA120404 WK05CT ..................................... B36
CNMA120404 WK20CT ..................................... B36
CNMA120408 HK1500 ...................................... B36
CNMA120408 TN20K ...................................... B125
CNMA120408 WK05CT ..................................... B36
CNMA120408 WK20CT ..................................... B36
CNMA120408S02020 WBK40U ....................... B202
CNMA120412 HK1500 ...................................... B36
CNMA120412 TN20K ...................................... B125
CNMA120412 WK05CT ..................................... B36
CNMA120412 WK20CT ..................................... B36
CNMA120412S02020 WBK40U ....................... B202
CNMA120416 TN20K .............................. B36, B125
CNMA120416 WK05CT ..................................... B36
CNMA120416 WK20CT ..................................... B36
CNMA160608 WK20CT ..................................... B36
CNMA160612 TN20K .............................. B36, B125
CNMA160612 WK05CT ..................................... B36
CNMA160612 WK20CT ..................................... B36
CNMA160616 TN20K .............................. B36, B125
CNMA160616 WK05CT ..................................... B36
CNMA160616 WK20CT ..................................... B36
CNMA190608 WK05CT ..................................... B36
CNMA190608 WK20CT ..................................... B36
CNMA190612 TN20K .............................. B36, B125
CNMA190612 WK05CT ..................................... B36
CNMA190612 WK20CT ..................................... B36
CNMA190616 TN20K .............................. B36, B125
CNMA190616 WK05CT ..................................... B36
CNMA190616 WK20CT ..................................... B36
CNMG0903086P TN10P .................................. B127
CNMG0903086P TN15M ................................. B127
CNMG0903086P TN20P .................................. B127
CNMG0903086P TN30M ................................. B127
CNMG120404 HK1500 ...................................... B37
CNMG120404 THM ........................................... B37
CNMG12040422 TN2000 .................................. B37
CNMG12040422 TTI15 ...................................... B37
CNMG1204042P TN10P .................................. B126
CNMG1204042P TN10U .................................. B126
CNMG1204042P TN15M ................................. B126
CNMG1204042P TN15U .................................. B126
CNMG1204042P TN20K .................................. B126
CNMG1204042P TN20P .................................. B126
CNMG1204042P TN30M ................................. B126
CNMG1204044P TN10U .................................. B126
CNMG1204044P TN15M ................................. B126
CNMG1204044P TN20P .................................. B126
CNMG1204044P TN30M ................................. B126
CNMG1204046P TN10P .................................. B127
CNMG1204046P TN15M ................................. B127
CNMG1204046P TN20P .................................. B127
CNMG1204046P TN30M ................................. B127
CNMG1204047N TN10P .................................. B128
CNMG1204047N TN20K .................................. B128
CNMG1204047N TN20P .................................. B128
CNMG120404FF WK20CT ................................. B37
CNMG120404FF WM25CT ................................ B37
CNMG120404FF WP15CT ................................. B37
CNMG120404FF WS10PT.................................. B37
CNMG120404FW WK05CT ................................ B38
CNMG120404FW WM15CT ............................... B38
CNMG120404FW WM25CT ............................... B38
CNMG120404ML WK05CT ................................ B38
CNMG120404ML WK20CT ................................ B38
CNMG120404ML WP15CT ................................ B38
CNMG120404ML WP25CT ................................ B38
CNMG120404MR WP15CT ................................ B39
CNMG120404MR WP25CT ................................ B39
CNMG120404MR WP35CT ................................ B39
CNMG120404MS WS10PT ................................ B40
CNMG120404MS WS25PT ................................ B40
CNMG120404MS WU10HT ................................ B40
CNMG120404UF WM15CT ................................ B42
CNMG120404UF WM25CT ................................ B42
CNMG120404UF WP15CT ................................. B42
CNMG120404UF WS10PT ................................. B42
CNMG120404UM WM15CT ............................... B42
CNMG120404UM WM25CT ............................... B42
CNMG120404UM WM35CT ............................... B42
CNMG120404UM WS10PT ................................ B42
CNMG120404UR WM15CT ................................ B43
CNMG120404UR WM25CT ................................ B43
CNMG120404UR WM35CT ................................ B43
CNMG120404UR WP15CT ................................. B43
CNMG120404UR WP25CT ................................. B43
CNMG120404UR WS10PT ................................. B43
CNMG120404UR WS25PT ................................. B43
CNMG120408 HK1500 ...................................... B37
CNMG120408 THM ........................................... B37
CNMG1204082P TN10P .................................. B126
CNMG1204082P TN10U .................................. B126
CNMG1204082P TN15M ................................. B126
CNMG1204082P TN15U .................................. B126
CNMG1204082P TN20K .................................. B126
CNMG1204082P TN20P .................................. B126
CNMG1204082P TN30M ................................. B126
CNMG1204084P TN10U .................................. B126
CNMG1204084P TN15M ................................. B126
CNMG1204084P TN20P .................................. B126
CNMG1204084P TN30M ................................. B126
CNMG1204086P TN10P .................................. B127
CNMG1204086P TN15M ................................. B127
CNMG1204086P TN20P .................................. B127
CNMG1204086P TN30M ................................. B127
CNMG1204086P TN30P .................................. B127
CNMG1204087N TN10P .................................. B128
CNMG1204087N TN20K .................................. B128
CNMG1204087N TN20P .................................. B128
CNMG1204087N TN30P .................................. B128
CNMG120408FF WK20CT ................................. B37
CNMG120408FF WM25CT ................................ B37
CNMG120408FF WP15CT ................................. B37
CNMG120408FF WS10PT.................................. B37
CNMG120408FW WK05CT ................................ B38
CNMG120408FW WM15CT ............................... B38
CNMG120408FW WM25CT ............................... B38
CNMG120408FW WP15CT ................................ B38
CNMG120408ML WK05CT ................................ B38
CNMG120408ML WK20CT ................................ B38
CNMG120408ML WP15CT ................................ B38
CNMG120408ML WP25CT ................................ B38
CNMG120408MR WM25CT ............................... B39
CNMG120408MR WM35CT ............................... B39
CNMG120408MR WP15CT ................................ B39
CNMG120408MR WP25CT ................................ B39
CNMG120408MR WP35CT ................................ B39
CNMG120408MS WS10PT ................................ B40
CNMG120408MS WS25PT ................................ B40
CNMG120408MS WU10HT ................................ B40
CNMG120408MW WK05CT ............................... B40
CNMG120408MW WM25CT .............................. B40
CNMG120408RH WK20CT ................................. B41
CNMG120408RH WM25CT ................................ B41
CNMG120408RH WP15CT ................................. B41
CNMG120408RH WP25CT ................................. B41
CNMG120408RH WP35CT ................................. B41
CNMG120408UF WM15CT ................................ B42
CNMG120408UF WM25CT ................................ B42
CNMG120408UF WS10PT ................................. B42
CNMG120408UM WM15CT ............................... B42
CNMG120408UM WM25CT ............................... B42
CNMG120408UM WM35CT ............................... B42
CNMG120408UM WP15CT ................................ B42
CNMG120408UM WP25CT ................................ B42
CNMG120408UR WK05CT ................................. B43
CNMG120408UR WK20CT ................................. B43
CNMG120408UR WM15CT ................................ B43
CNMG120408UR WM25CT ................................ B43
CNMG120408UR WM35CT ................................ B43
CNMG120408UR WP15CT ................................. B43
CNMG120408UR WP25CT ................................. B43
CNMG120408UR WP35CT ................................. B43
CNMG120408UR WS10PT ................................. B43
CNMG120408UR WS25PT ................................. B43
CNMG1204122P TN10P .................................. B126
CNMG1204122P TN10U .................................. B126
CNMG1204122P TN15M ................................. B126
CNMG1204122P TN20K .................................. B126
CNMG1204122P TN20P .................................. B126
CNMG1204124P TN10U .................................. B126
CNMG1204124P TN15M ................................. B126
CNMG1204124P TN20P .................................. B126
CNMG1204124P TN30M ................................. B126
CNMG1204126P TN10P .................................. B127
CNMG1204126P TN15M ................................. B127
CNMG1204126P TN20P .................................. B127
CNMG1204126P TN30M ................................. B127
CNMG1204126P TN30P .................................. B127
CNMG1204127N TN10P .................................. B128
CNMG1204127N TN20K .................................. B128
CNMG1204127N TN20P .................................. B128
CNMG1204127N TN30P .................................. B128
CNMG120412FF WK20CT ................................. B37
CNMG120412FF WM25CT ................................ B37
CNMG120412FF WP15CT ................................. B37
CNMG120412FW WK05CT ................................ B38
CNMG120412FW WM15CT ............................... B38
CNMG120412FW WM25CT ............................... B38
CNMG120412FW WP15CT ................................ B38
CNMG120412ML WK05CT ................................ B38
CNMG120412ML WK20CT ................................ B38
CNMG120412ML WP15CT ................................ B38
CNMG120412ML WP25CT ................................ B38
CNMG120412MR WM25CT ............................... B39
CNMG120412MR WM35CT ............................... B39
CNMG120412MR WP15CT ................................ B39
CNMG120412MR WP25CT ................................ B39
CNMG120412MR WP35CT ................................ B39
CNMG120412MS WS10PT ................................ B40
CNMG120412MS WS25PT ................................ B40
CNMG120412MS WU10HT ................................ B40
CNMG120412MW WK05CT ............................... B40
CNMG120412MW WM25CT .............................. B40
CNMG120412RH WK20CT ................................. B41
CNMG120412RH WM25CT ................................ B41
CNMG120412RH WP15CT ................................. B41
CNMG120412RH WP25CT ................................. B41
CNMG120412RH WP35CT ................................. B41
CNMG120412UF WM15CT ................................ B42
CNMG120412UF WM25CT ................................ B42
CNMG120412UM WM15CT ............................... B42
CNMG120412UM WM25CT ............................... B42
CNMG120412UM WM35CT ............................... B42
CNMG120412UM WS10PT ................................ B42
CNMG120412UR WK05CT ................................. B43
Catalogue No. Page(s) Catalogue No. Page(s) Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 93 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRAND O b 28 2015 3 09 PM
Z94 widia.com
Index by Catalogue Number
Index
Catalogue No. Page(s)
CNMG120412UR WK20CT ................................. B43
CNMG120412UR WM15CT ................................ B43
CNMG120412UR WM25CT ................................ B43
CNMG120412UR WM35CT ................................ B43
CNMG120412UR WP15CT ................................. B43
CNMG120412UR WP25CT ................................. B43
CNMG120412UR WP35CT ................................. B43
CNMG120412UR WS10PT ................................. B43
CNMG120412UR WS25PT ................................. B43
CNMG1204167N TN10P .................................. B128
CNMG1204167N TN20K .................................. B128
CNMG1204167N TN20P .................................. B128
CNMG120416ML WK20CT ................................ B38
CNMG120416ML WP25CT ................................ B38
CNMG120416MR WM25CT ............................... B39
CNMG120416MR WM35CT ............................... B39
CNMG120416MR WP15CT ................................ B39
CNMG120416MR WP25CT ................................ B39
CNMG120416MS WS10PT ................................ B40
CNMG120416MS WS25PT ................................ B40
CNMG120416MS WU10HT ................................ B40
CNMG120416RH WK20CT ................................. B41
CNMG120416RH WM25CT ................................ B41
CNMG120416RH WP15CT ................................. B41
CNMG120416RH WP25CT ................................. B41
CNMG120416RH WP35CT ................................. B41
CNMG120416UR WK20CT ................................. B43
CNMG120416UR WM15CT ................................ B43
CNMG120416UR WM25CT ................................ B43
CNMG120416UR WM35CT ................................ B43
CNMG120416UR WP15CT ................................. B43
CNMG120416UR WP25CT ................................. B43
CNMG120416UR WS10PT ................................. B43
CNMG120416UR WS25PT ................................. B43
CNMG160608MR WM25CT ............................... B39
CNMG160608MR WM35CT ............................... B39
CNMG160608MR WP15CT ................................ B39
CNMG160608MR WP25CT ................................ B39
CNMG160608MS WS10PT ................................ B40
CNMG160608MS WS25PT ................................ B40
CNMG160608MS WU10HT ................................ B40
CNMG160608RH WK20CT ................................. B41
CNMG160608RH WM25CT ................................ B41
CNMG160608RH WP15CT ................................. B41
CNMG160608RH WP25CT ................................. B41
CNMG160608RH WP35CT ................................. B41
CNMG160608UR WK20CT ................................. B43
CNMG160608UR WM15CT ................................ B43
CNMG160608UR WM25CT ................................ B43
CNMG160608UR WM35CT ................................ B43
CNMG160608UR WP15CT ................................. B43
CNMG160608UR WP25CT ................................. B43
CNMG160608UR WS10PT ................................. B43
CNMG160608UR WS25PT ................................. B43
CNMG1606124P TN15M ................................. B126
CNMG1606124P TN30M ................................. B126
CNMG1606126P TN15M ................................. B127
CNMG1606126P TN20P .................................. B127
CNMG1606126P TN30M ................................. B127
CNMG1606126P TN30P .................................. B127
CNMG1606127N TN10P .................................. B128
CNMG1606127N TN20K .................................. B128
CNMG1606127N TN20P .................................. B128
CNMG1606127N TN30P .................................. B128
CNMG160612MR WM25CT ............................... B39
CNMG160612MR WM35CT ............................... B39
CNMG160612MR WP15CT ................................ B39
CNMG160612MR WP25CT ................................ B39
CNMG160612MR WP35CT ................................ B39
CNMG160612MS WS10PT ................................ B40
CNMG160612MS WS25PT ................................ B40
CNMG160612MS WU10HT ................................ B40
CNMG160612RH WK20CT ................................. B41
CNMG160612RH WM25CT ................................ B41
CNMG160612RH WP15CT ................................. B41
CNMG160612RH WP25CT ................................. B41
CNMG160612RH WP35CT ................................. B41
CNMG160612UR WK20CT ................................. B43
CNMG160612UR WM15CT ................................ B43
CNMG160612UR WM25CT ................................ B43
CNMG160612UR WM35CT ................................ B43
CNMG160612UR WP15CT ................................. B43
CNMG160612UR WP25CT ................................. B43
CNMG160612UR WP35CT ................................. B43
CNMG160612UR WS10PT ................................. B43
CNMG1606167N TN10P .................................. B128
CNMG1606167N TN20K .................................. B128
CNMG1606167N TN20P .................................. B128
CNMG160616MR WM25CT ............................... B39
CNMG160616MR WM35CT ............................... B39
CNMG160616MR WP15CT ................................ B39
CNMG160616MR WP25CT ................................ B39
CNMG160616MR WP35CT ................................ B39
CNMG160616RH WK20CT ................................. B41
CNMG160616RH WM25CT ................................ B41
CNMG160616RH WP15CT ................................. B41
CNMG160616RH WP25CT ................................. B41
CNMG160616RH WP35CT ................................. B41
CNMG160616UR WK20CT ................................. B43
CNMG160616UR WM25CT ................................ B43
CNMG160616UR WM35CT ................................ B43
CNMG160616UR WP15CT ................................. B43
CNMG160616UR WP25CT ................................. B43
CNMG160616UR WP35CT ................................. B43
CNMG160616UR WS10PT ................................. B43
CNMG160616UR WS25PT ................................. B43
CNMG1906087N TN10P .................................. B128
CNMG1906087N TN20K .................................. B128
CNMG190608MS WS10PT ................................ B40
CNMG190608MS WS25PT ................................ B40
CNMG190608MS WU10HT ................................ B40
CNMG190608RH WK20CT ................................. B41
CNMG190608RH WM25CT ................................ B41
CNMG190608RH WP15CT ................................. B41
CNMG190608RH WP25CT ................................. B41
CNMG190608RH WP35CT ................................. B41
CNMG190612 HK1500 ...................................... B37
CNMG190612 THM ........................................... B37
CNMG1906124P TN15M ................................. B126
CNMG1906124P TN30M ................................. B126
CNMG1906126P TN15M ................................. B127
CNMG1906126P TN20P .................................. B127
CNMG1906126P TN30M ................................. B127
CNMG1906126P TN30P .................................. B127
CNMG1906127N TN10P .................................. B128
CNMG1906127N TN20K .................................. B128
CNMG1906127N TN20P .................................. B128
CNMG1906127N TN30P .................................. B128
CNMG190612MR WM25CT ............................... B39
CNMG190612MR WM35CT ............................... B39
CNMG190612MR WP15CT ................................ B39
CNMG190612MR WP25CT ................................ B39
CNMG190612MR WP35CT ................................ B39
CNMG190612MS WS10PT ................................ B40
CNMG190612MS WS25PT ................................ B40
CNMG190612MS WU10HT ................................ B40
CNMG190612RH WK20CT ................................. B41
CNMG190612RH WM25CT ................................ B41
CNMG190612RH WP15CT ................................. B41
CNMG190612RH WP25CT ................................. B41
CNMG190612RH WP35CT ................................. B41
CNMG190612UR WK05CT ................................. B43
CNMG190612UR WK20CT ................................. B43
CNMG190612UR WM15CT ................................ B43
CNMG190612UR WM25CT ................................ B43
CNMG190612UR WM35CT ................................ B43
CNMG190612UR WP15CT ................................. B43
CNMG190612UR WP25CT ................................. B43
CNMG190612UR WP35CT ................................. B43
CNMG190612UR WS10PT ................................. B43
CNMG190612UR WS25PT ................................. B43
CNMG190616 HK1500 ...................................... B37
CNMG190616 THM ........................................... B37
CNMG1906167N TN10P .................................. B128
CNMG1906167N TN20K .................................. B128
CNMG1906167N TN20P .................................. B128
CNMG1906167N TN30P .................................. B128
CNMG190616MR WM25CT ............................... B39
CNMG190616MR WM35CT ............................... B39
CNMG190616MR WP15CT ................................ B39
CNMG190616MR WP25CT ................................ B39
CNMG190616MR WP35CT ................................ B39
CNMG190616MS WS10PT ................................ B40
CNMG190616MS WS25PT ................................ B40
CNMG190616MS WU10HT ................................ B40
CNMG190616RH WK20CT ................................. B41
CNMG190616RH WM25CT ................................ B41
CNMG190616RH WP15CT ................................. B41
CNMG190616RH WP25CT ................................. B41
CNMG190616RH WP35CT ................................. B41
CNMG190616UR WK20CT ................................. B43
CNMG190616UR WM15CT ................................ B43
CNMG190616UR WM25CT ................................ B43
CNMG190616UR WM35CT ................................ B43
CNMG190616UR WP15CT ................................. B43
CNMG190616UR WP25CT ................................. B43
CNMG190616UR WP35CT ................................. B43
CNMG190616UR WS10PT ................................. B43
CNMG190616UR WS25PT ................................. B43
CNMG190624RH WM25CT ................................ B41
CNMG190624RH WP15CT ................................. B41
CNMG190624RH WP25CT ................................. B41
CNMG190624RH WP35CT ................................. B41
CNMG2509247N TN30P .................................. B128
CNMM12040865 TN7025 ................................. B44
CNMM12040865 WM25CT ............................... B44
CNMM12040865 WP15CT ................................ B44
CNMM12040865 WP25CT ................................ B44
CNMM12040865 WP35CT ................................ B44
CNMM12041265 TN7115 ................................. B44
CNMM12041265 WM25CT ............................... B44
CNMM12041265 WP15CT ................................ B44
CNMM12041265 WP25CT ................................ B44
CNMM12041665 WM25CT ............................... B44
CNMM12041665 WP25CT ................................ B44
CNMM16060865 TN7125 ................................. B44
CNMM16060865 WP25CT ................................ B44
CNMM16060865 WP35CT ................................ B44
CNMM16061265 TN7125 ................................. B44
CNMM16061265 WM25CT ............................... B44
CNMM16061265 WP15CT ................................ B44
CNMM16061265 WP25CT ................................ B44
CNMM16061265 WP35CT ................................ B44
CNMM16061665 TN7025 ................................. B44
CNMM16061665 WP15CT ................................ B44
CNMM16061665 WP25CT ................................ B44
CNMM19061265 TN7125 ................................. B44
CNMM19061265 WM25CT ............................... B44
CNMM19061265 WP35CT ................................ B44
CNMM19061665 TN8025 ................................. B44
CNMM19061665 WM25CT ............................... B44
CNMM19061665 WP15CT ................................ B44
CNMM190616SR TN7015 ................................. B44
CNMM190616SR WM25CT ............................... B44
CNMM190616SR WP15CT ................................ B44
CNMM19062465 WM25CT ............................... B44
CNMM19062465 WP15CT ................................ B44
CNMM19062465 WP25CT ................................ B44
CNMM190624SR TN7115 ................................. B44
CNMM190624SR WP35CT ................................ B44
CNMM250924SR TN7025 ................................. B44
CNMM250924SR WP15CT ................................ B44
CNMM250924SR WP25CT ................................ B44
CNMM250924SR WP35CT ................................ B44
CNMN090312S02020 WBK40U ...................... B202
CNMN120408S02020 WBK40U ...................... B202
CNMN120412S02020 WBK40U ...................... B202
CNMP120404 WM15CT .................................... B45
CNMP120404 WM25CT .................................... B45
CNMP120404 WM35CT .................................... B45
CNMP120404 WS10PT ..................................... B45
CNMP120408 WM15CT .................................... B45
CNMP120408 WM25CT .................................... B45
CNMP120408 WM35CT .................................... B45
CNMP120408 WS10PT ..................................... B45
CNMP120408 WS25PT ..................................... B45
CNMP120412 WM15CT .................................... B45
CNMP120412 WM25CT .................................... B45
CNMP120412 WM35CT .................................... B45
CNMP120412 WS10PT ..................................... B45
CNMP120412 WS25PT ..................................... B45
CNMP160608 WM15CT .................................... B45
CNMP160608 WM25CT .................................... B45
CNMP160608 WM35CT .................................... B45
CNMP160612 WM15CT .................................... B45
CNMP160612 WM25CT .................................... B45
CNMP160612 WM35CT .................................... B45
CNMP160612 WS10PT ..................................... B45
CNMP190612 WS10PT ..................................... B45
CNMP190616 WM15CT .................................... B45
CNMP190616 WM25CT .................................... B45
CNMP190616 WM35CT .................................... B45
CNMS120408FST WDN25U ............................. B202
CPG2032R CG5 ................................................. D55
CPG2062R CG5 ................................................. D55
CPGN120304F WDN25U ................................. B203
CPGN120308F WDN25U ................................. B203
CPGT04T1043 TN35.......................................... B45
CPGT04T1043 TTR ............................................ B45
CPGW060202EC WBH25P ............................... B203
CPGW060202FST WDN25U ............................. B204
CPGW060202S01015C WBH10P .................... B203
CPGW060202S01015C WBH30P .................... B203
CPGW060204FST WDN25U ............................. B204
CPGW060204FWST WDN00U.......................... B204
CPGW060204FWST WDN25U.......................... B204
CPGW060204S01015C WBH10P .................... B203
CPGW060204S01015C WBH25P .................... B203
CPGW060204S01015C WBH30P .................... B203
CPGW060208FST WDN25U ............................. B204
CPGW060208S01015C WBH25P .................... B203
CPGW09T304FST WDN25U ............................. B204
Catalogue No. Page(s) Catalogue No. Page(s) Catalogue No. Page(s)
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 94 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRANDO b 28 20153 09PM
Z95
widia.com
Index by Catalogue Number
Catalogue No. Page(s)
CPGW09T304S01015C WBH25P .................... B203
CPGW09T304S01015MT WBH10P .................. B205
CPGW09T304S01015MT WBH30P .................. B205
CPGW09T308FST WDN25U ............................. B204
CPGW09T308FWST WDN00U .......................... B204
CPGW09T308FWST WDN25U .......................... B204
CPGW09T308S01015C WBH25P .................... B203
CPGW09T308S01015MT WBH10P .................. B205
CPGW09T308S01015MT WBH30P .................. B205
CPGW120404FST WDN25U ............................. B204
CPGW120408FST WDN25U ............................. B204
CPGW120408FWST WDN00U.......................... B204
CPGW120408FWST WDN25U.......................... B204
CPHB06T102 CG5 ............................................. D44
CPHB06T104 CG5 ............................................. D44
CPHH06T102 CG5 ............................................. D45
CPHH06T102 CG6 ............................................. D45
CPHH06T102 CM1 ............................................ D45
CPHH06T104 CG5 ............................................. D45
CPMT060202FP WM25CT ................................. B46
CPMT060202FP WP15CT .................................. B46
CPMT060202FP WP25CT .................................. B46
CPMT060204FP WK20CT .................................. B46
CPMT060204FP WM15CT ................................. B46
CPMT060204FP WM25CT ................................. B46
CPMT060204FP WP15CT .................................. B46
CPMT060204FP WP25CT .................................. B46
CPMT060208FP WK20CT .................................. B46
CPMT060208FP WM15CT ................................. B46
CPMT060208FP WM25CT ................................. B46
CPMT060208FP WP15CT .................................. B46
CPMT060208FP WP25CT .................................. B46
CPMT060208MP WP15CT ................................. B46
CPMT060208MP WP25CT ................................. B46
CPMT09T302FP WM25CT ................................. B46
CPMT09T302LF CG5 ......................................... D45
CPMT09T304FP WK20CT .................................. B46
CPMT09T304FP WM15CT ................................. B46
CPMT09T304FP WM25CT ................................. B46
CPMT09T304FP WP15CT .................................. B46
CPMT09T304FP WP25CT .................................. B46
CPMT09T304LF CG5 ......................................... D45
CPMT09T308FP WK20CT .................................. B46
CPMT09T308FP WM15CT ................................. B46
CPMT09T308FP WM25CT ................................. B46
CPMT09T308FP WP15CT .................................. B46
CPMT09T308FP WP25CT .................................. B46
CPMT09T308LF CG5 ......................................... D45
CPMT09T308MP WK20CT ................................. B46
CPMT09T308MP WM15CT ................................ B46
CPMT09T308MP WM25CT ................................ B46
CPMT09T308MP WP15CT ................................. B46
CPMT09T308MP WP25CT ................................. B46
CPMT09T312MP WK20CT ................................. B46
CPMT09T312MP WM15CT ................................ B46
CPMT09T312MP WP25CT ................................. B46
CPMW050204FST WDN25U ............................ B205
CPMW060204FST WDN25U ............................ B205
CPMW09T304FWST WDN25U ......................... B205
CPNT060204T WK15CM ......................................L5
CPNT060204T WP35CM ......................................L5
CPNT060204T WP40PM.......................................L5
CPNT080308T THM ..............................................L5
CPNT080308T WK15CM ......................................L5
CPNT080308T WP35CM ......................................L5
CPNT09T308T TTM08 ..........................................L6
CPNT09T308T WK15CM ......................................L6
CPNT09T308T WP35CM ......................................L6
CPNT120408T TN7535 ........................................L6
CPNT120408T WK15CM ......................................L6
CPNT120408T WP35CM ......................................L6
CPT20052R CG5 ............................................... D56
CPT20052R CM1 ............................................... D56
CRDNN2525M12MN4 WG ................................. C35
CRDNN2525M12MN7 WG ................................. C35
CRDNN3225P12MN4 WG .................................. C35
CRDNN3225P12MN7 WG .................................. C35
CRDPN2525M06V WG ....................................... C40
CRDPN2525M09V WG ....................................... C40
CRDPN2525M12V WG ....................................... C40
CRDPN3232P09V WG ........................................ C40
CRDPN3232P12V WG ........................................ C40
CRGPL2525M06V WG ....................................... C41
CRGPL2525M09V WG ....................................... C41
CRGPL2525M12V WG ....................................... C41
CRGPL3232P09V WG ........................................ C41
CRGPL3232P12V WG ........................................ C41
CRGPR2525M06V WG ....................................... C41
CRGPR2525M09V WG ....................................... C41
CRGPR2525M12V WG ....................................... C41
CRGPR3232P09V WG ........................................ C41
CRSNL2525M12MN7 WG .................................. C35
CRSNL3225P12MN4 WG ................................... C35
CRSNL3225P12MN7 WG ................................... C35
CRSNR2525M12MN7 WG .................................. C35
CRSNR3225P12MN4 WG .................................. C35
CRSNR3225P12MN7 WG .................................. C35
CS412 ......................................................... C40–41
CSBM4510125L WG.......................................... D11
CSBM4510125R WG ......................................... D11
CSBM4512125L WG.......................................... D11
CSBM4512125R WG ......................................... D11
CSBM4512255L WG.......................................... D11
CSBM4657L WG ................................................ D10
CSBM4657R WG ............................................... D10
CSBM5210125R WG ......................................... D11
CSBM5210250R WG ......................................... D11
CSBM5210255R WG ......................................... D11
CSBM5212125L WG.......................................... D11
CSBM5212250R WG ......................................... D11
CSBM5212255R WG ......................................... D11
CSBM5650L WG ................................................ D10
CSBM5650R WG ............................................... D10
CSBM5655L WG ................................................ D10
CSBM5655R WG ............................................... D10
CSBM6410195L WG.......................................... D11
CSBM6410195R WG ......................................... D11
CSBM6412190R WG ......................................... D11
CSBM6412195L WG.......................................... D11
CSBM6412195R WG ......................................... D11
CSBM6412320R WG ......................................... D11
CSBM6412325L WG.......................................... D11
CSBM6412325R WG ......................................... D11
CSBM6650L WG ................................................ D10
CSBM6650R WG ............................................... D10
CSBM6655L WG ................................................ D10
CSBM6655R WG ............................................... D10
CSBM8760L WG ................................................ D10
CSBM8765L WG ................................................ D10
CSBM8765R WG ............................................... D10
CSBPL2020K12 WG .......................................... C36
CSBPR2020K12 WG .......................................... C36
CSBPR2525M12 WG ......................................... C36
CSDPN1616H09 WG .......................................... C36
CSDPN2020K12 WG .......................................... C36
CSDPN2525M12 WG ......................................... C36
CSKPR10CA09 WG .......................................... C106
CSKPR12CA12 WG .......................................... C106
CSM22156 WG .................................................. D29
CSM22187 WG .................................................. D29
CSM22250 WG .................................................. D29
CSM22312 WG .................................................. D29
CSM22375 WG .................................................. D29
CSM22500 WG .................................................. D29
CSMM6760R WG ............................................... D28
CSPM71225225L WG........................................ D25
CSPM71225225R WG ....................................... D25
CSPM712255L WG ............................................ D25
CSPM712255R WG ........................................... D25
CSPM81232225L WG........................................ D25
CSPM81232225R WG ....................................... D25
CSPM812325L WG ............................................ D25
CSRPR10CA09 WG .......................................... C107
CSRPR12CA12 WG .......................................... C107
CSSPL10CA09 WG .......................................... C108
CSSPL12CA12 WG .......................................... C108
CSSPL20CA12 WG .......................................... C108
CSSPL2525M12 WG .......................................... C37
CSSPR10CA09 WG .......................................... C108
CSSPR12CA12 WG .......................................... C108
CSSPR2020K12 WG .......................................... C37
CSSPR2525M12 WG ......................................... C37
CSWM 035 040 .................. C110, C113, C115–116
CSWM 040 050 ................... C110–111, C113–117,
C119, C126–129
CSWM 060 050 ..........................C92–94, C97–110,
C112–113, C118–129
CSWM 080 050 ..................... C92–105, C108–109,
C112, C120, C124
CSWM 100 080 ...................... C94, C97, C101–102
CT11 WG .................................. D23, D59, D71, D84
CT15 WG ............................ D25–26, D59, D71, D84
CTCPN2510M11 WG ......................................... C37
CTCPN2514M16 WG ......................................... C37
CTCPN2518M22 WG ......................................... C37
CTCPN2520M22 WG ......................................... C37
CTCPN4018R22 WG .......................................... C37
CTDPL1212F11 WG ........................................... C38
CTDPR1212F11 WG .......................................... C38
CTFPL12CA16 WG ........................................... C109
CTFPL2525M16 WG .......................................... C38
CTFPR10CA11 WG .......................................... C109
CTFPR12CA16 WG .......................................... C109
CTFPR2020K16 WG ........................................... C38
CTFPR20CA22 WG .......................................... C109
CTFPR2525M16 WG .......................................... C38
CTGPL1212F11 WG ........................................... C39
CTGPL2020K16 WG .......................................... C39
CTGPL2525M16 WG.......................................... C39
CTGPR1212F11 WG .......................................... C39
CTGPR1616H11 WG .......................................... C39
CTGPR2020K11 WG .......................................... C39
CTGPR2020K16 WG .......................................... C39
CTGPR2525M16 WG ......................................... C39
CTGPR2525M22 WG ......................................... C39
CV40BRFX185236 WG ..................................... W56
CV40BRFX245236 WG ..................................... W56
CV40BRFX320236 WG ..................................... W56
CV40BRFX420236 WG ..................................... W56
CV40BRFX550256 WG ..................................... W56
CV50BRFX320236 WG ..................................... W57
CV50BRFX420236 WG ..................................... W57
CV50BRFX550236 WG ..................................... W57
CV50BRFX720276 WG ..................................... W57
D0010300T004 TIALN ....................................... P19
D0010400T005 TIALN ....................................... P19
D0012000T020 TIALN ....................................... P19
D0020200T003 TIALN ....................................... P14
D0020200T003 UNCOATED............................... P14
D0020250T003 TIALN ....................................... P14
D0020250T003 UNCOATED............................... P14
D0020300T004 TIALN ....................................... P14
D0020300T004 UNCOATED............................... P14
D0020350T004 TIALN ....................................... P14
D0020350T004 UNCOATED............................... P14
D0020400T005 TIALN ....................................... P14
D0020400T005 UNCOATED............................... P14
D0020450T005 TIALN ....................................... P14
D0020450T005 UNCOATED............................... P14
D0020500T006 TIALN ....................................... P14
D0020500T006 UNCOATED............................... P14
D0020600T007 TIALN ....................................... P14
D0020600T007 UNCOATED............................... P14
D0020700T008 TIALN ....................................... P14
D0020700T008 UNCOATED............................... P14
D0020800T009 TIALN ....................................... P14
D0020800T009 UNCOATED............................... P14
D0020900T010 TIALN ....................................... P14
D0020900T010 UNCOATED............................... P14
D0021000T011 TIALN ....................................... P15
D0021000T011 UNCOATED............................... P15
D0021200T012 TIALN ....................................... P15
D0021200T012 UNCOATED............................... P15
D0021200W012 TIALN ...................................... P15
D0021200W012 UNCOATED ............................. P15
D0021400T014 TIALN ....................................... P15
D0021400T014 UNCOATED............................... P15
D0021400W014 TIALN ...................................... P15
D0021400W014 UNCOATED ............................. P15
D0021600T016 TIALN ....................................... P15
D0021600T016 UNCOATED............................... P15
D0021600W016 TIALN ...................................... P15
D0021600W016 UNCOATED ............................. P15
D0021800T018 TIALN ....................................... P15
D0021800T018 UNCOATED............................... P15
D0021800W018 TIALN ...................................... P15
D0021800W018 UNCOATED ............................. P15
D0022000T020 TIALN ....................................... P15
D0022000T020 UNCOATED............................... P15
D0022000W020 TIALN ...................................... P15
D0022000W020 UNCOATED ............................. P15
D0040200T004 TIALN ....................................... P32
D0040300T005 TIALN ....................................... P32
D0040400T008 TIALN ....................................... P32
D0040500T009 TIALN ....................................... P32
D0040600T010 TIALN ....................................... P32
D0040700T011 TIALN ....................................... P32
D0040800T012 TIALN ....................................... P32
D0040900T013 TIALN ....................................... P33
D0041000T014 TIALN ....................................... P33
D0041200T016 TIALN ....................................... P33
D0041200W016 TIALN ...................................... P33
D0041200W016 UNCOATED ............................. P33
D0041400T018 TIALN ....................................... P33
D0041400W018 TIALN ...................................... P33
D0041400W018 UNCOATED ............................. P33
D0041600T022 TIALN ....................................... P33
D0041600W022 TIALN ...................................... P33
D0041600W022 UNCOATED ............................. P33
D0041800T024 TIALN ....................................... P33
D0041800W024 TIALN ...................................... P33
D0041800W024 UNCOATED ............................. P33
Catalogue No. Page(s) Catalogue No. Page(s) Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 95 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRAND O b 28 2015 3 09 PM
Z96 widia.com
Index by Catalogue Number
Index
Catalogue No. Page(s)
D0042000T026 TIALN ....................................... P33
D0042000W026 TIALN ...................................... P33
D0042000W026 UNCOATED ............................. P33
D0100300T008 TIALN ....................................... P37
D0100300T008 UNCOATED............................... P37
D0100400T011 TIALN ....................................... P37
D0100400T011 UNCOATED............................... P37
D0100500T013 TIALN ....................................... P37
D0100500T013 UNCOATED............................... P37
D0100600T013 TIALN ....................................... P37
D0100600T013 UNCOATED............................... P37
D0100800T019 TIALN ....................................... P37
D0100800T019 UNCOATED............................... P37
D0101000T022 TIALN ....................................... P37
D0101000T022 UNCOATED............................... P37
D0101200T026 TIALN ....................................... P37
D0101200T026 UNCOATED............................... P37
D0101200W026 TIALN ...................................... P37
D0101200W026 UNCOATED ............................. P37
D0101400T026 TIALN ....................................... P37
D0101400T026 UNCOATED............................... P37
D0101400W026 TIALN ...................................... P37
D0101400W026 UNCOATED ............................. P37
D0101600T032 TIALN ....................................... P37
D0101600T032 UNCOATED............................... P37
D0101600W032 TIALN ...................................... P37
D0101600W032 UNCOATED ............................. P37
D0101800T032 TIALN ....................................... P37
D0101800T032 UNCOATED............................... P37
D0101800W032 TIALN ...................................... P37
D0101800W032 UNCOATED ............................. P37
D0102000T038 TIALN ....................................... P37
D0102000T038 UNCOATED............................... P37
D0102000W038 TIALN ...................................... P37
D0102000W038 UNCOATED ............................. P37
D0110200T006 TIALN ....................................... P19
D0110300T007 TIALN ....................................... P19
D0110400T008 TIALN ....................................... P19
D0110500T010 TIALN ....................................... P19
D0110600T010 TIALN ....................................... P19
D0110700T013 TIALN ....................................... P19
D0110800T016 TIALN ....................................... P19
D0111000T019 TIALN ....................................... P19
D0111200T022 TIALN ....................................... P19
D0111400T022 TIALN ....................................... P19
D0111600T026 TIALN ....................................... P19
D0112000T032 TIALN ....................................... P19
D0120250T007 TIALN ....................................... P14
D0120250T007 UNCOATED............................... P14
D0120300T007 TIALN ....................................... P14
D0120300T007 UNCOATED............................... P14
D0120400T008 TIALN ....................................... P14
D0120400T008 UNCOATED............................... P14
D0120450T008 TIALN ....................................... P14
D0120450T008 UNCOATED............................... P14
D0120500T010 TIALN ....................................... P14
D0120500T010 UNCOATED............................... P14
D0120600T010 TIALN ....................................... P14
D0120600T010 UNCOATED............................... P14
D0120700T013 TIALN ....................................... P14
D0120700T013 UNCOATED............................... P14
D0120800T016 TIALN ....................................... P14
D0120800T016 UNCOATED............................... P14
D0120900T016 TIALN ....................................... P14
D0120900T016 UNCOATED............................... P14
D0121000T019 TIALN ....................................... P15
D0121000T019 UNCOATED............................... P15
D0121200T022 TIALN ....................................... P15
D0121200T022 UNCOATED............................... P15
D0121200W022 TIALN ...................................... P15
D0121200W022 UNCOATED ............................. P15
D0121400T022 TIALN ....................................... P15
D0121400T022 UNCOATED............................... P15
D0121400W022 TIALN ...................................... P15
D0121400W022 UNCOATED ............................. P15
D0121600T026 TIALN ....................................... P15
D0121600T026 UNCOATED............................... P15
D0121600W026 TIALN ...................................... P15
D0121600W026 UNCOATED ............................. P15
D0121800T026 TIALN ....................................... P15
D0121800T026 UNCOATED............................... P15
D0121800W026 TIALN ...................................... P15
D0121800W026 UNCOATED ............................. P15
D0122000T032 TIALN ....................................... P15
D0122000T032 UNCOATED............................... P15
D0122000W032 TIALN ...................................... P15
D0122000W032 UNCOATED ............................. P15
D0140200T007 TIALN ....................................... P32
D0140250T008 TIALN ....................................... P32
D0140300T008 TIALN ....................................... P32
D0140350T010 TIALN ....................................... P32
D0140400T011 TIALN ....................................... P32
D0140450T011 TIALN ....................................... P32
D0140500T013 TIALN ....................................... P32
D0140550T013 TIALN ....................................... P32
D0140600T013 TIALN ....................................... P32
D0140650T016 TIALN ....................................... P32
D0140700T016 TIALN ....................................... P32
D0140750T019 TIALN ....................................... P32
D0140800T019 TIALN ....................................... P32
D0140900T019 TIALN ....................................... P33
D0141000T022 TIALN ....................................... P33
D0141200T026 TIALN ....................................... P33
D0141200W026 TIALN ...................................... P33
D0141200W026 UNCOATED ............................. P33
D0141400T026 TIALN ....................................... P33
D0141400W026 TIALN ...................................... P33
D0141400W026 UNCOATED ............................. P33
D0141600T032 TIALN ....................................... P33
D0141600W032 TIALN ...................................... P33
D0141600W032 UNCOATED ............................. P33
D0141800T032 TIALN ....................................... P33
D0141800W032 TIALN ...................................... P33
D0141800W032 UNCOATED ............................. P33
D0142000T038 TIALN ....................................... P33
D0142000W038 TIALN ...................................... P33
D0142000W038 UNCOATED ............................. P33
D100MTTB1330KM63 ....................................... C84
D40MTTB560KM40 ........................................... C84
D50203002.. UNCOATED .................................O134
D50203002RT TIALN-RT..................................O134
D50204002.. UNCOATED .................................O134
D50204002RT TIALN-RT..................................O134
D50205002.. UNCOATED .................................O134
D50205002RT TIALN-RT..................................O134
D50206002.. UNCOATED .................................O134
D50206002RT TIALN-RT..................................O134
D50208003.. UNCOATED .................................O134
D50208003RT TIALN-RT..................................O134
D50210004.. UNCOATED .................................O134
D50210004RT TIALN-RT..................................O134
D50212005.. UNCOATED .................................O134
D50212005RT TIALN-RT..................................O134
D50214014.. UNCOATED .................................O134
D50216006.. UNCOATED .................................O134
D50216006RT TIALN-RT..................................O134
D50220007.. UNCOATED .................................O134
D50302002CW TICN-CW .................................. O85
D50302002RW TIALN-RW ................................. O85
D50302002WW UNCOATEDWW ........................ O85
D50303002CW TICN-CW .................................. O85
D50303002RW TIALN-RW ................................. O85
D50303002WW UNCOATEDWW ........................ O85
D50304002CW TICN-CW .................................. O85
D50304002RW TIALN-RW ................................. O85
D50304002WW UNCOATEDWW ........................ O85
D50305002CW TICN-CW .................................. O85
D50305002RW TIALN-RW ................................. O85
D50305002WW UNCOATEDWW ........................ O85
D50306002CW TICN-CW .................................. O85
D50306002RW TIALN-RW ................................. O85
D50306002WW UNCOATEDWW ........................ O85
D50308003CW TICN-CW .................................. O85
D50308003RW TIALN-RW ................................. O85
D50308003WW UNCOATEDWW ........................ O85
D50310004CW TICN-CW .................................. O85
D50310004RW TIALN-RW ................................. O85
D50310004WW UNCOATEDWW ........................ O85
D50312005RW TIALN-RW ................................. O85
D50312005WW UNCOATEDWW ........................ O85
D50314014RW TIALN-RW ................................. O85
D50316006RW TIALN-RW ................................. O85
D50316006WW UNCOATEDWW ........................ O85
D50320007RW TIALN-RW ................................. O85
D50706002W WP15PE ..................................... O92
D50708003W WP15PE ..................................... O92
D50710004W WP15PE ..................................... O92
D50712005W WP15PE ..................................... O92
D50714014W WP15PE ..................................... O92
D50716006W WP15PE ..................................... O92
D50718018W WP15PE ..................................... O92
D50720007W WP15PE ..................................... O92
D50MTTB737KM40 ........................................... C84
D51303002RW TIALN-RW ................................. O85
D51303002WW UNCOATEDWW ........................ O85
D51304002RW TIALN-RW ................................. O85
D51304002WW UNCOATEDWW ........................ O85
D51305002RW TIALN-RW ................................. O85
D51305002WW UNCOATEDWW ........................ O85
D51306002RW TIALN-RW ................................. O85
D51306002WW UNCOATEDWW ........................ O85
D51308003RW TIALN-RW ................................. O85
D51308003WW UNCOATEDWW ........................ O85
D51310004RW TIALN-RW ................................. O85
D51310004WW UNCOATEDWW ........................ O85
D51312005RW TIALN-RW ................................. O85
D51312005WW UNCOATEDWW ........................ O85
D51314014RW TIALN-RW ................................. O85
D51316006RW TIALN-RW ................................. O85
D51316006WW UNCOATEDWW ........................ O85
D51318018RW TIALN-RW ................................. O85
D51318018WW UNCOATEDWW ........................ O85
D51320007RW TIALN-RW ................................. O85
D51320007WW UNCOATEDWW ........................ O85
D51706002W WP15PE ..................................... O92
D51708003W WP15PE ..................................... O92
D51710004W WP15PE ..................................... O92
D51712005W WP15PE ..................................... O92
D51714014W WP15PE ..................................... O92
D51716006W WP15PE ..................................... O92
D51718018W WP15PE ..................................... O92
D51720007W WP15PE ..................................... O92
D51804002W WP15PE ..................................... O95
D51805002W WP15PE ..................................... O95
D51806002W WP15PE ..................................... O95
D51807003W WP15PE ..................................... O95
D51808003W WP15PE ..................................... O95
D51809004W WP15PE ..................................... O95
D51810004W WP15PE ..................................... O95
D51812005W WP15PE ..................................... O95
D51814014W WP15PE ..................................... O95
D51816006W WP15PE ..................................... O95
D51818018W WP15PE ..................................... O95
D51820007W WP15PE ..................................... O95
D51825008W WP15PE ..................................... O95
D60MTTB1000KM40 ......................................... C84
D61803002RJ TIALN-RJ .................................. O191
D61804002RJ TIALN-RJ .................................. O191
D61805002RJ TIALN-RJ .................................. O191
D61806002RJ TIALN-RJ .................................. O191
D61807003RJ TIALN-RJ .................................. O191
D61808003RJ TIALN-RJ .................................. O191
D61810004RJ TIALN-RJ .................................. O191
D61812005RJ TIALN-RJ .................................. O191
D61816006RJ TIALN-RJ .................................. O191
D61820007RJ TIALN-RJ .................................. O191
D80MTTB1120KM63 ......................................... C84
DC0303002LW TIALN-LW .................................. O86
DC0304002LW TIALN-LW .................................. O86
DC0305002LW TIALN-LW .................................. O86
DC0306002LW TIALN-LW .................................. O86
DC0308003LW TIALN-LW .................................. O86
DC0310004LW TIALN-LW .................................. O86
DC0312005LW TIALN-LW .................................. O86
DC0314014LW TIALN-LW .................................. O86
DC0316006LW TIALN-LW .................................. O86
DC0318018LW TIALN-LW .................................. O86
DC0320007LW TIALN-LW .................................. O86
DCGT0702011P TN10U ................................... B129
DCGT0702011P TN15U ................................... B129
DCGT070202AL3 HCK10 ................................. B156
DCGT070202AL3 HWK15 ................................ B156
DCGT070204AL3 HCK10 ................................. B156
DCGT070204AL3 HWK15 ................................ B156
DCGT11T3011P TN10U ................................... B129
DCGT11T3011P TN15U ................................... B129
DCGT11T302AL3 HWK15 ................................ B156
DCGT11T304AL3 HCK10 ................................. B156
DCGT11T304AL3 HWK15 ................................ B156
DCGT11T308AL3 HCK10 ................................. B156
DCGT11T308AL3 HWK15 ................................ B156
DCGT1504081P TN10U ................................... B129
DCGW070202EC WBH25P .............................. B206
DCGW070202S01015C WBH10P .................... B206
DCGW070204FST WDN25U ............................ B206
DCGW070204S01015C WBH10P .................... B206
DCGW070204S01015C WBH25P .................... B206
DCGW11T304FST WDN25U ............................. B206
DCGW11T304S01015MT WBH10P ................. B206
DCGW11T308S01015MT WBH10P ................. B206
DCKNL2020K12KC04 WG .................................... C8
DCKNL2525M12KC04 WG ................................... C8
DCKNL3225P12KC04 WG .................................... C8
DCKNR2020K12KC04 WG ................................... C8
DCKNR2525M12KC04 WG .................................. C8
DCKNR3225P12KC04 WG ................................... C8
DCKNR3232P16KC06 WG ................................... C8
DCKNR3232P19KC06 WG ................................... C8
DCLNL1616H09KC03 WG .................................... C9
DCLNL2020K09KC03 WG .................................... C9
DCLNL2020K12KC04 WG .................................... C9
DCLNL2525M12KC04 WG ................................... C9
Catalogue No. Page(s) Catalogue No. Page(s) Catalogue No. Page(s)
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 96 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRANDO b 28 20153 09PM
Z97
widia.com
Index by Catalogue Number
Catalogue No. Page(s)
DCLNL2525M16KC06 WG ................................... C9
DCLNL3232P16KC06 WG .................................... C9
DCLNL3232P19KC06 WG .................................... C9
DCLNL4040S19KC06 WG .................................... C9
DCLNL4040S25KC09 WG .................................... C9
DCLNR1616H09KC03 WG ................................... C9
DCLNR2020K09KC03 WG.................................... C9
DCLNR2020K12KC04 WG.................................... C9
DCLNR2525M12KC04 WG ................................... C9
DCLNR2525M16KC06 WG ................................... C9
DCLNR3232P16KC06 WG.................................... C9
DCLNR3232P19KC06 WG.................................... C9
DCLNR4040S19KC06 WG.................................... C9
DCLNR4040S25KC09 WG.................................... C9
DCMT0702021P TN10U .................................. B129
DCMT0702021P TN15U .................................. B129
DCMT070202FP WM25CT ................................. B48
DCMT070202FP WP25CT.................................. B48
DCMT070204 THM ............................................ B47
DCMT0702041P TN10P .................................. B129
DCMT0702041P TN10U .................................. B129
DCMT0702041P TN15M ................................. B129
DCMT0702041P TN15U .................................. B129
DCMT0702041P TN20K .................................. B129
DCMT0702041P TN20P .................................. B129
DCMT0702041P TN30M ................................. B129
DCMT070204FP WK20CT.................................. B48
DCMT070204FP WM15CT ................................. B48
DCMT070204FP WM25CT ................................. B48
DCMT070204FP WP15CT.................................. B48
DCMT070204FP WP25CT.................................. B48
DCMT070208FP WM25CT ................................. B48
DCMT070208FP WP25CT.................................. B48
DCMT11T3021P TN10U .................................. B129
DCMT11T3021P TN15U .................................. B129
DCMT11T302FP WM25CT ................................. B48
DCMT11T302FP WP15CT .................................. B48
DCMT11T302FP WP25CT .................................. B48
DCMT11T304 HK1500 ...................................... B47
DCMT11T304 THM ............................................ B47
DCMT11T304 TTI15 .......................................... B47
DCMT11T304 TTR ............................................. B47
DCMT11T3041P TN10P .................................. B129
DCMT11T3041P TN10U .................................. B129
DCMT11T3041P TN15M.................................. B129
DCMT11T3041P TN15U .................................. B129
DCMT11T3041P TN20K .................................. B129
DCMT11T3041P TN20P .................................. B129
DCMT11T3041P TN30M.................................. B129
DCMT11T304FP WK20CT .................................. B48
DCMT11T304FP WM15CT ................................. B48
DCMT11T304FP WM25CT ................................. B48
DCMT11T304FP WP15CT .................................. B48
DCMT11T304FP WP25CT .................................. B48
DCMT11T304FW WM15CT ................................ B48
DCMT11T304FW WP15CT ................................. B48
DCMT11T304MP WK20CT................................. B49
DCMT11T304MP WP15CT................................. B49
DCMT11T304MP WP25CT................................. B49
DCMT11T304MU TN5105 ................................. B49
DCMT11T304MU WK05CT ................................ B49
DCMT11T304MU WK20CT ................................ B49
DCMT11T304MU WM25CT................................ B49
DCMT11T304MU WP15CT ................................ B49
DCMT11T304MU WP25CT ................................ B49
DCMT11T304MU WS10PT ................................. B49
DCMT11T304MU WS25PT ................................. B49
DCMT11T304MW WP15CT ............................... B50
DCMT11T304MW WP25CT ............................... B50
DCMT11T308 HK1500 ...................................... B47
DCMT11T308 THM ............................................ B47
DCMT11T3081P TN10P .................................. B129
DCMT11T3081P TN10U .................................. B129
DCMT11T3081P TN15M.................................. B129
DCMT11T3081P TN20K .................................. B129
DCMT11T3081P TN20P .................................. B129
DCMT11T3081P TN30M.................................. B129
DCMT11T308FP WK20CT .................................. B48
DCMT11T308FP WM15CT ................................. B48
DCMT11T308FP WM25CT ................................. B48
DCMT11T308FP WP15CT .................................. B48
DCMT11T308FP WP25CT .................................. B48
DCMT11T308FW WM15CT ................................ B48
DCMT11T308FW WP15CT ................................. B48
DCMT11T308MP WK20CT................................. B49
DCMT11T308MP WM15CT ................................ B49
DCMT11T308MP WM25CT ................................ B49
DCMT11T308MP WP15CT................................. B49
DCMT11T308MP WP25CT................................. B49
DCMT11T308MU TN2000 ................................. B49
DCMT11T308MU WK05CT ................................ B49
DCMT11T308MU WK20CT ................................ B49
DCMT11T308MU WM25CT................................ B49
DCMT11T308MU WP15CT ................................ B49
DCMT11T308MU WS10PT ................................. B49
DCMT11T308MU WS25PT ................................. B49
DCMT11T308MW WP15CT ............................... B50
DCMT11T308MW WP25CT ............................... B50
DCMT11T312 THM ............................................ B47
DCMT11T3121P TN10P .................................. B129
DCMT11T3121P TN10U .................................. B129
DCMT11T3121P TN15M.................................. B129
DCMT11T3121P TN20K .................................. B129
DCMT11T312FP WP15CT .................................. B48
DCMT11T312FP WP25CT .................................. B48
DCMT11T312MP WP15CT................................. B49
DCMT11T312MP WP25CT................................. B49
DCMT150404 THM ............................................ B47
DCMT1504041P TN10P .................................. B129
DCMT1504041P TN20K .................................. B129
DCMT1504041P TN20P .................................. B129
DCMT150404FP WM25CT ................................. B48
DCMT150404FP WP15CT.................................. B48
DCMT150404FP WP25CT.................................. B48
DCMT150408 THM ............................................ B47
DCMT150408 TTR ............................................. B47
DCMT1504081P TN10P .................................. B129
DCMT1504081P TN20K .................................. B129
DCMT1504081P TN20P .................................. B129
DCMT150408FP WK20CT.................................. B48
DCMT150408FP WM25CT ................................. B48
DCMT150408FP WP15CT.................................. B48
DCMT150408FP WP25CT.................................. B48
DCMT150408MU TN5105 ................................. B49
DCMT150408MU WK05CT ................................ B49
DCMT150408MU WK20CT ................................ B49
DCMT150408MU WM25CT ............................... B49
DCMT150408MU WP15CT ................................ B49
DCMT150408MU WP25CT ................................ B49
DCMT150408MU WS10PT ................................ B49
DCMT150408MU WS25PT ................................ B49
DCMT150412 THM ............................................ B47
DCMT150412MU TN5105 ................................. B49
DCMT150412MU WK05CT ................................ B49
DCMT150412MU WK20CT ................................ B49
DCMT150416 THM ............................................ B47
DCMW070204 THM........................................... B50
DCMW070204 WK05CT .................................... B50
DCMW070204 WK20CT .................................... B50
DCMW070204FST WDN25U ............................ B207
DCMW11T304 THM ........................................... B50
DCMW11T304 WK05CT .................................... B50
DCMW11T304 WK20CT .................................... B50
DCMW11T304FST WDN25U ............................ B207
DCMW11T308FST WDN25U ............................ B207
DCMW150408 THM........................................... B50
DCMW150408 WK05CT .................................... B50
DCMW150408 WK20CT .................................... B50
DCMX11T302R18 THM...................................... B50
DCRNL2020K12KC04 WG.................................. C10
DCRNL2525M12KC04 WG ................................. C10
DCRNL3225P12KC04 WG.................................. C10
DCRNL3232P16KC06 WG.................................. C10
DCRNR2020K12KC04 WG ................................. C10
DCRNR2525M12KC04 WG ................................ C10
DCRNR3225P12KC04 WG ................................. C10
DCRNR3232P16KC06 WG ................................. C10
DCRNR3232P19KC06 WG ................................. C10
DCSNL2020K12KC04 WG .................................. C10
DCSNL2525M12KC04 WG ................................. C10
DCSNR2020K12KC04 WG ................................. C10
DCSNR2525M12KC04 WG ................................ C10
DDJNL2020K11KC04 WG .................................. C11
DDJNL2020K15KC06 WG .................................. C11
DDJNL2525M11KC04 WG ................................. C11
DDJNL2525M15KC06 WG ................................. C11
DDJNL3225P15KC06 WG .................................. C11
DDJNL3232P15KC06 WG .................................. C11
DDJNR2020K11KC04 WG.................................. C11
DDJNR2020K15KC06 WG.................................. C11
DDJNR2525M11KC04 WG ................................. C11
DDJNR2525M15KC06 WG ................................. C11
DDJNR3225P15KC06 WG.................................. C11
DDJNR3232P15KC06 WG.................................. C11
DDNNL2020K15KC06 WG ................................. C11
DDNNL2525M15KC06 WG ................................ C11
DDNNL3225P15KC06 WG ................................. C11
DDNNR2020K15KC06 WG ................................. C11
DDNNR2525M15KC06 WG ................................ C11
DNGA150404EFWMT WBH25P ........................ B208
DNGA150404FST WDN00U ............................. B207
DNGA150404FST WDN25U ............................. B207
DNGA150404S01025MT WBH10P .................. B208
DNGA150404S01025MT WBH25P .................. B208
DNGA150404S01025MT WBH30P .................. B208
DNGA150404T02020 CW2015 ....................... B181
DNGA150408EFWMT WBH25P ........................ B208
DNGA150408EMT WBH25P ............................. B207
DNGA150408FST WDN00U ............................. B207
DNGA150408FST WDN25U ............................. B207
DNGA150408S01025MT WBH10P .................. B208
DNGA150408S01025MT WBH25P .................. B208
DNGA150408T02020 CW2015 ....................... B181
DNGA150412EFWMT WBH25P ........................ B208
DNGA150412EMT WBH25P ............................. B207
DNGA150412T02020 CW2015 ....................... B181
DNGA150412T02020 CW5025 ....................... B181
DNGA150604T02020 CW2015 ....................... B181
DNGA150608T02020 CW2015 ....................... B181
DNGA150612T02020 CW2015 ....................... B181
DNGA150612T02020 CW5025 ....................... B181
DNGG110402FS WS10PT .................................. B51
DNGG110402FS WS25PT .................................. B51
DNGG110402FS WU10HT .................................. B51
DNGG110404FS WS10PT .................................. B51
DNGG110404FS WU10HT .................................. B51
DNGG110408FS WS10PT .................................. B51
DNGG110408FS WU10HT .................................. B51
DNGG150401FS WS10PT .................................. B51
DNGG150401FS WU10HT .................................. B51
DNGG150402FS WS10PT .................................. B51
DNGG150402FS WU10HT .................................. B51
DNGG150404FS WS10PT .................................. B51
DNGG150404FS WS25PT .................................. B51
DNGG150404FS WU10HT .................................. B51
DNGG150408FS WS10PT .................................. B51
DNGG150408FS WS25PT .................................. B51
DNGG150408FS WU10HT .................................. B51
DNGG150412FS WS10PT .................................. B51
DNGG150412FS WU10HT .................................. B51
DNGG150604FS WS10PT .................................. B51
DNGG150604FS WS25PT .................................. B51
DNGG150604FS WU10HT .................................. B51
DNGG150608FS WS10PT .................................. B51
DNGG150608FS WS25PT .................................. B51
DNGG150608FS WU10HT .................................. B51
DNGN150704T02020 CW2015 ....................... B180
DNGN150708T01020 CW3020 ....................... B180
DNGN150708T02020 CW2015 ....................... B180
DNGN150712T02020 CW2015 ....................... B180
DNGN150716T01020 CW3020 ....................... B180
DNGP150401 TN10U ............................... B52, B130
DNGP150401 WS10PT ...................................... B52
DNGP150402 TN10U ............................... B52, B130
DNGP150402 TN15U ....................................... B130
DNGP150402 WS10PT ...................................... B52
DNGP150404 TN10U ............................... B52, B130
DNGP150404 TN15U ....................................... B130
DNGP150404 WS10PT ...................................... B52
DNGP150404 WU10HT ...................................... B52
DNGP150408 TN10U ............................... B52, B130
DNGP150408 TN15U ....................................... B130
DNGP150408 WS10PT ...................................... B52
DNGP150408 WU10HT ...................................... B52
DNGX120712T02020 CW5025 ....................... B181
DNGX120716T02020 CW5025 ....................... B181
DNGX150708T02020 CW5025 ....................... B181
DNGX150712T02020 CW5025 ....................... B181
DNGX150716T02020 CW5025 ....................... B181
DNMA110408 WK05CT ..................................... B52
DNMA110408 WK20CT ..................................... B52
DNMA110408S02020 WBK40U....................... B208
DNMA110412 WK20CT ..................................... B52
DNMA150408 TN20K ...................................... B130
DNMA150408 WK05CT ..................................... B52
DNMA150408 WK20CT ..................................... B52
DNMA150412 TN20K ...................................... B130
DNMA150412 WK05CT ..................................... B52
DNMA150412 WK20CT ..................................... B52
DNMA150416 WK20CT ..................................... B52
DNMA150608 TN20K ...................................... B130
DNMA150608 WK05CT ..................................... B52
DNMA150608 WK20CT ..................................... B52
DNMA150612 TN20K ...................................... B130
DNMA150612 WK05CT ..................................... B52
DNMA150612 WK20CT ..................................... B52
DNMA150616 WK20CT ..................................... B52
DNMG110404FF WK20CT ................................. B54
DNMG110404FF WM25CT ................................ B54
DNMG110404FF WP15CT ................................. B54
DNMG110404FF WS10PT ................................. B54
DNMG110404FW WP15CT ................................ B55
Catalogue No. Page(s) Catalogue No. Page(s) Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 97 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRAND O b 28 2015 3 09 PM
Z98 widia.com
Index by Catalogue Number
Index
Catalogue No. Page(s)
DNMG110404ML WK05CT ................................ B56
DNMG110404ML WK20CT ................................ B56
DNMG110404ML WP15CT ................................ B56
DNMG110404ML WP25CT ................................ B56
DNMG110404UF WM15CT ................................ B60
DNMG110404UF WM25CT ................................ B60
DNMG110404UF WS10PT ................................. B60
DNMG110404UM WM15CT ............................... B61
DNMG110404UM WM25CT ............................... B61
DNMG110404UM WM35CT ............................... B61
DNMG11040822 TTI15...................................... B53
DNMG1104086P TN10P .................................. B132
DNMG1104086P TN20P .................................. B132
DNMG1104086P TN30M ................................. B132
DNMG110408FF WK20CT ................................. B54
DNMG110408FF WM25CT ................................ B54
DNMG110408FF WP15CT ................................. B54
DNMG110408FW WP15CT ................................ B55
DNMG110408ML WK05CT ................................ B56
DNMG110408ML WK20CT ................................ B56
DNMG110408ML WP15CT ................................ B56
DNMG110408ML WP25CT ................................ B56
DNMG110408MR WP15CT ................................ B57
DNMG110408MR WP25CT ................................ B57
DNMG110408MR WP35CT ................................ B57
DNMG110408MS WS10PT ................................ B58
DNMG110408MS WS25PT ................................ B58
DNMG110408MS WU10HT ................................ B58
DNMG110408UF WM15CT ................................ B60
DNMG110408UF WM25CT ................................ B60
DNMG110408UF WS10PT ................................. B60
DNMG110408UM WM15CT ............................... B61
DNMG110408UM WM25CT ............................... B61
DNMG110408UM WM35CT ............................... B61
DNMG110408UM WS10PT ................................ B61
DNMG110408UR WK20CT ................................. B62
DNMG110408UR WM15CT ................................ B62
DNMG110408UR WM25CT ................................ B62
DNMG110408UR WM35CT ................................ B62
DNMG110408UR WP15CT ................................. B62
DNMG110408UR WP25CT ................................. B62
DNMG110408UR WP35CT ................................. B62
DNMG110412FF WM25CT ................................ B54
DNMG110412ML WP15CT ................................ B56
DNMG110412UM WM15CT ............................... B61
DNMG110412UM WM25CT ............................... B61
DNMG110412UM WM35CT ............................... B61
DNMG110412UR WK20CT ................................. B62
DNMG110412UR WM15CT ................................ B62
DNMG110412UR WP15CT ................................. B62
DNMG110412UR WP25CT ................................. B62
DNMG1504042P TN10P .................................. B131
DNMG1504042P TN10U .................................. B131
DNMG1504042P TN15M ................................. B131
DNMG1504042P TN15U .................................. B131
DNMG1504042P TN20K .................................. B131
DNMG1504042P TN20P .................................. B131
DNMG1504042P TN30M ................................. B131
DNMG1504044P TN15M ................................. B131
DNMG1504044P TN30M ................................. B131
DNMG1504046P TN10P .................................. B132
DNMG1504046P TN15M ................................. B132
DNMG1504046P TN20P .................................. B132
DNMG1504046P TN30M ................................. B132
DNMG1504047N TN10P .................................. B133
DNMG1504047N TN20P .................................. B133
DNMG150404FF WM25CT ................................ B54
DNMG150404FF WP15CT ................................. B54
DNMG150404FF WS10PT ................................. B54
DNMG150404FW WK05CT ................................ B55
DNMG150404FW WM15CT ............................... B55
DNMG150404FW WM25CT ............................... B55
DNMG150404FW WP15CT ................................ B55
DNMG150404ML WK05CT ................................ B56
DNMG150404ML WK20CT ................................ B56
DNMG150404ML WP15CT ................................ B56
DNMG150404ML WP25CT ................................ B56
DNMG150404MR WP15CT ................................ B57
DNMG150404MR WP25CT ................................ B57
DNMG150404MR WP35CT ................................ B57
DNMG150404MS WS10PT ................................ B58
DNMG150404MS WS25PT ................................ B58
DNMG150404MS WU10HT ................................ B58
DNMG150404UF WM15CT ................................ B60
DNMG150404UF WM25CT ................................ B60
DNMG150404UF WS10PT ................................. B60
DNMG150404UM WM15CT ............................... B61
DNMG150404UM WM25CT ............................... B61
DNMG150404UM WM35CT ............................... B61
DNMG150404UM WS10PT ................................ B61
DNMG1504082P TN10P .................................. B131
DNMG1504082P TN10U .................................. B131
DNMG1504082P TN15M ................................. B131
DNMG1504082P TN15U .................................. B131
DNMG1504082P TN20K .................................. B131
DNMG1504082P TN20P .................................. B131
DNMG1504082P TN30M ................................. B131
DNMG1504084P TN10U .................................. B131
DNMG1504084P TN15M ................................. B131
DNMG1504084P TN20P .................................. B131
DNMG1504084P TN30M ................................. B131
DNMG1504086P TN10P .................................. B132
DNMG1504086P TN15M ................................. B132
DNMG1504086P TN20P .................................. B132
DNMG1504086P TN30M ................................. B132
DNMG1504086P TN30P .................................. B132
DNMG1504087N TN10P .................................. B133
DNMG1504087N TN20K .................................. B133
DNMG1504087N TN20P .................................. B133
DNMG1504087N TN30P .................................. B133
DNMG150408FF WK20CT ................................. B54
DNMG150408FF WM25CT ................................ B54
DNMG150408FF WP15CT ................................. B54
DNMG150408FF WS10PT ................................. B54
DNMG150408FW WK05CT ................................ B55
DNMG150408FW WM15CT ............................... B55
DNMG150408FW WM25CT ............................... B55
DNMG150408FW WP15CT ................................ B55
DNMG150408ML WK05CT ................................ B56
DNMG150408ML WK20CT ................................ B56
DNMG150408ML WP15CT ................................ B56
DNMG150408ML WP25CT ................................ B56
DNMG150408MR WP15CT ................................ B57
DNMG150408MR WP25CT ................................ B57
DNMG150408MR WP35CT ................................ B57
DNMG150408MS WS10PT ................................ B58
DNMG150408MS WS25PT ................................ B58
DNMG150408MS WU10HT ................................ B58
DNMG150408MW WK05CT ............................... B58
DNMG150408MW WM25CT .............................. B58
DNMG150408MW WP15CT ............................... B58
DNMG150408MW WP25CT ............................... B58
DNMG150408RH WK20CT................................. B59
DNMG150408RH WM25CT ................................ B59
DNMG150408RH WP15CT................................. B59
DNMG150408RH WP25CT................................. B59
DNMG150408RH WP35CT................................. B59
DNMG150408UF WM15CT ................................ B60
DNMG150408UF WM25CT ................................ B60
DNMG150408UF WP15CT ................................. B60
DNMG150408UF WP25CT ................................. B60
DNMG150408UF WS10PT ................................. B60
DNMG150408UM WM15CT ............................... B61
DNMG150408UM WM25CT ............................... B61
DNMG150408UM WM35CT ............................... B61
DNMG150408UM WP15CT ................................ B61
DNMG150408UM WP25CT ................................ B61
DNMG150408UM WS10PT ................................ B61
DNMG150408UR WK20CT ................................. B62
DNMG150408UR WM15CT ................................ B62
DNMG150408UR WM25CT ................................ B62
DNMG150408UR WM35CT ................................ B62
DNMG150408UR WP15CT ................................. B62
DNMG150408UR WP25CT ................................. B62
DNMG150408UR WP35CT ................................. B62
DNMG150408UR WS25PT ................................. B62
DNMG1504126P TN10P .................................. B132
DNMG1504126P TN15M ................................. B132
DNMG1504126P TN20P .................................. B132
DNMG1504126P TN30M ................................. B132
DNMG1504127N TN10P .................................. B133
DNMG1504127N TN20K .................................. B133
DNMG1504127N TN20P .................................. B133
DNMG1504127N TN30P .................................. B133
DNMG150412FF WK20CT ................................. B54
DNMG150412ML WK05CT ................................ B56
DNMG150412ML WK20CT ................................ B56
DNMG150412ML WP15CT ................................ B56
DNMG150412MR WP15CT ................................ B57
DNMG150412MR WP25CT ................................ B57
DNMG150412MR WP35CT ................................ B57
DNMG150412MS WS10PT ................................ B58
DNMG150412MS WS25PT ................................ B58
DNMG150412MS WU10HT ................................ B58
DNMG150412MW WK05CT ............................... B58
DNMG150412MW WM25CT .............................. B58
DNMG150412RH WK20CT................................. B59
DNMG150412RH WP15CT................................. B59
DNMG150412RH WP25CT................................. B59
DNMG150412RH WP35CT................................. B59
DNMG150412UF WM15CT ................................ B60
DNMG150412UF WM25CT ................................ B60
DNMG150412UM WM15CT ............................... B61
DNMG150412UM WM25CT ............................... B61
DNMG150412UM WM35CT ............................... B61
DNMG150412UM WS10PT ................................ B61
DNMG150412UR WK20CT ................................. B62
DNMG150412UR WM25CT ................................ B62
DNMG150412UR WM35CT ................................ B62
DNMG150412UR WP15CT ................................. B62
DNMG150412UR WP25CT ................................. B62
DNMG150412UR WP35CT ................................. B62
DNMG150412UR WS25PT ................................. B62
DNMG150416UR WK20CT ................................. B62
DNMG150416UR WM35CT ................................ B62
DNMG150416UR WS10PT ................................. B62
DNMG1506042P TN10P .................................. B131
DNMG1506042P TN10U .................................. B131
DNMG1506042P TN15M ................................. B131
DNMG1506042P TN15U .................................. B131
DNMG1506042P TN20K .................................. B131
DNMG1506042P TN20P .................................. B131
DNMG1506044P TN15M ................................. B131
DNMG1506044P TN20P .................................. B131
DNMG1506044P TN30M ................................. B131
DNMG1506046P TN10P .................................. B132
DNMG1506046P TN15M ................................. B132
DNMG1506046P TN20P .................................. B132
DNMG1506046P TN30M ................................. B132
DNMG150604CT WM15CT ................................ B53
DNMG150604CT WM25CT ................................ B53
DNMG150604FF WK20CT ................................. B54
DNMG150604FF WM25CT ................................ B54
DNMG150604FF WP15CT ................................. B54
DNMG150604FF WS10PT ................................. B54
DNMG150604FW WK05CT ................................ B55
DNMG150604FW WM15CT ............................... B55
DNMG150604FW WM25CT ............................... B55
DNMG150604FW WP15CT ................................ B55
DNMG150604ML WK05CT ................................ B56
DNMG150604ML WK20CT ................................ B56
DNMG150604ML WP15CT ................................ B56
DNMG150604ML WP25CT ................................ B56
DNMG150604MR WP15CT ................................ B57
DNMG150604MR WP25CT ................................ B57
DNMG150604MR WP35CT ................................ B57
DNMG150604MS WS10PT ................................ B58
DNMG150604MS WS25PT ................................ B58
DNMG150604MS WU10HT ................................ B58
DNMG150604UF WM15CT ................................ B60
DNMG150604UF WM25CT ................................ B60
DNMG150604UF WS10PT ................................. B60
DNMG150604UM WM15CT ............................... B61
DNMG150604UM WM25CT ............................... B61
DNMG150604UM WM35CT ............................... B61
DNMG150604UM WS10PT ................................ B61
DNMG1506082P TN10P .................................. B131
DNMG1506082P TN10U .................................. B131
DNMG1506082P TN15M ................................. B131
DNMG1506082P TN15U .................................. B131
DNMG1506082P TN20K .................................. B131
DNMG1506082P TN20P .................................. B131
DNMG1506084P TN15M ................................. B131
DNMG1506084P TN20P .................................. B131
DNMG1506084P TN30M ................................. B131
DNMG1506086P TN10P .................................. B132
DNMG1506086P TN15M ................................. B132
DNMG1506086P TN20P .................................. B132
DNMG1506086P TN30M ................................. B132
DNMG1506086P TN30P .................................. B132
DNMG1506087N TN10P .................................. B133
DNMG1506087N TN20K .................................. B133
DNMG1506087N TN20P .................................. B133
DNMG1506087N TN30P .................................. B133
DNMG150608CT WM15CT ................................ B53
DNMG150608CT WM25CT ................................ B53
DNMG150608FF WK20CT ................................. B54
DNMG150608FF WM25CT ................................ B54
DNMG150608FF WP15CT ................................. B54
DNMG150608FW WK05CT ................................ B55
DNMG150608FW WM15CT ............................... B55
DNMG150608FW WM25CT ............................... B55
DNMG150608FW WP15CT ................................ B55
DNMG150608ML WK05CT ................................ B56
DNMG150608ML WK20CT ................................ B56
DNMG150608ML WP15CT ................................ B56
DNMG150608ML WP25CT ................................ B56
DNMG150608MR WM25CT ............................... B57
DNMG150608MR WM35CT ............................... B57
DNMG150608MR WP15CT ................................ B57
DNMG150608MR WP25CT ................................ B57
DNMG150608MR WP35CT ................................ B57
Catalogue No. Page(s) Catalogue No. Page(s) Catalogue No. Page(s)
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 98 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRANDO b 28 20153 09PM
Z99
widia.com
Index by Catalogue Number
Catalogue No. Page(s)
DNMG150608MS WS10PT ................................ B58
DNMG150608MS WS25PT ................................ B58
DNMG150608MS WU10HT ................................ B58
DNMG150608MW WK05CT ............................... B58
DNMG150608MW WM25CT .............................. B58
DNMG150608MW WP15CT ............................... B58
DNMG150608MW WP25CT ............................... B58
DNMG150608RH WK20CT................................. B59
DNMG150608RH WM25CT ................................ B59
DNMG150608RH WP15CT................................. B59
DNMG150608RH WP25CT................................. B59
DNMG150608RH WP35CT................................. B59
DNMG150608UF WM15CT ................................ B60
DNMG150608UF WM25CT ................................ B60
DNMG150608UF WP25CT ................................. B60
DNMG150608UF WS10PT ................................. B60
DNMG150608UM WM15CT ............................... B61
DNMG150608UM WM25CT ............................... B61
DNMG150608UM WM35CT ............................... B61
DNMG150608UM WP25CT ................................ B61
DNMG150608UM WS10PT ................................ B61
DNMG150608UM WS25PT ................................ B61
DNMG150608UR WK20CT ................................. B62
DNMG150608UR WM15CT ................................ B62
DNMG150608UR WM25CT ................................ B62
DNMG150608UR WM35CT ................................ B62
DNMG150608UR WP15CT ................................. B62
DNMG150608UR WP25CT ................................. B62
DNMG150608UR WP35CT ................................. B62
DNMG150608UR WS25PT ................................. B62
DNMG1506122P TN10P .................................. B131
DNMG1506122P TN10U .................................. B131
DNMG1506122P TN15M ................................. B131
DNMG1506122P TN20K .................................. B131
DNMG1506122P TN20P .................................. B131
DNMG1506122P TN30M ................................. B131
DNMG1506124P TN15M ................................. B131
DNMG1506124P TN30M ................................. B131
DNMG1506126P TN10P .................................. B132
DNMG1506126P TN15M ................................. B132
DNMG1506126P TN20P .................................. B132
DNMG1506126P TN30M ................................. B132
DNMG1506126P TN30P .................................. B132
DNMG1506127N TN10P .................................. B133
DNMG1506127N TN20K .................................. B133
DNMG1506127N TN20P .................................. B133
DNMG1506127N TN30P .................................. B133
DNMG150612CT WM15CT ................................ B53
DNMG150612CT WM25CT ................................ B53
DNMG150612FF WK20CT ................................. B54
DNMG150612FF WM25CT ................................ B54
DNMG150612FF WP15CT ................................. B54
DNMG150612ML WK05CT ................................ B56
DNMG150612ML WK20CT ................................ B56
DNMG150612ML WP15CT ................................ B56
DNMG150612ML WP25CT ................................ B56
DNMG150612MR WM25CT ............................... B57
DNMG150612MR WM35CT ............................... B57
DNMG150612MR WP15CT ................................ B57
DNMG150612MR WP25CT ................................ B57
DNMG150612MR WP35CT ................................ B57
DNMG150612MS WS10PT ................................ B58
DNMG150612MS WS25PT ................................ B58
DNMG150612MS WU10HT ................................ B58
DNMG150612MW WK05CT ............................... B58
DNMG150612MW WM25CT .............................. B58
DNMG150612RH WK20CT................................. B59
DNMG150612RH WM25CT ................................ B59
DNMG150612RH WP15CT................................. B59
DNMG150612RH WP25CT................................. B59
DNMG150612RH WP35CT................................. B59
DNMG150612UF WM15CT ................................ B60
DNMG150612UF WM25CT ................................ B60
DNMG150612UM WM15CT ............................... B61
DNMG150612UM WM25CT ............................... B61
DNMG150612UM WM35CT ............................... B61
DNMG150612UM WS10PT ................................ B61
DNMG150612UM WS25PT ................................ B61
DNMG150612UR WK05CT ................................. B62
DNMG150612UR WK20CT ................................. B62
DNMG150612UR WM15CT ................................ B62
DNMG150612UR WM25CT ................................ B62
DNMG150612UR WM35CT ................................ B62
DNMG150612UR WP15CT ................................. B62
DNMG150612UR WP25CT ................................. B62
DNMG150612UR WP35CT ................................. B62
DNMG150616RH WK20CT................................. B59
DNMG150616RH WM25CT ................................ B59
DNMG150616RH WP15CT................................. B59
DNMG150616RH WP25CT................................. B59
DNMG150616RH WP35CT................................. B59
DNMG150616UM WM25CT ............................... B61
DNMG150616UM WM35CT ............................... B61
DNMG150616UR WK20CT ................................. B62
DNMG150616UR WM35CT ................................ B62
DNMG150616UR WP15CT ................................. B62
DNMG150616UR WP25CT ................................. B62
DNMG150616UR WP35CT ................................. B62
DNMG1906126P TN30P .................................. B132
DNMG1906127N TN20P .................................. B133
DNMG1906127N TN30P .................................. B133
DNMG190612RH WP15CT................................. B59
DNMG190612RH WP25CT................................. B59
DNMG190612RH WP35CT................................. B59
DNMM15060865 TN7115 ................................. B62
DNMM15060865 WM25CT ............................... B62
DNMM15060865 WP15CT ................................ B62
DNMM15060865 WP25CT ................................ B62
DNMM15060865 WP35CT ................................ B62
DNMM15061265 TN7115 ................................. B62
DNMM15061265 WM25CT ............................... B62
DNMM15061265 WP15CT ................................ B62
DNMM15061665 WP15CT ................................ B62
DNMM15061665 WP25CT ................................ B62
DNMP150404 WM15CT .................................... B63
DNMP150404 WM25CT .................................... B63
DNMP150404 WM35CT .................................... B63
DNMP150404 WS10PT ..................................... B63
DNMP150408 WM15CT .................................... B63
DNMP150408 WM25CT .................................... B63
DNMP150408 WM35CT .................................... B63
DNMP150408 WS10PT ..................................... B63
DNMP150412 WM15CT .................................... B63
DNMP150412 WM25CT .................................... B63
DNMP150412 WM35CT .................................... B63
DNMP150604 WM15CT .................................... B63
DNMP150604 WM25CT .................................... B63
DNMP150604 WM35CT .................................... B63
DNMP150604 WS10PT ..................................... B63
DNMP150608 WM15CT .................................... B63
DNMP150608 WM25CT .................................... B63
DNMP150608 WM35CT .................................... B63
DNMP150608 WS10PT ..................................... B63
DNMP150608 WS25PT ..................................... B63
DNMP150612 WM15CT .................................... B63
DNMP150612 WM25CT .................................... B63
DNMP150612 WM35CT .................................... B63
DNMP150612 WS10PT ..................................... B63
DNMP150612 WS25PT ..................................... B63
DNMS150404FST WDN00U ............................. B209
DNMS150404FST WDN25U ............................. B209
DNMS150408FST WDN00U ............................. B209
DNMS150408FST WDN25U ............................. B209
DPGW070202EC WBH25P ............................... B209
DPGW070202FST WDN00U ............................. B210
DPGW070202FST WDN25U ............................. B210
DPGW070204FST WDN00U ............................. B210
DPGW070204FST WDN25U ............................. B210
DPGW070204FWST WDN00U ......................... B210
DPGW070204FWST WDN25U ......................... B210
DPGW070204S01015C WBH25P .................... B209
DPGW070208S01015C WBH25P .................... B209
DPGW11T304FST WDN00U ............................. B210
DPGW11T304FST WDN25U ............................. B210
DPGW11T304FWST WDN00U .......................... B210
DPGW11T304FWST WDN25U .......................... B210
DPMT070204FP WM15CT ................................. B63
DPMT070204FP WM25CT ................................. B63
DPMT070204FP WP15CT .................................. B63
DPMT070204FP WP25CT .................................. B63
DPMT11T304FP WM15CT ................................. B63
DPMT11T304FP WM25CT ................................. B63
DPMT11T304FP WP15CT .................................. B63
DPMT11T304FP WP25CT .................................. B63
DPMT11T308FP WK20CT .................................. B63
DPMT11T308FP WM25CT ................................. B63
DPMT11T308FP WP15CT .................................. B63
DPMT11T308FP WP25CT .................................. B63
DPMT11T308MP WK20CT ................................. B64
DPMT11T308MP WP25CT ................................. B64
DQ1303002T WP15PE ......................................O54
DQ1303002W WP15PE ..................................... O54
DQ1304002T WP15PE ......................................O54
DQ1304002W WP15PE ..................................... O54
DQ1305002W WP15PE ..................................... O54
DQ1306002W WP15PE ..................................... O54
DQ1307003W WP15PE ..................................... O54
DQ1308003W WP15PE ..................................... O54
DQ1310004W WP15PE ..................................... O54
DQ1312005W WP15PE ..................................... O54
DQ1314014W WP15PE ..................................... O54
DQ1316006W WP15PE ..................................... O54
DQ1318018W WP15PE ..................................... O54
DQ1320007W WP15PE ..................................... O54
DRGNL3225P12KC04 WG ................................. C12
DRGNL4040S25KC09 WG ................................. C12
DRGNR2525M12KC04 WG ................................ C12
DRGNR3225P12KC04 WG ................................. C12
DRGNR4040S25KC09 WG ................................. C12
DSDNN2020K12KC04 WG ................................. C12
DSDNN2525M12KC04 WG ................................ C12
DSDNN2525M15KC06 WG ................................ C12
DSDNN3225P12KC04 WG ................................. C12
DSDNN3232P19KC06 WG ................................. C12
DSDNN4040S25KC09 WG ................................. C12
DSKNL2525M12KC04 WG ................................. C13
DSKNL3225P12KC04 WG .................................. C13
DSKNL3232P15KC06 WG .................................. C13
DSKNR2020K12KC04 WG ................................. C13
DSKNR2525M12KC04 WG................................. C13
DSKNR3225P12KC04 WG ................................. C13
DSKNR3232P15KC06 WG ................................. C13
DSKNR3232P19KC06 WG ................................. C13
DSM550 ............................................................ H65
DSRNL2525M12KC04 WG ................................. C14
DSRNL3232P15KC06 WG .................................. C14
DSRNL4040S25KC09 WG .................................. C14
DSRNR2020K12KC04 WG ................................. C14
DSRNR2525M12KC04 WG ................................ C14
DSRNR3232P15KC06 WG ................................. C14
DSRNR3232P19KC06 WG ................................. C14
DSRNR4040S25KC09 WG ................................. C14
DSSNL2020K12KC04 WG .................................. C15
DSSNL2525M12KC04 WG ................................. C15
DSSNL3225P12KC04 WG .................................. C15
DSSNL3232P15KC06 WG .................................. C15
DSSNL3232P19KC06 WG .................................. C15
DSSNR2020K12KC04 WG ................................. C15
DSSNR2525M12KC04 WG................................. C15
DSSNR2525M15KC06 WG................................. C15
DSSNR3225P12KC04 WG ................................. C15
DSSNR3232P15KC06 WG ................................. C15
DSSNR3232P19KC06 WG ................................. C15
DT15IP ......................................... J32–35, M11–12
DT9IP ............................................................. M4–6
DTFNL2020K16KC04 WG .................................. C16
DTFNL2525M16KC04 WG ................................. C16
DTFNL2525M22KC04 WG ................................. C16
DTFNL3225P16KC04 WG .................................. C16
DTFNL3225P22KC04 WG .................................. C16
DTFNR2020K16KC04 WG .................................. C16
DTFNR2525M16KC04 WG ................................. C16
DTFNR3232P27KC06 WG .................................. C16
DTGNL2020K16KC04 WG .................................. C16
DTGNL2525M16KC04 WG ................................. C16
DTGNR2020K16KC04 WG ................................. C16
DTGNR2525M16KC04 WG ................................ C16
DTGNR2525M22KC04 WG ................................ C16
DV40BRFX185060M WG .................................. W58
DV40BRFX245060M WG .................................. W58
DV40BRFX320060M WG .................................. W58
DV40BRFX420060M WG .................................. W58
DV40BRFX550065M WG .................................. W58
DV50BRFX320060M WG .................................. W59
DV50BRFX420060M WG .................................. W59
DV50BRFX550060M WG .................................. W59
DV50BRFX720065M WG .................................. W59
DVJNL2020K16KC04 WG .................................. C17
DVJNL2525M16KC04 WG ................................. C17
DVJNL2525M22KC04 WG ................................. C17
DVJNL3225P16KC04 WG .................................. C17
DVJNL3225P22KC04 WG .................................. C17
DVJNR2020K16KC04 WG .................................. C17
DVJNR2525M16KC04 WG ................................. C17
DVJNR2525M22KC04 WG ................................. C17
DVJNR3225P16KC04 WG .................................. C17
DVJNR3225P22KC04 WG .................................. C17
DVONL2020K16KC04 WG.................................. C18
DVONL2525M16KC04 WG ................................. C18
DVONL3225P16KC04 WG.................................. C18
DVONR2020K16KC04 WG ................................. C18
DVONR2525M16KC04 WG ................................ C18
DVONR3225P16KC04 WG ................................. C18
DVVNN2020K16KC04 WG ................................. C18
DVVNN2525M16KC04 WG................................. C18
DVVNN3225P16KC04 WG ................................. C18
DWLNL2020K06KC04 WG ................................. C19
DWLNL2020K08KC04 WG ................................. C19
DWLNL2525M06KC04 WG ................................ C19
DWLNL2525M08KC04 WG ................................ C19
DWLNL3225P08KC04 WG ................................. C19
DWLNL3232P08KC04 WG ................................. C19
Catalogue No. Page(s) Catalogue No. Page(s) Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 99 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRAND O b 28 2015 3 09 PM
Z100 widia.com
Index by Catalogue Number
Index
Catalogue No. Page(s)
DWLNR2020K06KC04 WG ................................. C19
DWLNR2020K08KC04 WG ................................. C19
DWLNR2525M06KC04 WG ................................ C19
DWLNR2525M08KC04 WG ................................ C19
DWLNR3225P08KC04 WG ................................. C19
DWLNR3232P08KC04 WG ................................. C19
E06JSCFPL04 WG ............................................. C67
E06JSCFPR04 WG ............................................. C67
E06JSCLPL04 WG ............................................. C70
E06JSCLPR04 WG ............................................. C70
E08KSCFCL06 WG ............................................. C66
E08KSCFCR06 WG............................................. C66
E08KSCFPL06A WG ........................................... C67
E08KSCFPR06A WG........................................... C67
E08KSCLCL06 WG ............................................. C68
E08KSCLCL065 WG ........................................... C68
E08KSCLCR06 WG............................................. C68
E08KSCLCR065 WG .......................................... C68
E08KSCLPL06A WG ........................................... C70
E08KSCLPR06A WG........................................... C70
E08KSTFPL09A WG ........................................... C79
E08KSTFPR09A WG ........................................... C79
E10MSCFPL06A WG .......................................... C67
E10MSCFPR06A WG .......................................... C67
E10MSCLCL06 WG ............................................ C68
E10MSCLCR06 .................................................. C68
E10MSCLPL06A WG .......................................... C70
E10MSCLPR06A WG .......................................... C70
E10MSTFCL11 WG ............................................ C77
E10MSTFCR11 WG ............................................ C77
E10MSTFPL11A WG .......................................... C79
E10MSTFPR11A WG .......................................... C79
E12QSCFPL06 WG ............................................. C67
E12QSCFPR06 WG ............................................ C67
E12QSCLCL06 WG ............................................ C68
E12QSCLCR06 WG ............................................ C68
E12QSCLPL06 WG ............................................. C70
E12QSCLPR06 WG ............................................ C70
E12QSDQCL07 WG ............................................ C72
E12QSDQCR07 WG............................................ C72
E12QSDUCL07 W .............................................. C74
E12QSDUCR07 W .............................................. C74
E12QSDUPL07 WG ............................................ C75
E12QSDUPR07 WG ............................................ C75
E12QSTFCL11 WG ............................................. C77
E12QSTFCR11 WG ............................................ C77
E12QSTFPL11 WG ............................................. C79
E12QSTFPR11 WG ............................................. C79
E16RSCLCL09 WG ............................................. C68
E16RSCLCL09T3 WG ......................................... C68
E16RSCLCR09 WG ............................................ C68
E16RSCLCR09T3 WG ........................................ C68
E16RSCLPL09 WG ............................................. C70
E16RSCLPR09 WG ............................................. C70
E16RSDQCL07 WG ............................................ C72
E16RSDQCR07 WG ............................................ C72
E16RSDUCL07 W ............................................... C74
E16RSDUCR07 W .............................................. C74
E16RSDUPL07 WG............................................. C75
E16RSDUPR07 WG ............................................ C75
E16RSTFCL16 WG ............................................. C77
E16RSTFCR16 WG ............................................. C77
E16RSTFPL11 WG ............................................. C79
E16RSTFPR11 WG ............................................. C79
E20SSCLCL09 WG ............................................. C68
E20SSCLCL09T3 WG ......................................... C68
E20SSCLCR09 WG............................................. C68
E20SSCLCR09T3 WG......................................... C68
E20SSCLPL09 WG ............................................. C70
E20SSCLPR09 WG ............................................. C70
E20SSDQCL11 WG ............................................ C72
E20SSDQCR11 WG ............................................ C72
E20SSDUCL11 W ............................................... C74
E20SSDUCR11 W .............................................. C74
E20SSDUPL11 WG ............................................. C75
E20SSDUPR11 WG ............................................ C75
E20SSTFCL16 WG ............................................. C77
E20SSTFCR16 WG ............................................. C77
E20SSTFPL16 WG ............................................. C79
E20SSTFPR16 WG ............................................. C79
E25TSCLCL09 WG ............................................. C68
E25TSCLCL09T3 WG ......................................... C68
E25TSCLCR09 WG ............................................. C68
E25TSCLCR09T3 WG ......................................... C68
E25TSDUCL11 W ............................................... C74
E25TSDUCR11 W ............................................... C74
E25TSTFCL16 WG ............................................. C77
E25TSTFCR16 WG ............................................. C77
E32USCLCR12 WG ............................................ C68
EDR100031E1W4 WDN00U ............................... H66
ENGN130704T02020 CW2015 ....................... B182
ENGN130708T02020 CW2015 ....................... B182
ENGN130712T02020 CW2015 ....................... B182
ENGN130716T02020 CW2015 ....................... B182
ENGX130716T02020 CW5025 ........................ B182
FBIT WG .............................................D59, D71, D84
FC11 ................................................................. D16
FC11 WG ............................ D14–17, D59, D71, D84
FC14 ...........................................................D15–17
FCBM51000L WG .............................................. D16
FCBM51000R WG .............................................. D16
FCBM51005L WG .............................................. D16
FCBM5312255L WG .......................................... D17
FCBM5312255R WG ......................................... D17
FCBM5312510L WG .......................................... D17
FCBM5312515L WG .......................................... D17
FCBM5316250R WG ......................................... D17
FCBM5316255L WG .......................................... D17
FCBM5316255R WG ......................................... D17
FCBM61520L WG .............................................. D16
FCBM61520R WG .............................................. D16
FCBM61525L WG .............................................. D16
FCBM61525R WG .............................................. D16
FCBM6612325L WG .......................................... D17
FCBM6612325R WG ......................................... D17
FCBM6612630R WG ......................................... D17
FCBM6612635R WG ......................................... D17
FCBM6616320R WG ......................................... D17
FCBM6616325L WG .......................................... D17
FCBM6616325R WG ......................................... D17
FCBM6616635R WG ......................................... D17
FCBM81520L WG .............................................. D16
FCBM81520R WG .............................................. D16
FCBM81525R WG .............................................. D16
FCBM8212385L WG .......................................... D17
FCBM8212385R WG ......................................... D17
FCBM8212790R WG ......................................... D17
FCBM8212795R WG ......................................... D17
FCBM8216380R WG ......................................... D17
FCBM8216385L WG .......................................... D17
FCBM8216790R WG ......................................... D17
FCBM8216795R WG ......................................... D17
FKEY WG............................................D59, D71, D84
FNR150472R CG5 ............................................. D56
FNT1512ACME2R CG5 ...................................... D57
FNT1528UN2R CG5 ........................................... D57
FSBM5212125L WG .......................................... D15
FSBM5212125R WG .......................................... D15
FSBM5212255R WG .......................................... D15
FSBM5216125R WG .......................................... D15
FSBM61000L WG .............................................. D14
FSBM61000R WG .............................................. D14
FSBM61005R WG .............................................. D14
FSBM6612195R WG .......................................... D15
FSBM6612320R WG .......................................... D15
FSBM6616190R WG .......................................... D15
FSBM6616195R WG .......................................... D15
FSBM6616320L WG .......................................... D15
FSBM6616325R WG .......................................... D15
FSBM81000L WG .............................................. D14
FSBM81005L WG .............................................. D14
FSBM8212250R WG .......................................... D15
FSBM8212380L WG .......................................... D15
FSBM8212380R WG .......................................... D15
FSBM8212385R WG .......................................... D15
FT15 ............................................................U42–43
FT20 .................................................................. U42
FT7 ..............................................................U42–43
FT8 ..............................................................U42–43
G100MTTB2066KM63 ....................................... C84
G50MTTB1026KM40 ......................................... C84
G60MTTB1226KM40 ......................................... C84
G80MTTB1564KM63 ......................................... C84
GCBMW51523L WG ..........................................D23
GCBMW51523R WG .......................................... D23
GCBMW61523L WG ..........................................D23
GCBMW61523R WG .......................................... D23
GCBMW81523L WG ..........................................D23
GCHT060202 CG5 ............................................. D46
GCHT060204 CG5 ............................................. D46
GCHT060204 CM1 ............................................ D46
GCHW060202 CG5 ............................................ D46
GCHW060202 CM1 ........................................... D46
GCHW060204 CG5 ............................................ D46
GCHW060204 CM1 ........................................... D46
GCPM10254225L WG ....................................... D27
GCPM10254225R WG ....................................... D27
GCPM102545L WG ........................................... D27
GCPM102545R WG ........................................... D27
GCPM12254225L WG ....................................... D27
GCPM12254225R WG ....................................... D27
GCPM122545L WG ........................................... D27
GCPM122545R WG ........................................... D27
GCPM16254225L WG ....................................... D27
GCPM16254225R WG ....................................... D27
GCPM162545L WG ........................................... D27
GCPM162545R WG ........................................... D27
GPHT050102 CG5 ............................................. D47
GPHT050102 CM1 ............................................ D47
GPHT050104 CG5 ............................................. D47
GPHT050104 CM1 ............................................ D47
GPHW050102 CG5 ............................................ D46
GPHW050102 CG6 ............................................ D46
GPHW050102 CM1 ........................................... D46
GPHW050104 CG5 ............................................ D46
GPHW050104 CG6 ............................................ D46
GPHW050104 CM1 ........................................... D46
GSBMW61003L WG .......................................... D23
GSBMW61003R WG .......................................... D23
GSBMW81003L WG .......................................... D23
GSBMW81003R WG .......................................... D23
GSPM101638225L WG ..................................... D26
GSPM1016385L WG.......................................... D26
GSPM131651225L WG ..................................... D26
GSPM1316515L WG.......................................... D26
GSPM1316515R WG ......................................... D26
GT005001 WP31MG ..........................................Y10
GT005002 WP31MG ..........................................Y10
GT005003 WP31MG ..........................................Y10
GT005004 WP31MG ..........................................Y10
GT005005 WP31MG ..........................................Y10
GT005006 WP31MG ..........................................Y10
GT005007 WP31MG ..........................................Y10
GT005008 WP31MG ..........................................Y10
GT005009 WP31MG ..........................................Y10
GT005010 WP31MG ..........................................Y10
GT005011 WP31MG ..........................................Y10
GT005012 WP31MG ..........................................Y10
GT005013 WP31MG ..........................................Y10
GT005014 WP31MG ..........................................Y10
GT005015 WP31MG ..........................................Y10
GT005016 WP31MG ..........................................Y10
GT005017 WP31MG ..........................................Y10
GT005018 WP31MG ..........................................Y10
GT025001 WP31MG ..........................................Y33
GT025002 WP31MG ..........................................Y33
GT025003 WP31MG ..........................................Y33
GT025004 WP31MG ..........................................Y33
GT025005 WP31MG ..........................................Y33
GT025006 WP31MG ..........................................Y33
GT025007 WP31MG ..........................................Y33
GT025008 WP31MG ..........................................Y33
GT025009 WP31MG ..........................................Y33
GT025010 WP31MG ..........................................Y33
GT025011 WP31MG ..........................................Y33
GT025012 WP31MG ..........................................Y33
GT025013 WP31MG ..........................................Y33
GT025014 WP31MG ..........................................Y33
GT025015 WP31MG ..........................................Y33
GT025016 WP31MG ..........................................Y33
GT025017 WP31MG ..........................................Y33
GT025018 WP31MG ..........................................Y33
GT045001 WH36MG ..........................................Y34
GT045002 WH36MG ..........................................Y34
GT045003 WH36MG ..........................................Y34
GT045004 WH36MG ..........................................Y34
GT045005 WH36MG ..........................................Y34
GT045006 WH36MG ..........................................Y34
GT045007 WH36MG ..........................................Y34
GT045008 WH36MG ..........................................Y34
GT045009 WH36MG ..........................................Y34
GT045010 WH36MG ..........................................Y34
GT045011 WH36MG ..........................................Y34
GT045012 WH36MG ..........................................Y34
GT045013 WH36MG ..........................................Y34
GT045014 WH36MG ..........................................Y34
GT045015 WH36MG ..........................................Y34
GT045016 WH36MG ..........................................Y34
GT045017 WH36MG ..........................................Y34
GT045018 WH36MG ..........................................Y34
GT065001 WS32MG ..........................................Y56
GT065002 WS32MG ..........................................Y56
GT065003 WS32MG ..........................................Y56
GT065004 WS32MG ..........................................Y56
GT065005 WS32MG ..........................................Y56
GT065006 WS32MG ..........................................Y56
GT065007 WS32MG ..........................................Y56
GT065008 WS32MG ..........................................Y56
GT065009 WS32MG ..........................................Y56
GT065010 WS32MG ..........................................Y56
GT105001 WS32MG ............................................Y7
GT105002 WS32MG ............................................Y7
Catalogue No. Page(s) Catalogue No. Page(s) Catalogue No. Page(s)
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 100 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRANDO b 28 20153 09PM
Z101
widia.com
Index by Catalogue Number
Catalogue No. Page(s)
GT105003 WS32MG ............................................Y7
GT105004 WS32MG ............................................Y7
GT105005 WS32MG ............................................Y7
GT105006 WS32MG ............................................Y7
GT105007 WS32MG ............................................Y7
GT105008 WS32MG ............................................Y7
GT105009 WS32MG ............................................Y7
GT105010 WS32MG ............................................Y7
GT125001 WS32MG ..........................................Y30
GT125002 WS32MG ..........................................Y30
GT125003 WS32MG ..........................................Y30
GT125004 WS32MG ..........................................Y30
GT125005 WS32MG ..........................................Y30
GT125006 WS32MG ..........................................Y30
GT125007 WS32MG ..........................................Y30
GT125008 WS32MG ..........................................Y30
GT125009 WS32MG ..........................................Y30
GT125010 WS32MG ..........................................Y30
GT145001 WN35MG ............................................Y8
GT145002 WN35MG ............................................Y8
GT145003 WN35MG ............................................Y8
GT145004 WN35MG ............................................Y8
GT145005 WN35MG ............................................Y8
GT145006 WN35MG ............................................Y8
GT145007 WN35MG ............................................Y8
GT165001 WN35MG ..........................................Y31
GT165002 WN35MG ..........................................Y31
GT165003 WN35MG ..........................................Y31
GT165004 WN35MG ..........................................Y31
GT165005 WN35MG ..........................................Y31
GT165006 WN35MG ..........................................Y31
GT165007 WN35MG ..........................................Y31
GT205077 GM6515 .............................................Y4
GT205078 GM6515 .............................................Y4
GT205079 GM6515 .............................................Y4
GT205080 GM6515 .............................................Y4
GT205081 GM6515 .............................................Y4
GT205082 GM6515 .............................................Y4
GT205083 GM6515 .............................................Y4
GT205084 GM6515 .............................................Y4
GT205085 GM6515 .............................................Y4
GT205086 GM6515 .............................................Y4
GT205087 GM6515 .............................................Y4
GT205088 GM6515 .............................................Y4
GT205089 GM6515 .............................................Y4
GT205090 GM6515 .............................................Y4
GT205091 GM6515 .............................................Y4
GT205092 GM6515 .............................................Y4
GT205093 GM6515 .............................................Y4
GT205094 GP6520 ..............................................Y4
GT205095 GP6520 ..............................................Y4
GT205096 GP6520 ..............................................Y4
GT205097 GP6520 ..............................................Y4
GT205098 GP6520 ..............................................Y4
GT205099 GP6520 ..............................................Y4
GT205100 GP6520 ..............................................Y4
GT205101 GP6520 ..............................................Y4
GT205102 GP6520 ..............................................Y4
GT205103 GP6520 ..............................................Y4
GT205104 GP6520 ..............................................Y4
GT205105 GP6520 ..............................................Y4
GT205106 GP6520 ..............................................Y4
GT205107 GP6520 ..............................................Y4
GT205108 GP6520 ..............................................Y4
GT205109 GP6520 ..............................................Y4
GT205110 GP6520 ..............................................Y4
GT205111 GP6520 ..............................................Y4
GT205113 GP6520 ..............................................Y4
GT205114 GP6520 ..............................................Y4
GT205116 GP6520 ..............................................Y4
GT205118 GP6520 ..............................................Y4
GT205122 GP6520 ..............................................Y5
GT205124 GP6520 ..............................................Y5
GT205125 GP6520 ..............................................Y5
GT205127 GP6520 ..............................................Y5
GT205129 GP6520 ..............................................Y5
GT21 WG ............................D26–27, D59, D71, D84
GT215001 GM6515 .............................................Y6
GT215002 GM6515 .............................................Y6
GT215003 GM6515 .............................................Y6
GT215004 GM6515 .............................................Y6
GT215005 GM6515 .............................................Y6
GT215006 GM6515 .............................................Y6
GT215007 GP6520 ..............................................Y6
GT215008 GP6520 ..............................................Y6
GT215009 GP6520 ..............................................Y6
GT215010 GP6520 ..............................................Y6
GT215011 GP6520 ..............................................Y6
GT215012 GP6520 ..............................................Y6
GT225001 WN38MG ..........................................Y62
GT225002 WN38MG ..........................................Y62
GT225003 WN38MG ..........................................Y62
GT225004 WN38MG ..........................................Y62
GT225005 WN38MG ..........................................Y62
GT225006 WN38MG ..........................................Y62
GT225007 WN38MG ..........................................Y62
GT225008 WN38MG ..........................................Y62
GT225009 WN38MG ..........................................Y62
GT225010 WN38MG ..........................................Y62
GT225011 WN38MG ..........................................Y62
GT225012 WN38MG ..........................................Y62
GT225013 WN38MG ..........................................Y62
GT225014 WN38MG ..........................................Y62
GT225015 WN38MG ..........................................Y62
GT225016 WP31MG ..........................................Y62
GT225017 WP31MG ..........................................Y62
GT225018 WP31MG ..........................................Y62
GT225019 WP31MG ..........................................Y62
GT225020 WP31MG ..........................................Y62
GT225021 WP31MG ..........................................Y62
GT225022 WP31MG ..........................................Y62
GT225023 WP31MG ..........................................Y62
GT225024 WP31MG ..........................................Y62
GT225025 WP31MG ..........................................Y62
GT225026 WP31MG ..........................................Y62
GT225027 WP31MG ..........................................Y62
GT225028 WP31MG ..........................................Y62
GT225029 WP31MG ..........................................Y62
GT225030 WP31MG ..........................................Y62
GT235001 WN38MG ..........................................Y63
GT235002 WN38MG ..........................................Y63
GT235003 WN38MG ..........................................Y63
GT235004 WN38MG ..........................................Y63
GT235005 WN38MG ..........................................Y63
GT235006 WN38MG ..........................................Y63
GT235007 WN38MG ..........................................Y63
GT235008 WN38MG ..........................................Y63
GT235009 WN38MG ..........................................Y63
GT235010 WN38MG ..........................................Y63
GT235011 WN38MG ..........................................Y63
GT235012 WP31MG ..........................................Y63
GT235013 WP31MG ..........................................Y63
GT235014 WP31MG ..........................................Y63
GT235015 WP31MG ..........................................Y63
GT235016 WP31MG ..........................................Y63
GT235017 WP31MG ..........................................Y63
GT235018 WP31MG ..........................................Y63
GT235019 WP31MG ..........................................Y63
GT235020 WP31MG ..........................................Y63
GT235021 WP31MG ..........................................Y63
GT235022 WP31MG ..........................................Y63
GT305079 GM6515 ...........................................Y20
GT305080 GM6515 ...........................................Y20
GT305081 GM6515 ...........................................Y20
GT305082 GM6515 ...........................................Y20
GT305083 GM6515 ...........................................Y20
GT305084 GM6515 ...........................................Y20
GT305085 GM6515 ...........................................Y20
GT305086 GM6515 ...........................................Y20
GT305087 GM6515 ...........................................Y20
GT305088 GM6515 ...........................................Y20
GT305089 GM6515 ...........................................Y20
GT305090 GM6515 ...........................................Y20
GT305091 GM6515 ...........................................Y20
GT305092 GM6515 ...........................................Y20
GT305093 GM6515 ...........................................Y20
GT305094 GM6515 ...........................................Y20
GT305095 GM6515 ...........................................Y20
GT305096 GM6515 ...........................................Y20
GT305097 GP6520 ............................................Y20
GT305098 GP6520 ............................................Y20
GT305099 GP6520 ............................................Y20
GT305100 GP6520 ............................................Y20
GT305101 GP6520 ............................................Y20
GT305102 GP6520 ............................................Y20
GT305103 GP6520 ............................................Y20
GT305104 GP6520 ............................................Y20
GT305105 GP6520 ............................................Y20
GT305106 GP6520 ............................................Y20
GT305107 GP6520 ............................................Y20
GT305108 GP6520 ............................................Y20
GT305109 GP6520 ............................................Y20
GT305110 GP6520 ............................................Y20
GT305111 GP6520 ............................................Y20
GT305112 GP6520 ............................................Y20
GT305113 GP6520 ............................................Y20
GT305114 GP6520 ............................................Y20
GT305115 GP6520 ............................................Y20
GT305116 GP6505 ............................................Y20
GT305117 GP6505 ............................................Y20
GT305118 GP6505 ............................................Y20
GT305119 GP6505 ............................................Y20
GT305120 GP6505 ............................................Y20
GT305121 GP6505 ............................................Y20
GT305122 GP6505 ............................................Y20
GT305123 GP6505 ............................................Y20
GT305124 GP6505 ............................................Y20
GT305148 GM6515 ...........................................Y20
GT305151 GP6520 ............................................Y21
GT305153 GP6520 ............................................Y21
GT305154 GP6520 ............................................Y21
GT305156 GP6520 ............................................Y21
GT305158 GP6520 ............................................Y21
GT305161 GP6520 ............................................Y20
GT305163 GP6520 ............................................Y20
GT305164 GP6520 ............................................Y20
GT305166 GP6520 ............................................Y20
GT305168 GP6520 ............................................Y20
GT315001 GM6515 ...........................................Y22
GT315002 GM6515 ...........................................Y22
GT315003 GM6515 ...........................................Y22
GT315004 GM6515 ...........................................Y22
GT315005 GM6515 ...........................................Y22
GT315006 GM6515 ...........................................Y22
GT315007 GP6520 ............................................Y22
GT315008 GP6520 ............................................Y22
GT315009 GP6520 ............................................Y22
GT315010 GP6520 ............................................Y22
GT315011 GP6520 ............................................Y22
GT315012 GP6520 ............................................Y22
GT315014 GP6520 ............................................Y23
GT315016 GP6520 ............................................Y23
GT315017 GP6520 ............................................Y23
GT315019 GP6520 ............................................Y23
GT315021 GP6520 ............................................Y23
GT315025 GP6520 ............................................Y22
GT315027 GP6520 ............................................Y22
GT315028 GP6520 ............................................Y22
GT315030 GP6520 ............................................Y22
GT315032 GP6520 ............................................Y22
GT315033 GP6520 ............................................Y22
GT315034 GP6520 ............................................Y22
GT315035 GP6520 ............................................Y22
GT325001 GP6520 ............................................Y24
GT325002 GP6520 ............................................Y24
GT325003 GP6520 ............................................Y24
GT325004 GP6520 ............................................Y24
GT325005 GP6520 ............................................Y24
GT325006 GP6520 ............................................Y24
GT325007 GP6520 ............................................Y24
GT325008 GP6520 ............................................Y24
GT325009 GP6520 ............................................Y24
GT335001 GP6520 ............................................Y25
GT335002 GP6520 ............................................Y25
GT335003 GP6520 ............................................Y25
GT335004 GP6520 ............................................Y25
GT335005 GP6520 ............................................Y25
GT335006 GP6520 ............................................Y25
GT335007 GP6520 ............................................Y25
GT335008 GP6520 ............................................Y25
GT335009 GP6520 ............................................Y25
GT405001 GP6520 ............................................Y52
GT405002 GP6520 ............................................Y52
GT405003 GP6520 ............................................Y52
GT405004 GP6520 ............................................Y52
GT405005 GP6520 ............................................Y52
GT405006 GP6520 ............................................Y52
GT405007 GP6520 ............................................Y52
GT405008 GP6520 ............................................Y52
GT405009 GP6520 ............................................Y52
GT405010 GP6520 ............................................Y52
GT405011 GP6520 ............................................Y52
GT405057 GP6520 ............................................Y52
GT405058 GP6520 ............................................Y52
GT405059 GP6520 ............................................Y52
GT415001 GP6520 ............................................Y53
GT415002 GP6520 ............................................Y53
GT415003 GP6520 ............................................Y53
GT415004 GP6520 ............................................Y53
GT415005 GP6520 ............................................Y53
GT415006 GP6520 ............................................Y53
GT415007 GP6520 ............................................Y53
GT415008 GP6520 ............................................Y53
GT415009 GP6520 ............................................Y53
GT415010 GP6520 ............................................Y53
GT415021 GP6520 ............................................Y53
GT415022 GP6520 ............................................Y53
GT415023 GP6520 ............................................Y53
GT425001 GP6520 ............................................Y54
GT425002 GP6520 ............................................Y54
GT425003 GP6520 ............................................Y54
GT425004 GP6520 ............................................Y54
Catalogue No. Page(s) Catalogue No. Page(s) Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 101 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRAND O b 28 2015 3 09 PM
Z102 widia.com
Index by Catalogue Number
Index
Catalogue No. Page(s)
GT425005 GP6520 ............................................Y54
GT425006 GP6520 ............................................Y54
GT425007 GP6520 ............................................Y54
GT425008 GP6520 ............................................Y54
GT425009 GP6520 ............................................Y54
GT425010 GP6520 ............................................Y54
GT425011 GP6520 ............................................Y54
GT425012 GP6520 ............................................Y54
GT435001 GP6520 ............................................Y55
GT435002 GP6520 ............................................Y55
GT435003 GP6520 ............................................Y55
GT435004 GP6520 ............................................Y55
GT435005 GP6520 ............................................Y55
GT435006 GP6520 ............................................Y55
GT435007 GP6520 ............................................Y55
GT435008 GP6520 ............................................Y55
GT435009 GP6520 ............................................Y55
GT435010 GP6520 ............................................Y55
GT435011 GP6520 ............................................Y55
GT435012 GP6520 ............................................Y55
GT505001 GP6520 ............................................Y26
GT505002 GP6520 ............................................Y26
GT505003 GP6520 ............................................Y26
GT505004 GP6520 ............................................Y26
GT505005 GP6520 ............................................Y26
GT505006 GP6520 ............................................Y27
GT505007 GP6520 ............................................Y27
GT505008 GP6520 ............................................Y27
GT505009 GP6520 ............................................Y27
GT505010 GP6520 ............................................Y27
GT515001 GP6520 ............................................Y28
GT515002 GP6520 ............................................Y28
GT515003 GP6520 ............................................Y28
GT515004 GP6520 ............................................Y28
GT515005 GP6520 ............................................Y28
GT515006 GP6520 ............................................Y29
GT515007 GP6520 ............................................Y29
GT515008 GP6520 ............................................Y29
GT515009 GP6520 ............................................Y29
GT515010 GP6520 ............................................Y29
GT705001 WN48EG .............................................Y9
GT705002 WN48EG .............................................Y9
GT705003 WN48EG .............................................Y9
GT705004 WN48EG .............................................Y9
GT705005 WN48EG .............................................Y9
GT705006 WN48EG .............................................Y9
GT705007 WN48EG .............................................Y9
GT705008 WN48EG .............................................Y9
GT805001 WN48EG ...........................................Y32
GT805002 WN48EG ...........................................Y32
GT805003 WN48EG ...........................................Y32
GT805004 WN48EG ...........................................Y32
GT805005 WN48EG ...........................................Y32
GT805006 WN48EG ...........................................Y32
GT805007 WN48EG ...........................................Y32
GT805008 WN48EG ...........................................Y32
GT805009 WN48EG ...........................................Y32
GTKEY WG .........................................D59, D71, D84
GTM115001 WU13PV .........................................Y69
GTM115002 WU13PV .........................................Y69
GTM115003 WU13PV .........................................Y69
GTM115004 WU13PV .........................................Y69
GTM115005 WU13PV .........................................Y69
GTM115006 WU13PV .........................................Y69
GTM115007 WU13PV .........................................Y69
GTM115008 WU13PV .........................................Y69
GTM115009 WU13PV .........................................Y69
GTM115010 WU13PV .........................................Y69
GTM115011 WU13PV .........................................Y69
GTM115012 WU13PV .........................................Y69
GTM115013 WU13PV .........................................Y69
GTM115014 WU13PV .........................................Y69
GTM115015 WU13PV .........................................Y69
GTM115016 WU13PV .........................................Y69
GTM115017 WU13PV .........................................Y69
GTM115018 WU13PV .........................................Y69
GTM115019 WU13PV .........................................Y69
GTM115020 WU13PV .........................................Y69
GTM115021 WU13PV .........................................Y69
GTM115022 WU13PV .........................................Y69
GTM115023 WU13PV .........................................Y69
GTM215001 WU12PV .........................................Y71
GTM215002 WU12PV .........................................Y71
GTM215003 WU12PV .........................................Y71
GTM215004 WU12PV .........................................Y71
GTM215005 WU12PV .........................................Y71
GTM215006 WU12PV .........................................Y71
GTM215007 WU12PV .........................................Y71
GTM215008 WU12PV .........................................Y71
GTM215009 WU12PV .........................................Y71
GTM215010 WU12PV .........................................Y71
GTM215011 WU12PV .........................................Y71
GTM215012 WU12PV .........................................Y71
GTM215013 WU12PV .........................................Y71
GTM215014 WU12PV .........................................Y71
GTM215015 WU12PV .........................................Y71
GTM215016 WU12PV .........................................Y71
GTM215017 WU12PV .........................................Y70
GTM215018 WU12PV .........................................Y70
GTM215019 WU12PV .........................................Y70
GTM215020 WU12PV .........................................Y70
GTM215021 WU12PV .........................................Y70
GTM215022 WU12PV .........................................Y70
GTM215023 WU12PV .........................................Y70
GTM215024 WU12PV .........................................Y70
GTM215025 WU12PV .........................................Y70
GTM215026 WU12PV .........................................Y70
GTM215027 WU12PV .........................................Y70
GTM215028 WU12PV .........................................Y70
GTM215029 WU12PV .........................................Y70
GTM215030 WU12PV .........................................Y70
GTM215031 WU12PV .........................................Y70
GTM315001 WU12PV .........................................Y73
GTM315002 WU12PV .........................................Y73
GTM315003 WU12PV .........................................Y73
GTM315004 WU12PV .........................................Y73
GTM315005 WU12PV .........................................Y73
GTM315006 WU12PV .........................................Y73
GTM315007 WU12PV .........................................Y73
GTM315008 WU12PV .........................................Y73
GTM315009 WU12PV .........................................Y73
GTM315010 WU12PV .........................................Y73
GTM315011 WU12PV .........................................Y73
GTM315012 WU12PV .........................................Y73
GTM315013 WU12PV .........................................Y73
GTM315014 WU12PV .........................................Y73
GTM315015 WU12PV .........................................Y73
GTM315016 WU12PV .........................................Y73
GTM315017 WU12PV .........................................Y72
GTM315018 WU12PV .........................................Y72
GTM315019 WU12PV .........................................Y72
GTM315020 WU12PV .........................................Y72
GTM315021 WU12PV .........................................Y72
GTM315022 WU12PV .........................................Y72
GTM315023 WU12PV .........................................Y72
GTM315024 WU12PV .........................................Y72
GTM315025 WU12PV .........................................Y72
GTM315026 WU12PV .........................................Y72
GTM315027 WU12PV .........................................Y72
GTM315028 WU12PV .........................................Y72
GTM315029 WU12PV .........................................Y72
GTM315030 WU12PV .........................................Y72
GTM415001 WU16PV .........................................Y75
GTM415002 WU16PV .........................................Y75
GTM415003 WU16PV .........................................Y75
GTM415004 WU16PV .........................................Y75
GTM415005 WU16PV .........................................Y75
GTM415006 WU16PV .........................................Y75
GTM415007 WU16PV .........................................Y75
GTM415008 WU16PV .........................................Y75
GTM415009 WU16PV .........................................Y75
GTM415010 WU16PV .........................................Y75
GTM415011 WU16PV .........................................Y75
GTM415012 WU16PV .........................................Y75
GTM415013 WU16PV .........................................Y75
GTM415014 WU16PV .........................................Y75
GTM415015 WU16PV .........................................Y75
GTM415016 WU16PV .........................................Y75
GTM415017 WU16PV .........................................Y75
GTM415018 WU16PV .........................................Y75
GTM415019 WU16PV .........................................Y75
GTM415020 WU16PV .........................................Y75
GTM415021 WU16PV .........................................Y75
GTM415022 WU16PV .........................................Y75
GTM415023 WU16PV .........................................Y75
GTM415024 WU16PV .........................................Y75
GTM415025 WU16PV .........................................Y74
GTM415026 WU16PV .........................................Y74
GTM415027 WU16PV .........................................Y74
GTM415028 WU16PV .........................................Y74
GTM415029 WU16PV .........................................Y74
GTM415030 WU16PV .........................................Y74
GTM415031 WU16PV .........................................Y74
GTM415032 WU16PV .........................................Y74
GTM415033 WU16PV .........................................Y74
GTM415034 WU16PV .........................................Y74
GTM415035 WU16PV .........................................Y74
GTM415036 WU16PV .........................................Y74
GTM415037 WU16PV .........................................Y74
GTM415038 WU16PV .........................................Y74
GTM415039 WU16PV .........................................Y74
GTM415040 WU16PV .........................................Y74
GTM415041 WU16PV .........................................Y76
GTM415042 WU16PV .........................................Y76
GTM415043 WU16PV .........................................Y76
GTM415044 WU16PV .........................................Y76
GTM415045 WU16PV .........................................Y76
GTM415046 WU16PV .........................................Y76
GTM415047 WU16PV .........................................Y76
GX105001 WH16PG ...........................................Y46
GX105002 WH16PG ...........................................Y46
GX105003 WH16PG ...........................................Y46
GX105004 WH16PG ...........................................Y46
GX105005 WH16PG ...........................................Y46
GX105006 WH16PG ...........................................Y46
GX105007 WH16PG ...........................................Y46
GX105008 WH16PG ...........................................Y46
GX105009 WH16PG ...........................................Y46
GX105010 WH16PG ...........................................Y46
GX105011 WH16PG ...........................................Y46
GX105012 WH16PG ...........................................Y46
GX105013 WH16PG ...........................................Y46
GX352733 WK12PG ...........................................Y47
GX352734 WK12PG ...........................................Y47
GX352735 WK12PG ...........................................Y47
GX352737 WK12PG ...........................................Y47
GX352738 WK12PG ...........................................Y47
GX352739 WK12PG ...........................................Y47
GX352740 WK12PG ...........................................Y47
GX352741 WK12PG ...........................................Y47
GX355006 WK12PG ...........................................Y48
GX355007 WK12PG ...........................................Y48
GX355008 WK12PG ...........................................Y48
GX355009 WK12PG ...........................................Y48
GX355010 WK12PG ...........................................Y48
GX355012 WK12PG ...........................................Y48
GX355014 WK12PG ...........................................Y48
GX355101 WK12PG ...........................................Y48
GX355102 WK12PG ...........................................Y48
GX355121 WK12PG ...........................................Y48
GX355122 WK12PG ...........................................Y48
GX355141 WK12PG ...........................................Y48
GX355142 WK12PG ...........................................Y48
GX472866 WN14PG ...........................................Y50
GX472867 WN14PG ...........................................Y50
GX472868 WN14PG ...........................................Y50
GX472870 WN14PG ...........................................Y50
GX472872 WN14PG ...........................................Y50
GX472873 WN14PG ...........................................Y50
GX472874 WN14PG ...........................................Y50
GX472875 WN14PG ...........................................Y50
GX475006 WN14PG ...........................................Y49
GX475008 WN14PG ...........................................Y49
GX475010 WN14PG ...........................................Y49
GX492908 WN14PG ...........................................Y61
GX492909 WN14PG ...........................................Y61
GX492911 WN14PG ...........................................Y61
GX492914 WN14PG ...........................................Y61
GX492915 WN14PG ...........................................Y61
GX495006 WN14PG ...........................................Y60
GX495008 WN14PG ...........................................Y60
GX495010 WN14PG ...........................................Y60
GX505004 WK12PG ...........................................Y51
GX505005 WK12PG ...........................................Y51
GX505006 WK12PG ...........................................Y51
GX505008 WK12PG ...........................................Y51
GX505010 WK12PG ...........................................Y51
GX505012 WK12PG ...........................................Y51
GX505014 WK12PG ...........................................Y51
HDWM5EU4DD .................................................. H64
HDWM5S ........................................................... H65
HNEC0905ANSN WK25YM ................................. H35
HNGJ070432ANENLD TN6510 ............H8, H16, H21
HNGJ070432ANENLD TN6525 ............H8, H16, H21
HNGJ070432ANENLD TN6540 ............H8, H16, H21
HNGJ0704ANENLD TN6505.................H8, H16, H21
HNGJ0704ANENLD TN6510.................H8, H16, H21
HNGJ0704ANENLD TN6520.................H8, H16, H21
HNGJ0704ANENLD TN6525.................H8, H16, H21
HNGJ0704ANENLD TN6540.................H8, H16, H21
HNGJ0704ANENLD WP25PM ...............H8, H16, H21
HNGJ0704ANENLD WP35CM ..............H8, H16, H21
HNGJ0704ANENLD WP40PM ...............H8, H16, H21
HNGJ0704ANENLD WS30PM ...............H8, H16, H21
HNGJ0704ANFNLDJ THM-U .................H8, H16, H21
HNGJ0704ANFNLDJ TN6501 ...............H8, H16, H21
HNGJ090543ANSNHD TN6520 ..........H28, H34, H40
HNGJ090543ANSNHD TN6525 ..........H28, H34, H40
HNGJ090543ANSNHD TN6540 ..........H28, H34, H40
HNGJ0905ANENLD TN6520.......................H33, H39
HNGJ0905ANENLD TN6525.......................H33, H39
HNGJ0905ANENLD TN6540.......................H33, H39
Catalogue No. Page(s) Catalogue No. Page(s) Catalogue No. Page(s)
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 102 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRANDO b 28 20153 09PM
Z103
widia.com
Index by Catalogue Number
Catalogue No. Page(s)
HNGJ0905ANENLD TN7535.......................H33, H39
HNGJ0905ANENLD WP25PM ..................... H33, H39
HNGJ0905ANENLD WP35CM .................... H33, H39
HNGJ0905ANENLD WP40PM ..................... H33, H39
HNGJ0905ANENLD WS30PM ..................... H33, H39
HNGJ0905ANFNLDJ THM-U ...............H27, H33, H39
HNGJ0905ANFNLDJ TN6501 .............H27, H33, H39
HNGJ0905ANSNGD TN6520 ..............H28, H34, H40
HNGJ0905ANSNGD TN6525 ..............H28, H34, H40
HNGJ0905ANSNGD TN6540 ..............H28, H34, H40
HNGJ0905ANSNGD TN7535 ..............H28, H34, H40
HNGJ0905ANSNGD WK15CM ............H28, H34, H40
HNGJ0905ANSNGD WP35CM ............H28, H34, H40
HNGJ0905ANSNGD WP40PM ............H28, H34, H40
HNGJ0905ANSNGD WS30PM ............H28, H34, H40
HNGJ0905ANSNHD TN6520 ..............H28, H34, H40
HNGJ0905ANSNHD TN6525 ..............H28, H34, H40
HNGJ0905ANSNHD TN6540 ..............H28, H34, H40
HNGJ0905ANSNHD WP25PM ............H28, H34, H40
HNGJ0905ANSNHD WP35CM ............H28, H34, H40
HNGJ0905ANSNHD WP40PM ............H28, H34, H40
HNPJ070432ANSNHD TN6510 ............H9, H17, H22
HNPJ070432ANSNHD TN6520 ............H9, H17, H22
HNPJ070432ANSNHD TN6540 ............H9, H17, H22
HNPJ070432ANSNHD TN7535 ............H9, H17, H22
HNPJ070432ANSNHD WP40PM ..........H9, H17, H22
HNPJ0704ANSNGD TN6510 ................H9, H17, H22
HNPJ0704ANSNGD TN6520 ................H9, H17, H22
HNPJ0704ANSNGD TN6540 ................H9, H17, H22
HNPJ0704ANSNGD TN7535 ................H9, H17, H22
HNPJ0704ANSNGD WK15CM ..............H9, H17, H22
HNPJ0704ANSNGD WP25PM ..............H9, H17, H22
HNPJ0704ANSNGD WP35CM ..............H9, H17, H22
HNPJ0704ANSNGD WP40PM ..............H9, H17, H22
HNPJ0704ANSNGD WS30PM ..............H9, H17, H22
HNPJ0704ANSNHD TN6510 ................H9, H17, H22
HNPJ0704ANSNHD TN6520 ................H9, H17, H22
HNPJ0704ANSNHD TN6540 ................H9, H17, H22
HNPJ0704ANSNHD TN7535 ................H9, H17, H22
HNPJ0704ANSNHD WK15CM ..............H9, H17, H22
HNPJ0704ANSNHD WP25PM ..............H9, H17, H22
HNPJ0704ANSNHD WP35CM ..............H9, H17, H22
HNPJ0704ANSNHD WP40PM ..............H9, H17, H22
HNPJ090543ANSNHD TN6520 ..........H28, H34, H40
HNPJ090543ANSNHD TN6540 ..........H28, H34, H40
HNPJ090543ANSNHD WP25PM ........H28, H34, H40
HNPJ090543ANSNHD WP35CM ........H28, H34, H40
HNPJ090543ANSNHD WP40PM ........H28, H34, H40
HNPJ0905ANSNGD TN6520 ..............H27, H34, H40
HNPJ0905ANSNGD TN6540 ..............H27, H34, H40
HNPJ0905ANSNGD TN7535 ..............H27, H34, H40
HNPJ0905ANSNGD WK15CM ............H27, H34, H40
HNPJ0905ANSNGD WP25PM ............H27, H34, H40
HNPJ0905ANSNGD WP35CM ............H27, H34, H40
HNPJ0905ANSNGD WP40PM ............H27, H34, H40
HNPJ0905ANSNHD TN6520 ..............H28, H34, H40
HNPJ0905ANSNHD TN6540 ..............H28, H34, H40
HNPJ0905ANSNHD WK15CM ............H28, H34, H40
HNPJ0905ANSNHD WP25PM ............H28, H34, H40
HNPJ0905ANSNHD WP35CM ............H28, H34, H40
HNPJ0905ANSNHD WP40PM ............H28, H34, H40
HPGT06T3DZENGD TN2510 .............................. H47
HPGT06T3DZENGD TN6510 .............................. H47
HPGT06T3DZENGD TN6525 .............................. H47
HPGT06T3DZENGD TN6540 .............................. H47
HPGT06T3DZENGD TN7525 .............................. H47
HPGT06T3DZENGD TN7535 .............................. H47
HPGT06T3DZENGD WK15CM ............................ H47
HPGT06T3DZENGD WP25PM............................. H47
HPGT06T3DZENGD WP40PM............................. H47
HPGT06T3DZENGD WS30PM............................. H47
HPGT06T3DZERGD3W TN6510 ......................... H47
HPGT06T3DZERGD3W TN6525 ......................... H47
HPGT06T3DZERGD3W TN7525 ......................... H47
HPGT06T3DZERGD3W WK15CM ....................... H47
HPGT06T3DZERGD3W WP25PM ....................... H47
HPGT06T3DZERGD3W WP40PM ....................... H47
HPGT06T3DZERLD TN2510 ............................... H46
HPGT06T3DZERLD TN6520 ............................... H46
HPGT06T3DZERLD TN6525 ............................... H46
HPGT06T3DZERLD TN6540 ............................... H46
HPGT06T3DZERLD TN7525 ............................... H46
HPGT06T3DZERLD WP25PM ............................. H46
HPGT06T3DZERLD WP40PM ............................. H46
HPGT06T3DZFRLDAL THM................................. H46
HPGT06T3DZFRLDAL THM-U ............................. H46
HPGT06T3DZFRLDAL TN6501 ........................... H46
HPPT06T3DZENGD TN6520 ............................... H47
HPPT06T3DZENGD TN6525 ............................... H47
HPPT06T3DZENGD TN6540 ............................... H47
HPPT06T3DZENGD TN7525 ............................... H47
HPPT06T3DZENGD TN7535 ............................... H47
HPPT06T3DZENGD WP25PM ............................. H47
HPPT06T3DZENGD WP35CM ............................. H47
HPPT06T3DZENGD WP40PM ............................. H47
HSK100ARFX420080M WG .............................. W63
HSK100ARFX550090M WG .............................. W63
HSK100ARFX720105M WG .............................. W63
HSK63ARFX185060M WG ................................ W62
HSK63ARFX245060M WG ................................ W62
HSK63ARFX320060M WG ................................ W62
HSK63ARFX420070M WG ................................ W62
HSK63ARFX550080M WG ................................ W62
HSK63ARFX720095M WG ................................ W62
ICSN332 K9 ......................................................... C9
ICSN432 K9 ................................................. C92–94
ICSN433 K9 ...........................................C8–10, C56
ICSN443 K9 ................................................... C8–10
ICSN533 K9 ....................................................... C56
ICSN543 K9 ................................................... C8–10
ICSN633 K9 ....................................................... C94
ICSN643 K9 ................................................... C8–10
ICSN846 K9 ......................................................... C9
IDSN322 K9 .........................................C11, C56–57
IDSN432 K9 .................................................C95–96
IDSN433 K9 .........................................C11, C56–57
IDSN443 K9 ....................................................... C11
IRSN44 K9 ......................................................... C12
IRSN84 K9 ......................................................... C12
ISSN432 K9 ...............................................C97–101
ISSN433 K9 .................................................C12–15
ISSN443 K9 .................................................C12–15
ISSN543 K9 .................................................C12–15
ISSN633 K9 .............................................C97, C101
ISSN643 K9 .................................................C12–15
ISSN846 K9 ............................................... C12, C14
ITSN322 K9 .............................................C102–103
ITSN323 K9 ...............................................C16, C58
ITSN433 K9 .....................................C16, C102–103
ITSN534 K9 .............................................C16, C102
IVSN322 K9 .........................................C17–18, C58
IVSN432 K9 ....................................................... C17
IWSN322 K9 ...................................................... C19
IWSN433 K9 ..............................................C19, C59
KLM33...............................................C92, C97–101
KLM33L ................................................... C102–103
KLM34L ................................................... C102–103
KLM34L9IP ....................................C9, C11, C16–19
KLM43........................................ C92–94, C97–101
KLM46.............................. C92, C94–96, C102–103
KLM4615IP ..................... C8–10, C12–15, C17, C19
KLM46L15IP ..................................................C8–16
KLM46S ....................................................C92–101
KLM54.........................................................C97–99
KLM58............................................................. C102
KLM5815IP ........................................................ C16
KLM58L15IP ....................................C8–10, C12–15
KLM68.............................................C94, C97, C101
KLM68L25IP ....................................C8–10, C12–15
KLM81025IP........................................C9, C12, C14
KLS32M ..........................................M12, M31, M36
KLS40M ..........................................M12, M36, W64
KM32TSFBH022029 WG .................................. W53
KM32TSFBH029038 WG .................................. W53
KM32TSFBH038050 WG .................................. W53
KM32TSTCHS022030 WG ................................ W37
KM32TSTCHS030039 WG ................................ W37
KM32TSTCHS039050 WG ................................ W37
KM40TSE16JNEL2 KWH .....................................F35
KM40TSE16JNER2 KWH .....................................F35
KM40TSFBH029038 WG .................................. W53
KM40TSFBH038050 WG .................................. W53
KM40TSFBH050065 WG .................................. W53
KM40TSFBHBB006022 WG .............................. W50
KM40TSLSEL16N ...............................................F71
KM40TSLSEL22N ...............................................F71
KM40TSLSEL27N ...............................................F71
KM40TSLSER16N ...............................................F71
KM40TSLSER22N ...............................................F71
KM40TSLSER27N ...............................................F71
KM40TSLSSL16 .................................................F72
KM40TSLSSL22 .................................................F72
KM40TSLSSL27 .................................................F72
KM40TSLSSR16 .................................................F72
KM40TSLSSR22 .................................................F72
KM40TSLSSR27 .................................................F72
KM40TSNEL2 .....................................................F28
KM40TSNEL3 .....................................................F28
KM40TSNEL4 .....................................................F28
KM40TSNER2 .....................................................F28
KM40TSNER3 .....................................................F28
KM40TSNER4 .....................................................F28
KM40TSNRL3045M ............................................F29
KM40TSNRR3045M............................................F29
KM40TSNSL2 .....................................................F29
KM40TSNSL3 .....................................................F29
KM40TSNSL4 .....................................................F29
KM40TSNSR2 .....................................................F29
KM40TSNSR3 .....................................................F29
KM40TSNSR4 .....................................................F29
KM40TSS10DLSEL11 .................................. F76–77
KM40TSS10DLSER11 .................................. F76–77
KM40TSS12ELSEL11................................... F76–77
KM40TSS12ELSER11 .................................. F76–77
KM40TSS12ENEL2 ...................................... F33–34
KM40TSS12ENER2 ...................................... F33–34
KM40TSS16FLSEL16 ................................... F76–77
KM40TSS16FLSER16 .................................. F76–77
KM40TSS16FNEL2 ...................................... F33–34
KM40TSS16FNER2 ...................................... F33–34
KM40TSS20GLSEL16 .................................. F76–77
KM40TSS20GLSER16 .................................. F76–77
KM40TSS20GNEL2 ...................................... F33–34
KM40TSS20GNER2 ..................................... F33–34
KM40TSS25ENEL2 ...................................... F33–34
KM40TSS25ENEL3 ...................................... F33–34
KM40TSS25ENER2 ...................................... F33–34
KM40TSS25ENER3 ...................................... F33–34
KM40TSS25HLSEL16 .................................. F76–77
KM40TSS25HLSER16 .................................. F76–77
KM40TSS25HNEL2 ...................................... F33–34
KM40TSS25HNEL3 ...................................... F33–34
KM40TSS25HNER2...................................... F33–34
KM40TSS25HNER3...................................... F33–34
KM40TSS32GNEL3 ...................................... F33–34
KM40TSS32GNER3 ..................................... F33–34
KM40TSS32JLSEL16 ................................... F76–77
KM40TSS32JLSEL22 ................................... F76–77
KM40TSS32JLSER16 .................................. F76–77
KM40TSS32JLSER22 .................................. F76–77
KM40TSS32JNEL3 ...................................... F33–34
KM40TSS32JNER3 ...................................... F33–34
KM40TSTCHS030039 WG ................................ W37
KM40TSTCHS039050 WG ................................ W37
KM40TSTCHS050067 WG ................................ W37
KM50TSFBH050065 WG .................................. W53
KM50TSFBH065088 WG .................................. W53
KM50TSTCHS050067 WG ................................ W37
KM50TSTCHS067088 WG ................................ W37
KM63TSFBH065088 WG .................................. W53
KM63TSFBH088115 WG .................................. W53
KM63TSTCHS067088 WG ................................ W37
KM63TSTCHS088115 WG ................................ W37
KMSP315IP ..................................C9, C11, C16–19,
C56–58
KMSP39IP ................................................... C9, C19
KMSP415IP .................... C8–17, C19, C56–57, C59
KMSP515IP ............................ C8–10, C12–16, C56
KMSP625IP .....................................C8–10, C12–15
KMSP825IP .........................................C9, C12, C14
KUAM20 .............................. C110–111, C113–117,
C119, C126–129
KUAM22 ...................C92–94, C97–103, C106–109
KUAM23 .................... C104–105, C112, C119–122,
C124, C126–129
KUAM25 ...........C92–103, C109, C112, C120, C124
KUAM26 ................................................C102, C108
KUAM27 ..........................................C94, C97, C101
KUAM28 ........................ C92, C97–101, C104–110,
C112–113, C118–121, C123–129
KUAM30 ........................ C92, C97–101, C106–110,
C112–113, C118–121, C123–129
KUAM31 .......................... C92–94, C97–109, C112,
C119–122, C124, C126–129
KUAM32 ...................... C92–105, C108–109, C112,
C120, C124
KUAM33 .......................................................... C101
KUAM34 .............................. C110–111, C113–117,
C119, C126–129
KUAM35 ............................. C110, C113, C115–116
LNUX19194013 WK20CT .................................. B64
LNUX191940T WK20CT ..................................... B65
LNUX30194013 WK20CT .................................. B64
LNUX301940T WK20CT ..................................... B65
LNUX400924EN95 TTR ...................................... B64
LS103 ............................................................... H64
LTM16 WG .........................................D59, D71, D84
M1200D025Z02A20HN07L120 ......................... H14
M1200D025Z02A25HN07L200 ......................... H14
M1200D025Z02B20HN07 ................................. H13
M1200D025Z02M16HN07 ................................ H12
M1200D025Z03A20HN07L120 ......................... H14
Catalogue No. Page(s) Catalogue No. Page(s) Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 103 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRAND O b 28 2015 3 09 PM
Z104 widia.com
Index by Catalogue Number
Index
Catalogue No. Page(s)
M1200D025Z03A25HN07L200 ......................... H14
M1200D025Z03B20HN07 ................................. H13
M1200D025Z03M16HN07 ................................ H12
M1200D032Z03A25HN07L130 ......................... H14
M1200D032Z03B25HN07 ................................. H13
M1200D032Z03M16HN07 ................................ H12
M1200D032Z04A25HN07L130 ......................... H14
M1200D032Z04B25HN07 ................................. H13
M1200D032Z04M16HN07 ................................ H12
M1200D040Z03B25HN09 ................................. H30
M1200D040Z03HN09 ....................................... H31
M1200D040Z04B25HN09 ................................. H30
M1200D040Z04HN07 ....................................... H15
M1200D040Z04HN09 ................................. H31–32
M1200D040Z04M16HN07 ................................ H12
M1200D040Z05HN07 ....................................... H15
M1200D040Z05M16HN07 ................................ H12
M1200D050Z04HN07 ....................................... H15
M1200D050Z04HN09 ....................................... H31
M1200D050Z05HN07 ....................................... H15
M1200D050Z05HN09 ................................. H31–32
M1200D050Z06HN07 ....................................... H15
M1200D063Z04HN07 ....................................... H15
M1200D063Z04HN09 ....................................... H31
M1200D063Z06HN07 ....................................... H15
M1200D063Z06HN09 ....................................... H31
M1200D063Z07HN09 ................................. H31–32
M1200D063Z08HN07 ....................................... H15
M1200D080Z05HN07 ....................................... H15
M1200D080Z05HN09 ....................................... H31
M1200D080Z06HN09 ....................................... H31
M1200D080Z08HN07 ....................................... H15
M1200D080Z09HN09 ................................. H31–32
M1200D080Z10HN07 ....................................... H15
M1200D100Z06HN07 ....................................... H15
M1200D100Z06HN09 ....................................... H31
M1200D100Z08HN09 ....................................... H31
M1200D100Z09HN07 ....................................... H15
M1200D100Z11HN09 ................................. H31–32
M1200D100Z12HN07 ....................................... H15
M1200D125Z08HN07 ....................................... H15
M1200D125Z08HN09 ....................................... H31
M1200D125Z10HN09 ....................................... H31
M1200D125Z12HN07 ....................................... H15
M1200D125Z14HN09 ................................. H31–32
M1200D125Z16HN07 ....................................... H15
M1200D160Z12HN09 ....................................... H31
M1200D160Z16HN09 ................................. H31–32
M1200D200Z16HN09 ................................. H31–32
M1200D250Z20HN09 ................................. H31–32
M1200D315Z24HN09 ................................. H31–32
M1200HD040Z04HN07 ..................................... H20
M1200HD040Z05HN07 ..................................... H20
M1200HD050Z04HN07 ..................................... H20
M1200HD050Z04HN09 ..................................... H38
M1200HD050Z05HN07 ..................................... H20
M1200HD050Z05HN09 ..................................... H38
M1200HD063Z04HN07 ..................................... H20
M1200HD063Z04HN09 ..................................... H38
M1200HD063Z06HN07 ..................................... H20
M1200HD063Z06HN09 ..................................... H38
M1200HD080Z05HN07 ..................................... H20
M1200HD080Z05HN09 ..................................... H38
M1200HD080Z08HN07 ..................................... H20
M1200HD080Z08HN09 ..................................... H38
M1200HD100Z06HN07 ..................................... H20
M1200HD100Z06HN09 ..................................... H38
M1200HD100Z08HN09 ..................................... H38
M1200HD100Z09HN07 ..................................... H20
M1200HD125Z08HN07 ..................................... H20
M1200HD125Z08HN09 ..................................... H38
M1200HD125Z10HN09 ..................................... H38
M1200HD125Z12HN07 ..................................... H20
M1200HD160Z09HN09 ..................................... H38
M1200HD160Z12HN09 ..................................... H38
M1200HF025Z02A20HN07L120 ......................... H6
M1200HF025Z02M16HN07 ................................ H5
M1200HF025Z03A20HN07L120 ......................... H6
M1200HF025Z03M16HN07 ................................ H5
M1200HF032Z03A25HN07L130 ......................... H6
M1200HF032Z03M16HN07 ................................ H5
M1200HF032Z04A25HN07L130 ......................... H6
M1200HF032Z04M16HN07 ................................ H5
M1200HF040Z04M16HN07 ................................ H5
M1200HF040Z05HN07 ....................................... H7
M1200HF040Z05M16HN07 ................................ H5
M1200HF050Z04HN09 ..................................... H26
M1200HF050Z05HN07 ....................................... H7
M1200HF063Z05HN09 ..................................... H26
M1200HF063Z06HN07 ....................................... H7
M1200HF080Z06HN09 ..................................... H26
M1200HF080Z08HN07 ....................................... H7
M1200HF100Z08HN09 ..................................... H26
M1200HF125Z09HN09 ..................................... H26
M1200HF160Z12HN09 ..................................... H26
M170D012Z02A12RD07TL100 .........................M43
M170D012Z02A16RD07TL120 .........................M43
M170D012Z02A16RD07TL140 .........................M43
M170D012Z02M06RD07T ................................M42
M170D012Z02M08RD07T ................................M42
M170D015Z02A16RD07L110 ...........................M48
M170D015Z02A16RD07L150 ...........................M48
M170D015Z02B16RD07 ...................................M47
M170D015Z02M08RD07 ..................................M46
M170D015Z03A16RD07TL130 .........................M43
M170D015Z03M08RD07T ................................M42
M170D016Z02A16RD07L150 ...........................M48
M170D016Z03A16RD07L110 ...........................M48
M170D016Z03M08RD07 ..................................M46
M170D020Z02A20RD10L140 ...........................M54
M170D020Z02A25RD10L160 ...........................M54
M170D020Z02A25RD10L180 ...........................M54
M170D020Z02B20RD10 ...................................M53
M170D020Z02M10RD10 ..................................M52
M170D020Z03A20RD07L140 ...........................M48
M170D020Z04A20RD07L115 ...........................M48
M170D020Z04M10RD07 ..................................M46
M170D022Z02A20RD10L160 ...........................M54
M170D024Z02M12RD12 ..................................M59
M170D025Z02A25RD10L180 ...........................M54
M170D025Z02A25RD10L220 ...........................M54
M170D025Z02M12RD10 ..................................M52
M170D025Z03B25RD10 ...................................M53
M170D025Z03M12RD10 ..................................M52
M170D025Z05M12RD07 ..................................M46
M170D028Z02A25RD10L200 ...........................M54
M170D030Z04M16RD10 ..................................M52
M170D030Z05M16RD07 ..................................M46
M170D032Z02A32RD12L200 ...........................M61
M170D032Z02A32RD12L300 ...........................M61
M170D032Z02M16RD16 ..................................M66
M170D032Z03B32RD12 ...................................M60
M170D035Z02A32RD12L300 ...........................M61
M170D035Z03M16RD12 ..................................M59
M170D035Z04M16RD12 ..................................M59
M170D035Z05M16RD10 ..................................M52
M170D035Z06M16RD07 ..................................M46
M170D040Z04RD12 .........................................M62
M170D040Z05RD10 .........................................M55
M170D042Z05M16RD12 ..................................M59
M170D042Z05RD10 .........................................M55
M170D042Z06M16RD10 ..................................M52
M170D050Z04RD16 .........................................M67
M170D050Z05RD12 .........................................M62
M170D050Z06RD10 .........................................M55
M170D052Z04RD16 .........................................M67
M170D052Z05RD12 .........................................M62
M170D052Z06RD10 .........................................M55
M170D063Z05RD16 .........................................M67
M170D063Z06RD12 .........................................M62
M170D066Z05RD16 .........................................M67
M170D066Z06RD12 .........................................M62
M170D080Z06RD16 .........................................M67
M170D080Z07RD12 .........................................M62
M170D100Z07RD16 .........................................M67
M170D100Z08RD12 .........................................M62
M170D125Z08RD16 .........................................M67
M200D100Z06RN16 .........................................M36
M200D100Z07RN12 .........................................M31
M200D100Z08RN16 .........................................M36
M200D100Z09RN12 .........................................M31
M200D125Z08RN16 .........................................M36
M200D25Z03A25RN10L150 .............................M22
M200D25Z03A25RN10L200 .............................M22
M200D25Z03A32RN10L250 .............................M22
M200D25Z03B25RN10 .....................................M21
M200D25Z03M12RN10 ....................................M20
M200D28Z03A25RN10L200 .............................M22
M200D32Z02A32RN12L250 .............................M30
M200D32Z03A32RN10L200 .............................M22
M200D32Z03A32RN12L200 .............................M30
M200D32Z03B32RN12 .....................................M29
M200D32Z03M16RN12 ....................................M28
M200D32Z04A32RN10L150 .............................M22
M200D32Z04B32RN10 .....................................M21
M200D32Z04M16RN10 ....................................M20
M200D35Z03M16RN12 ....................................M28
M200D35Z05M16RN10 ....................................M20
M200D40Z04RN10 ...........................................M23
M200D40Z04RN12 ...........................................M31
M200D40Z06RN10 ...........................................M23
M200D42Z04M16RN12 ....................................M28
M200D42Z06M16RN10 ....................................M20
M200D50Z04RN12 ...........................................M31
M200D50Z04RN16 ...........................................M36
M200D50Z05RN10 ...........................................M23
M200D50Z05RN12 ...........................................M31
M200D50Z06RN10 ...........................................M23
M200D52Z04RN16 ...........................................M36
M200D52Z05RN12 ...........................................M31
M200D52Z06RN10 ...........................................M23
M200D63Z04RN16 ...........................................M36
M200D63Z05RN12 ...........................................M31
M200D63Z06RN16 ...........................................M36
M200D63Z07RN12 ...........................................M31
M200D66Z05RN16 ...........................................M36
M200D66Z07RN12 ...........................................M31
M200D80Z05RN16 ...........................................M36
M200D80Z06RN12 ...........................................M31
M200D80Z07RN16 ...........................................M36
M200D80Z08RN12 ...........................................M31
M270BD010A12L140 W ................................ M104
M270BD010A12L140C W .............................. M105
M270BD010B12L90 W .................................. M103
M270BD010M08 W ........................................ M102
M270BD012A12L145 W ................................ M104
M270BD012A12L145C W .............................. M105
M270BD012B12L95 W .................................. M103
M270BD012M08 W ........................................ M102
M270BD016A16L155 W ................................ M104
M270BD016A16L155C W .............................. M105
M270BD016B16L105 W ................................ M103
M270BD016M08 W ........................................ M102
M270BD020A20L170 W ................................ M104
M270BD020A20L170C W .............................. M105
M270BD020B20L120 W ................................ M103
M270BD020M10 W ........................................ M102
M270BD025A25L195 W ................................ M104
M270BD025B25L145 W ................................ M103
M270BD025M12 W ........................................ M102
M270BD032A32L205 W ................................ M104
M270BD032B32L155 W ................................ M103
M270BD032M16 W ........................................ M102
M270BF10 TN2505 ........................................ M108
M270BF10 TN2510 ........................................ M108
M270BF12 TN2505 ........................................ M108
M270BF12 TN2510 ........................................ M108
M270BF12 TN6525 ........................................ M108
M270BF16 TN2505 ........................................ M108
M270BF16 TN2510 ........................................ M108
M270BF16 TN6525 ........................................ M108
M270BF20 TN2505 ........................................ M108
M270BF20 TN2510 ........................................ M108
M270BF20 TN6525 ........................................ M108
M270BF25 TN2505 ........................................ M108
M270BF25 TN2510 ........................................ M108
M270BF32 TN2505 ........................................ M108
M270BF32 TN2510 ........................................ M108
M270BR10 TN2510 ........................................ M109
M270BR10 TN7525 ........................................ M109
M270BR10 TN7535 ........................................ M109
M270BR12 TN2510 ........................................ M109
M270BR12 TN6540 ........................................ M109
M270BR12 TN7525 ........................................ M109
M270BR12 TN7535 ........................................ M109
M270BR16 TN2510 ........................................ M109
M270BR16 TN6540 ........................................ M109
M270BR16 TN7525 ........................................ M109
M270BR16 TN7535 ........................................ M109
M270BR20 TN2510 ........................................ M109
M270BR20 TN6540 ........................................ M109
M270BR20 TN7525 ........................................ M109
M270BR20 TN7535 ........................................ M109
M270BR25 TN2510 ........................................ M109
M270BR25 TN7525 ........................................ M109
M270BR25 TN7535 ........................................ M109
M270BR32 TN2510 ........................................ M109
M270BR32 TN7525 ........................................ M109
M270BR32 TN7535 ........................................ M109
M270HF10 TN2505 ........................................ M127
M270HF10 TN6525 ........................................ M127
M270HF10 TN6540 ........................................ M127
M270HF12 TN2505 ........................................ M127
M270HF12 TN6525 ........................................ M127
M270HF12 TN6540 ........................................ M127
M270HF13 TN2505 ........................................ M127
M270HF13 TN6525 ........................................ M127
M270HF13 TN6540 ........................................ M127
M270HF16 TN2505 ........................................ M127
M270HF16 TN6525 ........................................ M127
M270HF16 TN6540 ........................................ M127
M270HF20 TN2505 ........................................ M127
Catalogue No. Page(s) Catalogue No. Page(s) Catalogue No. Page(s)
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 104 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRANDO b 28 20153 09PM
Z105
widia.com
Index by Catalogue Number
Catalogue No. Page(s)
M270HF20 TN6525 ........................................ M127
M270HF20 TN6540 ........................................ M127
M270TD010A10L120 .......................... M119, M125
M270TD010A10L120C ....................... M120, M126
M270TD010A10L150C ....................... M120, M126
M270TD012A12L120C ....................... M120, M126
M270TD012A12L140 .......................... M119, M125
M270TD012A12L160C ....................... M120, M126
M270TD012M08 ................................. M118, M124
M270TD016A16L140C ....................... M120, M126
M270TD016A16L160 .......................... M119, M125
M270TD016A16L180C ....................... M120, M126
M270TD016M08 ................................. M118, M124
M270TD020A20L150C ....................... M120, M126
M270TD020A20L180 .......................... M119, M125
M270TD020A20L200C ....................... M120, M126
M270TD020M10 ................................. M118, M124
M270TF10R05 TN2510 .................................. M122
M270TF10R05 TN2525 .................................. M122
M270TF10R1 TN2505 .................................... M122
M270TF10R1 TN2525 .................................... M122
M270TF12R05 TN2510 .................................. M122
M270TF12R05 TN2525 .................................. M122
M270TF12R1 TN2510 .................................... M122
M270TF12R1 TN2525 .................................... M122
M270TF12R2 TN2505 .................................... M122
M270TF12R2 TN2525 .................................... M122
M270TF16R03 TN2510 .................................. M122
M270TF16R03 TN2525 .................................. M122
M270TF16R05 TN2510 .................................. M122
M270TF16R05 TN2525 .................................. M122
M270TF16R1 TN2510 .................................... M122
M270TF16R1 TN2525 .................................... M122
M270TF16R2 TN2510 .................................... M122
M270TF16R2 TN2525 .................................... M122
M270TF16R3 TN2525 .................................... M122
M270TF20R03 TN2510 .................................. M122
M270TF20R05 TN2510 .................................. M122
M270TF20R05 TN2525 .................................. M122
M270TF20R1 TN2525 .................................... M122
M270TF20R2 TN2510 .................................... M122
M270TF20R2 TN2525 .................................... M122
M270TF20R4 TN2525 .................................... M122
M370D025Z02A25WO08L200 ............................M5
M370D025Z02A25WO08L300 ............................M5
M370D025Z02M12WO08 ...................................M4
M370D025Z03A25WO08L150 ............................M5
M370D025Z03A25WO08L200 ............................M5
M370D025Z03M12WO08 ...................................M4
M370D028Z03A25WO08L200 ............................M5
M370D032Z03A32WO08L300 ............................M5
M370D032Z04A32WO08L150 ............................M5
M370D032Z04A32WO08L200 ............................M5
M370D032Z04M16WO08 ...................................M4
M370D040Z04WO08 ..........................................M6
M370D040Z05WO08 ..........................................M6
M370D042Z05M16WO08 ...................................M4
M370D050Z05WO08 ..........................................M6
M370D050Z06WO08 ..........................................M6
M370D052Z05WO08 ..........................................M6
M370D052Z06WO08 ..........................................M6
M370D063Z06WO08 ..........................................M6
M370D066Z06WO08 ..........................................M6
M370D080Z07WO08 ..........................................M6
M370D100Z06WO12 ........................................M12
M370D100Z07WO12 ........................................M12
M370D125Z07WO12 ........................................M12
M370D125Z09WO12 ........................................M12
M370D42Z03M16WO12 ...................................M11
M370D50Z04WO12 ..........................................M12
M370D52Z04WO12 ..........................................M12
M370D63Z04WO12 ..........................................M12
M370D63Z05WO12 ..........................................M12
M370D66Z05WO12 ..........................................M12
M370D80Z05WO12 ..........................................M12
M370D80Z06WO12 ..........................................M12
M4000CA-AD1505 ............................................ H73
M4000CA-AP1003 ............................................ H73
M4000CA-AP1604 ............................................ H73
M4000CA-HN07 ................................................ H73
M4000CA-HN07HD ........................................... H73
M4000CA-HN07HF ............................................ H73
M4000CA-HN09 ................................................ H73
M4000CA-HN09HD ........................................... H73
M4000CA-HN09HF ............................................ H73
M4000CA-HP06 ................................................ H73
M4000CA-MDHX10 ........................................... H73
M4000CA-RC1606 ............................................ H73
M4000CA-SD1204 ............................................ H73
M4000CA-SD1506 ............................................ H73
M4000CA-SE1203 ............................................ H73
M4000CA-SE1204 ............................................ H73
M4000CA-SE1504 ............................................ H73
M4000CA-SN12 ................................................ H73
M4000CA-SN15 ................................................ H73
M4000CA-SP12 ................................................ H73
M4000CA-SP1203 ............................................ H73
M4000CA-SP1504 ............................................ H73
M4000CA-TP1603 ............................................ H73
M4000CA-TP2204 ............................................ H73
M4000CA-XP16 ................................................ H73
M4000D125Z06ADJ ......................................... H72
M4000D125Z08ADJ ......................................... H72
M4000D160Z08ADJ ......................................... H72
M4000D160Z12ADJ ......................................... H72
M4000D200Z10ADJ ......................................... H72
M4000D200Z14ADJ ......................................... H72
M4000D250Z12ADJ ......................................... H72
M4000D250Z18ADJ ......................................... H72
M4000D315Z16ADJ ......................................... H72
M4000D315Z22ADJ ......................................... H72
M40222 .............................................................. R6
M40223 .............................................................. R6
M40224 .............................................................. R6
M40227 .............................................................. R6
M40228 .............................................................. R6
M40229 .............................................................. R6
M40230 .............................................................. R6
M40232 .............................................................. R6
M40233 .............................................................. R6
M40237 .............................................................. R6
M40239 .............................................................. R6
M40242 .............................................................. R6
M40263 .............................................................. R7
M40267 .............................................................. R7
M40268 .............................................................. R7
M40271 .............................................................. R7
M40272 .............................................................. R7
M40274 .............................................................. R7
M40282 .............................................................. R7
M40303 .............................................................. R8
M40304 .............................................................. R8
M40309 .............................................................. R8
M40310 .............................................................. R8
M40316 .............................................................. R8
M40342 .............................................................. R9
M40343 .............................................................. R9
M40344 .............................................................. R9
M40346 .............................................................. R9
M40347 .............................................................. R9
M40349 .............................................................. R9
M40352 .............................................................. R9
M40353 .............................................................. R9
M40354 .............................................................. R9
M40368 ............................................................ R10
M40370 ............................................................ R10
M40373 ............................................................ R10
M40396 ............................................................ R11
M40398 ............................................................ R11
M40399 ............................................................ R11
M40400 ............................................................ R11
M40403 ............................................................ R11
M40406 ............................................................ R11
M40428 ............................................................ R12
M40430 ............................................................ R12
M40431 ............................................................ R12
M40434 ............................................................ R12
M40436 ............................................................ R12
M40452 ............................................................ R13
M40454 ............................................................ R13
M40455 ............................................................ R13
M40474 ............................................................ R14
M40475 ............................................................ R14
M40477 ............................................................ R14
M40478 ............................................................ R14
M40479 ............................................................ R14
M40496 ............................................................ R15
M40497 ............................................................ R15
M40498 ............................................................ R15
M40503 ............................................................ R15
M40516 ............................................................ R16
M40521 ............................................................ R16
M40551 .............................................................. R6
M40552 .............................................................. R6
M40553 .............................................................. R6
M40555 .............................................................. R6
M40559 .............................................................. R8
M40560 .............................................................. R8
M40561 .............................................................. R8
M40567 .............................................................. R9
M40568 .............................................................. R9
M40572 .............................................................. R9
M40574 ............................................................ R10
M40576 ............................................................ R11
M40578 ............................................................ R11
M40582 ............................................................ R14
M40584 ............................................................ R14
M40585 ............................................................ R14
M40589 ............................................................ R18
M40590 ............................................................ R18
M40592 ............................................................ R18
M40595 ............................................................ R18
M40596 ............................................................ R18
M40597 ............................................................ R18
M40598 ............................................................ R18
M41222 .............................................................. R6
M41223 .............................................................. R6
M41224 .............................................................. R6
M41225 .............................................................. R6
M41226 .............................................................. R6
M41227 .............................................................. R6
M41228 .............................................................. R6
M41229 .............................................................. R6
M41231 .............................................................. R6
M41232 .............................................................. R6
M41233 .............................................................. R6
M41235 .............................................................. R6
M41237 .............................................................. R6
M41239 .............................................................. R6
M41241 .............................................................. R6
M41245 .............................................................. R6
M41261 .............................................................. R7
M41262 .............................................................. R7
M41263 .............................................................. R7
M41265 .............................................................. R7
M41266 .............................................................. R7
M41268 .............................................................. R7
M41269 .............................................................. R7
M41270 .............................................................. R7
M41271 .............................................................. R7
M41272 .............................................................. R7
M41274 .............................................................. R7
M41275 .............................................................. R7
M41276 .............................................................. R7
M41277 .............................................................. R7
M41303 .............................................................. R8
M41304 .............................................................. R8
M41306 .............................................................. R8
M41307 .............................................................. R8
M41308 .............................................................. R8
M41309 .............................................................. R8
M41310 .............................................................. R8
M41311 .............................................................. R8
M41312 .............................................................. R8
M41314 .............................................................. R8
M41316 .............................................................. R8
M41317 .............................................................. R8
M41318 .............................................................. R8
M41319 .............................................................. R8
M41320 .............................................................. R8
M41343 .............................................................. R9
M41344 .............................................................. R9
M41345 .............................................................. R9
M41346 .............................................................. R9
M41347 .............................................................. R9
M41348 .............................................................. R9
M41349 .............................................................. R9
M41350 .............................................................. R9
M41351 .............................................................. R9
M41352 .............................................................. R9
M41354 .............................................................. R9
M41356 .............................................................. R9
M41368 ............................................................ R10
M41369 ............................................................ R10
M41370 ............................................................ R10
M41371 ............................................................ R10
M41372 ............................................................ R10
M41373 ............................................................ R10
M41374 ............................................................ R10
M41375 ............................................................ R10
M41377 ............................................................ R10
M41395 ............................................................ R11
M41396 ............................................................ R11
M41397 ............................................................ R11
M41398 ............................................................ R11
M41399 ............................................................ R11
M41400 ............................................................ R11
M41401 ............................................................ R11
M41402 ............................................................ R11
M41403 ............................................................ R11
M41405 ............................................................ R11
M41406 ............................................................ R11
Catalogue No. Page(s) Catalogue No. Page(s) Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 105 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRAND O b 28 2015 3 09 PM
Z106 widia.com
Index by Catalogue Number
Index
Catalogue No. Page(s)
M41428 ............................................................ R12
M41431 ............................................................ R12
M41432 ............................................................ R12
M41433 ............................................................ R12
M41434 ............................................................ R12
M41435 ............................................................ R12
M41436 ............................................................ R12
M41439 ............................................................ R12
M41442 ............................................................ R12
M41452 ............................................................ R13
M41453 ............................................................ R13
M41454 ............................................................ R13
M41455 ............................................................ R13
M41457 ............................................................ R13
M41473 ............................................................ R14
M41474 ............................................................ R14
M41476 ............................................................ R14
M41477 ............................................................ R14
M41478 ............................................................ R14
M41479 ............................................................ R14
M41480 ............................................................ R14
M41496 ............................................................ R15
M41497 ............................................................ R15
M41498 ............................................................ R15
M41501 ............................................................ R15
M41502 ............................................................ R15
M41503 ............................................................ R15
M41504 ............................................................ R15
M41505 ............................................................ R15
M41516 ............................................................ R16
M41518 ............................................................ R16
M41519 ............................................................ R16
M41525 ............................................................ R16
M42006 ............................................................ R17
M42007 ............................................................ R17
M42008 ............................................................ R17
M42009 ............................................................ R17
M42010 ............................................................ R17
M42012 ............................................................ R17
M42013 ............................................................ R17
M42014 ............................................................ R17
M42015 ............................................................ R17
M42016 ............................................................ R17
M42018 ............................................................ R17
M42019 ............................................................ R17
M42020 ............................................................ R17
M42021 ............................................................ R17
M42022 ............................................................ R17
M42023 ............................................................ R17
M42024 ............................................................ R17
M42025 ............................................................ R17
M42026 ............................................................ R17
M42027 ............................................................ R17
M42028 ............................................................ R17
M42029 ............................................................ R17
M42030 ............................................................ R17
M42031 ............................................................ R17
M42032 ............................................................ R17
M42033 ............................................................ R17
M42034 ............................................................ R17
M42035 ............................................................ R17
M42036 ............................................................ R17
M42037 ............................................................ R17
M42038 ............................................................ R17
M42039 ............................................................ R17
MASCFCR09CA06F WG .................................... W46
MASCLCR09CA06F WG .................................... W47
MASTFCR09CA11F WG .................................... W48
MB010062L CG5 ............................................... D80
MB010062L CM1 .............................................. D80
MB010062R CG5 .............................................. D79
MB010062R CM1 .............................................. D79
MB030187L CG5 ............................................... D80
MB030187L CM1 .............................................. D80
MB062187L CG5 ............................................... D80
MB062187L CM1 .............................................. D80
MB062187R CG5 .............................................. D79
MB062187R CM1 .............................................. D79
MB062312L CG5 ............................................... D80
MB062312L CM1 .............................................. D80
MB062312R CG5 .............................................. D79
MB062312R CM1 .............................................. D79
MB094281L CM1 .............................................. D80
MB094281R CM1 .............................................. D79
MB094500L CG5 ............................................... D80
MB094500L CM1 .............................................. D80
MB094500R CG5 .............................................. D79
MB094500R CM1 .............................................. D79
MB125375L CG5 ............................................... D80
MB125375L CM1 .............................................. D80
MB125625L CG5 ............................................... D80
MB125625L CM1 .............................................. D80
MB125625R CM1 .............................................. D79
MB156500L CG5 ............................................... D80
MB156500L CM1 .............................................. D80
MB156500R CG5 .............................................. D79
MB156500R CM1 .............................................. D79
MB156875L CG5 ............................................... D80
MB156875L CM1 .............................................. D80
MB156875R CM1 .............................................. D79
MBIT WG ...........................................D59, D71, D84
MCFNL12CA12 WG ........................................... C92
MCFNL16CA12 WG ........................................... C92
MCFNR10CA09 WG ........................................... C92
MCFNR12CA12 WG ........................................... C92
MCFNR16CA12 WG ........................................... C92
MCFNR20CA12 WG ........................................... C92
MCKNL12CA12 WG ........................................... C93
MCKNR12CA12 WG ........................................... C93
MCKNR16CA12 WG ........................................... C93
MCLNL12CA12 WG ........................................... C94
MCLNL16CA12 WG ........................................... C94
MCLNL20CA12 WG ........................................... C94
MCLNL25CA19 WG ........................................... C94
MCLNR12CA12 WG ........................................... C94
MCLNR16CA12 WG ........................................... C94
MCLNR20CA12 WG ........................................... C94
MCLNR25CA19 WG ........................................... C94
MDHW120408 THM............................................L29
MDHW120408 WK15CM ....................................L29
MDHW120408 WP25PM ....................................L29
MDHW120408 WP35CM ....................................L29
MDHW120408 WP40PM ....................................L29
MDHW120408 WU35PM ....................................L29
MDHX09T308 THM .............................................L26
MDHX09T308 WK15CM .....................................L26
MDHX09T308 WP25PM ......................................L26
MDHX09T308 WP35CM .....................................L26
MDHX09T308 WP40PM ......................................L26
MDHX09T308 WU35PM .....................................L26
MDJNL16CA15 WG ........................................... C95
MDJNR16CA15 WG ........................................... C95
MDJNR20CA15 WG ........................................... C95
MDQNL16CA15 WG ........................................... C96
MDQNL20CA15 WG ........................................... C96
MDQNR16CA15 WG .......................................... C96
MDQNR20CA15 WG .......................................... C96
MG095030L CG5 ..............................................D81
MG095030L CM1 .............................................. D81
MG095030R CM1 .............................................D81
MG125040L CG5 ..............................................D81
MG125040L CM1 .............................................. D81
MG125040R CG5 .............................................. D81
MG156050L CG5 ..............................................D81
MG156050L CM1 .............................................. D81
MG156050R CM1 .............................................D81
MKEY WG ..........................................D59, D71, D84
MP062187L CM1 .............................................. D82
MP062187R CG5 .............................................. D82
MP094281L CG5 ............................................... D82
MP094281L CM1 .............................................. D82
MP094281R CG5 .............................................. D82
MP094281R CM1 .............................................. D82
MP125375L CM1 .............................................. D82
MP125375R CG5 .............................................. D82
MP125375R CM1 .............................................. D82
MP156500L CG5 ............................................... D82
MP156500L CM1 .............................................. D82
MP156500R CG5 .............................................. D82
MP156500R CM1 .............................................. D82
MS-2071 ..................................................... J32–35
MS1034 .....................................................E79, F32
MS1071 ...........................................................E125
MS1072 ...........................................................E127
MS1073 ...........................................................E125
MS110 .............................................................. C65
MS111 ..............................................C36–39, C108
MS1152 ...................C126–129, V10, V13, V16, V19
MS1153 ................C42–45, C48, C66–67, C69–73,
C75–76, C78–81, C110–111,
C113–119, C126–129
MS1154 ..................................................C45, C119
MS1155 ........C42, C44, C66–67, C69–73, C75–76,
C78–81, C110, C112–113,
C119–121, C123–129
MS1156 ......................................................C42–49
MS1157 ................... C67, C112, C120, C122, C124
MS1158 ......................................C42–47, C67, C73
MS1160 .............................C45, V10, V13, V16, V19
MS1162 .............................................................E36
MS1200 .........................E74–76, E78, F24–27, F31
MS1234 ....................................................J24, M23
MS1234CG ...........................J8, J24, J35, M6, M12,
M23, M85, M91, M96
MS1242 ..........................................M23, M31, M36
MS1242CG ......................................M23, M31, M36
MS125 ............................................C37, C39, C109
MS1254 ...................................................M62, M67
MS1254CG ...............................................M62, M67
MS1294 ...........E126–127, H72, J8, J24, M23, M31
MS1294 W ...............................................M55, M62
MS1294CG ...........................J8, J24, J35, M6, M23,
M31, M55, M62
MS1321 ......................................................C40–41
MS1336 ............................................................M31
MS1488 ........................................ F28–29, F34–35
MS1489 ...............................................F28–29, F34
MS1495 .................................................. E124–125
MS1933 ...............C78–79, C110, C113, C115–116
MS1939 ..............................................C67, C69–70
MS1982 .....................................V10, V13, V16, V19
MS2002 .............................................................E36
MS2038 .................. J24, M6, M31, M36, M62, M67
MS2038CG .........J8, J24, J35, M6, M12, M31, M36,
M62, M67, M85, M91, M96
MS2072CG .............................M31, M55, M62, M67
MS2085 ..................................................... M11–12
MS2111 .........................E74–76, E78, F24–27, F31
MS2173 ............................. C110, C113, C115–116
MS2175 .............................. C110–111, C113–117,
C119, C126–129
MS2187C ............................J8, J24, J35, M12, M36
MS2189C ...........................................................J35
MS2195C .......................... J8, J24, M12, M31, M36
MS2219 ......................................................... M4–6
MS2260 ............................................C68, J48, M36
MS318 .............................................................E122
MS326 ................................................ E30–31, E34
MS352 ............................. E74, E76, E127, F25, F27
MS364 ................................... C94, C97, C101–102
MS412 .............................................................E122
MS518 .............................................................E128
MS959 .............................................................. C36
MS960 ........................................................C37–39
MSKNL10CA09 WG ........................................... C97
MSKNL16CA12 WG ........................................... C97
MSKNL20CA15 WG ........................................... C97
MSKNR10CA09 WG ........................................... C97
MSKNR12CA12 WG ........................................... C97
MSKNR16CA12 WG ........................................... C97
MSKNR20CA15 WG ........................................... C97
MSKNR25CA19 WG ........................................... C97
MSM46 WG .............................. D59, D71, D74, D84
MSRNL12CA12 WG ........................................... C98
MSRNL16CA12 WG ........................................... C98
MSRNL20CA15 WG ........................................... C98
MSRNR10CA09 WG ........................................... C98
MSRNR12CA12 WG ........................................... C98
MSRNR20CA15 WG ........................................... C98
MSSNL10CA09 WG ........................................... C99
MSSNL12CA12 WG ........................................... C99
MSSNL16CA12 WG ........................................... C99
MSSNR10CA09 WG ........................................... C99
MSSNR12CA12 WG ........................................... C99
MSSNR16CA12 WG ........................................... C99
MSSNR20CA15 WG ........................................... C99
MSTNR10CA09 WG ......................................... C100
MSTNR12CA12 WG ......................................... C100
MSTNR16CA12 WG ......................................... C100
MSYNL10CA09 WG.......................................... C101
MSYNR10CA09 WG ......................................... C101
MSYNR12CA12 WG ......................................... C101
MSYNR16CA12 WG ......................................... C101
MSYNR25CA19 WG ......................................... C101
MT09560F2L CG5 ............................................. D83
MT09560F2L CM1 ............................................ D83
MT09560F2R CM1 ............................................ D83
MT12560F2L CG5 ............................................. D83
MT12560F2L CM1 ............................................ D83
MT12560F2R CG5 ............................................. D83
MT12560F2R CM1 ............................................ D83
MT15660F2L CG5 ............................................. D83
MT15660F2L CM1 ............................................ D83
MT15660F2R CM1 ............................................ D83
MTFNL12CA16 WG .......................................... C102
MTFNL16CA16 WG .......................................... C102
MTFNR12CA16 WG ......................................... C102
MTFNR16CA16 WG ......................................... C102
MTFNR20CA22 WG ......................................... C102
MTFNR25CA27 WG ......................................... C102
MTGNL12CA16 WG .........................................C103
Catalogue No. Page(s) Catalogue No. Page(s) Catalogue No. Page(s)
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 106 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRANDO b 28 20153 09PM
Z107
widia.com
Index by Catalogue Number
Catalogue No. Page(s)
MTGNL16CA16 WG .........................................C103
MTGNL20CA22 WG .........................................C103
MTGNR12CA16 WG ......................................... C103
MTGNR16CA16 WG ......................................... C103
MTGNR20CA22 WG ......................................... C103
MTMM1040 WG ................................................ D74
MTMM12100 WG .............................................. D74
MTMM1240 WG ................................................ D74
MTMM22127 WG .............................................. D74
MTMM840 WG .................................................. D74
NA3L4 TN6025 ...................................................F21
NA3L6 TN6025 ...................................................F21
NA3L8 TN6025 ...................................................F21
NA3R4 TN6025 ..................................................F21
NA3R6 TN6025 ..................................................F21
NA3R8 TN6025 ..................................................F21
NA4L4 TN6025 ...................................................F21
NA4R4 TN6025 ..................................................F21
NA6L2 TN6025 ...................................................F21
NA6L3 TN6025 ...................................................F21
NA6R2 TN6025 ..................................................F21
NA6R3 TN6025 ..................................................F21
NAS3L12 TN6025 ...............................................F22
NAS3L6 TN6025 .................................................F22
NAS3L8 TN6025 .................................................F22
NAS3R8 TN6025 ................................................F22
NASL1010M2Q W.......................................E75, F26
NASL1212M2Q W.......................................E75, F26
NASL1616K3Q W .......................................E75, F26
NASR1010M2Q W ......................................E75, F26
NASR1212M2Q W ......................................E75, F26
NASR1616K3Q W .......................................E75, F26
NB2L THM ..........................................................E72
NB2R THM ..........................................................E72
NB3L THM ..........................................................E72
NB3R THM ..........................................................E72
NDC310RDL75 TN6025 ......................................F20
NDC3115VR75 TN6010 ......................................F18
NDC38RDL75 TN6025 ........................................F20
NDC38RDR75 TN6025 .......................................F20
NDC8115VR75M TN6010 ...................................F19
NDC88VR75M TN6010 .......................................F19
NEL1616H2 W ............................................E76, F27
NEL2020K2 W ............................................E76, F27
NEL2525M2 W ...........................................E76, F27
NEL2525M3 W ...........................................E76, F27
NEL2525M4 W ...........................................E76, F27
NEL3225P3 W ............................................E76, F27
NEL3225P4 W ............................................E76, F27
NEL3232P4 W ............................................E76, F27
NEL3232P5 W ............................................E76, F27
NER1616H2 W ............................................E76, F27
NER2020K2 W ............................................E76, F27
NER2525M2 W ...........................................E76, F27
NER2525M3 W ...........................................E76, F27
NER2525M4 W ...........................................E76, F27
NER3225P3 W ............................................E76, F27
NER3225P4 W ............................................E76, F27
NER3232P4 W ............................................E76, F27
NER3232P5 W ............................................E76, F27
NF3125LK TN6025 .............................................E65
NF3125RK TN6025 .............................................E65
NF3156LK TN6025 .............................................E65
NF3M200LK TN6025 ..........................................E65
NF3M200RK TN6025 ..........................................E65
NF3M300LK TN6025 ..........................................E65
NF3M300RK TN6025 ..........................................E65
NFD3125LK TN6025 ...........................................E66
NFD3125RK TN6025 ..........................................E66
NFD3M300LK TN6025 ........................................E66
NFD3M300RK TN6025 .......................................E66
NFD4189LK TN6025 ...........................................E66
NFD4189RK TN6025 ..........................................E66
NFD4250RK TN6025 ..........................................E66
NG1047L TN6025...............................................E52
NG1062L TN6025...............................................E52
NG1094L TN6025...............................................E52
NG2031L TN6025...............................................E51
NG2031LK TN6010 ............................................E56
NG2031LK TN6025 ............................................E56
NG2031R THM....................................................E51
NG2031R TN6010 ..............................................E51
NG2031R TN6025 ..............................................E51
NG2031RK TN6010 ............................................E53
NG2031RK TN6025 ............................................E53
NG2041R TN6025 ..............................................E51
NG2047LK TN6025 ............................................E56
NG2047RK TN6010 ............................................E53
NG2047RK TN6025 ............................................E53
NG2058L TN6025...............................................E51
NG2058R TN6025 ..............................................E51
NG2062L TN6025...............................................E51
NG2062LK TN6010 ............................................E57
NG2062LK TN6025 ............................................E57
NG2062R THM....................................................E51
NG2062R TN6010 ..............................................E51
NG2062R TN6025 ..............................................E51
NG2062RK TN6010 ............................................E53
NG2062RK TN6025 ............................................E53
NG2094LK TN6010 ............................................E58
NG2094LK TN6025 ............................................E58
NG2094RK TN6010 ............................................E54
NG2094RK TN6025 ............................................E54
NG2125LK TN6010 ............................................E58
NG2125LK TN6025 ............................................E58
NG2125RK TN6010 ............................................E55
NG2125RK TN6025 ............................................E55
NG2M050LK TN6010 .........................................E56
NG2M050LK TN6025 .........................................E56
NG2M050RK TN6010 .........................................E53
NG2M050RK TN6025 .........................................E53
NG2M080LK TN6010 .........................................E56
NG2M080LK TN6025 .........................................E56
NG2M080RK TN6010 .........................................E53
NG2M080RK TN6025 .........................................E53
NG2M100LK TN6010 .........................................E56
NG2M100LK TN6025 .........................................E56
NG2M100RK TN6010 .........................................E53
NG2M100RK TN6025 .........................................E53
NG2M120LK TN6010 .........................................E57
NG2M120LK TN6025 .........................................E57
NG2M120RK TN6010 .........................................E53
NG2M120RK TN6025 .........................................E53
NG2M140LK TN6010 .........................................E57
NG2M140LK TN6025 .........................................E57
NG2M140RK TN6010 .........................................E53
NG2M140RK TN6025 .........................................E53
NG2M150LK TN6025 .........................................E57
NG2M150RK TN6025 .........................................E53
NG2M170LK TN6010 .........................................E57
NG2M170LK TN6025 .........................................E57
NG2M170RK TN6010 .........................................E53
NG2M170RK TN6025 .........................................E53
NG2M175LK TN6025 .........................................E57
NG2M175RK TN6025 .........................................E54
NG2M195LK TN6010 .........................................E57
NG2M195LK TN6025 .........................................E57
NG2M195RK TN6010 .........................................E54
NG2M195RK TN6025 .........................................E54
NG2M200LK TN6010 .........................................E57
NG2M200LK TN6025 .........................................E57
NG2M200RK TN6010 .........................................E54
NG2M200RK TN6025 .........................................E54
NG2M220LK TN6025 .........................................E57
NG2M220RK TN6025 .........................................E54
NG2M225LK TN6010 .........................................E58
NG2M225LK TN6025 .........................................E58
NG2M225RK TN6010 .........................................E54
NG2M225RK TN6025 .........................................E54
NG2M250LK TN6025 .........................................E58
NG2M250RK TN6025 .........................................E54
NG2M275LK TN6010 .........................................E58
NG2M275LK TN6025 .........................................E58
NG2M275RK TN6010 .........................................E54
NG2M275RK TN6025 .........................................E54
NG2M300LK TN6010 .........................................E58
NG2M300LK TN6025 .........................................E58
NG2M300RK TN6010 .........................................E55
NG2M300RK TN6025 .........................................E55
NG2M325LK TN6025 .........................................E59
NG2M325RK TN6025 .........................................E55
NG3047L THM ....................................................E51
NG3047L TN6010...............................................E51
NG3047L TN6025...............................................E51
NG3047LK TN6010 ............................................E56
NG3047LK TN6025 ............................................E56
NG3047R TN6010 ..............................................E51
NG3047R TN6025 ..............................................E51
NG3047RK TN6010 ............................................E53
NG3047RK TN6025 ............................................E53
NG3062L TN6010...............................................E51
NG3062L TN6025...............................................E51
NG3062LK TN6010 ............................................E57
NG3062LK TN6025 ............................................E57
NG3062LK TN7110 ............................................E57
NG3062R THM....................................................E51
NG3062R TN6010 ..............................................E51
NG3062R TN6025 ..............................................E51
NG3062RK TN6010 ............................................E53
NG3062RK TN6025 ............................................E53
NG3062RK TN7110 ............................................E53
NG3072LK TN6010 ............................................E57
NG3072LK TN6025 ............................................E57
NG3072RK TN6010 ............................................E54
NG3072RK TN6025 ............................................E54
NG3078LK TN6010 ............................................E57
NG3078LK TN6025 ............................................E57
NG3078RK TN6010 ............................................E54
NG3078RK TN6025 ............................................E54
NG3094L TN6010...............................................E52
NG3094L TN6025...............................................E52
NG3094LK TN6010 ............................................E58
NG3094LK TN6025 ............................................E58
NG3094R THM....................................................E51
NG3094R TN6010 ..............................................E51
NG3094R TN6025 ..............................................E51
NG3094RK TN6010 ............................................E54
NG3094RK TN6025 ............................................E54
NG3125L THM ....................................................E52
NG3125L TN6010...............................................E52
NG3125L TN6025...............................................E52
NG3125LK TN6010 ............................................E58
NG3125LK TN6025 ............................................E58
NG3125R THM....................................................E51
NG3125R TN6010 ..............................................E51
NG3125R TN6025 ..............................................E51
NG3125RK TN6010 ............................................E55
NG3125RK TN6025 ............................................E55
NG3156LK TN6010 ............................................E59
NG3156LK TN6025 ............................................E59
NG3156RK TN6010 ............................................E55
NG3156RK TN6025 ............................................E55
NG3189LK TN6010 ............................................E59
NG3189LK TN6025 ............................................E59
NG3189LK TN7110 ............................................E59
NG3189RK TN6010 ............................................E56
NG3189RK TN6025 ............................................E56
NG3189RK TN7110 ............................................E56
NG3M100LK TN6025 .........................................E56
NG3M100RK TN6025 .........................................E53
NG3M120LK TN6010 .........................................E57
NG3M120LK TN6025 .........................................E57
NG3M120RK TN6010 .........................................E53
NG3M120RK TN6025 .........................................E53
NG3M150LK TN6025 .........................................E57
NG3M150LK TN7110 .........................................E57
NG3M150RK TN6025 .........................................E53
NG3M150RK TN7110 .........................................E53
NG3M175LK TN6025 .........................................E57
NG3M175RK TN6025 .........................................E54
NG3M200LK TN6025 .........................................E57
NG3M200LK TN7110 .........................................E57
NG3M200RK TN6025 .........................................E54
NG3M200RK TN7110 .........................................E54
NG3M220LK TN6025 .........................................E58
NG3M220RK TN6025 .........................................E54
NG3M225LK TN6010 .........................................E58
NG3M225LK TN6025 .........................................E58
NG3M225RK TN6010 .........................................E54
NG3M225RK TN6025 .........................................E54
NG3M250LK TN6025 .........................................E58
NG3M250RK TN6025 .........................................E54
NG3M250RK TN7110 .........................................E54
NG3M275LK TN6010 .........................................E58
NG3M275LK TN6025 .........................................E58
NG3M275RK TN6010 .........................................E55
NG3M275RK TN6025 .........................................E55
NG3M300LK TN6010 .........................................E58
NG3M300LK TN6025 .........................................E58
NG3M300RK TN6010 .........................................E55
NG3M300RK TN6025 .........................................E55
NG3M300RK TN7110 .........................................E55
NG3M320LK TN6025 .........................................E58
NG3M320RK TN6025 .........................................E55
NG3M325LK TN6025 .........................................E59
NG3M325RK TN6025 .........................................E55
NG3M350LK TN6025 .........................................E59
NG3M350RK TN6025 .........................................E55
NG3M400LK TN6010 .........................................E59
NG3M400LK TN6025 .........................................E59
NG3M400LK TN7110 .........................................E59
NG3M400RK TN6010 .........................................E55
NG3M400RK TN6025 .........................................E55
NG3M425LK TN6010 .........................................E59
NG3M425LK TN6025 .........................................E59
NG3M425RK TN6010 .........................................E55
NG3M425RK TN6025 .........................................E55
NG3M450LK TN6025 .........................................E59
NG3M450RK TN6025 .........................................E56
NG4125LK TN6010 ............................................E58
NG4125LK TN6025 ............................................E58
NG4125RK TN6010 ............................................E55
Catalogue No. Page(s) Catalogue No. Page(s) Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 107 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRAND O b 28 2015 3 09 PM
Z108 widia.com
Index by Catalogue Number
Index
Catalogue No. Page(s)
NG4125RK TN6025 ............................................E55
NG4189LK TN6010 ............................................E59
NG4189LK TN6025 ............................................E59
NG4189RK TN6010 ............................................E56
NG4189RK TN6025 ............................................E56
NG4250L TN6010...............................................E52
NG4250L TN6025...............................................E52
NG4250LK TN6010 ............................................E59
NG4250LK TN6025 ............................................E59
NG4250R TN6010 ..............................................E51
NG4250R TN6025 ..............................................E51
NG4250RK TN6010 ............................................E56
NG4250RK TN6025 ............................................E56
NG4M300LK TN6025 .........................................E58
NG4M300RK TN6025 .........................................E55
NG4M350LK TN6025 .........................................E59
NG4M350LK TN7110 .........................................E59
NG4M350RK TN6025 .........................................E55
NG4M400LK TN6010 .........................................E59
NG4M400LK TN6025 .........................................E59
NG4M400RK TN6010 .........................................E55
NG4M400RK TN6025 .........................................E55
NG4M450LK TN6025 .........................................E59
NG4M450RK TN6025 .........................................E56
NG4M500LK TN6010 .........................................E59
NG4M500LK TN6025 .........................................E59
NG4M500RK TN6010 .........................................E56
NG4M500RK TN6025 .........................................E56
NG4M550LK TN6025 .........................................E59
NG4M550RK TN6025 .........................................E56
NG4M600LK TN6025 .........................................E59
NG4M600RK TN6025 .........................................E56
NG5M500L TN6025............................................E52
NGD2M150LK TN6010 .......................................E61
NGD2M150LK TN6025 .......................................E61
NGD2M150RK TN6010 .......................................E60
NGD2M150RK TN6025 .......................................E60
NGD2M200LK TN6010 .......................................E61
NGD2M200LK TN6025 .......................................E61
NGD2M200RK TN6010 .......................................E60
NGD2M200RK TN6025 .......................................E60
NGD2M250LK TN6010 .......................................E61
NGD2M250LK TN6025 .......................................E61
NGD2M250RK TN6010 .......................................E60
NGD2M250RK TN6025 .......................................E60
NGD3062LK TN6010 ..........................................E61
NGD3062LK TN6025 ..........................................E61
NGD3062RK TN6010 ..........................................E60
NGD3062RK TN6025 ..........................................E60
NGD3094LK THM ...............................................E61
NGD3094LK TN6010 ..........................................E61
NGD3094LK TN6025 ..........................................E61
NGD3094RK THM ...............................................E60
NGD3094RK TN6010 ..........................................E60
NGD3094RK TN6025 ..........................................E60
NGD3125LK TN6010 ..........................................E61
NGD3125LK TN6025 ..........................................E61
NGD3125RK TN6010 ..........................................E60
NGD3125RK TN6025 ..........................................E60
NGD3189LK TN6010 ..........................................E62
NGD3189LK TN6025 ..........................................E62
NGD3189RK TN6010 ..........................................E60
NGD3189RK TN6025 ..........................................E60
NGD3M200LK TN6010 .......................................E61
NGD3M200LK TN6025 .......................................E61
NGD3M200RK TN6010 .......................................E60
NGD3M200RK TN6025 .......................................E60
NGD3M250LK TN6010 .......................................E61
NGD3M250LK TN6025 .......................................E61
NGD3M250RK TN6010 .......................................E60
NGD3M250RK TN6025 .......................................E60
NGD3M300LK TN6010 .......................................E61
NGD3M300LK TN6025 .......................................E61
NGD3M300RK TN6010 .......................................E60
NGD3M300RK TN6025 .......................................E60
NGD3M350LK TN6025 .......................................E61
NGD3M350RK TN6025 .......................................E60
NGD3M400LK TN6010 .......................................E62
NGD3M400LK TN6025 .......................................E62
NGD3M400RK TN6010 .......................................E60
NGD3M400RK TN6025 .......................................E60
NGD4125LK TN6010 ..........................................E61
NGD4125LK TN6025 ..........................................E61
NGD4125RK TN6010 ..........................................E60
NGD4125RK TN6025 ..........................................E60
NGD4189LK TN6010 ..........................................E62
NGD4189LK TN6025 ..........................................E62
NGD4189RK TN6010 ..........................................E61
NGD4189RK TN6025 ..........................................E61
NGD4250LK TN6010 ..........................................E62
NGD4250LK TN6025 ..........................................E62
NGD4250RK TN6010 ..........................................E61
NGD4250RK TN6025 ..........................................E61
NGD4M400LK TN6010 .......................................E62
NGD4M400LK TN6025 .......................................E62
NGD4M400RK TN6010 .......................................E60
NGD4M400RK TN6025 .......................................E60
NGD4M450LK TN6025 .......................................E62
NGD4M450RK TN6025 .......................................E60
NGD4M500LK TN6025 .......................................E62
NGD4M500RK TN6010 .......................................E61
NGD4M500RK TN6025 .......................................E61
NGD4M550LK TN6025 .......................................E62
NGD4M550RK TN6010 .......................................E61
NGP2062L TN6010 ............................................E64
NGP2062R TN6010 ............................................E63
NGP2M150L THM ...............................................E64
NGP2M150L TN6010 .........................................E64
NGP2M150R THM ..............................................E63
NGP2M150R TN6010 .........................................E63
NGP2M200L THM ...............................................E64
NGP2M200L TN6010 .........................................E64
NGP2M200R THM ..............................................E63
NGP2M200R TN6010 .........................................E63
NGP2M250L THM ...............................................E64
NGP2M250L TN6010 .........................................E64
NGP2M250R THM ..............................................E63
NGP2M250R TN6010 .........................................E63
NGP2M300L THM ...............................................E64
NGP2M300R THM ..............................................E63
NGP2M300R TN6010 .........................................E63
NGP3M150L THM ...............................................E64
NGP3M150L TN6010 .........................................E64
NGP3M150R THM ..............................................E63
NGP3M150R TN6010 .........................................E63
NGP3M200L THM ...............................................E64
NGP3M200L TN6010 .........................................E64
NGP3M200R THM ..............................................E63
NGP3M200R TN6010 .........................................E63
NGP3M250L THM ...............................................E64
NGP3M250L TN6010 .........................................E64
NGP3M250R THM ..............................................E63
NGP3M250R TN6010 .........................................E63
NGP3M300L THM ...............................................E64
NGP3M300L TN6010 .........................................E64
NGP3M300R THM ..............................................E63
NJK3008R20 TN6010.........................................F18
NJP3014R12 TN6025.........................................F18
NL82R W ............................................................F70
NP2002RK TN6010 ............................................E66
NP2002RK TN6025 ............................................E66
NP3002RK TN6010 ............................................E66
NP3002RK TN6025 ............................................E66
NP3012RK TN6025 ............................................E66
NR2031L TN6010 ...............................................E68
NR2031L TN6025 ...............................................E68
NR2031R TN6010 ..............................................E67
NR2031R TN6025 ..............................................E67
NR2047L TN6025 ...............................................E68
NR2047R TN6025 ..............................................E67
NR2M050L TN6010 ............................................E68
NR2M050L TN6025 ............................................E68
NR2M050L TN7110 ............................................E68
NR2M050R TN6010 ...........................................E67
NR2M050R TN6025 ...........................................E67
NR2M075L TN6010 ............................................E68
NR2M075L TN6025 ............................................E68
NR2M075R TN6010 ...........................................E67
NR2M075R TN6025 ...........................................E67
NR2M100L TN6010 ............................................E68
NR2M100L TN6025 ............................................E68
NR2M100L TN7110 ............................................E68
NR2M100R TN6010 ...........................................E67
NR2M100R TN6025 ...........................................E67
NR2M125L TN6010 ............................................E69
NR2M125L TN6025 ............................................E69
NR2M125R TN6010 ...........................................E67
NR2M125R TN6025 ...........................................E67
NR2M150L TN6010 ............................................E69
NR2M150L TN6025 ............................................E69
NR2M150R TN6010 ...........................................E67
NR2M150R TN6025 ...........................................E67
NR2M175L TN6010 ............................................E69
NR2M175L TN6025 ............................................E69
NR2M175R TN6010 ...........................................E67
NR2M175R TN6025 ...........................................E67
NR3031L THM ....................................................E68
NR3031L TN6010 ...............................................E68
NR3031L TN6025 ...............................................E68
NR3031LK TN6010 .............................................E70
NR3031LK TN6025 .............................................E70
NR3031R THM ....................................................E67
NR3031R TN6010 ..............................................E67
NR3031R TN6025 ..............................................E67
NR3031RK TN6010 ............................................E70
NR3031RK TN6025 ............................................E70
NR3047L THM ....................................................E68
NR3047L TN6010 ...............................................E68
NR3047L TN6025 ...............................................E68
NR3047LK TN6010 .............................................E70
NR3047LK TN6025 .............................................E70
NR3047R THM ....................................................E67
NR3047R TN6010 ..............................................E67
NR3047R TN6025 ..............................................E67
NR3047RK TN6010 ............................................E70
NR3047RK TN6025 ............................................E70
NR3062L THM ....................................................E69
NR3062L TN6010 ...............................................E69
NR3062L TN6025 ...............................................E69
NR3062LK TN6010 .............................................E70
NR3062LK TN6025 .............................................E70
NR3062R THM ....................................................E67
NR3062R TN6010 ..............................................E67
NR3062R TN6025 ..............................................E67
NR3062RK TN6010 ............................................E70
NR3062RK TN6025 ............................................E70
NR3078LK TN6010 .............................................E70
NR3078LK TN6025 .............................................E70
NR3078RK TN6010 ............................................E70
NR3078RK TN6025 ............................................E70
NR3094L TN6010 ...............................................E69
NR3094L TN6025 ...............................................E69
NR3094R TN6010 ..............................................E68
NR3094R TN6025 ..............................................E68
NR3M100L TN6010 ............................................E68
NR3M100L TN6025 ............................................E68
NR3M100R TN6010 ...........................................E67
NR3M100R TN6025 ...........................................E67
NR3M125L TN6010 ............................................E69
NR3M125L TN6025 ............................................E69
NR3M125L TN7110 ............................................E69
NR3M125R TN6010 ...........................................E67
NR3M125R TN6025 ...........................................E67
NR3M150L TN6010 ............................................E69
NR3M150L TN6025 ............................................E69
NR3M150R TN6010 ...........................................E67
NR3M150R TN6025 ...........................................E67
NR3M175L TN6010 ............................................E69
NR3M175L TN6025 ............................................E69
NR3M175L TN7110 ............................................E69
NR3M175R TN6010 ...........................................E67
NR3M175R TN6025 ...........................................E67
NR3M200L TN6010 ............................................E69
NR3M200L TN6025 ............................................E69
NR3M200R TN6010 ...........................................E68
NR3M200R TN6025 ...........................................E68
NR3M225L TN6010 ............................................E69
NR3M225L TN6025 ............................................E69
NR3M225R TN6010 ...........................................E68
NR3M225R TN6025 ...........................................E68
NR4062LK TN6010 .............................................E70
NR4062LK TN6025 .............................................E70
NR4062RK TN6025 ............................................E70
NR4094LK TN6010 .............................................E70
NR4094LK TN6025 .............................................E70
NR4094RK TN6010 ............................................E70
NR4094RK TN6025 ............................................E70
NR4125L TN6010 ...............................................E69
NR4125L TN6025 ...............................................E69
NR4125LK TN6010 .............................................E70
NR4125LK TN6025 .............................................E70
NR4125R TN6010 ..............................................E68
NR4125R TN6025 ..............................................E68
NR4125RK TN6010 ............................................E70
NR4125RK TN6025 ............................................E70
NR4M200L TN6010 ............................................E69
NR4M200L TN6025 ............................................E69
NR4M200R TN6010 ...........................................E68
NR4M200R TN6025 ...........................................E68
NR4M225L TN6010 ............................................E69
NR4M225L TN6025 ............................................E69
NR4M225R TN6010 ...........................................E68
NR4M225R TN6025 ...........................................E68
NR4M250L TN6010 ............................................E69
NR4M250L TN6025 ............................................E69
NR4M250R TN6010 ...........................................E68
NR4M250R TN6025 ...........................................E68
NRD3031L TN6010 ............................................E71
NRD3031L TN6025 ............................................E71
NRD3031R TN6010 ............................................E71
NRD3031R TN6025 ............................................E71
NRD3062L TN6010 ............................................E71
Catalogue No. Page(s) Catalogue No. Page(s) Catalogue No. Page(s)
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 108 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRANDO b 28 20153 09PM
Z109
widia.com
Index by Catalogue Number
Catalogue No. Page(s)
NRD3062L TN6025 ............................................E71
NRD3062R TN6010 ............................................E71
NRD3062R TN6025 ............................................E71
NRD4062L TN6010 ............................................E71
NRD4062L TN6025 ............................................E71
NRD4062R TN6010 ............................................E71
NRD4062R TN6025 ............................................E71
NRD4125L TN6010 ............................................E71
NRD4125L TN6025 ............................................E71
NRD4125R TN6025 ............................................E71
NSL062 W ..........................................................F25
NSL082V W ........................................................F25
NSL1010E2 W ............................................E74, F25
NSL102B W ........................................................F25
NSL1212F2 W ............................................E74, F25
NSL122B W ........................................................F25
NSL123A W ........................................................F25
NSL123B W ........................................................F25
NSL1616H2 W ............................................E74, F25
NSL162C W ........................................................F25
NSL163C W ........................................................F25
NSL163D W ........................................................F25
NSL2020K2 W ............................................E74, F25
NSL2020K3 W ............................................E74, F25
NSL203D W ........................................................F25
NSL205D W ........................................................F25
NSL243D W ........................................................F25
NSL243E W ........................................................F25
NSL2525M2 W ...........................................E74, F25
NSL2525M3 W ...........................................E74, F25
NSL2525M4 W ...........................................E74, F25
NSL3225P3 W ............................................E74, F25
NSL3225P4 W ............................................E74, F25
NSL3232P3 W ............................................E74, F25
NSL3232P4 W ............................................E74, F25
NSL3232P5 W ............................................E74, F25
NSL853D W ........................................................F25
NSR062 W ..........................................................F24
NSR082V W ........................................................F24
NSR1010E2 W ............................................E74, F24
NSR102B W ........................................................F24
NSR1212F2 W ............................................E74, F24
NSR122B W ........................................................F24
NSR123A W ........................................................F24
NSR123B W ........................................................F24
NSR1616H2 W ...........................................E74, F24
NSR162C W ........................................................F24
NSR163C W ........................................................F24
NSR163D W........................................................F24
NSR2020K2 W ............................................E74, F24
NSR2020K3 W ............................................E74, F24
NSR203D W........................................................F24
NSR205D W........................................................F24
NSR243D W........................................................F24
NSR243E W ........................................................F24
NSR245D W........................................................F24
NSR2525M2 W ...........................................E74, F24
NSR2525M3 W ...........................................E74, F24
NSR2525M4 W ...........................................E74, F24
NSR3225P3 W ............................................E74, F24
NSR3225P4 W ............................................E74, F24
NSR3232P3 W ............................................E74, F24
NSR3232P4 W ............................................E74, F24
NSR853D W........................................................F24
NST1 ...........................................................C40–41
NST2 ...........................................................C40–41
NST3 ...........................................................C40–41
NT1L TN6010 .....................................................F13
NT1L TN6025 .....................................................F13
NT2L TN6010 .....................................................F14
NT2L TN6025 .....................................................F14
NT2LK TN6010 ...................................................F13
NT2LK TN6025 ...................................................F13
NT2R TN6010 .....................................................F14
NT2R TN6025 .....................................................F14
NT2RK TN6010 ...................................................F13
NT2RK TN6025 ...................................................F13
NT3L TN6010 .....................................................F14
NT3L TN6025 .....................................................F14
NT3LK TN6010 ...................................................F13
NT3LK TN6025 ...................................................F13
NT3R TN6010 .....................................................F14
NT3R TN6025 .....................................................F14
NT3RCK TN6010 ................................................F15
NT3RCK TN6025 ................................................F15
NT3RK TN6010 ...................................................F13
NT3RK TN6025 ...................................................F13
NT4L TN6025 .....................................................F14
NT4R TN6010 .....................................................F14
NT4R TN6025 .....................................................F14
NT4RK TN6025 ...................................................F13
NTB3LB TN6025 .................................................F22
NTC3L12I TN6025 ..............................................F17
NTC3R12E TN6010.............................................F17
NTC3R12E TN6025.............................................F17
NTC3R14E TN6010.............................................F17
NTC3R16E TN6010.............................................F17
NTC3R16E TN6025.............................................F17
NTF2R TN6010 ...................................................F16
NTF2R TN6025 ...................................................F16
NTF3L TN6010 ...................................................F16
NTF3L TN6025 ...................................................F16
NTF3R TN6010 ...................................................F16
NTF3R TN6025 ...................................................F16
NTK2R TN6010 ...................................................F16
NTK2R TN6025 ...................................................F16
NTK3L TN6025 ...................................................F16
NTK3R TN6010 ...................................................F16
NTK3R TN6025 ...................................................F16
NTP2L TN6010 ...................................................F15
NTP2L TN6025 ...................................................F15
NTP2R TN6010 ...................................................F15
NTP2R TN6025 ...................................................F15
NTP3L TN6010 ...................................................F15
NTP3L TN6025 ...................................................F15
NTP3R TN6010 ...................................................F15
NTP3R TN6025 ...................................................F15
NTP4R TN6025 ...................................................F15
NVR102R W ........................................................F74
NVR132R W ........................................................F74
NVR163L W ........................................................F74
NVR163R W ........................................................F74
NVR204R W ........................................................F74
NWC3R11E TN6025 ...........................................F19
NWC3R14E TN6025 ...........................................F19
OVR122R W ........................................................F75
OVR152R W ........................................................F75
PCBNL2020K12 WG .......................................... C20
PCBNL2525M12 WG ......................................... C20
PCBNL2525M16 WG ......................................... C20
PCBNL3225P16 WG .......................................... C20
PCBNL3232P16 WG .......................................... C20
PCBNL3232P19 WG .......................................... C20
PCBNL4040S19 WG .......................................... C20
PCBNR2020K12 WG .......................................... C20
PCBNR2525M12 WG ......................................... C20
PCBNR2525M16 WG ......................................... C20
PCBNR3225P16 WG .......................................... C20
PCBNR3232P16 WG .......................................... C20
PCBNR3232P19 WG .......................................... C20
PCBNR4040S19 WG .......................................... C20
PCKNL2020K12 WG .......................................... C21
PCKNL2525M12 WG ......................................... C21
PCKNL2525M16 WG ......................................... C21
PCKNL3225P16 WG .......................................... C21
PCKNL3232P16 WG .......................................... C21
PCKNL3232P19 WG .......................................... C21
PCKNL4040S19 WG .......................................... C21
PCKNR2020K12 WG .......................................... C21
PCKNR2525M12 WG ......................................... C21
PCKNR2525M16 WG ......................................... C21
PCKNR3225P16 WG .......................................... C21
PCKNR3232P16 WG .......................................... C21
PCKNR3232P19 WG .......................................... C21
PCKNR4040S19 WG .......................................... C21
PCLNL1616H09 WG .......................................... C22
PCLNL1616H12 WG .......................................... C22
PCLNL16CA12 WG .......................................... C104
PCLNL2020K12 WG........................................... C22
PCLNL20CA16 WG .......................................... C104
PCLNL2525M12 WG .......................................... C22
PCLNL2525M16 WG .......................................... C22
PCLNL3225P12 WG........................................... C22
PCLNL3225P19 WG........................................... C22
PCLNL3232P16 WG........................................... C22
PCLNL3232P19 WG........................................... C22
PCLNL4040S19 WG........................................... C22
PCLNR12CA12 WG .......................................... C104
PCLNR1616H09 WG .......................................... C22
PCLNR1616H12 WG .......................................... C22
PCLNR16CA12 WG .......................................... C104
PCLNR2020K12 WG .......................................... C22
PCLNR2525M12 WG ......................................... C22
PCLNR2525M16 WG ......................................... C22
PCLNR3225P12 WG .......................................... C22
PCLNR3225P16 WG .......................................... C22
PCLNR3225P19 WG .......................................... C22
PCLNR3232P16 WG .......................................... C22
PCLNR3232P19 WG .......................................... C22
PCLNR4040S19 WG .......................................... C22
PDJNL1616H11 WG .......................................... C23
PDJNL2020K11 WG........................................... C23
PDJNL2020K15 WG........................................... C23
PDJNL2525M11 WG .......................................... C23
PDJNL2525M15 WG .......................................... C23
PDJNL3225P15 WG........................................... C23
PDJNL3232P15 WG........................................... C23
PDJNL4025R15 WG .......................................... C23
PDJNR1616H11 WG .......................................... C23
PDJNR2020K11 WG .......................................... C23
PDJNR2020K15 WG .......................................... C23
PDJNR2525M11 WG ......................................... C23
PDJNR3225P15 WG .......................................... C23
PDJNR3232P15 WG .......................................... C23
PDJNR4025R15 WG .......................................... C23
PDNNL2525M15 WG ......................................... C24
PDNNL3225P15 WG .......................................... C24
PDNNR2525M15 WG ......................................... C24
PDNNR3225P15 WG .......................................... C24
PDNNR4025M15 WG ......................................... C24
PSBNL2020K12 WG .......................................... C25
PSBNL2525M12 WG ......................................... C25
PSBNL2525M15 WG ......................................... C25
PSBNL3232P15 WG .......................................... C25
PSBNL3232P19 WG .......................................... C25
PSBNL4040S19 WG .......................................... C25
PSBNL4040S25 WG .......................................... C25
PSBNL5050T25 WG........................................... C25
PSBNR2020K12 WG .......................................... C25
PSBNR2525M12 WG ......................................... C25
PSBNR2525M15 WG ......................................... C25
PSBNR3232P15 WG .......................................... C25
PSBNR3232P19 WG .......................................... C25
PSBNR4040S19 WG .......................................... C25
PSBNR4040S25 WG .......................................... C25
PSDNN1616H09 WG.......................................... C26
PSDNN2020K12 WG .......................................... C26
PSDNN2525M12 WG ......................................... C26
PSDNN3225P15 WG .......................................... C26
PSDNN3232P15 WG .......................................... C26
PSDNN4040S25 WG .......................................... C26
PSKNL1616H09 WG .......................................... C26
PSKNL16CA12 WG ..........................................C105
PSKNL2020K12 WG .......................................... C26
PSKNL2525M12 WG.......................................... C26
PSKNL3232P19 WG .......................................... C26
PSKNL4040S19 WG .......................................... C26
PSKNR12CA12 WG .......................................... C105
PSKNR16CA12 WG .......................................... C105
PSKNR2020K12 WG .......................................... C26
PSKNR20CA15 WG .......................................... C105
PSKNR2525M12 WG ......................................... C26
PSKNR2525M15 WG ......................................... C26
PSKNR3232P19 WG .......................................... C26
PSKNR4040S19 WG .......................................... C26
PSSNL1616H09 WG .......................................... C27
PSSNL2020K09 WG .......................................... C27
PSSNL2020K12 WG .......................................... C27
PSSNL2525M12 WG.......................................... C27
PSSNL2525M15 WG.......................................... C27
PSSNL3225P12 WG .......................................... C27
PSSNL3225P15 WG .......................................... C27
PSSNL3232P15 WG .......................................... C27
PSSNL3232P19 WG .......................................... C27
PSSNL4040S19 WG .......................................... C27
PSSNL4040S25 WG .......................................... C27
PSSNR1616H09 WG .......................................... C27
PSSNR2020K09 WG .......................................... C27
PSSNR2020K12 WG .......................................... C27
PSSNR2525M12 WG ......................................... C27
PSSNR2525M15 WG ......................................... C27
PSSNR3225P12 WG .......................................... C27
PSSNR3225P15 WG .......................................... C27
PSSNR3232P15 WG .......................................... C27
PSSNR3232P19 WG .......................................... C27
PSSNR4040S19 WG .......................................... C27
PTFNL1616H16 WG ........................................... C28
PTFNL2020K16 WG ........................................... C28
PTFNL2525M16 WG .......................................... C28
PTFNR1616H16 WG .......................................... C28
PTFNR2020K16 WG........................................... C28
PTFNR2525M16 WG .......................................... C28
PTFNR2525M22 WG .......................................... C28
PTFNR3225P22 WG........................................... C28
PTFNR3232P22 WG........................................... C28
PTGNL1616H16 WG .......................................... C29
PTGNL2020K16 WG .......................................... C29
PTGNL2525M16 WG ......................................... C29
PTGNL2525M22 WG ......................................... C29
PTGNL3232P22 WG .......................................... C29
PTGNL4040T27 WG........................................... C29
PTGNR1616H16 WG .......................................... C29
Catalogue No. Page(s) Catalogue No. Page(s) Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 109 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRAND O b 28 2015 3 09 PM
Z110 widia.com
Index by Catalogue Number
Index
Catalogue No. Page(s)
PTGNR2020K16 WG .......................................... C29
PTGNR2525M16 WG ......................................... C29
PTGNR2525M22 WG ......................................... C29
PTGNR3225P22 WG .......................................... C29
PTGNR3232P22 WG .......................................... C29
PTGNR4040T27 WG .......................................... C29
PWLNL1616H06 WG ......................................... C30
PWLNL2020K06 WG .......................................... C30
PWLNL2020K08 WG .......................................... C30
PWLNL2525M06 WG ......................................... C30
PWLNL2525M08 WG ......................................... C30
PWLNL3232P08 WG .......................................... C30
PWLNR1616H06 WG ......................................... C30
PWLNR2020K06 WG ......................................... C30
PWLNR2020K08 WG ......................................... C30
PWLNR2525M06 WG ........................................ C30
PWLNR2525M08 WG ........................................ C30
PWLNR3232P08 WG ......................................... C30
Q8BIT WG ..........................................D59, D71, D84
Q8KEY WG .........................................D59, D71, D84
QBIT WG ............................................D59, D71, D84
QC15 WG ..........................................D59, D71, D84
QC21 ................................................................. D19
QC21 WG ...........................D18–20, D59, D71, D84
QC26 ........................................................... D18–20
QCBM102540R WG ........................................... D20
QCBM102545R WG ........................................... D20
QCBM122540L WG ...........................................D20
QCBM122545L WG ...........................................D20
QCBM122545R WG ........................................... D20
QCBMW102543L WG ........................................ D24
QCBMW102543R WG ........................................ D24
QCBMW122543L WG ........................................ D24
QKEY WG ...........................................D59, D71, D84
QSBM101270L WG ........................................... D18
QSBM101275L WG ........................................... D18
QSBM101275R WG ........................................... D18
QSBM121520L WG ........................................... D18
QSBM1316385L WG ......................................... D19
QSBM1316385R WG ......................................... D19
QSBM1316635L WG ......................................... D19
QSBM1316635R WG ......................................... D19
QSBM15920630R WG ....................................... D19
QSBM15920635R WG ....................................... D19
QSBM9912295R WG ......................................... D19
QSBM9912480R WG ......................................... D19
QSBM9912485L WG ......................................... D19
QSBM9912485R WG ......................................... D19
QSBM9916295L WG ......................................... D19
QSBM9916295R WG ......................................... D19
QSBM9916480R WG ......................................... D19
QSBM9916485R WG ......................................... D19
QSBM9920385L WG ......................................... D19
QSBM9920385R WG ......................................... D19
QSBMW101273L WG ........................................D24
QSBMW121523R WG ........................................ D24
QSOM9516385R WG ......................................... D20
QTBIT WG ..........................................D59, D71, D84
QTM20 WG ............................... D24, D59, D71, D84
QTM26 WG ........................................D59, D71, D84
RCGT0803M0AL1 HCK10 ................................ B156
RCGT0803M0AL1 HWK10 ............................... B156
RCGX060400T01020 CW3020 ........................ B183
RCGX090700T01020 CW2015 ........................ B183
RCGX090700T01020 CW3020 ........................ B183
RCGX090700T02020 CW2015 ........................ B183
RCGX090700T07015 CW2015 ........................ B183
RCGX120700T01020 CW3020 ........................ B183
RCGX120700T02020 CW2015 ........................ B183
RCGX120700T20015 CW2015 ........................ B183
RCMT0602M0 THM ........................................... B65
RCMT0602M0 WK20CT ..................................... B65
RCMT0602M0 WP15CT ..................................... B65
RCMT0602M0 WP25CT ..................................... B65
RCMT0803M0 THM ........................................... B65
RCMT0803M0 WK20CT ..................................... B65
RCMT0803M0 WP15CT ..................................... B65
RCMT0803M0 WP25CT ..................................... B65
RCMT10T3M0 THM ........................................... B65
RCMT10T3M0 TTR ............................................ B65
RCMT10T3M0 WK20CT ..................................... B65
RCMT10T3M0 WP15CT ..................................... B65
RCMT10T3M0 WP25CT ..................................... B65
RCMT10T3M0 WP35CT ..................................... B65
RCMT1204M0 THM ........................................... B65
RCMT1204M0 WK20CT ..................................... B65
RCMT1204M0 WP15CT ..................................... B65
RCMT1204M0 WP25CT ..................................... B65
RCMT1204M0 WP35CT ..................................... B65
RCMT1606M0 WK20CT ..................................... B65
RCMT1606M0 WP15CT ..................................... B65
RCMT1606M0 WP35CT ..................................... B65
RCMT1606M043 THM ....................................... B65
RCMT1606M043M TN6540...............................M97
RCMT1606M043M TN7525...............................M97
RCMT1606M043M TN7535...............................M97
RCMT1606M0T WP25CT ................................... B66
RCMT1606M0TX TN2510 ..................................M97
RCMT1606M0TX TN6525 ..................................M97
RCMT1606M0TX TN6540 ..................................M97
RCMT1606M0TX TN7525 ..................................M97
RCMT1606M0TX TN7535 ..................................M97
RCMX2006M0T WK20CT ................................... B66
RCMX2006M0T WP15CT ................................... B66
RCMX2006M0T WP25CT ................................... B66
RCMX2006M0T WP35CT ................................... B66
RCMX2507M0T TTR .......................................... B66
RCMX2507M0T WK20CT ................................... B66
RCMX2507M0T WP15CT ................................... B66
RCMX2507M0T WP25CT ................................... B66
RCMX2507M0T WP35CT ................................... B66
RCMX3209M0T WP15CT ................................... B66
RDHT0802M0T TN7525 ....................................M75
RDHT1003M0T TN7525 ....................................M80
RDHT1204M0TX TN7525 ..................................M86
RDHT1605M0TX TTI25 ......................................M92
RDHW1003M0MH TN2510 ................................M80
RDHW1204M0MH TN2510 ................................M86
RDHX07T1M0SNMH TN2505 .............................M44
RDHX07T1M0SNMH TN6525 .............................M44
RDHX07T1M0SNMH TN6540 .............................M44
RDMT0802M0T TN7525 ....................................M75
RDMT0802M0T TN7535 ....................................M75
RDMT1003M0T TN6525 ....................................M81
RDMT1003M0T TN6540 ....................................M81
RDMT1003M0T TN7525 ....................................M81
RDMT1003M0T TN7535 ....................................M81
RDMT1204M0TX TN2510 ..................................M87
RDMT1204M0TX TN6525 ..................................M87
RDMT1204M0TX TN6540 ..................................M87
RDMT1204M0TX TN7525 ..................................M87
RDMT1204M0TX TN7535 ..................................M87
RDMT1204M0TX WS30PM ................................M87
RDMT1605M0TX TN6525 ..................................M92
RDMT1605M0TX TN6540 ..................................M92
RDMT1605M0TX TN7525 ..................................M92
RDMT1605M0TX TN7535 ..................................M92
RDMW0802M0 THM ..........................................M76
RDMW0802M0 TN2510 ....................................M76
RDMW0802M0T TN6540 ..................................M76
RDMW0802M0T TN7535 ..................................M76
RDMW1003M0 TN2510 ....................................M81
RDMW1003M0T TN6540 ..................................M81
RDMW1003M0T TN7525 ..................................M81
RDMW1003M0T TN7535 ..................................M81
RDMW1003M0T TTI25 ......................................M81
RDMW1204M0TX TN2510 ................................M87
RDMW1204M0TX TN6540 ................................M87
RDMW1204M0TX TN7525 ................................M87
RDMW1204M0TX TN7535 ................................M87
RDMW1204M0TX WK15CM ..............................M87
RDMW1605M0TX TN6540 ................................M93
RDMW1605M0TX TN7525 ................................M93
RDMW1605M0TX TN7535 ................................M93
RDPT1204M0SMMX TN6540 ............................M87
RDPT1204M0SMMX TN7535 ............................M87
RDPX0702M0SNMH TN2505 .............................M49
RDPX0702M0SNMH TN6525 .............................M49
RDPX0702M0SNMH TN6540 .............................M49
RDPX1003M0SNMH TN2505 .............................M56
RDPX1003M0SNMH TN6525 .............................M56
RDPX1003M0SNMH TN6540 .............................M56
RDPX1003M0SNMM TN6525 ............................M56
RDPX1003M0SNMM TN6540 ............................M56
RDPX12T3M0SNMH TN2505 .............................M63
RDPX12T3M0SNMH TN6525 .............................M63
RDPX12T3M0SNMH TN6540 .............................M63
RDPX12T3M0SNMM TN6525 ............................M63
RDPX12T3M0SNMM TN6540 ............................M63
RDPX1604M0SNMH TN2505 .............................M68
RDPX1604M0SNMH TN6525 .............................M68
RDPX1604M0SNMH TN6540 .............................M68
RDPX1604M0SNMM TN6525 ............................M68
RDPX1604M0SNMM TN6540 ............................M68
RFX185FBH022029 WG ................................... W52
RFX185LS WG ................................W56, W58, W60,
W62, W65–66
RFX185RFX185030M WG ................................. W65
RFX185TCHS022030 WG ................................. W36
RFX245FBH029038 WG ................................... W52
RFX245LS WG ................................W56, W58, W60,
W62, W65–66
RFX245RFX245035M WG ................................. W65
RFX245TCHS030039 WG ................................. W36
RFX320FBH038050 WG ................................... W52
RFX320LS WG .............................W56–62, W65–66
RFX320RFX185030M WG ................................. W66
RFX320RFX245040M WG ................................. W66
RFX320RFX320050M WG ................................. W65
RFX320TCHS039050 WG ................................. W36
RFX420FBH050065 WG ................................... W52
RFX420FBHBB006022 WG ............................... W49
RFX420LS WG .............................W56–63, W65–66
RFX420RFX185035M WG ................................. W66
RFX420RFX245045M WG ................................. W66
RFX420RFX320045M WG ................................. W66
RFX420RFX420060M WG ................................. W65
RFX420TCHS050067 WG ................................. W36
RFX550CS27030M WG .................................... W64
RFX550FBH065088 WG ................................... W52
RFX550LS WG .............................W56–63, W65–66
RFX550RFX185040M WG ................................. W66
RFX550RFX245050M WG ................................. W66
RFX550RFX320050M WG ................................. W66
RFX550RFX420055M WG ................................. W66
RFX550RFX550090M WG ................................. W65
RFX550TCHS067088 WG ................................. W36
RFX720CS40035M WG .................................... W64
RFX720FBH088115 WG ................................... W52
RFX720LS WG ................. W57, W59, W61–63, W65
RFX720RFX420060M WG ................................. W66
RFX720RFX550060M WG ................................. W66
RFX720RFX720100M WG ................................. W65
RFX720TCHS088115 WG ................................. W36
RNGJ10T3M0EML WP25PM ..............................M24
RNGJ10T3M0EML WP35CM ..............................M24
RNGJ10T3M0EML WS30PM ..............................M24
RNGJ10T3M0EML WU35PM ..............................M24
RNGJ10T3M0SMM WP25PM .............................M24
RNGJ10T3M0SMM WS30PM .............................M24
RNGJ10T3M0SMM WU35PM.............................M24
RNGJ1204M0EML WP25PM ..............................M32
RNGJ1204M0EML WP35CM ..............................M32
RNGJ1204M0EML WS30PM ..............................M32
RNGJ1204M0EML WU35PM ..............................M32
RNGJ1204M0SMH WK15PM .............................M33
RNGJ1204M0SMH WP25PM .............................M33
RNGJ1204M0SMH WP35CM .............................M33
RNGJ1204M0SMH WU35PM .............................M33
RNGJ1204M0SMM WK15PM ............................M32
RNGJ1204M0SMM WP25PM ............................M32
RNGJ1204M0SMM WP35CM ............................M32
RNGJ1204M0SMM WS30PM ............................M32
RNGJ1204M0SMM WU35PM ............................M32
RNGJ1605M0EML WP25PM ..............................M37
RNGJ1605M0EML WP35CM ..............................M37
RNGJ1605M0EML WS30PM ..............................M37
RNGJ1605M0EML WU35PM ..............................M37
RNGN090300T01020 CW3020 ....................... B184
RNGN090400T02020 CW2015 ....................... B184
RNGN120400T01020 CW3020 ....................... B184
RNGN120400T02020 CW2015 ....................... B184
RNGN120400T02020 CW5025 ....................... B184
RNGN120700T01020 CW3020 ....................... B184
RNGN120700T02020 CW2015 ....................... B184
RNGN120700T10015 CW2015 ....................... B184
RNGN120700T20015 CW2015 ....................... B184
RNGN150700T02020 CW2015 ....................... B184
RNGN150700T02020 CW5025 ....................... B184
RNMA120400 WK05CT ..................................... B67
RNMA120400 WK20CT ..................................... B67
RNMG090300RH WP15CT ................................. B67
RNMG090300RH WP25CT ................................. B67
RNMG120400RH WP15CT ................................. B67
RNMG120400RH WP25CT ................................. B67
RNMG120400RH WP35CT ................................. B67
RNMG12047N TN20K ...................................... B133
RNMG12047N TN20P ...................................... B133
RNMG190600RH WK20CT ................................. B67
RNMG190600RH WP15CT ................................. B67
RNMG190600RH WP25CT ................................. B67
RNMG190600RH WP35CT ................................. B67
RNMG19067N TN10P ...................................... B133
RNMG19067N TN20P ...................................... B133
RNMN090300S02020 WBK40U....................... B210
RNMN120300S02020 WBH40C ...................... B210
RNMN120300S02020 WBK40U....................... B210
RNMN120400S02020 WBK40U....................... B210
RNPJ10T3M0SMH WK15CM .............................M25
RNPJ10T3M0SMH WP20CM .............................M25
RNPJ10T3M0SMH WP25PM ..............................M25
RNPJ10T3M0SMH WP35CM .............................M25
Catalogue No. Page(s) Catalogue No. Page(s) Catalogue No. Page(s)
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 110 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRANDO b 28 20153 09PM
Z111
widia.com
Index by Catalogue Number
Catalogue No. Page(s)
RNPJ10T3M0SMH WP40PM ..............................M25
RNPJ10T3M0SMH WU35PM..............................M25
RNPJ10T3M0SMM WP20CM .............................M25
RNPJ10T3M0SMM WP25PM .............................M25
RNPJ10T3M0SMM WP35CM .............................M25
RNPJ10T3M0SMM WP40PM .............................M25
RNPJ1204M0SMH WK15CM .............................M33
RNPJ1204M0SMH WP20CM .............................M33
RNPJ1204M0SMH WP25PM .............................M33
RNPJ1204M0SMH WP35CM .............................M33
RNPJ1204M0SMH WP40PM .............................M33
RNPJ1204M0SMH WU35PM .............................M33
RNPJ1204M0SMM WP20CM.............................M33
RNPJ1204M0SMM WP25PM .............................M33
RNPJ1204M0SMM WP35CM.............................M33
RNPJ1204M0SMM WP40PM .............................M33
RNPJ1204M0SMM WU35PM .............................M33
RNPJ1605M0SMH WK15CM .............................M38
RNPJ1605M0SMH WP20CM .............................M38
RNPJ1605M0SMH WP25PM .............................M38
RNPJ1605M0SMH WP35CM .............................M38
RNPJ1605M0SMH WP40PM .............................M38
RNPJ1605M0SMH WU35PM .............................M38
RNPJ1605M0SMM WP20CM.............................M38
RNPJ1605M0SMM WP25PM .............................M38
RNPJ1605M0SMM WP35CM.............................M38
RNPJ1605M0SMM WP40PM .............................M38
RNPJ1605M0SMM WU35PM .............................M38
RPGX060400T01020 CW3020 ........................ B185
RPGX090700T01020 CW3020 ........................ B185
RPGX120700T01020 CW3020 ........................ B185
S2112 ......................................................... F24–25
S310 ........................................................... F24–25
S32SCCLNL12MX7 WG ..................................... C62
S32SCCLNR12MX7 WG ..................................... C62
S352 ........................................................... F24–25
S40TCCLNL12MN4 WG ..................................... C62
S40TCCLNL12MN7 WG ..................................... C62
S40TCCLNL12MX7 WG...................................... C62
S40TCCLNR12MN4 WG ..................................... C62
S40TCCLNR12MN7 WG ..................................... C62
S40TCCLNR12MX7 WG ..................................... C62
S40TCDQNL12MX7 WG ..................................... C63
S40TCDQNR12MX7 WG..................................... C63
S40TCSSNL12MX7 WG ..................................... C63
S40TCSSNR12MX7 WG ..................................... C63
S40TCSYNL12MN7 WG ..................................... C64
S40TCSYNR12MN7 WG ..................................... C64
S40TCWLNL08MX7 WG ..................................... C64
S40TCWLNR08MX7 WG .................................... C64
SALS063 ........................................................... H64
SALS080 ........................................................... H64
SALS100 ........................................................... H64
SALS125 ........................................................... H64
SALS160 ........................................................... H64
SBIT WG ............................................D59, D71, D84
SC30 WG ............................D21–22, D59, D71, D84
SCBM162540L WG ............................................ D21
SCBM162540R WG ...........................................D21
SCBM162545L WG ............................................ D21
SCBM162545R WG ...........................................D21
SCBM202540L WG ............................................ D21
SCBM202545L WG ............................................ D21
SCBM202545R WG ...........................................D21
SCDPL1212H06 WG .......................................... C42
SCDPR1212H06 WG .......................................... C42
SCFPL08CA06 WG ........................................... C110
SCFPR06CA05 WG ..........................................C110
SCFPR08CA06 WG ..........................................C110
SCFPR10CA09 WG ..........................................C110
SCGN090412T00520 CW5025 ....................... B186
SCGPL08CA06 WG .......................................... C111
SCGPR08CA06 WG .......................................... C111
SCGT120408AL3 HWK15 ................................ B156
SCLCL1010E06 WG ........................................... C42
SCLCL1212F06 WG ........................................... C42
SCLCL1212F09 WG ........................................... C42
SCLCL12CA12 WG .......................................... C112
SCLCL1616H09 WG .......................................... C42
SCLCL16CA12 WG .......................................... C112
SCLCL2020K09 WG ........................................... C42
SCLCL2020K12 WG ........................................... C42
SCLCL2525M12 WG .......................................... C42
SCLCR1010E06 WG .......................................... C42
SCLCR10CA09 WG .......................................... C112
SCLCR1212F06 WG........................................... C42
SCLCR1212F09 WG........................................... C42
SCLCR12CA12 WG .......................................... C112
SCLCR1616H09 WG .......................................... C42
SCLCR2020K09 WG .......................................... C42
SCLCR2020K12 WG .......................................... C42
SCLCR2525M12 WG ......................................... C42
SCLPL06CA05 WG ........................................... C113
SCLPL08CA06 WG ........................................... C113
SCLPL10CA09 WG ........................................... C113
SCLPL1212M06 WG .......................................... C43
SCLPR06CA05 WG ..........................................C113
SCLPR08CA06 WG ..........................................C113
SCLPR1010M06 WG.......................................... C43
SCLPR10CA09 WG ..........................................C113
SCLPR1212M06 WG.......................................... C43
SCMT090304 TN7115 ....................................... B68
SCMT090304 TTR ............................................. B68
SCMT090308MU TN5120.................................. B69
SCMT090308MU WK20CT................................. B69
SCMT090308MU WP15CT................................. B69
SCMT09T304 THM ............................................ B68
SCMT09T3041P TN10P ................................... B134
SCMT09T3041P TN10U ................................... B134
SCMT09T3041P TN15M .................................. B134
SCMT09T3041P TN20K ................................... B134
SCMT09T3041P TN20P ................................... B134
SCMT09T3041P TN30M .................................. B134
SCMT09T304FP WK20CT .................................. B68
SCMT09T304FP WM15CT ................................. B68
SCMT09T304FP WM25CT ................................. B68
SCMT09T304FP WP15CT .................................. B68
SCMT09T304FP WP25CT .................................. B68
SCMT09T304MP WK20CT ................................. B69
SCMT09T304MP WM15CT ................................ B69
SCMT09T304MP WM25CT ................................ B69
SCMT09T304MP WP25CT ................................. B69
SCMT09T304MU TN8025 .................................. B69
SCMT09T304MU WM25CT ................................ B69
SCMT09T308 THM ............................................ B68
SCMT09T308 TTR ............................................. B68
SCMT09T3081P TN10P ................................... B134
SCMT09T3081P TN10U ................................... B134
SCMT09T3081P TN15M .................................. B134
SCMT09T3081P TN20K ................................... B134
SCMT09T3081P TN20P ................................... B134
SCMT09T3081P TN30M .................................. B134
SCMT09T308FP WK20CT .................................. B68
SCMT09T308FP WM15CT ................................. B68
SCMT09T308FP WM25CT ................................. B68
SCMT09T308FP WP15CT .................................. B68
SCMT09T308FP WP25CT .................................. B68
SCMT09T308MP WK20CT ................................. B69
SCMT09T308MP WM15CT ................................ B69
SCMT09T308MP WM25CT ................................ B69
SCMT09T308MP WP15CT ................................. B69
SCMT09T308MP WP25CT ................................. B69
SCMT09T308MU TN5120 .................................. B69
SCMT09T308MU WK20CT ................................. B69
SCMT09T308MU WM25CT ................................ B69
SCMT09T308MU WP15CT ................................. B69
SCMT09T308MU WP25CT ................................. B69
SCMT09T308MU WP35CT ................................. B69
SCMT09T308MU WS10PT ................................. B69
SCMT1204041P TN10U .................................. B134
SCMT120404FP WM25CT ................................. B68
SCMT120404FP WP25CT .................................. B68
SCMT120404MP WK20CT ................................. B69
SCMT120404MP WM15CT ................................ B69
SCMT120404MP WM25CT ................................ B69
SCMT120404MP WP25CT ................................. B69
SCMT120408 THM ............................................ B68
SCMT120408 TTR ............................................. B68
SCMT1204081P TN10P ................................... B134
SCMT1204081P TN10U .................................. B134
SCMT1204081P TN15M .................................. B134
SCMT1204081P TN20K ................................... B134
SCMT1204081P TN20P ................................... B134
SCMT1204081P TN30M .................................. B134
SCMT120408FP WK20CT .................................. B68
SCMT120408FP WM15CT ................................. B68
SCMT120408FP WM25CT ................................. B68
SCMT120408FP WP15CT .................................. B68
SCMT120408FP WP25CT .................................. B68
SCMT120408MP WK20CT ................................. B69
SCMT120408MP WM15CT ................................ B69
SCMT120408MP WM25CT ................................ B69
SCMT120408MP WP15CT ................................. B69
SCMT120408MP WP25CT ................................. B69
SCMT120412 THM ............................................ B68
SCMT120412 TTI15 .......................................... B68
SCMT120412FP WK20CT .................................. B68
SCMT120412FP WM25CT ................................. B68
SCMT120412FP WP15CT .................................. B68
SCMT120412FP WP25CT .................................. B68
SCMT120412MP WK20CT ................................. B69
SCMT120412MP WM15CT ................................ B69
SCMT120412MP WM25CT ................................ B69
SCMT120412MP WP25CT ................................. B69
SCMT150512 THM ............................................ B68
SCMT150512 TTR ............................................. B68
SCMW090304 THM ........................................... B70
SCMW090304 WK05CT .................................... B70
SCMW090304 WK20CT .................................... B70
SCMW09T308 SP0G00 ..................................... B70
SCMW09T308 WK20CT ..................................... B70
SCMW120408 THM ........................................... B70
SCMW120408 WK05CT .................................... B70
SCMW120408 WK20CT .................................... B70
SCRPL08CA06 WG ..........................................C114
SCRPR08CA06 WG .......................................... C114
SCSPR06CA05 WG .......................................... C115
SCSPR08CA06 WG .......................................... C115
SCTPL08CA06 WG........................................... C116
SCTPR06CA05 WG .......................................... C116
SCTPR08CA06 WG .......................................... C116
SCUN120412T00520 CW2015 ....................... B186
SCWPL08CA06 WG .........................................C117
SCWPR08CA06 WG ......................................... C117
SDBM162540L WG............................................ D22
SDBM162540R WG ........................................... D22
SDBM162545L WG............................................ D22
SDBM162545R WG ........................................... D22
SDBM202540L WG............................................ D22
SDBM202540R WG ........................................... D22
SDBM202545L WG............................................ D22
SDBM202545R WG ........................................... D22
SDEX120408FRALP THM-U ................................J46
SDHCL1616H11 WG .......................................... C43
SDHCL2020K11 WG .......................................... C43
SDHCL2525M11 WG ......................................... C43
SDHCL2525M15 WG ......................................... C43
SDHCR1616H11 WG .......................................... C43
SDHCR2020K11 WG .......................................... C43
SDHCR2525M11 WG ......................................... C43
SDHCR2525M15 WG ......................................... C43
SDJCL1010E07 WG ........................................... C44
SDJCL1212F07 WG ........................................... C44
SDJCL1212F11 WG ........................................... C44
SDJCL1616H07 WG .......................................... C44
SDJCL1616H11 W ............................................. C44
SDJCL1616H11 WG .......................................... C44
SDJCL2020K07 WG ........................................... C44
SDJCL2020K11 WG ........................................... C44
SDJCL2020K15 WG ........................................... C44
SDJCL2525M11 WG .......................................... C44
SDJCL2525M15 WG .......................................... C44
SDJCL3225P15 WG ........................................... C44
SDJCR1010M07 WG ......................................... C44
SDJCR1212F07 WG........................................... C44
SDJCR1212F11 WG........................................... C44
SDJCR1616H07 WG .......................................... C44
SDJCR1616H11 WG .......................................... C44
SDJCR2020K07 WG .......................................... C44
SDJCR2020K11 WG .......................................... C44
SDJCR2020K15 WG .......................................... C44
SDJCR2525M11 WG ......................................... C44
SDJCR2525M15 WG ......................................... C44
SDJCR3225P15 WG .......................................... C44
SDJPL10CA07 WG ........................................... C118
SDJPR10CA07 WG ..........................................C118
SDMT1204PDRMH THM ...............................J46, K7
SDMT1204PDRMH TN2510 ................................J46
SDMT1204PDRMH TN6520 ..........................J46, K7
SDMT1204PDRMH TN6525 ..........................J46, K7
SDMT1204PDRMH TN6540 ..........................J46, K7
SDMT1204PDRMH TN7525 ..........................J46, K7
SDMT1204PDRMH TN7535 ..........................J46, K7
SDMT1204PDRMH WK15CM ........................J46, K7
SDMT1204PDRML THM ................................J45, K6
SDMT1204PDRML TN6520 ..........................J45, K6
SDMT1204PDRML TN6540 ..........................J45, K6
SDMT1204PDRML TN7525 ..........................J45, K6
SDMT1204PDRML TN7535 ..........................J45, K6
SDMT1204PDRML WK15CM ........................J45, K6
SDMT1506PDRMH TN2510 ................................J50
SDMT1506PDRMH TN6540 ................................J50
SDMT1506PDRMH TN7525 ................................J50
SDMT1506PDRMH TN7535 ................................J50
SDMT1506PDRMH WK15CM ..............................J50
SDMT1506PDRML TN6540 ................................J49
SDMT1506PDRML TN7525 ................................J49
SDMT1506PDRML TN7535 ................................J49
SDMT1506PDRML WK15CM ..............................J49
SDMW090308 THM ...............................................I8
SDMW090308 TN7525 .........................................I8
SDMX120408RMH TN6540 ..........................J46, K7
Catalogue No. Page(s) Catalogue No. Page(s) Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 111 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRAND O b 28 2015 3 09 PM
Z112 widia.com
Index by Catalogue Number
Index
Catalogue No. Page(s)
SDMX120408RMH TN7525 ..........................J46, K7
SDMX120408RMH TN7535 ..........................J46, K7
SDMX120408RMH WK15CM ........................J46, K7
SDMX120408RMM TN6525 .........................J45, K6
SDMX120408RMM TN6540 .........................J45, K6
SDMX120408RMM TN7525 .........................J45, K6
SDMX120408RMM TN7535 .........................J45, K6
SDMX120408RMM WS30PM .......................J45, K6
SDMX120412RMH TN6520 ..........................J46, K7
SDMX120412RMH TN6525 ..........................J46, K7
SDMX120412RMH TN6540 ..........................J46, K7
SDMX120412RMH TN7525 ..........................J46, K7
SDMX120412RMH TN7535 ..........................J46, K7
SDMX120412RMH WK15CM ........................J46, K7
SDMX120412RMM TN6525 .........................J45, K6
SDMX120412RMM TN6540 .........................J45, K6
SDMX120412RMM TN7525 .........................J45, K6
SDMX120412RMM TN7535 .........................J45, K6
SDMX120412RMM WS30PM .......................J45, K6
SDMX120416RMH TN6540 ..........................J46, K7
SDMX120416RMH TN7535 ..........................J46, K7
SDMX120416RMM TN6520 .........................J45, K6
SDMX120416RMM TN6525 .........................J45, K6
SDMX120416RMM TN6540 .........................J45, K6
SDMX120424RMM TN6540 .........................J45, K6
SDMX120424RMM TN7535 .........................J45, K6
SDMX120432RMM TN6540 .........................J45, K6
SDMX120432RMM TN7535 .........................J45, K6
SDMX150612RMH TN6540 ................................J50
SDMX150612RMH TN7525 ................................J50
SDMX150612RMH TN7535 ................................J50
SDMX150612RMH WK15CM ..............................J50
SDMX150612RMM TN6540 ...............................J49
SDMX150612RMM TN7525 ...............................J49
SDMX150616RMH TN6540 ................................J50
SDMX150616RMH TN7535 ................................J50
SDNCN0808L07 WG .......................................... C45
SDNCN1010M07 WG ......................................... C45
SDNCN1212F11 WG .......................................... C45
SDNCN1616H11 WG ......................................... C45
SDNCN2020K11 WG.......................................... C45
SDNCN2525M11 WG ......................................... C45
SDNCN2525M15 WG ......................................... C45
SDNCN3225P15 WG.......................................... C45
SDNT090308 TN450 .............................................I8
SDNT090308 TN7525 ...........................................I8
SDNT090308 TN7535 ...........................................I8
SDNT090308T SPTM00 ........................................I8
SDNT090308T TN2510 .........................................I8
SDR100031E0NW WDN00U .............................. H66
SDR100031E0W4 WDN00U............................... H66
SDR100031E1W4 WDN00U............................... H66
SDR100093E1W4 WDN00U............................... H66
SDR102 WDN00U .............................................. H66
SF06306RH W ................................................... H64
SF08008RH W ................................................... H64
SF10012RH W ................................................... H64
SF12515RH W ................................................... H64
SF16018RH W ................................................... H64
SF20024RH W ................................................... H64
SKCP343 K9 ...................................................... C42
SKCP453 K9 .............................................. C42, C67
SKDP343 K9 ................................................C43–45
SKDP453 K9 ........................................C43–45, C73
SKEY WG ...........................................D59, D71, D84
SKRN100300 K9 ............................................... C45
SKRN1203M0 K9............................................... C45
SKRN160400 K9 ............................................... C45
SKSN566K K9 ..............................................C97–99
SKSP343 K9 ................................................C46–47
SKSP453 K9 ................................................C46–47
SKTP343 K9 ...................................................... C48
SKVN343 K9 ................................................C48–49
SM819 K9 ...................................................C37–39
SM820 K9 ......................................................... C36
SM837 K9 .......................................C37, C39, C109
SM840 K9 .........................................C36–37, C108
SM841 K9 ...........................................C37–39, C65
SMAC087 WG ................................................... W39
SMAC200 WG ................................................... W41
SMYE3 K9.....................................F70–72, F74, F77
SMYE4 K9.....................................F70–72, F74, F77
SMYE5 K9.................................................... F70–72
SMYI3 K9 ......................................F70–72, F74, F77
SMYI4 K9 ......................................F70–72, F74, F77
SMYI5 K9 ..............................................F71–72, F74
SN3TPKG ............................................................F77
SNGA120404S01025MT WBH25P .................. B211
SNGA120408S01025MT WBH10U .................. B211
SNGA120408S01025MT WBH25P .................. B211
SNGA120408T02020 CW2015 ....................... B189
SNGA120408T02020 CW5025 ....................... B189
SNGA120412S01025MT WBH10U .................. B211
SNGA120412S01025MT WBH25P .................. B211
SNGA120412T02020 CW2015 ....................... B189
SNGA120412T02020 CW5025 ....................... B189
SNGA120416T02020 CW2015 ....................... B189
SNGA120416T02020 CW5025 ....................... B189
SNGA150612T02020 CW5025 ....................... B189
SNGA150616T02020 CW5025 ....................... B189
SNGG120408FS WS10PT .................................. B70
SNGG120408FS WU10HT .................................. B70
SNGN090308T02020 CW2015 ....................... B187
SNGN090412T00515 CW2015 ....................... B187
SNGN120408T00520 CW2015 ....................... B187
SNGN120408T02020 CW2015 ....................... B187
SNGN120408T02020 CW5025 ....................... B187
SNGN120412T01020 CW3020 ....................... B187
SNGN120412T02020 CW2015 ....................... B187
SNGN120412T02020 CW5025 ....................... B187
SNGN120416T01020 CW3020 ....................... B187
SNGN120416T02020 CW5025 ....................... B187
SNGN120704T02020 CW2015 ....................... B187
SNGN120708T02020 CW2015 ....................... B187
SNGN120712T00520 CW2015 ....................... B187
SNGN120712T01020 CW3020 ....................... B187
SNGN120712T02020 CW2015 ....................... B188
SNGN120712T02020 CW5025 ....................... B188
SNGN120716T00520 CW2015 ....................... B188
SNGN120716T01020 CW3020 ....................... B188
SNGN120716T02020 CW5025 ....................... B188
SNGN120720T02020 CW2015 ....................... B188
SNGN120720T10015 CW2015 ....................... B188
SNGN150712T02020 CW2015 ....................... B188
SNGN150716T02020 CW2015 ....................... B188
SNGN190720K20015 CW2015 ....................... B188
SNGN190720T20015 CW2015 ....................... B188
SNGX120708T02020 CW5025 ........................ B189
SNGX120712T01020FW CW5025 ................... B190
SNGX150716T02020 CW5025 ........................ B189
SNKT1205AZER20 TN450 ................................. H54
SNKT1205AZER20 TN6540 ............................... H54
SNKT1205AZER20 TN7525 ............................... H54
SNKT1205AZER20 TN7535 ............................... H54
SNKT1205AZER20 TTI25 ................................... H54
SNKT1205AZR21 THM....................................... H54
SNKT1205AZR21 TN7525 ................................. H54
SNKT1205AZR21 TTI25 ..................................... H54
SNKT1205AZR21 WK15CM ............................... H54
SNKT1205AZR31 TN25M .................................. H55
SNKT1205AZR31 TN6525 ................................. H55
SNKT1205AZR31 TN6540 ................................. H55
SNKT1205AZR31 TN7525 ................................. H55
SNKT1205AZR31 TN7535 ................................. H55
SNKT1205AZR31 WK15CM ............................... H55
SNKT1505AZR31 TN450 ................................... H59
SNKT1505AZR31 TN7525 ................................. H59
SNKT1505AZR31 TN7535 ................................. H59
SNKT1505AZR31 WK15CM ............................... H59
SNKT1505AZR31 WP25PM ............................... H59
SNKT1505AZR31 WP35CM ............................... H59
SNKT1505AZR31 WP40PM ............................... H59
SNMA120408 HK1500 ...................................... B71
SNMA120408 THM ............................................ B71
SNMA120408 TN20K ...................................... B134
SNMA120408 WK05CT ..................................... B71
SNMA120408 WK20CT ..................................... B71
SNMA120408S02020 WBK40U ....................... B212
SNMA120412 HK1500 ...................................... B71
SNMA120412 TN20K ...................................... B134
SNMA120412 WK05CT ..................................... B71
SNMA120412 WK20CT ..................................... B71
SNMA120412S02020 WBK40U ....................... B212
SNMA120416 WK05CT ..................................... B71
SNMA120416 WK20CT ..................................... B71
SNMA150608 WK20CT ..................................... B71
SNMA150612 TN20K .............................. B71, B134
SNMA150612 WK05CT ..................................... B71
SNMA150612 WK20CT ..................................... B71
SNMA150616 WK05CT ..................................... B71
SNMA150616 WK20CT ..................................... B71
SNMA190612 TN20K .............................. B71, B134
SNMA190612 WK05CT ..................................... B71
SNMA190612 WK20CT ..................................... B71
SNMA190616 WK05CT ..................................... B71
SNMA190616 WK20CT ..................................... B71
SNMG090304FF WK20CT.................................. B72
SNMG090304FF WP15CT.................................. B72
SNMG090304FF WS10PT .................................. B72
SNMG090304ML WP15CT ................................ B72
SNMG0903082P TN10P .................................. B135
SNMG0903082P TN10U .................................. B135
SNMG0903082P TN20K .................................. B135
SNMG0903082P TN20P .................................. B135
SNMG0903086P TN10P .................................. B136
SNMG0903086P TN20P .................................. B136
SNMG090308FF WK20CT.................................. B72
SNMG090308FF WM25CT ................................. B72
SNMG090308FF WP15CT.................................. B72
SNMG090308FF WS10PT .................................. B72
SNMG090308ML WK05CT ................................ B72
SNMG090308ML WK20CT ................................ B72
SNMG090308ML WP15CT ................................ B72
SNMG090308ML WP25CT ................................ B72
SNMG1204046P TN10P .................................. B136
SNMG1204046P TN15M ................................. B136
SNMG1204046P TN20P .................................. B136
SNMG1204046P TN30M ................................. B136
SNMG120404FF WK20CT.................................. B72
SNMG120404FF WM25CT ................................. B72
SNMG120404FF WP15CT.................................. B72
SNMG120404FF WS10PT .................................. B72
SNMG120404ML WK20CT ................................ B72
SNMG120404UF WM15CT ................................ B74
SNMG120404UF WM25CT ................................ B74
SNMG120404UF WS10PT ................................. B74
SNMG120404UM WM15CT ............................... B75
SNMG120404UM WM25CT ............................... B75
SNMG120404UM WM35CT ............................... B75
SNMG1204082P TN10P .................................. B135
SNMG1204082P TN10U .................................. B135
SNMG1204082P TN15M ................................. B135
SNMG1204082P TN15U .................................. B135
SNMG1204082P TN20K .................................. B135
SNMG1204082P TN20P .................................. B135
SNMG1204084P TN15M ................................. B135
SNMG1204084P TN30M ................................. B135
SNMG1204086P TN10P .................................. B136
SNMG1204086P TN15M ................................. B136
SNMG1204086P TN20P .................................. B136
SNMG1204086P TN30M ................................. B136
SNMG1204086P TN30P .................................. B136
SNMG1204087N TN10P .................................. B137
SNMG1204087N TN20K .................................. B137
SNMG1204087N TN20P .................................. B137
SNMG120408FF WK20CT.................................. B72
SNMG120408FF WM25CT ................................. B72
SNMG120408FF WP15CT.................................. B72
SNMG120408FF WS10PT .................................. B72
SNMG120408ML WK05CT ................................ B72
SNMG120408ML WK20CT ................................ B72
SNMG120408ML WP15CT ................................ B72
SNMG120408ML WP25CT ................................ B72
SNMG120408MR WM25CT ............................... B73
SNMG120408MR WM35CT ............................... B73
SNMG120408MR WP15CT ................................ B73
SNMG120408MR WP25CT ................................ B73
SNMG120408MR WP35CT ................................ B73
SNMG120408MS WS10PT ................................ B73
SNMG120408MS WS25PT ................................ B73
SNMG120408MS WU10HT ................................ B73
SNMG120408RH WK20CT ................................. B74
SNMG120408RH WM25CT ................................ B74
SNMG120408RH WP15CT ................................. B74
SNMG120408RH WP25CT ................................. B74
SNMG120408RH WP35CT ................................. B74
SNMG120408UF WM15CT ................................ B74
SNMG120408UF WM25CT ................................ B74
SNMG120408UF WS10PT ................................. B74
SNMG120408UM WM15CT ............................... B75
SNMG120408UM WM25CT ............................... B75
SNMG120408UM WM35CT ............................... B75
SNMG120408UR WK20CT ................................. B75
SNMG120408UR WM15CT ................................ B75
SNMG120408UR WM25CT ................................ B75
SNMG120408UR WM35CT ................................ B75
SNMG120408UR WP15CT ................................. B75
SNMG120408UR WP25CT ................................. B75
SNMG120408UR WP35CT ................................. B75
SNMG1204124P TN15M ................................. B135
SNMG1204124P TN30M ................................. B135
SNMG1204126P TN10P .................................. B136
SNMG1204126P TN15M ................................. B136
SNMG1204126P TN20P .................................. B136
SNMG1204126P TN30M ................................. B136
SNMG1204126P TN30P .................................. B136
SNMG1204127N TN10P .................................. B137
SNMG1204127N TN20K .................................. B137
SNMG1204127N TN20P .................................. B137
SNMG1204127N TN30P .................................. B137
SNMG120412FF WK20CT.................................. B72
SNMG120412FF WM25CT ................................. B72
Catalogue No. Page(s) Catalogue No. Page(s) Catalogue No. Page(s)
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 112 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRANDO b 28 20153 09PM
Z113
widia.com
Index by Catalogue Number
Catalogue No. Page(s)
SNMG120412FF WP15CT.................................. B72
SNMG120412ML WK05CT ................................ B72
SNMG120412ML WK20CT ................................ B72
SNMG120412ML WP15CT ................................ B72
SNMG120412ML WP25CT ................................ B72
SNMG120412MR WM25CT ............................... B73
SNMG120412MR WM35CT ............................... B73
SNMG120412MR WP15CT ................................ B73
SNMG120412MR WP25CT ................................ B73
SNMG120412MS WS10PT ................................ B73
SNMG120412MS WS25PT ................................ B73
SNMG120412MS WU10HT ................................ B73
SNMG120412RH WK20CT ................................. B74
SNMG120412RH WM25CT ................................ B74
SNMG120412RH WP15CT ................................. B74
SNMG120412RH WP25CT ................................. B74
SNMG120412RH WP35CT ................................. B74
SNMG120412UF WM15CT ................................ B74
SNMG120412UF WM25CT ................................ B74
SNMG120412UM WM15CT ............................... B75
SNMG120412UM WM25CT ............................... B75
SNMG120412UM WM35CT ............................... B75
SNMG120412UR WK20CT ................................. B75
SNMG120412UR WM15CT ................................ B75
SNMG120412UR WM25CT ................................ B75
SNMG120412UR WM35CT ................................ B75
SNMG120412UR WP15CT ................................. B75
SNMG120412UR WP25CT ................................. B75
SNMG120412UR WP35CT ................................. B75
SNMG120412UR WS25PT ................................. B75
SNMG1204167N TN10P .................................. B137
SNMG1204167N TN20K .................................. B137
SNMG1204167N TN20P .................................. B137
SNMG1204167N TN30P .................................. B137
SNMG120416FF WM25CT ................................. B72
SNMG120416ML WK20CT ................................ B72
SNMG120416MR WM25CT ............................... B73
SNMG120416MR WM35CT ............................... B73
SNMG120416RH WK20CT ................................. B74
SNMG120416RH WM25CT ................................ B74
SNMG120416RH WP15CT ................................. B74
SNMG120416RH WP25CT ................................. B74
SNMG120416RH WP35CT ................................. B74
SNMG120416UR WK20CT ................................. B75
SNMG120416UR WM25CT ................................ B75
SNMG120416UR WM35CT ................................ B75
SNMG120416UR WP15CT ................................. B75
SNMG120416UR WS10PT ................................. B75
SNMG120416UR WS25PT ................................. B75
SNMG150608MR WM25CT ............................... B73
SNMG150608MR WM35CT ............................... B73
SNMG150608RH WK20CT ................................. B74
SNMG150608RH WM25CT ................................ B74
SNMG150608RH WP15CT ................................. B74
SNMG150608RH WP25CT ................................. B74
SNMG150608RH WP35CT ................................. B74
SNMG1506127N TN20K .................................. B137
SNMG1506127N TN20P .................................. B137
SNMG1506127N TN30P .................................. B137
SNMG150612MR WM25CT ............................... B73
SNMG150612MR WM35CT ............................... B73
SNMG150612MR WP15CT ................................ B73
SNMG150612MS WS25PT ................................ B73
SNMG150612MS WU10HT ................................ B73
SNMG150612RH WK20CT ................................. B74
SNMG150612RH WM25CT ................................ B74
SNMG150612RH WP15CT ................................. B74
SNMG150612RH WP25CT ................................. B74
SNMG150612RH WP35CT ................................. B74
SNMG150612UR WK20CT ................................. B75
SNMG150612UR WM15CT ................................ B75
SNMG150612UR WM25CT ................................ B75
SNMG150612UR WM35CT ................................ B75
SNMG150612UR WP15CT ................................. B75
SNMG150612UR WP25CT ................................. B75
SNMG150612UR WP35CT ................................. B75
SNMG150612UR WS25PT ................................. B75
SNMG1506167N TN20K .................................. B137
SNMG1506167N TN20P .................................. B137
SNMG1506167N TN30P .................................. B137
SNMG150616MR WM25CT ............................... B73
SNMG150616MR WM35CT ............................... B73
SNMG150616RH WK20CT ................................. B74
SNMG150616RH WM25CT ................................ B74
SNMG150616RH WP15CT ................................. B74
SNMG150616RH WP25CT ................................. B74
SNMG150616RH WP35CT ................................. B74
SNMG150616UR WK20CT ................................. B75
SNMG150616UR WM15CT ................................ B75
SNMG150616UR WM25CT ................................ B75
SNMG150616UR WM35CT ................................ B75
SNMG150616UR WP15CT ................................. B75
SNMG150616UR WP25CT ................................. B75
SNMG150616UR WP35CT ................................. B75
SNMG190608RH WK20CT ................................. B74
SNMG190608RH WM25CT ................................ B74
SNMG190608RH WP15CT ................................. B74
SNMG190608RH WP25CT ................................. B74
SNMG190608RH WP35CT ................................. B74
SNMG1906126P TN15M ................................. B136
SNMG1906126P TN20P .................................. B136
SNMG1906126P TN30M ................................. B136
SNMG1906126P TN30P .................................. B136
SNMG1906127N TN20K .................................. B137
SNMG1906127N TN20P .................................. B137
SNMG1906127N TN30P .................................. B137
SNMG190612MR WM25CT ............................... B73
SNMG190612MR WM35CT ............................... B73
SNMG190612MR WP15CT ................................ B73
SNMG190612MR WP25CT ................................ B73
SNMG190612MR WP35CT ................................ B73
SNMG190612MS WS10PT ................................ B73
SNMG190612MS WS25PT ................................ B73
SNMG190612RH WK20CT ................................. B74
SNMG190612RH WM25CT ................................ B74
SNMG190612RH WP15CT ................................. B74
SNMG190612RH WP25CT ................................. B74
SNMG190612RH WP35CT ................................. B74
SNMG190612UR WK20CT ................................. B75
SNMG190612UR WM25CT ................................ B75
SNMG190612UR WM35CT ................................ B75
SNMG190612UR WP15CT ................................. B75
SNMG190612UR WP25CT ................................. B75
SNMG190612UR WP35CT ................................. B75
SNMG190612UR WS25PT ................................. B75
SNMG1906166P TN30P .................................. B136
SNMG1906167N TN20K .................................. B137
SNMG1906167N TN20P .................................. B137
SNMG1906167N TN30P .................................. B137
SNMG190616MR WM25CT ............................... B73
SNMG190616MR WM35CT ............................... B73
SNMG190616MR WP15CT ................................ B73
SNMG190616RH WK20CT ................................. B74
SNMG190616RH WM25CT ................................ B74
SNMG190616RH WP15CT ................................. B74
SNMG190616RH WP25CT ................................. B74
SNMG190616RH WP35CT ................................. B74
SNMG190616UR WK20CT ................................. B75
SNMG190616UR WM15CT ................................ B75
SNMG190616UR WM25CT ................................ B75
SNMG190616UR WM35CT ................................ B75
SNMG190616UR WP15CT ................................. B75
SNMG190616UR WP25CT ................................. B75
SNMG190616UR WP35CT ................................. B75
SNMG190616UR WS25PT ................................. B75
SNMG250924 WP35CT ..................................... B71
SNMM12040865 TN7125 ................................. B76
SNMM12040865 WM25CT ............................... B76
SNMM12040865 WP25CT ................................ B76
SNMM12040865 WP35CT ................................ B76
SNMM12041265 WM25CT ............................... B76
SNMM12041265 WP25CT ................................ B76
SNMM15061665 WM25CT ............................... B76
SNMM15061665 WP25CT ................................ B76
SNMM19061265 TN7125 ................................. B76
SNMM19061265 WM25CT ............................... B76
SNMM19061265 WP15CT ................................ B76
SNMM19061265 WP25CT ................................ B76
SNMM19061265 WP35CT ................................ B76
SNMM19061665 TN7115 ................................. B76
SNMM19061665 WM25CT ............................... B76
SNMM19061665 WP15CT ................................ B76
SNMM190616SR TN7015 ................................. B76
SNMM190616SR WM25CT ............................... B76
SNMM19062465 WM25CT ............................... B76
SNMM19062465 WP25CT ................................ B76
SNMM190624SR WM25CT ............................... B76
SNMM190624SR WP15CT ................................ B76
SNMM190624SR WP25CT ................................ B76
SNMN090316S02020 WBK40U ....................... B211
SNMN120416T02020 WBK40U ....................... B211
SNMP120408 WM15CT .................................... B77
SNMP120408 WM25CT .................................... B77
SNMP120408 WM35CT .................................... B77
SNMP120408 WS10PT ...................................... B77
SNMP120408 WS25PT ...................................... B77
SNMP120412 WM15CT .................................... B77
SNMP120412 WM25CT .................................... B77
SNMP120412 WM35CT .................................... B77
SNMP120412 WS10PT ...................................... B77
SNMP120412 WS25PT ...................................... B77
SNMP150608 WM15CT .................................... B77
SNMP150608 WM25CT .................................... B77
SNMP150608 WM35CT .................................... B77
SNMP150608 WS25PT ...................................... B77
SNMP150612 WM15CT .................................... B77
SNMP150612 WM25CT .................................... B77
SNMP150612 WM35CT .................................... B77
SNMP150612 WS25PT ...................................... B77
SNMP150616 WM15CT .................................... B77
SNMP150616 WM25CT .................................... B77
SNMP150616 WM35CT .................................... B77
SNMP150616 WS25PT ...................................... B77
SNMP190616 WM15CT .................................... B77
SNMP190616 WM25CT .................................... B77
SNMP190616 WM35CT .................................... B77
SNMS120408FST WDN25U ............................. B212
SNMS120412FST WDN25U ............................. B212
SNMT1205AZR31 TN2510 ................................ H55
SNMT1205AZR31 TN6525 ................................ H55
SNMT1205AZR31 TN6540 ................................ H55
SNMT1205AZR31 TN7525 ................................ H55
SNMT1205AZR31 TN7535 ................................ H55
SNMT1205AZR31 WK15CM .............................. H55
SNMT1205AZR31 WP25PM .............................. H55
SNMT1205AZR31 WP35CM .............................. H55
SNMT1205AZR31 WP40PM .............................. H55
SNMT1505AZR31 TN450 .................................. H59
SNMT1505AZR31 TN7525 ................................ H59
SNMT1505AZR31 TN7535 ................................ H59
SNMT1505AZR31 WK15CM .............................. H59
SNMX120712T02020 CW5025 ....................... B190
SNMX120716T02020 CW5025 ....................... B190
SNMX150716T02020 CW5025 ....................... B190
SNUN120408 WK20CT ...................................... B77
SNUN120412 WK20CT ...................................... B77
SPGN090308 WK20CT ...................................... B78
SPGN090308T01020 CW2015........................ B190
SPGN120304T01020 CW2015........................ B190
SPGN120308 WK20CT ...................................... B78
SPGN120308T01020 CW2015........................ B190
SPGN120312 WK20CT ...................................... B78
SPMR090308 WK20CT ...................................... B78
SPMR090308 WP35CT ...................................... B78
SPMR120304 WK20CT ...................................... B78
SPMR120304 WP15CT ...................................... B78
SPMR120304 WP35CT ...................................... B78
SPMR120308 WK20CT ...................................... B78
SPMR120308 WP15CT ...................................... B78
SPMR120308 WP35CT ...................................... B78
SPMR120312 WK20CT ...................................... B78
SPMR120312 WP35CT ...................................... B78
SPMT09T304FP WK20CT .................................. B79
SPMT09T304FP WM25CT ................................. B79
SPMT09T304FP WP15CT .................................. B79
SPMT09T304FP WP25CT .................................. B79
SPMT09T308FP WK20CT .................................. B79
SPMT09T308FP WM25CT ................................. B79
SPMT09T308FP WP15CT .................................. B79
SPMT09T308FP WP25CT .................................. B79
SPMT09T308MP WK20CT ................................. B79
SPMT09T308MP WM15CT ................................ B79
SPMT09T308MP WP25CT ................................. B79
SPMT120408MP WK20CT ................................. B79
SPMT120408MP WP25CT ................................. B79
SPMW120408 THM ...............................................I9
SPMW120408 WK15CM........................................I9
SPNT120408 SPTM00 ...........................................I9
SPNT120408 TN7525 ...........................................I9
SPNT120408 TN7535 ...........................................I9
SPUN090308 THM ............................................. B80
SPUN120304 THM ............................................. B80
SPUN120304 WP15CT ...................................... B80
SPUN120304T00520 CW2015 ........................ B191
SPUN120308 THM ............................................. B80
SPUN120308 WK20CT ...................................... B80
SPUN120308 WP15CT ...................................... B80
SPUN120308T00520 CW2015 ........................ B191
SPUN120312 THM ............................................. B80
SPUN120312 WK20CT ...................................... B80
SPUN120312T00520 CW2015 ........................ B191
SPUN120412 THM ............................................. B80
SPUN150412 THM ............................................. B80
SPUN150412 TTR .............................................. B80
SPUN190412 THM ............................................. B80
SPUN190416 THM ............................................. B80
SPUN250620T WP15CT .................................... B80
SRDCN1616H06 WG.......................................... C45
SRDCN1616H08 WG.......................................... C45
SRDCN2020K06 WG .......................................... C45
SRDCN2020K08 WG .......................................... C45
SRDCN2020K10 WG .......................................... C45
Catalogue No. Page(s) Catalogue No. Page(s) Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 113 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRAND O b 28 2015 3 09 PM
Z114 widia.com
Index by Catalogue Number
Index
Catalogue No. Page(s)
SRDCN2525M06 WG ......................................... C45
SRDCN2525M08 WG ......................................... C45
SRDCN2525M10 WG ......................................... C45
SRDCN2525M12 WG ......................................... C45
SRDCN3225P12 WG .......................................... C45
SRDCN3225P16 WG .......................................... C45
SRGCL12CA10 WG .......................................... C119
SRGCR08CA06 WG .......................................... C119
SRGCR10CA08 WG .......................................... C119
SRS3 ...........................................................C42–49
SRS4 ...........................................C42–47, C67, C73
SRS5 ................................................................. C45
SSA3T ..........................................F70–72, F74, F77
SSA4T ..........................................F70–72, F74, F77
SSA5T ..................................................F70–72, F74
SSBCL1616H09 WG .......................................... C46
SSBCL2020K12 WG .......................................... C46
SSBCL2525M12 WG.......................................... C46
SSBCR1616H09 WG .......................................... C46
SSBCR2020K12 WG .......................................... C46
SSBCR2525M12 WG ......................................... C46
SSBM202030L WG ............................................ D21
SSBM202030R WG ........................................... D21
SSBM202035L WG ............................................ D21
SSKCL12CA12 WG .......................................... C120
SSKCR10CA09 WG .......................................... C120
SSKCR12CA12 WG .......................................... C120
SSKCR16CA12 WG .......................................... C120
SSKPL10CA09 WG........................................... C121
SSKPR10CA09 WG .......................................... C121
SSKPR12CA09 WG .......................................... C121
SSN2T ................................................F70, F74, F77
SSOM1325380R WG ......................................... D22
SSOM1325385R WG ......................................... D22
SSOM1325630R WG ......................................... D22
SSOM1325635R WG ......................................... D22
SSP025016M ..................................C8–19, C56–59
SSP025018M ..............................C9, C12, C14, C56
SSP8 ................................................................. H64
SSRCL12CA12 WG ..........................................C122
SSRCR12CA12 WG .......................................... C122
SSRPL10CA09 WG .......................................... C123
SSRPR10CA09 WG .......................................... C123
SSSCL12CA12 WG .......................................... C124
SSSCL1616H09 WG .......................................... C47
SSSCL2020K12 WG........................................... C47
SSSCL2525M12 WG .......................................... C47
SSSCR10CA09 WG .......................................... C124
SSSCR12CA12 WG .......................................... C124
SSSCR1616H09 WG .......................................... C47
SSSCR16CA12 WG .......................................... C124
SSSCR2020K12 WG .......................................... C47
SSSCR2525M12 WG ......................................... C47
SSSPL10CA09 WG........................................... C125
SSSPR10CA09 WG .......................................... C125
SSY3T...........................................F70–72, F74, F77
SSY4T...........................................F70–72, F74, F77
SSY5T K9 .............................................F70–72, F74
STBIT WG ..........................................D59, D71, D84
STCM11 .......................................................... C108
STCM37 ..................................................C102–103
STCM38 ...................C92–94, C97–103, C106–109
STCM39 .......................................................... C102
STCM4 ........................................................C36–39
STCM40 ..............................................C95, C97–99
STCM5 .............................................................. C37
STCM8 ...........C36–39, C65, C94, C97, C101, C109
STCM9 ....................... C36, C38–39, C65, C92–103
STFCL1616H16 WG ........................................... C48
STFCL2020K16 WG ........................................... C48
STFCL2525M16 WG .......................................... C48
STFCR1212F11 WG ........................................... C48
STFCR2020K16 WG ........................................... C48
STFCR2525M16 WG .......................................... C48
STFPL08CA09 WG ........................................... C126
STFPL10CA11 WG ........................................... C126
STFPL12CA16 WG ........................................... C126
STFPR08CA09 WG ........................................... C126
STFPR10CA11 WG ........................................... C126
STFPR12CA16 WG ........................................... C126
STGPL08CA09 WG .......................................... C127
STGPL10CA11 WG .......................................... C127
STGPR08CA09 WG .......................................... C127
STGPR10CA11 WG .......................................... C127
STGPR12CA16 WG .......................................... C127
STM31 WG ........................................D59, D71, D84
STTPR08CA09 WG........................................... C128
STTPR10CA11 WG........................................... C128
STTPR12CA16 WG........................................... C128
STWPL10CA11 WG .......................................... C129
STWPL12CA16 WG .......................................... C129
STWPR08CA09 WG .........................................C129
STWPR10CA11 WG .........................................C129
STWPR12CA16 WG .........................................C129
SVHBL2020K16 WG........................................... C48
SVHBL2525M16 WG .......................................... C48
SVHBL3225P16 WG........................................... C48
SVHBR2020K16 WG .......................................... C48
SVHBR2525M16 WG ......................................... C48
SVHBR3225P16 WG .......................................... C48
SVJBL1616H16 WG ........................................... C49
SVJBL2020K16 WG ........................................... C49
SVJBL2525M16 WG .......................................... C49
SVJBL3225P16 WG ........................................... C49
SVJBR1616H16 WG........................................... C49
SVJBR2020K16 WG ........................................... C49
SVJBR2525M16 WG .......................................... C49
SVJBR3225P16 WG ........................................... C49
SVVBN2020K16 WG .......................................... C49
SVVBN2525M16 WG ......................................... C49
SVVBN3225P16 WG .......................................... C49
SWSM515 ......................................................... H64
SWSM5155 ....................................................... H65
SXHX060204R20 WP20PH ................................ U17
SXHX060208R20 WP20PH ................................ U17
SXHX070304R20 WP20PH ................................ U17
SXHX070308R20 WP20PH ................................ U17
SXHX090304R20 WP20PH ................................ U17
SXHX090308R20 WP20PH ................................ U17
TBHB07S1X0 CG5 ............................................. D47
TBHB110201 CG5 ............................................. D47
TCAX1103ZZ18 TTM08 ......................................L12
TCAX1103ZZ21 THM ..........................................L12
TCAX1103ZZ21 TTM08 ......................................L12
TCAX1103ZZ26 THM ..........................................L12
TCAX1103ZZ26 TTM ..........................................L12
TCF040203ACV34 WU25CH ...............................V20
TCF040203ACV34 WU40PH ...............................V20
TCF040203ACV36 WU25CH ...............................V21
TCF040203ACV36 WU40PH ...............................V21
TCF040204APV34 WPK10CH .............................V22
TCF040204APV34 WU25CH ...............................V22
TCF040204APV34 WU40PH ...............................V22
TCF040204APV36 WU25CH ...............................V23
TCF040204APV36 WU40PH ...............................V23
TCF050204BPV34 WPK10CH .............................V22
TCF050204BPV34 WU25CH ...............................V22
TCF050204BPV34 WU40PH ...............................V22
TCF050204BPV36 WU25CH ...............................V23
TCF050204BPV36 WU40PH ...............................V23
TCF060203BCV34 WU25CH ...............................V20
TCF060203BCV34 WU40PH ...............................V20
TCF060203BCV36 WU25CH ...............................V21
TCF060203BCV36 WU40PH ...............................V21
TCF070304CCV34 WU25CH ...............................V20
TCF070304CCV34 WU40PH ...............................V20
TCF070304CCV36 WU25CH ...............................V21
TCF070304CCV36 WU40PH ...............................V21
TCF070306CPV34 WPK10CH .............................V22
TCF070306CPV34 WU25CH ...............................V22
TCF070306CPV34 WU40PH ...............................V22
TCF070306CPV36 WU25CH ...............................V23
TCF070306CPV36 WU40PH ...............................V23
TCF080308DPV34 WPK10CH .............................V22
TCF080308DPV34 WU25CH ...............................V22
TCF080308DPV34 WU40PH ...............................V22
TCF080308DPV36 WU25CH ...............................V23
TCF080308DPV36 WU40PH ...............................V23
TCF090305DCV34 WU25CH ...............................V20
TCF090305DCV34 WU40PH ...............................V20
TCF090305DCV36 WU25CH ...............................V21
TCF090305DCV36 WU40PH ...............................V21
TCF100408EPV34 WPK10CH .............................V22
TCF100408EPV34 WU25CH ...............................V22
TCF100408EPV34 WU40PH................................V22
TCF100408EPV36 WU25CH ...............................V23
TCF100408EPV36 WU40PH................................V23
TCF120405ECV34 WU25CH ...............................V20
TCF120405ECV34 WU40PH ...............................V20
TCF120405ECV36 WU25CH ...............................V21
TCF120405ECV36 WU40PH ...............................V21
TCF120412FPV34 WPK10CH .............................V22
TCF120412FPV34 WU25CH ...............................V22
TCF120412FPV34 WU40PH ................................V22
TCF120412FPV36 WU25CH ...............................V23
TCF120412FPV36 WU40PH ................................V23
TCF120R2SL20MA ...............................................V8
TCF120R3SL20MA .............................................V11
TCF120R4SL20MA .............................................V14
TCF120R5SL20MA .............................................V17
TCF125R2SL20MA ...............................................V8
TCF125R3SL20MA .............................................V11
TCF125R4SL20MA .............................................V14
TCF125R5SL20MA .............................................V17
TCF127R2SL20MA ...............................................V8
TCF127R3SL20MA .............................................V11
TCF127R4SL20MA .............................................V14
TCF127R5SL20MA .............................................V17
TCF130R2SL20MA ...............................................V8
TCF130R3SL20MA .............................................V11
TCF130R4SL20MA .............................................V14
TCF130R5SL20MA .............................................V17
TCF135R2SL20MA .......................................V8, V10
TCF135R3SL20MA .....................................V11, V13
TCF135R4SL20MA .....................................V14, V16
TCF135R5SL20MA .....................................V17, V19
TCF140R2SL25MB ...............................................V8
TCF140R3SL25MB .............................................V11
TCF140R4SL25MB .............................................V14
TCF140R5SL25MB .............................................V17
TCF145R2SL25MB ...............................................V8
TCF145R3SL25MB .............................................V11
TCF145R4SL25MB .............................................V14
TCF145R5SL25MB .............................................V17
TCF150406FCV34 WU25CH ...............................V20
TCF150406FCV34 WU40PH ...............................V20
TCF150406FCV36 WU25CH ...............................V21
TCF150406FCV36 WU40PH ...............................V21
TCF150512GPV34 WPK10CH .............................V22
TCF150512GPV34 WU25CH ...............................V22
TCF150512GPV34 WU40PH ...............................V22
TCF150512GPV36 WU25CH ...............................V23
TCF150512GPV36 WU40PH ...............................V23
TCF150R2SL25MB ...............................................V8
TCF150R3SL25MB .............................................V11
TCF150R4SL25MB .............................................V14
TCF150R5SL25MB .............................................V17
TCF155R2SL25MB ...............................................V8
TCF155R3SL25MB .............................................V11
TCF155R4SL25MB .............................................V14
TCF155R5SL25MB .............................................V17
TCF160R2SL25MB ...............................................V8
TCF160R3SL25MB .............................................V11
TCF160R4SL25MB .............................................V14
TCF160R5SL25MB .............................................V17
TCF165R2SL25MB ...............................................V8
TCF165R3SL25MB .............................................V11
TCF165R4SL25MB .............................................V14
TCF165R5SL25MB .............................................V17
TCF170R2SL25MB ...............................................V8
TCF170R3SL25MB .............................................V11
TCF170R4SL25MB .............................................V14
TCF170R5SL25MB .............................................V17
TCF175R2SL25MB ...............................................V8
TCF175R3SL25MB .............................................V11
TCF175R4SL25MB .............................................V14
TCF175R5SL25MB .............................................V17
TCF180508GCV34 WU25CH ...............................V20
TCF180508GCV34 WU40PH ...............................V20
TCF180508GCV36 WU25CH ...............................V21
TCF180508GCV36 WU40PH ...............................V21
TCF180614HPV34 WPK10CH .............................V22
TCF180614HPV34 WU25CH ...............................V22
TCF180614HPV34 WU40PH ...............................V22
TCF180614HPV36 WU25CH ...............................V23
TCF180614HPV36 WU40PH ...............................V23
TCF180R2SL25MB ...............................................V8
TCF180R3SL25MB .............................................V11
TCF180R4SL25MB .............................................V14
TCF180R5SL25MB .............................................V17
TCF185R2SL25MB .......................................V8, V10
TCF185R3SL25MB .....................................V11, V13
TCF185R4SL25MB .....................................V14, V16
TCF185R5SL25MB .....................................V17, V19
TCF190R2SL25MC ...............................................V8
TCF190R3SL25MC .............................................V11
TCF190R4SL25MC .............................................V14
TCF190R5SL25MC .............................................V17
TCF195R2SL25MC ...............................................V8
TCF195R3SL25MC .............................................V11
TCF195R4SL25MC .............................................V14
TCF195R5SL25MC .............................................V17
TCF200R2SL25MC ...............................................V8
TCF200R3SL25MC .............................................V11
TCF200R4SL25MC .............................................V14
TCF200R5SL25MC .............................................V17
TCF205R2SL25MC ...............................................V8
TCF205R3SL25MC .............................................V11
TCF205R4SL25MC .............................................V14
TCF205R5SL25MC .............................................V17
TCF210608HCV34 WU25CH ...............................V20
TCF210608HCV34 WU40PH ...............................V20
Catalogue No. Page(s) Catalogue No. Page(s) Catalogue No. Page(s)
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 114 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRANDO b 28 20153 09PM
Z115
widia.com
Index by Catalogue Number
Catalogue No. Page(s)
TCF210608HCV36 WU25CH ...............................V21
TCF210608HCV36 WU40PH ...............................V21
TCF210R2SL25MC ...............................................V8
TCF210R3SL25MC .............................................V11
TCF210R4SL25MC .............................................V14
TCF210R5SL25MC .............................................V17
TCF220R2SL25MC ...............................................V8
TCF220R3SL25MC .............................................V11
TCF220R4SL25MC .............................................V14
TCF220R5SL25MC .............................................V17
TCF225R2SL25MC ...............................................V8
TCF225R3SL25MC .............................................V11
TCF225R4SL25MC .............................................V14
TCF225R5SL25MC .............................................V17
TCF230R2SL25MC ....................................... V8, V10
TCF230R3SL25MC .....................................V11, V13
TCF230R4SL25MC .....................................V14, V16
TCF230R5SL25MC .....................................V17, V19
TCF240R2SL25MD ....................................... V8, V10
TCF240R3SL25MD .....................................V11, V13
TCF240R4SL25MD .....................................V14, V16
TCF240R5SL25MD .....................................V17, V19
TCF250R2SL32MD ...............................................V8
TCF250R3SL32MD .............................................V11
TCF250R4SL32MD .............................................V14
TCF250R5SL32MD .............................................V17
TCF260R2SL32MD ...............................................V8
TCF260R3SL32MD .............................................V11
TCF260R4SL32MD .............................................V14
TCF260R5SL32MD .............................................V17
TCF265R2SL32MD ...............................................V8
TCF265R3SL32MD .............................................V11
TCF265R4SL32MD .............................................V14
TCF265R5SL32MD .............................................V17
TCF270R2SL32MD ...............................................V8
TCF270R3SL32MD .............................................V11
TCF270R4SL32MD .............................................V14
TCF270R5SL32MD .............................................V17
TCF280R2SL32MD ...............................................V8
TCF280R3SL32MD .............................................V11
TCF280R4SL32MD .............................................V14
TCF280R5SL32MD .............................................V17
TCF290R2SL32MD ....................................... V8, V10
TCF290R3SL32MD .....................................V11, V13
TCF290R4SL32MD .....................................V14, V16
TCF290R5SL32MD .....................................V17, V19
TCF300R2SL32ME ...............................................V8
TCF300R3SL32ME .............................................V11
TCF300R4SL32ME .............................................V14
TCF300R5SL32ME .............................................V17
TCF310R2SL32ME ...............................................V8
TCF310R3SL32ME .............................................V11
TCF310R4SL32ME .............................................V14
TCF310R5SL32ME .............................................V17
TCF320R2SL32ME ........................................ V9–10
TCF320R3SL32ME ...................................... V12–13
TCF320R4SL32ME ...................................... V15–16
TCF320R5SL32ME ...................................... V18–19
TCF330R2SL40ME ...............................................V9
TCF330R3SL40ME .............................................V12
TCF330R4SL40ME .............................................V15
TCF330R5SL40ME .............................................V18
TCF340R2SL40ME ...............................................V9
TCF340R3SL40ME .............................................V12
TCF340R4SL40ME .............................................V15
TCF340R5SL40ME .............................................V18
TCF350R2SL40ME ...............................................V9
TCF350R3SL40ME .............................................V12
TCF350R4SL40ME .............................................V15
TCF350R5SL40ME .............................................V18
TCF360R2SL40ME ........................................ V9–10
TCF360R3SL40ME ...................................... V12–13
TCF360R4SL40ME ...................................... V15–16
TCF360R5SL40ME ...................................... V18–19
TCF370R2SL40MF ...............................................V9
TCF370R3SL40MF .............................................V12
TCF370R4SL40MF .............................................V15
TCF370R5SL40MF .............................................V18
TCF375R2SL40MF ...............................................V9
TCF375R3SL40MF .............................................V12
TCF375R4SL40MF .............................................V15
TCF375R5SL40MF .............................................V18
TCF380R2SL40MF ...............................................V9
TCF380R3SL40MF .............................................V12
TCF380R4SL40MF .............................................V15
TCF380R5SL40MF .............................................V18
TCF390R2SL40MF ...............................................V9
TCF390R3SL40MF .............................................V12
TCF390R4SL40MF .............................................V15
TCF390R5SL40MF .............................................V18
TCF400R2SL40MF ...............................................V9
TCF400R3SL40MF .............................................V12
TCF400R4SL40MF .............................................V15
TCF400R5SL40MF .............................................V18
TCF410R2SL40MF ...............................................V9
TCF410R3SL40MF .............................................V12
TCF410R4SL40MF .............................................V15
TCF410R5SL40MF .............................................V18
TCF420R2SL40MF ...............................................V9
TCF420R3SL40MF .............................................V12
TCF420R4SL40MF .............................................V15
TCF420R5SL40MF .............................................V18
TCF430R2SL40MF ...............................................V9
TCF430R3SL40MF .............................................V12
TCF430R4SL40MF .............................................V15
TCF430R5SL40MF .............................................V18
TCF440R2SL40MF ........................................ V9–10
TCF440R3SL40MF ...................................... V12–13
TCF440R4SL40MF ...................................... V15–16
TCF440R5SL40MF ...................................... V18–19
TCF450R2SL50MF ........................................ V9–10
TCF450R3SL50MF ...................................... V12–13
TCF450R4SL50MF ...................................... V15–16
TCF450R5SL50MF ...................................... V18–19
TCF460R2SL50MG ...............................................V9
TCF460R3SL50MG .............................................V12
TCF460R4SL50MG .............................................V15
TCF460R5SL50MG .............................................V18
TCF470R2SL50MG ...............................................V9
TCF470R3SL50MG .............................................V12
TCF470R4SL50MG .............................................V15
TCF470R5SL50MG .............................................V18
TCF480R2SL50MG ...............................................V9
TCF480R3SL50MG .............................................V12
TCF480R4SL50MG .............................................V15
TCF480R5SL50MG .............................................V18
TCF490R2SL50MG ...............................................V9
TCF490R3SL50MG .............................................V12
TCF490R4SL50MG .............................................V15
TCF490R5SL50MG .............................................V18
TCF500R2SL50MG ...............................................V9
TCF500R3SL50MG .............................................V12
TCF500R4SL50MG .............................................V15
TCF500R5SL50MG .............................................V18
TCF505R2SL50MG ...............................................V9
TCF505R3SL50MG .............................................V12
TCF505R4SL50MG .............................................V15
TCF505R5SL50MG .............................................V18
TCF510R2SL50MG ...............................................V9
TCF510R3SL50MG .............................................V12
TCF510R4SL50MG .............................................V15
TCF510R5SL50MG .............................................V18
TCF520R2SL50MG ...............................................V9
TCF520R3SL50MG .............................................V12
TCF520R4SL50MG .............................................V15
TCF520R5SL50MG .............................................V18
TCF530R2SL50MG ...............................................V9
TCF530R3SL50MG .............................................V12
TCF530R4SL50MG .............................................V15
TCF530R5SL50MG .............................................V18
TCF540R2SL50MG ...............................................V9
TCF540R3SL50MG .............................................V12
TCF540R4SL50MG .............................................V15
TCF540R5SL50MG .............................................V18
TCF550R2SL50MG ...............................................V9
TCF550R3SL50MG .............................................V12
TCF550R4SL50MG .............................................V15
TCF550R5SL50MG .............................................V18
TCF560R2SL50MG ........................................ V9–10
TCF560R3SL50MG ...................................... V12–13
TCF560R4SL50MG ...................................... V15–16
TCF560R5SL50MG ...................................... V18–19
TCF570R2SL50MH ...............................................V9
TCF570R3SL50MH .............................................V12
TCF570R4SL50MH .............................................V15
TCF570R5SL50MH .............................................V18
TCF580R2SL50MH ...............................................V9
TCF580R3SL50MH .............................................V12
TCF580R4SL50MH .............................................V15
TCF580R5SL50MH .............................................V18
TCF590R2SL50MH ...............................................V9
TCF590R3SL50MH .............................................V12
TCF590R4SL50MH .............................................V15
TCF590R5SL50MH .............................................V18
TCF600R2SL50MH ...............................................V9
TCF600R3SL50MH .............................................V12
TCF600R4SL50MH .............................................V15
TCF600R5SL50MH .............................................V18
TCF610R2SL50MH ...............................................V9
TCF610R3SL50MH .............................................V12
TCF610R4SL50MH .............................................V15
TCF610R5SL50MH .............................................V18
TCF620R2SL50MH ...............................................V9
TCF620R3SL50MH .............................................V12
TCF620R4SL50MH .............................................V15
TCF620R5SL50MH .............................................V18
TCF630R2SL50MH ...............................................V9
TCF630R3SL50MH .............................................V12
TCF630R4SL50MH .............................................V15
TCF630R5SL50MH .............................................V18
TCF640R2SL50MH ...............................................V9
TCF640R3SL50MH .............................................V12
TCF640R4SL50MH .............................................V15
TCF640R5SL50MH .............................................V18
TCF650R2SL50MH ...............................................V9
TCF650R3SL50MH .............................................V12
TCF650R4SL50MH .............................................V15
TCF650R5SL50MH .............................................V18
TCF660R2SL50MH ...............................................V9
TCF660R3SL50MH .............................................V12
TCF660R4SL50MH .............................................V15
TCF660R5SL50MH .............................................V18
TCF670R2SL50MH ...............................................V9
TCF670R3SL50MH .............................................V12
TCF670R4SL50MH .............................................V15
TCF670R5SL50MH .............................................V18
TCF680R2SL50MH ........................................ V9–10
TCF680R3SL50MH ...................................... V12–13
TCF680R4SL50MH ...................................... V15–16
TCF680R5SL50MH ...................................... V18–19
TCGT1102011P TN10U ................................... B138
TCGT1102011P TN15U ................................... B138
TCGT1102041P TN10U ................................... B138
TCGT1102041P TN15U ................................... B138
TCGT110204AL1 HWK10 ................................ B157
TCGT16T3021P TN10U ................................... B138
TCGT16T3041P TN10U ................................... B138
TCGT16T3041P TN15U ................................... B138
TCGT16T3081P TN10U ................................... B138
TCGT16T308AL1 HWK10 ................................ B157
TCGW110202EC WBH25P ............................... B212
TCGW110204FST WDN25U ............................. B213
TCGW110204S01015C WBH10U .................... B212
TCGW110204S01015C WBH25P .................... B212
TCGW16T304FST WDN25U ............................. B213
TCMT110202 THM ............................................ B81
TCMT1102021P TN10P ................................... B139
TCMT1102021P TN10U ................................... B139
TCMT1102021P TN20K ................................... B139
TCMT110202FP WM25CT ................................. B82
TCMT110204 THM ............................................ B81
TCMT110204 TTR ............................................. B81
TCMT1102041P TN10P ................................... B139
TCMT1102041P TN10U ................................... B139
TCMT1102041P TN15M .................................. B139
TCMT1102041P TN20K ................................... B139
TCMT1102041P TN20P ................................... B139
TCMT1102041P TN30M .................................. B139
TCMT1102042 TTI15......................................... B81
TCMT110204FP WK20CT .................................. B82
TCMT110204FP WM15CT ................................. B82
TCMT110204FP WM25CT ................................. B82
TCMT110204FP WP15CT .................................. B82
TCMT110204FP WP25CT .................................. B82
TCMT1102081P TN10P ................................... B139
TCMT1102081P TN10U ................................... B139
TCMT1102081P TN20K ................................... B139
TCMT1102081P TN20P ................................... B139
TCMT110208FP WK20CT .................................. B82
TCMT110208FP WM15CT ................................. B82
TCMT110208FP WM25CT ................................. B82
TCMT110208FP WP15CT .................................. B82
TCMT110208FP WP25CT .................................. B82
TCMT110208MP WK20CT ................................. B82
TCMT110208MP WP25CT ................................. B82
TCMT16T3021P TN10U ................................... B139
TCMT16T304 THM ............................................ B81
TCMT16T3041P TN10P ................................... B139
TCMT16T3041P TN10U ................................... B139
TCMT16T3041P TN15M .................................. B139
TCMT16T3041P TN20K ................................... B139
TCMT16T3041P TN20P ................................... B139
TCMT16T3041P TN30M .................................. B139
TCMT16T304FP WK20CT .................................. B82
TCMT16T304FP WM15CT ................................. B82
TCMT16T304FP WM25CT ................................. B82
TCMT16T304FP WP15CT .................................. B82
TCMT16T304FP WP25CT .................................. B82
TCMT16T304MP WK20CT ................................. B82
TCMT16T304MP WM15CT ................................ B82
TCMT16T304MP WM25CT ................................ B82
TCMT16T304MP WP25CT ................................. B82
Catalogue No. Page(s) Catalogue No. Page(s) Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 115 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRAND O b 28 2015 3 09 PM
Z116 widia.com
Index by Catalogue Number
Index
Catalogue No. Page(s)
TCMT16T304MU TN7115 .................................. B83
TCMT16T304MU WK20CT ................................. B83
TCMT16T304MU WM25CT ................................ B83
TCMT16T304MU WP15CT ................................. B83
TCMT16T304MU WP25CT ................................. B83
TCMT16T304MU WS25PT ................................. B83
TCMT16T308 THM ............................................ B81
TCMT16T308 TTR ............................................. B81
TCMT16T3081P TN10P ................................... B139
TCMT16T3081P TN10U ................................... B139
TCMT16T3081P TN15M .................................. B139
TCMT16T3081P TN20K ................................... B139
TCMT16T3081P TN20P ................................... B139
TCMT16T3081P TN30M .................................. B139
TCMT16T308FP WK20CT .................................. B82
TCMT16T308FP WM15CT ................................. B82
TCMT16T308FP WM25CT ................................. B82
TCMT16T308FP WP15CT .................................. B82
TCMT16T308FP WP25CT .................................. B82
TCMT16T308MP WK20CT ................................. B82
TCMT16T308MP WM15CT ................................ B82
TCMT16T308MP WM25CT ................................ B82
TCMT16T308MP WP15CT ................................. B82
TCMT16T308MP WP25CT ................................. B82
TCMT16T308MU TN5105 .................................. B83
TCMT16T308MU WK20CT ................................. B83
TCMT16T308MU WM25CT ................................ B83
TCMT16T308MU WP15CT ................................. B83
TCMT16T308MU WP25CT ................................. B83
TCMT16T308MU WS10PT ................................. B83
TCMT16T3121P TN10U ................................... B139
TCMT16T312FP WK20CT .................................. B82
TCMT16T312FP WM25CT ................................. B82
TCMT16T312FP WP15CT .................................. B82
TCMT16T312MP WK20CT ................................. B82
TCMT16T312MP WM25CT ................................ B82
TCMT16T312MP WP25CT ................................. B82
TCMT220408 THM ............................................ B81
TCMT2204081P TN10P ................................... B139
TCMT2204081P TN10U ................................... B139
TCMT2204081P TN15M .................................. B139
TCMT2204081P TN20K ................................... B139
TCMT2204081P TN20P ................................... B139
TCMT2204081P TN30M .................................. B139
TCMT220408FP WK20CT .................................. B82
TCMT220408FP WM25CT ................................. B82
TCMT220408FP WP15CT .................................. B82
TCMT220408FP WP25CT .................................. B82
TCMW110204 THM ........................................... B83
TCMW110204 WK05CT ..................................... B83
TCMW110204 WK20CT ..................................... B83
TCMW110204FST WBK45U ............................. B213
TCMW110204FST WDN25U ............................ B213
TCMW16T304 THM ........................................... B83
TCMW16T304 WK05CT ..................................... B83
TCMW16T304 WK20CT ..................................... B83
TDD105Z03000 WU20PD .................................T106
TDD105Z03175 WU20PD .................................T106
TDD105Z03500 WU20PD .................................T106
TDD105Z03571 WU20PD .................................T106
TDD105Z03800 WU20PD .................................T106
TDD105Z03970 WU20PD .................................T106
TDD105Z04000 WU20PD .................................T106
TDD105Z04039 WU20PD .................................T106
TDD105Z04300 WU20PD .................................T106
TDD105Z04500 WU20PD .................................T106
TDD105Z04623 WU20PD .................................T106
TDD105Z04763 WU20PD .................................T106
TDD105Z05000 WU20PD .................................T106
TDD105Z05159 WU20PD .................................T106
TDD105Z05410 WU20PD .................................T106
TDD105Z05500 WU20PD .................................T106
TDD105Z05558 WU20PD .................................T106
TDD105Z05800 WU20PD .................................T106
TDD105Z06000 WU20PD .................................T106
TDD105Z06200 WU20PD .................................T106
TDD105Z06350 WU20PD .................................T106
TDD105Z06500 WU20PD .................................T106
TDD105Z06528 WU20PD .................................T106
TDD105Z06746 WU20PD .................................T106
TDD105Z06800 WU20PD .................................T107
TDD105Z06909 WU20PD .................................T107
TDD105Z07000 WU20PD .................................T107
TDD105Z07145 WU20PD .................................T107
TDD105Z07500 WU20PD .................................T107
TDD105Z07541 WU20PD .................................T107
TDD105Z07938 WU20PD .................................T107
TDD105Z08000 WU20PD .................................T107
TDD105Z08334 WU20PD .................................T107
TDD105Z08433 WU20PD .................................T107
TDD105Z08500 WU20PD .................................T107
TDD105Z08733 WU20PD .................................T107
TDD105Z09000 WU20PD .................................T107
TDD105Z09347 WU20PD .................................T107
TDD105Z09500 WU20PD .................................T107
TDD105Z09525 WU20PD .................................T107
TDD105Z09750 WU20PD .................................T107
TDD105Z10000 WU20PD .................................T107
TDD105Z10200 WU20PD .................................T107
TDD105Z10320 WU20PD .................................T107
TDD105Z10500 WU20PD .................................T107
TDD105Z10716 WU20PD .................................T107
TDD105Z11000 WU20PD .................................T107
TDD105Z11113 WU20PD .................................T107
TDD105Z11500 WU20PD .................................T107
TDD105Z12000 WU20PD .................................T107
TDD105Z12304 WU20PD .................................T107
TDD105Z12500 WU20PD .................................T107
TDD105Z12700 WU20PD .................................T107
TDD105Z13000 WU20PD .................................T107
TDD106Z03000 WU20PD .................................T108
TDD106Z03175 WU20PD .................................T108
TDD106Z03500 WU20PD .................................T108
TDD106Z03571 WU20PD .................................T108
TDD106Z03800 WU20PD .................................T108
TDD106Z03970 WU20PD .................................T108
TDD106Z04000 WU20PD .................................T108
TDD106Z04039 WU20PD .................................T108
TDD106Z04300 WU20PD .................................T108
TDD106Z04500 WU20PD .................................T108
TDD106Z04623 WU20PD .................................T108
TDD106Z04763 WU20PD .................................T108
TDD106Z05000 WU20PD .................................T108
TDD106Z05159 WU20PD .................................T108
TDD106Z05410 WU20PD .................................T108
TDD106Z05500 WU20PD .................................T108
TDD106Z05558 WU20PD .................................T108
TDD106Z05800 WU20PD .................................T108
TDD106Z06000 WU20PD .................................T108
TDD106Z06200 WU20PD .................................T108
TDD106Z06350 WU20PD .................................T108
TDD106Z06500 WU20PD .................................T108
TDD106Z06528 WU20PD .................................T108
TDD106Z06746 WU20PD .................................T108
TDD106Z06800 WU20PD .................................T109
TDD106Z06909 WU20PD .................................T109
TDD106Z07000 WU20PD .................................T109
TDD106Z07145 WU20PD .................................T109
TDD106Z07500 WU20PD .................................T107
TDD106Z07541 WU20PD .................................T109
TDD106Z07938 WU20PD .................................T109
TDD106Z08000 WU20PD .................................T109
TDD106Z08334 WU20PD .................................T109
TDD106Z08433 WU20PD .................................T109
TDD106Z08500 WU20PD .................................T109
TDD106Z08733 WU20PD .................................T109
TDD106Z09000 WU20PD .................................T109
TDD106Z09347 WU20PD .................................T109
TDD106Z09500 WU20PD .................................T109
TDD106Z09525 WU20PD .................................T109
TDD106Z09750 WU20PD .................................T109
TDD106Z09921 WU20PD .................................T109
TDD106Z10000 WU20PD .................................T109
TDD106Z10200 WU20PD .................................T109
TDD106Z10320 WU20PD .................................T109
TDD106Z10500 WU20PD .................................T109
TDD106Z10716 WU20PD .................................T109
TDD106Z11000 WU20PD .................................T109
TDD106Z11113 WU20PD .................................T109
TDD106Z11500 WU20PD .................................T109
TDD106Z12000 WU20PD .................................T109
TDD106Z12500 WU20PD .................................T109
TDD106Z12700 WU20PD .................................T109
TDD106Z13000 WU20PD .................................T109
TDD107Z03000 WU20PD .................................T110
TDD107Z03175 WU20PD .................................T110
TDD107Z03500 WU20PD .................................T110
TDD107Z03800 WU20PD .................................T110
TDD107Z03970 WU20PD .................................T110
TDD107Z04000 WU20PD .................................T110
TDD107Z04039 WU20PD .................................T110
TDD107Z04500 WU20PD .................................T110
TDD107Z04763 WU20PD .................................T110
TDD107Z05000 WU20PD .................................T110
TDD107Z05500 WU20PD .................................T110
TDD107Z05558 WU20PD .................................T110
TDD107Z05800 WU20PD .................................T110
TDD107Z06000 WU20PD .................................T110
TDD107Z06350 WU20PD .................................T110
TDD107Z06500 WU20PD .................................T110
TDD107Z06528 WU20PD .................................T110
TDD107Z06746 WU20PD .................................T110
TDD107Z06909 WU20PD .................................T110
TDD107Z07000 WU20PD .................................T110
TDD107Z07541 WU20PD .................................T110
TDD107Z07938 WU20PD .................................T110
TDD107Z08000 WU20PD .................................T110
TDD107Z08433 WU20PD .................................T110
TDD107Z08500 WU20PD .................................T111
TDD107Z08733 WU20PD .................................T111
TDD107Z09000 WU20PD .................................T111
TDD107Z09347 WU20PD .................................T111
TDD107Z09500 WU20PD .................................T111
TDD107Z09525 WU20PD .................................T111
TDD107Z10000 WU20PD .................................T111
TDD107Z10300 WU20PD .................................T111
TDD107Z10320 WU20PD .................................T111
TDD107Z10500 WU20PD .................................T111
TDD107Z10716 WU20PD .................................T111
TDD107Z11000 WU20PD .................................T111
TDD107Z11113 WU20PD .................................T111
TDD107Z11500 WU20PD .................................T111
TDD107Z12000 WU20PD .................................T111
TDD107Z12500 WU20PD .................................T111
TDD107Z12700 WU20PD .................................T111
TDD107Z13000 WU20PD .................................T111
TDD108Z03000 WU20PD .................................T112
TDD108Z03175 WU20PD .................................T112
TDD108Z03500 WU20PD .................................T112
TDD108Z03571 WU20PD .................................T112
TDD108Z03800 WU20PD .................................T112
TDD108Z03970 WU20PD .................................T112
TDD108Z04000 WU20PD .................................T112
TDD108Z04039 WU20PD .................................T112
TDD108Z04300 WU20PD .................................T112
TDD108Z04500 WU20PD .................................T112
TDD108Z04623 WU20PD .................................T112
TDD108Z04763 WU20PD .................................T112
TDD108Z05000 WU20PD .................................T112
TDD108Z05159 WU20PD .................................T112
TDD108Z05410 WU20PD .................................T112
TDD108Z05500 WU20PD .................................T112
TDD108Z05558 WU20PD .................................T112
TDD108Z05800 WU20PD .................................T112
TDD108Z06000 WU20PD .................................T112
TDD108Z06200 WU20PD .................................T112
TDD108Z06350 WU20PD .................................T112
TDD108Z06500 WU20PD .................................T112
TDD108Z06528 WU20PD .................................T112
TDD108Z06746 WU20PD .................................T112
TDD108Z06800 WU20PD .................................T113
TDD108Z06909 WU20PD .................................T113
TDD108Z07000 WU20PD .................................T113
TDD108Z07145 WU20PD .................................T113
TDD108Z07500 WU20PD .................................T113
TDD108Z07938 WU20PD .................................T113
TDD108Z08000 WU20PD .................................T113
TDD108Z08334 WU20PD .................................T113
TDD108Z08500 WU20PD .................................T113
TDD108Z08733 WU20PD .................................T113
TDD108Z09000 WU20PD .................................T113
TDD108Z09500 WU20PD .................................T113
TDD108Z09525 WU20PD .................................T113
TDD108Z09750 WU20PD .................................T113
TDD108Z10000 WU20PD .................................T113
TDD108Z10200 WU20PD .................................T113
TDD108Z10320 WU20PD .................................T113
TDD108Z10500 WU20PD .................................T113
TDD108Z11000 WU20PD .................................T113
TDD108Z11113 WU20PD .................................T113
TDD108Z11500 WU20PD .................................T113
TDD108Z12000 WU20PD .................................T113
TDD108Z12304 WU20PD .................................T113
TDD108Z12500 WU20PD .................................T113
TDD108Z12700 WU20PD .................................T113
TDD108Z13000 WU20PD .................................T113
TDG532A03000 WN10HD ................................T120
TDG532A03048 WN10HD ................................T120
TDG532A03100 WN10HD ................................T120
TDG532A03175 WN10HD ................................T120
TDG532A03200 WN10HD ................................T120
TDG532A03264 WN10HD ................................T120
TDG532A03300 WN10HD ................................T120
TDG532A03400 WN10HD ................................T120
TDG532A03455 WN10HD ................................T120
TDG532A03500 WN10HD ................................T120
TDG532A03571 WN10HD ................................T120
TDG532A03600 WN10HD ................................T120
TDG532A03658 WN10HD ................................T120
TDG532A03700 WN10HD ................................T120
TDG532A03734 WN10HD ................................T120
TDG532A03800 WN10HD ................................T120
Catalogue No. Page(s) Catalogue No. Page(s) Catalogue No. Page(s)
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 116 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRANDO b 28 20153 09PM
Z117
widia.com
Index by Catalogue Number
Catalogue No. Page(s)
TDG532A03900 WN10HD ................................T120
TDG532A03970 WN10HD ................................T120
TDG532A04000 WN10HD ................................T120
TDG532A04039 WN10HD ................................T120
TDG532A04090 WN10HD ................................T120
TDG532A04100 WN10HD ................................T120
TDG532A04200 WN10HD ................................T120
TDG532A04217 WN10HD ................................T120
TDG532A04300 WN10HD ................................T121
TDG532A04366 WN10HD ................................T121
TDG532A04400 WN10HD ................................T121
TDG532A04500 WN10HD ................................T121
TDG532A04600 WN10HD ................................T121
TDG532A04623 WN10HD ................................T121
TDG532A04700 WN10HD ................................T121
TDG532A04763 WN10HD ................................T121
TDG532A04800 WN10HD ................................T121
TDG532A04852 WN10HD ................................T121
TDG532A04900 WN10HD ................................T121
TDG532A05000 WN10HD ................................T121
TDG532A05100 WN10HD ................................T121
TDG532A05106 WN10HD ................................T121
TDG532A05159 WN10HD ................................T121
TDG532A05200 WN10HD ................................T121
TDG532A05300 WN10HD ................................T121
TDG532A05400 WN10HD ................................T121
TDG532A05410 WN10HD ................................T121
TDG532A05500 WN10HD ................................T121
TDG532A05558 WN10HD ................................T121
TDG532A05600 WN10HD ................................T121
TDG532A05616 WN10HD ................................T121
TDG532A05700 WN10HD ................................T121
TDG532A05800 WN10HD ................................T121
TDG532A05900 WN10HD ................................T121
TDG532A05954 WN10HD ................................T121
TDG532A06000 WN10HD ................................T121
TDG532A06100 WN10HD ................................T121
TDG532A06200 WN10HD ................................T121
TDG532A06300 WN10HD ................................T121
TDG532A06350 WN10HD ................................T121
TDG532A06400 WN10HD ................................T121
TDG532A06500 WN10HD ................................T121
TDG532A06528 WN10HD ................................T121
TDG532A06600 WN10HD ................................T121
TDG532A06630 WN10HD ................................T121
TDG532A06700 WN10HD ................................T121
TDG532A06746 WN10HD ................................T121
TDG532A06800 WN10HD ................................T121
TDG532A06900 WN10HD ................................T122
TDG532A07000 WN10HD ................................T122
TDG532A07100 WN10HD ................................T122
TDG532A07145 WN10HD ................................T122
TDG532A07200 WN10HD ................................T122
TDG532A07300 WN10HD ................................T122
TDG532A07400 WN10HD ................................T122
TDG532A07500 WN10HD ................................T122
TDG532A07541 WN10HD ................................T122
TDG532A07600 WN10HD ................................T122
TDG532A07700 WN10HD ................................T122
TDG532A07800 WN10HD ................................T122
TDG532A07900 WN10HD ................................T122
TDG532A07938 WN10HD ................................T122
TDG532A08000 WN10HD ................................T122
TDG532A08100 WN10HD ................................T122
TDG532A08200 WN10HD ................................T122
TDG532A08300 WN10HD ................................T122
TDG532A08334 WN10HD ................................T122
TDG532A08400 WN10HD ................................T122
TDG532A08433 WN10HD ................................T122
TDG532A08500 WN10HD ................................T122
TDG532A08600 WN10HD ................................T122
TDG532A08700 WN10HD ................................T122
TDG532A08733 WN10HD ................................T122
TDG532A08800 WN10HD ................................T122
TDG532A08900 WN10HD ................................T122
TDG532A09000 WN10HD ................................T122
TDG532A09100 WN10HD ................................T122
TDG532A09129 WN10HD ................................T122
TDG532A09200 WN10HD ................................T122
TDG532A09300 WN10HD ................................T122
TDG532A09347 WN10HD ................................T122
TDG532A09400 WN10HD ................................T122
TDG532A09500 WN10HD ................................T122
TDG532A09525 WN10HD ................................T122
TDG532A09600 WN10HD ................................T122
TDG532A09700 WN10HD ................................T122
TDG532A09800 WN10HD ................................T122
TDG532A09900 WN10HD ................................T122
TDG532A09921 WN10HD ................................T123
TDG532A10000 WN10HD ................................T123
TDG532A10100 WN10HD ................................T123
TDG532A10200 WN10HD ................................T123
TDG532A10300 WN10HD ................................T123
TDG532A10320 WN10HD ................................T123
TDG532A10400 WN10HD ................................T123
TDG532A10500 WN10HD ................................T123
TDG532A10600 WN10HD ................................T123
TDG532A10700 WN10HD ................................T123
TDG532A10716 WN10HD ................................T123
TDG532A10800 WN10HD ................................T123
TDG532A10900 WN10HD ................................T123
TDG532A11000 WN10HD ................................T123
TDG532A11100 WN10HD ................................T123
TDG532A11113 WN10HD ................................T123
TDG532A11200 WN10HD ................................T123
TDG532A11300 WN10HD ................................T123
TDG532A11400 WN10HD ................................T123
TDG532A11500 WN10HD ................................T123
TDG532A11509 WN10HD ................................T123
TDG532A11600 WN10HD ................................T123
TDG532A11700 WN10HD ................................T123
TDG532A11800 WN10HD ................................T123
TDG532A11900 WN10HD ................................T123
TDG532A11908 WN10HD ................................T123
TDG532A12000 WN10HD ................................T123
TDG532A12100 WN10HD ................................T123
TDG532A12200 WN10HD ................................T123
TDG532A12300 WN10HD ................................T123
TDG532A12304 WN10HD ................................T123
TDG532A12400 WN10HD ................................T123
TDG532A12500 WN10HD ................................T123
TDG532A12600 WN10HD ................................T123
TDG532A12700 WN10HD ................................T123
TDG532A12800 WN10HD ................................T123
TDG532A12900 WN10HD ................................T123
TDG532A13000 WN10HD ................................T123
TDG532A13096 WN10HD ................................T123
TDG532A13100 WN10HD ................................T123
TDG532A13200 WN10HD ................................T124
TDG532A13300 WN10HD ................................T124
TDG532A13400 WN10HD ................................T124
TDG532A13490 WN10HD ................................T124
TDG532A13500 WN10HD ................................T124
TDG532A13600 WN10HD ................................T124
TDG532A13700 WN10HD ................................T124
TDG532A13800 WN10HD ................................T124
TDG532A13891 WN10HD ................................T124
TDG532A13900 WN10HD ................................T124
TDG532A14000 WN10HD ................................T124
TDG532A14100 WN10HD ................................T124
TDG532A14200 WN10HD ................................T124
TDG532A14288 WN10HD ................................T124
TDG532A14300 WN10HD ................................T124
TDG532A14400 WN10HD ................................T124
TDG532A14500 WN10HD ................................T124
TDG532A14600 WN10HD ................................T124
TDG532A14684 WN10HD ................................T124
TDG532A14700 WN10HD ................................T124
TDG532A14800 WN10HD ................................T124
TDG532A14900 WN10HD ................................T124
TDG532A15000 WN10HD ................................T124
TDG532A15083 WN10HD ................................T124
TDG532A15100 WN10HD ................................T124
TDG532A15200 WN10HD ................................T124
TDG532A15300 WN10HD ................................T124
TDG532A15400 WN10HD ................................T124
TDG532A15479 WN10HD ................................T124
TDG532A15500 WN10HD ................................T124
TDG532A15600 WN10HD ................................T124
TDG532A15700 WN10HD ................................T124
TDG532A15800 WN10HD ................................T124
TDG532A15875 WN10HD ................................T124
TDG532A15900 WN10HD ................................T124
TDG532A16000 WN10HD ................................T124
TDG532A16100 WN10HD ................................T124
TDG532A16200 WN10HD ................................T124
TDG532A16271 WN10HD ................................T124
TDG532A16300 WN10HD ................................T124
TDG532A16400 WN10HD ................................T125
TDG532A16500 WN10HD ................................T125
TDG532A16600 WN10HD ................................T125
TDG532A16670 WN10HD ................................T125
TDG532A16700 WN10HD ................................T125
TDG532A16800 WN10HD ................................T125
TDG532A16900 WN10HD ................................T125
TDG532A17000 WN10HD ................................T125
TDG532A17100 WN10HD ................................T125
TDG532A17200 WN10HD ................................T125
TDG532A17300 WN10HD ................................T125
TDG532A17400 WN10HD ................................T125
TDG532A17463 WN10HD ................................T125
TDG532A17500 WN10HD ................................T125
TDG532A17600 WN10HD ................................T125
TDG532A17700 WN10HD ................................T125
TDG532A17800 WN10HD ................................T125
TDG532A17859 WN10HD ................................T125
TDG532A17900 WN10HD ................................T125
TDG532A18000 WN10HD ................................T125
TDG532A18100 WN10HD ................................T125
TDG532A18200 WN10HD ................................T125
TDG532A18258 WN10HD ................................T125
TDG532A18300 WN10HD ................................T125
TDG532A18400 WN10HD ................................T125
TDG532A18500 WN10HD ................................T125
TDG532A18600 WN10HD ................................T125
TDG532A18654 WN10HD ................................T125
TDG532A18700 WN10HD ................................T125
TDG532A18800 WN10HD ................................T125
TDG532A18900 WN10HD ................................T125
TDG532A19000 WN10HD ................................T125
TDG532A19050 WN10HD ................................T125
TDG532A19100 WN10HD ................................T125
TDG532A19200 WN10HD ................................T125
TDG532A19300 WN10HD ................................T125
TDG532A19400 WN10HD ................................T125
TDG532A19500 WN10HD ................................T125
TDG532A19600 WN10HD ................................T125
TDG532A19700 WN10HD ................................T125
TDG532A19800 WN10HD ................................T126
TDG532A19900 WN10HD ................................T126
TDG532A20000 WN10HD ................................T126
TDG532A21000 WN10HD ................................T126
TDG532A22000 WN10HD ................................T126
TDG532A23000 WN10HD ................................T126
TDG533A03000 WN10HD ................................T127
TDG533A03048 WN10HD ................................T127
TDG533A03100 WN10HD ................................T127
TDG533A03175 WN10HD ................................T127
TDG533A03200 WN10HD ................................T127
TDG533A03264 WN10HD ................................T127
TDG533A03300 WN10HD ................................T127
TDG533A03400 WN10HD ................................T127
TDG533A03455 WN10HD ................................T127
TDG533A03500 WN10HD ................................T127
TDG533A03571 WN10HD ................................T127
TDG533A03600 WN10HD ................................T127
TDG533A03658 WN10HD ................................T127
TDG533A03700 WN10HD ................................T127
TDG533A03734 WN10HD ................................T127
TDG533A03800 WN10HD ................................T127
TDG533A03900 WN10HD ................................T127
TDG533A03970 WN10HD ................................T127
TDG533A04000 WN10HD ................................T127
TDG533A04039 WN10HD ................................T127
TDG533A04090 WN10HD ................................T127
TDG533A04100 WN10HD ................................T127
TDG533A04200 WN10HD ................................T127
TDG533A04217 WN10HD ................................T127
TDG533A04300 WN10HD ................................T128
TDG533A04366 WN10HD ................................T128
TDG533A04400 WN10HD ................................T128
TDG533A04500 WN10HD ................................T128
TDG533A04600 WN10HD ................................T128
TDG533A04623 WN10HD ................................T128
TDG533A04700 WN10HD ................................T128
TDG533A04763 WN10HD ................................T128
TDG533A04800 WN10HD ................................T128
TDG533A04852 WN10HD ................................T128
TDG533A04900 WN10HD ................................T128
TDG533A05000 WN10HD ................................T128
TDG533A05100 WN10HD ................................T128
TDG533A05106 WN10HD ................................T128
TDG533A05159 WN10HD ................................T128
TDG533A05200 WN10HD ................................T128
TDG533A05300 WN10HD ................................T128
TDG533A05400 WN10HD ................................T128
TDG533A05410 WN10HD ................................T128
TDG533A05500 WN10HD ................................T128
TDG533A05558 WN10HD ................................T128
TDG533A05600 WN10HD ................................T128
TDG533A05616 WN10HD ................................T128
TDG533A05700 WN10HD ................................T128
TDG533A05800 WN10HD ................................T128
TDG533A05900 WN10HD ................................T128
TDG533A05954 WN10HD ................................T128
TDG533A06000 WN10HD ................................T128
TDG533A06100 WN10HD ................................T128
TDG533A06200 WN10HD ................................T128
TDG533A06300 WN10HD ................................T128
TDG533A06350 WN10HD ................................T128
TDG533A06400 WN10HD ................................T128
TDG533A06500 WN10HD ................................T128
Catalogue No. Page(s) Catalogue No. Page(s) Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 117 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRAND O b 28 2015 3 09 PM
Z118 widia.com
Index by Catalogue Number
Index
Catalogue No. Page(s)
TDG533A06528 WN10HD ................................T128
TDG533A06600 WN10HD ................................T128
TDG533A06630 WN10HD ................................T128
TDG533A06700 WN10HD ................................T128
TDG533A06746 WN10HD ................................T128
TDG533A06800 WN10HD ................................T128
TDG533A06900 WN10HD ................................T129
TDG533A07000 WN10HD ................................T129
TDG533A07100 WN10HD ................................T129
TDG533A07145 WN10HD ................................T129
TDG533A07200 WN10HD ................................T129
TDG533A07300 WN10HD ................................T129
TDG533A07400 WN10HD ................................T129
TDG533A07500 WN10HD ................................T129
TDG533A07541 WN10HD ................................T129
TDG533A07600 WN10HD ................................T129
TDG533A07700 WN10HD ................................T129
TDG533A07800 WN10HD ................................T129
TDG533A07900 WN10HD ................................T129
TDG533A07938 WN10HD ................................T129
TDG533A08000 WN10HD ................................T129
TDG533A08100 WN10HD ................................T129
TDG533A08200 WN10HD ................................T129
TDG533A08300 WN10HD ................................T129
TDG533A08334 WN10HD ................................T129
TDG533A08400 WN10HD ................................T129
TDG533A08433 WN10HD ................................T129
TDG533A08500 WN10HD ................................T129
TDG533A08600 WN10HD ................................T129
TDG533A08700 WN10HD ................................T129
TDG533A08733 WN10HD ................................T129
TDG533A08800 WN10HD ................................T129
TDG533A08900 WN10HD ................................T129
TDG533A09000 WN10HD ................................T129
TDG533A09100 WN10HD ................................T129
TDG533A09129 WN10HD ................................T129
TDG533A09200 WN10HD ................................T129
TDG533A09300 WN10HD ................................T129
TDG533A09347 WN10HD ................................T129
TDG533A09400 WN10HD ................................T129
TDG533A09500 WN10HD ................................T129
TDG533A09525 WN10HD ................................T129
TDG533A09600 WN10HD ................................T129
TDG533A09700 WN10HD ................................T129
TDG533A09800 WN10HD ................................T129
TDG533A09900 WN10HD ................................T129
TDG533A09921 WN10HD ................................T130
TDG533A10000 WN10HD ................................T130
TDG533A10100 WN10HD ................................T130
TDG533A10200 WN10HD ................................T130
TDG533A10300 WN10HD ................................T130
TDG533A10320 WN10HD ................................T130
TDG533A10400 WN10HD ................................T130
TDG533A10500 WN10HD ................................T130
TDG533A10600 WN10HD ................................T130
TDG533A10700 WN10HD ................................T130
TDG533A10716 WN10HD ................................T130
TDG533A10800 WN10HD ................................T130
TDG533A10900 WN10HD ................................T130
TDG533A11000 WN10HD ................................T130
TDG533A11100 WN10HD ................................T130
TDG533A11113 WN10HD ................................T130
TDG533A11200 WN10HD ................................T130
TDG533A11300 WN10HD ................................T130
TDG533A11400 WN10HD ................................T130
TDG533A11500 WN10HD ................................T130
TDG533A11509 WN10HD ................................T130
TDG533A11600 WN10HD ................................T130
TDG533A11700 WN10HD ................................T130
TDG533A11800 WN10HD ................................T130
TDG533A11900 WN10HD ................................T130
TDG533A11908 WN10HD ................................T130
TDG533A12000 WN10HD ................................T130
TDG533A12100 WN10HD ................................T130
TDG533A12200 WN10HD ................................T130
TDG533A12300 WN10HD ................................T130
TDG533A12304 WN10HD ................................T130
TDG533A12400 WN10HD ................................T130
TDG533A12500 WN10HD ................................T130
TDG533A12600 WN10HD ................................T130
TDG533A12700 WN10HD ................................T130
TDG533A12800 WN10HD ................................T130
TDG533A12900 WN10HD ................................T130
TDG533A13000 WN10HD ................................T130
TDG533A13096 WN10HD ................................T130
TDG533A13100 WN10HD ................................T130
TDG533A13200 WN10HD ................................T131
TDG533A13300 WN10HD ................................T131
TDG533A13400 WN10HD ................................T131
TDG533A13490 WN10HD ................................T131
TDG533A13500 WN10HD ................................T131
TDG533A13600 WN10HD ................................T131
TDG533A13700 WN10HD ................................T131
TDG533A13800 WN10HD ................................T131
TDG533A13891 WN10HD ................................T131
TDG533A13900 WN10HD ................................T131
TDG533A14000 WN10HD ................................T131
TDG533A14100 WN10HD ................................T131
TDG533A14200 WN10HD ................................T131
TDG533A14288 WN10HD ................................T131
TDG533A14300 WN10HD ................................T131
TDG533A14400 WN10HD ................................T131
TDG533A14500 WN10HD ................................T131
TDG533A14600 WN10HD ................................T131
TDG533A14684 WN10HD ................................T131
TDG533A14700 WN10HD ................................T131
TDG533A14800 WN10HD ................................T131
TDG533A14900 WN10HD ................................T131
TDG533A15000 WN10HD ................................T131
TDG533A15083 WN10HD ................................T131
TDG533A15100 WN10HD ................................T131
TDG533A15200 WN10HD ................................T131
TDG533A15300 WN10HD ................................T131
TDG533A15400 WN10HD ................................T131
TDG533A15479 WN10HD ................................T131
TDG533A15500 WN10HD ................................T131
TDG533A15600 WN10HD ................................T131
TDG533A15700 WN10HD ................................T131
TDG533A15800 WN10HD ................................T131
TDG533A15875 WN10HD ................................T131
TDG533A15900 WN10HD ................................T131
TDG533A16000 WN10HD ................................T131
TDG533A16100 WN10HD ................................T131
TDG533A16200 WN10HD ................................T131
TDG533A16271 WN10HD ................................T131
TDG533A16300 WN10HD ................................T131
TDG533A16400 WN10HD ................................T132
TDG533A16500 WN10HD ................................T132
TDG533A16600 WN10HD ................................T132
TDG533A16670 WN10HD ................................T132
TDG533A16700 WN10HD ................................T132
TDG533A16800 WN10HD ................................T132
TDG533A16900 WN10HD ................................T132
TDG533A17000 WN10HD ................................T132
TDG533A17100 WN10HD ................................T132
TDG533A17200 WN10HD ................................T132
TDG533A17300 WN10HD ................................T132
TDG533A17400 WN10HD ................................T132
TDG533A17463 WN10HD ................................T132
TDG533A17500 WN10HD ................................T132
TDG533A17600 WN10HD ................................T132
TDG533A17700 WN10HD ................................T132
TDG533A17800 WN10HD ................................T132
TDG533A17859 WN10HD ................................T132
TDG533A17900 WN10HD ................................T132
TDG533A18000 WN10HD ................................T132
TDG533A18100 WN10HD ................................T132
TDG533A18200 WN10HD ................................T132
TDG533A18258 WN10HD ................................T132
TDG533A18300 WN10HD ................................T132
TDG533A18400 WN10HD ................................T132
TDG533A18500 WN10HD ................................T132
TDG533A18600 WN10HD ................................T132
TDG533A18654 WN10HD ................................T132
TDG533A18700 WN10HD ................................T132
TDG533A18800 WN10HD ................................T132
TDG533A18900 WN10HD ................................T132
TDG533A19000 WN10HD ................................T132
TDG533A19050 WN10HD ................................T132
TDG533A19100 WN10HD ................................T132
TDG533A19200 WN10HD ................................T132
TDG533A19300 WN10HD ................................T132
TDG533A19400 WN10HD ................................T132
TDG533A19500 WN10HD ................................T132
TDG533A19600 WN10HD ................................T132
TDG533A19700 WN10HD ................................T132
TDG533A19800 WN10HD ................................T132
TDG533A19900 WN10HD ................................T132
TDG533A20000 WN10HD ................................T132
TDG534A03000 WN10HD ................................T133
TDG534A03048 WN10HD ................................T133
TDG534A03100 WN10HD ................................T133
TDG534A03175 WN10HD ................................T133
TDG534A03200 WN10HD ................................T133
TDG534A03264 WN10HD ................................T133
TDG534A03300 WN10HD ................................T133
TDG534A03400 WN10HD ................................T133
TDG534A03455 WN10HD ................................T133
TDG534A03500 WN10HD ................................T133
TDG534A03571 WN10HD ................................T133
TDG534A03600 WN10HD ................................T133
TDG534A03658 WN10HD ................................T133
TDG534A03700 WN10HD ................................T133
TDG534A03734 WN10HD ................................T133
TDG534A03800 WN10HD ................................T133
TDG534A03900 WN10HD ................................T133
TDG534A03970 WN10HD ................................T133
TDG534A04000 WN10HD ................................T133
TDG534A04039 WN10HD ................................T133
TDG534A04090 WN10HD ................................T133
TDG534A04100 WN10HD ................................T133
TDG534A04200 WN10HD ................................T133
TDG534A04217 WN10HD ................................T133
TDG534A04300 WN10HD ................................T134
TDG534A04366 WN10HD ................................T134
TDG534A04400 WN10HD ................................T134
TDG534A04500 WN10HD ................................T134
TDG534A04600 WN10HD ................................T134
TDG534A04623 WN10HD ................................T134
TDG534A04700 WN10HD ................................T134
TDG534A04763 WN10HD ................................T134
TDG534A04800 WN10HD ................................T134
TDG534A04852 WN10HD ................................T134
TDG534A04900 WN10HD ................................T134
TDG534A05000 WN10HD ................................T134
TDG534A05100 WN10HD ................................T134
TDG534A05106 WN10HD ................................T134
TDG534A05159 WN10HD ................................T134
TDG534A05200 WN10HD ................................T134
TDG534A05300 WN10HD ................................T134
TDG534A05400 WN10HD ................................T134
TDG534A05410 WN10HD ................................T134
TDG534A05500 WN10HD ................................T134
TDG534A05558 WN10HD ................................T134
TDG534A05600 WN10HD ................................T134
TDG534A05616 WN10HD ................................T134
TDG534A05700 WN10HD ................................T134
TDG534A05800 WN10HD ................................T134
TDG534A05900 WN10HD ................................T134
TDG534A05954 WN10HD ................................T134
TDG534A06000 WN10HD ................................T134
TDG534A06100 WN10HD ................................T134
TDG534A06200 WN10HD ................................T134
TDG534A06300 WN10HD ................................T134
TDG534A06350 WN10HD ................................T134
TDG534A06400 WN10HD ................................T134
TDG534A06500 WN10HD ................................T134
TDG534A06528 WN10HD ................................T134
TDG534A06600 WN10HD ................................T134
TDG534A06630 WN10HD ................................T134
TDG534A06700 WN10HD ................................T134
TDG534A06746 WN10HD ................................T134
TDG534A06800 WN10HD ................................T134
TDG534A06900 WN10HD ................................T135
TDG534A07000 WN10HD ................................T135
TDG534A07100 WN10HD ................................T135
TDG534A07145 WN10HD ................................T135
TDG534A07200 WN10HD ................................T135
TDG534A07300 WN10HD ................................T135
TDG534A07400 WN10HD ................................T135
TDG534A07500 WN10HD ................................T135
TDG534A07541 WN10HD ................................T135
TDG534A07600 WN10HD ................................T135
TDG534A07700 WN10HD ................................T135
TDG534A07800 WN10HD ................................T135
TDG534A07900 WN10HD ................................T135
TDG534A07938 WN10HD ................................T135
TDG534A08000 WN10HD ................................T135
TDG534A08100 WN10HD ................................T135
TDG534A08200 WN10HD ................................T135
TDG534A08300 WN10HD ................................T135
TDG534A08334 WN10HD ................................T135
TDG534A08400 WN10HD ................................T135
TDG534A08433 WN10HD ................................T135
TDG534A08500 WN10HD ................................T135
TDG534A08600 WN10HD ................................T135
TDG534A08700 WN10HD ................................T135
TDG534A08733 WN10HD ................................T135
TDG534A08800 WN10HD ................................T135
TDG534A08900 WN10HD ................................T135
TDG534A09000 WN10HD ................................T135
TDG534A09100 WN10HD ................................T135
TDG534A09129 WN10HD ................................T135
TDG534A09200 WN10HD ................................T135
TDG534A09300 WN10HD ................................T135
TDG534A09347 WN10HD ................................T135
TDG534A09400 WN10HD ................................T135
TDG534A09500 WN10HD ................................T135
TDG534A09525 WN10HD ................................T135
TDG534A09600 WN10HD ................................T135
TDG534A09700 WN10HD ................................T135
TDG534A09800 WN10HD ................................T135
Catalogue No. Page(s) Catalogue No. Page(s) Catalogue No. Page(s)
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 118 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRANDO b 28 20153 09PM
Z119
widia.com
Index by Catalogue Number
Catalogue No. Page(s)
TDG534A09900 WN10HD ................................T135
TDG534A09921 WN10HD ................................T136
TDG534A10000 WN10HD ................................T136
TDG534A10100 WN10HD ................................T136
TDG534A10200 WN10HD ................................T136
TDG534A10300 WN10HD ................................T136
TDG534A10320 WN10HD ................................T136
TDG534A10400 WN10HD ................................T136
TDG534A10500 WN10HD ................................T136
TDG534A10600 WN10HD ................................T136
TDG534A10700 WN10HD ................................T136
TDG534A10716 WN10HD ................................T136
TDG534A10800 WN10HD ................................T136
TDG534A10900 WN10HD ................................T136
TDG534A11000 WN10HD ................................T136
TDG534A11100 WN10HD ................................T136
TDG534A11113 WN10HD ................................T136
TDG534A11200 WN10HD ................................T136
TDG534A11300 WN10HD ................................T136
TDG534A11400 WN10HD ................................T136
TDG534A11500 WN10HD ................................T136
TDG534A11509 WN10HD ................................T136
TDG534A11600 WN10HD ................................T136
TDG534A11700 WN10HD ................................T136
TDG534A11800 WN10HD ................................T136
TDG534A11900 WN10HD ................................T136
TDG534A11908 WN10HD ................................T136
TDG534A12000 WN10HD ................................T136
TDG534A12100 WN10HD ................................T136
TDG534A12200 WN10HD ................................T136
TDG534A12300 WN10HD ................................T136
TDG534A12304 WN10HD ................................T136
TDG534A12400 WN10HD ................................T136
TDG534A12500 WN10HD ................................T136
TDG534A12600 WN10HD ................................T136
TDG534A12700 WN10HD ................................T136
TDG534A12800 WN10HD ................................T136
TDG534A12900 WN10HD ................................T136
TDG534A13000 WN10HD ................................T136
TDG534A13096 WN10HD ................................T136
TDG534A13100 WN10HD ................................T136
TDG534A13200 WN10HD ................................T137
TDG534A13300 WN10HD ................................T137
TDG534A13400 WN10HD ................................T137
TDG534A13490 WN10HD ................................T137
TDG534A13500 WN10HD ................................T137
TDG534A13600 WN10HD ................................T137
TDG534A13700 WN10HD ................................T137
TDG534A13800 WN10HD ................................T137
TDG534A13891 WN10HD ................................T137
TDG534A13900 WN10HD ................................T137
TDG534A14000 WN10HD ................................T137
TDG534A14100 WN10HD ................................T137
TDG534A14200 WN10HD ................................T137
TDG534A14288 WN10HD ................................T137
TDG534A14300 WN10HD ................................T137
TDG534A14400 WN10HD ................................T137
TDG534A14500 WN10HD ................................T137
TDG534A14600 WN10HD ................................T137
TDG534A14684 WN10HD ................................T137
TDG534A14700 WN10HD ................................T137
TDG534A14800 WN10HD ................................T137
TDG534A14900 WN10HD ................................T137
TDG534A15000 WN10HD ................................T137
TDG534A15083 WN10HD ................................T137
TDG534A15100 WN10HD ................................T137
TDG534A15200 WN10HD ................................T137
TDG534A15300 WN10HD ................................T137
TDG534A15400 WN10HD ................................T137
TDG534A15479 WN10HD ................................T137
TDG534A15500 WN10HD ................................T137
TDG534A15600 WN10HD ................................T137
TDG534A15700 WN10HD ................................T137
TDG534A15800 WN10HD ................................T137
TDG534A15875 WN10HD ................................T137
TDG534A15900 WN10HD ................................T137
TDG534A16000 WN10HD ................................T137
TDG534A16100 WN10HD ................................T137
TDG534A16200 WN10HD ................................T137
TDG534A16271 WN10HD ................................T137
TDG534A16300 WN10HD ................................T137
TDG534A16400 WN10HD ................................T138
TDG534A16500 WN10HD ................................T138
TDG534A16600 WN10HD ................................T138
TDG534A16670 WN10HD ................................T138
TDG534A16700 WN10HD ................................T138
TDG534A16800 WN10HD ................................T138
TDG534A16900 WN10HD ................................T138
TDG534A17000 WN10HD ................................T138
TDG534A17100 WN10HD ................................T138
TDG534A17200 WN10HD ................................T138
TDG534A17300 WN10HD ................................T138
TDG534A17400 WN10HD ................................T138
TDG534A17463 WN10HD ................................T138
TDG534A17500 WN10HD ................................T138
TDG534A17600 WN10HD ................................T138
TDG534A17700 WN10HD ................................T138
TDG534A17800 WN10HD ................................T138
TDG534A17859 WN10HD ................................T138
TDG534A17900 WN10HD ................................T138
TDG534A18000 WN10HD ................................T138
TDG534A18100 WN10HD ................................T138
TDG534A18200 WN10HD ................................T138
TDG534A18258 WN10HD ................................T138
TDG534A18300 WN10HD ................................T138
TDG534A18400 WN10HD ................................T138
TDG534A18500 WN10HD ................................T138
TDG534A18600 WN10HD ................................T138
TDG534A18654 WN10HD ................................T138
TDG534A18700 WN10HD ................................T138
TDG534A18800 WN10HD ................................T138
TDG534A18900 WN10HD ................................T138
TDG534A19000 WN10HD ................................T138
TDG534A19050 WN10HD ................................T138
TDG534A19100 WN10HD ................................T138
TDG534A19200 WN10HD ................................T138
TDG534A19300 WN10HD ................................T138
TDG534A19400 WN10HD ................................T138
TDG534A19500 WN10HD ................................T138
TDG534A19600 WN10HD ................................T138
TDG534A19700 WN10HD ................................T138
TDG534A19800 WN10HD ................................T138
TDG534A19900 WN10HD ................................T138
TDG534A20000 WN10HD ................................T138
TDHB07S102 ALO ............................................. D48
TDHB07S102 C25 ............................................. D48
TDHB07S102 CG5 ............................................. D48
TDHB07S102 CG6 ............................................. D48
TDHB07S102 CM1 ............................................ D48
TDHB07S102 TN7 ............................................. D48
TDHB07S102M CBN6 ........................................ D48
TDHB07S104 C25 ............................................. D48
TDHB07S104 CG5 ............................................. D48
TDHB07S104 CG6 ............................................. D48
TDHB07S104 CM1 ............................................ D48
TDHB07S104 TN7 ............................................. D48
TDHB07S104M CBN6 ........................................ D48
TDHB07S108 CG5 ............................................. D48
TDHB07S1X0 C25 ............................................. D48
TDHB07S1X0 CG5 ............................................. D48
TDHB07S1X0 CM1 ............................................ D48
TDHB07S1X0M CPD1 ........................................ D48
TDHH07S102 CG5 ............................................. D49
TDHH07S102L CG5 ........................................... D49
TDHH07S102L CG6 ........................................... D49
TDHH07S102L CM1 .......................................... D49
TDHH07S102L TN7............................................ D49
TDHH07S102R CG5 ........................................... D49
TDHH07S104 CG5 ............................................. D49
TDHH07S104L CG5 ........................................... D49
TDHH07S104L CM1 .......................................... D49
TDHH07S104L TN7............................................ D49
TDHH07S104R CG5 ........................................... D49
TDM0794UPM WU25PD .................................... U10
TDM0800UPM WU25PD .................................... U10
TDM080R3SCF12M WG ...................................... U6
TDM080R5SCF12M WG ...................................... U7
TDM080R8SCF12M WG ...................................... U8
TDM0810UPM WU25PD .................................... U10
TDM0816UPM WU25PD .................................... U10
TDM0820UPM WU25PD .................................... U10
TDM0830UPM WU25PD .................................... U10
TDM0833UPM WU25PD .................................... U10
TDM0840UPM WU25PD .................................... U10
TDM0843UPM WU25PD .................................... U10
TDM0850UPM WU25PD .................................... U10
TDM085R3SCF12M WG ...................................... U6
TDM085R5SCF12M WG ...................................... U7
TDM085R8SCF12M WG ...................................... U8
TDM0860UPM WU25PD .................................... U10
TDM0861UPM WU25PD .................................... U10
TDM0870UPM WU25PD .................................... U10
TDM0873UPM WU25PD .................................... U10
TDM0880UPM WU25PD .................................... U10
TDM0884UPM WU25PD .................................... U10
TDM0890UPM WU25PD .................................... U10
TDM0900UPM WU25PD .................................... U10
TDM0909UPM WU25PD .................................... U10
TDM090R3SCF12M WG ...................................... U6
TDM090R5SCF12M WG ...................................... U7
TDM090R8SCF12M WG ...................................... U8
TDM0910UPM WU25PD .................................... U10
TDM0913UPM WU25PD .................................... U10
TDM0920UPM WU25PD .................................... U10
TDM0930UPM WU25PD .................................... U10
TDM0935UPM WU25PD .................................... U10
TDM0940UPM WU25PD .................................... U11
TDM0950UPM WU25PD .................................... U11
TDM0953UPM WU25PD .................................... U11
TDM0956UPM WU25PD .................................... U11
TDM0958UPM WU25PD .................................... U11
TDM095R3SCF12M WG ...................................... U6
TDM095R5SCF12M WG ...................................... U7
TDM095R8SCF12M WG ...................................... U8
TDM0960UPM WU25PD .................................... U11
TDM0970UPM WU25PD .................................... U11
TDM0980UPM WU25PD .................................... U11
TDM0990UPM WU25PD .................................... U11
TDM0992UPM WU25PD .................................... U11
TDM1000UPM WU25PD .................................... U11
TDM1002UPM WU25PD .................................... U11
TDM1008UPM WU25PD .................................... U11
TDM100R3SCF16M WG ...................................... U6
TDM100R5SCF16M WG ...................................... U7
TDM100R8SCF16M WG ...................................... U8
TDM1010UPM WU25PD .................................... U11
TDM1020UPM WU25PD .................................... U11
TDM1026UPM WU25PD .................................... U11
TDM1030UPM WU25PD .................................... U11
TDM1032UPM WU25PD .................................... U11
TDM1040UPM WU25PD .................................... U11
TDM1049UPM WU25PD .................................... U11
TDM1050UPM WU25PD .................................... U11
TDM105R3SCF16M WG ...................................... U6
TDM105R5SCF16M WG ...................................... U7
TDM105R8SCF16M WG ...................................... U8
TDM1060UPM WU25PD .................................... U11
TDM1070UPM WU25PD .................................... U11
TDM1072UPM WU25PD .................................... U11
TDM1080UPM WU25PD .................................... U11
TDM1090UPM WU25PD .................................... U11
TDM1100UPM WU25PD .................................... U11
TDM110R3SCF16M WG ...................................... U6
TDM110R5SCF16M WG ...................................... U7
TDM110R8SCF16M WG ...................................... U8
TDM1110UPM WU25PD .................................... U11
TDM1111UPM WU25PD .................................... U11
TDM1120UPM WU25PD .................................... U11
TDM1130UPM WU25PD .................................... U11
TDM1140UPM WU25PD .................................... U11
TDM1150UPM WU25PD .................................... U11
TDM1151UPM WU25PD .................................... U11
TDM115R3SCF16M WG ...................................... U6
TDM115R5SCF16M WG ...................................... U7
TDM115R8SCF16M WG ...................................... U8
TDM1160UPM WU25PD .................................... U11
TDM1161UPM WU25PD .................................... U11
TDM1170UPM WU25PD .................................... U11
TDM1180UPM WU25PD .................................... U11
TDM1190UPM WU25PD .................................... U11
TDM1191UPM WU25PD .................................... U11
TDM1200UPM WU25PD .................................... U12
TDM120R3SCF16M WG ...................................... U6
TDM120R5SCF16M WG ...................................... U7
TDM120R8SCF16M WG ...................................... U8
TDM1210UPM WU25PD .................................... U12
TDM1220UPM WU25PD .................................... U12
TDM1230UPM WU25PD .................................... U12
TDM1240UPM WU25PD .................................... U12
TDM1247UPM WU25PD .................................... U12
TDM1250UPM WU25PD .................................... U12
TDM125R3SCF16M WG ...................................... U6
TDM125R5SCF16M WG ...................................... U7
TDM125R8SCF16M WG ...................................... U8
TDM1260UPM WU25PD .................................... U12
TDM1270UPM WU25PD .................................... U12
TDM1280UPM WU25PD .................................... U12
TDM1290UPM WU25PD .................................... U12
TDM1300UPM WU25PD .................................... U12
TDM130R3SCF16M WG ...................................... U6
TDM130R5SCF16M WG ...................................... U7
TDM130R8SCF16M WG ...................................... U8
TDM1310UPM WU25PD .................................... U12
TDM1320UPM WU25PD .................................... U12
TDM1330UPM WU25PD .................................... U12
TDM1340UPM WU25PD .................................... U12
TDM1349UPM WU25PD .................................... U12
TDM1350UPM WU25PD .................................... U12
TDM135R3SCF16M WG ...................................... U6
TDM135R5SCF16M WG ...................................... U7
TDM135R8SCF16M WG ...................................... U8
TDM1360UPM WU25PD .................................... U12
Catalogue No. Page(s) Catalogue No. Page(s) Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 119 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRAND O b 28 2015 3 09 PM
Z120 widia.com
Index by Catalogue Number
Index
Catalogue No. Page(s)
TDM1370UPM WU25PD .................................... U12
TDM1380UPM WU25PD .................................... U12
TDM1389UPM WU25PD .................................... U12
TDM1390UPM WU25PD .................................... U12
TDM1400UPM WU25PD .................................... U12
TDM140R3SCF16M WG ...................................... U6
TDM140R5SCF16M WG ...................................... U7
TDM140R8SCF16M WG ...................................... U8
TDM1410UPM WU25PD .................................... U12
TDM1420UPM WU25PD .................................... U12
TDM1429UPM WU25PD .................................... U12
TDM1430UPM WU25PD .................................... U12
TDM1440UPM WU25PD .................................... U12
TDM1450UPM WU25PD .................................... U12
TDM145R3SCF16M WG ...................................... U6
TDM145R5SCF16M WG ...................................... U7
TDM145R8SCF16M WG ...................................... U8
TDM1460UPM WU25PD .................................... U12
TDM1467UPM WU25PD .................................... U12
TDM1468UPM WU25PD .................................... U12
TDM1470UPM WU25PD .................................... U12
TDM1480UPM WU25PD .................................... U12
TDM1490UPM WU25PD .................................... U12
TDM1500UPM WU25PD .................................... U12
TDM1508UPM WU25PD .................................... U12
TDM150R3SCF20M WG ...................................... U6
TDM150R5SCF20M WG ...................................... U7
TDM150R8SCF20M WG ...................................... U8
TDM1510UPM WU25PD .................................... U12
TDM1520UPM WU25PD .................................... U12
TDM1530UPM WU25PD .................................... U13
TDM1540UPM WU25PD .................................... U13
TDM1548UPM WU25PD .................................... U13
TDM1550UPM WU25PD .................................... U13
TDM1560UPM WU25PD .................................... U13
TDM1570UPM WU25PD .................................... U13
TDM1580UPM WU25PD .................................... U13
TDM1588UPM WU25PD .................................... U13
TDM1600UPM WU25PD .................................... U13
TDM1603UPM WU25PD .................................... U13
TDM1608UPM WU25PD .................................... U13
TDM160R3SCF20M WG ...................................... U6
TDM160R5SCF20M WG ...................................... U7
TDM160R8SCF20M WG ...................................... U8
TDM1610UPM WU25PD .................................... U13
TDM1618UPM WU25PD .................................... U13
TDM1620UPM WU25PD .................................... U13
TDM1627UPM WU25PD .................................... U13
TDM1630UPM WU25PD .................................... U13
TDM1640UPM WU25PD .................................... U13
TDM1650UPM WU25PD .................................... U13
TDM1660UPM WU25PD .................................... U13
TDM1667UPM WU25PD .................................... U13
TDM1670UPM WU25PD .................................... U13
TDM1680UPM WU25PD .................................... U13
TDM1687UPM WU25PD .................................... U13
TDM1690UPM WU25PD .................................... U13
TDM1700UPM WU25PD .................................... U13
TDM1707UPM WU25PD .................................... U13
TDM170R3SCF20M WG ...................................... U6
TDM170R5SCF20M WG ...................................... U7
TDM170R8SCF20M WG ...................................... U8
TDM1710UPM WU25PD .................................... U13
TDM1720UPM WU25PD .................................... U13
TDM1730UPM WU25PD .................................... U13
TDM1740UPM WU25PD .................................... U13
TDM1746UPM WU25PD .................................... U13
TDM1750UPM WU25PD .................................... U13
TDM1760UPM WU25PD .................................... U13
TDM1770UPM WU25PD .................................... U13
TDM1780UPM WU25PD .................................... U13
TDM1786UPM WU25PD .................................... U13
TDM1790UPM WU25PD .................................... U13
TDM1800UPM WU25PD .................................... U13
TDM180R3SCF25M WG ...................................... U6
TDM180R5SCF25M WG ...................................... U7
TDM180R8SCF25M WG ...................................... U8
TDM1810UPM WU25PD .................................... U13
TDM1820UPM WU25PD .................................... U13
TDM1826UPM WU25PD .................................... U14
TDM1830UPM WU25PD .................................... U14
TDM1840UPM WU25PD .................................... U14
TDM1850UPM WU25PD .................................... U14
TDM1860UPM WU25PD .................................... U14
TDM1865UPM WU25PD .................................... U14
TDM1870UPM WU25PD .................................... U14
TDM1880UPM WU25PD .................................... U14
TDM1890UPM WU25PD .................................... U14
TDM1900UPM WU25PD .................................... U14
TDM1905UPM WU25PD .................................... U14
TDM190R3SCF25M WG ...................................... U6
TDM190R5SCF25M WG ...................................... U7
TDM190R8SCF25M WG ...................................... U8
TDM1910UPM WU25PD .................................... U14
TDM1920UPM WU25PD .................................... U14
TDM1923UPM WU25PD .................................... U14
TDM1925UPM WU25PD .................................... U14
TDM1928UPM WU25PD .................................... U14
TDM1930UPM WU25PD .................................... U14
TDM1935UPM WU25PD .................................... U14
TDM1940UPM WU25PD .................................... U14
TDM1945UPM WU25PD .................................... U14
TDM1950UPM WU25PD .................................... U14
TDM1960UPM WU25PD .................................... U14
TDM1970UPM WU25PD .................................... U14
TDM1980UPM WU25PD .................................... U14
TDM1984UPM WU25PD .................................... U14
TDM1990UPM WU25PD .................................... U14
TDM2000UPM WU25PD .................................... U14
TDM200R3SCF25M WG ...................................... U6
TDM200R5SCF25M WG ...................................... U7
TDM200R8SCF25M WG ...................................... U8
TDM2010UPM WU25PD .................................... U14
TDM2020UPM WU25PD .................................... U14
TDM2024UPM WU25PD .................................... U14
TDM2030UPM WU25PD .................................... U14
TDM2040UPM WU25PD .................................... U14
TDM2050UPM WU25PD .................................... U14
TDM2060UPM WU25PD .................................... U14
TDM2064UPM WU25PD .................................... U14
TDM2070UPM WU25PD .................................... U14
TDM2080UPM WU25PD .................................... U14
TDM2090UPM WU25PD .................................... U14
TDM2099UPM WU25PD .................................... U14
TDM2100UPM WU25PD .................................... U14
TDM210R3SCF25M WG ...................................... U6
TDM210R5SCF25M WG ...................................... U7
TDM210R8SCF25M WG ...................................... U8
TDM2144UPM WU25PD .................................... U15
TDM2150UPM WU25PD .................................... U15
TDM2200UPM WU25PD .................................... U15
TDM220R3SCF25M WG ...................................... U6
TDM220R5SCF25M WG ...................................... U7
TDM220R8SCF25M WG ...................................... U8
TDM2223UPM WU25PD .................................... U15
TDM2245UPM WU25PD .................................... U15
TDM2250UPM WU25PD .................................... U15
TDM2300UPM WU25PD .................................... U15
TDM230R3SCF25M WG ...................................... U6
TDM230R5SCF25M WG ...................................... U7
TDM230R8SCF25M WG ...................................... U8
TDM2350UPM WU25PD .................................... U15
TDM2381UPM WU25PD .................................... U15
TDM2400UPM WU25PD .................................... U15
TDM240R3SCF25M WG ...................................... U6
TDM240R5SCF25M WG ...................................... U7
TDM240R8SCF25M WG ...................................... U8
TDM2450UPM WU25PD .................................... U15
TDM2461UPM WU25PD .................................... U15
TDM2500UPM WU25PD .................................... U15
TDM250R3SCF25M WG ...................................... U6
TDM250R5SCF25M WG ...................................... U7
TDM250R8SCF25M WG ...................................... U8
TDM2540UPM WU25PD .................................... U15
TDM2550UPM WU25PD .................................... U15
TDM2568UPM WU25PD .................................... U15
TDM2581UPM WU25PD .................................... U15
TDM2599UPM WU25PD .................................... U15
TDS202A03000 WP20PD ...................................T50
TDS202A03048 WP20PD ...................................T50
TDS202A03100 WP20PD ...................................T50
TDS202A03175 WP20PD ...................................T50
TDS202A03200 WP20PD ...................................T50
TDS202A03264 WP20PD ...................................T50
TDS202A03300 WP20PD ...................................T50
TDS202A03400 WP20PD ...................................T50
TDS202A03455 WP20PD ...................................T50
TDS202A03500 WP20PD ...................................T50
TDS202A03571 WP20PD ...................................T50
TDS202A03600 WP20PD ...................................T50
TDS202A03658 WP20PD ...................................T50
TDS202A03700 WP20PD ...................................T50
TDS202A03734 WP20PD ...................................T50
TDS202A03800 WP20PD ...................................T50
TDS202A03900 WP20PD ...................................T50
TDS202A03970 WP20PD ...................................T50
TDS202A04000 WP20PD ...................................T50
TDS202A04039 WP20PD ...................................T50
TDS202A04090 WP20PD ...................................T50
TDS202A04100 WP20PD ...................................T50
TDS202A04200 WP20PD ...................................T50
TDS202A04217 WP20PD ...................................T50
TDS202A04300 WP20PD ...................................T51
TDS202A04366 WP20PD ...................................T51
TDS202A04400 WP20PD ...................................T51
TDS202A04500 WP20PD ...................................T51
TDS202A04600 WP20PD ...................................T51
TDS202A04623 WP20PD ...................................T51
TDS202A04700 WP20PD ...................................T51
TDS202A04763 WP20PD ...................................T51
TDS202A04800 WP20PD ...................................T51
TDS202A04852 WP20PD ...................................T51
TDS202A04900 WP20PD ...................................T51
TDS202A05000 WP20PD ...................................T51
TDS202A05100 WP20PD ...................................T51
TDS202A05106 WP20PD ...................................T51
TDS202A05159 WP20PD ...................................T51
TDS202A05200 WP20PD ...................................T51
TDS202A05300 WP20PD ...................................T51
TDS202A05400 WP20PD ...................................T51
TDS202A05410 WP20PD ...................................T51
TDS202A05500 WP20PD ...................................T51
TDS202A05558 WP20PD ...................................T51
TDS202A05600 WP20PD ...................................T51
TDS202A05616 WP20PD ...................................T51
TDS202A05700 WP20PD ...................................T51
TDS202A05800 WP20PD ...................................T51
TDS202A05900 WP20PD ...................................T51
TDS202A05954 WP20PD ...................................T51
TDS202A06000 WP20PD ...................................T51
TDS202A06100 WP20PD ...................................T51
TDS202A06200 WP20PD ...................................T51
TDS202A06300 WP20PD ...................................T51
TDS202A06350 WP20PD ...................................T51
TDS202A06400 WP20PD ...................................T51
TDS202A06500 WP20PD ...................................T51
TDS202A06528 WP20PD ...................................T51
TDS202A06600 WP20PD ...................................T51
TDS202A06630 WP20PD ...................................T51
TDS202A06700 WP20PD ...................................T51
TDS202A06746 WP20PD ...................................T51
TDS202A06800 WP20PD ...................................T51
TDS202A06900 WP20PD ...................................T52
TDS202A07000 WP20PD ...................................T52
TDS202A07100 WP20PD ...................................T52
TDS202A07145 WP20PD ...................................T52
TDS202A07200 WP20PD ...................................T52
TDS202A07300 WP20PD ...................................T52
TDS202A07400 WP20PD ...................................T52
TDS202A07500 WP20PD ...................................T52
TDS202A07541 WP20PD ...................................T52
TDS202A07600 WP20PD ...................................T52
TDS202A07700 WP20PD ...................................T52
TDS202A07800 WP20PD ...................................T52
TDS202A07900 WP20PD ...................................T52
TDS202A07938 WP20PD ...................................T52
TDS202A08000 WP20PD ...................................T52
TDS202A08100 WP20PD ...................................T52
TDS202A08200 WP20PD ...................................T52
TDS202A08300 WP20PD ...................................T52
TDS202A08334 WP20PD ...................................T52
TDS202A08400 WP20PD ...................................T52
TDS202A08433 WP20PD ...................................T52
TDS202A08500 WP20PD ...................................T52
TDS202A08600 WP20PD ...................................T52
TDS202A08700 WP20PD ...................................T52
TDS202A08733 WP20PD ...................................T52
TDS202A08800 WP20PD ...................................T52
TDS202A08900 WP20PD ...................................T52
TDS202A09000 WP20PD ...................................T52
TDS202A09100 WP20PD ...................................T52
TDS202A09129 WP20PD ...................................T52
TDS202A09200 WP20PD ...................................T52
TDS202A09300 WP20PD ...................................T52
TDS202A09347 WP20PD ...................................T52
TDS202A09400 WP20PD ...................................T52
TDS202A09500 WP20PD ...................................T52
TDS202A09525 WP20PD ...................................T52
TDS202A09600 WP20PD ...................................T52
TDS202A09700 WP20PD ...................................T52
TDS202A09800 WP20PD ...................................T52
TDS202A09900 WP20PD ...................................T52
TDS202A09921 WP20PD ...................................T53
TDS202A10000 WP20PD ...................................T53
TDS202A10100 WP20PD ...................................T53
TDS202A10200 WP20PD ...................................T53
TDS202A10300 WP20PD ...................................T53
TDS202A10320 WP20PD ...................................T53
TDS202A10400 WP20PD ...................................T53
TDS202A10500 WP20PD ...................................T53
TDS202A10600 WP20PD ...................................T53
TDS202A10700 WP20PD ...................................T53
Catalogue No. Page(s) Catalogue No. Page(s) Catalogue No. Page(s)
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 120 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRANDO b 28 20153 09PM
Z121
widia.com
Index by Catalogue Number
Catalogue No. Page(s)
TDS202A10716 WP20PD ...................................T53
TDS202A10800 WP20PD ...................................T53
TDS202A10900 WP20PD ...................................T53
TDS202A11000 WP20PD ...................................T53
TDS202A11100 WP20PD ...................................T53
TDS202A11113 WP20PD ...................................T53
TDS202A11200 WP20PD ...................................T53
TDS202A11300 WP20PD ...................................T53
TDS202A11400 WP20PD ...................................T53
TDS202A11500 WP20PD ...................................T53
TDS202A11509 WP20PD ...................................T53
TDS202A11600 WP20PD ...................................T53
TDS202A11700 WP20PD ...................................T53
TDS202A11800 WP20PD ...................................T53
TDS202A11900 WP20PD ...................................T53
TDS202A11908 WP20PD ...................................T53
TDS202A12000 WP20PD ...................................T53
TDS202A12100 WP20PD ...................................T53
TDS202A12200 WP20PD ...................................T53
TDS202A12300 WP20PD ...................................T53
TDS202A12304 WP20PD ...................................T53
TDS202A12400 WP20PD ...................................T53
TDS202A12500 WP20PD ...................................T53
TDS202A12600 WP20PD ...................................T53
TDS202A12700 WP20PD ...................................T53
TDS202A12800 WP20PD ...................................T53
TDS202A12900 WP20PD ...................................T53
TDS202A13000 WP20PD ...................................T53
TDS202A13096 WP20PD ...................................T53
TDS202A13100 WP20PD ...................................T53
TDS202A13200 WP20PD ...................................T54
TDS202A13300 WP20PD ...................................T54
TDS202A13400 WP20PD ...................................T54
TDS202A13500 WP20PD ...................................T54
TDS202A13600 WP20PD ...................................T54
TDS202A13700 WP20PD ...................................T54
TDS202A13800 WP20PD ...................................T54
TDS202A13891 WP20PD ...................................T54
TDS202A13900 WP20PD ...................................T54
TDS202A14000 WP20PD ...................................T54
TDS202A14100 WP20PD ...................................T54
TDS202A14200 WP20PD ...................................T54
TDS202A14288 WP20PD ...................................T54
TDS202A14300 WP20PD ...................................T54
TDS202A14400 WP20PD ...................................T54
TDS202A14500 WP20PD ...................................T54
TDS202A14600 WP20PD ...................................T54
TDS202A14684 WP20PD ...................................T54
TDS202A14700 WP20PD ...................................T54
TDS202A14800 WP20PD ...................................T54
TDS202A14900 WP20PD ...................................T54
TDS202A15000 WP20PD ...................................T54
TDS202A15083 WP20PD ...................................T54
TDS202A15100 WP20PD ...................................T54
TDS202A15200 WP20PD ...................................T54
TDS202A15300 WP20PD ...................................T54
TDS202A15400 WP20PD ...................................T54
TDS202A15479 WP20PD ...................................T54
TDS202A15500 WP20PD ...................................T54
TDS202A15600 WP20PD ...................................T54
TDS202A15700 WP20PD ...................................T54
TDS202A15800 WP20PD ...................................T54
TDS202A15875 WP20PD ...................................T54
TDS202A15900 WP20PD ...................................T54
TDS202A16000 WP20PD ...................................T54
TDS202A16100 WP20PD ...................................T54
TDS202A16200 WP20PD ...................................T54
TDS202A16271 WP20PD ...................................T54
TDS202A16300 WP20PD ...................................T54
TDS202A16400 WP20PD ...................................T54
TDS202A16500 WP20PD ...................................T55
TDS202A16600 WP20PD ...................................T55
TDS202A16670 WP20PD ...................................T55
TDS202A16700 WP20PD ...................................T55
TDS202A16800 WP20PD ...................................T55
TDS202A16900 WP20PD ...................................T55
TDS202A17000 WP20PD ...................................T55
TDS202A17100 WP20PD ...................................T55
TDS202A17200 WP20PD ...................................T55
TDS202A17300 WP20PD ...................................T55
TDS202A17400 WP20PD ...................................T55
TDS202A17463 WP20PD ...................................T55
TDS202A17500 WP20PD ...................................T55
TDS202A17600 WP20PD ...................................T55
TDS202A17700 WP20PD ...................................T55
TDS202A17800 WP20PD ...................................T55
TDS202A17859 WP20PD ...................................T55
TDS202A17900 WP20PD ...................................T55
TDS202A18000 WP20PD ...................................T55
TDS202A18100 WP20PD ...................................T55
TDS202A18200 WP20PD ...................................T55
TDS202A18258 WP20PD ...................................T55
TDS202A18300 WP20PD ...................................T55
TDS202A18400 WP20PD ...................................T55
TDS202A18500 WP20PD ...................................T55
TDS202A18600 WP20PD ...................................T55
TDS202A18654 WP20PD ...................................T55
TDS202A18700 WP20PD ...................................T55
TDS202A18800 WP20PD ...................................T55
TDS202A18900 WP20PD ...................................T55
TDS202A19000 WP20PD ...................................T55
TDS202A19050 WP20PD ...................................T55
TDS202A19100 WP20PD ...................................T55
TDS202A19200 WP20PD ...................................T55
TDS202A19300 WP20PD ...................................T55
TDS202A19400 WP20PD ...................................T55
TDS202A19500 WP20PD ...................................T55
TDS202A19600 WP20PD ...................................T55
TDS202A19700 WP20PD ...................................T55
TDS202A19800 WP20PD ...................................T55
TDS202A19900 WP20PD ...................................T55
TDS202A20000 WP20PD ...................................T55
TDS212A03000 WK15PD ...................................T50
TDS212A03048 WK15PD ...................................T50
TDS212A03100 WK15PD ...................................T50
TDS212A03175 WK15PD ...................................T50
TDS212A03200 WK15PD ...................................T50
TDS212A03264 WK15PD ...................................T50
TDS212A03300 WK15PD ...................................T50
TDS212A03400 WK15PD ...................................T50
TDS212A03455 WK15PD ...................................T50
TDS212A03500 WK15PD ...................................T50
TDS212A03571 WK15PD ...................................T50
TDS212A03600 WK15PD ...................................T50
TDS212A03658 WK15PD ...................................T50
TDS212A03700 WK15PD ...................................T50
TDS212A03734 WK15PD ...................................T50
TDS212A03800 WK15PD ...................................T50
TDS212A03900 WK15PD ...................................T50
TDS212A03970 WK15PD ...................................T50
TDS212A04000 WK15PD ...................................T50
TDS212A04039 WK15PD ...................................T50
TDS212A04090 WK15PD ...................................T50
TDS212A04100 WK15PD ...................................T50
TDS212A04200 WK15PD ...................................T50
TDS212A04217 WK15PD ...................................T50
TDS212A04300 WK15PD ...................................T51
TDS212A04366 WK15PD ...................................T51
TDS212A04400 WK15PD ...................................T51
TDS212A04500 WK15PD ...................................T51
TDS212A04600 WK15PD ...................................T51
TDS212A04623 WK15PD ...................................T51
TDS212A04700 WK15PD ...................................T51
TDS212A04763 WK15PD ...................................T51
TDS212A04800 WK15PD ...................................T51
TDS212A04852 WK15PD ...................................T51
TDS212A04900 WK15PD ...................................T51
TDS212A05000 WK15PD ...................................T51
TDS212A05100 WK15PD ...................................T51
TDS212A05106 WK15PD ...................................T51
TDS212A05159 WK15PD ...................................T51
TDS212A05200 WK15PD ...................................T51
TDS212A05300 WK15PD ...................................T51
TDS212A05400 WK15PD ...................................T51
TDS212A05410 WK15PD ...................................T51
TDS212A05500 WK15PD ...................................T51
TDS212A05558 WK15PD ...................................T51
TDS212A05600 WK15PD ...................................T51
TDS212A05616 WK15PD ...................................T51
TDS212A05700 WK15PD ...................................T51
TDS212A05800 WK15PD ...................................T51
TDS212A05900 WK15PD ...................................T51
TDS212A05954 WK15PD ...................................T51
TDS212A06000 WK15PD ...................................T51
TDS212A06100 WK15PD ...................................T51
TDS212A06200 WK15PD ...................................T51
TDS212A06300 WK15PD ...................................T51
TDS212A06350 WK15PD ...................................T51
TDS212A06400 WK15PD ...................................T51
TDS212A06500 WK15PD ...................................T51
TDS212A06528 WK15PD ...................................T51
TDS212A06600 WK15PD ...................................T51
TDS212A06630 WK15PD ...................................T51
TDS212A06700 WK15PD ...................................T51
TDS212A06746 WK15PD ...................................T51
TDS212A06800 WK15PD ...................................T51
TDS212A06900 WK15PD ...................................T52
TDS212A07000 WK15PD ...................................T52
TDS212A07100 WK15PD ...................................T52
TDS212A07145 WK15PD ...................................T52
TDS212A07200 WK15PD ...................................T52
TDS212A07300 WK15PD ...................................T52
TDS212A07400 WK15PD ...................................T52
TDS212A07500 WK15PD ...................................T52
TDS212A07541 WK15PD ...................................T52
TDS212A07600 WK15PD ...................................T52
TDS212A07700 WK15PD ...................................T52
TDS212A07800 WK15PD ...................................T52
TDS212A07900 WK15PD ...................................T52
TDS212A07938 WK15PD ...................................T52
TDS212A08000 WK15PD ...................................T52
TDS212A08100 WK15PD ...................................T52
TDS212A08200 WK15PD ...................................T52
TDS212A08300 WK15PD ...................................T52
TDS212A08334 WK15PD ...................................T52
TDS212A08400 WK15PD ...................................T52
TDS212A08433 WK15PD ...................................T52
TDS212A08500 WK15PD ...................................T52
TDS212A08600 WK15PD ...................................T52
TDS212A08700 WK15PD ...................................T52
TDS212A08733 WK15PD ...................................T52
TDS212A08800 WK15PD ...................................T52
TDS212A08900 WK15PD ...................................T52
TDS212A09000 WK15PD ...................................T52
TDS212A09100 WK15PD ...................................T52
TDS212A09129 WK15PD ...................................T52
TDS212A09200 WK15PD ...................................T52
TDS212A09300 WK15PD ...................................T52
TDS212A09347 WK15PD ...................................T52
TDS212A09400 WK15PD ...................................T52
TDS212A09500 WK15PD ...................................T52
TDS212A09525 WK15PD ...................................T52
TDS212A09600 WK15PD ...................................T52
TDS212A09700 WK15PD ...................................T52
TDS212A09800 WK15PD ...................................T52
TDS212A09900 WK15PD ...................................T52
TDS212A09921 WK15PD ...................................T53
TDS212A10000 WK15PD ...................................T53
TDS212A10100 WK15PD ...................................T53
TDS212A10200 WK15PD ...................................T53
TDS212A10300 WK15PD ...................................T53
TDS212A10320 WK15PD ...................................T53
TDS212A10400 WK15PD ...................................T53
TDS212A10500 WK15PD ...................................T53
TDS212A10600 WK15PD ...................................T53
TDS212A10700 WK15PD ...................................T53
TDS212A10716 WK15PD ...................................T53
TDS212A10800 WK15PD ...................................T53
TDS212A10900 WK15PD ...................................T53
TDS212A11000 WK15PD ...................................T53
TDS212A11100 WK15PD ...................................T53
TDS212A11113 WK15PD ...................................T53
TDS212A11200 WK15PD ...................................T53
TDS212A11300 WK15PD ...................................T53
TDS212A11400 WK15PD ...................................T53
TDS212A11500 WK15PD ...................................T53
TDS212A11509 WK15PD ...................................T53
TDS212A11600 WK15PD ...................................T53
TDS212A11700 WK15PD ...................................T53
TDS212A11800 WK15PD ...................................T53
TDS212A11900 WK15PD ...................................T53
TDS212A11908 WK15PD ...................................T53
TDS212A12000 WK15PD ...................................T53
TDS212A12100 WK15PD ...................................T53
TDS212A12200 WK15PD ...................................T53
TDS212A12300 WK15PD ...................................T53
TDS212A12304 WK15PD ...................................T53
TDS212A12400 WK15PD ...................................T53
TDS212A12500 WK15PD ...................................T53
TDS212A12600 WK15PD ...................................T53
TDS212A12700 WK15PD ...................................T53
TDS212A12800 WK15PD ...................................T53
TDS212A12900 WK15PD ...................................T53
TDS212A13000 WK15PD ...................................T53
TDS212A13096 WK15PD ...................................T53
TDS212A13100 WK15PD ...................................T53
TDS212A13200 WK15PD ...................................T54
TDS212A13300 WK15PD ...................................T54
TDS212A13400 WK15PD ...................................T54
TDS212A13500 WK15PD ...................................T54
TDS212A13600 WK15PD ...................................T54
TDS212A13700 WK15PD ...................................T54
TDS212A13800 WK15PD ...................................T54
TDS212A13891 WK15PD ...................................T54
TDS212A13900 WK15PD ...................................T54
TDS212A14000 WK15PD ...................................T54
TDS212A14100 WK15PD ...................................T54
TDS212A14200 WK15PD ...................................T54
TDS212A14288 WK15PD ...................................T54
TDS212A14300 WK15PD ...................................T54
TDS212A14400 WK15PD ...................................T54
TDS212A14500 WK15PD ...................................T54
Catalogue No. Page(s) Catalogue No. Page(s) Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 121 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRAND O b 28 2015 3 09 PM
Z122 widia.com
Index by Catalogue Number
Index
Catalogue No. Page(s)
TDS212A14600 WK15PD ...................................T54
TDS212A14684 WK15PD ...................................T54
TDS212A14700 WK15PD ...................................T54
TDS212A14800 WK15PD ...................................T54
TDS212A14900 WK15PD ...................................T54
TDS212A15000 WK15PD ...................................T54
TDS212A15083 WK15PD ...................................T54
TDS212A15100 WK15PD ...................................T54
TDS212A15200 WK15PD ...................................T54
TDS212A15300 WK15PD ...................................T54
TDS212A15400 WK15PD ...................................T54
TDS212A15479 WK15PD ...................................T54
TDS212A15500 WK15PD ...................................T54
TDS212A15600 WK15PD ...................................T54
TDS212A15700 WK15PD ...................................T54
TDS212A15800 WK15PD ...................................T54
TDS212A15875 WK15PD ...................................T54
TDS212A15900 WK15PD ...................................T54
TDS212A16000 WK15PD ...................................T54
TDS212A16100 WK15PD ...................................T54
TDS212A16200 WK15PD ...................................T54
TDS212A16271 WK15PD ...................................T54
TDS212A16300 WK15PD ...................................T54
TDS212A16400 WK15PD ...................................T54
TDS212A16500 WK15PD ...................................T55
TDS212A16600 WK15PD ...................................T55
TDS212A16670 WK15PD ...................................T55
TDS212A16700 WK15PD ...................................T55
TDS212A16800 WK15PD ...................................T55
TDS212A16900 WK15PD ...................................T55
TDS212A17000 WK15PD ...................................T55
TDS212A17100 WK15PD ...................................T55
TDS212A17200 WK15PD ...................................T55
TDS212A17300 WK15PD ...................................T55
TDS212A17400 WK15PD ...................................T55
TDS212A17463 WK15PD ...................................T55
TDS212A17500 WK15PD ...................................T55
TDS212A17600 WK15PD ...................................T55
TDS212A17700 WK15PD ...................................T55
TDS212A17800 WK15PD ...................................T55
TDS212A17859 WK15PD ...................................T55
TDS212A17900 WK15PD ...................................T55
TDS212A18000 WK15PD ...................................T55
TDS212A18100 WK15PD ...................................T55
TDS212A18200 WK15PD ...................................T55
TDS212A18258 WK15PD ...................................T55
TDS212A18300 WK15PD ...................................T55
TDS212A18400 WK15PD ...................................T55
TDS212A18500 WK15PD ...................................T55
TDS212A18600 WK15PD ...................................T55
TDS212A18654 WK15PD ...................................T55
TDS212A18700 WK15PD ...................................T55
TDS212A18800 WK15PD ...................................T55
TDS212A18900 WK15PD ...................................T55
TDS212A19000 WK15PD ...................................T55
TDS212A19050 WK15PD ...................................T55
TDS212A19100 WK15PD ...................................T55
TDS212A19200 WK15PD ...................................T55
TDS212A19300 WK15PD ...................................T55
TDS212A19400 WK15PD ...................................T55
TDS212A19500 WK15PD ...................................T55
TDS212A19600 WK15PD ...................................T55
TDS212A19700 WK15PD ...................................T55
TDS212A19800 WK15PD ...................................T55
TDS212A19900 WK15PD ...................................T55
TDS212A20000 WK15PD ...................................T55
TDS301A03000 WU25PD ...................................T78
TDS301A03100 WU25PD ...................................T78
TDS301A03200 WU25PD ...................................T78
TDS301A03250 WU25PD ...................................T78
TDS301A03300 WU25PD ...................................T78
TDS301A03400 WU25PD ...................................T78
TDS301A03500 WU25PD ...................................T78
TDS301A03600 WU25PD ...................................T78
TDS301A03700 WU25PD ...................................T78
TDS301A03800 WU25PD ...................................T78
TDS301A03900 WU25PD ...................................T78
TDS301A04000 WU25PD ...................................T78
TDS301A04100 WU25PD ...................................T78
TDS301A04200 WU25PD ...................................T78
TDS301A04300 WU25PD ...................................T78
TDS301A04370 WU25PD ...................................T78
TDS301A04400 WU25PD ...................................T78
TDS301A04500 WU25PD ...................................T78
TDS301A04600 WU25PD ...................................T78
TDS301A04650 WU25PD ...................................T78
TDS301A04700 WU25PD ...................................T78
TDS301A04760 WU25PD ...................................T78
TDS301A04800 WU25PD ...................................T78
TDS301A04900 WU25PD ...................................T78
TDS301A05000 WU25PD ...................................T79
TDS301A05100 WU25PD ...................................T79
TDS301A05160 WU25PD ...................................T79
TDS301A05200 WU25PD ...................................T79
TDS301A05300 WU25PD ...................................T79
TDS301A05400 WU25PD ...................................T79
TDS301A05500 WU25PD ...................................T79
TDS301A05550 WU25PD ...................................T79
TDS301A05560 WU25PD ...................................T79
TDS301A05600 WU25PD ...................................T79
TDS301A05700 WU25PD ...................................T79
TDS301A05800 WU25PD ...................................T79
TDS301A05900 WU25PD ...................................T79
TDS301A05950 WU25PD ...................................T79
TDS301A06000 WU25PD ...................................T79
TDS301A06100 WU25PD ...................................T79
TDS301A06200 WU25PD ...................................T79
TDS301A06300 WU25PD ...................................T79
TDS301A06350 WU25PD ...................................T79
TDS301A06400 WU25PD ...................................T79
TDS301A06500 WU25PD ...................................T79
TDS301A06600 WU25PD ...................................T79
TDS301A06700 WU25PD ...................................T79
TDS301A06750 WU25PD ...................................T79
TDS301A06800 WU25PD ...................................T79
TDS301A06900 WU25PD ...................................T79
TDS301A07000 WU25PD ...................................T79
TDS301A07100 WU25PD ...................................T79
TDS301A07140 WU25PD ...................................T79
TDS301A07200 WU25PD ...................................T79
TDS301A07300 WU25PD ...................................T79
TDS301A07400 WU25PD ...................................T79
TDS301A07500 WU25PD ...................................T79
TDS301A07540 WU25PD ...................................T79
TDS301A07600 WU25PD ...................................T79
TDS301A07700 WU25PD ...................................T79
TDS301A07800 WU25PD ...................................T79
TDS301A07900 WU25PD ...................................T79
TDS301A07940 WU25PD ...................................T79
TDS301A08000 WU25PD ...................................T79
TDS301A08100 WU25PD ...................................T80
TDS301A08200 WU25PD ...................................T80
TDS301A08300 WU25PD ...................................T80
TDS301A08330 WU25PD ...................................T80
TDS301A08400 WU25PD ...................................T80
TDS301A08500 WU25PD ...................................T80
TDS301A08600 WU25PD ...................................T80
TDS301A08700 WU25PD ...................................T80
TDS301A08800 WU25PD ...................................T80
TDS301A08900 WU25PD ...................................T80
TDS301A09000 WU25PD ...................................T80
TDS301A09100 WU25PD ...................................T80
TDS301A09130 WU25PD ...................................T80
TDS301A09200 WU25PD ...................................T80
TDS301A09300 WU25PD ...................................T80
TDS301A09400 WU25PD ...................................T80
TDS301A09500 WU25PD ...................................T80
TDS301A09520 WU25PD ...................................T80
TDS301A09600 WU25PD ...................................T80
TDS301A09700 WU25PD ...................................T80
TDS301A09800 WU25PD ...................................T80
TDS301A09900 WU25PD ...................................T80
TDS301A09920 WU25PD ...................................T80
TDS301A10000 WU25PD ...................................T80
TDS301A10100 WU25PD ...................................T80
TDS301A10200 WU25PD ...................................T80
TDS301A10300 WU25PD ...................................T80
TDS301A10320 WU25PD ...................................T80
TDS301A10400 WU25PD ...................................T80
TDS301A10500 WU25PD ...................................T80
TDS301A10600 WU25PD ...................................T80
TDS301A10700 WU25PD ...................................T80
TDS301A10720 WU25PD ...................................T80
TDS301A10800 WU25PD ...................................T80
TDS301A10900 WU25PD ...................................T80
TDS301A11000 WU25PD ...................................T80
TDS301A11100 WU25PD ...................................T80
TDS301A11110 WU25PD ...................................T80
TDS301A11200 WU25PD ...................................T80
TDS301A11300 WU25PD ...................................T80
TDS301A11400 WU25PD ...................................T81
TDS301A11500 WU25PD ...................................T81
TDS301A11600 WU25PD ...................................T81
TDS301A11700 WU25PD ...................................T81
TDS301A11800 WU25PD ...................................T81
TDS301A11900 WU25PD ...................................T81
TDS301A11910 WU25PD ...................................T81
TDS301A12000 WU25PD ...................................T81
TDS301A12300 WU25PD ...................................T81
TDS301A12500 WU25PD ...................................T81
TDS301A12700 WU25PD ...................................T81
TDS301A12800 WU25PD ...................................T81
TDS301A13000 WU25PD ...................................T81
TDS301A13500 WU25PD ...................................T81
TDS301A13800 WU25PD ...................................T81
TDS301A14000 WU25PD ...................................T81
TDS301A14290 WU25PD ...................................T81
TDS301A14500 WU25PD ...................................T81
TDS301A14800 WU25PD ...................................T81
TDS301A15000 WU25PD ...................................T81
TDS301A15500 WU25PD ...................................T81
TDS301A15800 WU25PD ...................................T81
TDS301A15870 WU25PD ...................................T81
TDS301A16000 WU25PD ...................................T81
TDS301A16500 WU25PD ...................................T81
TDS301A16670 WU25PD ...................................T81
TDS301A16800 WU25PD ...................................T81
TDS301A17000 WU25PD ...................................T81
TDS301A17500 WU25PD ...................................T81
TDS301A17800 WU25PD ...................................T81
TDS301A18000 WU25PD ...................................T81
TDS301A18500 WU25PD ...................................T81
TDS301A18800 WU25PD ...................................T81
TDS301A19000 WU25PD ...................................T81
TDS301A19050 WU25PD ...................................T81
TDS301A19500 WU25PD ...................................T81
TDS301A19800 WU25PD ...................................T81
TDS301A20000 WU25PD ...................................T81
TDS401A03000 WP20PD ...................................T56
TDS401A03048 WP20PD ...................................T56
TDS401A03100 WP20PD ...................................T56
TDS401A03175 WP20PD ...................................T56
TDS401A03200 WP20PD ...................................T56
TDS401A03264 WP20PD ...................................T56
TDS401A03300 WP20PD ...................................T56
TDS401A03400 WP20PD ...................................T56
TDS401A03455 WP20PD ...................................T56
TDS401A03500 WP20PD ...................................T56
TDS401A03571 WP20PD ...................................T56
TDS401A03600 WP20PD ...................................T56
TDS401A03658 WP20PD ...................................T56
TDS401A03700 WP20PD ...................................T56
TDS401A03734 WP20PD ...................................T56
TDS401A03800 WP20PD ...................................T56
TDS401A03900 WP20PD ...................................T56
TDS401A03970 WP20PD ...................................T56
TDS401A04000 WP20PD ...................................T56
TDS401A04039 WP20PD ...................................T56
TDS401A04090 WP20PD ...................................T56
TDS401A04100 WP20PD ...................................T56
TDS401A04200 WP20PD ...................................T56
TDS401A04217 WP20PD ...................................T56
TDS401A04300 WP20PD ...................................T57
TDS401A04366 WP20PD ...................................T57
TDS401A04400 WP20PD ...................................T57
TDS401A04500 WP20PD ...................................T57
TDS401A04600 WP20PD ...................................T57
TDS401A04623 WP20PD ...................................T57
TDS401A04700 WP20PD ...................................T57
TDS401A04763 WP20PD ...................................T57
TDS401A04800 WP20PD ...................................T57
TDS401A04852 WP20PD ...................................T57
TDS401A04900 WP20PD ...................................T57
TDS401A05000 WP20PD ...................................T57
TDS401A05100 WP20PD ...................................T57
TDS401A05106 WP20PD ...................................T57
TDS401A05159 WP20PD ...................................T57
TDS401A05200 WP20PD ...................................T57
TDS401A05300 WP20PD ...................................T57
TDS401A05400 WP20PD ...................................T57
TDS401A05410 WP20PD ...................................T57
TDS401A05500 WP20PD ...................................T57
TDS401A05558 WP20PD ...................................T57
TDS401A05600 WP20PD ...................................T57
TDS401A05616 WP20PD ...................................T57
TDS401A05700 WP20PD ...................................T57
TDS401A05800 WP20PD ...................................T57
TDS401A05900 WP20PD ...................................T57
TDS401A05954 WP20PD ...................................T57
TDS401A06000 WP20PD ...................................T57
TDS401A06100 WP20PD ...................................T57
TDS401A06200 WP20PD ...................................T57
TDS401A06300 WP20PD ...................................T57
TDS401A06350 WP20PD ...................................T57
TDS401A06400 WP20PD ...................................T57
TDS401A06500 WP20PD ...................................T57
TDS401A06528 WP20PD ...................................T57
TDS401A06600 WP20PD ...................................T57
TDS401A06630 WP20PD ...................................T57
TDS401A06700 WP20PD ...................................T57
TDS401A06746 WP20PD ...................................T57
TDS401A06800 WP20PD ...................................T57
Catalogue No. Page(s) Catalogue No. Page(s) Catalogue No. Page(s)
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 122 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRANDO b 28 20153 09PM
Z123
widia.com
Index by Catalogue Number
Catalogue No. Page(s)
TDS401A06900 WP20PD ...................................T58
TDS401A07000 WP20PD ...................................T58
TDS401A07100 WP20PD ...................................T58
TDS401A07145 WP20PD ...................................T58
TDS401A07200 WP20PD ...................................T58
TDS401A07300 WP20PD ...................................T58
TDS401A07400 WP20PD ...................................T58
TDS401A07500 WP20PD ...................................T58
TDS401A07541 WP20PD ...................................T58
TDS401A07600 WP20PD ...................................T58
TDS401A07700 WP20PD ...................................T58
TDS401A07800 WP20PD ...................................T58
TDS401A07900 WP20PD ...................................T58
TDS401A07938 WP20PD ...................................T58
TDS401A08000 WP20PD ...................................T58
TDS401A08100 WP20PD ...................................T58
TDS401A08200 WP20PD ...................................T58
TDS401A08300 WP20PD ...................................T58
TDS401A08334 WP20PD ...................................T58
TDS401A08400 WP20PD ...................................T58
TDS401A08433 WP20PD ...................................T58
TDS401A08500 WP20PD ...................................T58
TDS401A08600 WP20PD ...................................T58
TDS401A08700 WP20PD ...................................T58
TDS401A08733 WP20PD ...................................T58
TDS401A08800 WP20PD ...................................T58
TDS401A08900 WP20PD ...................................T58
TDS401A09000 WP20PD ...................................T58
TDS401A09100 WP20PD ...................................T58
TDS401A09129 WP20PD ...................................T58
TDS401A09200 WP20PD ...................................T58
TDS401A09300 WP20PD ...................................T58
TDS401A09347 WP20PD ...................................T58
TDS401A09400 WP20PD ...................................T58
TDS401A09500 WP20PD ...................................T58
TDS401A09525 WP20PD ...................................T58
TDS401A09600 WP20PD ...................................T58
TDS401A09700 WP20PD ...................................T58
TDS401A09800 WP20PD ...................................T58
TDS401A09900 WP20PD ...................................T58
TDS401A09921 WP20PD ...................................T59
TDS401A10000 WP20PD ...................................T59
TDS401A10100 WP20PD ...................................T59
TDS401A10200 WP20PD ...................................T59
TDS401A10300 WP20PD ...................................T59
TDS401A10320 WP20PD ...................................T59
TDS401A10400 WP20PD ...................................T59
TDS401A10500 WP20PD ...................................T59
TDS401A10600 WP20PD ...................................T59
TDS401A10700 WP20PD ...................................T59
TDS401A10716 WP20PD ...................................T59
TDS401A10800 WP20PD ...................................T59
TDS401A10900 WP20PD ...................................T59
TDS401A11000 WP20PD ...................................T59
TDS401A11100 WP20PD ...................................T59
TDS401A11113 WP20PD ...................................T59
TDS401A11200 WP20PD ...................................T59
TDS401A11300 WP20PD ...................................T59
TDS401A11400 WP20PD ...................................T59
TDS401A11500 WP20PD ...................................T59
TDS401A11509 WP20PD ...................................T59
TDS401A11600 WP20PD ...................................T59
TDS401A11700 WP20PD ...................................T59
TDS401A11800 WP20PD ...................................T59
TDS401A11900 WP20PD ...................................T59
TDS401A11908 WP20PD ...................................T59
TDS401A12000 WP20PD ...................................T59
TDS401A12100 WP20PD ...................................T59
TDS401A12200 WP20PD ...................................T59
TDS401A12300 WP20PD ...................................T59
TDS401A12304 WP20PD ...................................T59
TDS401A12400 WP20PD ...................................T59
TDS401A12500 WP20PD ...................................T59
TDS401A12600 WP20PD ...................................T59
TDS401A12700 WP20PD ...................................T59
TDS401A12800 WP20PD ...................................T59
TDS401A12900 WP20PD ...................................T59
TDS401A13000 WP20PD ...................................T59
TDS401A13096 WP20PD ...................................T59
TDS401A13100 WP20PD ...................................T59
TDS401A13200 WP20PD ...................................T60
TDS401A13300 WP20PD ...................................T60
TDS401A13400 WP20PD ...................................T60
TDS401A13500 WP20PD ...................................T60
TDS401A13600 WP20PD ...................................T60
TDS401A13700 WP20PD ...................................T60
TDS401A13800 WP20PD ...................................T60
TDS401A13891 WP20PD ...................................T60
TDS401A13900 WP20PD ...................................T60
TDS401A14000 WP20PD ...................................T60
TDS401A14100 WP20PD ...................................T60
TDS401A14200 WP20PD ...................................T60
TDS401A14288 WP20PD ...................................T60
TDS401A14300 WP20PD ...................................T60
TDS401A14400 WP20PD ...................................T60
TDS401A14500 WP20PD ...................................T60
TDS401A14600 WP20PD ...................................T60
TDS401A14684 WP20PD ...................................T60
TDS401A14700 WP20PD ...................................T60
TDS401A14800 WP20PD ...................................T60
TDS401A14900 WP20PD ...................................T60
TDS401A15000 WP20PD ...................................T60
TDS401A15083 WP20PD ...................................T60
TDS401A15100 WP20PD ...................................T60
TDS401A15200 WP20PD ...................................T60
TDS401A15300 WP20PD ...................................T60
TDS401A15400 WP20PD ...................................T60
TDS401A15479 WP20PD ...................................T60
TDS401A15500 WP20PD ...................................T60
TDS401A15600 WP20PD ...................................T60
TDS401A15700 WP20PD ...................................T60
TDS401A15800 WP20PD ...................................T60
TDS401A15875 WP20PD ...................................T60
TDS401A15900 WP20PD ...................................T60
TDS401A16000 WP20PD ...................................T60
TDS401A16100 WP20PD ...................................T60
TDS401A16200 WP20PD ...................................T60
TDS401A16271 WP20PD ...................................T60
TDS401A16300 WP20PD ...................................T60
TDS401A16400 WP20PD ...................................T60
TDS401A16500 WP20PD ...................................T61
TDS401A16600 WP20PD ...................................T61
TDS401A16670 WP20PD ...................................T61
TDS401A16700 WP20PD ...................................T61
TDS401A16800 WP20PD ...................................T61
TDS401A16900 WP20PD ...................................T61
TDS401A17000 WP20PD ...................................T61
TDS401A17100 WP20PD ...................................T61
TDS401A17200 WP20PD ...................................T61
TDS401A17300 WP20PD ...................................T61
TDS401A17400 WP20PD ...................................T61
TDS401A17463 WP20PD ...................................T61
TDS401A17500 WP20PD ...................................T61
TDS401A17600 WP20PD ...................................T61
TDS401A17700 WP20PD ...................................T61
TDS401A17800 WP20PD ...................................T61
TDS401A17859 WP20PD ...................................T61
TDS401A17900 WP20PD ...................................T61
TDS401A18000 WP20PD ...................................T61
TDS401A18100 WP20PD ...................................T61
TDS401A18200 WP20PD ...................................T61
TDS401A18258 WP20PD ...................................T61
TDS401A18300 WP20PD ...................................T61
TDS401A18400 WP20PD ...................................T61
TDS401A18500 WP20PD ...................................T61
TDS401A18600 WP20PD ...................................T61
TDS401A18654 WP20PD ...................................T61
TDS401A18700 WP20PD ...................................T61
TDS401A18800 WP20PD ...................................T61
TDS401A18900 WP20PD ...................................T61
TDS401A19000 WP20PD ...................................T61
TDS401A19050 WP20PD ...................................T61
TDS401A19100 WP20PD ...................................T61
TDS401A19200 WP20PD ...................................T61
TDS401A19300 WP20PD ...................................T61
TDS401A19400 WP20PD ...................................T61
TDS401A19500 WP20PD ...................................T61
TDS401A19600 WP20PD ...................................T61
TDS401A19700 WP20PD ...................................T61
TDS401A19800 WP20PD ...................................T61
TDS401A19900 WP20PD ...................................T61
TDS401A20000 WP20PD ...................................T61
TDS402A03000 WP20PD ...................................T62
TDS402A03048 WP20PD ...................................T62
TDS402A03100 WP20PD ...................................T62
TDS402A03175 WP20PD ...................................T62
TDS402A03200 WP20PD ...................................T62
TDS402A03264 WP20PD ...................................T62
TDS402A03300 WP20PD ...................................T62
TDS402A03400 WP20PD ...................................T62
TDS402A03455 WP20PD ...................................T62
TDS402A03500 WP20PD ...................................T62
TDS402A03571 WP20PD ...................................T62
TDS402A03600 WP20PD ...................................T62
TDS402A03658 WP20PD ...................................T62
TDS402A03700 WP20PD ...................................T62
TDS402A03734 WP20PD ...................................T62
TDS402A03800 WP20PD ...................................T62
TDS402A03900 WP20PD ...................................T62
TDS402A03970 WP20PD ...................................T62
TDS402A04000 WP20PD ...................................T62
TDS402A04039 WP20PD ...................................T62
TDS402A04090 WP20PD ...................................T62
TDS402A04100 WP20PD ...................................T62
TDS402A04200 WP20PD ...................................T62
TDS402A04217 WP20PD ...................................T62
TDS402A04300 WP20PD ...................................T63
TDS402A04366 WP20PD ...................................T63
TDS402A04400 WP20PD ...................................T63
TDS402A04500 WP20PD ...................................T63
TDS402A04600 WP20PD ...................................T63
TDS402A04623 WP20PD ...................................T63
TDS402A04700 WP20PD ...................................T63
TDS402A04763 WP20PD ...................................T63
TDS402A04800 WP20PD ...................................T63
TDS402A04852 WP20PD ...................................T63
TDS402A04900 WP20PD ...................................T63
TDS402A05000 WP20PD ...................................T63
TDS402A05100 WP20PD ...................................T63
TDS402A05106 WP20PD ...................................T63
TDS402A05159 WP20PD ...................................T63
TDS402A05200 WP20PD ...................................T63
TDS402A05300 WP20PD ...................................T63
TDS402A05400 WP20PD ...................................T63
TDS402A05410 WP20PD ...................................T63
TDS402A05500 WP20PD ...................................T63
TDS402A05558 WP20PD ...................................T63
TDS402A05600 WP20PD ...................................T63
TDS402A05616 WP20PD ...................................T63
TDS402A05700 WP20PD ...................................T63
TDS402A05800 WP20PD ...................................T63
TDS402A05900 WP20PD ...................................T63
TDS402A05954 WP20PD ...................................T63
TDS402A06000 WP20PD ...................................T63
TDS402A06100 WP20PD ...................................T63
TDS402A06200 WP20PD ...................................T63
TDS402A06300 WP20PD ...................................T63
TDS402A06350 WP20PD ...................................T63
TDS402A06400 WP20PD ...................................T63
TDS402A06500 WP20PD ...................................T63
TDS402A06528 WP20PD ...................................T63
TDS402A06600 WP20PD ...................................T63
TDS402A06630 WP20PD ...................................T63
TDS402A06700 WP20PD ...................................T63
TDS402A06746 WP20PD ...................................T63
TDS402A06800 WP20PD ...................................T63
TDS402A06900 WP20PD ...................................T64
TDS402A07000 WP20PD ...................................T64
TDS402A07100 WP20PD ...................................T64
TDS402A07145 WP20PD ...................................T64
TDS402A07200 WP20PD ...................................T64
TDS402A07300 WP20PD ...................................T64
TDS402A07400 WP20PD ...................................T64
TDS402A07500 WP20PD ...................................T64
TDS402A07541 WP20PD ...................................T64
TDS402A07600 WP20PD ...................................T64
TDS402A07700 WP20PD ...................................T64
TDS402A07800 WP20PD ...................................T64
TDS402A07900 WP20PD ...................................T64
TDS402A07938 WP20PD ...................................T64
TDS402A08000 WP20PD ...................................T64
TDS402A08100 WP20PD ...................................T64
TDS402A08200 WP20PD ...................................T64
TDS402A08300 WP20PD ...................................T64
TDS402A08334 WP20PD ...................................T64
TDS402A08400 WP20PD ...................................T64
TDS402A08433 WP20PD ...................................T64
TDS402A08500 WP20PD ...................................T64
TDS402A08600 WP20PD ...................................T64
TDS402A08700 WP20PD ...................................T64
TDS402A08733 WP20PD ...................................T64
TDS402A08800 WP20PD ...................................T64
TDS402A08900 WP20PD ...................................T64
TDS402A09000 WP20PD ...................................T64
TDS402A09100 WP20PD ...................................T64
TDS402A09129 WP20PD ...................................T64
TDS402A09200 WP20PD ...................................T64
TDS402A09300 WP20PD ...................................T64
TDS402A09347 WP20PD ...................................T64
TDS402A09400 WP20PD ...................................T64
TDS402A09500 WP20PD ...................................T64
TDS402A09525 WP20PD ...................................T64
TDS402A09600 WP20PD ...................................T64
TDS402A09700 WP20PD ...................................T64
TDS402A09800 WP20PD ...................................T64
TDS402A09900 WP20PD ...................................T64
TDS402A09921 WP20PD ...................................T65
TDS402A10000 WP20PD ...................................T65
TDS402A10100 WP20PD ...................................T65
TDS402A10200 WP20PD ...................................T65
TDS402A10300 WP20PD ...................................T65
TDS402A10320 WP20PD ...................................T65
Catalogue No. Page(s) Catalogue No. Page(s) Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 123 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRAND O b 28 2015 3 09 PM
Z124 widia.com
Index by Catalogue Number
Index
Catalogue No. Page(s)
TDS402A10400 WP20PD ...................................T65
TDS402A10500 WP20PD ...................................T65
TDS402A10600 WP20PD ...................................T65
TDS402A10700 WP20PD ...................................T65
TDS402A10716 WP20PD ...................................T65
TDS402A10800 WP20PD ...................................T65
TDS402A10900 WP20PD ...................................T65
TDS402A11000 WP20PD ...................................T65
TDS402A11100 WP20PD ...................................T65
TDS402A11113 WP20PD ...................................T65
TDS402A11200 WP20PD ...................................T65
TDS402A11300 WP20PD ...................................T65
TDS402A11400 WP20PD ...................................T65
TDS402A11500 WP20PD ...................................T65
TDS402A11509 WP20PD ...................................T65
TDS402A11600 WP20PD ...................................T65
TDS402A11700 WP20PD ...................................T65
TDS402A11800 WP20PD ...................................T65
TDS402A11900 WP20PD ...................................T65
TDS402A11908 WP20PD ...................................T65
TDS402A12000 WP20PD ...................................T65
TDS402A12100 WP20PD ...................................T65
TDS402A12200 WP20PD ...................................T65
TDS402A12300 WP20PD ...................................T65
TDS402A12304 WP20PD ...................................T65
TDS402A12400 WP20PD ...................................T65
TDS402A12500 WP20PD ...................................T65
TDS402A12600 WP20PD ...................................T65
TDS402A12700 WP20PD ...................................T65
TDS402A12800 WP20PD ...................................T65
TDS402A12900 WP20PD ...................................T65
TDS402A13000 WP20PD ...................................T65
TDS402A13096 WP20PD ...................................T65
TDS402A13100 WP20PD ...................................T65
TDS402A13200 WP20PD ...................................T66
TDS402A13300 WP20PD ...................................T66
TDS402A13400 WP20PD ...................................T66
TDS402A13500 WP20PD ...................................T66
TDS402A13600 WP20PD ...................................T66
TDS402A13700 WP20PD ...................................T66
TDS402A13800 WP20PD ...................................T66
TDS402A13891 WP20PD ...................................T66
TDS402A13900 WP20PD ...................................T66
TDS402A14000 WP20PD ...................................T66
TDS402A14100 WP20PD ...................................T66
TDS402A14200 WP20PD ...................................T66
TDS402A14288 WP20PD ...................................T66
TDS402A14300 WP20PD ...................................T66
TDS402A14400 WP20PD ...................................T66
TDS402A14500 WP20PD ...................................T66
TDS402A14600 WP20PD ...................................T66
TDS402A14684 WP20PD ...................................T66
TDS402A14700 WP20PD ...................................T66
TDS402A14800 WP20PD ...................................T66
TDS402A14900 WP20PD ...................................T66
TDS402A15000 WP20PD ...................................T66
TDS402A15083 WP20PD ...................................T66
TDS402A15100 WP20PD ...................................T66
TDS402A15200 WP20PD ...................................T66
TDS402A15300 WP20PD ...................................T66
TDS402A15400 WP20PD ...................................T66
TDS402A15479 WP20PD ...................................T66
TDS402A15500 WP20PD ...................................T66
TDS402A15600 WP20PD ...................................T66
TDS402A15700 WP20PD ...................................T66
TDS402A15800 WP20PD ...................................T66
TDS402A15875 WP20PD ...................................T66
TDS402A15900 WP20PD ...................................T66
TDS402A16000 WP20PD ...................................T66
TDS402A16100 WP20PD ...................................T66
TDS402A16200 WP20PD ...................................T66
TDS402A16271 WP20PD ...................................T66
TDS402A16300 WP20PD ...................................T66
TDS402A16400 WP20PD ...................................T66
TDS402A16500 WP20PD ...................................T67
TDS402A16600 WP20PD ...................................T67
TDS402A16670 WP20PD ...................................T67
TDS402A16700 WP20PD ...................................T67
TDS402A16800 WP20PD ...................................T67
TDS402A16900 WP20PD ...................................T67
TDS402A17000 WP20PD ...................................T67
TDS402A17100 WP20PD ...................................T67
TDS402A17200 WP20PD ...................................T67
TDS402A17300 WP20PD ...................................T67
TDS402A17400 WP20PD ...................................T67
TDS402A17463 WP20PD ...................................T67
TDS402A17500 WP20PD ...................................T67
TDS402A17600 WP20PD ...................................T67
TDS402A17700 WP20PD ...................................T67
TDS402A17800 WP20PD ...................................T67
TDS402A17859 WP20PD ...................................T67
TDS402A17900 WP20PD ...................................T67
TDS402A18000 WP20PD ...................................T67
TDS402A18100 WP20PD ...................................T67
TDS402A18200 WP20PD ...................................T67
TDS402A18258 WP20PD ...................................T67
TDS402A18300 WP20PD ...................................T67
TDS402A18400 WP20PD ...................................T67
TDS402A18500 WP20PD ...................................T67
TDS402A18600 WP20PD ...................................T67
TDS402A18654 WP20PD ...................................T67
TDS402A18700 WP20PD ...................................T67
TDS402A18800 WP20PD ...................................T67
TDS402A18900 WP20PD ...................................T67
TDS402A19000 WP20PD ...................................T67
TDS402A19050 WP20PD ...................................T67
TDS402A19100 WP20PD ...................................T67
TDS402A19200 WP20PD ...................................T67
TDS402A19300 WP20PD ...................................T67
TDS402A19400 WP20PD ...................................T67
TDS402A19500 WP20PD ...................................T67
TDS402A19600 WP20PD ...................................T67
TDS402A19700 WP20PD ...................................T67
TDS402A19800 WP20PD ...................................T67
TDS402A19900 WP20PD ...................................T67
TDS402A20000 WP20PD ...................................T67
TDS403A03000 WP20PD ...................................T68
TDS403A03048 WP20PD ...................................T68
TDS403A03100 WP20PD ...................................T68
TDS403A03175 WP20PD ...................................T68
TDS403A03200 WP20PD ...................................T68
TDS403A03264 WP20PD ...................................T68
TDS403A03300 WP20PD ...................................T68
TDS403A03400 WP20PD ...................................T68
TDS403A03455 WP20PD ...................................T68
TDS403A03500 WP20PD ...................................T68
TDS403A03571 WP20PD ...................................T68
TDS403A03600 WP20PD ...................................T68
TDS403A03658 WP20PD ...................................T68
TDS403A03700 WP20PD ...................................T68
TDS403A03734 WP20PD ...................................T68
TDS403A03800 WP20PD ...................................T68
TDS403A03900 WP20PD ...................................T68
TDS403A03970 WP20PD ...................................T68
TDS403A04000 WP20PD ...................................T68
TDS403A04039 WP20PD ...................................T68
TDS403A04090 WP20PD ...................................T68
TDS403A04100 WP20PD ...................................T68
TDS403A04200 WP20PD ...................................T68
TDS403A04217 WP20PD ...................................T68
TDS403A04300 WP20PD ...................................T68
TDS403A04366 WP20PD ...................................T68
TDS403A04400 WP20PD ...................................T68
TDS403A04500 WP20PD ...................................T68
TDS403A04600 WP20PD ...................................T69
TDS403A04623 WP20PD ...................................T69
TDS403A04700 WP20PD ...................................T69
TDS403A04763 WP20PD ...................................T69
TDS403A04800 WP20PD ...................................T69
TDS403A04852 WP20PD ...................................T69
TDS403A04900 WP20PD ...................................T69
TDS403A05000 WP20PD ...................................T69
TDS403A05100 WP20PD ...................................T69
TDS403A05106 WP20PD ...................................T69
TDS403A05159 WP20PD ...................................T69
TDS403A05200 WP20PD ...................................T69
TDS403A05300 WP20PD ...................................T69
TDS403A05400 WP20PD ...................................T69
TDS403A05410 WP20PD ...................................T69
TDS403A05500 WP20PD ...................................T69
TDS403A05558 WP20PD ...................................T69
TDS403A05600 WP20PD ...................................T69
TDS403A05616 WP20PD ...................................T69
TDS403A05700 WP20PD ...................................T69
TDS403A05800 WP20PD ...................................T69
TDS403A05900 WP20PD ...................................T69
TDS403A05954 WP20PD ...................................T69
TDS403A06000 WP20PD ...................................T69
TDS403A06100 WP20PD ...................................T69
TDS403A06200 WP20PD ...................................T69
TDS403A06300 WP20PD ...................................T69
TDS403A06350 WP20PD ...................................T69
TDS403A06400 WP20PD ...................................T69
TDS403A06500 WP20PD ...................................T69
TDS403A06528 WP20PD ...................................T69
TDS403A06600 WP20PD ...................................T69
TDS403A06630 WP20PD ...................................T69
TDS403A06700 WP20PD ...................................T69
TDS403A06746 WP20PD ...................................T69
TDS403A06800 WP20PD ...................................T69
TDS403A06900 WP20PD ...................................T69
TDS403A07000 WP20PD ...................................T69
TDS403A07100 WP20PD ...................................T69
TDS403A07145 WP20PD ...................................T69
TDS403A07200 WP20PD ...................................T70
TDS403A07300 WP20PD ...................................T70
TDS403A07400 WP20PD ...................................T70
TDS403A07500 WP20PD ...................................T70
TDS403A07541 WP20PD ...................................T70
TDS403A07600 WP20PD ...................................T70
TDS403A07700 WP20PD ...................................T70
TDS403A07800 WP20PD ...................................T70
TDS403A07900 WP20PD ...................................T70
TDS403A07938 WP20PD ...................................T70
TDS403A08000 WP20PD ...................................T70
TDS403A08100 WP20PD ...................................T70
TDS403A08200 WP20PD ...................................T70
TDS403A08300 WP20PD ...................................T70
TDS403A08334 WP20PD ...................................T70
TDS403A08400 WP20PD ...................................T70
TDS403A08433 WP20PD ...................................T70
TDS403A08500 WP20PD ...................................T70
TDS403A08600 WP20PD ...................................T70
TDS403A08700 WP20PD ...................................T70
TDS403A08733 WP20PD ...................................T70
TDS403A08800 WP20PD ...................................T70
TDS403A08900 WP20PD ...................................T70
TDS403A09000 WP20PD ...................................T70
TDS403A09100 WP20PD ...................................T70
TDS403A09129 WP20PD ...................................T70
TDS403A09200 WP20PD ...................................T70
TDS403A09300 WP20PD ...................................T70
TDS403A09347 WP20PD ...................................T70
TDS403A09400 WP20PD ...................................T70
TDS403A09500 WP20PD ...................................T70
TDS403A09525 WP20PD ...................................T70
TDS403A09600 WP20PD ...................................T70
TDS403A09700 WP20PD ...................................T70
TDS403A09800 WP20PD ...................................T70
TDS403A09900 WP20PD ...................................T70
TDS403A09921 WP20PD ...................................T70
TDS403A10000 WP20PD ...................................T70
TDS403A10100 WP20PD ...................................T70
TDS403A10200 WP20PD ...................................T70
TDS403A10300 WP20PD ...................................T71
TDS403A10320 WP20PD ...................................T71
TDS403A10400 WP20PD ...................................T71
TDS403A10500 WP20PD ...................................T71
TDS403A10600 WP20PD ...................................T71
TDS403A10700 WP20PD ...................................T71
TDS403A10716 WP20PD ...................................T71
TDS403A10800 WP20PD ...................................T71
TDS403A10900 WP20PD ...................................T71
TDS403A11000 WP20PD ...................................T71
TDS403A11100 WP20PD ...................................T71
TDS403A11113 WP20PD ...................................T71
TDS403A11200 WP20PD ...................................T71
TDS403A11300 WP20PD ...................................T71
TDS403A11400 WP20PD ...................................T71
TDS403A11500 WP20PD ...................................T71
TDS403A11509 WP20PD ...................................T71
TDS403A11600 WP20PD ...................................T71
TDS403A11700 WP20PD ...................................T71
TDS403A11800 WP20PD ...................................T71
TDS403A11900 WP20PD ...................................T71
TDS403A11908 WP20PD ...................................T71
TDS403A12000 WP20PD ...................................T71
TDS403A12100 WP20PD ...................................T71
TDS403A12200 WP20PD ...................................T71
TDS403A12300 WP20PD ...................................T71
TDS403A12304 WP20PD ...................................T71
TDS403A12400 WP20PD ...................................T71
TDS403A12500 WP20PD ...................................T71
TDS403A12600 WP20PD ...................................T71
TDS403A12700 WP20PD ...................................T71
TDS403A12800 WP20PD ...................................T71
TDS403A12900 WP20PD ...................................T71
TDS403A13000 WP20PD ...................................T71
TDS403A13096 WP20PD ...................................T71
TDS403A13100 WP20PD ...................................T71
TDS403A13200 WP20PD ...................................T71
TDS403A13300 WP20PD ...................................T71
TDS403A13400 WP20PD ...................................T71
TDS403A13500 WP20PD ...................................T71
TDS403A13600 WP20PD ...................................T72
TDS403A13700 WP20PD ...................................T72
TDS403A13800 WP20PD ...................................T72
TDS403A13891 WP20PD ...................................T72
TDS403A13900 WP20PD ...................................T72
TDS403A14000 WP20PD ...................................T72
TDS403A14100 WP20PD ...................................T72
TDS403A14200 WP20PD ...................................T72
Catalogue No. Page(s) Catalogue No. Page(s) Catalogue No. Page(s)
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 124 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRANDO b 28 20153 09PM
Z125
widia.com
Index by Catalogue Number
Catalogue No. Page(s)
TDS403A14288 WP20PD ...................................T72
TDS403A14300 WP20PD ...................................T72
TDS403A14400 WP20PD ...................................T72
TDS403A14500 WP20PD ...................................T72
TDS403A14600 WP20PD ...................................T72
TDS403A14684 WP20PD ...................................T72
TDS403A14700 WP20PD ...................................T72
TDS403A14800 WP20PD ...................................T72
TDS403A14900 WP20PD ...................................T72
TDS403A15000 WP20PD ...................................T72
TDS403A15083 WP20PD ...................................T72
TDS403A15100 WP20PD ...................................T72
TDS403A15200 WP20PD ...................................T72
TDS403A15300 WP20PD ...................................T72
TDS403A15400 WP20PD ...................................T72
TDS403A15479 WP20PD ...................................T72
TDS403A15500 WP20PD ...................................T72
TDS403A15600 WP20PD ...................................T72
TDS403A15700 WP20PD ...................................T72
TDS403A15800 WP20PD ...................................T72
TDS403A15875 WP20PD ...................................T72
TDS403A15900 WP20PD ...................................T72
TDS403A16000 WP20PD ...................................T72
TDS403A16100 WP20PD ...................................T72
TDS403A16200 WP20PD ...................................T72
TDS403A16271 WP20PD ...................................T72
TDS403A16300 WP20PD ...................................T72
TDS403A16400 WP20PD ...................................T72
TDS403A16500 WP20PD ...................................T72
TDS403A16600 WP20PD ...................................T72
TDS403A16670 WP20PD ...................................T72
TDS403A16700 WP20PD ...................................T72
TDS403A16800 WP20PD ...................................T73
TDS403A16900 WP20PD ...................................T73
TDS403A17000 WP20PD ...................................T73
TDS403A17100 WP20PD ...................................T73
TDS403A17200 WP20PD ...................................T73
TDS403A17300 WP20PD ...................................T73
TDS403A17400 WP20PD ...................................T73
TDS403A17463 WP20PD ...................................T73
TDS403A17500 WP20PD ...................................T73
TDS403A17600 WP20PD ...................................T73
TDS403A17700 WP20PD ...................................T73
TDS403A17800 WP20PD ...................................T73
TDS403A17859 WP20PD ...................................T73
TDS403A17900 WP20PD ...................................T73
TDS403A18000 WP20PD ...................................T73
TDS403A18100 WP20PD ...................................T73
TDS403A18200 WP20PD ...................................T73
TDS403A18258 WP20PD ...................................T73
TDS403A18300 WP20PD ...................................T73
TDS403A18400 WP20PD ...................................T73
TDS403A18500 WP20PD ...................................T73
TDS403A18600 WP20PD ...................................T73
TDS403A18654 WP20PD ...................................T73
TDS403A18700 WP20PD ...................................T73
TDS403A18800 WP20PD ...................................T73
TDS403A18900 WP20PD ...................................T73
TDS403A19000 WP20PD ...................................T73
TDS403A19050 WP20PD ...................................T73
TDS403A19100 WP20PD ...................................T73
TDS403A19200 WP20PD ...................................T73
TDS403A19300 WP20PD ...................................T73
TDS403A19400 WP20PD ...................................T73
TDS403A19500 WP20PD ...................................T73
TDS403A19600 WP20PD ...................................T73
TDS403A19700 WP20PD ...................................T73
TDS403A19800 WP20PD ...................................T73
TDS403A19900 WP20PD ...................................T73
TDS403A20000 WP20PD ...................................T73
TDS411A03000 WK15PD ...................................T56
TDS411A03048 WK15PD ...................................T56
TDS411A03100 WK15PD ...................................T56
TDS411A03175 WK15PD ...................................T56
TDS411A03200 WK15PD ...................................T56
TDS411A03264 WK15PD ...................................T56
TDS411A03300 WK15PD ...................................T56
TDS411A03400 WK15PD ...................................T56
TDS411A03455 WK15PD ...................................T56
TDS411A03500 WK15PD ...................................T56
TDS411A03571 WK15PD ...................................T56
TDS411A03600 WK15PD ...................................T56
TDS411A03658 WK15PD ...................................T56
TDS411A03700 WK15PD ...................................T56
TDS411A03734 WK15PD ...................................T56
TDS411A03800 WK15PD ...................................T56
TDS411A03900 WK15PD ...................................T56
TDS411A03970 WK15PD ...................................T56
TDS411A04000 WK15PD ...................................T56
TDS411A04039 WK15PD ...................................T56
TDS411A04090 WK15PD ...................................T56
TDS411A04100 WK15PD ...................................T56
TDS411A04200 WK15PD ...................................T56
TDS411A04217 WK15PD ...................................T56
TDS411A04300 WK15PD ...................................T57
TDS411A04366 WK15PD ...................................T57
TDS411A04400 WK15PD ...................................T57
TDS411A04500 WK15PD ...................................T57
TDS411A04600 WK15PD ...................................T57
TDS411A04623 WK15PD ...................................T57
TDS411A04700 WK15PD ...................................T57
TDS411A04763 WK15PD ...................................T57
TDS411A04800 WK15PD ...................................T57
TDS411A04852 WK15PD ...................................T57
TDS411A04900 WK15PD ...................................T57
TDS411A05000 WK15PD ...................................T57
TDS411A05100 WK15PD ...................................T57
TDS411A05106 WK15PD ...................................T57
TDS411A05159 WK15PD ...................................T57
TDS411A05200 WK15PD ...................................T57
TDS411A05300 WK15PD ...................................T57
TDS411A05400 WK15PD ...................................T57
TDS411A05410 WK15PD ...................................T57
TDS411A05500 WK15PD ...................................T57
TDS411A05558 WK15PD ...................................T57
TDS411A05600 WK15PD ...................................T57
TDS411A05616 WK15PD ...................................T57
TDS411A05700 WK15PD ...................................T57
TDS411A05800 WK15PD ...................................T57
TDS411A05900 WK15PD ...................................T57
TDS411A05954 WK15PD ...................................T57
TDS411A06000 WK15PD ...................................T57
TDS411A06100 WK15PD ...................................T57
TDS411A06200 WK15PD ...................................T57
TDS411A06300 WK15PD ...................................T57
TDS411A06350 WK15PD ...................................T57
TDS411A06400 WK15PD ...................................T57
TDS411A06500 WK15PD ...................................T57
TDS411A06528 WK15PD ...................................T57
TDS411A06600 WK15PD ...................................T57
TDS411A06630 WK15PD ...................................T57
TDS411A06700 WK15PD ...................................T57
TDS411A06746 WK15PD ...................................T57
TDS411A06800 WK15PD ...................................T57
TDS411A06900 WK15PD ...................................T58
TDS411A07000 WK15PD ...................................T58
TDS411A07100 WK15PD ...................................T58
TDS411A07145 WK15PD ...................................T58
TDS411A07200 WK15PD ...................................T58
TDS411A07300 WK15PD ...................................T58
TDS411A07400 WK15PD ...................................T58
TDS411A07500 WK15PD ...................................T58
TDS411A07541 WK15PD ...................................T58
TDS411A07600 WK15PD ...................................T58
TDS411A07700 WK15PD ...................................T58
TDS411A07800 WK15PD ...................................T58
TDS411A07900 WK15PD ...................................T58
TDS411A07938 WK15PD ...................................T58
TDS411A08000 WK15PD ...................................T58
TDS411A08100 WK15PD ...................................T58
TDS411A08200 WK15PD ...................................T58
TDS411A08300 WK15PD ...................................T58
TDS411A08334 WK15PD ...................................T58
TDS411A08400 WK15PD ...................................T58
TDS411A08433 WK15PD ...................................T58
TDS411A08500 WK15PD ...................................T58
TDS411A08600 WK15PD ...................................T58
TDS411A08700 WK15PD ...................................T58
TDS411A08733 WK15PD ...................................T58
TDS411A08800 WK15PD ...................................T58
TDS411A08900 WK15PD ...................................T58
TDS411A09000 WK15PD ...................................T58
TDS411A09100 WK15PD ...................................T58
TDS411A09129 WK15PD ...................................T58
TDS411A09200 WK15PD ...................................T58
TDS411A09300 WK15PD ...................................T58
TDS411A09347 WK15PD ...................................T58
TDS411A09400 WK15PD ...................................T58
TDS411A09500 WK15PD ...................................T58
TDS411A09525 WK15PD ...................................T58
TDS411A09600 WK15PD ...................................T58
TDS411A09700 WK15PD ...................................T58
TDS411A09800 WK15PD ...................................T58
TDS411A09900 WK15PD ...................................T58
TDS411A09921 WK15PD ...................................T59
TDS411A10000 WK15PD ...................................T59
TDS411A10100 WK15PD ...................................T59
TDS411A10200 WK15PD ...................................T59
TDS411A10300 WK15PD ...................................T59
TDS411A10320 WK15PD ...................................T59
TDS411A10400 WK15PD ...................................T59
TDS411A10500 WK15PD ...................................T59
TDS411A10600 WK15PD ...................................T59
TDS411A10700 WK15PD ...................................T59
TDS411A10716 WK15PD ...................................T59
TDS411A10800 WK15PD ...................................T59
TDS411A10900 WK15PD ...................................T59
TDS411A11000 WK15PD ...................................T59
TDS411A11100 WK15PD ...................................T59
TDS411A11113 WK15PD ...................................T59
TDS411A11200 WK15PD ...................................T59
TDS411A11300 WK15PD ...................................T59
TDS411A11400 WK15PD ...................................T59
TDS411A11500 WK15PD ...................................T59
TDS411A11509 WK15PD ...................................T59
TDS411A11600 WK15PD ...................................T59
TDS411A11700 WK15PD ...................................T59
TDS411A11800 WK15PD ...................................T59
TDS411A11900 WK15PD ...................................T59
TDS411A11908 WK15PD ...................................T59
TDS411A12000 WK15PD ...................................T59
TDS411A12100 WK15PD ...................................T59
TDS411A12200 WK15PD ...................................T59
TDS411A12300 WK15PD ...................................T59
TDS411A12304 WK15PD ...................................T59
TDS411A12400 WK15PD ...................................T59
TDS411A12500 WK15PD ...................................T59
TDS411A12600 WK15PD ...................................T59
TDS411A12700 WK15PD ...................................T59
TDS411A12800 WK15PD ...................................T59
TDS411A12900 WK15PD ...................................T59
TDS411A13000 WK15PD ...................................T59
TDS411A13096 WK15PD ...................................T59
TDS411A13100 WK15PD ...................................T59
TDS411A13200 WK15PD ...................................T60
TDS411A13300 WK15PD ...................................T60
TDS411A13400 WK15PD ...................................T60
TDS411A13500 WK15PD ...................................T60
TDS411A13600 WK15PD ...................................T60
TDS411A13700 WK15PD ...................................T60
TDS411A13800 WK15PD ...................................T60
TDS411A13891 WK15PD ...................................T60
TDS411A13900 WK15PD ...................................T60
TDS411A14000 WK15PD ...................................T60
TDS411A14100 WK15PD ...................................T60
TDS411A14200 WK15PD ...................................T60
TDS411A14288 WK15PD ...................................T60
TDS411A14300 WK15PD ...................................T60
TDS411A14400 WK15PD ...................................T60
TDS411A14500 WK15PD ...................................T60
TDS411A14600 WK15PD ...................................T60
TDS411A14684 WK15PD ...................................T60
TDS411A14700 WK15PD ...................................T60
TDS411A14800 WK15PD ...................................T60
TDS411A14900 WK15PD ...................................T60
TDS411A15000 WK15PD ...................................T60
TDS411A15083 WK15PD ...................................T60
TDS411A15100 WK15PD ...................................T60
TDS411A15200 WK15PD ...................................T60
TDS411A15300 WK15PD ...................................T60
TDS411A15400 WK15PD ...................................T60
TDS411A15479 WK15PD ...................................T60
TDS411A15500 WK15PD ...................................T60
TDS411A15600 WK15PD ...................................T60
TDS411A15700 WK15PD ...................................T60
TDS411A15800 WK15PD ...................................T60
TDS411A15875 WK15PD ...................................T60
TDS411A15900 WK15PD ...................................T60
TDS411A16000 WK15PD ...................................T60
TDS411A16100 WK15PD ...................................T60
TDS411A16200 WK15PD ...................................T60
TDS411A16271 WK15PD ...................................T60
TDS411A16300 WK15PD ...................................T60
TDS411A16400 WK15PD ...................................T60
TDS411A16500 WK15PD ...................................T61
TDS411A16600 WK15PD ...................................T61
TDS411A16670 WK15PD ...................................T61
TDS411A16700 WK15PD ...................................T61
TDS411A16800 WK15PD ...................................T61
TDS411A16900 WK15PD ...................................T61
TDS411A17000 WK15PD ...................................T61
TDS411A17100 WK15PD ...................................T61
TDS411A17200 WK15PD ...................................T61
TDS411A17300 WK15PD ...................................T61
TDS411A17400 WK15PD ...................................T61
TDS411A17463 WK15PD ...................................T61
TDS411A17500 WK15PD ...................................T61
TDS411A17600 WK15PD ...................................T61
TDS411A17700 WK15PD ...................................T61
TDS411A17800 WK15PD ...................................T61
TDS411A17859 WK15PD ...................................T61
TDS411A17900 WK15PD ...................................T61
Catalogue No. Page(s) Catalogue No. Page(s) Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 125 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRAND O b 28 2015 3 09 PM
Z126 widia.com
Index by Catalogue Number
Index
Catalogue No. Page(s)
TDS411A18000 WK15PD ...................................T61
TDS411A18100 WK15PD ...................................T61
TDS411A18200 WK15PD ...................................T61
TDS411A18258 WK15PD ...................................T61
TDS411A18300 WK15PD ...................................T61
TDS411A18400 WK15PD ...................................T61
TDS411A18500 WK15PD ...................................T61
TDS411A18600 WK15PD ...................................T61
TDS411A18654 WK15PD ...................................T61
TDS411A18700 WK15PD ...................................T61
TDS411A18800 WK15PD ...................................T61
TDS411A18900 WK15PD ...................................T61
TDS411A19000 WK15PD ...................................T61
TDS411A19050 WK15PD ...................................T61
TDS411A19100 WK15PD ...................................T61
TDS411A19200 WK15PD ...................................T61
TDS411A19300 WK15PD ...................................T61
TDS411A19400 WK15PD ...................................T61
TDS411A19500 WK15PD ...................................T61
TDS411A19600 WK15PD ...................................T61
TDS411A19700 WK15PD ...................................T61
TDS411A19800 WK15PD ...................................T61
TDS411A19900 WK15PD ...................................T61
TDS411A20000 WK15PD ...................................T61
TDS412A03000 WK15PD ...................................T62
TDS412A03048 WK15PD ...................................T62
TDS412A03100 WK15PD ...................................T62
TDS412A03175 WK15PD ...................................T62
TDS412A03200 WK15PD ...................................T62
TDS412A03264 WK15PD ...................................T62
TDS412A03300 WK15PD ...................................T62
TDS412A03400 WK15PD ...................................T62
TDS412A03455 WK15PD ...................................T62
TDS412A03500 WK15PD ...................................T62
TDS412A03571 WK15PD ...................................T62
TDS412A03600 WK15PD ...................................T62
TDS412A03658 WK15PD ...................................T62
TDS412A03700 WK15PD ...................................T62
TDS412A03734 WK15PD ...................................T62
TDS412A03800 WK15PD ...................................T62
TDS412A03900 WK15PD ...................................T62
TDS412A03970 WK15PD ...................................T62
TDS412A04000 WK15PD ...................................T62
TDS412A04039 WK15PD ...................................T62
TDS412A04090 WK15PD ...................................T62
TDS412A04100 WK15PD ...................................T62
TDS412A04200 WK15PD ...................................T62
TDS412A04217 WK15PD ...................................T62
TDS412A04300 WK15PD ...................................T63
TDS412A04366 WK15PD ...................................T63
TDS412A04400 WK15PD ...................................T63
TDS412A04500 WK15PD ...................................T63
TDS412A04600 WK15PD ...................................T63
TDS412A04623 WK15PD ...................................T63
TDS412A04700 WK15PD ...................................T63
TDS412A04763 WK15PD ...................................T63
TDS412A04800 WK15PD ...................................T63
TDS412A04852 WK15PD ...................................T63
TDS412A04900 WK15PD ...................................T63
TDS412A05000 WK15PD ...................................T63
TDS412A05100 WK15PD ...................................T63
TDS412A05106 WK15PD ...................................T63
TDS412A05159 WK15PD ...................................T63
TDS412A05200 WK15PD ...................................T63
TDS412A05300 WK15PD ...................................T63
TDS412A05400 WK15PD ...................................T63
TDS412A05410 WK15PD ...................................T63
TDS412A05500 WK15PD ...................................T63
TDS412A05558 WK15PD ...................................T63
TDS412A05600 WK15PD ...................................T63
TDS412A05616 WK15PD ...................................T63
TDS412A05700 WK15PD ...................................T63
TDS412A05800 WK15PD ...................................T63
TDS412A05900 WK15PD ...................................T63
TDS412A05954 WK15PD ...................................T63
TDS412A06000 WK15PD ...................................T63
TDS412A06100 WK15PD ...................................T63
TDS412A06200 WK15PD ...................................T63
TDS412A06300 WK15PD ...................................T63
TDS412A06350 WK15PD ...................................T63
TDS412A06400 WK15PD ...................................T63
TDS412A06500 WK15PD ...................................T63
TDS412A06528 WK15PD ...................................T63
TDS412A06600 WK15PD ...................................T63
TDS412A06630 WK15PD ...................................T63
TDS412A06700 WK15PD ...................................T63
TDS412A06746 WK15PD ...................................T63
TDS412A06800 WK15PD ...................................T63
TDS412A06900 WK15PD ...................................T64
TDS412A07000 WK15PD ...................................T64
TDS412A07100 WK15PD ...................................T64
TDS412A07145 WK15PD ...................................T64
TDS412A07200 WK15PD ...................................T64
TDS412A07300 WK15PD ...................................T64
TDS412A07400 WK15PD ...................................T64
TDS412A07500 WK15PD ...................................T64
TDS412A07541 WK15PD ...................................T64
TDS412A07600 WK15PD ...................................T64
TDS412A07700 WK15PD ...................................T64
TDS412A07800 WK15PD ...................................T64
TDS412A07900 WK15PD ...................................T64
TDS412A07938 WK15PD ...................................T64
TDS412A08000 WK15PD ...................................T64
TDS412A08100 WK15PD ...................................T64
TDS412A08200 WK15PD ...................................T64
TDS412A08300 WK15PD ...................................T64
TDS412A08334 WK15PD ...................................T64
TDS412A08400 WK15PD ...................................T64
TDS412A08433 WK15PD ...................................T64
TDS412A08500 WK15PD ...................................T64
TDS412A08600 WK15PD ...................................T64
TDS412A08700 WK15PD ...................................T64
TDS412A08733 WK15PD ...................................T64
TDS412A08800 WK15PD ...................................T64
TDS412A08900 WK15PD ...................................T64
TDS412A09000 WK15PD ...................................T64
TDS412A09100 WK15PD ...................................T64
TDS412A09129 WK15PD ...................................T64
TDS412A09200 WK15PD ...................................T64
TDS412A09300 WK15PD ...................................T64
TDS412A09347 WK15PD ...................................T64
TDS412A09400 WK15PD ...................................T64
TDS412A09500 WK15PD ...................................T64
TDS412A09525 WK15PD ...................................T64
TDS412A09600 WK15PD ...................................T64
TDS412A09700 WK15PD ...................................T64
TDS412A09800 WK15PD ...................................T64
TDS412A09900 WK15PD ...................................T64
TDS412A09921 WK15PD ...................................T65
TDS412A10000 WK15PD ...................................T65
TDS412A10100 WK15PD ...................................T65
TDS412A10200 WK15PD ...................................T65
TDS412A10300 WK15PD ...................................T65
TDS412A10320 WK15PD ...................................T65
TDS412A10400 WK15PD ...................................T65
TDS412A10500 WK15PD ...................................T65
TDS412A10600 WK15PD ...................................T65
TDS412A10700 WK15PD ...................................T65
TDS412A10716 WK15PD ...................................T65
TDS412A10800 WK15PD ...................................T65
TDS412A10900 WK15PD ...................................T65
TDS412A11000 WK15PD ...................................T65
TDS412A11100 WK15PD ...................................T65
TDS412A11113 WK15PD ...................................T65
TDS412A11200 WK15PD ...................................T65
TDS412A11300 WK15PD ...................................T65
TDS412A11400 WK15PD ...................................T65
TDS412A11500 WK15PD ...................................T65
TDS412A11509 WK15PD ...................................T65
TDS412A11600 WK15PD ...................................T65
TDS412A11700 WK15PD ...................................T65
TDS412A11800 WK15PD ...................................T65
TDS412A11900 WK15PD ...................................T65
TDS412A11908 WK15PD ...................................T65
TDS412A12000 WK15PD ...................................T65
TDS412A12100 WK15PD ...................................T65
TDS412A12200 WK15PD ...................................T65
TDS412A12300 WK15PD ...................................T65
TDS412A12304 WK15PD ...................................T65
TDS412A12400 WK15PD ...................................T65
TDS412A12500 WK15PD ...................................T65
TDS412A12600 WK15PD ...................................T65
TDS412A12700 WK15PD ...................................T65
TDS412A12800 WK15PD ...................................T65
TDS412A12900 WK15PD ...................................T65
TDS412A13000 WK15PD ...................................T65
TDS412A13096 WK15PD ...................................T65
TDS412A13100 WK15PD ...................................T65
TDS412A13200 WK15PD ...................................T66
TDS412A13300 WK15PD ...................................T66
TDS412A13400 WK15PD ...................................T66
TDS412A13500 WK15PD ...................................T66
TDS412A13600 WK15PD ...................................T66
TDS412A13700 WK15PD ...................................T66
TDS412A13800 WK15PD ...................................T66
TDS412A13891 WK15PD ...................................T66
TDS412A13900 WK15PD ...................................T66
TDS412A14000 WK15PD ...................................T66
TDS412A14100 WK15PD ...................................T66
TDS412A14200 WK15PD ...................................T66
TDS412A14288 WK15PD ...................................T66
TDS412A14300 WK15PD ...................................T66
TDS412A14400 WK15PD ...................................T66
TDS412A14500 WK15PD ...................................T66
TDS412A14600 WK15PD ...................................T66
TDS412A14684 WK15PD ...................................T66
TDS412A14700 WK15PD ...................................T66
TDS412A14800 WK15PD ...................................T66
TDS412A14900 WK15PD ...................................T66
TDS412A15000 WK15PD ...................................T66
TDS412A15083 WK15PD ...................................T66
TDS412A15100 WK15PD ...................................T66
TDS412A15200 WK15PD ...................................T66
TDS412A15300 WK15PD ...................................T66
TDS412A15400 WK15PD ...................................T66
TDS412A15479 WK15PD ...................................T66
TDS412A15500 WK15PD ...................................T66
TDS412A15600 WK15PD ...................................T66
TDS412A15700 WK15PD ...................................T66
TDS412A15800 WK15PD ...................................T66
TDS412A15875 WK15PD ...................................T66
TDS412A15900 WK15PD ...................................T66
TDS412A16000 WK15PD ...................................T66
TDS412A16100 WK15PD ...................................T66
TDS412A16200 WK15PD ...................................T66
TDS412A16271 WK15PD ...................................T66
TDS412A16300 WK15PD ...................................T66
TDS412A16400 WK15PD ...................................T66
TDS412A16500 WK15PD ...................................T67
TDS412A16600 WK15PD ...................................T67
TDS412A16670 WK15PD ...................................T67
TDS412A16700 WK15PD ...................................T67
TDS412A16800 WK15PD ...................................T67
TDS412A16900 WK15PD ...................................T67
TDS412A17000 WK15PD ...................................T67
TDS412A17100 WK15PD ...................................T67
TDS412A17200 WK15PD ...................................T67
TDS412A17300 WK15PD ...................................T67
TDS412A17400 WK15PD ...................................T67
TDS412A17463 WK15PD ...................................T67
TDS412A17500 WK15PD ...................................T67
TDS412A17600 WK15PD ...................................T67
TDS412A17700 WK15PD ...................................T67
TDS412A17800 WK15PD ...................................T67
TDS412A17859 WK15PD ...................................T67
TDS412A17900 WK15PD ...................................T67
TDS412A18000 WK15PD ...................................T67
TDS412A18100 WK15PD ...................................T67
TDS412A18200 WK15PD ...................................T67
TDS412A18258 WK15PD ...................................T67
TDS412A18300 WK15PD ...................................T67
TDS412A18400 WK15PD ...................................T67
TDS412A18500 WK15PD ...................................T67
TDS412A18600 WK15PD ...................................T67
TDS412A18654 WK15PD ...................................T67
TDS412A18700 WK15PD ...................................T67
TDS412A18800 WK15PD ...................................T67
TDS412A18900 WK15PD ...................................T67
TDS412A19000 WK15PD ...................................T67
TDS412A19050 WK15PD ...................................T67
TDS412A19100 WK15PD ...................................T67
TDS412A19200 WK15PD ...................................T67
TDS412A19300 WK15PD ...................................T67
TDS412A19400 WK15PD ...................................T67
TDS412A19500 WK15PD ...................................T67
TDS412A19600 WK15PD ...................................T67
TDS412A19700 WK15PD ...................................T67
TDS412A19800 WK15PD ...................................T67
TDS412A19900 WK15PD ...................................T67
TDS412A20000 WK15PD ...................................T67
TDS413A03000 WK15PD ...................................T68
TDS413A03048 WK15PD ...................................T68
TDS413A03100 WK15PD ...................................T68
TDS413A03175 WK15PD ...................................T68
TDS413A03200 WK15PD ...................................T68
TDS413A03264 WK15PD ...................................T68
TDS413A03300 WK15PD ...................................T68
TDS413A03400 WK15PD ...................................T68
TDS413A03455 WK15PD ...................................T68
TDS413A03500 WK15PD ...................................T68
TDS413A03571 WK15PD ...................................T68
TDS413A03600 WK15PD ...................................T68
TDS413A03658 WK15PD ...................................T68
TDS413A03700 WK15PD ...................................T68
TDS413A03734 WK15PD ...................................T68
TDS413A03800 WK15PD ...................................T68
TDS413A03900 WK15PD ...................................T68
TDS413A03970 WK15PD ...................................T68
TDS413A04000 WK15PD ...................................T68
TDS413A04039 WK15PD ...................................T68
TDS413A04090 WK15PD ...................................T68
TDS413A04100 WK15PD ...................................T68
Catalogue No. Page(s) Catalogue No. Page(s) Catalogue No. Page(s)
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 126 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRANDO b 28 20153 09PM
Z127
widia.com
Index by Catalogue Number
Catalogue No. Page(s)
TDS413A04200 WK15PD ...................................T68
TDS413A04217 WK15PD ...................................T68
TDS413A04300 WK15PD ...................................T68
TDS413A04366 WK15PD ...................................T68
TDS413A04400 WK15PD ...................................T68
TDS413A04500 WK15PD ...................................T68
TDS413A04600 WK15PD ...................................T69
TDS413A04623 WK15PD ...................................T69
TDS413A04700 WK15PD ...................................T69
TDS413A04763 WK15PD ...................................T69
TDS413A04800 WK15PD ...................................T69
TDS413A04852 WK15PD ...................................T69
TDS413A04900 WK15PD ...................................T69
TDS413A05000 WK15PD ...................................T69
TDS413A05100 WK15PD ...................................T69
TDS413A05106 WK15PD ...................................T69
TDS413A05159 WK15PD ...................................T69
TDS413A05200 WK15PD ...................................T69
TDS413A05300 WK15PD ...................................T69
TDS413A05400 WK15PD ...................................T69
TDS413A05410 WK15PD ...................................T69
TDS413A05500 WK15PD ...................................T69
TDS413A05558 WK15PD ...................................T69
TDS413A05600 WK15PD ...................................T69
TDS413A05616 WK15PD ...................................T69
TDS413A05700 WK15PD ...................................T69
TDS413A05800 WK15PD ...................................T69
TDS413A05900 WK15PD ...................................T69
TDS413A05954 WK15PD ...................................T69
TDS413A06000 WK15PD ...................................T69
TDS413A06100 WK15PD ...................................T69
TDS413A06200 WK15PD ...................................T69
TDS413A06300 WK15PD ...................................T69
TDS413A06350 WK15PD ...................................T69
TDS413A06400 WK15PD ...................................T69
TDS413A06500 WK15PD ...................................T69
TDS413A06528 WK15PD ...................................T69
TDS413A06600 WK15PD ...................................T69
TDS413A06630 WK15PD ...................................T69
TDS413A06700 WK15PD ...................................T69
TDS413A06746 WK15PD ...................................T69
TDS413A06800 WK15PD ...................................T69
TDS413A06900 WK15PD ...................................T69
TDS413A07000 WK15PD ...................................T69
TDS413A07100 WK15PD ...................................T69
TDS413A07145 WK15PD ...................................T69
TDS413A07200 WK15PD ...................................T70
TDS413A07300 WK15PD ...................................T70
TDS413A07400 WK15PD ...................................T70
TDS413A07500 WK15PD ...................................T70
TDS413A07541 WK15PD ...................................T70
TDS413A07600 WK15PD ...................................T70
TDS413A07700 WK15PD ...................................T70
TDS413A07800 WK15PD ...................................T70
TDS413A07900 WK15PD ...................................T70
TDS413A07938 WK15PD ...................................T70
TDS413A08000 WK15PD ...................................T70
TDS413A08100 WK15PD ...................................T70
TDS413A08200 WK15PD ...................................T70
TDS413A08300 WK15PD ...................................T70
TDS413A08334 WK15PD ...................................T70
TDS413A08400 WK15PD ...................................T70
TDS413A08433 WK15PD ...................................T70
TDS413A08500 WK15PD ...................................T70
TDS413A08600 WK15PD ...................................T70
TDS413A08700 WK15PD ...................................T70
TDS413A08733 WK15PD ...................................T70
TDS413A08800 WK15PD ...................................T70
TDS413A08900 WK15PD ...................................T70
TDS413A09000 WK15PD ...................................T70
TDS413A09100 WK15PD ...................................T70
TDS413A09129 WK15PD ...................................T70
TDS413A09200 WK15PD ...................................T70
TDS413A09300 WK15PD ...................................T70
TDS413A09347 WK15PD ...................................T70
TDS413A09400 WK15PD ...................................T70
TDS413A09500 WK15PD ...................................T70
TDS413A09525 WK15PD ...................................T70
TDS413A09600 WK15PD ...................................T70
TDS413A09700 WK15PD ...................................T70
TDS413A09800 WK15PD ...................................T70
TDS413A09900 WK15PD ...................................T70
TDS413A09921 WK15PD ...................................T70
TDS413A10000 WK15PD ...................................T70
TDS413A10100 WK15PD ...................................T70
TDS413A10200 WK15PD ...................................T70
TDS413A10300 WK15PD ...................................T71
TDS413A10320 WK15PD ...................................T71
TDS413A10400 WK15PD ...................................T71
TDS413A10500 WK15PD ...................................T71
TDS413A10600 WK15PD ...................................T71
TDS413A10700 WK15PD ...................................T71
TDS413A10716 WK15PD ...................................T71
TDS413A10800 WK15PD ...................................T71
TDS413A10900 WK15PD ...................................T71
TDS413A11000 WK15PD ...................................T71
TDS413A11100 WK15PD ...................................T71
TDS413A11113 WK15PD ...................................T71
TDS413A11200 WK15PD ...................................T71
TDS413A11300 WK15PD ...................................T71
TDS413A11400 WK15PD ...................................T71
TDS413A11500 WK15PD ...................................T71
TDS413A11509 WK15PD ...................................T71
TDS413A11600 WK15PD ...................................T71
TDS413A11700 WK15PD ...................................T71
TDS413A11800 WK15PD ...................................T71
TDS413A11900 WK15PD ...................................T71
TDS413A11908 WK15PD ...................................T71
TDS413A12000 WK15PD ...................................T71
TDS413A12100 WK15PD ...................................T71
TDS413A12200 WK15PD ...................................T71
TDS413A12300 WK15PD ...................................T71
TDS413A12304 WK15PD ...................................T71
TDS413A12400 WK15PD ...................................T71
TDS413A12500 WK15PD ...................................T71
TDS413A12600 WK15PD ...................................T71
TDS413A12700 WK15PD ...................................T71
TDS413A12800 WK15PD ...................................T71
TDS413A12900 WK15PD ...................................T71
TDS413A13000 WK15PD ...................................T71
TDS413A13096 WK15PD ...................................T71
TDS413A13100 WK15PD ...................................T71
TDS413A13200 WK15PD ...................................T71
TDS413A13300 WK15PD ...................................T71
TDS413A13400 WK15PD ...................................T71
TDS413A13500 WK15PD ...................................T71
TDS413A13600 WK15PD ...................................T72
TDS413A13700 WK15PD ...................................T72
TDS413A13800 WK15PD ...................................T72
TDS413A13891 WK15PD ...................................T72
TDS413A13900 WK15PD ...................................T72
TDS413A14000 WK15PD ...................................T72
TDS413A14100 WK15PD ...................................T72
TDS413A14200 WK15PD ...................................T72
TDS413A14288 WK15PD ...................................T72
TDS413A14300 WK15PD ...................................T72
TDS413A14400 WK15PD ...................................T72
TDS413A14500 WK15PD ...................................T72
TDS413A14600 WK15PD ...................................T72
TDS413A14684 WK15PD ...................................T72
TDS413A14700 WK15PD ...................................T72
TDS413A14800 WK15PD ...................................T72
TDS413A14900 WK15PD ...................................T72
TDS413A15000 WK15PD ...................................T72
TDS413A15083 WK15PD ...................................T72
TDS413A15100 WK15PD ...................................T72
TDS413A15200 WK15PD ...................................T72
TDS413A15300 WK15PD ...................................T72
TDS413A15400 WK15PD ...................................T72
TDS413A15479 WK15PD ...................................T72
TDS413A15500 WK15PD ...................................T72
TDS413A15600 WK15PD ...................................T72
TDS413A15700 WK15PD ...................................T72
TDS413A15800 WK15PD ...................................T72
TDS413A15875 WK15PD ...................................T72
TDS413A15900 WK15PD ...................................T72
TDS413A16000 WK15PD ...................................T72
TDS413A16100 WK15PD ...................................T72
TDS413A16200 WK15PD ...................................T72
TDS413A16271 WK15PD ...................................T72
TDS413A16300 WK15PD ...................................T72
TDS413A16400 WK15PD ...................................T72
TDS413A16500 WK15PD ...................................T72
TDS413A16600 WK15PD ...................................T72
TDS413A16670 WK15PD ...................................T72
TDS413A16700 WK15PD ...................................T72
TDS413A16800 WK15PD ...................................T73
TDS413A16900 WK15PD ...................................T73
TDS413A17000 WK15PD ...................................T73
TDS413A17100 WK15PD ...................................T73
TDS413A17200 WK15PD ...................................T73
TDS413A17300 WK15PD ...................................T73
TDS413A17400 WK15PD ...................................T73
TDS413A17463 WK15PD ...................................T73
TDS413A17500 WK15PD ...................................T73
TDS413A17600 WK15PD ...................................T73
TDS413A17700 WK15PD ...................................T73
TDS413A17800 WK15PD ...................................T73
TDS413A17859 WK15PD ...................................T73
TDS413A17900 WK15PD ...................................T73
TDS413A18000 WK15PD ...................................T73
TDS413A18100 WK15PD ...................................T73
TDS413A18200 WK15PD ...................................T73
TDS413A18258 WK15PD ...................................T73
TDS413A18300 WK15PD ...................................T73
TDS413A18400 WK15PD ...................................T73
TDS413A18500 WK15PD ...................................T73
TDS413A18600 WK15PD ...................................T73
TDS413A18654 WK15PD ...................................T73
TDS413A18700 WK15PD ...................................T73
TDS413A18800 WK15PD ...................................T73
TDS413A18900 WK15PD ...................................T73
TDS413A19000 WK15PD ...................................T73
TDS413A19050 WK15PD ...................................T73
TDS413A19100 WK15PD ...................................T73
TDS413A19200 WK15PD ...................................T73
TDS413A19300 WK15PD ...................................T73
TDS413A19400 WK15PD ...................................T73
TDS413A19500 WK15PD ...................................T73
TDS413A19600 WK15PD ...................................T73
TDS413A19700 WK15PD ...................................T73
TDS413A19800 WK15PD ...................................T73
TDS413A19900 WK15PD ...................................T73
TDS413A20000 WK15PD ...................................T73
TDS501A03000 WU25PD ...................................T82
TDS501A03100 WU25PD ...................................T82
TDS501A03175 WU25PD ...................................T82
TDS501A03200 WU25PD ...................................T82
TDS501A03250 WU25PD ...................................T82
TDS501A03300 WU25PD ...................................T82
TDS501A03400 WU25PD ...................................T82
TDS501A03455 WU25PD ...................................T82
TDS501A03500 WU25PD ...................................T82
TDS501A03571 WU25PD ...................................T82
TDS501A03600 WU25PD ...................................T82
TDS501A03700 WU25PD ...................................T82
TDS501A03800 WU25PD ...................................T82
TDS501A03900 WU25PD ...................................T82
TDS501A04000 WU25PD ...................................T82
TDS501A04100 WU25PD ...................................T82
TDS501A04200 WU25PD ...................................T82
TDS501A04300 WU25PD ...................................T82
TDS501A04370 WU25PD ...................................T82
TDS501A04400 WU25PD ...................................T82
TDS501A04500 WU25PD ...................................T82
TDS501A04600 WU25PD ...................................T82
TDS501A04623 WU25PD ...................................T82
TDS501A04650 WU25PD ...................................T82
TDS501A04700 WU25PD ...................................T83
TDS501A04763 WU25PD ...................................T83
TDS501A04800 WU25PD ...................................T83
TDS501A04900 WU25PD ...................................T83
TDS501A05000 WU25PD ...................................T83
TDS501A05100 WU25PD ...................................T83
TDS501A05160 WU25PD ...................................T83
TDS501A05200 WU25PD ...................................T83
TDS501A05300 WU25PD ...................................T83
TDS501A05400 WU25PD ...................................T83
TDS501A05410 WU25PD ...................................T83
TDS501A05500 WU25PD ...................................T83
TDS501A05550 WU25PD ...................................T83
TDS501A05558 WU25PD ...................................T83
TDS501A05600 WU25PD ...................................T83
TDS501A05700 WU25PD ...................................T83
TDS501A05800 WU25PD ...................................T83
TDS501A05900 WU25PD ...................................T83
TDS501A05950 WU25PD ...................................T83
TDS501A06000 WU25PD ...................................T83
TDS501A06100 WU25PD ...................................T83
TDS501A06200 WU25PD ...................................T83
TDS501A06300 WU25PD ...................................T83
TDS501A06350 WU25PD ...................................T83
TDS501A06400 WU25PD ...................................T83
TDS501A06500 WU25PD ...................................T83
TDS501A06528 WU25PD ...................................T83
TDS501A06600 WU25PD ...................................T83
TDS501A06700 WU25PD ...................................T83
TDS501A06746 WU25PD ...................................T83
TDS501A06800 WU25PD ...................................T83
TDS501A06900 WU25PD ...................................T83
TDS501A07000 WU25PD ...................................T83
TDS501A07100 WU25PD ...................................T83
TDS501A07145 WU25PD ...................................T83
TDS501A07200 WU25PD ...................................T83
TDS501A07300 WU25PD ...................................T83
TDS501A07400 WU25PD ...................................T83
TDS501A07500 WU25PD ...................................T83
TDS501A07541 WU25PD ...................................T83
TDS501A07600 WU25PD ...................................T84
TDS501A07700 WU25PD ...................................T84
TDS501A07800 WU25PD ...................................T84
TDS501A07900 WU25PD ...................................T84
Catalogue No. Page(s) Catalogue No. Page(s) Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 127 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRAND O b 28 2015 3 09 PM
Z128 widia.com
Index by Catalogue Number
Index
Catalogue No. Page(s)
TDS501A07938 WU25PD ...................................T84
TDS501A08000 WU25PD ...................................T84
TDS501A08100 WU25PD ...................................T84
TDS501A08200 WU25PD ...................................T84
TDS501A08300 WU25PD ...................................T84
TDS501A08334 WU25PD ...................................T84
TDS501A08400 WU25PD ...................................T84
TDS501A08433 WU25PD ...................................T84
TDS501A08500 WU25PD ...................................T84
TDS501A08600 WU25PD ...................................T84
TDS501A08700 WU25PD ...................................T84
TDS501A08733 WU25PD ...................................T84
TDS501A08800 WU25PD ...................................T84
TDS501A08900 WU25PD ...................................T84
TDS501A09000 WU25PD ...................................T84
TDS501A09100 WU25PD ...................................T84
TDS501A09129 WU25PD ...................................T84
TDS501A09200 WU25PD ...................................T84
TDS501A09300 WU25PD ...................................T84
TDS501A09347 WU25PD ...................................T84
TDS501A09400 WU25PD ...................................T84
TDS501A09500 WU25PD ...................................T84
TDS501A09600 WU25PD ...................................T84
TDS501A09700 WU25PD ...................................T84
TDS501A09750 WU25PD ...................................T84
TDS501A09800 WU25PD ...................................T84
TDS501A09900 WU25PD ...................................T84
TDS501A09921 WU25PD ...................................T84
TDS501A10000 WU25PD ...................................T84
TDS501A10100 WU25PD ...................................T84
TDS501A10200 WU25PD ...................................T84
TDS501A10300 WU25PD ...................................T84
TDS501A10320 WU25PD ...................................T84
TDS501A10400 WU25PD ...................................T84
TDS501A10500 WU25PD ...................................T84
TDS501A10600 WU25PD ...................................T84
TDS501A10700 WU25PD ...................................T85
TDS501A10716 WU25PD ...................................T85
TDS501A10800 WU25PD ...................................T85
TDS501A10900 WU25PD ...................................T85
TDS501A11000 WU25PD ...................................T85
TDS501A11100 WU25PD ...................................T85
TDS501A11113 WU25PD ...................................T85
TDS501A11200 WU25PD ...................................T85
TDS501A11300 WU25PD ...................................T85
TDS501A11400 WU25PD ...................................T85
TDS501A11500 WU25PD ...................................T85
TDS501A11600 WU25PD ...................................T85
TDS501A11700 WU25PD ...................................T85
TDS501A11800 WU25PD ...................................T85
TDS501A11900 WU25PD ...................................T85
TDS501A11910 WU25PD ...................................T85
TDS501A12000 WU25PD ...................................T85
TDS501A12300 WU25PD ...................................T85
TDS501A12304 WU25PD ...................................T85
TDS501A12500 WU25PD ...................................T85
TDS501A12700 WU25PD ...................................T85
TDS501A12800 WU25PD ...................................T85
TDS501A13000 WU25PD ...................................T85
TDS501A13100 WU25PD ...................................T85
TDS501A13500 WU25PD ...................................T85
TDS501A13800 WU25PD ...................................T85
TDS501A14000 WU25PD ...................................T85
TDS501A14290 WU25PD ...................................T85
TDS501A14500 WU25PD ...................................T85
TDS501A14800 WU25PD ...................................T85
TDS501A15000 WU25PD ...................................T85
TDS501A15500 WU25PD ...................................T85
TDS501A15800 WU25PD ...................................T85
TDS501A15870 WU25PD ...................................T85
TDS501A16000 WU25PD ...................................T85
TDS501A16500 WU25PD ...................................T85
TDS501A16670 WU25PD ...................................T85
TDS501A16800 WU25PD ...................................T85
TDS501A17000 WU25PD ...................................T85
TDS501A17500 WU25PD ...................................T85
TDS501A17800 WU25PD ...................................T86
TDS501A18000 WU25PD ...................................T86
TDS501A18500 WU25PD ...................................T86
TDS501A18800 WU25PD ...................................T86
TDS501A19000 WU25PD ...................................T86
TDS501A19050 WU25PD ...................................T86
TDS501A19500 WU25PD ...................................T86
TDS501A19800 WU25PD ...................................T86
TDS501A20000 WU25PD ...................................T86
TDS502A03000 WU25PD ...................................T87
TDS502A03100 WU25PD ...................................T87
TDS502A03175 WU25PD ...................................T87
TDS502A03200 WU25PD ...................................T87
TDS502A03250 WU25PD ...................................T87
TDS502A03300 WU25PD ...................................T87
TDS502A03400 WU25PD ...................................T87
TDS502A03455 WU25PD ...................................T87
TDS502A03500 WU25PD ...................................T87
TDS502A03600 WU25PD ...................................T87
TDS502A03700 WU25PD ...................................T87
TDS502A03800 WU25PD ...................................T87
TDS502A03900 WU25PD ...................................T87
TDS502A04000 WU25PD ...................................T87
TDS502A04100 WU25PD ...................................T87
TDS502A04200 WU25PD ...................................T87
TDS502A04300 WU25PD ...................................T87
TDS502A04370 WU25PD ...................................T87
TDS502A04400 WU25PD ...................................T87
TDS502A04500 WU25PD ...................................T87
TDS502A04600 WU25PD ...................................T87
TDS502A04650 WU25PD ...................................T87
TDS502A04700 WU25PD ...................................T87
TDS502A04760 WU25PD ...................................T87
TDS502A04800 WU25PD ...................................T88
TDS502A04900 WU25PD ...................................T88
TDS502A05000 WU25PD ...................................T88
TDS502A05100 WU25PD ...................................T88
TDS502A05160 WU25PD ...................................T88
TDS502A05200 WU25PD ...................................T88
TDS502A05300 WU25PD ...................................T88
TDS502A05400 WU25PD ...................................T88
TDS502A05500 WU25PD ...................................T88
TDS502A05550 WU25PD ...................................T88
TDS502A05560 WU25PD ...................................T88
TDS502A05600 WU25PD ...................................T88
TDS502A05700 WU25PD ...................................T88
TDS502A05800 WU25PD ...................................T88
TDS502A05900 WU25PD ...................................T88
TDS502A05950 WU25PD ...................................T88
TDS502A06000 WU25PD ...................................T88
TDS502A06100 WU25PD ...................................T88
TDS502A06200 WU25PD ...................................T88
TDS502A06300 WU25PD ...................................T88
TDS502A06350 WU25PD ...................................T88
TDS502A06400 WU25PD ...................................T88
TDS502A06500 WU25PD ...................................T88
TDS502A06600 WU25PD ...................................T88
TDS502A06700 WU25PD ...................................T88
TDS502A06750 WU25PD ...................................T88
TDS502A06800 WU25PD ...................................T88
TDS502A06900 WU25PD ...................................T88
TDS502A07000 WU25PD ...................................T88
TDS502A07100 WU25PD ...................................T88
TDS502A07140 WU25PD ...................................T88
TDS502A07200 WU25PD ...................................T88
TDS502A07300 WU25PD ...................................T88
TDS502A07400 WU25PD ...................................T88
TDS502A07500 WU25PD ...................................T88
TDS502A07540 WU25PD ...................................T88
TDS502A07600 WU25PD ...................................T88
TDS502A07700 WU25PD ...................................T88
TDS502A07800 WU25PD ...................................T88
TDS502A07900 WU25PD ...................................T88
TDS502A07940 WU25PD ...................................T89
TDS502A08000 WU25PD ...................................T89
TDS502A08100 WU25PD ...................................T89
TDS502A08200 WU25PD ...................................T89
TDS502A08300 WU25PD ...................................T89
TDS502A08330 WU25PD ...................................T89
TDS502A08400 WU25PD ...................................T89
TDS502A08500 WU25PD ...................................T89
TDS502A08600 WU25PD ...................................T89
TDS502A08700 WU25PD ...................................T89
TDS502A08800 WU25PD ...................................T89
TDS502A08900 WU25PD ...................................T89
TDS502A09000 WU25PD ...................................T89
TDS502A09100 WU25PD ...................................T89
TDS502A09130 WU25PD ...................................T89
TDS502A09200 WU25PD ...................................T89
TDS502A09300 WU25PD ...................................T89
TDS502A09400 WU25PD ...................................T89
TDS502A09500 WU25PD ...................................T89
TDS502A09520 WU25PD ...................................T89
TDS502A09600 WU25PD ...................................T89
TDS502A09700 WU25PD ...................................T89
TDS502A09800 WU25PD ...................................T89
TDS502A09900 WU25PD ...................................T89
TDS502A09920 WU25PD ...................................T89
TDS502A10000 WU25PD ...................................T89
TDS502A10100 WU25PD ...................................T89
TDS502A10200 WU25PD ...................................T89
TDS502A10300 WU25PD ...................................T89
TDS502A10320 WU25PD ...................................T89
TDS502A10400 WU25PD ...................................T89
TDS502A10500 WU25PD ...................................T89
TDS502A10600 WU25PD ...................................T89
TDS502A10700 WU25PD ...................................T89
TDS502A10720 WU25PD ...................................T89
TDS502A10800 WU25PD ...................................T89
TDS502A10900 WU25PD ...................................T89
TDS502A11000 WU25PD ...................................T89
TDS502A11100 WU25PD ...................................T89
TDS502A11110 WU25PD ...................................T89
TDS502A11200 WU25PD ...................................T90
TDS502A11300 WU25PD ...................................T90
TDS502A11400 WU25PD ...................................T90
TDS502A11500 WU25PD ...................................T90
TDS502A11600 WU25PD ...................................T90
TDS502A11700 WU25PD ...................................T90
TDS502A11800 WU25PD ...................................T90
TDS502A11900 WU25PD ...................................T90
TDS502A11910 WU25PD ...................................T90
TDS502A12000 WU25PD ...................................T90
TDS502A12300 WU25PD ...................................T90
TDS502A12500 WU25PD ...................................T90
TDS502A12700 WU25PD ...................................T90
TDS502A12800 WU25PD ...................................T90
TDS502A13000 WU25PD ...................................T90
TDS502A13100 WU25PD ...................................T90
TDS502A13500 WU25PD ...................................T90
TDS502A13800 WU25PD ...................................T90
TDS502A14000 WU25PD ...................................T90
TDS502A14290 WU25PD ...................................T90
TDS502A14500 WU25PD ...................................T90
TDS502A14800 WU25PD ...................................T90
TDS502A15000 WU25PD ...................................T90
TDS502A15500 WU25PD ...................................T90
TDS502A15800 WU25PD ...................................T90
TDS502A15870 WU25PD ...................................T90
TDS502A16000 WU25PD ...................................T90
TDS502A16500 WU25PD ...................................T90
TDS502A16670 WU25PD ...................................T90
TDS502A16800 WU25PD ...................................T90
TDS502A17000 WU25PD ...................................T90
TDS502A17500 WU25PD ...................................T90
TDS502A17800 WU25PD ...................................T90
TDS502A18000 WU25PD ...................................T90
TDS502A18500 WU25PD ...................................T90
TDS502A18800 WU25PD ...................................T90
TDS502A19000 WU25PD ...................................T90
TDS502A19050 WU25PD ...................................T90
TDS502A19500 WU25PD ...................................T90
TDS502A19800 WU25PD ...................................T90
TDS502A20000 WU25PD ...................................T90
TDS503A03000 WU25PD ...................................T91
TDS503A03100 WU25PD ...................................T91
TDS503A03175 WU25PD ...................................T91
TDS503A03200 WU25PD ...................................T91
TDS503A03250 WU25PD ...................................T91
TDS503A03300 WU25PD ...................................T91
TDS503A03400 WU25PD ...................................T91
TDS503A03455 WU25PD ...................................T91
TDS503A03500 WU25PD ...................................T91
TDS503A03700 WU25PD ...................................T91
TDS503A03800 WU25PD ...................................T91
TDS503A03900 WU25PD ...................................T91
TDS503A04000 WU25PD ...................................T91
TDS503A04100 WU25PD ...................................T91
TDS503A04200 WU25PD ...................................T91
TDS503A04300 WU25PD ...................................T91
TDS503A04370 WU25PD ...................................T91
TDS503A04400 WU25PD ...................................T91
TDS503A04500 WU25PD ...................................T91
TDS503A04600 WU25PD ...................................T91
TDS503A04650 WU25PD ...................................T91
TDS503A04700 WU25PD ...................................T91
TDS503A04760 WU25PD ...................................T91
TDS503A04800 WU25PD ...................................T91
TDS503A04900 WU25PD ...................................T92
TDS503A05000 WU25PD ...................................T92
TDS503A05100 WU25PD ...................................T92
TDS503A05160 WU25PD ...................................T92
TDS503A05200 WU25PD ...................................T92
TDS503A05300 WU25PD ...................................T92
TDS503A05400 WU25PD ...................................T92
TDS503A05500 WU25PD ...................................T92
TDS503A05550 WU25PD ...................................T92
TDS503A05560 WU25PD ...................................T92
TDS503A05600 WU25PD ...................................T92
TDS503A05700 WU25PD ...................................T92
TDS503A05800 WU25PD ...................................T92
TDS503A05900 WU25PD ...................................T92
TDS503A05950 WU25PD ...................................T92
TDS503A06000 WU25PD ...................................T92
TDS503A06100 WU25PD ...................................T92
TDS503A06200 WU25PD ...................................T92
Catalogue No. Page(s) Catalogue No. Page(s) Catalogue No. Page(s)
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 128 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRANDO b 28 20153 09PM
Z129
widia.com
Index by Catalogue Number
Catalogue No. Page(s)
TDS503A06300 WU25PD ...................................T92
TDS503A06350 WU25PD ...................................T92
TDS503A06400 WU25PD ...................................T92
TDS503A06500 WU25PD ...................................T92
TDS503A06600 WU25PD ...................................T92
TDS503A06700 WU25PD ...................................T92
TDS503A06750 WU25PD ...................................T92
TDS503A06800 WU25PD ...................................T92
TDS503A06900 WU25PD ...................................T92
TDS503A07000 WU25PD ...................................T92
TDS503A07100 WU25PD ...................................T92
TDS503A07140 WU25PD ...................................T92
TDS503A07200 WU25PD ...................................T92
TDS503A07300 WU25PD ...................................T92
TDS503A07400 WU25PD ...................................T92
TDS503A07500 WU25PD ...................................T92
TDS503A07540 WU25PD ...................................T92
TDS503A07600 WU25PD ...................................T92
TDS503A07700 WU25PD ...................................T92
TDS503A07800 WU25PD ...................................T92
TDS503A07900 WU25PD ...................................T92
TDS503A07940 WU25PD ...................................T92
TDS503A08000 WU25PD ...................................T93
TDS503A08100 WU25PD ...................................T93
TDS503A08200 WU25PD ...................................T93
TDS503A08300 WU25PD ...................................T93
TDS503A08330 WU25PD ...................................T93
TDS503A08400 WU25PD ...................................T93
TDS503A08500 WU25PD ...................................T93
TDS503A08600 WU25PD ...................................T93
TDS503A08700 WU25PD ...................................T93
TDS503A08800 WU25PD ...................................T93
TDS503A08900 WU25PD ...................................T93
TDS503A09000 WU25PD ...................................T93
TDS503A09100 WU25PD ...................................T93
TDS503A09130 WU25PD ...................................T93
TDS503A09200 WU25PD ...................................T93
TDS503A09300 WU25PD ...................................T93
TDS503A09400 WU25PD ...................................T93
TDS503A09500 WU25PD ...................................T93
TDS503A09520 WU25PD ...................................T93
TDS503A09600 WU25PD ...................................T93
TDS503A09700 WU25PD ...................................T93
TDS503A09800 WU25PD ...................................T93
TDS503A09900 WU25PD ...................................T93
TDS503A09920 WU25PD ...................................T93
TDS503A10000 WU25PD ...................................T93
TDS503A10100 WU25PD ...................................T93
TDS503A10200 WU25PD ...................................T93
TDS503A10300 WU25PD ...................................T93
TDS503A10320 WU25PD ...................................T93
TDS503A10400 WU25PD ...................................T93
TDS503A10500 WU25PD ...................................T93
TDS503A10600 WU25PD ...................................T93
TDS503A10700 WU25PD ...................................T93
TDS503A10720 WU25PD ...................................T93
TDS503A10800 WU25PD ...................................T93
TDS503A10900 WU25PD ...................................T93
TDS503A11000 WU25PD ...................................T93
TDS503A11100 WU25PD ...................................T93
TDS503A11110 WU25PD ...................................T93
TDS503A11200 WU25PD ...................................T93
TDS503A11300 WU25PD ...................................T94
TDS503A11400 WU25PD ...................................T94
TDS503A11500 WU25PD ...................................T94
TDS503A11600 WU25PD ...................................T94
TDS503A11700 WU25PD ...................................T94
TDS503A11800 WU25PD ...................................T94
TDS503A11900 WU25PD ...................................T94
TDS503A11910 WU25PD ...................................T94
TDS503A12000 WU25PD ...................................T94
TDS503A12300 WU25PD ...................................T94
TDS503A12500 WU25PD ...................................T94
TDS503A12700 WU25PD ...................................T94
TDS503A12800 WU25PD ...................................T94
TDS503A13000 WU25PD ...................................T94
TDS503A13100 WU25PD ...................................T94
TDS503A13500 WU25PD ...................................T94
TDS503A13800 WU25PD ...................................T94
TDS503A14000 WU25PD ...................................T94
TDS503A14290 WU25PD ...................................T94
TDS503A14500 WU25PD ...................................T94
TDS503A14800 WU25PD ...................................T94
TDS503A15000 WU25PD ...................................T94
TDS503A15500 WU25PD ...................................T94
TDS503A15800 WU25PD ...................................T94
TDS503A15870 WU25PD ...................................T94
TDS503A16000 WU25PD ...................................T94
TDS503A16500 WU25PD ...................................T94
TDS503A16670 WU25PD ...................................T94
TDS503A16800 WU25PD ...................................T94
TDS503A17000 WU25PD ...................................T94
TDS503A17500 WU25PD ...................................T94
TDS503A17800 WU25PD ...................................T94
TDS503A18000 WU25PD ...................................T94
TDS503A18500 WU25PD ...................................T94
TDS503A18800 WU25PD ...................................T94
TDS503A19000 WU25PD ...................................T94
TDS503A19050 WU25PD ...................................T94
TDS503A19500 WU25PD ...................................T94
TDS503A19800 WU25PD ...................................T94
TDS503A20000 WU25PD ...................................T94
TDS504A03000 WU20PD .................................T100
TDS504A03175 WU20PD .................................T100
TDS504A03264 WU20PD .................................T100
TDS504A03455 WU20PD .................................T100
TDS504A03500 WU20PD .................................T100
TDS504A03734 WU20PD .................................T100
TDS504A03970 WU20PD .................................T100
TDS504A04000 WU20PD .................................T100
TDS504A04500 WU20PD .................................T100
TDS504A04600 WU20PD .................................T100
TDS504A04763 WU20PD .................................T100
TDS504A04800 WU20PD .................................T100
TDS504A05000 WU20PD .................................T100
TDS504A05100 WU20PD .................................T100
TDS504A05200 WU20PD .................................T100
TDS504A05300 WU20PD .................................T100
TDS504A05410 WU20PD .................................T100
TDS504A05500 WU20PD .................................T100
TDS504A05558 WU20PD .................................T100
TDS504A05600 WU20PD .................................T100
TDS504A05700 WU20PD .................................T100
TDS504A05800 WU20PD .................................T100
TDS504A06000 WU20PD .................................T100
TDS504A06200 WU20PD .................................T100
TDS504A06350 WU20PD .................................T101
TDS504A06500 WU20PD .................................T101
TDS504A06528 WU20PD .................................T101
TDS504A06600 WU20PD .................................T101
TDS504A06746 WU20PD .................................T101
TDS504A06800 WU20PD .................................T101
TDS504A06909 WU20PD .................................T101
TDS504A07000 WU20PD .................................T101
TDS504A07145 WU20PD .................................T101
TDS504A07500 WU20PD .................................T101
TDS504A07541 WU20PD .................................T101
TDS504A07700 WU20PD .................................T101
TDS504A07800 WU20PD .................................T101
TDS504A07938 WU20PD .................................T101
TDS504A08000 WU20PD .................................T101
TDS504A08100 WU20PD .................................T101
TDS504A08334 WU20PD .................................T101
TDS504A08433 WU20PD .................................T101
TDS504A08500 WU20PD .................................T101
TDS504A08700 WU20PD .................................T101
TDS504A08733 WU20PD .................................T101
TDS504A09000 WU20PD .................................T101
TDS504A09100 WU20PD .................................T101
TDS504A09129 WU20PD .................................T101
TDS504A09347 WU20PD .................................T101
TDS504A09500 WU20PD .................................T101
TDS504A09525 WU20PD .................................T101
TDS504A09921 WU20PD .................................T101
TDS504A10000 WU20PD .................................T101
TDS504A10200 WU20PD .................................T101
TDS504A10300 WU20PD .................................T101
TDS504A10320 WU20PD .................................T101
TDS504A10500 WU20PD .................................T101
TDS504A10716 WU20PD .................................T101
TDS504A10800 WU20PD .................................T101
TDS504A11000 WU20PD .................................T101
TDS504A11113 WU20PD .................................T101
TDS504A11500 WU20PD .................................T101
TDS504A11800 WU20PD .................................T101
TDS504A12000 WU20PD .................................T101
TDS504A12100 WU20PD .................................T102
TDS504A12304 WU20PD .................................T102
TDS504A12500 WU20PD .................................T102
TDS504A12700 WU20PD .................................T102
TDS504A13000 WU20PD .................................T102
TDS504A13100 WU20PD .................................T102
TDS504A13500 WU20PD .................................T102
TDS504A14000 WU20PD .................................T102
TDS504A14100 WU20PD .................................T102
TDS504A14288 WU20PD .................................T102
TDS504A14500 WU20PD .................................T102
TDS504A14684 WU20PD .................................T102
TDS504A15000 WU20PD .................................T102
TDS504A15500 WU20PD .................................T102
TDS504A15875 WU20PD .................................T102
TDS504A16000 WU20PD .................................T102
TDS504A16500 WU20PD .................................T102
TDS504A17000 WU20PD .................................T102
TDS504A17463 WU20PD .................................T102
TDS504A17500 WU20PD .................................T102
TDS504A18000 WU20PD .................................T102
TDS504A18500 WU20PD .................................T102
TDS504A19000 WU20PD .................................T102
TDS504A19050 WU20PD .................................T102
TDS504A19500 WU20PD .................................T102
TDS504A20000 WU20PD .................................T102
TNAX1604ZZ26 THM ..........................................L12
TNAX1604ZZ26 TTM08 ......................................L12
TNAX1604ZZ31 THM ..........................................L12
TNAX1604ZZ31 TTM08 ......................................L12
TNAX1604ZZ41 THM ..........................................L12
TNAX1604ZZ41 TTM ..........................................L12
TNAX2206ZZ41 TTM ..........................................L13
TNAX2206ZZ51 TTM ..........................................L13
TNGA160404S01025MT WBH25P ................... B214
TNGA160408EFWMT WBH25P ........................ B213
TNGA160408S01025MT WBH10U................... B214
TNGA160408S01025MT WBH25P ................... B214
TNGA160408T02020 CW2015 ........................ B193
TNGA160408T02020 CW5025 ........................ B193
TNGA160412EFWMT WBH25P ........................ B213
TNGA160412S01025MT WBH10U................... B214
TNGA160412S01025MT WBH25P ................... B214
TNGA160412T02020 CW2015 ........................ B193
TNGA160412T02020 CW5025 ........................ B193
TNGA160416T02020 CW2015 ........................ B193
TNGA160416T02020 CW5025 ........................ B193
TNGA220408T02020 CW2015 ........................ B193
TNGG160404FS WS10PT .................................. B83
TNGG160404FS WS25PT .................................. B83
TNGG160404FS WU10HT .................................. B83
TNGG220408FS WS10PT .................................. B83
TNGN160404T02020 CW2015 ....................... B192
TNGN160408T01020 CW3020 ....................... B192
TNGN160408T02020 CW2015 ....................... B192
TNGN160408T02020 CW5025 ....................... B192
TNGN160412T02020 CW2015 ....................... B192
TNGN160412T02020 CW5025 ....................... B192
TNGN160416T02020 CW2015 ....................... B192
TNGN160708T02020 CW2015 ....................... B192
TNGN160712T02020 CW2015 ....................... B192
TNGN220408T02020 CW2015 ....................... B192
TNGN220416T02020 CW5025 ....................... B192
TNGP160402 TN10U ....................................... B140
TNGP160402 TN15U ....................................... B140
TNGP160404 TN10U ....................................... B140
TNGP160404 TN15U ....................................... B140
TNGP160408 TN10U ....................................... B140
TNMA160408 TN20K....................................... B140
TNMA160408 WK05CT ..................................... B84
TNMA160408 WK20CT ..................................... B84
TNMA160412 TN20K....................................... B140
TNMA160412 WK05CT ..................................... B84
TNMA160412 WK20CT ..................................... B84
TNMA160416 WK20CT ..................................... B84
TNMA220408 TN20K....................................... B140
TNMA220408 WK05CT ..................................... B84
TNMA220408 WK20CT ..................................... B84
TNMA220412 WK05CT ..................................... B84
TNMA220412 WK20CT ..................................... B84
TNMA220416 WK05CT ..................................... B84
TNMA220416 WK20CT ..................................... B84
TNMA270616 WK20CT ..................................... B84
TNMG110304FF WK20CT .................................. B84
TNMG110304FF WS10PT .................................. B84
TNMG110304ML WK20CT................................. B85
TNMG110304ML WP25CT................................. B85
TNMG110308FF WK20CT .................................. B84
TNMG110308FF WS10PT .................................. B84
TNMG110308ML WK20CT................................. B85
TNMG1604042P TN10P .................................. B141
TNMG1604042P TN10U .................................. B141
TNMG1604042P TN15M ................................. B141
TNMG1604042P TN15U .................................. B141
TNMG1604042P TN20K .................................. B141
TNMG1604042P TN20P .................................. B141
TNMG1604042P TN30M ................................. B141
TNMG1604044P TN15M ................................. B141
TNMG1604044P TN20P .................................. B141
TNMG1604044P TN30M ................................. B141
TNMG1604046P TN10P .................................. B142
TNMG1604046P TN15M ................................. B142
TNMG1604046P TN20P .................................. B142
TNMG1604046P TN30M ................................. B142
TNMG1604047N TN20P .................................. B143
TNMG160404FF WK20CT .................................. B84
Catalogue No. Page(s) Catalogue No. Page(s) Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 129 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRAND O b 28 2015 3 09 PM
Z130 widia.com
Index by Catalogue Number
Index
Catalogue No. Page(s)
TNMG160404FF WM25CT ................................. B84
TNMG160404FF WP15CT .................................. B84
TNMG160404ML WK05CT................................. B85
TNMG160404ML WK20CT................................. B85
TNMG160404ML WP15CT................................. B85
TNMG160404ML WP25CT................................. B85
TNMG160404MR WP15CT ................................ B86
TNMG160404MR WP25CT ................................ B86
TNMG160404MR WP35CT ................................ B86
TNMG160404MS WS10PT ................................ B86
TNMG160404MS WS25PT ................................ B86
TNMG160404MS WU10HT ................................ B86
TNMG160404UF WM15CT ................................ B88
TNMG160404UF WM25CT ................................ B88
TNMG160404UF WS10PT.................................. B88
TNMG160404UM WM15CT ............................... B88
TNMG160404UM WM25CT ............................... B88
TNMG160404UM WM35CT ............................... B88
TNMG160404UM WS10PT ................................ B88
TNMG1604082P TN10P .................................. B141
TNMG1604082P TN10U .................................. B141
TNMG1604082P TN15M ................................. B141
TNMG1604082P TN15U .................................. B141
TNMG1604082P TN20K .................................. B141
TNMG1604082P TN20P .................................. B141
TNMG1604084P TN15M ................................. B141
TNMG1604084P TN20P .................................. B141
TNMG1604084P TN30M ................................. B141
TNMG1604086P TN10P .................................. B142
TNMG1604086P TN15M ................................. B142
TNMG1604086P TN20P .................................. B142
TNMG1604086P TN30M ................................. B142
TNMG1604086P TN30P .................................. B142
TNMG1604087N TN10P .................................. B143
TNMG1604087N TN20K .................................. B143
TNMG1604087N TN20P .................................. B143
TNMG1604087N TN30P .................................. B143
TNMG160408FF WK20CT .................................. B84
TNMG160408FF WM25CT ................................. B84
TNMG160408FF WP15CT .................................. B84
TNMG160408ML WK05CT................................. B85
TNMG160408ML WK20CT................................. B85
TNMG160408ML WP15CT................................. B85
TNMG160408ML WP25CT................................. B85
TNMG160408MR WP15CT ................................ B86
TNMG160408MR WP25CT ................................ B86
TNMG160408MR WP35CT ................................ B86
TNMG160408MS WS10PT ................................ B86
TNMG160408MS WS25PT ................................ B86
TNMG160408MS WU10HT ................................ B86
TNMG160408RH WK20CT ................................. B87
TNMG160408RH WM25CT ................................ B87
TNMG160408RH WP15CT ................................. B87
TNMG160408RH WP25CT ................................. B87
TNMG160408RH WP35CT ................................. B87
TNMG160408UF WM15CT ................................ B88
TNMG160408UF WM25CT ................................ B88
TNMG160408UF WP15CT ................................. B88
TNMG160408UF WS10PT.................................. B88
TNMG160408UM WM15CT ............................... B88
TNMG160408UM WM25CT ............................... B88
TNMG160408UM WM35CT ............................... B88
TNMG160408UM WS10PT ................................ B88
TNMG160408UR WK20CT ................................. B89
TNMG160408UR WM15CT ................................ B89
TNMG160408UR WM25CT ................................ B89
TNMG160408UR WP15CT ................................. B89
TNMG160408UR WP25CT ................................. B89
TNMG160408UR WP35CT ................................. B89
TNMG160408UR WS25PT ................................. B89
TNMG1604122P TN10P .................................. B141
TNMG1604122P TN10U .................................. B141
TNMG1604122P TN15M ................................. B141
TNMG1604122P TN20K .................................. B141
TNMG1604122P TN20P .................................. B141
TNMG1604122P TN30M ................................. B141
TNMG1604124P TN15M ................................. B141
TNMG1604124P TN30M ................................. B141
TNMG1604126P TN10P .................................. B142
TNMG1604126P TN15M ................................. B142
TNMG1604126P TN20P .................................. B142
TNMG1604126P TN30M ................................. B142
TNMG1604127N TN10P .................................. B143
TNMG1604127N TN20K .................................. B143
TNMG1604127N TN20P .................................. B143
TNMG1604127N TN30P .................................. B143
TNMG160412FF WK20CT .................................. B84
TNMG160412FF WM25CT ................................. B84
TNMG160412FF WP15CT .................................. B84
TNMG160412ML WK05CT................................. B85
TNMG160412ML WK20CT................................. B85
TNMG160412ML WP15CT................................. B85
TNMG160412ML WP25CT................................. B85
TNMG160412MR WP15CT ................................ B86
TNMG160412MR WP25CT ................................ B86
TNMG160412MR WP35CT ................................ B86
TNMG160412RH WK20CT ................................. B87
TNMG160412RH WM25CT ................................ B87
TNMG160412RH WP15CT ................................. B87
TNMG160412RH WP25CT ................................. B87
TNMG160412RH WP35CT ................................. B87
TNMG160412UF WM15CT ................................ B88
TNMG160412UF WM25CT ................................ B88
TNMG160412UF WS10PT.................................. B88
TNMG160412UM WM15CT ............................... B88
TNMG160412UM WM25CT ............................... B88
TNMG160412UM WM35CT ............................... B88
TNMG160412UR WK20CT ................................. B89
TNMG160412UR WM25CT ................................ B89
TNMG160412UR WM35CT ................................ B89
TNMG160412UR WP15CT ................................. B89
TNMG160412UR WP25CT ................................. B89
TNMG160412UR WS25PT ................................. B89
TNMG160416UM WM25CT ............................... B88
TNMG160416UM WM35CT ............................... B88
TNMG160416UR WK20CT ................................. B89
TNMG160416UR WM25CT ................................ B89
TNMG160416UR WP15CT ................................. B89
TNMG2204044P TN15M ................................. B141
TNMG2204044P TN20P .................................. B141
TNMG2204044P TN30M ................................. B141
TNMG2204046P TN10P .................................. B142
TNMG2204046P TN15M ................................. B142
TNMG2204046P TN20P .................................. B142
TNMG2204046P TN30M ................................. B142
TNMG2204047N TN10P .................................. B143
TNMG2204047N TN20P .................................. B143
TNMG220404ML WK20CT................................. B85
TNMG220404ML WP15CT................................. B85
TNMG220404MR WP15CT ................................ B86
TNMG220404MR WP25CT ................................ B86
TNMG220404MR WP35CT ................................ B86
TNMG220404MS WS10PT ................................ B86
TNMG220404MS WS25PT ................................ B86
TNMG220404MS WU10HT ................................ B86
TNMG220404UF WM15CT ................................ B88
TNMG220404UF WM25CT ................................ B88
TNMG220404UF WS10PT.................................. B88
TNMG220404UM WM15CT ............................... B88
TNMG220404UM WM25CT ............................... B88
TNMG220404UM WM35CT ............................... B88
TNMG2204082P TN10P .................................. B141
TNMG2204082P TN10U .................................. B141
TNMG2204082P TN15M ................................. B141
TNMG2204082P TN15U .................................. B141
TNMG2204082P TN20K .................................. B141
TNMG2204082P TN20P .................................. B141
TNMG2204084P TN15M ................................. B141
TNMG2204084P TN20P .................................. B141
TNMG2204084P TN30M ................................. B141
TNMG2204086P TN10P .................................. B142
TNMG2204086P TN15M ................................. B142
TNMG2204086P TN20P .................................. B142
TNMG2204086P TN30M ................................. B142
TNMG2204086P TN30P .................................. B142
TNMG2204087N TN10P .................................. B143
TNMG2204087N TN20K .................................. B143
TNMG2204087N TN20P .................................. B143
TNMG2204087N TN30P .................................. B143
TNMG220408ML WP15CT................................. B85
TNMG220408ML WP25CT................................. B85
TNMG220408MR WP15CT ................................ B86
TNMG220408MR WP25CT ................................ B86
TNMG220408MR WP35CT ................................ B86
TNMG220408MS WS10PT ................................ B86
TNMG220408MS WS25PT ................................ B86
TNMG220408MS WU10HT ................................ B86
TNMG220408RH WK20CT ................................. B87
TNMG220408RH WM25CT ................................ B87
TNMG220408RH WP15CT ................................. B87
TNMG220408RH WP25CT ................................. B87
TNMG220408RH WP35CT ................................. B87
TNMG220408UF WM15CT ................................ B88
TNMG220408UF WM25CT ................................ B88
TNMG220408UF WS10PT.................................. B88
TNMG220408UM WM15CT ............................... B88
TNMG220408UM WM25CT ............................... B88
TNMG220408UM WM35CT ............................... B88
TNMG220408UM WP15CT ................................ B88
TNMG220408UM WS10PT ................................ B88
TNMG220408UR WK20CT ................................. B89
TNMG220408UR WM15CT ................................ B89
TNMG220408UR WM25CT ................................ B89
TNMG220408UR WM35CT ................................ B89
TNMG220408UR WP15CT ................................. B89
TNMG220408UR WP25CT ................................. B89
TNMG220408UR WP35CT ................................. B89
TNMG220408UR WS25PT ................................. B89
TNMG2204124P TN20P .................................. B141
TNMG2204127N TN20K .................................. B143
TNMG2204127N TN20P .................................. B143
TNMG2204127N TN30P .................................. B143
TNMG220412MR WP15CT ................................ B86
TNMG220412MR WP25CT ................................ B86
TNMG220412MR WP35CT ................................ B86
TNMG220412MS WS10PT ................................ B86
TNMG220412MS WS25PT ................................ B86
TNMG220412MS WU10HT ................................ B86
TNMG220412RH WK20CT ................................. B87
TNMG220412RH WM25CT ................................ B87
TNMG220412RH WP15CT ................................. B87
TNMG220412RH WP25CT ................................. B87
TNMG220412RH WP35CT ................................. B87
TNMG220412UM WM15CT ............................... B88
TNMG220412UM WM25CT ............................... B88
TNMG220412UM WS10PT ................................ B88
TNMG220412UR WK20CT ................................. B89
TNMG220412UR WM15CT ................................ B89
TNMG220412UR WM25CT ................................ B89
TNMG220412UR WM35CT ................................ B89
TNMG220412UR WP15CT ................................. B89
TNMG220412UR WP25CT ................................. B89
TNMG220412UR WP35CT ................................. B89
TNMG220412UR WS25PT ................................. B89
TNMG220416MR WP15CT ................................ B86
TNMG220416MR WP25CT ................................ B86
TNMG220416MR WP35CT ................................ B86
TNMG220416RH WK20CT ................................. B87
TNMG220416RH WM25CT ................................ B87
TNMG220416RH WP15CT ................................. B87
TNMG220416RH WP25CT ................................. B87
TNMG220416RH WP35CT ................................. B87
TNMG220416UR WK20CT ................................. B89
TNMG220416UR WM25CT ................................ B89
TNMG220416UR WM35CT ................................ B89
TNMG220416UR WP15CT ................................. B89
TNMG220416UR WP25CT ................................. B89
TNMG270608MS WS25PT ................................ B86
TNMG270608MS WU10HT ................................ B86
TNMG2706127N TN10P .................................. B143
TNMG2706127N TN20K .................................. B143
TNMG2706127N TN20P .................................. B143
TNMG2706127N TN30P .................................. B143
TNMG270612RH WP15CT ................................. B87
TNMG270612RH WP25CT ................................. B87
TNMG270612RH WP35CT ................................. B87
TNMG270612UR WK20CT ................................. B89
TNMG270612UR WM15CT ................................ B89
TNMG270612UR WM25CT ................................ B89
TNMG270612UR WM35CT ................................ B89
TNMG270612UR WP15CT ................................. B89
TNMG270612UR WP25CT ................................. B89
TNMG270612UR WS25PT ................................. B89
TNMG270616RH WP15CT ................................. B87
TNMG270616RH WP25CT ................................. B87
TNMG270616RH WP35CT ................................. B87
TNMG270616UR WK20CT ................................. B89
TNMG270616UR WM15CT ................................ B89
TNMG270616UR WM25CT ................................ B89
TNMG270616UR WM35CT ................................ B89
TNMG270616UR WP15CT ................................. B89
TNMG270616UR WP25CT ................................. B89
TNMG3309247N TN10P .................................. B143
TNMG3309247N TN20K .................................. B143
TNMG3309247N TN20P .................................. B143
TNMG3309247N TN30P .................................. B143
TNMG330924RH WP15CT ................................. B87
TNMG330924RH WP25CT ................................. B87
TNMG330924RH WP35CT ................................. B87
TNMM16040865 TN7125.................................. B90
TNMM16040865 WP25CT................................. B90
TNMM16040865 WP35CT................................. B90
TNMM16041265 TN8025.................................. B90
TNMM16041265 WP35CT................................. B90
TNMM22040865 TN7015.................................. B90
TNMM22040865 WP15CT................................. B90
TNMM22040865 WP25CT................................. B90
TNMM22040865 WP35CT................................. B90
TNMM22041265 WM25CT ................................ B90
TNMM22041265 WP25CT................................. B90
TNMM22041265 WP35CT................................. B90
TNMM22041665 TN8025.................................. B90
Catalogue No. Page(s) Catalogue No. Page(s) Catalogue No. Page(s)
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 130 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRANDO b 28 20153 09PM
Z131
widia.com
Index by Catalogue Number
Catalogue No. Page(s)
TNMM22041665 WM25CT ................................ B90
TNMM22041665 WP15CT................................. B90
TNMM22041665 WP25CT................................. B90
TNMP160404 WM15CT ..................................... B90
TNMP160404 WM25CT ..................................... B90
TNMP160404 WM35CT ..................................... B90
TNMP160404 WS10PT ...................................... B90
TNMP160408 WM15CT ..................................... B90
TNMP160408 WM25CT ..................................... B90
TNMP160408 WM35CT ..................................... B90
TNMP160408 WS10PT ...................................... B90
TNMP160408 WS25PT ...................................... B90
TNMP160412 WM15CT ..................................... B90
TNMP160412 WM25CT ..................................... B90
TNMP160412 WM35CT ..................................... B90
TNMP160412 WS10PT ...................................... B90
TNMP160412 WS25PT ...................................... B90
TNMP220404 WM15CT ..................................... B90
TNMP220404 WM25CT ..................................... B90
TNMP220404 WM35CT ..................................... B90
TNMP220404 WS10PT ...................................... B90
TNMP220408 WM15CT ..................................... B90
TNMP220408 WM25CT ..................................... B90
TNMP220408 WM35CT ..................................... B90
TNMP220408 WS10PT ...................................... B90
TNMP220408 WS25PT ...................................... B90
TNMP220412 WM15CT ..................................... B90
TNMP220412 WM25CT ..................................... B90
TNMP220412 WM35CT ..................................... B90
TNMP220412 WS10PT ...................................... B90
TNMP220412 WS25PT ...................................... B90
TNMS160404FST WDN25U ............................. B214
TNMS160408FST WDN25U ............................. B214
TNUN160408 WK20CT ...................................... B91
TPCB160302 CG6 ............................................. D50
TPCH110204 CG6 ............................................. D52
TPGA110204 THM ............................................. B91
TPGA110208 THM ............................................. B91
TPGN110304F WDN25U .................................. B215
TPGN110304T01020 CW2015 ........................ B194
TPGN110308 WK20CT ...................................... B91
TPGN110308F WDN25U .................................. B215
TPGN110308T01020 CW2015 ........................ B194
TPGN110312T01020 CW2015 ........................ B194
TPGN160304F WDN25U .................................. B215
TPGN160304T00520 CW2015 ........................ B194
TPGN160304T01020 CW2015 ........................ B194
TPGN160308 WK20CT ...................................... B91
TPGN160308F WDN25U .................................. B215
TPGN160308T00520 CW2015 ........................ B194
TPGN160308T01020 CW2015 ........................ B194
TPGN160308T02020 CW5025 ........................ B194
TPGN160312T01020 CW2015 ........................ B194
TPGN160312T02020 CW5025 ........................ B194
TPGN220408F WDN25U .................................. B215
TPGT110202HP CG5 ......................................... D53
TPGT110204HP CG5 ......................................... D53
TPGT110204HP CM1 ........................................ D53
TPGT16T304HP CG5 ......................................... D53
TPGW110202EC WBH25P ............................... B215
TPGW110204FST WDN25U ............................. B216
TPGW110204S01015C WBH10P..................... B215
TPGW110204S01015C WBH25P..................... B215
TPGW110204S01015C WBH30P..................... B215
TPGW110208FST WDN25U ............................. B216
TPGW110208S01015C WBH10P..................... B215
TPGW110208S01015C WBH25P..................... B215
TPGW110208S01015C WBH30P..................... B215
TPGW16T304FST WDN25U ............................. B216
TPGW16T308FST WDN25U ............................. B216
TPHB110202 C3 ............................................... D50
TPHB110202 CG5 ............................................. D50
TPHB110202 CG6 ............................................. D50
TPHB110202 CM1............................................. D50
TPHB110202 TN7 .............................................. D50
TPHB110202M CBN6 ........................................ D50
TPHB110202M CPD1 ........................................ D50
TPHB110204 C3 ............................................... D50
TPHB110204 CG5 ............................................. D50
TPHB110204 CG6 ............................................. D50
TPHB110204 CM1............................................. D50
TPHB110204 TN7 .............................................. D50
TPHB110204M CBN6 ........................................ D50
TPHB110204M CPD1 ........................................ D50
TPHB110208 CG5 ............................................. D50
TPHB110208 CM1............................................. D50
TPHB110208 TN7 .............................................. D50
TPHB1102X0 C3 ................................................ D50
TPHB1102X0 CG5 ............................................. D50
TPHB1102X0 CM1 ............................................. D50
TPHB1102X0M CBN6 ........................................ D50
TPHB160302 C2 ............................................... D50
TPHB160302 CG5 ............................................. D50
TPHB160302 CM1............................................. D50
TPHB160304 C2 ............................................... D50
TPHB160304 CG5 ............................................. D50
TPHB160304 CG6 ............................................. D50
TPHB160304 CM1............................................. D50
TPHB160304 TN7 .............................................. D50
TPHB160308 C2 ............................................... D50
TPHB160308 CG5 ............................................. D50
TPHB160308 CG6 ............................................. D50
TPHB160308 CM1............................................. D50
TPHB160308 TN7 .............................................. D50
TPHB1603X0 CG5 ............................................. D50
TPHB1603X0 CM1 ............................................. D50
TPHH110202 CG5 ............................................. D52
TPHH110202 CG6 ............................................. D52
TPHH110202L CG5 ........................................... D51
TPHH110202L TN7 ............................................ D51
TPHH110202R CG5 ........................................... D51
TPHH110204 CG5 ............................................. D52
TPHH110204L CG5 ........................................... D51
TPHH110204L CG6 ........................................... D51
TPHH160302L CG5 ........................................... D51
TPHH160302R CG5 ........................................... D51
TPHH160304 CG5 ............................................. D52
TPHH160304 CG6 ............................................. D52
TPHH160304L CG5 ........................................... D51
TPHH160304L CG6 ........................................... D51
TPHH160304LF C25 .......................................... D52
TPHH160304R CG5 ........................................... D51
TPHH160308 ALO ............................................. D52
TPHH160308 CG5 ............................................. D52
TPHH160308 CG6 ............................................. D52
TPHH160308L CG5 ........................................... D51
TPHH160308R CG5 ........................................... D51
TPHH17T309LF CG5 .......................................... D52
TPMR110304 WP15CT ...................................... B92
TPMR110304 WP35CT ...................................... B92
TPMR110308 WK20CT ...................................... B92
TPMR110308 WP15CT ...................................... B92
TPMR110308 WP35CT ...................................... B92
TPMR160304 WK20CT ...................................... B92
TPMR160304 WP15CT ...................................... B92
TPMR160304 WP35CT ...................................... B92
TPMR160308 WK20CT ...................................... B92
TPMR160308 WP15CT ...................................... B92
TPMR160308 WP35CT ...................................... B92
TPMR160312 WK20CT ...................................... B92
TPMR160312 WP15CT ...................................... B92
TPMR160312 WP35CT ...................................... B92
TPMT090208FP WK20CT .................................. B92
TPMT090208FP WM15CT ................................. B92
TPMT090208FP WM25CT ................................. B92
TPMT090208FP WP15CT .................................. B92
TPMT090208FP WP25CT .................................. B92
TPMT110202LF CG5 ......................................... D53
TPMT110204FP WK20CT .................................. B92
TPMT110204FP WM15CT ................................. B92
TPMT110204FP WM25CT ................................. B92
TPMT110204FP WP15CT .................................. B92
TPMT110204FP WP25CT .................................. B92
TPMT110204LF CG5 ......................................... D53
TPMT110204LF CG6 ......................................... D53
TPMT110208FP WK20CT .................................. B92
TPMT110208FP WM15CT ................................. B92
TPMT110208FP WM25CT ................................. B92
TPMT110208FP WP15CT .................................. B92
TPMT110208FP WP25CT .................................. B92
TPMT110208MP WK20CT ................................. B93
TPMT110208MP WP25CT ................................. B93
TPMT160304LF CG5 ......................................... D53
TPMT160304LF CG6 ......................................... D53
TPMT160308LF CG5 ......................................... D53
TPMT16T304FP WK20CT .................................. B92
TPMT16T304FP WM25CT ................................. B92
TPMT16T304FP WP15CT .................................. B92
TPMT16T304FP WP25CT .................................. B92
TPMT16T308FP WK20CT .................................. B92
TPMT16T308FP WM25CT ................................. B92
TPMT16T308FP WP15CT .................................. B92
TPMT16T308FP WP25CT .................................. B92
TPMT16T308MP WK20CT ................................. B93
TPMT16T308MP WP25CT ................................. B93
TPMT16T312FP WM25CT ................................. B92
TPMT16T312MP WK20CT ................................. B93
TPMT16T312MP WP25CT ................................. B93
TPMT220408FP WP25CT .................................. B92
TPUN110304 THM ............................................. B93
TPUN110304 WP15CT ...................................... B93
TPUN110304 WP35CT ...................................... B93
TPUN110308 THM ............................................. B93
TPUN110308 WP15CT ...................................... B93
TPUN160304 THM ............................................. B93
TPUN160304 WK20CT ...................................... B93
TPUN160304 WP15CT ...................................... B93
TPUN160304 WP25CT ...................................... B93
TPUN160308 HK1500 ....................................... B93
TPUN160308 THM ............................................. B93
TPUN160308 TTR .............................................. B93
TPUN160308 WK20CT ...................................... B93
TPUN160308 WP15CT ...................................... B93
TPUN160308 WP25CT ...................................... B93
TPUN160312 THM ............................................. B93
TPUN160312 WK20CT ...................................... B93
TPUN160312 WP25CT ...................................... B93
TPUN220408 WP15CT ...................................... B93
TPUN220408 WP25CT ...................................... B93
TPUN220408 WP35CT ...................................... B93
TPUN220412 THM ............................................. B93
TPUN220412 TTR .............................................. B93
TPUN220412 WK20CT ...................................... B93
TPUN220412 WP25CT ...................................... B93
TPUN220412 WP35CT ...................................... B93
TT25 ........................................... V10, V13, V16, V19
VBGT1103011P TN10U ................................... B144
VBGT1103011P TN15U ................................... B144
VBGT1103021P TN10U ................................... B144
VBGT1103021P TN15U ................................... B144
VBGT1103041P TN10U ................................... B144
VBGT1604011P TN10U ................................... B144
VBGT1604021P TN10U ................................... B144
VBGT1604021P TN15U ................................... B144
VBGT1604041P TN10U ................................... B144
VBGT1604041P TN15U ................................... B144
VBGW110304FST WDN25U ............................. B216
VBGW160404FST WDN25U ............................. B216
VBGW160404S01015MT WBH10P .................. B216
VBGW160404S01015MT WBH30P .................. B216
VBGW160408S01015MT WBH10P .................. B216
VBGW160408S01015MT WBH30P .................. B216
VBMT1103021P TN10U ................................... B144
VBMT1103021P TN15U ................................... B144
VBMT110302FP WP25CT .................................. B94
VBMT1103041P TN10P ................................... B144
VBMT1103041P TN10U ................................... B144
VBMT1103041P TN15M .................................. B144
VBMT1103041P TN15U ................................... B144
VBMT1103041P TN20K ................................... B144
VBMT1103041P TN20P ................................... B144
VBMT1103041P TN30M .................................. B144
VBMT110304FP WM15CT ................................. B94
VBMT110304FP WM25CT ................................. B94
VBMT110304FP WP15CT .................................. B94
VBMT110304FP WP25CT .................................. B94
VBMT1103081P TN10P ................................... B144
VBMT1103081P TN10U ................................... B144
VBMT1103081P TN15M .................................. B144
VBMT1103081P TN20K ................................... B144
VBMT1103081P TN20P ................................... B144
VBMT110308FP WM15CT ................................. B94
VBMT110308FP WM25CT ................................. B94
VBMT110308FP WP25CT .................................. B94
VBMT1604021P TN10P ................................... B144
VBMT1604021P TN10U ................................... B144
VBMT1604021P TN15U ................................... B144
VBMT1604021P TN20K ................................... B144
VBMT1604021P TN30M .................................. B144
VBMT160402FP WM25CT ................................. B94
VBMT160402FP WP25CT .................................. B94
VBMT160404 WP15CT ...................................... B94
VBMT160404 WP25CT ...................................... B94
VBMT160404 WP35CT ...................................... B94
VBMT1604041P TN10P ................................... B144
VBMT1604041P TN10U ................................... B144
VBMT1604041P TN15M .................................. B144
VBMT1604041P TN15U ................................... B144
VBMT1604041P TN20K ................................... B144
VBMT1604041P TN20P ................................... B144
VBMT1604041P TN30M .................................. B144
VBMT160404FP WK20CT .................................. B94
VBMT160404FP WM15CT ................................. B94
VBMT160404FP WM25CT ................................. B94
VBMT160404FP WP15CT .................................. B94
VBMT160404FP WP25CT .................................. B94
VBMT160404MP WK20CT ................................. B95
VBMT160404MP WM25CT ................................ B95
VBMT160404MP WP25CT ................................. B95
VBMT160408 WP15CT ...................................... B94
VBMT160408 WP25CT ...................................... B94
VBMT160408 WP35CT ...................................... B94
Catalogue No. Page(s) Catalogue No. Page(s) Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 131 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRAND O b 28 2015 3 09 PM
Z132 widia.com
Index by Catalogue Number
Index
Catalogue No. Page(s)
VBMT1604081P TN10P ................................... B144
VBMT1604081P TN10U ................................... B144
VBMT1604081P TN15M .................................. B144
VBMT1604081P TN15U ................................... B144
VBMT1604081P TN20K ................................... B144
VBMT1604081P TN20P ................................... B144
VBMT1604081P TN30M .................................. B144
VBMT160408FP WK20CT .................................. B94
VBMT160408FP WM15CT ................................. B94
VBMT160408FP WM25CT ................................. B94
VBMT160408FP WP15CT .................................. B94
VBMT160408FP WP25CT .................................. B94
VBMT160408MP WK20CT ................................. B95
VBMT160408MP WM25CT ................................ B95
VBMT160408MP WP25CT ................................. B95
VBMT160412 WP15CT ...................................... B94
VBMT160412 WP25CT ...................................... B94
VBMT160412 WP35CT ...................................... B94
VBMT160412FP WP25CT .................................. B94
VCGT110302AL3 HWK15 ................................ B157
VCGT110304AL3 HWK15 ................................ B157
VCGT160404AL3 HCK10 ................................. B157
VCGT160404AL3 HWK15 ................................ B157
VCGT160408AL3 HCK10 ................................. B157
VCGT160408AL3 HWK15 ................................ B157
VCGT160412AL3 HCK10 ................................. B157
VCGT160412AL3 HWK15 ................................ B157
VCGT220530AL3 HCK10 ................................. B157
VCGT220530AL3 HWK15 ................................ B157
VCMW110304FST WDN25U ............................ B217
VDS201A01000 WU25PD .....................................T8
VDS201A01016 WU25PD .....................................T8
VDS201A01041 WU25PD .....................................T8
VDS201A01067 WU25PD .....................................T8
VDS201A01092 WU25PD .....................................T8
VDS201A01100 WU25PD .....................................T8
VDS201A01181 WU25PD .....................................T8
VDS201A01191 WU25PD .....................................T8
VDS201A01200 WU25PD .....................................T8
VDS201A01300 WU25PD .....................................T8
VDS201A01321 WU25PD .....................................T8
VDS201A01397 WU25PD .....................................T8
VDS201A01400 WU25PD .....................................T8
VDS201A01500 WU25PD .....................................T8
VDS201A01600 WU25PD .....................................T8
VDS201A01700 WU25PD .....................................T8
VDS201A01800 WU25PD .....................................T8
VDS201A01900 WU25PD .....................................T8
VDS201A01984 WU25PD .....................................T8
VDS201A02000 WU25PD .....................................T8
VDS201A02100 WU25PD .....................................T8
VDS201A02200 WU25PD .....................................T8
VDS201A02300 WU25PD .....................................T8
VDS201A02383 WU25PD .....................................T8
VDS201A02400 WU25PD .....................................T9
VDS201A02439 WU25PD .....................................T9
VDS201A02489 WU25PD .....................................T9
VDS201A02500 WU25PD .....................................T9
VDS201A02578 WU25PD .....................................T9
VDS201A02600 WU25PD .....................................T9
VDS201A02642 WU25PD .....................................T9
VDS201A02700 WU25PD .....................................T9
VDS201A02705 WU25PD .....................................T9
VDS201A02779 WU25PD .....................................T9
VDS201A02800 WU25PD .....................................T9
VDS201A02820 WU25PD .....................................T9
VDS201A02870 WU25PD .....................................T9
VDS201A02900 WU25PD .....................................T9
VDS201A02947 WU25PD .....................................T9
VDS201A03000 WU25PD .....................................T9
VDS201A03048 WU25PD .....................................T9
VDS201A03100 WU25PD .....................................T9
VDS201A03175 WU25PD .....................................T9
VDS201A03200 WU25PD .....................................T9
VDS201A03264 WU25PD .....................................T9
VDS201A03300 WU25PD .....................................T9
VDS201A03400 WU25PD .....................................T9
VDS201A03455 WU25PD .....................................T9
VDS201A03500 WU25PD .....................................T9
VDS201A03571 WU25PD .....................................T9
VDS201A03600 WU25PD .....................................T9
VDS201A03658 WU25PD .....................................T9
VDS201A03700 WU25PD .....................................T9
VDS201A03734 WU25PD .....................................T9
VDS201A03800 WU25PD .....................................T9
VDS201A03900 WU25PD .....................................T9
VDS201A03970 WU25PD .....................................T9
VDS201A04000 WU25PD .....................................T9
VDS201A04039 WU25PD .....................................T9
VDS201A04090 WU25PD .....................................T9
VDS201A04100 WU25PD .....................................T9
VDS201A04200 WU25PD .....................................T9
VDS201A04217 WU25PD .....................................T9
VDS201A04300 WU25PD .....................................T9
VDS201A04366 WU25PD ...................................T10
VDS201A04400 WU25PD ...................................T10
VDS201A04500 WU25PD ...................................T10
VDS201A04600 WU25PD ...................................T10
VDS201A04623 WU25PD ...................................T10
VDS201A04700 WU25PD ...................................T10
VDS201A04763 WU25PD ...................................T10
VDS201A04800 WU25PD ...................................T10
VDS201A04852 WU25PD ...................................T10
VDS201A04900 WU25PD ...................................T10
VDS201A05000 WU25PD ...................................T10
VDS201A05100 WU25PD ...................................T10
VDS201A05106 WU25PD ...................................T10
VDS201A05159 WU25PD ...................................T10
VDS201A05200 WU25PD ...................................T10
VDS201A05300 WU25PD ...................................T10
VDS201A05400 WU25PD ...................................T10
VDS201A05410 WU25PD ...................................T10
VDS201A05500 WU25PD ...................................T10
VDS201A05558 WU25PD ...................................T10
VDS201A05600 WU25PD ...................................T10
VDS201A05616 WU25PD ...................................T10
VDS201A05700 WU25PD ...................................T10
VDS201A05800 WU25PD ...................................T10
VDS201A05900 WU25PD ...................................T10
VDS201A05954 WU25PD ...................................T10
VDS201A06000 WU25PD ...................................T10
VDS201A06100 WU25PD ...................................T10
VDS201A06200 WU25PD ...................................T10
VDS201A06300 WU25PD ...................................T10
VDS201A06350 WU25PD ...................................T10
VDS201A06400 WU25PD ...................................T10
VDS201A06500 WU25PD ...................................T10
VDS201A06528 WU25PD ...................................T10
VDS201A06600 WU25PD ...................................T10
VDS201A06630 WU25PD ...................................T10
VDS201A06700 WU25PD ...................................T10
VDS201A06746 WU25PD ...................................T10
VDS201A06800 WU25PD ...................................T10
VDS201A06900 WU25PD ...................................T10
VDS201A07000 WU25PD ...................................T11
VDS201A07100 WU25PD ...................................T11
VDS201A07145 WU25PD ...................................T11
VDS201A07200 WU25PD ...................................T11
VDS201A07300 WU25PD ...................................T11
VDS201A07400 WU25PD ...................................T11
VDS201A07500 WU25PD ...................................T11
VDS201A07541 WU25PD ...................................T11
VDS201A07600 WU25PD ...................................T11
VDS201A07700 WU25PD ...................................T11
VDS201A07800 WU25PD ...................................T11
VDS201A07900 WU25PD ...................................T11
VDS201A07938 WU25PD ...................................T11
VDS201A08000 WU25PD ...................................T11
VDS201A08100 WU25PD ...................................T11
VDS201A08200 WU25PD ...................................T11
VDS201A08300 WU25PD ...................................T11
VDS201A08334 WU25PD ...................................T11
VDS201A08400 WU25PD ...................................T11
VDS201A08433 WU25PD ...................................T11
VDS201A08500 WU25PD ...................................T11
VDS201A08600 WU25PD ...................................T11
VDS201A08700 WU25PD ...................................T11
VDS201A08733 WU25PD ...................................T11
VDS201A08800 WU25PD ...................................T11
VDS201A08900 WU25PD ...................................T11
VDS201A09000 WU25PD ...................................T11
VDS201A09100 WU25PD ...................................T11
VDS201A09129 WU25PD ...................................T11
VDS201A09200 WU25PD ...................................T11
VDS201A09300 WU25PD ...................................T11
VDS201A09347 WU25PD ...................................T11
VDS201A09400 WU25PD ...................................T11
VDS201A09500 WU25PD ...................................T11
VDS201A09525 WU25PD ...................................T11
VDS201A09600 WU25PD ...................................T11
VDS201A09700 WU25PD ...................................T11
VDS201A09800 WU25PD ...................................T11
VDS201A09900 WU25PD ...................................T11
VDS201A09921 WU25PD ...................................T11
VDS201A10000 WU25PD ...................................T12
VDS201A10100 WU25PD ...................................T12
VDS201A10200 WU25PD ...................................T12
VDS201A10300 WU25PD ...................................T12
VDS201A10320 WU25PD ...................................T12
VDS201A10400 WU25PD ...................................T12
VDS201A10500 WU25PD ...................................T12
VDS201A10600 WU25PD ...................................T12
VDS201A10700 WU25PD ...................................T12
VDS201A10716 WU25PD ...................................T12
VDS201A10800 WU25PD ...................................T12
VDS201A10900 WU25PD ...................................T12
VDS201A11000 WU25PD ...................................T12
VDS201A11100 WU25PD ...................................T12
VDS201A11113 WU25PD ...................................T12
VDS201A11200 WU25PD ...................................T12
VDS201A11300 WU25PD ...................................T12
VDS201A11400 WU25PD ...................................T12
VDS201A11500 WU25PD ...................................T12
VDS201A11509 WU25PD ...................................T12
VDS201A11600 WU25PD ...................................T12
VDS201A11700 WU25PD ...................................T12
VDS201A11800 WU25PD ...................................T12
VDS201A11900 WU25PD ...................................T12
VDS201A11908 WU25PD ...................................T12
VDS201A12000 WU25PD ...................................T12
VDS201A12100 WU25PD ...................................T12
VDS201A12200 WU25PD ...................................T12
VDS201A12300 WU25PD ...................................T12
VDS201A12304 WU25PD ...................................T12
VDS201A12400 WU25PD ...................................T12
VDS201A12500 WU25PD ...................................T12
VDS201A12600 WU25PD ...................................T12
VDS201A12700 WU25PD ...................................T12
VDS201A12800 WU25PD ...................................T12
VDS201A12900 WU25PD ...................................T12
VDS201A13000 WU25PD ...................................T12
VDS201A13096 WU25PD ...................................T12
VDS201A13100 WU25PD ...................................T12
VDS201A13200 WU25PD ...................................T12
VDS201A13300 WU25PD ...................................T13
VDS201A13400 WU25PD ...................................T13
VDS201A13500 WU25PD ...................................T13
VDS201A13600 WU25PD ...................................T13
VDS201A13700 WU25PD ...................................T13
VDS201A13800 WU25PD ...................................T13
VDS201A13891 WU25PD ...................................T13
VDS201A13900 WU25PD ...................................T13
VDS201A14000 WU25PD ...................................T13
VDS201A14100 WU25PD ...................................T13
VDS201A14200 WU25PD ...................................T13
VDS201A14288 WU25PD ...................................T13
VDS201A14300 WU25PD ...................................T13
VDS201A14400 WU25PD ...................................T13
VDS201A14500 WU25PD ...................................T13
VDS201A14600 WU25PD ...................................T13
VDS201A14684 WU25PD ...................................T13
VDS201A14700 WU25PD ...................................T13
VDS201A14800 WU25PD ...................................T13
VDS201A14900 WU25PD ...................................T13
VDS201A15000 WU25PD ...................................T13
VDS201A15083 WU25PD ...................................T13
VDS201A15100 WU25PD ...................................T13
VDS201A15200 WU25PD ...................................T13
VDS201A15300 WU25PD ...................................T13
VDS201A15400 WU25PD ...................................T13
VDS201A15479 WU25PD ...................................T13
VDS201A15500 WU25PD ...................................T13
VDS201A15600 WU25PD ...................................T13
VDS201A15700 WU25PD ...................................T13
VDS201A15800 WU25PD ...................................T13
VDS201A15875 WU25PD ...................................T13
VDS201A15900 WU25PD ...................................T13
VDS201A16000 WU25PD ...................................T13
VDS201A16100 WU25PD ...................................T13
VDS201A16200 WU25PD ...................................T13
VDS201A16271 WU25PD ...................................T13
VDS201A16300 WU25PD ...................................T13
VDS201A16400 WU25PD ...................................T13
VDS201A16500 WU25PD ...................................T13
VDS201A16600 WU25PD ...................................T14
VDS201A16670 WU25PD ...................................T14
VDS201A16700 WU25PD ...................................T14
VDS201A16800 WU25PD ...................................T14
VDS201A16900 WU25PD ...................................T14
VDS201A17000 WU25PD ...................................T14
VDS201A17100 WU25PD ...................................T14
VDS201A17200 WU25PD ...................................T14
VDS201A17300 WU25PD ...................................T14
VDS201A17400 WU25PD ...................................T14
VDS201A17463 WU25PD ...................................T14
VDS201A17500 WU25PD ...................................T14
VDS201A17600 WU25PD ...................................T14
VDS201A17700 WU25PD ...................................T14
VDS201A17800 WU25PD ...................................T14
VDS201A17859 WU25PD ...................................T14
VDS201A17900 WU25PD ...................................T14
VDS201A18000 WU25PD ...................................T14
Catalogue No. Page(s) Catalogue No. Page(s) Catalogue No. Page(s)
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 132 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRANDO b 28 20153 09PM
Z133
widia.com
Index by Catalogue Number
Catalogue No. Page(s)
VDS201A18100 WU25PD ...................................T14
VDS201A18200 WU25PD ...................................T14
VDS201A18258 WU25PD ...................................T14
VDS201A18300 WU25PD ...................................T14
VDS201A18400 WU25PD ...................................T14
VDS201A18500 WU25PD ...................................T14
VDS201A18600 WU25PD ...................................T14
VDS201A18654 WU25PD ...................................T14
VDS201A18700 WU25PD ...................................T14
VDS201A18800 WU25PD ...................................T14
VDS201A18900 WU25PD ...................................T14
VDS201A19000 WU25PD ...................................T14
VDS201A19050 WU25PD ...................................T14
VDS201A19100 WU25PD ...................................T14
VDS201A19200 WU25PD ...................................T14
VDS201A19300 WU25PD ...................................T14
VDS201A19400 WU25PD ...................................T14
VDS201A19500 WU25PD ...................................T14
VDS201A19600 WU25PD ...................................T14
VDS201A19700 WU25PD ...................................T14
VDS201A19800 WU25PD ...................................T14
VDS201A19900 WU25PD ...................................T14
VDS201A20000 WU25PD ...................................T14
VDS201F03000 WU25PD ...................................T29
VDS201F03100 WU25PD ...................................T29
VDS201F03200 WU25PD ...................................T29
VDS201F03300 WU25PD ...................................T29
VDS201F03400 WU25PD ...................................T29
VDS201F03500 WU25PD ...................................T29
VDS201F03600 WU25PD ...................................T29
VDS201F03700 WU25PD ...................................T29
VDS201F03800 WU25PD ...................................T29
VDS201F03900 WU25PD ...................................T29
VDS201F04000 WU25PD ...................................T29
VDS201F04100 WU25PD ...................................T29
VDS201F04200 WU25PD ...................................T29
VDS201F04300 WU25PD ...................................T29
VDS201F04400 WU25PD ...................................T29
VDS201F04500 WU25PD ...................................T29
VDS201F04600 WU25PD ...................................T29
VDS201F04700 WU25PD ...................................T29
VDS201F04800 WU25PD ...................................T29
VDS201F04900 WU25PD ...................................T29
VDS201F05000 WU25PD ...................................T29
VDS201F05100 WU25PD ...................................T29
VDS201F05200 WU25PD ...................................T29
VDS201F05300 WU25PD ...................................T29
VDS201F05400 WU25PD ...................................T30
VDS201F05500 WU25PD ...................................T30
VDS201F05600 WU25PD ...................................T30
VDS201F05700 WU25PD ...................................T30
VDS201F05800 WU25PD ...................................T30
VDS201F05900 WU25PD ...................................T30
VDS201F06000 WU25PD ...................................T30
VDS201F06100 WU25PD ...................................T30
VDS201F06200 WU25PD ...................................T30
VDS201F06300 WU25PD ...................................T30
VDS201F06400 WU25PD ...................................T30
VDS201F06500 WU25PD ...................................T30
VDS201F06600 WU25PD ...................................T30
VDS201F06700 WU25PD ...................................T30
VDS201F06800 WU25PD ...................................T30
VDS201F06900 WU25PD ...................................T30
VDS201F07000 WU25PD ...................................T30
VDS201F07100 WU25PD ...................................T30
VDS201F07200 WU25PD ...................................T30
VDS201F07300 WU25PD ...................................T30
VDS201F07400 WU25PD ...................................T30
VDS201F07500 WU25PD ...................................T30
VDS201F07600 WU25PD ...................................T30
VDS201F07700 WU25PD ...................................T30
VDS201F07800 WU25PD ...................................T30
VDS201F07900 WU25PD ...................................T30
VDS201F08000 WU25PD ...................................T30
VDS201F08100 WU25PD ...................................T30
VDS201F08200 WU25PD ...................................T30
VDS201F08300 WU25PD ...................................T30
VDS201F08400 WU25PD ...................................T30
VDS201F08500 WU25PD ...................................T30
VDS201F08600 WU25PD ...................................T30
VDS201F08700 WU25PD ...................................T30
VDS201F08800 WU25PD ...................................T30
VDS201F08900 WU25PD ...................................T30
VDS201F09000 WU25PD ...................................T30
VDS201F09100 WU25PD ...................................T30
VDS201F09200 WU25PD ...................................T30
VDS201F09300 WU25PD ...................................T30
VDS201F09400 WU25PD ...................................T31
VDS201F09500 WU25PD ...................................T31
VDS201F09600 WU25PD ...................................T31
VDS201F09700 WU25PD ...................................T31
VDS201F09800 WU25PD ...................................T31
VDS201F09900 WU25PD ...................................T31
VDS201F10000 WU25PD ...................................T31
VDS201F10100 WU25PD ...................................T31
VDS201F10200 WU25PD ...................................T31
VDS201F10300 WU25PD ...................................T31
VDS201F10400 WU25PD ...................................T31
VDS201F10500 WU25PD ...................................T31
VDS201F10600 WU25PD ...................................T31
VDS201F10700 WU25PD ...................................T31
VDS201F10800 WU25PD ...................................T31
VDS201F10900 WU25PD ...................................T31
VDS201F11000 WU25PD ...................................T31
VDS201F11100 WU25PD ...................................T31
VDS201F11200 WU25PD ...................................T31
VDS201F11300 WU25PD ...................................T31
VDS201F11400 WU25PD ...................................T31
VDS201F11500 WU25PD ...................................T31
VDS201F11600 WU25PD ...................................T31
VDS201F11700 WU25PD ...................................T31
VDS201F11800 WU25PD ...................................T31
VDS201F11900 WU25PD ...................................T31
VDS201F12000 WU25PD ...................................T31
VDS201F12100 WU25PD ...................................T31
VDS201F12200 WU25PD ...................................T31
VDS201F12300 WU25PD ...................................T31
VDS201F12400 WU25PD ...................................T31
VDS201F12500 WU25PD ...................................T31
VDS201F12600 WU25PD ...................................T31
VDS201F12700 WU25PD ...................................T31
VDS201F12800 WU25PD ...................................T31
VDS201F12900 WU25PD ...................................T31
VDS201F13000 WU25PD ...................................T31
VDS201F13100 WU25PD ...................................T31
VDS201F13200 WU25PD ...................................T31
VDS201F13300 WU25PD ...................................T31
VDS201F13400 WU25PD ...................................T32
VDS201F13500 WU25PD ...................................T32
VDS201F13600 WU25PD ...................................T32
VDS201F13700 WU25PD ...................................T32
VDS201F13800 WU25PD ...................................T32
VDS201F13900 WU25PD ...................................T32
VDS201F14000 WU25PD ...................................T32
VDS201F14100 WU25PD ...................................T32
VDS201F14200 WU25PD ...................................T32
VDS201F14300 WU25PD ...................................T32
VDS201F14400 WU25PD ...................................T32
VDS201F14500 WU25PD ...................................T32
VDS201F14600 WU25PD ...................................T32
VDS201F14700 WU25PD ...................................T32
VDS201F14800 WU25PD ...................................T32
VDS201F14900 WU25PD ...................................T32
VDS201F15000 WU25PD ...................................T32
VDS201F15100 WU25PD ...................................T32
VDS201F15200 WU25PD ...................................T32
VDS201F15300 WU25PD ...................................T32
VDS201F15400 WU25PD ...................................T32
VDS201F15500 WU25PD ...................................T32
VDS201F15600 WU25PD ...................................T32
VDS201F15700 WU25PD ...................................T32
VDS201F15800 WU25PD ...................................T32
VDS201F15900 WU25PD ...................................T32
VDS201F16000 WU25PD ...................................T32
VDS201F16100 WU25PD ...................................T32
VDS201F16200 WU25PD ...................................T32
VDS201F16300 WU25PD ...................................T32
VDS201F16400 WU25PD ...................................T32
VDS201F16500 WU25PD ...................................T32
VDS201F16600 WU25PD ...................................T32
VDS201F16700 WU25PD ...................................T32
VDS201F16800 WU25PD ...................................T32
VDS201F16900 WU25PD ...................................T32
VDS201F17000 WU25PD ...................................T32
VDS201F17100 WU25PD ...................................T32
VDS201F17200 WU25PD ...................................T32
VDS201F17300 WU25PD ...................................T32
VDS201F17400 WU25PD ...................................T33
VDS201F17500 WU25PD ...................................T33
VDS201F17600 WU25PD ...................................T33
VDS201F17700 WU25PD ...................................T33
VDS201F17800 WU25PD ...................................T33
VDS201F17900 WU25PD ...................................T33
VDS201F18000 WU25PD ...................................T33
VDS201F18100 WU25PD ...................................T33
VDS201F18200 WU25PD ...................................T33
VDS201F18300 WU25PD ...................................T33
VDS201F18400 WU25PD ...................................T33
VDS201F18500 WU25PD ...................................T33
VDS201F18600 WU25PD ...................................T33
VDS201F18700 WU25PD ...................................T33
VDS201F18800 WU25PD ...................................T33
VDS201F18900 WU25PD ...................................T33
VDS201F19000 WU25PD ...................................T33
VDS201F19100 WU25PD ...................................T33
VDS201F19200 WU25PD ...................................T33
VDS201F19300 WU25PD ...................................T33
VDS201F19400 WU25PD ...................................T33
VDS201F19500 WU25PD ...................................T33
VDS201F19600 WU25PD ...................................T33
VDS201F19700 WU25PD ...................................T33
VDS201F19800 WU25PD ...................................T33
VDS201F19900 WU25PD ...................................T33
VDS201F20000 WU25PD ...................................T33
VDS202A01000 WU25PD ...................................T15
VDS202A01016 WU25PD ...................................T15
VDS202A01041 WU25PD ...................................T15
VDS202A01067 WU25PD ...................................T15
VDS202A01092 WU25PD ...................................T15
VDS202A01100 WU25PD ...................................T15
VDS202A01181 WU25PD ...................................T15
VDS202A01191 WU25PD ...................................T15
VDS202A01200 WU25PD ...................................T15
VDS202A01300 WU25PD ...................................T15
VDS202A01321 WU25PD ...................................T15
VDS202A01397 WU25PD ...................................T15
VDS202A01400 WU25PD ...................................T15
VDS202A01500 WU25PD ...................................T15
VDS202A01600 WU25PD ...................................T15
VDS202A01700 WU25PD ...................................T15
VDS202A01800 WU25PD ...................................T15
VDS202A01900 WU25PD ...................................T15
VDS202A01984 WU25PD ...................................T15
VDS202A02000 WU25PD ...................................T15
VDS202A02100 WU25PD ...................................T15
VDS202A02200 WU25PD ...................................T15
VDS202A02300 WU25PD ...................................T15
VDS202A02383 WU25PD ...................................T15
VDS202A02400 WU25PD ...................................T16
VDS202A02439 WU25PD ...................................T16
VDS202A02489 WU25PD ...................................T16
VDS202A02500 WU25PD ...................................T16
VDS202A02578 WU25PD ...................................T16
VDS202A02600 WU25PD ...................................T16
VDS202A02642 WU25PD ...................................T16
VDS202A02700 WU25PD ...................................T16
VDS202A02705 WU25PD ...................................T16
VDS202A02779 WU25PD ...................................T16
VDS202A02800 WU25PD ...................................T16
VDS202A02820 WU25PD ...................................T16
VDS202A02870 WU25PD ...................................T16
VDS202A02900 WU25PD ...................................T16
VDS202A02947 WU25PD ...................................T16
VDS202A03000 WU25PD ...................................T16
VDS202A03048 WU25PD ...................................T16
VDS202A03100 WU25PD ...................................T16
VDS202A03175 WU25PD ...................................T16
VDS202A03200 WU25PD ...................................T16
VDS202A03264 WU25PD ...................................T16
VDS202A03300 WU25PD ...................................T16
VDS202A03400 WU25PD ...................................T16
VDS202A03455 WU25PD ...................................T16
VDS202A03500 WU25PD ...................................T16
VDS202A03571 WU25PD ...................................T16
VDS202A03600 WU25PD ...................................T16
VDS202A03658 WU25PD ...................................T16
VDS202A03700 WU25PD ...................................T16
VDS202A03734 WU25PD ...................................T16
VDS202A03800 WU25PD ...................................T16
VDS202A03900 WU25PD ...................................T16
VDS202A03970 WU25PD ...................................T16
VDS202A04000 WU25PD ...................................T16
VDS202A04039 WU25PD ...................................T16
VDS202A04090 WU25PD ...................................T16
VDS202A04100 WU25PD ...................................T16
VDS202A04200 WU25PD ...................................T16
VDS202A04217 WU25PD ...................................T16
VDS202A04300 WU25PD ...................................T16
VDS202A04366 WU25PD ...................................T17
VDS202A04400 WU25PD ...................................T17
VDS202A04500 WU25PD ...................................T17
VDS202A04600 WU25PD ...................................T17
VDS202A04623 WU25PD ...................................T17
VDS202A04700 WU25PD ...................................T17
VDS202A04763 WU25PD ...................................T17
VDS202A04800 WU25PD ...................................T17
VDS202A04852 WU25PD ...................................T17
VDS202A04900 WU25PD ...................................T17
VDS202A05000 WU25PD ...................................T17
VDS202A05100 WU25PD ...................................T17
VDS202A05106 WU25PD ...................................T17
VDS202A05159 WU25PD ...................................T17
Catalogue No. Page(s) Catalogue No. Page(s) Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 133 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRAND O b 28 2015 3 09 PM
Z134 widia.com
Index by Catalogue Number
Index
Catalogue No. Page(s)
VDS202A05200 WU25PD ...................................T17
VDS202A05300 WU25PD ...................................T17
VDS202A05400 WU25PD ...................................T17
VDS202A05410 WU25PD ...................................T17
VDS202A05500 WU25PD ...................................T17
VDS202A05558 WU25PD ...................................T17
VDS202A05600 WU25PD ...................................T17
VDS202A05616 WU25PD ...................................T17
VDS202A05700 WU25PD ...................................T17
VDS202A05800 WU25PD ...................................T17
VDS202A05900 WU25PD ...................................T17
VDS202A05954 WU25PD ...................................T17
VDS202A06000 WU25PD ...................................T17
VDS202A06100 WU25PD ...................................T17
VDS202A06200 WU25PD ...................................T17
VDS202A06300 WU25PD ...................................T17
VDS202A06350 WU25PD ...................................T17
VDS202A06400 WU25PD ...................................T17
VDS202A06500 WU25PD ...................................T17
VDS202A06528 WU25PD ...................................T17
VDS202A06600 WU25PD ...................................T17
VDS202A06630 WU25PD ...................................T17
VDS202A06700 WU25PD ...................................T17
VDS202A06746 WU25PD ...................................T17
VDS202A06800 WU25PD ...................................T17
VDS202A06900 WU25PD ...................................T17
VDS202A07000 WU25PD ...................................T18
VDS202A07100 WU25PD ...................................T18
VDS202A07145 WU25PD ...................................T18
VDS202A07200 WU25PD ...................................T18
VDS202A07300 WU25PD ...................................T18
VDS202A07400 WU25PD ...................................T18
VDS202A07500 WU25PD ...................................T18
VDS202A07541 WU25PD ...................................T18
VDS202A07600 WU25PD ...................................T18
VDS202A07700 WU25PD ...................................T18
VDS202A07800 WU25PD ...................................T18
VDS202A07900 WU25PD ...................................T18
VDS202A07938 WU25PD ...................................T18
VDS202A08000 WU25PD ...................................T18
VDS202A08100 WU25PD ...................................T18
VDS202A08200 WU25PD ...................................T18
VDS202A08300 WU25PD ...................................T18
VDS202A08334 WU25PD ...................................T18
VDS202A08400 WU25PD ...................................T18
VDS202A08433 WU25PD ...................................T18
VDS202A08500 WU25PD ...................................T18
VDS202A08600 WU25PD ...................................T18
VDS202A08700 WU25PD ...................................T18
VDS202A08733 WU25PD ...................................T18
VDS202A08800 WU25PD ...................................T18
VDS202A08900 WU25PD ...................................T18
VDS202A09000 WU25PD ...................................T18
VDS202A09100 WU25PD ...................................T18
VDS202A09129 WU25PD ...................................T18
VDS202A09200 WU25PD ...................................T18
VDS202A09300 WU25PD ...................................T18
VDS202A09347 WU25PD ...................................T18
VDS202A09400 WU25PD ...................................T18
VDS202A09500 WU25PD ...................................T18
VDS202A09525 WU25PD ...................................T18
VDS202A09600 WU25PD ...................................T18
VDS202A09700 WU25PD ...................................T18
VDS202A09800 WU25PD ...................................T18
VDS202A09900 WU25PD ...................................T18
VDS202A09921 WU25PD ...................................T18
VDS202A10000 WU25PD ...................................T19
VDS202A10100 WU25PD ...................................T19
VDS202A10200 WU25PD ...................................T19
VDS202A10300 WU25PD ...................................T19
VDS202A10320 WU25PD ...................................T19
VDS202A10400 WU25PD ...................................T19
VDS202A10500 WU25PD ...................................T19
VDS202A10600 WU25PD ...................................T19
VDS202A10700 WU25PD ...................................T19
VDS202A10716 WU25PD ...................................T19
VDS202A10800 WU25PD ...................................T19
VDS202A10900 WU25PD ...................................T19
VDS202A11000 WU25PD ...................................T19
VDS202A11100 WU25PD ...................................T19
VDS202A11113 WU25PD ...................................T19
VDS202A11200 WU25PD ...................................T19
VDS202A11300 WU25PD ...................................T19
VDS202A11400 WU25PD ...................................T19
VDS202A11500 WU25PD ...................................T19
VDS202A11509 WU25PD ...................................T19
VDS202A11600 WU25PD ...................................T19
VDS202A11700 WU25PD ...................................T19
VDS202A11800 WU25PD ...................................T19
VDS202A11900 WU25PD ...................................T19
VDS202A11908 WU25PD ...................................T19
VDS202A12000 WU25PD ...................................T19
VDS202A12100 WU25PD ...................................T19
VDS202A12200 WU25PD ...................................T19
VDS202A12300 WU25PD ...................................T19
VDS202A12304 WU25PD ...................................T19
VDS202A12400 WU25PD ...................................T19
VDS202A12500 WU25PD ...................................T19
VDS202A12600 WU25PD ...................................T19
VDS202A12700 WU25PD ...................................T19
VDS202A12800 WU25PD ...................................T19
VDS202A12900 WU25PD ...................................T19
VDS202A13000 WU25PD ...................................T19
VDS202A13096 WU25PD ...................................T19
VDS202A13100 WU25PD ...................................T19
VDS202A13200 WU25PD ...................................T19
VDS202A13300 WU25PD ...................................T20
VDS202A13400 WU25PD ...................................T20
VDS202A13500 WU25PD ...................................T20
VDS202A13600 WU25PD ...................................T20
VDS202A13700 WU25PD ...................................T20
VDS202A13800 WU25PD ...................................T20
VDS202A13891 WU25PD ...................................T20
VDS202A13900 WU25PD ...................................T20
VDS202A14000 WU25PD ...................................T20
VDS202A14100 WU25PD ...................................T20
VDS202A14200 WU25PD ...................................T20
VDS202A14288 WU25PD ...................................T20
VDS202A14300 WU25PD ...................................T20
VDS202A14400 WU25PD ...................................T20
VDS202A14500 WU25PD ...................................T20
VDS202A14600 WU25PD ...................................T20
VDS202A14684 WU25PD ...................................T20
VDS202A14700 WU25PD ...................................T20
VDS202A14800 WU25PD ...................................T20
VDS202A14900 WU25PD ...................................T20
VDS202A15000 WU25PD ...................................T20
VDS202A15083 WU25PD ...................................T20
VDS202A15100 WU25PD ...................................T20
VDS202A15200 WU25PD ...................................T20
VDS202A15300 WU25PD ...................................T20
VDS202A15400 WU25PD ...................................T20
VDS202A15479 WU25PD ...................................T20
VDS202A15500 WU25PD ...................................T20
VDS202A15600 WU25PD ...................................T20
VDS202A15700 WU25PD ...................................T20
VDS202A15800 WU25PD ...................................T20
VDS202A15875 WU25PD ...................................T20
VDS202A15900 WU25PD ...................................T20
VDS202A16000 WU25PD ...................................T20
VDS202A16100 WU25PD ...................................T20
VDS202A16200 WU25PD ...................................T20
VDS202A16271 WU25PD ...................................T20
VDS202A16300 WU25PD ...................................T20
VDS202A16400 WU25PD ...................................T20
VDS202A16500 WU25PD ...................................T20
VDS202A16600 WU25PD ...................................T21
VDS202A16670 WU25PD ...................................T21
VDS202A16700 WU25PD ...................................T21
VDS202A16800 WU25PD ...................................T21
VDS202A16900 WU25PD ...................................T21
VDS202A17000 WU25PD ...................................T21
VDS202A17100 WU25PD ...................................T21
VDS202A17200 WU25PD ...................................T21
VDS202A17300 WU25PD ...................................T21
VDS202A17400 WU25PD ...................................T21
VDS202A17463 WU25PD ...................................T21
VDS202A17500 WU25PD ...................................T21
VDS202A17600 WU25PD ...................................T21
VDS202A17700 WU25PD ...................................T21
VDS202A17800 WU25PD ...................................T21
VDS202A17859 WU25PD ...................................T21
VDS202A17900 WU25PD ...................................T21
VDS202A18000 WU25PD ...................................T21
VDS202A18100 WU25PD ...................................T21
VDS202A18200 WU25PD ...................................T21
VDS202A18258 WU25PD ...................................T21
VDS202A18300 WU25PD ...................................T21
VDS202A18400 WU25PD ...................................T21
VDS202A18500 WU25PD ...................................T21
VDS202A18600 WU25PD ...................................T21
VDS202A18654 WU25PD ...................................T21
VDS202A18700 WU25PD ...................................T21
VDS202A18800 WU25PD ...................................T21
VDS202A18900 WU25PD ...................................T21
VDS202A19000 WU25PD ...................................T21
VDS202A19050 WU25PD ...................................T21
VDS202A19100 WU25PD ...................................T21
VDS202A19200 WU25PD ...................................T21
VDS202A19300 WU25PD ...................................T21
VDS202A19400 WU25PD ...................................T21
VDS202A19500 WU25PD ...................................T21
VDS202A19600 WU25PD ...................................T21
VDS202A19700 WU25PD ...................................T21
VDS202A19800 WU25PD ...................................T21
VDS202A19900 WU25PD ...................................T21
VDS202A20000 WU25PD ...................................T21
VDS202F03000 WU25PD ...................................T34
VDS202F03100 WU25PD ...................................T34
VDS202F03200 WU25PD ...................................T34
VDS202F03300 WU25PD ...................................T34
VDS202F03400 WU25PD ...................................T34
VDS202F03500 WU25PD ...................................T34
VDS202F03600 WU25PD ...................................T34
VDS202F03700 WU25PD ...................................T34
VDS202F03800 WU25PD ...................................T34
VDS202F03900 WU25PD ...................................T34
VDS202F04000 WU25PD ...................................T34
VDS202F04100 WU25PD ...................................T34
VDS202F04200 WU25PD ...................................T34
VDS202F04300 WU25PD ...................................T34
VDS202F04400 WU25PD ...................................T34
VDS202F04500 WU25PD ...................................T34
VDS202F04600 WU25PD ...................................T34
VDS202F04700 WU25PD ...................................T34
VDS202F04800 WU25PD ...................................T34
VDS202F04900 WU25PD ...................................T34
VDS202F05000 WU25PD ...................................T34
VDS202F05100 WU25PD ...................................T34
VDS202F05200 WU25PD ...................................T34
VDS202F05300 WU25PD ...................................T34
VDS202F05400 WU25PD ...................................T35
VDS202F05500 WU25PD ...................................T35
VDS202F05600 WU25PD ...................................T35
VDS202F05700 WU25PD ...................................T35
VDS202F05800 WU25PD ...................................T35
VDS202F05900 WU25PD ...................................T35
VDS202F06000 WU25PD ...................................T35
VDS202F06100 WU25PD ...................................T35
VDS202F06200 WU25PD ...................................T35
VDS202F06300 WU25PD ...................................T35
VDS202F06400 WU25PD ...................................T35
VDS202F06500 WU25PD ...................................T35
VDS202F06600 WU25PD ...................................T35
VDS202F06700 WU25PD ...................................T35
VDS202F06800 WU25PD ...................................T35
VDS202F06900 WU25PD ...................................T35
VDS202F07000 WU25PD ...................................T35
VDS202F07100 WU25PD ...................................T35
VDS202F07200 WU25PD ...................................T35
VDS202F07300 WU25PD ...................................T35
VDS202F07400 WU25PD ...................................T35
VDS202F07500 WU25PD ...................................T35
VDS202F07600 WU25PD ...................................T35
VDS202F07700 WU25PD ...................................T35
VDS202F07800 WU25PD ...................................T35
VDS202F07900 WU25PD ...................................T35
VDS202F08000 WU25PD ...................................T35
VDS202F08100 WU25PD ...................................T35
VDS202F08200 WU25PD ...................................T35
VDS202F08300 WU25PD ...................................T35
VDS202F08400 WU25PD ...................................T35
VDS202F08500 WU25PD ...................................T35
VDS202F08600 WU25PD ...................................T35
VDS202F08700 WU25PD ...................................T35
VDS202F08800 WU25PD ...................................T35
VDS202F08900 WU25PD ...................................T35
VDS202F09000 WU25PD ...................................T35
VDS202F09100 WU25PD ...................................T35
VDS202F09200 WU25PD ...................................T35
VDS202F09300 WU25PD ...................................T35
VDS202F09400 WU25PD ...................................T36
VDS202F09500 WU25PD ...................................T36
VDS202F09600 WU25PD ...................................T36
VDS202F09700 WU25PD ...................................T36
VDS202F09800 WU25PD ...................................T36
VDS202F09900 WU25PD ...................................T36
VDS202F10000 WU25PD ...................................T36
VDS202F10100 WU25PD ...................................T36
VDS202F10200 WU25PD ...................................T36
VDS202F10300 WU25PD ...................................T36
VDS202F10400 WU25PD ...................................T36
VDS202F10500 WU25PD ...................................T36
VDS202F10600 WU25PD ...................................T36
VDS202F10700 WU25PD ...................................T36
VDS202F10800 WU25PD ...................................T36
VDS202F10900 WU25PD ...................................T36
VDS202F11000 WU25PD ...................................T36
VDS202F11100 WU25PD ...................................T36
VDS202F11200 WU25PD ...................................T36
VDS202F11300 WU25PD ...................................T36
VDS202F11400 WU25PD ...................................T36
Catalogue No. Page(s) Catalogue No. Page(s) Catalogue No. Page(s)
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 134 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRANDO b 28 20153 09PM
Z135
widia.com
Index by Catalogue Number
Catalogue No. Page(s)
VDS202F11500 WU25PD ...................................T36
VDS202F11600 WU25PD ...................................T36
VDS202F11700 WU25PD ...................................T36
VDS202F11800 WU25PD ...................................T36
VDS202F11900 WU25PD ...................................T36
VDS202F12000 WU25PD ...................................T36
VDS202F12100 WU25PD ...................................T36
VDS202F12200 WU25PD ...................................T36
VDS202F12300 WU25PD ...................................T36
VDS202F12400 WU25PD ...................................T36
VDS202F12500 WU25PD ...................................T36
VDS202F12600 WU25PD ...................................T36
VDS202F12700 WU25PD ...................................T36
VDS202F12800 WU25PD ...................................T36
VDS202F12900 WU25PD ...................................T36
VDS202F13000 WU25PD ...................................T36
VDS202F13100 WU25PD ...................................T36
VDS202F13200 WU25PD ...................................T36
VDS202F13300 WU25PD ...................................T36
VDS202F13400 WU25PD ...................................T37
VDS202F13500 WU25PD ...................................T37
VDS202F13600 WU25PD ...................................T37
VDS202F13700 WU25PD ...................................T37
VDS202F13800 WU25PD ...................................T37
VDS202F13900 WU25PD ...................................T37
VDS202F14000 WU25PD ...................................T37
VDS202F14100 WU25PD ...................................T37
VDS202F14200 WU25PD ...................................T37
VDS202F14300 WU25PD ...................................T37
VDS202F14400 WU25PD ...................................T37
VDS202F14500 WU25PD ...................................T37
VDS202F14600 WU25PD ...................................T37
VDS202F14700 WU25PD ...................................T37
VDS202F14800 WU25PD ...................................T37
VDS202F14900 WU25PD ...................................T37
VDS202F15000 WU25PD ...................................T37
VDS202F15100 WU25PD ...................................T37
VDS202F15200 WU25PD ...................................T37
VDS202F15300 WU25PD ...................................T37
VDS202F15400 WU25PD ...................................T37
VDS202F15500 WU25PD ...................................T37
VDS202F15600 WU25PD ...................................T37
VDS202F15700 WU25PD ...................................T37
VDS202F15800 WU25PD ...................................T37
VDS202F15900 WU25PD ...................................T37
VDS202F16000 WU25PD ...................................T37
VDS202F16100 WU25PD ...................................T37
VDS202F16200 WU25PD ...................................T37
VDS202F16300 WU25PD ...................................T37
VDS202F16400 WU25PD ...................................T37
VDS202F16500 WU25PD ...................................T37
VDS202F16600 WU25PD ...................................T37
VDS202F16700 WU25PD ...................................T37
VDS202F16800 WU25PD ...................................T37
VDS202F16900 WU25PD ...................................T37
VDS202F17000 WU25PD ...................................T37
VDS202F17100 WU25PD ...................................T37
VDS202F17200 WU25PD ...................................T37
VDS202F17300 WU25PD ...................................T37
VDS202F17400 WU25PD ...................................T38
VDS202F17500 WU25PD ...................................T38
VDS202F17600 WU25PD ...................................T38
VDS202F17700 WU25PD ...................................T38
VDS202F17800 WU25PD ...................................T38
VDS202F17900 WU25PD ...................................T38
VDS202F18000 WU25PD ...................................T38
VDS202F18100 WU25PD ...................................T38
VDS202F18200 WU25PD ...................................T38
VDS202F18300 WU25PD ...................................T38
VDS202F18400 WU25PD ...................................T38
VDS202F18500 WU25PD ...................................T38
VDS202F18600 WU25PD ...................................T38
VDS202F18700 WU25PD ...................................T38
VDS202F18800 WU25PD ...................................T38
VDS202F18900 WU25PD ...................................T38
VDS202F19000 WU25PD ...................................T38
VDS202F19100 WU25PD ...................................T38
VDS202F19200 WU25PD ...................................T38
VDS202F19300 WU25PD ...................................T38
VDS202F19400 WU25PD ...................................T38
VDS202F19500 WU25PD ...................................T38
VDS202F19600 WU25PD ...................................T38
VDS202F19700 WU25PD ...................................T38
VDS202F19800 WU25PD ...................................T38
VDS202F19900 WU25PD ...................................T38
VDS202F20000 WU25PD ...................................T38
VDS401A01500 WU25PD .....................................T8
VDS401A01600 WU25PD .....................................T8
VDS401A01700 WU25PD .....................................T8
VDS401A01800 WU25PD .....................................T8
VDS401A01900 WU25PD .....................................T8
VDS401A01984 WU25PD .....................................T8
VDS401A02000 WU25PD .....................................T8
VDS401A02100 WU25PD .....................................T8
VDS401A02200 WU25PD .....................................T8
VDS401A02300 WU25PD .....................................T8
VDS401A02383 WU25PD .....................................T8
VDS401A02400 WU25PD .....................................T9
VDS401A02439 WU25PD .....................................T9
VDS401A02489 WU25PD .....................................T9
VDS401A02500 WU25PD .....................................T9
VDS401A02578 WU25PD .....................................T9
VDS401A02600 WU25PD .....................................T9
VDS401A02642 WU25PD .....................................T9
VDS401A02700 WU25PD .....................................T9
VDS401A02705 WU25PD .....................................T9
VDS401A02779 WU25PD .....................................T9
VDS401A02800 WU25PD .....................................T9
VDS401A02820 WU25PD .....................................T9
VDS401A02870 WU25PD .....................................T9
VDS401A02900 WU25PD .....................................T9
VDS401A02947 WU25PD .....................................T9
VDS401A03000 WU25PD .....................................T9
VDS401A03048 WU25PD .....................................T9
VDS401A03100 WU25PD .....................................T9
VDS401A03175 WU25PD .....................................T9
VDS401A03200 WU25PD .....................................T9
VDS401A03264 WU25PD .....................................T9
VDS401A03300 WU25PD .....................................T9
VDS401A03400 WU25PD .....................................T9
VDS401A03455 WU25PD .....................................T9
VDS401A03500 WU25PD .....................................T9
VDS401A03571 WU25PD .....................................T9
VDS401A03600 WU25PD .....................................T9
VDS401A03658 WU25PD .....................................T9
VDS401A03700 WU25PD .....................................T9
VDS401A03734 WU25PD .....................................T9
VDS401A03800 WU25PD .....................................T9
VDS401A03900 WU25PD .....................................T9
VDS401A03970 WU25PD .....................................T9
VDS401A04000 WU25PD .....................................T9
VDS401A04039 WU25PD .....................................T9
VDS401A04090 WU25PD .....................................T9
VDS401A04100 WU25PD .....................................T9
VDS401A04200 WU25PD .....................................T9
VDS401A04217 WU25PD .....................................T9
VDS401A04300 WU25PD .....................................T9
VDS401A04366 WU25PD ...................................T10
VDS401A04400 WU25PD ...................................T10
VDS401A04500 WU25PD ...................................T10
VDS401A04600 WU25PD ...................................T10
VDS401A04623 WU25PD ...................................T10
VDS401A04700 WU25PD ...................................T10
VDS401A04763 WU25PD ...................................T10
VDS401A04800 WU25PD ...................................T10
VDS401A04852 WU25PD ...................................T10
VDS401A04900 WU25PD ...................................T10
VDS401A05000 WU25PD ...................................T10
VDS401A05100 WU25PD ...................................T10
VDS401A05106 WU25PD ...................................T10
VDS401A05159 WU25PD ...................................T10
VDS401A05200 WU25PD ...................................T10
VDS401A05300 WU25PD ...................................T10
VDS401A05400 WU25PD ...................................T10
VDS401A05410 WU25PD ...................................T10
VDS401A05500 WU25PD ...................................T10
VDS401A05558 WU25PD ...................................T10
VDS401A05600 WU25PD ...................................T10
VDS401A05616 WU25PD ...................................T10
VDS401A05700 WU25PD ...................................T10
VDS401A05800 WU25PD ...................................T10
VDS401A05900 WU25PD ...................................T10
VDS401A05954 WU25PD ...................................T10
VDS401A06000 WU25PD ...................................T10
VDS401A06100 WU25PD ...................................T10
VDS401A06200 WU25PD ...................................T10
VDS401A06300 WU25PD ...................................T10
VDS401A06350 WU25PD ...................................T10
VDS401A06400 WU25PD ...................................T10
VDS401A06500 WU25PD ...................................T10
VDS401A06528 WU25PD ...................................T10
VDS401A06600 WU25PD ...................................T10
VDS401A06630 WU25PD ...................................T10
VDS401A06700 WU25PD ...................................T10
VDS401A06746 WU25PD ...................................T10
VDS401A06800 WU25PD ...................................T10
VDS401A06900 WU25PD ...................................T10
VDS401A07000 WU25PD ...................................T11
VDS401A07100 WU25PD ...................................T11
VDS401A07145 WU25PD ...................................T11
VDS401A07200 WU25PD ...................................T11
VDS401A07300 WU25PD ...................................T11
VDS401A07400 WU25PD ...................................T11
VDS401A07500 WU25PD ...................................T11
VDS401A07541 WU25PD ...................................T11
VDS401A07600 WU25PD ...................................T11
VDS401A07700 WU25PD ...................................T11
VDS401A07800 WU25PD ...................................T11
VDS401A07900 WU25PD ...................................T11
VDS401A07938 WU25PD ...................................T11
VDS401A08000 WU25PD ...................................T11
VDS401A08100 WU25PD ...................................T11
VDS401A08200 WU25PD ...................................T11
VDS401A08300 WU25PD ...................................T11
VDS401A08334 WU25PD ...................................T11
VDS401A08400 WU25PD ...................................T11
VDS401A08433 WU25PD ...................................T11
VDS401A08500 WU25PD ...................................T11
VDS401A08600 WU25PD ...................................T11
VDS401A08700 WU25PD ...................................T11
VDS401A08733 WU25PD ...................................T11
VDS401A08800 WU25PD ...................................T11
VDS401A08900 WU25PD ...................................T11
VDS401A09000 WU25PD ...................................T11
VDS401A09100 WU25PD ...................................T11
VDS401A09129 WU25PD ...................................T11
VDS401A09200 WU25PD ...................................T11
VDS401A09300 WU25PD ...................................T11
VDS401A09347 WU25PD ...................................T11
VDS401A09400 WU25PD ...................................T11
VDS401A09500 WU25PD ...................................T11
VDS401A09525 WU25PD ...................................T11
VDS401A09600 WU25PD ...................................T11
VDS401A09700 WU25PD ...................................T11
VDS401A09800 WU25PD ...................................T11
VDS401A09900 WU25PD ...................................T11
VDS401A09921 WU25PD ...................................T11
VDS401A10000 WU25PD ...................................T12
VDS401A10100 WU25PD ...................................T12
VDS401A10200 WU25PD ...................................T12
VDS401A10300 WU25PD ...................................T12
VDS401A10320 WU25PD ...................................T12
VDS401A10400 WU25PD ...................................T12
VDS401A10500 WU25PD ...................................T12
VDS401A10600 WU25PD ...................................T12
VDS401A10700 WU25PD ...................................T12
VDS401A10716 WU25PD ...................................T12
VDS401A10800 WU25PD ...................................T12
VDS401A10900 WU25PD ...................................T12
VDS401A11000 WU25PD ...................................T12
VDS401A11100 WU25PD ...................................T12
VDS401A11113 WU25PD ...................................T12
VDS401A11200 WU25PD ...................................T12
VDS401A11300 WU25PD ...................................T12
VDS401A11400 WU25PD ...................................T12
VDS401A11500 WU25PD ...................................T12
VDS401A11509 WU25PD ...................................T12
VDS401A11600 WU25PD ...................................T12
VDS401A11700 WU25PD ...................................T12
VDS401A11800 WU25PD ...................................T12
VDS401A11900 WU25PD ...................................T12
VDS401A11908 WU25PD ...................................T12
VDS401A12000 WU25PD ...................................T12
VDS401A12100 WU25PD ...................................T12
VDS401A12200 WU25PD ...................................T12
VDS401A12300 WU25PD ...................................T12
VDS401A12304 WU25PD ...................................T12
VDS401A12400 WU25PD ...................................T12
VDS401A12500 WU25PD ...................................T12
VDS401A12600 WU25PD ...................................T12
VDS401A12700 WU25PD ...................................T12
VDS401A12800 WU25PD ...................................T12
VDS401A12900 WU25PD ...................................T12
VDS401A13000 WU25PD ...................................T12
VDS401A13096 WU25PD ...................................T12
VDS401A13100 WU25PD ...................................T12
VDS401A13200 WU25PD ...................................T12
VDS401A13300 WU25PD ...................................T13
VDS401A13400 WU25PD ...................................T13
VDS401A13500 WU25PD ...................................T13
VDS401A13600 WU25PD ...................................T13
VDS401A13700 WU25PD ...................................T13
VDS401A13800 WU25PD ...................................T13
VDS401A13891 WU25PD ...................................T13
VDS401A13900 WU25PD ...................................T13
VDS401A14000 WU25PD ...................................T13
VDS401A14100 WU25PD ...................................T13
VDS401A14200 WU25PD ...................................T13
VDS401A14288 WU25PD ...................................T13
VDS401A14300 WU25PD ...................................T13
VDS401A14400 WU25PD ...................................T13
VDS401A14500 WU25PD ...................................T13
Catalogue No. Page(s) Catalogue No. Page(s) Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 135 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRAND O b 28 2015 3 09 PM
Z136 widia.com
Index by Catalogue Number
Index
Catalogue No. Page(s)
VDS401A14600 WU25PD ...................................T13
VDS401A14684 WU25PD ...................................T13
VDS401A14700 WU25PD ...................................T13
VDS401A14800 WU25PD ...................................T13
VDS401A14900 WU25PD ...................................T13
VDS401A15000 WU25PD ...................................T13
VDS401A15083 WU25PD ...................................T13
VDS401A15100 WU25PD ...................................T13
VDS401A15200 WU25PD ...................................T13
VDS401A15300 WU25PD ...................................T13
VDS401A15400 WU25PD ...................................T13
VDS401A15479 WU25PD ...................................T13
VDS401A15500 WU25PD ...................................T13
VDS401A15600 WU25PD ...................................T13
VDS401A15700 WU25PD ...................................T13
VDS401A15800 WU25PD ...................................T13
VDS401A15875 WU25PD ...................................T13
VDS401A15900 WU25PD ...................................T13
VDS401A16000 WU25PD ...................................T13
VDS401A16100 WU25PD ...................................T13
VDS401A16200 WU25PD ...................................T13
VDS401A16271 WU25PD ...................................T13
VDS401A16300 WU25PD ...................................T13
VDS401A16400 WU25PD ...................................T13
VDS401A16500 WU25PD ...................................T13
VDS401A16600 WU25PD ...................................T14
VDS401A16670 WU25PD ...................................T14
VDS401A16700 WU25PD ...................................T14
VDS401A16800 WU25PD ...................................T14
VDS401A16900 WU25PD ...................................T14
VDS401A17000 WU25PD ...................................T14
VDS401A17100 WU25PD ...................................T14
VDS401A17200 WU25PD ...................................T14
VDS401A17300 WU25PD ...................................T14
VDS401A17400 WU25PD ...................................T14
VDS401A17463 WU25PD ...................................T14
VDS401A17500 WU25PD ...................................T14
VDS401A17600 WU25PD ...................................T14
VDS401A17700 WU25PD ...................................T14
VDS401A17800 WU25PD ...................................T14
VDS401A17859 WU25PD ...................................T14
VDS401A17900 WU25PD ...................................T14
VDS401A18000 WU25PD ...................................T14
VDS401A18100 WU25PD ...................................T14
VDS401A18200 WU25PD ...................................T14
VDS401A18258 WU25PD ...................................T14
VDS401A18300 WU25PD ...................................T14
VDS401A18400 WU25PD ...................................T14
VDS401A18500 WU25PD ...................................T14
VDS401A18600 WU25PD ...................................T14
VDS401A18654 WU25PD ...................................T14
VDS401A18700 WU25PD ...................................T14
VDS401A18800 WU25PD ...................................T14
VDS401A18900 WU25PD ...................................T14
VDS401A19000 WU25PD ...................................T14
VDS401A19050 WU25PD ...................................T14
VDS401A19100 WU25PD ...................................T14
VDS401A19200 WU25PD ...................................T14
VDS401A19300 WU25PD ...................................T14
VDS401A19400 WU25PD ...................................T14
VDS401A19500 WU25PD ...................................T14
VDS401A19600 WU25PD ...................................T14
VDS401A19700 WU25PD ...................................T14
VDS401A19800 WU25PD ...................................T14
VDS401A19900 WU25PD ...................................T14
VDS401A20000 WU25PD ...................................T14
VDS401F03000 WU25PD ...................................T29
VDS401F03100 WU25PD ...................................T29
VDS401F03200 WU25PD ...................................T29
VDS401F03300 WU25PD ...................................T29
VDS401F03400 WU25PD ...................................T29
VDS401F03500 WU25PD ...................................T29
VDS401F03600 WU25PD ...................................T29
VDS401F03700 WU25PD ...................................T29
VDS401F03800 WU25PD ...................................T29
VDS401F03900 WU25PD ...................................T29
VDS401F04000 WU25PD ...................................T29
VDS401F04100 WU25PD ...................................T29
VDS401F04200 WU25PD ...................................T29
VDS401F04300 WU25PD ...................................T29
VDS401F04400 WU25PD ...................................T29
VDS401F04500 WU25PD ...................................T29
VDS401F04600 WU25PD ...................................T29
VDS401F04700 WU25PD ...................................T29
VDS401F04800 WU25PD ...................................T29
VDS401F04900 WU25PD ...................................T29
VDS401F05000 WU25PD ...................................T29
VDS401F05100 WU25PD ...................................T29
VDS401F05200 WU25PD ...................................T29
VDS401F05300 WU25PD ...................................T29
VDS401F05400 WU25PD ...................................T30
VDS401F05500 WU25PD ...................................T30
VDS401F05600 WU25PD ...................................T30
VDS401F05700 WU25PD ...................................T30
VDS401F05800 WU25PD ...................................T30
VDS401F05900 WU25PD ...................................T30
VDS401F06000 WU25PD ...................................T30
VDS401F06100 WU25PD ...................................T30
VDS401F06200 WU25PD ...................................T30
VDS401F06300 WU25PD ...................................T30
VDS401F06400 WU25PD ...................................T30
VDS401F06500 WU25PD ...................................T30
VDS401F06600 WU25PD ...................................T30
VDS401F06700 WU25PD ...................................T30
VDS401F06800 WU25PD ...................................T30
VDS401F06900 WU25PD ...................................T30
VDS401F07000 WU25PD ...................................T30
VDS401F07100 WU25PD ...................................T30
VDS401F07200 WU25PD ...................................T30
VDS401F07300 WU25PD ...................................T30
VDS401F07400 WU25PD ...................................T30
VDS401F07500 WU25PD ...................................T30
VDS401F07600 WU25PD ...................................T30
VDS401F07700 WU25PD ...................................T30
VDS401F07800 WU25PD ...................................T30
VDS401F07900 WU25PD ...................................T30
VDS401F08000 WU25PD ...................................T30
VDS401F08100 WU25PD ...................................T30
VDS401F08200 WU25PD ...................................T30
VDS401F08300 WU25PD ...................................T30
VDS401F08400 WU25PD ...................................T30
VDS401F08500 WU25PD ...................................T30
VDS401F08600 WU25PD ...................................T30
VDS401F08700 WU25PD ...................................T30
VDS401F08800 WU25PD ...................................T30
VDS401F08900 WU25PD ...................................T30
VDS401F09000 WU25PD ...................................T30
VDS401F09100 WU25PD ...................................T30
VDS401F09200 WU25PD ...................................T30
VDS401F09300 WU25PD ...................................T30
VDS401F09400 WU25PD ...................................T31
VDS401F09500 WU25PD ...................................T31
VDS401F09600 WU25PD ...................................T31
VDS401F09700 WU25PD ...................................T31
VDS401F09800 WU25PD ...................................T31
VDS401F09900 WU25PD ...................................T31
VDS401F10000 WU25PD ...................................T31
VDS401F10100 WU25PD ...................................T31
VDS401F10200 WU25PD ...................................T31
VDS401F10300 WU25PD ...................................T31
VDS401F10400 WU25PD ...................................T31
VDS401F10500 WU25PD ...................................T31
VDS401F10600 WU25PD ...................................T31
VDS401F10700 WU25PD ...................................T31
VDS401F10800 WU25PD ...................................T31
VDS401F10900 WU25PD ...................................T31
VDS401F11000 WU25PD ...................................T31
VDS401F11100 WU25PD ...................................T31
VDS401F11200 WU25PD ...................................T31
VDS401F11300 WU25PD ...................................T31
VDS401F11400 WU25PD ...................................T31
VDS401F11500 WU25PD ...................................T31
VDS401F11600 WU25PD ...................................T31
VDS401F11700 WU25PD ...................................T31
VDS401F11800 WU25PD ...................................T31
VDS401F11900 WU25PD ...................................T31
VDS401F12000 WU25PD ...................................T31
VDS401F12100 WU25PD ...................................T31
VDS401F12200 WU25PD ...................................T31
VDS401F12300 WU25PD ...................................T31
VDS401F12400 WU25PD ...................................T31
VDS401F12500 WU25PD ...................................T31
VDS401F12600 WU25PD ...................................T31
VDS401F12700 WU25PD ...................................T31
VDS401F12800 WU25PD ...................................T31
VDS401F12900 WU25PD ...................................T31
VDS401F13000 WU25PD ...................................T31
VDS401F13100 WU25PD ...................................T31
VDS401F13200 WU25PD ...................................T31
VDS401F13300 WU25PD ...................................T31
VDS401F13400 WU25PD ...................................T32
VDS401F13500 WU25PD ...................................T32
VDS401F13600 WU25PD ...................................T32
VDS401F13700 WU25PD ...................................T32
VDS401F13800 WU25PD ...................................T32
VDS401F13900 WU25PD ...................................T32
VDS401F14000 WU25PD ...................................T32
VDS401F14100 WU25PD ...................................T32
VDS401F14200 WU25PD ...................................T32
VDS401F14300 WU25PD ...................................T32
VDS401F14400 WU25PD ...................................T32
VDS401F14500 WU25PD ...................................T32
VDS401F14600 WU25PD ...................................T32
VDS401F14700 WU25PD ...................................T32
VDS401F14800 WU25PD ...................................T32
VDS401F14900 WU25PD ...................................T32
VDS401F15000 WU25PD ...................................T32
VDS401F15100 WU25PD ...................................T32
VDS401F15200 WU25PD ...................................T32
VDS401F15300 WU25PD ...................................T32
VDS401F15400 WU25PD ...................................T32
VDS401F15500 WU25PD ...................................T32
VDS401F15600 WU25PD ...................................T32
VDS401F15700 WU25PD ...................................T32
VDS401F15800 WU25PD ...................................T32
VDS401F15900 WU25PD ...................................T32
VDS401F16000 WU25PD ...................................T32
VDS401F16100 WU25PD ...................................T32
VDS401F16200 WU25PD ...................................T32
VDS401F16300 WU25PD ...................................T32
VDS401F16400 WU25PD ...................................T32
VDS401F16500 WU25PD ...................................T32
VDS401F16600 WU25PD ...................................T32
VDS401F16700 WU25PD ...................................T32
VDS401F16800 WU25PD ...................................T32
VDS401F16900 WU25PD ...................................T32
VDS401F17000 WU25PD ...................................T32
VDS401F17100 WU25PD ...................................T32
VDS401F17200 WU25PD ...................................T32
VDS401F17300 WU25PD ...................................T32
VDS401F17400 WU25PD ...................................T33
VDS401F17500 WU25PD ...................................T33
VDS401F17600 WU25PD ...................................T33
VDS401F17700 WU25PD ...................................T33
VDS401F17800 WU25PD ...................................T33
VDS401F17900 WU25PD ...................................T33
VDS401F18000 WU25PD ...................................T33
VDS401F18100 WU25PD ...................................T33
VDS401F18200 WU25PD ...................................T33
VDS401F18300 WU25PD ...................................T33
VDS401F18400 WU25PD ...................................T33
VDS401F18500 WU25PD ...................................T33
VDS401F18600 WU25PD ...................................T33
VDS401F18700 WU25PD ...................................T33
VDS401F18800 WU25PD ...................................T33
VDS401F18900 WU25PD ...................................T33
VDS401F19000 WU25PD ...................................T33
VDS401F19100 WU25PD ...................................T33
VDS401F19200 WU25PD ...................................T33
VDS401F19300 WU25PD ...................................T33
VDS401F19400 WU25PD ...................................T33
VDS401F19500 WU25PD ...................................T33
VDS401F19600 WU25PD ...................................T33
VDS401F19700 WU25PD ...................................T33
VDS401F19800 WU25PD ...................................T33
VDS401F19900 WU25PD ...................................T33
VDS401F20000 WU25PD ...................................T33
VDS402A01500 WU25PD ...................................T15
VDS402A01600 WU25PD ...................................T15
VDS402A01700 WU25PD ...................................T15
VDS402A01800 WU25PD ...................................T15
VDS402A01900 WU25PD ...................................T15
VDS402A01984 WU25PD ...................................T15
VDS402A02000 WU25PD ...................................T15
VDS402A02100 WU25PD ...................................T15
VDS402A02200 WU25PD ...................................T15
VDS402A02300 WU25PD ...................................T15
VDS402A02383 WU25PD ...................................T15
VDS402A02400 WU25PD ...................................T16
VDS402A02439 WU25PD ...................................T16
VDS402A02489 WU25PD ...................................T16
VDS402A02500 WU25PD ...................................T16
VDS402A02578 WU25PD ...................................T16
VDS402A02600 WU25PD ...................................T16
VDS402A02642 WU25PD ...................................T16
VDS402A02700 WU25PD ...................................T16
VDS402A02705 WU25PD ...................................T16
VDS402A02779 WU25PD ...................................T16
VDS402A02800 WU25PD ...................................T16
VDS402A02820 WU25PD ...................................T16
VDS402A02870 WU25PD ...................................T16
VDS402A02900 WU25PD ...................................T16
VDS402A02947 WU25PD ...................................T16
VDS402A03000 WU25PD ...................................T16
VDS402A03048 WU25PD ...................................T16
VDS402A03100 WU25PD ...................................T16
VDS402A03175 WU25PD ...................................T16
VDS402A03200 WU25PD ...................................T16
VDS402A03264 WU25PD ...................................T16
VDS402A03300 WU25PD ...................................T16
VDS402A03400 WU25PD ...................................T16
VDS402A03455 WU25PD ...................................T16
Catalogue No. Page(s) Catalogue No. Page(s) Catalogue No. Page(s)
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 136 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRANDO b 28 20153 09PM
Z137
widia.com
Index by Catalogue Number
Catalogue No. Page(s)
VDS402A03500 WU25PD ...................................T16
VDS402A03571 WU25PD ...................................T16
VDS402A03600 WU25PD ...................................T16
VDS402A03658 WU25PD ...................................T16
VDS402A03700 WU25PD ...................................T16
VDS402A03734 WU25PD ...................................T16
VDS402A03800 WU25PD ...................................T16
VDS402A03900 WU25PD ...................................T16
VDS402A03970 WU25PD ...................................T16
VDS402A04000 WU25PD ...................................T16
VDS402A04039 WU25PD ...................................T16
VDS402A04090 WU25PD ...................................T16
VDS402A04100 WU25PD ...................................T16
VDS402A04200 WU25PD ...................................T16
VDS402A04217 WU25PD ...................................T16
VDS402A04300 WU25PD ...................................T16
VDS402A04366 WU25PD ...................................T17
VDS402A04400 WU25PD ...................................T17
VDS402A04500 WU25PD ...................................T17
VDS402A04600 WU25PD ...................................T17
VDS402A04623 WU25PD ...................................T17
VDS402A04700 WU25PD ...................................T17
VDS402A04763 WU25PD ...................................T17
VDS402A04800 WU25PD ...................................T17
VDS402A04852 WU25PD ...................................T17
VDS402A04900 WU25PD ...................................T17
VDS402A05000 WU25PD ...................................T17
VDS402A05100 WU25PD ...................................T17
VDS402A05106 WU25PD ...................................T17
VDS402A05159 WU25PD ...................................T17
VDS402A05200 WU25PD ...................................T17
VDS402A05300 WU25PD ...................................T17
VDS402A05400 WU25PD ...................................T17
VDS402A05410 WU25PD ...................................T17
VDS402A05500 WU25PD ...................................T17
VDS402A05558 WU25PD ...................................T17
VDS402A05600 WU25PD ...................................T17
VDS402A05616 WU25PD ...................................T17
VDS402A05700 WU25PD ...................................T17
VDS402A05800 WU25PD ...................................T17
VDS402A05900 WU25PD ...................................T17
VDS402A05954 WU25PD ...................................T17
VDS402A06000 WU25PD ...................................T17
VDS402A06100 WU25PD ...................................T17
VDS402A06200 WU25PD ...................................T17
VDS402A06300 WU25PD ...................................T17
VDS402A06350 WU25PD ...................................T17
VDS402A06400 WU25PD ...................................T17
VDS402A06500 WU25PD ...................................T17
VDS402A06528 WU25PD ...................................T17
VDS402A06600 WU25PD ...................................T17
VDS402A06630 WU25PD ...................................T17
VDS402A06700 WU25PD ...................................T17
VDS402A06746 WU25PD ...................................T17
VDS402A06800 WU25PD ...................................T17
VDS402A06900 WU25PD ...................................T17
VDS402A07000 WU25PD ...................................T18
VDS402A07100 WU25PD ...................................T18
VDS402A07145 WU25PD ...................................T18
VDS402A07200 WU25PD ...................................T18
VDS402A07300 WU25PD ...................................T18
VDS402A07400 WU25PD ...................................T18
VDS402A07500 WU25PD ...................................T18
VDS402A07541 WU25PD ...................................T18
VDS402A07600 WU25PD ...................................T18
VDS402A07700 WU25PD ...................................T18
VDS402A07800 WU25PD ...................................T18
VDS402A07900 WU25PD ...................................T18
VDS402A07938 WU25PD ...................................T18
VDS402A08000 WU25PD ...................................T18
VDS402A08100 WU25PD ...................................T18
VDS402A08200 WU25PD ...................................T18
VDS402A08300 WU25PD ...................................T18
VDS402A08334 WU25PD ...................................T18
VDS402A08400 WU25PD ...................................T18
VDS402A08433 WU25PD ...................................T18
VDS402A08500 WU25PD ...................................T18
VDS402A08600 WU25PD ...................................T18
VDS402A08700 WU25PD ...................................T18
VDS402A08733 WU25PD ...................................T18
VDS402A08800 WU25PD ...................................T18
VDS402A08900 WU25PD ...................................T18
VDS402A09000 WU25PD ...................................T18
VDS402A09100 WU25PD ...................................T18
VDS402A09129 WU25PD ...................................T18
VDS402A09200 WU25PD ...................................T18
VDS402A09300 WU25PD ...................................T18
VDS402A09347 WU25PD ...................................T18
VDS402A09400 WU25PD ...................................T18
VDS402A09500 WU25PD ...................................T18
VDS402A09525 WU25PD ...................................T18
VDS402A09600 WU25PD ...................................T18
VDS402A09700 WU25PD ...................................T18
VDS402A09800 WU25PD ...................................T18
VDS402A09900 WU25PD ...................................T18
VDS402A09921 WU25PD ...................................T18
VDS402A10000 WU25PD ...................................T19
VDS402A10100 WU25PD ...................................T19
VDS402A10200 WU25PD ...................................T19
VDS402A10300 WU25PD ...................................T19
VDS402A10320 WU25PD ...................................T19
VDS402A10400 WU25PD ...................................T19
VDS402A10500 WU25PD ...................................T19
VDS402A10600 WU25PD ...................................T19
VDS402A10700 WU25PD ...................................T19
VDS402A10716 WU25PD ...................................T19
VDS402A10800 WU25PD ...................................T19
VDS402A10900 WU25PD ...................................T19
VDS402A11000 WU25PD ...................................T19
VDS402A11100 WU25PD ...................................T19
VDS402A11113 WU25PD ...................................T19
VDS402A11200 WU25PD ...................................T19
VDS402A11300 WU25PD ...................................T19
VDS402A11400 WU25PD ...................................T19
VDS402A11500 WU25PD ...................................T19
VDS402A11509 WU25PD ...................................T19
VDS402A11600 WU25PD ...................................T19
VDS402A11700 WU25PD ...................................T19
VDS402A11800 WU25PD ...................................T19
VDS402A11900 WU25PD ...................................T19
VDS402A11908 WU25PD ...................................T19
VDS402A12000 WU25PD ...................................T19
VDS402A12100 WU25PD ...................................T19
VDS402A12200 WU25PD ...................................T19
VDS402A12300 WU25PD ...................................T19
VDS402A12304 WU25PD ...................................T19
VDS402A12400 WU25PD ...................................T19
VDS402A12500 WU25PD ...................................T19
VDS402A12600 WU25PD ...................................T19
VDS402A12700 WU25PD ...................................T19
VDS402A12800 WU25PD ...................................T19
VDS402A12900 WU25PD ...................................T19
VDS402A13000 WU25PD ...................................T19
VDS402A13096 WU25PD ...................................T19
VDS402A13100 WU25PD ...................................T19
VDS402A13200 WU25PD ...................................T19
VDS402A13300 WU25PD ...................................T20
VDS402A13400 WU25PD ...................................T20
VDS402A13500 WU25PD ...................................T20
VDS402A13600 WU25PD ...................................T20
VDS402A13700 WU25PD ...................................T20
VDS402A13800 WU25PD ...................................T20
VDS402A13891 WU25PD ...................................T20
VDS402A13900 WU25PD ...................................T20
VDS402A14000 WU25PD ...................................T20
VDS402A14100 WU25PD ...................................T20
VDS402A14200 WU25PD ...................................T20
VDS402A14288 WU25PD ...................................T20
VDS402A14300 WU25PD ...................................T20
VDS402A14400 WU25PD ...................................T20
VDS402A14500 WU25PD ...................................T20
VDS402A14600 WU25PD ...................................T20
VDS402A14684 WU25PD ...................................T20
VDS402A14700 WU25PD ...................................T20
VDS402A14800 WU25PD ...................................T20
VDS402A14900 WU25PD ...................................T20
VDS402A15000 WU25PD ...................................T20
VDS402A15083 WU25PD ...................................T20
VDS402A15100 WU25PD ...................................T20
VDS402A15200 WU25PD ...................................T20
VDS402A15300 WU25PD ...................................T20
VDS402A15400 WU25PD ...................................T20
VDS402A15479 WU25PD ...................................T20
VDS402A15500 WU25PD ...................................T20
VDS402A15600 WU25PD ...................................T20
VDS402A15700 WU25PD ...................................T20
VDS402A15800 WU25PD ...................................T20
VDS402A15875 WU25PD ...................................T20
VDS402A15900 WU25PD ...................................T20
VDS402A16000 WU25PD ...................................T20
VDS402A16100 WU25PD ...................................T20
VDS402A16200 WU25PD ...................................T20
VDS402A16271 WU25PD ...................................T20
VDS402A16300 WU25PD ...................................T20
VDS402A16400 WU25PD ...................................T20
VDS402A16500 WU25PD ...................................T20
VDS402A16600 WU25PD ...................................T21
VDS402A16670 WU25PD ...................................T21
VDS402A16700 WU25PD ...................................T21
VDS402A16800 WU25PD ...................................T21
VDS402A16900 WU25PD ...................................T21
VDS402A17000 WU25PD ...................................T21
VDS402A17100 WU25PD ...................................T21
VDS402A17200 WU25PD ...................................T21
VDS402A17300 WU25PD ...................................T21
VDS402A17400 WU25PD ...................................T21
VDS402A17463 WU25PD ...................................T21
VDS402A17500 WU25PD ...................................T21
VDS402A17600 WU25PD ...................................T21
VDS402A17700 WU25PD ...................................T21
VDS402A17800 WU25PD ...................................T21
VDS402A17859 WU25PD ...................................T21
VDS402A17900 WU25PD ...................................T21
VDS402A18000 WU25PD ...................................T21
VDS402A18100 WU25PD ...................................T21
VDS402A18200 WU25PD ...................................T21
VDS402A18258 WU25PD ...................................T21
VDS402A18300 WU25PD ...................................T21
VDS402A18400 WU25PD ...................................T21
VDS402A18500 WU25PD ...................................T21
VDS402A18600 WU25PD ...................................T21
VDS402A18654 WU25PD ...................................T21
VDS402A18700 WU25PD ...................................T21
VDS402A18800 WU25PD ...................................T21
VDS402A18900 WU25PD ...................................T21
VDS402A19000 WU25PD ...................................T21
VDS402A19050 WU25PD ...................................T21
VDS402A19100 WU25PD ...................................T21
VDS402A19200 WU25PD ...................................T21
VDS402A19300 WU25PD ...................................T21
VDS402A19400 WU25PD ...................................T21
VDS402A19500 WU25PD ...................................T21
VDS402A19600 WU25PD ...................................T21
VDS402A19700 WU25PD ...................................T21
VDS402A19800 WU25PD ...................................T21
VDS402A19900 WU25PD ...................................T21
VDS402A20000 WU25PD ...................................T21
VDS402F03000 WU25PD ...................................T34
VDS402F03100 WU25PD ...................................T34
VDS402F03200 WU25PD ...................................T34
VDS402F03300 WU25PD ...................................T34
VDS402F03400 WU25PD ...................................T34
VDS402F03500 WU25PD ...................................T34
VDS402F03600 WU25PD ...................................T34
VDS402F03700 WU25PD ...................................T34
VDS402F03800 WU25PD ...................................T34
VDS402F03900 WU25PD ...................................T34
VDS402F04000 WU25PD ...................................T34
VDS402F04100 WU25PD ...................................T34
VDS402F04200 WU25PD ...................................T34
VDS402F04300 WU25PD ...................................T34
VDS402F04400 WU25PD ...................................T34
VDS402F04500 WU25PD ...................................T34
VDS402F04600 WU25PD ...................................T34
VDS402F04700 WU25PD ...................................T34
VDS402F04800 WU25PD ...................................T34
VDS402F04900 WU25PD ...................................T34
VDS402F05000 WU25PD ...................................T34
VDS402F05100 WU25PD ...................................T34
VDS402F05200 WU25PD ...................................T34
VDS402F05300 WU25PD ...................................T34
VDS402F05400 WU25PD ...................................T35
VDS402F05500 WU25PD ...................................T35
VDS402F05600 WU25PD ...................................T35
VDS402F05700 WU25PD ...................................T35
VDS402F05800 WU25PD ...................................T35
VDS402F05900 WU25PD ...................................T35
VDS402F06000 WU25PD ...................................T35
VDS402F06100 WU25PD ...................................T35
VDS402F06200 WU25PD ...................................T35
VDS402F06300 WU25PD ...................................T35
VDS402F06400 WU25PD ...................................T35
VDS402F06500 WU25PD ...................................T35
VDS402F06600 WU25PD ...................................T35
VDS402F06700 WU25PD ...................................T35
VDS402F06800 WU25PD ...................................T35
VDS402F06900 WU25PD ...................................T35
VDS402F07000 WU25PD ...................................T35
VDS402F07100 WU25PD ...................................T35
VDS402F07200 WU25PD ...................................T35
VDS402F07300 WU25PD ...................................T35
VDS402F07400 WU25PD ...................................T35
VDS402F07500 WU25PD ...................................T35
VDS402F07600 WU25PD ...................................T35
VDS402F07700 WU25PD ...................................T35
VDS402F07800 WU25PD ...................................T35
VDS402F07900 WU25PD ...................................T35
VDS402F08000 WU25PD ...................................T35
VDS402F08100 WU25PD ...................................T35
VDS402F08200 WU25PD ...................................T35
VDS402F08300 WU25PD ...................................T35
VDS402F08400 WU25PD ...................................T35
Catalogue No. Page(s) Catalogue No. Page(s) Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 137 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRAND O b 28 2015 3 09 PM
Z138 widia.com
Index by Catalogue Number
Index
Catalogue No. Page(s)
VDS402F08500 WU25PD ...................................T35
VDS402F08600 WU25PD ...................................T35
VDS402F08700 WU25PD ...................................T35
VDS402F08800 WU25PD ...................................T35
VDS402F08900 WU25PD ...................................T35
VDS402F09000 WU25PD ...................................T35
VDS402F09100 WU25PD ...................................T35
VDS402F09200 WU25PD ...................................T35
VDS402F09300 WU25PD ...................................T35
VDS402F09400 WU25PD ...................................T36
VDS402F09500 WU25PD ...................................T36
VDS402F09600 WU25PD ...................................T36
VDS402F09700 WU25PD ...................................T36
VDS402F09800 WU25PD ...................................T36
VDS402F09900 WU25PD ...................................T36
VDS402F10000 WU25PD ...................................T36
VDS402F10100 WU25PD ...................................T36
VDS402F10200 WU25PD ...................................T36
VDS402F10300 WU25PD ...................................T36
VDS402F10400 WU25PD ...................................T36
VDS402F10500 WU25PD ...................................T36
VDS402F10600 WU25PD ...................................T36
VDS402F10700 WU25PD ...................................T36
VDS402F10800 WU25PD ...................................T36
VDS402F10900 WU25PD ...................................T36
VDS402F11000 WU25PD ...................................T36
VDS402F11100 WU25PD ...................................T36
VDS402F11200 WU25PD ...................................T36
VDS402F11300 WU25PD ...................................T36
VDS402F11400 WU25PD ...................................T36
VDS402F11500 WU25PD ...................................T36
VDS402F11600 WU25PD ...................................T36
VDS402F11700 WU25PD ...................................T36
VDS402F11800 WU25PD ...................................T36
VDS402F11900 WU25PD ...................................T36
VDS402F12000 WU25PD ...................................T36
VDS402F12100 WU25PD ...................................T36
VDS402F12200 WU25PD ...................................T36
VDS402F12300 WU25PD ...................................T36
VDS402F12400 WU25PD ...................................T36
VDS402F12500 WU25PD ...................................T36
VDS402F12600 WU25PD ...................................T36
VDS402F12700 WU25PD ...................................T36
VDS402F12800 WU25PD ...................................T36
VDS402F12900 WU25PD ...................................T36
VDS402F13000 WU25PD ...................................T36
VDS402F13100 WU25PD ...................................T36
VDS402F13200 WU25PD ...................................T36
VDS402F13300 WU25PD ...................................T36
VDS402F13400 WU25PD ...................................T37
VDS402F13500 WU25PD ...................................T37
VDS402F13600 WU25PD ...................................T37
VDS402F13700 WU25PD ...................................T37
VDS402F13800 WU25PD ...................................T37
VDS402F13900 WU25PD ...................................T37
VDS402F14000 WU25PD ...................................T37
VDS402F14100 WU25PD ...................................T37
VDS402F14200 WU25PD ...................................T37
VDS402F14300 WU25PD ...................................T37
VDS402F14400 WU25PD ...................................T37
VDS402F14500 WU25PD ...................................T37
VDS402F14600 WU25PD ...................................T37
VDS402F14700 WU25PD ...................................T37
VDS402F14800 WU25PD ...................................T37
VDS402F14900 WU25PD ...................................T37
VDS402F15000 WU25PD ...................................T37
VDS402F15100 WU25PD ...................................T37
VDS402F15200 WU25PD ...................................T37
VDS402F15300 WU25PD ...................................T37
VDS402F15400 WU25PD ...................................T37
VDS402F15500 WU25PD ...................................T37
VDS402F15600 WU25PD ...................................T37
VDS402F15700 WU25PD ...................................T37
VDS402F15800 WU25PD ...................................T37
VDS402F15900 WU25PD ...................................T37
VDS402F16000 WU25PD ...................................T37
VDS402F16100 WU25PD ...................................T37
VDS402F16200 WU25PD ...................................T37
VDS402F16300 WU25PD ...................................T37
VDS402F16400 WU25PD ...................................T37
VDS402F16500 WU25PD ...................................T37
VDS402F16600 WU25PD ...................................T37
VDS402F16700 WU25PD ...................................T37
VDS402F16800 WU25PD ...................................T37
VDS402F16900 WU25PD ...................................T37
VDS402F17000 WU25PD ...................................T37
VDS402F17100 WU25PD ...................................T37
VDS402F17200 WU25PD ...................................T37
VDS402F17300 WU25PD ...................................T37
VDS402F17400 WU25PD ...................................T38
VDS402F17500 WU25PD ...................................T38
VDS402F17600 WU25PD ...................................T38
VDS402F17700 WU25PD ...................................T38
VDS402F17800 WU25PD ...................................T38
VDS402F17900 WU25PD ...................................T38
VDS402F18000 WU25PD ...................................T38
VDS402F18100 WU25PD ...................................T38
VDS402F18200 WU25PD ...................................T38
VDS402F18300 WU25PD ...................................T38
VDS402F18400 WU25PD ...................................T38
VDS402F18500 WU25PD ...................................T38
VDS402F18600 WU25PD ...................................T38
VDS402F18700 WU25PD ...................................T38
VDS402F18800 WU25PD ...................................T38
VDS402F18900 WU25PD ...................................T38
VDS402F19000 WU25PD ...................................T38
VDS402F19100 WU25PD ...................................T38
VDS402F19200 WU25PD ...................................T38
VDS402F19300 WU25PD ...................................T38
VDS402F19400 WU25PD ...................................T38
VDS402F19500 WU25PD ...................................T38
VDS402F19600 WU25PD ...................................T38
VDS402F19700 WU25PD ...................................T38
VDS402F19800 WU25PD ...................................T38
VDS402F19900 WU25PD ...................................T38
VDS402F20000 WU25PD ...................................T38
VDS403A01000 WU25PD ...................................T22
VDS403A01016 WU25PD ...................................T22
VDS403A01067 WU25PD ...................................T22
VDS403A01100 WU25PD ...................................T22
VDS403A01181 WU25PD ...................................T22
VDS403A01191 WU25PD ...................................T22
VDS403A01200 WU25PD ...................................T22
VDS403A01300 WU25PD ...................................T22
VDS403A01321 WU25PD ...................................T22
VDS403A01397 WU25PD ...................................T22
VDS403A01400 WU25PD ...................................T22
VDS403A01500 WU25PD ...................................T22
VDS403A01600 WU25PD ...................................T22
VDS403A01700 WU25PD ...................................T22
VDS403A01800 WU25PD ...................................T22
VDS403A01900 WU25PD ...................................T22
VDS403A01984 WU25PD ...................................T22
VDS403A02000 WU25PD ...................................T22
VDS403A02100 WU25PD ...................................T22
VDS403A02200 WU25PD ...................................T22
VDS403A02300 WU25PD ...................................T22
VDS403A02383 WU25PD ...................................T22
VDS403A02400 WU25PD ...................................T22
VDS403A02439 WU25PD ...................................T22
VDS403A02489 WU25PD ...................................T22
VDS403A02500 WU25PD ...................................T22
VDS403A02578 WU25PD ...................................T22
VDS403A02600 WU25PD ...................................T22
VDS403A02642 WU25PD ...................................T23
VDS403A02700 WU25PD ...................................T23
VDS403A02705 WU25PD ...................................T23
VDS403A02779 WU25PD ...................................T23
VDS403A02800 WU25PD ...................................T23
VDS403A02820 WU25PD ...................................T23
VDS403A02870 WU25PD ...................................T23
VDS403A02900 WU25PD ...................................T23
VDS403A02947 WU25PD ...................................T23
VDS403A03000 WU25PD ...................................T23
VDS403A03048 WU25PD ...................................T23
VDS403A03100 WU25PD ...................................T23
VDS403A03175 WU25PD ...................................T23
VDS403A03200 WU25PD ...................................T23
VDS403A03264 WU25PD ...................................T23
VDS403A03300 WU25PD ...................................T23
VDS403A03400 WU25PD ...................................T23
VDS403A03455 WU25PD ...................................T23
VDS403A03500 WU25PD ...................................T23
VDS403A03571 WU25PD ...................................T23
VDS403A03600 WU25PD ...................................T23
VDS403A03658 WU25PD ...................................T23
VDS403A03700 WU25PD ...................................T23
VDS403A03734 WU25PD ...................................T23
VDS403A03800 WU25PD ...................................T23
VDS403A03900 WU25PD ...................................T23
VDS403A03970 WU25PD ...................................T23
VDS403A04000 WU25PD ...................................T23
VDS403A04039 WU25PD ...................................T23
VDS403A04090 WU25PD ...................................T23
VDS403A04100 WU25PD ...................................T23
VDS403A04200 WU25PD ...................................T23
VDS403A04217 WU25PD ...................................T23
VDS403A04300 WU25PD ...................................T23
VDS403A04366 WU25PD ...................................T23
VDS403A04400 WU25PD ...................................T23
VDS403A04500 WU25PD ...................................T23
VDS403A04600 WU25PD ...................................T23
VDS403A04623 WU25PD ...................................T23
VDS403A04700 WU25PD ...................................T23
VDS403A04763 WU25PD ...................................T24
VDS403A04800 WU25PD ...................................T24
VDS403A04852 WU25PD ...................................T24
VDS403A04900 WU25PD ...................................T24
VDS403A05000 WU25PD ...................................T24
VDS403A05100 WU25PD ...................................T24
VDS403A05106 WU25PD ...................................T24
VDS403A05159 WU25PD ...................................T24
VDS403A05200 WU25PD ...................................T24
VDS403A05300 WU25PD ...................................T24
VDS403A05400 WU25PD ...................................T24
VDS403A05410 WU25PD ...................................T24
VDS403A05500 WU25PD ...................................T24
VDS403A05558 WU25PD ...................................T24
VDS403A05600 WU25PD ...................................T24
VDS403A05616 WU25PD ...................................T24
VDS403A05700 WU25PD ...................................T24
VDS403A05800 WU25PD ...................................T24
VDS403A05900 WU25PD ...................................T24
VDS403A05954 WU25PD ...................................T24
VDS403A06000 WU25PD ...................................T24
VDS403A06100 WU25PD ...................................T24
VDS403A06200 WU25PD ...................................T24
VDS403A06300 WU25PD ...................................T24
VDS403A06350 WU25PD ...................................T24
VDS403A06400 WU25PD ...................................T24
VDS403A06500 WU25PD ...................................T24
VDS403A06528 WU25PD ...................................T24
VDS403A06600 WU25PD ...................................T24
VDS403A06630 WU25PD ...................................T24
VDS403A06700 WU25PD ...................................T24
VDS403A06746 WU25PD ...................................T24
VDS403A06800 WU25PD ...................................T24
VDS403A06900 WU25PD ...................................T24
VDS403A07000 WU25PD ...................................T24
VDS403A07100 WU25PD ...................................T24
VDS403A07145 WU25PD ...................................T24
VDS403A07200 WU25PD ...................................T24
VDS403A07300 WU25PD ...................................T24
VDS403A07400 WU25PD ...................................T24
VDS403A07500 WU25PD ...................................T25
VDS403A07541 WU25PD ...................................T25
VDS403A07600 WU25PD ...................................T25
VDS403A07700 WU25PD ...................................T25
VDS403A07800 WU25PD ...................................T25
VDS403A07900 WU25PD ...................................T25
VDS403A07938 WU25PD ...................................T25
VDS403A08000 WU25PD ...................................T25
VDS403A08100 WU25PD ...................................T25
VDS403A08200 WU25PD ...................................T25
VDS403A08300 WU25PD ...................................T25
VDS403A08334 WU25PD ...................................T25
VDS403A08400 WU25PD ...................................T25
VDS403A08433 WU25PD ...................................T25
VDS403A08500 WU25PD ...................................T25
VDS403A08600 WU25PD ...................................T25
VDS403A08700 WU25PD ...................................T25
VDS403A08733 WU25PD ...................................T25
VDS403A08800 WU25PD ...................................T25
VDS403A08900 WU25PD ...................................T25
VDS403A09000 WU25PD ...................................T25
VDS403A09100 WU25PD ...................................T25
VDS403A09129 WU25PD ...................................T25
VDS403A09200 WU25PD ...................................T25
VDS403A09300 WU25PD ...................................T25
VDS403A09347 WU25PD ...................................T25
VDS403A09400 WU25PD ...................................T25
VDS403A09500 WU25PD ...................................T25
VDS403A09525 WU25PD ...................................T25
VDS403A09600 WU25PD ...................................T25
VDS403A09700 WU25PD ...................................T25
VDS403A09800 WU25PD ...................................T25
VDS403A09900 WU25PD ...................................T25
VDS403A09921 WU25PD ...................................T25
VDS403A10000 WU25PD ...................................T25
VDS403A10100 WU25PD ...................................T25
VDS403A10200 WU25PD ...................................T25
VDS403A10300 WU25PD ...................................T25
VDS403A10320 WU25PD ...................................T25
VDS403A10400 WU25PD ...................................T25
VDS403A10500 WU25PD ...................................T26
VDS403A10600 WU25PD ...................................T26
VDS403A10700 WU25PD ...................................T26
VDS403A10716 WU25PD ...................................T26
VDS403A10800 WU25PD ...................................T26
VDS403A10900 WU25PD ...................................T26
VDS403A11000 WU25PD ...................................T26
VDS403A11100 WU25PD ...................................T26
Catalogue No. Page(s) Catalogue No. Page(s) Catalogue No. Page(s)
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 138 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRANDO b 28 20153 09PM
Z139
widia.com
Index by Catalogue Number
Catalogue No. Page(s)
VDS403A11113 WU25PD ...................................T26
VDS403A11200 WU25PD ...................................T26
VDS403A11300 WU25PD ...................................T26
VDS403A11400 WU25PD ...................................T26
VDS403A11500 WU25PD ...................................T26
VDS403A11509 WU25PD ...................................T26
VDS403A11600 WU25PD ...................................T26
VDS403A11700 WU25PD ...................................T26
VDS403A11800 WU25PD ...................................T26
VDS403A11900 WU25PD ...................................T26
VDS403A11908 WU25PD ...................................T26
VDS403A12000 WU25PD ...................................T26
VDS403A12100 WU25PD ...................................T26
VDS403A12200 WU25PD ...................................T26
VDS403A12300 WU25PD ...................................T26
VDS403A12304 WU25PD ...................................T26
VDS403A12400 WU25PD ...................................T26
VDS403A12500 WU25PD ...................................T26
VDS403A12600 WU25PD ...................................T26
VDS403A12700 WU25PD ...................................T26
VDS403A12800 WU25PD ...................................T26
VDS403A12900 WU25PD ...................................T26
VDS403A13000 WU25PD ...................................T26
VDS403A13096 WU25PD ...................................T26
VDS403A13100 WU25PD ...................................T26
VDS403A13200 WU25PD ...................................T26
VDS403A13300 WU25PD ...................................T26
VDS403A13400 WU25PD ...................................T26
VDS403A13500 WU25PD ...................................T26
VDS403A13600 WU25PD ...................................T26
VDS403A13700 WU25PD ...................................T26
VDS403A13800 WU25PD ...................................T26
VDS403A13891 WU25PD ...................................T27
VDS403A13900 WU25PD ...................................T27
VDS403A14000 WU25PD ...................................T27
VDS403A14100 WU25PD ...................................T27
VDS403A14200 WU25PD ...................................T27
VDS403A14288 WU25PD ...................................T27
VDS403A14300 WU25PD ...................................T27
VDS403A14400 WU25PD ...................................T27
VDS403A14500 WU25PD ...................................T27
VDS403A14600 WU25PD ...................................T27
VDS403A14684 WU25PD ...................................T27
VDS403A14700 WU25PD ...................................T27
VDS403A14800 WU25PD ...................................T27
VDS403A14900 WU25PD ...................................T27
VDS403A15000 WU25PD ...................................T27
VDS403A15083 WU25PD ...................................T27
VDS403A15100 WU25PD ...................................T27
VDS403A15200 WU25PD ...................................T27
VDS403A15300 WU25PD ...................................T27
VDS403A15400 WU25PD ...................................T27
VDS403A15479 WU25PD ...................................T27
VDS403A15500 WU25PD ...................................T27
VDS403A15600 WU25PD ...................................T27
VDS403A15700 WU25PD ...................................T27
VDS403A15800 WU25PD ...................................T27
VDS403A15875 WU25PD ...................................T27
VDS403A15900 WU25PD ...................................T27
VDS403A16000 WU25PD ...................................T27
VDS403A16100 WU25PD ...................................T27
VDS403A16200 WU25PD ...................................T27
VDS403A16271 WU25PD ...................................T27
VDS403A16300 WU25PD ...................................T27
VDS403A16400 WU25PD ...................................T27
VDS403A16500 WU25PD ...................................T27
VDS403A16600 WU25PD ...................................T27
VDS403A16670 WU25PD ...................................T27
VDS403A16700 WU25PD ...................................T27
VDS403A16800 WU25PD ...................................T27
VDS403A16900 WU25PD ...................................T27
VDS403A17000 WU25PD ...................................T27
VDS403A17100 WU25PD ...................................T28
VDS403A17200 WU25PD ...................................T28
VDS403A17300 WU25PD ...................................T28
VDS403A17400 WU25PD ...................................T28
VDS403A17463 WU25PD ...................................T28
VDS403A17500 WU25PD ...................................T28
VDS403A17600 WU25PD ...................................T28
VDS403A17700 WU25PD ...................................T28
VDS403A17800 WU25PD ...................................T28
VDS403A17859 WU25PD ...................................T28
VDS403A17900 WU25PD ...................................T28
VDS403A18000 WU25PD ...................................T28
VDS403A18100 WU25PD ...................................T28
VDS403A18200 WU25PD ...................................T28
VDS403A18258 WU25PD ...................................T28
VDS403A18300 WU25PD ...................................T28
VDS403A18400 WU25PD ...................................T28
VDS403A18500 WU25PD ...................................T28
VDS403A18600 WU25PD ...................................T28
VDS403A18654 WU25PD ...................................T28
VDS403A18700 WU25PD ...................................T28
VDS403A18800 WU25PD ...................................T28
VDS403A18900 WU25PD ...................................T28
VDS403A19000 WU25PD ...................................T28
VDS403A19050 WU25PD ...................................T28
VDS403A19100 WU25PD ...................................T28
VDS403A19200 WU25PD ...................................T28
VDS403A19300 WU25PD ...................................T28
VDS403A19400 WU25PD ...................................T28
VDS403A19500 WU25PD ...................................T28
VDS403A19600 WU25PD ...................................T28
VDS403A19700 WU25PD ...................................T28
VDS403A19800 WU25PD ...................................T28
VDS403A19900 WU25PD ...................................T28
VDS403A20000 WU25PD ...................................T28
VDS403F03000 WU25PD ...................................T39
VDS403F03100 WU25PD ...................................T39
VDS403F03200 WU25PD ...................................T39
VDS403F03300 WU25PD ...................................T39
VDS403F03400 WU25PD ...................................T39
VDS403F03500 WU25PD ...................................T39
VDS403F03600 WU25PD ...................................T39
VDS403F03700 WU25PD ...................................T39
VDS403F03800 WU25PD ...................................T39
VDS403F03900 WU25PD ...................................T39
VDS403F04000 WU25PD ...................................T39
VDS403F04100 WU25PD ...................................T39
VDS403F04200 WU25PD ...................................T39
VDS403F04300 WU25PD ...................................T39
VDS403F04400 WU25PD ...................................T39
VDS403F04500 WU25PD ...................................T39
VDS403F04600 WU25PD ...................................T39
VDS403F04700 WU25PD ...................................T39
VDS403F04800 WU25PD ...................................T39
VDS403F04900 WU25PD ...................................T39
VDS403F05000 WU25PD ...................................T39
VDS403F05100 WU25PD ...................................T39
VDS403F05200 WU25PD ...................................T39
VDS403F05300 WU25PD ...................................T39
VDS403F05400 WU25PD ...................................T40
VDS403F05500 WU25PD ...................................T40
VDS403F05600 WU25PD ...................................T40
VDS403F05700 WU25PD ...................................T40
VDS403F05800 WU25PD ...................................T40
VDS403F05900 WU25PD ...................................T40
VDS403F06000 WU25PD ...................................T40
VDS403F06100 WU25PD ...................................T40
VDS403F06200 WU25PD ...................................T40
VDS403F06300 WU25PD ...................................T40
VDS403F06400 WU25PD ...................................T40
VDS403F06500 WU25PD ...................................T40
VDS403F06600 WU25PD ...................................T40
VDS403F06700 WU25PD ...................................T40
VDS403F06800 WU25PD ...................................T40
VDS403F06900 WU25PD ...................................T40
VDS403F07000 WU25PD ...................................T40
VDS403F07100 WU25PD ...................................T40
VDS403F07200 WU25PD ...................................T40
VDS403F07300 WU25PD ...................................T40
VDS403F07400 WU25PD ...................................T40
VDS403F07500 WU25PD ...................................T40
VDS403F07600 WU25PD ...................................T40
VDS403F07700 WU25PD ...................................T40
VDS403F07800 WU25PD ...................................T40
VDS403F07900 WU25PD ...................................T40
VDS403F08000 WU25PD ...................................T40
VDS403F08100 WU25PD ...................................T40
VDS403F08200 WU25PD ...................................T40
VDS403F08300 WU25PD ...................................T40
VDS403F08400 WU25PD ...................................T40
VDS403F08500 WU25PD ...................................T40
VDS403F08600 WU25PD ...................................T40
VDS403F08700 WU25PD ...................................T40
VDS403F08800 WU25PD ...................................T40
VDS403F08900 WU25PD ...................................T40
VDS403F09000 WU25PD ...................................T40
VDS403F09100 WU25PD ...................................T40
VDS403F09200 WU25PD ...................................T40
VDS403F09300 WU25PD ...................................T40
VDS403F09400 WU25PD ...................................T41
VDS403F09500 WU25PD ...................................T41
VDS403F09600 WU25PD ...................................T41
VDS403F09700 WU25PD ...................................T41
VDS403F09800 WU25PD ...................................T41
VDS403F09900 WU25PD ...................................T41
VDS403F10000 WU25PD ...................................T41
VDS403F10100 WU25PD ...................................T41
VDS403F10200 WU25PD ...................................T41
VDS403F10300 WU25PD ...................................T41
VDS403F10400 WU25PD ...................................T41
VDS403F10500 WU25PD ...................................T41
VDS403F10600 WU25PD ...................................T41
VDS403F10700 WU25PD ...................................T41
VDS403F10800 WU25PD ...................................T41
VDS403F10900 WU25PD ...................................T41
VDS403F11000 WU25PD ...................................T41
VDS403F11100 WU25PD ...................................T41
VDS403F11200 WU25PD ...................................T41
VDS403F11300 WU25PD ...................................T41
VDS403F11400 WU25PD ...................................T41
VDS403F11500 WU25PD ...................................T41
VDS403F11600 WU25PD ...................................T41
VDS403F11700 WU25PD ...................................T41
VDS403F11800 WU25PD ...................................T41
VDS403F11900 WU25PD ...................................T41
VDS403F12000 WU25PD ...................................T41
VDS403F12100 WU25PD ...................................T41
VDS403F12200 WU25PD ...................................T41
VDS403F12300 WU25PD ...................................T41
VDS403F12400 WU25PD ...................................T41
VDS403F12500 WU25PD ...................................T41
VDS403F12600 WU25PD ...................................T41
VDS403F12700 WU25PD ...................................T41
VDS403F12800 WU25PD ...................................T41
VDS403F12900 WU25PD ...................................T41
VDS403F13000 WU25PD ...................................T41
VDS403F13100 WU25PD ...................................T41
VDS403F13200 WU25PD ...................................T41
VDS403F13300 WU25PD ...................................T41
VDS403F13400 WU25PD ...................................T42
VDS403F13500 WU25PD ...................................T42
VDS403F13600 WU25PD ...................................T42
VDS403F13700 WU25PD ...................................T42
VDS403F13800 WU25PD ...................................T42
VDS403F13900 WU25PD ...................................T42
VDS403F14000 WU25PD ...................................T42
VDS403F14100 WU25PD ...................................T42
VDS403F14200 WU25PD ...................................T42
VDS403F14300 WU25PD ...................................T42
VDS403F14400 WU25PD ...................................T42
VDS403F14500 WU25PD ...................................T42
VDS403F14600 WU25PD ...................................T42
VDS403F14700 WU25PD ...................................T42
VDS403F14800 WU25PD ...................................T42
VDS403F14900 WU25PD ...................................T42
VDS403F15000 WU25PD ...................................T42
VDS403F15100 WU25PD ...................................T42
VDS403F15200 WU25PD ...................................T42
VDS403F15300 WU25PD ...................................T42
VDS403F15400 WU25PD ...................................T42
VDS403F15500 WU25PD ...................................T42
VDS403F15600 WU25PD ...................................T42
VDS403F15700 WU25PD ...................................T42
VDS403F15800 WU25PD ...................................T42
VDS403F15900 WU25PD ...................................T42
VDS403F16000 WU25PD ...................................T42
VDS403F16100 WU25PD ...................................T42
VDS403F16200 WU25PD ...................................T42
VDS403F16300 WU25PD ...................................T42
VDS403F16400 WU25PD ...................................T42
VDS403F16500 WU25PD ...................................T42
VDS403F16600 WU25PD ...................................T42
VDS403F16700 WU25PD ...................................T42
VDS403F16800 WU25PD ...................................T42
VDS403F16900 WU25PD ...................................T42
VDS403F17000 WU25PD ...................................T42
VDS403F17100 WU25PD ...................................T42
VDS403F17200 WU25PD ...................................T42
VDS403F17300 WU25PD ...................................T42
VDS403F17400 WU25PD ...................................T43
VDS403F17500 WU25PD ...................................T43
VDS403F17600 WU25PD ...................................T43
VDS403F17700 WU25PD ...................................T43
VDS403F17800 WU25PD ...................................T43
VDS403F17900 WU25PD ...................................T43
VDS403F18000 WU25PD ...................................T43
VDS403F18100 WU25PD ...................................T43
VDS403F18200 WU25PD ...................................T43
VDS403F18300 WU25PD ...................................T43
VDS403F18400 WU25PD ...................................T43
VDS403F18500 WU25PD ...................................T43
VDS403F18600 WU25PD ...................................T43
VDS403F18700 WU25PD ...................................T43
VDS403F18800 WU25PD ...................................T43
VDS403F18900 WU25PD ...................................T43
VDS403F19000 WU25PD ...................................T43
VDS403F19100 WU25PD ...................................T43
VDS403F19200 WU25PD ...................................T43
VDS403F19300 WU25PD ...................................T43
VDS403F19400 WU25PD ...................................T43
Catalogue No. Page(s) Catalogue No. Page(s) Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 139 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRAND O b 28 2015 3 09 PM
Z140 widia.com
Index by Catalogue Number
Index
Catalogue No. Page(s)
VDS403F19500 WU25PD ...................................T43
VDS403F19600 WU25PD ...................................T43
VDS403F19700 WU25PD ...................................T43
VDS403F19800 WU25PD ...................................T43
VDS403F19900 WU25PD ...................................T43
VDS403F20000 WU25PD ...................................T43
VNGA160404FST WDN25U .............................. B217
VNGA160404S01025MT WBH10P................... B217
VNGA160404S01025MT WBH25P................... B217
VNGA160404S01025MT WBH30P................... B217
VNGA160404T02020 CW2015 ....................... B195
VNGA160408FST WDN25U .............................. B217
VNGA160408S01025MT WBH10P................... B217
VNGA160408S01025MT WBH25P................... B217
VNGA160408S01025MT WBH30P................... B217
VNGA160408T02020 CW2015 ....................... B195
VNGA160408T02020 CW5025 ....................... B195
VNGA160412T02020 CW2015 ....................... B195
VNGA220408T02020 CW2015 ....................... B195
VNGG160401FS WS10PT .................................. B95
VNGG160401FS WU10HT .................................. B95
VNGG160402FS WS10PT .................................. B95
VNGG160402FS WU10HT .................................. B95
VNGG160404FS WS10PT .................................. B95
VNGG160404FS WS25PT .................................. B95
VNGG160404FS WU10HT .................................. B95
VNGG160408FS WS10PT .................................. B95
VNGG160408FS WS25PT .................................. B95
VNGG160408FS WU10HT .................................. B95
VNGP160401 TN10U ............................... B96, B145
VNGP160401 TN15U ....................................... B145
VNGP160401 WS10PT ...................................... B96
VNGP160401 WU10HT ...................................... B96
VNGP160402 TN10U ............................... B96, B145
VNGP160402 WS10PT ...................................... B96
VNGP220404 TN10U ............................... B96, B145
VNGP220404 TN15U ....................................... B145
VNGP220404 WS10PT ...................................... B96
VNGP220408 TN10U ............................... B96, B145
VNGP220408 TN15U ....................................... B145
VNGP220408 WS10PT ...................................... B96
VNGP220408 WU10HT ...................................... B96
VNMA160408 TN20K ...................................... B145
VNMA160408 WK05CT ..................................... B96
VNMA160408 WK20CT ..................................... B96
VNMG12T304 WS10PT...................................... B96
VNMG12T304 WS25PT...................................... B96
VNMG12T308 WK20CT ..................................... B96
VNMG12T308 WS10PT...................................... B96
VNMG12T308 WS25PT...................................... B96
VNMG1604042P TN10P .................................. B146
VNMG1604042P TN10U .................................. B146
VNMG1604042P TN15M ................................. B146
VNMG1604042P TN15U .................................. B146
VNMG1604042P TN20K .................................. B146
VNMG1604042P TN20P .................................. B146
VNMG1604042P TN30M ................................. B146
VNMG1604044P TN10U .................................. B146
VNMG1604044P TN15M ................................. B146
VNMG1604044P TN20P .................................. B146
VNMG1604044P TN30M ................................. B146
VNMG160404FF WM25CT ................................. B97
VNMG160404FF WP15CT .................................. B97
VNMG160404FF WS10PT .................................. B97
VNMG160404ML WK05CT ................................ B97
VNMG160404ML WK20CT ................................ B97
VNMG160404ML WP15CT ................................ B97
VNMG160404ML WP25CT ................................ B97
VNMG160404MS WS10PT ................................ B98
VNMG160404MS WS25PT ................................ B98
VNMG160404MS WU10HT ................................ B98
VNMG160404UF WM15CT ................................ B98
VNMG160404UF WM25CT ................................ B98
VNMG160404UF WS10PT ................................. B98
VNMG1604082P TN10P .................................. B146
VNMG1604082P TN10U .................................. B146
VNMG1604082P TN15M ................................. B146
VNMG1604082P TN15U .................................. B146
VNMG1604082P TN20K .................................. B146
VNMG1604082P TN20P .................................. B146
VNMG1604084P TN10U .................................. B146
VNMG1604084P TN15M ................................. B146
VNMG1604084P TN20P .................................. B146
VNMG1604084P TN30M ................................. B146
VNMG1604086P TN10P .................................. B147
VNMG1604086P TN15M ................................. B147
VNMG1604086P TN20P .................................. B147
VNMG1604086P TN30M ................................. B147
VNMG160408FF WM25CT ................................. B97
VNMG160408FF WP15CT .................................. B97
VNMG160408FF WS10PT .................................. B97
VNMG160408ML WK05CT ................................ B97
VNMG160408ML WK20CT ................................ B97
VNMG160408ML WP15CT ................................ B97
VNMG160408ML WP25CT ................................ B97
VNMG160408MR WP15CT ................................ B97
VNMG160408MR WP25CT ................................ B97
VNMG160408MR WP35CT ................................ B97
VNMG160408MS WS10PT ................................ B98
VNMG160408MS WS25PT ................................ B98
VNMG160408MS WU10HT ................................ B98
VNMG160408RH WP15CT ................................. B98
VNMG160408RH WP25CT ................................. B98
VNMG160408RH WP35CT ................................. B98
VNMG160408UF WM15CT ................................ B98
VNMG160408UF WM25CT ................................ B98
VNMG160408UF WP15CT ................................. B98
VNMG160408UF WS10PT ................................. B98
VNMG160408UR WK20CT ................................. B99
VNMG160408UR WM15CT ................................ B99
VNMG160408UR WM25CT ................................ B99
VNMG160408UR WM35CT ................................ B99
VNMG160408UR WP15CT ................................. B99
VNMG160408UR WP25CT ................................. B99
VNMG160408UR WP35CT ................................. B99
VNMG160408UR WS25PT ................................. B99
VNMG160412UR WK20CT ................................. B99
VNMG160412UR WM15CT ................................ B99
VNMG160412UR WM25CT ................................ B99
VNMG160412UR WP15CT ................................. B99
VNMG160412UR WP25CT ................................. B99
VNMG160412UR WS10PT ................................. B99
VNMG220404MS WS10PT ................................ B98
VNMG220404MS WS25PT ................................ B98
VNMG220404MS WU10HT ................................ B98
VNMG220408MS WS10PT ................................ B98
VNMG220408MS WS25PT ................................ B98
VNMG220408MS WU10HT ................................ B98
VNMG220408RH WP15CT ................................. B98
VNMG220408RH WP25CT ................................. B98
VNMG220408RH WP35CT ................................. B98
VNMG220412RH WP15CT ................................. B98
VNMG220412RH WP25CT ................................. B98
VNMG220412RH WP35CT ................................. B98
VNMP160404 WS10PT ...................................... B99
VNMP160408 WS10PT ...................................... B99
VNMS160404FST WDN25U ............................. B218
VNMS160408FST WDN25U ............................. B218
VSM11D012Z01A16XD11L100 .................... J6, J15
VSM11D012Z01B16XD11 ............................ J5, J15
VSM11D016Z02A16XD11L100 .................... J6, J15
VSM11D016Z02A16XD11L170 .................... J7, J15
VSM11D016Z02B16XD11 ............................ J5, J15
VSM11D016Z02M08XD11 ........................... J4, J15
VSM11D018Z02A16XD11L170 .................... J7, J15
VSM11D020Z02A20XD11L110 .................... J6, J15
VSM11D020Z02A20XD11L170 .................... J7, J15
VSM11D020Z02B20XD11 ............................ J5, J15
VSM11D020Z03A20XD11L110 .................... J6, J15
VSM11D020Z03A20XD11L170 .................... J7, J15
VSM11D020Z03B20XD11 ............................ J5, J15
VSM11D020Z03M10XD11 ........................... J4, J15
VSM11D022Z03A20XD11L170 .................... J7, J15
VSM11D025Z03A25XD11L120 .................... J6, J15
VSM11D025Z03A25XD11L210 .................... J7, J15
VSM11D025Z03B25XD11 ............................ J5, J15
VSM11D025Z04A25XD11L120 .................... J6, J15
VSM11D025Z04A25XD11L210 .................... J7, J15
VSM11D025Z04B25XD11 ............................ J5, J15
VSM11D025Z04M12XD11 ........................... J4, J15
VSM11D030Z04B25XD11 ............................ J5, J15
VSM11D032Z03A32XD11L130 .................... J6, J15
VSM11D032Z03A32XD11L250 .................... J7, J15
VSM11D032Z04B32XD11 ............................ J5, J15
VSM11D032Z04M16XD11 ........................... J4, J15
VSM11D032Z05A32XD11L130 .................... J6, J15
VSM11D032Z05B32XD11 ............................ J5, J15
VSM11D040Z04S016XD11 .......................... J8, J15
VSM11D040Z06M16XD11 ........................... J4, J15
VSM11D040Z06S016XD11 .......................... J8, J15
VSM11D050Z05S022XD11 .......................... J8, J15
VSM11D050Z08S022XD11 .......................... J8, J15
VSM11D063Z06S022XD11 .......................... J8, J15
VSM11D063Z09S022XD11 .......................... J8, J15
VSM11D080Z08S027XD11 .......................... J8, J15
VSM11D100Z09S032XD11 .......................... J8, J15
VSM11D125Z011S040XD11 ........................ J8, J15
VSM17D025Z02A25XD17L110 ..........................J22
VSM17D025Z02A25XD17L170 ..........................J22
VSM17D025Z02B25XD17 ..................................J21
VSM17D025Z02M12XD17 .................................J20
VSM17D032Z02A32XD17L120 ..........................J22
VSM17D032Z02A32XD17L210 ..........................J23
VSM17D032Z02B32XD17 ..................................J21
VSM17D032Z03A32XD17L120 ..........................J22
VSM17D032Z03A32XD17L210 ..........................J23
VSM17D032Z03B32XD17 ..................................J21
VSM17D032Z03M16XD17 .................................J20
VSM17D040Z03A32XD17L130 ..........................J22
VSM17D040Z03A32XD17L250 ..........................J23
VSM17D040Z03B40XD17 ..................................J21
VSM17D040Z04A32XD17L130 ..........................J22
VSM17D040Z04A32XD17L250 ..........................J23
VSM17D040Z04B40XD17 ..................................J21
VSM17D040Z04M16XD17 .................................J20
VSM17D040Z04S16XD17 ..................................J24
VSM17D050Z04S22XD17 ..................................J24
VSM17D050Z05S22XD17 ..................................J24
VSM17D050Z06S22XD17 ..................................J24
VSM17D063Z05S22XD17 ..................................J24
VSM17D063Z06S22XD17 ..................................J24
VSM17D080Z06S27XD17 ..................................J24
VSM17D080Z07S27XD17 ..................................J24
VSM17D100Z08S32XD17 ..................................J24
VSM17D125Z09S40XD17 ..................................J24
VSM17D160Z12S40XD17 ..................................J24
VSM17D32Z02M016XD17 .................................J20
VSM17D40Z03M016XD17 .................................J20
VSM490D025Z02A25XN15L100 ........................J34
VSM490D025Z02A25XN15L170 ........................J34
VSM490D025Z02B25XN15 ................................J33
VSM490D025Z02M12XN15 ...............................J32
VSM490D032Z03A32XN15L110 ........................J34
VSM490D032Z03A32XN15L200 ........................J34
VSM490D032Z03B32XN15 ................................J33
VSM490D032Z03M16XN15 ...............................J32
VSM490D032Z04A32XN15L110 ........................J34
VSM490D032Z04A32XN15L200 ........................J34
VSM490D032Z04M16XN15 ...............................J32
VSM490D035Z04M16XN15 ...............................J32
VSM490D040Z03B32XN15 ................................J33
VSM490D040Z04S16XN15 ................................J35
VSM490D040Z05S16XN15 ................................J35
VSM490D050Z04S22XN15 ................................J35
VSM490D050Z05S22XN15 ................................J35
VSM490D050Z06S22XN15 ................................J35
VSM490D063Z05S22XN15 ................................J35
VSM490D063Z06S22XN15 ................................J35
VSM490D063Z07S22XN15 ................................J35
VSM490D080Z05S27XN15 ................................J35
VSM490D080Z07S27XN15 ................................J35
VSM490D080Z09S27XN15 ................................J35
VSM490D100Z08S32XN15 ................................J35
VSM490D100Z11S32XN15 ................................J35
VSM490D125Z09S40XN15 ................................J35
VSM490D125Z12S40XN15 ................................J35
VSM490D160Z12S40XN15 ................................J35
VSM490KITCD25Z02WK15PM ...........................J40
VSM490KITCD25Z02WP40PM ...........................J39
VSM490KITCD25Z02WU35PM ...........................J40
VSM490KITCD32Z03WK15PM ...........................J40
VSM490KITCD32Z03WP40PM ...........................J39
VSM490KITCD32Z03WU35PM ...........................J40
VSM490KITSD100Z08WP40PM..........................J39
VSM490KITSD100Z11WK15PM..........................J40
VSM490KITSD40Z04WK15PM ............................J40
VSM490KITSD40Z04WP40PM ............................J39
VSM490KITSD40Z04WU35PM ...........................J40
VSM490KITSD50Z05WK15PM ............................J40
VSM490KITSD50Z05WP40PM ............................J39
VSM490KITSD50Z05WU35PM ...........................J40
VSM490KITSD50Z06WK15PM ............................J40
VSM490KITSD50Z06WP40PM ............................J39
VSM490KITSD50Z06WU35PM ...........................J40
VSM490KITSD63Z06WP40PM ............................J39
VSM490KITSD63Z06WU35PM ...........................J40
VSM490KITSD63Z07WK15PM ............................J40
VSM490KITSD80Z07WP40PM ............................J39
VSM490KITSD80Z07WU35PM ...........................J40
VSM490KITSD80Z09WK15PM ............................J40
VTSFT6005 WP49EG ..........................................Y35
VTSFT6005 WU41EG ..........................................Y35
VTSFT6006 WP49EG ..........................................Y37
VTSFT6007 WP49EG ..........................................Y35
VTSFT6007 WU41EG ..........................................Y35
VTSFT6008 WP49EG ..........................................Y35
VTSFT6008 WU41EG ..........................................Y35
VTSFT6009 WP49EG ..........................................Y37
VTSFT6010 WP49EG ..........................................Y35
VTSFT6010 WU41EG ..........................................Y35
VTSFT6011 WP49EG ..........................................Y35
VTSFT6011 WU41EG ..........................................Y35
Catalogue No. Page(s) Catalogue No. Page(s) Catalogue No. Page(s)
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 140 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRANDO b 28 20153 09PM
Z141
widia.com
Index by Catalogue Number
Catalogue No. Page(s)
VTSFT6012 WP49EG ..........................................Y37
VTSFT6013 WP49EG ..........................................Y35
VTSFT6013 WU41EG ..........................................Y35
VTSFT6014 WP49EG ..........................................Y35
VTSFT6014 WU41EG ..........................................Y35
VTSFT6015 WP49EG ..........................................Y37
VTSFT6016 WP49EG ..........................................Y35
VTSFT6016 WU41EG ..........................................Y35
VTSFT6017 WP49EG ..........................................Y35
VTSFT6017 WU41EG ..........................................Y35
VTSFT6018 WP49EG ..........................................Y37
VTSFT6019 WP49EG ..........................................Y35
VTSFT6019 WU41EG ..........................................Y35
VTSFT6020 WP49EG ..........................................Y35
VTSFT6020 WU41EG ..........................................Y35
VTSFT6021 WP49EG ..........................................Y37
VTSFT6022 WP49EG ..........................................Y35
VTSFT6022 WU41EG ..........................................Y35
VTSFT6023 WP49EG ..........................................Y35
VTSFT6023 WU41EG ..........................................Y35
VTSFT6024 WP49EG ..........................................Y37
VTSFT6025 WP49EG ..........................................Y35
VTSFT6025 WU41EG ..........................................Y35
VTSFT6026 WP49EG ..........................................Y35
VTSFT6026 WU41EG ..........................................Y35
VTSFT6027 WP49EG ..........................................Y37
VTSFT6028 WP49EG ..........................................Y35
VTSFT6028 WU41EG ..........................................Y35
VTSFT6029 WP49EG ..........................................Y35
VTSFT6029 WU41EG ..........................................Y35
VTSFT6030 WP49EG ..........................................Y37
VTSFT6031 WP49EG ..........................................Y35
VTSFT6031 WU41EG ..........................................Y35
VTSFT6032 WP49EG ..........................................Y35
VTSFT6032 WU41EG ..........................................Y35
VTSFT6033 WP49EG ..........................................Y35
VTSFT6033 WU41EG ..........................................Y35
VTSFT6034 WP49EG ..........................................Y36
VTSFT6034 WU41EG ..........................................Y36
VTSFT6035 WP49EG ..........................................Y36
VTSFT6035 WU41EG ..........................................Y36
VTSFT6036 WP49EG ..........................................Y36
VTSFT6036 WU41EG ..........................................Y36
VTSFT6037 WP49EG ..........................................Y36
VTSFT6037 WU41EG ..........................................Y36
VTSFT6038 WP49EG ..........................................Y36
VTSFT6038 WU41EG ..........................................Y36
VTSFT6039 WP49EG ..........................................Y36
VTSFT6039 WU41EG ..........................................Y36
VTSFT6040 WP49EG ..........................................Y36
VTSFT6040 WU41EG ..........................................Y36
VTSFT6506 WP42EG ..........................................Y38
VTSFT6506 WP49EG ..........................................Y38
VTSFT6506 WU40EG ..........................................Y38
VTSFT6506 WU41EG ..........................................Y38
VTSFT6507 WP49EG ..........................................Y38
VTSFT6508 WP49EG ..........................................Y38
VTSFT6509 WP49EG ..........................................Y38
VTSFT6509 WU40EG ..........................................Y38
VTSFT6509 WU41EG ..........................................Y38
VTSFT6510 WP49EG ..........................................Y38
VTSFT6511 WP42EG ..........................................Y38
VTSFT6511 WP49EG ..........................................Y38
VTSFT6511 WU40EG ..........................................Y38
VTSFT6511 WU41EG ..........................................Y38
VTSFT6512 WP49EG ..........................................Y38
VTSFT6513 WP49EG ..........................................Y38
VTSFT6513 WU40EG ..........................................Y38
VTSFT6513 WU41EG ..........................................Y38
VTSFT6514 WP42EG ..........................................Y38
VTSFT6514 WP49EG ..........................................Y38
VTSFT6514 WU40EG ..........................................Y38
VTSFT6514 WU41EG ..........................................Y38
VTSFT6515 WP49EG ..........................................Y38
VTSFT6516 WP42EG ..........................................Y38
VTSFT6516 WP49EG ..........................................Y38
VTSFT6516 WU40EG ..........................................Y38
VTSFT6516 WU41EG ..........................................Y38
VTSFT6517 WP49EG ..........................................Y38
VTSFT6518 WP42EG ..........................................Y39
VTSFT6518 WP49EG ..........................................Y39
VTSFT6518 WU40EG ..........................................Y39
VTSFT6518 WU41EG ..........................................Y39
VTSFT6519 WP49EG ..........................................Y39
VTSFT6520 WP49EG ..........................................Y39
VTSFT6520 WU40EG ..........................................Y39
VTSFT6521 WP42EG ..........................................Y39
VTSFT6521 WP49EG ..........................................Y39
VTSFT6521 WU40EG ..........................................Y39
VTSFT6521 WU41EG ..........................................Y39
VTSFT6522 WP49EG ..........................................Y39
VTSFT6523 WP42EG ..........................................Y39
VTSFT6523 WP49EG ..........................................Y39
VTSFT6523 WU40EG ..........................................Y39
VTSFT6523 WU41EG ..........................................Y39
VTSFT6524 WP49EG ..........................................Y39
VTSFT6525 WP49EG ..........................................Y38
VTSFT6525 WU40EG ..........................................Y38
VTSFT6526 WP49EG ..........................................Y38
VTSFT6526 WU40EG ..........................................Y38
VTSFT6527 WP49EG ..........................................Y38
VTSFT6527 WU40EG ..........................................Y38
VTSFT6528 WP49EG ..........................................Y39
VTSFT6528 WU40EG ..........................................Y39
VTSFT6529 WP49EG ..........................................Y39
VTSFT6529 WU40EG ..........................................Y39
VTSFT6530 WP49EG ..........................................Y39
VTSFT6530 WU40EG ..........................................Y39
VTSFT6531 WP42EG ..........................................Y39
VTSFT6531 WP49EG ..........................................Y39
VTSFT6531 WU40EG ..........................................Y39
VTSFT6531 WU41EG ..........................................Y39
VTSFT6532 WP49EG ..........................................Y39
VTSFT6533 WP42EG ..........................................Y39
VTSFT6533 WP49EG ..........................................Y39
VTSFT6533 WU40EG ..........................................Y39
VTSFT6533 WU41EG ..........................................Y39
VTSFT6534 WP49EG ..........................................Y39
VTSFT6535 WP49EG ..........................................Y39
VTSFT6535 WU40EG ..........................................Y39
VTSFT6535 WU41EG ..........................................Y39
VTSFT6536 WP49EG ..........................................Y39
VTSFT6537 WP49EG ..........................................Y39
VTSFT6537 WU40EG ..........................................Y39
VTSFT6537 WU41EG ..........................................Y39
VTSFT6538 WP49EG ..........................................Y39
VTSFT6538 WU40EG ..........................................Y39
VTSFT6538 WU41EG ..........................................Y39
VTSFT6539 WP49EG ..........................................Y39
VTSFT6539 WU40EG ..........................................Y39
VTSFT6539 WU41EG ..........................................Y39
VTSFT6540 WP49EG ..........................................Y40
VTSFT6540 WU40EG ..........................................Y40
VTSFT6540 WU41EG ..........................................Y40
VTSFT6541 WP49EG ..........................................Y40
VTSFT6541 WU40EG ..........................................Y40
VTSFT6541 WU41EG ..........................................Y40
VTSFT6542 WP49EG ..........................................Y40
VTSFT6542 WU40EG ..........................................Y40
VTSFT6542 WU41EG ..........................................Y40
VTSFT6543 WP49EG ..........................................Y40
VTSFT6543 WU40EG ..........................................Y40
VTSFT6544 WP49EG ..........................................Y40
VTSFT6544 WU40EG ..........................................Y40
VTSFT6545 WP49EG ..........................................Y38
VTSFT6546 WP49EG ..........................................Y38
VTSFT6546 WU40EG ..........................................Y38
VTSFT6547 WP49EG ..........................................Y38
VTSFT6547 WU40EG ..........................................Y38
VTSFT6548 WP49EG ..........................................Y38
VTSFT6549 WP49EG ..........................................Y38
VTSFT6549 WU40EG ..........................................Y38
VTSFT6550 WP49EG ..........................................Y39
VTSFT6550 WU40EG ..........................................Y39
VTSFT6551 WP42EG ..........................................Y39
VTSFT6551 WP49EG ..........................................Y39
VTSFT6551 WU40EG ..........................................Y39
VTSFT6552 WU40EG ..........................................Y39
VTSFT6553 WP49EG ..........................................Y39
VTSFT6553 WU40EG ..........................................Y39
VTSFT6554 WP42EG ..........................................Y39
VTSFT6554 WP49EG ..........................................Y39
VTSFT6554 WU40EG ..........................................Y39
VTSFT6555 WP49EG ..........................................Y39
VTSFT6555 WU40EG ..........................................Y39
VTSFT6556 WP49EG ..........................................Y39
VTSFT6556 WU40EG ..........................................Y39
VTSFT6557 WP42EG ..........................................Y39
VTSFT6557 WP49EG ..........................................Y39
VTSFT6557 WU40EG ..........................................Y39
VTSFT6558 WU40EG ..........................................Y39
VTSFT6559 WU40EG ..........................................Y39
VTSFT6560 WP42EG ..........................................Y39
VTSFT6560 WP49EG ..........................................Y39
VTSFT6560 WU40EG ..........................................Y39
VTSFT6561 WU40EG ..........................................Y39
VTSFT6562 WP49EG ..........................................Y39
VTSFT6562 WU40EG ..........................................Y39
VTSFT6563 WU40EG ..........................................Y39
VTSFT6564 WP49EG ..........................................Y39
VTSFT6564 WU40EG ..........................................Y39
VTSFT6565 WU40EG ..........................................Y39
VTSFT6566 WU40EG ..........................................Y39
VTSFT6567 WP49EG ..........................................Y39
VTSFT6567 WU40EG ..........................................Y39
VTSFT6568 WU40EG ..........................................Y39
VTSFT6569 WP49EG ..........................................Y39
VTSFT6569 WU40EG ..........................................Y39
VTSFT6570 WU40EG ..........................................Y39
VTSFT6571 WP49EG ..........................................Y40
VTSFT6571 WU40EG ..........................................Y40
VTSFT6572 WU40EG ..........................................Y40
VTSFT6573 WU40EG ..........................................Y40
VTSFT6574 WP42EG ..........................................Y41
VTSFT6574 WP49EG ..........................................Y41
VTSFT6575 WP42EG ..........................................Y41
VTSFT6575 WP49EG ..........................................Y41
VTSFT6576 WP42EG ..........................................Y41
VTSFT6576 WP49EG ..........................................Y41
VTSFT6577 WP42EG ..........................................Y41
VTSFT6577 WP49EG ..........................................Y41
VTSFT6578 WP42EG ..........................................Y41
VTSFT6578 WP49EG ..........................................Y41
VTSFT6579 WP42EG ..........................................Y41
VTSFT6579 WP49EG ..........................................Y41
VTSFT6580 WP42EG ..........................................Y41
VTSFT6580 WP49EG ..........................................Y41
VTSFT6581 WP42EG ..........................................Y41
VTSFT6581 WP49EG ..........................................Y41
VTSFT6582 WP49EG ..........................................Y41
VTSFT6583 WP42EG ..........................................Y41
VTSFT6583 WP49EG ..........................................Y41
VTSFT6584 WP42EG ..........................................Y41
VTSFT6584 WP49EG ..........................................Y41
VTSFT6585 WP42EG ..........................................Y41
VTSFT6585 WP49EG ..........................................Y41
VTSFT6586 WP42EG ..........................................Y41
VTSFT6586 WP49EG ..........................................Y41
VTSFT6587 WP42EG ..........................................Y41
VTSFT6587 WP49EG ..........................................Y41
VTSFT6588 WP42EG ..........................................Y41
VTSFT6588 WP49EG ..........................................Y41
VTSFT7505 WU40EG ..........................................Y42
VTSFT7505 WU41EG ..........................................Y42
VTSFT7506 WU40EG ..........................................Y42
VTSFT7506 WU41EG ..........................................Y42
VTSFT7507 WU40EG ..........................................Y42
VTSFT7507 WU41EG ..........................................Y42
VTSFT7508 WU40EG ..........................................Y42
VTSFT7508 WU41EG ..........................................Y42
VTSFT7509 WU40EG ..........................................Y42
VTSFT7509 WU41EG ..........................................Y42
VTSFT7510 WU40EG ..........................................Y42
VTSFT7510 WU41EG ..........................................Y42
VTSFT7511 WU40EG ..........................................Y42
VTSFT7512 WU40EG ..........................................Y42
VTSFT7513 WU40EG ..........................................Y42
VTSFT7514 WU40EG ..........................................Y42
VTSFT7515 WU40EG ..........................................Y42
VTSFT7516 WU40EG ..........................................Y42
VTSFT7517 WU40EG ..........................................Y42
VTSFT7518 WU40EG ..........................................Y42
VTSFT7519 WU40EG ..........................................Y42
VTSPO6005 WP49EG .........................................Y11
VTSPO6005 WU41EG .........................................Y11
VTSPO6006 WP49EG .........................................Y13
VTSPO6006 WU41EG .........................................Y13
VTSPO6007 WP49EG .........................................Y11
VTSPO6007 WU41EG .........................................Y11
VTSPO6008 WP49EG .........................................Y11
VTSPO6008 WU41EG .........................................Y11
VTSPO6009 WP49EG .........................................Y13
VTSPO6009 WU41EG .........................................Y13
VTSPO6010 WP49EG .........................................Y11
VTSPO6010 WU41EG .........................................Y11
VTSPO6011 WP49EG .........................................Y11
VTSPO6011 WU41EG .........................................Y11
VTSPO6012 WP49EG .........................................Y13
VTSPO6012 WU41EG .........................................Y13
VTSPO6013 WP49EG .........................................Y11
VTSPO6013 WU41EG .........................................Y11
VTSPO6014 WP49EG .........................................Y11
VTSPO6014 WU41EG .........................................Y11
VTSPO6015 WP49EG .........................................Y13
VTSPO6015 WU41EG .........................................Y13
VTSPO6016 WP49EG .........................................Y11
VTSPO6016 WU41EG .........................................Y11
VTSPO6017 WP49EG .........................................Y11
VTSPO6017 WU41EG .........................................Y11
VTSPO6018 WP49EG .........................................Y13
VTSPO6018 WU41EG .........................................Y13
VTSPO6019 WP49EG .........................................Y11
Catalogue No. Page(s) Catalogue No. Page(s) Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 141 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRAND O b 28 2015 3 09 PM
Z142 widia.com
Index by Catalogue Number
Index
Catalogue No. Page(s)
VTSPO6019 WU41EG .........................................Y11
VTSPO6020 WP49EG .........................................Y11
VTSPO6020 WU41EG .........................................Y11
VTSPO6021 WP49EG .........................................Y13
VTSPO6021 WU41EG .........................................Y13
VTSPO6022 WP49EG .........................................Y11
VTSPO6022 WU41EG .........................................Y11
VTSPO6023 WP49EG .........................................Y11
VTSPO6023 WU41EG .........................................Y11
VTSPO6024 WP49EG .........................................Y13
VTSPO6024 WU41EG .........................................Y13
VTSPO6025 WP49EG .........................................Y11
VTSPO6025 WU41EG .........................................Y11
VTSPO6026 WP49EG .........................................Y11
VTSPO6026 WU41EG .........................................Y11
VTSPO6027 WP49EG .........................................Y13
VTSPO6027 WU41EG .........................................Y13
VTSPO6028 WP49EG .........................................Y11
VTSPO6028 WU41EG .........................................Y11
VTSPO6029 WP49EG .........................................Y11
VTSPO6029 WU41EG .........................................Y11
VTSPO6030 WP49EG .........................................Y13
VTSPO6030 WU41EG .........................................Y13
VTSPO6031 WP49EG .........................................Y11
VTSPO6031 WU41EG .........................................Y11
VTSPO6032 WP49EG .........................................Y11
VTSPO6032 WU41EG .........................................Y11
VTSPO6033 WP49EG .........................................Y11
VTSPO6033 WU41EG .........................................Y11
VTSPO6034 WP49EG .........................................Y12
VTSPO6034 WU41EG .........................................Y12
VTSPO6035 WP49EG .........................................Y12
VTSPO6035 WU41EG .........................................Y12
VTSPO6036 WP49EG .........................................Y12
VTSPO6036 WU41EG .........................................Y12
VTSPO6037 WP49EG .........................................Y12
VTSPO6037 WU41EG .........................................Y12
VTSPO6038 WP49EG .........................................Y12
VTSPO6038 WU41EG .........................................Y12
VTSPO6039 WP49EG .........................................Y12
VTSPO6039 WU41EG .........................................Y12
VTSPO6040 WP49EG .........................................Y12
VTSPO6040 WU41EG .........................................Y12
VTSPO6505 WP42EG .........................................Y14
VTSPO6505 WP49EG .........................................Y14
VTSPO6505 WU40EG .........................................Y14
VTSPO6505 WU41EG .........................................Y14
VTSPO6506 WP49EG .........................................Y14
VTSPO6507 WP49EG .........................................Y14
VTSPO6508 WP49EG .........................................Y14
VTSPO6508 WU40EG .........................................Y14
VTSPO6508 WU41EG .........................................Y14
VTSPO6509 WP49EG .........................................Y14
VTSPO6510 WP42EG .........................................Y14
VTSPO6510 WP49EG .........................................Y14
VTSPO6510 WU40EG .........................................Y14
VTSPO6510 WU41EG .........................................Y14
VTSPO6511 WP49EG .........................................Y14
VTSPO6512 WP49EG .........................................Y14
VTSPO6512 WU40EG .........................................Y14
VTSPO6512 WU41EG .........................................Y14
VTSPO6513 WP42EG .........................................Y14
VTSPO6513 WP49EG .........................................Y14
VTSPO6513 WU40EG .........................................Y14
VTSPO6513 WU41EG .........................................Y14
VTSPO6514 WP49EG .........................................Y14
VTSPO6515 WP42EG .........................................Y14
VTSPO6515 WP49EG .........................................Y14
VTSPO6515 WU40EG .........................................Y14
VTSPO6515 WU41EG .........................................Y14
VTSPO6516 WP49EG .........................................Y14
VTSPO6517 WP42EG .........................................Y14
VTSPO6517 WP49EG .........................................Y14
VTSPO6517 WU40EG .........................................Y14
VTSPO6517 WU41EG .........................................Y14
VTSPO6518 WP49EG .........................................Y14
VTSPO6519 WP42EG .........................................Y15
VTSPO6519 WP49EG .........................................Y15
VTSPO6519 WU40EG .........................................Y15
VTSPO6519 WU41EG .........................................Y15
VTSPO6520 WP49EG .........................................Y15
VTSPO6521 WP42EG .........................................Y15
VTSPO6521 WP49EG .........................................Y15
VTSPO6521 WU40EG .........................................Y15
VTSPO6521 WU41EG .........................................Y15
VTSPO6522 WP49EG .........................................Y15
VTSPO6523 WP42EG .........................................Y15
VTSPO6523 WP49EG .........................................Y15
VTSPO6523 WU40EG .........................................Y15
VTSPO6523 WU41EG .........................................Y15
VTSPO6524 WP49EG .........................................Y15
VTSPO6525 WP49EG .........................................Y14
VTSPO6525 WU40EG .........................................Y14
VTSPO6525 WU41EG .........................................Y14
VTSPO6526 WP49EG .........................................Y14
VTSPO6526 WU40EG .........................................Y14
VTSPO6526 WU41EG .........................................Y14
VTSPO6527 WP49EG .........................................Y14
VTSPO6527 WU40EG .........................................Y14
VTSPO6527 WU41EG .........................................Y14
VTSPO6528 WP49EG .........................................Y14
VTSPO6528 WU40EG .........................................Y14
VTSPO6528 WU41EG .........................................Y14
VTSPO6529 WP49EG .........................................Y15
VTSPO6529 WU40EG .........................................Y15
VTSPO6529 WU41EG .........................................Y15
VTSPO6530 WP49EG .........................................Y15
VTSPO6530 WU40EG .........................................Y15
VTSPO6530 WU41EG .........................................Y15
VTSPO6531 WP42EG .........................................Y15
VTSPO6531 WP49EG .........................................Y15
VTSPO6531 WU40EG .........................................Y15
VTSPO6531 WU41EG .........................................Y15
VTSPO6532 WP49EG .........................................Y15
VTSPO6533 WP42EG .........................................Y15
VTSPO6533 WP49EG .........................................Y15
VTSPO6533 WU40EG .........................................Y15
VTSPO6533 WU41EG .........................................Y15
VTSPO6534 WP49EG .........................................Y15
VTSPO6535 WP42EG .........................................Y15
VTSPO6535 WP49EG .........................................Y15
VTSPO6535 WU40EG .........................................Y15
VTSPO6535 WU41EG .........................................Y15
VTSPO6536 WP49EG .........................................Y15
VTSPO6537 WP42EG .........................................Y15
VTSPO6537 WP49EG .........................................Y15
VTSPO6537 WU40EG .........................................Y15
VTSPO6537 WU41EG .........................................Y15
VTSPO6538 WP42EG .........................................Y15
VTSPO6538 WP49EG .........................................Y15
VTSPO6538 WU40EG .........................................Y15
VTSPO6538 WU41EG .........................................Y15
VTSPO6539 WP42EG .........................................Y16
VTSPO6539 WP49EG .........................................Y16
VTSPO6539 WU40EG .........................................Y16
VTSPO6539 WU41EG .........................................Y16
VTSPO6540 WP42EG .........................................Y16
VTSPO6540 WP49EG .........................................Y16
VTSPO6540 WU40EG .........................................Y16
VTSPO6540 WU41EG .........................................Y16
VTSPO6541 WP49EG .........................................Y16
VTSPO6541 WU40EG .........................................Y16
VTSPO6541 WU41EG .........................................Y16
VTSPO6542 WP49EG .........................................Y16
VTSPO6542 WU40EG .........................................Y16
VTSPO6542 WU41EG .........................................Y16
VTSPO6543 WP49EG .........................................Y16
VTSPO6544 WP49EG .........................................Y16
VTSPO6545 WP49EG .........................................Y14
VTSPO6545 WU40EG .........................................Y14
VTSPO6546 WP49EG .........................................Y14
VTSPO6546 WU40EG .........................................Y14
VTSPO6547 WP49EG .........................................Y14
VTSPO6547 WU40EG .........................................Y14
VTSPO6548 WP49EG .........................................Y14
VTSPO6548 WU40EG .........................................Y14
VTSPO6549 WP49EG .........................................Y14
VTSPO6549 WU40EG .........................................Y14
VTSPO6550 WP49EG .........................................Y14
VTSPO6550 WU40EG .........................................Y14
VTSPO6551 WP49EG .........................................Y15
VTSPO6551 WU40EG .........................................Y15
VTSPO6552 WP49EG .........................................Y15
VTSPO6552 WU40EG .........................................Y15
VTSPO6553 WP49EG .........................................Y15
VTSPO6553 WU40EG .........................................Y15
VTSPO6554 WP49EG .........................................Y15
VTSPO6554 WU40EG .........................................Y15
VTSPO6555 WP49EG .........................................Y15
VTSPO6555 WU40EG .........................................Y15
VTSPO6556 WP49EG .........................................Y15
VTSPO6556 WU40EG .........................................Y15
VTSPO6557 WP49EG .........................................Y15
VTSPO6557 WU40EG .........................................Y15
VTSPO6558 WP49EG .........................................Y15
VTSPO6558 WU40EG .........................................Y15
VTSPO6559 WP49EG .........................................Y15
VTSPO6559 WU40EG .........................................Y15
VTSPO6560 WP49EG .........................................Y15
VTSPO6560 WU40EG .........................................Y15
VTSPO6561 WP49EG .........................................Y15
VTSPO6561 WU40EG .........................................Y15
VTSPO6562 WP49EG .........................................Y15
VTSPO6562 WU40EG .........................................Y15
VTSPO6563 WP49EG .........................................Y15
VTSPO6563 WU40EG .........................................Y15
VTSPO6564 WP49EG .........................................Y15
VTSPO6564 WU40EG .........................................Y15
VTSPO6565 WP49EG .........................................Y15
VTSPO6565 WU40EG .........................................Y15
VTSPO6566 WP49EG .........................................Y15
VTSPO6566 WU40EG .........................................Y15
VTSPO6567 WP49EG .........................................Y15
VTSPO6567 WU40EG .........................................Y15
VTSPO6568 WP49EG .........................................Y15
VTSPO6568 WU40EG .........................................Y15
VTSPO6569 WP49EG .........................................Y15
VTSPO6569 WU40EG .........................................Y15
VTSPO6570 WP49EG .........................................Y15
VTSPO6570 WU40EG .........................................Y15
VTSPO6571 WP49EG .........................................Y16
VTSPO6571 WU40EG .........................................Y16
VTSPO6572 WU40EG .........................................Y16
VTSPO6573 WP49EG .........................................Y16
VTSPO6573 WU40EG .........................................Y16
VTSPO6574 WU40EG .........................................Y16
VTSPO6575 WU40EG .........................................Y16
VTSPO7505 WU40EG .........................................Y17
VTSPO7505 WU41EG .........................................Y17
VTSPO7506 WU40EG .........................................Y17
VTSPO7506 WU41EG .........................................Y17
VTSPO7507 WU40EG .........................................Y17
VTSPO7507 WU41EG .........................................Y17
VTSPO7508 WU40EG .........................................Y17
VTSPO7508 WU41EG .........................................Y17
VTSPO7509 WU40EG .........................................Y17
VTSPO7509 WU41EG .........................................Y17
VTSPO7510 WU40EG .........................................Y17
VTSPO7510 WU41EG .........................................Y17
VTSPO7511 WU40EG .........................................Y17
VTSPO7512 WU40EG .........................................Y17
VTSPO7513 WU40EG .........................................Y17
VTSPO7514 WU40EG .........................................Y17
VTSPO7515 WU40EG .........................................Y17
VTSPO7516 WU40EG .........................................Y17
VTSPO7517 WU40EG .........................................Y17
VTSPO7518 WU40EG .........................................Y17
VTSPO7519 WU40EG .........................................Y17
VXGX10030234 WP20PH .................................. U17
WGMEL2525 W ..................................................E37
WGMEL3232 W ..................................................E37
WGMER2525 W ..................................................E37
WGMER3232 W ..................................................E37
WGMSL1620 W ..................................................E36
WGMSL2020 W ..................................................E36
WGMSL2525 W ..................................................E36
WGMSL3232 W ..................................................E36
WGMSR2020 W ..................................................E36
WGMSR2525 W ..................................................E36
WGMSR3232 W ..................................................E36
WMTAL2525M316-070-100 ..............................E34
WMTAL2525M319-100-205 ..............................E34
WMTAR2525M316-070-100 ..............................E34
WMTAR2525M319-100-205 ..............................E34
WMTAR2525M619-070-100 ..............................E34
WMTBL2525M313-038-052 WG ........................E33
WMTBL2525M316-052-070 WG ........................E33
WMTBL2525M316-070-100 WG ........................E33
WMTBL2525M319-100-205 WG ........................E33
WMTBL2525M412-032-052 W ..........................E33
WMTBL2525M415-052-070 W ..........................E33
WMTBL2525M415-070-100 W ..........................E33
WMTBL2525M418-100-205 W ..........................E33
WMTBL2525M519-052-070 WG ........................E33
WMTBL2525M519-070-100 WG ........................E33
WMTBL2525M525-100-205 WG ........................E33
WMTBL2525M616-038-052 WG ........................E33
WMTBL2525M625-100-205 WG ........................E33
WMTBR2525M313-038-052 WG .......................E33
WMTBR2525M316-052-070 WG .......................E33
WMTBR2525M316-070-100 WG .......................E33
WMTBR2525M319-100-205 WG .......................E33
WMTBR2525M412-032-052 W ..........................E33
WMTBR2525M415-052-070 W ..........................E33
WMTBR2525M418-100-205 W ..........................E33
WMTBR2525M519-052-070 WG .......................E33
WMTBR2525M519-070-100 WG .......................E33
WMTBR2525M525-100-205 WG .......................E33
WMTBR2525M616-038-052 WG .......................E33
WMTBR2525M619-070-100 WG .......................E33
WMTBR2525M625-100-205 WG .......................E33
WMTC015L05CM08 WU25PT.............................E14
Catalogue No. Page(s) Catalogue No. Page(s) Catalogue No. Page(s)
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 142 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRANDO b 28 20153 09PM
Z143
widia.com
Index by Catalogue Number
Catalogue No. Page(s)
WMTC015N00CM08 WU25PT ............................E14
WMTC015N00CMW08 WU25PT .........................E16
WMTC015R05CM08 WU25PT ............................E15
WMTC015R12CM08 WU25PT ............................E15
WMTC020L05CM08 WU25PT.............................E14
WMTC020L12CM08 WU25PT.............................E14
WMTC020L12CMW08 WU25PT .........................E16
WMTC020N00CM08 WU25PT ............................E14
WMTC020N00CMW08 WU25PT .........................E16
WMTC020R05CM08 WU25PT ............................E15
WMTC020R05CMW08 WU25PT .........................E17
WMTC020R12CM08 WU25PT ............................E15
WMTC020R12CMW08 WU25PT .........................E17
WMTC030L05CM17 WU25PT.............................E14
WMTC030L05CMW17 WU25PT .........................E16
WMTC030L12CM17 WU25PT.............................E14
WMTC030L12CMW17 WU25PT .........................E16
WMTC030N00CM17 WU25PT ............................E14
WMTC030N00CMW17 WU25PT .........................E16
WMTC030R05CM17 WU25PT ............................E15
WMTC030R05CMW17 WU25PT .........................E17
WMTC030R12CM17 WU25PT ............................E15
WMTC030R12CMW17 WU25PT .........................E17
WMTC040L05CM17 WU25PT.............................E14
WMTC040L12CM17 WU25PT.............................E14
WMTC040N00CM17 WU25PT ............................E14
WMTC040N00CMW17 WU25PT .........................E16
WMTC040R05CM17 WU25PT ............................E15
WMTC040R12CM17 WU25PT ............................E15
WMTC094N00CM13 WU25PT ............................E14
WMTC094N00CMW13 WU25PT .........................E16
WMTC094R05CM13 WU25PT ............................E15
WMTC094R05CMW13 WU25PT .........................E17
WMTC094R12CM13 WU25PT ............................E15
WMTC094R12CMW13 WU25PT .........................E17
WMTC125N00CM17 WU25PT ............................E14
WMTC125N00CMW17 WU25PT .........................E16
WMTC125R05CM17 WU25PT ............................E15
WMTC125R05CMW17 WU25PT .........................E17
WMTC125R12CM17 WU25PT ............................E15
WMTC125R12CMW17 WU25PT .........................E17
WMTCL1010H110 WG .......................................E32
WMTCL1010H210 WG .......................................E32
WMTCL1212H110 WG .......................................E32
WMTCL1212H210 WG .......................................E32
WMTCL1212H2B16 ............................................E32
WMTCL1616K113 WG ........................................E32
WMTCL1616K213 WG ........................................E32
WMTCL2020K113 WG ........................................E32
WMTCL2020K213 WG ........................................E32
WMTCR1010H110 WG .......................................E32
WMTCR1010H210 WG .......................................E32
WMTCR1212H110 WG .......................................E32
WMTCR1212H210 WG .......................................E32
WMTCR1212H2B16 ...........................................E32
WMTCR1616K113 WG .......................................E32
WMTCR1616K213 WG .......................................E32
WMTCR2020K113 WG .......................................E32
WMTCR2020K213 WG .......................................E32
WMTCR2525M2B19...........................................E30
WMTR188I5PPC WU10PT ...................................E26
WMTR188I5PPC WU25PT ...................................E26
WMTR250I6PPC WU10PT ...................................E26
WMTR250I6PPC WU25PT ...................................E26
WMTR300M3PPC WU10HT ................................E26
WMTR300M3PPC WU10PT.................................E26
WMTR300M3PPC WU25PT.................................E26
WMTR305M3UPC WP10CT ................................E25
WMTR305M3UPC WU10PT ................................E25
WMTR305M3UPC WU25PT ................................E25
WMTR312I8PPC WU10PT ...................................E26
WMTR312I8PPC WU25PT ...................................E26
WMTR400M4PPC WU10HT ................................E26
WMTR400M4PPC WU10PT.................................E26
WMTR400M4PPC WU25PT.................................E26
WMTR405M4UPC WP10CT ................................E25
WMTR405M4UPC WU10PT ................................E25
WMTR405M4UPC WU25PT ................................E25
WMTR500M5PPC WU10PT.................................E26
WMTR500M5PPC WU25PT.................................E26
WMTR505M5UPC WP10CT ................................E25
WMTR505M5UPC WU10PT ................................E25
WMTR505M5UPC WU25PT ................................E25
WMTR600M6PPC WU10PT.................................E26
WMTR600M6PPC WU25PT.................................E26
WMTR605M6UPC WP10CT ................................E25
WMTR605M6UPC WU10PT ................................E25
WMTR605M6UPC WU25PT ................................E25
WMTR800M8PPC WU10PT.................................E26
WMTR800M8PPC WU25PT.................................E26
WMTR805M8UPC WP10CT ................................E25
WMTR805M8UPC WU10PT ................................E25
WMTR805M8UPC WU25PT ................................E25
WMTS094I2BP02PT WU10PT .............................E19
WMTS094I2BP02PT WU25PT .............................E19
WMTS094I2BP04PT WU10PT .............................E19
WMTS094I2BP04PT WU25PT .............................E19
WMTS125I3P03PH WU10PT .......................E19, E23
WMTS125I3P03PH WU25PT .......................E19, E23
WMTS125I3P03PT WU10PT ...............................E19
WMTS125I3P03PT WU25PT ...............................E19
WMTS125I3P08PH WU10PT .......................E19, E23
WMTS125I3P08PH WU25PT .......................E19, E23
WMTS125I3P08PT WU10PT ...............................E19
WMTS125I3P08PT WU25PT ...............................E19
WMTS156I4P03PH WU10PT .......................E19, E23
WMTS156I4P03PH WU25PT .......................E19, E23
WMTS156I4P08PH WU10PT .......................E19, E23
WMTS156I4P08PH WU25PT .......................E19, E23
WMTS188I5P03PH WU10PT .......................E20, E23
WMTS188I5P03PH WU25PT .......................E20, E23
WMTS188I5P03PT WU10PT ...............................E20
WMTS188I5P03PT WU25PT ...............................E20
WMTS188I5P08PH WU10PT .......................E20, E23
WMTS188I5P08PH WU25PT .......................E20, E23
WMTS188I5P08PT WU10PT ...............................E20
WMTS188I5P08PT WU25PT ...............................E20
WMTS200M2P02PT WU10PT .............................E19
WMTS200M2P02PT WU25PT .............................E19
WMTS205M2U02PT WP10CT .............................E18
WMTS205M2U02PT WP25CT .............................E18
WMTS205M2U02PT WU10PT .............................E18
WMTS205M2U02PT WU25PT .............................E18
WMTS250I6P03PH WU10PT .......................E21, E24
WMTS250I6P03PH WU25PT .......................E21, E24
WMTS250I6P03PT WU10PT ...............................E21
WMTS250I6P03PT WU25PT ...............................E21
WMTS250I6P08PH WU10PT .......................E20, E24
WMTS250I6P08PH WU25PT .......................E20, E24
WMTS250I6P08PT WU10PT ...............................E21
WMTS250I6P08PT WU25PT ...............................E21
WMTS300M3P03PH WU10HT ....................E19, E23
WMTS300M3P03PH WU10PT ....................E19, E23
WMTS300M3P03PH WU25PT ....................E19, E23
WMTS300M3P03PT WU10HT .............................E19
WMTS300M3P03PT WU10PT .............................E19
WMTS300M3P03PT WU25PT .............................E19
WMTS300M3P06PH WU10HT ....................E19, E23
WMTS300M3P06PH WU10PT ....................E19, E23
WMTS300M3P06PH WU25PT ....................E19, E23
WMTS300M3P06PT WU10PT .............................E19
WMTS300M3P06PT WU25PT .............................E19
WMTS305M3U03PH WU10PT ............................E22
WMTS305M3U03PH WU25PT ............................E22
WMTS305M3U03PT WP10CT .............................E18
WMTS305M3U03PT WP25CT .............................E18
WMTS305M3U03PT WU10PT .............................E18
WMTS305M3U03PT WU25PT .............................E18
WMTS305M3U06PH WU10PT ............................E22
WMTS305M3U06PH WU25PT ............................E22
WMTS305M3U06PT WP10CT .............................E18
WMTS305M3U06PT WP25CT .............................E18
WMTS305M3U06PT WU10PT .............................E18
WMTS305M3U06PT WU25PT .............................E18
WMTS312I8P03PH WU10PT .......................E21, E24
WMTS312I8P03PH WU25PT .......................E21, E24
WMTS312I8P08PH WU10PT .......................E21, E24
WMTS312I8P08PH WU25PT .......................E21, E24
WMTS400M4P03PH WU10HT ....................E19, E23
WMTS400M4P03PH WU10PT ....................E19, E23
WMTS400M4P03PH WU25PT ....................E19, E23
WMTS400M4P03PT WU10HT .............................E19
WMTS400M4P03PT WU10PT .............................E19
WMTS400M4P03PT WU25PT .............................E19
WMTS400M4P06PH WU10HT ....................E19, E23
WMTS400M4P06PH WU10PT ....................E19, E23
WMTS400M4P06PH WU25PT ....................E19, E23
WMTS400M4P06PT WU10PT .............................E20
WMTS400M4P06PT WU25PT .............................E20
WMTS405M4U03PH WU10PT ............................E22
WMTS405M4U03PH WU25PT ............................E22
WMTS405M4U03PT WP10CT .............................E18
WMTS405M4U03PT WP25CT .............................E18
WMTS405M4U03PT WU10PT .............................E18
WMTS405M4U03PT WU25PT .............................E18
WMTS405M4U06PH WU10PT ............................E22
WMTS405M4U06PH WU25PT ............................E22
WMTS405M4U06PT WP10CT .............................E18
WMTS405M4U06PT WP25CT .............................E18
WMTS405M4U06PT WU10PT .............................E18
WMTS405M4U06PT WU25PT .............................E18
WMTS500M5P03PH WU10HT ....................E20, E24
WMTS500M5P03PH WU10PT ....................E20, E24
WMTS500M5P03PH WU25PT ....................E20, E24
WMTS500M5P03PT WU10HT .............................E20
WMTS500M5P03PT WU10PT .............................E20
WMTS500M5P03PT WU25PT .............................E20
WMTS500M5P06PH WU10HT ....................E20, E24
WMTS500M5P06PH WU10PT ....................E20, E24
WMTS500M5P06PH WU25PT ....................E20, E24
WMTS500M5P06PT WU10PT .............................E20
WMTS500M5P06PT WU25PT .............................E20
WMTS505M5U03PH WU10PT ............................E22
WMTS505M5U03PH WU25PT ............................E22
WMTS505M5U03PT WP10CT .............................E18
WMTS505M5U03PT WP25CT .............................E18
WMTS505M5U03PT WU10PT .............................E18
WMTS505M5U03PT WU25PT .............................E18
WMTS505M5U06PH WU10PT ............................E22
WMTS505M5U06PH WU25PT ............................E22
WMTS505M5U06PT WP10CT .............................E18
WMTS505M5U06PT WP25CT .............................E18
WMTS505M5U06PT WU10PT .............................E18
WMTS505M5U06PT WU25PT .............................E18
WMTS600M6P03PH WU10PT ....................E20, E24
WMTS600M6P03PH WU25PT ....................E20, E24
WMTS600M6P03PT WU10PT .............................E20
WMTS600M6P03PT WU25PT .............................E20
WMTS600M6P06PH WU10PT ....................E20, E24
WMTS600M6P06PH WU25PT ....................E20, E24
WMTS600M6P06PT WU10PT .............................E20
WMTS600M6P06PT WU25PT .............................E20
WMTS605M6U03PH WU10PT ............................E22
WMTS605M6U03PH WU25PT ............................E22
WMTS605M6U03PT WP10CT .............................E18
WMTS605M6U03PT WP25CT .............................E18
WMTS605M6U03PT WU10PT .............................E18
WMTS605M6U03PT WU25PT .............................E18
WMTS605M6U06PH WU10PT ............................E22
WMTS605M6U06PH WU25PT ............................E22
WMTS605M6U06PT WP10CT .............................E18
WMTS605M6U06PT WP25CT .............................E18
WMTS605M6U06PT WU10PT .............................E18
WMTS605M6U06PT WU25PT .............................E18
WMTS800M8P03PH WU10PT ....................E21, E24
WMTS800M8P03PH WU25PT ....................E21, E24
WMTS800M8P06PH WU10PT ....................E21, E24
WMTS800M8P06PH WU25PT ....................E21, E24
WMTS800M8P06PT WU10PT .............................E21
WMTS800M8P06PT WU25PT .............................E21
WMTS800M8P15PT WU10PT .............................E21
WMTS800M8P15PT WU25PT .............................E21
WMTS805M8U03PH WU10PT ............................E22
WMTS805M8U03PH WU25PT ............................E22
WMTS805M8U06PH WU10PT ............................E22
WMTS805M8U06PH WU25PT ............................E22
WMTS805M8U06PT WP10CT .............................E18
WMTS805M8U06PT WP25CT .............................E18
WMTS805M8U06PT WU10PT .............................E18
WMTS805M8U06PT WU25PT .............................E18
WMTS805M8U15PT WP10CT .............................E18
WMTS805M8U15PT WP25CT .............................E18
WMTS805M8U15PT WU10PT .............................E18
WMTS805M8U15PT WU25PT .............................E18
WMTSL1616K216 WG ........................................E31
WMTSL1616K2B19 ............................................E31
WMTSL1616K311 WG ........................................E31
WMTSL1616K322 WG ........................................E31
WMTSL1616K422 WG ........................................E31
WMTSL1616K514 WG ........................................E31
WMTSL2020K216 WG ........................................E31
WMTSL2020K22 W ............................................E31
WMTSL2020K2B19 ............................................E31
WMTSL2020K311 WG ........................................E31
WMTSL2020K322 WG ........................................E31
WMTSL2020K411 WG ........................................E31
WMTSL2020K514 WG ........................................E31
WMTSL2020L614 WG ........................................E31
WMTSL2525M11 W ...........................................E31
WMTSL2525M116 WG .......................................E31
WMTSL2525M216 WG .......................................E31
WMTSL2525M311 WG .......................................E31
WMTSL2525M322 WG .......................................E31
WMTSL2525M422 WG .......................................E31
WMTSL2525M514 WG .......................................E31
WMTSL2525M525 WG .......................................E31
WMTSL2525M614 WG .......................................E31
WMTSL2525M625 WG .......................................E31
WMTSL2525M814 .............................................E31
WMTSL2525M825 WG .......................................E31
WMTSL3232M814 WG .......................................E31
WMTSL3232M825 WG .......................................E31
Catalogue No. Page(s) Catalogue No. Page(s) Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 143 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRAND O b 28 2015 3 09 PM
Z144 widia.com
Index by Catalogue Number
Index
Catalogue No. Page(s)
WMTSR1616411 WG..........................................E30
WMTSR1616K216 WG .......................................E30
WMTSR1616K2B19 ............................................E30
WMTSR1616K311 WG .......................................E30
WMTSR1616K322 WG .......................................E30
WMTSR1616K422 WG .......................................E30
WMTSR1616K514 WG .......................................E30
WMTSR2020K20 W ............................................E30
WMTSR2020K216 WG .......................................E30
WMTSR2020K2B19 ............................................E30
WMTSR2020K311 WG .......................................E30
WMTSR2020K322 WG .......................................E30
WMTSR2020K411 WG .......................................E30
WMTSR2020K514 WG .......................................E30
WMTSR2020L525 WG ........................................E30
WMTSR2020L614 WG ........................................E30
WMTSR2525M11 W ...........................................E30
WMTSR2525M116 WG.......................................E30
WMTSR2525M216 WG.......................................E30
WMTSR2525M311 WG.......................................E30
WMTSR2525M322 WG.......................................E30
WMTSR2525M422 WG.......................................E30
WMTSR2525M514 WG.......................................E30
WMTSR2525M525 WG.......................................E30
WMTSR2525M614 WG.......................................E30
WMTSR2525M625 WG.......................................E30
WMTSR2525M814 WG.......................................E30
WMTSR2525M825 WG.......................................E30
WMTSR3232M814 WG.......................................E30
WMTSR3232M825 WG.......................................E30
WMTWGML114S W ............................................E38
WMTWGML213S W ............................................E38
WMTWGML2B16S W ..........................................E38
WMTWGML313B038-052 W ..............................E39
WMTWGML316B052-070 W ..............................E39
WMTWGML316B070-100 W ..............................E39
WMTWGML319100-205 W ................................E39
WMTWGML319S W ............................................E38
WMTWGML413B038-052 W ..............................E39
WMTWGML416B052-070 W ..............................E39
WMTWGML416B070-100 W ..............................E39
WMTWGML419B100-205 W ..............................E39
WMTWGML419S W ............................................E38
WMTWGML516B038-052 W ..............................E39
WMTWGML519B052-070 W ..............................E39
WMTWGML519B070-100 W ..............................E39
WMTWGML522B100-205 W ..............................E39
WMTWGML522S W ............................................E38
WMTWGML616B030-052 W ..............................E39
WMTWGML619B052-070 W ..............................E39
WMTWGML619B070-100 W ..............................E39
WMTWGML622B100-205 W ..............................E39
WMTWGML622S W ............................................E38
WMTWGMR114S W ............................................E38
WMTWGMR213S W ............................................E38
WMTWGMR2B16S W..........................................E38
WMTWGMR313B038-052 W ..............................E39
WMTWGMR316B052-070 W ..............................E39
WMTWGMR316B070-100 W ..............................E39
WMTWGMR319B100-205 W ..............................E39
WMTWGMR319S W ............................................E38
WMTWGMR416B052-070 W ..............................E39
WMTWGMR416B070-100 W ..............................E39
WMTWGMR419B100-205 W ..............................E39
WMTWGMR419S W ............................................E38
WMTWGMR522B100-205 W ..............................E39
WMTWGMR522S W ............................................E38
WMTWGMR622B100-205 W ..............................E39
WMTWGMR622S W ............................................E38
WNGA080404FST WDN25U............................. B218
WNGA080408FST WDN25U............................. B218
WNGA080408T02020 CW5025 ...................... B195
WNGA080412T02020 CW5025 ...................... B195
WNGA080416T02020 CW5025 ...................... B195
WNGG080404FS WS10PT ................................. B99
WNGG080404FS WS25PT ................................. B99
WNGG080404FS WU10HT ................................. B99
WNGG080408FS WS10PT ................................. B99
WNGG080408FS WS25PT ................................. B99
WNGG080408FS WU10HT ................................. B99
WNGX080712T02020 CW5025....................... B196
WNMA060408 TN20K ..................................... B147
WNMA060408 WK05CT .................................. B100
WNMA060408 WK20CT .................................. B100
WNMA060412 WK20CT .................................. B100
WNMA080408 TN20K ..................................... B147
WNMA080408 WK05CT .................................. B100
WNMA080408 WK20CT .................................. B100
WNMA080412 TN20K ..................................... B147
WNMA080412 WK05CT .................................. B100
WNMA080412 WK20CT .................................. B100
WNMA080416 WK05CT .................................. B100
WNMA080416 WK20CT .................................. B100
WNMG060404FF WK20CT .............................. B100
WNMG060404FF WM25CT.............................. B100
WNMG060404FF WP15CT .............................. B100
WNMG060404FW WP15CT ............................. B101
WNMG060404ML WK05CT ............................. B101
WNMG060404ML WK20CT ............................. B101
WNMG060404ML WP15CT ............................. B101
WNMG060404UF WM15CT ............................. B103
WNMG060404UF WM25CT ............................. B103
WNMG060404UF WS10PT .............................. B103
WNMG060404UM WM15CT ............................ B104
WNMG060404UM WM25CT ............................ B104
WNMG060404UM WM35CT ............................ B104
WNMG060404UM WS10PT ............................. B104
WNMG0604086P TN10P ................................. B149
WNMG0604086P TN15M ................................ B149
WNMG0604086P TN20P ................................. B149
WNMG0604086P TN30M ................................ B149
WNMG060408FF WK20CT .............................. B100
WNMG060408FF WP15CT .............................. B100
WNMG060408FW WP15CT ............................. B101
WNMG060408ML WK05CT ............................. B101
WNMG060408ML WK20CT ............................. B101
WNMG060408ML WP15CT ............................. B101
WNMG060408ML WP25CT ............................. B101
WNMG060408MS WS10PT ............................. B102
WNMG060408MS WS25PT ............................. B102
WNMG060408MS WU10HT ............................. B102
WNMG060408MW WP15CT ............................ B102
WNMG060408MW WP25CT ............................ B102
WNMG060408RH WM25CT ............................. B103
WNMG060408RH WP15CT .............................. B103
WNMG060408RH WP25CT .............................. B103
WNMG060408RH WP35CT .............................. B103
WNMG060408UF WM15CT ............................. B103
WNMG060408UF WM25CT ............................. B103
WNMG060408UF WS10PT .............................. B103
WNMG060408UM WM15CT ............................ B104
WNMG060408UM WM25CT ............................ B104
WNMG060408UM WM35CT ............................ B104
WNMG060408UM WS10PT ............................. B104
WNMG060408UR WK20CT .............................. B104
WNMG060408UR WM15CT ............................. B104
WNMG060408UR WM25CT ............................. B104
WNMG060408UR WP15CT .............................. B104
WNMG060408UR WP25CT .............................. B104
WNMG060408UR WP35CT .............................. B104
WNMG060408UR WS10PT .............................. B104
WNMG060408UR WS25PT .............................. B104
WNMG060412UM WM25CT ............................ B104
WNMG060412UM WM35CT ............................ B104
WNMG060412UR WK20CT .............................. B104
WNMG060412UR WP15CT .............................. B104
WNMG060412UR WP25CT .............................. B104
WNMG0804042P TN10P ................................. B148
WNMG0804042P TN10U ................................. B148
WNMG0804042P TN15M ................................ B148
WNMG0804042P TN15U ................................. B148
WNMG0804042P TN20K ................................. B148
WNMG0804042P TN20P ................................. B148
WNMG0804042P TN30M ................................ B148
WNMG0804044P TN15M ................................ B148
WNMG0804044P TN30M ................................ B148
WNMG080404FF WM25CT.............................. B100
WNMG080404FF WP15CT .............................. B100
WNMG080404FF WS10PT ............................... B100
WNMG080404FW WK05CT ............................. B101
WNMG080404FW WM15CT ............................ B101
WNMG080404FW WM25CT ............................ B101
WNMG080404FW WP15CT ............................. B101
WNMG080404ML WK05CT ............................. B101
WNMG080404ML WK20CT ............................. B101
WNMG080404ML WP15CT ............................. B101
WNMG080404ML WP25CT ............................. B101
WNMG080404MS WS10PT ............................. B102
WNMG080404MS WS25PT ............................. B102
WNMG080404MS WU10HT ............................. B102
WNMG080404UF WM15CT ............................. B103
WNMG080404UF WM25CT ............................. B103
WNMG080404UF WS10PT .............................. B103
WNMG080404UM WM15CT ............................ B104
WNMG080404UM WM25CT ............................ B104
WNMG080404UM WM35CT ............................ B104
WNMG0804082P TN10P ................................. B148
WNMG0804082P TN10U ................................. B148
WNMG0804082P TN15M ................................ B148
WNMG0804082P TN15U ................................. B148
WNMG0804082P TN20K ................................. B148
WNMG0804082P TN20P ................................. B148
WNMG0804084P TN10U ................................. B148
WNMG0804084P TN15M ................................ B148
WNMG0804084P TN20P ................................. B148
WNMG0804084P TN30M ................................ B148
WNMG0804086P TN10P ................................. B149
WNMG0804086P TN15M ................................ B149
WNMG0804086P TN20P ................................. B149
WNMG0804086P TN30M ................................ B149
WNMG0804086P TN30P ................................. B149
WNMG0804087N TN10P ................................. B149
WNMG0804087N TN20K ................................. B149
WNMG0804087N TN20P ................................. B149
WNMG0804087N TN30P ................................. B149
WNMG080408FF WM25CT.............................. B100
WNMG080408FF WP15CT .............................. B100
WNMG080408FF WS10PT ............................... B100
WNMG080408FW WK05CT ............................. B101
WNMG080408FW WM15CT ............................ B101
WNMG080408FW WM25CT ............................ B101
WNMG080408FW WP15CT ............................. B101
WNMG080408ML WK05CT ............................. B101
WNMG080408ML WK20CT ............................. B101
WNMG080408ML WP15CT ............................. B101
WNMG080408ML WP25CT ............................. B101
WNMG080408MR WM25CT ............................ B102
WNMG080408MR WM35CT ............................ B102
WNMG080408MR WP15CT ............................. B102
WNMG080408MR WP25CT ............................. B102
WNMG080408MR WP35CT ............................. B102
WNMG080408MS WS10PT ............................. B102
WNMG080408MS WS25PT ............................. B102
WNMG080408MS WU10HT ............................. B102
WNMG080408MW WK05CT ............................ B102
WNMG080408MW WM25CT ........................... B102
WNMG080408MW WP15CT ............................ B102
WNMG080408MW WP25CT ............................ B102
WNMG080408RH WK20CT .............................. B103
WNMG080408RH WM25CT ............................. B103
WNMG080408RH WP15CT .............................. B103
WNMG080408RH WP25CT .............................. B103
WNMG080408RH WP35CT .............................. B103
WNMG080408UF WM15CT ............................. B103
WNMG080408UF WM25CT ............................. B103
WNMG080408UF WS10PT .............................. B103
WNMG080408UM WM15CT ............................ B104
WNMG080408UM WM25CT ............................ B104
WNMG080408UM WM35CT ............................ B104
WNMG080408UM WP25CT ............................. B104
WNMG080408UR WK05CT .............................. B104
WNMG080408UR WK20CT .............................. B104
WNMG080408UR WM15CT ............................. B104
WNMG080408UR WM25CT ............................. B104
WNMG080408UR WM35CT ............................. B104
WNMG080408UR WP15CT .............................. B104
WNMG080408UR WP25CT .............................. B104
WNMG080408UR WP35CT .............................. B104
WNMG0804124P TN30M ................................ B148
WNMG0804126P TN10P ................................. B149
WNMG0804126P TN15M ................................ B149
WNMG0804126P TN20P ................................. B149
WNMG0804126P TN30M ................................ B149
WNMG0804126P TN30P ................................. B149
WNMG0804127N TN10P ................................. B149
WNMG0804127N TN20K ................................. B149
WNMG0804127N TN20P ................................. B149
WNMG0804127N TN30P ................................. B149
WNMG080412FW WK05CT ............................. B101
WNMG080412FW WM15CT ............................ B101
WNMG080412FW WM25CT ............................ B101
WNMG080412MR WM25CT ............................ B102
WNMG080412MR WM35CT ............................ B102
WNMG080412MR WP15CT ............................. B102
WNMG080412MR WP25CT ............................. B102
WNMG080412MR WP35CT ............................. B102
WNMG080412MW WK05CT ............................ B102
WNMG080412MW WM25CT ........................... B102
WNMG080412RH WK20CT .............................. B103
WNMG080412RH WM25CT ............................. B103
WNMG080412RH WP15CT .............................. B103
WNMG080412RH WP25CT .............................. B103
WNMG080412RH WP35CT .............................. B103
WNMG080412UF WM15CT ............................. B103
WNMG080412UF WM25CT ............................. B103
WNMG080412UF WS10PT .............................. B103
WNMG080412UM WM15CT ............................ B104
WNMG080412UM WM25CT ............................ B104
WNMG080412UM WM35CT ............................ B104
WNMG080412UM WP15CT ............................. B104
WNMG080412UM WS10PT ............................. B104
WNMG080412UR WK20CT .............................. B104
Catalogue No. Page(s) Catalogue No. Page(s) Catalogue No. Page(s)
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 144 11/2/15 10:34 AM
LViWID M 16 I d Z002 Z145 M i REBRANDO b 28 20153 09PM
Z145
widia.com
Index by Catalogue Number
Catalogue No. Page(s)
WNMG080412UR WM15CT ............................. B104
WNMG080412UR WM25CT ............................. B104
WNMG080412UR WM35CT ............................. B104
WNMG080412UR WP15CT .............................. B104
WNMG080412UR WP25CT .............................. B104
WNMG080412UR WP35CT .............................. B104
WNMG080412UR WS10PT .............................. B104
WNMG0804167N TN20K ................................. B149
WNMG0804167N TN20P ................................. B149
WNMG0804167N TN30P ................................. B149
WNMG080416MR WP15CT ............................. B102
WNMG080416MR WP25CT ............................. B102
WNMG080416RH WK20CT .............................. B103
WNMG080416RH WM25CT ............................. B103
WNMG080416RH WP15CT .............................. B103
WNMG080416RH WP25CT .............................. B103
WNMG080416RH WP35CT .............................. B103
WNMG080416UM WM25CT ............................ B104
WNMG080416UM WM35CT ............................ B104
WNMG080416UR WK20CT .............................. B104
WNMG080416UR WM25CT ............................. B104
WNMG080416UR WM35CT ............................. B104
WNMG080416UR WP15CT .............................. B104
WNMG080416UR WP25CT .............................. B104
WNMG080416UR WP35CT .............................. B104
WNMP080408 WS10PT................................... B105
WNMP080412 WS10PT................................... B105
WOEJ080412SRMH TN6520 ...............................M7
WOEJ080412SRMH TN6525 ...............................M7
WOEJ080412SRMH TN7535 ...............................M7
WOEJ080412SRMH WK15CM .............................M7
WOEJ080412SRMH WP25PM .............................M7
WOEJ080412SRMH WP40PM .............................M7
WOEJ080412SRMM TN6525 ..............................M7
WOEJ080412SRMM TN7535 ..............................M7
WOEJ080412SRMM WP25PM.............................M7
WOEJ080412SRMM WP40PM.............................M7
WOEJ080412SRMM WS30PM.............................M7
WOEJ120712SRMH WK15CM ...........................M13
WOEJ120712SRMH WP20CM ...........................M13
WOEJ120712SRMH WP25PM ...........................M13
WOEJ120712SRMH WP35CM ...........................M13
WOEJ120712SRMH WP40PM ...........................M13
WOEJ120712SRMH WU35PM ...........................M13
WOEJ120712SRMM WP20CM ..........................M13
WOEJ120712SRMM WP25PM...........................M13
WOEJ120712SRMM WP35CM ..........................M13
WOEJ120712SRMM WP40PM...........................M13
WOEJ120712SRMM WS30PM...........................M13
WOEJ120712SRMM WU35PM ..........................M13
WOEJ120712SRMR WP25PM ...........................M14
WOEJ120712SRMR WP40PM ...........................M14
WPGT040202UF CG5 ........................................ D54
WPHT040201 CG5 ............................................ D54
WPHT040204 CG5 ............................................ D54
WPHTS30101 CG5 ............................................ D54
WPHTS30102 CG5 ............................................ D54
WPHTS30102 CM1............................................ D54
WPHTS30104 CG5 ............................................ D54
WPHTS30104 CM1............................................ D54
WPMT040204FP WP25CT ............................... B105
WPMT040204LF CG55 ...................................... D54
WPMT06T304FP WM15CT .............................. B105
WPMT06T304FP WM25CT .............................. B105
WPMT06T304FP WP15CT ............................... B105
WPMT06T304LF CG55 ...................................... D54
WPMT06T308FP WM25CT .............................. B105
WPMT06T308FP WP15CT ............................... B105
WPMT06T308FP WP25CT ............................... B105
WPMT06T308LF CG55 ...................................... D54
WPMTS3T104FP WM25CT .............................. B105
WPMTS3T104FP WP25CT ............................... B105
WPMTS3T104LF CG55 ...................................... D54
WSSEM02502RH W ........................................... H65
WSSEM03203RH W ........................................... H65
WSSEM04004RH W ........................................... H65
WSSEM05005RH W ........................................... H65
XDCT110404PDERML WP25PM ...........................J9
XDCT110404PDERML WP35CM ...........................J9
XDCT110404PDERML WP40PM ...........................J9
XDCT110404PDFRALP WN10HM ........................J11
XDCT110404PDFRALP WN25PM ........................J11
XDCT110408PDERML WK15CM ...........................J9
XDCT110408PDERML WP25PM ...........................J9
XDCT110408PDERML WP35CM ...........................J9
XDCT110408PDERML WP40PM ...........................J9
XDCT110408PDERML WS30PM ...........................J9
XDCT110408PDERML WU35PM ...........................J9
XDCT110408PDFRALP WN10HM ........................J11
XDCT110408PDFRALP WN25PM ........................J11
XDCT170404PEERML WP25PM ..........................J25
XDCT170404PEFRALP WN10HM ........................J26
XDCT170404PEFRALP WN25PM ........................J26
XDCT170408PEERML WP25PM ..........................J25
XDCT170408PEERML WP35CM .........................J25
XDCT170408PEERML WP40PM ..........................J25
XDCT170408PEFRALP WN10HM ........................J26
XDCT170408PEFRALP WN25PM ........................J26
XDCT170412PEERML WP25PM ..........................J25
XDCT170412PEERML WP35CM .........................J25
XDCT170412PEERML WP40PM ..........................J25
XDCT170412PEFRALP WN10HM ........................J26
XDCT170412PEFRALP WN25PM ........................J26
XDCT170416PEERML WP25PM ..........................J25
XDCT170416PEFRALP WN25PM ........................J26
XDCT170420PEERML WP25PM ..........................J25
XDCT170420PEFRALP WN25PM ........................J26
XDCT170424PEERML WP25PM ..........................J25
XDCT170424PEFRALP WN25PM ........................J26
XDCT170432PEERML WP25PM ..........................J25
XDCT170432PEFRALP WN25PM ........................J26
XDCT170440PEERML WP25PM ..........................J25
XDCT170440PEFRALP WN25PM ........................J26
XDCW110404PDFRPCD WDN10U .......................J11
XDCW110408PDFRPCD WDN10U .......................J11
XDPT110404PDSRMM WK15CM ........................J10
XDPT110404PDSRMM WP25PM ........................J10
XDPT110404PDSRMM WP35CM ........................J10
XDPT110404PDSRMM WP40PM ........................J10
XDPT110408PDSRMH WK15CM .........................J10
XDPT110408PDSRMH WP35CM .........................J10
XDPT110408PDSRMH WP40PM .........................J10
XDPT110408PDSRMH WU35PM .........................J10
XDPT110408PDSRMM WK15CM ........................J10
XDPT110408PDSRMM WP25PM ........................J10
XDPT110408PDSRMM WP35CM ........................J10
XDPT110408PDSRMM WP40PM ........................J10
XDPT110408PDSRMM WS30PM ........................J10
XDPT110408PDSRMM WU35PM ........................J10
XDPT110412PDSRMH WK15CM .........................J10
XDPT110412PDSRMH WP35CM .........................J10
XDPT110412PDSRMH WP40PM .........................J10
XDPT110412PDSRMM WK15CM ........................J10
XDPT110412PDSRMM WP25PM ........................J10
XDPT110412PDSRMM WP35CM ........................J10
XDPT110412PDSRMM WP40PM ........................J10
XDPT110412PDSRMM WU35PM ........................J10
XDPT110416PDSRMH WK15CM .........................J10
XDPT110416PDSRMH WP35CM .........................J10
XDPT110416PDSRMH WP40PM .........................J10
XDPT110416PDSRMM WK15CM ........................J10
XDPT110416PDSRMM WP25PM ........................J10
XDPT110416PDSRMM WP35CM ........................J10
XDPT110416PDSRMM WP40PM ........................J10
XDPT110420PDSRMM WP25PM ........................J10
XDPT110420PDSRMM WP35CM ........................J10
XDPT110420PDSRMM WP40PM ........................J10
XDPT110424PDSRMM WP25PM ........................J10
XDPT110424PDSRMM WP40PM ........................J10
XDPT110431PDSRMM WK15CM ........................J10
XDPT110431PDSRMM WP25PM ........................J10
XDPT110431PDSRMM WP35CM ........................J10
XDPT110431PDSRMM WP40PM ........................J10
XDPT110431PDSRMM WS30PM ........................J10
XDPT170404PESRMM WP40PM.........................J27
XDPT170404PESRMM WU35PM ........................J27
XDPT170408PESRMH WK15CM .........................J27
XDPT170408PESRMH WP35CM .........................J27
XDPT170408PESRMH WP40PM .........................J27
XDPT170408PESRMM WK15CM ........................J27
XDPT170408PESRMM WP25PM.........................J27
XDPT170408PESRMM WP35CM ........................J27
XDPT170408PESRMM WP40PM.........................J27
XDPT170408PESRMM WU35PM ........................J27
XDPT170412PESRMH WK15CM .........................J27
XDPT170412PESRMH WP35CM .........................J27
XDPT170412PESRMH WP40PM .........................J27
XDPT170412PESRMM WK15CM ........................J27
XDPT170412PESRMM WP25PM.........................J27
XDPT170412PESRMM WP35CM ........................J27
XDPT170412PESRMM WP40PM.........................J27
XDPT170412PESRMM WU35PM ........................J27
XDPT170416PESRMM WK15CM ........................J27
XDPT170416PESRMM WP25PM.........................J27
XDPT170416PESRMM WP35CM ........................J27
XDPT170416PESRMM WP40PM.........................J27
XDPT170420PESRMM WP25PM.........................J27
XDPT170420PESRMM WP35CM ........................J27
XDPT170420PESRMM WP40PM.........................J27
XDPT170424PESRMM WP25PM.........................J27
XDPT170424PESRMM WP40PM.........................J27
XDPT170432PESRMM WP25PM.........................J27
XDPT170432PESRMM WP35CM ........................J27
XDPT170432PESRMM WP40PM.........................J27
XDPT170440PESRMM WP25PM.........................J27
XDPT170440PESRMM WP40PM.........................J27
XNGJ0704ANENLD3W TN6510.......................... H17
XNGJ0704ANENLD3W TN6520.......................... H17
XNGJ0704ANENLD3W TN6525.......................... H17
XNGJ0704ANENLD3W TN6540.......................... H17
XNGJ0704ANENLD3W WK15CM ....................... H17
XNGJ0704ANENLD3W WP25PM ........................ H17
XNGJ0704ANENLD3W WP40PM ........................ H17
XNGJ0704ANFNLDJ3W THM-U .......................... H17
XNGJ0704ANFNLDJ3W TN6501 ........................ H17
XNGJ0905ANFNLDJ3W THM-U .......................... H35
XNGJ0905ANFNLDJ3W TN6501 ........................ H35
XNGJ0905ANSNGD3W TN6510 ......................... H35
XNGJ0905ANSNGD3W TN6520 ......................... H35
XNGJ0905ANSNGD3W TN6525 ......................... H35
XNGJ0905ANSNGD3W TN6540 ......................... H35
XNGJ0905ANSNGD3W WK15CM ....................... H35
XNGJ0905ANSNGD3W WP25PM ....................... H35
XNGJ0905ANSNGD3W WP40PM ....................... H35
XNGU15T604ERML WP25PM .............................J36
XNGU15T604ERML WP40PM .............................J36
XNGU15T604ERML WU35PM .............................J36
XNGU15T604SRMM WP25PM ............................J37
XNGU15T604SRMM WP40PM ............................J37
XNGU15T604SRMM WU35PM ............................J37
XNGU15T608ERML WP25PM .............................J36
XNGU15T608ERML WP40PM .............................J36
XNGU15T608ERML WU35PM .............................J36
XNGU15T608SRMH WK15CM .............................J37
XNGU15T608SRMH WK15PM .............................J37
XNGU15T608SRMH WP25PM .............................J37
XNGU15T608SRMH WP35CM .............................J37
XNGU15T608SRMH WP40PM .............................J37
XNGU15T608SRMH WU35PM .............................J37
XNGU15T608SRMM WP25PM ............................J37
XNGU15T608SRMM WP40PM ............................J37
XNGU15T608SRMM WU35PM ............................J37
XNGU15T616SRMH WK15CM .............................J37
XNGU15T616SRMH WK15PM .............................J37
XNGU15T616SRMH WP25PM .............................J37
XNGU15T616SRMH WP35CM .............................J37
XNKT1205AZER11 THM ..................................... H55
XNKT1205AZER11 TN7525 ............................... H55
XNKT1205AZER11 TTI25 ................................... H55
XNKT1205AZER11 WK15CM ............................. H55
XNKT1205AZTR12 TN7525 ............................... H55
XNKT1205AZTR12 TTI25 ................................... H55
XNPU15T608ERML WP25PM ..............................J37
XNPU15T608ERML WP40PM ..............................J37
XNPU15T608ERML WU35PM ..............................J37
XNPU15T608SRMM WK15CM ............................J37
XNPU15T608SRMM WK15PM ............................J37
XNPU15T608SRMM WP25PM ............................J37
XNPU15T608SRMM WP35CM ............................J37
XNPU15T608SRMM WP40PM ............................J37
XNPU15T608SRMM WU35PM ............................J37
XNPU15T612SRMM WK15CM ............................J37
XNPU15T612SRMM WK15PM ............................J37
XNPU15T612SRMM WP25PM ............................J37
XNPU15T612SRMM WP35CM ............................J37
XNPU15T612SRMM WP40PM ............................J37
XNPU15T612SRMM WU35PM ............................J37
XNPU15T616SRMM WK15CM ............................J37
XNPU15T616SRMM WK15PM ............................J37
XNPU15T616SRMM WP25PM ............................J37
XNPU15T616SRMM WP35CM ............................J37
XNPU15T616SRMM WP40PM ............................J37
XNPU15T616SRMM WU35PM ............................J37
Catalogue No. Page(s) Catalogue No. Page(s) Catalogue No. Page(s)
Index
WID_Master16_Index_Z002-Z145_Metric_REBRAND.indd 145 11/2/15 10:34 AM
Z146
LViWID M 16 ORDERING INFO Z146 Z147 M i REBRAND N b 13 2015 9 30 AM
widia.com
Global Contacts
Visit widia.com for additional contact information for locations.
North America
United States
General Sales: +1 800 979 4342
w-na.service@widia.com
Technical Support: +1 888 539 5145
na.techsupport@widia.com
Canada
General Sales: +1 800 979 4342
Technical Support: +1 888 539 5145
na.techsupport@widia.com
Mexico
General Sales: 001 888 402 4963
Technical Support: 888 539 5145
na.techsupport@widia.com
Central/South America
Argentina
General Sales: +54 11 4719 0700
w-ar.service@widia.com
Brazil
General Sales: +55 19 3936 9200
w-br.service@widia.com
Chile
General Sales: +56 2 2641177
w-cl.service@widia.com
El Salvador
General Sales: +503 2218 8096
prometca@salnet.net
Venezuela
General Sales: +58 305 595 5175
paxi@bellsouth.net
Africa
Egypt
General Sales: +20 2 263 9828
w-uk.service@widia.com
South Africa
General Sales: +27 11 748 9300
w-za.service@widia.com
Technical Support: 0800 981644
Europe
Austria
General Sales: +43 2236 379898
Technical Support: 0800 291630
w-at.service@widia.com
Belgium
General Sales: 0800 81372
Technical Support: 0800 80410
w-be.service@widia.com
Czech Republic
General Sales: 800 900 840
w-cz.service@widia.com
Denmark
Technical Support: +45 808 89295
na.techsupport@widia.com
Finland
Technical Support: 0800 919413
na.techsupport@widia.com
France
General Sales: +33 1 60 12 81 00
Technical Support: +33 080 5540 379
w-fr.service@widia.com
Germany
General Sales: 0800 7242999
Technical Support: 0800 1015774
w-de.service@widia.com
Great Britain
General Sales: 0800 072 4528
Technical Support: 0800 028 2996
w-uk.service@widia.com
Hungary
General Sales: +36 96 618 158
w-hu.service@widia.com
Italy
General Sales: +39 02 895 961
Technical Support: 800 916568
w-it.service@widia.com
Luxemborg
General Sales: +32 4 248 48 48
w-be.service@widia.com
Netherlands
General Sales: 0800 3500103
Technical Support: 0800 0201131
w-nl.service@widia.com
Norway
Technical Support: 800 10081
na.techsupport@widia.com
Poland
General Sales: 008004411941
w-pl.service@widia.com
Technical Support: 00800 4411943
Portugal
General Sales: +351 22 4119 400
w-pt.service@widia.com
Russia
General Sales: +7 81080021431044
w-ru.service@widia.com
Technical Support:
Landline: +7 8800 5556395
Cell Phone: +7 8005556395
eu.techsupport@widia.com
Slovakia
General Sales: 0800 044053
w-sk.service@widia.com
Spain
General Sales: +34 93706 06 10
w-es.service@widia.com
Sweden
Technical Support: +46 020798794
na.techsupport@widia.com
Turkey
General Sales: +90 216 574 4780
w-tr.service@widia.com
Ukraine
General Sales: +380 0048 616656573
w-ru.service@widia.com
Technical Support: 0800502665
eu.techsupport@widia.com
WID_Master16_ORDERING INFO_Z146_Z147_Metric_REBRAND.indd 146 11/13/15 9:38 AM
LViWID M 16 ORDERINGINFO Z146 Z147 M i REBRANDN b 13 20159 30AM
widia.com Z147
Global Contacts
*Vietnam, Philippines, and Indonesia individuals
should contact the Singapore office.
*Includes Bahrain, Dubai, and Kuwait.
East/Asia Pacific
Australia
General Sales: +61 1300 094 342 (Local)
+61 7 3801 5844 (Overseas)
w-au.service@widia.com
China
General Sales: +86 400 889 2136
Technical Support: +86 400 889 2237
w-cn.service@widia.com
India
General Sales: +91 80 2219 8215
Technical Support: 1800 103 5227
in.techsupport@widia.com
Israel
General Sales: +972 3 5562211
w-il.sales@widia.com
Japan
General Sales: +81 3 3820 2855
w-jp.service@widia.com
Korea
General Sales: +82 2 2109 5505
w-kr-service@widia.com
Middle East*
General Sales: 0800 072 4528
Technical Support: 0800 028 2996
w-uk.service@widia.com
Malaysia
General Sales: +60 03-5569 9080
w-my.service@widia.com
New Zealand
General Sales: 0800 536 626 (Local)
+61 1300 094 342 (Overseas)
w-nz.service@widia.com
Singapore*
General Sales: +65 65724466
w-sg.service@widia.com
Taiwan
General Sales: +886 4 2350 1920
w-tw.service@widia.com
Thailand
General Sales: +66 2 642 3455
w-th.service@widia.com
Z147
WID_Master16_ORDERING INFO_Z146_Z147_Metric_REBRAND.indd 147 11/13/15 9:38 AM
LViWID M 16 ORDERING INFO Z148 Z151 M i REBRAND N b 13 2015 9 32 AM
Z148 widia.com
Informational Icons Guide
Plunge
Milling Ramping Blank Slotting: Ball Nose Slotting: Ball Nose
with AP Dimension
Slotting:
Square End
Slotting: Square
End with AP
Dimension
Trochoidal Milling Trochoidal Milling:
Ball Nose
Side Milling/
Shoulder Milling:
Ball Nose
Side Milling/Shoulder
Milling: Ball Nose with
AE/AP Dimension
Side Milling/Shoulder
Milling: Square End
Side Milling/Shoulder
Milling: Square
End with AE/AP
Dimension
Chamfer Milling
Chamfer Milling:
Chamfer Milling with
AE/AP Dimension
3D Proling
PCD Tool HSS-PM Material HSS-M42 Corner Style:
Ball Nose
Corner Style:
Corner Chamfer
Corner Style:
Corner Radius
Corner Style:
Square End Corner Style: Torus Helix Angle: 0° Helix Angle: 15°
Countersinking Face Milling Helical Milling Plunge Milling Ramping Blank
Slotting: Ball Nose Slotting: Side Milling
Slotting: Side
Milling with AE/AP
Dimensions
Slotting: Square End Slotting: T
Side Milling/Shoulder
Milling: Ball Nose
Side Milling/Shoulder
Milling: Square End
Side Milling: Square
End with AE/AP
Dimensions
Chamfer Milling Side Milling:
Roughing
3D Proling PCD Tool Pocketing Plain Shank Shell Mill Shank
Weldon
®
Shank Weldon Shank:
2 Flat Screw-On Shank Shank
Through Coolant:
Radial: Indexable
Milling
Shank: KM-TS™
(ISO 26622) ISO: 26622 Through Coolant:
100 bar
Through Coolant:
100 bar Turning
Cut-off I.D. Turning I.D. Chamfering I.D. Grooving I.D. Face Grooving
I.D. Internal
Threading Proling Facing Face Grooving Back Boring
Threading Grooving
Turning Icons
Solid End Milling Icons
Indexable Milling Icons
(continued)
WID_Master16_ORDERING INFO_Z148_Z151_Metric_REBRAND.indd 148 11/13/15 9:39 AM
LViWID M 16 ORDERINGINFO Z148 Z151 M i REBRANDN b 13 20159 32AM
Z149
widia.com
Informational Icons Guide
Countersinking/
Stroke Chamfering Drilling Chain Drilling Drilling:
Cross Hole
Drilling:
Half Cylinder
Drilling: Corner
Drilling 45°
Drilling:
Inclined Entry
Drilling:
Inclined Exit
Drilling:
Exit Offset
Drilling:
Stacked Plates
Drilling: Convex Drilled Hole Reaming: Through
Hole Reaming: Blind Hole Reaming:
Through Cross
Reaming: Blind and
Cross Holes Drilling Depth: 3x Drilling Depth: 5x Drilling Depth: 8x Drilling Depth:
12x
Shank: Cylindrical
Plain )h6
Shank: Cylindrical
Whistle Notch 2° Flat Shank Shank: Cylindrical
with at KM
™
Shank
Helix Angle 0° Helix Angle 30° DIN Number 212 DIN Number 6535 DIN Number 6537
Through Coolant:
Radial: Drilling
Through Coolant:
Radial: Drilling
Through Coolant:
Radial: Indexable
Drilling
Flood Coolant:
Reaming
Through Coolant:
MQL (Minimum
Quantity Lubricant):
Drilling
Axial: Drilling Through Coolant:
Axial Reaming
Tool Dimensions:
2-Flute/2-Margin/
Coolant
Tool Dimensions:
2-Flute/4-Margin/
Coolant
Helix Angle: 20° Helix Angle:
25°
Helix Angle:
30° Helix Angle: 35° Helix Angle: 37°
Helix Angle: 38° Helix Angle: 40° Helix Angle:
45°
Helix Angle:
50°
Helix Angle:
60°
Helix Angle: 43° DIN 6528 DIN 844 DIN 1835B DIN 6527
Through Coolant:
Radial: Drilling
Through Coolant:
Axial: Solid End
Mill
Tool Dimensions:
Flute Conguration: X
(Variable)
Tool Dimensions:
Flute Conguration: 1
Tool Dimensions:
Flute Conguration: 2
Tool Dimensions:
Flute Conguration: 3
Tool Dimensions:
Flute Conguration: 4
Tool Dimensions:
Flute Conguration: 5
Tool Dimensions:
Flute Conguration: 6
Tool Dimensions:
Flute Conguration: 7
Manufacturer’s
Specs: JIS
Holemaking Icons
Solid End Milling Icons
(continued)
(continued)
WID_Master16_ORDERING INFO_Z148_Z151_Metric_REBRAND.indd 149 11/13/15 9:39 AM
LViWID M 16 ORDERING INFO Z148 Z151 M i REBRAND N b 13 2015 9 32 AM
Z150 widia.com
Tapping:
Blind Hole
Threading:
Through Hole
Threading:
Blind Hole
HSS-E: High-Speed
Steel with Cobalt Alloy
for Materials with
Higher Hardness
HSS-E-PM:
High-Speed Steel
with Cobalt Alloy for
Materials with Higher
Hardness (PM = Power
Metal Steel)
HM: (Carbide)
Square Shank Chamfer Form C
(2–3)
Chamfer Form D
(3.5–5)
Chamfer Form E
(1.5–2)
3–5
Plug Chamfer (3–5) Tapping Helix:
Angle: 0°
Tapping Helix:
Angle: 10°
Tapping Helix:
Angle: L8°
Tapping Helix:
Angle: 15°
Tapping Helix:
Angle: L15°
Tapping Helix:
Angle: 25°
Tapping Helix:
Angle: 30°
Tapping Helix:
Angle: 42°
Tapping Helix:
Angle: 45°
DIN Number 371 DIN Number 374 DIN Number 2174 DIN Number 376 Tapping: Through
Coolant
Flood Coolant:
Tapping
Through Coolant:
Axial: Tapping ISO 2 Manufacturer’s
Specs: JIS Class of Fit: 2B
Class of Fit: 3B Class of Fit: 6H Class of Fit: 6HX Class of Fit: 6G ANSI
Unied Course
Thread: J Prole
Unied Fine Thread:
J Prole
Unied Fine
Thread
Unied Course
Thread
ISO Metric
Coarse Thread
ISO Metric
Fine Thread
Tapping Icons
DIN — German Institute for Standardisation
(continued)
Informational Icons Guide
WID_Master16_ORDERING INFO_Z148_Z151_Metric_REBRAND.indd 150 11/13/15 9:39 AM
LViWID M 16 ORDERINGINFO Z148 Z151 M i REBRANDN b 13 20159 32AM
Z151
widia.com
material
group description content
tensile
strength
RM (MPa)*
hardness
(HB)
hardness
(HRC)
material
number
P0
Low-Carbon Steels, Long Chipping C <0,25% <530 <125 – –
P1
Low-Carbon Steels, Short Chipping, Free Machining C <0,25% <530 <125 – C15, Ck22, ST37-2, S235JR, 9SMnPb28, GS38
P2
Medium- and High-Carbon Steels C >0,25% >530 <220 <25 ST52, S355JR, C35, GS60, Cf53
P3
Alloy Steels and Tool Steels C >0,25% 600–850 <330 <35 16MnCr5, Ck45, 21CrMoV5-7, 38SMn28
P4
Alloy Steels and Tool Steels C >0,25% 850–1400 340–450 35–48 100Cr6, 30CrNiMo8, 42CrMo4, C70W2, S6525, X120Mn12
P5
Ferritic, Martensitic, and PH Stainless Steels – 600–900 <330 <35 100Cr6, 30CrNiMo8, 42CrMo4, C70W2, S6525, X120Mn12
P6
High-Strength Ferritic, Martensitic,
and PH Stainless Steels – 900–1350 350–450 35–48 X102CrMo17, G-X120Cr29
M1
Austenitic Stainless Steel – <600 130–200 – X5CrNi 18 10, X2CrNiMo 17 13 2, G-X25CrNiSi18 9,
X15CrNiSi 20 12
M2
High-Strength Austenitic Stainless
and Cast Stainless Steels – 600–800 150–230 <25 X2CrNiMo 13 4, X5NiCr 32 21, X5CrNiNb 18 10,
G-X15CrNi 25-20
M3
Duplex Stainless Steel – <800 135–275 <30 X8CrNiMo27 5, X2CrNiMoN22 5 3, X20CrNiSi25 4,
G-X40CrNiSi27 4
K1
Grey Cast Iron – 125–500 120–290 <32 GG15, GG25, GG30, GG40, GTW40
K2
Low- and Medium-Strength Ductile Irons (Nodular
Irons) and Compacted Graphite Irons (CGI) – <600 130–260 <28 GGG40, GTS35
K3
High-Strength Ductile Irons and Austempered Ductile
Iron (ADI) – >600 180–350 <43 GGG60, GTW55, GTS65
N1
Wrought Aluminium – – – – AIMg1, AI99.5, AICuMg1, AICuBiPb, AIMgSi1, ALMgSiPb
N2
Low-Silicon Aluminium Alloys and Magnesium Alloys Si <12,2% – – – GAISiCu4, GDAISi10Mg
N3
High-Silicon Aluminium Alloys and Magnesium Alloys Si >12,2% – – – G-ALSi12, G-AlSi17Cu4, G-AISi21CuNiMg
N4
Copper-, Brass-, Zinc-Based on Machinability Index
Range of 70–100 – – – – CuZn40, Ms60, G-CuSn5ZnPb, CuZn37, CuSi3Mn
N5
Nylon, Plastics, Rubbers, Phenolics, Resins, Fibreglass – – – – Lexan®, Hostalen™, Polystyrol, Makrolon®
N6
Carbon, Graphite Composites, CFRP – – – – CFK, GFK
N7
Metal Matrix Composites (MMC) – – – – –
S1
Iron-Based, Heat-Resistant Alloys – 500–1200 160–260 25–48 X1NiCrMoCu32 28 7, X12NiCrSi36 16, X5NiCrAITi31 20,
X40CoCrNi20 20
S2
Cobalt-Based, Heat-Resistant Alloys – 1000–1450 250–450 25–48 Haynes® 188, Stellite® 6,21,31
S3
Nickel-Based, Heat-Resistant Alloys – 600–1700 160–450 <48 INCONEL® 690, INCONEL 625, Hastelloy®, NIMONIC® 75
S4
Titanium and Titanium Alloys – 900–1600 300–400 33–48 Ti1, TiAI5Sn2, TiAI6V4, TiAI4Mo4Sn2
H1
Hardened Materials – – – 44–48 GX260NiCr42, GX330NiCr42, GX300CrNiSi952,
GX300CrMo153, Hardox
®
400
H2
Hardened Materials – – – 48–55 –
H3
Hardened Materials – – – 56–60 –
H4
Hardened Materials – – – >60 –
Material Overview • DIN
PSteel
MStainless Steel
KCast Iron
NNon-Ferrous
SHigh-Temp Alloys
HHardened Materials
WID_Master16_ORDERING INFO_Z148_Z151_Metric_REBRAND.indd 151 11/13/15 9:39 AM
