Представляем список номенклатуры производителя Guhring. Воспользуйтесь поиском по странице, чтобы найти нужные позиции. Отправляйте заявку на любые контактные данные.
Данный инструмент доступен под заказ или из наличия со сроками поставки от 1 дня:
| A63.182.16.8 Power Mini Shrink Chuck D-16 mm oversize HSK-A63 |
| A63.186.03.8 Power Mini Shrink Chuck D-3 mm ZG200 HSK-A63 |
| A63.186.04.8 Power Mini Shrink Chuck D-4 mm ZG200 HSK-A63 |
| A63.186.05.8 Power Mini Shrink Chuck D-5 mm ZG200 HSK-A63 |
| A63.186.06.8 Power Mini Shrink Chuck D-6 mm ZG200 HSK-A63 |
| A63.186.08.8 Power Mini Shrink Chuck D-8 mm ZG200 HSK-A63 |
| A63.186.10.8 Power Mini Shrink Chuck D-10 mm ZG200 HSK-A63 |
| A63.186.12.8 Power Mini Shrink Chuck D-12 mm ZG200 HSK-A63 |
| A63.186.16.8 Power Mini Shrink Chuck D-16 mm ZG200 HSK-A63 |
| A63/80.050.22 Face Mill Arbor D-22 mm short HSK-A63/80 |
| A63/80.050.27 Face Mill Arbor D-27 mm short HSK-A63/80 |
| A63/80.025.16.3 Power Collet Chuck ER 16 ultra short HSK-A63/80 |
| A63/80.025.25.3 Power Collet Chuck ER 25 ultra short HSK-A63/80 |
| A63/80.025.32.3 Power Collet Chuck ER 32 ultra short HSK-A63/80 |
| A63/80.024.16.3 Power Collet Chuck ER 16 ZG130 HSK-A63/80 |
| A63/80.024.25.3 Power Collet Chuck ER 25 ZG130 HSK-A63/80 |
| A63/80.024.32.3 Power Collet Chuck ER 32 ZG130 HSK-A63/80 |
| A63/80.144.06 Shrink Fit Chuck Standard D-6 mm ZG130 HSK-A63/80 |
| A63/80.144.08 Shrink Fit Chuck Standard D-8 mm ZG130 HSK-A63/80 |
| A63/80.144.10 Shrink Fit Chuck Standard D-10 mm ZG130 HSK-A63/80 |
| A63/80.144.12 Shrink Fit Chuck Standard D-12 mm ZG130 HSK-A63/80 |
| A63/80.144.14 Shrink Fit Chuck Standard D-14 mm ZG130 HSK-A63/80 |
| A63/80.144.16 Shrink Fit Chuck Standard D-16 mm ZG130 HSK-A63/80 |
| A63/80.144.18 Shrink Fit Chuck Standard D-18 mm ZG130 HSK-A63/80 |
| A63/80.145.10.5 Power Shrink Chuck D-10 mm uk-uk HSK-A63/80 |
| A63/80.145.20.5 Power Shrink Chuck D-20 mm uk-uk HSK-A63/80 |
| A63/80.145.20.57 Power Shrink Chuck D-20 mm with Safe-Lock uk-uk HSK-A63/80 |
| A63/80.145.25.5 Power Shrink Chuck D-25 mm uk-uk HSK-A63/80 |
| A63/80.145.25.57 Power Shrink Chuck D-25 mm with Safe-Lock uk-uk HSK-A63/80 |
| A63/80.145.06.3 Power Shrink Chuck D-6 mm ultra short HSK-A63/80 |
| A63/80.145.08.3 Power Shrink Chuck D-8 mm ultra short HSK-A63/80 |
| A63/80.145.08.37 Power Shrink Chuck D-8 mm mit Safe-Lock ultra short HSK-A63/80 |
| A63/80.145.10.3 Power Shrink Chuck D-10 mm ultra short HSK-A63/80 |
| A63/80.145.10.37 Power Shrink Chuck D-10 mm mit Safe-Lock ultra short HSK-A63/80 |
| A63/80.145.12.3 Power Shrink Chuck D-12 mm ultra short HSK-A63/80 |
| A63/80.145.12.37 Power Shrink Chuck D-12 mm with Safe-Lock ultra short HSK-A63/80 |
| A63/80.145.16.3 Power Shrink Chuck D-16 mm ultra short HSK-A63/80 |
| A63/80.145.16.37 Power Shrink Chuck D-16 mm with Safe-Lock ultra short HSK-A63/80 |
| A63/80.145.20.3 Power Shrink Chuck D-20 mm ultra short HSK-A63/80 |
| A63/80.145.20.37 Power Shrink Chuck D-20 mm with Safe-Lock ultra short HSK-A63/80 |
| A63/80.145.25.3 Power Shrink Chuck D-25 mm ultra short HSK-A63/80 |
| A63/80.145.25.37 Power Shrink Chuck D-25 mm with Safe-Lock ultra short HSK-A63/80 |
| A63/80.140.25.3 Power Shrink Chuck D-25 mm short HSK-A63/80 |
| A63/80.140.25.37 Power Shrink Chuck D-25 mm with Safe-Lock short HSK-A63/80 |
| A63/80.140.32.3 Power Shrink Chuck D-32 mm short HSK-A63/80 |
| A63/80.144.06.3 Power Shrink Chuck D-6 mm ZG130 HSK-A63/80 |
| A63/80.144.08.3 Power Shrink Chuck D-8 mm ZG130 HSK-A63/80 |
| A63/80.144.10.3 Power Shrink Chuck D-10 mm ZG130 HSK-A63/80 |
| A63/80.144.12.3 Power Shrink Chuck D-12 mm ZG130 HSK-A63/80 |
| A63/80.144.12.37 Power Shrink Chuck D-12 mm with Safe-Lock ZG130 HSK-A63/80 |
| A63/80.144.16.3 Power Shrink Chuck D-16 mm ZG130 HSK-A63/80 |
| A63/80.144.16.37 Power Shrink Chuck D-16 mm with Safe-Lock ZG130 HSK-A63/80 |
| A63/80.182.03.8 Power Mini Shrink Chuck D-3 mm oversized HSK-A63/80 |
| A63/80.182.04.8 Power Mini Shrink Chuck D-4 mm oversized HSK-A63/80 |
| A63/80.182.05.8 Power Mini Shrink Chuck D-5 mm oversized HSK-A63/80 |
| A63/80.182.06.8 Power Mini Shrink Chuck D-6 mm oversized HSK-A63/80 |
| A63/80.182.08.8 Power Mini Shrink Chuck D-8 mm oversized HSK-A63/80 |
| A63/80.182.10.8 Power Mini Shrink Chuck D-10 mm oversized HSK-A63/80 |
| A63/80.182.12.8 Power Mini Shrink Chuck D-12 mm oversized HSK-A63/80 |
| A80.000.06 Weldon Tool Holder D-6 mm short HSK-A80 |
| A80.000.10 Weldon Tool Holder D-10 mm short HSK-A80 |
| A80.000.16 Weldon Tool Holder D-16 mm short HSK-A80 |
| A80.000.20 Weldon Tool Holder D-20 mm short HSK-A80 |
| A80.000.25 Weldon Tool Holder D-25 mm short HSK-A80 |
| A80.000.32 Weldon Tool Holder D-32 mm short HSK-A80 |
| A80.020.16 Collet Chuck ER 16 short HSK-A80 |
| A80.020.25 Collet Chuck ER 25 short HSK-A80 |
| A80.020.32 Collet Chuck ER 32 short HSK-A80 |
| A80.140.06 Shrink Fit Chuck Standard D-6 mm short HSK-A80 |
| A80.140.08 Shrink Fit Chuck Standard D-8 mm short HSK-A80 |
| A80.140.10 Shrink Fit Chuck Standard D-10 mm short HSK-A80 |
| A80.140.12 Shrink Fit Chuck Standard D-12 mm short HSK-A80 |
| A80.140.14 Shrink Fit Chuck Standard D-14 mm short HSK-A80 |
| A80.140.16 Shrink Fit Chuck Standard D-16 mm short HSK-A80 |
| A80.140.18 Shrink Fit Chuck Standard D-18 mm short HSK-A80 |
| A80.140.20 Shrink Fit Chuck Standard D-20 mm short HSK-A80 |
| A80.140.25 Shrink Fit Chuck Standard D-25 mm short HSK-A80 |
| A80.140.32 Shrink Fit Chuck Standard D-32 mm short HSK-A80 |
| A10.000.06 Weldon Tool Holder D-6 mm short HSK-A100 |
| A10.000.08 Weldon Tool Holder D-8 mm short HSK-A100 |
| A10.000.10 Weldon Tool Holder D-10 mm short HSK-A100 |
| A10.000.12 Weldon Tool Holder D-12 mm short HSK-A100 |
| A10.000.14 Weldon Tool Holder D-14 mm short HSK-A100 |
| A10.000.16 Weldon Tool Holder D-16 mm short HSK-A100 |
| A10.000.18 Weldon Tool Holder D-18 mm short HSK-A100 |
| A10.000.20 Weldon Tool Holder D-20 mm short HSK-A100 |
| A10.000.25 Weldon Tool Holder D-25 mm short HSK-A100 |
| A10.000.32 Weldon Tool Holder D-32 mm short HSK-A100 |
| A10.002.06 Weldon Tool Holder D-6 mm oversize HSK-A100 |
| A10.002.08 Weldon Tool Holder D-8 mm oversize HSK-A100 |
| A10.002.10 Weldon Tool Holder D-10 mm oversize HSK-A100 |
| A10.002.12 Weldon Tool Holder D-12 mm oversize HSK-A100 |
| A10.002.14 Weldon Tool Holder D-14 mm oversize HSK-A100 |
| A10.002.16 Weldon Tool Holder D-16 mm oversize HSK-A100 |
| A10.002.18 Weldon Tool Holder D-18 mm oversize HSK-A100 |
| A10.002.20 Weldon Tool Holder D-20 mm oversize HSK-A100 |
| A10.002.25 Weldon Tool Holder D-25 mm oversize HSK-A100 |
| A10.002.32 Weldon Tool Holder D-32 mm oversize HSK-A100 |
| A10.020.16 Collet Chuck ER 16 short HSK-A100 |
| A10.020.25 Collet Chuck ER 25 short HSK-A100 |
| A10.020.32 Collet Chuck ER 32 short HSK-A100 |
| A10.020.40 Collet Chuck ER 40 short HSK-A100 |
| A10.022.16 Collet Chuck ER 16 oversize HSK-A100 |
| A10.022.25 Collet Chuck ER 25 oversize HSK-A100 |
| A10.022.32 Collet Chuck ER 32 oversize HSK-A100 |
| A10.022.40 Collet Chuck ER 40 oversize HSK-A100 |
| A10.025.16.3 Power Collet Chuck ER 16 ultra short HSK-A100 |
| A10.025.25.3 Power Collet Chuck ER 25 ultra short HSK-A100 |
| A10.025.32.3 Power Collet Chuck ER 32 ultra short HSK-A100 |
| A10.020.16.3 Power Collet Chuck ER 16 short HSK-A100 |
| A10.020.25.3 Power Collet Chuck ER 25 short HSK-A100 |
| A10.020.32.3 Power Collet Chuck ER 32 short HSK-A100 |
| A10.024.16.3 Power Collet Chuck ER 16 ZG130 HSK-A100 |
| A10.024.25.3 Power Collet Chuck ER 25 ZG130 HSK-A100 |
| A10.024.32.3 Power Collet Chuck ER 32 ZG130 HSK-A100 |
| A10.022.16.3 Power Collet Chuck ER 16 oversize HSK-A100 |
| A10.022.25.3 Power Collet Chuck ER 25 oversize HSK-A100 |
| A10.022.32.3 Power Collet Chuck ER 32 oversize HSK-A100 |
| A10.025.16.3.HP High Precision Collet Chuck ER 16 ultra short HSK-A100 |
| A10.025.25.3.HP High Precision Collet Chuck ER 25 ultra short HSK-A100 |
| A10.025.32.3.HP High Precision Collet Chuck ER 32 ultra short HSK-A100 |
| A10.020.16.3.HP High Precision Collet Chuck ER 16 short HSK-A100 |
| A10.020.25.3.HP High Precision Collet Chuck ER 25 short HSK-A100 |
| A10.020.32.3.HP High Precision Collet Chuck ER 32 short HSK-A100 |
| A10.024.16.3.HP High Precision Collet Chuck ER 16 ZG130 HSK-A100 |
| A10.024.25.3.HP High Precision Collet Chuck ER 25 ZG130 HSK-A100 |
| A10.024.32.3.HP High Precision Collet Chuck ER 32 ZG130 HSK-A100 |
| A10.022.16.3.HP High Precision Collet Chuck ER 16 oversize HSK-A100 |
| A10.022.25.3.HP High Precision Collet Chuck ER 25 oversize HSK-A100 |
| A10.022.32.3.HP High Precision Collet Chuck ER 32 oversize HSK-A100 |
| A10.030.06 Whistle Notch Tool Holder D-6 mm short HSK-A100 |
| A10.030.08 Whistle Notch Tool Holder D-8 mm short HSK-A100 |
| A10.030.10 Whistle Notch Tool Holder D-10 mm short HSK-A100 |
| A10.030.12 Whistle Notch Tool Holder D-12 mm short HSK-A100 |
| A10.030.14 Whistle Notch Tool Holder D-14 mm short HSK-A100 |
| A10.030.16 Whistle Notch Tool Holder D-16 mm short HSK-A100 |
| A10.030.18 Whistle Notch Tool Holder D-18 mm short HSK-A100 |
| A10.030.20 Whistle Notch Tool Holder D-20 mm short HSK-A100 |
| A10.030.25 Whistle Notch Tool Holder D-25 mm short HSK-A100 |
| A10.030.32 Whistle Notch Tool Holder D-32 mm short HSK-A100 |
| A10.040.16 Combination Shell End Mill Arbor D-16 mm short HSK-A100 |
| A10.040.22 Combination Shell End Mill Arbor D-22 mm short HSK-A100 |
| A10.040.27 Combination Shell End Mill Arbor D-27 mm short HSK-A100 |
| A10.040.32 Combination Shell End Mill Arbor D-32 mm short HSK-A100 |
| A10.040.40 Combination Shell End Mill Arbor D-40 mm short HSK-A100 |
| A10.041.16 Combination Shell End Mill Arbor D-16 mm long HSK-A100 |
| A10.041.22 Combination Shell End Mill Arbor D-22 mm long HSK-A100 |
| A10.041.27 Combination Shell End Mill Arbor D-27 mm long HSK-A100 |
| A10.041.32 Combination Shell End Mill Arbor D-32 mm long HSK-A100 |
| A10.041.40 Combination Shell End Mill Arbor D-40 mm long HSK-A100 |
| A10.042.16 Combination Shell End Mill Arbor D-16 mm oversize HSK-A100 |
| A10.042.22 Combination Shell End Mill Arbor D-22 mm oversize HSK-A100 |
| A10.042.27 Combination Shell End Mill Arbor D-27 mm oversize HSK-A100 |
| A10.042.32 Combination Shell End Mill Arbor D-32 mm oversize HSK-A100 |
| A10.042.40 Combination Shell End Mill Arbor D-40 mm oversize HSK-A100 |
| A10.050.16.KKB Face Mill Arbor D-16 mm short HSK-A100 |
| A10.050.22.KKB Face Mill Arbor D-22 mm short HSK-A100 |
| A10.050.27.KKB Face Mill Arbor D-27 mm short HSK-A100 |
| A10.050.32.KKB Face Mill Arbor D-32 mm short HSK-A100 |
| A10.050.40.KKB Face Mill Arbor D-40 mm short HSK-A100 |
| A10.051.16.KKB Face Mill Arbor D-16 mm long HSK-A100 |
| A10.051.22.KKB Face Mill Arbor D-22 mm long HSK-A100 |
| A10.051.27.KKB Face Mill Arbor D-27 mm long HSK-A100 |
| A10.051.32.KKB Face Mill Arbor D-32 mm long HSK-A100 |
| A10.051.40.KKB Face Mill Arbor D-40 mm long HSK-A100 |
| A10.052.16.KKB Face Mill Arbor D-16 mm oversize HSK-A100 |
| A10.052.22.KKB Face Mill Arbor D-22 mm oversize HSK-A100 |
| A10.052.27.KKB Face Mill Arbor D-27 mm oversize HSK-A100 |
| A10.052.32.KKB Face Mill Arbor D-32 mm oversize HSK-A100 |
| A10.052.40.KKB Face Mill Arbor D-40 mm oversize HSK-A100 |
| A10.080.01 Adapter for Morse Taper with Tang MK 01 short HSK-A100 |
| A10.080.02 Adapter for Morse Taper with Tang MK 02 short HSK-A100 |
| A10.080.03 Adapter for Morse Taper with Tang MK 03 short HSK-A100 |
| A10.080.04 Adapter for Morse Taper with Tang MK 04 short HSK-A100 |
| A10.090.83 Blank Adapter D-83 ZG250 HSK-A100 |
| A10.111.13 Short Drill Chuck 0,5–13 short HSK-A100 |
| A10.111.16 Short Drill Chuck 2,5–16 short HSK-A100 |
| A10.120.01 High-Precision Chuck HG 01 short HSK-A100 |
| A10.120.02 High-Precision Chuck HG 02 short HSK-A100 |
| A10.120.03 High-Precision Chuck HG 03 short HSK-A100 |
| A10.122.01 High-Precision Chuck HG 01 oversize HSK-A100 |
| A10.122.02 High-Precision Chuck HG 02 oversize HSK-A100 |
| A10.122.03 High-Precision Chuck HG 03 oversize HSK-A100 |
| A10.130.01 Adapter for Morse Taper with Thread MK 01 short HSK-A100 |
| A10.130.02 Adapter for Morse Taper with Thread MK 02 short HSK-A100 |
| A10.130.03 Adapter for Morse Taper with Thread MK 03 short HSK-A100 |
| A10.130.04 Adapter for Morse Taper with Thread MK 04 short HSK-A100 |
| A10.140.06 Shrink Fit Chuck Standard D-6 mm short HSK-A100 |
| A10.140.08 Shrink Fit Chuck Standard D-8 mm short HSK-A100 |
| A10.140.10 Shrink Fit Chuck Standard D-10 mm short HSK-A100 |
| A10.140.12 Shrink Fit Chuck Standard D-12 mm short HSK-A100 |
| A10.140.14 Shrink Fit Chuck Standard D-14 mm short HSK-A100 |
| A10.140.16 Shrink Fit Chuck Standard D-16 mm short HSK-A100 |
| A10.140.18 Shrink Fit Chuck Standard D-18 mm short HSK-A100 |
| A10.140.20 Shrink Fit Chuck Standard D-20 mm short HSK-A100 |
| A10.140.25 Shrink Fit Chuck Standard D-25 mm short HSK-A100 |
| A10.140.32 Shrink Fit Chuck Standard D-32 mm short HSK-A100 |
| A10.144.06 Shrink Fit Chuck Standard D-6 mm ZG130 HSK-A100 |
| A10.144.08 Shrink Fit Chuck Standard D-8 mm ZG130 HSK-A100 |
| A10.144.10 Shrink Fit Chuck Standard D-10 mm ZG130 HSK-A100 |
| A10.144.12 Shrink Fit Chuck Standard D-12 mm ZG130 HSK-A100 |
| A10.144.14 Shrink Fit Chuck Standard D-14 mm ZG130 HSK-A100 |
| A10.144.16 Shrink Fit Chuck Standard D-16 mm ZG130 HSK-A100 |
| A10.144.18 Shrink Fit Chuck Standard D-18 mm ZG130 HSK-A100 |
| A10.144.20 Shrink Fit Chuck Standard D-20 mm ZG130 HSK-A100 |
| A10.144.25 Shrink Fit Chuck Standard D-25 mm ZG130 HSK-A100 |
| A10.144.32 Shrink Fit Chuck Standard D-32 mm ZG130 HSK-A100 |
| A10.142.06 Shrink Fit Chuck Standard D-6 mm oversize HSK-A100 |
| A10.142.08 Shrink Fit Chuck Standard D-8 mm oversize HSK-A100 |
| A10.142.10 Shrink Fit Chuck Standard D-10 mm oversize HSK-A100 |
| A10.142.12 Shrink Fit Chuck Standard D-12 mm oversize HSK-A100 |
| A10.142.14 Shrink Fit Chuck Standard D-14 mm oversize HSK-A100 |
| A10.142.16 Shrink Fit Chuck Standard D-16 mm oversize HSK-A100 |
| A10.142.18 Shrink Fit Chuck Standard D-18 mm oversize HSK-A100 |
| A10.142.20 Shrink Fit Chuck Standard D-20 mm oversize HSK-A100 |
| A10.142.25 Shrink Fit Chuck Standard D-25 mm oversize HSK-A100 |
| A10.142.32 Shrink Fit Chuck Standard D-32 mm oversize HSK-A100 |
| A10.146.06 Shrink Fit Chuck Standard D-6 mm ZG200 HSK-A100 |
| A10.146.08 Shrink Fit Chuck Standard D-8 mm ZG200 HSK-A100 |
| A10.146.10 Shrink Fit Chuck Standard D-10 mm ZG200 HSK-A100 |
| A10.146.12 Shrink Fit Chuck Standard D-12 mm ZG200 HSK-A100 |
| A10.146.14 Shrink Fit Chuck Standard D-14 mm ZG200 HSK-A100 |
| A10.146.16 Shrink Fit Chuck Standard D-16 mm ZG200 HSK-A100 |
| A10.146.18 Shrink Fit Chuck Standard D-18 mm ZG200 HSK-A100 |
| A10.146.20 Shrink Fit Chuck Standard D-20 mm ZG200 HSK-A100 |
| A10.146.25 Shrink Fit Chuck Standard D-25 mm ZG200 HSK-A100 |
| A10.146.32 Shrink Fit Chuck Standard D-32 mm ZG200 HSK-A100 |
| A10.140.06.3 Power Shrink Chuck D-6 mm short HSK-A100 |
| A10.140.06.37 Power Shrink Chuck with Safe-Lock D-6 mm short HSK-A100 |
| A10.140.08.3 Power Shrink Chuck D-8 mm short HSK-A100 |
| A10.140.08.37 Power Shrink Chuck with Safe-Lock D-8 mm short HSK-A100 |
| A10.140.10.3 Power Shrink Chuck D-10 mm short HSK-A100 |
| A10.140.10.37 Power Shrink Chuck with Safe-Lock D-10 mm short HSK-A100 |
| A10.140.12.3 Power Shrink Chuck D-12 mm short HSK-A100 |
| A10.140.12.37 Power Shrink Chuck with Safe-Lock D-12 mm short HSK-A100 |
| A10.140.14.3 Power Shrink Chuck D-14 mm short HSK-A100 |
| A10.140.14.37 Power Shrink Chuck with Safe-Lock D-14 mm short HSK-A100 |
| A10.140.16.3 Power Shrink Chuck D-16 mm short HSK-A100 |
| A10.140.16.37 Power Shrink Chuck with Safe-Lock D-16 mm short HSK-A100 |
| A10.140.18.3 Power Shrink Chuck D-18 mm short HSK-A100 |
| A10.140.18.37 Power Shrink Chuck with Safe-Lock D-18 mm short HSK-A100 |
| A10.140.20.3 Power Shrink Chuck D-20 mm short HSK-A100 |
| A10.140.20.37 Power Shrink Chuck with Safe-Lock D-20 mm short HSK-A100 |
| A10.140.25.3 Power Shrink Chuck D-25 mm short HSK-A100 |
| A10.140.25.37 Power Shrink Chuck with Safe-Lock D-25 mm short HSK-A100 |
| A10.142.06.3 Power Shrink Chuck D-6 mm oversize HSK-A100 |
| A10.142.06.37 Power Shrink Chuck with Safe-Lock D-6 mm oversize HSK-A100 |
| A10.142.08.3 Power Shrink Chuck D-8 mm oversize HSK-A100 |
| A10.142.08.37 Power Shrink Chuck with Safe-Lock D-8 mm oversize HSK-A100 |
| A10.142.10.3 Power Shrink Chuck D-10 mm oversize HSK-A100 |
| A10.142.10.37 Power Shrink Chuck with Safe-Lock D-10 mm oversize HSK-A100 |
| A10.142.12.3 Power Shrink Chuck D-12 mm oversize HSK-A100 |
| A10.142.12.37 Power Shrink Chuck with Safe-Lock D-12 mm oversize HSK-A100 |
| A10.142.14.3 Power Shrink Chuck D-14 mm oversize HSK-A100 |
| A10.142.14.37 Power Shrink Chuck with Safe-Lock D-14 mm oversize HSK-A100 |
| A10.142.16.3 Power Shrink Chuck D-16 mm oversize HSK-A100 |
| A10.142.16.37 Power Shrink Chuck with Safe-Lock D-16 mm oversize HSK-A100 |
| A10.142.18.3 Power Shrink Chuck D-18 mm oversize HSK-A100 |
| A10.142.18.37 Power Shrink Chuck with Safe-Lock D-18 mm oversize HSK-A100 |
| A10.142.20.3 Power Shrink Chuck D-20 mm oversize HSK-A100 |
| A10.142.20.37 Power Shrink Chuck with Safe-Lock D-20 mm oversize HSK-A100 |
| A10.142.25.3 Power Shrink Chuck D-25 mm oversize HSK-A100 |
| A10.142.25.37 Power Shrink Chuck with Safe-Lock D-25 mm oversize HSK-A100 |
| A10.146.06.3 Power Shrink Chuck D-6 mm ZG200 HSK-A100 |
| A10.146.06.37 Power Shrink Chuck with Safe-Lock D-6 mm ZG200 HSK-A100 |
| A10.146.08.3 Power Shrink Chuck D-8 mm ZG200 HSK-A100 |
| A10.146.08.37 Power Shrink Chuck with Safe-Lock D-8 mm ZG200 HSK-A100 |
| A10.146.10.3 Power Shrink Chuck D-10 mm ZG200 HSK-A100 |
| A10.146.10.37 Power Shrink Chuck with Safe-Lock D-10 mm ZG200 HSK-A100 |
| A10.146.12.3 Power Shrink Chuck D-12 mm ZG200 HSK-A100 |
| A10.146.12.37 Power Shrink Chuck with Safe-Lock D-12 mm ZG200 HSK-A100 |
| A10.146.14.3 Power Shrink Chuck D-14 mm ZG200 HSK-A100 |
| A10.146.14.37 Power Shrink Chuck with Safe-Lock D-14 mm ZG200 HSK-A100 |
| A10.146.16.3 Power Shrink Chuck D-16 mm ZG200 HSK-A100 |
| A10.146.16.37 Power Shrink Chuck with Safe-Lock D-16 mm ZG200 HSK-A100 |
| A10.146.18.3 Power Shrink Chuck D-18 mm ZG200 HSK-A100 |
| A10.146.18.37 Power Shrink Chuck with Safe-Lock D-18 mm ZG200 HSK-A100 |
| A10.146.20.3 Power Shrink Chuck D-20 mm ZG200 HSK-A100 |
| A10.146.20.37 Power Shrink Chuck with Safe-Lock D-20 mm ZG200 HSK-A100 |
| A10.146.25.3 Power Shrink Chuck D-25 mm ZG200 HSK-A100 |
| A10.146.25.37 Power Shrink Chuck with Safe-Lock D-25 mm ZG200 HSK-A100 |
| A10.140.16.6 Heavy Duty Shrink Chuck 13kW D-16 mm short HSK-A100 |
| A10.140.16.67 Heavy Duty Shrink Chuck with Safe-Lock D-16 mm short HSK-A100 |
| A10.140.20.6 Heavy Duty Shrink Chuck 13kW D-20 mm short HSK-A100 |
| A10.140.20.67 Heavy Duty Shrink Chuck with Safe-Lock D-20 mm short HSK-A100 |
| A10.150.16.6 Heavy Duty Shrink Chuck D-16 mm short HSK-A100 |
| A10.150.16.67 Heavy Duty Shrink Chuck with Safe-Lock D-16 mm short HSK-A100 |
| A10.150.20.6 Heavy Duty Shrink Chuck D-20 mm short HSK-A100 |
| A10.150.20.67 Heavy Duty Shrink Chuck with Safe-Lock D-20 mm short HSK-A100 |
| A10.150.25.6 Heavy Duty Shrink Chuck D-25 mm short HSK-A100 |
| A10.150.25.67 Heavy Duty Shrink Chuck with Safe-Lock D-25 mm short HSK-A100 |
| A10.150.32.6 Heavy Duty Shrink Chuck D-32 mm short HSK-A100 |
| A10.150.32.67 Heavy Duty Shrink Chuck with Safe-Lock D-32 mm short HSK-A100 |
| A10.150.40.6 Heavy Duty Shrink Chuck D-40 mm short HSK-A100 |
| A10.150.40.67 Heavy Duty Shrink Chuck with Safe-Lock D-40 mm short HSK-A100 |
| A10.150.50.6 Heavy Duty Shrink Chuck D-50 mm short HSK-A100 |
| A10.150.50.67 Heavy Duty Shrink Chuck with Safe-Lock D-50 mm short HSK-A100 |
| A10.152.16.6 Heavy Duty Shrink Chuck D-16 mm oversize HSK-A100 |
| A10.152.16.67 Heavy Duty Shrink Chuck with Safe-Lock D-16 mm oversize HSK-A100 |
| A10.152.20.6 Heavy Duty Shrink Chuck D-20 mm oversize HSK-A100 |
| A10.152.20.67 Heavy Duty Shrink Chuck with Safe-Lock D-20 mm oversize HSK-A100 |
| A10.152.25.6 Heavy Duty Shrink Chuck D-25 mm oversize HSK-A100 |
| A10.152.25.67 Heavy Duty Shrink Chuck with Safe-Lock D-25 mm oversize HSK-A100 |
| A10.152.32.6 Heavy Duty Shrink Chuck D-32 mm oversize HSK-A100 |
| A10.152.32.67 Heavy Duty Shrink Chuck with Safe-Lock D-32 mm oversize HSK-A100 |
| A10.152.40.6 Heavy Duty Shrink Chuck D-40 mm oversize HSK-A100 |
| A10.152.40.67 Heavy Duty Shrink Chuck with Safe-Lock D-40 mm oversize HSK-A100 |
| A10.152.50.6 Heavy Duty Shrink Chuck D-50 mm oversize HSK-A100 |
| A10.152.50.67 Heavy Duty Shrink Chuck with Safe-Lock D-50 mm oversize HSK-A100 |
| A10.156.16.6 Heavy Duty Shrink Chuck D-16 mm ZG200 HSK-A100 |
| A10.156.16.67 Heavy Duty Shrink Chuck with Safe-Lock D-16 mm ZG200 HSK-A100 |
| A10.156.20.6 Heavy Duty Shrink Chuck D-20 mm ZG200 HSK-A100 |
| A10.156.20.67 Heavy Duty Shrink Chuck with Safe-Lock D-20 mm ZG200 HSK-A100 |
| A10.156.25.6 Heavy Duty Shrink Chuck D-25 mm ZG200 HSK-A100 |
| A10.156.25.67 Heavy Duty Shrink Chuck with Safe-Lock D-25 mm ZG200 HSK-A100 |
| A10.156.32.6 Heavy Duty Shrink Chuck D-32 mm ZG200 HSK-A100 |
| A10.156.32.67 Heavy Duty Shrink Chuck with Safe-Lock D-32 mm ZG200 HSK-A100 |
| A10.156.40.6 Heavy Duty Shrink Chuck D-40 mm ZG200 HSK-A100 |
| A10.156.40.67 Heavy Duty Shrink Chuck with Safe-Lock D-40 mm ZG200 HSK-A100 |
| A10.156.50.6 Heavy Duty Shrink Chuck D-50 mm ZG200 HSK-A100 |
| A10.156.50.67 Heavy Duty Shrink Chuck with Safe-Lock D-50 mm ZG200 HSK-A100 |
| A125.020.25.3 Power Collet Chuck ER 25 short HSK-A125 |
| A125.020.32.3 Power Collet Chuck ER 32 short HSK-A125 |
| A125.024.25.3 Power Collet Chuck ER 25 ZG130 HSK-A125 |
| A125.024.32.3 Power Collet Chuck ER 32 ZG130 HSK-A125 |
| A125.022.25.3 Power Collet Chuck ER 25 oversize HSK-A125 |
| A125.022.32.3 Power Collet Chuck ER 32 oversize HSK-A125 |
| A125.026.25.3 Power Collet Chuck ER 25 ZG200 HSK-A125 |
| A125.026.32.3 Power Collet Chuck ER 32 ZG200 HSK-A125 |
| A125.050.22.3.KKB Face Mill Arbor D-22 mm short HSK-A125 |
| A125.050.27.3.KKB Face Mill Arbor D-27 mm short HSK-A125 |
| A125.054.22.3.KKB Face Mill Arbor D-22 mm ZG130 HSK-A125 |
| A125.054.27.3.KKB Face Mill Arbor D-27 mm ZG130 HSK-A125 |
| A125.052.22.3.KKB Face Mill Arbor D-22 mm oversize HSK-A125 |
| A125.052.27.3.KKB Face Mill Arbor D-27 mm oversize HSK-A125 |
| A125.056.22.3.KKB Face Mill Arbor D-22 mm ZG200 HSK-A125 |
| A125.056.27.3.KKB Face Mill Arbor D-27 mm ZG200 HSK-A125 |
| A125.140.10.3 Power Shrink Chuck D-10 mm ZG130 HSK-A125 |
| A125.140.10.37 Power Shrink Chuck with Safe-Lock D-10 mm ZG130 HSK-A125 |
| A125.140.12.3 Power Shrink Chuck D-12 mm ZG130 HSK-A125 |
| A125.140.12.37 Power Shrink Chuck with Safe-Lock D-12 mm ZG130 HSK-A125 |
| A125.140.16.3 Power Shrink Chuck D-16 mm ZG130 HSK-A125 |
| A125.140.16.37 Power Shrink Chuck with Safe-Lock D-16 mm ZG130 HSK-A125 |
| A125.140.20.3 Power Shrink Chuck D-20 mm ZG130 HSK-A125 |
| A125.140.20.37 Power Shrink Chuck with Safe-Lock D-20 mm ZG130 HSK-A125 |
| A125.140.25.3 Power Shrink Chuck D-25 mm ZG130 HSK-A125 |
| A125.140.25.37 Power Shrink Chuck with Safe-Lock D-25 mm ZG130 HSK-A125 |
| A125.142.10.3 Power Shrink Chuck D-10 mm oversize HSK-A125 |
| A125.142.10.37 Power Shrink Chuck with Safe-Lock D-10 mm oversize HSK-A125 |
| A125.142.12.3 Power Shrink Chuck D-12 mm oversize HSK-A125 |
| A125.142.12.37 Power Shrink Chuck with Safe-Lock D-12 mm oversize HSK-A125 |
| A125.142.16.3 Power Shrink Chuck D-16 mm oversize HSK-A125 |
| A125.142.16.37 Power Shrink Chuck with Safe-Lock D-16 mm oversize HSK-A125 |
| A125.142.20.3 Power Shrink Chuck D-20 mm oversize HSK-A125 |
| A125.142.20.37 Power Shrink Chuck with Safe-Lock D-20 mm oversize HSK-A125 |
| A125.142.25.3 Power Shrink Chuck D-25 mm oversize HSK-A125 |
| A125.142.25.37 Power Shrink Chuck with Safe-Lock D-25 mm oversize HSK-A125 |
| A125.146.10.3 Power Shrink Chuck D-10 mm ZG200 HSK-A125 |
| A125.146.10.37 Power Shrink Chuck with Safe-Lock D-10 mm ZG200 HSK-A125 |
| A125.146.12.3 Power Shrink Chuck D-12 mm ZG200 HSK-A125 |
| A125.146.12.37 Power Shrink Chuck with Safe-Lock D-12 mm ZG200 HSK-A125 |
| A125.146.16.3 Power Shrink Chuck D-16 mm ZG200 HSK-A125 |
| A125.146.16.37 Power Shrink Chuck with Safe-Lock D-16 mm ZG200 HSK-A125 |
| A125.146.20.3 Power Shrink Chuck D-20 mm ZG200 HSK-A125 |
| A125.146.20.37 Power Shrink Chuck with Safe-Lock D-20 mm ZG200 HSK-A125 |
| A125.146.25.3 Power Shrink Chuck D-25 mm ZG200 HSK-A125 |
| A125.146.25.37 Power Shrink Chuck with Safe-Lock D-25 mm ZG200 HSK-A125 |
| A125.150.16.6 Heavy Duty Shrink Chuck D-16 mm ZG130 HSK-A125 |
| A125.150.16.67 Heavy Duty Shrink Chuck with Safe-Lock D-16 mm ZG130 HSK-A125 |
| A125.150.20.6 Heavy Duty Shrink Chuck D-20 mm ZG130 HSK-A125 |
| A125.150.20.67 Heavy Duty Shrink Chuck with Safe-Lock D-20 mm ZG130 HSK-A125 |
| A125.150.25.6 Heavy Duty Shrink Chuck D-25 mm ZG130 HSK-A125 |
| A125.150.25.67 Heavy Duty Shrink Chuck with Safe-Lock D-25 mm ZG130 HSK-A125 |
| A125.150.32.6 Heavy Duty Shrink Chuck D-32 mm ZG130 HSK-A125 |
| A125.150.32.67 Heavy Duty Shrink Chuck with Safe-Lock D-32 mm ZG130 HSK-A125 |
| A125.150.40.6 Heavy Duty Shrink Chuck D-40 mm ZG130 HSK-A125 |
| A125.150.40.67 Heavy Duty Shrink Chuck with Safe-Lock D-40 mm ZG130 HSK-A125 |
| A125.150.50.6 Heavy Duty Shrink Chuck D-50 mm ZG130 HSK-A125 |
| A125.150.50.67 Heavy Duty Shrink Chuck with Safe-Lock D-50 mm ZG130 HSK-A125 |
| A125.152.16.6 Heavy Duty Shrink Chuck D-16 mm oversize HSK-A125 |
| A125.152.16.67 Heavy Duty Shrink Chuck with Safe-Lock D-16 mm oversize HSK-A125 |
| A125.152.20.6 Heavy Duty Shrink Chuck D-20 mm oversize HSK-A125 |
| A125.152.20.67 Heavy Duty Shrink Chuck with Safe-Lock D-20 mm oversize HSK-A125 |
| A125.152.25.6 Heavy Duty Shrink Chuck D-25 mm oversize HSK-A125 |
| A125.152.25.67 Heavy Duty Shrink Chuck with Safe-Lock D-25 mm oversize HSK-A125 |
| A125.152.32.6 Heavy Duty Shrink Chuck D-32 mm oversize HSK-A125 |
| A125.152.32.67 Heavy Duty Shrink Chuck with Safe-Lock D-32 mm oversize HSK-A125 |
| A125.152.40.6 Heavy Duty Shrink Chuck D-40 mm oversize HSK-A125 |
| A125.152.40.67 Heavy Duty Shrink Chuck with Safe-Lock D-40 mm oversize HSK-A125 |
| A125.152.50.6 Heavy Duty Shrink Chuck D-50 mm oversize HSK-A125 |
| A125.152.50.67 Heavy Duty Shrink Chuck with Safe-Lock D-50 mm oversize HSK-A125 |
| A125.156.16.6 Heavy Duty Shrink Chuck D-16 mm ZG200 HSK-A125 |
| A125.156.16.67 Heavy Duty Shrink Chuck with Safe-Lock D-16 mm ZG200 HSK-A125 |
| A125.156.20.6 Heavy Duty Shrink Chuck D-20 mm ZG200 HSK-A125 |
| A125.156.20.67 Heavy Duty Shrink Chuck with Safe-Lock D-20 mm ZG200 HSK-A125 |
| A125.156.25.6 Heavy Duty Shrink Chuck D-25 mm ZG200 HSK-A125 |
| A125.156.25.67 Heavy Duty Shrink Chuck with Safe-Lock D-25 mm ZG200 HSK-A125 |
| A125.156.32.6 Heavy Duty Shrink Chuck D-32 mm ZG200 HSK-A125 |
| A125.156.32.67 Heavy Duty Shrink Chuck with Safe-Lock D-32 mm ZG200 HSK-A125 |
| A125.156.40.6 Heavy Duty Shrink Chuck D-40 mm ZG200 HSK-A125 |
| A125.156.40.67 Heavy Duty Shrink Chuck with Safe-Lock D-40 mm ZG200 HSK-A125 |
| A125.156.50.6 Heavy Duty Shrink Chuck D-50 mm ZG200 HSK-A125 |
| A125.156.50.67 Heavy Duty Shrink Chuck with Safe-Lock D-50 mm ZG200 HSK-A125 |
| E25.020.16.7 Collet Chuck Mini ER 16 short HSK-E25 |
| E25.025.16.3 Power Collet Chuck ER 16 ultra short HSK-E25 |
| E25.020.16 Power Collet Chuck ER 16 short HSK-E25 |
| E25.025.16.3.HP High Precision Collet Chuck ER 16 ultra short HSK-E25 |
| E25.185.03 Mini Shrink Chuck D-3 mm ultra short HSK-E25 |
| E25.185.04 Mini Shrink Chuck D-4 mm ultra short HSK-E25 |
| E25.185.05 Mini Shrink Chuck D-5 mm ultra short HSK-E25 |
| E25.185.06 Mini Shrink Chuck D-6 mm ultra short HSK-E25 |
| E25.185.08 Mini Shrink Chuck D-8 mm ultra short HSK-E25 |
| E25.185.10 Mini Shrink Chuck D-10 mm ultra short HSK-E25 |
| E25.185.12 Mini Shrink Chuck D-12 mm ultra short HSK-E25 |
| E25.180.03 Mini Shrink Chuck D-3 mm short HSK-E25 |
| E25.180.04 Mini Shrink Chuck D-4 mm short HSK-E25 |
| E25.180.05 Mini Shrink Chuck D-5 mm short HSK-E25 |
| E25.180.06 Mini Shrink Chuck D-6 mm short HSK-E25 |
| E25.180.06.V2 Mini Shrink Chuck D-6 mm short HSK-E25 Version 2 |
| E25.180.06.V3 Mini Shrink Chuck D-6 mm short HSK-E25 Version 3 |
| E25.180.08 Mini Shrink Chuck D-8 mm short HSK-E25 |
| E25.180.10 Mini Shrink Chuck D-10 mm short HSK-E25 |
| E25.180.10.V2 Mini Shrink Chuck D-10 mm short HSK-E25 Version 2 |
| E25.180.10.V3 Mini Shrink Chuck D-10 mm short HSK-E25 Version 3 |
| E25.180.12 Mini Shrink Chuck D-12 mm short HSK-E25 |
| E32.020.16 Collet Chuck ER 16 short HSK-E32 |
| E32.020.25 Collet Chuck ER 25 short HSK-E32 |
| E32.021.16 Collet Chuck ER 16 long HSK-E32 |
| E32.025.16.3 Power Collet Chuck ER 16 ultra short HSK-E32 |
| E32.025.25.3 Power Collet Chuck ER 25 ultra short HSK-E32 |
| E32.025.16.3.HP High Precision Collet Chuck ER 16 ultra short HSK-E32 |
| E32.025.25.3.HP High Precision Collet Chuck ER 25 ultra short HSK-E32 |
| E32.140.03 Shrink Fit Chuck Standard D-3 mm short HSK-E32 |
| E32.140.04 Shrink Fit Chuck Standard D-4 mm short HSK-E32 |
| E32.140.05 Shrink Fit Chuck Standard D-5 mm short HSK-E32 |
| E32.140.06 Shrink Fit Chuck Standard D-6 mm short HSK-E32 |
| E32.140.08 Shrink Fit Chuck Standard D-8 mm short HSK-E32 |
| E32.140.10 Shrink Fit Chuck Standard D-10 mm short HSK-E32 |
| E40.025.11 Collet Chuck ER 11 ultra short HSK-E40 |
| E40.025.16 Collet Chuck ER 16 ultra short HSK-E40 |
| E40.025.25 Collet Chuck ER 25 ultra short HSK-E40 |
| E40.025.32 Collet Chuck ER 32 ultra short HSK-E40 |
| E40.020.16 Collet Chuck ER 16 short HSK-E40 |
| E40.020.25 Collet Chuck ER 25 short HSK-E40 |
| E40.025.16.3 Power Collet Chuck ER 16 ultra short HSK-E40 |
| E40.025.25.3 Power Collet Chuck ER 25 ultra short HSK-E40 |
| E40.025.32.3 Power Collet Chuck ER 32 ultra short HSK-E40 |
| E40.020.16.3 Power Collet Chuck ER 16 short HSK-E40 |
| E40.020.25.3 Power Collet Chuck ER 25 short HSK-E40 |
| E40.020.32.3 Power Collet Chuck ER 32 short HSK-E40 |
| E40.025.16.3.HP High Precision Collet Chuck ER 16 ultra short HSK-E40 |
| E40.025.25.3.HP High Precision Collet Chuck ER 25 ultra short HSK-E40 |
| E40.025.32.3.HP High Precision Collet Chuck ER 32 ultra short HSK-E40 |
| E40.020.16.3.HP High Precision Collet Chuck ER 16 short HSK-E40 |
| E40.020.25.3.HP High Precision Collet Chuck ER 25 short HSK-E40 |
| E40.020.32.3.HP High Precision Collet Chuck ER 32 short HSK-E40 |
| E40.145.06 Shrink Fit Chuck Standard D-6 mm ultra short HSK-E40 |
| E40.145.08 Shrink Fit Chuck Standard D-8 mm ultra short HSK-E40 |
| E40.145.10 Shrink Fit Chuck Standard D-10 mm ultra short HSK-E40 |
| E40.145.12 Shrink Fit Chuck Standard D-12 mm ultra short HSK-E40 |
| E40.145.14 Shrink Fit Chuck Standard D-14 mm ultra short HSK-E40 |
| E40.145.16 Shrink Fit Chuck Standard D-16 mm ultra short HSK-E40 |
| E40.140.03 Shrink Fit Chuck Standard D-3 mm short HSK-E40 |
| E40.140.04 Shrink Fit Chuck Standard D-4 mm short HSK-E40 |
| E40.140.05 Shrink Fit Chuck Standard D-5 mm short HSK-E40 |
| E40.140.06 Shrink Fit Chuck Standard D-6 mm short HSK-E40 |
| E40.140.08 Shrink Fit Chuck Standard D-8 mm short HSK-E40 |
| E40.140.10 Shrink Fit Chuck Standard D-10 mm short HSK-E40 |
| E40.140.12 Shrink Fit Chuck Standard D-12 mm short HSK-E40 |
| E40.140.14 Shrink Fit Chuck Standard D-14 mm short HSK-E40 |
| E40.140.16 Shrink Fit Chuck Standard D-16 mm short HSK-E40 |
| E40.175.03 Mini Shrink Chuck (extra slim) D-3 mm ultra short HSK-E40 |
| E40.175.04 Mini Shrink Chuck (extra slim) D-4 mm ultra short HSK-E40 |
| E40.175.05 Mini Shrink Chuck (extra slim) D-5 mm ultra short HSK-E40 |
| E40.175.06 Mini Shrink Chuck (extra slim) D-6 mm ultra short HSK-E40 |
| E40.175.08 Mini Shrink Chuck (extra slim) D-8 mm ultra short HSK-E40 |
| E40.175.10 Mini Shrink Chuck (extra slim) D-10 mm ultra short HSK-E40 |
| E40.175.12 Mini Shrink Chuck (extra slim) D-12 mm ultra short HSK-E40 |
| E40.170.03 Mini Shrink Chuck (extra slim) D-3 mm short HSK-E40 |
| E40.170.04 Mini Shrink Chuck (extra slim) D-4 mm short HSK-E40 |
| E40.170.05 Mini Shrink Chuck (extra slim) D-5 mm short HSK-E40 |
| E40.170.06 Mini Shrink Chuck (extra slim) D-6 mm short HSK-E40 |
| E40.170.08 Mini Shrink Chuck (extra slim) D-8 mm short HSK-E40 |
| E40.170.10 Mini Shrink Chuck (extra slim) D-10 mm short HSK-E40 |
| E40.170.12 Mini Shrink Chuck (extra slim) D-12 mm short HSK-E40 |
| E40.173.03 Mini Shrink Chuck (extra slim) D-3 mm ZG80 HSK-E40 |
| E40.173.04 Mini Shrink Chuck (extra slim) D-4 mm ZG80 HSK-E40 |
| E40.173.05 Mini Shrink Chuck (extra slim) D-5 mm ZG80 HSK-E40 |
| E40.173.06 Mini Shrink Chuck (extra slim) D-6 mm ZG80 HSK-E40 |
| E40.173.08 Mini Shrink Chuck (extra slim) D-8 mm ZG80 HSK-E40 |
| E40.173.10 Mini Shrink Chuck (extra slim) D-10 mm ZG80 HSK-E40 |
| E40.173.12 Mini Shrink Chuck (extra slim) D-12 mm ZG80 HSK-E40 |
| E40.185.03 Mini Shrink Chuck D-3 mm ultra short HSK-E40 |
| E40.185.04 Mini Shrink Chuck D-4 mm ultra short HSK-E40 |
| E40.185.05 Mini Shrink Chuck D-5 mm ultra short HSK-E40 |
| E40.185.06 Mini Shrink Chuck D-6 mm ultra short HSK-E40 |
| E40.185.08 Mini Shrink Chuck D-8 mm ultra short HSK-E40 |
| E40.185.10 Mini Shrink Chuck D-10 mm ultra short HSK-E40 |
| E40.185.12 Mini Shrink Chuck D-12 mm ultra short HSK-E40 |
| E40.180.03 Mini Shrink Chuck D-3 mm short HSK-E40 |
| E40.180.04 Mini Shrink Chuck D-4 mm short HSK-E40 |
| E40.180.05 Mini Shrink Chuck D-5 mm short HSK-E40 |
| E40.180.06 Mini Shrink Chuck D-6 mm short HSK-E40 |
| E40.180.08 Mini Shrink Chuck D-8 mm short HSK-E40 |
| E40.180.10 Mini Shrink Chuck D-10 mm short HSK-E40 |
| E40.180.12 Mini Shrink Chuck D-12 mm short HSK-E40 |
| E40.183.03 Mini Shrink Chuck D-3 mm ZG80 HSK-E40 |
| E40.183.04 Mini Shrink Chuck D-4 mm ZG80 HSK-E40 |
| E40.183.05 Mini Shrink Chuck D-5 mm ZG80 HSK-E40 |
| E40.183.06 Mini Shrink Chuck D-6 mm ZG80 HSK-E40 |
| E40.183.08 Mini Shrink Chuck D-8 mm ZG80 HSK-E40 |
| E40.183.10 Mini Shrink Chuck D-10 mm ZG80 HSK-E40 |
| E40.183.12 Mini Shrink Chuck D-12 mm ZG80 HSK-E40 |
| E50.000.06 Weldon Tool Holder D-6 mm short HSK-E50 |
| E50.000.08 Weldon Tool Holder D-8 mm short HSK-E50 |
| E50.000.10 Weldon Tool Holder D-10 mm short HSK-E50 |
| E50.000.12 Weldon Tool Holder D-12 mm short HSK-E50 |
| E50.000.16 Weldon Tool Holder D-16 mm short HSK-E50 |
| E50.000.20 Weldon Tool Holder D-20 mm short HSK-E50 |
| E50.025.11 Collet Chuck ER 11 ultra short HSK-E50 |
| E50.025.16 Collet Chuck ER 16 ultra short HSK-E50 |
| E50.025.20 Collet Chuck ER 20 ultra short HSK-E50 |
| E50.025.25 Collet Chuck ER 25 ultra short HSK-E50 |
| E50.025.32 Collet Chuck ER 32 ultra short HSK-E50 |
| E50.020.16 Collet Chuck ER 16 short HSK-E50 |
| E50.020.25 Collet Chuck ER 25 short HSK-E50 |
| E50.020.32 Collet Chuck ER 32 short HSK-E50 |
| E50.025.16.3 Power Collet Chuck ER 16 ultra short HSK-E50 |
| E50.025.25.3 Power Collet Chuck ER 25 ultra short HSK-E50 |
| E50.025.32.3 Power Collet Chuck ER 25 ultra short HSK-E50 |
| E50.025.16.3.HP High Precision Collet Chuck ER 16 ultra short HSK-E50 |
| E50.025.25.3.HP High Precision Collet Chuck ER 25 ultra short HSK-E50 |
| E50.025.32.3.HP High Precision Collet Chuck ER 25 ultra short HSK-E50 |
| E50.050.16.KKB Face Mill Arbor D-16 mm short HSK-E50 |
| E50.050.22.KKB Face Mill Arbor D-22 mm short HSK-E50 |
| E50.050.27.KKB Face Mill Arbor D-27 mm short HSK-E50 |
| E50.050.32.KKB Face Mill Arbor D-32 mm short HSK-E50 |
| E50.051.16.KKB Face Mill Arbor D-16 mm long HSK-E50 |
| E50.051.22.KKB Face Mill Arbor D-22 mm long HSK-E50 |
| E50.051.27.KKB Face Mill Arbor D-27 mm long HSK-E50 |
| E50.051.32.KKB Face Mill Arbor D-32 mm long HSK-E50 |
| E50.052.22.KKB Face Mill Arbor D-22 mm oversize HSK-E50 |
| E50.140.03 Shrink Fit Chuck Standard D-3 mm short HSK-E50 |
| E50.140.04 Shrink Fit Chuck Standard D-4 mm short HSK-E50 |
| E50.140.05 Shrink Fit Chuck Standard D-5 mm short HSK-E50 |
| E50.140.06 Shrink Fit Chuck Standard D-6 mm short HSK-E50 |
| E50.140.08 Shrink Fit Chuck Standard D-8 mm short HSK-E50 |
| E50.140.10 Shrink Fit Chuck Standard D-10 mm short HSK-E50 |
| E50.140.12 Shrink Fit Chuck Standard D-12 mm short HSK-E50 |
| E50.140.14 Shrink Fit Chuck Standard D-14 mm short HSK-E50 |
| E50.140.16 Shrink Fit Chuck Standard D-16 mm short HSK-E50 |
| E50.144.06 Shrink Fit Chuck Standard D-6 mm ZG130 HSK-E50 |
| E50.144.08 Shrink Fit Chuck Standard D-8 mm ZG130 HSK-E50 |
| E50.144.10 Shrink Fit Chuck Standard D-10 mm ZG130 HSK-E50 |
| E50.144.12 Shrink Fit Chuck Standard D-12 mm ZG130 HSK-E50 |
| E50.144.14 Shrink Fit Chuck Standard D-14 mm ZG130 HSK-E50 |
| E50.144.16 Shrink Fit Chuck Standard D-16 mm ZG130 HSK-E50 |
| E50.170.03 Mini Shrink Chuck (extra slim) D-3 mm short HSK-E50 |
| E50.170.04 Mini Shrink Chuck (extra slim) D-4 mm short HSK-E50 |
| E50.170.05 Mini Shrink Chuck (extra slim) D-5 mm short HSK-E50 |
| E50.170.06 Mini Shrink Chuck (extra slim) D-6 mm short HSK-E50 |
| E50.170.08 Mini Shrink Chuck (extra slim) D-8 mm short HSK-E50 |
| E50.170.10 Mini Shrink Chuck (extra slim) D-10 mm short HSK-E50 |
| E50.170.12 Mini Shrink Chuck (extra slim) D-12 mm short HSK-E50 |
| E50.173.03 Mini Shrink Chuck (extra slim) D-3 mm ZG80 HSK-E50 |
| E50.173.04 Mini Shrink Chuck (extra slim) D-4 mm ZG80 HSK-E50 |
| E50.173.05 Mini Shrink Chuck (extra slim) D-5 mm ZG80 HSK-E50 |
| E50.173.06 Mini Shrink Chuck (extra slim) D-6 mm ZG80 HSK-E50 |
| E50.173.08 Mini Shrink Chuck (extra slim) D-8 mm ZG80 HSK-E50 |
| E50.173.10 Mini Shrink Chuck (extra slim) D-10 mm ZG80 HSK-E50 |
| E50.173.12 Mini Shrink Chuck (extra slim) D-12 mm ZG80 HSK-E50 |
| E50.171.05 Mini Shrink Chuck (extra slim) D-5 mm ZG100 HSK-E50 |
| E50.171.06 Mini Shrink Chuck (extra slim) D-6 mm ZG100 HSK-E50 |
| E50.171.08 Mini Shrink Chuck (extra slim) D-8 mm ZG100 HSK-E50 |
| E50.171.10 Mini Shrink Chuck (extra slim) D-10 mm ZG100 HSK-E50 |
| E50.171.12 Mini Shrink Chuck (extra slim) D-12 mm ZG100 HSK-E50 |
| E50.180.03 Mini Shrink Chuck D-3 mm short HSK-E50 |
| E50.180.04 Mini Shrink Chuck D-4 mm short HSK-E50 |
| E50.180.05 Mini Shrink Chuck D-5 mm short HSK-E50 |
| E50.180.06 Mini Shrink Chuck D-6 mm short HSK-E50 |
| E50.180.08 Mini Shrink Chuck D-8 mm short HSK-E50 |
| E50.180.10 Mini Shrink Chuck D-10 mm short HSK-E50 |
| E50.180.12 Mini Shrink Chuck D-12 mm short HSK-E50 |
| E50.183.03 Mini Shrink Chuck D-3 mm ZG80 HSK-E50 |
| E50.183.04 Mini Shrink Chuck D-4 mm ZG80 HSK-E50 |
| E50.183.05 Mini Shrink Chuck D-5 mm ZG80 HSK-E50 |
| E50.183.06 Mini Shrink Chuck D-6 mm ZG80 HSK-E50 |
| E50.183.08 Mini Shrink Chuck D-8 mm ZG80 HSK-E50 |
| E50.183.10 Mini Shrink Chuck D-10 mm ZG80 HSK-E50 |
| E50.183.12 Mini Shrink Chuck D-12 mm ZG80 HSK-E50 |
| E50.181.05 Mini Shrink Chuck D-5 mm ZG100 HSK-E50 |
| E50.181.06 Mini Shrink Chuck D-6 mm ZG100 HSK-E50 |
| E50.181.08 Mini Shrink Chuck D-8 mm ZG100 HSK-E50 |
| E50.181.10 Mini Shrink Chuck D-10 mm ZG100 HSK-E50 |
| E50.181.12 Mini Shrink Chuck D-12 mm ZG100 HSK-E50 |
| F63.025.11 Collet Chuck ER 11 ultra short HSK-F63 |
| F63.025.16 Collet Chuck ER 16 ultra short HSK-F63 |
| F63.025.20 Collet Chuck ER 20 ultra short HSK-F63 |
| F63.025.25 Collet Chuck ER 25 ultra short HSK-F63 |
| F63.025.32 Collet Chuck ER 32 ultra short HSK-F63 |
| F63.025.40 Collet Chuck ER 40 ultra short HSK-F63 |
| F63.020.11 Collet Chuck ER 11 short HSK-F63 |
| F63.020.16 Collet Chuck ER 16 short HSK-F63 |
| F63.020.20 Collet Chuck ER 20 short HSK-F63 |
| F63.020.25 Collet Chuck ER 25 short HSK-F63 |
| F63.020.32 Collet Chuck ER 32 short HSK-F63 |
| F63.020.40 Collet Chuck ER 40 short HSK-F63 |
| F63.050.22.KKB Face Mill Arbor D-22 mm short HSK-F63 |
| F63.050.27.KKB Face Mill Arbor D-27 mm short HSK-F63 |
| F63.140.03 Shrink Fit Chuck Standard D-3 mm short HSK-F63 |
| F63.140.04 Shrink Fit Chuck Standard D-4 mm short HSK-F63 |
| F63.140.04.1 Shrink Fit Chuck Standard D-4 mm short, without slits, HSK-F63 |
| F63.140.05 Shrink Fit Chuck Standard D-5 mm short HSK-F63 |
| F63.140.06 Shrink Fit Chuck Standard D-6 mm short HSK-F63 |
| F63.140.08 Shrink Fit Chuck Standard D-8 mm short HSK-F63 |
| F63.140.10 Shrink Fit Chuck Standard D-10 mm short HSK-F63 |
| F63.140.12 Shrink Fit Chuck Standard D-12 mm short HSK-F63 |
| F63.140.16 Shrink Fit Chuck Standard D-16 mm short HSK-F63 |
| F63.140.20 Shrink Fit Chuck Standard D-20 mm short HSK-F63 |
| F63.140.25 Shrink Fit Chuck Standard D-25 mm short HSK-F63 |
| F63.144.06 Shrink Fit Chuck Standard D-6 mm ZG130 HSK-F63 |
| F63.144.08 Shrink Fit Chuck Standard D-8 mm ZG130 HSK-F63 |
| F63.144.10 Shrink Fit Chuck Standard D-10 mm ZG130 HSK-F63 |
| F63.144.12 Shrink Fit Chuck Standard D-12 mm ZG130 HSK-F63 |
| F63.144.16 Shrink Fit Chuck Standard D-16 mm ZG130 HSK-F63 |
| F63.144.20 Shrink Fit Chuck Standard D-20 mm ZG130 HSK-F63 |
| F63.144.25 Shrink Fit Chuck Standard D-25 mm ZG130 HSK-F63 |
| F80M.025.11 Collet Chuck ER 11 ultra short HSK-F80M |
| F80M.025.16 Collet Chuck ER 16 ultra short HSK-F80M |
| F80M.025.20 Collet Chuck ER 20 ultra short HSK-F80M |
| F80M.025.25 Collet Chuck ER 25 ultra short HSK-F80M |
| F80M.025.32 Collet Chuck ER 32 ultra short HSK-F80M |
| F80M.025.40 Collet Chuck ER 40 ultra short HSK-F80M |
| F80M.145.20.5 Shrink Fit Chuck Standard D-20 mm ultra short HSK-F80M |
| F80M.145.25.5 Shrink Fit Chuck Standard D-25 mm ultra short HSK-F80M |
| F80M.145.06 Shrink Fit Chuck Standard D-6 mm ultra short HSK-F80M |
| F80M.145.08 Shrink Fit Chuck Standard D-8 mm ultra short HSK-F80M |
| F80M.145.10 Shrink Fit Chuck Standard D-10 mm ultra short HSK-F80M |
| F80M.145.12 Shrink Fit Chuck Standard D-12 mm ultra short HSK-F80M |
| F80M.145.14 Shrink Fit Chuck Standard D-14 mm ultra short HSK-F80M |
| F80M.145.16 Shrink Fit Chuck Standard D-16 mm ultra short HSK-F80M |
| F80M.145.20 Shrink Fit Chuck Standard D-20 mm ultra short HSK-F80M |
| F80M.145.25 Shrink Fit Chuck Standard D-25 mm ultra short HSK-F80M |
| CC6.000.06 Weldon Tool Holder D-6 mm short PSC 63 |
| CC6.000.08 Weldon Tool Holder D-8 mm short PSC 63 |
| CC6.000.10 Weldon Tool Holder D-10 mm short PSC 63 |
| CC6.000.12 Weldon Tool Holder D-12 mm short PSC 63 |
| CC6.000.14 Weldon Tool Holder D-14 mm short PSC 63 |
| CC6.000.16 Weldon Tool Holder D-16 mm short PSC 63 |
| CC6.000.18 Weldon Tool Holder D-18 mm short PSC 63 |
| CC6.000.20 Weldon Tool Holder D-20 mm short PSC 63 |
| CC6.000.25 Weldon Tool Holder D-25 mm short PSC 63 |
| CC6.000.32 Weldon Tool Holder D-32 mm short PSC 63 |
| CC6.000.40 Weldon Tool Holder D-40 mm short PSC 63 |
| CC6.025.16 Collet Chuck ER 16 ultra short PSC 63 |
| CC6.025.20 Collet Chuck ER 20 ultra short PSC 63 |
| CC6.025.25 Collet Chuck ER 25 ultra short PSC 63 |
| CC6.025.32 Collet Chuck ER 32 ultra short PSC 63 |
| CC6.025.40 Collet Chuck ER 40 ultra short PSC 63 |
| CC6.021.16 Collet Chuck ER 16 long PSC 63 |
| CC6.021.20 Collet Chuck ER 20 long PSC 63 |
| CC6.021.25 Collet Chuck ER 25 long PSC 63 |
| CC6.021.32 Collet Chuck ER 32 long PSC 63 |
| CC6.021.40 Collet Chuck ER 40 long PSC 63 |
| CC6.024.16 Collet Chuck ER 16 ZG130 PSC 63 |
| CC6.024.20 Collet Chuck ER 20 ZG130 PSC 63 |
| CC6.024.25 Collet Chuck ER 25 ZG130 PSC 63 |
| CC6.024.32 Collet Chuck ER 32 ZG130 PSC 63 |
| CC6.024.40 Collet Chuck ER 40 ZG130 PSC 63 |
| CC6.022.16 Collet Chuck ER 16 oversize PSC 63 |
| CC6.022.20 Collet Chuck ER 20 oversize PSC 63 |
| CC6.022.25 Collet Chuck ER 25 oversize PSC 63 |
| CC6.022.32 Collet Chuck ER 32 oversize PSC 63 |
| CC6.022.40 Collet Chuck ER 40 oversize PSC 63 |
| CC6.024.16.3 Power Collet Chuck ER 16 oversize PSC 63 |
| CC6.024.25.3 Power Collet Chuck ER 25 oversize PSC 63 |
| CC6.024.32.3 Power Collet Chuck ER 32 oversize PSC 63 |
| CC6.024.16.3.HP High Precision Collet Chuck ER 16 oversize PSC 63 |
| CC6.024.25.3.HP High Precision Collet Chuck ER 25 oversize PSC 63 |
| CC6.024.32.3.HP High Precision Collet Chuck ER 32 oversize PSC 63 |
| CC6.021.11.7 Collet Chuck Mini ER 11 long PSC 63 |
| CC6.021.16.7 Collet Chuck Mini ER 16 long PSC 63 |
| CC6.022.11.7 Collet Chuck Mini ER 11 oversize PSC 63 |
| CC6.022.16.7 Collet Chuck Mini ER 11 oversize PSC 63 |
| CC6.050.16.KKB Face Mill Arbor D-16 mm short PSC 63 |
| CC6.050.22.KKB Face Mill Arbor D-22 mm short PSC 63 |
| CC6.050.27.KKB Face Mill Arbor D-27 mm short PSC 63 |
| CC6.050.32.KKB Face Mill Arbor D-32 mm short PSC 63 |
| CC6.050.40.KKB Face Mill Arbor D-40 mm short PSC 63 |
| CC6.140.03 Shrink Fit Chuck Standard D-3 mm short PSC 63 |
| CC6.140.04 Shrink Fit Chuck Standard D-4 mm short PSC 63 |
| CC6.140.05 Shrink Fit Chuck Standard D-5 mm short PSC 63 |
| CC6.140.06 Shrink Fit Chuck Standard D-6 mm short PSC 63 |
| CC6.140.08 Shrink Fit Chuck Standard D-8 mm short PSC 63 |
| CC6.140.10 Shrink Fit Chuck Standard D-10 mm short PSC 63 |
| CC6.140.12 Shrink Fit Chuck Standard D-12 mm short PSC 63 |
| CC6.140.14 Shrink Fit Chuck Standard D-14 mm short PSC 63 |
| CC6.140.16 Shrink Fit Chuck Standard D-16 mm short PSC 63 |
| CC6.140.18 Shrink Fit Chuck Standard D-18 mm short PSC 63 |
| CC6.140.20 Shrink Fit Chuck Standard D-20 mm short PSC 63 |
| CC6.140.25 Shrink Fit Chuck Standard D-25 mm short PSC 63 |
| CC6.140.32 Shrink Fit Chuck Standard D-32 mm short PSC 63 |
| CC6.141.06 Shrink Fit Chuck Standard D-6 mm long PSC 63 |
| CC6.141.08 Shrink Fit Chuck Standard D-8 mm long PSC 63 |
| CC6.141.10 Shrink Fit Chuck Standard D-10 mm long PSC 63 |
| CC6.141.12 Shrink Fit Chuck Standard D-12 mm long PSC 63 |
| CC6.141.14 Shrink Fit Chuck Standard D-14 mm long PSC 63 |
| CC6.141.16 Shrink Fit Chuck Standard D-16 mm long PSC 63 |
| CC6.141.18 Shrink Fit Chuck Standard D-18 mm long PSC 63 |
| CC6.141.20 Shrink Fit Chuck Standard D-20 mm long PSC 63 |
| CC6.147.06 Shrink Fit Chuck Standard D-6 mm ZG120 PSC 63 |
| CC6.147.08 Shrink Fit Chuck Standard D-8 mm ZG120 PSC 63 |
| CC6.147.10 Shrink Fit Chuck Standard D-10 mm ZG120 PSC 63 |
| CC6.147.16 Shrink Fit Chuck Standard D-16 mm ZG120 PSC 63 |
| CC6.147.20 Shrink Fit Chuck Standard D-20 mm ZG120 PSC 63 |
| CC6.144.06 Shrink Fit Chuck Standard D-6 mm ZG130 PSC 63 |
| CC6.144.08 Shrink Fit Chuck Standard D-8 mm ZG130 PSC 63 |
| CC6.144.10 Shrink Fit Chuck Standard D-10 mm ZG130 PSC 63 |
| CC6.144.12 Shrink Fit Chuck Standard D-12 mm ZG130 PSC 63 |
| CC6.144.14 Shrink Fit Chuck Standard D-14 mm ZG130 PSC 63 |
| CC6.144.16 Shrink Fit Chuck Standard D-16 mm ZG130 PSC 63 |
| CC6.144.18 Shrink Fit Chuck Standard D-18 mm ZG130 PSC 63 |
| CC6.144.20 Shrink Fit Chuck Standard D-20 mm ZG130 PSC 63 |
| CC6.144.25 Shrink Fit Chuck Standard D-25 mm ZG130 PSC 63 |
| CC6.144.32 Shrink Fit Chuck Standard D-32 mm ZG130 PSC 63 |
| CC6.142.06 Shrink Fit Chuck Standard D-6 mm oversize PSC 63 |
| CC6.142.08 Shrink Fit Chuck Standard D-8 mm oversize PSC 63 |
| CC6.142.10 Shrink Fit Chuck Standard D-10 mm oversize PSC 63 |
| CC6.142.12 Shrink Fit Chuck Standard D-12 mm oversize PSC 63 |
| CC6.142.14 Shrink Fit Chuck Standard D-14 mm oversize PSC 63 |
| CC6.142.16 Shrink Fit Chuck Standard D-16 mm oversize PSC 63 |
| CC6.142.18 Shrink Fit Chuck Standard D-18 mm oversize PSC 63 |
| CC6.142.20 Shrink Fit Chuck Standard D-20 mm oversize PSC 63 |
| CC6.142.25 Shrink Fit Chuck Standard D-25 mm oversize PSC 63 |
| CC6.142.32 Shrink Fit Chuck Standard D-32 mm oversize PSC 63 |
| CC6.145.06.3 Power Shrink Chuck D-6 mm ultra short PSC 63 |
| CC6.145.08.3 Power Shrink Chuck D-8 mm ultra short PSC 63 |
| CC6.145.10.3 Power Shrink Chuck D-10 mm ultra short PSC 63 |
| CC6.145.10.37 Power Shrink Chuck with Safe-Lock D-10 mm ultra short PSC 63 |
| CC6.145.12.3 Power Shrink Chuck D-12 mm ultra short PSC 63 |
| CC6.145.12.37 Power Shrink Chuck with Safe-Lock D-12 mm ultra short PSC 63 |
| CC6.145.14.3 Power Shrink Chuck D-14 mm ultra short PSC 63 |
| CC6.145.16.3 Power Shrink Chuck D-16 mm ultra short PSC 63 |
| CC6.145.16.37 Power Shrink Chuck with Safe-Lock D-16 mm ultra short PSC 63 |
| CC6.145.18.3 Power Shrink Chuck D-18 mm ultra short PSC 63 |
| CC6.145.20.3 Power Shrink Chuck D-20 mm ultra short PSC 63 |
| CC6.145.20.37 Power Shrink Chuck with Safe-Lock D-20 mm ultra short PSC 63 |
| CC6.145.25.3 Power Shrink Chuck D-25 mm ultra short PSC 63 |
| CC6.145.32.3 Power Shrink Chuck D-32 mm ultra short PSC 63 |
| CC6.144.06.3 Power Shrink Chuck D-6 mm ZG130 PSC 63 |
| CC6.144.08.3 Power Shrink Chuck D-8 mm ZG130 PSC 63 |
| CC6.144.10.3 Power Shrink Chuck D-10 mm ZG130 PSC 63 |
| CC6.144.10.37 Power Shrink Chuck with Safe-Lock D-10 mm ZG130 PSC 63 |
| CC6.144.12.3 Power Shrink Chuck D-12 mm ZG130 PSC 63 |
| CC6.144.12.37 Power Shrink Chuck with Safe-Lock D-12 mm ZG130 PSC 63 |
| CC6.144.16.3 Power Shrink Chuck D-16 mm ZG130 PSC 63 |
| CC6.144.16.37 Power Shrink Chuck with Safe-Lock D-16 mm ZG130 PSC 63 |
| CC6.144.20.3 Power Shrink Chuck D-20 mm ZG130 PSC 63 |
| CC6.144.20.37 Power Shrink Chuck with Safe-Lock D-20 mm ZG130 PSC 63 |
| 77.160.03 Mini Shrink Fit Extension (extra slim) from 16 to 3 |
| 77.160.04 Mini Shrink Fit Extension (extra slim) from 16 to 4 |
| 77.160.05 Mini Shrink Fit Extension (extra slim) from 16 to 5 |
| 77.200.06 Mini Shrink Fit Extension (extra slim) from 20 to 6 |
| 77.200.08 Mini Shrink Fit Extension (extra slim) from 20 to 8 |
| 77.200.10 Mini Shrink Fit Extension (extra slim) from 20 to 10 |
| 77.200.12 Mini Shrink Fit Extension (extra slim) from 20 to 12 |
| 77.160.06 Mini Shrink Fit Extension (extra slim) from 16 to 6 |
| 77.160.08 Mini Shrink Fit Extension (extra slim) from 16 to 8 |
| 77.160.10 Mini Shrink Fit Extension (extra slim) from 16 to 10 |
| 77.162.03 Mini Shrink Fit Extension from 16 to 3 |
| 77.162.04 Mini Shrink Fit Extension from 16 to 4 |
| 77.162.05 Mini Shrink Fit Extension from 16 to 5 |
| 77.202.06 Mini Shrink Fit Extension from 20 to 6 |
| 77.202.08 Mini Shrink Fit Extension from 20 to 8 |
| 77.202.10 Mini Shrink Fit Extension from 20 to 10 |
| 77.202.12 Mini Shrink Fit Extension from 20 to 12 |
| 77.162.06 Mini Shrink Fit Extension from 16 to 6 |
| 77.162.08 Mini Shrink Fit Extension from 16 to 8 |
| 77.162.10 Mini Shrink Fit Extension from 16 to 10 |
| 78.120.03.1 Shrink Fit Extension from 12 to 3 |
| 78.120.03.2 Shrink Fit Extension from 12 to 3;with slits |
| 78.120.04.1 Shrink Fit Extension from 12 to 4 |
| 78.120.04.2 Shrink Fit Extension from 12 to 4;with slits |
| 78.160.03.1 Shrink Fit Extension from 16 to 3 |
| 78.160.03.2 Shrink Fit Extension from v 16 to 3;with slits |
| 78.160.04.1 Shrink Fit Extension from 16 to 4 |
| 78.160.04.2 Shrink Fit Extension from 16 to 4;with slits |
| 78.160.05.1 Shrink Fit Extension from 16 to 5 |
| 78.160.05.2 Shrink Fit Extension from 16 to 5;with slits |
| 78.160.06.1 Shrink Fit Extension from 16 to 6 |
| 78.161.06.1 Shrink Fit Extension from 16 to 6;300 mm long |
| 78.200.05.1 Shrink Fit Extension from 20 to 5 |
| 78.200.05.2 Shrink Fit Extension from 20 to 5;with slits |
| 78.200.06.1 Shrink Fit Extension from 20 to 6 |
| 78.201.06.1 Shrink Fit Extension from 20 to 6;300 mm long |
| 78.200.08.1 Shrink Fit Extension from 20 to 8 |
| 78.201.08.1 Shrink Fit Extension from 20 to 8;300 mm long |
| 78.250.08.1 Shrink Fit Extension from 25 to 8 |
| 78.251.08.1 Shrink Fit Extension from 25 to 8;300 mm long |
| 78.250.10.1 Shrink Fit Extension from 25 to 10 |
| 78.251.10.1 Shrink Fit Extension from 25 to 10;300 mm long |
| 78.250.12.1 Shrink Fit Extension from 25 to 12 |
| 78.251.12.1 Shrink Fit Extension from 25 to 12;300 mm long |
| 78.250.14.1 Shrink Fit Extension from 25 to 14 |
| 78.251.14.1 Shrink Fit Extension from 25 to 14;300 mm long |
| 78.250.16.1 Shrink Fit Extension from 25 to 16 |
| 78.251.16.1 Shrink Fit Extension from 25 to 16;300 mm long |
| 78.320.10.1 Shrink Fit Extension from 32 to 10 |
| 78.321.10.1 Shrink Fit Extension from 32 to 10;300 mm long |
| 78.320.12.1 Shrink Fit Extension from 32 to 12 |
| 78.321.12.1 Shrink Fit Extension from 32 to 12;300 mm long |
| 78.320.14.1 Shrink Fit Extension from 32 to 14 |
| 78.321.14.1 Shrink Fit Extension from 32 to 14;300 mm long |
| 78.320.16.1 Shrink Fit Extension from 32 to 16 |
| 78.321.16.1 Shrink Fit Extension from 32 to 16;300 mm long |
| 78.320.18.1 Shrink Fit Extension from 32 to 18 |
| 78.320.20.1 Shrink Fit Extension from 32 to 20 |
| 78.501.10.1 Shrink Fit Extension from 50 to 10;300 mm long |
| 78.501.12.1 Shrink Fit Extension from 50 to 12;300 mm long |
| 78.501.14.1 Shrink Fit Extension from 50 to 14;300 mm long |
| 78.501.16.1 Shrink Fit Extension from 50 to 16;300 mm long |
| 78.501.18.1 Shrink Fit Extension from 50 to 18;300 mm long |
| 78.501.20.1 Shrink Fit Extension from 50 to 20;300 mm long |
| 78.501.25.1 Shrink Fit Extension from 50 to 25;300 mm long |
| 78.501.32.1 Shrink Fit Extension from 50 to 32;300 mm long |
| 78.160.06 Shrink Fit Extension from 16 to 6 |
| 78.200.06 Shrink Fit Extension from 20 to 6 |
| 78.200.08 Shrink Fit Extension from 20 to 8 |
| 78.250.08 Shrink Fit Extension from 25 to 8 |
| 78.250.10 Shrink Fit Extension from 25 to 10 |
| 78.250.12 Shrink Fit Extension from 25 to 12 |
| 78.250.14 Shrink Fit Extension from 25 to 14 |
| 78.250.16 Shrink Fit Extension from 25 to 16 |
| 78.320.10 Shrink Fit Extension from 32 to 10 |
| 78.320.12 Shrink Fit Extension from 32 to 12 |
| 78.320.14 Shrink Fit Extension from 32 to 14 |
| 78.320.16 Shrink Fit Extension from 32 to 16 |
| 78.320.18 Shrink Fit Extension from 32 to 18 |
| 78.320.20 Shrink Fit Extension from 32 to 20 |
| 78.502.16 Heavy Duty Shrink Fit Extension D-16 mm;400 mm long |
| 78.502.16.9 Heavy Duty Shrink Fit Extension D-16 mm;400 mm long (with solid carbide core) |
| 78.502.20 Heavy Duty Shrink Fit Extension D-20 mm;400 mm long |
| 78.502.20.9 Heavy Duty Shrink Fit Extension D-20 mm;400 mm long (with solid carbide core) |
| 78.502.25 Heavy Duty Shrink Fit Extension D-25 mm;400 mm long |
| 78.502.25.9 Heavy Duty Shrink Fit Extension D-25 mm;400 mm long (with solid carbide core) |
| 78.506.16 Heavy Duty Shrink Fit Extension D-16 mm;600 mm long |
| 78.506.16.9 Heavy Duty Shrink Fit Extension D-16 mm;600 mm long (with solid carbide core) |
| 78.506.20 Heavy Duty Shrink Fit Extension D-20 mm;600 mm long |
| 78.506.20.9 Heavy Duty Shrink Fit Extension D-20 mm;600 mm long (with solid carbide core) |
| 78.506.25 Heavy Duty Shrink Fit Extension D-25 mm;600 mm long |
| 78.506.25.9 Heavy Duty Shrink Fit Extension D-25 mm;600 mm long (with solid carbide core) |
| F50.160.20.3 Grinding Wheel Adapter HSK-F50, 20, L = 50 for ISOG |
| F50.163.20.3 Grinding Wheel Adapter HSK-F50, 20, L = 60 for ISOG |
| F50.161.20.3 Grinding Wheel Adapter HSK-F50, 20, L = 90 for ISOG |
| E50.160.20.2 Grinding Wheel Adapter HSK-E50, 20, L = 49 for UWS (Reinecker) |
| E50.163.20.2 Grinding Wheel Adapter HSK-E50, 20, L = 74 for UWS (Reinecker) |
| E50.161.20.2 Grinding Wheel Adapter HSK-E50, 20, L = 109 for UWS (Reinecker) |
| E50.160.20.1 Grinding Wheel Adapter HSK-E50, 20, L = 49 for Rollomatic |
| E50.163.20.1 Grinding Wheel Adapter HSK-E50, 20, L = 81 for Rollomatic |
| C50.165.20.4 Grinding Wheel Adapter HSK-C50, 20, L = 40 for Walter |
| C50.167.20.4 Grinding Wheel Adapter HSK-C50, 20, L = 120 for Walter |
| Z50.165.20.5 Grinding Wheel Adapter Z50, 20, L = 40 for Walter |
| Z50.160.20.5 Grinding Wheel Adapter Z50, 20, L = 60 for Walter |
| Z50.163.20.5 Grinding Wheel Adapter Z50, 20, L = 85 for Walter |
| C50.165.20.6 Grinding Wheel Adapter HSK-C50, 20, L = 40 for Saacke/Sch tte/Vollmer |
| C50.160.20.6 Grinding Wheel Adapter HSK-C50, 20, L = 60 for Saacke/Sch tte/Vollmer |
| C50.168.20.6 Grinding Wheel Adapter HSK-C50, 20, L = 75 for Saacke/Sch tte/Vollmer |
| C50.163.20.6 Grinding Wheel Adapter HSK-C50, 20, L = 85 for Saacke/Sch tte/Vollmer |
| C50.161.20.6 Grinding Wheel Adapter HSK-C50, 20, L = 100 for Saacke/Sch tte/Vollmer |
| E50.165.20.8 Grinding Wheel Adapter HSK-E50, 20, L = 40 for Sch tte |
| E50.160.20.8 Grinding Wheel Adapter HSK-E50, 20, L = 55 for Sch tte |
| E50.163.20.8 Grinding Wheel Adapter HSK-E50, 20, L = 85 for Sch tte |
| A50.165.Z50.5 Adapter HSK-A50 for Walter/Haas |
| A50.165.Z50.7 Adapter HSK-A50 for Saacke |
| A50.165.Z50.9 Adapter HSK-A50 for Strausak Promat |
| A50.165.Z50.10 Adapter HSK-A50 for Strausak Fleximat |
| A50.165.Z50.11 Adapter HSK-A50 for Anca |
| A50.165.Z50.12 Adapter HSK-A50 for Rollomatic PerfectArbor |
| 999001-1155 Spacer 35 x 20 x 3 |
| 999001-1156 Spacer 35 x 20 x 6 |
| 999001-1157 Spacer 35 x 20 x 12 (incl. balancing thread) |
| 999001-1135 Spacer 40 x 20 x 3 |
| 999001-1136 Spacer 40 x 20 x 6 |
| 999001-1137 Spacer 40 x 20 x 12 (incl. balancing thread) |
| 999001-1149 Spacer 40 x 3/4″ x 3 |
| 999001-1150 Spacer 40 x 3/4″ x 6 |
| 999001-1151 Spacer 40 x 3/4″ x 12 (incl. balancing thread) |
| 999001-1139 Spacer 50 x 20 x 3 |
| 999001-1140 Spacer 50 x 20 x 6 |
| 999001-1138 Spacer 50 x 20 x 12 (incl. balancing thread) |
| 999001-1153 Spacer 55 x 1 1/4″ x 3 |
| 999001-1154 Spacer 55 x 1 1/4″ x 6 |
| 999001-1152 Spacer 55 x 1 1/4″ x 12 (incl. balancing thread) |
| 999001-1134 Lock plate 35 x 20 x 1,5 |
| 915005-0004 Clamping nut M20 x 1 |
| 915005-0001 Clamping nut M20 x 1,5 (only Rollomatic + Reinecker) |
| 900052-0007 Sealing pin POM white M8 x 12 |
| 84.600.01 Torque Wrench |
| 84.600.01.S Torque Master Torque wrench without suitcase |
| 84.630.1/2Z Torque Wrench Adapter — square socket inserts 1/2″ |
| 915005-0005 Box nut 4-KM4 |
| F4002NNL0200CA- Power HAIMER Mill Z2 Alu End Mill — F4002NNL;with Safe-Lock Shank, Cutting D1 = 2,00 |
| F4002NNL0200CAC Power HAIMER Mill Z2 Alu End Mill — F4002NNL;with Safe-Lock Shank, with Coating;Cutting D1 = 2,00 |
| F4002NNL0300CA- Power HAIMER Mill Z2 Alu End Mill — F4002NNL;with Safe-Lock Shank, Cutting D1 = 3,00 |
| F4002NNL0300CAC Power HAIMER Mill Z2 Alu End Mill — F4002NNL;with Safe-Lock Shank, with Coating;Cutting D1 = 3,00 |
| F4002NNL0400CA- Power HAIMER Mill Z2 Alu End Mill — F4002NNL;with Safe-Lock Shank, Cutting D1 = 4,00 |
| F4002NNL0400CAC Power HAIMER Mill Z2 Alu End Mill — F4002NNL;with Safe-Lock Shank, with Coating;Cutting D1 = 4,00 |
| F4002NNL0500CA- Power HAIMER Mill Z2 Alu End Mill — F4002NNL;with Safe-Lock Shank, Cutting D1 = 5,00 |
| F4002NNL0500CAC Power HAIMER Mill Z2 Alu End Mill — F4002NNL;with Safe-Lock Shank, with Coating;Cutting D1 = 5,00 |
| F4002NNL0600CA- Power HAIMER Mill Z2 Alu End Mill — F4002NNL;with Safe-Lock Shank, Cutting D1 = 6,00 |
| F4002NNL0600CAC Power HAIMER Mill Z2 Alu End Mill — F4002NNL;with Safe-Lock Shank, with Coating;Cutting D1 = 6,00 |
| F4002NNL0800CA- Power HAIMER Mill Z2 Alu End Mill — F4002NNL;with Safe-Lock Shank, Cutting D1 = 8,00 |
| F4002NNL0800CAC Power HAIMER Mill Z2 Alu End Mill — F4002NNL;with Safe-Lock Shank, with Coating;Cutting D1 = 8,00 |
| F4002NNL1000CA- Power HAIMER Mill Z2 Alu End Mill — F4002NNL;with Safe-Lock Shank, Cutting D1 = 10,00 |
| F4002NNL1000CAC Power HAIMER Mill Z2 Alu End Mill — F4002NNL;with Safe-Lock Shank, with Coating;Cutting D1 = 10,00 |
| F4002NNL1200CA- Power HAIMER Mill Z2 Alu End Mill — F4002NNL;with Safe-Lock Shank, Cutting D1 = 12,00 |
| F4002NNL1200CAC Power HAIMER Mill Z2 Alu End Mill — F4002NNL;with Safe-Lock Shank, with Coating;Cutting D1 = 12,00 |
| F4002NNL1400CA- Power HAIMER Mill Z2 Alu End Mill — F4002NNL;with Safe-Lock Shank, Cutting D1 = 14,00 |
| F4002NNL1400CAC Power HAIMER Mill Z2 Alu End Mill — F4002NNL;with Safe-Lock Shank, with Coating;Cutting D1 = 14,00 |
| F4002NNL1600CA- Power HAIMER Mill Z2 Alu End Mill — F4002NNL;with Safe-Lock Shank, Cutting D1 = 16,00 |
| F4002NNL1600CAC Power HAIMER Mill Z2 Alu End Mill — F4002NNL;with Safe-Lock Shank, with Coating;Cutting D1 = 16,00 |
| F4002NNL1800CA- Power HAIMER Mill Z2 Alu End Mill — F4002NNL;with Safe-Lock Shank, Cutting D1 = 18,00 |
| F4002NNL1800CAC Power HAIMER Mill Z2 Alu End Mill — F4002NNL;with Safe-Lock Shank, with Coating;Cutting D1 = 18,00 |
| F4002NNL2000CA- Power HAIMER Mill Z2 Alu End Mill — F4002NNL;with Safe-Lock Shank, Cutting D1 = 20,00 |
| F4002NNL2000CAC Power HAIMER Mill Z2 Alu End Mill — F4002NNL;with Safe-Lock Shank, with Coating;Cutting D1 = 20,00 |
| F4002NNH0200CA- Power HAIMER Mill Z2 Alu End Mill — F4002NNH;with Straight Shank, Cutting D1 = 2,00 |
| F4002NNH0300CA- Power HAIMER Mill Z2 Alu End Mill — F4002NNH;with Straight Shank, Cutting D1 = 3,00 |
| F4002NNH0400CA- Power HAIMER Mill Z2 Alu End Mill — F4002NNH;with Straight Shank, Cutting D1 = 4,00 |
| F4002NNH0500CA- Power HAIMER Mill Z2 Alu End Mill — F4002NNH;with Straight Shank, Cutting D1 = 5,00 |
| F4002NNH0600CA- Power HAIMER Mill Z2 Alu End Mill — F4002NNH;with Straight Shank, Cutting D1 = 6,00 |
| F4002NNH0800CA- Power HAIMER Mill Z2 Alu End Mill — F4002NNH;with Straight Shank, Cutting D1 = 8,00 |
| F4002NNH1000CA- Power HAIMER Mill Z2 Alu End Mill — F4002NNH;with Straight Shank, Cutting D1 = 10,00 |
| F4002NNH1200CA- Power HAIMER Mill Z2 Alu End Mill — F4002NNH;with Straight Shank, Cutting D1 = 12,00 |
| F4002NNH1400CA- Power HAIMER Mill Z2 Alu End Mill — F4002NNH;with Straight Shank, Cutting D1 = 14,00 |
| F4002NNH1600CA- Power HAIMER Mill Z2 Alu End Mill — F4002NNH;with Straight Shank, Cutting D1 = 16,00 |
| F4002NNH1800CA- Power HAIMER Mill Z2 Alu End Mill — F4002NNH;with Straight Shank, Cutting D1 = 18,00 |
| F4002NNH2000CA- Power HAIMER Mill Z2 Alu End Mill — F4002NNH;with Straight Shank, Cutting D1 = 20,00 |
| F4002NNB0200CA- Power HAIMER Mill Z2 Alu End Mill — F4002NNB;with Weldon Shank, Cutting D1 = 2,00 |
| F4002NNB0300CA- Power HAIMER Mill Z2 Alu End Mill — F4002NNB;with Weldon Shank, Cutting D1 = 3,00 |
| F4002NNB0400CA- Power HAIMER Mill Z2 Alu End Mill — F4002NNB;with Weldon Shank, Cutting D1 = 4,00 |
| F4002NNB0500CA- Power HAIMER Mill Z2 Alu End Mill — F4002NNB;with Weldon Shank, Cutting D1 = 5,00 |
| F4002NNB0600CA- Power HAIMER Mill Z2 Alu End Mill — F4002NNB;with Weldon Shank, Cutting D1 = 6,00 |
| F4002NNB0800CA- Power HAIMER Mill Z2 Alu End Mill — F4002NNB;with Weldon Shank, Cutting D1 = 8,00 |
| F4002NNB1000CA- Power HAIMER Mill Z2 Alu End Mill — F4002NNB;with Weldon Shank, Cutting D1 = 10,00 |
| F4002NNB1200CA- Power HAIMER Mill Z2 Alu End Mill — F4002NNB;with Weldon Shank, Cutting D1 = 12,00 |
| F4002NNB1400CA- Power HAIMER Mill Z2 Alu End Mill — F4002NNB;with Weldon Shank, Cutting D1 = 14,00 |
| F4002NNB1600CA- Power HAIMER Mill Z2 Alu End Mill — F4002NNB;with Weldon Shank, Cutting D1 = 16,00 |
| F4002NNB1800CA- Power HAIMER Mill Z2 Alu End Mill — F4002NNB;with Weldon Shank, Cutting D1 = 18,00 |
| F4002NNB2000CA- Power HAIMER Mill Z2 Alu End Mill — F4002NNB;with Weldon Shank, Cutting D1 = 20,00 |
| V4002NNL0200RA- Power HAIMER Mill Z2 Alu Ball Nose — V4002NNL;with Safe-Lock Shank, Cutting D1 = 2,00 |
| V4002NNL0200RAC Power HAIMER Mill Z2 Alu Ball Nose — V4002NNL;with Safe-Lock Shank, with Coating;Cutting D1 = 2,00 |
| V4002NNL0300RA- Power HAIMER Mill Z2 Alu Ball Nose — V4002NNL;with Safe-Lock Shank, Cutting D1 = 3,00 |
| V4002NNL0300RAC Power HAIMER Mill Z2 Alu Ball Nose — V4002NNL;with Safe-Lock Shank, with Coating;Cutting D1 = 3,00 |
| V4002NNL0400RA- Power HAIMER Mill Z2 Alu Ball Nose — V4002NNL;with Safe-Lock Shank, Cutting D1 = 4,00 |
| V4002NNL0400RAC Power HAIMER Mill Z2 Alu Ball Nose — V4002NNL;with Safe-Lock Shank, with Coating;Cutting D1 = 4,00 |
| V4002NNL0500RA- Power HAIMER Mill Z2 Alu Ball Nose — V4002NNL;with Safe-Lock Shank, Cutting D1 = 5,00 |
| V4002NNL0500RAC Power HAIMER Mill Z2 Alu Ball Nose — V4002NNL;with Safe-Lock Shank, with Coating;Cutting D1 = 5,00 |
| V4002NNL0600RA- Power HAIMER Mill Z2 Alu Ball Nose — V4002NNL;with Safe-Lock Shank, Cutting D1 = 6,00 |
| V4002NNL0600RAC Power HAIMER Mill Z2 Alu Ball Nose — V4002NNL;with Safe-Lock Shank, with Coating;Cutting D1 = 6,00 |
| V4002NNL0800RA- Power HAIMER Mill Z2 Alu Ball Nose — V4002NNL;with Safe-Lock Shank, Cutting D1 = 8,00 |
| V4002NNL0800RAC Power HAIMER Mill Z2 Alu Ball Nose — V4002NNL;with Safe-Lock Shank, with Coating;Cutting D1 = 8,00 |
| V4002NNL1000RA- Power HAIMER Mill Z2 Alu Ball Nose — V4002NNL;with Safe-Lock Shank, Cutting D1 = 10,00 |
| V4002NNL1000RAC Power HAIMER Mill Z2 Alu Ball Nose — V4002NNL;with Safe-Lock Shank, with Coating;Cutting D1 = 10,00 |
| V4002NNL1200RA- Power HAIMER Mill Z2 Alu Ball Nose — V4002NNL;with Safe-Lock Shank, Cutting D1 = 12,00 |
| V4002NNL1200RAC Power HAIMER Mill Z2 Alu Ball Nose — V4002NNL;with Safe-Lock Shank, with Coating;Cutting D1 = 12,00 |
| V4002NNL1400RA- Power HAIMER Mill Z2 Alu Ball Nose — V4002NNL;with Safe-Lock Shank, Cutting D1 = 14,00 |
| V4002NNL1400RAC Power HAIMER Mill Z2 Alu Ball Nose — V4002NNL;with Safe-Lock Shank, with Coating;Cutting D1 = 14,00 |
| V4002NNL1600RA- Power HAIMER Mill Z2 Alu Ball Nose — V4002NNL;with Safe-Lock Shank, Cutting D1 = 16,00 |
| V4002NNL1600RAC Power HAIMER Mill Z2 Alu Ball Nose — V4002NNL;with Safe-Lock Shank, with Coating;Cutting D1 = 16,00 |
| V4002NNL1800RA- Power HAIMER Mill Z2 Alu Ball Nose — V4002NNL;with Safe-Lock Shank, Cutting D1 = 18,00 |
| V4002NNL1800RAC Power HAIMER Mill Z2 Alu Ball Nose — V4002NNL;with Safe-Lock Shank, with Coating;Cutting D1 = 18,00 |
| V4002NNL2000RA- Power HAIMER Mill Z2 Alu Ball Nose — V4002NNL;with Safe-Lock Shank, Cutting D1 = 20,00 |
| V4002NNL2000RAC Power HAIMER Mill Z2 Alu Ball Nose — V4002NNL;with Safe-Lock Shank, with Coating;Cutting D1 = 20,00 |
| V4002NNH0200RA- Power HAIMER Mill Z2 Alu Ball Nose — V4002NNH;with Straight Shank, Cutting D1 = 2,00 |
| V4002NNH0300RA- Power HAIMER Mill Z2 Alu Ball Nose — V4002NNH;with Straight Shank, Cutting D1 = 3,00 |
| V4002NNH0400RA- Power HAIMER Mill Z2 Alu Ball Nose — V4002NNH;with Straight Shank, Cutting D1 = 4,00 |
| V4002NNH0500RA- Power HAIMER Mill Z2 Alu Ball Nose — V4002NNH;with Straight Shank, Cutting D1 = 5,00 |
| V4002NNH0600RA- Power HAIMER Mill Z2 Alu Ball Nose — V4002NNH;with Straight Shank, Cutting D1 = 6,00 |
| V4002NNH0800RA- Power HAIMER Mill Z2 Alu Ball Nose — V4002NNH;with Straight Shank, Cutting D1 = 8,00 |
| V4002NNH1000RA- Power HAIMER Mill Z2 Alu Ball Nose — V4002NNH;with Straight Shank, Cutting D1 = 10,00 |
| V4002NNH1200RA- Power HAIMER Mill Z2 Alu Ball Nose — V4002NNH;with Straight Shank, Cutting D1 = 12,00 |
| V4002NNH1400RA- Power HAIMER Mill Z2 Alu Ball Nose — V4002NNH;with Straight Shank, Cutting D1 = 14,00 |
| V4002NNH1600RA- Power HAIMER Mill Z2 Alu Ball Nose — V4002NNH;with Straight Shank, Cutting D1 = 16,00 |
| V4002NNH1800RA- Power HAIMER Mill Z2 Alu Ball Nose — V4002NNH;with Straight Shank, Cutting D1 = 18,00 |
| V4002NNH2000RA- Power HAIMER Mill Z2 Alu Ball Nose — V4002NNH;with Straight Shank, Cutting D1 = 20,00 |
| V4002NNB0200RA- Power HAIMER Mill Z2 Alu Ball Nose — V4002NNB;with Weldon Shank, Cutting D1 = 2,00 |
| V4002NNB0300RA- Power HAIMER Mill Z2 Alu Ball Nose — V4002NNB;with Weldon Shank, Cutting D1 = 3,00 |
| V4002NNB0400RA- Power HAIMER Mill Z2 Alu Ball Nose — V4002NNB;with Weldon Shank, Cutting D1 = 4,00 |
| V4002NNB0500RA- Power HAIMER Mill Z2 Alu Ball Nose — V4002NNB;with Weldon Shank, Cutting D1 = 5,00 |
| V4002NNB0600RA- Power HAIMER Mill Z2 Alu Ball Nose — V4002NNB;with Weldon Shank, Cutting D1 = 6,00 |
| V4002NNB0800RA- Power HAIMER Mill Z2 Alu Ball Nose — V4002NNB;with Weldon Shank, Cutting D1 = 8,00 |
| V4002NNB1000RA- Power HAIMER Mill Z2 Alu Ball Nose — V4002NNB;with Weldon Shank, Cutting D1 = 10,00 |
| V4002NNB1200RA- Power HAIMER Mill Z2 Alu Ball Nose — V4002NNB;with Weldon Shank, Cutting D1 = 12,00 |
| V4002NNB1400RA- Power HAIMER Mill Z2 Alu Ball Nose — V4002NNB;with Weldon Shank, Cutting D1 = 14,00 |
| V4002NNB1600RA- Power HAIMER Mill Z2 Alu Ball Nose — V4002NNB;with Weldon Shank, Cutting D1 = 16,00 |
| V4002NNB1800RA- Power HAIMER Mill Z2 Alu Ball Nose — V4002NNB;with Weldon Shank, Cutting D1 = 18,00 |
| V4002NNB2000RA- Power HAIMER Mill Z2 Alu Ball Nose — V4002NNB;with Weldon Shank, Cutting D1 = 20,00 |
| F4003NNL0200CA- Power HAIMER Mill Z3 Alu End Mill — F4003NNL;with Safe-Lock Shank, Cutting D1 = 2,00 |
| F4003NNL0200CAC Power HAIMER Mill Z3 Alu End Mill — F4003NNL;with Safe-Lock Shank, with Coating;Cutting D1 = 2,00 |
| F4003NNL0300CA- Power HAIMER Mill Z3 Alu End Mill — F4003NNL;with Safe-Lock Shank, Cutting D1 = 3,00 |
| F4003NNL0300CAC Power HAIMER Mill Z3 Alu End Mill — F4003NNL;with Safe-Lock Shank, with Coating;Cutting D1 = 3,00 |
| F4003NNL0400CA- Power HAIMER Mill Z3 Alu End Mill — F4003NNL;with Safe-Lock Shank, Cutting D1 = 4,00 |
| F4003NNL0400CAC Power HAIMER Mill Z3 Alu End Mill — F4003NNL;with Safe-Lock Shank, with Coating;Cutting D1 = 4,00 |
| F4003NNL0500CA- Power HAIMER Mill Z3 Alu End Mill — F4003NNL;with Safe-Lock Shank, Cutting D1 = 5,00 |
| F4003NNL0500CAC Power HAIMER Mill Z3 Alu End Mill — F4003NNL;with Safe-Lock Shank, with Coating;Cutting D1 = 5,00 |
| F4003NNL0600CA- Power HAIMER Mill Z3 Alu End Mill — F4003NNL;with Safe-Lock Shank, Cutting D1 = 6,00 |
| F4003NNL0600CAC Power HAIMER Mill Z3 Alu End Mill — F4003NNL;with Safe-Lock Shank, with Coating;Cutting D1 = 6,00 |
| F4003NNL0800CA- Power HAIMER Mill Z3 Alu End Mill — F4003NNL;with Safe-Lock Shank, Cutting D1 = 8,00 |
| F4003NNL0800CAC Power HAIMER Mill Z3 Alu End Mill — F4003NNL;with Safe-Lock Shank, with Coating;Cutting D1 = 8,00 |
| F4003NNL1000CA- Power HAIMER Mill Z3 Alu End Mill — F4003NNL;with Safe-Lock Shank, Cutting D1 = 10,00 |
| F4003NNL1000CAC Power HAIMER Mill Z3 Alu End Mill — F4003NNL;with Safe-Lock Shank, with Coating;Cutting D1 = 10,00 |
| F4003NNL1200CA- Power HAIMER Mill Z3 Alu End Mill — F4003NNL;with Safe-Lock Shank, Cutting D1 = 12,00 |
| F4003NNL1200CAC Power HAIMER Mill Z3 Alu End Mill — F4003NNL;with Safe-Lock Shank, with Coating;Cutting D1 = 12,00 |
| F4003NNL1400CA- Power HAIMER Mill Z3 Alu End Mill — F4003NNL;with Safe-Lock Shank, Cutting D1 = 14,00 |
| F4003NNL1400CAC Power HAIMER Mill Z3 Alu End Mill — F4003NNL;with Safe-Lock Shank, with Coating;Cutting D1 = 14,00 |
| F4003NNL1600CA- Power HAIMER Mill Z3 Alu End Mill — F4003NNL;with Safe-Lock Shank, Cutting D1 = 16,00 |
| F4003NNL1600CAC Power HAIMER Mill Z3 Alu End Mill — F4003NNL;with Safe-Lock Shank, with Coating;Cutting D1 = 16,00 |
| F4003NNL1800CA- Power HAIMER Mill Z3 Alu End Mill — F4003NNL;with Safe-Lock Shank, Cutting D1 = 18,00 |
| F4003NNL1800CAC Power HAIMER Mill Z3 Alu End Mill — F4003NNL;with Safe-Lock Shank, with Coating;Cutting D1 = 18,00 |
| F4003NNL2000CA- Power HAIMER Mill Z3 Alu End Mill — F4003NNL;with Safe-Lock Shank, Cutting D1 = 20,00 |
| F4003NNL2000CAC Power HAIMER Mill Z3 Alu End Mill — F4003NNL;with Safe-Lock Shank, with Coating;Cutting D1 = 20,00 |
| F4003NNH0200CA- Power HAIMER Mill Z3 Alu End Mill — F4003NNH;with Straight Shank, Cutting D1 = 2,00 |
| F4003NNH0300CA- Power HAIMER Mill Z3 Alu End Mill — F4003NNH;with Straight Shank, Cutting D1 = 3,00 |
| F4003NNH0400CA- Power HAIMER Mill Z3 Alu End Mill — F4003NNH;with Straight Shank, Cutting D1 = 4,00 |
| F4003NNH0500CA- Power HAIMER Mill Z3 Alu End Mill — F4003NNH;with Straight Shank, Cutting D1 = 5,00 |
| F4003NNH0600CA- Power HAIMER Mill Z3 Alu End Mill — F4003NNH;with Straight Shank, Cutting D1 = 6,00 |
| F4003NNH0800CA- Power HAIMER Mill Z3 Alu End Mill — F4003NNH;with Straight Shank, Cutting D1 = 8,00 |
| F4003NNH1000CA- Power HAIMER Mill Z3 Alu End Mill — F4003NNH;with Straight Shank, Cutting D1 = 10,00 |
| F4003NNH1200CA- Power HAIMER Mill Z3 Alu End Mill — F4003NNH;with Straight Shank, Cutting D1 = 12,00 |
| F4003NNH1400CA- Power HAIMER Mill Z3 Alu End Mill — F4003NNH;with Straight Shank, Cutting D1 = 14,00 |
| F4003NNH1600CA- Power HAIMER Mill Z3 Alu End Mill — F4003NNH;with Straight Shank, Cutting D1 = 16,00 |
| F4003NNH1800CA- Power HAIMER Mill Z3 Alu End Mill — F4003NNH;with Straight Shank, Cutting D1 = 18,00 |
| F4003NNH2000CA- Power HAIMER Mill Z3 Alu End Mill — F4003NNH;with Straight Shank, Cutting D1 = 20,00 |
| F4003NNB0200CA- Power HAIMER Mill Z3 Alu End Mill — F4003NNB;with Weldon Shank, Cutting D1 = 2,00 |
| F4003NNB0300CA- Power HAIMER Mill Z3 Alu End Mill — F4003NNB;with Weldon Shank, Cutting D1 = 3,00 |
| F4003NNB0400CA- Power HAIMER Mill Z3 Alu End Mill — F4003NNB;with Weldon Shank, Cutting D1 = 4,00 |
| F4003NNB0500CA- Power HAIMER Mill Z3 Alu End Mill — F4003NNB;with Weldon Shank, Cutting D1 = 5,00 |
| F4003NNB0600CA- Power HAIMER Mill Z3 Alu End Mill — F4003NNB;with Weldon Shank, Cutting D1 = 6,00 |
| F4003NNB0800CA- Power HAIMER Mill Z3 Alu End Mill — F4003NNB;with Weldon Shank, Cutting D1 = 8,00 |
| F4003NNB1000CA- Power HAIMER Mill Z3 Alu End Mill — F4003NNB;with Weldon Shank, Cutting D1 = 10,00 |
| F4003NNB1200CA- Power HAIMER Mill Z3 Alu End Mill — F4003NNB;with Weldon Shank, Cutting D1 = 12,00 |
| F4003NNB1400CA- Power HAIMER Mill Z3 Alu End Mill — F4003NNB;with Weldon Shank, Cutting D1 = 14,00 |
| F4003NNB1600CA- Power HAIMER Mill Z3 Alu End Mill — F4003NNB;with Weldon Shank, Cutting D1 = 16,00 |
| F4003NNB1800CA- Power HAIMER Mill Z3 Alu End Mill — F4003NNB;with Weldon Shank, Cutting D1 = 18,00 |
| F4003NNB2000CA- Power HAIMER Mill Z3 Alu End Mill — F4003NNB;with Weldon Shank, Cutting D1 = 20,00 |
| V1002NNL0200RAA Power HAIMER Mill Uni Z2 Ball Nose — V1002NNL;with Safe-Lock Shank, Cutting D1 = 2,00 |
| V1002NNL0300RAA Power HAIMER Mill Uni Z2 Ball Nose — V1002NNL;with Safe-Lock Shank, Cutting D1 = 3,00 |
| V1002NNL0400RAA Power HAIMER Mill Uni Z2 Ball Nose — V1002NNL;with Safe-Lock Shank, Cutting D1 = 4,00 |
| V1002NNL0500RAA Power HAIMER Mill Uni Z2 Ball Nose — V1002NNL;with Safe-Lock Shank, Cutting D1 = 5,00 |
| V1002NNL0600RAA Power HAIMER Mill Uni Z2 Ball Nose — V1002NNL;with Safe-Lock Shank, Cutting D1 = 6,00 |
| V1002NNL0800RAA Power HAIMER Mill Uni Z2 Ball Nose — V1002NNL;with Safe-Lock Shank, Cutting D1 = 8,00 |
| V1002NNL1000RAA Power HAIMER Mill Uni Z2 Ball Nose — V1002NNL;with Safe-Lock Shank, Cutting D1 = 10,00 |
| V1002NNL1200RAA Power HAIMER Mill Uni Z2 Ball Nose — V1002NNL;with Safe-Lock Shank, Cutting D1 = 12,00 |
| V1002NNL1600RAA Power HAIMER Mill Uni Z2 Ball Nose — V1002NNL;with Safe-Lock Shank, Cutting D1 = 16,00 |
| V1002NNL2000RAA Power HAIMER Mill Uni Z2 Ball Nose — V1002NNL;with Safe-Lock Shank, Cutting D1 = 20,00 |
| V1002NNH0200RAA Power HAIMER Mill Uni Z2 Ball Nose — V1002NNH;with Straight Shank, Cutting D1 = 2,00 |
| V1002NNH0300RAA Power HAIMER Mill Uni Z2 Ball Nose — V1002NNH;with Straight Shank, Cutting D1 = 3,00 |
| V1002NNH0400RAA Power HAIMER Mill Uni Z2 Ball Nose — V1002NNH;with Straight Shank, Cutting D1 = 4,00 |
| V1002NNH0500RAA Power HAIMER Mill Uni Z2 Ball Nose — V1002NNH;with Straight Shank, Cutting D1 = 5,00 |
| V1002NNH0600RAA Power HAIMER Mill Uni Z2 Ball Nose — V1002NNH;with Straight Shank, Cutting D1 = 6,00 |
| V1002NNH0800RAA Power HAIMER Mill Uni Z2 Ball Nose — V1002NNH;with Straight Shank, Cutting D1 = 8,00 |
| V1002NNH1000RAA Power HAIMER Mill Uni Z2 Ball Nose — V1002NNH;with Straight Shank, Cutting D1 = 10,00 |
| V1002NNH1200RAA Power HAIMER Mill Uni Z2 Ball Nose — V1002NNH;with Straight Shank, Cutting D1 = 12,00 |
| V1002NNH1400RAA Power HAIMER Mill Uni Z2 Ball Nose — V1002NNH;with Straight Shank, Cutting D1 = 14,00 |
| V1002NNH1600RAA Power HAIMER Mill Uni Z2 Ball Nose — V1002NNH;with Straight Shank, Cutting D1 = 16,00 |
| V1002NNH1800RAA Power HAIMER Mill Uni Z2 Ball Nose — V1002NNH;with Straight Shank, Cutting D1 = 18,00 |
| V1002NNH2000RAA Power HAIMER Mill Uni Z2 Ball Nose — V1002NNH;with Straight Shank, Cutting D1 = 20,00 |
| V1002NNB0200RAA Power HAIMER Mill Uni Z2 Ball Nose — V1002NNB;with Weldon Shank, Cutting D1 = 2,00 |
| V1002NNB0300RAA Power HAIMER Mill Uni Z2 Ball Nose — V1002NNB;with Weldon Shank, Cutting D1 = 3,00 |
| V1002NNB0400RAA Power HAIMER Mill Uni Z2 Ball Nose — V1002NNB;with Weldon Shank, Cutting D1 = 4,00 |
| V1002NNB0500RAA Power HAIMER Mill Uni Z2 Ball Nose — V1002NNB;with Weldon Shank, Cutting D1 = 5,00 |
| V1002NNB0600RAA Power HAIMER Mill Uni Z2 Ball Nose — V1002NNB;with Weldon Shank, Cutting D1 = 6,00 |
| V1002NNB0800RAA Power HAIMER Mill Uni Z2 Ball Nose — V1002NNB;with Weldon Shank, Cutting D1 = 8,00 |
| V1002NNB1000RAA Power HAIMER Mill Uni Z2 Ball Nose — V1002NNB;with Weldon Shank, Cutting D1 = 10,00 |
| V1002NNB1200RAA Power HAIMER Mill Uni Z2 Ball Nose — V1002NNB;with Weldon Shank, Cutting D1 = 12,00 |
| V1002NNB1400RAA Power HAIMER Mill Uni Z2 Ball Nose — V1002NNB;with Weldon Shank, Cutting D1 = 14,00 |
| V1002NNB1600RAA Power HAIMER Mill Uni Z2 Ball Nose — V1002NNB;with Weldon Shank, Cutting D1 = 16,00 |
| V1002NNB1800RAA Power HAIMER Mill Uni Z2 Ball Nose — V1002NNB;with Weldon Shank, Cutting D1 = 18,00 |
| V1002NNB2000RAA Power HAIMER Mill Uni Z2 Ball Nose — V1002NNB;with Weldon Shank, Cutting D1 = 20,00 |
| F1003NNL0200SAA Power HAIMER Mill Uni Z3 — F1003NNL;with Safe-Lock Shank, Cutting D1 = 2,00 |
| F1003NNL0300SAA Power HAIMER Mill Uni Z3 — F1003NNL;with Safe-Lock Shank, Cutting D1 = 3,00 |
| F1003NNL0400SAA Power HAIMER Mill Uni Z3 — F1003NNL;with Safe-Lock Shank, Cutting D1 = 4,00 |
| F1003NNL0600SAA Power HAIMER Mill Uni Z3 — F1003NNL;with Safe-Lock Shank, Cutting D1 = 6,00 |
| F1003NNL0800SAA Power HAIMER Mill Uni Z3 — F1003NNL;with Safe-Lock Shank, Cutting D1 = 8,00 |
| F1003NNL1400SAA Power HAIMER Mill Uni Z3 — F1003NNL;with Safe-Lock Shank, Cutting D1 = 14,00 |
| F1003NNL1600SAA Power HAIMER Mill Uni Z3 — F1003NNL;with Safe-Lock Shank, Cutting D1 = 16,00 |
| F1003NNL1800SAA Power HAIMER Mill Uni Z3 — F1003NNL;with Safe-Lock Shank, Cutting D1 = 18,00 |
| F1003NNL2000SAA Power HAIMER Mill Uni Z3 — F1003NNL;with Safe-Lock Shank, Cutting D1 = 20,00 |
| F1003NNH0200SAA Power HAIMER Mill Uni Z3 — F1003NNH;with Straight Shank, Cutting D1 = 2,00 |
| F1003NNH0300SAA Power HAIMER Mill Uni Z3 — F1003NNH;with Straight Shank, Cutting D1 = 3,00 |
| F1003NNH0400SAA Power HAIMER Mill Uni Z3 — F1003NNH;with Straight Shank, Cutting D1 = 4,00 |
| F1003NNH0500SAA Power HAIMER Mill Uni Z3 — F1003NNH;with Straight Shank, Cutting D1 = 5,00 |
| F1003NNH0600SAA Power HAIMER Mill Uni Z3 — F1003NNH;with Straight Shank, Cutting D1 = 6,00 |
| F1003NNH0800SAA Power HAIMER Mill Uni Z3 — F1003NNH;with Straight Shank, Cutting D1 = 8,00 |
| F1003NNH1000SAA Power HAIMER Mill Uni Z3 — F1003NNH;with Straight Shank, Cutting D1 = 10,00 |
| F1003NNH1200SAA Power HAIMER Mill Uni Z3 — F1003NNH;with Straight Shank, Cutting D1 = 12,00 |
| F1003NNH1400SAA Power HAIMER Mill Uni Z3 — F1003NNH;with Straight Shank, Cutting D1 = 14,00 |
| F1003NNH1600SAA Power HAIMER Mill Uni Z3 — F1003NNH;with Straight Shank, Cutting D1 = 16,00 |
| F1003NNH1800SAA Power HAIMER Mill Uni Z3 — F1003NNH;with Straight Shank, Cutting D1 = 18,00 |
| F1003NNH2000SAA Power HAIMER Mill Uni Z3 — F1003NNH;with Straight Shank, Cutting D1 = 20,00 |
| F1003NNB0200SAA Power HAIMER Mill Uni Z3 — F1003NNB;with Weldon Shank, Cutting D1 = 2,00 |
| F1003NNB0300SAA Power HAIMER Mill Uni Z3 — F1003NNB;with Weldon Shank, Cutting D1 = 3,00 |
| F1003NNB0400SAA Power HAIMER Mill Uni Z3 — F1003NNB;with Weldon Shank, Cutting D1 = 4,00 |
| F1003NNB0500SAA Power HAIMER Mill Uni Z3 — F1003NNB;with Weldon Shank, Cutting D1 = 5,00 |
| F1003NNB0600SAA Power HAIMER Mill Uni Z3 — F1003NNB;with Weldon Shank, Cutting D1 = 6,00 |
| F1003NNB0800SAA Power HAIMER Mill Uni Z3 — F1003NNB;with Weldon Shank, Cutting D1 = 8,00 |
| F1003NNB1000SAA Power HAIMER Mill Uni Z3 — F1003NNB;with Weldon Shank, Cutting D1 = 10,00 |
| F1003NNB1200SAA Power HAIMER Mill Uni Z3 — F1003NNB;with Weldon Shank, Cutting D1 = 12,00 |
| F1003NNB1400SAA Power HAIMER Mill Uni Z3 — F1003NNB;with Weldon Shank, Cutting D1 = 14,00 |
| F1003NNB1600SAA Power HAIMER Mill Uni Z3 — F1003NNB;with Weldon Shank, Cutting D1 = 16,00 |
| F1003NNB1800SAA Power HAIMER Mill Uni Z3 — F1003NNB;with Weldon Shank, Cutting D1 = 18,00 |
| F1003NNB2000SAA Power HAIMER Mill Uni Z3 — F1003NNB;with Weldon Shank, Cutting D1 = 20,00 |
| F1004NNL0200CAA Power HAIMER Mill Uni Z4 — F1004NNL Chamfer;with Safe-Lock Shank, Cutting D1 = 2,00 |
| F1004NNL0300CAA Power HAIMER Mill Uni Z4 — F1004NNL Chamfer;with Safe-Lock Shank, Cutting D1 = 3,00 |
| F1004NNL0400CAA Power HAIMER Mill Uni Z4 — F1004NNL Chamfer;with Safe-Lock Shank, Cutting D1 = 4,00 |
| F1004NNL0500CAA Power HAIMER Mill Uni Z4 — F1004NNL Chamfer;with Safe-Lock Shank, Cutting D1 = 5,00 |
| F1004NNL0600CAA Power HAIMER Mill Uni Z4 — F1004NNL Chamfer;with Safe-Lock Shank, Cutting D1 = 6,00 |
| F1004NNL0800CAA Power HAIMER Mill Uni Z4 — F1004NNL Chamfer;with Safe-Lock Shank, Cutting D1 = 8,00 |
| F1004NNL1000CAA Power HAIMER Mill Uni Z4 — F1004NNL Chamfer;with Safe-Lock Shank, Cutting D1 = 10,00 |
| F1004NNL1200CAA Power HAIMER Mill Uni Z4 — F1004NNL Chamfer;with Safe-Lock Shank, Cutting D1 = 12,00 |
| F1004NNL1400CAA Power HAIMER Mill Uni Z4 — F1004NNL Chamfer;with Safe-Lock Shank, Cutting D1 = 14,00 |
| F1004NNL1600CAA Power HAIMER Mill Uni Z4 — F1004NNL Chamfer;with Safe-Lock Shank, Cutting D1 = 16,00 |
| F1004NNL1800CAA Power HAIMER Mill Uni Z4 — F1004NNL Chamfer;with Safe-Lock Shank, Cutting D1 = 18,00 |
| F1004NNL2000CAA Power HAIMER Mill Uni Z4 — F1004NNL Chamfer;with Safe-Lock Shank, Cutting D1 = 20,00 |
| F1004NNH0200CAA Power HAIMER Mill Uni Z4 — F1004NNH Chamfer;with Straight Shank, Cutting D1 = 2,00 |
| F1004NNH0300CAA Power HAIMER Mill Uni Z4 — F1004NNH Chamfer;with Straight Shank, Cutting D1 = 3,00 |
| F1004NNH0400CAA Power HAIMER Mill Uni Z4 — F1004NNH Chamfer;with Straight Shank, Cutting D1 = 4,00 |
| F1004NNH0500CAA Power HAIMER Mill Uni Z4 — F1004NNH Chamfer;with Straight Shank, Cutting D1 = 5,00 |
| F1004NNH0600CAA Power HAIMER Mill Uni Z4 — F1004NNH Chamfer;with Straight Shank, Cutting D1 = 6,00 |
| F1004NNH0800CAA Power HAIMER Mill Uni Z4 — F1004NNH Chamfer;with Straight Shank, Cutting D1 = 8,00 |
| F1004NNH1000CAA Power HAIMER Mill Uni Z4 — F1004NNH Chamfer;with Straight Shank, Cutting D1 = 10,00 |
| F1004NNH1200CAA Power HAIMER Mill Uni Z4 — F1004NNH Chamfer;with Straight Shank, Cutting D1 = 12,00 |
| F1004NNH1400CAA Power HAIMER Mill Uni Z4 — F1004NNH Chamfer;with Straight Shank, Cutting D1 = 14,00 |
| F1004NNH1600CAA Power HAIMER Mill Uni Z4 — F1004NNH Chamfer;with Straight Shank, Cutting D1 = 16,00 |
| F1004NNH1800CAA Power HAIMER Mill Uni Z4 — F1004NNH Chamfer;with Straight Shank, Cutting D1 = 18,00 |
| F1004NNH2000CAA Power HAIMER Mill Uni Z4 — F1004NNH Chamfer;with Straight Shank, Cutting D1 = 20,00 |
| F1004NNB0200CAA Power HAIMER Mill Uni Z4 — F1004NNB Chamfer;with Weldon Shank, Cutting D1 = 2,00 |
| F1004NNB0300CAA Power HAIMER Mill Uni Z4 — F1004NNB Chamfer;with Weldon Shank, Cutting D1 = 3,00 |
| F1004NNB0400CAA Power HAIMER Mill Uni Z4 — F1004NNB Chamfer;with Weldon Shank, Cutting D1 = 4,00 |
| F1004NNB0500CAA Power HAIMER Mill Uni Z4 — F1004NNB Chamfer;with Weldon Shank, Cutting D1 = 5,00 |
| F1004NNB0600CAA Power HAIMER Mill Uni Z4 — F1004NNB Chamfer;with Weldon Shank, Cutting D1 = 6,00 |
| F1004NNB0800CAA Power HAIMER Mill Uni Z4 — F1004NNB Chamfer;with Weldon Shank, Cutting D1 = 8,00 |
| F1004NNB1000CAA Power HAIMER Mill Uni Z4 — F1004NNB Chamfer;with Weldon Shank, Cutting D1 = 10,00 |
| F1004NNB1200CAA Power HAIMER Mill Uni Z4 — F1004NNB Chamfer;with Weldon Shank, Cutting D1 = 12,00 |
| F1004NNB1400CAA Power HAIMER Mill Uni Z4 — F1004NNB Chamfer;with Weldon Shank, Cutting D1 = 14,00 |
| F1004NNB1600CAA Power HAIMER Mill Uni Z4 — F1004NNB Chamfer;with Weldon Shank, Cutting D1 = 16,00 |
| F1004NNB1800CAA Power HAIMER Mill Uni Z4 — F1004NNB Chamfer;with Weldon Shank, Cutting D1 = 18,00 |
| F1004NNB2000CAA Power HAIMER Mill Uni Z4 — F1004NNB Chamfer;with Weldon Shank, Cutting D1 = 20,00 |
| F1104NNL0600CAA Power HAIMER Mill Uni Z4 — F1104NNL Chamfer;with Safe-Lock Shank, with Chip Breaker Cutting D1 = 6,00 |
| F1104NNL0800CAA Power HAIMER Mill Uni Z4 — F1104NNL Chamfer;with Safe-Lock Shank, with Chip Breaker Cutting D1 = 8,00 |
| F1104NNL1000CAA Power HAIMER Mill Uni Z4 — F1104NNL Chamfer;with Safe-Lock Shank, with Chip Breaker Cutting D1 = 10,00 |
| F1104NNL1200CAA Power HAIMER Mill Uni Z4 — F1104NNL Chamfer;with Safe-Lock Shank, with Chip Breaker Cutting D1 = 12,00 |
| F1104NNL1400CAA Power HAIMER Mill Uni Z4 — F1104NNL Chamfer;with Safe-Lock Shank, with Chip Breaker Cutting D1 = 14,00 |
| F1104NNL1600CAA Power HAIMER Mill Uni Z4 — F1104NNL Chamfer;with Safe-Lock Shank, with Chip Breaker Cutting D1 = 16,00 |
| F1104NNL1800CAA Power HAIMER Mill Uni Z4 — F1104NNL Chamfer;with Safe-Lock Shank, with Chip Breaker Cutting D1 = 18,00 |
| F1104NNL2000CAA Power HAIMER Mill Uni Z4 — F1104NNL Chamfer;with Safe-Lock Shank, with Chip Breaker Cutting D1 = 20,00 |
| F1104NNH0600CAA Power HAIMER Mill Uni Z4 — F1104NNH Chamfer;with Straight Shank, with Chip Breaker, Cutting D1 = 6,00 |
| F1104NNH0800CAA Power HAIMER Mill Uni Z4 — F1104NNH Chamfer;with Straight Shank, with Chip Breaker, Cutting D1 = 8,00 |
| F1104NNH1000CAA Power HAIMER Mill Uni Z4 — F1104NNH Chamfer;with Straight Shank, with Chip Breaker, Cutting D1 = 10,00 |
| F1104NNH1200CAA Power HAIMER Mill Uni Z4 — F1104NNH Chamfer;with Straight Shank, with Chip Breaker, Cutting D1 = 12,00 |
| F1104NNH1400CAA Power HAIMER Mill Uni Z4 — F1104NNH Chamfer;with Straight Shank, with Chip Breaker, Cutting D1 = 14,00 |
| F1104NNH1600CAA Power HAIMER Mill Uni Z4 — F1104NNH Chamfer;with Straight Shank, with Chip Breaker, Cutting D1 = 16,00 |
| F1104NNH1800CAA Power HAIMER Mill Uni Z4 — F1104NNH Chamfer;with Straight Shank, with Chip Breaker, Cutting D1 = 18,00 |
| F1104NNH2000CAA Power HAIMER Mill Uni Z4 — F1104NNH Chamfer;with Straight Shank, with Chip Breaker, Cutting D1 = 20,00 |
| F1104NNB0600CAA Power HAIMER Mill Uni Z4 — F1104NNB Chamfer;with Weldon Shank, with Chip Breaker, Cutting D1 = 6,00 |
| F1104NNB0800CAA Power HAIMER Mill Uni Z4 — F1104NNB Chamfer;with Weldon Shank, with Chip Breaker, Cutting D1 = 8,00 |
| F1104NNB1000CAA Power HAIMER Mill Uni Z4 — F1104NNB Chamfer;with Weldon Shank, with Chip Breaker, Cutting D1 = 10,00 |
| F1104NNB1200CAA Power HAIMER Mill Uni Z4 — F1104NNB Chamfer;with Weldon Shank, with Chip Breaker, Cutting D1 = 12,00 |
| F1104NNB1400CAA Power HAIMER Mill Uni Z4 — F1104NNB Chamfer;with Weldon Shank, with Chip Breaker, Cutting D1 = 14,00 |
| F1104NNB1600CAA Power HAIMER Mill Uni Z4 — F1104NNB Chamfer;with Weldon Shank, with Chip Breaker, Cutting D1 = 16,00 |
| F1104NNB1800CAA Power HAIMER Mill Uni Z4 — F1104NNB Chamfer;with Weldon Shank, with Chip Breaker, Cutting D1 = 18,00 |
| F1104NNB2000CAA Power HAIMER Mill Uni Z4 — F1104NNB Chamfer;with Weldon Shank, with Chip Breaker, Cutting D1 = 20,00 |
| F1004NNL0200R0.20AA Power HAIMER Mill Uni Z4 — F1004NNL Corner Radius;with Safe-Lock Shank, Radius = 0,20 mm, Cutting D1 = 2,00 |
| F1004NNL0300R0.30AA Power HAIMER Mill Uni Z4 — F1004NNL Corner Radius;with Safe-Lock Shank, Radius = 0,30 mm, Cutting D1 = 3,00 |
| F1004NNL0400R0.30AA Power HAIMER Mill Uni Z4 — F1004NNL Corner Radius;with Safe-Lock Shank, Radius = 0,30 mm, Cutting D1 = 4,00 |
| F1004NNL0400R0.40AA Power HAIMER Mill Uni Z4 — F1004NNL Corner Radius;with Safe-Lock Shank, Radius = 0,40 mm, Cutting D1 = 4,00 |
| F1004NNL0400R0.50AA Power HAIMER Mill Uni Z4 — F1004NNL Corner Radius;with Safe-Lock Shank, Radius = 0,50 mm, Cutting D1 = 4,00 |
| F1004NNL0500R0.30AA Power HAIMER Mill Uni Z4 — F1004NNL Corner Radius;with Safe-Lock Shank, Radius = 0,30 mm, Cutting D1 = 5,00 |
| F1004NNL0500R0.50AA Power HAIMER Mill Uni Z4 — F1004NNL Corner Radius;with Safe-Lock Shank, Radius = 0,50 mm, Cutting D1 = 5,00 |
| F1004NNL0500R1.00AA Power HAIMER Mill Uni Z4 — F1004NNL Corner Radius;with Safe-Lock Shank, Radius = 1,00 mm, Cutting D1 = 5,00 |
| F1004NNL0600R0.30AA Power HAIMER Mill Uni Z4 — F1004NNL Corner Radius;with Safe-Lock Shank, Radius = 0,30 mm, Cutting D1 = 6,00 |
| F1004NNL0600R0.50AA Power HAIMER Mill Uni Z4 — F1004NNL Corner Radius;with Safe-Lock Shank, Radius = 0,50 mm, Cutting D1 = 6,00 |
| F1004NNL0600R1.00AA Power HAIMER Mill Uni Z4 — F1004NNL Corner Radius;with Safe-Lock Shank, Radius = 1,00 mm, Cutting D1 = 6,00 |
| F1004NNL0600R1.50AA Power HAIMER Mill Uni Z4 — F1004NNL Corner Radius;with Safe-Lock Shank, Radius = 1,50 mm, Cutting D1 = 6,00 |
| F1004NNL0800R0.30AA Power HAIMER Mill Uni Z4 — F1004NNL Corner Radius;with Safe-Lock Shank, Radius = 0,30 mm, Cutting D1 = 8,00 |
| F1004NNL0800R0.50AA Power HAIMER Mill Uni Z4 — F1004NNL Corner Radius;with Safe-Lock Shank, Radius = 0,50 mm, Cutting D1 = 8,00 |
| F1004NNL0800R1.00AA Power HAIMER Mill Uni Z4 — F1004NNL Corner Radius;with Safe-Lock Shank, Radius = 1,00 mm, Cutting D1 = 8,00 |
| F1004NNL0800R1.50AA Power HAIMER Mill Uni Z4 — F1004NNL Corner Radius;with Safe-Lock Shank, Radius = 1,50 mm, Cutting D1 = 8,00 |
| F1004NNL0800R2.00AA Power HAIMER Mill Uni Z4 — F1004NNL Corner Radius;with Safe-Lock Shank, Radius = 2,00 mm, Cutting D1 = 8,00 |
| F1004NNL1000R0.30AA Power HAIMER Mill Uni Z4 — F1004NNL Corner Radius;with Safe-Lock Shank, Radius = 0,30 mm, Cutting D1 = 10,00 |
| F1004NNL1000R0.50AA Power HAIMER Mill Uni Z4 — F1004NNL Corner Radius;with Safe-Lock Shank, Radius = 0,50 mm, Cutting D1 = 10,00 |
| F1004NNL1000R1.00AA Power HAIMER Mill Uni Z4 — F1004NNL Corner Radius;with Safe-Lock Shank, Radius = 1,00 mm, Cutting D1 = 10,00 |
| F1004NNL1000R1.50AA Power HAIMER Mill Uni Z4 — F1004NNL Corner Radius;with Safe-Lock Shank, Radius = 1,50 mm, Cutting D1 = 10,00 |
| F1004NNL1000R2.00AA Power HAIMER Mill Uni Z4 — F1004NNL Corner Radius;with Safe-Lock Shank, Radius = 2,00 mm, Cutting D1 = 10,00 |
| F1004NNL1200R0.30AA Power HAIMER Mill Uni Z4 — F1004NNL Corner Radius;with Safe-Lock Shank, Radius = 0,30 mm, Cutting D1 = 12,00 |
| F1004NNL1200R0.50AA Power HAIMER Mill Uni Z4 — F1004NNL Corner Radius;with Safe-Lock Shank, Radius = 0,50 mm, Cutting D1 = 12,00 |
| F1004NNL1200R1.00AA Power HAIMER Mill Uni Z4 — F1004NNL Corner Radius;with Safe-Lock Shank, Radius = 1,00 mm, Cutting D1 = 12,00 |
| F1004NNL1200R1.50AA Power HAIMER Mill Uni Z4 — F1004NNL Corner Radius;with Safe-Lock Shank, Radius = 1,50 mm, Cutting D1 = 12,00 |
| F1004NNL1200R2.00AA Power HAIMER Mill Uni Z4 — F1004NNL Corner Radius;with Safe-Lock Shank, Radius = 2,00 mm, Cutting D1 = 12,00 |
| F1004NNL1200R3.00AA Power HAIMER Mill Uni Z4 — F1004NNL Corner Radius;with Safe-Lock Shank, Radius = 3,00 mm, Cutting D1 = 12,00 |
| F1004NNL1200R4.00AA Power HAIMER Mill Uni Z4 — F1004NNL Corner Radius;with Safe-Lock Shank, Radius = 4,00 mm, Cutting D1 = 12,00 |
| F1004NNL1400R0.50AA Power HAIMER Mill Uni Z4 — F1004NNL Corner Radius;with Safe-Lock Shank, Radius = 0,50 mm, Cutting D1 = 14,00 |
| F1004NNL1400R1.00AA Power HAIMER Mill Uni Z4 — F1004NNL Corner Radius;with Safe-Lock Shank, Radius = 1,00 mm, Cutting D1 = 14,00 |
| F1004NNL1400R2.00AA Power HAIMER Mill Uni Z4 — F1004NNL Corner Radius;with Safe-Lock Shank, Radius = 2,00 mm, Cutting D1 = 14,00 |
| F1004NNL1600R0.30AA Power HAIMER Mill Uni Z4 — F1004NNL Corner Radius;with Safe-Lock Shank, Radius = 0,30 mm, Cutting D1 = 16,00 |
| F1004NNL1600R0.50AA Power HAIMER Mill Uni Z4 — F1004NNL Corner Radius;with Safe-Lock Shank, Radius = 0,50 mm, Cutting D1 = 16,00 |
| F1004NNL1600R0.80AA Power HAIMER Mill Uni Z4 — F1004NNL Corner Radius;with Safe-Lock Shank, Radius = 0,80 mm, Cutting D1 = 16,00 |
| F1004NNL1600R1.00AA Power HAIMER Mill Uni Z4 — F1004NNL Corner Radius;with Safe-Lock Shank, Radius = 1,00 mm, Cutting D1 = 16,00 |
| F1004NNL1600R1.50AA Power HAIMER Mill Uni Z4 — F1004NNL Corner Radius;with Safe-Lock Shank, Radius = 1,50 mm, Cutting D1 = 16,00 |
| F1004NNL1600R2.00AA Power HAIMER Mill Uni Z4 — F1004NNL Corner Radius;with Safe-Lock Shank, Radius = 2,00 mm, Cutting D1 = 16,00 |
| F1004NNL1600R3.00AA Power HAIMER Mill Uni Z4 — F1004NNL Corner Radius;with Safe-Lock Shank, Radius = 3,00 mm, Cutting D1 = 16,00 |
| F1004NNL1600R4.00AA Power HAIMER Mill Uni Z4 — F1004NNL Corner Radius;with Safe-Lock Shank, Radius = 4,00 mm, Cutting D1 = 16,00 |
| F1004NNL1800R0.50AA Power HAIMER Mill Uni Z4 — F1004NNL Corner Radius;with Safe-Lock Shank, Radius = 0,50 mm, Cutting D1 = 18,00 |
| F1004NNL1800R1.00AA Power HAIMER Mill Uni Z4 — F1004NNL Corner Radius;with Safe-Lock Shank, Radius = 1,00 mm, Cutting D1 = 18,00 |
| F1004NNL1800R2.00AA Power HAIMER Mill Uni Z4 — F1004NNL Corner Radius;with Safe-Lock Shank, Radius = 2,00 mm, Cutting D1 = 18,00 |
| F1004NNL2000R0.30AA Power HAIMER Mill Uni Z4 — F1004NNL Corner Radius;with Safe-Lock Shank, Radius = 0,30 mm, Cutting D1 = 20,00 |
| F1004NNL2000R0.50AA Power HAIMER Mill Uni Z4 — F1004NNL Corner Radius;with Safe-Lock Shank, Radius = 0,50 mm, Cutting D1 = 20,00 |
| F1004NNL2000R0.80AA Power HAIMER Mill Uni Z4 — F1004NNL Corner Radius;with Safe-Lock Shank, Radius = 0,80 mm, Cutting D1 = 20,00 |
| F1004NNL2000R1.00AA Power HAIMER Mill Uni Z4 — F1004NNL Corner Radius;with Safe-Lock Shank, Radius = 1,00 mm, Cutting D1 = 20,00 |
| F1004NNL2000R1.50AA Power HAIMER Mill Uni Z4 — F1004NNL Corner Radius;with Safe-Lock Shank, Radius = 1,50 mm, Cutting D1 = 20,00 |
| F1004NNL2000R2.00AA Power HAIMER Mill Uni Z4 — F1004NNL Corner Radius;with Safe-Lock Shank, Radius = 2,00 mm, Cutting D1 = 20,00 |
| F1004NNL2000R3.00AA Power HAIMER Mill Uni Z4 — F1004NNL Corner Radius;with Safe-Lock Shank, Radius = 3,00 mm, Cutting D1 = 20,00 |
| F1004NNL2000R4.00AA Power HAIMER Mill Uni Z4 — F1004NNL Corner Radius;with Safe-Lock Shank, Radius = 4,00 mm, Cutting D1 = 20,00 |
| F1004NNH0200R0.20AA Power HAIMER Mill Uni Z4 — F1004NNH Corner Radius;with Straight Shank, Radius = 0,20 mm, Cutting D1 = 2,00 |
| F1004NNH0300R0.30AA Power HAIMER Mill Uni Z4 — F1004NNH Corner Radius;with Straight Shank, Radius = 0,30 mm, Cutting D1 = 3,00 |
| F1004NNH0400R0.30AA Power HAIMER Mill Uni Z4 — F1004NNH Corner Radius;with Straight Shank, Radius = 0,30 mm, Cutting D1 = 4,00 |
| F1004NNH0400R0.40AA Power HAIMER Mill Uni Z4 — F1004NNH Corner Radius;with Straight Shank, Radius = 0,40 mm, Cutting D1 = 4,00 |
| F1004NNH0400R0.50AA Power HAIMER Mill Uni Z4 — F1004NNH Corner Radius;with Straight Shank, Radius = 0,50 mm, Cutting D1 = 4,00 |
| F1004NNH0500R0.30AA Power HAIMER Mill Uni Z4 — F1004NNH Corner Radius;with Straight Shank, Radius = 0,30 mm, Cutting D1 = 5,00 |
| F1004NNH0500R0.50AA Power HAIMER Mill Uni Z4 — F1004NNH Corner Radius;with Straight Shank, Radius = 0,50 mm, Cutting D1 = 5,00 |
| F1004NNH0500R1.00AA Power HAIMER Mill Uni Z4 — F1004NNH Corner Radius;with Straight Shank, Radius = 1,00 mm, Cutting D1 = 5,00 |
| F1004NNH0600R0.30AA Power HAIMER Mill Uni Z4 — F1004NNH Corner Radius;with Straight Shank, Radius = 0,30 mm, Cutting D1 = 6,00 |
| F1004NNH0600R0.50AA Power HAIMER Mill Uni Z4 — F1004NNH Corner Radius;with Straight Shank, Radius = 0,50 mm, Cutting D1 = 6,00 |
| F1004NNH0600R1.00AA Power HAIMER Mill Uni Z4 — F1004NNH Corner Radius;with Straight Shank, Radius = 1,00 mm, Cutting D1 = 6,00 |
| F1004NNH0600R1.50AA Power HAIMER Mill Uni Z4 — F1004NNH Corner Radius;with Straight Shank, Radius = 1,50 mm, Cutting D1 = 6,00 |
| F1004NNH0800R0.30AA Power HAIMER Mill Uni Z4 — F1004NNH Corner Radius;with Straight Shank, Radius = 0,30 mm, Cutting D1 = 8,00 |
| F1004NNH0800R0.50AA Power HAIMER Mill Uni Z4 — F1004NNH Corner Radius;with Straight Shank, Radius = 0,50 mm, Cutting D1 = 8,00 |
| F1004NNH0800R1.00AA Power HAIMER Mill Uni Z4 — F1004NNH Corner Radius;with Straight Shank, Radius = 1,00 mm, Cutting D1 = 8,00 |
| F1004NNH0800R1.50AA Power HAIMER Mill Uni Z4 — F1004NNH Corner Radius;with Straight Shank, Radius = 1,50 mm, Cutting D1 = 8,00 |
| F1004NNH0800R2.00AA Power HAIMER Mill Uni Z4 — F1004NNH Corner Radius;with Straight Shank, Radius = 2,00 mm, Cutting D1 = 8,00 |
| F1004NNH1000R0.30AA Power HAIMER Mill Uni Z4 — F1004NNH Corner Radius;with Straight Shank, Radius = 0,30 mm, Cutting D1 = 10,00 |
| F1004NNH1000R0.50AA Power HAIMER Mill Uni Z4 — F1004NNH Corner Radius;with Straight Shank, Radius = 0,50 mm, Cutting D1 = 10,00 |
| F1004NNH1000R1.00AA Power HAIMER Mill Uni Z4 — F1004NNH Corner Radius;with Straight Shank, Radius = 1,00 mm, Cutting D1 = 10,00 |
| F1004NNH1000R1.50AA Power HAIMER Mill Uni Z4 — F1004NNH Corner Radius;with Straight Shank, Radius = 1,50 mm, Cutting D1 = 10,00 |
| F1004NNH1000R2.00AA Power HAIMER Mill Uni Z4 — F1004NNH Corner Radius;with Straight Shank, Radius = 2,00 mm, Cutting D1 = 10,00 |
| F1004NNH1200R0.30AA Power HAIMER Mill Uni Z4 — F1004NNH Corner Radius;with Straight Shank, Radius = 0,30 mm, Cutting D1 = 12,00 |
| F1004NNH1200R0.50AA Power HAIMER Mill Uni Z4 — F1004NNH Corner Radius;with Straight Shank, Radius = 0,50 mm, Cutting D1 = 12,00 |
| F1004NNH1200R1.00AA Power HAIMER Mill Uni Z4 — F1004NNH Corner Radius;with Straight Shank, Radius = 1,00 mm, Cutting D1 = 12,00 |
| F1004NNH1200R1.50AA Power HAIMER Mill Uni Z4 — F1004NNH Corner Radius;with Straight Shank, Radius = 1,50 mm, Cutting D1 = 12,00 |
| F1004NNH1200R2.00AA Power HAIMER Mill Uni Z4 — F1004NNH Corner Radius;with Straight Shank, Radius = 2,00 mm, Cutting D1 = 12,00 |
| F1004NNH1200R3.00AA Power HAIMER Mill Uni Z4 — F1004NNH Corner Radius;with Straight Shank, Radius = 3,00 mm, Cutting D1 = 12,00 |
| F1004NNH1200R4.00AA Power HAIMER Mill Uni Z4 — F1004NNH Corner Radius;with Straight Shank, Radius = 4,00 mm, Cutting D1 = 12,00 |
| F1004NNH1400R0.50AA Power HAIMER Mill Uni Z4 — F1004NNH Corner Radius;with Straight Shank, Radius = 0,50 mm, Cutting D1 = 14,00 |
| F1004NNH1400R1.00AA Power HAIMER Mill Uni Z4 — F1004NNH Corner Radius;with Straight Shank, Radius = 1,00 mm, Cutting D1 = 14,00 |
| F1004NNH1400R2.00AA Power HAIMER Mill Uni Z4 — F1004NNH Corner Radius;with Straight Shank, Radius = 2,00 mm, Cutting D1 = 14,00 |
| F1004NNH1600R0.30AA Power HAIMER Mill Uni Z4 — F1004NNH Corner Radius;with Straight Shank, Radius = 0,30 mm, Cutting D1 = 16,00 |
| F1004NNH1600R0.50AA Power HAIMER Mill Uni Z4 — F1004NNH Corner Radius;with Straight Shank, Radius = 0,50 mm, Cutting D1 = 16,00 |
| F1004NNH1600R0.80AA Power HAIMER Mill Uni Z4 — F1004NNH Corner Radius;with Straight Shank, Radius = 0,80 mm, Cutting D1 = 16,00 |
| F1004NNH1600R1.00AA Power HAIMER Mill Uni Z4 — F1004NNH Corner Radius;with Straight Shank, Radius = 1,00 mm, Cutting D1 = 16,00 |
| F1004NNH1600R1.50AA Power HAIMER Mill Uni Z4 — F1004NNH Corner Radius;with Straight Shank, Radius = 1,50 mm, Cutting D1 = 16,00 |
| F1004NNH1600R2.00AA Power HAIMER Mill Uni Z4 — F1004NNH Corner Radius;with Straight Shank, Radius = 2,00 mm, Cutting D1 = 16,00 |
| F1004NNH1600R3.00AA Power HAIMER Mill Uni Z4 — F1004NNH Corner Radius;with Straight Shank, Radius = 3,00 mm, Cutting D1 = 16,00 |
| F1004NNH1600R4.00AA Power HAIMER Mill Uni Z4 — F1004NNH Corner Radius;with Straight Shank, Radius = 4,00 mm, Cutting D1 = 16,00 |
| F1004NNH1800R0.50AA Power HAIMER Mill Uni Z4 — F1004NNH Corner Radius;with Straight Shank, Radius = 0,50 mm, Cutting D1 = 18,00 |
| F1004NNH1800R1.00AA Power HAIMER Mill Uni Z4 — F1004NNH Corner Radius;with Straight Shank, Radius = 1,00 mm, Cutting D1 = 18,00 |
| F1004NNH1800R2.00AA Power HAIMER Mill Uni Z4 — F1004NNH Corner Radius;with Straight Shank, Radius = 2,00 mm, Cutting D1 = 18,00 |
| F1004NNH2000R0.30AA Power HAIMER Mill Uni Z4 — F1004NNH Corner Radius;with Straight Shank, Radius = 0,30 mm, Cutting D1 = 20,00 |
| F1004NNH2000R0.50AA Power HAIMER Mill Uni Z4 — F1004NNH Corner Radius;with Straight Shank, Radius = 0,50 mm, Cutting D1 = 20,00 |
| F1004NNH2000R0.80AA Power HAIMER Mill Uni Z4 — F1004NNH Corner Radius;with Straight Shank, Radius = 0,80 mm, Cutting D1 = 20,00 |
| F1004NNH2000R1.00AA Power HAIMER Mill Uni Z4 — F1004NNH Corner Radius;with Straight Shank, Radius = 1,00 mm, Cutting D1 = 20,00 |
| F1004NNH2000R1.50AA Power HAIMER Mill Uni Z4 — F1004NNH Corner Radius;with Straight Shank, Radius = 1,50 mm, Cutting D1 = 20,00 |
| F1004NNH2000R2.00AA Power HAIMER Mill Uni Z4 — F1004NNH Corner Radius;with Straight Shank, Radius = 2,00 mm, Cutting D1 = 20,00 |
| F1004NNH2000R3.00AA Power HAIMER Mill Uni Z4 — F1004NNH Corner Radius;with Straight Shank, Radius = 3,00 mm, Cutting D1 = 20,00 |
| F1004NNH2000R4.00AA Power HAIMER Mill Uni Z4 — F1004NNH Corner Radius;with Straight Shank, Radius = 4,00 mm, Cutting D1 = 20,00 |
| F1004NNB0200R0.20AA Power HAIMER Mill Uni Z4 — F1004NNB Corner Radius;with Weldon Shank, Radius = 0,20 mm, Cutting D1 = 2,00 |
| F1004NNB0300R0.30AA Power HAIMER Mill Uni Z4 — F1004NNB Corner Radius;with Weldon Shank, Radius = 0,30 mm, Cutting D1 = 3,00 |
| F1004NNB0400R0.30AA Power HAIMER Mill Uni Z4 — F1004NNB Corner Radius;with Weldon Shank, Radius = 0,30 mm, Cutting D1 = 4,00 |
| F1004NNB0400R0.40AA Power HAIMER Mill Uni Z4 — F1004NNB Corner Radius;with Weldon Shank, Radius = 0,40 mm, Cutting D1 = 4,00 |
| F1004NNB0400R0.50AA Power HAIMER Mill Uni Z4 — F1004NNB Corner Radius;with Weldon Shank, Radius = 0,50 mm, Cutting D1 = 4,00 |
| F1004NNB0500R0.30AA Power HAIMER Mill Uni Z4 — F1004NNB Corner Radius;with Weldon Shank, Radius = 0,30 mm, Cutting D1 = 5,00 |
| F1004NNB0500R0.50AA Power HAIMER Mill Uni Z4 — F1004NNB Corner Radius;with Weldon Shank, Radius = 0,50 mm, Cutting D1 = 5,00 |
| F1004NNB0500R1.00AA Power HAIMER Mill Uni Z4 — F1004NNB Corner Radius;with Weldon Shank, Radius = 1,00 mm, Cutting D1 = 5,00 |
| F1004NNB0600R0.30AA Power HAIMER Mill Uni Z4 — F1004NNB Corner Radius;with Weldon Shank, Radius = 0,30 mm, Cutting D1 = 6,00 |
| F1004NNB0600R0.50AA Power HAIMER Mill Uni Z4 — F1004NNB Corner Radius;with Weldon Shank, Radius = 0,50 mm, Cutting D1 = 6,00 |
| F1004NNB0600R1.00AA Power HAIMER Mill Uni Z4 — F1004NNB Corner Radius;with Weldon Shank, Radius = 1,00 mm, Cutting D1 = 6,00 |
| F1004NNB0600R1.50AA Power HAIMER Mill Uni Z4 — F1004NNB Corner Radius;with Weldon Shank, Radius = 1,50 mm, Cutting D1 = 6,00 |
| F1004NNB0800R0.30AA Power HAIMER Mill Uni Z4 — F1004NNB Corner Radius;with Weldon Shank, Radius = 0,30 mm, Cutting D1 = 8,00 |
| F1004NNB0800R0.50AA Power HAIMER Mill Uni Z4 — F1004NNB Corner Radius;with Weldon Shank, Radius = 0,50 mm, Cutting D1 = 8,00 |
| F1004NNB0800R1.00AA Power HAIMER Mill Uni Z4 — F1004NNB Corner Radius;with Weldon Shank, Radius = 1,00 mm, Cutting D1 = 8,00 |
| F1004NNB0800R1.50AA Power HAIMER Mill Uni Z4 — F1004NNB Corner Radius;with Weldon Shank, Radius = 1,50 mm, Cutting D1 = 8,00 |
| F1004NNB0800R2.00AA Power HAIMER Mill Uni Z4 — F1004NNB Corner Radius;with Weldon Shank, Radius = 2,00 mm, Cutting D1 = 8,00 |
| F1004NNB1000R0.30AA Power HAIMER Mill Uni Z4 — F1004NNB Corner Radius;with Weldon Shank, Radius = 0,30 mm, Cutting D1 = 10,00 |
| F1004NNB1000R0.50AA Power HAIMER Mill Uni Z4 — F1004NNB Corner Radius;with Weldon Shank, Radius = 0,50 mm, Cutting D1 = 10,00 |
| F1004NNB1000R1.00AA Power HAIMER Mill Uni Z4 — F1004NNB Corner Radius;with Weldon Shank, Radius = 1,00 mm, Cutting D1 = 10,00 |
| F1004NNB1000R1.50AA Power HAIMER Mill Uni Z4 — F1004NNB Corner Radius;with Weldon Shank, Radius = 1,50 mm, Cutting D1 = 10,00 |
| F1004NNB1000R2.00AA Power HAIMER Mill Uni Z4 — F1004NNB Corner Radius;with Weldon Shank, Radius = 2,00 mm, Cutting D1 = 10,00 |
| F1004NNB1200R0.30AA Power HAIMER Mill Uni Z4 — F1004NNB Corner Radius;with Weldon Shank, Radius = 0,30 mm, Cutting D1 = 12,00 |
| F1004NNB1200R0.50AA Power HAIMER Mill Uni Z4 — F1004NNB Corner Radius;with Weldon Shank, Radius = 0,50 mm, Cutting D1 = 12,00 |
| F1004NNB1200R1.00AA Power HAIMER Mill Uni Z4 — F1004NNB Corner Radius;with Weldon Shank, Radius = 1,00 mm, Cutting D1 = 12,00 |
| F1004NNB1200R1.50AA Power HAIMER Mill Uni Z4 — F1004NNB Corner Radius;with Weldon Shank, Radius = 1,50 mm, Cutting D1 = 12,00 |
| F1004NNB1200R2.00AA Power HAIMER Mill Uni Z4 — F1004NNB Corner Radius;with Weldon Shank, Radius = 2,00 mm, Cutting D1 = 12,00 |
| F1004NNB1200R3.00AA Power HAIMER Mill Uni Z4 — F1004NNB Corner Radius;with Weldon Shank, Radius = 3,00 mm, Cutting D1 = 12,00 |
| F1004NNB1200R4.00AA Power HAIMER Mill Uni Z4 — F1004NNB Corner Radius;with Weldon Shank, Radius = 4,00 mm, Cutting D1 = 12,00 |
| F1004NNB1400R0.50AA Power HAIMER Mill Uni Z4 — F1004NNB Corner Radius;with Weldon Shank, Radius = 0,50 mm, Cutting D1 = 14,00 |
| F1004NNB1400R1.00AA Power HAIMER Mill Uni Z4 — F1004NNB Corner Radius;with Weldon Shank, Radius = 1,00 mm, Cutting D1 = 14,00 |
| F1004NNB1400R2.00AA Power HAIMER Mill Uni Z4 — F1004NNB Corner Radius;with Weldon Shank, Radius = 2,00 mm, Cutting D1 = 14,00 |
| F1004NNB1600R0.30AA Power HAIMER Mill Uni Z4 — F1004NNB Corner Radius;with Weldon Shank, Radius = 0,30 mm, Cutting D1 = 16,00 |
| F1004NNB1600R0.50AA Power HAIMER Mill Uni Z4 — F1004NNB Corner Radius;with Weldon Shank, Radius = 0,50 mm, Cutting D1 = 16,00 |
| F1004NNB1600R0.80AA Power HAIMER Mill Uni Z4 — F1004NNB Corner Radius;with Weldon Shank, Radius = 0,80 mm, Cutting D1 = 16,00 |
| F1004NNB1600R1.00AA Power HAIMER Mill Uni Z4 — F1004NNB Corner Radius;with Weldon Shank, Radius = 1,00 mm, Cutting D1 = 16,00 |
| F1004NNB1600R1.50AA Power HAIMER Mill Uni Z4 — F1004NNB Corner Radius;with Weldon Shank, Radius = 1,50 mm, Cutting D1 = 16,00 |
| F1004NNB1600R2.00AA Power HAIMER Mill Uni Z4 — F1004NNB Corner Radius;with Weldon Shank, Radius = 2,00 mm, Cutting D1 = 16,00 |
| F1004NNB1600R3.00AA Power HAIMER Mill Uni Z4 — F1004NNB Corner Radius;with Weldon Shank, Radius = 3,00 mm, Cutting D1 = 16,00 |
| F1004NNB1600R4.00AA Power HAIMER Mill Uni Z4 — F1004NNB Corner Radius;with Weldon Shank, Radius = 4,00 mm, Cutting D1 = 16,00 |
| F1004NNB1800R0.50AA Power HAIMER Mill Uni Z4 — F1004NNB Corner Radius;with Weldon Shank, Radius = 0,50 mm, Cutting D1 = 18,00 |
| F1004NNB1800R1.00AA Power HAIMER Mill Uni Z4 — F1004NNB Corner Radius;with Weldon Shank, Radius = 1,00 mm, Cutting D1 = 18,00 |
| F1004NNB1800R2.00AA Power HAIMER Mill Uni Z4 — F1004NNB Corner Radius;with Weldon Shank, Radius = 2,00 mm, Cutting D1 = 18,00 |
| F1004NNB2000R0.30AA Power HAIMER Mill Uni Z4 — F1004NNB Corner Radius;with Weldon Shank, Radius = 0,30 mm, Cutting D1 = 20,00 |
| F1004NNB2000R0.50AA Power HAIMER Mill Uni Z4 — F1004NNB Corner Radius;with Weldon Shank, Radius = 0,50 mm, Cutting D1 = 20,00 |
| F1004NNB2000R0.80AA Power HAIMER Mill Uni Z4 — F1004NNB Corner Radius;with Weldon Shank, Radius = 0,80 mm, Cutting D1 = 20,00 |
| F1004NNB2000R1.00AA Power HAIMER Mill Uni Z4 — F1004NNB Corner Radius;with Weldon Shank, Radius = 1,00 mm, Cutting D1 = 20,00 |
| F1004NNB2000R1.50AA Power HAIMER Mill Uni Z4 — F1004NNB Corner Radius;with Weldon Shank, Radius = 1,50 mm, Cutting D1 = 20,00 |
| F1004NNB2000R2.00AA Power HAIMER Mill Uni Z4 — F1004NNB Corner Radius;with Weldon Shank, Radius = 2,00 mm, Cutting D1 = 20,00 |
| F1004NNB2000R3.00AA Power HAIMER Mill Uni Z4 — F1004NNB Corner Radius;with Weldon Shank, Radius = 3,00 mm, Cutting D1 = 20,00 |
| F1004NNB2000R4.00AA Power HAIMER Mill Uni Z4 — F1004NNB Corner Radius;with Weldon Shank, Radius = 4,00 mm, Cutting D1 = 20,00 |
| F1304NNL0600CAA Power HAIMER Mill Uni Z4 — F1304NNL Cord Profile;with Safe-Lock Shank, Cutting D1 = 6,00 |
| F1304NNL0800CAA Power HAIMER Mill Uni Z4 — F1304NNL Cord Profile;with Safe-Lock Shank, Cutting D1 = 8,00 |
| F1304NNL1000CAA Power HAIMER Mill Uni Z4 — F1304NNL Cord Profile;with Safe-Lock Shank, Cutting D1 = 10,00 |
| F1304NNL1200CAA Power HAIMER Mill Uni Z4 — F1304NNL Cord Profile;with Safe-Lock Shank, Cutting D1 = 12,00 |
| F1304NNL1400CAA Power HAIMER Mill Uni Z4 — F1304NNL Cord Profile;with Safe-Lock Shank, Cutting D1 = 14,00 |
| F1304NNL1600CAA Power HAIMER Mill Uni Z4 — F1304NNL Cord Profile;with Safe-Lock Shank, Cutting D1 = 16,00 |
| F1304NNL1800CAA Power HAIMER Mill Uni Z4 — F1304NNL Cord Profile;with Safe-Lock Shank, Cutting D1 = 18,00 |
| F1304NNL2000CAA Power HAIMER Mill Uni Z4 — F1304NNL Cord Profile;with Safe-Lock Shank, Cutting D1 = 20,00 |
| F1304NNH0600CAA Power HAIMER Mill Uni Z4 — F1304NNH Cord Profile;with Straight Shank, Cutting D1 = 6,00 |
| F1304NNH0800CAA Power HAIMER Mill Uni Z4 — F1304NNH Cord Profile;with Straight Shank, Cutting D1 = 8,00 |
| F1304NNH1000CAA Power HAIMER Mill Uni Z4 — F1304NNH Cord Profile;with Straight Shank, Cutting D1 = 10,00 |
| F1304NNH1200CAA Power HAIMER Mill Uni Z4 — F1304NNH Cord Profile;with Straight Shank, Cutting D1 = 12,00 |
| F1304NNH1400CAA Power HAIMER Mill Uni Z4 — F1304NNH Cord Profile;with Straight Shank, Cutting D1 = 14,00 |
| F1304NNH1600CAA Power HAIMER Mill Uni Z4 — F1304NNH Cord Profile;with Straight Shank, Cutting D1 = 16,00 |
| F1304NNH1800CAA Power HAIMER Mill Uni Z4 — F1304NNH Cord Profile;with Straight Shank, Cutting D1 = 18,00 |
| F1304NNH2000CAA Power HAIMER Mill Uni Z4 — F1304NNH Cord Profile;with Straight Shank, Cutting D1 = 20,00 |
| F1304NNB0600CAA Power HAIMER Mill Uni Z4 — F1304NNB Cord Profile;with Weldon Shank, Cutting D1 = 6,00 |
| F1304NNB0800CAA Power HAIMER Mill Uni Z4 — F1304NNB Cord Profile;with Weldon Shank, Cutting D1 = 8,00 |
| F1304NNB1000CAA Power HAIMER Mill Uni Z4 — F1304NNB Cord Profile;with Weldon Shank, Cutting D1 = 10,00 |
| F1304NNB1200CAA Power HAIMER Mill Uni Z4 — F1304NNB Cord Profile;with Weldon Shank, Cutting D1 = 12,00 |
| F1304NNB1400CAA Power HAIMER Mill Uni Z4 — F1304NNB Cord Profile;with Weldon Shank, Cutting D1 = 14,00 |
| F1304NNB1600CAA Power HAIMER Mill Uni Z4 — F1304NNB Cord Profile;with Weldon Shank, Cutting D1 = 16,00 |
| F1304NNB1800CAA Power HAIMER Mill Uni Z4 — F1304NNB Cord Profile;with Weldon Shank, Cutting D1 = 18,00 |
| F1304NNB2000CAA Power HAIMER Mill Uni Z4 — F1304NNB Cord Profile;with Weldon Shank, Cutting D1 = 20,00 |
| F1005NNL1000CAA Power HAIMER Mill Uni Z5 — F1005NNL Chamfer;with Safe-Lock Shank, Cutting D1 = 10,0 |
| F1005NNL1200CAA Power HAIMER Mill Uni Z5 — F1005NNL Chamfer;with Safe-Lock Shank, Cutting D1 = 12,0 |
| F1005NNL1400CAA Power HAIMER Mill Uni Z5 — F1005NNL Chamfer;with Safe-Lock Shank, Cutting D1 = 14,0 |
| F1005NNL1600CAA Power HAIMER Mill Uni Z5 — F1005NNL Chamfer;with Safe-Lock Shank, Cutting D1 = 16,0 |
| F1005NNL1800CAA Power HAIMER Mill Uni Z5 — F1005NNL Chamfer;with Safe-Lock Shank, Cutting D1 = 18,0 |
| F1005NNL2000CAA Power HAIMER Mill Uni Z5 — F1005NNL Chamfer;with Safe-Lock Shank, Cutting D1 = 20,0 |
| F1005NNL2500CAA Power HAIMER Mill Uni Z5 — F1005NNL Chamfer;with Safe-Lock Shank, Cutting D1 = 25,0 |
| F1005NNL3200CAA Power HAIMER Mill Uni Z5 — F1005NNL Chamfer;with Safe-Lock Shank, Cutting D1 = 32,0 |
| F1005NNH1000CAA Power HAIMER Mill Uni Z5 — F1005NNH Chamfer;with Straight Shank, Cutting D1 = 10,0 |
| F1005NNH1200CAA Power HAIMER Mill Uni Z5 — F1005NNH Chamfer;with Straight Shank, Cutting D1 = 12,0 |
| F1005NNH1400CAA Power HAIMER Mill Uni Z5 — F1005NNH Chamfer;with Straight Shank, Cutting D1 = 14,0 |
| F1005NNH1600CAA Power HAIMER Mill Uni Z5 — F1005NNH Chamfer;with Straight Shank, Cutting D1 = 16,0 |
| F1005NNH1800CAA Power HAIMER Mill Uni Z5 — F1005NNH Chamfer;with Straight Shank, Cutting D1 = 18,0 |
| F1005NNH2000CAA Power HAIMER Mill Uni Z5 — F1005NNH Chamfer;with Straight Shank, Cutting D1 = 20,0 |
| F1005NNH2500CAA Power HAIMER Mill Uni Z5 — F1005NNH Chamfer;with Straight Shank, Cutting D1 = 25,0 |
| F1005NNH3200CAA Power HAIMER Mill Uni Z5 — F1005NNH Chamfer;with Straight Shank, Cutting D1 = 32,0 |
| F1005NNB1000CAA Power HAIMER Mill Uni Z5 — F1005NNB Chamfer;with Weldon Shank, Cutting D1 = 10,0 |
| F1005NNB1200CAA Power HAIMER Mill Uni Z5 — F1005NNB Chamfer;with Weldon Shank, Cutting D1 = 12,0 |
| F1005NNB1400CAA Power HAIMER Mill Uni Z5 — F1005NNB Chamfer;with Weldon Shank, Cutting D1 = 14,0 |
| F1005NNB1600CAA Power HAIMER Mill Uni Z5 — F1005NNB Chamfer;with Weldon Shank, Cutting D1 = 16,0 |
| F1005NNB1800CAA Power HAIMER Mill Uni Z5 — F1005NNB Chamfer;with Weldon Shank, Cutting D1 = 18,0 |
| F1005NNB2000CAA Power HAIMER Mill Uni Z5 — F1005NNB Chamfer;with Weldon Shank, Cutting D1 = 20,0 |
| F1005NNB2500CAA Power HAIMER Mill Uni Z5 — F1005NNB Chamfer;with Weldon Shank, Cutting D1 = 25,0 |
| F1005NNB3200CAA Power HAIMER Mill Uni Z5 — F1005NNB Chamfer;with Weldon Shank, Cutting D1 = 32,0 |
| F1005LLL0600CAA Power HAIMER Mill Uni Z5 — F1005LLL Chamfer;with Safe-Lock Shank, Cutting D1 = 6,0 |
| F1005LLL0800CAA Power HAIMER Mill Uni Z5 — F1005LLL Chamfer;with Safe-Lock Shank, Cutting D1 = 8,0 |
| F1005LLL1000CAA Power HAIMER Mill Uni Z5 — F1005LLL Chamfer;with Safe-Lock Shank, Cutting D1 = 10,0 |
| F1005LLL1200CAA Power HAIMER Mill Uni Z5 — F1005LLL Chamfer;with Safe-Lock Shank, Cutting D1 = 12,0 |
| F1005LLL1400CAA Power HAIMER Mill Uni Z5 — F1005LLL Chamfer;with Safe-Lock Shank, Cutting D1 = 14,0 |
| F1005LLL1600CAA Power HAIMER Mill Uni Z5 — F1005LLL Chamfer;with Safe-Lock Shank, Cutting D1 = 16,0 |
| F1005LLL1800CAA Power HAIMER Mill Uni Z5 — F1005LLL Chamfer;with Safe-Lock Shank, Cutting D1 = 18,0 |
| F1005LLL2000CAA Power HAIMER Mill Uni Z5 — F1005LLL Chamfer;with Safe-Lock Shank, Cutting D1 = 20,0 |
| F1005LLH0600CAA Power HAIMER Mill Uni Z5 — F1005LLH Chamfer;with Straight Shank, Cutting D1 = 6,0 |
| F1005LLH0800CAA Power HAIMER Mill Uni Z5 — F1005LLH Chamfer;with Straight Shank, Cutting D1 = 8,0 |
| F1005LLH1000CAA Power HAIMER Mill Uni Z5 — F1005LLH Chamfer;with Straight Shank, Cutting D1 = 10,0 |
| F1005LLH1200CAA Power HAIMER Mill Uni Z5 — F1005LLH Chamfer;with Straight Shank, Cutting D1 = 12,0 |
| F1005LLH1400CAA Power HAIMER Mill Uni Z5 — F1005LLH Chamfer;with Straight Shank, Cutting D1 = 14,0 |
| F1005LLH1600CAA Power HAIMER Mill Uni Z5 — F1005LLH Chamfer;with Straight Shank, Cutting D1 = 16,0 |
| F1005LLH1800CAA Power HAIMER Mill Uni Z5 — F1005LLH Chamfer;with Straight Shank, Cutting D1 = 18,0 |
| F1005LLH2000CAA Power HAIMER Mill Uni Z5 — F1005LLH Chamfer;with Straight Shank, Cutting D1 = 20,0 |
| F1005LLB0600CAA Power HAIMER Mill Uni Z5 — F1005LLB Chamfer;with Weldon Shank, Cutting D1 = 6,0 |
| F1005LLB0800CAA Power HAIMER Mill Uni Z5 — F1005LLB Chamfer;with Weldon Shank, Cutting D1 = 8,0 |
| F1005LLB1000CAA Power HAIMER Mill Uni Z5 — F1005LLB Chamfer;with Weldon Shank, Cutting D1 = 10,0 |
| F1005LLB1200CAA Power HAIMER Mill Uni Z5 — F1005LLB Chamfer;with Weldon Shank, Cutting D1 = 12,0 |
| F1005LLB1400CAA Power HAIMER Mill Uni Z5 — F1005LLB Chamfer;with Weldon Shank, Cutting D1 = 14,0 |
| F1005LLB1600CAA Power HAIMER Mill Uni Z5 — F1005LLB Chamfer;with Weldon Shank, Cutting D1 = 16,0 |
| F1005LLB1800CAA Power HAIMER Mill Uni Z5 — F1005LLB Chamfer;with Weldon Shank, Cutting D1 = 18,0 |
| F1005LLB2000CAA Power HAIMER Mill Uni Z5 — F1005LLB Chamfer;with Weldon Shank, Cutting D1 = 20,0 |
| F1105LLL0600CAA Power HAIMER Mill Uni Z5 — F1105LLL Chamfer;with Safe-Lock Shank, with Chip Breaker Cutting D1 = 6,0 |
| F1105LLL0800CAA Power HAIMER Mill Uni Z5 — F1105LLL Chamfer;with Safe-Lock Shank, with Chip Breaker Cutting D1 = 8,0 |
| F1105LLL1000CAA Power HAIMER Mill Uni Z5 — F1105LLL Chamfer;with Safe-Lock Shank, with Chip Breaker Cutting D1 = 10,0 |
| F1105LLL1200CAA Power HAIMER Mill Uni Z5 — F1105LLL Chamfer;with Safe-Lock Shank, with Chip Breaker Cutting D1 = 12,0 |
| F1105LLL1400CAA Power HAIMER Mill Uni Z5 — F1105LLL Chamfer;with Safe-Lock Shank, with Chip Breaker Cutting D1 = 14,0 |
| F1105LLL1600CAA Power HAIMER Mill Uni Z5 — F1105LLL Chamfer;with Safe-Lock Shank, with Chip Breaker Cutting D1 = 16,0 |
| F1105LLL1800CAA Power HAIMER Mill Uni Z5 — F1105LLL Chamfer;with Safe-Lock Shank, with Chip Breaker Cutting D1 = 18,0 |
| F1105LLL2000CAA Power HAIMER Mill Uni Z5 — F1105LLL Chamfer;with Safe-Lock Shank, with Chip Breaker Cutting D1 = 20,0 |
| F1105LLH0600CAA Power HAIMER Mill Uni Z5 — F1105LLH Chamfer;with Straight Shank, with Chip Breaker, Cutting D1 = 6,0 |
| F1105LLH0800CAA Power HAIMER Mill Uni Z5 — F1105LLH Chamfer;with Straight Shank, with Chip Breaker, Cutting D1 = 8,0 |
| F1105LLH1000CAA Power HAIMER Mill Uni Z5 — F1105LLH Chamfer;with Straight Shank, with Chip Breaker, Cutting D1 = 10,0 |
| F1105LLH1200CAA Power HAIMER Mill Uni Z5 — F1105LLH Chamfer;with Straight Shank, with Chip Breaker, Cutting D1 = 12,0 |
| F1105LLH1400CAA Power HAIMER Mill Uni Z5 — F1105LLH Chamfer;with Straight Shank, with Chip Breaker, Cutting D1 = 14,0 |
| F1105LLH1600CAA Power HAIMER Mill Uni Z5 — F1105LLH Chamfer;with Straight Shank, with Chip Breaker, Cutting D1 = 16,0 |
| F1105LLH1800CAA Power HAIMER Mill Uni Z5 — F1105LLH Chamfer;with Straight Shank, with Chip Breaker, Cutting D1 = 18,0 |
| F1105LLH2000CAA Power HAIMER Mill Uni Z5 — F1105LLH Chamfer;with Straight Shank, with Chip Breaker, Cutting D1 = 20,0 |
| F1105LLB0600CAA Power HAIMER Mill Uni Z5 — F1105LLB Chamfer;with Weldon Shank, with Chip Breaker, Cutting D1 = 6,0 |
| F1105LLB0800CAA Power HAIMER Mill Uni Z5 — F1105LLB Chamfer;with Weldon Shank, with Chip Breaker, Cutting D1 = 8,0 |
| F1105LLB1000CAA Power HAIMER Mill Uni Z5 — F1105LLB Chamfer;with Weldon Shank, with Chip Breaker, Cutting D1 = 10,0 |
| F1105LLB1200CAA Power HAIMER Mill Uni Z5 — F1105LLB Chamfer;with Weldon Shank, with Chip Breaker, Cutting D1 = 12,0 |
| F1105LLB1400CAA Power HAIMER Mill Uni Z5 — F1105LLB Chamfer;with Weldon Shank, with Chip Breaker, Cutting D1 = 14,0 |
| F1105LLB1600CAA Power HAIMER Mill Uni Z5 — F1105LLB Chamfer;with Weldon Shank, with Chip Breaker, Cutting D1 = 16,0 |
| F1105LLB1800CAA Power HAIMER Mill Uni Z5 — F1105LLB Chamfer;with Weldon Shank, with Chip Breaker, Cutting D1 = 18,0 |
| F1105LLB2000CAA Power HAIMER Mill Uni Z5 — F1105LLB Chamfer;with Weldon Shank, with Chip Breaker, Cutting D1 = 20,0 |
| 82.510.04 Collet for HG 01 4 mm |
| 82.510.04.5 Collet for HG 01 4,5 mm |
| 82.510.05 Collet for HG 01 5 mm |
| 82.510.05.5 Collet for HG 01 5,5 mm |
| 82.510.06 Collet for HG 01 6 mm |
| 82.510.06.3 Collet for HG 01 6,3 mm |
| 82.510.07 Collet for HG 01 7 mm |
| 82.510.08 Collet for HG 01 8 mm |
| 82.510.09 Collet for HG 01 9 mm |
| 82.520.10 Collet for HG 02 10 mm |
| 82.520.11 Collet for HG 02 11 mm |
| 82.520.12 Collet for HG 02 12 mm |
| 82.520.12.5 Collet for HG 02 12,5 mm |
| 82.520.14 Collet for HG 02 14 mm |
| 82.530.16 Collet for HG 03 16 mm |
| 82.530.18 Collet for HG 03 18 mm |
| 82.530.20 Collet for HG 03 20 mm |
| 82.560.01 HG-Tightening Bolt Pos. 1 |
| 82.560.02 HG-Tightening Bolt Pos. 2 |
| 82.560.03 HG-Tightening Bolt Pos. 3 |
| 82.560.04 HG-Tightening Bolt Pos. 4 |
| 82.560.05 HG-Tightening Bolt Pos. 5 |
| 82.560.06 HG-Tightening Bolt Pos. 6 |
| 82.560.07 HG-Tightening Bolt Pos. 7 |
| 82.560.08 HG-Tightening Bolt Pos. 8 |
| 82.560.09 HG-Tightening Bolt Pos. 9 |
| 82.560.10 HG-Tightening Bolt Pos. 10 |
| 82.560.12 HG-Tightening Bolt Pos. 12 |
| 82.560.14 HG-Tightening Bolt Pos. 14 |
| 82.560.15 HG-Tightening Bolt Pos. 15 |
| 82.560.17 HG-Tightening Bolt Pos. 17 |
| 82.560.18 HG-Tightening Bolt Pos. 18 |
| 82.560.20 HG-Tightening Bolt Pos. 20 |
| 82.610.02 Mini HG Extension size 2 10 cylindric |
| 82.611.01 Mini HG Extension size 1 slim 6 cylindric |
| 82.621.01 Mini HG Extension size 1 reinforced from 8 to 6 |
| 82.650.010 Mini HG Collet size 1 1 |
| 82.650.015 Mini HG Collet size 1 1,5 |
| 82.650.020 Mini HG Collet size 1 2 |
| 82.650.025 Mini HG Collet size 1 2,5 |
| 82.660.020 Mini HG Collet size 2 2 |
| 82.660.025 Mini HG Collet size 2 2,5 |
| 82.660.030 Mini HG Collet size 2 3 |
| 82.660.035 Mini HG Collet size 2 3,5 |
| 82.660.040 Mini HG Collet size 2 4 |
| 82.660.045 Mini HG Collet size 2 4,5 |
| 82.585.00 Lubricating paste for HG-Chuck |
| 82.570.00 Pull out hook for HG-Chuck |
| 82.590.01 Cone Cleaner for HG 01 |
| 82.590.02 Cone Cleaner for HG 02 |
| 82.590.03 Cone Cleaner for HG 03 |
| 82.578.00 Holding device for Mini-HG 6 8 10 |
| 82.575.00 Torque Wrench 6-50 Nm for HG-Chuck |
| 82.580.00 Hexagon key size 6 for Torque Wrench |
| 82.576.00 Torque Wrench for Mini HG-01 |
| 82.577.00 Torque Wrench for Mini HG-02 |
| 84.600.00.S Torque Wrench Torque Master without suitcase |
| 84.610.16 Insert for Torque Wrench Power Collet ER 16 |
| 84.610.25 Insert for Torque Wrench Power Collet ER 25 |
| 84.610.32 Insert for Torque Wrench Power Collet ER 32 |
| 84.620.00 Insert for Torque Wrench Blank |
| 84.620.16.1 Insert for Torque Wrench Standard ER 16 Mini |
| 84.620.11 Insert for Torque Wrench Standard ER 11 |
| 84.620.16 Insert for Torque Wrench Standard ER 16 |
| 84.620.20 Insert for Torque Wrench Standard ER 20 |
| 84.650.16 Wrench for Power Collet ER 16 |
| 84.650.25 Wrench for Power Collet ER 25 |
| 84.650.32 Wrench for Power Collet ER 32 |
| 84.650.16.1 Roller Bearing Wrench for High Precision Collet Chucks ER 16 |
| 84.650.25.1 Roller Bearing Wrench for High Precision Collet Chucks ER 25 |
| 84.650.32.1 Roller Bearing Wrench for High Precision Collet Chucks ER 32 |
| 83.912.11 Locknut for Collet Chuck ER 11 |
| 83.912.16 Locknut for Collet Chuck ER 16 |
| 83.912.16.HS Highspeed-Locknut HS / ER 16 |
| 83.912.20 Locknut for Collet Chuck ER 20 |
| 83.912.20.HS Highspeed-Locknut HS / ER 20 |
| 83.912.25 Locknut for Collet Chuck ER 25 |
| 83.912.25.HS Highspeed-Locknut HS / ER 25 |
| 83.912.32 Locknut for Collet Chuck ER 32 |
| 83.912.40 Locknut for Collet Chuck ER 40 |
| 83.912.40.HS Highspeed-Locknut HS / ER 40 |
| 83.914.16 Locknut Power Collet ER 16 |
| 83.914.25 Locknut Power Collet ER 25 |
| 83.914.32 Locknut Power Collet ER 32 |
| 83.914.16.1 Smooth Locknut for High Precision Collet ER 16 |
| 83.914.25.1 Smooth Locknut for High Precision Collet ER 25 |
| 83.914.32.1 Smooth Locknut for High Precision Collet ER 32 |
| 84.200.11 Open-end Wrench for Locknut ER 11 |
| 84.200.16 Open-end Wrench for Locknut ER 16 |
| 84.200.20 Open-end Wrench for Locknut ER 20 |
| 84.200.25 Wrench for Locknut ER 25 |
| 84.200.32 Wrench for Locknut ER 32 |
| 84.200.40 Wrench for Locknut ER 40 |
| 84.200.50 Wrench for Locknut ER 50 |
| 84.300.16 Pin Spanner for Locknut OZ 2-16 |
| 84.300.25 Pin Spanner for Locknut OZ 2-25 |
| 84.300.32 Pin Spanner for Locknut OZ 4-32 |
| 84.300.40 Pin Spanner for Locknut OZ 6-40 |
| 84.400.16 Wrench for Combination Shell End Mill Arbor D-16 mm |
| 84.400.22 Wrench for Combination Shell End Mill Arbor D-22 mm |
| 84.400.27 Wrench for Combination Shell End Mill Arbor D-27 mm |
| 84.400.32 Wrench for Combination Shell End Mill Arbor D-32 mm |
| 84.400.40 Wrench for Combination Shell End Mill Arbor D-40 mm |
| 84.400.50 Wrench for Combination Shell End Mill Arbor D-50 mm |
| 84.400.60 Wrench for Combination Shell End Mill Arbor D-60 mm |
| 84.500.25 Wrench for coolant tube HSK-25 |
| 84.500.32 Wrench for coolant tube HSK-32 |
| 84.500.40 Wrench for coolant tube HSK-40 |
| 84.500.50 Wrench for coolant tube HSK-50 |
| 84.500.63 Wrench for coolant tube HSK-63 |
| 84.500.80 Wrench for coolant tube HSK-80 |
| 84.500.10 Wrench for coolant tube HSK-100 |
| 84.500.125 Wrench for coolant tube HSK-125 |
| 84.702.40 Inserts for Holding Device HSK40 |
| 84.702.50 Inserts for Holding Device HSK50 |
| 84.702.63 Inserts for Holding Device HSK63 |
| 84.702.80 Inserts for Holding Device HSK80 |
| 84.702.10 Inserts for Holding Device HSK100 |
| 84.703.25 Inserts for Holding Device HSK-E25 |
| 84.703.32 Inserts for Holding Device HSK-C+E32 |
| 84.703.40 Inserts for Holding Device HSK-C+E40 |
| 84.703.50 Inserts for Holding Device HSK-C+E50 |
| 84.703.63 Inserts for Holding Device HSK-C+E63 |
| 84.703.80 Inserts for Holding Device HSK-C+E80 |
| 84.704.63.M Inserts for Holding Device HSK-F63 |
| 84.704.80.M Inserts for Holding Device HSK80 Makino |
| 84.705.40 Inserts for Holding Device PSC 40 |
| 84.705.50 Inserts for Holding Device PSC 50 |
| 84.705.60 Inserts for Holding Device PSC 63 |
| 84.706.4X100 Inserts for Holding Device KM4X100 |
| 85.100.06 Tightening Bolt for Weldon/ Whistle-Notch D-6 mm |
| 85.100.08 Tightening Bolt for Weldon/ Whistle-Notch D-8 mm |
| 85.100.10 Tightening Bolt for Weldon/ Whistle-Notch D-10 mm |
| 85.100.12 Tightening Bolt for Weldon/ Whistle-Notch D-12 mm, D-14 mm |
| 85.100.14 Tightening Bolt for Weldon/ Whsitle-Notch D-16 mm, D-18 mm |
| 85.100.16 Tightening Bolt for Weldon/ Whistle-Notch D-20 mm |
| 85.100.18 Tightening Bolt for Weldon/ Whistle-Notch D-25 mm |
| 85.100.18.1 Tightening Bolt for Weldon ultra short D-25 mm |
| 85.100.20 Tightening Bolt for Weldon/ Whistle-Notch D-32 mm;D-40 mm |
| 85.150.01 Adjustment Bolt Pos. 1 for Whistle-Notch SK |
| 85.150.02 Adjustment Bolt Pos. 2 for Whistle-Notch SK |
| 85.150.03 Adjustment Bolt Pos. 3 for Whistle-Notch SK |
| 85.150.04 Adjustment Bolt Pos. 4 for Whistle-Notch SK |
| 85.150.05 Adjustment Bolt Pos. 5 for Whistle-Notch SK |
| 85.150.06 Adjustment Bolt Pos. 6 for Whistle-Notch SK |
| 85.150.07 Adjustment Bolt Pos. 7 for Whistle-Notch SK |
| 85.150.08 Adjustment Bolt Pos. 8 for Whistle-Notch SK |
| 85.200.16 Driving Ring DIN 6366 for Tool Holder D-16 mm |
| 85.200.16.1 Driving Ring DIN 6366 for Tool Holder D-16 mm with extended pivot |
| 85.200.22 Driving Ring DIN 6366 for Tool Holder D-22 mm |
| 85.200.22.1 Driving Ring DIN 6366 for Tool Holder D-22 mm with extended pivot |
| 85.200.27 Driving Ring DIN 6366 for Tool Holder D-27 mm |
| 85.200.32 Driving Ring DIN 6366 for Tool Holder D-32 mm |
| 85.200.40 Driving Ring DIN 6366 for Tool Holder D-40 mm |
| 85.200.50 Driving Ring DIN 6366 for Tool Holder D-50 mm |
| 85.300.16 Tightening Bolt DIN 6367 for Tool Holder D-16 mm M8 |
| 85.300.22 Tightening Bolt DIN 6367 for Tool Holder D-22 mm M10 |
| 85.300.27 Tightening Bolt DIN 6367 for Tool Holder D-27 mm M12 |
| 85.300.32 Tightening Bolt DIN 6367 for Tool Holder D-32 mm M16 |
| 85.300.40 Tightening Bolt DIN 6367 for Tool Holder D-40 mm M20 |
| 85.300.50 Tightening Bolt DIN 6367 for Tool Holder D-50 mm M24 |
| 85.300.60 Tightening Bolt DIN 6367 for Tool Holder D-60 mm M30 |
| 85.400.16 Feather Key DIN 6885 for Tool Holder D-16 mm |
| 85.400.16.1 Feather Key DIN 6885 for Tool Holder D-16 mm with extended pivot |
| 85.400.22 Feather Key DIN 6885 for Tool Holder D-22 mm |
| 85.400.22.1 Feather Key DIN 6885 Form A 6 x 6 x 32 for Tool Holder D-22 mm with extended pivot |
| 85.400.27 Feather Key DIN 6885 for Tool Holder D-27 mm |
| 85.400.27.1 Feather Key DIN 6885 for Tool Holder D-27 mm with extended pivot |
| 85.400.32 Feather Key DIN 6885 for Tool Holder D-32 mm |
| 85.400.40 Feather Key DIN 6885 for Tool Holder D-40 mm |
| 85.400.50 Feather Key DIN 6885 for Tool Holder D-50 mm |
| 85.500.40 Conversion Kit SK40 |
| 85.500.50 Conversion Kit SK50 |
| 85.600.40 Plug for form B SK40 (50 pcs.) |
| 85.600.50 Plug for form B SK50 (50 pcs) |
| 86.100.30 Cone Cleaner for SK30/BT30 |
| 86.100.40 Cone Cleaner for SK40 |
| 86.100.50 Cone Cleaner for SK50 |
| 88.101.40 Pull Stud JIS/ BT40 MORI-SEIKI |
| 88.101.50 Pull Stud JIS/ BT50 MORI-SEIKI |
| 88.200.40 Pull Stud ISO7388-3 Form AD with drill through SK40 |
| 88.202.40 Pull Stud ISO7388-3 Form AF sealed SK40 |
| 88.202.50 Pull Stud ISO7388-3 Form AF sealed SK50 |
| 88.300.40 Pull Stud with OTT-Ringnut for SK40 with bore |
| 88.303.40 Pull Stud with OTT-Ringnut for SK40 with internal thread |
| 88.303.50 Pull Stud with OTT-Ringnut for SK50 with internal thread |
| 88.400.40 Pull Stud ISO7388-3 B form UD with drill through SK40 |
| 88.400.50 Pull Stud ISO7388-3 B form UD with drill through SK50 |
| 88.402.40 Pull Stud ISO 7388-3 form UF sealed SK40 |
| 88.402.50 Pull Stud ISO 7388-3 form UF sealed SK50 |
| 88.500.40 Pull Stud CAT 40 ANSI with drill through for MAZAK |
| 88.500.40.1 Pull Stud CAT 40 ANSI with drill through for MAZAK (with seal on frontside) |
| 88.500.50 Pull Stud CAT 50 ANSI with drill through |
| 88.600.40 Pull Stud with saw thread for SK40 |
| 88.601.30 Pull Stud ISO 7388-3 form JF without drill through BT30 |
| 88.601.40 Pull Stud ISO 7388-3 form JF without drill through BT40 |
| 88.601.40.1 Pull Stud similar ISO 7388-3 form JF without drill through BT40 |
| 88.601.50 Pull Stud ISO 7388-3 form JF without drill through BT50 |
| 88.603.40 Pull Stud ISO 7388-3 form JD with drill through BT40 |
| 88.603.50 Pull Stud ISO 7388-3 form JD with drill through BT50 |
| 88.605.30 Pull Stud ISO 7388-3 form JD with drill through BT30 |
| 88.605.40 Pull Stud ISO 7388-3 form JD with drill through BT40 |
| 88.604.30 Pull Stud ISO 7388-3 form JF without drill through BT30 |
| 88.604.40 Pull Stud ISO 7388-3 form JF without drill through BT40 |
| 88.604.50 Pull Stud ISO 7388-3 form JF without drill through BT50 |
| 88.700.40 Pull Stud JIS/BT40 with drill through |
| 88.701.40 Pull Stud JIS/BT40 with drill through (sealed) |
| 88.700.50 Pull Stud JIS/BT50 with bore |
| 88.800.40 Pull Stud ISO 7388 with bore |
| 88.800.50 Pull Stud ISO 7388 with bore |
| 88.900.40.1 Pull Stud MAZAK – CAT 40 |
| 85.700.32 Coolant Tube for HSK-A32 with 2 packing rings |
| 85.700.40 Coolant Tube for HSK-A40 with 2 packing rings |
| 85.700.50 Coolant Tube for HSK-A50 with 2 packing rings |
| 85.700.63 Coolant Tube for HSK-A63 with 2 packing rings |
| 85.700.80 Coolant Tube for HSK-A80 with 2 packing rings |
| 85.700.10 Coolant Tube for HSK-A100 with 2 packing rings |
| 85.700.125 Coolant Tube for HSK-A125 with 2 packing rings |
| 85.820.32 Cone Cleaner for HSK32 |
| 85.820.40 Cone Cleaner for HSK40 |
| 85.820.50 Cone Cleaner for HSK50 |
| 85.820.63 Cone Cleaner for HSK63 |
| 85.820.80 Cone Cleaner for HSK80 |
| 85.820.10 Cone Cleaner for HSK100 |
| 85.810.12.1 Adjustment Bolt for Shrink Fit Chuck D-6 mm |
| 85.810.12.4 Long Adjustment Bolt for Shrink Fit Chuck D-6mm |
| 85.810.15.1 Adjustment Bolt for Shrink Fit Chuck D-8 mm |
| 85.810.15.4 Long Adjustment Bolt for Shrink Fit Chuck D-8 mm |
| 85.810.18.2 Adjustment Bolt for Shrink Fit Chuck D-10 mm |
| 85.810.18.4 Long Adjustment Bolt for Shrink Fit Chuck D-10 mm |
| 85.810.21.2 Adjustment Bolt for Shrink Fit Chuck D-12 mm |
| 85.810.21.4 Long Adjustment Bolt for Shrink Fit Chuck D-12 mm |
| 85.810.23.1 Adjustment Bolt for Shrink Fit Chuck D-12/14 mm |
| 85.810.24.2 Adjustment Bolt for Shrink Fit Chuck D-12/14 mm |
| 85.810.25.2 Adjustment Bolt for Shrink Fit Chuck D-18 mm |
| 85.810.25.4 Long Adjustment Bolt for Shrink Fit Chuck D-18 mm |
| 85.810.27.2 Adjustment Bolt for Shrink Fit Chuck D-16 mm |
| 85.810.27.4 Long Adjustment Bolt for Shrink Fit Chuck D-16 mm |
| 85.810.36.2 Adjustment Bolt for Shrink Fit Chuck D-10 mm |
| 85.810.37.2 Adjustment Bolt for Shrink Fit Chuck D-20/25/32 mm |
| 85.810.37.4 Long Adjustment Bolt for Shrink Fit Chuck D-18 mm |
| 85.810.38.2 Adjustment Bolt for Shrink Fit Chuck D-16/18 mm |
| 85.810.39.2 Adjustment Bolt for Shrink Fit Chuck D-12 mm |
| 85.810.40.1 Adjustment Bolt for Shrink Fit Chuck D-16 mm |
| 85.810.40.4 Long Adjustment Bolt for Shrink Fit Chuck D-16 mm |
| 85.810.43.2 Adjustment Bolt for Shrink Fit Chuck D-20 mm |
| 85.810.43.4 Long Adjustment Bolt for Shrink Fit Chuck D-20 mm |
| 85.810.46.2 Adjustment Bolt for Shrink Fit Chuck D-25 mm |
| 85.810.51.2 Adjustment Bolt for Shrink Fit Chuck D-20 mm |
| 85.810.52.2 Adjustment Bolt for Shrink Fit Chuck D-20 to D-32 mm |
| 85.810.52.4 Long Adjustment Bolt for Shrink Fit Chuck D-20 to D-32 mm |
| 85.810.12.3 Adjustment Bolt for Power Shrink Chuck D-6 mm |
| 85.810.15.3 Adjustment Bolt for Power Shrink Chuck D-8 mm |
| 85.810.18.3 Adjustment Bolt for Power Shrink Chuck D-10 mm |
| 85.810.21.3 Adjustment Bolt for Power Shrink Chuck D-14 mm |
| 85.810.40.3 Adjustment Bolt for Power Shrink Chuck D-18 mm |
| 85.810.43.3 Adjustment Bolt for Power Shrink Chuck D-20 mm |
| 85.810.46.3 Adjustment Bolt for Power Shrink Chuck D-25 mm/D-32 mm |
| 85.810.48.3 Adjustment Bolt for Power Shrink Chuck D-12 mm |
| 85.810.48.3.1 Adjustment Bolt for Power Shrink Chuck D-12 mm |
| 85.810.49.3 Adjustment Bolt for Power Shrink Chuck D-16 mm |
| 85.810.49.3.1 Adjustment Bolt for Power Shrink Chuck D-16 mm |
| 85.810.51.3 Adjustment Bolt for Power Shrink Chuck D-20 mm |
| 85.810.52.3 Adjustment Bolt for Power Shrink Chuck D-25 mm/D-32 mm |
| 85.800.34 Adjustment Bolt for Collet Chuck ER 16, 20, 25 |
| 85.800.35 Adjustment Bolt for Collet Chuck ER 32, 40 |
| 85.810.02 Adjustment Bolt for Whistle-Notch D-6 mm |
| 85.810.05 Adjustment Bolt for Whistle-Notch D-8 mm |
| 85.810.09 Adjustment Bolt for Whistle-Notch D-10 mm |
| 85.810.14 Adjustment Bolt for Whistle-Notch D-8 mm |
| 85.810.18 Adjustment Bolt for Whistle-Notch D-8 mm |
| 85.810.36 Adjustment Bolt for Whistle-Notch D-10 mm |
| 86.100.01 Cone Cleaner for MK 1 |
| 86.100.02 Cone Cleaner for MK 2 |
| 86.100.03 Cone Cleaner for MK 3 |
| 86.100.04 Cone Cleaner for MK 4 |
| 84.801.00 Work bench setup module with perforate plate-rear wall |
| 84.801.00.3 Work bench setup module with perforate plate-rear wall |
| 84.801.01 Work bench setup modul with drawer cupboard |
| 84.801.01.3 Work bench setup modul with drawer cupboard |
| 84.801.02 Work bench setup module with PC- holder and monitor support |
| 84.801.02.3 Work bench setup module with PC- holder and monitor support |
| 84.801.03 Work bench setup module with drawer cupboard, PC holder and monitor support |
| 84.801.03.3 Work bench setup module with drawer cupboard, PC holder and monitor support |
| 84.801.04 Work bench setup module with Paper unwinder |
| 84.801.04.3 Work bench setup module with Paper unwinder |
| 84.801.05 Work bench setup module with drawer cupboard and Paper unwinder |
| 84.801.05.3 Work bench setup module with drawer cupboard and Paper unwinder |
| 84.801.06 Work bench setup module with drawer cupboard, PC holder, Paper unwinder and screen holder |
| 84.801.06.3 Work bench setup module with drawer cupboard, PC holder, Paper unwinder and screen holder |
| 84.801.07 Work bench setup module with waste disposal module |
| 84.801.07.3 Work bench setup module with waste disposal module |
| 84.801.08 Work bench setup module with waste disposal module, Paper unwinder |
| 84.801.08.3 Work bench setup module with waste disposal module, Paper unwinder |
| 84.802.00 Corner Module |
| 84.802.00.3 Corner Module |
| 84.803.00 Assembly station octagonal |
| 84.803.00.3 Assembly station octagonal |
| 84.807.00 Work bench module dropped |
| 84.807.00.3 Work bench module dropped |
| 84.806.00 Connection part 50 cm wide |
| 84.806.00.3 Connection part 50 cm wide |
| 84.806.03 Connection part 100 cm wide |
| 84.806.03.3 Connection part 100 cm wide |
| 84.806.01 Connection part 100 cm wide for Tool Dynamic TD Preset |
| 84.806.01.3 Connection part 100 cm wide for Tool Dynamic TD Preset |
| 84.806.02 Lighting bar superstructure for Power Clamp Premium Plus |
| 84.806.02.3 Lighting bar superstructure for Power Clamp Premium Plus |
| 84.806.05 Stabilisation part |
| 84.804.00 Magazine cabinet |
| 84.804.00.3 Magazine cabinet |
| 84.805.01 Shelf module with hood |
| 84.805.01.3 Shelf module with hood |
| 84.805.06 Vertical cabinet with 2 perforated panel extracts |
| 84.805.06.3 Vertical cabinet with 2 perforated panel extracts |
| 84.805.07 Vertical cabinet with 4 extracts |
| 84.805.07.3 Vertical cabinet with 4 extracts |
| 84.805.00.01 Additional shelf for shelf cabinet with stop bar |
| 84.805.00.01.3 Additional shelf for shelf cabinet with stop bar |
| 84.805.00.03 Shelf for grinding wheels for shelf cabinet to hold 2 wheels: support to swing out |
| 84.805.00.03.3 Shelf for grinding wheels for shelf cabinet to hold 2 wheels: support to swing out |
| 84.805.07.01 Frame to hold the shelves in the 4 compartment vertical cabinet |
| 84.805.07.02 Frame to hold the shelves in the 2 compartment vertical cabinet |
| 84.805.07.032 Shelves for 4 compartment vertical cabinet: to hold 12 SK30 / BT30 / CAT30 |
| 84.805.07.040 Shelves for 4 compartment vertical cabinet: to hold 4 SK40 / BT40 / CAT40 |
| 84.805.07.041 Shelves for 4 compartment vertical cabinet: to hold 6 SK40 / BT40 / CAT40 |
| 84.805.07.042 Shelves for 4 compartment vertical cabinet: to hold 12 SK40 / BT40 / CAT40 |
| 84.805.07.050 Shelves for 4 compartment vertical cabinet: to hold 4 SK50 / BT50 / CAT50 |
| 84.805.07.051 Shelves for 4 compartment vertical cabinet: to hold 5 SK50 / BT50 / CAT50 |
| 84.805.07.110 Shelves for 4 compartment vertical cabinet: to hold 4 HSK-A / C / E 100 |
| 84.805.07.111 Shelves for 4 compartment vertical cabinet: to hold 5 HSK-A / C / E 100 |
| 84.805.07.125 Shelves for 4 compartment vertical cabinet: to hold 4 HSK-A / C / E 125 |
| 84.805.07.132 Shelves for 4 compartment vertical cabinet: to hold 16 HSK-A / C / E 32 |
| 84.805.07.140 Shelves for 4 compartment vertical cabinet: to hold 16 HSK-A / C / E 40 |
| 84.805.07.141 Shelves for 4 compartment vertical cabinet: to hold 4 HSK-A / C / E 40 |
| 84.805.07.150 Shelves for 4 compartment vertical cabinet: to hold 12 HSK-A / C / E 50 |
| 84.805.07.163 Shelves for 4 compartment vertical cabinet: to hold 4 HSK-A / C / E 63 |
| 84.805.07.164 Shelves for 4 compartment vertical cabinet: to hold 6 HSK-A / C / E 63 |
| 84.805.07.165 Shelves for 4 compartment vertical cabinet: to hold 12 HSK-A / C / E 63 |
| 84.805.07.181 Shelves for 4 compartment vertical cabinet: to hold 5 HSK-A / C / E 80 |
| 84.805.07.230 Shelves for 4 compartment vertical cabinet: to hold 12 PSC 32 |
| 84.805.07.240 Shelves for 4 compartment vertical cabinet: to hold 12 PSC 40 |
| 84.805.07.250 Shelves for 4 compartment vertical cabinet: to hold 12 PSC 50 |
| 84.805.07.260 Shelves for 4 compartment vertical cabinet: to hold 6 PSC 63 |
| 84.805.07.325 Shelves for 4 compartment vertical cabinet: to hold 4 VDI25 |
| 84.805.07.340 Shelves for 4 compartment vertical cabinet: to hold 4 VDI40 |
| 84.805.07.401 Shelves for 4 compartment vertical cabinet: to hold 3 Balancing Adapters |
| 84.805.07.680 Shelves for 4 compartment vertical cabinet: to hold 5 Makino F80 |
| 84.811.00 Electronic system set |
| 84.810.17 Starterset Mini |
| 84.810.17.1 Starterset Medium |
| 84.810.17.2 Starterset Large |
| 84.808.00 Tool holder rack without tool holder carrier |
| 84.808.00.3 Tool holder rack without tool holder carrier |
| 84.808.00.01 8 pcs. Tool holder carrier for tool holder rack without recess to hold plastic cups 84.810.14 |
| 84.808.00.030 8 pcs. Tool holder carrier for tool holder rack with recess to hold 5 SK30 per carrier |
| 84.808.00.040 8 pcs. Tool holder carrier for tool holder rack with recess to hold 5 SK40 per carrier |
| 84.808.00.050 8 pcs. Tool holder carrier for tool holder rack with recess to hold 4 SK50 per carrier |
| 84.808.00.130 8 pcs. Tool holder carrier for tool holder rack with recess to hold 5 BT30 per carrier |
| 84.808.00.140 8 pcs. Tool holder carrier for tool holder rack with recess to hold 4 BT40 per carrier |
| 84.808.00.150 8 pcs. Tool holder carrier for tool holder rack with recess to hold 4 BT50 per carrier |
| 84.808.00.240 8 pcs. Tool holder carrier for tool holder rack with recess to hold 4 CAT40 per carrier |
| 84.808.00.250 8 pcs. Tool holder carrier for tool holder rack with recess to hold 4 CAT50 per carrier |
| 84.808.00.310 8 pcs. Tool holder carrier for tool holder rack with recess to hold 4 HSK-A / E / F 100 per carrier |
| 84.808.00.332 8 pcs. Tool holder carrier for tool holder rack with recess to hold 5 HSK-A / E / F 32 per carrier |
| 84.808.00.340 8 pcs. Tool holder carrier for tool holder rack with recess to hold 5 HSK-A / E / F 40 per carrier |
| 84.808.00.350 8 pcs. Tool holder carrier for tool holder rack with recess to hold 5 HSK-A / E / F 50 per carrier |
| 84.808.00.363 8 pcs. Tool holder carrier for tool holder rack with recess to hold 5 HSK-A / E / F 63 per carrier |
| 84.808.00.380 8 pcs. Tool holder carrier for tool holder rack with recess to hold 4 HSK-A / E / F 80 per carrier |
| 84.808.00.460 8 pcs. Tool holder carrier for tool holder rack with recess to hold 5 PSC 63 per carrier |
| 84.809.011 1 pce. Holder jowl for 21 pcs. ER 11 collets |
| 84.809.016 1 pce. Holder jowl for 17 pce. ER 16 collets |
| 84.809.020 1 pce. Holder jowl for 12 pce. ER 20 collets |
| 84.809.025 1 pce. Holder jowl for 12 pce. ER 25 collets |
| 84.809.032 1 pce. Holder jowl for 11 pce. ER 32 collets |
| 84.809.040 1 pce. Holder jowl for 8 pce. ER 40 collets |
| 84.809.116 1 pce. Holder jowl for 15 pce. OZ 2-16 collets |
| 84.809.125 1 pce. Holder jowl for 11 pce. OZ 2-25 collets |
| 84.809.132 1 pce. Holder jowl for 8 pce. OZ 6-32 collets |
| 84.809.140 1 pce. Holder jowl for 7 pce. OZ 8-40 collets |
| 84.809.150 1 pce. Holder jowl for 6 pce OZ 4-50 collets |
| 84.809.201 1 pce. Holder jowl for 16 pce. HG-01 collets |
| 84.809.202 1 pce. Holder jowl for 16 pce. HG-02 collets |
| 84.809.203 1 pce. Holder jowl for 13 pce. HG-03 collets |
| 84.810.01 5 pcs. Tool holder simple (hook 22 mm long x 3 mm) |
| 84.810.02 5 pcs. Tool holder simple (hook 24 mm long x 5 mm) |
| 84.810.03 5 pcs. Tool holder twice (hook 55 mm long x 25 mm wide) |
| 84.810.04 5 pcs. Tool holder twice (hook 50 mm long x 40 mm wide) |
| 84.810.05 5 pcs. Joint key clamp (Clamp 28 mm long x 3 mm) |
| 84.810.06 5 pcs. Tool clamp (for clamp 12 mm) |
| 84.810.07 5 pcs. Tool clamp (for clamp 25 mm) |
| 84.810.08 5 pcs. Ring-holder (ring inside 40 mm) |
| 84.810.09 5 pce. Basic disc |
| 84.810.10 1 pcs. Holder for Screwdriver for 6 screwdrivers |
| 84.810.11 1 pcs. Holder for screw-wrench for 12 screw-wrenches |
| 84.810.12 1 pcs. Holder for clear film |
| 84.810.13.3 1 pce. Storage place (440 mm x 300 mm x 100 mm), white |
| 84.810.14 12 pcs. Mountings for drawer (plastic blue) sufficient for 1 drawer at the magazine cabinet |
| 84.810.15 24 pce. Part from the Mountings for drawer (plastic blue) |
| 84.810.16 5 pcs. Holder for claws (70 mm long x 25 mm wide) |
| 84.810.18 Work pad 600 mm x 1500 mm |
| 84.810.19 Work pad corner module |
| 84.810.20 Work pad 690 mm x 500 mm |
| 84.810.22 1 pce. Bench vise, color: black |
| 84.810.23 Paper unwinder |
| 91.100.03 Coolant bore at Face |
| 91.100.04 Chip bore hole |
| 91.100.06 Data-Lock — mechanical Data carrier locking system (Mounting on HAIMER holders incl. fine-balancing) |
| 91.100.07 Data-Lock — mechanical Data carrier locking system (Mounting on different holders or holders without chip bore incl. fine-balancing) |
| 91.100.10 Fine balancing, Tool Holders pre-balanced |
| 91.100.20 Glue in data chip |
| 91.100.22 Additional laser writing |
| 91.100.24 Cool Jet (2 bores) for Shrink Fit Chucks 6-14, Weldon 6-20 and HG-Chucks |
| 91.100.25 Cool Jet (3 bores) for Shrink Fit Chucks 16-32 |
| 91.100.26 Cool Jet (4 bores) for Weldon 25-40 and Whistle Notch 25-40 |
| 91.100.27 Cool Jet for Power Collets |
| 91.100.39.1 Adding Safe-Lock to Power Shrink Chucks 6–40 mm |
| 91.100.39.2 Adding Safe-Lock to Power Shrink Chucks 50 mm |
| 91.100.41 Cool Flash Upgrade (incl. Cool Jet bores) |
| 91.100.42 Subsequent mounting of 4 cooling slots |
| 91.100.43 Subsequent mounting of 4 Rother-cooling slots |
| 86.370.06 Adding Safe-Lock 6 mm |
| 86.370.08 Adding Safe-Lock 8 mm |
| 86.370.10 Adding Safe-Lock 10 mm |
| 86.370.12 Adding Safe-Lock 12 mm |
| 86.370.14 Adding Safe-Lock 14 mm |
| 86.370.16 Adding Safe-Lock 16 mm |
| 86.370.18 Adding Safe-Lock 18 mm |
| 86.370.20 Adding Safe-Lock 20 mm |
| 86.370.25 Adding Safe-Lock 25 mm |
| 86.370.32 Adding Safe-Lock 32 mm |
| 86.370.40 Adding Safe-Lock 40 mm |
| 86.370.50 Adding Safe-Lock 50 mm |
| DL20F4002MN2000C DL20F4002MN2000C |
| DL20F4003MN2000C DL20F4003MN2000C |
| DL20F1004MN2000C DL20F1004MN2000C |
| A.63.160.009 A.63.160.009 |
| M-R1010 Адаптер для устройства предварительной настройки SK50 : HSK ACET 32 / BDF 40 (без зажима) |
| M-R1034 Адаптер для устройства предварительной настройки SK50 : HSK ACET 32 / BDF 40 Klemmung (с зажимом) |
Продукция компании HAIMER
Инструментальные оправки HAIMER
Аксессуары HAIMER